Sample records for nanoarchaeum equitans creates

  1. Proteomic characterization of cellular and molecular processes that enable the Nanoarchaeum equitans--Ignicoccus hospitalis relationship.

    Directory of Open Access Journals (Sweden)

    Richard J Giannone

    Full Text Available Nanoarchaeum equitans, the only cultured representative of the Nanoarchaeota, is dependent on direct physical contact with its host, the hyperthermophile Ignicoccus hospitalis. The molecular mechanisms that enable this relationship are unknown. Using whole-cell proteomics, differences in the relative abundance of >75% of predicted protein-coding genes from both Archaea were measured to identify the specific response of I. hospitalis to the presence of N. equitans on its surface. A purified N. equitans sample was also analyzed for evidence of interspecies protein transfer. The depth of cellular proteome coverage achieved here is amongst the highest reported for any organism. Based on changes in the proteome under the specific conditions of this study, I. hospitalis reacts to N. equitans by curtailing genetic information processing (replication, transcription in lieu of intensifying its energetic, protein processing and cellular membrane functions. We found no evidence of significant Ignicoccus biosynthetic enzymes being transported to N. equitans. These results suggest that, under laboratory conditions, N. equitans diverts some of its host's metabolism and cell cycle control to compensate for its own metabolic shortcomings, thus appearing to be entirely dependent on small, transferable metabolites and energetic precursors from I. hospitalis.

  2. Multi-omics analysis provides insight to the Ignicoccus hospitalis-Nanoarchaeum equitans association. (United States)

    Rawle, Rachel A; Hamerly, Timothy; Tripet, Brian P; Giannone, Richard J; Wurch, Louie; Hettich, Robert L; Podar, Mircea; Copié, Valerie; Bothner, Brian


    Studies of interspecies interactions are inherently difficult due to the complex mechanisms which enable these relationships. A model system for studying interspecies interactions is the marine hyperthermophiles Ignicoccus hospitalis and Nanoarchaeum equitans. Recent independently-conducted 'omics' analyses have generated insights into the molecular factors modulating this association. However, significant questions remain about the nature of the interactions between these archaea. We jointly analyzed multiple levels of omics datasets obtained from published, independent transcriptomics, proteomics, and metabolomics analyses. DAVID identified functionally-related groups enriched when I. hospitalis is grown alone or in co-culture with N. equitans. Enriched molecular pathways were subsequently visualized using interaction maps generated using STRING. Key findings of our multi-level omics analysis indicated that I. hospitalis provides precursors to N. equitans for energy metabolism. Analysis indicated an overall reduction in diversity of metabolic precursors in the I. hospitalis-N. equitans co-culture, which has been connected to the differential use of ribosomal subunits and was previously unnoticed. We also identified differences in precursors linked to amino acid metabolism, NADH metabolism, and carbon fixation, providing new insights into the metabolic adaptions of I. hospitalis enabling the growth of N. equitans. This multi-omics analysis builds upon previously identified cellular patterns while offering new insights into mechanisms that enable the I. hospitalis-N. equitans association. Our study applies statistical and visualization techniques to a mixed-source omics dataset to yield a more global insight into a complex system, that was not readily discernable from separate omics studies. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. A genomic analysis of the archael system Ignicoccus hospitalis-Nanoarchaeum equitans

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Hui; Anderson, Iain; Makarova, Kira S.; Elkins, James G.; Ivanova, Natalia; Wall, Mark A.; Lykidis, Athanasios; Mavromatis, Konstantinos; Podar, Mircea; Hudson, Matthew E.; Chen, Wenqiong; Deciu, Cosmin; Hutchinson, Don; Eads, Jonathan R.; Anderson, Abraham; Fernandes, Fillipe; Szeto, Ernest; Lapidus, Alla; Kyrpides, NikosC.; Saier Jr., Milton G.; Richardson, Paul M.; Rachel, Reinhard; Huber, Harald; Eisen, Jonathan A.; Koonin, Eugene V.; Keller, Martin; Stetter, Karl O.


    BACKGROUND: The relationship between the hyperthermophiles Ignicoccus hospitalis and Nanoarchaeum equitans is the only known example of a specific association between two species of Archaea. Little is known about the mechanisms that enable this relationship. RESULTS: We sequenced the complete genome of I. hospitalis and found it to be the smallest among independent, free-living organisms. A comparative genomic reconstruction suggests that the I. hospitalis lineage has lost most of the genes associated with a heterotrophic metabolism that is characteristic of most of the Crenarchaeota. A streamlined genome is also suggested by a low frequency of paralogs and fragmentation of many operons. However, this process appears to be partially balanced by lateral gene transfer from archaeal and bacterial sources. CONCLUSIONS: A combination of genomic and cellular features suggests highly efficient adaptation to the low energy yield of sulfur-hydrogen respiration and efficient inorganic carbon and nitrogen assimilation. Evidence of lateral gene exchange between N. equitans and I. hospitalis indicates that the relationship has impacted both genomes. This association is the simplest symbiotic system known to date and a unique model for studying mechanisms of interspecific relationships at the genomic and metabolic levels.

  4. Fusion of Taq DNA polymerase with single-stranded DNA binding-like protein of Nanoarchaeum equitans-Expression and characterization.

    Directory of Open Access Journals (Sweden)

    Marcin Olszewski

    Full Text Available DNA polymerases are present in all organisms and are important enzymes that synthesise DNA molecules. They are used in various fields of science, predominantly as essential components for in vitro DNA syntheses, known as PCR. Modern diagnostics, molecular biology and genetic engineering need DNA polymerases which demonstrate improved performance. This study was aimed at obtaining a new NeqSSB-TaqS fusion DNA polymerase from the Taq DNA Stoffel domain and a single-stranded DNA binding-like protein of Nanoarchaeum equitans in order to significantly improve the properties of DNA polymerase. The DNA coding sequence of Taq Stoffel DNA polymerase and the nonspecific DNA-binding protein of Nanoarchaeum equitans (NeqSSB-like protein were fused. A novel recombinant gene was obtained which was cloned into the pET-30 Ek/LIC vector and introduced into E. coli for expression. The recombinant enzyme was purified and its enzymatic properties including DNA polymerase activity, PCR amplification rate, thermostability, processivity and resistance to inhibitors, were tested. The yield of the target protein reached approximately 18 mg/l after 24 h of the IPTG induction. The specific activity of the polymerase was 2200 U/mg. The recombinant NeqSSB-TaqS exhibited a much higher extension rate (1000 bp template in 20 s, processivity (19 nt, thermostability (half-life 35 min at 95°C and higher tolerance to PCR inhibitors (0.3-1.25% of whole blood, 0.84-13.5 μg of lactoferrin and 4.7-150 ng of heparin than Taq Stoffel DNA polymerase. Furthermore, our studies show that NeqSSB-TaqS DNA polymerase has a high level of flexibility in relation to Mg2+ ions (from 1 to 5 mM and KCl or (NH42SO4 salts (more than 60 mM and 40 mM, respectively. Using NeqSSB-TaqS DNA polymerase instead of the Taq DNA polymerase could be a better choice in many PCR applications.

  5. Untargeted metabolomics studies employing NMR and LC-MS reveal metabolic coupling between Nanoarcheum equitans and its archaeal host Ignicoccus hospitalis. (United States)

    Hamerly, Timothy; Tripet, Brian P; Tigges, Michelle; Giannone, Richard J; Wurch, Louie; Hettich, Robert L; Podar, Mircea; Copié, Valerie; Bothner, Brian


    Interspecies interactions are the basis of microbial community formation and infectious diseases. Systems biology enables the construction of complex models describing such interactions, leading to a better understanding of disease states and communities. However, before interactions between complex organisms can be understood, metabolic and energetic implications of simpler real-world host-microbe systems must be worked out. To this effect, untargeted metabolomics experiments were conducted and integrated with proteomics data to characterize key molecular-level interactions between two hyperthermophilic microbial species, both of which have reduced genomes. Metabolic changes and transfer of metabolites between the archaea Ignicoccus hospitalis and Nanoarcheum equitans were investigated using integrated LC-MS and NMR metabolomics. The study of such a system is challenging, as no genetic tools are available, growth in the laboratory is challenging, and mechanisms by which they interact are unknown. Together with information about relative enzyme levels obtained from shotgun proteomics, the metabolomics data provided useful insights into metabolic pathways and cellular networks of I. hospitalis that are impacted by the presence of N. equitans , including arginine, isoleucine, and CTP biosynthesis. On the organismal level, the data indicate that N. equitans exploits metabolites generated by I. hospitalis to satisfy its own metabolic needs. This finding is based on N. equitans 's consumption of a significant fraction of the metabolite pool in I. hospitalis that cannot solely be attributed to increased biomass production for N. equitans . Combining LC-MS and NMR metabolomics datasets improved coverage of the metabolome and enhanced the identification and quantitation of cellular metabolites.

  6. From genomes to metabolomes: Understanding mechanisms of symbiosis and cell-cell signaling using the archaeal system Ignicoccus-Nanoarchaeum

    Energy Technology Data Exchange (ETDEWEB)

    Podar, Mircea [Univ. of Tennessee, Knoxville, TN (United States). Biosciences Division; Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hettich, Robert [Univ. of Tennessee, Knoxville, TN (United States). Biosciences Division; Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Copie, Valerie [Montana State Univ., Bozeman, MT (United States). Dept. of Chemistry and Biochemistry; Bothner, Brian [Montana State Univ., Bozeman, MT (United States). Dept. of Chemistry and Biochemistry


    The main objective of this project was to use symbiotic Nanoarchaeaota, a group of thermophilic Archaea that are obligate symbionts/parasites on other Archaea, to develop an integrated multi-omic approach to study inter-species interactions as well as to understand fundamental mechanism that enable such relationships. As part of this grant we have achieved a number of important milestone on both technical and scientific levels. On the technical side, we developed immunofluorescence labeling and tracking methods to follow Nanoarchaeota in cultures and in environmental samples, we applied such methods in conjunction with flow cytometry to quantify and isolate uncultured representatives from the environment and characterized them by single cell genomics. On the proteomics side, we developed a more efficient and sensitive method to recover and semi-quantitatively measure membrane proteins, while achieving high total cellular proteome coverage (70-80% of the predicted proteome). Metabolomic analyses used complementary NMR and LC/GC mass spectrometry and led to the identification of novel lipids in these organisms as well as quantification of some of the major metabolites. Importantly, using several informatics approaches we were also able to integrate the transcriptomic, proteomic and metabolomic datasets, revealing aspects of the interspecies interaction that were not evident in the single omic analyses (manuscript in review). On the science side we determined that N. equitans and I. hospitalis are metabolically coupled and that N. equitans is strictly dependent on its host both for metabolic precursors and energetic needs. The actual mechanism by which small molecules move across the cell membrane remains unknown. The Ignicoccus host responds to the metabolic and energetic burned by upregulating of key primary metabolism steps and ATP synthesis. The two species have co-evolved, aspect that we determined by comparative genomics with other species of Ignicoccus

  7. Creating standards: Creating illusions?

    DEFF Research Database (Denmark)

    Linneberg, Mai Skjøtt

    written standards may open up for the creation of illusions. These are created when written standards' content is not in accordance with the perception standard adopters and standard users have of the specific practice phenomenon's content. This general theoretical argument is exemplified by the specific...

  8. The tree of life might be rooted in the branch leading to Nanoarchaeota. (United States)

    Di Giulio, Massimo


    It is suggested that the tree of life might be rooted in the domain of the Archaea, in the branch leading to the phylum of Nanoarchaeota. This hypothesis seems to be corroborated by the uniqueness and ancestrality of some traits possessed by Nanoarchaeum equitans, such as split genes separately codifying for the 5' and 3' halves of the tRNA molecule. These half genes are the oldest ancestral form of gene we have ever seen. This, along with the absence of operons from the genome of N. equitans, would seem to indicate that this genome is a molecular fossil of the evolutionary stage which the ancestral genomes had reached when the first lines of divergence were established. Moreover, the late appearance of DNA coinciding with the rooting of the universal phylogenetic tree would make the genome of N. equitans a witness to this fundamental event.

  9. LHC Create

    CERN Multimedia

    CERN. Geneva


    LHC Create is an upcoming 2-day workshop held at IdeaSquare in November. Participants from CERN and IPAC school of design will compete to design an exhibit that explains why CERN does what it does. The winner will have their exhibit fully realised and made available to experiments, institutes, and tourism agencies around the world.

  10. Creating Poetry. (United States)

    Drury, John

    Encouraging exploration and practice, this book offers hundreds of exercises and numerous tips covering every step involved in creating poetry. Each chapter is a self-contained unit offering an overview of material in the chapter, a definition of terms, and poetry examples from well-known authors designed to supplement the numerous exercises.…

  11. Create Your Plate

    Medline Plus

    Full Text Available ... Plate Share Create Your Plate ! Share: Seven Simple Steps to Create Your Plate It's simple and effective ... foods within each food category. Try these seven steps to get started: Using your dinner plate, put ...

  12. Create Your Plate

    Medline Plus

    Full Text Available ... for Association Events Messaging Tools Recruiting Advocates Local Market Planning Training Webinars News & Events Advocacy News Call ... Meals > Create Your Plate Share: Print Page Text Size: A A A Listen En Español Create Your ...

  13. Create Your Plate

    Medline Plus

    Full Text Available ... of the differences in types of vegetables. When creating your plate at home, remember that half of ... effective for both managing diabetes and losing weight. Creating your plate lets you still choose the foods ...

  14. Create Your Plate

    Medline Plus

    Full Text Available ... In Memory In Honor Become a Member En Español Type 1 Type 2 About Us Online Community ... Page Text Size: A A A Listen En Español Create Your Plate Create Your Plate is a ...

  15. Create Your Plate

    Medline Plus

    Full Text Available ... Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart-Healthy Foods Holiday Meal Planning ... Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets ...

  16. Create Your Plate

    Medline Plus

    Full Text Available ... Planning Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart- ... Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy Foods ...

  17. Create Your Plate

    Medline Plus

    Full Text Available ... Planning Meals > Create Your Plate Share: Print Page Text Size: A A A Listen En Español Create ... Type 2 Education Series Hear audio clips and full recordings of past Q&A events at your ...

  18. Creating more effective graphs

    CERN Document Server

    Robbins, Naomi B


    A succinct and highly readable guide to creating effective graphs The right graph can be a powerful tool for communicating information, improving a presentation, or conveying your point in print. If your professional endeavors call for you to present data graphically, here's a book that can help you do it more effectively. Creating More Effective Graphs gives you the basic knowledge and techniques required to choose and create appropriate graphs for a broad range of applications. Using real-world examples everyone can relate to, the author draws on her years of experience in gr

  19. Create Your Plate

    Medline Plus

    Full Text Available ... Food Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy Foods donate en -- A Future Without Diabetes - a- ...

  20. Create Your Plate

    Medline Plus

    Full Text Available ... Risk Test Lower Your Risk Healthy Eating Overweight Smoking High Blood Pressure Physical Activity High Blood Glucose ... Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart- ...

  1. Create Your Plate

    Medline Plus

    Full Text Available ... Risk Test Lower Your Risk Healthy Eating Overweight Smoking High Blood Pressure Physical Activity High Blood Glucose ... Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets ...

  2. Create Your Plate

    Medline Plus

    Full Text Available ... Recipes Association Cookbook Recipes Planning Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning ... serving of dairy or both as your meal plan allows. Choose healthy fats in small amounts. For ...

  3. Create Your Plate

    Medline Plus

    Full Text Available ... Food MyFoodAdvisor Recipes Association Cookbook Recipes Planning Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart-Healthy Foods Holiday Meal ...

  4. Create Your Plate

    Medline Plus

    Full Text Available ... Index Low-Calorie Sweeteners Sugar and Desserts Fitness Exercise & Type 1 Diabetes Get Started Safely Get And ... Plate Create Your Plate is a simple and effective way to manage your blood glucose levels and ...

  5. Create Your Plate

    Medline Plus

    Full Text Available ... Us in the Fight for a Cure Your tax-deductible gift today can fund critical diabetes research ... Close > Food and Fitness > Food > Planning Meals > Create Your Plate Share: Print Page Text ...

  6. Create Your Plate

    Medline Plus

    Full Text Available ... critical diabetes research and support vital diabetes education services that improve the lives of those with diabetes. $50 $100 $250 $500 Other Other Ways ... Meals > Create Your Plate ...

  7. Create Your Plate

    Medline Plus

    Full Text Available ... Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with ... Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy ...

  8. Create Your Plate

    Medline Plus

    Full Text Available ... Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart-Healthy Foods Holiday Meal ... Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook ...

  9. Creating organizational cultures

    DEFF Research Database (Denmark)

    Mouton, Nicolaas T.O.; Just, Sine Nørholm; Gabrielsen, Jonas


    Purpose – The purpose of this paper is to re-conceptualize the relations between rhetorical strategies and material practices in the processes whereby leaders create or change organizational cultures. Design/methodology/approach – The authors compare and contrast two broad perspectives on cultural...... insights. The authors propose an integrated perspective in which material practices and rhetorical strategies are seen as two analytical sides of the same ontological coin. This enables a fuller and more detailed explanation of how organizational cultures are created or changed. A brief illustration...

  10. Creating Web Pages Simplified

    CERN Document Server

    Wooldridge, Mike


    The easiest way to learn how to create a Web page for your family or organization Do you want to share photos and family lore with relatives far away? Have you been put in charge of communication for your neighborhood group or nonprofit organization? A Web page is the way to get the word out, and Creating Web Pages Simplified offers an easy, visual way to learn how to build one. Full-color illustrations and concise instructions take you through all phases of Web publishing, from laying out and formatting text to enlivening pages with graphics and animation. This easy-to-follow visual guide sho

  11. Create Your Plate

    Medline Plus

    Full Text Available ... meal-planning, . In this section Food Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy Foods donate en -- A Future Without Diabetes - a-future-without-diabetes-2.html A Future ...

  12. Creating Customer Delight. (United States)

    Black, Jim


    This article proposes that college admissions officers interested in improving service should focus on creating customer delight rather than simply satisfaction, studying the system when things go wrong rather than placing blame, establishing employee well-being as the highest priority of the organization, providing necessary tools and training…

  13. Create Your Plate

    Medline Plus

    Full Text Available ... tool is not to scale because of the differences in types of vegetables. When creating your plate ... function (data) { $('#survey-errors').remove(); $('.survey-form .form-group .survey-alert-wrap').remove(); if (data.submitSurveyResponse.success == ' ...

  14. Creating Pupils' Internet Magazine (United States)

    Bognar, Branko; Šimic, Vesna


    This article presents an action research, which aimed to improve pupils' literary creativity and enable them to use computers connected to the internet. The study was conducted in a small district village school in Croatia. Creating a pupils' internet magazine appeared to be an excellent way for achieving the educational aims of almost all…

  15. Creating a Classroom Makerspace (United States)

    Rivas, Luz


    What is a makerspace? Makerspaces are community-operated physical spaces where people (makers) create do-it-yourself projects together. These membership spaces serve as community labs where people learn together and collaborate on projects. Makerspaces often have tools and equipment like 3-D printers, laser cutters, and soldering irons.…

  16. Create Your Plate

    Medline Plus

    Full Text Available ... 1 Type 2 About Us Online Community Meal Planning Sign In Search: Search More Sites Search ≡ Are ... Fitness Home Food MyFoodAdvisor Recipes Association Cookbook Recipes Planning Meals Diabetes Meal Plans Create Your Plate Gluten ...

  17. Creating White Australia

    DEFF Research Database (Denmark)

    McLisky, Claire Louise; Carey, Jane

    Vedtagelsen af White Australien som regeringens politik i 1901 viser, at hvidheden var afgørende for den måde, hvorpå den nye nation i Australien blev konstitueret. Og alligevel har historikere i vid udstrækning overset hvidhed i deres studier af Australiens race fortid. 'Creating White Australia...

  18. Creating Innovative Opportunities

    DEFF Research Database (Denmark)

    Ljungberg, Daniel; McKelvey, Maureen; Lassen, Astrid Heidemann


    This paper develops lessons about how and why the founders and ventures involved in knowledge intensive entrepreneurship (KIE) manage the process of venture creation. The meta-analysis of the 86 case studies is based upon as conceptual model (from a systemic literature review), linked to illustra...... of knowledge networks to create innovative opportunities....

  19. Create Your State (United States)

    Dunham, Kris; Melvin, Samantha


    Students are often encouraged to work together with their classmates, sometimes with other classes, occasionally with kids at other schools, but rarely with kids across the country. In this article the authors describe the Create Your State project, a collaborative nationwide project inspired by the Texas Chair Project wherein the artist, Damien…

  20. Creating a Third Culture (United States)

    Weisbuch, Robert A.


    In this article, the author laments higher education's lack of concern towards the development of teaching in the public schools over the last half of the 20th century. Most of academe's work on the topic of teacher training has been done at the branches of state universities that needed to make money and create a niche. The author observes that…

  1. Creating resilient SMEs

    DEFF Research Database (Denmark)

    Dahlberg, Rasmus; Guay, Fanny


    According to the EU, during the past five years, small and medium enterprises (SMEs) have created 85% of new jobs and two-thirds of private sector employment in the region. SMEs are considered the backbone of the economy in Europe and represent more than 95% of enterprises in USA and Australia....... They are considered more vulnerable to disasters because of their size. This paper argues, on the contrary, that SMEs also can be less vulnerable to sudden change than large corporations, drawing upon the ideas of Hayek and Taleb, and that networks of SMEs may contribute to the overall resilience of society...... if certain criteria are met. With this in mind, this paper will be examining how to create resilient SMEs. A well-known concept in the field is business continuity management. BCM is defined as “a holistic management process that identifies potential threats to an organization and the impacts to business...

  2. Creating flat design websites

    CERN Document Server

    Pratas, Antonio


    This book contains practical, step-by-step tutorials along with plenty of explanation about designing your flat website. Each section is introduced sequentially, building up your web design skills and completing your website.Creating Flat Design Websites is ideal for you if you are starting on your web development journey, but this book will also benefit seasoned developers wanting to start developing in flat.

  3. Creating a practice website. (United States)

    Downes, P K


    A website is a window to the outside world. For a dental practice, it may be the first point of contact for a prospective new patient and will therefore provide them with their 'first impression'; this may be days or weeks before actually visiting the practice. This section considers the different ways of creating a dental practice website and lists some of the main dental website design companies. It also describes what factors make a successful website and offers advice on how to ensure that it complies with current regulations and recommendations.

  4. Creating corporate advantage. (United States)

    Collis, D J; Montgomery, C A


    What differentiates truly great corporate strategies from the merely adequate? How can executives at the corporate level create tangible advantage for their businesses that makes the whole more than the sum of the parts? This article presents a comprehensive framework for value creation in the multibusiness company. It addresses the most fundamental questions of corporate strategy: What businesses should a company be in? How should it coordinate activities across businesses? What role should the corporate office play? How should the corporation measure and control performance? Through detailed case studies of Tyco International, Sharp, the Newell Company, and Saatchi and Saatchi, the authors demonstrate that the answers to all those questions are driven largely by the nature of a company's special resources--its assets, skills, and capabilities. These range along a continuum from the highly specialized at one end to the very general at the other. A corporation's location on the continuum constrains the set of businesses it should compete in and limits its choices about the design of its organization. Applying the framework, the authors point out the common mistakes that result from misaligned corporate strategies. Companies mistakenly enter businesses based on similarities in products rather than the resources that contribute to competitive advantage in each business. Instead of tailoring organizational structures and systems to the needs of a particular strategy, they create plain-vanilla corporate offices and infrastructures. The company examples demonstrate that one size does not fit all. One can find great corporate strategies all along the continuum.

  5. Creating sustainable performance. (United States)

    Spreitzer, Gretchen; Porath, Christine


    What makes for sustainable individual and organizational performance? Employees who are thriving-not just satisfied and productive but also engaged in creating the future. The authors found that people who fit this description demonstrated 16% better overall performance, 125% less burnout, 32% more commitment to the organization, and 46% more job satisfaction than their peers. Thriving has two components: vitality, or the sense of being alive and excited, and learning, or the growth that comes from gaining knowledge and skills. Some people naturally build vitality and learning into their jobs, but most employees are influenced by their environment. Four mechanisms, none of which requires heroic effort or major resources, create the conditions for thriving: providing decision-making discretion, sharing information about the organization and its strategy, minimizing incivility, and offering performance feedback. Organizations such as Alaska Airlines, Zingerman's, Quicken Loans, and Caiman Consulting have found that helping people grow and remain energized at work is valiant on its own merits-but it can also boost performance in a sustainable way.

  6. Creating With Carbon (United States)


    A subsidiary of SI Diamond Technology, Inc., Applied Nanotech, of Austin, Texas, is creating a buzz among various technology firms and venture capital groups interested in the company s progressive research on carbon-related field emission devices, including carbon nanotubes, filaments of pure carbon less than one ten-thousandth the width of human hair. Since their discovery in 1991, carbon nanotubes have gained considerable attention due to their unique physical properties. For example, a single perfect carbon nanotube can range from 10 to 100 times stronger than steel, per unit weight. Recent studies also indicate that the nanotubes may be the best heat-conducting material in existence. These properties, combined with the ease of growing thin films or nanotubes by a variety of deposition techniques, make the carbon-based material one of the most desirable for cold field emission cathodes.

  7. Creating the living brand. (United States)

    Bendapudi, Neeli; Bendapudi, Venkat


    It's easy to conclude from the literature and the lore that top-notch customer service is the province of a few luxury companies and that any retailer outside that rarefied atmosphere is condemned to offer mediocre service at best. But even companies that position themselves for the mass market can provide outstanding customer-employee interactions and profit from them, if they train employees to reflect the brand's core values. The authors studied the convenience store industry in depth and focused on two that have developed a devoted following: QuikTrip (QT) and Wawa. Turnover rates at QT and Wawa are 14% and 22% respectively, much lower than the typical rate in retail. The authors found six principles that both firms embrace to create a strong culture of customer service. Know what you're looking for: A focus on candidates' intrinsic traits allows the companies to hire people who will naturally bring the right qualities to the job. Make the most of talent: In mass-market retail, talent is generally viewed as a commodity, but that outlook becomes a self-fulfilling prophesy. Create pride in the brand: Service quality depends directly on employees' attachment to the brand. Build community: Wawa and QT have made concerted efforts to build customer loyalty through a sense of community. Share the business context: Employees need a clear understanding of how their company operates and how it defines success. Satisfy the soul: To win an employee's passionate engagement, a company must meet his or her needs for security, esteem, and justice.

  8. Creating an outcomes framework. (United States)

    Doerge, J B


    Four constructs used to build a framework for outcomes management for a large midwestern tertiary hospital are described in this article. A system framework outlining a model of clinical integration and population management based in Steven Shortell's work is discussed. This framework includes key definitions of high-risk patients, target groups, populations and community. Roles for each level of population management and how they were implemented in the health care system are described. A point of service framework centered on seven dimensions of care is the next construct applied on each nursing unit. The third construct outlines the framework for role development. Three roles for nursing were created to implement strategies for target groups that are strategic disease categories; two of those roles are described in depth. The philosophy of nursing practice is centered on caring and existential advocacy. The final construct is the modification of the Dartmouth model as a common framework for outcomes. System applications of the scorecard and lessons learned in the 2-year process of implementation are shared

  9. Creating a disability mythology. (United States)

    Brown, S E


    People with disabilities have, for the most part, failed to identify with each other as a group. This has been detrimental because it has built a sense of isolation when a camaraderie based upon existing commonalities could have been developed. During the past ten to twenty years, there has been a great deal of discussion about appropriate language to use when discussing disability issues. This discussion has been a part of a larger debate concerning the existence of a disability culture. I believe that there is indeed a disability culture and I am a proponent of identifying and passing on stories which contribute to that culture. I have chosen to use mythology to convey this message and have begun with a focus on heroes - people who do something out of the ordinary. It is contended that almost all people with disabilities have performed heroic activities because of the pervasive discrimination encountered by each individual with a disability. Creating a disability mythology is an attempt to recognize and promote heroes within the disabled community and to advocate the importance of telling other people how positive change has occurred through instances of individual heroism.

  10. Creating a Social World (United States)

    Kendler, Kenneth S.; Jacobson, Kristen C.; Gardner, Charles O.; Gillespie, Nathan; Aggen, Steven A.; Prescott, Carol A.


    Context Peer-group deviance is strongly associated with externalizing behaviors. We have limited knowledge of the sources of individual differences in peer-group deviance. Objective To clarify genetic and environmental contributions to peer-group deviance in twins from mid-childhood through early adulthood. Design Retrospective assessments using a life-history calendar. Analysis by biometric growth curves. Setting General community. Participants Members of male-male pairs from the population-based Virginia Twin Registry personally interviewed in 1998–2004 (n=1802). Main Outcome Measure Self-reported peer-group deviance at ages 8 to 11, 12 to 14, 15 to 17, 18 to 21, and 22 to 25 years. Results Mean and variance of peer-group deviance increased substantially with age. Genetic effects on peer-group deviance showed a strong and steady increase over time. Family environment generally declined in importance over time. Individual-specific environmental influences on peer-group deviance levels were stable in the first 3 age periods and then increased as most twins left home. When standardized, the heritability of peer-group deviance is approximately 30% at ages 8 to 11 years and rises to approximately 50% across the last 3 time periods. Both genes and shared environment contributed to individual differences in the developmental trajectory of peer-group deviance. However, while the correlation between childhood peer-group deviance levels and the subsequent slope of peer-group deviance over time resulting from genetic factors was positive, the same relationship resulting from shared environmental factors was negative. Conclusions As male twins mature and create their own social worlds, genetic factors play an increasingly important role in their choice of peers, while shared environment becomes less influential. The individual specific environment increases in importance when individuals leave home. Individuals who have deviant peers in childhood, as a result of genetic vs

  11. Insights into archaeal evolution and symbiosis from the genomes of a nanoarchaeon and its inferred crenarchaeal host from Obsidian Pool, Yellowstone National Park. (United States)

    Podar, Mircea; Makarova, Kira S; Graham, David E; Wolf, Yuri I; Koonin, Eugene V; Reysenbach, Anna-Louise


    A single cultured marine organism, Nanoarchaeum equitans, represents the Nanoarchaeota branch of symbiotic Archaea, with a highly reduced genome and unusual features such as multiple split genes. The first terrestrial hyperthermophilic member of the Nanoarchaeota was collected from Obsidian Pool, a thermal feature in Yellowstone National Park, separated by single cell isolation, and sequenced together with its putative host, a Sulfolobales archaeon. Both the new Nanoarchaeota (Nst1) and N. equitans lack most biosynthetic capabilities, and phylogenetic analysis of ribosomal RNA and protein sequences indicates that the two form a deep-branching archaeal lineage. However, the Nst1 genome is more than 20% larger, and encodes a complete gluconeogenesis pathway as well as the full complement of archaeal flagellum proteins. With a larger genome, a smaller repertoire of split protein encoding genes and no split non-contiguous tRNAs, Nst1 appears to have experienced less severe genome reduction than N. equitans. These findings imply that, rather than representing ancestral characters, the extremely compact genomes and multiple split genes of Nanoarchaeota are derived characters associated with their symbiotic or parasitic lifestyle. The inferred host of Nst1 is potentially autotrophic, with a streamlined genome and simplified central and energetic metabolism as compared to other Sulfolobales. Comparison of the N. equitans and Nst1 genomes suggests that the marine and terrestrial lineages of Nanoarchaeota share a common ancestor that was already a symbiont of another archaeon. The two distinct Nanoarchaeota-host genomic data sets offer novel insights into the evolution of archaeal symbiosis and parasitism, enabling further studies of the cellular and molecular mechanisms of these relationships. This article was reviewed by Patrick Forterre, Bettina Siebers (nominated by Michael Galperin) and Purification Lopez-Garcia.

  12. Creating a family health history (United States)

    ... this page: // Creating a family health history To use the sharing ... Many health problems tend to run in families. Creating a family history can help you and your ...

  13. Creating

    DEFF Research Database (Denmark)

    Andersen, Kristina Vaarst; Lorenzen, Mark; Laursen, Stine


    This unique book reveals the procedural aspects of knowledge-based urban planning, development and assessment. Concentrating on major knowledge city building processes, and providing state-of-the-art experiences and perspectives, this important compendium explores innovative models, approaches an...

  14. Genomics-informed isolation and characterization of a symbiotic Nanoarchaeota system from a terrestrial geothermal environment. (United States)

    Wurch, Louie; Giannone, Richard J; Belisle, Bernard S; Swift, Carolyn; Utturkar, Sagar; Hettich, Robert L; Reysenbach, Anna-Louise; Podar, Mircea


    Biological features can be inferred, based on genomic data, for many microbial lineages that remain uncultured. However, cultivation is important for characterizing an organism's physiology and testing its genome-encoded potential. Here we use single-cell genomics to infer cultivation conditions for the isolation of an ectosymbiotic Nanoarchaeota ('Nanopusillus acidilobi') and its host (Acidilobus, a crenarchaeote) from a terrestrial geothermal environment. The cells of 'Nanopusillus' are among the smallest known cellular organisms (100-300 nm). They appear to have a complete genetic information processing machinery, but lack almost all primary biosynthetic functions as well as respiration and ATP synthesis. Genomic and proteomic comparison with its distant relative, the marine Nanoarchaeum equitans illustrate an ancient, common evolutionary history of adaptation of the Nanoarchaeota to ectosymbiosis, so far unique among the Archaea.

  15. Creating Interdisciplinarity within Monodisciplinary Structures

    DEFF Research Database (Denmark)

    Lindvig, Katrine

    discrepancies in the use of the term interdisciplinarity, which have repercussions for the practices and incentives of creating interdisciplinary education, research and collaboration. Overall, the thesis shows that interdisciplinary teaching and learning practices have to engage in a continuous balancing...

  16. Positive effects of creating mandalas


    Toroš, Maja


    The purpose of the present master’s thesis is to examine the psychological effects of creating mandalas and to give recommendations for a better use of the mandalas in the practice of art assistance in order to help in this way others and oneself. Mandalas are sacred symbols, used in Hinduism and Buddhist religion practices as tools for meditation and concentration. They are geometrical representations of the creation of the cosmos and schemas of all that was created. Jung sat the foundations...

  17. Creating visual explanations improves learning. (United States)

    Bobek, Eliza; Tversky, Barbara


    Many topics in science are notoriously difficult for students to learn. Mechanisms and processes outside student experience present particular challenges. While instruction typically involves visualizations, students usually explain in words. Because visual explanations can show parts and processes of complex systems directly, creating them should have benefits beyond creating verbal explanations. We compared learning from creating visual or verbal explanations for two STEM domains, a mechanical system (bicycle pump) and a chemical system (bonding). Both kinds of explanations were analyzed for content and learning assess by a post-test. For the mechanical system, creating a visual explanation increased understanding particularly for participants of low spatial ability. For the chemical system, creating both visual and verbal explanations improved learning without new teaching. Creating a visual explanation was superior and benefitted participants of both high and low spatial ability. Visual explanations often included crucial yet invisible features. The greater effectiveness of visual explanations appears attributable to the checks they provide for completeness and coherence as well as to their roles as platforms for inference. The benefits should generalize to other domains like the social sciences, history, and archeology where important information can be visualized. Together, the findings provide support for the use of learner-generated visual explanations as a powerful learning tool.

  18. On Creating and Sustaining Alternatives

    DEFF Research Database (Denmark)

    Kyng, Morten


    This paper presents and discusses an initiative aimed at creating direct and long lasting influence on the use and development of telemedicine and telehealth by healthcare professionals, patients and citizens. The initiative draws on ideas, insights, and lessons learned from Participatory Design...... (PD) as well as from innovation theory and software ecosystems. Last, but not least, the ongoing debate on public finances/economy versus tax evasion by major private companies has been an important element in shaping the vision and creating support for the initiative. This vision is about democratic...

  19. Journaling: creating space for "I". (United States)

    Charles, Jennell P


    As nurses engaged in a caring profession, it is critical that we learn not only to care for others but also to care for ourselves. To care effectively for ourselves, we must create the space and time in which to do this. Journaling is one tool that scholars offer as a way to create this space. Although there is no clear consensus about the best techniques for journaling, there is evidence that journaling, as a reflective, meditative activity, can promote creativity, self-awareness, and personal development.

  20. Intentionality, consciousness, and creating community. (United States)

    Malinski, Violet M


    Intentionality is briefly explored from the perspective of seminal written works on therapeutic touch and recorded conversations with Martha E. Rogers. This overview hints at possible interrelationships among intentionality, consciousness, and creating community, along with conceptual ambiguities, which are explored in detail by Zahourek and Larkin in this column.

  1. We create our own reality

    CERN Multimedia


    " Yes, we create our own reality. This is one of the most fundamental tenets of the ancient oriental religions, such as Buddhism. And during the last century, modern particle physics or quantum mechanics has discovered exactly the same thing" (1 page).

  2. Creating Space for Children's Literature (United States)

    Serafini, Frank


    As teachers struggle to balance the needs of their students with the requirements of commercial reading materials, educators need to consider how teachers will create space for children's literature in today's classrooms. In this article, 10 practical recommendations for incorporating children's literature in the reading instructional framework…

  3. Creating an Innovative Learning Organization (United States)

    Salisbury, Mark


    This article describes how to create an innovative learning (iLearning) organization. It begins by discussing the life cycle of knowledge in an organization, followed by a description of the theoretical foundation for iLearning. Next, the article presents an example of iLearning, followed by a description of the distributed nature of work, the…

  4. Creating a New Teaching Profession (United States)

    Goldhaber, Dan, Ed.; Hannaway, Jane, Ed.


    Considering that having a quality teacher is the foremost in-school predictor of students' success, ensuring teacher excellence is vital to the nation's educational system. In "Creating a New Teaching Profession," diverse scholars assess the state of human capital development in the teaching profession today and how to progress.

  5. Leadership Networking Connect, Collaborate, Create

    CERN Document Server

    (CCL), Center for Creative Leadership; Baldwin, David


    Networking is essential to effective leadership in today's organizations. Leaders who are skilled networkers have access to people, information, and resources to help solve problems and create opportunities. Leaders who neglect their networks are missing out on a critical component of their role as leaders. This book will help leaders take a new view of networking and provide insight into how to enhance their networks and become effective at leadership networking.

  6. Rescuing Those Left Behind: Recovering and Characterizing Underdigested Membrane and Hydrophobic Proteins To Enhance Proteome Measurement Depth. (United States)

    Giannone, Richard J; Wurch, Louie L; Podar, Mircea; Hettich, Robert L


    The marine archaeon Nanoarchaeum equitans is dependent on direct physical contact with its host, the hyperthermophile Ignicoccus hospitalis. As this interaction is thought to be membrane-associated, involving a myriad of membrane-anchored proteins, proteomic efforts to better characterize this difficult to analyze interface are paramount to uncovering the mechanism of their association. By extending multienzyme digestion strategies that use sample filtration to recover underdigested proteins for reprocessing/consecutive proteolytic digestion, we applied chymotrypsin to redigest the proteinaceous material left over after initial proteolysis with trypsin of sodium dodecyl sulfate (SDS)-extracted I. hospitalis-N. equitans proteins. Using this method, we show that proteins with increased hydrophobic character, including membrane proteins with multiple transmembrane helices, are enriched and recovered in the underdigested fraction. Chymotryptic reprocessing provided significant sequence coverage gains in both soluble and hydrophobic proteins alike, with the latter benefiting more so in terms of membrane protein representation. These gains were despite a large proportion of high-quality peptide spectra remaining unassigned in the underdigested fraction suggesting high levels of protein modification on these often surface-exposed proteins. Importantly, these gains were achieved without applying extensive fractionation strategies usually required for thorough characterization of membrane-associated proteins and were facilitated by the generation of a distinct, complementary set of peptides that aid in both the identification and quantitation of this important, under-represented class of proteins.

  7. Insights into archaeal evolution and symbiosis from the genomes of a Nanoarchaeon and its crenarchaeal host from Yellowstone National Park

    Energy Technology Data Exchange (ETDEWEB)

    Podar, Mircea [ORNL; Graham, David E [ORNL; Reysenbach, Anna-Louise [Portland State University; Koonin, Eugene [National Center for Biotechnology Information; Wolf, Yuri [National Center for Biotechnology Information; Makarova, Kira S. [National Center for Biotechnology Information


    A hyperthemophilic member of the Nanoarchaeota from Obsidian Pool, a thermal feature in Yellowstone National Park was characterized using single cell isolation and sequencing, together with its putative host, a Sulfolobales archaeon. This first representative of a non-marine Nanoarchaeota (Nst1) resembles Nanoarchaeum equitans by lacking most biosynthetic capabilities, the two forming a deep-branching archaeal lineage. However, the Nst1 genome is over 20% larger, encodes a complete gluconeogenesis pathway and a full complement of archaeal flagellum proteins. Comparison of the two genomes suggests that the marine and terrestrial Nanoarchaeota lineages share a common ancestor that was already a symbiont of another archaeon. With a larger genome, a smaller repertoire of split protein encoding genes and no split non-contiguous tRNAs, Nst1 appears to have experienced less severe genome reduction than N. equitans. The inferred host of Nst1 is potentially autotrophic, with a streamlined genome and simplified central and energetic metabolism as compared to other Sulfolobales. The two distinct Nanoarchaeota-host genomic data sets offer insights into the evolution of archaeal symbiosis and parasitism and will further enable studies of the cellular and molecular mechanisms of these relationships.

  8. Creating a digital medical illustration. (United States)

    Culley, Joanna


    This paper covers the steps required to complete a medical illustration in a digital format using Adobe Illustrator and Photoshop. The project example is the surgical procedure for the release of the glenohumeral joint for the condition known as 'frozen shoulder'. The purpose is to demonstrate one method which an artist can use within digital media to create a colour illustration such as the release of the glenohumeral joint. Included is a general overview as how to deal with the administration of a medical illustration commission through the experience of a professional freelance artist.

  9. Creating Cross-disciplinary Courses. (United States)

    Reynolds, Elaine R


    Because of its focus on the biological underpinnings of action and behavior, neuroscience intersects with many fields of human endeavor. Some of these cross-disciplinary intersections have been long standing, while others, such as neurotheology or neuroeconomics, are more recently formed fields. Many undergraduate institutions have sought to include cross-disciplinary courses in their curriculum because this style of pedagogy is often seen as applicable to real world problems. However, it can be difficult for faculty with specialized training within their discipline to expand beyond their own fields to offer cross-disciplinary courses. I have been creating a series of multi- or cross-disciplinary courses and have found some strategies that have helped me successfully teach these classes. I will discuss general strategies and tools in developing these types of courses including: 1) creating mixed experience classrooms of students and contributing faculty 2) finding the right tools that will allow you to teach to a mixed population without prerequisites 3) examining the topic using multiple disciplinary perspectives 4) feeding off student experience and interest 5) assessing the impact of these courses on student outcomes and your neuroscience program. This last tool in particular is important in establishing the validity of this type of teaching for neuroscience students and the general student population.

  10. Creating your own leadership brand. (United States)

    Kerfoot, Karlene


    Building equity in a brand happens through many encounters. The initial attraction must be followed by the meeting of expectations. This creates a loyalty that is part of an emotional connection to that brand. This is the same process people go through when they first meet a leader and decide if this is a person they want to buy into. People will examine your style, your competence, and your standards. If you fail on any of these fronts, your ability to lead will be severely compromised. People expect more of leaders now, because they know and recognize good leaders. And, predictably, people are now more cynical of leaders because of the well-publicized excess of a few leaders who advanced their own causes at the expense of their people and their financial future. This will turn out to be a good thing, because it will create a higher standard of leadership that all must aspire to achieve. When the bar is raised for us, our standards of performance are also raised.

  11. Creating nanoscale emulsions using condensation. (United States)

    Guha, Ingrid F; Anand, Sushant; Varanasi, Kripa K


    Nanoscale emulsions are essential components in numerous products, ranging from processed foods to novel drug delivery systems. Existing emulsification methods rely either on the breakup of larger droplets or solvent exchange/inversion. Here we report a simple, scalable method of creating nanoscale water-in-oil emulsions by condensing water vapor onto a subcooled oil-surfactant solution. Our technique enables a bottom-up approach to forming small-scale emulsions. Nanoscale water droplets nucleate at the oil/air interface and spontaneously disperse within the oil, due to the spreading dynamics of oil on water. Oil-soluble surfactants stabilize the resulting emulsions. We find that the oil-surfactant concentration controls the spreading behavior of oil on water, as well as the peak size, polydispersity, and stability of the resulting emulsions. Using condensation, we form emulsions with peak radii around 100 nm and polydispersities around 10%. This emulsion formation technique may open different routes to creating emulsions, colloidal systems, and emulsion-based materials.


    Directory of Open Access Journals (Sweden)

    Umral Deveci


    Full Text Available Human beings, who perceive the reality of death however who do not know when it will happen, begin their life with this deficiency. Therefore, throughout their lives, they struggle to consummate and make up for the things that they perceive as deficiency or shortcomings through different ways. Humor is one of these means. The fact that deficiencies are eliminated results in superiority and relaxation. The sense of humor and relaxation simultaneously provide laughter. When theories of humor such as superiority, incongruous and relief are taken into consideration, it seems that these theories are related and support each other. Each text is whole with its form and content, which should be evaluated as a whole as much as possible. Hence this study dwells on shortcomings in jokes and in the lights of these shortcomings and theories of humor, it is intended tomake humor in stories, in terms of structural and semantic context, more concrete. Five stories/jokes randomly selected through samples are analyzed in this article. There are two basic types of opposition. The firstone is opposition that creates situation, the second one is thatcreates laughter. The first opposition depicts the shortcomings of knowledge, skill, patience arrogance and jealousyand prepares the second opposition. The opposition that creates laughter make up for shortcomings through cause and effect relationship and laughter comes out.

  13. Creating an effective poster presentation. (United States)

    Taggart, H M; Arslanian, C


    One way to build knowledge in nursing is to share research findings or clinical program outcomes. The dissemination of these findings is often a difficult final step in a project that has taken months or years to complete. One method of sharing findings in a relaxed and informal setting is a poster presentation. This method is an effective form for presenting findings using an interactive approach. The milieu of a poster presentation enables the presenters to interact and dialogue with colleagues. Guidelines for size and format require that the poster is clear and informative. Application of design helps to create visually appealing posters. This article summarizes elements of designing and conducting a poster presentation.

  14. Supporting SMEs in creating jobs

    Directory of Open Access Journals (Sweden)

    Daniela PASNICU


    Full Text Available SMEs are the most dynamic sector of the economy, representing a key factor in employment growth. Although SMEs have been severely affected by the economic crisis from 2008, they continue to be a more and more important source of generating jobs, regardless of size class. Given the differentiated contribution of SMEs to job creation as a result of their heterogeneity, the article analyses the dynamics of staff in enterprises by size classes and activities of the national economy. The statistical analysis is followed by a SWOT analysis of policies and tools to support SMEs in creating jobs both with direct action - management, recruitment, training and indirectly action by addressing general business issues. Measures that support the economic growth of SMEs through internationalization, innovation and improved access to finance foster competitiveness and, implicitly, the creation of new jobs.

  15. Creating breakthroughs at 3M. (United States)

    von Hippel, E; Thomke, S; Sonnack, M


    Most senior managers want their product development teams to create break-throughs--new products that will allow their companies to grow rapidly and maintain high margins. But more often they get incremental improvements to existing products. That's partly because companies must compete in the short term. Searching for breakthroughs is expensive and time consuming; line extensions can help the bottom line immediately. In addition, developers simply don't know how to achieve breakthroughs, and there is usually no system in place to guide them. By the mid-1990s, the lack of such a system was a problem even for an innovative company like 3M. Then a project team in 3M's Medical-Surgical Markets Division became acquainted with a method for developing breakthrough products: the lead user process. The process is based on the fact that many commercially important products are initially thought of and even prototyped by "lead users"--companies, organizations, or individuals that are well ahead of market trends. Their needs are so far beyond those of the average user that lead users create innovations on their own that may later contribute to commercially attractive breakthroughs. The lead user process transforms the job of inventing breakthroughs into a systematic task of identifying lead users and learning from them. The authors explain the process and how the 3M project team successfully navigated through it. In the end, the team proposed three major new product lines and a change in the division's strategy that has led to the development of breakthrough products. And now several more divisions are using the process to break away from incrementalism.

  16. Creating responsible partnerships in tourism

    Directory of Open Access Journals (Sweden)

    Ana Spitzer


    Full Text Available RQ: Organisations do not provide sufficient time and effort to seek out companies for partners that would, with the assistance of responsible cooperation, contribute to better quality offers and consequently to increased income and the good reputation of both companies. Responsibilities and ethics is where organizations on bothsides would take on and accept their own norms, tasks, obligations and be aware that in a relationship there is a need to give explanations and justify one’s actions, such partnerships will be long and prosperous. This requires a great deal of knowledge and maturity together with a very important personal characteristic that is care. This study examines whether the creation of long term partnerships through responsible and more personal (friendlyrelations brings the organization to greater success.Purpose: The purpose of this research is to determine how important it is for organizations in the tourism industry to build long term relationships, what it should be based on and whether companies are willing to change the current methods of operations.Method: The method of research was an interview with individuals that had a certain position within a tourism company and had contacts with partners and were obligated to see out new ones. A paradigm model was built and the responses analysed.Results: The survey results are encouraging. The interviews showed that respondents were aware that it is necessary to have long term and responsible partnerships. They recognized that in today’s world there is a lack of collaboration that is based on understanding andthat there should be more relations on a personal level. It isrequired that this changes in the future. The participants specifically highlight financial irresponsibility in many companies that destroys collaboration.Organization: With the help of this study, the author attempts to contribute ideas to organizations on how to create solid collaboration with partners, as

  17. Creating experimental color harmony map (United States)

    Chamaret, Christel; Urban, Fabrice; Lepinel, Josselin


    Starting in the 17th century with Newton, color harmony is a topic that did not reach a consensus on definition, representation or modeling so far. Previous work highlighted specific characteristics for color harmony on com- bination of color doublets or triplets by means of a human rating on a harmony scale. However, there were no investigation involving complex stimuli or pointing out how harmony is spatially located within a picture. The modeling of such concept as well as a reliable ground-truth would be of high value for the community, since the applications are wide and concern several communities: from psychology to computer graphics. We propose a protocol for creating color harmony maps from a controlled experiment. Through an eye-tracking protocol, we focus on the identification of disharmonious colors in pictures. The experiment was composed of a free viewing pass in order to let the observer be familiar with the content before a second pass where we asked "to search for the most disharmonious areas in the picture". Twenty-seven observers participated to the experiments that was composed of a total of 30 different stimuli. The high inter-observer agreement as well as a cross-validation confirm the validity of the proposed ground-truth.

  18. Creating a winning organizational culture. (United States)

    Campbell, Robert James


    This article explores the idea of how to create a winning organizational culture. By definition, a winning organizational culture is one that is able to make current innovations stick, while continuously changing based on the demands of the marketplace. More importantly, the article explores the notion that a winning organizational culture can have a profound impact on the conscious of the workforce, helping each individual to become a better, more productive person, who provides important services and products to the community. To form a basis toward defining the structure of what a winning organization culture looks like, 4 experts were asked 12 questions related to the development of an organizational culture. Three of the experts have worked intimately within the health care industry, while a fourth has been charged with turning around an organization that has had a losing culture for 17 years. The article provides insight into the role that values, norms, goals, leadership style, familiarity, and hiring practices play in developing a winning organizational culture. The article also emphasizes the important role that leaders perform in developing an organizational culture.

  19. Creating and Viewing HTML Files with Python

    Directory of Open Access Journals (Sweden)

    William J. Turkel


    Full Text Available This lesson uses Python to create and view an HTML file. If you write programs that output HTML, you can use any browser to look at your results. This is especially convenient if your program is automatically creating hyperlinks or graphic entities like charts and diagrams. Here you will learn how to create HTML files with Python scripts, and how to use Python to automatically open an HTML file in Firefox.

  20. Creating and Viewing HTML Files with Python


    William J. Turkel; Adam Crymble


    This lesson uses Python to create and view an HTML file. If you write programs that output HTML, you can use any browser to look at your results. This is especially convenient if your program is automatically creating hyperlinks or graphic entities like charts and diagrams. Here you will learn how to create HTML files with Python scripts, and how to use Python to automatically open an HTML file in Firefox.

  1. Creating Gaze Annotations in Head Mounted Displays

    DEFF Research Database (Denmark)

    Mardanbeigi, Diako; Qvarfordt, Pernilla


    To facilitate distributed communication in mobile settings, we developed GazeNote for creating and sharing gaze annotations in head mounted displays (HMDs). With gaze annotations it possible to point out objects of interest within an image and add a verbal description. To create an annota- tion...

  2. Creating Safe Spaces for Music Learning (United States)

    Hendricks, Karin S.; Smith, Tawnya D.; Stanuch, Jennifer


    This article offers a practical model for fostering emotionally safe learning environments that instill in music students a positive sense of self-belief, freedom, and purpose. The authors examine the implications for music educators of creating effective learning environments and present recommendations for creating a safe space for learning,…

  3. Creating mobile apps with Appcelerator Titanium

    CERN Document Server

    Brousseau, Christian


    Creating Mobile Apps with Appcelerator Titanium provides a hands-on approach and working examples on creating apps and games as well as embedding them onto a social networking website. Developers can then move on from there to develop their own applications based on the ones they have developed throughout the course of this book.""Creating Mobile Apps with Appcelerator Titanium"" is for developers who have experience with modern languages and development environments. Also, if you are familiar with the concepts of Object-oriented Programming (OOP), reusable components, AJAX closures, and so on

  4. Creating Web Sites The Missing Manual

    CERN Document Server

    MacDonald, Matthew


    Think you have to be a technical wizard to build a great web site? Think again. For anyone who wants to create an engaging web site--for either personal or business purposes--Creating Web Sites: The Missing Manual demystifies the process and provides tools, techniques, and expert guidance for developing a professional and reliable web presence. Like every Missing Manual, you can count on Creating Web Sites: The Missing Manual to be entertaining and insightful and complete with all the vital information, clear-headed advice, and detailed instructions you need to master the task at hand. Autho

  5. Creating Future Memories: A Dialogue on Process

    DEFF Research Database (Denmark)

    Rehder, Mads Middelboe


    This contribution documents the generative method we used to create a two-day public workshop on archiving digital memory, which occurred in April 2016 at the Counterplay Festival in Aarhus. Our group members, collectively known as the Futuremaking group created two distinct experiences. The “Help...... Desk of the Future” was created as a means of acting out how unhelpful many helpdesks actually are and to imagine how algorithms may be positioning our futures for us. The Museum of Random Memory functioned as a pop-up curatorial event where participants could offer up memories, experiences...

  6. Creating Space Plasma from the Ground (United States)


    AFRL-AFOSR-VA-TR-2016-0179 CREATING SPACE PLASMA FROM THE GROUND Herbert C Carlson UTAH STATE UNIVERSITY Final Report 05/12/2016 DISTRIBUTION A...DATE (DD-MM-YYYY) 05/14/2016 2. REPORT TYPE Final 3. DATES COVERED (From - To) 08/14/2012-05/14/2016 4. TITLE AND SUBTITLE Creating space plasma from...Report (2016) Creating Space Plasma from the Ground Grant FA9550-11-1-0236 AFOSR Program Manager Dr. Kent Miller PI: Herbert C. Carlson Center for

  7. A summary of the CMS Create event

    CERN Multimedia

    CERN. Geneva; GASTAL, Martin


    The maiden CMS Create event took place in November 2015 and was a huge success. The output from all the participants was fantastic. As organisers we learnt a lot and hope to build on our experience for the 2016 event!

  8. Towards Creating Sustainable Ecotourism Interventions: Practical ...

    African Journals Online (AJOL)


    May 1, 2017 ... Keywords: Tourism, Development, Livelihoods, Assets, Adaptive .... widely reported in the Ghanaian media that farmers in some ..... created an outlet for revenue which, when accrued, was invested prudently in social.

  9. Taking medicine at home - create a routine (United States)

    ... page: // Taking medicine at home - create a routine To use the ... teeth. Find Ways to Help You Remember Your Medicines You can: Set the alarm on your clock, ...

  10. More Sci- than Fi, Physicists Create Antimatter

    CERN Multimedia

    Overbye, Dennis


    Physicists working in Europe announced yesterday that they had passed through nature's looking glass and had created atoms made of antimatter, or antiatoms, opening up the possibility of experiments in a realm once reserved for science fiction writers (5 pages)

  11. Creating Healthy Environments For Youth Athletes (United States)

    EPA has created a presentation and companion checklist to help coaches and athletic administrators better understand the environmental health risks associated with youth sports and the steps they can follow to protect young athletes.

  12. Creating Great Neighborhoods: Density in Your Community (United States)

    This report highlights nine community-led efforts to create vibrant neighborhoods through density, discusses the connections between smart growth and density, and introduces design principles to ensure that density becomes a community asset.

  13. Creating an Economically Enabling and Competitive Business ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Creating an Economically Enabling and Competitive Business Environment in the ... the scope of operations of private sector enterprises in the West Bank and Gaza. ... IWRA/IDRC webinar on climate change and adaptive water management.

  14. ICT and Pragmatism: Creating sustainable Employment for ...

    African Journals Online (AJOL)


    effort to create self employment, this can galvanize unexpected revolution whose consequences will be very grave. The reading .... having a significant impact on the service industries. ..... secure your investment. Additional ..... Nigeria may fail.

  15. Creating Societal Benefits and Corporate Profits


    Raisch, Sebastian; Probst, Gilbert; Gomez, Peter; Zimmermann, Alexander


    The odds of launching a new business that creates value for both the company and the public can be improved with good planning. An in-depth analysis of how four companies created for-profit initiatives that also have high societal value suggests that each followed a similar step-by-step process to achieve what the researchers call synergistic value creation. Those steps include establishing cross-business incubators and installing multi-perspective monitoring systems.

  16. ISO 55000: Creating an asset management system. (United States)

    Bradley, Chris; Main, Kevin


    In the October 2014 issue of HEJ, Keith Hamer, group vice-president, Asset Management & Engineering at Sodexo, and marketing director at Asset Wisdom, Kevin Main, argued that the new ISO 55000 standards present facilities managers with an opportunity to create 'a joined-up, whole lifecycle approach' to managing and delivering value from assets. In this article, Kevin Main and Chris Bradley, who runs various asset management projects, examine the process of creating an asset management system.

  17. Creating opioid dependence in the emergency department. (United States)

    Upadhye, Suneel


    Clinical question What is the risk of creating opioid dependence from an ED opioid prescription? Article chosen Barnett ML, Olenski AR, Jena AB. Opioid-prescribing patterns of emergency physicians and risk of long-term use. N Engl J Med 2017;376:663-73, doi:10.1056/NEJMsa1610524. This study examined the risk of creating long-term opioid dependence from a prescription written in an opioid-naive patient in the ED.

  18. Creating Math Videos: Comparing Platforms and Software (United States)

    Abbasian, Reza O.; Sieben, John T.


    In this paper we present a short tutorial on creating mini-videos using two platforms--PCs and tablets such as iPads--and software packages that work with these devices. Specifically, we describe the step-by-step process of creating and editing videos using a Wacom Intuos pen-tablet plus Camtasia software on a PC platform and using the software…

  19. Innovation for creating a smart future

    Directory of Open Access Journals (Sweden)

    Sang M. Lee


    Full Text Available Today, we live in a dynamic and turbulent global community. The wave of mega-trends, including rapid change in globalization and technological advances, is creating new market forces. For any organization to survive and prosper in such an environment, innovation is imperative. However, innovation is no longer just for creating value to benefit individuals, organizations, or societies. The ultimate purpose of innovation should be much more far reaching, helping create a smart future where people can enjoy the best quality of life possible. Thus, innovation must search for intelligent solutions to tackle major social ills, seek more proactive approaches to predict the uncertain future, and pursue strategies to remove barriers to the smart future. This study explores the detailed requirements of a smart future, including both hardware types and soft social/cultural components.

  20. Can Physical Examination Create a Stener Lesion? (United States)

    Lankachandra, Manesha; Eggers, John P; Bogener, James W; Hutchison, Richard L


    The purpose of this study is to determine whether a Stener lesion can be created while testing stability of the ulnar collateral ligament (UCL) of the thumb. Testing was performed in a manner that reproduced clinical examination. Six fresh frozen hand and forearm specimens underwent sequential sectioning of the accessory UCL, the proper UCL, and the ulnar sagittal band. Measurements of radial deviation of the metacarpophalangeal (MCP) joint were taken with the thumb in neutral rotation, pronation and supination, both with 0 degrees and with 30 degrees of flexion of the MCP joint. Visual examination was performed to assess the presence of a Stener lesion. No Stener lesion was created in any position as long as the fascial origin of the ulnar sagittal band at the adductor pollicis longus remained intact. After creating a defect in the ulnar sagittal band, a Stener lesion was created in two specimens, but only when the thumb was flexed and supinated. Pronation provided more stability, and supination provided less stability, with one or both components cut, especially when testing at 30° of flexion. Compared to both components cut without flexion or rotation, there was a statistically significant difference in angulation with the 30 degrees of MCP joint flexion in both neutral rotation in supination. Performing a physical examination to assess the amount of instability of an ulnar collateral ligament injury did not create a Stener lesion if the exam was performed in a controlled, gentle manner with the thumb held without rotation. If the thumb is held in neutral rotation during the exam, an iatrogenic Stener lesion should not be created.

  1. Creating dynamic UI with Android fragments

    CERN Document Server

    Wilson, Jim


    A fast-paced tutorial that guides you through everything you need to know about dynamic UI design for Android devices.This book is for developers with a basic understanding of Android programming who would like to improve the appearance and usability of their applications. Whether you're looking to create a more interactive user experience, create more dynamically adaptive UIs, provide better support for tablets and smartphones in a single app, reduce the complexity of managing your app UIs, or you are just trying to expand your UI design philosophy, then this book is for you.

  2. Creating e-learning games with Unity

    CERN Document Server

    Horachek, David


    Unity is a fully integrated development engine providing the required functionality to create games and interactive 3D content, while reducing the time, effort, and cost of developing the content. Nowadays, many people have started to use Unity in an eLearning setting as it allows them to create real-world scenarios, or models, for training purposes. With Unity, one can develop video games that are not only fun, but are also effective teaching and learning tools. When properly designed, an engaging game is an ideal platform for the presentation, testing, and application of learning objectives.

  3. Creating a Website The Missing Manual

    CERN Document Server

    MacDonald, Matthew


    Think you need an army of skilled programmers to build a website? Think again. With nothing more than an ordinary PC, some raw ambition, and this book, you'll learn how to create and maintain a professional-looking, visitor-friendly site. This Missing Manual gives you all the tools, techniques, and expert advice you need. Plan your site. Create web pages by learning the basics of HTML and HTML5.Control page design with CSS. Format text, images, links, tables, and other elements.Attract visitors. Ensure that people can find your site through popular search engines.Build a community. Add forums

  4. Creating a web site the missing manual

    CERN Document Server

    MacDonald, Matthew


    Think you have to be a technical wizard to build a great web site? Think again. If you want to create an engaging web site, this thoroughly revised, completely updated edition of Creating a Web Site: The Missing Manual demystifies the process and provides tools, techniques, and expert guidance for developing a professional and reliable web presence. Whether you want to build a personal web site, an e-commerce site, a blog, or a web site for a specific occasion or promotion, this book gives you detailed instructions and clear-headed advice for: Everything from planning to launching. From pi

  5. Creating library tutorials for nursing students. (United States)

    Schroeder, Heidi


    This article describes one librarian's experiences with creating, promoting, and assessing online library tutorials. Tutorials were designed to provide on-demand and accessible library instruction to nursing students at Michigan State University. Topics for tutorials were chosen based on the librarian's liaison experiences and suggestions from nursing faculty. The tutorials were created using Camtasia and required the application of several tools and techniques. Tutorials were promoted through Web pages, the ANGEL course management system, blog posts, librarian interactions, e-mails, and more. In order to assess the tutorials' perceived effectiveness, feedback was gathered using a short survey. Future plans for the nursing tutorials project are also discussed.

  6. How to create a serious game?

    Directory of Open Access Journals (Sweden)

    O. Heidmann


    Full Text Available Serious games are video games designed to achieve an educational effect and achieve some degree of training in a certain area. They are nowadays used in industries such as defense, education, scientific exploration, health care, emergency management, city planning, engineering, and many others. As it still a nascent subject who doesn’t follow exactly the same rules and practices than the commercial video games industry, questions remain about how to create and use serious games. This article presents some know-how on the subject of creating serious games.

  7. Creating a Total Object of Art. (United States)

    Klie, Evelyn Busch


    Discusses a workshop that accompanied the author's exhibit, "A Sense of Place: Paintings by Evelyn Busch Klie." Explains that students created a watercolor painting and a clay frame or base with details in it. Includes a list of art materials and learning objectives. (CMK)

  8. Strategies for Creating New Venture Legitimacy (United States)

    Karlsson, Tomas; Middleton, Karen Williams


    New ventures, being heavily subjected to liabilities of newness, are seen to engage in legitimacy strategies to overcome these liabilities. Building on an adapted theoretical framework of organizational legitimacy, self-reported weekly diaries of twelve entrepreneurs were analysed to identify strategies used by new ventures to create legitimacy.…

  9. Creating by Reusing Learning Design Solutions

    NARCIS (Netherlands)

    Hernández-Leo, Davinia; Harrer, Andreas; Dodero, Juan Manuel; Asensio-Pérez, Juan; Burgos, Daniel


    Hernández-Leo, D., Harrer, A., Dodero, J. M., Asension-Pérez, J. I., & Burgos, D. (2006). Creating by reusing Learning Design solutions. Proceedings of 8th Simposo Internacional de Informática Educativa, León, Spain: IEEE Technical Committee on Learning Technology. Retrieved October 3rd, 2006, from

  10. Creating Innovative Student Projects with App Smashing (United States)

    Young, Donna


    The potential for using various apps to improve student learning is tremendous. Yet, despite the iPad's possibilities, apps are often limited in their functionality. No one has created that magical, one-size-fits-all app that accomplishes all of the tasks that you had in mind. Luckily, there is an answer to this common problem: app smashing.…

  11. How do entrepreneurs think they create value?

    DEFF Research Database (Denmark)

    Lyth Frederiksen, Dennis; Brem, Alexander


    The means with which entrepreneurs create and capture value can be difficult to get a comprehensive picture of. Looking at the tools they use can offer insights, and in this context, the book “The Lean Startup” by Eric Ries has received a tremendous amount of attention. Supposedly, many...

  12. Creating social impact with side-events

    NARCIS (Netherlands)

    Hover, Paul; Dijk, Bake; Breedveld, Koen; van Eekeren, Frank; Slender, Hans

    All over the world, sport events are seen as significant tools for creating positive social impact. This is understandable, as sport events have the power to attract enthusiastic participants, volunteers and to reach large audiences of visitors and followers via (social) media. Outbursts of

  13. Creating Spaces to Support Transgender Youth (United States)

    McGuire, Jenifer K.; Conover-Williams, Meredith


    This article explores the opportunity to create spaces within the family, school, and community that specifically promote the well-being of transgender adolescents and young adults. When social contexts are supportive, transgender youth report significantly less risk. Supportive home and school environments have been linked to better outcomes…

  14. Does the New Economy Create Higher Productivity?

    DEFF Research Database (Denmark)

    Dilling-Hansen, Mogens; Madsen, Erik Strøjer; Smith, Valdemar


    The rapid and continuous growth in the US in the 1990s and the simultaneous boom in the IT industry created the concept "The New Economy". What connects the two phenomena is that the IT industry alone is considered productive, and increased productivity in other industries, as a result of increased...

  15. The NAi effect: creating architecture culture

    NARCIS (Netherlands)

    Figueiredo, S.M.


    At a time when cultural institutions (both in the Netherlands and abroad) are adjusting to new societal and political conditions (and financial restrictions), The NAi Effect aims to elucidate the social and cultural aims of architecture museums and their impact in creating architecture culture.

  16. Creating a Sun-Safe Camp. (United States)

    Landrey, Ann


    Strategies for minimizing sun exposure of campers and staff include educating campers about the sun's effect on their skin, scheduling activities when the sun is less intense, creating shade at the camp site, incorporating sun protection into camp dress code, and training staff regarding sun protection. Addresses OSHA and liability issues. (LP)

  17. Inclusive Information Societies: Creating Growth and Employment ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Employment for youth and women. The project has two components. The first focuses on outsourcing service sector work (micro-work and rural impact sourcing) in India, Sri Lanka, and the Philippines. This sector can play a vital role in creating employment, particularly for youth and women in semi-urban and rural areas.

  18. Creating the networking enterprises - logistics determinants

    Directory of Open Access Journals (Sweden)

    Ewa Kulińska


    Full Text Available Background: The article describes the determinants of creating network enterprises with peculiar consideration of logistic factors which are conditioning the organization of processes, exchange of resources and competences. On the basis of literature analysis, there is proposed a model of creating network enterprises. A model is verified in the application part of the thesis. Methods: Within the publication a literature review of submitted scope of the interest was presented, as well as the empirical research. A research substance attaches the enterprises created on the basis of the reactivation of organizations which has collapsed due to bankruptcy proceeding. The research was based upon direct interviews with employees of the net-forming entities. Results and conclusions: Results of the research shows that taking up the cooperation and net-cooperation was the only possibility for new entities to come into existence, that were  based upon old assets and human resources liquidated during bankruptcy proceeding. There was indentified many determinants of enterprises network cooperation, however due to the research a conclusion draws, that basic factors of creating network cooperation are those which are profit-achieving oriented.


    International Nuclear Information System (INIS)

    K.G. Mon


    The purpose of this calculation is to create tables for input into RIP ver. 5.18 (Integrated Probabilistic Simulator for Environmental Systems) from WAPDEG ver. 3.06 (Waste Package Degradation) output. This calculation details the creation of the RIP input tables for TSPA-VA REV.00

  20. Leadership: creating a cuiture of caring. (United States)

    DePaola, Dominick P


    Leadership is characterized in terms of accomplishing mutual goals for the organization, its employees, and its community through vision and creating a community of caring. The examples of Herb Kelleher of Southwest Airlines, Walt Disney, and Dean Arthur A. Dugoni of the University of the Pacific are used to illustrate how this style of leadership plays out in specific accomplishments.

  1. System and method for creating expert systems (United States)

    Hughes, Peter M. (Inventor); Luczak, Edward C. (Inventor)


    A system and method provides for the creation of a highly graphical expert system without the need for programming in code. An expert system is created by initially building a data interface, defining appropriate Mission, User-Defined, Inferred, and externally-generated GenSAA (EGG) data variables whose data values will be updated and input into the expert system. Next, rules of the expert system are created by building appropriate conditions of the rules which must be satisfied and then by building appropriate actions of rules which are to be executed upon corresponding conditions being satisfied. Finally, an appropriate user interface is built which can be highly graphical in nature and which can include appropriate message display and/or modification of display characteristics of a graphical display object, to visually alert a user of the expert system of varying data values, upon conditions of a created rule being satisfied. The data interface building, rule building, and user interface building are done in an efficient manner and can be created without the need for programming in code.

  2. Practice It: Create a Weekly Activity Plan (United States)

    At the beginning of the week, create an activity plan to help you reach your goals. Start by identifying your goals for the week. Based on your goals, write down when you are going to exercise and what you are going to do.

  3. Understanding Critical Thinking to Create Better Doctors (United States)

    Zayapragassarazan, Zayabalaradjane; Menon, Vikas; Kar, Sitanshu Sekhar; Batmanabane, Gitanjali


    Medical students master an enormous body of knowledge, but lack systematic problem solving ability and effective clinical decision making. High profile reports have called for reforms in medical education to create a better generation of doctors who can cope with the system based problems they would encounter in an interdisciplinary and…

  4. Creating an Economically Enabling and Competitive Business ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Creating an Economically Enabling and Competitive Business Environment in the West Bank and Gaza Strip. The prospect of indefinite Israeli occupation of the Palestinian territories, and their extreme dependence on foreign assistance and Israeli-controlled customs revenues, had led to the conclusion that the Palestinian ...

  5. Creating an Economically Enabling and Competitive Business ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Creating an Economically Enabling and Competitive Business Environment in the West Bank and Gaza Strip. The prospect of indefinite Israeli occupation of the ... Impact of implementing the Palestinian banking law on the performance of the private sector [Arabic language]. Documents. Impact of the commercial agents law ...

  6. Creating Smart-er Cities: An Overview (United States)

    Allwinkle, Sam; Cruickshank, Peter


    The following offers an overview of what it means for cities to be "smart." It draws the supporting definitions and critical insights into smart cities from a series of papers presented at the 2009 Trans-national Conference on Creating Smart(er) Cities. What the papers all have in common is their desire to overcome the all too often…

  7. Engineering Encounters: Creating a Prosthetic Hand (United States)

    Cook, Kristin Leigh; Bush, Sarah B.; Cox, Richard


    The power of 3D printing technology has grown exponentially in just the past few years--people around the world are using 3D printers to prepare food, create tailored clothing, build cars and homes, and advance the medical field in ways that never seemed possible. In classrooms across the nation, 3D printers have become increasingly common because…

  8. Photocatalytic Solutions Create Self-Cleaning Surfaces (United States)


    A Stennis Space Center researcher investigating the effectiveness of photocatalytic materials for keeping the Center's buildings free of grime turned to a solution created by PURETi Inc. of New York City. Testing proved successful, and NASA and the company now share a Dual Use Technology partnership. PURETi's coatings keep surfaces clean and purify surrounding air, eliminating pollution, odors, and microbes.

  9. Creating Sustainable Development through Sustainability Bildung

    African Journals Online (AJOL)


    May 12, 2018 ... ... to quit their jobs, sell their house, take their children out of school ... the globe is perceived as an object that human beings can affect, damage or protect, but ... have created a fantasy in which we believe that we can distance ...

  10. Creating Teams Increases Extension Educator Productivity (United States)

    Chalker-Scott, Linda; Daniels, Catherine H.; Martini, Nicole


    The Garden Team at Washington State University is a transdisciplinary group of faculty, staff, and students with expertise in applied plant and soil sciences and an interest in Extension education. The team's primary mission is to create current, relevant, and peer-reviewed materials as Extension publications for home gardeners. The average yearly…

  11. creating social presence in large classes

    African Journals Online (AJOL)

    Social presence refers to the ability of students to project themselves as 'real people' in an online learning community. While it is difficult to create social presence in large classes, educational technologies can enhance the social dimension of online learning if educators relinquish the use of technology as an instrument of ...

  12. The Media Creates Us in Its Image (United States)

    Stivers, Richard


    Propaganda in all its forms is the culture of a mass society. The media transmits propaganda to form public opinion and recreate the human being. Reversing the Western ideal of a rational and free individual, the media creates a childish conformist ensconced in the peer group, who acts unconsciously.

  13. Creating a winning team: lessons from football. (United States)

    Simons, Sherri Lee


    There are tasks best done on an individual basis when caring for a neonate, but the ultimate outcome for infants and their families results from a team effort. Incorporating ten strategies drawn from football can help the NICU manager create and foster effective teamwork.

  14. Creating a Data Warehouse using SQL Server

    DEFF Research Database (Denmark)

    Sørensen, Jens Otto; Alnor, Karl


    In this paper we construct a Star Join Schema and show how this schema can be created using the basic tools delivered with SQL Server 7.0. Major objectives are to keep the operational database unchanged so that data loading can be done with out disturbing the business logic of the operational...

  15. Creating social impact with sport events

    NARCIS (Netherlands)

    Hover, P.; Dijk, B.; Breedveld, K.; Eekeren, F.J.A. van; Slender, H.


    All over the world, sport events are seen as significant tools for creating positive social impact. This is understandable, as sport events have the power to attract enthusiastic participants, volunteers and to reach large audiences of visitors and followers via (social) media. Outbursts of

  16. Creating the Grateful School in Four Phases (United States)

    Griffith, Owen M.


    Author and educator Owen Griffith shares how leaders can infuse small acts of gratitude to energize their schools and create a positive, thriving culture. Leaders must begin by practicing gratitude personally, then slowly introducing the practice to their faculty and eventually students. With the right attitude and creativity, the acts of…

  17. Creating the Total Quality Effective School. (United States)

    Lezotte, Lawrence W.

    This book shows how Deming's Total Quality Management (TQM) theory for organizational management can be integrated with the effective-schools literature. Part 1 compares the 14 principles of TQM with the tenets of effective-schools research. The second part develops a blueprint for creating the total quality effective school. The conceptual…

  18. Extending the "Knowledge Advantage": Creating Learning Chains (United States)

    Maqsood, Tayyab; Walker, Derek; Finegan, Andrew


    Purpose: The purpose of this paper is to develop a synergy between the approaches of knowledge management in a learning organisation and supply chain management so that learning chains can be created in order to unleash innovation and creativity by managing knowledge in supply chains. Design/methodology/approach: Through extensive literature…

  19. Creating science simulations through Computational Thinking Patterns (United States)

    Basawapatna, Ashok Ram

    Computational thinking aims to outline fundamental skills from computer science that everyone should learn. As currently defined, with help from the National Science Foundation (NSF), these skills include problem formulation, logically organizing data, automating solutions through algorithmic thinking, and representing data through abstraction. One aim of the NSF is to integrate these and other computational thinking concepts into the classroom. End-user programming tools offer a unique opportunity to accomplish this goal. An end-user programming tool that allows students with little or no prior experience the ability to create simulations based on phenomena they see in-class could be a first step towards meeting most, if not all, of the above computational thinking goals. This thesis describes the creation, implementation and initial testing of a programming tool, called the Simulation Creation Toolkit, with which users apply high-level agent interactions called Computational Thinking Patterns (CTPs) to create simulations. Employing Computational Thinking Patterns obviates lower behavior-level programming and allows users to directly create agent interactions in a simulation by making an analogy with real world phenomena they are trying to represent. Data collected from 21 sixth grade students with no prior programming experience and 45 seventh grade students with minimal programming experience indicates that this is an effective first step towards enabling students to create simulations in the classroom environment. Furthermore, an analogical reasoning study that looked at how users might apply patterns to create simulations from high- level descriptions with little guidance shows promising results. These initial results indicate that the high level strategy employed by the Simulation Creation Toolkit is a promising strategy towards incorporating Computational Thinking concepts in the classroom environment.

  20. Creating a culture for information systems success

    CERN Document Server

    Belkhamza, Zakariya


    It has been widely reported that issues related to organizational context appear frequently in discussions of information systems success. The statement that the information system did not fit the behavioral context in an organization is often part of the explanation of why particular information system encountered unanticipated resistance and never met expectation. While this context has been intensively studied, we still lack evidence on how this organizational context is affecting the success of information system from a managerial action perspective. This type of managerial involvement is often neglected to the extent that it became an essential obstacle to organizational performance. The objective of Creating a Culture for Information Systems Success is to assist CIOs and IT managers on how to use their managerial actions to create a suitable cultural environment in the organization, which leads to a successful implementation of information systems. This  book will also provide guidelines fo...

  1. Designing value-creating supply chain networks

    CERN Document Server

    Martel, Alain


    Focusing on the design of robust value-creating supply chain networks (SCN) and key strategic issues related to the number; location, capacity and mission of supply chain facilities (plants, distribution centers) – as well as the network structure required to provide flexibility and resilience in an uncertain world – this book presents an innovative methodology for SCN reengineering that can be used to significantly improve the bottom line of supply chain dependent businesses. Providing readers with the tools needed to analyze and model value creation activities, Designing Value-Creating Supply Chain Networks examines the risks faced by modern supply chains, and shows how to develop plausible future scenarios to evaluate potential SCN designs. The design methods proposed are based on a visual representation formalism that facilitates the analysis and modeling of SCN design problems, book chapters incorporate several example problems and exercises which can be solved with Excel tools (Analysis tools and So...

  2. Creating sustainable city by enhancing social capital (United States)

    Affandi, R. A.; Mursitama, T. N.


    Scholars have been discussing social capital since the last two decades. They analyzed from various perspectives such as sociology, education, political participation, strengthening democratic values and economic empowerment of the society. However, study related to the implementation that benefits directly to the society is needed. This study examines how to create a sustainable city by enhancing social capital from both macro and micro analyses. This combination of analysis offers deeper understanding both from decision makers at city level and individuals, groups and society. We will conduct qualitative approach mainly by interviews and direct observation to collect the data. also, we also analyze publicly available data. Finally, this study contributes to new understanding in creating a sustainable city, not only about the environment and physical aspects, but also about ensuring political economic, democratic values, and social welfare.

  3. Digital Media Creates Youth Voices Heard

    Directory of Open Access Journals (Sweden)

    Jeff Sallee


    Full Text Available Oklahoma 4-H clubs and military service centers partnered with the Adobe Youth Voices (AYV program to give youth opportunities to raise their voices through digital media. This program reached out to underrepresented youth and gave them the tools and technology to effectively express themselves. The intent of this project was for 4-H members to create videos to educate, help and raise awareness in their communities of topics that were important to the youth. These experiences help youth gain knowledge towards helping others solve farm, home, and community problems. Participating youth selected issues that were important to them and created a short video, educating others and sharing their convictions on the topics of horse therapy, citizenship, bullying, and distracted driving.

  4. Co-creating meaning through Artful Inquiry

    DEFF Research Database (Denmark)

    Darsø, Lotte


    The purpose of this chapter is to point out the need for aesthetic and artful methods for reflection, learning and co-creation. The context is management education focused on developing innovation competency. The data derive from action research, observations and written reports. The main contrib...... of leadership icons as well as co-creating with tangible materials can give rise to new meaning and transformational learning.......The purpose of this chapter is to point out the need for aesthetic and artful methods for reflection, learning and co-creation. The context is management education focused on developing innovation competency. The data derive from action research, observations and written reports. The main...... contribution of this chapter is the introduction of a model for Artful Inquiry, which involves constructing powerful questions and finding appropriate artistic methods for reflecting and for co-creating with people or with artistic material. It is argued that Artful Inquiry can access deeper layers of knowing...

  5. Creating interdisciplinary education within monodisciplinary structures

    DEFF Research Database (Denmark)

    Lindvig, Katrine; Lyall, Catherine; R. Meagher, Laura


    The literature on interdisciplinary higher education is influenced by two overall trends: one looks at the institutional level of specially designed interdisciplinary institutions, while the other assesses individual interdisciplinary educational activities. Much less attention is given...... to the processes of creating interdisciplinary education initiatives within traditional monodisciplinary universities. In this study, we thus explore how interdisciplinary education and teaching emerge and develop within universities that have little or no established infrastructure to support interdisciplinarity....... Using qualitative data from a multi-part case study, we examine the development of diverse interdisciplinary educational efforts within a traditional faculty-structured university in order to map the ways in which interdisciplinary educational elements have been created, supported, challenged or even...

  6. Novel device for creating continuous curvilinear capsulorhexis. (United States)

    Soylak, Mustafa


    The purpose of this paper is to develop a novel capsulorhexis system. Mechatronics Laboratory, University of Erciyes and Kayseri Maya Eye Hospital. A 3D model was created and simulations were conducted to develop a new device which was designed, fabricated and tested for continuous curvilinear capsulorhexis (CCC). The name of this system is the electro-mechanical capsulorhexis system (EMCS). The 3D model was created by using a commercial design software and a 3D printer was used to fabricate the EMCS Finite element analysis and geometrical relation tests of the EMCS for different sized lenses were performed. The results show that the EMCS is a perfect solution for capsulorhexis surgeries, without mechanical or geometrical problems. The EMCS can open the anterior lens capsule more easily and effectively than manual CCC applications and needs less experience.

  7. Can cognitive science create a cognitive economics? (United States)

    Chater, Nick


    Cognitive science can intersect with economics in at least three productive ways: by providing richer models of individual behaviour for use in economic analysis; by drawing from economic theory in order to model distributed cognition; and jointly to create more powerful 'rational' models of cognitive processes and social interaction. There is the prospect of moving from behavioural economics to a genuinely cognitive economics. Copyright © 2014. Published by Elsevier B.V.

  8. Story-dialogue: creating community through storytelling


    Doyle-Jones, Carol Sarah


    This narrative case study examines the role of storytelling in creating community with a grade 7 class. Twelve girls and eleven boys, ages 12 to 13, participated in this classroom-based study. Students engaged in three structured storytelling activities incorporating home-to-school stories, story responses, and classroom presentations. First, students’ parents/guardians told a coming-of-age or Confirmation story to their child. Second, at school, students shared their family story with a part...

  9. Strong branding creates a competitive edge. (United States)

    Wagner, Peggy


    This article encompasses the basics of branding and how it relates to radiology organizations. It also provides tools to help develop your brand. To effectively use branding as a component of your marketing strategy, it is important to follow 3 basic principles: focus on where you excel, understand the existing markets, and be consistent. You do not need to be a large hospital, imaging center, or department to create a brand identity.

  10. Creating an Asthma-Friendly School

    Centers for Disease Control (CDC) Podcasts


    This podcast features real-life success stories of students with asthma who, thanks to their schools' implementation of asthma-friendly policies and programs, now have their asthma under control.  Created: 11/8/2007 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP), Division of Adolescent and School Health (DASH).   Date Released: 5/20/2008.

  11. Creating marketing strategies for higher education institutions


    Lidia Białoń


    The article presents a thesis that the primary premise of creating marketing strategies for higher education institution is a three-dimensional notion of marketing. The first dimension lies in the theoretical notions of the essence of marketing, including the transactional marketing (1.0), relationship marketing (2.0) and spiritual marketing (3.0). The second dimension is formed by methods of marketing research and accurate notions of marketing, while the third are channels of marketing infor...

  12. Cognitive abilities and creating metaphorical names

    Directory of Open Access Journals (Sweden)

    Avanesyan, Marina O.


    Full Text Available The cognitive processing of metaphor creation has been insufficiently investigated. Creating metaphors requires the ability to work in a fantastic, impossible context, using symbolic and associative means to express oneís thoughts. It has been shown recently that intelligence plays an important role in the creation of metaphors, but it is not the main factor in determining their success. The present research explores the roles of conceptual abilities, categorical abilities, and flexibility (as the factor creativity in metaphor creation. Participants (n = 38 young adults were asked to come up with names for three photos, without any special instruction to create metaphors. To classify conceptual abilities we used ìConceptual Synthesisî (M. A. Kholodnaya, 2012; to measure categorical ability we used the subtest ìSimilaritiesî (D. Wechsler, 1955; to identify the role of creativity in the metaphor process we used the test of ìUnusual Usesî (J. P. Guilford, 1960. The creation of complex metaphorical names was associated with a tendency to create highly organized mental structures and to retain them within the general semantic context (r = 0.344, p < 0.05. The tendency to create single-level situational connections was associated with a tendency to give specific names to photos (r = 0.475, p < 0.01. Photographic images proved out to be fruitful stimuli to investigate the processing of visual information. We developed a preliminary classification of names: 1 concrete; 2 situational; 3 abstract; 4 metaphorical (M1 and M2. We identified two types of metaphorical names — perceptual and complex metaphors — that relate to conceptual abilities in different ways. It is inaccurate to speak about a general concept of ìmetaphorical abilitiesî; we should differentiate the psychological mechanisms that lie at their base.

  13. Creating load for new hydrogen production

    International Nuclear Information System (INIS)

    Smith, R.


    This presentation provides an update of the activities of the Hydrogen Village. The Hydrogen Village is a public-private partnership of approximately 40 companies with the goal of advancing awareness of the environmental, economic and social benefits of hydrogen and fuel cell technologies. The intent of the hydrogen village is to create a sustainable commercial market for these technologies within the Greater Toronto Area and to help to catalyze such markets in other areas

  14. Creating the next generation control system software

    International Nuclear Information System (INIS)

    Schultz, D.E.


    A new 1980's style support package for future accelerator control systems is proposed. It provides a way to create accelerator applications software without traditional programming. Visual Interactive Applications (VIA) is designed to meet the needs of expanded accelerator complexes in a more cost effective way than past experience with procedural languages by using technology from the personal computer and artificial intelligence communities. 4 refs

  15. Creating Life in an Urban Space


    Fredrickson, Kirsten I.


    Creating Life in an Urban Space Kirsten Fredrickson Abstract Towns contain spaces defined by human interaction with their surroundings. In any town, certain places seem inviting while others seem cold and unfriendly. This is the result of subtle design decisions that directly effect the character of a place. This investigation focuses on the interaction of architecture in our daily lives and how it affects us in ways that we often overlook. The life of a town is in its rela...

  16. CREATE-IP and CREATE-V: Data and Services Update (United States)

    Carriere, L.; Potter, G. L.; Hertz, J.; Peters, J.; Maxwell, T. P.; Strong, S.; Shute, J.; Shen, Y.; Duffy, D.


    The NASA Center for Climate Simulation (NCCS) at the Goddard Space Flight Center and the Earth System Grid Federation (ESGF) are working together to build a uniform environment for the comparative study and use of a group of reanalysis datasets of particular importance to the research community. This effort is called the Collaborative REAnalysis Technical Environment (CREATE) and it contains two components: the CREATE-Intercomparison Project (CREATE-IP) and CREATE-V. This year's efforts included generating and publishing an atmospheric reanalysis ensemble mean and spread and improving the analytics available through CREATE-V. Related activities included adding access to subsets of the reanalysis data through ArcGIS and expanding the visualization tool to GMAO forecast data. This poster will present the access mechanisms to this data and use cases including example Jupyter Notebook code. The reanalysis ensemble was generated using two methods, first using standard Python tools for regridding, extracting levels and creating the ensemble mean and spread on a virtual server in the NCCS environment. The second was using a new analytics software suite, the Earth Data Analytics Services (EDAS), coupled with a high-performance Data Analytics and Storage System (DASS) developed at the NCCS. Results were compared to validate the EDAS methodologies, and the results, including time to process, will be presented. The ensemble includes selected 6 hourly and monthly variables, regridded to 1.25 degrees, with 24 common levels used for the 3D variables. Use cases for the new data and services will be presented, including the use of EDAS for the backend analytics on CREATE-V, the use of the GMAO forecast aerosol and cloud data in CREATE-V, and the ability to connect CREATE-V data to NCCS ArcGIS services.

  17. Create a new vision for indigenous development

    Energy Technology Data Exchange (ETDEWEB)

    Chavez Alba, Rafael; Sanchez Arancibia, Oscar Armando [TRANSIERRA S.A., Santa Cruz (Bolivia)


    Transierra is a Bolivian company created in the year 2000 with the goal of transporting natural gas from the fields of San Alberto and San Antonio, in Tarija, to the Rio Grande Gas Compression Plant in Santa Cruz, for export to Brazil. Transierra has implemented a Social Action Plan, which allowed it to execute more than 800 community projects for the benefit of over 40 thousand families living in it's area of influence, with the presence of 146 indigenous communities, generally lagging behind in economic and productive life in the region and country. The Support Program to Guarani Development Plans (PA-PDG) is part of the Social Plan and is part of a long-term agreement signed between Transierra and indigenous organizations. The program has implemented more than one hundred projects for productive development, health, education, cultural revaluation, and strengthening organizational infrastructure, generating huge benefits in improving the living conditions of thousands of families of the Guarani people. This year a unique initiative was created with 4 Indigenous Captains and with the support of the International Finance Corporation (World Bank Group), including Business Plans to promote sustainable economic growth, created productive economic cycles involving improvements to the production and productivity to enter the commercial distribution of local and national markets. These four initiatives have meant a shift in the implementation and is helping to generate new dynamics in production, in addition to capturing significant resources from public and private investment, laying the groundwork for the improvement of the incomes and quality of life of its beneficiaries. (author)

  18. 10 ways to create shareholder value. (United States)

    Rappaport, Alfred


    Executives have developed tunnel vision in their pursuit of shareholder value, focusing on short-term performance at the expense of investing in long-term growth. It's time to broaden that perspective and begin shaping business strategies in light of the competitive landscape, not the shareholder list. In this article, Alfred Rappaport offers ten basic principles to help executives create lasting shareholder value. For starters, companies should not manage earnings or provide earnings guidance; those that fail to embrace this first principle of shareholder value will almost certainly be unable to follow the rest. Additionally, leaders should make strategic decisions and acquisitions and carry assets that maximize expected value, even if near-term earnings are negatively affected as a result. During times when there are no credible value-creating opportunities to invest in the business, companies should avoid using excess cash to make investments that look good on the surface but might end up destroying value, such as ill-advised, overpriced acquisitions. It would be better to return the cash to shareholders in the form of dividends and buybacks. Rappaport also offers guidelines for establishing effective pay incentives at every level of management; emphasizes that senior executives need to lay their wealth on the line just as shareholders do; and urges companies to embrace full disclosure, an antidote to short-term earnings obsession that serves to lessen investor uncertainty, which could reduce the cost of capital and increase the share price. The author notes that a few types of companies--high-tech start-ups, for example, and severely capital-constrained organizations--cannot afford to ignore market pressures for short-term performance. Most companies with a sound, well-executed business model, however, could better realize their potential for creating shareholder value by adopting the ten principles.

  19. Creating a culture of mutual respect. (United States)

    Kaplan, Kathryn; Mestel, Pamela; Feldman, David L


    The Joint Commission mandates that hospitals seeking accreditation have a process to define and address disruptive behavior. Leaders at Maimonides Medical Center, Brooklyn, New York, took the initiative to create a code of mutual respect that not only requires respectful behavior, but also encourages sensitivity and awareness to the causes of frustration that often lead to inappropriate behavior. Steps to implementing the code included selecting code advocates, setting up a system for mediating disputes, tracking and addressing operational system issues, providing training for personnel, developing a formal accountability process, and measuring the results. Copyright 2010 AORN, Inc. Published by Elsevier Inc. All rights reserved.

  20. Workshop: Creating Your Institutional Research Repository

    KAUST Repository

    Grenz, Daryl M.


    In 2002, the Scholarly Publishing and Academic Resources Coalition (SPARC) proposed the concept of an institutional repository to simultaneously disrupt and enhance the state of scholarly communications in the academic world. Thirteen years later, thousands of universities and other institutions have answered this call, but many more have not due to gaps in budgets, awareness and, most of all, practical guidance on creating an institutional repository. This workshop provides you with an essential primer on what it takes to establish a fully-functioning institutional repository. Every aspect of the process will be covered, including policies, procedures, staffing guidelines, workflows and repository technologies.

  1. Hospital culture--why create one? (United States)

    Sovie, M D


    Hospitals, to survive, must be transformed into responsive, participative organizations capable of new practices that produce improved results in both quality of care and service at reduced costs. Creating, managing, and changing the culture are critical leadership functions that will enable the hospital to succeed. Strategic planning and effective implementation of planned change will produce the desired culture. Work restructuring, a focus on quality management along with changes in clinical practices, as well as the care and support processes, are all a part of the necessary hospital cultural revolution.

  2. Creating Posters for Effective Scientific Communication. (United States)

    Bavdekar, Sandeep B; Vyas, Shruti; Anand, Varun


    A scientific poster is a summary of one's research that is presented in a visually engaging manner. Posters are presented as a means of short and quick scientific communications at conferences and scientific meetings. Presenting posters has advantages for the presenters and for conference attendees and organizers. It also plays a part in dissemination of research findings and furthering science. An effective poster is the one that focuses on a single message and conveys it through a concise and artistically attractive manner. This communication intends to provide tips on creating an effective poster to young scientists. © Journal of the Association of Physicians of India 2011.

  3. Do Treasure Islands Create Firm Value?

    DEFF Research Database (Denmark)

    Lai, Tat-kei; Ng, Travis

    They do! Otherwise, their use would not have been so prevalent among firms. How much firm value they create, however, is still an open question. Exploiting a political event in the U.K. that suddenly raised the cost of using tax havens, we find that there was a 0.87% reduction in cumulative...... abnormal return (CAR) among the sampled firms, corresponding to about £532 million in market capitalization. The firms of stronger corporate governance registered a stronger reduction in CAR. A simple linear extrapolation suggests that the firm value contributed by tax havens can be as much as £31 billion....


    Directory of Open Access Journals (Sweden)

    Dumitru-Alexandru Bodislav


    Full Text Available The research done for this article is following the elaboration of a moldable model on the actual economic context, in which there are considered continuous learning elements on facts and commercial niches, evaluating a business starting from causality diagram and structuring its processes. Analyzing the evolution of a business and on the market in which they are deploying their activity through quantitative and qualitative measurement methods focused on trends. Testing hypotheses and business suppositions that are the main engine of theory focused on planning, a model of creating a strategic management process that will be developed in this article.

  5. Green electronics manufacturing creating environmental sensible products

    CERN Document Server

    Wang, John X


    Going ""green"" is becoming a major component of the mission for electronics manufacturers worldwide. While this goal seems simplistic, it poses daunting dilemmas. Yet, to compete effectively in the global economy, manufacturers must take the initiative to drive this crucial movement. Green Electronics Manufacturing: Creating Environmental Sensible Products provides you with a complete reference to design, develop, build, and install an electronic product with special consideration for the product's environmental impacts during its whole life cycle. The author discusses how to integrate the st

  6. Creating fluid injectivity in tar sands formations (United States)

    Stegemeier, George Leo; Beer, Gary Lee; Zhang, Etuan


    Methods for treating a tar sands formation are described herein. Methods for treating a tar sands may include heating a portion of a hydrocarbon layer in the formation from one or more heaters located in the portion. The heat may be controlled to increase the permeability of at least part of the portion to create an injection zone in the portion with an average permeability sufficient to allow injection of a fluid through the injection zone. A drive fluid and/or an oxidizing fluid may be provided into the injection zone. At least some hydrocarbons are produced from the portion.

  7. Creating an anisotropic plasma resistivity with waves

    International Nuclear Information System (INIS)

    Fisch, N.J.; Boozer, A.H.


    An anisotropic plasma resistivity may be created by preferential heating of electrons traveling in one direction. This can result in a steady-state toroidal current in a tokamak even in the absence of net wave momentum. In fact, at high wave phase velocities, the current associated with the change in resistivity is greater than that associated with net momentum input. An immediate implication is that other waves, such as electron cyclotron waves, may be competitive with lower-hybrid waves as a means for generating current. An analytical expression is derived for the current generated per power dissipated which agrees remarkably well with numerical calculations

  8. Creating three-dimensional thermal maps

    CSIR Research Space (South Africa)



    Full Text Available stream_source_info Price_2011.pdf.txt stream_content_type text/plain stream_size 30895 Content-Encoding ISO-8859-1 stream_name Price_2011.pdf.txt Content-Type text/plain; charset=ISO-8859-1 Creating Three...-Dimensional Thermal Maps Mathew Price Cogency cc Cape Town Email: Jeremy Green CSIR Centre for Mining Innovation Johannesburg Email: John Dickens CSIR Centre for Mining Innovation Johannesburg Email: jdickens...

  9. ESTEEM manual. Deliverable 5 of Create Acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Jolivet, E. [IAE, Toulouse (France); Mourik, R.; Raven, R.P.J.M.; Feenstra, C.F.J. [ECN Policy Studies, Petten (Netherlands); Alcantud Torrent, A.; Schaefer, B. [EcoInstitute, Barcelona (Spain); Heiskanen, E. [National Consumer Research Centre NCRC, Helsinki (Finland); Hodson, M. [Centre for Sustainable Urban and Regional Futures SURF, Manchester (United Kingdom); Oniszk-Poplawska, A. [Institute for Renewable Energy IEO, Warszawa (Poland); Difiore, M.; Fucsko, J. [Hungarian Environmental Economics Center MAKK, Budapest (Hungary); Maack, M.H. [Icelandic New Energy INE, Reykjavik (Iceland); Poti, B.M. [CERIS-CNR, Rome (Italy); Prasad, G. [University of Cape Town UCT, Capetown (South Africa); Brohmann, B.; Fritsche, U.R.; Huenecke, K. [OEKO Institut, Freiburg (Germany)


    The ESTEEM tool is one of the outcomes of Create Acceptance. ESTEEM (Engage stake-holders through a systematic toolbox to manage new energy projects) is a six step tool which is performed by a consultant in close cooperation with the project manager of a new energy project. The focus of the tool is put on the early recognition and discussion of stakeholders expectations and the integration of these in the design of the project. ESTEEM, including background information is freely available via

  10. Nuclear power creates new possibilities for marketing

    International Nuclear Information System (INIS)

    Van Vuren, K.


    Irradiation of food presents various advantages over other forms of food sterilization and preservation: 1) food is disinfested of insects, microorganisms and parasites without harming the fooddstuff itself; 2) food is handled in its packaged form when irradiated; 3) the irradiation process is a 'cold' process, i.e. foodstuff need not undergo a rise in temperature; this prevents harming of the tissues; and 4) the storage life is increased, creating new possibilities for marketing and trade. A few experiments with vegetables, fruit and meat are described

  11. Creating and probing coherent atomic states

    Energy Technology Data Exchange (ETDEWEB)

    Reinhold, C.O.; Burgdoerfer, J. [Oak Ridge National Lab., TN (United States). Physics Div.]|[Univ. of Tennessee, Knoxville, TN (United States). Dept. of Physics and Astronomy; Frey, M.T.; Dunning, F.B. [Rice Univ., Houston, TX (United States)


    The authors present a brief review of recent experimental and theoretical time resolved studies of the evolution of atomic wavepackets. In particular, wavepackets comprising a superposition of very-high-lying Rydberg states which are created either using a short half-cycle pulse (HCP) or by rapid application of a DC field. The properties of the wavepackets are probed using a second HCP that is applied following a variable time delay and ionizes a fraction of the atoms, much like a passing-by ion in atomic collisions.

  12. Creating a culture where employee engagement Thrives

    Energy Technology Data Exchange (ETDEWEB)

    Don Groover, C.S.P. [Behavioral Science Technology, Ojai, CA (United States)


    Safety leaders across industries face a critical challenge: engaging employees. While engagement of a few people may be easy in short-term projects, it is significantly more difficult with long-term processes. In this session we show leaders how they can create a culture where workers are more open and even eager to be involved in safety efforts. Our experience with safety leaders in the nuclear industry has verified that when the factors that drive organizational functioning are understood, leaders are enabled to augment employee engagement and attain significant improvement in safety outcomes. The underlying factors that influence employee engagement, performance, outcomes, and organizational culture are the same the world over. We will also show how safety is capable, by its intrinsic value, of winning profound support and direct engagement of employees. In this session, we will examine how leaders can leverage their decisions and actions to win over employees to safety and support them in their endeavors to promote it. Using the safety leadership best practices Vision, Credibility, Accountability, Communication, Collaboration, Action Orientation, and Recognition and Feedback, leaders increase their impact on their organization in favor of a culture that supports safety and employee engagement. Leaders that create a climate and culture where employee engagement thrives, realize better safety results. Leadership is not exclusively an inborn talent; it can be developed and enhanced. To this end, we will also show the advantages of transformational leadership style by comparing it to more classical transactional leadership.

  13. Data Programming: Creating Large Training Sets, Quickly (United States)

    Ratner, Alexander; De Sa, Christopher; Wu, Sen; Selsam, Daniel; Ré, Christopher


    Large labeled training sets are the critical building blocks of supervised learning methods and are key enablers of deep learning techniques. For some applications, creating labeled training sets is the most time-consuming and expensive part of applying machine learning. We therefore propose a paradigm for the programmatic creation of training sets called data programming in which users express weak supervision strategies or domain heuristics as labeling functions, which are programs that label subsets of the data, but that are noisy and may conflict. We show that by explicitly representing this training set labeling process as a generative model, we can “denoise” the generated training set, and establish theoretically that we can recover the parameters of these generative models in a handful of settings. We then show how to modify a discriminative loss function to make it noise-aware, and demonstrate our method over a range of discriminative models including logistic regression and LSTMs. Experimentally, on the 2014 TAC-KBP Slot Filling challenge, we show that data programming would have led to a new winning score, and also show that applying data programming to an LSTM model leads to a TAC-KBP score almost 6 F1 points over a state-of-the-art LSTM baseline (and into second place in the competition). Additionally, in initial user studies we observed that data programming may be an easier way for non-experts to create machine learning models when training data is limited or unavailable. PMID:29872252

  14. Creating a culture where employee engagement Thrives

    International Nuclear Information System (INIS)

    Don Groover, C.S.P.


    Safety leaders across industries face a critical challenge: engaging employees. While engagement of a few people may be easy in short-term projects, it is significantly more difficult with long-term processes. In this session we show leaders how they can create a culture where workers are more open and even eager to be involved in safety efforts. Our experience with safety leaders in the nuclear industry has verified that when the factors that drive organizational functioning are understood, leaders are enabled to augment employee engagement and attain significant improvement in safety outcomes. The underlying factors that influence employee engagement, performance, outcomes, and organizational culture are the same the world over. We will also show how safety is capable, by its intrinsic value, of winning profound support and direct engagement of employees. In this session, we will examine how leaders can leverage their decisions and actions to win over employees to safety and support them in their endeavors to promote it. Using the safety leadership best practices Vision, Credibility, Accountability, Communication, Collaboration, Action Orientation, and Recognition and Feedback, leaders increase their impact on their organization in favor of a culture that supports safety and employee engagement. Leaders that create a climate and culture where employee engagement thrives, realize better safety results. Leadership is not exclusively an inborn talent; it can be developed and enhanced. To this end, we will also show the advantages of transformational leadership style by comparing it to more classical transactional leadership

  15. Creating a Regional Healthcare Network: People First. (United States)

    Michel-Verkerke, Margreet B


    Care organizations in the Dutch region Apeldoorn want to collaborate more in order to improve the care provision to elderly and psychiatric patients living independently. In order to support the collaboration they intend to create a regional digital healthcare network. The research was focused on the relevance of a regional healthcare network for care providers. Eleven semi-structured interviews based on the USE IT-model, were conducted with care providers and staff members. Results show that care providers need to tune their activities for this target group and create an agreement on integrated care. The relevance of a digital communication and collaboration platform is high. The regional healthcare network should support the collaboration between care providers by: 1. Offering a communication platform to replace the time consuming communication by telephone; 2. Making patient information available for patient and care provider at patients' homes; 3. Giving insight in who is giving what care to whom; and 4. Giving access to knowledge about the target group: elderly and psychiatric patients living independently.

  16. Cell adhesion pattern created by OSTE polymers. (United States)

    Liu, Wenjia; Li, Yiyang; Ding, Xianting


    Engineering surfaces with functional polymers is a crucial issue in the field of micro/nanofabrication and cell-material interface studies. For many applications of surface patterning, it does not need cells to attach on the whole surface. Herein, we introduce a novel polymer fabrication protocol of off-stoichiometry thiol-ene (OSTE) polymers to create heterogeneity on the surface by utilizing 3D printing and soft-lithography. By choosing two OSTE polymers with different functional groups, we create a pattern where only parts of the surface can facilitate cell adhesion. We also study the hydrophilic property of OSTE polymers by mixing poly(ethylene glycol) (PEG) directly with pre-polymers and plasma treatments afterwards. Moreover, we investigate the effect of functional groups' excess ratio and hydrophilic property on the cell adhesion ability of OSTE polymers. The results show that the cell adhesion ability of OSTE materials can be tuned within a wide range by the coupling effect of functional groups' excess ratio and hydrophilic property. Meanwhile, by mixing PEG with pre-polymers and undergoing oxygen plasma treatment afterward can significantly improve the hydrophilic property of OSTE polymers.

  17. Our Lunar Destiny: Creating a Lunar Economy (United States)

    Rohwer, Christopher J.


    "Our Lunar Destiny: Creating a Lunar Economy" supports a vision of people moving freely and economically between the earth and the Moon in an expansive space and lunar economy. It makes the economic case for the creation of a lunar space economy and projects the business plan that will make the venture an economic success. In addition, this paper argues that this vision can be created and sustained only by private enterprise and the legal right of private property in space and on the Moon. Finally, this paper advocates the use of lunar land grants as the key to unleashing the needed capital and the economic power of private enterprise in the creation of a 21st century lunar space economy. It is clear that the history of our United States economic system proves the value of private property rights in the creation of any new economy. It also teaches us that the successful development of new frontiers-those that provide economic opportunity for freedom-loving people-are frontiers that encourage, respect and protect the possession of private property and the fruits of labor and industry. Any new 21st century space and lunar economy should therefore be founded on this same principle.

  18. Creating Sister Cities: An Exchange Across Hemispheres (United States)

    Adams, M. T.; Cabezon, S. A.; Hardy, E.; Harrison, R. J.


    Sponsored by Associated Universities, Inc. (AUI) and the National Radio Astronomy Observatory (NRAO), this project creates a cultural and educational exchange program between communities in South and North America, linking San Pedro de Atacama in Chile and Magdalena, New Mexico in the United States. Both communities have similar demographics, are in relatively undeveloped regions of high-elevation desert, and are located near major international radio astronomy research facilities. The Atacama Large Millimeter/submillimeter Array (ALMA) is just 40 km east of San Pedro; the Very Large Array (VLA) is just 40 km west of Magdalena. In February 2007, the Mayor of San Pedro and two teachers visited Magdalena for two weeks; in July 2007 three teachers from Magdalena will visit San Pedro. These visits enable the communities to lay the foundation for a permanent, unique partnership. The teachers are sharing expertise and teaching methodologies for physics and astronomy. In addition to creating science education opportunities, this project offers students linguistic and cultural connections. The town of San Pedro, Chile, hosts nearly 100,000 tourists per year, and English language skills are highly valued by local students. Through exchanges enabled by email and distance conferencing, San Pedro and Magdalena students will improve English and Spanish language skills while teaching each other about science and their respective cultures. This poster describes the AUI/NRAO Sister Cities program, including the challenges of cross-cultural communication and the rewards of interpersonal exchanges between continents and cultures.

  19. Creating a Multi-axis Machining Postprocessor

    Directory of Open Access Journals (Sweden)

    Petr Vavruška


    Full Text Available This paper focuses on the postprocessor creation process. When using standard commercially available postprocessors it is often very difficult to modify its internal source code, and it is a very complex process, in many cases even impossible, to implement the newly-developed functions. It is therefore very important to have a method for creating a postprocessor for any CAM system, which allows CL data (Cutter Location data to be generated to a separate text file. The goal of our work is to verify the proposed method for creating a postprocessor. Postprocessor functions for multi-axis machiningare dealt with in this work. A file with CL data must be translated by the postprocessor into an NC program that has been customized for a specific production machine and its control system. The postprocessor is therefore verified by applications for machining free-form surfaces of complex parts, and by executing the NC programs that are generated on real machine tools. This is also presented here.

  20. Creating a sustainable energy future for Australia

    International Nuclear Information System (INIS)

    Sonneborn, C.L.


    A joint industry approach is needed to put in place a sustainable energy system that is economically and technologically feasible. The industry sectors involved must include the renewable energy industry, energy efficiency industry and the natural gas industry. Conventional forecasts of energy futures make far less use of these industries than is economically and technically feasible. Existing forecasts make the trade off between acceptable levels of economic growth, limitation of greenhouse gases and dependence on coal and oil appear more difficult than they actually are and overlook the benefits of sustainable energy industry development. This paper outlines how national gains from carefully targeted action can exceed national losses while substantially reducing greenhouse gases and creating jobs at zero or negative costs. (author). 3 figs., 27 refs

  1. Creating innovative programs for the future. (United States)

    Allen, Patricia E; Keough, Vicki A; Armstrong, Myrna L


    Although several major national mandates advocate for a better educated workforce, this push comes at a time when the competition for faculty, financial resources, advanced technology, and students remains strong. If nurse educators are seriously considering creating a new nurse program at their school, some key points are essential during the development stage. Using the innovation frameworks from the Institute of Healthcare Improvement, from the global design firm IDEO, and from Gladwell's The Tipping Point: How Little Things Can Make a Big Difference, this article examines the informal, formal, internal, and external work needed during program conceptualization, initial program exploration, resource infrastructure, support, and evaluation for an effective and innovative plan. Copyright 2013, SLACK Incorporated.

  2. Creating biological nanomaterials using synthetic biology

    International Nuclear Information System (INIS)

    Rice, MaryJoe K; Ruder, Warren C


    Synthetic biology is a new discipline that combines science and engineering approaches to precisely control biological networks. These signaling networks are especially important in fields such as biomedicine and biochemical engineering. Additionally, biological networks can also be critical to the production of naturally occurring biological nanomaterials, and as a result, synthetic biology holds tremendous potential in creating new materials. This review introduces the field of synthetic biology, discusses how biological systems naturally produce materials, and then presents examples and strategies for incorporating synthetic biology approaches in the development of new materials. In particular, strategies for using synthetic biology to produce both organic and inorganic nanomaterials are discussed. Ultimately, synthetic biology holds the potential to dramatically impact biological materials science with significant potential applications in medical systems. (review)

  3. Creating a false memory in the hippocampus. (United States)

    Ramirez, Steve; Liu, Xu; Lin, Pei-Ann; Suh, Junghyup; Pignatelli, Michele; Redondo, Roger L; Ryan, Tomás J; Tonegawa, Susumu


    Memories can be unreliable. We created a false memory in mice by optogenetically manipulating memory engram-bearing cells in the hippocampus. Dentate gyrus (DG) or CA1 neurons activated by exposure to a particular context were labeled with channelrhodopsin-2. These neurons were later optically reactivated during fear conditioning in a different context. The DG experimental group showed increased freezing in the original context, in which a foot shock was never delivered. The recall of this false memory was context-specific, activated similar downstream regions engaged during natural fear memory recall, and was also capable of driving an active fear response. Our data demonstrate that it is possible to generate an internally represented and behaviorally expressed fear memory via artificial means.

  4. Creating Effective Dialogue Around Climate Change (United States)

    Kiehl, J. T.


    Communicating climate change to people from diverse sectors of society has proven to be difficult in the United States. It is widely recognized that difficulties arise from a number of sources, including: basic science understanding, the psychologically affect laden content surrounding climate change, and the diversity of value systems that exist in our society. I explore ways of working with the affect that arises around climate change and describe specific methods to work with the resistance often encountered when communicating this important issue. The techniques I describe are rooted in psychology and group process and provide means for creating more effective narratives to break through the barriers to communicating climate change science. Examples are given from personal experiences in presenting climate change to diverse groups.

  5. Minkowski metrics in creating universal ranking algorithms

    Directory of Open Access Journals (Sweden)

    Andrzej Ameljańczyk


    Full Text Available The paper presents a general procedure for creating the rankings of a set of objects, while the relation of preference based on any ranking function. The analysis was possible to use the ranking functions began by showing the fundamental drawbacks of commonly used functions in the form of a weighted sum. As a special case of the ranking procedure in the space of a relation, the procedure based on the notion of an ideal element and generalized Minkowski distance from the element was proposed. This procedure, presented as universal ranking algorithm, eliminates most of the disadvantages of ranking functions in the form of a weighted sum.[b]Keywords[/b]: ranking functions, preference relation, ranking clusters, categories, ideal point, universal ranking algorithm

  6. Creating Inclusive Youth Programs for LGBTQ+ Communities

    Directory of Open Access Journals (Sweden)

    Katherine E. Soule


    Full Text Available It is vital for youth to experience inclusive programming that is welcoming. Extension has a responsibility and an obligation to provide youth with programs and spaces that are inclusive of all sexes, gender identities, gender expressions, and sexual orientations. This article provides an overview of appropriate terminology, as well as steps for creating inclusive Extension spaces and programs for youth who identify as members of lesbian, gay, bisexual, transgender, or queer/questioning (LGBTQ+ communities. With a focus on urban Extension audiences, this article uses accessible language, self-reflective prompts, and supporting visual aids to share lessons learned from ongoing inclusivity trainings with Extension personnel across the nation, as well as from research activities and inclusive programming.

  7. Challenging Unjust Authority and Creating a Profession. (United States)

    Doona, Mary Ellen


    The emergence of the trained nurse as a new profession for women coincided with the transformation of hospitals from refuges for the sick and poor into treatment facilities. The hospital was an apt setting for learning nursing's fundamentals, but the domestic demands of the setting soon took precedence over nursing education. Nursing superintendents struggled to honor the right of pupil nurses to an education over the might of the hospital's demands. The 20th anniversary of the Trained Nurse Movement in 1893 proved the decisive moment when nursing superintendents created professional associations and gathered the nursing diaspora into a coherent force. Recourse to the law followed with nurses seeking legal validation of their authority over nursing education. Now, as then, a nurse's authority is a right that has to be protected when the might of individuals and institutions, both subtle and blatant, interferes with nurses caring for the well-being of society.

  8. Creating Visual Design and Meaningful Audience Experiences

    DEFF Research Database (Denmark)

    Steijn, Arthur; Ion Wille, Jakob


    The main purpose of the EU Interreg funded Classical Composition Music and Experience Design project, was to rethink audience experiences and develop knowledge of applied technologies connected to classical music and live concerts. The project and its main objectives was motivated by at least thee...... conditions. The most important being 1) the development in new technology creating new expectations in audiences attending cultural events, including classical concerts, 2) resent decline in audiences attending classical music and 3) a will to strengthen relations between cultural institutions, creative...... businesses and educational institutions in the Øresund region (including the city and surroundings of Malmø and Copenhagen). Therefore the project Classical Composition Music and Experience Design focused on developing new and meaningful audience experiences where live classical music meets new digital...

  9. Creating marketing strategies for higher education institutions

    Directory of Open Access Journals (Sweden)

    Lidia Białoń


    Full Text Available The article presents a thesis that the primary premise of creating marketing strategies for higher education institution is a three-dimensional notion of marketing. The first dimension lies in the theoretical notions of the essence of marketing, including the transactional marketing (1.0, relationship marketing (2.0 and spiritual marketing (3.0. The second dimension is formed by methods of marketing research and accurate notions of marketing, while the third are channels of marketing information. Harmonizing these three dimensions is a precondition for effective marketing. Among other conditions for effective strategies there are: aligning goals of the chosen strategy with the mission of higher education institution, correct choice of targeted segments of the market and of marketing tools. The article also gives a sample classification of marketing strategies based on these criteria, with emphasis on the fact, that every higher education institution employs its own strategy.

  10. How to create high-performing teams. (United States)

    Lam, Samuel M


    This article is intended to discuss inspirational aspects on how to lead a high-performance team. Cogent topics discussed include how to hire staff through methods of "topgrading" with reference to Geoff Smart and "getting the right people on the bus" referencing Jim Collins' work. In addition, once the staff is hired, this article covers how to separate the "eagles from the ducks" and how to inspire one's staff by creating the right culture with suggestions for further reading by Don Miguel Ruiz (The four agreements) and John Maxwell (21 Irrefutable laws of leadership). In addition, Simon Sinek's concept of "Start with Why" is elaborated to help a leader know what the core element should be with any superior culture. Thieme Medical Publishers.

  11. Creating biological nanomaterials using synthetic biology. (United States)

    Rice, MaryJoe K; Ruder, Warren C


    Synthetic biology is a new discipline that combines science and engineering approaches to precisely control biological networks. These signaling networks are especially important in fields such as biomedicine and biochemical engineering. Additionally, biological networks can also be critical to the production of naturally occurring biological nanomaterials, and as a result, synthetic biology holds tremendous potential in creating new materials. This review introduces the field of synthetic biology, discusses how biological systems naturally produce materials, and then presents examples and strategies for incorporating synthetic biology approaches in the development of new materials. In particular, strategies for using synthetic biology to produce both organic and inorganic nanomaterials are discussed. Ultimately, synthetic biology holds the potential to dramatically impact biological materials science with significant potential applications in medical systems.

  12. Creating an interactive environment for pediatric assessment. (United States)

    de Armas Weber, D; Easley-Rosenberg, A


    An interactive assessment room (IAR) was conceived to explore the effect of a dynamic environment on the pediatric assessment process and subsequent individualized goal development. Selection of a central theme, creation of a multipurpose space, provision of multisensory experiences, maximization of environmental affordances, provision of effective motivators and opportunities for goal attainment, and facilitation of a transdisciplinary assessment were identified as integral to designing the IAR. A central farm theme was selected to create five task-oriented activity stations. The IAR offered a creative assessment environment for transdisciplinary, practice-based application of current motor development and behavioral models. In addition, the IAR facilitated exploratory play essential to promoting the client's optimal performance to arrive at the development of appropriate treatment goals.

  13. Consistency between recognition and behavior creates consciousness

    Directory of Open Access Journals (Sweden)

    Keita Inaba


    Full Text Available What is consciousness? Is it possible to create consciousness mechanically? Various studies have been performed in the fields of psychology and cerebral science to answer these questions. As of yet, however, no researchers have proposed a model capable of explaining the mind-body problem described by Descartes or replicating a consciousness as advanced as that of human beings. Ancient people believed that the consciousness resided in a Homunculus, a human in miniature who lived in the brain. It is no mystery that the ancients came up with such an idea; for consciousness has always been veiled in mystery, beyond the reach of our explorative powers. We can assert, however, that consciousness does not "live" in us, but "exists" in us. Insofar as the processes occurring inside the human brain are a product of the physical activity of the neurons that reside there, we believe that it should be possible to define consciousness systematically.

  14. Tissue loading created during spinal manipulation in comparison to loading created by passive spinal movements. (United States)

    Funabashi, Martha; Kawchuk, Gregory N; Vette, Albert H; Goldsmith, Peter; Prasad, Narasimha


    Spinal manipulative therapy (SMT) creates health benefits for some while for others, no benefit or even adverse events. Understanding these differential responses is important to optimize patient care and safety. Toward this, characterizing how loads created by SMT relate to those created by typical motions is fundamental. Using robotic testing, it is now possible to make these comparisons to determine if SMT generates unique loading scenarios. In 12 porcine cadavers, SMT and passive motions were applied to the L3/L4 segment and the resulting kinematics tracked. The L3/L4 segment was removed, mounted in a parallel robot and kinematics of SMT and passive movements replayed robotically. The resulting forces experienced by L3/L4 were collected. Overall, SMT created both significantly greater and smaller loads compared to passive motions, with SMT generating greater anterioposterior peak force (the direction of force application) compared to all passive motions. In some comparisons, SMT did not create significantly different loads in the intact specimen, but did so in specific spinal tissues. Despite methodological differences between studies, SMT forces and loading rates fell below published injury values. Future studies are warranted to understand if loading scenarios unique to SMT confer its differential therapeutic effects.

  15. Winter barley mutants created in the Ukraine

    International Nuclear Information System (INIS)

    Zayats, O.M.


    Full text: Increasing fodder and protein production is one of the objectives of the development of agriculture in Ukraine. Higher productivity of fodder crops, due to new highly productive varieties, is the means to meet this aim. Winter barley is an important crop for fodder purposes. The climate of the Ukraine is favourable for growing this crop. The areas used for the growth of winter barley are however, small (500,000-550,000 ha) and there is a shortage of good quality varieties. The main aim of the work was therefore to create new varieties of highly productive winter barley, of good quality. The new varieties and mutation lines of winter barley were created under the influence of water solutions of N-nitroso-N-methylurea (NMH - 0,012, 0,005%), N-nitroso-N-ethylurea (NEH - 0,05; 0.025; 0,012%) ethyleneimine (EI - 0,02; 0,01; 0,005%) on winter barley seeds of the varieties of local and foreign selections. On the basis of many years of investigations (1984-94) the following mutations were described: hard-grained, winter-hardiness, earliness, middle-maturity, late-maturity, wide and large leaves, narrow leaves, multinodal, great number of leaves, great number of flowers, strong stem (lodging resistant), tallness, semi-dwarfness, dwarfness, and high productivity. Particularly valuable are mutants with high productivity of green bulk. Their potential yield is 70 t/ha. As a result of the work two varieties of winter barley 'Shyrokolysty' and 'Kormovy' were released into the State register of plant varieties of the Ukraine. The other valuable mutant genotypes are used in cross breeding programmes. (author)

  16. Dancing Lights: Creating the Aurora Story (United States)

    Wood, E. L.; Cobabe-Ammann, E. A.


    Science tells a story about our world, our existence, our history, and the larger environment our planet occupies. Bearing this in mind, we created a series of lessons for 3rd-5th grades using a cross-disciplinary approach to teaching about the aurora by incorporating stories, photos, movies, and geography into the science in order to paint a broad picture and answer the question, “why do we care?” The fundamental backbone of the program is literacy. Students write and illustrate fiction and non-fiction work, poetry, and brochures that solidify both language arts skills and science content. In a time when elementary teachers relegate science to less than one hour per week, we have developed a novel science program that can be easily integrated with other topics during the typical school day to increase the amount of science taught in a school year. We are inspiring students to take an interest in the natural world with this program, a stepping-stone for larger things.

  17. When and how to create strategic alliances

    International Nuclear Information System (INIS)

    Reinsvold, C.


    As oil prices remain flat and discoveries become more costly, the relationships between suppliers and operators are changing. Arms-length, unit pricing buying practices remain the norm for many buyers, but others have identified advantages of forming alliances that make greater use of the suppliers' capabilities. Recently, operators and the service industry have started to evolve a new culture that provides value-added solutions in an incentive environment. coupled with long-term risk-sharing or partnering arrangements, the potential advantages to both the operator and supplier are clear. An alliance is a long-term commitment between the operator and one or more supplier organizations, formed to achieve well-defined project objectives in a way that is beneficial to all alliance partners. Alliances take many forms and are adapted to meet the needs of the project. Successful alliances are characterized by trust, common goals and open communication. They build on the efficiencies, capabilities and strengths each partner brings to the relationship. The nine steps to creating a successful alliance are described

  18. Creating energy citizenship through material participation. (United States)

    Ryghaug, Marianne; Skjølsvold, Tomas Moe; Heidenreich, Sara


    Transitions towards low-carbon energy systems will be comprehensive and demanding, requiring substantial public support. One important contribution from STS is to highlight the roles of citizens and public engagement. Until recently, energy users have often been treated as customers and passive market actors, or as recipients of technology at the margins of centralized systems. With respect to the latter role, critical or hesitant public action has been explained in terms of NIMBYism and knowledge deficits. This article focuses on the production of energy citizenship when considering public participation in low-carbon energy transitions. We draw upon the theory of 'material participation' to highlight how introducing and using emergent energy technologies may create new energy practices. We analyze an ongoing introduction of new material objects, highlighting the way these technologies can be seen as material interventions co-constructing temporalities of new and sustainable practices. We argue that artefacts such as the electric car, the smart meter and photovoltaic panels may become objects of participation and engagement, and that the introduction of such technologies may foster material participation and energy citizenship. The paper concludes with a discussion about the role of policies for low-carbon energy transitions on the making of energy citizenship, as well as limits of introducing a materially based energy citizenship.

  19. Creating a Masters in Numeracy Program

    Directory of Open Access Journals (Sweden)

    Eric Gaze


    Full Text Available The Master of Science in Numeracy program at Alfred University received full approval from the New York State Education Department (NYSED in May of 2007. This first-of-its-kind program seeks to provide teachers at all levels, from across the curriculum, the skills, and more importantly the confidence, to introduce relevant quantitative concepts in their own disciplines. Created to be a complement of the MS Ed. in Literacy, the 30-hour MS in Numeracy program consists of four required core courses (Teaching Numeracy, Teaching with Data, Assessment and Learning Theories in Numeracy, and Doing Science and Numeracy, five electives from a list of numeracy and literacy courses, and a Masters project. The program graduated its first student in May 2008 and three more since then. Major challenges for the program have included the uncertain (i.e., by-application connection between an MS and licensure (in contrast to the automatic professional certification for MS Ed. degrees and the small number of faculty involved in teaching the numeracy courses. The current status of the program is questionable as the person (the author who taught the first three core courses has left the University and has not yet been replaced. Even so, I believe this MS in Numeracy program offers a potentially useful example of a strategy to enhance the spread of QL through teacher preparation.

  20. Creating the optimized international marketing mix

    Directory of Open Access Journals (Sweden)

    Grubor Aleksandar


    Full Text Available In the international practice of Serbian companies still dominant approach is based on traditional foreign trade approach, which in the significant dimension ballast effective inclusion of domestic companies in the contemporary business. Such practice is a result of the modality of international trading evolved and stimulated recently including long lasting period of self managing socialism-business as well international orientation in trading was originated by the state support, which procured in the edification of so-called national corporations as a chief exporter. Long-time existing of that modality of the international trading procured in the shrinking and limitation possibilities for comprehensive development of the international orientation of domestic i.e local companies, which is an argument of objectively difficult international position of Serbian firms in the moment. Paper discuss different issues including assessment that incoming presence of regional or international investors on the domestic market will proffer possibilities for enhancement a domestic management and marketing know - how among others. So, this is a way how local management circles could make substantial progress in creating the optimized international marketing mix within domestic companies following on-going business experience.

  1. Creating cultures of excellence: Strategies and outcomes

    Directory of Open Access Journals (Sweden)

    Michael Mintrom


    Full Text Available Research findings on effective support for learning, the development of expertise, and the psychology of success suggest that the pursuit of excellence is teachable. Within the emerging field of research and practice termed “the scholarship of teaching and learning,” considerable effort has been made to document the practices of teachers who, by various measures, have been deemed excellent. In contrast, no effort has been made to codify how students can be trained to self-consciously build behaviors that generate excellent outcomes. This article reports on a multi-year effort to create cultures of excellence among cohorts of graduate students. A statistical analysis of subsequent student performance on a significant, related task indicates that explicitly promoting a culture of excellence among course participants can have a positive and sustained impact on their individual practices. Comments from subsequent student reflections further support this claim. The teaching strategies reported here could be refined, replicated, and reinvented to good effect across higher education. They are also of special relevance to those delivering professional development training to early- and mid-career professionals.

  2. Creating a Universe, a Conceptual Model

    Directory of Open Access Journals (Sweden)

    James R. Johnson


    Full Text Available Space is something. Space inherently contains laws of nature: universal rules (mathematics, space dimensions, types of forces, types of fields, and particle species, laws (relativity, quantum mechanics, thermodynamics, and electromagnetism and symmetries (Lorentz, Gauge, and symmetry breaking. We have significant knowledge about these laws of nature because all our scientific theories assume their presence. Their existence is critical for developing either a unique theory of our universe or more speculative multiverse theories. Scientists generally ignore the laws of nature because they “are what they are” and because visualizing different laws of nature challenges the imagination. This article defines a conceptual model separating space (laws of nature from the universe’s energy source (initial conditions and expansion (big bang. By considering the ramifications of changing the laws of nature, initial condition parameters, and two variables in the big bang theory, the model demonstrates that traditional fine tuning is not the whole story when creating a universe. Supporting the model, space and “nothing” are related to the laws of nature, mathematics and multiverse possibilities. Speculation on the beginning of time completes the model.

  3. Dental practice websites: creating a Web presence. (United States)

    Miller, Syrene A; Forrest, Jane L


    Web technology provides an opportunity for dentists to showcase their practice philosophy, quality of care, office setting, and staff in a creative manner. Having a Website provides a practice with innovative and cost-effective communications and marketing tools for current and potential patients who use the Internet. The main benefits of using a Website to promote one's practice are: Making office time more productive, tasks more timely, follow-up less necessary Engaging patients in an interactive and visual learning process Providing online forms and procedure examples for patients Projecting a competent and current image Tracking the usage of Web pages. Several options are available when considering the development of a Website. These options range in cost based on customization of the site and ongoing support services, such as site updates, technical assistance, and Web usage statistics. In most cases, Websites are less expensive than advertising in the phone book. Options in creating a Website include building one's own, employing a company that offers Website templates, and employing a company that offers customized sites. These development options and benefits will continue to grow as individuals access the Web and more information and sites become available.

  4. Creating conditions for cooperative learning: Basic elements

    Directory of Open Access Journals (Sweden)

    Ševkušić-Mandić Slavica G.


    Full Text Available Although a large number of research evidence speak out in favor of cooperative learning, its effectiveness in teaching does not depend only on teacher’s and students’ enthusiasm and willingness to work in such a manner. Creating cooperative situations in learning demands a serious preparation and engagement on the part of teacher who is structuring various aspects of work in the classroom. Although there exist a large number of models and techniques of cooperative learning, which vary in the way in which students work together, in the structure of learning tasks as well as in the degree to which cooperative efforts of students are coupled with competition among groups, some elements should be present in the structure of conditions irrespective of the type of group work in question. Potential effects of cooperation are not likely to emerge unless teachers apply five basic elements of cooperative structure: 1. structuring of the learning task and students’ positive interdependence, 2. individual responsibility, 3. upgrading of "face to face" interaction, 4. training of students’ social skills, and 5. evaluation of group processes. The paper discusses various strategies for establishing the mentioned elements and concrete examples for teaching practice are provided, which should be of assistance to teachers for as much successful cooperative learning application as possible in work with children.

  5. Leveraging Metadata to Create Interactive Images... Today! (United States)

    Hurt, Robert L.; Squires, G. K.; Llamas, J.; Rosenthal, C.; Brinkworth, C.; Fay, J.


    The image gallery for NASA's Spitzer Space Telescope has been newly rebuilt to fully support the Astronomy Visualization Metadata (AVM) standard to create a new user experience both on the website and in other applications. We encapsulate all the key descriptive information for a public image, including color representations and astronomical and sky coordinates and make it accessible in a user-friendly form on the website, but also embed the same metadata within the image files themselves. Thus, images downloaded from the site will carry with them all their descriptive information. Real-world benefits include display of general metadata when such images are imported into image editing software (e.g. Photoshop) or image catalog software (e.g. iPhoto). More advanced support in Microsoft's WorldWide Telescope can open a tagged image after it has been downloaded and display it in its correct sky position, allowing comparison with observations from other observatories. An increasing number of software developers are implementing AVM support in applications and an online image archive for tagged images is under development at the Spitzer Science Center. Tagging images following the AVM offers ever-increasing benefits to public-friendly imagery in all its standard forms (JPEG, TIFF, PNG). The AVM standard is one part of the Virtual Astronomy Multimedia Project (VAMP);

  6. Creating healthy work environments: a strategic perspective. (United States)

    Adamson, Bonnie J


    Although I find Graham Lowe and Ben Chan's logic model and work environment metrics thought provoking, a healthy work environment framework must be more comprehensive and consider the addition of recommended diagnostic tools, vehicles to deliver the necessary change and a sustainability strategy that allows for the tweaking and refinement of ideas. Basic structure is required to frame and initiate an effective process, while allowing creativity and enhancements to be made by organizations as they learn. I support the construction of a suggested Canadian health sector framework for measuring the health of an organization, but I feel that organizations need to have some freedom in that design and the ability to incorporate their own indicators within the established proven drivers. Reflecting on my organization's experience with large-scale transformation efforts, I find that emotional intelligence along with formal leadership development and front-line engagement in Lean process improvement activities are essential for creating healthy work environments that produce the balanced set of outcomes listed in my hospital's Balanced Scorecard.

  7. Creating Affording Situations: Coaching through Animate Objects. (United States)

    Baber, Chris; Khattab, Ahmad; Russell, Martin; Hermsdörfer, Joachim; Wing, Alan


    We explore the ways in which animate objects can be used to cue actions as part of coaching in Activities of Daily Living (ADL). In this case, changing the appearance or behavior of a physical object is intended to cue actions which are appropriate for a given context. The context is defined by the intention of the users, the state of the objects and the tasks for which these objects can be used. We present initial design prototypes and simple user trials which explore the impact of different cues on activity. It is shown that raising the handle of a jug, for example, not only cues the act of picking up the jug but also encourages use of the hand adjacent to the handle; that combinations of lights (on the objects) and auditory cues influence activity through reducing uncertainty; and that cueing can challenge pre-learned action sequences. We interpret these results in terms of the idea that the animate objects can be used to create affording situations, and discuss implications of this work to support relearning of ADL following brain damage or injury, such as might arise following a stroke.

  8. Creating Affording Situations: Coaching through Animate Objects

    Directory of Open Access Journals (Sweden)

    Chris Baber


    Full Text Available We explore the ways in which animate objects can be used to cue actions as part of coaching in Activities of Daily Living (ADL. In this case, changing the appearance or behavior of a physical object is intended to cue actions which are appropriate for a given context. The context is defined by the intention of the users, the state of the objects and the tasks for which these objects can be used. We present initial design prototypes and simple user trials which explore the impact of different cues on activity. It is shown that raising the handle of a jug, for example, not only cues the act of picking up the jug but also encourages use of the hand adjacent to the handle; that combinations of lights (on the objects and auditory cues influence activity through reducing uncertainty; and that cueing can challenge pre-learned action sequences. We interpret these results in terms of the idea that the animate objects can be used to create affording situations, and discuss implications of this work to support relearning of ADL following brain damage or injury, such as might arise following a stroke.

  9. Peculiarities of Creating Foreign Students’ Lexical Competence

    Directory of Open Access Journals (Sweden)

    Aigul Eskermesovna Sadenova


    Full Text Available Teaching of vocabulary includes several aspects of teaching content: linguistic, methodological and psychological. Teaching of vocabulary is a process which is inextricably entwined with understanding relations between new words and phonetic and grammar aspects of the language. On the one hand, simultaneous learning of two languages complicates the tasks set to the students, but, on the other hand, it simplifies the process. The complexity is in the scope of vocabulary to be remembered, as well as in the differences between grammar structures used in Russian and Kazakh. The simplification is in the fact that students are fully aware that lexical competence is formed gradually, and that every language has its lexical base required at the initial stage, and that such base is to be developed for mastering a specific language. Before identifying the methods of vocabulary semantization in the course of teaching a language to foreign students, students shall be offered active vocabulary, used to express their ideas orally and in written form, and passive vocabulary, used to perceive oral and written information. It is not possible to teach semantics only. It is necessary to create paradigmatic, syntactic and associative relations. The formation of lexical skills is connected with the solidity of vocabulary retention. In order to ensure reinforcement of the vocabulary learnt, the students shall be offered exercises contributing to the development of their skills of using vocabulary in listening, speaking, reading and writing. All above mentioned types of vocabulary semantization constitute a unified whole. Different ways of semantization are set forth for methodological purposes, to facilitate the achievement of the desired result. Translation and non-translation techniques for vocabulary presentation, as well as some tips and exercises, are given. The use of basic vocabulary at elementary and advanced levels is suggested. Certain methods for the

  10. Creating Porcine Biomedical Models Through Recombineering

    Directory of Open Access Journals (Sweden)

    Lawrence B. Schook


    Full Text Available Recent advances in genomics provide genetic information from humans and other mammals (mouse, rat, dog and primates traditionally used as models as well as new candidates (pigs and cattle. In addition, linked enabling technologies, such as transgenesis and animal cloning, provide innovative ways to design and perform experiments to dissect complex biological systems. Exploitation of genomic information overcomes the traditional need to choose naturally occurring models. Thus, investigators can utilize emerging genomic knowledge and tools to create relevant animal models. This approach is referred to as reverse genetics. In contrast to ‘forward genetics’, in which gene(s responsible for a particular phenotype are identified by positional cloning (phenotype to genotype, the ‘reverse genetics’ approach determines the function of a gene and predicts the phenotype of a cell, tissue, or organism (genotype to phenotype. The convergence of classical and reverse genetics, along with genomics, provides a working definition of a ‘genetic model’ organism (3. The recent construction of phenotypic maps defining quantitative trait loci (QTL in various domesticated species provides insights into how allelic variations contribute to phenotypic diversity. Targeted chromosomal regions are characterized by the construction of bacterial artificial chromosome (BAC contigs to isolate and characterize genes contributing towards phenotypic variation. Recombineering provides a powerful methodology to harvest genetic information responsible for phenotype. Linking recombineering with gene-targeted homologous recombination, coupled with nuclear transfer (NT technology can provide ‘clones’ of genetically modified animals.

  11. Creating a Lunar EVA Work Envelope (United States)

    Griffin, Brand N.; Howard, Robert; Rajulu, Sudhakar; Smitherman, David


    A work envelope has been defined for weightless Extravehicular Activity (EVA) based on the Space Shuttle Extravehicular Mobility Unit (EMU), but there is no equivalent for planetary operations. The weightless work envelope is essential for planning all EVA tasks because it determines the location of removable parts, making sure they are within reach and visibility of the suited crew member. In addition, using the envelope positions the structural hard points for foot restraints that allow placing both hands on the job and provides a load path for reacting forces. EVA operations are always constrained by time. Tasks are carefully planned to ensure the crew has enough breathing oxygen, cooling water, and battery power. Planning first involves computers using a virtual work envelope to model tasks, next suited crew members in a simulated environment refine the tasks. For weightless operations, this process is well developed, but planetary EVA is different and no work envelope has been defined. The primary difference between weightless and planetary work envelopes is gravity. It influences anthropometry, horizontal and vertical mobility, and reaction load paths and introduces effort into doing "overhead" work. Additionally, the use of spacesuits other than the EMU, and their impacts on range of motion, must be taken into account. This paper presents the analysis leading to a concept for a planetary EVA work envelope with emphasis on lunar operations. There is some urgency in creating this concept because NASA has begun building and testing development hardware for the lunar surface, including rovers, habitats and cargo off-loading equipment. Just as with microgravity operations, a lunar EVA work envelope is needed to guide designers in the formative stages of the program with the objective of avoiding difficult and costly rework.

  12. Creating the environment for innovation and entrepreneurship

    Directory of Open Access Journals (Sweden)

    Paul M. Lane


    Full Text Available Innovation generation and diffusion have been widely acknowledged as hinging upon the complex set of institutional, social and psychological processes. The objective of the paper is to examine the need and possibilities of creating the environment for innovation and entrepreneurship in the university setting. In particular, this paper focuses on interrelationships and roles of specific groups of university members: the administration, faculty and students. The study is exploratory in character, based on observations and literature review. It starts with defining modern-day university as home of innovation emphasizing the need for interdisciplinary and interinstitutional approaches. The paper discusses the need of faculty to learn to reach across the institution and beyond to work with others, working across silos of academia and meeting with others from very different disciplines. Second it examines ways the university administration support can encourage innovation among its faculty, staff and students. Third, it draws on existing research to identify key dimensions of change. The study proposes pathways that may activate the mechanisms of climate and infrastructure for innovation. The proposed dimensions and analyzed areas of change can potentially form the foundations of a framework for universities seeking to diagnose their existing condition and use such findings to enhance the generation and diffusion of innovation. The university quest to break down the barriers and reach across the disciplines to generate innovation takes commitment which needs to be coupled with administrative change such as the reward structures lined up with the vision and changes regarding the teaching and learning practices as well as the physical environment for the classes, the class rooms and meeting spaces of students and faculty.

  13. Employee satisfaction: creating a positive work force. (United States)

    Wright, M


    In the early 1990s, El Camino Hospital (ECH) streamlined its operations in order to remain competitive. In 1992, the hospital's District Board voted to turn the hospital's management over to a nonprofit company and it became an integrated delivery system (IDS). Hospital employees continued to suffer as their work and work schedules changed in ongoing efforts by the new administration to streamline. Finally, in early 1997, the IDS, Camino Healthcare, was dissolved. The director of radiology and radiation oncology services became aware of increasing employee problems, from high turnover rates and increased absenteeism, to morale and productivity issues. Employees also worried about job redesign, re-engineering and a lack of clear direction and expectations from department leadership. The director of the department created a task force to respond to the needs of staff members. With so much anger directed at department leadership, supervisory staff were not included in the task force. The task force worked first to identify rumors and innuendos and followed with a plan to resolve such issues. The second step was to agree to focus on issues that they could change and to let go of those they couldn't. They selected five priority issues or concerns. The group met weekly and made progress by replacing negative talk and attitudes with positive ones. Meanwhile, the director researched employee satisfaction issues so she would be prepared to discuss such issues and concerns with employees. She focused on a common theme, of having a personal mission or goal for one's self. She encouraged staff members to be aware of their own behavior when communicating with others. Although several informal surveys proved there was still much work to be done, there was positive response--a light at the end of the long tunnel.


    Directory of Open Access Journals (Sweden)

    Gauca Oana


    Full Text Available The purpose of this paper is to analyze whether civil society itself can enhance or stimulate the creation of social entrepreneurs, by studying the traits of the civil society and the various definitions attributed to it. The main question that the paper wants to answer to is Does civil society create social entrepreneurs and the main approach used in this research paper is the theoretical one. By studying existing articles and books on the topic, the paper tries to emphasize the various dimensions that civil society can embrace, as pictured by various authors, as well as how these dimensions can relate to social entrepreneurs and the emergence of social businesses. The paper is not meant to be a breakthrough in the field, but rather to launch a question that is related to very important topics these days, social entrepreneurship, social innovation, social businesses and their connection to a very much debated topic-civil society. The paper is work-in progress and wants to stimulate research regarding the search of the sources of social entrepreneurship, in order to analyze them and better establish them as incubators for the future. It wants to be of use to whoever is researching the concepts illustrated above, as well as for those who want to get in touch with the new buzz words of the academic and entrepreneurial fields. The hereby paper stands, as previously stated, in a theoretical framework and the findings represent a mere analysis of the cause-effect relationship between the characteristics of civil society and those of social entrepreneurs. However, we are of the opinion that it can be a very good starting point for the ones interested in the domain, to analyze more sources of social entrepreneurship or further refine the answer to the question addressed in this article.

  15. Creating internal culture to ensure transparency

    International Nuclear Information System (INIS)

    Hayden, E.


    Among the keys to achieving public confidence, is openness and transparency to those one serves. As a Federal regulator entrusted by the American people to protect them against the hazards of radiation, the U.S. Nuclear Regulatory Commission recognizes the need for openness and a strong 'safety culture and climate' where there is a 'safety-first focus' by its employees as well as those it regulates. For the NRC and nuclear industry, safety culture is typically the assembly of characteristics and attitudes in organisations and individuals which establishes nuclear safety as an overriding priority. Strong safety cultures include conservative decision making, strict adherence to procedures, questioning attitudes, and an environment in which employees feel free to raise safety concerns. A strong internal safety culture that is transparent to others helps the NRC to be more effective in carrying out its safety job to protect the public through its oversight of the nation's nuclear power plants and other civilian uses of nuclear energy. Creating the appropriate environment or culture and communicating NBC's contribution to safety can affect employee and ultimately public perceptions about the agency's commitment to safety in its daily activities. Where there is openness and transparency, trust and confidence are likely to follow. To assess and measure its safety culture, the NRC commissioned three independent surveys to be performed in conjunction with some use of focus groups over an 8-year period. The results identified strengths and weakness, and were compared to previous survey results as well as to other U.S. government organisations and national benchmarks. Perhaps the most surprising results came from the 2002 survey that found a third of NRC employees questioned the agency's commitment to safety, and almost half of the staff said that they did not feel it was safe to speak up in the agency. Some changes at the agency were made and the 2005 survey results showed

  16. Creating a Servitude to solve an encroachment Dispute: A Solution or creating another Problem?

    Directory of Open Access Journals (Sweden)

    Zsa-Zsa Temmers Boggenpoel


    Full Text Available The main focus of this note is the case of Roseveare v Katmer, Katmer v Roseveare 2013 ZAGPJHC 18, which provides an interesting (though possibly constitutionally problematic perspective to the encroachment problem. The decision in this case has opened the door for courts to create servitudes in instances where encroachments are left intact based on policy reasons. Concerning these policy reasons, the note investigates the reasonableness standard as it was applied in the case. It is argued that it is important to differentiate between the applications of reasonableness in encroachment cases and alleged nuisance disputes. The decision in this case creates the impression that courts may now order that a servitude be registered in favour of the encroacher against the affected landowner’s property. It seems as though the court had in mind the creation of a praedial servitude to justify the continued existence of the encroachment. The servitude is created by court order against the will of the affected landowner. At common law, the creation of a servitude in this respect does not exist, and the authority from which the power derives to make an order like this is not entirely clear. The court also does not provide any authority for the creation of the servitude in favour of the encroacher. Consequently, it is argued that this may have serious constitutional implications. For one, lack of authority for the deprivation that results may be unconstitutional because there is no law of general application that authorises the deprivation in terms of section 25(1. The creation of a servitude to explain the continued existence of the encroachment is not automatically included in the general discretion to replace removal with compensation. It is contended that an order that forces the affected landowner to register a servitude in favour of the encroacher to preserve the existing encroachment situation will be in conflict with section 25(1 as far as the common

  17. Shifting focus to create knowledge collaboratively

    Directory of Open Access Journals (Sweden)

    Hanna Voog


    the journals/editors point of view and then follow up with a more practical session on where, how and what kind of information you search in order to find relevant information about possible journals to send manuscripts to. This course design creates dynamic connections between the more classic way of academic lectures/discussions and tools that improve the PhD students' generic skills. As a result, valuable connections are being made and it is also a way of visualizing how academia works and how the culture is communicated in different ways. This includes everything from demystifying the "back-stage processes" of academia as well as finding relevant tools to navigate in a rapidly changing publication process. Both workshops and home assignments are built upon the idea of constructive alignment. The students are to focus on their respective subject field when working with the assignments, to make them matter to the individual.

  18. Difficult Sudoku Puzzles Created by Replica Exchange Monte Carlo Method


    Watanabe, Hiroshi


    An algorithm to create difficult Sudoku puzzles is proposed. An Ising spin-glass like Hamiltonian describing difficulty of puzzles is defined, and difficult puzzles are created by minimizing the energy of the Hamiltonian. We adopt the replica exchange Monte Carlo method with simultaneous temperature adjustments to search lower energy states efficiently, and we succeed in creating a puzzle which is the world hardest ever created in our definition, to our best knowledge. (Added on Mar. 11, the ...

  19. Gender differentiation in the Bible: created and recognized

    African Journals Online (AJOL)

    This paper, however, does not discuss the issue of the treament of women in ... obvious here is that God did not create another 'adam, but he created 'issha who .... According to 1:27, God created 'adam in his image.27 Here, the singular in v. ...... Theological Interpretation of Genesis 1-3 (New York: The MacMillan Company,.

  20. Creating student awareness to improve cultural competence: creating the critical incident. (United States)

    Morell, Venita W; Sharp, Penny C; Crandall, Sonia J


    Teaching medical students to recognize the need for cultural competence and accept their shortcomings in this area is a challenge. A simulated patient scenario was developed to address this challenge. The objective of the simulation is to enhance students' readiness to learn by moving them from 'unconscious incompetence' to 'conscious incompetence'. The patient scenario presents a Cherokee Indian woman with a complaint of abnormal menstrual bleeding who is resistant to gynaecologic care from male providers. A faculty member facilitates a small-group videotape review of student interviews. As students discuss their encounters, they realize they 'misdiagnose' and mishandle the interview. They are confronted by their inability to recognize cultural cues and the impact they may have on health outcomes and begin to question whether cultural beliefs are affecting the care of other patients. This simulation creates an eye-opening situation that must be handled carefully. This activity is an effective method to create awareness in students who feel they 'know all this stuff.'

  1. Creating 3D gelatin phantoms for experimental evaluation in biomedicine

    Directory of Open Access Journals (Sweden)

    Stein Nils


    Full Text Available We describe and evaluate a setup to create gelatin phantoms by robotic 3D printing. Key aspects are the large workspace, reproducibility and resolution of the created phantoms. Given its soft tissue nature, the gelatin is kept fluid during inside the system and we present parameters for additive printing of homogeneous, solid objects. The results indicate that 3D printing of gelatin can be an alternative for quickly creating larger soft tissue phantoms without the need for casting a mold.



    ENGİNOĞLU, Didem; ARIKAN, Cenk Laçin


    Current competitive environment is rapidly changing. In today’s business environment, organizations are having an increasingly difficult time in creating competitive advantages. The main reason for this is the ease in contemporary business life for organizations to reach the same or very similar resources. Firms need innovation to create and sustain success and effectiveness. In such a highly competitive business life, the importance of creating competitive advantages for organizations based ...

  3. Creating visual guidelines for a Finnish fashion brand


    Morozova, Elizaveta


    Visual communication is an essential part of branding. Visual elements like logo, brand colours, and typography create associations with a brand and make it distinctive. Graphic design is a tool for visual communication that allows creating aesthetic and functional visual elements that convey some messages. The client of this thesis is a Finnish fashion company that does not have clear and consistent visual image, and the goal is to create it based on company’s values and desired image...

  4. Creating a Curriculum for Training Health Profession Faculty Leaders

    National Research Council Canada - National Science Library

    Mitchell, Pamela H; Robins, Lynne S; Schaad, Dotiglas


    Objectives: An interprofessional, collaborative group of educators, patient safety officers, and Federal program directors teamed up to create an integrated, patient safety-centered curriculum for the education...

  5. Net-Zero Building Technologies Create Substantial Energy Savings - (United States)

    only an estimated 1% of commercial buildings are built to net-zero energy criteria. One reason for this Continuum Magazine | NREL Net-Zero Building Technologies Create Substantial Energy Savings Net -Zero Building Technologies Create Substantial Energy Savings Researchers work to package and share step

  6. Talent Management for Creating a Performance Work Environment ...

    African Journals Online (AJOL)

    This article examines the extent to which talent management can contribute towards creating a performance work environment (PWE) that can enhance sustainable talent identifi cation and development in the public service. The literature analysis results reveal that talent management is essential in creating a PWE in the ...

  7. Creating Futures through Participation and open-ended experiments

    DEFF Research Database (Denmark)

    Husted, Mia; Bladt, Mette; Tofteng, Ditte Maria Børglum

    This workshop will engage participants in a process that enables ‘ordinary people’ to take responsibility for creating new futures and to bring about new anticipations for democratic developments of local and societal issues. Founded in the Critical Utopian Action Research Tradition, the workshop...... will engage participants in a brief version of a Future Creating Workshop....

  8. 5 CFR 9701.372 - Creating initial pay ranges. (United States)


    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Creating initial pay ranges. 9701.372... HUMAN RESOURCES MANAGEMENT SYSTEM Pay and Pay Administration Transitional Provisions § 9701.372 Creating initial pay ranges. (a) DHS must, after coordination with OPM, set the initial band rate ranges for the...

  9. Creating Cartoons to Promote Leaderships Skills and Explore Leadership Qualities (United States)

    Smith, Latisha L.; Clausen, Courtney K.; Teske, Jolene K.; Ghayoorrad, Maryam; Gray, Phyllis; Al Subia, Sukainah; Atwood-Blaine, Dana; Rule, Audrey C.


    This document describes a strategy for increasing student leadership and creativity skills through the creation of cartoons. Creating cartoons engages students in divergent thinking and cognitive processes, such as perception, recall, and mental processing. When students create cartoons focused on a particular topic, they are making connections to…

  10. Fundamental Characteristics of Incentive Streams Created by Legal Systems

    NARCIS (Netherlands)

    Dari Mattiacci, G.


    The law shapes people’s behaviour by creating incentives. For example, tort law induces motorists to drive carefully by making them pay compensation for the accidents they may cause. This study analyses the way the law can create incentives in those cases in which the courts or the administrative

  11. Mandatory Parent Education Programs Can Create Positive Youth Sport Experiences (United States)

    Christofferson, Jennifer; Strand, Bradford


    Youth sport leaders must not ignore the influence parents have on creating a positive developmental experience for young athletes. Therefore, expectations involving parental involvement and conduct must be addressed prior to athletes' participation. This article aims to examine the importance of creating mandatory parental training programs for…

  12. Utilizing Educational Corporate Culture To Create a Quality School. (United States)

    Osborne, Bill

    Strategies for utilizing educational corporate culture to create a quality school are presented in this paper, which argues that the understanding of the shared belief system of organizational members is crucial to the process. Creating a quality school entails moving from a "teach the process" oriented model to one that internalizes the…

  13. Online by design the essentials of creating information literacy courses

    CERN Document Server

    Mery, Yvonne


    As online instruction becomes more popular, librarians will want to develop the knowledge and skills needed to create an effective online information literacy course. Online by Design: The Essentials of Creating Information Literacy Courses will guide librarians as they go through the process of designing, developing, and delivering online information literacy courses. Yvonne Mery & Jill Newby offer proven techniques and tips for creating quality online courses that are engaging and effective. This handbook is perfect for instruction librarians who are interesting in developing new courses or

  14. 3D game environments create professional 3D game worlds

    CERN Document Server

    Ahearn, Luke


    The ultimate resource to help you create triple-A quality art for a variety of game worlds; 3D Game Environments offers detailed tutorials on creating 3D models, applying 2D art to 3D models, and clear concise advice on issues of efficiency and optimization for a 3D game engine. Using Photoshop and 3ds Max as his primary tools, Luke Ahearn explains how to create realistic textures from photo source and uses a variety of techniques to portray dynamic and believable game worlds.From a modern city to a steamy jungle, learn about the planning and technological considerations for 3D modelin

  15. Creating a Podcast/Vodcast: A How-To Approach (United States)

    Petersen, C. C.


    Creating podcasts and vodcasts is a wonderful way to share news of science research. Public affairs officers use them to reveal the latest discoveries done by scientists in their institutions. Educators can offer podcast/vodcast creation for students who want a unique way to demonstrate their mastery of science topics. Anyone with a computer and a USB microphone can create a podcast. To do a vodcast, you also need a digital video camera and video editing software. This session focused mainly on creating a podcast - writing the script and recording the soundtrack. Attendees also did a short activity to learn to write effective narrative copy for a podcast/vodcast.

  16. Resonant fields created by spiral electric currents in Tokamaks

    International Nuclear Information System (INIS)

    Fernandes, A.S.; Caldas, I.L.


    The influence of the resonant magnetic perturbations, created by electric currents in spirals, on the plasma confinement in a tokamak with circular section and large aspect ratio is investigated. These perturbations create magnetic islands around the rational magnetic surface which has the helicity of the helicoidal currents. The intensities of these currents are calculated in order to the magnetic islands reach the limiter or others rational surfaces, what could provoke the plasma disrupture. The electric current intensities are estimated, in two spiral sets with different helicities, which create a predominantly stocastic region among the rational magnetic surfaces with these helicities. (L.C.) [pt

  17. Retreating academics: creating spaces for the scholarship of ...

    African Journals Online (AJOL)

    , this paper explores particular spaces created to support academic engagement in the scholarship of teaching and learning: the space of writing retreats. The metaphor of 'tapestry' is used to capture the development of a complex conceptual ...

  18. Creating a panorama of the heart with digital images. (United States)

    Rosebrock, L


    Digital imaging offers new opportunities still being discovered by users. This article describes a technique that was created using a digital camera to photograph the entire surface of a rat heart. The technique may have other applications as well.

  19. Creating a collage: a meaningful interactive classroom strategy. (United States)

    Seymour, R J


    How can students be helped to make personal meaning of their nursing knowledge? The author describes one strategy, that of creating a collage, that promoted interactive learning and the making of meaning.

  20. Creating Simple Admin Tools Using Info*Engine and Java (United States)

    Jones, Corey; Kapatos, Dennis; Skradski, Cory; Felkins, J. D.


    PTC has provided a simple way to dynamically interact with Windchill using Info*Engine. This presentation will describe how to create a simple Info*Engine Tasks capable of saving Windchill 10.0 administration of tedious work.

  1. DES Science Portal: II- Creating Science-Ready Catalogs

    Energy Technology Data Exchange (ETDEWEB)

    Fausti Neto, Angelo; et al.


    We present a novel approach for creating science-ready catalogs through a software infrastructure developed for the Dark Energy Survey (DES). We integrate the data products released by the DES Data Management and additional products created by the DES collaboration in an environment known as DES Science Portal. Each step involved in the creation of a science-ready catalog is recorded in a relational database and can be recovered at any time. We describe how the DES Science Portal automates the creation and characterization of lightweight catalogs for DES Year 1 Annual Release, and show its flexibility in creating multiple catalogs with different inputs and configurations. Finally, we discuss the advantages of this infrastructure for large surveys such as DES and the Large Synoptic Survey Telescope. The capability of creating science-ready catalogs efficiently and with full control of the inputs and configurations used is an important asset for supporting science analysis using data from large astronomical surveys.

  2. Creating an adaptive healing room for neurology patients

    NARCIS (Netherlands)

    Daemen, E.M.L; Behere, S.; Cuppen, R.P.G.; Facey, J.; Flinsenberg, I.C.M.; Loenen, van E.J.; Rajae-Joordens, R.J.E.


    Informed by the experiences of patients and medical staff, Philips has designed a room for neurology patients that retains a clinical feel when treatment is being carried out, but can flex to create a moretailored, personal ambiende.

  3. Future Combat Systems (FCS) Creates Cannon and Mortar Synergy

    National Research Council Canada - National Science Library

    Beard, Kirby; James, Jeff; Tolbert, Vincent J


    .... The NLOS-C is one of the eight MGVs. Program Manager FCS (Brigade Combat Team (PM FCS(BCT)) is leveraging previous and current research and development efforts to create synergy between cannons and mortars, without duplication of effort...

  4. Communicating Disparity: How Social Design can create Public ...

    African Journals Online (AJOL)


    Key words: Inequality; communication; social design; storytelling ... created unevenness, which can destroy dignity, self-confidence and esteem. .... divides, which involves gaps between groups in awareness, adoption, skills, devices, use and.

  5. Creating a Database for Test Items in National Examinations (pp ...

    African Journals Online (AJOL)

    Nekky Umera

    different programmers create files and application programs over a long period. .... In theory or essay questions, alternative methods of solving problems are explored and ... Unworthy items are those that do not focus on the central concept or.

  6. Kids Create Healthy Comics | NIH MedlinePlus the Magazine (United States)

    ... School Students Using Medline Plus Kids Create Healthy Comics Past Issues / Fall 2015 Table of Contents Fresh, ... use of reliable health information resources." The Four Comic Books Are: The Expert Investigator explores the impact ...

  7. Control of invasive plant species in created wetlands. (United States)


    The Virginia Department of Transportation (VDOT) has been using a herbicide in the form of glyphosate for the control of unwanted species in created wetlands. Results with this particular herbicide have been somewhat mixed. It was requested that the ...

  8. Creating sustainable learning environments in schools by means of ...

    African Journals Online (AJOL)

    Creating sustainable learning environments in schools by means of strategic ... be addressed by means of proper strategic planning of the education system as such ... The authors who are academics at a university and who are specializing in ...

  9. Creating photo-realistic works in a 3D scene using layers styles to create an animation (United States)

    Avramescu, A. M.


    Creating realist objects in a 3D scene is not an easy work. We have to be very careful to make the creation very detailed. If we don't know how to make these photo-realistic works, by using the techniques and a good reference photo we can create an amazing amount of detail and realism. For example, in this article there are some of these detailed methods from which we can learn the techniques necessary to make beautiful and realistic objects in a scene. More precisely, in this paper, we present how to create a 3D animated scene, mainly using the Pen Tool and Blending Options. Indeed, this work is based on teaching some simple ways of using the Layer Styles to create some great shadows, lights, textures and a realistic sense of 3 Dimension. The present work involves also showing how some interesting ways of using the illuminating and rendering options can create a realistic effect in a scene. Moreover, this article shows how to create photo realistic 3D models from a digital image. The present work proposes to present how to use Illustrator paths, texturing, basic lighting and rendering, how to apply textures and how to parent the building and objects components. We also propose to use this proposition to recreate smaller details or 3D objects from a 2D image. After a critic art stage, we are able now to present in this paper the architecture of a design method that proposes to create an animation. The aim is to create a conceptual and methodological tutorial to address this issue both scientifically and in practice. This objective also includes proposing, on strong scientific basis, a model that gives the possibility of a better understanding of the techniques necessary to create a realistic animation.

  10. Creating Practitioners of Design for Quality through Education

    DEFF Research Database (Denmark)

    Robotham, Antony John


    The above paper described my experiences of teaching engineering students to be able to create products of the highest design quality. The paper identifies the need to have a good understanding of the needs of the customer and to be able to create products, which have a range of quality attributes...... would be of higher quality and provide greater customer satisfaction if designers were continually aware of all life-phase needs....

  11. Use FOMO to Create Urgency in the Booking Process



    Create a sense of urgency and “fear of missing out” (FOMO) to nudge people to book faster. People feel more compelled to buy if they believe they are about to miss out on a limited-time offer or a good deal. This type of urgency is about creating “scarcity value,” a concept that OTAs have mastered and implemented systematically on their OTA websites to stimulate purchase behavior.

  12. Management challenges in creating value from business analytics


    Vidgen, Richard; Shaw, S.; Grant, D.G.


    The popularity of big data and business analytics has increased tremendously in the last decade and a key challenge for organizations is in understanding how to leverage them to create business value. However, while the literature acknowledges the importance of these topics little work has addressed them from the organization’s point of view. This paper investigates the challenges faced by organizational managers seeking to become more data and information-driven in order to create value. Emp...

  13. Soft Systems Methodology Embedded in Organizational Knowledge-Creating Process


    Yoshida, Taketoshi


    We clarify the role of tacit knowing in the soft systems methodology. For the purpose we investigate the basic structure of its seven-stage model, while embedding the soft systems methodology in organizational knowledge-creating process. This leads to the introduction of concept creation to the methodology. This changes the basic shape of the soft systems methodology from learning cycle to organizational knowledge-creating spiral where concept creation is the key point.

  14. Creating Intangible Value through a Corporate Employee Portal


    David Mendes; Jorge Gomes; Mário Romao


    Organizations create competitive advantage by creating more economic value than their rivals. Increasing business competition and information technology development have both led to huge corporate organizational changes and have raised the importance of intangible assets along the value chain. Value creation and the success of organizations increasingly depends on the leverage of knowledge available internally, as nowadays it has become essential to understand employee portals’ business value...

  15. Creating Virtual Exhibitions for Educational and Cultural Development

    Directory of Open Access Journals (Sweden)

    Gabriela DUMITRESCU


    Full Text Available The paper presents different tools and mechanisms to implement a virtual exhibition in different cultural areas, such as museums and libraries. Quality characteristics of virtual exhibitions are identified and described. The possibility to create native mobile applications for virtual exhibitions presentation is analyzed. The functional flow of creating a virtual exhibition is presented and discussed. The Seals - History Treasure exhibition is presented and significant historical documents are revealed.

  16. Legal and Organizational Issues in Collaborative User-Created Content


    Sarvas, Risto


    Introduction In this paper we look into issues that arise when people collaboratively create digital content and want to publicly distribute it. We identify and analyze the issues based on four case studies on amateur content production. In our analysis we discuss the issues both from the amateurs’ point of view, and also, from the game brand owners’ perspective. User-created content (UCC) in games has become popular as demonstrated by game-related skins, mods and extensions, screenshots, gam...

  17. Creating value through CSR across company functions and NGO collaborations

    DEFF Research Database (Denmark)

    Lodsgård, Lise; Aagaard, Annabeth


    -NGO partnerships in the creation of sustainable innovation. The purpose of this study is to set up a model for defining these business-NGO partnerships and to investigate through a multiple cross-sectoral case-study how the different partnership types are managed to create strategic value through sustainable...... innovation. The findings reveal different practices, opportunities and challenges in creating sustainable innovation within the different types of business-NGO partnerships....

  18. Development of soil properties and nitrogen cycling in created wetlands (United States)

    Wolf, K.L.; Ahn, C.; Noe, G.B.


    Mitigation wetlands are expected to compensate for the loss of structure and function of natural wetlands within 5–10 years of creation; however, the age-based trajectory of development in wetlands is unclear. This study investigates the development of coupled structural (soil properties) and functional (nitrogen cycling) attributes of created non-tidal freshwater wetlands of varying ages and natural reference wetlands to determine if created wetlands attain the water quality ecosystem service of nitrogen (N) cycling over time. Soil condition component and its constituents, gravimetric soil moisture, total organic carbon, and total N, generally increased and bulk density decreased with age of the created wetland. Nitrogen flux rates demonstrated age-related patterns, with younger created wetlands having lower rates of ammonification, nitrification, nitrogen mineralization, and denitrification potential than older created wetlands and natural reference wetlands. Results show a clear age-related trajectory in coupled soil condition and N cycle development, which is essential for water quality improvement. These findings can be used to enhance N processing in created wetlands and inform the regulatory evaluation of mitigation wetlands by identifying structural indicators of N processing performance.

  19. Modified Tumescent Solution for Creating Working Space During Endoscopic Thyroidectomy. (United States)

    Zhang, Li-Yong; Zhao, Wen-Xin; Wang, Bo; Yan, Shou-Yi; Wen, Jia


    To study the feasibility of gas-liquid mixing tumescent solution for creating a working space (WS) in endoscopic thyroidectomy (ET). A prospective study was performed on 186 patients with thyroid tumor who had undergone ET via chest and breast approach. Patients were randomly divided into 2 groups to receive traditional tumescent solution as group A and modified tumescent solution (gas-liquid mixing tumescent solution) as group B. This study compares the following surgical outcome parameters between the 2 groups, including changes of blood pressure, heart rate, and oxygen saturation before and after creating a WS, time for creating a WS, operative time, hemorrhage volume for creating a WS, overall hemorrhage volume, overall postoperative drainage volume, postoperative pain score, postoperative hospitalization, number of retrieved lymph nodes, total serum calcium, serum parathyroid hormone, and cases of transient and permanent recurrent laryngeal nerve palsy. No postoperative bleeding, permanent recurrent laryngeal nerve palsy, incision and surgical site infection, air embolism, flap injury occurred in both groups. The mean time for creating a WS and the whole operation in group B was significantly shorter than that in group A ( P .05). The clinical application of gas-liquid mixing tumescent solution can effectively reduce the time for creating a WS and whole operative time, and worthy of being widely used in ET as a safe and effective technique.

  20. Systematic Analysis of Splice-Site-Creating Mutations in Cancer

    Directory of Open Access Journals (Sweden)

    Reyka G. Jayasinghe


    Full Text Available Summary: For the past decade, cancer genomic studies have focused on mutations leading to splice-site disruption, overlooking those having splice-creating potential. Here, we applied a bioinformatic tool, MiSplice, for the large-scale discovery of splice-site-creating mutations (SCMs across 8,656 TCGA tumors. We report 1,964 originally mis-annotated mutations having clear evidence of creating alternative splice junctions. TP53 and GATA3 have 26 and 18 SCMs, respectively, and ATRX has 5 from lower-grade gliomas. Mutations in 11 genes, including PARP1, BRCA1, and BAP1, were experimentally validated for splice-site-creating function. Notably, we found that neoantigens induced by SCMs are likely several folds more immunogenic compared to missense mutations, exemplified by the recurrent GATA3 SCM. Further, high expression of PD-1 and PD-L1 was observed in tumors with SCMs, suggesting candidates for immune blockade therapy. Our work highlights the importance of integrating DNA and RNA data for understanding the functional and the clinical implications of mutations in human diseases. : Jayasinghe et al. identify nearly 2,000 splice-site-creating mutations (SCMs from over 8,000 tumor samples across 33 cancer types. They provide a more accurate interpretation of previously mis-annotated mutations, highlighting the importance of integrating data types to understand the functional and the clinical implications of splicing mutations in human disease. Keywords: splicing, RNA, mutations of clinical relevance

  1. IBES: A Tool for Creating Instructions Based on Event Segmentation

    Directory of Open Access Journals (Sweden)

    Katharina eMura


    Full Text Available Receiving informative, well-structured, and well-designed instructions supports performance and memory in assembly tasks. We describe IBES, a tool with which users can quickly and easily create multimedia, step-by-step instructions by segmenting a video of a task into segments. In a validation study we demonstrate that the step-by-step structure of the visual instructions created by the tool corresponds to the natural event boundaries, which are assessed by event segmentation and are known to play an important role in memory processes. In one part of the study, twenty participants created instructions based on videos of two different scenarios by using the proposed tool. In the other part of the study, ten and twelve participants respectively segmented videos of the same scenarios yielding event boundaries for coarse and fine events. We found that the visual steps chosen by the participants for creating the instruction manual had corresponding events in the event segmentation. The number of instructional steps was a compromise between the number of fine and coarse events. Our interpretation of results is that the tool picks up on natural human event perception processes of segmenting an ongoing activity into events and enables the convenient transfer into meaningful multimedia instructions for assembly tasks. We discuss the practical application of IBES, for example, creating manuals for differing expertise levels, and give suggestions for research on user-oriented instructional design based on this tool.

  2. IBES: a tool for creating instructions based on event segmentation. (United States)

    Mura, Katharina; Petersen, Nils; Huff, Markus; Ghose, Tandra


    Receiving informative, well-structured, and well-designed instructions supports performance and memory in assembly tasks. We describe IBES, a tool with which users can quickly and easily create multimedia, step-by-step instructions by segmenting a video of a task into segments. In a validation study we demonstrate that the step-by-step structure of the visual instructions created by the tool corresponds to the natural event boundaries, which are assessed by event segmentation and are known to play an important role in memory processes. In one part of the study, 20 participants created instructions based on videos of two different scenarios by using the proposed tool. In the other part of the study, 10 and 12 participants respectively segmented videos of the same scenarios yielding event boundaries for coarse and fine events. We found that the visual steps chosen by the participants for creating the instruction manual had corresponding events in the event segmentation. The number of instructional steps was a compromise between the number of fine and coarse events. Our interpretation of results is that the tool picks up on natural human event perception processes of segmenting an ongoing activity into events and enables the convenient transfer into meaningful multimedia instructions for assembly tasks. We discuss the practical application of IBES, for example, creating manuals for differing expertise levels, and give suggestions for research on user-oriented instructional design based on this tool.

  3. Method and Apparatus for Creating a Topography at a Surface (United States)

    Adams, David P.; Sinclair, Michael B.; Mayer, Thomas M.; Vasile, Michael J.; Sweatt, William C.


    Methods and apparatus whereby an optical interferometer is utilized to monitor and provide feedback control to an integrated energetic particle column, to create desired topographies, including the depth, shape and/or roughness of features, at a surface of a specimen. Energetic particle columns can direct energetic species including, ions, photons and/or neutral particles to a surface to create features having in-plane dimensions on the order of 1 micron, and a height or depth on the order of 1 nanometer. Energetic processes can include subtractive processes such as sputtering, ablation, focused ion beam milling and, additive processes, such as energetic beam induced chemical vapor deposition. The integration of interferometric methods with processing by energetic species offers the ability to create desired topographies at surfaces, including planar and curved shapes.

  4. Creating healthy work in small enterprises - from understanding to action

    DEFF Research Database (Denmark)

    Stephen, Legg; Ian S., laird; Olsen, Kirsten Bendix


    Although much is known about small and medium enterprises (SMEs), our current knowledge and understanding of occupational health and safety (OHS) and the work environment in SMEs is limited. Far less is known about how SMEs put our knowledge of OSH into action. In short, how do we create healthy...... work and healthy lives as well as ‘healthy business' in SMEs? The present paper, which also acts as an editorial for this special issue, addresses these questions by providing a summary of current knowledge - our understanding - about how to create healthy work and healthy lives for workers and owner......-managers in SMEs whilst concurrently also aiming to create a healthy business (in terms of profitability and sustainability). This paper and the special issue also emphasise the need to convert this knowledge into action - ‘from understanding to action'....

  5. Creating safety by strengthening clinicians' capacity for reflexivity (United States)


    This commentary explores the nature of creating safety in the here-and-now. Creating safety encompasses two dimensions: revisiting specific behaviours by focusing on substandard performance (reflection), and a more broad-ranging attention to everyday behaviours that are taken as given (reflexivity). The piece pays particular attention to this second dimension of creating safety. Two techniques that promote reflexivity are discussed: video-filming real-time, everyday clinical practice and inviting clinicians' feedback about their own footage, and reflecting on the knowledge and questions that patients and families have about their care, and about unexpected outcomes and clinical incidents. The piece concludes that feedback about everyday practice using these methods is critical to enhancing the safety of everyday activity. PMID:21450780

  6. Creating Value through Virtual Teams: A Current Literature Review

    Directory of Open Access Journals (Sweden)

    Akemi Takeoka Chatfield


    Full Text Available Globally, virtual teams (VT as ICT-enabled emergent network organisation forms have gained international validity by innovative organisations, with a corresponding surge of interest in understanding how organisations can leverage VT to create business value. Despite growing deliberations in VT literature on managing VT, tasks and outcomes, however, creating business value through VT remains an unresolved theoretical and pragmatic conundrum. A review of prior relevant literature is essential to advancing knowledge. The paucity of published review articles seems to have impeded the field’s accumulation of VT knowledge. This research, therefore, reviews the current literature on case studies of VT to address the question: What are organisational challenges in creating business value through VT in the organisation? The key challenges found in the literature are effective communication, knowledge sharing, trust, and interpersonal skills in the new virtual boundary-less environment. Drawing on the IT business value model, we also discuss their resource-based implications.

  7. Creating the future with all finance and financial conglomerates

    CERN Document Server

    Berghe, Lutgart


    Creating the Future with All Finance and Financial Conglomerates comprises an academic search for an understanding of all finance and financial conglomerates. It presents a strategic and economic analysis of diversification strategies and the growing interface between different types of financial firms. On the basis of a solid analysis of theoretical foundations and practical value, the book develops basic concepts of creating the future: especially solutions in managing risks and fresh ideas for the development of integrated financial services. The structure of the book is logical: starting on theoretical foundations (section 1, part A) and examining the economic value of All Finance and Financial Conglomerates (part B), leads to creating a concept for the future (part C). Case studies add additional practical value to this research. The review of the subject is completed by aspects of risk management in this sector and by political guidelines for the EU single market (section 2). The book builds further on ...


    Directory of Open Access Journals (Sweden)

    A. İ. Durmaz


    Full Text Available DEM (Digital Elevation Models is the best way to interpret topography on the ground. In recent years, lidar technology allows to create more accurate elevation models. However, the problem is this technology is not common all over the world. Also if Lidar data are not provided by government agencies freely, people have to pay lots of money to reach these point clouds. In this article, we will discuss how we can create digital elevation model from less accurate mobile devices’ GPS data. Moreover, we will evaluate these data on the same mobile device which we collected data to reduce cost of this modeling.

  9. Combine To Create Size or Growing From Small To Big?


    Gan, Thian Han


    Many companies seek to acquire or merge to grow. Size has always been the underlying rationale for mergers and acquisitions (“M&A”) as the creation of larger entities will purportedly increase the capacity of the entities hence allowing them to take advantage of economies of scale and scope. Another reason for M&A is to create a “portfolio of core competences” by combining and exploiting the core competences of the two entities to create synergy and to enhance the competitive edge for the enl...

  10. Blender production creating short animations from start to finish

    CERN Document Server

    Hess, Roland


    Blender has become one of the most popular 3D animation tools on the market because it is robust and absolutely free. Blender Production is the definitive resource for anyone who wants to create short animations from scratch. With this book, and Blender, you have the ideal platform to make it happen.  Blender expert and author Roland Hess walks you through the entire process of creating a short animation including: writing, storyboarding, blocking, character creation, animation, rendering, and production. The associated web site includes the full Blender software kit and a compl

  11. Twelve tips for creating an academic teaching portfolio. (United States)

    Little-Wienert, Kim; Mazziotti, Mark


    An academic teaching portfolio is not only a requirement at many academic teaching institutions, but it is also important in a medical educator's growth and development through documentation, reflection, evaluation, and change. Creating an academic portfolio may appear daunting at first but with careful advanced preparation, organized evidence collection of your educational work, proof of scholarship, and thorough documentation of self-reflection and change, you can produce a successful product that accurately represents your educational beliefs, accomplishments, and growth throughout your career. This article provides medical educators with twelve steps for creating a successful academic teaching portfolio.

  12. Creating perturbations from a decaying field during inflation

    DEFF Research Database (Denmark)

    Mazumdar, A.; Wang, L.


    Typically, the fluctuations generated from a decaying field during inflation do not contribute to the large scale structures. In this paper, we provide an example where it is possible for a field which slowly rolls and then decays during inflation to create all the matter perturbations with a sli......Typically, the fluctuations generated from a decaying field during inflation do not contribute to the large scale structures. In this paper, we provide an example where it is possible for a field which slowly rolls and then decays during inflation to create all the matter perturbations...

  13. Creating symmetry the artful mathematics of wallpaper patterns

    CERN Document Server

    Farris, Frank A


    This lavishly illustrated book provides a hands-on, step-by-step introduction to the intriguing mathematics of symmetry. Instead of breaking up patterns into blocks-a sort of potato-stamp method-Frank Farris offers a completely new waveform approach that enables you to create an endless variety of rosettes, friezes, and wallpaper patterns: dazzling art images where the beauty of nature meets the precision of mathematics. Featuring more than 100 stunning color illustrations and requiring only a modest background in math, Creating Symmetry begins by addressing the enigma of a simple curve, who

  14. Picture models for 2-scene comics creating system

    Directory of Open Access Journals (Sweden)

    Miki UENO


    Full Text Available Recently, computer understanding pictures and stories becomes one of the most important research topics in computer science. However, there are few researches about human like understanding by computers because pictures have not certain format and contain more lyric aspect than that of natural laguage. For picture understanding, a comic is the suitable target because it is consisted by clear and simple plot of stories and separated scenes.In this paper, we propose 2 different types of picture models for 2-scene comics creating system. We also show the method of the application of 2-scene comics creating system by means of proposed picture model.

  15. Creating Ribo-T: (Design, Build, Test)n. (United States)

    Carlson, Erik D


    Engineering biology is especially challenging given our relatively poor ability to rationally design within life's complex design landscape. Thus, moving through the engineering "design, build, test" cycle multiple times accumulates system knowledge and hopefully yields a successful design. Here I discuss the engineering process behind our recently published work creating a ribosome with tethered subunits, Ribo-T.

  16. Recommendations from the Field: Creating an LGBTQ Learning Community (United States)

    Jaekel, Kathryn S.


    This article details the creation of a lesbian, gay, bisexual, transgender, and queer (LGBTQ) learning community. Created because of research that indicates chilly campus climates (Rankin, 2005), as well as particular needs of LGBTQ students in the classroom, this learning community focused upon LGBTQ topics in and out of the classroom. While…

  17. The Ties that Bind: Creating Great Customer Service. (United States)

    Lisker, Peter


    Offers suggestions for libraries on how to develop a customer service plan to provide excellent service, create a positive environment for staff members, foster new and continued positive relationships with patrons, and evaluate customer service goals and objectives. Also discusses policies and building appearance. (Author/LRW)

  18. Creating a Winning Game Plan. The Secondary Teacher's Playbook. (United States)

    Gose, Michael D.

    This book offers strategies for high school teachers that provide tools for creating, repairing, and tweaking all the discernible components of teaching. The book is organized to move from context to teaching to discipline to thriving in teaching. The book includes tips on how to minimize discipline problems with effective curriculum and sound…

  19. Panel Discussion: Creating a Spirit of Inquiry in the Classroom (United States)

    Leh, Sandra Kundrik; Melincavage, Sharon M.


    A paucity of published literature exists related to the use of panel discussion as a teaching strategy. This article describes the panel discussion, the underpinnings of constructivism and the use of panel discussion to create a constructivist classroom environment. Details of planning, evaluating, and challenges of a panel discussion are also…

  20. Learning through Creating Robotic Models of Biological Systems (United States)

    Cuperman, Dan; Verner, Igor M.


    This paper considers an approach to studying issues in technology and science, which integrates design and inquiry activities towards creating and exploring technological models of scientific phenomena. We implemented this approach in a context where the learner inquires into a biological phenomenon and develops its representation in the form of a…

  1. Creating a Model for Graduate Student Inclusion and Success (United States)

    Duranczyk, Irene M.; Franko, Jennifer; Osifuye, Shade'; Barton, Amy; Higbee, Jeanne L.


    Mentoring and advising are critical aspects of the graduate student experience, and can have a significant impact on the professional lives of future postsecondary faculty and staff and a rippling effect throughout higher education and the global economy. This paper describes the process a new department undertook to create a graduate program that…

  2. Teaching Statistics: Creating an Intersection for Intra and Interdisciplinarity (United States)

    Savard, Annie; Manuel, Dominic


    Statistics is taught in mathematics courses in all school levels. We suggest that using rich tasks in statistics can develop statistical reasoning and create both intra and interdisciplinary links in students. In this paper, we present three case studies where middle school mathematics teachers used different tasks in lessons on pie charts. We…

  3. Identifying the challenges of creating an optimal dissemination ...

    African Journals Online (AJOL)

    It is crucial that census data is disseminated in such a way that it satisfies most user needs as far as possible, to ensure that there is optimum use of the information and that maximum value for money is provided. In the past, Statistics South Africa disseminated data at the same geographic level created for data collection.

  4. Creating a streaming video collection for your library

    CERN Document Server

    Duncan, Cheryl J


    Creating a Streaming Video Collection for Your Library covers the main processes associated with streaming video, from licensing to access and evaluation, and will serve as a key reference and source of best practices for libraries adding streaming video titles to their collections.

  5. Creating a Total Quality Environment (TQE) for Learning (United States)

    Freed, Jann E.


    This article describes a model for creating a total quality environment (TQE) for learning in which everyone is considered a learner. The model consists of 11 interrelated characteristics derived from the literature in the areas of continuous improvement, leadership, learning, learning organizations, and spirituality. The characteristics in the…

  6. Creating Complex Repository Collections, Such as Journals, with Manakin (United States)

    Koenig, Jack; Mikeal, Adam


    Purpose: The purpose of this paper is to report on a devised method of collection organisation within a DSpace repository using a Manakin theme and descriptive metadata. Design/methodology/approach: Using a Manakin theme, a user interface for a repository collection containing the contents of a serial was created to divide the collection into…

  7. Inclusive Teaching Circles: Mechanisms for Creating Welcoming Classrooms (United States)

    Moore, Sharon; Wallace, Sherri L.; Schack, Gina; Thomas, M. Shelley; Lewis, Linda; Wilson, Linda; Miller, Shawnise; D'Antoni, Joan


    This essay examines the Inclusive Teaching Circle (ITC) as a mechanism for faculty development in creating instructional tools that embrace an inclusive pedagogy reflecting diversity, cultural competence and social justice. We describe one group's year-long participation in an ITC at a large, metropolitan research university in the south. Next, we…

  8. Creating an Excellence Oriented Post-merged Organisational ...

    African Journals Online (AJOL)

    This article specifically focuses on the importance of a structured approach to the implementation of employee engagement strategies in creating a post-merged organisational culture of excellent work performance. Theoretical insights from existing literature illustrate how a structured approach to the implementation of ...

  9. Businesses Partner with Schools, Community to Create Alternative Career Pathways (United States)

    Overman, Stephenie


    Business, education and community leaders are working together to create alternative career pathways for young people who are not profiting from the four-year college track. The new Pathways to Prosperity Network brings together the Pathways to Prosperity Project at Harvard Graduate School of Education (HGSE), Jobs for the Future (JFF) and six…

  10. Creating high energy density in nuclei with energetic antiparticles

    International Nuclear Information System (INIS)

    Gibbs, W.R.


    The possibility of creating a phase change in nuclear matter using energetic antiprotons and antideuterons is examined. It is found that energy densities of the order of 2 GeV/c can be obtained for periods of approx.2 fm/c with the proper experimental selection of events. 10 refs., 7 figs

  11. Higher Education Technology and Research: Creating Excellence through State Investments (United States)

    New Jersey Commission on Higher Education, 2004


    Colleges and universities in New Jersey play a critical role in building and sustaining economic prosperity and quality of life in the state and beyond. Through advancements in technology and research, higher education helps to create new jobs, improve the workforce, develop new knowledge, and boost the overall economy. This report summarizes…

  12. Sing, Play, and Create: All in 20 Minutes! (United States)

    Mason, Emily


    Young teachers often struggle with pacing and the ability to cover more than one or two songs and activities in a single 30-minute general music class. Included in this article are lesson activities that show it is not only possible to include many of the National Standards in a single lesson, but also possible to sing, play, and create in every…

  13. Creating a Ninth-Grade Community of Care (United States)

    Ellerbrock, Cheryl R.; Kiefer, Sarah M.


    This qualitative case study analyzed how one large high school created a community of care for ninth-grade students. Data were collected during the 2006-2007 school year, including observations, individual interviews, and focus group interviews of 1 female teacher and 9 of her students. Findings suggest the Freshman Focus teachers and program…

  14. Reflections from the Field: Creating an Elementary Living Learning Makerspace (United States)

    Shively, Kathryn L.


    This article features the creation of a makerspace in the elementary education (ELED) living and learning community (LLC) residence hall. This space was created based on the growing body of literature demonstrating the rise of makerspaces across learning environments as well as the need to expose pre-service teachers (PSTs) to early field…

  15. Creating Value Through the Freemium Business Model: A Consumer Perspective

    NARCIS (Netherlands)

    G.J. Rietveld (Joost)


    textabstractThis paper develops a consumer-centric framework for creating value through the freemium business model. Goods that are commercialized through the freemium business model offer basic functionality for free and monetize users for extended use or complementary features. Compared to premium

  16. Value-Creating Networks: Organizational Issues and Challenges (United States)

    Allee, Verna


    Purpose: The purpose of this paper is to provide examples of evaluating value-creating networks and to address the organizational issues and challenges of a network orientation. Design/methodology/approach: Value network analysis was first developed in 1993 and was adapted in 1997 for intangible asset management. It has been applied from shopfloor…

  17. Creating Fiscal Space for Social Sectors Development in Tanzania ...

    African Journals Online (AJOL)

    This paper discusses fiscal space creation and use in the context of development of social sectors in Tanzania. The paper observes that Tanzania is making good progress in creating and using her fiscal space. The priority being accorded to social sectors, especially in education and health is in the right direction. However ...

  18. Measuring and Communicating the Value Created by an Organization (United States)

    Sherman, W. Richard


    This paper offers a different perspective in measuring the value created by an organization. It does so in the context of an undergraduate course in managerial accounting. In order to break down the functional silo approach to problem solving that has become the model of traditional business education, applications of shadow accounting, the…

  19. Creating an Authentic Learning Environment in the Foreign Language Classroom (United States)

    Nikitina, Larisa


    Theatrical activities are widely used by language educators to promote and facilitate language learning. Involving students in production of their own video or a short movie in the target language allows a seamless fusion of language learning, art, and popular culture. The activity is also conducive for creating an authentic learning situation…

  20. Lathe creates hardwood flakes for manufacture of "super strong" flakeboard (United States)

    P. Koch


    Most industry members got their first look at a prototype of the Koch lathe at this year's Southern Forest Products Assn. Machinery Exhibition held in Atlanta. With the residue from this machine, Dr. Peter Koch, project leader at the Southern Forest Experiment Station in Pineville, LA thinks it will be possible to create a flake that can be used for making a...

  1. Innovation Zones: Creating Policy Flexibility for Personalized Learning. Issue Brief (United States)

    Patrick, Susan; Gentz, Susan


    There is a new state education policy concept termed either innovation zones or districts of innovation. State education agencies interested in shifting their role from enforcing compliance to one of supporting innovation and building capacity in districts are working to spur new innovative instructional models and create space for…

  2. Creating Work Opportunities for the Poor through Home Community ...

    African Journals Online (AJOL)

    This article seeks to investigate how Home Community Based Care (HCBC) is used as a strategy to create work opportunities for the poor. Quantitative and qualitative data from 65 HCBC organisations with three years of active involvement in HCBC that are funded by the Department of Health was collected. This was done ...

  3. Creating a Single South African Keyboard Layout to Promote ...

    African Journals Online (AJOL)

    R.B. Ruthven

    examined, but strategic objectives such as ensuring its wide adoption and creating ... keyboard for all South African languages are also discussed. .... ease of use and adoption, considering the different types of users (touch ... guage pride, challenge negative language perceptions and build a ... 3.2 Revisiting orthographies.

  4. Duplex ultrasound: Indications and findings in a newly created ...

    African Journals Online (AJOL)

    Duplex ultrasound: Indications and findings in a newly created facility at the University of Calabar Teaching Hospital, Calabar. ... It is recommended that timely referrals be made, and mobile Doppler units be acquired to save more lives and limbs in the developing world. Keywords: Calabar, deep venous thrombosis, duplex ...

  5. Envisioning the Educational Possibilities of User-Created Virtual Worlds (United States)

    Antonacci, David M.; Modaress, Nellie


    Educational games and simulations can engage students in higher-level cognitive thinking, such as interpreting, analyzing, discovering, evaluating, acting, and problem solving. Recent technical advances in multiplayer, user-created virtual worlds have significantly expanded the capabilities of user interaction and development within these…

  6. Read, Sing, Play, and Create a Musical Storm (United States)

    Cardany, Audrey Berger


    Dayle Ann Dodds and Rosanne Litzinger's children's book, "Sing, Sophie!" provides the elementary general music teacher with an opportunity to read a captivating children's story, sing the main character's song and play her guitar, and create a song as well as instrumental music. Lessons outlined in this article may culminate in a veritable musical…

  7. The partnership of parents, educators and principles in creating a ...

    African Journals Online (AJOL)

    We investigated the partnership of parents, educators, and principals in creating a culture of teaching and learning in schools. To this end, a Culture of Learning and Teaching Partnership Scale (COLTPS) and Factors Contributing to the Decline of a Culture of Learning and Teaching Scale (FCDCOLTS) were used.

  8. Where am I? Creating spatial awareness in unmanned ground ...

    Indian Academy of Sciences (India)

    This paper presents a survey of Simultaneous Localization And Mapping (SLAM) algorithms for unmanned ground robots. SLAM is the process of creating a map of the environment, sometimes unknown a priori, while at the same time localizing the robot in the same map. The map could be one of different types i.e. metrical, ...

  9. Creating a School Community for Learning and Healing (United States)

    Bennett, Barbara


    Four years ago, the author assumed the job of Director of Education for a school serving elementary children who had been traumatized by homelessness and associated problems, such as family, domestic, or community violence. The paper relates the struggle of her staff to create a healing school out of a chaotic program that lacked both an effective…

  10. Creating E-Books in a Distributed and Collaborative Way. (United States)

    Perez, Ruth Cobos; Alaman, Xavier


    Describes how groups of authors can create electronic books through unsupervised collaborative work. Proposes a Web-based groupware system that allows building Web sites that can be considered as electronic books without the need of an editor, and describes experiences at the Universidad Autonoma de Madrid (Spain). (Author/LRW)

  11. "Changing Our Skin": Creating Collective Knowledge in American Classrooms (United States)

    Krechevsky, Mara


    In this essay, the author explores the notion that the focus of learning in classrooms and schools extends beyond the learning of individuals to create a collective body of knowledge that is larger than what any one person knows. This idea was examined in a collaboration between Project Zero researchers and educators from the municipal preschools…

  12. Creating Food Futures. Trade, Ethics and the Environment

    NARCIS (Netherlands)

    Farnworth, C.R.; Jiggins, J.L.S.; Thomas, E.V.


    A global transformation in food supply and consumption is placing our food security at risk. What changes need to be made to the ways we trade, process and purchase our food if everyone in the world is going to have enough wholesome food to eat? Is there genuine scope for creating food futures that

  13. Creating a conceptual hydrological soil response map for the ...

    African Journals Online (AJOL)


    Mar 3, 2014 ... a digital soil mapping (DSM) approach to soil mapping can speed up the mapping process and thereby extend soil map use in the field of ... This research uses an expert-knowledge DSM approach to create a soil map for Stevenson Hamilton .... the different bands of the Landsat and SPOT 5 images.

  14. Affective ambiences created with lighting for older people

    NARCIS (Netherlands)

    Kuijsters, A.; Redi, J.; Ruyter, B.E.R. de; Seuntiens, P.; Heynderickx, I.


    Current lighting technologies provide huge flexibility in creating ambiences that may be adapted to the needs of an occupant in a room. These ambiences not only satisfy visual needs, but may also improve people’s well-being. This paper describes one possible application of adaptable light ambiences,

  15. Creating Start-up Companies around NCI Inventions | Poster (United States)

    By Karen Surabian, Thomas Stackhouse, and Rose Freel, Contributing Writers, and Rosemarie Truman, Guest Writer The National Cancer Institute (NCI), led by the Technology Transfer Center (TTC),  the Avon Foundation, and The Center for Advancing Innovation have partnered to create a “first-of-a-kind” Breast Cancer Start-up Challenge.

  16. Creating quality improvement culture in public health agencies. (United States)

    Davis, Mary V; Mahanna, Elizabeth; Joly, Brenda; Zelek, Michael; Riley, William; Verma, Pooja; Fisher, Jessica Solomon


    We conducted case studies of 10 agencies that participated in early quality improvement efforts. The agencies participated in a project conducted by the National Association of County and City Health Officials (2007-2008). Case study participants included health directors and quality improvement team leaders and members. We implemented multiple qualitative analysis processes, including cross-case analysis and logic modeling. We categorized agencies according to the extent to which they had developed a quality improvement culture. Agencies were conducting informal quality improvement projects (n = 4), conducting formal quality improvement projects (n = 3), or creating a quality improvement culture (n = 4). Agencies conducting formal quality improvement and creating a quality improvement culture had leadership support for quality improvement, participated in national quality improvement initiatives, had a greater number of staff trained in quality improvement and quality improvement teams that met regularly with decision-making authority. Agencies conducting informal quality improvement were likely to report that accreditation is the major driver for quality improvement work. Agencies creating a quality improvement culture were more likely to have a history of evidence-based decision-making and use quality improvement to address emerging issues. Our findings support previous research and add the roles of national public health accreditation and emerging issues as factors in agencies' ability to create and sustain a quality improvement culture.

  17. Systematic Analysis of Splice-Site-Creating Mutations in Cancer. (United States)

    Jayasinghe, Reyka G; Cao, Song; Gao, Qingsong; Wendl, Michael C; Vo, Nam Sy; Reynolds, Sheila M; Zhao, Yanyan; Climente-González, Héctor; Chai, Shengjie; Wang, Fang; Varghese, Rajees; Huang, Mo; Liang, Wen-Wei; Wyczalkowski, Matthew A; Sengupta, Sohini; Li, Zhi; Payne, Samuel H; Fenyö, David; Miner, Jeffrey H; Walter, Matthew J; Vincent, Benjamin; Eyras, Eduardo; Chen, Ken; Shmulevich, Ilya; Chen, Feng; Ding, Li


    For the past decade, cancer genomic studies have focused on mutations leading to splice-site disruption, overlooking those having splice-creating potential. Here, we applied a bioinformatic tool, MiSplice, for the large-scale discovery of splice-site-creating mutations (SCMs) across 8,656 TCGA tumors. We report 1,964 originally mis-annotated mutations having clear evidence of creating alternative splice junctions. TP53 and GATA3 have 26 and 18 SCMs, respectively, and ATRX has 5 from lower-grade gliomas. Mutations in 11 genes, including PARP1, BRCA1, and BAP1, were experimentally validated for splice-site-creating function. Notably, we found that neoantigens induced by SCMs are likely several folds more immunogenic compared to missense mutations, exemplified by the recurrent GATA3 SCM. Further, high expression of PD-1 and PD-L1 was observed in tumors with SCMs, suggesting candidates for immune blockade therapy. Our work highlights the importance of integrating DNA and RNA data for understanding the functional and the clinical implications of mutations in human diseases. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

  18. Creating a Structured Support System for Postsecondary Success (United States)

    White, Carol Cutler


    For numerous reasons, it can be difficult for foster youth to succeed in postsecondary education. This chapter offers insight into state-level policies and programs, community college programs dedicating to supporting foster youth, and a framework for creating a structured support system to increase student success.

  19. Creating Quality Improvement Culture in Public Health Agencies (United States)

    Mahanna, Elizabeth; Joly, Brenda; Zelek, Michael; Riley, William; Verma, Pooja; Fisher, Jessica Solomon


    Objectives. We conducted case studies of 10 agencies that participated in early quality improvement efforts. Methods. The agencies participated in a project conducted by the National Association of County and City Health Officials (2007–2008). Case study participants included health directors and quality improvement team leaders and members. We implemented multiple qualitative analysis processes, including cross-case analysis and logic modeling. We categorized agencies according to the extent to which they had developed a quality improvement culture. Results. Agencies were conducting informal quality improvement projects (n = 4), conducting formal quality improvement projects (n = 3), or creating a quality improvement culture (n = 4). Agencies conducting formal quality improvement and creating a quality improvement culture had leadership support for quality improvement, participated in national quality improvement initiatives, had a greater number of staff trained in quality improvement and quality improvement teams that met regularly with decision-making authority. Agencies conducting informal quality improvement were likely to report that accreditation is the major driver for quality improvement work. Agencies creating a quality improvement culture were more likely to have a history of evidence-based decision-making and use quality improvement to address emerging issues. Conclusions. Our findings support previous research and add the roles of national public health accreditation and emerging issues as factors in agencies’ ability to create and sustain a quality improvement culture. PMID:24228680

  20. Creating a Safe Environment for Women's Leadership Transformation (United States)

    Debebe, Gelaye


    This study used qualitative data to describe how transformational learning was achieved in a women-only training (WOT) program. The article argues that an environment conducive to transformational learning for women was created from the harmonious coalescing of the presence of all-women participants and instructors with gender-sensitive teaching…

  1. Creating a climate for business success | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)


    Apr 10, 2014 ... Despite its persistent development challenges, Africa has some of ... Entrepreneurship has deep roots, but a number of barriers restrain private sector development. Many African economies are small and fragmented, having limited ... Supportive policies are needed to create a healthy business environment

  2. Creating Instructional Environments that Keep Students on TARGET (United States)

    Boyce, B. Ann


    Teachers' instructional decisions, such as lesson goals, how students are grouped, or how students are recognized and evaluated, can affect their students' level of motivation related to physical activity. A physical educator's primary responsibility is to create a classroom environment that enhances motivation and fosters positive attitudes and…

  3. E-gaze : create gaze communication for peoplewith visual disability

    NARCIS (Netherlands)

    Qiu, S.; Osawa, H.; Hu, J.; Rauterberg, G.W.M.


    Gaze signals are frequently used by the sighted in social interactions as visual cues. However, these signals and cues are hardly accessible for people with visual disability. A conceptual design of E-Gaze glasses is proposed, assistive to create gaze communication between blind and sighted people

  4. Impact Of Non-Governmental Organizations\\' Activities In Creating ...

    African Journals Online (AJOL)

    The study examines the impact of Non-Governmental Organizations\\' (NGOs) intervention in creating awareness and changing the mindset of people in typical rural communities in Kaduna State towards victims of HIV/AIDS. Structured questionnaire were used to collect data from adult male and female as well as young ...

  5. Young Children Create Iconic Gestures to Inform Others (United States)

    Behne, Tanya; Carpenter, Malinda; Tomasello, Michael


    Much is known about young children's use of deictic gestures such as pointing. Much less is known about their use of other types of communicative gestures, especially iconic or symbolic gestures. In particular, it is unknown whether children can create iconic gestures on the spot to inform others. Study 1 provided 27-month-olds with the…

  6. Developing "Emancipatory Interest": Learning to Create Social Change (United States)

    Caspersz, Donella; Olaru, Doina


    Developing an emancipatory interest enables individuals to free themselves from the intersubjective or commonly held meanings that dominate their understanding of their current world, and subsequently change their practices. We argue that developing an emancipatory interest is critical in learning to create social change, that is, wanting to…

  7. Reflecting User-Created Persona in Indigenous Namibia

    DEFF Research Database (Denmark)

    Gonzalez-Cabrero, Daniel; Koch Kapuire, Gereon; Winschiers-Theophilus, Heike


    This paper presents the initial experiences and reflective accounts on the arrival of a European research colleague who recently joined our team of researchers working with Indigenous communities in Namibia. He aims to explore how communities across Namibia take on, understand and create persona...

  8. Governing Bodies That Consider Joining or Creating Federations (United States)

    Howarth, Eleanor


    This article reports the findings of a research study exploring what motivates governing bodies to consider joining or creating a federation, their experiences of the process and the barriers faced. The research methodology involved semi-structured telephone interviews, face-to-face interviews and analysis of relevant documentation. The varied…

  9. Implementing Public-Private Partnerships in Agriculture. Creating ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ida St-Martin


    Mar 26, 2012 ... that agriculture can be improved by creating specific solutions along the value chain. .... How can research such as that produced by the CGIAR system help the New Vision for ..... include projects dealing with vaccinations for goats, fertilizer, ..... the war against malaria means eliminating the parasite and ...

  10. Practicing Statistics by Creating Exercises for Fellow Students (United States)

    Bebermeier, Sarah; Reiss, Katharina


    This article outlines the execution of a workshop in which students were encouraged to actively review the course contents on descriptive statistics by creating exercises for their fellow students. In a first-year statistics course in psychology, 39 out of 155 students participated in the workshop. In a subsequent evaluation, the workshop was…

  11. Queer Girls and Popular Culture: Reading, Resisting, and Creating Media (United States)

    Blackburn, Mollie V.


    This article reviews Driver's monograph, "Queer Girls and Popular Culture: Reading, Resisting, and Creating Media," reporting on queer girls' active engagement with television characters, films, lesbian magazines, online communities, and music. She explores the consequences of their engagements with these media on their lives and their…

  12. Applying Andragogical Concepts in Creating a Sustainable Lifelong Learning Society (United States)

    Charungkaittikul, Suwithida; Henschke, John A.


    Today, the world is changing, re-establishing the role of education to have a developed society. This article aims to explore the practical application of Andragogy as a key element for creating a sustainable lifelong learning society, to propose strategies for developing a lifelong learning society using andragogical concepts, to enhance…

  13. Creating a single South African keyboard layout to promote language

    African Journals Online (AJOL)

    Not only are problems such as researching the orthographies, key placement and keyboard input options examined, but strategic objectives such as ensuring its wide adoption and creating a multilingual keyboard for all South African languages are also discussed. The result is a keyboard that furthers multilingualism and ...

  14. Towards creating believable decoy project folders for detecting data theft

    NARCIS (Netherlands)

    Thaler, S.; den Hartog, J.; Petkovic, M.


    Digital data theft is difficult to detect and typically it also takes a long time to discover that data has been stolen. This paper introduces a data-driven approach based on Markov chains to create believable decoy project folders which can assist in detecting potentially ongoing attacks. This can

  15. Creating a conceptual hydrological soil response map for the ...

    African Journals Online (AJOL)

    The use of a digital soil mapping (DSM) approach to soil mapping can speed up the mapping process and thereby extend soil map use in the field of hydrology. This research uses an expert-knowledge DSM approach to create a soil map for Stevenson Hamilton Research Supersite within the Kruger National Park, South ...

  16. Creating Cultures of Integrity: Ethics Education in UK Business Schools (United States)

    Bell, Emma; Caulfield, Paul; Hibbert, Paul; Jennings, Paul


    Recent corporate scandals and responses by regulators have created an environment in which there is a heightened awareness of business ethics. This report presents a series of case studies exploring how the current curricula in UK business schools could be scoped differently to give new business leaders the tools required for strong ethical…

  17. Pharmacology Students' Perceptions of Creating Multimodal Digital Explanations (United States)

    Nielsen, W.; Hoban G.; Hyland, C. J. T.


    Students can now digitally construct their own representations of scientific concepts using a variety of modes including writing, diagrams, 2-D and 3-D models, images or speech, all of which communicate meaning. In this study, final-year chemistry students studying a pharmacology subject created a ''blended media'' digital product as an assignment…

  18. Second Life: Creating Worlds of Wonder for Language Learners (United States)

    Ocasio, Michelle A.


    This article describes Second Life, a three-dimensional virtual environment in which a user creates an avatar for the purpose of socializing, learning, developing skills, and exploring a variety of academic and social areas. Since its inception in 2003, Second Life has been used by educators to build and foster innovative learning environments and…

  19. Situation Creator: A Pedagogical Agent Creating Learning Opportunities

    NARCIS (Netherlands)

    Miao, Yongwu; Hoppe, Ulrich; Pinkwart, Niels


    Miao, Y., Hoppe, H. U., & Pinkwart, N. (2007). Situation Creator: A Pedagogical Agent Creating Learning Opportunities. In R. Luckin, K. Koedinger & J. Greer (Eds.), Proceedings of the 13th International Conference on Artificial Intelligence in Education (pp. 614-617). Amsterdam, The Netherlands: IOS

  20. Creating Student Engagement: The Kickstarter Active Learning Project (United States)

    Manzon, Elliott


    Students can become disengaged from marketing material if they cannot see the direct application. Marketing material needs to be applied to a meaningful business task to engage and motivate students. This article introduces the Kickstarter Active Learning Project--an innovative semester-long project in which students create a Kickstarter…

  1. Creating Sustainable Societies: Developing Emerging Professionals through Transforming Current Mindsets (United States)

    Griswold, Wendy


    Future professionals will bear the brunt of creating sustainable societies. Equipping them for the task is the challenge of current educators. Educational experiences facilitating the development of sustainable habits of mind are needed. This research reports on the experiences of developing scientists and engineers engaged in a sustainable energy…

  2. Exploring Metaskills of Knowledge-Creating Inquiry in Higher Education (United States)

    Muukkonen, Hanni; Lakkala, Minna


    The skills of knowledge-creating inquiry are explored as a challenge for higher education. The knowledge-creation approach to learning provides a theoretical tool for addressing them: In addition to the individual and social aspects in regulation of inquiry, the knowledge-creation approach focuses on aspects related to advancing shared objects of…

  3. Creating an International Network of Democracy Builders | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Creating an International Network of Democracy Builders. The Centre for the Study of Democracy (CSD) at Queen's University will conduct three case studies on democratic transition in Liberia, Costa Rica and Palestine, partnering with the Sua Foundation, the Arias Foundation and the Arab Thought Forum, respectively.

  4. Learning strategies of workers in the knowledge creating company

    NARCIS (Netherlands)

    Poell, R.F.; van der Krogt, F.J.


    This study presents a critical examination of Nonaka and Takeuchi's theory about knowledge-creating companies (1995), taken as one example of contemporary management theories concerning innovation and learning. Two main questions are investigated. First, how is the learning of workers organized in

  5. Creating Spaces for Reconstructing Knowledge in Feminist Pedagogy. (United States)

    Thompson, Audrey; Gitlin, Andrew


    Presents a conceptual outline for a feminist pedagogy that attempts to develop reconstructed knowledge. The paper describes how standpoint theory and conversation as method can further the aim of reconstructed knowledge, arguing that teachers and students with pedagogical relations should seek opportunities to create spaces within which to…

  6. Creating Science Picture Books for an Authentic Audience (United States)

    DeFauw, Danielle L.; Saad, Klodia


    This article presents an authentic writing opportunity to help ninth-grade students use the writing process in a science classroom to write and illustrate picture books for fourth-grade students to demonstrate and share their understanding of a biology unit on cells. By creating a picture book, students experience the writing process, understand…

  7. Student-Created Public Relations for Gifted Education. (United States)

    Bisland, Amy


    This article discusses the benefits of student participation in a gifted public relations campaign, including creating public support for gifted programming and developing leadership skills. Steps for developing a formal unit of instruction on public relations are described, along with ideas for public relations activities. (Contains references.)…

  8. Advanced hydraulic fracturing methods to create in situ reactive barriers

    International Nuclear Information System (INIS)

    Murdoch, L.; Siegrist, B.; Vesper, S.


    Many contaminated areas consist of a source area and a plume. In the source area, the contaminant moves vertically downward from a release point through the vadose zone to an underlying saturated region. Where contaminants are organic liquids, NAPL may accumulate on the water table, or it may continue to migrate downward through the saturated region. Early developments of permeable barrier technology have focused on intercepting horizontally moving plumes with vertical structures, such as trenches, filled with reactive material capable of immobilizing or degrading dissolved contaminants. This focus resulted in part from a need to economically treat the potentially large volumes of contaminated water in a plume, and in part from the availability of construction technology to create the vertical structures that could house reactive compounds. Contaminant source areas, however, have thus far remained largely excluded from the application of permeable barrier technology. One reason for this is the lack of conventional construction methods for creating suitable horizontal structures that would place reactive materials in the path of downward-moving contaminants. Methods of hydraulic fracturing have been widely used to create flat-lying to gently dipping layers of granular material in unconsolidated sediments. Most applications thus far have involved filling fractures with coarse-grained sand to create permeable layers that will increase the discharge of wells recovering contaminated water or vapor. However, it is possible to fill fractures with other compounds that alter the chemical composition of the subsurface. One early application involved development and field testing micro-encapsulated sodium percarbonate, a solid compound that releases oxygen and can create aerobic conditions suitable for biodegradation in the subsurface for several months

  9. Creating Opportunities for Organizational Leadership (COOL): Creating a culture and curriculum that fosters psychiatric leadership development and quality improvement. (United States)

    Dickey, Chandlee; Dismukes, Rodney; Topor, David


    The authors describe the Harvard South Shore Psychiatry Residency Training Program curriculum "Creating Opportunities for Organizational Leadership," an innovative, multitiered, resident-driven, outcome-focused set of experiences designed to develop residents' leadership skills in personal leadership, organizational leadership, negotiation, strategic thinking, and systems redesign.

  10. Generative design visualize, program, and create with processing

    CERN Document Server

    Bohnacker, Hartmut; Laub, Julia; Lazzeroni, Claudius


    Generative design is a revolutionary new method of creating artwork, models, and animations from sets of rules, or algorithms. By using accessible programming languages such as Processing, artists and designers are producing extravagant, crystalline structures that can form the basis of anything from patterned textiles and typography to lighting, scientific diagrams, sculptures, films, and even fantastical buildings. Opening with a gallery of thirty-five illustrated case studies, Generative Design takes users through specific, practical instructions on how to create their own visual experiments by combining simple-to-use programming codes with basic design principles. A detailed handbook of advanced strategies provides visual artists with all the tools to achieve proficiency. Both a how-to manual and a showcase for recent work in this exciting new field, Generative Design is the definitive study and reference book that designers have been waiting for.

  11. Creating An Alternative Design for Asita Corporate Identity

    Directory of Open Access Journals (Sweden)

    Michelle Elise


    Full Text Available The objective of the study is to find the solution to the problem outlined, which is to create an alternative design for corporate identity of ASITA. ASITA is a non-profit organization to foster tours and travel agencies in Indonesia. The writer conducted interview to the ASITA Jakarta Chapter, which was appointed to represent ASITA in providing the data needed by the writer. The writer interviewed the advisor of the organization, which had once served as chairperson of ASITA. The result of the research is new corporate identity system of ASITA based on a concept that ASITA as an organization, serves as a compass that guides and assists in every direction. The writer found that corporate identity is an important element to define an organization as well as giving impact on its first impression. To create good corporate identity, several things such as elements of design, color, typography, etc need to be put into attention. 

  12. Can Participatory Action Research Create Value for Business Model Innovation?

    DEFF Research Database (Denmark)

    Sparre, Mogens; Rasmussen, Ole Horn; Fast, Alf Michael

    Innovation (BMI)?” – has been investigated from five different perspectives based upon The Business Model Cube and The Where to Look Model. Using both established and newly developed tools the paper presents how. Theory and data from two cases are presented and it is demonstrated how industry increase......Abstract: Participatory Action Research (PAR) has a longer academic history compared with the idea of business models (BMs). This paper indicates how industries gain by using the combined methodology. The research question "Can participatory action research create value for Business Model...... their monetary and/or non-monetary value creation doing BMI based upon PAR. The process is essential and using the methodology of PAR creates meaning. Behind the process, the RAR methodology and its link to BM and BMI may contribute to theory construction and creation of a common language in academia around...

  13. The Alternative Way of Creating Infographics Using SVG Technology

    Directory of Open Access Journals (Sweden)

    Sandra Pavazza


    Full Text Available The article develops new ways of creating and using interactive SVG infographics. The emphasis lies on the compatibility of SVG standard with other web standards, like XML, XSL, CSS, SMIL and ECMAScript, the advantages that it brings are particularly explored. There is a XSLT template developed which transforms XML data into SVG infographic, and the way of achieving complete control over data and data visualization is tested. This enabled the achieving of dynamic control of content and its presentation, and contributed to the results in reduced developing cost and time, better flexibility and reliability of the organizational system. The paper also studied the possibility to convey infographic message by adding interactivity, and explored technologies by means of which this can be achieved. The aspects of establishing a more efficient communication with end users, such as searchability and accessibility are also considered. SVG infographics are compared with other approaches for creating infographics in raster and vector techniques.

  14. Restructuring the Russian electricity sector: Re-creating California?

    International Nuclear Information System (INIS)

    Pittman, Russell


    The Russian Federation has begun restructuring its electricity sector, following the standard restructuring model of complete vertical separation of generation from transmission, with the aim of creating competition in regional generation markets. This paper examines the structure of the six principal regional generation markets that are in their early stages of development and argues that they are likely to be characterized by high levels of market power on the part of individual privatized generation companies, especially during the peak winter demand season. These levels-considerably higher than those that caused competitive problems in California-seem to create a serious risk of price spikes in deregulated wholesale electricity markets, and thus of significant price increases to consumers of electricity

  15. Hybrid membrane contactor system for creating semi-breathing air (United States)

    Timofeev, D. V.


    Typically, the equipment to create an artificial climate does not involve changing the composition of the respiratory air. In particular in medical institutions assumes the existence of plant of artificial climate and disinfection in operating rooms and intensive care wards. The use of a hybrid membrane-absorption systems for the generation of artificial atmospheres are improving the respiratory system, blood is enriched or depleted of various gases, resulting in increased stamina, there is a better, faster or slower metabolism, improves concentration and memory. Application of the system contributes to easy and rapid recovery after the operation. By adding a special component, with drug activity, air ionization, and adjust its composition, you can create a special, more favorable for patients with the atmosphere. These factors allow for the treatment and rehabilitation of patients and reduce mortality of heavy patients.

  16. Creating an Authentic Learning Environment in the Foreign Language Classroom

    Directory of Open Access Journals (Sweden)

    Larisa Nikitina


    Full Text Available Theatrical activities are widely used by language educators to promote and facilitate language learning. Involving students in production of their own video or a short movie in the target language allows a seamless fusion of language learning, art, and popular culture. The activity is also conducive for creating an authentic learning situation where the real world becomes a part of the educational experience and necessitates the use of an authentic language by the learners. This article describes a video project carried out by Russian language learners at Universiti Malaysia Sabah (UMS. It examines how the work on the project created and supported authenticity of the learning experience. Though the article focuses on the video project done in the context of language learning and teaching this activity could be successfully implemented in teaching various subjects at both secondary and tertiary levels.

  17. Creating an AI modeling application for designers and developers (United States)

    Houlette, Ryan; Fu, Daniel; Jensen, Randy


    Simulation developers often realize an entity's AI by writing a program that exhibits the intended behavior. These behaviors are often the product of design documents written by designers. These individuals, while possessing a vast knowledge of the subject matter, might not have any programming knowledge whatsoever. To address this disconnect between design and subsequent development, we have created an AI application whereby a designer or developer sketches an entity's AI using a graphical "drag and drop" interface to quickly articulate behavior using a UML-like representation of state charts. Aside from the design-level benefits, the application also features a runtime engine that takes the application's data as input along with a simulation or game interface, and makes the AI operational. We discuss our experience in creating such an application for both designer and developer.

  18. Creating New Medical Ontologies for Image Annotation A Case Study

    CERN Document Server

    Stanescu, Liana; Brezovan, Marius; Mihai, Cristian Gabriel


    Creating New Medical Ontologies for Image Annotation focuses on the problem of the medical images automatic annotation process, which is solved in an original manner by the authors. All the steps of this process are described in detail with algorithms, experiments and results. The original algorithms proposed by authors are compared with other efficient similar algorithms. In addition, the authors treat the problem of creating ontologies in an automatic way, starting from Medical Subject Headings (MESH). They have presented some efficient and relevant annotation models and also the basics of the annotation model used by the proposed system: Cross Media Relevance Models. Based on a text query the system will retrieve the images that contain objects described by the keywords.

  19. Playing with the Camera - Creating with Each Other

    DEFF Research Database (Denmark)

    Vestergaard, Vitus


    , it is imperative to investigate how museum users in a group create videos and engage with each other and the exhibits. Based on research on young users creating videos in the Media Mixer, this article explores what happens during the creative process in front of a camera. Drawing upon theories of museology, media......Many contemporary museums try to involve users as active participants in a range of new ways. One way to engage young people with visual culture is through exhibits where users produce their own videos. Since museum experiences are largely social in nature and based on the group as a social unit......, learning and creativity, the article discusses how to operationalize and make sense of seemingly chaotic or banal production processes in a museum....

  20. Creating Simple Windchill Admin Tools Using Info*Engine (United States)

    Jones, Corey; Kapatos, Dennis; Skradski, Cory


    Being a Windchill administrator often requires performing simple yet repetitive tasks on large sets of objects. These can include renaming, deleting, checking in, undoing checkout, and much more. This is especially true during a migration. Fortunately, PTC has provided a simple way to dynamically interact with Windchill using Info*Engine. This presentation will describe how to create simple Info*Engine tasks capable of saving Windchill 10.0 administrators hours of tedious work. It will also show how these tasks can be combined and displayed on a simple JSP page that acts as a "Windchill Administrator Dashboard/Toolbox". The attendee will learn some valuable tasks Info*Engine capable of performing. The attendee will gain a basic understanding of how to perform and implement Info*Engine tasks. The attendee will learn what's involved in creating a JSP page that displays Info*Engine tasks

  1. Solving Complex Problems to Create Charter Extension Options

    DEFF Research Database (Denmark)

    Tippmann, Esther; Nell, Phillip Christopher

    undertaken by 29 subsidiary units supports our hypotheses, demonstrating that these activities are a means to systematically reduce inherent problem solving biases. This study contributes to problem solving theory, the literature on headquarters’ roles in complex organizations, as well as the literature......This study examines subsidiary-driven problem solving processes and their potential to create advanced solutions for charter extension options. Problem solving theory suggests that biases in problem formulation and solution search can confine problem solving potential. We thus argue that balanced...... solution search, or activities to reconcile the need for some solution features to be locally-tailored while others can be internationally standardized, mediates the relationships between problem complexity/headquarters involvement and the capacity to create advanced solutions. An analysis of 67 projects...

  2. A teen's guide to creating web pages and blogs

    CERN Document Server

    Selfridge, Peter; Osburn, Jennifer


    Whether using a social networking site like MySpace or Facebook or building a Web page from scratch, millions of teens are actively creating a vibrant part of the Internet. This is the definitive teen''s guide to publishing exciting web pages and blogs on the Web. This easy-to-follow guide shows teenagers how to: Create great MySpace and Facebook pages Build their own unique, personalized Web site Share the latest news with exciting blogging ideas Protect themselves online with cyber-safety tips Written by a teenager for other teens, this book leads readers step-by-step through the basics of web and blog design. In this book, teens learn to go beyond clicking through web sites to learning winning strategies for web design and great ideas for writing blogs that attract attention and readership.

  3. The strongly coupled quark-gluon plasma created at RHIC

    CERN Document Server

    Heinz, Ulrich W


    The Relativistic Heavy Ion Collider (RHIC) was built to re-create and study in the laboratory the extremely hot and dense matter that filled our entire universe during its first few microseconds. Its operation since June 2000 has been extremely successful, and the four large RHIC experiments have produced an impressive body of data which indeed provide compelling evidence for the formation of thermally equilibrated matter at unprecedented temperatures and energy densities -- a "quark-gluon plasma (QGP)". A surprise has been the discovery that this plasma behaves like an almost perfect fluid, with extremely low viscosity. Theorists had expected a weakly interacting gas of quarks and gluons, but instead we seem to have created a strongly coupled plasma liquid. The experimental evidence strongly relies on a feature called "elliptic flow" in off-central collisions, with additional support from other observations. This article explains how we probe the strongly coupled QGP, describes the ideas and measurements whi...

  4. Bully Prevention: Creating Safe and Inclusive Environments for Youth

    Directory of Open Access Journals (Sweden)

    Kimberly Allen


    Full Text Available Bullying is a major issue facing youth of all ages, backgrounds, and walks of life. In fact, 30% of youth report experiencing bullying on a monthly basis (Nansel, Overpeck, Pilla, Ruan, Simons-Murton & Scheidt, 2001. As a consequence, these youth are at much greater risk for a host of mental and physical problems (Ttofi & Farrington, 2008. Parents, teachers, educators and youth advocates all agree that this issue merits time and attention, yet many professionals are at a loss for understanding the issue or what resources might be most effective with their young audience. With the increased rates of bullying behaviors and growing research about effective prevention and intervention strategies, youth development professionals need guidance for creating and sustaining bully prevention efforts. The purpose of this article is to highlight the growing research on bully prevention and provide information for practitioners working to create safe and inclusive environments for youth.

  5. Advanced hydraulic fracturing methods to create in situ reactive barriers

    International Nuclear Information System (INIS)

    Murdoch, L.


    This article describes the use of hydraulic fracturing to increase permeability in geologic formations where in-situ remedial action of contaminant plumes will be performed. Several in-situ treatment strategies are discussed including the use of hydraulic fracturing to create in situ redox zones for treatment of organics and inorganics. Hydraulic fracturing methods offer a mechanism for the in-situ treatment of gently dipping layers of reactive compounds. Specialized methods using real-time monitoring and a high-energy jet during fracturing allow the form of the fracture to be influenced, such as creation of assymmetric fractures beneath potential sources (i.e. tanks, pits, buildings) that should not be penetrated by boring. Some examples of field applications of this technique such as creating fractures filled with zero-valent iron to reductively dechlorinate halogenated hydrocarbons, and the use of granular activated carbon to adsorb compounds are discussed


    Directory of Open Access Journals (Sweden)

    Monika Skorek


    Full Text Available The paper presents an explanation of the essence of creation of consumer communities that have been developing for several years on the marketing market. A hypothesis was made that says that the mechanism of interdependence existing in the consumer community can be used to create sustainable consumption on the market. The method of literature study was used in the article. In the introduction it was proved that regardless of whether a community is formed independently around the brand or not, its existence is initiated by a company and its members interact by providing one another with the patterns of consumption. The reasons for consumers’ belonging to communities around the brand were described. The presented literature analysis revealed that the appropriate management of the community around the brand can serve the company to create a sustainable product consumption. 

  7. Digital Natives: Creating Emergent Exhibitions through Digital Technologies

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Iversen, Ole Sejer; Dindler, Christian


    . In this way, digital technology can contribute to the creation of emergent exhibitions in which the exhibition is created in dialogue between audiences and the museum. We present experiences from a current research project, the Digital Natives exhibition, in which digital technology was designed......Digital Technology can support the creation of dialogical spaces in the museum, both playful and reflective, that allow audiences to engage in the ongoing construction and reproduction of cultural heritage creating novel connections between self and others and between past, present and future...... as an integral part of the exhibition to encourage dialogue between audiences and the exhibition materials and thereby investigate how the exhibition emerge as a result of this dialogic co-construction inside the exhibition space. In short, the opportunities offered by digital technologies prompts us to consider...

  8. Implement the medical group revenue function. Create competitive advantage. (United States)

    Colucci, C


    This article shows medical groups how they can employ new financial management and information technology techniques to safeguard their revenue and income streams. These managerial techniques stem from the application of the medical group revenue function, which is defined herein. This article also describes how the medical group revenue function can be used to create value by employing a database and a decision support system. Finally, the article describes how the decision support system can be used to create competitive advantage. Through the wise use of internally generated information, medical groups can negotiate better contract terms, improve their operations, cut their costs, embark on capital investment programs and improve market share. As medical groups gain market power by improving in these areas, they will be more attractive to potential strategic allies, payers and investment bankers.

  9. How Real Detector Thresholds Create False Standard Candles

    International Nuclear Information System (INIS)

    Shahmoradi, Amir; Nemiroff, Robert


    GRB satellites are relatively inefficient detectors of dim hard bursts. For example, given two bursts of identical peak luminosity near the detection threshold, a dim soft burst will be preferentially detected over a dim hard burst. This means that a high E peak burst will need a higher peak luminosity to be detected than a low E peak GRB. This purely detector-created attribute will appear as a correlation between E peak and luminosity, and should not be interpreted as a real standard candle effect. This result derives from Monte Carlo simulations utilizing a wide range of initial GRB spectra, and retriggering to create a final ''detected'' sample. In sum, E peak is not a good standard candle, and its appearance as such in seeming correlations such as the Amati and other L iso vs. E peak relations is likely a ghost of real energy-related detection thresholds.

  10. Monolithic optofluidic ring resonator lasers created by femtosecond laser nanofabrication. (United States)

    Chandrahalim, Hengky; Chen, Qiushu; Said, Ali A; Dugan, Mark; Fan, Xudong


    We designed, fabricated, and characterized a monolithically integrated optofluidic ring resonator laser that is mechanically, thermally, and chemically robust. The entire device, including the ring resonator channel and sample delivery microfluidics, was created in a block of fused-silica glass using a 3-dimensional femtosecond laser writing process. The gain medium, composed of Rhodamine 6G (R6G) dissolved in quinoline, was flowed through the ring resonator. Lasing was achieved at a pump threshold of approximately 15 μJ mm(-2). Detailed analysis shows that the Q-factor of the optofluidic ring resonator is 3.3 × 10(4), which is limited by both solvent absorption and scattering loss. In particular, a Q-factor resulting from the scattering loss can be as high as 4.2 × 10(4), suggesting the feasibility of using a femtosecond laser to create high quality optical cavities.

  11. NMR studies of defects created by irradiation in metals

    International Nuclear Information System (INIS)

    Minier, M.; Minier, C.


    Nuclear Magnetic Resonance has been rarely used to study point defects created by irradiation in metals. Information obtained in this field using N.M.R. are shown. Some results are also described: characterization of migrating defects in electron irradiated copper; mobility of the complex interstitial-impurity in Al with 150 ppm of chromium; interstitial structure in irradiated aluminum and autodiffusion in metals [fr

  12. Socio-spatial authenticity at co-created music festivals


    Szmigin, I; Bengry-Howell, A; Morey, Y; Griffin, C; Riley, S


    From the early days of hippie counter-culture, music festivals have been an important part of the British summer. Today they are commercialised offerings without the counter-cultural discourse of earlier times. Drawing on participant observation, interviews and focus groups conducted at a rock festival and a smaller boutique festival, the paper examines how their design, organisation and management are co-created with participants to produce authentic experiences. The paper contributes to res...

  13. On the impossibility of creating the quantum correlations with computer

    International Nuclear Information System (INIS)

    Vinduska, M.


    It is indicated that Feynman's proof about the impossibility of creating the quantum correlations with computers does not hold if the general transformations of the probability measure of the treated systems do not for a group. In the paper the consequences of this fact are considered in relation to the Bell inequalities and to the models of relative probability measure on the concave surfaces. 5 refs.; 4 figs.; 2 tabs

  14. Creating non-believed memories for recent autobiographical events


    Clark, A; Nash, RA; Fincham, G; Mazzoni, G


    A recent study showed that many people spontaneously report vivid memories of events that they do not believe to have occurred [1]. In the present experiment we tested for the first time whether, after powerful false memories have been created, debriefing might leave behind nonbelieved memories for the fake events. In Session 1 participants imitated simple actions, and in Session 2 they saw doctored video-recordings containing clips that falsely suggested they had performed additional (fake) ...

  15. Marketing a destination: Case of CreateTrips and Mexico


    Tiainen, Johanna; Korvenpää, Emmi


    This thesis concentrates on Finnish people travelling to Mexico. Firstly, the writers conduct a quantitative research, a questionnaire, that studies Finnish people’s thoughts and presumptions about Mexico. Secondly, they create mobile travel guides of four different destinations. The questionnaire concentrates on the people’s point of view, asking what people think about Mexico, on what kind of trip would they go it they travel there, how long it would last and so on. The questionnaire also h...

  16. Entrepreneurs skills for creating and managing IT projects


    Sousa, M. J.; Almeida, M. R.


    This article we will analyze the concept of entrepreneurship and the importance of skills development for entrepreneurs to create and manage IT projects. The problem studied in this research was to identify skills for developing an IT culture of entrepreneurship and the main objective was to build a model of skills development for IT entrepreneurs. To accomplish this research it was developed a search of articles based on the keywords "entrepreneurship" and "skills of IT entrepreneurs”, the p...

  17. Creating employees' motivational paths in the retail trade


    Kantanen Teuvo; Julkunen Saara; Hiltunen Esa; Nickell David


    This study examines the manifestation of intrinsic motivation by exploring the sources of intrinsic and extrinsic motivation among employees of a retail hypermarket. The research uses narrative and ethnographical analysis from 24 interviews. Two unique dimensions were created for motivational power—source and growth process—for a new typology of work motivation. The typology consists of four processes: intrinsic regulation, intrinsic valuation, extrinsic valuation, and extrinsic regulation. T...

  18. Newspapers and Parties: How Advertising Revenues Created an Independent Press


    Maria Petrova


    Does economic development promote media freedom? Do higher advertising revenues tend to make media outlets independent of political groups?in?uence? Using data on the 19th century American newspapers, I show that in places with higher advertising revenues, newspapers were more likely to be independent from political parties. Similar results hold when local advertising rates are instrumented by regulations on outdoor advertising and newspaper distribution. I also show that newly created newspa...

  19. Compete or Leapfrog: Creating Blue Ocean through Entrepreneurial Orientation


    Arslan Ayub; Muhammad Salman Aslam; Hanan Iftekhar; Adeel Razzaq; Sabiha Hafeez


    The study analyzes the role of entrepreneurial orientation with mediating effect of knowledge creation process to creating Blue Ocean in corporate sector in Pakistan There is an increasing competition among companies due to globalization and technological advancements. Thus, it requires a study to measure the multifaceted influence of entrepreneurial orientation on knowledge creation process and Blue Ocean besides the actual paradigm of this terminology. This concept has been well discussed i...

  20. Evolutionary Data Mining Approach to Creating Digital Logic (United States)


    To deal with this problem a genetic program (GP) based data mining ( DM ) procedure has been invented (Smith 2005). A genetic program is an algorithm...that can operate on the variables. When a GP was used as a DM function in the past to automatically create fuzzy decision trees, the Report...rules represents an approach to the determining the effect of linguistic imprecision, i.e., the inability of experts to provide crisp rules. The

  1. Creating Value Through the Freemium Business Model: A Consumer Perspective


    Rietveld, Joost


    textabstractThis paper develops a consumer-centric framework for creating value through the freemium business model. Goods that are commercialized through the freemium business model offer basic functionality for free and monetize users for extended use or complementary features. Compared to premium goods, freemium goods have lower barriers to adoption and allow end-users to accurately assess and act on their willingness to pay. On the other hand, convincing users to spend money on freemium g...

  2. AutoCTF: Creating Diverse Pwnables via Automated Bug Injection (United States)


    Proceedings of the Twenty-Sixth AAAI Conference on Artificial Intelligence (2012), AAAI’12, AAAI Press, pp. 1620–1627. [19] SZARKA, G. Blinker. be created from the same initial program. Although CTF challenges are fun, engaging and gen- erally thought to be a good vehicle for cybersecurity ...vulnerabilities and how players find and exploit them. We believe this research has the potential to not only improve cybersecurity ed- ucation but also

  3. Creating iPhone Apps with Cocoa Touch

    CERN Document Server

    Hockenberry, Craig


    Creating iPhone Apps with Cocoa Touch: The Mini Missing Manual walks you through developing your first iPhone App and introduces you to your programming environments and tools: Cocoa Touch, Interface Builder, Xcode, and the Objective-C programming language. If you're a Java or C developer, this eBook is your fast track to App development. This eBook is adapted from parts of iPhone App Development: The Missing Manual.

  4. When Demand Creates its Own Supply: Saving Traps


    Christophe Chamley


    The mechanism by which aggregate supply creates the income that generates its matching demand (called Say's Law), may not work in a general equilibrium with decentralized markets and savings in bonds or money. Full employment is an equilibrium, but convergence to that state is slow. A self-fulfilling precautionary motive to accumulate bonds (with a zero aggregate supply) can set the economy on an equilibrium path with a fast convergence towards a steady state with unemployment that may be an ...

  5. Girls Creating Games: Challenging Existing Assumptions about Game Content


    Denner, Jill


    In a reinforcing cycle, few females create games, and fewer girls than boys play games. According to the Interactive Digital Software Association’s 2003 survey, 72% of all video game players are male. This is unfortunate, as early game playing not only fosters specific cognitive and motor skills (Subrahmanyam, Kraut, Greenfield, & Gross, 2000), it is also a gateway to shaping the future of technology. How can we better attract, engage, and sustain the interests of girls in gaming? One str...

  6. EU copyright protection of works created by artificial intelligence systems


    Bøhler, Helene Margrethe


    This thesis is concerned with copyright regulation of works created by artificial intelligence systems. The rapid advances in artificial intelligence are calling into question some of the fundamental assumptions upon which intellectual property law rests. Currently, the European framework of copyright law does not take non-human innovation into account. Meanwhile, advances in artificial intelligence are quickly making machine-generation of creative works a reality. Institutions of the Europea...

  7. Creating a board game for encouraging emotional intelligence


    Galič, Kaja


    The main focus of this thesis is on creating a board game for encouraging emotional intelligence of children in early childhood. Game is based on the Four-Branch Model which was proposed by Mayer and Salovey (1997). Board game covers emotional skills, which include the abilities to perceive emotions in oneself and other, to use emotions, to understand emotions and to manage emotions. Game was tested in Kindergarten Ledina Ljubljana and Kindergarten Mavrica Brežice. 57 children, aged five and ...



    Sailin, Siti Nazuar; Mahmor, Noor Aida


    Students in this 21st century are required to acquire these 4C skills: Critical thinking, Communication, Collaboration and Creativity. These skills can be integrated in the teaching and learning through innovative teaching that promotes active and meaningful learning. One way of integrating these skills is through collaborative knowledge creation and sharing. This paper providesan example of meaningful teaching and learning activities designed within the Create-Share-Collaborate instructional...

  9. Investing in Health to Create a Third Demographic Dividend. (United States)

    Fried, Linda P


    The world is aging as a result of unprecedented successes worldwide adding 30 years of life expectancy and presenting great opportunities for all of society, but only if we invest effectively. This article, written as a requested background article for the World Health Organization 2015 World Report on Aging, proposes that creating health into the oldest ages could lay the basis for a third demographic dividend resulting from the societal benefits from the generative social capital of older adults, on top of the second demographic dividend's savings associated with longer lives. The combination would contribute to stronger and wealthier societies, greater success of the young, and increased societal ability to provide the humane supports needed at the end of life, plus a dividend that would endure. We now know that prevention works at every age and into the oldest ages. A life-course approach to prevention and health promotion is the key investment. The creation of geriatrically knowledgeable and integrated public health, medical and social care systems has the potential to amplify capabilities and well-being to the end of life. Healthy older populations bring both desire for engagement and unique talents. Institutions designed to create impactful roles for older adults to contribute to the success of the young can activate the societal benefits and further enhance health at older ages. Creating a new vision for the opportunities of an older age is the first critical step toward experiencing the benefits of our longer lives and creating a sustained third demographic dividend. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail:

  10. Creating New Features – Case: ARMA3 SQF Syntax Scripting


    Alamäki, Arto


    Currently, the game ARMA 3 is lacking in features in some areas and to battle this, community members have created scripts to solve these problems. One of these problems is the lack of Active Protection System on tanks, which can be found in their real life counterparts. The script which tried to improve this situation, was the Bakerman Armour Improvement System. However, even this script is lacking in some basic features. This thesis seeks to extend the Bakerman Armour Improvement System scr...

  11. Creating strategic brand management manual : Case: Tukikallio Oy


    Vepsäläinen, Sini


    The purpose of this Thesis was to create a Strategic Brand Management Manual for the use of a new company called Tukikallio Oy. The manual was composed of the elements that the company wanted to include in it. A qualitative research method was used in collecting information. The theoretical part of the thesis includes theories about brand building. Brand identity tells what the brand really is with its positive and negative sides, image reflects on what kind of things the consumer associa...

  12. Creating mechanisms of toxic substances emission of combustion engines


    Jankowski Antoni; Kowalski Mirosław


    The paper analyses the mechanisms of creation of toxic exhaust gases, which mainly derived from inexact fuel metering and improper air-fuel mixture preparation. The paper describes the process of creating toxic components in the exhaust gases of piston engines during engine operation, and impact on the emission of these components determining the composition of the fuel mixture determined equivalence factor Φ. The principal mechanisms of formation of toxic exhaust gases, in particular nitroge...

  13. Nanosystems in Ceramic Oxides Created by Means of Ion Implantation


    Van Huis, M.A.


    The material properties of nanometer-sized clusters are dependent on the cluster size. Changing the cluster dimensions induces structural phase transformations, metal-insulator transitions, non-linear optical properties and widening of the band gap of semiconductors. In this work, nanoclusters are created by ion implantation followed by thermal annealing. The ceramic oxides MgO and Al2O3 are used as embedding materials because of their stability and optical transparency. All clusters were cre...

  14. Characterization of Particles Created By Laser-Driven Hydrothermal Processing (United States)


    study for two reasons: (i) Both materials are compositionally high in SiO2 and (ii) form similarly to glass formed by a nuclear explosion, which...creates massive pressures and temperatures. As an example, trinitite is a glass formed by a post-nuclear event with SiO2 making up 50%-75% of its...processing, characterization, obsidian, tektite, natural glass 15. NUMBER OF PAGES 89 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT

  15. Social Entrepreneurship : Creating new business models to serve the poor


    Mair, Johanna (Prof.); Seelos, Christian


    The term “social entrepreneurship” (SE) is used to refer to the rapidly growing number of organizations that have created models for efficiently catering to basic human needs that existing markets and institutions have failed to satisfy. Social entrepreneurship combines the resourcefulness of traditional entrepreneurship with a mission to change society. One social entrepreneur, Ibrahim Abouleish, recently received the “Alternative Nobel Prize” for his Sekem initiative; in 2004, e-Bay founder...



    Koleva, Hristina


    The purpose of this thesis was to create new, more successful marketing strategy for case company Adventure Net through analyzing the current marketing strategy and market environment of the company. The tools included in the theoretical part were used to analyze the market environment and marketing strategy. The analyzing tools included were PESTEL (Political, Economic, Social, Technological, Ecologic, Legal) analysis, SWOT (Strengths, Weaknesses, Threats, Opportunities) analysis and com...

  17. What topology could be the Universe created with?

    International Nuclear Information System (INIS)

    Gurzadyan, V.G.; Kocharyan, A.A.


    In the framework of Hawking quantum cosmology the topological and geometrical properties of a created Universe with cosmological constant are considered. Probabilities for the Universe creation with different topologies (including torus, sphere, hyperbolic space) are calculated. These topologies turned out to be equally probable for the case of inflationary Universe. For the considered model the probability for the quantum change of topology during the Universe evolution is calculated

  18. Spatial Computing in Synthetic Bioware: Creating Bacterial Architectures


    Pascalie , Jonathan; Potier , Martin; Kowaliw , Taras; Giavitto , Jean-Louis; Michel , Olivier; Spicher , Antoine; Doursat , René


    International audience; Synthetic biology is an emerging scientific field that promotes the standardized manufacturing of biological components without natural equivalents. Its goal is to create artificial living systems that can meet various needs in health care, nanotechnology and energy. Most works are currently focused on the individual bacterium as a chemical reactor. Our project, SynBioTIC, addresses a novel and more complex challenge: shape engineering, i.e. the redesign of natural mor...

  19. Creating metadata that work for digital libraries and Google


    Dawson, Alan


    For many years metadata has been recognised as a significant component of the digital information environment. Substantial work has gone into creating complex metadata schemes for describing digital content. Yet increasingly Web search engines, and Google in particular, are the primary means of discovering and selecting digital resources, although they make little use of metadata. This article considers how digital libraries can gain more value from their metadata by adapting it for Google us...

  20. Pulsar Wind Nebulae Created by Fast-Moving Pulsars


    Kargaltsev, Oleg; Pavlov, George G.; Klingler, Noel; Rangelov, Blagoy


    We review multiwavelength properties of pulsar wind nebulae (PWNe) created by supersonically moving pulsars and the effects of pulsar motion on the PWN morphologies and the ambient medium. Supersonic pulsar wind nebulae (SPWNe) are characterized by bow-shaped shocks around the pulsar and/or cometary tails filled with the shocked pulsar wind. In the past several years significant advances in SPWN studies have been made in deep observations with the Chandra and XMM-Newton X-ray Observatories as...

  1. Directed Motivational Currents: Using vision to create effective motivational pathways


    Christine Muir; Zoltán Dörnyei


    Vision, that is, the mental representation of the sensory experience of a future goal state (involving imagination and imagery), is currently at the forefront of motivational innovation, and in recent years it has been seen increasingly more often in the motivational tool kit of practicing language teachers. Theories such as Dörnyei’s L2 motivational self system have explored the power that creating effective visions can harness (see, e.g., Dörnyei & Kubanyiova, 2014) and when viewed in conju...

  2. COCOA Code for Creating Mock Observations of Star Cluster Models


    Askar, Abbas; Giersz, Mirek; Pych, Wojciech; Dalessandro, Emanuele


    We introduce and present results from the COCOA (Cluster simulatiOn Comparison with ObservAtions) code that has been developed to create idealized mock photometric observations using results from numerical simulations of star cluster evolution. COCOA is able to present the output of realistic numerical simulations of star clusters carried out using Monte Carlo or \\textit{N}-body codes in a way that is useful for direct comparison with photometric observations. In this paper, we describe the C...

  3. Estonian Leader's Freedom Call Creates Storm / Anna Smolchenko

    Index Scriptorium Estoniae

    Smolchenko, Anna


    President Toomas Hendrik Ilvese esinemisest soome-ugri rahvaste maailmakongressil Hantõ-Mansiiskis, kohtumisest Venemaa presidendi Dmitri Medvedeviga, Eesti delegatsiooni saalist väljamarssimisest Venemaa riigiduuma väliskomisjoni esimehe Konstantin Kossatshovi sõnavõtu ajal. Ilmunud ka: St. Petersburg Times 1. juuli 2008, pealk.: Estonian Leader's Freedom Call Creates Controversy (lüh.). Vabariigi President töövisiidil Venemaal 27.-30.06.2008

  4. Spreadable media: Creating value and meaning in a networked culture

    Directory of Open Access Journals (Sweden)

    Moderated by Louisa Stein


    Full Text Available Online Roundtable on Spreadable Media, by Henry Jenkins, Sam Ford, and Joshua Green, with participants Paul Booth, Kristina Busse, Melissa Click, Sam Ford, Henry Jenkins, Xiaochang Li, and Sharon Ross. Section 1 first published as the article "Spreadable Media: Creating Value and Meaning in a Networked Culture", by Louisa Stein, from Cinema Journal Volume 53 Issue 3, pp152-177. Copyright 2014 by The University of Texas Press. All rights reserved.

  5. Project Conception as Part of Co-Creating Value

    DEFF Research Database (Denmark)

    Kampf, Constance Elizabeth


    -stakeholder interactions, project conception practices, and CSR activities. Based on shifts in understanding the nature of CSR, the paper then proposes a blueprint for operationalizing co-created value in the core business processes of corporations, supported by two conceptual tools for project conception—the Problem......-Solution-Outcome stakeholder analysis, and alignment between organizational strategy, community problem solving and the initial project idea....

  6. Creating photorealistic virtual model with polarization-based vision system (United States)

    Shibata, Takushi; Takahashi, Toru; Miyazaki, Daisuke; Sato, Yoichi; Ikeuchi, Katsushi


    Recently, 3D models are used in many fields such as education, medical services, entertainment, art, digital archive, etc., because of the progress of computational time and demand for creating photorealistic virtual model is increasing for higher reality. In computer vision field, a number of techniques have been developed for creating the virtual model by observing the real object in computer vision field. In this paper, we propose the method for creating photorealistic virtual model by using laser range sensor and polarization based image capture system. We capture the range and color images of the object which is rotated on the rotary table. By using the reconstructed object shape and sequence of color images of the object, parameter of a reflection model are estimated in a robust manner. As a result, then, we can make photorealistic 3D model in consideration of surface reflection. The key point of the proposed method is that, first, the diffuse and specular reflection components are separated from the color image sequence, and then, reflectance parameters of each reflection component are estimated separately. In separation of reflection components, we use polarization filter. This approach enables estimation of reflectance properties of real objects whose surfaces show specularity as well as diffusely reflected lights. The recovered object shape and reflectance properties are then used for synthesizing object images with realistic shading effects under arbitrary illumination conditions.

  7. CMS Create #2 | 3-4 October | Register now!

    CERN Multimedia


    CMS Create brings together CERN members and students from IPAC Design Genève (see here). The goal is to build a prototype exhibit illustrating what CMS does and how it does it. The exhibit will introduce the world of a particle physics detector to the general public, and to younger visitors in particular.    CMS Create, hosted by IdeaSquare, was first held in November 2015. There were 4 highly diverse teams made of participants from many educational backgrounds and from 15 nationalities. 36% of these were women; a figure we hope will grow this year. The 25 participants were CMS physicists, computer scientists, engineers, other CMS collaborators and IPAC students. The 2015 winning exhibit is now permanently installed in the visitor reception centre at CMS Point 5, which was visited by 20.600 visitors during 2015. Are you creative and motivated to share your ideas?  Take part in CMS Create #2, meet with scientists and designers from all over the world and explain to CER...

  8. Problems of quantum electrodynamics with external field creating pairs

    International Nuclear Information System (INIS)

    Fradkin, E.S.; Gitman, D.M.


    This paper is a preliminary version of a review of the results obtained by the authors and their collaborators which mainly concern problems of quantum electrodynamics with the pair-creating external field. In this paper the Furry picture is constructed for quantum electrodynamics with the pair-creating external field. It is shown, that various Green functions in the external field arise in the theory in a natural way. Special features of usage of the unitarity conditions for calculating the total probabilities of transitions are discussed. Perturbation theory for determining the mean electromagnetic field is constructed. Effective Lagrangians for pair-creating fields are built. One of the possible ways to introduce external field in quantum electrodynamics is considered. All the Green functions arising in the theory suggested are calculated for a constant field and a plane wave field. For the case of the electric field the total probability of creation of pairs from the vacuum accompanied by the photon irradiation and the total probability of transition from a single-electron state accompanied by the photon irradiation and creation of pairs are obtained by using the formulated rules for calculating the total probabilities of transitions. (author)

  9. Creating Healthier, More Equitable Communities By Improving Governance And Policy. (United States)

    Dubowitz, Tamara; Orleans, Tracy; Nelson, Christopher; May, Linnea Warren; Sloan, Jennifer C; Chandra, Anita


    How can healthier, more equitable communities be created? This is a key question for public health. Even though progress has been made in understanding the impact of social, physical, and policy factors on population health, there is much room for improvement. With this in mind, the Robert Wood Johnson Foundation made creating healthier, more equitable communities the third of four Action Areas in its Culture of Health Action Framework. This Action Area focuses on the interplay of three drivers-the physical environment, social and economic conditions, and policy and governance-in influencing health equity. In this article we review some of the policy and governance challenges confronting decisionmakers as they seek to create healthy communities on a broad scale. We use these challenges as a framework for understanding where the most critical gaps still exist, where the links could be exploited more effectively, and where there are opportunities for further research and policy development. Project HOPE—The People-to-People Health Foundation, Inc.

  10. Early Mandarin Literacy in a Class-created Reading Library

    Directory of Open Access Journals (Sweden)

    Reed Riggs


    Full Text Available This article explores methods for creating an extensive reading (ER library during the first weeks of language instruction, illustrated here in a college Mandarin course. Data include student-created texts, video transcripts of students reading in groups, field notes, and a student perceptions survey. Taken together the data provide a snapshot of how students in a beginning-level university Mandarin course can utilize Internet resources to create and use a personalized ER library. ER has been shown in previous research to enrich known words (Waring & Takaki, 2003, and provide opportunities for early literacy in languages that use nonalphabetic scripts like Japanese (Hitosugi & Day, 2004. Mandarin texts feature Chinese characters, which exhibit a low reliability in sound-meaning-visual associations, effectively blocking learners from sounding out unfamiliar words and clearly identifying meaning (Everson et al., 2016. The data here show how learners were able to connect prior knowledge from their own culture to new communicative situations in the form of printed comic books to read in class in small groups. Learners were found to connect understandings between their own culture and the target culture, focusing particularly on cultural similarities.

  11. Decolonizing Engagement? Creating a Sense of Community through Collaborative Filmmaking

    Directory of Open Access Journals (Sweden)

    Sarah Marie Wiebe


    Full Text Available The visual medium has the potential to be a creative avenue for enhancing  awareness, critical thought and social justice. Through the prism of collaborative filmmaking, academic-activists can enrich textual analyses while creating what Jacques Rancière calls a “sense of community” among participants. This article reflects on the process of co-producing an Indigenous youth-driven documentary film, Indian Givers, which is publicly available on YouTube. It discusses the applied practice of engaging in a collaborative process with the aim of countering Western models of knowledge. The film and this article each draw into focus the experiences and stories of Indigenous youth who live in a highly polluted place commonly referred to as Canada’s “Chemical Valley.” Informed by Chantal Mouffe’s notion of agonism, I contend that collaborative filmmaking contributes to anti-oppressive and community engaged scholarship by facilitating intercultural dialogue, offering a reflexive and relational approach to research, co-creating knowledge and contributing to social action. This paper reflects on some of the challenges of collaborative filmmaking in order to contribute to academic-activist research. As an anti-oppressive research tool, collaborative filmmaking provides a forum for resistance to dominant colonial discourses while creating space for radical difference in pursuit of decolonization.

  12. Authentic leaders creating healthy work environments for nursing practice. (United States)

    Shirey, Maria R


    Implementation of authentic leadership can affect not only the nursing workforce and the profession but the healthcare delivery system and society as a whole. Creating a healthy work environment for nursing practice is crucial to maintain an adequate nursing workforce; the stressful nature of the profession often leads to burnout, disability, and high absenteeism and ultimately contributes to the escalating shortage of nurses. Leaders play a pivotal role in retention of nurses by shaping the healthcare practice environment to produce quality outcomes for staff nurses and patients. Few guidelines are available, however, for creating and sustaining the critical elements of a healthy work environment. In 2005, the American Association of Critical-Care Nurses released a landmark publication specifying 6 standards (skilled communication, true collaboration, effective decision making, appropriate staffing, meaningful recognition, and authentic leadership) necessary to establish and sustain healthy work environments in healthcare. Authentic leadership was described as the "glue" needed to hold together a healthy work environment. Now, the roles and relationships of authentic leaders in the healthy work environment are clarified as follows: An expanded definition of authentic leadership and its attributes (eg, genuineness, trustworthiness, reliability, compassion, and believability) is presented. Mechanisms by which authentic leaders can create healthy work environments for practice (eg, engaging employees in the work environment to promote positive behaviors) are described. A practical guide on how to become an authentic leader is advanced. A research agenda to advance the study of authentic leadership in nursing practice through collaboration between nursing and business is proposed.

  13. GCL – An Easy Way for Creating Graphical User Interfaces

    Directory of Open Access Journals (Sweden)

    Mariusz Trzaska


    Full Text Available Graphical User Interfaces (GUI can be created using several approaches. Beside using visual editors or a manually written source code, it is possible to employ a declarative method. Such a solution usually allows working on a higher abstraction level which saves the developers' time and reduces errors. The approach can follow many ideas. One of them is based on utilizing a Domain Specific Language (DSL. In this paper we present the results of our research concerning a DSL language called GCL (GUI Creating Language. The prototype is implemented as a library for Java with an API emulating the syntax and semantics of a DSL language. A programmer, using a few keywords, is able to create different types of GUIs, including forms, panels, dialogs, etc. The widgets of the GUI are built automatically during the run-time phase based on a given data instance (an ordinary Java object and optionally are to be customized by the programmer. The main contribution of our work is delivering a working library for a popular platform. The library could be easily ported for other programming languages such the MS C#.

  14. Use of created cattail ( Typha) wetlands in mitigation strategies (United States)

    Dobberteen, Ross A.; Nickerson, Norton H.


    In order to balance pressures for land-use development with protection of wetland resources, artificial wetlands have been constructed in an effort to replace lost ecosystems. Despite its regulatory appeal and prominent role in current mitigation strategies, it is unclear whether or not created systems actually compensate for lost wetland resources. Mitigation predictions that rely on artificial wetlands must be analyzed critically in terms of their efficacy. Destruction of wetlands due to burial by coal fly ash at a municipal landfill in Danvers, Massachusetts, USA, provided an opportunity to compare resulting growth of created cattail ( Typha) marshes with natural wetland areas. Once the appropriate cattail species was identified for growth under disturbed landfill conditions, two types of artificial wetlands were constructed. The two systems differed in their hydrologic attributes: while one had a surface water flow characteristic of most cattail wetlands, the second system mimicked soil and water conditions found in naturally occurring floating cattail marshes. Comparison of plant growth measurements for two years from the artificial systems with published values for natural cattail marshes revealed similar structure and growth patterns. Experiments are now in progress to investigate the ability of created cattail marshes to remove and accumulate heavy metals from polluted landfill leachate. Research of the type reported here must be pursued aggressively in order to document the performance of artificial wetlands in terms of plant structure and wetland functions. Such research should allow us to start to evaluate whether artificial systems actually compensate for lost wetlands by performing similar functions and providing the concomitant public benefits.

  15. Creating organizational value by leveraging the multihospital pharmacy enterprise. (United States)

    Schenkat, Dan; Rough, Steve; Hansen, Amanda; Chen, David; Knoer, Scott


    The results of a survey of multihospital pharmacy leaders are summarized, and a road map for creating organizational value with the pharmacy enterprise is presented. A survey was designed to evaluate the level of integration of pharmacy services across each system's multiple hospitals, determine the most commonly integrated services, determine whether value was quantified when services were integrated, collect common barriers for finding value through integration, and identify strategies for successfully overcoming these barriers. The comprehensive, 59-question survey was distributed electronically in September 2016 to the top pharmacy executive at approximately 160 multihospital systems located throughout the United States. Survey respondents indicated that health systems are taking a wide range of approaches to integrating services systemwide. Several themes emerged from the survey responses: (1) having a system-level pharmacy leader with solid-line reporting across the enterprise increased the likelihood of integrating pharmacy services effectively, (2) integration of pharmacy services across a multihospital system was unlikely to decrease the number of pharmacy full-time equivalents within the enterprise, and (3) significant opportunities exist for creating value for the multihospital health system with the pharmacy enterprise, particularly within 4 core areas: system-level drug formulary and clinical standardization initiatives, supply chain initiatives, electronic health record integration, and specialty and retail pharmacy services. Consistently demonstrating strong organizational leadership, entrepreneurialism, and the ability to create value for the organization will lead to the system-level pharmacy leader and the pharmacy enterprise being well-positioned to achieve positive outcomes for patients, payers, and the broader health system. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  16. Creating Intangible Value through a Corporate Employee Portal

    Directory of Open Access Journals (Sweden)

    David Mendes


    Full Text Available Organizations create competitive advantage by creating more economic value than their rivals. Increasing business competition and information technology development have both led to huge corporate organizational changes and have raised the importance of intangible assets along the value chain. Value creation and the success of organizations increasingly depends on the leverage of knowledge available internally, as nowadays it has become essential to understand employee portals’ business value and to build adequate change management programmes. The Balanced Scorecard (BSC and Strategy Map (SM show an organization’s objectives, how they are achieved, and the link between the goals of the various sub-units and how these act together to produce the overall results. BSC and SM clarify how intangible assets are aligned with strategy, to create value for the organization. However, the concerns related to change management seem not to have been properly addressed. To conveniently deal with these matters, the authors propose a framework to map the cause-effect relationships that generates business value, as well as provides top management and decision makers with the information needed for a suitable top-down commitment and sponsorship, which is essential to bring about the appropriate change management and benefits’ realization. SM and Benefits Dependency Network (BDN were combined, resulting in a suitable framework to help organizations enhance their knowledge, mitigating the risk of investment failure or misuse, and a timely contribution to capture more value from investments in intangible assets. The developed framework helps organizations address their concerns related to value creation and change management, and it has been applied to this Employee Portal case study. This case study allows us to conclude that, although the promotion of organizational culture and corporate alignment are not usually frequent goals of organizations, and do not

  17. Creating a new investment pool for innovative health systems research. (United States)

    Laba, Tracey-Lea; Patel, Anushka; Jan, Stephen


    Recent trends in health research funding towards 'safe bets' is discouraging investment into the development of health systems interventions and choking off a vital area of policy-relevant research. This paper argues that to encourage investment into innovative and perceivably riskier health systems research, researchers need to create more attractive business cases by exploring alternative approaches to the design and evaluation of health system interventions. At the same time, the creation of dedicated funding opportunities to support this work, as well as for relevant early career researchers, is needed.

  18. Create a good learning environment and motivate active learning enthusiasm (United States)

    Bi, Weihong; Fu, Guangwei; Fu, Xinghu; Zhang, Baojun; Liu, Qiang; Jin, Wa


    In view of the current poor learning initiative of undergraduates, the idea of creating a good learning environment and motivating active learning enthusiasm is proposed. In practice, the professional tutor is allocated and professional introduction course is opened for college freshman. It can promote communication between the professional teachers and students as early as possible, and guide students to know and devote the professional knowledge by the preconceived form. Practice results show that these solutions can improve the students interest in learning initiative, so that the active learning and self-learning has become a habit in the classroom.

  19. Creating texts an introduction to the study of composition

    CERN Document Server

    Nash, Walter


    Creating Texts emphasises a practical approach to composition and enables students to understand what is involved in the creation of a text and to learn from the practice of other writers. Extensively rewritten and updated from Walter Nash's earlier volume, Designs in Prose, attention is paid to the general theory of composition, in both traditional and original terms, so that students are made familiar with the basic resources of composition, in grammar and in the lexicon.The essence of every chapter is the discussion of examples of text, sometimes devised by the authors

  20. Methodology Used to Create System Architecture for its in Slovakia

    Directory of Open Access Journals (Sweden)

    Ales Janota


    Full Text Available The paper deals with an object oriented approach proposed by the authors for creation of the ITS system architecture in the Slovak Republic and shows how a reference architecture can be created as s base for future more detailed architectures (models. The authors characterise possible approaches, explain their relations to existing architectures and propose a methodology based on the Unifield Modelling language (UML. The main attention is paid to the logical part (logical view of the system architecture, that should result in the form of easy readable and understandable UML models.

  1. Managerial strategies for creating an effective work environment. (United States)

    Luse, Kimberly A


    To create a highly functioning medical imaging team, radiology managers must be able to analyze their departments and identify areas for improvement. This type of analysis means assessing front-line personnel who already work in the department, along with identifying staffing needs and recruiting talented new employees. In addition, managers must develop effective retention tools such as career ladders and mentorship programs to improve the overall working environment. This article discusses a variety of different strategies to help managers develop a more effective department.

  2. Co-creating value: Through the gate and beyond


    Parry, G.; Green, E.


    Under the government’s “Transforming Rehabilitation – A Strategy for Reform” the work of the probation service moves into private organisational hands with the aim of providing more scope for innovation. This project asks not what service can be provided; rather, what value and services can ex-offenders offer and create themselves? The project draws on the salutogenic model of the relationship between humans and coping to examine how ex-offenders achieve better outcomes through use of their o...

  3. License - CREATE portal | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us CREATE portal License License to Use This Database Last updated : 2016/03/16 You may use this database... the license terms regarding the use of this database and the requirements you must follow in using this database.... The license for this database is specified in the Creative Commons Attribu...tion-Share Alike 4.0 International . If you use data from this database, please be sure attribute this database...hare Alike 4.0 International is found here . With regard to this database, you are licensed to: freely acces

  4. Applying automatic item generation to create cohesive physics testlets (United States)

    Mindyarto, B. N.; Nugroho, S. E.; Linuwih, S.


    Computer-based testing has created the demand for large numbers of items. This paper discusses the production of cohesive physics testlets using an automatic item generation concepts and procedures. The testlets were composed by restructuring physics problems to reveal deeper understanding of the underlying physical concepts by inserting a qualitative question and its scientific reasoning question. A template-based testlet generator was used to generate the testlet variants. Using this methodology, 1248 testlet variants were effectively generated from 25 testlet templates. Some issues related to the effective application of the generated physics testlets in practical assessments were discussed.

  5. Study of PIN diode energy traps created by neutrons

    International Nuclear Information System (INIS)

    Sopko, V; Dammer, J; Sopko, B; Chren, D


    Characterization of radiation defects is still ongoing and finds greater application in the increasing radiation doses on semiconductor detectors in experiments. Studying the changes of silicon PIN diode for high doses of radiation is the fundamental motivation for our measurements. In this article we describe the behavior of the PIN diode and development of the disorder caused by neutrons from a 252Cf and doses up to 8 Gy. The calibration curve for PIN diode shows the effect of disorders as the changes of the voltampere characteristics depending on the dose of neutron irradiation. The measured values for defects are in good agreement with created energy traps.

  6. Creating an Event: Case “Spring Festival” in Imatra


    Serous, Alina


    The purpose of the project was to create a new event in Imatra, Finland, and to see how theoretical approach to event management is applied in practice. The event was designed to be public non-profit event for local families. The work was carried out in co-operation with Imitsi, the local association of town businesses, which aims at improving business environment and developing the town centre of Imatra to be a lively place. Theoretical background for the project was gathered using variou...

  7. Creating a nursing strategic planning framework based on evidence. (United States)

    Shoemaker, Lorie K; Fischer, Brenda


    This article describes an evidence-informed strategic planning process and framework used by a Magnet-recognized public health system in California. This article includes (1) an overview of the organization and its strategic planning process, (2) the structure created within nursing for collaborative strategic planning and decision making, (3) the strategic planning framework developed based on the organization's balanced scorecard domains and the new Magnet model, and (4) the process undertaken to develop the nursing strategic priorities. Outcomes associated with the structure, process, and key initiatives are discussed throughout the article. Copyright © 2011 Elsevier Inc. All rights reserved.

  8. Creating technical heritage object replicas in a virtual environment (United States)

    Egorova, Olga; Shcherbinin, Dmitry


    The paper presents innovative informatics methods for creating virtual technical heritage replicas, which are of significant scientific and practical importance not only to researchers but to the public in general. By performing 3D modeling and animation of aircrafts, spaceships, architectural-engineering buildings, and other technical objects, the process of learning is achieved while promoting the preservation of the replicas for future generations. Modern approaches based on the wide usage of computer technologies attract a greater number of young people to explore the history of science and technology and renew their interest in the field of mechanical engineering.

  9. Creating a Learning Culture for Medical Consortia in China. (United States)

    He, Guozhong; Chen, Zimin

    In China's recent health care reforms, both individuals and organizations have shown an ever-growing desire and demand for new knowledge and skills. A health care delivery system (HCDS) should explore new ways for creating a learning organization (LO) and should organically combine HCDS culture construction with the LO construction to build a cultural atmosphere that is conducive to the development of the LO. This article describes the implementation phase, characteristics, and realization strategy of an HCDS construction for the ultimate purpose of enhancing HCDS cohesion, solidarity, and sustainable development.

  10. Creating the Perfect Umbilicus: A Systematic Review of Recent Literature. (United States)

    Joseph, Walter J; Sinno, Sammy; Brownstone, Nicholas D; Mirrer, Joshua; Thanik, Vishal D


    The aim of this study was to perform an updated systematic review of the literature over the last 10 years, analyzing and comparing the many published techniques with the hope of providing plastic surgeons with a new standard in creating the perfect umbilicus in the setting of both abdominoplasty and abdominally based free-flap breast reconstruction. An initial search using the PubMed online database with the keyword "umbilicoplasty" was performed. These results were filtered to only include articles published within the last 10 years. The remaining articles were thoroughly reviewed by the authors and only those pertaining to techniques for umbilicoplasty in the setting of abdominoplasty and abdominally based free flap were included. Of the 10 unique techniques yielded by our search, 9/10 (90 %) initially incised the native umbilicus with a round, oval, or vertical ellipse pattern. Of the 9 techniques that initially perform a round incision, 4 of them (44.4 %) later modify the round umbilicus with either an inferior or superior excision to create either a "U"- or "inverted U"-shaped umbilicus. In terms of the shape of the incision made in the abdominal flap for umbilical reinsertion, the most common were either a round incision or an inverted "V" or "U," both of which accounted for 4/10 (40 %) and 3/10 (30 %), respectively. Almost all of the studies (8/10; 80 %) describe "defatting" or trimming of the subcutaneous adipose tissue around the incision to create a periumbilical concavity following inset of the umbilicus. 4/10 (40 %) of the techniques describe suturing the dermis of the umbilical skin to rectus fascia. Furthermore, 3/10 (30 %) advise that stalk plication is a necessary step to their technique. 7/9 techniques (77.8 %) preferred nondissolvable sutures for skin closure, with nylon being the most common suture material used. Only 2/9 (22.2 %) used dissolvable sutures. Although future studies are necessary, it is our hope that this systematic

  11. Pollicisation: The Myth about Creating a Pseudo-Trapezium. (United States)

    Mennen, Ulrich


    We have performed 14 pollicisations without creating a "pseudo-trapezium" from the metacarpal head. The entire metacarpal of the intended finger to be pollicised is removed and the proximal phalanx of the finger is inserted into the space left by the base of the excised metacarpal. The results are good to excellent in all 14 cases followed for 2-9 years. The advantages are that the operation is much simpler, thus also much quicker. The new thumb looks more like a thumb (not too long) and is more stable (ball-and-socket joint), with no long term complications often seen with the pseudo-trapezium.

  12. Professional penetration testing creating and operating a formal hacking lab

    CERN Document Server

    Wilhelm, Thomas


    PART I - Setting Up. Chapter 1: Introduction. Chapter 2: Ethics and Hacking. Chapter 3: Hacking as a Career. Chapter 4: Setting up Your Lab. Chapter 5: Creating and Using PenTest Targets in Your Lab. Chapter 6: Methodologies. Chapter 7: PenTest Metrics. Chapter 8: Management of a PenTest. PART II - Running a PenTest. Chapter 9: Information Gathering. Chapter 10: Vulnerability Identification. Chapter 11: Vulnerability Verification. Chapter 12: Compromising a System and Privilege Escalation. Chapter 13: Maintaining Access. Chapter 14: Covering Your Tracks. PART III - Wrapping Everything Up. Chap

  13. Nuclear architecture and landscape: the power plant creates the site

    International Nuclear Information System (INIS)

    Parent, Claude; Bouvier, Yves


    The implementation, from 1974, of the French nuclear programme, was associated with an 'Architecture Plan' requested by Michel Hug, Equipment Manager at power utility EDF. The objective was to create an architecture language specific to nuclear power. Far from trying to hide the nuclear power stations, the nuclear architecture college conversely designed one set of ambitious and powerful shapes. Systematically associated to one landscape and to one colourist, the architect sought to use in the best possible way the potentialities available on one site. The power station should not blend in with the landscape, but on the contrary, participate in the creation of a fresh landscape

  14. Creating transient cell membrane pores using a standard inkjet printer. (United States)

    Owczarczak, Alexander B; Shuford, Stephen O; Wood, Scott T; Deitch, Sandra; Dean, Delphine


    Bioprinting has a wide range of applications and significance, including tissue engineering, direct cell application therapies, and biosensor microfabrication. Recently, thermal inkjet printing has also been used for gene transfection. The thermal inkjet printing process was shown to temporarily disrupt the cell membranes without affecting cell viability. The transient pores in the membrane can be used to introduce molecules, which would otherwise be too large to pass through the membrane, into the cell cytoplasm. The application being demonstrated here is the use of thermal inkjet printing for the incorporation of fluorescently labeled g-actin monomers into cells. The advantage of using thermal ink-jet printing to inject molecules into cells is that the technique is relatively benign to cells. Cell viability after printing has been shown to be similar to standard cell plating methods. In addition, inkjet printing can process thousands of cells in minutes, which is much faster than manual microinjection. The pores created by printing have been shown to close within about two hours. However, there is a limit to the size of the pore created (~10 nm) with this printing technique, which limits the technique to injecting cells with small proteins and/or particles. A standard HP DeskJet 500 printer was modified to allow for cell printing. The cover of the printer was removed and the paper feed mechanism was bypassed using a mechanical lever. A stage was created to allow for placement of microscope slides and coverslips directly under the print head. Ink cartridges were opened, the ink was removed and they were cleaned prior to use with cells. The printing pattern was created using standard drawing software, which then controlled the printer through a simple print command. 3T3 fibroblasts were grown to confluence, trypsinized, and then resuspended into phosphate buffered saline with soluble fluorescently labeled g-actin monomers. The cell suspension was pipetted into the

  15. Create dynamic charts in Microsoft Office Excel 2007 and beyond

    CERN Document Server

    Scheck, Reinhold


    Extend your Excel 2007 skills-and create more-powerful and compelling charts in less time. Guided by an Excel expert, you'll learn how to turn flat, static charts into dynamic solutions-where you can visualize and manipulate data countless ways with a simple mouse click. Get the hands-on practice and examples you need to produce your own, professional-quality results. No programming required! Maximize the impact of your ideas and data! Learn how your design decisions affect perception and comprehensionMatch the right chart type to your communication objectiveVisualize-then build-your solut

  16. Creating comics in physics lessons: an educational practice (United States)

    Albrecht, Evonir; Voelzke, Marcos Rincon


    This article presents the results from an intervention program with 119 students during physics and astronomy lessons. This program has taken place in the public school "Colônia dos Pescadores" in the City of Caraguatatuba, State of São Paulo. The goal is to show the importance and possibility of learning with support materials, either in the classroom or at home,created by the learners themselves. The results show that students can demonstrate their creativity while building up their own knowledge related to Astronomy as they are able to produce comic strips about the theme afterwards.

  17. Creating virtual humans for simulation-based training and planning

    Energy Technology Data Exchange (ETDEWEB)

    Stansfield, S.; Sobel, A.


    Sandia National Laboratories has developed a distributed, high fidelity simulation system for training and planning small team Operations. The system provides an immersive environment populated by virtual objects and humans capable of displaying complex behaviors. The work has focused on developing the behaviors required to carry out complex tasks and decision making under stress. Central to this work are techniques for creating behaviors for virtual humans and for dynamically assigning behaviors to CGF to allow scenarios without fixed outcomes. Two prototype systems have been developed that illustrate these capabilities: MediSim, a trainer for battlefield medics and VRaptor, a system for planning, rehearsing and training assault operations.

  18. A methodology for creating ontologies for engineering design

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Kim, S.; Wallace, K.M.


    This paper describes a six-stage methodology for developing ontologies for engineering design, together with the research methods and evaluation of each stage. The methodology focuses upon understanding a user's domain models through empirical research. A case study of an ontology for searching......, indexing, and retrieving engineering knowledge is described. The root concepts of the ontology were elicited from engineering designers. Relationships between concepts are extracted as the ontology is populated. The contribution of this research is a methodology to allow researchers. and industry to create...... ontologies for their particular purpose and a thesaurus for the terms within the ontology....

  19. Absorbing metasurface created by diffractionless disordered arrays of nanoantennas

    Energy Technology Data Exchange (ETDEWEB)

    Chevalier, Paul [Minao, ONERA, The French Aerospace Lab, 91761 Palaiseau (France); Minao, Laboratoire de Photonique et Nanostructures (LPN), CNRS, Université Paris-Saclay, Route de Nozay, 91460 Marcoussis (France); Bouchon, Patrick, E-mail:; Jaeck, Julien; Lauwick, Diane; Kattnig, Alain [Minao, ONERA, The French Aerospace Lab, 91761 Palaiseau (France); Bardou, Nathalie; Pardo, Fabrice [Minao, Laboratoire de Photonique et Nanostructures (LPN), CNRS, Université Paris-Saclay, Route de Nozay, 91460 Marcoussis (France); Haïdar, Riad [Minao, ONERA, The French Aerospace Lab, 91761 Palaiseau (France); École Polytechnique, Département de Physique, 91128 Palaiseau (France)


    We study disordered arrays of metal-insulator-metal nanoantenna in order to create a diffractionless metasurface able to absorb light in the 3–5 μm spectral range. This study is conducted with angle-resolved reflectivity measurements obtained with a Fourier transform infrared spectrometer. A first design is based on a perturbation of a periodic arrangement, leading to a significant reduction of the radiative losses. Then, a random assembly of nanoantennas is built following a Poisson-disk distribution of given density, in order to obtain a nearly perfect cluttered assembly with optical properties of a homogeneous material.

  20. Absorbing metasurface created by diffractionless disordered arrays of nanoantennas

    International Nuclear Information System (INIS)

    Chevalier, Paul; Bouchon, Patrick; Jaeck, Julien; Lauwick, Diane; Kattnig, Alain; Bardou, Nathalie; Pardo, Fabrice; Haïdar, Riad


    We study disordered arrays of metal-insulator-metal nanoantenna in order to create a diffractionless metasurface able to absorb light in the 3–5 μm spectral range. This study is conducted with angle-resolved reflectivity measurements obtained with a Fourier transform infrared spectrometer. A first design is based on a perturbation of a periodic arrangement, leading to a significant reduction of the radiative losses. Then, a random assembly of nanoantennas is built following a Poisson-disk distribution of given density, in order to obtain a nearly perfect cluttered assembly with optical properties of a homogeneous material

  1. Creating integrated information management system for small and medium business

    Directory of Open Access Journals (Sweden)

    Deinega Valentina Nikolaevna


    Full Text Available Enterprises regardless of their size and ownership, focused on a long and successful work needed to create a system of integrated information systems. This is dictated by the fact that, firstly, it combines the financial data, and secondly provides a standardized manufacturing processes, thirdly, solves the problem of standardization of information in a frame. The main thing in your decision-making - the definition of the strategy of the business and the reflection of this strategy on goals and objectives. ERP-system help to maintain competitiveness and leadership in the market.

  2. Creating a goaltending development manual for Belgium Ice Hockey


    Guay, Eddy


    The objective of the thesis and was to create a goalie development manual for the Royal Belgian Ice Hockey Federation (RBIHF). The manual will provide goalies and coaches a guide for developing players in the position. The manual aims to provide a technical resources for goalies and coaches on the skills that goalies need to focus on to allow them to improve their play. ! “The backbone of a hockey team”or “The most important position in sports” are two of many phrases that i...

  3. Creating energy security indexes with decision matrices and quantitative criteria

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, Larry; Shupe, Darren


    Energy security is becoming an important policy issue in a growing number of jurisdictions because of volatile energy markets and production challenges faced by many producers. As a result, policymakers and politicians are looking for tools or methods that can create an energy security index with results that are justifiable, understandable, and reproducible. This paper describes a method which employs a decision matrix to produce an energy security index using quantitative criteria and metrics. The method allows a range of indexes to be produced, thereby offering further insight into the state of a jurisdiction's energy security.

  4. Creating a global observatory for health R&D. (United States)

    Terry, Robert F; Salm, José F; Nannei, Claudia; Dye, Christopher


    A global map of health R&D activity would improve the coordination of research and help to match limited resources with public health priorities, such as combating antimicrobial resistance. The challenges of R&D mapping are large because there are few standards for research classification and governance and limited capacity to report on R&D data, especially in low-income countries. Nevertheless, based on developments in semantic classification, and with better reporting of funded research though the Internet, it is now becoming feasible to create a global observatory for health R&D. Copyright © 2014, American Association for the Advancement of Science.

  5. Creating Environments Through the Art of Occupational Therapy

    Directory of Open Access Journals (Sweden)

    Lydia Royeen


    Full Text Available Dr. Lori Reynolds has an interest in therapeutic gardens and the creation of living spaces that promote wellbeing for older adults. Dr. Reynolds educates various stakeholders on the benefits of occupational therapy, including landscape architects and senior living administrators. Her advocacy to expand occupational therapy beyond its mainstream roles is infectious. She speaks passionately about her work in helping to create therapeutic gardens and how her role as an occupational therapist offers great perspective in this process. She appreciates the environmental impact on an individual’s health and well-being and practices from a personenvironment-occupation theory

  6. Self-assembling layers created by membrane proteins on gold. (United States)

    Shah, D S; Thomas, M B; Phillips, S; Cisneros, D A; Le Brun, A P; Holt, S A; Lakey, J H


    Membrane systems are based on several types of organization. First, amphiphilic lipids are able to create monolayer and bilayer structures which may be flat, vesicular or micellar. Into these structures membrane proteins can be inserted which use the membrane to provide signals for lateral and orientational organization. Furthermore, the proteins are the product of highly specific self-assembly otherwise known as folding, which mostly places individual atoms at precise places in three dimensions. These structures all have dimensions in the nanoscale, except for the size of membrane planes which may extend for millimetres in large liposomes or centimetres on planar surfaces such as monolayers at the air/water interface. Membrane systems can be assembled on to surfaces to create supported bilayers and these have uses in biosensors and in electrical measurements using modified ion channels. The supported systems also allow for measurements using spectroscopy, surface plasmon resonance and atomic force microscopy. By combining the roles of lipids and proteins, highly ordered and specific structures can be self-assembled in aqueous solution at the nanoscale.

  7. Creating mechanisms of toxic substances emission of combustion engines

    Directory of Open Access Journals (Sweden)

    Jankowski Antoni


    Full Text Available The paper analyses the mechanisms of creation of toxic exhaust gases, which mainly derived from inexact fuel metering and improper air-fuel mixture preparation. The paper describes the process of creating toxic components in the exhaust gases of piston engines during engine operation, and impact on the emission of these components determining the composition of the fuel mixture determined equivalence factor Φ. The principal mechanisms of formation of toxic exhaust gases, in particular nitrogen oxides, carbon monoxide and hydrocarbons, and also essential according to create each of toxic exhaust gases are the subject of the paper. Moreover, empirical relationships, by means of which it is possible to determine the time of creation of the individual components of toxic exhaust gases, are presented. For example, one of the mechanisms for prompt formation of nitrogen oxides and hydrocarbons graphic illustration of formation as a function of crank angle is described. At the conclusion, the summary and significance of information on creation mechanisms of toxic components in the exhaust gases of piston engines are presented.

  8. The Creating Hope Act: what is old is new again

    Directory of Open Access Journals (Sweden)

    Tolbert JA


    Full Text Available Jaszianne A Tolbert,1,2 Jennifer L Goldman,2-4 Ralph E Kauffman,2,4 Susan M Abdel-Rahman2,41Division of Hematology/Oncology, 2Division of Clinical Pharmacology and Therapeutic Innovation, 3Division of Infectious Diseases, Children's Mercy Hospital, Kansas City, MO, USA; 4Department of Pediatrics, University of Missouri-Kansas City, School of Medicine, Kansas City, MO, USAAbstract: The Creating Hope Act, passed as part of the Food and Drug Administration Safety and Innovation Act of 2012, is among the newest laws intended to foster drug development for rare and neglected diseases in children. The act expands the priority review voucher incentive that first appeared in the Food and Drug Administration Amendments Act of 2007 and was intended to stimulate the development of products for the prevention and treatment of tropical diseases. Notably, legislative and regulatory initiatives aimed at enhancing drug development both for use in children and for rare diseases have intermittently emerged over the past 3 decades. This manuscript provides an overview of related legislation that has preceded the Creating Hope Act and examines the potential impact of the new act in the context of the outcomes that have been observed with the earlier initiatives.Keywords: orphan drug, rare disease, pediatric, drug development, priority review voucher


    Karam, George H


    The design of a new medical education building sought through art to create awareness of important values in physicians. An antique silk embroidery depicting Aesculapius crowning a man charged to protect the medical profession from quackery is placed at the beginning of the space leading into the simulation laboratories to highlight the importance of competency. A charcoal drawing by an important regional artist conveys the message that trust can arise from vulnerability, with optimal mentoring being the outcome. A round table with an authentic French Art Deco lantern and a commissioned table designed as an interpretation of the lantern create the sense of importance that fosters critical thinking and professionalism. An outdoor terrace was designed to challenge residents and medical students to become in touch with their capacity for humanism in medicine. Included among the various elements to nurture this core value are an outdoor classroom, conversation gardens, open spaces under plane trees (which are within the family of trees under which Hippocrates taught), and a reflection cove (reminiscent of those sought by poets who travelled to Ravello, Italy, in an attempt to find the meaning of life). The major focal point on the terrace is a commissioned Dale Chihuly sculpture of red reeds intended to encourage art as a form of healing and as a source of humanism.

  10. Creating pedagogical spaces for developing doctor professional identity. (United States)

    Clandinin, D Jean; Cave, Marie-Therese


    Working with doctors to develop their identities as technically skilled as well as caring, compassionate and ethical practitioners is a challenge in medical education. One way of resolving this derives from a narrative reflective practice approach to working with residents. We examine the use of such an approach. This paper draws on a 2006 study carried out with four family medicine residents into the potential of writing, sharing and inquiring into parallel charts in order to help develop doctor identity. Each resident wrote 10 parallel charts over 10 weeks. All residents met bi-weekly as a group with two researchers to narratively inquire into the stories told in their charts. One parallel chart and the ensuing group inquiry about the chart are described. In the narrative reflective practice process, one resident tells of working with a patient and, through writing, sharing and inquiry, integrates her practice and how she learned to be a doctor in one cultural setting into another cultural setting; another resident affirms her relational way of practising medicine, and a third resident begins to see the complexity of attending to patients' experiences. The process shows the importance of creating pedagogical spaces to allow doctors to tell and retell, through narrative inquiry, their stories of their experiences. This pedagogical approach creates spaces for doctors to individually develop their own stories by which to live as doctors through narrative reflection on their interwoven personal, professional and cultural stories as they are shaped by, and enacted within, their professional contexts.

  11. [Creating a reliable therapeutic relationship with the patient]. (United States)

    Matsuki, Kunihiro


    The factors necessary to create a reliable therapeutic relationship are presented in this paper. They include a demeanor and calmness of temperament as a psychiatric professional, a feeling of respect for the patient that is based on our common sense as human beings, an attitude of listening attentively to what the patient is revealing, maintaining an attitude of receptive neutrality, the ability to withstand the emotional burdens imposed on one by the patient, patience with any difficulty on one's own part to understand the patient, the ability to communicate clearly, including on the patient's negative aspects, and the ability to end psychiatric consultation sessions in a friendly and intimate manner. Creating a beneficial therapeutic relationship is about the building of a trusting relationship, in which the patient can constructively endure being questioned by us, or cope with the tough burdens we may place on them. However, a reliable relationship such as this contains paradoxes. Patients are able to talk to us about their suspicions, anxieties, dissatisfactions or anger only if the therapeutic relationship is good or based on trust. In other words, just like our patients, psychiatrists, too, must deal with what that the patient brings and directs toward us. It is at this point that what we call a true therapeutic relationship starts.

  12. Creating 3D visualizations of MRI data: A brief guide (United States)

    Madan, Christopher R.


    While magnetic resonance imaging (MRI) data is itself 3D, it is often difficult to adequately present the results papers and slides in 3D. As a result, findings of MRI studies are often presented in 2D instead. A solution is to create figures that include perspective and can convey 3D information; such figures can sometimes be produced by standard functional magnetic resonance imaging (fMRI) analysis packages and related specialty programs. However, many options cannot provide functionality such as visualizing activation clusters that are both cortical and subcortical (i.e., a 3D glass brain), the production of several statistical maps with an identical perspective in the 3D rendering, or animated renderings. Here I detail an approach for creating 3D visualizations of MRI data that satisfies all of these criteria. Though a 3D ‘glass brain’ rendering can sometimes be difficult to interpret, they are useful in showing a more overall representation of the results, whereas the traditional slices show a more local view. Combined, presenting both 2D and 3D representations of MR images can provide a more comprehensive view of the study’s findings. PMID:26594340

  13. Creating and purifying an observation instrument using the generalizability theory

    Directory of Open Access Journals (Sweden)

    Elena Rodríguez-Naveiras


    Full Text Available The control of quality of data it is one of the most relevant aspects in observational researches. The Generalizability Theory (GT provides a method of analysis that allows us to isolate the various sources of error measurement. At the same time, it helps us to determine the extent to which various factors can change and analyze the effect on the generalizability coefficient. In the work shown here, there are two studies aimed to creating and purifying an observation instrument, Observation Protocol in the Teaching Functions (Protocolo de Funciones Docentes, PROFUNDO, v1 and v2, for behavioral assessment which has been carried out by instructors in a social-affective out-of-school program. The reliability and homogeneity studies are carried out once the instrument has been created and purified. The reliability study will be done through the GT method taking both codes (c and agents (a as differential facets in. The generalization will be done through observers using a crossed multi-faceted design (A × O × C. In the homogeneity study the generalization facet will be done through codes using the same design that the reliability study.

  14. IdeaSquare - finding and creating new ways to collaborate

    CERN Multimedia

    CERN. Geneva


    IdeaSquare is a new pilot project meant to connect people inside and outside CERN to work together and helping the CERN-inspired innovations to create positive impact on society. We started our work last October with a five-month student project, Challenge Based Innovation (CBI) that has gathered some quite nice feedback along the way (, but is only one of our activities. Our big goal is scaling this collaboration up for different kinds of people all around the world to participate easily. We want to start by providing the student engineers, industrial designers and economists in the next round of CBI-course with better tools and services for working together and sharing their ideas. And in the long run, we want to create a scalable system that would allow a lot more people to work together and learn in similar constructive projects in the future. What are the tools at CERN we should use during the next round of CBI - Sharepoint, Vidyo, Owncloud, and something else? I...

  15. Creating Learning Environment Connecting Engineering Design and 3D Printing (United States)

    Pikkarainen, Ari; Salminen, Antti; Piili, Heidi

    Engineering education in modern days require continuous development in didactics, pedagogics and used practical methods. 3D printing provides excellent opportunity to connect different engineering areas into practice and produce learning by doing applications. The 3D-printing technology used in this study is FDM (Fused deposition modeling). FDM is the most used 3D-printing technology by commercial numbers at the moment and the qualities of the technology makes it popular especially in academic environments. For achieving the best result possible, students will incorporate the principles of DFAM (Design for additive manufacturing) into their engineering design studies together with 3D printing. This paper presents a plan for creating learning environment for mechanical engineering students combining the aspects of engineering design, 3D-CAD learning and AM (additive manufacturing). As a result, process charts for carrying out the 3D printing process from technological point of view and design process for AM from engineering design point of view were created. These charts are used in engineering design education. The learning environment is developed to work also as a platform for Bachelor theses, work-training environment for students, prototyping service centre for cooperation partners and source of information for mechanical engineering education in Lapland University of Applied Sciences.

  16. Fish and wildlife evaluation of wetlands created by mining activities

    International Nuclear Information System (INIS)

    Kepler, S.R.; Sabolcik, T.M.


    Four lacustrine wetland systems in Pennsylvania created by mining activities, either by sand and gravel or bituminous coal removal, were samples to determine the functional values of the fish and wildlife habitat. Most of the sampled sites were remnants of pre-act (1977) mining where minimal, if any, reclamation techniques were used. Natural succession within these impoundments have created ecosystems different in quality based on the availability of suitable habitat. Sampling techniques used to evaluate the wetland systems included initial water quality analyses, and aquatic habitat mapping using visual observations, LCD recorder, and computerized chart recorder. Fish populations were sampled using a boat mounted D.C. electrofishing unit with game fish being collected, weighted and measured and population estimates calculated as catch per unit effort (CPUE). Wildlife utilization of each site was conducted during the spring nesting season. Each site was surveyed for species utilization, nest searches determined whether nesting occurred and nesting success was noted. Wildlife utilization was determined by observation, tracks, calls, scat, etc. Whenever possible sites were monitored during the fall migration period to determine whether the sites were being utilized by migratory waterfowl. Wetland vegetative studies were also conducted at each site. Wetland species were identified and concentrations and dispersion of each wetland species were noted. Each sampled wetland data set is presented separately because of the variabilities between sampled sites based on the geology, reclamation status, and habitat

  17. Preparing to Accept Research Data: Creating Guidelines for Librarians

    Directory of Open Access Journals (Sweden)

    Laura B. Palumbo


    Full Text Available Rutgers University Libraries have recognized the need to expand their current research data services into a well-documented and well-supported service available to the Rutgers research community. In 2005, Rutgers University Libraries created RUcore, Rutgers University Community Repository, which has served as the University’s formal repository for institutional scholarship, special collections, and Electronic Theses & Dissertations. With the impetus of the 2010 NSF directive for research data sharing and preservation, RUcore development was extended to accept research data content. Ingest of pilot data projects began in 2010 via a librarian-mediated process. In order to provide a better defined workflow and mission for research data services, in July 2014, the Rutgers University Librarian organized a Task Force to investigate the evaluation process for technical, legal, and confidential issues involved in research data acceptance, and to establish an administrative and evaluation framework for the deposit of research data. After a review of 35 repositories using 34 criteria, the Task Force drafted a plan for research data acceptance which proposes wide-spread acceptance of mediated data projects, and prepares for future self-deposit in an online interface. This paper will discuss the issues addressed by the Task Force; acknowledging ownership of data through an institutional data policy, preventing exposure of confidential or sensitive data, establishing a reconfigured data team, requirements for storage capacity and funding, creating a workflow which includes collaboration with research offices, and offering guidance for both researchers and librarians working with research data.

  18. Leading change to create a healthy and satisfying work environment. (United States)

    Sanders, Carolyn L; Krugman, Mary; Schloffman, Danielle H


    Nurse executives must take a leadership role in creating a healthy work environment for nurses and all disciplines. Engaging in partnerships and empowering clinical nurses to construct the solutions to barriers that may stand in the way of the goal of a satisfied and healthy workforce are important strategies toward success. This publication outlines many projects a 3-time Magnet-designated academic hospital has implemented, working with our shared leadership councils, to meet the standards for a healthy work environment. These initiatives, from the unit to the hospital level, included standardizing a culture change of uninterrupted meal breaks, the creation of intensive care unit Zen rooms, strategies to better manage increased patient volumes, best practices for facility design, enhancing physician-nurse relations, and a hospital wellness program. Data were benchmarked against national nurse and employee surveys to compare progress and report outcomes. Two important nursing organization structures that have contributed to the success of a healthy and satisfied nursing work environment include UEXCEL, a longstanding clinical nurse professional practice program, and the hospital's 11-year participation in the University HealthSystem Consortium/American Association of Colleges of Nursing National Post-Baccalaureate Nurse Residency Program. A highly engaged, well-educated, and committed nursing workforce, nurtured by a strong leadership team, has created a positive work environment characterized by low turnover and high retention.

  19. Student creativity in creating cell organelles as media for learning (United States)

    Fatmawati, B.


    Creativity is not formed by itself but it is influenced by some others factors. Creativity is a . person’s ability to create / generate an idea embodied in the form of a product to solve problems which is accepted socially, spiritually, artificially, scientifically, and technologically. Learning media is a means of communication to deliver learning materials. There are three kinds of learning media produced by students such as books story, playdough, and the utilization of inorganic waste. The focus of this research is to know the students’ creativity in producing learnning media to understand an Abstract material especially on topic of cell organelles of animal and plant cell. Data analysis is using two ways that calculate the score of mastery in terms of concepts and creativity. The results showed the score of students’ understanding was increasing from 15 (average score of pre-test) to 31.1 (average score of post-test). It was categorized into three level, that are, high level with 21.4% of participants, medium with 64.3%, and low with 14.3%). Seven groups of students make learning media made of waste, playdough, and waste made in story form. The assessment of creativity involved four aspects, namely, color combinations, stringing, tidiness, and make (the accuracy of the concept with the form). Thus, it can be argued that self-created learning media helps in understanding the Abstract concepts of cell organelles.

  20. Creating the Economy of Virtuality: Systemic Aspects and Educational Considerations

    Directory of Open Access Journals (Sweden)

    Julio Rezende


    Full Text Available This article discuss how an economy of virtuality had been created in Orlando, United States, with the great collaboration of entrepreneurs, creativists and the action of academic institutions like University of Central Florida (UCF. In UCF the Florida Interactive Entertainment Academy – FIEA is an exemplary initiative of education that aims at creating new professionals for the economy of virtuality. Examining the case of Orlando city, would be seen the economic outcomes of the operation of different activities of virtuality: creation of jobs, revenues, tax and improving the quality of life of this community. The research debates the understanding of Economy of Virtuality and as also a educational field. The virtuality can been seen as a technology (a combination of developed hardware and software and as a psychological experience (values, time/ availability, health, motivation, emotions and education. The article presents the story of virtuality and also a typical pathway in the creation of products in Economy of Virtuality taking the example of Spider-Man and the event Awesome.Con held in Washington D.C. in the period of 3 to 5 June 2016. At Central Florida Research Park (CFRP, there are 146 businesses in 59 buildings (March/2016 generating aproximally10 thousand jobs operating.

  1. A modular approach to creating large engineered cartilage surfaces. (United States)

    Ford, Audrey C; Chui, Wan Fung; Zeng, Anne Y; Nandy, Aditya; Liebenberg, Ellen; Carraro, Carlo; Kazakia, Galateia; Alliston, Tamara; O'Connell, Grace D


    Native articular cartilage has limited capacity to repair itself from focal defects or osteoarthritis. Tissue engineering has provided a promising biological treatment strategy that is currently being evaluated in clinical trials. However, current approaches in translating these techniques to developing large engineered tissues remains a significant challenge. In this study, we present a method for developing large-scale engineered cartilage surfaces through modular fabrication. Modular Engineered Tissue Surfaces (METS) uses the well-known, but largely under-utilized self-adhesion properties of de novo tissue to create large scaffolds with nutrient channels. Compressive mechanical properties were evaluated throughout METS specimens, and the tensile mechanical strength of the bonds between attached constructs was evaluated over time. Raman spectroscopy, biochemical assays, and histology were performed to investigate matrix distribution. Results showed that by Day 14, stable connections had formed between the constructs in the METS samples. By Day 21, bonds were robust enough to form a rigid sheet and continued to increase in size and strength over time. Compressive mechanical properties and glycosaminoglycan (GAG) content of METS and individual constructs increased significantly over time. The METS technique builds on established tissue engineering accomplishments of developing constructs with GAG composition and compressive properties approaching native cartilage. This study demonstrated that modular fabrication is a viable technique for creating large-scale engineered cartilage, which can be broadly applied to many tissue engineering applications and construct geometries. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Iterating between Tools to Create and Edit Visualizations. (United States)

    Bigelow, Alex; Drucker, Steven; Fisher, Danyel; Meyer, Miriah


    A common workflow for visualization designers begins with a generative tool, like D3 or Processing, to create the initial visualization; and proceeds to a drawing tool, like Adobe Illustrator or Inkscape, for editing and cleaning. Unfortunately, this is typically a one-way process: once a visualization is exported from the generative tool into a drawing tool, it is difficult to make further, data-driven changes. In this paper, we propose a bridge model to allow designers to bring their work back from the drawing tool to re-edit in the generative tool. Our key insight is to recast this iteration challenge as a merge problem - similar to when two people are editing a document and changes between them need to reconciled. We also present a specific instantiation of this model, a tool called Hanpuku, which bridges between D3 scripts and Illustrator. We show several examples of visualizations that are iteratively created using Hanpuku in order to illustrate the flexibility of the approach. We further describe several hypothetical tools that bridge between other visualization tools to emphasize the generality of the model.

  3. A transposase strategy for creating libraries of circularly permuted proteins. (United States)

    Mehta, Manan M; Liu, Shirley; Silberg, Jonathan J


    A simple approach for creating libraries of circularly permuted proteins is described that is called PERMutation Using Transposase Engineering (PERMUTE). In PERMUTE, the transposase MuA is used to randomly insert a minitransposon that can function as a protein expression vector into a plasmid that contains the open reading frame (ORF) being permuted. A library of vectors that express different permuted variants of the ORF-encoded protein is created by: (i) using bacteria to select for target vectors that acquire an integrated minitransposon; (ii) excising the ensemble of ORFs that contain an integrated minitransposon from the selected vectors; and (iii) circularizing the ensemble of ORFs containing integrated minitransposons using intramolecular ligation. Construction of a Thermotoga neapolitana adenylate kinase (AK) library using PERMUTE revealed that this approach produces vectors that express circularly permuted proteins with distinct sequence diversity from existing methods. In addition, selection of this library for variants that complement the growth of Escherichia coli with a temperature-sensitive AK identified functional proteins with novel architectures, suggesting that PERMUTE will be useful for the directed evolution of proteins with new functions.

  4. The strongly coupled quark-gluon plasma created at RHIC

    International Nuclear Information System (INIS)

    Heinz, Ulrich


    The relativistic heavy-ion collider (RHIC) was built to re-create and study in the laboratory the extremely hot and dense matter that filled our entire universe during its first few microseconds. Its operation since June 2000 has been extremely successful, and the four large RHIC experiments have produced an impressive body of data which indeed provide compelling evidence for the formation of thermally equilibrated matter at unprecedented temperatures and energy densities-a 'quark-gluon plasma (QGP)'. A surprise has been the discovery that this plasma behaves like an almost perfect fluid, with extremely low viscosity. Theorists had expected a weakly interacting gas of quarks and gluons, but instead we seem to have created a strongly coupled plasma liquid. The experimental evidence strongly relies on a feature called 'elliptic flow' in off-central collisions, with additional support from other observations. This paper explains how we probe the strongly coupled QGP, describes the ideas and measurements which led to the conclusion that the QGP is an almost perfect liquid, and shows how they tie relativistic heavy-ion physics into other burgeoning fields of modern physics, such as strongly coupled Coulomb plasmas, ultracold systems of trapped atoms and superstring theory

  5. The Wisdom of e-crowds: Can Masses Create Value?

    Directory of Open Access Journals (Sweden)

    Wieczerzycki Marcin


    Full Text Available With the rising popularity of the Internet, interactions between companies and their consumers have become more common and meaningful. Researchers often tend to apply the metaphor of community to these on-line networks of B2C relationships. However, this term implies durability and a long-term orientation. It does not cover more incidental, short-lived groups of consumers, who therefore should not be treated as communities. The purpose of this paper is to explore the ability of these short-term, collective consumer phenomena (addressed as e-crowds within the scope of this paper to create value. Based on a critical literature analysis that considers works from several different fields of knowledge (including management, economics, psychology and media studies and empirical examples, we argue that while lacking a complex internal organization, e-crowds are capable of creating use, exchange and sign value when certain conditions are met. However, they are equally likely to perform value-destroying activities, which present real risks for companies that interact with e-crowds.

  6. Instructor-Created Activities to Engage Undergraduate Nursing Research Students. (United States)

    Pierce, Linda L; Reuille, Kristina M


    In flipped or blended classrooms, instruction intentionally shifts to a student-centered model for a problem-based learning approach, where class time explores topics in greater depth, creating meaningful learning opportunities. This article describes instructor-created activities focused on research processes linked to evidence-based practice that engage undergraduate nursing research students. In the classroom, these activities include individual and team work to foster critical thinking and stimulate student discussion of topic material. Six activities for small and large student groups are related to quantitative, qualitative, and both research processes, as well as applying research evidence to practice. Positive student outcomes included quantitative success on assignments and robust student topic discussions, along with instructor-noted overall group engagement and interest. Using these activities can result in class time for the construction of meaning, rather than primarily information transmission. Instructors may adopt these activities to involve and stimulate students' critical thinking about research and evidence-based practice. [J Nurs Educ. 2018;57(3):174-177.]. Copyright 2018, SLACK Incorporated.

  7. Creating permeable fracture networks for EGS: Engineered systems versus nature

    Energy Technology Data Exchange (ETDEWEB)

    Stephen L Karner


    The United States Department of Energy has set long-term national goals for the development of geothermal energy that are significantly accelerated compared to historical development of the resource. To achieve these goals, it is crucial to evaluate the performance of previous and existing efforts to create enhanced geothermal systems (EGS). Two recently developed EGS sites are evaluated from the standpoint of geomechanics. These sites have been established in significantly different tectonic regimes: 1. compressional Cooper Basin (Australia), and 2. extensional Soultz-sous-Fôrets (France). Mohr-Coulomb analyses of the stimulation procedures employed at these sites, coupled with borehole observations, indicate that pre-existing fractures play a significant role in the generation of permeability networks. While pre-existing fabric can be exploited to produce successful results for geothermal energy development, such fracture networks may not be omnipresent. For mostly undeformed reservoirs, it may be necessary to create new fractures using processes that merge existing technologies or use concepts borrowed from natural hydrofracture examples (e.g. dyke swarms).

  8. Directed Motivational Currents: Using vision to create effective motivational pathways

    Directory of Open Access Journals (Sweden)

    Christine Muir


    Full Text Available Vision, that is, the mental representation of the sensory experience of a future goal state (involving imagination and imagery, is currently at the forefront of motivational innovation, and in recent years it has been seen increasingly more often in the motivational tool kit of practicing language teachers. Theories such as Dörnyei’s L2 motivational self system have explored the power that creating effective visions can harness (see, e.g., Dörnyei & Kubanyiova, 2014 and when viewed in conjunction with other current research avenues, such as future time perspective and dynamic systems theory, vision offers exciting potential. A Directed Motivational Current is a new motivational construct that we suggest is capable of integrating many current theoretical strands with vision: It can be described as a motivational drive which energises long-term, sustained behaviour (such as language learning, and through placing vision and goals as critical central components within this construct, it offers real and practical motivational potential. In this conceptual paper, we first discuss current understandings of vision and of Directed Motivational Currents, and then analyse how they may be optimally integrated and employed to create effective motivational pathways in language learning environments.

  9. Creating a climate and culture for sustainable organizational change

    Directory of Open Access Journals (Sweden)

    Mahsa Zolghadr


    Full Text Available The objective of this research is to investigate the balance between employees’ organizational behavior and the method of managers’ decision making in creating a good organizational climate in Gas Company of Zanjan province, Iran. The statistical population of this research includes 180 professions, staffs, and managers of the company and the study selects 120 people according to random sampling and by the use of Cochran formula. The descriptive-survey research method is cross sectional type. The questionnaire made by researcher was used for data gathering and its reliability and validity was approved. SPSS software was used for data analysis, correlation test was used for the effectiveness, and the effectiveness was specified. Also, LISREL software has been used for performing structural equations of model. The results of the research state that the variables of the balance between organizational behavior of staffs such as the balance of management commitment, balance of leadership, balance of communications, balance of learning, and balance of motivation were effective on its effectiveness in creating good organizational climate in the Gas Company of Zanjan province by managers’ decision making methods.

  10. Food web heterogeneity and succession in created saltmarshes (United States)

    Nordstrom, M C; Demopoulos, Amanda W.J.; Whitcraft, CR; Rismondo, A.; McMillan, P.; Gonzales, J P; Levin, L A


    1. Ecological restoration must achieve functional as well as structural recovery. Functional metrics for reestablishment of trophic interactions can be used to complement traditional monitoring of structural attributes. In addition, topographic effects on food web structure provide added information within a restoration context; often, created sites may require spatial heterogeneity to effectively match structure and function of natural habitats. 2. We addressed both of these issues in our study of successional development of benthic food web structure, with focus on bottom–up driven changes in macroinvertebrate consumer assemblages in the salt marshes of the Venice Lagoon, Italy. We combined quantified estimates of the changing community composition with stable isotope data (13C:12C and 15N:14N) to compare the general trophic structure between created (2–14 years) marshes and reference sites and along topographic elevation gradients within salt marshes. 3. Macrofaunal invertebrate consumers exhibited local, habitat-specific trophic patterns. Stable isotope-based trophic structure changed with increasing marsh age, in particular with regards to mid-elevation (Salicornia) habitats. In young marshes, the mid-elevation consumer signatures resembled those of unvegetated ponds. The mid elevation of older and natural marshes had a more distinct Salicornia-zone food web, occasionally resembling that of the highest (Sarcocornia-dominated) elevation. In summary, this indicates that primary producers and availability of vascular plant detritus structure consumer trophic interactions and the flow of carbon. 4. Functionally different consumers, subsurface-feeding detritivores (Oligochaeta) and surface grazers (Hydrobia sp.), showed distinct but converging trajectories of isotopic change over time, indicating that successional development may be asymmetric between ‘brown’ (detrital) guilds and ‘green’ (grazing) guilds in the food web. 5. Synthesis and applications

  11. Creating a Flood Risk Index to Improve Community Resilience (United States)

    Klima, K.; El Gammal, L.


    While flood risk reduction is an existent discourse and agenda in policy and insurance, vulnerabilities vary between communities; some communities may have aging infrastructure, or an older/poorer population less able to absorb a flood, putting them at increased risk from the hazards. As a result, some are considering environmental justice aspects of flood risk reduction. To date, catastrophe models have focused on creating floodmaps (e.g., NOAA's Sea Level Rise Viewer, Climate Central's Surging Seas), or on linking hydrological models to economic loss models (e.g., HEC-RAS + HAZUS). However, this approach may be highly inequitable between areas of different income (as well as other demographics). Some have begun work on combining hydrology with vulnerability information (e.g., USACE's North Atlantic Comprehensive Coastal Study). To our knowledge, no one has tried to adapt the more advanced known heat risk theory to water risk by combining hydrology information (e.g., HEC-RAS, floodplain maps) with the social vulnerability (e.g., Cutter et al.) of the residents. This project will create a method to combine water hazard data with a derived water vulnerability index to help a community understand their current and future water risk. We will use the case study area of Pittsburgh, PA, which faces severe precipitation and riverine flooding hazards. Building on present literature of factors influencing water vulnerability contextualized to the Pittsburgh region, we will identify, quantify, and map the top factors impacting water vulnerability. We will combine these with flood maps to identify the geospatial distribution of water risk. This work will allow policy makers to identify location-specific aspects of water vulnerability and risk in any community, thus promoting environmental justice. It is possible that this type of original research would create maps of relative water risk that may prove as understandable to the general public as other flood maps, and may also

  12. Successful Undergraduate Research: Creating Win-Win-Win (United States)

    Guswa, A. J.; Rhodes, A. L.


    Undergraduate involvement in research has the potential to advance science, enhance education, strengthen the research community, and raise general awareness of the importance and impact of scientific understanding. Rather than being competing objectives, these goals are synergistic. Effective research experiences are those that create win-win-win situations: benefits to the student, benefits to the project, and benefits to the scientific community. When structured appropriately, undergraduate research fits into a learner-centered paradigm that puts emphasis on student learning, rather than instructor teaching. Under such a paradigm the student and professor learn together, constructing knowledge by integrating information with critical-thinking and problem-solving skills, and use this knowledge to address issues in real-life contexts. Creating such a learning environment requires that the professor be vested in the outcome of the research, that the student take a meta-cognitive approach to the project and work at a level appropriate to her abilities, and that the student understand how her contribution fits into the project and the larger field. All of these factors lead to greater independence, confidence, and productivity on the part of the student. By providing undergraduates with these experiences, we introduce not only future scientists but also non-scientists to the excitement of discovery and the value of scientific research. Currently, we involve undergraduates in our research on the hydrology and geochemistry of a tropical montane cloud forest in Monteverde, Costa Rica. At the start of each student's involvement, we provide her with the big picture: our project goals, the relevant social issues, and the importance of watershed research. Each student then articulates her own educational and project objectives. Together, we choose tasks that match her skills and interests with our scholarly work. Specific activities range from literature review to

  13. When we decided to create the Revista Scientific

    Directory of Open Access Journals (Sweden)

    Oscar Antonio Martínez Molina


    Full Text Available When we proposed to create the Revista Scientific, we had many doubts about what would be the treatment to be followed for the development of it? On the one hand, we needed to create a common basis for their more ethical and moral aspects so that the authors always applied the same criteria. This is not only to achieve an editorial unit, but to establish guidelines to follow throughout the publication, so as to facilitate the reading and understanding of the contents from the respect to the information, to the sources, but on all to the readers. The rules created are, therefore, the guidelines to be followed by the authors that appear in our publication, which must take into account these basic rules. Another point to be addressed was the selection of a disciplinary and multidisciplinary team at the international level that is in charge of the valuation of scientific productions, high invoice equipment of different Universities and Organizations recognized worldwide. On the basis of the above considerations, the question arises of deciding, what can or should be, and what can not or should not be counted, but rather how to explain and explain information in the most ethically correct way from the deontological perspective of the writer. It should be noted that Scientific tries to serve as a complement and informative tool for both teachers and the general public. We aim to disseminate scientific and technological knowledge, through the original results, the product of scientific research, which represent a contribution to the development of science and technology. It includes works, products of scientific research and theoretical reflections that, due to their relevance, merit publication, and in this way contribute to the visibility of intellectual production in the areas of education and social sciences. Scientific Magazine is aimed at the academic audience in its different levels (Initial, Basic, University as well as the scientific community

  14. Creating virtual electrodes with 2D current steering (United States)

    Spencer, Thomas C.; Fallon, James B.; Shivdasani, Mohit N.


    Objective. Current steering techniques have shown promise in retinal prostheses as a way to increase the number of distinct percepts elicitable without increasing the number of implanted electrodes. Previously, it has been shown that ‘virtual’ electrodes can be created between simultaneously stimulated electrode pairs, producing unique cortical response patterns. This study investigated whether virtual electrodes could be created using 2D current steering, and whether these virtual electrodes can produce cortical responses with predictable spatial characteristics. Approach. Normally-sighted eyes of seven adult anaesthetised cats were implanted with a 42-channel electrode array in the suprachoroidal space and multi-unit neural activity was recorded from the visual cortex. Stimuli were delivered to individual physical electrodes, or electrodes grouped into triangular, rectangular, and hexagonal arrangements. Varying proportions of charge were applied to each electrode in a group to ‘steer’ current and create virtual electrodes. The centroids of cortical responses to stimulation of virtual electrodes were compared to those evoked by stimulation of single physical electrodes. Main results. Responses to stimulation of groups of up to six electrodes with equal ratios of charge on each electrode resulted in cortical activation patterns that were similar to those elicited by the central physical electrode (centroids: RM ANOVA on ranks, p  >  0.05 neural spread: one-way ANOVA on Ranks, p  >  0.05). We were also able to steer the centroid of activation towards the direction of any of the electrodes of the group by applying a greater charge to that electrode, but the movement in the centroid was not found to be significant. Significance. The results suggest that current steering is possible in two dimensions between up to at least six electrodes, indicating it may be possible to increase the number of percepts in patients without increasing the number

  15. IT Tools for Teachers and Scientists, Created by Undergraduate Researchers (United States)

    Millar, A. Z.; Perry, S.


    Interns in the Southern California Earthquake Center/Undergraduate Studies in Earthquake Information Technology (SCEC/UseIT) program conduct computer science research for the benefit of earthquake scientists and have created products in growing use within the SCEC education and research communities. SCEC/UseIT comprises some twenty undergraduates who combine their varied talents and academic backgrounds to achieve a Grand Challenge that is formulated around needs of SCEC scientists and educators and that reflects the value SCEC places on the integration of computer science and the geosciences. In meeting the challenge, students learn to work on multidisciplinary teams and to tackle complex problems with no guaranteed solutions. Meantime, their efforts bring fresh perspectives and insight to the professionals with whom they collaborate, and consistently produces innovative, useful tools for research and education. The 2007 Grand Challenge was to design and prototype serious games to communicate important earthquake science concepts. Interns broke themselves into four game teams, the Educational Game, the Training Game, the Mitigation Game and the Decision-Making Game, and created four diverse games with topics from elementary plate tectonics to earthquake risk mitigation, with intended players ranging from elementary students to city planners. The games were designed to be versatile, to accommodate variation in the knowledge base of the player; and extensible, to accommodate future additions. The games are played on a web browser or from within SCEC-VDO (Virtual Display of Objects). SCEC-VDO, also engineered by UseIT interns, is a 4D, interactive, visualization software that enables integration and exploration of datasets and models such as faults, earthquake hypocenters and ruptures, digital elevation models, satellite imagery, global isochrons, and earthquake prediction schemes. SCEC-VDO enables the user to create animated movies during a session, and is now part

  16. Editorial: Creating, Supporting, Sustaining and Evaluating Virtual Learning Communities

    Directory of Open Access Journals (Sweden)

    Xun Ge


    Full Text Available This special issue is dedicated to creating, building, supporting, sustaining and evaluating virtual learning communities (VLCs using emerging technologies. The contributors from diverse disciplines have come together to share their valuable experiences and findings through their research in the following themes: (a instructional models, strategies, approaches for building, supporting and evaluating VLCs, (b designing effective use of tools to promote discourse and scaffold peer interactions among members, (c iterative processes and models of designing and evaluating VLCs; and (d various variables concerning VLCs, such as virtual community behaviors, cultural factors, adoption patterns of tools. It is hoped that these articles will provide practical guidance and offer valuable experience to both educators and researchers who are interested in designing effective VLCs and examining various aspects of VLCs to advance our understanding of VLCs.

  17. Media created violence: a social determinant of mental health. (United States)

    Begum, Shamshad; Khowaja, Shaneela Sadruddin; Ali, Gulnar


    In today's high technological world, scientific discoveries contribute remarkable development to human life, but it could also have an adverse impact on mankind. Among all these advancements, media is one of the inventions which aims at capturing a countless group of viewers and transmit information via various mediums. Media violence is considered one of the hampering determinants which harms an individual psychologically. The primary goal of a health professional is to work for the maintenance of mental health. Therefore, it is imperative to create an understanding about the impact of media violence on mental health, particularly in the Pakistani context. Violence has become a major public health problem in Pakistan. The main cause of violence seems to be anger and frustration due to poverty, political conflicts, lack of education, and the overall governance approach in the country. Therefore, there is a prime need to think and work on this neglected area like conducting research and increasing public awareness, and to curb media violence.

  18. Creating a Chinese-style coal-industry economic system

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Y


    Efforts to keep China's coal industry financially healthy and to continue increasing production also created problems in terms of output, transport, environmental damage, accidents, and labor pressures. In addition to the historical and economic reasons for these pressures, inadequate leadership and policy errors made things worse. An analysis suggests three problems: (1) an inequitable division of duties between government and business, (2) a neglected marketplace, and (3) the dominance of egalitarianism. The report relates these problems to the production of coal and a package of reforms which restructured the economic system of the industry to give it more autonomy and economic responsibility. The reforms emphasize rational pricing and use of coal as well as management of the industry.

  19. Sandia National Laboratories, California proposed CREATE facility environmental baseline survey.

    Energy Technology Data Exchange (ETDEWEB)

    Catechis, Christopher Spyros


    Sandia National Laboratories, Environmental Programs completed an environmental baseline survey (EBS) of 12.6 acres located at Sandia National Laboratories/California (SNL/CA) in support of the proposed Collaboration in Research and Engineering for Advanced Technology and Education (CREATE) Facility. The survey area is comprised of several parcels of land within SNL/CA, County of Alameda, California. The survey area is located within T 3S, R 2E, Section 13. The purpose of this EBS is to document the nature, magnitude, and extent of any environmental contamination of the property; identify potential environmental contamination liabilities associated with the property; develop sufficient information to assess the health and safety risks; and ensure adequate protection for human health and the environment related to a specific property.

  20. The nurse manager's role in creating a healthy work environment. (United States)

    Whiley, K


    The role of nurse manager of an acute or critical care unit is one of the most difficult roles in healthcare today. This individual must juggle patient care issues, staff concerns, medical staff relationships, supply inadequacies, and organizational initiatives--and then balance all of this with a personal life. The only way in which any of this is remotely possible is if the patient care unit provides a supportive environment for patients, families, and staff. The nurse manager is a pivotal person in this effort: research repeatedly shows that people don't leave their jobs, they leave their managers. This article describes how the nurse manager of an acute neurosciences unit worked with her staff to define, create, and maintain a work environment in which patient care improved, people enjoyed working, and retention of staff increased.

  1. Metasynthetic Madness: What Kind of Monster Have We Created? (United States)

    Thorne, Sally


    From its origins in the 1990s, the qualitative health research metasynthesis project represented a methodological maneuver to capitalize on a growing investment in qualitatively derived study reports to create an interactive dialogue among them that would surface expanded insights about complex human phenomena. However, newer forms positioning themselves as qualitative metasynthesis but representing a much more technical and theoretically superficial form of scholarly enterprise have begun to appear in the health research literature. It seems imperative that we think through the implications of this trend and determine whether it is to be afforded the credibility of being a form of qualitative scholarship and, if so, what kind of scholarship it represents. As the standardization trend in synthesis research marches forward, we will need clarity and a strong sense of purpose if we are to preserve the essence of what the qualitative metasynthesis project was intended to be all about. © The Author(s) 2016.

  2. Reel success creating demo reels and animation portfolios

    CERN Document Server

    Cabrera, Cheryl


    Are you an animator looking to get your foot in the door to the top studios?It's tough if you don't have a demo reel and portfolio that reflects your unique style and incredible talents.  The reception of that reel will make or break you; so it's no wonder that creating a demo reel can be such a daunting task.  Reel Success by Cheryl Cabrera can help.  This book guides you into putting the right content into your portfolio, how to cater to the right audience, and how to harness the power of social media and network effectively.  Accompanied by case studies of actual students

  3. News and Syria: Creating key media moments in the conflict

    Directory of Open Access Journals (Sweden)

    Greg Simons


    Full Text Available Mass media play a critical role through the production of news in influencing how citizens have their perceptions and opinions shaped. This article intends to delve into the role of news production in creating knowledge and shaping public perception and opinion within the Syrian case and demonstrates that news is not an accidental occurrence, neither in terms of subject or timing. Articles on specific issues, such as the reaction to the chemical weapons attack of August 2013 and the allegations of “industrial killings” by the Syrian government, appearing in the mass media, are subjected to analysis based on the theoretical notions outlined in the paper. These two cases hint that the timing and nature of these specific news events are not as “random” and coincidental as would seem at first glance.

  4. Creating and improving multi-threaded Geant4

    CERN Document Server

    Dong, Xin; Apostolakis, John; Jarp, Sverre; Nowak, Andrzej; Asai, Makoto; Brandt, Daniel


    We document the methods used to create the multi-threaded prototype Geant4MT from a sequential version of Geant4. We cover the Source-to-Source transformations applied, and discuss the process of verifying the correctness of the Geant4MT toolkit and applications based on it. Tools to ensure that the results of a transformed multi-threaded application are exactly equal to the original sequential version are under development. Stand-alone or simple applications can be adapted within 1-2 working days. Geant4MT is shown to scale linearly on an 80-core computer. In the special case of a single worker thread on one core, 30% overhead has been observed. We explain the reasons for this and the improvements introduced to reduce this overhead.

  5. [Local health promotion plans: intersetoralities created in the territory]. (United States)

    Moysés, Simone Tetu; Franco de Sá, Ronice


    The article highlights the importance of considering the specificities of spaces/territories/ locations of individual and collective life in creating health promotion actions. It explores how this approach has conceptually consolidated respect for territoriality and territorial actions as a principle and an operational health promotion strategy. Based on the literature, the article also points to the need to envision the territory occupied as a locus to put intersetorialities into practice, giving a voice to people who live there, seek to and solve their complex problems, to existing and emerging social networks. It also presents a nationally and internationally validated strategy/method (Bamboo Method) for the development of local health promotion plans, which enables the prioritization of actions by listening to the people and to the managers.

  6. Co-creating value: Student contributions to smart cities

    Directory of Open Access Journals (Sweden)

    Chetan S. Sankar


    Full Text Available Given the interdependence of the public and private sectors and simultaneous and massive impact of widespread disasters on the entire community, this paper investigates the use of information technologies, specifically geospatial information systems, within the multi-organizational community to effectively co-create value during disaster response and recovery efforts. We present and examine in depth a participatory action research project in a disaster-experienced coastal community conducted during the 2006-2014 time period. The results of the action research project and analysis of a survey completed by stakeholders leads to a list of findings, in particular those related to developing a model of next generation learning design where students are co-creators of value to the smart cities.

  7. Problems in creating enviroment and health protection systems

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Reznichenko, V.Yu.


    The problems in creating environmental and health protection systems are considered with relation to development of nuclear energetics facilities. A problem of transition from the system of detection and observation to the uniform system of environment and health protection and control is set. The objectives and problems of such a system are analyzed and the basic principles of their construction are outlined. A system conception for a fuel energetic complex is described. Usefulness of such systems in solving problems of sites of industrial objects including nuclear power industrial objects, of removal of these objects from service and etc. is shown. New requirements to medical-biological investigations on designing of such a system are discussed [ru

  8. Creating a hybrid sense of belonging in Copenhagen

    DEFF Research Database (Denmark)

    Monka, Malene

    to local products and culturally by enacting the competition (Coupland 2014). Yet, I argue that the participants do not create a copy of the activity as it is played out in its original setting, rather it is ascribed a certain urban coolness, which might be a way of demonstrating hybrid senses of belonging...... the first event, a Facebook-community was set up to organize and promote succeeding events. By analyzing empirical data from Facebook I point to how the participants draw on a range of ‘languagecultural practices’ (Cornips & de Rooij in press) to re-contextualize the rural tradition to an urban setting. I...... discuss whether and how the two dimensions of ‘belonging’ (Antonsich 2010), i.e. place-belongingness and politics of belonging, are made relevant by the participants. The connection to Southern Jutland is pointed to in several ways: linguistically by using dialect orthography, materially by pointing...

  9. Reconceiving myself: challenging conundrums and creating feminist community psychology. (United States)

    Mulvey, Anne


    This narrative describes how contexts in which I grew up influenced my pursuit of feminist community psychology and my work in a master's level community psychology program. Grappling inside and outside with longings that appear contradictory and contradictions that others do not experience has fueled passionate engagement with life and work. Growing up an Irish Catholic girl in the Midwest U.S. post World War II era informed and constrained my relational and vocational choices. Participation in consciousness raising and informal community building initiatives opened opportunities for personal, professional and political growth. These intensely personal interconnected stories describe conundrums that I experienced and the ways in which they were reconceived and repaired in the process of creating self, work and community.

  10. Can capital markets create incentives for pollution control?

    International Nuclear Information System (INIS)

    Lanoie, Paul; Roy, Maite; Laplante, Benoit


    It has been observed that upon trading-off the costs and benefits of pollution control, profit-maximizing firms may choose not to invest their resources in pollution abatement since the expected penalty imposed by regulators falls considerably short of the investment cost. Regulators have recently embarked on a deliberate strategy to release information to markets (investors and consumers) regarding firms' environmental performance in order to enhance incentives for pollution control. In this paper, we analyze the role that capital markets may play to create such incentives. Evidence drawn from American and Canadian studies indicates that capital markets react to the release of information, and that large polluters are affected more significantly by such release than smaller polluters. This result appears to be a function of the regulator's willingness to undertake strong enforcement actions as well as the possibility for capital markets to rank and compare firms with respect to their environmental performance

  11. Creating Sustainable Fresh Food Supply Chains through Waste Reduction

    DEFF Research Database (Denmark)

    Kaipia, Riikka; Dukovska-Popovska, Iskra; Loikkanen, Lauri


    . Design/methodology/approach – This work has been designed as an exploratory case study in three fresh food supply chains, milk, fresh fish, and fresh poultry, in the Nordic countries. The cases are based on interviews and data from the databases of the companies involved. Each case focuses on analyzing...... uses of shared information to create a sustainable fresh food supply chain. Findings –The performance of the perishable food chain can be improved by more efficient information sharing. The key to improved operations is how and for which purposes the shared data should be used. In addition, changes......Purpose – The aim of this empirical paper is to study information sharing in fresh food supply chains, with a specific goal of reducing waste and facilitating sustainable performance. The study focuses on material and information flow issues, specifically on sharing demand and shelf-life data...

  12. Creating effective social marketing: let your customer be your guide. (United States)

    Brookes, R


    Social marketing uses commercial marketing techniques to change behaviors that benefit individuals or society in general. Unlike conventional marketing, which seeks to sell products or services, social marketing aims to promote voluntary behavior change. Some examples of behaviors that have changed due to social marketing are: using seat belts, wearing bike helmets, child immunizations, and smoking cessation. Although good social marketing campaigns use the same techniques as that of commercial marketers, by letting the customer be the guide for all major decisions, it is not primarily advertising and is not about top-down planning and decisions. Instead, it is about having a consumer orientation, which means understanding the target audience very well. An effective social marketer must be committed to ongoing communication with the audience in order to create programs, products, or practice that enable them to make the changes desired.

  13. Potential roles for transposable elements in creating imprinted expression. (United States)

    Anderson, Sarah N; Springer, Nathan M


    Changes in gene expression can have profound effects on phenotype. Nature has provided many complex patterns of gene regulation such as imprinting. Imprinted genes exhibit differences in the expression of the maternal and paternal alleles, even though they reside in the same nucleus with access to the same trans-acting factors. Significant attention has been focused on the potential reasons that imprinted expression could be beneficial and stabilized by selection. However, less attention has focused on understanding how imprinted expression might arise or decay. We discuss the evidence for frequent turnover of imprinted expression based on evolutionary analyses in plants and the potential role for transposable elements (TEs) in creating imprinted expression patterns. Copyright © 2018 Elsevier Ltd. All rights reserved.

  14. Creating a Fair and Just Culture in Schools of Nursing. (United States)

    Barnsteiner, Jane; Disch, Joanne


    : In recent years, health care organizations have been moving away from a culture that responds to errors and near misses with "shame and blame" and toward a fair and just culture. Such a culture encourages and rewards people for speaking up about safety-related concerns, thus allowing the information to be used for system improvement. In part 1 of this series, we reported on findings from a study that examined how nursing schools handled student errors and near misses. We found that few nursing schools had a policy or a reporting tool concerning these events; and that when policies did exist, the majority did not reflect the principles of a fair and just culture. This article, part 2 of the series, describes several strategies that nursing schools can use for creating such a culture.

  15. Creating and sustaining an academic-practice Partnership Engagement Model. (United States)

    Schaffer, Marjorie A; Schoon, Patricia M; Brueshoff, Bonnie L


    Public health clinical educators and practicing public health nurses (PHNs) are experiencing challenges in creating meaningful clinical learning experiences for nursing students due to an increase in nursing programs and greater workload responsibilities for both nursing faculty and PHNs. The Henry Street Consortium (HSC), a collaborative group of PHNs and nursing faculty, conducted a project to identify best practices for public health nursing student clinical learning experiences. Project leaders surveyed HSC members about preferences for teaching-learning strategies, facilitated development of resources and tools to guide learning, organized faculty/PHN pilot teams to test resources and tools with students, and evaluated the pilot team experiences through two focus groups. The analysis of the outcomes of the partnership engagement project led to the development of the Partnership Engagement Model (PEM), which may be used by nursing faculty and their public health practice partners to guide building relationships and sustainable partnerships for educating nursing students. © 2017 Wiley Periodicals, Inc.

  16. Making it Real: Faculty Collaboration to Create Video Content

    Directory of Open Access Journals (Sweden)

    Claudia Jennifer Dold


    Full Text Available Interest in integrative health care is a growing area of health practice, combining conventional medical treatments with safe and effective complementary and alternative medicine. These modalities relate to both improving physical and psychological well-being, and enhancing conventional talk therapy. In an interdisciplinary collaboration, teaching and library faculty have created a series of sixteen on-line video interviews that introduce practitioner-relevant experiences to students as supplemental course material. These videos are available through the department web-pages to students in other related disciplines as well, including Social Work, Counselor Education, Psychology, and the Colleges of Public Health, Nursing, and Medicine. The video series was undertaken as part of the educational mission of the library, bringing to the classroom new material that is essential to the professional development of future counselors.

  17. The Audience Wheel as a Technic to Create Transformative Learning

    DEFF Research Database (Denmark)

    Helth, Poula


    Purpose: The purpose of this chapter is to document how a new learning technic may create transformative learning in leadership in an organisational practice. Design/methodology/approach: The learning methods developed in the learning in practice (LIP) project include aesthetic performances...... combined with reflections. The intention has been to explore how leadership may be transformed, when leaders work as a collective of leaders. The learning methods developed and tested in the LIP project are art-informed learning methods, concepts of liminality and reflection processes carried out...... in the leaders’ organisational practice. Findings: One of the most important findings in the LIP project in relation to transformative learning is a new learning technique based on guided processes rooted in aesthetic performance combined with reflections and separation of roles as performer and audience...

  18. Creating low-impedance tetrodes by electroplating with additives (United States)

    Ferguson, John E.; Boldt, Chris; Redish, A. David


    A tetrode is a bundle of four microwires that can record from multiple neurons simultaneously in the brain of a freely moving animal. Tetrodes are usually electroplated to reduce impedances from 2-3 MΩ to 200-500 kΩ (measured at 1 kHz), which increases the signal-to-noise ratio and allows for the recording of small amplitude signals. Tetrodes with even lower impedances could improve neural recordings but cannot be made using standard electroplating methods without shorting. We were able to electroplate tetrodes to 30-70 kΩ by adding polyethylene glycol (PEG) or multi-walled carbon nanotube (MWCNT) solutions to a commercial gold-plating solution. The MWCNTs and PEG acted as inhibitors in the electroplating process and created large-surface-area, low-impedance coatings on the tetrode tips. PMID:21379404

  19. British Museum Exhibition Review: The Jericho Skull, Creating an Ancestor

    Directory of Open Access Journals (Sweden)

    Cara Hirst


    Full Text Available The temporary exhibit at the British Museum, open 15th December-19th February, and located to the right of the main entrance in the Raymond and Beverly Sackler Gallery (Room 59; is dedicated to a single Neolithic crania from Jericho, known as the Jericho Skull. This exhibit demonstrates the value of relatively recent technologies in archaeological research, highlighting the previously hidden information made possible through CT scanning and the value of these methods in both archaeological research but also in communicating archaeology in a visually stimulating manner which allows an exhibit to take a single item, and create an in depth exhibit featuring both the original material and two cranial 3D prints along with a facial reconstruction.

  20. Creating Shared Mental Models: The Support of Visual Language (United States)

    Landman, Renske B.; van den Broek, Egon L.; Gieskes, José F. B.

    Cooperative design involves multiple stakeholders that often hold different ideas of the problem, the ways to solve it, and to its solutions (i.e., mental models; MM). These differences can result in miscommunication, misunderstanding, slower decision making processes, and less chance on cooperative decisions. In order to facilitate the creation of a shared mental model (sMM), visual languages (VL) are often used. However, little scientific foundation is behind this choice. To determine whether or not this gut feeling is justified, a research was conducted in which various stakeholders had to cooperatively redesign a process chain, with and without VL. To determine whether or not a sMM was created, scores on agreement in individual MM, communication, and cooperation were analyzed. The results confirmed the assumption that VL can indeed play an important role in the creation of sMM and, hence, can aid the processes of cooperative design and engineering.