Increasing pressure on freshwater resources due to terrestrial feed ingredients for aquaculture production.

Science.gov (United States)

Pahlow, M; van Oel, P R; Mekonnen, M M; Hoekstra, A Y

2015-12-01

As aquaculture becomes more important for feeding the growing world population, so too do the required natural resources needed to produce aquaculture feed. While there is potential to replace fish meal and fish oil with terrestrial feed ingredients, it is important to understand both the positive and negative implications of such a development. The use of feed with a large proportion of terrestrial feed may reduce the pressure on fisheries to provide feed for fish, but at the same time it may significantly increase the pressure on freshwater resources, due to water consumption and pollution in crop production for aquafeed. Here the green, blue and gray water footprint of cultured fish and crustaceans related to the production of commercial feed for the year 2008 has been determined for the major farmed species, representing 88% of total fed production. The green, blue and gray production-weighted average feed water footprints of fish and crustaceans fed commercial aquafeed are estimated at 1629 m3/t, 179 m3/t and 166 m3/t, respectively. The estimated global total water footprint of commercial aquafeed was 31-35 km3 in 2008. The top five contributors to the total water footprint of commercial feed are Nile tilapia, Grass carp, Whiteleg shrimp, Common carp and Atlantic salmon, which together have a water footprint of 18.2 km3. An analysis of alternative diets revealed that the replacement of fish meal and fish oil with terrestrial feed ingredients may further increase pressure on freshwater resources. At the same time economic consumptive water productivity may be reduced, especially for carnivorous species. The results of the present study show that, for the aquaculture sector to grow sustainably, freshwater consumption and pollution due to aquafeed need to be taken into account. Copyright © 2015. Published by Elsevier B.V.

Enhancement in secondary particulate matter production due to mountain trapping

Science.gov (United States)

Yao, Teng; Fung, J. C. H.; Ma, H.; Lau, A. K. H.; Chan, P. W.; Yu, J. Z.; Xue, J.

2014-10-01

As China's largest economic development zone, the Pearl River Delta (PRD) is subject to particulate matter (PM) and visibility deterioration problems. Due to high PM concentration, haze days impacting ambient visibility have occurred frequently in this region. Besides visibility impairment, PM pollution also causes a negative impact on public health. These negative impacts have heightened the need to improve our understanding of the PM pollution of the PRD region. One major cause of the PRD pollution problem is cold front passages in the winter; however, the mechanism of pollution formation stays unclear. In this study, the Comprehensive Air Quality Model (CAMx) is utilized to investigate the detailed PM production and transport mechanisms in the PRD. Simulated concentrations of PM2.5 species, which have a good correlation with observation, show that sulfate and nitrate are the dominant pollutants among different PM2.5 species. Before the cold front passage a large amount of gas-phase and particle-phase pollutants are transported to the mountainous regions in the north of the PRD, and become trapped by the terrain. Over the mountain regions, cloud driven by upwelling flow promotes aqueous-phase reactions including oxidations of PM precursors such as SO2 and NO2. By this process, production of secondary PM is enhanced. When the cold front continues to advance further south, PM is transported to the PRD cities, and suppressed into a thin layer near the ground by a low planetary boundary layer (PBL). Thus high PM concentration episodes take place in the PRD cities. After examining production and transportation pathways, this study presents that the complex terrain configuration would block pollutant dispersion, provide cloudy environment, and advance secondary PM production. Previous studies have pointed out that pollution emitted from outside this region largely influences the air quality in the PRD; however, this study shows that pollutants from the outside could be

[Renal cell carcinoma producing erythrocytosis due to inappropriate production of erythropoietin].

Science.gov (United States)

Villanueva-Gimeno, M M; Vicario-Bermúdez, J M; Fonseca-López, Ch; Caballero-Castro, J P; Zabala-López, S I; Sánchez-Elipe, M A; González-Gómez, N

2013-01-01

Erythrocytosis, or polycythaemia, is an increase, in absolute terms, of the erythrocyte mass. The most common solid tumour related to this phenomenon is renal cell carcinoma, which can produce erythrocytosis by increasing erythropoietin production. About 30% of symptomatic renal cell carcinomas are diagnosed due to the appearance of a paraneoplastic syndrome. Polycythaemia is one of these. Surgery, (radical or partial nephrectomy), is the treatment of choice in renal cell carcinoma and helps to keep the erythrocytosis situation under control. Copyright © 2011 Sociedad Española de Médicos de Atención Primaria (SEMERGEN). Publicado por Elsevier España. All rights reserved.

Production of charmed particles in nuN collisions due to neutral weak currents

International Nuclear Information System (INIS)

Rekalo, M.P.

1980-01-01

A study is made of associated production of charmed particles in neutrino-nucleon interactions due to neutral weak currents. The angular distribution of the jets of charmed hadrons in nN interactions is determined in the lowest approximation in the quark-gluon coupling constant, according to which a charmed quark and antiquark are produced in an annihilation of a vector gluon and a virtual Z boson. It is shown that only a P-even dependence on the azimuthal angle v occurs in the studied approximation, the P-odd dependence which is possible in the general case being equal to zero. The total cross section for charmed-particle production in neutrino-nucleon interactions is calculated, and the origin of the violation of scale invariance is demonstrated

Complex analysis of hazards to the man and natural environment due to electricity production in nuclear and coal power plants

International Nuclear Information System (INIS)

Strupczewski, A.

1990-01-01

The report presents a complex analysis of hazards connected with electrical energy production in nuclear power plants and coal power plants, starting with fuel mining, through power plant construction, operation, possible accidents and decommissioning to long term global effects. The comparison is based on contemporary, proven technologies of coal fired power plants and nuclear power plants with pressurized water reactors. The hazards to environment and man due to nuclear power are shown to be much smaller than those due to coal power cycle. The health benefits due to electrical power availability are shown to be much larger than the health losses due to its production. (author). 71 refs, 17 figs, 12 tabs

Measurement of HOx· production rate due to radon decay in air

International Nuclear Information System (INIS)

Ding, Huiling.

1993-08-01

Radon in indoor air may cause the exposure of the public to excessive radioactivity. Radiolysis of water vapor in indoor air due to radon decay could produce (·OH and HO 2 ·) that may convert atmospheric constituents to compounds of lower vapor pressure. These lower vapor pressure compounds might then nucleate to form new particles in the indoor atmosphere. Chemical amplification was used to determine HO x · production rate in indoor air caused by radon decay. Average HO x · production rate was found to be (4.31±0.07) x 10 5 HO x · per Rn decay per second (Bq) 3.4 to 55.0% at 22C. This work provided G (HO x ·) -value, 7.86±0.13 No./100 eV in air by directly measuring [HO x ·] formed from the radiolysis procedure. This G value implies that HO x · produced by radon decay in air might be formed by multiple processes and may be result of positive ion-molecule reactions, primary radiolysis, and radical reactions. There is no obvious relation between HO x · production rate and relative humidity. A laser-induced fluorescence (LIF) system has been used for ·OH production rate measurement; it consists of an excimer laser, a dye laser, a frequency doubler, a gaseous fluorescence chamber, and other optical and electronic parts. This system needs to be improved to eliminate the interferences of light scattering and artificial ·OH produced from the photolysis of O 3 /H 2 O

Crop production and economic loss due to wind erosion in hot arid ecosystem of India

Science.gov (United States)

Santra, Priyabrata; Moharana, P. C.; Kumar, Mahesh; Soni, M. L.; Pandey, C. B.; Chaudhari, S. K.; Sikka, A. K.

2017-10-01

Wind erosion is a severe land degradation process in hot arid western India and affects the agricultural production system. It affects crop yield directly by damaging the crops through abrasion, burial, dust deposition etc. and indirectly by reducing soil fertility. In this study, an attempt was made to quantify the indirect impact of wind erosion process on crop production loss and associated economic loss in hot arid ecosystem of India. It has been observed that soil loss due to wind erosion varies from minimum 1.3 t ha-1 to maximum 83.3 t ha-1 as per the severity. Yield loss due to wind erosion was found maximum for groundnut (Arachis hypogea) (5-331 kg ha-1 yr-1), whereas minimum for moth bean (Vigna aconitifolia) (1-93 kg ha-1 yr-1). For pearl millet (Pennisetum glaucum), which covers a major portion of arable lands in western Rajasthan, the yield loss was found 3-195 kg ha-1 yr-1. Economic loss was found higher for groundnut and clusterbean (Cyamopsis tetragonoloba) than rest crops, which are about

75 FR 64314 - Product Development Program for Interventions in Patients With Severe Bleeding Due to Trauma or...

Science.gov (United States)

2010-10-19

... this public workshop is to discuss possible paradigms for the evaluation of products indicated for use...-available basis beginning at 7:30 a.m. If you need special accommodations due to a disability, please...

Productivity loss due to overweight and obesity: a systematic review of indirect costs.

Science.gov (United States)

Goettler, Andrea; Grosse, Anna; Sonntag, Diana

2017-10-05

The increasingly high levels of overweight and obesity among the workforce are accompanied by a hidden cost burden due to losses in productivity. This study reviews the extent of indirect cost of overweight and obesity. A systematic search was conducted in eight electronic databases (PubMed, Cochrane Library, Web of Science Core Collection, PsychInfo, Cinahl, EconLit and ClinicalTrial.gov). Additional studies were added from reference lists of original studies and reviews. Studies were eligible if they were published between January 2000 and June 2017 and included monetary estimates of indirect costs of overweight and obesity. The authors reviewed studies independently and assessed their quality. Of the 3626 search results, 50 studies met the inclusion criteria. A narrative synthesis of the reviewed studies revealed substantial costs due to lost productivity among workers with obesity. Especially absenteeism and presenteeism contribute to high indirect costs. However, the methodologies and results vary greatly, especially regarding the cost of overweight, which was even associated with lower indirect costs than normal weight in three studies. The evidence predominantly confirms substantial short-term and long-term indirect costs of overweight and obesity in the absence of effective customised prevention programmes and thus demonstrates the extent of the burden of obesity beyond the healthcare sector. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Productivity cost due to postpartum ill health: A cross-sectional study in Sri Lanka.

Science.gov (United States)

Wickramasinghe, Nuwan Darshana; Horton, Jennifer; Darshika, Ishani; Galgamuwa, Kaushila Dinithi; Ranasinghe, Wasantha Pradeep; Agampodi, Thilini Chanchala; Agampodi, Suneth Buddhika

2017-01-01

Even though postpartum morbidity continues to cause high disease burden in maternal morbidity and mortality across the globe, the literature pertaining to resultant productivity loss is scarce. Hence, the present study aimed at determining the productivity loss and associated cost of episodes of postpartum ill health. A cross sectional study was conducted in two Medical Officer of Heath areas in the Anuradhapura district, Sri Lanka in 2011, among 407 women residing in Anuradhapura district with an infant aged between 8 to 24 weeks. Validated interviewer administered questionnaires, including the IMMPACT productivity cost tool, were used to collect data on self-reported episodes of postpartum ill health. The productivity loss was calculated as the sum of days lost due to partial and total incapacitation. The adjusted productivity loss for coping strategies was calculated. Productivity cost, both total and adjusted, were calculated based on the mean daily per capita income of the study sample. Of the 407 participants, 161(39.6%) reported at least one episode of postpartum illness. Hospitalisations were reported by 27 (16.8%) of all symptomatic postpartum women. Common symptoms of postpartum ill health were pain/infection at either episiotomy or surgical site (n = 44, 27.3%), lower abdominal pain (n = 40, 24.8%) and backache (n = 27, 16.8%). The mean productivity loss per episode of ill health was 15 days (SD = 7.8 days) and the mean productivity loss per episode after adjusting for coping strategies was 7.9 days (SD = 4.4 days). The mean productivity cost per an episode was US$ 34.2(95%CI US$ 26.7-41.6) and the mean productivity cost per an episode after adjusting for coping strategies was US$ 18.0 (95%CI US$ 14.1-22.0). The prevalence of self-reported postpartum ill health, associated productivity loss and cost were high in the study sample and the main contributors were preventable conditions including pain and infection. Thus, effective pain management and proper

Integrated batch production and maintenance scheduling for multiple items processed on a deteriorating machine to minimize total production and maintenance costs with due date constraint

Directory of Open Access Journals (Sweden)

Zahedi Zahedi

2016-04-01

Full Text Available This paper discusses an integrated model of batch production and maintenance scheduling on a deteriorating machine producing multiple items to be delivered at a common due date. The model describes the trade-off between total inventory cost and maintenance cost as the increase of production run length. The production run length is a time bucket between two consecutive preventive maintenance activities. The objective function of the model is to minimize total cost consisting of in process and completed part inventory costs, setup cost, preventive and corrective maintenance costs and rework cost. The problem is to determine the optimal production run length and to schedule the batches obtained from determining the production run length in order to minimize total cost.

The radioactive contamination of milk and milk products due to the Chernobyl reactor accident

International Nuclear Information System (INIS)

Wiechen, A.

1987-01-01

The situation in the area around the town of Kiel in a given period of time is taken as the example to explain the radioactive contamination of milk and milk products due to the Chernobyl fallout. The measured data reported refer to the nuclides I-131 and Cs-137 in milk, and are compared with data on the I-131 and Cs-137 activity measured in raw milk collected in southern Bavaria, and in other Lands of the F.R.G. (DG) [de

Evaluation of the electric power production cost growth due to decommissioning of nuclear power plants

International Nuclear Information System (INIS)

Basso, G.

1982-01-01

The increase of production cost for electric power generated by nuclear plants, due to their decommissioning and the end of operating life, is analysed in respect to (a) waiting time from indefinite shut-down date to the start of dismantlement, (b) financing method, (c) interest and inflation rates. The analysis shows that the additional cost is always small for those solutions which have higher probability to be adopted

Uncertainty in techno-economic estimates of cellulosic ethanol production due to experimental measurement uncertainty

Directory of Open Access Journals (Sweden)

Vicari Kristin J

2012-04-01

Full Text Available Abstract Background Cost-effective production of lignocellulosic biofuels remains a major financial and technical challenge at the industrial scale. A critical tool in biofuels process development is the techno-economic (TE model, which calculates biofuel production costs using a process model and an economic model. The process model solves mass and energy balances for each unit, and the economic model estimates capital and operating costs from the process model based on economic assumptions. The process model inputs include experimental data on the feedstock composition and intermediate product yields for each unit. These experimental yield data are calculated from primary measurements. Uncertainty in these primary measurements is propagated to the calculated yields, to the process model, and ultimately to the economic model. Thus, outputs of the TE model have a minimum uncertainty associated with the uncertainty in the primary measurements. Results We calculate the uncertainty in the Minimum Ethanol Selling Price (MESP estimate for lignocellulosic ethanol production via a biochemical conversion process: dilute sulfuric acid pretreatment of corn stover followed by enzymatic hydrolysis and co-fermentation of the resulting sugars to ethanol. We perform a sensitivity analysis on the TE model and identify the feedstock composition and conversion yields from three unit operations (xylose from pretreatment, glucose from enzymatic hydrolysis, and ethanol from fermentation as the most important variables. The uncertainty in the pretreatment xylose yield arises from multiple measurements, whereas the glucose and ethanol yields from enzymatic hydrolysis and fermentation, respectively, are dominated by a single measurement: the fraction of insoluble solids (fIS in the biomass slurries. Conclusions We calculate a $0.15/gal uncertainty in MESP from the TE model due to uncertainties in primary measurements. This result sets a lower bound on the error bars of

Impact of residual by-products from tungsten film deposition on process integration due to nonuniformity of the tungsten film

CERN Document Server

Sidhwa, A; Gandy, T; Melosky, S; Brown, W; Ang, S; Naseem, H; Ulrich, R

2002-01-01

The effects of residual by products from a tungsten film deposition process and their impact on process integration due to the nonuniformity of the tungsten film were investigated in this work. The tungsten film deposition process involves three steps: nucleation, stabilization, and tungsten bulk fill. Six experiments were conducted in search for a solution to the problem. The resulting data suggest that excess nitrogen left in the chamber following the tungsten nucleation step, along with residual by products, causes a shift in the tungsten film uniformity during the tungsten bulk fill process. Data reveal that, due to the residual by products, an abnormal grain growth occurs causing a variation in the tungsten thickness across the wafer during the bulk fill step. Although several possible solutions were revealed by the experiments, potential integration problems limited the acceptable solutions to one. The solution chosen was the introduction of a 10 s pumpdown immediately following the nucleation step. Thi...

Quantifying the climate impacts of albedo changes due to biofuel production: a comparison with biogeochemical effects

Science.gov (United States)

Caiazzo, Fabio; Malina, Robert; Staples, Mark D.; Wolfe, Philip J.; Yim, Steve H. L.; Barrett, Steven R. H.

2014-01-01

Lifecycle analysis is a tool widely used to evaluate the climate impact of greenhouse gas emissions attributable to the production and use of biofuels. In this paper we employ an augmented lifecycle framework that includes climate impacts from changes in surface albedo due to land use change. We consider eleven land-use change scenarios for the cultivation of biomass for middle distillate fuel production, and compare our results to previous estimates of lifecycle greenhouse gas emissions for the same set of land-use change scenarios in terms of CO2e per unit of fuel energy. We find that two of the land-use change scenarios considered demonstrate a warming effect due to changes in surface albedo, compared to conventional fuel, the largest of which is for replacement of desert land with salicornia cultivation. This corresponds to 222 gCO2e/MJ, equivalent to 3890% and 247% of the lifecycle GHG emissions of fuels derived from salicornia and crude oil, respectively. Nine of the land-use change scenarios considered demonstrate a cooling effect, the largest of which is for the replacement of tropical rainforests with soybean cultivation. This corresponds to - 161 gCO2e/MJ, or - 28% and - 178% of the lifecycle greenhouse gas emissions of fuels derived from soybean and crude oil, respectively. These results indicate that changes in surface albedo have the potential to dominate the climate impact of biofuels, and we conclude that accounting for changes in surface albedo is necessary for a complete assessment of the aggregate climate impacts of biofuel production and use.

Determination of internal exposure doses of the personnel of uranium-mining company due to radon isotopes decay products

International Nuclear Information System (INIS)

Sevostyanov, V.N.

2004-01-01

This work carries out a determination of individual doses of internal exposure of the staff of the uranium-mining company in Kazakhstan due to radon decay products. The company extracts uranium by in-situ leaching. After leaching, uranium is sorbed from a solution in facilities where the staff is located. The state of three uranium mines was analyzed. The dose determination was conducted in tune with the proposed method by using integral alpha-tracking detectors to identify the content of 222 Rn and express appliances to identify the content of radio-active aerosols in air of the working area for determination the equilibrium coefficient. The measurements were performed within one year. The work produced the results in average annual values of radon and thoron decay products activity concentration and variation, equilibrium coefficient variation, and so-called expressive-to-integral value conversion factor. The obtained personnel's individual radiation doses due to radon exposure for this period lie within the range of < 1 mSv/year. (author)

Productivity loss due to premature mortality caused by blood cancer: a study based on patients undergoing stem cell transplantation.

Science.gov (United States)

Ortega-Ortega, Marta; Oliva-Moreno, Juan; Jiménez-Aguilera, Juan de Dios; Romero-Aguilar, Antonio; Espigado-Tocino, Ildefonso

2015-01-01

Stem cell transplantation has been used for many years to treat haematological malignancies that could not be cured by other treatments. Despite this medical breakthrough, mortality rates remain high. Our purpose was to evaluate labour productivity losses associated with premature mortality due to blood cancer in recipients of stem cell transplantations. We collected primary data from the clinical histories of blood cancer patients who had undergone stem cell transplantation between 2006 and 2011 in two Spanish hospitals. We carried out a descriptive analysis and calculated the years of potential life lost and years of potential productive life lost. Labour productivity losses due to premature mortality were estimated using the Human Capital method. An alternative approach, the Friction Cost method, was used as part of the sensitivity analysis. Our findings suggest that, in a population of 179 transplanted and deceased patients, males and people who die between the ages of 30 and 49 years generate higher labour productivity losses. The estimated loss amounts to over €31.4 million using the Human Capital method (€480,152 using the Friction Cost method), which means an average of €185,855 per death. The highest labour productivity losses are produced by leukaemia. However, lymphoma generates the highest loss per death. Further efforts are needed to reduce premature mortality in blood cancer patients undergoing transplantations and reduce economic losses. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

9 CFR 124.33 - Standard of due diligence.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Standard of due diligence. 124.33 Section 124.33 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... Diligence Petitions § 124.33 Standard of due diligence. (a) In determining the due diligence of an applicant...

77 FR 14041 - Major Portion Prices and Due Date for Additional Royalty Payments on Indian Gas Production in...

Science.gov (United States)

2012-03-08

... index zone pricing. We approved the Ute Indian Tribe's request; therefore, you must value production... due date for industry to pay additional royalties based on the major portion prices. This notice... additional royalties based on the major portion prices is May 7, 2012. FOR FURTHER INFORMATION CONTACT: John...

Flux and energy dependence of methane production from graphite due to H+ impact

International Nuclear Information System (INIS)

Davis, J.W.; Haasz, A.A.; Stangeby, P.C.

1986-06-01

Carbon is in widespread use for limiter surfaces, as well as first wall coatings in current tokamaks. Chemical erosion via methane formation, due to energetic H + impact, is expected to contribute to the total erosion rate of carbon from these surfaces. Experimental results are presented for the methane yield from pyrolytic graphite due to H + exposure, using a mass analyzed ion beam. H + energies of 0.1-3 keV and flux densities of ∼ 5x10 13 to l0 16 H + /cm 2 s were used. The measured methane yield (CH 4 /H + ) initially increases with flux density, then reaches a maximum, which is followed by a gradual decrease. The magnitude of the maximum yield and the flux density at which it occurs depends on the graphite temperature. The yields obtained at temperatures corresponding to yield maxima at specific flux densities also show an initial increase, followed by a shallow maximum and a gradual decrease as a function of flux density; the maximum occurs at ∼10 15 H + /cm 2 s. Also presented are results on the methane production dependence on ion energy over the range 0.1 to 3 keV, and graphite temperature dependence measurements

Quantifying the climate impacts of albedo changes due to biofuel production: a comparison with biogeochemical effects

International Nuclear Information System (INIS)

Caiazzo, Fabio; Malina, Robert; Staples, Mark D; Wolfe, Philip J; Yim, Steve H L; Barrett, Steven R H

2014-01-01

Lifecycle analysis is a tool widely used to evaluate the climate impact of greenhouse gas emissions attributable to the production and use of biofuels. In this paper we employ an augmented lifecycle framework that includes climate impacts from changes in surface albedo due to land use change. We consider eleven land-use change scenarios for the cultivation of biomass for middle distillate fuel production, and compare our results to previous estimates of lifecycle greenhouse gas emissions for the same set of land-use change scenarios in terms of CO 2 e per unit of fuel energy. We find that two of the land-use change scenarios considered demonstrate a warming effect due to changes in surface albedo, compared to conventional fuel, the largest of which is for replacement of desert land with salicornia cultivation. This corresponds to 222 gCO 2 e/MJ, equivalent to 3890% and 247% of the lifecycle GHG emissions of fuels derived from salicornia and crude oil, respectively. Nine of the land-use change scenarios considered demonstrate a cooling effect, the largest of which is for the replacement of tropical rainforests with soybean cultivation. This corresponds to − 161 gCO 2 e/MJ, or − 28% and − 178% of the lifecycle greenhouse gas emissions of fuels derived from soybean and crude oil, respectively. These results indicate that changes in surface albedo have the potential to dominate the climate impact of biofuels, and we conclude that accounting for changes in surface albedo is necessary for a complete assessment of the aggregate climate impacts of biofuel production and use. (paper)

Survey of the productivity loss due to heat stress in different tasks of farmers in Darreh Shahr city

Directory of Open Access Journals (Sweden)

M. R. Monazzam Esmaielpour

2015-09-01

Full Text Available Introduction: Heat is one of the hazardous physical agents in the workplace. Exposure to heat and consequent thermal stress influence workers productivity in addition to adverse health effects. The aim of this study was to determine the heat stress induced productivity loss related to different tasks of farmers in Darreh Shahr city, during summer. . Material and Method: This cross-sectional study was conducted in summer, 2014, among farmers in Darreh Shahr city. After determining the sample size, farmers’ activities were determined using hierarchical task analysis (HTA, and WBGT measurements were done according to the ISO7243. Metabolism was estimated by the ISO8996. Following, the type of activities were identified according their required metabolism. Knowing WBGT and workload and using the work capacity model, the productivity loss in different tasks and ultimately total productivity loss were calculated. .Result: The mean WBGT activities for plowing, terracing, planting seeds, watering, fertilizing, weeding, spraying, and harvesting were 29.98 °C, 31.28 °C,30.66 °C,31.39 °C,31.99 °C,31.75 °C,31.08 °C, and 30.3 °C, respectively. WBGT values were higher than the permissible level provided by ISO7243 in all farming activities. Maximum value of WBGT was belonged to fertilizing activity (31.99 °C and the lowest value was for plowing (29.98 °C. ANOVA test results did not show a significant difference in WBGT at head, waist, and ankle height. The highest and lowest amount of productivity loss was estimated respectively for weeding and plowing activities. The total productivity loss for farming was calculated 69.3 percent in an hour which is due to high physical activity, working outdoor, with exposure to direct solar radiation, and consequent heat stress imposed to workers. .Conclusion: Productivity is a factor which is affected by the workplace heat stress. According to results of the present research, the amount of productivity is

Influence of radioactive contamination to agricultural products due to dry and wet deposition processes during a nuclear emergency

International Nuclear Information System (INIS)

Hwang, Won Tae; Kim, Eun Han; Suh, Kyung Suk; Han, Moon Hee; Choi, Yong Ho; Lee, Chang Woo

2002-01-01

Combined with deposition model onto the ground of radionuclides, the influence of radioactive contamination to agricultural products was analyzed due to wet deposition as well as dry deposition from radioactive air concentration during a nuclear emergency. The previous dynamic food chain model, in which initial input parameter is only radionuclide concentrations on the ground, was improved for the evaluating of radioactive contamination to agricultural products from either radionuclide concentrations in air or radionuclide concentrations on the ground. As the results, in case of deposition onto the ground, wet deposition was more dominant process than dry deposition. While the contamination levels of agricultural products were dependent on the a variety of factors such as radionuclides and rainfall rate. It means that the contamination levels of agricultural products are determined from which is more dominant process between deposition on the ground and interception onto agricultural plants

Neutral $Z$ boson pair production due to radion resonance in the Randall-Sundrum model: prospects at the CERN LHC

CERN Document Server

Das-Prasanta, Kumar

2005-01-01

The Neutral $Z$ boson pair production due to radion resonance at the Large Hadron Collider is an interesting process to explore the notion of warped geometry (Randall-Sundrum model). Because of the enhanced coupling of radion with a pair of gluons due to trace enomaly and top(quark)-loop, the radion can provide larger event rate possibility as compared to any New Physics effect. Using the proper radion-top-antitop (with the quarks being off-shell) coupling, we obtain the correct radion production rate at LHC and explore several features of a heavier radion decaying into a pair of real Z bosons which subsequently decays into charged 4 l (l=e, \\mu) leptons (the gold-plated mode). Using the signal and background event rate, we obtain bounds on radion mass $m_\\phi$ and radion vev $\\vphi$ at the $5\\sigma$, $10\\sigma$ discovery level.

Differences in response to heat stress due to production level and breed of dairy cows

Science.gov (United States)

Gantner, Vesna; Bobic, Tina; Gantner, Ranko; Gregic, Maja; Kuterovac, Kresimir; Novakovic, Jurica; Potocnik, Klemen

2017-09-01

The climatic conditions in Croatia are deteriorating which significantly increases the frequency of heat stress. This creates a need for an adequate dairy farming strategy. The impact of heat stress can be reduced in many ways, but the best long-term solution includes the genetic evaluation and selection for heat stress resistance. In order to create the basis for genetic evaluation, this research determined the variation in daily milk yield (DMY) and somatic cell count (SCC) as well as the differences in resistance to heat stress due to production level (high, low) and breed (Holstein, Simmental) of dairy cattle breed in Croatia. For statistical analysis, 1,070,554 test-day records from 70,135 Holsteins reared on 5679 farms and 1,300,683 test-day records from 86,013 Simmentals reared on 8827 farms in Croatia provided by the Croatian Agricultural Agency were used. The results of this research indicate that the high-producing cows are much more susceptible to heat stress than low-producing especially Holsteins. Also, the results of this research indicate that Simmental breed, in terms of daily milk production and somatic cell count, could be more resistant to heat stress than Holstein. The following research should determine whether Simmentals are genetically more appropriate for the challenges that are in store for the future milk production in this region. Furthermore, could an adequate production level be achieved with Simmentals by maintaining the heat resistance?

The cost of lost productivity due to premature cancer-related mortality: an economic measure of the cancer burden.

Science.gov (United States)

Hanly, Paul A; Sharp, Linda

2014-03-26

Most measures of the cancer burden take a public health perspective. Cancer also has a significant economic impact on society. To assess this economic burden, we estimated years of potential productive life lost (YPPLL) and costs of lost productivity due to premature cancer-related mortality in Ireland. All cancers combined and the 10 sites accounting for most deaths in men and in women were considered. To compute YPPLL, deaths in 5-year age-bands between 15 and 64 years were multiplied by average working-life expectancy. Valuation of costs, using the human capital approach, involved multiplying YPPLL by age-and-gender specific gross wages, and adjusting for unemployment and workforce participation. Sensitivity analyses were conducted around retirement age and wage growth, labour force participation, employment and discount rates, and to explore the impact of including household production and caring costs. Costs were expressed in €2009. Total YPPLL was lower in men than women (men = 10,873; women = 12,119). Premature cancer-related mortality costs were higher in men (men: total cost = €332 million, cost/death = €290,172, cost/YPPLL = €30,558; women: total cost = €177 million, cost/death = €159,959, cost/YPPLL = €14,628). Lung cancer had the highest premature mortality cost (€84.0 million; 16.5% of total costs), followed by cancers of the colorectum (€49.6 million; 9.7%), breast (€49.4 million; 9.7%) and brain & CNS (€42.4 million: 8.3%). The total economic cost of premature cancer-related mortality in Ireland amounted to €509.5 million or 0.3% of gross domestic product. An increase of one year in the retirement age increased the total all-cancer premature mortality cost by 9.9% for men and 5.9% for women. The inclusion of household production and caring costs increased the total cost to €945.7 million. Lost productivity costs due to cancer-related premature mortality are significant. The higher premature mortality cost in males than

Variations of net ecosystem production due to seasonal precipitation differences in a tropical dry forest of northwest Mexico

Science.gov (United States)

Verduzco, Vivian S.; Garatuza-Payán, Jaime; Yépez, Enrico A.; Watts, Christopher J.; Rodríguez, Julio C.; Robles-Morua, Agustin; Vivoni, Enrique R.

2015-10-01

Due to their large extent and high primary productivity, tropical dry forests (TDF) are important contributors to atmospheric carbon exchanges in subtropical and tropical regions. In northwest Mexico, a bimodal precipitation regime that includes winter precipitation derived from Pacific storms and summer precipitation from the North American monsoon (NAM) couples water availability with ecosystem processes. We investigated the net ecosystem production of a TDF ecosystem using a 4.5 year record of water and carbon fluxes obtained from the eddy covariance method complemented with remotely sensed data. We identified a large CO2 efflux at the start of the summer season that is strongly related to the preceding winter precipitation and greenness. Since this CO2 efflux occurs prior to vegetation green-up, we infer that respiration is mainly due to decomposition of soil organic matter accumulated from the prior growing season. Overall, ecosystem respiration has an important effect on the net ecosystem production but can be overwhelmed by the strength of the primary productivity during the NAM. Precipitation characteristics during NAM have significant controls on sustaining carbon fixation in the TDF into the fall season. We identified that a threshold of ~350 to 400 mm of monsoon precipitation leads to a switch in the annual carbon balance in the TDF ecosystem from a net source (+102 g C/m2/yr) to a net sink (-249 g C/m2/yr). This monsoonal precipitation threshold is typically exceeded one out of every 2 years. The close coupling of winter and summer periods with respect to carbon fluxes suggests that the annual carbon balance is dependent on precipitation amounts in both seasons in TDF ecosystems.

Measuring the societal burden of cancer: the cost of lost productivity due to premature cancer-related mortality in Europe.

Science.gov (United States)

Hanly, Paul; Soerjomataram, Isabelle; Sharp, Linda

2015-02-15

Every cancer-related death in someone of working age represents an economic loss to society. To inform priorities for cancer control, we estimated costs of lost productivity due to premature cancer-related mortality across Europe, for all cancers and by site, gender, region and country. Cancer deaths in 2008 were obtained from GLOBOCAN for 30 European countries across four regions. Costs were valued using the human capital approach. Years of productive life lost (YPLL) were computed by multiplying deaths between 15 and 64 years by working-life expectancy, then by country-, age- and gender-specific annual wages, corrected for workforce participation and unemployment. Lost productivity costs due to premature cancer-related mortality in Europe in 2008 were €75 billion. Male costs (€49 billion) were almost twice female costs (€26 billion). The most costly sites were lung (€17 billion; 23% of total costs), breast (€7 billion; 9%) and colorectum (€6 billion; 8%). Stomach cancer (in Southern and Central-Eastern Europe) and pancreatic cancer (in Northern and Western Europe) were also among the most costly sites. The average lost productivity cost per cancer death was €219,241. Melanoma had the highest cost per death (€312,798), followed by Hodgkin disease (€306,628) and brain and CNS cancer (€288,850). Premature mortality costs were 0.58% of 2008 European gross domestic product, highest in Central-Eastern Europe (0.81%) and lowest in Northern Europe (0.51%). Premature cancer-related mortality costs in Europe are significant. These results provide a novel perspective on the societal cancer burden and may be used to inform priority setting for cancer control. © 2014 UICC.

Subsidence due to gas production in the Wadden Sea: How to ensure no harm will be done to nature

NARCIS (Netherlands)

Thienen-Visser, K. van; Breunese, J.N.; Muntendam-Bos, A.G.

2015-01-01

The Wadden Sea is a shallow tidal sea in the north of the Netherlands where gas production is ongoing since 1986. Due to the sensitive nature of this area, gas extraction induced subsidence must remain within the "effective subsidence capacity" for the two tidal basins (Pinkegat and Zoutkamperlaag)

Influence of predictive contamination to agricultural products due to dry and wet processes during an accidental release of radionuclides

International Nuclear Information System (INIS)

Hwang, Won Tae; Kim, Eun Han; Suh, Kyung Suk; Jeong, Hyo Joon; Han, Moon Hee; Lee, Chang Woo

2003-01-01

The influence of predictive contamination to agricultural products due to the wet processes as well as dry processes from radioactive air concentration during a nuclear emergency is comprehensively analyzed. The previous dynamic food chain model DYNACON considering Korean agricultural and environmental conditions, in which the initial input parameter was radionuclide concentrations on the ground, is improved so as to evaluate radioactive contamination to agricultural products from either radioactive air concentrations or radionuclide concentrations on the ground. As for the results, wet deposition is a more dominant mechanism than dry deposition in contamination on the ground. While, the contamination levels of agricultural products are strongly dependent on radionuclide and precipitation when the deposition of radionuclides occurs. It means that the contamination levels of agricultural products are determined from which is the more dominant process between deposition on the ground and interception to agricultural plants

Genetic and Biological Changes of Newcastle Disease Virus Due to The Development of Chicken Production System

Directory of Open Access Journals (Sweden)

Sudarisman

2009-09-01

Full Text Available In many countries, Newcastle Disease (ND is one of the most important diseases of poultry. It causes serious economic losses in poultry industry. Newcastle Disease or pseudo-fowl pest is a highly infectious viral disease that causes very high mortality (up to 100% in severe epidemics in poultry and wild birds around the world. Newcastle Disease remains endemic in many regions and continues to severely limit poultry production in some developing countries. The disease is currently being controlled by routine vaccinations in many countries. However, it was reported that outbreaks of ND in vaccinated flocks often occur on the field may not only be due to differences in the antigenicity of the NDV wild field strains and vaccine strains, but could also be as a result of differences in pathogenicity and virulence between different strains used as vaccine seed in NDV vaccine production.

XML Survey of the productivity loss due to heat stress in different tasks of farmers in Darreh Shahr city

Directory of Open Access Journals (Sweden)

M. R. Monazzam Esmaielpou

2015-09-01

Full Text Available Introduction: Heat is one of the hazardous physical agents in the workplace. Exposure to heat and consequent thermal stress influence workers productivity in addition to adverse health effects. The aim of this study was to determine the heat stress induced productivity loss related to different tasks of farmers in Darreh Shahr city, during summer. Material and Method: This cross-sectional study was conducted in summer, 2014, among farmers in Darreh Shahr city. After determining the sample size, farmers’ activities were determined using hierarchical task analysis (HTA, and WBGT measurements were done according to the ISO7243. Metabolism was estimated by the ISO8996. Following, the type of activities were identified according their required metabolism. Knowing WBGT and workload and using the work capacity model, the productivity loss in different tasks and ultimately total productivity loss were calculated. Result: The mean WBGT activities for plowing, terracing, planting seeds, watering, fertilizing, weeding, spraying, and harvesting were 29.98 °C, 31.28 °C,30.66 °C,31.39 °C,31.99 °C,31.75 °C,31.08 °C, and 30.3 °C, respectively. WBGT values were higher than the permissible level provided by ISO7243 in all farming activities. Maximum value of WBGT was belonged to fertilizing activity (31.99 °C and the lowest value was for plowing (29.98 °C. ANOVA test results did not show a significant difference in WBGT at head, waist, and ankle height. The highest and lowest amount of productivity loss was estimated respectively for weeding and plowing activities. The total productivity loss for farming was calculated 69.3 percent in an hour which is due to high physical activity, working outdoor, with exposure to direct solar radiation, and consequent heat stress imposed to workers. Conclusion: Productivity is a factor which is affected by the workplace heat stress. According to results of the present research, the amount of productivity is reduced

Productivity losses due to premature mortality from cancer in Brazil, Russia, India, China, and South Africa (BRICS): A population-based comparison.

Science.gov (United States)

Pearce, Alison; Sharp, Linda; Hanly, Paul; Barchuk, Anton; Bray, Freddie; de Camargo Cancela, Marianna; Gupta, Prakash; Meheus, Filip; Qiao, You-Lin; Sitas, Freddy; Wang, Shao-Ming; Soerjomataram, Isabelle

2018-04-01

Over two-thirds of the world's cancer deaths occur in economically developing countries; however, the societal costs of cancer have rarely been assessed in these settings. Our aim was to estimate the value of productivity lost in 2012 due to cancer-related premature mortality in the major developing economies of Brazil, the Russian Federation, India, China and South Africa (BRICS). We applied an incidence-based method using the human capital approach. We used annual adult cancer deaths from GLOBOCAN2012 to estimate the years of productive life lost between cancer death and pensionable age in each country, valued using national and international data for wages, and workforce statistics. Sensitivity analyses examined various methodological assumptions. The total cost of lost productivity due to premature cancer mortality in the BRICS countries in 2012 was $46·3 billion, representing 0·33% of their combined gross domestic product. The largest total productivity loss was in China ($28 billion), while South Africa had the highest cost per cancer death ($101,000). Total productivity losses were greatest for lung cancer in Brazil, the Russian Federation and South Africa; liver cancer in China; and lip and oral cavity cancers in India. Locally-tailored strategies are required to reduce the economic burden of cancer in developing economies. Focussing on tobacco control, vaccination programs and cancer screening, combined with access to adequate treatment, could yield significant gains for both public health and economic performance of the BRICS countries. Copyright © 2017 Elsevier Ltd. All rights reserved.

Epidemiology of camel trypanosomosis due to Trypanosoma evansi in Mauritania and its control strategies for sustainable livestock production

Energy Technology Data Exchange (ETDEWEB)

Dia Mamadou Lamine [CNERV, Nouakchott (Mauritania)], E-mail: mldsb@hotmail.com

2009-07-01

Camel trypanosomiasis due to Trypanosoma evansi is mechanically transmitted by hematophagious diptera such as Tabanidae, Stomoxyinae, and Hippoboscidae. In its acute form, the disease results in a generalized weakness. The animal lies down as of the least effort; milk production falls with the abortion of females. At times, the animal dies after a prolonged decubitus. However, in 80% cases, the disease is observed in its chronic form, which is characterized by considerable economic losses resulting from abortions, reduction of milk production, loss weight, and cachexia. Due to its extremely dry conditions Mauritania remains a favourable environment for camels as preferred livestock species of considerable economic importance. The animals are kept by shepherds who are very mobile in the field in search of good pastures and water points. Unfortunately, this pastoral system is reported to expose dromedaries to numerous pathologic conditions, especially camel trypanosomiasis due to T. evansi. Our investigations from 1993 to 1997 showed that T. evansi is present in the dromedaries in Mauritania. According the haematocrit centrifuge technique the parasite prevalence rate ranged from 1.1 to 13.6 % while seroprevalence varied from 13% to 36.7% according to the CATT test. In the Trarza region, as consequence of a good rainy season we more recently observed an abundance of tabanids and stomoxes hence a favourable ecology of T. evansi vectors, and subsequently an outbreak of camel trypanosomosis. Prevalence rate was 17.6% using buffy coat examination and 58.8% with the CATT. In many herds, numerous abortions were recorded and all breeders registered very important milk production losses. In order to limit the infections due to T. evansi, two control strategies for camel husbandry could be practiced in the Trarza region. The first is 'northern strategy' with the potential of lowering pastures availability and usage. However, it has the advantage of avoiding the direct and

Assessing the transfer of risk due to transportation of agricultural products.

Science.gov (United States)

Li, Pei-Chiun; Shih, Hsiu-Ching; Ma, Hwong-Wen

2015-02-01

Health risk assessment (HRA) is the process used to estimate adverse health effects on humans. The importance and sensitivity of food chains to HRA have been observed, but the impact of the transportation of food has generally been ignored. This study developed an exposure assessment to demonstrate the significance of the transportation of agricultural products in HRA. The associated case study estimated the health risks derived from various sources of arsenic emissions in Taiwan. Two assessment scenarios, self-sufficiency and transportation of agricultural products, were compared to calculate risk transfer ratios that show the impact of agriculture transportation. The risk transfer ratios found by the study range from 0.22 to 42.10, indicating that the quantity of transportation of agricultural products is the critical factor. High air deposition and high agricultural production are the two main contributors to the effect of the transportation of agricultural products on HRA. Risk reduction measures could be applied to high-pollution areas as well as to areas with high agricultural productivity to reduce ingestion risks to residents. Certain areas that are sensitive to the transportation of agricultural products may incur more risks if emissions increase in agriculturally productive counties. Copyright © 2014 Elsevier Ltd. All rights reserved.

Radiation hazards due to activated corrosion and neutron sputtering products in fusion reactor coolant and tritium breeding fluids

International Nuclear Information System (INIS)

Klein, A.C.; Vogelsang, W.F.

1985-01-01

The accumulation of radioactive corrosion and neutron sputtering products on the surfaces of components in fusion reactor coolant and tritium breeding systems can cause significant personnel access problems. Remote maintenance techniques or special treatment may be required to limit the amount of radiation exposure to plant operational and maintenance personnel. A computer code, RAPTOR, has been developed to estimate the transport of this activated material throughout a fusion heat transfer and/or tritium breeding material loop. A method is devised which treats the components of the loop individually and determines the source rates, deposition and erosion rates, decay rates, and purification rates of these radioactive materials. RAPTOR has been applied to the MARS and Starfire conceptual reactor designs to determine the degree of the possible radiation hazard due to these products. Due to the very high corrosion release rate by HT-9 when exposed to LiPb in the MARS reactor design, the radiation fields surrounding the primary system will preclude direct contact maintenance even after shutdown. Even the removal of the radioactive LiPb from the system will not decrease the radiation fields to reasonable levels. The Starfire primary system will exhibit radiation fields similar to those found in present pressurized water reactors. (orig.)

Stress triggering of earthquakes and subsidence in the Louisiana coastal zone due to hydrocarbon production

Science.gov (United States)

Mallman, Ellen P.

This thesis presents contributions towards better understanding of the interaction between earthquakes through elastic stress triggering and the role of hydrocarbon production on subsidence and land loss in southern Louisiana. The first issue addressed in this thesis is that of the role of static stress changes on earthquake triggering. The first study investigated whether observed changes in seismicity rate following the 1992 Landers, California and 1995 Kobe, Japan earthquakes are accurately predicted by elastic Coulomb stress transfer models. The analyses found that for all the tested DeltaCFS models wherever seismicity rate changes could be resolved the rate increased regardless of whether the DeltaCFS theoretically promoted or inhibited failure. The second study the common definition of a stress shadow was extended to independently test the stress shadow hypothesis using a global catalog of seismicity. The analyses indicated that while stress shadows are subtle, they are present in the global catalog. It also explains why "classical" stress shadows, similar to what was observed following the 1906 San Francisco earthquake are rarely observed for individual main shocks. The second issue addressed in this thesis is the role of hydrocarbon production on subsidence and land loss in the Louisiana Coastal Zone. The two studies in this thesis extend previous work by modeling the effect of oil and gas production in the region in two ways. First, multiple producing oil and gas fields and multiple epochs of leveling data are considered to provide constraints on predicted subsidence. Second, the role of compaction of the reservoir bounding shales on the regional subsidence signal is included. The results of the two studies on the role of hydrocarbon production on subsidence in the Louisiana Coastal Zone indicate that regional models of subsidence must include the effects of production-induced subsidence due to both sands and shales, but that this can not account for the

Investigating the loss of work productivity due to symptomatic leiomyoma.

Science.gov (United States)

Hasselrot, Klara; Lindeberg, Mia; Konings, Peter; Kopp Kallner, Helena

2018-01-01

Leiomyoma affects up to 50% of fertile women, leading to morbidity such as bleeding or pain. The effect of symptomatic leiomyoma on the productivity of employed women is understudied. The present study investigates productivity loss in a Swedish setting in women with symptomatic leiomyoma compared to healthy women. Women seeking care for leiomyoma and heavy menstrual bleeding (HMB) were recruited at nine Swedish sites. Healthy controls with self-perceived mild to normal menstruation were recruited at routine visits. Cases and controls were employed without option to work from home. After recruitment, all women reported the work productivity and activity impairment (WPAI) questionnaire, the pictorial blood assessment chart (PBAC) and pain on the visual analog scale (VAS). Women with symptomatic leiomyoma (n = 88) missed more working time during menses compared to asymptomatic controls (n = 34): 7.6 vs 0.2% p = 0.003. The proportion of impairment while working was also significantly higher in women with symptomatic leiomyoma (43.8 vs 12.1% p100). Symptomatic leiomyoma leads to loss of working hours as well as loss of productivity during working hours, and affects women in other daily activities. Increased awareness of the impact of leiomyomas on women's lives is needed, and timely and appropriate management of the symptomatic leiomyomas could improve work productivity and quality of life.

Evaluation of the productivity decrease risk due to a future increase in tropical cyclone intensity in Japan.

Science.gov (United States)

Esteban, Miguel; Longarte-Galnares, Gorka

2010-12-01

A number of scientists have recently conducted research that shows that tropical cyclone intensity is likely to increase in the future. This would result in an increase in the damage along with a decrease in economic productivity due to precautionary cessation of the economic activity of the affected areas during the passage of the cyclone. The economic effect of this stop in economic activity is a phenomenon that has not received much attention in the past, and the cumulative effect that it can have on the Japanese economy over the next 75 years has never been evaluated. The starting point for the evaluation of the economic risks is the change in the patterns of tropical cyclone intensity suggested by Knutson and Tuleya. The results obtained show how a significant decrease in the overall productivity of the country could be expected, which could lower GDP by between 6% and 13% by 2085. © 2010 Society for Risk Analysis.

Hydroelectric production from Brazil's São Francisco River could cease due to climate change and inter-annual variability.

Science.gov (United States)

de Jong, Pieter; Tanajura, Clemente Augusto Souza; Sánchez, Antonio Santos; Dargaville, Roger; Kiperstok, Asher; Torres, Ednildo Andrade

2018-09-01

By the end of this century higher temperatures and significantly reduced rainfall are projected for the Brazilian North and Northeast (NE) regions due to Global Warming. This study examines the impact of these long-term rainfall changes on the Brazilian Northeast's hydroelectric production. Various studies that use different IPCC models are examined in order to determine the average rainfall reduction by the year 2100 in comparison to baseline data from the end of the 20th century. It was found that average annual rainfall in the NE region could decrease by approximately 25-50% depending on the emissions scenario. Analysis of historical rainfall data in the São Francisco basin during the last 57years already shows a decline of more than 25% from the 1961-90 long-term average. Moreover, average annual rainfall in the basin has been below its long-term average every year bar one since 1992. If this declining trend continues, rainfall reduction in the basin could be even more severe than the most pessimistic model projections. That is, the marked drop in average rainfall projected for 2100, based on the IPCC high emissions scenario, could actually eventuate before 2050. Due to the elasticity factor between rainfall and streamflow and because of increased amounts of irrigation in the São Francisco basin, the reduction in the NE's average hydroelectric production in the coming decades could be double the predicted decline in rainfall. Conversely, it is estimated that wind power potential in the Brazilian NE will increase substantially by 2100. Therefore both wind and solar power will need to be significantly exploited in order for the NE region to sustainably replace lost hydroelectric production. Copyright © 2018 Elsevier B.V. All rights reserved.

Quantitative measurement of productivity loss due to thermal discomfort

DEFF Research Database (Denmark)

Lan, Li; Wargocki, Pawel; Lian, Zhiwei

2011-01-01

discomfort caused by elevated air temperature had a negative effect on performance. A quantitative relationship was established between thermal sensation votes and task performance. It can be used for economic calculations pertaining to building design and operation when occupant productivity is considered...

Autosomal dominant familial erythrocytosis due to autonomous erythropoietin production

International Nuclear Information System (INIS)

Distelhorst, C.W.; Wagner, D.S.; Goldwasser, E.; Adamson, J.W.

1981-01-01

A family is described in which four members spanning three consecutive generations have erythrocytosis associated with a normal hemoglobin oxygen affinity. When bone marrow from one affected family member was cultured in vitro, erythroid colonies formed only when erythropoietin was added to the culture. Serum erythropoietin, measured by radioimmunoassay, was significantly elevated above normal in each of the affected family members. Bioassayable erythropoietin was detected in the urine of two of the three affected family members. In two of the affected family members, erythropoietin was measured in serum by radioimmunoassay and in urine by bioassay before and for 4 days following an isovolemic phlebotomy, which reduced the red cell mass by 20%. Neither serum nor urinary erythropoietin levels changed following phlebotomy. The erythrocytosis in this family appears to be secondary to inappropriately increased erythropoietin production unassociated with a decrease in the blood oxygen-carrying capacity. This is the first instance in which autonomous erythropoietin production appears to be inherited on an autosomal dominant basis

Ozone Production in Global Tropospheric Models: Quantifying Errors due to Grid Resolution

Science.gov (United States)

Wild, O.; Prather, M. J.

2005-12-01

Ozone production in global chemical models is dependent on model resolution because ozone chemistry is inherently nonlinear, the timescales for chemical production are short, and precursors are artificially distributed over the spatial scale of the model grid. In this study we examine the sensitivity of ozone, its precursors, and its production to resolution by running a global chemical transport model at four different resolutions between T21 (5.6° × 5.6°) and T106 (1.1° × 1.1°) and by quantifying the errors in regional and global budgets. The sensitivity to vertical mixing through the parameterization of boundary layer turbulence is also examined. We find less ozone production in the boundary layer at higher resolution, consistent with slower chemical production in polluted emission regions and greater export of precursors. Agreement with ozonesonde and aircraft measurements made during the NASA TRACE-P campaign over the Western Pacific in spring 2001 is consistently better at higher resolution. We demonstrate that the numerical errors in transport processes at a given resolution converge geometrically for a tracer at successively higher resolutions. The convergence in ozone production on progressing from T21 to T42, T63 and T106 resolution is likewise monotonic but still indicates large errors at 120~km scales, suggesting that T106 resolution is still too coarse to resolve regional ozone production. Diagnosing the ozone production and precursor transport that follow a short pulse of emissions over East Asia in springtime allows us to quantify the impacts of resolution on both regional and global ozone. Production close to continental emission regions is overestimated by 27% at T21 resolution, by 13% at T42 resolution, and by 5% at T106 resolution, but subsequent ozone production in the free troposphere is less significantly affected.

Temperature dependent fission product removal efficiency due to pool scrubbing

Energy Technology Data Exchange (ETDEWEB)

Uchida, Shunsuke, E-mail: suchida@iae.or.jp [Institute of Applied Energy, 1-14-2, Nishi-Shimbashi, Minato-ku, Tokyo 105-0003 (Japan); Itoh, Ayumi; Naitoh, Masanori; Okada, Hidetoshi; Suzuki, Hiroyuki [Institute of Applied Energy, 1-14-2, Nishi-Shimbashi, Minato-ku, Tokyo 105-0003 (Japan); Hanamoto, Yukio [KAKEN, Inc., 1044, Hori-machi, Mito 310-0903 (Japan); Osakabe, Masahiro [Tokyo University of Marine Science & Technology, Koutou-ku, Tokyo 135-8533 (Japan); Fujikawa, Masahiro [Japan Broadcasting Corporation, 2-2-1, Jinnan, Shibuya-ku, Tokyo 150-8001 (Japan)

2016-03-15

Highlights: • Pool temperature effects on the FP removal were not clearly concluded in the previous publications. • It was confirmed that the removal efficiency decreased with temperature around the boiling point. • A modified empirical formula for FP removal was proposed as a function of sub-cooling temperature. • DF could be predicted with an accuracy within a factor of 2 with the proposed formula. - Abstract: The wet-well of boiling water reactors plays important roles not only to suppress the pressure in the primary containment vessel due to steam scrubbing effects during severe accidents but also to mitigate release of radioactive fission products (FP), aerosols and particulates, into the environment. The effects of steam scrubbing in the wet-well on FP removal have been well studied and reported by changing major parameters determining the removal efficiencies, e.g., aerosol diameters, submergence (depth of scrubbing nozzles) and steam/non-condensable gas volume fraction. Unfortunately, the effects of pool temperature on the FP removal were not clearly concluded in the previous publications, though it would be easily expected that boiling in the pool resulted in reduced aerosol removal efficiency. In order to determine the temperature effects on FP removal efficiency, amounts of cesium in aerosols released from scrubbing pool were measured by changing pool temperature in mini and medium scale scrubbing experiments, and then, it was confirmed that the removal efficiency clearly decreased with temperature around the boiling point. Then, a modified empirical formula to express the FP removal around the boiling point temperature was proposed as a function of sub-cooling temperature by applying the effective steam volume fraction, which was designated as the volume ratio of condensed steam in the pool versus the sum of input steam and non-condensable gas. By comparing the measured removal efficiency with the calculated, it was validated that the

Temperature dependent fission product removal efficiency due to pool scrubbing

International Nuclear Information System (INIS)

Uchida, Shunsuke; Itoh, Ayumi; Naitoh, Masanori; Okada, Hidetoshi; Suzuki, Hiroyuki; Hanamoto, Yukio; Osakabe, Masahiro; Fujikawa, Masahiro

2016-01-01

Highlights: • Pool temperature effects on the FP removal were not clearly concluded in the previous publications. • It was confirmed that the removal efficiency decreased with temperature around the boiling point. • A modified empirical formula for FP removal was proposed as a function of sub-cooling temperature. • DF could be predicted with an accuracy within a factor of 2 with the proposed formula. - Abstract: The wet-well of boiling water reactors plays important roles not only to suppress the pressure in the primary containment vessel due to steam scrubbing effects during severe accidents but also to mitigate release of radioactive fission products (FP), aerosols and particulates, into the environment. The effects of steam scrubbing in the wet-well on FP removal have been well studied and reported by changing major parameters determining the removal efficiencies, e.g., aerosol diameters, submergence (depth of scrubbing nozzles) and steam/non-condensable gas volume fraction. Unfortunately, the effects of pool temperature on the FP removal were not clearly concluded in the previous publications, though it would be easily expected that boiling in the pool resulted in reduced aerosol removal efficiency. In order to determine the temperature effects on FP removal efficiency, amounts of cesium in aerosols released from scrubbing pool were measured by changing pool temperature in mini and medium scale scrubbing experiments, and then, it was confirmed that the removal efficiency clearly decreased with temperature around the boiling point. Then, a modified empirical formula to express the FP removal around the boiling point temperature was proposed as a function of sub-cooling temperature by applying the effective steam volume fraction, which was designated as the volume ratio of condensed steam in the pool versus the sum of input steam and non-condensable gas. By comparing the measured removal efficiency with the calculated, it was validated that the

Power production operations management : due diligence and emergency planning. The due diligence - management system connection : an operating managers guide

International Nuclear Information System (INIS)

Kelly, J.

1998-01-01

Steps taken by BC Hydro in implementing a company-wide emergency management system (EMS) were described. The driving force behind the implementation of the EMS were related to the business, namely: (1) to improve business and environmental performance, (2) to provide employees with the skills and tools to make the right decisions, (3) to retain and attract customers, (4) to build relations with regulators, NGOs and the public, and (5) to prove due diligence. This presentation focused on the due diligence component of the EMS. 1 fig

Storage of spent fuels: implementation of a research program on the risk of waste container rupture due to stress corrosion induced by fission products

International Nuclear Information System (INIS)

Parise, M.; Walle, E.; Foct, J.

2001-01-01

The following topics were dealt with: research programm on stress corrosion of spent fuel casks materials due to fission products, such as iodine, chemical interactions with zirconium, chemical aspects of stress corrosion, rupture risk assessment

Industry in the 5th Environmental Outlook. Background information and final conclusions on the future development of environmental pressure (emissions) due to industrial production in the Netherlands

International Nuclear Information System (INIS)

Wesselink, L.G.; Elzenga, H.E.; Booij, H.; Peek, K.; Thomas, R.; Duvoort, G.L.; Van Schijndel, M.W.

2001-01-01

The present and future development of environmental pressure (here emissions) due to industrial production in the Netherlands are discussed. Results were - strongly aggregated - also presented in the 5th Environmental Outlook. We studied developments in production levels, energy use and emissions of Dutch industry and the effect of environmental policy measures, in the period 1980-2020. We used monitoring data for the period 1980-1998 en two scenarios (Global Competition and European Coordination) for the subsequent 1998-2020 period. It is concluded, that future CO2 emissions due to industrial production will continue to increase, that emissions of fluorinated (Kyoto) gasses will strongly decrease and that emissions of NOx, SO2, VOS en fine particles will continue to decrease. Yet, current environmental policy is insufficient to meet national Dutch emission targets of NOx, SO2, VOS in 2010

Suppression of bremsstrahlung and pair production due to environmental factors

International Nuclear Information System (INIS)

Klein, Spencer

1999-01-01

The environment in which bremsstrahlung and pair creation occurs can strongly affect cross sections for these processes. Because ultrarelativistic electromagnetic interactions involve very small longitudinal momentum transfers, the reactions occur gradually, spread over long distances. During this time, even relatively weak factors can accumulate enough to disrupt the interaction. In the Landau-Pomeranchuk-Migdal effect, multiple scattering reduces the bremsstrahlung and pair production cross section. This review will discuss this and a variety of other factors that can suppress bremsstrahlung and pair production, as well as related effects involving beamstrahlung and QCD processes. After surveying different theoretical approaches, experimental measurements will be covered. Recent accurate measurements by the SLAC E-146 Collaboration will be highlighted, along with several recent theoretical works relating to the experiment. (c) 1999 The American Physical Society

Radiocontamination of agricultural workers due to nuclear accidents

International Nuclear Information System (INIS)

Petrovic, B.; Smelcerovic, M.; Djuric, G.; Popovic, D.

1989-01-01

In the radiocontamination of the environment due to nuclear accidents, agricultural workers should be considered as a critical group of population. The presented paper discusses this problem from the aspects of folder production. The values of the effective dose equivalent are estimated for different phases of the production process and certain procedures aimed to reduce the radiation risk are proposed (author)

Radiocontamination of agricultural workers due to nuclear accidents

Energy Technology Data Exchange (ETDEWEB)

Petrovic, B [Faculty of Veterinary Medicine, Beograd, (Serbia and Montenegro); Smelcerovic, M; Djuric, G; Popovic, D [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1989-07-01

In the radiocontamination of the environment due to nuclear accidents, agricultural workers should be considered as a critical group of population. The presented paper discusses this problem from the aspects of folder production. The values of the effective dose equivalent are estimated for different phases of the production process and certain procedures aimed to reduce the radiation risk are proposed (author)

The effect of additional dead space on respiratory exchange ratio and carbon dioxide production due to training.

Science.gov (United States)

Smolka, Lukasz; Borkowski, Jacek; Zaton, Marek

2014-01-01

The purpose of the study was to investigate the effects of implementing additional respiratory dead space during cycloergometry-based aerobic training. The primary outcome measures were respiratory exchange ratio (RER) and carbon dioxide production (VCO2). Two groups of young healthy males: Experimental (Exp, n = 15) and Control (Con, n = 15), participated in this study. The training consisted of 12 sessions, performed twice a week for 6 weeks. A single training session consisted of continuous, constant-rate exercise on a cycle ergometer at 60% of VO2max which was maintained for 30 minutes. Subjects in Exp group were breathing through additional respiratory dead space (1200ml), while subjects in Con group were breathing without additional dead space. Pre-test and two post-training incremental exercise tests were performed for the detection of gas exchange variables. In all training sessions, pCO2 was higher and blood pH was lower in the Exp group (p exchange ratio and carbon dioxide production.In all training sessions, respiratory acidosis was gained by experimental group only.No significant difference in RER and VCO2 between experimental and control group due to the trainings.The lack of difference in post-training values of RER and VCO2 between groups means absence of inhibition in glycolysis and glycogenolysis during exercise with additional dead space.

Human due diligence.

Science.gov (United States)

Harding, David; Rouse, Ted

2007-04-01

Most companies do a thorough job of financial due diligence when they acquire other companies. But all too often, deal makers simply ignore or underestimate the significance of people issues in mergers and acquisitions. The consequences are severe. Most obviously, there's a high degree of talent loss after a deal's announcement. To make matters worse, differences in decision-making styles lead to infighting; integration stalls; and productivity declines. The good news is that human due diligence can help companies avoid these problems. Done early enough, it helps acquirers decide whether to embrace or kill a deal and determine the price they are willing to pay. It also lays the groundwork for smooth integration. When acquirers have done their homework, they can uncover capability gaps, points of friction, and differences in decision making. Even more important, they can make the critical "people" decisions-who stays, who goes, who runs the combined business, what to do with the rank and file-at the time the deal is announced or shortly thereafter. Making such decisions within the first 30 days is critical to the success of a deal. Hostile situations clearly make things more difficult, but companies can and must still do a certain amount of human due diligence to reduce the inevitable fallout from the acquisition process and smooth the integration. This article details the steps involved in conducting human due diligence. The approach is structured around answering five basic questions: Who is the cultural acquirer? What kind of organization do you want? Will the two cultures mesh? Who are the people you most want to retain? And how will rank-and-file employees react to the deal? Unless an acquiring company has answered these questions to its satisfaction, the acquisition it is making will be very likely to end badly.

Internal dosimetric evaluation due to uranium aerosols

International Nuclear Information System (INIS)

Garcia Aguilar Juan; Delgado Avila Gustavo

1991-01-01

The present work has like object to carry out the internal dosimetric evaluation to the occupationally exposed personnel, due to the inhalation of aerosols of natural uranium and enriched in the pilot plant of nuclear fuel production of the National Institute of Nuclear Research

Dynamical regimes due to technological change in a microeconomical model of production

Science.gov (United States)

Hamacher, K.

2012-09-01

We develop a microeconomical model to investigate the impact of technological change onto production decisions of suppliers—modeling an effective feedback mechanism of the market. An important property—the time horizon of production planning—is related to the Kolmogorov entropy of the one-dimensional maps describing price dynamics. We simulate this price dynamics in an ensemble representing the whole macroeconomy. We show how this model can be used to support ongoing research in economic growth and incorporate the obtained microeconomic findings into the discussion about appropriate macroeconomic quantities such as the production function—thus effectively underpinning macroeconomics with microeconomical dynamics. From there we can show that the model exhibits different dynamical regimes (suggesting "phase transitions") with respect to an order parameter. The non-linear feedback under technological change was found to be the crucial mechanism. The implications of the obtained regimes are finally discussed.

Chemical erosion of sintered boron carbide due to H+ impact

International Nuclear Information System (INIS)

Davis, J.W.; Haasz, A.A.

1990-06-01

The production of hydrocarbons and boron hydrides due to H + bombardment of sintered B 4 C has been investigated as a function of sample temperature and incident ion energy. While hydrocarbon production was observed, the yields were approximately two orders of magnitude smaller than observed for graphite. There was no evidence to indicate the production of any volatile boron-containing compounds. (3 figs., 11 refs.)

Impacts of decadal variations in natural emissions due to land-cover changes on ozone production in southern China

Directory of Open Access Journals (Sweden)

Mengmeng Li

2015-09-01

Full Text Available The decadal variations in emissions of high-reactivity biogenic volatile organics (BVOCs, as a result of land-cover changes, could significantly impact ozone (O3 production. In this study, the Weather Research and Forecasting/Chemistry (WRF/Chem modelling system, coupled with dynamic vegetation data sets derived from Moderate Resolution Imaging Spectroradiometer (MODIS, 2001–2012 and Advanced Very High Resolution Radiometer (AVHRR, early 1990s measurements, were used to investigate the impacts of land-cover changes on natural emissions, and consequently O3 production, in the Pearl River Delta (PRD region of southern China over the past two decades. Model results indicate that BVOC emissions were highly dependent on forest area. The total BVOC emissions in the modelling domain increased by a factor of two due to afforestation since the early 1990s, declined slowly (−5.8% yr−1 until 2006 and then increased continuously (+9.1% yr−1 to 2012. The decadal variations in BVOC emissions have complex implications for summer O3 production in PRD, depending on the chemical regimes and prevailing winds. The impacts on O3 production were most sensitive in downwind areas, and it was found that the large increase in BVOC emissions during 2006–2012 tended to reduce surface O3 concentrations by 1.6–2.5 ppb in rural regions, but caused an increment of O3 peaks by up to 2.0–6.0 ppb in VOC-limited urban areas (e.g., Guangzhou, Foshan and Zhongshan. The opposite was true in the period 2001–2006, when the reduced BVOC emissions resulted in 1.3–4.0 ppb increases in daytime O3 concentrations over northern rural regions. Impact of the two-fold increase in BVOC emissions since the early 1990s to 2006 was a 0.9–4.6 ppb increment in surface O3 concentrations over the downwind areas. This study suggests that the potential impacts on ozone chemistry should be considered in long-term land-use planning and air-quality management.

An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

OpenAIRE

Lavlesh Kumar Sharma; Ravindra Mohan Saxena

2014-01-01

In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

Phosphorus levels in soil and lettuce production due to phosphorus fertilization

Directory of Open Access Journals (Sweden)

José Ricardo Mantovani

2014-09-01

Full Text Available The leafy vegetables are considered nutrient-demanding, but are scarce in the literature works about phosphorus fertilization. This study aimed to evaluate the effect of phosphate on the production of lettuce, content and amount of P accumulated in leaf plants, and to relate levels of P in the clayey soil with plant production. The experiment was conducted in a greenhouse in pots in a randomized block design with ten treatments and four replications. The treatments were made up of P, corresponding to 0, 50, 100, 150, 200, 300, 400, 500, 600 and 700 mg dm-3, as triple superphosphate powder. Portions of 6 dm3 of the clay soil (420 g kg-1 clay received lime, aimed at raising the V % soil to 70 %, equivalent to 20 t ha-1 of cattle manure, and the phosphate fertilizer according to the treatments, remaining incubated for about 30 days. At the end of incubation, each pot received a change of lettuce cultivar Verônica. The plant harvesting was performed 39 days after transplanting the seedlings. O P gave large increases in growth and production of lettuce, and culture responded positively to the application of high doses of the nutrient. A dose of 350 mg dm-3, equivalent to 800 kg ha-1 P2O5, was the most suitable for growing lettuce in the clay soil. In this work conditions, the phosphorus fertilizations it was necessary when the P-Mehlich contents in the clay soil were less than 75 mg dm-3.

Uncharted territories of the patent-restoration due-diligence challenge.

Science.gov (United States)

Gaudry, Kate S

2011-01-01

The innovation and development incentives offered by the patent system are mitigated if a substantial portion of the patent term is lost while obtaining product approval through the Food and Drug Administration (FDA). The Drug Price Competition and Patent Restoration Act was enacted to return some of the lost patent term to the patentee. However, any person can petition the FDA, contending that the patentee did not act with due diligence in seeking FDA approval of the product during the regulatory review period. A successful challenge will reduce the restored term, such that the patentee is not compensated for time lost due to his own non-diligent actions. While the current due-diligence regulations provide a vague and flexible standard, earlier drafts of the regulations and FDA responses to comments provide insight as to the types of factors the FDA is likely to consider when assessing an applicant's diligence. A due-diligence petition has only been filed three times, and in none of these cases did the FDA issue a decision based on substantive diligence matters. Still, detailed examination of these petitions is also instructive in predicting the success of due-diligence challenges. Statute-imposed maximums and applicants' own incentives to act diligently may minimize the utility of the due-diligence challenges in some contexts. However, in other contexts, I propose that these petitions offer a feasible approach towards limiting pharmaceutical monopolies.

Neutrophil microparticle production and inflammasome activation by hyperglycemia due to cytoskeletal instability.

Science.gov (United States)

Thom, Stephen R; Bhopale, Veena M; Yu, Kevin; Huang, Weiliang; Kane, Maureen A; Margolis, David J

2017-11-03

Microparticles are lipid bilayer-enclosed vesicles produced by cells under oxidative stress. MP production is elevated in patients with diabetes, but the underlying cellular mechanisms are poorly understood. We hypothesized that raising glucose above the physiological level of 5.5 mm would stimulate leukocytes to produce MPs and activate the nucleotide-binding domain, leucine-rich repeat pyrin domain-containing 3 (NLRP3) inflammasome. We found that when incubated in buffer with up to 20 mm glucose, human and murine neutrophils, but not monocytes, generate progressively more MPs with high interleukin (IL)-1β content. Enhanced MP production required generation of reactive chemical species by mitochondria, NADPH oxidase, and type 2 nitric-oxide synthase (NOS-2) and resulted in S -nitrosylation of actin. Depleting cells of capon (C-terminal PDZ ligand of neuronal nitric-oxide synthase protein), apoptosis-associated speck-like protein containing C-terminal caspase recruitment domain (ASC), or pro-IL-1β prevented the hyperglycemia-induced enhancement of reactive species production, MP generation, and IL-1β synthesis. Additional components required for these responses included inositol 1,3,5-triphosphate receptors, PKC, and enhancement of filamentous-actin turnover. Numerous proteins become localized to short filamentous actin in response to S -nitrosylation, including vasodilator-stimulated phosphoprotein, focal adhesion kinase, the membrane phospholipid translocation enzymes flippase and floppase, capon, NLRP3, and ASC. We conclude that an interdependent oxidative stress response to hyperglycemia perturbs neutrophil cytoskeletal stability leading to MP production and IL-1β synthesis. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

Conducting financial due diligence of medical practices.

Science.gov (United States)

Louiselle, P

1995-12-01

Many healthcare organizations are acquiring medical practices in an effort to build more integrated systems of healthcare products and services. This acquisition activity must be approached cautiously to ensure that medical practices being acquired do not have deficiencies that would jeopardize integration efforts. Conducting a thorough due diligence analysis of medical practices before finalizing the transaction can limit the acquiring organizations' legal and financial exposure and is a necessary component to the acquisition process. The author discusses the components of a successful financial due diligence analysis and addresses some of the risk factors in a practice acquisition.

Requirements on sealing measures due to gas production

Energy Technology Data Exchange (ETDEWEB)

Arens, G.; Hoeglund, L.; Wiborgh, M.

1995-03-01

Since 1981 the former rock salt mine Bartensleben near Morsleben (former GDR) ERAM has been in operation as a repository for low and intermediate level radioactive waste. As a result of the reunification and the changed licensing situation a new closure concept for the repository has to be developed. During the post-operational phase of a repository for radioactive waste gas may be produced by corrosion of metals, microbial degradation and radiolytic decomposition. In the process of developing the concept to be used for backfilling and sealing in ERAM it is important that gas formed in the repository will not disrupt the barrier against radionuclide escape or enhance the radionuclide release. To evaluate the performance and the properties for a bentonite plug as the main element of the sealings gas transport modelling with TOUGH were performed. Due to the lack of site-specific data literature data were used. Consequently, large uncertainties in data remain at present, which were taken into account by a great number of parameter variations. To handle this a course discretisation for the calculations were developed. Started with a two-dimensional grid at the end the calculations were performed with a coarse one-dimensional grid. The primary question to answer in these calculations is if there is a risk for excessive pressurization of the repository caverns as a result of gas generation. In the reference case a maximum pressure of approximately 10 Mpa inside a cavern is reached after 1000 years which seems not to jeopardize the integrity of the repository.

Methods For Calculating Thyroid Doses to The Residents Of Ozersk Due to 131I Releases From The Stacks of The Mayak Production Association

Energy Technology Data Exchange (ETDEWEB)

Rovny, Sergey I.; Mokrov, Y.; Stukalov, Pavel M.; Beregich, D. A.; Teplyakov, I. I.; Anspaugh, L. R.; Napier, Bruce A.

2009-10-23

The Mayak Production Association (MPA) was established in the late 1940s in accordance with a special Decree of the USSR Government for the production of nuclear weapons. In early years of MPA operation, due to the lack of experience and absence of effective methods of RW management, the enterprise had extensive routine (designed) and non-routine (accidental) releases of gaseous radioactive wastes to the atmosphere. These practices resulted in additional technogenic radiation exposure of residents inhabiting populated areas near the MPA. The primary objective of ongoing studies under JCCRER Project 1.4 is to estimate doses to the residents of Ozersk due to releases of radioactive substances from the stacks of MPA. Preliminary scoping studies have demonstrated that releases of radioactive iodine (131I) from the stacks of the Mayak Radiochemical Plant represented the major contribution to the dose to residents of Ozersk and of other nearby populated areas. The behavior of 131I in the environment and of 131I migration through biological food chains (vegetation-cows-milk-humans) indicated a need for use of special mathematical models to perform the estimation of radiation doses to the population. The goal of this work is to select an appropriate model of the iodine migration in biological food chains and to justify numerical values of the model parameters.

Hygienic estimation of population doses due to stratospheric fallout

International Nuclear Information System (INIS)

Marej, A.N.; Knizhnikov, V.A.

1980-01-01

The hygienic estimation of external and internal irradiation of the USSR population due to stratospheric global fallouts of fission products after nuclear explosions and weapon tests, is carried out. Numerical values which characterize the dose-effect dependence in the case of radiation of marrow, bone tissue and whole body are presented. Values of mean individual and population doses of irradiation due to global fallouts within 1963-1975, types of injury and the number of mortal cases due to malignant neoplasms are presented. A conclusion is made that the contribution of radiation due to stratospheric fallouts in the mortality due to malignant neoplasms is insignificant. Annual radiation doses, conditioned by global fallouts within the period of 1963-1975 constitute but several percent from the dose of radiation of the natural radiation background. Results of estimation of genetic consequences of irradiation due to atmospheric fallouts are presented

Monitoring the Perturbation of Soil and Groundwater Microbial Communities Due to Pig Production Activities

KAUST Repository

Hong, Pei-Ying; Yannarell, A. C.; Dai, Q.; Ekizoglu, M.; Mackie, R. I.

2013-01-01

This study aimed to determine if biotic contaminants originating from pig production farms are disseminated into soil and groundwater microbial communities. A spatial and temporal sampling of soil and groundwater in proximity to pig production farms

Caprine and ovine Greek dairy products: The official German method generates false-positive results due to κ-casein gene polymorphism.

Science.gov (United States)

Tsartsianidou, V; Triantafillidou, D; Karaiskou, N; Tarantili, P; Triantafillidis, G; Georgakis, E; Triantafyllidis, A

2017-05-01

Caseins are widely used for species identification of dairy products. Isoelectric focusing (IEF) of para-κ-casein peptide is used as the official German method for the differentiation between caprine (isoform A) and ovine (isoform B) dairy products, based on their different isoelectric points. The discrimination between Greek goat and ewe dairy products using IEF has, however, been shown to be problematic because of the existence of the ewe isoform in milk from Greek indigenous dairy goats. This could be due to nucleotide polymorphisms within the goat κ-casein gene of Greek indigenous breeds, which alter the isoelectric point of the para-κ-casein peptide and lead to false positive results. Previous DNA analysis of the goat κ-casein gene has shown high levels of polymorphism; however, no such information is available for Greek indigenous dairy goats. Therefore, 87 indigenous dairy goats were sequenced at exon IV of κ-casein gene. In total, 9 polymorphic sites were detected. Three nonsynonymous point mutations were identified, which change the isoelectric point of the goat para-κ-casein peptide so that it appears identical to that of the ewe peptide. Ten composite genotypes were reconstructed and 6 of them included the problematic point mutations. For the verification of genetic results, IEF was carried out. Both goat and ewe patterns appeared in the problematic genotypes. The frequency of these genotypes could be characterized as moderate (0.23) to high (0.60) within Greek indigenous breeds. However, this is not an issue restricted to Greece, as such genotypes have been detected in various non-Greek goat breeds. In conclusion, IEF based on the official German method is certainly inappropriate for ovine and caprine discrimination concerning Greek dairy goat products, and consequently a new method should be established. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

The Annual Dose for Qena Generative Population Due to Consume the Animal Products

International Nuclear Information System (INIS)

Harb, S.; Sahalel Din, K.; Abbady, A.; Saad, N.

2010-01-01

Several kinds of cattle and poultry fodder samples collected from South Valley University and Qena governorate farm, Qena, Upper Egypt were estimated for their natural radioactivity concentrations due to Ra-226, Ra-228, Th-232 and K-40 radionuclides. Twenty nine fodder samples were analyzed by using low-level gamma-spectrometric. Based on radionuclides concentrations in animal fodder and annual consumption rate, the human health risk from irradiation due to indirect ingestion can be assessed. The annual effective dose from these radionuclides, which may reach the local consumer through beef, milk, poultry and eggs consumption have been estimated as 2.7 E +00, 1.4 E +01, 1.0 E -01 and 1.4 E -01 μSv/y, respectively

Management system in the dose assessment due to the intake of "1"3"1I in occupationally exposed workers (OEW) in a radioisotope production plant

International Nuclear Information System (INIS)

Koga, Roberto; Jara, Raul; Defilippi, Luis; Osores, Jose

2015-01-01

This article presents the evaluation and management processes due to the incorporation of "1"3"1I in occupationally exposed workers (OEW) of a Radioisotope Production Plant by in vivo measurement of the retained activity of this radionuclide in thyroid. The procedures for the occupational control of the OWE were established, including intermediate checks and calibration of the equipment according to the NTP ISO/IEC 17025:2006 standard. (author)

Estimation of effective dose from the atmospheric nuclear tests due to the intake of marine products

International Nuclear Information System (INIS)

Nakano, Masanao

2008-01-01

The worldwide environmental protection is required by the public. A long-term environmental assessment from nuclear fuel cycle facilities to the aquatic environment also becomes more important to understand long-term risk of nuclear energy. Evaluation of long-term risk including not only in Japan but also in neighboring countries is considered to be necessary in order to develop sustainable nuclear power industry. The author successfully simulated the distribution of radionuclides in seawater and seabed sediment produced by atmospheric nuclear tests using LAMER (Long-term Assessment ModEl of Radionuclides in the oceans). A part of the LAMER calculated the advection-diffusion-scavenging processes for radionuclides in the oceans and the Japan Sea in cooperate with Oceanic General Circulation Model (OGCM) and was validated. The author is challenging to calculate probabilistic effective dose suggested by ICRP from intake of marine products due to atmospheric nuclear tests using the Monte Carlo method in the other part of LAMER. Depending on the deviation of each parameter, the 95th percentile of the probabilistic effective dose was from one third to two thirds of the 95th percentile of the deterministic effective dose in proforma calculation. It means that probabilistic assessment can contribute to the design and optimisation of a nuclear fuel cycle facility. (author)

Secondary Hemochromatosis due to Chronic Oral Iron Supplementation

Directory of Open Access Journals (Sweden)

Ronald Lands

2017-01-01

Full Text Available Iron may accumulate in excess due to a mutation in the HFE gene that upregulates absorption or when it is ingested or infused at levels that exceed the body’s ability to clear it. Excess iron deposition in parenchymal tissue causes injury and ultimately organ dysfunction. Diabetes mellitus and hepatic cirrhosis due to pancreas and liver damage are just two examples of diseases that result from iron overload. Despite the rapid growth of information regarding iron metabolism and iron overload states, the most effective treatment is still serial phlebotomies. We present a patient who developed iron overload due to chronic ingestion of oral ferrous sulfate. This case illustrates the importance of querying geriatric patients regarding their use of nonprescription iron products without a medical indication.

Model Integrasi Penjadwalan Produksi Batch dan Penjadwalan Perawatan dengan Kendala Due Date

Directory of Open Access Journals (Sweden)

Zahedi .

2014-01-01

Full Text Available This paper discusses the integration model of batch production and preventive maintenance scheduling on a single machine producing an item to be delivered at a common due date. The machine is a deteriorating machine that requires preventive maintenance to ensure the availability of the machine at a desired service level. Decision variables of the model are the number of preventive maintenances, the schedule, length of production runs, as well as the number of batches, batch sizes and the production schedule of the resulting batches for each production run. The objective function of the model is to minimize the total cost consisting of inventory costs during parts processing, setup cost and cost of preventive maintenance. The results show three important points: First, the sequence of optimal batches always follows the SPT (short processing time. Second, variation of preventive maintenance unit cost does not influence the sequence of batches. Third, the first production run length from production starting time is smaller than the next production run length and this pattern continues until the due date. When in process inventory unit cost is increased, the pattern will continue until a specified cost limit, and beyond the limit the pattern will change to be the opposite pattern.

Calculation of stricken to mortality and incidence cancers due to beyond design basis accidents of the Esfahan Fuel Production Factory

International Nuclear Information System (INIS)

Heydari Azar, A.; Shahshahani, M.; Roshanzamir, M.; Sabouhi, R.

2008-01-01

In this investigation the amount of absorbed doses by the different pathways of Cloud shine, Ground shine, deposition of radioactive materials on skin and cloths, ingestion, inhalation and the consequences of radioactive material releases due to Beyond Design Basis Accidents such as fire, sintering furnace explosion, criticality and earthquake in Esfahan Fuel Production factory by the residents are evaluated. The calculations related to atomic cloud distribution, estimation of delivered dose and decay chains are performed by PCCOSYMA dose. These computations are based on radioactive source terms, distribution height of radioactive materials. actions for reducing the absorbed dose, human body physiological characteristics, metrological condition and population distribution. Finally, the number of peoples who are stricken to mortality and morbidity cancers and risk values are calculated for 1 year and 50 years

Production planning of a perishable product with lead time and non-stationary demand

NARCIS (Netherlands)

Pauls-Worm, K.G.J.; Haijema, R.; Hendrix, E.M.T.; Rossi, R.; Vorst, van der J.G.A.J.

2012-01-01

We study a production planning problem for a perishable product with a fixed lifetime, under a service-level constraint. The product has a non-stationary stochastic demand. Food supply chains of fresh products like cheese and several crop products, are characterised by long lead times due to

Can Wet Rocky Granular Flows Become Debris Flows Due to Fine Sediment Production by Abrasion?

Science.gov (United States)

Arabnia, O.; Sklar, L. S.; Bianchi, G.; Mclaughlin, M. K.

2015-12-01

Debris flows are rapid mass movements in which elevated pore pressures are sustained by a viscous fluid matrix with high concentrations of fine sediments. Debris flows may form from coarse-grained wet granular flows as fine sediments are entrained from hillslope and channel material. Here we investigate whether abrasion of the rocks within a granular flow can produce sufficient fine sediments to create debris flows. To test this hypothesis experimentally, we used a set of 4 rotating drums ranging from 0.2 to 4.0 m diameter. Each drum has vanes along the boundary ensure shearing within the flow. Shear rate was varied by changing drum rotational velocity to maintain a constant Froude Number across drums. Initial runs used angular clasts of granodiorite with a tensile strength of 7.6 MPa, with well-sorted coarse particle size distributions linearly scaled with drum radius. The fluid was initially clear water, which rapidly acquired fine-grained wear products. After each 250 m tangential distance, we measured the particle size distributions, and then returned all water and sediment to the drums for subsequent runs. We calculate particle wear rates using statistics of size and mass distributions, and by fitting the Sternberg equation to the rate of mass loss from the size fraction > 2mm. Abundant fine sediments were produced in the experiments, but very little change in the median grain size was detected. This appears to be due to clast rounding, as evidenced by a decrease in the number of stable equilibrium resting points. We find that the growth in the fine sediment concentration in the fluid scales with unit drum power. This relationship can be used to estimate fine sediment production rates in the field. We explore this approach at Inyo Creek, a steep catchment in the Sierra Nevada, California. There, a significant debris flow occurred in July 2013, which originated as a coarse-grained wet granular flow. We use surveys to estimate flow depth and velocity where super

Extra entropy production due to non-equilibrium phase transitions in relativistic heavy ion reactions

International Nuclear Information System (INIS)

Csernai, L.P.; Lukacs, B.

1984-04-01

In a fluid-dynamical model the extra entropy production is calculated which arises from a non-equilibrium phase transition from nuclear to quark matter. The dynamics of processes producing extra entropy are treated in linear approximation. It is shown that there is a considerable extra entropy production provided the transition is not too fast. In measuring the entropy at the break-up, an excess entropy might signalize the phase transition to a transient quark-gluon plasma. (D.Gy.)

Numerical analysis of temperature distribution due to basement radiogenic heat production, St. Lawrence Lowlands, eastern Canada

Science.gov (United States)

Liu, Hejuan; Giroux, Bernard; Harris, Lyal B.; Mansour, John

2017-04-01

Although eastern Canada is considered as having a low potential for high-temperature geothermal resources, the possibility for additional localized radioactive heat sources in Mesoproterozoic Grenvillian basement to parts of the Palaeozoic St. Lawrence Lowlands in Quebec, Canada, suggests that this potential should be reassessed. However, such a task remains hard to achieve due to scarcity of heat flow data and ambiguity about the nature of the basement. To get an appraisal, the impact of radiogenic heat production for different Grenville Province crystalline basement units on temperature distribution at depth was simulated using the Underworld Geothermal numerical modelling code. The region south of Trois-Rivières was selected as representative for the St. Lawrence Lowlands. An existing 3D geological model based on well log data, seismic profiles and surface geology was used to build a catalogue of plausible thermal models. Statistical analyses of radiogenic element (U, Th, K) concentrations from neighbouring outcropping Grenville domains indicate that the radiogenic heat production of rocks in the modelled region is in the range of 0.34-3.24 μW/m3, with variations in the range of 0.94-5.83 μW/m3 for the Portneuf-Mauricie (PM) Domain, 0.02-4.13 μW/m3 for the Shawinigan Domain (Morin Terrane), and 0.34-1.96 μW/m3 for the Parc des Laurentides (PDL) Domain. Various scenarios considering basement characteristics similar to the PM domain, Morin Terrane and PDL Domain were modelled. The results show that the temperature difference between the scenarios can be as much as 12 °C at a depth of 5 km. The results also show that the temperature distribution is strongly affected by both the concentration of radiogenic elements and the thermal conductivity of the basement rocks. The thermal conductivity in the basement affects the trend of temperature change between two different geological units, and the spatial extent of thermal anomalies. The validity of the results was

Lowest cost due to highest productivity and highest quality

Science.gov (United States)

Wenk, Daniel

2003-03-01

Since global purchasing in the automotive industry has been taken up all around the world there is one main key factor that makes a TB-supplier today successful: Producing highest quality at lowest cost. The fact that Tailored Blanks, which today may reach up to 1/3 of a car body weight, are purchased on the free market but from different steel suppliers, especially in Europe and NAFTA, the philosophy on OEM side has been changing gradually towards tough evaluation criteria. "No risk at the stamping side" calls for top quality Tailored- or Tubular Blank products. Outsourcing Tailored Blanks has been starting in Japan but up to now without any quality request from the OEM side like ISO 13919-1B (welding quality standard in Europe and USA). Increased competition will automatically push the quality level and the ongoing approach to combine high strength steel with Tailored- and Tubular Blanks will ask for even more reliable system concepts which enables to weld narrow seams at highest speed. Beside producing quality, which is the key to reduce one of the most important cost driver "material scrap," in-line quality systems with true and reliable evaluation is going to be a "must" on all weld systems. Traceability of all process related data submitted to interfaces according to customer request in combination with ghost-shift-operation of TB systems are tomorrow's state-of-the-art solutions of Tailored Blank-facilities.

Turbulence production due to secondary vortex cutting in a turbine rotor

Science.gov (United States)

Binder, A.

1985-10-01

Measurements of the unsteady flow field near and within a turbine rotor were made by means of a Laser-2-Focus velocimeter. The testing was performed in a single-stage cold-air turbine at part-load and near-design conditions. Random unsteadiness and flow angle results indicate that the secondary vortices of the stator break down after being cut and deformed by the rotor blades. A quantitative comparison shows that some of the energy contained in these secondary vortices is thereby converted into turbulence energy in the front part of the rotor. An attempt is made to explain this turbulence energy production as caused by the vortex breakdown.

[Cervical lymphoadenopathy due to Pseudomonas aeruginosa following mesotherapy].

Science.gov (United States)

Shaladi, Ali Muftah; Crestani, Francesco; Bocchi, Anna; Saltari, Maria Rita; Piva, Bruno; Tartari, Stefano

2009-09-01

Mesotherapy is a treatment method devised for controlling several diseases by means of subcutaneous microinjections given at or around the affected areas at short time intervals. It is used to treat a variety of medical conditions, amongst which all orthopaedic diseases and rheumatic pain. Mesotherapy is especially indicated for neck pain. The mechanism of action is twofold: a pharmacological effect due to the drug administered, and a reflexogenic effect, the skin containing many nerve endings that are sensitive to the mechanical action of the needle. Although this therapy is safe, like any other medical intervention it cannot be considered free of complications that may occur, such as allergies, haematomas, bruising, wheals, granulomas and telangiectasias. Infective complications are also possible, due to pathogenic bacteria that are inoculated through contamination of products, of the materials used for the procedure or even from germs on the skin. We present the case of a patient who had cervical lymphadenopathy due to Pseudomonas aeruginosa after mesotherapy treatment for neck pain.

Deletion of Proton Gradient Regulation 5 (PGR5) and PGR5-Like 1 (PGRL1) proteins promote sustainable light-driven hydrogen production in Chlamydomonas reinhardtii due to increased PSII activity under sulfur deprivation.

Science.gov (United States)

Steinbeck, Janina; Nikolova, Denitsa; Weingarten, Robert; Johnson, Xenie; Richaud, Pierre; Peltier, Gilles; Hermann, Marita; Magneschi, Leonardo; Hippler, Michael

2015-01-01

Continuous hydrogen photo-production under sulfur deprivation was studied in the Chlamydomonas reinhardtii pgr5 pgrl1 double mutant and respective single mutants. Under medium light conditions, the pgr5 exhibited the highest performance and produced about eight times more hydrogen than the wild type, making pgr5 one of the most efficient hydrogen producer reported so far. The pgr5 pgrl1 double mutant showed an increased hydrogen burst at the beginning of sulfur deprivation under high light conditions, but in this case the overall amount of hydrogen produced by pgr5 pgrl1 as well as pgr5 was diminished due to photo-inhibition and increased degradation of PSI. In contrast, the pgrl1 was effective in hydrogen production in both high and low light. Blocking photosynthetic electron transfer by DCMU stopped hydrogen production almost completely in the mutant strains, indicating that the main pathway of electrons toward enhanced hydrogen production is via linear electron transport. Indeed, PSII remained more active and stable in the pgr mutant strains as compared to the wild type. Since transition to anaerobiosis was faster and could be maintained due to an increased oxygen consumption capacity, this likely preserves PSII from photo-oxidative damage in the pgr mutants. Hence, we conclude that increased hydrogen production under sulfur deprivation in the pgr5 and pgrl1 mutants is caused by an increased stability of PSII permitting sustainable light-driven hydrogen production in Chlamydomonas reinhardtii.

Environmental Impact Analysis of Acidification and Eutrophication Due to Emissions from the Production of Concrete

Directory of Open Access Journals (Sweden)

Tae Hyoung Kim

2016-06-01

Full Text Available Concrete is a major material used in the construction industry that emits a large amount of substances with environmental impacts during its life cycle. Accordingly, technologies for the reduction in and assessment of the environmental impact of concrete from the perspective of a life cycle assessment (LCA must be developed. At present, the studies on LCA in relation to greenhouse gas emission from concrete are being carried out globally as a countermeasure against climate change. However, the studies on the impact of the substances emitted in the concrete production process on acidification and eutrophication are insufficient. As such, assessing only a single category of environmental impact may cause a misunderstanding about the environmental friendliness of concrete. The substances emitted in the concrete production process have an impact not only on global warming but also on acidification and eutrophication. Acidification and eutrophication are the main causes of air pollution, forest destruction, red tide phenomena, and deterioration of reinforced concrete structures. For this reason, the main substances among those emitted in the concrete production process that have an impact on acidification and eutrophication were deduced. In addition, an LCA technique through which to determine the major emissions from concrete was proposed and a case analysis was carried out. The substances among those emitted in the concrete production process that are related to eutrophication were deduced to be NOx, NH3, NH4+, COD, NO3−, and PO43−. The substances among those emitted in the concrete production process that are related to acidification, were found to be NOx, SO2, H2S, and H2SO4. The materials and energy sources among those input into the concrete production process, which have the biggest impact on acidification and eutrophication, were found to be coarse aggregate and fine aggregate.

Particle transport due to magnetic fluctuations

International Nuclear Information System (INIS)

Stoneking, M.R.; Hokin, S.A.; Prager, S.C.; Fiksel, G.; Ji, H.; Den Hartog, D.J.

1994-01-01

Electron current fluctuations are measured with an electrostatic energy analyzer at the edge of the MST reversed-field pinch plasma. The radial flux of fast electrons (E>T e ) due to parallel streaming along a fluctuating magnetic field is determined locally by measuring the correlated product e B r >. Particle transport is small just inside the last closed flux surface (Γ e,mag e,total ), but can account for all observed particle losses inside r/a=0.8. Electron diffusion is found to increase with parallel velocity, as expected for diffusion in a region of field stochasticity

Gas production due to alpha particle degradation of polyethylene and polyvinylchloride

International Nuclear Information System (INIS)

Reed, D.T.; Hoh, J.; Emery, J.; Okajima, S.; Krause, T.

1998-07-01

Alpha particle degradation experiments were performed on polyethylene (PE) and polyvinylchloride (PVC) plastic samples typical of Westinghouse Savannah River Company (WSRC) transuranic (TRU) waste. This was done to evaluate the effects of sealing TRU waste during shipment. Experiments were conducted at three temperatures using low dose rates. Predominant products from both plastics were hydrogen, carbon dioxide, and various organic species, with the addition of hydrochloric acid from PVC. In all experiments, the total pressure decreased. Irradiation at 30 and 60 C and at various dose rates caused small changes for both plastics, but at 100 C coupled thermal-radiolytic effects included discoloration of the material as well as large differences in the gas phase composition

Production of thyrotropin receptor antibodies in acute phase of infectious mononucleosis due to Epstein-Barr virus primary infection: a case report of a child.

Science.gov (United States)

Nagata, Keiko; Okuno, Keisuke; Ochi, Marika; Kumata, Keisuke; Sano, Hitoshi; Yoneda, Naohiro; Ueyama, Jun-Ichi; Matsushita, Michiko; Kuwamoto, Satoshi; Kato, Masako; Murakami, Ichiro; Kanzaki, Susumu; Hayashi, Kazuhiko

2015-01-01

Various autoantibodies have been reported to be detected during the progression of infectious mononucleosis. We observed a case of infectious mononucleosis due to Epstein-Barr virus primary infection for 2 months, and noticed the transiently increased titer of thyrotropin receptor autoantibodies detected at the acute phase on the 3rd day after admission. At that time, real-time quantitative PCR also revealed the mRNA expressions of an immediate early lytic gene, BZLF1, and a latent gene, EBNA2. The expression of BZLF1 mRNA means that Epstein-Barr virus infects lytically, and EBNA2 protein has an important role in antibody production as well as the establishment of Epstein-Barr virus latency. These results suggest that Epstein-Barr virus lytic infection is relevant to thyrotropin receptor autoantibody production. Thyrotropin receptor autoantibodies stimulate thyroid follicular cells to produce excessive thyroid hormones and cause Graves' disease. Recently, we reported the thyrotropin receptor autoantibody production from thyrotropin receptor autoantibody-predisposed Epstein-Barr virus-infected B cells by the induction of Epstein-Barr virus lytic infection in vitro. This case showed in vivo findings consistent with our previous reports, and is important to consider the pathophysiology of Graves' disease and one of the mechanisms of autoimmunity.

Quantifying the Limitation to World Cereal Production Due To Soil Phosphorus Status

Science.gov (United States)

Kvakić, Marko; Pellerin, Sylvain; Ciais, Philippe; Achat, David L.; Augusto, Laurent; Denoroy, Pascal; Gerber, James S.; Goll, Daniel; Mollier, Alain; Mueller, Nathaniel D.; Wang, Xuhui; Ringeval, Bruno

2018-01-01

Phosphorus (P) is an essential element for plant growth. Low P availability in soils is likely to limit crop yields in many parts of the world, but this effect has never been quantified at the global scale by process-based models. Here we attempt to estimate P limitation in three major cereals worldwide for the year 2000 by combining information on soil P distribution in croplands and a generic crop model, while accounting for the nature of soil-plant P transport. As a global average, the diffusion-limited soil P supply meets the crop's P demand corresponding to the climatic yield potential, due to the legacy soil P in highly fertilized areas. However, when focusing on the spatial distribution of P supply versus demand, we found strong limitation in regions like North and South America, Africa, and Eastern Europe. Averaged over grid cells where P supply is lower than demand, the global yield gap due to soil P is estimated at 22, 55, and 26% in winter wheat, maize, and rice. Assuming that a fraction (20%) of the annual P applied in fertilizers is directly available to the plant, the global P yield gap lowers by only 5-10%, underlying the importance of the existing soil P supply in sustaining crop yields. The study offers a base for exploring P limitation in crops worldwide but with certain limitations remaining. These could be better accounted for by describing the agricultural P cycle with a fully coupled and mechanistic soil-crop model.

Validation of Product Properties Considering a High Variety of Complex Products

OpenAIRE

Kortler, S.;Kohn, A.;Lindemann, U.

2017-01-01

Validation processes are becoming more and more complex. Due to rising technical capabilities and a wide variety of customer requirements, OEMs are increasing their product variety in order to increase profits. According to the various characteristics of subcontracted components involved in complex products, the product variety can be very high. The impacts of the involved subcontracted components on the composed product variety during the product’s application are difficult to predict. This ...

Ion cyclotron emission due to collective instability of fusion products and beam ions in TFTR and JET

International Nuclear Information System (INIS)

Dendy, R.O.; Clements, K.G.; Lashmore-Davies, C.N.; Cottrell, G.A.; Majeski, R.; Cauffman, S.

1995-06-01

Ion cyclotron emission (ICE) has been observed from neutral beam-heated TFTR and JET tritium experiments at sequential cyclotron harmonics of both fusion products and beam ions. The emission originates from the outer mid-plane plasma, where fusion products and beam ions are likely to have a drifting ring-type velocity-space distribution which is anisotropic and sharply peaked. Fusion product-driven ICE in both TFTR and JET can be attributed to the magnetoacoustic cyclotron instability, which involves the excitation of obliquely propagating waves on the fast Alfven/ion Bernstein branch at cyclotron harmonics of the fusion products. Differences between ICE observations in JET and TFTR appear to reflect the sensitivity of the instability growth rate to the ratio υ birth /c A , where υ birth is the fusion product birth speed and c A is the local Alfven speed:for fusion products in the outer midplane edge of TFTR, υ birth A ; for alpha-particles in the outer midplane edge of JET, the opposite inequality applies. If sub-Alfvenic fusion products are isotropic or have undergone even a moderate degree of thermalization, the magnetoacoustic instability cannot occur. In contrast, the super-Alfvenic alpha-particles which are present in the outer mid-plane of JET can drive the magnetoacoustic cyclotron instability even if they are isotropic or have a relatively broad distribution of speeds. These conclusions may account for the observation that fusion product-driven ICE in JET persists for longer than fusion product-driven ICE in TFTR. (Author)

RAMs: the problem of transient errors due to alpha radiation

International Nuclear Information System (INIS)

Goujon, Pierre.

1980-01-01

Errors that remained unexplained for a long time have occurred with dynamic random access memories. It has been known since 1978 that they are due to stray alpha radiation. A good understanding of this phenomenon enables its effects to be neutralized and the reliability of the products to be guarantied [fr

Resolving traceability issues of product derivation for software product lines

OpenAIRE

Abid, Saad bin

2009-01-01

peer-reviewed Dealing with traceability management issues during model based product derivation in large complex industrial SPL is error prone due to the lack of tool support. As a result traceability management between connected models emerges as an important research topic. In this position paper, we discuss research challenges as scenarios from developed example product line and give recommendations on resolving traceability issues during product derivation. We also discuss initial idea...

Constraints due to the production of radioactive ion beams in the SPIRAL project

International Nuclear Information System (INIS)

Leroy, R.; Huguet, Y.; Jardin, P.; Marry, C.; Pacquet, J.Y.; Villari, A.C.C.

1997-01-01

The radioactive ion beams that will be delivered by the SPIRAL facility will be produced by the interaction of a stable high energy and high intensity primary ion beam delivered by the GANIL cyclotrons with a carbon target heated to 2000 deg C. During this interaction, some radioactive atoms will be created and will diffuse out of the target before entering into an electron cyclotron resonance ion source where they will be ionized and extracted. The production of radioactive ion beams with this method implies high radiation fields that activate and can damage materials located in the neighborhood of the target. Therefore, the production system which is composed of the permanent magnet ECR ion source coupled to a graphite target will be changed after two weeks of irradiation. As this ensemble will be very radioactive, this operation has to be supervised by remote control. The radiation levels around the target-ion source system and a detailed description of the different precautions that have been taken for safety and for prevention of contamination and irradiation are presented. (author)

Methods for reducing internal collective doses due to contamination of agricultural lands

International Nuclear Information System (INIS)

Prister, B.S.; Novikova, N.K.; Tkachenko, N.V.; Nagovisyna, L.I.; Berezhnaya, T.I.; Semenyuk, N.D.; Rudoj, V.M.

1990-01-01

Radioactive contamination of agricultural lands in 30 km vicinity of Chernobyl NPP asw well as agricultural products involved in food chains is considered. Attention is paid to population collective doses due to intake of contaminated food. It is shown that target optimization of agricultural production structure in territories where food contamination does not result in increase of population dose limit lies in achievement of minimal inclusion of radionuclides in human diet

Due diligence responsibilities of the professional geologist

International Nuclear Information System (INIS)

Hobbs, G.W.

1991-01-01

Whether in the role of independent consultant or company employee, a geologist has certain professional obligations in the evaluation of an oil and gas submittal from a third party. 'Due diligence' is the term used to describe the analysis of an investment opportunity. Due diligence involves a multidisciplinary examination of both the technical and business aspects of a submittal. In addition to the obvious geological considerations, prospect evaluations should include relevant details about the specific technical documentation reviewed, information sources, and how the data were verified. Full disclosure of ownership, technical risks, and negative aspects of the prospect should be included along with the positive elements. After the geological analysis is completed, the economic merits of the prospect should be analyzed, incorporating all lease burdens and terms of participation into the calculations. Estimated exploration, development, and operating costs, together with projected annual production, cash flow, and reserves must be examined as to their reasonableness. Finally, the due diligence review should include a thorough check on the reputation, financial condition, technical and managerial expertise, and prior track record of the operator. Bank, trade, legal, and prior partner references should be contacted. The successful professional geologist in today's competitive world must have multidisciplinary skills. A solid background in geology and geophysics, a basic understanding of the principles of petroleum engineering and economics, and the wits of a private eye are needed for good due diligence work

Ion cyclotron emission due to collective instability of fusion products and beam ions in TFTR and JET

International Nuclear Information System (INIS)

Dendy, R.O.; McClements, K.G.; Lashmore Davies, C.N.; Cottrell, G.A.; Majeski, R.; Cauffman, S.

1995-01-01

Ion cyclotron emission (ICE) has been observed from neutral beam heated TFTR and JET tritium experiments at sequential cyclotron harmonics of both fusion products and beam ions. The emission originates from the outer midplane plasma, where fusion products and beam ions are likely to have a drifting ring-type velocity-space distribution that is anisotropic and sharply peaked. Fusion product driven ICE can be attributed to the magnetoacoustic cyclotron instability, which involves the excitation of obliquely propagating waves on the fast Alfven/ion Bernstein branch at cyclotron harmonics of the fusion products. Differences between ICE observations in JET and TFTR appear to reflect the sensitivity of the instability growth rate to the ratio υ birth /c A , where υ birth is the fusion product birth speed and c A is the local Alfven speed: for fusion products in the outer midplane edge of TFTR supershots, υ birth A ; for alpha particles in the outer midplane edge of JET, the opposite inequality applies. If sub-Alfvenic fusion products are isotropic or have undergone even a moderate degree of thermalization, the magnetoacoustic instability cannot occur. In contrast, the super-Alfvenic alpha particles that are present in the outer midplane of JET can drive the magnetoacoustic cyclotron instability even if they are isotropic or have a relatively broad distribution of speeds. These conclusions may account for the observation that fusion product driven ICE in JET persists for longer than fusion product driven ICE in TFTR. A separate mechanism is proposed for the excitation of beam driven ICE in TFTR: electrostatic ion cyclotron harmonic waves, supported by strongly sub-Alfvenic beam ions, can be destabilized by a low concentration of such ions with a very anrrow spread of velocities in the parallel direction. 25 refs, 14 figs

Energy losses in magnetically insulated transmission lines due to microparticles

International Nuclear Information System (INIS)

Gray, E.W.; Stinnett, R.W.

1987-01-01

We discuss the effects of high-velocity and hypervelocity microparticles in the magnetically insulated transmission lines of multiterawatt accelerators used for particle beam fusion and radiation effects simulation. These microparticles may be a possible source for plasma production near the anode and cathode in early stages of the voltage pulse, and current carriers during and after the power pulse, resulting in power flow losses. Losses in the current pulse, due to microparticles, are estimated to be approximately 12 mA/cm 2 (0.3 kA) as a lower limit, and --0.3 A/cm 2 (7.2 kA) for microparticle initiated, anode plasma positive ion transport. We have calculated the velocities reached by these microparticles and the effects on them of Van der Waals forces. Field emission from the particles and their effects on cathode and anode plasma formation have been examined. Particle collision with the electrodes is also examined in terms of plasma production, as in the electron deposition in the particles in transit across the anode-cathode gap. Blistering of the electrode surface, thought to be due to H - bombardment was also observed and appears to be consistent with losses due to negative ions previously reported by J. P. VanDevender, R. W. Stinnett, and R. J. Anderson [App. Phys. Lett. 38, 229 (1981)

DYSTOCIA DUE TO SOFT TISSUE

Science.gov (United States)

DeCarle, Donald W.

1954-01-01

In dystocia caused by abnormal conditions of the soft parts, the etiologic changes may be either in the genital tissues or in adjacent soft structures. Broadly, the conditions causing the difficulty may be grouped as follows: (1) anomalies or congenital modifications; (2) tumors; (3) modifications due to age, accident or surgical operations; (4) modification of the expulsive forces; (5) abnormalities of the products of conception. Often in such circumstances cesarean section is necessary. Sometimes when tumor is present it can be removed before it interferes with delivery, but decision to excise the growth must be guided by such factors as the location of the lesion and the stage of gestation. This would determine to what extent the maintenance of pregnancy would be jeopardized by surgical intervention before term. PMID:13190430

Due diligence

International Nuclear Information System (INIS)

Sanghera, G.S.

1999-01-01

The Occupational Health and Safety (OHS) Act requires that every employer shall ensure the health and safety of workers in the workplace. Issues regarding the practices at workplaces and how they should reflect the standards of due diligence were discussed. Due diligence was described as being the need for employers to identify hazards in the workplace and to take active steps to prevent workers from potentially dangerous incidents. The paper discussed various aspects of due diligence including policy, training, procedures, measurement and enforcement. The consequences of contravening the OHS Act were also described

In vivo and in vitro control of Leishmania mexicana due to garlic-induced NO production.

Science.gov (United States)

Gamboa-León, M R; Aranda-González, I; Mut-Martín, M; García-Miss, M R; Dumonteil, E

2007-11-01

Leishmania mexicana is the main causal agent of cutaneous leishmaniasis in the Yucatán peninsula in Mexico. Control of this disease is associated with a Th1-type immune response and garlic extract has been reported as a Th1 immunomodulator in BALB/c mice infected with Leishmania major. In this study, we investigated the effect of garlic extracts on L. mexicana infection in vivo and in vitro. Garlic extract reduced footpad lesions in L. mexicana-infected BALB/c mice by inducing IFN-gamma production from T cells. In vitro, garlic extract reduced macrophage infection through induction of nitric oxide (NO) production. Garlic extract may thus act on both T cells and macrophages to stimulate IFN-gamma production and NO synthesis for parasite killing. A 10- to 14-kDa fraction was identified as responsible for the in vitro effect of the whole extract and may lead to the identification of novel immunomodulating drugs and therapeutic alternatives for the treatment of leishmaniasis.

Towards an Integrated Workload Control (WLC) Concept : The Performance of Due Date Setting Rules in Job Shops with Contingent Orders

NARCIS (Netherlands)

Thuerer, Matthias; Stevenson, Mark; Silva, Cristovao; Land, Martin

2013-01-01

Workload control (WLC) is a production planning and control concept developed for make-to-order companies. Its customer enquiry management methodology supports due date setting, while its order release mechanism determines when to start production. For make-to-order companies, due date setting is a

PERFORMANCE DETERIORATION OF THERMOSIPHON SOLAR FLAT PLATE WATER HEATER DUE TO SCALING

OpenAIRE

arunachala umesh chandavar

2011-01-01

The performance of Flat plate Solar Water Heater deteriorates within five to twelve years of their installation due to factors related to manufacturing, operating conditions, lack of maintenance etc. Especially, problem due to scaling is significant as it is based on quality of water used. The remaining factors are system dependent and could be overcome by quality production. Software is developed by incorporating Hottel Whillier Bliss (H-W-B) equation to ascertain the effect of scaling o...

Enhanced J/psi suppression due to gluon depletion

OpenAIRE

Hwa, R. C.; Pisut, J.; Pisutova, N.

1997-01-01

The nonlinear effect of gluon depletion in the collision of large nuclei can be large. It is due to multiple scatterings among comoving partons initiated by primary scattering of partons in the colliding nuclei. The effect can give rise to substantial suppression of $J/\\psi$ production in very large nuclei, even if the linear depletion effect is insignificant for the collisions of nuclei of smaller sizes. This mechanism offers a natural explanation of the enhanced suppression in the Pb-Pb dat...

Health Risks Due to the Use of Clenbuterol Hydrochloride: a Review

Directory of Open Access Journals (Sweden)

Benjamín Valladares-Carranza

2015-09-01

Full Text Available This paper analyzes and evaluates information about the characteristics and risks of using Clenbuterol hydrochloride (CCL for their potential toxic effects, due to its inclusion in animal food (cattle, pigs, sheep and poultry to improve productive-reproductive parameters, but neglecting food safety. Therefore, it is necessary to reassess the potential dangers that may result when used in both human and veterinary medicine. The β-adrenergic synthetic CCL, white powder, anhydrous, highly water soluble and highly stable at room temperature is used in a clandestine manner to fatten animals for human consumption. Therapeutically, it is used as a bronchodilator drug (asthma patients; its illegal use (doping has been detected in sports competitions, and it is used for bodybuilding due to its anabolic effect. Its use in cattle for slaughter modifies and increases the growth of muscle mass and reduces fat accumulation, which accumulates in different organs. In people with a history of bovine liver consumption contaminated with CCL, there has been registration of: tremor, muscle pain, dizziness, headache, and tachycardia. In Mexico, in an illegal and clandestine manner, there is distribution, marketing and use of CCL; however, the work of livestock organizations in registering production units free of this substance will ensure the consumption of meat products. Moreover, to propose the use of other substances which so far have no signs of toxicity will lead to a sustainable, secure and safe productivity in livestock units.

Occupational Health Impacts Due to Exposure to Organic Chemicals over an Entire Product Life Cycle.

Science.gov (United States)

Kijko, Gaël; Jolliet, Olivier; Margni, Manuele

2016-12-06

This article presents an innovative approach to include occupational exposures to organic chemicals in life cycle impact assessment (LCIA) by building on the characterization factors set out in Kijko et al. (2015) to calculate the potential impact of occupational exposure over the entire supply chain of product or service. Based on an economic input-output model and labor and economic data, the total impacts per dollar of production are provided for 430 commodity categories and range from 0.025 to 6.6 disability-adjusted life years (DALY) per million dollar of final economic demand. The approach is applied on a case study assessing human health impacts over the life cycle of a piece of office furniture. It illustrates how to combine monitoring data collected at the manufacturing facility and averaged sector specific data to model the entire supply chain. This paper makes the inclusion of occupational exposure to chemicals fully compatible with the LCA framework by including the supply chain of a given production process and will help industries focus on the leading causes of human health impacts and prevent impact shifting.

Quantum effects on Higgs-boson production and decay due to Majorana neutrinos

International Nuclear Information System (INIS)

Kniehl, B.A.

1994-02-01

We analyze the phenomenological implications for new electroweak physics in the Higgs sector in the framework of SU(2) L x U(1) Y theories that naturally predict heavy Majorana neutrinos. We calculate the one-loop Majorana-neutrino contributions to the decay rates of the Higgs boson into pairs of quarks and intermediate bosons and to its production cross section via bremsstrahlung in e + e - collisions. It turns out that these are extremely small in three-generation models. On the other hand, the sizeable quantum corrections generated by a conventional fourth generation with a Dirac neutrino may be screened considerably in the presence of a Majorana degree of freedom. (orig.)

Mineral decline due to modernization of food habits.

Science.gov (United States)

Henry, Christiani Jeyakumar; Bi, Xinyan; Lim, Joseph; Lau, Evelyn

2016-01-01

Calcium and other micronutrients are essential for health and well-being. Dairy products are the main sources of calcium in western countries. In most regions of Asia, the consumption of these products is limited due to the lactose intolerance and costs. A major contributor to the micronutrients intake in this region is the consumption of small fish, such as anchovies. Traditionally, dried anchovies are consumed as a whole body. Recently, an increasingly popular method of eating anchovies has been to eat it in a cleaned, eviscerated form. This brief communication highlights how "modernization" of food habits may have unintentional nutritional consequences. A minor change in the dietary habits of eating cleaned anchovies may lead to a reduction in micronutrients intake. This reinforces the need for caution when we modernize our traditional eating habits. Copyright © 2015 Elsevier Ltd. All rights reserved.

Thermodynamics and economic feasibility of acetone production from syngas using the thermophilic production host Moorella thermoacetica

NARCIS (Netherlands)

Redl, Stephanie; Sukumara, Sumesh; Ploeger, Tom; Wu, Liang; Ølshøj Jensen, Torbjørn; Nielsen, Alex Toftgaard; Noorman, H.J.

2017-01-01

Background: Syngas fermentation is a promising option for the production of biocommodities due to its abundance and compatibility with anaerobic fermentation. Using thermophilic production strains in a syngas fermentation process allows recovery of products with low boiling point from the off-gas

Geomechanical production optimization in faulted and fractured reservoirs

NARCIS (Netherlands)

Heege, J.H. ter; Pizzocolo, F.; Osinga, S.; Veer, E.F. van der

2016-01-01

Faults and fractures in hydrocarbon reservoirs are key to some major production issues including (1) varying productivity of different well sections due to intersection of preferential flow paths with the wellbore, (2) varying hydrocarbon column heights in different reservoir compartments due to

Device for measuring fission product density

International Nuclear Information System (INIS)

Kaneda, Mitsunori.

1980-01-01

Purpose: To determine the fission product density of xenon or the like and enable measurement of real time of fission product density in a reactor by calculating the disintegration and annihilation of the fission product on the basis of neutron detected output. Constitution: The neutron flux in a reactor is detected by a detector, and applied to first and second density calculators. Second fission product density signal of xenon or the like outputted from first device is again inputted to the device to form an annihilation signal due to disintegration to determine the present density of the second fission product of xenon or the like corresponding to the decrease of the neutron due to the poison of xeron or the like. Similarly, second device determines the first fission product density of iodine or the like. (Sekiya, K.)

How product trial changes quality perception of four new processed beef products

DEFF Research Database (Denmark)

Saeed, Faiza; Grunert, Klaus G; Therkildsen, Margrethe

2013-01-01

evaluation, quality evaluation and purchase motive fulfillment. For two of the tested products, trial resulted in a decline of the evaluation of cues, quality and purchase motive fulfillment compared to pre-trial expectations. For these products, positive expectations were created by giving information about...... and gender, which may be due to underlying differences in previous experience. The study gives useful insights for testing of new processed meat products before market introduction....

In Vitro Drug Transfer Due to Drug Retention in Human Epidermis Pretreated with Application of Marketed Estradiol Transdermal Systems.

Science.gov (United States)

Krishnaiah, Yellela S R; Pavurala, Naresh; Yang, Yang; Manda, Prashanth; Katragadda, Usha; Yang, Yongsheng; Shah, Rakhi; Fang, Guodong; Khan, Mansoor A

2017-08-01

Study objective was to assess skin-to-skin drug transfer potential that may occur due to drug retention in human epidermis (DRE) pretreated with application of estradiol transdermal drug delivery systems (TDDS) and other estradiol transdermal dosage forms (gels and sprays). TDDS (products-A, B, and C) with varying formulation design and composition, and other estradiol transdermal products (gel and spray) were applied to heat separated human epidermis (HSE) and subjected to in vitro drug permeation study. Amounts of DRE were quantified after 24 h. The DRE with product-B was significantly (P  0.05) amounts of DRE. A separate in vitro permeation study was carried out to determine amounts of drug transferred from drug-retaining epidermis to untreated HSE. The amounts of drug transferred, due to DRE after 8 h, with product-C were significantly (P drug transfer due to the DRE after labeled period of using estradiol TDDS, though the clinical relevance of these findings is yet to be determined.

Confectionery products (halva type obtained from sunflower: production technology and quality alterations. A review

Directory of Open Access Journals (Sweden)

Mureşan, V.

2013-01-01

Full Text Available Sunflower "halva" is a popular and widely enjoyed confectionery product specific to the countries of Eastern Europe. Conventional halva has historically been produced from sesame seeds in the Middle East and Northern Africa. However, in the production of halva in Eastern Europe, sesame seeds have been largely replaced by sunflower seeds, due to the high availability of sunflower in this region and the comparable taste of the final product. Due to the importance of the cost of raw materials in the food industry, utilization of sunflower seeds in halva production may be of great interest worldwide because it offers the possibility of significantly lowering production costs. Nevertheless, oil separation and storage techniques must be perfected if sunflower halva is to fulfill its promise of becoming a cost effective alternative to sesame seed halva on a worldwide scale. The aims of this review are firstly, to describe the current state of sunflower halva technology, secondly, to isolate the main problems affecting the quality of the final product, and thirdly, to suggest areas of further research necessary to move sunflower halva production closer to reaching its full potential on the world market.

Costs resulting from premature mortality due to cardiovascular causes: A 20-year follow-up of the DRECE study.

Science.gov (United States)

Gómez-de la Cámara, A; Pinilla-Domínguez, P; Vázquez-Fernández Del Pozo, S; García-Pérez, L; Rubio-Herrera, M A; Gómez-Gerique, J A; Gutiérrez-Fuentes, J A; Rivero-Cuadrado, A; Serrano-Aguilar, P

2014-10-01

Cardiovascular diseases are still the leading cause of death in Spain. The DRECE study (Diet and Cardiovascular Disease Risk in Spain), based on a representative cohort of the Spanish general population, analyzed nutritional habits and lifestyle and their association with morbidity and mortality patterns. We estimated the impact, in terms of loss of productivity, of premature mortality attributed to cardiovascular diseases. The loss of productivity attributed to premature mortality was calculated from 1991, based on the potential years of life lost and the potential years of working life lost. During the 20-year follow-up of a cohort of 4779 patients, 225 of these patients died (men, 152). Sixteen percent of the deaths were attributed to cardiovascular disease. The costs due to lost productivity by premature mortality exceeded 29 million euros. Of these, 4 million euros (14% of the total cost) were due to cardiovascular causes. Premature cardiovascular mortality in the DRECE cohort represented a significant social cost due to lost productivity. Copyright © 2014 Elsevier España, S.L.U. All rights reserved.

Loss of productivity due to neck/shoulder symptoms and hand/arm symptoms: Results from the PROMO-study

NARCIS (Netherlands)

Heuvel, S.G. van den; IJmker, S.; Blatter, B.M.; Korte, E.M. de

2007-01-01

Introduction: The objective of the present study is to describe the extent of productivity loss among computer workers with neck/shoulder symptoms and hand/arm symptoms, and to examine associations between pain intensity, various physical and psychosocial factors and productivity loss in computer

[Chronic bone pain due to raised FGF23 production? The importance of determining phosphate levels

NARCIS (Netherlands)

Jongh, R.T. de; Vervloet, M.G.; Bravenboer, N.; Heijboer, A.C.; Heijer, M. den; Lips, P.

2013-01-01

Hypophosphatemia is an important finding in the evaluation of patients with chronic bone pain. Fibroblast-growth factor 23 (FGF23) plays a role in the differential diagnosis of hypophosphatemia. A 34-year-old man had progressive pain in both shoulders and hips due to hypophosphatemic osteomalacia.

Monitoring the Perturbation of Soil and Groundwater Microbial Communities Due to Pig Production Activities

KAUST Repository

Hong, Pei-Ying

2013-02-08

This study aimed to determine if biotic contaminants originating from pig production farms are disseminated into soil and groundwater microbial communities. A spatial and temporal sampling of soil and groundwater in proximity to pig production farms was conducted, and quantitative PCR (Q-PCR) was utilized to determine the abundances of tetracycline resistance genes (i.e., tetQ and tetZ) and integrase genes (i.e., intI1 and intI2). We observed that the abundances of tetZ, tetQ, intI1, and intI2 in the soils increased at least 6-fold after manure application, and their abundances remained elevated above the background for up to 16 months. Q-PCR further determined total abundances of up to 5.88 × 109 copies/ng DNA for tetZ, tetQ, intI1, and intI2 in some of the groundwater wells that were situated next to the manure lagoon and in the facility well used to supply water for one of the farms. We further utilized 16S rRNA-based pyrosequencing to assess the microbial communities, and our comparative analyses suggest that most of the soil samples collected before and after manure application did not change significantly, sharing a high Bray-Curtis similarity of 78.5%. In contrast, an increase in Bacteroidetes and sulfur-oxidizing bacterial populations was observed in the groundwaters collected from lagoon-associated groundwater wells. Genera associated with opportunistic human and animal pathogens, such as Acinetobacter, Arcobacter, Yersinia, and Coxiella, were detected in some of the manure-treated soils and affected groundwater wells. Feces-associated bacteria such as Streptococcus, Erysipelothrix, and Bacteroides were detected in the manure, soil, and groundwater ecosystems, suggesting a perturbation of the soil and groundwater environments by invader species from pig production activities.

Lean production

OpenAIRE

Veselková, Jana

2011-01-01

The goal of this Bachelor's Thesis is to describe the general principles of lean production and afterwards apply these principles in a particular company. Due to the changing conditions on the world market is among companies growing concern about such innovative business systems. The theoretical part of this work deals with the general characteristics of lean production, including their history and focus on Toyota, as the originator of most lean systems. Mentioned are also the economic aspect...

Single-machine scheduling with release dates, due dates and family setup times

NARCIS (Netherlands)

Schutten, Johannes M.J.; van de Velde, S.L.; van de Velde, S.L.; Zijm, Willem H.M.

1996-01-01

We address the NP-hard problem of scheduling n independent jobs with release dates, due dates, and family setup times on a single machine to minimize the maximum lateness. This problem arises from the constant tug-of-war going on in manufacturing between efficient production and delivery

PIGS BREEDING FOR THE PRODUCTION OF TRADITIONAL MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

Đuro Senčić

2014-06-01

Full Text Available The fertile Slavonia is known for production of several types of cured meats: kulen, kulen sis, sausage, ham and bacon, and other pork products (“krvavica” - blood sausage, “švargl” - a type of brawn where chopped parts of head are stuffed inside the pig’s stomach, “čvarci” - a variant of pork crisps, fat. These products require “mature pigs” of adequate slaughter quality. Production of pigs intended for traditional meat products may take place in different production systems (open, closed, semi-open, “organic”. Each of these systems provides a specific quality of pigs for slaughter, reflecting on the quality of the final product. Production systems can have a significant impact on growth performance and carcass and meat quality of pigs. This effect arises from the interaction between housing conditions, the amount and composition of food and used pig genotype. The choice of a production system depends on local production conditions, pig genotype, consumer demand (market for a given product quality, and other factors. Due to their quality, the traditional Slavonian meat products can become a recognizable Croatian brand in both domestic and international markets. Production of standard quality products requires standard quality of pigs. Therefore this book is focused on such pigs production.

77 FR 60727 - New Postal Product

Science.gov (United States)

2012-10-04

... Product AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a... product list. This notice addresses procedural steps associated with this filing. DATES: Comments are due... competitive product list.\\1\\ The Postal Service asserts that First- Class Package Service Contract 20 is a...

77 FR 60726 - New Postal Product

Science.gov (United States)

2012-10-04

... Product AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a... product list. This notice addresses procedural steps associated with this filing. DATES: Comments are due... 19 to the competitive product list.\\1\\ The Postal Service asserts that First- Class Package Service...

77 FR 60725 - New Postal Product

Science.gov (United States)

2012-10-04

... Product AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a... product list. This notice addresses procedural steps associated with this filing. DATES: Comments are due... competitive product list.\\1\\ The Postal Service asserts that First- Class Package Service Contract 16 is a...

77 FR 24996 - New Postal Product

Science.gov (United States)

2012-04-26

... Product AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a... product list. This notice addresses procedural steps associated with the filing. DATES: Comments are due... supporting information to add First-Class Package Service Contract 1 to the Competitive Product List.\\1\\ The...

77 FR 60729 - New Postal Product

Science.gov (United States)

2012-10-04

... Product AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a... product list. This notice addresses procedural steps associated with this filing. DATES: Comments are due... competitive product list.\\1\\ The Postal Service asserts that First- Class Package Service Contract 17 is a...

77 FR 60728 - New Postal Product

Science.gov (United States)

2012-10-04

... Product AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a... product list. This notice addresses procedural steps associated with this filing. DATES: Comments are due... competitive product list.\\1\\ The Postal Service asserts that First- Class Package Service Contract 18 is a...

77 FR 51583 - New Postal Product

Science.gov (United States)

2012-08-24

... Product AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a... product list. This notice addresses procedural steps associated with this filing. DATES: Comments are due... competitive product list.\\1\\ The Postal Service asserts that First- Class Package Service Contract 15 is a...

75 FR 65386 - New Postal Product

Science.gov (United States)

2010-10-22

... POSTAL REGULATORY COMMISSION [Docket No. CP2011-19; Order No. 562] New Postal Product AGENCY... product list. This notice addresses procedural steps associated with this filing. DATES: Comments are due... GEPS 1 as a product, also authorized functionally equivalent agreements to be included within the...

pH variations during diafiltration due to buffer nonidealities.

Science.gov (United States)

Baek, Youngbin; Yang, Deyu; Singh, Nripen; Arunkumar, Abhiram; Ghose, Sanchayita; Li, Zheng Jian; Zydney, Andrew L

2017-11-01

Diafiltration is used for final formulation of essentially all biotherapeutics. Several studies have demonstrated that buffer/excipient concentrations in the final diafiltered product can be different than that in the diafiltration buffer due to interactions between buffer species and the protein product. However, recent work in our lab has shown variations in solution pH that are largely independent of the protein concentration during the first few diavolumes. Our hypothesis is that these pH variations are due to nonidealities in the acid-base equilibrium coefficient. A model was developed for the diafiltration process accounting for the ionic strength dependence of the pK a . Experimental results obtained using phosphate and histidine buffers were in excellent agreement with model predictions. A decrease in ionic strength leads to an increase in the pK a for the phosphate buffer, causing a shift in the solution pH, even under conditions where the initial feed and the diafiltration buffer are at the same pH. This effect could be eliminated by matching the ionic strength of the feed and diafiltration buffer. The experimental data and model provide new insights into the factors controlling the pH profile during diafiltration processes. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1555-1560, 2017. © 2017 American Institute of Chemical Engineers.

Numerical simulation of the detection of crack in reinforced concrete structures of NPP due to expansion of reinforcing corrosive products using Impact-Echo method

Directory of Open Access Journals (Sweden)

Morávka Š.

2008-12-01

Full Text Available Nuclear energy boom is starting nowadays. But also current nuclear power plants (NPP are duty to certify their security for regular renewal of their operating licenses. NPP security can be significantly affected by defects of large amount of ageing reinforced concrete structures. Advanced Impact-Echo method seams to be very hopeful to cooperate at performing in-service inspections such structures. Just these in-service inspections are included in the first priority group of specific technical issues according to the recommendations of OECD-Nuclear Energy Agency, Commission on Safety of Nuclear Installation in the field of ageing management.This paper continues of extensive project dealing with Impact-Echo method application. It will present method description and main results of numerical modeling of detection and localization of crack caused by corrosive product expansion. Steel reinforcing rods are subjected to corrosion due to diffusion of corrosive agents from structure surface. Corrosive products have up to 7-times larger volume than pure steel. Raised strain can cad lead up to concrete failure and crack development. We investigate whether it is possible to detect these growing cracks by Impact-Echo method in time.Experimental verification of our numerical predictions is prepared on Civil Faculty in Brno.

Vapor pressure lowering effects due to salinity and suction pressure in the depletion of vapor-dominated geothermal reservoirs

Energy Technology Data Exchange (ETDEWEB)

Battistelli, A. [Aquater S.p.A., Pisa (Italy); Calore, C. [Istituto Internazionale per le Ricerche Geotermiche-CNR, Pisa (Italy); Pruess, K. [Lawrence Berkeley Lab., Berkeley, CA (United States)

1995-03-01

The equation-of-state module able to handle saline brines with non-condensible gas, developed for the TOUGH2 simulator, has been improved to include vapor pressure lowering (VPL) due to suction pressure as represented by Kelvin`s equation. In this equation the effects of salt are considered whereas those of non-condensible gas have currently been neglected. Numerical simulations of fluid production from tight matrix blocks have been performed to evaluate the impact of VPL effects due to salinity and suction pressure on the depletion behaviour of vapor-dominated geothermal reservoirs. Previous studies performed neglected VPL due to suction pressure showed that for initial NaCl mass fractions above threshold values, {open_quotes}sealing{close_quotes} of the block occurs and large amounts of liquid fluid may not be recovered. On the other hand, below the threshold value the matrix block dries out due to fluid production. The inclusion of VPL due to suction pressure does not allow complete vaporization of the liquid phase. As a result, the threshold NaCl concentration above which sealing of the matrix block occurs is increased. Above the {open_quotes}critical{close_quotes} NaCl concentration, block depletion behaviour with and without the VPL due to suction pressure is almost identical, as liquid phase saturation remains high even after long production times. As the VPL due to suction pressure depends mainly on capillary pressure, the shape of capillary pressure functions used in numerical simulations is important in determining VPL effects on block depletion.

Single-machine scheduling with release dates, due dates, and family setup times

NARCIS (Netherlands)

J.M.J. Schutten (Marco); S.L. van de Velde (Steef); W.H.M. Zijm

1996-01-01

textabstractWe address the NP-hard problem of scheduling n independent jobs with release dates, due dates, and family setup times on a single machine to minimize the maximum lateness. This problem arises from the constant tug-of-war going on in manufacturing between efficient production and delivery

Pair production in small angle Bhabha scattering

International Nuclear Information System (INIS)

Arbuzov, A.B.; Kuraev, Eh.A.; Merenkov, N.P.; Trentadue, L.

1995-01-01

The radiative corrections due to a pair production in the small angle high energy e + e - Bhabha scattering are considered. The corrections due to the production of virtual pairs as well as real soft and hard ones are calculated analytically. The collinear and semi-collinear kinematical regions of the hard pair production are taken into account. The results in the leading and next-to-leading logarithmic approximations provide the accuracy of Ο (0.1%). The results of numerical calculations show that the effects of pairs production are to be taken into account in the precise luminosity determination at LEP. 9 refs., 3 figs., 2 tabs

9 CFR 96.2 - Prohibition of casings due to African swine fever and bovine spongiform encephalopathy.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Prohibition of casings due to African swine fever and bovine spongiform encephalopathy. 96.2 Section 96.2 Animals and Animal Products ANIMAL... spongiform encephalopathy. (a) Swine casings. The importation of swine casings that originated in or were...

Environmental risks due to radionuclide releases Environmental Risks Due To Radionuclide Releases From The Oil And Gas Industry

International Nuclear Information System (INIS)

Steinhausler, F.

2005-01-01

Full text : Exploration and transport in the oil- and gas industry result in the release of elevated levels of natural radioactivity into the environment. This has the following impact: Due to the large volumes of water needed during the extraction of gas and oil the resulting waste water can contain increased concentration of natural radionuclides, such as radium (Ra 226) and its decay products; At the oil/water interface waste water and sludge precipitate and form scalings, containing elevated levels of radium (Ra 226); At oil- and gas extraction sites tanks and equipment can be coated with long-lived radon (Rn 222) decay products; Along oil- and gas pipelines (e.g., at compressor stations) radon (Rn 222) decay products can be deposited internally on metal surfaces, such as valves. Typical U 238-series concentration values in production water range from 8 to 42 kBq/ m3, respectively in scale from 1 to 1 000 kBq/kg. In addition, oil- and gas extraction results in significant releases of natural radionuclides to the atmosphere (Rn 222) and to the water (Th 228, Ra 226, Rn 222, Pb 210, Po 210); for example, about 0.15 GBq/a of Rn 222 are released to the atmosphere per 106 m3 of oil extracted. The disposal of large amounts of contaminated wastes (scales, sludges) represents an environmental problem for the scrap metal industry (recycling of steel pipes containing scales) and the housing industry (use of sludge for landfill below a residential area). Using data from the oil- and gas industry in Latin America, Europe and the Asia-Pacific region, the various exposure pathways are reviewed. Furthermore, the current efforts in defining a suitable regulatory framework are discussed

Estimating the cost of production stoppage

Science.gov (United States)

Delionback, L. M.

1979-01-01

Estimation model considers learning curve quantities, and time of break to forecast losses due to break in production schedule. Major parameters capable of predicting costs are number of units made prior to production sequence, length of production break, and slope of learning curve produced prior to break.

Dynamics of Sheep Production in Brazil

Directory of Open Access Journals (Sweden)

Samuel Rezende Paiva

2013-07-01

Full Text Available Sheep production is present on all continents and has been practiced in Brazil since the colonization. In this study, the multitemporal dynamics of sheep production in Brazil is examined using official government data (Brazilian Institute for Geography and Statistics-IBGE from 1976 to 2010. Maps of flock growth rates and growth acceleration maps by municipality were elaborated. The Southern states are seen to show a reduction in production mainly due to the wool crisis in the 1970s and 80s. The Northeast is seen to be important for meat production. More recently, centerwest and northern states have shown an increase in growth rates but this is still incipient. The maps of growth, acceleration and midpoint for sheep production showed a noticeable return to an increase in production in the South in recent years. The midpoint of production flow was in the northeast direction, which has stagnated. There was great dynamics in sheep production over the whole Brazilian territory, which affected supply chains due to the expansion of domestic and foreign markets. Areas with higher fluctuations in production are more vulnerable in terms of investment policies.

77 FR 64567 - Product List Change

Science.gov (United States)

2012-10-22

... Delivery service from the competitive product list due to low customer demand.\\2\\ It states that there are... POSTAL REGULATORY COMMISSION [Docket No. MC2013-3; Order No. 1503] Product List Change AGENCY... product list. This notice provides public notice of the Postal Service's filing, invites public comment...

78 FR 963 - New Postal Product

Science.gov (United States)

2013-01-07

... Product AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a recent... 4 to the competitive product list. This notice informs the public of the filing, invites public... product list.\\1\\ The Postal Service states that the addition is necessary due to changes in the non...

Radioactive commitment due to use of coal in power plants

International Nuclear Information System (INIS)

Fenger, J. and H. Flyger.

1980-11-01

A short review of the literature on release of radioactivity due to use of coal in power plants with the emphasis on the stack effluent and waste products. It is concluded that during normal operation coal fired power plants give a larger dose commitment than nuclear power plants, but both types have insignificant effects. The problem of waste management has never been studied in detail; ash deposit should probably be monitored. (Auth)

[Work days lost due to health problems in industry].

Science.gov (United States)

Yano, Sylvia Regina Trindade; Santana, Vilma Sousa

2012-05-01

This cross-sectional study estimated the prevalence of work days lost due to health problems and associated factors among industrial workers. The study population was a simple random cluster sample of 3,403 workers from 16 to 65 years of age in the city of Salvador, Bahia State, Brazil. Data were collected with individual home interviews. Among industrial workers, one-year prevalence of work days lost to health problems was 12.5%, of which 5.5% were directly work-related and 4.1% aggravated by work. There were no statistically significant differences when compared to other worker categories. Self-perceived workplace hazards, history of work-related injury, and poor self-rated health were associated with work days lost due to work-related injuries/diseases. The findings showed that work days lost are common among both industrial and non-industrial workers, thereby affecting productivity and requiring prevention programs.

User perception of product failures

NARCIS (Netherlands)

Keijzers, J.; Luyk - de Visser, I.M.; Mathijssen, R.W.M.

2009-01-01

Currently, the field of consumer electronics is one of the most challenging environments with respect to product design. Due to the combination of the continuous influx of new technology and the economic effects of globalization, it is now possible to create products with a functionality that was

Working Hours and Productivity

OpenAIRE

Collewet, Marion; Sauermann, Jan

2017-01-01

This paper studies the link between working hours and productivity using daily information on working hours and performance of a sample of call centre agents. We exploit variation in the number of hours worked by the same employee across days and weeks due to central scheduling, enabling us to estimate the effect of working hours on productivity. We find that as the number of hours worked increases, the average handling time for a call increases, meaning that agents become less productive. Th...

Mercury and methylmercury intake estimation due to seafood products for the Catalonian population (Spain)

OpenAIRE

2009-01-01

Abstract This study estimates mercury and methylmercury levels in fish and fishery products commercialized in the city of Barcelona from 2001 to 2007. Combining food levels data with the consumption data of 2158 people (as the median of two 24-hour-recall), the total Mercury intake of the Catalonian population was calculated. Mercury was detected in 32,8% of analyses samples. The general population average weekly intake of total mercury in Catalonian population was 0.783 ?g/k...

Productivity loss due to absenteeism and presenteeism by different instruments in patients with RA and subjects without RA

NARCIS (Netherlands)

Braakman-Jansen, Louise Marie Antoinette; Kuper, Ina H.; van de Laar, Mart A F J; Taal, Erik

2012-01-01

Objectives. To explore the impact of at-work productivity loss on the total productivity cost by different instruments in patients recently diagnosed with RA and controls without RA. Methods. Cross-sectional data were collected from outpatients with RA between December 2007 and February 2008. The

TNF-α as a potential mediator of cardiac dysfunction due to intracellular Ca2+-overload

International Nuclear Information System (INIS)

Zhang Ming; Xu Yanjun; Saini, Harjot K.; Turan, Belma; Liu, Peter P.; Dhalla, Naranjan S.

2005-01-01

TNF-α has been shown to be involved in cardiac dysfunction during ischemia/reperfusion injury; however, no information regarding the status of TNF-α production in myocardial injury due to intracellular Ca 2+ -overload is available in the literature. The intracellular Ca 2+ -overload was induced in the isolated rat hearts subjected to 5 min Ca 2+ -depletion and 30 min Ca 2+ -repletion (Ca 2+ -paradox). The Ca 2+ -paradox hearts exhibited a dramatic depression in left ventricular developed pressure, a marked elevation in left ventricular end diastolic pressure, and more than a 4-fold increase in TNF-α content. The ratio of cytosolic to homogenate nuclear factor-κB (NFκB) was decreased whereas the ratio of phospho-NFκB to total NFκB was increased in the Ca 2+ -paradox hearts. All these changes due to Ca 2+ -paradox were significantly attenuated upon treating the hearts with 100 μM pentoxifylline. These results suggest that activation of NFκB and increased production of TNF-α may play an important role in cardiac injury due to intracellular Ca 2+ -overload

A Classification Scheme for Production System Processes

DEFF Research Database (Denmark)

Sørensen, Daniel Grud Hellerup; Brunø, Thomas Ditlev; Nielsen, Kjeld

2018-01-01

Manufacturing companies often have difficulties developing production platforms, partly due to the complexity of many production systems and difficulty determining which processes constitute a platform. Understanding production processes is an important step to identifying candidate processes...... for a production platform based on existing production systems. Reviewing a number of existing classifications and taxonomies, a consolidated classification scheme for processes in production of discrete products has been outlined. The classification scheme helps ensure consistency during mapping of existing...

Monitoring of Land Deformation Due to Oil Production by InSAR Time Series Analysis Using PALSAR Data in Bolivarian Republic of Venezuela

Science.gov (United States)

Deguchi, Tomonori; Narita, Tatsuhiko

2015-05-01

The target area of this study is the Maracaibo sedimentary basin located in the western part of Bolivarian Republic of Venezuela. The full-scale exploration and development for oil resources in Venezuela which was the greatest oil-producing country in South America had begun at the Maracaibo sedimentary basin in the 1910s, and it was a center of the oil product in Venezuela until the 1980s. But, in most of oil fields in the Maracaibo sedimentary basin, there is concern over the drain on recoverable reserves due to deterioration, and the production amount of petroleum in Venezuela has been diminishing these days. Leveling and GPS surveying were carried out in the past, and they revealed that the large-scale subsidence phenomenon of which cumulative subsidence amount was approximately 5 meter had occurred. The authors applied the vertical displacement measurement by InSAR time series analysis using PALSAR data obtained in the Fine-beam and ScanSAR observation mode. As a result, it could be confirmed clear ground deformation in the surrounding of three oil fields (Tia Juana, Lagunillas and Bachaquero) and easily recognized that the areas of phase anomalies detected by this analysis had expanded and the number of interference fringes had increased over time. The annual velocity of vertical ground surface displacement measured by InSAR time series analysis was -51 mm per year, -103 mm per year and -58 mm per year in Tia Juana, Lagunillas and Bachaquero oil field respectively. The tendency that an earth surface shifted towards the center of phase anomalies was detected from the result of the horizontal ground change measurement. It was interpreted from Google Earth and Landsat images that oil-related facilities (mainly bowling stations) were built intensively over the areas where phase anomalies were detected. Therefore, it was inferred that there was a high association between the operation activity of the oil field and ground deformation. In addition, the deterioration

Topological aperiodicity for product systems over semigroups of Ore type

DEFF Research Database (Denmark)

Kwasniewski, Bartosz; Szymanski, Wojciech

2016-01-01

aperiodicity condition on the latter, we obtain the uniqueness theorem and a simplicity criterion for the algebras in question. These results generalize the corresponding ones for crossed products by discrete groups, due to Archbold and Spielberg, and for Exel's crossed products, due to Exel and Vershik...

Productive vegetation: relationships between net primary productivity, vegetation types and climate change in the Wet Tropics bioregion

International Nuclear Information System (INIS)

Ramirez, Vanessa Valdez; Williams, Stephen E.; VanDerWal, Jeremy

2007-01-01

Full text: Full text: There is now ample evidence demonstrating the impacts of climate change on biodiversity and human society (Walther ef a/. 2002). Numerous studies have shown climate change is one of the most significant threats to tropical forests, such as the Wet Tropics Heritage Area, due to their high biodiversity and endemism (Pounds ef al. 1999; Hughes 2000; Parmesan and Yohe 2003). Williams ef al. (2003) suggested that small shifts in net primary productivity (NPP) as a result of climate change could lead to potentially massive follow-on effects for the extremely diverse and vulnerable rainforest flora and fauna. It is therefore crucial to explore the relationships between NPP and local biodiversity, especially to create models for different climate change scenarios. Nevertheless, NPP in the Wet Tropics has yet to be estimated. This is the first study to provide a general NPP estimate for the Wet Tropics bioregion using climate surrogates (Schuur 2003). This technique estimates NPP in an accurate, repeatable, and cost-effective way. NPP values were linked to vegetation types and examined under various climatic and environmental conditions. Results show a significant difference in productivity according to vegetation types and climatic variables, with temperature and rainfall seasonality as the most important determining variables. Additionally, lowland and upland vegetations showed a significant difference in productivity patterns throughout the year. Vegetation types located above 1000 metres in altitude had the lowest values of mean annual productivity due to their high rainfall and low temperatures; vegetation types located below 600 metres showed increased productivity values during the wet season (December-March). Net primary productivity will certainly be impacted by changes in temperature and rainfall, due to climate change. Although an increase in NPP values can be predicted for upland areas, the more widely distributed lowlands will drastically

Retrospective Study of Reported Adverse Events Due to Complementary Health Products in Singapore From 2010 to 2016

Directory of Open Access Journals (Sweden)

Yimin Xu

2018-06-01

Full Text Available The objective of this study is to collate and analyse adverse event reports associated with the use of complementary health products (CHP submitted to the Health Sciences Authority (HSA of Singapore for the period 2010–2016 to identify various trends and signals for pharmacovigilance purposes. A total of 147,215 adverse event reports suspected to be associated with pharmaceutical products and CHP were received by HSA between 2010 and 2016. Of these, 143,191 (97.3% were associated with chemical drugs, 1,807 (1.2% with vaccines, 1,324 (0.9% with biological drugs (biologics, and 893 (0.6% with CHP. The number of adverse event reports associated with Chinese Proprietary Medicine, other complementary medicine and health supplements are presented. Eight hundred and ninety three adverse event reports associated with CHP in the 7-year period have been successfully collated and analyzed. In agreement with other studies, adverse events related to the “skin and appendages disorders” were the most commonly reported. Most of the cases involved dermal allergies (e.g., rashes associated with the use of glucosamine products and most of the adulterated products were associated with the illegal addition of undeclared drugs for pain relief. Dexamethasone, chlorpheniramine, and piroxicam were the most common adulterants detected. Reporting suspected adverse events is strongly encouraged even if the causality is not confirmed because any signs of clustering will allow rapid regulatory actions to be taken. The findings from this study help to create greater awareness on the health risks, albeit low, when consuming CHP and dispelling the common misconception that “natural” means “safe.” In particular, healthcare professionals and the general public should be aware of potential adulteration of CHP. The analysis of spontaneously reported adverse events is an important surveillance system in monitoring the safety of CHP and helps in the understanding of the

Towards product customization : An integrated order fulfillment system

NARCIS (Netherlands)

Zhang, L.; Lee, C.K.M.; Xu, Q.

To stay competitive, manufacturing companies nowadays pursue product customization: and configure-to-order(CTO) has been recognized as an ideal business model to implement product customization. Due to the complexities resulting from the large number of customized products, an increased attention

Improvement of production layout based on optimum production balancing scale results by using Moodie Young and Comsoal method

Science.gov (United States)

Ikhsan, Siregar; Ulina Anastasia Sipangkar, Tri; Prasetio, Aji

2017-09-01

This research was conducted at a make to order production system company which is engaged in the car body of the vehicle. One of the products produced is dump truck which is one kind of transportation for the transport of goods equipped with hydraulics to facilitate goods’ loading and unloading process. The company has 7 work stations with different cycle times. Companies often experience delays in order delivery. The production process on the production floor has not been done optimally where there is a build up of work in process in some work centres. The build up of work in process (WIP) products is seen in the welding and painting stations. Stacking that occurs on the production line may cause the company to be liable for damages due to delays in product completion. The WIP occurs due to unbalanced paths can be seen from the variance of cycle time of each station is very diverse. The time difference of each work element is due to the allocation of work elements to each work centre unevenly. On the basis of the allocation of uneven work elements, the dump truck assembly line is made. The analysis is done by using Moodie Young and Comsoal method to do the balancing of production line. The result of layout improvement by using systematic layout planning (SLP) method is change the composition of the work centre from 7 into 4 work centre which enables the movement of material to be more effective and efficient so that it can get an efficient and effective production trajectory and can solve existing problems. The result of the track balancing is then used as a guide in constructing a new layout based on the balancing result with the most optimum method.

"Product on Stopper" in a Lyophilized Drug Product: Cosmetic Defect or a Product Quality Concern?

Science.gov (United States)

Mehta, Shyam B; Roy, Shouvik; Yang, Han-Chang Cathy

2018-06-01

During manufacturing of a lyophilized drug product, operator errors in product handling during loading of product filled vials onto the lyophilizer can lead to a seemingly cosmetic defect which can impact certain critical quality attributes of finished product. In this study, filling of a formulated monoclonal antibody in vials was performed using a peristaltic pump filling unit, and subsequently, the product was lyophilized. After lyophilization, upon visual inspection, around 40% of vials had cosmetic defect with residual product around stopper of the vial and were categorized as "product on stopper" vials, whereas remaining 60% vials with no cosmetic defect were called "acceptable vials." Both groups of vials from 1 single batch were tested for critical quality attributes including protein concentration (ultraviolet absorbance at 280), residual moisture (Karl Fischer), sterility (membrane filtration), and container closure integrity (CCI) (blue dye ingress). Analysis of protein quality attributes such as aggregation, protein concentration, residual moisture showed no significant difference between vials with "product on stopper" and "acceptable vials." However, CCI of the "product on stopper" vials was compromised due to the presence of product around stopper of the vial. The results from this case study demonstrate the following 2 important findings: (1) that a seemingly cosmetic defect may impact product quality, compromising the integrity of the product and (2) that CCI test method can be used as an orthogonal method to sterility testing to evaluate sterility assurance of the product. The corrective action proposed to mitigate this defect is use of a larger sized vial that can potentially minimize this defect that arises because of product handling errors. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Accelerated Rates of Nitrogen Cycling and N2O Production in Salt Marsh Sediments due to Long-Term Fertilization

Science.gov (United States)

Peng, X.; Ji, Q.; Angell, J.; Kearns, P.; Bowen, J. L.; Ward, B. B.

2014-12-01

Intensified sedimentary production of nitrous oxide (N2O), one of the most potent greenhouse gases, is one of the many possible environmental consequences of elevated nitrogen (N) loading into estuarine ecosystems. This study investigates the response to over 40 years of fertilization of nitrogen removal processes in the sediments of the Great Sippewissett Marsh in Falmouth, MA. Sediment slurries were incubated (1.5 hr) with trace amounts (fertilized sediments (0.89 nmol hr-1 g-1 wet weight) was 30-fold higher than in unfertilized sediments. The ratio of N2O to N2 production was also significantly higher in fertilized sediments (2.9%) than in unfertilized sediments (1.2%). This highlights the disproportionally large effect of long-term fertilization on N2O production in salt marsh sediments. The reduced oxygen level and higher ammonium concentrations in situ probably contributed to the significant rise in N2O production as a result of long-term fertilization. When detected, anammox and coupled nitrification-denitrification accounted for 10% and 14% of the total N2 production in fertilized sediments (30.5 nmol hr-1 g-1 wet weight), respectively, whereas neither was detected in unfertilized sediments. Thus these experiments indicate that N loading has important effects on multiple N cycle processes that result in N loss and N2O production.

Evaluation of the population dose due to the gaseous emission of a radioisotopes production unit

International Nuclear Information System (INIS)

Gordon, A.M.P.L.; Jacomino, V.M.F.; Sordi, G.-M.A.A.

1990-05-01

In order to control the emission of gaseous radioactive iodine from the unit responsible for the production of radioisotopes of IPEN-CNEN/SP, a discharge monitoring is carried out. In 1988 an activity of 65 GBq of I-131 was discharged to the environment. Based upon this value and the site analysis, the effective equivalent dose in the general public was evaluated for normal operation and for an incidental discharge. The evaluation was carried out by using a diffusion atmospheric model, 500 to 7000 m away from the discharge point and using 8 different wind direction sectors. The critical group was identified as being the people who lives 3000 m far from the discharge point, in the diffusion sector NW. The dose evaluated at this point is 10 9 times lower than the annual dose limit for individual of the public, according to Radiological Protection Standards. The derived limit for discharge of iodine was also evaluated and it was concluded that the IPEN-CNEN/SP can increase their production up to a level which results in an annual discharge of 1,5 x 10 12 of I-131. (author) [pt

Kronecker Products on Preconditioning

KAUST Repository

Gao, Longfei

2013-01-01

techniques have become increasingly popular due to their great potential on large scale computation. In this work, we present preconditioning techniques for linear systems built with tensor product basis functions. Efficient algorithms are designed

Bio-fuel production potential in Romania

International Nuclear Information System (INIS)

Laurentiu, F.; Silvian, F.; Dumitru, F.

2006-01-01

The paper is based on the ESTO Study: Techno- Economic Feasibility of Large-Scale Production of Bio-Fuels in EU-Candidate Countries. Bio-fuel production has not been taken into account significantly until now in Romania, being limited to small- scale productions of ethanol, used mostly for various industrial purposes. However the climatic conditions and the quality of the soil are very suitable in the country for development of the main crops (wheat, sugar-beet, sunflower and rape-seed) used in bio-ethanol and bio-diesel production. The paper intended to consider a pertinent discussion of the present situation in Romania's agriculture stressing on the following essential items in the estimation of bio-fuels production potential: availability of feed-stock for bio-fuel production; actual productions of bio-fuels; fuel consumption; cost assessment; SWOT approach; expected trends. Our analysis was based on specific agricultural data for the period 1996-2000. An important ethanol potential (due to wheat, sugar-beet and maize cultures), as well as bio-diesel one (due to sun-flower and rape-seed) were predicted for the period 2005-2010 which could be exploited with the support of an important financial and technological effort, mainly from EU countries

Importance of systems biology in engineering microbes for biofuel production

Energy Technology Data Exchange (ETDEWEB)

Mukhopadhyay, Aindrila; Redding, Alyssa M.; Rutherford, Becky J.; Keasling, Jay D.

2009-12-02

Microorganisms have been rich sources for natural products, some of which have found use as fuels, commodity chemicals, specialty chemicals, polymers, and drugs, to name a few. The recent interest in production of transportation fuels from renewable resources has catalyzed numerous research endeavors that focus on developing microbial systems for production of such natural products. Eliminating bottlenecks in microbial metabolic pathways and alleviating the stresses due to production of these chemicals are crucial in the generation of robust and efficient production hosts. The use of systems-level studies makes it possible to comprehensively understand the impact of pathway engineering within the context of the entire host metabolism, to diagnose stresses due to product synthesis, and provides the rationale to cost-effectively engineer optimal industrial microorganisms.

Methylisothiazolinone: An Emergent Allergen in Common Pediatric Skin Care Products

OpenAIRE

Schlichte, Megan J.; Katta, Rajani

2014-01-01

Recalcitrant dermatitis, such as that of the hands, face, or genitals, may be due to allergic contact dermatitis (ACD) from ingredients in seemingly innocuous personal care products. Rising rates of allergy have been noted due to the preservative methylisothiazolinone (MI). This preservative is commonly found in skin and hair care products, especially wipes. This study evaluated the use of MI in products specifically marketed for babies and children and examined the associated marketing terms...

78 FR 59382 - New Postal Product

Science.gov (United States)

2013-09-26

... relevant to the customer's mailing profile, and cost coverage projections. Id. The Postal Service asks the... recently-filed Postal Service request to add a new product to the competitive product list. This document... due: September 27, 2013. ADDRESSES: Submit comments electronically by accessing the ``Filing Online...

Hypovolemic shock due to severe gastrointestinal bleeding in a child taking an herbal syrup

Directory of Open Access Journals (Sweden)

Paola Angela Moro

2011-01-01

Full Text Available We report the case of a 4-years-old boy who was admitted with hypovolemic shock due to a severe gastrointestinal bleeding. The esophagogastroduodenoscopy (EGDS showed hiatus hernia, erosions and ulcerations of the lower esophagus, possibly due to a gastroesophageal reflux, and a small duodenal erosion. The child was previously healthy and he had never shown any symptoms related to this condition. The only product taken by the child in the previous days was a syrup containing several herbs, among which Filipendula ulmaria (L. Maxim. and Salix spp. (known to contain salicylates, marketed as food and prescribed by his paediatrician to treat a mild cold accompanied by fever. Quali-quantitative analysis confirmed the presence of salicylates in the syrup. Naranjo algorithm showed a probable correlation between the onset of symptoms and the consumption of the herbal remedy. The child recovered after receiving intensive care. The product was withdrawn from Italian market.

Assessment of rice yield loss due to exposure to ozone pollution in Southern Vietnam

Energy Technology Data Exchange (ETDEWEB)

Danh, Ngo Thanh; Huy, Lai Nguyen; Oanh, Nguyen Thi Kim, E-mail: kimoanh@ait.ac.th

2016-10-01

The study domain covered the Eastern region of Southern of Vietnam that includes Ho Chi Minh City (HCMC) and five other provinces. Rice production in the domain accounted for 13% of the national total with three crop cycles per year. We assessed ozone (O{sub 3}) induced rice production loss in the domain for 2010 using simulated hourly surface O{sub 3} concentrations (WRF/CAMx; 4 km resolution). Simulated O{sub 3} was higher in January–February (largely overlaps the first crop) and September–December (third crop), and lower in March–June (second crop). Spatially, O{sub 3} was higher in downwind locations of HCMC and were comparable with observed data. Relative yield loss (RYL) was assessed for each crop over the respective growing period (105 days) using three metrics: AOT40, M7 and flux-based O{sub 3} dose of POD{sub 10}. Higher RYL was estimated for the downwind of HCMC. Overall, the rice production loss due to O{sub 3} exposure in the study domain in 2010 was the highest for the first crop (up to 25,800 metric tons), the second highest for the third crop (up to 21,500 tons) and the least for the second crop (up to 6800 tons). The low RYL obtained for the second crop by POD{sub 10} may be due to the use of a high threshold value (Y = 10 nmol m{sup −2} s{sup −1}). Linear regression between non-null radiation POD{sub 0} and POD{sub 10} had similar slopes for the first and third crop when POD{sub 0} was higher and very low slope for the second crop when POD{sub 0} was low. The results of this study can be used for the rice crop planning to avoid the period of potential high RYL due to O{sub 3} exposure. - Highlights: • Simulated O{sub 3} was used to assess rice yield loss in a domain of Southern Vietnam. • Exposure metrics of AOT40, M7, POD{sub 0} and POD{sub 10} were considered. • POD{sub 10} gave the highest rice production loss. • Higher production loss was found downwind of Ho Chi Minh City.

Assessment of rice yield loss due to exposure to ozone pollution in Southern Vietnam

International Nuclear Information System (INIS)

Danh, Ngo Thanh; Huy, Lai Nguyen; Oanh, Nguyen Thi Kim

2016-01-01

The study domain covered the Eastern region of Southern of Vietnam that includes Ho Chi Minh City (HCMC) and five other provinces. Rice production in the domain accounted for 13% of the national total with three crop cycles per year. We assessed ozone (O 3 ) induced rice production loss in the domain for 2010 using simulated hourly surface O 3 concentrations (WRF/CAMx; 4 km resolution). Simulated O 3 was higher in January–February (largely overlaps the first crop) and September–December (third crop), and lower in March–June (second crop). Spatially, O 3 was higher in downwind locations of HCMC and were comparable with observed data. Relative yield loss (RYL) was assessed for each crop over the respective growing period (105 days) using three metrics: AOT40, M7 and flux-based O 3 dose of POD 10 . Higher RYL was estimated for the downwind of HCMC. Overall, the rice production loss due to O 3 exposure in the study domain in 2010 was the highest for the first crop (up to 25,800 metric tons), the second highest for the third crop (up to 21,500 tons) and the least for the second crop (up to 6800 tons). The low RYL obtained for the second crop by POD 10 may be due to the use of a high threshold value (Y = 10 nmol m −2 s −1 ). Linear regression between non-null radiation POD 0 and POD 10 had similar slopes for the first and third crop when POD 0 was higher and very low slope for the second crop when POD 0 was low. The results of this study can be used for the rice crop planning to avoid the period of potential high RYL due to O 3 exposure. - Highlights: • Simulated O 3 was used to assess rice yield loss in a domain of Southern Vietnam. • Exposure metrics of AOT40, M7, POD 0 and POD 10 were considered. • POD 10 gave the highest rice production loss. • Higher production loss was found downwind of Ho Chi Minh City.

Mobile materials handling platform interface architecture for mass production environments

CSIR Research Space (South Africa)

Walker, A

2008-01-01

Full Text Available Industrial manufacturing systems achieve production stability due to near constant production processes e.g. mass production. Passive methods such as production flow analysis can produce plant layouts which optimise material flow within...

Productivity in Swedish electricity retail distribution

International Nuclear Information System (INIS)

Hjalmarsson, L.; Veiderpass, A.

1992-01-01

This paper examines productivity growth in electricity retail distribution in Sweden in a multiple output-multiple input framework. The approach used is nonparametric Data Envelopment Analysis (DEA). Productivity is measured by means of the Malmquist index. Productivity comparisons are made between different types of ownership and between different service areas. The study indicates a high rate of productivity growth, due to economics of density, when measured over a period of 17 years. The results show no significant differences in productivity growth between different types of ownership or economic organization. (20 refs., 1 fig., 4 tabs.)

Economics of Gypsum Production in Iran

Science.gov (United States)

Esmaeili, Abdoulkarim

The purpose of this research is to analyze the economics of gypsum production in Iran. The trend in production cost, selling price and profit are used to investigate economics of gypsum production. In addition, the multivariate time series method is used to determine factors affecting gypsum price in domestic market. The results indicated that due to increase in production and inflation, profitability of gypsum production has decreased during recent years. It is concluded that tariff and non-tariff barriers on mines machinery are among reasons for increasing production cost in Iranian gypsum mines. Decreasing such barriers could increase profitability of gypsum production in Iran.

Production, characterisation and flocculation mechanism of ...

African Journals Online (AJOL)

Sidney Tsolanku ST. Maliehe

2016-09-30

Sep 30, 2016 ... of TMT-1 implied that it has a promise in industrial applications. Key words: ... biotechnological applications due to their cost ... Optimisation of culture conditions for bioflocculant production ..... industrial by-product of economic insignificant (Smith, ... absorption of the nutrients and enzymatic activity of. 0. 0.1.

Fermentative Alcohol Production

DEFF Research Database (Denmark)

Martín, Mariano; Sánchez, Antonio; Woodley, John M.

2018-01-01

In this chapter we present some of key principles of bioreactor design for the production of alcohols by fermentation of sugar and syngas . Due to the different feedstocks, a detailed analysis of the hydrodynamics inside the units , bubble columns or stirred tank reactors , the gas-liquid mass...

Strategy for the assessment of the radiation exposure at workplaces due to radon and radon decay products

International Nuclear Information System (INIS)

Czarwinski, R.; Lehmann, R.

1996-01-01

According to the future EU basic standards the exposures to radon decay products have to be taken into consideration. Therefore it is necessary to investigate: * which working operation could be connected with an increased exposure to radon decay products, * which workplaces have to be considered, * how many employees could be afflicted, * which methods should be applied for the investigation and - as for as necessary - for supervision. On the basis of the current radiation protection legislation in the new Federal Lands working operations which are connected with radon exposures have already been monitored. For instance, in 1994 3095 persons were supervised, 2422 of them were engaged in clean-up operations at wismut facilities (including underground work) and 673 at non-uranium mines and facilities (conventional mining), water treatment plants, show caves and spas. The extension of the monitoring to similar workplaces in the old Federal Lands is going to discussed in implementation of the EU standards. Beyond it further workplaces affected by radon and radon decay products exist. Therefore it is helpful to get an overview about the kinds of workplaces and the number of afflicted employees. (author)

Cosmic-ray production rates of neon isotopes in meteorite minerals

International Nuclear Information System (INIS)

Bhandari, N.

1988-01-01

The rates of production of 21 Ne and 22 Ne in spallation reactions, both due to solar as well as galactic cosmic rays, in some major meteoritic minerals, e.g. olivines, feldspars and pyroxenes, are calculated using their energy spectra and excitation functions. The production profiles of 21 Ne and 22 Ne due to galactic cosmic rays, and the 22 Ne/ 21 Ne ratio depend upon the size of the meteoroid. The 22 Ne/ 21 Ne ratio is very sensitive to the abundance of sodium and consequently its depth profile is distinctly different in feldspars, the ratio increasing with depth rather than decreasing as in pyroxenes and olivines. In the near-surface regions, up to a depth of 2 cm, production due to solar flare protons dominates, giving rise to a steep gradient in isotopic production as well as in the 22 Ne/ 21 Ne ratio. Composite production profiles are given and compared with measurements in some meteorites. (author). 22 refs

Particle production in the new inflationary cosmology

International Nuclear Information System (INIS)

Abbott, L.F.; Farhi, E.; Massachusetts Inst. of Tech., Cambridge; Massachusetts Inst. of Tech., Cambridge; Wise, M.B.

1982-01-01

Techniques are developed for computing particle production due to the time dependence of a scalar field expectation value during a phase transition. We review the new version of the inflationary universe and discuss baryon production in this model. (orig.)

Collaborative product development in CAD and CAPP, an approach based on communication due to constraint conflicts and user initiative

NARCIS (Netherlands)

Salomons, O.W.; Kuipers, J.M.; van de Graaff, J.; van Slooten, F.; van Slooten, F.; van Houten, Frederikus J.A.M.; Kals, H.J.J.

1995-01-01

This paper addresses collaborative product development, focusing on computer support of collaboration between users of CAD systems alone, between users of CAPP systems alone and between users of both CAD and CAPP systems. Computer support of collaborative product development may enhance informal

RECONSIDERING ECONOMIC PRODUCTIVITY

Directory of Open Access Journals (Sweden)

RIS A. MIHAI

2014-12-01

Full Text Available Economy has changed significantly over the past century, in part due to the scientific discoveries, due to the industrial revolution, to the research, development and innovation, but maybe the most important contributor to the economic development is the human resource. We have witnessed significant changes enhancing the levels of productivity, both labor and capital. This paper analyzes productivity in relation to its social and sustainability dimension. The paper follows a previous study, highlighting the most important findings identified and reinterpreting them on the basis of the most recent research papers produced by the scholars in the field. The analysis is focused on the most unsustainable economies worldwide, respectively, the United Arab Emirates, Qatar, Belgium, Kuwait, Singapore, Netherlands, Republic of Korea, Israel, Saudi Arabia, Macedonia, Japan and the United States of America – selected by considering their per capita ecological deficit. The research uses statistical data provided by the United Nations Development Program, the World Bank and the Global Footprint Network. The research combines economical, development and environmental indexes in our attempt to evaluate productivity and to adjust it so that it considers the ecological deficit of the nations. The research hypothesis that generated the study is: the levels of economic productivity obtained by countries are not limited by their biocapacities. The empirical analysis will verify the research question advocating for the need to consider the limited capacity of the planet, in term of natural resources, when promoting economic and social development.

Improved Pig Production and Performance in the Tropics | Enem ...

African Journals Online (AJOL)

Pig production can yield relatively rapid rate of economic return on capital due to the ... of production, housing, feeding, health, and product marketing were discussed to enable a prospective pig farmer have a wonderful return on investment.

Fatalities due to methyl alcohol intoxication in Turkey: an 8-year study.

Science.gov (United States)

Yayci, Nesime; Ağritmiş, Hasan; Turla, Ahmet; Koç, Sermet

2003-01-09

The aim of this study is to examine methyl alcohol poisoning cases from the medico-legal point of view. The records of the Morgue Department of Council of the Forensic Medicine were reviewed retrospectively for all methyl alcohol poisonings for the period of 27.10.1992 and 30.05.2001. The victim's age, sex, death year, death place, methyl alcohol blood levels, the source of methyl alcohol, accompanying laboratory results and histopathologic tissue changes were recorded. The number of deaths due to the methyl alcohol poisoning was 271 during that period of time. Two hundred and forty-two of the (89.3%) total 271 methyl alcohol fatalities were men and 29 (10.7%) of were women. The largest age group was 36-40 years old, followed by 41-45. The methyl alcohol blood concentrations ranged widely from 50 to 755 mg for per 100 ml. There were 222 cases (81.9%) with the methyl alcohol blood concentrations over 100 mg/dl. Twenty-nine (10.7%) victims were poisoned through the consumption of cologne and three of them with alcoholic beverage named "Raki". Consumed products were not known in all other cases because of insufficient patient history and data. As a conclusion, regarding the distribution according to years, mortality due to methyl alcohol intoxication in our country have been proceeding on a certain level. In order to decrease the mortality due to methyl alcohol intoxication, some precautions should be developed that could prevent the production and consumption of alcoholic beverages illegally produced.

Technological measures to improve automotive product quality

OpenAIRE

Gladkov, V.; Kruglov, S.

2010-01-01

The paper examines the basic technological measures aimed at improving product quality in automotive industry. While paying due attention to solving organizational and technological problems, including the development of certification systems for production processes, it is also necessary to improve the technical standards of specific technologies, equipment and materials as they largely determine product quality. Special emphasis is given to the importance of improving the production of auto...

Commercialization channels of organic products in Brazil: analysis at the first level of the production chain

Directory of Open Access Journals (Sweden)

Andréa Rossi Scalco

2017-10-01

Full Text Available Abstract Specialized literature on organic production highlights the presence and concentration of retail, especially supermarkets, in the organic enhancement chain. This presents enormous obstacles for the entrance of small farmers in the production of organic products due to administrative barriers, in addition to pressure for lower prices by the supermarket retail network. This paper investigates the commercialization channels of organic production in Brazil. The survey was undertaken in 2013; questionnaires were sent to 900 out of approximately 11.200 farmers producing organic products; 216 answers were received. Analysis showed that approximately 90% of farmers provided for the internal market and 60% of the products were fresh fruits and vegetables. The distribution of organic products in Brazil is highly fragmented at the local, regional and national levels. The presence of supermarkets and intermediaries in the commercialization of fruits and vegetables is relevant, regardless of the size of the farm. There is a great dispersion of channels in the case of small farmers, although supermarkets rank second. However, direct commercialization (farmers markets is the main form of commercialization of the produce. Commercialization triggered by social programs has guaranteed a considerable part of the income on small production units or small farms. It seems that high involvement of retail networks and agents in the agribusiness segment causes low development rates in small agricultural units and in local development due to the latter’s low profit margins.

Pollinator-independent orchid attracts biotic pollinators due the production of lipoidal substances.

Science.gov (United States)

Pansarin, E R; Bergamo, P J; Ferreira-Caliman, M J

2018-03-01

Flowering plants often depend on the attraction of biotic pollinators for sexual reproduction. Consequently, the emergence and maintenance of selected floral attributes related to pollinator attraction and rewarding are driven by pollinator pressure. In this paper we explore the effect of pollinators, rainfall, temperature and air humidity on the reproduction of a Brazilian terrestrial orchid, Cranichis candida based on data of phenology, flower resources, olfactory and visual attraction cues, pollinators and breeding system. The flowers of C. candida are strongly protandrous and pollinated by workers of the social native bee Tetragonisca angustula. The bees collect labellar lipoidal substances (wax scales), which are transported to the nest. The lipoidal substance is composed of sterols, hydrocarbons and terpenes. The last presumably protects the bees and their nests against pathogens and other arthropods. C. candida sets fruits through biotic self- and cross-pollination, and spontaneously due the action of raindrops on flowers. Our results indicate that in C. candida, although rain-mediated spontaneous self-pollination happens, fructification mediated by biotic pollinations also occurs, which may result in fruit set by cross-pollination. A mixed pollination system must result in higher genetic variability when compared to species whose fruits are produced entirely by self-pollination. On the other hand, autogamy is a form of reproductive assurance, and has commonly evolved where pollination services are rare or absent. © 2017 German Society for Plant Sciences and The Royal Botanical Society of the Netherlands.

Quasar production: Topological defect formation due to a phase transition linked with massive neutrinos

International Nuclear Information System (INIS)

Singh, A.

1994-01-01

Recent observations of the space distribution of quasars indicate a very notable peak in space density at a redshift of 2 to 3. It is pointed out in this article that this may be the result of a phase transition which has a critical temperature of roughly a few meV (in the cosmological units h=c=k=1). It is further pointed out that such a phase transition is natural in the context of massive neutrinos. In fact, the neutrino masses required for quasar production and those required to solve the solar neutrino problem by the Mikheyev-Smirnov-Wolfenstein mechanism are consistent with each other

Structural changes in a copper alloy due to helium implantation

International Nuclear Information System (INIS)

Moreno, D.; Eliezer, D.

1996-01-01

The most suitable nuclear fusion reaction for energy production occurs between the two heavy hydrogen isotopes, deuterium and tritium. Structural materials in fusion reactors will be exposed to helium implantation over a broad range of energies. The deformation and partial exfoliation of surface layers due to hydrogen isotopes and helium contribute to the total erosion of the first wall. For this reason, one of the most important criteria in the choice of materials for the first wall of fusion reactors is the material's damage resistance. Recent advances in developing nuclear fusion reactors reveal that efficient heat removal from plasma-facing components is very important. Copper and copper alloys are considered an attractive choice for transporting such a high heat flux without thermal damage as they have high thermal conductivity. In the present study the authors report on the structural changes in a copper alloy, due to the helium implantation on the very near surface area, observed by transmission electron microscopy

Evaluation of environmental damage due to atmospheric pollution caused by power economy

International Nuclear Information System (INIS)

Burneikis, J.; Shtreimikiene, D.

1996-01-01

Methods to evaluate the environmental damage due to atmospheric pollution caused by power economy are presented. The products of burning fossil fuel (CO 2 , SO 2 , NO x and ashes) make the bulk of the pollutants that are being discharged into the atmosphere. To evaluate the damage caused by these pollutants an empirical method is suggested. The direct and analytical methods are used as a basis in collecting data for the empirical evaluation. All the three methods are described and empirical formulas suggested for calculating environmental damage due to burning fossil fuel in thermal power stations. The authors prove the necessity to change the present system of environmental taxes in Lithuania, which are purely symbolic. (author). 8 refs., 9 tabs

Magnetically-enhanced open string pair production

Science.gov (United States)

Lu, J. X.

2017-12-01

We consider the stringy interaction between two parallel stacks of D3 branes placed at a separation. Each stack of D3 branes in a similar fashion carry an electric flux and a magnetic flux with the two sharing no common field strength index. The interaction amplitude has an imaginary part, giving rise to the Schwinger-like pair production of open strings. We find a significantly enhanced rate of this production when the two electric fluxes are almost identical and the brane separation is on the order of string scale. This enhancement will be largest if the two magnetic fluxes are opposite in direction. This novel enhancement results from the interplay of the non-perturbative Schwinger-type pair production due to the electric flux and the stringy tachyon due to the magnetic flux, and may have realistic physical applications.

Uncertainties on decay heat power due to fission product data uncertainties; Incertitudes sur la puissance residuelle dues aux incertitudes sur les donnees de produits de fission

Energy Technology Data Exchange (ETDEWEB)

Rebah, J

1998-08-01

Following a reactor shutdown, after the fission process has completely faded out, a significant quantity of energy known as 'decay heat' continues to be generated in the core. The knowledge with a good precision of the decay heat released in a fuel after reactor shutdown is necessary for: residual heat removal for normal operation or emergency shutdown condition, the design of cooling systems and spent fuel handling. By the summation calculations method, the decay heat is equal to the sum of the energies released by individual fission products. Under taking into account all nuclides that contribute significantly to the total decay heat, the results from summation method are comparable with the measured ones. Without the complete covariance information of nuclear data, the published uncertainty analyses of fission products decay heat summation calculation give underestimated errors through the variance/covariance analysis in consideration of correlation between the basic nuclear data, we calculate in this work the uncertainties on the decay heat associated with the summation calculations. Contribution to the total error of decay heat comes from uncertainties in three terms: fission yields, half-lives and average beta and gamma decay energy. (author)

Poison 1 - a programme for calculation of reactivity transients due to fission product poisoning and its application in continuous determination of xenon and samarium poisoning in reactor KS-150

International Nuclear Information System (INIS)

Rana, S.B.

1973-12-01

The report contains a user's description of the 3-dimensional programme POISON 1 for calculating reactivity transients due to fission-product poisoning during changes of reactor power. The chapter dealing with Xe poisoning contains a description of Xe tables, the method of operational determination of Xe poisoning, use of Xe transients for calibrating control rods and means of shutting down the reactor without being overriden by Xe poisoning. Sm poisoning is determined continuously on the basis of the power diagram of reactor operation. In conclusion a possibility of using the programme in a process computer in combination with self-powered detectors as local power sensors is indicated. (author)

Planning stability in a product recorvery syste

NARCIS (Netherlands)

G. Heisig; M. Fleischmann (Moritz)

2001-01-01

textabstractRecovery of used products is an issue of growing importance due to customer expectations and environmental regulation. As a consequence, companies need to adapt their material management taking into account inbound flows of used products. Corresponding inventory control models have been

Description, Modelling and Design of Production Systems

DEFF Research Database (Denmark)

Jacobsen, Peter; Rudolph, Carsten

1997-01-01

Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...

Internal dosimetric evaluation due to uranium aerosols; Evaluacion dosimetrica interna debido a aerosoles de uranio

Energy Technology Data Exchange (ETDEWEB)

Juan, Garcia Aguilar; Gustavo, Delgado Avila [Instituto Nacional de Investigaciones Nucleares, Salazar (Mexico)

1991-07-01

The present work has like object to carry out the internal dosimetric evaluation to the occupationally exposed personnel, due to the inhalation of aerosols of natural uranium and enriched in the pilot plant of nuclear fuel production of the National Institute of Nuclear Research.

Learning control for riser-slug elimination and production-rate optimization for an offshore oil and gas production process

DEFF Research Database (Denmark)

Pedersen, Simon; Løhndorf, Petar Durdevic; Yang, Zhenyu

2014-01-01

, (ii) maximizing the production rate at the riser of an offshore production platform, by manipulating a topside choke valve through a learning switching model-free PID controller. The results show good steady-state performance, though a long settling time due to the unknown reference for no slugging...

PENGARUH DUE PROFESSIONAL CARE TERHADAP KUALITAS AUDIT PADA KANTOR AKUNTAN PUBLIK DI KOTA BANDUNG

Directory of Open Access Journals (Sweden)

Tb. Aman Faturachman

2015-04-01

Full Text Available The purpose of this study is to know how the influence of professional care due to audit quality. Case study at Public Accounting Firm in Bandung City. Hypothesis in this research is due professional care have positive effect to audit quality. The research method used in this research is associative method. The population in this study were junior auditor and senior auditor who worked at Public Accounting Firm in Bandung City. Sampling using convenience sampling. Data used primary data collected from questionnaire results. In analyzing the data, this study uses a statistical analysis called product moment correlation. From the test results obtained a positive influence of 0.569 and the coefficient of determination of 32.37%. These results indicate that due professional care has an effect on audit quality of 32.37%.

The cost of productivity losses associated with allergic rhinitis.

Science.gov (United States)

Crystal-Peters, J; Crown, W H; Goetzel, R Z; Schutt, D C

2000-03-01

To measure the cost of absenteeism and reduced productivity associated with allergic rhinitis. The National Health Interview Survey (NHIS) was used to obtain information on days lost from work and lost productivity due to allergic rhinitis. Wage estimates for occupations obtained from the Bureau of Labor Statistics (BLS) were used to calculate the costs. Productivity losses associated with a diagnosis of allergic rhinitis in the 1995 NHIS were estimated to be $601 million. When additional survey information on the use of sedating over-the-counter (OTC) allergy medications, as well as workers' self-assessments of their reduction in at-work productivity due to allergic rhinitis, were considered, the estimated productivity loss increased dramatically. At-work productivity losses were estimated to range from $2.4 billion to $4.6 billion. Despite the inherent difficulty of measuring productivity losses, our lowest estimate is several times higher than previous estimates of the indirect medical costs associated with allergic rhinitis treatment. The most significant productivity losses resulted not from absenteeism but from reduced at-work productivity associated with the use of sedating OTC antihistamines.

Bioreactors for lignocellulose conversion into fermentable sugars for production of high added value products

OpenAIRE

Liguori, Rossana; Ventorino, Valeria; Pepe, Olimpia; Faraco, Vincenza

2015-01-01

Lignocellulosic biomasses derived from dedicated crops and agro-industrial residual materials are promising renewable resources for the production of fuels and other added value bioproducts. Due to the tolerance to a wide range of environments, the dedicated crops can be cultivated on marginal lands, avoiding conflict with food production and having beneficial effects on the environment. Besides, the agro-industrial residual materials represent an abundant, available, and cheap source of biop...

Biodiesel production technologies: review

Directory of Open Access Journals (Sweden)

Shemelis Nigatu Gebremariam

2017-05-01

Full Text Available Biodiesel is a fuel with various benefits over the conventional diesel fuel. It is derived from renewable resources, it has less emission to environment, it is biodegradable so has very limited toxicity and above all its production can be decentralized so that it could have a potential in helping rural economies. However, there are also some worth mentioning challenges associated with production of biodiesel. Among them repeatedly mentioned are the cost of feedstock and the choice of convenient technology for efficient production of the fuel from diverse feedstock types. There are four main routes by which raw vegetable oil and/or animal fat can be made suitable for use as substituent fuel in diesel engines without modification. These are direct use or blending of oils, micro-emulsion, thermal cracking or pyrolysis and transesterification reaction. Due to the quality of the fuel produced, the transesterification method is the most preferred way to produce biodiesel from diverse feedstock types. Through this method, oils and fats (triglycerides are converted to their alkyl esters with reduced viscosity to near diesel fuel levels. There are different techniques to carry out transesterification reaction for biodiesel production. Each technique has its own advantages and disadvantages as well as its own specifically convenient feedstock character. There are also some very important reaction conditions to be given due attention in each of this techniques for efficient production of biodiesel, such as molar ratio of alcohol to oil, type and amount of catalyst, reaction temperature, reaction time, reaction medium, type and relative amount of solvents, among others. This review is meant to investigate the main transesterification techniques for biodiesel production in terms of their choice of feedstock character as well as their determinately required reaction conditions for efficient biodiesel production, so that to give an overview on their advantages

14C specific activity of farm products and marine products collected from the Rokkasho area in Aomori prefecture

International Nuclear Information System (INIS)

Muranaka, Takeshi; Honda, Kazuya

1996-01-01

We investigated 14 C specific activity of farm products and marine products which were collected from the Rokkasho area in Aomori prefecture from 1988 to 1990. The measured 14 C specific activity of farm products was almost equal to one another with the averaged 14 C specific activity of 0.261 [Bq/g·C]. On the other hand, 14 C specific activity of marine products was slightly lower than those of farm products. Especially that of squid was the lowest among studied marine products. This may be due to the low 14 C specific activity of the sea water surrounding squid. (author)

Economics of Russian oil production

International Nuclear Information System (INIS)

Gubenko, I.

1993-01-01

The main technical indicators of oil production in Russia are presented from the year 1988, when the current decline in oil production started. In 1992, only 9 new oil deposits were put into production, and average well productivity dropped to 12.4 tonnes/d. The number of idle wells reached 31,934 as compared to 8,714 in 1988. The share of low productivity deposits in 1993 was 49.7%. In the first five months of 1993, the number of new wells put into operation failed to offset the shutdown of old wells. Although the number of workovers grew by 32%, this work was insufficient to stabilize oil production. The decline in production is due to the general state of economic stability and endless reorganizations in the economy, and to the lack of sufficient investment in the industry. Oil-producing enterprises have lacked funds due to systematic and growing indebtedness of buyers of crude. This overdue indebtedness reached 393 billion rubles by the beginning of 1993. Although domestic oil prices increased sharply in 1991-92, the volume of production in real terms has dropped by nearly a third. Oil is sold at different prices to different categories of buyers. Prices include expenses, profit from which a 32% profits tax is paid, excise taxes, and payments to a centralized price-regulation fund. From the industry point of view, certain reforms are necessary to reconstruct and develop the industry. These include ensuring payments to oil producers, gradual transfer of Russian prices to world levels, lowering taxes, and adoption and refinement of a law on oil. 1 fig., 7 tabs

SU-E-T-231: Measurements of Gold Nanoparticle-Mediated Proton Dose Enhancement Due to Particle-Induced X-Ray Emission and Activation Products Using Radiochromic Films and CdTe Detector

International Nuclear Information System (INIS)

Cho, J; Cho, S; Manohar, N; Krishnan, S

2014-01-01

Purpose: There have been several reports of enhanced cell-killing and tumor regression when tumor cells and mouse tumors were loaded with gold nanoparticles (GNPs) prior to proton irradiation. While particle-induced xray emission (PIXE), Auger electrons, secondary electrons, free radicals, and biological effects have been suggested as potential mechanisms responsible for the observed GNP-mediated dose enhancement/radiosensitization, there is a lack of quantitative analysis regarding the contribution from each mechanism. Here, we report our experimental effort to quantify some of these effects. Methods: 5-cm-long cylindrical plastic vials were filled with 1.8 mL of either water or water mixed with cylindrical GNPs at the same gold concentration (0.3 mg Au/g) as used in previous animal studies. A piece of EBT2 radiochromic film (30-µm active-layer sandwiched between 80/175-µm outer-layers) was inserted along the long axis of each vial and used to measure dose enhancement due to PIXE from GNPs. Vials were placed at center-of-modulation (COM) and 3-cm up-/down-stream from COM and irradiated with 5 different doses (2–10 Gy) using 10-cm-SOBP 160-MeV protons. After irradiation, films were cleaned and read to determine the delivered dose. A vial containing spherical GNPs (20 mg Au/g) was also irradiated, and gamma-rays from activation products were measured using a cadmium-telluride (CdTe) detector. Results: Film measurements showed no significant dose enhancement beyond the experimental uncertainty (∼2%). There was a detectable activation product from GNPs, but it appeared to contribute to dose enhancement minimally (<0.01%). Conclusion: Considering the composition of EBT2 film, it can be inferred that gold characteristic x-rays from PIXE and their secondary electrons make insignificant contribution to dose enhancement. The current investigation also suggests negligible dose enhancement due to activation products. Thus, previously-reported GNP-mediated proton dose

Simulation Study of a Vehicle Production Line for Productivity Improvement

Directory of Open Access Journals (Sweden)

M.F.F. Ab Rashid

2015-06-01

Full Text Available This paper presents the study of a motorcycle frame production line in a particular company in Malaysia. Due to the high demand, the company needs to increase its production by at least 12% compared with current output. In order to improve productivity, the production-floor data was collected and simulated using the discrete event simulation approach. Later, a number of suggestions for improvement were simulated to identify the effect of the suggestions on productivity. In addition, cost analysis was also undertaken to identify the profit margin for a particular period of time for each suggestion. Simulation results indicate that there are three suggestions that are able to fulfill the 12% volume increment. In the short term, the suggestion to hire an assistant line leader will give instant effect to the profit. Meanwhile, for the medium term, Poka-yoke will give higher profit compared with the others, while in the long term, SOP (standard operating procedure implementation will yield a better profit margin. In future, the simulation of a dynamic demand model for this product is suggested to cope with new trends in the market.

Microbial Metabolite Production for Accelerated Metal and Radionuclide Bioremediation (Microbial Metabolite Production Report)

International Nuclear Information System (INIS)

TURICK, CHARLES

2004-01-01

Biogeochemical activity is an ongoing and dynamic process due to bacterial activity in the subsurface. Bacteria contribute significantly to biotransformation of metals and radionuclides. As basic science reveals more information about specific mechanisms of bacterial-metal reduction, an even greater contribution of bacteria to biogeochemical activities is realized. An understanding and application of the mechanisms of metal and radionuclide reduction offers tremendous potential for development into bioremedial processes and technologies. Most bacteria are capable of biogeochemical transformation as a result of meeting nutrient requirements. These assimilatory mechanisms for metals transformation include production of small molecules that serve as electron shuttles for metal reduction. This contribution to biogeochemistry is small however due to only trace requirements for minerals by bacteria. Dissimilatory metal reducing bacteria (DMRB) reduce oxidized metals and insoluble mineral oxides as a means for biological energy production during growth. These types of bacteria offer considerable potential for bioremediation of environments contaminated with toxic metals and radionuclides because of the relatively large amount of metal biotransformation they require for growth. One of the mechanisms employed by some DMRB for electron transfer to insoluble metal oxides is melanin production. The electrochemical properties of melanin provide this polymeric, humic-type compound with electron shuttling properties. Melanin, specifically, pyomelanin, increases the rate and degree of metal reduction in DMRB as a function of pyomelanin concentration. Due to its electron shuttling behavior, only low femtogram quantities per cell are required to significantly increase metal reduction capacity of DMRB. Melanin production is not limited to DMRB. In fact melanin is one of the most common pigments produced by biological systems. Numerous soil microorganisms produce melanin, contributing

Long term population dose due to radon (Rn-222) released from uranium mill tailings

International Nuclear Information System (INIS)

Chambers, D.B.; Lower, L.M.; Stager, R.H.

2001-01-01

The results of a study undertaken by the European Commission on the external costs (environmental and social) of various energy production systems is likely to be influential in determining how the European Union will develop its energy supply systems. The estimated costs for nuclear power from the study will be based on the findings of the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR), with the costs being dominated by the estimated long term (10,000 y) population doses due to radon (Rn-222) released from mill tailings. UNSCEAR developed a central estimate of 150 person-Sv per GW y and a range of 1 to 1,000 person-Sv per GW y. However, the generic data available to and being used by UNSCEAR are dated and are not appropriate for the current and planned future conditions in the uranium production industry, with the result that the estimated external costs of nuclear power (specifically, the doses due to radon emitted from mill tailings) are overestimated. The Uranium Institute sponsored a study to estimate long term population doses based on the most recent 1993 UNSCEAR methodology, but using data that would be more appropriate to the current major uranium production facilities. Site-specific information obtained from the owners/operators and the Uranium Institute included: present and proposed tailings management plans; tailings volumes and areas; ore grades and reserves; measurements and estimates of radon emission rates; and population densities. Tailings at closed facilities that no longer contribute to uranium production were not evaluated since it was assumed that these radon sources need not be considered in evaluating the external costs of current and future nuclear power production. Based on the same approach as UNSCEAR, but using a more sophisticated air dispersion model, and more site-specific data relative to existing sites and proposed tailings management practices, radon emission rates and population densities (that

Producing chicken eggs containing isoflavone as functional food due to feeding effect of soy sauce by-product

Science.gov (United States)

Mahfudz, L. D.; Sarjana, T. A.; Muryani, R.; Suthama, N.

2018-01-01

The present study was aimed to verify the impact of feeding soy sauce by-product in producing isoflavone-enriched chicken eggs as functional food. Experiment used 200 laying hens of 80-week old with average body weight of 1,932.75±189.50 g. Experimental diets were formulated using yellow corn, rice bran, soybean meal, fish meal, meat bone meal, poultry meal, premix, CaCO3, and soy sauce by-product (SSBP). A completely randomized design with 4 treatments and 5 replication (10 birds each), was assigned in this experiment. Inclusion levels of SSBP were the treatments, namely, none (T0), 10 (T1), 12.5 (T2), and 15.0% (T3). Parameters observed were colour, index, and weight of egg yolk, and isoflavone content. Analysis of variance was applied and continued to Duncan test at 5% probability. Results indicated that yolk colour index and weight were not affected by the treatments, but isoflavone content was significantly (P<0.05) increased by feeding SSBP. Egg yolk isoflavone in T2 (0.41 mg/g) and T3 (0.47 mg/g) were higher than those in T0 (0.31 mg/g) and T1 (0.35 mg/g). In conclusion, dietary inclusion of soy sauce by-product at higher level (12.5 and 15.0%) can produce isoflavone-enriched eggs as functional food.

Chitosan nanofiber scaffold improves bone healing via stimulating trabecular bone production due to upregulation of the Runx2/osteocalcin/alkaline phosphatase signaling pathway

Science.gov (United States)

Ho, Ming-Hua; Yao, Chih-Jung; Liao, Mei-Hsiu; Lin, Pei-I; Liu, Shing-Hwa; Chen, Ruei-Ming

2015-01-01

Osteoblasts play critical roles in bone formation. Our previous study showed that chitosan nanofibers can stimulate osteoblast proliferation and maturation. This translational study used an animal model of bone defects to evaluate the effects of chitosan nanofiber scaffolds on bone healing and the possible mechanisms. In this study, we produced uniform chitosan nanofibers with fiber diameters of approximately 200 nm. A bone defect was surgically created in the proximal femurs of male C57LB/6 mice, and then the left femur was implanted with chitosan nanofiber scaffolds for 21 days and compared with the right femur, which served as a control. Histological analyses revealed that implantation of chitosan nanofiber scaffolds did not lead to hepatotoxicity or nephrotoxicity. Instead, imaging analyses by X-ray transmission and microcomputed tomography showed that implantation of chitosan nanofiber scaffolds improved bone healing compared with the control group. In parallel, microcomputed tomography and bone histomorphometric assays further demonstrated augmentation of the production of new trabecular bone in the chitosan nanofiber-treated group. Furthermore, implantation of chitosan nanofiber scaffolds led to a significant increase in the trabecular bone thickness but a reduction in the trabecular parameter factor. As to the mechanisms, analysis by confocal microscopy showed that implantation of chitosan nanofiber scaffolds increased levels of Runt-related transcription factor 2 (Runx2), a key transcription factor that regulates osteogenesis, in the bone defect sites. Successively, amounts of alkaline phosphatase and osteocalcin, two typical biomarkers that can simulate bone maturation, were augmented following implantation of chitosan nanofiber scaffolds. Taken together, this translational study showed a beneficial effect of chitosan nanofiber scaffolds on bone healing through stimulating trabecular bone production due to upregulation of Runx2-mediated alkaline

Operational costs induced by fluctuating wind power production in Germany and Scandinavia

Energy Technology Data Exchange (ETDEWEB)

Meibom, P. [Risoe National Lab., DTU, System Analysis Dept., Roskilde (Denmark); Weber, C. [Univ. Duisburg-Essen, Chai og Energy Management (Germany); Barth, R.; Brand, H. [Univ. of Stuttgart, Inst. of Energy Economics and the Rational Use of Energy (Germany)

2007-05-15

Adding wind power generation in a power system changes the operational patterns of the existing units due to the variability and unpredictability of wind power production. For large amounts of wind power production the expectation is that the operational costs of the other power plants will increase due to more operation time in part-load and more start-ups. The change in operational costs induced by the wind power production can only be calculated by comparing the operational costs in two power system configurations: with wind power production and with alternative production having properties like conventional production, i.e. being predictable and less variable. The choice of the characteristics of the alternative production is not straight forward and will therefore influence the operational costs induced by wind power production. This paper presents a method for calculating the change in operational costs due to wind power production using a stochastic optimization model covering the power systems in Germany and the Nordic countries. Two cases of alternative production are used to calculate the change in operational costs namely perfectly predictable wind power production enabling calculation of the costs connected to unpredictability, and constant wind power production enabling calculation of the operational costs connected to variability of wind power production. A 2010 case with three different wind power production penetration levels is analysed in the paper. (au)

Total gastrectomy due to ferric chloride intoxication.

Science.gov (United States)

Menéndez, A Mesut; Abramson, Leonardo; Vera, Raúl A; Duza, Guillermo E; Palermo, Mariano

2015-09-01

The ferric chloride intoxication is frequently caused by accident. Its toxicity is generally underrated, which can lead to fatal evolution or irreversible consequences. In this case, the caustic condition of the substance is related to the toxic properties of iron. A 36-year-old male patient arrives by ambulance indicating sensory deterioration. He presents erosive injuries in the buccal cavity and in the oropharynx, brownish teeth and metabolic acidosis. Toxicology tests and ferritin blood dosage are requested, which show a result from 1400 mg/dl. The symptoms are interpreted as acute iron intoxication. Due to the unfavorable evolution of his condition, an abdominal and pelvic CT scan are performed, which show extensive pneumoperitoneum and free fluid in the abdominal cavity. An exploratory laparotomy, a total gastrectomy with esophagostomy and feeding jejunostomy, washing and drainage due to perforated gastric necrosis caused by caustic ingestion are performed. In our country, there is a high rate of intoxication caused by iron compounds, although it is not statistically measured. Nevertheless, the ferric chloride intoxication is extremely infrequent. The ingestion of this product leads to complications, which are associated with the iron concentration and its condition as a caustic agent. The surgical indications in the presence of intoxication caused by iron compounds are: stomach evacuation of iron, gastric necrosis, perforation or peritonitis and stenosis. Early or prophylactic gastrectomy is contraindicated. However, if complications that require immediate surgical intervention arise, there should be no hesitation and the corresponding procedure should be performed.

Production of Genetically Improved Organic Nile Tilapia

NARCIS (Netherlands)

Charo, H.; Komen, J.; Bovenhuis, H.; Rezk, M.A.; Ponzoni, R.W.

2008-01-01

Demand for organic products for human consumption has been on the increase due to the belief that organic products are safer and healthier to the consumer and the environment. In developing countries, Nile tilapia (Oreochromis niloticus) is usually grown in low-input organically fed ponds with

Severe oral infection due to Lactobacillus rhamnosus during induction chemotherapy for acute myeloid leukemia.

Science.gov (United States)

Ishihara, Yuko; Kanda, Junya; Tanaka, Kaori; Nakano, Hirofumi; Ugai, Tomotaka; Wada, Hidenori; Yamasaki, Ryoko; Kawamura, Koji; Sakamoto, Kana; Ashizawa, Masahiro; Sato, Miki; Terasako-Saito, Kiriko; Kimura, Shun-Ichi; Kikuchi, Misato; Nakasone, Hideki; Yamazaki, Rie; Kako, Shinichi; Nishida, Junji; Watanabe, Kunitomo; Kanda, Yoshinobu

2014-12-01

We report a case of severe oral infection with a high fever due to Lactobacillus rhamnosus during induction chemotherapy for acute myeloid leukemia. The patient did not improve on treatment with meropenem, clindamycin, or vancomycin until neutrophil recovery. Since L. rhamnosus GG is used in dairy products, and the patient ingested dairy products daily before starting chemotherapy, we suspected an association between the ingestion of dairy products and the development of infection. Pulsed-field gel electrophoresis using two different restriction enzymes showed that the strain isolated from the patient was identical to the L. rhamnosus GG strain isolated from dairy products and ATCC #53103. This was confirmed by a PCR assay with species-specific L. rhamnosus GG primers. Since Lactobacillus infection, particularly L. rhamnosus infection, can be fatal in immunocompromised hosts, we should consider Lactobacillus as a causative organism when Gram-positive rods are detected during treatment with broad-spectrum antibiotics and vancomycin. The causal association between the ingestion of dairy products containing Lactobacillus and Lactobacillus infection in immunocompromised hosts warrants further study.

Production loss due to new subclinical mastitis in Dutch dairy cows estimated iwth a test-day model

NARCIS (Netherlands)

Halasa, T.; Nielen, M.; Roos, de S.; Hoorne, van R.; Jong, de G.; Lam, T.J.G.M.; Werven, van T.; Hogeveen, H.

2009-01-01

Milk, fat, and protein loss due to a new subclinical mastitis case may be economically important, and the objective of this study was to estimate this loss. The loss was estimated based on test-day (TD) cow records collected over a 1-yr period from 400 randomly selected Dutch dairy herds. After

An outbreak of cutaneous infection due to Mycobacterium abscessus associated to mesotherapy.

Science.gov (United States)

Galmés-Truyols, Antònia; Giménez-Duran, Jaume; Bosch-Isabel, Catalina; Nicolau-Riutort, Antonio; Vanrell-Berga, Joana; Portell-Arbona, Margarita; Seguí-Prat, Bartolomé; Gumá-Torá, Mercedes; Martí-Alomar, Isabel; Rojo-Arias, María Ángeles; Ruiz-Veramendi, Mikel

2011-01-01

In February 2009 an outbreak of subcutaneous abscesses due to Mycobacterium abscessus was detected in Spain which affected healthy women who had undergone mesotherapy procedures in an aesthetic clinic. Epidemiological research, health inspection and microbiological studies were conducted. The patients were given antibiotic treatment (according to susceptibility testing) with clarithromycin, and in some cases, combined with amikacin. Seventeen out of 77 patients treated in the clinic were affected. The products used for the injections were homeopathic drugs in multi-dose vials. The environmental samples were negative. The sterile injection equipment and the clinical procedures were evaluated as correct. The storage conditions for the drugs were also correct, and all the samples tested negative for Mycobacteria. However Paenibacillus provencensis was isolated from samples of unused multi-dose vials and the withdrawal of the product from distribution was ordered. Deficiencies were detected in the sterile products process of at the homeopathic drug factory, so the production line was suspended. The results of environmental investigation suggest the most likely cause of the outbreak could have been the contamination of the products in the factory, although there was no laboratory confirmation. The widespread use of homeopathic products in invasive procedures requires extreme control during the manufacturing, handling and packaging process. It is important to consider mesotherapy and parenteral use of homeopathic medicines as potential sources of infection and therefore the same precautions in the procedures and quality assurance of products should be applied as with any other drug or medical activity. Copyright © 2010 Elsevier España, S.L. All rights reserved.

Lactose hydrolysis and milk powder production: technological aspects

Directory of Open Access Journals (Sweden)

Jansen Kelis Ferreira Torres

2017-06-01

Full Text Available The food industry has the challenge and the opportunity to develop new products with reduced or low lactose content in order to meet the needs of a growing mass of people with lactose intolerance. The manufacture of spray dried products with hydrolyzed lactose is extremely challenging. These products are highly hygroscopic, which influence the productivity and conservation of the powders, not to mention the undesirable and inevitable technological problem of constant clogging of drying chambers. The aim of this study was to evaluate the effect of different levels (0%, 25%, 50%, 75% and > 99% of enzymatic lactose hydrolysis on the production and storage of whole milk powder. The samples were processed in a pilot plant and characterized in relation to their composition analysis; to their degree of hydrolysis of lactose; and to their sorption isotherms. The results indicated the hydrolysis of lactose may affect the milk powder production due to a higher extent of powder adhesion within the spray dryer chambers and due to a higher tendency to absorb water during storage.

Resummation for supersymmetric particle production at hadron colliders

Energy Technology Data Exchange (ETDEWEB)

Brensing, Silja Christine

2011-05-10

The search for supersymmetry is among the most important tasks at current and future colliders. Especially the production of coloured supersymmetric particles would occur copiously in hadronic collisions. Since these production processes are of high relevance for experimental searches accurate theoretical predictions are needed. Higher-order corrections in quantum chromodynamics (QCD) to these processes are dominated by large logarithmic terms due to the emission of soft gluons from initial-state and final-state particles. A systematic treatment of these logarithms to all orders in perturbation theory is provided by resummation methods. We perform the resummation of soft gluons at next-to-leading-logarithmic (NLL) accuracy for all possible production processes in the framework of the Minimal Supersymmetric Standard Model. In particular we consider pair production processes of mass-degenerate light-flavour squarks and gluinos as well as the pair production of top squarks and non-mass-degenerate bottom squarks. We present analytical results for all considered processes including the soft anomalous dimensions. Moreover numerical predictions for total cross sections and transverse-momentum distributions for both the Large Hadron Collider (LHC) and the Tevatron are presented. We provide an estimate of the theoretical uncertainty due to scale variation and the parton distribution functions. The inclusion of NLL corrections leads to a considerable reduction of the theoretical uncertainty due to scale variation and to an enhancement of the next-to-leading order (NLO) cross section predictions. The size of the soft-gluon corrections and the reduction in the scale uncertainty are most significant for processes involving gluino production. At the LHC, where the sensitivity to squark and gluino masses ranges up to 3 TeV, the corrections due to NLL resummation over and above the NLO predictions can be as high as 35 % in the case of gluino-pair production, whereas at the

Climate and productivity

International Nuclear Information System (INIS)

Singh, T.

1991-01-01

Agriculture and forestry, the major land-users in the Prairie provinces, will be greatly affected by shifts in site factors due to global climatic change. Forests are especially vulnerable to climate change because of the long-term nature of forest crops. According to the Goddard Institute for Space Studies (GISS) and General Fluid Dynamics Laboratory (GFDL) general circulation models (GCMs), greenhouse warming will push the southern limit for boreal forests northward by 470-920 km and 250-900 km, respectively. Forests in or near the transition zone will experience major impacts in productivity due to physiological stresses occurring in the ecotones. Enhanced degree day scenarios suggest that the climate will be suitable for grassland over much of the present boreal forest. Potential biomass productivity increases of up to 50% are possible, or could decrease from present levels if higher precipitation projected by the GCMs does not occur. Recommendations for mitigative action are presented for global warming, forests, water, wildlife and fisheries, national parks, and agriculture. Research on environmental impacts, and economic instruments for use in resource management are suggested. 15 refs

Spatial decoupling of agricultural production and consumption: quantifying dependences of countries on food imports due to domestic land and water constraints

International Nuclear Information System (INIS)

Fader, Marianela; Gerten, Dieter; Lucht, Wolfgang; Krause, Michael; Cramer, Wolfgang

2013-01-01

In our globalizing world, the geographical locations of food production and consumption are becoming increasingly disconnected, which increases reliance on external resources and their trade. We quantified to what extent water and land constraints limit countries’ capacities, at present and by 2050, to produce on their own territory the crop products that they currently import from other countries. Scenarios of increased crop productivity and water use, cropland expansion (excluding areas prioritized for other uses) and population change are accounted for. We found that currently 16% of the world population use the opportunities of international trade to cover their demand for agricultural products. Population change may strongly increase the number of people depending on ex situ land and water resources up to about 5.2 billion (51% of world population) in the SRES A2r scenario. International trade will thus have to intensify if population growth is not accompanied by dietary change towards less resource-intensive products, by cropland expansion, or by productivity improvements, mainly in Africa and the Middle East. Up to 1.3 billion people may be at risk of food insecurity in 2050 in present low-income economies (mainly in Africa), if their economic development does not allow them to afford productivity increases, cropland expansion and/or imports from other countries. (letter)

Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

DEFF Research Database (Denmark)

Schipull Kauschen, Jan

2012-01-01

extension to the concept of IPDs discussed. Due to extended product responsibility, the concept of PSSs will offer new possibilities of planning and pre-defining life cycles of IPDs more precisely than for regular building components. Reducing or eliminating point-of-sales will induce producers to optimize...

Radioactivity in Dutch consumer products

CERN Document Server

Janssen, M P M

2002-01-01

This study took place within the framework of a general update of the average radiation dose for the Dutch population. It focuses on consumer products in which radionuclides have been intentionally incorporated and on radiation-emitting devices that can be supplied to members of the public without special surveillance. Eleven consumer products were studied in more detail. The radiation from these products determined 90% of the total collective dose due to consumer products in the Netherlands in 1988. Individual and collective doses are presented here for each product. The total collective dose has decreased from 130 personSv in 1988 to 4.6 personSv at present. This reduction was attributed to: a decrease in the number of radioactive products (gas mantles), lower estimates of the number of radioactive products present in the Netherlands thanks to new information (camera lenses, smoke detectors containing Ra-226), replacement of radioactive by non-radioactive products (gas mantles, dental protheses), and a lowe...

Initial stresses in two-layer metal domes due to imperfections of their production and assemblage

Directory of Open Access Journals (Sweden)

Lebed Evgeniy Vasil’evich

2015-04-01

Full Text Available The process of construction of two-layer metal domes is analyzed to illustrate the causes of initial stresses in the bars of their frames. It has been noticed that it is impossible to build such structures with ideal geometric parameters because of imperfections caused by objective reasons. These imperfections cause difficulties in the process of connection of the elements in the joints. The paper demonstrates the necessity of fitting operations during assemblage that involve force fitting and yield initial stresses due to imperfections. The authors propose a special method of computer modeling of enforced elimination of possible imperfections caused by assemblage process and further confirm the method by an analysis of a concrete metal dome.

Defect production and formation of helium-vacancy clusters due to cascades in α-iron

International Nuclear Information System (INIS)

Yang, L.; Zu, X.T.; Xiao, H.Y.; Gao, F.; Heinisch, H.L.; Kurtz, R.J.

2007-01-01

Displacement cascades are simulated by molecular dynamics methods in α-Fe containing different concentrations of substitutional He atoms. Primary knock-on atom (PKA) energies, E p , from 0.5 to 5 keV are considered at the irradiation temperature of 100 K. The concentration of He in Fe varies from 1 to 5 at%, and the results are compared with the simulations performed in pure α-Fe. We find that the total number of point defects increases with increasing He concentration. The present studies reveal the formation and the configurations of He-vacancy clusters in the cascades of α-Fe. Furthermore, the production efficiency of He-vacancy clusters increases with increasing He concentration and PKA energy. The nucleation mechanisms of He-vacancy clusters in displacement cascades are discussed in detail

Institutionalizing environmental due diligence as part of the organization's culture: The Suncor Oil Sands Group experience

International Nuclear Information System (INIS)

Allen, R.; Klym, D.

1992-01-01

The Suncor Oil Sands Group produces ca 22 million bbl/y of synthetic crude oil from oil sands in northern Alberta. Initiatives taken by the Group to install environmental due diligence as an integral part of Suncor culture are reviewed. Environmental due diligence means taking all reasonable care to safeguard the environment. To practice environmental due diligence, the organization and its members must have an environmental consciousness that can be observed, measured, and monitored through daily practices. In the period from startup of the oil sands plant in 1967 to the mid-1970s, Suncor culture could be described as research oriented, oriented toward examination of the viability of extracting oil from the oil sands and the development of new extraction processes. Management then moved toward a more production-based culture, in which environmental issues were sometimes perceived to be in conflict with production goals. External factors toward the end of the 1980s created a culture shift to an integration of production culture with social entities including environmental consciousness. A corporate push toward a new environmental culture was first concretized when the management's Health and Safety Policy was changed in 1990 to the Health, Safety and Environment Policy. A new Environmental Diligence Program was implemented in three phases, including planning, development of a comprehensive environmental management system, and implementation. Installation of the Program in the first phase is described, focusing on employee and management training, and results of the installation process are presented. Modifications of Suncor's loss control management program to integrate with the environmental diligence program are also noted. 2 refs

Challenges in Enzymatic Route of Mannitol Production

OpenAIRE

Bhatt, Sheelendra Mangal; Mohan, Anand; Srivastava, Suresh Kumar

2012-01-01

Mannitol is an important biochemical often used as medicine and in food sector, yet its biotechnological is not preffered in Industry for large scale production, which may be due to the multistep mechanism involved in hydrogenation and reduction. This paper is a comparative preview covering present chemical and biotechnological approaches existing today for mannitol production at industrial scale. Biotechnological routes are suitable for adaptation at industrial level for mannitol production,...

Zambian charcoal production

International Nuclear Information System (INIS)

Chidumayo, E.N.

1993-01-01

The recovery of miombo woodlands following clearance for woodfuel is being monitored at four sites in central Zambia. Charcoal production removes 50% of the total woody biomass and the woodland regenerates from a pool of stunted old seedlings and stumps of cut trees. Productivity is correlated to tree density before felling. Clearing of successive regrowth miombo does not appear to affect productivity. Annual wood biomass increment in unmanaged regrowth miombo is estimated at 2-3 t/ha pa of which about 1.1 t is cord wood suitable for charcoal production. However, the charcoal spots within the deforested area are severely impacted by the carbonization process which destroys soil structure, seedlings and root stocks. Woodland regeneration on such spots is protracted. Fortunately, charcoal spots only cover 2-3% of the deforested area. The concern about land degradation due to deforestation caused by woodfuel harvesting for urban charcoal in the miombo woodland region of central and southern Africa is not supported by the results of this study. (author)

Diplopia due to Dacryops

Directory of Open Access Journals (Sweden)

Rahmi Duman

2013-01-01

Full Text Available Dacryops is a lacrimal ductal cyst. It is known that it can cause globe displacement, motility restriction, and proptosis because of the mass effect. Diplopia due to dacryops has not been reported previously. Here, we present a 57-year-old man with binocular horizontal diplopia that occurred during left direction gaze due to dacryops.

Irradiation of Northwest agricultural products

International Nuclear Information System (INIS)

Eakin, D.E.; Tingey, G.L.; Anderson, D.B.; Hungate, F.P.

1985-01-01

Irradiation of food for disinfestation and preservation is increasing in importance because of increasing resrictions on various chemical treatments. Irradiation treatment is of particular interest in the Northwest because of a growing supply of agricultural products and the need to develop new export markets. Several products have, or could potentially have, significant export markets if stringent insect control procedures are developed and followed. Due to the recognized potential benefits of irradiation, Pacific Northwest Laboratory (PNL) is conducting this program to evaluate the benefits of using irradiation on Northwest agricultural products under the US Department of Energy (DOE) Defense Byproducts Production and Utilization Program. Commodities currently included in the program are cherries, apples, asparagus, spices, hay, and hides

Irradiation of Northwest agricultural products

International Nuclear Information System (INIS)

Eakin, D.E.; Tingey, G.L.

1985-02-01

Irradiation of food for disinfestation and preservation is increasing in importance because of increasing restrictions on various chemical treatments. Irradiation treatment is of particular interest in the Northwest because of a growing supply of agricultural products and the need to develop new export markets. Several products have, or could potentially have, significant export markets if stringent insect control procedures are developed and followed. Due to the recognized potential benefits of irradiation, Pacific Northwest Laboratory (PNL) is conducting this program to evaluate the benefits of using irradiation on Northwest agricultural products under the US Department of Energy (DOE) Defense Byproducts Production and Utilization Program. Commodities currently included in the program are cherries, apples, asparagus, spices, hay, and hides

Heavy particle production at the SSC

International Nuclear Information System (INIS)

Brodsky, S.J.; Haber, H.E.; Gunion, J.F.

1984-03-01

Predictions for the production of heavy quarks, supersymmetric particles, and other colored systems at high energy due to intrinsic twist-six components in the proton wavefunction are given. We also suggest the possibility of using asymmetric collision energies (e.g., via intersecting rings at the SSC) in order to facilitate the study of forward and diffractive particle production processes. 9 references

PERVAPORATION MEMBRANE SYSTEMS FOR VOLATILE FERMENTATION PRODUCT RECOVERY AND DEHYDRATION

Science.gov (United States)

The economics of fermentative production of fuels and commodity chemicals can be a strong function of the efficiency with which the fermentation products are removed from the biological media. Due to growth inhibition by some fermentation products, including ethanol, concentrati...

Organic Phase Change Nanoparticles for in-Product Labeling of Agrochemicals.

Science.gov (United States)

Wang, Miao; Duong, Binh; Su, Ming

2015-10-28

There is an urgent need to develop in-product covert barcodes for anti-counterfeiting of agrochemicals. This paper reports a new organic nanoparticle-based in-product barcode system, in which a panel of organic phase change nanoparticles is added as a barcode into in a variety of chemicals (herein agrochemicals). The barcode is readout by detecting melting peaks of organic nanoparticles using differential scanning calorimetry. This method has high labeling capacity due to small sizes of nanoparticles, sharp melting peaks, and large scan range of thermal analysis. The in-product barcode can be effectively used to protect agrochemical products from being counterfeited due to its large coding capacity, technical readiness, covertness, and robustness.

Natural gas and production of electricity

International Nuclear Information System (INIS)

Defago, E.

2005-01-01

The forthcoming power supply shortage in Switzerland due to increasing consumption is discussed, as are the possibilities for securing the future supply. Today, the main sources are hydroelectric (roughly 55 %) and nuclear (40 %) power. The share of electricity from natural gas amounts to only 1.4 %. The possibilities of further economic production of hydropower are practically exhausted. Therefore, further electric power has to be either imported or generated from other energy sources (renewable, nuclear, fossil) in the country itself. Due to the low acceptance of nuclear energy and the limited potential of renewable energy sources, natural gas is the most favoured candidate. The advantages of distributed production in cogeneration plants are compared with the centralized production in larger plants using combined cycles. Finally, a project currently under development is presented: an existing thermal power plant fueled with heavy fuel oil shall be refurbished and converted to natural gas as the new fuel

Technical efficiency in milk production in underdeveloped production environment of India*.

Science.gov (United States)

Bardhan, Dwaipayan; Sharma, Murari Lal

2013-12-01

The study was undertaken in Kumaon division of Uttarakhand state of India with the objective of estimating technical efficiency in milk production across different herd-size category households and factors influencing it. Total of 60 farm households having representation from different herd-size categories drawn from six randomly selected villages of plain and hilly regions of the division constituted the ultimate sampling units of the study. Stochastic frontier production function analysis was used to estimate the technical efficiency in milk production. Multivariate regression equations were fitted taking technical efficiency index as the regressand to identify the factors significantly influencing technical efficiency in milk production. The study revealed that variation in output across farms in the study area was due to difference in their technical efficiency levels. However, it was interesting to note that smallholder producers were more technically efficient in milk production than their larger counterparts, especially in the plains. Apart from herd size, intensity of market participation had significant and positive impact on technical efficiency in the plains. This provides definite indication that increasing the level of commercialization of dairy farms would have beneficial impact on their production efficiency.

Ion cyclotron emission due to the newly-born fusion products induced fast Alfven wave radiative instabilities in tokamaks

International Nuclear Information System (INIS)

Arunasalam, V.

1995-08-01

The velocity distribution functions of the newly born (t = 0) charged fusion products of tokamak discharges can be approximated by a monoenergetic ring distribution with a finite v parallel such that v perpendicular ∼ v parallel ∼ v j where (M j V j 2 /2) = E j , the directed birth energy of the charged fusion product species j of mass M j . As the time t progresses these distribution functions will evolve into a Gaussian in velocity with thermal spreadings given by the perpendicular and parallel temperatures T perpendicularj (t) = T parallelj (t) with T j (t) increasing as t increases and finally reaches an isotropic saturation value of T perpendicularj (t ∼ τ j ) = T parallelj (t ∼ τ j ) = T j (t ∼ τ j ) ∼ [M j T d E j /(M j + M)] 1/2 , where T d is the temperature of the background deuterium plasma ions, M is the mass of a triton or a neutron for j = protons and alpha particles, respectively, and τ j ∼ τ sj /4 is the thermalization time of the fusion product species j in the background deuterium plasma and τ sj is the slowing-down time. For times t of the order of τ j their distributions can be approximated by a Gaussian in their total energy. Then for times t ≥ τ sj the velocity distributions of these fusion products will relax towards their appropriate slowing-down distributions. Here the authors will examine the radiative stability of all these distributions. The ion cyclotron emission from energetic ion produced by fusion reactions or neutral beam injection promises to be a useful diagnostic tool

Injury due to thorotrast

International Nuclear Information System (INIS)

Mori, Takesaburo

1976-01-01

A synthetic study was performed on some of those to whom Thorotrast had been injected, in Japan. In the epidemiological study of 147 war woundeds to whom Thorotrast had been injected, it was noted that the Thorotrast injection increased the mortality rate and the incidences of malignant hepatic tumor, liver cirrhosis, and hematological diseases. Clinical study of 44 of them showed that the Thorotrast injection resulted in liver and hematopoietic hypofunctions. Analysis of the dissection of the injected area in 118 cases showed malignant hepatic tumor in 63.5%, liver cirrhosis in 14.4% and hematological diseases in 10.2%. The total of the three types of disease was 88.1%. Histological classification showed that of the malignant hepatic tumors due to Thorotrast, hepatobiliary cancer and hemangioendothelioma of the liver were frequent. By the comparison of the absorbed dose in the liver of the malignant hepatic tumors due to Thorotrast with that of the cancers developed in animal experiments, it was noted that the carcinogenic dose was a mean of 2,000 - 3,000 rad by accumulated dose. It was elucidated that carcinogenesis and fibrination were primary in injury due to Thorotrast, i.e., late injury due to Thorotrast, and that the increase in the accumulated dose in rogans and the increase of the local dose due to the gigantic growth of Thorotrast granules in organs greatly influenced carninogenesis and fibrination. (Chiba, N.)

Fatigue life estimation on coke drum due to cycle optimization

Science.gov (United States)

Siahaan, Andrey Stephan; Ambarita, Himsar; Kawai, Hideki; Daimaruya, Masashi

2018-04-01

In the last decade, due to the increasing demand of petroleum product, the necessity for converting the heavy oil are increasing. Thus, demand for installing coke drum in whole world will be increase. The coke drum undergoes the cyclic high temperature and suddenly cooling but in fact is not designed to withstand that kind of cycle, thus the operational life of coke drum is much shorter in comparison to other equipment in oil refinery. Various factors determine in order to improve reliability and minimize the down time, and it is found that the cycle optimization due to cycle, temperature, and pressure have an important role. From this research it is found that the fatigue life of the short cycle is decrease by a half compare to the normal cycle. It also found that in the preheating stage, the stress peak is far exceed the yield strength of coke drum material and fall into plastic deformation. This is happened because of the temperature leap in the preheating stage that cause thermal shock in the upper part of the skirt of the coke drum.

Methylisothiazolinone: an emergent allergen in common pediatric skin care products.

Science.gov (United States)

Schlichte, Megan J; Katta, Rajani

2014-01-01

Recalcitrant dermatitis, such as that of the hands, face, or genitals, may be due to allergic contact dermatitis (ACD) from ingredients in seemingly innocuous personal care products. Rising rates of allergy have been noted due to the preservative methylisothiazolinone (MI). This preservative is commonly found in skin and hair care products, especially wipes. This study evaluated the use of MI in products specifically marketed for babies and children and examined the associated marketing terms of such products. Ingredients of skin care products specifically marketed for babies and children were surveyed at two major retailers. Of 152 products surveyed, 30 products contained MI. Categories of products surveyed included facial or body wipes, antibacterial hand wipes, hair products, soaps, bubble baths, moisturizers, and sunscreens. Facial or body wipes and hair products were the categories with the greatest number of MI-containing products. MI-containing products were manufactured by a number of popular brands. Of note, products marketed as "gentle," "sensitive," "organic," or "hypoallergenic" often contained MI, thus emphasizing the importance of consumer scrutiny of product choices. These findings reinforce the importance of educating parents and providing consumer decision-making advice regarding common skin care products, in order to help prevent ACD in children.

Methylisothiazolinone: An Emergent Allergen in Common Pediatric Skin Care Products

Directory of Open Access Journals (Sweden)

Megan J. Schlichte

2014-01-01

Full Text Available Recalcitrant dermatitis, such as that of the hands, face, or genitals, may be due to allergic contact dermatitis (ACD from ingredients in seemingly innocuous personal care products. Rising rates of allergy have been noted due to the preservative methylisothiazolinone (MI. This preservative is commonly found in skin and hair care products, especially wipes. This study evaluated the use of MI in products specifically marketed for babies and children and examined the associated marketing terms of such products. Ingredients of skin care products specifically marketed for babies and children were surveyed at two major retailers. Of 152 products surveyed, 30 products contained MI. Categories of products surveyed included facial or body wipes, antibacterial hand wipes, hair products, soaps, bubble baths, moisturizers, and sunscreens. Facial or body wipes and hair products were the categories with the greatest number of MI-containing products. MI-containing products were manufactured by a number of popular brands. Of note, products marketed as “gentle,” “sensitive,” “organic,” or “hypoallergenic” often contained MI, thus emphasizing the importance of consumer scrutiny of product choices. These findings reinforce the importance of educating parents and providing consumer decision-making advice regarding common skin care products, in order to help prevent ACD in children.

Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

DEFF Research Database (Denmark)

Schipull Kauschen, Jan

2012-01-01

extension to the concept of IPDs discussed. Due to extended product responsibility, the concept of PSSs will offer new possibilities of planning and pre-defining life cycles of IPDs more precisely than for regular building components. Reducing or eliminating point-of-sales will induce producers to optimize...... on renovation projects from Denmark, using different forms of IPDs for façade renovation and discusses the different stakeholder’s perspectives on life cycle thinking and their interests and values regarding sustainable building. Furthermore is the concept of Product Service Systems (PSS) as a valuable...

Co-existing concepts of management control : The containment of tensions due to the implementation of lean production

NARCIS (Netherlands)

Tillema, Sandra; van der Steen, Martijn

2015-01-01

There is substantial evidence that the implementation of lean production and similar inno-vations is not always successful. One of the explanations provided is that elements of tradi-tional control systems may frustrate the transformation process. Although various studies have investigated the

Evidence Based Decline in Coconut Productivity along the Coastline ...

African Journals Online (AJOL)

... production in Tanzania due to implementation of the National Coconut Development Program (NCDP). However, since phasing out of NCDP in 2004, little is known and even less is documented on the status of coconut production and productivity in the country. This study was conducted along the coastal belt where more ...

Costs of injuries due to interpersonal and self-directed violence in Thailand, 2005.

Science.gov (United States)

Bundhamcharoen, Kanitta; Odton, Patarapan; Mugem, Suwanna; Phulkerd, Sirinya; Dhisayathikom, Kanjana; Brown, David W; Tangcharoensathien, Viroj

2008-06-01

Violence, a serious public health problem in Thailand, remains largely unknown for its economic costs. This study is a national-level economic cost-estimates of injury from interpersonal and self-directed violence for Thailand during 2005 using the World Health Organization-US Centers for Disease Control and Prevention's guidelines. Direct medical costs from self-directed violence totaled 569 million Baht (THB) while the cost of interpersonal violence was THB 1.3 billion. Productivity losses for injuries due to self-directed violence were estimated at THB 12.2 billion and those for interpersonal violence were THB 14.4 billion. The total direct medical cost, thus, accounted for about 4% of Thailand's total health budget while the productivity losses accounted for approximately 0.4% of Thailand s GDP In summary, interpersonal and self-directed violence caused a total loss of 33.8 billion baht for Thailand in 2005. More than 90% of the economic loss was incurred from productivity loss and about four-fifths came from men.

Assessment of damage from reduction of expected lifespan due to cancer

Directory of Open Access Journals (Sweden)

Boris Alengordovich Korobitsyn

2013-09-01

Full Text Available This paper presents the theoretical and methodological approaches to the assessment of damage from premature mortality and reduction of life expectancy due to various reasons. The concepts measuring the price of a human life are analyzed: the evaluation from the standpoint of the theory of human capital; indirect estimation taking into account non-monetary social costs; evaluation of individuals’ willingness to pay for the elimination of the risk of death; estimation based on the determination of insurance premiums and compensations under court decision; evaluation of the social investments, aimed to reduce the risk of premature mortality of the individual. The following indexes were calculated for all subordinate entities of the Russian Federation: reduction of life expectancy, lost years of potential life in the working age, and gross regional product lost due to the reduction of years of potential life in the working-age population as a result of cancer

Ethanol production using xylitol synthesis mutant of xylose-utilizing zymomonas

Science.gov (United States)

Viitanen, Paul V.; McCutchen, Carol M.; Emptage, Mark; Caimi, Perry G.; Zhang, Min; Chou, Yat-Chen

2010-06-22

Production of ethanol using a strain of xylose-utilizing Zymomonas with a genetic modification of the glucose-fructose oxidoreductase gene was found to be improved due to greatly reduced production of xylitol, a detrimental by-product of xylose metabolism synthesized during fermentation.

Activity concentration and population dose from 226Ra due to consumption of dietary components

International Nuclear Information System (INIS)

Wagh, S.S.; Patra, A.K.; Ravi, P.M.; Sarkar, P.K.

2012-01-01

226 Ra (T 1/2 = 1620 years, α-energy 4.78 MeV, 4.59 MeV, γ-energy 186 keV), a product of natural uranium decay series, is abundantly observed in natural environment. Radium, along with its homologue calcium, an essential element in the plant system, is absorbed from the soil by plants and gets redistributed. within different parts of the plants. Because of the long half-life of 226 Ra, it gets accumulated in the human body for along time. The hazard due to ingestion of 226 Ra dissolved in water is reported to be about 40 times higher than that of 90 Sr. This paper deals with the concentration of 226 Ra in different dietary components and ingestion dose from 226 Ra due to consumption of dietary components. Internal radiation exposure to non-human biota due to 226 Ra is also discussed

Finanční due diligence

OpenAIRE

Slonka, Tomáš

2015-01-01

Thesis on financial due diligence focuses on the use of due diligence in practice. The aim of this work is to determine the risk for the investor and the calculation of the target company with and without conducting due diligence, thus finding out the added value of due diligence.

5 CFR 732.301 - Due process.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Due process. 732.301 Section 732.301...) NATIONAL SECURITY POSITIONS Due Process and Reporting § 732.301 Due process. When an agency makes an... any determination. (b) Comply with all applicable administrative due process requirements, as provided...

Economics of rapeseed production in Serbia

Directory of Open Access Journals (Sweden)

Popović Rade

2010-01-01

Full Text Available Rapeseed production in Serbia is characterized by an increasing trend, as a result of positive price signals from international market. Since previous researches on economics of rapeseed production were aimed at non-family farms, focus in this paper is on the same aspects on family farms from lowland production region. Results are analyzed in view of micro and macro-economic trends. Increase of world demand for oil crops, as a result of increasing production of renewable fuels and food needs, causes a trend of higher prices, which will probably remain in the following period. Due to this, opportunities are made for Serbian farmers in lowland production region to increase agriculture area under rapeseed. .

Pull-production in repetitive remanufacturing

Energy Technology Data Exchange (ETDEWEB)

McCaskey, D.W. Jr.

1992-09-01

In the past, production activity control practices in most repetitive remanufacturing facilities resembled those used in intermittent production operations. These operations were characterized by large amounts of work-in-process (WIP), frequent work stoppages due to part shortages, excessive overtime, low product velocity, informal scheduling between dependent operations, low employee and management moral, and a lot of wasted time, material, labor, and space. Improvement in production activity control (PAC) methods for repetitive remanufactures has been hampered by uncertainty in: supply of incoming assets, configuration of assets, process times to refurbish assets, and yields in reclamation processes. collectively these uncertainties make shop floor operations seem uncontrollable. However, one United States Army depot has taken on the challenge. Through management supported, cross-functional teams, the Tooele Army Depot has designed and implemented pull-production systems for two of its major products, with several others to follow. This article presents a generalized version of Tooele`s pull-production system and highlights design characteristics which are specific to remanufacturing applications.

Pull-production in repetitive remanufacturing

Energy Technology Data Exchange (ETDEWEB)

McCaskey, D.W. Jr.

1992-09-01

In the past, production activity control practices in most repetitive remanufacturing facilities resembled those used in intermittent production operations. These operations were characterized by large amounts of work-in-process (WIP), frequent work stoppages due to part shortages, excessive overtime, low product velocity, informal scheduling between dependent operations, low employee and management moral, and a lot of wasted time, material, labor, and space. Improvement in production activity control (PAC) methods for repetitive remanufactures has been hampered by uncertainty in: supply of incoming assets, configuration of assets, process times to refurbish assets, and yields in reclamation processes. collectively these uncertainties make shop floor operations seem uncontrollable. However, one United States Army depot has taken on the challenge. Through management supported, cross-functional teams, the Tooele Army Depot has designed and implemented pull-production systems for two of its major products, with several others to follow. This article presents a generalized version of Tooele's pull-production system and highlights design characteristics which are specific to remanufacturing applications.

Microalgal hydrogen production - A review.

Science.gov (United States)

Khetkorn, Wanthanee; Rastogi, Rajesh P; Incharoensakdi, Aran; Lindblad, Peter; Madamwar, Datta; Pandey, Ashok; Larroche, Christian

2017-11-01

Bio-hydrogen from microalgae including cyanobacteria has attracted commercial awareness due to its potential as an alternative, reliable and renewable energy source. Photosynthetic hydrogen production from microalgae can be interesting and promising options for clean energy. Advances in hydrogen-fuel-cell technology may attest an eco-friendly way of biofuel production, since, the use of H 2 to generate electricity releases only water as a by-product. Progress in genetic/metabolic engineering may significantly enhance the photobiological hydrogen production from microalgae. Manipulation of competing metabolic pathways by modulating the certain key enzymes such as hydrogenase and nitrogenase may enhance the evolution of H 2 from photoautotrophic cells. Moreover, biological H 2 production at low operating costs is requisite for economic viability. Several photobioreactors have been developed for large-scale biomass and hydrogen production. This review highlights the recent technological progress, enzymes involved and genetic as well as metabolic engineering approaches towards sustainable hydrogen production from microalgae. Copyright © 2017 Elsevier Ltd. All rights reserved.

Enhanced Ozone Production at Low Temperatures due to Ethanol (E85)

Science.gov (United States)

Ginnebaugh, D. L.; Livingstone, P. L.; Jacobson, M. Z.

2009-12-01

The increased use of ethanol in transportation fuels warrants an investigation of its consequences. An important component of such an investigation is the temperature-dependence of ethanol and gasoline exhaust chemistry. We use the near-explicit Master Chemical Mechanism (MCM, version 3.1, LEEDS University) with the SMVGEAR II chemical ordinary differential solver to provide the speed necessary to simulate explicit chemistry to examine such effects. The MCM has over 13,500 organic reactions and 4,600 species. SMVGEAR II is a sparse-matrix Gear solver that reduces the computation time significantly while maintaining any specified accuracy. Although for this study we use a box model, we determined that the speed of the MCM with the SMVGEAR solver will allow the MCM to be modeled in 3-dimensions. We also verified the accuracy of the model with comparisons to smog chamber data. We use species-resolved tailpipe emissions data for E85 (15% gasoline, 85% ethanol fuel blend) and gasoline vehicles to compare the impact of each on ozone and carcinogenic organic gases as a function of ambient temperature and background concentrations, using Los Angeles in 2020 as a base case. We use two different emissions sets - one is a compilation of data taken at near 24 C and the other from data taken at -7 C - to determine how atmospheric chemistry and emissions are affected by temperature. We include diurnal effects by examining 2 day and 5 day scenarios. We find that for both emission data sets, the average ozone concentrations through the range of temperatures tested are higher with E85 than with gasoline by 8 parts per billion volume (ppbv) at higher temperatures to 55 ppbv at low temperatures and low sunlight (winter conditions) for an area with a high nitrogen oxides (NOx) to non-methane organic gases (NMOG) ratio. The results suggest that E85's effect on health through ozone formation becomes increasingly more significant relative to gasoline as temperatures decreased due to the

Working hours and productivity

NARCIS (Netherlands)

Collewet, Marion; Sauermann, Jan

2017-01-01

This paper studies the link between working hours and productivity using daily information on working hours and performance of a sample of call centre agents. We exploit variation in the number of hours worked by the same employee across days and weeks due to central scheduling, enabling us to

The monetary value of human lives lost due to neglected tropical diseases in Africa.

Science.gov (United States)

Kirigia, Joses Muthuri; Mburugu, Gitonga N

2017-12-18

Neglected tropical diseases (NTDs) are an important cause of death and disability in Africa. This study estimates the monetary value of human lives lost due to NTDs in the continent in 2015. The lost output or human capital approach was used to evaluate the years of life lost due to premature deaths from NTDs among 10 high/upper-middle-income (Group 1), 17 middle-income (Group 2) and 27 low-income (Group 3) countries in Africa. The future losses were discounted to their present values at a 3% discount rate. The model was re-analysed using 5% and 10% discount rates to assess the impact on the estimated total value of human lives lost. The estimated value of 67 860 human lives lost in 2015 due to NTDs was Int$ 5 112 472 607. Out of that, 14.6% was borne by Group 1, 57.7% by Group 2 and 27.7% by Group 3 countries. The mean value of human life lost per NTD death was Int$ 231 278, Int$ 109 771 and Int$ 37 489 for Group 1, Group 2 and Group 3 countries, respectively. The estimated value of human lives lost in 2015 due to NTDs was equivalent to 0.1% of the cumulative gross domestic product of the 53 continental African countries. Even though NTDs are not a major cause of death, they impact negatively on the productivity of those affected throughout their life-course. Thus, the case for investing in NTDs control should also be influenced by the value of NTD morbidity, availability of effective donated medicines, human rights arguments, and need to achieve the NTD-related target 3.3 of the United Nations Sustainable Development Goal 3 (on health) by 2030.

Eyewitness Identification Reform: Data, Theory, and Due Process.

Science.gov (United States)

Clark, Steven E

2012-05-01

Some commentators view my analyses (Clark, 2012, this issue) as an important step forward in assessing the costs and benefits of eyewitness identification reform. Others suggest that the trade-off between correct identifications lost and false identifications avoided is well-known; that the expected utility model is misspecified; and that the loss of correct identifications due to the use of reformed eyewitness identification procedures is irrelevant to policy decisions, as those correct identifications are the illegitimate product of suggestion and lucky guesses. Contrary to these criticisms, the loss of correct identifications has not been adequately considered in theoretical or policy matters, criticisms regarding the various utilities do not substantively change the nature of the trade-off, and the dismissal of lost correct identifications is based not on data but on an outdated theory of recognition memory. © The Author(s) 2012.

9 CFR 94.18 - Restrictions on importation of meat and edible products from ruminants due to bovine spongiform...

Science.gov (United States)

2010-01-01

... Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE..., Finland, France, Germany, Greece, the Republic of Ireland, Israel, Italy, Japan, Liechtenstein, Luxembourg...

Utilization of the waste products from the forest industry as raw materials for the production. [In Swedish

Energy Technology Data Exchange (ETDEWEB)

Kringstad, K

1977-02-01

The economic and marketing possibilitiesof industrial production of chemicals and/or proteins by utilizing waste liquor from processes at pulp mills or bark and needles was investigated. A survey of known processes for such production is given. The costs of producing several chemicals and proteins were estimated and compared with costs of producing these products via petrochemistry. The present as well as the future market of the different chemicals and of proteins were estimated. The present investigation was performed due to the rapidly increasing oil prices.

Exploring aggregate economic damage functions due to climate change

Energy Technology Data Exchange (ETDEWEB)

Dowlatabadi, H.; Kandlikar, M.; Patwardhan, A. [and others

1994-12-31

A number of issues need to be considered when developing aggregated economic damage functions due to climate change. These include: (i) identification of production processes vulnerable to climate change, (ii) an understanding of the mechanism of vulnerability, (iii) the rate of technological advance and diffusion (iv) the issue of detection of damages and availability of response options. In this paper we will explore the implications of these considerations with the aid of an illustrative model. The findings suggest that there is a significant upward bias in damage functions calculated without consideration of these issues. Furthermore, this systematic bias is larger as climate change increases. We believe the approach explored here is a more suitable model for adoption in future integrated assessments of climate change.

Exploring aggregate economic damage functions due to climate change

International Nuclear Information System (INIS)

Dowlatabadi, H.; Kandlikar, M.; Patwardhan, A.

1994-01-01

A number of issues need to be considered when developing aggregated economic damage functions due to climate change. These include: (1) identification of production processes vulnerable to climate change, (2) an understanding of the mechanism of vulnerability, (3) the rate of technological advance and diffusion, (4) the issue of detection of damages and availability of response options. In this paper the authors will explore the implications of these considerations with the aid of an illustrative model. The findings suggest that there is a significant upward bias in damage functions calculated without consideration of these issues. Furthermore, this systematic bias is larger as climate change increases. The authors believe the approach explored here is a more suitable model for adoption in future integrated assessments of climate change

[Subjectivity, ethics and productivity in post-productive health restructuring].

Science.gov (United States)

Gomes, Doris; Ramos, Flávia Regina Souza

2015-08-01

The scope of this paper is to analyze the ethical problems generated by the modern stressor pattern of post-transformation productivity in productive restructuring in the health area. It is a qualitative study of the descriptive and exploratory type in which 30 professionals (nurses, doctors and dental surgeons) from a metropolitan region in the South of Brazil were interviewed, all of whom had prior experience in the public and private sectors. The results were analyzed through Discursive Textual Analysis. Capitalization is revealed as a major ethical problem in the series of new issues derived from the productivity-profitability imperative in health, due to the acritical incorporation of ethics that is restricted to the company's interests or to corporate-individual interests. The ethical problem of low professional commitment to the needs of the patient and of the social collective indicates the need to build a new engaged solidarity in order to increase the quality of public healthcare. Productivity targeted at individual and social needs/interests in the area of health requires a new self-managing and collective engagement of the subjects, supported by an institutional and ethical-political effort of group action, cooperation and solidarity.

Product differentiation under bounded rationality

NARCIS (Netherlands)

Vermeulen, B.; Poutré, La J.A.; Kok, de A.G.; Pyka, A.; Handa, H.; Ishibuchi, H.; Ong, Y.-S.; Tan, K.-C.

2015-01-01

We study product differentiation equilibria and dynamics on the Salop circle under bounded rationality. Due to bounded rationality, firms tend to agglomerate in pairs. Upon adding a second tier of component suppliers, downstream assemblers may escape pairwise horizontal agglomeration. Moreover, we

Fragranced consumer products: effects on asthmatics.

Science.gov (United States)

Steinemann, Anne

2018-01-01

Fragranced consumer products, such as cleaning supplies, air fresheners, and personal care products, can emit a range of air pollutants and trigger adverse health effects. This study investigates the prevalence and types of effects of fragranced products on asthmatics in the American population. Using a nationally representative sample ( n  = 1137), data were collected with an on-line survey of adults in the USA, of which 26.8% responded as being medically diagnosed with asthma or an asthma-like condition. Results indicate that 64.3% of asthmatics report one or more types of adverse health effects from fragranced products, including respiratory problems (43.3%), migraine headaches (28.2%), and asthma attacks (27.9%). Overall, asthmatics were more likely to experience adverse health effects from fragranced products than non-asthmatics (prevalence odds ratio [POR] 5.76; 95% confidence interval [CI] 4.34-7.64). In particular, 41.0% of asthmatics report health problems from air fresheners or deodorizers, 28.9% from scented laundry products coming from a dryer vent, 42.3% from being in a room cleaned with scented products, and 46.2% from being near someone wearing a fragranced product. Of these effects, 62.8% would be considered disabling under the definition of the Americans with Disabilities Act. Yet 99.3% of asthmatics are exposed to fragranced products at least once a week. Also, 36.7% cannot use a public restroom if it has an air freshener or deodorizer, and 39.7% would enter a business but then leave as quickly as possible due to air fresheners or some fragranced product. Further, 35.4% of asthmatics have lost workdays or a job, in the past year, due to fragranced product exposure in the workplace. More than twice as many asthmatics would prefer that workplaces, health care facilities and health care professionals, hotels, and airplanes were fragrance-free rather than fragranced. Results from this study point to relatively simple and cost-effective ways to

Hyperthyroxinaemia due to decreased peripheral triiodothyronine production

NARCIS (Netherlands)

Jansen, M.; Oostdijk, W.; Kingma, B.E.; Krenning, E.P.; Docter, R.; Van Den Brande, J.V.L.; Hennemann, G.

1982-01-01

Two patients, a boy of 8 and a woman of 60 years of age, had higher than normal levels of serum total thyroxine (T4), free T4 (FT4), FT4 index, and reverse triiodothyronine, but normal serum triiodothyronine (T3) levels. The pituitary-thyroid axis could be normally stimulated by

Production and characterization of β-glucosidase from Gongronella ...

African Journals Online (AJOL)

Among the enzymes of the cellulolytic complex, β-glucosidases are noteworthy due to the possibility of their application in different industrial processes, such as production of biofuels, winemaking, and development of functional foods. This study aimed to evaluate the production and characterization of β-glucosidase from ...

Management characteristics of beef cattle production in Hawaii

Science.gov (United States)

A comprehensive life cycle assessment of the United States’ beef value chain requires the collection of region-specific data for accurate characterization of the country’s diverse production practices. Cattle production in Hawaii is very different from the rest of the country due to its unique ecosy...

Sustainability of agricultural production in communal areas of ...

African Journals Online (AJOL)

Access to financial support was limited due to lack of collateral and high production risk where farmers' production is solely based on natural and unreliable rainfall patterns and therefore unsustainable. Strategies to improve food security should receive priority to support sustainable resource management, increase access ...

Production and characterization of β-glucosidase from Gongronella ...

African Journals Online (AJOL)

sunny t

2016-04-20

Apr 20, 2016 ... Among the enzymes of the cellulolytic complex, β-glucosidases are noteworthy due to the possibility of their application in different industrial processes, such as production of biofuels, winemaking, and development of functional foods. This study aimed to evaluate the production and characterization of β-.

Diabetes due to recurrent pancreatitis secondary to hypercalcemia due to primary hyperparathyroidism

Directory of Open Access Journals (Sweden)

Sumit Kumar Chakrabarti

2013-01-01

Full Text Available Acute pancreatitis due to hypercalcemia associated with hyperparathyroidism (HPT is not very common. We herein report a case of a 21-year-old woman, who presented with acute pancreatitis. She had a past history of recurrent nephrolithiasis. Subsequent evaluation revealed hypercalcemia (serum calcium: 12.6 mg/dL; low phosphate (2.9 mg/dL with elevated parathyroid hormone (PTH, 156.7 pg/mL and HbA1c (6.9%. Diagnosis of primary HPT (PHPT was made. Recurrent pancreatitis due to hypercalcemia may have resulted in diabetes mellitus.

Production Cost Efficiency and Profitability of Abakaliki Rice in ...

African Journals Online (AJOL)

acer

2014-11-17

Nov 17, 2014 ... positive and significant effect on the total cost of rice production. They were all significant ... failure is experienced due to the flooded rice field. In addition ... for random effects on production beyond the control .... Standard error.

Deference and Due Process

OpenAIRE

Vermeule, Cornelius Adrian

2015-01-01

In the textbooks, procedural due process is a strictly judicial enterprise; although substantive entitlements are created by legislative and executive action, it is for courts to decide independently what process the Constitution requires. The notion that procedural due process might be committed primarily to the discretion of the agencies themselves is almost entirely absent from the academic literature. The facts on the ground are very different. Thanks to converging strands of caselaw ...

Buyer-Supplier Collaboration in New Product Development - Reduction of Ramp-up time for high-tech products

OpenAIRE

Nielsen, Halvor Eid

2015-01-01

Product development has always been a key activity to gain competitive advantage. Especially in technology based industry, such as the maritime subsea industry. Due to increasing globalization and high competition from low cost countries, companies need to streamline the supply chain and development in order to get new product out on the market fast and efficient. Involving suppliers in the development have shown great effect on reduced development time and cost while increasing quality of...

Neutron activation analysis (NAA), radioisotope production via neutron activation (PNA) and fission product gas-jet (GJA)

Energy Technology Data Exchange (ETDEWEB)

Gaeggeler, H W [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1996-11-01

Three different non-diffractive applications of neutrons are outlined, neutron activation analysis, production of radionuclides, mostly for medical applications, and production of short-lived fission nuclides with a so-called gas-jet. It is shown that all three devices may be incorporated into one single insert at SINQ due to their different requests with respect to thermal neutron flux. Some applications of these three facilities are summarized. (author) 3 figs., 1 tab., 8 refs.

Neutron activation analysis (NAA), radioisotope production via neutron activation (PNA) and fission product gas-jet (GJA)

International Nuclear Information System (INIS)

Gaeggeler, H.W.

1996-01-01

Three different non-diffractive applications of neutrons are outlined, neutron activation analysis, production of radionuclides, mostly for medical applications, and production of short-lived fission nuclides with a so-called gas-jet. It is shown that all three devices may be incorporated into one single insert at SINQ due to their different requests with respect to thermal neutron flux. Some applications of these three facilities are summarized. (author) 3 figs., 1 tab., 8 refs

Surface negative ion production in ion sources

International Nuclear Information System (INIS)

Belchenko, Y.

1993-01-01

Negative ion sources and the mechanisms for negative ion production are reviewed. Several classes of sources with surface origin of negative ions are examined in detail: surface-plasma sources where ion production occurs on the electrode in contact with the plasma, and ''pure surface'' sources where ion production occurs due to conversion or desorption processes. Negative ion production by backscattering, impact desorption, and electron- and photo-stimulated desorption are discussed. The experimental efficiencies of intense surface negative ion production realized on electrodes contacted with hydrogen-cesium or pure hydrogen gas-discharge plasma are compared. Recent modifications of surface-plasma sources developed for accelerator and fusion applications are reviewed in detail

Exposure-Relevant Consumer Product Usage Information Derived from Longitudinal Purchasing Data

Science.gov (United States)

Consumer products that are used in and around the home are a dominant source for anthropogenic chemical exposure. Prediction of the population distribution of chemical exposures encountered due to the residential use of consumer products (such as personal care products, cleaning ...

Operational costs induced by fluctuating wind power production in Germany and Scandinavia

DEFF Research Database (Denmark)

Meibom, Peter; Weber, C.; Barth, R.

2009-01-01

Adding wind power generation in a power system changes the operational patterns of the existing units due to the variability and partial predictability of wind power production. For large amounts of wind power production, the expectation is that the specific operational costs (fuel costs, start......-up costs, variable operation and maintenance costs, costs of consuming CO2 emission permits) of the other power plants will increase due to more operation time in part-load and more start-ups. The change in operational costs induced by the wind power production can only be calculated by comparing...... the operational costs in two power system configurations: with wind power production and with alternative wind production having properties such as conventional production, that is, being predictable and less variable. The choice of the characteristics of the alternative production is not straightforward...

Production loss among employees perceiving work environment problems.

Science.gov (United States)

Lohela-Karlsson, Malin; Hagberg, Jan; Bergström, Gunnar

2015-08-01

The overall aim of this explorative study was to investigate the relationship between factors in the psychosocial work environment and work environment-related production loss. Employees at a Swedish university were invited to answer a workplace questionnaire and were selected for this study if they reported having experienced work environment-related problems in the past 7 days (n = 302). A stepwise logistic regression and a modified Poisson regression were used to identify psychosocial work factors associated with work environment-related production loss as well as to identify at what level those factors are associated with production loss. Employees who reported having experienced work environment problems but also fair leadership, good social climate, role clarity and control of decision had significantly lower levels of production loss, whereas employees who reported inequality and high decision demands reported significantly higher levels of production loss. Never or seldom experiencing fair leadership, role clarity, equality, decision demands and good social climate increase the risk of production loss due to work environment problems, compared to those who experience these circumstances frequently, always or most of the time. Several psychosocial work factors are identified as factors associated with a reduced risk of production losses among employees despite the nature of the work environment problem. Knowledge of these factors may be important not only to reduce employee ill-health and the corresponding health-related production loss, but also reduce immediate production loss due to work environment-related problems.

A-Well defined raw material specifications of product and its components, a key of successful new product design. A critical evaluation by case study

OpenAIRE

Vidyadhar Malhar Dandge; Heramb Vidyadhar Dandge

2015-01-01

New product design and development indeed needs long termvision for better product life and hence to have better product features the design team has to take into consideration various techno-commercial aspects todesign and develop most adequate new product. Normally in case of new product design all related activities are initiated by the team of technicians under the directive jointly given by top and marketing management of the concerned organization. Due to global competition ...

Qubit dephasing due to quasiparticle tunneling

Energy Technology Data Exchange (ETDEWEB)

Zanker, Sebastian; Marthaler, Michael; Schoen, Gerd [Institut fuer Theoretische Festkoerperphysik, Karlsruhe Institute of Technology, D-76128 Karlsruhe (Germany)

2015-07-01

We study dephasing of a superconducting qubit due to quasiparticle tunneling through a Josephson junction. While qubit decay due to tunneling processes is well understood within a golden rule approximation, pure dephasing due to BCS quasiparticles gives rise to a divergent golden rule rate. We calculate qubit dephasing due to quasiparticle tunneling beyond lowest order approximation in coupling between qubit and quasiparticles. Summing up a certain class of diagrams we show that qubit dephasing due to purely longitudinal coupling to quasiparticles leads to dephasing ∝ exp(-x(t)) where x(t) ∝ t{sup 3/2} for short time scales and x(t) ∝ tlog(t) for long time scales.

Inclusive J / $\\psi$ Production at D0

Energy Technology Data Exchange (ETDEWEB)

Murphy, Christopher R. [Indiana U.

1995-04-01

We present results on inclusive $J/\\psi$ and b-quark production in $p\\bar{p}$ collisions at $\\sqrt{s}$ = 1.8 TeV. The results are based on data collected at the D0 experiment during the 1992-1993 FermiLab collider run. There is excellent agreement between the differential $J/\\psi$ cross section measured at D0 and that measured at the CDF detector. A measurement of the fraction of $J/\\psi$ events due to b-quark decays is presented and we extract from this a measurement of the integrated b-quark cross section. The radiative decays of $_{Xc}$ charmonium states into the $J/\\psi$ is discussed and we present results on the fraction of $J/\\psi$ mesons that are due to $_{Xc}$ decays. We also observe that a fraction of promptly produced $J/\\psi$ mesons is larger than the measured fraction of $J/\\psi$ due to $_{Xc}$ decays and is not accounted for by existing charmonium. production models.

Cost Effective Technologies and Renewable Substrates for Biosurfactants’ Production

Directory of Open Access Journals (Sweden)

Ibrahim M Banat

2014-12-01

Full Text Available Diverse types of microbial surface-active amphiphilic molecules are produced by a range of microbial communities. The extraordinary properties of biosurfactant / bioemulsifier (BS/BE as surface active products allows them to have key roles in various field of applications such as bioremediation, biodegradation, enhanced oil recovery, pharmaceutics, food processing among many others. This leads to a vast number of potential applications of these BS/BE in different industrial sectors. Despite the huge number of reports and patents describing BS and BE applications and advantages, commercialization of these compounds remain difficult, costly and to a large extent irregular. This is mainly due to the usage of chemically synthesized media for growing producing microorganism and in turn the production of preferred quality products. It is important to note that although a number of developments have taken place in the field of biosurfactant industries, large scale production remains economically challenging for many types of these products. This is mainly due to the huge monetary difference between the investment and achievable productivity from the commercial point of view. This review discusses low cost, renewable raw substrates and fermentation technology in BS/BE production processes and their role in reducing the production cost.

The Potential of Animal By-Products in Food Systems: Production, Prospects and Challenges

Directory of Open Access Journals (Sweden)

Babatunde O. Alao

2017-06-01

Full Text Available The consumption of animal by-products has continued to witness tremendous growth over the last decade. This is due to its potential to combat protein malnutrition and food insecurity in many countries. Shortly after slaughter, animal by-products are separated into edible or inedible parts. The edible part accounts for 55% of the production while the remaining part is regarded as inedible by-products (IEBPs. These IEBPs can be re-processed into sustainable products for agricultural and industrial uses. The efficient utilization of animal by-products can alleviate the prevailing cost and scarcity of feed materials, which have high competition between animals and humans. This will also aid in reducing environmental pollution in the society. In this regard, proper utilization of animal by-products such as rumen digesta can result in cheaper feed, reduction in competition and lower cost of production. Over the years, the utilization of animal by-products such as rumen digesta as feed in livestock feed has been successfully carried out without any adverse effect on the animals. However, there are emerging gaps that need to be further addressed regarding the food security and sustainability of the products. Therefore, the objective of this review highlights the efficacy and effectiveness of using animal by-products as alternative sources of feed ingredients, and the constraints associated with their production to boost livestock performance in the industry at large.

Oil Production, Refining and Transportation in Canada

Directory of Open Access Journals (Sweden)

Igbal A. Guliyev

2015-01-01

Full Text Available The article deals with fuel and energy complex of Canada as one of the largest manufacturers of primary energy in the world, which provides up to 6 percent of the world energy supply. Only the Russian Federation, PRC, the United States of America and the Kingdom of Saudi Arabia have larger production volumes. However, oil plays the most significant role in Canada's energy exports. It is estimated that its proven reserves are sufficient to meet the demand for 140 years at current production rate. The relevance of the study, including the analysis of fuel and energy complex of Canada, is due to the fact that such comparison and synthesis of data on the amount of recoverable oil reserves, the volume of its production, imports, exports and transit of oil and oil products, the distribution of oil for transportation (via pipelines, rail, sea, road, strategic oil field, refining and transportation of oil and oil products development projects, as well as implementation of Canada's best practices in the Russian Federation, is being developed for the first time. In addition, the data given in previously published articles on the subject, due to the dynamic development of the industry, are obsolete and do not reflect the real situation.

GLOBAL PRODUCTION SYSTEM

Directory of Open Access Journals (Sweden)

Dumitru FILIPEANU

2016-07-01

Full Text Available The most significant transformations that globalization produces occur in production. Since the '60s, a new division of labor has made its presence felt in the world, arising from the "de-industrialization" of the developed and transfer production capacity of resource-intensive industries and pollutants from these countries to the developing world. "Dislocation" industry had the interim foreign direct investment made in the new industrialized countries, the latter becoming, in turn, sources of direct foreign investment, taking its capital in other countries in developing handsets. Currently, FDI destination is no longer a priority in developing countries, yet they are increasingly leaning towards the developed countries, due to the attractiveness offered by their economies.

Principle and perspectives of hydrogen production through biocatalyzed electrolysis

NARCIS (Netherlands)

Rozendal, R.A.; Hamelers, H.V.M.; Euverink, G.J.W.; Metz, S.J.; Buisman, C.J.N.

2006-01-01

Biocatalyzed electrolysis is a novel biological hydrogen production process with the potential to efficiently convert a wide range of dissolved organic materials in wastewaters. Even substrates formerly regarded to be unsuitable for hydrogen production due to the endothermic nature of the involved

Potential Development Essential Oil Production of Central Java, Indonesia

Science.gov (United States)

Alighiri, D.; Eden, W. T.; Supardi, K. I.; Masturi; Purwinarko, A.

2017-04-01

Indonesia is the source of raw essential oil in the world. Essential oils are used in various types of industries such as food and beverage, flavour, fragrance, perfumery, pharmaceuticals, and cosmetics. However, the development of Indonesian essential oil industry has not been encouraging for the production of essential oils, further it is unable to meet global demand. Besides that, the quality of volatile oil resulted cannot meet the international market standards. Based on the facts, the potential of Indonesian essential oils needs to be developed to provide added value, through increased production, improved quality and product diversification. One part of Indonesia having abundant of raw essential oil source is Central Java. Central Java has the quite large potential production of essential oils. Some essential oils produced from refining industry owned by the government, private and community sectors include cananga oils (Boyolali district), clove oils (Semarang district), patchouli oils (Brebes district, Pemalang district, and Klaten district). The main problem in the development of plants industries that producing essential oil in Central Java is low crops production, farming properties, quality of essential oils are diverse, providing poor-quality products and volatile oil price fluctuations. Marketing constraints of Central Java essential oils are quite complex supply chain. In general, marketing constraints of essential oils due to three factors, namely the low quality due to type of essential oil business that generally shaped small businesses with different capital and technology, domestic marketing is still a buyer-market (price determined by the buyer) because of weak bargaining position processors businessman, and prices fluctuate (domestic and foreign) due to uncontrolled domestic production and inter-country competition among manufacturers.

Anaphylaxis due to caffeine

OpenAIRE

Sugiyama, Kumiya; Cho, Tatsurai; Tatewaki, Masamitsu; Onishi, Shogo; Yokoyama, Tatsuya; Yoshida, Naruo; Fujimatsu, Takayoshi; Hirata, Hirokuni; Fukuda, Takeshi; Fukushima, Yasutsugu

2015-01-01

We report a rare case of anaphylaxis due to caffeine intake. A 27-year-old woman suffered her first episode of anaphylaxis and a positive skin prick test suggested that the anaphylaxis was due to an IgE-mediated hypersensitivity reaction to caffeine. She was diagnosed with caffeine allergy and has not had an allergic reaction after avoiding foods and drinks containing caffeine. Although caffeine is known to have antiallergic effects, this case shows that caffeine can be an allergen and cause ...

SUSY-QCD corrections to Higgs boson production at hadron colliders

International Nuclear Information System (INIS)

Djouadi, A.; Spira, M.

1999-12-01

We analyze the next-to-leading order SUSY-QCD corrections to the production of Higgs particles at hadron colliders in supersymmetric extensions of the standard model. Besides the standard QCD corrections due to gluon exchange and emission, genuine supersymmetric corrections due to the virtual exchange of squarks and gluinos are present. At both the Tevatron and the LHC, these corrections are found to be small in the Higgs-strahlung, Drell-Yan-like Higgs pair production and vector boson fusion processes. (orig.)

Smartphone addiction, daily interruptions and self-reported productivity

Directory of Open Access Journals (Sweden)

Éilish Duke

2017-12-01

Full Text Available The advent of the smartphone has dramatically altered how we communicate, navigate, work and entertain ourselves. While the advantages of this new technology are clear, constant use may also bring negative consequences, such as a loss of productivity due to interruptions in work life. A link between smartphone overuse and loss of productivity has often been hypothesized, but empirical evidence on this question is scarce. The present study addressed this question by collecting self-report data from N=262 participants, assessing private and work-related smartphone use, smartphone addiction and self-rated productivity. Our results indicate a moderate relationship between smartphone addiction and a self-reported decrease in productivity due to spending time on the smartphone during work, as well as with the number of work hours lost to smartphone use. Smartphone addiction was also related to a greater amount of leisure time spent on the smartphone and was strongly related to a negative impact of smartphone use on daily non-work related activities. These data support the idea that tendencies towards smartphone addiction and overt checking of the smartphone could result in less productivity both in the workplace and at home. Results are discussed in relation to productivity and technostress.

Smartphone addiction, daily interruptions and self-reported productivity.

Science.gov (United States)

Duke, Éilish; Montag, Christian

2017-12-01

The advent of the smartphone has dramatically altered how we communicate, navigate, work and entertain ourselves. While the advantages of this new technology are clear, constant use may also bring negative consequences, such as a loss of productivity due to interruptions in work life. A link between smartphone overuse and loss of productivity has often been hypothesized, but empirical evidence on this question is scarce. The present study addressed this question by collecting self-report data from N  = 262 participants, assessing private and work-related smartphone use, smartphone addiction and self-rated productivity. Our results indicate a moderate relationship between smartphone addiction and a self-reported decrease in productivity due to spending time on the smartphone during work, as well as with the number of work hours lost to smartphone use. Smartphone addiction was also related to a greater amount of leisure time spent on the smartphone and was strongly related to a negative impact of smartphone use on daily non-work related activities. These data support the idea that tendencies towards smartphone addiction and overt checking of the smartphone could result in less productivity both in the workplace and at home. Results are discussed in relation to productivity and technostress.

NLO Quarkonium Production in Hadronic Collisions

CERN Document Server

Mangano, Michelangelo L.

1996-01-01

We present some preliminary results on the next-to-leading order calculation in QCD of quarkonium production cross sections in hadronic collisions. We will show that the NLO total cross sections for $P$-wave states produced at high energy are not reliable, due to the appearance of very large and negative contributions. We also discuss some issues related to the structure of final states in colour-octet production and to high-p_T fragmentation.

Village poultry production in Madagascar: Production characteristics and epidemiology

International Nuclear Information System (INIS)

Koko, M.; Maminiaina, O.F.; Ravaomanana, J.; Rakotonindrina, S.J.

2002-01-01

In order to investigate the production characteristics of village poultry in Madagascar, a cross sectional survey was done in May, 1999 in zone 1 and in June 1999 in zone 2. Furthermore, a longitudinal survey was done in 33 farms in the two zones during a 12 month period providing information on flock dynamics and causes of mortality. The indigenous chicken in Madagascar represents 91% of the total poultry population. Each farm has on average 11 birds, which survive by scavenging. The average productivity is 33.3 eggs/hen/year and 2.76 clutches/hen/year. The average hatchability is 77.8% and 75% of the eggs are used for renewing the flock. Mortality figures are very high: 42.3% of the chicks die before weaning and 34.5% of the growers die before becoming adults. Mortality of adults is on average 3 1.4%. Mortality is due to various factors, but is mainly due to internal parasites in the chicks (38.5%), especially during the dry season. Newcastle disease (ND) is the most important infectious cause of mortality causing more than 68.8% of the deaths in growers and 75% in the adults. Post mortem results confirmed serological information using the indirect haemagglutination test indicating the importance of ND. However, further study is necessary to identify the wild strains of ND that might circulate in Madagascar. (author) [fr

Challenges in enzymatic route of mannitol production.

Science.gov (United States)

Bhatt, Sheelendra Mangal; Mohan, Anand; Srivastava, Suresh Kumar

2013-01-01

Mannitol is an important biochemical often used as medicine and in food sector, yet its biotechnological is not preffered in Industry for large scale production, which may be due to the multistep mechanism involved in hydrogenation and reduction. This paper is a comparative preview covering present chemical and biotechnological approaches existing today for mannitol production at industrial scale. Biotechnological routes are suitable for adaptation at industrial level for mannitol production, and whatever concerns are there had been discussed in detail, namely, raw materials, broad range of enzymes with high activity at elevated temperature suitable for use in reactor, cofactor limitation, reduced by-product formation, end product inhibition, and reduced utilization of mannitol for enhancing the yield with maximum volumetric productivity.

A Proposal for Production Data Collection on a Hybrid Production Line in Cooperation with MES

Science.gov (United States)

Znamenák, Jaroslav; Križanová, Gabriela; Iringová, Miriam; Važan, Pavel

2016-12-01

Due to the increasing competitive environment in the manufacturing sector, many industries have the need for a computer integrated engineering management system. The Manufacturing Execution System (MES) is a computer system designed for product manufacturing with high quality, low cost and minimum lead time. MES is a type of middleware providing the required information for the optimization of production from launching of a product order to its completion. There are many studies dealing with the advantages of the use of MES, but little research was conducted on how to implement MES effectively. A solution to this issue are KPIs. KPIs are important to many strategic philosophies or practices for improving the production process. This paper describes a proposal for analyzing manufacturing system parameters with the use of KPIs.

A Proposal for Production Data Collection on a Hybrid Production Line in Cooperation with MES

Directory of Open Access Journals (Sweden)

Znamenák Jaroslav

2016-12-01

Full Text Available Due to the increasing competitive environment in the manufacturing sector, many industries have the need for a computer integrated engineering management system. The Manufacturing Execution System (MES is a computer system designed for product manufacturing with high quality, low cost and minimum lead time. MES is a type of middleware providing the required information for the optimization of production from launching of a product order to its completion. There are many studies dealing with the advantages of the use of MES, but little research was conducted on how to implement MES effectively. A solution to this issue are KPIs. KPIs are important to many strategic philosophies or practices for improving the production process. This paper describes a proposal for analyzing manufacturing system parameters with the use of KPIs.

Conceptual Modelling for Product Configuration Systems

DEFF Research Database (Denmark)

Shafiee, Sara

Individual customization of goods and processes in different industries leads to complexity due to a growing mix of products both regarding characteristics of products and support services. In order to eliminate complexity and challenges in product/process customizing, smart IT systems called...... Product Configuration Systems (PCS), have been proposed as the solution both by researchers and practitioners and various benefits are mentioned from utilizing PCSs. Based on the latest literature, there are challenges reported in all phases of PCS projects including planning, development......, and documentation. Moreover, the challenges become more serious when it involves complicated products/processes in engineer-to-order (ETO) companies. The purpose of this thesis is to contribute to the existing knowledge of managing PCS projects by proposing frameworks and tools to address some of the main...

Environmental Sustainability Analysis of Biodiesel Production

DEFF Research Database (Denmark)

Herrmann, Ivan Tengbjerg; Hauschild, Michael Michael Zwicky; Birkved, Morten

Due to their generally positive carbon dioxide balance, biofuels are seen as one of the energy carriers in a more sustainable future transportation energy system, but how good is their environmental sustainability, and where lie the main potentials for improvement of their sustainability? Questions...... like these require a life cycle perspective on the biofuel - from the cradle (production of the agricultural feedstock) to the grave (use as fuel). An environmental life cycle assessment is performed on biodiesel to compare different production schemes including chemical and enzymatic esterification...... with the use of methanol or ethanol. The life cycle assessment includes all processes needed for the production, distribution and use of the biodiesel (the product system), and it includes all relevant environmental impacts from the product system, ranging from global impacts like climate change and loss...

Products by Glycation Process

Directory of Open Access Journals (Sweden)

Liliana Ortega

2015-01-01

Full Text Available The antioxidant properties of sweet and acid whey products were incremented by polymerization of their proteins by glycation of whey protein concentrates (WPC and their hydrolyzates (WPCH with ribose and glucose in individual experiments under similar concentration. Heating at 50°C during 20 h maximum and pH 7 and pH 9 were used in all tests. The higher activity was found in WPC glycosylates products with ribose at pH 7 and heating during 10–15 h. In comparable form, antioxidant activity in WPCH was incremented by prior hydrolysis to glycation with 25–45% of hydrolysis degree. Further functional properties of whey proteins (solubility, emulsion, and foam were also improved by the polymerization with ribose. The color of polymerized products due to Maillard reactions was associated with antioxidant activity of each compound; however comparative color in glycosylates products with glucose and ribose did not show this effect.

Does increased Nitric Oxide production and oxidative stress due to high fat diet affect cardiac function after myocardial infarction?

Directory of Open Access Journals (Sweden)

Marjan Aghajani

2017-01-01

Full Text Available Background &Objectives: High fat (HF diet by affecting the oxidative stress and nitric oxide (NO production may lead to different effects on function of the heart after myocardial infarction (MI. In the present study we aimed to address the hypothesis that high release of NO by activated macrophages affects LV function after MI.Methods: The animals were randomly divided into four groups comprising each of 10 rats: 1 Sham; 2 MI; 3 Sham+ HF diet; 4 MI+ HF diet. Animals fed with HF diet 30 days before sham and MI surgery. MI was induced by permanent ligation of left anterior descending coronary artery (LAD. Nitric oxide (NO production of peritoneal macrophages, the concentrations of MDA in the heart and the infarct size were measured.Results: Our study indicated that HF has adverse effects on myocardium and it may increase NO production as well as oxidative stress, resulting in augmentation of infarct size.Conclusion: Our results add to our knowledge that HF diet was associated with overproduction of NO by peritoneal macrophages and ROS that lead to development of infarct size and adverse remodeling.

Thermo-Insulation Properties Of Hemp-Based Products

Directory of Open Access Journals (Sweden)

Lekavicius V.

2015-02-01

Full Text Available As known, many multi-purpose plants can be used in different industries. This research is focused on the possibilities to utilize hemp as feedstock for thermal insulation products. The most advantageous features of hemp insulation are associated with health and environmental safety. The thermal conductivity of commercially available hemp insulation products is comparable with that of other fibrous insulation materials; however, it is possible to develop new products that could be more efficient in terms of cost and due to other important features.

Application of agave subproducts for production of microbial inulinases

Directory of Open Access Journals (Sweden)

Huerta Alcocer, S.A.

2014-07-01

Full Text Available Mexico is the center of origin of the genus Agave spp. with 159 endemic species, 75 % of all known species. The main use of these plants is in the production of alcoholic beverages, mainly tequila, which is obtained from the “pines” of A. tequilana Weber var. Azul. During tequila production, a huge amount of waste is produced, including leaves that are not used. Main compounds found in these subproducts are polysaccharides, specifically inulin. Current review focuses on the use of these agricultural wastes to obtain inulinase production, and in the production of high fructose syrup using these enzymes in these wastes. Currently, high fructose syrups, especially oligosaccharides, have prompted much interest for their benefits to health due to its low glycemic index and their function as prebiotic in the intestinal flora. The main microorganisms involved with inulinases production belong to the genera Aspergillus and Kluyveromyces. The latter is preferred in the industry due to its high growth rate, high temperature tolerance (52 °C and by having the GRAS (Generally Recognized As Safe status. This review emphasizes on the advances achieved in the production of inulinases by yeast K. marxianus.

Fermentative production of isobutene.

Science.gov (United States)

van Leeuwen, Bianca N M; van der Wulp, Albertus M; Duijnstee, Isabelle; van Maris, Antonius J A; Straathof, Adrie J J

2012-02-01

Isobutene (2-methylpropene) is one of those chemicals for which bio-based production might replace the petrochemical production in the future. Currently, more than 10 million metric tons of isobutene are produced on a yearly basis. Even though bio-based production might also be achieved through chemocatalytic or thermochemical methods, this review focuses on fermentative routes from sugars. Although biological isobutene formation is known since the 1970s, extensive metabolic engineering is required to achieve economically viable yields and productivities. Two recent metabolic engineering developments may enable anaerobic production close to the theoretical stoichiometry of 1isobutene + 2CO(2) + 2H(2)O per mol of glucose. One relies on the conversion of 3-hydroxyisovalerate to isobutene as a side activity of mevalonate diphosphate decarboxylase and the other on isobutanol dehydration as a side activity of engineered oleate hydratase. The latter resembles the fermentative production of isobutanol followed by isobutanol recovery and chemocatalytic dehydration. The advantage of a completely biological route is that not isobutanol, but instead gaseous isobutene is recovered from the fermenter together with CO(2). The low aqueous solubility of isobutene might also minimize product toxicity to the microorganisms. Although developments are at their infancy, the potential of a large scale fermentative isobutene production process is assessed. The production costs estimate is 0.9 Euro kg(-1), which is reasonably competitive. About 70% of the production costs will be due to the costs of lignocellulose hydrolysate, which seems to be a preferred feedstock.

Enriching step-based product information models to support product life-cycle activities

Science.gov (United States)

Sarigecili, Mehmet Ilteris

The representation and management of product information in its life-cycle requires standardized data exchange protocols. Standard for Exchange of Product Model Data (STEP) is such a standard that has been used widely by the industries. Even though STEP-based product models are well defined and syntactically correct, populating product data according to these models is not easy because they are too big and disorganized. Data exchange specifications (DEXs) and templates provide re-organized information models required in data exchange of specific activities for various businesses. DEXs show us it would be possible to organize STEP-based product models in order to support different engineering activities at various stages of product life-cycle. In this study, STEP-based models are enriched and organized to support two engineering activities: materials information declaration and tolerance analysis. Due to new environmental regulations, the substance and materials information in products have to be screened closely by manufacturing industries. This requires a fast, unambiguous and complete product information exchange between the members of a supply chain. Tolerance analysis activity, on the other hand, is used to verify the functional requirements of an assembly considering the worst case (i.e., maximum and minimum) conditions for the part/assembly dimensions. Another issue with STEP-based product models is that the semantics of product data are represented implicitly. Hence, it is difficult to interpret the semantics of data for different product life-cycle phases for various application domains. OntoSTEP, developed at NIST, provides semantically enriched product models in OWL. In this thesis, we would like to present how to interpret the GD & T specifications in STEP for tolerance analysis by utilizing OntoSTEP.

The effect of autoimmune blistering diseases on work productivity.

Science.gov (United States)

Wang, E Q; Radjenovic, M; Castrillón, M A; Feng, G H Y; Murrell, D F

2018-05-06

Autoimmune blistering diseases (AIBD) are known to negatively impact upon quality of life (QoL); however, there is a paucity of research on the effect of AIBD on work productivity. AIBD can be quite disfiguring in terms of a patient's appearance due to their blistering nature. To determine the impact of AIBD on work productivity and to determine whether patients are stigmatized at work due to their appearance. Sixty-one patients with AIBD completed the Work Productivity and Activity Impairment Questionnaire-Specific Health Problem (WPAIQ-SHP), the Dermatology Life Quality Index (DLQI), the Autoimmune Bullous Disease Quality of Life (ABQOL) and the Treatment of Autoimmune Bullous Disease Quality of Life questionnaires (TABQOL). Non-responders to treatment had more work and activity impairment compared to responders. Worse WPAIQ-SHP scores were correlated with higher ABQOL, TABQOL and DLQI scores. Approximately 14.8% of subjects experienced stigmatization at work due to their appearance. The most common body areas stigmatized were easily visible sites, particularly the hands, arms and feet, with the majority of occurrences related to co-workers; for some patients, this stigmatization occurred on a daily basis. Loss of productivity at work was statistically much higher in those with higher disease severity, ABQOL & TABQOL scores and in non-responders to treatment. Autoimmune blistering diseases negatively impacts upon work productivity and activity. Stigmatization was common in the workplace which leads to increased stress, itself a stimulator of pemphigus. © 2018 European Academy of Dermatology and Venereology.

Product Safety Culture: A New Variant of Safety Culture?

International Nuclear Information System (INIS)

Suhanyiova, L.; Flin, R.; Irwin, A.

2016-01-01

Product safety culture is a new research area which concerns user safety rather than worker or process safety. The concept appears to have emerged after the investigation into the Nimrod aircraft accident (Haddon-Cave, 2009) which echoed aspects of NASA’s Challenger and Columbia crashes. In these cases, through a blend of human and organizational failures, the culture deteriorated to the extent of damaging product integrity, resulting in user fatalities. Haddon-Cave noted that it was due to a failure in leadership and organizational safety culture that accidents such as the Nimrod happened, where the aircraft exploded due to several serious technical failures, preceded by deficiencies in the safety case. Now some organizations are starting to measure product safety culture. This is important in day-to-day life as well, where a product failure as a result of poor organizational safety culture, can cause user harm or death, as in the case of Takata airbags scandal in 2015. Eight people have lost their lives and many were injured. According to investigation reports this was due to the company’s safety malpractices of fixing faulty airbags and proceeding to install them in vehicles, as well as secretly conducting tests to assess the integrity of their product and then deleting the data and denying safety issues as a result of the company’s cost-cutting policies. As such, organizational culture, specifically the applications of safety culture, can have far-reaching consequences beyond the workplace of an organization.

LCA of nanotechnological products -What’s the issues?

DEFF Research Database (Denmark)

Olsen, Stig Irving

The number of nanotechnological products (NPs) on the market are steadily increasing but environmental aspects of their life cycle are still to a large extent disregarded presumably due to lack of data and a neglect from the nanoresearchers. Although essentially comparable, LCAs of NPs does involve...... a number of product examples from both micro- and nanotechnology the specificities of LCAs of NPs are identified. The product may introduce entirely new functionalities and system boundaries may need to include production facilities. Development of new methods of characterising the toxic impacts from...

THE COMPETITIVENESS OF SOYBEAN PRODUCTION IN BLITAR-EAST JAVA, INDONESIA

Directory of Open Access Journals (Sweden)

Moh. Azis Arisudi

2008-12-01

Full Text Available In East Java Province, the government still provides subsidy to soybean production in the form of soft credit to production inputs. Since the government budget and subsidy have been limited, efficiency in production, marketing and trade become crucial issues. The conducted research will try to achieve some research objectives as follows: Analyzing soybean farmer income in the Blitar District at the different cropping system; Obtaining analysis on comparative advantage and competitive-ness of soybean by different cropping system; analyzing influences of social price changes to farmers income due to public investment; and analyzing government policy impact on farmers income due to market/actual price development. The research uses Policy Analysis Matrix to obtain competitiveness rate, efficiency and impact of government policy on soybean production under multi-cropping system and different ecological zones in the Blitar district.

Strategies for fuel cell product development. Developing fuel cell products in the technology supply chain

International Nuclear Information System (INIS)

Hellman, H.L.

2004-01-01

Due to the high cost of research and development and the broad spectrum of knowledge and competences required to develop fuel cell products, many product-developing firms outsource fuel cell technology, either partly or completely. This article addresses the inter-firm process of fuel cell product development from an Industrial Design Engineering perspective. The fuel cell product development can currently be characterised by a high degree of economic and technical uncertainty. Regarding the technology uncertainty: product-developing firms are more often then not unfamiliar with fuel cell technology technology. Yet there is a high interface complexity between the technology supplied and the product in which it is to be incorporated. In this paper the information exchange in three current fuel cell product development projects is analysed to determine the information required by a product designer to develop a fuel cell product. Technology transfer literature suggests that transfer effectiveness is greatest when the type of technology (technology uncertainty) and the type of relationship between the technology supplier and the recipient are carefully matched. In this line of thinking this paper proposes that the information required by a designer, determined by the design strategy and product/system volume, should be met by an appropriate level of communication interactivity with a technology specialist. (author)

Consistent quantification of climate impacts due to biogenic carbon storage across a range of bio-product systems

Energy Technology Data Exchange (ETDEWEB)

Guest, Geoffrey, E-mail: geoffrey.guest@ntnu.no; Bright, Ryan M., E-mail: ryan.m.bright@ntnu.no; Cherubini, Francesco, E-mail: francesco.cherubini@ntnu.no; Strømman, Anders H., E-mail: anders.hammer.stromman@ntnu.no

2013-11-15

Temporary and permanent carbon storage from biogenic sources is seen as a way to mitigate climate change. The aim of this work is to illustrate the need to harmonize the quantification of such mitigation across all possible storage pools in the bio- and anthroposphere. We investigate nine alternative storage cases and a wide array of bio-resource pools: from annual crops, short rotation woody crops, medium rotation temperate forests, and long rotation boreal forests. For each feedstock type and biogenic carbon storage pool, we quantify the carbon cycle climate impact due to the skewed time distribution between emission and sequestration fluxes in the bio- and anthroposphere. Additional consideration of the climate impact from albedo changes in forests is also illustrated for the boreal forest case. When characterizing climate impact with global warming potentials (GWP), we find a large variance in results which is attributed to different combinations of biomass storage and feedstock systems. The storage of biogenic carbon in any storage pool does not always confer climate benefits: even when biogenic carbon is stored long-term in durable product pools, the climate outcome may still be undesirable when the carbon is sourced from slow-growing biomass feedstock. For example, when biogenic carbon from Norway Spruce from Norway is stored in furniture with a mean life time of 43 years, a climate change impact of 0.08 kg CO{sub 2}eq per kg CO{sub 2} stored (100 year time horizon (TH)) would result. It was also found that when biogenic carbon is stored in a pool with negligible leakage to the atmosphere, the resulting GWP factor is not necessarily − 1 CO{sub 2}eq per kg CO{sub 2} stored. As an example, when biogenic CO{sub 2} from Norway Spruce biomass is stored in geological reservoirs with no leakage, we estimate a GWP of − 0.56 kg CO{sub 2}eq per kg CO{sub 2} stored (100 year TH) when albedo effects are also included. The large variance in GWPs across the range of

Consistent quantification of climate impacts due to biogenic carbon storage across a range of bio-product systems

International Nuclear Information System (INIS)

Guest, Geoffrey; Bright, Ryan M.; Cherubini, Francesco; Strømman, Anders H.

2013-01-01

Temporary and permanent carbon storage from biogenic sources is seen as a way to mitigate climate change. The aim of this work is to illustrate the need to harmonize the quantification of such mitigation across all possible storage pools in the bio- and anthroposphere. We investigate nine alternative storage cases and a wide array of bio-resource pools: from annual crops, short rotation woody crops, medium rotation temperate forests, and long rotation boreal forests. For each feedstock type and biogenic carbon storage pool, we quantify the carbon cycle climate impact due to the skewed time distribution between emission and sequestration fluxes in the bio- and anthroposphere. Additional consideration of the climate impact from albedo changes in forests is also illustrated for the boreal forest case. When characterizing climate impact with global warming potentials (GWP), we find a large variance in results which is attributed to different combinations of biomass storage and feedstock systems. The storage of biogenic carbon in any storage pool does not always confer climate benefits: even when biogenic carbon is stored long-term in durable product pools, the climate outcome may still be undesirable when the carbon is sourced from slow-growing biomass feedstock. For example, when biogenic carbon from Norway Spruce from Norway is stored in furniture with a mean life time of 43 years, a climate change impact of 0.08 kg CO 2 eq per kg CO 2 stored (100 year time horizon (TH)) would result. It was also found that when biogenic carbon is stored in a pool with negligible leakage to the atmosphere, the resulting GWP factor is not necessarily − 1 CO 2 eq per kg CO 2 stored. As an example, when biogenic CO 2 from Norway Spruce biomass is stored in geological reservoirs with no leakage, we estimate a GWP of − 0.56 kg CO 2 eq per kg CO 2 stored (100 year TH) when albedo effects are also included. The large variance in GWPs across the range of resource and carbon storage

Urticaria due to Urtica dioica in a neonate.

Science.gov (United States)

Uslu, Sinan; Bulbul, Ali; Diler, Betul; Bas, Evrim Kiray; Nuhoglu, Asiye

2011-03-01

Urticaria is one of the most common dermatoses during the childhood, but it is very rare in the neonates. A 17-day-old infant with a generalized urticaria was admitted to our pediatric emergency unit. The mother of the infant reported having applied water boiled with stinging nettle (Urtica dioica) onto her nipples twice a day (before and after each breastfeeding) for 2 days in order to heal her nipple cracks. Serum total immunoglobulin E (IgE) and specific IgE levels for stinging nettle were high in the infant and the mother. The rashes began to regress within the first day of the hospitalization and disappeared completely on the second day without treatment. The skin prick test with the water boiled with stinging nettle was positive for the infant with significant induration, but not for the mother. Conclusion Reporting the first urticaria case in newborns due to stinging nettle, the authors suggest that breastfeeding mothers should always consult a physician before using skincare products.

Fermentative hydrogen production by diverse microflora

International Nuclear Information System (INIS)

Baghchehsaraee, B.; Nakhla, G.; Karamanev, D.; Margaritis, A.

2009-01-01

'Full text': In this study of hydrogen production with activated sludge, a diverse bacterial source has been investigated and compared to microflora from anaerobic digester sludge, which is less diverse. Batch experiments were conducted at mesophilic (37 o C) and thermophilic (55 o C) temperatures. The hydrogen production yields with activated sludge at 37 o C and 55 o C were 0.25 and 0.93 mol H 2 /mol glucose, respectively. The maximum hydrogen production rates with activated sludge in both temperatures were 4.2 mL/h. Anaerobic digester sludge showed higher hydrogen production yields and rates at both mesophilic and thermophilic temperatures. The results of repeated batch experiments with activated sludge showed an increase in the hydrogen production during the consecutive batches. However, hydrogen production was not stable along the repeated batches. The observed instability was due to the formation of lactic acid and ethanol. (author)

Quenching effects in photon production

International Nuclear Information System (INIS)

Durand, M.

1989-01-01

Contraints on the photon production calculated by kinetic approaches are studied by means of sum-rules a finite temperature for simple quantum system. For the square-well potential the exact production rate is compared with its semi-classical limit in order to introduce the principle problem. For the scattering of hard spheres the photon production cross section is derived exactly by partial wave expansion. This serves to study the more realistic example of a gas of hard spheres. The corresponding kinetic photon production rates are found to violate the sum-rules, due to a singular behaviour at small gamma energies. Thus the hypothesis of incoherent free scattering is not valid in that range because of destructive interferences which quench the production rates significantly. For the application to nuclear collisions at intermediate energies these quenching effects are found to be important for gamma energies even up to a few hundred MeV. (orig.)

Workshop on induced Seismicity due to fluid injection/production from Energy-Related Applications

Energy Technology Data Exchange (ETDEWEB)

Majer, E.L.; Asanuma, Hiroshi; Rueter, Horst; Stump, Brian; Segall, Paul; Zoback, Mark; Nelson, Jim; Frohlich, Cliff; Rutledge, Jim; Gritto, Roland; Baria, Roy; Hickman, Steve; McGarr, Art; Ellsworth, Bill; Lockner, Dave; Oppenheimer, David; Henning, Peter; Rosca, Anca; Hornby, Brian; Wang, Herb; Beeler, Nick; Ghassemi, Ahmad; Walters, Mark; Robertson-Tait, Ann; Dracos, Peter; Fehler, Mike; Abou-Sayed, Ahmed; Ake, Jon; Vorobiev, Oleg; Julian, Bruce

2011-04-01

that was necessary not only to make fluid injections safe, but an economic asset, DOE organized a series of workshops. The first workshop was held on February 4, 2010, at Stanford University. A second workshop will be held in mid-2010 to address the critical elements of a 'best practices/protocol' that industry could use as a guide to move forward with safe implementation of fluid injections/production for energy-related applications, i.e., a risk mitigation plan, and specific recommendations for industry to follow. The objectives of the first workshop were to identify critical technology and research needs/approaches to advance the understanding of induced seismicity associated with energy related fluid injection/production, such that: (1) The risk associated with induced seismicity can be reduced to a level that is acceptable to the public, policy makers, and regulators; and (2) Seismicity can be utilized/controlled to monitor, manage, and optimize the desired fluid behavior in a cost effective fashion. There were two primary goals during the workshop: (1) Identify the critical roadblocks preventing the necessary understanding of human-induced seismicity. These roadblocks could be technology related (better imaging of faults and fractures, more accurate fluid tracking, improved stress measurements, etc.), research related (fundamental understanding of rock physical properties and geochemical fluid/rock interactions, development of improved constitutive relations, improved understanding of rock failure, improved data processing and modeling, etc.), or a combination of both. (2) After laying out the roadblocks the second goal was to identify technology development and research needs that could be implemented in the near future to address the above objectives.

Accelerating Net Terrestrial Carbon Uptake During the Warming Hiatus Due to Reduced Respiration

Science.gov (United States)

Ballantyne, Ashley; Smith, William; Anderegg, William; Kauppi, Pekka; Sarmiento, Jorge; Tans, Pieter; Shevliakova, Elena; Pan, Yude; Poulter, Benjamin; Anav, Alessandro;

Parameters affecting incorporation and by-product formation during the production of structured phospholipids by lipase-catalyzed acidolysis in solvent free system

DEFF Research Database (Denmark)

Vikbjerg, Anders Falk; Mu, Huiling; Xu, Xuebing

2005-01-01

By-product formation is a serious problem in the lipase-catalyzed acyl exchange of phospholipids (PL). By-products are formed due to parallel hydrolysis reactions and acyl migration in the reaction system. A clear elucidation of these side reactions is important for practical operation in order...... to minimize by-products during reaction. In the present study we examined the Lipozyme RM IM-catalyzed acidolysis for the production of structured phospholipids between phosphatidylcholine (PC) and caprylic acid in the solvent free system. A five-factor response surface design was used to evaluate...

Farmers, cooperatives, new food products

DEFF Research Database (Denmark)

Søgaard, Villy

Executive Summary 1. Innovation intensity varies by several orders of magnitude across economic sectors. According to the evidence presented in Chapter 1, this is mainly due to differences in the demand for innovation. Thus, the relatively low levels of product orientated R & D for the food sectors...... of most countries are consistent with the comparatively long penetration periods and low success rates experienced with many new food products. 2. Furthermore, the evidence suggests that the demand for innovation within the food sector is positively related to the degree of processing. 3. The constitutive...... of primary input in order to support capacity utilization at the primary level and thereby increase the earnings of the membership. 9. Input substitution serves to intensify the focus on the primary product supplied by the membership, which is liable to reduce incentives to produce combined food products. 10...

SUSTAINABLE PRODUCTION PACKAGES FOR ORGANIC TURMERIC

OpenAIRE

Somasundaram, Eagan; Shanthi, G.

2014-01-01

Turmeric (Curcuma longa L.), a perennial rhizomatous herb has been regarded as an important spice in Asian cuisine. India is called as the “Spice bowl of the world” as it produces variety of spices with quality. Though India leads in production of turmeric, but average productivity is very low due to imbalanced and suboptimal dose of chemical fertilizers, organic manure, bio – fertilizers and micronutrients (Kandiannan and Chandragiri, 2008). Since, turmeric is a nutrient responsive crop and ...

Use of product databases for risk assessment purposes

International Nuclear Information System (INIS)

Heinemeyer, Gerhard; Hahn, Axel

2005-01-01

Product information databases are important prerequisites for providing data to poison centers (PC) to give adequate advice in cases of poisonings and for preparation of statistics as annual reports. For risk assessment measures, they can help for exposure assessments and for priority setting. A product database is a set of information of product and substance names, compositions, and uses of products. Data are provided due to national regulations as well as to national and international agreements between industry, international associations, e.g. the European Association of Poison Centres and Clinical Toxicologists (EAPCCT), and clinical toxicology institutions. They have different contents, i.e. complete formulations, frame formulations, and material safety data sheets. For definite identification of products, the product name should be readily taken from the labels and must be similar to the names provided by electronic media as databases. Products should be classified according to their use. The first system that has been prepared for that purpose is the ATC classification for pharmaceuticals. For chemicals, several systems e.g. the WHO-IPCS classification code, exist; the EU technical guidance document for risk assessment of chemicals is mentioning use categories, and they are used on national levels as well. For risk assessment purposes, statistics of poisonings and other health hazards are important as well as information about exposure. Linking cases of poisonings with product data enables risk assessors to perform statistical evaluations about health effects due to product use categories which can be compared to product compositions. If products are categorized by their use, information about use characteristics, such as frequencies and durations, can be derived. Hence, product categories can be taken to characterize scenarios and thus help for model estimations of exposure and respective doses

Microbial reverse-electrodialysis chemical-production cell for acid and alkali production

KAUST Repository

Zhu, Xiuping

2013-06-01

A new type of bioelectrochemical system, called a microbial reverse-electrodialysis chemical-production cell (MRCC), was developed to produce acid and alkali using energy derived from organic matter (acetate) and salinity gradients (NaCl solutions representative of seawater and river water). A bipolar membrane (BPM) was placed next to the anode to prevent Cl- contamination and acidification of the anolyte, and to produce protons for HCl recovery. A 5-cell paired reverse-electrodialysis (RED) stack provided the electrical energy required to overcome the BPM over-potential (0.3-0.6 V), making the overall process spontaneous. The MRCC reactor produced electricity (908 mW/m2) as well as concentrated acidic and alkaline solutions, and therefore did not require an external power supply. After a fed-batch cycle, the pHs of the chemical product solutions were 1.65 ± 0.04 and 11.98 ± 0.10, due to the production of 1.35 ± 0.13 mmol of acid, and 0.59 ± 0.14 mmol of alkali. The acid- and alkali-production efficiencies based on generated current were 58 ± 3% and 25 ± 3%. These results demonstrated proof-of-concept acid and alkali production using only renewable energy sources. © 2013 Elsevier B.V.

UTILIZATION OF MINERAL FIBER WASTE IN THE PRODUCTION OF GYPSUM PRODUCTS

Directory of Open Access Journals (Sweden)

Solov'ev Vitaliy Nikolaevich

2018-01-01

Full Text Available Subject: the effectiveness of using compositions with the use of basalt fibers is proven, but the composition must be selected depending on the binder and additives chosen. Research objectives: we examine the possibility of waste recycling of basalt fiber production during manufacturing of modified gypsum composite material with improved characteristics. Materials and methods: as a raw material, a gypsum binder of Samara production was used. As a reinforcement additive, a disperse waste of basalt fiber production of Tver region was used. Studying characteristics of the gypsum binder and modified mixture, and also comparative analysis of these characteristics by average density, total porosity, strength in compression and flexure of the gypsum composite were carried out using standard techniques. Results: dependence of physical and mechanical properties of the modified gypsum material on the content of the basalt fiber additive is established. It was found that an increase in concentration of the additive requires an increased water content or additional use of plasticizer. Conclusions: modification of gypsum stone with a mineral basalt additive will increase the strength, density and durability of thin-walled gypsum products, and, consequently, the demand for products due to ensuring their high quality in transportation and installation.

Globally sustainable manganese metal production and use.

Science.gov (United States)

Hagelstein, Karen

2009-09-01

The "cradle to grave" concept of managing chemicals and wastes has been a descriptive analogy of proper environmental stewardship since the 1970s. The concept incorporates environmentally sustainable product choices-such as metal alloys utilized steel products which civilization is dependent upon. Manganese consumption is related to the increasing production of raw steel and upgrading ferroalloys. Nonferrous applications of manganese include production of dry-cell batteries, plant fertilizer components, animal feed and colorant for bricks. The manganese ore (high grade 35% manganese) production world wide is about 6 million ton/year and electrolytic manganese metal demand is about 0.7 million ton/year. The total manganese demand is consumed globally by industries including construction (23%), machinery (14%), and transportation (11%). Manganese is recycled within scrap of iron and steel, a small amount is recycled within aluminum used beverage cans. Recycling rate is 37% and efficiency is estimated as 53% [Roskill Metals and Minerals Reports, January 13, 2005. Manganese Report: rapid rise in output caused by Chinese crude steel production. Available from: http://www.roskill.com/reports/manganese.]. Environmentally sustainable management choices include identifying raw material chemistry, utilizing clean production processes, minimizing waste generation, recycling materials, controlling occupational exposures, and collecting representative environmental data. This paper will discuss two electrolytically produced manganese metals, the metal production differences, and environmental impacts cited to date. The two electrolytic manganese processes differ due to the addition of sulfur dioxide or selenium dioxide. Adverse environmental impacts due to use of selenium dioxide methodology include increased water consumption and order of magnitude greater solid waste generation per ton of metal processed. The use of high grade manganese ores in the electrolytic process also

Inclusive anomalous muon production in e+e- annihilation

International Nuclear Information System (INIS)

Feldman, G.J.; Bulos, F.; Lueke, D.; Abrams, G.S.; Alam, M.S.; Boyarski, A.M.; Breidenbach, M.; Dorfan, J.; Friedberg, C.E.; Fryberger, D.; Goldhaber, G.; Hanson, G.; Heile, F.B.; Jaros, J.A.; Kadyk, J.A.; Larsen, R.R.; Litke, A.M.; Lueth, V.; Madaras, R.J.; Morehouse, C.C.; Nguyen, H.K.; Paterson, J.M.; Perl, M.L.; Peruzzi, I.; Piccolo, M.; Pierre, F.M.; Pun, T.P.; Rapidis, P.; Richter, B.; Sadoulet, B.; Schwitters, R.F.; Tanenbaum, W.; Trilling, G.H.; Vannucci, F.; Whitaker, J.S.; Wiss, J.E.

1977-01-01

We present measurements of inclusive anomalous muon production in e + e - annihilations in three energy ranges. In all three ranges we observe a large anomalous muon production rate in two-prong events which is compatible with the expected decays of pairs of heavy leptons. In the highest energy range there is also appreciable anomalous muon production in multiprong events which, due to its magnitude and momentum dependence, must come in part from a source other than a heavy lepton

Combining information flow and physics-of-failure in mechatronic products

NARCIS (Netherlands)

Magniez, C.A.A.

2007-01-01

A continuous acceleration in the rate of technological development, shorter product life cycles, more intense competition due to maturing of markets and globalization, have forced firms to increasingly rely on new products for sales and profitability. However, reliability and quality management

Heavy flavor production from photons and hadrons

International Nuclear Information System (INIS)

Heusch, C.A.

1982-01-01

The present state of the production and observation of hadrons containing heavy quarks or antiquarks as valence constituents, in reactions initiated by real and (space-like) virtual photon or by hadron beams is discussed. Heavy flavor production in e + e - annihilation, which is well covered in a number of recent review papers is not discussed, and similarly, neutrino production is omitted due to the different (flavor-changing) mechanisms that are involved in those reactions. Heavy flavors from spacelike photons, heavy flavors from real photons, and heavy flavors from hadron-hadron collisions are discussed

The insurability of product recall in food supply chains

NARCIS (Netherlands)

Meuwissen, M.P.M.; Valeeva, N.I.; Velthuis, A.G.J.; Huirne, R.B.M.

2006-01-01

Insurers face growing difficulties with insuring food-related risks among others due to an increasing number of product recalls and an increasing amount of claims being pushed back into the chain. This paper focuses on the risk of product recall in dairy supply chains. The paper aims at providing

Mini Tuber Production in Potato Via Aeroponic System

Directory of Open Access Journals (Sweden)

Hussein Abdullah Ahmed AHMED

2018-02-01

Full Text Available The aeroponic production system is one of the new applications in soilless agriculture. This system is also an alternative seed production system for mini-tuber production of potato in terms of providing optimum growth conditions, enabling potato production to be free from diseases and pests and to make economic use of agricultural inputs. This system, which is independent of climatic conditions, has the advantage of improving the vegetative growth, delaying tuber formation, prolonging the vegetative period, increasing the tuber yield per plant and total tuber yield while decreasing the tuber weight. Due to the problems experienced in potato seedling tuber production in recent years, it emerged as an alternative production system for our country.

Acquired Localized Cutis Laxa due to Increased Elastin Turnover

DEFF Research Database (Denmark)

Nygaard, Rie Harboe; Maynard, Scott; Schjerling, Peter

2016-01-01

Cutis laxa is a rare disease characterized by abnormal skin wrinkling and laxity, due to decreased elastin synthesis or structural extracellular matrix defects. We have explored elastin metabolism in a case of adult onset cutis laxa localized to the upper body of a woman. For this purpose, we...... obtained skin biopsies from affected and unaffected skin areas of the patient and analyzed these with microscopy, polymerase chain reaction, western blotting and cell culture experiments. Skin from the affected area lacked elastin fibers in electron microscopy but had higher mRNA expression of elastin...... and total RNA. Levels of an apparent tropoelastin degradation product were higher in the affected area. Fibroblast cultures from the affected area were able to produce elastin and showed higher proliferation and survival after oxidative and UVB stress compared to fibroblasts from the unaffected area...

Oncogenic osteomalacia due to FGF23-expressing colon adenocarcinoma.

Science.gov (United States)

Leaf, David E; Pereira, Renata C; Bazari, Hasan; Jüppner, Harald

2013-03-01

Oncogenic osteomalacia, a paraneoplastic syndrome associated with hypophosphatemia due to increased urinary phosphate excretion, is caused by excessive synthesis and secretion of fibroblast growth factor 23 (FGF23), a phosphaturic hormone that is normally produced by osteocytes. Most cases of oncogenic osteomalacia have been associated with benign tumors of bone or soft tissue; however, whether malignant neoplasms can also produce and secrete FGF23 is currently unknown. The aim was to determine whether a malignant neoplasm could cause oncogenic osteomalacia through excessive production and secretion of FGF23. We describe an 80-year-old woman with stage IV colon adenocarcinoma who presented with severe hypophosphatemia (0.4 mg/dL; reference, 2.6-4.5 mg/dL). Fractional excretion of phosphate was 34% (reference, osteomalacia should be considered in the differential diagnosis for patients with a malignant tumor who present with hypophosphatemia.

The antioxidant properties of functional food ingredients used in the production of bakery and dairy products, their impact on quality and storageability of the product

Directory of Open Access Journals (Sweden)

I. Yu. Potoroko

2017-01-01

Full Text Available The article is devoted to the study of antioxidant activity (AOA food ingredients (FI containing fucoidan used as dressers bakery and dairy products, and evaluate their impact on the quality and persistence of the products. The use of FI possessing AOA in food production will ensure their functionality from the point of view of increasing the resistance of the body to noninfectious diseases. Objects of research were fucoidan from different manufacturers, as well as experimental samples of bread wheat and yoghurt-based products restored dry milk. Evaluation of antioxidant activity of FI based on fucoidan showed that the total concentration of antioxidants varies in significant range from (43,32 ± 0,2 to (69,17 ± 0,2 mg of ascorbic acid per 100 g was Also determined the effect of any FI on the organoleptic and physico-chemical quality parameters of bread and yogurt product in storage. The use of FI in the technology of bread contributes to the prolongation of periods of storage. Thus the deviation values increased humidity decreases by 1.3%, porosity – by 1.4%. In addition, we studied the temperature stability of fucoidan after baking bread. The residual content of his made up 0,196 ± 0.0015 mg/g when introducing 0.2 g. study of the effect of FI with fucoidan on the inhibition of the processes of molding bread confirmed the strong bactericidal properties of fucoidans, due to the high AOA. During storage of yoghurt for 120 hours was observed decrease in the activity of capacity operated of acidity that may be due to the action of FI.

GC/MS determination of monosaccharides in yogurt products

International Nuclear Information System (INIS)

Nam, Sang Kyu; Cheong, Won Jo

2000-01-01

Yogurt products are known to be effective for enhancing health and preventing diseases such as cancers. Such effects are generally believed to be due to actions of polysaccharides in yogurt products. In this study we have determined compositions of monosaccharides in hydrolysates of commercial yogurt products as the first step of understanding structures of polysaccharides. The yogurt products were ultracentrifuged, filtered, hydrolyzed in 1M sulfuric acid and neutralized. A porting of the solution was taken and evaporated to dryness, derivatized with TMSI (trimethyl- silylimidazole) and analyzed by GC/MS. We found that the monosaccharides were fructose, glucose, and galactose. Their compositions were variant among several yogurt products

GC/MS determination of monosaccharides in yogurt products

Energy Technology Data Exchange (ETDEWEB)

Nam, Sang Kyu; Cheong, Won Jo [Inha Univ., Incheon (Korea, Republic of)

2000-02-01

Yogurt products are known to be effective for enhancing health and preventing diseases such as cancers. Such effects are generally believed to be due to actions of polysaccharides in yogurt products. In this study we have determined compositions of monosaccharides in hydrolysates of commercial yogurt products as the first step of understanding structures of polysaccharides. The yogurt products were ultracentrifuged, filtered, hydrolyzed in 1M sulfuric acid and neutralized. A porting of the solution was taken and evaporated to dryness, derivatized with TMSI (trimethyl- silylimidazole) and analyzed by GC/MS. We found that the monosaccharides were fructose, glucose, and galactose. Their compositions were variant among several yogurt products.

Novel Method of Production Decline Analysis

Science.gov (United States)

Xie, Shan; Lan, Yifei; He, Lei; Jiao, Yang; Wu, Yong

2018-02-01

ARPS decline curves is the most commonly used in oil and gas field due to its minimal data requirements and ease application. And prediction of production decline which is based on ARPS analysis rely on known decline type. However, when coefficient index are very approximate under different decline type, it is difficult to directly recognize decline trend of matched curves. Due to difficulties above, based on simulation results of multi-factor response experiments, a new dynamic decline prediction model is introduced with using multiple linear regression of influence factors. First of all, according to study of effect factors of production decline, interaction experimental schemes are designed. Based on simulated results, annual decline rate is predicted by decline model. Moreover, the new method is applied in A gas filed of Ordos Basin as example to illustrate reliability. The result commit that the new model can directly predict decline tendency without needing recognize decline style. From arithmetic aspect, it also take advantage of high veracity. Finally, the new method improves the evaluation method of gas well production decline in low permeability gas reservoir, which also provides technical support for further understanding of tight gas field development laws.

An increased 18F radionuclide production

International Nuclear Information System (INIS)

Panico, M.; Salvadore, M.; Randazzo, G.; Roma, R.; Green, A.; Calicchio, G.F.

1999-01-01

In the 18 F daily preparation a diminished yield of radioisotopic production is often found. This fact, most times, is connected to the altered internal surface of the PEE and teflon lines for the 18 F transferring to the hot cells because of radiations. This anomaly is due to an H 2 18 O insufficient filling into the target. In fact a target foils bombardment causing the release of radioactive Ag+ ions sets in. These ions passing through the transferring line damage it. This problem has been solved by an increased H 2 18 O filling, from 0.7 to 1.3 mL. A further steady increasing in the 18 F production is due to the features of the new target: back plane : integrated in the silver flange; water cooling surface: enlarged with fins; target connections: high pressure fittings. In conclusion a careful filling of the new target has increased the fluorine-18 average daily production from 7.4 GBq to 18.5 GBq, using recovered water (time: thirty minutes; beam: 15 mA) and allows to replace teflon lines every year instead of every three months. (authors)

Terrestrial gamma ray flash production by lightning current pulses

OpenAIRE

İnan, Umran Savaş; Carlson, B. E.; Lehtinen, N. G.

2017-01-01

Terrestrial gamma ray flashes (TGFs) are brief bursts of gamma rays observed by satellites, typically in coincidence with detectable lightning. We incorporate TGF observations and the key physics behind current TGF production theories with lightning physics to produce constraints on TGF production mechanisms. The combined constraints naturally suggest a mechanism for TGF production by current pulses in lightning leader channels. The mechanism involves local field enhancements due to charge re...

Automation of production of concrete mix

Directory of Open Access Journals (Sweden)

Popello Egor

2017-01-01

Full Text Available Computer-aided design of concrete leads to a reduction in terms of production, the exclusion of product deficiencies, improve the quality of manufactured products. This approach allows to produce the concrete to exact physical and mechanical characteristics, which makes the design more reliable and economical. The software package will allow: to reduce the settlement time in the design of concrete mixture, to improve the efficiency of the staff of the laboratory building, to improve the quality of the concrete mix due to higher accuracy of calculations, to apply a flexible approach to the design of concrete mixture in question of introducing new chemical additives and their characteristics.

Activation product transport in fusion reactors

International Nuclear Information System (INIS)

Klein, A.C.; Vogelsang, W.F.

1984-01-01

Activated corrosion and neutron sputtering products will enter the coolant and/or tritium breeding material of fusion reactor power plants and experiments and cause personnel access problems. Radiation levels around plant components due to these products will cause difficulties with maintenance and repair operations throughout the plant. A computer code, RAPTOR, has been developed to determine the transport of these products in fusion reactor coolant/tritium breeding materials. Without special treatment, it is likely that fusion reactor power plant operators could experience dose rates as high as 8 rem per hour around a number of plant components after only a few years of operation. (orig.)

LHCb: Quarkonium Production at LHCb

CERN Multimedia

Frosini, M

2011-01-01

Despite large experimental and theoretical efforts, quarkonium production in hadronic collisions is not yet satisfactorily understood. Due to its forward geometry, LHCb has the unique opportunity to explore the field of quarkonium production at high rapidity, thus exploring new and unknown territory. We report he measurement of the double differential $J/\\psi, \\psi (2S)$ and $\\Upsilon$ cross section at LHCb with the data sample recorded by the LHCb experiment during the 2010 data taking. The $J/\\psi$ and $\\psi (2S)$ prompt components are separated from the products of b-hadrons decays using topological information. The results are compared with several theoretical models and other experiments. Preliminary results and prospects for the other quarkonium states will also be given.

Cost of illness due to typhoid Fever in pemba, zanzibar, East Africa.

Science.gov (United States)

Riewpaiboon, Arthorn; Piatti, Moritz; Ley, Benedikt; Deen, Jacqueline; Thriemer, Kamala; von Seidlein, Lorenz; Salehjiddawi, Mohammad; Busch, Clara Jana-Lui; Schmied, Wolfgang H; Ali, Said Mohammed; The Typhoid Economic Study Group GiDeok Pak Leon R Ochiai Mahesh K Puri Na Yoon Chang Thomas F Wierzba And John D Clemens

2014-09-01

The aim of this study was to estimate the economic burden of typhoid fever in Pemba, Zanzibar, East Africa. This study was an incidence-based cost-of-illness analysis from a societal perspective. It covered new episodes of blood culture-confirmed typhoid fever in patients presenting at the outpatient or inpatient departments of three district hospitals between May 2010 and December 2010. Cost of illness was the sum of direct costs and costs for productivity loss. Direct costs covered treatment, travel, and meals. Productivity costs were loss of income by patients and caregivers. The analysis included 17 episodes. The mean age of the patients, was 23 years (range=5-65, median=22). Thirty-five percent were inpatients, with a mean of 4.75 days of hospital stay (range=3-7, median=4.50). The mean cost for treatment alone during hospital care was US$ 21.97 at 2010 prices (US$ 1=1,430.50 Tanzanian Shilling─TSH). The average societal cost was US$ 154.47 per typhoid episode. The major expenditure was productivity cost due to lost wages of US$ 128.02 (83%). Our results contribute to the further economic evaluation of typhoid fever vaccination in Zanzibar and other sub-Saharan African countries.

Illness related wage and productivity losses: Valuing 'presenteeism'.

Science.gov (United States)

Zhang, Wei; Sun, Huiying; Woodcock, Simon; Anis, Aslam

2015-12-01

One source of productivity loss due to illness is the reduced "quantity" or "quality" of labor input while working, often referred to as presenteeism. Illness-related presenteeism has been found to be potentially more costly than absenteeism. To value presenteeism, existing methods use wages as a proxy for marginal productivity at the firm level. However, wage may not equal marginal productivity in some scenarios. One instance is when a job involves team production and perfect substitutes for workers are not readily available. Using a Canadian linked employer-employee survey (2001-2005), we test whether relative wage equals relative marginal productivity among team workers and non-team workers with different frequencies of presenteeism (reduction at work due to illness). For the pooled cross-sectional estimates (2001, 2003, 2005) we obtain 13,755 observations with 6842 unique workplaces. There are 6490 observations for the first differences estimates from the odd years and 5263 observations for the first differences estimates from 2001 to 2002 and 2003 to 2004. We find that in both small and large firms, team workers with frequent reductions at work are less productive but earn similarly compared with non-team workers without reductions. We also find that in small firms, workers with occasional work reductions are more productive than workers without reductions, but the reverse is true in large firms. The study findings partially support the literature stating that productivity loss resulting from employee presenteeism could exceed wages if team work is involved. Copyright © 2015 Elsevier Ltd. All rights reserved.

An Atypical Case of Methemoglobinemia due to Self-Administered Benzocaine

Directory of Open Access Journals (Sweden)

Thomas M. Nappe

2015-01-01

Full Text Available Acquired methemoglobinemia is an uncommon hemoglobinopathy that results from exposure to oxidizing agents, such as chemicals or medications. Although, as reported in the adult population, it happens most often due to prescribed medication or procedural anesthesia and not due to easily accessed over-the-counter medications, the authors will describe an otherwise healthy male adult with no known medical history and no prescribed medications, who presented to the emergency department reporting generalized weakness, shortness of breath, headache, dizziness, and pale gray skin. In addition, the patient reported that he also had a severe toothache for several days, which he had been self-treating with an over-the-counter oral benzocaine gel. Ultimately, the diagnosis of methemoglobinemia was made by clinical history, physical examination, and the appearance of chocolate-colored blood and arterial blood gas (ABG with cooximetry. After 2 mg/kg of intravenous methylene blue was administered, the patient had complete resolution of all signs and symptoms. This case illustrates that emergency physicians should be keenly aware of the potential of toxic hemoglobinopathy secondary to over-the-counter, nonprescribed medications. Discussion with patients regarding the dangers of inappropriate use of these medicines is imperative, as such warnings are typically not evident on product labels.

An Atypical Case of Methemoglobinemia due to Self-Administered Benzocaine.

Science.gov (United States)

Nappe, Thomas M; Pacelli, Anthony M; Katz, Kenneth

2015-01-01

Acquired methemoglobinemia is an uncommon hemoglobinopathy that results from exposure to oxidizing agents, such as chemicals or medications. Although, as reported in the adult population, it happens most often due to prescribed medication or procedural anesthesia and not due to easily accessed over-the-counter medications, the authors will describe an otherwise healthy male adult with no known medical history and no prescribed medications, who presented to the emergency department reporting generalized weakness, shortness of breath, headache, dizziness, and pale gray skin. In addition, the patient reported that he also had a severe toothache for several days, which he had been self-treating with an over-the-counter oral benzocaine gel. Ultimately, the diagnosis of methemoglobinemia was made by clinical history, physical examination, and the appearance of chocolate-colored blood and arterial blood gas (ABG) with cooximetry. After 2 mg/kg of intravenous methylene blue was administered, the patient had complete resolution of all signs and symptoms. This case illustrates that emergency physicians should be keenly aware of the potential of toxic hemoglobinopathy secondary to over-the-counter, nonprescribed medications. Discussion with patients regarding the dangers of inappropriate use of these medicines is imperative, as such warnings are typically not evident on product labels.

Product portfolio optimization based on substitution

DEFF Research Database (Denmark)

Myrodia, Anna; Moseley, A.; Hvam, Lars

2017-01-01

The development of production capabilities has led to proliferation of the product variety offered to the customer. Yet this fact does not directly imply increase of manufacturers' profitability, nor customers' satisfaction. Consequently, recent research focuses on portfolio optimization through...... substitution and standardization techniques. However when re-defining the strategic market decisions are characterized by uncertainty due to several parameters. In this study, by using a GAMS optimization model we present a method for supporting strategic decisions on substitution, by quantifying the impact...

Transplacentally transmitted congenital brucellosis due to brucella abortus biotype 1 in sprague-dawley rats

International Nuclear Information System (INIS)

Rahman, M.S.; Baek, B.K.

2008-01-01

In the investigation on the transplacentally transmitted congenital brucellosis due to Brucella abortus biotype 1 in Sprague- Dawley rats, neither any stillbirth, abortion or premature birth nor any abnormality of fetus was observed in the infected group or in the control group. B. abortus biotype was isolated from the fetus of infected rats only. Only one band of 498 base pair DNA was obtained in polymerase chain reaction products from DNA of the fetuses of infected SD rats. (author)

production lines

Directory of Open Access Journals (Sweden)

Jingshan Li

2000-01-01

Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

Recent advances on prebiotic lactulose production.

Science.gov (United States)

Sitanggang, Azis Boing; Drews, Anja; Kraume, Matthias

2016-09-01

Lactulose, a synthetic disaccharide, has received increasing interest due to its role as a prebiotic. The production of lactulose is important in the dairy industry, as it is regarded as a high value-added derivative of whey or lactose. The industrial production of lactulose is still mainly done by chemical isomerization. Due to concerns on the environmental and tedious separation processes, the enzymatic-based lactulose synthesis has been regarded as an interesting alternative. This work aims at comparing chemical and enzyme-catalyzed lactulose synthesis. With an emphasis on the latter one, this review discusses the influences of the critical operating conditions and the suited operation mode on the transgalactosylation of lactulose using microbial enzymes. As an update and supplement to other previous reviews, this work also summarizes the recent reports that highlighted the enzymatic isomerization of lactose using cellobiose 2-epimerase to produce lactulose at elevated yields.

[Dehydration due to "mouth broken"].

Science.gov (United States)

Meijler, D P M; van Mossevelde, P W J; van Beek, R H T

2012-09-01

Two children were admitted to a medical centre due to dehydration after an oral injury and the extraction of a tooth. One child complained of "mouth broken". Dehydration is the most common water-electrolyte imbalance in children. Babies and young children are prone to dehydration due to their relatively large body surface area, the high percentage extracellular fluid, and the limited ability of the kidneys to conserve water. After the removal ofa tooth, after an oral trauma or in case of oral discomfort, a child is at greater risk of dehydration by reduced fluid and food intake due to oral pain and/or discomfort and anxiety to drink. In those cases, extra attention needs to be devoted to the intake of fluids.

Activation product transport in fusion reactors

International Nuclear Information System (INIS)

Klein, A.C.

1983-01-01

Activated corrosion and neutron sputtering products will enter the coolant and/or tritium breeding material of fusion reactor power plants and experiments and cause personnel access problems. Radiation levels around plant components due to these products will cause difficulties with maintenance and repair operations throughout the plant. Similar problems are experienced around fission reactor systems. The determination of the transport of radioactive corrosion and neutron sputtering products through the system is achieved using the computer code RAPTOR. This code calculates the mass transfer of a number of activation products based on the corrosion and sputtering rates through the system, the deposition and release characteristics of various plant components, the neturon flux spectrum, as well as other plant parameters. RAPTOR assembles a system of first order linear differential equations into a matrix equation based upon the reactor system parameters. Included in the transfer matrix are the deposition and erosion coefficients, and the decay and activation data for the various plant nodes and radioactive isotopes. A source vector supplies the corrosion and neutron sputtering source rates. This matrix equation is then solved using a matrix operator technique to give the specific activity distribution of each radioactive species throughout the plant. Once the amount of mass transfer is determined, the photon transport due to the radioactive corrosion and sputtering product sources can be evaluated, and dose rates around the plant components of interest as a function of time can be determined. This method has been used to estimate the radiation hazards around a number of fusion reactor system designs

Butanol production from concentrated lactose/whey permeate: Use of pervaporation membrane to recover and concentrate product

Science.gov (United States)

In these studies butanol (acetone butanol ethanol, or ABE) was produced from concentrated lactose/whey permeate containing 211 gL-1 lactose. Fermentation of such a highly concentrated lactose solution was possible due to simultaneous product removal using a pervaporation membrane. In this system a p...

Study on the import dues system

Energy Technology Data Exchange (ETDEWEB)

Woo, Sung Keun [LG-Caltex Oil Co., Seoul (Korea)

2000-04-01

Since October 1979, Korea had implemented a petroleum project fund dues system to actively prepare for unstable international petroleum condition. However, as the size of operating a petroleum project fund was bigger and the influence of government on this fund became powerful, it was inserted in the government tax revenues as a {sup S}pecial account for energy and resource project{sup i}n March 1994 and its name was changed to import dues. In this study, it discusses the facts of import dues system, which exists only in Korea, and its policy directions since this system has been reviewed due to the economic development, liberalization of petroleum industry and inequity between alternative energy sources. 4 tabs.

BIOGAS PRODUCTION FROM CATCH CROPS

DEFF Research Database (Denmark)

Molinuevo-Salces, Beatriz; Larsen, Søren U.; Ahring, Birgitte Kiær

2014-01-01

-substrate in manure-based biogas plants and the profit obtained from the sale of biogas barely compensates for the harvest costs. A new agricultural strategy to harvest catch crops together with the residual straw of the main crop was investigated to increase the biomass and thereby the methane yield per hectare......Catch crop cultivation combined with its use for biogas production would increase renewable energy production in the form of methane, without interfering with the production of food and fodder crops. The low biomass yield of catch crops is the main limiting factor for using these crops as co...... biomass. Leaving the straw on the field until harvest of the catch crop in the autumn could benefit biogas production due to the organic matter degradation of the straw taking place on the field during the autumn months. This new agricultural strategy may be a good alternative to achieve economically...

Diphoton production in association with two bottom jets

Science.gov (United States)

Fäh, Daniel; Greiner, Nicolas

2017-11-01

We study the production of a photon pair in association with two bottom jets at the LHC. This process constitutes an important background to double Higgs production with the subsequent decay of the two Higgs bosons into a pair of photons and b-quarks respectively. We calculate this process at next-to-leading order accuracy in QCD and find that QCD corrections lead to a substantial increase of the production cross section due to new channels opening up at next-to-leading order and their inclusion is therefore inevitable for a reliable prediction. Furthermore, the approximation of massless b-quarks is scrutinized by calculating the process with both massless and massive b-quarks. We find that the massive bottom quark leads to a substantial reduction of the cross section where the biggest effect is, however, due to the use of a four-flavor PDF set and the corresponding smaller values for the strong coupling constant.

Diphoton production in association with two bottom jets

Energy Technology Data Exchange (ETDEWEB)

Faeh, Daniel; Greiner, Nicolas [Universitaet Zuerich, Physik Institut, Zuerich (Switzerland)

2017-11-15

We study the production of a photon pair in association with two bottom jets at the LHC. This process constitutes an important background to double Higgs production with the subsequent decay of the two Higgs bosons into a pair of photons and b-quarks respectively. We calculate this process at next-to-leading order accuracy in QCD and find that QCD corrections lead to a substantial increase of the production cross section due to new channels opening up at next-to-leading order and their inclusion is therefore inevitable for a reliable prediction. Furthermore, the approximation of massless b-quarks is scrutinized by calculating the process with both massless and massive b-quarks. We find that the massive bottom quark leads to a substantial reduction of the cross section where the biggest effect is, however, due to the use of a four-flavor PDF set and the corresponding smaller values for the strong coupling constant. (orig.)

Productivity loss at work; Health-related and work-related factors

NARCIS (Netherlands)

Heuvel, S.G. van den; Geuskens, G.A.; Hooftman, W.E.; Koppes, L.L.J.; Bossche, S.N.J. van den

2010-01-01

Introduction Productivity loss is an increasing problem in an aging working population that is decreasing in numbers. The aim of this study is to identify work-related and health-related characteristics associated with productivity loss, due to either sickness absence or reduced performance at work.

Decreased release of histamine and sulfidoleukotrienes by human peripheral blood leukocytes after wasp venom immunotherapy is partially due to induction of IL-10 and IFN-gamma production of T cells.

Science.gov (United States)

Pierkes, M; Bellinghausen, I; Hultsch, T; Metz, G; Knop, J; Saloga, J

1999-02-01

Recent studies provide evidence that venom immunotherapy (VIT) alters the pattern of cytokine production by inducing an allergen-specific T-cell shift in cytokine expression from TH2 (IL-4, IL-5) to TH1 (IFN-gamma) cytokines and also inducing the production of IL-10. This study was carried out to analyze whether these changes in cytokine production of T cells already observed 1 week after the initiation of VIT in subjects with wasp venom allergy also influence the reactivity of effector cells, such as mast cells and basophils. All subjects included in this study had a history of severe systemic allergic reactions to wasp stings and positive skin test responses with venom and venom-specific IgE in the sera. Peripheral blood leukocytes were isolated before and after the initiation of VIT (rush therapy reaching a maintenance dose of 100 microg venom injected subcutaneously within 1 week) and preincubated with or without addition of IL-10, IFN-gamma, IL-10 + IFN-gamma, anti-IL-10, or anti-IFN-gamma. After stimulation with wasp venom, histamine and sulfidoleukotriene release were assessed by ELISA and compared with spontaneous release and total histamine content. After the induction of VIT, venom-induced absolute and relative histamine and sulfidoleukotriene release were reduced. This was at least partially due to the induction of IFN-gamma and IL-10 production, because (1) neutralization of IL-10 and IFN-gamma by mAbs partially restored the release after the initiation of VIT and (2) the addition of exogenous IFN-gamma and IL-10 caused a statistically significant diminution of the venom-induced histamine and sulfidoleukotriene release before VIT. Depletion of CD2(+) T cells also restored the releasability after VIT. These data indicate that T cells (producing IL-10 and IFN-gamma after VIT) play a key role for the inhibition of histamine and sulfidoleukotriene release of effector cells.

Probabilistic approach for assessing infants' health risks due to ingestion of nanoscale silver released from consumer products.

Science.gov (United States)

Pang, Chengfang; Hristozov, Danail; Zabeo, Alex; Pizzol, Lisa; Tsang, Michael P; Sayre, Phil; Marcomini, Antonio

2017-02-01

Silver nanoparticles (n-Ag) are widely used in consumer products and many medical applications because of their unique antibacterial properties. Their use is raising concern about potential human exposures and health effects. Therefore, it is informative to assess the potential human health risks of n-Ag in order to ensure that nanotechnology-based consumer products are deployed in a safe and sustainable way. Even though toxicity studies clearly show the potential hazard of n-Ag, there have been few attempts to integrate hazard and exposure assessments to evaluate risks. The underlying reason for this is the difficulty in characterizing exposure and the lack of toxicity studies essential for human health risk assessment (HHRA). Such data gaps introduce significant uncertainty into the risk assessment process. This study uses probabilistic methods to assess the relative uncertainty and potential risks of n-Ag exposure to infants. In this paper, we estimate the risks for infants potentially exposed to n-Ag through drinking juice or milk from sippy cups or licking baby blankets containing n-Ag. We explicitly evaluate uncertainty and variability contained in available dose-response and exposure data in order to make the risk characterization process transparent. Our results showed that individual margin of exposures for oral exposure to sippy cups and baby blankets containing n-Ag exhibited minimal risk. Copyright © 2016. Published by Elsevier Ltd.

Production of thallium 201 for medical use

International Nuclear Information System (INIS)

Venikov, N.I.; Konyakhin, N.A.; Kozlova, M.D.; Volkova, N.M.

1986-01-01

An important product among the radiopharmaceuticals currently used in cardiology is T1 201 chloride, due to its nuclear-physical properties and its clinical value as a diagnostic tool. The authors explain and discuss the basic characteristics which determine the radiopharmaceutical quality of T1 201: its radiochemical purity and its chemical impurity content, which depend on the target-irradiation conditions - type of nuclear reaction, target material and design, particle energy, irradiation time - and the reprocessing technology. A production flow chart is presented which shows that ions are accelerated within a wide mass and energy range suitable for the production of T1 201 in different nuclear reactions. Cyclotron reconstruction for T1 201 production is discussed

Enzymatic production of ceramide from sphingomyelin

DEFF Research Database (Denmark)

Zhang, Long; Hellgren, Lars; Xu, Xuebing

Ceramide is the key intermediate in the biosynthesis of all complex sphingolipids. Due to its major role in maintaining the water-retaining properties of the epidermis, ceramide is of great commercial potential in cosmetic and pharmaceuticals such as hair and skin care products. Currently, chemical...... contains a ceramide moiety, is a ubiquitous component of animal cell membranes, and dairy products or by-products is a rich source of sphingomyelin. It has been verified that enzymatic modification of sphingomyelin is a feasible approach for production of ceramide. The reaction system has been optimized...... through system evaluation and the optimization of several important factors. Sphingomyelin hydrolysis proved to be more efficient in two-phase (water: organic solvent) system than in one-phase (water-saturated organic solvent) system. Phospholipase C from Clostridium perfringens is the tested enzyme which...

Kronecker Products on Preconditioning

KAUST Repository

Gao, Longfei

2013-08-01

Numerical techniques for linear systems arising from discretization of partial differential equations are nowadays essential for understanding the physical world. Among these techniques, iterative methods and the accompanying preconditioning techniques have become increasingly popular due to their great potential on large scale computation. In this work, we present preconditioning techniques for linear systems built with tensor product basis functions. Efficient algorithms are designed for various problems by exploiting the Kronecker product structure in the matrices, inherited from tensor product basis functions. Specifically, we design preconditioners for mass matrices to remove the complexity from the basis functions used in isogeometric analysis, obtaining numerical performance independent of mesh size, polynomial order and continuity order; we also present a compound iteration preconditioner for stiffness matrices in two dimensions, obtaining fast convergence speed; lastly, for the Helmholtz problem, we present a strategy to `hide\\' its indefiniteness from Krylov subspace methods by eliminating the part of initial error that corresponds to those negative generalized eigenvalues. For all three cases, the Kronecker product structure in the matrices is exploited to achieve high computational efficiency.

Microalgae: biofuel production

Directory of Open Access Journals (Sweden)

Babita Kumari

2013-04-01

Full Text Available In the present day, microalgae feedstocks are gaining interest in energy scenario due to their fast growth potential coupled with relatively high lipid, carbohydrate and nutrients contents. All of these properties render them an excellent source for biofuels such as biodiesel, bioethanol and biomethane; as well as a number of other valuable pharmaceutical and nutraceutical products. The present review is a critical appraisal of the commercialization potential of microalgae biofuels. The available literature on various aspects of microalgae for e.g. its cultivation, life cycle assessment, and conceptualization of an algal biorefinery, has been done. The evaluation of available information suggests the operational and maintenance cost along with maximization of oil-rich microalgae production is the key factor for successful commercialization of microalgae-based fuels.

Carbon dioxide production in animal houses

DEFF Research Database (Denmark)

Pedersen, Søren; Blanes-Vidal, Victoria; Joergensen, H.

2008-01-01

cellars are emptied regularly in a four weeks interval. Due to a high and variable carbon dioxide production in deep straw litter houses and houses with indoor storage of manure longer than four weeks, we do not recommend to calculate the ventilation flow based on the carbon dioxide concentration......This article deals with carbon dioxide production from farm animals; more specifically, it addresses the possibilities of using the measured carbon dioxide concentration in animal houses as basis for estimation of ventilation flow (as the ventilation flow is a key parameter of aerial emissions from...... animal houses). The investigations include measurements in respiration chambers and in animal houses, mainly for growing pigs and broilers. Over the last decade a fixed carbon dioxide production of 185 litres per hour per heat production unit, hpu (i.e. 1000 W of the total animal heat production at 20o...

Multiple ionization produced in Yb due to N-,Si- and Ti-ion impact

International Nuclear Information System (INIS)

Verma, P.

2000-01-01

Heavy ion induced inner shell ionization produces multiple vacancies in the outer shells (M, N etc.) simultaneous to vacancies in the inner-shells (viz. L-shell), which in turn create a very complicated electronic configuration. Three projectiles N 2+,3+ , Si 7+,8+ and Ti 10+,11+ ion beams having a range of 0.3 to 3.5 MeV/u were bombarded on a thin rare earth target of Yb. The recorded L X-ray spectra of Yb have been analyzed in the light of multiple ionization produced due to the heavy ion impact. The outer-shell vacancies acting as spectator vacancies cause a shift in the energy of the various L X-ray diagram lines. A comparison of the shifts in the energies of the various L X-ray transitions of Yb due to the impact of these projectiles, from standard values and that due to proton impact along with the deviation of the intensity ratios from single hole branching ratios, reveal a dependence of multiple ionization on the projectile atomic number (Z) and energy. A further comparison of the degree of multiple ionization produced in Yb, evident by the number of spectator vacancies produced due to the impact of projectiles with 7≤Z≤22 and overlapping MeV/u range lead to explicit conclusions regarding the probability of multiple vacancy production in outer shells simultaneous to a single L-shell vacancy for such projectile target combinations. (orig.)

Product with service, technology with business model

DEFF Research Database (Denmark)

Sakao, Tomohiko; McAloone, Tim C.

2011-01-01

Looking back over the last decade, the importance of an expanded understanding of engineering design has been shared within the engineering design community. Presented concepts and methods to support such expansion include Functional Product Development, Service Engineering, and Product/Service-S...... promising concept beyond PSS design; via an integrated development of technology and business model. This can be of particular interest for further research, especially due to its high freedom for designers....

Description of Latvian Metal Production and Processing Enterprises' Air Emissions

OpenAIRE

Pubule, J; Zahare, D; Blumberga, D

2010-01-01

The metal production and processing sector in Latvia has acquired a stable position in the national economy. Smelting of ferrous and nonferrous metals, production of metalware, galvanisation, etc. are developed in Latvia. The metal production and processing sector has an impact on air quality due to polluting substances which are released in the air from metal treatment processes. Therefore it is necessary to determine the total volume of emissions produced by the metal production and process...

Medication of Production Animals – Cure of Malfunctioning Animals or Production Systems?

Directory of Open Access Journals (Sweden)

Chrièl Mariann

2003-03-01

Full Text Available Medication is used in all intensive animal productions. However, the increasing problems with resistant bacteria in all animal productions and in humans are supported by a number of reports. Special attention is given to the risk for transmitting food-borne (multi resistant zoonotic agents to humans due to failure in antibiotic treatment resulting in lower cure rates or higher case fatality rates. The use of medication in humans per se is capable of selecting for resistance in human pathogens. Nevertheless, the amount of used medication/antimicrobials in treatment of Danish production animals goes far beyond the amount used for human consumption. The increase in consumption has not been followed by a similarly increased mortality, e.g. illustrated by the number of rendered animals, increased use of injection medicine for veterinary treatments of diseased animals, or increased number of remarks on the carcasses from the slaughterhouses. Medication in animal production is facing its limits and relevant economic alternatives have to be developed. The strategy for the future must concentrate on using medication only for clinically diseased animals and not as a strategic treatment of the whole herd in order to maximise growth and camouflage of suboptimal production systems and insufficient management.

Green productivity analysis at tofu production (case study of UD Gudange Tahu Takwa Kediri)

Science.gov (United States)

Septifani, R.; Deoranto, P.; Jannah, I.

2018-03-01

UD. Gudang Tahu Takwa (GTT) is one of tofu Small and Medium Enterprises (SMEs). In Kediri, there are many tofu SMEs, each of them competes to survive in the market by improving and increasing productivity. The purposes of this study were to determine the most influenced factors towards productivity level and to determine the best wastewater treatment alternatives to be applied. An approach to improve productivity while lowering environmental impacts is known as Green Productivity (GP). The GP approach can be applied by using several tools such as mass balance, causal diagram, Environmental Performance Indicator (EPI), and Net Present Value (NPV). The results show the lowest productivity was washing process with the value of 17%. The EPI index total was -3.94 indicating that the environmental performance was still under the quality standard. The findings further suggested two alternatives to be implemented to improve productivity level, include replacement of suppliers and procurement of filtration equipment. The most influenced factor on productivity level was the volume of wastewater generated. Therefore, the second alternative was selected, due to its implementation could increase the productivity level of washing process by 79%, increase the EPI index to -3,00 and reduce the NPV value to IDR 1,582,204. The suggestion from this research is that UD GTT should buy the filtering equipment, and then applied it to treating the wastewater.

Assessment of radiological problems due to natural radionuclides, in units of exploration and production of petroleum

International Nuclear Information System (INIS)

Matta, Luiz E.S.C.; Godoy, Jose M.O.; Reis, Maria C.D.; Pinto, Renato S.M.

2001-01-01

This paper describes the study of the occurrence of technologically enhanced natural radioactive material in petroleum offshore platforms of Campos Basin. The material found in drums that came from the platforms and scales from production tubes were analyzed for characterization and determination of its specific activity. There were made measurement of the dose rate in several platforms and radon concentration in onshore and offshore facilities. The results were compared with limits of the Brazilian legislation and international recommendations and actions were proposed to be implemented to assure the workers and environment protection. The results show that with the adequate actions the workers will not receive exposures above the public limits according international recommendations. (author)

ADDED VALUE AS EFFICIENCY CRITERION FOR INDUSTRIAL PRODUCTION PROCESS

Directory of Open Access Journals (Sweden)

L. M. Korotkevich

2016-01-01

Full Text Available Literary analysis has shown that the majority of researchers are using classical efficiency criteria for construction of an optimization model for production process: profit maximization; cost minimization; maximization of commercial product output; minimization of back-log for product demand; minimization of total time consumption due to production change. The paper proposes to use an index of added value as an efficiency criterion because it combines economic and social interests of all main interested subjects of the business activity: national government, property owners, employees, investors. The following types of added value have been considered in the paper: joint-stock, market, monetary, economic, notional (gross, net, real. The paper makes suggestion to use an index of real value added as an efficiency criterion. Such approach permits to bring notional added value in comparable variant because added value can be increased not only due to efficiency improvement of enterprise activity but also due to environmental factors – excess in rate of export price increases over rate of import growth. An analysis of methods for calculation of real value added has been made on a country-by-country basis (extrapolation, simple and double deflation. A method of double deflation has been selected on the basis of the executed analysis and it is counted according to the Laspeyires, Paasche, Fischer indices. A conclusion has been made that the used expressions do not take into account fully economic peculiarities of the Republic of Belarus: they are considered as inappropriate in the case when product cost is differentiated according to marketing outlets; they do not take account of difference in rate of several currencies and such approach is reflected in export price of a released product and import price for raw material, supplies and component parts. Taking this into consideration expressions for calculation of real value added have been specified

A Label Correcting Algorithm for Partial Disassembly Sequences in the Production Planning for End-of-Life Products

Directory of Open Access Journals (Sweden)

Pei-Fang (Jennifer Tsai

2012-01-01

Full Text Available Remanufacturing of used products has become a strategic issue for cost-sensitive businesses. Due to the nature of uncertain supply of end-of-life (EoL products, the reverse logistic can only be sustainable with a dynamic production planning for disassembly process. This research investigates the sequencing of disassembly operations as a single-period partial disassembly optimization (SPPDO problem to minimize total disassembly cost. AND/OR graph representation is used to include all disassembly sequences of a returned product. A label correcting algorithm is proposed to find an optimal partial disassembly plan if a specific reusable subpart is retrieved from the original return. Then, a heuristic procedure that utilizes this polynomial-time algorithm is presented to solve the SPPDO problem. Numerical examples are used to demonstrate the effectiveness of this solution procedure.

Structural modeling of the production quality as a multidimensional object of measurement and control

OpenAIRE

Зубрецкая, Наталья Анатольевна

2015-01-01

The structural-analytical models of product quality as a multidimensional process of evaluation, measurement and control are developed. The product quality is represented as a multi-factor, multi-criteria and multi-parameter estimation object. This structural formalization of quality demonstrates the multidimensional qualities: comprehensiveness due to a set of environmental factors; multicriteriality due collectively evaluated quality criteria; multiparameter information models that describe...

Radionuclides in food and the radiation exposure due to ingestion

International Nuclear Information System (INIS)

Michel, Rolf

2015-01-01

As a consequence of the reactor accidents in Fukushima Daiichi high amounts of radioactive iodine and cesium isotopes were released into the terrestrial and marine Japanese environment. The largest release occurred on March 15, 2011 as a consequence of the containment failure of unit 2. Due to the meteorological conditions large area fallout occurred in the district of Fukushima. Other prefectures in the north of Japan were also contaminated. As a consequence of the high surface contamination the dose limits for drinking water, milk and milky products and food were increased to 200 Bq/kg.It turned out that the contamination of rice was marginal, the contamination of predatory fish higher than that of non-predatory fish. A systematic investigation of food samples could allow a better estimation of ingestion induced exposure.

Scenarios for future biodiversity loss due to multiple drivers reveal conflict between mitigating climate change and preserving biodiversity

International Nuclear Information System (INIS)

Powell, Thomas W R; Lenton, Timothy M

2013-01-01

We assess the potential for future biodiversity loss due to three interacting factors: energy withdrawal from ecosystems due to biomass harvest, habitat loss due to land-use change, and climate change. We develop four scenarios to 2050 with different combinations of high or low agricultural efficiency and high or low meat diets, and use species–energy and species–area relationships to estimate their effects on biodiversity. In our scenarios, natural ecosystems are protected except when additional land is necessary to fulfil the increasing dietary demands of the global population. Biomass energy with carbon capture and storage (BECCS) is used as a means of carbon dioxide removal (CDR) from the atmosphere (and offsetting fossil fuel emissions). BECCS is based on waste biomass, with the addition of bio-energy crops only when already managed land is no longer needed for food production. Forecast biodiversity loss from natural biomes increases by more than a factor of five in going from high to low agricultural efficiency scenarios, due to destruction of productive habitats by the expansion of pasture. Biodiversity loss from energy withdrawal on managed land varies by a factor of two across the scenarios. Biodiversity loss due to climate change varies only modestly across the scenarios. Climate change is lowest in the ‘low meat high efficiency’ scenario, in which by 2050 around 660 million hectares of pasture are converted to biomass plantation that is used for BECCS. However, the resulting withdrawal of energy from managed ecosystems has a large negative impact on biodiversity. Although the effects of energy withdrawal and climate change on biodiversity cannot be directly compared, this suggests that using bio-energy to tackle climate change in order to limit biodiversity loss could instead have the opposite effect. (letter)

Resistant starch in cassava products

Directory of Open Access Journals (Sweden)

Bruna Letícia Buzati Pereira

2014-06-01

Full Text Available Found in different foods, starch is the most important source of carbohydrates in the diet. Some factors present in starchy foods influence the rate at which the starch is hydrolyzed and absorbed in vivo. Due the importance of cassava products in Brazilian diet, the objective of this study was to analyze total starch, resistant starch, and digestible starch contents in commercial cassava products. Thirty three commercial cassava products from different brands, classifications, and origin were analyzed. The method used for determination of resistant starch consisted of an enzymatic process to calculate the final content of resistant starch considering the concentration of glucose released and analyzed. The results showed significant differences between the products. Among the flours and seasoned flours analyzed, the highest levels of resistant starch were observed in the flour from Bahia state (2.21% and the seasoned flour from Paraná state (1.93%. Starch, tapioca, and sago showed levels of resistant starch ranging from 0.56 to 1.1%. The cassava products analyzed can be considered good sources of resistant starch; which make them beneficial products to the gastrointestinal tract.

Mechanisms of multiple production processes

International Nuclear Information System (INIS)

Dremin, I.M.

1977-01-01

Theoretical approaches to multiple production processes are discussed. A large number of models proceeds from the notion about common excited system produced by colliding hadrons. This class of models includes the hydrodynamical, statistical, thermodynamical and statistical bootstrap models. Sometimes the production process is due to excitation and decay of two colliding particles. The fragmentation bremsstrahlung and inelastic diffraction models belong to this group. The largest group of models describes the multiple production process as a result of formation of many excited centers. The typical example is the multiperipheral model. An interesting direction is given by the attempts to interrelate the mechanism of multiple production with internal structure of particles that is with their constituents (C-group)'-quarks, gluons, etc. Besides the models there are phenomenological (p group) attempts to connect different features of multiple production. Experimental data indicate the existence of leading and pionization particles thus giving an evidence for applications of different models. The data about increase of total and inclusive cross sections, the behaviour of the mean multiplicity and correlations at high energies provide a clue for further development of multiple production theory

Alcohol-flavoured tobacco products.

Science.gov (United States)

Jackler, Robert K; VanWinkle, Callie K; Bumanlag, Isabela M; Ramamurthi, Divya

2018-05-01

In 2009, the Food and Drug Administration (FDA) banned characterising flavours in cigarettes (except for menthol) due to their appeal to teen starter smokers. In August 2016, the agency deemed all tobacco products to be under its authority and a more comprehensive flavour ban is under consideration. To determine the scope and scale of alcohol-flavoured tobacco products among cigars & cigarillos, hookahs and electronic cigarettes (e-cigarettes). Alcohol-flavoured tobacco products were identified by online search of tobacco purveyors' product lines and via Google search cross-referencing the various tobacco product types versus a list of alcoholic beverage flavours (eg, wine, beer, appletini, margarita). 48 types of alcohol-flavoured tobacco products marketed by 409 tobacco brands were identified. Alcohol flavours included mixed drinks (n=25), spirits (11), liqueurs (7) and wine/beer (5). Sweet and fruity tropical mixed drink flavours were marketed by the most brands: piña colada (96), mojito (66) and margarita (50). Wine flavours were common with 104 brands. Among the tobacco product categories, brands offering alcohol-flavoured e-cigarettes (280) were most numerous, but alcohol-flavoured products were also marketed by cigars & cigarillos (88) and hookah brands (41). Brands by major tobacco companies (eg, Philip Morris, Imperial Tobacco) were well represented among alcohol-flavoured cigars & cigarillos with five companies offering a total of 17 brands. The widespread availability of alcohol-flavoured tobacco products illustrates the need to regulate characterising flavours on all tobacco products. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Heterogeneity in Preferences and Productivity

DEFF Research Database (Denmark)

Gørtz, Mette

This paper discusses the determinants of the retirement decision and the implications of retirement on economic well-being. The main contribution of the paper is to formulate the role of individual heterogeneity explicitly. We argue that individual heterogeneity in 1) productivity of market work...... choices of expenditure, household production and leisure for people in and around retirement. The unobserved individual heterogeneity factor is isolated by comparing cross-sectional evidence and panel data estimates of the effects of retirement on consumption and time allocation. Based on cross......-section data, we can identify a difference in consumption due to retirement status, but when the panel nature of the data is exploited, the effect of retirement on consumption is small and insignificant. Moreover, the analyses point at a large positive effect of retirement on household production. Our results...

Negative ion production by laser ablation

Energy Technology Data Exchange (ETDEWEB)

Wada, Motoi [Doshisha Univ., Tanabe, Kyoto (Japan). Faculty of Engineering; Sasao, Mamiko

1997-02-01

The status of the development of Li{sup -} production by generating a neutral Li flux with an intense radiation of a laser beam onto the surface of Li metal has been reported. The experimental apparatus was arranged to detect a mass separated Li{sup +} and Li{sup -} ion beams. A Li sputtering probe, immersed in the extraction region of a compact (6cm diam. 7cm long) magnetic multipole ion source was irradiated with a Nd-YAG laser of 0.4 J/pulse. The production of mass-separated positive ions of Li by laser irradiation has been confirmed, but the production of Li{sup -} has not been confirmed yet due to the noise caused by a temporal discharge. (author)

Production processes at extremely high energies

CERN Document Server

Gastmans, R; Wu, Tai Tsun

2013-01-01

The production processes are identified that contribute to the rise of the total cross section in proton-proton scattering at extremely high energies, s->~. At such energies, the scattering can be described by a black disk (completely absorptive) with a radius expanding logarithmically with energy surrounded by a gray fringe (partially absorptive). For the leading term of (lns)^2 in the increasing total cross section, the gray fringe is neglected, and geometrical optics is generalized to production processes. It is known that half of the rise in the total cross section is due to elastic scattering. The other half is found to originate from the production of jets with relatively small momenta in the center-of-mass system.

Dosimetric aspects of radiation processing of food and allied products

International Nuclear Information System (INIS)

Sharma, G.; Bhat, R.M.; Bhatt, B.C.

2010-01-01

Full text: Gamma radiation processing in the last 4-5 decades is continuously gaining importance in processing of a wide variety of products, as it can modify physical, chemical and biological properties of the materials, including food and allied products on industrial scale due its inherent qualities like ease of processing in finally packaged form, eco-friendly nature and other obvious reasons over conventional means of processing. Food and allied products are either from agricultural produce or animal origin; they get easily contaminated from soil during harvesting, handling, processing, environment conditions, storage and transport from various types of micro-organisms including pathogens. In many countries it is mandatory to bring down the population of micro-organisms to an acceptable level and complete elimination of pathogens before such products are accepted for human or animal consumption. Processing of food and allied products by radiation has its own challenges due to wider public acceptance of irradiated food, a wide range, 0.25-50kGy, of absorbed dose requirements for different category of such products and purposes, use of a variety of packaging materials in different shapes and sizes and because of its perishable nature. More than 50 countries including India in the world have accepted radiation processing of food and allied products by radiation. Dosimetry is an important aspect of radiation processing, whether it is food or allied product. Uniformity in dose delivered to these products depends on several factors such as product carrier to source frame alignment, product carrier and product/tote box design, product loading pattern, attenuation due to product thickness, product bulk density that varies from 0.1-1.0 kg/l and the plant design whether during processing product overlaps the source or otherwise. In this presentation dosimetric aspects of radiation processing of food and allied products and problems associated with dosimetry of such

Lost water and nitrogen resources due to EU consumer food waste

Science.gov (United States)

Vanham, D.; Bouraoui, F.; Leip, A.; Grizzetti, B.; Bidoglio, G.

2015-08-01

The European Parliament recently called for urgent measures to halve food waste in the EU, where consumers are responsible for a major part of total waste along the food supply chain. Due to a lack of data on national food waste statistics, uncertainty in (consumer) waste quantities (and the resulting associated quantities of natural resources) is very high, but has never been previously assessed in studies for the EU. Here we quantify: (1) EU consumer food waste, and (2) associated natural resources required for its production, in term of water and nitrogen, as well as estimating the uncertainty of these values. Total EU consumer food waste averages 123 (min 55-max 190) kg/capita annually (kg/cap/yr), i.e. 16% (min 7-max 24%) of all food reaching consumers. Almost 80%, i.e. 97 (min 45-max 153) kg/cap/yr is avoidable food waste, which is edible food not consumed. We have calculated the water and nitrogen (N) resources associated with avoidable food waste. The associated blue water footprint (WF) (the consumption of surface and groundwater resources) averages 27 litre per capita per day (min 13-max 40 l/cap/d), which slightly exceeds the total blue consumptive EU municipal water use. The associated green WF (consumptive rainwater use) is 294 (min 127-max 449) l/cap/d, equivalent to the total green consumptive water use for crop production in Spain. The nitrogen (N) contained in avoidable food waste averages 0.68 (min 0.29-max 1.08) kg/cap/yr. The food production N footprint (any remaining N used in the food production process) averages 2.74 (min 1.02-max 4.65) kg/cap/yr, equivalent to the use of mineral fertiliser by the UK and Germany combined. Among all the food product groups wasted, meat accounts for the highest amounts of water and N resources, followed by wasted cereals. The results of this study provide essential insights and information on sustainable consumption and resource efficiency for both EU policies and EU consumers.

The availability of processed fruit products and their contents of ...

African Journals Online (AJOL)

fruit, poverty and post-harvest losses due to lack of skills for processing and storage. The objectives of this research were to survey household consumption of foods especially processed fruit products in Nairobi, and analyze nutritional quality of processed fruit products. Three estates representing different income groups ...

Features communikations media products and value system of teens

OpenAIRE

Гречаник, М. І.

2014-01-01

We investigate the genesis of the features of the relationship of media products and values as a teenager in the light of current trends in contemporary global information society, found that media products can influence the formation and development of personal values yk adolescence, due to physiological characteristics age. Media products meets the needs of adolescents and penetrates the subconscious, thus affecting the value system, which can lead to deformation of values as a teenager fal...

Health and societal effects from exposure to fragranced consumer products.

Science.gov (United States)

Steinemann, Anne

2017-03-01

Fragranced consumer products-such as air fresheners, cleaning supplies, and personal care products- pervade society. This study investigated the occurrence and types of adverse effects associated with exposure to fragranced products in Australia, and opportunities for prevention. Data were collected in June 2016 using an on-line survey with a representative national sample ( n  = 1098). Overall, 33% of Australians report health problems, such as migraine headaches and asthma attacks, when exposed to fragranced products. Of these health effects, more than half (17.1%) could be considered disabling under the Australian Disability Discrimination Act. Additionally, 7.7% of Australians have lost workdays or a job due to illness from fragranced product exposure in the workplace, 16.4% reported health problems when exposed to air fresheners or deodorizers, 15.3% from being in a room after it was cleaned with scented products, and 16.7% would enter but then leave a business as quickly as possible due to fragranced products. About twice as many respondents would prefer that workplaces, health care facilities and professionals, hotels, and airplanes were fragrance-free rather than fragranced. While 73.7% were not aware that fragranced products, even ones called green and organic, emitted hazardous air pollutants, 56.3% would not continue to use a product if they knew it did. This is the first study in Australia to assess the extent of adverse effects associated with exposure to common fragranced products. It provides compelling evidence for the importance and value of reducing fragranced product exposure in order to reduce and prevent adverse health effects and costs.

Monitoring and control of protein production in fungi

DEFF Research Database (Denmark)

Schalén, Martin

: • How is protein production affected on a single cell level due to environmental stress factors? • How can we improve heterologous protein production in filamentous fungi, and how does production in Aspergillus nidulans compare to protein production in the industrially exploited Aspergillus niger...... stress elements on the production of heterologous proteins in S. cerevisiae is investigated. A fluorescent reporter strain, producing an intracellular protein linked to tagRFP from the glycolytic PGK1 promoter is constructed. This strain is used to monitor the level of production in each cell when...... exposed to environmental stress. The cells are grown in shake flasks as well as bioreactors and protein levels are analyzed by flow cytometry. It is demonstrated that the fluorescent reporter can be used to study the effects on stress elements on a population basis. Production of the protein was affected...

TECHNICAL AND ORGANIZATIONAL IMPROVEMENTS OF PACKAGING PRODUCTION PROCESS

Directory of Open Access Journals (Sweden)

Anna Rudawska

2016-06-01

Full Text Available Due to customer driven economies, today’s world markets are characterized by high fluctuations in market demand and the frequent arrival of new technologies and new products. To stay competitive in such markets manufacturing companies require continuous improvements both in technical and organizational areas of their activity. The paper presents results of the diagnosis provided in the manufacturing area of the company producing cardboard packages and recommendations to make the production process more efficient. Especially, among the proposed technical and organizational recommendations the most important ones are: automation of certain elements of the production process and changes in production plant layout.

A comparison of due-date selection rules

NARCIS (Netherlands)

Baker, K.R.; Bertrand, J.W.M.

1981-01-01

In sequencing and scheduling models it is usually assumed that due dates represent exogeneous information. In many practical settings, however, due dates can be discretionary, or at least negotiable. Relatively few studies have incorporated discretionary due dates, and even then the rules proposed

Modelling of nitric acid production in the Advanced Cold Process Canister due to irradiation of moist air

International Nuclear Information System (INIS)

Henshaw, J.

1994-01-01

This report summarises the work performed for SKB of Sweden on the modelling of nitric acid production in the gaseous environment of the Advanced Cold Process Canister (ACPC). The model solves the simultaneous chemical rate equations describing the radiation chemistry of He/Ar/N 2 /O 2 /H 2 O gas mixture, involving over 200 chemical reactions. The amount of nitric acid produced as a function of time for typical ACPC conditions has been calculated using the model and the results reported. 11 refs, 11 figs, 1 tab

Optimization of Substrate Feeding for Enzymatic Biodiesel Production

DEFF Research Database (Denmark)

Price, Jason Anthony; Huusom, Jakob Kjøbsted; Nordblad, Mathias

2013-01-01

to be effective in mitigating the effects of substrate inhibition. Using enzymatic biodiesel production as a case study, the volumetric productivity of the reactor is increased while minimizing inactivation of the enzyme due to the alcohol. This is done by using a simple optimization routine where the substrate...... (both the vegetable oil and alcohol) feed rate/concentration is manipulated simultaneously. The results of the simulation were tested in the laboratory and are sufficiently positive to suggest the implementation of a feeding strategy for large scale enzymatic biodiesel production...

Multi-Product Microalgae Biorefineries: From Concept Towards Reality.

Science.gov (United States)

't Lam, G P; Vermuë, M H; Eppink, M H M; Wijffels, R H; van den Berg, C

2018-02-01

Although microalgae are a promising biobased feedstock, industrial scale production is still far off. To enhance the economic viability of large-scale microalgae processes, all biomass components need to be valorized, requiring a multi-product biorefinery. However, this concept is still too expensive. Typically, downstream processing of industrial biotechnological bulk products accounts for 20-40% of the total production costs, while for a microalgae multi-product biorefinery the costs are substantially higher (50-60%). These costs are high due to the lack of appropriate and mild technologies to access the different product fractions such as proteins, carbohydrates, and lipids. To reduce the costs, simplified processes need to be developed for the main unit operations including harvesting, cell disruption, extraction, and possibly fractionation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Compaction of PDMS due to proton beam irradiation

International Nuclear Information System (INIS)

Szilasi, S.Z.; Huszank, R.; Rajta, I.; Kokavecz, J.

2011-01-01

Complete text of publication follows. This work is about the detailed investigation of the changes of the surface topography, the degree of compaction/shrinkage and its relation to the irradiation fluence and the structure spacing in poly(dimethylsiloxane) (PDMS) patterned with 2 MeV proton microbeam. Sylgard 184 kit (Dow-Corning) was used to create the PDMS samples. The density of the PDMS samples was determined with pycnometer. The penetration depth for 2 MeV protons is ∼85 μm, the PDMS layer was ∼95 μm thick, so the incident protons stop in the PDMS, they do not reach the substrate. The irradiations have been performed at the nuclear microprobe facility at ATOMKI. The irradiated periodic structures consisted of parallel lines with different widths and spacing. To achieve different degrees of compaction, each structure was irradiated with five different fluences. The surface topography, the phase modification of the surface, and the connection between them were revealed using an atomic force microscope (AFM PSIA XE 100). The shrinkage data were obtained from the topography images. The structures with different line widths and spacing show different degrees of compaction as a function of irradiation fluence. By plotting them in the same graph (Fig. 1) it is clearly seen that the degree of compaction depends on both the irradiation fluence and the distance of the structures. The fluence dependence of the compaction can be explained with the chemical changes of PDMS. When an energetic ion penetrates through the material it scissions the polymer chain, whereupon among other things volatile products form. In the case of PDMS, these are mainly hydrogen, methane and ethane gases that can be released from PDMS. The irradiated volume shrinks due to significant structural change during which silicate derivatives (SiO x ) are formed. The phase change and the corresponding surface topography was compared and studied at all applied irradiation fluences. It was concluded

Human health risk assessment of pharmaceuticals and personal care products in plant tissue due to biosolids and manure amendments, and wastewater irrigation.

Science.gov (United States)

Prosser, R S; Sibley, P K

2015-02-01

Amending soil with biosolids or livestock manure provides essential nutrients in agriculture. Irrigation with wastewater allows for agriculture in regions where water resources are limited. However, biosolids, manure and wastewater have all been shown to contain pharmaceuticals and personal care products (PPCPs). Studies have shown that PPCPs can accumulate in the tissues of plants but the risk that accumulated residues may pose to humans via consumption of edible portions is not well documented. This study reviewed the literature for studies that reported residues of PPCPs in the edible tissue of plants grown in biosolids- or manure-amended soils or irrigated with wastewater. These residues were used to determine the estimated daily intake of PPCPs for an adult and toddler. Estimated daily intake values were compared to acceptable daily intakes to determine whether PPCPs in plant tissue pose a hazard to human health. For all three amendment practices, the majority of reported residues resulted in hazard quotients plants to concentrations of PPCPs that would not be considered relevant based on concentrations reported in biosolids and manure or unrealistic methods of exposure, which lead to artificially elevated plant residues. Our assessment indicates that the majority of individual PPCPs in the edible tissue of plants due to biosolids or manure amendment or wastewater irrigation represent a de minimis risk to human health. Assuming additivity, the mixture of PPCPs could potentially present a hazard. Further work needs to be done to assess the risk of the mixture of PPCPs that may be present in edible tissue of plants grown under these three amendment practices. Copyright © 2014 Elsevier Ltd. All rights reserved.

Systems Biology of Microbial Exopolysaccharides Production.

Science.gov (United States)

Ates, Ozlem

2015-01-01

Exopolysaccharides (EPSs) produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture, and medicine. EPSs are mainly associated with high-value applications, and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However, only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover, a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore, a systems-based approach constitutes an important step toward understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism, and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan, and dextran.

Systems biology of microbial exopolysaccharides production

Directory of Open Access Journals (Sweden)

Ozlem eAtes

2015-12-01

Full Text Available Exopolysaccharides (EPS produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture and medicine. EPSs are mainly associated with high-value applications and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore a systems-based approach constitutes an important step towards understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan and dextran.

Smoking: An independent risk factor for lost productivity in chronic rhinosinusitis.

Science.gov (United States)

Campbell, Adam P; Hoehle, Lloyd P; Phillips, Katie M; Caradonna, David S; Gray, Stacey T; Sedaghat, Ahmad R

2017-08-01

Chronic rhinosinusitis (CRS) is associated with a significant loss of patient productivity that costs billions of dollars every year. Smoking is associated with worsening sinonasal symptoms, but its effect on lost productivity in CRS patients has yet to be described. Therefore, we sought to determine the association between smoking and productivity in patients with CRS. Prospective cross-sectional cohort study of 140 patients with CRS. Sinonasal symptom severity was measured using the 22-item Sino-Nasal Outcomes Test. Lost productivity was assessed by asking participants how many days of work and/or school they missed in the last 3 months due to CRS. Associations were sought between lost productivity and smoking. Participants missed a mean of 3.0 days (standard deviation = 12.8 days) of work or school due to CRS. Having any history of smoking was associated with 6 days of lost productivity due to CRS (adjusted β = 6.20, 95% confidence interval [CI]: 0.64 to 11.77, P = .031). Although the number of active smokers in our study cohort was very small (N = 6), we performed a univariate association between smoking status, considering former smokers and active smokers separately, and found that active smoking (β = 11.75, 95% CI: 2.11 to 21.40, P = .018) had a much larger impact on CRS-related productivity loss than that experienced by former smokers (β = 4.45, 95% CI: -0.32 to 9.23, P = .070). Smoking (likely driven by active smoking) is independently associated with missed days of work or school in patients with CRS. Further study is needed to determine whether interventions directed at smoking may impact CRS-related productivity loss. 2c Laryngoscope, 127:1742-1745, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

Microorganisms, Qualitative Indicators for Meat Products

Directory of Open Access Journals (Sweden)

Marioara Nicoleta Filimon

2010-10-01

Full Text Available Due to the fact that, for a few years now, our focus is more and more concentrated on safety and security of meat and vegetable products, this study’s aim is to evaluate the quality of certain well - known meat products (sausages, dry salami, and half-dried salami, purchased in a supermarket, from Timisoara. Microbiological tests were made especially on sanitary microbiological indicators (Escherichia, Enterobacter, Klebsiella. These tests emphasize hygiene in processing ang handling of products. In some cases, it higtlights how various heat treatments (pasteurization type apply to food products. It also establishes the microbial load on the microscopic field and the colony forming units, by a culture method in plates, at 37º C for 48 hours. Based on the obtained results, it has been established that, concerning the microbial load and the presence or absence of coliform bacteria, studied products fall into the quality permitted by applicable law.

Severe Cushing’s syndrome due to small cell prostate carcinoma: a case and review of literature

Directory of Open Access Journals (Sweden)

M S Elston

2017-07-01

Full Text Available Cushing’s syndrome (CS due to ectopic adrenocorticotrophic hormone (ACTH is associated with a variety of tumours most of which arise in the thorax or abdomen. Prostate carcinoma is a rare but important cause of rapidly progressive CS. To report a case of severe CS due to ACTH production from prostate neuroendocrine carcinoma and summarise previous published cases. A 71-year-old male presented with profound hypokalaemia, oedema and new onset hypertension. The patient reported two weeks of weight gain, muscle weakness, labile mood and insomnia. CS due to ectopic ACTH production was confirmed with failure to suppress cortisol levels following low- and high-dose dexamethasone suppression tests in the presence of a markedly elevated ACTH and a normal pituitary MRI. Computed tomography demonstrated an enlarged prostate with features of malignancy, confirmed by MRI. Subsequent prostatic biopsy confirmed neuroendocrine carcinoma of small cell type and conventional adenocarcinoma of the prostate. Adrenal steroidogenesis blockade was commenced using ketoconazole and metyrapone. Complete biochemical control of CS and evidence of disease regression on imaging occurred after four cycles of chemotherapy with carboplatin and etoposide. By the sixth cycle, the patient demonstrated radiological progression followed by recurrence of CS and died nine months after initial presentation. Prostate neuroendocrine carcinoma is a rare cause of CS that can be rapidly fatal, and early aggressive treatment of the CS is important. In CS where the cause of EAS is unable to be identified, a pelvic source should be considered and imaging of the pelvis carefully reviewed.

Projected impacts to the production of outdoor recreation opportunities across US state park systems due to the adoption of a domestic climate change mitigation policy

International Nuclear Information System (INIS)

Smith, Jordan W.; Leung, Yu-Fai; Seekamp, Erin; Walden-Schreiner, Chelsey; Miller, Anna B.

2015-01-01

Highlights: • A technical efficiency model identifies where state park systems can be improved. • The technical efficiency model is joined with output of CC policy simulations. • Shifts in operating expenditure under the CC mitigation policy are estimated. • Results reveal substantial variability across states. • Increasing technical efficiency is the best solution to adapt to CC policy impacts. - Abstract: Numerous empirical and simulation-based studies have documented or estimated variable impacts to the economic growth of nation states due to the adoption of domestic climate change mitigation policies. However, few studies have been able to empirically link projected changes in economic growth to the provision of public goods and services. In this research, we couple projected changes in economic growth to US states brought about by the adoption of a domestic climate change mitigation policy with a longitudinal panel dataset detailing the production of outdoor recreation opportunities on lands managed in the public interest. Joining empirical data and simulation-based estimates allow us to better understand how the adoption of a domestic climate change mitigation policy would affect the provision of public goods in the future. We first employ a technical efficiency model and metrics to provide decision makers with evidence of specific areas where operational efficiencies within the nation's state park systems can be improved. We then augment the empirical analysis with simulation-based changes in gross state product (GSP) to estimate changes to the states’ ability to provide outdoor recreation opportunities from 2014 to 2020; the results reveal substantial variability across states. Finally, we explore two potential solutions (increasing GSP or increasing technical efficiency) for addressing the negative impacts on the states’ park systems operating budgets brought about by the adoption of a domestic climate change mitigation policy; the

Pebble Bed Reactor Dust Production Model

Energy Technology Data Exchange (ETDEWEB)

Abderrafi M. Ougouag; Joshua J. Cogliati

2008-09-01

The operation of pebble bed reactors, including fuel circulation, can generate graphite dust, which in turn could be a concern for internal components; and to the near field in the remote event of a break in the coolant circuits. The design of the reactor system must, therefore, take the dust into account and the operation must include contingencies for dust removal and for mitigation of potential releases. Such planning requires a proper assessment of the dust inventory. This paper presents a predictive model of dust generation in an operating pebble bed with recirculating fuel. In this preliminary work the production model is based on the use of the assumption of proportionality between the dust production and the normal force and distance traveled. The model developed in this work uses the slip distances and the inter-pebble forces computed by the authors’ PEBBLES. The code, based on the discrete element method, simulates the relevant static and kinetic friction interactions between the pebbles as well as the recirculation of the pebbles through the reactor vessel. The interaction between pebbles and walls of the reactor vat is treated using the same approach. The amount of dust produced is proportional to the wear coefficient for adhesive wear (taken from literature) and to the slip volume, the product of the contact area and the slip distance. The paper will compare the predicted volume with the measured production rates. The simulation tallies the dust production based on the location of creation. Two peak production zones from intra pebble forces are predicted within the bed. The first zone is located near the pebble inlet chute due to the speed of the dropping pebbles. The second peak zone occurs lower in the reactor with increased pebble contact force due to the weight of supported pebbles. This paper presents the first use of a Discrete Element Method simulation of pebble bed dust production.

Pebble Bed Reactor Dust Production Model

International Nuclear Information System (INIS)

Abderrafi M. Ougouag; Joshua J. Cogliati

2008-01-01

The operation of pebble bed reactors, including fuel circulation, can generate graphite dust, which in turn could be a concern for internal components; and to the near field in the remote event of a break in the coolant circuits. The design of the reactor system must, therefore, take the dust into account and the operation must include contingencies for dust removal and for mitigation of potential releases. Such planning requires a proper assessment of the dust inventory. This paper presents a predictive model of dust generation in an operating pebble bed with recirculating fuel. In this preliminary work the production model is based on the use of the assumption of proportionality between the dust production and the normal force and distance traveled. The model developed in this work uses the slip distances and the inter-pebble forces computed by the authors PEBBLES. The code, based on the discrete element method, simulates the relevant static and kinetic friction interactions between the pebbles as well as the recirculation of the pebbles through the reactor vessel. The interaction between pebbles and walls of the reactor vat is treated using the same approach. The amount of dust produced is proportional to the wear coefficient for adhesive wear (taken from literature) and to the slip volume, the product of the contact area and the slip distance. The paper will compare the predicted volume with the measured production rates. The simulation tallies the dust production based on the location of creation. Two peak production zones from intra pebble forces are predicted within the bed. The first zone is located near the pebble inlet chute due to the speed of the dropping pebbles. The second peak zone occurs lower in the reactor with increased pebble contact force due to the weight of supported pebbles. This paper presents the first use of a Discrete Element Method simulation of pebble bed dust production

Bacillus sp. R2 α-amylase production optimization: Pasta cooking ...

African Journals Online (AJOL)

Aghomotsegin

α-Amylases (EC 3.2.1.1; 1,4-α-D-glucanglucanohydrolase) are enzymes that are widely studied and used in industries. ... may be a promising medium for industrial amylase production due to its availability. ... technique is of utmost importance due to its economic .... medium would further reduce the costs of enzyme.

Recalls of foods due to microbiological contamination classified by the U.S. Food and Drug Administration, fiscal years 2003 through 2011.

Science.gov (United States)

Dey, Manashi; Mayo, Jonathan A; Saville, Deborah; Wolyniak, Cecilia; Klontz, Karl C

2013-06-01

Recalls of foods contaminated with pathogens help reduce the transmission of infectious diseases. Here, we summarize the number and nature of foods recalled as a result of microbiological contamination, classified by the U.S. Food and Drug Administration for the period 1 October 2002 through 30 September 2011. Microbiological contamination accounted for 1,395 (42%) of 3,360 recalls of food during this period. Nuts and edible seeds, followed by fishery-seafood products and spices, were the types of products most commonly recalled for microbiological contamination. Salmonella contamination accounted for the greatest number of food products recalled due to microbiological contamination, and was the pathogen most often linked to reported outbreaks involving recalled food products.

The limit of irrigation adaption due to the inter-crop conflict of water use under changing climate and landuse

Science.gov (United States)

Okada, M.; Iizumi, T.; Sakamoto, T.; Kotoku, M.; Sakurai, G.; Nishimori, M.

2017-12-01

Replacing rainfed cropping system by irrigated one is assumed to be an effective measure for climate change adaptation in agriculture. However, in many agricultural impact assessments, future irrigation scenarios are externally given and do not consider variations in the availability of irrigation water under changing climate and land use. Therefore, we assess the potential effects of adaption measure expanding irrigated area under climate change by using a large-scale crop-river coupled model, CROVER [Okada et al. 2015, JAMES]. The CROVER model simulates the large-scale terrestrial hydrological cycle and crop growth depending on climate, soil properties, landuse, crop cultivation management, socio-economic water demand, and reservoir operation management. The bias-corrected GCMs outputs under the RCP 8.5 scenario were used. The future expansion of irrigation area was estimated by using the extrapolation method based on the historical change in irrigated and rainfed areas. As the results, the irrigation adaptation has only a limited effect on the rice production in East Asia due to the conflict of water use for irrigation with the other crops, whose farmlands require unsustainable water extraction with the excessively expanding irrigated area. In contrast, the irrigation adaptation benefits maize production in Europe due to the little conflict of water use for irrigation. Our findings suggest the importance of simulating the river water availability and crop production in a single model for the more realistic assessment in the irrigation adaptation potential effects of crop production under changing climate and land use.

Technological inputs and productivity growth in China's high-tech industries

NARCIS (Netherlands)

Wang, L.; Szirmai, A.

2003-01-01

The relationships between investment in R&D and productivity growth at sectoral level have been well documented in the literature. So far little research has been done on this topic for China, in part due to data limitations. This paper presents an empirical study of productivity growth and R&D at

Management of whitefly-transmitted viruses in open-field production systems

Science.gov (United States)

Whiteflies are a key pest of crops in open field production throughout the tropics and subtropics. This is due in large part to the long and diverse list of devastating plant viruses transmitted by these vectors. Open field production provides many challenges to manage these viruses and in many case...

Maximizing Light Utilization Efficiency and Hydrogen Production in Microalgal Cultures

Energy Technology Data Exchange (ETDEWEB)

Melis, Anastasios [Univ. of California, Berkeley, CA (United States)

2014-12-31

The project addressed the following technical barrier from the Biological Hydrogen Production section of the Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan: Low Sunlight Utilization Efficiency in Photobiological Hydrogen Production is due to a Large Photosystem Chlorophyll Antenna Size in Photosynthetic Microorganisms (Barrier AN: Light Utilization Efficiency).

Health-related effects of early part-time sick leave due to musculoskeletal disorders: a randomized controlled trial.

Science.gov (United States)

Shiri, Rahman; Kausto, Johanna; Martimo, Kari-Pekka; Kaila-Kangas, Leena; Takala, Esa-Pekka; Viikari-Juntura, Eira

2013-01-01

Previously we reported that early part-time sick leave enhances return to work (RTW) among employees with musculoskeletal disorders (MSD). This paper assesses the health-related effects of this intervention. Patients aged 18-60 years who were unable to perform their regular work due to MSD were randomized to part- or full-time sick leave groups. In the former, workload was reduced by halving working time. Using validated questionnaires, we assessed pain intensity and interference with work and sleep, region-specific disability due to MSD, self-rated general health, health-related quality of life (measured via EuroQol), productivity loss, depression, and sleep disturbance at baseline, 1, 3, 8, 12, and 52 weeks. We analyzed the repeated measures data (171-356 observations) with the generalized estimating equation approach. The intervention (part-time sick leave) and control (full-time sick leave) groups did not differ with regard to pain intensity, pain interference with work and sleep, region-specific disability, productivity loss, depression, or sleep disturbance. The intervention group reported better self-rated general health (adjusted P=0.07) and health-related quality of life (adjusted P=0.02) than the control group. In subgroup analyses, the intervention was more effective among the patients whose current problem began occurring part-time sick leave did not exacerbate pain-related symptoms and functional disability, but improved self-rated general health and health-related quality of life in the early stage of work disability due to MSD.

An economic production model for deteriorating items and time dependent demand with rework and multiple production setups

Science.gov (United States)

Uthayakumar, R.; Tharani, S.

2017-12-01

Recently, much emphasis has given to study the control and maintenance of production inventories of the deteriorating items. Rework is one of the main issues in reverse logistic and green supply chain, since it can reduce production cost and the environmental problem. Many researchers have focused on developing rework model, but few of them have developed model for deteriorating items. Due to this fact, we take up productivity and rework with deterioration as the major concern in this paper. In this paper, a production-inventory model with deteriorative items in which one cycle has n production setups and one rework setup (n, 1) policy is considered for deteriorating items with stock-dependent demand in case 1 and exponential demand in case 2. An effective iterative solution procedure is developed to achieve optimal time, so that the total cost of the system is minimized. Numerical and sensitivity analyses are discussed to examine the outcome of the proposed solution procedure presented in this research.

Remarks on diffractive production of the Higgs boson

Energy Technology Data Exchange (ETDEWEB)

Peschanski, R. [CEA Saclay, Service de Physique Theorique, URA 2306, Unite de Recherche Associee au CNRS, 91 - Gif-sur-Yvette (France)

2005-07-01

Central diffractive production of the Higgs boson has recently received much attention as a potentially interesting production mode at the LHC (large hadron collider). While the standard production of Higgs boson via gluon-gluon fusion can reach high cross-sections, the study of the Higgs boson will be uneasy due to accompanying particles and background. The original guiding line for central diffractive production is to compensate the weak cross-sections by a cleaner signal, and precise production kinematics thanks to the tagging of diffracted protons. We shall review some of the wishes and realities encountered in this field. Theoretical open problems of diffractive dynamics are involved in making accurate predictions for the LHC, among which the most crucial is understanding factorization breaking in hard diffraction.

Adaptive designs based on the truncated product method

Directory of Open Access Journals (Sweden)

Neuhäuser Markus

2005-09-01

Full Text Available Abstract Background Adaptive designs are becoming increasingly important in clinical research. One approach subdivides the study into several (two or more stages and combines the p-values of the different stages using Fisher's combination test. Methods Alternatively to Fisher's test, the recently proposed truncated product method (TPM can be applied to combine the p-values. The TPM uses the product of only those p-values that do not exceed some fixed cut-off value. Here, these two competing analyses are compared. Results When an early termination due to insufficient effects is not appropriate, such as in dose-response analyses, the probability to stop the trial early with the rejection of the null hypothesis is increased when the TPM is applied. Therefore, the expected total sample size is decreased. This decrease in the sample size is not connected with a loss in power. The TPM turns out to be less advantageous, when an early termination of the study due to insufficient effects is possible. This is due to a decrease of the probability to stop the trial early. Conclusion It is recommended to apply the TPM rather than Fisher's combination test whenever an early termination due to insufficient effects is not suitable within the adaptive design.

Plasma processing methods for hydrogen production

International Nuclear Information System (INIS)

Mizeraczyk, J.; Jasinski, M.

2016-01-01

In the future a transfer from the fossil fuel-based economy to hydrogen-based economy is expected. Therefore the development of systems for efficient H_2 production becomes important. The several conventional methods of mass-scale (or central) H_2 production (methane, natural gas and higher hydrocarbons reforming, coal gasification reforming) are well developed and their costs of H_2 production are acceptable. However, due to the H_2 transport and storage problems the small-scale (distributed) technologies for H_2 production are demanded. However, these new technologies have to meet the requirement of producing H_2 at a production cost of $(1-2)/kg(H_2) (or 60 g(H_2)/kWh) by 2020 (the U.S. Department of Energy's target). Recently several plasma methods have been proposed for the small-scale H_2 production. The most promising plasmas for this purpose seems to be those generated by gliding, plasmatron and nozzle arcs, and microwave discharges. In this paper plasma methods proposed for H_2 production are briefly described and critically evaluated from the view point of H_2 production efficiency. The paper is aiming at answering a question if any plasma method for the small-scale H_2 production approaches such challenges as the production energy yield of 60 g(H_2)/kWh, high production rate, high reliability and low investment cost. (authors)

NOy production, ozone loss and changes in net radiative heating due to energetic particle precipitation in 2002-2010

Science.gov (United States)

Sinnhuber, Miriam; Berger, Uwe; Funke, Bernd; Nieder, Holger; Reddmann, Thomas; Stiller, Gabriele; Versick, Stefan; von Clarmann, Thomas; Maik Wissing, Jan

2018-01-01

We analyze the impact of energetic particle precipitation on the stratospheric nitrogen budget, ozone abundances and net radiative heating using results from three global chemistry-climate models considering solar protons and geomagnetic forcing due to auroral or radiation belt electrons. Two of the models cover the atmosphere up to the lower thermosphere, the source region of auroral NO production. Geomagnetic forcing in these models is included by prescribed ionization rates. One model reaches up to about 80 km, and geomagnetic forcing is included by applying an upper boundary condition of auroral NO mixing ratios parameterized as a function of geomagnetic activity. Despite the differences in the implementation of the particle effect, the resulting modeled NOy in the upper mesosphere agrees well between all three models, demonstrating that geomagnetic forcing is represented in a consistent way either by prescribing ionization rates or by prescribing NOy at the model top.Compared with observations of stratospheric and mesospheric NOy from the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) instrument for the years 2002-2010, the model simulations reproduce the spatial pattern and temporal evolution well. However, after strong sudden stratospheric warmings, particle-induced NOy is underestimated by both high-top models, and after the solar proton event in October 2003, NOy is overestimated by all three models. Model results indicate that the large solar proton event in October 2003 contributed about 1-2 Gmol (109 mol) NOy per hemisphere to the stratospheric NOy budget, while downwelling of auroral NOx from the upper mesosphere and lower thermosphere contributes up to 4 Gmol NOy. Accumulation over time leads to a constant particle-induced background of about 0.5-1 Gmol per hemisphere during solar minimum, and up to 2 Gmol per hemisphere during solar maximum. Related negative anomalies of ozone are predicted by the models in nearly every polar

W, Z and top production measurements at LHCb

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00258880

2018-01-01

Due to its unique pseudorapidity coverage between 2 and 5 and excellent performance, the LHCb detector allows for complementary probe of electroweak and QCD processes to those at ATLAS and CMS experiments. Studies of electroweak boson and top production provide important probes of the Standard Model at LHC energies and constrain parton distribution functions. The recent results on theW, Z and top production are briefly summarized in the present proceedings.

Combined make-to-order and make-to-stock in a food production system

NARCIS (Netherlands)

Soman, Chetan Anil; Donk, Dirk Pieter van; Gaalman, Gerard

2002-01-01

The research into multi-product production/inventory control systems has mainly assumed one of the two strategies: Make-to-Order (MTO) or Make-to-Stock (MTS). In practice, however, many companies cater to an increasing variety of products with varying logistical demands (e.g. short due dates,

Combined make-to-order and make-to-stock in a food production system

NARCIS (Netherlands)

Soman, C.A.; van Donk, D.P.; Gaalman, G.J.C.

2004-01-01

The research into multi-product production/inventory control systems has mainly assumed one of the two strategies: make-to-order (MTO) or make-to-stock (MTS). In practice, however, many companies cater to an increasing variety of products with varying logistical demands (e.g. short due dates,

Whole wheat bread: Effect of bran fractions on dough and end-product quality

Science.gov (United States)

Consumption of whole-wheat based products is encouraged due to its important nutritional elements that beneficial to human health. However, processing of whole-wheat based products, such as whole-wheat bread, results in poor end-product quality. Bran was postulated as the major problem. In this stud...

Optimisation of a Swedish district heating system with reduced heat demand due to energy efficiency measures in residential buildings

International Nuclear Information System (INIS)

Åberg, M.; Henning, D.

2011-01-01

The development towards more energy efficient buildings, as well as the expansion of district heating (DH) networks, is generally considered to reduce environmental impact. But the combined effect of these two progressions is more controversial. A reduced heat demand (HD) due to higher energy efficiency in buildings might hamper co-production of electricity and DH. In Sweden, co-produced electricity is normally considered to displace electricity from less efficient European condensing power plants. In this study, a potential HD reduction due to energy efficiency measures in the existing building stock in the Swedish city Linköping is calculated. The impact of HD reduction on heat and electricity production in the Linköping DH system is investigated by using the energy system optimisation model MODEST. Energy efficiency measures in buildings reduce seasonal HD variations. Model results show that HD reductions primarily decrease heat-only production. The electricity-to-heat output ratio for the system is increased for HD reductions up to 30%. Local and global CO 2 emissions are reduced. If co-produced electricity replaces electricity from coal-fired condensing power plants, a 20% HD reduction is optimal for decreasing global CO 2 emissions in the analysed DH system. - Highlights: ► A MODEST optimisation model of the Linköping district heating system is used. ► The impact of heat demand reduction on heat and electricity production is examined. ► Model results show that heat demand reductions decrease heat-only production. ► Local and global CO 2 emissions are reduced. ► The system electricity-to-heat output increases for reduced heat demand up to 30%.

Minimizing inner product data dependencies in conjugate gradient iteration

Science.gov (United States)

Vanrosendale, J.

1983-01-01

The amount of concurrency available in conjugate gradient iteration is limited by the summations required in the inner product computations. The inner product of two vectors of length N requires time c log(N), if N or more processors are available. This paper describes an algebraic restructuring of the conjugate gradient algorithm which minimizes data dependencies due to inner product calculations. After an initial start up, the new algorithm can perform a conjugate gradient iteration in time c*log(log(N)).

Biglycan deficiency increases osteoclast differentiation and activity due to defective osteoblasts

DEFF Research Database (Denmark)

Bi, Yanming; Nielsen, Karina L; Kilts, Tina M

2006-01-01

to be independent of the differential production of soluble RANKL and OPG and, instead, due to a decrease in osteoblast maturation accompanied by increase in osteoblastic proliferation. In addition to the imbalance between differentiation and proliferation, there was a differential decrease in secretory leukocyte......Bone mass is maintained by a fine balance between bone formation by osteoblasts and bone resorption by osteoclasts. Although osteoblasts and osteoclasts have different developmental origins, it is generally believed that the differentiation, function, and survival of osteoclasts are regulated...... by osteogenic cells. We have previously shown that the extracellular matrix protein, biglycan (Bgn), plays an important role in the differentiation of osteoblast precursors. In this paper, we showed that Bgn is involved in regulating osteoclast differentiation through its effect on osteoblasts...

Biomass pyrolysis/gasification for product gas production: the overall investigation of parametric effects

International Nuclear Information System (INIS)

Chen, G.; Andries, J.; Luo, Z.; Spliethoff, H.

2003-01-01

The conventional biomass pyrolysis/gasification process for production of medium heating value gas for industrial or civil applications faces two disadvantages, i.e. low gas productivity and the accompanying corrosion of downstream equipment caused by the high content of tar vapour contained in the gas phase. The objective of this paper is to overcome these disadvantages, and therefore, the effects of the operating parameters on biomass pyrolysis are investigated in a laboratory setup based on the principle of keeping the heating value of the gas almost unchanged. The studied parameters include reaction temperature, residence time of volatile phase in the reactor, physico-chemical pretreatment of biomass particles, heating rate of the external heating furnace and improvement of the heat and mass transfer ability of the pyrolysis reactor. The running temperature of a separate cracking reactor and the geometrical configuration of the pyrolysis reactor are also studied. However, due to time limits, different types of catalysts are not used in this work to determine their positive influences on biomass pyrolysis behaviour. The results indicate that product gas production from biomass pyrolysis is sensitive to the operating parameters mentioned above, and the product gas heating value is high, up to 13-15 MJ/N m 3

Development of healthy marine ingredients from waste products from smoked rainbow trout

DEFF Research Database (Denmark)

Jacobsen, Charlotte; Honold, Philipp; Nouard, Marie-Louise

2014-01-01

There is an increasing demand for healthy marine omega-3 oils as well as new functional proteins for human consumption. At the same time there is an increasing demand for fish oil as an ingredient in fish feed due to the growth in production of farmed fish. The aquaculture industry currently uses...... approx. 850.000 tons of fish oil per year, which is expected to increase significantly in the coming years. The demand for fish oil for human consumption has been estimated to 425.000 tons by 2017. The present production of fish oil from wild fish is 1 mio. tons/year. Due to sustainability issues...... it is not possible to increase the production of fish oil from wild fish further. A possible source of omega-3 oils for human consumption is waste products from the fish industry. At present only approximately 40 % of the fish is used for human consumption and the rest is turned into waste products. Rainbow trout...

Impact of Rhinitis on Work Productivity: A Systematic Review.

Science.gov (United States)

Vandenplas, Olivier; Vinnikov, Denis; Blanc, Paul D; Agache, Ioana; Bachert, Claus; Bewick, Michael; Cardell, Lars-Olaf; Cullinan, Paul; Demoly, Pascal; Descatha, Alexis; Fonseca, Joao; Haahtela, Tari; Hellings, Peter W; Jamart, Jacques; Jantunen, Juha; Kalayci, Ömer; Price, David; Samolinski, Boleslaw; Sastre, Joaquin; Tian, Longxiu; Valero, Antonio L; Zhang, Xinyi; Bousquet, Jean

2017-10-07

Allergic rhinitis (AR) is increasingly acknowledged as having a substantial socioeconomic impact associated with impaired work productivity, although available information remains fragmented. This systematic review summarizes recently available information to provide a quantitative estimate of the burden of AR on work productivity including lost work time (ie, absenteeism) and reduced performance while working (ie, presenteeism). A Medline search retrieved original studies from 2005 to 2015 pertaining to the impact of AR on work productivity. A pooled analysis of results was carried out with studies reporting data collected through the validated Work Productivity and Activity Impairment (WPAI) questionnaire. The search identified 19 observational surveys and 9 interventional studies. Six studies reported economic evaluations. Pooled analysis of WPAI-based studies found an estimated 3.6% (95% confidence interval [CI], 2.4; 4.8%) missed work time and 35.9% (95% CI, 29.7; 42.1%) had impairment in at-work performance due to AR. Economic evaluations indicated that indirect costs associated with lost work productivity are the principal contributor to the total AR costs and result mainly from impaired presenteeism. The severity of AR symptoms was the most consistent disease-related factor associated with a greater impact of AR on work productivity, although ocular symptoms and sleep disturbances may independently affect work productivity. Overall, the pharmacologic treatment of AR showed a beneficial effect on work productivity. This systematic review provides summary estimates of the magnitude of work productivity impairment due to AR and identifies its main determinant factors. This information may help guide both clinicians and health policy makers. Copyright © 2017 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Design and analysis of fuel ethanol production from raw glycerol

International Nuclear Information System (INIS)

Posada, J.A.; Cardona, C.A.

2010-01-01

Three configurations for fuel ethanol production from raw glycerol using Escherichia coli were simulated and economically assessed using Aspen Plus and Aspen Icarus, respectively. These assessments considered raw glycerol (60 wt%) purification to both crude glycerol (88 wt%) and pure glycerol (98 wt%). The highest purification cost (PC) was obtained using pure glycerol due to its higher energy consumption in the distillation stage. In addition, the remaining methanol in the raw glycerol stream was recovered and recycled, decreasing the purification costs. The E. coli strain is able to convert crude glycerol (at 10 g/L or 20 g/L), or pure glycerol (at 10 g/L) to ethanol. Among these three glycerol concentrations, the lowest bioconversion cost was obtained when crude glycerol was diluted at 20 g/L. Purification and global production costs were compared with the commercial prices of glycerol and fuel ethanol from corn and sugarcane. Purification costs of raw glycerol were lower than previously reported values due to the methanol recovery. Global production costs for fuel ethanol from glycerol were lower than the reported values for corn-based production and higher than those for cane-based production. (author)

PHA Production in Aerobic Mixed Microbial Cultures

NARCIS (Netherlands)

Johnson, K.

2010-01-01

Polyhydroxyalkanoate (PHA) is a common intracellular energy and carbon storage material in bacteria, which is considered as a bioplastic due to its plastic like properties. PHAs are versatile materials which are biodegradable and made from renewable resources. Commercial production of PHAs is

Calorimetric study on human erythrocyte glycolysis. Heat production in various metabolic conditions.

Science.gov (United States)

Minakami, S; de Verdier, C H

1976-06-01

The heat production of human erythrocytes was measured on a flow microcalorimeter with simultaneous analyses of lactate and other metabolites. The heat production connected with the lactate formation was about 17 kcal (71 kJ) per mol lactate formed which corresponded to the sum of heat production due to the formation of lactate from glucose and the heat production due to neutralization. The heat production rate increased as the pH of the suspension increased, corresponding to the increase in lactate formation. Glycolytic inhibitors such as fluoride and monoiodoacetate caused a decrease in the rate of heat production, whereas arsenate induced a large transient increase in heat production associated with a transient increase in lactate formation. Decrease in pyruvate concentration was usually associated with increase in heat production, although the decreased pyruvate concentration was coupled with formation of 2,3-bisphosphoglycerate. When inosine, dihydroxyacetone or D-glyceraldehyde was used as a substrate, an increase in the heat production rate was observed. Addition of methylene blue caused an oxygen uptake which was accompanied by a remarkable increase in heat production rate corresponding to about 160 kcal (670 kJ) per mol oxygen consumed. The value for heat production in red cells in the above-mentioned metabolic conditions was considered in relation to earlier known data on free energy and enthalpy changes of the different metabolic steps in the glycolytic pathway.

Microbial production of poly(hydroxybutyrate) from C₁ carbon sources.

Science.gov (United States)

Khosravi-Darani, Kianoush; Mokhtari, Zahra-Beigom; Amai, Tomohito; Tanaka, Kenji

2013-02-01

Polyhydroxybutyrate (PHB) is an attractive substitute for petrochemical plastic due to its similar properties, biocompatibility, and biodegradability. The cost of scaled-up PHB production inhibits its widespread usage. Intensive researches are growing to reduce costs and improve thermomechanical, physical, and processing properties of this green biopolymer. Among cheap substrates which are used for reducing total cost of PHB production, some C₁ carbon sources, e.g., methane, methanol, and CO₂ have received a great deal of attention due to their serious role in greenhouse problem. This article reviews the fundamentals of strategies for reducing PHA production and moves on to the applications of several cheap substrates with a special emphasis on methane, methanol, and CO₂. Also, some explanation for involved microorganisms including the hydrogen-oxidizing bacteria and methanotrophs, their history, culture condition, and nutritional requirements are given. After description of some important strains among the hydrogen-oxidizing and methanotrophic producers of PHB, the article is focused on limitations, threats, and opportunities for application and their future trends.

Performance of casings in Cerro Prieto production wells

Energy Technology Data Exchange (ETDEWEB)

Dominguez A, B.; Vital B, F.; Bermejo M, F.; Sanchez G, G.

1981-01-01

A careful evaluation of different production casings used at Cerro Prieto from 1964 to date has shown that the following casings have yielded particularly impressive results: 7 5/8-in. diameter, J-55, 26 lb/ft; 7 5/8-in. diameter, K-55, 45.3 lb/ft; and 5-in. diameter, K-55, 23.2 lb/ft. These casings differ from others of the same diameter but lighter weight which were also used at the field. The results are favorable in spite of severe construction problems, especially the loss of circulation during cementing operations, which we encountered in some of the wells where these casings were used. The use of gravity-fed fine sand as packing material and the arrangement of the production and intermediate casings were important in avoiding damage due to tension-compression stresses and, above all, damage due to internal or external corrosion over time. This situation is clearly evidenced if we compare the damage to the above casings with that experienced by grade N-80 production casings, especially in a corrosive environment.

Panhypopituitarism Due to Hemochromatosis

OpenAIRE

Mesut Özkaya; Kadir Gis; Ali Çetinkaya

2013-01-01

Hemochromatosis is an iron storage disease. Panhypopituitarism is a clinical condition in which the anterior pituitary hormones are deficient. Herein, we report a rare case of panhypopituitarism due to hemochromatosis. Turk Jem 2013; 17: 125-6

Dynamics of Major Cereals Productivity in Nepal

Directory of Open Access Journals (Sweden)

Samaya Gairhe

2018-05-01

Full Text Available Cereal crops have played major roles in addressing food security issues in Nepal. In recent years there have been fluctuations in crop production and demands situations due to various reasons. Thus, the present study aims to analyze the dynamics of major cereals productivity in Nepal from 1995 to 2014. Focus group discussions were done in mid-hills and tarai of Nepal in 2015. Percentage change, compound growth rate, annual rate of change, coefficient of variation, instability index were calculated to analyze results. The result shows that the area, production and productivity of major cereals had an increasing trend over the study period. The major factors contributing on productivity increase in cereal crops were irrigation facilities, use of improved and hybrid seeds, chemical fertilizer and better technical knowhow among the farmers. For effective adoption of research outputs to improve the productivity emphasis should also be given on promotion of public private partnership (PPP in research and development.

Constitutional Due Process and Educational Administration.

Science.gov (United States)

Uerling, Donald F.

1985-01-01

Discusses substantive and procedural due process as required by the United States Constitution and interpreted by the Supreme Court, with particular reference to situations arising in educational environments. Covers interests protected by due process requirements, the procedures required, and some special considerations that may apply. (PGD)

Noncommutative Yang-Mills from equivalence of star products

International Nuclear Information System (INIS)

Jurco, B.; Schupp, P.

2000-01-01

It is shown that the transformation between ordinary and noncommutative Yang-Mills theory as formulated by Seiberg and Witten is due to the equivalence of certain star products on the D-brane world-volume. (orig.)

Noncommutative Yang-Mills from equivalence of star products

Energy Technology Data Exchange (ETDEWEB)

Jurco, B. [Max-Planck-Institut fuer Mathematik, Bonn (Germany); Schupp, P. [Sektion Physik, Universitaet Muenchen, Theresienstrasse 37, 80333 Muenchen (Germany)

2000-05-01

It is shown that the transformation between ordinary and noncommutative Yang-Mills theory as formulated by Seiberg and Witten is due to the equivalence of certain star products on the D-brane world-volume. (orig.)

Forecasting seasonal demand : a serious limitation of Winters' forecasting procedure and the added value of product-aggregation

NARCIS (Netherlands)

Donselaar, van K.H.

2003-01-01

The well-known method for forecasting seasonal demand, Winters’ procedure, has a serious drawback: if the relative demand uncertainty increases (e.g. due to larger product assortments) or if the amount of historical demand data decreases (e.g. due to smaller product life cycles), the quality of the

Frequency of Cushing's syndrome due to ACTH-secreting adrenal medullary lesions: a retrospective study over 10 years from a single center.

Science.gov (United States)

Falhammar, Henrik; Calissendorff, Jan; Höybye, Charlotte

2017-01-01

Cushing's syndrome due to ectopic adrenocorticotropic hormone production from adrenal medullary lesions has occasionally been described. We retrospectively reviewed all 164 cases of Cushing's syndrome and 77 cases of pheochromocytomas during 10 years. Of all cases with Cushing's syndrome, only two cases (1.2 %) were due to ectopic adrenocorticotropic hormone production from adrenal medullary lesions (one case of pheochromocytoma and one case of adrenal medullary hyperplasia). Of all pheochromocytomas only the above-mentioned case (1.3 %) also gave rise to an ectopic adrenocorticotropic hormone syndrome. The clinical presentation of adrenocorticotropic hormone-secreting pheochromocytoma and adrenal medullary hyperplasia can be anything from mild to dramatic. These are rare conditions important to bear in mind in the workup of a patient with Cushing's syndrome or with pheochromocytoma. The identification of ectopic adrenocorticotropic hormone secretion from adrenal medullary lesions can be life-saving.

Petroleum product scarcity: a review of the supply and distribution of petroleum products in Nigeria

International Nuclear Information System (INIS)

Akpoghomeh, Osi S.; Badejo, Dele

2006-01-01

Nigeria ranks high among the comity of oil producers both at the world level and among the OPEC eleven. It is, therefore, paradoxical that the supply of all petroleum products is erratic and has declined sharply in the recent past. This paper thus reviews the petroleum product supply and distribution systems in the country to ascertain the extent to which the system may have contributed to the present product scarcity in Nigeria and, by extension, identify the causes of the present regime of petroleum product scarcity. The paper observes that the network density and connectivity of petroleum product distribution pipelines are low and both indicators consequently show the inadequacy/deficiency of the network in ensuring an efficient distribution system. The supply mode, on the other hand, has, over the years, demonstrated its inability to guarantee adequate supply due to factors including sabotage, vandalism, banditry and poorly maintained infrastructure. Further, the federal government and the major and independent marketers could not sustain the importation of petroleum products because of the shortfall between the landed cost of imported products and their selling prices in Nigeria, which made the business unprofitable. Finally, the paper examines the withdrawal by the federal government of subsidies on the price of petroleum products consumed locally. All the above factors together occasioned increases in the cost of products. In conclusion, this paper supports the call for the privatization of refineries and the depot/pipeline system as a viable option to end the supply problems. (Author)

Mineral Resources: Reserves, Peak Production and the Future

Directory of Open Access Journals (Sweden)

Lawrence D. Meinert

2016-02-01

Full Text Available The adequacy of mineral resources in light of population growth and rising standards of living has been a concern since the time of Malthus (1798, but many studies erroneously forecast impending peak production or exhaustion because they confuse reserves with “all there is”. Reserves are formally defined as a subset of resources, and even current and potential resources are only a small subset of “all there is”. Peak production or exhaustion cannot be modeled accurately from reserves. Using copper as an example, identified resources are twice as large as the amount projected to be needed through 2050. Estimates of yet-to-be discovered copper resources are up to 40-times more than currently-identified resources, amounts that could last for many centuries. Thus, forecasts of imminent peak production due to resource exhaustion in the next 20–30 years are not valid. Short-term supply problems may arise, however, and supply-chain disruptions are possible at any time due to natural disasters (earthquakes, tsunamis, hurricanes or political complications. Needed to resolve these problems are education and exploration technology development, access to prospective terrain, better recycling and better accounting of externalities associated with production (pollution, loss of ecosystem services and water and energy use.

Production regimes in four eastern boundary current systems

Science.gov (United States)

Carr, M. E.; Kearns, E. J.

2003-01-01

High productivity (maxima 3 g C m(sup -2)day(sup -1)) of the Eastern Boundary Currents (EBCs), i.e. the California, Peru-Humboldt, Canary and Benguela Currents, is driven by a combination of local forcing and large-scale circulation. The characteristics of the deep water brought to the surface by upwelling favorable winds depend on the large-scale circulation patterns. Here we use a new hydrographic and nutrient climatology together with satellite measurements ofthe wind vector, sea-surface temperature (SST), chlorophyll concentration, and primary production modeled from ocean color to quantify the meridional and seasonal patterns of upwelling dynamics and biological response. The unprecedented combination of data sets allows us to describe objectively the variability for small regions within each current and to characterize the governing factors for biological production. The temporal and spatial environmental variability was due in most regions to large-scale circulation, alone or in combination with offshore transport (local forcing). The observed meridional and seasonal patterns of biomass and primary production were most highlycorrelated to components representing large-scale circulation. The biomass sustained by a given nutrient concentration in the Atlantic EBCs was twice as large as that of the Pacific EBCs. This apparent greater efficiency may be due toavailability of iron, physical retention, or differences in planktonic community structure.

Stream Health Sensitivity to Landscape Changes due to Bioenergy Crops Expansion

Science.gov (United States)

Nejadhashemi, A.; Einheuser, M. D.; Woznicki, S. A.

2012-12-01

Global demand for bioenergy has increased due to uncertainty in oil markets, environmental concerns, and expected increases in energy consumption worldwide. To develop a sustainable biofuel production strategy, the adverse environmental impacts of bioenergy crops expansion should be understood. To study the impact of bioenergy crops expansion on stream health, the adaptive neural-fuzzy inference system (ANFIS) was used to predict macroinvertebrate and fish stream health measures. The Hilsenhoff Biotic Index (HBI), Family Index of Biological Integrity (Family IBI), and Number of Ephemeroptera, Plecoptera, and Trichoptera taxa (EPT taxa) were used as macroinvertebrate measures, while the Index of Biological Integrity (IBI) was used for fish. A high-resolution biophysical model built using the Soil and Water Assessment Tool was used to obtain water quantity and quality variables for input into the ANFIS stream health predictive models. Twenty unique crop rotations were developed to examine impacts of bioenergy crops expansion on stream health in the Saginaw Bay basin. Traditional intensive row crops generated more pollution than current landuse conditions, while second-generation biofuel crops associated with less intensive agricultural activities resulted in water quality improvement. All three macroinvertebrate measures were negatively impacted during intensive row crop productions but improvement was predicted when producing perennial crops. However, the expansion of native grass, switchgrass, and miscanthus production resulted in reduced IBI relative to first generation row crops. This study demonstrates that ecosystem complexity requires examination of multiple stream health measures to avoid potential adverse impacts of landuse change on stream health.

Modeling of thermal mode of drying special purposes ceramic products in batch action chamber dryers

Science.gov (United States)

Lukianov, E. S.; Lozovaya, S. Yu; Lozovoy, N. M.

2018-03-01

The article is devoted to the modeling of batch action chamber dryers in the processing line for producing shaped ceramic products. At the drying stage, for various reasons, most of these products are warped and cracked due to the occurrence of irregular shrinkage deformations due to the action of capillary forces. The primary cause is an untruly organized drying mode due to imperfection of chamber dryers design specifically because of the heat-transfer agent supply method and the possibility of creating a uniform temperature field in the whole volume of the chamber.

Automated Production of High Rep Rate Foam Targets

Science.gov (United States)

Hall, F.; Spindloe, C.; Haddock, D.; Tolley, M.; Nazarov, W.

2016-04-01

Manufacturing low density targets in the numbers needed for high rep rate experiments is highly challenging. This report summarises advances from manual production to semiautomated and the improvements that follow both in terms of production time and target uniformity. The production process is described and shown to be improved by the integration of an xyz robot with dispensing capabilities. Results are obtained from manual and semiautomated production runs and compared. The variance in the foam thickness is reduced significantly which should decrease experimental variation due to target parameters and could allow for whole batches to be characterised by the measurement of a few samples. The work applies to both foil backed and free standing foam targets.

Impact of Machine Breakdowns on Productivity

Directory of Open Access Journals (Sweden)

Anwaruddin Tanwari

2011-10-01

Full Text Available This paper reports the machine breakdowns and their impact on the total productivity for the FMCGs (Fast Moving Consumer Goods industry because higher productivity rate is important factor on which the customer services largely depend in this competitive business world. This paper also suggests that the machine breakdowns and other related problems within the plant are due to improper care, keeping the plant operative for twenty four hours a day, seven days a week without any break and lack of management\\'s concentration towards these issues. These break-downs results in un-timely closure of the plant and very poor production performance is achieved in the plant that affects the service level at great level. Realising the importance of maintenance in improving productivity and service, an attempt has been made in this paper to study the scope of maintenance with the help of a case study.

34 CFR 674.41 - Due diligence-general requirements.

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Due diligence-general requirements. 674.41 Section 674... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM Due Diligence § 674.41 Due diligence—general requirements. (a) General. Each institution shall exercise due diligence in collecting...

Proton production, neutralisation and reduction in a floating water bridge

International Nuclear Information System (INIS)

Sammer, Martina; Wexler, Adam D; Kuntke, Philipp; Stanulewicz, Natalia; Lankmayr, Ernst; Woisetschläger, Jakob; Fuchs, Elmar C; Wiltsche, Helmar

2015-01-01

This work reports on proton production, transport, reduction and neutralization in floating aqueous bridges under the application of a high dc voltage (‘floating water bridge’). Recently possible mechanisms for proton transfer through the bridge were suggested. In this work we visualize and describe the production of protons in the anolyte and their neutralization in the catholyte. Apart from that, protons are reduced to hydrogen due to electrolysis. Microbubbles are detached instantly, due to the electrohydrodynamic flow at the electrode surface. No larger, visible bubbles are formed and the system degasses through the bridge due to its higher local temperature. A detailed analysis of trace elements originating from beaker material, anode or the atmosphere is presented, showing that their influence on the overall conduction compared to the contribution of protons is negligible. Finally, an electrochemical rationale of high voltage electrolysis of low ionic strength solutions is presented. (paper)

Proton production, neutralisation and reduction in a floating water bridge

Science.gov (United States)

Sammer, Martina; Wexler, Adam D.; Kuntke, Philipp; Wiltsche, Helmar; Stanulewicz, Natalia; Lankmayr, Ernst; Woisetschläger, Jakob; Fuchs, Elmar C.

2015-10-01

This work reports on proton production, transport, reduction and neutralization in floating aqueous bridges under the application of a high dc voltage (‘floating water bridge’). Recently possible mechanisms for proton transfer through the bridge were suggested. In this work we visualize and describe the production of protons in the anolyte and their neutralization in the catholyte. Apart from that, protons are reduced to hydrogen due to electrolysis. Microbubbles are detached instantly, due to the electrohydrodynamic flow at the electrode surface. No larger, visible bubbles are formed and the system degasses through the bridge due to its higher local temperature. A detailed analysis of trace elements originating from beaker material, anode or the atmosphere is presented, showing that their influence on the overall conduction compared to the contribution of protons is negligible. Finally, an electrochemical rationale of high voltage electrolysis of low ionic strength solutions is presented.

Innovation in product design as a factor for reducing logistic and production costs

Directory of Open Access Journals (Sweden)

Luciana Fighera Marzall

2016-03-01

Full Text Available Innovation has been considered of fundamental importance for organizations competing in dynamic environments, which along with cost management has been shown as an organizational strategy that allows the company to measure its results and implement measures that impact on the organization's performance as a whole. This paper, carried out in a metal mechanical industry of a telecommunications engineering branch, aims to analyse cost reduction in logistics raw materials areas through innovation in the product design, which are antennas and towers for telephone networks. In terms of methodology, this study presents itself as a qualitative and quantitative research-action, which from the link between theory and practice allows for intervention in the middle of the researchers studied. As a result, an innovative project was developed, which allowed for the reduction costs of production by 68% and logistics by 32%. Despite the significant decrease in costs, the quality of manufactured products not declined and customer needs were met, thus making the company more competitive against competitors. Not widespread in the literature, this analysis of the impact on logistics and production costs due to improvements in the project is the main contribution theoretical of this paper.

Dependence and conflict between production and sales

NARCIS (Netherlands)

Konijnendijk, P.A.

1993-01-01

Functional interdependence between production and sales leads to the need for coordination and existence of conflict. Their plans and activities have to be coordinated. It is commonly recognized, however, that many conflicts may exist between these two functions due to, for example, difference in

The history and global market of oral home-care products

Directory of Open Access Journals (Sweden)

Juliana Jobim Jardim

2009-06-01

Full Text Available This literature review reports the history and the current market of oral home-care products. It provides information extending from the products used by our ancestors to those currently available, as well as on the changes in the supply and consumption of these products. Although the scientific knowledge about oral diseases has improved greatly in recent years, our ancestors had already been concerned with cleaning their teeth. A variety of rudimentary products and devices were used since before recorded history, like chewing sticks, tree twigs, bird feathers, animal bones, tooth powder and home-made mouth rinses. Today, due to technological improvements of the cosmetic industry and market competition, home-use oral care products available in the marketplace offer a great variety of options. An increase in the consumption of oral care products has been observed in the last decades. Estimates show that Latin America observed a 12% increase in hygiene and beauty products sales between 2002 and 2003, whereas the observed global rate was approximately 2%. A significant increase in the per capita consumption of toothpaste, toothbrush, mouthrinse and dental floss has been estimated from 1992 to 2002, respectively at rates of 38.3%, 138.3%, 618.8% and 177.2%. Pertaining to this increased supply and consumption of oral care products, some related questions remain unanswered, like the occurrence of changes in disease behavior due to the use of new compounds, their actual efficacy and correct indications, and the extent of the benefits to oral health derived from consuming more products.

A Conceptual Female Hygiene Product : Developed from Needs and Prerequisites in an Agricultural East African Context

OpenAIRE

Olsson, Maria; Larsson, Lina

2014-01-01

Menstruation is a large problem for females in development countries today. Studies have shown that around 40 percent of menstruating girls have been absent from school due to their menstruation. One of the challenges that need to be solved is the absence of female hygiene products amongst women, especially in low income and developing countries due to the cost of commercial products. In countries where the national economy is unstable or poorly comes a problem with importing products, it wou...

The Study of Effect Factors on Organic Products Productivity on Farmer Income in Golestan Province

Directory of Open Access Journals (Sweden)

shahram nessabian

2015-01-01

Full Text Available In order to study the efficiency resulting from optimization of energy consumptionin organic farming, the amount of consumption and production inputs and their costs, obtained profit, cultivated area and … was estimated in conjuction with the three crop of wheat, canola and tomato in Iran over a five year period 2006-2011. Using the objective function and constraints, the DEA method was used to analyze the data. All the processes of models estimation was performed using DEAP software. To calculate the energy amount in external inputs consumption in conventional and organic farming were used coefficients to convert the amount of energy input consumption, too. Finally, the energy consumptions were compared in the two cultures. According to these results, the use of organic fertilizers and biological inputs (in consequence of more energy consumption in organic specific inputs leads to lower productivity growth in organic products. These results were significant in the 5 and 1 percent levels, respectively. Due to the type of used inputs in the inorganic products, in fuel inputs, nitrogen fertilizer, phosphate fertilizer, insecticide and fungicide, inorganic products had more consumption and hence the amount of energy inputs for organic products was higher. In the case of biofertilizer and biocontrol were also used in organic production, input energy in this part was more than input energy of inorganic products. Organic farms with lower energy consumption of imports and inputs, led to production of more energy in output. Thus the efficiency besides saving of energy consumption occurred in organic products.