WorldWideScience

Sample records for nano composite materials

  1. Nano-composite materials

    Science.gov (United States)

    Lee, Se-Hee; Tracy, C. Edwin; Pitts, J. Roland

    2010-05-25

    Nano-composite materials are disclosed. An exemplary method of producing a nano-composite material may comprise co-sputtering a transition metal and a refractory metal in a reactive atmosphere. The method may also comprise co-depositing a transition metal and a refractory metal composite structure on a substrate. The method may further comprise thermally annealing the deposited transition metal and refractory metal composite structure in a reactive atmosphere.

  2. Preparation of Nano/Micron Composite Materials by Process Method

    Institute of Scientific and Technical Information of China (English)

    GAN Ai-feng; WEI Qi; JI; Yuan; HU Chuan-xin; YAO Jun-min

    2004-01-01

    This thesis put forward a method that controls the process of synthesizing nanomaterial to realize the composite of nanomaterial and micronmaterial. This thesis realizes the composite of nanomaterial and micronmaterial by adding micronmaterial during production of nanomaterial through sol-gel method, also introduces the technique and experiment's process preparation of nanocomposite material, and successfully prepared nanocomposite materials with nano-PbTiO3 covered on the surface of micron-Ni. According to the sample's SEM-pictures, the core-shell can be observed plate microstructure, and it is uniform, tight, full and good.

  3. [Study on spectroscopic characterization and property of PES/ micro-nano cellulose composite membrane material].

    Science.gov (United States)

    Tang, Huan-Wei; Zhang, Li-Ping; Li, Shuai; Zhao, Guang-Jie; Qin, Zhu; Sun, Su-Qin

    2010-03-01

    In the present paper, the functional groups of PES/micro-nano cellulose composite membrane materials were characterized by Fourier transform infrared spectroscopy (FTIR). Also, changes in crystallinity in composite membrane materials were analyzed using X-ray diffraction (XRD). The effects of micro-nano cellulose content on hydrophilic property of composite membrane material were studied by measuring hydrophilic angle. The images of support layer structure of pure PES membrane material and composite membrane material were showed with scanning electron microscope (SEM). These results indicated that in the infrared spectrogram, the composite membrane material had characteristic peaks of both PES and micro-nano cellulose without appearance of other new characteristics peaks. It revealed that there were no new functional groups in the composite membrane material, and the level of molecular compatibility was achieved, which was based on the existence of inter-molecular hydrogen bond association between PES and micro-nano cellulose. Due to the existence of micro-nano cellulose, the crystallinity of composite membrane material was increased from 37.7% to 47.9%. The more the increase in micro-nano cellulose mass fraction, the better the van de Waal force and hydrogen bond force between composite membrane material and water were enhanced. The hydrophilic angle of composite membrane material was decreased from 55.8 degrees to 45.8 degrees and the surface energy was raised from 113.7 to 123.5 mN x m(-2). Consequently, the hydrophilic property of composite membrane material was improved. The number of pores in the support layer of composite membrane material was lager than that of pure PES membrane. Apparently, pores were more uniformly distributed.

  4. Improvement of performance of ultra-high performance concrete based composite material added with nano materials

    Directory of Open Access Journals (Sweden)

    Pang Jinchang

    2016-03-01

    Full Text Available Ultra-high performance concrete (UHPC, a kind of composite material characterized by ultra high strength, high toughness and high durability. It has a wide application prospect in engineering practice. But there are some defects in concrete. How to improve strength and toughness of UHPC remains to be the target of researchers. To obtain UHPC with better performance, this study introduced nano-SiO2 and nano-CaCO3 into UHPC. Moreover, hydration heat analysis, X-Ray Diffraction (XRD, mercury intrusion porosimetry (MIP and nanoindentation tests were used to explore hydration process and microstructure. Double-doped nanomaterials can further enhance various mechanical performances of materials. Nano-SiO2 can promote early progress of cement hydration due to its high reaction activity and C-S-H gel generates when it reacts with cement hydration product Ca(OH2. Nano-CaCO3 mainly plays the role of crystal nucleus effect and filling effect. Under the combined action of the two, the composite structure is denser, which provides a way to improve the performance of UHPC in practical engineering.

  5. Nano-Textured Fiber Coatings for Energy Absorbing Polymer Matrix Composite Materials

    Science.gov (United States)

    2004-12-01

    NANO-TEXTURED FIBER COATINGS FOR ENERGY ABSORBING POLYMER MATRIX COMPOSITE MATERIALS R. E. Jensen and S. H. McKnight Army Research Laboratory...Textured Fiber Coatings For Energy Absorbing Polymer Matrix Composite Materials 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

  6. Preparation and characterization of nano hydroxyapatite/polymeric composites materials. Part I

    Energy Technology Data Exchange (ETDEWEB)

    Mohamed, Khaled R., E-mail: kh_rezk1966@yahoo.com [Biomaterials Dept., National Research Centre, Dokki, Cairo (Egypt); El-Rashidy, Zenab M. [Biomaterials Dept., National Research Centre, Dokki, Cairo (Egypt); Salama, Aida A. [Biophysics Dept., Faulty of Science, El-Azhar Univ., Cairo (Egypt)

    2011-10-17

    Highlights: {yields} The formation and coating of CHA increased by increasing polymer content. {yields} The size of the prepared CHA was within nano-range scale. {yields} The composites had homogeneity and CHA formed within the polymeric matrix. - Abstract: The present study is focused on preparation of nano composite materials and the effect of citric acid on their different properties. The formation of nano HA and its interaction with chitosan (C), gelatin (G) polymers and citric acid (CA) materials were studied. The Fourier Transformed Infrared Spectroscopy (FT-IR), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), transmission electron microscope (TEM), and scanning electron microscope (SEM) were used to characterize these composite materials. The compressive strength (CS) was also measured to know the reinforcement of the prepared composites. The results show that carboxylic and amino groups play crucial role for HA formation on chitosan-gelatin polymeric matrix in the presence of citric acid (CA). The formation of nano HA particles and its average size of crystallite is increased with increase of CG content and decreased with addition of CA. Also, the HA formation and binding strength between its particles are improved into the composites especially with CA. The nano-composites containing the best ratio of nHA (70%) with CA (0.2 M) are promising for medical applications in the future.

  7. Characterization and the Pattern of Surfaces of Sealant with nano size Composite Materials

    Science.gov (United States)

    Quddos, A.; Samtio, N. H.; Syed, A. M.

    2013-06-01

    Nano composite sealant is low viscosity, room temperature cured, opaque and flowable nature. They have variety of uses such as potting, pressure sealant and shock resistant. Most important factor influencing use of fillers in polymer composites is their ability to effectively transfer the applied load in the matrix. The effective utilization of fillers in composites for structural applications depends strongly on the ability to disperse the nano fillers homogeneously in the matrix without damaging them. R-Belite supper epoxy adhesive (RBSEA) were formulated with different nano fillers (KCl, Al2O3, ZrO2, SiO2, ZrO2) at room temperature. The composite were prepared with the 0.02 to 0.10 weight ratios to promote the nucleation of the nanoparticles in the applied sealant. Two main problems which arise in improving the properties are poor dispersion of the fillers in the composite and weak bonding between nano fillers and the matrix. These problems are solved by mechanical and chemical means. It was observed that mechanical properties like tensile strength, elongation hardness etc and thermal properties were also improved with incorporation of nanofillers in the working applied polymer matrix. The dispersion of nano fillers in polymer matrix is studied by Scanning electron microscopy (SEM). The results confirm the presence of nanomaterial in RBSEA/fillers nanocomposites. SEM is also used to characterize the pattern of surfaces with nano size composite materials.

  8. Properties of the chalcogenide–carbon nano tubes and graphene composite materials

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Abhay Kumar, E-mail: abhaysngh@rediffmail.com [Department of Physics, Indian Institute of Science, Bangalore 560012 (India); Department of Electronics Engineering, Incheon National University, Incheon 406-772 (Korea, Republic of); Department of Physics, Incheon National University, Incheon 406-772 (Korea, Republic of); Kim, JunHo [Department of Physics, Incheon National University, Incheon 406-772 (Korea, Republic of); Park, Jong Tae [Department of Electronics Engineering, Incheon National University, Incheon 406-772 (Korea, Republic of); Sangunni, K.S. [Department of Physics, Indian Institute of Science, Bangalore 560012 (India)

    2015-04-05

    Highlights: • Chalcogenides. • Melt quenched. • Composite materials. • Multi walled carbon nano tubes. • Bilayer graphene. - Abstract: Composite can deliver more than the individual elemental property of the material. Specifically chalcogenide- multi walled carbon nano tubes and chalcogenide- bilayer graphene composite materials could be interesting for the investigation, which have been less covered by the investigators. We describe micro structural properties of Se{sub 55}Te{sub 25}Ge{sub 20,} Se{sub 55}Te{sub 25}Ge{sub 20} + 0.025% multi walled carbon nano tubes and Se{sub 55}Te{sub 25}Ge{sub 20} + 0.025% bilayer graphene materials. This gives realization of the alloying constituents inclusion/or diffusion inside the multi walled carbon nano tubes and bilayer graphene under the homogeneous parent alloy configuration. Raman spectroscopy, X-ray photoelectron spectroscopy, UV/Visible spectroscopy and Fourier transmission infrared spectroscopy have also been carried out under the discussion. A considerable core energy levels peak shifts have been noticed for the composite materials by the X-ray photoelectron spectroscopy. The optical energy band gaps are measured to be varied in between 1.2 and 1.3 eV. In comparison to parent (Se{sub 55}Te{sub 25}Ge{sub 20}) alloy a higher infrared transmission has been observed for the composite materials. Subsequently, variation in physical properties has been explained on the basis of bond formation in solids.

  9. Synthesis of NiMnO3/C nano-composite electrode materials for electrochemical capacitors.

    Science.gov (United States)

    Kakvand, Pejman; Rahmanifar, Mohammad Safi; El-Kady, Maher F; Pendashteh, Afshin; Kiani, Mohammad Ali; Hashami, Masumeh; Najafi, Mohsen; Abbasi, Ali; Mousavi, Mir F; Kaner, Richard B

    2016-08-05

    Demand for high-performance energy storage materials has motivated research activities to develop nano-engineered composites that benefit from both high-rate and high-capacitance materials. Herein, NiMnO3 (NMO) nanoparticles have been synthesized through a facile co-precipitation method. As-prepared NMO samples are then employed for the synthesis of nano-composites with graphite (Gr) and reduced graphene oxide (RGO). Various samples, including pure NMO, NMO-graphite blend, as well as NMO/Gr and NMO/RGO nano-composites have been electrochemically investigated as active materials in supercapacitors. The NMO/RGO sample exhibited a high specific capacitance of 285 F g(-1) at a current density of 1 A g(-1), much higher than the other samples (237 F g(-1) for NMO/Gr, 170 F g(-1) for NMO-Gr and 70 F g(-1) for NMO). Moreover, the NMO/RGO nano-composite has shown excellent cycle stability with a 93.5% capacitance retention over 1000 cycles at 2 A g(-1) and still delivered around 87% of its initial capacitance after cycling for 4000 cycles. An NMO/RGO composite was assessed in practical applications by assembling NMO/RGO//NMO/RGO symmetric devices, exhibiting high specific energy (27.3 Wh kg(-1)), high specific power (7.5 kW kg(-1)), and good cycle stability over a broad working voltage of 1.5 V. All the obtained results demonstrate the promise of NMO/RGO nano-composite as a high-performance electrode material for supercapacitors.

  10. Fast Reacting Nano Composite Energetic Materials: Synthesis and Combustion Characterization

    Science.gov (United States)

    2015-08-24

    Skofronick and Martin 1995). 6 | P a g e Bockmon et al. showed that when the size of the reactants is reduced from micron to nano scale, reaction... Martin . "Oxidation behavior of aluminum nanopawders." Journal of Vacuum Science and Technology 13, no. 3 (1995): 1178-1183. B. Dickiki, S. Dean, M...Propulsion and Power 27 (2011): 1079-1087. D. Weibel, A. Michels, A. Feil , L. Amaral, S. Teixeria, F. Horowitz. "Adjustable hydrophobicity of Al

  11. IMPROVING AIRCRAFT PARTS DUE TO USING NANO-COMPOSITE AND MICRO-COMPOSITE MATERIAL

    Directory of Open Access Journals (Sweden)

    Hassany Merhdad Boer

    2017-01-01

    Full Text Available In this paper it is investigated how to make composite carbon nanofiber/ epoxy resin and carbon micro-fiber / epoxy resin. Also, these materials' features are compared and it is shown how effective and benefitial are the received products containing carbon nano- and micro-fibers.In this study, epoxy composites were prepared in order to improve their mechanical and electrical properties. Ergo, carbon nanofibers and carbon microfibers were used as fillers. On the one hand, purchased microfibers were incorporatedinto the epoxy resin to produce epoxy/carbon microfiber composites via mechanical mixing at 1800 rpm in different concentrations (0.0125, 0.0225, 0.05, and 0.1.On the other hand, carbon nanofibers were prepared via electrospining method at room temperature, then epoxy/carbon nanofiber nanocomposites were prepared at mixing temperature of 60 °C at 1200 rpm at different concentrations (0.0125, 0.05, and 0.1.Morphology of samples was investigated via Field Emission Scanning Electron Microscopy (FESEM. Mechanical properties of samples were investigated via tensile and bending tests. Tensile test results revealed that incorporation of 0.0125 wt% carbon naofibers increased the epoxy resins modulus about 200%. Bending strength of sample containing 0.1wt% carbon microfibers had the most increment (from 20 to 100 MPa.

  12. The Tribological Efficiency and the Mechanism of Action of Nano-Porous Composition Base Brake Lining Materials

    Science.gov (United States)

    Kutelia, E. R.; Gventsadze, D. I.; Eristavil, B. G.; Maisuradze, N. I.; Tsurtsumia, O. O.; Gventsadze, L. D.; Olofsson, U.; Wahlström, J.; Olander, L.

    2011-12-01

    Based on the comparative analysis of the experimental values determined for the tribological parameters for the three novel nano-porous composition base and two conventional brake lining materials while friction with the grey cast iron disc, it was shown the considerable high tribological efficiency of the novel nano-porous composition base lining materials in comparison with the conventional (from EU and USA market) brake lining materials. The explanation is given to the action mechanism of nano-porous composition base brake lining material and its tribological efficiency basing on the "triple phase" tribo-pair model.

  13. Nano-sized aerosol classification, collection and analysis--method development using dental composite materials.

    Science.gov (United States)

    Bogdan, Axel; Buckett, Mary I; Japuntich, Daniel A

    2014-01-01

    This article presents a methodical approach for generating, collecting, and analyzing nano-size (1-100 nm) aerosol from abraded dental composite materials. Existing aerosol sampling instruments were combined with a custom-made sampling chamber to create and sample a fresh, steady-state aerosol size distribution before significant Brownian coagulation. Morphological, size, and compositional information was obtained by Transmission Electron Microscopy (TEM). To create samples sizes suitable for TEM analysis, aerosol concentrations in the test chamber had to be much higher than one would typically expect in a dental office, and therefore, these results do not represent patient or dental personnel exposures. Results show that nano-size aerosol was produced by the dental drill alone, with and without cooling water drip, prior to abrasion of dental composite. During abrasion, aerosol generation seemed independent of the percent filler load of the restorative material and the operator who generated the test aerosol. TEM investigation showed that "chunks" of filler and resin were generated in the nano-size range; however, free nano-size filler particles were not observed. The majority of observed particles consisted of oil droplets, ash, and graphitic structures.

  14. Influence of active nano particle size and material composition on multiple quantum emitter enhancements: Their Enhancement and Jamming Effects

    DEFF Research Database (Denmark)

    Arslanagic, Samel; Ziolkowski, Richard W.

    2014-01-01

    of a gain-impregnated silica nano-core covered with a nano-shell of a specific plasmonic material. Attention is devoted to the influence of the over-all size of these particles and their material composition on the obtained levels of active enhancement or jamming. Silver, gold and copper are employed...... levels are most notable when the nano-shell is gold....

  15. The diametral tensile strength and hydrostability of polymer-ceramic nano-composite (pcnc) material prototypes

    Science.gov (United States)

    Yepez, Johanna

    Statement of the problem: There is a weak connection between the filler and the resin matrix of dental composites caused primarily by hydrolysis of silane coupling agent, therefore, jeopardizing the mechanical properties of the dental restorations. Purpose: The purpose of this study was to compare the diametral tensile strength (DTS) of a nano-mechanically bonded polymer ceramic nano composite (pcnc) versus the chemically bonding prototype polymer ceramic nano composite (pcnc) fabricated by using hydrolytically stable interphase. Materials and Methods: Composites were made with 60wt % filler, 38% triethyleneglycol dimethacrylate (TEDGMA), 1% camphorquinone (CQ) and 1% 2-(dimethylamino) ethyl methacrylate (DMAEMA). Tests for DTS were performed using a universal testing machine. The disk-shaped specimens were loaded in compression between two supporting plates at a crosshead speed of 0.5 mm/min until fracture. The samples, measuring 3 mm in height and 6 mm in diameter, were produced in a round stainless steel (SS) mold. A total of 144 samples were created. Groups of 48 samples were made for each of three different fillers. Specimens were soaked in artificial saliva at 37° for four time periods, dry(t=0), 1 day, 7 days, 28 days). At the end of each soaking time DTS tests were performed. Results: There where statistically significant differences in the DTS between the filler groups and the soaking times (p=composition and bonding interphase of resin base composites promise improvements of mechanical properties, decreasing the incidence of clinical failure of posterior composite restorations, hence resulting in a more ideal restorative material for use in posterior segment. The results of this investigation showed that the deficiency of hydrostability in dental composites is a detrimental factor in the mechanical behavior. The silanation of the filler particles have a positive influence on the mechanical properties of dental composites but the hydrolysis of the silane

  16. Nano Materials

    Science.gov (United States)

    2007-03-01

    hard coatings: – Molecular sieves – Lubricant additive to engine oil – Reinforcing fillers for plastics and rubbers – Chromatographic carriers 32...nanomaterials, November 2006 NanoCeramics applications (PlasmaChem) • Lapping and polishing • Low temperature sintering • New Ceramic alloys • Ceramic-metal...Nanotechnology lectures: Henne van Heeren, enablingMNT, nanomaterials, November 2006 MoS2 nanospheres (1) (Apnano) • Common solid lubricants are layered

  17. Preparation and characterization of chitosan/nano-hydroxyapatite composite used as bone substitute materials

    Institute of Scientific and Technical Information of China (English)

    Zhang Li; Li Yubao; Zhou Gang; Wu Lan; Mu Yuanhua; Yang Zheng

    2007-01-01

    Chitosan/nano-hydroxyapatite composites with different weight ratios were prepared through a co-precipitation method using Ca(OH)2, H3PO4 and chitosan as starting materials. The properties of these composites were characterized by means of TEM, IR, XRD, TGA, bum-out tests and universal matertial testing machine. The results showed that the HA synthesized here was poorly crystalline carbonated nanometer crystals and dispersed uniformly in chitosan phase and there was no phase-separation between the two phases. The addition of n-HA resulted in a decrease of decomposing temperature of chitosan. Because of the interactions between chitosan and n-HA, the mechanical properties of these composites were improved, and the maximum value of the compressive strength was measured to be about 120MPa corresponding to the chitosan/n-HA composite with a weight ratio of 30/70.

  18. Polymer-clay Nano Composites

    Directory of Open Access Journals (Sweden)

    R. S. Chauhan

    2006-10-01

    Full Text Available Nano has now become a theme in almost all the established discipline. The confluence ofinnovative methodologies, sophisticated characterisation techniques, and potential technologicalutility has resulted in intense research activity in the field of polymer nano composites. Polymercomposites made out of nano materials display unique properties in terms of improved tensilestrength, flexibility, and flexural endurance. The paper discusses the development of polymerclaynano composites, both from the conceptual point of view as well as practical methods forthe synthesis of nano composites. These are monomer intercalation, monomer modification,common solvent, and melt-intercalation methods. Various models have been discussed thatdescribe improvements in mechanical and barriers properties due to the incorporation of nanomaterials. Ongoing R&D work in the two DRDO laboratories on the development of nanocomposites has been briefly mentioned. The emerging use of polymer-nano composites has alsobeen described.

  19. High-pressure synthesis of a polyethylene/zeolite nano-composite material.

    Science.gov (United States)

    Santoro, Mario; Gorelli, Federico A; Bini, Roberto; Haines, Julien; van der Lee, Arie

    2013-01-01

    Meso/micro-porous solids, such as zeolites, are complex materials used in an impressive range of applications. Here we photo-polymerized ethylene using non-catalytic high-pressure techniques at 0.5-1.5 GPa under ultraviolet (351-364 nm) irradiation on a sub-nanometre scale in the channels of a pure SiO2 zeolite, silicalite, to obtain a unique nano-composite material with drastically modified mechanical properties. The structure obtained contains single polyethylene chains, which adapt very well to the confining channels as shown by optical spectroscopy and X-ray diffraction. The formation of this nano-composite results in significant increases in bulk modulus and density, and the thermal expansion coefficient changes sign from negative to positive with respect to silicalite. Mechanical properties may thus be tuned by varying the amount of polymerized ethylene. Our findings could allow the high-pressure, catalyst-free synthesis of a unique generation of technological, functional materials based on simple hydrocarbons polymerized in confining meso/micro-porous solids.

  20. High pressure synthesis of novel, zeolite based nano-composite materials

    Science.gov (United States)

    Santoro, Mario

    2013-06-01

    Meso/micro-porous solids such as zeolites are complex materials exhibiting an impressive range of applications, including molecular sieve, gas storage, catalysis, electronics and photonics. We used these materials, particularly non catalytic zeolites in an entirely different fashion. In fact, we performed high pressure (0.5-30 GPa) chemical reactions of simple molecules on a sub-nanometer scale in the channels of a pure SiO2 zeolite, silicalite to obtain unique nano-composite materials with drastically modified physical and chemical properties. Our material investigations are based on a combination of X-ray diffraction and optical spectroscopy techniques in the diamond anvil cell. I will first briefly show how silicalite can be easily filled by simple molecules such as Ar, CO2 and C2H4 among others from the fluid phase at high pressures, and how this efficient filling removes the well known pressure induced amorphization of the silica framework (Haines et al., JACS 2010). I will then present on a silicon carbonate crystalline phase synthesized by reacting silicalite and molecular CO2 that fills the nano-pores, at 18-26 GPa and 600-980 K; after the synthesis the compound is temperature quenched and it results to be slightly metastable at room conditions (Santoro et al., PNAS 2011). On the other hand, a stable at room condition spectacular crystalline nano-composite is obtained by photo-polymerizing ethylene at 0.5-1.5 GPa under UV (351-364 nm) irradiation in the channels of silicalite (Santoro et al., Nat. Commun, in press 2013). For this composite we obtained a structure with single polyethylene chains adapting very well to the confining channels, which results in significant increases in bulk modulus and density, and the thermal expansion coefficient changes sign from negative to positive with respect to the original silicalite host. Mechanical properties may thus be tuned by varying the amount of polymerized ethylene. We then think our findings could allow the

  1. Fabrication and mechanical evaluation of hydroxyapatite/oxide nano-composite materials.

    Science.gov (United States)

    Mohamed, Khaled R; Beherei, Hanan H; El Bassyouni, Gehan T; El Mahallawy, Nahed

    2013-10-01

    In the current study, the semiconducting metal oxides such as nano-ZnO and SiO2 powders were prepared via sol-gel technique and conducted on nano-hydroxyapatite (nHA) which was synthesized by chemical precipitation. The properties of fabricated nano-structured composites containing different ratios of HA, ZnO and SiO2 were examined using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscope (SEM) and transmission electron microscope (TEM) techniques. The effect of the variation of ratios between the three components on mechanical, microstructure and in-vitro properties was assessed to explore the possibility of enhancing these properties. The results proved that the mechanical properties exhibited an increment with increasing the ZnO content at the extent of HA. In-vitro study proved the formation and nucleation of apatite onto the surface of the fabricated composites after one week of immersion. It is concluded that HA composites containing SiO2 or SiO2/ZnO content had a suitable mechanical properties and ability to form apatite particles onto the composite surface. Based on bioactivity behavior, Si-HA is more bioactive than pure hydroxyapatite and nano-arrangements will provide an interface for better bone formation. Therefore, these nano-composites will be promising as bone substitutes especially in load bearing sites.

  2. Electrochemistry, a technique to prepare redox nano-structured composite materials (polymer/nano-particles) - Characterizations - Applications; L'electrochimie, un outil pour elaborer des materiaux composites redox nanostructures (polymere/nanoparticules) - Caracterisations - Applications

    Energy Technology Data Exchange (ETDEWEB)

    Chardon-Noblat, S. [Grenoble-1 Univ. Joseph Fourier, Lab. d' Electrochimie Organique et de Photochimie Redox, UMR 5630, Institut de Chimie Moleculaire de Grenoble, FR CNRS 2607, 38 - Grenoble (France)

    2006-07-01

    In this work is presented at first the preparation by an electrochemical way of bi functional nano-structured composite materials. It is shown that with the pulsed electrolysis techniques, it is possible to obtain metallic particles whose size and organization are controlled at the nano-scopic scale in redox matrices. Then, are presented the physico-chemical characterizations of these nano-objects (coupled in situ or ex situ at the electrochemistry). The first results relative to the catalytic activation of CO{sub 2} with these materials used as composite cathodes are indicated. (O.M.)

  3. The Properties of Nano TiO2-Geopolymer Composite as a Material for Functional Surface Application

    Directory of Open Access Journals (Sweden)

    Syamsidar D.

    2017-01-01

    Full Text Available The aim of this study is to examine the properties of Nano TiO2-geopolymer as a material for functional surface applications such as walls, floors, bench top, arts and decoration materials. Class-C fly ash and metakaolin were used as raw materials to produce geopolymers pastes (binder. Geopolymers were synthesized through alkali activation method cured at 50°C for 2 hours using molar oxide ratios of SiO2/Al2O3 = 3.0, Na2O/SiO2 = 0.2, and H2O/Na2O = 10. Nano TiO2 was added into geopolymers paste at different concentration namely 0 wt%, 5wt%, 10wt% and 15wt % relative the weight of fly ash or metakaolin. The measurements were commenced after the samples aged 7 days. The samples made from fly ash were immersed in 1 M H2SO4 solution for 3 days for acid resistance examination. The self-cleaning properties of the composites were observed by immersing the sample into red clays solution. The X-Ray Diffraction (XRD was performed to examine the structure and phase of the samples before and after acid resistance measurement. Scanning Electron Microscopy (SEM was performed to examine the surface morphology of the resulting composites. The measurements results showed that Nano TiO2–geopolymers composite can be applied as functionally surface materials.

  4. Applications of nano-composite materials for improving the performance of anode-supported electrolytes of SOFCs

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jong-Jin; Moon, Hwan; Park, Hae-Gu; Yoon, Dae Il; Hyun, Sang-Hoon [School of Advanced Materials Science and Engineering, Yonsei Univ., Seoul 120-749 (Korea)

    2010-01-15

    In order to improve the performance of the anode-supported electrolyte of solid oxide fuel cells (SOFCs), the anode electrode is modified by inserting an anode functional layer of nano-composite powders between a Ni-YSZ electrode and YSZ electrolyte. The NiO-YSZ nano-composite powders are fabricated by coating nano-sized Ni and YSZ particles on the YSZ core particle by the Pechini process. The reduction of the polarization resistance of a single cell that is applied to the anode functional layer is attributed to the increasing reaction of three-phase boundaries (TPBs) within the layer and the micro-structured uniformity in the electrode. Two methods were used, namely tape-casting/dip-coating and tape-casting/co-firing, for studying the performance. It can be concluded that the cell with an anode functional layer thickness (15-20 {mu}m) and a microstructure of NiO-YSZ nano-composite materials which was fabricated by the tape-casting/dip-coating method improved the output power (to 1.3 W cm{sup -2}) at 800 C using hydrogen as fuel and air as an oxidant. (author)

  5. Low temperature synthesis of diamond-based nano-carbon composite materials with high electron field emission properties

    Energy Technology Data Exchange (ETDEWEB)

    Saravanan, A.; Huang, B. R. [Graduate Institute of Electro-Optical Engineering and Department of Electronic Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Yeh, C. J.; Leou, K. C. [Department of Engineering and System Science, National Tsing Hua University, Hsinchu 300, Taiwan (China); Lin, I. N., E-mail: inanlin@mail.tku.edu.tw [Department of Physics, Tamkang University, Tamsui 251, Taiwan (China)

    2015-06-08

    A diamond-based nano-carbon composite (d/NCC) material, which contains needle-like diamond grains encased with the nano-graphite layers, was synthesized at low substrate temperature via a bias enhanced growth process using CH{sub 4}/N{sub 2} plasma. Such a unique granular structure renders the d/NCC material very conductive (σ = 714.8 S/cm), along with superior electron field emission (EFE) properties (E{sub 0} = 4.06 V/μm and J{sub e} = 3.18 mA/cm{sup 2}) and long lifetime (τ = 842 min at 2.41 mA/cm{sup 2}). Moreover, the electrical conductivity and EFE behavior of d/NCC material can be tuned in a wide range that is especially useful for different kind of applications.

  6. RE/ZrO{sub 2} (RE = Sm, Eu) composite oxide nano-materials: Synthesis and applications in photocatalysis

    Energy Technology Data Exchange (ETDEWEB)

    Du, Weimin, E-mail: duweimin75@gmail.com [College of Chemistry and Chemical Engineering, Anyang Normal University, Anyang, Henan 455002 (China); Zhu, Zhaoqiang [College of Chemistry and Chemical Engineering, Anyang Normal University, Anyang, Henan 455002 (China); College of Chemistry and Molecular Engineering, Zhengzhou University, Zhengzhou, Henan 450001 (China); Zhang, Xiaofen; Wang, Dacheng; Liu, Donghe [College of Chemistry and Chemical Engineering, Anyang Normal University, Anyang, Henan 455002 (China); Qian, Xuefeng [School of Chemistry and Chemical Technology, Shanghai Jiao Tong University, Shanghai 200240 (China); Du, Jimin, E-mail: djm@aynu.edu.cn [College of Chemistry and Chemical Engineering, Anyang Normal University, Anyang, Henan 455002 (China)

    2013-10-15

    Graphical abstract: - Highlights: • RE/ZrO{sub 2} (RE = Sm, Eu) nano-materials have been successfully synthesized. • Defect and electron structures determine the absorption properties on visible light. • Nano-sized Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} has good visible-light-responsive photocatalytic activities. • In the future, it can be used in wastewater treatment and environmental protection. - Abstract: Zirconia modified by Samarium/Europium, RE/ZrO{sub 2} (RE = Sm, Eu), composite oxide nano-materials have been successfully synthesized by improved sol–gel method. Characterization results show that X-ray diffraction (XRD) peaks of products gradually shift to the lower angle with the increase of rare earth which implies that the lattice distances of RE/ZrO{sub 2} nano-materials are gradually enlarged. Moreover, the molar ratios between zirconium and rare earth are consistent with the chemical formula and both of them are uniformly distributed in samples. Optical properties indicate that defect structures and electron configurations of RE/ZrO{sub 2} (RE = Sm, Eu) with single phase determine their absorption properties on visible light. Photocatalytic experiments indicate Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} nano-crystals have excellent visible-light-responsive photocatalytic activities on Methylene blue and Rhodamine B which results from the special defect structure, suitable electronic configuration, and larger specific surface area. It follows that Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} nano-crystals are new visible-light-responsive photocatalysts which can be applied in dye wastewater treatment and environmental protection in the future.

  7. High performance nano-composite technology development

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Whung Whoe; Rhee, C. K.; Kim, S. J.; Park, S. D. [KAERI, Taejon (Korea, Republic of); Kim, E. K.; Jung, S. Y.; Ryu, H. J. [KRICT, Taejon (Korea, Republic of); Hwang, S. S.; Kim, J. K.; Hong, S. M. [KIST, Taejon (Korea, Republic of); Chea, Y. B. [KIGAM, Taejon (Korea, Republic of); Choi, C. H.; Kim, S. D. [ATS, Taejon (Korea, Republic of); Cho, B. G.; Lee, S. H. [HGREC, Taejon (Korea, Republic of)

    1999-06-15

    The trend of new material development are being to carried out not only high performance but also environmental attraction. Especially nano composite material which enhances the functional properties of components, extending the component life resulting to reduced the wastes and environmental contamination, has a great effect on various industrial area. The application of nano composite, depends on the polymer matrix and filler materials, has various application from semiconductor to medical field. In spite of nano composite merits, nano composite study are confined to a few special materials as a lab, scale because a few technical difficulties are still on hold. Therefore, the purpose of this study establishes the systematical planning to carried out the next generation projects on order to compete with other countries and overcome the protective policy of advanced countries with grasping over sea's development trends and our present status. (author).

  8. Nano semiconducting materials

    CERN Document Server

    Saravanan, R

    2016-01-01

    The main focus of the present book is the characterization of a number of nano-semiconducting materials, using such techniques as powder X-ray diffraction, UV-visible spectrophotometry, Raman spectrometry, scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometry. The materials studied include ZnS, TiO2, NiO, Ga doped ZnO, Mn doped SnO2, Mn doped CeO2 and Mn doped ZrO2.

  9. Nano-engineered Multiwall Carbon Nanotube-copper Composite Thermal Interface Material for Efficient Heat Conduction

    Science.gov (United States)

    Ngo, Quoc; Cruden, Brett A.; Cassell, Alan M.; Sims, Gerard; Li, Jun; Meyyappa, M.; Yang, Cary Y.

    2005-01-01

    Efforts in integrated circuit (IC) packaging technologies have recently been focused on management of increasing heat density associated with high frequency and high density circuit designs. While current flip-chip package designs can accommodate relatively high amounts of heat density, new materials need to be developed to manage thermal effects of next-generation integrated circuits. Multiwall carbon nanotubes (MWNT) have been shown to significantly enhance thermal conduction in the axial direction and thus can be considered to be a candidate for future thermal interface materials by facilitating efficient thermal transport. This work focuses on fabrication and characterization of a robust MWNT-copper composite material as an element in IC package designs. We show that using vertically aligned MWNT arrays reduces interfacial thermal resistance by increasing conduction surface area, and furthermore, the embedded copper acts as a lateral heat spreader to efficiently disperse heat, a necessary function for packaging materials. In addition, we demonstrate reusability of the material, and the absence of residue on the contacting material, both novel features of the MWNT-copper composite that are not found in most state-of-the-art thermal interface materials. Electrochemical methods such as metal deposition and etch are discussed for the creation of the MWNT-Cu composite, detailing issues and observations with using such methods. We show that precise engineering of the composite surface affects the ability of this material to act as an efficient thermal interface material. A thermal contact resistance measurement has been designed to obtain a value of thermal contact resistance for a variety of different thermal contact materials.

  10. Railgun Application for High Energy Impact Testing of Nano-Reinforced Kevlar-Based Composite Materials

    Science.gov (United States)

    Micheli, D.; Vricella, A.; Pastore, R.; Morles, R. B.; Marchetti, M.

    2013-08-01

    An advanced electromagnetic accelerator, called railgun, has been assembled and tuned in order to perform high energy impact test on layered structures. Different types of layered composite materials have been manufactured and characterized in terms of energy absorbing capability upon impact of metallic bullets fired at high velocity. The composite materials under testing are manufactured by integrating several layers of Kevlar fabric and carbon fiber ply within a polymeric matrix reinforced by carbon nanotubes at 1% of weight percentage. The experimental results show that the railgun-device is a good candidate to perform impact testing of materials in the space debris energy range, and that carbon nanotubes may enhance, when suitably coupled to the composite's matrix, the excellent antiballistic properties of the Kevlar fabrics.

  11. Vertically aligned CNT-Cu nano-composite material for stacked through-silicon-via interconnects.

    Science.gov (United States)

    Sun, Shuangxi; Mu, Wei; Edwards, Michael; Mencarelli, Davide; Pierantoni, Luca; Fu, Yifeng; Jeppson, Kjell; Liu, Johan

    2016-08-19

    For future miniaturization of electronic systems using 3D chip stacking, new fine-pitch materials for through-silicon-via (TSV) applications are likely required. In this paper, we propose a novel carbon nanotube (CNT)/copper nanocomposite material consisting of high aspect ratio, vertically aligned CNT bundles coated with copper. These bundles, consisting of hundreds of tiny CNTs, were uniformly coated by copper through electroplating, and aspect ratios as high as 300:1 were obtained. The resistivity of this nanomaterial was found to be as low as ∼10(-8) Ω m, which is of the same order of magnitude as the resistivity of copper, and its temperature coefficient was found to be only half of that of pure copper. The main advantage of the composite TSV nanomaterial is that its coefficient of thermal expansion (CTE) is similar to that of silicon, a key reliability factor. A finite element model was set up to demonstrate the reliability of this composite material and thermal cycle simulations predicted very promising results. In conclusion, this composite nanomaterial appears to be a very promising material for future 3D TSV applications offering both a low resistivity and a low CTE similar to that of silicon.

  12. 纳米复合包装材料的研究与应用进展%Study and Application Progress of Nano-composite Packaging Materials

    Institute of Scientific and Technical Information of China (English)

    孙新; 黄俊彦; 吴双岭; 孙成伦

    2012-01-01

    综述了纳米复合包装材料的特点及其在食品包装领域的应用,介绍了纳米复合包装材料特有的保鲜性、抗菌性、高阻隔性等性能的研究和应用现状,并对纳米复合包装材料的安全性进行了分析评价.%The characteristics of nano-composite packaging materials and its application in food packaging fields were reviewed; the research progress of performances of nano-composite packaging materials, such as preservation performance, antibiotic property and high barrier property, and its application situation were introduced. The security of nano-composite packaging materials were analyzed and evaluated.

  13. Bioactivity and degradability of hybrids nano-composites materials with great application as bone tissue substitutes

    Energy Technology Data Exchange (ETDEWEB)

    Sánchez-Téllez, D.A.; Téllez-Jurado, L.; Chávez-Alcalá, J.F., E-mail: fchaveza@hotmail.com

    2014-12-05

    Highlights: • pH has an effect on the degradation process of the hybrid materials. • Weight loss depends on the change of pH during the degradation process. • Bioactivity in the materials is strongly related to calcium and pH. - Abstract: In this work, hybrids with great application as bioactive materials having different compositions based on siloxane network were prepared. In vitro bioactivity and in vitro degradability tests were carried out in the materials by soaking them into simulated body fluid (SBF) and into phosphate buffer solution (PBS) to prove their apatite-forming ability and to show their degradation process, respectively. In both in vitro tests, measurements of pH and loss weight were made to observe bioactivity and degradation processes. To prove growth of HA, the materials were characterized through X-ray diffraction, infrared spectroscopy, and scanning electron microscopy. The results showed that some samples have better bioactivity than others. It was found that the incorporation of CaO component into the network of the materials results in an increase of the apatite-forming ability in SBF. Moreover, during the degradation tests, all the samples presented weight loss, especially the ones that contain CaO.

  14. A nano-hydroxyapatite--pullulan/dextran polysaccharide composite macroporous material for bone tissue engineering.

    Science.gov (United States)

    Fricain, Jean Christophe; Schlaubitz, Silke; Le Visage, Catherine; Arnault, Isabelle; Derkaoui, Sidi Mohammed; Siadous, Robin; Catros, Sylvain; Lalande, Charlotte; Bareille, Reine; Renard, Martine; Fabre, Thierry; Cornet, Sandro; Durand, Marlène; Léonard, Alain; Sahraoui, Nouredine; Letourneur, Didier; Amédée, Joëlle

    2013-04-01

    Research in bone tissue engineering is focused on the development of alternatives to allogenic and autologous bone grafts that can stimulate bone healing. Here, we present scaffolds composed of the natural hydrophilic polysaccharides pullulan and dextran, supplemented or not with nanocrystalline hydroxyapatite particles (nHA). In vitro studies revealed that these matrices induced the formation of multicellular aggregates and expression of early and late bone specific markers with human bone marrow stromal cells in medium deprived of osteoinductive factors. In absence of any seeded cells, heterotopic implantation in mice and goat, revealed that only the composite macroporous scaffold (Matrix + nHA) (i) retained subcutaneously local growth factors, including Bone Morphogenetic Protein 2 (BMP2) and VEGF165, (ii) induced the deposition of a biological apatite layer, (iii) favored the formation of a dense mineralized tissue subcutaneously in mice, as well osteoid tissue after intramuscular implantation in goat. The composite scaffold was thereafter implanted in orthotopic preclinical models of critical size defects, in small and large animals, in three different bony sites, i.e. the femoral condyle of rat, a transversal mandibular defect and a tibial osteotomy in goat. The Matrix + nHA induced a highly mineralized tissue in the three models whatever the site of implantation, as well as osteoid tissue and bone tissue regeneration in direct contact to the matrix. We therefore propose this composite matrix as a material for stimulating bone cell differentiation of host mesenchymal stem cells and bone formation for orthopedic and maxillofacial surgical applications.

  15. Conductive polymer/reduced graphene oxide/Au nano particles as efficient composite materials in electrochemical supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Shabani Shayeh, J. [Center of Excellence in Electrochemistry, University of Tehran, Tehran (Iran, Islamic Republic of); Ehsani, A., E-mail: a.ehsani@qom.ac.ir [Department of Chemistry, Faculty of Science, University of Qom, P.O. Box 37185-359, Qom (Iran, Islamic Republic of); Ganjali, M.R.; Norouzi, P. [Center of Excellence in Electrochemistry, University of Tehran, Tehran (Iran, Islamic Republic of); Endocrinology & Metabolism Research Center, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Jaleh, B. [Physics Department, Bu-Ali Sina University, Hamedan 65174 (Iran, Islamic Republic of)

    2015-10-30

    Graphical abstract: - Highlights: • PANI/rGO/AuNPs as a ternary composite synthesized by electrodeposition. • Presence of rGO/AuNPs caused increasing the stability of electrodes. • Composite represented high specific capacitance, specific power and specific energy values than PANI. - Abstract: Polyaniline/reduced graphene oxide/Au nano particles (PANI/rGO/AuNPs) as a hybrid supercapacitor were deposited on a glassy carbon electrode (GCE) by cyclic voltammetry (CV) method as ternary composites and their electrochemical performance was evaluated in acidic medium. Scanning electron micrographs clearly revealed the formation of nanocomposites on the surface of the working electrode. Scanning electron micrographs (SEM) clearly revealed the formation of nanocomposites on the surface of working electrode. Different electrochemical methods including galvanostatic charge–discharge (CD) experiments, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were carried out in order to investigate the applicability of the system as a supercapacitor. Based on the cyclic voltammogram results obtained, PANI/rGO/AuNPs gave higher specific capacitance, power and energy values than PANI at a current density of 1 mA cm{sup −2}. Specific capacitance (SC) of PANI and PANI/rGO/AuNPs electrodes calculated using CV method are 190 and 303 F g{sup −1}, respectively. The present study introduces new nanocomposite materials for electrochemical redox capacitors with advantages including long life cycle and stability due to synergistic effects of each component.

  16. Advanced Transmission Electron Microscopy Applications in Nano-Materials and Nano-Technology Developments

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Nano-technology development is nowadays a very hot topics in many research fields. Nano-materials are the foundations for developing this new technology. In order to fully understand the basic material science problems behind this topics, transmission electron microscopy (TEM) becomes the must and one of the most important technique to analyze the nano-size structure and composition using the most advanced high resolution TEM technique with nano-beam EDS and energy filter EELS to study the fine structures, crystallography, chemical composition, and optical properties of many different nano-materials in different industries applications.

  17. Advanced Transmission Electron Microscopy Applications in Nano-Materials and Nano-Technology Developments

    Institute of Scientific and Technical Information of China (English)

    KAI; J.J.

    2001-01-01

    Nano-technology development is nowadays a very hot topics in many research fields. Nano-materials are the foundations for developing this new technology. In order to fully understand the basic material science problems behind this topics, transmission electron microscopy (TEM) becomes the must and one of the most important technique to analyze the nano-size structure and composition using the most advanced high resolution TEM technique with nano-beam EDS and energy filter EELS to study the fine structures, crystallography, chemical composition, and optical properties of many different nano-materials in different industries applications.  ……

  18. Asphaltenes-based polymer nano-composites

    Science.gov (United States)

    Bowen, III, Daniel E

    2013-12-17

    Inventive composite materials are provided. The composite is preferably a nano-composite, and comprises an asphaltene, or a mixture of asphaltenes, blended with a polymer. The polymer can be any polymer in need of altered properties, including those selected from the group consisting of epoxies, acrylics, urethanes, silicones, cyanoacrylates, vulcanized rubber, phenol-formaldehyde, melamine-formaldehyde, urea-formaldehyde, imides, esters, cyanate esters, allyl resins.

  19. Composite Materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    This book deals with the mechanical and physical behavior of composites as influenced by composite geometry. "Composite Materials" provides a comprehensive introduction for researchers and students to modern composite materials research with a special emphasis on the significance of phase geometry....... The book enables the reader to a better understanding of the behavior of natural composites, improvement of such materials, and design of new materials with prescribed properties. A number of examples are presented: Special composite properties considered are stiffness, shrinkage, hygro-thermal behavior...... materials. Numerical procedures are outlined which facilitate the practical analysis of any feature considered in this book. Examples are presented which illustrate the analysis of well-known materials such as concrete, hardening cement paste, ceramics, tile, wood, impregnated and reinforced materials...

  20. Enhancement in biological response of Ag-nano composite polymer membranes using plasma treatment for fabrication of efficient bio materials

    Science.gov (United States)

    Agrawal, Narendra Kumar; Sharma, Tamanna Kumari; Chauhan, Manish; Agarwal, Ravi; Vijay, Y. K.; Swami, K. C.

    2016-05-01

    Biomaterials are nonviable material used in medical devices, intended to interact with biological systems, which are becoming necessary for the development of artificial material for biological systems such as artificial skin diaphragm, valves for heart and kidney, lenses for eye etc. Polymers having novel properties like antibacterial, antimicrobial, high adhesion, blood compatibility and wettability are most suitable for synthesis of biomaterial, but all of these properties does not exist in any natural or artificial polymeric material. Nano particles and plasma treatment can offer these properties to the polymers. Hence a new nano-biomaterial has been developed by modifying the surface and chemical properties of Ag nanocomposite polymer membranes (NCPM) by Argon ion plasma treatment. These membranes were characterized using different techniques for surface and chemical modifications occurred. Bacterial adhesion and wettability were also tested for these membranes, to show direct use of this new class of nano-biomaterial for biomedical applications.

  1. Processing and characterization of an Al{sub 2}O{sub 3}/WC/TiC micro- nano-composite ceramic tool material

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Jun, E-mail: zhaojun@sdu.edu.cn [Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061 (China); Yuan Xunliang [Seco Tools (Shanghai) Co. Ltd., Shanghai 200233 (China); Zhou Yonghui [Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061 (China)

    2010-03-25

    An Al{sub 2}O{sub 3}-based composite ceramic tool material reinforced with WC microparticles and TiC nano-particles was fabricated by using hot-pressing technique with MgO and NiO as sintering aids. The experimental results showed that optimal mechanical properties were achieved for the composite with the addition of 24 vol.% TiC nano-particles and 16 vol.% WC microparticles, with the flexural strength, fracture toughness and Vicker's hardness being 842 MPa, 6.82 MPa m{sup 1/2} and 22.19 GPa, respectively. The microstructure and phase composition of the composites were characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The fracture surface of the Al{sub 2}O{sub 3}/16 vol.%WC/24 vol.%TiC micro- nano-composite was characterized by a mix of intergranular and transgranular fracture as a result of the presence of both intergranular and intragranular secondary phase particles. It is believed that inhibition of matrix grain growth by intergranular secondary phase particles, sub-grain boundaries and dislocations pinning inside Al{sub 2}O{sub 3} grains induced by intragranular TiC nano-particles contribute to the strengthening of the composite. Meanwhile, the dislocations and microcracks inside the matrix grains can also increase the flaw-tolerance leading to high toughness of the composite. Additionally, some extrinsic processes including crack deflection, crack bridging and crack branching caused by the microstructural discontinuities and local stress state can absorb a great amount of fracture energy, which are beneficial for the toughening of the composite. However, future research will need to quantitatively understand the synergistic effect of TiC nano-particles and WC microparticles on strengthening and toughening mechanisms.

  2. Multifunctional (Nano)Composite Materials for Energy Storage: Towards Flexible Load-Bearing Batteries and Supercapacitors

    Science.gov (United States)

    2012-08-01

    tech.gatech.edu Polyaniline ( PANI ) for Supercapacitors -0.6 -0.3 0.0 0.3 0.6 -600 -300 0 300 600 C a p a c it y , F /g Voltage, V Regular PANI After...www.nano-tech.gatech.edu Polyaniline ( PANI ) for Supercapacitors Regular PANI 1600 1400 1200 1000 800 600 400 ring...ND)-Embedded Polyaniline ( PANI ) for Supercapacitors Aqueous electrolyte 0.0 0.4 0.8 1.2 1.6 2.0 0.0 0.4 0.8 1.2 1.6 2.0 after Im ( Z ), O h m *s

  3. One-step solution combustion synthesis of Fe{sub 2}O{sub 3}/C nano-composites as anode materials for lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Li, Peiyang; Deng, Jiachun; Li, Ying [Nano-Energy Inorganic Materials Laboratory, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Liang, Wei, E-mail: liangwei@tyut.edu.cn [Nano-Energy Inorganic Materials Laboratory, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Wang, Kun [Nano-Energy Inorganic Materials Laboratory, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Kang, Litao, E-mail: kangltxy@gmail.com [Nano-Energy Inorganic Materials Laboratory, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Zeng, Shaozhong; Yin, Shanhui; Zhao, Zhigang [Chery Automobile Co. Ltd., Wuhu 241006 (China); Liu, Xuguang; Yang, Yongzhen [College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Gao, Feng [State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001 (China)

    2014-03-25

    Highlights: • Fe{sub 2}O{sub 3}/C composite anode materials were prepared by a solution combustion process. • The carbon content could be adjusted by regulating the ratio of oxidizer/fuel. • The Fe{sub 2}O{sub 3}/C composite showed capacity 470 mA h g{sup −1} at the 80th cycle at 125 mA g{sup −1}. -- Abstract: This article describes a one-step solution combustion route (within 30 min at 350 °C in air) to prepare Fe{sub 2}O{sub 3} anode materials for lithium ion batteries (LIBs) from Fe(NO{sub 3}){sub 3}⋅9H{sub 2}O solution with citric acid. XRD, SEM-EDX and TEM showed that the product consisted a mixture of nano-sized α-Fe{sub 2}O{sub 3} and γ-Fe{sub 2}O{sub 3} crystals that agglomerated into porous particles. Significantly, in situ formed carbon could be introduced into the product (i.e., Fe{sub 2}O{sub 3}/C nano-composites) by simply increasing the dosage of citric acid in the precursor solution. The as-prepared Fe{sub 2}O{sub 3}/C nano-composite exhibited high reversible capacities of 470 and 419 mA h g{sup −1} at the 80th and 200th cycles with a current density of 125 mA g{sup −1}, which are much higher than those of counterparts without carbon (i.e., Fe{sub 2}O{sub 3} nano-particles). Comparison experiments correlated with the performance improvement of Fe{sub 2}O{sub 3}/C nano-composites with in situ formed carbon, well-developed mesopores and relatively high specific surface areas.

  4. Conductive polymer/reduced graphene oxide/Au nano particles as efficient composite materials in electrochemical supercapacitors

    Science.gov (United States)

    Shabani Shayeh, J.; Ehsani, A.; Ganjali, M. R.; Norouzi, P.; Jaleh, B.

    2015-10-01

    Polyaniline/reduced graphene oxide/Au nano particles (PANI/rGO/AuNPs) as a hybrid supercapacitor were deposited on a glassy carbon electrode (GCE) by cyclic voltammetry (CV) method as ternary composites and their electrochemical performance was evaluated in acidic medium. Scanning electron micrographs clearly revealed the formation of nanocomposites on the surface of the working electrode. Scanning electron micrographs (SEM) clearly revealed the formation of nanocomposites on the surface of working electrode. Different electrochemical methods including galvanostatic charge-discharge (CD) experiments, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were carried out in order to investigate the applicability of the system as a supercapacitor. Based on the cyclic voltammogram results obtained, PANI/rGO/AuNPs gave higher specific capacitance, power and energy values than PANI at a current density of 1 mA cm-2. Specific capacitance (SC) of PANI and PANI/rGO/AuNPs electrodes calculated using CV method are 190 and 303 F g-1, respectively. The present study introduces new nanocomposite materials for electrochemical redox capacitors with advantages including long life cycle and stability due to synergistic effects of each component.

  5. Nano-structures Enhanced Novel Composite Electrode Material for Batteries Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Integrate advanced nanotechnology with energy storage technology to develop advanced cathode material for use in Li-ion batteries while maintaining high level of...

  6. Nano polypeptide particles reinforced polymer composite fibers.

    Science.gov (United States)

    Li, Jiashen; Li, Yi; Zhang, Jing; Li, Gang; Liu, Xuan; Li, Zhi; Liu, Xuqing; Han, Yanxia; Zhao, Zheng

    2015-02-25

    Because of the intensified competition of land resources for growing food and natural textile fibers, there is an urgent need to reuse and recycle the consumed/wasted natural fibers as regenerated green materials. Although polypeptide was extracted from wool by alkaline hydrolysis, the size of the polypeptide fragments could be reduced to nanoscale. The wool polypeptide particles were fragile and could be crushed down to nano size again and dispersed evenly among polymer matrix under melt extrusion condition. The nano polypeptide particles could reinforce antiultraviolet capability, moisture regain, and mechanical properties of the polymer-polypeptide composite fibers.

  7. PVC/HfA/MMA/nano-Al(OH)3复合材料性能的研究%Study on Properties of PVC/HfA/MMA/nano-Al(OH)3 Composite Materials

    Institute of Scientific and Technical Information of China (English)

    王金明; 刘文飞; 张勇; 白庆华

    2011-01-01

    采用丙烯酸六氟丁酯(HfA)和甲基丙烯酸甲酯(MMA)在纳米Al(OH)3(nano-Al(OH)3)颗粒进行表面聚合,使nano-Al(OH)3表面成亲油性,从而与聚氯乙烯(PVC)颗粒的相容性得到提高。在PVC聚合后期加入这种改性剂,纳米粒子包覆在PVC颗粒表面,改性PVC的综合性能得到改善。最佳试验反应条件为:HfA/MMA/nano-Al(OH)3的配比为3∶5∶92,PVC聚合后期加入占改性PVC树脂含量8%的HfA/MMA/nano-Al(OH)3复合材料,制备出的改性PVC树脂混合料的力学性能和耐热抑烟性能均比空白样品大幅提高。%A new kind of composite materials was prepared by polymerization of butyl acrylate hexafluo- ropropylene (HfA) and methyl methacrylate (MMA) on surface of nano-Al (OH)3 particles. The new composite has very good lipophilicity and improved compatibility with polyvinyl chloride (PVC), By adding the new composite as PVC modifier during polymerization , the nano-composite particles can coat on the surface of PVC particles and the overall propeities of the modified PVC can be improved. The optimal preparation conditions for the new composite were obtained as HfA/MMA/nano-Al (OH)3 equal to 3:5:92,.When the adding amount of the new composite in PVC account for 8% of the PVC resin, the mechanical properties and heatresistance as well as smoke suppression properity of the modified PVC materials are highly improved.

  8. Comparison of dielectric properties of polydimethylsiloxane (PDMS) grafted polyacrylates/nano alumina and nano silica composites

    Science.gov (United States)

    Murudkar, Vrishali V.; Gaonkar, Amita A.; Deshpande, V. D.; Mhaske, S. T.

    2016-05-01

    Polydimethylsiloxane possess very poor mechanical properties. However, typically the initial modulus and durability of material is low and to improve this aspect a reinforcement phase is required. For the composite to be effective the filler must be with large aspect ratio i.e. with large surface area to volume ratio. Nano alumina (Al2O3) and nano silica (SiO2) are materials of choice for nanocomposite design. Grafted Polydimethylsiloxane (G-PDMS) and nano alumina and nano Silica composites have been prepared, by solvent casting method. FTIR study reveals that there is bonding overlap in G-PDMS/SiO2 nano composites. In dielectric study, it is observed that G-PDMS/SiO2 nano composites were more conducting in nature than G-PDMS/ Al2O3 nano composites. G-PDMS/ Al2O3 nano composites showed enhanced dielectric constant and less loss of energy than G-PDMS/SiO2 nano composites.

  9. Composite material

    Science.gov (United States)

    Hutchens, Stacy A.; Woodward, Jonathan; Evans, Barbara R.; O'Neill, Hugh M.

    2012-02-07

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  10. Microstructure and Behaviors of Nano Composite Coating

    Institute of Scientific and Technical Information of China (English)

    ZHOU Xi-ying; QIAN Shi-qiang; LI Wei-hong; LI Pei-yao; LI Man-ping

    2004-01-01

    Nano composite coatings are fabricated by electro brush plating containing various nano particles (Al2O3, SiO2and ZrO2). Its surface morphology and microstructure are observed by means of S-2700 scanning electron microscopy (SEM). And the mechanical behaviors of nano composite coating are analyzed. The results show that microstructure of nano composite coating is obviously fine because of nano particles. Micro hardness at room temperature increases with the increase of nano particles content. The wear resistance and hardness at high temperature are also improved. The strengthening effect is differentiated by the type and content of nano particles. This is due to the combination of dispersion strengthening and grain size strengthening.Key Words: Nano particles, composite coating, electro brush plating, behaviors

  11. Effects of sintering processes on mechanical properties and microstructure of TiB{sub 2}-TiC + 8 wt% nano-Ni composite ceramic cutting tool material

    Energy Technology Data Exchange (ETDEWEB)

    Zou Bin, E-mail: zou20011110@163.com [Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061 (China) and Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education (China); Huang Chuanzhen; Song Jinpeng; Liu Ziye; Liu Lin; Zhao Yan [Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061 (China); Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education (China)

    2012-04-01

    Highlights: Black-Right-Pointing-Pointer TiB{sub 2}-TiC + 8 wt% nano-Ni ceramic tool material was sintered by six processes. Black-Right-Pointing-Pointer The properties of material depended mainly on the holding stages and duration. Black-Right-Pointing-Pointer SP1 process was involved with the multiple holding stages and longer duration. Black-Right-Pointing-Pointer SP1 process led to many pores, and coarsening and brittle rupture of grains. Black-Right-Pointing-Pointer Tool material sintered by SP6 process exhibited the optimum mechanical properties. - Abstract: TiB{sub 2}-TiC composite powder was prepared by ball-milled with ethanol and vacuum dry, and TiB{sub 2}-TiC + 8 wt% nano-Ni composite ceramic cutting tool material was sintered using vacuum hot-pressed sintering technique by six processes which included the different holding stages and times. The effects of sintering processes on the mechanical properties and microstructure were investigated. The polished surface and fracture surface of TiB{sub 2}-TiC + 8 wt% nano-Ni ceramics sintered by the different sintering processes were observed by scanning electron microscope (SEM), X-ray diffraction (XRD) and energy-dispersive spectrometry (EDS), and the relationships between mechanical properties and microstructure were discussed. The mechanical properties and microstructure depended mainly on the total holding time and the different holding stages. The longer holding time and multiple holding stages led to coarsening of TiB{sub 2} and TiC grains, formation of pores and the brittle rupture of grains, which deteriorated the mechanical properties of TiB{sub 2}-TiC + 8 wt% nano-Ni ceramic. TiB{sub 2}-TiC + 8 wt% nano-Ni composite ceramic cutting tool material sintered by SP6 process exhibited the optimum resultant mechanical properties because of its finer microstructure and higher relative density, and its flexural strength, fracture toughness and hardness were 916.8 MPa, 7.80 MPa m{sup 1/2} and 22.54 GPa

  12. Nano and hybrid aluminum based metal matrix composites: an overview

    Directory of Open Access Journals (Sweden)

    Muley Aniruddha V.

    2015-01-01

    Full Text Available Aluminium matrix composites (AMCs are potential light weight engineering materials with excellent properties. AMCs find application in many areas including automobile, mining, aerospace and defence, etc. Due to technological advancements, it is possible to use nano sized reinforcement in Al matrix. Nano sized reinforcements enhance the properties of Al matrix compared to micro sized reinforcements. Hybrid reinforcement imbibe superior properties to aluminium matrix composites as compared with Al composites having single reinforcement. This paper is focused on overview of development in the field of Al based metal matrix with nano and hybrid aluminium based composites.

  13. Generalized Dual Symmetry Mechanical Performance of Nano Magnetic Composite

    Institute of Scientific and Technical Information of China (English)

    Li Yong; Song Jian; Zhang Z.M

    2004-01-01

    Nano magnetic composite is a kind of heterogeneous material. Scientists found the symmetrical and dual symmetrical phenomena in its structure previously and we find the generalized dual symmetry mechanical performance in Nano Magnetic Composite and further establish the theory. The applicable nano magnetic composite structure is analyzed thoroughly and systematically. Such phenomena as serration and step dispersing distribution of bending stress and mirror reflection of interlaminar stress are thus found. Therefore, starting from the physical features of materials, Nano Magnetic Composite are analyzed on the basis of the understanding and application of the generalized dual symmetry mechanical performance. In addition, the design parameter is optimized to attain the goal of maximizing the use of materials, which is quite meaningful.

  14. Microstructure and Behaviors of Nano Composite Coating

    Institute of Scientific and Technical Information of China (English)

    ZHOUXi-ying; QIANShi-qiang; LiWei-hong; LIPei-yao; LIMan-ping

    2004-01-01

    Nano composite coatings are fabricated by electro brash plating containing various nano particles (Al2O3, SiO2 and ZrO2). Its surface morphology and microstructure are observed by means of S-2700 scanning elect-on microscopy (SEMI, And the mechanical behaviors of nano composite coating are analyzed. The results show that microstructure of nano composite coating is obviously fine because of nano particles. Micro hardness at room temperature increases with the increase of nano particles content. The wear resistance and hardness at high temperature are also improved. The strengthening effect is differentiated by the type and content of nano particle.s, This is due to the combination of dispersion strengthening and grain size strengthening.

  15. Mechanical Properties of Polymer Nano-composites

    Science.gov (United States)

    Srivastava, Iti

    Thermoset polymer composites are increasingly important in high-performance engineering industries due to their light-weight and high specific strength, finding cutting-edge applications such as aircraft fuselage material and automobile parts. Epoxy is the most widely employed thermoset polymer, but is brittle due to extensive cross-linking and notch sensitivity, necessitating mechanical property studies especially fracture toughness and fatigue resistance, to ameliorate the low crack resistance. Towards this end, various nano and micro fillers have been used with epoxy to form composite materials. Particularly for nano-fillers, the 1-100 nm scale dimensions lead to fascinating mechanical properties, oftentimes proving superior to the epoxy matrix. The chemical nature, topology, mechanical properties and geometry of the nano-fillers have a profound influence on nano-composite behavior and hence are studied in the context of enhancing properties and understanding reinforcement mechanisms in polymer matrix nano-composites. Using carbon nanotubes (CNTs) as polymer filler, uniquely results in both increased stiffness as well as toughness, leading to extensive research on their applications. Though CNTs-polymer nano-composites offer better mechanical properties, at high stress amplitude their fatigue resistance is lost. In this work covalent functionalization of CNTs has been found to have a profound impact on mechanical properties of the CNT-epoxy nano-composite. Amine treated CNTs were found to give rise to effective fatigue resistance throughout the whole range of stress intensity factor, in addition to significantly enhancing fracture toughness, ductility, Young's modulus and average hardness of the nano-composite by factors of 57%, 60%, 30% and 45% respectively over the matrix as a result of diminished localized cross-linking. Graphene, a one-atom-thick sheet of atoms is a carbon allotrope, which has garnered significant attention of the scientific community and is

  16. Characterization of Kaolin as Nano Material for High Quality Construction

    Directory of Open Access Journals (Sweden)

    Fadzil M. A.

    2017-01-01

    Full Text Available At the moment utilisation of nano technology in every aspect in human life were growing rapidly. In this research, a new nano material was produce from kaolin clay and compare to OPC in terms of surface analysis, particle sizing and micrograph image on new modification of kaolin clay particles. Kaolin clay was established in two processes which are before and after heat treatment. Apart from that, transformation of kaolin clay to nano material was monitor by using Field Emission Scanning Electron Microscope (FESEM and new nano materials were formed. Those images were supported by X Ray Diffraction analysis (XRD, X Ray Fluorescence (XRF and laser particle analyser to see the chemical composition and particle size for all specimens. A combination of rough, smooth and long section can be analysed. From this analysis a new develops nano materials can be achieved and can be utilised especially for construction purposes.

  17. Metal Matrix Composites Reinforced by Nano-Particles—A Review

    Directory of Open Access Journals (Sweden)

    Riccardo Casati

    2014-03-01

    Full Text Available Metal matrix composites reinforced by nano-particles are very promising materials, suitable for a large number of applications. These composites consist of a metal matrix filled with nano-particles featuring physical and mechanical properties very different from those of the matrix. The nano-particles can improve the base material in terms of wear resistance, damping properties and mechanical strength. Different kinds of metals, predominantly Al, Mg and Cu, have been employed for the production of composites reinforced by nano-ceramic particles such as carbides, nitrides, oxides as well as carbon nanotubes. The main issue of concern for the synthesis of these materials consists in the low wettability of the reinforcement phase by the molten metal, which does not allow the synthesis by conventional casting methods. Several alternative routes have been presented in literature for the production of nano-composites. This work is aimed at reviewing the most important manufacturing techniques used for the synthesis of bulk metal matrix nanocomposites. Moreover, the strengthening mechanisms responsible for the improvement of mechanical properties of nano-reinforced metal matrix composites have been reviewed and the main potential applications of this new class of materials are envisaged.

  18. Micromechanics of Composite Materials

    CERN Document Server

    Dvorak, George

    2013-01-01

    This book presents a broad exposition of analytical and numerical methods for modeling composite materials, laminates, polycrystals and other heterogeneous solids, with emphasis on connections between material properties and responses on several length scales, ranging from the nano and microscales to the macroscale. Many new results and methods developed by the author are incorporated into a rich fabric of the subject, which has been explored by several researchers over the last 40 years.   The first  part of the book reviews anisotropic elasticity theory, and then it describes the frequently used procedures and theorems for bounding and estimating overall properties, local fields and energy changes in elastic inhomogeneities, heterogeneous media, fiber composites and functionally graded materials.  Those are caused by mechanical loads and by phase eigenstrains, such as thermal, transformation and inelastic strains, and also by cavities and cracks.    Worked examples show that the eigendeformations may...

  19. Nano-Composite Superfine Nickel Powder Double Absorbent Coating Designing

    Institute of Scientific and Technical Information of China (English)

    LU Yan-hong; WANG Zhi-hui; HUANG Dong-zhen; HU Chuan-xin; ZHANG Chen-jia; LI Wan-zhi; LIANG Wen-ting

    2004-01-01

    We adopt a definite procedure to compound traditional absorbing material-superfine powder nickel and nano -SiC powder to obtain the nano-composite nickel powder, then testing the absorbing speciality of the composite powder. In virtue of computer assistant designing, we apply double-deck absorbent structure to improve absorbent effect and widen wave band. The experiment indicated that it is possible to achieve the anticipative object to improve the absorbing capability by adopting nano-composite absorbing material, but each component of the composite material must have matched electromagnetic parameter with another. For matching double-coating structure, it ought to modulate the correlativity of each factor to achieve the most matching in order to optimise the absorbent speciality.

  20. Chitosan mediated synthesis of core/double shell ternary polyaniline/Chitosan/cobalt oxide nano composite-as high energy storage electrode material in supercapacitors

    Science.gov (United States)

    Vellakkat, Mini; Hundekkal, Devendrappa

    2016-01-01

    Nanostructured ternary composite of polyaniline (PANI), Co3O4 nanoparticles, and Chitosan (CS) has been prepared by an in situ chemical oxidation method, and the nanocomposites (CPAESCO) were used as supercapacitor electrodes. The Co3O4 nanoparticles are uniformly coated with CS and PANI layers in it. Different techniques (Fourier transform infrared spectrophotometry, x-ray diffraction, thermal gravimetric analysis, UV-visible spectroscopy, scanning electron microscopy, transmission electron microscopy and electro chemical analysis-cyclic voltammetry, galvanostatic charge/discharge (GCD), and electrochemical impedance spectroscopy) were used to analyse the optical, structural, thermal, chemical and supercapacitive aspects of the nanocomposites. Core/double shell ternary composite electrode exhibits significantly increased specific capacitance than PANI/Co3O4 or PANI/CS binary composites in supercapacitors. The ternary nanocomposite with 40% nanoparticle exhibits a highest specific capacitance reaching 687 F g-1, Energy density of (95.42 Wh kg-1 at 1 A g-1) and power density of (1549 W kg-1 at 3 A g-1) and outstanding cycling performance, with, 91% capacitance retained over 5000 cycles. It is found that this unique bio compatible nano composite with synergy is a new multifunctional material which will be useful in the design of supercapacitor electrodes and other energy conversion devices too.

  1. Biologically Inspired Self-assembling Synthesis of Bone-like Nano-hydroxyapatite/PLGA- (PEG-ASP)n Composite: A New Biomimetic Bone Tissue Engineering Scaffold Material

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A new biomimetic bone tissue engineering scaffold material, nano-HA/ PLGA-( PEG- ASP )n composite, was synthesized by a biologically inspired self assembling approach. A novel biodegradable PLGA( PEG-ASP ) n copolymer with pendant amine functional groups and enhanced hydrophilicity was synthesized by bulk ring-opening copolymerization by DL-lactide( DLLA ) and glycolide( GA ) with Aspartic acid ( ASP )-Polyethylene glycol( PEG ) alt-prepolymer. A Three-dimensional, porous scaffold of the PLGA-( PEG-ASP )n copolymer was fabricated by a solvent casting, particulate leaching process. The scaffold was then incubated in modified simulated body fluid ( mSBF ) . Growth of HA nanocrystals on the inner pore surfaces of the porous scaffold is confirmed by calcium ion binding analyses, SEM, mass increase measurements and quantification of phosphate content within scaffolds . SEM analysis demonstrated the nucleation and growth of a continuous bonelike, low crystalline carbonated HA nanocrystals on the inner pore surfawes of the PLGA-( PEG-ASP)n scaffolds. The amount of calcium binding, total mass and the mass of pbosphate on experimental PLGA-( PEG- ASP )n scaffolds at different incubation times in mSBF was significantly greater than that of control PLGA scaffolds . This nano-HA/ PLGA- ( PEG-ASP )n composite shows some features of natural bone both in main composition and hierarchical microstructure. The ASPPEG alt-prepolymer modified PLGA copolymer provide a controllable high surface density and distribution of anionic functional groups which would enhauce nucleation and growth of bonelike mineral following exposure to mSBF. This biomimetic treatment provides a simple method for surface funetionalization and subsequent mineral nucleation and self-assembling on biodegradable polymer scaffolds for tissue engineering.

  2. Composite materials formed with anchored nanostructures

    Science.gov (United States)

    Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

    2015-03-10

    A method of forming nano-structure composite materials that have a binder material and a nanostructure fiber material is described. A precursor material may be formed using a mixture of at least one metal powder and anchored nanostructure materials. The metal powder mixture may be (a) Ni powder and (b) NiAl powder. The anchored nanostructure materials may comprise (i) NiAl powder as a support material and (ii) carbon nanotubes attached to nanoparticles adjacent to a surface of the support material. The process of forming nano-structure composite materials typically involves sintering the mixture under vacuum in a die. When Ni and NiAl are used in the metal powder mixture Ni.sub.3Al may form as the binder material after sintering. The mixture is sintered until it consolidates to form the nano-structure composite material.

  3. Prediction of anisotropic behavior of nano/micro composite based on damage mechanics with cell modeling.

    Science.gov (United States)

    Lee, Dock-Jin; Kim, Young-Jin; Kim, Moon-Ki; Choi, Jae-Boong; Chang, Yoon-Suk; Liu, Wing Kam

    2011-01-01

    New advanced composite materials have recently been of great interest. Especially, many researchers have studied on nano/micro composites based on matrix filled with nano-particles, nano-tubes, nano-wires and so forth, which have outstanding characteristics on thermal, electrical, optical, chemical and mechanical properties. Therefore, the need of numerical approach for design and development of the advanced materials has been recognized. In this paper, finite element analysis based on multi-resolution continuum theory is carried out to predict the anisotropic behavior of nano/micro composites based on damage mechanics with a cell modeling. The cell modeling systematically evaluates constitutive relationships from microstructure of the composite material. Effects of plastic anisotropy on deformation behavior and damage evolution of nano/micro composite are investigated by using Hill's 48 yield function and also compared with those obtained from Gurson-Tvergaard-Needleman isotropic damage model based on von Mises yield function.

  4. Research and application of nano-TiO2/chitosan composite materials%纳米二氧化钛/壳聚糖复合材料的研究及应用进展

    Institute of Scientific and Technical Information of China (English)

    王香爱

    2012-01-01

    纳米TiO2/壳聚糖复合材料兼具了纳米TiC2的抗菌性、生物兼容性、光催化作用等特性以及壳聚糖的抗菌性、成膜性、生物相容性.作者主要介绍了纳米TiO2/壳聚糖复合材料的制备方法,综述了该复合材料在纺织材料、除污、医疗、果蔬保鲜、农业等领域的应用.%Nano-TiO2/Chitosan composite materials have both the properties of nano-TiO2( antimicrobial properties,biocompatibility,photo-catalysis) and the properties of chitosan ( antimicrobial properties, film-forming, biocompatibility). This paper mainly introduced several preparation methods of nano-TiO2/chitosan composite materials,reviewed the progress of research on the application of such nano-TiO2/chitosan composite materials in the field of textile materials, pollutant removal, medical treatment, fresh-keeping, agriculture and so on.

  5. Nano-structured alloy and composite coatings for high temperature applications

    Directory of Open Access Journals (Sweden)

    Wei Gao

    2004-03-01

    Full Text Available Nano-structured materials often possess special properties that materials with identical compositions but ordinary grain size do not have. This paper reports our work on the surface nano-crystallisation and nano-structured alloy and composite coatings. A number of processing methods including magnetron sputtering, thermal spray and pulse electro-spark deposition have been used to produce surface nano-crystalline structure. The compositions and microstructures can be well controlled by using different targets or electrodes, nano-structured composites and adjusting processing parameters. Surface nano-structured coatings can provide special chemical, mechanical and electronic properties such as high temperature corrosion and corrosive wear resistance. It has potential applications such as turbine blades, engine parts for petrochemical, aerospace and electronic device industries. This paper is focused on the study of the interrelations between processing, microstructure and properties. Physical models have been established to explain the effects of nano-crystalline structure on the properties.

  6. Multilayer Electroactive Polymer Composite Material

    Science.gov (United States)

    Ounaies, Zoubeida (Inventor); Park, Cheol (Inventor); Harrison, Joycelyn S. (Inventor); Holloway, Nancy M. (Inventor); Draughon, Gregory K. (Inventor)

    2011-01-01

    An electroactive material comprises multiple layers of electroactive composite with each layer having unique dielectric, electrical and mechanical properties that define an electromechanical operation thereof when affected by an external stimulus. For example, each layer can be (i) a 2-phase composite made from a polymer with polarizable moieties and an effective amount of carbon nanotubes incorporated in the polymer for a predetermined electromechanical operation, or (ii) a 3-phase composite having the elements of the 2-phase composite and further including a third component of micro-sized to nano-sized particles of an electroactive ceramic incorporated in the polymer matrix.

  7. Damping Behavior of Alumina Epoxy Nano-Composites

    Science.gov (United States)

    Katiyar, Priyanka; Kumar, Anand

    2016-10-01

    Polymer nano composites, consisting of a polymer matrix with nanoparticle filler, have been predicted to be one of the most beneficial applications of nanotechnology. Addition of nano particulates to a polymer matrix enhances its performance by capitalizing on the nature and properties of the nano-scale fillers. The damping behavior of composites with nano structured phases is significantly different from that of micro structured materials. Viscoelastic homopolymer exhibit a high material damping response over a relatively narrow range of temperature and frequencies. In many practical situations, a polymeric structure is required to possess better strength and stiffness properties together with a reasonable damping behavior. Viscoelastic polymers show higher loss factor beyond the glassy region which comes with a significant drop in the specific modulus. Addition of nano alumina particles to epoxy leads to improved strength and stiffness properties with an increase in glass transition temperature while retaining its damping capability. Experimental investigations are carried out on composite beam specimen fabricated with different compositions of alumina nano particles in epoxy to evaluate loss factor, tan δ. Impact damping method is used for time response analysis. A single point Laser is used to record the transverse displacement of a point on the composite beam specimen. The experimental results are compared with theoretical estimation of loss factor using Voigt estimation. The effect of inter phase is included in theoretical estimation of loss factor. The result reveals that the study of interface properties is very important in deriving the overall loss factor of the composite since interface occupies a significant volume fraction in the composite.

  8. Damping Behavior of Alumina Epoxy Nano-Composites

    Science.gov (United States)

    Katiyar, Priyanka; Kumar, Anand

    2016-05-01

    Polymer nano composites, consisting of a polymer matrix with nanoparticle filler, have been predicted to be one of the most beneficial applications of nanotechnology. Addition of nano particulates to a polymer matrix enhances its performance by capitalizing on the nature and properties of the nano-scale fillers. The damping behavior of composites with nano structured phases is significantly different from that of micro structured materials. Viscoelastic homopolymer exhibit a high material damping response over a relatively narrow range of temperature and frequencies. In many practical situations, a polymeric structure is required to possess better strength and stiffness properties together with a reasonable damping behavior. Viscoelastic polymers show higher loss factor beyond the glassy region which comes with a significant drop in the specific modulus. Addition of nano alumina particles to epoxy leads to improved strength and stiffness properties with an increase in glass transition temperature while retaining its damping capability. Experimental investigations are carried out on composite beam specimen fabricated with different compositions of alumina nano particles in epoxy to evaluate loss factor, tan δ. Impact damping method is used for time response analysis. A single point Laser is used to record the transverse displacement of a point on the composite beam specimen. The experimental results are compared with theoretical estimation of loss factor using Voigt estimation. The effect of inter phase is included in theoretical estimation of loss factor. The result reveals that the study of interface properties is very important in deriving the overall loss factor of the composite since interface occupies a significant volume fraction in the composite.

  9. Progress in synthesizing functional nano materials

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ With the consistent investment, the research team directed by Prof. Yadong Li of Chemistry Department of Tsinghua University achieved new progress in synthesizing nano materials with specific functions. The research team led by Prof.

  10. Effect of nano materials in geopolymer concrete

    Directory of Open Access Journals (Sweden)

    Sudipta Naskar

    2016-09-01

    Full Text Available In general, cement based concrete can be replaced by low calcium fly-ash based geopolymer concrete regarding the adverse effect of the manufacture of ordinary Portland cement on environment. Nowadays, nano technology has an important role in the field of construction industries. It has been seen that several properties of cement based concrete are affected by different nano materials. As low calcium fly-ash based geopolymer concrete is an alternate option for cement based concrete, nano materials may also have some influence on it. An experimental program has been taken up on low calcium fly-ash based M25 grade geopolymer concrete having 16 (M concentration of activator liquid. Different percentage of nano materials viz. nano silica, carbon nano tube, titanium di-oxide were also used to investigate the effect of nano materials on geopolymer concrete. Geopolymer concrete with 1% titanium di-oxide shows appreciable improvement in compressive strength although pH remains almost same in all cases.

  11. Rheological behavior and dynamic mechanical properties of nano-copper powder/PP composite material%纳米铜粉/PP复合材料的流变性能及动态力学性能研究

    Institute of Scientific and Technical Information of China (English)

    徐德增; 赵婷; 刘智超; 白麓楠; 郭静

    2012-01-01

    将纳米铜粉经硅烷偶联剂KH550处理后,按不同的配比与聚丙烯(PP)混合,经螺杆挤压制得纳米铜粉/PP复合材料,研究了纳米铜粉在PP复合材料中的分散性以及PP复合材料的流变性能和动态力学性能.结果表明:经改性后的纳米铜粉均匀分散在PP中;纳米铜粉/PP复合材料为非牛顿假塑性流体;在低剪切速率下,复合材料熔体的黏度高于纯PP的,随着纳米铜粉的含量增加,复合材料体系的表观黏度增大,高剪切速率时,纳米铜粉的添加量对复合材料的流动性能影响较小;当复合材料体系中纳米铜粉的质量分数小于或等于0.5%时,其熔体流动性能提高,储能模量小于纯PP的,当纳米铜粉质量分数大于0.5%时,其储能模量提高并高于纯PP的.%Nano-copper powder/polypropylene (PP) composite material was prepared by blending PP and nano-copper powder modified with silane coupling agent KH550 at different ratios prior to screw extrusion. The dispersion of nano-copper powder in PP composite material was studied, as were the rheological behavior and dynamic mechanical properties of PP composite material. The results showed that nano-copper powder uniformly dispersed in PP matrix after modification; nano-copper powder/PP composite material was non-Newtonian pseudoplastic fluid; the viscosity of the composite material melt was higher than that of pure PP at low shearing rate; the apparent viscosity of the composite material system was increased with the addition of nano-copper powder; the addition of nano-copper powder had a slight effect on the rheological behavior of composite material at high shearing rate; the flowability of the composite material melt was improved, the storage modulus was lower than that of pure PP when the addition of nano-copper powder was not more than 0. 5% by mass fraction in the composite material system; and the storage modulus was higher than that of pure PP when the mass fraction of nano

  12. Sulfur/graphitic hollow carbon sphere nano-composite as a cathode material for high-power lithium-sulfur battery.

    Science.gov (United States)

    Shin, Eon Sung; Kim, Min-Seop; Cho, Won Il; Oh, Si Hyoung

    2013-08-03

    The intrinsic low conductivity of sulfur which leads to a low performance at a high current rate is one of the most limiting factors for the commercialization of lithium-sulfur battery. Here, we present an easy and convenient method to synthesize a mono-dispersed hollow carbon sphere with a thin graphitic wall which can be utilized as a support with a good electrical conductivity for the preparation of sulfur/carbon nano-composite cathode. The hollow carbon sphere was prepared from the pyrolysis of the homogenous mixture of the mono-dispersed spherical silica and Fe-phthalocyanine powder in elevated temperature. The composite cathode was manufactured by infiltrating sulfur melt into the inner side of the graphitic wall. The electrochemical cycling shows a capacity of 425 mAh g-1 at 3 C current rate which is more than five times larger than that for the sulfur/carbon black nano-composite prepared by simple ball milling.

  13. Simulation, design and proof-of-concept of a two-stage continuous hydrothermal flow synthesis reactor for synthesis of functionalized nano-sized inorganic composite materials

    DEFF Research Database (Denmark)

    Zielke, Philipp; Xu, Yu; Simonsen, Søren Bredmose

    2016-01-01

    Computational fluid dynamics simulations were employed to evaluate several mixer geometries for a novel two-stage continuous hydrothermal flow synthesis reactor. The addition of a second stage holds the promise of allowing the synthesis of functionalized nano-materials as for example core...

  14. PREFACE: International Conference on Structural Nano Composites (NANOSTRUC 2012)

    Science.gov (United States)

    Njuguna, James

    2012-09-01

    Dear Colleagues It is a great pleasure to welcome you to NanoStruc2012 at Cranfield University. The purpose of the 2012 International Conference on Structural Nano Composites (NanoStruc2012) is to promote activities in various areas of materials and structures by providing a forum for exchange of ideas, presentation of technical achievements and discussion of future directions. NanoStruc brings together an international community of experts to discuss the state-of-the-art, new research results, perspectives of future developments, and innovative applications relevant to structural materials, engineering structures, nanocomposites, modelling and simulations, and their related application areas. The conference is split in 7 panel sessions, Metallic Nanocomposites and Coatings, Silica based Nanocomposites, safty of Nanomaterials, Carboin based Nanocomposites, Multscale Modelling, Bio materials and Application of Nanomaterials. All accepted Papers will be published in the IOP Conference Series: Materials Science and Engineering (MSE), and included in the NanoStruc online digital library. The abstracts will be indexed in Scopus, Compedex, Inspec, INIS (International Nuclear Information System), Chemical Abstracts, NASA Astrophysics Data System and Polymer Library. Before ending this message, I would like to acknowledge the hard work, professional skills and efficiency of the team which ensured the general organisation. As a conclusion, I would like to Welcome you to the Nanostruc2012 and wish you a stimulating Conference and a wonderful time. On behalf of the scientific committee, Signature James Njuguna Conference Chair The PDF of this preface also contains committee listings and associates logos.

  15. Mechanical Spectroscopy of Nanostructured Composite Materials

    Energy Technology Data Exchange (ETDEWEB)

    Mari, Daniele; Schaller, Robert; Mazaheri, Mehdi, E-mail: daniele.mari@epfl.ch [Ecole Polytechnique Federale de Lausanne, Laboratoire de Physique de la Matiere Complexe, Groupe de Spectroscopie Mecanique, CH-1015 Lausanne (Switzerland)

    2011-07-06

    The thermo-mechanical behavior of different nano-structured composite materials, which were processed within the SAPHIR European Integrated Project, has been characterized by mechanical spectroscopy. The obtained results show clearly that creep resistance of fine grain ceramics such as zirconia can be improved by carbon nano-tube (CNT) reinforcements. On the other hand the elastic modulus and the damping capacity of aluminum matrix composites were increased by SiC nano-particle additions. It has also been observed that CNT additions are responsible for a better thermal stability of polymer such as ABS (Acrylonitrile-Butadiene-Styrene) used in automotive industry.

  16. Development trends in Conductive Nano-Composites for Radiation Shielding

    Directory of Open Access Journals (Sweden)

    Vishal Udmale

    2013-10-01

    Full Text Available Our paper reviews the use of conductive polymer composite materials in various applications for semi conductive, static-dissipative, anti-corrosive, electromagnetic interference (EMI shielding and stealth composite coatings. The composite consists of conductive fillers and the insulating polymer network. The composite becomes electrically conductive as the filler content exceeds a certain critical value, generally called as Percolation Threshold Value (PTV. The PTV for a particular polymer composite can be drastically reduced by using nano-sized conductive fillers. The higher the aspect ratio (length:width of the nano-fillers, the lower is the concentration for achieving the PTV. Traditionally the metals, carbon-black particles and alloys have been used as electrically conductive fillers; however, very high level of these fillers can be detrimental for the process ability, surface quality of the material, density, the cost and mechanical properties of the composite. By the use of nano conductive fillers, good conductivity will be achieved while retaining the original properties. Recently, one and two dimensional nano-creatures based on carbon such as carbon nanotubes and graphene respectively have received significant attention, due to their outstanding thermal, electronic and mechanical properties. In this paper we have compared different conductive filler materials, their dispersion techniques, and compatibility in polymer matrix and suitability in various above mentioned applications. The proliferation of mobile towers and electronic devices in the world results in harmful EMI and radio frequency interference (RFI ultimately causing operational malfunction to electronic devises and also harmful to living beings, signifies the importance of this detailed review for EMI/RFI shielding applications.

  17. MnO2/PVP/MWCNT hybrid nano composites as electrode materials for high performance supercapacitor

    Science.gov (United States)

    Jaggi, Neena; Sharma, Deepa; Sharma, Priya

    2016-10-01

    In this work, we developed supercapacitors with electrodes of manganese oxide (MnO2) and its nanocomposites with multiwalled carbon nanotubes (MWCNT) and polyvinylpyrrolidone (PVP) and studied the effect of the electrode material on various performance parameters of the supercapacitor. Cyclic voltammetry (CV) curves, galvanostatic charge/discharge measurement curves, XRD (x-ray diffraction), I-V characteristics and electrochemical impedance spectroscopy were employed for the characterization and analysis. CV curves were used to verify the supercapacitor behavior and the specific capacitance of the capacitors composed of the nanocomposite electrodes was calculated. I-V characteristics of MnO2 and MnO2/PVP/MWCNT were plotted and compared and conductivity measurements were also performed. Dielectric properties and equivalent series resistance were investigated using electrochemical impedance spectroscopy.

  18. Nano-material and method of fabrication

    Science.gov (United States)

    Menchhofer, Paul A; Seals, Roland D; Howe, Jane Y; Wang, Wei

    2015-02-03

    A fluffy nano-material and method of manufacture are described. At 2000.times. magnification the fluffy nanomaterial has the appearance of raw, uncarded wool, with individual fiber lengths ranging from approximately four microns to twenty microns. Powder-based nanocatalysts are dispersed in the fluffy nanomaterial. The production of fluffy nanomaterial typically involves flowing about 125 cc/min of organic vapor at a pressure of about 400 torr over powder-based nano-catalysts for a period of time that may range from approximately thirty minutes to twenty-four hours.

  19. Microstructure characterization and magnetic properties of nano structured materials

    Energy Technology Data Exchange (ETDEWEB)

    Sun, X.C

    2000-07-01

    The present thesis deals with the unique microstructural properties and their novel magnetic properties of core-shell Ni-Ce nano composite particles, carbon encapsulated Fe, Co, and Ni nanoparticles and the nano crystallization behavior of typical ferromagnetic Fe{sub 78}Si{sub 9}B{sub 13} ribbons. These properties have intensively been investigated by high resolution transmission electron microscopy (HREM), X-ray diffraction (XRD), scanning electron microscopy (Sem), X-ray energy dispersive spectroscopy [eds.]; selected area electron diffraction pattern (SAED), Ft-IR, differential scanning calorimeter (DSC). In addition, magnetic moments measurements at different temperatures and applied fields have been performed by transmission Moessbauer spectroscopy, superconducting quantum interference device magnetometer (SQUID), and vibrating sample magnetometer (VSM). The present studies may provide the insights for the better understanding of the correlation between the unique microstructure and novel magnetic properties for several magnetic nano structured materials. (Author)

  20. Photocatalytic studies of Ho–Zr–O nano-composite with controllable composition and defects

    Energy Technology Data Exchange (ETDEWEB)

    Du, Weimin, E-mail: duweimin75@gmail.com [College of Chemistry and Chemical Engineering, Anyang Normal University, Anyang, Henan 455000 (China); Zhao, Guoyan; Chang, Hongxun; Shi, Fei; Zhu, Zhaoqiang [College of Chemistry and Chemical Engineering, Anyang Normal University, Anyang, Henan 455000 (China); Qian, Xuefeng [School of Chemistry and Chemical Technology, Shanghai Jiao Tong University, Shanghai 200240 (China)

    2013-09-15

    With the help of sol–gel method assisted by melting salt, a series of Ho–Zr–O nano-composite with controllable composition and defects have been successfully prepared. Characterization results show that the positions, intensity, and width of the X-ray diffraction peaks of the products have a regular variation with the increase of zirconium element which implies the gradual changes of crystal spacing and product size. At the same time, the molar ratios between holmium and zirconium ions are consistent with the chemical formula and both of them are uniformly distributed in products further showing the perfect formation of targeted materials. Optical properties reveal that diversified defect forms of Ho–Zr–O nano-composite lead to the different absorptions of visible light. Photocatalytic experiments demonstrate Zr{sub 0.8}Ho{sub 0.2}O{sub 2−δ} nano-crystals have excellent visible-light-responsive photocatalytic activities on some familiar dyes (e.g.: methylene blue and Rhodamine B) which results from the special defect structure, better absorption of visible light and larger specific surface area. It follows that Zr{sub 0.8}Ho{sub 0.2}O{sub 2−δ} nano-crystals are a new kind of visible-light-responsive photocatalysts with better prospects in conversion and utilization of solar energy. Also, the present melting salt assisted route might be generalized to synthesize other AxByOz composite oxide nano-crystals with more complicated structures. - Highlights: • Ho–Zr–O nano-composite with controllable composition and defects has been obtained. • Diversified defect forms of products lead to the different visible light absorption. • Zr{sub 0.8}Ho{sub 0.2}O{sub 2−δ} nano-crystals have excellent photocatalytic activities.

  1. Uniform nano-Sn/C composite anodes for lithium ion batteries.

    Science.gov (United States)

    Xu, Yunhua; Liu, Qing; Zhu, Yujie; Liu, Yihang; Langrock, Alex; Zachariah, Michael R; Wang, Chunsheng

    2013-02-13

    Nano-Sn/C composites are ideal anode materials for high energy and power density Li-ion batteries. However, because of the low melting point of Sn and the tendency of grain growth, especially during high temperature carbonization, it has been a significant challenge to create well-dispersed ultrasmall Sn nanoparticles within a carbon matrix. In this paper, we demonstrate an aerosol spray pyrolysis technique, as a facile and scalable method, to synthesize a nano-Sn/C composite with uniformly dispersed 10 nm nano-Sn within a spherical carbon matrix. The discharge capacity of nano-Sn/C composite sphere anodes maintains the initial capacity of 710 mAh/g after 130 cycles at 0.25 C. The nano-Sn/C composite sphere anodes can provide ~600 mAh/g even at a high rate of 20 C. To the best of our knowledge, such high rate performance for Sn anodes has not been reported previously. The exceptional performance of the nano-Sn/C composite is attributed to the unique nano-Sn/C structure: (1) carbon matrix offers mechanical support to accommodate the stress associated with the large volume change of nano-Sn, thus alleviating pulverization; (2) the carbon matrix prevents Sn nanoparticle agglomeration upon prolonged cycling; and (3) carbon network provides continuous path for Li ions and electrons inside the nano-Sn/C composite spheres.

  2. 纳米TiO2-ZnO复合材料的制备及其光催化性能%Fabrication and Photocatalytic Properties of TiO2-ZnO Nano-composite Material

    Institute of Scientific and Technical Information of China (English)

    李智卓; 高艳; 陈红征

    2013-01-01

    A novel ZnO@TiO2 nano-composite material is fabricated via sol-gel method by using TiO2 nanotube arrays as the template.The nanostructure of the ZnO@TiO2 nano-composite was observed by SEM.The photocatalytic properties of ZnO@TiO2 nano-composite upon UV light exposure were investigated,which were found to be dependent on the depth and radius of TiO2 nantubes.The photocatalytic activity of the nano-composite was higher than that of ZnO@AAO plus TiO2 template,which could be attributed to the enhancement of charge transfer between TiO2 and ZnO.%本文以TiO2纳米管阵列作为模板,利用溶胶-凝胶法制备ZnO@TiO2纳米复合材料,通过SEM等测试手段对其结构进行了表征,并进一步研究了该复合材料在紫外光下对亚甲基蓝溶液的光催化效率.发现ZnO@TiO2复合材料的光催化效率与模板孔深孔径有关,并且由于TiO2与ZnO间的电荷转移作用,使得纳米复合材料的光催化效率高于TiO2模板和ZnO@AAO光催化效率的线性加合.

  3. Preparation and corrosion behavior evaluation of amalgam/titania nano composite

    OpenAIRE

    Neda Bahremandi Tolou; Mohammadhossein Fathi; Ahmad Monshi; Vajihesadat Mortazavi; Farzaneh Shirani

    2011-01-01

    Background: Many attempts have been performed and continued for improvement of dental amalgam properties during last decades. The aim of present research was fabrication and characterization of amalgam/titania nano composite and evaluation of its corrosion behavior. Materials and Methods: In this experimental research, nano particles of titania were added to initial amalgam alloy powder and then, dental amalgam was prepared. In order to investigate the effect of nano particle amounts on p...

  4. Could Nano-Structured Materials Enable the Improved Pressure Vessels for Deep Atmospheric Probes?

    Science.gov (United States)

    Srivastava, D.; Fuentes, A.; Bienstock, B.; Arnold, J. O.

    2005-01-01

    A viewgraph presentation on the use of Nano-Structured Materials to enable pressure vessel structures for deep atmospheric probes is shown. The topics include: 1) High Temperature/Pressure in Key X-Environments; 2) The Case for Use of Nano-Structured Materials Pressure Vessel Design; 3) Carbon based Nanomaterials; 4) Nanotube production & purification; 5) Nanomechanics of Carbon Nanotubes; 6) CNT-composites: Example (Polymer); 7) Effect of Loading sequence on Composite with 8% by volume; 8) Models for Particulate Reinforced Composites; 9) Fullerene/Ti Composite for High Strength-Insulating Layer; 10) Fullerene/Epoxy Composite for High Strength-Insulating Layer; 11) Models for Continuous Fiber Reinforced Composites; 12) Tensile Strength for Discontinuous Fiber Composite; 13) Ti + SWNT Composites: Thermal/Mechanical; 14) Ti + SWNT Composites: Tensile Strength; and 15) Nano-structured Shell for Pressure Vessels.

  5. Mechanical and tribological studies on nano particles reinforced hybrid aluminum based composite

    Directory of Open Access Journals (Sweden)

    Muley Aniruddha V.

    2015-01-01

    Full Text Available Hybrid metal matrix composites are new class of materials due to their better mechanical properties which can be achieved through proper selection and combination of materials. The work reported in this paper is based on fabrication of hybrid composites by using nano particles as reinforcements. The hybrid composites were fabricated by reinforcing them with nano sized SiC and Al2O3 particles in order to study mechanical and tribological properties of these enhanced materials. A stir casting method was used to obtain hybrid composites. LM 6 aluminum alloy was used as a matrix material. The results shown increase in hardness as well as in ultimate tensile strength of the composites with small wt.% of nano-sized hybrid reinforcements. The composites produced also exhibit better tribological properties.

  6. Novel nano-composite biomaterials that respond to light.

    Science.gov (United States)

    Hribar, Kolin C; Metter, Robert B; Burdick, Jason A

    2009-01-01

    Composites of nanoparticles and polymers are finding wide applications to alter material properties, conductivity, and utility. Here, we show that nano-composites can be designed to heat in the presence of near infrared light. This process is useful in transitioning materials through a transition temperature for a range of applications. For example, shape-memory materials (including polymers, metals, and ceramics) are those that are processed into a temporary shape and respond to some external stimuli (e.g., temperature) to undergo a transition back to a permanent shape and may be useful in a range of applications from aerospace to fabrics, to biomedical devices and microsystem components. In this work, we formulated composites of gold nanorods (<1% by volume) and biodegradable networks, where exposure to infrared light induced heating and consequently, shape transitions. The heating is repeatable and tunable based on nanorod concentration and light intensity.

  7. Nano Engineered Energetic Materials (NEEM)

    Science.gov (United States)

    2011-01-12

    reactivity of the nitro group. The more perpendicular orientation of the NO2 in p- NBA leaves both oxygen atoms available to complex vapor deposited Al...different solutes have been recorded in supercritical CO2 in the past, the information on the solubility of many energetic materials including RDX is...The pH level of the solution was monitored before and after to record the ionic activity of the solution. Different amounts of dispersant and

  8. Synthesis and characterization of poly-o-anisidine Sn(IV tungstate: A new and novel ‘organic–inorganic’ nano-composite material and its electro-analytical applications as Hg(II ion-selective membrane electrode

    Directory of Open Access Journals (Sweden)

    Asif A. Khan

    2012-07-01

    Full Text Available An organic–inorganic nano-composite poly-o-anisidine Sn(IV tungstate was chemically synthesized by sol–gel mixing of the incorporation of organic polymer o-anisidine into the matrices of inorganic ppt of Sn(IV tungstate in different mixing volume ratios. This composite material has been characterized using various analytical techniques like XRD (X-ray diffraction, FTIR (Fourier transform infrared, SEM (Scanning electron microscopy, TEM (Transmission electron microscopy and simultaneous TGA (Thermogravimetric analysis studies. On the basis of distribution studies, the material was found to be highly selective for Hg(II. Using this nano-composite cation exchanger as electro-active material, a new heterogeneous precipitate based on ion-sensitive membrane electrode was developed for the determination of Hg(II ions in solutions. The membrane electrode was mechanically stable, with a quick response time, and can be operated within a wide pH range. The electrode was also found to be satisfactory in electrometric titrations.

  9. Characterization and bioactivity of nano-submicro octacalcium phosphate/gelatin composite

    Energy Technology Data Exchange (ETDEWEB)

    Miura, Kei-ichiro [Division of Craniofacial Function Engineering, Tohoku University Graduate School of Dentistry, Sendai (Japan); Division of Oral and Maxillofacial Surgery, Tohoku University Graduate School of Dentistry, Sendai (Japan); Anada, Takahisa; Honda, Yoshitomo [Division of Craniofacial Function Engineering, Tohoku University Graduate School of Dentistry, Sendai (Japan); Shiwaku, Yukari [Division of Craniofacial Function Engineering, Tohoku University Graduate School of Dentistry, Sendai (Japan); Division of Advanced Prosthetic Dentistry, Tohoku University Graduate School of Dentistry, Sendai (Japan); Kawai, Tadashi; Echigo, Seishi; Takahashi, Tetsu [Division of Oral and Maxillofacial Surgery, Tohoku University Graduate School of Dentistry, Sendai (Japan); Suzuki, Osamu, E-mail: suzuki-o@m.tohoku.ac.jp [Division of Craniofacial Function Engineering, Tohoku University Graduate School of Dentistry, Sendai (Japan)

    2013-10-01

    The present study was designed to investigate the physicochemical and bioactive properties of a nano-submicro sized octacalcium phosphate (OCP)-dispersed gelatin (Gel) composite (nano-submicro OCP/Gel) used as a bone substitute material in various bone defects. Well-grown, synthesized OCP was mechanically ground from 100 to 300 μm-sieved granules to particles that were approximately 500 nm in size. Then, 50 wt% of the nano-submicro OCP was mixed with porcine skin-derived acid extracted gelatin. The mixture was molded and lyophilized and then subjected to dehydrothermal crosslinking. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy showed that the structure of OCP was retained even after mechanical grinding to a nano-submicro scale level as well as inclusion in the Gel matrix. The bioactivity of nano-submicro OCP/Gel was examined by immersing the composite in simulated body fluid (SBF) for 7 days and by implanting it in rat critical-sized calvaria defects for 8 weeks. The nano-submicro OCP tended to convert to low crystalline hydroxyapatite (HA) in SBF as assessed by XRD. The nano-submicro OCP/Gel exhibited osteoconductivity in vivo, yielding new bone formation that was closely associated with the implanted composite. These results suggest that the nano-submicro OCP/Gel composite exhibits similar osteoconductivity as observed in other OCP-based materials previously reported and could be used as a bone substitute material for repairing various defects in bone.

  10. Nano-material aspects of shock absorption in bone joints.

    Science.gov (United States)

    Tributsch, H; Copf, F; Copf, P; Hindenlang, U; Niethard, F U; Schneider, R

    2010-01-01

    This theoretical study is based on a nano-technological evaluation of the effect of pressure on the composite bone fine structure. It turned out, that the well known macroscopic mechano-elastic performance of bones in combination with muscles and tendons is just one functional aspect which is critically supported by additional micro- and nano- shock damping technology aimed at minimising local bone material damage within the joints and supporting spongy bone material. The identified mechanisms comprise essentially three phenomena localised within the three-dimensional spongy structure with channels and so called perforated flexible tensulae membranes of different dimensions intersecting and linking them. Kinetic energy of a mechanical shock may be dissipated within the solid-liquid composite bone structure into heat via the generation of quasi-chaotic hydromechanic micro-turbulence. It may generate electro-kinetic energy in terms of electric currents and potentials. And the resulting specific structural and surface electrochemical changes may induce the compressible intra-osseal liquid to build up pressure dependent free chemical energy. Innovative bone joint prostheses will have to consider and to be adapted to the nano-material aspects of shock absorption in the operated bones.

  11. Multifunctional materials and composites

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Dong-Kyun; Jeon, Ki-Wan

    2017-08-22

    Forming multifunctional materials and composites thereof includes contacting a first material having a plurality of oxygen-containing functional groups with a chalcogenide compound, and initiating a chemical reaction between the first material and the chalcogenide compound, thereby replacing oxygen in some of the oxygen-containing functional groups with chalcogen from the chalcogen-containing compound to yield a second material having chalcogen-containing functional groups and oxygen-containing functional groups. The first material is a carbonaceous material or a macromolecular material. A product including the second material is collected and may be processed further to yield a modified product or a composite.

  12. Tensile/Shear Behaviour of Multi-stitched/Nano Composites

    Science.gov (United States)

    Bilisik, Kadir; Kaya, Gaye

    2017-02-01

    This study aims to investigate tensile/shear behavior of multi-stitched/nano composites. For this purpose, non-stitched, non-stitched/nano, multi-stitched and multi-stitched/nano composites were made. It was shown that the warp/filling tensile strength and modulus of composites were slightly reduced in both multi-stitched and multi-stitched/nano composites due to fiber breakage that resulted from the multi-stitching process. In addition, there were not significant differences between non-stitched and multi-stitched structures. The non-stitched/nano composite showed slightly higher in-plane shear strength compared with the non-stitched composite. The in-plane shear strength of the non-stitched composite, on the other hand, increased steadily compared to the multi-stitched composite because of the stitching process and the interface between the stitching yarn and polymer matrix. Stitching significantly improved the delamination resistance in the multi-stitched and multi-stitched/nano composites experienced a small amount of damaged areas. The incorporation of nano silica improved the damage resistance of multi-stitched composites. Therefore, the damaged tolerance composite was developed with stitching and the addition of the nano silica for various industrial applications, such as electronic boards.

  13. Multifunctional Composite Materials Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Polymeric composite materials that are currently utilized in aircraft structures are susceptible to significant damage from lightning strikes. Enhanced electrical...

  14. Nano-Fiber Reinforced Enhancements in Composite Polymer Matrices

    Science.gov (United States)

    Chamis, Christos C.

    2009-01-01

    Nano-fibers are used to reinforce polymer matrices to enhance the matrix dependent properties that are subsequently used in conventional structural composites. A quasi isotropic configuration is used in arranging like nano-fibers through the thickness to ascertain equiaxial enhanced matrix behavior. The nano-fiber volume ratios are used to obtain the enhanced matrix strength properties for 0.01,0.03, and 0.05 nano-fiber volume rates. These enhanced nano-fiber matrices are used with conventional fiber volume ratios of 0.3 and 0.5 to obtain the composite properties. Results show that nano-fiber enhanced matrices of higher than 0.3 nano-fiber volume ratio are degrading the composite properties.

  15. ON THE EFFECT OF NANO-PARTICLE CLUSTERING ON TOUGHENING OF NANO-COMPOSITE CERAMICS

    Institute of Scientific and Technical Information of China (English)

    董照旭; 方岱宁; 苏爱嘉

    2002-01-01

    In this paper, two and three-dimensional clustering models are developed to characterize the effect of nano-particle clustering on toughening of nanocomposite ceramics. It is found that crack pinning toughens the nano-composite ceramics because a higher stress intensity factor is needed for crack to propagate around or to pull-out the nano-particle. The nano-particle along the grain boundary steers the crack into the matrix grain due to the strong cohesion between the nanoparticle and the matrix. Since the fracture resistance of the grain boundary is lower than that of the grain lattice, the higher the probability of transgranular fracture induced by nano-particles, the tougher is the nano-composite. However, both crack pinning and transgranular fracture are affected by nano-particle clustering. Nanoparticle clustering, which increases with increasing volume fraction of nano-particles,leads to reduction of both the strength and toughness of the nano-composite ceramics. The larger the size of the clustered particle, and the more defects it contains, the easier it is for the crack to pass through the clustered particle, which means that the nano-particle clustering can reduce toughening induced by crack pinning and transgranular fracture. The theoretical prediction, based on the combination of the three mechanisms of nano-particles, is in agreement with the experimental data.

  16. Biochar-based nano-composites for the decontamination of wastewater: A review.

    Science.gov (United States)

    Tan, Xiao-Fei; Liu, Yun-Guo; Gu, Yan-Ling; Xu, Yan; Zeng, Guang-Ming; Hu, Xin-Jiang; Liu, Shao-Bo; Wang, Xin; Liu, Si-Mian; Li, Jiang

    2016-07-01

    Synthesizing biochar-based nano-composites can obtain new composites and combine the advantages of biochar with nano-materials. The resulting composites usually exhibit great improvement in functional groups, pore properties, surface active sites, catalytic degradation ability and easy to separation. These composites have excellent abilities to adsorb a range of contaminants from aqueous solutions. Particularly, catalytic material-coated biochar can exert simultaneous adsorption and catalytic degradation function for organic contaminants removal. Synthesizing biochar-based nano-composites has become an important practice for expanding the environmental applications of biochar and nanotechnology. This paper aims to review and summarize the various synthesis techniques for biochar-based nano-composites and their effects on the decontamination of wastewater. The characteristic and advantages of existing synthesis methods are summarized and discussed. Application of biochar-based nano-composites for different contaminants removal and the underlying mechanisms are reviewed. Furthermore, knowledge gaps that exist in the fabrication and application of biochar-based nano-composites are also identified.

  17. Friction Material Composites Materials Perspective

    CERN Document Server

    Sundarkrishnaa, K L

    2012-01-01

    Friction Material Composites is the first of the five volumes which strongly educates and updates engineers and other professionals in braking industries, research and test labs. It explains besides the formulation of design processes and its complete manufacturing input. This book gives an idea of mechanisms of friction and how to control them by designing .The book is  useful for designers  of automotive, rail and aero industries for designing the brake systems effectively with the integration of friction material composite design which is critical. It clearly  emphasizes the driving  safety and how serious designers should  select the design input. The significance of friction material component like brake pad or a liner as an integral part of the brake system of vehicles is explained. AFM pictures at nanolevel illustrate broadly the explanations given.

  18. Preparation and lithium storage performance of nano Si/crumpled graphene composite material%纳米Si/褶皱石墨烯复合材料制备及储锂性能

    Institute of Scientific and Technical Information of China (English)

    李海; 吕春祥

    2015-01-01

    Crumpled graphene was prepared through freeze-drying, thermal annealing and HF treating the mixture suspension of graphene oxide and nano-SiO2. Nano-Si/crumpled graphene (SCG) composite material was prepared by dispersing nano-Si and crumpled graphene in ethanol solution and slowly drying the two materials. In SCG composite, Si nanoparticles were uniformly dispersed among crumpled graphene and surrounded by graphene networks. As the anode material for lithium ion batteries, the SCG exhibits high coulombic efficiency and good cycle stability of 1 003 mAh/g at the current density of 500 mA/g after 80 cycles. Such superior electrochemical perfor-mance should be attributed to high conductivity and good mechanical flexibility of crumpled graphene.%氧化石墨烯与纳米SiO2的混合悬浮液经过冷冻干燥、热退火和HF处理制得了褶皱石墨烯。将褶皱石墨烯与Si纳米颗粒在乙醇中分散后缓慢干燥制备了纳米Si/褶皱石墨烯(SCG)复合材料。Si纳米颗粒均匀分散于褶皱石墨烯中,并被石墨烯网络包围。作为锂离子电池负极材料,SCG具有高的库仑效率,在500 mA/g的电流密度下,80个循环后的比容量为1003 mAh/g,表现出良好的循环稳定性。如此优越的电化学性能要归因于褶皱石墨烯的高电导率和良好的机械柔韧性。

  19. Action of colloidal silica films on different nano-composites

    Science.gov (United States)

    Abdalla, S.; Al-Marzouki, F.; Obaid, A.; Gamal, S.

    Nano-composite films have been the subject of extensive work to develop the energy-storage efficiency of electrostatic capacitors. Factors such as polymer purity, nano-particles size, and film morphology drastically affect the electrostatic efficiency of the dielectric material that form an insulating film between conductive electrodes of a capacitor. This in turn affects the energy storage performance of the capacitor. In the present work, we have studied the dielectric properties of 4 high pure amorphous polymer films: polymethylmethacrylate (PMMA), polystyrene, polyimide and poly-4-vinylpyridine. Comparison between the dielectric properties of these polymers has revealed that the higher break down performance is a character of polyimide PI and PMMA. Also, our experimental data shows that adding colloidal silica to PMMA and PI leads to a net decrease in the dielectric properties compared to the pure polymer.

  20. Synthesis of nano-CaCO3 composite particles and their application

    Institute of Scientific and Technical Information of China (English)

    Wei Wu; Xueqin Zhang; Jianfeng Chen; Shuling Shen

    2008-01-01

    Nano-calcium carbonate composite particles were synthesized by the soapless emulsion polymerization technique of dou-ble monomers. The composite particles formation mechanism was investigated. The effects of composite particles on the mechanical properties of nano-CaCO3-ABS (acrylonitrile-butadiene-styrene copolymer) composite material were studied. It was validated that the composite particles are made up of the nano-calcium carbonate cores and the shells of alternating copolymers of butyl acrylate (BA) and styrene (St). The shells are chemically grafted and physically wrapped on the surface of nano-calcium carbonate particles.When the composite particles were filled in ABS matrix, the CaCO3 particles are homogeneously dispersed in the composite material as nanoscales. The impact strength of the composite material is obviously enhanced after idling appropriate amounts of composite particles. It can be concluded that the soapless emulsion polymerization of double monomers is an effective method for nano-CaCO3 surface treatment.

  1. Nano-photocatalytic materials: possibilities and challenges.

    Science.gov (United States)

    Tong, Hua; Ouyang, Shuxin; Bi, Yingpu; Umezawa, Naoto; Oshikiri, Mitsutake; Ye, Jinhua

    2012-01-10

    Semiconductor photocatalysis has received much attention as a potential solution to the worldwide energy shortage and for counteracting environmental degradation. This article reviews state-of-the-art research activities in the field, focusing on the scientific and technological possibilities offered by photocatalytic materials. We begin with a survey of efforts to explore suitable materials and to optimize their energy band configurations for specific applications. We then examine the design and fabrication of advanced photocatalytic materials in the framework of nanotechnology. Many of the most recent advances in photocatalysis have been realized by selective control of the morphology of nanomaterials or by utilizing the collective properties of nano-assembly systems. Finally, we discuss the current theoretical understanding of key aspects of photocatalytic materials. This review also highlights crucial issues that should be addressed in future research activities.

  2. Nano-Bio Quantum Technology for Device-Specific Materials

    Science.gov (United States)

    Choi, Sang H.

    2009-01-01

    The areas discussed are still under development: I. Nano structured materials for TE applications a) SiGe and Be.Te; b) Nano particles and nanoshells. II. Quantum technology for optical devices: a) Quantum apertures; b) Smart optical materials; c) Micro spectrometer. III. Bio-template oriented materials: a) Bionanobattery; b) Bio-fuel cells; c) Energetic materials.

  3. Magnetic Nano-Materials: Truly Sustainable Green Chemistry Nano Catalysis

    Science.gov (United States)

    We envisioned a novel nano-catalyst system, which can bridge the homogenous and heterogeneous system, and simultaneously be cheaper, easily accessible (sustainable) and possibly does not require elaborate work-up. Because of its nano-size, i.e. high surface area, the contact betw...

  4. In-situ functionalized monolithic polysiloxane-polymethacrylate composite materials from polythiol-ene double click reaction in capillary column format for enantioselective nano-high-performance liquid chromatography.

    Science.gov (United States)

    Wolter, Marc; Lämmerhofer, Michael

    2017-05-12

    This work reports on the proof-of-principle of preparation of novel one step in-situ functionalized monolithic polysiloxane-polymethacrylate composite materials in capillary columns for enantioselective nano-HPLC using a thiol-ene click reaction. Quinine carbamate as functional monomer and ethylene dimethacrylate as crosslinker were both used as ene components in a thermally initiated double click-type polymerization reaction with poly(3-mercaptopropyl)methylsiloxane as thiol component in presence of 1-propanol as porogenic solvent. Elemental analysis and on-capillary fluorescence measurement proved the successful incorporation of the functional chiral monomer into the polymer. Scanning electron microscopy images revealed a macroporous polymer morphology which is typical for a nucleation and growth mechanism of pore formation. The individual microglobules appear relatively spherical and smooth indicating a non-porous nature. Nano-HPLC experiments of the chiral monolithic capillary column provided successful enantiomer separation of N-3,5-dinitrobenzoylleucine as test compound in polar organic elution mode clearly documenting the successful implementation of the proposed concept towards new functionalized monolithic composite materials. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. GA/AN 纳米复合含能材料的制备与表征%Preparation and Characterization of Graphene Aerogel/Ammonium Nitrate Nano Composite Energetic Materials

    Institute of Scientific and Technical Information of China (English)

    兰元飞; 罗运军

    2015-01-01

    The graphene aerogel/ammonium nitrate (GA/AN)nano composite energetic material was prepared by the sol-gel method and supercritical CO2 drying method.The morphology and structure of GA/AN nano composite energetic material were characterized by elemental analysis (EA),scanning electron microscope (SEM),nitrogen sorption tests and X-ray diffraction (XRD).The thermal decomposition behavior was investigated by TG and DSC. The results show that AN exists by nano size in the GA with an average particle size of 71 nm,mass fraction of 92.71%.GA exhibits the promoting effects in the thermal decomposition process of AN.Compared to pure AN, the decomposition peak temperature of GA/AN nano composite energetic material decreases by 33.68℃ and the apparent heat of decomposition increases by 532.78 J/g.%通过溶胶-凝胶法和超临界二氧化碳干燥法制备了石墨烯气凝胶/硝酸铵(GA/AN)纳米复合含能材料。采用元素分析(EA)、扫描电子显微镜(SEM)、N2吸附测试和 X 射线衍射(XRD)对 GA/AN 纳米复合含能材料的形貌和结构进行了表征,用 TG 和 DSC 测试了其热分解性能。结果表明,在 GA/AN 纳米复合含能材料中,AN 以纳米尺寸存在于石墨烯气凝胶中,平均粒径为71 nm,质量分数为92.71%。石墨烯对 AN 的热分解具有促进作用,与纯 AN 相比,GA/AN 纳米复合含能材料的热分解温度提前33.68℃,表观分解热增加了532.78 J/g。

  6. Nano-islands on a composite substrate with misfit dislocations

    Science.gov (United States)

    Ovid'ko, I. A.; Sheinerman, A. G.

    Spatial arrangements of nano-islands (quantum dots) on the free surface of a composite two-layer substrate containing misfit dislocations of edge type are theoretically examined. It is shown that the elastic interaction between misfit dislocations and nano-islands is capable of causing coagulation of nano-islands. The coagulation of nano-islands is shown to be favourable when the upper-layer thickness is smaller than a critical thickness, H0. An analytical form of H0 is presented for the partial case with four-to-one correspondence between nano-islands and cells of the misfit dislocation network.

  7. The development and application of carbon nano composite material%浅谈碳纳米复合材料的应用与发展

    Institute of Scientific and Technical Information of China (English)

    彭复俊

    2013-01-01

      本文介绍一些碳纳米纤维管的应用与发展,综述了碳纳米纤维管/聚合物复合材料的制备方法及其聚合物结构复合材料和聚合物功能复合材料中的应用研究情况,在此基础上,分析了碳纳米纤维管在复合材料制备过程中的纯化、分散、损伤和界面等问题,并展望了今后碳纳米及复合材料的发展前景。%The article introduces the structure and properties of carbon nanotubes,carbon nanotube/polymer composites are reviewed in this paper the preparation methods and the structure of polymer composite materials and the application of polymer functional composite materials research situation,on this basis,the analysis of carbon nanotubes in the process of composite material preparation,purification, dispersion,damage and interface problems,and prospects the future development trend of the carbon nanotubes/polymer composites.

  8. Report on Carbon Nano Material Workshop: Challenges and Opportunities

    Science.gov (United States)

    2013-01-22

    Lubricating Grease Thickened by Carbon Nanotubes, presented at Carbon Nano Materials and Applications Workshop, Rapid City, SD, October 31–November 1...Carbon Nano Material Workshop: Challenges and Opportunities S. Acharya a , J. Alvarado b , D. Banerjee b , W. E. Billups c , G. Chen d , B. A. Cola e...Carbon Nano Material Workshop: Challenges and Opportunities 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d

  9. Recent Development of Nano-Materials Used in DNA Biosensors

    Directory of Open Access Journals (Sweden)

    Yibin Ying

    2009-07-01

    Full Text Available As knowledge of the structure and function of nucleic acid molecules has increased, sequence-specific DNA detection has gained increased importance. DNA biosensors based on nucleic acid hybridization have been actively developed because of their specificity, speed, portability, and low cost. Recently, there has been considerable interest in using nano-materials for DNA biosensors. Because of their high surface-to-volume ratios and excellent biological compatibilities, nano-materials could be used to increase the amount of DNA immobilization; moreover, DNA bound to nano-materials can maintain its biological activity. Alternatively, signal amplification by labeling a targeted analyte with nano-materials has also been reported for DNA biosensors in many papers. This review summarizes the applications of various nano-materials for DNA biosensors during past five years. We found that nano-materials of small sizes were advantageous as substrates for DNA attachment or as labels for signal amplification; and use of two or more types of nano-materials in the biosensors could improve their overall quality and to overcome the deficiencies of the individual nano-components. Most current DNA biosensors require the use of polymerase chain reaction (PCR in their protocols. However, further development of nano-materials with smaller size and/or with improved biological and chemical properties would substantially enhance the accuracy, selectivity and sensitivity of DNA biosensors. Thus, DNA biosensors without PCR amplification may become a reality in the foreseeable future.

  10. Micro-and nano-structured conducting polymeric materials

    Institute of Scientific and Technical Information of China (English)

    LU Gewu; CHEN Feng'en; WU Xufeng; QU Liangti; ZHANG Jiaxin; SHI Gaoquan

    2005-01-01

    Conducting polymeric materials with micro-/nano-structures have potential applications in fabrication of various optical, electronic, sensing and electrochemical devices. This is mainly because these materials not only possess the characteristics of conducting polymers, but also have special functions based on their micro- or nano-structures. In this review, we summarize the recent work on "soft" and "hard" template-guided syntheses of micro-/nano-structured conducting polymers and open up the prospects of the main trends in this field.

  11. Nano-composite magnetic material embedded on TiO2 pillars to realize magneto-optical resonant guided mode gratings

    Science.gov (United States)

    Varghese, B.; Gamet, E.; Jamon, D.; Neveu, S.; Berthod, L.; Shavdina, O.; Reynaud, S.; Verrier, I.; Veillas, C.; Royer, F.

    2016-02-01

    Periodic structuration of magnetic material is a way to enhance the magneto-optical behavior of optical devices like isolators. It is useful to reduce the footprint of such integrated devices or to improve their features. However, the structuration and/or integration of efficient magnetic materials on photonic platforms is still a difficult problem, because classical magneto-optical materials require an annealing temperature as high as 700°C. A novel wafer-scale approach is to incorporate that material into an already structured template through a single step deposition at low temperature. Using the dip-coating method, a magneto-optical thin film (~300nm) of CoFe2O4 nanoparticles in silica matrix prepared by sol-gel technique was coated on a 1D and 2D TiO2 subwavelength gratings. Such gratings were realized by the patterning of TiO2 films obtained by a sol-gel process. It was confirmed by Scanning Electron Microscope images that the magneto-optical composite completely occupies the voids of the 2D structuration showing a good compatibility between both materials. This composite shows a specific Faraday rotation of about 200°cm-1 at 1,5μm for 1% of volume fraction of nanoparticles. Spectral studies of the transmission and the reflection of a 1D TiO2 grating filled with the MO composite have evidenced the presence of a guided-mode optical resonance at 1,55μm. The position of this resonance was confirmed by numerical simulations, as well as its quite low efficiency. Based on simulations results, one can conclude that an increase of the grating depth is required to improve the efficiency of the resonance.

  12. Co-suppression of vitamin C composite nano-drug carrier and its drug delivery to nidus in tumor cells.

    Science.gov (United States)

    Liu, H Z; Liu, X M; Liu, X C; Zhang, C Z; Liu, H Q

    2016-01-01

    This study aimed to discuss the co-suppression of vitamin C-contained composite nano-drug carrier and its drug delivery to nidus in tumor cells. Amphiphilic polymers PLA-block-PAAA and block polymer PLA-PEG4000-Maleimide, PLA-block-PAAA and PLA-PEG4000-Maleimide composite nano-micelles were prepared, and, PLA-block-PAAA polymer-coated Nile red nano-micelle, PLA-block-PAA and PLA-PEG4000-Maleimide composite nano-micelles as well as paclitaxel-carrying composite nano-micelle in different molar ratios were given stability tests. Lastly, PLA-block-PAAA and PLA-PEG4000-Maleimide composite nano-micelle cancer cells and paclitaxel-carrying composite nano-micelle cancer cells were given toxicity tests. Stability tests showed that self stability of PLA-block-PAAA (63/8) nano-micelle was not sufficient; the stability was good when the molar ratio of PLA-block-PAAA and PLA-PEG4000-Maleimide composite nano-micelle was 3:1; paclitaxel-carrying composite nano-micelle had good stability within 48 hours; PAAA segment had an inhibiting effect on C6 cancer cells and paclitaxel-carrying composite nano-micelle had a strong inhibiting effect also on tumors. After 24 hours, with the continuous release of paclitaxel, the tumor inhibiting effect of paclitaxel-carrying composite nano-micelle enhanced gradually, and the controlled-release of drugs had continuous inhibiting effect on tumor cells. Therefore, PAAA segment and paclitaxel had time-postponed synergistic effect. In conclusion, vitamin C-contained composite nanometer drug carrier materials can deliver anti-cancer drugs to nidus and thus inhibit tumor cells.

  13. Nanostructured composite reinforced material

    Science.gov (United States)

    Seals, Roland D [Oak Ridge, TN; Ripley, Edward B [Knoxville, TN; Ludtka, Gerard M [Oak Ridge, TN

    2012-07-31

    A family of materials wherein nanostructures and/or nanotubes are incorporated into a multi-component material arrangement, such as a metallic or ceramic alloy or composite/aggregate, producing a new material or metallic/ceramic alloy. The new material has significantly increased strength, up to several thousands of times normal and perhaps substantially more, as well as significantly decreased weight. The new materials may be manufactured into a component where the nanostructure or nanostructure reinforcement is incorporated into the bulk and/or matrix material, or as a coating where the nanostructure or nanostructure reinforcement is incorporated into the coating or surface of a "normal" substrate material. The nanostructures are incorporated into the material structure either randomly or aligned, within grains, or along or across grain boundaries.

  14. Hydrogen storage properties of nano-composites of Mg and Zr-Ni-Cr alloys

    Energy Technology Data Exchange (ETDEWEB)

    Yang, J.; Ciureanu, M.; Roberge, R. [H Power Enterprises of Canada, 1069 Begin Street, St. Laurent, Quebec (Canada)

    2000-05-01

    Mg and Zr-Ni-Cr alloy nano-composite hydrogen storage materials have been prepared by high energy mechanical milling (MM) of Mg powders with either crystalline ZrNiCr and ZrNi{sub 1.6}Cr{sub 0.4} powders or mechanically milled amorphous ZrNiCr and ZrNi{sub 1.6}Cr{sub 0.4} powders. Nano-composites of amorphous Zr-Ni-Cr alloy and Mg have better desorption kinetics compared to crystalline Zr-Ni-Cr alloy and Mg nano-composites. Amorphous ZrNi{sub 1.6}Cr{sub 0.4} and Mg nano-composites desorb larger amount of H{sub 2} much faster than amorphous ZrNiCr and Mg nano-composites. The nano-composite of 35 wt.% amorphous ZrNi{sub 1.6}Cr{sub 0.4} and Mg releases 4.3 wt.% H{sub 2} at 300C in 30 min. X-ray diffraction revealed that there are no reactions between Mg and Zr-Ni-Cr alloys in the milling, activation, and subsequent cycling processes, proving that amorphous ZrNi{sub 1.6}Cr{sub 0.4} is an effective hydrogen absorption and desorption catalyst.

  15. Nano-FTIR chemical mapping of minerals in biological materials

    Directory of Open Access Journals (Sweden)

    Sergiu Amarie

    2012-04-01

    Full Text Available Methods for imaging of nanocomposites based on X-ray, electron, tunneling or force microscopy provide information about the shapes of nanoparticles; however, all of these methods fail on chemical recognition. Neither do they allow local identification of mineral type. We demonstrate that infrared near-field microscopy solves these requirements at 20 nm spatial resolution, highlighting, in its first application to natural nanostructures, the mineral particles in shell and bone. "Nano-FTIR" spectral images result from Fourier-transform infrared (FTIR spectroscopy combined with scattering scanning near-field optical microscopy (s-SNOM. On polished sections of Mytilus edulis shells we observe a reproducible vibrational (phonon resonance within all biocalcite microcrystals, and distinctly different spectra on bioaragonite. Surprisingly, we discover sparse, previously unknown, 20 nm thin nanoparticles with distinctly different spectra that are characteristic of crystalline phosphate. Multicomponent phosphate bands are observed on human tooth sections. These spectra vary characteristically near tubuli in dentin, proving a chemical or structural variation of the apatite nanocrystals. The infrared band strength correlates with the mineral density determined by electron microscopy. Since nano-FTIR sensitively responds to structural disorder it is well suited for the study of biomineral formation and aging. Generally, nano-FTIR is suitable for the analysis and identification of composite materials in any discipline, from testing during nanofabrication to even the clinical investigation of osteopathies.

  16. Repair of rabbit cartilage defect based on the fusion of rabbit bone marrow stromal cells and Nano-HA/PLLA composite material.

    Science.gov (United States)

    Zhu, Weimin; Guo, Daiqi; Peng, Liangquan; Chen, Yun Fang; Cui, Jiaming; Xiong, Jianyi; Lu, Wei; Duan, Li; Chen, Kang; Zeng, Yanjun; Wang, Daping

    2017-02-01

    Objective To assess the effect of the fusion of rabbit bone marrow stromal cells (rBMSCs) and Nano-hydroxyapatite/poly (l-lactic acid) (Nano-HA/PLLA) in repairing the rabbit knee joint with full-thickness cartilage defect. Method The rBMSCs were isolated and cultured in vitro, and the third generation of rBMSCs was co-cultured with the Nano-HA/PLLA to construct the tissue-engineered cartilage (TEC). Eighteen New Zealand white rabbits were selected and randomly divided into three groups, namely, TEC group, Nano-HA/PLLA group, and control group. A cartilage defect model with the diameter of 4.5 mm and depth of 5 mm was constructed on the articular surface of medial malleolus of rabbit femur. General observation, histological observation, and Wakitani's histological scoring were conducted in the 12th and 24th week postoperatively. Results The results of TEC group indicated that new cartilage tissue was formed on the defect site and subchondral bone achieved physiological integration basically. Histological and immunohistochemical analyses indicated the generation of massive extracellular matrix. In contrast, limited regeneration and reconstruction of cartilage was achieved in the Nano-HA/PLLA group and control group, with a significant difference from the TEC group (p Nano-HA/PLLA combined with BMSCs promoted the repair of weight-bearing bone of adult rabbit's knee joint with cartilage defect.

  17. 聚乙烯醇纳米复合膜中残留戊二醛含量的测定%Determination of residual glutaraldehyde in polyvinyl alcohol composite nano-packaging material

    Institute of Scientific and Technical Information of China (English)

    尹月玲; 章建浩

    2012-01-01

    戊二醛作为聚乙烯醇基纳米复合包装材料的交联剂能提高纳米复合材料的综合包装性能,但戊二醛的残留会影响食品包装材料的安全性。对聚乙烯醇纳米复合膜样品采用超声萃取其中残留的戊二醛,并与2,4-二硝基苯肼(DNPH)衍生化后,用高效液相色谱法(HPLC)检测其残留出的戊二醛含量,结果显示:该方法在0.2-5.0mg/L范围内线性相关系数为r^2=0.9997,平均回收率达到76.8%-87.3%,相对标准偏差为2.83%-4.08%,最低检测浓度为0.2mg/kg,说明采用的萃取条件及色谱分析方法适合聚乙烯醇基纳米复合膜中戊二醛残留量的测定;待测聚乙烯醇基纳米复合膜中残留戊二醛的含量24.55mg/kg,符合食品包装材料安全限量标准。%Glutaraldehyde was crosslinker of polyvinyl alcohol(PVA) composite nano-packaging material and it improved synthetic properties of packing, but residual glutaraldehyde might affect safety of composite nano- packaging material.The extraction was carried out with ultrasound.The extracted glutaraldehyde was derivatized with 2,4-dinitrophenylhydrazine(DNPH) and the derivative was analyzed by HPLC.It showed that in the range of glutaraldehyde content of 0.2-5.0mg/L, the method was fast and accurate with a linear correlation of 0.9997, average recoveries of 76.8%~87.3% ,a relative standard deviation of 2.83%-4.08% and a minimum determination concentration of 0.2mg/kg.The procedures were suitable for the determination of residual glutaraldehyde in polyvinyl alcohol composite nano-packaging material. The residual glutaraldehyde of PVA composite nano- packaging sample was 24.55mg/kg and met the safety limit criterion of food-packaging material.

  18. Properties and Osteogenicity of Two Calcium Sulfate Materials with Micro or Nano Morphology.

    Science.gov (United States)

    Zhang, Chunli; Li, Zhonghai; Li, Qihong; Han, Liwei; Zhu, Jialiang; Bai, Yulong; Ge, Cheng; Zhao, Yantao; Zhong, Hongbin

    2016-03-01

    Calcium sulfate dihydrate (CaSO4 x 2H2O, CSD) was widely used as the artificial bone graft. In this study, two kinds of CSD materials were characterized with XRD, TG/DTA, FT-IR, and SEM. They were both composed of CSD. Spherical shape particles were observed for nano-CSD with diameters of 52-300 nm. The micro-CSD were thin sheet particles with dimensions of 5-10 μm. At 56 days post-implantation in vivo, nano-CSD had good tissue compatibility. A frequently used bioactive material DBM, which was the combination of nano-CSD (nano-CSD-DBM) and micro-CSD (micro-CSD-DBM) in a 1:1 weight ratio separately. Composite materials were implanted in intramuscular pockets in nude mouse model. New bone mineralization could be both observed in the surgery site. Collagen I was also widely distributed by immunohistochemistry assay. And new bone area of nano-CSD-DBM was 28 ± 4.6% at 4 weeks post-operation. But new bone area of micro-CSD-DBM was 16 ± 3.7% (less than nano-CSD-DBM). Nano-CSD showed increased degradation rate with obvious anginogenicity. And nano-CSD-DBM showed more excellent bone induction property as bone substitute implant.

  19. Polyetheretherketone/nano-fluorohydroxyapatite composite with antimicrobial activity and osseointegration properties.

    Science.gov (United States)

    Wang, Lixin; He, Shu; Wu, Xiaomian; Liang, Shanshan; Mu, Zhonglin; Wei, Jie; Deng, Feng; Deng, Yi; Wei, Shicheng

    2014-08-01

    Lack of antibacterial activity and binding ability to natural bone tissue has significantly limited polyetheretherketone (PEEK) for many challenging dental implant applications. Here, we have developed a polyetheretherketone/nano-fluorohydroxyapatite (PEEK/nano-FHA) biocomposite with enhanced antibacterial activity and osseointegration through blending method. Smooth and rough surfaces of PEEK/nano-FHA biocomposites were also prepared. Our results showed that in vitro initial cell adhesion and proliferation on the nano-FHA reinforced PEEK composite were improved. In addition, higher alkaline phosphatase activity and cell mineralization were also detected in cells cultured on PEEK/nano-FHA biocomposites, especially for rough PEEK/nano-FHA surfaces. More importantly, the as-prepared PEEK/nano-FHA biocomposite could effectively prevent the proliferation and biofilm formation of bacterial. For in vivo test, the newly formed bone volume of PEEK/nano-FHA group was higher than that of bare PEEK group based on 3D microcomputed tomography and 2D histomorphometric analysis. These reports demonstrate that the developed PEEK/nano-FHA biocomposite has increased biocompatibility and antibacterial activity in vitro, and promoted osseointegration in vivo, which suggests that it holds potential to be applied as dental implant material in dental tissue engineering applications.

  20. 纳米复合树脂和光固化复合树脂材料用于前牙美容修复的效果比较%Effect of Nano-Composite Resin Material and Light-Cured Composite Resin Material on Cosmetic Restoration of Anterior Teeth

    Institute of Scientific and Technical Information of China (English)

    王玫

    2014-01-01

    目的:比较纳米复合树脂材料和光固化复合树脂材料用于前牙美容修复的效果。方法选择接受前牙美容修复的患者100例作为研究对象,分别使用光固化复合树脂材料及纳米复合树脂材料,比较治疗后牙齿敏感发生率及自觉疼痛评分差异。结果观察组治疗后1 d、1周、1个月牙齿敏感发生率分别为8.00%,6.00%,4.00%,均明显低于对照组( P﹤0.05);平均疼痛评分为(2.63±0.72)分,并发症发生率为22.22%,均明显低于对照组( P﹤0.05);优良率为88.00%,满意度为92.00%,均明显高于对照组( P﹤0.05)。结论纳米复合树脂材料用于患者前牙美容修复可有效降低近期牙齿敏感发生率,减轻自觉疼痛感受,优于光固化复合树脂材料。%Objective To compare the effect of the nano-composite resin material and the light-cured composite resin material on cosmetic restoration of anterior teeth. Methods The 100 patients receiving cosmetic restoration of anterior teeth were selected as the research subjects and used the light-cured composite resin materials and the nano-composite resin materials respectively. The occur-rence rates of the tooth sensitivity and the perceived pain scores after therapy were compared between the two kinds of materi-als. Results The occurrence rates of the teeth sensitive on 1 d' 1 week' 1 month after treatment in the observation group were 8. 00%' 6. 00% and 4. 00% respectively' which were significantly lower than those in the control group ( P﹤0. 05 ) . The average pain scores in the observation group were ( 2. 63 ± 0. 72 ) and the occurrence rate of complications was 22. 22%' which were significantly lower than those in the control group ( P﹤0. 05 ) . The excellent rate in the observation group was 88. 00% and the satisfaction was 92. 00%' which were significantly higher than those in the control group( P﹤0. 05). Conclusion Nano-composite resin can effectively

  1. Preparation and performance of ZnO/Polyaniline nano-composite for supercapacitor

    Energy Technology Data Exchange (ETDEWEB)

    Yu, S.P.; Chang, X.C.; Wang, Z.M.; Han, K.F.; Zhu, H. [Beijing Univ. of Chemical Technology, Beijing (China). School of Science

    2010-07-01

    Supercapacitors combine the advantages of traditional capacitors and batteries. In this study, a zinc oxide (ZnO-PANI) nano-composite material was fabricated in order to investigate its behaviour in a supercapacitor application. The ZnO nano-powder was synthesized using the sol-gel method. An inverted emulsion polymerization method was then used to prepare the ZnO/PANI nanocomposite. X-ray diffraction (XRD) analyses demonstrated that the prepared ZnO had a hexagonal structure. The ZnO/PANI composite electrode was prepared. Electrochemical impedance spectroscopy (EIS) analyses indicated that the nano-composite material functioned well as an electrode. The highest capacitance rating achieved by the electrode was 31.82 F per g. 6 refs., 4 figs.

  2. Synthesis of nano B{sub 2}O{sub 3}/TiO{sub 2} composite material as a new solid phase extractor and its application to preconcentration and separation of cadmium

    Energy Technology Data Exchange (ETDEWEB)

    Kalfa, Orhan Murat; Yalcinkaya, Ozcan [Gazi University, Science and Art Faculty, Department of Chemistry, 06500, Ankara (Turkey); Tuerker, Ali Rehber, E-mail: aturker@gazi.edu.tr [Gazi University, Science and Art Faculty, Department of Chemistry, 06500, Ankara (Turkey)

    2009-07-15

    A new solid phase extractor, nano-scale diboron trioxide/titanium dioxide composite material, was synthesized and used for separation and/or preconcentration of trace cadmium ion from various samples. The characterization of the synthesized material was performed by scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray diffractometer methods (XRD). The specific surface area of the material was also determined and found as 3.4 m{sup 2}/g. Analytical parameters including pH of sample solution, sample volume, flow rate of sample solution, volume and concentration of eluent for the column solid phase extraction (SPE) procedure were examined. The effect of common matrix ions on the recovery of the cadmium has also been investigated and found that they did not interfere on cadmium preconcentration. Under the optimum experimental conditions, preconcentration factor and analytical detection limit were determined as 50 and 1.44 {mu}g/L, respectively. The reusability (stabile up to 100 run) and adsorption capacity (49 mg/g) of the sorbent were excellent. The accuracy of the method was confirmed by analyzing certified reference materials (Tea leaves GBW-07605). The results demonstrated good agreement with the certified values (relative error <10%). The precision of the method was also satisfactory. The recovery of cadmium under the optimum conditions was found to be 96 {+-} 3% at 95% confidence level. The method was applied for the determination of cadmium in tap water and tea leaves.

  3. Challenge to Electron Microprobe Analysis by Nano-features in Geo-materials

    Science.gov (United States)

    Ma, C.; Rossman, G. R.

    2007-12-01

    With current high-resolution analytical scanning electron microscope and transmission electron microscope technology, nano-features (i.e., inclusions, exsolutions, pores) are being discovered in many common geo- materials routinely analyzed by EPMA. Most EPMA instruments have a thermionic electron gun with a tungsten "hairpin" type filament and operate at such high probe currents that they do not produce the high resolution imaging that field emission SEMs do. Such nano-features present difficulties to electron microprobe analysis of the host materials. It is an accuracy issue. Presented here are a few examples. Nano-inclusions like magnetite or pyroxene are common in volcanic glass. Massive rose quartz contains nano-fibers of a dumortierite-related phase that is pink, which is the cause of rose color and optical star effects. Blue quartz has nano-inclusions of ilmenite. Nano-exsolutions and nano-inclusions occur in some feldspars (moonstone and sunstone). Nano- pores in corundum and opals are observed. Thin coatings of nanocrystals on grains of hematite bring Al and P (or As) into the analytical picture. In each of these cases, electron microprobe analyses of host materials were contaminated or affected by the nano-features. For a complete analytical description of a geo-material it is necessary to first examine probe samples under an optical microscope (400× minimum) and a FE-SEM. If the sample contains nano-features, it would then be necessary to combine FIB and TEM-EDS-EELS to comprehensively analyze the host composition.

  4. Studies on Effective Elastic Properties of CNT/Nano-Clay Reinforced Polymer Hybrid Composite

    Science.gov (United States)

    Thakur, Arvind Kumar; Kumar, Puneet; Srinivas, J.

    2016-02-01

    This paper presents a computational approach to predict elastic propertiesof hybrid nanocomposite material prepared by adding nano-clayplatelets to conventional CNT-reinforced epoxy system. In comparison to polymers alone/single-fiber reinforced polymers, if an additional fiber is added to the composite structure, it was found a drastic improvement in resultant properties. In this regard, effective elastic moduli of a hybrid nano composite are determined by using finite element (FE) model with square representative volume element (RVE). Continuum mechanics based homogenization of the nano-filler reinforced composite is considered for evaluating the volumetric average of the stresses and the strains under different periodic boundary conditions.A three phase Halpin-Tsai approach is selected to obtain the analytical result based on micromechanical modeling. The effect of the volume fractions of CNTs and nano-clay platelets on the mechanical behavior is studied. Two different RVEs of nano-clay platelets were used to investigate the influence of nano-filler geometry on composite properties. The combination of high aspect ratio of CNTs and larger surface area of clay platelets contribute to the stiffening effect of the hybrid samples. Results of analysis are validated with Halpin-Tsai empirical formulae.

  5. Nano active materials for lithium-ion batteries

    Science.gov (United States)

    Wang, Yonggang; Li, Huiqiao; He, Ping; Hosono, Eiji; Zhou, Haoshen

    2010-08-01

    Lithium-ion batteries have been widely used to power portable electronic devices, such as mobile phones, digital cameras, laptops etc., and are considered to be a promising choice of power system for the next generation of electric vehicles, which are central to the reduction of CO2 emissions arising from transport. In order to increase energy and power density to meet the future challenges of energy storage, many efforts have been made to develop nano active materials for lithium-ion batteries. Herein we review the advantages of nano active materials for lithium-ion batteries. Moreover, some disadvantages of nano active materials and their solutions are also discussed.

  6. Electrochemical performance of 2D polyaniline anchored CuS/Graphene nano-active composite as anode material for lithium-ion battery.

    Science.gov (United States)

    Iqbal, Shahid; Bahadur, Ali; Saeed, Aamer; Zhou, Kebin; Shoaib, Muhammad; Waqas, Muhammad

    2017-09-15

    Lithium-ion battery (LIB) is a revolutionary step in the electric energy storage technology for making green environment. In the present communication, a LIB anode material was constructed by using graphene/polyaniline/CuS nanocomposite (GR/PANI/CuS NC) as a high-performance electrode. Initially, pure covellite CuS nanoplates (NPs) of the hexagonal structure were synthesized by hydrothermal route and then GR/PANI/CuS NC was fabricated by in-situ polymerization of aniline in the presence of CuS NPs and graphene nanosheets (GR NSs) as host matrix. GR/PANI/CuS NC-based LIB has shown the superior reversible current capacity of 1255mAhg(-1), a high cycling stability with more than 99% coulombic efficiency over 250 cycles even at a high current density of 5Ag(-1), low volume expansion, and excellent power capabilities. Galvanostatic charge/discharge tests and cyclic voltammetry analysis were used to investigate electrochemical properties. The electrochemical test proves that GR/PANI/CuS NC is promising anode material for LIB. The crystal phases and purity of the GR/PANI/CuS NC were confirmed by X-ray diffraction (XRD). Scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) were employed to examine the morphology, size, chemical composition, and phase structure of the synthesized GR/PANI/CuS NC. Copyright © 2017. Published by Elsevier Inc.

  7. Deformation and failure mechanism of nano-composite coatings under nano-indentation

    NARCIS (Netherlands)

    Galvan, D.; Pei, Y.T.; Hosson, J.Th.M. De

    2006-01-01

    Two nano-composite coatings based on nc-TiC particles in an a-C:H matrix are deposited via closed-field unbalanced reactive magnetron sputtering. The compositions of the coatings are varied by changing the acetylene gas flow during the depositions. A Cr/Cr-Ti/Ti-TiC graded interlayer is introduced b

  8. Biotechnology and Composite Materials

    Science.gov (United States)

    1993-04-01

    Biotechnology, in general terms, is the science and engineering of using living organisms for making useful products such as pharmaceuticals, foods , fuels...chemicals, materials or in waste treatment processes and clinical and chemical analyses. It encompases the prosaic form of using yeast cells to make...ductile component of the composite. Table 1. Mechanical Properties of Ceramics, Cermets, and Abalone Shell •if KIC Hardness MPa MPam 1n 2 /2 Mohs KIlN

  9. Strategies for Tuning the Reactivity of NanoEnergetic Materials

    Science.gov (United States)

    Prakash, Anand

    2005-07-01

    Nanostructured fuel/oxidizer composites are being looked upon as a possible approach to enhance energy release rates. Here we report on two approaches to moderate/tune reactivity. In the first example we accelerate reactivity. The method is based on electrostatically enhanced assembly to promote the preferential arrangement of aluminum (fuel) nanoparticles with iron oxide (oxidizer) nanoparticles in the aerosol phase. Two unipolar chargers are employed to generate oppositely charged aluminum and iron oxide particles, which enhance the formation of intimately interconnected nanocomposite energetic materials. The results of burning tests and thermal analysis using differential scanning calorimetry (DSC) showed that aluminum/iron oxide nanocomposite aerosol materials synthesized by bipolar assembly had burning rates that are a factor of 10 higher than those produced by random Brownian coagulation. In a second approach we employ a very reactive oxidizer (Potassium permanganate; ˜150 nm) and create a less reactive shell (Iron oxide). The measured reactivity for a nano-Al/composite oxidizer could be varied by more than a factor of 10 as measured by the pressurization rate in a closed vessel (Psi/microsecond), by changing the coating thickness of the iron oxide. The composite oxidizer nanoparticles were synthesized by a new aerosol approach, where the non-wetting interaction between iron oxide and molten potassium permanganate aids the phase segregation of a nanocomposite droplet into a core-shell structure.

  10. Nano-tribology and materials in MEMS

    CERN Document Server

    Satyanarayana, N; Lim, Seh

    2013-01-01

    This book brings together recent developments in the areas of MEMS tribology, novel lubricants and coatings for nanotechnological applications, biomimetics in tribology and fundamentals of micro/nano-tribology. Tribology plays important roles in the functioning and durability of machines at small length scales because of the problems associated with strong surface adhesion, friction, wear etc. Recently, a number of studies have been conducted to understand tribological phenomena at nano/micro scales and many new tribological solutions for MEMS have been proposed.

  11. MULTIFUNCTIONAL NANO-BIO MATERIALS WITHIN CELLULAR MACHINERY.

    Science.gov (United States)

    Rozhkova, E A; Ulasov, I V; Kim, D-H; Dimitrijevic, N M; Novosad, V; Bader, S D; Lesniak, M S; Rajh, T

    2011-08-01

    Functional nanoscale materials that possess specific physical or chemical properties can leverage energy transduction in vivo. Once these materials integrate with biomolecules they combine physical properties of inorganic material and the biorecognition capabilities of bio-organic moieties. Such nano-bio hybrids can be interfaced with living cells, the elementary functional units of life. These nano-bio systems are capable of bio-manipulation or actuation via altering intracellular biochemical pathways. Thus, nano-bio conjugates are appealing for a wide range of applications from the life sciences and nanomedicine to catalysis and clean energy production. Here we highlight recent progress in our efforts to develop smart nano-bio hybrid materials, and to study their performance within cellular machinery under application of external stimuli, such as light or magnetic fields.

  12. Boron-Based (Nano-Materials: Fundamentals and Applications

    Directory of Open Access Journals (Sweden)

    Umit B. Demirci

    2016-09-01

    Full Text Available The boron (Z = 5 element is unique. Boron-based (nano-materials are equally unique. Accordingly, the present special issue is dedicated to crystalline boron-based (nano-materials and gathers a series of nine review and research articles dealing with different boron-based compounds. Boranes, borohydrides, polyhedral boranes and carboranes, boronate anions/ligands, boron nitride (hexagonal structure, and elemental boron are considered. Importantly, large sections are dedicated to fundamentals, with a special focus on crystal structures. The application potentials are widely discussed on the basis of the materials’ physical and chemical properties. It stands out that crystalline boron-based (nano-materials have many technological opportunities in fields such as energy storage, gas sorption (depollution, medicine, and optical and electronic devices. The present special issue is further evidence of the wealth of boron science, especially in terms of crystalline (nano-materials.

  13. ZnTiO3-TiO2纳米复合材料的光催化性能%Photocatalytic Property of ZnTiO3-TiO2 Nano-composite Materials

    Institute of Scientific and Technical Information of China (English)

    苏碧桃; 朱平武; 许晶晶; 赵丽

    2011-01-01

    ZnTiO3-TiO2 nano-composite photocatalytic materials were prepared via a Sol-Gel method and characterized by transmission electron microscope(TEM) , X-ray diffractometry(XRD) , UV-Vis spectrum and zeta(ζ) potential. The influences of light source and calcination temperature on the photocatalytic property of the nano-composite materials was investigated by decolorizing degradation of methylene blue (MB) solution as a probe. The results exhibit that the catalytic activity of the as-prepared material depends on the particle size, dispersibility in solution as well as the superficial charge. On the surface of the ZnTiO3-TiO2 obtained by calcinin at 600℃ for 3 h, which can disperse well in solution and has an average particle size of 60 nm and highest negative charge, decolorizing efficiency of MB solution was up to 93% under sunlight radiation for 7 h while the efficiency was just 82% under ultraviolet light radiation for same time radiation. Such efficiency can be maintained higher than 80% when the catalyst is repeatedly used for 4 times. The nano-composite material shows higher photocatalytic activity than pure TiO2 and ZnO, and has preferable photocatalytic stabilization property under sunlight.%通过溶胶-凝胶(Sol-Gel)法制备了ZnTiO-TiO纳米复合光催化剂,利用透射电子显微镜、X射线衍射、紫外-可见吸收光谱和ξ电位等测试技术对其形貌、晶体结构及其光谱响应特性进行了表征.以亚甲基蓝(MB)溶液的脱色降解为模型反应,考察了光源和焙烧温度对该纳米复合材料光催化性能的影响.结果表明,所得纳米复合材料的催化性能与材料的尺寸、在介质中的分散性能、表面荷电性质等有关.600℃下焙烧3 h所得的ZnTiO-Tio纳米复合材料尺寸小(约60 nm)、分散性能好、表面荷负电荷最最高、催化性能最好,且在太阳光下的活性高于紫外光下的.如太阳光下7 h可使亚甲基蓝(MB)溶液的脱色降解率达到93%,

  14. In Vitro Cytotoxicity Assessment of an Orthodontic Composite Containing Titanium-dioxide Nano-particles

    OpenAIRE

    Heravi, Farzin; Ramezani, Mohammad; Poosti, Maryam; Hosseini, Mohsen; Shajiei, Arezoo; Ahrari, Farzaneh

    2013-01-01

    Background and aims. Incorporation of nano-particles to orthodontic bonding systems has been considered to prevent enamel demineralization around appliances. This study investigated cytotoxicity of Transbond XT adhesive containing 1 wt% titanium dioxide (TiO2) nano-particles. Materials and methods. Ten composite disks were prepared from each of the conventional and TiO2-containg composites and aged for 1, 3, 5, 7 and 14 days in Dulbecco’s Modified Eagle’s Medium (DMEM). The extracts were obta...

  15. Heterotopic bone formation by nano-apatite conraining poly (D,L-lactide)composites

    NARCIS (Netherlands)

    Barbieri, D.; Renard, A.J.S.; Bruijn, de J.D.; Yuan, H.

    2010-01-01

    To render polymeric materials osteoinductive, nano-sized calcium phosphate apatite particles (CaP) were introduced into a low molecular weight poly(D,L-lactide). Homogenous composites were made with 10%, 20% and 40% by weight of apatite content while pure polylactide was used as control. Thereafter

  16. Advanced composite materials and processes

    Science.gov (United States)

    Baucom, Robert M.

    1991-01-01

    Composites are generally defined as two or more individual materials, which, when combined into a single material system, results in improved physical and/or mechanical properties. The freedom of choice of the starting components for composites allows the generation of materials that can be specifically tailored to meet a variety of applications. Advanced composites are described as a combination of high strength fibers and high performance polymer matrix materials. These advanced materials are required to permit future aircraft and spacecraft to perform in extended environments. Advanced composite precursor materials, processes for conversion of these materials to structures, and selected applications for composites are reviewed.

  17. Preparation and properties on hollow nano-structured smoke material

    Science.gov (United States)

    Liu, Xiang-cui; Dai, Meng-yan; Fang, Guo-feng; Shi, Wei-dong; Cheng, Xiang; Liu, Hai-feng; Zhang, Tong

    2013-09-01

    In recent years, the weapon systems of laser guidance and infrared (IR) imaging guidance have been widely used in modern warfare because of their high precision and strong anti-interference. Notwithstanding, military smoke, as a rapid and effective passive jamming means, can effectively counteract the attack of enemy precision-guided weapons by scattering and absorbability. Conventional smoke has good attenuation capability only to visible light (0.4-0.76 μm), but hardly any effect to other electromagnetic wave band. The weapon systems of laser guidance and IR imaging guidance usually work in broad band, including near IR (1-3 μm), middle IR (3-5 μm), far IR (8-14 μm), and so on. Accordingly, exploiting and using new efficient obscurant materials, which is one of the important factors that develop smoke technology, have become a focus and attracted more interests around the world. Then nano-structured materials that are developing very quickly have turned into our new choice. Hollow nano-structured materials (HNSM) have many special properties because of their nano-size wall-thickness and sub-micron grain-size. After a lot of HNSM were synthesized in this paper, their physical and chemical properties, including grain size, phase composition, microstructure, optical properties and resistivity were tested and analysed. Then the experimental results of the optical properties showed that HNSM exhibit excellent wave-absorbing ability in ultraviolet, visible and infrared regions. On the basis of the physicochemmical properties, HNSM are firstly applied in smoke technology field. And the obscuration performance of HNSM smoke was tested in smoke chamber. The testing waveband included 1.06μm and 10.6μm laser, 3-5μm and 8-14μm IR radiation. Then the main parameters were obtained, including the attenuation rate, the transmission rate, the mass extinction coefficient, the efficiency obscuring time, and the sedimentation rate, etc. The main parameters of HNSM smoke were

  18. Synthesis of HAP nano rods and processing of nano-size ceramic reinforced poly(L)lactic acid composites

    Science.gov (United States)

    Flanigan, Kyle Yusef

    2000-09-01

    Bone is unique among the various connective tissues in that it is a composite of organic and inorganic components. Calcium phosphates occur principally in the form of hydroxyapatite crystals {Ca10(PO4) 6(OH)2}. Secreted apatite crystals are integral to the structural rigidity of the bone. When a bone breaks, there is often a need to implant an orthotic device to support the broken bone during remodeling. Current technologies use either metal pins and screws that need to be removed (by surgery) once the healing is complete or polymeric materials that either get resorbed or are porous enough to allow bone ingrowth. Poly(L)Lactic acid and copolymers of polyglycolic acid (PGA) are thermoplastics which show promise as the matrix material in biosorbable/load bearing implants. In service this material is hydrolyzed generating water and L-lactate. Orthoses composed of neat PLLA resins require greater than three years for complete resorbtion, however; 95% of strength is lost in 2 to 3 weeks in-vitro. This has limited the deployment of load bearing PLLA to screws, pins or short bracing spans. There exists a need for the development of an implantable and biosorbable orthotic device which will retain its structural integrity long enough for remodeling and healing process to generate new bone material, about 10 weeks. The scope of this dissertation is the development of HAP nano-whisker reinforcement and a HAP/PLLA thermoplastic composite. As proof of the feasibility of generating nano-reinforcement PLLA-composites, the surface of a galleried clay, montmorillonite, was modified and clay/PLLA composites processed and then characterized. Hydroxyapatite nano-whiskers were synthesized and functionalized using organosilanes and Menhaden fish-oil (common organic dispersant). The functionalized nano-fibers were used to process HAP/PLLA composites. Characterization techniques included thermal analysis, magnetic spectroscopy, XRD and ICP analysis and electron microscopy. The

  19. Density functional theory studies on the nano-scaled composites consisted of graphene and acyl hydrazone molecules

    Science.gov (United States)

    Ren, J. L.; Zhou, L.; Lv, Z. C.; Ding, C. H.; Wu, Y. H.; Bai, H. C.

    2016-07-01

    Graphene, which is the first obtained single atomic layer 2D materials, has drawn a great of concern in nano biotechnology due to the unique property. On one hand, acyl hydrazone compounds belonging to the Schif bases have aroused considerable attention in medicine, pharmacy, and analytical reagent. However, few understanding about the interaction between graphene and acyl hydrazone molecules is now available. And such investigations are much crucial for the applications of these new nano-scaled composites. The current work revealed theoretical investigations on the nano-scaled composites built by acyl hydrazone molecules loaded on the surface of graphene. The relative energy, electronic property and the interaction between the counterparts of graphene/acyl hydrazone composites are investigated based on the density functional theory calculations. According to the obtained adsorption energy, the formation of the nano-scaled composite from the isolated graphene and acyl hydrazone molecule is exothermic, and thus it is energetically favorable to form these nano composites in viewpoint of total energy change. The frontier molecular orbital for the nano composite is mainly distributed at the graphene part, leading to that the energy levels of the frontier molecular orbital of the nano composites are very close to that of isolated graphene. Moreover, the counterpart interaction for the graphene/acyl hydrazone composites is also explored based on the discussions of orbital hybridization, charge redistribution and Van der Waals interaction.

  20. Ceramic compositions based on nano forsterite/nano magnesium aluminate spinel powders

    Energy Technology Data Exchange (ETDEWEB)

    Khattab, R.M. [Refractories, Ceramics and Building Materials Dept., National Research Centre, Dokki, 12622 Giza (Egypt); Wahsh, M.M.S., E-mail: mmswahsh@yahoo.com [Refractories, Ceramics and Building Materials Dept., National Research Centre, Dokki, 12622 Giza (Egypt); Khalil, N.M. [Refractories, Ceramics and Building Materials Dept., National Research Centre, Dokki, 12622 Giza (Egypt); Department of Chemistry, Faculty of Sciences and Arts, Khulais, University of Jeddah (Saudi Arabia)

    2015-09-15

    According to the wide applications in the field of chemical and engineering industries, forsterite (Mg{sub 2}SiO{sub 4})/spinel (MgAl{sub 2}O{sub 4}) ceramic compositions were the matter of interest of several research works during the last three decades. This work aims at preparation and characterization of improved ceramic bodies based on forsterite and spinel nano powders through controlling the forsterite and spinel contents in the prepared mixes. These prepared ceramic compositions have been investigated through measuring the densification parameters, cold crushing strength as well as volume resistively. Nano spinel was added from 0 to 30 mass% on expense of nano forsterite matrix and fired at 1550 °C for 2 h. The phase composition of the fired samples was examined using x-ray diffraction (XRD) technique. The microstructure of some selected samples was shown using scanning electron microscope (SEM). A pronounced improvement in the sintering, mechanical properties and volume resistively were achieved with increasing of nano spinel addition up to 15 mass%. This is due to the improvement in the matrix of the prepared forsterite/spinel bodies as a result of well distribution of spinel in the forsterite matrix as depicted by SEM analysis. - Highlights: • Ceramic compositions based on nano forsterite/nano-MgAl{sub 2}O{sub 4} spinel were synthesized. • CCS was improved (333.78 MPa) through 15 mass% of nano-MgAl{sub 2}O{sub 4} spinel addition. • Volume resistivity was enhanced to 203*10{sup 13} Ohm cm with 15 mass% of spinel addition. • Beyond 15 mass% spinel, CCS and volume resistivity were decreased.

  1. Failure Modes in Composite Materials.

    Science.gov (United States)

    1987-05-19

    Derek, An Introduction to Composite Materials , New York: Cambridge University Press, 1981. 12. Jamison, R. D., Mechanical Engineering Department...1978. 19. Tsai, Stephen W., Introduction to Composite Materials , Lancaster, Pennsylvania: Technomic Publishing Company, Inc., 1980. 4,’ * .20. Vernon

  2. Elastomer-Carbon Nanostructure Composites as Prospective Materials for Flexible Robotic Tactile Sensors

    OpenAIRE

    Knite, M; Podiņš, G; Zīke, S; Zavickis, J

    2008-01-01

    Our recent achievements in the design, processing and studies of physical properties of elastomer – nano-structured carbon composites as prospective compressive strain sensor materials for robotic tactile elements are presented. Composites made of polyisoprene matrix and high-structured carbon black or multi-wall carbon nano-tube filler have been designed and manufactured to develop completely flexible conductive polymer nano-composites for tactile sensing elements. Electrical resistance of t...

  3. Investigation of Catalytic Effects and Compositional Variations in Desorption Characteristics of LiNH2-nanoMgH2

    Directory of Open Access Journals (Sweden)

    Sesha S. Srinivasan

    2017-07-01

    Full Text Available LiNH2 and a pre-processed nanoMgH2 with 1:1 and 2:1 molar ratios were mechano-chemically milled in a high-energy planetary ball mill under inert atmosphere, and at room temperature and atmospheric pressure. Based on the thermogravimetric analysis (TGA experiments, 2LiNH2-nanoMgH2 demonstrated superior desorption characteristics when compared to the LiNH2-nanoMgH2. The TGA studies also revealed that doping 2LiNH2-nanoMgH2 base material with 2 wt. % nanoNi catalyst enhances the sorption kinetics at lower temperatures. Additional investigation of different catalysts showed improved reaction kinetics (weight percentage of H2 released per minute of the order TiF3 > nanoNi > nanoTi > nanoCo > nanoFe > multiwall carbon nanotube (MWCNT, and reduction in the on-set decomposition temperatures of the order nanoCo > TiF3 > nanoTi > nanoFe > nanoNi > MWCNT for the base material 2LiNH2-nanoMgH2. Pristine and catalyst-doped 2LiNH2-nanoMgH2 samples were further probed by X-ray diffraction, Fourier transform infrared spectroscopy, transmission and scanning electron microscopies, thermal programmed desorption and pressure-composition-temperature measurements to better understand the improved performance of the catalyst-doped samples, and the results are discussed.

  4. Nano-structured polymer composites and process for preparing same

    Science.gov (United States)

    Hillmyer, Marc; Chen, Liang

    2013-04-16

    A process for preparing a polymer composite that includes reacting (a) a multi-functional monomer and (b) a block copolymer comprising (i) a first block and (ii) a second block that includes a functional group capable of reacting with the multi-functional monomer, to form a crosslinked, nano-structured, bi-continuous composite. The composite includes a continuous matrix phase and a second continuous phase comprising the first block of the block copolymer.

  5. Fabrication and Dielectric Properties of AlN Filled Epoxy Nano-composites

    Energy Technology Data Exchange (ETDEWEB)

    Gao Naiui; Yu Xin; Jin Haiyun; He Bo; Dong Pu [State Key Laboratory of Electrical Insulation and Power Equipment, Xi' an Jiaotong University, Xi' an, 710049 (China); Gao Chao, E-mail: hyjin@mail.xjtu.edu.cn

    2011-10-29

    Epoxy resins were materials with excellent mechanical, electrical properties and good chemical stability. Thus, they had been used in various fields, especially in electrical and electronic application. However, because they were brittle material, the fields of application were limited. Adding nano-Aluminum Nitride (AlN) into Epoxy resins could improve the toughness of the composites, the thermal behaviors of composites could also be improved, but the influence on dielectric properties was not very clear. In this research, epoxy resin based composites were fabricated. The relationships between the dielectric properties and the nano-AlN particle content were investigated. The results showed that, both relative permittivity ({epsilon}{sub r}) and dielectric loss tangent (tan{delta}) decreased to be less than that of monolithic epoxy when nano-AlN particle content was no more than certain amount, the DC volume resistivity ({rho}{sub v}) and low frequency resistivity decreased with increasing nano-AlN content (in certain range of content). AC breakdown strength (E{sub B}) did not have an obvious tendency with nano-AlN content.

  6. Manufacture of Nano Structures in Polymer Material

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Pedersen, H.C.; Staun, Jacob

    2003-01-01

    The incorporation of micro and nano technology into the products of the future is an area of increasing interest. The ideas for new products based on this technology often take their starting point in specific scientific fields whereas the subsequent design and product development not necessarily...... is based on a systematic approach including manufacturing processes and production system capabilities. The process chain associated with micro and nano injection moulding usually comprises silicon or photoresist mastering, electroforming and polymer processing. Additionally, if the produced polymer...

  7. In Vitro Cytotoxicity Assessment of an Orthodontic Composite Containing Titanium-dioxide Nano-particles.

    Science.gov (United States)

    Heravi, Farzin; Ramezani, Mohammad; Poosti, Maryam; Hosseini, Mohsen; Shajiei, Arezoo; Ahrari, Farzaneh

    2013-01-01

    Background and aims. Incorporation of nano-particles to orthodontic bonding systems has been considered to prevent enamel demineralization around appliances. This study investigated cytotoxicity of Transbond XT adhesive containing 1 wt% titanium dioxide (TiO2) nano-particles. Materials and methods. Ten composite disks were prepared from each of the conventional and TiO2-containg composites and aged for 1, 3, 5, 7 and 14 days in Dulbecco's Modified Eagle's Medium (DMEM). The extracts were obtained and exposed to culture media of human gingival fibroblasts (HGF) and mouse L929 fibroblasts. Cell viability was measured using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Results. Both adhesives were moderately toxic for HGF cells on the first day of the experiment, but the TiO2-containing adhesive produced significantly lower toxicity than the pure adhesive (P0.05). There was a significant reduction in cell toxicity with increasing pre-incubation time (Pdental composites. Conclusion. The orthodontic adhesive containing TiO2 nano-particles indicated comparable or even lower toxicity than its nano-particle-free counterpart, indicating that incorporation of 1 wt% TiO2 nano-particles to the composite structure does not result in additional health hazards compared to that occurring with the pure adhesive.

  8. Investigation on Dry Sliding Wear Behavior of Nylon66/GnP Nano-composite

    Science.gov (United States)

    Sankara Narayana, Kota; Suman, Koka Naga Sai; Arun Vikram, Kothapalli

    2017-04-01

    The tribological behavior of graphene nano platelets (GnP) reinforced Nylon66 polymer Nano composites were studied using a pin-on-disc apparatus under dry sliding conditions. The influence of wear control factors like applied load, velocity, sliding distance and weight percentage of GnP reinforcement on the responses like specific wear rate and frictional coefficient were investigated. Nano composites were developed by melt mixing of various weight fractions of GnP (0/0.5/1/2) with nylon 66 using twin screw extruder. A design of experiments based on the Taguchi technique was performed to acquire data in a controlled way and was successfully used to identify the optimal combinations of control factors influencing the outputs. Analysis of variance was employed to investigate the influence and contribution of control factors on the responses. The results showed that the inclusion of GnP as reinforcing material in Nylon66 Nano composites, decreases the friction coefficient and increases the wear resistance of the Nano composites significantly.

  9. Investigation on Dry Sliding Wear Behavior of Nylon66/GnP Nano-composite

    Science.gov (United States)

    Sankara Narayana, Kota; Suman, Koka Naga Sai; Arun Vikram, Kothapalli

    2016-06-01

    The tribological behavior of graphene nano platelets (GnP) reinforced Nylon66 polymer Nano composites were studied using a pin-on-disc apparatus under dry sliding conditions. The influence of wear control factors like applied load, velocity, sliding distance and weight percentage of GnP reinforcement on the responses like specific wear rate and frictional coefficient were investigated. Nano composites were developed by melt mixing of various weight fractions of GnP (0/0.5/1/2) with nylon 66 using twin screw extruder. A design of experiments based on the Taguchi technique was performed to acquire data in a controlled way and was successfully used to identify the optimal combinations of control factors influencing the outputs. Analysis of variance was employed to investigate the influence and contribution of control factors on the responses. The results showed that the inclusion of GnP as reinforcing material in Nylon66 Nano composites, decreases the friction coefficient and increases the wear resistance of the Nano composites significantly.

  10. In Vitro Cytotoxicity Assessment of an Orthodontic Composite Containing Titanium-dioxide Nano-particles

    Directory of Open Access Journals (Sweden)

    Farzin Heravi

    2013-12-01

    Full Text Available Background and aims. Incorporation of nano-particles to orthodontic bonding systems has been considered to prevent enamel demineralization around appliances. This study investigated cytotoxicity of Transbond XT adhesive containing 1 wt% titanium dioxide (TiO2 nano-particles. Materials and methods. Ten composite disks were prepared from each of the conventional and TiO2-containg composites and aged for 1, 3, 5, 7 and 14 days in Dulbecco’s Modified Eagle’s Medium (DMEM. The extracts were obtained and exposed to culture media of human gingival fibroblasts (HGF and mouse L929 fibroblasts. Cell viability was measured using the 3-(4,5-dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide (MTT assay. Results. Both adhesives were moderately toxic for HGF cells on the first day of the experiment, but the TiO2-containing adhesive produced significantly lower toxicity than the pure adhesive (P0.05. There was a significant reduction in cell toxicity with increasing pre-incubation time (P<0.001. L929 cells showed similar toxicity trends, but lower sensitivity to detect cytotoxicity of dental composites. Conclusion. The orthodontic adhesive containing TiO2 nano-particles indicated comparable or even lower toxicity than its nano-particle-free counterpart, indicating that incorporation of 1 wt% TiO2 nano-particles to the composite structure does not result in additional health hazards compared to that occurring with the pure adhesive.

  11. PVC/CPE/nano-CaCO3复合材料的性能研究%Performance study on PVC/CPE/nano-CaCO3 composite material

    Institute of Scientific and Technical Information of China (English)

    王玉龙; 杨琳; 王勇; 陈勤; 丁武绿; 李振中

    2015-01-01

    通过熔融共混法制备了不同配方含量的PVC/CPE/nano-CaCO3复合材料,并对其力学性能、耐热性能和热性能进行了分析,研究了不同碳酸钙含量对复合材料的拉伸强度、冲击强度、维卡软化点温度和热分解温度的影响规律.

  12. 导电基质纳米复合电极材料的研究进展%Research Progress on Nano-composite Electrode Materials Based on Conductive Substrates

    Institute of Scientific and Technical Information of China (English)

    王晓丽; 郑秀娟; 于大伟; 赵新宇

    2016-01-01

    在各种能源储存设备中,锂离子电池成为重要的首选储能器件,在便携电子设备、电动车、混合电动车及其它能源存储设备等方面都有广泛应用。如何提高锂离子电池用电极材料的锂离子储存性能,已经成为材料科学与工程领域的热点之一。利用导电基质构建纳米结构复合材料是提高锂离子储存性能的有效途径。简要介绍了碳基和金属基质纳米复合电极材料的研究进展,主要包括材料制备新方法、新工艺、锂离子电池改性及其发展趋势等内容。%Among all of the available energy storage stations,lithium-ion batteries (LIBs)represent the state-of-art technology in rechargeable energy-storage devices which are highly demanded by the applications such as con-sumer electronics,electric and hybrid electric vehicles.It is a great important issue to improve the lithium-storage per-formance of electrode materials in the field of materials science and engineering.One of effective strategies is to fabri-cate nano structured composite based on the conductive substrate.In this paper,the research progress of carbon and metal conductive substrate materials is briefly introduced,focusing on the new methods and technologies of material preparation,the modification of lithium ion battery and their developing trends.

  13. Facile synthesis of nano cauliflower and nano broccoli like hierarchical superhydrophobic composite coating using PVDF/carbon soot particles via gelation technique.

    Science.gov (United States)

    Sahoo, Bichitra Nanda; Balasubramanian, Kandasubramanian

    2014-12-15

    We have elucidated a cost effective fabrication technique to produce superhydrophobic polyvinylidene fluoride (PVDF/DMF/candle soot particle and PVDF/DMF/camphor soot particle composite) porous materials. The water repellent dry composite was formed by the interaction of non-solvent (methanol) into PVDF/carbon soot particles suspension in N,N-dimethylformamide (DMF). It is seen that longer quenching time effectively changes the surface morphology of dry composites. The nano broccoli like hierarchical microstructure with micro or nano scaled roughen surface was obtained for PVDF/DMF/camphor soot particle, which reveals water contact angle of 172° with roll off angle of 2°. However, composite coating of PVDF/DMF/candle soot particle shows nano cauliflower like hierarchical, which illustrates water contact angle of 169° with roll off angle of 3°. To elucidate the enhancement of water repellent property of PVDF composites, we further divulge the evolution mechanism of nano cauliflower and nano broccoli structure. In order to evaluate the water contact angle of PVDF composites, surface diffusion of water inside the pores is investigated. Furthermore, the addition of small amount of carbon soot particles in composite not only provides the crystallization of PVDF, but also leads to dramatical amendment of surface morphology which increases the surface texture and roughness for superhydrophobicity.

  14. Pilot Study on the Nano-Composites Coats of Radar Wave's Absorption

    Institute of Scientific and Technical Information of China (English)

    HU Chuan-xin; ZhANG Lei; GAN Ai-feng; LI Wan-zhi; LIANG Wen-ting; ZHANG Chen-jia

    2004-01-01

    This thesis mainly introduced the guiding principle and physical model of the research on the nano-composites coats of radar wave's absorption, and then studied the qualitative analysis of the performance ameliorating of radar wave's absorption composite coats. And on the basis of the optimum design of multilayer wave's absorption materials, two new kinds of radar wave's absorption composite coats have been made, which are composed of nano-composites hydroxyl iron powder and hollow micro-sphere. The research indicated that the surface-density of these two new composite coats is less than 3.5 Kg/m2.The coats' thickness is about 1 mm. And the waves absorption capability is above the level of 5 db, in the range of 3 ~ 18GHz. Therefore the wave's absorption performance of these two new coats is better than nano-crystalloid in low frequency area. The pilot study has proved that the nano-composites coat's performance of radar wave's absorption excels the ordinary radar wave's absorption coats, so it needs to be further studied.

  15. Synergy among binary (MWNT, SLG) nano-carbons in polymer nano-composites: a Raman study

    Science.gov (United States)

    Xu, Peng; Loomis, James; King, Ben; Panchapakesan, Balaji

    2012-08-01

    Load transfer and mechanical strength of reinforced polymers are fundamental to developing advanced composites. This paper demonstrates enhanced load transfer and mechanical strength due to synergistic effects in binary mixtures of nano-carbon/polymer composites. Different compositional mixtures (always 1 wt% total) of multi-wall carbon nanotubes (MWNTs) and single-layer graphene (SLG) were mixed in polydimethylsiloxane (PDMS), and effects on load transfer and mechanical strength were studied using Raman spectroscopy. Significant shifts in the G-bands were observed both in tension and compression for single as well as binary nano-carbon counterparts in polymer composites. Small amounts of MWNT0.1 dispersed in SLG0.9/PDMS samples (subscripts represent weight percentage) reversed the sign of the Raman wavenumbers from positive to negative values demonstrating reversal of lattice stress. A wavenumber change from 10 cm-1 in compression to 10 cm-1 in tension, and an increase in elastic modulus of ˜103% was observed for MWNT0.1SLG0.9/PDMS with applied uniaxial tension. Extensive scanning electron microscopy revealed the bridging of MWNT between two graphene plates in polymer composites. Mixing small amounts of MWNTs in SLG/PDMS eliminated the previously reported compressive deformation of SLG and significantly enhanced load transfer and mechanical strength of composites in tension. The orientation order of MWNT with application of uniaxial tensile strain directly affected the shift in Raman wavenumbers (2D-band and G-band) and load transfer. It is observed that the cooperative behavior of binary nano-carbons in polymer composites resulted in enhanced load transfer and mechanical strength. Such binary compositions could be fundamental to developing advanced composites such as nano-carbon based mixed dimensional systems.

  16. Cirrus Dopant Nano-Composite Coatings

    Science.gov (United States)

    2014-11-01

    Inorganic Nano-particles • Ti • Zr • Al • Zn • Yr • Si Coatings • Au • Ag • Sn • Cu • Zn • Ni • NiB • NiCo • NiP cirrus Broadened...1000 1200 HARDNESS (HV) MICROHARDNESS - ELECTROLESS NIP STANDARD COATING TI DOPED COATING ZR DOPED COATING ↑74% Standard DC NiB Cirrus DC NiB 15

  17. Composite materials processing, applications, characterizations

    CERN Document Server

    2017-01-01

    Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.

  18. SeZnSb alloy and its nano tubes, graphene composites properties

    Directory of Open Access Journals (Sweden)

    Abhay Kumar Singh

    2013-04-01

    Full Text Available Composite can alter the individual element physical property, could be useful to define the specific use of the material. Therefore, work demonstrates the synthesis of a new composition Se96-Zn2-Sb2 and its composites with 0.05% multi-walled carbon nano tubes and 0.05% bilayer graphene, in the glassy form. The diffused amorphous structure of the multi walled carbon nano tubes and bilayer gaphene in the Se96-Zn2-Sb2 alloy have been analyzed by using the Raman, X-ray photoluminescence spectroscopy, Furrier transmission infrared spectra, photoluminescence, UV/visible absorption spectroscopic measurements. The diffused prime Raman bands (G and D have been appeared for the multi walled carbon nano tubes and graphene composites, while the X-ray photoluminescence core energy levels peak shifts have been observed for the composite materials. Subsequently the photoluminescence property at room temperature and a drastic enhancement (upto 80% in infrared transmission percentage has been obtained for the bilayer graphene composite, along with optical energy band gaps for these materials have been evaluated 1.37, 1.39 and 1.41 eV.

  19. In-situ nano-crystal-to-crystal transformation synthesis of energetic materials based on three 5,5′-azotetrazolate Cr(III) salts

    Science.gov (United States)

    Miao, Yu; Qiu, Yanxuan; Cai, Jiawei; Wang, Zizhou; Yu, Xinwei; Dong, Wen

    2016-01-01

    The in-situ nano-crystal-to-crystal transformation (SCCT) synthesis provides a powerful approach for tailoring controllable feature shapes and sizes of nano crystals. In this work, three nitrogen-rich energetic nano-crystals based on 5,5′-azotetrazolate(AZT2−) Cr(III) salts were synthesized by means of SCCT methodology. SEM and TEM analyses show that the energetic nano-crystals feature a composition- and structure-dependent together with size-dependent thermal stability. Moreover, nano-scale decomposition products can be obtained above 500 °C, providing a new method for preparing metallic oxide nano materials. PMID:27869221

  20. In-situ nano-crystal-to-crystal transformation synthesis of energetic materials based on three 5,5'-azotetrazolate Cr(III) salts.

    Science.gov (United States)

    Miao, Yu; Qiu, Yanxuan; Cai, Jiawei; Wang, Zizhou; Yu, Xinwei; Dong, Wen

    2016-11-21

    The in-situ nano-crystal-to-crystal transformation (SCCT) synthesis provides a powerful approach for tailoring controllable feature shapes and sizes of nano crystals. In this work, three nitrogen-rich energetic nano-crystals based on 5,5'-azotetrazolate(AZT(2-)) Cr(III) salts were synthesized by means of SCCT methodology. SEM and TEM analyses show that the energetic nano-crystals feature a composition- and structure-dependent together with size-dependent thermal stability. Moreover, nano-scale decomposition products can be obtained above 500 °C, providing a new method for preparing metallic oxide nano materials.

  1. High-Pressure Synthesis of Metal-Ceramic Nano-Composites

    Science.gov (United States)

    Gierlotka, S.; Palosz, B.; Ekimov, E.; Grzanka, E.; Stelmakh, S.; Lojkowski, W.; Bismayer, U.; Palosz, W.; Rose, M. Franklin (Technical Monitor)

    2001-01-01

    The major problems in fabrication of nano-crystal line materials form nano-powders are: (1), coarsening of the initial nano-size grains, (2), insufficient densification (high concentration of pores), and, (3), conversion of diamond into graphite (for diamond-based ceramics). We have developed a novel technique of the synthesis of nano-composite materials applying very high (up to about 10 GPa) pressures. In this technique, one component is pre-compacted and placed next to another having a lower melting point temperature. The whole sample is pressed and the temperature raised above the melting point of the second component, what results in the melt getting pressed into the (nano-size) pores of the compact. Upon subsequent crystallization the melt forms the second nanophase. The process is fast, on the order of seconds, and the temperatures are relatively low what prevents, or at least significantly reduces coarsening of the starting nanophase grains. Also, conversion of diamond into graphite can be prevented. The technique allows for control of the final product properties through a proper selection of (1) the initial compact density and grain size, (2) chemical composition of the source, and (3) the temperature and pressure of the process. The application of the technique to the synthesis of SiC and diamond with Si, Ge, and different metals. Results of the in-situ investigation of the synthesis process by synchrotron X-ray diffraction technique will be presented.

  2. Studies on structural properties of clay magnesium ferrite nano composite

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Manpreet, E-mail: manpreetchem@pau.edu; Singh, Mandeep [Department of Chemistry, Punjab Agricultural University, Ludhiana-141004 (India); Jeet, Kiran, E-mail: kiranjeet@pau.edu; Kaur, Rajdeep [Electron Microscopy and Nanoscience Laboratory, Punjab Agricultural University, Ludhiana-141004 (India)

    2015-08-28

    Magnesium ferrite-bentonite clay composite was prepared by sol-gel combustion method employing citric acid as complexing agent and fuel. The effect of clay on the structural properties was studied with X-ray diffraction (XRD), Fourier transform infrared (FT-IR) Spectroscopy, Scanning electron microscopy (SEM), SEM- Energy dispersive Spectroscope (EDS) and BET surface area analyzer. Decrease in particle size and density was observed on addition of bentonite clay. The BET surface area of nano composite containing just 5 percent clay was 74.86 m{sup 2}/g. Whereas porosity increased from 40.5 per cent for the pure magnesium ferrite to 81.0 percent in the composite showing that nano-composite has potential application as an adsorbent.

  3. Effect of aggressive beverage on the color stability of different nano-hybrid resin based composite

    Directory of Open Access Journals (Sweden)

    Hicham Oday Nuaimi

    2014-01-01

    Full Text Available Background: The purpose of this study was to evaluate the color stability of different types of nano-hybrid resin based composite restorative materials upon exposure to aggressive staining solutions (coffee and tea over time. The color of all specimens before and after storage in the solutions were measured by a spectrophotometer based on CIE Lab system that is recommended by the American Dental Association and the color differences thereby is calculated. Materials and Methods: The color differences of three nano-hybrid composites after immersion for 30 days in tea and coffee as aggressive beverage solutions. Results: Within the limitations of the study, Venus Diamond was found the most color stable in tea, while Ceram X was shown the most color stable in coffee. There were statistically significant differences between Filtek 350 XT in tea and coffee storage (P 0.005. Conclusion: Staining solutions are significant factors that affect color stability of composite resins.

  4. Properties of nanoclay PVA composites materials

    Directory of Open Access Journals (Sweden)

    Mohamed H. M. Ali

    2012-03-01

    Full Text Available Polyvinyl alcohol (PVA/ Na-rich Montmorillonite (MMT nanocomposites were prepared using solution method to create polymer-clay nanocomposite (PCN material. The PCN material was studied using X-ray diffraction (XRD, demonstrating polymer-clay intercalation that has a high d-spacing (lower diffraction angles in the PCN XRD pattern, compared to the pure MMT clay XRD pattern, which has a low d-spacing (high diffraction angles. The nano-scanning electron microscope (NSEM was used to study the morphological image of the PVA, MMT and PCN materials. The results showed that intercalation that took place between the PVA and MMT produced the PCN material. The mechanical properties of the pure PVA and the intercalated polymer material were studied. It was found that the small amount of MMT clay made the tensile modulus and percentage of the total elongation of the nano-composite significantly higher than the pure PVA polymer value, due to polymer-clay intercalation. The thermal stability of the intercalated polymer has been studied using thermal analytical techniques such as thermogravimetric analysis (TGA and differential scanning calorimetry (DSC. The results showed that the PCN material is more thermally stable than the pure PVA polymer.

  5. Comparison of Wear Resistance Between Innovative Composites and Nano- and Microfilled Composite Resins

    Directory of Open Access Journals (Sweden)

    Asefi

    2016-02-01

    Full Text Available Background One of the most common causes of failure in class 2 posterior composite restorations is occlusal and proximal wear. Estelite composites used supra-nano monodispersing spherical fillers and a new photoinitiator, and the manufacturer claimed that the wear of these composites is less than 1 mm3 volumetric wear. Objectives Compare the wear resistance of new Estelite composites with that of other composites generations. Materials and Methods Thirty-five specimens were evaluated in five groups: three kinds of Estelite composites (Estelite Sigma Quick, Estelite Flow Quick, and Estelite Flow Quick High Flow, Filtek Z350, and Filtek Z250. All specimens were prepared in 25 mm disks and cured with laboratory light for 120 seconds (60 s for each side. Then, they were polished by 600 grit sand paper and stored for one week in distilled water at room temperature. We used a two-body abrasion test and the pin-on-disk method with distilled water as medium. All specimens were worn under 15 N load, 0.05 m/seconds speed, 100 m distance, and steatite ceramic balls antagonists. After wearing, we measured wear volume by calculating the wear track cross-section area with a profilometer and analyzed the data with the one-way analysis of variance (ANOVA test. Results The wear amounts of the composites are as follows in order: Estelite sigma quick (1886.9 ± 518.5 μm2, Estelite flow quick (2708.9 ± 578.1 μm2, Estelite high flow (3206 ± 2445.1 μm2, Filtek Z350 (3840 ± 1963.4 μm2, and Filtek Z250 (4667.2 ± 2351.1 μm2. No statistical difference was found among the groups (P value > 0.05. Conclusions Estelite sigma quick composite had wear resistance similar to that of nano- and microfilled composites. Estelite flowable composites demonstrated similar wear resistance to that of a posterior composite.

  6. Structure-property relationships of multiferroic materials: A nano perspective

    Science.gov (United States)

    Bai, Feiming

    The integration of sensors, actuators, and control systems is an ongoing process in a wide range of applications covering automotive, medical, military, and consumer electronic markets. Four major families of ceramic and metallic actuators are under development: piezoelectrics, electrostrictors, magnetostrictors, and shape-memory alloys. All of these materials undergo at least two phase transformations with coupled thermodynamic order parameters. These transformations lead to complex domain wall behaviors, which are driven by electric fields (ferroelectrics), magnetic fields (ferromagnetics), or mechanical stress (ferroelastics) as they transform from nonferroic to ferroic states, contributing to the sensing and actuating capabilities. This research focuses on two multiferroic crystals, Pb(Mg1/3Nb 2/3)O3-PbTiO3 and Fe-Ga, which are characterized by the co-existence and coupling of ferroelectric polarization and ferroelastic strain, or ferro-magnetization and ferroelastic strain. These materials break the conventional boundary between piezoelectric and electrostrictors, or magnetostrictors and shape-memory alloys. Upon applying field or in a poled condition, they yield not only a large strain but also a large strain over field ratio, which is desired and much benefits for advanced actuator and sensor applications. In this thesis, particular attention has been given to understand the structure-property relationships of these two types of materials from atomic to the nano/macro scale. X-ray and neutron diffraction were used to obtain the lattice structure and phase transformation characteristics. Piezoresponse and magnetic force microscopy were performed to establish the dependence of domain configurations on composition, thermal history and applied fields. It has been found that polar nano regions (PNRs) make significant contributions to the enhanced electromechanical properties of PMN-x%PT crystals via assisting intermediate phase transformation. With increasing PT

  7. Composite materials design and applications

    CERN Document Server

    Gay, Daniel; Tsai, Stephen W

    2002-01-01

    PART ONE. PRINCIPLES OF CONSTRUCTIONCOMPOSITE MATERIALS, INTEREST AND PROPERTIESWhat is Composite Material Fibers and MatrixWhat can be Made Using Composite Materials?Typical Examples of Interest on the Use of Composite MaterialsExamples on Replacing Conventional Solutions with CompositesPrincipal Physical PropertiesFABRICATION PROCESSESMolding ProcessesOther Forming ProcessesPractical Hints in the Manufacturing ProcessesPLY PROPERTIESIsotropy and AnisotropyCharacteristics of the Reinforcement-Matrix MixtureUnidirectional PlyWoven FabricsMats and Reinforced MatricesMultidimensional FabricsMetal Matrix CompositesTestsSANDWICH STRUCTURES:What is a Sandwich Structure?Simplified FlexureA Few Special AspectsFabrication and Design ProblemsNondestructive Quality ControlCONCEPTION AND DESIGNDesign of a Composite PieceThe LaminateFailure of LaminatesSizing of LaminatesJOINING AND ASSEMBLYRiveting and BoltingBondingInsertsCOMPOSITE MATERIALS AND AEROSPACE CONSTRUCTIONAircraftHelicoptersPropeller Blades for AirplanesTur...

  8. Fiber-Reinforced Reactive Nano-Epoxy Composites

    Science.gov (United States)

    Zhong, Wei-Hong

    2011-01-01

    An ultra-high-molecular-weight polyethylene/ matrix interface based on the fabrication of a reactive nano-epoxy matrix with lower surface energy has been improved. Enhanced mechanical properties versus pure epoxy on a three-point bend test include: strength (25 percent), modulus (20 percent), and toughness (30 percent). Increased thermal properties include higher Tg (glass transition temperature) and stable CTE (coefficient of thermal expansion). Improved processability for manufacturing composites includes faster wetting rates on macro-fiber surfaces, lower viscosity, better resin infusion rates, and improved rheological properties. Improved interfacial adhesion properties with Spectra fibers by pullout tests include initial debonding force of 35 percent, a maximum pullout force of 25 percent, and energy to debond at 65 percent. Improved mechanical properties of Spectra fiber composites (tensile) aging resistance properties include hygrothermal effects. With this innovation, high-performance composites have been created, including carbon fibers/nano-epoxy, glass fibers/nano-epoxy, aramid fibers/ nano-epoxy, and ultra-high-molecularweight polyethylene fiber (UHMWPE).

  9. Graphene nano-devices and nano-composites for structural, thermal and sensing applications

    Science.gov (United States)

    Yavari, Fazel

    In this dissertation we have developed graphene-based nano-devices for applications in integrated circuits and gas sensors; as well as graphene-based nano-composites for applications in structures and thermal management. First, we have studied the bandgap of graphene for semiconductor applications. Graphene as a zero-bandgap material cannot be used in the semiconductor industry unless an effective method is developed to open the bandgap in this material. We have demonstrated that a bandgap of 0.206 eV can be opened in graphene by adsorption of water vapor molecules on its surface. Water molecules break the molecular symmetries of graphene resulting in a significant bandgap opening. We also illustrate that the lack of bandgap in graphene can be used to our advantage by making sensors that are able to detect low concentrations of gas molecules mixed in air. We have shown that 1-2 layers of graphene synthesized by chemical vapor deposition enables detection of trace amounts of NO 2 and NH3 in air at room temperature and atmospheric pressure. The gas species are detected by monitoring changes in electrical resistance of the graphene film due to gas adsorption. The sensor response time is inversely proportional to the gas concentration. Heating the film expels chemisorbed molecules from the graphene surface enabling reversible operation. The detection limits of ~100 parts-per-billion (ppb) for NO2 and ~500 ppb for NH3 obtained using this device are markedly superior to commercially available NO2 and NH3 detectors. This sensor is fabricated using individual graphene sheets that are exquisitely sensitive to the chemical environment. However, the fabrication and operation of devices that use individual nanostructures for sensing is complex, expensive and suffers from poor reliability due to contamination and large variability from sample-to-sample. To overcome these problems we have developed a gas sensor based on a porous 3D network of graphene sheets called graphene foam

  10. Novel hydrophobic associated polymer based nano-silica composite with core–shell structure for intelligent drilling fluid under ultra-high temperature and ultra-high pressure

    Directory of Open Access Journals (Sweden)

    Hui Mao

    2015-02-01

    Full Text Available Micro-nano-based drilling fluid has attracted a strong interest due to its attractive properties, and micro-nano composite materials have great potential for developing intelligent drilling fluid. In this study a novel hydrophobic associated polymer based nano-silica composite with core–shell structure was prepared and characterized by PSD, SEM, TEM and ESEM. The results showed that the composite, as a micro-nano drilling fluid additive, possessed excellent properties such as thermal stability, rheology, fluid loss and lubricity. Especially, it could plug the formation effectively and improve the pressure bearing capability of formation significantly.

  11. Reactivity improvement of magnesium by carbon nano-material mixing

    Energy Technology Data Exchange (ETDEWEB)

    Aikawa, Kenji [Tokai Univ. (Japan). Course of Metallurgical Engineering; Niimuma, Hideki; Uchida, Haru-Hisa [Tokai Univ. (Japan). Dept. of Human Development; Nishi, Yoshitake [Tokai Univ. (Japan). Dept. of Materials Science

    2010-07-01

    Proposing magnesium as a hydrogen storage material, we demonstrate quite interesting results of carbon nano-materials mixed into magnesium by mechanical milling in this study. Higher hydrogen reactivity can be obtained by multi wall carbon nano-tube (MWCNT) mixing which may enlarge the diffusion path in the sample powder particles. As a result, Mg with 0, 10, 20, 40 and 60 mass% of MWCNT exhibits drastically modified hydrogen absorption and desorption kinetics with more than 5 mass% H (including weight of catalyst) at 573-673K within 10min. under 6MPa of H{sub 2}. (orig.)

  12. Carbon Cryogel Silicon Composite Anode Materials for Lithium Ion Batteries

    Science.gov (United States)

    Woodworth James; Baldwin, Richard; Bennett, William

    2010-01-01

    A variety of materials are under investigation for use as anode materials in lithium-ion batteries, of which, the most promising are those containing silicon. 10 One such material is a composite formed via the dispersion of silicon in a resorcinol-formaldehyde (RF) gel followed by pyrolysis. Two silicon-carbon composite materials, carbon microspheres and nanofoams produced from nano-phase silicon impregnated RF gel precursors have been synthesized and investigated. Carbon microspheres are produced by forming the silicon-containing RF gel into microspheres whereas carbon nano-foams are produced by impregnating carbon fiber paper with the silicon containing RF gel to create a free standing electrode. 1-4,9 Both materials have demonstrated their ability to function as anodes and utilize the silicon present in the material. Stable reversible capacities above 400 mAh/g for the bulk material and above 1000 mAh/g of Si have been observed.

  13. Structure characterization and analysis of Chinese fir/Nano-ZnO composite materials%杉木-纳米ZnO复合材料结构表征与分析

    Institute of Scientific and Technical Information of China (English)

    袁光明; 宫飞飞; 刘天柱; 张南南

    2011-01-01

    The shape and situation of nano-ZnO particles is characterized by laser-sizing instrument, SEM and TEM etc; and the structure of the Chinese fir/nano-ZnO composite is characterized and analyzed along with XRD and EDXA (XPS spectrum) , FTIR and/or other spectroscopy etc. The results show that nano-ZnO particles locate on the cell-walls of the wood and the edges of pits, and can be easily combined firmly with hydroxide radicel, diacetyl and carbox-yl etc in the wood, by the un-saturation groups on the surface of nano-ZnO particles. Some other nano-ZnO particles are located at the nano-space inside the wood, such as located between micro-fibrils. The interfaces disappear for the wholly or partly so as to improve the properties of the the Chinese fir/nano-ZnO composite.%通过激光粒度仪、SEM、TEM表征纳米ZnO粒子形貌,并结合XRD、能量弥散X射线谱(EDXA)和傅立叶变换红外光谱等分析杉木-纳米ZnO复合材料的结构。结果表明:纳米ZnO粒子呈絮状分布于杉木木材细胞壁、纹孔口边缘等处;能与木材组分大分子链上的羟基、乙酰基及羧基等活性基团形成结合;另有部分以物理方式充填于木材的纳米空间,如其微纤丝非结晶区等处;纳米ZnO粒子与木材组分两相间界面完全或部分消失,可使该复合材料性能显著提高。

  14. Erosion-resistant composite material

    Science.gov (United States)

    Finch, C.B.; Tennery, V.J.; Curlee, R.M.

    A highly erosion-resistant composite material is formed of chemical vapor-deposited titanium diboride on a sintered titanium diboride-nickel substrate. This material may be suitable for use in cutting tools, coal liquefaction systems, etc.

  15. STRUCTURE AND DYNAMICS OF POLYMERIC MATERIALS IN NANO-SCALE

    Institute of Scientific and Technical Information of China (English)

    Toshio Nishi; So Fujinami; Dong Wang; Hao Liu; Ken Nakajima

    2011-01-01

    The nano-palpation technique, i.e., nanometer-scale elastic and viscoelastic measurements based on atomic force microscope, is introduced. It is demonstrated to be very useful in analyzing nanometer-scale materials properties for the surfaces and interfaces of various types of soft materials. It enables us to obtain not only structural information but also mechanical information about a material at the same place and at the same time.

  16. Self-sensing and thermal energy experimental characterization of multifunctional cement-matrix composites with carbon nano-inclusions

    Science.gov (United States)

    D'Alessandro, A.; Pisello, A. L.; Sambuco, Sara; Ubertini, F.; Asdrubali, F.; Materazzi, A. L.; Cotana, F.

    2016-04-01

    The recent progress of Nanotechnology allowed the development of new smart materials in several fields of engineering. In particular, innovative construction materials with multifunctional enhanced properties can be produced. The paper presents an experimental characterization on cement-matrix pastes doped with Carbon Nanotubes, Carbon Nano-fibers, Carbon Black and Graphene Nano-platelets. Both electro-mechanical and thermo-physical investigations have been carried out. The conductive nano-inclusions provide the cementitious matrix with piezo-resistive properties allowing the detection of external strain and stress changes. Thereby, traditional building materials, such as concrete and cementitious materials in general, would be capable of self-monitoring the state of deformation they are subject to, giving rise to diffuse sensing systems of structural integrity. Besides supplying self-sensing abilities, carbon nano-fillers may change mechanical, physical and thermal properties of cementitious composites. The experimental tests of the research have been mainly concentrated on the thermal conductivity and the optical properties of the different nano-modified materials, in order to make a critical comparison between them. The aim of the work is the characterization of an innovative multifunctional composite capable of combining self-monitoring properties with proper mechanical and thermal-energy efficiency characteristics. The potential applications of these nano-modified materials cover a wide range of possibilities, such as structural elements, floors, geothermal piles, radiant systems and more.

  17. Two-year clinical comparison of a flowable-type nano-hybrid composite and a paste-type composite in posterior restoration.

    Science.gov (United States)

    Hirata-Tsuchiya, Shizu; Yoshii, Shinji; Ichimaru-Suematsu, Miki; Washio, Ayako; Saito, Noriko; Urata, Mariko; Hanada, Kaori; Morotomi, Takahiko; Kitamura, Chiaki

    2017-08-01

    The purpose of the present study was to compare the clinical efficacy between a flowable-type nano-hybrid composite and a paste-type composite for posterior restoration. Of 62 posterior teeth in 33 patients (mean age: 34.1 years), 31 were filled with a paste-type composite (Heliomolar [HM] group), and another 31 with a flowable nano-hybrid composite (MI FIL [MI] group). Clinical efficacy was evaluated at 2 years after the restoration. There were no differences for retention, surface texture deterioration, anatomical form change, deterioration of marginal adaptation, and secondary caries, while a statistical difference was found for marginal discoloration, which was significantly greater in the HM group (P composites showed that the flowable nano-hybrid composite could be an effective esthetic material for posterior restoration. © 2016 John Wiley & Sons Australia, Ltd.

  18. Thermal, mechanical and electrical properties of polyanaline based ceramic nano-composites

    Science.gov (United States)

    Sohail, M.; Khan, M. S.; Khattak, N. S.

    2016-08-01

    Micro/nanohybrid materials have vast applications due to their great potentialities in the field of nanoscience and nanotechnology. Herein we report an investigation on the fabrication and physicochemical characterization of ceramic (Fe0.01La0.01Al0.5Zn0.98O) and hybrid ceramic-polyaniline nano-composits. Ceramic nano-particles were prepared by sol-gel technique while optimizing the molar ratios of the constituent's metal nitrates. The prepared inorganic particles were then embedded in the polymer matrix via one-pot blending method. The prepared ceramic particles and their composites with polyaniline were analysed under FT- IR, SEM and TGA. The presence of some chemical species was observed at the interface of the compositing materials. TGA analysis showed the thermal stability of the composite material. Frequency dependent dielectric properties were analysed and it was found that conducting polyaniline has an additional effect on the electrical behaviour of the composite. Rheology study showed enhanced mechanical properties of composite material as compared to their constituting counterparts.

  19. Controlling the Morphology of Nano-Hybrid Materials

    Directory of Open Access Journals (Sweden)

    Abdullah I.A. Jaafari

    2010-01-01

    Full Text Available Problem statement: It is known that layer double hydroxide is one of the nano ordered layered compounds and possesses plate-like morphology if carefully crystallized. Approach: In this study, Co-Sn LDH consisting of divalent and tetravalent cations was prepared with new morphology. XRD patterns of the prepared Co-Sn LDH showed that the interlayer spacing of the LDH was 0.78 nm and SEM image showed nano-needles structure. Results: By intercalation reaction with monocarboxylic acids at room temperature, XRD patterns indicated that the interlayered spacing increased to 3-4.8 nm and formed organic-inorganic nano-hybrid materials. Also, SEM images showed that the nano-needles structure of Co-Sn LDH changes to plate like-structure. Conclusion: Thermal analyses (TG, DTG and DTA and Infrared spectrum confirmed the intercalation processes of n-capric acid and n-stearic acid inside Co-Sn LDH and the formation of nano-hybrid materials.

  20. Synthesis and Characterization of Nano Ag/Liquid Crystals Composite Material via In-situ Method%纳米银/液晶复合材料原位合成及表征

    Institute of Scientific and Technical Information of China (English)

    武艳玲; 陈沛; 陈新兵; 安忠维

    2013-01-01

    To solve the problem of nanoparticles' aggregation,the nano Ag/liquid crystals hybrid composite was prepared via in-situ synthesis method by thermo-decomposing Ag2C2O4 in thermotropic liquid crystals.The obtained composite of nano Ag/liquid crystals was characterized by means of X-ray diffraction (XRD),transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS).The results show that the particle size of Ag was less than 20 nm,and the nano-Ag was monodispersed in liquid crystal,and no aggregation was observed.%针对纳米粒子易团聚的问题,采用原位合成法,以草酸银(Ag2C2O4)为原料,在热致液晶中原位热分解,制备出了纳米银/液晶复合材料.经X射线衍射仪(XRD)、透射电镜(TEM)、X光电子能谱仪(XPS)等表征,制得的纳米银粒径小于20 nm,在液晶中均匀分散,没有团聚现象.

  1. Structure and Properties of poly (para phynelyne benzobisoxazole) (PBO) /single wall carbon nano tube composite fibers

    Science.gov (United States)

    Kumar, Satish; Zhang, Xiefei; Bhattacharyya, Arup R.; Min, Byung G.; Dang, T. D.; Arnold, F. E.; Vaia, Richard A.; Ramesh, S.; Willis, P. A.; Hauge, R. H.; Smalley, R. E.

    2002-03-01

    The liquid crystalline compositions are prepared by the in-situ polycondensation of diamines and diacid monomers in the presence of single wall carbon nano tubes (SWNT). Processing of the new compositions into fibers provide hybrid materials with improved mechanical properties. The in-situ polymerizations were carried out in polyphosphoric acid (PPA). Carbon nano tubes as high as 10 wt.polymer weight have been utilized. Fiber spinning has been carried out using dry jet wet spinning using a piston driven spinning system and the fiber coagulated in water and subsequently vacuum dried and heat treated in nitrogen at 400oC. Structure and properties of these fibers have been studied. Tensile strength of the composite fibers increased by about 50morphology of these fibers have been studied using X- ray diffraction and scanning electron microscopy.

  2. Composite Materials for Structural Design.

    Science.gov (United States)

    1982-03-01

    Introduction to Composite Materials , Technomic, Westport, Connecticut, 1980, pp. 19-20, 388-401. 8. W.D. Bascom, J.L. Bitner, R.J. Moulton, and A.R. Siebert...34 Introduction to Composite Materials ", Technomic Publishing Co., pp. 8-18,(1980). [6] Beckwith, S. W., "Viscoelastic Characterization of a Nonlinear Glass

  3. Composite Materials in Overhead Lines

    DEFF Research Database (Denmark)

    Sørensen, Thomas Kjærsgaard; Holbøll, Joachim

    2009-01-01

    The use of composite materials, e.g. fibreglass materials, in overhead transmission line systems is nothing new. Composite based insulators have been applied to transmission lines for over 30 years, mainly as suspension and post insulators and often as an option for special applications. Also...... towers and recently conductors based on composite materials are available at transmission levels. In this paper it is investigated which composite based solutions are available in connection with complete overhead line systems including insulators, towers and conductors. The components are reviewed...... with respect to solved and persisting known failures/problems of both mechanical and electrical nature. Major challenges related to extensive use of composite materials in an overhead line system are identified, as are possible benefits - both when using standard as well as customised composite components, e...

  4. Final Report - Recovery Act - Development and application of processing and process control for nano-composite materials for lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, Claus [ORNL; Armstrong, Beth L [ORNL; Maxey, L Curt [ORNL; Sabau, Adrian S [ORNL; Wang, Hsin [ORNL; Hagans, Patrick [A123 Systems, Inc.; Babinec, Sue [A123 Systems, Inc.

    2013-08-01

    Oak Ridge National Laboratory and A123 Systems, Inc. collaborated on this project to develop a better understanding, quality control procedures, and safety testing for A123 System s nanocomposite separator (NCS) technology which is a cell based patented technology and separator. NCS demonstrated excellent performance. x3450 prismatic cells were shown to survive >8000 cycles (1C/2C rate) at room temperature with greater than 80% capacity retention with only NCS present as an alternative to conventional polyolefin. However, for a successful commercialization, the coating conditions required to provide consistent and reliable product had not been optimized and QC techniques for being able to remove defective material before incorporation into a cell had not been developed. The work outlined in this report addresses these latter two points. First, experiments were conducted to understand temperature profiles during the different drying stages of the NCS coating when applied to both anode and cathode. One of the more interesting discoveries of this study was the observation of the large temperature decrease experienced by the wet coating between the end of the infrared (IR) drying stage and the beginning of the exposure to the convection drying oven. This is not a desirable situation as the temperature gradient could have a deleterious effect on coating quality. Based on this and other experimental data a radiative transfer model was developed for IR heating that also included a mass transfer module for drying. This will prove invaluable for battery coating optimization especially where IR drying is being employed. A stress model was also developed that predicts that under certain drying conditions tensile stresses are formed in the coating which could lead to cracking that is sometimes observed after drying is complete. Prediction of under what conditions these stresses form is vital to improving coating quality. In addition to understanding the drying process other

  5. CRADA Final Report for NFE-08-01826: Development and application of processing and processcontrol for nano-composite materials for lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, C.; Armstrong, B.; Maxey, C.; Sabau, A.; Wang, H.; Hagans, P. (A123 Systems, Inc.); and Babinec, S. (A123 Systems, Inc.)

    2012-12-15

    Oak Ridge National Laboratory and A123 Systems, Inc. collaborated on this project to develop a better understanding, quality control procedures, and safety testing for A123 System’s nanocomposite separator (NCS) technology which is a cell based patented technology and separator. NCS demonstrated excellent performance. x3450 prismatic cells were shown to survive >8000 cycles (1C/2C rate) at room temperature with greater than 80% capacity retention with only NCS present as an alternative to conventional polyolefin. However, for a successful commercialization, the coating conditions required to provide consistent and reliable product had not been optimized and QC techniques for being able to remove defective material before incorporation into a cell had not been developed. The work outlined in this report addresses these latter two points. First, experiments were conducted to understand temperature profiles during the different drying stages of the NCS coating when applied to both anode and cathode. One of the more interesting discoveries of this study was the observation of the large temperature decrease experienced by the wet coating between the end of the infrared (IR) drying stage and the beginning of the exposure to the convection drying oven. This is not a desirable situation as the temperature gradient could have a deleterious effect on coating quality. Based on this and other experimental data a radiative transfer model was developed for IR heating that also included a mass transfer module for drying. This will prove invaluable for battery coating optimization especially where IR drying is being employed. A stress model was also developed that predicts that under certain drying conditions tensile stresses are formed in the coating which could lead to cracking that is sometimes observed after drying is complete. Prediction of under what conditions these stresses form is vital to improving coating quality. In addition to understanding the drying process other

  6. Epoxy Nano-Reinforced Composite Systems

    Science.gov (United States)

    2008-02-01

    phase, in addition to the bulk matrix and nanofiller phases. The suppression of Tg in nanofilled composites has been observed by other reseachers (13...drawback. As this technology advances, the nanofiller market should see large growth and cost reduction as these additives are successfully applied

  7. Superconducting composites materials. Materiaux composites supraconducteurs

    Energy Technology Data Exchange (ETDEWEB)

    Kerjouan, P.; Boterel, F.; Lostec, J.; Bertot, J.P.; Haussonne, J.M. (Centre National d' Etudes des Telecommunications (CNET), 22 - Lannion (FR))

    1991-11-01

    The new superconductor materials with a high critical current own a large importance as well in the electronic components or in the electrotechnical devices fields. The deposit of such materials with the thick films technology is to be more and more developed in the years to come. Therefore, we tried to realize such thick films screen printed on alumina, and composed mainly of the YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} material. We first realized a composite material glass/YBa{sub 2}Cu{sub 3}O{sub 7-{delta}}, by analogy with the classical screen-printed inks where the glass ensures the bonding with the substrate. We thus realized different materials by using some different classes of glass. These materials owned a superconducting transition close to the one of the pure YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} material. We made a slurry with the most significant composite materials and binders, and screen-printed them on an alumina substrate preliminary or not coated with a diffusion barrier layer. After firing, we studied the thick films adhesion, the alumina/glass/composite material interfaces, and their superconducting properties. 8 refs.; 14 figs.; 9 tabs.

  8. Synthesis and characterization of nano silver ferrite composite

    Science.gov (United States)

    Murthy, Y. L. N.; Kondala Rao, T.; Kasi viswanath, I. V.; Singh, Rajendra

    2010-07-01

    We report the synthesis of nano sized silver ferrite composite having the empirical formula AgFeO 2 by a co-precipitation method. The resulting powders are thin platelets, transparent and a rich ruby red in color in transmission. The X-ray diffraction (XRD) powder data consisted of only nine reflections, and the analysis showed the unit cell to be rhombohedral. The powders showed extensive XRD line broadening and the sizes of the crystals are calculated to be in the range 4-36.5 nm. The morphology of the silver ferrite composite studied using scanning electron microscope showed nano sized particles. The particle size is found to increase with increase in annealing temperature. The magnetic behavior, measured using a vibrating sample magnetometer, indicated a change from paramagnetic to ferromagnetic with increase in particle size.

  9. Novel Nanosized Adsorbing Composite Cathode Materials for the Next Generational Lithium Battery

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yong; ZHENG Wei; ZHANG Ping; WANG Lizhen; XIA Tongchi; HU Xinguo; YU Zhenxing

    2007-01-01

    A novel carbon-sulfur nano-composite material was synthesized by heating sublimed sulfur and high surface area activated carbon (HSAAC) under certain conditions. The physical and chemical performances of the novel carbon-sulfur nano-composite were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) and X-ray diffraction (XRD). The electrochemical performances of nano-composite were characterized by charge-discharge characteristic, cyclic voltammetry and electrochemical impendence spectroscopy (EIS). The experimental results indicate that the electrochemical capability of nanocomposite material was superior to that of traditional S-containing composite material. The cathode made by carbon-sulfur nano-composite material shows a good cycle ability and a high specific charge-discharge capacity. The HSAAC shows a vital role in adsorbing sublimed sulfur and the polysulfides within the cathode and is an excellent electric conductor for a sulfur cathode and prevents the shuttle behavior of the lithium-sulfur battery.

  10. Preparation and characterization of amino functionalized nano-composite material and its application for multi-residue analysis of pesticides in cabbage by gas chromatography-triple quadrupole mass spectrometry.

    Science.gov (United States)

    Zhao, Yong-Gang; Shen, Hao-Yu; Shi, Jia-Wei; Chen, Xiao-Hong; Jin, Mi-Cong

    2011-08-19

    In this paper, a novel and recyclable amino-functionalized nano-composite material (NCM) using tetraethylenepentamine (TEPA) as a coupling agent was synthesized. The properties of the TEPA-NCM were characterized by transmission electron microscopy (TEM), Fourier transform infrared analysis (FTIR), thermogravimetric analysis (TGA) and elemental analysis (EA). An effective dispersive solid-phase extraction (dSPE) procedure using the TEPA-NCM was developed, and comparative studies were carried out among Carbon/NH₂ SPE, primary secondary amine (PSA) dSPE and TEPA-NCM dSPE. The results showed that TEPA-NCM dSPE was faster, easier and more effective to clean and enrich than the Carbon/NH₂ cartridges, and the TEPA-NCM was much more effective to remove the pigments in vegetable samples than the PSA materials. The TEPA-NCM could be reused at least five times without much sacrifice of the cleanup efficiency. Furthermore, a gas chromatography-triple quadrupole mass spectrometry (GC-QqQ-MS/MS) method was established for the simultaneous determination of 29 pesticides (such as organochlorine and organophosphorus pesticides) in vegetables by dSPE using acetonitrile as an extraction solvent and TEPA-NCM as an adsorbent instead of PSA. The recoveries were in the range of 75-114% for all analytes except for trans-chlordane. The RSDs were in the range of 2-17%. The linearities were in the range of 0.4-100.0 μg/kg with determination coefficients (r²) higher than 0.986 for all compounds. The limits of detection (LODs) for all pesticides were less than 0.29 μg/kg and the limits of quantification (LOQs) were between 0.17 and 0.95 μg/kg. The developed method was applied to fifteen real vegetable samples, and it was confirmed that the TEPA-NCM was one of a kind of highly effective dSPE materials used for the pesticides analyses.

  11. Strain-Detecting Composite Materials

    Science.gov (United States)

    Wallace, Terryl A. (Inventor); Smith, Stephen W. (Inventor); Piascik, Robert S. (Inventor); Horne, Michael R. (Inventor); Messick, Peter L. (Inventor); Alexa, Joel A. (Inventor); Glaessgen, Edward H. (Inventor); Hailer, Benjamin T. (Inventor)

    2016-01-01

    A composite material includes a structural material and a shape-memory alloy embedded in the structural material. The shape-memory alloy changes crystallographic phase from austenite to martensite in response to a predefined critical macroscopic average strain of the composite material. In a second embodiment, the composite material includes a plurality of particles of a ferromagnetic shape-memory alloy embedded in the structural material. The ferromagnetic shape-memory alloy changes crystallographic phase from austenite to martensite and changes magnetic phase in response to the predefined critical macroscopic average strain of the composite material. A method of forming a composite material for sensing the predefined critical macroscopic average strain includes providing the shape-memory alloy having an austenite crystallographic phase, changing a size and shape of the shape-memory alloy to thereby form a plurality of particles, and combining the structural material and the particles at a temperature of from about 100-700.degree. C. to form the composite material.

  12. Progress in Tribological Properties of Nano-Composite Hard Coatings under Water Lubrication

    Directory of Open Access Journals (Sweden)

    Qianzhi Wang

    2017-02-01

    Full Text Available The tribological properties, under water-lubricated conditions, of three major nano-composite coatings, i.e., diamond-like carbon (DLC or a-C, amorphous carbon nitride (a-CNx and transition metallic nitride-based (TiN-based, CrN-based, coatings are reviewed. The influences of microstructure (composition and architecture and test conditions (counterparts and friction parameters on their friction and wear behavior under water lubrication are systematically elucidated. In general, DLC and a-CNx coatings exhibit superior tribological performance under water lubrication due to the formation of the hydrophilic group and the lubricating layer with low shear strength, respectively. In contrast, TiN-based and CrN-based coatings present relatively poor tribological performance in pure water, but are expected to present promising applications in sea water because of their good corrosion resistance. No matter what kind of coatings, an appropriate selection of counterpart materials would make their water-lubricated tribological properties more prominent. Currently, Si-based materials are deemed as beneficial counterparts under water lubrication due to the formation of silica gel originating from the hydration of Si. In the meantime, the tribological properties of nano-composite coatings in water could be enhanced at appropriate normal load and sliding velocity due to mixed or hydrodynamic lubrication. At the end of this article, the main research that is now being developed concerning the development of nano-composite coatings under water lubrication is described synthetically.

  13. Preparation and corrosion behavior evaluation of amalgam/titania nano composite

    Directory of Open Access Journals (Sweden)

    Neda Bahremandi Tolou

    2011-01-01

    Conclusion: By adding nano particles of titania and preparing amalgam/titania nano composite as a dental amalgam, corrosion behavior and mercury release during the 2 st h after preparation could be improved.

  14. Investigation of Mechanical Behavior of Alfa and Gamma Nano- Alumina/ Epoxy Composite Made By Vartm

    Directory of Open Access Journals (Sweden)

    P. Ghabezi

    2016-06-01

    Full Text Available In this paper, the mechanical properties (flexural and tensional modulus and strength are investigated by manufacturing Epoxy/Glass Nano-composite samples with different Nano-particle wt% (Nano-Alumina to find optimum conditions. The alpha and Gamma grade of Nano alumina were added to the epoxy system with the weight percentage of 1, 2, 3, 4, 5 and 6. The experimental results show that the maximum flexural stiffness in Alfa and Gamma Nano-alumina composite is related to 6 wt% and 4 wt% samples, respectively. And the highest tensional stiffness in Alfa and Gamma Nano-alumina composite is related to 4 wt% and 5 wt% samples, respectively. Also the highest toughness for Alfa and Gamma Nano-composites is observed for 4 wt% and 3 wt% samples and in the same way Nano-alumina in grade Alfa with 1 wt% and Gamma with 3 wt% have highest failure strain.

  15. Preparation of Free-passivating Painting Nano-materials Composite Powder Coating%可免钝化涂装的纳米材料复合粉末涂料研制

    Institute of Scientific and Technical Information of China (English)

    张宝忠; 严素荣; 张立德; 方克明

    2012-01-01

    用SiO2、ZnO、TiO2 3种纳米材料复合改性粉末涂料,显著改进涂膜的附着力和防蚀性,制得的纳米材料复合粉末涂料在铝合金型材上无铬钝化涂装,产品性能完全达到有关国标和行标的要求,某些性能超过对应的传统涂装的产品性能。对涂膜形态、涂膜与铝合金的界面结构用扫描电镜、透射电镜进行了表征。并介绍了该产品在减少六价铬的污染、节约成本上的重大意义及推广前景。%Nano-material compound modification powder coatings was prepared by using nano SiO2, ZnO and TiO2 three nano-material, the film adhesion and anticorrosion were improved significantly, the prepared nano-material compound powder coating was painting on the surface of aluminium alloy profile by chromium-free passivating coating process, the product properties fully meet the relevant national standard and industry standard, and some properties of the coating more than corresponding traditional product performance. The film conformation, film and the interface of aluminum alloy structure were characterized by scanning electron microscope and transmission electron microscopy. And the major significance and promotion prospects of the products in reducing the hexavalent chromium pollution and cost saving were introduced.

  16. Piezoelectric properties of the new generation active matrix hybrid (micro-nano) composites

    Science.gov (United States)

    Parali, Levent; Şabikoğlu, İsrafil; Kurbanov, Mirza A.

    2014-11-01

    A hybrid piezoelectric composite structure is obtained by addition of nano-sized BaTiO3, SiO2 to the micro-sized PZT and polymers composition. Although the PZT material itself has excellent piezoelectric properties, PZT-based composite variety is limited. Piezoelectric properties of PZT materials can be varied with an acceptor or a donor added to the material. In addition, varieties of PZT-based sensors can be increased with doping polymers which have physical-mechanical, electrophysical, thermophysical and photoelectrical properties. The active matrix hybrid structure occurs when bringing together the unique piezoelectric properties of micro-sized PZT with electron trapping properties of nano-sized insulators (BaTiO3 or SiO2), and their piezoelectric, mechanic and electromechanic properties significantly change. In this study, the relationship between the piezoelectric constant and the coupling factor values of microstructure (PZT-PVDF) and the hybrid structure (PZT-PVDF-BaTiO3) composite are compared. The d33 value and the coupling factor of the hybrid structure have shown an average of 54 and 62% increase according to microstructure composite, respectively. In addition, the d33 value and the coupling factor of the hybrid structure (PZT-HDPE-SiO2) have exhibited about 68 and 52% increase according to microstructure composite (PZT-HDPE), respectively.

  17. A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites

    Directory of Open Access Journals (Sweden)

    Naheed Saba

    2014-08-01

    Full Text Available The increasing demand for greener and biodegradable materials leading to the satisfaction of society requires a compelling towards the advancement of nano-materials science. The polymeric matrix materials with suitable and proper filler, better filler/matrix interaction together with advanced and new methods or approaches are able to develop polymeric composites which shows great prospective applications in constructions and buildings, automotive, aerospace and packaging industries. The biodegradability of the natural fibers is considered as the most important and interesting aspects of their utilization in polymeric materials. Nanocomposite shows considerable applications in different fields because of larger surface area, and greater aspect ratio, with fascinating properties. Being environmentally friendly, applications of nanocomposites offer new technology and business opportunities for several sectors, such as aerospace, automotive, electronics, and biotechnology industries. Hybrid bio-based composites that exploit the synergy between natural fibers in a nano-reinforced bio-based polymer can lead to improved properties along with maintaining environmental appeal. This review article intended to present information about diverse classes of natural fibers, nanofiller, cellulosic fiber based composite, nanocomposite, and natural fiber/nanofiller-based hybrid composite with specific concern to their applications. It will also provide summary of the emerging new aspects of nanotechnology for development of hybrid composites for the sustainable and greener environment.

  18. Mechanics in Composite Materials and Process

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dae Gil

    1993-03-15

    This book includes introduction of composite materials, stress, in-plane stiffness of laminates strain rate, ply stress, failure criterion and bending, composite materials micromechanics, composite plates and micromechanics of composite materials. It also deals with process of composite materials such as autoclave vacuum bag degassing process, connection of composite materials, filament winding process, resin transfer molding, sheet molding compound and compression molding.

  19. Poly (lactic acid organoclay nano composites for paper coating applications

    Directory of Open Access Journals (Sweden)

    Tatcha Sonjui

    2014-10-01

    Full Text Available Poly(lactic acid or PLA is a well-known biodegradable polymer derived from renewable resources such as corn strach, tapioca strach, and sugar cane. PLA is the most extensively utilized biodegradable polyester with potential to replace conventional petrochemical-based polymers. However, PLA has some drawbacks, such as brittleness and poor gas barrier properties. Nano composite polymers have experience and increasing interest due to their characteristics, especially in mechanical and thermal properties. The objectives of this research were to prepare PLA formulations using three different PLAs. The formulas giving high gloss coating film were selected to prepare nano composite film by incorporated with different amount of various types of organoclays. The physical properties of the PLA coating films were studied and it was found that the PLA 7000D with 0.1%w/w of Cloisite 30B provided decent viscosity for coating process. In addition, the nano composite coating films showed good physical properties such as high gloss, good adhesion, and good hardness. There is a possibility of using the obtained formulation as a paper coating film.

  20. Lightweight Aluminum/Nano composites for Automotive Drive Train Applications

    Energy Technology Data Exchange (ETDEWEB)

    Chelluri, Bhanumathi; Knoth, Edward A.; Schumaker, Edward J.

    2012-12-14

    During Phase I, we successfully processed air atomized aluminum powders via Dynamic Magnetic Compaction (DMC) pressing and subsequent sintering to produce parts with properties similar to wrought aluminum. We have also showed for the first time that aluminum powders can be processed without lubes via press and sintering to 100 % density. This will preclude a delube cycle in sintering and promote environmentally friendly P/M processing. Processing aluminum powders via press and sintering with minimum shrinkage will enable net shape fabrication. Aluminum powders processed via a conventional powder metallurgy process produce too large a shrinkage. Because of this, sinter parts have to be machined into specific net shape. This results in increased scrap and cost. Fully sintered aluminum alloy under this Phase I project has shown good particle-to-particle bonding and mechanical properties. We have also shown the feasibility of preparing nano composite powders and processing via pressing and sintering. This was accomplished by dispersing nano silicon carbide (SiC) powders into aluminum matrix comprising micron-sized powders (<100 microns) using a proprietary process. These composite powders of Al with nano SiC were processed using DMC press and sinter process to sinter density of 85-90%. The process optimization along with sintering needs to be carried out to produce full density composites.

  1. Lightweight Aluminum/Nano composites for Automotive Drive Train Applications

    Energy Technology Data Exchange (ETDEWEB)

    Chelluri, Bhanumathi; Knoth, Edward A.; Schumaker, Edward J.

    2012-12-14

    During Phase I, we successfully processed air atomized aluminum powders via Dynamic Magnetic Compaction (DMC) pressing and subsequent sintering to produce parts with properties similar to wrought aluminum. We have also showed for the first time that aluminum powders can be processed without lubes via press and sintering to 100 % density. This will preclude a delube cycle in sintering and promote environmentally friendly P/M processing. Processing aluminum powders via press and sintering with minimum shrinkage will enable net shape fabrication. Aluminum powders processed via a conventional powder metallurgy process produce too large a shrinkage. Because of this, sinter parts have to be machined into specific net shape. This results in increased scrap and cost. Fully sintered aluminum alloy under this Phase I project has shown good particle-to-particle bonding and mechanical properties. We have also shown the feasibility of preparing nano composite powders and processing via pressing and sintering. This was accomplished by dispersing nano silicon carbide (SiC) powders into aluminum matrix comprising micron-sized powders (<100 microns) using a proprietary process. These composite powders of Al with nano SiC were processed using DMC press and sinter process to sinter density of 85-90%. The process optimization along with sintering needs to be carried out to produce full density composites.

  2. Study on the Carbonyl Iron Powder Based Nano-Composite Radar Wave Absorbing Coatings

    Institute of Scientific and Technical Information of China (English)

    HUANG Dong-zhen; WANG Zhi-hui; LV Yan-hong; HU Chuan-xin; LI Wan-zhi; LIANG wen-ting; YAO Jun-min

    2004-01-01

    With the rapid development of stealth technique, carbonyl iron powder is regarded as an ideal radar absorbing material. In this paper, radar absorbing properties of carbonyl iron powder was investigated by using nano composite and macroscopic multi- layer composite approach. The machine- chemistry composite methods were employed during the experiment to produce nano composite absorbent. Two carbonyl iron powders named HP1, HP2 and nano powder named HP3 were employed. Absorbents were obtained by adding 10% HP3 powder with average size of 28 nm to the HP1 and HP2 carbonyl iron powders by weight respectively. By a series of composite techniques, sample plate with the radar absorbing coating was prepared. Compared with the single coating, the wave absorbing properties were significantly improved. The working band in which the wave reflectivity was less than 5 db was 4.8 ~ 18 GHz with the coating thickness of 1.0 mm. The lowest reflectivity was found to be 12.34 db at 8 GHz. The wave absorbing coating with thin thickness,broadband and strong absorbing properties was obtained.

  3. Magnetic properties of nano-composite particles

    Science.gov (United States)

    Xu, Xia

    Chemical synthesis routes for hollow spherical BaFe12O 19, hollow mesoporous spherical BaFe12O19, worm-shape BaFe12O19 and FeCo particles were developed. These structured particles have great potentials for the applications including magnetic recording medium, catalyst support, and energy storage. Magnetically exchange coupled hard/soft SrFe12O19/FeCo and MnBi/FeCo composites were synthesized through a newly proposed process of magnetic self-assembly. These exchange coupled composites can be potentially used as rare-earth free permanent magnets. Hollow spherical BaFe12O19 particles (shell thickness ˜5 nm) were synthesized from eth-ylene glycol assisted spray pyrolysis. Hollow mesoporous spherical BaFe12O19 particles (shell thickness ˜100 nm) were synthesized from ethanol assisted spray pyrolysis, followed by alkaline ethylene glycol etching at 185 °C. An alpha-Fe2O3 and BaCO3 nanoparticle mixture was synthesized with reverse microemulsion, followed by annealing at 900 °C for 2 hours to get worm-shape BaFe 12O19 particles, which consisted of 3-7 stacked hexagonal plates. FeCo nanoparticles were synthesized by reducing FeCl2 and CoCl2 in diphenyl ether with n-butyllithium at 200 °C in an inert gas environment. The surfactant of oleic acid was used in the synthesis to make particles well dispersed in nonpolar solvents (such as hexane). SrFe12O19/FeCo core/shell particles were prepared through a magnetic self-assembly process. The as-synthesized soft FeCo nanoparticles were magnetically attracted by hard SrFe12O19 parti-cles, forming a SrFe12O19/FeCo core/shell structure. The magnetic self-assembly mechanism was confirmed by applying alternating-current demagnetization to the core/shell particles, which re-sulted in a separation of SrFe 12O19 and FeCo particles. MnBi/FeCo composites were synthesized, and the exchange coupling between MnBi and FeCo phases was demonstrated by smooth magnetic hysteresis loop of MnBi/FeCo composites. The thermal stability of Mn

  4. Influence of Dispersion of Nano-ZnO Particles in Polymer Matrices on Properties of Relevant Nano Composite Fibers

    Institute of Scientific and Technical Information of China (English)

    WANG Yao; TANG Jian-guo

    2006-01-01

    The surface-passivated and non-surface-passivated zinc oxide nano-particles (marked as s-nanoZnO and ns-nanoZnO respectively) were evcnly dispersed in polymer solutions with thc aid of ultrasonic vibration to prepare nanocomposite film by free casting and to prepare nanocomposite fibers by wet spinning and to prepare nanocomposites coating by surface smearing. The dispersion of s-nanoZnO and nsnanoZnO in PAN matrix were observed by transmittance electron microscopy, the mechanical properties of the relevant composite samples were studied by INSRTON tensile strength tester. It was found that s-nanoZnO behaves a well-disporsed morphology in PAN films and fibers when its concentration was 2 wt% but ns-nanoZnO nano particles agglomerate into larger congeries in PAN films. It means that the surface-passivated process on zinc oxide nanoparticles was effective to disperse. The relative intensity and elongation at break of s-nanoZnO-PAN composite fibers show maximum values with the increase of nano particle content in composites (from 0 wt% to 2 wt% of snanoZnO). The elasticity of the conposite fibers increases whereas their modulus declines. Balanced the changes of the properties mentioned above, 2 wt% s-nanoZnO in PAN matrix is a proper content for the composite fibers spun by wet spinning. The result of surface smearing test means that the reaction between s-nanoZnO and polymer can be indicated by the color of nanocomposite surface coat on fibers.

  5. Fiber-reinforced composites materials, manufacturing, and design

    CERN Document Server

    Mallick, P K

    2007-01-01

    The newly expanded and revised edition of Fiber-Reinforced Composites: Materials, Manufacturing, and Design presents the most up-to-date resource available on state-of-the-art composite materials. This book is unique in that it not only offers a current analysis of mechanics and properties, but also examines the latest advances in test methods, applications, manufacturing processes, and design aspects involving composites. This third edition presents thorough coverage of newly developed materials including nanocomposites. It also adds more emphasis on underlying theories, practical methods, and problem-solving skills employed in real-world applications of composite materials. Each chapter contains new examples drawn from diverse applications and additional problems to reinforce the practical relevance of key concepts. New in The Third Edition: Contains new sections on material substitution, cost analysis, nano- and natural fibers, fiber architecture, and carbon-carbon composites Provides a new chapter on poly...

  6. Handbook of damage mechanics nano to macro scale for materials and structures

    CERN Document Server

    2015-01-01

    This authoritative reference provides comprehensive coverage of the topics of damage and healing mechanics. Computational modeling of constitutive equations is provided as well as solved examples in engineering applications. A wide range of materials that engineers may encounter are covered, including metals, composites, ceramics, polymers, biomaterials, and nanomaterials. The internationally recognized team of contributors employ a consistent and systematic approach, offering readers a user-friendly reference that is ideal for frequent consultation. Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures is ideal for graduate students and faculty, researchers, and professionals in the fields of Mechanical Engineering, Civil Engineering, Aerospace Engineering, Materials Science, and Engineering Mechanics.

  7. Mechanical properties and tribological behaviour of silicon carbide/carbon nano fibers nano composites; Propiedades mecanicas y tribologicas de materiales nanoestructurados de carburo de silicio/nanofibras de carbono

    Energy Technology Data Exchange (ETDEWEB)

    Borrell, A.; Torrecillas, R.; Rocha, V. G.; Fernandez, A.; Bonache, V.; Salvador, M. D.

    2011-07-01

    The development of new ceramic/carbon nano structured materials is a very interesting option from the point of view of the automotive and aerospace industries. Its low density, high mechanical strength, high oxidation resistance and excellent friction behavior allows the use of these composites as functional materials. The aim of this study was to evaluate the influence of carbon nano fibers (CNFs) on the mechanical and tribological behavior of silicon carbide/CNFs nano composite obtained by spark plasma sintering technique. The tribological study was carried out in a ball-on-disk apparatus under dry sliding conditions (dry friction) and a fixed load of 15 N. The friction coefficient and wear rate were measured for each composite. Scanning electron microscope was used to analyze wear surface formed. The results show simultaneous improvement of wear behavior and mechanical properties of ceramic materials by incorporating of carbon nano fibers. (Author) 23 refs.

  8. Preparation and characterization of antimicrobial nano-hydroxyapatite composites

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Juhong [The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou 310018 (China); Chu, Xiaobing [The First Affiliated Hospital, Zhejiang Chinese Medicine University, Hangzhou 310006 (China); Cai, Yurong [The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou 310018 (China); Tong, Peijian [The First Affiliated Hospital, Zhejiang Chinese Medicine University, Hangzhou 310006 (China); Yao, Juming, E-mail: yaoj@zstu.edu.cn [The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou 310018 (China)

    2014-04-01

    Deep infection of prosthesis is one of the most frequent complications after joint replacement. One of the most effective ways is to introduce directly some antibiotics in the local site of the surgery. In the present study, an antimicrobial composite has been fabricated using nano-hydroxyapatite particles as carriers for the antimicrobial drug of vancomycin hydrochloride (VAN) and the mixture of oxidation sodium alginate (OSA) and gelatin (GT) as a sticky matrix. Samples have been characterized using X-ray diffraction instrument (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM) and Fourier transform infrared (FTIR) spectra, Brunauer–Emmett–Teller (BET) methods, the rotational rheometer and the texture analyzer. The release of VAN from nano-hydroxyapatite (nHAP) particles was detected by the ultraviolet–visible (UV–vis) spectrophotometer and then bactericidal property of the composite was evaluated using the Staphylococcus aureus (S. aureus) as a bacterial model. Experimental results showed that the composite possessed an adhesive property derived from the gel of OSA and GT, which implied that the composite could bond directly to the fracture surface of bones in surgery. Furthermore, VAN was loaded efficiently on the surface of nHAP particles and could be released slowly from these particles, which endowed the composite with an obvious and continuous antimicrobial performance. The sticky and antimicrobial composite may has a potential application in arthroplasty to overcome deep infection in a simple and direct manner. - Highlights: • A sticky and antimicrobial composite has been designed to overcome deep infection. • The composite was composed of antibiotic, antibiotic carrier and a viscous matrix. • The sticky matrix was obtained by blending of oxidation sodium alginate and gelatin. • Hydroxyapatite nanoparticle could be used as carrier to control release of antibiotic.

  9. Nano-composite Structures for OPV Devices

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Henning

    2010-11-23

    Improved material for use in organic photovoltaics (OPV) devices, also called polymer-solar cells (PSC), has been developed. Increased ordering of the active layer of bulk heterojunction (BHJ) cells has been achieved by the use of inert silica spheres in conjunction with suitable fullerene derivatives. Silica spheres with average diameters between 10 and 15 nm, consistent with the exciton diffusion length in the active layer, have been added. The potential for significantly improved device performance due to a higher degree of photon absorption, enabled by increased light scattering, and a maximized interface between electron donor and acceptor, ensuring efficient exciton dissociation, has been demonstrated. A method allowing for the covalent attachment of fullerene derivatives to the silica sphere surface has been developed.

  10. Designing a New Nano-Plant Composite of Cucurbita pepo for Wound Repair of Skin in Male Albino Mice: A New Nano Approach for Skin Repair

    Directory of Open Access Journals (Sweden)

    Nooshin Naghsh

    2013-06-01

    Full Text Available Background & Objective : The Cucurbita pepo is one of plants that are functional in traditional therapy. This plant has antioxidant and skin damage repair properties. This study investigated the effect of Cucurbita pepo nano silver as a new nano-plant composition in wound repair skin in male mice.   Materials & Methods: In this investigation, male albino mice were places in 8 groups, each containing 8 animals. Group I – VIII were treated with nano silver (500, 250, and 125 ppm concentrations and different concentrations of extracts [70%, 50%, and 25%] and the control group received a mixture of 25% Cucurbita pepo extract (125 ppm nano silver. The eighth group, as control, was treated with sterile deionizer water after the induction of wound skin. The average diameter of the wounds was measured 28 days after treatment in the control and treatment groups. These data were analyzed using the t-test and ANOVA statistical method.   Results: The results of this study showed that ethanol extraction (80% has its highest repair effect 28 days post treatment. The average diameter of the wounds in the control group was 1.16 ±. 0.46 cm, which was decreased to 0 cm and 0.12 ±. 0.23 cm in the ethanol extract (70% of the Cucurbita pepo and component groups, respectively (p value ≤ 0.01.   Conclusion: In this project, nano silver-Cucurbita pepo ethanol extraction for wound repair in albino male mice was more effective than single materials. These findings show that the repair synergic effects are between alcoholic extract and nano silver in this nano composite.

  11. Material Modelling - Composite Approach

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    1997-01-01

    in this report is that cement paste and concrete behave practically as linear-viscoelastic materials from an age of approximately 10 hours. This is a significant age extension relative to earlier studies in the literature where linear-viscoelastic behavior is only demonstrated from ages of a few days. Thus......, linear-viscoelastic analysis methods are justified from the age of approximately 10 hours.The rheological properties of plain cement paste are determined. These properties are the principal material properties needed in any stress analysis of concrete. Shrinkage (autogeneous or drying) of mortar...... and concrete and associated internal stress states are examples of analysis made in this report. In this context is discussed that concrete strength is not an invariable material property. It is a property the potentials of which is highly and negatively influenced by any damage caused by stress concentrations...

  12. Electrochemical Synthesis of Graphene/MnO2 Nano-Composite for Application to Supercapacitor Electrode.

    Science.gov (United States)

    Jeong, Kwang Ho; Lee, Hyeon Jeong; Simpson, Michael F; Jeong, Mun

    2016-05-01

    Graphene/MnO2 nano-composite was electrochemically synthesized for application to an electrode material for electrochemical supercapacitors. The nanosized needle-like MnO2 was obtained by use of a graphene substrate. The prepared composite exhibited an ideal supercapacitive behavior. A capacitance retention of 94% was achieved with a 4 h deposition time (an initial capacitance of 574 mF/cm2 at a scan rate of 20 mV/s) and the retention declined with further deposition time. The results demonstrate enhanced contact between the electrode and electrolyte and improved power density as an electrochemical capacitor.

  13. Carbon nanotube composite materials

    Energy Technology Data Exchange (ETDEWEB)

    O' Bryan, Gregory; Skinner, Jack L; Vance, Andrew; Yang, Elaine Lai; Zifer, Thomas

    2015-03-24

    A material consisting essentially of a vinyl thermoplastic polymer, un-functionalized carbon nanotubes and hydroxylated carbon nanotubes dissolved in a solvent. Un-functionalized carbon nanotube concentrations up to 30 wt % and hydroxylated carbon nanotube concentrations up to 40 wt % can be used with even small concentrations of each (less than 2 wt %) useful in producing enhanced conductivity properties of formed thin films.

  14. Carbon nanotube composite materials

    Science.gov (United States)

    O'Bryan, Gregory; Skinner, Jack L; Vance, Andrew; Yang, Elaine Lai; Zifer, Thomas

    2015-03-24

    A material consisting essentially of a vinyl thermoplastic polymer, un-functionalized carbon nanotubes and hydroxylated carbon nanotubes dissolved in a solvent. Un-functionalized carbon nanotube concentrations up to 30 wt % and hydroxylated carbon nanotube concentrations up to 40 wt % can be used with even small concentrations of each (less than 2 wt %) useful in producing enhanced conductivity properties of formed thin films.

  15. Synthesis, characterization and application of functional carbon nano materials

    Science.gov (United States)

    Chu, Jin

    The synthesis, characterizations and applications of carbon nanomaterials, including carbon nanorods, carbon nanosheets, carbon nanohoneycombs and carbon nanotubes were demonstrated. Different growth techniques such as pulsed laser deposition, DC/RF sputtering, hot filament physical vapour deposition, evaporative casting and vacuum filtration methods were introduced or applied for synthesizing carbon nanomaterials. The morphology, chemical compositions, bond structures, electronic, mechanical and sensing properties of the obtained samples were investigated. Tilted well-aligned carbon micro- and nano- hybrid rods were fabricated on Si at different substrate temperatures and incident angles of carbon source beam using the hot filament physical vapour deposition technique. The morphologic surfaces and bond structures of the oblique carbon rod-like structures were investigated by scanning electron microscopy, field emission scanning electron microscopy, transmission electron diffraction and Raman scattering spectroscopy. The field emission behaviour of the fabricated samples was also tested. Carbon nanosheets and nanohoneycombs were also synthesized on Si substrates using a hot filament physical vapor deposition technique under methane ambient and vacuum, respectively. The four-point Au electrodes are then sputtered on the surface of the nanostructured carbon films to form prototypical humidity sensors. The sensing properties of prototypical sensors at different temperature, humidity, direct current, and alternative current voltage were characterized. Linear sensing response of sensors to relative humidity ranging from 11% to 95% is observed at room temperature. Experimental data indicate that the carbon nanosheets based sensors exhibit an excellent reversible behavior and long-term stability. It also has higher response than that of the humidity sensor with carbon nanohoneycombs materials. Conducting composite films containing carbon nanotubes (CNTs) were prepared in

  16. Protein adsorption on materials surfaces with nano-topography

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Protein adsorption behavior on the surfaces of biomedical materials is highly related to the biocompatibility of the materials. In the past, numerous research reports were mainly focused on the effect of chemical components of a material's surface on protein adsorption. The effect of surface topography on protein adsorption, the topic of this review, has recently receuvedkeen interest. The influence of surface nano-topographic factors, including roughness, curvature and geometry, on protein adsorption as well as the protein adsorption behavior, such as the amount of protein adsorbed, the activity and morphology of adsorbed protein, is introduced.

  17. Adhesion forces due to nano-triboelectrification between similar materials

    CERN Document Server

    Guerret-Piecourt, Christelle; Ségault, Frédéric; Juvé, Denyse; Tréheux, Daniel; Tonck, André

    2004-01-01

    Contact electrification and triboelectrification are well-known in the case of dissimilar materials, however the case of charge exchange during friction between nominally identical insulating materials is less documented. We experimentally investigated the triboelectrification between two smooth monocrystalline α-Al 2O 3 (sapphire) antagonists by surface force measurements with a Surface Force Apparatus (SFA). The force between a sphere and a plane, both in sapphire, was measured as a function of the sphere-plane distance D, before and after nano-friction tests, under dry argon atmosphere. Respective contributions of van der Waals, water meniscus and electrostatic forces were determined. The estimated Hamaker constant was in good agreement with the Lifshitz theory, and the dominant meniscus attraction at low separation could be overcome with small radius sphere. We demonstrated that electrostatic forces were generated by the nano-friction test and we quantified the adhesion that results from this con...

  18. Synthesis and Characterization of Nano Hydroxyapatite with Poly Vinyl Pyrrolidone Nano Composite for Bone Tissue Regeneration

    Directory of Open Access Journals (Sweden)

    A. Ragu

    2014-07-01

    Full Text Available Hydroxyapatite (Ca10 (PO46(OH2 , the main mineral component of bone and teeth, is native to the human body. Hydroxyapatite (HAp is a desirable implant material due to its biocompatibility and osteoconductivity properties. In this study, nano hydroxyapatite (nHAp with poly vinyl pyrrolidone (PVP was synthesized at room temperature condition. The synthetic nano hydroxyapatite (nHAp prepared by wet chemical precipitation method was investigated. Hydroxyapatite is biocompatible with the human organism and is capable of integrating biologically into bone tissue. The synthesized sample were characterized by Fourier transformed infrared spectroscopy (FTIR, X-ray diffraction (XRD, Transmission electron microscope (TEM, Energy dispersive analysis of x-rays techniques (EDAX and Micro hardness test.

  19. Multilayer Electroactive Polymer Composite Material Comprising Carbon Nanotubes

    Science.gov (United States)

    Ounaies, Zoubeida (Inventor); Park, Cheol (Inventor); Harrison, Joycelyn S. (Inventor); Holloway, Nancy M. (Inventor); Draughon, Gregory K. (Inventor)

    2009-01-01

    An electroactive material comprises multiple layers of electroactive composite with each layer having unique dielectric, electrical and mechanical properties that define an electromechanical operation thereof when affected by an external stimulus. For example, each layer can be (i) a 2-phase composite made from a polymer with polarizable moieties and an effective amount of carbon nanotubes incorporated in the polymer for a predetermined electromechanical operation, or (ii) a 3-phase composite having the elements of the 2-phase composite and further including a third component of micro-sized to nano-sized particles of an electroactive ceramic incorporated in the polymer matrix.

  20. Optimizing Energy Conversion: Magnetic Nano-materials

    Science.gov (United States)

    McIntyre, Dylan; Dann, Martin; Ilie, Carolina C.

    2015-03-01

    We present herein the work started at SUNY Oswego as a part of a SUNY 4E grant. The SUNY 4E Network of Excellence has awarded SUNY Oswego and collaborators a grant to carry out extensive studies on magnetic nanoparticles. The focus of the study is to develop cost effective rare-earth-free magnetic materials that will enhance energy transmission performance of various electrical devices (solar cells, electric cars, hard drives, etc.). The SUNY Oswego team has started the preliminary work for the project and graduate students from the rest of the SUNY 4E team (UB, Alfred College, Albany) will continue the project. The preliminary work concentrates on analyzing the properties of magnetic nanoparticle candidates, calculating molecular orbitals and band gap, and the fabrication of thin films. SUNY 4E Network of Excellence Grant.

  1. Alternative Antimicrobial Approach: Nano-Antimicrobial Materials

    Directory of Open Access Journals (Sweden)

    Nurit Beyth

    2015-01-01

    Full Text Available Despite numerous existing potent antibiotics and other antimicrobial means, bacterial infections are still a major cause of morbidity and mortality. Moreover, the need to develop additional bactericidal means has significantly increased due to the growing concern regarding multidrug-resistant bacterial strains and biofilm associated infections. Consequently, attention has been especially devoted to new and emerging nanoparticle-based materials in the field of antimicrobial chemotherapy. The present review discusses the activities of nanoparticles as an antimicrobial means, their mode of action, nanoparticle effect on drug-resistant bacteria, and the risks attendant on their use as antibacterial agents. Factors contributing to nanoparticle performance in the clinical setting, their unique properties, and mechanism of action as antibacterial agents are discussed in detail.

  2. STUDIES ON COMBUSTION BEHAVIOR OF NR/MMT NANO-COMPOSITES BY CONE CALORIMETER

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The NR/modified montmorillonite (EMT)nano-composites wen prepared by mechanical mixing and reacting in situ with glycidyl methacrylate.Under 30kW·m-2 of heat flux,the combustion behavior of the nano-composites was studied with cone calorimetry,and PHRR,THR,EHC,TSR and MLR were tested.The results showed that the nanocomposite had improved mechanical properties and flame retardance properties,and to some extent,the nano-composite had smoke suppress effect.Compared with pure NR,the PHRR,EHC and SPR of the nano-composite reduced by 34%,21% and 16.8%,respectively.

  3. Effect of nano-SiO2 on water vapor transmission rate of formed film of PVA-based composite coating-packaging material%纳米SiO2对PVA基复合涂膜包装材料成膜透湿性能的影响

    Institute of Scientific and Technical Information of China (English)

    雷艳雄; 尹月玲; 靳国锋; 章建浩

    2011-01-01

    Application of polyvinyl alcohol (PVA) in food packaging is greatly limited because of its hydrophilic property. PVA-based composite coating-packaging material was modified by adding nano-SiO2 in order to improve the efficiency of water vapor barrier. The individual and interactive effects of nano-SiO2, stearic acid, and glutaraldehyde on the water vapor transmission of formed film of composite coating-packaging material were investigated by response surface methodology. The results showed that the water vapor barrier performance of the PVA-based composite coating-packaging material could be effectively enhanced by modifying of nano-SiO2- The water vapor transmission ratio of formed film of optimize group (8.18 g/(m2-d)) was decreased by 26.61% (P<0.05) compared with the control group (no nano-SO2). There were significant interactions between nano-SiO2 and stearic acid and between nano-SiO2 and glutaraldehyde for the effects on the water vapor transmission of formed film of composite coating-packaging material. With the increase of nano-SiO2 within the range below 0.05 g in 100 Ml PVA solution (0.05 g/Ml), the water vapor transmission rate of composite coating-packaging material was decreased and the water vapor barrier performance was improved with the increase of the proportion of stearic acid and glutaraldehyde .%为改善聚乙烯醇(PVA)涂膜的阻湿保鲜效能特性,该文采用添加纳米SiO2对PVA基复合涂膜包装材料进行改性,应用响应曲面方法研究SiO2、硬脂酸、戊二醛对三元复合涂膜材料成膜效能特性的影响及交互作用.结果表明:加入纳米SiO2改性可有效提高PVA基复合涂膜包装材料的阻水、阻湿性能,优化组成膜透湿率8.18 g/(m2.d)比对照组(不添加纳米SiO2的PVA复合膜)降低26.61%(p<0.05);硬脂酸、戊二醛对复合涂膜材料成膜透湿率的影响与纳米SiO2存在显著的交互作用,每100 mL 0.05 g/mL的PVA溶液中纳米SiO2添加量在小于0.05 g

  4. Digital laser printing of metal/metal-oxide nano-composites with tunable electrical properties

    Science.gov (United States)

    Zenou, M.; Sa'ar, A.; Kotler, Z.

    2016-01-01

    We study the electrical properties of aluminum structures printed by the laser forward transfer of molten, femtoliter droplets in air. The resulting printed material is an aluminum/aluminum-oxide nano-composite. By controlling the printing conditions, and thereby the droplet volume, its jetting velocity and duration, it is possible to tune the electrical resistivity to a large extent. The material resistivity depends on the degree of oxidation which takes place during jetting and on the formation of electrical contact points as molten droplets impact the substrate. Evidence for these processes is provided by FIB cross sections of printed structures.

  5. A study of apatite formation on natural nano-hydroxyapatite/ chitosan composite in simulated body fluid

    Institute of Scientific and Technical Information of China (English)

    Yong-bin FAN; Xiao-ying L(U)

    2008-01-01

    This study is focused on the ability of apatite formation on the surface of nano-hydroxyapatite (HA)/chitosan (CH) composite in simulated body fluid (SBF) in vitro. At first, natural nano-HA was prepared according to a wet-bailing method and the composite was prepared by combining the natural nano-hydroxyapatite and chit-osan, and then in vitro biomineralization test of natural nano-HA/CH composite was carried out in standard SBF. Subsequently, the quantity of the weight of the particles formed on the composite surface in SBF was measured by analytical balance, and the morphology change on the surface of the composite was observed by a scanning elec-tron microscope (SEM). Lastly, a Fourier transform infrared spectroscope (FTIR) was used to investigate the chemical components of the particles formed on the nat-ural nano-HA/CH composite surface in SBF. The result of quantity assessment shows that the weight of the com-posite increased with the increase of soaking time. The SEM image shows that the particles were gradually formed on natural nano-HA/CH composite surface, and the FTIR spectrum of the particles on composite surface confirms that these particles were carbonate apatite. This study indicates that the nano-HA/CH composite has a good ability for apatite formation in SBF, which predicts the bone-inducing ability of natural nano-HA/CH com-posite in vivo.

  6. Hybrid and hierarchical composite materials

    CERN Document Server

    Kim, Chang-Soo; Sano, Tomoko

    2015-01-01

    This book addresses a broad spectrum of areas in both hybrid materials and hierarchical composites, including recent development of processing technologies, structural designs, modern computer simulation techniques, and the relationships between the processing-structure-property-performance. Each topic is introduced at length with numerous  and detailed examples and over 150 illustrations.   In addition, the authors present a method of categorizing these materials, so that representative examples of all material classes are discussed.

  7. Nano-modification to improve the ductility of cementitious composites

    Energy Technology Data Exchange (ETDEWEB)

    Yeşilmen, Seda [Department of Civil Engineering, Çankaya University, Ankara (Turkey); Al-Najjar, Yazin [Department of Civil Engineering, Gaziantep University, Gaziantep (Turkey); Balav, Mohammad Hatam [Department of Civil Engineering, Gazi University, Ankara (Turkey); Şahmaran, Mustafa, E-mail: sahmaran@gazi.edu.tr [Department of Civil Engineering, Gazi University, Ankara (Turkey); Yıldırım, Gürkan [Department of Civil Engineering, Gazi University, Ankara (Turkey); Lachemi, Mohamed [Department of Civil Engineering, Ryerson University, Toronto, ON (Canada)

    2015-10-15

    Effect of nano-sized mineral additions on ductility of engineered cementitious composites (ECC) containing high volumes of fly ash was investigated at different hydration degrees. Various properties of ECC mixtures with different mineral additions were compared in terms of microstructural properties of matrix, fiber-matrix interface, and fiber surface to assess improvements in ductility. Microstructural characterization was made by measuring pore size distributions through mercury intrusion porosimetry (MIP). Hydration characteristics were assessed using thermogravimetric analysis/differential thermal analysis (TGA/DTA), and fiber-matrix interface and fiber surface characteristics were assessed using scanning electron microscopy (SEM) through a period of 90 days. Moreover, compressive and flexural strength developments were monitored for the same period. Test results confirmed that mineral additions could significantly improve both flexural strength and ductility of ECC, especially at early ages. Cheaper Nano-CaCO{sub 3} was more effective compared to nano-silica. However, the crystal structure of CaCO{sub 3} played a very important role in the range of expected improvements.

  8. Study of Nano-alumina Impact on the Performance of a CaCO3-Epoxy Composite Coating

    Directory of Open Access Journals (Sweden)

    Li Chen

    2016-06-01

    Full Text Available CaCO3-epoxy composite coatings containing different qualities of nano-Al2O3 were successfully prepared. Infrared spectroscopy was used to verify whether the nano- Al2O3 was modified successfully and scanning electron microscopic (SEM pictures were taken to study the inner morphology of the composite coatings. When tested by the hydraulic universal material testing system (MTS, it was found that the mechanical performances of composite coatings worsened after added nano-Al2O3. Thermo gravimetric analysis (TGA and differential scanning calorimetry (DSC indicated that the thermal stability of composite coatings increased after nano-Al2O3 was added; the abrasion resistance test explained that wear resistance also improved. Finally, it was found that the comprehen‐ sive performances of composite coatings for anticorrosion and adhesive strength were best after being tested under 63MPa and 165°C in an autoclave, when added at 10wt% nano-Al2O3.

  9. Properties and interfacial microstructure of cement-based materials with composite micro-grains

    Institute of Scientific and Technical Information of China (English)

    FENG Qi; BA Heng-jing; LIU Jun-zhe

    2005-01-01

    Silica fume, fly ash and nano-fiber mineral materials (NR powder) are employed to incorporate into cement-based materials. According to the grain grading mathematical model of cement-based materials, two packing systems, namely, spherical grading system and nano-fiber reinforced system were designed. Properties and interfacial microstructure of the two systems were studied according to secondary interface theory. It was shown that nano-fiber mineral materials can improve the grain grading of the admixture, increase the density of the system, improve the microstructure of the interface and the hardened paste, and enhance the uniformity of cement-based materials mixed with composite micro-grains and greatly increase their wearable rigidity and flexure strength. In this paper, two kinds of interface models, including spherical grain model and nano-fiber reinforced interface model of the cement-based materials mixed with composite micro-grains, were brought forward.

  10. Mineralogical characterization of Brazilians attapulgite to magnetic nano composites uses; Caracterizacao mineralogica de atapulgitas brasileiras para utilizacao em nanocompositos magneticos

    Energy Technology Data Exchange (ETDEWEB)

    Middea, Antonieta; Neumann, Reiner, E-mail: amiddea@cetem.gov.br [Centro de Tecnologia Mineral - CETEM, Rio de Janeiro, RJ (Brazil); Spinelli, Luciana S.; Lucas, Elizabete F. [Universidade Federal do Rio de Janeiro, Instituto de Macromoleculas, Laboratorio de Macromoleculas e Coloides na Industria de Petroleo, Rio de Janeiro, RJ (Brazil)

    2011-07-01

    Magnetic polymeric nano composites represent a potential alternative in the treatment of contaminated water. This work aims to investigate the potential of uses of a Brazilian clay (an attapulgite), abundant in the northeast, in the preparation of polymeric nano composites for application in the removal of organic material present in aquifers, using magnetic field. The techniques used for mineralogical characterization were X-ray diffraction (XRD) and scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS). The results showed the presence of palyigorskite in all samples as well as other mineral phases (quartz, kaolinite, smectite and anatase). The microscopic analysis permitted to identify the fibrous appearance of palyigorskite. The presence of palyigorskite is a strong indication of the possible use of attapulgite in obtaining magnetic nano composites by the adsorption of iron ion to the surface. (author)

  11. Application of nano-TiO2/LDPE composite film on photocatalytic oxidation degradation of dichloromethane.

    Science.gov (United States)

    Suwannahong, Kowit; Liengcharernsit, Winai; Sanongraj, Wipada; Kruenate, Jittiporn

    2012-09-01

    This study focused on the photocatalytic destruction of dichloromethane (DCM) in indoor air using the nano-TiO2/LDPE composite film as an economical photocatalyst. The nano-TiO2 was dispersed in a polyethylene matrix to form composite film. The photocatalytic activity of the nano-TiO2/LDPE composite films was evaluated through the degradation of dichloromethane(DCM) under UV-C irradiance at specific wavelength of 254 nm. The percentage of nano-TiO2 contents varied from 0, 5, and 10% (wt cat./wt LDPE composite film). The results derived from the kinetic model revealed that the photocatalytic rates of 5 and 10 wt.% nano-TiO2/ LDPE composite films follow the first order reaction while the rate of the film without TiO2 followed the zero order reaction. At low concentration of DCM, the rate of photocatalytic degradation of the DCM was slower than that at high DCM concentration. The 10 wt.% of TiO2 content of the nano-TiO2/LDPE composite film yielded the highest degradation efficiency of 78%, followed by the removal efficiency of 55% for the 5 wt.% of TiO2 content of the nano-TiO2/LDPE composite film. In contrast with the composite film containing nano-TiO2, the LDPE film without adding nano-TiO2 expressed the degradation efficiency of 28%.

  12. Optical Spectroscopy of Nano Materials and Structures

    Science.gov (United States)

    Guo, Wenhao

    In this thesis, nanostructures and nanomaterials ranging from 3D to OD will be studied compresively, by using optical methods. Firstly, for 3D and 2D nanomaterials, nanoporous zeolite crystals, such as AFI and AEL are introduced as host materials to accommodate diatomic iodine molecules. Polarized Raman spectroscopy is utilized to identify the two configurations of iodine molecules to stay in the channels of AEL: the lying mode (the bond of the two atoms is parallel to the direction of the channels) and the standing mode (the bond is perpendicular to the direction of the channels). The lying mode and standing mode are switchable and can be well controlled by the amount of water molecules inside the crystal, revealed by both molecule dynamics simulation and experiment observation. With more water molecules inside, iodine molecules choose to stay in the standing mode, while with less water molecules, iodine molecules prefer to lie along the channel. Therefore, the configurations of molecules could be precisely controlled, globally by the surrounding pressure and temperature, and locally by the laser light. Ii is believed that this easy and reversible control of single molecule will be valuable in nanostructured devices, such as molecular sieving or molecular detection. Secondly, for 1D case, the PL spectrum of ZnO nanowire under uniaxial strain is studied. When a ZnO nanowire is bent, besides the lattice constant induced bandgap change on the tensile and compressive sides, there is a piezoelectric field generated along the cross section. This piezoelectric potential, together with the bandgap changes induced by the deformation, will redistribute the electrons excited by incident photons from valence band to conduction band. As a result, the electrons occupying the states at the tensile side will largely outnumbered the ones at the compressive side. Therefore, the PL spectrum we collected at the whole cross section will manifest a redshift, other than the peak

  13. Manufacturing of aluminium nano hybrid composites: a state of review

    Science.gov (United States)

    Madhukar, P.; Selvaraj, N.; Rao, CSP

    2016-09-01

    This paper gives the details of hybrid composites, their fabrication methods and evaluation of mechanical, tribological behaviour and machining characteristics. Investigations on the various aspects of Hybrid composites furnish several conclusions regarding the influence of various parameters on the performance of the composites. Mostly micro structures of the hybrid composites fabricated through casting routes have been found to be stable with the distribution of uniformed reinforce particles. therefore, the hybrid composites can be constructed with various combinations of reinforcements to carry out desirable mechanical properties. The density of Hybrid composites increases with increasing reinforcements such as SiC, TiC, B4C....etc, while incorporation of partial reinforcements like fly ash, mica, rice husk, etc. reduces the density of composites. The study also reports that the hybrid composites can be treated as a replacement for regular composite materials in different advanced applications.

  14. Generation of nano roughness on fibrous materials by atmospheric plasma

    Science.gov (United States)

    Kulyk, I.; Scapinello, M.; Stefan, M.

    2012-12-01

    Atmospheric plasma technology finds novel applications in textile industry. It eliminates the usage of water and of hazard liquid chemicals, making production much more eco-friendly and economically convenient. Due to chemical effects of atmospheric plasma, it permits to optimize dyeing and laminating affinity of fabrics, as well as anti-microbial treatments. Other important applications such as increase of mechanical resistance of fiber sleeves and of yarns, anti-pilling properties of fabrics and anti-shrinking property of wool fabrics were studied in this work. These results could be attributed to the generation of nano roughness on fibers surface by atmospheric plasma. Nano roughness generation is extensively studied at different conditions. Alternative explanations for the important practical results on textile materials and discussed.

  15. Nano-materials Enabled Thermoelectricity from Window Glasses

    KAUST Repository

    Inayat, Salman Bin

    2012-11-13

    With a projection of nearly doubling up the world population by 2050, we need wide variety of renewable and clean energy sources to meet the increased energy demand. Solar energy is considered as the leading promising alternate energy source with the pertinent challenge of off sunshine period and uneven worldwide distribution of usable sun light. Although thermoelectricity is considered as a reasonable renewable energy from wasted heat, its mass scale usage is yet to be developed. Here we show, large scale integration of nano-manufactured pellets of thermoelectric nano-materials, embedded into window glasses to generate thermoelectricity using the temperature difference between hot outside and cool inside. For the first time, this work offers an opportunity to potentially generate 304 watts of usable power from 9 m2 window at a 206C temperature gradient. If a natural temperature gradient exists, this can serve as a sustainable energy source for green building technology.

  16. Genetic Homogenization of Composite Materials

    Directory of Open Access Journals (Sweden)

    P. Tobola

    2009-04-01

    Full Text Available The paper is focused on numerical studies of electromagnetic properties of composite materials used for the construction of small airplanes. Discussions concentrate on the genetic homogenization of composite layers and composite layers with a slot. The homogenization is aimed to reduce CPU-time demands of EMC computational models of electrically large airplanes. First, a methodology of creating a 3-dimensional numerical model of a composite material in CST Microwave Studio is proposed focusing on a sufficient accuracy of the model. Second, a proper implementation of a genetic optimization in Matlab is discussed. Third, an association of the optimization script and a simplified 2-dimensional model of the homogeneous equivalent model in Comsol Multiphysics is proposed considering EMC issues. Results of computations are experimentally verified.

  17. Investigation of nano-talc as a filling material and a reinforcing agent in high density polyethylene (HDPE)

    Institute of Scientific and Technical Information of China (English)

    CHEN Nanchun; MA Lei; ZHANG Tao

    2006-01-01

    An experiment of producing high density polyethylene (HDPE) nano-composite filled with 4wt.% talc was presented. Acting as filler and a reinforcing agent in the HDPE, talc powder, sized at around 5 μm, was surface-treated with aluminum diethylene glycol dinitrate coupling agent before adding to the HDPE. Analyses of the reinforced HDPE nano-composite show significant improvement in its mechanical properties including, tensile strength (>26 MPa), break elongation (<1.1%), flexural strength (>22 MPa), and friction coefficients<0.11. The results demonstrate that, after surface-treated, talc can be used as a promising filling material and a reinforcing agent in making HDPE nano-composite.

  18. Ecotoxicity of selected nano-materials to aquatic organisms.

    Science.gov (United States)

    Blaise, C; Gagné, F; Férard, J F; Eullaffroy, P

    2008-10-01

    Present knowledge concerning the ecotoxic effects of nano-materials is very limited and merits to be documented more fully. For this purpose, we appraised the toxicity of nine metallic nano-powders (copper zinc iron oxide, nickel zinc iron oxide, yttrium iron oxide, titanium dioxide, strontium ferrite, indium tin oxide, samarium oxide, erbium oxide, and holmium oxide) and of two organic nano- powders (fullerene-C60 and single-walled carbon nanotube or SWCNT). After a simple process where nano-powders (NPs) were prepared in aqueous solution and filtered, they were then bioassayed across several taxonomic groups including decomposers (bacteria), primary producers (micro-algae), as well as primary and secondary consumers (micro-invertebrates and fish). Toxicity data generated on the 11 NPs reflected a wide spectrum of sensitivity that was biological level-, test-, and endpoint-specific. With all acute and chronic tests confounded for these 11 NPs, toxicity responses spanned over three orders of magnitude: >463 mg/L (24 h LC50 of the invertebrate Thamnoplatyurus platyurus for fullerene-C60) / 0.3 mg/L (96 h EC50 of the invertebrate Hydra attenuata for indium tin oxide), that is a ratio of 1543. On the basis of the MARA (Microbial Array for Risk Assessment) assay toxic fingerprint concept, it is intimated that NPs may have different modes of toxic action. When mixed in a 1:1 ratio with a certified reference material (CRM) sediment, two solid phase assays and an elutriate assay, respectively, showed that five NPs (copper zinc iron oxide, samarium oxide, erbium oxide, holmium oxide, and SWCNT) were able to increase both CRM sediment toxicity and its elutriate toxicity. This initial investigation suggests that chemicals emerging from nanotechnology may pose a risk to aquatic life in water column and sediment compartments and that further studies on their adverse effects are to be encouraged.

  19. Designing of Hybrid Structured Glass Laminated Transparent Nano Composites through Vacuum infusion Technique

    Science.gov (United States)

    Mukherji, A.; Tarapure, N. D.; Wakure, G. N.

    2017-05-01

    Glass is the most commonly used transparent material. However, glass is not suitable in applications where low weight, high strength is required. The present invention comprises a method of making a Transparent Glass Laminated Nano composite product. The product contains a Bidirectionally oriented E-Glass Fabric an essentially bidirectional yarn woven fabrics is stretched Bidirectionally by specially fabricated steel frame associated with both co and counter rotating device. These fibers include glass fibrics/cloths or mixtures of any of these. The synthetic fiber may be any synthetic silica based oven waived bi-directional or Uni-directional fabrics. Engaged gear provided in the device develops uniform tension on fabric, in both direction. Nano particle dispersed resin to be used is formulated with their respective curing agents and extenders. The formulated resin contains 0.1-0.5% of Nano additives and the product composed from 5-10 % of Glass fabric, between 10 to 20 % of ordinary glass, and between 60-80 % of the product is the Nano particles dispersed formulated resin, all measured by volume.

  20. Protein-based composite materials

    Directory of Open Access Journals (Sweden)

    Xiao Hu

    2012-05-01

    Full Text Available Protein-based composite biomaterials have been actively pursued as they can encompass a range of physical properties to accommodate a broader spectrum of functional requirements, such as elasticity to support diverse tissues. By optimizing molecular interfaces between structural proteins, useful composite materials can be fabricated as films, gels, particles, and fibers, as well as for electrical and optical devices. Such systems provide analogies to more traditional synthetic polymers yet with expanded utility due to the material's tunability, mechanical properties, degradability, biocompatibility, and functionalization, such as for drug delivery, biosensors, and tissue regeneration.

  1. Creep of fibrous composite materials

    DEFF Research Database (Denmark)

    Lilholt, Hans

    1985-01-01

    Models are presented for the creep behaviour of fibrous composite materials with aligned fibres. The models comprise both cases where the fibres remain rigid in a creeping matrix and cases where the fibres are creeping in a creeping matrix. The treatment allows for several contributions to the cr......Models are presented for the creep behaviour of fibrous composite materials with aligned fibres. The models comprise both cases where the fibres remain rigid in a creeping matrix and cases where the fibres are creeping in a creeping matrix. The treatment allows for several contributions...... such as Ni + W-fibres, high temperature materials such as Ni + Ni3Al + Cr3C2-fibres, and medium temperature materials such as Al + SiC-fibres. For the first two systems reasonable consistency is found for the models and the experiments, while for the third system too many unquantified parameters exist...

  2. Lithium-doped hydroxyapatite nano-composites: Synthesis, characterization, gamma attenuation coefficient and dielectric properties

    Science.gov (United States)

    Badran, H.; Yahia, I. S.; Hamdy, Mohamed S.; Awwad, N. S.

    2017-01-01

    Lithium-hydroxyapatite (0, 1, 5, 10, 20, 30 and 40 wt% Li-HAp) nano-composites were synthesized by sol-gel technique followed by microwave-hydrothermal treatment. The composites were characterized by X-ray diffraction (XRD), Field emission scanning electron microscope (FE-SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared (FTIR) and Raman techniques. Gamma attenuation coefficient and the dielectric properties for all composites were investigated. The crystallinity degree of Li-doped HAp was higher than that of un-doped HAp. Gamma attenuation coefficient values increased from 0.562 cm-1 for 0 wt% Li-HAp to 2.190 cm-1 for 40 wt% Li-HAp. The alternating current conductivity increased with increasing frequency. The concentration of Li affect the values of dielectric constant where Li doped HAp of low dielectric constant can have an advantage for healing in bone fractures. The calcium to phosphorus ratio decreased from 1.43 to 1.37 with the addition of lithium indicating the Ca deficiency in the studied composites. Our findings lead to the conclusion that Li-HAp is a new nano-composite useful for medical applications and could be doped with gamma shield materials.

  3. Electrical properties of NiO/PVC nano hybrid composites for organic field effect transistors

    Science.gov (United States)

    Hayati, A.; Bahari, A.

    2015-01-01

    In this study, NiO/PVC nano hybrid composites have been synthesized through sol-gel method. Nano crystallites phases, crystallinity and electrical properties have been characterized using X-ray diffraction, Fourier transfer infrared radiation, scanning electron microscopy and atomic force microscopy techniques. The dielectric constant of the samples has been calculated through measuring the capacity of samples by application of GPS 132 A. Obtained results have indicated that an NiO/PVC sample with 5 g NiO and 0.02 g PVC, equivalent to 0.4 %wt PVC, in weight synthesis, at a temperature of 80 °C has a higher dielectric constant, better surface morphology, less rough surface, less leakage current, and thus has potential to be suggested as a possible gate dielectric material for future organic field effect transistor devices.

  4. Photocatalytic degradation of phenol with nano-TiO2/zeolite composite material%纳米TiO2/沸石复合材料光催化降解苯酚的性能

    Institute of Scientific and Technical Information of China (English)

    胡小龙; 孙青; 徐春宏; 郑水林

    2016-01-01

    Phenol is a toxic organic pollutants and difficult to treat. Using TiOSO4 as titanium source, urea as the precipitator,and zeolite as the carrier,we had prepared the nano-TiO2/zeolite material by homogeneous precipitation method. The effect of TiO2 loading amount,calcination temperature and the reusabiity on photocatalytic degradation of phenol were investigated by taking phenol as the degradation target. The results showed that the nano-TiO2/zeolite material with 30% TiO2 loaded,and calcined at 650℃ exhibited the best photocatalytic performance. The degradation efficiency of nano-TiO2/zeolite material towards phenol (20mg/L) was 91.6% when irradiated for 3.5h under 300W high pressure mercury lamp and the catalyst after five cycles still demonstrated excellent photocatalytic performance of 85 % of the photocatalytic degradation rate of phenol.%苯酚是一种较难处理的有毒有机污染物。本文以TiOSO4为钛源,尿素为沉淀剂,沸石为载体,采用均匀沉淀法制备了纳米TiO2/沸石复合材料,并以苯酚作为降解对象,研究了不同TiO2负载量、煅烧温度以及重复使用对纳米TiO2/沸石复合材料的光催化降解苯酚性能的影响。结果表明:TiO2负载量为30%、煅烧晶化温度为650℃时,经300W高压汞灯照射3.5h,纳米TiO2/沸石复合材料对20mg/L苯酚溶液的光催化降解率达到91.6%;重复使用5次仍对苯酚溶液具有85%的光催化降解率。

  5. Electrochemical performance of lithium ion battery, nano-silicon-based, disordered carbon composite anodes with different microstructures

    Science.gov (United States)

    Zhang, Xiang-Wu; Patil, Prashanth K.; Wang, Chunsheng; Appleby, A. John; Little, Frank. E.; Cocke, David L.

    Nano-silicon-based disordered carbon composites prepared by mechanical milling and pyrolysis have been examined as anodes of a lithium ion cell. Electrochemical measurements show that the charge-discharge capacity of disordered carbon composites incorporating both silicon-polyparaphenylene (Si-PPP) and silicon-polyvinyl chloride (Si-PVC) with differing silicon contents, decreases with increasing pyrolysis temperature. Si-PVC-based materials have a better cycle life than those based on Si-PPP at the same silicon content.

  6. 3D manufacturing of micro and nano-architected materials

    Science.gov (United States)

    Valdevit, Lorenzo

    2016-04-01

    Reducing mass without sacrificing mechanical integrity and performance is a critical goal in a vast range of applications. Introducing a controlled amount of porosity in a strong and dense material (hence fabricating a cellular solid) is an obvious avenue to weight reduction. The mechanical effectiveness of this strategy, though, depends strongly on the architecture of the resulting cellular material (i.e., the topology of the introduced porosity). Recent progress in additive manufacturing enables fabrication of macro-scale cellular materials (both single-phase and hybrid) with unprecedented dimensional control on the unit-cell and sub-unit-cell features, potentially producing architectures with structural hierarchy from the nano to the macro-scale. As mechanical properties of materials often exhibit beneficial size effects at the nano-scale (e.g., strengthening of metals and toughening of ceramics), these novel manufacturing approaches provide a unique opportunity to translate these beneficial effects to the macro-scale, further improving the mechanical performance of architected materials. The enormous design space for architected materials, and the strong relationship between the topological features of the architecture and the effective physical and mechanical properties of the material at the macro-scale, present both a huge opportunity and an urgent need for the development of suitable optimal design strategies. Here we present a number of strategies for the advanced manufacturing, characterization and optimal design of a variety of lightweight architected materials with unique combinations of mechanical properties (stiffness, strength, damping coefficient…). The urgent need to form strong synergies among the fields of additive manufacturing, topology optimization and architectureproperties relations is emphasized throughout.

  7. Characterization of magnetic nano materials by Moessbauer spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Thakur, Sangeeta; Katyal, S C [Jaypee University of information technology, Waknaghat, Solan 173215 (India); Gupta, A; Reddy, V R [UGC-DAE Consortium for scientific research, Khandwa Road, Indore 452017 (India); Singh, M, E-mail: megha2k6@gmail.co [Department of physics, Himachal Pradesh University, Shimla 171005 (India)

    2010-03-01

    The use of a non-destructive nuclear-physical method, namely {sup 57}Fe Moessbauer spectroscopy, is discussed for the investigation of magnetic and structural arrangement of Fe-based nano-crystalline nickel-zinc-indium ferrites (NZIFO). Nano NZIFO particles (Ni{sub 0.58}Zn{sub 0.42}In{sub x}Fe{sub 2-x}O{sub 4}) with varied quantities of indium (x = 0, 0.1, 0.2) have been chemically synthesized through a reverse micelle reaction and investigated by X-ray diffraction, transmission electron microscopy and by magnetic and Moessbauer spectral studies. Here a comparison between low-temperature and room temperature Moessbauer spectra is presented. Well defined sextets at 5 K provide information about the structure and magnetic states of atoms located in different structural positions. The dependence of Moessbauer parameters, viz, isomer shift, quadrupole splitting, linewidth and hyperfine magnetic field on In{sup 3+} concentration have been discussed. Detailed Moessbauer results, as well as the interest of these materials both for applied science perspectives are presented. Moessbauer results are also supported by magnetization data. With these interesting ferromagnetic properties Indium substituted nano nickel-zinc ferrites have potential applications in magnetic storage data.

  8. Characterization of magnetic nano materials by Mössbauer spectroscopy

    Science.gov (United States)

    Thakur, Sangeeta; Katyal, S. C.; Gupta, A.; Reddy, V. R.; Singh, M.

    2010-03-01

    The use of a non-destructive nuclear-physical method, namely 57Fe Mössbauer spectroscopy, is discussed for the investigation of magnetic and structural arrangement of Fe-based nano-crystalline nickel-zinc-indium ferrites (NZIFO). Nano NZIFO particles (Ni0.58Zn0.42InxFe2-xO4) with varied quantities of indium (x = 0, 0.1, 0.2) have been chemically synthesized through a reverse micelle reaction and investigated by X-ray diffraction, transmission electron microscopy and by magnetic and Mössbauer spectral studies. Here a comparison between low-temperature and room temperature Mössbauer spectra is presented. Well defined sextets at 5 K provide information about the structure and magnetic states of atoms located in different structural positions. The dependence of Mössbauer parameters, viz, isomer shift, quadrupole splitting, linewidth and hyperfine magnetic field on In3+ concentration have been discussed. Detailed Mössbauer results, as well as the interest of these materials both for applied science perspectives are presented. Mössbauer results are also supported by magnetization data. With these interesting ferromagnetic properties Indium substituted nano nickel-zinc ferrites have potential applications in magnetic storage data.

  9. The Enhancement of Wear Properties of Compo-Cast A356 Composites Reinforced with Al2O3 Nano Particulates

    Directory of Open Access Journals (Sweden)

    M.R. Rahimipour

    2014-06-01

    Full Text Available Aluminum matrix nano composites have become of great interest in the lightweight fields because of their high specific stiffness and high specific strength. Many processing techniques have been developed to manufacture metal matrix nano composites on the commercial scale. Compocasting is a relatively new technology for composite forming, different from the conventional composite shaping technologies that use either solid or liquid metals as the starting material. An investigation is carried out on the influence of applied load, sliding speed, wearing surface hardness, reinforcement fracture toughness and morphology as the critical parameters in relation to the wear regime. In general, EMS composites offer superior wear as compared to the SC irrespective of applied load and sliding speed.

  10. Piezoelectric Nanoparticle-Polymer Composite Materials

    Science.gov (United States)

    McCall, William Ray

    Herein we demonstrate that efficient piezoelectric nanoparticle-polymer composite materials can be synthesized and fabricated into complex microstructures using sugar-templating methods or optical printing techniques. Stretchable foams with excellent tunable piezoelectric properties are created by incorporating sugar grains directly into polydimethylsiloxane (PDMS) mixtures containing barium titanate (BaTiO3 -- BTO) nanoparticles and carbon nanotubes (CNTs), followed by removal of the sugar after polymer curing. Porosities and elasticity are tuned by simply adjusting the sugar/polymer mass ratio and the electrical performance of the foams showed a direct relationship between porosity and the piezoelectric outputs. User defined 2D and 3D optically printed piezoelectric microstructures are also fabricated by incorporating BTO nanoparticles into photoliable polymer solutions such as polyethylene glycol diacrylate (PEGDA) and exposing to digital optical masks that can be dynamically altered. Mechanical-to-electrical conversion efficiency of the optically printed composite is enhanced by chemically altering the surface of the BTO nanoparticles with acrylate groups which form direct covalent linkages with the polymer matrix under light exposure. Both of these novel materials should find exciting uses in a variety of applications including energy scavenging platforms, nano- and microelectromechanical systems (NEMS/MEMS), sensors, and acoustic actuators.

  11. Hyper-elastic modeling and mechanical behavior investigation of porous poly-D-L-lactide/nano-hydroxyapatite scaffold material.

    Science.gov (United States)

    Han, Quan Feng; Wang, Ze Wu; Tang, Chak Yin; Chen, Ling; Tsui, Chi Pong; Law, Wing Cheung

    2017-07-01

    Poly-D-L-lactide/nano-hydroxyapatite (PDLLA/nano-HA) can be used as the biological scaffold material in bone tissue engineering as it can be readily made into a porous composite material with excellent performance. However, constitutive modeling for the mechanical response of porous PDLLA/nano-HA under various stress conditions has been very limited so far. In this work, four types of fundamental compressible hyper-elastic constitutive models were introduced for constitutive modeling and investigation of mechanical behaviors of porous PDLLA/nano-HA. Moreover, the unitary expressions of Cauchy stress tensor have been derived for the PDLLA/nano-HA under uniaxial compression (or stretch), biaxial compression (or stretch), pure shear and simple shear load by using the theory of continuum mechanics. The theoretical results determined from the approach based on the Ogden compressible hyper-elastic constitutive model were in good agreement with the experimental data from the uniaxial compression tests. Furthermore, this approach can also be used to predict the mechanical behaviors of the porous PDLLA/nano-HA material under the biaxial compression (or stretch), pure shear and simple shear. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Mechanical Properties of Composite Materials

    Directory of Open Access Journals (Sweden)

    Mitsuhiro Okayasu

    2014-10-01

    Full Text Available An examination has been made of the mechanical and failure properties of several composite materials, such as a short and a long carbon fiber reinforced plastic (short- and long-CFRP and metal based composite material. The short CFRP materials were used for a recycled CFRP which fabricated by the following process: the CFRP, consisting of epoxy resin with carbon fiber, is injected to a rectangular plate cavity after mixing with acrylonitrile butadiene styrene resin with different weight fractions of CFRP. The fatigue and ultimate tensile strength (UTS increased with increasing CFRP content. These correlations, however, break down, especially for tensile strength, as the CFPR content becomes more than 70%. Influence of sample temperature on the bending strength of the long-CFRP was investigated, and it appears that the strength slightly decreases with increasing the temperature, due to the weakness in the matrix. Broken fiber and pull-out or debonding between the fiber and matrix were related to the main failure of the short- and long-CFRP samples. Mechanical properties of metal based composite materials have been also investigated, where fiber-like high hardness CuAl2 structure is formed in aluminum matrix. Excellent mechanical properties were obtained in this alloy, e.g., the higher strength and the higher ductility, compared tothe same alloy without the fiber-like structure. There are strong anisotropic effects on the mechanical properties due to the fiber-like metal composite in a soft Al based matrix.

  13. Nano-Reinforcement of Interfaces in Prepreg-Based Composites Using a Carbon Nanotubes Spraying Method

    KAUST Repository

    Almuhammadi, Khaled

    2012-11-01

    Multi-scale reinforcement of composite materials is a topic a great interest owing to the several advantages provided, e.g. increased stiffness, improved aging resistance, and fracture toughness. It is well known, that the fracture toughness of epoxy resins used as matrix materials for CFRP composites can be increased by the addition of nano-sized fillers such as Carbon nanotubes (CNTs). CNTs are particularly well suited for this purpose because of their nano-scale diameter and high aspect ratio which allow enhancing the contact area and adhesion to the epoxy matrix. On the other hand, CNTs can also be used to improve the interlaminar strength of composite, which is the resistance offered to delamination. Several fabrication techniques have been devised to this purpose, such as powder dispersion [51-53], spraying [54], roll coating [2] and electrospinning [55, 56]. The aim of this work is to extend the knowledge in this field. In particular, MWCNTs were dispersed throughout the interface of a carbon fiber composite laminate ([0o]16) through spraying and the resulting fracture toughness was investigated in detail. To this purpose, Double Cantilever Beam (DCB) specimens were fabricated by placing 0.5 wt.% CNTs at the interface of mid-plane plies and the fracture toughness was determined using the ASTM standard procedures. For comparison, baseline samples were prepared using neat prepregs. In order to corroborate the variation of fracture toughness to the modifications of interfacial damage mechanisms, Scanning Electron Microscopy (SEM) of the failed surfaces was also undertaken. The results of this work have shown that functionalized MWCNTs can enhance the interlaminar fracture toughness; indeed, compared to the neat case, an average increase around 17% was observed. The SEM analysis revealed that the improved fracture toughness was related to the ability of the Nano-reinforcement to spread the damage through crack bridging, i.e. CNTs pull-out and peeling.

  14. Nano-Micro Materials Enabled Thermoelectricity From Window Glasses

    KAUST Repository

    Inayat, Salman Bin

    2012-11-03

    With growing world population and decreasing fossil fuel reserves we need to explore and utilize variety of renewable and clean energy sources to meet the imminent challenge of energy crisis. Solar energy is considered as the leading promising alternate energy source with the pertinent challenge of off sunshine period and uneven worldwide distribution of usable sun light. Although thermoelectricity is considered as a reasonable energy harvester from wasted heat, its mass scale usage is yet to be developed. By transforming window glasses into generators of thermoelectricity, this doctoral work explores engineering aspects of using the temperature gradient between the hot outdoor heated by the sun and the relatively cold indoor of a building for mass scale energy generation. In order to utilize the two counter temperature environments simultaneously, variety of techniques, including: a) insertion of basic metals like copper and nickel wire, b) sputtering of thermoelectric films on side walls of individual glass strips to form the thickness depth of the glass on subsequent curing of the strips, and c) embedding nano-manufactured thermoelectric pillars, have been implemented for innovative integration of thermoelectric materials into window glasses. The practical demonstration of thermoelectric windows has been validated using a finite element model to predict the behavior of thermoelectric window under variety of varying conditions. MEMS based characterization platform has been fabricated for thermoelectric characterization of thin films employing van der Pauw and four probe modules. Enhancement of thermoelectric properties of the nano- manufactured pillars due to nano-structuring, achieved through mechanical alloying of micro-sized thermoelectric powders, has been explored. Modulation of thermoelectric properties of the nano-structured thermoelectric pillars by addition of sulfur to nano-powder matrix has also been investigated in detail. Using the best possible p

  15. Eco-nano composite films containing copper as potential antimicrobial active packaging

    Energy Technology Data Exchange (ETDEWEB)

    Bruna, Julio E.; Gonzalez, Valeska; Rodriguez, Francisco; Guarda, Abel; Galotto, Maria Jose, E-mail: julio.bruna@usach.cl [Center for the Development of Nanoscience and Nanotechnology, Packaging Laboratory, University of Santiago de Chile. Santiago (Chile)

    2011-07-01

    The antimicrobial efficiency of Cellulose Acetate/MMTCu and Chitosan/MMTCu nano composites against Escherichia Coli 0157:H7 n/t has been studied in the present work. The MMT modified with copper were obtained using cation interchange in solution and the nano composites films were prepared using casting solution technique, being the biodegradable polymer (Cellulose Acetate or Chitosan) the main component and the montmorillonite modified with copper, the minority component. Characterization of MMTCu and the nano composites (CA/MMTCu and Ch/MMTCu), were carried out using XRD, AA, TGA, DSC and microbiological analysis. The nano composites showed to be more stable at higher temperature, resulting from the incorporation of MMTCu into the polymer. On the other hand, the results indicated that the antibacterial effect of nano composite increased with the proportion of MMTCu added. (author)

  16. Relative biocompatibility of micro-hybrid and nano-hybrid light-activated composite resins.

    Science.gov (United States)

    Olabisi Arigbede, Abiodun; Folasade Adeyemi, Bukola; Femi-Akinlosotu, Omowumi

    2017-01-01

    Background. In vitro studies have revealed a direct association between resin content and cytotoxicity of composite resins; however, implantation studies in this regard are sparse. This study investigates the relationship between filler content of composite resins and biocompatibility. Methods. This research employed twelve 180‒200-gr male Wistar rats, 1 nano-hybrid (Prime-Dent Inc.) and 1 micro-hybrid (Medental Inc.) composite resins containing 74% and 80‒90% filler content, respectively. The samples were assessed on the 2nd, 14th and 90th day of implantation. Four rats were allocated to each day in this experimental study. A section of 1.5mm long cured nano-hybrid and micro-hybrid materials were implanted into the right and left upper and lower limbs of the rats, respectively. Eight samples were generated on each day of observation. Inflammation was graded according to the criteria suggested by Orstavik and Major. Pearson's chi-squared test was employed to determine the relationship between the tissue responses of the two materials. Statistical significance was set at P composite resins with higher filler content elicited a significantly lower grade of inflammation irrespective of the duration (χ=20.000, df=8, P=0.010) while the composite resins with lower filler content elicited a significantly lower inflammatory response on the 90th day (χ=4.000, df=1, P=0.046). Conclusion. The composite resins with higher filler content generally elicited significantly lower grades of inflammation, and the composite resins with lower filler content exhibited significantly lower inflammatory response on the 90th day of implantation.

  17. The effects of nano-materials on the behaviors of sludge mortar specimens.

    Science.gov (United States)

    Luo, H L; Lin, D F; Kuo, W T

    2004-01-01

    In this research, nano-composites are added to sewage sludge ash to create a mixture, which then replaces part of cement. Nano-composites are manufactured from pure quartzose sand. The influences of different amounts of nano-composites and sludge ash on mortar are evaluated. Cement, sludge ash (0%, 10%, and 20%), and nano-composites (0%, 0.5%, 1%, 2%, and 3%), which defined as the percent weight of cement and sludge ash, are mixed together in batches to make mortar specimens. Results show that the flowability of sludge ash mortar reduces with increasing amount of cement replaced and of nano-composites added. The compressive strength of mortar lowers when more amounts of cement are replaced by sludge ash, but increases with more quantity of nano-composites added. Moreover, the study shows that nano-composites can fortify the compressive strength of mortar. With the help of efficiency of compressive strength, nano-composites benefit most to the mortar with replacement of 10% sludge ash, followed by the substitution of 20% and 0%.

  18. Mechanical and Morphological Properties of Nano Filler Polyester Composites

    Directory of Open Access Journals (Sweden)

    Bonnia Noor Najmi

    2016-01-01

    Full Text Available This research is focusing on mechanical and morphological properties of unsaturated polyester (UP reinforced with two different types of filler which is nano size clay Cloisite 30B (C30B and Carbon Black (CB. Samples were fabricated via hand lay-up and open molding technique. Percentages of Cloisite 30B & Carbon Black (CB used vary from 0, 2, 4, 6, 8 and 10 wt%. The mechanical properties were evaluated by impact, flexural and hardness testing. Result shows that the mechanical strength of C30B was better compare to CB filled composite. The combination of UP with C30B helps to improve the properties due to the high surface area of nanosize filler in the matrix. The result shows that increasing of filler content had increased mechanical properties of composites. Optimum percentage represent good mechanical properties are 4% for both fillers. SEM images showed that rough surface image indicate to agglomeration of filler in the matrix for CB sample and smooth surface image on C30B sample indicate to homogenous blending between filler and matrix polyester. SEM images proved that mechanical properties result indicate that C30B polyester composite is a good reinforcement compare to CB polyester composite.

  19. In vitro study of nano-hydroxyapatite/chitosan–gelatin composites for bio-applications

    Directory of Open Access Journals (Sweden)

    Khaled R. Mohamed

    2014-03-01

    Full Text Available The present work aims to study the in vitro properties of nano-hydroxyapatite/chitosan–gelatin composite materials. In vitro behavior was performed in simulated body fluid (SBF to verify the formation of apatite layer onto the composite surfaces. The in vitro data proved the deposition of calcium and phosphorus ions onto hydroxyapatite /polymeric composite surfaces especially those containing high concentrations of polymer content. The degradation of the composites decreased with increase in the polymeric matrix content and highly decreased in the presence of citric acid (CA, especially these composites which contain 30% polymeric content. The water absorption of the composites increased with increase in the polymeric content and highly increased with CA addition. The Fourier transformed infrared reflectance (FT-IR and scanning electron microscope (SEM for the composites confirmed the formation of bone-like apatite layer on the composite surfaces, especially those containing high content of polymers (30% with 0.2 M of CA. These promising composites have suitable properties for bio-applications such as bone grafting and bone tissue engineering applications in the future.

  20. Poling process optimization of piezo nano composite PZT/polimer

    Science.gov (United States)

    Ridlo, M. Rosyid; Lestari, Titik; Mardiyanto, Oemry, Achiar

    2013-09-01

    The objective of poling process is to make the electric dipole directions to be parallel in the inside perovskite crystal of piezo materials. In simply way, poling was carried out by giving the two sides of a piezo material by highly electrical potential. More parallel of electrical dipoles, it is more strength the piezo characteristics. The optimization involved control of temperature, time depth and the electrical voltage. The samples was prepared by solgel method with precursor tetrabutyl titanat Ti(OC4H9)4, zirconium nitrat Zr(NO3)4ṡ5H2O, Pb(CH3COO)2ṡ3H2O and solution ethylene glycol. Molar ratio Pb:Zr:Ti = 1,1:0,52:0,48 with concidering lossed Pb. Result of solgel process is nano powder PZT. The formed nano powder PZT was then mixed with polimer PVDF and pressed 10 MPa at 150 °C with the size 15 mm in diameter. After poling, piezoelectric constant d33 was measured. The highest d33 = 45 pC/N was found at poling parameters V = 5 kV/ mm, T = 120 °C dan time depth = 1 hours.

  1. Living nano-micro fibrous woven fabric/hydrogel composite scaffolds for heart valve engineering.

    Science.gov (United States)

    Wu, Shaohua; Duan, Bin; Qin, Xiaohong; Butcher, Jonathan T

    2017-01-18

    Regeneration and repair of injured or diseased heart valves remains a clinical challenge. Tissue engineering provides a promising treatment approach to facilitate living heart valve repair and regeneration. Three-dimensional (3D) biomimetic scaffolds that possess heterogeneous and anisotropic features that approximate those of native heart valve tissue are beneficial to the successful in vitro development of tissue engineered heart valves (TEHV). Here we report the development and characterization of a novel composite scaffold consisting of nano- and micro-scale fibrous woven fabrics and 3D hydrogels by using textile techniques combined with bioactive hydrogel formation. Embedded nano-micro fibrous scaffolds within hydrogel enhanced mechanical strength and physical structural anisotropy of the composite scaffold (similar to native aortic valve leaflets) and also reduced its compaction. We determined that the composite scaffolds supported the growth of human aortic valve interstitial cells (HAVIC), balanced the remodeling of heart valve ECM against shrinkage, and maintained better physiological fibroblastic phenotype in both normal and diseased HAVIC over single materials. These fabricated composite scaffolds enable the engineering of a living heart valve graft with improved anisotropic structure and tissue biomechanics important for maintaining valve cell phenotypes.

  2. Single-layer nano-carbon film, diamond film, and diamond/nano-carbon composite film field emission performance comparison

    Science.gov (United States)

    Wang, Xiaoping; Wang, Jinye; Wang, Lijun

    2016-05-01

    A series of single-layer nano-carbon (SNC) films, diamond films, and diamond/nano-carbon (D/NC) composite films have been prepared on the highly doped silicon substrate by using microwave plasma chemical vapor deposition techniques. The films were characterised by scanning electron microscopy, Raman spectroscopy, and field emission I-V measurements. The experimental results indicated that the field emission maximum current density of D/NC composite films is 11.8-17.8 times that of diamond films. And the field emission current density of D/NC composite films is 2.9-5 times that of SNC films at an electric field of 3.0 V/μm. At the same time, the D/NC composite film exhibits the advantage of improved reproducibility and long term stability (both of the nano-carbon film within the D/NC composite cathode and the SNC cathode were prepared under the same experimental conditions). And for the D/NC composite sample, a high current density of 10 mA/cm2 at an electric field of 3.0 V/μm was obtained. Diamond layer can effectively improve the field emission characteristics of nano-carbon film. The reason may be due to the diamond film acts as the electron acceleration layer.

  3. The effect of brushing with toothpaste containing nano calcium carbonate upon nanofill composite resin surface roughness

    Science.gov (United States)

    Ramadhani, A. M.; Herda, E.; Triaminingsih, S.

    2017-08-01

    This study aims to determine the effect of brushing with toothpaste containing nanocalcium carbonate on the roughness of nanofill composite resin surface. Brushing was conducted with 3 types of materials for 3 consecutive brushing periods of 10 minutes each. Surface roughness was measured using a surface-roughness tester and the results were analyzed using the repeated ANOVA and the one-way ANOVA test. The surface morphology was observed using SEM after 3 months’ worth of brushing with the 3 materials. It was found that the nanofill composite resin surface-roughness value increased significantly (p<0.005) after brushing with toothpaste containing nano calcium carbonate for 3 months, but the value was not as high as that obtained when brushing with other types of toothpaste.

  4. 纳米-TiO2/膨胀珍珠岩复合光催化材料的制备与表征%Preparation and Characterization of Nano-TiO2/expanded Perlite Composite Material

    Institute of Scientific and Technical Information of China (English)

    卢芳慧; 桂经亚; 宋兵; 金宝成; 郑水林

    2013-01-01

    以膨胀珍珠岩为载体,采用低温水解工艺制备了负载型纳米-TiO2/膨胀珍珠岩复合光催化材料.应用XRD、SEM、TEM、EDS等现代测试手段对复合材料的结构和性能进行了表征,并在表征和分析基础上从微观上探讨了复合粉体材料的制备机理.结果表明,纳米TiO2能均匀负载于膨胀珍珠岩载体颗粒表面,大小约为8 nm;复合材料对罗丹明B的降解率达95%以上.%Using expanded perlite as the carrier, a kind of composite photocatalyst was prepared by hydrolysis precipitation method. The obtained composite material was characterized by XRD, SEM, TEM. Based on the experimental results and analysis of characterization, the preparation mechanism of composite powder material was studied. The photocatalytic degration experiment of Rhodamine-B indicates that the expanded perlite which can combine with the TiO2 particles tightly is an ideal material to load the photocatalyst. The photocatalytic activity of the composite material is stable and constant.

  5. The Synergistic Effects of the Micro and Nano Particles in Micro-nano Composites on Enhancing the Resistance to Electrical Tree Degradation.

    Science.gov (United States)

    Wang, Wenxuan; Yang, Ying

    2017-08-17

    A new method of increasing the durability and reliability of polymer dielectrics has been proposed by designing a composite structure of the micro and nano particles. The synergistic effects of the micro particles and nano particles are found to enhance the resistance to electrical tree and extend the lifetime of polymer dielectrics for insulations. Epoxy loaded with the micro and nano SiO2 particles at different concentrations are prepared as micro-nano composites. The micro particles show the blocking effects on the electrical tree channel and the interfaces of the nano particles lead to the inhibiting effects on the tree inception and propagation. The lifetime of the micro-nano composite samples in the experiments extends to 4 times of the neat epoxy. The new type of micro-nano composites can be widely applied in future electronic and electrical energy areas.

  6. Nanomanufacturing : nano-structured materials made layer-by-layer.

    Energy Technology Data Exchange (ETDEWEB)

    Cox, James V.; Cheng, Shengfeng; Grest, Gary Stephen; Tjiptowidjojo, Kristianto (University of New Mexico); Reedy, Earl David, Jr.; Fan, Hongyou; Schunk, Peter Randall; Chandross, Michael Evan; Roberts, Scott A.

    2011-10-01

    Large-scale, high-throughput production of nano-structured materials (i.e. nanomanufacturing) is a strategic area in manufacturing, with markets projected to exceed $1T by 2015. Nanomanufacturing is still in its infancy; process/product developments are costly and only touch on potential opportunities enabled by growing nanoscience discoveries. The greatest promise for high-volume manufacturing lies in age-old coating and imprinting operations. For materials with tailored nm-scale structure, imprinting/embossing must be achieved at high speeds (roll-to-roll) and/or over large areas (batch operation) with feature sizes less than 100 nm. Dispersion coatings with nanoparticles can also tailor structure through self- or directed-assembly. Layering films structured with these processes have tremendous potential for efficient manufacturing of microelectronics, photovoltaics and other topical nano-structured devices. This project is designed to perform the requisite R and D to bring Sandia's technology base in computational mechanics to bear on this scale-up problem. Project focus is enforced by addressing a promising imprinting process currently being commercialized.

  7. An examination of the potential for nano-composites in the formulation of HV cable insulation

    Science.gov (United States)

    Roy, Mihir

    In order to find an appropriate cable dielectric material, nanodielectrics consisting of silica particles in cross-linked polyethylene (XLPE) have been formulated using melt-mixing. Various types of chemical modifications were provided to the surface of the nanoparticles in order to understand the mechanism of the particle-polymer interface and to tailor the properties of overall composites. The particulates and the composites formulated have been characterized utilizing several techniques such as electron paramagnetic resonance, Fourier transformed infra-red spectroscopy, x-ray photoelectron spectroscopy, nuclear magnetic resonance, and microscopy. These nanomaterials were examined for their electrical attributes, and substantial improvement in electrical voltage endurance was demonstrated. In addition significant improvements in electric strength were measured and other physical properties important to the processing and application of cable dielectrics were not sacrificed. It was established that the interfacial charge build-up that is a common feature of micro-filled material is absent in nanodielectrics, and there was also a reduction in over all permittivity of the nanocomposite below that of the base resin. To understand the mechanism involved in the improvement in the dielectric properties, the chemistry and physics of the particle-polymer interface was crucial. Therefore, some electrical characterizations of the composite materials were performed to find the trap-site separation, trap depth, mobility of the charge carriers, threshold field for internal charge accumulations etc. The chain scission mechanism proposed by Artbauer via free volume theory was extended to the interfacial defects in the composites; the size of such defects being significantly different for the nano- versus micro-composites. The defects resulted in a microcomposite with very low electric strength, and mitigation of the defects via chemical linkage between particle and polymer

  8. Microstructure of Al2O3/SiO2 ceramic core nano-composites

    Institute of Scientific and Technical Information of China (English)

    赵红亮; 翁康荣; 关绍康; 楼琅洪; 李英敖; 赵惠田; 胡壮麒

    2004-01-01

    Al2O3/SiO2 ceramic core nano-composites were prepared and their microstructure was investigated by transmission electron microscope(TEM). The results show that intergranular nano-composites are achieved. The bonding between Al2O3 and SiO2 particles is well and the interface is even. Amorphous phases and nano crystals appear in the Al2O3/SiO2 ceramic core nano-composites, which both come into being during the cooling process after sintering. Glass phase does not appear between the Al2O3 and SiO2 particles and only appears among the Al2O3 particles, which can be explained with stress model. The quantity of the glass phase is not much and its influence on the high-temperature deformation of the ceramic core nano-composites is little.

  9. Multifunctional nano-hydroxyapatite and alginate/gelatin based sticky gel composites for potential bone regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Yurong; Yu, Juhong [The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, National Engineering Lab of Textile Fiber Materials & Processing Technology, College of Materials and Textile, Zhejiang Sci-Tech University, Hangzhou 310018 (China); Kundu, Subhas C. [Department of Biotechnology, Indian Institute of Technology (IIT) Kharagpur, West Bengal 721302 (India); Institute of Tissue Regeneration Engineering (ITREN), Dankook University, Cheonan 330-714 (Korea, Republic of); Yao, Juming, E-mail: yaoj@zstu.edu.cn [The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, National Engineering Lab of Textile Fiber Materials & Processing Technology, College of Materials and Textile, Zhejiang Sci-Tech University, Hangzhou 310018 (China)

    2016-09-15

    To improve the fixations of the implant and implant-bone integration after joint arthroplasty from locally preventing inflammation and promoting the bone regeneration, we design a multifunctional biomaterial consisting of recombinant human bone morphogenetic protein 2 (rhBMP-2) and antibiotic loaded nano-hydroxyapatite with an alginate/gelatin sticky gel. We investigate its role for the prevention of the inflammation and possibility of inducing a new bone growth along with its adhesive ability. The stickiness exists in the composite, which may help to fix itself on the bone fracture surface. The composite sustains the antibacterial effect and promotes the proliferation and differentiation of MG63 cells in vitro. In vivo experimentation also shows that the composite gel has a role for the reduction of inflammation. It enhances the formation of new bone and blood vessels compared to both the sole rhBMP-2 and non-rhBMP-2/antibiotic loaded composite gels. The multifunctional composite provides a promising material for the prosthetic and bone tissue regeneration. - Highlights: • Multifunctional nanohydroxyapatite composite is fabricated. • The composite consists of nHAP, growth factor, antibiotic and alginate/gelatin gel. • The composite shows antibacterial effect and good cytocompatibility. • No adverse effect to the cells tested in vitro and in vivo.

  10. Nano-Enabled Technologies for Naval Aviation Applications

    Science.gov (United States)

    2015-06-05

    Higher powder density 3. Improved conduction path 4. High energy density Electric driven vehicle Positive Thermal Coefficient of...Cost competiveness with polypropylene 1. Increased thermal , mechanical, electrical properties 2. Increased energy density with better duty...silver filled epoxies, improved thermally conductive adhesives, nano-wires, nano-springs, nano-composites, nano- thermal interface materials and nano

  11. Study on preparation of SnO2-TiO2/Nano-graphite composite anode and electro-catalytic degradation of ceftriaxone sodium.

    Science.gov (United States)

    Guo, Xiaolei; Wan, Jiafeng; Yu, Xiujuan; Lin, Yuhui

    2016-12-01

    In order to improve the electro-catalytic activity and catalytic reaction rate of graphite-like material, Tin dioxide-Titanium dioxide/Nano-graphite (SnO2-TiO2/Nano-G) composite was synthesized by a sol-gel method and SnO2-TiO2/Nano-G electrode was prepared in hot-press approach. The composite was characterized by X-ray photoelectron spectroscopy, fourier transform infrared, Raman, N2 adsorption-desorption, scanning electrons microscopy, transmission electron microscopy and X-ray diffraction. The electrochemical performance of the SnO2-TiO2/Nano-G anode electrode was investigated via cyclic voltammetry and electrochemical impedance spectroscopy. The electro-catalytic performance was evaluated by the degradation of ceftriaxone sodium and the yield of ·OH radicals in the reaction system. The results demonstrated that TiO2, SnO2 and Nano-G were composited successfully, and TiO2 and SnO2 particles dispersed on the surface and interlamination of the Nano-G uniformly. The specific surface area of SnO2 modified anode was higher than that of TiO2/Nano-G anode and the degradation rate of ceftriaxone sodium within 120 min on SnO2-TiO2/Nano-G electrode was 98.7% at applied bias of 2.0 V. The highly efficient electro-chemical property of SnO2-TiO2/Nano-G electrode was attributed to the admirable conductive property of the Nano-G and SnO2-TiO2/Nano-G electrode. Moreover, the contribution of reactive species ·OH was detected, indicating the considerable electro-catalytic activity of SnO2-TiO2/Nano-G electrode.

  12. Nano-composite of silk fibroin-chitosan/Nano ZrO2 for tissue engineering applications: fabrication and morphology.

    Science.gov (United States)

    Teimouri, Abbas; Ebrahimi, Raheleh; Emadi, Rahmatollah; Beni, Batool Hashemi; Chermahini, Alireza Najafi

    2015-05-01

    A scaffold possessing certain desired features such as biodegradation, biocompatibility, and porous structure could serve as a template for tissue engineering. In the present study, silk fibroin (SF), chitosan (CS) and zirconia (Nano ZrO2) were all combined using the freeze drying technique to fabricate a bio-composite scaffold. The composite scaffold (SF/CS/Nano ZrO2) was characterized by SEM, XRD, TGA, BET and FT-IR studies. The scaffold was found to possess a porous nature with pore dimensions suitable for cell infiltration and colonization. The presence of zirconia in the SF/CS/Nano ZrO2 scaffold led to an increase in compressive strength and water uptake capacity while at the same time decreasing the porosity. Cytocompatibility of the SF/CS/Nano ZrO2 scaffold, assessed by MTT assay, revealed non-toxicity to the Human Gingival Fibroblast (HGF, NCBI: C-131). Thus, we suggest that SF/CS/Nano ZrO2 composite scaffold is a potential candidate to be used for tissue engineering.

  13. MICROSTRUCTURE AND WEAR PROPERTIES OF ZIRCONIUM NANO METAL MATRIX COMPOSITES

    OpenAIRE

    Rishav Kumar*, RamachandraNaik AL, Sameer Ahamed, Nitish Kumar Chaubey, Prof.Girish K.B

    2016-01-01

    A356.1 Aluminium alloy reinforced with Nano-sized ZrO2 particle are widely used for high performance applications such as automotive, military, aerospace, and electric  industries because of their improved physical and mechanical properties. In this research, Zirconium Oxide (ZrO2) Nano particle were synthesized by Solution Combustion Synthesis process. Prepared Nano particles were characterized by Powder X-ray diffraction (PXRD). Nano sized Zirconium Particle were reinforced with A356.1...

  14. Ultrashort laser pulse cell manipulation using nano- and micro- materials

    Science.gov (United States)

    Schomaker, Markus; Killian, Doreen; Willenbrock, Saskia; Diebold, Eric; Mazur, Eric; Bintig, Willem; Ngezahayo, Anaclet; Nolte, Ingo; Murua Escobar, Hugo; Junghanß, Christian; Lubatschowski, Holger; Heisterkamp, Alexander

    2010-08-01

    The delivery of extra cellular molecules into cells is essential for cell manipulation. For this purpose genetic materials (DNA/RNA) or proteins have to overcome the impermeable cell membrane. To increase the delivery efficiency and cell viability of common methods different nano- and micro material based approaches were applied. To manipulate the cells, the membrane is in contact with the biocompatible material. Due to a field enhancement of the laser light at the material and the resulting effect the cell membrane gets perforated and extracellular molecules can diffuse into the cytoplasm. Membrane impermeable dyes, fluorescent labelled siRNA, as well as plasmid vectors encoded for GFP expression were used as an indicator for successful perforation or transfection, respectively. Dependent on the used material, perforation efficiencies over 90 % with a cell viability of about 80 % can be achieved. Additionally, we observed similar efficiencies for siRNA transfection. Due to the larger molecule size and the essential transport of the DNA into the nucleus cells are more difficult to transfect with GFP plasmid vectors. Proof of principle experiments show promising and adequate efficiencies by applying micro materials for plasmid vector transfection. For all methods a weakly focused fs laser beam is used to enable a high manipulation throughput for adherent and suspension cells. Furthermore, with these alternative optical manipulation methods it is possible to perforate the membrane of sensitive cell types such as primary and stem cells with a high viability.

  15. Evaluation of the novel three-dimensional porous poly (L-lactic acid)/nano-hydroxyapatite composite scaffold.

    Science.gov (United States)

    Huang, Jianghong; Xiong, Jianyi; Liu, Jianquan; Zhu, Weimin; Chen, Jielin; Duan, Li; Zhang, Jufeng; Wang, Daping

    2015-01-01

    To determine the optimal ratio of nano-hydroxyapatite (n-HA) to polylactic acid (PLLA) in the novel three-dimensional porous PLLA/n-HA composite scaffolds, low-temperature rapid prototyping technology was employed to fabricate the composite materials with different n-HA contents. Mechanical properties and degradation behaviors of the composites were examined, and the scaffold microstructure and n-HA dispersion were observed by scanning electron microscope (SEM). Mechanical tests demonstrated that the tensile strength of the composite material gradually decreased with an increase in n-HA content. When the n-HA content reached 20 wt%, the bending strength of the composite material peaked at 138.5 MPa. SEM images demonstrated that the optimal content of n-HA was 20 wt% as the largest interconnected pore size that can be seen, with a porosity as high as 80%. In vitro degradation experiments demonstrated that the pH value of the material containing solution gradually decreased in a time-dependent manner, with a simultaneous weakening of the mechanical properties. In vitro study using rat osteoblast cells showed that the composite scaffolds were biocompatible; the 20 wt% n-HA scaffold offered particular improvement to rat osteoblast cell adhesion and proliferation compared to other compositions. It was therefore concluded that 20 wt% n-HA is the optimal nano-hydroxyapatite (n-HA) to polylactic acid (PLLA) ratio, with promise for bone tissue engineering.

  16. The heat science of the nano-porous materials; La thermique des materiaux nanoporeux

    Energy Technology Data Exchange (ETDEWEB)

    Volz, S. [CNRS, Lab. d' Energetique Moleculaire et Macroscopique, Combustion, 92 - Chatenay Malabry (France); Quintard, M. [CNRS, Institut de Mecanique des Fluides, 31 - Toulouse (France); Rochais, D. [CEA Centre d' Etudes du Ripault, Lab. Microstructures et Comportements, 37 - Tours (France); Enguehard, F. [CEA Centre d' Etudes du Ripault, Lab. Ingenierie des Materiaux Optiques, 37 - Tours (France); Domingues, G. [Ecole Nationale Superieure de Mecanique et d' Aerotechnique (ENSMA), Lab. d' Etudes Thermiques, 86 - Poitiers (France); Quenard, D. [CSTB, Div. Caracterisation Physique des Materiaux, 38 - Grenoble (France); Rigacci, A. [Ecole des Mines de Paris, Centre Energetique et Procedes, 75 - Paris (France); Bourdin, V. [CNRS, Lab. d' Informatique pour la Mecanique et les Sciences pour l' Ingenieur, 91 - Orsay (France); Chantrenne, P. [Centre de Thermique de Lyon, INSA, 69 - Lyon (France)

    2005-07-01

    In this work are gathered the transparencies of the lecture presented at the conference 'the heat science of the nano-porous materials'. The titles of the different lectures are: 1)modelling of the transfers in nano-porous media 2)modelling of the transfers inside nano-porous super-insulators part I: conduction part II: radiation 3)heat transfers between two silicon oxide nano-crystallite 4)thermo-physical properties of two pyro-micro-nano-porous silicon oxides: humidity and temperature effect 5)adsorption kinetics by a thermal frequency method: an indirect measurement method of the effective conductivity of the granulated adsorbents 6)the aerogels materials: nano-structured thermal super-insulators 7)anticipation of the nano-structured silicon thermal conductivity. (O.M.)

  17. Effects of material morphology on the phototoxicity of nano-TiO2 to bacteria.

    Science.gov (United States)

    Tong, Tiezheng; Shereef, Anas; Wu, Jinsong; Binh, Chu Thi Thanh; Kelly, John J; Gaillard, Jean-François; Gray, Kimberly A

    2013-01-01

    Nanostructured titania (nano-TiO2) is produced in diverse shapes, but it remains largely unknown how tuning the morphology of nano-TiO2 may alter its toxicity. Herein, we show that material morphology plays a critical role in regulating the phototoxicity of nano-TiO2 to bacteria. Low-dimensional nano-TiO2, including nanotubes, nanorods, and nanosheets, were synthesized hydrothermally, and their effects on the bacterial viability of Escherichia coli and Aeromonas hydrophila were compared to spherical nanostructures (anatase nanospheres and P25). Results reveal that TiO2 nanotubes and nanosheets are less phototoxic than their rod- and sphere-shape counterparts under simulated solar irradiation. None of the tested nano-TiO2 shows toxicity in the dark. In contrast to their diminished phototoxicity, however, TiO2 nanotubes and nanosheets exhibit comparable or even higher photoactivity than other nanostructures. Observations by scanning transmission electron microscopy suggest that material morphology influences nano-TiO2 phototoxicity by governing how nano-TiO2 particles align at the bacterial cell surface. Overall, when comparing materials with different morphologies and dimensionality, nano-TiO2 phototoxicity is not a simple function of photocatalytic reactivity or ROS production. Instead, we propose that the evaluation of nano-TiO2 phototoxicity encompasses a three-pronged approach, involving the intrinsic photoactivity, aggregation of nano-TiO2, and the nano-TiO2/bacteria surface interactions.

  18. Preparation and electrochemical properties of graphene/nano-sulfur composite as cathode materials for lithium-sulfur batteries%锂硫电池石墨烯/纳米硫复合正极材料的制备及电化学性能

    Institute of Scientific and Technical Information of China (English)

    杨蓉; 王黎晴; 吕梦妮; 邓坤发; 燕映霖; 任冰; 李兰

    2016-01-01

    A graphene/nano-sulfur (RGO/nano-S) cathode composites was prepared by chemical precipitation of nano-sulfur onto graphene sheets, which were synthesized by pyrolyzing reduction of graphene oxide from Hummers method. The microscopic structure and morphology of the composites were characterized by FT-IR, XRD, SEM, TEM and Raman, while the electrochemical properties were studied by galvanostatic charge-discharge measurements, cyclic voltammetry and electrochemical impedance spectroscopy. The results showed that wrinkled surface on the thermally reduced graphene created a space to accommodate sulfur and polysulfur ions, which helped to hinder dissolving of active cathode materials and suppress migration of polysulfide ions. A homogeneous distribution of nano-sulfur in the graphene conductive network significantly enhanced the effective contact with electrolyte and increased electrochemical reaction area, so that improved discharge capacity and cycle-life performance of the lithium-sulfur batteries.%利用热解还原将Hummers法制得的氧化石墨烯还原为石墨烯,并采用化学沉淀法将纳米硫成功负载到石墨烯片层上,获得石墨烯/纳米硫(RGO/nano-S)正极复合材料。利用 FT-IR、XRD、SEM、TEM和Raman对所制备复合材料的微观结构、形貌等进行表征,采用恒流充放电、循环伏安法和交流阻抗法对复合材料的电化学性能进行研究。研究结果表明,热还原所得石墨烯褶皱的表面形成容纳硫及多硫离子的空间,有助于缓解活性物质溶解和抑制多硫离子迁移;同时,均匀分布的纳米硫能更好地与电解液接触,在石墨烯的导电网络上增大了电化学反应面积,进而改善了该材料作为锂硫电池的实际放比电容量和倍率循环性能。

  19. Study on Properties of PP/Nano-CaCO3 Composite%PP/Nano-CaCO3复合材料性能的研究

    Institute of Scientific and Technical Information of China (English)

    高岩磊; 陈慧; 郧海丽; 崔文广

    2012-01-01

    PP/nano-CaCO3 composite was prepared by melt blending PP with nano-CaCO3. The effect of the nano-CaCO3 content on mechanical property of the PP/nano-CaC03 composite was studied. The dispersion of the nano-CaCO3 in PP matrix was analyzed by SEM. The results show that: with the increase of content of nano-CaCO3, the impact strength and the tensile strength of the PP/nano-CaCO3 composite both increase firstly and then decrease, but the flexural modulus of the PP/nano-CaCO3 composite increase evidently. The dispersion of the nano-CaCO3 in PP matrix gradually becomes bad with the increase of the content of nano-CaCO3.%采用熔融共混法制备出了聚丙烯(PP)/纳米碳酸钙(nano-CaCO3)复合材料,研究了nano-CaCO3的加入量对复合材料力学性能的影响,利用扫描电镜(SEM)分析了nano-CaCO3在PP基体中的分散性.结果表明:随着nano-CaCO3用量的增加,PP/nano-CaCO3复合材料的冲击强度和拉伸强度均呈现出先增加后降低的趋势,而弯曲模量呈增加趋势;随着填加最的增加,nano-CaCO3在PP基体中的分散性逐渐变差.

  20. Preparation and enhanced electrochemical properties of nano-sulfur/poly(pyrrole-co-aniline) cathode material for lithium/sulfur batteries

    Energy Technology Data Exchange (ETDEWEB)

    Qiu Linlin [School of Materials Science and Engineering, Beihang University, Xueyuan Road, Haidian District, Beijing 100083 (China); Zhang Shichao, E-mail: csc@buaa.edu.c [School of Materials Science and Engineering, Beihang University, Xueyuan Road, Haidian District, Beijing 100083 (China); Zhang Lan; Sun, Mingming [School of Materials Science and Engineering, Beihang University, Xueyuan Road, Haidian District, Beijing 100083 (China); Wang Weikun [Military Power Sources Research and Development Center, Chemical Defense Institute, Beijing 100083 (China)

    2010-06-01

    Poly(pyrrole-co-aniline) (PPyA) copolymer nanofibers were prepared by chemical oxidation method with cetyltrimethyl ammonium chloride (CTAC) as template, and the nano-sulfur/poly(pyrrole-co-aniline) (S/PPyA) composite material in lithium batteries was achieved via co-heating the mixture of PPyA and sublimed sulfur at 160 deg. C for 24 h. The component and structure of the materials were characterized by FTIR, Raman, XRD, and SEM. PPyA with nanofiber network structure was employed as a conductive matrix, adsorbing agent and firm reaction chamber for the sulfur cathode materials. The nano-dispersed composite exhibited a specific capacity up to 1285 mAh g{sup -1} in the initial cycle and remained 866 mAh g{sup -1} after 40 cycles.

  1. Preliminary characterization in the development of the nano composite low density polyethylene with attapulgite clay; Caracterizacao preliminar no desenvolvimento de nanocompositos polietileno de baixa densidade/argila atapulgita

    Energy Technology Data Exchange (ETDEWEB)

    Domingos, Luanda G.; Rego, Jose K.M.A. do [Universidade Federal do Rio Grande do Norte, Programa de Pos-graduacao em Ciencia e Engenharia de Materiais, PPGCEM/UFRN, Natal, RN (Brazil); Ito, Edson N. [Universidade Federal do Rio Grande do Norte, Depto de Engenharia de Materiais, DEMat/UFRN, Natal, RN(Brazil); Acchar, Wilson [Universidade Federal do Rio Grande do Norte, Depto de Fisica, DF/UFRN, Natal, RN (Brazil)

    2011-07-01

    The aim of this study was a preliminary study of the physical, thermal and rheological properties of the materials to be used in the development of nano composite low density polyethylene (LDPE) with Brazilian attapulgite clay (ATP), with and without the use of a compatibilizing agent interfacial, polyethylene grafted with maleic anhydride (PE-g-MAH). The materials were characterized by X-ray diffraction (XRD), thermogravimetry (TG) and torque rheometry. The materials were characterized and potentially could be developed polymeric nano composites with technological applications using attapulgite fibers in the nanometer scale. (author)

  2. Positron Annihilation Study on Nickel and Iron Nano-Particles in Natural Rubber Composites

    Directory of Open Access Journals (Sweden)

    Emad H. Aly

    2011-01-01

    Full Text Available Problem statement: The effect of Ni and Fe nano-particles as a filler on the free volume properties Of Natural Rubber (NR was studied using Positron Annihilation Lifetime Spectroscopy (PALS. Approach: The PAL measurements revealed that the free volume properties are strongly affected by the amount and type of filler. Results: Particularly speaking, the free volume fraction dramatically decreased by increasing the filler content. Besides, the addition of nano-prticles created new positron trapping sites at filler-rubber interfaces. Furthermore, correlations were made between the free volume hole sizes (Vh and each of the mechanical and electrical properties successively. A negative correlation was observed between Vh and hardness in the Ni-rubber composites while a positive counterpart was found in the case of Fe-rubber composites. Finally, the polarity of the fillers, being higher than that of the rubber itself, leads to an increase in electrical parameters and an inhibition of o-Ps formation. Conclusion: These results indicate that the investigated composites are considered to be insulating materials as their conductivity values are in the order of an insulator range.

  3. Effect of different polishing systems on the surface roughness of nano-hybrid composites

    Directory of Open Access Journals (Sweden)

    Brijesh Patel

    2016-01-01

    Full Text Available Objective: The study aimed to investigate the influence of different polishing systems on the surface roughness of nano-hybrid composite resins. Background: Different shapes of polishing systems are available according to the site of work. To minimize variability, a new system with single shape is developed that can be utilized in both anterior as well as posterior teeth. Materials and Methods: Seventy composite discs were fabricated using Teflon well (10 mm × 3 mm. Two main group of nano-hybrid composite Group I - Filtek Z350 and Group II - Tetric N-Ceram were used (n = 35 for each group. Both groups were further divided into four subgroups. Subgroup a - OneGloss (n = 10, Subgroup b - PoGo (n = 10, Subgroup c - Sof-Lex spiral (n = 10, Subgroup d - Mylar strip (control, n = 5. Samples were polished according to the manufacturer′s recommendations. Surface roughness test was performed using contact profilometer. The obtained data were analyzed using the one-way analysis of variance test. Result: Tetric N-Ceram produced smoother surfaces than Filtek Z350 (P < 0.05. Mylar strip and "PoGo" created equally smooth surfaces, while significantly rougher surfaces were obtained after applications of "Sof-Lex spiral" and "OneGloss" (P < 0.05. Conclusion: Polishing ability of Tetric N-Ceram is better than Filtek Z350 XT. "PoGo" seems to be a better polishing system than "OneGloss" and "Sof-Lex Spiral."

  4. Impact of Wettability on Fracturing of Nano-Granular Materials

    Science.gov (United States)

    Trojer, M.; Juanes, R.

    2014-12-01

    Hydraulic fracturing, or fracking, is a well-known reservoir stimulation technique, by which the permeability of the near-wellbore region is enhanced through the creation of tensile fractures within the rock, formed in the direction perpendicular to the least principal stress. While it is well known that fracturing of granular media strongly depends on the type of media, the pore fluids, and the fracking fluids, the interplay between multiphase flow, wettability and fracture mechanics of shale-like (nano-granular) materials remains poorly understood. Here, we study experimentally the dynamics of multiphase-flow fracking in nano-porous media and its dependence on the wetting properties of the system. The experiments consist in saturating a thin bed of glass beads with a viscous fluid, injecting a less viscous fluid, and imaging the invasion morphology. We investigate three control parameters: the injection rate of the less-viscous invading phase, the confining stress, and the contact angle, which we control by altering the surface chemistry of the beads and the Hele-Shaw cell. We quantify the dynamic fracture pattern by means of particle image velocimetry (PIV), and elucidate the role of wettability on the emerging flow physics at the length scale of the viscous-frictional instability.

  5. Nano-droplet ejection and nucleation of materials submitted to non-thermal plasma filaments

    Science.gov (United States)

    Borra, J.-P.; Jidenko, N.; Dutouquet, C.; Aguerre, O.; Hou, J.; Weber, A.

    2011-11-01

    Methods to induce non-thermal atmospheric pressure plasma filaments are presented with related properties for micro, streamer and prevented spark discharges, respectively, induced in planar Dielectric Barrier Discharges with one electrode covered by dielectric material (mono-DBD) or point-to-plane Corona. Two mechanisms of nano-particles formation are depicted from aerosol size distributions and TEM analysis. 0.1-10 mJ prevented spark discharges produce 10-100 nm droplets ejected from melted craters as well as nucleated primary particles and subsequent 10-100 nm agglomerates, by nucleation and coagulation in expanding vapor jets. With smaller energy per filament, 0.1-10 μJ micro-discharges and 0.1-100 μJ streamers, the initial local vapor fluxes emitted from spots of interaction between plasma filaments and electrodes are reduced. Subsequent smaller primary particle density limits the local coagulation in the vapor plume since 2-10 nm non-agglomerated crystalline metal nano-particles are produced in mono-DBD with Au, Ag and Cu electrode. Besides, the evolution of the aerosol size from primary nano-particles to agglomerates with transit time suggests slow coagulation of these primary metal particles in mono-DBD. Aerosol properties depend on the energy per filament and on the electrode. The final size is controlled by plasma parameters and transit time in and after the plasma. The aim is to underline emerging applications of atmospheric pressure plasmas for the production of tailored particles with tunable size, composition and structure with non-thermal plasma filaments to control the resulting properties of nano-powders and materials. Production rates and related energetic yields are compared.

  6. Design and micro mechanical properties of nano-SiO2 strengthened composite coatings towards remanufacturing

    Institute of Scientific and Technical Information of China (English)

    WANG Hong-mei; LIU Cun-long; SHI Pei-jing; XU Bin-shi

    2005-01-01

    Nano-SiO2 particles strengthened Ni-based composite coating was designed and prepared on steel substrate. The structures and nanoparticle content of the nano-SiO2/Ni composite coating were determined by SEM,EDS and TEM; and the micro mechanical properties were tested by nano-indentation technique. The results show that 56 % of particles in the solution are dispersed in size of less than 100 nm, the content of nanoparticles co-deposi ted in the coating doubles and structure of the coating is more compact and uniform than that of Ni coating. NanoSiO2/Ni coating exhibits excellent micro mechanical properties, and the nanohardness and elastic modulus are 7.81 GPa and 198 GPa, respectively, which are attributed to finer crystal strengthening, dispersion strengthening and high-density dislocation strengthening of nano-SiO2 particles to the composite coatings.

  7. Nano-engineered composites: interlayer carbon nanotubes effect

    Energy Technology Data Exchange (ETDEWEB)

    Carley, Glaucio, E-mail: carleyone@hotmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil); Geraldo, Viviany; Oliveira, Sergio de [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Fisica; Avila, Antonio Ferreira [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Fisica

    2013-11-01

    The concept of carbon nanotube interlayer was successfully introduced to carbon fiber/epoxy composites. This new hybrid laminated composites was characterized by Raman spectroscopy, X-ray diffraction, scanning electron microscopy and tensile tests. An increase on peak stress close to 85% was witnessed when CNTs interlayer with 206.30 mg was placed to carbon fiber/epoxy laminates. The failure mechanisms are associated to CNTs distribution between and around carbon fibers. These CNTs are also responsible for crack bridging formation and the increase on peak stress. Initial stiffness is strongly affected by the CNT interlayer, however, changes on stiffness is associated to changes on nano/micro-structure due to damage. Three different behaviors can be described, i.e. for interlayers with Almost-Equal-To 60 mg of CNT the failure mode is based on cracks between and around carbon fibers, while for interlayers with CNT contents between 136 mg and 185 mg cracks were spotted on fibers and inside the CNT/matrix mix. Finally, the third failure mechanism is based on carbon fiber breakage, as a strong interface between CNT/matrix mix and carbon fibers is observed. (author)

  8. A Review of Biomedical Composite Materials

    Institute of Scientific and Technical Information of China (English)

    吴珊珊

    2013-01-01

    This article addresses the review of the biomedical composite materials.It introduces the operational definition,the classification of biomedical composite materials,and its constituents within itself.In this thesis,the last part presents the application of this kind of material.By writing this paper,I hope that people will get a comprehensive knowledge of the biomedical composite material and make further and deeper research in this material by which way to animate the material science industry.

  9. Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing nano fibrillar silicate.

    Science.gov (United States)

    Tian, Ming; Gao, Yi; Liu, Yi; Liao, Yiliang; Hedin, Nyle E; Fong, Hao

    2008-02-01

    To investigate the reinforcement of Bis-GMA/TEGDMA dental resins (without conventional glass filler) and composites (with conventional glass filler) with various mass fractions of nano fibrillar silicate (FS). Three dispersion methods were studied to separate the silanized FS as nano-scaled single crystals and uniformly distribute them into dental matrices. The photo-curing behaviors of the Bis-GMA/TEGDMA/FS resins were monitored in situ by RT-NIR to study the photopolymerization rate and the vinyl double bond conversion. Mechanical properties (flexural strength, elastic modulus and work-of-fracture) of the nano FS reinforced resins/composites were tested, and analysis of variance (ANOVA) was used for the statistical analysis of the acquired data. The morphology of nano FS and the representative fracture surfaces of its reinforced resins/composites were examined by SEM/TEM. Impregnation of small mass fractions (1% and 2.5%) of nano FS into Bis-GMA/TEGDMA (50/50 mass ratio) dental resins/composites improved the mechanical properties substantially. Larger mass fraction of impregnation (7.5%), however, did not further improve the mechanical properties (one way ANOVA, P>0.05) and may even reduce the mechanical properties. The high degree of separation and uniform distribution of nano FS into dental resins/composites was a challenge. Impregnation of nano FS into dental resins/composites could result in two opposite effects: a reinforcing effect due to the highly separated and uniformly distributed nano FS single crystals, or a weakening effect due to the formation of FS agglomerates/particles. Uniform distribution of highly separated nano FS single crystals into dental resins/composites could significantly improve the mechanical properties of the resins/composites.

  10. Preparation, bioactivity and mechanism of nano-hydroxyapatite/sodium alginate/chitosan bone repair material.

    Science.gov (United States)

    Liao, Jianguo; Li, Yanqun; Li, Haiyan; Liu, Jingxian; Xie, Yufen; Wang, Jianping; Zhang, Yongxiang

    2017-08-11

    As the major inorganic component of natural bone, nano-hydroxyapatite (n-HA) on its own is limited in its use in bone repair, due to its brittleness. Chitosan (CS) and sodium alginate (SAL) are used to reduce its brittleness and tendency to degradation. However, the compressive strength of the composite is still low, and its biological performance needs further study. Nano-hydroxyapatite/sodium alginate/chitosan (n-HA/SAL/CS) composite was prepared via an in situ synthesis method. Further, we prepared the n-HA/SAL/CS self-setting bone repair material by mixing n-HA/SAL/CS powder with a curing liquid (20 wt.% citric acid). In addition, the in vitro bioactivity and cell cytotoxicity were also explored. Transmission electron microscopy photos revealed that the n-HA crystals were uniformly distributed throughout the polymer matrix. Infrared IR spectroscopy indicated that the HA interacted with the COO- of SAL and NH2- of CS. The compressive strength of the n-HA/SAL/CS bone cement was 34.3 MPa and matched the demands of weight-bearing bones. Soaking in vitro in simulated body fluid demonstrated that the composite material had reasonably good bioactivity, while cytotoxicity tests indicated that the n-HA/SAL/CS cement could promote cell proliferation and was biocompatible. Compressive strength of n-HA/SAL/CS can satisfy the needs of cancellous bone, and in vitro bioactivity and cytotoxicity tests results indicated that the n-HA/SAL/CS composite could act as an optimal bone repair material.

  11. Progress in nano-electro optics characterization of nano-optical materials and optical near-field interactions

    CERN Document Server

    Ohtsu, Motoichi

    2005-01-01

    This volume focuses on the characterization of nano-optical materials and optical-near field interactions. It begins with the techniques for characterizing the magneto-optical Kerr effect and continues with methods to determine structural and optical properties in high-quality quantum wires with high spatial uniformity. Further topics include: near-field luminescence mapping in InGaN/GaN single quantum well structures in order to interpret the recombination mechanism in InGaN-based nano-structures; and theoretical treatment of the optical near field and optical near-field interactions, providing the basis for investigating the signal transport and associated dissipation in nano-optical devices. Taken as a whole, this overview will be a valuable resource for engineers and scientists working in the field of nano-electro-optics.

  12. Zinc Composite Layers, Incorporating Polymeric Nano-aggregates: Surface Analysis and Electrochemical Behavior

    NARCIS (Netherlands)

    Koleva, D.A.; Zhang, X.; Petrov, P.; Boshkov, N.; Van Breugel, K.; De Wit, J.H.W.; Mol, J.M.C.; Tsvetkova, N.

    2008-01-01

    This study reports on a comparative investigation of the corrosion behavior of zinc (Zn) and nano-composite zinc (ZnC) galvanic layers in 5% NaCl solution. The metallic matrix of the ZnC layers incorporates nano-sized, stabilized polymeric aggregates, formed from the amphiphilic tri-block co-polymer

  13. Characterization of nano-composite PVD coatings for wear-resistant applications

    NARCIS (Netherlands)

    Galvan, D.; Pei, Y.T.; de Hosson, J.T.M.; DeHosson, JTM; Brebbia, CA; Nishida, SI

    2005-01-01

    Various methodologies for the characterization of nano-composite coatings are discussed, which consist TiC nano-particles distributed in an amorphous hydrocarbon (a-C:H) matrix. Complications that arise from the influence of coating roughness and underlying substrate on the properties are evaluated

  14. Synthesis and electrochemical performance of nano-metastructured LiFePO4/C cathode material.

    Science.gov (United States)

    Zhi, Xiaoke; Liang, Guangchuan; Wang, Li; Cui, Junyan; Yang, Limei

    2010-11-01

    The nano-metastructured LiFePO4/C composites were synthesized by carbothermal reduction method using starch gel as carbon source and dispersing media to obtain high tap density LiFePO4 with excellent electrochemical performance. The raw materials were coated by starch gel as compact precursors, which was sintered at 750 degrees C for 8 h to obtain high-density LiFePO4/C composite aggregated with nano-sized particles. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations showed that the primary particles had an average size of about 50-80 nm and the aggregates had a homogeneous particle size distribution of about 400 nm. The asprepared samples had a shortened lithium-ion diffusion length but with higher tap density, thus leading to the excellent electrochemical performance of the cathode materials. Electrochemical results showed that the samples delivered high discharge capacities of 155.6 and 120.7 mAh/g at 0.2C and 5C rates, respectively, with excellent cycling performance.

  15. Critical Review of Removal of Nano Materials in Waste Streams

    Science.gov (United States)

    Leung, Solomon W.; Williams, Bradley; De Jesus, Karl; Lai, James C. K.

    2017-05-01

    Industrial applications of nanomaterials (NMs) are rising drastically in recent years and the commercial value of these materials can reach over 100 billion in 5 years. Major effort in nano research has been devoted to the utilities of the materials, only minimum effort has been directed to the disposal, reuse, and recycle of these new forms of materials. Due to their unique sizes and sharps, nanomaterials possess unique characteristics and toxicity that are not expected from their counterparts in meso/micro forms. At the present time, there are no regulations governing the handling and disposals of NMs, but recent research demonstrated that NMs are more hazardous than we realize. A main reason why less caution is being exercised by the general public regarding NMs is that the measurement and quantitation of NMs are difficult, which lead to difficulties in monitoring, thus regulation. This article critically reviewed over the issues stemming from the development of NMs, especially the challenges of measurement and disposal of these materials in landfills.

  16. One-pot synthesis of carbon-coated SnO2 nano-composite using hydrothermal method for lithium ion battery application.

    Science.gov (United States)

    Lee, Hye Rim; Kim, Hwan Jin; Park, Jong Hyeok; Yoon, Dae Ho

    2013-06-01

    Carbon-coated SnO2 nano-composite was synthesized by using a hydrothermal method in a one step process with sizes of 1 to 3 microm. The carbon-coated SnO2 nano-composite was easily obtained by changing firing atmosphere from air to argon (600 degrees C for 3 hours). The carbon-coating thickness and size of the SnO2 nanoparticles in carbon-coated SnO2 nano-composite were confirmed through a high-resolution transmission electron microscopy (HRTEM) as 40 and 5 nm, respectively. Carbon-coating and particle size affect to the capacity retention property. Carbon-coated and non carbon-coated samples were investigated as anode materials. It was confirmed that the non carbon-coated SnO2 nano-composite had a 718 mA h/g initial charge capacity, 91% reached to theoretical value of SnO2 (790 mA h/g), while the carbon-coated SnO2 nano-composite had an excellent capacity retention of 89.6% after 70 cycles (10.88% for non carbon-coated SnO2 nano-composite).

  17. High Temperature Flow Stress Prediction of Nano-Al2O3/Cu Composite Using an Artificial Neural Network

    Institute of Scientific and Technical Information of China (English)

    GAO Jian-xin; XU Xiao-feng; SONG Ke-xing; LI Pei-quan; GUO Xiu-hua; LIU Rui-hua

    2006-01-01

    Alumina dispersion strengthened copper composite (nano-Al2O3/Cu composite) was recently emerged as a kind of potentially viable and attractive engineering material for applications requiring high strength, high thermal and electrical conductivities and resistance to softening at elevated temperatures. The nano-Al2O3/Cu composite was produced by internal oxidation. The microstructures of the composite were analyzed by the TEM and its hot deformation behavior was investigated by means of continuous compression tests performed on a Gleeble 1500 thermo-simulator. Making use of the modified algorithm-Levenberg-Marquardt (L-M) algorithm BP neural network, a model for predicting the flow stresses during hot deformation was set up on the base of the experimental data. Results show that the microstructures of the composite are characterized by uniform distribution of nano-Al2O3 particles in Cu-matrix. The sliding of dislocations is the main deformation mechanism. The dynamic recovery is the main softening mode with the flow stress decreasing gently from 500 ℃ to 850 ℃. The recrystallization of Cu-matrix can be retarded late into as high as 850 ℃, when it happens only partially. The well-trained BP neural network model can accurately describe the influence of the temperature, strain rate, and true strain on the flow stresses, therefore, it can precisely predict the flow stresses of the composite under given deforming conditions and provide a new way to optimize hot deforming process parameters.

  18. Influence of solid contaminants in oil on wear characteristics of nano-Al2O3/Ni composite coating

    Institute of Scientific and Technical Information of China (English)

    杜令忠; 徐滨士; 董世运; 杨华; 吴毅雄

    2004-01-01

    Solid contaminants in lubrication system will cause severe wear of sliding components. In order to improve the wear resistance of the material in oil containing solid contaminants, the brush plated nano-A12 O3/Ni composite coating was prepared and the influence of the sand content and sand size on the tribological property of the coating in oil containing solid contaminants was tested with ball-on-disc tester. The results show that the wear volume increases with increasing the sand content and sand size, and the wear resistance of the composite coating is 20% higher than that of the high-speed plain nickel coating. The main wear mechanisms of the coatings are abrasive wear and adhesive wear. And due to the nano-particle strengthening effect, the wear resistance of the composite coating is improved.

  19. Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength

    Directory of Open Access Journals (Sweden)

    Moluk Aivazi

    2016-12-01

    Full Text Available Ceramic dental materials have been considered as alternatives to metals for dental implants application. In this respect, zirconia tetragonal stabilized with %3 yttrium, is of great importance among the ceramic materials for endosseous dental implant application. Because of its good mechanical properties and color similar to tooth. The aim and novelty of this study was to design and prepare Y-TZP nano-composite to reduce the degradation process at low temperature by alumina addition and maintaining submicron grain sized. Also, flexural strength of nano-composite samples was evaluated. Toward this purpose, alumina-Y-TZP nano-composites containing 0–30 vol% alumina (denoted as A-Y-TZP 0-30 were fabricated using α-alumina and Y-TZP nano-sized by sintering pressure less method. The synthesized samples were characterized using x-ray diffraction, field emission scanning electron microscopy equipped with energy dispersive x-ray spectroscopy techniques. Nano-composite samples with high density (≥96% and grain sized of ≤ 400 nm was obtained by sintering at 1270 °C for 170 min. After low temperature degradation test (LTD, A-Y-TZP20 and A-Y-TZP30 not showed monoclinic phase and the flexural strength in all of samples were higher than A-Y-TZP0. It was concluded that the grains were remained in submicron sized and A-Y-TZP20 and A-Y-TZP30 did not present biaxial strength reduction after LTD test.

  20. Microstructure and mechanical properties of Al-nano ZrO II composites produced by casting route

    Science.gov (United States)

    Karimi, M.; Baharvandi, H. R.; Abdizadeh, H.; Pak Beyrami, B.; Mobarhan Bonab, M. A.

    2007-07-01

    Aluminum metal matrix composites (AMCs) are regarded as candidate materials for aerospace and automotive applications owning to their superior properties, such as high specific modulus specifically at high temperatures, good strength and low wear rates. AMCs have been prepared by liquid metal route such as pressureless infiltration, squeeze casting, stir casting, spray forming, etc. Each of these processes has their own advantages and limitations. The choice of the fabrication techniques is dictated by production cost, process efficiency, the quality desired in the product and their applications. AMCs cast from the liquid state are of interest because of their relatively low processing cost and ease in manufacturing. In the present project, Aluminum A356 and zirconia nano particles were selected as raw materials. Zirconia nano particles were founded to be a promising candidate due to its high hardness, high modulus of elasticity and excellent thermal stability. Samples of composites was made at different amount of zirconia's particles (0, 1.5, 2.5, 5vol %) and temperature of casting were 800, 850 and 950°C. Microstructure of composite specimens was examined using SEM and optical microscopy. Chemical composition was investigated by XRD method. Physical properties such as density and porosity were determined by Archimedes and image analyzing methods. Mechanical properties such as tensile strength, hardness and toughness were determined. The experimental results show that the mechanical properties like tensile strength and hardness markedly improved by adding zirconia nano particles. The maximum was for samples with 5vol% of nano particles were casted at 850°C. Fracture toughness decreased by addition of zirconia nano particles.

  1. Novel 'nano in nano' composites for sustained drug delivery: biodegradable nanoparticles encapsulated into nanofiber non-wovens.

    Science.gov (United States)

    Beck-Broichsitter, Moritz; Thieme, Marcel; Nguyen, Juliane; Schmehl, Thomas; Gessler, Tobias; Seeger, Werner; Agarwal, Seema; Greiner, Andreas; Kissel, Thomas

    2010-12-08

    Novel 'nano in nano' composites consisting of biodegradable polymer nanoparticles incorporated into polymer nanofibers may efficiently modulate drug delivery. This is shown here using a combination of model compound-loaded biodegradable nanoparticles encapsulated in electrospun fibers. The dye coumarin 6 is used as model compound for a drug in order to simulate drug release from loaded poly(lactide-co-glycolide) nanoparticles. Dye release from the nanoparticles occurs immediately in aqueous solution. Dye-loaded nanoparticles which are encapsulated by electrospun polymer nanofibers display a significantly retarded release.

  2. Synthesis, characterization and magnetic behavior of Co/MCM-41 nano-composites

    Energy Technology Data Exchange (ETDEWEB)

    Cuello, N. [CITeQ-Universidad Tecnológica Nacional-Facultad Regional Córdoba, Maestro López esq. Cruz Roja Argentina, 5016 Córdoba (Argentina); Elías, V. [CITeQ-Universidad Tecnológica Nacional-Facultad Regional Córdoba, Maestro López esq. Cruz Roja Argentina, 5016 Córdoba (Argentina); CONICET (Argentina); Crivello, M. [CITeQ-Universidad Tecnológica Nacional-Facultad Regional Córdoba, Maestro López esq. Cruz Roja Argentina, 5016 Córdoba (Argentina); Oliva, M. [FaMAF-Universidad Nacional de Córdoba, Córdoba (Argentina); IFEG-CONICET (Argentina); Eimer, G., E-mail: geimer@scdt.frc.utn.edu.ar [CITeQ-Universidad Tecnológica Nacional-Facultad Regional Córdoba, Maestro López esq. Cruz Roja Argentina, 5016 Córdoba (Argentina); CONICET (Argentina)

    2013-09-15

    Synthesis, structure and magnetic properties of Co/MCM-41 as magnetic nano-composites have been investigated. Mesoporous materials with different degrees of metal loading were prepared by wet impregnation and characterized by ICP, XRD, N{sub 2} adsorption, UV–vis DRS, TPR and EPMA-EDS. Cobalt oxide clusters and Co{sub 3}O{sub 4} nano-particles could be confined inside the mesopores of MCM-41, being this fact favored by the Co loading increasing. In addition, larger crystals of Co{sub 3}O{sub 4} detectable by XRD also grow on the surface when the Co loading is enhanced. The magnetic characterization was performed in a SQUID magnetometer using a maximum magnetic applied field µ{sub 0}Ha=1 T. While the samples with the higher Co loadings showed a behavior typically paramagnetic, a superparamagnetic contribution is more notorious for lower loadings, suggesting high Co species dispersion. - Graphical abstract: Room temperature hysteresis loops as a function of the Co content. Display Omitted - Highlights: • Co species as isolated Co{sup 2+}, oxide clusters and Co{sub 3}O{sub 4} nano-particles were detected. • For higher Co loads were detected, by XRD, Co{sub 3}O{sub 4} particles on the external surface. • The confining of Co species inside the mesopores was achieved by increasing Co load. • Paramagnetism from oxide clusters/nano-particles becomes dominant for higher Co loads. • Superparamagnetism can be assigned to Co species of small size and finely dispersed.

  3. Design and fabrication of microfluidic/microelectronic devices from nano particle based composites

    Science.gov (United States)

    Liu, Liyu

    In this thesis, two kinds of nanoparticle functional composite Giant Electrorheological(GER) fluid and polydimethylsiloxane (PDMS) conductive composites and their applications in micro scales are studied. GER fluid is synthesized with ˜50 nm polarizable solid particles and non-polarizable oil, whose apparent viscosity is continuously variable through applications of an electric field. We have successfully applied ER fluid as actuations in microfluidic chips. With soft lithography techniques, we developed various micro functional chips based on PDMS, including micro flexible platform, micro active mixer and micro pump, all of which have desirable performances. The PDMS conducting composites are synthesized by mixing nano to sub micro-sized conductive particles (silver/carbon black) with PDMS gel. Such composite materials exhibit good electrical conductivity and mechanical reliability, as well as desirable thermal characteristics. By employing this type of composite, we have developed some realistic micro-structural devices and explored their potential applications, including flexible bio-electrodes, micro-heaters and flexible displays, micro temperature indicators, etc. With these two composites and corresponding results, we succeeded in realizing a highly integrated microfluidic chip with the function of DNA amplification. The system has the advantages of small size with a high degree of integration, high PCR efficiency, digital control and simple fabrication at low cost and shows promise for a broad range of applications in chemical synthesis and biological sensing/analysis.

  4. A comparison study of polymer/cobalt ferrite nano-composites synthesized by mechanical alloying route

    Directory of Open Access Journals (Sweden)

    Sedigheh Rashidi

    2015-12-01

    Full Text Available In this research, the effect of different biopolymers such as polyethylene glycol (PEG and polyvinylalcohol (PVA on synthesis and characterization of polymer/cobalt ferrite (CF nano-composites bymechanical alloying method has been systematically investigated. The structural, morphological andmagnetic properties changes during mechanical milling were investigated by X-ray diffraction (XRD,Fourier transform infrared spectroscopy (FTIR, transmission electron microscopy (TEM, fieldemission scanning electron microscopy (FESEM, and vibrating sample magnetometer techniques(VSM, respectively. The polymeric cobalt ferrite nano-composites were obtained by employing atwo-step procedure: the cobalt ferrite of 20 nm mean particle size was first synthesized by mechanicalalloying route and then was embedded in PEG or PVA biopolymer matrix by milling process. Theresults revealed that PEG melted due to the local temperature raise during milling. Despite thisphenomenon, cobalt ferrite nano-particles were entirely embedded in PEG matrix. It seems, PAV is anappropriate candidate for producing nano-composite samples due to its high melting point. InPVA/CF nano-composites, the mean crystallite size and milling induced strain decreased to 13 nm and0.48, respectively. Moreover, milling process resulted in well distribution of CF in PVA matrix eventhough the mean particle size of cobalt ferrite has not been significantly affecetd. FTIR resultconfirmed the attachment of PVA to the surface of nano-particles. Magnetic properties evaluationshowed that saturation magnetization and coercivity values decreased in nano-composite samplecomparing the pure cobalt ferrite.

  5. Preparation and properties of blended graphene oxide-nano SiO2/TPU composites%共混型石墨烯-nano SiO2/TPU复合材料的制备与性能

    Institute of Scientific and Technical Information of China (English)

    蔺海兰; 朱庆兰; 卞军; 周醒; 王正君; 鲁云

    2016-01-01

    采用熔融共混技术制备了氧化石墨烯(GO)-nano SiO2杂化材料填充改性的形状记忆热塑性聚氨酯(GO-nano SiO2/TPU)复合材料,探讨了 GO-nano SiO2杂化材料对复合材料力学性能、熔融指数及形状记忆性能的影响。结果表明:GO-nano SiO2含量对 GO-nano SiO2/TPU 复合材料的力学性能有明显的影响,其含量为0.5 wt%~1 wt%时,GO-nano SiO2/TPU复合材料的综合力学性能较好。熔融指数分析表明,填料的加入会降低材料的加工流动性能。形状记忆性能研究表明,加入 GO-nano SiO2杂化材料使得 GO-nano SiO2/TPU 复合材料的形状固定率先降低后上升,在含量为1 wt%后上升趋势更加明显;而形状回复率随填料含量的增加而呈降低趋势,并且在100℃高温这种变化趋势更加明显和稳定,回复温度越高,形状回复率越好。%Graphene oxide(GO)-nano SiO2 hybrid materials filled modified shape memory thermoplastic polyure-thane (GO-nano SiO2/TPU)composites were prepared through melt blending technology.The effects of GO-nano SiO2 hybrid materials on the mechanical properties,melt index and shape memory properties of composites were in-vestigated.The results show that the content of GO-nano SiO2 has an obvious influence on the mechanical properties of GO-nano SiO2/TPU composites.When the content of GO-nano SiO2 is in the range of 0.5wt%-1wt%,the GO-nano SiO2/TPU composites show the best comprehensive mechanical properties.Melting index analysis indicates that the incorporation of filler decreases the flowability of materials.Shape memory property tests indicate that the shape fixed rate of GO-nano SiO2/TPU composites decreases firstly,and then increases with addition of GO-nano SiO2 hybrid material.Especially the rising trend is more obvious when the filler content is higher than 1 wt%.The shape recovery rate decreases with the increasing of filler content.And this trend is more obvious and stable at 100 ℃ high temperature

  6. Synthesis of Nano-Crystalline Materials in Open-Air Laboratory: A Case Study of Tobacco.

    Science.gov (United States)

    Satpati, Biswarup; Bhattacherjee, Ashis; Roy, Madhusudan

    2015-02-01

    The work deals with synthesis of nano-crystalline materials in open-air laboratory and in-depth investigation of the tobacco sample of one branded cigarette and its ash using high-resolution transmission electron microscopy and associated techniques. It exhibits the presence of nanocrystals and nanorods of various oxides in cigarette ash. The structure, shape, size and composition of these nanocrystals and nanorods are explored. The energy dispersive X-ray spectra from different regions of the tobacco sample and its ash using high-angle annular dark field scanning/transmission electron microscopy mode are utilized to obtain elemental composition and their relative abundances. For a detailed distribution of different elements in the nanorods, elemental mapping using energy-filtered transmission electron microscopy is also presented. The results highlight the conversion of amorphous constituents of tobacco to nanomaterials on combustion at low temperatures, thus mixing up in the atmosphere.

  7. Modeling of nano-reinforced polymer composites: Microstructure effect on Young’s modulus

    DEFF Research Database (Denmark)

    Peng, R.D.; Zhou, H.W.; Wang, H.W.;

    2012-01-01

    A computational numerical-analytical model of nano-reinforced polymer composites is developed taking into account the interface and particle clustering effects. The model was employed to analyze the interrelationships between microstructures and mechanical properties of nanocomposites. An improved...

  8. Composite materials for fusion applications

    Energy Technology Data Exchange (ETDEWEB)

    Jones, R.H.; Henager, C.H. Jr.; Hollenberg, G.W.

    1991-10-01

    Ceramic matrix composites, CMCs, are being considered for advanced first-wall and blanket structural applications because of their high-temperature properties, low neutron activation, low density and low coefficient of expansion coupled with good thermal conductivity and corrosion behavior. This paper presents a review and analysis of the hermetic, thermal conductivity, corrosion, crack growth and radiation damage properties of CMCs. It was concluded that the leak rates of a gaseous coolant into the plasma chamber or tritium out of the blanket could exceed design criteria if matrix microcracking causes existing porosity to become interconnected. Thermal conductivities of unirradiated SiC/SiC and C/SiC materials are about 1/2 to 2/3 that of Type 316 SS whereas the thermal conductivity for C/C composites is seven times larger. The thermal stress figure-of-merit value for CMCs exceeds that of Type 316 SS for a single thermal cycle. SiC/SiC composites are very resistant to corrosion and are expected to be compatible with He or Li coolants if the O{sub 2} concentrations are maintained at the appropriate levels. CMCs exhibit subcritical crack growth at elevated temperatures and the crack velocity is a function of the corrosion conditions. The radiation stability of CMCs will depend on the stability of the fiber, microcracking of the matrix, and the effects of gaseous transmutation products on properties. 23 refs., 14 figs., 1 tab.

  9. Materiomics: biological protein materials, from nano to macro.

    Science.gov (United States)

    Cranford, Steven; Buehler, Markus J

    2010-11-12

    Materiomics is an emerging field of science that provides a basis for multiscale material system characterization, inspired in part by natural, for example, protein-based materials. Here we outline the scope and explain the motivation of the field of materiomics, as well as demonstrate the benefits of a materiomic approach in the understanding of biological and natural materials as well as in the design of de novo materials. We discuss recent studies that exemplify the impact of materiomics - discovering Nature's complexity through a materials science approach that merges concepts of material and structure throughout all scales and incorporates feedback loops that facilitate sensing and resulting structural changes at multiple scales. The development and application of materiomics is illustrated for the specific case of protein-based materials, which constitute the building blocks of a variety of biological systems such as tendon, bone, skin, spider silk, cells, and tissue, as well as natural composite material systems (a combination of protein-based and inorganic constituents) such as nacre and mollusk shells, and other natural multiscale systems such as cellulose-based plant and wood materials. An important trait of these materials is that they display distinctive hierarchical structures across multiple scales, where molecular details are exhibited in macroscale mechanical responses. Protein materials are intriguing examples of materials that balance multiple tasks, representing some of the most sustainable material solutions that integrate structure and function despite severe limitations in the quality and quantity of material building blocks. However, up until now, our attempts to analyze and replicate Nature's materials have been hindered by our lack of fundamental understanding of these materials' intricate hierarchical structures, scale-bridging mechanisms, and complex material components that bestow protein-based materials their unique properties. Recent

  10. Flame Retardant Effects of Nano-Clinoptilolite on AcrylonitrileButadiene-Styrene (ABS Nano-Composite

    Directory of Open Access Journals (Sweden)

    Aboulfazl Barati

    2012-01-01

    Full Text Available In recent years, intumescent technology has found a place in polymer science as a method of providing flame retardance to polymeric materials. On heating, fire-retardant intumescent material restricts the action of the heat flux or flame. The proposed mechanism is based on charred layer acting as physical barrier, which slows down heat and mass transfer between the gas and the condensed phases. In this paper, the flammability of intumescent fire-retardant acrylonitrile-butadiene-styrene (ABS matrix composites consisting of hydromagnesite (HMg as an acid source and blowing agent, pentaerythritol (PER as a carbonisation agent and natural zeolite (clinoptilolite rich, Kansar Shargh as a synergistic agent were examined. The flammability of composites was characterized by limiting oxygen index (LOI measurement and horizontal burning tests. A synergistic effect in flame retardancy was observed when natural zeolites were used in combination with HMg and PER.

  11. Form and Mechanism of N Doped TiO2 Nano-particles-Palygorskite Composite Materials%N掺杂纳米TiO2-凹凸棒土复合材料的N掺杂形式和机理

    Institute of Scientific and Technical Information of China (English)

    宋兵; 郑水林; 刘月; 张羽末; 卢芳慧

    2013-01-01

    N doped TiO2 nano-particles-palygorskite composite materials were prepared by method of hydrolyze-depositing.UV-Vis spectrometer was applied to characterize the absorption spectra and the band gap of the composite materials.Combining with FTIR and XPS test,the form and mechanism of N-doping were analyzed.The results show that N is doped into the composite materials by the forms of TiN,NHx and NOx.The band gap of the composite materials decreases 0.58 eV.The threshold of absorbable light wavelength is approved by 105.35 nm.%采用水解沉淀法,通过在制备过程中引入氮源制备N掺杂纳米TiO2-凹凸棒土复合材料,采用紫外-可见分光光度计分析材料的吸收光谱和禁带宽度,结合红外光谱、X射线光电子能谱的表征结果分析复合材料的N掺杂形式和机理.结果表明,N以TiN、NHx、NOx的混合形式进入TiO2晶体;TiO2晶体的禁带宽度减小0.58eV,复合材料的吸收光谱发生红移,可吸收的光波长阈值提高105.35 nm.

  12. Investigation the Al–Fe–Cr–Ti nano composites structures with using XRD and AFM techniques

    Indian Academy of Sciences (India)

    Ali Bahari; Aref Sadeghi Nik; Mandana Roodbari; Nordin Mirnia

    2012-12-01

    The performance of multilayers has been widely investigated in metal/metal systems. Shrinking this system down to less than 10 nm dislocation blocking occurs. We should thus try to find a way to get a structure with less dislocation, and/or strain because low diffusivity ultra high vacuum chamber is the basic requirements for growing ultra thin films and nano scale materials. We used William–Hall relation based on Scherr equation in X-ray powder spectrum and drawn the stress–strain diagrams. It shows that Al–Fe–Cr–Ti composites have very low diffusivity and equilibrium solubility in Al (0.05 at.% Fe, >0.02 at.% Cr, and >0.3 at.% Ti). Al–Ti– Fe–Cr composite powders have also been prepared from sol–gel method starting from elemental powders at both ambient and elevated temperatures. The obtained results from XRD (X-ray Diffraction), AFM (Atomic Force Microscopy) and X-ray powder techniques indicate that nano-grains with 0.03 at %Cr can cause a reduction of leakage current through the SS chamber due to its amorphous structure.

  13. 600 Mesh Silicon Carbide Corona Protection Varnish with EPOXY/OMMT Nano-composite Adhesive

    Institute of Scientific and Technical Information of China (English)

    HU Chunxiu; ZHAO Yingnan; HOU Haibo; ZHANG Xiaohong

    2016-01-01

    A new corona protection varnish was prepared by using epoxy/montmorillonite nano-composite and pure epoxy resin as adhesives respectively. The adhesive with different amounts of organic montmorillonite (OMMT) was mixed with 1200 mesh silicon carbide (SiC) by different weight ratios. The surface states of the varnishes with various adhesives were observed by powerful optical microscope. Some properties of the varnishes were analyzed during the enduring time under 5kV/cm DC, such as the relation of change in nonlinear coefifcient, natural surface resistivity, and surface temperature variation. The results showed that the amounts of OMMT had little effect on the natural surface resistance of the varnish but had important inlfuence on the nonlinear property of the varnish. When the range of the OMMT content was 2wt% to 6wt%, the nonlinear coefifcient of all materials with epoxy/OMMT nano-composite adhesive was higher than that with pure epoxy resin adhesive. The surface temperature of the varnish with epoxy/OMMT nanocomposite adhesive was all lower than that with the pure epoxy resin adhesive under high electrical ifeld strength.

  14. Smart magnetodielectric nano-materials for the very high frequency applications

    Energy Technology Data Exchange (ETDEWEB)

    Thakur, Atul [Department of Physics, National Taiwan University, 1 Roosevelt Road, Sec. 4, Taipei 106, Taiwan (China); Thakur, Preeti [Physics Department, Himachal Pradesh University, Shimla 171005 (India); Hsu, Jen-Hwa, E-mail: jhhsu@phys.ntu.edu.tw [Department of Physics, National Taiwan University, 1 Roosevelt Road, Sec. 4, Taipei 106, Taiwan (China)

    2011-04-28

    Research highlights: > Ni{sub 0.4}Zn{sub 0.4}Co{sub 0.2}Cu{sub 0.02}Fe{sub 1.98}O{sub 4} nano-ferrite is prepared by a co-precipitation method. > The average crystalline size of the nano-ferrite is 38 nm. > The material shows almost constant {mu} and {epsilon} in the frequency range from 10 to 200 MHz. > Relaxation phenomenon takes place above 200 MHz. > Useful as a substrate for loading the patch antenna than pure dielectric substrates. - Abstract: Cobalt and copper doped Ni-Zn nano-ferrite with a composition of Ni{sub 0.4}Zn{sub 0.4}Co{sub 0.2}Cu{sub 0.02}Fe{sub 1.98}O{sub 4} are prepared by a coprecipitation method. The structural, electromagnetic and magnetic properties are investigated by means of X-ray diffraction, impedance analyzer and vibrating sample magnetometer, respectively. Samples are calcinated at 600 deg. C and then subjected to different sintering temperatures. After sintering at 900 deg. C for 5 h, the average crystalline size is found to be 38 nm. The material shows almost constant permeability and permittivity, in the frequency range from 10 to 200 MHz, equal to {approx}10.8 (loss tangent {approx} 0.04) and {approx}6.5 (loss tangent {approx} 0.006), respectively. Relaxation phenomenon takes place beyond 200 MHz. The refractive index n is close to 8.3, and the reduced impedance Z/Z{sub 0} is close to 1.3. The persistent and higher value of permeability than that of permittivity along with low losses enables this material useful for the very high frequency applications.

  15. Tribological Properties of PVA-H Composites Reinforced by Nano-HA Particles

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The friction and wear behaviors of tribological mechanical components were studied on a four-ball tester under dry conditions, and the wear mechanism was analyzed by observed worn surface using a scanning electron microscope (SEM). It was found that the friction and wear properties were improved by the addition of nano HA particles. The composite containing 1 wt% nano HA had the optimum friction coefficient. It is also found that the addition of nano HA increases the wear resistance of pure PVA-H and PVA-H composites.

  16. Development and evaluation of fast forming nano-composite hydrogel for ocular delivery of diclofenac.

    Science.gov (United States)

    Li, Xingyi; Zhang, Zhaoliang; Chen, Hao

    2013-05-01

    In this paper, a fast forming nano-composite hydrogel was developed for potential application in ocular drug delivery. The optical transmission (OT) as well as rheological properties of nano-composite hydrogel was characterized. The developed nano-composite hydrogel given a high diclofenac micelles loading and provided a sustained release manner of diclofenac within 6h. The developed nano-composite hydrogel formulation was administrated into the eye as flowable solution, quickly forming a hydrogel that is able to resist of the blinking and flushing of tear, yet resulting in the prolonged residence time of pre-corneal. In vivo eye irritation test suggested that the developed nano-composite hydrogel was none-eye irritation might be suitable for various ocular applications. In vivo pharmacokinetic study indicated that the developed nano-composite hydrogel could significantly increase the bioavailability of diclofenac and maintain the concentration of diclofenac in aqueous humor above MEC at least 24h after administration as compared with that of the commercial diclofenac sodium eye drops, which might be able to reduce the frequency of administration for patients.

  17. From matrix nano- and micro-phase tougheners to composite macro-properties.

    Science.gov (United States)

    Kinloch, A J; Taylor, A C; Techapaitoon, M; Teo, W S; Sprenger, S

    2016-07-13

    In this paper, firstly, the morphology and toughness of a range of bulk epoxy polymers, which incorporate a second phase of well-dispersed silica nanoparticles and/or rubber microparticles, have been determined. Secondly, the macro-properties of natural-fibre reinforced-plastic (NFRP) composites based upon these epoxy polymers have been ascertained, using (i) unidirectional flax fibres or (ii) regenerated-cellulose fibres in the architecture of a plain-woven fabric. Thirdly, the toughening mechanisms which are induced in these materials by the presence of the silica nanoparticles, the rubber microparticles and the natural fibres have been identified. Finally, the values of the toughness of the bulk epoxy polymers and corresponding NFRPs have been quantitatively modelled. The increased toughness recorded for the bulk epoxy polymer due to the presence of the silica nanoparticles and/or rubber microparticles was indeed typically transferred to the NFRP composites when using such epoxies as the matrices for the fibres. Thus, the important role that may be played by modifications to the epoxy matrices in order to increase the toughness of the composites was very clearly demonstrated by these results. However, notwithstanding, the toughening mechanisms induced by the fibres were essentially responsible for the very high toughnesses of the NFRP composites, compared with the bulk epoxy polymers. The modelling studies successfully predicted the values of toughness of the bulk epoxy polymers and of the NFRP composites. These studies also quantified the extent to which each toughening mechanism, induced by the second-phase nano- and microparticles and the natural fibres, contributed to the overall values of toughness of the materials. This article is part of the themed issue 'Multiscale modelling of the structural integrity of composite materials'.

  18. Study on Properties of PP/Nano-CaCO3/EPDM Composite%PP/Nano-CaCO3/EPDM复合材料性能研究

    Institute of Scientific and Technical Information of China (English)

    崔文广; 高岩磊; 刘会茹; 郧海丽

    2013-01-01

    PP/nano-CaCO3/EPDM composite was prepared by melt blending. The effect of the nano-CaCO3 amount and EPDM amount on mechanical property of the PP/nano-CaCO3/EPDM composite were respectively studied. The results showed that the impact strength and tensile strength of the PP/ nano-CaCO3/EPDM composite both increased with the nano-CaCO3 content, and then decreased with the nano-CaCO3 content, and the flexural modulus of the composite increased with the nano-CaCO3 content. The impact strength of the PP/nano-CaCO3/EPDM composite increased with the EPDM content, and the tensile strength and flexural modulus of the PP/nano-CaCO3/EPDM composite both decreased with the EPDM content.%采用熔融共混法制备出了聚丙烯(PP)/纳米碳酸钙(nano-CaCO3)/三元乙丙橡胶(EPDM)复合材料.分别研究了nano-CaCO3和EPDM的加入量对复合材料力学性能的影响.结果表明:随着nano-CaCO3用量的增加,复合材料的冲击强度和拉伸强度均呈现出先增加后降低的趋势,弯曲模量呈增加趋势;随着EPDM用量的增加,复合材料的冲击强度呈增加趋势,拉伸强度和弯曲模量均呈下降趋势.

  19. Microstructural Characterisation and Wear Behaviour of Diamond Composite Materials

    Directory of Open Access Journals (Sweden)

    Xing S. Li

    2010-02-01

    Full Text Available Since the initial research leading to the production of diamond composite materials, there have been several important developments leading to significant improvements in the properties of these superhard composite materials. Apart from the fact that diamonds, whether originating from natural resources or synthesised commercially, are the hardest and most wear-resistant materials commonly available, there are other mechanical properties that limit their industrial application. These include the low fracture toughness and low impact strength of diamond. By incorporating a range of binder phases into the sintering production process of these composites, these critically important properties have been radically improved. These new composites can withstand much higher operating temperatures without markedly reducing their strength and wear resistance. Further innovative steps are now being made to improve the properties of diamond composites by reducing grain and particle sizes into the nano range. This review will cover recent developments in diamond composite materials with special emphasis on microstructural characterisation. The results of such studies should assist in the design of new, innovative diamond tools as well as leading to radical improvements in the productivity of cutting, drilling and sawing operations in the exploration, mining, civil construction and manufacturing industries.

  20. Nano-Composites: Relationships Between Nano-Structure and Mechanical Properties: Phase II

    Science.gov (United States)

    2006-01-01

    a standard diglycidyl ether of bis-phenol A ( DGEBA ) with an epoxy equivalent weight (EEW) of 185 g/mol, ‘Bakelite EPR 164’ supplied by Bakelite AG...Duisberg, Germany. The nano-particles of silica (SiO2) were obtained at a concentration at 40wt.% in this DGEBA epoxy resin: ‘Nanopox F400’ from...the simple DGEBA epoxy with given amounts of the nano-SiO2 epoxy and CTBN- epoxy adduct, to give the required levels of added nano-SiO2 and CTBN

  1. Study on Properties of HDPE/Nano-CaCO3 Composite%HDPE/nano-CaCO3复合材料性能研究

    Institute of Scientific and Technical Information of China (English)

    崔文广; 高岩磊; 刘会茹; 郧海丽

    2012-01-01

    HDPE/nano-CaCO3 composite was prepared by melt blending. The effect of the nano-CaCO3 content on mechanical property of the HDPE/nano-CaCO 3 composite was studied. The dispersion of the nano-CaCOj in HDPE matrix was analyzed by SEM. The results showed that the impact strength and tensile strength of the HDPE/namrCaCO3 composite both increased with the namrCaCO3 content, and then decreased with the nano-CaCOj content, but the flexural modulus of the HDPE/namrCaCO3 composite evidently increased with the nano-CaCO3 content. The dispersion of the nano-CaCO3 in HDPE matrix gradually became bad.%采用熔融共混法制备出了高密度聚乙烯( HDPE)/纳米碳酸钙(nano-CaCO3)复合材料.研究了nano-CaCO3的加入量对复合材料力学性能的影响,利用扫描电镜(SEM)分析了nano-CaCO3在HDPE基体中的分散性.结果表明,随着nano-CaCO3用量的增加,HDPE/nano-CaCO3复合材料的冲击强度和拉伸强度均呈现出先增加后降低的趋势,而弯曲模量呈增加趋势;随着用量的增加,nano-CaCO3在HDPE基体中的分散性逐渐变差.

  2. Effect of Wet Surface Treated Nano-SiO2 on Mechanical Properties of Polypropylene Composite

    Institute of Scientific and Technical Information of China (English)

    WANG Dongbo; FENG Yujie; HAN Liwei; TIAN Yan

    2008-01-01

    Nano-SiO2/polypropylene composite was prepared by melt-blending process. The nano-SiO2 particles were organized by wet process surface treatment with silane coupling agent KH-570. The effect of mass fraction of nano-SiO2 particles and dosage of KH-570 on the toughening and strengthening of PP matrix were investigated based on the fractography of impact notch and the analysis of crystal structure by X-ray and dispersive structure of nano-SiO2 by TEM. Results show that the impact and flexural strength and modulus of the composite are improved obviously with low loading of nano-SiO2 (3wt%-5wt%), and the izod impact strength of PP increases twice with 4wt% nano-SiO2. The nano-SiO2 particles treated can disperse into the matrix resin, which has evident heterogeneous nucleation effects on the crystallization of PP. The optimal toughening and strengthening effects of PP matrix can be obtained when the content of nano-SiO2 and KH-570 are 4wt% and 3wt%, respectively.

  3. Effective elastic moduli and interface effects of nano- crystalline materials

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Many properties of nanocrystalline materials are associated with interface effects. Based on their microstructural features, the influence of interfaces on the effective elastic property of nanocrystalline materials is investigated. First, the Mori-Tanaka method is employed to determine the overall effective elastic moduli by considering a nanocrystalline material as a binary composite solid consisting of a crystal or inclusion phase with regular lattice connected by an amorphous-like interface or matrix phase. The effects of strain gradients are then examined on the effective elastic property by using the strain gradient theory to analyze a representative unit cell. Two interface mechanisms are elucidated that influence the effective stiffness and other mechanical properties of materials. One is the softening effect due to the distorted atomic structures and the increased atomic spacings in interface regions, and the other is the baffling effect due to the existence of boundary layers near interfaces.

  4. Raman Mapping for the Investigation of Nano-phased Materials

    Science.gov (United States)

    Gouadec, G.; Bellot-Gurlet, L.; Baron, D.; Colomban, Ph.

    Nanosized and nanophased materials exhibit special properties. First they offer a good compromise between the high density of chemical bonds by unit volume, needed for good mechanical properties and the homogeneity of amorphous materials that prevents crack initiation. Second, interfaces are in very high concentration and they have a strong influence on many electrical and redox properties. The analysis of nanophased, low crystallinity materials is not straigtforward. The recording of Raman spectra with a geometric resolution close to 0.5 \\upmu {text{ m}^3} and the deep understanding of the Raman signature allow to locate the different nanophases and to predict the properties of the material. Case studies are discussed: advanced polymer fibres, ceramic fibres and composites, textured piezoelectric ceramics and corroded (ancient) steel.

  5. Cu–Co–O nano-catalysts as a burn rate modifier for composite solid propellants

    Directory of Open Access Journals (Sweden)

    D. Chaitanya Kumar Rao

    2016-08-01

    Full Text Available Nano-catalysts containing copper–cobalt oxides (Cu–Co–O have been synthesized by the citric acid (CA complexing method. Copper (II nitrate and Cobalt (II nitrate were employed in different molar ratios as the starting reactants to prepare three types of nano-catalysts. Well crystalline nano-catalysts were produced after a period of 3 hours by the calcination of CA–Cu–Co–O precursors at 550 °C. The phase morphologies and crystal composition of synthesized nano-catalysts were examined using Scanning Electron Microscope (SEM, Energy Dispersive Spectroscopy (EDS and Fourier Transform Infrared Spectroscopy (FTIR methods. The particle size of nano-catalysts was observed in the range of 90 nm–200 nm. The prepared nano-catalysts were used to formulate propellant samples of various compositions which showed high reactivity toward the combustion of HTPB/AP-based composite solid propellants. The catalytic effects on the decomposition of propellant samples were found to be significant at higher temperatures. The combustion characteristics of composite solid propellants were significantly improved by the incorporation of nano-catalysts. Out of the three catalysts studied in the present work, CuCo-I was found to be the better catalyst in regard to thermal decomposition and burning nature of composite solid propellants. The improved performance of composite solid propellant can be attributed to the high crystallinity, low agglomeration and lowering the decomposition temperature of oxidizer by the addition of CuCo-I nano-catalyst.

  6. Polymeric nano-materials for corrosion control of steel in concrete

    NARCIS (Netherlands)

    Varini, M.; Koleva, D.A.; Denkova, A.G.; Mol, J.M.C.; Terryn, H.; Van Breugel, K.

    2013-01-01

    Polymeric nano-materials utilization in reinforced concrete, aiming to deal with steel corrosion was developed in previous works. Promising results were obtained with PEO–b–PS nano-formations, both in terms of enhanced bulk matrix properties and improved steel corrosion resistance. Recent research h

  7. A nano lamella NbTi–NiTi composite with high strength

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Jiang; Jiang, Daqiang; Hao, Shijie; Yu, Cun; Zhang, Junsong; Ren, Yang; Lu, Deping; Xie, Shifang; Cui, Lishan

    2015-05-01

    A hypereutectic Nb60Ti24Ni16 (at%) alloy was prepared by vacuum induction melting, and a nano lamellae NbTi-NiTi composite was obtained by hot-forging and wire-drawing of the ingot Microscopic analysis showed that NbTi and NiTi nano lamellae distributed alternatively in the composite, and aligned along the wire axial direction, with a high volume fraction (similar to 70%) of NbTi nano lamellae. In situ synchrotron X-ray diffraction analysis revealed that stress induced martensitic transformation occurred upon loading, which would effectively weaken the stress concentration at the interface and avoid the introduction of defects into the nano reinforced phase. Then the embedded NbTi nano lamellae exhibited a high elastic strain up to 2.72%, 1.5 times as high as that of the Nb nanowires embedded in a conventional plastic matrix, and the corresponding stress carried by NbTi was evaluated as 2.53 GPa. The high volume fraction of NbTi nano lamellae improved the translation of high strength from the nano reinforced phase into bulk properties of the composite, with a platform stress of similar to 1.7 GPa and a fracture strength of similar to 1.9 GPa. (C) 2015 Elsevier B.V. All rights reserved.

  8. A nano lamella NbTi–NiTi composite with high strength

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Jiang [Jiangxi Key Laboratory of Advanced Copper and Tungsten Materials, Jiangxi Academy of Sciences, Nanchang 330029 (China); Institute of Applied Physics of Jiangxi Academy of Sciences, Nanchang 330029 (China); State Key Laboratory of Heavy Oil Processing and Department of Materials Science and engineering, China University of Petroleum, Beijing 102249 (China); Jiang, Daqiang [State Key Laboratory of Heavy Oil Processing and Department of Materials Science and engineering, China University of Petroleum, Beijing 102249 (China); School of Mechanical and Chemical Engineering, The University of Western Australia, WA 6009 (Australia); Hao, Shijie; Yu, Cun; Zhang, Junsong [State Key Laboratory of Heavy Oil Processing and Department of Materials Science and engineering, China University of Petroleum, Beijing 102249 (China); Ren, Yang [X-ray Science Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Lu, Deping; Xie, Shifang [Jiangxi Key Laboratory of Advanced Copper and Tungsten Materials, Jiangxi Academy of Sciences, Nanchang 330029 (China); Institute of Applied Physics of Jiangxi Academy of Sciences, Nanchang 330029 (China); Cui, Lishan, E-mail: lishancui63@126.com [State Key Laboratory of Heavy Oil Processing and Department of Materials Science and engineering, China University of Petroleum, Beijing 102249 (China)

    2015-05-01

    A hypereutectic Nb{sub 60}Ti{sub 24}Ni{sub 16} (at%) alloy was prepared by vacuum induction melting, and a nano lamellae NbTi–NiTi composite was obtained by hot-forging and wire-drawing of the ingot. Microscopic analysis showed that NbTi and NiTi nano lamellae distributed alternatively in the composite, and aligned along the wire axial direction, with a high volume fraction (~70%) of NbTi nano lamellae. In situ synchrotron X-ray diffraction analysis revealed that stress induced martensitic transformation occurred upon loading, which would effectively weaken the stress concentration at the interface and avoid the introduction of defects into the nano reinforced phase. Then the embedded NbTi nano lamellae exhibited a high elastic strain up to 2.72%, 1.5 times as high as that of the Nb nanowires embedded in a conventional plastic matrix, and the corresponding stress carried by NbTi was evaluated as 2.53 GPa. The high volume fraction of NbTi nano lamellae improved the translation of high strength from the nano reinforced phase into bulk properties of the composite, with a platform stress of ~1.7 GPa and a fracture strength of ~1.9 GPa.

  9. Nano structured materials studied by coherent X-ray diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Gulden, Johannes

    2013-03-15

    Structure determination with X-rays in crystallography is a rapidly evolving field. Crystallographic methods for structure determination are based on the assumptions about the crystallinity of the sample. It is vital to understand the structure of possible defects in the crystal, because they can influence the structure determination. All conventional methods to characterize defects require a modelling through simulated data. No direct methods exist to image the core of defects in crystals. Here a new method is proposed, which will enable to visualize the individual scatterers around and at defects in crystals. The method is based on coherent X-ray scattering. X-rays are perfectly suited since they can penetrate thick samples and buried structures can be investigated Recent developments increased the coherent flux of X-Ray sources such as synchrotrons by orders of magnitude. As a result, the use of the coherent properties of X-rays is emerging as a new aspect of X-ray science. New upcoming and operating X-ray laser sources will accelerate this trend. One new method which has the capacity to recover structural information from the coherently scattered photons is Coherent X-ray Diffraction Imaging (CXDI). The main focus of this thesis is the investigation of the structure and the dynamics of colloidal crystals. Colloidal crystals can be used as a model for atomic crystals in order to understand the growth and defect structure. Despite the large interest in these structures, many details are still unknown.Therefore, it is vital to develop new approaches to measure the core of defects in colloidal crystals. After an introduction into the basics of the field of coherent X-ray scattering, this thesis introduces a novel method, Small Angle Bragg Coherent Diffractive Imaging, (SAB-CDI). This new measurement technique which besides the relevance to colloidal crystals can be applied to a large variety of nano structured materials. To verify the experimental possibilities the

  10. Size-dependent anomalous dielectric behavior in La2O3: SiO2 nano-glass composite system

    Science.gov (United States)

    Kao, T. H.; Mukherjee, S.; Lin, Y. H.; Chou, C. C.; Yang, H. D.

    2012-12-01

    An intriguing anomalous dielectric behavior is observed in nanoparticle (NP) La2O3: SiO2 nano-glass composite system synthesized via sol-gel route at different calcination temperatures. Temperature dependent dielectric properties exhibit a notable dielectric broadening, indicating of diffuse phase transition with high ɛ', quite different from and much higher than pure bulk La2O3 and SiO2. We postulate such dielectric effect in the context of the oxygen vacancies of the rare earth oxide nano-glass composite, where lattice strain related with NPs and their size plays a vital role. Such a material might be treated as a potential candidate to solve the problem of devices miniaturization.

  11. Gold surface supported spherical liposome-gold nano-particle nano-composite for label free DNA sensing.

    Science.gov (United States)

    Bhuvana, M; Narayanan, J Shankara; Dharuman, V; Teng, W; Hahn, J H; Jayakumar, K

    2013-03-15

    Immobilization of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) liposome-gold nano-particle (DOPE-AuNP) nano-composite covalently on 3-mercaptopropionic acid (MPA) on gold surface is demonstrated for the first time for electrochemical label free DNA sensing. Spherical nature of the DOPE on the MPA monolayer is confirmed by the appearance of sigmoidal voltammetric profile, characteristic behavior of linear diffusion, for the MPA-DOPE in presence of [Fe(CN)(6)](3-/4-) and [Ru(NH(3))(6)](3+) redox probes. The DOPE liposome vesicle fusion is prevented by electroless deposition of AuNP on the hydrophilic amine head groups of the DOPE. Immobilization of single stranded DNA (ssDNA) is made via simple gold-thiol linkage for DNA hybridization sensing in the presence of [Fe(CN)(6)](3-/4-). The sensor discriminates the hybridized (complementary target hybridized), un-hybridized (non-complementary target hybridized) and single base mismatch target hybridized surfaces sensitively and selectively without signal amplification. The lowest target DNA concentration detected is 0.1×10(-12)M. Cyclic voltammetry (CV), electrochemical impedance (EIS), differential pulse voltammetry (DPV) and quartz crystal microbalance (QCM) techniques are used for DNA sensing on DOPE-AuNP nano-composite. Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), Atomic Force Microscopy (AFM), Dynamic Light Scattering (DLS) and Ultraviolet-Visible (UV) spectroscopic techniques are used to understand the interactions between the DOPE, AuNP and ssDNA. The results indicate the presence of an intact and well defined spherical DOPE-AuNP nano-composite on the gold surface. The method could be applied for fabrication of the surface based liposome-AuNP-DNA composite for cell transfection studies at reduced reagents and costs.

  12. Nano-enhanced food contact materials and the in vitro toxicity to human intestinal cells of nano-ZnO at low dose

    Energy Technology Data Exchange (ETDEWEB)

    Claonadh, Niall O; Casey, Alan; Mukherjee, Sanchali Gupta; Chambers, Gordon [Nanolab Research Centre, Focas Institute, Dublin Institute of Technology, Dublin (Ireland); Lyons, Sean; Higginbotham, Clement, E-mail: Niall.OClaonadh@DIT.ie, E-mail: Alan.Casey@DIT.ie [Materials Research Institute, Athlone Institute of Technology, Westmeath (Ireland)

    2011-07-06

    Nano Zinc Oxide (nZnO) has been shown to display antimicrobial effects which have lead to its application in a number of areas such as antimicrobial surface coatings, anti bacterial wound dressings and more recently in polymer composite systems for use in food contact materials. Concerns have been raised due to the incorporation of nanoparticles in food packaging stemming from the possibility of repeated low dose direct exposure, through ingestion, primarily due to degradation and nanoparticle leaching from the polymer composite. To address these concerns, composites consisting of nZnO and polyethylene were formed using twin screw extrusion to mimic commercial methods of food contact material production. A leaching study was performed using Atomic Absorption Spectroscopy in order to determine the concentration of nZnO leached from the composite. Composite stability studies were performed and a leached nZnO concentration was evaluated. This concentration range was then utilised in a series of tests aimed at determining the toxicity response associated with nZnO when exposed to an intestinal model. In this study two human colorectal carcinoma cell lines, HT29 (ATCC No: HTB-38) and SW480 (ATTC No: CCL-228), were employed as a model to represent areas exposed by ingestion. These lines were exposed to a concentration range of nZnO which incorporated the concentration leached from the composites. The cytotoxic effects of nZnO were evaluated using four cytotoxic endpoints namely the Neutral Red, Alamar Blue, Coomassie Blue and MTT assays. The results of these studies are presented and their implications for the use on nano ZnO in direct food contact surfaces will be discussed.

  13. Nano-enhanced food contact materials and the in vitro toxicity to human intestinal cells of nano-ZnO at low dose

    Science.gov (United States)

    Claonadh, Niall Ó.; Casey, Alan; Lyons, Sean; Higginbotham, Clement; Gupta Mukherjee, Sanchali; Chambers, Gordon

    2011-07-01

    Nano Zinc Oxide (nZnO) has been shown to display antimicrobial effects which have lead to its application in a number of areas such as antimicrobial surface coatings, anti bacterial wound dressings and more recently in polymer composite systems for use in food contact materials. Concerns have been raised due to the incorporation of nanoparticles in food packaging stemming from the possibility of repeated low dose direct exposure, through ingestion, primarily due to degradation and nanoparticle leaching from the polymer composite. To address these concerns, composites consisting of nZnO and polyethylene were formed using twin screw extrusion to mimic commercial methods of food contact material production. A leaching study was performed using Atomic Absorption Spectroscopy in order to determine the concentration of nZnO leached from the composite. Composite stability studies were performed and a leached nZnO concentration was evaluated. This concentration range was then utilised in a series of tests aimed at determining the toxicity response associated with nZnO when exposed to an intestinal model. In this study two human colorectal carcinoma cell lines, HT29 (ATCC No: HTB-38) and SW480 (ATTC No: CCL-228), were employed as a model to represent areas exposed by ingestion. These lines were exposed to a concentration range of nZnO which incorporated the concentration leached from the composites. The cytotoxic effects of nZnO were evaluated using four cytotoxic endpoints namely the Neutral Red, Alamar Blue, Coomassie Blue and MTT assays. The results of these studies are presented and their implications for the use on nano ZnO in direct food contact surfaces will be discussed.

  14. A comparative study on low cycle fatigue behaviour of nano and micro Al2O3 reinforced AA2014 particulate hybrid composites

    Science.gov (United States)

    Senthilkumar, R.; Arunkumar, N.; Manzoor Hussian, M.

    Aluminium based metal matrix composites have drawn more attraction due to their improved properties in structural applications for the past two decades. The fatigue behaviour of composite materials needs to be studied for their structural applications. In this work, powder metallurgy based aluminium (AA2014) alloy reinforced with micro and nano-sized alumina particles were fabricated and consolidated with the hot extrusion process. The evaluation of mechanical properties in the extruded composite was carried out. This composite was subjected to low cycle fatigue test with a constant strain rate. Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM) images were used to evaluate the fatigue behaviour of aluminium-nano composite samples. Enhanced mechanical properties were exhibited by the nano alumina reinforced aluminium composites, when compared to the micron sized alumina reinforced composites. The failure cycle is observed to be higher for the nano alumina reinforced composites when compared with micron sized alumina composites due to a lower order of induced plastic strain.

  15. A comparative study on low cycle fatigue behaviour of nano and micro Al2O3 reinforced AA2014 particulate hybrid composites

    Directory of Open Access Journals (Sweden)

    R. Senthilkumar

    2015-01-01

    Full Text Available Aluminium based metal matrix composites have drawn more attraction due to their improved properties in structural applications for the past two decades. The fatigue behaviour of composite materials needs to be studied for their structural applications. In this work, powder metallurgy based aluminium (AA2014 alloy reinforced with micro and nano-sized alumina particles were fabricated and consolidated with the hot extrusion process. The evaluation of mechanical properties in the extruded composite was carried out. This composite was subjected to low cycle fatigue test with a constant strain rate. Scanning Electron Microscope (SEM and Transmission Electron Microscope (TEM images were used to evaluate the fatigue behaviour of aluminium-nano composite samples. Enhanced mechanical properties were exhibited by the nano alumina reinforced aluminium composites, when compared to the micron sized alumina reinforced composites. The failure cycle is observed to be higher for the nano alumina reinforced composites when compared with micron sized alumina composites due to a lower order of induced plastic strain.

  16. Heterogenous Photocatalysis Treatement of Azo Dye Methyl Orange by Nano Composite Tio2/Diatomite

    Directory of Open Access Journals (Sweden)

    Rachida Cherrak

    2015-09-01

    Full Text Available The objective of this work is to study the removal of an azo dye methyl orange (MeO by dioxide titanium supported on the surface of diatomite, as a new nano-composite by an advanced oxidation method as heterogeneous Photocatalysis. The titanium oxide (Degussa-25 was immobilized on the powder of diatomaceous earth with a very simple method and low expensive. Diatomite used in this study has porosity more 72%; was thermal activated at temperatures of 800 ° c and 900 ° c and 1000 ° C for 2 h and chemically by sulfuric acid at reflux. Photocatalytic degradation of methyl orange use, was studied in the presence of the materials prepared in solution aqueous with different compositions, M1 (1 g diatomite + 0.5 g TiO2 and M2 (5 g diatomite + 0.5 g TiO2. The photocatalytic activity of the prepared catalysts was tested in a single reactor followed by pH analyzes conductivity and the absorbance. The prepared materials exhibit a very porous morphology, which has been confirmed by several methods DRX, SEM and IR. The results of the photocatalytic treatment of water synthetically polluted with MeO at initial concentration 10 ppm showed a good performance for four nano composite prepared: M1TA is composed by material M1 with diatomite treated by sulfuric acid, and M1TT is composed by material M1 with diatomite calcined at 1000 ° C, and M2TA is M2 material with diatomite treated by sulfuric acid, and M2TT is M2 material with diatomite calcined at 1000 ° c. Maximum efficiency of removing MeO that reaches 84% and 72% for M2TA, M1TT According to the kinetic study reveals that the phenomenon is mixed resulting in a rapid response that is established after 30 minutes, the reaction kinetics of the methyl orange photodegradation following the model of the first order.

  17. Materiomics: biological protein materials, from nano to macro

    Directory of Open Access Journals (Sweden)

    Steven Cranford

    2010-11-01

    Full Text Available Steven Cranford, Markus J BuehlerCenter for Materials Science and Engineering, Laboratory for Atomistic and Molecular Mechanics, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, USAAbstract: Materiomics is an emerging field of science that provides a basis for multiscale material system characterization, inspired in part by natural, for example, protein-based materials. Here we outline the scope and explain the motivation of the field of materiomics, as well as demonstrate the benefits of a materiomic approach in the understanding of biological and natural materials as well as in the design of de novo materials. We discuss recent studies that exemplify the impact of materiomics – discovering Nature’s complexity through a materials science approach that merges concepts of material and structure throughout all scales and incorporates feedback loops that facilitate sensing and resulting structural changes at multiple scales. The development and application of materiomics is illustrated for the specific case of protein-based materials, which constitute the building blocks of a variety of biological systems such as tendon, bone, skin, spider silk, cells, and tissue, as well as natural composite material systems (a combination of protein-based and inorganic constituents such as nacre and mollusk shells, and other natural multiscale systems such as cellulose-based plant and wood materials. An important trait of these materials is that they display distinctive hierarchical structures across multiple scales, where molecular details are exhibited in macroscale mechanical responses. Protein materials are intriguing examples of materials that balance multiple tasks, representing some of the most sustainable material solutions that integrate structure and function despite severe limitations in the quality and quantity of material building blocks. However, up until now, our attempts to analyze and

  18. THE PREPARATION AND STUDY ON THE NANO-TiO2/SILK FIBROIN COMPOSITE FILMS BY THE SOL-GEL METHOD

    Institute of Scientific and Technical Information of China (English)

    FENG Xinxing; CHEN Jianyong; YU Chunhua

    2006-01-01

    Based on the sol-gel technique using butyl titanate as oxide precursor, the regenerated SF (silk fibroin)/nano-TiO2 composite films were synthesized. Different amounts of butyl titanate to SF were used to verify this effect on the characteristics of the formed materials. Samples were characterized by thermogravimetric analysis, X-ray diffractometry, UV, AFM and FT-IR spectroscopy.The experimental results reveal that, compared to the pure silk fibroin films, the mechanical strength of these regenerated SF/nano-TiO2 composite films were increased and the dissolubility in water of SF/nano-TiO2 composite films in aqueous solution were decreased. The diameter of nano-TiO2 particle films was about 80nm through UV and AFM. The nano-TiO2 particles were well dispersed in the regenerated silk fibroin. It was found that the crystal structures of the composite films were transited from typical Silk Ⅰ to typical Silk Ⅱ by the XRD and FTIR. Furthermore, the crystallinity of the composite films was obviously improved. Through the TGA, it was demonstrated that the heat transition temperature of composite films was also enhanced.

  19. Bioenvironmental Engineering Guide for Composite Materials

    Science.gov (United States)

    2014-03-31

    materials but may often have hybrid blends of composite materials. Therefore, referencing the specific aircraft’s composite material makeup and...Health Risk Analysis; 2001 Aug. Report No. IERA-RS-BR-TR-2001-0009. 8. Martin Marietta Corporation. Dust control handbook for minerals processing

  20. 纳秒激光刻蚀复合材料基金属薄膜机制研究%Mechanism of Nano-Second Laser Ablation of Metallic Thin Film on Composite Material

    Institute of Scientific and Technical Information of China (English)

    杨建平; 陈学康; 吴敢; 王瑞

    2011-01-01

    The processings of laser energy absorption and thermal conduct are analyzed, and a mechanism of metallic film/composite substrate interface separation while metallic film in solid state due to the composite material thermal decomposition is also proposed subsequently. A new method of improving laser ablation accuracy using this mechanism and laser power distribution transform technology is proposed. Laser wavefront diffraction transform technology is employed to convert the ablation laser power density and its distribution, and the confirmed experiment is carried out.%通过分析激光脉冲作用于金属薄膜后的能量吸收及演化过程,提出了金属薄膜/复合材料组合体系在纳秒级脉冲激光作用下,因复合材料易气化的特性而存在的特有的薄膜/基底界面分离现象.提出利用这一特有的界面分离过程,可通过控制激光能量密度实现对这种结构体系的高精度、无损伤的刻蚀.利用波前衍射变换技术整形过的刻蚀激光进行了验证实验,实验结果证实了这一方法的可行性.

  1. Mechanical properties of materials at micro/nano scales

    Science.gov (United States)

    Xu, Wei-Hua

    Mechanical properties of materials in small dimensions, including the depth-dependent hardness at the nano/micrometer scales, and the mechanical characterization of thin films and nanotubes, are reported. The surface effect on the depth-dependent nano/microhardness was studied and an apparent surface stress was introduced to represent the energy dissipated per unit area of a solid surface. A plastic bearing ratio model was proposed for the nanoindentation of rough surfaces. The energy dissipation occurring at the indented surface is among the factors that cause the Indentation Size Effect (ISE) at the micro/nanometer scales. Furthermore, an elastic-plastic bearing ratio model was developed for nanoindentation of rough surfaces with a flat indenter tip. The theoretical predictions agree with the experimental results and finite element simulations, from which the elastic constant and the surface hardness were extracted. The surface hardness exhibits an inverse ISE due to the interaction of asperities. The nanoindentation tests on Highly Oriented Pyrolytic Graphite (HOPG) may lead to the formation of carbon tubes, which are rolled up by the delaminated graphite layers. The nanoindentation loading-unloading curves reveal single pop-in and multiple pop-in phenomena, which is induced by fracture of the graphite layers and/or by delamination between the layers. From the load at pop-in, the fracture strength of the layers and/or the bonding strength between the layers can be estimated by the elastic field model for Hertzian contact including sliding friction for transverse isotropy. Two novel methods were developed to estimate the mechanical properties of films, including the Raman spectra method for the estimation of residual stresses in thin ferroelectric films and the microbridge testing method for the mechanical characterization of trilayer thin films. Mechanical characterization was also carried out on Tobacco Mosaic Virus (TMV) nanotubes with each being comprised of

  2. Synthesis of alginate bioencapsulated nano-hydroxyapatite composite for selective fluoride sorption.

    Science.gov (United States)

    Pandi, Kalimuthu; Viswanathan, Natrayasamy

    2014-11-04

    This article focuses on the development of eco-friendly adsorbent by alginate (Alg) bioencapsulating nano-hydroxyapatite (n-HAp) namely n-HApAlg composite for defluoridation studies in batch mode. n-HAp powder utilized as a promising defluoridating material, but it causes a significant pressure drop during field applications. To overcome such technological bottlenecks, n-HApAlg composite was synthesized. The defluoridation capacity (DC) of synthesized n-HApAlg composite possesses an enhanced DC of 3870 mg F(-)/kg when compared to n-HAp and calcium alginate (CaAlg) composite which possess DC of 1296 and 680 mg F(-)/kg, respectively. The biocomposite features were characterized using FTIR and SEM with EDAX analysis. The various adsorption influencing parameters like contact time, pH, co-anions, initial fluoride concentration and temperature were optimized. The adsorption process was enlightened by various isotherms and kinetic models. The suitability of the biocomposite at field conditions was also tested.

  3. Enhanced defluoridation and facile separation of magnetic nano-hydroxyapatite/alginate composite.

    Science.gov (United States)

    Pandi, Kalimuthu; Viswanathan, Natrayasamy

    2015-09-01

    In this research study, a new magnetic biosorbent was developed by the fabrication of magnetic Fe3O4 particles on nano-hydroxyapatite(n-HAp)/alginate (Alg) composite (Fe3O4@n-HApAlg composite) for defluoridation in batch mode. The synthesized Fe3O4@n-HApAlg biocomposite possess an enhanced defluoridation capacity (DC) of 4050 mgF(-)/kg when compare to n-HApAlg composite, Fe3O4@n-HAp composite, n-HAp and Fe3O4 which possesses the DCs of 3870, 2469, 1296 and 1050 mgF(-)/kg respectively. The structural changes of the sorbent, before and after fluoride sorption were studied using FTIR, XRD and SEM with EDAX techniques. There are various physico-chemical parameters such as contact time, pH, co-existing anions, initial fluoride concentration and temperature were optimized for maximum fluoride removal. The equilibrium data was well modeled by Freundlich, Langmuir, Dubinin-Radushkevich (D-R) and Temkin isotherms. The present system follows Dubinin-Radushkevich isotherm model. The thermodynamic parameters reveals that the feasibility, spontaneity and endothermic nature of fluoride sorption. The performance and efficiency of the adsorbent material was examined with water samples collected from fluoride endemic areas namely Reddiyarchatram and Ammapatti in Dindigul District of Tamil Nadu using standard protocols.

  4. Nano-crystalline FeOOH mixed with SWNT matrix as a superior anode material for lithium batteries

    Institute of Scientific and Technical Information of China (English)

    Mingzhong Zou; Weiwei Wen; Jiaxin Li; Yingbin Lin; Heng Lai; Zhigao Huang

    2014-01-01

    Nano-crystalline FeOOH particles (5∼10 nm) have been uniformly mixed with electric matrix of single-walled carbon nanotubes (SWNTs) for forming FeOOH/SWNT composite via a facile ultrasonication method. Directly using the FeOOH/SWNT composite (containing 15 wt%SWNTs) as anode material for lithium battery enhances kinetics of the Li+ insertion/extraction processes, thereby effectively improving re-versible capacity and cycle performance, which delivers a high reversible capacity of 758 mAh·g-1 under a current density of 400 mA·g-1 even after 180 cycles, being comparable with previous reports in terms of electrochemical performance for FeOOH anode. The good electrochemical performance should be ascribed to the small particle size and nano-crystalline of FeOOH, as well as the good electronic conductivity of SWNT matrix.

  5. Building energetic material from novel salix leaf-like CuO and nano-Al through electrophoretic deposition

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Yan Jun; Li, Xueming [College of Chemistry and Chemical Engineering, Chongqing University, Chongqing (China)

    2016-11-15

    In this study, an energetic material was prepared by depositing nano-Al on CuO arrays via electrophoretic deposition (EPD), which offers a feasible route for nano-Al integration. The morphology and structure of the CuO arrays and Al/CuO composites were characterized by scanning electron microscopy and X-ray diffraction. The CuO arrays were homogenously salix leaf-like structure with a width of ⁓150 to 200 nm. The energy density of Al/CuO composites was approximate to 1454.5 J/g by integrating the differential scanning calorimetry (DSC) plot and the combustion performance was recorded by a high-speed camera. Moreover, the combustion flames were violent and the whole reaction process only lasted 72.2 ms, indicating that the energy of the Al/CuO nanothermite can be released effectively.

  6. Fabrication of nano-Fe3O4 3D structure on carbon fibers as a microwave absorber and EMI shielding composite by modified EPD method

    Science.gov (United States)

    Gholampoor, Mahdi; Movassagh-Alanagh, Farid; Salimkhani, Hamed

    2017-02-01

    Recently, electromagnetic interference (EMI) shielding materials have absorbed a lot of attention due to a growing need for application in the area of electronic and wireless devices. In this study, a carbon-based EMI shielding composite was fabricated by electrophoretic deposition of Fe3O4 nano-particles on carbon fibers (CFs) as a 3D structure incorporated with an epoxy resin. Co-precipitation method was employed to synthesize Fe3O4 nano-particles. This as-synthesized Fe3O4 nano-powder was then successfully deposited on CFs using a modified multi-step electrophoretic deposition (EPD) method. The results of structural studies showed that the Fe3O4 nano-particles (25 nm) were successfully and uniformly deposited on CFs. The measured magnetic properties of as-synthesized Fe3O4 nano-powder and nano-Fe3O4/CFs composite showed that the saturation magnetization of bare Fe3O4 was decreased from Ms = 72.3 emu/g to Ms = 33.1 emu/g for nano-Fe3O4/CFs composite and also corecivity of Fe3O4 was increased from Hc = 4.9 Oe to Hc = 168 Oe for composite. The results of microwave absorption tests revealed that the reflection loss (RL) of an epoxy-based nano-Fe3O4/CFs composite are significantly influenced by layer thickness. The maximum RL value of -10.21 dB at 10.12 GHz with an effective absorption bandwidth about 2 GHz was obtained for the sample with the thickness of 2 mm. It also exhibited an EMI shielding performance of -23 dB for whole the frequency range of 8.2-12.4 GHz.

  7. Synthesis and micro-structural study of one-dimensional nano-materials

    Institute of Scientific and Technical Information of China (English)

    周光文; 张泽; 俞大鹏

    1999-01-01

    Silicon nano-wires (SiNWs) and boron nitride nano-tubules (BN-NTs) were successfully synthesized by excimer laser ablation at high temperature. These one-dimensional nano-materials synthesized by this method have a very high yield, a uniform diameter distribution, and a high purity. Micro-structures of these nano-materials were investigated by transmission electron microscopy (TEM). The SiNWs have a high density of structural defects of microtwin, stacking faults, and low-angle boundary, which ere closely related to the formation of SiNWs and the determination of morphology of the nano-wires. BN-NTs ere mainly single atomic-layered and the outer surface of tubules is clean without any attachment. The formation of single atomic-layered tubule is attributed to the catalyst effect which makes the axial rate of BN-NTs much higher than the radial growth.

  8. Carbon Cryogel and Carbon Paper-Based Silicon Composite Anode Materials for Lithium-Ion Batteries

    Science.gov (United States)

    Woodworth, James; Baldwin, Richard; Bennett, William

    2010-01-01

    A variety of materials are under investigation for use as anode materials in lithium-ion batteries, of which, the most promising are those containing silicon. 6 One such material is a composite formed via the dispersion of silicon in a resorcinol-formaldehyde (RF) gel followed by pyrolysis. Two silicon-carbon composite materials, carbon microspheres and nanofoams produced from nano-phase silicon impregnated RF gel precursors have been synthesized and investigated. Carbon microspheres are produced by forming the silicon-containing RF gel into microspheres whereas carbon nano-foams are produced by impregnating carbon fiber paper with the silicon containing RF gel to create a free standing electrode. 1-5 Both materials have demonstrated their ability to function as anodes and utilize the silicon present in the material. Stable reversible capacities above 400 mAh/g for the bulk material and above 1000 mAh/g of Si have been observed.

  9. Layered TiO2: PVK nano-composite thin films for photovoltaic applications. TiO2: PVK nano-composite thin films.

    Science.gov (United States)

    Kaune, G; Wang, W; Metwalli, E; Ruderer, M; Rossner, R; Roth, S V; Müller-Buschbaum, P

    2008-01-01

    The influence of the solvent used for spin-coating on the homogeneity of poly(N-vinylcarbazole) (PVK) films is investigated. Homogenous films are obtained only by the use of toluene, solution in tetrahydrofuran (THF) and chloroform results in radially oriented inhomogeneities and films prepared by use of N-methylpyrrolidone and dimethylacetamide show particle formation during spin-coating. Layered nano-composite thin films are prepared by spin-coating a PVK film on top of a nano-structured titanium dioxide ( TiO2) layer. The TiO2 thin films are prepared by a sol-gel process using an amphiphilic copolymer as structure-directing agent. Structural characterisation of the TiO2 :PVK nano-composite films is done by field emission scanning electron microscopy (FESEM) and grazing-incidence small-angle scattering (GISAXS). Bare TiO2 films are probed for comparison. Light is basically only absorbed in the ultraviolet regime and absorption slightly increases upon addition of PVK, which makes the layered TiO2 :PVK nano-composite thin films good candidates for UV photovoltaic devices. Furthermore, absorption remains stable over a period of several days.

  10. Study of rheological, viscoelastic and vulcanization behavior of sponge EPDM/NR blended nano- composites

    Science.gov (United States)

    Arshad Bashir, M.; Shahid, M.; Ahmed, Riaz; Yahya, A. G.

    2014-06-01

    In this research paper the effect of blending ratio of natural rubber (NR) with Ethylene Propylene Diene Monomer (EPDM) were investigated. Different samples of EPDM/NR ratio were prepared to study the variation of NR in EPDM on rheology, curing characteristics, tangent δ, and viscosity variation during vulcanization of sponge nano composites.The main aim of present research is to develop elastomeric based sponge composites with the blending ratio of base elastomers along with the carbon nano particles for high energy absorbing and damping applications. The curing characteristics, rheology and viscoelastic nature of the composite is remarkably influenced with the progressive blending ratio of the base elastomeric matrix.

  11. Novel nano-particles as fillers for an experimental resin-based restorative material.

    Science.gov (United States)

    Rüttermann, S; Wandrey, C; Raab, W H-M; Janda, R

    2008-11-01

    The purpose of this study is to compare the properties of two experimental materials, nano-material (Nano) and Microhybrid, and two trade products, Clearfil AP-X and Filtek Supreme XT. The flexural strength and modulus after 24h water storage and 5000 thermocycles, water sorption, solubility and X-ray opacity were determined according to ISO 4049. The volumetric behavior (DeltaV) after curing and after water storage was investigated with the Archimedes principle. ANOVA was calculated with p<0.05. Clearfil AP-X showed the highest flexural strength (154+/-14 MPa) and flexural modulus (11,600+/-550 MPa) prior to and after thermocycling (117+/-14 MPa and 13,000+/-300 MPa). The flexural strength of all materials decreased after thermocycling, but the flexural modulus decreased only for Filtek Supreme XT. After thermocycling, there were no significant differences in flexural strength and modulus between Filtek Supreme XT, Microhybrid and Nano. Clearfil AP-X had the lowest water sorption (22+/-1.1 microg mm(-3)) and Nano had the highest water sorption (82+/-2.6 microg mm(-3)) and solubility (27+/-2.9 microg mm(-3)) of all the materials. No significant differences occurred between the solubility of Clearfil AP-X, Filtek Supreme XT and Microhybrid. Microhybrid and Nano provided the highest X-ray opacity. Owing to the lower filler content, Nano showed higher shrinkage than the commercial materials. Nano had the highest expansion after water storage. After thermocycling, Nano performed as well as Filtek Supreme XT for flexural strength, even better for X-ray opacity but significantly worse for flexural modulus, water sorption and solubility. The performances of microhybrids were superior to those of the nano-materials.

  12. The influence of nano-ceramic modifier on the structure and properties of polyolefin composites

    Science.gov (United States)

    Sudnik, L.; Dubkova, V.; Galinovsky, A.; Osipkov, A.

    2016-10-01

    It has been shown, that the nano-ceramic modifier boehmite, with specific surface area of up to 400 m2/g and dispersion degree of less than100 nm, is a structurally active filler of an ultra-high-molecular-weight polyethylene. The boehmite influences the polymer crystalline and supra-molecular structure, during crystallization of the polymer from the melt under uniaxial plastic deformation conditions. It results in the production of nano-composites with an improved complex of properties.

  13. Carbon dioxide selective mixed matrix composite membrane containing ZIF-7 nano-fillers

    KAUST Repository

    Li, Tao

    2013-01-01

    Mixed matrix materials made from selective inorganic fillers and polymers are very attractive for the manufacturing of gas separation membranes. But only few of these materials could be manufactured into high-performance asymmetric or composite membranes. We report here the first mixed matrix composite membrane made of commercially available poly (amide-b-ethylene oxide) (Pebax®1657, Arkema) mixed with the nano-sized zeolitic imidazole framework ZIF-7. This hybrid material has been successfully deposited as a thin layer (less than 1μm) on a porous polyacrylonitrile (PAN) support. An intermediate gutter layer of PTMSP was applied to serve as a flat and smooth surface for coating to avoid polymer penetration into the porous support. Key features of this work are the preparation and use of ultra-small ZIF-7 nano-particles (around 30-35nm) and the membrane processability of Pebax®1657. SEM pictures show that excellent adhesion and almost ideal morphology between the two phases has been obtained simply by mixing the as-synthesized ZIF-7 suspension into the Pebax®1657 dope, and no voids or clusters can be observed. The performance of the composite membrane is characterized by single gas permeation measurement of CO2, N2 and CH4. Both, permeability (PCO2 up to 145barrer) and gas selectivity (CO2/N2 up to 97 and CO2/CH4 up to 30) can be increased at low ZIF- loading. The CO2/CH4 selectivity can be further increased to 44 with the filler loading of 34wt%, but the permeability is reduced compared to the pure Pebax®1657 membrane. Polymer chain rigidification at high filler loading is supposed to be a reason for the reduced permeability. The composite membranes prepared in this work show better performance in terms of permeance and selectivity when compared with asymmetric mixed matrix membranes described in the recent literature. Overall, the ZIF 7/Pebax mixed matrix membranes show a high performance for CO2 separation from methane and other gas streams. They are easy to

  14. Emerging boom in nano magnetic particle incorporated high-Tc superconducting materials and technologies - A South African perspective

    CSIR Research Space (South Africa)

    Srinivasu, VV

    2009-01-01

    Full Text Available With a strategy to establish and embrace the emerging nano particle incorporated superconductivity technology (based on the HTS materials and nano magnetic particles) in South Africa, the author has initiated the following research activity in South...

  15. EFFECT OF SURFACE SEALING ON STAIN RESISTANCE OF A NANO-HYBRID RESIN COMPOSITE*

    Directory of Open Access Journals (Sweden)

    Günçe SAYGI

    2015-04-01

    Full Text Available Purpose: This study investigated the influence of sealant application on stain resistance of a nanohybrid resin composite compared to the efficacy of a bonding agent used as a surface sealant on prolonging color stability of the resin composite. Materials and Methods: 28 disc-shaped materials were prepared from a nano-hybrid resin composite Filtek Z550 and assigned to four groups: G1K: nonsealed; G2:Adper Single Bond; G3: Fortify ; G4: Biscover LV. After 24 h storage in distilled water at 37˚C, all specimens were subjected to thermocycling and immersed into coffee solution. Color measurements were performed using spectrophotometer (VITA Easyshade; Vident according to CIEL*a*b* system. Results: Color change values were significantly different among the groups in each evaluation period except for after thermocycling (p<0.05. For 7 days evaluation period, the difference between G3 and G4 group was statistically significant while G4 exhibited statistically significant differences (p<0.05 and p<0.0001 respectively compared to control (G1 in 14 day whereas no significant difference was found between GI and GII in 28-day evaluation period. However, ΔE values of sealed specimens (GIII, GIV differed significantly from non-sealed (GI specimens after 28 days of immersion in coffee solution (p<0.05 and p<0.0001 respectively. Conclusion: It may be concluded that using a bonding agent as a surface sealant does not increase stain resistance of resin composites of the sealants evaluated. Biscover LV showed the highest efficacy to prolong color stability of the resin composite.

  16. 钯/多壁碳纳米管作为直接甲醇燃料电池阳极材料%Pd/Multi-walled Carbon Nano-tube Composite Used as Anode Materials for Direct Methanol Fuel Cell

    Institute of Scientific and Technical Information of China (English)

    徐洋洋; 董颖男; 徐明丽; 杨喜昆

    2011-01-01

    The functionalized multi-walled carbon nano-tubes (MWCNTs) were prepared on Pd nano-particles. The eletrocatalyst was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD). The catalytic activity for methanol oxidation in alkaline media was studied by cyclic voltammograms (CVs) and chronoamperometry. The results show that Pt nano-particles highly disperse on the MWCNTs surface. The Pd/MWCNTs catalyst exhibites high catalytic activity and stability. The Pd/MWCNTs catalyst has a promising application in alkaline direct methanol fuel cells (DMFC).%将Pd纳米颗粒负载在功能化的多壁碳纳米管(MWCNTs)上制备出Pd/MWCNTs催化剂.应用TEM、XRD对其进行表征,并利用循环伏安(CVs)、时间电流法检测其对碱性溶液中甲醇的催化活性.结果表明,Pd纳米颗粒高分散在功能化的多壁碳纳米管上,在碱性溶液中Pd/MWCNTs催化剂对甲醇显出了高的催化活性和稳定性.

  17. Material parameter identification on metal matrix composites

    CSIR Research Space (South Africa)

    Jansen van Rensburg, GJ

    2012-07-01

    Full Text Available Tests were done on the compressive behaviour of different metal matrix composite materials. These extremely hard engineering materials consist of ceramic particles embedded in a metal alloy binder. Due to the high stiffness and brittle nature...

  18. Design Novel 3D Nano Architectures for Developing Ultra Fast Thermal Energy Storage Materials

    Science.gov (United States)

    2015-04-30

    AFRL-AFOSR-UK-TR-2015-0036 Design novel 3D nano-architectures for developing ultra fast thermal energy storage materials...ultra fast thermal energy storage materials 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA8655-12-1-2014 5c. PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S...ANSI Std. Z39.18 FINAL TECHNICAL REPORT Project Title : Design novel 3D nano-architectures for developing ultra fast thermal energy storage

  19. Characterisation and cooperative antimicrobial properties of chitosan/nano-ZnO composite nanofibrous membranes.

    Science.gov (United States)

    Wang, Yan; Zhang, Qun; Zhang, Chen-Lu; Li, Ping

    2012-05-01

    Chitosan was combined with nano-ZnO to increase its antimicrobial activity, using polyvinyl alcohol as a support, and then were electronspun to form composite nanofibres. Through SEM, EDX and XRD observations, chitosan was seen to be able to incorporate nano-ZnO in the composite nanofibres. Escherichia coli, expressing recombinant enhanced green fluorescent protein, and Candida albicans were used to test the antimicrobial efficacy of the newly synthesised chitosan/nano-ZnO antimicrobial composite. The CdTe quantum dots were used to rapidly detect the residual changes of C. albicans and determine the end point of using antimicrobial agents. Minimal minimum inhibitory concentration (MIC), post-antibiotic effect and continuous agent effect of the composite were determined. The MIC of chitosan/nano-ZnO against C. albicans was 160μg/ml, close to the concentration of the treated composite with the lowest fluorescence intensity. The cell damage was observed by SEM, which indicated that nano-ZnO in the nanofibrous membranes played a cooperative role in the antimicrobial process of chitosan.

  20. Composite materials for battery applications

    Energy Technology Data Exchange (ETDEWEB)

    Amine, Khalil; Yang, Junbing; Abouimrane, Ali; Ren, Jianguo

    2017-03-14

    A process for producing nanocomposite materials for use in batteries includes electroactive materials are incorporated within a nanosheet host material. The process may include treatment at high temperatures and doping to obtain desirable properties.

  1. Study on Tribological Properties of Irradiated Crosslinking UHMWPE Nano-Composite

    Institute of Scientific and Technical Information of China (English)

    Lei Xiong; Dang-sheng Xiong; Jia-bo Jin

    2009-01-01

    Ultra High Molecular Weight Polyethylene (UHMWPE) has been widely used as a bearing material for artificial joint replacement over forty years. It is usually crosslinked by gamma rays irradiation before its implantation into human body. In this study, UHMWPE and UHMWPE/nano-hydroxyapatite (n-HA) composite were prepared by vacuum hot-pressing method. The prepared materials were irradiated by gamma rays in vacuum and molten heat treated in vacuum just after irradiation. The effect of filling n-HA with gamma irradiation on tribological properties of UHMWPE was investigated by using friction and wear experimental machine (model MM-200) under deionized water lubrication. Micro-morphology of wom surface was observed by metallographic microscope. Contact angle and hardness of the materials were also measured. The results show that contact angle and hardness are changed by filling n-HA and gamma irradiation. Friction coefficient and wear rate under deionized water lubrication are reduced by filling n-HA. While friction coefficient is increased and wear rate is reduced significantly by gamma irradiation. The worn surface of unfilled material is mainly characterized as adhesive wear and abrasive wear, and that of n-HA filled material is mainly characterized as abrasive wear. After gamma irradiation, the degrees of adhesive and abrasive wear for unfilled material and abrasive wear of n-HA filled material are significantly reduced. Unfilled and filled materials after irradiation are mainly shown as slight fatigue wear. The results indicate that UHMWPE and UHMWPE/n-HA irradiated at the dose of 150 kGy can be used as bearing materials in artificial joints for its excellent wear resistance compared to original UHMWPE.

  2. A novel approach in preparing polymer/nano-CaCO3 composites

    Institute of Scientific and Technical Information of China (English)

    Zhengying LIU; Runze YU; Mingbo YANG; Jianmin FENG; Wei YANG; Bo YIN

    2008-01-01

    An novel compounding process using nano-CaCO3 aqueous suspension for preparing polymer/ nano-CaCO3 composites with nanoparticles dispersed at the nanoscale is reported. The process is called the mild mixing method. In this method, the pre-dispersed nano-particle suspensions are blended with melting polymers in a weak shearing field using an extruder, followed by removing the water from the vent. The four typical poly-meric nanocomposites were prepared by mild mixing method. The dispersion of nano-CaCO3 in the matrix of the polymer at the nanoscale was confirmed by scanning electron microscopy (SEM). The molecular weights of polycarbonate (PC) and its nanocomposite showed that the degradation had not occurred during the mild mixing processing. The mechanical properties of the composite with 1.5 wt-% nano-CaCO3 improve slightly. It proved that this approach is suitable for the preparation of nano-composites based on both polar and non-polar polymers.

  3. Feasibility of Pb phytoextraction using nano-materials assisted ryegrass: Results of a one-year field-scale experiment.

    Science.gov (United States)

    Liang, Shu-Xuan; Jin, Yu; Liu, Wei; Li, Xiliang; Shen, Shi-Gang; Ding, Ling

    2017-04-01

    The effect of the combined application of nano-hydroxyapatite (NHAP) or nano-carbon black (NCB) on the phytoextraction of Pb by ryegrass was investigated as an enhanced remediation technique for soils by field-scale experiment. After the addition of 0.2% NHAP or NCB to the soil, temporal variation of the uptake of Pb in aboveground parts and roots were observed. Ryegrass shoot concentrations of Pb were lower with nano-materials application than without nano-materials for the first month. However, the shoot concentrations of Pb were significantly increased with nano-materials application, in particular NHAP groups. The ryegrass root concentrations of Pb were lower with nano-materials application for the first month. These results indicated that nano-materials had significant effects on stabilization of lead, especially at the beginning of the experiment. Along with the experimental proceeding, phytotoxicity was alleviated after the incorporation of nano-materials. The ryegrass biomass was significantly higher with nano-materials application. Consequently, the Pb phytoextraction potential of ryegrass significantly increased with nano-materials application compared to the gounps without nano-materials application. The total removal rates of soil Pb were higher after combined application of NHAP than NCB. NHAP is more suitable than NCB for in-situ remediation of Pb-contaminated soils. The ryegrass translocation factor exhibited a marked increase with time. It was thought that the major role of NHP and NBA might be to alleviate the Pb phytotoxicity and increase biomass of plants.

  4. Clues for biomimetics from natural composite materials

    Science.gov (United States)

    Lapidot, Shaul; Meirovitch, Sigal; Sharon, Sigal; Heyman, Arnon; Kaplan, David L; Shoseyov, Oded

    2013-01-01

    Bio-inspired material systems are derived from different living organisms such as plants, arthropods, mammals and marine organisms. These biomaterial systems from nature are always present in the form of composites, with molecular-scale interactions optimized to direct functional features. With interest in replacing synthetic materials with natural materials due to biocompatibility, sustainability and green chemistry issues, it is important to understand the molecular structure and chemistry of the raw component materials to also learn from their natural engineering, interfaces and interactions leading to durable and highly functional material architectures. This review will focus on applications of biomaterials in single material forms, as well as biomimetic composites inspired by natural organizational features. Examples of different natural composite systems will be described, followed by implementation of the principles underlying their composite organization into artificial bio-inspired systems for materials with new functional features for future medicine. PMID:22994958

  5. Gold and Hydroxyapatite Nano-Composite Scaffolds for Anterior Cruciate Ligament Reconstruction: In Vitro Characterization.

    Science.gov (United States)

    Smith, S E; White, R A; Grant, D A; Grant, S A

    2016-01-01

    Current anterior cruciate ligament (ACL) graft replacement materials often fail due to the lack of biological integration. While many newly developed extracellular matrix based scaffolds show good biocompatibility they often do not entice cellular remodeling and the rebuilding of a functional ligament. We have proposed the conjugation of gold nanoparticles (AuNP) and hydroxyapatite nanoparticles (nano-HAp) to acellular tissue to enhance cell attachment and proliferation while maintaining an improved degradation resistance and open microstructure. We are the first to investigate the double conjugation of AuNP and nano-HAp onto decellularized tissue to improve the tissue remodeling response. Decellularized porcine diaphragm was crosslinked with two types of nano-HAp and amine-functionalized AuNP with 1-ethyl-3-(3-dimethlaminopropyl) carbodiimide (EDC) crosslinker. Scaffolds were characterized using electron microscopy, differential scanning calorimetry, and fibroblast assays. Results demonstrated that scaffolds with nano-HAp have increased thermal stability at low levels of crosslinking. The open microstructure of the scaffold was not compromised allowing for cell migration while still providing increased degradation resistance. The addition of nano-HAp decreased cell viability compared to scaffolds without nanoparticles, but the addition of AuNP to scaffolds showed enhanced cell viability in the presence of nano-HAp. The addition of nano-HAp showed an increase in cell viability compared to scaffolds crosslinked without nanoparticles. It is concluded that attaching AuNP and nano-HAp to extracellular matrices may improve overall properties.

  6. Spectral absorption of unpolarized light through nano-materials in the absence of a magnetic field

    Directory of Open Access Journals (Sweden)

    Luminosu I.

    2008-01-01

    Full Text Available A study of optical properties, such as light absorption, of a colloidal nano-material, provides information on the biphasic, solid - liquid system microstructure. The nano-material under study is a magnetic liquid (ferrofluid. The disperser agent is petroleum mineral oil and the dispersed material is a brown spar powder (nano-particles. The stabilizer is oleic acid. Light absorption through ferrofluid samples reveals the tendency of solid particles in a colloidal solution to form aggregates. The paper emphasizes the linear dependence between the spectral absorption coefficient, concentration and wavelength. The aggregates cause deviations of the extinction coefficient from values according to the Bouger-Lambert-Beer law. Fe3O4 aggregates sized 58.76 nm are formed in the system. The average number of nano-particles forming aggregates is 6. The magnetic liquid to be studied is secure stable and, thus, trustful in technological and biological applications.

  7. Preparation and characterization of Zn/Ce/SO42--doped titania nano-materials with antibacterial activity

    Science.gov (United States)

    Wang, Yuzheng; Xue, Xiangxin; Yang, He; Luan, Che

    2014-02-01

    SO42--doped Zn/Ce/TiO2 nano-materials (Zn/Ce/SO42-/TiO2) were prepared by a sol-gel method. The structures of Zn/Ce/SO42-/TiO2 nano-materials were characterized by Transmission electron microscope (TEM), X-ray diffraction (XRD), atomic absorption spectroscopy (AAS), X-ray photoelectron spectroscopy (XPS), X-ray photoelectron (PL) spectroscopy and Fourier transform infrared spectroscopy (FT-IR). Gram-negative Escherichia coli (ATCC25922) and Gram-positive Staphylococcus aureus (ATCC6538) as model organisms, antibacterial activities of nano-materials were tested using inhibition zone method and shaking flask method under visible light irradiation and in the dark. The results show that the materials crystal structure and elemental composition are changed after SO42- doped. Zn/Ce/SO42-/TiO2 exhibit predominant antibacterial activity in the dark and visible light irradiation. The action mechanism of Zn/Ce/SO42-/TiO2 is discussed.

  8. Composite, nanostructured, super-hydrophobic material

    Science.gov (United States)

    D'Urso, Brian R.; Simpson, John T.

    2007-08-21

    A hydrophobic disordered composite material having a protrusive surface feature includes a recessive phase and a protrusive phase, the recessive phase having a higher susceptibility to a preselected etchant than the protrusive phase, the composite material having an etched surface wherein the protrusive phase protrudes from the surface to form a protrusive surface feature, the protrusive feature being hydrophobic.

  9. Electrodeposition and Corrosion Resistance Properties of Zn-Ni/TiO2 Nano composite Coatings

    Directory of Open Access Journals (Sweden)

    B. M. Praveen

    2011-01-01

    Full Text Available Nano sized TiO2 particles were prepared by sol-gel method. TiO2 nano particles were dispersed in zinc-nickel sulphate electrolyte and thin film of Zn-Ni-TiO2 composite was generated by electrodeposition on mild steel plates. The effect of TiO2 on the corrosion behavior and hardness of the composite coatings was investigated. The film was tested for its corrosion resistance property using electrochemical, weight loss, and salt spray methods. The paper revealed higher resistance of composite coating to corrosion. Microhardness of the composite coating was determined. Scanning electron microscope images and X-ray diffraction patterns of coating revealed its fine-grain nature. Average crystalline size of the composite coating was calculated. The anticorrosion mechanism of the composite coating was also discussed.

  10. Dielectric behaviour of nano-crystalline spinel Ni0.2Ca0.8Fe2O4 and their nano-composite with polypyrrole

    Indian Academy of Sciences (India)

    Arun S Prasad; S N Dolia; P Predeep

    2011-12-01

    The spinel ferrite nano-particles of chemical composition Ni0.2Ca0.8Fe2O4 have been prepared by sol–gel method. Subsequently, the nanoparticles are encapsulated with the intrinsically conducting polymer shell of polypyrrole. The X-ray diffraction patterns confirm the single phase cubic spinel structure of the materials. To understand the dielectric properties of the materials, frequency-dependent dielectric measurement has been performed at 300 K in the range of 100 mHz to 2 MHz. On polymerization, both the dielectric strength as well the dielectric loss is significantly increased. Also, the dielectric conductivity, which arises from the electron hopping mechanism, is considerably increased on polymerization.

  11. Microstructure and properties of heavily deformed Cu-Ag-Ce in situ nano-filamentary composite

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Xiao-hui; YAN; Lin; NING; Yuan-tao

    2005-01-01

    The microstructure and properties of heavily deformed Cu-Ag-Ce in situ nano-filamentary composite were studied in this paper. As cast, copper matrixes were dendritic and Ag-rich phases, some of which present spheroidizing tendency, were embedded in Cu dentritic arms. After heavily deforming, Agrich phases develop into fibers: the thick fibers with a size of more than 50 nm and the thin ones with a size of less than 30 nm. Strengthening of Cu-Ag-Ce in situ nano-filamentary composite could be divided into two stages and the combination of different strength and conductivity could be obtained through controlling reducing area, intermediate heat treatment and stabilizing treatment. The results revealed that heavily deformed Cu-Ag-Ce in situ nano-filamentary composite had high strength ( > 1.5GPa) and high conductivity(>65 %IACS).

  12. Removing Cd2+ by Composite Adsorbent Nano-Fe3O4/Bacterial Cellulose

    Institute of Scientific and Technical Information of China (English)

    LU Min; GUAN Xiao-hui; WEI De-zhou

    2011-01-01

    A new composite adsorbent,nano-Fe3O4/bacterial cellulose(BC),was prepared through blending method.The process of adsorbing Cd2+ including its isotherm and kinetics measured was studied.The results show that the adsorption efficiency is improved because of huge surface area and surface coordination of nano-Fe3O4 particles.Its adsorption capacity is 27.97 mg/g and the maximum of Cd2+ removal is 74%.The adsorption kinetics can be described by pseudo-second rate model and the adsorption equilibrium by Langmuir type.The superparamagnetism of nano-Fe3O4 particles can help to solve the difficult separation of single BC adsorbent and lead to the quick separation of composite adsorbent from the liquid if a magnetic field was applied.Cd2+ can be desorbed effectively by EDTA and HCl from the composite adsorbent,which can make it be reused.

  13. Composite Dielectric Materials for Electrical Switching

    Energy Technology Data Exchange (ETDEWEB)

    Modine, F.A.

    1999-04-25

    Composites that consist of a dielectric host containing a particulate conductor as a second phase are of interest for electrical switching applications. Such composites are "smart" materials that can function as either voltage or current limiters, and the difference in fimction depends largely upon whether the dielectric is filled to below or above the percolation threshold. It also is possible to combine current and voltage limiting in a single composite to make a "super-smart" material.

  14. Friction material composites copper-metal-free material design perspective

    CERN Document Server

    Sundarkrishnaa, K L

    2015-01-01

    This book examines material composites used in connection with brake friction, their design and safety. To aid in understanding, the essentials of friction are explained. This second edition was extended to include friction material composites without copper, as they offer an environmentally friendlier option. The second edition is intended to support beginners by offering insights into the essentials of friction material composites, helping them to develop a broader understanding of brake friction materials. Friction materials find wide-ranging applications in household and industrial appliances, brake pads for automotive applications, rail brake friction pads and composition brake blocks. This second edition is an introductory volume to a set of related books, and is based on the author’s experience and expertise with various material manufacturers, brake manufacturers, vehicle manufacturers, researchers and testing labs around the world with which the author has been associated for the past 28 years.

  15. The Influence of Nano-Fe3O4 on the Microstructure and Mechanical Properties of Cementitious Composites

    Science.gov (United States)

    Sikora, Pawel; Horszczaruk, Elzbieta; Cendrowski, Krzysztof; Mijowska, Ewa

    2016-04-01

    In the last decade, nanotechnology has been gathering a spectacular amount of attention in the field of building materials. The incorporation of nanosized particles in a small amount to the building materials can influence their properties significantly. And it can contribute to the creation of novel and sustainable structures. In this work, the effect of nano-Fe3O4 as an admixture (from 1 to 5 wt.% in mass of the cement) on the mechanical and microstructural properties of cementitious composites has been characterised. The study showed that Fe3O4 nanoparticles acted as a filler which improved the microstructure of a cementitious composite and reduced its total porosity, thus increasing the density of the composite. The presence of nanomagnetite did not affect the main hydration products and the rate of cement hydration. In addition, the samples containing nanomagnetite exhibited compressive strength improvement (up to 20 %). The study showed that 3 wt.% of nano-Fe3O4 in the cementitious composite was the optimal amount to improve both its mechanical and microstructural properties.

  16. Shear bond strength between porcelain and nano filler composite resin with or without 9% hydrofluoric acid etching

    Directory of Open Access Journals (Sweden)

    Kun Ismiyatin

    2009-06-01

    Full Text Available Background: Reparation technique on restorations with broken or damaged porcelain which are still attached with the teeth are difficult, because it is very hard to remove the porcelain restoration without damaging it, and it needs a long time. Various ways have been developed to repair the broken porcelain, one of them is the use of composite resin as the material for the restoration of fractured porcelain. Repairing porcelain inside the mouth without removing the restoration of the damaged porcelain using light cured composite resins material seems to be an advantageous option because it is relatively simple, has low risks, good esthetically and cheap. Purpose: The objective of this study was to find out the difference of shear bond strength in porcelain reparation using nano filler composite resin with or without 9% hydrofluoric acid etching by using Autograph measuring device. Methods: Twenty pieces of the porcelain samples devided into 2 groups. Group I: etching process using 9% hydrofluoric acid, and group II : without etching process. Result: The data was analyzed using t test in a p value of 0.0001 (p≤0.05, which means there is a significant different of shear bond strength between treated group I and II. The biggest shear bond strength was in treatment group I. Conclusion: The use of 9% hydrofluoric acid on the surface of porcelain can increase the shear bond strength between porcelain and nano filler composite resin.

  17. PLGA/Nano-ZnO Composite Particles for Use in Biomedical Applications: Preparation, Characterization, and Antimicrobial Activity

    Directory of Open Access Journals (Sweden)

    Ana Stanković

    2016-01-01

    Full Text Available Copolymer poly (DL-lactide-co-glycolide (PLGA is extensively investigated for various biomedical applications such as controlled drug delivery or carriers in the tissue engineering. In addition, zinc oxide (ZnO is widely used in biomedicine especially for materials like dental composites, as a constituent of creams for the treatment of a variety of skin irritations, to enhance the antibacterial activity of different medicaments and so on. Uniform, spherical ZnO nanoparticles (nano-ZnO have been synthesized via microwave synthesis method. In addition to obtaining nano-ZnO, a further aim was to examine their immobilization in the PLGA polymer matrix (PLGA/nano-ZnO and this was done by a simple physicochemical solvent/nonsolvent method. The samples were characterized by X-ray diffraction, scanning electron microscopy, laser diffraction particle size analyzer, differential thermal analysis, and thermal gravimetric analysis. The synthesized PLGA/nano-ZnO particles are spherical, uniform, and with diameters below 1 µm. The influence of the different solvents and the drying methods during the synthesis was investigated too. The biocompatibility of the samples is discussed in terms of in vitro toxicity on human hepatoma HepG2 cells by application of MTT assay and the antimicrobial activity was evaluated by broth microdilution method against different groups of microorganisms (Gram-positive bacteria, Gram-negative bacteria, and yeast Candida albicans.

  18. Composites and blends from biobased materials

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, S.S. [National Renewable Energy Laboratory, Golden, CO (United States)

    1995-05-01

    The program is focused on the development of composites and blends from biobased materials to use as membranes, high value plastics, and lightweight composites. Biobased materials include: cellulose derivative microporous materials, cellulose derivative copolymers, and cellulose derivative blends. This year`s research focused on developing an improved understanding of the molecular features that cellulose based materials with improved properties for gas separation applications. Novel cellulose ester membrane composites have been developed and are being evaluated under a collaborative research agreement with Dow Chemicals Company.

  19. Investigation on multiple-melting behavior of nano-CaCO3/polypropylene composites

    Institute of Scientific and Technical Information of China (English)

    LIN Zhidan; ZENG Chunlian; MAI Kancheng

    2007-01-01

    The multiple melting-peak behavior of polypropylene (PP) in nano-CaCO3/PP composites and modified nano-CaCO3/PP composites were investigated under the condition of isothermal crystallization and nonisothermal crystallization.The result indicated that the addition ofnano-CaCO3 markedly increased the crystallization temperatures of PP and induced the formation of the p-crystal of PP.The crystallization temperatures of nano-CaCO3/PP composites modified by reactive monomers were further increased,but the melting-peak intensity of the 13-crystal of PP was not greatly influenced.While in the presence of dicumyl peroxide,nanoCaCO3/PP composites modified by reactive monomers led to the significant increase in the melting-peak intensity of the β-crystal of PP.The double melting-peak of PP was observed,which was attributed to the formation of two kinds of different crystallization forms of or-crystal or β-crystal during the crystallization of PP.With the increase of crystallization temperatures,the double melting-peak moved toward the hightemperature side.The intensity of high-temperature melting peak was higher than that of low-temperature melting peak in nano-CaCO3/PP composites.While in modified nano-CaCO3/PP composites crystallized at higher temperature,the intensity of high-temperature melting peak was lower than that of low-temperature melting peak.The isothermal crystallization time had little effect on the melting temperatures.

  20. [Study on preparation of composite nano-scale Fe3O4 for phosphorus control].

    Science.gov (United States)

    Li, Lei; Pan, Gang; Chen, Hao

    2010-03-01

    Composite nano-scale Fe3O4 particles were prepared in sodium carboxymethyl cellulose (CMC) solution by the oxidation deposition method. The adsorptions of phosphorus by micro-scale Fe3O4 and composite nano-scale Fe3O4 were investigated in water and soil, and the role of cellulase in the adsorption of composite nano-scale Fe3O4 was studied. Kinetic tests indicated that the equilibrium adsorption capacity of phosphorous on the composite nano-scale Fe3O4 (2.1 mg/g) was less than that of micro-scale Fe3O4 (3.2 mg/g). When cellulase was added to the solution of composite nano-scale Fe3O4 to degrade CMC, the removal rate of P by the nanoparticles (86%) was enhanced to the same level as the microparticles (90%). In the column tests, when the composite nano-scale Fe3O4 suspension was introduced in the downflow mode through the soil column, 72% of Fe3O4 penetrated through the soil bed under gravity. In contrast, the micro-scale Fe3O4 failed to pass through the soil column. The retention rate of P was 45% in the soil column when treated by the CMC-stabilized nanoparticles, in comparison with only 30% for the untreated soil column, however it could be improved to 74% in the soil column when treated by both the CMC-stabilized nanoparticles and cellulase, which degraded CMC after the nanoparticles were delivered into the soil.

  1. Improvement of mechanical and thermal properties of high energy electron beam irradiated HDPE/hydroxyapatite nano-composite

    Science.gov (United States)

    Mohammadi, M.; Ziaie, F.; Majdabadi, A.; Akhavan, A.; Shafaei, M.

    2017-01-01

    In this research work, the nano-composites of high density polyethylene/hydroxyapatite samples were manufactured via two methods: In the first method, the granules of high density polyethylene and nano-structure hydroxyapatite were processed in an internal mixer to prepare the nano-composite samples with a different weight percentage of the reinforcement phase. As for the second one, high density polyethylene was prepared in nano-powder form in boiling xylene. During this procedure, the hydroxyapatite nano-powder was added with different weight percentages to the solvent to obtain the nano-composite. In both of the procedures, the used hydroxyapatite nano-powder was synthesized via hydrolysis methods. The samples were irradiated under 10 MeV electron beam in 70-200 kGy of doses. Mechanical, thermal and morphological properties of the samples were investigated and compared. The results demonstrate that the nano-composites which we have prepared using nano-polyethylene, show better mechanical and thermal properties than the composites prepared from normal polyethylene granules, due to the better dispersion of nano-particles in the polymer matrix.

  2. Fracture Toughness Evaluation of Hybrid and Nano-hybrid Resin Composites after Ageing under Acidic Environment

    Directory of Open Access Journals (Sweden)

    Ferooz M

    2015-03-01

    Full Text Available Statement of Problem: Tooth-coloured restorative materials are brittle with the major shortcomings of sensitivity to flaws and defects. Although various mechanical properties of resin composites have been studied, no fracture toughness test data for nano-hybrid composites under acidic condition for a long period of time has been published. Objectives: To compare the fracture toughness (KIc of two types of resin composites under tensile loading and to assess the effect of distilled water and lactic acid on the resistance of the restoratives to fracture after three months of immersion. Materials and Methods: Four resin composites were used: three nanohybrids [EsteliteSigma Quick (Kuraray, Luna (SDI, Paradigm (3M/ESPE] and one hybrid, Rok (SDI. The specimens were prepared using a custom-made polytetrafluorethylene split mould, stored in distilled water (pH 6.8 or 0.01mol/L lactic acid (pH 4 and conditioned at 37°C for 24 hours, 1 or 3 months. They were loaded under tensile stress using a universal testing machine; the maximum load (N to the specimen failure was recorded and the fracture toughness (KIc was calculated. Data were analysed by ANOVA and Tukey’s test using SPSS, version 18. Results: The results of two-way ANOVA did not show a significant combined effect of material, time, and storage medium on fracture toughness (p= 0.056. However, there was a strong interaction between materials and time (p=0.001 when the storage medium were ignored. After 24 h of immersion in distilled water, Paradigm revealed the highest KIc values followed by Rok, Luna and Estelite. Immersion in either distilled water or lactic acid significantly decreased the fracture toughness of almost all materials as time interval increased. Conclusions: Paradigm showed the highest fracture toughness followed by Rok, Luna and Estelite respectively. As time increased, KIc significantly decreased for almost all resin composites except for Luna which showed a slight decrease

  3. Experimental and numerical characterization of scalable cellulose nano-fiber composite

    Science.gov (United States)

    Barari, Bamdad

    Fiber-reinforced polymer composites have been used in recent years as an alternative to the conventional materials because of their low weight, high mechanical properties and low processing temperatures. Most polymer composites are traditionally made using reinforcing fibers such as carbon or glass fibers. However, there has been recent interest in making these reinforcing fibers from natural resources. The plant-derived cellulose nano-fibers (CNF) are a material with remarkable mechanical properties at the nano-scale that are much superior to the mechanical properties of the traditional natural fibers (such as jute, hemp, kenaf, etc) used in the natural-fiber based polymer composites. Because CNF is bio-based and biodegradable, it is an attractive 'green' alternative for use in automotive, aerospace, and other engineering applications. However, efforts to produce CNF based nano-composites, with successful scaling-up of the remarkable nanoscale properties of CNF, have not met with much success and form an active area of research. The main goals of this research are to characterize the scalable CNF based nano composites using experimental methods and to develop effective models for flow of polymeric resin in the CNF-based porous media used during the proposed manufacture of CNF nano-composites. In the CNF composite characterization section, scalable isotropic and anisotropic CNF composites were made from a porous CNF preforms created using a freeze drying process. Formation of the fibers during freeze-drying process can change the micro skeleton of the final preform structure as non-aligned or isotropic and aligned or anisotropic CNF. Liquid Composite Molding (LCM) processes form a set of liquid molding technologies that are used quite commonly for making the conventional polymer composites. An improvised vacuum-driven LCM process was used to make the CNF-based nanocomposites from CNF preforms using a 'green' epoxy resin with high bio-content. Under the topic of

  4. Compositional analysis in the nano-regime:A SIMS perspective

    Institute of Scientific and Technical Information of China (English)

    Subhendu Sarkar; Purushottam Chakraborty

    2005-01-01

    A serious problem in secondary ion mass spectrometry (SIMS) analysis is its "matrix effect" that hinders the quantification of a certain species in a sample and consequently, appropriate corrective measures are taken to calibrate the secondary ion currents into respective concentrations for accurate compositional analysis. Use of "calibration standards" is necessary for this purpose. Detection of molecular MCsn+ ions (M-element to be analyzed, n=1, 2, 3,....) under Cs+ ion bombardment is a possible mean to minimize such matrix effect, enabling one to quantify without the need of calibration standards. Our recent studies on MCsn+ molecular ions aim towards the understanding of their formation mechanisms, which are important to know their effects on SIMS quantification.In-depth quantitative analysis is a major strength of SIMS for which 'depth resolution' is of significant relevance. The optimal choice of the impact parameters during SIMS analyses can play an effective role in obtaining data with ultra-high depth resolution. SIMS is possible at depth resolution in the nm or even sub-nm range, with quantifiable data obtained from the top monolayer onwards into the material. With optimized experimental conditions, like extremely low beam current (down to ~10 nA), and low bombarding energy (below 1 keV), ultra-high depth resolution SIMS has enabled interfacial composition analysis of ultra-thin films, quantum wells, heterostructures, etc. and complex low-dimensional structures with high precision and repeatability.

  5. Preparation and properties of PVAc-nano-OMMT/PP-EVA composite%PVAc-nano-OMMT/PP-EVA复合材料的制备与性能

    Institute of Scientific and Technical Information of China (English)

    刘玲; 郭海福; 曾幸荣; 赖学军

    2011-01-01

    利用乳液聚合法引发醋酸乙烯酯(VAc)在有机蒙脱土(OMMT)中原位插层聚合,与聚丙烯(PP)-乙烯-醋酸乙烯酯共聚物(EVA)复合体系熔融共挤制备出PVAe-nano-0MMT/PP-EVA复合材料.X射线衍射(XRD)与透射电镜(TEM)测试结果表明,在强剪切作用下,PVAc-nano-OMMT/PP-EVA形成了剥离型纳米复合材料结构;热失重(TGA)测试结果显示PVAc-nano-OMMT/PP-EVA的起始分解温度明显高于PP-EVA和nanoOMMT/PP-EVA,PVAc-nano-OMMT的存在使材料的热性能得以改善;在PVAc-nano-OMMT/PP-EVA共混物中,PVAc-nano-OMMT具有明显的增韧作用;通过氧指数(LOI)和锥形量热(CONE)测试,PVAe-nano-OMMT/PP-EVA的氧指数为24.1%,可较大幅度地降低材料燃烧的热释放程度、有效燃烧热和烟释放过程,阻燃性能提高.%The in suit intercalated polymerization of vinyl acetate (VAc) and organophilic montmorillonite (OMMT) was initiated via emulsion polymerization and obtained polyvinylacetate (PVAc)-nano-OMMT hybrid.Twofold blend composed of PVAc-nano-OMMT/PP-EVA was prepared by twin-screw extruder way, and X-ray diffraction (XRD) result shows that the structure of PVAc-nano-OMMT/PP-EVA is be treated as exfoliated nanocomposite structure during application of higher shear stress to system, and transmission electron microscopy (TEM) observation gives the same result directly. Thermo gravimetric analysis (TGA) results show that the initial decomposition temperature of PVAc-nano-OMMT/PP-EVA is greater than that of PP-EVA and nano-OMMT/PP-EVA, the existence of PVAc-nano- OMMT makes composite better thermal stability. In the PVAc- nanoOMMT/PP-EVA composite, PVAc-nano-OMMT has better toughness. Limiting oxygen index (LOI) and cone calorimeter test indicate that LOI of PVAc-nano-OMMT/PP-EVA is 24. 1%, and has lower heat release rate,effective heat of combustion, smoke release course, and better flame retardancy.

  6. Chemical composition of nanomodified composite binder with nano- and microsized barium silicate

    Directory of Open Access Journals (Sweden)

    KOROLEV Evgenij Valerjevich

    2014-08-01

    Full Text Available There are several possibilities to improve cement-based binders. In particular, many properties of cement stone can be enhanced by means of micro- and nanoscale modification. In a number of previous works we had shown that application of barium hydrosilicates leads to such improvement. The present article is devoted to the investigation of the chemical composition of the cement stone which is modified by means of addition of barium hydrosilicates. The modification was performed on different scales: micro- and nanoscale; the results of simultaneous multi-scale modification are also presented. The examination was carried out with help of different modern research techniques – FT IR spectroscopy, differential thermal analysis and X-ray phase analysis. Identification of the new phases and comparative quantitative assessment of their content are performed. It is found that the use of nano- and micro-sized barium hydrosilicates as additives leads to reduction of portlandite by 27...28%; by means of multi-scale modification it is possible to reduce the content of portlandite much more (by 83.3%. Due to addition of nano- and micro-sized barium-based modifiers both the amount of calcium hydrosilicates in reaction products is enlarged, and structure of the mentioned hydrosilicates is changed (the formation of a fine-grained structure of hydration products takes place. Micro-sized barium hydrosilicates are chemically active additives and promote the formation of an additional quantity of calcium hydrosilicates of type CSH (I. The use of nanoscale barium hydrosilicates promotes the formation of CSH (I and CSH (II calcium hydrosilicates, and also both riversidite and xonotlite. As a result of simultaneous application of nano- and micro-sized barium hydrosilicates the content of CSH (II increases. This can be confirmed by means of differential thermal and X-ray analysis. The amount of CSH (I, riversidite and various tobermorites is also increases. It is

  7. The use of nano-sized acicular material, sliding friction, and antisense DNA oligonucleotides to silence bacterial genes

    OpenAIRE

    2014-01-01

    Viable bacterial cells impaled with a single particle of a nano-sized acicular material formed when a mixture containing the cells and the material was exposed to a sliding friction field between polystyrene and agar gel; hereafter, we refer to these impaled cells as penetrons. We have used nano-sized acicular material to establish a novel method for bacterial transformation. Here, we generated penetrons that carried antisense DNA adsorbed on nano-sized acicular material (α-sepiolite) by prov...

  8. Understanding and Quantifying the Reactivity of Energetic NanoParticles and NanoComposites

    Science.gov (United States)

    2015-01-05

    C. Wu, , G. Jian,, L. Zhou, M. R. Zachariah . Encapsulation of Perchlorate Salts within Metal Oxides for Application as Nano-Energetic Oxidizers...Conduct bulk powder measurements in combustion bombs and wires to extract combustion time scales and the role of mixtures and stiochometry on burning...in the reaction. Experiments also conducted for neat Al, CuO, Fe2O3 and ZnO powders show that the oxygen are produced by decomposition of oxidizer

  9. Nuclear magnetic resonance applied to the study of polymeric nano composites; Ressonancia magnetica nuclear aplicada do estudo de nanocompositos polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Tavares, Maria Ines Bruno [Instituto de Macromoleculas Professora Eloisa Mano da Universidade Federal do Rio de Janeiro, UFRJ - RJ (Brazil)

    2011-07-01

    Polymers and nanoparticles based nano composites were prepared by intercalation by solution. The obtained nano composites were characterized mainly by the nuclear magnetic spectroscopy (NMR), applying the analysis of carbon-13 (polymeric matrix), silicon-29 (nanoparticle), and by determination of spin-lattice relaxation of the hydrogen nucleus (T{sub 1}H) (polymeric matrix). The NMR have presented a promising technique in the characterization of the nano charge dispersion in the studied polymeric matrixes.

  10. Evaluating the Microshear Bond Strength and Microleakage of Flowable Composites Containing Zinc Oxide Nano-particles

    Science.gov (United States)

    Teymoornezhad, Koorosh; Alaghehmand, Homayoun; Daryakenari, Ghazaleh; Khafri, Soraya; Tabari, Mitra

    2016-01-01

    Introduction Preventive resin restorations (PRR) are the conservative choice for the most common carious lesions in children. Thus, new age flowable resin composites with higher filler content are readily used. The aim of this study was to evaluate the microshear bond strength and microleakage of two flowable resin composites containing different percentages of nano zinc oxide (NZnO) particles, which have proven to have antimicrobial properties. Methods This experimental in-vitro study was carried out in the Dental Material Research Center of Babol University of Medical Sciences in 2015. One nanohybrid and one nanofill flowable resin composite were chosen and modified with the incorporation of 1% and 3% Wt NZnO particles. Six groups (n=10, 0%, 1%, and 3%) of resin composite sticks on dental enamel (2×2mm) were prepared to be placed in the microtensile tester. The microshear bond strength magnitude (MPa) was recorded at the point of failure. A class I box (3×0.8×1 mm) was prepared on 60 premolars and filled using the resin composites (6 groups, n=10). The specimens were immersed in a 5% basic fuschin solution and sectioned bucco-lingually to view the microleakage using a stereomicroscope. One-way ANOVA and Tukey tests for microshear and Wilcoxon and Kruskal–Wallis tests for microleakage were used to analyze the data in the IBM SPSS Statistics version 22 software. Results The bond strength of the 3% clearfill group significantly decreased while no significant change occurred in the bond strength in other groups. The Z-350 group had significantly lower microleakage as nanoparticles increased. No significant difference was observed in the clearfill group. Conclusion Up to 3% Wt incorporation of NZnO particles will not diversely alter the bond strength, but it will be beneficial in providing antimicrobial effects with lower microleakage rates. PMID:28070263

  11. Processing and applications of carbon based nano-materials

    Science.gov (United States)

    Yu, Aiping

    Carbon-based nanomaterials, including single walled carbon nanotubes (SWNTs) and graphite nanoplatelets (GNPs, multi-layer graphene), possess exceptional electrical, thermal and mechanical properties coupled with high aspect ratio and high temperature stability. These unique properties have attracted increased attention during the past decade. These materials form the basis of the work presented here, which includes research targeting fabrication, processing and applications in new composites and devices. As-prepared SWNTs are typically contaminated with amorphous carbon as well as metal catalyst and graphitic nanoparticles. We have demonstrated an efficient approach for removing most of these impurities by the combination of nitric acid treatment and both low speed (2000 g) and high speed centrifugation (20,000 g). This approach gives rise to the highest-purified arc-discharge SWNTs which are almost free from impurities, and in addition are left in a low state of aggregation. The new purification process offers a convenient way to obtain different grade of SWNTs and allows the study of the effect purity on the thermal conductivity of SWNT epoxy composite. Purified functionalized SWNTs provide a significantly greater enhancement of the thermal conductivity, whereas AP-SWNTs allow the best electrical properties because of their ability to form efficient percolating network. We found that purified SWNTs provide ˜5 times greater enhancement of the thermal conductivity than the impure SWNT fraction demonstrating the significance of SWNTs quality for thermal management. The introduced GNPs have directed the thermal management project to a new avenue due to the significant improvement of the thermal conductivity of the composites in comparison with that of SWNTs. A novel process was demonstrated to achieve a 4-graphene layer structure referred to GNPs with a thickness of ˜2 nm. This material was embedded in an epoxy resin matrix and the measured thermal conductivity of

  12. Polymer Matrix Composite Material Oxygen Compatibility

    Science.gov (United States)

    Owens, Tom

    2001-01-01

    Carbon fiber/polymer matrix composite materials look promising as a material to construct liquid oxygen (LOX) tanks. Based on mechanical impact tests the risk will be greater than aluminum, however, the risk can probably be managed to an acceptable level. Proper tank design and operation can minimize risk. A risk assessment (hazard analysis) will be used to determine the overall acceptability for using polymer matrix composite materials.

  13. Synthesizing Smart Polymeric and Composite Materials

    OpenAIRE

    2013-01-01

    Smart materials have been widely investigated to explore new functionalities unavailable to traditional materials or to mimic the multifunctionality of biological systems. Synthetic polymers are particularly attractive as they already possess some of the attributes required for smart materials, and there are vast room to further enhance the existing properties or impart new properties by polymer synthesis or composite formulation. In this work, three types of smart polymer and composites have...

  14. Synthesis and study of MPNS/SMA nano-composite tanning agent

    Institute of Scientific and Technical Information of China (English)

    Hui Pan; Mei Qi; Zhi Jun Zhang

    2008-01-01

    The radical polymerization of maleic anhydride (MA),styrene (ST) with the vinyl groups introduced onto the surface of the nano-sized silica via solution polymerization method was developed.The methacryloxypropyl nano-sized silica (MPNS) was used as macromonomer and polymerized with maleic anhydride and styrene by initiating with BPO in toluene.The structure and properties of MPNS/SMA nano-composite were characterized by FT-IR spectra and TEM.Meanwhile,it was applied as tanning agent compared with the traditional styrene-maleic anhydride copolymer in leather.It was found that the applied leather had better quality characteristics with the addition of the nano-sized silica.

  15. Composite Materials for Low-Temperature Applications

    Science.gov (United States)

    2008-01-01

    Composite materials with improved thermal conductivity and good mechanical strength properties should allow for the design and construction of more thermally efficient components (such as pipes and valves) for use in fluid-processing systems. These materials should have wide application in any number of systems, including ground support equipment (GSE), lunar systems, and flight hardware that need reduced heat transfer. Researchers from the Polymer Science and Technology Laboratory and the Cryogenics Laboratory at Kennedy Space Center were able to develop a new series of composite materials that can meet NASA's needs for lightweight materials/composites for use in fluid systems and also expand the plastic-additive markets. With respect to thermal conductivity and physical properties, these materials are excellent alternatives to prior composite materials and can be used in the aerospace, automotive, military, electronics, food-packaging, and textile markets. One specific application of the polymeric composition is for use in tanks, pipes, valves, structural supports, and components for hot or cold fluid-processing systems where heat flow through materials is a problem to be avoided. These materials can also substitute for metals in cryogenic and other low-temperature applications. These organic/inorganic polymeric composite materials were invented with significant reduction in heat transfer properties. Decreases of 20 to 50 percent in thermal conductivity versus that of the unmodified polymer matrix were measured. These novel composite materials also maintain mechanical properties of the unmodified polymer matrix. These composite materials consist of an inorganic additive combined with a thermoplastic polymer material. The intrinsic, low thermal conductivity of the additive is imparted into the thermoplastic, resulting in a significant reduction in heat transfer over that of the base polymer itself, yet maintaining most of the polymer's original properties. Normal

  16. Materials research at Stanford University. [composite materials, crystal structure, acoustics

    Science.gov (United States)

    1975-01-01

    Research activity related to the science of materials is described. The following areas are included: elastic and thermal properties of composite materials, acoustic waves and devices, amorphous materials, crystal structure, synthesis of metal-metal bonds, interactions of solids with solutions, electrochemistry, fatigue damage, superconductivity and molecular physics and phase transition kinetics.

  17. Influence of Nano-SiO2 on the Consistency, Setting Time, Early-Age Strength, and Shrinkage of Composite Cement Pastes

    Directory of Open Access Journals (Sweden)

    Yu Chen

    2016-01-01

    Full Text Available The study outlined the raw materials and mix proportions to prepare composite cement pastes with the addition of silica-based micro- and nanoparticles. The effects of amorphous nano-SiO2 on the early-age properties, including the consistency, setting time, early-age strength, and chemical and autogenous shrinkages, were investigated. Under the condition of the same dosage of superplasticizer used, the consistency of cement paste with nano-SiO2 is higher than that with silica fume. Significant reductions of the initial and final setting times are observed especially for nano-SiO2 addition groups, and the time difference between the initial and final setting times goes up with the increasing proportions of nano-SiO2. The addition of nano-SiO2 is more helpful to the improvement of early-age strengths of the paste with or without fly ash admixed than silica fume additive for the same mass proportion. Both the chemical and autogenous shrinkages of cement paste develop with the increasing amount of micro- or nanolevel silica particles; however, nano-SiO2 plays a more active role than silica fume in inspiring early-age shrinkage. The physical and chemical mechanisms of nano-SiO2 in cement paste are also discussed.

  18. Application of Al/B/Fe2O3 Nano Thermite in Composite Solid Propellant

    Directory of Open Access Journals (Sweden)

    Jingke Deng

    2016-03-01

    Full Text Available Hydroxyl-terminated polybutadiene (HTPB propellant were prepared with different content of Al/B/Fe2O3 nano thermite, and the mechanical, thermal and energetic performances were studied. Al/B/Fe2O3 nano thermite exhibited good compatibility with HTPB and dioctyl sebacate (DOS through differential scanning calorimetry (DSC tests. Mechanical experiments show that the mechanical properties of HTPB propellant could be improved by the addition of a small quantity of Al/B/Fe2O3 nano thermite, compared with the absence of Al/B/Fe2O3 nano thermite. For example, with the addition of 3% Al/B/Fe2O3 nano thermite, the tensile strength and elongation of propellant had the increase of 15.3% and 32.1%, respectively. Thermal analysis indicated that the decomposition of ammonium perchlorate (AP in HTPB propellant could be catalyzed by Al/B/Fe2O3 nano thermite, the high-temperature exothermic peak of AP was shifted to lower temperature by 70.8 °C when the content of Al/B/Fe2O3 nano thermite was 5%, and the heat released was enhanced by 70%. At the same time, the heat of explosion of HTPB propellant could also be enhanced by the addition of Al/B/Fe2O3 nano thermite. Copyright © 2016 BCREC GROUP. All rights reserved  Received: 5th November 2015; Revised: 4th December 2015; Accepted: 30th December 2015 How to Cite: Deng, J., Li, G., Shen, L., Luo, Y. (2016. Application of Al/B/Fe2O3 Nano Thermite in Composite Solid Propellant. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (1: 109-114. (doi:10.9767/bcrec.11.1.432.109-114 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.11.1.432.109-114

  19. Natural Composite Systems for Bioinspired Materials.

    Science.gov (United States)

    Frezzo, Joseph A; Montclare, Jin Kim

    From a relatively limited selection of base materials, nature has steered the development of truly remarkable materials. The simplest and often overlooked organisms have demonstrated the ability to manufacture multi-faceted, molecular-level hierarchical structures that combine mechanical properties rarely seen in synthetic materials. Indeed, these natural composite systems, composed of an array of intricately arranged and functionally relevant organic and inorganic substances serve as inspiration for materials design. A better understanding of these composite systems, specifically at the interface of the hetero-assemblies, would encourage faster development of environmentally friendly "green" materials with molecular level specificities.

  20. Synthesis and Characterization of Nano Boron Nitride Reinforced Magnesium Composites Produced by the Microwave Sintering Method

    Directory of Open Access Journals (Sweden)

    Manoj Gupta

    2013-05-01

    Full Text Available In this study, magnesium composites with nano-size boron nitride (BN particulates of varying contents were synthesized using the powder metallurgy (PM technique incorporating microwave-assisted two-directional sintering followed by hot extrusion. The effect of nano-BN addition on the microstructural and the mechanical behavior of the developed Mg/BN composites were studied in comparison with pure Mg using the structure-property correlation. Microstructural characterization revealed uniform distribution of nano-BN particulates and marginal grain refinement. The coefficient of thermal expansion (CTE value of the magnesium matrix was improved with the addition of nano-sized BN particulates. The results of XRD studies indicate basal texture weakening with an increase in nano-BN addition. The composites showed improved mechanical properties measured under micro-indentation, tension and compression loading. While the tensile yield strength improvement was marginal, a significant increase in compressive yield strength was observed. This resulted in the reduction of tension-compression yield asymmetry and can be attributed to the weakening of the strong basal texture.

  1. Nano

    DEFF Research Database (Denmark)

    Nørgaard, Bent; Engel, Lars Romann

    2007-01-01

    Gennem de sidste par år har et lille ord med et meget stort potentiale gentagende trængt sig på i den offentlige bevidsthed, det er ordet "nano". Nanovidenskab og nanoteknologi er lige nu to af de "hotteste" forskningsområder og betragtes af mange som porten til en helt ny verden af muligheder....... Muligheder, vi endnu ikke kender konsekvenserne af. Center for Kunst og Videnskabs forestilling NANO giver dig chancen for at blive bekendt med verdens mindste byggesten og idégrundlaget for nanoforskningen. Vi har skabt et rum, som på mange måder minder om et laboratorium. Rummet er forsynet med storskærme......, kolber, væsker og nanopartikler. Her vil du f.eks. opleve, hvordan forskere tilfører guld helt nye egenskaber. Forestillingen veksler mellem kemiske arbejdsdemonstrationer, stemningsskabende musik og livlig debat på storskærme mellem eksperter. NANO opfordrer publikum til at tage stilling til forskningen...

  2. Effect of high energy electron beam (10MeV) on specific heat capacity of low-density polyethylene/hydroxyapatite nano-composite.

    Science.gov (United States)

    Soltani, Z; Ziaie, F; Ghaffari, M; Beigzadeh, A M

    2017-02-01

    In the present work, thermal properties of low density polyethylene (LDPE) and its nano composites are investigated. For this purpose LDPE reinforced with different weight percents of hydroxyapatite (HAP) powder which was synthesized via hydrolysis method are produced. The samples were irradiated with 10MeV electron beam at doses of 75 to 250kGy. Specific heat capacity measurement have been carried out at different temperatures, i.e. 25, 50, 75 and 100°C using modulated temperature differential scanning calorimetry (MTDSC) apparatus and the effect of three parameters include of temperature, irradiation dose and the amount of HAP nano particles as additives on the specific heat capacity of PE/HAP have been investigated precisely. The MTDSC results indicate that the specific heat capacity have decreased by addition of nano sized HAP as reinforcement for LDPE. On the other hand, the effect of radiation dose is reduction in the specific heat capacity in all materials including LDPE and its nano composites. The HAP nano particles along with cross-link junctions due to radiation restrain the movement of the polymer chains in the vicinity of each particle and improve the immobility of polymer chains and consequently lead to reduction in specific heat capacity. Also, the obtained results confirm that the radiation effect on the specific heat capacity is more efficient than the reinforcing effect of nano-sized hydroxyapatite.

  3. Processing and properties of Cu based micro- and nano-composites

    Indian Academy of Sciences (India)

    S Panda; K Dash; B C Ray

    2014-04-01

    Nano-composites of 1, 3, 5 and 7 vol% Al2O3 (average size < 50 nm) and microcomposites having compositions 5, 10, 15, 20 vol% of Al2O3 (average size ∼ 10 m) reinforced in copper matrix were fabricated by powder metallurgy route. All the specimens were sintered at different sintering temperatures (850, 900 and 1000°C) to study the effect of temperature on the process and progress of sinterability of the reinforced micro- and nanoparticles in the matrix. These micro- and nano-composites were characterized using X-ray diffraction and scanning electron microscopy followed by density, microhardness and wear measurements. The compression and flexural tests were also carried out in order to investigate the mechanical behaviour of the micro- and nano-composites for a fixed optimum sintering temperature. Fractography of the 3-point bend specimens was performed to investigate the fracture behaviour of the micro- and nano-composites. The flexural test results showed that the ultimate flexural strength decreases and flexural modulus increases with the increase in reinforcement content.

  4. Wear and mechanical properties of nano-silica-fused whisker composites.

    Science.gov (United States)

    Xu, H H K; Quinn, J B; Giuseppetti, A A

    2004-12-01

    Resin composites must be improved if they are to overcome the high failure rates in large stress-bearing posterior restorations. This study aimed to improve wear resistance via nano-silica-fused whiskers. It was hypothesized that nano-silica-fused whiskers would significantly improve composite mechanical properties and wear resistance. Nano-silicas were fused onto whiskers and incorporated into a resin at mass fractions of 0%-74%. Fracture toughness (mean +/- SD; n = 6) was 2.92 +/- 0.14 MPa.m(1/2) for whisker composite with 74% fillers, higher than 1.13 +/- 0.19 MPa.m(1/2) for a prosthetic control, and 0.95 +/- 0.11 MPa.m(1/2) for an inlay/onlay control (Tukey's at 0.95). A whisker composite with 74% fillers had a wear depth of 77.7 +/- 6.9 mum, less than 118.0 +/- 23.8 microm of an inlay/onlay control, and 172.5 +/- 15.4 microm of a prosthetic control (p hardness, modulus, strength, and toughness, with R = 0.95-0.97. Novel nano-silica-fused whisker composites possessed high toughness and wear resistance with smooth worn surfaces, and may be useful in large stress-bearing restorations.

  5. Biomedical composites materials, manufacturing and engineering

    CERN Document Server

    Davim, J Paulo

    2013-01-01

    Composite materials are engineered materials, made from two or more constituents with significantly different physical or chemical properties which remain separate on a macroscopic level within the finished structure. Due to their special mechanical and physical properties they have the potential to replace conventional materials in various fields such as the biomedical industry.

  6. Fabrication of nano structural biphasic materials from phosphogypsum waste and their in vitro applications

    Energy Technology Data Exchange (ETDEWEB)

    Mohamed, Khaled R., E-mail: Kh_rezk966@yahoo.com [Biomaterials Department, National Research Centre, Dokki, Cairo (Egypt); Mousa, Sahar M. [Chemistry Department, Science and Art College, King Abdulaziz University, Rabigh Campus, P.O. Box 344, 21911 Rabigh (Saudi Arabia); Inorganic Chemistry Department, National Research Centre, Dokki, P.O. Box 12622, 11787 Cairo (Egypt); El Bassyouni, Gehan T. [Biomaterials Department, National Research Centre, Dokki, Cairo (Egypt); Medical Physics Department, College of Medicine, Taif University (Saudi Arabia)

    2014-02-01

    Graphical abstract: (a) Schema of the process, (b) TEM of nano particles of biphasic materials and (c) SEM of post-immersion. - Highlights: • Ratio of HA and β-TCP phases were controlled by thermal treatment. • HA partially decomposed into β-TCP with other bioactive phases. • Calcined HA at 900 °C is the best for the bioactivity behavior. - Abstract: In this study, a novel process of preparing biphasic calcium phosphate (BCP) is proposed. Also its bioactivity for the utilization of the prepared BCP as a biomaterial is studied. A mixture of calcium hydroxyapatite (HAP) and tricalcium phosphate (β-TCP) could be obtained by thermal treatment of HAP which was previously prepared from phosphogypsum (PG) waste. The chemical and phase composition, morphology and particle size of prepared samples was characterized by X-ray diffraction (XRD), Infrared spectroscopy (IR), Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM). The bioactivity was investigated by soaking of the calcined samples in simulated body fluid (SBF). Results confirmed that the calcination temperatures played an important role in the formation of calcium phosphate (CP) materials. XRD results indicated that HAP was partially decomposed into β-TCP. The in vitro data confirmed that the calcined HAP forming BCP besides other phases such as pyrophosphate and silica are bioactive materials. Therefore, BCP will be used as good biomaterials for medical applications.

  7. Preparation and Photocatalytic Performance of TiO2/Graphene Nano-composite Material%TiO2/石墨烯纳米复合材料制备及其光催化性能研究

    Institute of Scientific and Technical Information of China (English)

    周建伟; 王储备; 禇亮亮; 张明瑛; 史磊

    2013-01-01

    TiO2/graphene composite photocatalyst has been prepared by a facile liquid phase deposition method using titanium trifluoride and graphene oxide as the raw materials.The products were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Visible analysis.It was found that the reduction graphene was covered with petal-like anatase TiO2 nanoparticles, which were more uniform and smaller in size.The photocatalytic activities were evaluated using the photocatalytic reduction of CO2.Photocatalytic reduction of CO2 with H2O in the aqueous phase is studied by using TiO2/graphene catalyst under UV irradiation.The results showed that the compostie exhibited significantly photocatalytic reduction activities and reaction products high selectivity, reaction 6 h methanol accumulated production for 3.43 mmol/L.Graphene effectively improved the photocatalytic activity and reaction efficiency of the semiconductor, and synergistic effect was obvious.%以TiCl3和氧化石墨(GO)为原料,采用简便的原位液相法制备了TiO2/石墨烯(RGO)纳米复合材料.利用XRD、SEM、XPS和UV-Vis光谱表征了其微观结构及性能,实验考察了复合材料光催化还原CO2性能,探究了其光催化反应机理.研究表明,TiO2/石墨烯纳米复合材料具有显著的光催化还原活性,光催化反应产物选择性高,反应6.0h甲醇的累积产量为3.43 mmol/L,石墨烯的协同效应提高了TiO2半导体的光催化活性和反应效率.

  8. Strongly coupled inorganic-nano-carbon hybrid materials for energy storage.

    Science.gov (United States)

    Wang, Hailiang; Dai, Hongjie

    2013-04-07

    The global shift of energy production from fossil fuels to renewable energy sources requires more efficient and reliable electrochemical energy storage devices. In particular, the development of electric or hydrogen powered vehicles calls for much-higher-performance batteries, supercapacitors and fuel cells than are currently available. In this review, we present an approach to synthesize electrochemical energy storage materials to form strongly coupled hybrids (SC-hybrids) of inorganic nanomaterials and novel graphitic nano-carbon materials such as carbon nanotubes and graphene, through nucleation and growth of nanoparticles at the functional groups of oxidized graphitic nano-carbon. We show that the inorganic-nano-carbon hybrid materials represent a new approach to synthesize electrode materials with higher electrochemical performance than traditional counterparts made by simple physical mixtures of electrochemically active inorganic particles and conducting carbon materials. The inorganic-nano-carbon hybrid materials are novel due to possible chemical bonding between inorganic nanoparticles and oxidized carbon, affording enhanced charge transport and increased rate capability of electrochemical materials without sacrificing specific capacity. Nano-carbon with various degrees of oxidation provides a novel substrate for nanoparticle nucleation and growth. The interactions between inorganic precursors and oxidized-carbon substrates provide a degree of control over the morphology, size and structure of the resulting inorganic nanoparticles. This paper reviews the recent development of inorganic-nano-carbon hybrid materials for electrochemical energy storage and conversion, including the preparation and functionalization of graphene sheets and carbon nanotubes to impart oxygen containing groups and defects, and methods of synthesis of nanoparticles of various morphologies on oxidized graphene and carbon nanotubes. We then review the applications of the SC

  9. Synthesis, characterization, and CO2 capture study of micro-nano carbonaceous composites.

    Science.gov (United States)

    Kong, Yuxia; Jin, Lei; Qiu, Jun

    2013-10-01

    The micro-nano carbonaceous composite activated carbon fiber/carbon nanotube (ACF/CNTs) was obtained by chemical vapor deposition technology with CNTs growth on the substrate ACF, and the composite was further modified by branched polyethyleneimine (PEI). The morphological features of the as-grown ACF/CNTs and PEI-modified samples were analyzed by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and thermal gravimetric analysis respectively. Physical properties of the samples were recorded by conducting N2 adsorption/desorption at 77K. CO2 capture tests indicated that both the presence of CNTs and PEI increased the CO2 adsorption capacity, due to the unique hollow tubular structure of CNTs and poly amino groups of PEI. The CO2 adsorption capacities of ACF/CNTs and ACF/CNTs-PEI were tested to be 66.2 mg/g and 98.8 mg/g, respectively at 30°C, which were much higher than that of unmodified ACF (42.4 mg/g). Increasing adsorption temperature up to 60°C further promoted the CO2 adsorption capacity of ACF/CNTs-PEI (121.2 mg/g) due to the maximum equilibrium adsorption between the chemical and physical adsorption at this temperature. Cyclic CO2 adsorption tests via thermal desorption proved that ACF/CNTs-PEI had a good regenerability of 96.2%, suggesting this material is a promising CO2 adsorbent for practical applications.

  10. Gamma radiation effects on nano composites of Ag nanoparticles in Zn O matrices; Efectos de la radiacion gamma en nanocompositos de nanoparticulas de Ag en matrices de ZnO

    Energy Technology Data Exchange (ETDEWEB)

    Villasenor C, L. S.

    2015-07-01

    The study of gamma radiation effects in nano composites of silver nanoparticles in a Zn O matrix has been performed in this work. First, silver nanoparticles (AgNPs) were synthesized by colloidal methods, with two different mean average sizes, 48 nm and 24 nm respectively. These nanoparticles were characterized by transmission electron microscopy (Tem) and UV-Vis spectroscopy (UV-Vis). Then, with the synthesized AgNPs, nano composites in a matrix of Zn O were prepared. The first nano composite was prepared with the 48 nm AgNPs at 9.5 weight % of silver (Ag) and the second nano composite with the 24 nm nanoparticles at 1.0 weight % of Ag. Both nano composites were analyzed by scanning electron microscopy (Sem). The formation of the Zn O phase in the nano composite was corroborated through X-ray diffraction analysis. It was observed that the presence of AgNPs during the formation of the AgNPs/Zn O nano composite modified the size and morphology of the structures obtained compared to those of the pure Zn O without nanoparticles, however both exhibit a radial structure. Then, the nano composite at 9.5 weight % of Ag was irradiated with gamma rays at doses of 1, 20 and 50 kGy. Samples were analyzed by Sem and the Bet technique, before and after being irradiated, in order to determine the effect of gamma radiation in the morphology, porosity and surface area of the studied material. Even when there are changes in porosity and Surface area, this difference is not very significant for some applications, however it will have to be considered during the design of a specific application of the nano composites. On the other hand, no morphology modifications were identified on the samples irradiated at the studied doses, with the electron microscopy techniques used. (Author)

  11. Ceramic composites: Enabling aerospace materials

    Science.gov (United States)

    Levine, S. R.

    1992-01-01

    Ceramics and ceramic matrix composites (CMC) have the potential for significant impact on the performance of aerospace propulsion and power systems. In this paper, the potential benefits are discussed in broad qualitative terms and are illustrated by some specific application case studies. The key issues in need of resolution for the potential of ceramics to be realized are discussed.

  12. Effect of interface structure on mechanical properties of advanced composite materials.

    Science.gov (United States)

    Gan, Yong X

    2009-11-25

    This paper deals with the effect of interface structures on the mechanical properties of fiber reinforced composite materials. First, the background of research, development and applications on hybrid composite materials is introduced. Second, metal/polymer composite bonded structures are discussed. Then, the rationale is given for nanostructuring the interface in composite materials and structures by introducing nanoscale features such as nanopores and nanofibers. The effects of modifying matrices and nano-architecturing interfaces on the mechanical properties of nanocomposite materials are examined. A nonlinear damage model for characterizing the deformation behavior of polymeric nanocomposites is presented and the application of this model to carbon nanotube-reinforced and reactive graphite nanotube-reinforced epoxy composite materials is shown.

  13. Novel quaternized poly(arylene ether sulfone)/Nano-ZrO₂ composite anion exchange membranes for alkaline fuel cells.

    Science.gov (United States)

    Li, Xiuhua; Yu, Yingfeng; Meng, Yuezhong

    2013-02-01

    A series of composite anion exchange membranes based on novel quaternized poly(arylene ether sulfone)/nanozirconia (QPAES/nano-ZrO₂) composites are prepared using a solution casting method. The QPAES/nano-ZrO₂ composite membranes are characterized by FTIR, X-ray diffraction (XRD), and scanning electron microscopy/energy-dispersive X-ray analysis (SEM/EDX). The ion exchange capacity (IEC), water uptake, swelling ratio, hydroxide ion conductivity, mechanical properties, thermal stability, and chemical stability of the composite membranes are measured to evaluate their applicability in fuel cells. The introduction of nano-ZrO₂ induces the crystallization of the matrix and enhances the IEC of the composite membranes. The modification with nano-ZrO₂ improves water uptake, dimension stability, hydroxide ion conductivity, mechanical properties, and thermal and chemical stabilities of the composite membranes. The QPAES/nano-ZrO₂ composite membranes show hydroxide ion conductivities over 25.7 mS cm⁻¹ at a temperature above 60 °C. Especially, the QPAES/nano-ZrO₂ composite membranes with the nano-ZrO₂ content above 7.5% display hydroxide ion conductivities over 41.4 mS cm⁻¹ at 80 °C. The E(a) values of the QPAES/nano-ZrO₂ composite membranes with the nano-ZrO₂ content above 5% are lower than 11.05 kJ mol⁻¹. The QPAES/7.5% nano-ZrO₂ composite membrane displays the lowest E(a) value and the best comprehensive properties and constitutes a good potential candidate for alkaline fuel cells.

  14. In vitro investigation of coupling-agent-free dental restorative composite based on nano-porous alumina fillers.

    Science.gov (United States)

    Thorat, Sanjay B; Diaspro, Alberto; Salerno, Marco

    2014-03-01

    The study aims at demonstrating the feasibility of a novel type of coupling-agent-free resin composite based on nano-porous fillers. The fillers were obtained by ball-milling anodic alumina membranes. Composites were prepared with standard resin at maximum loading of 50% by weight. The resin matrix penetration into the pores was verified visually by scanning electron microscopy and mechanically by atomic force microscopy in force modulation mode. The dynamic flexural modulus at 1Hz was measured by dynamic mechanical analysis. Silver nanoparticles were also synthesized in the pores and their release was investigated with inductive coupled plasma optical emission spectrometry. A storage modulus of 5GPa was measured, similar to the ∼6GPa ones of two coupling-agent-based dental restorative composites used for comparison, which is a promising starting point, additionally showing better one-year equivalent ageing as compared to both commercial materials. Loading the pores with silver nanoparticles was demonstrated as well as their subsequent release in a model system. The alumina micro-particles with interconnected nano-pores allow mechanical interlocking between fillers and matrix without the need for chemical bonding. This material is also promising for being made bio-active, after pore filling with different agents. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Environmental silicate nano-biocomposites

    CERN Document Server

    Pollet, Eric

    2012-01-01

    Environmental Silicate Nano-Biocomposites focuses on nano-biocomposites, which are obtained by the association of silicates such as bioclays with biopolymers. By highlighting recent developments and findings, green and biodegradable nano-composites from both renewable and biodegradable polymers are explored. This includes coverage of potential markets such as packaging, agricultures, leisure and the fast food industry. The knowledge and experience of more than twenty international experts in diverse fields, from chemical and biochemical engineering to applications, is brought together in four different sections covering: Biodegradable polymers and Silicates, Clay/Polyesters Nano-biocomposites, Clay/Agropolymers Nano-biocomposites, and Applications and biodegradation of Nano-biocomposites. By exploring the relationships between the biopolymer structures, the processes, and the final properties Environmental Silicate Nano-Biocomposites explains how to design nano-materials to develop new, valuable, environmenta...

  16. Rational molecular dynamics scheme for predicting optimum concentration loading of nano-additive in phase change materials

    Directory of Open Access Journals (Sweden)

    Monisha Rastogi

    2015-10-01

    Full Text Available The present study deals with the diffusion and phase transition behaviour of paraffin reinforced with carbon nano-additives namely graphene oxide (GO and surface functionalized single walled carbon nanotubes (SWCNT. Bulk disordered systems of paraffin hydrocarbons impregnated with carbon nano-additives have been generated in realistic equilibrium conformations for potential application as latent heat storage systems. Ab initio molecular dynamics(MD in conjugation with COMPASS forcefield has been implemented using periodic boundary conditions. The proposed scheme allows determination of optimum nano-additive loading for improving thermo-physical properties through analysis of mass, thermal and transport properties; and assists in determination of composite behaviour and related performance from microscopic point of view. It was observed that nanocomposites containing 7.8 % surface functionalised SWCNT and 55% GO loading corresponds to best latent heat storage system. The propounded methodology could serve as a by-pass route for economically taxing and iterative experimental procedures required to attain the optimum composition for best performance. The results also hint at the large unexplored potential of ab-initio classical MD techniques for predicting performance of new nanocomposites for potential phase change material applications.

  17. Rational molecular dynamics scheme for predicting optimum concentration loading of nano-additive in phase change materials

    Science.gov (United States)

    Rastogi, Monisha; Vaish, Rahul; Madhar, Niyaz Ahamad; Shaikh, Hamid; Al-Zahrani, S. M.

    2015-10-01

    The present study deals with the diffusion and phase transition behaviour of paraffin reinforced with carbon nano-additives namely graphene oxide (GO) and surface functionalized single walled carbon nanotubes (SWCNT). Bulk disordered systems of paraffin hydrocarbons impregnated with carbon nano-additives have been generated in realistic equilibrium conformations for potential application as latent heat storage systems. Ab initio molecular dynamics(MD) in conjugation with COMPASS forcefield has been implemented using periodic boundary conditions. The proposed scheme allows determination of optimum nano-additive loading for improving thermo-physical properties through analysis of mass, thermal and transport properties; and assists in determination of composite behaviour and related performance from microscopic point of view. It was observed that nanocomposites containing 7.8 % surface functionalised SWCNT and 55% GO loading corresponds to best latent heat storage system. The propounded methodology could serve as a by-pass route for economically taxing and iterative experimental procedures required to attain the optimum composition for best performance. The results also hint at the large unexplored potential of ab-initio classical MD techniques for predicting performance of new nanocomposites for potential phase change material applications.

  18. Surface modifications and Nano-composite coatings to improve the bonding strength of titanium-porcelain

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Litong, E-mail: guolitong810104@163.com [China University of Mining and Technology, Xuzhou 221116 (China); ustralian Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, QLD 4072 (Australia); Chen, Xiaoyuan; Liu, Xuemei; Feng, Wei [China University of Mining and Technology, Xuzhou 221116 (China); Li, Baoe [School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130 (China); Lin, Cheng; Tao, Xueyu; Qiang, Yinghuai [China University of Mining and Technology, Xuzhou 221116 (China)

    2016-04-01

    Surface modifications of Ti and nano-composite coatings were employed to simultaneously improve the surface roughness, corrosion resistance and chemical bonding between porclain-Ti. The specimens were studied by field-emission scanning electron microscopy, surface roughness, differential scanning calorimetry, Fourier transform infrared spectroscopy, corrosion resistance and bonding strength tests. The SEM results showed that hybrid structures with micro-stripes, nano-pores and nano-protuberances were prepared by surface modification of Ti, which significantly enhanced the surface roughness and corrosion resistance of Ti. Porous nano-composite coatings were synthesized on Ti anodized with pre-treatment in 40% HF acid. TiO{sub 2} nanoparticles were added into the hybrid coating to increase the solid phase content of the sols and avoid the formation of microcracks. With the TiO{sub 2} content increasing from 45 wt% to 60 wt%, the quantities of the microcracks on the coating surface gradually decreased. The optimal TiO{sub 2} content for the nanocomposite coatings is 60 wt% in this research. Compared to the uncoated group, the bonding strength of the coated groups showed a bonding strength improvement of 23.96%. The cytotoxicity of the 4# coating group was ranked as zero, which corresponds to non-cytotoxicity. - Highlights: • Surface roughness of Ti was increased by surface modification of Ti. • Corrosion resistance was enhanced by surface modification of Ti. • Porous nano-composite coatings were synthesized on Ti by sol–gel process. • TiO{sub 2} nanoparticles were added into the coating to avoid formation of cracks. • The nano-composite coatings increased the bonding strength of about 24%.

  19. Removal of light petroleum hydrocarbons from water sources using polypropylene and titanium dioxide nano-composite

    Directory of Open Access Journals (Sweden)

    H. Karyab

    2016-08-01

    Full Text Available Background: Petroleum hydrocarbons are the most important pollutants which threat human health and aquatics. Adsorbents are one of the common equipment in water pollution management; however, their applications have been associated with limitations. Objective: To evaluate the potential of polypropylene/titanium dioxide Nano-composite in adsorption of light petroleum hydrocarbons from water sources. Methods: This experimental study was conducted at school of health, Qazvin University of Medical Sciences in 2014-15. Activation of polypropylene fibers, with 1 cm length and 300 microns diameters, was achieved with wet heating. To synthesize of nano-composite the fibers were coated with nano-titanium dioxide with 20 nm diameter. The sonication was performed at 26 kHz and 100 W of power in 40ºc. The morphology of the fractured surfaces of impact specimens was examined by FESEM. The adsorption rate of petrol and gasoline, as surrogate of TPH, was evaluated in different retention time within polyamide mesh aperture diameter of 250 nm. Average of TPH adsorbing, per unit weight of adsorbent, were analyzed with analysis of variance and Scheffe post hoc tests. Findings: The FESEM micrographs showed that the dispersion of the nano-Tio2 particles was relatively good and only few aggregations exist. The maximum adsorption capacity of petrol and gasoline was obtained in 30 minute. The adsorption rate of gasoline was 6.49±0.10 g/g and oil was 7.01±0.13 g/g. Conclusion: According to the results and in comparison with commercial imported adsorbents, the synthesized Nano-composite had favorable performance. The results show that the polypropylene/Tio2 Nano-composite can be used effectively in light petroleum hydrocarbons removal from polluted water sources.

  20. Fibrous and textile materials for composite applications

    CERN Document Server

    Fangueiro, Raul

    2016-01-01

    This book focuses on the fibers and textiles used in composite materials. It presents both existing technologies currently used in commercial applications and the latest advanced research and developments. It also discusses the different fiber forms and architectures, such as short fibers, unidirectional tows, directionally oriented structures or advanced 2D- and 3D-textile structures that are used in composite materials. In addition, it examines various synthetic, natural and metallic fibers that are used to reinforce polymeric, cementitious and metallic matrices, as well as fiber properties, special functionalities, manufacturing processes, and composite processing and properties. Two entire chapters are dedicated to advanced nanofiber and nanotube reinforced composite materials. The book goes on to highlight different surface treatments and finishes that are applied to improve fiber/matrix interfaces and other essential composite properties. Although a great deal of information about fibers and textile str...

  1. Spectrophotometric Evaluation of Colour Stability of Nano Hybrid Composite Resin in Commonly Used Food Colourants in Asian Countries

    Science.gov (United States)

    Sajjan, Girija S; Varma Kanumuri, Madhu

    2017-01-01

    Introduction There is growing interest in colour stability of aesthetic restorations. So far few studies have been reported. Aim This study was designed to investigate the effects of different common food colourants i.e., Turmeric and Carmoisine (orange red dye) consumed by patients in Asian countries on a recent nano hybrid composite resin. Materials and Methods A total of sixty disk shaped specimens measuring 10 mm in diameter and 2 mm in thickness were prepared. The samples were divided into two groups {Z 100 (Dental restorative composite) Filtek Z 250 XT (Nano hybrid universal restorative)}. Baseline colour measurement of all specimens were made using reflectance spectrophotometer with CIE L*a*b* system. Specimens were immersed in artificial saliva and different experimental solutions containing food colourants (carmoisine solution and turmeric solution) for three hours per day at 37°C. Colour measurements were made after 15 days. Colour difference (ΔE*) was calculated. Mean values were compared by one-way analysis of variance (ANOVA). Multiple range test by Tukey Post-hoc test procedure was employed to identify the significant groups at 5% level. Results Z 100 showed minimum staining capacity when compared to Z 250 XT in both the colourant solutions. Conclusion The nanohybrid composite resin containing TEGDMA showed significant colour change when compared to that of microhybrid composite resin as a result of staining in turmeric and carmoisine solution. PMID:28274047

  2. Preparation and characterization of nano-hydroxyapatite/chitosan/konjac glucomannan composite

    NARCIS (Netherlands)

    Zhou, G.; Li, Yubao; Zhang, L.; Zuo, Y.; Jansen, J.A.

    2007-01-01

    Nano-hydroxyapatite (n-HA)/chitosan (CS)/konjac glucomannan (KGM) composite was prepared by coprecipitation method and investigated by thermal gravitivity/differentiate thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction, inductively coupled plasma emission spectroscopy, sca

  3. Some studies on ceria–zirconia reinforced solvothermally synthesized cordierite nano-composites

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, Abhinav, E-mail: srivasabhinav@gmail.com; Singh, Vinay Kumar; Kumar, Vijay; Hemanth Kumar, P.; Tripathi, Himanshu; Chaudhary, Ashish; Asiwal, Krit; Pandey, Rahul; Suman, Shyam Kumar

    2014-02-15

    Graphical abstract: -- Highlights: • Nanocordierite synthesized through solvo-thermal process. • [CeO{sub 2(0.12)}]⋅[ZrO{sub 2(0.88)}] processed by gelation and co-precipitation method. • The effect of mineralizer addition on cordierite formation was studied. • Investigation of thermo-mechanical properties of prepared nano-composites. -- Abstract: Nanostructured cordierite and 12 mol% ceria stabilized zirconia were chemically prepared separately. Pure cordierite was synthesized solvothermally, whereas [(Zr){sub 0.88}(Ce){sub 0.12}O{sub 2}] termed as CeSZ was processed with gelation and co-precipitation method. The evolution of crystalline phases and the microstructures have been studied using X-ray diffractometer, and FE-SEM with EDX. Varying contents (0–20 weight%) of CeSZ were then mixed with cordierite to form sample blocks of desired shapes. These nano-composite blocks were fired at 1100–1400 °C for a soaking time of 3 h to observe their thermo-mechanical, micro-structural and physical properties. Results indicate that ceria not only acts as a stabilizer in zirconia ceramics but it also acts as a sintering aid in cordierite formation. CeO{sub 2} also improves compressibility and structural properties of nano-composites. Sintering temperature also plays an important role in the behavior of nano-composite blocks. All properties show a major improvement than previous reported data’s.

  4. Ordered mesoporous carbon/graphene nano-sheets composites as counter electrodes in dye-sensitized solar cells

    Science.gov (United States)

    Shao, Leng-Leng; Chen, Ming; Ren, Tie-Zhen; Yuan, Zhong-Yong

    2015-01-01

    The composites of ordered mesoporous carbon (OMC) and graphene nano-sheets (GNS) are prepared by mixing OMC with different weight ratios of GNS, and utilized as counter electrode (CE) materials for dye-sensitized solar cells (DSSCs). Electrochemical impedance spectroscopy, Tafel polarization, and cyclic voltammetry measurements demonstrate that the OMC/GNS CEs display the enhanced electron transport property and fast reduction rate of I3- in comparison with those of the individual OMC and GNS CEs, due to the combination of superior electrical conductivity of GNS and good catalytic activity of OMC. Under AM 1.5 irradiation (100 mW cm-2), the DSSCs based on the OMC/GNS CEs show a maximum power conversion efficiency of 6.82%, which is comparable to 7.08% of the cell with the conventional Pt CE at the same experimental conditions, suggesting that the OMC/GNS composites are one of advanced CE materials for low-cost DSSCs.

  5. Molecular dynamics study on core-shell structure stability of aluminum encapsulated by nano-carbon materials

    Science.gov (United States)

    Yi, Qingwen; Xu, Jingcheng; Liu, Yi; Zhai, Dong; Zhou, Kai; Pan, Deng

    2017-02-01

    A ReaxFF reactive forcefield for aluminum-carbon composite system has been developed to investigate structural stability and thermal decomposition mechanism of nano-carbon materials coating aluminum particles. Research results indicated the Al@C particles were structurally stable in a broad temperature range from room temperature up to 2735 K. In particular, the broken carbon cage self-healed to reconstruct a more stable Al@C core-shell structure after Al atoms sequentially departing from carbon cage during thermal decomposition, proffering an effective protection for aluminum surface-activeness.

  6. Multiscale modeling of microscale fiber reinforced composites with nano-engineered interphases

    CERN Document Server

    Kundalwalal, S I; Wardle, B L

    2015-01-01

    This study is focused on the mechanical properties and stress transfer behavior of multiscale composite containing nano- and micro-scale fillers. A novel concept has been proposed to exploit the remarkable mechanical properties of carbon nanotubes (CNTs) to improve the stress transfer through the interphases, enabling their additional functionalities not available otherwise at the microscale. The distinctive feature of construction of this composite is such that CNTs are dispersed around the microscale fiber to modify fiber-matrix interfacial adhesion. Accordingly, models are developed for hybrid composites. First, molecular dynamics simulations in conjunction with the Mori-Tanaka method are used to determine the effective elastic properties of nano-engineered interphase layer comprised of CNT bundles and epoxy. Subsequently, a micromechanical pull-out model is developed for the resulting multiscale composite and its stress transfer behavior is studied for different orientations of CNT bundles. The current pu...

  7. Preliminary biocompatible evaluation of nano-hydroxyapatite/polyamide 66 composite porous membrane

    Directory of Open Access Journals (Sweden)

    Yili Qu

    2010-06-01

    Full Text Available Yili Qu1,3, Ping Wang1,3, Yi Man1, Yubao Li2, Yi Zuo2, Jidong Li21State Key Laboratory of Oral Diseases, Sichuan University, Chengdu 610064, China; 2Research Center for Nano-Biomaterials, Analytical and Testing Center, Sichuan University, Chengdu 610064, China; 3These authors contributed equally to this workAbstract: Nano-hydroxyapatite/polyamide 66 (nHA/PA66 composite with good bioactivity and osteoconductivity was employed to develop a novel porous membrane with asymmetric structure for guided bone regeneration (GBR. In order to test material cytotoxicity and to investigate surface-dependent responses of bone-forming cells, the morphology, proliferation, and cell cycle of bone marrow stromal cells (BMSCs of rats cultured on the prepared membrane were determined. The polygonal and fusiform shape of BMSCs was observed by scanning electronic microscopy (SEM. The proliferation of BMSCs cultured on nHA/PA66 membrane tested by the MTT method (MTT: [3-{4,5-dimethylthiazol-2yl}-2,5-diphenyl-2H-tetrazoliumbromide] was higher than that of negative control groups for 1 and 4 days’ incubation and had no significant difference for 7 and 11 days’ culture. The results of cell cycle also suggested that the membrane has no negative influence on cell division. The nHA/PA66 membranes were then implanted into subcutaneous sites of nine Sprague Dawley rats. The wounds and implant sites were free from suppuration and necrosis in all periods. All nHA/PA66 membranes were surrounded by a fibrous capsule with decreasing thickness 1 to 8 weeks postoperatively. In conclusion, the results of the in vitro and in vivo studies reveal that nHA/PA66 membrane has excellent biocompatibility and indicate its use in guided tissue regeneration (GTR or GBR.Keywords: hydroxyapatite/polyamide, barrier membrane, biocompatibility, guided bone regeneration

  8. Multiphysicsbased Condition Monitoring of Composite Materials

    OpenAIRE

    Xue, Hui; Sharma, Puneet; Khawaja, Hassan Abbas

    2015-01-01

    Composites are increasingly being used in products such as: automobiles, bridges, boats, drillships, offshore platforms, aircrafts and satellites. The increased usage of these composite materials and the fact that the conditions pertaining to their failure are not fully understood makes it imperative to develop condition monitoring systems for composite structures. In this work, we present a theoretical framework for the development of a condition monitoring system. For this, we plan...

  9. Cumulative Damage Model for Advanced Composite Materials.

    Science.gov (United States)

    1982-07-01

    ultimately used an exponential in the present example for added simplicity) and we norma - lize the function so that it becomes the modifier that determines...Testing and Design (Second Conference), ASTM STP 497, ASTM (1972) pp. 170-188. 5. Halpin, J. C., et al., "Characterization of Composites for the...Graphite Epoxy Composites," Proc. Symposium on Composite Materials: Testing and Design, ASTM , (Ma’rch 20, 1978) New Orleans, LA. 18. Hashin, Z. and Rotem

  10. Mechanical and Morphological Properties of Nano Filler Polyester Composites

    OpenAIRE

    Bonnia Noor Najmi; Redzuan Aein Afina; Shuhaimeen Nurul Shakirah

    2016-01-01

    This research is focusing on mechanical and morphological properties of unsaturated polyester (UP) reinforced with two different types of filler which is nano size clay Cloisite 30B (C30B) and Carbon Black (CB). Samples were fabricated via hand lay-up and open molding technique. Percentages of Cloisite 30B & Carbon Black (CB) used vary from 0, 2, 4, 6, 8 and 10 wt%. The mechanical properties were evaluated by impact, flexural and hardness testing. Result shows that the mechanical strength of ...

  11. Method of making a composite refractory material

    Science.gov (United States)

    Morrow, Marvin S.; Holcombe, Cressie E.

    1995-01-01

    A composite refractory material is prepared by combining boron carbide with furan resin to form a mixture containing about 8 wt. % furan resin. The mixture is formed into a pellet which is placed into a grit pack comprising an oxide of an element such as yttrium to form a sinterable body. The sinterable body is sintered under vacuum with microwave energy at a temperature no greater than 2000.degree. C. to form a composite refractory material.

  12. Fissure sealant materials: Wear resistance of flowable composite resins.

    Science.gov (United States)

    Asefi, Sohrab; Eskandarion, Solmaz; Hamidiaval, Shadi

    2016-01-01

    Background. Wear resistance of pit and fissure sealant materials can influence their retention. Wear characteristics of sealant materials may determine scheduling of check-up visits. The aim of this study was to compare wear resistance of two flowable composite resins with that of posterior composite resin materials. Methods. Thirty-five disk-shaped specimens were prepared in 5 groups, including two flowable composite resins (Estelite Flow Quick and Estelite Flow Quick High Flow), Filtek P90 and Filtek P60 and Tetric N-Ceram. The disk-shaped samples were prepared in 25-mm diameter by packing them into a two-piece aluminum mold and then light-cured. All the specimens were polished for 1minute using 600-grit sand paper. The samples were stored in distilled water at room temperature for 1 week and then worn by two-body abrasion test using "pin-on-disk" method (with distilled water under a 15-Nload at 0.05 m/s, for a distance of 100 meter with Steatite ceramic balls antagonists). A Profilometer was used for evaluating the surface wear. Data were analyzed with the one-way ANOVA. Results. Estelite Flow Quick exhibited 2708.9 ± 578.1 μm(2) and Estelite Flow Quick High Flow exhibited 3206 ± 2445.1 μm(2)of wear but there were no significant differences between the groups. They demonstrated similar wear properties. Conclusion. Estelite flowable composite resins have wear resistance similar to nano- and micro-filled and micro-hybrid composite resins. Therefore, they can be recommended as pit and fissure sealant materials in the posterior region with appropriate mechanical characteristics.

  13. Fissure sealant materials: Wear resistance of flowable composite resins

    Directory of Open Access Journals (Sweden)

    Sohrab Asefi

    2016-08-01

    Full Text Available Background. Wear resistance of pit and fissure sealant materials can influence their retention. Wear characteristics of sealant materials may determine scheduling of check-up visits. The aim of this study was to compare wear resistance of two flowable composite resins with that of posterior composite resin materials. Methods. Thirty-five disk-shaped specimens were prepared in 5 groups, including two flowable composite resins (Estelite Flow Quick and Estelite Flow Quick High Flow, Filtek P90 and Filtek P60 and Tetric N-Ceram. The disk-shaped samples were prepared in 25-mm diameter by packing them into a two-piece aluminum mold and then light-cured. All the specimens were polished for 1minute using 600-grit sand paper. The samples were stored in distilled water at room temperature for 1 week and then worn by two-body abrasion test using "pin-on-disk" method (with distilled water under a 15-Nload at 0.05 m/s, for a distance of 100 meter with Steatite ceramic balls antagonists. A Profilometer was used for evaluating the surface wear. Data were analyzed with the one-way ANOVA. Results. Estelite Flow Quick exhibited 2708.9 ± 578.1 μm2 and Estelite Flow Quick High Flow exhibited 3206 ± 2445.1 μm2of wear but there were no significant differences between the groups. They demonstrated similar wear properties. Conclusion. Estelite flowable composite resins have wear resistance similar to nano- and micro-filled and micro-hybrid composite resins. Therefore, they can be recommended as pit and fissure sealant materials in the posterior region with appropriate mechanical characteristics.

  14. Fissure sealant materials: Wear resistance of flowable composite resins

    Science.gov (United States)

    Asefi, Sohrab; Eskandarion, Solmaz; Hamidiaval, Shadi

    2016-01-01

    Background. Wear resistance of pit and fissure sealant materials can influence their retention. Wear characteristics of sealant materials may determine scheduling of check-up visits. The aim of this study was to compare wear resistance of two flowable composite resins with that of posterior composite resin materials. Methods. Thirty-five disk-shaped specimens were prepared in 5 groups, including two flowable composite resins (Estelite Flow Quick and Estelite Flow Quick High Flow), Filtek P90 and Filtek P60 and Tetric N-Ceram. The disk-shaped samples were prepared in 25-mm diameter by packing them into a two-piece aluminum mold and then light-cured. All the specimens were polished for 1minute using 600-grit sand paper. The samples were stored in distilled water at room temperature for 1 week and then worn by two-body abrasion test using "pin-on-disk" method (with distilled water under a 15-Nload at 0.05 m/s, for a distance of 100 meter with Steatite ceramic balls antagonists). A Profilometer was used for evaluating the surface wear. Data were analyzed with the one-way ANOVA. Results. Estelite Flow Quick exhibited 2708.9 ± 578.1 μm2 and Estelite Flow Quick High Flow exhibited 3206 ± 2445.1 μm2of wear but there were no significant differences between the groups. They demonstrated similar wear properties. Conclusion. Estelite flowable composite resins have wear resistance similar to nano- and micro-filled and micro-hybrid composite resins. Therefore, they can be recommended as pit and fissure sealant materials in the posterior region with appropriate mechanical characteristics. PMID:27651887

  15. Evaluating the Microshear Bond Strength and Microleakage of Flowable Composites Containing Zinc Oxide Nano-particles

    OpenAIRE

    Teymoornezhad, Koorosh; Alaghehmand, Homayoun; Daryakenari, Ghazaleh; Khafri, Soraya; Tabari, Mitra

    2016-01-01

    Introduction Preventive resin restorations (PRR) are the conservative choice for the most common carious lesions in children. Thus, new age flowable resin composites with higher filler content are readily used. The aim of this study was to evaluate the microshear bond strength and microleakage of two flowable resin composites containing different percentages of nano zinc oxide (NZnO) particles, which have proven to have antimicrobial properties. Methods This experimental in-vitro study was ca...

  16. Synthesis of novel cobalt doped zinc oxide/carbon nano composite for the photocatalytic degradation of acid blue 113

    Directory of Open Access Journals (Sweden)

    S. Sunitha

    2015-03-01

    Full Text Available Cobalt doped Zinc Oxide/Carbon nano composite was synthesized by solution combustion method and characterized by X-ray diffractometer, field emission scanning electron microscope and energy dispersive X-ray spectroscopy analysis. This composite shows X-ray diffraction pattern that matched with nano particle of ZnO with wurtzite structure and average grain size was found to be 10.53 nm. . Further the presence of the elements like C, Co, Zn and O was confirmed by energy dispersive X-ray spectroscopy analysis. The effect of Co doping on the photocatalytic activity was investigated by photo degradation of the dye, acid blue 113. This nano composite exhibited better photocatalytic activity when compared to nano ZnO and nano ZnO/C composites.

  17. Electro-oxidation of methanol at the different carbon materials supported Pt nano-particles

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yu.; Zhang, Guojie; Zhou, Yiming; Tang, Yawen; Lu, Tianhong [The Laboratory of Electrochemistry, College of Chemistry and Material Science, Nanjing Normal University, 1 Wenyuan Road, Nanjing 210046 (China); Ma, Juan [Institute of Electrochemical Power Sources, Soochow University, Suzhou 215006 (China)

    2010-10-15

    Single-wall carbon nano-tubes (SWNTs), multi-wall carbon nano-tubes (MWNTs) and Vulcan XC-72 carbon (XC-72) are used as supporting carbon materials to prepare Pt/XC-72, Pt/SWNTs and Pt/MWNTs catalysts in tetrahydrofuran/water/ethanol mixture solution. Transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) measurements demonstrate that the type of supporting carbon material affects significantly the morphology and the electronic structure of supported Pt nano-particles (NPs). Electrochemical measurements indicate that the Pt/SWNTs catalyst exhibited the highest current density, the lowest onset oxidation potential and the best stability for methanol electro-oxidation among the three samples, indicating SWNTs are an ideal anode catalyst supporting material for the practical application of direct methanol fuel cells. (author)

  18. Effect of nano-composite and Thyme oil (Tymus Vulgaris L) coating on fruit quality of sweet cherry (Takdaneh Cv) during storage period

    OpenAIRE

    Nabifarkhani, Naser; Sharifani, Mehdi; Daraei Garmakhany, Amir; Ganji Moghadam, Ebrahim; Shakeri, Alireza

    2015-01-01

    Sweet cherry is one of the most appreciated fruit by consumers since it is an early season fruit and has an excellent quality. In this study effect of active nano composite formed from chitosan (as a matrix material), nano cellulose fiber (1% concentration) and Thyme oils (Tymus Vulgaris L) at 1% concentration on fruits quality was investigated. Treated fruits were stored at 1°C for 5 weeks and changes of different qualities attributes including weight loss, total acidity, TSS, anthocyanin, t...

  19. Fabrication, electrochemical and electrocatalytic properties of carbon nanotube@nano-SiO2BenV/phosphomolybdic acid polynary nanocomposite materials

    Science.gov (United States)

    Liu, Jiang; Wang, Jing; Wang, Wen-Bo; Chen, Meng; Qian, Dong-Jin

    2017-06-01

    Organic-inorganic nano-materials have attracted growing attention due to their potential applications for optoelectronic devices, sensors, and heterogeneous catalysts. We reported here on the preparation of polynary nanocomposites composed of poly(4-vinylpyridine) (P4VP) functionalized multi-walled carbon nanotubes (MWNTP4VP), silica nanoparticles (nano-SiO2), viologens, and/or phosphomolybdic acid (PMA), in which the MWNTP4VP, nano-SiO2, and viologens were covalently connected while PMA was electrostatically adsorbed. Thermogravimetric analysis revealed that the nanocomposites were composed of about 40-45% MWNTs, 40-45% nanoSiO2, as well as 10-15% organic species and others. The preparation processes and compositions of the nanocomposites were characterized using Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Field emission transmission electron microscopic images revealed that the nano-SiO2BenV particles were strongly attached to the MWNTP4VP surfaces to form MWNTP4VP@nano-SiO2BenV triad nano-cores. Cyclic voltammograms of the MWNTP4VP@nano-SiO2BenV casting films showed three couples of redox waves in the potential range between -0.8 and 0 V (vs Ag/AgCl), designated to the electron transfer process of viologen substituents of MWNTP4VP@nano-SiO2BenV2+ ↔ MWNTP4VP@nano-SiO2BenV+rad and their dimers. Further, three couples of redox waves were recorded for the casting films of MWNTP4VP@nano-SiO2BenV/PMA polynary nanocomposites in the potential range between -0.2 and 0.8 V, designated to three successive electron transfer processes of PMA. Finally, it was revealed that the present MWNTPVP@nano-SiO2BenV/PMA polynary composites could act as efficient heterogeneous catalysts for the electrocatalytic reduction of bromate.

  20. Effect of nano-Si3N4 surface treatment on the tribological performance of epoxy composite

    Directory of Open Access Journals (Sweden)

    2010-03-01

    Full Text Available To overcome the disadvantages generated by the loose nano-partilce agglomerates dispersed in polymer composites, a chemical grafting method was applied to modify nano-Si3N4 by covalently bonding glycidyl methacrylate (GMA onto the particles. The tribological behavior of the epoxy composite filled with nano-Si3N4 or GMA treated Si3N4 (Si3N4-g-PGMA was studied using a ring-on-block wear tester under dry sliding, and the worn surface of the filled epoxy composite and the surface roughness of the composites after the sliding wear test were investigated by SEM (scanning electron microscopy and AFM (atomic force microscopy, respectively. In comparison to the composites filled with untreated nano-Si3N4 particles, the composites with the grafted Sinano-3N4 exhibit improved sliding wear resistance and reduced friction coefficient owing to the chemical bonding at the filler/matrix interface.

  1. Center for Cement Composite Materials

    Science.gov (United States)

    1990-01-31

    pastes have shown that the matrix is microporous; mesopores are absent unless the material is allowed to dry out. This results in water adsorption at low...only to water. When subsequently dried a portion of3 the porosity is converted to larger mesopores . • Only about one third of the cement reacts in a...Frictional sliding, in this case was characterized by a decreasing slope in the loading curve followed by hysteresis in the unload/reloading curves

  2. Breakthroughs in Mesoporous Composite Materials

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Mesoporous materials have attracted a great deal of attention due to their extremely high surface area, uniform and tunable pore structure (2-50nm in diameter), and have been investigated extensively since its invention. Unfortunately,their catalytic properties are far away from the expectation due to their amorphous and inert framework and poor stability. This research project is aimed at the design and synthesis of mesoporous-

  3. A facile strategy for fabrication of nano-ZnO/yeast composites and their adsorption mechanism towards lead (II) ions

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Wei; Meng, Lingyin [College of Science, Sichuan Agricultural University, Yaan 625014 (China); Mu, Guiqin [Maize Research Institute of Sichuan Agricultural University, Wenjiang 611130 (China); Zhao, Maojun; Zou, Ping [College of Science, Sichuan Agricultural University, Yaan 625014 (China); Zhang, Yunsong, E-mail: yaanyunsong@126.com [College of Science, Sichuan Agricultural University, Yaan 625014 (China)

    2016-08-15

    Highlights: • Nano-ZnO/yeast composites were fabricated by alkali hydrothermal method. • Nano-ZnO was in-situ achieved and anchored on the yeast surface. • Alkali and hydrothermal process cause more exposed funcitional groups on yeast. • Nano-ZnO/yeast composites show higher Pb{sup 2+} adsorption ability than pristine yeast. • Nano-ZnO and exposed functional groups synergistically participate in adsorption. - Abstract: Nano-ZnO/yeast composites were successfully fabricated by one-step alkali hydrothermal method, and their adsorption properties for Pb{sup 2+} ions were also evaluated. Various influencing parameters of nano-ZnO/yeast composites, such as initial pH, contact time and initial Pb{sup 2+} concentration were investigated, respectively. The maximum adsorption capacity of nano-ZnO/yeast composites for Pb{sup 2+} (31.72 mg g{sup −1}) is 2.03 times higher than that of pristine yeast (15.63 mg g{sup −1}). The adsorption mechanism of nano-ZnO/yeast composites was studied by a series of techniques. Scanning electron microscopy (SEM) showed that nano-ZnO is evenly deposited on yeast surface. Atomic force microscopy (AFM) analysis exhibited that the yeast surface is rougher than that of pristine yeast. Energy dispersive X-ray detector (EDX) and X-ray diffraction (XRD) indicated the existence of nano-ZnO on yeast surface. Additionally, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) measurements further illustrated that alkali hydrothermal method causes not only the generation and anchorage of nano-ZnO on yeast surface but also the exposure of more functional groups (such as amino, carboxyl groups etc.) on yeast surface, both of which could adsorb Pb{sup 2+} via synergistic effect.

  4. Optimization of Nano-Carbon Materials for Hydrogen Sorption

    Energy Technology Data Exchange (ETDEWEB)

    Yakobson, Boris I [Rice University

    2013-08-02

    Research undertaken has added to the understanding of several critical areas, by providing both negative answers (and therefore eliminating expensive further studies of unfeasible paths) and positive feasible options for storage. Theoretical evaluation of the early hypothesis of storage on pure carbon single wall nanotubes (SWNT) has been scrutinized with the use of comprehensive computational methods (and experimental tests by the Center partners), and demonstrated that the fundamentally weak binding energy of hydrogen is not sufficiently enhanced by the SWNT curvature or even defects, which renders carbon nanotubes not practical media. More promising direction taken was towards 3-dimensional architectures of high porosity where concurrent attraction of H2 molecule to surrounding walls of nano-scale cavities can double or even triple the binding energy and therefore make hydrogen storage feasible even at ambient or somewhat lower temperatures. An efficient computational tool has been developed for the rapid capacity assessment combining (i) carbon-foam structure generation, (ii) accurate empirical force fields, with quantum corrections for the lightweight H2, and (iii) grand canonical Monte Carlo simulation. This made it possible to suggest optimal designs for carbon nanofoams, obtainable via welding techniques from SWNT or by growth on template-zeolites. As a precursor for 3D-foams, we have investigated experimentally the synthesis of VANTA (Vertically Aligned NanoTube Arrays). This can be used for producing nano-foams. On the other hand, fluorination of VANTA did not show promising increase of hydrogen sorption in several tests and may require further investigation and improvements. Another significant result of this project was in developing a fundamental understanding of the elements of hydrogen spillover mechanisms. The benefit of developed models is the ability to foresee possible directions for further improvement of the spillover mechanism.

  5. Preliminary biocompatible evaluation of nano-hydroxyapatite/polyamide 66 composite porous membrane

    OpenAIRE

    Yili Qu; Ping Wang; Yi Man; et al

    2010-01-01

    Yili Qu1,3, Ping Wang1,3, Yi Man1, Yubao Li2, Yi Zuo2, Jidong Li21State Key Laboratory of Oral Diseases, Sichuan University, Chengdu 610064, China; 2Research Center for Nano-Biomaterials, Analytical and Testing Center, Sichuan University, Chengdu 610064, China; 3These authors contributed equally to this workAbstract: Nano-hydroxyapatite/polyamide 66 (nHA/PA66) composite with good bioactivity and osteoconductivity was employed to develop a novel porous membrane with asymmetric structure for gu...

  6. Pre-PET Graft Modification of Nano-ZrO2 and Its Effect on Mechanical Property of PC Composites

    Institute of Scientific and Technical Information of China (English)

    LI Li; SHI Li-yi; CAO Shao-mei; FENG Xin; ZHANG Yu

    2009-01-01

    Nano-ZrO2 panicles were modified by poly ( ethylene terephalate ) prepolymer ( pre-PET ) via polycondensation. FT-IR, TEM, and TGA results showed that pre-PET was successfully grafted on the surface of uano-ZrO2 particles. Compared to the original nano-ZrO2, the grafted nano-ZrO2 had better compatibility with the polycarbonate (PC) matrix and could be dispersed more homogeneously in PC. Hence, interracial adhesion between ZrO2 and PC was enhanced. The mechanical properties of the resultant PC/nano-ZrO2 composite like tensile strength and notched impact strength were greatly improved. Calculated respectively from tensile yield stress PC/nano-ZrO2 composites, the interfacial interaction parameter B was employed to quantitatively characterize the effective interfacial interaction between the nano-ZrO2 and PC matrix.

  7. Indirect composite resin materials for posterior applications.

    Science.gov (United States)

    Shellard, E; Duke, E S

    1999-12-01

    Indirect composite resin restorations were introduced a number of years ago as possible alternatives to traditional metallic or ceramic-based indirect restorations. However, the earlier formulations did not provide evidence of improvement in mechanical and physical properties over chairside-placed direct composite resin materials. Because they required more tooth structure removal than direct restorations, their use became unpopular and was abandoned by most clinicians. Over the past few years, a new class of composite resin indirect materials has surfaced in the profession. Various technologies have been suggested as reinforcement mechanisms. Fibers, matrix modifications, and an assortment of innovations have been proposed for enhancing indirect composite resin restorations. Applications are from inlay restorations all the way to multi-unit fixed prostheses. This manuscript summarizes some of the progress made in this area. When available, data is presented to provide clinicians with guidelines and indications for the use of these materials.

  8. Multifunctional Laminated Composite Materials for Protective Clothing

    Directory of Open Access Journals (Sweden)

    Nermin M. Aly

    2014-10-01

    Full Text Available Protective clothing performs a vital role in maintaining the safety of human in workplace. The developments in this field are proceeding to fulfill the needs with multifunctional materials at competitive costs. Recently, the protective clothing field introduces the usage of composite materials taking advantage of their outstanding properties. In this paper, the multifunctional performance of hybrid laminated composites (HLC was investigated aiming to be utilized in protective clothing. The influences of reinforcement and resin properties on the physical properties of the laminated composites and their resistance to puncture load and UV transmittance were studied. ANOVA test was used for the statistical analysis of the results. The results showed that, the reinforcement material and structure and the fiber/matrix interface have major influences on the laminated composites performance. It was revealed that, the HLC fabricated from (polyester/glass fabric with satin 4 structure and nonwoven glass fiber mat exhibited the best functional performance.

  9. Nano-Ammonium Perchlorate: Preparation, Characterization, and Evaluation in Composite Propellant Formulation

    Science.gov (United States)

    Kumari, A.; Mehilal; Jain, S.; Jain, M. K.; Bhattacharya, B.

    2013-07-01

    Nanomaterials are finding applications in explosives and propellant formulations due to their large surface area and high surface energy. This high surface energy is responsible for the low activation energy and increase in burning rate of the composition. Therefore, a successful attempt has been made to prepare nano-ammonium perchlorate using a nonaqueous method by dissolving ammonium perchlorate (AP) in methanol followed by adding the dissolved AP to the hydroxyl-terminated polybutadiene (HTPB), homogenization, and vacuum distillation of the solvent. The nano-AP thus formed was characterized using a NANOPHOX particle size analyzer (Sympatec, Germany), transmission electron microscopy (FEI, Hillsboro, OR), X-ray diffraction (PANalytical B.V., The Netherlands) and scanning electron microscopy (Ikon Analytical Equipment Pvt. Ltd., Mumbai, India) for particle size, purity, and morphology, respectively. The thermal behavior of nano-AP was also studied using differential thermal analysis-thermo gravimetric analysis (DTA-TGA). The data indicated that the particle size of the prepared AP was in the range of 21-52 nm and the thermal decomposition temperature was lower than that of coarse AP. Characterized nano-AP was subsequently used in composite propellant formulation up to 5% with 86% solid loading and studied for different properties. The results showed a 14% increase in burning rate in comparison to standard propellant composition with desired mechanical properties.

  10. ZnO micro-nano composite hydrophobic film prepared by the three-step method

    Institute of Scientific and Technical Information of China (English)

    Ma Kai; Li Hua; Zhang Han; Xu Xiao-Liang; Gong Mao-Gang; Yang Zhou

    2009-01-01

    The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prcpared via the three-step method. On thin buffer films of SiO2, which were first fabricated on glass substrates by the sol gel dip-coating method, a ZnO seed layer was deposited via RF magnetron sputtering. Then two different ZnO films, micro-nano and micro-only flower-like structures, were grown by the hydrothermal method. The prepared films have different hydrophobic properties after surface modification. The structures of the obtained ZnO films were characterized using x-ray diffraction and field-emission scanning electron microscopy. A conclusion that a micro-nano composite structure is more beneficial to hydrophobicity than a micro-only structure was obtained through research into the effect of structure on hydrophobic properties.

  11. ZnO micro-nano composite hydrophobic film prepared by the three-step method

    Science.gov (United States)

    Ma, Kai; Li, Hua; Zhang, Han; Xu, Xiao-Liang; Gong, Mao-Gang; Yang, Zhou

    2009-05-01

    The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prepared via the three-step method. On thin buffer films of SiO2, which were first fabricated on glass substrates by the sol-gel dip-coating method, a ZnO seed layer was deposited via RF magnetron sputtering. Then two different ZnO films, micro-nano and micro-only flower-like structures, were grown by the hydrothermal method. The prepared films have different hydrophobic properties after surface modification. The structures of the obtained ZnO films were characterized using x-ray diffraction and field-emission scanning electron microscopy. A conclusion that a micro-nano composite structure is more beneficial to hydrophobicity than a micro-only structure was obtained through research into the effect of structure on hydrophobic properties.

  12. Polymer-ionic liquid nano-composites electrolytes: Electrical, thermal and morphological properties

    Energy Technology Data Exchange (ETDEWEB)

    Missan, Harinder Pal Singh, E-mail: harinder.missan@sta.uwi.edu [Fuel Cell Materials Research Lab, Department of Physics, University of West Indies, St. Augustine, Trinidad and Tobago, West Indies (Trinidad and Tobago); Lalia, Boor Singh [Fuel Cell Materials Research Lab, Department of Physics, University of West Indies, St. Augustine, Trinidad and Tobago, West Indies (Trinidad and Tobago); Karan, Kunal [Fuel Cell Research Center, Queens University, Kingston, Ontario, K7L 5L9 (Canada); Maxwell, Anderson [Department of Chemistry, University of West Indies, St. Augustine, Trinidad and Tobago, West Indies (Trinidad and Tobago)

    2010-11-25

    Room temperature ionic liquid (IL): 1-methyl-3-hexylimidazolium imide (HxMImTFSI) has been synthesized showing a high conductivity value of 4.3 mS/cm at room temperature. Polymer electrolytes (PEs) have been developed by impregnating the RTIL in poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF-HFP) matrix with different binary compositions which have different molecular weights. PE's that are synthesized with the polymer having an average molecular weight of 400,000 shows highest room temperature conductivity of 4.86 x 10{sup -4} S/cm at room temperature for (3:7 weight ratio). The nano-composite polymer electrolytes (NCPEs) were prepared by dispersing nano-tubular titania in the PE. Thermal stability of the IL and NCPEs was investigated using TGA (Thermogravimetric Analysis) and DSC (Differential Scanning Calorimetric) studies showing the stability of these electrolytes in excess of 250 deg. C. High ionic conductivity has been observed of the order of 10{sup -4} S/cm at RT and 10{sup -3} S/cm at 120 deg. C for NCPE having composition 3:7 ratio of polymer and IL and containing 2 wt% nano-tubular titania. SEM studies show that there is an improvement in the morphology of the NCPEs with the addition of nano-tubular titania.

  13. Hertzian Load-bearing Capacity of Hybrid and Nano-hybrid Resin Composites Stored Dry and Wet

    Directory of Open Access Journals (Sweden)

    Farmani S

    2016-03-01

    Full Text Available Statement of Problem: Hertzian indentation test has been proven to be an efficient and reliable alternative upon Vickers hardness test. This method has been used to test dental ceramics, amalgams, glass ionomers and luting cements.There is limited published information about the load-bearing capacity of resin composites using Hertizian indentation test. Objectives: To investigate the load-bearing capacity of hybrid and nano-hybrid resin composites stored dry or wet up to 30 days, using Hertzian indentation test. Materials and Methods: Three resin composites were used: two nano-hybrids (Filtek Supreme, and Luna and one hybrid, (Rok. A total of 108 disc-shaped specimens (1mm thick x 10 mm diameter were prepared using polyethylene mould. The specimens of each material were randomly divided into 6 groups of 6 (n=6 and stored at 370C either in distilled water or dry for 1, 7 and 30 days. The specimens were tested using Hertzian jig aligned in the universal testing machine. The specimen was placed on the top of a disc-shaped substrate. The load was applied at the center of each specimen and the load at the first crack was recorded. Data were analyzed by ANOVA, Tukey’sand student’s t-test using SPSS version 18.0. Results: Three-way ANOVA showed a significant interaction between all the factors (p = .0001. The load bearing capacity of almost all materials reduced significantly in the wet condition in comparison with the dry condition (p = .0001. After seven days of immersion in distilled water, Filtek Supreme had significantly lower values than those of Rok and Luna, there was no significant differences between materials in the dry condition. Conclusions:In contrast to dry condition, the load-bearing capacity of specimens stored in distilled water decreased significantly over the 30 days of immersion. The load bearing capacity of nano-hybrid composites tested in this study was shown to be comparable with that of the hybrid composite.

  14. Realization of High-temperature Superconductivity in Nano-carbon Materials and Its Application

    Science.gov (United States)

    2015-07-13

    hottest topics in condensed matter physics and also for application to zero- emission energy system. In particular, carbon-based superconductors have...nano- carbon materials and its application II 5a. CONTRACT NUMBER FA2386-13-1-4059 5b. GRANT NUMBER Grant 13RSZ067_134059 5c. PROGRAM ELEMENT...for AOARD Grant F A2386-13- l-4059 "Realization of high-temperature superconductivity in nano-carbon materials and its application " Date: 07/13

  15. Bio-Nano ECRIS: an electron cyclotron resonance ion source for new materials production.

    Science.gov (United States)

    Uchida, T; Minezaki, H; Tanaka, K; Muramatsu, M; Asaji, T; Kato, Y; Kitagawa, A; Biri, S; Yoshida, Y

    2010-02-01

    We developed an electron cyclotron resonance ion source (ECRIS) for new materials production on nanoscale. Our main target is the endohedral fullerenes, which have potential in medical care, biotechnology, and nanotechnology. In particular, iron-encapsulated fullerene can be applied as a contrast material for magnetic resonance imaging or microwave heat therapy. Thus, our new ECRIS is named the Bio-Nano ECRIS. In this article, the recent progress of the development of the Bio-Nano ECRIS is reported: (i) iron ion beam production using induction heating oven and (ii) optimization of singly charged C(60) ion beam production.

  16. Insensitive high-energy energetic structural material of tungsten-polytetrafluoroethylene-aluminum composites

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Liu; Liu, Jinxu, E-mail: liujinxu@bit.edu.cn; Zhang, Xinbo [School of Material Science and Engineering, Beijing Institute of Technology, No.5 yard, Zhong Guan Cun South Street, Beijing, 100081 (China); Li, Shukui [School of Material Science and Engineering, Beijing Institute of Technology, No.5 yard, Zhong Guan Cun South Street, Beijing, 100081 (China); State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, No. 5 yard, Zhong Guan Cun South Street, Beijing 100081 (China)

    2015-11-15

    Energetic structural material is a kind of materials that are inert under normal conditions but could produce exothermic chemical reaction when subjected to impact. This report shows a kind of energetic structural material of tungsten (W)-polytetrafluoroethylene (PTFE)-aluminum (Al) with density of 4.12 g/cm{sup 3}, excellent ductility and dynamic compressive strength of 96 MPa. Moreover, 50W-35PTFE-15Al (wt%) can exhibit a high reaction energy value of more than 2 times of TNT per unit mass and 5 times of TNT per unit volume, respectively, but with excellent insensitivity compared with traditional explosives. Under thermal conditions, the W-PTFE-Al composite can keep stable at 773 K. Under impact loading, when the strain rate up to ∼4820 s{sup −1} coupled with the absorbed energy per unit volume of 120 J/cm{sup 3}, deflagration occurs and combustion lasts for 500 μs. During impact compressive deformation, the PTFE matrix is elongated into nano-fibers, thus significantly increases the reaction activity of W-PTFE-Al composites. The nano-fiber structure is necessary for the reaction of W-PTFE-Al composites. The formation of PTFE nano-fibers must undergo severe plastic deformation, and therefore the W-PTFE-Al composites exhibit excellent insensitivity and safety. Furthermore, the reaction mechanisms of W-PTFE-Al composites in argon and in air are revealed.

  17. Insensitive high-energy energetic structural material of tungsten-polytetrafluoroethylene-aluminum composites

    Directory of Open Access Journals (Sweden)

    Liu Wang

    2015-11-01

    Full Text Available Energetic structural material is a kind of materials that are inert under normal conditions but could produce exothermic chemical reaction when subjected to impact. This report shows a kind of energetic structural material of tungsten (W-polytetrafluoroethylene (PTFE-aluminum (Al with density of 4.12 g/cm3, excellent ductility and dynamic compressive strength of 96 MPa. Moreover, 50W-35PTFE-15Al (wt% can exhibit a high reaction energy value of more than 2 times of TNT per unit mass and 5 times of TNT per unit volume, respectively, but with excellent insensitivity compared with traditional explosives. Under thermal conditions, the W-PTFE-Al composite can keep stable at 773 K. Under impact loading, when the strain rate up to ∼4820 s−1 coupled with the absorbed energy per unit volume of 120 J/cm3, deflagration occurs and combustion lasts for 500 μs. During impact compressive deformation, the PTFE matrix is elongated into nano-fibers, thus significantly increases the reaction activity of W-PTFE-Al composites. The nano-fiber structure is necessary for the reaction of W-PTFE-Al composites. The formation of PTFE nano-fibers must undergo severe plastic deformation, and therefore the W-PTFE-Al composites exhibit excellent insensitivity and safety. Furthermore, the reaction mechanisms of W-PTFE-Al composites in argon and in air are revealed.

  18. Application progress of rare earth nano-materials

    Institute of Scientific and Technical Information of China (English)

    Xiao Zhe

    2009-01-01

    @@ Total rare earth consumption exceeded 72,600 tREO domestically in China in 2007, among which over 38,500 tREO were consumed in functional materials like permanent magnetic materials, fluorescent materials, hydrogen storage materials, catalytic materials and polishing powders,representing 53% of total RE consumption. Production and application of RE performance materials have been the main force promoting the development of China rare earth industry.

  19. Deciphering the structure of nano-nickel composites

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Oliver K [Los Alamos National Laboratory

    2009-01-01

    A model has been developed to predict piezoresistivity in Silicone/Nickel Nanostrand composites. This model combines the theory of quantum mechanical tunneling with percolation theory to obtain macroscopic composite resistivity as a function of strain from quantum mechanical principles and statistical characterization of constituent morphology. It has been shown that a model incorporating quantum mechanical tunneling and percolation theory can be used to predict piezoresistivity in Silicone/Nickel Nanostrand composites. The predictions of this model qualitatively demonstrate the large drop in resistivity with strain that these composites exhibit. The quantitative accuracy of the model was shown to be usually within one order of magnitude. Further work must be done to obtain an empirical distribution of inter-nanostrand gap distances, the tunneling barrier height ({lambda}), and the fraction of conductive junctions as a function of strain for these composites.

  20. Soundproofing effect of nano particle reinforced polymer composites

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Chul; Hong, Young Sun; Nan, Ri Guang; Ahn, Sung Hoon; Kang, Yeon Jun [Seoul National University, Seoul (Korea, Republic of); Jang, Moon Kyu [LS Cable Ltd., Anyang (Korea, Republic of); Lee, Caroline S. [Hanyang University, Ansan (Korea, Republic of)

    2008-08-15

    In this paper, the effects of soundproofing by polymer and carbon-nanotube (CNT) composites were investigated. The specimens for sound insulation measurement were fabricated with Acrylonitrile Butadiene Styrene (ABS)/CNT composites. Tests showed that sound transmission loss of ABS/CNT 15 vol.% composite was higher by 21.7% (4.1 dB) than that of pure ABS specimen at a frequency of 3400 Hz. It was found that the principal factor influencing the improvement of sound insulations of ABS/CNT composites was increased stiffness by CNT additives. To demonstrate the practical applicability of polymer/CNT composites, tests were conducted for the reduction of operational noise from mechanical relay

  1. Finite Element Model Characterization Of Nano-Composite Thermal And Environmental Barrier Coatings

    Science.gov (United States)

    Yamada, Yoshiki; Zhu, Dongming

    2011-01-01

    Thermal and environmental barrier coatings have been applied for protecting Si based ceramic matrix composite components from high temperature environment in advanced gas turbine engines. It has been found that the delamination and lifetime of T/EBC systems generally depend on the initiation and propagation of surface cracks induced by the axial mechanical load in addition to severe thermal loads. In order to prevent T/EBC systems from surface cracking and subsequent delamination due to mechanical and thermal stresses, T/EBC systems reinforced with nano-composite architectures have showed promise to improve mechanical properties and provide a potential crack shielding mechanism such as crack bridging. In this study, a finite element model (FEM) was established to understand the potential beneficial effects of nano-composites systems such as SiC nanotube-reinforced oxide T/EBC systems.

  2. Preparation and Characterization of Fe2O3/Al2O3 Nano-composites

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Al2O3/Fe2O3 nano-composites were prepared by sol-gel route. The effect of Fe2O3 content on the structure, grain size and characterization of the composite were investigated through X-ray diffraction and M(o)ssbauer spectrum. The X-ray diffraction results show that Al2O3/Fe2O3 nano-composites with the Fe2O3, content of 40 wt% can be obtained after heat-treated at 900℃. The M(o)ssbauer effect results show that all samples exhibit clear super-paramagnetic phenomenon. Particles grow and defects reduce with the increasing of Fe2O3 conteni and some α-Fe2O3 stay magnetic order.

  3. Characterizations of nano-TiO{sub 2}/diatomite composites and their photocatalytic reduction of aqueous Cr (VI)

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Qing; Li, Hui; Zheng, Shuilin, E-mail: shuilinzh@sina.com; Sun, Zhiming, E-mail: szmcumtb@hotmail.com

    2014-08-30

    Graphical abstract: Nano-TiO{sub 2}/diatomite (DIA) composites were successfully synthesized by a typical hydrolysis precipitation method. The composites show good photocatalytic activity and stability for aqueous Cr (VI) removal. - Highlights: • TiO{sub 2} nanoparticles/diatomite composite was synthesized and characterized. • The composite exhibited a good photocatalytic performance in Cr (VI) reduction. • The photocatalyst showed good photocatalytic stability. • The composite is a promising material for Cr (VI) photocatalytic reduction. - Abstract: In this paper, the TiO{sub 2} nanoparticles were immobilized on diatomite (DIA) via a typical hydrolysis precipitation process using TiCl{sub 4} as precursor. The as-prepared composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). TiO{sub 2} nanoparticles with the average grain size of around 7–14 nm were well deposited on the surface of diatomite. The photocatalytic activity toward the reduction of aqueous Cr (VI) was demonstrated under UV light. The influence of initial pH values, catalyst amount, illumination intensity and initial concentration of Cr (VI) on photocatalytic reduction of Cr (VI) were investigated. Compared with the commercial TiO{sub 2} (P25, Degussa), the TiO{sub 2}/DIA composites had better reactive activity because of their relatively higher adsorption capacity. Furthermore, the prepared photocatalyst exhibited relatively good photocatalytic stability depending on the reusability tests.

  4. Nano-cluster stability following neutron irradiation in MA957 oxide dispersion strengthened material

    Energy Technology Data Exchange (ETDEWEB)

    Ribis, J., E-mail: joel.ribis@cea.fr [CEA, DEN, DMN, SRMA, F-91191 Gif sur Yvette (France); Lozano-Perez, S. [Department of Materials, University of Oxford, Parks Road, OX1 3PH Oxford (United Kingdom)

    2014-01-15

    ODS steels are promising materials for Sodium cooled Fast Reactors since their fine distribution of nano-clusters confers excellent mechanical properties. However, the nano-feature stability needs to be assessed under neutron irradiation. Before irradiation, the characterizations show that nano-particles are finely distributed within the ferritic matrix and are identified to have a pyrochlore type structure. After irradiation of the MA957 alloy in the Phenix French reactor at 412 °C up to 50 dpa and 430 °C up to 75 dpa, transmission electron microscopy characterization reveals a very slight density fall but no distinguishable difference in nano-features size before and after irradiation. In addition, after both irradiations, the nano-oxides are still (Y, Ti, O) compounds with orientation relationship with the matrix. A multislice simulation of high resolution images suggests that nano-particles still have a fcc pyrochlore type structure after irradiation. A possible change of lattice parameter seems to be highlighted, possibly due to disordering by cascade effect.

  5. Development of construction materials using nano-silica and aggregates recycled from construction and demolition waste.

    Science.gov (United States)

    Mukharjee, Bibhuti Bhusan; Barai, Sudhirkumar V

    2015-06-01

    The present work addresses the development of novel construction materials utilising commercial grade nano-silica and recycled aggregates retrieved from construction and demolition waste. For this, experimental work has been carried out to examine the influence of nano-silica and recycled aggregates on compressive strength, modulus of elasticity, water absorption, density and volume of voids of concrete. Fully natural and recycled aggregate concrete mixes are designed by replacing cement with three levels (0.75%, 1.5% and 3%) of nano-silica. The results of the present investigation depict that improvement in early days compressive strength is achieved with the incorporation of nano-silica in addition to the restoration of reduction in compressive strength of recycled aggregate concrete mixes caused owing to the replacement of natural aggregates by recycled aggregates. Moreover, the increase in water absorption and volume of voids with a reduction of bulk density was detected with the incorporation of recycled aggregates in place of natural aggregates. However, enhancement in density and reduction in water absorption and volume of voids of recycled aggregate concrete resulted from the addition of nano-silica. In addition, the results of the study reveal that nano-silica has no significant effect on elastic modulus of concrete.

  6. Nano-cluster stability following neutron irradiation in MA957 oxide dispersion strengthened material

    Science.gov (United States)

    Ribis, J.; Lozano-Perez, S.

    2014-01-01

    ODS steels are promising materials for Sodium cooled Fast Reactors since their fine distribution of nano-clusters confers excellent mechanical properties. However, the nano-feature stability needs to be assessed under neutron irradiation. Before irradiation, the characterizations show that nano-particles are finely distributed within the ferritic matrix and are identified to have a pyrochlore type structure. After irradiation of the MA957 alloy in the Phenix French reactor at 412 °C up to 50 dpa and 430 °C up to 75 dpa, transmission electron microscopy characterization reveals a very slight density fall but no distinguishable difference in nano-features size before and after irradiation. In addition, after both irradiations, the nano-oxides are still (Y, Ti, O) compounds with orientation relationship with the matrix. A multislice simulation of high resolution images suggests that nano-particles still have a fcc pyrochlore type structure after irradiation. A possible change of lattice parameter seems to be highlighted, possibly due to disordering by cascade effect.

  7. Metal-nanotube composites as radiation resistant materials

    Energy Technology Data Exchange (ETDEWEB)

    González, Rafael I.; Valencia, Felipe; Mella, José; Kiwi, Miguel, E-mail: m.kiwi.t@gmail.com [Departamento de Física, Facultad de Ciencias, CEDENNA, Universidad de Chile, Casilla 653, Santiago 7800024 (Chile); Duin, Adri C. T. van [Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States); So, Kang Pyo; Li, Ju [Department of Nuclear Science and Engineering and Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Bringa, Eduardo M. [CONICET and Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Cuyo, Mendoza 5500 (Argentina)

    2016-07-18

    The improvement of radiation resistance in nanocomposite materials is investigated by means of classical reactive molecular dynamics simulations. In particular, we study the influence of carbon nanotubes (CNTs) in an Ni matrix on the trapping and possible outgassing of He. When CNTs are defect-free, He atoms diffuse alongside CNT walls and, although there is He accumulation at the metal-CNT interface, no He trespassing of the CNT wall is observed, which is consistent with the lack of permeability of a perfect graphene sheet. However, when vacancies are introduced to mimic radiation-induced defects, He atoms penetrate CNTs, which play the role of nano-chimneys, allowing He atoms to escape the damaged zone and reduce bubble formation in the matrix. Consequently, composites made of CNTs inside metals are likely to display improved radiation resistance, particularly when radiation damage is related to swelling and He-induced embrittlement.

  8. Scalable synthesis and energy applications of defect engineeered nano materials

    Science.gov (United States)

    Karakaya, Mehmet

    Nanomaterials and nanotechnologies have attracted a great deal of attention in a few decades due to their novel physical properties such as, high aspect ratio, surface morphology, impurities, etc. which lead to unique chemical, optical and electronic properties. The awareness of importance of nanomaterials has motivated researchers to develop nanomaterial growth techniques to further control nanostructures properties such as, size, surface morphology, etc. that may alter their fundamental behavior. Carbon nanotubes (CNTs) are one of the most promising materials with their rigidity, strength, elasticity and electric conductivity for future applications. Despite their excellent properties explored by the abundant research works, there is big challenge to introduce them into the macroscopic world for practical applications. This thesis first gives a brief overview of the CNTs, it will then go on mechanical and oil absorption properties of macro-scale CNT assemblies, then following CNT energy storage applications and finally fundamental studies of defect introduced graphene systems. Chapter Two focuses on helically coiled carbon nanotube (HCNT) foams in compression. Similarly to other foams, HCNT foams exhibit preconditioning effects in response to cyclic loading; however, their fundamental deformation mechanisms are unique. Bulk HCNT foams exhibit super-compressibility and recover more than 90% of large compressive strains (up to 80%). When subjected to striker impacts, HCNT foams mitigate impact stresses more effectively compared to other CNT foams comprised of non-helical CNTs (~50% improvement). The unique mechanical properties we revealed demonstrate that the HCNT foams are ideally suited for applications in packaging, impact protection, and vibration mitigation. The third chapter describes a simple method for the scalable synthesis of three-dimensional, elastic, and recyclable multi-walled carbon nanotube (MWCNT) based light weight bucky-aerogels (BAGs) that are

  9. Bio-Based Nano Composites from Plant Oil and Nano Clay

    Science.gov (United States)

    Lu, Jue; Hong, Chang K.; Wool, Richard P.

    2003-03-01

    We explored the combination of nanoclay with new chemically functionalized, amphiphilic, plant oil resins to form bio-based nanocomposites with improved physical and mechanical properties. These can be used in many new applications, including the development of self-healing nanocomposites through controlled reversible exfoliation/intercalation, and self-assembled nano-structures. Several chemically modified triglyceride monomers of varying polarity, combined with styrene (ca 30include acrylated epoxidized soybean oil (AESO), maleated acrylated epoxidized soybean oil (MAESO) and soybean oil pentaerythritol glyceride maleates (SOPERMA), containing either hydroxyl group or acid functionality or both. The clay used is a natural montmorillonite modified with methyl tallow bis-2-hydroxyethyl quaternary ammonium chloride, which has hydroxyl groups. Both XRD and TEM showed a completely exfoliated structure at 3 wtwhen the clay content is above 5 wtconsidered a mix of intercalated and partially exfoliated structure. The controlled polarity of the monomer has a major effect on the reversible dispersion of clay in the polymer matrix. The bio-based nanocomposites showed a significant increase in flexural modulus and strength. Supported by EPA and DoE

  10. Evaluation of Shear Bond Strength of Methacrylate- and Silorane-based Composite Resin Bonded to Resin-Modified Glass-ionomer Containing Micro- and Nano-hydroxyapatite.

    Science.gov (United States)

    Sharafeddin, Farahnaz; Moradian, Marzie; Motamedi, Mehran

    2016-06-01

    The adhesion of resin-modified glass-ionomer (RMGI) to composite resin has a very important role in the durability of sandwich restorations. Hydroxyapatite is an excellent candidate as a filler material for improving the mechanical properties of glass ionomer cement. The aim of this study was to assess the effect of adding micro- and nano-hydroxyapatite (HA) powder to RMGI on the shear bond strength (SBS) of nanofilled and silorane-based composite resins bonded to RMGI containing micro- and nano-HA. Sixty cylindrical acrylic blocks containing a hole of 5.5×2.5 mm (diameter × height) were prepared and randomly divided into 6 groups as Group 1 with RMGI (Fuji II LC) plus Adper Single Bond/Z350 composite resin (5.5×3.5 mm diameter × height); Group 2 with RMGI containing 25 wt% of micro-HA plus Adper Single Bond/Z350 composite resin; Group3 with RMGI containing 25 wt% of nano-HA plus Adper Single Bond/Z350 composite resin; Group 4 with RMGI plus P90 System Adhesive/P90 Filtek composite resin (5.5×3.5 mm diameter × height); Group 5 with RMGI containing 25 wt% of micro-HA plus P90 System Adhesive/P90Filtek composite resin; and Group 6 with RMGI containing 25 wt% of nano-HA plus P90 System Adhesive/P90 Filtek composite resin. The specimens were stored in water (37° C, 1 week) and subjected to 1000 thermal cycles (5°C/55°C). SBS test was performed by using a universal testing machine at a crosshead speed of 1 mm/min. Data were analyzed by two-way ANOVA and Tukey test (pcomposite resins. Meanwhile, RMGI without HA has the best bond strength to silorane-based composite resins.

  11. Formation of Al/B4C Surface Nano-composite Layers on 7075 Al Alloy Employing Friction Stir Processing

    Science.gov (United States)

    Kashani-Bozorg, S. F.; Jazayeri, K.

    2009-06-01

    Al/B4C surface nano-composite layers was achieved on commercial 7075 Al substrate employing friction stir processing technique. Agglomeration of B4C particles was occurred after a single pass. The dispersion of B4C particles was found to be affected by the number of FSP passes. A distribution of nano-size B4C particle was achieved after four passes. Moreover, the increasing in number of FSP passes causes a decreasing in matrix grain size of the surface nano-composite layer. The micro hardness of the surface nano-composite layer improves by almost two times as compared to that of the as-received substrate; this is attributed to the finer matrix grains and dispersion of nano-sized B4C particles.

  12. Synthesis and characterization of new polyimide/organo clay nano composites containing benzophenone moieties in the main chain

    Energy Technology Data Exchange (ETDEWEB)

    Faghihi, K.; Ashouri, M.; Feyzi, A., E-mail: k-faghihi@araku.ac.ir [Arak University, Faculty of Science, Organic Polymer Chemistry Research Laboratory, 38158-879 Arak (Iran, Islamic Republic of)

    2013-08-01

    A series of nano composites consist of organic polyimide and organo-modified clay content varying from 0 to 5 wt %, were successfully prepared by in situ polymerization. Polyimide used as a matrix of nano composite was prepared through the reaction of 1,4-bis [4-aminophenoxy] butane and 3,3,4,4-benzophenone tetra carboxylic dianhydride in N,N-dimethylacetamide (Dmac). The resulting nano composite films were characterized by Ft-IR spectroscopy, X-ray diffraction, scanning electron microscopy and thermogravimetric analysis. (Author)

  13. Color stability of different composite resin materials.

    Science.gov (United States)

    Falkensammer, Frank; Arnetzl, Gerwin Vincent; Wildburger, Angelika; Freudenthaler, Josef

    2013-06-01

    Data are needed to better predict the color stability of current composite resin materials. The purpose of this study was to evaluate the impact of different storage solutions on the color stability of different composite resin materials. Different restorative and adhesive composite resin specimens (dual-polymerizing self-adhesive resin cement, autopolymerizing resin-based composite resin, dual-polymerizing resin-based composite resin, nanohybrid composite resin, and microhybrid composite resin) were fabricated and stored in red wine, black tea, chlorhexidine, sodium fluoride, tea tree oil, or distilled water for 4 weeks at 37°C. Color parameters were measured with a colorimeter before and after storage. Total color differences and specific coordinate differences were expressed as ΔE, ΔL, Δa, and Δb. A 2-way and 1-way analysis of variance (ANOVA) with Bonferroni adjustment for multiple comparisons were applied for statistical calculations (α=.05). Red wine caused the most severe discoloration (ΔE >10), followed by black tea with perceptible (ΔE >2.6) to clinically unacceptable discoloration (ΔE >5.5). Colored mouth rinses discolored the materials to a lesser extent with clinically acceptable values. Dual-polymerizing resin adhesives showed a higher amount of discoloration. Current restorative and adhesive composite resin materials discolor over time under the influence of different storage solutions. The composition related to the polymerizing mode seemed to be a causative factor. Copyright © 2013 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

  14. Lightweight, High Strength Nano-Composite Magnesium for Radiators Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this Phase I SBIR, Terves will develop processing routes to produce high thermal conductivity magnesium composites for use in heat transfer applications such as...

  15. Processes for fabricating composite reinforced material

    Energy Technology Data Exchange (ETDEWEB)

    Seals, Roland D.; Ripley, Edward B.; Ludtka, Gerard M.

    2015-11-24

    A family of materials wherein nanostructures and/or nanotubes are incorporated into a multi-component material arrangement, such as a metallic or ceramic alloy or composite/aggregate, producing a new material or metallic/ceramic alloy. The new material has significantly increased strength, up to several thousands of times normal and perhaps substantially more, as well as significantly decreased weight. The new materials may be manufactured into a component where the nanostructure or nanostructure reinforcement is incorporated into the bulk and/or matrix material, or as a coating where the nanostructure or nanostructure reinforcement is incorporated into the coating or surface of a "normal" substrate material. The nanostructures are incorporated into the material structure either randomly or aligned, within grains, or along or across grain boundaries.

  16. Microstructure of Nano-Y2O3/Cobalt Based Alloy Composite Coating by Laser Cladding

    Institute of Scientific and Technical Information of China (English)

    何宜柱; 李明喜; 袁晓敏; 斯松华

    2004-01-01

    Composite coatings made of nano-Y2O3/cobalt-based alloy and produced by crosscurrent CO2 laser on Ni-based superalloy are introduced. Cross-section or surface of the coatings was examined to reveal their microstructure using optical microscope,SEM,including EDS microanalysis,TEM and XRD. The results show that some equilibrium or non-equilibrium phases,such as γ-Co,Cr23C6,Y2O3 and ε-Co exist in the coatings. Fine and short dendritic microstructure and columnar to equiaxed transition (CET) occurred by adding nano-Y2O3 particles. With the increasing amount of nano-Y2O3(1%,mass fraction),fully equiaxed crystallization appeared. These are caused by nano-Y2O3 particles acting as new nucleation site and rapid solidification of the melt. The results also show that inhomogeneous dispersion of nano-Y2O3 results in the formation of ε-Co phase in the coatings. The sub-microstructure of the clad is stacking fault. The mechanism of the formation of equiaxed grains is also analyzed.

  17. Advanced composite materials for optomechanical systems

    Science.gov (United States)

    Zweben, Carl

    2013-09-01

    Polymer matrix composites (PMCs) have been well established in optomechanical systems for several decades. The other three classes of composites; metal matrix composites (MMCs), ceramic matrix composites (CMCs), and carbon matrix composites (CAMCs) are making significant inroads. The latter include carbon/carbon (C/C) composites (CCCs). The success of composites has resulted in increasing use in consumer, industrial, scientific, and aerospace/defense optomechanical applications. Composites offer significant advantages over traditional materials, including high stiffnesses and strengths, near-zero and tailorable coefficients of thermal expansion (CTEs), tailorable thermal conductivities (from very low to over twice that of copper), and low densities. In addition, they lack beryllium's toxicity problems. Some manufacturing processes allow parts consolidation, reducing machining and joining operations. At present, PMCs are the most widely used composites. Optomechanical applications date from the 1970s. The second High Energy Astrophysical Observatory spacecraft, placed in orbit in 1978, had an ultrahigh-modulus carbon fiber-reinforced epoxy (carbon/epoxy) optical bench metering structure. Since then, fibers and matrix materials have advanced significantly, and use of carbon fiber-reinforced polymers (CFRPs) has increased steadily. Space system examples include the Hubble Space Telescope metering truss and instrument benches, Upper Atmosphere Research Satellite (UARS), James Webb Space Telescope and many others. Use has spread to airborne applications, such as SOFIA. Perhaps the most impressive CFRP applications are the fifty-four 12m and twelve 7m moveable ground-based ALMA antennas. The other three classes of composites have a number of significant advantages over PMCs, including no moisture absorption or outgassing of organic compounds. CCC and CMC components have flown on a variety of spacecraft. MMCs have been used in space, aircraft, military and industrial

  18. Magnetite/graphene oxide nano-composite for enhancement of hydrogen production from gelatinaceous wastewater.

    Science.gov (United States)

    Mostafa, Alsayed; El-Dissouky, Ali; Fawzy, Amal; Farghaly, Ahmed; Peu, Pascal; Dabert, Patrick; Le Roux, Sophie; Tawfik, Ahmed

    2016-09-01

    The effect of substrate to inoculum (So/Xo) ratio and supplementation of magnetite/graphene oxide (MGO) nano-composite material on hydrogen production from gelatinaceous wastewater via dark fermentation process was investigated. Results demonstrated that optimum So/Xo ratio of 1.0gCOD/gVSS achieved maximal hydrogen yield (HY) of 79.2±11.9mL H2/gCOD removed. Supplementation of anaerobes with 100mg/L MGO promoted HY up to 112.4±10.5mL H2/gCOD removed. Moreover, the degradation efficiency of carbohydrates, proteins and lipids was improved to 80.8±7.6, 34.4±2.3 and 31.4±2.2%, respectively. Acetate (HAc) and butyrate (HBu) concentrations increased from 102±6.8 to 125.3±6.3 and from 31.1±1.5 to 48.8±3.5mg/gVSS, respectively. However, propionate (HPr) concentration dropped from 35.9±2.7 to 15±1.3mg/gVSS. Hydrogenase enzyme activity increased 9-folds and the anaerobes elongated from ca. 1.8-2.9 to ca. 2.5-5.1μm with MGO addition. Moreover, Proteobacteria, Firmicutes, Clostridia and Bacilli were detected with the batches supplemented with MGO.

  19. 表面改性对LDPE/nano-ATH复合材料性能的影响%Effect of Surface Modification on Property of LDPE/Nano-ATH Composites

    Institute of Scientific and Technical Information of China (English)

    崔文广; 高岩磊; 时伟; 郧海丽

    2012-01-01

    采用熔融共混法制备了低密度聚乙烯(LDPE)/纳米氢氧化铝(nano-ATH)复合材料,研究了nano-ATH表面改性前后对复合材料力学性能和阻燃性能的影响;利用扫描电镜(SEM)分析了nano-ATH表面改性前后在LDPE基体中的分散性.结果表明:表面改性nano-ATH使复合材料具有较高的拉伸强度和断裂伸长率;nano-ATH用量较少时,其表面改性与否对复合材料的阻燃性能基本没有影响;加入量较大时,表面改性nano-ATH使复合材科具有较好的阻燃性能,其在LDPE基体中的分散性也得到改善.%LDPE/nano-ATH composite was prepared by means of melt blending method. The effect of the nano-ATH before and after modification on mechanical and flame retardant properties of the LDPE/nano-ATH composite was studied. The dispersion of the nano-ATH before and after modification in LDPE matrix was analyzed by SEM. The results show that: the tensile strength and elongation at break of the LDPE/nano-ATH composite with modified nano-ATH become better than those of the LDPE/nano-ATH composite with unmodified nano-ATH. The flame retardant property of the LDPE/nano-ATH composite with the modified or unmodified nano-ATH and the dispersion of the modified or unmodified nano-ATH in LDPE matrix exhibited slight difference at low loads; at high loads, the flame retardant property of the LDPE/nano-ATH composite with the modified nano-ATH becomes better than that of the LDPE/nano-ATH composite with the unmodified nano-ATH; the dispersion of the modified nano-ATH in LDPE matrix also becomes better than that of the unmodified nano-ATH in LDPE matrix.

  20. Correlation between nanostructural and electrical properties of barium titanate-based glass-ceramic nano-composites

    Energy Technology Data Exchange (ETDEWEB)

    Al-Assiri, M.S., E-mail: msassiri@kku.edu.sa [Department of Physics, King Khaled University, P.O. Box 9003, Abha (Saudi Arabia); El-Desoky, M.M., E-mail: mmdesoky@gmail.com [Department of Physics, King Khaled University, P.O. Box 9003, Abha (Saudi Arabia); Department of Physics, Faculty of Science, Suez Canal University, Suez (Egypt)

    2011-09-08

    Highlights: > Glasses have been transformed into nanomaterials by annealing at crystallization temperature. > Glass-ceramic nano-composites are important because of their new physical. > Grain sizes are the most significant structural parameter in electronic nanocrystalline phases. > These phases are very high electrical conductivity. > Hence, glass-ceramic nanocrystals are expected to be used, as gas sensors. - Abstract: Glasses in the system BaTiO{sub 3}-V{sub 2}O{sub 5}-Bi{sub 2}O{sub 3} have been transformed into glass-ceramic nano-composites by annealing at crystallization temperature T{sub cr} determined from DSC thermograms. After annealing they consist of small crystallites embedded in glassy matrix. The crystallization temperature T{sub cr} increases with increasing BaTiO{sub 3} content. XRD and TEM of the glass-ceramic nano-composites show that nanocrystals were embedded in the glassy matrix with an average grain size of 25 nm. The resulting materials exhibit much higher electrical conductivity than the initial glasses. It was postulated that the major role in the conductivity enhancement of these nanomaterials is played by the developed interfacial regions between crystalline and amorphous phases, in which the concentration of V{sup 4+}-V{sup 5+} pairs responsible for electron hopping, has higher than values that inside the glassy matrix. The experimental results were discussed in terms of a model proposed in this work and based on a 'core-shell' concept. From the best fits, reasonable values of various small polaron hopping (SPH) parameters were obtained. The conduction was attributed to non-adiabatic hopping of small polaron.

  1. Development of fine-celled bio-fiber composite foams using physical blowing agents and nano-particles

    Science.gov (United States)

    Guo, Gangjian

    As one of eco-friendly bio-fibers, wood-fiber has been incorporated in plastics to make wood-fiber/plastic composites (WPC) with an increased stiffness, durability and lowered cost. However, these improvements are usually accompanied by loss in the ductility and impact strength of the composites. These shortcomings can be significantly improved by incorporating a fine-cell foam structure in the composites. This thesis presents the development of the foaming technology for the manufacture of fine-cell WPC foams with environmentally benign physical blowing agents (PBAs), and focuses on the elucidation of the fundamental foaming mechanisms and the related issues involved. One critical issue comes from the volatiles evolved from the wood-fiber during high temperature processing. The volatiles, as a blowing agent, can contribute to the foaming process. However, they lead to gross deterioration of the cell structure of WPC foams. The presence of volatiles makes foaming of WPC "a poorly understood black art". With the use of PBAs, a strategy of lowering processing temperature becomes feasible, to suppress the generation of volatiles. A series of PBA-based experiments were designed using a statistical design of experiments (DOE) technique, and were performed to establish the relationship of processing and material variables with the structure of WPC foams. Fundamental foaming behaviors for two different PBAs and two different polymer systems were identified. WPC foams with a fine-cell morphology and a desired density were successfully obtained at the optimized conditions. Another limitation for the wider application of WPC is their flammability. Innovative use of a small amount of nano-clay in WPC significantly improved the flame-retarding property of WPC, and the key issue was to achieve a high degree of exfoliation of nano-particles in the polymer matrix, to achieve a desired flammability reduction. The synergistic effects of nano-particles in foaming of WPC were

  2. Sintering of Cu–Al2O3 nano-composite powders produced by a thermochemical route

    Directory of Open Access Journals (Sweden)

    MARIJA KORAC

    2007-11-01

    Full Text Available This paper presents the synthesis of nano-composite Cu–Al2O3 powder by a thermochemical method and sintering, with a comparative analysis of the mechanical and electrical properties of the obtained solid samples. Nano-crystalline Cu–Al2O3 powders were produced by a thermochemical method through the following stages: spray-drying, oxidation of the precursor powder, reduction by hydrogen and homogenization. Characterization of powders included analytical electron microscopy (AEM coupled with energy dispersive spectroscopy (EDS, differenttial thermal and thermogravimetric (DTA–TGA analysis and X-ray diffraction (XRD analysis. The size of the produced powders was 20–50 nm, with a noticeable presence of agglomerates. The composite powders were characterized by a homogenous distribution of Al2O3 in a copper matrix. The powders were cold pressed at a pressure of 500 MPa and sintered in a hydrogen atmosphere under isothermal conditions in the temperature range from 800 to 900 °C for up to 120 min. Characterization of the Cu–Al2O3 sintered system included determination of the density, relative volume change, electrical and mechanical properties, examination of the microstructure by SEM and focused ion beam (FIB analysis, as well as by EDS. The obtained nano-composite, the structure of which was, with certain changes, presserved in the final structure, provided a sintered material with a homogenеous distribution of dispersoid in a copper matrix, with exceptional effects of reinforcement and an excellent combination of mechanical and electrical properties.

  3. Effect of Application Rates of Assistant Agents on Properties of Nano SiO_2/NR Composites

    Institute of Scientific and Technical Information of China (English)

    ZHAO Tongjian; XU Yun; WANG Jiang; FU Xin

    2009-01-01

    Nano SiO_2/NR composites were prepared through blending nano SiO_2 emulsion with natural rubber latex and then concreting with acetic acid.The emulsion nano SiO_2 was prepared with Na_2SiO_3·9H_2O and hydrochloric acid under the reaction of the assistant agents.The was analyzed effect of the application rates of assistant agents such as silane coupling agent,surfactant,nucleating agent and dispersant on the properties and interface structure of the nano SiO_2/NR composites with IR,TEM,SEM,DMA was analyzed.An orthogonal test was arranged to select optimum condition.The results show that the best combination for preparing nano SiO_2/NR composites is as follows:the rate of the silane coupling agent(TESPT),the surfactant(dodecyl benzene sulfonate natrium),nucleating agent(AlCl_3)and dispersant(ethylene diamine tetraacetie acid)in the course of preparing nano SiO_2 are 15%,2.0%,2.5%and 0.4%,respectively.Several replications in the experiment had produced desirable nano SiO_2 products and nano SiO2/NR composites with better properties.

  4. SiO2@FeSO4 nano composite: A recoverable nano-catalyst for eco-friendly synthesis oximes of carbonyl compounds

    Directory of Open Access Journals (Sweden)

    Mostafa Karimkoshteh

    2016-01-01

    Full Text Available Various aldoximes and ketoximes synthesis of corresponding aldehydes and ketones in the presence of SiO2@FeSO4 nano composite as recoverable nano catalyst and NH2OH·HCl. The SiO2@FeSO4 nano composite system was carried out between 10 to 15 min in oil bath (70-80 °C under solvent-free condition in excellent yields in addition this protocol can be used for industrial scales. This method offers some advantages in term of clean reaction conditions, easy work-up procedure, short reaction time, applied to convert α-diketones to α-diketoximes (as longer than other carbonyl compounds, α,β-unsaturated aldehydes and ketones to corresponding oximes and suppression of any side product. So we think that NH2OH•HCl/SiO2@FeSO4 nano composite system could be considered a new and useful addition to the present methodologies in this area. Structure of products and nano composite elucidation was carried out by 1H NMR, 13C NMR, FT-IR, scanning electron microscopy (SEM.

  5. Preparation for CeO2/Nanographite Composite Materials and Electrochemical Degradation of Phenol by CeO2/Nanographite Cathodes.

    Science.gov (United States)

    Yu, Li; Yu, Xiujuan; Sun, Tianyi; Wang, Na

    2015-07-01

    CeO2/nanographite (CeO2/nano-G) composite materials were got by chemical precipitation method with nanographite (nano-G) and cerous nitrate hexahydrate as raw materials. The microstructures of CeO2/nano-G composite materials were characterized by means of SEM, XRD, XPS and Raman. The cathodes were made by nano-G and CeO2/nano-G composite materials, respectively. The electrolysis phenol was conducted by the diaphragm cell prepared cathode and the Ti/RuO2 anode. The results indicated that the Cerium oxide is mainly in nanoscale spherical state, uniformly dispersed in the nanographite sheet surface, and there are two different oxidation states for elemental Ce, namely, Ce(III) and Ce(IV). In the diaphragm electrolysis system with the aeration conditions, the degradation rate of phenol reached 93.9% under 120 min's electrolysis. Ceria in the cathode materials might lead to an increase in the local oxygen concentration, which accelerated the two-electron reduction of O2 to hydrogen peroxide (H2O2). The removal efficiency of phenol by using the CeO2/nano-G composite cathode was better than that of the nano-G cathode.

  6. Carbon fiber-reinforced cyanate ester/nano-ZrW2O8 composites with tailored thermal expansion.

    Science.gov (United States)

    Badrinarayanan, Prashanth; Rogalski, Mark K; Kessler, Michael R

    2012-02-01

    Fiber-reinforced composites are widely used in the design and fabrication of a variety of high performance aerospace components. The mismatch in coefficient of thermal expansion (CTE) between the high CTE polymer matrix and low CTE fiber reinforcements in such composite systems can lead to dimensional instability and deterioration of material lifetimes due to development of residual thermal stresses. The magnitude of thermally induced residual stresses in fiber-reinforced composite systems can be minimized by replacement of conventional polymer matrices with a low CTE, polymer nanocomposite matrix. Zirconium tungstate (ZrW(2)O(8)) is a unique ceramic material that exhibits isotropic negative thermal expansion and has excellent potential as a filler for development of low CTE polymer nanocomposites. In this paper, we report the fabrication and thermal characterization of novel, multiscale, macro-nano hybrid composite laminates comprising bisphenol E cyanate ester (BECy)/ZrW(2)O(8) nanocomposite matrices reinforced with unidirectional carbon fibers. The results reveal that incorporation of nanoparticles facilitates a reduction in CTE of the composite systems, which in turn results in a reduction in panel warpage and curvature after the cure because of mitigation of thermally induced residual stresses.

  7. Microwave Measurements of Ferrite Polymer Composite Materials

    Directory of Open Access Journals (Sweden)

    Rastislav Dosoudil

    2004-01-01

    Full Text Available The article focuses on the microwave measurements performed on the nickel-zinc sintered ferrite with the chemical formula Ni0.3Zn0.7Fe2O4 produced by the ceramic technique and composite materials based on this ferrite and a non-magnetic polymer (polyvinyl chloride matrix. The prepared composite samples had the same particle size distribution 0-250um but different ferrite particle concentrations between 23 vol% and 80 vol%. The apparatus for measurement of the signal proportional to the absolute value of scattering parameter S11 (reflexion coefficient is described and the dependence of measured reflected signal on a bias magnetic field has been studied. By means of experiments, the resonances to be connected with the geometry of microwave experimental set-up were distinguished from ferromagnetic resonance arising in ferrite particles of composite structure. The role of local interaction fields of ferrite particles in composite material has been discussed.