Selfish evolution of cytonuclear hybrid incompatibility in Mimulus.

Science.gov (United States)

Case, Andrea L; Finseth, Findley R; Barr, Camille M; Fishman, Lila

2016-09-14

Intraspecific coevolution between selfish elements and suppressors may promote interspecific hybrid incompatibility, but evidence of this process is rare. Here, we use genomic data to test alternative models for the evolution of cytonuclear hybrid male sterility in Mimulus In hybrids between Iron Mountain (IM) Mimulus guttatus × Mimulus nasutus, two tightly linked M. guttatus alleles (Rf1/Rf2) each restore male fertility by suppressing a local mitochondrial male-sterility gene (IM-CMS). Unlike neutral models for the evolution of hybrid incompatibility loci, selfish evolution predicts that the Rf alleles experienced strong selection in the presence of IM-CMS. Using whole-genome sequences, we compared patterns of population-genetic variation in Rf at IM to a neighbouring population that lacks IM-CMS. Consistent with local selection in the presence of IM-CMS, the Rf region shows elevated FST, high local linkage disequilibrium and a distinct haplotype structure at IM, but not at Cone Peak (CP), suggesting a recent sweep in the presence of IM-CMS. In both populations, Rf2 exhibited lower polymorphism than other regions, but the low-diversity outliers were different between CP and IM. Our results confirm theoretical predictions of ubiquitous cytonuclear conflict in plants and provide a population-genetic mechanism for the evolution of a common form of hybrid incompatibility. © 2016 The Author(s).

Differential algebraic method for arbitrary order curvilinear-axis combined geometric-chromatic aberration analysis

International Nuclear Information System (INIS)

Cheng Min; Tang Tiantong; Lu Yilong; Yao Zhenhua

2003-01-01

The principle of differential algebra is applied to analyse and calculate arbitrary order curvilinear-axis combined geometric-chromatic aberrations of electron optical systems. Expressions of differential algebraic form of high order combined aberrations are obtained and arbitrary order combined aberrations can be calculated numerically. As an example, a typical wide electron beam focusing system with curved optical axes named magnetic immersion lens has been studied. All the second-order and third-order combined geometric-chromatic aberrations of the lens have been calculated, and the patterns of the corresponding geometric aberrations and combined aberrations have been given as well

A working model of incompatible quantum variables

International Nuclear Information System (INIS)

Matthews, J.C.; Sheard, F.W.

1980-01-01

An electronic device designed to simulate some of the features of incompatible observables is described which, it is stated, can play a useful role in aiding the student to digest the mathematics of noncommuting operators and their eigenfunctions as they appear in an introductory course. (U.K.)

Chromosomal replication incompatibility in Dam methyltransferase deficient Escherichia coli cells

DEFF Research Database (Denmark)

Freiesleben, Ulrik Von

1996-01-01

Dam methyltransferase deficient Escherichia coli cells containing minichromosomes were constructed. Free plasmid DNA could not be detected in these cells and the minichromosomes were found to be integrated in multiple copies in the origin of replication (oriC) region of the host chromosome....... The absence of the initiation cascade in Dam- cells is proposed to account for this observation of apparent incompatibility between plasmid and chromosomal copies of oriC. Studies using oriC-pBR322 chimeric plasmids and their deletion derivatives indicated that the incompatibility determinant is an intact...

Johann Joseph on Geometrical-Optical Illusions: A Translation and Commentary.

Science.gov (United States)

Wade, Nicholas J; Todorović, Dejan; Phillips, David; Lingelbach, Bernd

2017-01-01

The term geometrical-optical illusions was coined by Johann Joseph Oppel (1815-1894) in 1855 in order to distinguish spatial distortions of size and orientation from the broader illusions of the senses. We present a translation of Oppel's article and a commentary on the material described in it. Oppel did much more than give a name to a class of visual spatial distortions. He examined a variety of figures and phenomena that were precursors of later, named illusions, and attempted to quantify and interpret them.

Extreme incompatibility of helium during mantle melting: Evidence from undegassed mid-ocean ridge basalts

Science.gov (United States)

Graham, David W.; Michael, Peter J.; Shea, Thomas

2016-11-01

We report total helium concentrations (vesicles + glass) for a suite of thirteen ultradepleted mid-ocean ridge basalts (UD-MORBs) that were previously studied for volatile contents (CO2, H2O) plus major and trace elements. The selected basalts are undersaturated in CO2 + H2O at their depths of eruption and represent rare cases of undegassed MORBs. Sample localities from the Atlantic (2), Indian (1) and Pacific (7) Oceans collectively show excellent linear correlations (r2 = 0.75- 0.92) between the concentrations of helium and the highly incompatible elements C, K, Rb, Ba, Nb, Th and U. Three basalts from Gakkel Ridge in the Arctic were also studied but show anomalous behavior marked by excess lithophile trace element abundances. In the Atlantic-Pacific-Indian suite, incompatible element concentrations vary by factors of 3-4.3, while helium concentration varies by a factor of 13. The strong correlations between the concentrations of helium and incompatible elements are explained by helium behavior as the most incompatible element during mantle melting. Partial melting of an ultradepleted mantle source, formed as a residue of earlier melt extraction, accounts for the observed concentrations. The earlier melting event involved removal of a small degree melt (∼1%) at low but non-zero porosity (0.01-0.5%), leading to a small amount of melt retention that strongly leveraged the incompatible element budget of the ultradepleted mantle source. Equilibrium melting models that produce the range of trace element and helium concentrations from this source require a bulk solid/melt distribution coefficient for helium that is lower than that for other incompatible elements by about a factor of ten. Alternatively, the bulk solid/melt distribution coefficient for helium could be similar to or even larger than that for other incompatible elements, but the much larger diffusivity of helium in peridotite leads to its more effective incompatibility and efficient extraction from a

Genetic evidence that two independent S-loci control RNase-based self-incompatibility in diploid strawberry.

Science.gov (United States)

Bosković, Radovan I; Sargent, Daniel J; Tobutt, Kenneth R

2010-03-01

The self-incompatibility mechanism that reduces inbreeding in many plants of the Rosaceae is attributed to a multi-allelic S locus which, in the Prunoideae and Maloideae subfamilies, comprises two complementary genes, a stylar-expressed S-RNase and a pollen-expressed SFB. To elucidate incompatibility in the subfamily Rosoideae, stylar-specific RNases and self-(in)compatibility status were analysed in various diploid strawberries, especially Fragaria nubicola and F. viridis, both self-incompatible, and F. vesca, self-compatible, and in various progenies derived from them. Unexpectedly, two unlinked RNase loci, S and T, were found, encoding peptides distinct from Prunoideae and Maloideae S-RNases; the presence of a single active allele at either is sufficient to confer self-incompatibility. By contrast, in diploid Maloideae and Prunoideae a single locus encodes S-RNases that share several conserved regions and two active alleles are required for self-incompatibility. Our evidence implicates the S locus in unilateral inter-specific incompatibility and shows that S and T RNases can, remarkably, confer not only allele-specific rejection of cognate pollen but also unspecific rejection of Sn Tn pollen, where n indicates a null allele, consistent with the the presence of the pollen component, SFB, activating the cognitive function of these RNases. Comparison of relevant linkage groups between Fragaria and Prunus suggests that Prunus S-RNases, unique in having two introns, may have resulted from gene conversion in an ancestor of Prunus. In addition, it is shown that there is a non-S locus that is essential for self-incompatibility in diploid Fragaria.

Islam and the Alleged Incompatibility with Popular Culture

OpenAIRE

Pierre Hecker

2017-01-01

This paper critically reflects upon the alleged incompatibility of Islam and popular culture, the antipathy toward the study of popular culture in the field of Islamic studies, and the question of what it is that puts "the popular" into culture.

The Incompatibility Triangle

Directory of Open Access Journals (Sweden)

Adrian Amarița

2016-01-01

Full Text Available Launch of the euro in the late 90s, can be interpreted as a first step towards the monetarysystem outlined by Mundell. Economists have noted the incompatibility of fixed exchange regime,perfect mobility of capital and the independence of monetary policy, the so-called triangle ofincompatibility, which was highlighted by Robert Mundell since 1968. Tommaso Padoa - Schioppacontinued his research on the harmonization and convergence required to economic policies in“Financial Europe". The author shows that the triangle is the freedom of movement of capital, theexchange rate stability and the autonomy of national monetary policies. The triangle ofincompatibility stems from the fact that they can be combined in their entirety, but only two. Theautonomy of monetary policy is the freedom of states to choose the appropriate monetary policyand take appropriate measures in case of recessions.

Software module for geometric product modeling and NC tool path generation

International Nuclear Information System (INIS)

Sidorenko, Sofija; Dukovski, Vladimir

2003-01-01

The intelligent CAD/CAM system named VIRTUAL MANUFACTURE is created. It is consisted of four intelligent software modules: the module for virtual NC machine creation, the module for geometric product modeling and automatic NC path generation, the module for virtual NC machining and the module for virtual product evaluation. In this paper the second intelligent software module is presented. This module enables feature-based product modeling carried out via automatic saving of the designed product geometric features as knowledge data. The knowledge data are afterwards applied for automatic NC program generation for the designed product NC machining. (Author)

ABO-incompatible kidney transplantation: first cases in Turkey.

Science.gov (United States)

Tuncer, M; Yücetin, L; Tekin, S; Demirbas, A

2012-01-01

ABO compatibility has been believed to be necessary in kidney transplantation (Ktx) to prevent acute antibody-mediated rejection. However, developments in immunosuppression and immunoadsorption techniques have overcome acute antibody-mediated rejection caused by ABO incompatibility. Herein, we have presented the first ABO-incompatible Ktx cases in Turkey. All recipients did not have an ABO-compatible donor but presented significant dialysis inadequacy due to vascular access problems. Five dialysis patients with blood groups O or B underwent kidney transplantation from living related donors of blood group type A1 or AB between march 23, 2007 and August 16, 2007. All patients received Rituximab (375 mg/m(2)) at 3-4 weeks before the Ktx. Additionally, we started tacrolimus (0.15 mg/kg), mycophenolate mofetil (2 × 1 g), and simvastatin (1 × 20 mg) 1 week before the operation. Immunoadsorption therapy employing a specific filter (Glycosorbs) to remove anti-A or anti-B antibodies was continued until the titers were 1/8 during the first postoperative week and >1/16 at the second postoperative week. We used 2 standard hemodialysis machines with a connection line to perform immunoabsorption and dialysis during the same session. Acute humoral and cellular rejection was not detected. During the follow-up 1 patient was lost due to a cardiovascular complication. Mean creatinine level was 1.1 ± 0.3 mg/dL. These first ABO-incompatible transplantation cases in Turkey suggest that this source may represent an effective approach to overcome the organ shortage. Copyright © 2012 Elsevier Inc. All rights reserved.

Evidence of natural selection acting on a polymorphic hybrid incompatibility locus in Mimulus.

Science.gov (United States)

Sweigart, Andrea L; Flagel, Lex E

2015-02-01

As a common cause of reproductive isolation in diverse taxa, hybrid incompatibilities are fundamentally important to speciation. A key question is which evolutionary forces drive the initial substitutions within species that lead to hybrid dysfunction. Previously, we discovered a simple genetic incompatibility that causes nearly complete male sterility and partial female sterility in hybrids between the two closely related yellow monkeyflower species Mimulus guttatus and M. nasutus. In this report, we fine map the two major incompatibility loci-hybrid male sterility 1 (hms1) and hybrid male sterility 2 (hms2)-to small nuclear genomic regions (each <70 kb) that include strong candidate genes. With this improved genetic resolution, we also investigate the evolutionary dynamics of hms1 in a natural population of M. guttatus known to be polymorphic at this locus. Using classical genetic crosses and population genomics, we show that a 320-kb region containing the hms1 incompatibility allele has risen to intermediate frequency in this population by strong natural selection. This finding provides direct evidence that natural selection within plant species can lead to hybrid dysfunction between species. Copyright © 2015 by the Genetics Society of America.

Clinico-serologic co-relation in bi-directional ABO incompatible hemopoietic stem cell transplantation

Directory of Open Access Journals (Sweden)

Sabita Basu

2015-01-01

Full Text Available Background: The ABO blood group system is of prime significance in red cell transfusion and organ transplantation. However, ABO compatibility is not critical in allogenic hemopoietic stem cell transplantation (HSCT and approximately 40-50% of hemopoietic stem cell transplants are ABO incompatible. This incompatibility may be major, minor or bi-directional. Though there are descriptions of transfusion practice and protocols in ABO incompatible HSCT, there are considerable variations and transfusion support in these patients can be very challenging. Aims: The immunohematologic observations in two cases of bi-directional ABO incompatible HSCT have been described, and clinico-serologic correlation has been attempted. Materials and Methods: In both cases, peripheral blood stem cell harvests were obtained using the Cobe spectra cell separator. Immunohematologic assessments in the donor and recipient were done as a part of pre HSCT evaluation. Both the standard tube technique and column agglutination method (Ortho Biovue Micro Bead System was used. Antibody screen was done by column agglutination method using three cell panel (Surgiscreen cells. Isoagglutinin titration was done by the master dilution method and standard validated techniques were used. Results: The pattern of laboratory findings in the two cases was different and so were the clinical outcomes. Although there was early engraftment in the first case, the second case developed pure red cell aplasia and this was well-reflected in the immunohematologic assessments. Conclusion: Immunohematologic assessment correlated well with the clinical picture and could be used to predict clinical outcome and onset of complications in ABO incompatible HSCT.

Plasma exchange in small intestinal transplantation between ABO-incompatible individuals: A case report

OpenAIRE

ZHANG, QIUHUI; HU, XINGBIN; XIA, AIJUN; YI, JING; AN, QUNXING; ZHANG, XIANQING

2013-01-01

The aim of this study was to investigate the application of plasma exchange in small intestinal transplantation between ABO blood type-incompatible patients. A small intestinal transplantation case between ABO-incompatible individuals is hereby presented and analyzed. The main treatment included plasma exchange, splenectomy and immunosuppression. The patient undergoing small intestinal transplantation exhibited stable vital signs. A mild acute rejection reaction developed ~2 weeks after the s...

Evidence of incompatibility for topical anionic agents used in conjunction with chlorhexidine gluconate: A systematic review

Directory of Open Access Journals (Sweden)

Gary Tran

2016-07-01

Full Text Available Chlorhexidine gluconate (CHG is a widely used antiseptic agent for skin and wound disinfection. The cationic properties of CHG may allow its inactivation and precipitation by anionic agents in commonly used topical agents. We conducted a systematic review by searching through PubMed, Cochrane Library, and Web of Science databases and selected original research articles reporting on CHG incompatibility, defined as inactivation or precipitation. The search yielded 22 publications that demonstrated CHG incompatibility via: 1 reduced antibacterial activity (carbomer, acrylates/C10-C30 alkyl acrylate crosspolymer, dentin, bovine serum albumin, copolymer M239144, sodium lauryl sulfate, heat-killed microbes, triethanolamine, and bark cork; and 2 visible precipitate formation (sodium hypochlorite, EDTA, saline, ethanol, andnystatin. Only three publications reported on CHG incompatibility in dermatology, specifically for carbomer, triethanolamine, and acrylates/C10-C30 alkyl acrylate crosspolymer. Although limited evidence linking CHG incompatibility and anionic agents exists, clinicians should carefully consider the nature of topical agents used if CHG is concurrently applied. Increased awareness of CHG incompatibility may result in better antibacterial activity thus ensuring optimal patient management.

AB0-incompatible living donor kidney transplantation: the long-term outcomes

Directory of Open Access Journals (Sweden)

Ya. G. Moysyuk

2017-01-01

Full Text Available Background: AB0-incompatible kidney transplantation is one of the ways to effectively expand the pool of living donors. In Russia, this technology has been used for more than 10 years, but until now there have been no reports on its long-term results. Aim: To evaluate the short- and long-term outcomes of the living-related AB0-incompatible kidney transplantations. Materials and methods: We analyzed the results of 49 consecutive AB0-incompatible kidney transplantations, performed from 2011 to 2017. Preoperative management of recipients included administration of rituximab and intravenous immunoglobulin, plasmapheresis and/or selective immunoadsorption, and combination of tacrolimus, mycophenolates and steroids. The target of anti-A/B antibody levels were is 1:8. All patients received standard immunosuppression after transplantation. Results: At baseline, median anti-A/B titer was 1:16 (1:2 to 1:1024 for IgM and 1:4 (0 to 1:512 for IgG. Median rituximab dose was 286 mg/m2 (range, from 94 to 396. To achieve target antibody levels, up to 10 plasmapheresis and/or immunoadsorption sessions (median, 2 were required. There were no deaths during the follow-up. Five grafts were lost, one of them due to hyperacute rejection. The incidence of biopsy-proven rejection was 6%. One-, three and six-year graft survival was 94%, 90% and 80%, respectively. Conclusion: Kidney transplantation across the AB0-incompatibility barrier is a  safe, successful and reasonable option to reduce the organ shortage. 

Adult Living Donor Liver Transplantation with ABO-Incompatible Grafts: A German Single Center Experience

Directory of Open Access Journals (Sweden)

Armin D. Goralczyk

2009-01-01

Full Text Available Adult living donor liver transplantations (ALDLTs across the ABO blood group barrier have been reported in Asia, North Americas, and Europe, but not yet in Germany. Several strategies have been established to overcome the detrimental effects that are attached with such a disparity between donor and host, but no gold standard has yet emerged. Here, we present the first experiences with three ABO-incompatible adult living donor liver transplantations in Germany applying different immunosuppressive strategies. Four patient-donor couples were considered for ABO-incompatible ALDLT. In these patients, resident ABO blood group antibodies (isoagglutinins were depleted by plasmapheresis or immunoadsorption and replenishment was inhibited by splenectomy and/or B-cell-targeted immunosuppression. Despite different treatments ALDLT could safely be performed in three patients and all patients had good initial graft function without signs for antibody-mediated rejection (AMR. Two patients had long-term graft survival with stable graft function. We thus propose the feasibility of ABO-incompatible ALDLT with these protocols and advocate further expansion of ABO incompatible ALDLT in multicenter trials to improve efficacy and safety.

Nudging to prevent the purchase of incompatible digital products online: An experimental study.

Directory of Open Access Journals (Sweden)

Gabriele Esposito

Full Text Available Ensuring safe and satisfactory online shopping activity, especially among vulnerable consumers such as elderly and less educated citizens, is part of a larger set of consumer policy objectives seeking to strengthen trust in the electronic marketplace. This article contributes to that goal by testing the effectiveness of nudges intended to prevent the purchase of 'incompatible' digital products (i.e., those which cannot be used with the devices owned by consumers or the systems they operate. We ran a computerised lab experiment (n = 626 examining three types of nudges, the effects of age and education, and interaction effects between these variables and the nudges. Results show that emotive warning messages and placing incompatibility information at the checkout page rather than earlier in the purchasing process were effective in reducing the purchase of incompatible goods. Age was also a relevant factor: older participants were more likely to purchase incompatible goods. In addition, there was an interaction effect between all nudges and age: two nudges exacerbated the effect of age, while another mitigated it. These results suggest nudges can be an effective policy tool, confirm a generational gap in online behaviour, and highlight how nudges can moderate the effect of socio-demographic variables.

Nudging to prevent the purchase of incompatible digital products online: An experimental study.

Science.gov (United States)

Esposito, Gabriele; Hernández, Penélope; van Bavel, René; Vila, José

2017-01-01

Ensuring safe and satisfactory online shopping activity, especially among vulnerable consumers such as elderly and less educated citizens, is part of a larger set of consumer policy objectives seeking to strengthen trust in the electronic marketplace. This article contributes to that goal by testing the effectiveness of nudges intended to prevent the purchase of 'incompatible' digital products (i.e., those which cannot be used with the devices owned by consumers or the systems they operate). We ran a computerised lab experiment (n = 626) examining three types of nudges, the effects of age and education, and interaction effects between these variables and the nudges. Results show that emotive warning messages and placing incompatibility information at the checkout page rather than earlier in the purchasing process were effective in reducing the purchase of incompatible goods. Age was also a relevant factor: older participants were more likely to purchase incompatible goods. In addition, there was an interaction effect between all nudges and age: two nudges exacerbated the effect of age, while another mitigated it. These results suggest nudges can be an effective policy tool, confirm a generational gap in online behaviour, and highlight how nudges can moderate the effect of socio-demographic variables.

Hybrid incompatibilities are affected by dominance and dosage in the haplodiploid wasp Nasonia

Science.gov (United States)

Beukeboom, Leo W.; Koevoets, Tosca; Morales, Hernán E.; Ferber, Steven; van de Zande, Louis

2015-01-01

Study of genome incompatibilities in species hybrids is important for understanding the genetic basis of reproductive isolation and speciation. According to Haldane's rule hybridization affects the heterogametic sex more than the homogametic sex. Several theories have been proposed that attribute asymmetry in hybridization effects to either phenotype (sex) or genotype (heterogamety). Here we investigate the genetic basis of hybrid genome incompatibility in the haplodiploid wasp Nasonia using the powerful features of haploid males and sex reversal. We separately investigate the effects of heterozygosity (ploidy level) and sex by generating sex reversed diploid hybrid males and comparing them to genotypically similar haploid hybrid males and diploid hybrid females. Hybrid effects of sterility were more pronounced than of inviability, and were particularly strong in haploid males, but weak to absent in diploid males and females, indicating a strong ploidy level but no sex specific effect. Molecular markers identified a number of genomic regions associated with hybrid inviability in haploid males that disappeared under diploidy in both hybrid males and females. Hybrid inviability was rescued by dominance effects at some genomic regions, but aggravated or alleviated by dosage effects at other regions, consistent with cytonuclear incompatibilities. Dosage effects underlying Bateson–Dobzhansky–Muller (BDM) incompatibilities need more consideration in explaining Haldane's rule in diploid systems. PMID:25926847

Nudging to prevent the purchase of incompatible digital products online: An experimental study

Science.gov (United States)

Esposito, Gabriele; Hernández, Penélope; van Bavel, René; Vila, José

2017-01-01

Ensuring safe and satisfactory online shopping activity, especially among vulnerable consumers such as elderly and less educated citizens, is part of a larger set of consumer policy objectives seeking to strengthen trust in the electronic marketplace. This article contributes to that goal by testing the effectiveness of nudges intended to prevent the purchase of 'incompatible' digital products (i.e., those which cannot be used with the devices owned by consumers or the systems they operate). We ran a computerised lab experiment (n = 626) examining three types of nudges, the effects of age and education, and interaction effects between these variables and the nudges. Results show that emotive warning messages and placing incompatibility information at the checkout page rather than earlier in the purchasing process were effective in reducing the purchase of incompatible goods. Age was also a relevant factor: older participants were more likely to purchase incompatible goods. In addition, there was an interaction effect between all nudges and age: two nudges exacerbated the effect of age, while another mitigated it. These results suggest nudges can be an effective policy tool, confirm a generational gap in online behaviour, and highlight how nudges can moderate the effect of socio-demographic variables. PMID:28282401

Quality Evaluation and Nonuniform Compression of Geometrically Distorted Images Using the Quadtree Distortion Map

Directory of Open Access Journals (Sweden)

Cristina Costa

2004-09-01

Full Text Available The paper presents an analysis of the effects of lossy compression algorithms applied to images affected by geometrical distortion. It will be shown that the encoding-decoding process results in a nonhomogeneous image degradation in the geometrically corrected image, due to the different amount of information associated to each pixel. A distortion measure named quadtree distortion map (QDM able to quantify this aspect is proposed. Furthermore, QDM is exploited to achieve adaptive compression of geometrically distorted pictures, in order to ensure a uniform quality on the final image. Tests are performed using JPEG and JPEG2000 coding standards in order to quantitatively and qualitatively assess the performance of the proposed method.

Partial incompatibility between ants and symbiotic fungi in two sympatric species of Acromyrmex leaf-cutting ants.

Science.gov (United States)

Bot, A N; Rehner, S A; Boomsma, J J

2001-10-01

We investigate the nature and duration of incompatibility between certain combinations of Acromyrmex leaf-cutting ants and symbiotic fungi, taken from sympatric colonies of the same or a related species. Ant-fungus incompatibility appeared to be largely independent of the ant species involved, but could be explained partly by genetic differences among the fungus cultivars. Following current theoretical considerations, we develop a hypothesis, originally proposed by S. A. Frank, that the observed incompatibilities are ultimately due to competitive interactions between genetically different fungal lineages, and we predict that the ants should have evolved mechanisms to prevent such competition between cultivars within a single garden. This requires that the ants are able to recognize unfamiliar fungi, and we show that this is indeed the case. Amplified fragment length polymorphism genotyping further shows that the two sympatric Acromyrmex species share each other's major lineages of cultivar, confirming that horizontal transfer does occasionally take place. We argue and provide some evidence that chemical substances produced by the fungus garden may mediate recognition of alien fungi by the ants. We show that incompatibility between ants and transplanted, genetically different cultivars is indeed due to active killing of the novel cultivar by the ants. This incompatibility disappears when ants are force-fed the novel cultivar for about a week, a result that is consistent with our hypothesis of recognition induced by the resident fungus and eventual replacement of incompatibility compounds during force-feeding.

40 CFR 265.177 - Special requirements for incompatible wastes.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Special requirements for incompatible wastes. 265.177 Section 265.177 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) INTERIM STATUS STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT...

40 CFR 265.230 - Special requirements for incompatible wastes.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Special requirements for incompatible wastes. 265.230 Section 265.230 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) INTERIM STATUS STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT...

40 CFR 265.406 - Special requirements for incompatible wastes.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Special requirements for incompatible wastes. 265.406 Section 265.406 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) INTERIM STATUS STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT...

Compatibility and incompatibility in hyphal anastomosis of arbuscular mycorrhizal fungi

Directory of Open Access Journals (Sweden)

Candido Barreto de Novais

Full Text Available ABSTRACT: Arbuscular mycorrhizal fungi (AMF, which live in symbiosis with 80 % of plants, are not able to grow when separated from their hosts. Spore germination is not host-regulated and germling growth is shortly arrested in the absence of host roots. Germling survival chances may be increased by hyphal fusions (anastomoses, which allow access to nutrients flowing in the extraradical mycelium (ERM. Perfect anastomoses, occurring with high frequency among germlings and the ERM of the same isolate, show protoplasm continuity and disappearance of hyphal walls. A low frequency of perfect fusions has been detected among co-specific genetically different isolates, although fungal nuclei have been consistently detected in all perfect fusions, suggesting active nuclear migration. When plants of different taxa establish symbioses with the same AMF species, anastomoses between ERM spreading from single root systems establish a common mycelium, which is an essential element to plant nutrition and communication. The interaction among mycelia produced by different isolates may also lead to pre-fusion incompatibility which hinders anastomosis formation, or to incompatibility after fusion, which separates the hyphal compartments. Results reported here, obtained by analyses of hyphal compatibility/incompatibility in AMF, suggest that anastomosis formation and establishment of protoplasm flow, fundamental to the maintenance of mycelial physiological and genetic continuity, may affect the fitness of these ecologically important biotrophic fungi.

Identifying incompatible combinations of concrete materials : volume I, final report.

Science.gov (United States)

2006-08-01

Unexpected interactions between otherwise acceptable ingredients in portland cement concrete are becoming increasingly common as cementitious systems become more and more complex and demands on the systems are more rigorous. Such incompatibilities ar...

Genetic incompatibility drives mate choice in a parasitic wasp

NARCIS (Netherlands)

Thiel, A.; Weeda, A.C.; Boer, de J.G.; Hoffmeister, T.S.

2013-01-01

Introduction: Allelic incompatibility between individuals of the same species should select for mate choice based on the genetic make-up of both partners at loci that influence offspring fitness. As a consequence, mate choice may be an important driver of allelic diversity. A complementary sex

A cross-sectional study to assess the incompatible dietary behavior of patients suffering from skin diseases: A pilot study

Directory of Open Access Journals (Sweden)

Meghana Kulkarni

2016-04-01

Conclusion: Scores for consumption of incompatible diet and dietary habits were found to be higher in acne and psoriasis patients compared to controls. Patients with fungal infections had higher scores for the presence of incompatible dietary habits but similar scores for the consumption of incompatible diet, whereas both scores in patients of vitiligo were similar to controls.

Cytoplasmic male sterility contributes to hybrid incompatibility between subspecies of Arabidopsis lyrata.

Science.gov (United States)

Aalto, Esa A; Koelewijn, Hans-Peter; Savolainen, Outi

2013-10-03

In crosses between evolutionarily diverged populations, genomic incompatibilities may result in sterile hybrids, indicating evolution of reproductive isolation. In several plant families, crosses within a population can also lead to male sterile progeny because of conflict between the maternally and biparentally inherited genomes. We examined hybrid fertility between subspecies of the perennial outcrossing self-incompatible Lyrate rockcress (Arabidopsis lyrata) in large reciprocal F2 progenies and three generations of backcrosses. In one of the reciprocal F2 progenies, almost one-fourth of the plants were male-sterile. Correspondingly, almost one-half of the plants in one of the four reciprocal backcross progenies expressed male sterility. In an additional four independent F2 and backcross families, three segregated male sterility. The observed asymmetrical hybrid incompatibility is attributable to male sterility factors in one cytoplasm, for which the other population lacks effective fertility restorers. Genotyping of 96 molecular markers and quantitative trait locus mapping revealed that only 60% of the plants having the male sterile cytoplasm and lacking the corresponding restorers were phenotypically male-sterile. Genotyping data showed that there is only one restorer locus, which mapped to a 600-kb interval at the top of chromosome 2 in a region containing a cluster of pentatricopeptide repeat genes. Male fertility showed no trade-off with seed production. We discuss the role of cytoplasm and genomic conflict in incipient speciation and conclude that cytoplasmic male sterility-lowering hybrid fitness is a transient effect with limited potential to form permanent reproductive barriers between diverged populations of hermaphrodite self-incompatible species.

Single gene control of postzygotic self-incompatibility in poke milkweed, Asclepias exaltata L.

Science.gov (United States)

Lipow, S R; Wyatt, R

2000-02-01

Most individuals of Asclepias exaltata are self-sterile, but all plants lack prezygotic barriers to self-fertilization. To determine whether postzygotic rejection of self-fertilized ovules is due to late-acting self-incompatibility or to extreme, early acting inbreeding depression, we performed three diallel crosses among self-sterile plants related as full-sibs. The full-sibs segregated into four compatibility classes, suggesting that late acting self-incompatibility is controlled by a single gene (S-locus). Crosses between plants sharing one or both alleles at the S-locus are incompatible. An additional diallel cross was done among full-sib progeny from a cross of a self-sterile and a self-fertile plant. These progeny grouped into two compatibility classes, and plants within classes displayed varying levels of self-fertility. This suggests that the occasional self-fertility documented in natural pollinations is caused by pseudo-self-fertility alleles that alter the functioning of the S-locus.

Single gene control of postzygotic self-incompatibility in poke milkweed, Asclepias exaltata L.

Science.gov (United States)

Lipow, S R; Wyatt, R

2000-01-01

Most individuals of Asclepias exaltata are self-sterile, but all plants lack prezygotic barriers to self-fertilization. To determine whether postzygotic rejection of self-fertilized ovules is due to late-acting self-incompatibility or to extreme, early acting inbreeding depression, we performed three diallel crosses among self-sterile plants related as full-sibs. The full-sibs segregated into four compatibility classes, suggesting that late acting self-incompatibility is controlled by a single gene (S-locus). Crosses between plants sharing one or both alleles at the S-locus are incompatible. An additional diallel cross was done among full-sib progeny from a cross of a self-sterile and a self-fertile plant. These progeny grouped into two compatibility classes, and plants within classes displayed varying levels of self-fertility. This suggests that the occasional self-fertility documented in natural pollinations is caused by pseudo-self-fertility alleles that alter the functioning of the S-locus. PMID:10655239

A geometrical model for DNA organization in bacteria.

Directory of Open Access Journals (Sweden)

Mathias Buenemann

Full Text Available Recent experimental studies have revealed that bacteria, such as C. crescentus, show a remarkable spatial ordering of their chromosome. A strong linear correlation has been found between the position of genes on the chromosomal map and their spatial position in the cellular volume. We show that this correlation can be explained by a purely geometrical model. Namely, self-avoidance of DNA, specific positioning of one or few DNA loci (such as origin or terminus together with the action of DNA compaction proteins (that organize the chromosome into topological domains are sufficient to get a linear arrangement of the chromosome along the cell axis. We develop a Monte-Carlo method that allows us to test our model numerically and to analyze the dependence of the spatial ordering on various physiologically relevant parameters. We show that the proposed geometrical ordering mechanism is robust and universal (i.e. does not depend on specific bacterial details. The geometrical mechanism should work in all bacteria that have compacted chromosomes with spatially fixed regions. We use our model to make specific and experimentally testable predictions about the spatial arrangement of the chromosome in mutants of C. crescentus and the growth-stage dependent ordering in E. coli.

Strain tensor selection and the elastic theory of incompatible thin sheets.

Science.gov (United States)

Oshri, Oz; Diamant, Haim

2017-05-01

The existing theory of incompatible elastic sheets uses the deviation of the surface metric from a reference metric to define the strain tensor [Efrati et al., J. Mech. Phys. Solids 57, 762 (2009)JMPSA80022-509610.1016/j.jmps.2008.12.004]. For a class of simple axisymmetric problems we examine an alternative formulation, defining the strain based on deviations of distances (rather than distances squared) from their rest values. While the two formulations converge in the limit of small slopes and in the limit of an incompressible sheet, for other cases they are found not to be equivalent. The alternative formulation offers several features which are absent in the existing theory. (a) In the case of planar deformations of flat incompatible sheets, it yields linear, exactly solvable, equations of equilibrium. (b) When reduced to uniaxial (one-dimensional) deformations, it coincides with the theory of extensible elastica; in particular, for a uniaxially bent sheet it yields an unstrained cylindrical configuration. (c) It gives a simple criterion determining whether an isometric immersion of an incompatible sheet is at mechanical equilibrium with respect to normal forces. For a reference metric of constant positive Gaussian curvature, a spherical cap is found to satisfy this criterion except in an arbitrarily narrow boundary layer.

Determinism, independence, and objectivity are incompatible.

Science.gov (United States)

Ionicioiu, Radu; Mann, Robert B; Terno, Daniel R

2015-02-13

Hidden-variable models aim to reproduce the results of quantum theory and to satisfy our classical intuition. Their refutation is usually based on deriving predictions that are different from those of quantum mechanics. Here instead we study the mutual compatibility of apparently reasonable classical assumptions. We analyze a version of the delayed-choice experiment which ostensibly combines determinism, independence of hidden variables on the conducted experiments, and wave-particle objectivity (the assertion that quantum systems are, at any moment, either particles or waves, but not both). These three ideas are incompatible with any theory, not only with quantum mechanics.

[Hemorrhagic syndrome after transfusion of incompatible blood].

Science.gov (United States)

Fedorova, Z D; Bsryshev, B A; Khanin, A Z; Chuslov, A G

1979-11-01

The patients were observed by a reanimation-hematological team of the Leningrad emergency service. It has been established that the hemorrhagic syndrome is the main one deterimining the unity of pathogenesis and clinical picture of the hemotransfusional complication. Phase character of the changes in the homeostasis system during the transfusion of incompatible blood was noted. The express diagnosis of the disorders and a scheme of the sequence of administration of hemostatic drugs are proposed. Mortality among such patients was reduced.

Measurement incompatibility and Schrödinger-Einstein-Podolsky-Rosen steering in a class of probabilistic theories

International Nuclear Information System (INIS)

Banik, Manik

2015-01-01

Steering is one of the most counter intuitive non-classical features of bipartite quantum system, first noticed by Schrödinger at the early days of quantum theory. On the other hand, measurement incompatibility is another non-classical feature of quantum theory, initially pointed out by Bohr. Recently, Quintino et al. [Phys. Rev. Lett. 113, 160402 (2014)] and Uola et al. [Phys. Rev. Lett. 113, 160403 (2014)] have investigated the relation between these two distinct non-classical features. They have shown that a set of measurements is not jointly measurable (i.e., incompatible) if and only if they can be used for demonstrating Schrödinger-Einstein-Podolsky-Rosen steering. The concept of steering has been generalized for more general abstract tensor product theories rather than just Hilbert space quantum mechanics. In this article, we discuss that the notion of measurement incompatibility can be extended for general probability theories. Further, we show that the connection between steering and measurement incompatibility holds in a border class of tensor product theories rather than just quantum theory

MIXING OF INCOMPATIBLE MATERIALS IN WASTE TANKS TECHNICAL BASIS DOCUMENT

International Nuclear Information System (INIS)

SANDGREN, K.R.

2006-01-01

This document presents onsite radiological, onsite toxicological, and offsite toxicological consequences, risk binning, and control decision results for the mixing of incompatible materials in waste tanks representative accident. Revision 4 updates the analysis to consider bulk chemical additions to single shell tanks (SSTs)

Geometrically Nonlinear Field Fracture Mechanics and Crack Nucleation, Application to Strain Localization Fields in Al-Cu-Li Aerospace Alloys

Directory of Open Access Journals (Sweden)

Satyapriya Gupta

2018-03-01

Full Text Available The displacement discontinuity arising between crack surfaces is assigned to smooth densities of crystal defects referred to as disconnections, through the incompatibility of the distortion tensor. In a dual way, the disconnections are defined as line defects terminating surfaces where the displacement encounters a discontinuity. A conservation statement for the crack opening displacement provides a framework for disconnection dynamics in the form of transport laws. A similar methodology applied to the discontinuity of the plastic displacement due to dislocations results in the concurrent involvement of dislocation densities in the analysis. Non-linearity of the geometrical setting is assumed for defining the elastic distortion incompatibility in the presence of both dislocations and disconnections, as well as for their transport. Crack nucleation in the presence of thermally-activated fluctuations of the atomic order is shown to derive from this nonlinearity in elastic brittle materials, without any algorithmic rule or ad hoc material parameter. Digital image correlation techniques applied to the analysis of tensile tests on ductile Al-Cu-Li samples further demonstrate the ability of the disconnection density concept to capture crack nucleation and relate strain localization bands to consistent disconnection fields and to the eventual occurrence of complex and combined crack modes in these alloys.

Development of Bilayer Tablets with Modified Release of Selected Incompatible Drugs.

Science.gov (United States)

Dhiman, Neha; Awasthi, Rajendra; Jindal, Shammy; Khatri, Smriti; Dua, Kamal

2016-01-01

The oral route is considered to be the most convenient and commonly-employed route for drug delivery. When two incompatible drugs need to be administered at the same time and in a single formulation, bilayer tablets are the most appropriate dosage form to administer such incompatible drugs in a single dose. The aim of the present investigation was to develop bilayered tablets of two incompatible drugs; telmisartan and simvastatin. The bilayer tablets were prepared containing telmisartan in a conventional release layer using croscarmellose sodium as a super disintegrant and simvastatin in a slow-release layer using HPMC K15M, Carbopol 934P and PVP K 30 as matrix forming polymers. The tablets were evaluated for various physical properties, drug-excipient interactions using FTIR spectroscopy and in vitro drug release using 0.1M HCl (pH 1.2) for the first hour and phosphate buffer (pH 6.8) for the remaining period of time. The release kinetics of simvastatin from the slow release layer were evaluated using the zero order, first order, Higuchi equation and Peppas equation. All the physical parameters (such as hardness, thickness, disintegration, friability and layer separation tests) were found to be satisfactory. The FTIR studies indicated the absence of interactions between the components within the individual layers, suggesting drug-excipient compatibility in all the formulations. No drug release from the slow-release layer was observed during the first hour of the dissolution study in 0.1M HCl. The release-controlling polymers had a significant effect on the release of simvastatin from the slow-release layer. Thus, the formulated bilayer tablets avoided incompatibility issues and proved the conventional release of telmisartan (85% in 45 min) and slow release of simvastatin (80% in 8 h). Stable and compatible bilayer tablets containing telmisartan and simvastatin were developed with better patient compliance as an alternative to existing conventional dosage forms.

Analysis of a plant complex resistance gene locus underlying immune-related hybrid incompatibility and its occurrence in nature.

Directory of Open Access Journals (Sweden)

Rubén Alcázar

2014-12-01

Full Text Available Mechanisms underlying speciation in plants include detrimental (incompatible genetic interactions between parental alleles that incur a fitness cost in hybrids. We reported on recessive hybrid incompatibility between an Arabidopsis thaliana strain from Poland, Landsberg erecta (Ler, and many Central Asian A. thaliana strains. The incompatible interaction is determined by a polymorphic cluster of Toll/interleukin-1 receptor-nucleotide binding-leucine rich repeat (TNL RPP1 (Recognition of Peronospora parasitica1-like genes in Ler and alleles of the receptor-like kinase Strubbelig Receptor Family 3 (SRF3 in Central Asian strains Kas-2 or Kond, causing temperature-dependent autoimmunity and loss of growth and reproductive fitness. Here, we genetically dissected the RPP1-like Ler locus to determine contributions of individual RPP1-like Ler (R1-R8 genes to the incompatibility. In a neutral background, expression of most RPP1-like Ler genes, except R3, has no effect on growth or pathogen resistance. Incompatibility involves increased R3 expression and engineered R3 overexpression in a neutral background induces dwarfism and sterility. However, no individual RPP1-like Ler gene is sufficient for incompatibility between Ler and Kas-2 or Kond, suggesting that co-action of at least two RPP1-like members underlies this epistatic interaction. We find that the RPP1-like Ler haplotype is frequent and occurs with other Ler RPP1-like alleles in a local population in Gorzów Wielkopolski (Poland. Only Gorzów individuals carrying the RPP1-like Ler haplotype are incompatible with Kas-2 and Kond, whereas other RPP1-like alleles in the population are compatible. Therefore, the RPP1-like Ler haplotype has been maintained in genetically different individuals at a single site, allowing exploration of forces shaping the evolution of RPP1-like genes at local and regional population scales.

The Transcriptome of Compatible and Incompatible Interactions of Potato (Solanum tuberosum) with Phytophthora infestans Revealed by DeepSAGE Analysis

DEFF Research Database (Denmark)

Gyetvai, Gabor; Sønderkær, Mads; Göbel, Ulrike

2012-01-01

of the compatible and incompatible interaction were captured by DeepSAGE analysis of 44 biological samples comprising five genotypes, differing only by the presence or absence of the R1 transgene, three infection time points and three biological replicates. 30.859 unique 21 base pair sequence tags were obtained......Late blight, caused by the oomycete Phytophthora infestans, is the most important disease of potato (Solanum tuberosum). Understanding the molecular basis of resistance and susceptibility to late blight is therefore highly relevant for developing resistant cultivars, either by marker...... interactions over the infection time course and between compatible and incompatible genotypes. Transcriptional changes were more numerous in compatible than in incompatible interactions. In contrast to incompatible interactions, transcriptional changes in the compatible interaction were observed predominantly...

Visualizing the Geometric Series.

Science.gov (United States)

Bennett, Albert B., Jr.

1989-01-01

Mathematical proofs often leave students unconvinced or without understanding of what has been proved, because they provide no visual-geometric representation. Presented are geometric models for the finite geometric series when r is a whole number, and the infinite geometric series when r is the reciprocal of a whole number. (MNS)

Geometric analysis

CERN Document Server

Bray, Hubert L; Mazzeo, Rafe; Sesum, Natasa

2015-01-01

This volume includes expanded versions of the lectures delivered in the Graduate Minicourse portion of the 2013 Park City Mathematics Institute session on Geometric Analysis. The papers give excellent high-level introductions, suitable for graduate students wishing to enter the field and experienced researchers alike, to a range of the most important areas of geometric analysis. These include: the general issue of geometric evolution, with more detailed lectures on Ricci flow and Kähler-Ricci flow, new progress on the analytic aspects of the Willmore equation as well as an introduction to the recent proof of the Willmore conjecture and new directions in min-max theory for geometric variational problems, the current state of the art regarding minimal surfaces in R^3, the role of critical metrics in Riemannian geometry, and the modern perspective on the study of eigenfunctions and eigenvalues for Laplace-Beltrami operators.

On bivariate geometric distribution

Directory of Open Access Journals (Sweden)

K. Jayakumar

2013-05-01

Full Text Available Characterizations of bivariate geometric distribution using univariate and bivariate geometric compounding are obtained. Autoregressive models with marginals as bivariate geometric distribution are developed. Various bivariate geometric distributions analogous to important bivariate exponential distributions like, Marshall-Olkin’s bivariate exponential, Downton’s bivariate exponential and Hawkes’ bivariate exponential are presented.

Effects of X-rays on seed setting and pollen tube growth in self-incompatible petunia

International Nuclear Information System (INIS)

Gilissen, L.J.W.

1978-01-01

The high sensitivity of seed setting and the relative insensitivity of pollen tube growth in the style to X-irradiation of pollen of Petunia hybrida L. indicated that pollen tube growth is independent of activities of the pollen genome. The S-specificity of the pollen grain in relation to incompatibility must, therefore, have built up during maturation of the pollen grain. X-irradiation of styles caused changes in some enzymes essential for basic metabolism, without affecting the pattern of compatible or incompatible pollen tube growth. Compatible and incompatible pollen tube growth in the style appeared to be independent of the metabolic state of the stylar cells and their simultaneous gene-activity. It is suggested that the S-specificity of the style, which is responsible for pollen tube growth regulation, is expressed at a very young stage of flower development. (Auth.)

Mutability of the self-incompatibility locus and identification of the S-bearing chromosome in Nicotiana alata

International Nuclear Information System (INIS)

Gastel, A.J.G. van.

1976-01-01

γ rays, X rays, fast neutrons and ethyl methanesulfonate (EMS) were used for inducing mutations at the self-incompatibility locus of Nicotiana alata. Chronic gamma irradiation and EMS treatment neither induced self-compatability mutations nor led to changes from one S allele to another. X rays and fast neutrons induced many self-compatibility mutations, but did not generate new self-incompatibility alleles. (Auth.)

An efficient formulation for linear and geometric non-linear membrane elements

Directory of Open Access Journals (Sweden)

Mohammad Rezaiee-Pajand

Full Text Available Utilizing the straingradient notation process and the free formulation, an efficient way of constructing membrane elements will be proposed. This strategy can be utilized for linear and geometric non-linear problems. In the suggested formulation, the optimization constraints of insensitivity to distortion, rotational invariance and not having parasitic shear error are employed. In addition, the equilibrium equations will be established based on some constraints among the strain states. The authors' technique can easily separate the rigid body motions, and those belong to deformational motions. In this article, a novel triangular element, named SST10, is formulated. This element will be used in several plane problems having irregular mesh and complicated geometry with linear and geometrically nonlinear behavior. The numerical outcomes clearly demonstrate the efficiency of the new formulation.

Incompatibility of strains and its application to mesoscopic studies of plasticity

Czech Academy of Sciences Publication Activity Database

Gröger, Roman; Lookman, T.; Saxena, A.

2010-01-01

Roč. 82, č. 14 (2010), Art. No. 144104 ISSN 1098-0121 Institutional research plan: CEZ:AV0Z20410507 Keywords : incompatibility * dislocation * mesoscopic Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.772, year: 2010

Marital incompatibility among couples living in rural Gonabad and underlying factors

Directory of Open Access Journals (Sweden)

Fateme Pirnahad

2017-06-01

Full Text Available Iranian families face many challenges these days. This study aimed to examine marital incompatibility and underlying factors among couples in rural Gonabad based on sociological views and socio-cultural characteristics of the villagers. The study collected data by using questionnaires. The statistical population included 380 married men and women living in the villages of Gonabad county. The samples were selected through cluster sampling method proportional to size. Preliminary interviews and a researcher-made questionnaire were used in order to collect the data. The validity and reliability of the questionnaire were confirmed through face validity and Cronbach's alpha coefficient, respectively. The mean age of the participants and their mean age at marriage were 39 and 21 years, respectively. An equal percentage of males and females participated in the present study. The results of multivariate regression analysis showed that three out of five hypotheses on the relationship between independent and dependent variables could not be rejected. These three hypotheses suggested a significant direct relationship between conflict of values and marital incompatibility, and a significant inverse relationship of fulfillment of needs and family social capital with marital incompatibility. The two variables of Role Strain and Homogamy were not significantly correlated with the independent variable. In view of the influence of changes in the modern era over the needs and expectations of people, it is necessary to provide rural couples with education appropriate to cultural context of their society.

Incidence of intravenous drug incompatibilities in intensive care units

Czech Academy of Sciences Publication Activity Database

Machotka, O.; Maňák, J.; Kuběna, Aleš Antonín; Vlček, J.

2015-01-01

Roč. 159, č. 4 (2015), s. 652-656 ISSN 1213-8118 Institutional support: RVO:67985556 Keywords : medical error * graph theory * graph coloring * drug administration * drug incompatibilities * applied combinatorics * decision theory * medical * medication safety * intensive care units Subject RIV: FN - Epidemiology, Contagious Diseases ; Clinical Immunology Impact factor: 0.924, year: 2015 http://library.utia.cas.cz/separaty/2014/E/kubena-0437509.pdf

Geometrical parton

Energy Technology Data Exchange (ETDEWEB)

Ebata, T [Tohoku Univ., Sendai (Japan). Coll. of General Education

1976-06-01

The geometrical distribution inferred from the inelastic cross section is assumed to be proportional to the partial waves. The precocious scaling and the Q/sup 2/-dependence of various quantities are treated from the geometrical point of view. It is shown that the approximate conservation of the orbital angular momentum may be a very practical rule to understand the helicity structure of various hadronic and electromagnetic reactions. The rule can be applied to inclusive reactions as well. The model is also applied to large angle processes. Through the discussion, it is suggested that many peculiar properties of the quark-parton can be ascribed to the geometrical effects.

Simple Y-autosomal incompatibilities cause hybrid male sterility in reciprocal crosses between Drosophila virilis and D. americana.

Science.gov (United States)

Sweigart, Andrea L

2010-03-01

Postzygotic reproductive isolation evolves when hybrid incompatibilities accumulate between diverging populations. Here, I examine the genetic basis of hybrid male sterility between two species of Drosophila, Drosophila virilis and D. americana. From these analyses, I reach several conclusions. First, neither species carries any autosomal dominant hybrid male sterility alleles: reciprocal F(1) hybrid males are perfectly fertile. Second, later generation (backcross and F(2)) hybrid male sterility between D. virilis and D. americana is not polygenic. In fact, I identified only three genetically independent incompatibilities that cause hybrid male sterility. Remarkably, each of these incompatibilities involves the Y chromosome. In one direction of the cross, the D. americana Y is incompatible with recessive D. virilis alleles at loci on chromosomes 2 and 5. In the other direction, the D. virilis Y chromosome causes hybrid male sterility in combination with recessive D. americana alleles at a single QTL on chromosome 5. Finally, in contrast with findings from other Drosophila species pairs, the X chromosome has only a modest effect on hybrid male sterility between D. virilis and D. americana.

Geometric measures of quantum correlations: characterization, quantification, and comparison by distances and operations

International Nuclear Information System (INIS)

Roga, W; Illuminati, F; Spehner, D

2016-01-01

We investigate and compare three distinguished geometric measures of bipartite quantum correlations that have been recently introduced in the literature: the geometric discord, the measurement-induced geometric discord, and the discord of response, each one defined according to three contractive distances on the set of quantum states, namely the trace, Bures, and Hellinger distances. We establish a set of exact algebraic relations and inequalities between the different measures. In particular, we show that the geometric discord and the discord of response based on the Hellinger distance are easy to compute analytically for all quantum states whenever the reference subsystem is a qubit. These two measures thus provide the first instance of discords that are simultaneously fully computable, reliable (since they satisfy all the basic Axioms that must be obeyed by a proper measure of quantum correlations), and operationally viable (in terms of state distinguishability). We apply the general mathematical structure to determine the closest classical-quantum state of a given state and the maximally quantum-correlated states at fixed global state purity according to the different distances, as well as a necessary condition for a channel to be quantumness breaking. (paper)

[Frequencies of blood groups, ABO and Rh D incompatibility in post-delivery women and their liveborn].

Science.gov (United States)

Baiochi, Eduardo; Camano, Luiz; Sass, Nelson; Colas, Osmar Ribeiro

2007-01-01

This study aimed to assess the frequency of different blood phenotypes and to predict the risk of Rh D alloimmunization and maternal-fetal incompatibility in a Brazilian population living in the West zone of the city of São Paulo-Brazil. This descriptive study evaluated 2,372 post-delivery women and their liveborn during one year. Blood types were analyzed by means of tube agglutination tests. The blood type frequencies were: 50.67 O, 32.17 A, 13.45 B, 3.75 AB, 90.34 Rh D(+) and 9.66 Rh D(-). ABO maternal-fetal incompatibility was detected in 18.4% and Rh D incompatibility in 7%. The fraction of Rh D(-) population at high risk for Rh D alloimmunization was 82%, emphasizing the importance of Rh D alloimmunization profilaxis.

Soluble CD30 and Cd27 levels in patients undergoing HLA antibody-incompatible renal transplantation.

Science.gov (United States)

Hamer, Rizwan; Roche, Laura; Smillie, David; Harmer, Andrea; Mitchell, Daniel; Molostvov, Guerman; Lam, For T; Kashi, Habib; Tan, Lam Chin; Imray, Chris; Fletcher, Simon; Briggs, David; Lowe, David; Zehnder, Daniel; Higgins, Rob

2010-08-01

HLA antibody-incompatible transplantation has a higher risk of rejection when compared to standard renal transplantation. Soluble CD30 (sCD30) has been shown in many, but not all, studies to be a biomarker for risk of rejection in standard renal transplant recipients. We sought to define the value of sCD30 and soluble CD27 (sCD27) in patients receiving HLA antibody-incompatible transplants. Serum taken at different time points from 32 HLA antibody-incompatible transplant recipients was retrospectively assessed for sCD30 and sCD27 levels by enzyme-linked immunosorbent assay (ELISA). This was compared to episodes of acute rejection, post-transplant donor-specific antibody (DSA) levels and 12 month serum creatinine levels. No association was found between sCD27 and sCD30 levels and risk of acute rejection or DSA levels. Higher sCD30 levels at 4-6 weeks post-transplantation were associated with a higher serum creatinine at 12 months. Conclusion patients undergoing HLA antibody-incompatible transplantation are at a high risk of rejection but neither sCD30 (unlike in standard transplantation) nor sCD27 was found to be a risk factor. High sCD30 levels measured at 4-6 weeks post-transplantation was associated with poorer graft function at one year. Copyright © 2010 Elsevier B.V. All rights reserved.

A maternal-effect genetic incompatibility in Caenorhabditis elegans

OpenAIRE

Burga, Alejandro; Ben-David, Eyal; Kruglyak, Leonid

2017-01-01

Selfish genetic elements spread in natural populations and have an important role in genome evolution. We discovered a selfish element causing a genetic incompatibility between strains of the nematode Caenorhabditis elegans . The element is made up of sup-35 , a maternal-effect toxin that kills developing embryos, and pha-1 , its zygotically expressed antidote. pha-1 has long been considered essential for pharynx development based on its mutant phenotype, but this phenotype in fact arises fro...

Immune Desensitization Allows Pediatric Blood Group Incompatible Kidney Transplantation.

Science.gov (United States)

Stojanovic, Jelena; Adamusiak, Anna; Kessaris, Nicos; Chandak, Pankaj; Ahmed, Zubir; Sebire, Neil J; Walsh, Grainne; Jones, Helen E; Marks, Stephen D; Mamode, Nizam

2017-06-01

Blood group incompatible transplantation (ABOi) in children is rare as pretransplant conditioning remains challenging and concerns persist about the potential increased risk of rejection. We describe the results of 11 ABOi pediatric renal transplant recipients in the 2 largest centers in the United Kingdom, sharing the same tailored desensitization protocol. Patients with pretransplant titers of 1 or more in 8 received rituximab 1 month before transplant; tacrolimus and mycophenolate mofetil were started 1 week before surgery. Antibody removal was performed to reduce titers to 1 or less in 8 on the day of the operation. No routine postoperative antibody removal was performed. Death-censored graft survival at last follow-up was 100% in the ABOi and 98% in 50 compatible pediatric transplants. One patient developed grade 2A rejection successfully treated with antithymocyte globulin. Another patient had a titer rise of 2 dilutions treated with 1 immunoadsorption session. There was no histological evidence of rejection in the other 9 patients. One patient developed cytomegalovirus and BK and 2 others EBV and BK viremia. Tailored desensitization in pediatric blood group incompatible kidney transplantation results in excellent outcomes with graft survival and rejection rates comparable with compatible transplants.

A conserved role for the ARC1 E3 ligase in Brassicaceae self-incompatibility

Directory of Open Access Journals (Sweden)

Daphne eGoring

2014-05-01

Full Text Available Ubiquitination plays essential roles in the regulation of many processes in plants including pollen rejection in self-incompatible species. In the Brassicaceae (mustard family, self-incompatibility drives the rejection of self-pollen by preventing pollen hydration following pollen contact with the stigmatic surface. Self-pollen is recognized by a ligand-receptor pair: the pollen S-locus Cysteine Rich/S-locus Protein 11 (SCR/SP11 ligand and the pistil S Receptor Kinase (SRK. Following self-pollen contact, the SCR/SP11 ligand on the pollen surface binds to SRK on the pistil surface, and the SRK-activated signaling pathway is initiated. This pathway includes the ARM Repeat Containing 1 (ARC1 protein, a member of the Plant U-box (PUB family of E3 ubiquitin ligases. ARC1 is a functional E3 ligase and is required downstream of SRK for the self-incompatibility response. This mini review highlights our recent progress in establishing ARC1’s conserved role in self-pollen rejection in Brassica and Arabidopsis species and discusses future research directions in this field.

Potential intravenous drug incompatibilities in a pediatric unit.

Science.gov (United States)

Leal, Karla Dalliane Batista; Leopoldino, Ramon Weyler Duarte; Martins, Rand Randall; Veríssimo, Lourena Mafra

2016-01-01

To investigate potential intravenous drug incompatibilities and related risk factors in a pediatric unit. A cross-sectional analytical study conducted in the pediatric unit of a university hospital in Brazil. Data on prescriptions given to children aged 0-15 years from June to October 2014 were collected. Prescriptions that did not include intravenous drugs and prescriptions with incomplete dosage regimen or written in poor handwriting were excluded. Associations between variables and the risk of potential incompatibility were investigated using the Student's t test and ANOVA; the level of significance was set at 5% (ppenicilina G e ceftriaxona. Quase 85% das crianças apresentaram ao menos uma potencial incompatibilidade, razão de 1,2 incompatibilidades/paciente. Os tipos de incompatibilidades mais comuns foram: não testada (93,4%), precipitação (5,5%), turbidez (0,7%) e decomposição química (0,4%). Os fatores associados a potenciais incompatibilidades foram: número de medicamentos e a prescrição dos medicamentos diazepam, fenitoína, fenobarbital e metronidazol. A maioria das prescrições pediátricas apresentou potenciais incompatibilidades e a incompatibilidade não testada foi o tipo mais comum. O número de medicamentos e a prescrição dos medicamentos diazepam, fenobarbital, fenitoína e metronidazol foram fatores de risco para potenciais incompatibilidades.

Geometric Design Laboratory

Data.gov (United States)

Federal Laboratory Consortium — Purpose: The mission of the Geometric Design Laboratory (GDL) is to support the Office of Safety Research and Development in research related to the geometric design...

Overcoming interspecific incompatibility in the cross Brassica campestris ssp. japonica x Brassica oleracea var. botrytis using irradiated mentor pollen page

International Nuclear Information System (INIS)

Sarla, N.

1988-01-01

The cross B. campestris ssp. japonica x B. oleracea var. botrytis fails due to incompatibility barrier at the stigma. To realize this cross, irradiated compatible pollen (mentor pollen) was used before the incompatible pollination. The presence of mentor pollen stimulated the incompatible pollen to germinate and effect fertilization and seed set. One hybrid was thus obtained. Most of the seeds were inviable. Of the 5 plants raised one was a hybrid and 4 resembled the female parent. 1 tab., 7 refs

Emission and null coordinates: geometrical properties and physical construction

International Nuclear Information System (INIS)

Coll, Bartolome; Ferrando, Joan J; Morales-Lladosa, Juan A

2011-01-01

A Relativistic Positioning System is defined by four clocks (emitters) broadcasting their proper time. Then, every event reached by the signals is naturally labeled by these four times which are the emission coordinates of this event. The coordinate hypersurfaces of the emission coordinates are the future light cones based on the emitter trajectories. For this reason the emission coordinates have been also named null coordinates or light coordinates. Nevertheless, other coordinate systems used in different relativistic contexts have the own right to be named null or light coordinates. Here we analyze when one can say that a coordinate is a null coordinate and when one can say that a coordinate system is null. Moreover, we examine the physical construction and the geometrical properties of several n ull coordinate systems : the emission and the reception coordinates, the radar coordinates, and the Bondi-Sachs coordinates, among others.

Security Assessment of Payment Systems under PCI DSS Incompatibilities

OpenAIRE

Bahtiyar , Şerif; Gür , Gürkan; Altay , Levent

2014-01-01

Part 9: Malicious Behavior and Fraud; International audience; With the ubiquitous proliferation of electronic payment systems, data and application security has become more critical for financial operations. The Payment Card Industry Data Security Standard (PCI DSS) has been developed by the payment industry to provide a widely-applicable and definitive security compliance among all components in electronic payment infrastructure. However, the security impact of PCI DSS incompatibilities and ...

Name agreement in picture naming : An ERP study

NARCIS (Netherlands)

Cheng, Xiaorong; Schafer, Graham; Akyürek, Elkan G.

Name agreement is the extent to which different people agree on a name for a particular picture. Previous studies have found that it takes longer to name low name agreement pictures than high name agreement pictures. To examine the effect of name agreement in the online process of picture naming, we

A family of names : rune-names and ogam-names and their relation to alphabet letter-names

NARCIS (Netherlands)

Griffiths, Alan

2013-01-01

The current consensus is that vernacular names assigned to the runes of the Germanic fuþark and to Irish ogam characters are indigenous creations independent of Mediterranean alphabet traditions. I propose, however, that ogam-names are based on interpretations of Hebrew, Greek or Latin letter-names

The effect of photometric and geometric context on photometric and geometric lightness effects.

Science.gov (United States)

Lee, Thomas Y; Brainard, David H

2014-01-24

We measured the lightness of probe tabs embedded at different orientations in various contextual images presented on a computer-controlled stereo display. Two background context planes met along a horizontal roof-like ridge. Each plane was a graphic rendering of a set of achromatic surfaces with the simulated illumination for each plane controlled independently. Photometric context was varied by changing the difference in simulated illumination intensity between the two background planes. Geometric context was varied by changing the angle between them. We parsed the data into separate photometric effects and geometric effects. For fixed geometry, varying photometric context led to linear changes in both the photometric and geometric effects. Varying geometric context did not produce a statistically reliable change in either the photometric or geometric effects.

The Study of Morphological Traits and Identification of Self-incompatibility Alleles in Almond Cultivars and Genotypes

Directory of Open Access Journals (Sweden)

Mousa Rasouli

2017-12-01

Full Text Available The evaluation of an almond collection using morphological variables and identification of self-incompatibility genotype  is useful for selecting pollinizers and for the design of crossing in almond breeding programs. In this study, important morphological traits and self-incompatibilities in 71 almond cultivars and genotypes were studied. Simple and multiplex specific PCR analyses were used in order to identify self-incompatibility alleles. Based on the results, cultivars and genotypes including ‘Dir Ras–e-Savojbolagh’, ‘D-124’, ‘D-99’, ‘Shahrood 12’, ‘Tuono’, ‘Nonpareil’, ‘Price’, ‘Mirpanj-e-Tehran’, ‘Pakotahe-e- Taleghan’, ‘V-13-34’, ‘V-16-8, ‘V-11-10’, ‘Zarghan 10’, ‘Uromiyeh 68’, ‘Barg dorosht-e-Hamedan’ and ‘Yazd 60’ were late flowering and had the highest quality of nut and kernel characters. The result of the PCR method using combined primers AS1II and AmyC5R showed amplification of ten self-incompatibility alleles (S1, S2, S3, S5, S6, S7, S8, S10, S12,and S unknown allele and three Sfalleles. Moreover, S1 had the highest frequencies in comparison with other known S-alleles. Also, unknown alleles with different sizes were detected and 58 new bands were found in some cultivars.

Three-point method for measuring the geometric error components of linear and rotary axes based on sequential multilateration

International Nuclear Information System (INIS)

Zhang, Zhenjiu; Hu, Hong

2013-01-01

The linear and rotary axes are fundamental parts of multi-axis machine tools. The geometric error components of the axes must be measured for motion error compensation to improve the accuracy of the machine tools. In this paper, a simple method named the three point method is proposed to measure the geometric error of the linear and rotary axes of the machine tools using a laser tracker. A sequential multilateration method, where uncertainty is verified through simulation, is applied to measure the 3D coordinates. Three noncollinear points fixed on the stage of each axis are selected. The coordinates of these points are simultaneously measured using a laser tracker to obtain their volumetric errors by comparing these coordinates with ideal values. Numerous equations can be established using the geometric error models of each axis. The geometric error components can be obtained by solving these equations. The validity of the proposed method is verified through a series of experiments. The results indicate that the proposed method can measure the geometric error of the axes to compensate for the errors in multi-axis machine tools.

The Riemannian geometry is not sufficient for the geometrization of the Maxwell's equations

Science.gov (United States)

Kulyabov, Dmitry S.; Korolkova, Anna V.; Velieva, Tatyana R.

2018-04-01

The transformation optics uses geometrized Maxwell's constitutive equations to solve the inverse problem of optics, namely to solve the problem of finding the parameters of the medium along the paths of propagation of the electromagnetic field. For the geometrization of Maxwell's constitutive equations, the quadratic Riemannian geometry is usually used. This is due to the use of the approaches of the general relativity. However, there arises the question of the insufficiency of the Riemannian structure for describing the constitutive tensor of the Maxwell's equations. The authors analyze the structure of the constitutive tensor and correlate it with the structure of the metric tensor of Riemannian geometry. It is concluded that the use of the quadratic metric for the geometrization of Maxwell's equations is insufficient, since the number of components of the metric tensor is less than the number of components of the constitutive tensor. A possible solution to this problem may be a transition to Finslerian geometry, in particular, the use of the Berwald-Moor metric to establish the structural correspondence between the field tensors of the electromagnetic field.

Geometric group theory

CERN Document Server

Druţu, Cornelia

2018-01-01

The key idea in geometric group theory is to study infinite groups by endowing them with a metric and treating them as geometric spaces. This applies to many groups naturally appearing in topology, geometry, and algebra, such as fundamental groups of manifolds, groups of matrices with integer coefficients, etc. The primary focus of this book is to cover the foundations of geometric group theory, including coarse topology, ultralimits and asymptotic cones, hyperbolic groups, isoperimetric inequalities, growth of groups, amenability, Kazhdan's Property (T) and the Haagerup property, as well as their characterizations in terms of group actions on median spaces and spaces with walls. The book contains proofs of several fundamental results of geometric group theory, such as Gromov's theorem on groups of polynomial growth, Tits's alternative, Stallings's theorem on ends of groups, Dunwoody's accessibility theorem, the Mostow Rigidity Theorem, and quasiisometric rigidity theorems of Tukia and Schwartz. This is the f...

Somatic Incompatibility in Diakaryotic-monokaryotic and Dikaryotic Pairings of Echinodontium tinctorium

Science.gov (United States)

A. Dan Wilson

1991-01-01

Somatic incompatibility in dikaryotic-monokaryotic (di-mon) and dikaryotic pairings of Echinodontium tinctorium was investigated in vitro on 4.5% malt agar. Antagonistic reactions of varying intensity occurred in all pairings between 12 allopatric dikaryons from Idaho and Arizona, between 14 sib-composed dikaryons from two Idaho sites, and in over...

On geometrized gravitation theories

International Nuclear Information System (INIS)

Logunov, A.A.; Folomeshkin, V.N.

1977-01-01

General properties of the geometrized gravitation theories have been considered. Geometrization of the theory is realized only to the extent that by necessity follows from an experiment (geometrization of the density of the matter Lagrangian only). Aor a general case the gravitation field equations and the equations of motion for matter are formulated in the different Riemann spaces. A covariant formulation of the energy-momentum conservation laws is given in an arbitrary geometrized theory. The noncovariant notion of ''pseudotensor'' is not required in formulating the conservation laws. It is shown that in the general case (i.e., when there is an explicit dependence of the matter Lagrangian density on the covariant derivatives) a symmetric energy-momentum tensor of the matter is explicitly dependent on the curvature tensor. There are enlisted different geometrized theories that describe a known set of the experimental facts. The properties of one of the versions of the quasilinear geometrized theory that describes the experimental facts are considered. In such a theory the fundamental static spherically symmetrical solution has a singularity only in the coordinate origin. The theory permits to create a satisfactory model of the homogeneous nonstationary Universe

SMT or TOFT? How the two main theories of carcinogenesis are made (artificially) incompatible.

Science.gov (United States)

Bedessem, Baptiste; Ruphy, Stéphanie

2015-09-01

The building of a global model of carcinogenesis is one of modern biology's greatest challenges. The traditional somatic mutation theory (SMT) is now supplemented by a new approach, called the Tissue Organization Field Theory (TOFT). According to TOFT, the original source of cancer is loss of tissue organization rather than genetic mutations. In this paper, we study the argumentative strategy used by the advocates of TOFT to impose their view. In particular, we criticize their claim of incompatibility used to justify the necessity to definitively reject SMT. First, we note that since it is difficult to build a non-ambiguous experimental demonstration of the superiority of TOFT, its partisans add epistemological and metaphysical arguments to the debate. This argumentative strategy allows them to defend the necessity of a paradigm shift, with TOFT superseding SMT. To do so, they introduce a notion of incompatibility, which they actually use as the Kuhnian notion of incommensurability. To justify this so-called incompatibility between the two theories of cancer, they move the debate to a metaphysical ground by assimilating the controversy to a fundamental opposition between reductionism and organicism. We show here that this argumentative strategy is specious, because it does not demonstrate clearly that TOFT is an organicist theory. Since it shares with SMT its vocabulary, its ontology and its methodology, it appears that a claim of incompatibility based on this metaphysical plan is not fully justified in the present state of the debate. We conclude that it is more cogent to argue that the two theories are compatible, both biologically and metaphysically. We propose to consider that TOFT and SMT describe two distinct and compatible causal pathways to carcinogenesis. This view is coherent with the existence of integrative approaches, and suggests that they have a higher epistemic value than the two theories taken separately.

Wolbachia symbiont infections induce strong cytoplasmic incompatibility in the tsetse fly Glossina morsitans.

Directory of Open Access Journals (Sweden)

Uzma Alam

2011-12-01

Full Text Available Tsetse flies are vectors of the protozoan parasite African trypanosomes, which cause sleeping sickness disease in humans and nagana in livestock. Although there are no effective vaccines and efficacious drugs against this parasite, vector reduction methods have been successful in curbing the disease, especially for nagana. Potential vector control methods that do not involve use of chemicals is a genetic modification approach where flies engineered to be parasite resistant are allowed to replace their susceptible natural counterparts, and Sterile Insect technique (SIT where males sterilized by chemical means are released to suppress female fecundity. The success of genetic modification approaches requires identification of strong drive systems to spread the desirable traits and the efficacy of SIT can be enhanced by identification of natural mating incompatibility. One such drive mechanism results from the cytoplasmic incompatibility (CI phenomenon induced by the symbiont Wolbachia. CI can also be used to induce natural mating incompatibility between release males and natural populations. Although Wolbachia infections have been reported in tsetse, it has been a challenge to understand their functional biology as attempts to cure tsetse of Wolbachia infections by antibiotic treatment damages the obligate mutualistic symbiont (Wigglesworthia, without which the flies are sterile. Here, we developed aposymbiotic (symbiont-free and fertile tsetse lines by dietary provisioning of tetracycline supplemented blood meals with yeast extract, which rescues Wigglesworthia-induced sterility. Our results reveal that Wolbachia infections confer strong CI during embryogenesis in Wolbachia-free (Gmm(Apo females when mated with Wolbachia-infected (Gmm(Wt males. These results are the first demonstration of the biological significance of Wolbachia infections in tsetse. Furthermore, when incorporated into a mathematical model, our results confirm that Wolbachia can

Comparison of nutritional parameters after abo incompatible living donor renal transplantation

Directory of Open Access Journals (Sweden)

Joon Seok Oh

2012-06-01

By the end of the first year, serum hemoglobin, calcium, albumin, HDL, bilirubin, AST, ALT were increased statistically. But serum phosphate, globulin were decreased statistically. In conclusion, successful ABO incompatible living donor kidney transplantation would restore a normal nutritional status even though the patients were performed plasmapheresis during the pre-transplant period.

The effect of ABO blood incompatibility on corneal transplant failure in conditions with low-risk of graft rejection.

Science.gov (United States)

Dunn, Steven P; Stark, Walter J; Stulting, R Doyle; Lass, Jonathan H; Sugar, Alan; Pavilack, Mark A; Smith, Patricia W; Tanner, Jean Paul; Dontchev, Mariya; Gal, Robin L; Beck, Roy W; Kollman, Craig; Mannis, Mark J; Holland, Edward J

2009-03-01

To determine whether corneal graft survival over a 5-year follow-up period was affected by ABO blood type compatibility in participants in the Cornea Donor Study undergoing corneal transplantation principally for Fuchs dystrophy or pseudophakic corneal edema, conditions at low-risk for graft rejection. Multi-center prospective, double-masked, clinical trial. ABO blood group compatibility was determined for 1,002 donors and recipients. During a 5-year follow-up period, episodes of graft rejection were documented, and graft failures were classified as to whether or not they were attributable to immunologic rejection. Endothelial cell density was determined by a central reading center for a subset of subjects. ABO donor-recipient incompatibility was not associated with graft failure attributable to any cause including graft failure because of rejection, or with the occurrence of a rejection episode. The 5-year cumulative incidence of graft failure attributable to rejection was 32 (6%) for recipients with ABO recipient-donor compatibility and 12 (4%) for those with ABO incompatibility (hazard ratio, 0.65; 95% confidence interval, 0.33 to 1.25; P = .20). The 5-year incidence for a definite rejection episode, irrespective of whether graft failure ultimately occurred, was 64 (12%) for ABO compatible compared with 25 (8%) for ABO incompatible cases (P = .09). Among clear grafts at 5 years, percent loss of endothelial cells was similar in ABO compatible and incompatible cases. In patients undergoing penetrating keratoplasty for Fuchs dystrophy or pseudophakic corneal edema, ABO matching is not indicated since ABO incompatibility does not increase the risk of transplant failure attributable to graft rejection.

Geometric metamorphosis.

Science.gov (United States)

Niethammer, Marc; Hart, Gabriel L; Pace, Danielle F; Vespa, Paul M; Irimia, Andrei; Van Horn, John D; Aylward, Stephen R

2011-01-01

Standard image registration methods do not account for changes in image appearance. Hence, metamorphosis approaches have been developed which jointly estimate a space deformation and a change in image appearance to construct a spatio-temporal trajectory smoothly transforming a source to a target image. For standard metamorphosis, geometric changes are not explicitly modeled. We propose a geometric metamorphosis formulation, which explains changes in image appearance by a global deformation, a deformation of a geometric model, and an image composition model. This work is motivated by the clinical challenge of predicting the long-term effects of traumatic brain injuries based on time-series images. This work is also applicable to the quantification of tumor progression (e.g., estimating its infiltrating and displacing components) and predicting chronic blood perfusion changes after stroke. We demonstrate the utility of the method using simulated data as well as scans from a clinical traumatic brain injury patient.

Dislocations via incompatibilities in phase-field models of microstructure evolution

Czech Academy of Sciences Publication Activity Database

Gröger, Roman; Marchand, B.; Lookman, T.

2016-01-01

Roč. 94, č. 5 (2016), 054105-1-054105-13 ISSN 2469-9950 R&D Projects: GA ČR(CZ) GA16-13797S; GA MŠk(CZ) LQ1601 Grant - others:Marie Curie Actions(CZ) 247705 MesoPhysDel Institutional support: RVO:68081723 Keywords : dislocation * incompatibility * phase field * Nye tensor * phase transition Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.836, year: 2016

Phase boundary in compatible and incompatible polymer blends studied by micro indentation test and microscopic observations

International Nuclear Information System (INIS)

Mina, M. F.; Akhtar, F.; Haque, M.E.

2003-10-01

The phase boundary of incompatible polymer blends such as poly (methyl methacrylate) (PMMA)/natural rubber (NR) and polyestyrene (PS)/NR as well as compatible blends such as PMMA/NR/epoxidizer NR (compatibilizer) and PS/NR/styrene-butadiene-styrene (SBS) block copolymer (compatibilizer) was studied by means of microhardness (H) technique and microscopy. Solution grown films of neat PMMA, PS and blended films of PMMA/NR, PS/NR, PMMA/NR/ENR and PS/NR/SBS were cast using a common solvent (toluene). While the neat PMMA and PS provide constant hardness values of 178 and 173 MPa, respectively, the binary (incompatible) and the ternary (compatible) blends show a conspicuous H-decrease (PMMA/NR=140 MPa, PS/NR=167 MPa, PMMA/NR/ENR=109 MPa and PS/NR/SBS=127 MPa). Scanning electron microscopy and optical microscopy reveal clear difference of the phase boundary of compatible (smooth boundary) and incompatible (sharp boundary) blends. Besides, the compatibilizer blends are characterised by the thinnest phase boundary (30 μm), which is found about 60 μm in the incompatible blends, showing a final hardness value that demonstrates the compatibilizer to be smoothly distributed in the interface between the two blend components. Results highlight that microindentation technique, in combination with microscopic observations, is a sensitive tool for studying the breadth and quality of the interphase boundary in non- or compatibilized polymer blends and other inhomogeneous materials. (author)

Comparative transcriptome analysis of stylar canal cells identifies novel candidate genes implicated in the self-incompatibility response of Citrus clementina

Directory of Open Access Journals (Sweden)

Caruso Marco

2012-02-01

Full Text Available Abstract Background Reproductive biology in citrus is still poorly understood. Although in recent years several efforts have been made to study pollen-pistil interaction and self-incompatibility, little information is available about the molecular mechanisms regulating these processes. Here we report the identification of candidate genes involved in pollen-pistil interaction and self-incompatibility in clementine (Citrus clementina Hort. ex Tan.. These genes have been identified comparing the transcriptomes of laser-microdissected stylar canal cells (SCC isolated from two genotypes differing for self-incompatibility response ('Comune', a self-incompatible cultivar and 'Monreal', a self- compatible mutation of 'Comune'. Results The transcriptome profiling of SCC indicated that the differential regulation of few specific, mostly uncharacterized transcripts is associated with the breakdown of self-incompatibility in 'Monreal'. Among them, a novel F-box gene showed a drastic up-regulation both in laser microdissected stylar canal cells and in self-pollinated whole styles with stigmas of 'Comune' in concomitance with the arrest of pollen tube growth. Moreover, we identify a non-characterized gene family as closely associated to the self-incompatibility genetic program activated in 'Comune'. Three different aspartic-acid rich (Asp-rich protein genes, located in tandem in the clementine genome, were over-represented in the transcriptome of 'Comune'. These genes are tightly linked to a DELLA gene, previously found to be up-regulated in the self-incompatible genotype during pollen-pistil interaction. Conclusion The highly specific transcriptome survey of the stylar canal cells identified novel genes which have not been previously associated with self-pollen rejection in citrus and in other plant species. Bioinformatic and transcriptional analyses suggested that the mutation leading to self-compatibility in 'Monreal' affected the expression of non

48 CFR 970.0371-6 - Incompatibility between regular duties and private interests.

Science.gov (United States)

2010-10-01

... Business Practices and Personal Conflicts of Interest 970.0371-6 Incompatibility between regular duties and... award of, a subcontract with a company in which the individual has an employment relationship or... with which the individual has an employment relationship, or significant financial interest, or which...

Algebras Generated by Geometric Scalar Forms and their Applications in Physics and Social Sciences

International Nuclear Information System (INIS)

Keller, Jaime

2008-01-01

The present paper analyzes the consequences of defining that the geometric scalar form is not necessarily quadratic, but in general K-atic, that is obtained from the K th power of the linear form, requiring {e i ;i = 1,...,N;(e i ) K = 1} and d-vector Σ i x i e i . We consider the algebras which are thus generated, for positive integer K, a generalization of the geometric algebras we know under the names of Clifford or Grassmann algebras. We then obtain a set of geometric K-algebras. We also consider the generalization of special functions of geometry which corresponds to the K-order scalar forms (as trigonometric functions and other related geometric functions which are based on the use of quadratic forms). We present an overview of the use of quadratic forms in physics as in our general theory, we have called START. And, in order to give an introduction to the use of the more general K-algebras and to the possible application to sciences other than physics, the application to social sciences is considered.For the applications to physics we show that quadratic spaces are a fundamental clue to understand the structure of theoretical physics (see, for example, Keller in ICNAAM 2005 and 2006).

A Two-Stage Approach to Civil Conflict: Contested Incompatibilities and Armed Violence

DEFF Research Database (Denmark)

Bartusevicius, Henrikas; Gleditsch, Kristian Skrede

2017-01-01

conflict origination but have no clear effect on militarization, whereas other features emphasized as shaping the risk of civil war, such as refugee flows and soft state power, strongly influence militarization but not incompatibilities. We posit that a two-stage approach to conflict analysis can help...

Geometric approximation algorithms

CERN Document Server

Har-Peled, Sariel

2011-01-01

Exact algorithms for dealing with geometric objects are complicated, hard to implement in practice, and slow. Over the last 20 years a theory of geometric approximation algorithms has emerged. These algorithms tend to be simple, fast, and more robust than their exact counterparts. This book is the first to cover geometric approximation algorithms in detail. In addition, more traditional computational geometry techniques that are widely used in developing such algorithms, like sampling, linear programming, etc., are also surveyed. Other topics covered include approximate nearest-neighbor search, shape approximation, coresets, dimension reduction, and embeddings. The topics covered are relatively independent and are supplemented by exercises. Close to 200 color figures are included in the text to illustrate proofs and ideas.

Geometric Mixing, Peristalsis, and the Geometric Phase of the Stomach.

Science.gov (United States)

Arrieta, Jorge; Cartwright, Julyan H E; Gouillart, Emmanuelle; Piro, Nicolas; Piro, Oreste; Tuval, Idan

2015-01-01

Mixing fluid in a container at low Reynolds number--in an inertialess environment--is not a trivial task. Reciprocating motions merely lead to cycles of mixing and unmixing, so continuous rotation, as used in many technological applications, would appear to be necessary. However, there is another solution: movement of the walls in a cyclical fashion to introduce a geometric phase. We show using journal-bearing flow as a model that such geometric mixing is a general tool for using deformable boundaries that return to the same position to mix fluid at low Reynolds number. We then simulate a biological example: we show that mixing in the stomach functions because of the "belly phase," peristaltic movement of the walls in a cyclical fashion introduces a geometric phase that avoids unmixing.

Geometric Mixing, Peristalsis, and the Geometric Phase of the Stomach.

Directory of Open Access Journals (Sweden)

Jorge Arrieta

Full Text Available Mixing fluid in a container at low Reynolds number--in an inertialess environment--is not a trivial task. Reciprocating motions merely lead to cycles of mixing and unmixing, so continuous rotation, as used in many technological applications, would appear to be necessary. However, there is another solution: movement of the walls in a cyclical fashion to introduce a geometric phase. We show using journal-bearing flow as a model that such geometric mixing is a general tool for using deformable boundaries that return to the same position to mix fluid at low Reynolds number. We then simulate a biological example: we show that mixing in the stomach functions because of the "belly phase," peristaltic movement of the walls in a cyclical fashion introduces a geometric phase that avoids unmixing.

Effect of geometric base roughness on size segregation

Directory of Open Access Journals (Sweden)

Jing L.

2017-01-01

Full Text Available The geometric roughness at boundaries has a profound impact on the dynamics of granular flows. For a bumpy base made of fixed particles, two major factors have been separately studied in the literature, namely, the size and spatial distribution of base particles. A recent work (Jing et al. 2016 has proposed a roughness indicator Ra, which combines both factors for any arbitrary bumpy base comprising equally-sized spheres. It is shown in mono-disperse flows that as Ra increases, a transition occurs from slip (Ra 0.62 conditions. This work focuses on such a phase transition in bi-disperse flows, in which Ra can be a function of time. As size segregation takes place, large particles migrate away from the bottom, leading to a variation of size ratio between flow- and base-particles. As a result, base roughness Ra evolves with the progress of segregation. Consistent with the slip/non-slip transition in mono-disperse flows, basal sliding arises at low values of Ra and the development of segregation might be affected; when Ra increases to a certain level (Ra > 0.62, non-slip condition is respected. This work extends the validity of Ra to bi-disperse flows, which can be used to understand the geometric boundary effect during segregation.

Hybrid incompatibilities are affected by dominance and dosage in the haplodiploid wasp Nasonia

NARCIS (Netherlands)

Beukeboom, Leo W; Koevoets, Tosca; Morales, Hernán E; Ferber, Steven; van de Zande, Louis

2015-01-01

Study of genome incompatibilities in species hybrids is important for understanding the genetic basis of reproductive isolation and speciation. According to Haldane's rule hybridization affects the heterogametic sex more than the homogametic sex. Several theories have been proposed that attribute

Quantum incompatibility of channels with general outcome operator algebras

Science.gov (United States)

Kuramochi, Yui

2018-04-01

A pair of quantum channels is said to be incompatible if they cannot be realized as marginals of a single channel. This paper addresses the general structure of the incompatibility of completely positive channels with a fixed quantum input space and with general outcome operator algebras. We define a compatibility relation for such channels by identifying the composite outcome space as the maximal (projective) C*-tensor product of outcome algebras. We show theorems that characterize this compatibility relation in terms of the concatenation and conjugation of channels, generalizing the recent result for channels with quantum outcome spaces. These results are applied to the positive operator valued measures (POVMs) by identifying each of them with the corresponding quantum-classical (QC) channel. We also give a characterization of the maximality of a POVM with respect to the post-processing preorder in terms of the conjugate channel of the QC channel. We consider another definition of compatibility of normal channels by identifying the composite outcome space with the normal tensor product of the outcome von Neumann algebras. We prove that for a given normal channel, the class of normally compatible channels is upper bounded by a special class of channels called tensor conjugate channels. We show the inequivalence of the C*- and normal compatibility relations for QC channels, which originates from the possibility and impossibility of copying operations for commutative von Neumann algebras in C*- and normal compatibility relations, respectively.

Geometric Constructions with the Computer.

Science.gov (United States)

Chuan, Jen-chung

The computer can be used as a tool to represent and communicate geometric knowledge. With the appropriate software, a geometric diagram can be manipulated through a series of animation that offers more than one particular snapshot as shown in a traditional mathematical text. Geometric constructions with the computer enable the learner to see and…

The effect of geometric scattering on the oscillatory magnetoconductance in multiply connected disordered mesoscopic rings

International Nuclear Information System (INIS)

Basu, C.; Gu Benyuan.

1994-12-01

We present the quantum mechanical calculations on the conductance of a quantum waveguide consisting of multiply connected mesoscopic rings with disordered ring-circumferences and ballistic lead connections between the rings with the transfer matrix approach. The profiles of the conductance as functions of the magnetic flux and the Fermi wave number of electrons depend on the number of rings as also on the geometric configuration of the system. The conductance spectrum of this system for disordered ring circumferences, disordered ring intervals and disordered magnetic flux is examined in detail. Studying the effect of geometric scattering and the two different length scales involved in the network, namely, the ring circumference and the ballistic lead connections on the conductance profile, we find that there exist two kinds of mini-bands, one originating from the bound states of the rings, i.e. the intrinsic mini-bands, and the other associated with the connecting leads between the adjacent rings, which are the extra mini-bands. These two kinds of mini-bands respond differently to external perturbations in parameters. Unlike the system of potential scatterers, this system of geometric scatterers show complete band formations at all energies even for finite systems and there is a preferential decay of the energy states depending upon the type of disorder introduced. The conductance band structures strongly depend on the geometric configuration of the network and so by controlling the geometric parameters, the conductance band structures can be artificially tailored. (author). 18 refs, 6 figs

Situating the Debate on "Geometrical Algebra" within the Framework of Premodern Algebra.

Science.gov (United States)

Sialaros, Michalis; Christianidis, Jean

2016-06-01

Argument The aim of this paper is to employ the newly contextualized historiographical category of "premodern algebra" in order to revisit the arguably most controversial topic of the last decades in the field of Greek mathematics, namely the debate on "geometrical algebra." Within this framework, we shift focus from the discrepancy among the views expressed in the debate to some of the historiographical assumptions and methodological approaches that the opposing sides shared. Moreover, by using a series of propositions related to Elem. II.5 as a case study, we discuss Euclid's geometrical proofs, the so-called "semi-algebraic" alternative demonstrations attributed to Heron of Alexandria, as well as the solutions given by Diophantus, al-Sulamī, and al-Khwārizmī to the corresponding numerical problem. This comparative analysis offers a new reading of Heron's practice, highlights the significance of contextualizing "premodern algebra," and indicates that the origins of algebraic reasoning should be sought in the problem-solving practice, rather than in the theorem-proving tradition.

Self-incompatibility in Petunia inflata: the relationship between a self-incompatibility locus F-box protein and its non-self S-RNases.

Science.gov (United States)

Sun, Penglin; Kao, Teh-hui

2013-02-01

The highly polymorphic S (for self-incompatibility) locus regulates self-incompatibility in Petunia inflata; the S-RNase regulates pistil specificity, and multiple S-locus F-box (SLF) genes regulate pollen specificity. The collaborative non-self recognition model predicts that, for any S-haplotype, an unknown number of SLFs collectively recognize all non-self S-RNases to mediate their ubiquitination and degradation. Using a gain-of-function assay, we examined the relationships between S2-SLF1 (for S2-allelic product of Type-1 SLF) and four S-RNases. The results suggest that S2-SLF1 interacts with S7- and S13-RNases, and the previously identified S1- and S3-RNases, but not with S5- or S11-RNase. An artificial microRNA expressed by the S2-SLF1 promoter, but not by the vegetative cell-specific promoter, Late Anther Tomato 52, suppressed expression of S2-SLF1 in S2 pollen, suggesting that SLF1 is specific to the generative cell. The S2 pollen with S2-SLF1 suppressed was compatible with S3-, S5-, S7-, S11-, and S13-carrying pistils, confirming that other SLF proteins are responsible for detoxifying S5- and S11-RNases and suggesting that S2-SLF1 is not the only SLF in S2 pollen that interacts with S3-, S7-, and S13-RNases. Petunia may have evolved at least two types of SLF proteins to detoxify any non-self S-RNase to minimize the deleterious effects of mutation in any SLF.

Distinct effects of pollinator dependence and self-incompatibility on pollen limitation in South African biodiversity hotspots.

Science.gov (United States)

Rodger, James G; Ellis, Allan G

2016-06-01

Global synthesis indicates that limitation of plant fecundity by pollen receipt (pollen limitation) is positively related to regional plant diversity and is higher for self-incompatible than self-compatible species. While self-incompatible species are always dependent on pollinating agents, self-compatible species may be pollinator-dependent or autofertile. This should cause variation in pollen limitation among self-compatible species, with lower pollen limitation in autofertile species because they do not depend on pollinators. We hypothesized that the intensity of pollen limitation in self-incompatible compared with pollinator-dependent self-compatible species should depend on whether pollen limitation is determined more by quantity than quality of pollen received. We compared pollen limitation between these three groups using a dataset of 70 biotically pollinated species from biodiverse regions of South Africa. Comparison with a global dataset indicated that pollen limitation in the South African biodiversity hotspots was generally comparable to other regions, despite expectations of higher pollen limitation based on the global plant diversity-pollen limitation relationship. Pollen limitation was lowest for autofertile species, as expected. It was also higher for pollinator-dependent self-compatible species than self-incompatible species, consistent with increased pollen-quality limitation in the former group due to negative consequences of pollinator-mediated self-pollination. However, there was a higher frequency of plants with zygomorphic flowers, which were also more pollen-limited, among pollinator-dependent self-compatible species. Thus, we could not attribute this difference in pollen limitation exclusively to a difference in pollen quality. Nevertheless, our results indicate that comparative studies should control for both pollinator dependence and self-incompatiblity when evaluating effects of other factors on pollen limitation. © 2016 The Author(s).

40 CFR 267.175 - What special requirements must I meet for incompatible wastes?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false What special requirements must I meet for incompatible wastes? 267.175 Section 267.175 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE...

40 CFR 267.203 - What special requirements must I meet for incompatible wastes?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false What special requirements must I meet for incompatible wastes? 267.203 Section 267.203 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE...

Incompatible type A plasma transfusion in patients requiring massive transfusion protocol: Outcomes of an Eastern Association for the Surgery of Trauma multicenter study.

Science.gov (United States)

Stevens, W Tait; Morse, Bryan C; Bernard, Andrew; Davenport, Daniel L; Sams, Valerie G; Goodman, Michael D; Dumire, Russell; Carrick, Matthew M; McCarthy, Patrick; Stubbs, James R; Pritts, Timothy A; Dente, Christopher J; Luo-Owen, Xian; Gregory, Jason A; Turay, David; Gomaa, Dina; Quispe, Juan C; Fitzgerald, Caitlin A; Haddad, Nadeem N; Choudhry, Asad; Quesada, Jose F; Zielinski, Martin D

2017-07-01

With a relative shortage of type AB plasma, many centers have converted to type A plasma for resuscitation of patients whose blood type is unknown. The goal of this study is to determine outcomes for trauma patients who received incompatible plasma transfusions as part of a massive transfusion protocol (MTP). As part of an Eastern Association for the Surgery of Trauma multi-institutional trial, registry and blood bank data were collected from eight trauma centers for trauma patients (age, ≥ 15 years) receiving emergency release plasma transfusions as part of MTPs from January 2012 to August 2016. Incompatible type A plasma was defined as transfusion to patient blood type B or type AB. Of the 1,536 patients identified, 92% received compatible plasma transfusions and 8% received incompatible type A plasma. Patient characteristics were similar except for greater penetrating injuries (48% vs 36%; p = 0.01) in the incompatible group. In the incompatible group, patients were transfused more plasma units at 4 hours (median, 9 vs. 5; p plasma to patients with blood groups B and AB as part of a MTP does not appear to be associated with significant increases in morbidity or mortality. Therapeutic study, level IV.

Desensitization protocol enabling pediatric crossmatch-positive renal transplantation: successful HLA-antibody-incompatible renal transplantation of two highly sensitized children.

Science.gov (United States)

Adamusiak, Anna M; Stojanovic, Jelena; Shaw, Olivia; Vaughan, Robert; Sebire, Neil J; Drage, Martin; Kessaris, Nicos; Marks, Stephen D; Mamode, Nizam

2017-02-01

Renal transplantation improves quality of life (QoL) and survival in children requiring renal replacement therapy (RRT). Sensitization with development of a broad-spectrum of anti-HLA antibodies as a result of previous transplantation or after receiving blood products is an increasing problem. There are no published reports of desensitization protocols in children allowing renal transplantation from HLA-antibody-incompatible living donors. We adopted our well-established adult desensitization protocol for this purpose and undertook HLA antibody-incompatible living donor renal transplants in two children: a 14-year-old girl and a 13-year-old boy. After 2 and 1.5 years of follow-up, respectively, both patients have stable renal allograft function despite a rise in donor-specific antibodies in one case. HLA-incompatible transplantation should be considered in selected cases for sensitized children.

Objective Work-Nonwork Conflict: From Incompatible Demands to Decreased Work Role Performance

Science.gov (United States)

Haun, Sascha; Steinmetz, Holger; Dormann, Christian

2011-01-01

Research on work-nonwork conflict (WNC) is based on the assumption that incompatible demands from the work and the nonwork domain hamper role performance. This assumption implies that role demands from both domains interact in predicting role performance, but research has been largely limited to main effects. In this multi-source study, we analyze…

Hybrid incompatibilities in the parasitic wasp genus Nasonia: negative effects of hemizygosity and the identification of transmission ratio distortion loci.

Science.gov (United States)

Koevoets, T; Niehuis, O; van de Zande, L; Beukeboom, L W

2012-03-01

The occurrence of hybrid incompatibilities forms an important stage during the evolution of reproductive isolation. In early stages of speciation, males and females often respond differently to hybridization. Haldane's rule states that the heterogametic sex suffers more from hybridization than the homogametic sex. Although haplodiploid reproduction (haploid males, diploid females) does not involve sex chromosomes, sex-specific incompatibilities are predicted to be prevalent in haplodiploid species. Here, we evaluate the effect of sex/ploidy level on hybrid incompatibilities and locate genomic regions that cause increased mortality rates in hybrid males of the haplodiploid wasps Nasonia vitripennis and Nasonia longicornis. Our data show that diploid F(1) hybrid females suffer less from hybridization than haploid F(2) hybrid males. The latter not only suffer from an increased mortality rate, but also from behavioural and spermatogenic sterility. Genetic mapping in recombinant F(2) male hybrids revealed that the observed hybrid mortality is most likely due to a disruption of cytonuclear interactions. As these sex-specific hybrid incompatibilities follow predictions based on Haldane's rule, our data accentuate the need to broaden the view of Haldane's rule to include species with haplodiploid sex determination, consistent with Haldane's original definition.

Transmuted Complementary Weibull Geometric Distribution

Directory of Open Access Journals (Sweden)

Ahmed Z. A…fify

2014-12-01

Full Text Available This paper provides a new generalization of the complementary Weibull geometric distribution that introduced by Tojeiro et al. (2014, using the quadratic rank transmutation map studied by Shaw and Buckley (2007. The new distribution is referred to as transmuted complementary Weibull geometric distribution (TCWGD. The TCWG distribution includes as special cases the complementary Weibull geometric distribution (CWGD, complementary exponential geometric distribution(CEGD,Weibull distribution (WD and exponential distribution (ED. Various structural properties of the new distribution including moments, quantiles, moment generating function and RØnyi entropy of the subject distribution are derived. We proposed the method of maximum likelihood for estimating the model parameters and obtain the observed information matrix. A real data set are used to compare the ‡exibility of the transmuted version versus the complementary Weibull geometric distribution.

Incompatible messages implied from positive and negative frames regarding trust and choice decisions

NARCIS (Netherlands)

Keren, G.

2007-01-01

Following common wisdom, if one trusts agent A more than B, then one should prefer to conduct transactions with the former rather than with the latter agent. Several experiments are presented that are incompatible with this conjecture. For example, when faced with a choice between two butchers,

Geometric phases in discrete dynamical systems

Energy Technology Data Exchange (ETDEWEB)

Cartwright, Julyan H.E., E-mail: julyan.cartwright@csic.es [Instituto Andaluz de Ciencias de la Tierra, CSIC–Universidad de Granada, E-18100 Armilla, Granada (Spain); Instituto Carlos I de Física Teórica y Computacional, Universidad de Granada, E-18071 Granada (Spain); Piro, Nicolas, E-mail: nicolas.piro@epfl.ch [École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne (Switzerland); Piro, Oreste, E-mail: piro@imedea.uib-csic.es [Departamento de Física, Universitat de les Illes Balears, E-07122 Palma de Mallorca (Spain); Tuval, Idan, E-mail: ituval@imedea.uib-csic.es [Mediterranean Institute for Advanced Studies, CSIC–Universitat de les Illes Balears, E-07190 Mallorca (Spain)

2016-10-14

In order to study the behaviour of discrete dynamical systems under adiabatic cyclic variations of their parameters, we consider discrete versions of adiabatically-rotated rotators. Parallelling the studies in continuous systems, we generalize the concept of geometric phase to discrete dynamics and investigate its presence in these rotators. For the rotated sine circle map, we demonstrate an analytical relationship between the geometric phase and the rotation number of the system. For the discrete version of the rotated rotator considered by Berry, the rotated standard map, we further explore this connection as well as the role of the geometric phase at the onset of chaos. Further into the chaotic regime, we show that the geometric phase is also related to the diffusive behaviour of the dynamical variables and the Lyapunov exponent. - Highlights: • We extend the concept of geometric phase to maps. • For the rotated sine circle map, we demonstrate an analytical relationship between the geometric phase and the rotation number. • For the rotated standard map, we explore the role of the geometric phase at the onset of chaos. • We show that the geometric phase is related to the diffusive behaviour of the dynamical variables and the Lyapunov exponent.

A name is a name is a name: some thoughts and personal opinions about molluscan scientific names

NARCIS (Netherlands)

Dance, S.P.

2009-01-01

Since 1758, with the publication of Systema Naturae by Linnaeus, thousands of scientific names have been proposed for molluscs. The derivation and uses of many of them are here examined from various viewpoints, beginning with names based on appearance, size, vertical distribution, and location.

Uncertain pollination environment promotes the evolution of a stable mixed reproductive system in the self-incompatible Hypochaeris salzmanniana (Asteraceae).

Science.gov (United States)

Arista, M; Berjano, R; Viruel, J; Ortiz, M Á; Talavera, M; Ortiz, P L

2017-09-01

The transition from outcrossing to selfing is a repeated pattern in angiosperm diversification and according to general theory this transition should occur quickly and mixed reproductive systems should be infrequent. However, a large proportion of flowering plants have mixed reproductive systems, even showing inbreeding depression. Recently, several theoretical studies have shown that mixed mating systems can be stable, but empirical studies supporting these assumptions are still scarce. Hypochaeris salzmanniana, an annual species with populations differing in their self-incompatibility expression, was used as a study case to assess the stability of its mixed reproductive system. Here a descriptive study of the pollination environment was combined with measurements of the stability of the self-incompatibility system, outcrossing rate, reproductive assurance and inbreeding depression in four populations for two consecutive years. The reproductive system of populations exhibited a geographical pattern: the proportion of plants decreased from west to east. Pollinator environment also varied geographically, being less favourable from west to east. The self-incompatibility expression of some populations changed markedly in only one year. After selfing, progeny was mainly self-compatible, while after outcrossing both self-incompatible and self-compatible plants were produced. In general, both reproductive assurance and high inbreeding depression were found in all populations and years. The lowest values of inbreeding depression were found in 2014 in the easternmost populations, which experienced a marked increase in self-compatibility in 2015. The mixed reproductive system of H. salzmanniana seems to be an evolutionarily stable strategy, with selfing conferring reproductive assurance when pollinator attendance is low, but strongly limited by inbreeding depression. The fact that the highest frequencies of self-compatible plants appeared in the environments most

An investigation of self-incompatibility within the genus Restrepia.

Science.gov (United States)

Millner, Helen J; McCrea, Alison R; Baldwin, Timothy C

2015-03-01

• The genus Restrepia (Orchidaceae) is indigenous to montane rain forests of Central and South America. Recently, as habitat has fragmented and wild populations dwindled, the chances for successful cross-pollination within the genus have been reduced. Since cultivated species of Restrepia have been vegetatively propagated, they remain genetically close to those in the wild, making ex situ collections of the genus useful model populations for investigating breeding systems. Restrepia are found in clade B of the Pleurothallidinae, the only clade in which self-incompatibility (SI) has not yet been confirmed. In the current study, private collections of Restrepia were used to study the operation of SI within the genus to assist future ex situ conservation of this and related genera.• A variety of self-pollination, intraspecific, and interspecific crosses were performed across the genus, and pollen tube growth was studied.• Individual species exhibited varying degrees of SI. Self-pollinations performed across 26 species in the genus produced few viable seeds, with the exception of R. aberrans. Viable "filled" seeds with embryos were shown to require an intraspecific cross. Primary hybrids between species produced >90% seeds with embryos that germinated well.• The type of SI operating within the genus was considered to be best explained by gametophytic self-incompatibility (GSI) with interspecific variation in its phenotypic expression. The implications of these findings are discussed in relation to SI in the Pleurothallidinae and conservation strategies for Restrepia and related genera. © 2015 Botanical Society of America, Inc.

The Pace of Hybrid Incompatibility Evolution in House Mice.

Science.gov (United States)

Wang, Richard J; White, Michael A; Payseur, Bret A

2015-09-01

Hybrids between species are often sterile or inviable. This form of reproductive isolation is thought to evolve via the accumulation of mutations that interact to reduce fitness when combined in hybrids. Mathematical formulations of this "Dobzhansky-Muller model" predict an accelerating buildup of hybrid incompatibilities with divergence time (the "snowball effect"). Although the Dobzhansky-Muller model is widely accepted, the snowball effect has only been tested in two species groups. We evaluated evidence for the snowball effect in the evolution of hybrid male sterility among subspecies of house mice, a recently diverged group that shows partial reproductive isolation. We compared the history of subspecies divergence with patterns of quantitative trait loci (QTL) detected in F2 intercrosses between two pairs of subspecies (Mus musculus domesticus with M. m. musculus and M. m. domesticus with M. m. castaneus). We used a recently developed phylogenetic comparative method to statistically measure the fit of these data to the snowball prediction. To apply this method, QTL were partitioned as either shared or unshared in the two crosses. A heuristic partitioning based on the overlap of QTL confidence intervals produced unambiguous support for the snowball effect. An alternative approach combining data among crosses favored the snowball effect for the autosomes, but a linear accumulation of incompatibilities for the X chromosome. Reasoning that the X chromosome analyses are complicated by low mapping resolution, we conclude that hybrid male sterility loci have snowballed in house mice. Our study illustrates the power of comparative genetic mapping for understanding mechanisms of speciation. Copyright © 2015 by the Genetics Society of America.

Prdm9 incompatibility controls oligospermia and delayed fertility but no selfish transmission in mouse intersubspecific hybrids.

Science.gov (United States)

Flachs, Petr; Bhattacharyya, Tanmoy; Mihola, Ondřej; Piálek, Jaroslav; Forejt, Jiří; Trachtulec, Zdenek

2014-01-01

PR-domain 9 (Prdm9) is the first hybrid sterility gene identified in mammals. The incompatibility between Prdm9 from Mus musculus domesticus (Mmd; the B6 strain) and the Hstx2 region of chromosome (Chr) X from M. m. musculus (Mmm; the PWD strain) participates in the complete meiotic arrest of mouse intersubspecific (PWD×B6)F1 hybrid males. Other studies suggest that also semisterile intersubspecific hybrids are relevant for mouse speciation, but the genes responsible remain unknown. To investigate the causes of this semisterility, we analyzed the role of Prdm9 and Chr X in hybrids resulting from the crosses of PWK, another Mmm-derived inbred strain. We demonstrate that Prdm9 and Chr X control the partial meiotic arrest and reduced sperm count in (PWK×B6)F1 males. Asynapsis of heterosubspecific chromosomes and semisterility were partially suppressed by removal of the B6 allele of Prdm9. Polymorphisms between PWK and PWD on Chr X but not in the Prdm9 region were responsible for the modification of the outcome of Prdm9-Chr X F1 hybrid incompatibility. Furthermore, (PWK×B6)F1 hybrid males displayed delayed fertility dependent on the Prdm9 incompatibility. While the Drosophila hybrid sterility gene Overdrive causes both delayed fertility and increased transmission of its own chromosome to the offspring, the segregation of Chr X and the Prdm9 region from the mouse (PWK×B6)F1 males was normal. Our results indicate extended functional consequences of Prdm9-Chr X intersubspecific incompatibility on the fertility of hybrids and should influence the design of fertility analyses in hybrid zones and of laboratory crosses between Mmm and Mmd strains.

Prdm9 incompatibility controls oligospermia and delayed fertility but no selfish transmission in mouse intersubspecific hybrids.

Directory of Open Access Journals (Sweden)

Petr Flachs

Full Text Available PR-domain 9 (Prdm9 is the first hybrid sterility gene identified in mammals. The incompatibility between Prdm9 from Mus musculus domesticus (Mmd; the B6 strain and the Hstx2 region of chromosome (Chr X from M. m. musculus (Mmm; the PWD strain participates in the complete meiotic arrest of mouse intersubspecific (PWD×B6F1 hybrid males. Other studies suggest that also semisterile intersubspecific hybrids are relevant for mouse speciation, but the genes responsible remain unknown. To investigate the causes of this semisterility, we analyzed the role of Prdm9 and Chr X in hybrids resulting from the crosses of PWK, another Mmm-derived inbred strain. We demonstrate that Prdm9 and Chr X control the partial meiotic arrest and reduced sperm count in (PWK×B6F1 males. Asynapsis of heterosubspecific chromosomes and semisterility were partially suppressed by removal of the B6 allele of Prdm9. Polymorphisms between PWK and PWD on Chr X but not in the Prdm9 region were responsible for the modification of the outcome of Prdm9-Chr X F1 hybrid incompatibility. Furthermore, (PWK×B6F1 hybrid males displayed delayed fertility dependent on the Prdm9 incompatibility. While the Drosophila hybrid sterility gene Overdrive causes both delayed fertility and increased transmission of its own chromosome to the offspring, the segregation of Chr X and the Prdm9 region from the mouse (PWK×B6F1 males was normal. Our results indicate extended functional consequences of Prdm9-Chr X intersubspecific incompatibility on the fertility of hybrids and should influence the design of fertility analyses in hybrid zones and of laboratory crosses between Mmm and Mmd strains.

The frequency of ABO blood group maternal-fetal incompatibility, maternal iso-agglutinins, and immune agglutinins quantitation in Osogbo, Osun State, South-West of Nigeria

Directory of Open Access Journals (Sweden)

Oseni Bashiru

2011-01-01

Full Text Available Background : ABO incompatibility in maternal-fetal relationship has been shown to cause hemolytic disease of the newborn (HDNB; a survey which is not yet done in this locality. Aim: Frequency of ABO blood group maternal-fetal incompatibility, maternal iso-agglutinins, and immune agglutinins quantitation was carried out in Osogbo, Osun State, South-West of Nigeria. Settings and Designs : A total of 260 subjects comprising 130 postpartum mothers within the age range of 22-35 years having good obstetrics history and normal delivery, with their 130 neonate babies were used for the study. Materials and Methods : ABO cell and serum groupings were carried out on the subjects using standard antisera and cells with appropriate controls. Direct Coomb′s Test was carried out on neonate red cells. Antibody quantitation by double dilution on the maternal serum using red cells containing corresponding antigen to the antibody was determined. A titer, which is the reciprocal of the highest dilution showing agglutination by Indirect Coombs Test, was determined. Another batch of sera was pretreated with 2-mecarptoethanol before determining the titer. Statistical Analysis: The distribution study results obtained were compared in percentages, whereas the antibodies quantitation was expressed as titers using the mode of the titers for compariso-agglutininsn. Results and Conclusions : Thirty-eight percent (50 mothers were ABO incompatible with their babies, whereas 62% (80 mothers were compatible. The distribution of blood groups in the compatible population showed blood group O (45%; A (30%; B (20%; and AB (5%. Mothers O, A, and B carrying incompatible babies had a frequency of 24% each, whereas mothers AB had 28%. Serologist differences occur in maternal ABO antibodies of corresponding incompatible baby ABO antigens. A high incidence of ABO maternal-fetal incompatibility observed without detection of immune agglutinins is indicative of a rare incidence of HDNB due

Comparative genetics of hybrid incompatibility: sterility in two Solanum species crosses.

Science.gov (United States)

Moyle, Leonie C; Nakazato, Takuya

2008-07-01

The genetic basis of hybrid sterility can provide insight into the genetic and evolutionary origins of species barriers. We examine the genetics of hybrid incompatibility between two diploid plant species in the plant clade Solanum sect. Lycopersicon. Using a set of near-isogenic lines (NILs) representing the wild species Solanum pennellii (formerly Lycopersicon pennellii) in the genetic background of the cultivated tomato S. lycopersicum (formerly L. esculentum), we found that hybrid pollen and seed infertility are each based on a modest number of loci, male (pollen) and other (seed) incompatibility factors are roughly comparable in number, and seed-infertility QTL act additively or recessively. These findings are remarkably consistent with our previous analysis in a different species pair, S. lycopersicum x S. habrochaites. Data from both studies contrast strongly with data from Drosophila. Finally, QTL for pollen and seed sterility from the two Solanum studies were chromosomally colocalized, indicating a shared evolutionary history for these QTL, a nonrandom genomic distribution of loci causing sterility, and/or a proclivity of certain genes to be involved in hybrid sterility. We show that comparative mapping data can delimit the probable timing of evolution of detected QTL and discern which sterility loci likely evolved earliest among species.

Aplasia pura de serie roja post-trasplante alogeneico de células progenitoras hematopoyeticas ABO incompatible Pure red cell aplasia after ABO incompatible bone marrow transplantation

Directory of Open Access Journals (Sweden)

E. Bulliorsky

2002-12-01

Full Text Available El trasplante alogeneico de células progenitoras hematopoyéticas (TCPH con incompatibilidad ABO entre el donante y el receptor puede en ocasiones asociarse a trastornos en la progenie eritroide desarrollada a partir de la médula ósea trasplantada, caracterizado por un funcionamiento tardío, inadecuado e incompleto de la misma. En este contexto, la aplasia pura de serie roja es la complicación más severa. Se han intentado tratamientos para la aplasia pura de serie roja post-TCPH con eritropoyetina o plasmaféresis, con relativo éxito. Algunos autores han informado también la utilización de globulina antilinfocitaria, asumiendo que dicha aplasia selectiva de la serie roja en la médula ósea trasplantada es mediada por un mecanismo inmune. En este trabajo se describe un paciente portador de una leucemia aguda en quien se realizó un TCPH alogeneico (ABO incompatible con su donante. Teniendo niveles bajos de aglutininas contra el grupo sanguíneo de la donante, desarrolló una aplasia pura de serie roja post - TCPH. La misma no mejoró con tratamiento con eritropoyetina o con un refuerzo de progenitores hematopoyéticos de sangre periférica de la misma donante (boost, resolviéndose totalmente luego de un tratamiento exitoso con globulina antilinfocitaria de origen equino.ABO incompatibility in allogeneic bone marrow transplantation may be associated with incomplete or delayed erythroid engraftment, being pure red cell aplasia (PRCA the most severe complication in this setting. Attempts for the treatment of PRCA have been made with erythropoietin or with plasmapheresis with relative success, and some authors have reported the reversibility of PRCA with antilymphocyte globulin (ALG or ATG, based on the assumption that PRCA might be immunologically mediated. We report herewith a patient with acute leukemia who developed post - BMT pure red cell aplasia. His sibling donor (sister was HLA identical and ABO incompatible, having low agglutinin

Incompatibility of torsion with the Gauss-Bonnet combination in the bosonic string

International Nuclear Information System (INIS)

Bern, Z.; Shimada, T.; Hochberg, D.

1987-01-01

In general, either manifest unitarity or the inclusion of the antisymmetric tensor field strength as torsion can be trivially implemented via field redefinitions in string theory low energy effective actions. However, requiring both simultaneously is explicitly shown to be incompatible in the bosonic string effective action. We also discuss the usefulness of the redefinition theorem as a technical tool. (orig.)

Current trends in platelet transfusions practice: The role of ABO-RhD and human leukocyte antigen incompatibility

Directory of Open Access Journals (Sweden)

Serena Valsami

2015-01-01

Full Text Available Platelet transfusions have contributed to the revolutionary modern treatment of hypoproliferative thrombocytopenia. Despite the long-term application of platelet transfusion in therapeutics, all aspects of their optimal use (i.e., in cases of ABO and/or Rh (D incompatibility have not been definitively determined yet. We reviewed the available data on transfusion practices and outcome in ABO and RhD incompatibility and platelet refractoriness due to anti-human leukocyte antigen (HLA antibodies. Transfusion of platelets with major ABO-incompatibility is related to reduced posttransfusion platelet (PLT count increments, compared to ABO-identical and minor, but still are equally effective in preventing clinical bleeding. ABO-minor incompatible transfusions pose the risk of an acute hemolytic reaction of the recipient that is not always related to high anti-A, B donor titers. ABO-identical PLT transfusion seems to be the most effective and safest therapeutic strategy. Exclusive ABO-identical platelet transfusion policy could be feasible, but alternative approaches could facilitate platelet inventory management. Transfusion of platelets from RhD positive donors to RhD negative patients is considered to be effective and safe though is associated with low rate of anti-D alloimmunization due to contaminating red blood cells. The prevention of D alloimmunization is recommended only for women of childbearing age. HLA alloimmunization is a major cause of platelet refractoriness. Managing patients with refractoriness with cross-matched or HLA-matched platelets is the current practice although data are still lacking for the efficacy of this practice in terms of clinical outcome. Leukoreduction contributes to the reduction of both HLA and anti-D alloimmunization.

Contrasted patterns of molecular evolution in dominant and recessive self-incompatibility haplotypes in Arabidopsis.

Directory of Open Access Journals (Sweden)

Pauline M Goubet

Full Text Available Self-incompatibility has been considered by geneticists a model system for reproductive biology and balancing selection, but our understanding of the genetic basis and evolution of this molecular lock-and-key system has remained limited by the extreme level of sequence divergence among haplotypes, resulting in a lack of appropriate genomic sequences. In this study, we report and analyze the full sequence of eleven distinct haplotypes of the self-incompatibility locus (S-locus in two closely related Arabidopsis species, obtained from individual BAC libraries. We use this extensive dataset to highlight sharply contrasted patterns of molecular evolution of each of the two genes controlling self-incompatibility themselves, as well as of the genomic region surrounding them. We find strong collinearity of the flanking regions among haplotypes on each side of the S-locus together with high levels of sequence similarity. In contrast, the S-locus region itself shows spectacularly deep gene genealogies, high variability in size and gene organization, as well as complete absence of sequence similarity in intergenic sequences and striking accumulation of transposable elements. Of particular interest, we demonstrate that dominant and recessive S-haplotypes experience sharply contrasted patterns of molecular evolution. Indeed, dominant haplotypes exhibit larger size and a much higher density of transposable elements, being matched only by that in the centromere. Overall, these properties highlight that the S-locus presents many striking similarities with other regions involved in the determination of mating-types, such as sex chromosomes in animals or in plants, or the mating-type locus in fungi and green algae.

North-American norms for name disagreement: pictorial stimuli naming discrepancies.

Directory of Open Access Journals (Sweden)

Mary O'Sullivan

Full Text Available Pictorial stimuli are commonly used by scientists to explore central processes; including memory, attention, and language. Pictures that have been collected and put into sets for these purposes often contain visual ambiguities that lead to name disagreement amongst subjects. In the present work, we propose new norms which reflect these sources of name disagreement, and we apply this method to two sets of pictures: the Snodgrass and Vanderwart (S&V set and the Bank of Standardized Stimuli (BOSS. Naming responses of the presented pictures were classified within response categories based on whether they were correct, incorrect, or equivocal. To characterize the naming strategy where an alternative name was being used, responses were further divided into different sub-categories that reflected various sources of name disagreement. Naming strategies were also compared across the two sets of stimuli. Results showed that the pictures of the S&V set and the BOSS were more likely to elicit alternative specific and equivocal names, respectively. It was also found that the use of incorrect names was not significantly different across stimulus sets but that errors were more likely caused by visual ambiguity in the S&V set and by a misuse of names in the BOSS. Norms for name disagreement presented in this paper are useful for subsequent research for their categorization and elucidation of name disagreement that occurs when choosing visual stimuli from one or both stimulus sets. The sources of disagreement should be examined carefully as they help to provide an explanation of errors and inconsistencies of many concepts during picture naming tasks.

Geometrical model of multiple production

International Nuclear Information System (INIS)

Chikovani, Z.E.; Jenkovszky, L.L.; Kvaratshelia, T.M.; Struminskij, B.V.

1988-01-01

The relation between geometrical and KNO-scaling and their violation is studied in a geometrical model of multiple production of hadrons. Predictions concerning the behaviour of correlation coefficients at future accelerators are given

Pragmatic geometric model evaluation

Science.gov (United States)

Pamer, Robert

2015-04-01

Quantification of subsurface model reliability is mathematically and technically demanding as there are many different sources of uncertainty and some of the factors can be assessed merely in a subjective way. For many practical applications in industry or risk assessment (e. g. geothermal drilling) a quantitative estimation of possible geometric variations in depth unit is preferred over relative numbers because of cost calculations for different scenarios. The talk gives an overview of several factors that affect the geometry of structural subsurface models that are based upon typical geological survey organization (GSO) data like geological maps, borehole data and conceptually driven construction of subsurface elements (e. g. fault network). Within the context of the trans-European project "GeoMol" uncertainty analysis has to be very pragmatic also because of different data rights, data policies and modelling software between the project partners. In a case study a two-step evaluation methodology for geometric subsurface model uncertainty is being developed. In a first step several models of the same volume of interest have been calculated by omitting successively more and more input data types (seismic constraints, fault network, outcrop data). The positions of the various horizon surfaces are then compared. The procedure is equivalent to comparing data of various levels of detail and therefore structural complexity. This gives a measure of the structural significance of each data set in space and as a consequence areas of geometric complexity are identified. These areas are usually very data sensitive hence geometric variability in between individual data points in these areas is higher than in areas of low structural complexity. Instead of calculating a multitude of different models by varying some input data or parameters as it is done by Monte-Carlo-simulations, the aim of the second step of the evaluation procedure (which is part of the ongoing work) is to

Results of exchange transfusions in newborns without blood group incompatibility

Directory of Open Access Journals (Sweden)

Servet Yel

2013-01-01

Full Text Available Objective: Hyperbilirubinemia is a common problem ofneonatal period that has high morbidity and mortality.Blood exchange is the most effective and urgent treatmentmodality for very high bilirubin levels that can lead toneurotoxicity called as kernicterus. The aim of this studywas to compare 90 minutes exchange transfusion withthat of 120 minutes.Methods: This study was performed at Dicle UniversityMedical Faculty, Neonatal Unit between July 2007 andJune 2008. A total of 36 term newborn (38 - 42 gestationalweek without blood group incompatibility and withtotal serum bilirubin levels over 25 mg/dl were included.Newborns were randomly assigned in two groups eachof them comprise 18 babies as Group 1 underwent 90minute-exchange and Group 2 120 minute. Effectivenessand complications of exchange transfusion were recorded.Newborns with Rh, ABO or subgroup incompatibilities,prematurity or small for gestational age, septicemia,hypothyroidism, G6PD enzyme deficiency, intrauterineinfections, diabetic mother’s baby, hemolytic disease ormetabolic diseases were excluded.Results: There were no significant differences in thebody weight, gestational age, postnatal age, age of mother,total bilirubin and albumin levels, the number of bloodexchange, hospital stay days and complications betweentwo groups (p>0.05. However, mean phototherapy durationwas significantly shorter in 120 minutes transfusiongroup compared with 90 minutes group (p<0.001.Conclusion: Our results indicated that 90 minutes wassufficient for an effective exchange transfusion in severehyperbilirubinemic newborn infants. However longer exchangetransfusion durations may shorten the duration ofphototherapy.Key words: Indirect hyperbilirubinemia, exchange transfusion,newborns, outcome

Soft hadronic production by ECCO in the geometrical branching model

International Nuclear Information System (INIS)

Pan, J.; Hwa, R.C.

1993-01-01

Soft production of hadrons in hadronic collisions is described in the geometrical branching model and implemented by the eikonal cascade code (ECCO). It is shown that the major global features of multiparticle production can be reproduced by one essential characterization of the dynamics of branching, namely, a scaling law for the mass distribution of daughter clusters. Without further adjustment of any parameters, the event generator can produce local features of multiplicity fluctuations in agreement with the NA22 intermittency data. The scaling exponent ν is determined to be 1.522 at √s =22 GeV, independent of the dimensionality of the intermittency analysis. It is shown that ν is approximately independent of the collision energy

Graphene geometric diodes for terahertz rectennas

International Nuclear Information System (INIS)

Zhu Zixu; Joshi, Saumil; Grover, Sachit; Moddel, Garret

2013-01-01

We demonstrate a new thin-film graphene diode called a geometric diode that relies on geometric asymmetry to provide rectification at 28 THz. The geometric diode is coupled to an optical antenna to form a rectenna that rectifies incoming radiation. This is the first reported graphene-based antenna-coupled diode working at 28 THz, and potentially at optical frequencies. The planar structure of the geometric diode provides a low RC time constant, on the order of 10 −15 s, required for operation at optical frequencies, and a low impedance for efficient power transfer from the antenna. Fabricated geometric diodes show asymmetric current–voltage characteristics consistent with Monte Carlo simulations for the devices. Rectennas employing the geometric diode coupled to metal and graphene antennas rectify 10.6 µm radiation, corresponding to an operating frequency of 28 THz. The graphene bowtie antenna is the first demonstrated functional antenna made using graphene. Its response indicates that graphene is a suitable terahertz resonator material. Applications for this terahertz diode include terahertz-wave and optical detection, ultra-high-speed electronics and optical power conversion. (paper)

Geometric solitons of Hamiltonian flows on manifolds

Energy Technology Data Exchange (ETDEWEB)

Song, Chong, E-mail: songchong@xmu.edu.cn [School of Mathematical Sciences, Xiamen University, Xiamen 361005 (China); Sun, Xiaowei, E-mail: sunxw@cufe.edu.cn [School of Applied Mathematics, Central University of Finance and Economics, Beijing 100081 (China); Wang, Youde, E-mail: wyd@math.ac.cn [Academy of Mathematics and Systems Science, Chinese Academy of Sciences, Beijing 100190 (China)

2013-12-15

It is well-known that the LIE (Locally Induction Equation) admit soliton-type solutions and same soliton solutions arise from different and apparently irrelevant physical models. By comparing the solitons of LIE and Killing magnetic geodesics, we observe that these solitons are essentially decided by two families of isometries of the domain and the target space, respectively. With this insight, we propose the new concept of geometric solitons of Hamiltonian flows on manifolds, such as geometric Schrödinger flows and KdV flows for maps. Moreover, we give several examples of geometric solitons of the Schrödinger flow and geometric KdV flow, including magnetic curves as geometric Schrödinger solitons and explicit geometric KdV solitons on surfaces of revolution.

Deciphering the Theobroma cacao self-incompatibility system: from genomics to diagnostic markers for self-compatibility.

Science.gov (United States)

Lanaud, Claire; Fouet, Olivier; Legavre, Thierry; Lopes, Uilson; Sounigo, Olivier; Eyango, Marie Claire; Mermaz, Benoit; Da Silva, Marcos Ramos; Loor Solorzano, Rey Gaston; Argout, Xavier; Gyapay, Gabor; Ebaiarrey, Herman Ebai; Colonges, Kelly; Sanier, Christine; Rivallan, Ronan; Mastin, Géraldine; Cryer, Nicholas; Boccara, Michel; Verdeil, Jean-Luc; Efombagn Mousseni, Ives Bruno; Peres Gramacho, Karina; Clément, Didier

2017-10-13

Cocoa self-compatibility is an important yield factor and has been described as being controlled by a late gameto-sporophytic system expressed only at the level of the embryo sac. It results in gametic non-fusion and involves several loci. In this work, we identified two loci, located on chromosomes 1 and 4 (CH1 and CH4), involved in cocoa self-incompatibility by two different processes. Both loci are responsible for gametic selection, but only one (the CH4 locus) is involved in the main fruit drop. The CH1 locus acts prior to the gamete fusion step and independently of the CH4 locus. Using fine-mapping and genome-wide association studies, we focused analyses on restricted regions and identified candidate genes. Some of them showed a differential expression between incompatible and compatible reactions. Immunolocalization experiments provided evidence of CH1 candidate genes expressed in ovule and style tissues. Highly polymorphic simple sequence repeat (SSR) diagnostic markers were designed in the CH4 region that had been identified by fine-mapping. They are characterized by a strong linkage disequilibrium with incompatibility alleles, thus allowing the development of efficient diagnostic markers predicting self-compatibility and fruit setting according to the presence of specific alleles or genotypes. SSR alleles specific to self-compatible Amelonado and Criollo varieties were also identified, thus allowing screening for self-compatible plants in cocoa populations. © The Author 2017. Published by Oxford University Press on behalf of the Society for Experimental Biology.

A new geometrical gravitational theory

International Nuclear Information System (INIS)

Obata, T.; Chiba, J.; Oshima, H.

1981-01-01

A geometrical gravitational theory is developed. The field equations are uniquely determined apart from one unknown dimensionless parameter ω 2 . It is based on an extension of the Weyl geometry, and by the extension the gravitational coupling constant and the gravitational mass are made to be dynamical and geometrical. The fundamental geometrical objects in the theory are a metric gsub(μν) and two gauge scalars phi and psi. The theory satisfies the weak equivalence principle, but breaks the strong one generally. u(phi, psi) = phi is found out on the assumption that the strong one keeps holding good at least for bosons of low spins. Thus there is the simple correspondence between the geometrical objects and the gravitational objects. Since the theory satisfies the weak one, the inertial mass is also dynamical and geometrical in the same way as is the gravitational mass. Moreover, the cosmological term in the theory is a coscalar of power -4 algebraically made of psi and u(phi, psi), so it is dynamical, too. Finally spherically symmetric exact solutions are given. The permissible range of the unknown parameter ω 2 is experimentally determined by applying the solutions to the solar system. (author)

Mobile Watermarking against Geometrical Distortions

Directory of Open Access Journals (Sweden)

Jing Zhang

2015-08-01

Full Text Available Mobile watermarking robust to geometrical distortions is still a great challenge. In mobile watermarking, efficient computation is necessary because mobile devices have very limited resources due to power consumption. In this paper, we propose a low-complexity geometrically resilient watermarking approach based on the optimal tradeoff circular harmonic function (OTCHF correlation filter and the minimum average correlation energy Mellin radial harmonic (MACE-MRH correlation filter. By the rotation, translation and scale tolerance properties of the two kinds of filter, the proposed watermark detector can be robust to geometrical attacks. The embedded watermark is weighted by a perceptual mask which matches very well with the properties of the human visual system. Before correlation, a whitening process is utilized to improve watermark detection reliability. Experimental results demonstrate that the proposed watermarking approach is computationally efficient and robust to geometrical distortions.

Operational geometric phase for mixed quantum states

International Nuclear Information System (INIS)

Andersson, O; Heydari, H

2013-01-01

The geometric phase has found a broad spectrum of applications in both classical and quantum physics, such as condensed matter and quantum computation. In this paper, we introduce an operational geometric phase for mixed quantum states, based on spectral weighted traces of holonomies, and we prove that it generalizes the standard definition of the geometric phase for mixed states, which is based on quantum interferometry. We also introduce higher order geometric phases, and prove that under a fairly weak, generically satisfied, requirement, there is always a well-defined geometric phase of some order. Our approach applies to general unitary evolutions of both non-degenerate and degenerate mixed states. Moreover, since we provide an explicit formula for the geometric phase that can be easily implemented, it is particularly well suited for computations in quantum physics. (paper)

THE FUTURE SPACEBORNE HYPERSPECTRAL IMAGER ENMAP: ITS IN-FLIGHT RADIOMETRIC AND GEOMETRIC CALIBRATION CONCEPT

Directory of Open Access Journals (Sweden)

M. Schneider

2012-07-01

Full Text Available The German Aerospace Center DLR – namely the Earth Observation Center EOC and the German Space Operations Center GSOC – is responsible for the establishment of the ground segment of the future German hyperspectral satellite mission EnMAP (Environmental Mapping and Analysis Program. The Earth Observation Center has long lasting experiences with air- and spaceborne acquisition, processing, and analysis of hyperspectral image data. In the first part of this paper, an overview of the radiometric in-flight calibration concept including dark value measurements, deep space measurements, internal lamps measurements and sun measurements is presented. Complemented by pre-launch calibration and characterization these analyses will deliver a detailed and quantitative assessment of possible changes of spectral and radiometric characteristics of the hyperspectral instrument, e.g. due to degradation of single elements. A geometric accuracy of 100 m, which will be improved to 30 m with respect to a used reference image, if it exists, will be achieved by ground processing. Therfore, and for the required co-registration accuracy between SWIR and VNIR channels, additional to the radiometric calibration, also a geometric calibration is necessary. In the second part of this paper, the concept of the geometric calibration is presented in detail. The geometric processing of EnMAP scenes will be based on laboratory calibration results. During repeated passes over selected calibration areas images will be acquired. The update of geometric camera model parameters will be done by an adjustment using ground control points, which will be extracted by automatic image matching. In the adjustment, the improvements of the attitude angles (boresight angles, the improvements of the interior orientation (view vector and the improvements of the position data are estimated. In this paper, the improvement of the boresight angles is presented in detail as an example. The other

The Future Spaceborne Hyperspectral Imager Enmap: its In-Flight Radiometric and Geometric Calibration Concept

Science.gov (United States)

Schneider, M.; Müller, R.; Krawzcyk, H.; Bachmann, M.; Storch, T.; Mogulsky, V.; Hofer, S.

2012-07-01

The German Aerospace Center DLR - namely the Earth Observation Center EOC and the German Space Operations Center GSOC - is responsible for the establishment of the ground segment of the future German hyperspectral satellite mission EnMAP (Environmental Mapping and Analysis Program). The Earth Observation Center has long lasting experiences with air- and spaceborne acquisition, processing, and analysis of hyperspectral image data. In the first part of this paper, an overview of the radiometric in-flight calibration concept including dark value measurements, deep space measurements, internal lamps measurements and sun measurements is presented. Complemented by pre-launch calibration and characterization these analyses will deliver a detailed and quantitative assessment of possible changes of spectral and radiometric characteristics of the hyperspectral instrument, e.g. due to degradation of single elements. A geometric accuracy of 100 m, which will be improved to 30 m with respect to a used reference image, if it exists, will be achieved by ground processing. Therfore, and for the required co-registration accuracy between SWIR and VNIR channels, additional to the radiometric calibration, also a geometric calibration is necessary. In the second part of this paper, the concept of the geometric calibration is presented in detail. The geometric processing of EnMAP scenes will be based on laboratory calibration results. During repeated passes over selected calibration areas images will be acquired. The update of geometric camera model parameters will be done by an adjustment using ground control points, which will be extracted by automatic image matching. In the adjustment, the improvements of the attitude angles (boresight angles), the improvements of the interior orientation (view vector) and the improvements of the position data are estimated. In this paper, the improvement of the boresight angles is presented in detail as an example. The other values and combinations

OFFSITE RADIOLOGICAL CONSEQUENCE CALCULATION FOR THE BOUNDING MIXING OF INCOMPATIBLE MATERIALS ACCIDENT

International Nuclear Information System (INIS)

SANDGREN, K.R.

2006-01-01

This document quantifies the offsite radiological consequence of the bounding mixing of incompatible materials accident for comparison with the 25 rem Evaluation Guideline established in Appendix A of DOE-STD-3009. The bounding accident is an inadvertent addition of acid to a waste tank. The calculated offsite dose does not challenge the Evaluation Guideline. Revision 4 updates the analysis to consider bulk chemical additions to single shell tanks (SSTs)

Relationship between perception of parental communication styles incompatibility amongst high school students

OpenAIRE

Mohammad Akbari Booreng

2017-01-01

Family is an influential setting in physical and mental health of children and adolescents. Accordingly, studying the atmosphere and current relationships in the family in terms of their effect on children and adolescents is highly necessary. This study was designed and conducted to investigate the relationship between students' perception of parental communication styles and their own incompatibility. In this descriptive study, population consisted of female students of high school, of whom,...

The three names

NARCIS (Netherlands)

Bas Jongenelen

2011-01-01

Two spectators are each asked to think of a girl's name (because your sister in law is pregnant and names are a big issue at the moment in your family.) You explain that you have a boy's name in your head, and you ask the spectators to think what this boy's name might be. You write three names on a

Geometrical factors in the perception of sacredness

DEFF Research Database (Denmark)

Costa, Marco; Bonetti, Leonardo

2016-01-01

Geometrical and environmental factors in the perception of sacredness, dominance, and attractiveness were assessed by 137 participants in five tests. In the first test, a two-alternative forced-choice paradigm was used to test the perception of sacredness, dominance, and attractiveness in geometr......Geometrical and environmental factors in the perception of sacredness, dominance, and attractiveness were assessed by 137 participants in five tests. In the first test, a two-alternative forced-choice paradigm was used to test the perception of sacredness, dominance, and attractiveness...... in geometrical figures differing in shape, verticality, size, and symmetry. Verticality, symmetry, and convexity were found to be important factors in the perception of sacredness. In the second test, participants had to mark the point inside geometrical surfaces that was perceived as most sacred, dominant....... Geometrical factors in the perception of sacredness, dominance, and attractiveness were largely overlapping....

Asymptotic and geometrical quantization

International Nuclear Information System (INIS)

Karasev, M.V.; Maslov, V.P.

1984-01-01

The main ideas of geometric-, deformation- and asymptotic quantizations are compared. It is shown that, on the one hand, the asymptotic approach is a direct generalization of exact geometric quantization, on the other hand, it generates deformation in multiplication of symbols and Poisson brackets. Besides investigating the general quantization diagram, its applications to the calculation of asymptotics of a series of eigenvalues of operators possessing symmetry groups are considered

Dissection of the Mechanism for Compatible and Incompatible Graft Combinations of Citrus grandis (L. Osbeck (‘Hongmian Miyou’

Directory of Open Access Journals (Sweden)

Wen He

2018-02-01

Full Text Available ‘Hongmian miyou’ (Citrus grandis L. Osbeck is mutated from ‘Guanxi miyou’, with a different spongy layer coloration. Trifoliate orange (Poncirus trifoliata is widely used as rootstocks in ‘Guanxi miyou’ grafting, whereas ‘Hongmian miyou’ is incompatible with available trifoliate orange rootstocks. To explore the reasons for the etiolation of leaves of ‘Hongmian miyou’/trifoliate orange, anatomical differences among different graft unions, gene expression profiles, and auxin levels of scion were investigated in this study. A histological assay indicated that there was no significant difference in anatomical structure between the compatible and incompatible combinations. A total of 1950 significant differentially-expressed genes (DEGs were identified and analyzed. The Kyoto Encyclopedia of Genes and Genomes (KEGG pathway enrichment analysis revealed that genes involved in carbohydrate metabolism, energy metabolism, amino acid metabolism, and plant hormone signal transduction were significantly enriched. Moreover, the expression of nine genes in the auxin pathway were upregulated and three were downregulated in compatible combinations compared with those in the incompatible group. Further experiments verified that indole-3-acetic acid (IAA content increases in the compatible graft combination, which suggests that IAA might promote graft compatibility.

Geometric inequalities for black holes

International Nuclear Information System (INIS)

Dain, Sergio

2013-01-01

Full text: A geometric inequality in General Relativity relates quantities that have both a physical interpretation and a geometrical definition. It is well known that the parameters that characterize the Kerr-Newman black hole satisfy several important geometric inequalities. Remarkably enough, some of these inequalities also hold for dynamical black holes. This kind of inequalities, which are valid in the dynamical and strong field regime, play an important role in the characterization of the gravitational collapse. They are closed related with the cosmic censorship conjecture. In this talk I will review recent results in this subject. (author)

Optical traps with geometric aberrations

International Nuclear Information System (INIS)

Roichman, Yael; Waldron, Alex; Gardel, Emily; Grier, David G.

2006-01-01

We assess the influence of geometric aberrations on the in-plane performance of optical traps by studying the dynamics of trapped colloidal spheres in deliberately distorted holographic optical tweezers. The lateral stiffness of the traps turns out to be insensitive to moderate amounts of coma, astigmatism, and spherical aberration. Moreover holographic aberration correction enables us to compensate inherent shortcomings in the optical train, thereby adaptively improving its performance. We also demonstrate the effects of geometric aberrations on the intensity profiles of optical vortices, whose readily measured deformations suggest a method for rapidly estimating and correcting geometric aberrations in holographic trapping systems

Geometric inequalities for black holes

Energy Technology Data Exchange (ETDEWEB)

Dain, Sergio [Universidad Nacional de Cordoba (Argentina)

2013-07-01

Full text: A geometric inequality in General Relativity relates quantities that have both a physical interpretation and a geometrical definition. It is well known that the parameters that characterize the Kerr-Newman black hole satisfy several important geometric inequalities. Remarkably enough, some of these inequalities also hold for dynamical black holes. This kind of inequalities, which are valid in the dynamical and strong field regime, play an important role in the characterization of the gravitational collapse. They are closed related with the cosmic censorship conjecture. In this talk I will review recent results in this subject. (author)

Interallelic and intergenic incompatibilities of the Prdm9 (Hst1 gene in mouse hybrid sterility.

Directory of Open Access Journals (Sweden)

Petr Flachs

Full Text Available The Dobzhansky-Muller model of incompatibilities explains reproductive isolation between species by incorrect epistatic interactions. Although the mechanisms of speciation are of great interest, no incompatibility has been characterized at the gene level in mammals. The Hybrid sterility 1 gene (Hst1 participates in the arrest of meiosis in F(1 males of certain strains from two Mus musculus subspecies, e.g., PWD from M. m. musculus and C57BL/6J (henceforth B6 from M. m. domesticus. Hst1 has been identified as a meiotic PR-domain gene (Prdm9 encoding histone 3 methyltransferase in the male offspring of PWD females and B6 males, (PWD×B6F(1. To characterize the incompatibilities underlying hybrid sterility, we phenotyped reproductive and meiotic markers in males with altered copy numbers of Prdm9. A partial rescue of fertility was observed upon removal of the B6 allele of Prdm9 from the azoospermic (PWD×B6F(1 hybrids, whereas removing one of the two Prdm9 copies in PWD or B6 background had no effect on male reproduction. Incompatibility(ies not involving Prdm9(B6 also acts in the (PWD×B6F(1 hybrids, since the correction of hybrid sterility by Prdm9(B6 deletion was not complete. Additions and subtractions of Prdm9 copies, as well as allelic replacements, improved meiotic progression and fecundity also in the progeny-producing reciprocal (B6×PWDF(1 males. Moreover, an increased dosage of Prdm9 and reciprocal cross enhanced fertility of other sperm-carrying male hybrids, (PWD×B6-C3H.Prdm9F(1, harboring another Prdm9 allele of M. m. domesticus origin. The levels of Prdm9 mRNA isoforms were similar in the prepubertal testes of all types of F(1 hybrids of PWD with B6 and B6-C3H.Prdm9 despite their different prospective fertility, but decreased to 53% after removal of Prdm9(B6. Therefore, the Prdm9(B6 allele probably takes part in posttranscriptional dominant-negative hybrid interaction(s absent in the parental strains.

Interallelic and intergenic incompatibilities of the Prdm9 (Hst1) gene in mouse hybrid sterility.

Science.gov (United States)

Flachs, Petr; Mihola, Ondřej; Simeček, Petr; Gregorová, Soňa; Schimenti, John C; Matsui, Yasuhisa; Baudat, Frédéric; de Massy, Bernard; Piálek, Jaroslav; Forejt, Jiří; Trachtulec, Zdenek

2012-01-01

The Dobzhansky-Muller model of incompatibilities explains reproductive isolation between species by incorrect epistatic interactions. Although the mechanisms of speciation are of great interest, no incompatibility has been characterized at the gene level in mammals. The Hybrid sterility 1 gene (Hst1) participates in the arrest of meiosis in F(1) males of certain strains from two Mus musculus subspecies, e.g., PWD from M. m. musculus and C57BL/6J (henceforth B6) from M. m. domesticus. Hst1 has been identified as a meiotic PR-domain gene (Prdm9) encoding histone 3 methyltransferase in the male offspring of PWD females and B6 males, (PWD×B6)F(1). To characterize the incompatibilities underlying hybrid sterility, we phenotyped reproductive and meiotic markers in males with altered copy numbers of Prdm9. A partial rescue of fertility was observed upon removal of the B6 allele of Prdm9 from the azoospermic (PWD×B6)F(1) hybrids, whereas removing one of the two Prdm9 copies in PWD or B6 background had no effect on male reproduction. Incompatibility(ies) not involving Prdm9(B6) also acts in the (PWD×B6)F(1) hybrids, since the correction of hybrid sterility by Prdm9(B6) deletion was not complete. Additions and subtractions of Prdm9 copies, as well as allelic replacements, improved meiotic progression and fecundity also in the progeny-producing reciprocal (B6×PWD)F(1) males. Moreover, an increased dosage of Prdm9 and reciprocal cross enhanced fertility of other sperm-carrying male hybrids, (PWD×B6-C3H.Prdm9)F(1), harboring another Prdm9 allele of M. m. domesticus origin. The levels of Prdm9 mRNA isoforms were similar in the prepubertal testes of all types of F(1) hybrids of PWD with B6 and B6-C3H.Prdm9 despite their different prospective fertility, but decreased to 53% after removal of Prdm9(B6). Therefore, the Prdm9(B6) allele probably takes part in posttranscriptional dominant-negative hybrid interaction(s) absent in the parental strains.

Des loyautés incompatibles

Directory of Open Access Journals (Sweden)

Daniel Bizeul

2007-06-01

Full Text Available Faire l’expérience directe des phénomènes, en participant aux activités des milieux concernés, représente un des moyens les plus naturels et les plus sûrs pour atteindre la complexité du monde social. C’est aussi un des moyens les plus perturbants pour le chercheur, souvent confronté aux interdits de contact entre des groupes dont les intérêts ou les principes de vie sont antagonistes. Établir des relations étroites avec des militants du Front national, certains d’entre eux « néo-nazis », certains vivant à quelques rues de chez soi, tout en étant « homo », avec pour proches amis des hommes de couleur, de plus entouré de personnes hostiles à ce parti, oblige ainsi à gérer des liens inconciliables. Un risque possible pour le chercheur est alors d’être soumis à des sentiments contradictoires et de mettre du temps pour aboutir à une analyse exempte de toute influence indue.Incompatible loyalties. Moral aspects of an immersion into the French National Front Party.Experiencing directly phenomenon while participating to activities of the concerned circles, represents one of the most natural and safer way to reach the complexity of the society. It is also one of the most disturbing means for the researcher, often confronted to interdicts of contacts between groups which interests or principles of life are antagonists. Creating close relationships with French National Front party activists, some of them “neo-nazis”, some of them living a few streets from your house, while being gay, with colored men as closed friends, surrounded by persons hostile to this party, thus forces to make opposed connections. A possible risk for the researcher can be to be divided between contradictory feelings and spending time finishing an analysis free of unwarranted influence.Lealtades incompatibles. Problemas morales derivados de los contactos con el « Frente nacional »Establecer un contacto directo con fenómenos de diferente

PollenCALC: Software for estimation of pollen compatibility of self-incompatible allo- and autotetraploid species

DEFF Research Database (Denmark)

Aguirre, Andrea A; Wollenweber, Bernd; Frei, Ursula K

2012-01-01

available for predicting pollen haplotype frequencies and pollen compatibility in tetraploid species. Results PollenCALC is a software tool written in C++ programming language that can predict pollen compatibility percentages for polyploid species with a two-locus (S, Z) self-incompatibility system...

Does Identity Incompatibility Lead to Disidentification? Internal Motivation to Be a Group Member Acts As Buffer for Sojourners from Independent Cultures, Whereas External Motivation Acts As Buffer for Sojourners from Interdependent Cultures

Science.gov (United States)

Matschke, Christina; Fehr, Jennifer

2017-01-01

Most individuals possess more than one relevant social identity, but these social identities can be more or less incompatible. Research has demonstrated that incompatibility between an established social identity and a potential new social identity impedes the integration into the new group. We argue that incompatibility is a strong risk factor for disidentification, i.e., a negative self-defining relation to a relevant group. The current research investigates the impact of incompatibilities on disidentification in the acculturation context. We propose that incompatibility between one’s cultural identities increases the disidentification with the receiving society. It has, however, been shown that the motivation to be a group member serves as a buffer against negative integration experiences. Moreover, research from the intercultural domain has shown that intrinsic and extrinsic motivation has specific effects for members of cultures that differ in self-construal. In a European sample of High school exchange students (Study 1, N = 378), it was found that incompatibility was positively related to disidentification, but only for less (but not more) intrinsically motivated newcomers. In an Asian sample of international university students (Study 2, N = 74), it was found that incompatibility was also positively related to disidentification, but only for less (but not more) extrinsically motivated newcomers. Thus, the findings demonstrate that the effect of incompatibility between social identities on disidentification can be buffered by motivation. The results suggest that, depending on cultural self-construal, individuals have different resources to buffer the negative effect of incompatibility on the social identity. PMID:28326055

Does Identity Incompatibility Lead to Disidentification? Internal Motivation to Be a Group Member Acts As Buffer for Sojourners from Independent Cultures, Whereas External Motivation Acts As Buffer for Sojourners from Interdependent Cultures.

Science.gov (United States)

Matschke, Christina; Fehr, Jennifer

2017-01-01

Most individuals possess more than one relevant social identity, but these social identities can be more or less incompatible. Research has demonstrated that incompatibility between an established social identity and a potential new social identity impedes the integration into the new group. We argue that incompatibility is a strong risk factor for disidentification, i.e., a negative self-defining relation to a relevant group. The current research investigates the impact of incompatibilities on disidentification in the acculturation context. We propose that incompatibility between one's cultural identities increases the disidentification with the receiving society. It has, however, been shown that the motivation to be a group member serves as a buffer against negative integration experiences. Moreover, research from the intercultural domain has shown that intrinsic and extrinsic motivation has specific effects for members of cultures that differ in self-construal. In a European sample of High school exchange students (Study 1, N = 378), it was found that incompatibility was positively related to disidentification, but only for less (but not more) intrinsically motivated newcomers. In an Asian sample of international university students (Study 2, N = 74), it was found that incompatibility was also positively related to disidentification, but only for less (but not more) extrinsically motivated newcomers. Thus, the findings demonstrate that the effect of incompatibility between social identities on disidentification can be buffered by motivation. The results suggest that, depending on cultural self-construal, individuals have different resources to buffer the negative effect of incompatibility on the social identity.

Geometric phases for nonlinear coherent and squeezed states

International Nuclear Information System (INIS)

Yang Dabao; Chen Ying; Chen Jingling; Zhang Fulin

2011-01-01

The geometric phases for standard coherent states which are widely used in quantum optics have attracted considerable attention. Nevertheless, few physicists consider the counterparts of nonlinear coherent states, which are useful in the description of the motion of a trapped ion. In this paper, the non-unitary and non-cyclic geometric phases for two nonlinear coherent and one squeezed states are formulated, respectively. Moreover, some of their common properties are discussed, such as gauge invariance, non-locality and nonlinear effects. The nonlinear functions have dramatic impacts on the evolution of the corresponding geometric phases. They speed the evolution up or down. So this property may have an application in controlling or measuring geometric phase. For the squeezed case, when the squeezed parameter r → ∞, the limiting value of the geometric phase is also determined by a nonlinear function at a given time and angular velocity. In addition, the geometric phases for standard coherent and squeezed states are obtained under a particular condition. When the time evolution undergoes a period, their corresponding cyclic geometric phases are achieved as well. And the distinction between the geometric phases of the two coherent states may be regarded as a geometric criterion.

Theoretical frameworks for the learning of geometrical reasoning

OpenAIRE

Jones, Keith

1998-01-01

With the growth in interest in geometrical ideas it is important to be clear about the nature of geometrical reasoning and how it develops. This paper provides an overview of three theoretical frameworks for the learning of geometrical reasoning: the van Hiele model of thinking in geometry, Fischbein’s theory of figural concepts, and Duval’s cognitive model of geometrical reasoning. Each of these frameworks provides theoretical resources to support research into the development of geometrical...

Computational analysis on the electrode geometric parameters for the reversible solid oxide cells

International Nuclear Information System (INIS)

Lee, Seoung-Ju; Jung, Chi-Young; Yi, Sung-Chul

2017-01-01

Increasing global energy demands have been accelerating the research and development of reversible electrochemical systems that can realize an efficient use of the intermittent renewable energy resources. This paper thus describes a numerical investigation of reversible solid oxide cells (RSOCs), for their high energy efficiency delivered from the high operating temperatures ranging from 600 to 1000 °C. Unlike the previous studies, a model-based strategy is applied for the simultaneous integration of different operating modes (namely, fuel cell and electrolysis cell modes) to enable more realistic predictions on the trade-off behavior of the effects of electrode design parameters on the cell performance. This approach was taken to investigate the effects of various geometric designs and operating parameters (electrode backing layer thickness; interconnector rib size; fuel gas composition) on the current-potential characteristic and the round-trip efficiency. The cell performance was significantly affected by the rib size, particularly when the backing layer was thin, because of the uneven distribution of the reactant species. Overall, this study provides insights into key geometric design parameters that dominate the performance of dual-mode RSOCs.

Parents accidentally substitute similar sounding sibling names more often than dissimilar names.

Directory of Open Access Journals (Sweden)

Zenzi M Griffin

Full Text Available When parents select similar sounding names for their children, do they set themselves up for more speech errors in the future? Questionnaire data from 334 respondents suggest that they do. Respondents whose names shared initial or final sounds with a sibling's reported that their parents accidentally called them by the sibling's name more often than those without such name overlap. Having a sibling of the same gender, similar appearance, or similar age was also associated with more frequent name substitutions. Almost all other name substitutions by parents involved other family members and over 5% of respondents reported a parent substituting the name of a pet, which suggests a strong role for social and situational cues in retrieving personal names for direct address. To the extent that retrieval cues are shared with other people or animals, other names become available and may substitute for the intended name, particularly when names sound similar.

Regular Polygons and Geometric Series.

Science.gov (United States)

Jarrett, Joscelyn A.

1982-01-01

Examples of some geometric illustrations of limits are presented. It is believed the limit concept is among the most important topics in mathematics, yet many students do not have good intuitive feelings for the concept, since it is often taught very abstractly. Geometric examples are suggested as meaningful tools. (MP)

ABO-Incompatible Adult Living Donor Liver Transplantation Under the Desensitization Protocol With Rituximab.

Science.gov (United States)

Song, G-W; Lee, S-G; Hwang, S; Kim, K-H; Ahn, C-S; Moon, D-B; Ha, T-Y; Jung, D-H; Park, G-C; Kim, W-J; Sin, M-H; Yoon, Y-I; Kang, W-H; Kim, S-H; Tak, E-Y

2016-01-01

ABO incompatibility is no longer considered a contraindication for adult living donor liver transplantation (ALDLT) due to various strategies to overcome the ABO blood group barrier. We report the largest single-center experience of ABO-incompatible (ABOi) ALDLT in 235 adult patients. The desensitization protocol included a single dose of rituximab and total plasma exchange. In addition, local graft infusion therapy, cyclophosphamide, or splenectomy was used for a certain time period, but these treatments were eventually discontinued due to adverse events. There were three cases (1.3%) of in-hospital mortality. The cumulative 3-year graft and patient survival rates were 89.2% and 92.3%, respectively, and were comparable to those of the ABO-compatible group (n = 1301). Despite promising survival outcomes, 17 patients (7.2%) experienced antibody-mediated rejection that manifested as diffuse intrahepatic biliary stricture; six cases required retransplantation, and three patients died. ABOi ALDLT is a feasible method for expanding a living liver donor pool, but the efficacy of the desensitization protocol in targeting B cell immunity should be optimized. © Copyright 2015 The American Society of Transplantation and the American Society of Transplant Surgeons.

Pig BMSCs Transfected with Human TFPI Combat Species Incompatibility and Regulate the Human TF Pathway in Vitro and in a Rodent Model

Directory of Open Access Journals (Sweden)

Hongchen Ji

2015-05-01

Full Text Available Background: The activation of tissue factor (TF is one of the major reasons for coagulation dysregulation after pig-to-primate xenotransplantation. Tissue factor pathway inhibitor (TFPI is the most important inhibitor of TF. Studies have demonstrated species incompatibility between pig TFPI and human TF. Methods: A pig-to-macaque heterotopic auxiliary liver transplantation model was established to determine the origin of activated TF. Chimeric proteins of human and pig TFPI were constructed to assess the role of Kunitz domains in species incompatibility. Immortalised pig bone marrow mesenchymal stem cells transfected with human TFPI were tested for their ability to inhibit clotting in vitro. Results: TF from recipient was activated early after liver xenotransplantation. Pig TFPI Kunitz domain 2 bound human FXa, but Kunitz domain 1 did not effectively inhibit human TF/FVIIa. Immortalised pig bone marrow mesenchymal cells (BMSCs transfected with human TFPI showed a prolonged recalcification time in vitro and in a rodent model. Conclusion: Recipient TF is relevant to dysregulated coagulation after xenotransplantation. Kunitz domain 1 plays the most important role in species incompatibility between pig TFPI and human TF, and clotting can be inhibited by human TFPI-transfected pig BMSCs. Our study shows a possible way to resolve the incompatibility of pig TFPI.

Geometric Invariants and Object Recognition.

Science.gov (United States)

1992-08-01

University of Chicago Press. Maybank , S.J. [1992], "The Projection of Two Non-coplanar Conics", in Geometric Invariance in Machine Vision, eds. J.L...J.L. Mundy and A. Zisserman, MIT Press, Cambridge, MA. Mundy, J.L., Kapur, .. , Maybank , S.J., and Quan, L. [1992a] "Geometric Inter- pretation of

Geographic Names

Data.gov (United States)

Minnesota Department of Natural Resources — The Geographic Names Information System (GNIS), developed by the United States Geological Survey in cooperation with the U.S. Board of Geographic Names, provides...

Geometric phases and quantum computation

International Nuclear Information System (INIS)

Vedral, V.

2005-01-01

Full text: In my lectures I will talk about the notion of the geometric phase and explain its relevance for both fundamental quantum mechanics as well as quantum computation. The phase will be at first introduced via the idea of Pancharatnam which involves interference of three or more light beams. This notion will then be generalized to the evolving quantum systems. I will discuss both pure and mixed states as well as unitary and non-unitary evolutions. I will also show how the concept of the vacuum induced geometric phase arises in quantum optics. A simple measurement scheme involving a Mach Zehnder interferometer will be presented and will be used to illustrate all the concepts in the lecture. Finally, I will expose a simple generalization of the geometric phase to evolving degenerate states. This will be seen to lead to the possibility of universal quantum computation using geometric effects only. Moreover, this contains a promise of intrinsically fault tolerant quantum information processing, whose prospects will be outlined at the end of the lecture. (author)

Guide to Geometric Algebra in Practice

CERN Document Server

Dorst, Leo

2011-01-01

This highly practical "Guide to Geometric Algebra in Practice" reviews algebraic techniques for geometrical problems in computer science and engineering, and the relationships between them. The topics covered range from powerful new theoretical developments, to successful applications, and the development of new software and hardware tools. This title: provides hands-on review exercises throughout the book, together with helpful chapter summaries; presents a concise introductory tutorial to conformal geometric algebra (CGA) in the appendices; examines the application of CGA for the d

Geometric Phases for Mixed States in Trapped Ions

International Nuclear Information System (INIS)

Lu Hongxia

2006-01-01

The generalization of geometric phase from the pure states to the mixed states may have potential applications in constructing geometric quantum gates. We here investigate the mixed state geometric phases and visibilities of the trapped ion system in both non-degenerate and degenerate cases. In the proposed quantum system, the geometric phases are determined by the evolution time, the initial states of trapped ions, and the initial states of photons. Moreover, special periods are gained under which the geometric phases do not change with the initial states changing of photon parts in both non-degenerate and degenerate cases. The high detection efficiency in the ion trap system implies that the mixed state geometric phases proposed here can be easily tested.

A molecular basis for the self-incompatibility system operating in Brassica sp.

OpenAIRE

H. G. Dickinson; I. N. Roberts

2014-01-01

Molecules contained in the sporophytically-derived coating of the pollen grain and in the superficial pellicle of the stigmatic papillae control the self-incompatibility response of the breeding system of Brassica. The stigmatic pellicle consists of a lipidic matrix in which float a mosaic of proteins many of which can rapidly be renewed from pools in the papillar cyto-plasm. A fraction of these proteins are involved in facilitating the passage of water to the pollen whilst another, possibly ...

Exact Solutions for Einstein's Hyperbolic Geometric Flow

International Nuclear Information System (INIS)

He Chunlei

2008-01-01

In this paper we investigate the Einstein's hyperbolic geometric flow and obtain some interesting exact solutions for this kind of flow. Many interesting properties of these exact solutions have also been analyzed and we believe that these properties of Einstein's hyperbolic geometric flow are very helpful to understanding the Einstein equations and the hyperbolic geometric flow

Incompatibility between X chromosome factor and pericentric heterochromatic region causes lethality in hybrids between Drosophila melanogaster and its sibling species.

Science.gov (United States)

Cattani, M Victoria; Presgraves, Daven C

2012-06-01

The Dobzhansky-Muller model posits that postzygotic reproductive isolation results from the evolution of incompatible epistatic interactions between species: alleles that function in the genetic background of one species can cause sterility or lethality in the genetic background of another species. Progress in identifying and characterizing factors involved in postzygotic isolation in Drosophila has remained slow, mainly because Drosophila melanogaster, with all of its genetic tools, forms dead or sterile hybrids when crossed to its sister species, D. simulans, D. sechellia, and D. mauritiana. To circumvent this problem, we used chromosome deletions and duplications from D. melanogaster to map two hybrid incompatibility loci in F(1) hybrids with its sister species. We mapped a recessive factor to the pericentromeric heterochromatin of the X chromosome in D. simulans and D. mauritiana, which we call heterochromatin hybrid lethal (hhl), which causes lethality in F(1) hybrid females with D. melanogaster. As F(1) hybrid males hemizygous for a D. mauritiana (or D. simulans) X chromosome are viable, the lethality of deficiency hybrid females implies that a dominant incompatible partner locus exists on the D. melanogaster X. Using small segments of the D. melanogaster X chromosome duplicated onto the Y chromosome, we mapped a dominant factor that causes hybrid lethality to a small 24-gene region of the D. melanogaster X. We provide evidence suggesting that it interacts with hhl(mau). The location of hhl is consistent with the emerging theme that hybrid incompatibilities in Drosophila involve heterochromatic regions and factors that interact with the heterochromatin.

Comparative transcriptomic analysis of virulence factors in Leptosphaeria maculans during compatible and incompatible interactions with canola

Directory of Open Access Journals (Sweden)

Humira Sonah

2016-12-01

Full Text Available Leptosphaeria maculans is a hemibiotrophic fungus that causes blackleg of canola (Brassica napus, one of the most devastating diseases of this crop. In the present study, transcriptome profiling of L. maculans was performed in an effort to understand and define the pathogenicity genes that govern both the biotrophic and the necrotrophic phase of the fungus, as well as those that separate a compatible from an incompatible interaction. For this purpose, comparative RNA-seq analyses were performed on L. maculans isolate D5 at four different time points following inoculation on susceptible cultivar Topas-wild or resistant near isogenic line Topas-Rlm2. Analysis of 1.6 billion Illumina reads readily identified differentially expressed genes that were over represented by candidate secretory effector proteins, CAZymes, and other pathogenicity genes. Comparisons between the compatible and incompatible interactions led to the identification of 28 effector proteins whose chronology and level of expression suggested a role in the establishment and maintenance of biotrophy with the plant. These included all known Avr genes of isolate D5 along with eight newly characterized effectors. In addition, another 15 effector proteins were found to be exclusively expressed during the necrotrophic phase of the fungus, which supports the concept that L. maculans has a separate and distinct arsenal contributing to each phase. As for CAZymes, they were often highly expressed at 3 dpi but with no difference in expression between the compatible and incompatible interactions, indicating that other factors were necessary to determine the outcome of the interaction. However, their significantly higher expression at 11 dpi in the compatible interaction confirmed that they contributed to the necrotrophic phase of the fungus. A notable exception was LysM genes whose high expression was singularly observed on the susceptible host at 7 dpi. In the case of TFs, their higher

Geometric control theory and sub-Riemannian geometry

CERN Document Server

Boscain, Ugo; Gauthier, Jean-Paul; Sarychev, Andrey; Sigalotti, Mario

2014-01-01

This volume presents recent advances in the interaction between Geometric Control Theory and sub-Riemannian geometry. On the one hand, Geometric Control Theory used the differential geometric and Lie algebraic language for studying controllability, motion planning, stabilizability and optimality for control systems. The geometric approach turned out to be fruitful in applications to robotics, vision modeling, mathematical physics etc. On the other hand, Riemannian geometry and its generalizations, such as  sub-Riemannian, Finslerian  geometry etc., have been actively adopting methods developed in the scope of geometric control. Application of these methods  has led to important results regarding geometry of sub-Riemannian spaces, regularity of sub-Riemannian distances, properties of the group  of diffeomorphisms of sub-Riemannian manifolds, local geometry and equivalence of distributions and sub-Riemannian structures, regularity of the Hausdorff volume.

SOME PROPERTIES OF GEOMETRIC DEA MODELS

Directory of Open Access Journals (Sweden)

Ozren Despić

2013-02-01

Full Text Available Some specific geometric data envelopment analysis (DEA models are well known to the researchers in DEA through so-called multiplicative or log-linear efficiency models. Valuable properties of these models were noted by several authors but the models still remain somewhat obscure and rarely used in practice. The purpose of this paper is to show from a mathematical perspective where the geometric DEA fits in relation to the classical DEA, and to provide a brief overview of some benefits in using geometric DEA in practice of decision making and/or efficiency measurement.

Lectures on geometrical properties of nuclei

International Nuclear Information System (INIS)

Myers, W.D.

1975-11-01

Material concerning the geometrical properties of nuclei is drawn from a number of different sources. The leptodermous nature of nuclear density distributions and potential wells is used to draw together the various geometrical properties of these systems and to provide a unified means for their description. Extensive use is made of expansions of radial properties in terms of the surface diffuseness. A strong case is made for the use of convolution as a geometrical ansatz for generating diffuse surface distributions because of the number of simplifications that arise which are of practical importance. 7 figures

What's in a Name? Interlocutors Dynamically Update Expectations about Shared Names.

Science.gov (United States)

Gegg-Harrison, Whitney M; Tanenhaus, Michael K

2016-01-01

In order to refer using a name, speakers must believe that their addressee knows about the link between the name and the intended referent. In cases where speakers and addressees learned a subset of names together, speakers are adept at using only the names their partner knows. But speakers do not always share such learning experience with their conversational partners. In these situations, what information guides speakers' choice of referring expression? A speaker who is uncertain about a names' common ground (CG) status often uses a name and description together. This N+D form allows speakers to demonstrate knowledge of a name, and could provide, even in the absence of miscommunication, useful evidence to the addressee regarding the speaker's knowledge. In cases where knowledge of one name is associated with knowledge of other names, this could provide indirect evidence regarding knowledge of other names that could support generalizations used to update beliefs about CG. Using Bayesian approaches to language processing as a guiding framework, we predict that interlocutors can use their partner's choice of referring expression, in particular their use of an N+D form, to generate more accurate beliefs regarding their partner's knowledge of other names. In Experiment 1, we find that domain experts are able to use their partner's referring expression choices to generate more accurate estimates of CG. In Experiment 2, we find that interlocutors are able to infer from a partner's use of an N+D form which other names that partner is likely to know or not know. Our results suggest that interlocutors can use the information conveyed in their partner's choice of referring expression to make generalizations that contribute to more accurate beliefs about what is shared with their partner, and further, that models of CG for reference need to account not just for the status of referents, but the status of means of referring to those referents.

Clinical evaluation of the endothelial tie-2 crossmatch in ABO compatible and ABO incompatible renal transplants.

Science.gov (United States)

Kafetzi, Maria L; Boletis, John N; Melexopoulou, Christine A; Tsakris, Athanassios; Iniotaki, Aliki G; Doxiadis, Ilias I N

2013-11-01

The necessity of detection of other than the classical major histocompatibility complex (MHC) and MHC class I-related chain A (MICA) directed antibodies prior to organ transplantation has already been repeatedly reported. A commercial flow cytometric endothelial crossmatch (CM) using isolated peripheral blood tie-2 positive cells provides a tool to detect non-MHC antibodies in addition to antibodies directed to MHC class I and II. The vast majority of circulating tie-2 positive cells expresses HLA-DR but not the A, B blood group antigens. Tie-2 cells are circulating surrogate endothelial cells. In this retrospective study we evaluated the endothelial CM in 51 renal transplantations, 30 with ABO compatible grafts and 21 with ABO incompatible grafts. Fifteen of the ABO compatible recipients (group A) developed unexplained rejection episodes (RE) while the remaining 15 had no RE (group B). Five cases of group A and none of group B had a positive tie-2 CM before transplantation (p=0.042). A positive tie-2 CM was also correlated with graft failure in ABO compatible transplants (p=0.02). No significant correlation was found between a positive pre-transplant tie-2 CM and RE in the ABO incompatible group. This study strongly suggest that a positive tie-2 CM may predict post-transplantation complications in ABO compatible grafts while negative reactions are not predictive. The test is not significantly correlated with RE in ABO incompatible grafts possibly due to applied desensitization. Copyright © 2013 American Society for Histocompatibility and Immunogenetics. Published by Elsevier Inc. All rights reserved.

Geometric phases for mixed states during cyclic evolutions

International Nuclear Information System (INIS)

Fu Libin; Chen Jingling

2004-01-01

The geometric phases of cyclic evolutions for mixed states are discussed in the framework of unitary evolution. A canonical 1-form is defined whose line integral gives the geometric phase, which is gauge invariant. It reduces to the Aharonov and Anandan phase in the pure state case. Our definition is consistent with the phase shift in the proposed experiment (Sjoeqvist et al 2000 Phys. Rev. Lett. 85 2845) for a cyclic evolution if the unitary transformation satisfies the parallel transport condition. A comprehensive geometric interpretation is also given. It shows that the geometric phases for mixed states share the same geometric sense with the pure states

Differential geometric structures

CERN Document Server

Poor, Walter A

2007-01-01

This introductory text defines geometric structure by specifying parallel transport in an appropriate fiber bundle and focusing on simplest cases of linear parallel transport in a vector bundle. 1981 edition.

What’s in a Name? – Consequences of Naming Non-Human Animals

DEFF Research Database (Denmark)

Borkfelt, Sune

2011-01-01

have consequences for the way we think about animals (human and non-human), peoples, species, places, things etc. Through a blend of history, philosophy and representational theory—and using examples from, among other things, the Bible, Martin Luther, colonialism/imperialism and contemporary ways......The act of naming is among the most basic actions of language. Indeed, it is naming something that enables us to communicate about it in specific terms, whether the object named is human or non-human, animate or inanimate. However, naming is not as uncomplicated as we may usually think and names...... of keeping and regarding non-human animals—this paper attempts to trace the importance of (both specific and generic) naming to our relationships with the non-human. It explores this topic from the naming of the animals in Genesis to the names given and used by scientists, keepers of companion animals, media...

Silicone implant incompatibility syndrome (SIIS) in a 57-year-old woman with unilateral silicone breast implant

DEFF Research Database (Denmark)

Schierbeck, Juliane; Davidsen, Jesper Rømhild; Grindsted Nielsen, Sanne

2017-01-01

implants can lead to different interstitial lung manifestations predominantly with granuloma evolvement, leading to the so-called silicone implant incompatibility syndrome (SIIS). This case describes a 57-year-old woman with multiple lung infiltrations and a left-sided breast implant. The implant had been...

АВ0-INCOMPATIBILITY IN ALLOGENEIC HEMATOPOIETIC STEM CELL TRANSPLANTATION: 15-YEARS EXPERIENCE OF R.M. GORBACHEVA MEMORIAL RESEARCH INSTITUTE FOR CHILDREN ONCOLOGY, HEMATOLOGY AND TRANSPLANTATION

Directory of Open Access Journals (Sweden)

M. A. Kucher

2016-01-01

Full Text Available Introduction. AB0-incompatibility in different types of allogeneic hematopoietic stem cell transplantation (HSCT may be an additional aggravating factor for the development of immunological complications and decrease treatment efficacy.Materials and methods. From May 1999 to December 2015 in R.M. Gorbacheva Memorial Research Institute for Children Oncology, Hematology and Transplantation 1131 patients with malignancies and hereditary diseases were included to the study, which were performed 1428 allogeneic HSCT: allogeneic unrelated – 814 (57.0 %, allogeneic related – 344 (24.1 %, haploidentical – 267 (18.7 %, umbilical cord blood in 3 patients (0.2 %. Age was 0–76 years, median – 25 years.Results. In 54.6 % of cases (n = 780 АВ0-incompatibility was determined: major – 37.8 % (n = 295; minor – 45.4 % (n = 354; combined – 16.8 % (n = 131. АВ0-incompatibility in allogeneic HSCT did not influence overall survival (p = 0.56, frequency of acute graftversus-host disease (GVHD (p = 0.2. There was an increased frequency of acute GVHD in combination with reduced intensity conditioning regimens and АВ0-incompatibility (30.8 % compared with myeloablative regimens (15.3 %; p = 0.002.Conclusion. The presence of АВ0-incompatibility is not a limiting factor to perform allogeneic HSCT, however, it demands high quality prophylaxis and sophisticated transfusion therapy to prevent immune complications.

External quality control of Pléiades orthoimagery – Part II: Geometric testing and validation of a Pléiades-1B orthoproduct covering Maussane test site

OpenAIRE

GRAZZINI Jacopo; AASTRAND Paer

2013-01-01

The goal of the current report is to provide with a final statement on the geometric capabilities of Pléiades sensors through the Quality Control (QC) of Pléiades-1B orthocorrected imagery following the recent validation of Pléiades-1A. Namely, the validation process aims at measuring the influence of different factors on the geometric accuracy of Pléiades-1B orthoimagery. For that purpose, a light benchmarking is implemented as: • a single far-from-nadir image datasetis evaluated using 2 ...

Geometrical optics and the diffraction phenomenon

International Nuclear Information System (INIS)

Timofeev, Aleksandr V

2005-01-01

This note outlines the principles of the geometrical optics of inhomogeneous waves whose description necessitates the use of complex values of the wave vector. Generalizing geometrical optics to inhomogeneous waves permits including in its scope the analysis of the diffraction phenomenon. (methodological notes)

Exogenous selection rather than cytonuclear incompatibilities shapes asymmetrical fitness of reciprocal Arabidopsis hybrids.

Science.gov (United States)

Muir, Graham; Ruiz-Duarte, Paola; Hohmann, Nora; Mable, Barbara K; Novikova, Polina; Schmickl, Roswitha; Guggisberg, Alessia; Koch, Marcus A

2015-04-01

Reciprocal crosses between species often display an asymmetry in the fitness of F1 hybrids. This pattern, referred to as isolation asymmetry or Darwin's corollary to Haldane's rule, is a general feature of reproductive isolation in plants, yet factors determining its magnitude and direction remain unclear. We evaluated reciprocal species crosses between two naturally hybridizing diploid species of Arabidopsis to assess the degree of isolation asymmetry at different postmating life stages. We found that pollen from Arabidopsis arenosa will usually fertilize ovules from Arabidopsis lyrata; the reverse receptivity being less complete. Maternal A. lyrata parents set more F1 hybrid seed, but germinate at lower frequency, reversing the asymmetry. As predicted by theory, A. lyrata (the maternal parent with lower seed viability in crosses) exhibited accelerated chloroplast evolution, indicating that cytonuclear incompatibilities may play a role in reproductive isolation. However, this direction of asymmetrical reproductive isolation is not replicated in natural suture zones, where delayed hybrid breakdown of fertility at later developmental stages, or later-acting selection against A. arenosa maternal hybrids (unrelated to hybrid fertility, e.g., substrate adaptation) may be responsible for an excess of A. lyrata maternal hybrids. Exogenous selection rather than cytonuclear incompatibilities thus shapes the asymmetrical postmating isolation in nature.

Evolution Controversy: A Phenomenon Prompted by the Incompatibility between Science and Religious Beliefs.

Science.gov (United States)

Paz-Y-Miño-C, Guillermo; Espinosa, Avelina

2015-06-01

The incompatibility between science and the belief in supernatural causation helps us understand why people do not accept evolution. Belief disrupts, distorts, delays, or stops (3Ds + S) the acceptance of scientific evidence. Here we examine the evolution controversy under three predictions of the incompatibility hypothesis. First, chronological-conflict-and-accommodation, which explains the historical re-emergence of antagonism between evolution and religion when advances in science continue to threaten the belief in supernatural causation; in such situations, creationists' rejection of and subsequent partial acceptance of the new scientific discoveries are expected. Second, change in evolution's acceptance as function of educational attainment, which explains the positive association between acceptance of evolution and level of education. And third, change in evolution's acceptance as function of religiosity, which explains the negative association between acceptance of evolution and level of religious beliefs. We rely on an ample assessment of the attitudes toward evolution by highly-educated audiences (i.e. research faculty, educators of prospective teachers, and college students in the United States) to characterize the associations among the understanding of science and evolution, personal religious convictions, and conservative ideology. We emphasize that harmonious coexistence between science and religion is illusory. If co-persisting in society, their relationship will fluctuate from moderate to intense antagonism.

Evolution Controversy: A Phenomenon Prompted by the Incompatibility between Science and Religious Beliefs

Science.gov (United States)

Paz-y-Miño-C, Guillermo; Espinosa, Avelina

2016-01-01

The incompatibility between science and the belief in supernatural causation helps us understand why people do not accept evolution. Belief disrupts, distorts, delays, or stops (3Ds + S) the acceptance of scientific evidence. Here we examine the evolution controversy under three predictions of the incompatibility hypothesis. First, chronological-conflict-and-accommodation, which explains the historical re-emergence of antagonism between evolution and religion when advances in science continue to threaten the belief in supernatural causation; in such situations, creationists’ rejection of and subsequent partial acceptance of the new scientific discoveries are expected. Second, change in evolution's acceptance as function of educational attainment, which explains the positive association between acceptance of evolution and level of education. And third, change in evolution's acceptance as function of religiosity, which explains the negative association between acceptance of evolution and level of religious beliefs. We rely on an ample assessment of the attitudes toward evolution by highly-educated audiences (i.e. research faculty, educators of prospective teachers, and college students in the United States) to characterize the associations among the understanding of science and evolution, personal religious convictions, and conservative ideology. We emphasize that harmonious coexistence between science and religion is illusory. If co-persisting in society, their relationship will fluctuate from moderate to intense antagonism. PMID:26877774

Geometric investigation of a gaming active device

Science.gov (United States)

Menna, Fabio; Remondino, Fabio; Battisti, Roberto; Nocerino, Erica

2011-07-01

3D imaging systems are widely available and used for surveying, modeling and entertainment applications, but clear statements regarding their characteristics, performances and limitations are still missing. The VDI/VDE and the ASTME57 committees are trying to set some standards but the commercial market is not reacting properly. Since many new users are approaching these 3D recording methodologies, clear statements and information clarifying if a package or system satisfies certain requirements before investing are fundamental for those users who are not really familiar with these technologies. Recently small and portable consumer-grade active sensors came on the market, like TOF rangeimaging cameras or low-cost triangulation-based range sensor. A quite interesting active system was produced by PrimeSense and launched on the market thanks to the Microsoft Xbox project with the name of Kinect. The article reports the geometric investigation of the Kinect active sensors, considering its measurement performances, the accuracy of the retrieved range data and the possibility to use it for 3D modeling application.

Geometric U-folds in four dimensions

Science.gov (United States)

Lazaroiu, C. I.; Shahbazi, C. S.

2018-01-01

We describe a general construction of geometric U-folds compatible with a non-trivial extension of the global formulation of four-dimensional extended supergravity on a differentiable spin manifold. The topology of geometric U-folds depends on certain flat fiber bundles which encode how supergravity fields are globally glued together. We show that smooth non-trivial U-folds of this type can exist only in theories where both the scalar and space-time manifolds have non-trivial fundamental group and in addition the scalar map of the solution is homotopically non-trivial. Consistency with string theory requires smooth geometric U-folds to be glued using subgroups of the effective discrete U-duality group, implying that the fundamental group of the scalar manifold of such solutions must be a subgroup of the latter. We construct simple examples of geometric U-folds in a generalization of the axion-dilaton model of \

Forward error correction based on algebraic-geometric theory

CERN Document Server

A Alzubi, Jafar; M Chen, Thomas

2014-01-01

This book covers the design, construction, and implementation of algebraic-geometric codes from Hermitian curves. Matlab simulations of algebraic-geometric codes and Reed-Solomon codes compare their bit error rate using different modulation schemes over additive white Gaussian noise channel model. Simulation results of Algebraic-geometric codes bit error rate performance using quadrature amplitude modulation (16QAM and 64QAM) are presented for the first time and shown to outperform Reed-Solomon codes at various code rates and channel models. The book proposes algebraic-geometric block turbo codes. It also presents simulation results that show an improved bit error rate performance at the cost of high system complexity due to using algebraic-geometric codes and Chase-Pyndiah’s algorithm simultaneously. The book proposes algebraic-geometric irregular block turbo codes (AG-IBTC) to reduce system complexity. Simulation results for AG-IBTCs are presented for the first time.

What's in a Name? Interlocutors dynamically update expectations about shared names

Directory of Open Access Journals (Sweden)

Whitney Marie Gegg-Harrison

2016-02-01

Full Text Available In order to refer using a name, speakers must know that their addressee knows about the link between the name and the intended referent. In cases where speakers and addressees learned names together, speakers are adept at using names only when their addressee knows them. But speakers do not always share such learning experience with their conversational partners. In these situations, what information guides speakers’ choice of referring expression? A speaker who is uncertain about a names’ common ground (CG status often uses a name and description together. This N+D form allows speakers to demonstrate knowledge of a name, and could provide, even in the absence of miscommunication, useful evidence to the addressee regarding the speaker’s knowledge. In cases where knowledge of one name is associated with knowledge of other names, could provide indirect evidence regarding knowledge of other names that could support generalizations used to update beliefs about CG. Using data explanation approaches to language processing as a guiding framework, we predict that interlocutors can use their partner’s choice of referring expression, in particular their use of an N+D form, to generate more accurate beliefs regarding their partner’s knowledge of other names. In Experiment 1, we find that domain experts are able to use their partner’s referring expression choices to generate more accurate estimates of CG. In Experiment 2, we find that interlocutors are able to infer from a partner’s use of an N+D form which other names that partner is likely to know or not know. Our results suggest that interlocutors can use the information conveyed in their partner’s choice of referring expression to make generalizations that contribute to more accurate beliefs about what is shared with their partner, and further, that models of CG for reference need to account not just for the status of referents, but the status of means of referring to those referents.

Refined geometric transition and qq-characters

Science.gov (United States)

Kimura, Taro; Mori, Hironori; Sugimoto, Yuji

2018-01-01

We show the refinement of the prescription for the geometric transition in the refined topological string theory and, as its application, discuss a possibility to describe qq-characters from the string theory point of view. Though the suggested way to operate the refined geometric transition has passed through several checks, it is additionally found in this paper that the presence of the preferred direction brings a nontrivial effect. We provide the modified formula involving this point. We then apply our prescription of the refined geometric transition to proposing the stringy description of doubly quantized Seiberg-Witten curves called qq-characters in certain cases.

The perception of geometrical structure from congruence

Science.gov (United States)

Lappin, Joseph S.; Wason, Thomas D.

1989-01-01

The principle function of vision is to measure the environment. As demonstrated by the coordination of motor actions with the positions and trajectories of moving objects in cluttered environments and by rapid recognition of solid objects in varying contexts from changing perspectives, vision provides real-time information about the geometrical structure and location of environmental objects and events. The geometric information provided by 2-D spatial displays is examined. It is proposed that the geometry of this information is best understood not within the traditional framework of perspective trigonometry, but in terms of the structure of qualitative relations defined by congruences among intrinsic geometric relations in images of surfaces. The basic concepts of this geometrical theory are outlined.

From the geometric quantization to conformal field theory

International Nuclear Information System (INIS)

Alekseev, A.; Shatashvili, S.

1990-01-01

Investigation of 2d conformal field theory in terms of geometric quantization is given. We quantize the so-called model space of the compact Lie group, Virasoro group and Kac-Moody group. In particular, we give a geometrical interpretation of the Virasoro discrete series and explain that this type of geometric quantization reproduces the chiral part of CFT (minimal models, 2d-gravity, WZNW theory). In the appendix we discuss the relation between classical (constant) r-matrices and this geometrical approach. (orig.)

Enhanced interfacial radiation-induced reaction for improving the interfacial adhesion of incompatible polymer blend PP/BR

International Nuclear Information System (INIS)

Liu Changhai; Yang Huili; Xu Jun

1995-01-01

γ-radiation induced interfacial changes of incompatible polymer isotactic polypropylene (PP) and cis1,4-polybutadiene (BR) blends containing polyfunctional monomer (PFM) triallyl isocyanurate (TAIC) were investigated. The results of the study are as following: PP is incompatible with BR; TAIC is hardly dissolved in both PP and BR; when blended with PP/BR, the concentration of TAIC in the interfacial region is higher than that in dispersion phase of BR or matrix of PP. The crosslinking and/or grafting of which TAIC occurred under radiation in the interfacial region anchored the dispersed BR phase to PP matrix. The interaction between adjacent phases is changed from sole van der Waals force to co-action of both chemical bond and molecular forces. Crosslinking between adjacent phases links the dispersed phase with PP matrix, and grafting in the boundary regions increases the thickness of interface. These result in a good interfacial adhesion between dispersed phase and matrix. (author)

Geometric inequalities methods of proving

CERN Document Server

Sedrakyan, Hayk

2017-01-01

This unique collection of new and classical problems provides full coverage of geometric inequalities. Many of the 1,000 exercises are presented with detailed author-prepared-solutions, developing creativity and an arsenal of new approaches for solving mathematical problems. This book can serve teachers, high-school students, and mathematical competitors. It may also be used as supplemental reading, providing readers with new and classical methods for proving geometric inequalities. .

Names of Southern African grasses: Name changes and additional ...

African Journals Online (AJOL)

The main reasons for changes in botanical names are briefly reviewed, with examples from the lists. At this time, about 1040 grass species and subspecific taxa are recognized in the subcontinent. Keywords: botanical research; botanical research institute; botany; grass; grasses; identification; name change; nomenclature; ...

Localizing semantic interference from distractor sounds in picture naming: A dual-task study.

Science.gov (United States)

Mädebach, Andreas; Kieseler, Marie-Luise; Jescheniak, Jörg D

2017-10-13

In this study we explored the locus of semantic interference in a novel picture-sound interference task in which participants name pictures while ignoring environmental distractor sounds. In a previous study using this task (Mädebach, Wöhner, Kieseler, & Jescheniak, in Journal of Experimental Psychology: Human Perception and Performance, 43, 1629-1646, 2017), we showed that semantically related distractor sounds (e.g., BARKING dog ) interfere with a picture-naming response (e.g., "horse") more strongly than unrelated distractor sounds do (e.g., DRUMMING drum ). In the experiment reported here, we employed the psychological refractory period (PRP) approach to explore the locus of this effect. We combined a geometric form classification task (square vs. circle; Task 1) with the picture-sound interference task (Task 2). The stimulus onset asynchrony (SOA) between the tasks was systematically varied (0 vs. 500 ms). There were three central findings. First, the semantic interference effect from distractor sounds was replicated. Second, picture naming (in Task 2) was slower with the short than with the long task SOA. Third, both effects were additive-that is, the semantic interference effects were of similar magnitude at both task SOAs. This suggests that the interference arises during response selection or later stages, not during early perceptual processing. This finding corroborates the theory that semantic interference from distractor sounds reflects a competitive selection mechanism in word production.

Geometric group theory an introduction

CERN Document Server

Löh, Clara

2017-01-01

Inspired by classical geometry, geometric group theory has in turn provided a variety of applications to geometry, topology, group theory, number theory and graph theory. This carefully written textbook provides a rigorous introduction to this rapidly evolving field whose methods have proven to be powerful tools in neighbouring fields such as geometric topology. Geometric group theory is the study of finitely generated groups via the geometry of their associated Cayley graphs. It turns out that the essence of the geometry of such groups is captured in the key notion of quasi-isometry, a large-scale version of isometry whose invariants include growth types, curvature conditions, boundary constructions, and amenability. This book covers the foundations of quasi-geometry of groups at an advanced undergraduate level. The subject is illustrated by many elementary examples, outlooks on applications, as well as an extensive collection of exercises.

Geometric procedures for civil engineers

CERN Document Server

Tonias, Elias C

2016-01-01

This book provides a multitude of geometric constructions usually encountered in civil engineering and surveying practice.  A detailed geometric solution is provided to each construction as well as a step-by-step set of programming instructions for incorporation into a computing system. The volume is comprised of 12 chapters and appendices that may be grouped in three major parts: the first is intended for those who love geometry for its own sake and its evolution through the ages, in general, and, more specifically, with the introduction of the computer. The second section addresses geometric features used in the book and provides support procedures used by the constructions presented. The remaining chapters and the appendices contain the various constructions. The volume is ideal for engineering practitioners in civil and construction engineering and allied areas.

5th Dagstuhl Seminar on Geometric Modelling

CERN Document Server

Brunnett, Guido; Farin, Gerald; Goldman, Ron

2004-01-01

In 19 articles presented by leading experts in the field of geometric modelling the state-of-the-art on representing, modeling, and analyzing curves, surfaces as well as other 3-dimensional geometry is given. The range of applications include CAD/CAM-systems, computer graphics, scientific visualization, virtual reality, simulation and medical imaging. The content of this book is based on selected lectures given at a workshop held at IBFI Schloss Dagstuhl, Germany. Topics treated are: – curve and surface modelling – non-manifold modelling in CAD – multiresolution analysis of complex geometric models – surface reconstruction – variational design – computational geometry of curves and surfaces – 3D meshing – geometric modelling for scientific visualization – geometric models for biomedical applications

Geometrical scaling, furry branching and minijets

International Nuclear Information System (INIS)

Hwa, R.C.

1988-01-01

Scaling properties and their violations in hadronic collisions are discussed in the framework of the geometrical branching model. Geometrical scaling supplemented by Furry branching characterizes the soft component, while the production of jets specifies the hard component. Many features of multiparticle production processes are well described by this model. 21 refs

Geometric morphometrics in primatology: craniofacial variation in Homo sapiens and Pan troglodytes.

Science.gov (United States)

Lynch, J M; Wood, C G; Luboga, S A

1996-01-01

Traditionally, morphometric studies have relied on statistical analysis of distances, angles or ratios to investigate morphometric variation among taxa. Recently, geometric techniques have been developed for the direct analysis of landmark data. In this paper, we offer a summary (with examples) of three of these newer techniques, namely shape coordinate, thin-plate spline and relative warp analyses. Shape coordinate analysis detected significant craniofacial variation between 4 modern human populations, with African and Australian Aboriginal specimens being relatively prognathous compared with their Eurasian counterparts. In addition, the Australian specimens exhibited greater basicranial flexion than all other samples. The observed relationships between size and craniofacial shape were weak. The decomposition of shape variation into affine and non-affine components is illustrated via a thin-plate spline analysis of Homo and Pan cranial landmarks. We note differences between Homo and Pan in the degree of prognathism and basicranial flexion and the position and orientation of the foramen magnum. We compare these results with previous studies of these features in higher primates and discuss the utility of geometric morphometrics as a tool in primatology and physical anthropology. We conclude that many studies of morphological variation, both within and between taxa, would benefit from the graphical nature of these techniques.

On Approximation of Hyper-geometric Function Values of a Special Class

Directory of Open Access Journals (Sweden)

P. L. Ivankov

2017-01-01

Full Text Available Investigations of arithmetic properties of the hyper-geometric function values make it possible to single out two trends, namely, Siegel’s method and methods based on the effective construction of a linear approximating form. There are also methods combining both approaches mentioned.  The Siegel’s method allows obtaining the most general results concerning the abovementioned problems. In many cases it was used to establish the algebraic independence of the values of corresponding functions. Although the effective methods do not allow obtaining propositions of such generality they have nevertheless some advantages. Among these advantages one can distinguish at least two: a higher precision of the quantitative results obtained by effective methods and a possibility to study the hyper-geometric functions with irrational parameters.In this paper we apply the effective construction to estimate a measure of the linear independence of the hyper-geometric function values over the imaginary quadratic field. The functions themselves were chosen by a special way so that it could be possible to demonstrate a new approach to the effective construction of a linear approximating form. This approach makes it possible also to extend the well-known effective construction methods of the linear approximating forms for poly-logarithms to the functions of more general type.To obtain the arithmetic result we had to establish a linear independence of the functions under consideration over the field of rational functions. It is apparently impossible to apply directly known theorems containing sufficient (and in some cases needful and sufficient conditions for the system of functions appearing in the theorems mentioned. For this reason, a special technique has been developed to solve this problem.The paper presents the obtained arithmetic results concerning the values of integral functions, but, with appropriate alterations, the theorems proved can be adapted to

Linkage disequilibrium between incompatibility locus region genes in the plant Arabidopsis lyrata

DEFF Research Database (Denmark)

Hagenblad, Jenny; Bechsgaard, Jesper Smærup; Charlesworth, Deborah

2006-01-01

to the incompatibility locus, one being a pseudogene. We determined the phase of multiple haplotypes in families of plants from Icelandic and other populations. Different Aly8 sequence types are associated with different SRK alleles, while haplotypes with the same SRK sequences tend to have the same Aly8 sequence...... the evolutionary history of these populations. Overall, the results suggest that recombination rarely occurs in the interval between the S-loci and Aly8 and that linkage to the S-loci can probably account for the observed high Aly8 diversity....

Postzygotic incompatibilities between the pupfishes, Cyprinodon elegans and Cyprinodon variegatus: hybrid male sterility and sex ratio bias.

Science.gov (United States)

Tech, C

2006-11-01

I examined the intrinsic postzygotic incompatibilities between two pupfishes, Cyprinodon elegans and Cyprinodon variegatus. Laboratory hybridization experiments revealed evidence of strong postzygotic isolation. Male hybrids have very low fertility, and the survival of backcrosses into C. elegans was substantially reduced. In addition, several crosses produced female-biased sex ratios. Crosses involving C. elegans females and C. variegatus males produced only females, and in backcrosses involving hybrid females and C. elegans males, males made up approximately 25% of the offspring. All other crosses produced approximately 50% males. These sex ratios could be explained by genetic incompatibilities that occur, at least in part, on sex chromosomes. Thus, these results provide strong albeit indirect evidence that pupfish have XY chromosomal sex determination. The results of this study provide insight on the evolution of reproductive isolating mechanisms, particularly the role of Haldane's rule and the 'faster-male' theory in taxa lacking well-differentiated sex chromosomes.

Geometric integrator for simulations in the canonical ensemble

Energy Technology Data Exchange (ETDEWEB)

Tapias, Diego, E-mail: diego.tapias@nucleares.unam.mx [Departamento de Física, Facultad de Ciencias, Universidad Nacional Autónoma de México, Ciudad Universitaria, Ciudad de México 04510 (Mexico); Sanders, David P., E-mail: dpsanders@ciencias.unam.mx [Departamento de Física, Facultad de Ciencias, Universidad Nacional Autónoma de México, Ciudad Universitaria, Ciudad de México 04510 (Mexico); Computer Science and Artificial Intelligence Laboratory, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139 (United States); Bravetti, Alessandro, E-mail: alessandro.bravetti@iimas.unam.mx [Instituto de Investigaciones en Matemáticas Aplicadas y en Sistemas, Universidad Nacional Autónoma de México, Ciudad Universitaria, Ciudad de México 04510 (Mexico)

2016-08-28

We introduce a geometric integrator for molecular dynamics simulations of physical systems in the canonical ensemble that preserves the invariant distribution in equations arising from the density dynamics algorithm, with any possible type of thermostat. Our integrator thus constitutes a unified framework that allows the study and comparison of different thermostats and of their influence on the equilibrium and non-equilibrium (thermo-)dynamic properties of a system. To show the validity and the generality of the integrator, we implement it with a second-order, time-reversible method and apply it to the simulation of a Lennard-Jones system with three different thermostats, obtaining good conservation of the geometrical properties and recovering the expected thermodynamic results. Moreover, to show the advantage of our geometric integrator over a non-geometric one, we compare the results with those obtained by using the non-geometric Gear integrator, which is frequently used to perform simulations in the canonical ensemble. The non-geometric integrator induces a drift in the invariant quantity, while our integrator has no such drift, thus ensuring that the system is effectively sampling the correct ensemble.

Geometric integrator for simulations in the canonical ensemble

International Nuclear Information System (INIS)

Tapias, Diego; Sanders, David P.; Bravetti, Alessandro

2016-01-01

We introduce a geometric integrator for molecular dynamics simulations of physical systems in the canonical ensemble that preserves the invariant distribution in equations arising from the density dynamics algorithm, with any possible type of thermostat. Our integrator thus constitutes a unified framework that allows the study and comparison of different thermostats and of their influence on the equilibrium and non-equilibrium (thermo-)dynamic properties of a system. To show the validity and the generality of the integrator, we implement it with a second-order, time-reversible method and apply it to the simulation of a Lennard-Jones system with three different thermostats, obtaining good conservation of the geometrical properties and recovering the expected thermodynamic results. Moreover, to show the advantage of our geometric integrator over a non-geometric one, we compare the results with those obtained by using the non-geometric Gear integrator, which is frequently used to perform simulations in the canonical ensemble. The non-geometric integrator induces a drift in the invariant quantity, while our integrator has no such drift, thus ensuring that the system is effectively sampling the correct ensemble.

Post-boosting of classification boundary for imbalanced data using geometric mean.

Science.gov (United States)

Du, Jie; Vong, Chi-Man; Pun, Chi-Man; Wong, Pak-Kin; Ip, Weng-Fai

2017-12-01

In this paper, a novel imbalance learning method for binary classes is proposed, named as Post-Boosting of classification boundary for Imbalanced data (PBI), which can significantly improve the performance of any trained neural networks (NN) classification boundary. The procedure of PBI simply consists of two steps: an (imbalanced) NN learning method is first applied to produce a classification boundary, which is then adjusted by PBI under the geometric mean (G-mean). For data imbalance, the geometric mean of the accuracies of both minority and majority classes is considered, that is statistically more suitable than the common metric accuracy. PBI also has the following advantages over traditional imbalance methods: (i) PBI can significantly improve the classification accuracy on minority class while improving or keeping that on majority class as well; (ii) PBI is suitable for large data even with high imbalance ratio (up to 0.001). For evaluation of (i), a new metric called Majority loss/Minority advance ratio (MMR) is proposed that evaluates the loss ratio of majority class to minority class. Experiments have been conducted for PBI and several imbalance learning methods over benchmark datasets of different sizes, different imbalance ratios, and different dimensionalities. By analyzing the experimental results, PBI is shown to outperform other imbalance learning methods on almost all datasets. Copyright © 2017 Elsevier Ltd. All rights reserved.

Distribution of Chinese names

Science.gov (United States)

Huang, Ding-wei

2013-03-01

We present a statistical model for the distribution of Chinese names. Both family names and given names are studied on the same basis. With naive expectation, the distribution of family names can be very different from that of given names. One is affected mostly by genealogy, while the other can be dominated by cultural effects. However, we find that both distributions can be well described by the same model. Various scaling behaviors can be understood as a result of stochastic processes. The exponents of different power-law distributions are controlled by a single parameter. We also comment on the significance of full-name repetition in Chinese population.

Unraveling incompatibility between wheat and the fungal pathogen Zymoseptoria tritici through apoplastic proteomics.

Science.gov (United States)

Yang, Fen; Li, Wanshun; Derbyshire, Mark; Larsen, Martin R; Rudd, Jason J; Palmisano, Giuseppe

2015-05-08

Hemibiotrophic fungal pathogen Zymoseptoria tritici causes severe foliar disease in wheat. However, current knowledge of molecular mechanisms involved in plant resistance to Z. tritici and Z. tritici virulence factors is far from being complete. The present work investigated the proteome of leaf apoplastic fluid with emphasis on both host wheat and Z. tritici during the compatible and incompatible interactions. The proteomics analysis revealed rapid host responses to the biotrophic growth, including enhanced carbohydrate metabolism, apoplastic defenses and stress, and cell wall reinforcement, might contribute to resistance. Compatibility between the host and the pathogen was associated with inactivated plant apoplastic responses as well as fungal defenses to oxidative stress and perturbation of plant cell wall during the initial biotrophic stage, followed by the strong induction of plant defenses during the necrotrophic stage. To study the role of anti-oxidative stress in Z. tritici pathogenicity in depth, a YAP1 transcription factor regulating antioxidant expression was deleted and showed the contribution to anti-oxidative stress in Z. tritici, but was not required for pathogenicity. This result suggests the functional redundancy of antioxidants in the fungus. The data demonstrate that incompatibility is probably resulted from the proteome-level activation of host apoplastic defenses as well as fungal incapability to adapt to stress and interfere with host cell at the biotrophic stage of the interaction.

Edge Detection and Feature Line Tracing in 3D-Point Clouds by Analyzing Geometric Properties of Neighborhoods

Directory of Open Access Journals (Sweden)

Huan Ni

2016-09-01

Full Text Available This paper presents an automated and effective method for detecting 3D edges and tracing feature lines from 3D-point clouds. This method is named Analysis of Geometric Properties of Neighborhoods (AGPN, and it includes two main steps: edge detection and feature line tracing. In the edge detection step, AGPN analyzes geometric properties of each query point’s neighborhood, and then combines RANdom SAmple Consensus (RANSAC and angular gap metric to detect edges. In the feature line tracing step, feature lines are traced by a hybrid method based on region growing and model fitting in the detected edges. Our approach is experimentally validated on complex man-made objects and large-scale urban scenes with millions of points. Comparative studies with state-of-the-art methods demonstrate that our method obtains a promising, reliable, and high performance in detecting edges and tracing feature lines in 3D-point clouds. Moreover, AGPN is insensitive to the point density of the input data.

Geometric phase topology in weak measurement

Science.gov (United States)

Samlan, C. T.; Viswanathan, Nirmal K.

2017-12-01

The geometric phase visualization proposed by Bhandari (R Bhandari 1997 Phys. Rep. 281 1-64) in the ellipticity-ellipse orientation basis of the polarization ellipse of light is implemented to understand the geometric aspects of weak measurement. The weak interaction of a pre-selected state, acheived via spin-Hall effect of light (SHEL), results in a spread in the polarization ellipticity (η) or ellipse orientation (χ) depending on the resulting spatial or angular shift, respectively. The post-selection leads to the projection of the η spread in the complementary χ basis results in the appearance of a geometric phase with helical phase topology in the η - χ parameter space. By representing the weak measurement on the Poincaré sphere and using Jones calculus, the complex weak value and the geometric phase topology are obtained. This deeper understanding of the weak measurement process enabled us to explore the techniques’ capabilities maximally, as demonstrated via SHEL in two examples—external reflection at glass-air interface and transmission through a tilted half-wave plate.

Relationships among North American and Japanese Laetiporus isolates inferred from molecular phylogenetics and single-spore incompatibility reactions

Science.gov (United States)

Mark T. Banik; Daniel L. Lindner; Yuko Ota; Tsutomu Hattori

2010-01-01

Relationships were investigated among North American and Japanese isolates of Laetiporus using phylogenetic analysis of ITS sequences and single-spore isolate incompatibility. Single-spore isolate pairings revealed no significant compatibility between North American and Japanese isolates. ITS analysis revealed 12 clades within the core ...

British Sign Name Customs

Science.gov (United States)

Day, Linda; Sutton-Spence, Rachel

2010-01-01

Research presented here describes the sign names and the customs of name allocation within the British Deaf community. While some aspects of British Sign Language sign names and British Deaf naming customs differ from those in most Western societies, there are many similarities. There are also similarities with other societies outside the more…

In vivo studies of the long-term 51Cr red cell survival of serologically incompatible red cell units

International Nuclear Information System (INIS)

Baldwin, M.L.; Ness, P.M.; Barrasso, C.; Kickler, T.S.; Drew, H.; Tsan, M.F.; Shirey, R.S.

1985-01-01

The long-term survival of serologically incompatible red cell units was measured in five patients with antibodies to high-frequency antigens. Initially, the survival of 1 ml of 51 Cr-labeled incompatible red cells was measured over 1 hour. After demonstrating that the 1-hour survival times were successful (greater than 70%), each patient then received 5 ml of the same 51 Cr-labeled red cells followed by the transfusion of the remainder of the red cell unit. The long-term T 1/2Cr survival for each case was patient 1 (anti-McCa), 15 days; patient 2 (anti-JMH), 12 days; patient 3 (anti-Kna), 31 days; patient 4 (anti-McCa), 12 days; and patient 5 (anti-Hya), 14 days. Each antibody tested in an in vitro homologous macrophage assay showed less than 5 percent phagocytosis. Anti-JMH was the only antibody to react with IgG subclass antisera and was determined to be IgG4. The macrophage assay, IgG subclass testing, and short-term (1 hour, 1 ml) 51 Cr survival studies all indicated that the short-term survival was good. However, only the measurement of long-term survival with transfused units of serologically incompatible red cells was able to determine the actual survival, and clinical significance of the alloantibodies. Determining the actual long-term survival by the method described here can be of importance for patients requiring chronic red cell transfusion

Geometric statistical inference

International Nuclear Information System (INIS)

Periwal, Vipul

1999-01-01

A reparametrization-covariant formulation of the inverse problem of probability is explicitly solved for finite sample sizes. The inferred distribution is explicitly continuous for finite sample size. A geometric solution of the statistical inference problem in higher dimensions is outlined

Quantitative and microscopic assessment of compatible and incompatible interactions between chickpea cultivars and Fusarium oxysporum f. sp. ciceris races.

Science.gov (United States)

Jiménez-Fernández, Daniel; Landa, Blanca B; Kang, Seogchan; Jiménez-Díaz, Rafael M; Navas-Cortés, Juan A

2013-01-01

Fusarium wilt caused by Fusarium oxysporum f. sp. ciceris, a main threat to global chickpea production, is managed mainly by resistant cultivars whose efficiency is curtailed by Fusarium oxysporum f. sp. ciceris races. We characterized compatible and incompatible interactions by assessing the spatial-temporal pattern of infection and colonization of chickpea cvs. P-2245, JG-62 and WR-315 by Fusarium oxysporum f. sp. ciceris races 0 and 5 labeled with ZsGreen fluorescent protein using confocal laser scanning microscopy. The two races colonized the host root surface in both interactions with preferential colonization of the root apex and subapical root zone. In compatible interactions, the pathogen grew intercellularly in the root cortex, reached the xylem, and progressed upwards in the stem xylem, being the rate and intensity of stem colonization directly related with the degree of compatibility among Fusarium oxysporum f. sp. ciceris races and chickpea cultivars. In incompatible interactions, race 0 invaded and colonized 'JG-62' xylem vessels of root and stem but in 'WR-315', it remained in the intercellular spaces of the root cortex failing to reach the xylem, whereas race 5 progressed up to the hypocotyl. However, all incompatible interactions were asymptomatic. The differential patterns of colonization of chickpea cultivars by Fusarium oxysporum f. sp. ciceris races may be related to the operation of multiple resistance mechanisms.

Quantitative and microscopic assessment of compatible and incompatible interactions between chickpea cultivars and Fusarium oxysporum f. sp. ciceris races.

Directory of Open Access Journals (Sweden)

Daniel Jiménez-Fernández

Full Text Available BACKGROUND: Fusarium wilt caused by Fusarium oxysporum f. sp. ciceris, a main threat to global chickpea production, is managed mainly by resistant cultivars whose efficiency is curtailed by Fusarium oxysporum f. sp. ciceris races. METHODOLOGY: We characterized compatible and incompatible interactions by assessing the spatial-temporal pattern of infection and colonization of chickpea cvs. P-2245, JG-62 and WR-315 by Fusarium oxysporum f. sp. ciceris races 0 and 5 labeled with ZsGreen fluorescent protein using confocal laser scanning microscopy. FINDINGS: The two races colonized the host root surface in both interactions with preferential colonization of the root apex and subapical root zone. In compatible interactions, the pathogen grew intercellularly in the root cortex, reached the xylem, and progressed upwards in the stem xylem, being the rate and intensity of stem colonization directly related with the degree of compatibility among Fusarium oxysporum f. sp. ciceris races and chickpea cultivars. In incompatible interactions, race 0 invaded and colonized 'JG-62' xylem vessels of root and stem but in 'WR-315', it remained in the intercellular spaces of the root cortex failing to reach the xylem, whereas race 5 progressed up to the hypocotyl. However, all incompatible interactions were asymptomatic. CONCLUSIONS: The differential patterns of colonization of chickpea cultivars by Fusarium oxysporum f. sp. ciceris races may be related to the operation of multiple resistance mechanisms.

The representations of Lie groups and geometric quantizations

International Nuclear Information System (INIS)

Zhao Qiang

1998-01-01

In this paper we discuss the relation between representations of Lie groups and geometric quantizations. A series of representations of Lie groups are constructed by geometric quantization of coadjoint orbits. Particularly, all representations of compact Lie groups, holomorphic discrete series of representations and spherical representations of reductive Lie groups are constructed by geometric quantizations of elliptic and hyperbolic coadjoint orbits. (orig.)

Nonadiabatic geometrical quantum gates in semiconductor quantum dots

International Nuclear Information System (INIS)

Solinas, Paolo; Zanghi, Nino; Zanardi, Paolo; Rossi, Fausto

2003-01-01

In this paper, we study the implementation of nonadiabatic geometrical quantum gates with in semiconductor quantum dots. Different quantum information enconding (manipulation) schemes exploiting excitonic degrees of freedom are discussed. By means of the Aharanov-Anandan geometrical phase, one can avoid the limitations of adiabatic schemes relying on adiabatic Berry phase; fast geometrical quantum gates can be, in principle, implemented

Identifying and Fostering Higher Levels of Geometric Thinking

Science.gov (United States)

Škrbec, Maja; Cadež, Tatjana Hodnik

2015-01-01

Pierre M. Van Hiele created five levels of geometric thinking. We decided to identify the level of geometric thinking in the students in Slovenia, aged 9 to 11 years. The majority of students (60.7%) are at the transition between the zero (visual) level and the first (descriptive) level of geometric thinking. Nearly a third (31.7%) of students is…

What's in a Name

Science.gov (United States)

Bush, Sarah B.; Albanese, Judith; Karp, Karen S.

2016-01-01

Historically, some baby names have been more popular during a specific time span, whereas other names are considered timeless. The Internet article, "How to Tell Someone's Age When All You Know Is Her Name" (Silver and McCann 2014), describes the phenomenon of the rise and fall of name popularity, which served as a catalyst for the…

Peroxynitrite mediates programmed cell death both in papillar cells and in self-incompatible pollen in the olive (Olea europaea L.)

Science.gov (United States)

Serrano, Irene; Romero-Puertas, María C.; Rodríguez-Serrano, María; Sandalio, Luisa M.; Olmedilla, Adela

2012-01-01

Programmed cell death (PCD) has been found to be induced after pollination both in papillar cells and in self-incompatible pollen in the olive (Olea europaea L.). Reactive oxygen species (ROS) and nitric oxide (NO) are known to be produced in the pistil and pollen during pollination but their contribution to PCD has so far remained elusive. The possible role of ROS and NO was investigated in olive pollen–pistil interaction during free and controlled pollination and it was found that bidirectional interaction appears to exist between the pollen and the stigma, which seems to regulate ROS and NO production. Biochemical evidence strongly suggesting that both O2˙− and NO are essential for triggering PCD in self-incompatibility processes was also obtained. It was observed for the first time that peroxynitrite, a powerful oxidizing and nitrating agent generated during a rapid reaction between O2˙− and NO, is produced during pollination and that this is related to an increase in protein nitration which, in turn, is strongly associated with PCD. It may be concluded that peroxynitrite mediates PCD during pollen–pistil interaction in Olea europaea L. both in self-incompatible pollen and papillar cells. PMID:22140239

Insight into S-RNase-based self-incompatibility in Petunia: recent findings and future directions

Directory of Open Access Journals (Sweden)

Justin S Williams

2015-02-01

Full Text Available S-RNase-based self-incompatibility in Petunia is a self/non-self recognition system that allows the pistil to reject self-pollen to prevent inbreeding and to accept non-self pollen for outcrossing. Cloning of S-RNase in 1986 marked the beginning of nearly three decades of intensive research into the mechanism of this complex system. S-RNase was shown to be the sole female determinant in 1994, and the first male determinant, S-locus F-box protein1 (SLF1, was identified in 2004. It was discovered in 2010 that additional SLF proteins are involved in pollen specificity, and recently two S-haplotypes of P. inflata were found to possess 17 SLF genes based on pollen transcriptome analysis, further increasing the complexity of the system. Here, we first summarize the current understanding of how the interplay between SLF proteins and S-RNase in the pollen tube allows cross-compatible pollination, but results in self-incompatible pollination. We then discuss some of the aspects that are not yet elucidated, including uptake of S-RNase into the pollen tube, nature and assembly of SLF-containing complexes, the biochemical basis for differential interactions between SLF proteins and S-RNase, and fate of non-self S-RNases in the pollen tube.

Auto-incompatibilidade em plantas Self-incompatibility in plants

Directory of Open Access Journals (Sweden)

Maria Teresa Schifino-Wittmann

2002-12-01

Full Text Available A auto-incompatibilidade (AI é a incapacidade de uma planta fértil formar sementes quando fertilizada por seu próprio pólen. É um mecanismo fisiólogico, com base genética, que promove a alogamia, e tem despertado a atenção de geneticistas e melhoristas de plantas. Atualmente, a ênfase nas pesquisas está na identificação e entendimento dos processos moleculares e celulares que levam ao reconhecimento e à rejeição do pólen auto-incompatível, incluindo a identificação, localização e seqüenciamento das proteínas, enzimas e genes envolvidos. Existem dois tipos principais de AI, a gametofítica (AIG, em que a especificidade do pólén é gerada pelo alelo S do genoma haplóide do grão do pólen (gametófito, e a esporofítica (AIE, em que a especificidade é gerada pelo genótipo diplóide da planta adulta (esporófito que deu origem ao grão de pólen. A AIE pode ser homomórfica, quando não existem modificações florais que acompanham o processo, ou heteromórfica, quando, com o processo de AI, ocorrem modificações florais. A reação da AI engloba desde o impedimento da germinação do pólen até o rompimento do tubo polínico. A ocorrência de AI em espécies de interesse econômico pode ter uma importância muito grande, sendo muito positiva em alguns casos e um empecilho em outros, dependendo da parte da planta (vegetativa ou reprodutiva que é colhida e do tipo de reprodução, sexual ou vegetativa. A utilização da AI no melhoramento de plantas é feita há bastante tempo, mas existe uma lacuna entre o grau de detalhamento do conhecimento teórico, como as bases genética e molecular, e a aplicação deste conhecimento no melhoramento.Self-incompatibility (SI is the failure of a fertile plant to set seeds when fertilized with its own pollen. It is a physiological mechanism, with a genetic basis, which promotes allogamy and has drawn geneticists and plant breeders’ attention. Nowadays, the research has put

Riemannian geometry and geometric analysis

CERN Document Server

Jost, Jürgen

2017-01-01

This established reference work continues to provide its readers with a gateway to some of the most interesting developments in contemporary geometry. It offers insight into a wide range of topics, including fundamental concepts of Riemannian geometry, such as geodesics, connections and curvature; the basic models and tools of geometric analysis, such as harmonic functions, forms, mappings, eigenvalues, the Dirac operator and the heat flow method; as well as the most important variational principles of theoretical physics, such as Yang-Mills, Ginzburg-Landau or the nonlinear sigma model of quantum field theory. The present volume connects all these topics in a systematic geometric framework. At the same time, it equips the reader with the working tools of the field and enables her or him to delve into geometric research.  The 7th edition has been systematically reorganized and updated. Almost no page has been left unchanged. It also includes new material, for instance on symplectic geometry, as well as the B...

JEMs and incompatible occupational coding systems: Effect of manual and automatic recoding of job codes on exposure assignment

NARCIS (Netherlands)

Koeman, T.; Offermans, N.S.M.; Christopher-De Vries, Y.; Slottje, P.; Brandt, P.A. van den; Goldbohm, R.A.; Kromhout, H.; Vermeulen, R.

2013-01-01

Background: In epidemiological studies, occupational exposure estimates are often assigned through linkage of job histories to job-exposure matrices (JEMs). However, available JEMs may have a coding system incompatible with the coding system used to code the job histories, necessitating a

Geometric function theory in higher dimension

CERN Document Server

2017-01-01

The book collects the most relevant outcomes from the INdAM Workshop “Geometric Function Theory in Higher Dimension” held in Cortona on September 5-9, 2016. The Workshop was mainly devoted to discussions of basic open problems in the area, and this volume follows the same line. In particular, it offers a selection of original contributions on Loewner theory in one and higher dimensions, semigroups theory, iteration theory and related topics. Written by experts in geometric function theory in one and several complex variables, it focuses on new research frontiers in this area and on challenging open problems. The book is intended for graduate students and researchers working in complex analysis, several complex variables and geometric function theory.

An introduction to geometrical physics

CERN Document Server

Aldrovandi, R

1995-01-01

This book stresses the unifying power of the geometrical framework in bringing together concepts from the different areas of physics. Common underpinnings of optics, elasticity, gravitation, relativistic fields, particle mechanics and other subjects are underlined. It attempts to extricate the notion of space currently in the physical literature from the metric connotation.The book's goal is to present mathematical ideas associated with geometrical physics in a rather introductory language. Included are many examples from elementary physics and also, for those wishing to reach a higher level o

Dictionary of Alaska place names

Science.gov (United States)

Orth, Donald J.

1971-01-01

This work is an alphabetical list of the geographic names that are now applied and have been applied to places and features of the Alaska landscape. Principal names, compiled from modem maps and charts and printed in boldface type, generally reflect present-day local usage. They conform to the principles of the U.S. Board on Geographic Names for establishing standard names for use on Government maps and in other Government publications. Each name entry gives the present-day spelling along with variant spellings and names; identifies the feature named; presents the origin and history of the name; and, where possible, gives the meaning of an Eskimo, Aleut, Indian, or foreign name. Variant, obsolete, and doubtful names are alphabetically listed and are cross referenced, where necessary, to the principal entries.

Geometric leaf placement strategies

International Nuclear Information System (INIS)

Fenwick, J D; Temple, S W P; Clements, R W; Lawrence, G P; Mayles, H M O; Mayles, W P M

2004-01-01

Geometric leaf placement strategies for multileaf collimators (MLCs) typically involve the expansion of the beam's-eye-view contour of a target by a uniform MLC margin, followed by movement of the leaves until some point on each leaf end touches the expanded contour. Film-based dose-distribution measurements have been made to determine appropriate MLC margins-characterized through an index d 90 -for multileaves set using one particular strategy to straight lines lying at various angles to the direction of leaf travel. Simple trigonometric relationships exist between different geometric leaf placement strategies and are used to generalize the results of the film work into d 90 values for several different strategies. Measured d 90 values vary both with angle and leaf placement strategy. A model has been derived that explains and describes quite well the observed variations of d 90 with angle. The d 90 angular variations of the strategies studied differ substantially, and geometric and dosimetric reasoning suggests that the best strategy is the one with the least angular variation. Using this criterion, the best straightforwardly implementable strategy studied is a 'touch circle' approach for which semicircles are imagined to be inscribed within leaf ends, the leaves being moved until the semicircles just touch the expanded target outline

Determination of Geometrical REVs Based on Volumetric Fracture Intensity and Statistical Tests

Directory of Open Access Journals (Sweden)

Ying Liu

2018-05-01

Full Text Available This paper presents a method to estimate a representative element volume (REV of a fractured rock mass based on the volumetric fracture intensity P32 and statistical tests. A 150 m × 80 m × 50 m 3D fracture network model was generated based on field data collected at the Maji dam site by using the rectangular window sampling method. The volumetric fracture intensity P32 of each cube was calculated by varying the cube location in the generated 3D fracture network model and varying the cube side length from 1 to 20 m, and the distribution of the P32 values was described. The size effect and spatial effect of the fractured rock mass were studied; the P32 values from the same cube sizes and different locations were significantly different, and the fluctuation in P32 values clearly decreases as the cube side length increases. In this paper, a new method that comprehensively considers the anisotropy of rock masses, simplicity of calculation and differences between different methods was proposed to estimate the geometrical REV size. The geometrical REV size of the fractured rock mass was determined based on the volumetric fracture intensity P32 and two statistical test methods, namely, the likelihood ratio test and the Wald–Wolfowitz runs test. The results of the two statistical tests were substantially different; critical cube sizes of 13 m and 12 m were estimated by the Wald–Wolfowitz runs test and the likelihood ratio test, respectively. Because the different test methods emphasize different considerations and impact factors, considering a result that these two tests accept, the larger cube size, 13 m, was selected as the geometrical REV size of the fractured rock mass at the Maji dam site in China.

Efficacy of everolimus in ABO-incompatible kidney transplantation: a retrospective study

Directory of Open Access Journals (Sweden)

Tsujimura K

2017-09-01

Full Text Available Kazuma Tsujimura,1 Morihito Ota,1 Kiyoshi Chinen,1 Kiyomitsu Nagayama,2 Masato Oroku,2 Morikuni Nishihira,2 Yoshiki Shiohira,2 Kunitoshi Iseki,3 Hideki Ishida,4 Kazunari Tanabe4 1Department of Surgery, 2Department of Nephrology, 3Clinical Research Support Center, Tomishiro Central Hospital, Okinawa, Japan; 4Department of Urology, Tokyo Women’s Medical University, Tokyo, Japan Background: There are limited reports on the use of everolimus for maintaining immunosuppression in ABO-incompatible (ABOi kidney transplantation (KT. As everolimus (EVR is effective for preventing calcineurin inhibitor (CNI nephrotoxicity without increasing the risk of chronic rejection and viral infection, we aimed to assess the efficacy of EVR in ABOi KT.Patients and methods: We retrospectively studied 22 patients who underwent KT and received EVR. Patients in the ABOi KT group (n=7 were compared with those in the ABO-compatible kidney transplantation group (ABOc KT; n=15. We recorded the frequency of CNI nephrotoxicity, chronic rejection, and viral infection in the 2 groups.Results: CNI nephrotoxicity, chronic rejection, and viral infection occurred in the ABOi KT and ANOc KT groups at rates of 28.3% (2/7 patients and 13.3% (2/15 patients (P=0.388, 28.3% (2/7 patients and 26.7% (4/15 patients (P=0.926, and 14.3% (1/7 patients and 26.7% (4/15 patients (P=0.517, respectively.Conclusion: Administration of EVR is effective in preventing CNI nephrotoxicity after KT. The rate of CNI nephrotoxicity was lower in the ABOc KT group than in the ABOi KT group. The rate of chronic rejection and viral infection was comparable between the groups. This study was conducted in a small cohort of patients. Hence, further evaluation with large sample sizes is necessary in the future to confirm the outcomes. Keywords: blood group incompatibility, immunosuppression, kidney transplantation

Geometric scaling as traveling waves

International Nuclear Information System (INIS)

Munier, S.; Peschanski, R.

2003-01-01

We show the relevance of the nonlinear Fisher and Kolmogorov-Petrovsky-Piscounov (KPP) equation to the problem of high energy evolution of the QCD amplitudes. We explain how the traveling wave solutions of this equation are related to geometric scaling, a phenomenon observed in deep-inelastic scattering experiments. Geometric scaling is for the first time shown to result from an exact solution of nonlinear QCD evolution equations. Using general results on the KPP equation, we compute the velocity of the wave front, which gives the full high energy dependence of the saturation scale

Geometrical spin symmetry and spin

International Nuclear Information System (INIS)

Pestov, I. B.

2011-01-01

Unification of General Theory of Relativity and Quantum Mechanics leads to General Quantum Mechanics which includes into itself spindynamics as a theory of spin phenomena. The key concepts of spindynamics are geometrical spin symmetry and the spin field (space of defining representation of spin symmetry). The essence of spin is the bipolar structure of geometrical spin symmetry induced by the gravitational potential. The bipolar structure provides a natural derivation of the equations of spindynamics. Spindynamics involves all phenomena connected with spin and provides new understanding of the strong interaction.

Asymptotic geometric analysis, part I

CERN Document Server

Artstein-Avidan, Shiri

2015-01-01

The authors present the theory of asymptotic geometric analysis, a field which lies on the border between geometry and functional analysis. In this field, isometric problems that are typical for geometry in low dimensions are substituted by an "isomorphic" point of view, and an asymptotic approach (as dimension tends to infinity) is introduced. Geometry and analysis meet here in a non-trivial way. Basic examples of geometric inequalities in isomorphic form which are encountered in the book are the "isomorphic isoperimetric inequalities" which led to the discovery of the "concentration phenomen

HLA-C incompatibilities in allogeneic unrelated hematopoietic stem cell transplantation

Directory of Open Access Journals (Sweden)

Jean-Marie eTIERCY

2014-05-01

Full Text Available An increasingly larger fraction of patients with hematological diseases are treated by hematopoietic stem cells transplantation (HSCT from HLA matched unrelated donors. Polymorphism of HLA genes represent a major barrier to HSCT because HLA-A,B,C and DRB1 incompatibilities confer a higher risk of aGVHD and mortality. Although >22 million volunteer HLA-typed donors are available worldwide, still a significant number of patients do not find a highly matched HSC donor. Because of the large haplotypic diversity in HLA-B-C associations, incompatibilities occur most frequently at HLA-C, so that unrelated donors with a single HLA-C mismatch often represent the only possible choice. The ratio of HLA-C-mismatched HSCT over the total number of transplants varies from 15-30%, as determined in 12 multicenter studies. Six multicenter studies involving >1800 patients have reported a 21-43% increase in mortality risk. By using in vitro cellular assays a large heterogeneity in T-cell allorecognition has been observed. Yet the permissiveness of individual HLA-C mismatches remains poorly defined. It could be linked to the position and nature of the mismatched residues on HLA-C molecules, but also to variability in the expression levels of the mismatched alleles. The permissive C*03:03-03:04 mismatch is caracterized by full compatibility at residues 9, 97, 99, 116, 152, 156 and 163 reported to be key positions influencing T-cell allorecognition. With a single difference in these key residues the C*07:01-07:02 mismatch might also be considered by analogy as permissive. High variability of HLA-C expression as determined by quantitative RT-PCR has been observed within individual allotypes and shows some correlation with A-B-C-DRB1 haplotypes. Thus in addition to the position of mismatched amino acid residues, expression level of patient’s mismatched HLA-C allotype might influence T-cell allorecognition, with patient's low expression-C alleles representing possible

Directory of awardee names

Energy Technology Data Exchange (ETDEWEB)

1999-07-01

Standardization of grant and contract awardee names has been an area of concern since the development of the Department`s Procurement and Assistance Data System (PADS). A joint effort was begun in 1983 by the Office of Scientific and Technical Information (OSTI) and the Office of Procurement and Assistance Management/Information Systems and Analysis Division to develop a means for providing uniformity of awardee names. As a result of this effort, a method of assigning vendor identification codes to each unique awardee name, division, city, and state combination was developed and is maintained by OSTI. Changes to vendor identification codes or awardee names contained in PADS can be made only by OSTI. Awardee names in the Directory indicate that the awardee has had a prime contract (excluding purchase orders of $10,000 or less) with, or a financial assistance award from, the Department. Award status--active, inactive, or retired--is not shown. The Directory is in alphabetic sequence based on awardee name and reflects the OSTI-assigned vendor identification code to the right of the name. A vendor identification code is assigned to each unique awardee name, division, city, and state (for place of performance). The same vendor identification code is used for awards throughout the Department.

Geometrical analysis of the interacting boson model

International Nuclear Information System (INIS)

Dieperink, A.E.L.

1983-01-01

The Interacting Boson Model is considered, in relation with geometrical models and the application of mean field techniques to algebraic models, in three lectures. In the first, several methods are reviewed to establish a connection between the algebraic formulation of collective nuclear properties in terms of the group SU(6) and the geometric approach. In the second lecture the geometric interpretation of new degrees of freedom that arise in the neutron-proton IBA is discussed, and in the third one some further applications of algebraic techniques to the calculation of static and dynamic collective properties are presented. (U.K.)

A Geometrical View of Higgs Effective Theory

CERN Multimedia

CERN. Geneva

2016-01-01

A geometric formulation of Higgs Effective Field Theory (HEFT) is presented. Experimental observables are given in terms of geometric invariants of the scalar sigma model sector such as the curvature of the scalar field manifold M. We show how the curvature can be measured experimentally via Higgs cross-sections, W_L scattering, and the S parameter. The one-loop action of HEFT is given in terms of geometric invariants of M. The distinction between the Standard Model (SM) and HEFT is whether M is flat or curved, with the curvature a signal of the scale of new physics.

Geometric phases and hidden local gauge symmetry

International Nuclear Information System (INIS)

Fujikawa, Kazuo

2005-01-01

The analysis of geometric phases associated with level crossing is reduced to the familiar diagonalization of the Hamiltonian in the second quantized formulation. A hidden local gauge symmetry, which is associated with the arbitrariness of the phase choice of a complete orthonormal basis set, becomes explicit in this formulation (in particular, in the adiabatic approximation) and specifies physical observables. The choice of a basis set which specifies the coordinate in the functional space is arbitrary in the second quantization, and a subclass of coordinate transformations, which keeps the form of the action invariant, is recognized as the gauge symmetry. We discuss the implications of this hidden local gauge symmetry in detail by analyzing geometric phases for cyclic and noncyclic evolutions. It is shown that the hidden local symmetry provides a basic concept alternative to the notion of holonomy to analyze geometric phases and that the analysis based on the hidden local gauge symmetry leads to results consistent with the general prescription of Pancharatnam. We however note an important difference between the geometric phases for cyclic and noncyclic evolutions. We also explain a basic difference between our hidden local gauge symmetry and a gauge symmetry (or equivalence class) used by Aharonov and Anandan in their definition of generalized geometric phases

Geometric group theory

CERN Document Server

Bestvina, Mladen; Vogtmann, Karen

2014-01-01

Geometric group theory refers to the study of discrete groups using tools from topology, geometry, dynamics and analysis. The field is evolving very rapidly and the present volume provides an introduction to and overview of various topics which have played critical roles in this evolution. The book contains lecture notes from courses given at the Park City Math Institute on Geometric Group Theory. The institute consists of a set of intensive short courses offered by leaders in the field, designed to introduce students to exciting, current research in mathematics. These lectures do not duplicate standard courses available elsewhere. The courses begin at an introductory level suitable for graduate students and lead up to currently active topics of research. The articles in this volume include introductions to CAT(0) cube complexes and groups, to modern small cancellation theory, to isometry groups of general CAT(0) spaces, and a discussion of nilpotent genus in the context of mapping class groups and CAT(0) gro...

Geometric Transformations in Engineering Geometry

Directory of Open Access Journals (Sweden)

I. F. Borovikov

2015-01-01

Full Text Available Recently, for business purposes, in view of current trends and world experience in training engineers, research and faculty staff there has been a need to transform traditional courses of descriptive geometry into the course of engineering geometry in which the geometrical transformations have to become its main section. On the basis of critical analysis the paper gives suggestions to improve a presentation technique of this section both in the classroom and in academic literature, extend an application scope of geometrical transformations to solve the position and metric tasks and simulation of surfaces, as well as to design complex engineering configurations, which meet a number of pre-specified conditions.The article offers to make a number of considerable amendments to the terms and definitions used in the existing courses of descriptive geometry. It draws some conclusions and makes the appropriate proposals on feasibility of coordination in teaching the movement transformation in the courses of analytical and descriptive geometry. This will provide interdisciplinary team teaching and allow students to be convinced that a combination of analytical and graphic ways to solve geometric tasks is useful and reasonable.The traditional sections of learning courses need to be added with a theory of projective and bi-rational transformations. In terms of application simplicity and convenience it is enough to consider the central transformations when solving the applied tasks. These transformations contain a beam of sub-invariant (low-invariant straight lines on which the invariant curve induces non-involution and involution projectivities. The expediency of nonlinear transformations application is shown in the article by a specific example of geometric modeling of the interfacing surface "spar-blade".Implementation of these suggestions will contribute to a real transformation of a traditional course of descriptive geometry to the engineering geometry

The number of self-incompatibility alleles in a finite, subdivided population

DEFF Research Database (Denmark)

Schierup, M H

1998-01-01

The actual and effective number of gametophytic self-incompatibility alleles maintained at mutation-drift-selection equilibrium in a finite population subdivided as in the island model is investigated by stochastic simulations. The existing theory founded by Wright predicts that for a given...... population size the number of alleles maintained increases monotonically with decreasing migration as is the case for neutral alleles. The simulation results here show that this is not true. At migration rates above Nm = 0.01-0.1, the actual and effective number of alleles is lower than for an undivided...... of individuals in the population but it underestimates the neutral effective size of the subdivided population. Udgivelsesdato: 1998-Jun...

Automated red blood cell depletion in ABO incompatible grafts in the pediatric setting.

Science.gov (United States)

Del Fante, Claudia; Scudeller, Luigia; Recupero, Santina; Viarengo, Gianluca; Boghen, Stella; Gurrado, Antonella; Zecca, Marco; Seghatchian, Jerard; Perotti, Cesare

2017-12-01

Bone marrow ABO incompatible transplantations require graft manipulation prior to infusion to avoid potentially lethal side effects. We analyzed the influence of pre-manipulation factors (temperature at arrival, transit time, time of storage at 4°C until processing and total time from collection to red blood cell depletion) on the graft quality of 21 red blood cell depletion procedures in ABO incompatible pediatric transplants. Bone marrow collections were processed using the Spectra Optia ® (Terumo BCT) automated device. Temperature at arrival ranged between 4°C and 6°C, median transit time was 9.75h (range 0.33-28), median time of storage at 4°-6°C until processing was 1.8h (range 0.41-18.41) and median time from collection to RBC depletion was 21h (range1-39.4). Median percentage of red blood cell depletion was 97.7 (range 95.4-98.5), median mononuclear cells recovery was 92.2% (range 40-121.2), median CD34+ cell recovery was 93% (range 69.9-161.2), median cell viability was 97.7% (range 94-99.3) and median volume reduction was 83.9% (range 82-92). Graft quality was not significantly different between BM units median age. Our preliminary data show that when all good manifacturing practices are respected the post-manipulation graft quality is excellent also for those units processed after 24h. Copyright © 2017 Elsevier Ltd. All rights reserved.

Non-Markovian effect on the geometric phase of a dissipative qubit

International Nuclear Information System (INIS)

Chen Juanjuan; Tong Qingjun; An Junhong; Luo Honggang; Oh, C. H.

2010-01-01

We studied the geometric phase of a two-level atom coupled to an environment with Lorentzian spectral density. The non-Markovian effect on the geometric phase is explored analytically and numerically. In the weak coupling limit, the lowest order correction to the geometric phase is derived analytically and the general case is calculated numerically. It was found that the correction to the geometric phase is significantly large if the spectral width is small, and in this case the non-Markovian dynamics has a significant impact on the geometric phase. When the spectral width increases, the correction to the geometric phase becomes negligible, which shows the robustness of the geometric phase to the environmental white noises. The result is significant to the quantum information processing based on the geometric phase.

Some Hermite–Hadamard Type Inequalities for Geometrically Quasi ...

Indian Academy of Sciences (India)

Abstract. In the paper, we introduce a new concept 'geometrically quasi-convex function' and establish some Hermite–Hadamard type inequalities for functions whose derivatives are of geometric quasi-convexity.

Marine Place Names

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the geographic place names for features in the U.S territorial waters and outer continental shelf. These names can be used to find or define a...

By which name should I call thee? The consequences of having multiple names.

Science.gov (United States)

Stevenage, Sarah V; Lewis, Hugh G

2005-11-01

The nominal competitor effect suggests that, when a person has two names associated with them, recall of either name is more difficult than if they just had one name. Drawing on a connectionist framework, this effect could arise either if multiple names were represented as being connected to a single person identity node (PIN), or if multiple names were represented as being connected via one-to-one links to multiple PINs. Whilst the latter has intuitive appeal, results from two experiments support the former architecture. Having two names connected to a single PIN not only gives rise to a nominal competitor effect (Experiment 1), but also gives rise to a familiarity enhancement effect (Experiment 2). These empirical results are simulated using an extension of Brédart, Valentine, Calder, and Gassi's (1995) connectionist architecture, which reveals that both effects hold even when the association of both names to the PIN is unequal. These results are presented in terms of a more complete model for person recognition, and the representation of semantic information within such a model is examined.

Geometric Hypergraph Learning for Visual Tracking

OpenAIRE

Du, Dawei; Qi, Honggang; Wen, Longyin; Tian, Qi; Huang, Qingming; Lyu, Siwei

2016-01-01

Graph based representation is widely used in visual tracking field by finding correct correspondences between target parts in consecutive frames. However, most graph based trackers consider pairwise geometric relations between local parts. They do not make full use of the target's intrinsic structure, thereby making the representation easily disturbed by errors in pairwise affinities when large deformation and occlusion occur. In this paper, we propose a geometric hypergraph learning based tr...

Sparse geometric graphs with small dilation

NARCIS (Netherlands)

Aronov, B.; Berg, de M.; Cheong, O.; Gudmundsson, J.; Haverkort, H.J.; Vigneron, A.; Deng, X.; Du, D.

2005-01-01

Given a set S of n points in the plane, and an integer k such that 0 = k geometric graph with vertex set S, at most n – 1 + k edges, and dilation O(n / (k + 1)) can be computed in time O(n log n). We also construct n–point sets for which any geometric graph with n – 1 + k edges

Geometric ghosts and unitarity

International Nuclear Information System (INIS)

Ne'eman, Y.

1980-09-01

A review is given of the geometrical identification of the renormalization ghosts and the resulting derivation of Unitarity equations (BRST) for various gauges: Yang-Mills, Kalb-Ramond, and Soft-Group-Manifold

A Color Image Watermarking Scheme Resistant against Geometrical Attacks

Directory of Open Access Journals (Sweden)

Y. Xing

2010-04-01

Full Text Available The geometrical attacks are still a problem for many digital watermarking algorithms at present. In this paper, we propose a watermarking algorithm for color images resistant to geometrical distortions (rotation and scaling. The singular value decomposition is used for watermark embedding and extraction. The log-polar map- ping (LPM and phase correlation method are used to register the position of geometrical distortion suffered by the watermarked image. Experiments with different kinds of color images and watermarks demonstrate that the watermarking algorithm is robust to common image processing attacks, especially geometrical attacks.

Solving Absolute Value Equations Algebraically and Geometrically

Science.gov (United States)

Shiyuan, Wei

2005-01-01

The way in which students can improve their comprehension by understanding the geometrical meaning of algebraic equations or solving algebraic equation geometrically is described. Students can experiment with the conditions of the absolute value equation presented, for an interesting way to form an overall understanding of the concept.

Quasirandom geometric networks from low-discrepancy sequences

Science.gov (United States)

Estrada, Ernesto

2017-08-01

We define quasirandom geometric networks using low-discrepancy sequences, such as Halton, Sobol, and Niederreiter. The networks are built in d dimensions by considering the d -tuples of digits generated by these sequences as the coordinates of the vertices of the networks in a d -dimensional Id unit hypercube. Then, two vertices are connected by an edge if they are at a distance smaller than a connection radius. We investigate computationally 11 network-theoretic properties of two-dimensional quasirandom networks and compare them with analogous random geometric networks. We also study their degree distribution and their spectral density distributions. We conclude from this intensive computational study that in terms of the uniformity of the distribution of the vertices in the unit square, the quasirandom networks look more random than the random geometric networks. We include an analysis of potential strategies for generating higher-dimensional quasirandom networks, where it is know that some of the low-discrepancy sequences are highly correlated. In this respect, we conclude that up to dimension 20, the use of scrambling, skipping and leaping strategies generate quasirandom networks with the desired properties of uniformity. Finally, we consider a diffusive process taking place on the nodes and edges of the quasirandom and random geometric graphs. We show that the diffusion time is shorter in the quasirandom graphs as a consequence of their larger structural homogeneity. In the random geometric graphs the diffusion produces clusters of concentration that make the process more slow. Such clusters are a direct consequence of the heterogeneous and irregular distribution of the nodes in the unit square in which the generation of random geometric graphs is based on.

Morphological Characteristics and Somatic Incompatibility of Ganoderma from Infected Oil Palm from Three Inland Estates

Directory of Open Access Journals (Sweden)

Latiffah, Z.

2005-01-01

Full Text Available The morphological characteristics of Ganoderma basidiomata from infected oil palms from three inland estates showed some variations, but all fall within the description of G. boninense, based on Steyaert s classification system (1967, 1975. Pairings of G. boninense isolates from the same estate showed that there was somatic incompatibility among the isolates which indicated that the isolates were distinct individuals and not clones of single genotypes.

Geometric convergence of some two-point Pade approximations

International Nuclear Information System (INIS)

Nemeth, G.

1983-01-01

The geometric convergences of some two-point Pade approximations are investigated on the real positive axis and on certain infinite sets of the complex plane. Some theorems concerning the geometric convergence of Pade approximations are proved, and bounds on geometric convergence rates are given. The results may be interesting considering the applications both in numerical computations and in approximation theory. As a specific case, the numerical calculations connected with the plasma dispersion function may be performed. (D.Gy.)

Naming as Strategic Communication

DEFF Research Database (Denmark)

Schmeltz, Line; Kjeldsen, Anna Karina

2016-01-01

This article presents a framework for understanding corporate name change as strategic communication. From a corporate branding perspective, the choice of a new name can be seen as a wish to stand out from a group of similar organizations. Conversely, from an institutional perspective, name change...

Geometric quantization and general relativity

International Nuclear Information System (INIS)

Souriau, J.-M.

1977-01-01

The purpose of geometric quantization is to give a rigorous mathematical content to the 'correspondence principle' between classical and quantum mechanics. The main tools are borrowed on one hand from differential geometry and topology (differential manifolds, differential forms, fiber bundles, homology and cohomology, homotopy), on the other hand from analysis (functions of positive type, infinite dimensional group representations, pseudo-differential operators). Some satisfactory results have been obtained in the study of dynamical systems, but some fundamental questions are still waiting for an answer. The 'geometric quantization of fields', where some further well known difficulties arise, is still in a preliminary stage. In particular, the geometric quantization on the gravitational field is still a mere project. The situation is even more uncertain due to the fact that there is no experimental evidence of any quantum gravitational effect which could give us a hint towards what we are supposed to look for. The first level of both Quantum Theory, and General Relativity describes passive matter: influence by the field without being a source of it (first quantization and equivalence principle respectively). In both cases this is only an approximation (matter is always a source). But this approximation turns out to be the least uncertain part of the description, because on one hand the first quantization avoids the problems of renormalization and on the other hand the equivalence principle does not imply any choice of field equations (it is known that one can modify Einstein equations at short distances without changing their geometrical properties). (Auth.)

Auto-focusing accelerating hyper-geometric laser beams

International Nuclear Information System (INIS)

Kovalev, A A; Kotlyar, V V; Porfirev, A P

2016-01-01

We derive a new solution to the paraxial wave equation that defines a two-parameter family of three-dimensional structurally stable vortex annular auto-focusing hyper-geometric (AH) beams, with their complex amplitude expressed via a degenerate hyper-geometric function. The AH beams are found to carry an orbital angular momentum and be auto-focusing, propagating on an accelerating path toward a focus, where the annular intensity pattern is ‘sharply’ reduced in diameter. An explicit expression for the complex amplitude of vortex annular auto-focusing hyper-geometric-Gaussian beams is derived. The experiment has been shown to be in good agreement with theory. (paper)

What's in a Name? Sound Symbolism and Gender in First Names.

Directory of Open Access Journals (Sweden)

David M Sidhu

Full Text Available Although the arbitrariness of language has been considered one of its defining features, studies have demonstrated that certain phonemes tend to be associated with certain kinds of meaning. A well-known example is the Bouba/Kiki effect, in which nonwords like bouba are associated with round shapes while nonwords like kiki are associated with sharp shapes. These sound symbolic associations have thus far been limited to nonwords. Here we tested whether or not the Bouba/Kiki effect extends to existing lexical stimuli; in particular, real first names. We found that the roundness/sharpness of the phonemes in first names impacted whether the names were associated with round or sharp shapes in the form of character silhouettes (Experiments 1a and 1b. We also observed an association between femaleness and round shapes, and maleness and sharp shapes. We next investigated whether this association would extend to the features of language and found the proportion of round-sounding phonemes was related to name gender (Analysis of Category Norms. Finally, we investigated whether sound symbolic associations for first names would be observed for other abstract properties; in particular, personality traits (Experiment 2. We found that adjectives previously judged to be either descriptive of a figuratively 'round' or a 'sharp' personality were associated with names containing either round- or sharp-sounding phonemes, respectively. These results demonstrate that sound symbolic associations extend to existing lexical stimuli, providing a new example of non-arbitrary mappings between form and meaning.

Studies in geometric quantization

International Nuclear Information System (INIS)

Tuynman, G.M.

1988-01-01

This thesis contains five chapters, of which the first, entitled 'What is prequantization, and what is geometric quantization?', is meant as an introduction to geometric quantization for the non-specialist. The second chapter, entitled 'Central extensions and physics' deals with the notion of central extensions of manifolds and elaborates and proves the statements made in the first chapter. Central extensions of manifolds occur in physics as the freedom of a phase factor in the quantum mechanical state vector, as the phase factor in the prequantization process of classical mechanics and it appears in mathematics when studying central extension of Lie groups. In this chapter the connection between these central extensions is investigated and a remarkable similarity between classical and quantum mechanics is shown. In chapter three a classical model is given for the hydrogen atom including spin-orbit and spin-spin interaction. The method of geometric quantization is applied to this model and the results are discussed. In the final chapters (4 and 5) an explicit method to calculate the operators corresponding to classical observables is given when the phase space is a Kaehler manifold. The obtained formula are then used to quantise symplectic manifolds which are irreducible hermitian symmetric spaces and the results are compared with other quantization procedures applied to these manifolds (in particular to Berezin's quantization). 91 refs.; 3 tabs

A unified construction for the algebro-geometric quasiperiodic solutions of the Lotka-Volterra and relativistic Lotka-Volterra hierarchy

Science.gov (United States)

Zhao, Peng; Fan, Engui

2015-04-01

In this paper, a new type of integrable differential-difference hierarchy, namely, the generalized relativistic Lotka-Volterra (GRLV) hierarchy, is introduced. This hierarchy is closely related to Lotka-Volterra lattice and relativistic Lotka-Volterra lattice, which allows us to provide a unified and effective way to obtain some exact solutions for both the Lotka-Volterra hierarchy and the relativistic Lotka-Volterra hierarchy. In particular, we shall construct algebro-geometric quasiperiodic solutions for the LV hierarchy and the RLV hierarchy in a unified manner on the basis of the finite gap integration theory.

Exploring anti-community structure in networks with application to incompatibility of traditional Chinese medicine

Science.gov (United States)

Zhu, Jiajing; Liu, Yongguo; Zhang, Yun; Liu, Xiaofeng; Xiao, Yonghua; Wang, Shidong; Wu, Xindong

2017-11-01

Community structure is one of the most important properties in networks, in which a node shares its most connections with the others in the same community. On the contrary, the anti-community structure means the nodes in the same group have few or no connections with each other. In Traditional Chinese Medicine (TCM), the incompatibility problem of herbs is a challenge to the clinical medication safety. In this paper, we propose a new anti-community detection algorithm, Random non-nEighboring nOde expansioN (REON), to find anti-communities in networks, in which a new evaluation criterion, anti-modularity, is designed to measure the quality of the obtained anti-community structure. In order to establish anti-communities in REON, we expand the node set by non-neighboring node expansion and regard the node set with the highest anti-modularity as an anti-community. Inspired by the phenomenon that the node with higher degree has greater contribution to the anti-modularity, an improved algorithm called REONI is developed by expanding node set by the non-neighboring node with the maximum degree, which greatly enhances the efficiency of REON. Experiments on synthetic and real-world networks demonstrate the superiority of the proposed algorithms over the existing methods. In addition, by applying REONI to the herb network, we find that it can discover incompatible herb combinations.

Understanding geometric algebra for electromagnetic theory

CERN Document Server

Arthur, John W

2011-01-01

"This book aims to disseminate geometric algebra as a straightforward mathematical tool set for working with and understanding classical electromagnetic theory. It's target readership is anyone who has some knowledge of electromagnetic theory, predominantly ordinary scientists and engineers who use it in the course of their work, or postgraduate students and senior undergraduates who are seeking to broaden their knowledge and increase their understanding of the subject. It is assumed that the reader is not a mathematical specialist and is neither familiar with geometric algebra or its application to electromagnetic theory. The modern approach, geometric algebra, is the mathematical tool set we should all have started out with and once the reader has a grasp of the subject, he or she cannot fail to realize that traditional vector analysis is really awkward and even misleading by comparison"--Provided by publisher.

Lattice degeneracies of geometric fermions

International Nuclear Information System (INIS)

Raszillier, H.

1983-05-01

We give the minimal numbers of degrees of freedom carried by geometric fermions on all lattices of maximal symmetries in d = 2, 3, and 4 dimensions. These numbers are lattice dependent, but in the (free) continuum limit, part of the degrees of freedom have to escape to infinity by a Wilson mechanism built in, and 2sup(d) survive for any lattice. On self-reciprocal lattices we compare the minimal numbers of degrees of freedom of geometric fermions with the minimal numbers of naive fermions on these lattices and argue that these numbers are equal. (orig.)

Morphing of geometric composites via residual swelling.

Science.gov (United States)

Pezzulla, Matteo; Shillig, Steven A; Nardinocchi, Paola; Holmes, Douglas P

2015-08-07

Understanding and controlling the shape of thin, soft objects has been the focus of significant research efforts among physicists, biologists, and engineers in the last decade. These studies aim to utilize advanced materials in novel, adaptive ways such as fabricating smart actuators or mimicking living tissues. Here, we present the controlled growth-like morphing of 2D sheets into 3D shapes by preparing geometric composite structures that deform by residual swelling. The morphing of these geometric composites is dictated by both swelling and geometry, with diffusion controlling the swelling-induced actuation, and geometric confinement dictating the structure's deformed shape. Building on a simple mechanical analog, we present an analytical model that quantitatively describes how the Gaussian and mean curvatures of a thin disk are affected by the interplay among geometry, mechanics, and swelling. This model is in excellent agreement with our experiments and numerics. We show that the dynamics of residual swelling is dictated by a competition between two characteristic diffusive length scales governed by geometry. Our results provide the first 2D analog of Timoshenko's classical formula for the thermal bending of bimetallic beams - our generalization explains how the Gaussian curvature of a 2D geometric composite is affected by geometry and elasticity. The understanding conferred by these results suggests that the controlled shaping of geometric composites may provide a simple complement to traditional manufacturing techniques.

Thomas Young's contributions to geometrical optics.

Science.gov (United States)

Atchison, David A; Charman, W Neil

2011-07-01

In addition to his work on physical optics, Thomas Young (1773-1829) made several contributions to geometrical optics, most of which received little recognition in his time or since. We describe and assess some of these contributions: Young's construction (the basis for much of his geometric work), paraxial refraction equations, oblique astigmatism and field curvature, and gradient-index optics. © 2011 The Authors. Clinical and Experimental Optometry © 2011 Optometrists Association Australia.

Exchange transfusion of least incompatible blood for severe hemolytic disease of the newborn due to anti-Rh17.

Science.gov (United States)

Li, Bi-juan; Jiang, Yuan-jun; Yuan, Fen; Ye, Hong-xing

2010-02-01

HDN attributed to the rare Rh variants has become more and more significant caused by anti-D, but the compatible blood is usually very difficult to obtain when exchange transfusion is required. We treated a 10-hour neonate of O, D + C + c - E - e+ blood group with severe HDN due to anti-Rh17 with least incompatible blood typed O, D + C - c + E + e-. The neonatal hemolysis was relieved obviously and bilirubin was reduced gradually after exchange transfusion. The infant was discharged in good health 13 days after birth with 135.0 g/L, 28.0 micromol/L and 10.7 micromol/L of Hb, total bilirubin and direct bilirubin, respectively. No sequelae were observed in a three-year follow-up. The result suggesting that the least incompatible blood is an alternative choice for exchange transfusion in severe HDN due to anti-Rh17 in case that Rh17 antigen-negative blood is unavailable.

An Introduction to Geometric Algebra with some Preliminary Thoughts on the Geometric Meaning of Quantum Mechanics

International Nuclear Information System (INIS)

Horn, Martin Erik

2014-01-01

It is still a great riddle to me why Wolfgang Pauli and P.A.M. Dirac had not fully grasped the meaning of their own mathematical constructions. They invented magnificent, fantastic and very important mathematical features of modern physics, but they only delivered half of the interpretations of their own inventions. Of course, Pauli matrices and Dirac matrices represent operators, which Pauli and Dirac discussed in length. But this is only part of the true meaning behind them, as the non-commutative ideas of Grassmann, Clifford, Hamilton and Cartan allow a second, very far reaching interpretation of Pauli and Dirac matrices. An introduction to this alternative interpretation will be discussed. Some applications of this view on Pauli and Dirac matrices are given, e.g. a geometric algebra picture of the plane wave solution of the Maxwell equation, a geometric algebra picture of special relativity, a toy model of SU(3) symmetry, and some only very preliminary thoughts about a possible geometric meaning of quantum mechanics

Geometric integrators for stochastic rigid body dynamics

KAUST Repository

Tretyakov, Mikhail

2016-01-05

Geometric integrators play an important role in simulating dynamical systems on long time intervals with high accuracy. We will illustrate geometric integration ideas within the stochastic context, mostly on examples of stochastic thermostats for rigid body dynamics. The talk will be mainly based on joint recent work with Rusland Davidchak and Tom Ouldridge.

Geometric integrators for stochastic rigid body dynamics

KAUST Repository

Tretyakov, Mikhail

2016-01-01

Geometric integrators play an important role in simulating dynamical systems on long time intervals with high accuracy. We will illustrate geometric integration ideas within the stochastic context, mostly on examples of stochastic thermostats for rigid body dynamics. The talk will be mainly based on joint recent work with Rusland Davidchak and Tom Ouldridge.

Multi-language naming game

Science.gov (United States)

Zhou, Jianfeng; Lou, Yang; Chen, Guanrong; Tang, Wallace K. S.

2018-04-01

Naming game is a simulation-based experiment used to study the evolution of languages. The conventional naming game focuses on a single language. In this paper, a novel naming game model named multi-language naming game (MLNG) is proposed, where the agents are different-language speakers who cannot communicate with each other without a translator (interpreter) in between. The MLNG model is general, capable of managing k different languages with k ≥ 2. For illustration, the paper only discusses the MLNG with two different languages, and studies five representative network topologies, namely random-graph, WS small-world, NW small-world, scale-free, and random-triangle topologies. Simulation and analysis results both show that: 1) using the network features and based on the proportion of translators the probability of establishing a conversation between two or three agents can be theoretically estimated; 2) the relationship between the convergence speed and the proportion of translators has a power-law-like relation; 3) different agents require different memory sizes, thus a local memory allocation rule is recommended for saving memory resources. The new model and new findings should be useful for further studies of naming games and for better understanding of languages evolution from a dynamical network perspective.

Comments on open-quotes interpretations of quantum mechanics, joint measurement of incompatible observables, and counterfactual definitenessclose quotes

International Nuclear Information System (INIS)

Stapp, H.P.

1994-01-01

Some seeming logical deficiencies in a recent paper are described. The author responds to the arguments of the work by de Muynck, De Baere, and Martens (MDM), who argue it is widely accepted today that some sort of nonlocal effect is needed to resolve the problems raised by the works of Einstein, Podolsky, and Rosen (EPR) and John Bell. In MBM a variety of arguments are set forth that aim to invalidate the existing purported proofs of nonlocality and to provide, moreover, a local solution to the problems uncovered by EPR and Bell. Much of the argumentation in MBM is based on the idea of introducing 'nonideal' measurements, which, according to MBM, allow one to construct joint probability distributions for incompatible observables. The existence of a bona fide joint probability distribution for the incompatible observables occurring in the EPRB experiments would entail that Bell's inequalities can be satisfied, and hence that the mathematical basis for the nonlocal effects would disappear. This relult would apparently allow one to eliminate the need for nonlocal effects by considering experiments of this new kind

Supervisor-employee power distance incompatibility, gender similarity, and relationship conflict: A test of interpersonal interaction theory.

Science.gov (United States)

Graham, Katrina A; Dust, Scott B; Ziegert, Jonathan C

2018-03-01

According to interpersonal interaction theory, relational harmony surfaces when two individuals have compatible interaction styles. Building from this theory, we propose that supervisor-employee power distance orientation incompatibility will be related to employees' experience of higher levels of relationship conflict with their supervisors. Additionally, we propose an asymmetrical incongruence effect such that relationship conflict will be highest when supervisors are high in power distance and employees are low in power distance. Furthermore, we address calls in interpersonal interaction research for more direct attention to the social context of the dyadic interaction and explore the moderating effects of supervisor-employee gender (dis)similarity on the relationship between this incompatibility and conflict. We propose that supervisor-employee gender dissimilarity (e.g., male-female or female-male pairs) acts as a conditional moderator, neutralizing the power distance incongruence effect and the asymmetrical incongruence effect. Using 259 supervisor-employee dyads in the physical therapy industry, the hypotheses were generally supported. Theoretical and practical implications regarding the unique benefits of power distance compatibility and gender diversity in supervisor-employee dyads are discussed. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Whole genome association mapping by incompatibilities and local perfect phylogenies

DEFF Research Database (Denmark)

Mailund, Thomas; Besenbacher, Søren; Schierup, Mikkel Heide

2006-01-01

around each marker that is compatible with a single phylogenetic tree. This perfect phylogenetic tree is treated as a decision tree for determining disease status, and scored by its accuracy as a decision tree. The rationale for this is that the perfect phylogeny near a disease affecting mutation should...... a fast method for accurate localisation of disease causing variants in high density case-control association mapping experiments with large numbers of cases and controls. The method searches for significant clustering of case chromosomes in the "perfect" phylogenetic tree defined by the largest region...... provide more information about the affected/unaffected classification than random trees. If regions of compatibility contain few markers, due to e.g. large marker spacing, the algorithm can allow the inclusion of incompatibility markers in order to enlarge the regions prior to estimating their phylogeny...

Geometric reconstruction methods for electron tomography

DEFF Research Database (Denmark)

Alpers, Andreas; Gardner, Richard J.; König, Stefan

2013-01-01

Electron tomography is becoming an increasingly important tool in materials science for studying the three-dimensional morphologies and chemical compositions of nanostructures. The image quality obtained by many current algorithms is seriously affected by the problems of missing wedge artefacts...... and discuss several algorithms from the mathematical fields of geometric and discrete tomography. The algorithms incorporate geometric prior knowledge (mainly convexity and homogeneity), which also in principle considerably reduces the number of tilt angles required. Results are discussed...

Geometrical formulation of the conformal Ward identity

International Nuclear Information System (INIS)

Kachkachi, M.

2002-08-01

In this paper we use deep ideas in complex geometry that proved to be very powerful in unveiling the Polyakov measure on the moduli space of Riemann surfaces and lead to obtain the partition function of perturbative string theory for 2, 3, 4 loops. Indeed, a geometrical interpretation of the conformal Ward identity in two dimensional conformal field theory is proposed: the conformal anomaly is interpreted as a deformation of the complex structure of the basic Riemann surface. This point of view is in line with the modern trend of geometric quantizations that are based on deformations of classical structures. Then, we solve the conformal Ward identity by using this geometrical formalism. (author)

Normed algebras and the geometric series test

Directory of Open Access Journals (Sweden)

Robert Kantrowitz

2017-11-01

Full Text Available The purpose of this article is to survey a class of normed algebras that share many central features of Banach algebras, save for completeness. The likeness of these algebras to Banach algebras derives from the fact that the geometric series test is valid, whereas the lack of completeness points to the failure of the absolute convergence test for series in the algebra. Our main result is a compendium of conditions that are all equivalent to the validity of the geometric series test for commutative unital normed algebras. Several examples in the final section showcase some incomplete normed algebras for which the geometric series test is valid, and still others for which it is not.

Initial singularity and pure geometric field theories

Science.gov (United States)

Wanas, M. I.; Kamal, Mona M.; Dabash, Tahia F.

2018-01-01

In the present article we use a modified version of the geodesic equation, together with a modified version of the Raychaudhuri equation, to study initial singularities. These modified equations are used to account for the effect of the spin-torsion interaction on the existence of initial singularities in cosmological models. Such models are the results of solutions of the field equations of a class of field theories termed pure geometric. The geometric structure used in this study is an absolute parallelism structure satisfying the cosmological principle. It is shown that the existence of initial singularities is subject to some mathematical (geometric) conditions. The scheme suggested for this study can be easily generalized.

Stock price prediction using geometric Brownian motion

Science.gov (United States)

Farida Agustini, W.; Restu Affianti, Ika; Putri, Endah RM

2018-03-01

Geometric Brownian motion is a mathematical model for predicting the future price of stock. The phase that done before stock price prediction is determine stock expected price formulation and determine the confidence level of 95%. On stock price prediction using geometric Brownian Motion model, the algorithm starts from calculating the value of return, followed by estimating value of volatility and drift, obtain the stock price forecast, calculating the forecast MAPE, calculating the stock expected price and calculating the confidence level of 95%. Based on the research, the output analysis shows that geometric Brownian motion model is the prediction technique with high rate of accuracy. It is proven with forecast MAPE value ≤ 20%.

Geometric optimization and sums of algebraic functions

KAUST Repository

Vigneron, Antoine E.

2014-01-01

We present a new optimization technique that yields the first FPTAS for several geometric problems. These problems reduce to optimizing a sum of nonnegative, constant description complexity algebraic functions. We first give an FPTAS for optimizing such a sum of algebraic functions, and then we apply it to several geometric optimization problems. We obtain the first FPTAS for two fundamental geometric shape-matching problems in fixed dimension: maximizing the volume of overlap of two polyhedra under rigid motions and minimizing their symmetric difference. We obtain the first FPTAS for other problems in fixed dimension, such as computing an optimal ray in a weighted subdivision, finding the largest axially symmetric subset of a polyhedron, and computing minimum-area hulls.

The Geometric Phase of Stock Trading.

Science.gov (United States)

Altafini, Claudio

2016-01-01

Geometric phases describe how in a continuous-time dynamical system the displacement of a variable (called phase variable) can be related to other variables (shape variables) undergoing a cyclic motion, according to an area rule. The aim of this paper is to show that geometric phases can exist also for discrete-time systems, and even when the cycles in shape space have zero area. A context in which this principle can be applied is stock trading. A zero-area cycle in shape space represents the type of trading operations normally carried out by high-frequency traders (entering and exiting a position on a fast time-scale), while the phase variable represents the cash balance of a trader. Under the assumption that trading impacts stock prices, even zero-area cyclic trading operations can induce geometric phases, i.e., profits or losses, without affecting the stock quote.

Interallelic and intergenic incompatibilities of the Prdm9 (Hst1) gene in mouse hybrid sterility

Czech Academy of Sciences Publication Activity Database

Flachs, Petr; Mihola, Ondřej; Šimeček, Petr; Gregorová, Soňa; Schimenti, J.C.; Matsui, Y.; Baudat, F.; de Massy, B.; Piálek, Jaroslav; Forejt, Jiří; Trachtulec, Zdeněk

2012-01-01

Roč. 8, č. 11 (2012), e1003044 ISSN 1553-7404 R&D Projects: GA MŠk(CZ) 1M0520; GA ČR GAP305/10/1931; GA ČR GA206/08/0640; GA ČR(CZ) GPP305/11/P630 Institutional research plan: CEZ:AV0Z50520514 Institutional support: RVO:68081766 ; RVO:68378050 Keywords : hybrid sterility * meiosis * incompatibility Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 8.517, year: 2012

Socioeconomic determinants of first names

NARCIS (Netherlands)

Bloothooft, G.; Onland, D.

2011-01-01

Modern naming practices in the Netherlands between 1982 and 2005 were studied on the basis of 1409 popular first names, divided into fourteen name groups determined by the common preferences of parents for the names involved. Socioeconomic variables such as family income, parents' level of

Can EPR non-locality be geometrical?

International Nuclear Information System (INIS)

Ne'eman, Y.

1995-01-01

The presence in Quantum Mechanics of non-local correlations is one of the two fundamentally non-intuitive features of that theory. The non-local correlations themselves fall into two classes: EPR and Geometrical. The non-local characteristics of the geometrical type are well-understood and are not suspected of possibly generating acausal features, such as faster-than-light propagation of information. This has especially become true since the emergence of a geometrical treatment for the relevant gauge theories, i.e. Fiber Bundle geometry, in which the quantum non-localities are seen to correspond to pure homotopy considerations. This aspect is reviewed in section 2. Contrary-wise, from its very conception, the EPR situation was felt to be paradoxical. It has been suggested that the non-local features of EPR might also derive from geometrical considerations, like all other non-local characteristics of QM. In[7], one of the authors was able to point out several plausibility arguments for this thesis, emphasizing in particular similarities between the non-local correlations provided by any gauge field theory and those required by the preservation of the quantum numbers of the original EPR state-vector, throughout its spatially-extended mode. The derivation was, however, somewhat incomplete, especially because of the apparent difference between, on the one hand, the closed spatial loops arising in the analysis of the geometrical non-localities, from Aharonov-Bohm and Berry phases to magnetic monopoles and instantons, and on the other hand, in the EPR case, the open line drawn by the positions of the two moving decay products of the disintegrating particle. In what follows, the authors endeavor to remove this obstacle and show that as in all other QM non-localities, EPR is somehow related to closed loops, almost involving homotopy considerations. They develop this view in section 3

Plastic incompatibility stresses and stored elastic energy in plastically deformed copper

Energy Technology Data Exchange (ETDEWEB)

Baczmanski, A. [Faculty of Physics and Applied Computer Science, AGH-University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow (Poland)], E-mail: baczman@ftj.agh.edu.pl; Hfaiedh, N.; Francois, M. [LASMIS, Universite de Technologie de Troyes, 11 rue Marie Curie, B.P. 2060, 10010 Troyes (France); Wierzbanowski, K. [Faculty of Physics and Applied Computer Science, AGH-University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow (Poland)

2009-02-15

The X-ray diffraction method and theoretical model of elastoplastic deformation were used to examine the residual stresses in polycrystalline copper. To this end, the {l_brace}2 2 0{r_brace} strain pole figures were determined for samples subjected to different magnitudes of tensile deformation. Using diffraction data and the self-consistent model, the tensor of plastic incompatibility stress was found for each orientation of a polycrystalline grain. Crystallographic textures, macroscopic and second-order residual stresses were considered in the analysis. As a result, the distributions of elastic stored energy and von Mises equivalent stress were presented in Euler space and correlated with the preferred orientations of grains. Moreover, using the model prediction, the variation of the critical resolved shear stress with grain orientation was determined.

Geometrical properties of a 'snowflake' divertor

International Nuclear Information System (INIS)

Ryutov, D. D.

2007-01-01

Using a simple set of poloidal field coils, one can reach the situation in which the null of the poloidal magnetic field in the divertor region is of second order, not of first order as in the usual X-point divertor. Then, the separatrix in the vicinity of the null point splits the poloidal plane not into four sectors, but into six sectors, making the whole structure look like a snowflake (hence the name). This arrangement allows one to spread the heat load over a much broader area than in the case of a standard divertor. A disadvantage of this configuration is that it is topologically unstable, and, with the current in the plasma varying with time, it would switch either to the standard X-point mode, or to the mode with two X-points close to each other. To avoid this problem, it is suggested to have a current in the divertor coils that is roughly 5% higher than in an ''optimum'' regime (the one in which a snowflake separatrix is formed). In this mode, the configuration becomes stable and can be controlled by varying the current in the divertor coils in concert with the plasma current; on the other hand, a strong flaring of the scrape-off layer still remains in force. Geometrical properties of this configuration are analyzed. Potential advantages and disadvantages of this scheme are discussed

Elemental Etymology: What's in a Name?

Science.gov (United States)

Ball, David W.

1985-01-01

Examines the origin of the names (or etymologies) of the chemical elements. Includes tables listing elements: (1) with names of obscure origin; (2) named for colors; (3) named after real or mythical people; (4) named after places; (5) named after heavenly bodies; and (6) having names of miscellaneous origin. (JN)

Multiscale geometric modeling of macromolecules II: Lagrangian representation

Science.gov (United States)

Feng, Xin; Xia, Kelin; Chen, Zhan; Tong, Yiying; Wei, Guo-Wei

2013-01-01

Geometric modeling of biomolecules plays an essential role in the conceptualization of biolmolecular structure, function, dynamics and transport. Qualitatively, geometric modeling offers a basis for molecular visualization, which is crucial for the understanding of molecular structure and interactions. Quantitatively, geometric modeling bridges the gap between molecular information, such as that from X-ray, NMR and cryo-EM, and theoretical/mathematical models, such as molecular dynamics, the Poisson-Boltzmann equation and the Nernst-Planck equation. In this work, we present a family of variational multiscale geometric models for macromolecular systems. Our models are able to combine multiresolution geometric modeling with multiscale electrostatic modeling in a unified variational framework. We discuss a suite of techniques for molecular surface generation, molecular surface meshing, molecular volumetric meshing, and the estimation of Hadwiger’s functionals. Emphasis is given to the multiresolution representations of biomolecules and the associated multiscale electrostatic analyses as well as multiresolution curvature characterizations. The resulting fine resolution representations of a biomolecular system enable the detailed analysis of solvent-solute interaction, and ion channel dynamics, while our coarse resolution representations highlight the compatibility of protein-ligand bindings and possibility of protein-protein interactions. PMID:23813599

Geometrical tile design for complex neighborhoods.

Science.gov (United States)

Czeizler, Eugen; Kari, Lila

2009-01-01

Recent research has showed that tile systems are one of the most suitable theoretical frameworks for the spatial study and modeling of self-assembly processes, such as the formation of DNA and protein oligomeric structures. A Wang tile is a unit square, with glues on its edges, attaching to other tiles and forming larger and larger structures. Although quite intuitive, the idea of glues placed on the edges of a tile is not always natural for simulating the interactions occurring in some real systems. For example, when considering protein self-assembly, the shape of a protein is the main determinant of its functions and its interactions with other proteins. Our goal is to use geometric tiles, i.e., square tiles with geometrical protrusions on their edges, for simulating tiled paths (zippers) with complex neighborhoods, by ribbons of geometric tiles with simple, local neighborhoods. This paper is a step toward solving the general case of an arbitrary neighborhood, by proposing geometric tile designs that solve the case of a "tall" von Neumann neighborhood, the case of the f-shaped neighborhood, and the case of a 3 x 5 "filled" rectangular neighborhood. The techniques can be combined and generalized to solve the problem in the case of any neighborhood, centered at the tile of reference, and included in a 3 x (2k + 1) rectangle.

Effect of radiation induced defects and incompatibility elastic stresses on the diffusion of ion implantated boron in silicon at the pulse annealing

International Nuclear Information System (INIS)

Stel'makh, V.F.; Suprun-Belevich, Yu.R.; Chelyadinskij, A.R.

1987-01-01

For determination of radiation defects effect on diffusion of the implanted boron in silicon at the pulse annealing, silicon crystals, implanted with boron, preliminary irradiated by silicon ions of different flows for checked defects implantation, were investigated. Silicon crystals additionally implanted by Ge + ions were investigated to research the effect of the incompatibility elastic stresses, emerging in implanted structures due to lattice periods noncoincidence in matrix and alloyed layers, on implanted boron diffusion. It is shown, that abnormally high values of boron diffusion coefficients in silicon at the pulse annealing are explained by silicon interstitial atom participation in redistribution of diffusing boron atoms by two diffusion channels - interstitial and vacation - and by incompatibility elastic stresses effect on diffusion

Geometric integration for particle accelerators

Science.gov (United States)

Forest, Étienne

2006-05-01

This paper is a very personal view of the field of geometric integration in accelerator physics—a field where often work of the highest quality is buried in lost technical notes or even not published; one has only to think of Simon van der Meer Nobel prize work on stochastic cooling—unpublished in any refereed journal. So I reconstructed the relevant history of geometrical integration in accelerator physics as much as I could by talking to collaborators and using my own understanding of the field. The reader should not be too surprised if this account is somewhere between history, science and perhaps even fiction.

Geometric integration for particle accelerators

International Nuclear Information System (INIS)

Forest, Etienne

2006-01-01

This paper is a very personal view of the field of geometric integration in accelerator physics-a field where often work of the highest quality is buried in lost technical notes or even not published; one has only to think of Simon van der Meer Nobel prize work on stochastic cooling-unpublished in any refereed journal. So I reconstructed the relevant history of geometrical integration in accelerator physics as much as I could by talking to collaborators and using my own understanding of the field. The reader should not be too surprised if this account is somewhere between history, science and perhaps even fiction

Observation of the geometric phase using photon echoes

International Nuclear Information System (INIS)

Tian, Mingzhen; Reibel, Randy R.; Barber, Zeb W.; Fischer, Joe A.; Babbitt, Wm. Randall

2003-01-01

The geometric phase of an atomic system has been observed in V-type three-level barium atoms using photon echoes. The geometric phase results from a cyclic evolution of a two-level subsystem driven by a laser pulse. The phase change is observed on the echo field produced on a different subsystem that is coupled via the ground state to the driven subsystem. The measured geometric phase was half of the solid angle subtended by the Bloch vector along the driven evolution circuit. This evolution has the potential to form universal operations of quantum bits

Geometric and engineering drawing

CERN Document Server

Morling, K

2010-01-01

The new edition of this successful text describes all the geometric instructions and engineering drawing information that are likely to be needed by anyone preparing or interpreting drawings or designs with plenty of exercises to practice these principles.

Study into Point Cloud Geometric Rigidity and Accuracy of TLS-Based Identification of Geometric Bodies

Science.gov (United States)

Klapa, Przemyslaw; Mitka, Bartosz; Zygmunt, Mariusz

2017-12-01

Capability of obtaining a multimillion point cloud in a very short time has made the Terrestrial Laser Scanning (TLS) a widely used tool in many fields of science and technology. The TLS accuracy matches traditional devices used in land surveying (tacheometry, GNSS - RTK), but like any measurement it is burdened with error which affects the precise identification of objects based on their image in the form of a point cloud. The point’s coordinates are determined indirectly by means of measuring the angles and calculating the time of travel of the electromagnetic wave. Each such component has a measurement error which is translated into the final result. The XYZ coordinates of a measuring point are determined with some uncertainty and the very accuracy of determining these coordinates is reduced as the distance to the instrument increases. The paper presents the results of examination of geometrical stability of a point cloud obtained by means terrestrial laser scanner and accuracy evaluation of solids determined using the cloud. Leica P40 scanner and two different settings of measuring points were used in the tests. The first concept involved placing a few balls in the field and then scanning them from various sides at similar distances. The second part of measurement involved placing balls and scanning them a few times from one side but at varying distances from the instrument to the object. Each measurement encompassed a scan of the object with automatic determination of its position and geometry. The desk studies involved a semiautomatic fitting of solids and measurement of their geometrical elements, and comparison of parameters that determine their geometry and location in space. The differences of measures of geometrical elements of balls and translations vectors of the solids centres indicate the geometrical changes of the point cloud depending on the scanning distance and parameters. The results indicate the changes in the geometry of scanned objects

MARKED PERSONAL NAMES: AN ANTROPONIMIC STUDY OF BALINESE STUDENTS’ NAMES IN DENPASAR

Directory of Open Access Journals (Sweden)

Ni Made Iwan Indrawan

2015-07-01

Full Text Available The research aims to account for the Marked Balinese Students’ Personal Names. Four research problems are studied, namely (1 the criteria used to distinguish the marked names (NDMBmk and the unmarked ones (NDMTBmk, (2 the functions of the markedness, (3 the factors that influence it, and (4 the ideologies that operate behind it. The markedness of personal names reflect a relation between the arbitrariness in language uses and the extralinguistic factors influencing it. In the context of Balinese, the tradition, legal practices, and the globalisation may affect the arbitrariness. In order to determine NDMBmk, criteria of markedness was constructed. According to the criteria, structurally, NDMBmk consist of at least five elements, as Anak Agung Arim Kasunu Arya Penarungan. Behaviorally, they may consist of names not derived from Balinese and/or Sanskrit, such as Giovani on I Gede Adeyaka Giovani, adopt a foreign spelling system as Chrisna on Ni Putu Chrisna Wulandari, or use no markers of Balinese ethnics or caste as Yunisari Wira Putri. Out of 698 sampled names, NDMBmk are found 54. Besides denoting, the marked elements also function to distinguish personal identities, to shape the existence of the name holder, to connote particular perception, and to reflect the changing era. The factors influencing the markedness are the need to express something new, a wish to acculturate, to raise status or keep a distance socially, and to demonstrate a linguistic expertise, or when seeing from the concept of imagery, the factors are the imagery on something new and on social status or distancing. The ideologies behind the phenomenon are globalist, nationalist, and the casteless-Balinese.

MARKED PERSONAL NAMES: AN ANTROPONIMIC STUDY OF BALINESE STUDENTS’ NAMES IN DENPASAR

Directory of Open Access Journals (Sweden)

Ni Made Iwan Indrawan

2012-07-01

Full Text Available The research aims to account for the Marked Balinese Students’ Personal Names. Four research problems are studied, namely (1 the criteria used to distinguish the marked names (NDMBmk and the unmarked ones (NDMTBmk, (2 the functions of the markedness, (3 the factors that influence it, and (4 the ideologies that operate behind it. The markedness of personal names reflect a relation between the arbitrariness in language uses and the extralinguistic factors influencing it. In the context of Balinese, the tradition, legal practices, and the globalisation may affect the arbitrariness. In order to determine NDMBmk, criteria of markedness was constructed. According to the criteria, structurally, NDMBmk consist of at least five elements, as Anak Agung Arim Kasunu Arya Penarungan. Behaviorally, they may consist of names not derived from Balinese and/or Sanskrit, such as Giovani on I Gede Adeyaka Giovani, adopt a foreign spelling system as Chrisna on Ni Putu Chrisna Wulandari, or use no markers of Balinese ethnics or caste as Yunisari Wira Putri. Out of 698 sampled names, NDMBmk are found 54. Besides denoting, the marked elements also function to distinguish personal identities, to shape the existence of the name holder, to connote particular perception, and to reflect the changing era. The factors influencing the markedness are the need to express something new, a wish to acculturate, to raise status or keep a distance socially, and to demonstrate a linguistic expertise, or when seeing from the concept of imagery, the factors are the imagery on something new and on social status or distancing. The ideologies behind the phenomenon are globalist, nationalist, and the casteless-Balinese.

Ending tolerance as a solution to incompatibility: The Danish ‘crisis of multiculturalism’

DEFF Research Database (Denmark)

Hervik, Peter

2012-01-01

Successful integration must include the long-term enactment of ‘the will to feel Danish’. As Jews in Denmark have done in the course of many generations, so immigrant Muslims must immerse themselves to the extent that feeling Danish is naturalized. Such is the perspective proposed in a recent focus...... group discussion in Denmark on the integration of Muslims into Danish society. This idea of incompatibility between native Danes and Muslim ‘newcomers’ has become a salient feature of what is termed ‘value-based journalism’ and ‘value-based politics’ in the last decade. This article traces the origin...

On identifying name equivalences in digital libraries. Name equivalence, Surname matching, Author identification, Databases

Directory of Open Access Journals (Sweden)

Dror G. Feitelson

2004-01-01

Full Text Available The services provided by digital libraries can be much improved by correctly identifying variants of the same name. For example, this will allow for better retrieval of all the works by a certain author. We focus on variants caused by abbreviations of first names, and show that significant achievements are possible by simple lexical analysis and comparison of names. This is done in two steps: first a pairwise matching of names is performed, and then these are used to find cliques of equivalent names. However, these steps can each be performed in a variety of ways. We therefore conduct an experimental analysis using two real datasets to find which approaches actually work well in practice. Interestingly, this depends on the size of the repository, as larger repositories may have many more similar names.

Geometric inequalities for axially symmetric black holes

International Nuclear Information System (INIS)

Dain, Sergio

2012-01-01

A geometric inequality in general relativity relates quantities that have both a physical interpretation and a geometrical definition. It is well known that the parameters that characterize the Kerr-Newman black hole satisfy several important geometric inequalities. Remarkably enough, some of these inequalities also hold for dynamical black holes. This kind of inequalities play an important role in the characterization of the gravitational collapse; they are closely related with the cosmic censorship conjecture. Axially symmetric black holes are the natural candidates to study these inequalities because the quasi-local angular momentum is well defined for them. We review recent results in this subject and we also describe the main ideas behind the proofs. Finally, a list of relevant open problems is presented. (topical review)

EARLY HISTORY OF GEOMETRIC PROBABILITY AND STEREOLOGY

Directory of Open Access Journals (Sweden)

Magdalena Hykšová

2012-03-01

Full Text Available The paper provides an account of the history of geometric probability and stereology from the time of Newton to the early 20th century. It depicts the development of two parallel ways: on one hand, the theory of geometric probability was formed with minor attention paid to other applications than those concerning spatial chance games. On the other hand, practical rules of the estimation of area or volume fraction and other characteristics, easily deducible from geometric probability theory, were proposed without the knowledge of this branch. A special attention is paid to the paper of J.-É. Barbier published in 1860, which contained the fundamental stereological formulas, but remained almost unnoticed both by mathematicians and practicians.

Temporal Features of the Differentiation between Self-Name and Religious Leader Name among Christians: An ERP Study

Directory of Open Access Journals (Sweden)

Ruixue Xia

2018-01-01

Full Text Available Existing neuroimaging studies have shown that religion, as a subjective culture, can influence self-referential processing. However, the time course of this impact remains unclear. The present study examined how Christians process their own names, the name of their religious leader (i.e., Jesus, and a famous person’s name (i.e., Yao Ming. Behavioral and EEG data were recorded while the participants performed a name-color judgment task for these three names. The behavioral data showed no significant differences in reaction time or accuracy among the names. However, the ERP data showed that the P200 and P300 amplitudes elicited by the self-name and religious leader name were larger than those elicited by the famous name. Furthermore, the self-name also elicited a larger P300 amplitude than the religious leader name did. These results suggested that both the self-name and the religious leader name were processed preferentially due to their important social value for the self as compared to a generally famous name. Importantly, the dissociation between the self-name and the religious leader name was observed at a high-order cognitive stage, which might be attributed to their different roles in one’s self-concept.

Naming names: the first women taxonomists in mycology

Directory of Open Access Journals (Sweden)

Sara Maroske

2018-03-01

Full Text Available The transition from amateur to professional in natural history is generally regarded as having taken place in the nineteenth century, but landmark events such as the 1917 appointment of mycologist Johanna Westerdijk (1883–1961 as the first female professor in the Netherlands indicate that the pattern of change for women was more varied and delayed than for men. We investigate this transition in mycology, and identify only 43 women in the Western World who published scientific mycological literature pre-1900, of whom twelve published new fungal taxa. By charting the emergence of these women over time, and comparing the output of self-taught amateurs and university graduates, we establish the key role of access to higher education in female participation in mycology. Using a suite of strategies, six of the self-taught amateurs managed to overcome their educational disadvantages and name names — Catharina Dörrien (the first to name a fungal taxon, Marie-Anne Libert, Mary Elizabeth Banning, Élise-Caroline Bommer, Mariette Rousseau, and Annie Lorrain Smith. By 1900, the professional era for women in mycology was underway, and increasing numbers published new taxa. Parity with male colleagues in recognition and promotion, however, remains an ongoing issue. Key words: Amateurs, Fungi, Gender studies, History of science, Plant pathology

Oral administration of Chinese herbal medicine during gestation period for preventing hemolytic disease of the newborn due to ABO incompatibility: A systematic review of randomized controlled trials.

Science.gov (United States)

Cao, Huijuan; Wu, Ruohan; Han, Mei; Caldwell, Patrina Ha Yuen; Liu, Jian-Ping

2017-01-01

About 85.3% of hemolytic disease of the newborn (HDN) is caused by maternal-fetal ABO blood group incompatibility. However, there is currently no recommended "best" therapy for ABO incompatibility during pregnancy. To systematically assess the safety and effectiveness of oral Chinese herbal medicine (CHM) for preventing HDN due to ABO incompatibility. The protocol of this review was registered on the PROSPERO website (No. CRD42016038637).Six databases were searched from inception to April 2016. Randomized controlled trials (RCTs) of CHM for maternal-fetal ABO incompatibility were included. The primary outcome was incidence of HDN. The Cochrane risk of bias tool was used to assess the methodological quality of included trials. Risk ratios (RR) and mean differences with 95% confidence interval were used as effect measures. Meta-analyses using Revman 5.3 software were conducted if there were sufficient trials without obvious clinical or statistical heterogeneity available. Totally 28 RCTs involving3413 women were included in the review. The majority of the trials had unclear or high risk of bias. Our study found that the rate of HDN and the incidence of neonatal jaundice might be 70% lower in the herbal medicine group compared with the usual care group (RR from 0.25 to 0.30).After treatment with herbal medicine, women were twice as likely to have antibody titers lower than 1:64 compared with women who received usual care(RR from 2.15 to 3.14) and the umbilical cord blood bilirubin level in the herbal medicine group was 4umol/L lower than in those receiving usual care. There was no difference in Apgar scores or birthweights between the two groups. This review found very low-quality evidence that CHM prevented HDN caused by maternal-fetal ABO incompatibility. No firm conclusions can be drawn regarding the effectiveness or safety of CHM for this condition.

Oral administration of Chinese herbal medicine during gestation period for preventing hemolytic disease of the newborn due to ABO incompatibility: A systematic review of randomized controlled trials.

Directory of Open Access Journals (Sweden)

Huijuan Cao

Full Text Available About 85.3% of hemolytic disease of the newborn (HDN is caused by maternal-fetal ABO blood group incompatibility. However, there is currently no recommended "best" therapy for ABO incompatibility during pregnancy.To systematically assess the safety and effectiveness of oral Chinese herbal medicine (CHM for preventing HDN due to ABO incompatibility.The protocol of this review was registered on the PROSPERO website (No. CRD42016038637.Six databases were searched from inception to April 2016. Randomized controlled trials (RCTs of CHM for maternal-fetal ABO incompatibility were included. The primary outcome was incidence of HDN. The Cochrane risk of bias tool was used to assess the methodological quality of included trials. Risk ratios (RR and mean differences with 95% confidence interval were used as effect measures. Meta-analyses using Revman 5.3 software were conducted if there were sufficient trials without obvious clinical or statistical heterogeneity available.Totally 28 RCTs involving3413 women were included in the review. The majority of the trials had unclear or high risk of bias. Our study found that the rate of HDN and the incidence of neonatal jaundice might be 70% lower in the herbal medicine group compared with the usual care group (RR from 0.25 to 0.30.After treatment with herbal medicine, women were twice as likely to have antibody titers lower than 1:64 compared with women who received usual care(RR from 2.15 to 3.14 and the umbilical cord blood bilirubin level in the herbal medicine group was 4umol/L lower than in those receiving usual care. There was no difference in Apgar scores or birthweights between the two groups.This review found very low-quality evidence that CHM prevented HDN caused by maternal-fetal ABO incompatibility. No firm conclusions can be drawn regarding the effectiveness or safety of CHM for this condition.

On streamlining the Ukrainian names of plants. Information 7. Spelling the names of plant varieties.

Directory of Open Access Journals (Sweden)

В. М. Меженський

2016-07-01

Full Text Available Purpose. To analyse the practice of transliteration of the Ukrainian cultivar names and rendering foreign names by means of the Ukrainian language, as well as special aspects of cultivar names spelling in special literature. Results. Cultivar names as a special category require preservation of primary graphics or sound type in the other language. This can be achieved by direct inclusion of the original name to the Ukrainian text or by practical transcribing, but not by transliteration or translation. Otherwise, Ukrainian names should be transliterated for inclusion to the texts in Latin characters. Transcription/transliteration in both directions is performed from the source language, though, as practice shows, in some Ukrainian publications the Russian is wrongly used as an intermediary language. Some national scientific publications ignore the recommendations of the International Code of Nomenclature for Cultivated Plants that is not conducive to the success of scientific communication in the globalized world. Conclusions. The foreign names of plant varieties should be entered into the Ukrainian text keeping the original spelling or by means of practical transcription. The loan of foreign names is performed by transcribing directly from the source language; if the language doesn’t have the Latin alphabet, Latinized name transcription is acceptable. Recommendations of the International Code of Nomenclature for Cultivated Plants that concern graphic highlighting of the cultivar names in the text enclosing them in single quotation marks and writing each word of a cultivar name with a capital letter should necessarily be applied in the foreign-language publications and extended to the Ukrainian special literature, at least, in terms of the use of single quotation marks. Ukrainian names should be transliterated only in accordance with the regulations.

Hybrid incompatibilities in the parasitic wasp genus Nasonia : Negative effects of hemizygosity and the identification of transmission ratio distortion loci

NARCIS (Netherlands)

Koevoets, T.; Niehuis, O.; van de Zande, L.; Beukeboom, L. W.

The occurrence of hybrid incompatibilities forms an important stage during the evolution of reproductive isolation. In early stages of speciation, males and females often respond differently to hybridization. Haldane's rule states that the heterogametic sex suffers more from hybridization than the

The Spacetime Memory of Geometric Phases and Quantum Computing

CERN Document Server

Binder, B

2002-01-01

Spacetime memory is defined with a holonomic approach to information processing, where multi-state stability is introduced by a non-linear phase-locked loop. Geometric phases serve as the carrier of physical information and geometric memory (of orientation) given by a path integral measure of curvature that is periodically refreshed. Regarding the resulting spin-orbit coupling and gauge field, the geometric nature of spacetime memory suggests to assign intrinsic computational properties to the electromagnetic field.

Somatic hybridization of sexually incompatible petunias: Petunia parodii, Petunia parviflora.

Science.gov (United States)

Power, J B; Berry, S F; Chapman, J V; Cocking, E C

1980-01-01

Somatic hybrid plants were regenerated following the fusion of leaf mesophyll protoplasts of P. parodii with those isolated from a nuclear-albino mutant of P. parviflora. Attempts at sexual hybridization of these two species repeatedly failed thus confirming their previously established cross-incompatibility. Selection of somatic hybrid plants was possible since protoplasts of P. parodii would not develop beyond the cell colony stage, whilst those of the somatic hybrid and albino P. parviflora produced calluses. Green somatic hybrid calluses were visible against a background of albino cells/calluses, and upon transfer to regeneration media gave rise to shoots. Shoots and the resultant flowering plants were confirmed as somatic hybrids based on their growth habit, floral pigmentation and morphology, leaf hair structure, chromosome number and Fraction 1 protein profiles. The relevance of such hybrid material for the development of new, and extensively modified cultivars, is discussed.

The Name Game.

Science.gov (United States)

Crawley, Sharon J.

Described is a game which provides a method for teaching students to locate cities and towns on a map. Students are provided with a list of descriptive phrases which stand for the name of a city, e.g., hot weather town (Summerville, Georgia); a chocolate candy bar (Hershey, Pennsylvania). Using a map, students must then try to find the name of a…

The geometric semantics of algebraic quantum mechanics.

Science.gov (United States)

Cruz Morales, John Alexander; Zilber, Boris

2015-08-06

In this paper, we will present an ongoing project that aims to use model theory as a suitable mathematical setting for studying the formalism of quantum mechanics. We argue that this approach provides a geometric semantics for such a formalism by means of establishing a (non-commutative) duality between certain algebraic and geometric objects. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Audiovisual communication of object-names improves the spatial accuracy of recalled object-locations in topographic maps.

Science.gov (United States)

Lammert-Siepmann, Nils; Bestgen, Anne-Kathrin; Edler, Dennis; Kuchinke, Lars; Dickmann, Frank

2017-01-01

Knowing the correct location of a specific object learned from a (topographic) map is fundamental for orientation and navigation tasks. Spatial reference systems, such as coordinates or cardinal directions, are helpful tools for any geometric localization of positions that aims to be as exact as possible. Considering modern visualization techniques of multimedia cartography, map elements transferred through the auditory channel can be added easily. Audiovisual approaches have been discussed in the cartographic community for many years. However, the effectiveness of audiovisual map elements for map use has hardly been explored so far. Within an interdisciplinary (cartography-cognitive psychology) research project, it is examined whether map users remember object-locations better if they do not just read the corresponding place names, but also listen to them as voice recordings. This approach is based on the idea that learning object-identities influences learning object-locations, which is crucial for map-reading tasks. The results of an empirical study show that the additional auditory communication of object names not only improves memory for the names (object-identities), but also for the spatial accuracy of their corresponding object-locations. The audiovisual communication of semantic attribute information of a spatial object seems to improve the binding of object-identity and object-location, which enhances the spatial accuracy of object-location memory.

Dynamics in geometrical confinement

CERN Document Server

Kremer, Friedrich

2014-01-01

This book describes the dynamics of low molecular weight and polymeric molecules when they are constrained under conditions of geometrical confinement. It covers geometrical confinement in different dimensionalities: (i) in nanometer thin layers or self supporting films (1-dimensional confinement) (ii) in pores or tubes with nanometric diameters (2-dimensional confinement) (iii) as micelles embedded in matrices (3-dimensional) or as nanodroplets.The dynamics under such conditions have been a much discussed and central topic in the focus of intense worldwide research activities within the last two decades. The present book discusses how the resulting molecular mobility is influenced by the subtle counterbalance between surface effects (typically slowing down molecular dynamics through attractive guest/host interactions) and confinement effects (typically increasing the mobility). It also explains how these influences can be modified and tuned, e.g. through appropriate surface coatings, film thicknesses or pore...

Gravity, a geometrical course

CERN Document Server

Frè, Pietro Giuseppe

2013-01-01

‘Gravity, a Geometrical Course’ presents general relativity (GR) in a systematic and exhaustive way, covering three aspects that are homogenized into a single texture: i) the mathematical, geometrical foundations, exposed in a self consistent contemporary formalism, ii) the main physical, astrophysical and cosmological applications,  updated to the issues of contemporary research and observations, with glimpses on supergravity and superstring theory, iii) the historical development of scientific ideas underlying both the birth of general relativity and its subsequent evolution. The book is divided in two volumes.   Volume One is dedicated to the development of the theory and basic physical applications. It guides the reader from the foundation of special relativity to Einstein field equations, illustrating some basic applications in astrophysics. A detailed  account  of the historical and conceptual development of the theory is combined with the presentation of its mathematical foundations.  Differe...

Feeling-of-knowing for proper names.

Science.gov (United States)

Izaute, Marie; Chambres, Patrick; Larochelle, Serge

2002-12-01

The main objective of the presented study was to study feeling-of-knowing (FOK) in proper name retrieval. Many studies show that FOK can predict performance on a subsequent criterion test. Although feeling-of-knowing studies involve questions about proper names, none make this distinction between proper names and common names. Nevertheless, the specific character of proper names as a unique label referring to a person should allow participants to target precisely the desired verbal label. Our idea here was that the unique character of proper name information should result in more accurate FOK evaluations. In the experiment, participants evaluated feeling-of-knowing for proper and common name descriptions. The study demonstrates that FOK judgments are more accurate for proper names than for common names. The implications of the findings for proper names are briefly discussed in terms of feeling-of-knowing hypotheses.

Exponentiated Lomax Geometric Distribution: Properties and Applications

Directory of Open Access Journals (Sweden)

Amal Soliman Hassan

2017-09-01

Full Text Available In this paper, a new four-parameter lifetime distribution, called the exponentiated Lomax geometric (ELG is introduced. The new lifetime distribution contains the Lomax geometric and exponentiated Pareto geometric as new sub-models. Explicit algebraic formulas of probability density function, survival and hazard functions are derived. Various structural properties of the new model are derived including; quantile function, Re'nyi entropy, moments, probability weighted moments, order statistic, Lorenz and Bonferroni curves. The estimation of the model parameters is performed by maximum likelihood method and inference for a large sample is discussed. The flexibility and potentiality of the new model in comparison with some other distributions are shown via an application to a real data set. We hope that the new model will be an adequate model for applications in various studies.

Our first experiences in applying an original method for removal of ABO-isoagglutinins in ABO-incompatible kidney recipients

Directory of Open Access Journals (Sweden)

Ignjatović Ljiljana

2009-01-01

Full Text Available Background/Aim. Due to improved methods for removal of ABO isoagglutinins and novel immunosuppressive protocols, short and long term outcome in blood group incompatible is similar to blood group compatible kidney transplantation. The aim of this study was to determine the efficacy of our original method for removal of ABO isoagglutinins from the blood in ABO-incompatible kidney allograft recipients. Method. Between 2006 and 2008 twelve patients were transplanted from ABO incompatible living donors. Titers of ABO isoagglutinins were 4-128 (IgG. Immunosuppressive therapy started 14 days before kidney transplantation with rituximab, followed by a triple therapy (prednisone + tacrolimus + mycophenolate mofetil and the first plasma exchange (PE procedure, in which one plasma volume was substituted with albumin and saline on day 7 before transplantation. For selective extracorporeal immunoadsorption, the removed plasma was mixed with donor blood type filtered red blood cells, centrifuged and the supernatant separated and preserved. In the next PE procedure, the removed plasma was replaced with immunoadsorbed plasma, and so on. Titers of ABO agglutinins, renal allograft function and survival were followed-up. Results. The pre-transplant treatment consisting of 1-5 PE procedures and immunosuppressive therapy resulted in target ABO agglutinins titers below 4. During a 10-24 month follow-up three patients had an early acute rejection, one patient acute rejection and hemolytic anemia, two patients surgical complications and one of them lost his graft. In the post-transplant period, the titers of ABO antibodies remained below 4. All the patients had stable kidney allograft function with mean serum creatinine ±SD of 129 ± 45 μmol/l at the end of the study. Conclusion. Our method for removal of ABO antibodies was effective in a limited series of patients and short-term follow-up.

Sudan-decoding generalized geometric Goppa codes

DEFF Research Database (Denmark)

Heydtmann, Agnes Eileen

2003-01-01

Generalized geometric Goppa codes are vector spaces of n-tuples with entries from different extension fields of a ground field. They are derived from evaluating functions similar to conventional geometric Goppa codes, but allowing evaluation in places of arbitrary degree. A decoding scheme...... for these codes based on Sudan's improved algorithm is presented and its error-correcting capacity is analyzed. For the implementation of the algorithm it is necessary that the so-called increasing zero bases of certain spaces of functions are available. A method to obtain such bases is developed....

Geometrical intuition and the learning and teaching of geometry

OpenAIRE

Fujita, Taro; Jones, Keith; Yamamoto, Shinya

2004-01-01

Intuition is often regarded as essential in the learning of geometry, but how such skills might be effectively developed in students remains an open question. This paper reviews the role and importance of geometrical intuition and suggests it involves the skills to create and manipulate geometrical figures in the mind, to see geometrical properties, to relate images to concepts and theorems in geometry, and decide where and how to start when solving problems in geometry. Based on these theore...

Sociocultural Theories, Academic Achievement, and African American Adolescents in a Multicultural Context: A Review of the Cultural Incompatibility Perspective

Science.gov (United States)

Whaley, Arthur L.; Noel, La

2011-01-01

Some theories have posited that African American youth are academic underachievers because of sociocultural factors. We label this point of view the cultural incompatibility perspective. Ogbu's oppositional culture theory and Steele's stereotype threat theory are selected as popular examples of this viewpoint. A critical review of the literature…

A Doctor's Name as a Brand: A Nationwide Survey on Registered Clinic Names in Taiwan.

Science.gov (United States)

Chu, Feng-Yuan; Dai, Ying-Xiu; Liu, Jui-Yao; Chen, Tzeng-Ji; Chou, Li-Fang; Hwang, Shinn-Jang

2018-06-01

In countries where the private clinics of physicians can be freely named, registering a clinic with a physician's name is one way to make patients familiar with the physician. No previous study had investigated how clinics make use of this method of personal branding. Therefore, the current study analyzed 10,847 private physician Western medicine clinics in Taiwan. Of those clinics, 31.0% ( n = 3363) were named with a physician's full name, 8.9% ( n = 960) with a surname, and 8.1% ( n = 884) with a given name. The proportion of clinics registered with a physician's name was lower in rural areas (37.3%) than in urban (48.5%) and suburban areas (49.2%), respectively. Among clinics with only one kind of specialist, a physician's name was used most frequently in clinics of obstetrics and gynecology (64.9%), otorhinolaryngology (64.1%), and dermatology (63.4%). In Taiwan, fewer than half of clinics used a physician's name as a brand. The sociocultural or strategic factors and real benefits of doing so could be further studied in the future for a better understanding of healthcare services management.

The List of Available Names (LAN): A new generation for stable taxonomic names in zoology?

Science.gov (United States)

Alonso-Zarazaga, Miguel A; Fautin, Daphne Gail; Michel, Ellinor

2016-01-01

The List of Available Names in Zoology (LAN) is an inventory of names with specific scope in time and content, presented and approved in parts, and constituted as a cumulative index of names available for use in zoological nomenclature. It was defined in Article 79 in the fourth edition of the International Code of Zoological Nomenclature. The LAN is likely to gain importance with the development of the online Official Registry for Zoological Nomenclature (ZooBank) as it is potentially a source of many nomenclaturally certified names. Article 79 describes the deliberative process for adding large numbers of names to the LAN simultaneously, detailing steps and chronology for submission of a candidate Part to the LAN and consideration of a candidate Part by the public and Commission, but it is largely mute about the contents of a candidate Part. It does make clear that a name within the scope of a Part but not on the LAN has no nomenclatural standing, even if it had previously been considered available, thereby preventing long-forgotten names from displacing accepted ones and the accumulation of nomina dubia. Thus, for taxa on the LAN, nomenclatural archaeology - the resurrecting of old unused names to replace by priority names in current usage - will not be worthwhile. Beyond that, it has been unclear if Article 79 is intended to document every available name known within the scope of the Part, or if its intention is to pare the inventory of available names within the scope of the Part. Consideration by the Commission and two committees to deal with the LAN have defined steps to implement Article 79 with the latter intent. Procedures for consideration of a candidate Part are defined in a manual, published as an appendix in this volume.

Desensitization protocol in highly HLA-sensitized and ABO-incompatible high titer kidney transplantation.

Science.gov (United States)

Uchida, J; Machida, Y; Iwai, T; Naganuma, T; Kitamoto, K; Iguchi, T; Maeda, S; Kamada, Y; Kuwabara, N; Kim, T; Nakatani, T

2010-12-01

A positive crossmatch indicates the presence of donor-specific alloantibodies and is associated with a graft loss rate of >80%; anti-ABO blood group antibodies develop in response to exposure to foreign blood groups, resulting in immediate graft loss. However, a desensitization protocol for highly HLA-sensitized and ABO-incompatible high-titer kidney transplantation has not yet been established. We treated 6 patients with high (≥1:512) anti-A/B antibody titers and 2 highly HLA-sensitized patients. Our immunosuppression protocol was initiated 1 month before surgery and included mycophenolate mofetil (1 g/d) and/or low-dose steroid (methylprednisolone 8 mg/d). Two doses of the anti-CD20 antibody rituximab (150 mg/m(2)) were administered 2 weeks before and on the day of transplantation. We performed antibody removal with 6-12 sessions of plasmapheresis (plasma exchange or double-filtration plasmapheresis) before transplantation. Splenectomy was also performed on the day of transplantation. Postoperative immunosuppression followed the same regimen as ABO-compatible cases, in which calcineurin inhibitors were initiated 3 days before transplantation, combined with 2 doses of basiliximab. Of the 8 patients, 7 subsequently underwent successful living-donor kidney transplantation. Follow-up of our recipients showed that the patient and graft survival rates were 100%. Acute cellular rejection and antibody-mediated rejection episodes occurred in 1 of the 7 recipients. These findings suggest that our immunosuppression regimen consisting of rituximab infusions, splenectomy, plasmapheresis, and pharmacologic immunosuppression may prove to be effective as a desensitization protocol for highly HLA-sensitized and ABO-incompatible high-titer kidney transplantation. Copyright © 2010 Elsevier Inc. All rights reserved.

Implementation and efficiency of two geometric stiffening approaches

International Nuclear Information System (INIS)

Lugris, Urbano; Naya, Miguel A.; Perez, Jose A.; Cuadrado, Javier

2008-01-01

When the modeling of flexible bodies is required in multibody systems, the floating frame of reference formulations are probably the most efficient methods available. In the case of beams undergoing high speed rotations, the geometric stiffening effect can appear due to geometric nonlinearities, and it is often not captured by the aforementioned methods, since it is common to linearize the elastic forces assuming small deformations. The present work discusses the implementation of different existing methods developed to consider such geometric nonlinearities within a floating frame of reference formulation in natural coordinates, making emphasis on the relation between efficiency and accuracy of the resulting algorithms, seeking to provide practical criteria of use

Geometric transitions, flops and non-Kahler manifolds: I

International Nuclear Information System (INIS)

Becker, Melanie; Dasgupta, Keshav; Knauf, Anke; Tatar, Radu

2004-01-01

We construct a duality cycle which provides a complete supergravity description of geometric transitions in type II theories via a flop in M-theory. This cycle connects the different supergravity descriptions before and after the geometric transitions. Our construction reproduces many of the known phenomena studied earlier in the literature and allows us to describe some new and interesting aspects in a simple and elegant fashion. A precise supergravity description of new torsional manifolds that appear on the type IIA side with branes and fluxes and the corresponding geometric transition are obtained. A local description of new G2 manifolds that are circle fibrations over non-Kahler manifolds is presented

Active Learning Environment with Lenses in Geometric Optics

Science.gov (United States)

Tural, Güner

2015-01-01

Geometric optics is one of the difficult topics for students within physics discipline. Students learn better via student-centered active learning environments than the teacher-centered learning environments. So this study aimed to present a guide for middle school teachers to teach lenses in geometric optics via active learning environment…

Color Naming Experiment in Mongolian Language

Directory of Open Access Journals (Sweden)

Nandin-Erdene Osorjamaa

2015-11-01

Full Text Available There are numerous researches on color terms and names in many languages. In Mongolian language there are few doctoral theses on color naming. Cross cultural studies of color naming have demonstrated Semantic relevance in French and Mongolian color name Gerlee Sh. (2000; Comparisons of color naming across English and Mongolian Uranchimeg B. (2004; Semantic comparison between Russian and Mongolian idioms Enhdelger O. (1996; across symbolism Dulam S. (2007 and few others. Also a few articles on color naming by some Mongolian scholars are Tsevel, Ya. (1947, Baldan, L. (1979, Bazarragchaa, M. (1997 and others. Color naming studies are not sufficiently studied in Modern Mongolian. Our research is considered to be the first intended research on color naming in Modern Mongolian, because it is one part of Ph.D dissertation on color naming. There are two color naming categories in Mongolian, basic color terms and non- basic color terms. There are seven basic color terms in Mongolian. This paper aims to consider how Mongolian color names are derived from basic colors by using psycholinguistics associative experiment. It maintains the students and researchers to acquire the specific understanding of the differences and similarities of color naming in Mongolian and  English languages from the psycho-linguistic aspect.

Geometric Representations of Condition Queries on Three-Dimensional Vector Fields

Science.gov (United States)

Henze, Chris

1999-01-01

Condition queries on distributed data ask where particular conditions are satisfied. It is possible to represent condition queries as geometric objects by plotting field data in various spaces derived from the data, and by selecting loci within these derived spaces which signify the desired conditions. Rather simple geometric partitions of derived spaces can represent complex condition queries because much complexity can be encapsulated in the derived space mapping itself A geometric view of condition queries provides a useful conceptual unification, allowing one to intuitively understand many existing vector field feature detection algorithms -- and to design new ones -- as variations on a common theme. A geometric representation of condition queries also provides a simple and coherent basis for computer implementation, reducing a wide variety of existing and potential vector field feature detection techniques to a few simple geometric operations.

Edit propagation using geometric relationship functions

KAUST Repository

Guerrero, Paul; Jeschke, Stefan; Wimmer, Michael; Wonka, Peter

2014-01-01

We propose a method for propagating edit operations in 2D vector graphics, based on geometric relationship functions. These functions quantify the geometric relationship of a point to a polygon, such as the distance to the boundary or the direction to the closest corner vertex. The level sets of the relationship functions describe points with the same relationship to a polygon. For a given query point, we first determine a set of relationships to local features, construct all level sets for these relationships, and accumulate them. The maxima of the resulting distribution are points with similar geometric relationships. We show extensions to handle mirror symmetries, and discuss the use of relationship functions as local coordinate systems. Our method can be applied, for example, to interactive floorplan editing, and it is especially useful for large layouts, where individual edits would be cumbersome. We demonstrate populating 2D layouts with tens to hundreds of objects by propagating relatively few edit operations. © 2014 ACM 0730-0301/2014/03- ART15 $15.00.

Edit propagation using geometric relationship functions

KAUST Repository

Guerrero, Paul

2014-04-15

We propose a method for propagating edit operations in 2D vector graphics, based on geometric relationship functions. These functions quantify the geometric relationship of a point to a polygon, such as the distance to the boundary or the direction to the closest corner vertex. The level sets of the relationship functions describe points with the same relationship to a polygon. For a given query point, we first determine a set of relationships to local features, construct all level sets for these relationships, and accumulate them. The maxima of the resulting distribution are points with similar geometric relationships. We show extensions to handle mirror symmetries, and discuss the use of relationship functions as local coordinate systems. Our method can be applied, for example, to interactive floorplan editing, and it is especially useful for large layouts, where individual edits would be cumbersome. We demonstrate populating 2D layouts with tens to hundreds of objects by propagating relatively few edit operations. © 2014 ACM 0730-0301/2014/03- ART15 $15.00.

Improved vocabulary production after naming therapy in aphasia: can gains in picture naming generalize to connected speech?

Science.gov (United States)

Conroy, Paul; Sage, Karen; Ralph, Matt Lambon

2009-01-01

Naming accuracy for nouns and verbs in aphasia can vary across different elicitation contexts, for example, simple picture naming, composite picture description, narratives, and conversation. For some people with aphasia, naming may be more accurate to simple pictures as opposed to naming in spontaneous, connected speech; for others, the opposite pattern may be evident. These differences have, in some instances, been related to word class (for example, noun or verb) as well as aphasia subtype. Given that the aim of picture-naming therapies is to improve word-finding in general, these differences in naming accuracy across contexts may have important implications for the potential functional benefits of picture-naming therapies. This study aimed to explore single-word therapy for both nouns and verbs, and to answer the following questions. (1) To what extent does an increase in naming accuracy after picture-naming therapy (for both nouns and verbs) predict accurate naming of the same items in less constrained spontaneous connected speech tasks such as composite picture description and retelling of a narrative? (2) Does the word class targeted in therapy (verb or noun) dictate whether there is 'carry-over' of the therapy item to connected speech tasks? (3) Does the speed at which the picture is named after therapy predict whether it will also be used appropriately in connected speech tasks? Seven participants with aphasia of varying degrees of severity and subtype took part in ten therapy sessions over five weeks. A set of potentially useful items was collected from control participant accounts of the Cookie Theft Picture Description and the Cinderella Story from the Quantitative Production Analysis. Twenty-four of these words (twelve verbs and twelve nouns) were collated for each participant, on the basis that they had failed to name them in either simple picture naming or connected speech tasks (picture-supported narrative and unsupported retelling of a narrative

27 CFR 5.34 - Brand names.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Brand names. 5.34 Section... Spirits § 5.34 Brand names. (a) Misleading brand names. No label shall contain any brand name, which... officer finds that such brand name (when appropriately qualified if required) conveys no erroneous...

A GEOMETRICAL HEIGHT SCALE FOR SUNSPOT PENUMBRAE

International Nuclear Information System (INIS)

Puschmann, K. G.; Ruiz Cobo, B.; MartInez Pillet, V.

2010-01-01

Inversions of spectropolarimetric observations of penumbral filaments deliver the stratification of different physical quantities in an optical depth scale. However, without establishing a geometrical height scale, their three-dimensional geometrical structure cannot be derived. This is crucial in understanding the correct spatial variation of physical properties in the penumbral atmosphere and to provide insights into the mechanism capable of explaining the observed penumbral brightness. The aim of this work is to determine a global geometrical height scale in the penumbra by minimizing the divergence of the magnetic field vector and the deviations from static equilibrium as imposed by a force balance equation that includes pressure gradients, gravity, and the Lorentz force. Optical depth models are derived from the inversion of spectropolarimetric data of an active region observed with the Solar Optical Telescope on board the Hinode satellite. We use a genetic algorithm to determine the boundary condition for the inference of geometrical heights. The retrieved geometrical height scale permits the evaluation of the Wilson depression at each pixel and the correlation of physical quantities at each height. Our results fit into the uncombed penumbral scenario, i.e., a penumbra composed of flux tubes with channeled mass flow and with a weaker and more horizontal magnetic field as compared with the background field. The ascending material is hotter and denser than their surroundings. We do not find evidence of overturning convection or field-free regions in the inner penumbral area analyzed. The penumbral brightness can be explained by the energy transfer of the ascending mass carried by the Evershed flow, if the physical quantities below z = -75 km are extrapolated from the results of the inversion.

Simple Y-Autosomal Incompatibilities Cause Hybrid Male Sterility in Reciprocal Crosses Between Drosophila virilis and D. americana

OpenAIRE

Sweigart, Andrea L.

2010-01-01

Postzygotic reproductive isolation evolves when hybrid incompatibilities accumulate between diverging populations. Here, I examine the genetic basis of hybrid male sterility between two species of Drosophila, Drosophila virilis and D. americana. From these analyses, I reach several conclusions. First, neither species carries any autosomal dominant hybrid male sterility alleles: reciprocal F1 hybrid males are perfectly fertile. Second, later generation (backcross and F2) hybrid male sterility ...

Lectures in geometric combinatorics

CERN Document Server

Thomas, Rekha R

2006-01-01

This book presents a course in the geometry of convex polytopes in arbitrary dimension, suitable for an advanced undergraduate or beginning graduate student. The book starts with the basics of polytope theory. Schlegel and Gale diagrams are introduced as geometric tools to visualize polytopes in high dimension and to unearth bizarre phenomena in polytopes. The heart of the book is a treatment of the secondary polytope of a point configuration and its connections to the state polytope of the toric ideal defined by the configuration. These polytopes are relatively recent constructs with numerous connections to discrete geometry, classical algebraic geometry, symplectic geometry, and combinatorics. The connections rely on Gr�bner bases of toric ideals and other methods from commutative algebra. The book is self-contained and does not require any background beyond basic linear algebra. With numerous figures and exercises, it can be used as a textbook for courses on geometric, combinatorial, and computational as...

Geometric information provider platform

Directory of Open Access Journals (Sweden)

Meisam Yousefzadeh

2015-07-01

Full Text Available Renovation of existing buildings is known as an essential stage in reduction of the energy loss. Considerable part of renovation process depends on geometric reconstruction of building based on semantic parameters. Following many research projects which were focused on parameterizing the energy usage, various energy modelling methods were developed during the last decade. On the other hand, by developing accurate measuring tools such as laser scanners, the interests of having accurate 3D building models are rapidly growing. But the automation of 3D building generation from laser point cloud or detection of specific objects in that is still a challenge.  The goal is designing a platform through which required geometric information can be efficiently produced to support energy simulation software. Developing a reliable procedure which extracts required information from measured data and delivers them to a standard energy modelling system is the main purpose of the project.

Can Your Institution's Name Influence Constituent Response? An Initial Assessment of Consumer Response to College Names.

Science.gov (United States)

Treadwell, D. F.

2003-01-01

Presents names of college and universities unfamiliar to potential students. Finds that one cluster of respondents had a clear preference for geographic or aspirational names while a second cluster had a preference for proper names. Notes that there was an overall preference for proper names. (SG)

What’s In Your Name? Associated Meanings of the Common Filipino Names Among Young Filipinos

Directory of Open Access Journals (Sweden)

Shaira G. Castillo

2016-11-01

Full Text Available Name is important in knowing someone’s identity. By a person’s name someone can know his or her character. It is also possible that they bear a particular name because of their background and other factors that can lead to something important. This study aimed to find out the associative meanings of the most common Filipino male and female names among the Polytechnic University of the Philippines-Sta. Mesa students. Different factors such as character traits, physical appearance, and skills/talents were considered in determining meanings of the names. The study used quantitative and qualitative research approach, specifically the descriptive method, to analyze the gathered data. A selfadministered survey was distributed to 400 randomly selected respondents. General findings revealed that the respondents associated the most common Filipino male names in the same way regarding character traits and skills/talents. However, they have different associations to the male names in terms of physical appearance. On the other hand, the respondents associated the most common Filipino female names into similar character traits and physical appearance but associated them with different skills/talents. Results also revealed that the most common factors that influence the respondents’ associated meanings were relationships, experiences, popularity, and perception. The results imply that while young Filipinos associate similar character traits, physical appearances and skills to common Filipino names, they have different reasons in giving meanings to them.

Mixing of incompatible materials in waste tanks technical basis document

International Nuclear Information System (INIS)

SANDGREN, K.R.

2003-01-01

This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process, the technical basis for assigning risk bins, and the controls selected for the mixing of incompatible materials representative accident and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSCs) and/or technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the FR-equency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', as described in this report

What's in a Name ?The Effect of an Artist's Name on Aesthetic Judgements

OpenAIRE

Cleeremans, Axel; Ginsburgh, Victor; Klein, Olivier; Noury, Abdul Ghafar

2016-01-01

Both economists and art historians suggest that the name of the artist is important and belongs with the work. We carried out an experiment to explore the influence that the presence and knowledge of an artist’s name exert on aesthetic judgments. Forty participants (20 students majoring in psychology and 20 in art history) were asked to rank twelve works painted by different artists, some of which bore the name of their actual creators, others not. The results demonstrated that the presence o...

Geometrical methods for power network analysis

Energy Technology Data Exchange (ETDEWEB)

Bellucci, Stefano; Tiwari, Bhupendra Nath [Istituto Nazioneale di Fisica Nucleare, Frascati, Rome (Italy). Lab. Nazionali di Frascati; Gupta, Neeraj [Indian Institute of Technology, Kanpur (India). Dept. of Electrical Engineering

2013-02-01

Uses advanced geometrical methods to analyse power networks. Provides a self-contained and tutorial introduction. Includes a fully worked-out example for the IEEE 5 bus system. This book is a short introduction to power system planning and operation using advanced geometrical methods. The approach is based on well-known insights and techniques developed in theoretical physics in the context of Riemannian manifolds. The proof of principle and robustness of this approach is examined in the context of the IEEE 5 bus system. This work addresses applied mathematicians, theoretical physicists and power engineers interested in novel mathematical approaches to power network theory.

Geometric modular action and transformation groups

International Nuclear Information System (INIS)

Summers, S.J.

1996-01-01

We study a weak form of geometric modular action, which is naturally associated with transformation groups of partially ordered sets and which provides these groups with projective representations. Under suitable conditions it is shown that these groups are implemented by point transformations of topological spaces serving as models for space-times, leading to groups which may be interpreted as symmetry groups of the space-times. As concrete examples, it is shown that the Poincare group and the de Sitter group can be derived from this condition of geometric modular action. Further consequences and examples are discussed. (orig.)

Effect analysis of geometric parameters of floating raft on isolation performance

Directory of Open Access Journals (Sweden)

LI Shangda

2017-12-01

Full Text Available [Objectives] This paper focuses on the effects of the geometric parameters of a floating raft on isolation performance.[Methods] Based on the idea that the weight of a floating raft remains constant, a parametric finite element model is established using geometric parameters, and the effects of the geometric parameters when isolation performance is measured by vibration level difference are discussed.[Results] The effects of the geometric parameters of a floating raft on isolation performance are mainly reflected in the middle and high frequency areas. The most important geometric parameters which have an impact on isolation performance are the raft's height, length to width ratio and number of ribs. Adjusting the geometric parameters of the raft is one effective way to avoid the vibration frequency of mechanical equipment.[Conclusions] This paper has some practical value for the engineering design of floating raft isolation systems.

Fictional names and fictional discourse

OpenAIRE

Panizza, Chiara

2017-01-01

[eng] In this dissertation I present a critical study of fiction, focusing on the semantics of fictional names and fictional discourse. I am concerned with the issue of whether fictional names need to refer, and also with the related issue of whether fictional characters need to exist, in order to best account for our linguistic practices involving fictional names. Fictional names like ‘Sherlock Holmes’, ‘Anna Karenina’, ‘Emma Woodhouse’ and ‘Don Quixote of La Mancha’ ordinarily occur in diff...

Multiscale geometric modeling of macromolecules I: Cartesian representation

Science.gov (United States)

Xia, Kelin; Feng, Xin; Chen, Zhan; Tong, Yiying; Wei, Guo-Wei

2014-01-01

This paper focuses on the geometric modeling and computational algorithm development of biomolecular structures from two data sources: Protein Data Bank (PDB) and Electron Microscopy Data Bank (EMDB) in the Eulerian (or Cartesian) representation. Molecular surface (MS) contains non-smooth geometric singularities, such as cusps, tips and self-intersecting facets, which often lead to computational instabilities in molecular simulations, and violate the physical principle of surface free energy minimization. Variational multiscale surface definitions are proposed based on geometric flows and solvation analysis of biomolecular systems. Our approach leads to geometric and potential driven Laplace-Beltrami flows for biomolecular surface evolution and formation. The resulting surfaces are free of geometric singularities and minimize the total free energy of the biomolecular system. High order partial differential equation (PDE)-based nonlinear filters are employed for EMDB data processing. We show the efficacy of this approach in feature-preserving noise reduction. After the construction of protein multiresolution surfaces, we explore the analysis and characterization of surface morphology by using a variety of curvature definitions. Apart from the classical Gaussian curvature and mean curvature, maximum curvature, minimum curvature, shape index, and curvedness are also applied to macromolecular surface analysis for the first time. Our curvature analysis is uniquely coupled to the analysis of electrostatic surface potential, which is a by-product of our variational multiscale solvation models. As an expository investigation, we particularly emphasize the numerical algorithms and computational protocols for practical applications of the above multiscale geometric models. Such information may otherwise be scattered over the vast literature on this topic. Based on the curvature and electrostatic analysis from our multiresolution surfaces, we introduce a new concept, the

Multiscale geometric modeling of macromolecules I: Cartesian representation

Energy Technology Data Exchange (ETDEWEB)

Xia, Kelin [Department of Mathematics, Michigan State University, MI 48824 (United States); Feng, Xin [Department of Computer Science and Engineering, Michigan State University, MI 48824 (United States); Chen, Zhan [Department of Mathematics, Michigan State University, MI 48824 (United States); Tong, Yiying [Department of Computer Science and Engineering, Michigan State University, MI 48824 (United States); Wei, Guo-Wei, E-mail: wei@math.msu.edu [Department of Mathematics, Michigan State University, MI 48824 (United States); Department of Biochemistry and Molecular Biology, Michigan State University, MI 48824 (United States)

2014-01-15

This paper focuses on the geometric modeling and computational algorithm development of biomolecular structures from two data sources: Protein Data Bank (PDB) and Electron Microscopy Data Bank (EMDB) in the Eulerian (or Cartesian) representation. Molecular surface (MS) contains non-smooth geometric singularities, such as cusps, tips and self-intersecting facets, which often lead to computational instabilities in molecular simulations, and violate the physical principle of surface free energy minimization. Variational multiscale surface definitions are proposed based on geometric flows and solvation analysis of biomolecular systems. Our approach leads to geometric and potential driven Laplace–Beltrami flows for biomolecular surface evolution and formation. The resulting surfaces are free of geometric singularities and minimize the total free energy of the biomolecular system. High order partial differential equation (PDE)-based nonlinear filters are employed for EMDB data processing. We show the efficacy of this approach in feature-preserving noise reduction. After the construction of protein multiresolution surfaces, we explore the analysis and characterization of surface morphology by using a variety of curvature definitions. Apart from the classical Gaussian curvature and mean curvature, maximum curvature, minimum curvature, shape index, and curvedness are also applied to macromolecular surface analysis for the first time. Our curvature analysis is uniquely coupled to the analysis of electrostatic surface potential, which is a by-product of our variational multiscale solvation models. As an expository investigation, we particularly emphasize the numerical algorithms and computational protocols for practical applications of the above multiscale geometric models. Such information may otherwise be scattered over the vast literature on this topic. Based on the curvature and electrostatic analysis from our multiresolution surfaces, we introduce a new concept, the

Geometric Aspects of Quantum Mechanics and Quantum Entanglement

International Nuclear Information System (INIS)

Chruscinski, Dariusz

2006-01-01

It is shown that the standard non-relativistic Quantum Mechanics gives rise to elegant and rich geometrical structures. The space of quantum states is endowed with nontrivial Fubini-Study metric which is responsible for the 'peculiarities' of the quantum world. We show that there is also intricate connection between geometrical structures and quantum entanglement

Can You Say My Name?

DEFF Research Database (Denmark)

Erz, Antonia; Christensen, Bo T.

Whereas brand name research has focused on the semantic meaning or sounds of names, processing fluency lends further support to the idea that meaning goes beyond semantics. Extant research has shown that phonological fluency, i.e., the ease or difficulty with which people pronounce names, can...

Geometric mean for subspace selection.

Science.gov (United States)

Tao, Dacheng; Li, Xuelong; Wu, Xindong; Maybank, Stephen J

2009-02-01

Subspace selection approaches are powerful tools in pattern classification and data visualization. One of the most important subspace approaches is the linear dimensionality reduction step in the Fisher's linear discriminant analysis (FLDA), which has been successfully employed in many fields such as biometrics, bioinformatics, and multimedia information management. However, the linear dimensionality reduction step in FLDA has a critical drawback: for a classification task with c classes, if the dimension of the projected subspace is strictly lower than c - 1, the projection to a subspace tends to merge those classes, which are close together in the original feature space. If separate classes are sampled from Gaussian distributions, all with identical covariance matrices, then the linear dimensionality reduction step in FLDA maximizes the mean value of the Kullback-Leibler (KL) divergences between different classes. Based on this viewpoint, the geometric mean for subspace selection is studied in this paper. Three criteria are analyzed: 1) maximization of the geometric mean of the KL divergences, 2) maximization of the geometric mean of the normalized KL divergences, and 3) the combination of 1 and 2. Preliminary experimental results based on synthetic data, UCI Machine Learning Repository, and handwriting digits show that the third criterion is a potential discriminative subspace selection method, which significantly reduces the class separation problem in comparing with the linear dimensionality reduction step in FLDA and its several representative extensions.

27 CFR 7.23 - Brand names.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Brand names. 7.23 Section... Beverages § 7.23 Brand names. (a) General. The product shall bear a brand name, except that if not sold under a brand name, then the name of the person required to appear on the brand label shall be deemed a...

Brand Reputation and the Cost of Capital: Evidence of Adopting a Brand Name as the Corporate Name

OpenAIRE

YiLin Wu

2011-01-01

This paper studies how the capital market perceives brand name adoption. I distinguish between brand adoption and radical type of corporate name change. A brand adoption name change occurs when the firm adopts one of its well-established brands as its new corporate name and a radical type occurs when the new name is semantically unrelated to firm history. Improved profitability and increased net investment accompany brand name adoption. After controlling for changes in the competing informati...

Experimental realization of universal geometric quantum gates with solid-state spins.

Science.gov (United States)

Zu, C; Wang, W-B; He, L; Zhang, W-G; Dai, C-Y; Wang, F; Duan, L-M

2014-10-02

Experimental realization of a universal set of quantum logic gates is the central requirement for the implementation of a quantum computer. In an 'all-geometric' approach to quantum computation, the quantum gates are implemented using Berry phases and their non-Abelian extensions, holonomies, from geometric transformation of quantum states in the Hilbert space. Apart from its fundamental interest and rich mathematical structure, the geometric approach has some built-in noise-resilience features. On the experimental side, geometric phases and holonomies have been observed in thermal ensembles of liquid molecules using nuclear magnetic resonance; however, such systems are known to be non-scalable for the purposes of quantum computing. There are proposals to implement geometric quantum computation in scalable experimental platforms such as trapped ions, superconducting quantum bits and quantum dots, and a recent experiment has realized geometric single-bit gates in a superconducting system. Here we report the experimental realization of a universal set of geometric quantum gates using the solid-state spins of diamond nitrogen-vacancy centres. These diamond defects provide a scalable experimental platform with the potential for room-temperature quantum computing, which has attracted strong interest in recent years. Our experiment shows that all-geometric and potentially robust quantum computation can be realized with solid-state spin quantum bits, making use of recent advances in the coherent control of this system.

An information geometric approach to least squares minimization

Science.gov (United States)

Transtrum, Mark; Machta, Benjamin; Sethna, James

2009-03-01

Parameter estimation by nonlinear least squares minimization is a ubiquitous problem that has an elegant geometric interpretation: all possible parameter values induce a manifold embedded within the space of data. The minimization problem is then to find the point on the manifold closest to the origin. The standard algorithm for minimizing sums of squares, the Levenberg-Marquardt algorithm, also has geometric meaning. When the standard algorithm fails to efficiently find accurate fits to the data, geometric considerations suggest improvements. Problems involving large numbers of parameters, such as often arise in biological contexts, are notoriously difficult. We suggest an algorithm based on geodesic motion that may offer improvements over the standard algorithm for a certain class of problems.

Uhlmann's geometric phase in presence of isotropic decoherence

International Nuclear Information System (INIS)

Tidstroem, Jonas; Sjoeqvist, Erik

2003-01-01

Uhlmann's mixed state geometric phase [Rep. Math. Phys. 24, 229 (1986)] is analyzed in the case of a qubit affected by isotropic decoherence treated in the Markovian approximation. It is demonstrated that this phase decreases rapidly with increasing decoherence rate and that it is most fragile to weak decoherence for pure or nearly pure initial states. In the unitary case, we compare Uhlmann's geometric phase for mixed states with that occurring in standard Mach-Zehnder interferometry [Phys. Rev. Lett. 85, 2845 (2000)] and show that the latter is more robust to reduction in the length of the Bloch vector. We also describe how Uhlmann's geometric phase in the present case could in principle be realized experimentally

Geometrical optics in general relativity

OpenAIRE

Loinger, A.

2006-01-01

General relativity includes geometrical optics. This basic fact has relevant consequences that concern the physical meaning of the discontinuity surfaces propagated in the gravitational field - as it was first emphasized by Levi-Civita.

A new approach to estimate the geometrical factors, solid angle approximation, geometrical efficiency and their use in basic interaction cross section measurements

CERN Document Server

Rao, D V; Brunetti, A; Gigante, G E; Takeda, T; Itai, Y; Akatsuka, T

2002-01-01

A new approach is developed to estimate the geometrical factors, solid angle approximation and geometrical efficiency for a system with experimental arrangements using X-ray tube and secondary target as an excitation source in order to produce the nearly monoenergetic K alpha radiation to excite the sample. The variation of the solid angle is studied by changing the radius and length of the collimators towards and away from the source and sample. From these values the variation of the total solid angle and geometrical efficiency is deduced and the optimum value is used for the experimental work. (authors)

A new approach to estimate the geometrical factors, solid angle approximation, geometrical efficiency and their use in basic interaction cross section measurements

Energy Technology Data Exchange (ETDEWEB)

Rao, D.V.; Cesareo, R.; Brunetti, A. [Sassari University, Istituto di Matematica e Fisica (Italy); Gigante, G.E. [Roma Universita, Dipt. di Fisica (Italy); Takeda, T.; Itai, Y. [Tsukuba Univ., Ibaraki (Japan). Inst. of Clinical Medicine; Akatsuka, T. [Yamagata Univ., Yonezawa (Japan). Faculty of Engineering

2002-10-01

A new approach is developed to estimate the geometrical factors, solid angle approximation and geometrical efficiency for a system with experimental arrangements using X-ray tube and secondary target as an excitation source in order to produce the nearly monoenergetic K{alpha} radiation to excite the sample. The variation of the solid angle is studied by changing the radius and length of the collimators towards and away from the source and sample. From these values the variation of the total solid angle and geometrical efficiency is deduced and the optimum value is used for the experimental work. (authors)

A new approach to estimate the geometrical factors, solid angle approximation, geometrical efficiency and their use in basic interaction cross section measurements

Science.gov (United States)

Rao, D. V.; Cesareo, R.; Brunetti, A.; Gigante, G. E.; Takeda, T.; Itai, Y.; Akatsuka, T.

2002-10-01

A new approach is developed to estimate the geometrical factors, solid angle approximation and geometrical efficiency for a system with experimental arrangements using X-ray tube and secondary target as an excitation source in order to produce the nearly monoenergetic Kα radiation to excite the sample. The variation of the solid angle is studied by changing the radius and length of the collimators towards and away from the source and sample. From these values the variation of the total solid angle and geometrical efficiency is deduced and the optimum value is used for the experimental work.

Ultra advanced projects. ; Naming hyper-hightech projects. (Cho) no tsuku project. ; Naming no shikumi

Energy Technology Data Exchange (ETDEWEB)

Goto, Y. (Ministry of International Trade and Industry, Tokyo (Japan))

1992-10-05

Significance of using 'super' for naming a project of technological development is discussed. Functions of naming are classified into (1) recognition, (2) display and (3) sales-promotion, whereby mechanism of naming of merchandise that is developed through the technique of 3 is considered. Further, the mechanism of naming is discussed in relation to marketing. It is pointed out that naming of merchandise is determined on the basis of (1) concept of planned goods and (2) marketing-mixes composed of goods, price, sales-roots and sales-promotion. The same mechanism works also in a project for technological development. Technical trends are caught and projects are targetted by taking supposed regimes into account, thereby the most suitable mix is formed. The mix in the technological development is assumed to be composed of purpose, specification, regime and sales-promotion. Two examples of the governmental projects by Ministry of International Trade and Industry, 'the big regime for research and development on industrial technologies' and 'the regime for development of the fundamental technologies in the next generation' are introduced and the significance of their naming is described. 2 tabs.

Cognitive components of picture naming.

Science.gov (United States)

Johnson, C J; Paivio, A; Clark, J M

1996-07-01

A substantial research literature documents the effects of diverse item attributes, task conditions, and participant characteristics on the case of picture naming. The authors review what the research has revealed about 3 generally accepted stages of naming a pictured object: object identification, name activation, and response generation. They also show that dual coding theory gives a coherent and plausible account of these findings without positing amodal conceptual representations, and they identify issues and methods that may further advance the understanding of picture naming and related cognitive tasks.

Delayed hyperacute rejection in a patient who developed clostridium difficile infection after ABO-incompatible kidney transplantation

Directory of Open Access Journals (Sweden)

Gerald S Lipshutz

2010-11-01

Full Text Available Gerald S Lipshutz1, Elaine F Reed2, Phuong-Chi Pham3, Jeffrey M Miller4, Jennifer S Singer5, Gabriel M Danovitch6, Alan H Wilkinson6, Dean W Wallace7, Suzanne McGuire6, Phuong-Truc Pham8, Phuong-Thu Pham61Department of Surgery, Kidney and Pancreas Transplant Program, David Geffen School of Medicine at UCLA, Los Angeles, CA, USA; 2Department of Pathology and Laboratory Medicine-Immunogenetics, David Geffen School of Medicine at UCLA, Los Angeles, CA, USA; 3Department of Medicine, Nephrology Division, UCLA-Olive View Medical Center, David Geffen School of Medicine at UCLA, Los Angeles, CA, USA; 4Department of Medicine, Hematology Oncology Division, UCLA-Olive View Medical Center, David Geffen School of Medicine at UCLA, Los Angeles, CA, USA; 5Department of Surgery and Urology, Kidney and Pancreas Transplant Program, 6Department of Medicine, Nephrology Division, Kidney and Pancreas Transplant Program, David Geffen School of Medicine at UCLA, Los Angeles, CA, USA; 7Department of Pathology and Laboratory Medicine, David Geffen School of Medicine at UCLA, Los Angeles, CA, USA; 8Department of Science, Penn State University, Worthington-Scranton, Dunmore, PA, USAAbstract: Over the past decade ABO incompatible transplantation has emerged as an important potential source for increasing living kidney transplantation in selected transplant centers. Early reports suggest that patients who have elevated serum anti-blood group antibody titers (anti-A/B before transplantation and a rebound antibody production after antibody removal may be at high immunological risk. With currently available immune modulation protocols and immunosuppressive therapy, excellent short- and long-term patient and graft survival rates have been achieved even in those with high anti-A/B antibody titers before plasmapheresis or immunoadsorption. Nonetheless, acute infection with an organism possessing surface markers analogous to blood group antigens such as carbohydrate structures on

Analysis of Geometric Thinking Students’ and Process-Guided Inquiry Learning Model

Science.gov (United States)

Hardianti, D.; Priatna, N.; Priatna, B. A.

2017-09-01

This research aims to analysis students’ geometric thinking ability and theoretically examine the process-oriented guided iquiry (POGIL) model. This study uses qualitative approach with descriptive method because this research was done without any treatment on subjects. Data were collected naturally. This study was conducted in one of the State Junior High School in Bandung. The population was second grade students and the sample was 32 students. Data of students’ geometric thinking ability were collected through geometric thinking test. These questions are made based on the characteristics of geometry thinking based on van hiele’s theory. Based on the results of the analysis and discussion, students’ geometric thinking ability is still low so it needs to be improved. Therefore, an effort is needed to overcome the problems related to students’ geometric thinking ability. One of the efforts that can be done by doing the learning that can facilitate the students to construct their own geometry concept, especially quadrilateral’s concepts so that students’ geometric thinking ability can enhance maximally. Based on study of the theory, one of the learning models that can enhance the students’ geometric thinking ability is POGIL model.

A new Weyl-like tensor of geometric origin

Science.gov (United States)

Vishwakarma, Ram Gopal

2018-04-01

A set of new tensors of purely geometric origin have been investigated, which form a hierarchy. A tensor of a lower rank plays the role of the potential for the tensor of one rank higher. The tensors have interesting mathematical and physical properties. The highest rank tensor of the hierarchy possesses all the geometrical properties of the Weyl tensor.

MM Algorithms for Geometric and Signomial Programming.

Science.gov (United States)

Lange, Kenneth; Zhou, Hua

2014-02-01

This paper derives new algorithms for signomial programming, a generalization of geometric programming. The algorithms are based on a generic principle for optimization called the MM algorithm. In this setting, one can apply the geometric-arithmetic mean inequality and a supporting hyperplane inequality to create a surrogate function with parameters separated. Thus, unconstrained signomial programming reduces to a sequence of one-dimensional minimization problems. Simple examples demonstrate that the MM algorithm derived can converge to a boundary point or to one point of a continuum of minimum points. Conditions under which the minimum point is unique or occurs in the interior of parameter space are proved for geometric programming. Convergence to an interior point occurs at a linear rate. Finally, the MM framework easily accommodates equality and inequality constraints of signomial type. For the most important special case, constrained quadratic programming, the MM algorithm involves very simple updates.

Geometric Rationalization for Freeform Architecture

KAUST Repository

Jiang, Caigui

2016-01-01

The emergence of freeform architecture provides interesting geometric challenges with regards to the design and manufacturing of large-scale structures. To design these architectural structures, we have to consider two types of constraints. First

Geometrical approach to tumor growth.

Science.gov (United States)

Escudero, Carlos

2006-08-01

Tumor growth has a number of features in common with a physical process known as molecular beam epitaxy. Both growth processes are characterized by the constraint of growth development to the body border, and surface diffusion of cells and particles at the growing edge. However, tumor growth implies an approximate spherical symmetry that makes necessary a geometrical treatment of the growth equations. The basic model was introduced in a former paper [C. Escudero, Phys. Rev. E 73, 020902(R) (2006)], and in the present work we extend our analysis and try to shed light on the possible geometrical principles that drive tumor growth. We present two-dimensional models that reproduce the experimental observations, and analyze the unexplored three-dimensional case, for which interesting conclusions on tumor growth are derived.

Wolbachia age-sex-specific density in Aedes albopictus: a host evolutionary response to cytoplasmic incompatibility?

Directory of Open Access Journals (Sweden)

Pablo Tortosa

2010-03-01

Full Text Available Wolbachia bacteria have invaded many arthropod species by inducing Cytoplasmic Incompatibility (CI. These symbionts represent fascinating objects of study for evolutionary biologists, but also powerful potential biocontrol agents. Here, we assess the density dynamics of Wolbachia infections in males and females of the mosquito Aedes albopitcus, an important vector of human pathogens, and interpret the results within an evolutionary framework.Wolbachia densities were measured in natural populations and in age controlled mosquitoes using quantitative PCR. We show that the density dynamics of the wAlbA Wolbachia strain infecting Aedes albopictus drastically differ between males and females, with a very rapid decay of infection in males only.Theory predicts that Wolbachia and its hosts should cooperate to improve the transmission of infection to offspring, because only infected eggs are protected from the effects of CI. However, incompatible matings effectively lower the fertility of infected males, so that selection acting on the host genome should tend to reduce the expression of CI in males, for example, by reducing infection density in males before sexual maturation. The rapid decay of one Wolbachia infection in Aedes albopictus males, but not in females, is consistent with this prediction. We suggest that the commonly observed reduction in CI intensity with male age reflects a similar evolutionary process. Our results also highlight the importance of monitoring infection density dynamics in both males and females to assess the efficiency of Wolbachia-based control strategies.

Incompatible blood transfusion: Challenging yet lifesaving in the management of acute severe autoimmune hemolytic anemia

Directory of Open Access Journals (Sweden)

Sudipta Sekhar Das

2014-01-01

Full Text Available Background and Aim: Autoimmune hemolytic anemia (AIHA is characterized by the production of autoantibodies directed against red cell antigens. Most patients of AIHA arrive in the emergency or out-patient department (OPD with severe anemia requiring urgent blood transfusion. Here we share our experience of managing these patients with incompatible blood transfusions and suggest the minimal test required to assure patient safety. Materials and Methods: A total of 14 patients admitted with severe anemia, diagnosed with AIHA and requiring blood transfusion urgently were included in the study. A series of immunohematological investigations were performed to confirm the diagnosis and issue "best match" packed red blood cells (PRBC to these patients. Results: A total of 167 PRBC units were crossmatched for 14 patients of which 46 units (28% were found to be best match ones and 26 (56.5% of these units were transfused. A mean turn around time of 222 min was observed in issuing the ′best match′ blood. Severe hemolysis was observed in all patients with a median hemoglobin increment of 0.88 g/dl after each unit PRBC transfusion. Conclusion: Decision to transfuse in AIHA should be based on the clinical condition of the patient. No critical patient should be denied blood transfusion due to serological incompatibility. Minimum investigations such as direct antiglobulin test (DAT, antibody screening and autocontrol should be performed to ensure transfusion safety in patients. All transfusion services should be capable of issuing "best match" PRBCs in AIHA.

Incompatible blood transfusion: Challenging yet lifesaving in the management of acute severe autoimmune hemolytic anemia.

Science.gov (United States)

Das, Sudipta Sekhar; Zaman, Rafiq Uz; Safi, Mohammad

2014-07-01

Autoimmune hemolytic anemia (AIHA) is characterized by the production of autoantibodies directed against red cell antigens. Most patients of AIHA arrive in the emergency or out-patient department (OPD) with severe anemia requiring urgent blood transfusion. Here we share our experience of managing these patients with incompatible blood transfusions and suggest the minimal test required to assure patient safety. A total of 14 patients admitted with severe anemia, diagnosed with AIHA and requiring blood transfusion urgently were included in the study. A series of immunohematological investigations were performed to confirm the diagnosis and issue best match packed red blood cells (PRBC) to these patients. A total of 167 PRBC units were crossmatched for 14 patients of which 46 units (28%) were found to be best match ones and 26 (56.5%) of these units were transfused. A mean turn around time of 222 min was observed in issuing the "best match" blood. Severe hemolysis was observed in all patients with a median hemoglobin increment of 0.88 g/dl after each unit PRBC transfusion. Decision to transfuse in AIHA should be based on the clinical condition of the patient. No critical patient should be denied blood transfusion due to serological incompatibility. Minimum investigations such as direct antiglobulin test (DAT), antibody screening and autocontrol should be performed to ensure transfusion safety in patients. All transfusion services should be capable of issuing "best match" PRBCs in AIHA.

Einstein-Podolsky-Rosen steering: Its geometric quantification and witness

Science.gov (United States)

Ku, Huan-Yu; Chen, Shin-Liang; Budroni, Costantino; Miranowicz, Adam; Chen, Yueh-Nan; Nori, Franco

2018-02-01

We propose a measure of quantum steerability, namely, a convex steering monotone, based on the trace distance between a given assemblage and its corresponding closest assemblage admitting a local-hidden-state (LHS) model. We provide methods to estimate such a quantity, via lower and upper bounds, based on semidefinite programming. One of these upper bounds has a clear geometrical interpretation as a linear function of rescaled Euclidean distances in the Bloch sphere between the normalized quantum states of (i) a given assemblage and (ii) an LHS assemblage. For a qubit-qubit quantum state, these ideas also allow us to visualize various steerability properties of the state in the Bloch sphere via the so-called LHS surface. In particular, some steerability properties can be obtained by comparing such an LHS surface with a corresponding quantum steering ellipsoid. Thus, we propose a witness of steerability corresponding to the difference of the volumes enclosed by these two surfaces. This witness (which reveals the steerability of a quantum state) enables one to find an optimal measurement basis, which can then be used to determine the proposed steering monotone (which describes the steerability of an assemblage) optimized over all mutually unbiased bases.

Geometric phase effects in ultracold chemistry

Science.gov (United States)

Hazra, Jisha; Naduvalath, Balakrishnan; Kendrick, Brian K.

2016-05-01

In molecules, the geometric phase, also known as Berry's phase, originates from the adiabatic transport of the electronic wavefunction when the nuclei follow a closed path encircling a conical intersection between two electronic potential energy surfaces. It is demonstrated that the inclusion of the geometric phase has an important effect on ultracold chemical reaction rates. The effect appears in rotationally and vibrationally resolved integral cross sections as well as cross sections summed over all product quantum states. It arises from interference between scattering amplitudes of two reaction pathways: a direct path and a looping path that encircle the conical intersection between the two lowest adiabatic electronic potential energy surfaces. Illustrative results are presented for the O+ OH --> H+ O2 reaction and for hydrogen exchange in H+ H2 and D+HD reactions. It is also qualitatively demonstrated that the geometric phase effect can be modulated by applying an external electric field allowing the possibility of quantum control of chemical reactions in the ultracold regime. This work was supported in part by NSF Grant PHY-1505557 (N.B.) and ARO MURI Grant No. W911NF-12-1-0476 (N.B.).

Geometric transitions on non-Kaehler manifolds

International Nuclear Information System (INIS)

Knauf, A.

2007-01-01

We study geometric transitions on the supergravity level using the basic idea of an earlier paper (M. Becker et al., 2004), where a pair of non-Kaehler backgrounds was constructed, which are related by a geometric transition. Here we embed this idea into an orientifold setup. The non-Kaehler backgrounds we obtain in type IIA are non-trivially fibered due to their construction from IIB via T-duality with Neveu-Schwarz flux. We demonstrate that these non-Kaehler manifolds are not half-flat and show that a symplectic structure exists on them at least locally. We also review the construction of new non-Kaehler backgrounds in type I and heterotic theory. They are found by a series of T- and S-duality and can be argued to be related by geometric transitions as well. A local toy model is provided that fulfills the flux equations of motion in IIB and the torsional relation in heterotic theory, and that is consistent with the U-duality relating both theories. For the heterotic theory we also propose a global solution that fulfills the torsional relation because it is similar to the Maldacena-Nunez background. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

Experimental Study of Vibration Isolation Characteristics of a Geometric Anti-Spring Isolator

Directory of Open Access Journals (Sweden)

Lixun Yan

2017-07-01

Full Text Available In order to realize low-frequency vibration isolation, a novel geometric anti-spring isolator consisting of several cantilever blade springs are developed in this paper. The optimal design parameters of the geometric anti-spring isolator for different nonlinear geometric parameters are theoretically obtained. The transmissibility characteristic of the geometric anti-spring isolator is investigated through mathematical simulation. A geometric anti-spring isolator with a nonlinear geometric parameter of 0.92 is designed and its vibration isolation performance and nonlinearity characteristic is experimentally studied. The experiment results show that the designed isolator has good low-frequency vibration isolation performance, of which the initial isolation frequency is less than 3.6 Hz when the load weight is 21 kg. The jump phenomena of the response of the isolator under linear frequency sweep excitation are observed, and this result demonstrates that the geometric anti-spring isolator has a complex nonlinearity characteristics with the increment of excitation amplitude. This research work provides a theoretical and experimental basis for the application of the nonlinear geometric anti-spring low-frequency passive vibration isolation technology in engineering practice.

A Doctor’s Name as a Brand: A Nationwide Survey on Registered Clinic Names in Taiwan

Directory of Open Access Journals (Sweden)

Feng-Yuan Chu

2018-06-01

Full Text Available In countries where the private clinics of physicians can be freely named, registering a clinic with a physician’s name is one way to make patients familiar with the physician. No previous study had investigated how clinics make use of this method of personal branding. Therefore, the current study analyzed 10,847 private physician Western medicine clinics in Taiwan. Of those clinics, 31.0% (n = 3363 were named with a physician’s full name, 8.9% (n = 960 with a surname, and 8.1% (n = 884 with a given name. The proportion of clinics registered with a physician’s name was lower in rural areas (37.3% than in urban (48.5% and suburban areas (49.2%, respectively. Among clinics with only one kind of specialist, a physician’s name was used most frequently in clinics of obstetrics and gynecology (64.9%, otorhinolaryngology (64.1%, and dermatology (63.4%. In Taiwan, fewer than half of clinics used a physician’s name as a brand. The sociocultural or strategic factors and real benefits of doing so could be further studied in the future for a better understanding of healthcare services management.

The geometric phase in quantum physics

International Nuclear Information System (INIS)

Bohm, A.

1993-03-01

After an explanatory introduction, a quantum system in a classical time-dependent environment is discussed; an example is a magnetic moment in a classical magnetic field. At first, the general abelian case is discussed in the adiabatic approximation. Then the geometric phase for nonadiabatic change of the environment (Anandan--Aharonov phase) is introduced, and after that general cyclic (nonadiabatic) evolution is discussed. The mathematics of fiber bundles is introduced, and some of its results are used to describe the relation between the adiabatic Berry phase and the geometric phase for general cyclic evolution of a pure state. The discussion is restricted to the abelian, U(1) phase

Spherical projections and liftings in geometric tomography

DEFF Research Database (Denmark)

Goodey, Paul; Kiderlen, Markus; Weil, Wolfgang

2011-01-01

We consider a variety of integral transforms arising in Geometric Tomography. It will be shown that these can be put into a common framework using spherical projection and lifting operators. These operators will be applied to support functions and surface area measures of convex bodies and to rad......We consider a variety of integral transforms arising in Geometric Tomography. It will be shown that these can be put into a common framework using spherical projection and lifting operators. These operators will be applied to support functions and surface area measures of convex bodies...... and to radial functions of star bodies. We then investigate averages of lifted projections and show that they correspond to self-adjoint intertwining operators. We obtain formulas for the eigenvalues of these operators and use them to ascertain circumstances under which tomographic measurements determine...... the original bodies. This approach via mean lifted projections leads us to some unexpected relationships between seemingly disparate geometric constructions....

Naming analog clocks conceptually facilitates naming digital clocks

NARCIS (Netherlands)

Meeuwissen, M.H.W.; Roelofs, A.P.A.; Levelt, W.J.M.

2004-01-01

Naming digital clocks (e.g., 2:45, say "quarter to three") requires conceptual operations on the minute and hour information displayed in the input for producing the correct relative time expression. The interplay of these conceptual operations was investigated using a repetition priming paradigm.

A Geometric Dissection Problem

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 7; Issue 7. A Geometric Dissection Problem. M N Deshpande. Think It Over Volume 7 Issue 7 July 2002 pp 91-91. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/007/07/0091-0091. Author Affiliations.

Geometric Series via Probability

Science.gov (United States)

Tesman, Barry

2012-01-01

Infinite series is a challenging topic in the undergraduate mathematics curriculum for many students. In fact, there is a vast literature in mathematics education research on convergence issues. One of the most important types of infinite series is the geometric series. Their beauty lies in the fact that they can be evaluated explicitly and that…

Desensitization with plasmapheresis and anti-Cd20 for ABO incompatible kidney transplantation from living donor: experience of a single center in Italy.

Science.gov (United States)

Silvestre, C; Furian, L; Marson, P; Tison, T; Valente, M; Marchini, F; Rossi, B; Bonfante, L; Valerio, F; Cozzi, E; Rigotti, P

2014-09-01

Blood group incompatibility in kidney transplants from a living donor can be successfully overcome by using various desensitization protocols: intravenous immunoglobulin, plasmapheresis (PP), immunoadsorption, and double filtration PP. From July 2010 to October 2013, we performed 10 ABO incompatible kidney transplantation (KT) procedures from a living donor. The desensitization protocol was based on rituximab and PP+cytomegalovirus immune globulin. All patients received induction with basiliximab, except 1 case treated with Thymoglobuline® (ATG) for the simultaneous presence of donor-specific antibody. Tacrolimus and mycophenolate mofetil were initiated at the time of desensitization and continued after the transplant. After a mean follow-up of 11.6±10.4 months, all patients are alive with a functioning graft. The mean serum creatinine concentration at 1 month, 3 months, 6 months, and 1 year was 1.48±0.29, 1.47±0.18, 1.47±0.27, and 1.5±0.27 mg/dl. Three episodes of acute cellular rejection occurred in 2 patients. There was only 1 case of BK virus infection, treated with reduction of immunosuppressive therapy. The protocol biopsy specimens at 1, 3, and 6 months were C4d positive in the absence of acute rejection. Desensitization with rituximab, PP, and anti-cytomegalovirus immune globulin allowed us to perform transplants from living donors to ABO incompatible recipients with excellent results and reduced costs. Copyright © 2014 Elsevier Inc. All rights reserved.

Geometric phases in astigmatic optical modes of arbitrary order

International Nuclear Information System (INIS)

Habraken, Steven J. M.; Nienhuis, Gerard

2010-01-01

The transverse spatial structure of a paraxial beam of light is fully characterized by a set of parameters that vary only slowly under free propagation. They specify bosonic ladder operators that connect modes of different orders, in analogy to the ladder operators connecting harmonic-oscillator wave functions. The parameter spaces underlying sets of higher-order modes are isomorphic to the parameter space of the ladder operators. We study the geometry of this space and the geometric phase that arises from it. This phase constitutes the ultimate generalization of the Gouy phase in paraxial wave optics. It reduces to the ordinary Gouy phase and the geometric phase of nonastigmatic optical modes with orbital angular momentum in limiting cases. We briefly discuss the well-known analogy between geometric phases and the Aharonov-Bohm effect, which provides some complementary insights into the geometric nature and origin of the generalized Gouy phase shift. Our method also applies to the quantum-mechanical description of wave packets. It allows for obtaining complete sets of normalized solutions of the Schroedinger equation. Cyclic transformations of such wave packets give rise to a phase shift, which has a geometric interpretation in terms of the other degrees of freedom involved.

Geometric Mechanics Reveals Optimal Complex Terrestrial Undulation Patterns

Science.gov (United States)

Gong, Chaohui; Astley, Henry; Schiebel, Perrin; Dai, Jin; Travers, Matthew; Goldman, Daniel; Choset, Howie; CMU Team; GT Team

Geometric mechanics offers useful tools for intuitively analyzing biological and robotic locomotion. However, utility of these tools were previously restricted to systems that have only two internal degrees of freedom and in uniform media. We show kinematics of complex locomotors that make intermittent contacts with substrates can be approximated as a linear combination of two shape bases, and can be represented using two variables. Therefore, the tools of geometric mechanics can be used to analyze motions of locomotors with many degrees of freedom. To demonstrate the proposed technique, we present studies on two different types of snake gaits which utilize combinations of waves in the horizontal and vertical planes: sidewinding (in the sidewinder rattlesnake C. cerastes) and lateral undulation (in the desert specialist snake C. occipitalis). C. cerastes moves by generating posteriorly traveling body waves in the horizontal and vertical directions, with a relative phase offset equal to +/-π/2 while C. occipitalismaintains a π/2 offset of a frequency doubled vertical wave. Geometric analysis reveals these coordination patterns enable optimal movement in the two different styles of undulatory terrestrial locomotion. More broadly, these examples demonstrate the utility of geometric mechanics in analyzing realistic biological and robotic locomotion.

Analisi Pengaruh Store Name, Brand Name, Dan Price Discounts Terhadap Purchase Intentions Konsumen Infinite Tunjungan Plaza

OpenAIRE

Gunawan, Andy

2013-01-01

Andy Gunawan:SkripsiAnalisis pengaruh store name, brand name dan price discounts terhadap purchase intention konsumen infnite tunjungan plaza Di era globalisasi ini, persaingan dagang antara Perusahaan – Perusahaan baik lokal maupun global menjadi semakin ketat, oleh karena itu Perusahaan selalu berusaha untuk meningkatkan ketertarikan minat beli konsumen. Beberapa variabel yang menjadi fokus Perusahaan adalah store name, brand name, dan price discount. Tujuan penelitian ini adalah untuk meng...

Current Trends in Name Giving among Bulgarians: A Study of the Names of Newborns in the Sofia Region

Directory of Open Access Journals (Sweden)

Maya Vlahova-Angelova

2017-11-01

Full Text Available The article showcases a large-scale study of the modern Bulgarian anthroponymic system conducted by the Applied Onomastics section of the Bulgarian Academy of Sciences Institute for the Bulgarian Language (IBL with the aim of revealing the current trends in the choice of personal names by the Bulgarians at the beginning of the 21st century. The study focuses on personal names of Bulgarians born in 2010 in the Sofia region, as extracted from the Unified System of Civil Registration and Administrative Services of the Population of the Republic of Bulgaria. The total number of births this year was 1,005, of which 51.5% were boys, 48.5% were girls. Statistical and linguistic analysis of names allowed to measure the popularity of both individual personal names and different name types. It shows the quantitative ratio between most commonly chosen names and those of a singular use in relation to the total number of anthroponyms in the corpus, and proves that the male names are more sustainable in terms of usage than female. The derivational and etymological analysis of personal names helped to identify the productive word-formation types of names and the so-called “unisex names,” to distinguish between the native Bulgarian and the borrowed foreign names, as well as to classify graphic and phonetic variants of the same anthroponym. A number of quantitative comparisons were made between certain categories of names, for example, between compound (two-stem personal names (such as Miroslav and simple names (such as Biser, showing the ratio of the two-component personal names (such as Anna-Maria to the rest of the anthroponyms. It was found that the Bulgarian anthroponymic system in the beginning of the 21st century is more open to the non-adapted foreign names (like Mishel, Nancy, shows wider usage of diminutive “unisex names” (Moni, Stephy, Toni, as well as the growing popularity of shortened forms used as official names (Alex, Boni, Pepi, and the

Name fashion dynamics and social class

NARCIS (Netherlands)

Bloothooft, G.; Schraagen, M.P.

2011-01-01

Modern parents in The Netherlands choose the first names they like for their children. In this decision most follow fashion and as a typical property of fashion, many popular names now have a life cycle of only one generation. Some names show a symmetry between rise and fall of the name, but most

An update on ABO incompatible hematopoietic progenitor cell transplantation.

Science.gov (United States)

Staley, Elizabeth M; Schwartz, Joseph; Pham, Huy P

2016-06-01

Hematopoietic progenitor cell (HPC) transplantation has long been established as the optimal treatment for many hematologic malignancies. In the setting of allogenic HLA matched HPC transplantation, greater than 50% of unrelated donors and 30% of related donors demonstrate some degree of ABO incompatibility (ABOi), which is classified in one of three ways: major, minor, or bidirectional. Major ABOi refers to the presence of recipient isoagglutinins against the donor's A and/or B antigen. Minor ABOi occurs when the HPC product contains the isoagglutinins targeting the recipient's A and/or B antigen. Bidirectional refers to the presence of both major and minor ABOi. Major adverse events associated with ABOi HPC transplantation includes acute and delayed hemolysis, pure red cell aplasia, and delayed engraftment. ABOi HPC transplantation poses a unique challenge to the clinical transplantation unit, the HPC processing lab, and the transfusion medicine service. Therefore, it is essential that these services actively communicate with one another to ensure patient safety. This review will attempt to globally address the challenges related to ABOi HPC transplantation, with an increased focus on aspects related to the laboratory and transfusion medicine services. Copyright © 2016 Elsevier Ltd. All rights reserved.

Name signs in Danish Sign Language

DEFF Research Database (Denmark)

Bakken Jepsen, Julie

2018-01-01

in spoken languages, where a person working as a blacksmith by his friends might be referred to as ‘The Blacksmith’ (‘Here comes the Blacksmith!’) instead of using the person’s first name. Name signs are found not only in Danish Sign Language (DSL) but in most, if not all, sign languages studied to date....... This article provides examples of the creativity of the users of Danish Sign Language, including some of the processes in the use of metaphors, visual motivation and influence from Danish when name signs are created.......A name sign is a personal sign assigned to deaf, hearing impaired and hearing persons who enter the deaf community. The mouth action accompanying the sign reproduces all or part of the formal first name that the person has received by baptism or naming. Name signs can be compared to nicknames...

Greek-Cypriot Teachers' Perceptions of Religious Education and Its Contribution to Peace: Perspectives of (In)compatibility in a Divided Society

Science.gov (United States)

Loukaidis, Loizos; Zembylas, Michalinos

2017-01-01

This paper explores the ways in which a group of primary school teachers in Cyprus interprets religious education and its contribution to peace. In particular, this phenomenological exploratory study: first, examines how teachers perceive religious education and whether this conceptualization is considered to be (in)compatible with peace in the…

On chromatic and geometrical calibration

DEFF Research Database (Denmark)

Folm-Hansen, Jørgen

1999-01-01

The main subject of the present thesis is different methods for the geometrical and chromatic calibration of cameras in various environments. For the monochromatic issues of the calibration we present the acquisition of monochrome images, the classic monochrome aberrations and the various sources...... the correct interpolation method is described. For the chromatic issues of calibration we present the acquisition of colour and multi-spectral images, the chromatic aberrations and the various lens/camera based non-uniformities of the illumination of the image plane. It is described how the monochromatic...... to design calibration targets for both geometrical and chromatic calibration are described. We present some possible systematical errors on the detection of the objects in the calibration targets, if viewed in a non orthogonal angle, if the intensities are uneven or if the image blurring is uneven. Finally...

Calculation of the geometrical intensity on an image surface

International Nuclear Information System (INIS)

Seppala, L.G.

1975-01-01

Laser fusion experiments involve the focusing of high power laser beams onto fuel pellets. The geometrical intensity is of interest in the cases where the laser is focused to the center of the pellet. Analytic expressions and ray trace methods for evaluating the geometrical intensity are presented

27 CFR 4.33 - Brand names.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Brand names. 4.33 Section... THE TREASURY LIQUORS LABELING AND ADVERTISING OF WINE Labeling Requirements for Wine § 4.33 Brand names. (a) General. The product shall bear a brand name, except that if not sold under a brand name...

A geometric renormalization group in discrete quantum space-time

International Nuclear Information System (INIS)

Requardt, Manfred

2003-01-01

We model quantum space-time on the Planck scale as dynamical networks of elementary relations or time dependent random graphs, the time dependence being an effect of the underlying dynamical network laws. We formulate a kind of geometric renormalization group on these (random) networks leading to a hierarchy of increasingly coarse-grained networks of overlapping lumps. We provide arguments that this process may generate a fixed limit phase, representing our continuous space-time on a mesoscopic or macroscopic scale, provided that the underlying discrete geometry is critical in a specific sense (geometric long range order). Our point of view is corroborated by a series of analytic and numerical results, which allow us to keep track of the geometric changes, taking place on the various scales of the resolution of space-time. Of particular conceptual importance are the notions of dimension of such random systems on the various scales and the notion of geometric criticality

Inverse Kinematics for Industrial Robots using Conformal Geometric Algebra

Directory of Open Access Journals (Sweden)

Adam L. Kleppe

2016-01-01

Full Text Available This paper shows how the recently developed formulation of conformal geometric algebra can be used for analytic inverse kinematics of two six-link industrial manipulators with revolute joints. The paper demonstrates that the solution of the inverse kinematics in this framework relies on the intersection of geometric objects like lines, circles, planes and spheres, which provides the developer with valuable geometric intuition about the problem. It is believed that this will be very useful for new robot geometries and other mechanisms like cranes and topside drilling equipment. The paper extends previous results on inverse kinematics using conformal geometric algebra by providing consistent solutions for the joint angles for the different configurations depending on shoulder left or right, elbow up or down, and wrist flipped or not. Moreover, it is shown how to relate the solution to the Denavit-Hartenberg parameters of the robot. The solutions have been successfully implemented and tested extensively over the whole workspace of the manipulators.

Monomial geometric programming with an arbitrary fuzzy relational inequality

Directory of Open Access Journals (Sweden)

E. Shivanian

2015-11-01

Full Text Available In this paper, an optimization model with geometric objective function is presented. Geometric programming is widely used; many objective functions in optimization problems can be analyzed by geometric programming. We often encounter these in resource allocation and structure optimization and technology management, etc. On the other hand, fuzzy relation equalities and inequalities are also used in many areas. We here present a geometric programming model with a monomial objective function subject to the fuzzy relation inequality constraints with an arbitrary function. The feasible solution set is determined and compared with some common results in the literature. A necessary and sufficient condition and three other necessary conditions are presented to conceptualize the feasibility of the problem. In general a lower bound is always attainable for the optimal objective value by removing the components having no effect on the solution process. By separating problem to non-decreasing and non-increasing function to prove the optimal solution, we simplify operations to accelerate the resolution of the problem.

Direct quantum process tomography via measuring sequential weak values of incompatible observables.

Science.gov (United States)

Kim, Yosep; Kim, Yong-Su; Lee, Sang-Yun; Han, Sang-Wook; Moon, Sung; Kim, Yoon-Ho; Cho, Young-Wook

2018-01-15

The weak value concept has enabled fundamental studies of quantum measurement and, recently, found potential applications in quantum and classical metrology. However, most weak value experiments reported to date do not require quantum mechanical descriptions, as they only exploit the classical wave nature of the physical systems. In this work, we demonstrate measurement of the sequential weak value of two incompatible observables by making use of two-photon quantum interference so that the results can only be explained quantum physically. We then demonstrate that the sequential weak value measurement can be used to perform direct quantum process tomography of a qubit channel. Our work not only demonstrates the quantum nature of weak values but also presents potential new applications of weak values in analyzing quantum channels and operations.

The Effects of Computer-assisted and Distance Learning of Geometric Modeling

Directory of Open Access Journals (Sweden)

Omer Faruk Sozcu

2013-01-01

Full Text Available The effects of computer-assisted and distance learning of geometric modeling and computer aided geometric design are studied. It was shown that computer algebra systems and dynamic geometric environments can be considered as excellent tools for teaching mathematical concepts of mentioned areas, and distance education technologies would be indispensable for consolidation of successfully passed topics

Estimation of geometrically undistorted B0 inhomogeneity maps

International Nuclear Information System (INIS)

Matakos, A; Balter, J; Cao, Y

2014-01-01

Geometric accuracy of MRI is one of the main concerns for its use as a sole image modality in precision radiation therapy (RT) planning. In a state-of-the-art scanner, system level geometric distortions are within acceptable levels for precision RT. However, subject-induced B 0 inhomogeneity may vary substantially, especially in air-tissue interfaces. Recent studies have shown distortion levels of more than 2 mm near the sinus and ear canal are possible due to subject-induced field inhomogeneity. These distortions can be corrected with the use of accurate B 0 inhomogeneity field maps. Most existing methods estimate these field maps from dual gradient-echo (GRE) images acquired at two different echo-times under the assumption that the GRE images are practically undistorted. However distortion that may exist in the GRE images can result in estimated field maps that are distorted in both geometry and intensity, leading to inaccurate correction of clinical images. This work proposes a method for estimating undistorted field maps from GRE acquisitions using an iterative joint estimation technique. The proposed method yields geometrically corrected GRE images and undistorted field maps that can also be used for the correction of images acquired by other sequences. The proposed method is validated through simulation, phantom experiments and applied to patient data. Our simulation results show that our method reduces the root-mean-squared error of the estimated field map from the ground truth by ten-fold compared to the distorted field map. Both the geometric distortion and the intensity corruption (artifact) in the images caused by the B 0 field inhomogeneity are corrected almost completely. Our phantom experiment showed improvement in the geometric correction of approximately 1 mm at an air-water interface using the undistorted field map compared to using a distorted field map. The proposed method for undistorted field map estimation can lead to improved geometric

Estimation of geometrically undistorted B0 inhomogeneity maps

Science.gov (United States)

Matakos, A.; Balter, J.; Cao, Y.

2014-09-01

Geometric accuracy of MRI is one of the main concerns for its use as a sole image modality in precision radiation therapy (RT) planning. In a state-of-the-art scanner, system level geometric distortions are within acceptable levels for precision RT. However, subject-induced B0 inhomogeneity may vary substantially, especially in air-tissue interfaces. Recent studies have shown distortion levels of more than 2 mm near the sinus and ear canal are possible due to subject-induced field inhomogeneity. These distortions can be corrected with the use of accurate B0 inhomogeneity field maps. Most existing methods estimate these field maps from dual gradient-echo (GRE) images acquired at two different echo-times under the assumption that the GRE images are practically undistorted. However distortion that may exist in the GRE images can result in estimated field maps that are distorted in both geometry and intensity, leading to inaccurate correction of clinical images. This work proposes a method for estimating undistorted field maps from GRE acquisitions using an iterative joint estimation technique. The proposed method yields geometrically corrected GRE images and undistorted field maps that can also be used for the correction of images acquired by other sequences. The proposed method is validated through simulation, phantom experiments and applied to patient data. Our simulation results show that our method reduces the root-mean-squared error of the estimated field map from the ground truth by ten-fold compared to the distorted field map. Both the geometric distortion and the intensity corruption (artifact) in the images caused by the B0 field inhomogeneity are corrected almost completely. Our phantom experiment showed improvement in the geometric correction of approximately 1 mm at an air-water interface using the undistorted field map compared to using a distorted field map. The proposed method for undistorted field map estimation can lead to improved geometric

Improved Vocabulary Production after Naming Therapy in Aphasia: Can Gains in Picture Naming Generalise to Connected Speech?

Science.gov (United States)

Conroy, Paul; Sage, Karen; Ralph, Matt Lambon

2009-01-01

Background: Naming accuracy for nouns and verbs in aphasia can vary across different elicitation contexts, for example, simple picture naming, composite picture description, narratives, and conversation. For some people with aphasia, naming may be more accurate to simple pictures as opposed to naming in spontaneous, connected speech; for others,…

27 CFR 41.251 - Change in name.

Science.gov (United States)

2010-04-01

... corporate name. When there is a change in the corporate name of an importer of processed tobacco, the... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in name. 41.251... name. (a) Change in individual name. When there is a change in the name of an individual operating...

Assigned value improves memory of proper names.

Science.gov (United States)

Festini, Sara B; Hartley, Alan A; Tauber, Sarah K; Rhodes, Matthew G

2013-01-01

Names are more difficult to remember than other personal information such as occupations. The current research examined the influence of assigned point value on memory and metamemory judgements for names and occupations to determine whether incentive can improve recall of proper names. In Experiment 1 participants studied face-name and face-occupation pairs assigned 1 or 10 points, made judgements of learning, and were given a cued recall test. High-value names were recalled more often than low-value names. However, recall of occupations was not influenced by value. In Experiment 2 meaningless nonwords were used for both names and occupations. The name difficulty disappeared, and value influenced recall of both names and occupations. Thus value similarly influenced names and occupations when meaningfulness was held constant. In Experiment 3 participants were required to use overt rote rehearsal for all items. Value did not boost recall of high-value names, suggesting that differential processing could not be implemented to improve memory. Thus incentives may improve memory for proper names by motivating people to engage in selective rehearsal and effortful elaborative processing.

Geometric singular perturbation analysis of systems with friction

DEFF Research Database (Denmark)

Bossolini, Elena

This thesis is concerned with the application of geometric singular perturbation theory to mechanical systems with friction. The mathematical background on geometric singular perturbation theory, on the blow-up method, on non-smooth dynamical systems and on regularization is presented. Thereafter......, two mechanical problems with two different formulations of the friction force are introduced and analysed. The first mechanical problem is a one-dimensional spring-block model describing earthquake faulting. The dynamics of earthquakes is naturally a multiple timescale problem: the timescale...... scales. The action of friction is generally explained as the loss and restoration of linkages between the surface asperities at the molecular scale. However, the consequences of friction are noticeable at much larger scales, like hundreds of kilometers. By using geometric singular perturbation theory...

Integration of irradiation with cytoplasmic incompatibility to facilitate a lymphatic filariasis vector elimination approach

Directory of Open Access Journals (Sweden)

Dobson Stephen L

2009-08-01

Full Text Available Abstract Background Mass drug administration (MDA is the emphasis of an ongoing global lymphatic filariasis (LF elimination program by the World Health Organization, in which the entire 'at risk' human population is treated annually with anti-filarial drugs. However, there is evidence that the MDA strategy may not be equally appropriate in all areas of LF transmission, leading to calls for the augmentation of MDA with anti-vector interventions. One potential augmentative intervention is the elimination of vectors via repeated inundative releases of male mosquitoes made cytoplasmically incompatible via an infection with Wolbachia bacteria. However, with a reduction in the vector population size, there is the risk that an accidental female release would permit the establishment of the incompatible Wolbachia infection type, resulting in population replacement instead of population elimination. To avoid the release of fertile females, we propose the exposure of release individuals to low doses of radiation to sterilize any accidentally released females, reducing the risk of population replacement. Results Aedes polynesiensis pupae of differing ages were irradiated to determine a radiation dose that results in sterility but that does not affect the survival and competitiveness of males. Laboratory assays demonstrate that males irradiated at a female sterilizing dosage of 40 Gy are equally competitive with un-irradiated males. No effect of irradiation on the ability of Wolbachia to affect egg hatch was observed. Conclusion An irradiation dose of 40 Gy is sufficient to cause female sterility, but has no observed negative effect on male fitness. The results support further development of this approach as a preventative measure against accidental population replacement.

Density functional calculations on the geometric structure and properties of the 3d transition metal atom doped endohedral fullerene M@C20F20 (M = Sc–Ni)

International Nuclear Information System (INIS)

Chun-Mei, Tang; Wei-Hua, Zhu; Kai-Ming, Deng

2010-01-01

This paper uses the generalised gradient approximation based on density functional theory to analyse the geometric structure and properties of the 3d transition metal atom doped endohedral fullerene M@C 20 F 20 (M = Sc–Ni). The geometric optimization shows that the cage centre is the most stable position for M, forming the structure named as M@C 20 F 20 -4. The inclusion energy, zero-point energy, and energy gap calculations tell us that N@C 20 F 20 -4 should be thermodynamically and kinetically stablest. M@C 20 F 20 -4 (M = Sc–Co) possesses high magnetic moments varied from 1 to 6 μ B , while Ni@C 20 F 20 -4 is nonmagnetic. The Ni–C bond in Ni@C 20 F 20 -4 contains both the covalent and ionic characters

Aspects of random geometric graphs : Pursuit-evasion and treewidth

NARCIS (Netherlands)

Li, A.

2015-01-01

In this thesis, we studied two aspects of random geometric graphs: pursuit-evasion and treewidth. We first studied one pursuit-evasion game: Cops and Robbers. This game, which dates back to 1970s, are studied extensively in recent years. We investigate this game on random geometric graphs, and get

Discrete geometric structures for architecture

KAUST Repository

Pottmann, Helmut

2010-01-01

. The talk will provide an overview of recent progress in this field, with a particular focus on discrete geometric structures. Most of these result from practical requirements on segmenting a freeform shape into planar panels and on the physical realization

Quantum renormalization group approach to geometric phases in spin chains

International Nuclear Information System (INIS)

Jafari, R.

2013-01-01

A relation between geometric phases and criticality of spin chains are studied using the quantum renormalization-group approach. I have shown how the geometric phase evolve as the size of the system becomes large, i.e., the finite size scaling is obtained. The renormalization scheme demonstrates how the first derivative of the geometric phase with respect to the field strength diverges at the critical point and maximum value of the first derivative, and its position, scales with the exponent of the system size

Geometric measures of multipartite entanglement in finite-size spin chains

Energy Technology Data Exchange (ETDEWEB)

Blasone, M; Dell' Anno, F; De Siena, S; Giampaolo, S M; Illuminati, F, E-mail: illuminati@sa.infn.i [Dipartimento di Matematica e Informatica, Universita degli Studi di Salerno, Via Ponte don Melillo, I-84084 Fisciano (Italy)

2010-09-01

We investigate the behaviour of multipartite entanglement in finite-size quantum spin systems, resorting to a hierarchy of geometric measures of multipartite entanglement recently introduced in the literature. In particular, we investigate the ground-state entanglement in the XY model defined on finite chains of N sites with periodic boundary conditions. We analyse the behaviour of the geometric measures of (N- 1)-partite and (N/2)-partite entanglement and compare them with the Wei-Goldbart geometric measure of global entanglement.

Geometric measures of multipartite entanglement in finite-size spin chains

International Nuclear Information System (INIS)

Blasone, M; Dell'Anno, F; De Siena, S; Giampaolo, S M; Illuminati, F

2010-01-01

We investigate the behaviour of multipartite entanglement in finite-size quantum spin systems, resorting to a hierarchy of geometric measures of multipartite entanglement recently introduced in the literature. In particular, we investigate the ground-state entanglement in the XY model defined on finite chains of N sites with periodic boundary conditions. We analyse the behaviour of the geometric measures of (N- 1)-partite and (N/2)-partite entanglement and compare them with the Wei-Goldbart geometric measure of global entanglement.

Aspects of the geometrical approach to supermanifolds

International Nuclear Information System (INIS)

Rogers, A.

1984-01-01

Various topics in the theory and application of the geometrical approach to supermanifolds are discussed. The construction of the superspace used in supergravity over an arbitrary spacetime manifold is described. Super Lie groups and their relation to graded Lie algebras (and more general structures referred to as 'graded Lie modules') are discussed, with examples. Certain supermanifolds, allowed in the geometric approach (using the fine topology), but having no analogue in the algebraic approach, are discussed. Finally lattice supersymmetry, and its relation to the differential geometry of supermanifolds, is discussed. (orig.)

What Do People Find Incompatible With Causal Determinism?

Science.gov (United States)

Bear, Adam; Knobe, Joshua

2016-11-01

Four studies explored people's judgments about whether particular types of behavior are compatible with determinism. Participants read a passage describing a deterministic universe, in which everything that happens is fully caused by whatever happened before it. They then assessed the degree to which different behaviors were possible in such a universe. Other participants evaluated the extent to which each of these behaviors had various features (e.g., requiring reasoning). We assessed the extent to which these features predicted judgments about whether the behaviors were possible in a deterministic universe. Experiments 1 and 2 found that people's judgments about whether a behavior was compatible with determinism were not predicted by their judgments about whether that behavior relies on physical processes in the brain and body, is uniquely human, is unpredictable, or involves reasoning. Experiment 3, however, found that a distinction between what we call "active" and "passive" behaviors can explain people's judgments. Experiment 4 extended these findings, showing that we can measure this distinction in several ways and that it is robustly predicted by two different cues. Taken together, these results suggest that people carve up mentally guided behavior into two distinct types-understanding one type to be compatible with determinism, but another type to be fundamentally incompatible with determinism. Copyright © 2015 Cognitive Science Society, Inc.

GEOMETRIZATION OF NONHOLONOMIC MECHANICAL SYSTEMS AND THEIR SOLVABILITY

Institute of Scientific and Technical Information of China (English)

慕小武; 郭仲衡

1990-01-01

A new geometrization approach to nonholonomic mechanical systems is proposed and a series of solvability conditions under the proposed geometric frame are given. The proposed frame differs essentially from Hermann’s. The limitations of Hermann’s frame are also discussed. It is shown that a system under Hermann’s frame is solvable only if its constraints are given by natural conservation laws of the corresponding constraint-free system.

Geometric measure theory

CERN Document Server

Waerden, B

1996-01-01

From the reviews: "... Federer's timely and beautiful book indeed fills the need for a comprehensive treatise on geometric measure theory, and his detailed exposition leads from the foundations of the theory to the most recent discoveries. ... The author writes with a distinctive style which is both natural and powerfully economical in treating a complicated subject. This book is a major treatise in mathematics and is essential in the working library of the modern analyst." Bulletin of the London Mathematical Society.

Geometric homology revisited

OpenAIRE

Ruffino, Fabio Ferrari

2013-01-01

Given a cohomology theory, there is a well-known abstract way to define the dual homology theory using the theory of spectra. In [4] the author provides a more geometric construction of the homology theory, using a generalization of the bordism groups. Such a generalization involves in its definition the vector bundle modification, which is a particular case of the Gysin map. In this paper we provide a more natural variant of that construction, which replaces the vector bundle modification wi...

Developing geometrical reasoning

OpenAIRE

Brown, Margaret; Jones, Keith; Taylor, Ron; Hirst, Ann

2004-01-01

This paper summarises a report (Brown, Jones & Taylor, 2003) to the UK Qualifications and Curriculum Authority of the work of one geometry group. The group was charged with developing and reporting on teaching ideas that focus on the development of geometrical reasoning at the secondary school level. The group was encouraged to explore what is possible both within and beyond the current requirements of the UK National Curriculum and the Key Stage 3 strategy, and to consider the whole atta...

Plasma geometric optics analysis and computation

International Nuclear Information System (INIS)

Smith, T.M.

1983-01-01

Important practical applications in the generation, manipulation, and diagnosis of laboratory thermonuclear plasmas have created a need for elaborate computational capabilities in the study of high frequency wave propagation in plasmas. A reduced description of such waves suitable for digital computation is provided by the theory of plasma geometric optics. The existing theory is beset by a variety of special cases in which the straightforward analytical approach fails, and has been formulated with little attention to problems of numerical implementation of that analysis. The standard field equations are derived for the first time from kinetic theory. A discussion of certain terms previously, and erroneously, omitted from the expansion of the plasma constitutive relation is given. A powerful but little known computational prescription for determining the geometric optics field in the neighborhood of caustic singularities is rigorously developed, and a boundary layer analysis for the asymptotic matching of the plasma geometric optics field across caustic singularities is performed for the first time with considerable generality. A proper treatment of birefringence is detailed, wherein a breakdown of the fundamental perturbation theory is identified and circumvented. A general ray tracing computer code suitable for applications to radiation heating and diagnostic problems is presented and described

Geometric Rationalization for Freeform Architecture

KAUST Repository

Jiang, Caigui

2016-06-20

The emergence of freeform architecture provides interesting geometric challenges with regards to the design and manufacturing of large-scale structures. To design these architectural structures, we have to consider two types of constraints. First, aesthetic constraints are important because the buildings have to be visually impressive. Sec- ond, functional constraints are important for the performance of a building and its e cient construction. This thesis contributes to the area of architectural geometry. Specifically, we are interested in the geometric rationalization of freeform architec- ture with the goal of combining aesthetic and functional constraints and construction requirements. Aesthetic requirements typically come from designers and architects. To obtain visually pleasing structures, they favor smoothness of the building shape, but also smoothness of the visible patterns on the surface. Functional requirements typically come from the engineers involved in the construction process. For exam- ple, covering freeform structures using planar panels is much cheaper than using non-planar ones. Further, constructed buildings have to be stable and should not collapse. In this thesis, we explore the geometric rationalization of freeform archi- tecture using four specific example problems inspired by real life applications. We achieve our results by developing optimization algorithms and a theoretical study of the underlying geometrical structure of the problems. The four example problems are the following: (1) The design of shading and lighting systems which are torsion-free structures with planar beams based on quad meshes. They satisfy the functionality requirements of preventing light from going inside a building as shad- ing systems or reflecting light into a building as lighting systems. (2) The Design of freeform honeycomb structures that are constructed based on hex-dominant meshes with a planar beam mounted along each edge. The beams intersect without

Geometric Approaches to Quadratic Equations from Other Times and Places.

Science.gov (United States)

Allaire, Patricia R.; Bradley, Robert E.

2001-01-01

Focuses on geometric solutions of quadratic problems. Presents a collection of geometric techniques from ancient Babylonia, classical Greece, medieval Arabia, and early modern Europe to enhance the quadratic equation portion of an algebra course. (KHR)

A radiographic anthology of vertebral names

International Nuclear Information System (INIS)

Yochum, T.R.; Hartley, B.; Thomas, D.P.; Guebert, G.M.

1987-01-01

A total of 88 such named vertebrae have been extracted from the literature. With so many names from scattered sources, the authors collated them in a single presentation. A description is given and the anatomical and pathogenic reasons for the appearances are considered. A list of conditions associated with each named vertebra accompanies the descriptive paragraph. The named vertebrae are presented in alphabetical order

A study on self-incompatibility and its physiological causes in mango (Mangifera indica L.) Cv. Dashehari

International Nuclear Information System (INIS)

Pandey, R.M.; Singh, R.N.; Rathore, D.S.

1974-01-01

In studies on the physiological causes of self-incompatibility in mango (Mangifera indica L.) cv. Dashehari, both self and cross-pollinated fruitlets were analysed for auxin-like substances at different states of their growth. It was found that cross-pollinated fruitlets act as a stronger physiological sink as compared to self-pollinated ones. Activity measurement and autoradiography of leaves and fruitlets at different stages of their growth indicated that the mobility of 32 P was more towards cross-pollinated fruitlets than that of self-pollinated ones. (author)

Medieval Karelian Calendar Names: A Cognitive Perspective

Directory of Open Access Journals (Sweden)

Irina A. Kyurshunova

2013-11-01

Full Text Available The article focuses on calendar personal names recorded in the 15–17th centuries Russian and Swedish manuscripts written in Karelia. Revealing the cognitive potential of this historical stratum of names, the author analyzes the frequency of full (official and modified forms of calendar names, the regional peculiarities of their linguistic adaptation, their ethnolinguisitic and social status, as well as the functioning of calendar names in the regional onomastic system. The analysis shows that the calendar onomasticon holds the leading positions, which reflects important axiological and mental shifts in the people’s culture. The list of most frequent Christian names of the region generally coincides with the onomastic data related to other Russian territories of the same period. The conservation of the name nomenclature is due to family traditions, namely, to familial practices of naming. However, the adaptation and distribution of names display some regional features, particularly in the frequency of different groups of anthroponyms. The peripheral situation of the region and the presence of Balto-Fennic population which adapted the Russian calendar athroponymicon determined the “conservatism” of the calendar names nomenclature: for naming, they selected the names which were better adapted and more extensively used among Russians. The formation of modified names depended mostly on the morphemic structure of the Russian language, regional features being relatively insignificant. The frequency of modified forms of names correlates with the genre of the manuscript and the scribe’s arbitrariness.

Geometric methods in PDE’s

CERN Document Server

Manfredini, Maria; Morbidelli, Daniele; Polidoro, Sergio; Uguzzoni, Francesco

2015-01-01

The analysis of PDEs is a prominent discipline in mathematics research, both in terms of its theoretical aspects and its relevance in applications. In recent years, the geometric properties of linear and nonlinear second order PDEs of elliptic and parabolic type have been extensively studied by many outstanding researchers. This book collects contributions from a selected group of leading experts who took part in the INdAM meeting "Geometric methods in PDEs", on the occasion of the 70th birthday of Ermanno Lanconelli. They describe a number of new achievements and/or the state of the art in their discipline of research, providing readers an overview of recent progress and future research trends in PDEs. In particular, the volume collects significant results for sub-elliptic equations, potential theory and diffusion equations, with an emphasis on comparing different methodologies and on their implications for theory and applications. .

Islamic geometric patterns their historical development and traditional methods of construction

CERN Document Server

Bonner, Jay

2017-01-01

The main focus of this unique book is an in-depth examination of the polygonal technique; the primary method used by master artists of the past in creating Islamic geometric patterns. The author details the design methodology responsible for this all-but-lost art form and presents evidence for its use from the historical record, both of which are vital contributions to the understanding of this ornamental tradition. Additionally, the author examines the historical development of Islamic geometric patterns, the significance of geometric design within the broader context of Islamic ornament as a whole, the formative role that geometry plays throughout the Islamic ornamental arts (including calligraphy, the floral idiom, dome decoration, geometric patterns, and more), and the underexamined question of pattern classification. Featuring over 600 beautiful color images, Islamic Geometric Patterns: Their Historical Development and Traditional Methods of Construction is a valuable addition to the literature of Islam...

Geometric calculus: a new computational tool for Riemannian geometry

International Nuclear Information System (INIS)

Moussiaux, A.; Tombal, P.

1988-01-01

We compare geometric calculus applied to Riemannian geometry with Cartan's exterior calculus method. The correspondence between the two methods is clearly established. The results obtained by a package written in an algebraic language and doing general manipulations on multivectors are compared. We see that the geometric calculus is as powerful as exterior calculus

It takes two to tango: self incompatibility in the bromeliad Tillandsia streptophylla (Bromeliaceae in Mexico

Directory of Open Access Journals (Sweden)

Ivón M Ramírez Morillo

2009-09-01

Full Text Available Floral phenology and breeding system of Tillandsia streptophylla (Bromeliaceae were studied in a low inundated forest in Yucatan, Mexico. During the flowering season, from March to August, terminal scapose 1-branched, paniculate inflorescences are produced with one flower per branch opening per day, over a period of 11-29 days. Flowers are tubular, light violet, with the stigma placed below the anthers, both protruding above the corolla. Flowers are protandrous, with anthers releasing pollen from 0500 hours and stigma becoming receptive around 0900 hours. Controlled experimental crosses suggest that Tillandsia streptophylla is self incompatible and therefore, pollinator-dependent. Rev. Biol. Trop. 57 (3: 761-770. Epub 2009 September 30.Estudiamos la fenología floral y el sistema de cruzamiento de la bromelia Tillandsia streptophylla (Bromeliaceae en una selva baja inundable en Yucatán, México. Durante la estación de floración (marzo a agosto, las plantas producen una inflorescencia terminal, escaposa, paniculada, 1-dividida, con una flor abriendo por rama por día para un período de floración de 11-29 días por inflorescencia. Las flores son tubulares, de corola violeta claro, con el estigma y anteras exertos, pero las anteras más largas que el estigma en antesis. Las flores son protandras, con las anteras liberando el polen desde las 0500 horas y la receptividad del estigma comenzando a las 0900 horas. Los cruces experimentales controlados sugieren que Tillansdia streptophylla es auto incompatible y por ende, dependiente de los polinizadores.

Naming polyhedra by general face-spirals - theory and applications to fullerenes and other polyhedral molecules

DEFF Research Database (Denmark)

Wirz, Lukas; Schwerdtfeger, Peter; Avery, James Emil

2018-01-01

We present a general face-spiral algorithm for cubic polyhedral graphs (including fullerenes and fulleroids), and extend it to the full class of all polyhedral graphs by way of the leapfrog transform. This yields compact canonical representations of polyhedra with a simple and intuitive geometrical...... polyhedral molecules, and an especially compact form for the special class of fullerenes. A unique numbering of vertices is obtained as a byproduct of the spiral algorithm. This is required to denote modifications of the parent cage in IUPAC naming schemes. Similarly, the symmetry group of the molecule can...... be found together with the canonical general spiral at negligible cost. The algorithm is fully compatible with the classical spiral algorithm developed by Manolopoulos for fullerenes, i. e., classical spirals are accepted as input, and spiralable graphs lead to identical output. We prove that the algorithm...

The differential-geometric aspects of integrable dynamical systems

International Nuclear Information System (INIS)

Prykarpatsky, Y.A.; Samoilenko, A.M.; Prykarpatsky, A.K.; Bogolubov, N.N. Jr.; Blackmore, D.L.

2007-05-01

The canonical reduction method on canonically symplectic manifolds is analyzed in detail, and the relationships with the geometric properties of associated principal fiber bundles endowed with connection structures are described. Some results devoted to studying geometrical properties of nonabelian Yang-Mills type gauge field equations are presented. A symplectic theory approach is developed for partially solving the problem of algebraic-analytical construction of integral submanifold embeddings for integrable (via the abelian and nonabelian Liouville-Arnold theorems) Hamiltonian systems on canonically symplectic phase spaces. The fundamental role of the so-called Picard-Fuchs type equations is revealed, and their differential-geometric and algebraic properties are studied in detail. Some interesting examples of integrable Hamiltonian systems are are studied in detail in order to demonstrate the ease of implementation and effectiveness of the procedure for investigating the integral submanifold embedding mapping. (author)

Geometric model from microscopic theory for nuclear absorption

International Nuclear Information System (INIS)

John, S.; Townsend, L.W.; Wilson, J.W.; Tripathi, R.K.

1993-07-01

A parameter-free geometric model for nuclear absorption is derived herein from microscopic theory. The expression for the absorption cross section in the eikonal approximation, taken in integral form, is separated into a geometric contribution that is described by an energy-dependent effective radius and two surface terms that cancel in an asymptotic series expansion. For collisions of light nuclei, an expression for the effective radius is derived from harmonic oscillator nuclear density functions. A direct extension to heavy nuclei with Woods-Saxon densities is made by identifying the equivalent half-density radius for the harmonic oscillator functions. Coulomb corrections are incorporated, and a simplified geometric form of the Bradt-Peters type is obtained. Results spanning the energy range from 1 MeV/nucleon to 1 GeV/nucleon are presented. Good agreement with experimental results is obtained