WorldWideScience

Sample records for naked-eye optical flash

  1. TORTORA discovery of Naked-Eye Burst fast optical variability

    Science.gov (United States)

    Beskin, Grigory; Karpov, Sergey; Bondar, Sergey; Greco, Giuseppe; Guarnieri, Adriano; Bartolini, Corrado; Piccioni, Adalberto; Molinari, Emilio; Chincarini, Guido

    2008-10-01

    Features characterizing gamma-ray bursts in the different spectral bands may be a clue for the nature of their inner engine. Up to now, only several bursts have been observed in optical band during the gamma activity, and the only one-GRB080319B-was covered from rise till fall with high temporal resolution. Here we discuss these data, acquired with TORTORA fast wide-field monitoring optical camera, as well as results of its analysis. The camera observed the position of Naked-Eye Burst, GRB080318B, before, during and after the trigger. It detected the fast rise of optical emission, which reached the peak of V 5.3 at the eighteenth second, had a complex evolution till T+43s and monotonously faded then. The brightest part of the light curve contains two 15-20 s segments with different fluxes, each having two clearly-seen peaks of 5-8 s duration; all four peaks look quasi-periodic with separation of 9 s. There is no clear evidence of any sub-second variability. However, there are signs of quasi-periodic variability on 1s time scale at around the last peak (T+40 till T+50). The general properties of the optical light curve and its variability time scales look similar to the gamma one, but there is no clear correlation between them. This raises serious problems in interpretation of mechanisms generating such variability.

  2. Fast Optical Variability of a Naked-eye Burst—Manifestation of the Periodic Activity of an Internal Engine

    Science.gov (United States)

    Beskin, G.; Karpov, S.; Bondar, S.; Greco, G.; Guarnieri, A.; Bartolini, C.; Piccioni, A.

    2010-08-01

    We imaged the position of the naked-eye burst, GRB080319B, before, during, and after its gamma-ray activity with sub-second temporal resolution using the TORTORA wide-field camera. The burst optical prompt emission, which reached 5.3 mag, has been detected, and its periodic optical variability has been discovered in the form of four equidistant flashes with a duration of several seconds. We also detected a strong correlation (r ≈ 0.82) between optical and gamma-ray light curves with a 2 s delay of the optical emission with respect to the gamma-ray emission. The revealed temporal structure of the optical light curve in comparison with the gamma-ray light curve can be interpreted in the framework of the model of shell collisions in the ejecta containing a significant neutron component. All observed emission features reflect the non-stationary behavior of the burst internal engine—supposedly, a hyperaccreting solar-mass black hole formed in the collapse of a massive stellar core.

  3. FAST OPTICAL VARIABILITY OF A NAKED-EYE BURST-MANIFESTATION OF THE PERIODIC ACTIVITY OF AN INTERNAL ENGINE

    International Nuclear Information System (INIS)

    Beskin, G.; Karpov, S.; Bondar, S.; Greco, G.; Guarnieri, A.; Bartolini, C.; Piccioni, A.

    2010-01-01

    We imaged the position of the naked-eye burst, GRB080319B, before, during, and after its gamma-ray activity with sub-second temporal resolution using the TORTORA wide-field camera. The burst optical prompt emission, which reached 5.3 mag, has been detected, and its periodic optical variability has been discovered in the form of four equidistant flashes with a duration of several seconds. We also detected a strong correlation (r ∼ 0.82) between optical and gamma-ray light curves with a 2 s delay of the optical emission with respect to the gamma-ray emission. The revealed temporal structure of the optical light curve in comparison with the gamma-ray light curve can be interpreted in the framework of the model of shell collisions in the ejecta containing a significant neutron component. All observed emission features reflect the non-stationary behavior of the burst internal engine-supposedly, a hyperaccreting solar-mass black hole formed in the collapse of a massive stellar core.

  4. Early caries naked-eyed examination

    International Nuclear Information System (INIS)

    Bakhmutov, D; Gonchukov, S; Voytenok, O; Kharchenko, O; Zubov, B

    2008-01-01

    In view of its potential for dental diagnostics, noninvasive optical methods have been the object of research for the last years. Different techniques (spectroscopy, microscopy, and tomography) are used to discriminate between caries and sound enamel. The main aim of this paper is to determine a simple way to see incipient caries with the naked eye

  5. Naked-eye astronomy in mass tourism

    Directory of Open Access Journals (Sweden)

    Tadić Milutin

    2016-01-01

    Full Text Available This paper considers the possibility of developing astro-tourism in small countries such as Serbia and other Balkan countries, with "discreet" astro-tourism reduced to naked-eye astronomy as part of mass tourism rather than elite tourism that is realized through specialized programs with spacecraft and space stations, spectacular planetariums and observatories with giant telescopes. The specific relationship between the virtual and the real world is highlighted in this paper especially when considering younger generations. Furthermore, the differences in the way stars are perceived by astronomers and "ordinary" tourists or non-astronomers is also emphasized. Tourists are not enchanted by celestial bodies themselves, but by a complete scene, which consists of integrated skyscapes and landscapes, as a complex stage where in various combinations and forms these celestial bodies are observed, and of their own experience. These complex sky-earth landscapes, astro-landscapes, present astro-tourism resources of the small countries like Serbia, provided that a tourist can "read" their astronomical text. In this regard, Belgrade was used as the example for drafting a "package" of astronomical information that can be easily prepared and adapted according to the needs of a particular group, so that every tourist may know what can be seen, where and when. With the help of a rotating star map (planisphere, visitors may observe the sky with the naked eye.

  6. A naked-eye colorimetric "PCR developer"

    Science.gov (United States)

    Valentini, Paola; Pompa, Pier Paolo

    2016-04-01

    Despite several advances in molecular biology and diagnostics, Polymerase Chain Reaction (PCR) is currently the gold standard for nucleic acids amplification and detection, due to its versatility, low-cost and universality, with estimated market of several billion dollars/year. Nevertheless, PCR still relies on the laborious, time-consuming, and multi-step gel electrophoresis-based detection, which includes gel casting, electrophoretic run, gel staining, and gel visualization. In this work, we propose a "PCR developer", namely a universal one-step, one-tube method, based on controlled aggregation of gold nanoparticles (AuNPs), to detect PCR products by naked eye in few minutes, with no need for any instrumentation. We demonstrated the specificity and sensitivity of the PCR developer on different model targets, suitable for a qualitative detection in real-world diagnostics (i.e., gene rearrangements, genetically modified organisms, and pathogens). The PCR developer proved to be highly specific and ultra-sensitive, discriminating down to few copies of HIV viral DNA, diluted in an excess of interfering human genomic DNA, which is a clinically relevant viral load. Hence, it could be a valuable tool for both academic research and clinical applications.

  7. Two-Laser Interference Visible to the Naked Eye

    Science.gov (United States)

    Kawalec, Tomasz; Bartoszek-Bober, Dobroslawa

    2012-01-01

    An experimental setup allowing the observation of two-laser interference by the naked eye is described. The key concept is the use of an electronic phase lock between two external cavity diode lasers. The experiment is suitable both for undergraduate and graduate students, mainly in atomic physics laboratories. It gives an opportunity for…

  8. Luminous variable stars with naked eye: data reduction including extinction

    Science.gov (United States)

    Sigismondi, Costantino

    2014-05-01

    The observation of variable stars from urban contexts is hampered by city lights and field of view. Some bright stars like Betelgeuse and Antares are visible from the majority of cities, and during clear nights can be accurately estimated with the naked eye. The reference stars should be bright stars, not necessarily at the same altitude, including the atmospheric extinction in the data reduction. The software Stellarium 0.12.4 calculates well the standard atmospheric extinction with stars at least 10 degrees above the horizon. The accuracy of visual estimations is better than 0.1 magnitudes.

  9. The starry room naked eye astronomy in the intimate universe

    CERN Document Server

    Schaaf, Fred

    2002-01-01

    This inspiring and enriching book, a collection of essays that evokes the beauty and wonder of the night sky, explains to beginning skywatchers how to find and where to look for specific celestial objects. Author Fred Schaaf, once described as a naturalist in the tradition of Henry David Thoreau and John Burroughs, reveals an intense love of his subject and a keen knowledge of the optimum ways of viewing astronomical phenomena with the naked eye. Schaaf not only describes such special sights as an eyelash-thin moon, a shooting star, streaking comets, and a lunar eclipse, but he also explains w

  10. Naked-eye sensor for rapid determination of mercury ion.

    Science.gov (United States)

    Liu, Jing; Wu, Dapeng; Yan, Xiaohui; Guan, Yafeng

    2013-11-15

    A naked-eye paper sensor for rapid determination of trace mercury ion in water samples was designed and demonstrated. The mercury-sensing rhodamine B thiolactone was immobilized in silica matrices and the silica matrices were impregnated firmly and uniformly in the filter paper. As water samples flow through the filter paper, the membrane color will change from white to purple red, which could be observed obviously with naked eye, when concentration of mercury ions equals to or exceeds 10nM, the maximum residue level in drinking water recommended by U.S. EPA. The color change can also be recorded by a flatbed scanner and then digitized, reducing the detection limit of Hg(2+) down to 1.2 nM. Moreover, this method is extremely specific for Hg(2+) and shows a high tolerance ratio of interferent coexisting ions. The presence of Na(+) (2 mM), K(+) (2 mM), Fe(3+) (0.1 mM), Zn(2+) (0.1 mM), Mg(2+) (0.1 mM), Ni(2+) (50 μM), Co(2+) (50 μM), Cd(2+) (50 μM), Pb(2+) (50 μM), Cu(2+) (50 μM) and Ag(+) (3.5 μM) did not interfere with the detection of Hg(2+) (25 nM). Finally, the present method was applied in the detection of Hg(2+) in mineral water, tap water and pond water. Copyright © 2013 Elsevier B.V. All rights reserved.

  11. Observations of the Prompt Optical Emission of GRB 160625B with Mini-MegaTORTORA

    Science.gov (United States)

    Karpov, S.; Beskin, G.; Biryukov, A.; Bondar, S.; Ivanov, E.; Katkova, E.; Orekhova, N.; Perkov, A.; Sasyuk, V.

    2017-06-01

    Here we report our observations of bright optical flash coincident with Fermi GRB160625B using Mini-MegaTORTORA wide-field monitoring system. The prompt optical emission is correlated with gamma one and lags behind it for about 3 seconds, that suggests that optical and gamma emission are formed in different regions of the burst. The multiwavelength properties of this burst are very similar to ones of Naked-Eye Burst, GRB080319B, we detected earlier with TORTORA camera.

  12. Electrochromic Asymmetric Supercapacitor Windows Enable Direct Determination of Energy Status by the Naked Eye.

    Science.gov (United States)

    Zhong, Ying; Chai, Zhisheng; Liang, Zhimin; Sun, Peng; Xie, Weiguang; Zhao, Chuanxi; Mai, Wenjie

    2017-10-04

    Because of the popularity of smart electronics, multifunctional energy storage devices, especially electrochromic supercapacitors (SCs), have attracted tremendous research interest. Herein, a solid-state electrochromic asymmetric SC (ASC) window is designed and fabricated by introducing WO 3 and polyaniline as the negative and positive electrodes, respectively. The two complementary materials contribute to the outstanding electrochemical and electrochromic performances of the fabricated device. With an operating voltage window of 1.4 V and an areal capacitance of 28.3 mF cm -2 , the electrochromic devices show a high energy density of 7.7 × 10 -3 mW h cm -2 . Meanwhile, they exhibit an obvious and reversible color transition between light green (uncharged state) and dark blue (charged state), with an optical transmittance change between 55 and 12% at a wavelength of 633 nm. Hence, the energy storage level of the ASC is directly related to its color and can be determined by the naked eye, which means it can be incorporated with other energy cells to visual display their energy status. Particularly, a self-powered and color-indicated system is achieved by combining the smart windows with commercial solar cell panels. We believe that the novel electrochromic ASC windows will have great potential application for both smart electronics and smart buildings.

  13. Optical demonstration on Honeywell FLASH program

    Science.gov (United States)

    O'Rourke, Ken; Peterson, Eric

    1996-10-01

    Flight control system architects are increasingly integrating aircraft control and management functionality. This functional integration increases performance and cost of ownership requirements on the communication pathways. Optical signal transmission is an attractive approach to satisfying these system requirements. Investigations and demonstrations of optic signaling are needed to validate applicability of fiber based communication systems to the new system architecture performance and cost requirements. Honeywell's activities associated with the Fly-By-Light Advanced System Hardware (FLASH) program have produced a system including key optical interface elements and accomplished preliminary demonstrations needed to validate flexible, optical based aircraft control and avionic systems. The Honeywell Primary Flight Control System included Active Hand Controllers, Primary Flight Control Computers and smart actuation subsystem elements interfaced through various optical implementations and communication protocols. These successful implementations and demonstrations provide an excellent baseline for the processes, tools and materials required to make Fly-by-Light avionic systems marketable.

  14. Dew inspired breathing-based detection of genetic point mutation visualized by naked eye

    Science.gov (United States)

    Xie, Liping; Wang, Tongzhou; Huang, Tianqi; Hou, Wei; Huang, Guoliang; Du, Yanan

    2014-01-01

    A novel label-free method based on breathing-induced vapor condensation was developed for detection of genetic point mutation. The dew-inspired detection was realized by integration of target-induced DNA ligation with rolling circle amplification (RCA). The vapor condensation induced by breathing transduced the RCA-amplified variances in DNA contents into visible contrast. The image could be recorded by a cell phone for further or even remote analysis. This green assay offers a naked-eye-reading method potentially applied for point-of-care liver cancer diagnosis in resource-limited regions. PMID:25199907

  15. Naked eye picometer resolution in a Michelson interferometer using conjugated twisted beams.

    Science.gov (United States)

    Emile, Olivier; Emile, Janine

    2017-01-15

    Michelson interferometry is one of the most widely used techniques for accuracy measurements. Its main characteristic feature is to infer a displacement in one of the arms of the interferometer from a phase measurement. Two different twisted beams, also called vortex beams, with opposite twisted rotations in each arm of the interferometer interfere in a daisy flower-like pattern. The number of petals is twice the topological charge. Their position depends on the relative phase of the beams. Naked eye detection of 44 pm displacements is achieved. The sensitivity of such an interferometer together with possible further improvements, and applications are then discussed.

  16. The Evolution and Structure of Extreme Optical Lightning Flashes.

    Science.gov (United States)

    Peterson, Michael; Rudlosky, Scott; Deierling, Wiebke

    2017-12-27

    This study documents the composition, morphology, and motion of extreme optical lightning flashes observed by the Lightning Imaging Sensor (LIS). The furthest separation of LIS events (groups) in any flash is 135 km (89 km), the flash with the largest footprint had an illuminated area of 10,604 km 2 , and the most dendritic flash has 234 visible branches. The longest-duration convective LIS flash lasted 28 s and is overgrouped and not physical. The longest-duration convective-to-stratiform propagating flash lasted 7.4 s, while the longest-duration entirely stratiform flash lasted 4.3 s. The longest series of nearly consecutive groups in time lasted 242 ms. The most radiant recorded LIS group (i.e., "superbolt") is 735 times more radiant than the average group. Factors that impact these optical measures of flash morphology and evolution are discussed. While it is apparent that LIS can record the horizontal development of the lightning channel in some cases, radiative transfer within the cloud limits the flash extent and level of detail measured from orbit. These analyses nonetheless suggest that lightning imagers such as LIS and Geostationary Lightning Mapper can complement ground-based lightning locating systems for studying physical lightning phenomena across large geospatial domains.

  17. The Evolution and Structure of Extreme Optical Lightning Flashes

    Science.gov (United States)

    Peterson, Michael; Rudlosky, Scott; Deierling, Wiebke

    2017-12-01

    This study documents the composition, morphology, and motion of extreme optical lightning flashes observed by the Lightning Imaging Sensor (LIS). The furthest separation of LIS events (groups) in any flash is 135 km (89 km), the flash with the largest footprint had an illuminated area of 10,604 km2, and the most dendritic flash has 234 visible branches. The longest-duration convective LIS flash lasted 28 s and is overgrouped and not physical. The longest-duration convective-to-stratiform propagating flash lasted 7.4 s, while the longest-duration entirely stratiform flash lasted 4.3 s. The longest series of nearly consecutive groups in time lasted 242 ms. The most radiant recorded LIS group (i.e., "superbolt") is 735 times more radiant than the average group. Factors that impact these optical measures of flash morphology and evolution are discussed. While it is apparent that LIS can record the horizontal development of the lightning channel in some cases, radiative transfer within the cloud limits the flash extent and level of detail measured from orbit. These analyses nonetheless suggest that lightning imagers such as LIS and Geostationary Lightning Mapper can complement ground-based lightning locating systems for studying physical lightning phenomena across large geospatial domains.

  18. Naked eye observations for morning twilight at different sites in Egypt

    Directory of Open Access Journals (Sweden)

    A.H. Hassan

    2014-06-01

    Full Text Available Twilight observations were carried out in the period between 1984 and 1987 in different seasons at different sites of Egypt (Baharia, Matrouh, Kottamia and Aswan through a cooperation project between Dar El-Iftaa’ and the Egyptian Academy of Scientific Research and Technology. Naked eye observations of the first light of the dawn were done in parallel to the photoelectric measurements of the twilight phenomena. The depression of the sun below the horizon corresponding to the first light was calculated from the time of observations. Our estimates show that the normal eye can just discriminate the dawn (the first white light thread at a depression of 14.7° with a maximum value of 15.08° and a minimum value of 12.01°. This result agrees with result obtained by our previous photoelectric measurements.

  19. Naked eye observations for morning twilight at different sites in Egypt

    Science.gov (United States)

    Hassan, A. H.; Abdel-Hadi, Yasser A.; Issa, I. A.; Hassanin, N. Y.

    2014-06-01

    Twilight observations were carried out in the period between 1984 and 1987 in different seasons at different sites of Egypt (Baharia, Matrouh, Kottamia and Aswan) through a cooperation project between Dar El-Iftaa’ and the Egyptian Academy of Scientific Research and Technology. Naked eye observations of the first light of the dawn were done in parallel to the photoelectric measurements of the twilight phenomena. The depression of the sun below the horizon corresponding to the first light was calculated from the time of observations. Our estimates show that the normal eye can just discriminate the dawn (the first white light thread) at a depression of 14.7° with a maximum value of 15.08° and a minimum value of 12.01°. This result agrees with result obtained by our previous photoelectric measurements.

  20. Phage-mediated counting by the naked eye of miRNA molecules at attomolar concentrations in a Petri dish

    Science.gov (United States)

    Zhou, Xin; Cao, Peng; Zhu, Ye; Lu, Wuguang; Gu, Ning; Mao, Chuanbin

    2015-10-01

    The ability to count biomolecules such as cancer-biomarker miRNAs with the naked eye is seemingly impossible in molecular diagnostics. Here, we show an ultrasensitive naked-eye-counting strategy for quantifying miRNAs by employing T7 phage--a bacteria-specific virus nanoparticle--as a surrogate. The phage is genetically engineered to become fluorescent and capable of binding a miRNA-capturing gold nanoparticle (GNP) in a one-to-one manner. Target miRNAs crosslink the resultant phage-GNP couple and miRNA-capturing magnetic microparticles, forming a sandwich complex containing equimolar phage and miRNA. The phage is then released from the complex and developed into one macroscopic fluorescent plaque in a Petri dish by plating it in a host bacterial medium. Counting the plaques by the naked eye enables the quantification of miRNAs with detection limits of ~3 and ~5 aM for single-target and two-target miRNAs, respectively. This approach offers ultrasensitive and convenient quantification of disease biomarkers by the naked eye.

  1. Phage-mediated counting by the naked eye of miRNA molecules at attomolar concentrations in a Petri dish.

    Science.gov (United States)

    Zhou, Xin; Cao, Peng; Zhu, Ye; Lu, Wuguang; Gu, Ning; Mao, Chuanbin

    2015-10-01

    The ability to count biomolecules such as cancer-biomarker miRNAs with the naked eye is seemingly impossible in molecular diagnostics. Here, we show an ultrasensitive naked-eye-counting strategy for quantifying miRNAs by employing T7 phage-a bacteria-specific virus nanoparticle-as a surrogate. The phage is genetically engineered to become fluorescent and capable of binding a miRNA-capturing gold nanoparticle (GNP) in a one-to-one manner. Target miRNAs crosslink the resultant phage-GNP couple and miRNA-capturing magnetic microparticles, forming a sandwich complex containing equimolar phage and miRNA. The phage is then released from the complex and developed into one macroscopic fluorescent plaque in a Petri dish by plating it in a host bacterial medium. Counting the plaques by the naked eye enables the quantification of miRNAs with detection limits of ∼3 and ∼5 aM for single-target and two-target miRNAs, respectively. This approach offers ultrasensitive and convenient quantification of disease biomarkers by the naked eye.

  2. CONSTRAINTS ON THE EMISSION MODEL OF THE 'NAKED-EYE BURST' GRB 080319B

    Energy Technology Data Exchange (ETDEWEB)

    Abdo, A. A.; Abeysekara, A. U.; Linnemann, J. T. [Department of Physics and Astronomy, Michigan State University, 3245 BioMedical Physical Sciences Building, East Lansing, MI 48824 (United States); Allen, B. T.; Chen, C. [Department of Physics and Astronomy, University of California, Irvine, CA 92697 (United States); Aune, T. [Santa Cruz Institute for Particle Physics, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States); Berley, D.; Goodman, J. A. [Department of Physics, University of Maryland, College Park, MD 20742 (United States); Christopher, G. E.; Kolterman, B. E.; Mincer, A. I. [Department of Physics, New York University, 4 Washington Place, New York, NY 10003 (United States); DeYoung, T. [Department of Physics, Pennsylvania State University, University Park, PA 16802 (United States); Dingus, B. L.; Hoffman, C. M. [Group P-23, Los Alamos National Laboratory, P.O. Box 1663, Los Alamos, NM 87545 (United States); Ellsworth, R. W. [School of Physics, Astronomy and Computational Sciences, George Mason University, Fairfax, VA 22030 (United States); Gonzalez, M. M. [Instituto de Astronomia, Universidad Nacional Autonoma de Mexico, D.F., Mexico 04510 (Mexico); Granot, J. [Open University of Israel, 1 University Road, POB 808, Ra' anana 43537 (Israel); Hays, E.; McEnery, J. E. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Huentemeyer, P. H. [Department of Physics, Michigan Technological University, Houghton, MI 49931 (United States); and others

    2012-07-10

    On 2008 March 19, one of the brightest gamma-ray bursts (GRBs) ever recorded was detected by several ground- and space-based instruments spanning the electromagnetic spectrum from radio to gamma rays. With a peak visual magnitude of 5.3, GRB 080319B was dubbed the 'naked-eye' GRB, as an observer under dark skies could have seen the burst without the aid of an instrument. Presented here are results from observations of the prompt phase of GRB 080319B taken with the Milagro TeV observatory. The burst was observed at an elevation angle of 47 Degree-Sign . Analysis of the data is performed using both the standard air shower method and the scaler or single-particle technique, which results in a sensitive energy range that extends from {approx}5 GeV to >20 TeV. These observations provide the only direct constraints on the properties of the high-energy gamma-ray emission from GRB 080319B at these energies. No evidence for emission is found in the Milagro data, and upper limits on the gamma-ray flux above 10 GeV are derived. The limits on emission between {approx}25 and 200 GeV are incompatible with the synchrotron self-Compton model of gamma-ray production and disfavor a corresponding range (2 eV-16 eV) of assumed synchrotron peak energies. This indicates that the optical photons and soft ({approx}650 keV) gamma rays may not be produced by the same electron population.

  3. Broadband observations of the naked-eye gamma-ray burst GRB 080319B.

    Science.gov (United States)

    Racusin, J L; Karpov, S V; Sokolowski, M; Granot, J; Wu, X F; Pal'shin, V; Covino, S; van der Horst, A J; Oates, S R; Schady, P; Smith, R J; Cummings, J; Starling, R L C; Piotrowski, L W; Zhang, B; Evans, P A; Holland, S T; Malek, K; Page, M T; Vetere, L; Margutti, R; Guidorzi, C; Kamble, A P; Curran, P A; Beardmore, A; Kouveliotou, C; Mankiewicz, L; Melandri, A; O'Brien, P T; Page, K L; Piran, T; Tanvir, N R; Wrochna, G; Aptekar, R L; Barthelmy, S; Bartolini, C; Beskin, G M; Bondar, S; Bremer, M; Campana, S; Castro-Tirado, A; Cucchiara, A; Cwiok, M; D'Avanzo, P; D'Elia, V; Valle, M Della; de Ugarte Postigo, A; Dominik, W; Falcone, A; Fiore, F; Fox, D B; Frederiks, D D; Fruchter, A S; Fugazza, D; Garrett, M A; Gehrels, N; Golenetskii, S; Gomboc, A; Gorosabel, J; Greco, G; Guarnieri, A; Immler, S; Jelinek, M; Kasprowicz, G; La Parola, V; Levan, A J; Mangano, V; Mazets, E P; Molinari, E; Moretti, A; Nawrocki, K; Oleynik, P P; Osborne, J P; Pagani, C; Pandey, S B; Paragi, Z; Perri, M; Piccioni, A; Ramirez-Ruiz, E; Roming, P W A; Steele, I A; Strom, R G; Testa, V; Tosti, G; Ulanov, M V; Wiersema, K; Wijers, R A M J; Winters, J M; Zarnecki, A F; Zerbi, F; Mészáros, P; Chincarini, G; Burrows, D N

    2008-09-11

    Long-duration gamma-ray bursts (GRBs) release copious amounts of energy across the entire electromagnetic spectrum, and so provide a window into the process of black hole formation from the collapse of massive stars. Previous early optical observations of even the most exceptional GRBs (990123 and 030329) lacked both the temporal resolution to probe the optical flash in detail and the accuracy needed to trace the transition from the prompt emission within the outflow to external shocks caused by interaction with the progenitor environment. Here we report observations of the extraordinarily bright prompt optical and gamma-ray emission of GRB 080319B that provide diagnostics within seconds of its formation, followed by broadband observations of the afterglow decay that continued for weeks. We show that the prompt emission stems from a single physical region, implying an extremely relativistic outflow that propagates within the narrow inner core of a two-component jet.

  4. Synthesis and characterization of azo-guanidine based alcoholic media naked eye DNA sensor

    Science.gov (United States)

    Hashmat, Uzma; Yousaf, Muhammad; Lal, Bhajan; Ullah, Shafiq; Holder, Alvin A.; Badshah, Amin

    2016-01-01

    DNA sensing always has an open meadow of curiosity for biotechnologists and other researchers. Recently, in this field, we have introduced an emerging class of molecules containing azo and guanidine functionalities. In this study, we have synthesized three new compounds (UA1, UA6 and UA7) for potential application in DNA sensing in alcoholic medium. The synthesized materials were characterized by elemental analysis, FTIR, UV-visible, 1H NMR and 13C NMR spectroscopies. Their DNA sensing potential were investigated by UV-visible spectroscopy. The insight of interaction with DNA was further investigated by electrochemical (cyclic voltammetry) and hydrodynamic (viscosity) studies. The results showed that compounds have moderate DNA binding properties, with the binding constants range being 7.2 × 103, 2.4 × 103 and 0.2 × 103 M−1, for UA1, UA6 and UA7, respectively. Upon binding with DNA, there was a change in colour (a blue shift in the λmax value) which was observable with a naked eye. These results indicated the potential of synthesized compounds as DNA sensors with detection limit 1.8, 5.8 and 4.0 ng µl−1 for UA1, UA6 and UA7, respectively. PMID:28018613

  5. A Rapid In Situ Colorimetric Assay for Cobalt Detection by the Naked Eye

    Directory of Open Access Journals (Sweden)

    Sung-Min Kang

    2016-05-01

    Full Text Available A simple, rapid, and convenient colorimetric chemosensor of a specific target toward the end user is still required for on-site detection and real-time monitoring applications. In this study, we developed a rapid in situ colorimetric assay for cobalt detection using the naked eye. Interestingly, a yellow to light orange visual color transition was observed within 3 s when a Chrysoidine G (CG chemosensor was exposed to cobalt. Surprisingly, the CG chemosensor had great selectivity toward cobalt without any interference of other metal ions. Under optimized conditions, a lower detection limit of 0.1 ppm via a spectrophotometer and a visual detection limit of 2 ppm with a linear range from 0.4 to 1 ppm (R2 = 0.97 were determined. Moreover, the CG chemosensor is reversible and maintains its functionality after treatment with chelating agents. In conclusion, we show the superior capabilities of the CG chemosensor, which has the potential to provide extremely facile handling, high sensitivity, and a fast response time for applications of on-site detection to real-time cobalt monitoring for the general public.

  6. Simultaneous Detection of Multiple Fish Pathogens Using a Naked-Eye Readable DNA Microarray

    Directory of Open Access Journals (Sweden)

    King-Jung Lin

    2012-02-01

    Full Text Available We coupled 16S rDNA PCR and DNA hybridization technology to construct a microarray for simultaneous detection and discrimination of eight fish pathogens (Aeromonas hydrophila, Edwardsiella tarda, Flavobacterium columnare, Lactococcus garvieae, Photobacterium damselae, Pseudomonas anguilliseptica, Streptococcus iniae and Vibrio anguillarum commonly encountered in aquaculture. The array comprised short oligonucleotide probes (30 mer complementary to the polymorphic regions of 16S rRNA genes for the target pathogens. Targets annealed to the microarray probes were reacted with streptavidin-conjugated alkaline phosphatase and nitro blue tetrazolium/5-bromo-4-chloro-3′-indolylphosphate, p-toluidine salt (NBT/BCIP, resulting in blue spots that are easily visualized by the naked eye. Testing was performed against a total of 168 bacterial strains, i.e., 26 representative collection strains, 81 isolates of target fish pathogens, and 61 ecologically or phylogenetically related strains. The results showed that each probe consistently identified its corresponding target strain with 100% specificity. The detection limit of the microarray was estimated to be in the range of 1 pg for genomic DNA and 103 CFU/mL for pure pathogen cultures. These high specificity and sensitivity results demonstrate the feasibility of using DNA microarrays in the diagnostic detection of fish pathogens.

  7. Honeywell FLASH fiber optic motherboard evaluations

    Science.gov (United States)

    Stange, Kent

    1996-10-01

    The use of fiber optic data transmission media can make significant contributions in achieving increasing performance and reduced life cycle cost requirements placed on commercial and military transport aircraft. For complete end-to-end fiber optic transmission, photonics technologies and techniques need to be understood and applied internally to the aircraft line replaceable units as well as externally on the interconnecting aircraft cable plant. During a portion of the Honeywell contribution to Task 2A on the Fly- by-Light Advanced System Hardware program, evaluations were done on a fiber optic transmission media implementation internal to a Primary Flight Control Computer (PFCC). The PFCC internal fiber optic transmission media implementation included a fiber optic backplane, an optical card-edge connector, and an optical source/detector coupler/installation. The performance of these optical media components were evaluated over typical aircraft environmental stresses of temperature, vibration, and humidity. These optical media components represent key technologies to the computer end-to-end fiber optic transmission capability on commercial and military transport aircraft. The evaluations and technical readiness assessments of these technologies will enable better perspectives on productization of fly-by-light systems requiring their utilizations.

  8. The bright optical flash from GRB 060117

    Czech Academy of Sciences Publication Activity Database

    Jelínek, M.; Prouza, Michael; Kubánek, Petr; Hudec, René; Nekola, Martin; Řídký, Jan; Grygar, Jiří; Boháčová, Martina; Castro-Tirado, A.J.; Gorosabel, J.; Hrabovský, Miroslav; Mandát, Dušan; Nosek, D.; Nožka, Libor; Palatka, Miroslav; Pandey, S.B.; Pech, Miroslav; Schovánek, Petr; Šmída, Radomír; Trávníček, Petr; de Ugarte Postigo, A.; Vítek, S.

    2006-01-01

    Roč. 454, - (2006), L119-L122 ISSN 0004-6361 R&D Projects: GA MŠk(CZ) LC527; GA MŠk LA 134; GA AV ČR KJB300100502; GA AV ČR IAA3003206 Institutional research plan: CEZ:AV0Z10100502; CEZ:AV0Z10030501 Keywords : Gamma Ray Bursts * prompt optical emission * optical transient Subject RIV: BH - Optics, Masers, Lasers Impact factor: 3.971, year: 2006

  9. Hemoglobinopathy screening by osmotic fragility test based on flow cytometer or naked eye.

    Science.gov (United States)

    Mohapatra, Rinkle; Warang, Prashant; Ghosh, Kanjaksha; Colah, Roshan

    2016-05-01

    Diagnosis of hemoglobin (Hb) disorders is based mostly on abnormal red blood cell (RBC) indices, elevated levels of HbA2, HbF, or any other Hb on the Variant high performance liquid chromatography (HPLC) system, and confirmation by molecular methods. However, large scale population screening is of prime importance and requires a simple, accurate, and cost effective technique. We have tried to compare the sensitivity of the widely used Naked Eye Single Tube Red Cell Osmotic Fragility Test (NESTROFT) and the osmotic fragility described as % residual RBCs through flow cytometry for population screening. The count of residual red cells was measured sequentially in real-time using flow cytometry. NESTROFT was performed using a 0.36% buffered saline. HbA2 and HbF levels along with other abnormal Hbs were determined on the Variant HPLC System. Molecular studies were done to confirm the diagnosis. The normal group showed a significantly lower percentage of residual RBCs (48.08 ± 11.87) as compared to cases (β thalassemia trait-82.97 ± 12.20, α thalassemia trait-72.58 ± 8.34, and HbS trait-85.00 ± 4.05). The sensitivity and specificity of NESTROFT was high for both β thalassemia traits (98.33 and 96.72%, respectively) and α thalassemia traits (100 and 96.72%, respectively) but very low sensitivity for HbS traits (54.84%). Flow cytometric osmotic fragility was a more sensitive method to discriminate normal from the group of hemoglobinopathy carriers as compared to NESTROFT which missed majority of HbS carriers. However, in view of feasibility and cost effectiveness, NESTROFT could still be used for population screening of thalassemia. © 2014 International Clinical Cytometry Society. © 2014 International Clinical Cytometry Society.

  10. Non-parametric Data Analysis of Low-latitude Auroras and Naked-eye Sunspots in the Medieval Epoch

    Science.gov (United States)

    Bekli, Mohamed Reda; Zougab, Nabil; Belabbas, Abdelmoumene; Chadou, Ilhem

    2017-04-01

    We have studied solar activity by analyzing naked-eye sunspot observations and aurorae borealis observed at latitudes below 45°. We focused on the medieval epoch by considering the non-telescopic observations of sunspots from AD 974 to 1278 and aurorae borealis from AD 965 to 1273 that are reported in several Far East historical sources, primarily in China and Korea. After setting selection rules, we analyzed the distribution of these individual events following the months of the Gregorian calendar. In December, an unusual peak is observed with data recorded in both China and Japan, but not within Korean data.

  11. Optical emission from Al target irradiated by FLASH

    International Nuclear Information System (INIS)

    Stránský, M; Rohlena, K

    2014-01-01

    The following text touches on some peculiarities in optical emission spectroscopy results from experiments on the free-electron laser FLASH [1, 2]. Aluminum targets were irradiated with 13.5 nm ∼ 25 fs pulses at intensities of 10 13 and 10 16 W/cm 2 (20 and 1 μm foci). Surprisingly, only neutral atom lines for the case with wider focus and traces of ion lines in the tighter focus case were observed with the optical emission spectroscopy (200–600 nm range), [2]. The motivating idea behind this work is the suggestion in [1] by Zastrau that the optical spectrometer sees only emissions from a cold expanding lower-density (< 10 22 cm −3 ) plasma plume. In this contribution the notion of UV range screening is analyzed in detail.

  12. Flash spectral imaging for optical metrology of solar cells

    Science.gov (United States)

    Ho, Jian Wei; Koh, Jessica Li Jian; Wong, Johnson Kai Chi; Raj, Samuel; Janssen, Eric; Aberle, Armin G.

    2017-08-01

    Flash spectral imaging of full area (156 mm by 156 mm) silicon solar wafers and cells is realized in a setup integrating pseudo-monochromatic LEDs over the wavelength range of 370 to 1050 nm and a high-resolution monochrome camera. The captured information allows the computation of sample reflectance as a function of wavelength and coordinates, thereby constituting a spectral reflectance map. The derived values match that obtained from monochromator-based measurements. Optical inspection is then based on the characteristic reflectance of surface features at optimally contrasting wavelengths. The technique reveals otherwise hidden stains and anti-reflection coating (ARC) non-uniformities, and enable more selective visualization of grains in multicrystalline Si wafers. Optical contrast enhancement of metallization significantly improves accuracy of metal detection. The high effective resolution of the monochrome camera also allows fine metallization patterns to be measured. The rapid succession of flash-and-image-capture at each wavelength makes the reported optical metrology technique amenable in photovoltaic manufacturing for solar wafers/cells sorting, monitoring and optimization of processes.

  13. 'Naked-eye' detection of biologically important anions in aqueous media by colorimetric receptor and its real life applications

    Science.gov (United States)

    Singh, Archana; Trivedi, Darshak R.

    2017-05-01

    A colorimetric receptor R 2-[(2-Hydroxy-naphthalen-1-ylmethylene)-hydrazonomethyl]-quinolin-8-ol has been designed and synthesized with good yield and characterized by the standard spectroscopic techniques such as FT-IR, UV-Visible, 1H NMR, 13C NMR and ESI-MS. The receptor R showed naked-eye detection and spectral change in the presence of F-, AcO- and H2PO4- over other anions. Interestingly, receptor R displaying high selective recognition towards F-, AcO- ion with a drastic color change from pale yellow to red in dry DMSO solvent and orange in mixed solvent DMSO/H2O (9:1, v/v). The behavior of receptor R towards F-, AcO- ion was investigated using UV-Vis and 1H NMR experiment. The detailed 1H NMR experiment result revealed that the receptor R is forming the hydrogen bonding between imine nitrogen and phenolic sbnd OH proton towards anions. The receptor R is able to detect sodium salts of flouride (NaF) and acetate (NaAcO) in aqueous medium and it exhibited dramatic color change from pale yellow to red. The receptor R demonstrated itself to be useful for real life application by detecting flouride and acetate ion in sea-water and commercially available product such as toothpaste, mouthwash and vinegar solution.

  14. THE PROMPT, HIGH-RESOLUTION SPECTROSCOPIC VIEW OF THE 'NAKED-EYE' GRB080319B

    International Nuclear Information System (INIS)

    D'Elia, V.; Fiore, F.; Nicastro, F.; Antonelli, L. A.; Guetta, D.; Perna, R.; Lazzati, D.; Krongold, Y.; Covino, S.; Fugazza, D.; Campana, S.; Chincarini, G.; D'Avanzo, P.; Guidorzi, C.; Molinari, E.; Valle, M. Della; Goldoni, P.; Meurs, E. J. A.; Mirabel, F.; Norci, L.

    2009-01-01

    GRB080319B reached fifth optical magnitude during the burst prompt emission. Thanks to the Very Large Telescope (VLT)/Ultraviolet and Visual Echelle Spectrograph (UVES) rapid response mode, we observed its afterglow just 8m:30s after the gamma-ray burst (GRB) onset when the magnitude was R ∼ 12. This allowed us to obtain the best signal-to-noise (S/N), high-resolution spectrum of a GRB afterglow ever (S/N per resolution element ∼50). The spectrum is rich of absorption features belonging to the main system at z = 0.937, divided in at least six components spanning a total velocity range of 100 km s -1 . The VLT/UVES observations caught the absorbing gas in a highly excited state, producing the strongest Fe II fine structure lines ever observed in a GRB. A few hours later, the optical depth of these lines was reduced by a factor of 4-20, and the optical/UV flux by a factor of ∼60. This proves that the excitation of the observed fine structure lines is due to 'pumping' by the GRB UV photons. A comparison of the observed ratio between the number of photons absorbed by the excited state and those in the Fe II ground state suggests that the six absorbers are ∼2-6 kpc from the GRB site, with component I ∼ 3 times closer to the GRB site than components III-VI. Component I is characterized also by the lack of Mg I absorption, unlike all other components. This may be both due to a closer distance and a lower density, suggesting a structured interstellar matter in this galaxy complex.

  15. A phenolic acid based colourimetric 'naked-eye' chemosensor for the rapid detection of Cu(II) ions.

    Science.gov (United States)

    Sengupta, Priti; Ganguly, Aniruddha; Bose, Adity

    2018-03-03

    The crucial role of chemosensor for the immediate recognition of environment pollutant motivates the researchers to develop variety of sensing protocols. Of various chemosensory protocols, the colour change observed by the naked eye is considered to be a conceivable and on-site way to indicate the presence of an analyte. We herein report a colourimetric and commercially available absorption probe, sinapic acid (SA) that is completely ready to use for "on-site" visual determination of copper ions. The molecule, SA is well-known phenolic acid, often utilized for its antibacterial activity. In this work, for the first time, we are exploring its ability to work as an efficient Cu 2+ sensor. This sensor molecule selectively detected Cu 2+ ions by changing its colour from colourless to pink within detection limit of 64.5nM, which is much lower than other reported sensor molecules and the suggested limit by World Health Organization (WHO) and U. S. Environmental Protection Agency (EPA) guidelines. The sensing mechanism was investigated through UV-vis and 1 H NMR titration along with ESI-MS spectroscopy and further confirmed by DFT computational studies. Studies revealed the participation of hydroxyl group (OH) and methoxy group (OMe) of SA in complexation with Cu 2+ . The binding stoichiometry of SA to Cu 2+ was found to be 1:2 through Job's plot and ESI-MS analysis. Importantly, paper strips of SA were prepared which could be used for a rapid "on-site" determination of Cu 2+ containing samples. Copyright © 2018 Elsevier B.V. All rights reserved.

  16. Electro-optic methods for longitudinal bunch diagnostics at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Steffen, B.R.

    2007-07-15

    Precise measurements of the temporal profile of sub-picosecond electron bunches are of high interest for the optimization and operation of VUV and X-ray free electron lasers. In this thesis, the shortest electro-optic signals measured so far for electron bunch diagnostics are presented, reaching a time resolution of better than 50 fs (rms). The e ects that introduce signal distortions and limit the time resolution are studied in numerical simulations for different electro-optic detection materials and techniques. The time resolution is mainly limited by lattice resonances of the electro-optic crystal. Electro-optic signals as short as 54 fs (rms) are obtained with gallium phosphide (GaP) crystals in a crossed polarizer detection scheme using temporally resolved electro-optic detection. Measuring near crossed polarization, where the electro-optic signal is proportional to the velocity field of the relativistic electron bunch, the shortest obtained signal width is 70 fs (rms). The electro-optic signals are compared to electron bunch shapes that are measured simultaneously with a transverse deflecting structure with 20 fs resolution. Numerical simulations using the bunch shapes as determined with the transverse deflecting cavity as input data are in excellent agreement with electro-optical signals obtained with GaP, both for temporally and spectrally resolved measurements. In the case of zinc telluride (ZnTe) the observed signals are slightly broader and significantly smaller than expected from simulations. These discrepancies are probably due to the poor optical quality of the available ZnTe crystals. (orig.)

  17. Electro-optic methods for longitudinal bunch diagnostics at FLASH

    International Nuclear Information System (INIS)

    Steffen, B.R.

    2007-07-01

    Precise measurements of the temporal profile of sub-picosecond electron bunches are of high interest for the optimization and operation of VUV and X-ray free electron lasers. In this thesis, the shortest electro-optic signals measured so far for electron bunch diagnostics are presented, reaching a time resolution of better than 50 fs (rms). The e ects that introduce signal distortions and limit the time resolution are studied in numerical simulations for different electro-optic detection materials and techniques. The time resolution is mainly limited by lattice resonances of the electro-optic crystal. Electro-optic signals as short as 54 fs (rms) are obtained with gallium phosphide (GaP) crystals in a crossed polarizer detection scheme using temporally resolved electro-optic detection. Measuring near crossed polarization, where the electro-optic signal is proportional to the velocity field of the relativistic electron bunch, the shortest obtained signal width is 70 fs (rms). The electro-optic signals are compared to electron bunch shapes that are measured simultaneously with a transverse deflecting structure with 20 fs resolution. Numerical simulations using the bunch shapes as determined with the transverse deflecting cavity as input data are in excellent agreement with electro-optical signals obtained with GaP, both for temporally and spectrally resolved measurements. In the case of zinc telluride (ZnTe) the observed signals are slightly broader and significantly smaller than expected from simulations. These discrepancies are probably due to the poor optical quality of the available ZnTe crystals. (orig.)

  18. A rapid, naked-eye detection of hypochlorite and bisulfite using a robust and highly-photostable indicator dye Quinaldine Red in aqueous medium

    Science.gov (United States)

    Dutta, Tanoy; Chandra, Falguni; Koner, Apurba L.

    2018-02-01

    A ;naked-eye; detection of health hazardous bisulfite (HSO3-) and hypochlorite (ClO-) using an indicator dye (Quinaldine Red, QR) in a wide range of pH is demonstrated. The molecule contains a quinoline moiety linked to an N,N-dimethylaniline moiety with a conjugated double bond. Treatment of QR with HSO3- and ClO-, in aqueous solution at near-neutral pH, resulted in a colorless product with high selectivity and sensitivity. The detection limit was 47.8 μM and 0.2 μM for HSO3- and ClO- respectively. However, ClO- was 50 times more sensitive and with 2 times faster response compared to HSO3-. The detail characterization and related analysis demonstrate the potential of QR for a rapid, robust and highly efficient colorimetric sensor for the practical applications to detect hypochlorite in water samples.

  19. Electro-optic sampling of THz pulses at the CTR source at FLASH

    International Nuclear Information System (INIS)

    Wunderlich, Steffen

    2012-06-01

    Several applications in material science, non-linear optics and solid-state physics require short pulses with a high pulse energy of radiation in the far-infrared and in the terahertz (THz) regime in particular. As described in the following, coherent transition radiation generated by high-relativistic electron bunches at FLASH provides broadband single-cycle pulses of sub-picosecond length. The pulses are characterized using the quantitative and time-resolved technique of electro-optic sampling showing peak field strengths in the order of 1 MV/cm.

  20. Electro-optic sampling of THz pulses at the CTR source at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Wunderlich, Steffen

    2012-06-15

    Several applications in material science, non-linear optics and solid-state physics require short pulses with a high pulse energy of radiation in the far-infrared and in the terahertz (THz) regime in particular. As described in the following, coherent transition radiation generated by high-relativistic electron bunches at FLASH provides broadband single-cycle pulses of sub-picosecond length. The pulses are characterized using the quantitative and time-resolved technique of electro-optic sampling showing peak field strengths in the order of 1 MV/cm.

  1. Tree-based solvers for adaptive mesh refinement code FLASH - I: gravity and optical depths

    Science.gov (United States)

    Wünsch, R.; Walch, S.; Dinnbier, F.; Whitworth, A.

    2018-04-01

    We describe an OctTree algorithm for the MPI parallel, adaptive mesh refinement code FLASH, which can be used to calculate the gas self-gravity, and also the angle-averaged local optical depth, for treating ambient diffuse radiation. The algorithm communicates to the different processors only those parts of the tree that are needed to perform the tree-walk locally. The advantage of this approach is a relatively low memory requirement, important in particular for the optical depth calculation, which needs to process information from many different directions. This feature also enables a general tree-based radiation transport algorithm that will be described in a subsequent paper, and delivers excellent scaling up to at least 1500 cores. Boundary conditions for gravity can be either isolated or periodic, and they can be specified in each direction independently, using a newly developed generalization of the Ewald method. The gravity calculation can be accelerated with the adaptive block update technique by partially re-using the solution from the previous time-step. Comparison with the FLASH internal multigrid gravity solver shows that tree-based methods provide a competitive alternative, particularly for problems with isolated or mixed boundary conditions. We evaluate several multipole acceptance criteria (MACs) and identify a relatively simple approximate partial error MAC which provides high accuracy at low computational cost. The optical depth estimates are found to agree very well with those of the RADMC-3D radiation transport code, with the tree-solver being much faster. Our algorithm is available in the standard release of the FLASH code in version 4.0 and later.

  2. Progress on the Flash X-Ray Optical Transition Radiation Diagnostic

    Energy Technology Data Exchange (ETDEWEB)

    Tang, V; Houck, T; Brown, C

    2008-03-30

    This document summarizes the Flash X-Ray accelerator (FXR) optical transition radiation (OTR) spot-size diagnostics efforts in FY07. During this year, new analysis, simulation, and experimental approaches were utilized to interpret OTR spot data from both dielectric foils such as Kapton (VN type) and metal coated foils. Significant new findings of the intricacies involved in the diagnostic and of FXR operational issues were achieved. Geometry and temperature based effects were found to affect the beam image profiles from the OTR foils. These effects must be taken into account in order to deduce accurately the beam current density profile.

  3. A simple, reversible, colorimetric and water-soluble fluorescent chemosensor for the naked-eye detection of Cu2 + in 100% aqueous media and application to real samples

    Science.gov (United States)

    Sun, Tao; Niu, Qingfen; Li, Tianduo; Guo, Zongrang; Liu, Haixia

    2018-01-01

    A simple, reversible, colorimetric and water-soluble fluorescent chemosensor ADA for the naked-eye detection of Cu2 + was developed. Sensor ADA showed high selectivity and sensitivity toward Cu2 + in 100% aqueous media over wide pH range. Sensor ADA exhibited a red-shift in the absorption spectra from 466 to 480 nm that is accompanied by significant color change from light yellow to yellowish brown instantaneously. The Cu2 + recognition is based on the chelation-enhanced fluorescence quenching (CHEQ) effect of the paramagnetic nature. The lowest detection limit is determined to be 15.8 nM, which is much lower than the allowable level of Cu2 + in drinking water set by U.S. Environmental Protection Agency ( 20 μM) and the World Health Organization ( 30 μM). The 1:1 binding process was confirmed by fluorescence measurements, IR analysis and DFT studies. Moreover, sensor ADA was successfully applied for determination of trace level of Cu2 + with 4 reuse cycles in various water samples, which affords promising potential in ion-detection field.

  4. Rational design of a novel azoimine appended maleonitrile-based Salen chemosensor for rapid naked-eye detection of copper(II) ion in aqueous media.

    Science.gov (United States)

    Rezaeian, Khatereh; Khanmohammadi, Hamid; Arab, Vajihe

    2015-12-05

    Achieving specific selectivity and high sensitivity for the colorimetric recognition of copper(II) ions in aqueous media over a complex background of potentially competing metal ions is inherently challenging in sensor development. Thus, a novel azo-azomethine receptor (L) based on the combination of 2-amino-3-(5-bromo-2-hydroxybenzylamino)maleonitrile and azo-coupled salicylaldehyde scaffold has been designed and synthesized for the naked-eye and rapid detection of Cu(2+) ion at trace level in a wide pH range. Accordingly, the devised chemosensor distinguished Cu(2+) from other metal ions by distinct color change from light yellow to light brown without any expensive equipment. The binding stoichiometry between Cu(2+) and L has been investigated using Job's plot and MALDI-TOF mass analysis. Remarkably, the current sensor can detect Cu(2+) ions even at 1.07 μM level, which is lower than the World Health Organization (WHO) permissible level (30 μM) in drinking water. Furthermore, sensor L was successfully utilized in the preparation of test strips for the detection of copper(II) ions from aqueous environment. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Sustainable Utilization of Bio waste towards the Green Synthesis of Nanoparticles and its Utility in the Naked Eye Detection of Metals Coupled with its Larvicidal and Antimicrobial Properties

    Science.gov (United States)

    Nikhila, P. S.; Satheesh, Namitha; Sreejitha, V. S.; Pillai, Anandu R.; Saritha, A.; Smitha Chandran, S.

    2018-02-01

    Green synthesis of nanoparticles has become a prominent zone of attention in the field of nanotechnology, as it is a nontoxic, economically feasible and green approach. In the present work we have developed an eco-friendly and zero cost method for the synthesis of silver nanoparticles using common a bio waste banana blossom peel. The well-known characteristic phenomenon of surface Plasmon resonance (SPR) has been exploited towards the characterization of the green synthesized nanoparticles. The aforementioned nanoparticles were characterized by UV spectroscopy and the behaviour of these particles towards naked eye detection of metal ions were observed. The sensitivity of the nanoparticles towards the detection of metal ions was carefully monitored by the shift in the SPR band. Moreover the larvicidal potential of these green synthesized silver nanoparticles were evaluated as per WHO standards. The synthesized silver nanoparticles were found to be an effective antibacterial agent against Gram negative bacteria-E.coli. The method we followed for the synthesis of silver nanoparticles is economically feasible as well as environment friendly and also capable of rapid synthesis of nanoparticles at ambient conditions.

  6. Extreme Lightning Flash Rates as an Early Indicator of Severe Storms

    Science.gov (United States)

    Goodman, Steven J.; Arnold, James E. (Technical Monitor)

    2002-01-01

    Extreme lightning flash rates are proving to be an early indicator of intensifying storms capable of producing tornadoes, damaging winds and hail. Most of this lightning is in the cloud, where the naked eye can not see it. Recent global observations of thunderstorms from space indicate that giant electrical storms (supercells and convective complexes) with flash rates on the order of 1 flash per second are most common over the land masses of the America sub-tropics and equatorial Congo Basin. Within the United States, the average tornado warning lead time on a national basis is about 11 min. The real-time observation of extreme flash rates and the rapid increase in the in-cloud flash rate, signalling the intensification of the storm updraft, may provide as much as a 50% increase in severe storm warning lead time.

  7. A naked-eye comparison of image quality between a portable versus a fixed camera system for digital flexible ureterorenoscopy - A single centre experience.

    Science.gov (United States)

    El Howairis, Mohamed; Buchholz, Noor

    2017-09-01

    To assess the image quality using the portable OTV-SI (Olympus, Southend, UK) light source system compared to a dedicated fixed standard stack system for flexible ureterorenoscopy (URS) as judged by the human eye. We compared two differing flexible URS set-ups. The first was our normal completely digital fixed set-up, comprising a flexible ureteroscope and matching digital stack system (CLV-S40 PRO-6E, Olympus). The second set-up comprised the same digital ureteroscope but with a conventional non-digital stack system and the OTV-SI portable light source. Seven experienced urologists were asked to subjectively assess the quality of the video sequences with the naked eye. The image qualities assessed were as follows: colour, distortion, graininess, depth perception, contrast, and glare. Finally, they were asked to guess whether they were observing images from the normal fixed set-up or the portable set-up. Fisher's exact test was used to compare the two sets of nominal variables. There were no significant differences in the observation ratings between the fixed and portable systems, independent of observer or image settings. Also, the surgeons were not able to correctly guess which stack system had been used. For flexible URS imaging, the combination of a digital ureteroscope with a conventional non-digital stack system together with the OTV-SI portable light source was subjectively found not to be inferior to the completely digital fixed set-up. Thus, the cheaper and smaller portable system could be considered as an economical option without substantial loss of image quality, especially useful in developing countries.

  8. A light writable microfluidic "flash memory": optically addressed actuator array with latched operation for microfluidic applications.

    Science.gov (United States)

    Hua, Zhishan; Pal, Rohit; Srivannavit, Onnop; Burns, Mark A; Gulari, Erdogan

    2008-03-01

    This paper presents a novel optically addressed microactuator array (microfluidic "flash memory") with latched operation. Analogous to the address-data bus mediated memory address protocol in electronics, the microactuator array consists of individual phase-change based actuators addressed by localized heating through focused light patterns (address bus), which can be provided by a modified projector or high power laser pointer. A common pressure manifold (data bus) for the entire array is used to generate large deflections of the phase change actuators in the molten phase. The use of phase change material as the working media enables latched operation of the actuator array. After the initial light "writing" during which the phase is temporarily changed to molten, the actuated status is self-maintained by the solid phase of the actuator without power and pressure inputs. The microfluidic flash memory can be re-configured by a new light illumination pattern and common pressure signal. The proposed approach can achieve actuation of arbitrary units in a large-scale array without the need for complex external equipment such as solenoid valves and electrical modules, which leads to significantly simplified system implementation and compact system size. The proposed work therefore provides a flexible, energy-efficient, and low cost multiplexing solution for microfluidic applications based on physical displacements. As an example, the use of the latched microactuator array as "normally closed" or "normally open" microvalves is demonstrated. The phase-change wax is fully encapsulated and thus immune from contamination issues in fluidic environments.

  9. Experimental response of an optical sensor used to determine the moment of blast by sensing the flash of the explosion

    CSIR Research Space (South Africa)

    Roux, A

    2009-09-01

    Full Text Available of an optical sensor constructed to measure the light flash of an underwater blast to determine the moment of explosion. By measurement of the time taken between this moment and the time when the shock wave reaches the pressure sensors, accurate measurements...

  10. Significant and variable linear polarization during the prompt optical flash of GRB 160625B.

    Science.gov (United States)

    Troja, E; Lipunov, V M; Mundell, C G; Butler, N R; Watson, A M; Kobayashi, S; Cenko, S B; Marshall, F E; Ricci, R; Fruchter, A; Wieringa, M H; Gorbovskoy, E S; Kornilov, V; Kutyrev, A; Lee, W H; Toy, V; Tyurina, N V; Budnev, N M; Buckley, D A H; González, J; Gress, O; Horesh, A; Panasyuk, M I; Prochaska, J X; Ramirez-Ruiz, E; Lopez, R Rebolo; Richer, M G; Román-Zúñiga, C; Serra-Ricart, M; Yurkov, V; Gehrels, N

    2017-07-26

    Newly formed black holes of stellar mass launch collimated outflows (jets) of ionized matter that approach the speed of light. These outflows power prompt, brief and intense flashes of γ-rays known as γ-ray bursts (GRBs), followed by longer-lived afterglow radiation that is detected across the electromagnetic spectrum. Measuring the polarization of the observed GRB radiation provides a direct probe of the magnetic fields in the collimated jets. Rapid-response polarimetric observations of newly discovered bursts have probed the initial afterglow phase, and show that, minutes after the prompt emission has ended, the degree of linear polarization can be as high as 30 per cent-consistent with the idea that a stable, globally ordered magnetic field permeates the jet at large distances from the central source. By contrast, optical and γ-ray observations during the prompt phase have led to discordant and often controversial results, and no definitive conclusions have been reached regarding the origin of the prompt radiation or the configuration of the magnetic field. Here we report the detection of substantial (8.3 ± 0.8 per cent from our most conservative simulation), variable linear polarization of a prompt optical flash that accompanied the extremely energetic and long-lived prompt γ-ray emission from GRB 160625B. Our measurements probe the structure of the magnetic field at an early stage of the jet, closer to its central black hole, and show that the prompt phase is produced via fast-cooling synchrotron radiation in a large-scale magnetic field that is advected from the black hole and distorted by dissipation processes within the jet.

  11. A robust fibre laser system for electro-optic electron bunch profile measurements at FLASH

    International Nuclear Information System (INIS)

    Wissmann, Laurens-Georg

    2012-08-01

    For the electro-optic measurement of electron bunch profiles at FLASH a robust ytterbium doped fibre laser (YDFL) system has been developed consisting of a laser oscillator and a two-staged amplifier. The oscillator is designed to meet the specifications of high reliability and low noise operation. The amplifier makes use of tailored nonlinearity to enhance the spectral bandwidth of the output laser pulses. Active repetition rate control enables sub-picosecond synchronisation of the laser to the accelerator reference RF. Using a two-stage gating scheme the output pulse train repetition rate is adopted to the accelerator repetition rate. An experimental site used for electro-optic electron bunch diagnostics has been redesigned to support single-shot bunch profile measurements based on spectral decoding. An existing bunch profile monitor with a similar laser system was upgraded and electro-optic bunch profile measurements were conducted, allowing for a comparison with measurements done with other longitudinal electron bunch diagnostics and with former measurements.

  12. A robust fibre laser system for electro-optic electron bunch profile measurements at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Wissmann, Laurens-Georg

    2012-08-15

    For the electro-optic measurement of electron bunch profiles at FLASH a robust ytterbium doped fibre laser (YDFL) system has been developed consisting of a laser oscillator and a two-staged amplifier. The oscillator is designed to meet the specifications of high reliability and low noise operation. The amplifier makes use of tailored nonlinearity to enhance the spectral bandwidth of the output laser pulses. Active repetition rate control enables sub-picosecond synchronisation of the laser to the accelerator reference RF. Using a two-stage gating scheme the output pulse train repetition rate is adopted to the accelerator repetition rate. An experimental site used for electro-optic electron bunch diagnostics has been redesigned to support single-shot bunch profile measurements based on spectral decoding. An existing bunch profile monitor with a similar laser system was upgraded and electro-optic bunch profile measurements were conducted, allowing for a comparison with measurements done with other longitudinal electron bunch diagnostics and with former measurements.

  13. An electro-optical timing diagnostic for pump-probe experiments at the free-electron laser in Hamburg FLASH

    International Nuclear Information System (INIS)

    Azima, Armin

    2009-07-01

    Femtosecond pump-probe experiments have extensively been used to follow atomic and molecular motion in time. The very intense extreme ultraviolet XUV light of the Free electron LASer in Hamburg FLASH facility allows to investigate fundamental processes such as direct one or few photon inner shell ionizations. A supplementary Ti:Sapphire near infrared femtosecond laser system allows to perform two-color pump-probe experiments with FLASH involving intense laser fields of hugely different photon energies. Within this work a bunch arrival measurement system has been built, which assists these two-color pump-probe experiments to reduce the temporal jitter of FLASH and to increase the temporal resolution. The diagnostic is based upon an electro-optical detection scheme and measures the relative arrival time between the Ti:Sapphire femtosecond pulse and the electron bunch, which generates the self-amplified by stimulated emission SASE XUV pulse in the undulator section of FLASH. Key feature of the diagnostic is a 150 m long glass fiber pulse transport line, which inflicts non-linear dispersion. A dispersion control system to compensate for this higher order dispersion has been developed including the control and programming of a spatial light phase modulator. It was possible to transport a 90 fs FWHM short near infrared femtosecond laser pulse Fourier limited by the dispersion compensated glass fiber. The electro-optical signal induced by the FLASH electron bunch was generated, characterized and optimized. The signal features beside the designated bunch arrival timing capability the additional possibility to measure the longitudinal electron bunch density distribution of an arbitrary bunch of FLASH in a single shot with a temporal resolution of below 100 fs RMS. Timing and bunch analysis capabilities of the developed diagnostic have been cross-checked with other comparable diagnostics at FLASH like the transversal deflecting cavity structure named LOLA. Finally, the

  14. An electro-optical timing diagnostic for pump-probe experiments at the free-electron laser in Hamburg FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Azima, Armin

    2009-07-15

    Femtosecond pump-probe experiments have extensively been used to follow atomic and molecular motion in time. The very intense extreme ultraviolet XUV light of the Free electron LASer in Hamburg FLASH facility allows to investigate fundamental processes such as direct one or few photon inner shell ionizations. A supplementary Ti:Sapphire near infrared femtosecond laser system allows to perform two-color pump-probe experiments with FLASH involving intense laser fields of hugely different photon energies. Within this work a bunch arrival measurement system has been built, which assists these two-color pump-probe experiments to reduce the temporal jitter of FLASH and to increase the temporal resolution. The diagnostic is based upon an electro-optical detection scheme and measures the relative arrival time between the Ti:Sapphire femtosecond pulse and the electron bunch, which generates the self-amplified by stimulated emission SASE XUV pulse in the undulator section of FLASH. Key feature of the diagnostic is a 150 m long glass fiber pulse transport line, which inflicts non-linear dispersion. A dispersion control system to compensate for this higher order dispersion has been developed including the control and programming of a spatial light phase modulator. It was possible to transport a 90 fs FWHM short near infrared femtosecond laser pulse Fourier limited by the dispersion compensated glass fiber. The electro-optical signal induced by the FLASH electron bunch was generated, characterized and optimized. The signal features beside the designated bunch arrival timing capability the additional possibility to measure the longitudinal electron bunch density distribution of an arbitrary bunch of FLASH in a single shot with a temporal resolution of below 100 fs RMS. Timing and bunch analysis capabilities of the developed diagnostic have been cross-checked with other comparable diagnostics at FLASH like the transversal deflecting cavity structure named LOLA. Finally, the

  15. Optical, Infrared, and Ultraviolet Observations of the X-Ray Flash XRF 050416A

    Science.gov (United States)

    Holland, S. T.; Boyd, P. T.; Gorosabel, J.; Hjorth, J.; Schady, P.; Thomsen, B.; Augusteijn, T.; Blustin, A. J.; Breeveld, A.; De Pasquale, M.; Fynbo, J. P. U.; Gehrels, N.; Gronwall, C.; Hunsberger, S.; Ivanushkina, M.; Landsman, W.; Laursen, P.; McGowan, K.; Mangano, V.; Markwardt, C. B.; Marshall, F.; Mason, K. O.; Moretti, A.; Page, M. J.; Poole, T.; Roming, P.; Rosen, S.; Still, M.

    2007-01-01

    We present ultraviolet, optical, and infrared photometry of the afterglow of the X-ray flash XRF 050416A taken between approximately 100 s and 36 days after the burst. We find an intrinsic spectral slope between 1930 and 22200 Å of β=-1.14+/-0.20 and a decay rate of α=-0.86+/-0.15. There is no evidence for a change in the decay rate between approximately 0.7 and 4.7 days after the burst. Our data imply that there is no spectral break between the optical and X-ray bands between 0.7 and 4.7 days after the burst and are consistent with the cooling break being redward of the Ks band (22200 Å) at 0.7 days. The combined ultraviolet/optical/infrared spectral energy distribution shows no evidence for a significant amount of extinction in the host galaxy along the line of sight to XRF 050416A. Our data suggest that the extragalactic extinction along the line of sight to the burst is only approximately AV=0.2 mag, which is significantly less than the extinction expected from the hydrogen column density inferred from X-ray observations of XRF 050416A assuming a dust-to-gas ratio similar to what is found for the Milky Way. The observed extinction, however, is consistent with the dust-to-gas ratio seen in the Small Magellanic Cloud. We suggest that XRF 050416A may have a two-component jet similar to what has been proposed for GRB 030329. If this is the case, the lack of an observed jet break between 0.7 and 42 days is an illusion due to emission from the wide jet dominating the afterglow after approximately 1.5 days.

  16. Optical progression characteristics of an interesting natural downward bipolar lightning flash

    Science.gov (United States)

    Chen, Luwen; Lu, Weitao; Zhang, Yijun; Wang, Daohong

    2015-01-01

    high-speed cameras, Lightning Attachment Process Observation Systems, and fast and slow electrical antennas, we documented a downward bipolar lightning flash that contained one first positive stroke with a peak current of 142 kA and five subsequent negative strokes hitting on a 90 m tall structure on 29 July 2010 in Guangzhou City, China. All the six strokes propagated along the same viewed channel established by the first positive return stroke. The leader which preceded the positive return stroke propagated downward without any branches at a two-dimensional (2-D) speed of 2.5 × 106 m/s. An upward connecting leader with a length of about 80 m was observed in response to the downward positive leader. The 10-90% risetimes of the return strokes' optical pulses ranged from 2.2 µs to 3.2 µs, while the widths from the 10% wavefront to the 50% wave tail ranged from 56.5 µs to 83.1 µs, and the half peak widths ranged from 53.4 µs to 81.6 µs. All the return strokes exhibited similar speeds, ranging from 1.0 × 108 m/s to 1.3 × 108 m/s. Each of the return strokes was followed by a continuing current stage (CC). The first positive stroke CC lasted more than 150 ms, much larger than all the subsequent negative stroke CC, ranging from 13 ms to 70 ms.

  17. Highly sensitive optical chemosensor for the detection of Cu using a ...

    Indian Academy of Sciences (India)

    Administrator

    can be available for the simple 'naked eye' sensing of copper ion in aqueous media. From the viewpoint of sensitivity, an alternative way to convert absorb- ance signal into fluorescence signal can be exploited by fluorescence inner filter effect (IFE), which is useful for an optical chemical sensor with enhanced sensitivity in ...

  18. Optical clearing of skin using flash lamp-induced enhancement of epidermal permeability.

    Science.gov (United States)

    Tuchin, V V; Altshuler, G B; Gavrilova, A A; Pravdin, A B; Tabatadze, D; Childs, J; Yaroslavsky, I V

    2006-10-01

    Strong light scattering in skin prevents precise targeting of optical energy in therapeutic and diagnostic applications. Optical immersion based on matching refractive index of scattering centers with that of surrounding matter through introduction of an exogenous index-matching agent can alleviate the problem. However, slow diffusion of the index-matching agent through skin barrier makes practical implementation of this approach difficult. We propose a method of accelerating penetration of the index-matching compounds by enhancing skin permeability through creating a lattice of micro-zones (islets) of limited thermal damage in the stratum corneum (SC). A flash lamp (intense pulsed light) system and an island mask with a pattern of absorbing centers (center size approximately 75-120 microm, lattice pitch approximately 450-500 microm) were used to create the lattice of islets of damage (LID). Index-matching agents, such as glucose solution, propylene glycol solution, and glycerol solution, were applied. Experimental results of optical clearing ex vivo rat and pig skin, and ex vivo and in vivo human skin are presented. Optical transmission spectra of the skin samples with LID were measured during some 2 hours after application of index-matching chemical agents. In order to assess and compare the clearing rate under different treatment and clearing agents we calculated the quantity that we call "relative transmittance": T(rel) = I(t)(lambda)/I(0)(lambda), were I(t)(lambda) is the intensity measured at elapsed time t. The dynamics of relative transmittance of skin samples at 470 and 650 nm shows that the implementation of limited thermal damage technique leads to a 3-10-fold increase of optical clearing (rise of transmittance) rate compared to the results obtained when the samples were treated with high-intensity light pulses but without the use of island damage mask (IDM). It was observed from the plotted spectra of relative transmittance that the maximum increase of

  19. Hot Flashes

    Science.gov (United States)

    Hot flashes Overview Hot flashes are sudden feelings of warmth, which are usually most intense over the face, neck and chest. Your skin might redden, as if you're blushing. Hot flashes can also cause sweating, and if you ...

  20. Flash protection controller

    Science.gov (United States)

    Galbraith, Lee K.

    1981-01-01

    A controller provides a high voltage to maintain an electro-optic shutter in a transparent condition until a flash of light which would be harmful to personnel is sensed by a phototransistor. The controller then shorts the shutter to ground to minimize light transmission to the user and maintains light transmission at the pre-flash level for a predetermined time to allow the flash to subside. A log converter and differential trigger circuit keep the controller from being triggered by other light flashes which are not dangerous.

  1. A novel photobioreactor structure using optical fibers as inner light source to fulfill flashing light effects of microalgae.

    Science.gov (United States)

    Xue, Shengzhang; Zhang, Qinghua; Wu, Xia; Yan, Chenghu; Cong, Wei

    2013-06-01

    In this work, a novel photobioreactor structure using optical fibers being fixed vertically to culture flow direction as inner light source was proposed to fulfill flashing light effects (FLE) of microalgae, so as to obtain high light efficiency. Three types of optical-fiber photobioreactor fulfilling FLE of microalgae, i.e. air-driven panel, pump-driven panel and stirred tank type, were proposed and a 130 L airlift panel one was practically constructed on which both cold (light profile, liquid velocity) and hot model tests were carried out. Results demonstrated that it could produce uniformed light/dark frequencies being over 10 Hz and microalgae productivity increased by 43% and 38% for Spirulina platensis and Scenedesmus dimorphus respectively, compared with the control. This suggested the structure to be a viable and promising option for future photobioreactors. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Energy and Emission Characteristics of a Short-Arc Xenon Flash Lamp Under "Saturated" Optical Brightness Conditions

    Science.gov (United States)

    Kamrukov, A. S.; Kireev, S. G.; Kozlov, N. P.; Shashkovskii, S. G.

    2017-09-01

    We present the results of a study of the electrical, energy, and spectral brightness characteristics of an experimental three-electrode high-pressure xenon flash lamp under conditions ensuring close to maximum possible spectral brightness for the xenon emission. We show that under saturated optical brightness conditions (brightness temperature in the visible region of the spectrum 30,000 K), emission of a pulsed discharge in xenon is quite different from the emission from an ideal blackbody: the maximum brightness temperatures are 24,000 K in the short-wavelength UV region and 19,000 K in the near IR range. The relative fraction of UV radiation in the emission spectrum of the lamp is >50%, which lets us consider such lamps as promising broadband sources of radiation with high spectral brightness for many important practical applications.

  3. Sputter-Coated Microparticle Additives for Tailored Optical Properties

    Science.gov (United States)

    2016-09-01

    Images of the coated spheres can be seen in Fig. 7. To the naked eye , the spheres appear a uniform color . However, as seen in Fig. 7, a microscopic...provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently...software was used to predict what material combinations and thicknesses would produce the optical reflectance spectra for a given color . In this study

  4. Flash grundkursus

    DEFF Research Database (Denmark)

    Jensen, Henrik

    2008-01-01

    Flash er et programmeringssprog  og kan som sådant ikke noget i sig selv. Kursets mål er, at give den studerende et grundlæggende kendskab til Flash, så det kan bruges til præsentationer på skærm og til produktion af hjemmesider. På kurset arbejdes der med billede, grafik, lyd, video og interakti...

  5. Flash radiography

    International Nuclear Information System (INIS)

    Jamet, F.

    1986-01-01

    Flash radiography is a method for recording radiographic pictures of a non-transparent high-speed phenomenon. Such events occur in a variety of fields: Ballistics, dynamic high pressure physics, detonics, industry, and medical diagnostics. The phenomena observed by flash-radiography generally move at velocities between 100 m/s and 10000 m/s. The motion blur recorded on the picture is negligible only if the duration of the X-ray pulse (or the exposure time) falls in the range 10 -8 - 10 -7 s. With a medical or industrial radiographic device, the correct blackening of a film is obtained with a current of some milliamperes and a mean exposure time of 0.1 s. From this it is deduced that the value of the current passing through a flash X-ray tube must be approximately equal to 10 4 A. These values cannot be attained in conventional X-ray tubes with a heated cathode. The production of large currents is mainly achieved by vacuum discharges and field emission. Two applications of the technique are presented: flash radiographs of shock waves, and flash X-ray diffraction. (Auth.)

  6. A visual understanding of optical rotation using corn syrup

    Science.gov (United States)

    Nixon, M.; Hughes, I. G.

    2017-07-01

    In this paper a visual demonstration of optical rotation is presented, with content appropriate for use in a lecture demonstration as well as quantitative techniques suitable for an undergraduate-laboratory experiment. Linearly polarised lasers of various wavelengths are propagated through a glass tube containing corn syrup. The rotation of the plane of polarisation of the light is visible with the naked eye, making the experiment dramatic and engaging and aiding understanding of the phenomenon of optical rotation. In addition, we present a simple approach to quantitatively analyse data using only equipment commonly found in undergraduate teaching laboratories.

  7. DIRCM FLASH Flight Tests

    National Research Council Canada - National Science Library

    Molocher, Bernhard; Kaltenecker, Anton; Thum-Jaeger, Andrea; Regensburger, Martin; Formery, Martin

    2005-01-01

    .... FLASH operation is as follows: After handover following an alarm from the missile warning system FLASH enters autonomous passive tracking mode for tracking a missiles and sending a laser beam onto the missile...

  8. Simple flash evaporator for making thin films of compounds

    Energy Technology Data Exchange (ETDEWEB)

    Hemanadhan, M.; Bapanayya, Ch.; Agarwal, S. C. [Department of Physics, Indian Institute of Technology, Kanpur 208016 (India)

    2010-07-15

    A simple and compact arrangement for flash evaporation is described. It uses a cell phone vibrator for powder dispensing that can be incorporated into a vacuum deposition chamber without any major alterations. The performance of the flash evaporation system is checked by making thin films of the optical memory chalcogenide glass Ge{sub 2}Sb{sub 2}Te{sub 5} (GST). Energy dispersive x-ray analysis shows that the flash evaporation preserves the stoichiometry in thin films.

  9. NAND flash memory technologies

    CERN Document Server

    Aritome, Seiichi

    2016-01-01

    This book discusses basic and advanced NAND flash memory technologies, including the principle of NAND flash, memory cell technologies, multi-bits cell technologies, scaling challenges of memory cell, reliability, and 3-dimensional cell as the future technology. Chapter 1 describes the background and early history of NAND flash. The basic device structures and operations are described in Chapter 2. Next, the author discusses the memory cell technologies focused on scaling in Chapter 3, and introduces the advanced operations for multi-level cells in Chapter 4. The physical limitations for scaling are examined in Chapter 5, and Chapter 6 describes the reliability of NAND flash memory. Chapter 7 examines 3-dimensional (3D) NAND flash memory cells and discusses the pros and cons in structure, process, operations, scalability, and performance. In Chapter 8, challenges of 3D NAND flash memory are dis ussed. Finally, in Chapter 9, the author summarizes and describes the prospect of technologies and market for the fu...

  10. Pro Android Flash

    CERN Document Server

    Chin, Stephen; Campesato, Oswald

    2011-01-01

    Did you know you can take your Flash skills beyond the browser, allowing you to make apps for Android, iOS and the BlackBerry Tablet OS? Build dynamic apps today starting with the easy-to-use Android smartphones and tablets. Then, take your app to other platforms without writing native code. Pro Android Flash is the definitive guide to building Flash and other rich Internet applications (RIAs) on the Android platform. It covers the most popular RIA frameworks for Android developers - Flash and Flex - and shows how to build rich, immersive user experiences on both Android smartphones and tablet

  11. Flash-Type Discrimination

    Science.gov (United States)

    Koshak, William J.

    2010-01-01

    This viewgraph presentation describes the significant progress made in the flash-type discrimination algorithm development. The contents include: 1) Highlights of Progress for GLM-R3 Flash-Type discrimination Algorithm Development; 2) Maximum Group Area (MGA) Data; 3) Retrieval Errors from Simulations; and 4) Preliminary Global-scale Retrieval.

  12. The flash grab effect.

    Science.gov (United States)

    Cavanagh, Patrick; Anstis, Stuart

    2013-10-18

    When an object moves back and forth, its trajectory appears significantly shorter than it actually is. The object appears to stop and reverse well before its actual reversal point, as if there is some averaging of location within a window of about 100 ms (Sinico et al., 2009). Surprisingly, if a bar is flashed at the physical end point of the trajectory, right on top of the object, just as it reverses direction, the flash is also shifted - grabbed by the object - and is seen at the perceived endpoint of the trajectory rather than the physical endpoint. This can shift the perceived location of the flash by as much as 2 or 3 times its physical size and by up to several degrees of visual angle. We first show that the position shift of the flash is generated by the trajectory shortening, as the same shift is seen with or without the flash. The flash itself is only grabbed if it is presented within a small spatiotemporal attraction zone around the physical end point of the trajectory. Any flash falling in that zone is pulled toward the perceived endpoint. The effect scales linearly with speed, up to a maximum, and is independent of the contrast of the moving stimulus once it is above 5%. Finally, we demonstrate that this position shift requires attention. These results reveal a new "flash grab" effect in the family of motion-induced position shifts. Although it most resembles the flash drag effect, it differs from this in the following ways: (1) it has a different temporal profile, (2) it requires attention, (3) it is about 10 times larger. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. Floods and Flash Flooding

    Science.gov (United States)

    Floods and flash flooding Now is the time to determine your area’s flood risk. If you are not sure whether you ... If you are in a floodplain, consider buying flood insurance. Do not drive around barricades. If your ...

  14. Coding for flash memories

    OpenAIRE

    Yaakobi, Eitan

    2011-01-01

    Flash memories are, by far, the most important type of non -volatile memory in use today. They are employed widely in mobile, embedded, and mass-storage applications, and the growth in this sector continues at a staggering pace. Moreover, since flash memories do not suffer from the mechanical limitations of magnetic disk drives, solid- state drives have the potential to upstage the magnetic recording industry in the foreseeable future. The research goal of this dissertation is the discovery o...

  15. Comparison of two methods of visual magnification for removal of adhesive flash during bracket placement using two types of orthodontic bonding agents

    Science.gov (United States)

    Alencar, Estefania Queiroga de Santana e; Nobrega, Maria de Lourdes Martins; Dametto, Fabio Roberto; dos Santos, Patrícia Bittencourt Dutra; Pinheiro, Fabio Henrique de Sá Leitão

    2016-01-01

    ABSTRACT Objective: This study aimed to evaluate the effectiveness of two methods of visual magnification (operating microscope and light head magnifying glass) for removal of composite flash around orthodontic metal brackets. Material and Methods: Brackets were bonded in the center of the clinical crown of sixty well-preserved human premolars. Half of the sample was bonded with conventional Transbond XT (3M Unitek TM, USA), whereas the other half was bonded with Transbond TM Plus Color Change (3M Unitek TM, USA). For each type of composite, the choice of method to remove the flash was determined by randomly distributing the teeth into the following subgroups: A (removal by naked eye, n = 10), B (removal with the aid of light head magnifying glass, under 4x magnification, n = 10), and C (removal with the aid of an operating microscope, under 40x magnification, n = 10). Brackets were debonded and teeth taken to a scanning electron microscope (SS-x-550, Shimadzu, Japan) for visualization of their buccal surface. Quantification of composite flash was performed with Image Pro Plus software, and values were compared by Kruskal-Wallis test and Dunn’s post-hoc test at 5% significance level. Results: Removal of pigmented orthodontic adhesive with the aid of light head magnifying glass proved, in general, to be advantageous in comparison to all other methods. Conclusion: There was no advantage in using Transbond TM Plus Color Change alone. Further studies are necessary to draw a more definitive conclusion in regards to the benefits of using an operating microscope. PMID:28125139

  16. Professional Flash Lite Mobile Development

    CERN Document Server

    Anderson, J G

    2010-01-01

    Discover how to create Flash Lite mobile apps from the ground up. Adobe Flash is an ideal choice for developing rich interactive content for "Flash-enabled" mobile devices; and with this book, you'll learn how to create unique applications with Flash Lite. Through a series of code samples and extensive example applications, you'll explore the core concepts, key features, and best practices of the Flash Lite player. Coverage reveals various ways to develop Flash mobile content, create applications with a cross-platform programming framework based on the Model, View and Controller conc

  17. Foundation Flash Cartoon Animation

    CERN Document Server

    Jones, Tim; Rosson, Allan S

    2008-01-01

    One of Flash s most common uses is still animation for cartoons, games, advertising etc, and this book takes a fresh look at the topic, breaking it down pre-production, production, and post production, and looking at each section in detail, and covering topics such as storyboarding, character libraries and camera mechanics like no Flash book has before. The book is written by members of the Emmy award winning ANIMAX team, who have created work for clients such as Disney, AOL, Fox, WWE, ESPN, and Sesame workshop. This book is an opportunity for them to share their secrets, and is written to sui

  18. Flash x-ray

    International Nuclear Information System (INIS)

    Johnson, Q.; Pellinen, D.

    1976-01-01

    The complementary techniques of flash x-ray radiography (FXR) and flash x-ray diffraction (FXD) provide access to a unique domain in nondestructive materials testing. FXR is useful in studies of macroscopic properties during extremely short time intervals, and FXD, the newer technique, is used in studies of microscopic properties. Although these techniques are similar in many respects, there are some substantial differences. FXD generally requires low-voltage, line-radiation sources and extremely accurate timing; FXR is usually less demanding. Phenomena which can be profitably studied by FXR often can also be studied by FXD to permit a complete materials characterization

  19. Gamma ray flashes add to mystery of upper atmosphere

    Science.gov (United States)

    Atmospheric electricity research has come a long way since Benjamin Franklin's kite-flying days. But what researchers have been learning lately about above-thunderstorm electricity has wrought a whole new era of mysteries.For a start, last summer a Colorado meteorologist sparked interest in a terrestrial phenomenon that the community first observed more than 100 years ago: optical flashes that occur above thunderstorms—at least 30 km above Earth. Walter Lyons with the Ft. Collins-based Mission Research Corporation, demonstrated that such flashes are not anomalies, as conventional scientific wisdom had held. He filmed hundreds of flashes during a 2-week period.

  20. Learning Flash CS4 Professional

    CERN Document Server

    Shupe, Rich

    2009-01-01

    Learning Flash CS4 Professional offers beginners and intermediate Flash developers a unique introduction to the latest version of Adobe's powerful multimedia application. This easy-to-read book is loaded with full-color examples and hands-on tasks to help you master Flash CS4's new motion editor, integrated 3D system, and character control using the new inverse kinematics bones animation system. No previous Flash experience is necessary.

  1. Jaan Toomik Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    1999. a. mai-juuni 'Flash Artis' on ajakirja Eesti korrespondendi Ando Keskküla artikkel Jaan Toomikust. Jaan Toomik on kutsutud esinema Londoni The Photographers' Gallery grupinäitusele, tema videot 'Father and Son' näidatakse Londonis avataval näitusel 'Near and Elsewhere' 11.-24. juunini

  2. Inessa Josing Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    'Flash Art'i' 1998. a. nov.-dets. numbris Rosa Martínezi artiklis suvisest Manifesta II näitusest Luxembourg'is on positiivselt mainitud ka Inessa Josingut. Illustratsiooniks toodud seitsmest fotost ühel on I. Josingu aknakujundus 'What Must I Do to be Saved?'

  3. Flash Builder and Flash Catalyst The New Workflow

    CERN Document Server

    Peeters, Steven

    2010-01-01

    The Flash Platform is changing. Flash Builder and Flash Catalyst have brought a new separation of design and coding to web development that enables a much more efficient and streamlined workflow. For designers and developers used to the close confines of Flash, this is a hugely liberating but at first alien concept. This book teaches you the new workflow for the Flash platform. It gives an overview of the technologies involved and provides you with real-world project examples and best-practice guidelines to get from design to implementation with the tools at hand. * Includes many examples* Foc

  4. Why Flash Type Matters: A Statistical Analysis

    Science.gov (United States)

    Mecikalski, Retha M.; Bitzer, Phillip M.; Carey, Lawrence D.

    2017-09-01

    While the majority of research only differentiates between intracloud (IC) and cloud-to-ground (CG) flashes, there exists a third flash type, known as hybrid flashes. These flashes have extensive IC components as well as return strokes to ground but are misclassified as CG flashes in current flash type analyses due to the presence of a return stroke. In an effort to show that IC, CG, and hybrid flashes should be separately classified, the two-sample Kolmogorov-Smirnov (KS) test was applied to the flash sizes, flash initiation, and flash propagation altitudes for each of the three flash types. The KS test statistically showed that IC, CG, and hybrid flashes do not have the same parent distributions and thus should be separately classified. Separate classification of hybrid flashes will lead to improved lightning-related research, because unambiguously classified hybrid flashes occur on the same order of magnitude as CG flashes for multicellular storms.

  5. A next generation Ultra-Fast Flash Observatory (UFFO-100) for IR/optical observations of the rise phase of gamma-ray bursts

    DEFF Research Database (Denmark)

    Grossan, B.; Park, I.H.; Ahmad, S.

    2012-01-01

    generation of rapid-response space observatory instruments. We list science topics motivating ourinstruments, those that require rapid optical-IR GRB response, including: A survey of GRB rise shapes/times,measurements of optical bulk Lorentz factors, investigation of magnetic dominated (vs. non-magnetic) jet...... for a next generation space observatory as a secondinstrument on a low-earth orbit spacecraft, with a 120 kg instrument mass budget. Restricted to relatively modest mass,power, and launch resources, we find that a coded mask X-ray camera with 1024 cm2 of detector area could rapidlylocate about 64...

  6. Physics Flash August 2016

    Energy Technology Data Exchange (ETDEWEB)

    Kippen, Karen Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-25

    Physics Flash is the newsletter for the Physics Division at Los Alamos National Laboratory. This newsletter is for August 2016. The following topics are covered: "Accomplishments in the Trident Laser Facility", "David Meyerhofer elected as chair-elect APS Nominating Committee", "HAWC searches for gamma rays from dark matter", "Proton Radiography Facility commissions electromagnetic magnifier", and "Cosmic ray muon computed tomography of spent nuclear fuel in dry storage casks."

  7. The lightning flash

    CERN Document Server

    Cooray, Vernon

    2014-01-01

    With contributions from today's leading lightning engineers and researchers, this updated 2nd edition of Vernon Cooray's classic text, The Lightning Flash provides the reader with an essential introduction to lightning and its impact on electrical and electronic equipment. Providing the reader with a thorough background into almost every aspect of lightning and its impact on electrical and electronic equipment, this new edition is updated throughout and features eight new chapters that bring the science up to date.

  8. Coherent imaging at FLASH

    International Nuclear Information System (INIS)

    Chapman, H N; Bajt, S; Duesterer, S; Treusch, R; Barty, A; Benner, W H; Bogan, M J; Frank, M; Hau-Riege, S P; Woods, B W; Boutet, S; Cavalleri, A; Hajdu, J; Iwan, B; Seibert, M M; Timneanu, N; Marchesini, S; Sakdinawat, A; Sokolowski-Tinten, K

    2009-01-01

    We have carried out high-resolution single-pulse coherent diffractive imaging at the FLASH free-electron laser. The intense focused FEL pulse gives a high-resolution low-noise coherent diffraction pattern of an object before that object turns into a plasma and explodes. In particular we are developing imaging of biological specimens beyond conventional radiation damage resolution limits, developing imaging of ultrafast processes, and testing methods to characterize and perform single-particle imaging.

  9. Physics Flash December 2016

    Energy Technology Data Exchange (ETDEWEB)

    Kippen, Karen Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). ADEPS Communications

    2016-12-01

    This is the December 2016 issue of Physics Flash, the newsletter of the Physics Division of Los Alamos National Laboratory (LANL). In this issue, the following topics are covered: Novel liquid helium technique to aid highly sensitive search for a neutron electrical dipole moment; Silverleaf: Prototype Red Sage experiments performed at Q-site; John L. Kline named 2016 APS Fellow; Physics students in the news; First Entropy Engine quantum random number generator hits the market; and celebrating service.

  10. Influence of substrate temperature on structural, electrical and optical properties of flash evaporated CuIn{sub 0.60}Al{sub 0.40}Se{sub 2} thin films

    Energy Technology Data Exchange (ETDEWEB)

    Udayakumar, C. [Thin Film Laboratory, Physics Division, VIT University, Vellore (India); Rajagopalan, S.; Balamurugan, A.K. [Indira Gandhi Centre for Atomic Research, Kalpakkam (India); Uthanna, S. [Department of Physics, Sri Venkateswara University, Tirupati (India); Chandra, G.H.

    2009-04-15

    CuIn{sub 0.60}Al{sub 0.40}Se{sub 2} thin films were grown by the flash evaporation method onto glass substrates held at temperatures in the range 303-623 K. The influence of substrate temperature on growth of the films was studied. The growth of the highly (111) oriented CuIn{sub 0.60}Al{sub 0.40}Se{sub 2} thin films was observed at T{sub S}=598 K exhibiting sphalerite structure. The surface morphology of CuIn{sub 0.60}Al{sub 0.40}Se{sub 2} films deposited at T{sub S}=623 K indicates segregation of Cu{sub 2-x}Se binary phase. The electrical resistivity was around 66 {omega}cm (300 nm) with p-type conductivity for the films deposited at 598 K. The temperature dependence of the electrical conductivity suggested that above 493 K the conduction mechanism was intrinsic, whereas extrinsic/impurity conduction dominated in the range 303-473 K. The single phase CuIn{sub 0.60}Al{sub 0.40}Se{sub 2} films showed an optical bandgap of 1.37 eV. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  11. Optical nanosensor design with uniform pore geometry and large particle morphology.

    Science.gov (United States)

    El-Safty, Sherif A; Ismail, Adel A; Matsunaga, Hideyuki; Mizukami, Fujio

    2007-01-01

    Appropriate design of nanosensors for optically selective, sensitive sensing systems is needed for naked-eye detection of pollutants for environmental cleanup of toxic heavy-metal ions. Mesostructured materials with two- or three-dimensional (2D or 3D) geometries and large particle morphologies show promise as probe carriers, and can therefore be used to reproducibly fabricate uniformly packed nanosensors. This is the first report on the effects of significant key properties of the mesostructured carriers, such as morphology, geometry, and pore shape, on the functionality of optical nanosensor designs. Such mesostructured sensors with superior physical characteristics can be used as components in sensing systems with excellent stability and sensitivity, and with rapid detection response. The nanosensor design can enhance the selectivity even at low concentrations of the pollutant target ions (nanomolar level). Among the nanosensors developed here, the large pore-surface grains of highly ordered 3D monoliths (HOM) exhibited a high adsorption capability of the Pyrogallol Red probe and high accessibility to analyte ion transport, leading to possible naked-eye detection of Sb(III) ions at concentrations as low as 10(-9) mol dm(-3) and at a wide detection range of 0.5 ppb to 3 ppm. A key finding in our study was that our mesostructured nanosensor designs retained highly efficient sensitivity without a significant increase in kinetic hindrance, despite the slight decrease of the specific activity of the electron acceptor/donor strength of the probe functional group after several regeneration/reuse cycles. The results, in general, indicate that large-scale reversibility of optical nanosensors is feasible in such metal-ion sensing systems.

  12. Flash Platform Examination

    Science.gov (United States)

    2011-03-01

    Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2011 DRDC Atlantic TM 2008-291 i Abstract...concepts de l’interface utilisateur novateurs. Les applications Flash de diverses fidélités peut intégrer des fonctions de visualisation des données...diverses peuvent intégrer des fonctions de visualisation des données, d’interactivité novatrice, d’animation riche et de diverses

  13. Intra-molecular mobility of charge carriers along oligogermane backbones studied by flash photolysis time-resolved microwave conductivity and transient optical spectroscopy techniques

    Energy Technology Data Exchange (ETDEWEB)

    Seki, Shu [Division of Applied Chemistry, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871 (Japan)], E-mail: seki@chem.eng.osaka-u.ac.jp; Saeki, Akinori; Acharya, Anjali; Koizumi, Yoshiko; Tagawa, Seiichi [The Institute of Scientific and Industrial Research, Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); Mochida, Kunio [Department of Chemistry Faculty of Science, Gakusyuin University, 1-5-1 Mejiro, Tokyo 171-8588 (Japan)

    2008-10-15

    Time-resolved microwave conductivity (TRMC) measurement has been performed for fullerene-doped thin films of oligo (dimethylgermane) at different excitation energies to evaluate the intra-molecular mobility of holes along their Ge backbones. Photo-induced electron transfer reaction between oligogermane and fullerene has been observed in the solution with a variety of solvent polarity using transient optical spectroscopy (TOS). The transient spectrum at 391 nm can be attributed to the radical cation of the oligomer under an excitation at 532-nm light, whereas the same spectrum (391 nm) is the overlapping of absorptions of radical cations and neutral radicals of oligogermanes upon exposure of 355-nm light in polar solvent. A combined TRMC and TOS experiments on the solutions of oligomer confirms the conductive transients originate from the radical cations on the backbone chains.

  14. Flash X-ray

    International Nuclear Information System (INIS)

    Sato, Eiichi

    2003-01-01

    Generation of quasi-monochromatic X-ray by production of weakly ionized line plasma (flash X-ray), high-speed imaging by the X-ray and high-contrast imaging by the characteristic X-ray absorption are described. The equipment for the X-ray is consisted from the high-voltage power supply and condenser, turbo molecular pump, and plasma X-ray tube. The tube has a long linear anticathode to produce the line plasma and flash X-ray at 20 kA current at maximum. X-ray spectrum is measured by the imaging plate equipped in the computed radiography system after diffracted by a LiF single crystal bender. Cu anticathode generates sharp peaks of K X-ray series. The tissue images are presented for vertebra, rabbit ear and heart, and dog heart by X-ray fluoroscopy with Ce anticathode. Generation of K-orbit characteristic X-ray with extremely low bremsstrahung is to be attempted for medical use. (N.I.)

  15. 3D flash lidar imager onboard UAV

    Science.gov (United States)

    Zhou, Guoqing; Liu, Yilong; Yang, Jiazhi; Zhang, Rongting; Su, Chengjie; Shi, Yujun; Zhou, Xiang

    2014-11-01

    A new generation of flash LiDAR sensor called GLidar-I is presented in this paper. The GLidar-I has been being developed by Guilin University of Technology in cooperating with the Guilin Institute of Optical Communications. The GLidar-I consists of control and process system, transmitting system and receiving system. Each of components has been designed and implemented. The test, experiments and validation for each component have been conducted. The experimental results demonstrate that the researched and developed GLiDAR-I can effectively measure the distance about 13 m at the accuracy level about 11cm in lab.

  16. The Status of the Ultra Fast Flash Observatory - Pathfinder

    DEFF Research Database (Denmark)

    Nam, J. W.; Ahmad, S.; Ahn, K. B.

    2014-01-01

    The Ultra Fast Flash Observatory (UFFO) is a project to study early optical emissions from Gamma Ray Bursts (GRBs). The primary scientific goal of UFFO is to see if GRBs can be calibrated with their rising times, so that they could be used as new standard candles. In order to minimize delay in op...

  17. Flashing coupled density wave oscillation

    International Nuclear Information System (INIS)

    Jiang Shengyao; Wu Xinxin; Zhang Youjie

    1997-07-01

    The experiment was performed on the test loop (HRTL-5), which simulates the geometry and system design of the 5 MW reactor. The phenomenon and mechanism of different kinds of two-phase flow instabilities, namely geyser instability, flashing instability and flashing coupled density wave instability are described. The especially interpreted flashing coupled density wave instability has never been studied well, it is analyzed by using a one-dimensional non-thermo equilibrium two-phase flow drift model computer code. Calculations are in good agreement with the experiment results. (5 refs.,5 figs., 1 tab.)

  18. Corrosion testing in flash tanks

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, S.J.; Stead, N.J.

    1999-07-01

    As kraft pulp mills adopt modified cooking processes, an increasing amount of corrosion of carbon steel digester systems is being encountered. Many mills have had severe corrosion in the flash tanks, in particular, the first ({number{underscore}sign}1) flash tank. The work described in this report was aimed at characterizing the corrosion. Coupons of carbon steel, several stainless steels and titanium were exposed at two mills. At mill A, identical sets of coupons were exposed in the {number{underscore}sign}1 and {number{underscore}sign}2 flash tank. At mill B, three identical sets of coupons were placed in flash tank {number{underscore}sign}1. The results of the exposures showed that both carbon steel and titanium suffered high rates of general corrosion, while the stainless steels suffered varying degrees of localized attack. The ranking of the resistance of corrosion in the flash tank was the same ranking as would be expected in a reducing acid environment. In the light of the coupon results, organic acids is concluded to be the most likely cause of corrosion of the flash tanks.

  19. Optical spectra of FLASH generated plasmas

    Czech Academy of Sciences Publication Activity Database

    Stránský, Michal; Rohlena, Karel

    T161, May (2014), s. 1-3, č. článku 014028. ISSN 0031-8949 R&D Projects: GA MŠk EE.2.3.20.0087; GA ČR GAP205/11/0571 Grant - others:OP VK 2 LaserGen(XE) CZ.1.07/2.3.00/20.0087 Institutional support: RVO:68378271 Keywords : laser plasma * spectroscopy * plasma flow * screening Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.126, year: 2014

  20. Muzzle flash localization for the dismounted soldier

    Science.gov (United States)

    Kennedy Scott, Will

    2015-05-01

    The ability to accurately and rapidly know the precise location of enemy fire would be a substantial capability enhancement to the dismounted soldier. Acoustic gun-shot detections systems can provide an approximate bearing but it is desired to precisely know the location (direction and range) of enemy fire; for example to know from `which window' the fire is coming from. Funded by the UK MOD (via Roke Manor Research) QinetiQ is developing an imaging solution built around an InGaAs camera. This paper presents work that QinetiQ has undertaken on the Muzzle Flash Locator system. Key technical challenges that have been overcome are explained and discussed in this paper. They include; the design of the optical sensor and processing hardware to meet low size, weight and power requirements; the algorithm approach required to maintain sensitivity whilst rejecting false alarms from sources such as close passing insects and sun glint from scene objects; and operation on the move. This work shows that such a sensor can provide sufficient sensitivity to detect muzzle flash events to militarily significant ranges and that such a system can be combined with an acoustic gunshot detection system to minimize the false alarm rate. The muzzle flash sensor developed in this work operates in real-time and has a field of view of approximately 29° (horizontal) by 12° (vertical) with a pixel resolution of 0.13°. The work has demonstrated that extension to a sensor with realistic angular rotation rate is feasible.

  1. Impact Flash Physics: Modeling and Comparisons With Experimental Results

    Science.gov (United States)

    Rainey, E.; Stickle, A. M.; Ernst, C. M.; Schultz, P. H.; Mehta, N. L.; Brown, R. C.; Swaminathan, P. K.; Michaelis, C. H.; Erlandson, R. E.

    2015-12-01

    Hypervelocity impacts frequently generate an observable "flash" of light with two components: a short-duration spike due to emissions from vaporized material, and a long-duration peak due to thermal emissions from expanding hot debris. The intensity and duration of these peaks depend on the impact velocity, angle, and the target and projectile mass and composition. Thus remote sensing measurements of planetary impact flashes have the potential to constrain the properties of impacting meteors and improve our understanding of impact flux and cratering processes. Interpreting impact flash measurements requires a thorough understanding of how flash characteristics correlate with impact conditions. Because planetary-scale impacts cannot be replicated in the laboratory, numerical simulations are needed to provide this insight for the solar system. Computational hydrocodes can produce detailed simulations of the impact process, but they lack the radiation physics required to model the optical flash. The Johns Hopkins University Applied Physics Laboratory (APL) developed a model to calculate the optical signature from the hot debris cloud produced by an impact. While the phenomenology of the optical signature is understood, the details required to accurately model it are complicated by uncertainties in material and optical properties and the simplifications required to numerically model radiation from large-scale impacts. Comparisons with laboratory impact experiments allow us to validate our approach and to draw insight regarding processes that occur at all scales in impact events, such as melt generation. We used Sandia National Lab's CTH shock physics hydrocode along with the optical signature model developed at APL to compare with a series of laboratory experiments conducted at the NASA Ames Vertical Gun Range. The experiments used Pyrex projectiles to impact pumice powder targets with velocities ranging from 1 to 6 km/s at angles of 30 and 90 degrees with respect to

  2. FLASH fly-by-light flight control demonstration results overview

    Science.gov (United States)

    Halski, Don J.

    1996-10-01

    The Fly-By-Light Advanced Systems Hardware (FLASH) program developed Fly-By-Light (FBL) and Power-By-Wire (PBW) technologies for military and commercial aircraft. FLASH consists of three tasks. Task 1 developed the fiber optic cable, connectors, testers and installation and maintenance procedures. Task 3 developed advanced smart, rotary thin wing and electro-hydrostatic (EHA) actuators. Task 2, which is the subject of this paper,l focused on integration of fiber optic sensors and data buses with cable plant components from Task 1 and actuators from Task 3 into centralized and distributed flight control systems. Both open loop and piloted hardware-in-the-loop demonstrations were conducted with centralized and distributed flight control architectures incorporating the AS-1773A optical bus, active hand controllers, optical sensors, optimal flight control laws in high speed 32-bit processors, and neural networks for EHA monitoring and fault diagnosis. This paper overviews the systems level testing conducted under the FLASH Flight Control task. Preliminary results are summarized. Companion papers provide additional information.

  3. Flashing light in microalgae biotechnology.

    Science.gov (United States)

    Abu-Ghosh, Said; Fixler, Dror; Dubinsky, Zvy; Iluz, David

    2016-03-01

    Flashing light can enhance photosynthesis and improve the quality and quantity of microalgal biomass, as it can increase the products of interest by magnitudes. Therefore, the integration of flashing light effect into microalgal cultivation systems should be considered. However, microalgae require a balanced mix of the light/dark cycle for higher growth rates, and respond to light intensity differently according to the pigments acquired or lost during the growth. This review highlights recently published results on flashing light effect on microalgae and its applications in biotechnology, as well as the recently developed bioreactors designed to fulfill this effect. It also discusses how this knowledge can be applied in selecting the optimal light frequencies and intensities with specific technical properties for increasing biomass production and/or the yield of the chemicals of interest by microalgae belonging to different genera. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Quick Guide to Flash Catalyst

    CERN Document Server

    Elmansy, Rafiq

    2011-01-01

    How do you transform user interface designs created in Photoshop or Illustrator into interactive web pages? It's easier than you think. This guide shows you how to use Adobe Flash Catalyst to create interactive UIs and website wireframes for Rich Internet Applications-without writing a single line of code. Ideal for web designers, this book introduces Flash Catalyst basics with detailed step-by-step instructions and screenshots that illustrate every part of the process. You'll learn hands-on how to turn your static design or artwork into working user interfaces that can be implemented in Fla

  5. Analytic Perturbation Method for Estimating Ground Flash Fraction from Satellite Lightning Observations

    Science.gov (United States)

    Koshak, William; Solakiewicz, Richard

    2013-01-01

    An analytic perturbation method is introduced for estimating the lightning ground flash fraction in a set of N lightning flashes observed by a satellite lightning mapper. The value of N is large, typically in the thousands, and the observations consist of the maximum optical group area produced by each flash. The method is tested using simulated observations that are based on Optical Transient Detector (OTD) and Lightning Imaging Sensor (LIS) data. National Lightning Detection NetworkTM (NLDN) data is used to determine the flash-type (ground or cloud) of the satellite-observed flashes, and provides the ground flash fraction truth for the simulation runs. It is found that the mean ground flash fraction retrieval errors are below 0.04 across the full range 0-1 under certain simulation conditions. In general, it is demonstrated that the retrieval errors depend on many factors (i.e., the number, N, of satellite observations, the magnitude of random and systematic measurement errors, and the number of samples used to form certain climate distributions employed in the model).

  6. Total Lightning Flash Activity Response to Aerosol over China Area

    Directory of Open Access Journals (Sweden)

    Pengguo Zhao

    2017-01-01

    Full Text Available Twelve years of measurements of aerosol optical depth (AOD, cloud fraction, cloud top height, ice cloud optical thickness and lightning flash density from 2001 to 2012 have been analyzed to investigate the effect of aerosols on electrical activity over an area of China. The results show that increasing aerosol loading inspires the convective intensity, and then increases the lightning flash density. The spatial distribution of the correlation between aerosol loading and electrical activity shows a remarkable regional difference over China. The high-correlation regions embody the positive aerosol microphysical effect on the intensity of the electrical activity, while the large-scale processes may play the main role in convection development and producing lightning in low-correlation regions.

  7. Hot Flashes amd Night Sweats (PDQ)

    Science.gov (United States)

    ... controlled with estrogen replacement therapy. Hot flashes during natural or treatment-related menopause can be controlled with estrogen replacement ... been studied in the treatment of hot flashes. Treatments that help patients cope with stress and anxiety may help manage hot flashes. Treatments ...

  8. Detection of Malicious Flash Banner Advertisements

    Directory of Open Access Journals (Sweden)

    Kirill Alekseevich Samosadnyy

    2014-09-01

    Full Text Available The paper addresses the problem of detecting malicious flash advertisements. As a result, detection method based on dynamic analysis that modify flash application and execute it in Adobe Flash player is proposed and evaluated on synthetic and real world examples.

  9. Flash CS4: The Missing Manual

    CERN Document Server

    Grover, Chris

    2008-01-01

    Unlock the power of Flash and bring gorgeous animations to life onscreen. Flash CS4: The Missing Manual includes a complete primer on animation, a guided tour of the program's tools and capabilities, lots of new illustrations, and more details on working with video. Beginners will learn to use the software in no time, and experienced Flash designers will improve their skills.

  10. Jaan Toomik ajakirjas Flash Art

    Index Scriptorium Estoniae

    1999-01-01

    Kunstiajakirja "Flash Art" maikuu numbris Ando Keskküla artikkel, mis annab ülevaate J. Toomiku loomingust ja peatub pikemalt tema olulisematel töödel. 10. juunist J. Toomiku isiknäitus Londoni fotograafide galeriis. Eksponeeritud video "Uisutaja"

  11. Ingmar Muusikuse foto Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    Flash Arti 1999. a. oktoobrinumbris virtuaalse näituse rubriigis Ando Keskküla artikkel radikaalsemast eesti kunstist ja kunstielust postsotsialistlikul ajastul. Illustratsiooniks Liina Siibi fotokompositsioonid, Ingmar Muusikuse foto Raoul Kurvitza, Ene-Liis Semperi ja Kiwa Eesti Panga performance'ist

  12. Foundation Flash CS4 for Designers

    CERN Document Server

    Green, Tom

    2008-01-01

    In this book, you'll learn:* How to create effective animations using the new Motion Editor and animation tools * How to use the new 3D features to animate objects in 3D space * Best-practice tips and techniques from some of the top Flash practitioners on the planet * How to create captioned video and full-screen video, and deploy HD video using Flash * Techniques for using the Flash UI components as well as XML documents to create stunning,interactive presentations If you're a Flash designer looking for a solid overview of Flash CS4, this book is for you. Through the use of solid and practica

  13. uFlip: Understanding Flash IO Patterns

    DEFF Research Database (Denmark)

    Bouganim, Luc; Jonsson, Bjørn; Bonnet, Philippe

    2009-01-01

    want to establish what kind of IOs should be favored (or avoided) when designing algorithms and architectures for flash-based systems. In this paper, we focus on flash IO patterns, that capture relevant distribution of IOs in time and space, and our goal is to quantify their performance. We define u......FLIP, a benchmark for measuring the response time of flash IO patterns. We also present a benchmarking methodology which takes into account the particular characteristics of flash devices. Finally, we present the results obtained by measuring eleven flash devices, and derive a set of design hints that should drive...

  14. From Sulfide Flash Smelting to a Novel Flash Ironmaking Technology

    Science.gov (United States)

    Sohn, Hong Yong

    A novel flash ironmaking technology is under development at the University of Utah under the support of U.S. Department of Energy (DOE) and American Iron and Steel Institute (AISI). The history of the development from the conception of the idea to the current status will be discussed. The flash ironmaking process produces iron directly from fine iron ore concentrates without requiring cokemaking and pelletization/sintering, which will enable the technology to significantly reduce energy consumption and carbon dioxide emissions compared with blast furnace ironmaking. Unlike other gas-based ironmaking processes, this technology will not suffer from the problems of solid sticking and fusion. Current work is focused on the method of supplying the energy required to maintain the necessary temperature, as an intermediate step to determine the scalability for larger, industrial-scale pilot trials.

  15. Standardized clinical photography: the role of flash.

    Science.gov (United States)

    Cariello, Angelino; Viana, Giovanni André; Osaki, Midori; Pamplona, André Luis; Höfling-Lima, Ana Luisa

    2012-01-01

    Medical photographic documentation is important for professional, research, and ethical concerns. This study analyzed the possible interference that the flash could cause on evaluation of lower eyelid cosmetic results. Standardized photographs with and without flash were taken of 10 patients with dermatochalasis. The photographs were evaluated by 3 independent observers, as before (without flash) and after (with flash) an alternative esthetic treatment of the lower eyelid. The observers rated the overall cosmetic improvement of the lower eyelid photographs on a visual analog scale. The 3 surgeons believed that there was improvement in cosmetic outcome from the first (without flash) to the second (with flash) picture. The results indicate that a simple flash addition in one of 2 consecutive photographs, taken seconds apart, could influence the impression of experienced surgeons on the final outcome of oculoplastic surgeries and may constitute a bias in observer-dependent studies.

  16. Optical dust sensor for the mining industry

    Science.gov (United States)

    Sierakowski, Marek W.; Wolinski, Tomasz R.; Domanski, Andrzej W.; Osinska, Katarzyna

    2003-04-01

    One of many hazards in mining industry is presence of airborne dust on underground boards. Hazards caused by dust generated and spread in mines are of the two types: (1) health risk for miners from airborne dust produced from rocks, coal, soluble minerals (pneumoconiosis, toxicity), (2) danger of explosion of carbon dust. Dust particles produced in mines underground range from 0 to about 400 micrometers, have irregular shapes and prevailingly are strongly light absorbing. It is assumed that the most health-risky are particles between 1 μm and 5 μm in size. They are not visible with naked eyes, so their control and measurement need technical equipment. As a standard in polish mines, gravimetric measurement method is used at present. This method works well in post-event evaluation of total health-risk factor, but is not much useful for instantaneous risk warning. In order to recognize and possibly prevent the dust risk as it appears, other methods have to be used, like optical method. Looking towards this demand, an experimental optical dust sensor is demonstrated. The sensor is based on light scattering effect by dust particles, as usual do devices of this type. Originality of this solution lies in construction details of the sensor. Scattering is a complex function of dust kind, size, shape and concentration. Moreover, operating conditions of such a device are cruel -- humidity, elevated temperature, vibrations, and over-all contact with dust -- are harmful for optics. Thus, to achieve reliable indications of the sensor is really a challenge. This paper describes optical construction attempting to overcome difficulties in obtaining dust concentration sensor intended for mining industry and similar applications. First laboratory and operational tests are also reported.

  17. Spurious dispersion effects at FLASH

    International Nuclear Information System (INIS)

    Prat, Eduard

    2009-07-01

    The performance of the Free-Electron Laser (FEL) process imposes stringent demands on the transverse trajectory and size of the electron beam. Since transverse dispersion changes off-energy particle trajectories and increases the effective beam size, dispersion must be controlled. This thesis treats the concept of dispersion in linacs, and analyses the impact of dispersion on the electron beam and on the FEL process. It presents generation mechanisms for spurious dispersion, quantifying its importance for FLASH (Free-electron Laser in Hamburg) and the XFEL (European X-ray Free-Electron Laser). A method for measuring and correcting dispersion and its implementation in FLASH is described. Experiments of dispersion e ects on the transverse beam quality and on the FEL performance are presented. (orig.)

  18. Flash x-ray cinematography

    International Nuclear Information System (INIS)

    Stein, W.E.

    1976-01-01

    Experiments intended to provide an overview of the potential capabilities and limitations of flash x-ray cinematography as a diagnostic technique for a Fast Reactor Safety Test Facility are described. The results provide estimates of the x-ray pulse intensity required to obtain adequate radiographs of an array of fuel pins in a typical reactor configuration. An estimate of the upper limit on the pulse duration imposed by the reactor background radiation was also determined. X-ray cinematography has been demonstrated at a repetition rate limited only by the recording equipment on hand at the time of these measurements. These preliminary results indicate that flash x-ray cinematography of the motion of fuel in a Fast Reactor Test Facility is technically feasible

  19. Spurious dispersion effects at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Prat, Eduard

    2009-07-15

    The performance of the Free-Electron Laser (FEL) process imposes stringent demands on the transverse trajectory and size of the electron beam. Since transverse dispersion changes off-energy particle trajectories and increases the effective beam size, dispersion must be controlled. This thesis treats the concept of dispersion in linacs, and analyses the impact of dispersion on the electron beam and on the FEL process. It presents generation mechanisms for spurious dispersion, quantifying its importance for FLASH (Free-electron Laser in Hamburg) and the XFEL (European X-ray Free-Electron Laser). A method for measuring and correcting dispersion and its implementation in FLASH is described. Experiments of dispersion e ects on the transverse beam quality and on the FEL performance are presented. (orig.)

  20. Evolutionary characteristics of light flash radiation produced by hypervelocity impact on LY12 aluminum targets

    International Nuclear Information System (INIS)

    Tang Enling; Zhang Wei; Yang Minghai; Xiang Shenghai; Li Lexin; He Liping; Zhang Qingming

    2012-01-01

    Hypervelocity impact experiments were conducted under four experimental conditions to investigate evolutionary characteristics of light flash radiation by using optical pyrometer measurement system established and two-stage light-gas gun loading system. One optical fiber probe was used in every experiment. Evolution of light flash intensity was obtained based on original data and calibration by Matlab programmable treatments under the given experimental condition and the optical-fiber probe scheme. Evolutionary characteristics of radiation temperature were acquired by using ratio methods. Experimental results show that impact light flash intensity and radiation temperature peak value decrease with impact angles increasing in the range of 488 to 667 nm during hypervelocity impact on LY12 Aluminum targets. (authors)

  1. Hot flashes and sleep in women.

    Science.gov (United States)

    Moe, Karen E

    2004-12-01

    Sleep disturbances during menopause are often attributed to nocturnal hot flashes and 'sweats' associated with changing hormone patterns. This paper is a comprehensive critical review of the research on the relationship between sleep disturbance and hot flashes in women. Numerous studies have found a relationship between self-reported hot flashes and sleep complaints. However, hot flash studies using objective sleep assessment techniques such as polysomnography, actigraphy, or quantitative analysis of the sleep EEG are surprisingly scarce and have yielded somewhat mixed results. Much of this limited evidence suggests that hot flashes are associated with objectively identified sleep disruption in at least some women. At least some of the negative data may be due to methodological issues such as reliance upon problematic self-reports of nocturnal hot flashes and a lack of concurrent measures of hot flashes and sleep. The recent development of a reliable and non-intrusive method for objectively identifying hot flashes during the night should help address the need for substantial additional research in this area. Several areas of clinical relevance are described, including the effects of discontinuing combined hormone therapy (estrogen plus progesterone) or estrogen-only therapy, the possibility of hot flashes continuing for many years after menopause, and the link between hot flashes and depression.

  2. Flash characteristics of plasma induced by hypervelocity impact

    Science.gov (United States)

    Zhang, Kai; Long, Renrong; Zhang, Qingming; Xue, Yijiang; Ju, Yuanyuan

    2016-08-01

    Using a two-stage light gas gun, a series of hypervelocity impact experiments was conducted in which 6.4-mm-diameter spherical 2024-aluminum projectiles impact 23-mm-thick targets made of the same material at velocities of 5.0, 5.6, and 6.3 km/s. Both an optical pyrometer composed of six photomultiplier tubes and a spectrograph were used to measure the flash of the plasma during hypervelocity impact. Experimental results show that, at a projectile velocity of 6.3 km/s, the strong flash lasted about 10 μs and reached a temperature of 4300 K. Based on the known emission lines of AL I, spectral methods can provide the plasma electron temperature. An electron-temperature comparison between experiment and theoretical calculation indicates that single ionization and secondary ionization are the two main ionizing modes at velocities 5.0-6.3 km/s.

  3. Optics

    CERN Document Server

    Mathieu, Jean Paul

    1975-01-01

    Optics, Parts 1 and 2 covers electromagnetic optics and quantum optics. The first part of the book examines the various of the important properties common to all electromagnetic radiation. This part also studies electromagnetic waves; electromagnetic optics of transparent isotropic and anisotropic media; diffraction; and two-wave and multi-wave interference. The polarization states of light, the velocity of light, and the special theory of relativity are also examined in this part. The second part is devoted to quantum optics, specifically discussing the classical molecular theory of optical p

  4. Construction and performance of large flash chambers

    International Nuclear Information System (INIS)

    Taylor, F.E.; Bogert, D.; Fisk, R.; Stutte, L.; Walker, J.K.; Wolfson, J.; Abolins, M.; Ernwein, J.; Owen, D.; Lyons, T.

    1979-01-01

    The construction and performance of 12' x 12' flash chambers used in a 340 ton neutrino detector under construction at Fermilab is described. The flash chambers supply digital information with a spatial resolution of 0.2'', and are used to finely sample the shower development of the reaction products of neutrino interactions. The flash chambers are easy and inexpensive to build and are electronically read out

  5. A Durable Flash Memory Search Tree

    OpenAIRE

    Clay III, James; Wortman, Kevin

    2012-01-01

    We consider the task of optimizing the B-tree data structure, used extensively in operating systems and databases, for sustainable usage on multi-level flash memory. Empirical evidence shows that this new flash memory tree, or FM Tree, extends the operational lifespan of each block of flash memory by a factor of roughly 27 to 70 times, while still supporting logarithmic-time search tree operations.

  6. Flash CS5 The Missing Manual

    CERN Document Server

    Grover, Chris

    2010-01-01

    Once you know how to use Flash, you can create everything from simple animations to high-end desktop applications, but it's a complex tool that can be difficult to master on your own-unless you have this Missing Manual. This book will help you learn all you need to know about Flash CS5 to create animations that bring your ideas to life. Learn animation basics. Find everything you need to know to get started with FlashMaster the Flash tools. Learn the animation and effects toolset, with clear explanations and hands-on examplesUse 3D effects. Rotate and put objects in motion in three dimensions

  7. Search Engine Optimization for Flash Best Practices for Using Flash on the Web

    CERN Document Server

    Perkins, Todd

    2009-01-01

    Search Engine Optimization for Flash dispels the myth that Flash-based websites won't show up in a web search by demonstrating exactly what you can do to make your site fully searchable -- no matter how much Flash it contains. You'll learn best practices for using HTML, CSS and JavaScript, as well as SWFObject, for building sites with Flash that will stand tall in search rankings.

  8. Optics

    CERN Document Server

    Fincham, W H A

    2013-01-01

    Optics: Ninth Edition Optics: Ninth Edition covers the work necessary for the specialization in such subjects as ophthalmic optics, optical instruments and lens design. The text includes topics such as the propagation and behavior of light; reflection and refraction - their laws and how different media affect them; lenses - thick and thin, cylindrical and subcylindrical; photometry; dispersion and color; interference; and polarization. Also included are topics such as diffraction and holography; the limitation of beams in optical systems and its effects; and lens systems. The book is recommen

  9. Measurement of hot flashes by sternal skin conductance and subjective hot flash report in Puebla, Mexico.

    Science.gov (United States)

    Sievert, Lynnette Leidy; Freedman, Robert R; Garcia, Jesus Zarain; Foster, Jennifer W; del Carmen Romano Soriano, Ma; Longcope, Christopher; Franz, Charlene

    2002-01-01

    To measure hot flashes by sternal skin conductance in an urban Mexican population and to determine variables associated with hot flash reporting and measurement. From June 1999 to August 2000, 67 perimenopausal women aged 40 to 65 years participated in interviews, anthropometric measures, and a 2-h recording of sternal skin conductance. Changes in sweating were used to demonstrate the presence/absence of a hot flash. During the test, women were asked to report if they experienced a hot flash. During the study period, 10 women reported and demonstrated every hot flash, 24 women never reported or demonstrated a hot flash, 7 demonstrated hot flashes but did not report any of them, 7 reported hot flashes but did not demonstrate any of them, and 19 showed a mixture of responses. Women who demonstrated hot flashes by sternal skin conductance were measured in a warmer room, had more years of education, consumed more eggs as a child, recalled a heavier weight at age 18, and had a lower body mass index at interview compared with women who did not demonstrate hot flashes by sternal skin conductance. Women who subjectively reported hot flashes were measured in a warmer room, were more likely to be postmenopausal, reported more frequent consumption of coffee, and spent fewer months breast-feeding their last child compared with women who did not report the experience of hot flashes during the testing period. Room temperature explained part of the variation between women who did and did not demonstrate hot flashes via sternal skin conductance, between women who did and did not report the experience of hot flashes, and between women who did and did not demonstrate concordance in objective and subjective measures. In addition to room temperature, coffee intake, months spent breast-feeding the last child, and recalled weight at age 18 were important variables predicting hot flash experience.

  10. Monitoring scaling and dental calculus removal with an optical fluorescence system

    International Nuclear Information System (INIS)

    Sivieri-Araujo, G; Fontana, C R; Costa, M M; Kurachi, C; Bagnato, V S; Rastelli, A N S; Pereira, L P C

    2014-01-01

    Fluorescence results from a process that occurs under certain conditions in molecules known as fluorophores, fluorochromes or fluorescent dyes when they absorb light. The molecule is excited to a higher energy state and emits fluorescent light. The emission wavelength is always higher than the excitation wavelength. Optical diagnoses by fluorescence can be used in medicine and dentistry. It does not cause injury to tissues because it is a noninvasive method and can add benefits to clinical treatments. The aim of this case report was to apply an optical fluorescence system for wide-field image viewing and visual monitoring of the management of plaque and dental calculus before and after periodontal scaling to improve the diagnoses and follow-up of patients with periodontal disease. The results suggest that it is possible to observe, with a fluorescence system, residual plaque and calculus that were not easily seen by the naked eye during oral inspection. Thus, the optical technique can potentially improve periodontal screening efforts, especially in patients undergoing periodontal maintenance. (paper)

  11. Rh-flash acquisition card

    International Nuclear Information System (INIS)

    Bourrion, O.

    2003-01-01

    The rh-flash card main purpose is to convert and store the image of the analog data present at input into an output buffer, namely in a given timing window besides a stop signal (like a digital oscilloscope). It is conceived in VME format 1U wide with an additional connector. Novelty of this card is its ability to sample at a high frequency, due to flash coders, and this at a high repetition rate. To do that the card allows the storage of the data considered 'useful' and that is done by storing only the data exceeding a certain threshold. This can be useful for instance for viewing peaks in a spectrum, and obtaining their relative location. The goal is to stock and process the data sampled before and after the arrival of a stop signal (what entails a storage depth). A threshold is defined and any peak exceeding its level will really be stored in the output buffer which is readable through the VME bus. The peak values will be stored as well as m preceding and n subsequent values (both programmable). Obviously, if the threshold is zero the system of data processing is off and all data will be stored. The document is structured on six sections titled: 1. Description; 2. Specifications; 3. Explaining the design of channels; 4. Explaining the shared part of the design; 5. Addressing (→ user guide); 6. Software precautions. (author)

  12. On multiphase negative flash for ideal solutions

    DEFF Research Database (Denmark)

    Yan, Wei; Stenby, Erling Halfdan

    2012-01-01

    There is a recent interest to solve multiphase negative flash problems where the phase amounts can be negative for normal positive feed composition. Solving such a negative flash problem using successive substitution needs an inner loop for phase distribution calculation at constant fugacity...

  13. Theoretical Characterizaiton of Visual Signatures (Muzzle Flash)

    Science.gov (United States)

    Kashinski, D. O.; Scales, A. N.; Vanderley, D. L.; Chase, G. M.; di Nallo, O. E.; Byrd, E. F. C.

    2014-05-01

    We are investigating the accuracy of theoretical models used to predict the visible, ultraviolet and infrared spectra of product materials ejected from the muzzle of currently fielded systems. Recent advances in solid propellants has made the management of muzzle signature (flash) a principle issue in weapons development across the calibers. A priori prediction of the electromagnetic spectra of formulations will allow researchers to tailor blends that yield desired signatures and determine spectrographic detection ranges. We are currently employing quantum chemistry methods at various levels of sophistication to optimize molecular geometries, compute vibrational frequencies, and determine the optical spectra of specific gas-phase molecules and radicals of interest. Electronic excitations are being computed using Time Dependent Density Functional Theory (TD-DFT). A comparison of computational results to experimental values found in the literature is used to assess the affect of basis set and functional choice on calculation accuracy. The current status of this work will be presented at the conference. Work supported by the ARL, and USMA.

  14. All-digital full waveform recording photon counting flash lidar

    Science.gov (United States)

    Grund, Christian J.; Harwit, Alex

    2010-08-01

    Current generation analog and photon counting flash lidar approaches suffer from limitation in waveform depth, dynamic range, sensitivity, false alarm rates, optical acceptance angle (f/#), optical and electronic cross talk, and pixel density. To address these issues Ball Aerospace is developing a new approach to flash lidar that employs direct coupling of a photocathode and microchannel plate front end to a high-speed, pipelined, all-digital Read Out Integrated Circuit (ROIC) to achieve photon-counting temporal waveform capture in each pixel on each laser return pulse. A unique characteristic is the absence of performance-limiting analog or mixed signal components. When implemented in 65nm CMOS technology, the Ball Intensified Imaging Photon Counting (I2PC) flash lidar FPA technology can record up to 300 photon arrivals in each pixel with 100 ps resolution on each photon return, with up to 6000 range bins in each pixel. The architecture supports near 100% fill factor and fast optical system designs (f/#60 dB ultimate dynamic range improvement, and >104 reductions in false alarm rates are anticipated, while achieving single photon range precision better than 1cm. I2PC significantly extends long-range and low-power hard target imaging capabilities useful for autonomous hazard avoidance (ALHAT), navigation, imaging vibrometry, and inspection applications, and enables scannerless 3D imaging for distributed target applications such as range-resolved atmospheric remote sensing, vegetation canopies, and camouflage penetration from terrestrial, airborne, GEO, and LEO platforms. We discuss the I2PC architecture, development status, anticipated performance advantages, and limitations.

  15. Optics

    CERN Document Server

    Fincham, W H A

    2013-01-01

    Optics: Eighth Edition covers the work necessary for the specialization in such subjects as ophthalmic optics, optical instruments and lens design. The text includes topics such as the propagation and behavior of light; reflection and refraction - their laws and how different media affect them; lenses - thick and thin, cylindrical and subcylindrical; photometry; dispersion and color; interference; and polarization. Also included are topics such as diffraction and holography; the limitation of beams in optical systems and its effects; and lens systems. The book is recommended for engineering st

  16. FLASH Interface; a GUI for managing runtime parameters in FLASH simulations

    Science.gov (United States)

    Walker, Christopher; Tzeferacos, Petros; Weide, Klaus; Lamb, Donald; Flocke, Norbert; Feister, Scott

    2017-10-01

    We present FLASH Interface, a novel graphical user interface (GUI) for managing runtime parameters in simulations performed with the FLASH code. FLASH Interface supports full text search of available parameters; provides descriptions of each parameter's role and function; allows for the filtering of parameters based on categories; performs input validation; and maintains all comments and non-parameter information already present in existing parameter files. The GUI can be used to edit existing parameter files or generate new ones. FLASH Interface is open source and was implemented with the Electron framework, making it available on Mac OSX, Windows, and Linux operating systems. The new interface lowers the entry barrier for new FLASH users and provides an easy-to-use tool for experienced FLASH simulators. U.S. Department of Energy (DOE), NNSA ASC/Alliances Center for Astrophysical Thermonuclear Flashes, U.S. DOE NNSA ASC through the Argonne Institute for Computing in Science, U.S. National Science Foundation.

  17. Ultra-Fast Flash Observatory for the observation of early photons from gamma-ray bursts

    DEFF Research Database (Denmark)

    Park, I H; Brandt, Søren; Budtz-Jørgensen, Carl

    2013-01-01

    One of the least documented and understood aspects of gamma-ray bursts (GRBs) is the rise phase of the optical light curve. The Ultra-Fast Flash Observatory (UFFO) is an effort to address this question through extraordinary opportunities presented by a series of space missions including a small s...

  18. Design and implementation of electronics and data acquisition system for Ultra-Fast Flash Observatory

    DEFF Research Database (Denmark)

    Jung, A.; Ahmad, S.; Barrillon, P.

    2013-01-01

    The Ultra-Fast Flash Observatory (UFFO) Pathfinder for Gamma-Ray Bursts (GRBs) consists of two telescopes. The UFFO Burst Alert & Trigger Telescope (UBAT) handles the detection and localization of GRBs, and the Slewing Mirror Telescope (SMT) conducts the measurement of the UV/optical afterglow. U...

  19. Naked-eye detection of potassium ions in a novel gold nanoparticle aggregation-based aptasensor

    Science.gov (United States)

    Naderi, Mahboube; Hosseini, Morteza; Ganjali, Mohammad Reza

    2018-04-01

    In this work, we studied the feasibility of interaction among gold nanoparticles (AuNPs) and a cationic dye in an aptasensor system for the detection of potassium ions. The presence and absence of potassium in the solution was distinguishable by different colors (between orange and green) appeared after reaction. Cationic dye (Y5GL) acts as a new aggregator for AuNP-based sensors which changes the aggregated AuNP solution color from blue-purple to green. In the presence of K+ ions, the aptamer dissociated from the surface of the AuNP so that free AuNPs and cationic dye make the solution green. The aptasensor showed that the analytical linear range was from 10 nM to 50 mM and the detection limit was 4.4 nM. Also, we examined the practicality of this method on a simple paper based platform. The linear range of the colorimetric paper sensor covered of K+ concentration from 10 μM to 40 mM and the detection limit of 6.2 μM was obtained. The selectivity of AuNP aggregation-based sensor improved by the use of cationic dye. Rapidity, simplicity, high sensitivity and excellent selectivity made this assay suitable for practical determination of K+ in real urine samples.

  20. Naked eye detection of infertility based on sperm protamine-induced aggregation of heparin gold nanoparticles.

    Science.gov (United States)

    Vidya, Raj; Saji, Alex

    2018-05-01

    The development of an easy to use, one-pot, environmentally friendly, non-invasive and label-free colorimetric probe for the determination of semen protamines, the biochemical marker of male fertility, using heparin gold nanoparticles (HAuNPs) is presented. The affinity of HAuNPs for protamines was due to the electrostatic interactions between polycationic protamine and polyanionic heparin. The binding of HAuNPs to protamine was characterized by variation in the plasmon absorption spectra followed by a visibly observable colour change of the solution from red to blue. We observed a red shift in the plasmon peak and the method exhibited linearity in the range of 10-70 ng/mL with a detection limit of 5 ng/mL, which is much lower than that reported for colorimetric sensors of protamine. The colour change and the variation in the absorbance of HAuNPs were highly specific for protamines in the presence of different interfering compounds and the method was successfully applied for determining protamine in real samples of semen and serum. Rather than a quantitative estimation, it seems that the method provides a quick screening between a large array of positive and negative samples and, moreover, it maintains the privacy of the user. The method appears to be simple and would be very useful in third-world countries where high-tech diagnostic aids are inaccessible to the majority of the population. Graphical Abstract Heparin gold nanoparticles aided visual detection of infertility.

  1. Characterisation of colloidal drug delivery systems from the naked eye to Cryo-FESEM

    DEFF Research Database (Denmark)

    Krauel, Karen; Girvan, Liz; Hook, Sarah

    2007-01-01

    Poly(ethylcyanoacrylate) nanoparticles prepared by interfacial polymerisation on the basis of microemulsions were prepared in this study and both colloidal systems, nanoparticles and microemulsions, were analysed by visual observation and several microscopic techniques. Phase boundaries for the m...

  2. [Nikola Tesla: flashes of inspiration].

    Science.gov (United States)

    Villarejo-Galende, Albero; Herrero-San Martín, Alejandro

    2013-01-16

    Nikola Tesla (1856-1943) was one of the greatest inventors in history and a key player in the revolution that led to the large-scale use of electricity. He also made important contributions to such diverse fields as x-rays, remote control, radio, the theory of consciousness or electromagnetism. In his honour, the international unit of magnetic induction was named after him. Yet, his fame is scarce in comparison with that of other inventors of the time, such as Edison, with whom he had several heated arguments. He was a rather odd, reserved person who lived for his inventions, the ideas for which came to him in moments of inspiration. In his autobiography he relates these flashes with a number of neuropsychiatric manifestations, which can be seen to include migraine auras, synaesthesiae, obsessions and compulsions.

  3. Cosmic X-ray Flashes Reveal Their Distance

    Science.gov (United States)

    2003-09-01

    Astronomers using X-ray, radio, and optical telescopes have announced a big leap in solving the origin of mysterious objects known as X-ray flashes (XRFs) by finding that they originate from blue star forming galaxies. This discovery of the cosmic distance scale effectively ends the widely-held speculation that XRFs are the death-cries from stars exploding in the infant universe. X-ray flashes resemble a lower energy and longer-duration version of a gamma-ray burst, an energetic explosion thought to signal the death of a massive star. The properties of XRFs led to speculation that they were gamma-ray bursts that occurred less than a few billion years after the Big Bang, and whose light had been subsequently weakened and time-stretched by the expansion of the universe. "Now that the very distant origin has been ruled out, X-ray flashes could be due to exploding massive stars, just like gamma-ray bursts" explained Dr. Joshua Bloom at the Harvard-Smithsonian Center for Astrophysics in Cambridge, Mass., lead author on the paper announcing the results to be published in The Astrophysical Journal. Bloom continued: "But the explosion from an X-ray flash would need to contain less matter or less energy than a typical gamma-ray burst. Alternatively, X-ray flashes could be gamma-ray bursts viewed off-axis." These results are being discussed at the "30th Anniversary of the Discovery of Gamma-ray Bursts" conference currently being held in Sante Fe, New Mexico. The location of the sources studied by Bloom's group required a careful coordination of NASA's Chandra X-ray Observatory and Hubble Space Telescope, along with the National Radio Astronomy Observatory's Very Large Array (VLA) in Socorro, New Mexico. Chandra and the VLA provided a precise location of the fading X-ray and radio "afterglow" of two X-ray flashes known as XRF 011030 and XRF 020427. The Hubble Space Telescope was used to identify and study galaxies at these locations and estimate their distances to between

  4. Creation of visible artificial optical emissions in the aurora by high-power radio waves.

    Science.gov (United States)

    Pedersen, Todd R; Gerken, Elizabeth A

    2005-02-03

    Generation of artificial light in the sky by means of high-power radio waves interacting with the ionospheric plasma has been envisaged since the early days of radio exploration of the upper atmosphere, with proposed applications ranging from regional night-time street lighting to atmospheric measurements. Weak optical emissions have been produced for decades in such ionospheric 'heating' experiments, where they serve as key indicators of electron acceleration, thermal heating, and other effects of incompletely understood wave-particle interactions in the plasma under conditions difficult to replicate in the laboratory. The extremely low intensities produced previously have, however, required sensitive instrumentation for detection, preventing applications beyond scientific research. Here we report observations of radio-induced optical emissions bright enough to be seen by the naked eye, and produced not in the quiet mid-latitude ionosphere, but in the midst of a pulsating natural aurora. This may open the door to visual applications of ionospheric heating technology or provide a way to probe the dynamics of the natural aurora and magnetosphere.

  5. Non Volatile Flash Memory Radiation Tests

    Science.gov (United States)

    Irom, Farokh; Nguyen, Duc N.; Allen, Greg

    2012-01-01

    Commercial flash memory industry has experienced a fast growth in the recent years, because of their wide spread usage in cell phones, mp3 players and digital cameras. On the other hand, there has been increased interest in the use of high density commercial nonvolatile flash memories in space because of ever increasing data requirements and strict power requirements. Because of flash memories complex structure; they cannot be treated as just simple memories in regards to testing and analysis. It becomes quite challenging to determine how they will respond in radiation environments.

  6. Flash memory in embedded Java programs

    DEFF Research Database (Denmark)

    Korsholm, Stephan Erbs

    This paper introduces a Java execution environment with the capability for storing constant heap data in Flash, thus saving valuable RAM. The extension is motivated by the structure of three industrial applications which demonstrate the need for storing constant data in Flash on small embedded...... devices. The paper introduces the concept of host initialization of constant data to prepare a Flash image of constant data that can be kept outside the heap during runtime. The concept is implemented in an interpreter based Java execution environment....

  7. Flash memory in embedded Java programs

    DEFF Research Database (Denmark)

    Korsholm, Stephan Erbs

    2011-01-01

    This paper introduces a Java execution environment with the capability for storing constant heap data in Flash, thus saving valuable RAM. The extension is motivated by the structure of three industrial applications which demonstrate the need for storing constant data in Flash on small embedded...... devices. The paper introduces the concept of host initialization of constant data to prepare a Flash image of constant data that can be kept outside the heap during runtime. The concept is implemented in an interpreter based Java execution environment....

  8. Method and apparatus for implementing material thermal property measurement by flash thermal imaging

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Jiangang

    2017-11-14

    A method and apparatus are provided for implementing measurement of material thermal properties including measurement of thermal effusivity of a coating and/or film or a bulk material of uniform property. The test apparatus includes an infrared camera, a data acquisition and processing computer coupled to the infrared camera for acquiring and processing thermal image data, a flash lamp providing an input of heat onto the surface of a two-layer sample with an enhanced optical filter covering the flash lamp attenuating an entire infrared wavelength range with a series of thermal images is taken of the surface of the two-layer sample.

  9. Characteristics of cloud-to-ground lightning flashes over Sweden

    International Nuclear Information System (INIS)

    Sonnadara, Upul; Cooray, Vernon; Goetschl, Thomas

    2006-01-01

    A detailed study of the characteristics of cloud-to-ground (CG) lightning flashes over Sweden was carried out for the period 1987-2000 using data obtained from the Swedish lightning-locating network. Results are presented by analysing over half a million lightning ground flashes. The average variation of the annual mean of the total number of flashes was found to be 37%. About 12% of the CG flashes were positive flashes and their average variation about the annual mean was 26%. The average peak currents were fairly constant over the years with variations as little as 4% for negative flashes and 5% for positive flashes. The average peak current values for negative and positive flashes were -29.90 and +63.97 kA respectively. A correlation between the mean monthly flash count and percentage of positive flashes was seen. A similar relationship is seen with the mean monthly flash count and the peak currents for both polarities. In general, high flash density and high peak currents were observed in the southern part of Sweden where most of the major cities are located. Flash densities exceeding 0.4 flashes km -2 were observed for several large cities. The maximum flash rate of 32 flashes h -1 within a 10 km radius was seen in Joenkoeping (14.18 0 E, 57.78 0 N) in the province of Smaaland

  10. Ultra-Fast Flash Observatory for observation of early photons from gamma ray bursts

    DEFF Research Database (Denmark)

    Park, I. H.; Ahmad, S.; Barrillon, P.

    2012-01-01

    We describe the space project of Ultra-Fast Flash Observatory (UFFO) which will observe early optical photons from gamma-ray bursts (GRBs) with a sub-second optical response, for the first time. The UFFO will probe the early optical rise of GRBs, opening a completely new frontier in GRB and trans...... of GRB mechanisms, and potentially open up the z<10 universe to study via GRB as point source emission probes.© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only....

  11. Flash Point: Evaluation, Experimentation and Estimation

    Science.gov (United States)

    Rowley, J. R.; Freeman, D. K.; Rowley, R. L.; Oscarson, J. L.; Giles, N. F.; Wilding, W. V.

    2010-05-01

    The flash point is an important indicator of the flammability of a chemical. For safety purposes, many data compilations report the lowest value and not the most likely. This practice, combined with improper documentation and poor data storage methods, has resulted in compilations filled with fire-hazard data that are inconsistent with related properties and between members of homologous chemical series. In this study, the flash points reported in the DIPPR® 801 database and more than 1,400 other literature values were critically reviewed based on measurement method, inter-property relations, and trends in chemical series. New measurements for seven compounds illustrate the differences between experimental flash points and data commonly found in fire-hazard compilations. With a critically reviewed set of experimental data, published predictive methods for the flash point were evaluated for accuracy.

  12. Highly Sensitive Flash LADAR Camera, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — A highly sensitive 640 x 480-element flash LADAR camera will be developed that is capable of 100-Hz rates with better than 5-cm range precision. The design is based...

  13. MR colonography with fecal tagging: comparison between 2D turbo FLASH and 3D FLASH sequences

    International Nuclear Information System (INIS)

    Papanikolaou, Nickolas; Grammatikakis, John; Maris, Thomas; Prassopoulos, Panos; Gourtsoyiannis, Nicholas; Lauenstein, Thomas

    2003-01-01

    The objective of this study was to compare inversion recovery turbo 2D fast low-angle shot (FLASH) and 3D FLASH sequences for fecal-tagged MR colonography studies. Fifteen consecutive patients with indications for colonoscopy underwent MR colonography with fecal tagging. An inversion recovery turbo-FLASH sequence was applied and compared in terms of artifacts presence, efficiency for masking residual stool, and colonic wall conspicuity with a fat-saturated 3D FLASH sequence. Both sequences were acquired following administration of paramagnetic contrast agent. Contrast-to-noise ratio and relative contrast between colonic wall and lumen were calculated and compared for both sequences. Turbo 2D FLASH provided fewer artifacts, higher efficiency for masking the residual stool, and colonic wall conspicuity equivalent to 3D FLASH. An inversion time of 10 ms provided homogeneously low signal intensity of the colonic lumen. Contrast to noise between colonic wall and lumen was significantly higher in the 3D FLASH images, whereas differences in relative contrast were not statistically significant. An optimized inversion-recovery 2D turbo-FLASH sequence provides better fecal tagging results and should be added to the 3D FLASH sequence when designing dark-lumen MR colonography examination protocols. (orig.)

  14. Hydrodynamic simulations of the core helium flash

    Science.gov (United States)

    Mocák, Miroslav; Müller, Ewald; Weiss, Achim; Kifonidis, Konstantinos

    2008-10-01

    We desribe and discuss hydrodynamic simulations of the core helium flash using an initial model of a 1.25 M⊙ star with a metallicity of 0.02 near at its peak. Past research concerned with the dynamics of the core helium flash is inconclusive. Its results range from a confirmation of the standard picture, where the star remains in hydrostatic equilibrium during the flash (Deupree 1996), to a disruption or a significant mass loss of the star (Edwards 1969; Cole & Deupree 1980). However, the most recent multidimensional hydrodynamic study (Dearborn et al. 2006) suggests a quiescent behavior of the core helium flash and seems to rule out an explosive scenario. Here we present partial results of a new comprehensive study of the core helium flash, which seem to confirm this qualitative behavior and give a better insight into operation of the convection zone powered by helium burning during the flash. The hydrodynamic evolution is followed on a computational grid in spherical coordinates using our new version of the multi-dimensional hydrodynamic code HERAKLES, which is based on a direct Eulerian implementation of the piecewise parabolic method.

  15. On Stellar Flash Echoes from Circular Rings

    Science.gov (United States)

    Nemiroff, Robert; Mukherjee, Oindabi

    2018-01-01

    A flash -- or any episode of variability -- that occurs in the vicinity of a circular ring might be seen several times later, simultaneously, as echoes on the ring. Effective images of the flash are created and annihilated in pairs, with as many as four flash images visible concurrently. Videos detailing sequences of image pair creation, tandem motion, and subsequent image annihilation are shown, given simple opacity and scattering assumptions. It is proven that, surprisingly, images from a second pair creation event always annihilate with images from the first. Caustic surfaces between flash locations yielding two and four images are computed. Although such ring echos surely occur, their practical detection might be difficult as it could require dedicated observing programs involving sensitive photometry of extended objects. Potential flash sources include planetary and interstellar gas and dust rings near and around variable stars, flare stars, novae, supernovae, and GRBs. Potentially recoverable information includes size, distance, temporal history, and angular isotropy of both the ring and flash.

  16. An electronic flash lamp system to replace the traditional explosively driven light source

    Science.gov (United States)

    Stigman, William L.; Kihara, Ronald; Scarpetti, Raymond D.

    2003-07-01

    Electronic flash lamps are being developed at the Lawrence Livermore National Laboratory (LLNL). These lamps are intended to replace the traditional explosively driven Argon-gas filled light sources (Argon candles) that are currently used to provide illumination for high speed rotating mirror-framing cameras. At Livermore, we are developing an electronic flash lamp system that can match or exceed the light output of a traditional Argon candle. These systems utilize a Plasma Arc Lamp developed by PRISM Science Inc of Woburn, MA, USA. In the past, high-speed photography requiring explosively driven light sources were a one-time-only even that destroyed fixtures and optical alignment. The electronic flash lamp system, utilizing the Plasma ArC Lamp, will replace the explosively driven lighting systems and provide the capability to dry run experimental setups and repeat tests without damage to the experimental set-up. The electronic flash lamp system eliminates the problem of collateral damage to the experiment and does not add to the overall amount of explosives needed for single test. Since the Pulsed-Power driver is remotely located, only the flash lamp itself is destroyed when the explosive shot is fired. The flexible geometry of this light source also enables the user to create complex light patterns as well as photograph very large areas with a single lighting system. This electronic flash lamp system will provide an extremely bright, stable, and repeatable light source for rotating-mirror framing cameras operating at one million frames per second, using both black & white or color films. The design of the Pulsed-Power driver and the flash lamp, along with experimental data and results will be discussed.

  17. FPGA Flash Memory High Speed Data Acquisition

    Science.gov (United States)

    Gonzalez, April

    2013-01-01

    The purpose of this research is to design and implement a VHDL ONFI Controller module for a Modular Instrumentation System. The goal of the Modular Instrumentation System will be to have a low power device that will store data and send the data at a low speed to a processor. The benefit of such a system will give an advantage over other purchased binary IP due to the capability of allowing NASA to re-use and modify the memory controller module. To accomplish the performance criteria of a low power system, an in house auxiliary board (Flash/ADC board), FPGA development kit, debug board, and modular instrumentation board will be jointly used for the data acquisition. The Flash/ADC board contains four, 1 MSPS, input channel signals and an Open NAND Flash memory module with an analog to digital converter. The ADC, data bits, and control line signals from the board are sent to an Microsemi/Actel FPGA development kit for VHDL programming of the flash memory WRITE, READ, READ STATUS, ERASE, and RESET operation waveforms using Libero software. The debug board will be used for verification of the analog input signal and be able to communicate via serial interface with the module instrumentation. The scope of the new controller module was to find and develop an ONFI controller with the debug board layout designed and completed for manufacture. Successful flash memory operation waveform test routines were completed, simulated, and tested to work on the FPGA board. Through connection of the Flash/ADC board with the FPGA, it was found that the device specifications were not being meet with Vdd reaching half of its voltage. Further testing showed that it was the manufactured Flash/ADC board that contained a misalignment with the ONFI memory module traces. The errors proved to be too great to fix in the time limit set for the project.

  18. Dental optical coherence tomography: new potential diagnostic system for cracked-tooth syndrome.

    Science.gov (United States)

    Lee, Sang-Hee; Lee, Jong-Jin; Chung, Hyun-Jin; Park, Jong-Tae; Kim, Hee-Jin

    2016-01-01

    The aim of the present study was to determine the reliability of optical coherence tomography (OCT) in detecting cracked teeth and its relative clinical effectiveness by comparing it with other diagnostic methods including conventional visual inspection, trans-illumination, and micro-computed tomography (micro-CT). The reliability of swept source OCT (SS-OCT) was verified by comparing the number of detected crack lines on 109 surfaces of 61 teeth with those detected with other conventional methods. One to one comparison revealed that crack lines that were invisible with naked eyes could be found in SS-OCT images. The detection ability of SS-OCT was superior or similar to those of micro-CT (100.0 %) and trans-illumination. Crack lines shown in the SS-OCT images had distinct characteristics, and structural crack lines and craze lines could be distinguished in SS-OCT images. Thus, the detection ability of SS-OCT renders it an acceptable diagnostic device for cracked-tooth syndrome.

  19. An Optical Biosensing Strategy Based on Selective Light Absorption and Wavelength Filtering from Chromogenic Reaction

    Directory of Open Access Journals (Sweden)

    Hyeong Jin Chun

    2018-03-01

    Full Text Available To overcome the time and space constraints in disease diagnosis via the biosensing approach, we developed a new signal-transducing strategy that can be applied to colorimetric optical biosensors. Our study is focused on implementation of a signal transduction technology that can directly translate the color intensity signals—that require complicated optical equipment for the analysis—into signals that can be easily counted with the naked eye. Based on the selective light absorption and wavelength-filtering principles, our new optical signaling transducer was built from a common computer monitor and a smartphone. In this signal transducer, the liquid crystal display (LCD panel of the computer monitor served as a light source and a signal guide generator. In addition, the smartphone was used as an optical receiver and signal display. As a biorecognition layer, a transparent and soft material-based biosensing channel was employed generating blue output via a target-specific bienzymatic chromogenic reaction. Using graphics editor software, we displayed the optical signal guide patterns containing multiple polygons (a triangle, circle, pentagon, heptagon, and 3/4 circle, each associated with a specified color ratio on the LCD monitor panel. During observation of signal guide patterns displayed on the LCD monitor panel using a smartphone camera via the target analyte-loaded biosensing channel as a color-filtering layer, the number of observed polygons changed according to the concentration of the target analyte via the spectral correlation between absorbance changes in a solution of the biosensing channel and color emission properties of each type of polygon. By simple counting of the changes in the number of polygons registered by the smartphone camera, we could efficiently measure the concentration of a target analyte in a sample without complicated and expensive optical instruments. In a demonstration test on glucose as a model analyte, we

  20. General review of flashing jet studies.

    Science.gov (United States)

    Polanco, Geanette; Holdø, Arne Erik; Munday, George

    2010-01-15

    The major concern on the management of superheated liquids, in industrial environments, is the large potential hazards involved in cases of any accidental release. There is a possibility that a violent phase change could take place inside the fluid released generating a flashing jet. This violent phase change might produce catastrophic consequences, such as explosions, fires or toxic exposure, in the installations and in the surroundings. The knowledge and understanding of the mechanisms involved in those releases become an important issue in the prevention of these consequences and the minimization of their impact. This work presents a comprehensive review of information about flashing processes. The review begins with a description of the single phase jet followed by a description of the two-phase flashing jet. The concepts and implications of the thermodynamic and mechanical effects on the behaviour of the jets are considered at the beginning of the review. Following the review is devoted to the classification of the different study approaches used to understand flashing processes in the past, highlighting various critical parameters on the behaviour and the hazard consequences of flashing jets. The review also contains an extensive compilation of experimental, theoretical and numerical data relating to these phenomena, which includes information on the distinct characteristics of the jet, since type of jet, velocity distribution, expansion angle and mass phase change all require individual estimation.

  1. Flash characteristics of plasma induced by hypervelocity impact

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Kai [State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081 (China); Beijing Automotive Technology Center, Beijing 100021 (China); Long, Renrong, E-mail: longrenrong@bit.edu.cn, E-mail: qmzhang@bit.edu.cn; Zhang, Qingming, E-mail: longrenrong@bit.edu.cn, E-mail: qmzhang@bit.edu.cn; Xue, Yijiang; Ju, Yuanyuan [State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081 (China)

    2016-08-15

    Using a two-stage light gas gun, a series of hypervelocity impact experiments was conducted in which 6.4-mm-diameter spherical 2024-aluminum projectiles impact 23-mm-thick targets made of the same material at velocities of 5.0, 5.6, and 6.3 km/s. Both an optical pyrometer composed of six photomultiplier tubes and a spectrograph were used to measure the flash of the plasma during hypervelocity impact. Experimental results show that, at a projectile velocity of 6.3 km/s, the strong flash lasted about 10 μs and reached a temperature of 4300 K. Based on the known emission lines of AL I, spectral methods can provide the plasma electron temperature. An electron-temperature comparison between experiment and theoretical calculation indicates that single ionization and secondary ionization are the two main ionizing modes at velocities 5.0–6.3 km/s.

  2. A void distribution model-flashing flow

    International Nuclear Information System (INIS)

    Riznic, J.; Ishii, M.; Afgan, N.

    1987-01-01

    A new model for flashing flow based on wall nucleations is proposed here and the model predictions are compared with some experimental data. In order to calculate the bubble number density, the bubble number transport equation with a distributed source from the wall nucleation sites was used. Thus it was possible to avoid the usual assumption of a constant bubble number density. Comparisons of the model with the data shows that the model based on the nucleation site density correlation appears to be acceptable to describe the vapor generation in the flashing flow. For the limited data examined, the comparisons show rather satisfactory agreement without using a floating parameter to adjust the model. This result indicated that, at least for the experimental conditions considered here, the mechanistic predictions of the flashing phenomenon is possible on the present wall nucleation based model

  3. Mental models of flash floods and landslides.

    Science.gov (United States)

    Wagner, Klaus

    2007-06-01

    Perceptions of flash floods and landslides were analyzed in four communities of the Bavarian Alps using the mental model approach. Thirty-eight qualitative interviews, two telephone surveys with 600 respondents, and two onsite interviews (74/95 respondents) were conducted. Mental models concerning flash floods are much better developed than those for landslides because the key physical processes for flash floods are easier for the general public to recognize and understand. Mental models are influenced by the local conditions. People who have a better knowledge about the hazards are those who use many different sources to inform themselves, express fear about natural hazards, or have previous experience with hazards. Conclusions for how to improve information for the general public are discussed.

  4. Optical pulses, lasers, measuring techniques

    CERN Document Server

    Früngel, Frank B A

    1965-01-01

    High Speed Pulse Technology: Volume II: Optical Pulses - Lasers - Measuring Techniques focuses on the theoretical and engineering problems that result from the capacitor discharge technique.This book is organized into three main topics: light flash production from a capacitive energy storage; signal transmission and ranging systems by capacitor discharges and lasers; and impulse measuring technique. This text specifically discusses the air spark under atmospheric conditions, industrial equipment for laser flashing, and claims for light transmitting system. The application of light impulse sign

  5. An Analysis of Total Lightning Flash Rates Over Florida

    Science.gov (United States)

    Mazzetti, Thomas O.; Fuelberg, Henry E.

    2017-12-01

    Although Florida is known as the "Sunshine State", it also contains the greatest lightning flash densities in the United States. Flash density has received considerable attention in the literature, but lightning flash rate has received much less attention. We use data from the Earth Networks Total Lightning Network (ENTLN) to produce a 5 year (2010-2014) set of statistics regarding total flash rates over Florida and adjacent regions. Instead of tracking individual storms, we superimpose a 0.2° × 0.2° grid over the study region and count both cloud-to-ground (CG) and in-cloud (IC) flashes over 5 min intervals. Results show that the distribution of total flash rates is highly skewed toward small values, whereas the greatest rate is 185 flashes min-1. Greatest average annual flash rates ( 3 flashes min-1) are located near Orlando. The southernmost peninsula, North Florida, and the Florida Panhandle exhibit smaller average annual flash rates ( 1.5 flashes min-1). Large flash rates > 100 flashes min-1 can occur during any season, at any time during the 24 h period, and at any location within the domain. However, they are most likely during the afternoon and early evening in East Central Florida during the spring and summer months.

  6. Flash Builder 4 and Flex 4 Bible

    CERN Document Server

    Gassner, David

    2010-01-01

    A complete and thorough reference for developers on the new Flex 4 platform. Create desktop applications that behave identically on Windows, Mac OS X, and Linux with Adobe's new Flash Builder 4 platform and this in-depth guide. The book's tutorials and explanations walk you step-by-step through Flash Builder's new, faster tools; the new framework for generating code; how to connect to popular application servers; upgrading from Flex 3; and much more.: Shows you how to create rich applications for the Web and desktop with the very latest version of Flex, with detailed coverage for both new and

  7. Heat Transfer in a Flash Fuser.

    Science.gov (United States)

    Baumann, Gerald Walter

    Flash fusing is used in high speed electrophotographic computer printers to melt the thermoplastic printed image on the paper surface. This technology is not yet well understood, even though it has been used in several different machines. Consequently current fusers may be far from optimum. The aim of this research is to formulate and confirm mathematical models of the fuser. The fusing process was modelled by transient thermal conduction. The toner was assumed to fuse to the paper when its lower surface, against the paper, reached its melting point. The temperature depends on the power input to the toner from the flash tube. Hence, mathematical models were developed to describe both the electrical conduction and radiation characteristics of the flash tube. These models were coupled to the equations describing the electrical drive circuits, and the instantaneous output of the flash was computed. These results were then used in the transient heat conduction model of the toner and paper. A ballistic integrating radiometer was built to measure the total output energy of the flash tube. The electrical input power to the flash tube was measured and compared to the model. These experiments were used to support the computed power input to the toner surface. Unfused prints were exposed to a multitude of pulse shapes, pulse widths, and energies. A standard adhesion test was used to measure the degree of fusing. The temperature of the toner/paper interface was computed. The toner had significant porosity and its heat capacity varied greatly with temperature. The adsorbed water in the paper influenced the temperature profile. The experiments confirmed the melting model. The degree of fusing correlated well with computed interface temperature, and not with input energy or surface temperature. Toner porosity and flash pulse shape are potential design parameters, and they were studied in detail. Modelling results indicate that modest reductions in porosity can significantly

  8. Foundation Flash CS5 for Designers

    CERN Document Server

    Green, T

    2010-01-01

    Flash is one of the most engaging, innovative, and versatile technologies available - allowing the creation of anything from animated banners and simple cartoons to Rich Internet Applications, interactive videos, and dynamic user interfaces for web sites, kiosks, devices, or DVDs. The possibilities are endless, and now it just got better. Flash CS5 boasts a host of new features, including better support for mobile devices, a whole new animation engine enabling full manipulation of tweens and paths, custom easing, improved inverse kinematics, a revamped timeline, built-in 3D, and much more. Thi

  9. 3D Flash LIDAR Space Laser, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business that has developed 3D Flash LIDAR systems for space and terrestrial applications. 3D Flash LIDAR is...

  10. 3D Flash LIDAR EDL Resolution Improvement, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business that has developed 3D Flash LIDAR systems for space and terrestrial applications. 3D Flash LIDAR is...

  11. Comparative Study of Furnace and Flash Lamp Annealed Silicon Thin Films Grown by Plasma Enhanced Chemical Vapor Deposition

    Directory of Open Access Journals (Sweden)

    Maheshwar Shrestha

    2018-03-01

    Full Text Available Low-temperature growth of microcrystalline silicon (mc-Si is attractive for many optoelectronic device applications. This paper reports a detailed comparison of optical properties, microstructure, and morphology of amorphous silicon (a-Si thin films crystallized by furnace annealing and flash lamp annealing (FLA at temperatures below the softening point of glass substrate. The initial a-Si films were grown by plasma enhanced chemical vapor deposition (PECVD. Reflectance measurement indicated characteristic peak in the UV region ~280 nm for the furnace annealed (>550 °C and flash lamp annealed films, which provided evidence of crystallization. The film surface roughness increased with increasing the annealing temperature as well as after the flash lamp annealing. X-ray diffraction (XRD measurement indicated that the as-deposited samples were purely amorphous and after furnace crystallization, the crystallites tended to align in one single direction (202 with uniform size that increased with the annealing temperature. On the other hand, the flash lamp crystalized films had randomly oriented crystallites with different sizes. Raman spectroscopy showed the crystalline volume fraction of 23.5%, 47.3%, and 61.3% for the samples annealed at 550 °C, 650 °C, and with flash lamp, respectively. The flash lamp annealed film was better crystallized with rougher surface compared to furnace annealed ones.

  12. Venlafaxine hydrochloride for the treatment of hot flashes.

    Science.gov (United States)

    Schober, Christina E; Ansani, Nicole T

    2003-11-01

    To review the literature evaluating venlafaxine for the treatment of hot flashes. Clinical literature accessed through MEDLINE (1966-August 2002), PubMed, Harrison's Online, and references of reviewed articles. Key terms used were venlafaxine, Effexor, hot flashes, and vasomotor symptoms. Not all patients experiencing hot flashes are candidates for traditional hormonal therapy. Nonhormonal alternatives have long been explored, but conflicting evidence of efficacy exists. Venlafaxine is an effective nonhormonal alternative for relief from uncontrolled hot flashes.

  13. Measuring the electron bunch timing with femtosecond resolution at FLASH

    International Nuclear Information System (INIS)

    Bock, Marie Kristin

    2013-03-01

    Bunch arrival time monitors (BAMs) are an integral part of the laser-based synchronisation system which is being developed at the Free Electron Laser in Hamburg (FLASH).The operation principle comprises the measurement of the electron bunch arrival time relative to the optical timing reference, which is provided by actively length-stabilised fibre-links of the synchronisation system. The monitors are foreseen to be used as a standard diagnostic tool, not only for FLASH but also for the future European X-Ray Free-Electron Laser (European XFEL). The present bunch arrival time monitors have evolved from proof-of-principle experiments to beneficial diagnostic devices, which are almost permanently available during standard machine operation. This achievement has been a major objective of this thesis. The developments went in parallel to improvements in the reliable and low-maintenance operation of the optical synchronisation system. The key topics of this thesis comprised the characterisation and optimisation of the opto-mechanical front-ends of both, the fibre-links and the BAMs. The extent of applications involving the bunch arrival time information has been enlarged, providing automated measurements for properties of the RF acceleration modules, for instance, the RF on-crest phase determination and the measurement of energy fluctuations. Furthermore, two of the currently installed BAMs are implemented in an active phase and gradient stabilisation of specific modules in order to minimise the arrival time jitter of the electron bunches at the location of the FEL undulators, which is crucial for a high timing resolution of pump-probe experiments.

  14. Measuring the electron bunch timing with femtosecond resolution at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Bock, Marie Kristin

    2013-03-15

    Bunch arrival time monitors (BAMs) are an integral part of the laser-based synchronisation system which is being developed at the Free Electron Laser in Hamburg (FLASH).The operation principle comprises the measurement of the electron bunch arrival time relative to the optical timing reference, which is provided by actively length-stabilised fibre-links of the synchronisation system. The monitors are foreseen to be used as a standard diagnostic tool, not only for FLASH but also for the future European X-Ray Free-Electron Laser (European XFEL). The present bunch arrival time monitors have evolved from proof-of-principle experiments to beneficial diagnostic devices, which are almost permanently available during standard machine operation. This achievement has been a major objective of this thesis. The developments went in parallel to improvements in the reliable and low-maintenance operation of the optical synchronisation system. The key topics of this thesis comprised the characterisation and optimisation of the opto-mechanical front-ends of both, the fibre-links and the BAMs. The extent of applications involving the bunch arrival time information has been enlarged, providing automated measurements for properties of the RF acceleration modules, for instance, the RF on-crest phase determination and the measurement of energy fluctuations. Furthermore, two of the currently installed BAMs are implemented in an active phase and gradient stabilisation of specific modules in order to minimise the arrival time jitter of the electron bunches at the location of the FEL undulators, which is crucial for a high timing resolution of pump-probe experiments.

  15. Decision support system for road closures in flash flood emergencies.

    Science.gov (United States)

    2013-06-01

    Among all the natural hazards, flash flood ranks as the No. 1 weather-related killer in U.S. More : than half of the deaths in flash flood are due to drowning victims in a traffic environment. So road : closure is critical to save lives from flash fl...

  16. Flash-Aware Page Replacement Algorithm

    Directory of Open Access Journals (Sweden)

    Guangxia Xu

    2014-01-01

    Full Text Available Due to the limited main memory resource of consumer electronics equipped with NAND flash memory as storage device, an efficient page replacement algorithm called FAPRA is proposed for NAND flash memory in the light of its inherent characteristics. FAPRA introduces an efficient victim page selection scheme taking into account the benefit-to-cost ratio for evicting each victim page candidate and the combined recency and frequency value, as well as the erase count of the block to which each page belongs. Since the dirty victim page often contains clean data that exist in both the main memory and the NAND flash memory based storage device, FAPRA only writes the dirty data within the victim page back to the NAND flash memory based storage device in order to reduce the redundant write operations. We conduct a series of trace-driven simulations and experimental results show that our proposed FAPRA algorithm outperforms the state-of-the-art algorithms in terms of page hit ratio, the number of write operations, runtime, and the degree of wear leveling.

  17. Mathematical modeling of the flash converting process

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, H.Y.; Perez-Tello, M.; Riihilahti, K.M. [Utah Univ., Salt Lake City, UT (United States)

    1996-12-31

    An axisymmetric mathematical model for the Kennecott-Outokumpu flash converting process for converting solid copper matte to copper is presented. The model is an adaptation of the comprehensive mathematical model formerly developed at the University of Utah for the flash smelting of copper concentrates. The model incorporates the transport of momentum, heat, mass, and reaction kinetics between gas and particles in a particle-laden turbulent gas jet. The standard k-{epsilon} model is used to describe gas-phase turbulence in an Eulerian framework. The particle-phase is treated from a Lagrangian viewpoint which is coupled to the gas-phase via the source terms in the Eulerian gas-phase governing equations. Matte particles were represented as Cu{sub 2}S yFeS, and assumed to undergo homogeneous oxidation to Cu{sub 2}O, Fe{sub 3}O{sub 4}, and SO{sub 2}. A reaction kinetics mechanism involving both external mass transfer of oxygen gas to the particle surface and diffusion of oxygen through the porous oxide layer is proposed to estimate the particle oxidation rate Predictions of the mathematical model were compared with the experimental data collected in a bench-scale flash converting facility. Good agreement between the model predictions and the measurements was obtained. The model was used to study the effect of different gas-injection configurations on the overall fluid dynamics in a commercial size flash converting shaft. (author)

  18. Ultra-Fast Flash Observatory: Fast Response Space Missions for Early Time Phase of Gamma Ray Bursts

    DEFF Research Database (Denmark)

    Park, I.H.; Ahmad, S.; Barrillon, P.

    2013-01-01

    One of the unexplored domains in the study of gamma-ray bursts (GRBs) is the early time phase of the optical light curve. We have proposed Ultra-Fast Flash Observatory (UFFO) to address this question through extraordinary opportunities presented by a series of small space missions. The UFFO is eq...

  19. Tailor-made micro-object optical sensor based on mesoporous pellets for visual monitoring and removal of toxic metal ions from aqueous media.

    Science.gov (United States)

    El-Safty, Sherif A; Shenashen, M A; Shahat, A

    2013-07-08

    Methods for the continuous monitoring and removal of ultra-trace levels of toxic inorganic species (e.g., mercury, copper, and cadmium ions) from aqueous media such as drinking water and biological fluids are essential. In this paper, the design and engineering of a simple, pH-dependent, micro-object optical sensor is described based on mesoporous aluminosilica pellets with an adsorbed dressing receptor (a porphyrinic chelating ligand). This tailor-made optical sensor permits ultra-fast (≤ 60 s), specific, pH-dependent visualization and removal of Cu(2+) , Cd(2+) , and Hg(2+) at sub-picomolar concentrations (∼10(-11) mol dm(-3) ) from aqueous media, including drinking water and a suspension of red blood cells. The acidic active acid sites of the pellets consist of heteroatoms arranged around uniformly shaped pores in 3D nanoscale gyroidal mesostructures densely coated with the chelating ligand. The sensor can be used in batch mode, as well as in a flow-through system in which sampling, target ion recognition and removal, and analysis are integrated in a highly automated and efficient manner. Because the pellets exhibit long-term stability, reproducibility, and versatility over a number of analysis/regeneration cycles, they can be expected to be useful for the fabrication of inexpensive sensor devices for naked-eye detection of toxic pollutants. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Optical nanosphere sensor based on shell-by-shell fabrication for removal of toxic metals from human blood.

    Science.gov (United States)

    El-Safty, S A; Abdellatef, S; Ismael, M; Shahat, A

    2013-06-01

    Because toxic heavy metals tend to bioaccumulate, they represent a substantial human health hazard. Various methods are used to identify and quantify toxic metals in biological tissues and environment fluids, but a simple, rapid, and inexpensive system has yet to be developed. To reduce the necessity for instrument-dependent analysis, we developed a single, pH-dependent, nanosphere (NS) sensor for naked-eye detection and removal of toxic metal ions from drinking water and physiological systems (i.e., blood). The design platform for the optical NS sensor is composed of double mesoporous core-shell silica NSs fabricated by one-pot, template-guided synthesis with anionic surfactant. The dense shell-by-shell NS construction generated a unique hierarchical NS sensor with a hollow cage interior to enable accessibility for continuous monitoring of several different toxic metal ions and efficient multi-ion sensing and removal capabilities with respect to reversibility, longevity, selectivity, and signal stability. Here, we examined the application of the NS sensor for the removal of toxic metals (e.g., lead ions from a physiological system, such as human blood). The findings show that this sensor design has potential for the rapid screening of blood lead levels so that the effects of lead toxicity can be avoided. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. 4-(2-Pyridylazo)-resorcinol Functionalized Thermosensitive Ionic Microgels for Optical Detection of Heavy Metal Ions at Nanomolar Level.

    Science.gov (United States)

    Zhou, Xianjing; Nie, Jingjing; Du, Binyang

    2015-10-07

    4-(2-Pyridylazo)-resorcinol (PAR) functionalized thermosensitive ionic microgels (PAR-MG) were synthesized by a one-pot quaternization method. The PAR-MG microgels were spherical in shape with radius of ca. 166.0 nm and narrow size distribution and exhibited thermo-sensitivity in aqueous solution. The PAR-MG microgels could optically detect trace heavy metal ions, such as Cu(2+), Mn(2+), Pb(2+), Zn(2+), and Ni(2+), in aqueous solutions with high selectivity and sensitivity. The PAR-MG microgel suspensions exhibited characteristic color with the presence of various trace heavy metal ions, which could be visually distinguished by naked eyes. The limit of colorimetric detection (DL) was determined to be 38 nM for Cu(2+) at pH 3, 12 nM for Cu(2+) at pH 7, and 14, 79, 20, and 21 nM for Mn(2+), Pb(2+), Zn(2+), and Ni(2+), respectively, at pH 11, which was lower than (or close to) the United States Environmental Protection Agency standard for the safety limit of these heavy metal ions in drinking water. The mechanism of detection was attributed to the chelation between the nitrogen atoms and o-hydroxyl groups of PAR within the microgels and heavy metal ions.

  2. Optical detection/collection of toxic Cd(II) ions using cubic Ia3d aluminosilica mesocage sensors.

    Science.gov (United States)

    El-Safty, Sherif A; Shenashen, Mohamed A; Khairy, Mohamed

    2012-08-30

    Optical sensors for selective removal and detection of extremely toxic ions such as cadmium (Cd(II)) in aquatic samples were successfully fabricated via simple strategy. Aluminosilica-based network platforms are used as selective mesopore shape and size carriers in order to fabricate optical sensors through the direct functionalization of α, β, γ, and δ-tetrakis(1-methylpyridinium-4-yl)porphine ρ-toluenesulfonate (TMPyP) moieties without any prior surface modification using silane or thiol agents. In turn, the key advantage of a heretical three-dimensional (3D) cubic Ia3d mesocage is the facile access of target ions such as ion transports and the high affinity responses of TMPyP receptor-Cd(II) analyte binding events, which result in the easy generation and transduction of optical signals even at the trace level of the Cd(II) ion. The optical sensor design-based aluminosilica cages enable the sensitive detection and selective removal of Cd(II) ions even at ultra-trace concentrations of 10(-10)mol/dm(3) with rapid response time (in minutes). This rational strategy is crucial to the development of optical mesocollectors (i.e., probe surface-mounted naked-eye ion-sensor strips) with highly selective Cd(II) ion removal from aqueous water. These new classes of optical mesocollectors exhibit long-term stability and reusability of deleterious Cd(II) ions, which makes them efficient for various analytical applications. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. Initial electric field changes of lightning flashes in two thunderstorms

    Science.gov (United States)

    Chapman, Ryan; Marshall, Thomas; Karunarathne, Sumedhe; Stolzenburg, Maribeth

    2017-04-01

    The beginning of all 75 lightning flashes in two small thunderstorms was investigated using an array of electric field change (E-change) meters and an array of VHF sensors with the goal of determining if an initial E-change (IEC) preceded the initial breakdown (IB) pulses in each flash. IECs were found at the beginning of all 62 flashes in Storm 1 and all 13 flashes in Storm 2. Hence, it is concluded that an IEC is a fundamental part of most or all lightning initiations and that an IEC is needed prior to the first IB pulse in a flash. IEC durations averaged 0.23 ms for cloud-to-ground (CG) flashes (range 0.08-0.54 ms) and averaged 2.7 ms for normal intracloud (IC) flashes (range 0.04-9.8 ms). IEC point dipole moments averaged 26 C m for CG flashes (range 4-86 C m) and averaged -140 C m for normal IC flashes (range -8 to -650 C m). IEC current moments averaged 120 kA m for CG flashes (range 41-410 kA m) and averaged -91 kA m for normal IC flashes (range -2 to -630 kA m). E-change data support the suggestion that weak narrow bipolar event type events initiate some lightning flashes, but 41 of the 75 flashes had no detectable initiating pulse > 0.04 V m-1 range normalized to 100 km. Two flashes had two IECs; the second IEC of each flash initiated a new lightning channel that propagated in a new direction and at a higher altitude than the original development after the first IEC.

  4. New Observational Evidence of Flash Mixing on the White Dwarf Cooling Curve

    Science.gov (United States)

    Brown, T. M.; Lanz, T.; Sweigart, A. V.; Cracraft, Misty; Hubeny, Ivan; Landsman, W. B.

    2011-01-01

    Blue hook stars are a class of subluminous extreme horizontal branch stars that were discovered in UV images of the massive globular clusters w Cen and NGC 2808. These stars occupy a region of the HR diagram that is unexplained by canonical stellar evolution theory. Using new theoretical evolutionary and atmospheric models, we have shown that the blue hook stars are very likely the progeny of stars that undergo extensive internal mixing during a late helium-core flash on the white dwarf cooling curve. This "flash mixing" produces hotter-than-normal EHB stars with atmospheres significantly enhanced in helium and carbon. The larger bolometric correction, combined with the decrease in hydrogen opacity, makes these stars appear sub luminous in the optical and UV. Flash mixing is more likely to occur in stars born with a high helium abundance, due to their lower mass at the main sequence turnoff. For this reason, the phenomenon is more common in those massive globular clusters that show evidence for secondary populations enhanced in helium. However, a high helium abundance does not, by itself, explain the presence of blue hook stars in massive globular clusters. Here, we present new observational evidence for flash mixing, using recent HST observations. These include UV color-magnitude diagrams of six massive globular clusters and far-UV spectroscopy of hot subdwarfs in one of these clusters (NGC 2808).

  5. Two-step flash light sintering process for crack-free inkjet-printed Ag films

    International Nuclear Information System (INIS)

    Park, Sung-Hyeon; Kim, Hak-Sung; Jang, Shin; Lee, Dong-Jun; Oh, Jehoon

    2013-01-01

    In this paper, a two-step flash light sintering process for inkjet-printed Ag films is investigated with the aim of improving the quality of sintered Ag films. The flash light sintering process is divided into two steps: a preheating step and a main sintering step. The preheating step is used to remove the organic binder without abrupt vaporization. The main sintering step is used to complete the necking connections among the silver nanoparticles and achieve high electrical conductivity. The process minimizes the damage on the polymer substrate and the interface between the sintered Ag film and polymer substrate. The electrical conductivity is calculated by measuring the resistance and cross-sectional area with an LCR meter and 3D optical profiler, respectively. It is found that the resistivity of the optimal flash light-sintered Ag films (36.32 nΩ m), which is 228.86% of that of bulk silver, is lower than that of thermally sintered ones (40.84 nΩ m). Additionally, the polyimide film used as the substrate is preserved with the inkjet-printed pattern shape during the flash light sintering process without delamination or defects. (paper)

  6. Flash Welding Control by Use of PWM Inverter Power Supply

    Science.gov (United States)

    Nagura, Kouki; Sato, Yukihiko; Yamamura, Naoki; Ishida, Muneaki

    The flash welding is characterized by the high quality, the high production efficiency and the large sectional area welding, and is used to weld rails and hot coils in shop welding mainly. In order to realize high accuracy and high response control of flash welding, the inverter technology has been applied to flash welding in this study. In this paper, a method of process control combined with inverter flash control and mechanical control is proposed. Experiment results of the proposed process control combined with inverter flash control and mechanical control are presented.

  7. Anatomy of successive helium-shell flashes: Stationary shell burning

    International Nuclear Information System (INIS)

    Sackmann, I.

    1980-01-01

    For successive helium-shell flashes, the amounts of helium and hydrogen burned were computed over the peak flash phase, over the total flash cycle, and over the quiet, interflash phase. It was found that the frequently made assumption of stationary shell burning is violated by the helium-shell flash for the first few flashes; here, over a total flash cycle, the helium-burning shell always progresses considerably faster outward than the hydrogen-burning shell. However, after about 15 flashes, coincident with the leveling out of the peaks of the helium shell, agreement with stationary shell burning is attained, both for the 3 M/sub sun/ and 6 M/sub sun/ cases

  8. Evaluation of Fluoxtinfor Treatm Ent of Menopausal Hot Flashes

    Directory of Open Access Journals (Sweden)

    L Sakhavat

    2004-10-01

    Full Text Available Introduction: Hot flashes can be prominent problem in menopausal women. The treatment of hot flashes is hormonal thrapies but in some patients that are unable to use estrogen other treating hot flashes are required. Based on anecdotal information reqarding the efficacy of fluoxtin for treating hot flashes , the present trial was developed . Methods: This trial used a double Blinded randomized to study the effecacy of fluoxetin (20mg/day and comparing with placebo in treating hot flash in 4 week treatment. Results: 310 women began protocol thrapy. in two group: A (flouxetine and B-( placebo By the end of protocol hot flashes frequeney decreased 77.5 % with floxetin versus 13.7 % whith placebo( p=.0001The flouxetin was well tolerated . Conclusion: Flouxetin resulted well improvent in hot flashes.

  9. Visual sensing of fluoride ions by dipyrrolyl derivatives bearing

    Indian Academy of Sciences (India)

    withdrawing quinone or dicyano functionalities in their architecture permit the detection of fluoride ions under visual (naked-eye) as well as optical (absorption and fluorescence) and electrochemical conditions in organic solvents.

  10. Visual sensing of fluoride ions by dipyrrolyl derivatives bearing ...

    Indian Academy of Sciences (India)

    withdrawing quinone or dicyano functionalities in their architecture permit the detection of fluoride ions under visual (naked-eye) as well as optical (absorption and fluorescence) and electrochemical conditions in organic solvents.

  11. Electrical Safety and Arc Flash Protections

    Energy Technology Data Exchange (ETDEWEB)

    R. Camp

    2008-03-04

    Over the past four years, the Electrical Safety Program at PPPL has evolved in addressing changing regulatory requirements and lessons learned from accident events, particularly in regards to arc flash hazards and implementing NFPA 70E requirements. This presentation will discuss PPPL's approaches to the areas of electrical hazards evaluation, both shock and arc flash; engineered solutions for hazards mitigation such as remote racking of medium voltage breakers, operational changes for hazards avoidance, targeted personnel training and hazard appropriate personal protective equipment. Practical solutions for nominal voltage identification and zero voltage checks for lockout/tagout will also be covered. Finally, we will review the value of a comprehensive electrical drawing program, employee attitudes expressed as a personal safety work ethic, integrated safety management, and sustained management support for continuous safety improvement.

  12. Electrical Safety and Arc Flash Protections

    International Nuclear Information System (INIS)

    Camp, R.

    2008-01-01

    Over the past four years, the Electrical Safety Program at PPPL has evolved in addressing changing regulatory requirements and lessons learned from accident events, particularly in regards to arc flash hazards and implementing NFPA 70E requirements. This presentation will discuss PPPL's approaches to the areas of electrical hazards evaluation, both shock and arc flash; engineered solutions for hazards mitigation such as remote racking of medium voltage breakers, operational changes for hazards avoidance, targeted personnel training and hazard appropriate personal protective equipment. Practical solutions for nominal voltage identification and zero voltage checks for lockout/tagout will also be covered. Finally, we will review the value of a comprehensive electrical drawing program, employee attitudes expressed as a personal safety work ethic, integrated safety management, and sustained management support for continuous safety improvement.

  13. Flash evaporation of liquid monomer particle mixture

    Science.gov (United States)

    Affinito, John D.; Darab, John G.; Gross, Mark E.

    1999-01-01

    The present invention is a method of making a first solid composite polymer layer. The method has the steps of (a) mixing a liquid monomer with particles substantially insoluble in the liquid monomer forming a monomer particle mixture; (b) flash evaporating the particle mixture and forming a composite vapor; and (c) continuously cryocondensing said composite vapor on a cool substrate and cross-linking the cryocondensed film thereby forming the polymer layer.

  14. Mass flow determination in flashing openings

    OpenAIRE

    G Polanco; A Holdø; G Munday

    2016-01-01

    The output flow characteristics in most of the industrial accidental releasesare related to a two-phase flow and their represent a potential hazard tofacilities, personnel, equipments and environment. If these releases involvesuperheated liquid then a flashing process can take place, where a liquidgasmixture due to the breaking of the metastable state can significantlyaffect the hazard zone. The calculation of the conditions for the flow after aflashing opening is very relevant in order to un...

  15. Evaluation of Flash Bainite in 4130 Steel

    Science.gov (United States)

    2011-07-01

    and Gleeble heat affected zone tests were performed on AISI 4130 steel plate. When possible, testing was baselined against conventional quench and...Diffraction Report 34 APPENDIX F Charpy V-Notch Test Results on Flash Bainite and Q&T 4130 Plate 38 APPENDIX G Charpy V-Notch Test Results on Gleeble...provides recommendations for future testing . EXPERIMENTAL PROCEDURE Gary Cola, Sirius Protection LLC, provided 4130 steel plates to ARDEC. Both

  16. ADVANCES OF FLASH LIDAR DEVELOPMENT ONBOARD UAV

    Directory of Open Access Journals (Sweden)

    G. Zhou

    2012-07-01

    Full Text Available A small cost-low civilian UAV (Unmanned Aerial Vehicle - UAV platform usually requests that all carried components should be light in weight, small in volume, and efficient in energy. This paper presents the advance of a pre-mature of flash LiDAR system including laser emitting system, associate with the pulsed voltage technology. A complete laser emitting system, including laser diode, conic lens, alignment, divergence angle, etc., has been designed and implemented. The laser emitting system is first simulated and tested using 3D-Tool software, and then manufactured by an industrial company. In addition, a novel power supply topology based on two coupled coils, pulse generator circuit, and a fast switch, is proposed since several 100 V in voltage, 10-100 A in current, several hundred millisecond in pulse width is needed for flash LiDAR system onboard a small low-cost civilian UAV platform, and the traditional power supply had problems in efficiency and bulk. Finally, laser emitting and the power supply are assembled and tested. The size of laser footprint is 4398.031 mm x 4398.031 mm in x and y axes, respectively, when shitting from a flight height of 300 m, which is close to the theoretic size of 4.5 m x 4.5 m. The difference of 102 mm can meet the requirement of flash LiDAR data collection at a flight height of 300 m. Future work on extensive and on-going investigation and investments for a prototype of flash LiDAR system is drawn up as well.

  17. Pressure drop in flashing flow through obstructions

    International Nuclear Information System (INIS)

    Weinle, M.E.; Johnston, B.S.

    1985-01-01

    An experiment was designed to investigate the pressure drop for flashing flow across obstructions of different geometries at various flow rates. Tests were run using two different orifices to determine if the two-phase pressure drop could be characterized by the single phase loss coefficient and the general behavior of the two-phase multiplier. For the geometries studied, it was possible to correlate the multiplier in a geometry-independent fashion

  18. Flash CS3 The Missing Manual

    CERN Document Server

    Grover, Chris

    2008-01-01

    Flash CS3, the latest version of the premier tool for creating web animations and interactive web sites, can be intimidating to learn. This entertaining reference tutorial provides a reader-friendly animation primer and a guided tour of all the program's tools and capabilities. Beginners will learn to use the software in no time, and experienced users will quickly take their skills to the next level.

  19. Green FLASH: energy efficient real-time control for AO

    Science.gov (United States)

    Gratadour, D.; Dipper, N.; Biasi, R.; Deneux, H.; Bernard, J.; Brule, J.; Dembet, R.; Doucet, N.; Ferreira, F.; Gendron, E.; Laine, M.; Perret, D.; Rousset, G.; Sevin, A.; Bitenc, U.; Geng, D.; Younger, E.; Andrighettoni, M.; Angerer, G.; Patauner, C.; Pescoller, D.; Porta, F.; Dufourcq, G.; Flaischer, A.; Leclere, J.-B.; Nai, A.; Palazzari, P.; Pretet, D.; Rouaud, C.

    2016-07-01

    The main goal of Green Flash is to design and build a prototype for a Real-Time Controller (RTC) targeting the European Extremely Large Telescope (E-ELT) Adaptive Optics (AO) instrumentation. The E-ELT is a 39m diameter telescope to see first light in the early 2020s. To build this critical component of the telescope operations, the astronomical community is facing technical challenges, emerging from the combination of high data transfer bandwidth, low latency and high throughput requirements, similar to the identified critical barriers on the road to Exascale. With Green Flash, we will propose technical solutions, assess these enabling technologies through prototyping and assemble a full scale demonstrator to be validated with a simulator and tested on sky. With this R&D program we aim at feeding the E-ELT AO systems preliminary design studies, led by the selected first-light instruments consortia, with technological validations supporting the designs of their RTC modules. Our strategy is based on a strong interaction between academic and industrial partners. Components specifications and system requirements are derived from the AO application. Industrial partners lead the development of enabling technologies aiming at innovative tailored solutions with potential wide application range. The academic partners provide the missing links in the ecosystem, targeting their application with mainstream solutions. This increases both the value and market opportunities of the developed products. A prototype harboring all the features is used to assess the performance. It also provides the proof of concept for a resilient modular solution to equip a large scale European scientific facility, while containing the development cost by providing opportunities for return on investment.

  20. Oil from coal by flash pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Smith, I.W. (and others)

    1985-12-01

    This report summarizes the final stage of the NERDDP-funded work on coal liquefaction by flash pyrolysis. A working model pyrolyser, simulating a full-scale unit, has been operated over extended periods with Liddell and Piercefield (NSW), Acland, Millmerran and Macalister (Qld), and Loy Yang (Vic) coals. For several of the coals pyrolysed process heat was generated by combustion of some of the by-product char. Tar from Millmerran, Piercefield, Loy Yang, and Yallourn coals, produced in a separate pilot-scale pyrolyser, have been hydrogenated in continuous reactors to produce synthetic crude oils. Chars from Millmerran and Macalister sub-bituminous coals have been burned in the pilot-scale furnace with results as satisfactory as for the parent coals. The report shows that the flash pyrolysis method of making oil from coal is technically feasible, but cost studies show that in the present economic environment this method produces oil some three to four times more costly than natural oil. The report includes a summary of the overall CSIRO project of which this project formed a part, with emphasis on recent work of significance: e.g. methods of control of coke lay-down on tar hydrogenation catalysts; the combustion reactivity of pyrolysis chars; and various alternative uses of the flash pyrolysis method. Also included is an outline of related work carried out in other Australian and overseas laboratories, and a complete (to end of 1985) bibliography of all publications arising from the project.

  1. Measurements of SIMCON 3.1 LLRF control signal processing quality for VUV free-electron laser FLASH

    Science.gov (United States)

    Pietrasik, Rafal; Giergusiewicz, Wojciech; Jalmuzna, Wojciech; Pozniak, Krzysztof T.; Romaniuk, Ryszard S.; Simrock, Stefan

    2006-10-01

    The paper describes development of a new version of photonic and electronic control and measurement system for FLASH Laser under development in DESY Hamburg accelerator laboratory. The system is called SIMCON 3.1. and is a developmental continuation of previous systems SIMCON 1.0, SIMCON 2.1 and SIMCON 3.0. It differs from the previous systems by considerably bigger resources: 10 fast analog input channels, bigger FPGA chip with two power PC - CPU units, two multi-gigabit optical links, GbE interface, booting possibility from flash memory card. The PCB is done in VME mechanical and electrical standard. It is designed for usage in tests for FLASH Laser development.

  2. Acupuncture for hot flashes in patients with prostate cancer.

    Science.gov (United States)

    Beer, Tomasz M; Benavides, Maria; Emmons, Sandra L; Hayes, Margaret; Liu, Guohui; Garzotto, Mark; Donovan, Deirdre; Katovic, Nina; Reeder, Caron; Eilers, Kristine

    2010-11-01

    To determine the effect of acupuncture on hot flash frequency and intensity, quality of life, and sleep quality in patients undergoing hormonal therapy for prostate cancer. Hot flashes are a common adverse effect of hormonal therapy for prostate cancer. Men who had a hot flash score > 4 who were receiving androgen deprivation therapy for prostate cancer underwent acupuncture with electrostimulation biweekly for 4 weeks, then weekly for 6 weeks, using a predefined treatment plan. The primary endpoint was a 50% reduction in the hot flash score after 4 weeks of therapy, calculated from the patients' daily hot flash diaries. The hot flash-related quality of life and sleep quality and biomarkers potentially related to hot flashes, including serotonin, calcitonin gene-related peptide, and urinary 5-hydroxyindoleacetic acid, were examined. A total of 25 men were enrolled from September 2003 to April 2007. Of these, 22 were eligible and evaluable. After 4 weeks, 9 (41%, 95% confidence interval 21%-64%) of 22 patients had had a > 50% reduction in the hot flash score. Of the 22 patients, 12 (55%, 95% confidence interval 32%-76%) met this response definition at any point during the therapy course. No patient had a significant increase in hot flash score during therapy. A reduced hot flash score was associated with improvement in the hot flash-related quality of life and sleep quality. Multiple placebo-controlled trials have demonstrated a 25% response rate to placebo treatment for hot flashes. Of the 22 patients, 41% had responded by week 4 and 55% overall in the present pilot study, providing evidence of a potentially meaningful benefit. Additional studies of acupuncture for hot flashes in this population are warranted. Copyright © 2010 Elsevier Inc. All rights reserved.

  3. Ground- and Space-based Observations of Horizontally-extensive Lightning Flashes

    Science.gov (United States)

    Zhang, D.; Cummins, K. L.; Bitzer, P. M.

    2017-12-01

    Horizontally-extensive lightning flashes occur frequently in association with mature and late phases of multicellular thunderstorms, both in trailing stratiform regions and horizontally-extensive anvils. The spatial relationship between these flashes and the parent cloud volume is of importance for space launch operational decision making, and is of broader scientific interest. Before this question can be accurately addressed, there is a need to understand the degree to which current lightning observation systems can depict the spatial extent of these long flashes. In this ongoing work, we will intercompare the depiction of horizontally-extensive flashes using several ground-based lightning locating systems (LLSs) located at Kennedy Space Center (KSC) with space-based observations observed by the recently-launched Geostationary Lightning Mapper (GLM) onboard the GOES-16 satellite. Ground-based datasets include the KSC Lightning Mapping Array (KSCLMA), the operational narrowband digital interferometer network MERLIN, and the combined cloud-to-ground and cloud lightning dataset produced by the U.S. National Lightning Detection Network (NLDN). The KSCLMA system is a network of VHF time-of-arrival sensors that preferentially report breakdown processes, and MERLIN is a network of VHF interferometers that point to the discharges in the horizontal plane. Observations to date indicate that MERLIN and the KSCSLMA provide similar overall descriptions of the spatial and temporal extent of these flashes, while the NLDN does not provide adequate spatial mapping of these flashes. The KSC LMA system has much better location accuracy, and provides excellent 3-dimensional representation within 100 km of KSC. It also has sufficient sensitivity to provide 2-dimensional flash mapping within 250 km of KSC. The MERLIN system provides a more-detailed representation of fast leader propagation (in 2 dimensions) with 100 km of KSC. Earlier work during the CHUVA campaign in Brazil with

  4. GeckoFTL: Scalable Flash Translation Techniques For Very Large Flash Devices

    DEFF Research Database (Denmark)

    Dayan, Niv; Bonnet, Philippe; Idreos, Stratos

    2016-01-01

    thereby harming performance and device lifetime. In this paper, we identify a key component of the metadata called the Page Validity Bitmap (PVB) as the bottleneck. PVB is used by the garbage-collectors of state-of-the-art FTLs to keep track of which physical pages in the device are invalid. PVB...... Gecko. Logarithmic Gecko is similar to an LSM-tree in that it first logs updates and later reorganizes them to ensure fast and scalable access time. Relative to the baseline of storing PVB in flash, Logarithmic Gecko enables cheaper updates at the cost of slightly more expensive garbage......-collection queries. We show that this is a good trade-off because (1) updates are intrinsically more frequent than garbage-collection queries to page validity metadata, and (2) flash writes are more expensive than flash reads. We demonstrate analytically and empirically through simulation that GeckoFTL achieves a 95...

  5. A Comparative Study of Reduced Variables Based Flash and Conventional Flash

    DEFF Research Database (Denmark)

    Michelsen, Michael Locht; Yan, Wei; Stenby, Erling Halfdan

    with a smaller set of independent variables. Various versions of the reduced variables methods have been proposed since the mid 80’s. The methods were first proposed for cubic equations of state (EoS) with zero binary interaction parameters (BIPs) and later generalized to situations with non-zero BIP matrices....... Most of the studies in the last decade suggest that the reduced variables methods are much more efficient than the conventional flash method. However, Haugen and Beckner questioned the advantages of the reduced variables methods in their recent paper (SPE 141399). A fair comparison between the reduced...... variables based flash and the conventional flash is not straightforward since the former is difficult to be formulated as unconstrained minimization and involves more complicated composition derivatives. With the recent formulations by Nichita and Graciaa (2010), it is possible to code the reduced variables...

  6. Investigations concerning the applicability of X-ray flash interference and laser technology to shock-induced solidification of organic liquids

    International Nuclear Information System (INIS)

    Krehl, Peter; Schaaffs, Werner

    By a dielectric discharge through a thin layer of liquid a hot plasma is created, which expands very fast and builds up around a compression ring of very highly compressed matter. X-ray flash interferences and laser light are applied to investigate the structure of the compression rings. To perform investigation of the fine structure, an X-ray flash machine was developed which permits to obtain with a single flash in less than 1μs Laue patterns of monocrystals, and Debye-Scherrer patterns of polycrystalline substances. The investigation of the compression rings in diverse substances by laser light resulted that the optical transparency and solidification is different in different regions of the compression ring. Therefore important hints for experiments with X-ray flash interferences were obtained

  7. Positive cloud-to-ground lightning flashes in severe storms

    Science.gov (United States)

    Rust, W. D.; Macgorman, D. R.; Arnold, R. T.

    1981-01-01

    The occurrence of cloud-to-ground flashes that effectively lower positive charge to earth (+CG flash) over flat terrain has been documented in the mature stage of severe thunderstorms. Of the 31 documented +CG flashes, most had only one return stroke. Zero-to-peak rise times for the strokes averaged 7 microsec. The +CG flashes averaged 520 ms in duration, with 25 percent lasting more than 800 ms. Many of these had field changes suggestive of continuing current. Positive flashes have been observed to emanate from several regions of severe storms: high on the back of the main storm tower, through the wall cloud, and from the downshear anvil. Visually most of these positive flashes have emanated from high in the storm, and acoustic mapping of two shows thunder sources to a height of about 15 km.

  8. Flash memories economic principles of performance, cost and reliability optimization

    CERN Document Server

    Richter, Detlev

    2014-01-01

    The subject of this book is to introduce a model-based quantitative performance indicator methodology applicable for performance, cost and reliability optimization of non-volatile memories. The complex example of flash memories is used to introduce and apply the methodology. It has been developed by the author based on an industrial 2-bit to 4-bit per cell flash development project. For the first time, design and cost aspects of 3D integration of flash memory are treated in this book. Cell, array, performance and reliability effects of flash memories are introduced and analyzed. Key performance parameters are derived to handle the flash complexity. A performance and array memory model is developed and a set of performance indicators characterizing architecture, cost and durability is defined.   Flash memories are selected to apply the Performance Indicator Methodology to quantify design and technology innovation. A graphical representation based on trend lines is introduced to support a requirement based pr...

  9. Onset conditions for flash sintering of UO2

    Science.gov (United States)

    Raftery, Alicia M.; Pereira da Silva, João Gustavo; Byler, Darrin D.; Andersson, David A.; Uberuaga, Blas P.; Stanek, Christopher R.; McClellan, Kenneth J.

    2017-09-01

    In this work, flash sintering was demonstrated on stoichiometric and non-stoichiometric uranium dioxide pellets at temperatures ranging from room temperature (26 °C) up to 600 °C . The onset conditions for flash sintering were determined for three stoichiometries (UO2.00, UO2.08, and UO2.16) and analyzed against an established thermal runaway model. The presence of excess oxygen was found to enhance the flash sintering onset behavior of uranium dioxide, lowering the field required to flash and shortening the time required for a flash to occur. The results from this study highlight the effect of stoichiometry on the flash sintering behavior of uranium dioxide and will serve as the foundation for future studies on this material.

  10. The echo-enabled harmonic generation options for FLASH II

    International Nuclear Information System (INIS)

    Deng, Haixiao; Decking, Winfried; Faatz, Bart

    2011-03-01

    FLASH II is an upgrade to the existing free electron laser (FEL) FLASH. The echo-enabled harmonic generation (EEHG) scheme is proposed to be a potential seeding option of FLASH II. In this paper, the possibility of EEHG operation of FLASH II is investigated for the first time. With a combination of existing numerical codes, i.e. a laser-beam interaction code in an undulator (LBICU), a beam tracking code in a chicane (ELEGANT) and an universal FEL simulating code (GENESIS), the effects of beam energy chirp and coherent synchrotron radiation (CSR) on EEHG operation are studied as well. In addition, several interesting issues concerning EEHG simulation are discussed. (orig.)

  11. Flash CS5.5 The Missing Manual

    CERN Document Server

    Grover, Chris

    2011-01-01

    You can build everything from simple animations to full-fledged iOS and Android apps with Flash CS5.5, but learning this complex program can be difficult-unless you have this fully updated, bestselling guide. Learn how to create gorgeous Flash effects even if you have no programming experience. With Flash CS5.5: The Missing Manual, you'll move from the basics to power-user tools with ease. Learn animation basics. Discover how to turn simple ideas into stunning animations.Master Flash's tools. Learn the animation and effects tools with clear explanations and hands-on examples.Use 3D effects. R

  12. Attribution of the rapid increase in flash droughts over China

    Science.gov (United States)

    Wang, Linying; Yuan, Xing

    2017-04-01

    Recently, a rapidly developing drought that is termed as "flash drought" occurs frequently in many regions across the world and has become a hot topic. The occurrence of flash drought is often triggered by heatwave and accompanied with low soil moisture and high evapotranspiration (ET). Due to its rapid onset and unusual intensity, the impact of flash drought can be devastating in some cases. Here, we investigate the long-term trend and variability of flash droughts over China based on pentad-mean surface air temperature observations from over two thousand meteorological stations as well as soil moisture and ET estimations from multiple global reanalysis products. Flash droughts are most likely to occur over humid and semi-humid regions in China. Flash drought events averaged over China have increased by 109% from 1979 to 2010, and the increase is mainly due to a long term warming of temperature (50%), followed by the contributions from decreasing soil moisture and increasing ET. To quantify the contributions of anthropogenic and/or natural drivers for flash drought, the Community Land Model version 4.5 (CLM4.5) is being forced by multiple climate models that participated in the Coupled Model Intercomparison Project Phase 5 to provide consistent soil moisture and ET data under different forcing scenarios, and an optimal fingerprinting detection method is being used to analyze the flash drought simulations. Preliminary results indicate that anthropogenic activities have exacerbated flash drought conditions over China in recent decades.

  13. Analisis dan Reduksi Bahaya ARC Flash pada Sistem Kelistrikan

    Directory of Open Access Journals (Sweden)

    Firman Aji Prasongko

    2012-09-01

    Full Text Available Upaya terakhir untuk menghitung bahaya yang berhubungan dengan potensi bahaya arc flash bergantung pada proteksi arus lebih untuk menghilangkan kondisi saat diberi gangguan. Efektivitas berbagai perangkat ditentukan oleh clearing time terkait dengan gangguan arus maksimum yang ada untuk setiap lokasi sistem. Industri komersial mulai melakukan prosedur pelabelan arc flash dan mulai mengenali pencegahan arc flash sebagai bagian dari program safety, perhitungan current method memungkinkan untuk menghitung incident energy (cal/cm² terkait dengan gangguan maksimum tiga phasa. Kesalahan terbanyak adalah besaran arus kurang dari besaran arus tiga phasa maksimum. Dalam Tugas Akhir ini akan dibahas perhitungan energy dan durasi lama terjadinya arc flash pada system kelistrikan pada electrical room.

  14. Microfocusing at the PG1 beamline at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Dziarzhytski, Siarhei, E-mail: siarhei.dziarzhytski@desy.de [DESY, Notkestrasse 85, 22067 Hamburg (Germany); Gerasimova, Natalia [European XFEL GmbH, Albert-Einstein-Ring 19, 22761 Hamburg (Germany); Goderich, Rene [University of South Florida (United States); Mey, Tobias [Laser Laboratorium Göttingen eV, Hans-Adolf-Krebs-Weg 1, 37077 Göttingen (Germany); Reininger, Ruben [Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 (United States); Rübhausen, Michael [University of Hamburg and Center for Free-Electron Laser Science, Notkestrasse 85, 22607 Hamburg (Germany); Siewert, Frank [Institute for Nanometre Optics and Technology at Helmholtz Zentrum Berlin/BESSY II, Albert-Einstein-Strasse 15, 12489 Berlin (Germany); Weigelt, Holger; Brenner, Günter [DESY, Notkestrasse 85, 22067 Hamburg (Germany)

    2016-01-01

    The Kirkpatrick–Baez (KB) refocusing mirrors unit at the PG1 beamline at FLASH has been newly designed, developed and fully commissioned. The vertical focal size of the KB optics is measured to be 5.8 ± 1 µm FWHM and the horizontal 6 ± 2 µm FWHM; astigmatism has been minimized to below 1 mm between waist positions. Such a tight focus is essential for the VUV double Raman spectrometer as it serves as an entrance slit for the first monochromator and defines its resolution to a very large extent. The Raman spectrometer is a permanent end-station at the PG1 beamline, dedicated to inelastic soft X-ray scattering experiments. The Kirkpatrick–Baez (KB) refocusing mirror system installed at the PG1 branch of the plane-grating monochromator beamline at the soft X-ray/XUV free-electron laser in Hamburg (FLASH) is designed to provide tight aberration-free focusing down to 4 µm × 6 µm full width at half-maximum (FWHM) on the sample. Such a focal spot size is mandatory to achieve ultimate resolution and to guarantee best performance of the vacuum-ultraviolet (VUV) off-axis parabolic double-monochromator Raman spectrometer permanently installed at the PG1 beamline as an experimental end-station. The vertical beam size on the sample of the Raman spectrometer, which operates without entrance slit, defines and limits the energy resolution of the instrument which has an unprecedented design value of 2 meV for photon energies below 70 eV and about 15 meV for higher energies up to 200 eV. In order to reach the designed focal spot size of 4 µm FWHM (vertically) and to hold the highest spectrometer resolution, special fully motorized in-vacuum manipulators for the KB mirror holders have been developed and the optics have been aligned employing wavefront-sensing techniques as well as ablative imprints analysis. Aberrations like astigmatism were minimized. In this article the design and layout of the KB mirror manipulators, the alignment procedure as well as microfocus

  15. Reproducible Design for the Optical Screening and Sensing of Hg(II Ions

    Directory of Open Access Journals (Sweden)

    Emad A. Elshehy

    2014-10-01

    Full Text Available We fabricated silica nanotubes with hexagonally ordered mesopores (6 nm inside a membrane disc with a uniform channel neck size of 200 nm and a longitudinal thickness of 60 μm to design an optical sensor membrane (OSM for the screening and sensing of extremely toxic Hg(II ions. The optical detection and quantitative recognition of Hg(II ions in water were conducted even at trace concentrations without the need for sophisticated instruments. The OSM design was based on the physical interaction of a responsive organic probe with silica pore surfaces followed by strong and selective binding Hg(II–probe interactions under specific sensing conditions, particularly at pH 5. Ultra-trace concentrations of Hg(II ions were easily detected with the naked eye using the OSM. The remarkable ion spectral response of Hg(II ion–OSM ensured the excellent quantification of the OSM for Hg(II ion sensing over a wide range of concentrations with a detection limit of 1.75 × 10−9 M. This result indicated that low concentrations of Hg(II ions can be detected with a high sensitivity. One of the key issues of OSM is the Hg(II ion-selective workability even in the presence of high doses of competitive matrices and species. The OSM design showed significant Hg(II ion-sensing capability despite the number of reuse/recycles using simple decomplexation. Given its high selectivity, fast response, and sensitivity, the OSM could be developed into a specific Hg(II ion-sensing kit in aqueous solutions.

  16. Helium Extraction from LNG End Flash

    OpenAIRE

    Kim, Donghoi

    2014-01-01

    Helium is an invaluable element as it is widely used in industry such as cryo-genics and welding due to its unique properties. However, helium shortage is expected in near future because of increasing demand and the anxiety of sup-ply. Consequently, helium production has attracted the attention of industry. The main source of He is natural gas and extracting it from LNG end-flash is considered as the most promising way of producing crude helium. Thus, many process suppliers have proposed proc...

  17. Determinants of Flash Flood Evacuation Choices and Assessment of Preferences for Flash Flood Warning Channels: The Case of Thailand

    OpenAIRE

    Kannika Thampanishvong

    2013-01-01

    The Southern part of Thailand, a region with tropical climate and monsoon, has often been affected by torrential rains caused by tropical storms, depressions, and typhoons. Such heavy rain is often accompanied by flash floods – sometimes occuring so suddenly and with an enormous amount of water – that make them particularly dangerous. Hence, flash flood warnings are important to prevent flash flood hazards from becoming disasters.These warnings can give individuals the much needed information...

  18. Optimization of an Optical Inspection System Based on the Taguchi Method for Quantitative Analysis of Point-of-Care Testing

    Directory of Open Access Journals (Sweden)

    Chia-Hsien Yeh

    2014-09-01

    Full Text Available This study presents an optical inspection system for detecting a commercial point-of-care testing product and a new detection model covering from qualitative to quantitative analysis. Human chorionic gonadotropin (hCG strips (cut-off value of the hCG commercial product is 25 mIU/mL were the detection target in our study. We used a complementary metal-oxide semiconductor (CMOS sensor to detect the colors of the test line and control line in the specific strips and to reduce the observation errors by the naked eye. To achieve better linearity between the grayscale and the concentration, and to decrease the standard deviation (increase the signal to noise ratio, S/N, the Taguchi method was used to find the optimal parameters for the optical inspection system. The pregnancy test used the principles of the lateral flow immunoassay, and the colors of the test and control line were caused by the gold nanoparticles. Because of the sandwich immunoassay model, the color of the gold nanoparticles in the test line was darkened by increasing the hCG concentration. As the results reveal, the S/N increased from 43.48 dB to 53.38 dB, and the hCG concentration detection increased from 6.25 to 50 mIU/mL with a standard deviation of less than 10%. With the optimal parameters to decrease the detection limit and to increase the linearity determined by the Taguchi method, the optical inspection system can be applied to various commercial rapid tests for the detection of ketamine, troponin I, and fatty acid binding protein (FABP.

  19. Case studies of selected Project "Flash" events

    Directory of Open Access Journals (Sweden)

    K. A. Nicolaides

    2009-03-01

    Full Text Available Flooding is a consequence of the prevailing meteorological situation, the intensity and duration of precipitation, geomorphology, human activities over a geographical region and other factors. Floods result in damage and destruction of infrastructure and private property and, in some cases, in fatalities. Flash floods are sudden and quite localized in extend, characterized by excessive amounts of rainfall within a short period of time and are distinguished from other floods by their degree of severity. The broader knowledge concerning flash floods is useful for the better understanding of the underlying thermodynamic and dynamic mechanisms, as well as the associated physical processes. The wider understanding of flashfloods can form part of an integrated system for short and very short forecasting of these events. In the present study, the synoptic, dynamic and thermodynamic conditions during the development of a baroclinic depression which affected the area of Cyprus on 6 November 2005 are studied. The depression was associated with extreme weather phenomena, such as thunderstorms, a water spout and high precipitation accumulations. The results indicate the importance of the dynamic parameters in the system's development and the thermodynamic analysis has shown the convective potential of the atmosphere.

  20. Flash pyrolysis fuel oil: BIO-POK

    Energy Technology Data Exchange (ETDEWEB)

    Gust, S. [Neste Oy, Porvoo (Finland)

    1995-12-31

    Flash pyrolysis oil from Ensyn Tech., Canada and Union Fenosa, Spain was combusted with simple pressure atomisation equipment commonly used with light fuel oils in intermediate size (0.1-1 MW) boilers. With a number of modifications to the combustion system, carbon monoxide (CO) and nitrous oxide (NO{sub x}) could be reduced to acceptable levels: CO < 30 ppm and NO{sub x} < 140 ppm. Particulate emissions which were initially very high (Bacharach 4-5) were reduced (Bach. 2-3) by system changes but are still higher than from light fuel oil (Bach. <1). The modifications to the combustion system were: acid resistant progressive cavity pump, higher oil preheat temperature and higher oil pressure than for light fuel oils, refractory section between burner and boiler warmed up to at least 800 deg C. In addition, it was necessary to store pyrolysis oil samples under inert conditions to prevent oxidation and to rinse nozzles with alcohol after shutdown to prevent coking. The complexity and cost of these system modifications are considered to be too great for current grades of flash pyrolysis oil to be sold as a light fuel oil replacement. Improvements to fuel quality will be necessary. The main improvements are lowering of viscosity and improving of stability

  1. Flash Infrared Thermography Contrast Data Analysis Technique

    Science.gov (United States)

    Koshti, Ajay

    2014-01-01

    This paper provides information on an IR Contrast technique that involves extracting normalized contrast versus time evolutions from the flash thermography inspection infrared video data. The analysis calculates thermal measurement features from the contrast evolution. In addition, simulation of the contrast evolution is achieved through calibration on measured contrast evolutions from many flat-bottom holes in the subject material. The measurement features and the contrast simulation are used to evaluate flash thermography data in order to characterize delamination-like anomalies. The thermal measurement features relate to the anomaly characteristics. The contrast evolution simulation is matched to the measured contrast evolution over an anomaly to provide an assessment of the anomaly depth and width which correspond to the depth and diameter of the equivalent flat-bottom hole (EFBH) similar to that used as input to the simulation. A similar analysis, in terms of diameter and depth of an equivalent uniform gap (EUG) providing a best match with the measured contrast evolution, is also provided. An edge detection technique called the half-max is used to measure width and length of the anomaly. Results of the half-max width and the EFBH/EUG diameter are compared to evaluate the anomaly. The information provided here is geared towards explaining the IR Contrast technique. Results from a limited amount of validation data on reinforced carbon-carbon (RCC) hardware are included in this paper.

  2. Nanocrystalline magnetic materials obtained by flash annealing

    Directory of Open Access Journals (Sweden)

    Murakami R.K.

    1999-01-01

    Full Text Available The aim of the present work was to produce enhanced-remanence nanocrystalline magnetic material by crystallizing amorphous or partially amorphous Pr4.5Fe77B18.5 alloys by the flash annealing process, also known as the dc-Joule heating process, and to determine the optimal conditions for obtaining good magnetic coupling between the magnetic phases present in this material. Ribbons of Pr4.5Fe77B18.5 were produced by melt spinning and then annealed for 10-30 s at temperatures 500 - 640 °C by passing current through the sample to develop the enhanced-remanence nanocrystalline magnetic material. These materials were studied by X-ray diffraction, differential thermal analysis and magnetic measurements. Coercivity increases of up to 15% were systematically observed in relation to furnace-annealed material. Two different samples were carefully examined: (i a sample annealed at 600 °C which showed the highest coercive field Hc and remanence ratio Mr/Ms and (ii a sample annealed at 520 °C which showed phase separation in the second quadrant demagnetization curve. Our results are in agreement with other studies which show that flash annealing improves the magnetic properties of some amorphous ferromagnetic ribbons.

  3. Modelling of flash pyrolysis of a single wood particle.

    NARCIS (Netherlands)

    Janse, A.M.C.; Janse, A.M.C.; Westerhout, R.W.J.; Westerhout, R.W.J.; Prins, W.

    2000-01-01

    Reactors for flash pyrolysis of biomass are designed to maximize the yield of bio-oil, at the expense of the by-products gas and char. To understand which chemical and physical factors influence the yield to bio-oil, the flash pyrolysis of a cylindrical wood particle with a maximum diameter of 1000

  4. Inserting a Flash movie into a PowerPoint presentation.

    Science.gov (United States)

    Elfarssi, Saïd

    2007-02-01

    Macromedia Flash is a multimedia authoring software that is used to create dynamic presentations for the World Wide Web. Flash allows you to mix sound, animation, and graphics into a single file that can be added to a PowerPoint presentation for dynamic effect.

  5. Microstructure of wood charcoal prepared by flash heating

    NARCIS (Netherlands)

    Kurosaki, F; Ishimaru, K; Hata, T; Bronsveld, P; Kobayashi, E; Imamura, Y

    2003-01-01

    Carbonized wood prepared by flash heating at 800 degreesC for I h shows a different microstructure and surface chemical structure than char formed after slow heating at 4 degreesC/min to 800 degreesC for I h. Flash heating produces pores that are surrounded by aggregates of carbon structures 25 to

  6. Flash radiographic technique applied to fuel injector sprays

    International Nuclear Information System (INIS)

    Vantine, H.C.

    1977-01-01

    A flash radiographic technique, using 50 ns exposure times, was used to study the pattern and density distribution of a fuel injector spray. The experimental apparatus and method are described. An 85 kVp flash x-ray generator, designed and fabricated at the Lawrence Livermore Laboratory, is utilized. Radiographic images, recorded on standard x-ray films, are digitized and computer processed

  7. Hot flashes: a review of pathophysiology and treatment modalities.

    Science.gov (United States)

    Morrow, Phuong Khanh H; Mattair, Danielle N; Hortobagyi, Gabriel N

    2011-01-01

    Many therapies are being studied for the treatment of hot flashes for individuals with cancer, yet few studies have demonstrated safe and effective clinical benefit for those who suffer from this distressing symptom. The purpose of this paper is to assess the current options for the management of hot flashes, examining key endpoints from recent clinical trials and reviewing future directions. Hot flashes are a common stressful symptom for individuals with cancer, particularly women with a history of breast cancer and men with prostate cancer. Lifestyle modifications are proposed as the first step in the management of less severe hot flashes. Several publications have addressed nonhormonal agents as a treatment option for hot flashes. Newer antidepressant and anticonvulsant agents have been studied and show potential in treating vasomotor symptoms. Although many complementary and alternative therapies, including herbal medications and phytoestrogens, have been studied for the treatment of hot flashes, none are clinically recommended at this time. Additionally, further evidence is needed for supportive exercise such as yoga and relaxation techniques. Acupuncture may warrant further investigation in the reduction and severity of hot flashes in both men and women. Hormonal therapies, including estrogens and progestogens, are the most well-known and efficient agents in alleviating hot flashes; however, the safety of these agents is disputable.

  8. Assessment of vulnerability to extreme flash floods in design storms.

    Science.gov (United States)

    Kim, Eung Seok; Choi, Hyun Il

    2011-07-01

    There has been an increase in the occurrence of sudden local flooding of great volume and short duration caused by heavy or excessive rainfall intensity over a small area, which presents the greatest potential danger threat to the natural environment, human life, public health and property, etc. Such flash floods have rapid runoff and debris flow that rises quickly with little or no advance warning to prevent flood damage. This study develops a flash flood index through the average of the same scale relative severity factors quantifying characteristics of hydrographs generated from a rainfall-runoff model for the long-term observed rainfall data in a small ungauged study basin, and presents regression equations between rainfall characteristics and the flash flood index. The aim of this study is to develop flash flood index-duration-frequency relation curves by combining the rainfall intensity-duration-frequency relation and the flash flood index from probability rainfall data in order to evaluate vulnerability to extreme flash floods in design storms. This study is an initial effort to quantify the flash flood severity of design storms for both existing and planned flood control facilities to cope with residual flood risks due to extreme flash floods that have ocurred frequently in recent years.

  9. Estimate Of Positive Ground Lightning Flashes In Ibadan, Nigeria ...

    African Journals Online (AJOL)

    Positive ground lightning flashes have been monitored for a period of one year in Ibadan, Nigeria. The instrument used was lightning flash counter designed to isolate only positive lightning discharges at average radiation field change of 5.0 v/m and peak frequency response of 17.0kHz with 3dB attenuation and effective ...

  10. Experimental Study on Light Flash Radiant Intensity Generated by Strong Shock 2A12 Aluminum Plate

    Science.gov (United States)

    Tang, Enling; Zhang, Lijiao; Zhang, Qingming; Shi, Xiaohan; Wang, Meng; Wang, Di; Xiang, Shenghai; Xia, Jin; Han, Yafei; Xu, Mingyang; Wu, Jin; Zhang, Shuang; Yuan, Jianfei

    2015-07-01

    In order to study the light flash radiant intensity produced by strong shock on a 2A12 aluminum target at the same projectile incidence angles and different shock velocities, experimental measurements were conducted for light flash phenomena of a 2A12 aluminum projectile impacting a 2A12 aluminum target under the conditions of different impact velocity and the same projectile incidence angles of 45° by using an optical pyrometer measurement system and a two-stage light gas gun loading system. Experimental results show that the peak values of the light flash radiant intensity for the wavelength of 550 nm are largest in the wavelength ranges of 600 nm, 650 nm and 700 nm when a 2A12 aluminum projectile impacts a double-layer 2A12 aluminum plate in the present experimental conditions. supported by National Natural Science Foundation of China (Nos. 10972145, 11272218, 11472178), State Key Program of National Natural Science of China (No. 11032003), Program for Liaoning Excellent Talents in University, China (No. LR2013008)

  11. Characteristics of lightning flashes generating sprites above storms

    Directory of Open Access Journals (Sweden)

    Soula Serge

    2016-01-01

    Full Text Available Sprites are Transient Luminous Events (TLEs that can extend vertically from 40 to 90 km and horizontally over several tens of km to form clusters of individual or multiple column or/and carrot-shaped luminous elements. They can even extend over more than 100 km in the form of sequential luminous emissions that are called “dancing sprites”. Their optical detection and other parameters describing the storm and the lightning activity associated allow us to understand the conditions of their production and their links with the lightning activity. Our observations confirm some characteristics of the sprites and put forward others: (i the sprites are essentially produced above the stratiform region of the Mesoscale Convective Systems after positive cloud-to-ground lightning flashes that produce large Charge Moment Change (CMC, with a shorter delay if the impulsive CMC (iCMC is larger. (ii The dancing sprites reflect the timing and the location of the successive lightning strokes that generate them. (iii The sprite elements can be shifted from the stroke location when their delay is large. (iv Bright sprites produce current signatures in ELF radiation a few milliseconds (<5 ms after the positive strokes that generate them.

  12. Corrosion testing in flash tanks of kraft pulp mills

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, S.J.; Stead, N.J.

    1999-11-01

    The corrosion observed in the first flash tanks in kraft pulp mills with modified cooking practices was characterized. Coupons of carbon steel (CS), several stainless steels (SS), and Ti were exposed at two mills. At one mill, identical sets of coupons were exposed in the No. 1 and No. 2 flash tank. At the other mill, three identical sets of coupons were placed in flash tank No. 1. The results of the exposures showed that both CS and Ti suffered high rates of general corrosion, while the SS suffered varying degrees of localized attack. The ranking of the corrosion resistance in the flash tank was the same that would be expected in a reducing acid environment. Attack by organic acids was concluded to be the most likely cause of corrosion of the flash tanks.

  13. FPGA-based implementation of a cavity field controller for FLASH and X-FEL

    Science.gov (United States)

    Fafara, Przemyslaw; Jalmuzna, Wojciech; Koprek, Waldemar; Pozniak, Krzysztof; Romaniuk, Ryszard; Szewinski, Jaroslaw; Cichalewski, Wojciech

    2007-08-01

    The subject of this paper is the design and construction of a new generation of superconducting cavity accelerator measurement and control system. The old system is based on a single digital signal processor (DSP). The new system uses a large programmable array circuit (FPGA) instead, with a multi-gigabit optical link. Both systems now work in parallel in the Free Electron Laser in Hamburg (FLASH). The differences between the systems are shown, based on the measurement results of the working machine. The major advantage of the new system is a bigger area of stability of the machine control loop.

  14. X-ray topographic investigation of the deformation field around spots irradiated by FLASH single pulses

    Czech Academy of Sciences Publication Activity Database

    Wierzchowski, W.; Wieteska, K.; Balcer, T.; Klinger, D.; Sobierajski, R.; Zymierska, D.; Chalupský, Jaromír; Hájková, Věra; Burian, Tomáš; Gleeson, A.J.; Juha, Libor; Tiedtke, K.; Toleikis, S.; Vyšín, Luděk; Wabnitz, H.; Gaudin, J.

    2011-01-01

    Roč. 80, č. 10 (2011), s. 1036-1040 ISSN 0969-806X R&D Projects: GA AV ČR KAN300100702; GA MŠk LC510; GA ČR(CZ) GAP108/11/1312; GA MŠk(CZ) LC528; GA MŠk LA08024; GA AV ČR IAAX00100903; GA MŠk(CZ) ME10046 Institutional research plan: CEZ:AV0Z10100523 Keywords : silicon * FLASH irradiation * x-ray topography * deformation fields Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.227, year: 2011

  15. The October 2014 United States Treasury bond flash crash and the contributory effect of mini flash crashes.

    Directory of Open Access Journals (Sweden)

    Zachary S Levine

    Full Text Available We investigate the causal uncertainty surrounding the flash crash in the U.S. Treasury bond market on October 15, 2014, and the unresolved concern that no clear link has been identified between the start of the flash crash at 9:33 and the opening of the U.S. equity market at 9:30. We consider the contributory effect of mini flash crashes in equity markets, and find that the number of equity mini flash crashes in the three-minute window between market open and the Treasury Flash Crash was 2.6 times larger than the number experienced in any other three-minute window in the prior ten weekdays. We argue that (a this statistically significant finding suggests that mini flash crashes in equity markets both predicted and contributed to the October 2014 U.S. Treasury Bond Flash Crash, and (b mini-flash crashes are important phenomena with negative externalities that deserve much greater scholarly attention.

  16. The October 2014 United States Treasury bond flash crash and the contributory effect of mini flash crashes.

    Science.gov (United States)

    Levine, Zachary S; Hale, Scott A; Floridi, Luciano

    2017-01-01

    We investigate the causal uncertainty surrounding the flash crash in the U.S. Treasury bond market on October 15, 2014, and the unresolved concern that no clear link has been identified between the start of the flash crash at 9:33 and the opening of the U.S. equity market at 9:30. We consider the contributory effect of mini flash crashes in equity markets, and find that the number of equity mini flash crashes in the three-minute window between market open and the Treasury Flash Crash was 2.6 times larger than the number experienced in any other three-minute window in the prior ten weekdays. We argue that (a) this statistically significant finding suggests that mini flash crashes in equity markets both predicted and contributed to the October 2014 U.S. Treasury Bond Flash Crash, and (b) mini-flash crashes are important phenomena with negative externalities that deserve much greater scholarly attention.

  17. Plasmonic Metaparticles on a Blackbody Create Vivid Reflective Colors for Naked-Eye Environmental and Clinical Biodetection

    DEFF Research Database (Denmark)

    Elbahri, Mady; Abdelaziz, Moh eb; Homaeigohar, Shahin

    2017-01-01

    . A configuration of “Plasmonic metaparticles on a blackbody” is demonstrated and utilized for the design of a tailored perfect-colored absorber and for visual detection of environmental dielectrics that is not readily done by extinction plasmonics. Moreover, the Plasmonic Brewster Wavelength (PBW) effect...

  18. Rhodamine B immobilized on hollow Au-HMS material for naked-eye detection of Hg2+ in aqueous media.

    Science.gov (United States)

    Zhang, Na; Li, Gang; Cheng, Zhuhong; Zuo, Xiujin

    2012-08-30

    A simple, effective method has been demonstrated to immobilize Rhodamine B (RhB) probes on mesoporous silica (Au-HMS). The prepared chemosensor (Au-HMS-Probe) was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), UV-vis spectrum and Fourier transform infrared spectroscopy (FT-IR). Further application of Au-HMS-Probe in sensing Hg(2+) was confirmed by fluorescence titration experiment. Au-HMS-Probe afforded "turn-on" fluorescence enhancement and displayed high brightness in water, and it also showed excellent selectivity for Hg(2+) over alkali (Na(+), K(+)), alkaline earth (Mg(2+), Ca(2+)) and other heavy metal ions (Ag(+), Cd(2+), Co(2+), Pb(2+), Ni(2+), Cu(2+), Fe(2+)). Importantly, Au-HMS-Probe could be regenerated by treatment with tetrapropylammonium hydroxide solution. Crown Copyright © 2012. Published by Elsevier B.V. All rights reserved.

  19. Novel rhodamine Schiff base type naked-eye fluorescent probe for sensing Fe3 + and the application in cell

    Science.gov (United States)

    Chen, Xia; Sun, Wei; Bai, Yinjuan; Zhang, Feifei; Zhao, Junxia; Ding, Xiaohu

    2018-02-01

    Three rhodamine schiff-base type fluorescent sensors R1-R3 for detecting iron ion (Fe3 +), 2-furanacrolein rhodamine hydrazone (R1), furfural rhodamine hydrazone (R2) and 2-furanacrolein rhodamine ethylenediamine (R3) have been synthesized by using rhodamine B derivatives and furan derivatives as staring materials. And their recognition abilities for Fe3 + were studied by fluorescence spectroscopy. The result showed that R1 is a best selective probe for Fe3 + over other metal ions in EtOH/H2O (1:1, v/v) due to having 2-furanacrolein for unique space coordination structural. The recognition of Fe3 + and mechanism of the sensor were characterized and determined by fluorescence spectra and Fukui function. And the fluorescence intensity of the probe R1 for Fe3 + was proportional to its concentration with the linear correlation coefficient of 0.9965 and the binding constant of 7.66 × 104 M- 1. And the cell imaging experiment indicated a successful application of the probe R1 for Fe3 + in living cell.

  20. Magnetic Lateral Flow Strip for the Detection of Cocaine in Urine by Naked Eyes and Smart Phone Camera.

    Science.gov (United States)

    Wu, Jing; Dong, Mingling; Zhang, Cheng; Wang, Yu; Xie, Mengxia; Chen, Yiping

    2017-06-05

    Magnetic lateral flow strip (MLFS) based on magnetic bead (MB) and smart phone camera has been developed for quantitative detection of cocaine (CC) in urine samples. CC and CC-bovine serum albumin (CC-BSA) could competitively react with MB-antibody (MB-Ab) of CC on the surface of test line of MLFS. The color of MB-Ab conjugate on the test line relates to the concentration of target in the competition immunoassay format, which can be used as a visual signal. Furthermore, the color density of the MB-Ab conjugate can be transferred into digital signal (gray value) by a smart phone, which can be used as a quantitative signal. The linear detection range for CC is 5-500 ng/mL and the relative standard deviations are under 10%. The visual limit of detection was 5 ng/mL and the whole analysis time was within 10 min. The MLFS has been successfully employed for the detection of CC in urine samples without sample pre-treatment and the result is also agreed to that of enzyme-linked immunosorbent assay (ELISA). With the popularization of smart phone cameras, the MLFS has large potential in the detection of drug residues in virtue of its stability, speediness, and low-cost.

  1. Naked-eye and Selective Detection of Mercury (II Ions in Mixed Aqueous Media Using a Cellulose-based Support

    Directory of Open Access Journals (Sweden)

    Jaume Veciana

    2007-12-01

    Full Text Available A test paper for high-selectivity detecting Hg2+ ions in mixed acetonitrile-watersolutions has been achieved using a bis(ferrocenyl azine, as chromogenic chemosensormolecule, and a solid cellulose fibre, as a substrate. Depending on the amount of mercuryions in contact with the detecting molecule a spectacular color change in the celluloseindicator is produced, being possible to determine the concentration of Hg2+ ions either bynaked eye or spectroscopically.

  2. Determination of the Global-Average Charge Moment of a Lightning Flash Using Schumann Resonances and the LIS/OTD Lightning Data

    Science.gov (United States)

    Boldi, Robert; Williams, Earle; Guha, Anirban

    2018-01-01

    In this paper, we use (1) the 20 year record of Schumann resonance (SR) signals measured at West Greenwich Rhode Island, USA, (2) the 19 year Lightning Imaging Sensor (LIS)/Optical Transient Detector (OTD) lightning data, and (3) the normal mode equations for a uniform cavity model to quantify the relationship between the observed Schumann resonance modal intensity and the global-average vertical charge moment change M (C km) per lightning flash. This work, by integrating SR measurements with satellite-based optical measurements of global flash rate, accomplishes this quantification for the first time. To do this, we first fit the intensity spectra of the observed SR signals to an eight-mode, three parameter per mode, (symmetric) Lorentzian line shape model. Next, using the LIS/OTD lightning data and the normal mode equations for a uniform cavity model, we computed the expected climatological-daily-average intensity spectra. We then regressed the observed modal intensity values against the expected modal intensity values to find the best fit value of the global-average vertical charge moment change of a lightning flash (M) to be 41 C km per flash with a 99% confidence interval of ±3.9 C km per flash, independent of mode. Mode independence argues that the model adequately captured the modal intensity, the most important fit parameter herein considered. We also tested this relationship for the presence of residual modal intensity at zero lightning flashes per second and found no evidence that modal intensity is significantly different than zero at zero lightning flashes per second, setting an upper limit to the amount of nonlightning contributions to the observed modal intensity.

  3. WMO World Record Lightning Extremes: Longest Reported Flash Distance and Longest Reported Flash Duration.

    Science.gov (United States)

    Lang, Timothy J; Pédeboy, Stéphane; Rison, William; Cerveny, Randall S; Montanyà, Joan; Chauzy, Serge; MacGorman, Donald R; Holle, Ronald L; Ávila, Eldo E; Zhang, Yijun; Carbin, Gregory; Mansell, Edward R; Kuleshov, Yuriy; Peterson, Thomas C; Brunet, Manola; Driouech, Fatima; Krahenbuhl, Daniel S

    2017-06-01

    A World Meteorological Organization weather and climate extremes committee has judged that the world's longest reported distance for a single lightning flash occurred with a horizontal distance of 321 km (199.5 mi) over Oklahoma in 2007, while the world's longest reported duration for a single lightning flash is an event that lasted continuously for 7.74 seconds over southern France in 2012. In addition, the committee has unanimously recommended amendment of the AMS Glossary of Meteorology definition of lightning discharge as a "series of electrical processes taking place within 1 second" by removing the phrase "within one second" and replacing with "continuously." Validation of these new world extremes (a) demonstrates the recent and on-going dramatic augmentations and improvements to regional lightning detection and measurement networks, (b) provides reinforcement regarding the dangers of lightning, and (c) provides new information for lightning engineering concerns.

  4. Coherence properties of the radiation from FLASH

    International Nuclear Information System (INIS)

    Schneidmiller, E.A.; Yurkov, M.V.

    2015-02-01

    FLASH is the first free electron laser user facility operating in the vacuum ultraviolet and soft x-ray wavelength range. Many user experiments require knowledge of the spatial and temporal coherence properties of the radiation. In this paper we present an analysis of the coherence properties of the radiation for the fundamental and for the higher odd frequency harmonics. We show that temporal and spatial coherence reach maximum close to the FEL saturation but may degrade significantly in the post-saturation regime. We also find that the pointing stability of short FEL pulses is limited due to the fact that non-azimuthal FEL eigenmodes are not sufficiently suppressed. We discuss possible ways for improving the degree of transverse coherence and the pointing stability.

  5. Article coated with flash bonded superhydrophobic particles

    Science.gov (United States)

    Simpson, John T [Clinton, TN; Blue, Craig A [Knoxville, TN; Kiggans, Jr., James O [Oak Ridge, TN

    2010-07-13

    A method of making article having a superhydrophobic surface includes: providing a solid body defining at least one surface; applying to the surface a plurality of diatomaceous earth particles and/or particles characterized by particle sizes ranging from at least 100 nm to about 10 .mu.m, the particles being further characterized by a plurality of nanopores, wherein at least some of the nanopores provide flow through porosity, the particles being further characterized by a plurality of spaced apart nanostructured features that include a contiguous, protrusive material; flash bonding the particles to the surface so that the particles are adherently bonded to the surface; and applying a hydrophobic coating layer to the surface and the particles so that the hydrophobic coating layer conforms to the nanostructured features.

  6. Flash photolysis-shock tube studies

    Energy Technology Data Exchange (ETDEWEB)

    Michael, J.V. [Argonne National Laboratory, IL (United States)

    1993-12-01

    Even though this project in the past has concentrated on the measurement of thermal bimolecular reactions of atomic species with stable molecules by the flash or laser photolysis-shock tube (FP- or LP-ST) method using atomic resonance absorption spectrometry (ARAS) as the diagnostic technique, during the past year the authors have concentrated on studies of the thermal decompositions of selected chlorocarbon molecules. These studies are necessary if the degradation of chlorine containing organic molecules by incineration are to be understood at the molecular level. Clearly, destruction of these molecules will not only involve abstraction reactions, when possible, but also thermal decomposition followed by secondary reactions of the initially formed atoms and radicals. Studies on the thermal decomposition of CH{sub 3}Cl are complete, and the curve-of-growth for Cl-atom atomic resonance absorption has been determined. The new thermal decomposition studies are similar to those already reported for CH{sub 3}Cl.

  7. A new French flash flood warning service

    Directory of Open Access Journals (Sweden)

    de Saint-Aubin Céline

    2016-01-01

    Full Text Available The French State services in charge of flood forecasting supervise about 22,000 km among the 120,000 km of the French rivers within a warning procedure called Vigilance Crues (http://www.vigicrues.gouv.fr. Some recent dramatic flood events on small watershed not covered by Vigilance Crues highlight the need for a new warning procedure to anticipate violent flash floods that regularly affect rapid river-basins. Thus the concept emerged of an automatic warning service specifically dedicated to local crisis managers. This service will be less elaborated than Vigilance Crues, probably with false alarms and missed events sometimes, but it will deliver a first information. The generation of the warning is based on a simple rainfall-runoff hydrological model developed by Irstea on all French rivers, fed with radar-gauge rainfall grids provided by Meteo-France. Every fifteen minutes, the hydrological model estimates the discharges on the rivers eligible to the service and determine if certain thresholds corresponding to a high or very high flood are likely to be exceeded. The last step of the real-time system is to determine which municipalities are concerned with flood risk and send them an automatic warning by voice call, optionally by sms or email. A specific web interface is available for users to monitor the evolution of the flood risk on maps that are updated every 15 minutes. This new flash flood warning service will be operational early 2017 as a free service for about 8,000 French municipalities.

  8. Bunch arrival time monitors; Concepts towards improving the sensitivity for low charge operation for FLASH II and XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Penirschke, Andreas; Angelovski, Aleksandar; Jakoby, Rolf [TU Darmstadt, Institut fuer Mikrowellentechnik und Photonik, Merckstr. 25, 64283 Darmstadt (Germany); Sydlo, Cezary; Bousonville, Michael; Czwalinna, Marie Kristin; Schlarb, Holger [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Kuhl, Alexander [University of Hamburg, Physics Department, Accelerator Physics Group (Germany); Weiland, Thomas [Technische Univ. Darmstadt (Germany). Inst. fuer Theorie Elektromagnetischer Felder

    2013-07-01

    High gain Free-Electron Lasers can generate ultra short X-ray pulses in the femtosecond range. For a stable operation of the FEL, the precise knowledge of the bunch arrival time is crucial. A novel high bandwidth Bunch Arrival time Monitor was recently installed at FLASH to allow a low charge operation mode with a sub-10 fs resolution for bunch charges of 20 pC or more. The BAM is equipped with cone shaped pickups for the precise measurement of both, the high and low bunch charge operation mode. For the extension of FLASH facility to FLASH II new pickups for the high bandwidth BAMs need to be developed. The new BAM needs to maximize the voltage level of the beam induced signal for low charge operation mode in order to provide sufficient signal strength for the subsequent electronics. In this talk, we present concepts to improve the signal strength at the electro-optic modulators for low charge operation at FLASH II and XFEL.

  9. Freeware eLearning Flash-ECG for learning electrocardiography.

    Science.gov (United States)

    Romanov, Kalle; Kuusi, Timo

    2009-06-01

    Electrocardiographic (ECG) analysis can be taught in eLearning programmes with suitable software that permits the effective use of basic tools such as a ruler and a magnifier, required for measurements. The Flash-ECG (Research & Development Unit for Medical Education, University of Helsinki, Finland) was developed to enable teachers and students to use scanned and archived ECGs on computer screens and classroom projectors. The software requires only a standard web browser with a Flash plug-in and can be integrated with learning environments (Blackboard/WebCT, Moodle). The Flash-ECG is freeware and is available to medical teachers worldwide.

  10. Symptom clusters among MsFLASH clinical trial participants.

    Science.gov (United States)

    Woods, Nancy Fugate; Hohensee, Chancellor; Carpenter, Janet S; Cohen, Lee; Ensrud, Kristine; Freeman, Ellen W; Guthrie, Katherine A; Joffe, Hadine; LaCroix, Andrea Z; Otte, Julie L

    2016-02-01

    Our objective was to identify symptom clusters using standardized measures completed by participants in the Menopausal Strategies: Finding Lasting Answers to Symptoms and Health clinical trial at baseline, including hot flash interference, and sleep, depressive, anxiety, and pain symptoms. Data from all women randomized to interventions and controls from Menopausal Strategies: Finding Lasting Answers to Symptoms and Health studies 1, 2, and 3 (N = 899) were included; 797 with complete data were used in the analyses. Scores from standardized measures obtained at baseline included the following: Hot Flash-Related Daily Interference Scale, Insomnia Severity Index, Pittsburgh Sleep Quality Index, Patient Health Questionnaire-9 measure of depressed mood, Generalized Anxiety Disorder, and Brief Pain Inventory PEG scores (pain intensity [P], interference with enjoyment of life [E], and interference with daily activity [G]). Latent class analysis was used to identify symptom clusters using standardized scale scores and their established cut points. We identified five classes using the Bayesian Information Criterion and the Akaike Information Criterion. Women in classes 1 and 2 had high hot flash interference levels relative to the others, and class 1 (10.5% of total) included severe hot flash interference, severe sleep symptoms, and moderately severe pain symptoms (hot flash, sleep, pain). In class 2 (14.1%), severe hot flash interference was paired with the severe sleep symptoms, and moderate to severe depressed and anxious mood symptoms and pain (hot flash, sleep, mood, pain). In class 3 (39.6%), women reported moderately severe sleep symptoms with moderate hot flash interference, and low severity mood and pain symptoms (hot flash, sleep). Those in class 4 (7.0%) reported moderate hot flash interference with severe levels of anxiety and depressed mood symptoms, but low levels of other symptoms (hot flash, mood). Women in class 5 (28.7%) reported the lowest levels of all

  11. Some design aspects of multistage flash distillation process

    International Nuclear Information System (INIS)

    Ahmad, Mohammad.

    1975-01-01

    The purpose of this paper is to examine the effect of the design variables of multistage flash (MSF) process on the performance and/or the cost of the desalting plant, and to establish certain design trends

  12. Robust Flash 3D-FPA Sensor, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  13. Hot Flashes and Quality of Life among Breast Cancer Patients

    National Research Council Canada - National Science Library

    Jacobs, Linda A

    2005-01-01

    This ongoing longitudinal study examines hot flashes and Quality of Life (QoL) in breast cancer (BC) patients undergoing initial treatment, and develops a taxonomy of the medical and Complementary and Alternative Medicine...

  14. Impact of rainfall spatial variability on Flash Flood Forecasting

    Science.gov (United States)

    Douinot, Audrey; Roux, Hélène; Garambois, Pierre-André; Larnier, Kevin

    2014-05-01

    According to the United States National Hazard Statistics database, flooding and flash flooding have caused the largest number of deaths of any weather-related phenomenon over the last 30 years (Flash Flood Guidance Improvement Team, 2003). Like the storms that cause them, flash floods are very variable and non-linear phenomena in time and space, with the result that understanding and anticipating flash flood genesis is far from straightforward. In the U.S., the Flash Flood Guidance (FFG) estimates the average number of inches of rainfall for given durations required to produce flash flooding in the indicated county. In Europe, flash flood often occurred on small catchments (approximately 100 km2) and it has been shown that the spatial variability of rainfall has a great impact on the catchment response (Le Lay and Saulnier, 2007). Therefore, in this study, based on the Flash flood Guidance method, rainfall spatial variability information is introduced in the threshold estimation. As for FFG, the threshold is the number of millimeters of rainfall required to produce a discharge higher than the discharge corresponding to the first level (yellow) warning of the French flood warning service (SCHAPI: Service Central d'Hydrométéorologie et d'Appui à la Prévision des Inondations). The indexes δ1 and δ2 of Zoccatelli et al. (2010), based on the spatial moments of catchment rainfall, are used to characterize the rainfall spatial distribution. Rainfall spatial variability impacts on warning threshold and on hydrological processes are then studied. The spatially distributed hydrological model MARINE (Roux et al., 2011), dedicated to flash flood prediction is forced with synthetic rainfall patterns of different spatial distributions. This allows the determination of a warning threshold diagram: knowing the spatial distribution of the rainfall forecast and therefore the 2 indexes δ1 and δ2, the threshold value is read on the diagram. A warning threshold diagram is

  15. Flash Cracking Reactor for Waste Plastic Processing, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to design, model, build, and test a novel flash cracking reactor to convert plastic waste, and potentially other unconventional hydrocarbon feedstocks,...

  16. 3D Flash LIDAR EDL Resolution Improvement, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  17. 3D Flash LIDAR Space Laser, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  18. 3D Flash LIDAR real time embedded processing, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  19. Dynamic simulation of flash drums using rigorous physical property calculations

    Directory of Open Access Journals (Sweden)

    F. M. Gonçalves

    2007-06-01

    Full Text Available The dynamics of flash drums is simulated using a formulation adequate for phase modeling with equations of state (EOS. The energy and mass balances are written as differential equations for the internal energy and the number of moles of each species. The algebraic equations of the model, solved at each time step, are those of a flash with specified internal energy, volume and mole numbers (UVN flash. A new aspect of our dynamic simulations is the use of direct iterations in phase volumes (instead of pressure for solving the algebraic equations. It was also found that an iterative procedure previously suggested in the literature for UVN flashes becomes unreliable close to phase boundaries and a new alternative is proposed. Another unusual aspect of this work is that the model expressions, including the physical properties and their analytical derivatives, were quickly implemented using computer algebra.

  20. Photosynthetic efficiency of Chlamydomonas reinhardtii in flashing light

    NARCIS (Netherlands)

    Vejrazka, C.; Janssen, M.G.J.; Streefland, M.; Wijffels, R.H.

    2011-01-01

    Efficient light to biomass conversion in photobioreactors is crucial for economically feasible microalgae production processes. It has been suggested that photosynthesis is enhanced in short light path photobioreactors by mixing-induced flashing light regimes. In this study, photosynthetic

  1. Flash 3D Rendezvous and Docking Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — 3D Flash Ladar is a breakthrough technology for many emerging and existing 3D vision areas, and sensor improvements will have an impact on nearly all these fields....

  2. Abstract Specification of the UBIFS File System for Flash Memory

    Science.gov (United States)

    Schierl, Andreas; Schellhorn, Gerhard; Haneberg, Dominik; Reif, Wolfgang

    Today we see an increasing demand for flash memory because it has certain advantages like resistance against kinetic shock. However, reliable data storage also requires a specialized file system knowing and handling the limitations of flash memory. This paper develops a formal, abstract model for the UBIFS flash file system, which has recently been included in the Linux kernel. We develop formal specifications for the core components of the file system: the inode-based file store, the flash index, its cached copy in the RAM and the journal to save the differences. Based on these data structures we give an abstract specification of the interface operations of UBIFS and prove some of the most important properties using the interactive verification system KIV.

  3. Flash 3D Rendezvous and Docking Sensor, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — 3D Flash Ladar is a breakthrough technology for many emerging and existing 3D vision areas, and sensor improvements will have an impact on nearly all these fields....

  4. Wedge Heat-Flux Indicators for Flash Thermography

    Science.gov (United States)

    Koshti, Ajay M.

    2003-01-01

    Wedge indicators have been proposed for measuring thermal radiation that impinges on specimens illuminated by flash lamps for thermographic inspection. Heat fluxes measured by use of these indicators would be used, along with known thermal, radiative, and geometric properties of the specimens, to estimate peak flash temperatures on the specimen surfaces. These indicators would be inexpensive alternatives to high-speed infrared pyrometers, which would otherwise be needed for measuring peak flash surface temperatures. The wedge is made from any suitable homogenous material such as plastic. The choice of material is governed by the equation given. One side of the wedge is covered by a temperature sensitive compound that decomposes irreversibly when its temperature exceeds a rated temperature (T-rated). The uncoated side would be positioned alongside or in place of the specimen and exposed to the flash, then the wedge thickness at the boundary between the white and blackened portions measured.

  5. Space Qualified, Radiation Hardened, Dense Monolithic Flash Memory, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Space Micro proposes to build a radiation hardened by design (RHBD) flash memory, using a modified version of our RH-eDRAM Memory Controller to solve all the single...

  6. Interim report on flash floods, Area 5 - Nevada Test Site

    International Nuclear Information System (INIS)

    French, R.H.

    1980-09-01

    Examination of the presently available data indicates that consideration must be given to the possibility of flash floods when siting waste management facilities in Area 5 of the Nevada Test Site. 6 figures, 7 tables

  7. The Essential Guide to 3D in Flash

    CERN Document Server

    Olsson, Ronald A

    2010-01-01

    If you are an ActionScript developer or designer and you would like to work with 3D in Flash, this book is for you. You will learn the core Flash 3D concepts, using the open source Away3D engine as a primary tool. Once you have mastered these skills, you will be able to realize the possibilities that the available Flash 3D engines, languages, and technologies have to offer you with Flash and 3D.* Describes 3D concepts in theory and their implementation using Away3D* Dives right in to show readers how to quickly create an interactive, animated 3D scene, and builds on that experience throughout

  8. Portable flash X-ray systems: applications and techniques

    International Nuclear Information System (INIS)

    Bryant, L.E.

    1976-01-01

    Three portable flash x-ray equipments are described, and applications such as jet and high explosive studies, bullet impact and lead casting experiments are given as well as techniques for triggering and protection of equipment and film

  9. A high repetition rate XUV seeding source for FLASH2

    International Nuclear Information System (INIS)

    Willner, Arik

    2012-05-01

    Improved performance of free-electron laser (FEL) light sources in terms of timing stability, pulse shape and spectral properties of the amplified FEL pulses is of interest in material science, the fields of ultrafast dynamics, biology, chemistry and even special branches in industry. A promising scheme for such an improvement is direct seeding with high harmonic generation (HHG) in a noble gas target. A free-electron laser seeded by an external extreme ultraviolet (XUV) source is planned for FLASH2 at DESY in Hamburg. The requirements for the XUV/soft X-ray source can be summarized as follows: A repetition rate of at least 100 kHz in a 10 Hz burst is needed at variable wavelengths from 10 to 40 nm and pulse energies of several nJ within a single laser harmonic. This application requires a laser amplifier system with exceptional parameters, mJ-level pulse energy, 10-15 fs pulse duration at 100 kHz (1 MHz) burst repetition rate. A new optical parametric chirped-pulse amplification (OPCPA) system is under development in order to meet these requirements, and very promising results have been achieved in the last three years. In parallel to this development, a new HHG concept is necessary to sustain high average power of the driving laser system and to generate harmonics with high conversion efficiencies. Currently, the highest conversion efficiency with HHG has been demonstrated using gas-filled capillary targets. For our application, only a free-jet target can be used for HHG, in order to overcome damage threshold limitations of HHG target optics at a high repetition rate. A novel dual-gas multijet gas target has been developed and first experiments show remarkable control of the degree of phase matching forming the basis for improved control of the harmonic photon flux and the XUV pulse characteristics. The basic idea behind the dual-gas concept is the insertion of matching zones in between multiple HHG sources. These matching sections are filled with hydrogen which

  10. A high repetition rate XUV seeding source for FLASH2

    Energy Technology Data Exchange (ETDEWEB)

    Willner, Arik

    2012-05-15

    Improved performance of free-electron laser (FEL) light sources in terms of timing stability, pulse shape and spectral properties of the amplified FEL pulses is of interest in material science, the fields of ultrafast dynamics, biology, chemistry and even special branches in industry. A promising scheme for such an improvement is direct seeding with high harmonic generation (HHG) in a noble gas target. A free-electron laser seeded by an external extreme ultraviolet (XUV) source is planned for FLASH2 at DESY in Hamburg. The requirements for the XUV/soft X-ray source can be summarized as follows: A repetition rate of at least 100 kHz in a 10 Hz burst is needed at variable wavelengths from 10 to 40 nm and pulse energies of several nJ within a single laser harmonic. This application requires a laser amplifier system with exceptional parameters, mJ-level pulse energy, 10-15 fs pulse duration at 100 kHz (1 MHz) burst repetition rate. A new optical parametric chirped-pulse amplification (OPCPA) system is under development in order to meet these requirements, and very promising results have been achieved in the last three years. In parallel to this development, a new HHG concept is necessary to sustain high average power of the driving laser system and to generate harmonics with high conversion efficiencies. Currently, the highest conversion efficiency with HHG has been demonstrated using gas-filled capillary targets. For our application, only a free-jet target can be used for HHG, in order to overcome damage threshold limitations of HHG target optics at a high repetition rate. A novel dual-gas multijet gas target has been developed and first experiments show remarkable control of the degree of phase matching forming the basis for improved control of the harmonic photon flux and the XUV pulse characteristics. The basic idea behind the dual-gas concept is the insertion of matching zones in between multiple HHG sources. These matching sections are filled with hydrogen which

  11. Tutorial Pengenalan Adobe Photoshop Menggunakan Adobe Flash CS3

    OpenAIRE

    Mayoka, Rio

    2011-01-01

    Kajian ini bertujuan untuk membangun sebuah aplikasi yang dapat menjadi alat bantu dalam pembelajaran Adobe Photoshop, dimana terdapat beberapa materi pengenalan dasar Adobe Photoshop. Aplikasi ini suatu gagasan dengan membuat tutorial beranimasi yang interatif. Aplikasi ini dibuat dengan menggunakan Adobe Flash CS3 dan dapat dijalankan dengan Flash player. Aplikasi ini dapat membantu para penggunanya dalam memahami pengenalan Adobe Photoshop, terutama pengenalan tool pada Adob...

  12. Flash Nanoprecipitation: Particle Structure and Stability

    Science.gov (United States)

    Pustulka, Kevin M.; Wohl, Adam R.; Lee, Han Seung; Michel, Andrew R.; Han, Jing; Hoye, Thomas R.; McCormick, Alon V.; Panyam, Jayanth; Macosko, Christopher W.

    2013-01-01

    Flash nanoprecipitation (FNP) is a process that, through rapid mixing, stabilizes an insoluble low molecular weight compound in a nano-sized, polymer-stabilized delivery vehicle. The polymeric components are typically amphiphilic diblock copolymers (BCPs). In order to fully exploit the potential of FNP, factors affecting particle structure, size, and stability must be understood. Here we show that polymer type, hydrophobicity and crystallinity of the small molecule, and small molecule loading levels all affect particle size and stability. Of the four block copolymers (BCP) that we have studied here, poly(ethylene glycol)-b-poly(lactic-co-glycolic acid) (PEG-b-PLGA) was most suitable for potential drug delivery applications due to its ability to give rise to stable nanoparticles, its biocompatibility, and its degradability. We found little difference in particle size when using PLGA block sizes over the range of 5 to 15kDa. The choice of hydrophobic small molecule was important, as molecules with a calculated water-octanol partition coefficient (clogP) below 6 gave rise to particles that were unstable and underwent rapid Ostwald ripening. Studies probing the internal structure of nanoparticles were also performed. Analysis of differential scanning calorimetry (DSC), cryogenic transmission electron microscopy (cryo-TEM), and 1H-NMR experiments support a three-layer core-shell-corona nanoparticle structure. PMID:24053447

  13. Mass flow determination in flashing openings

    Directory of Open Access Journals (Sweden)

    G Polanco

    2016-04-01

    Full Text Available The output flow characteristics in most of the industrial accidental releasesare related to a two-phase flow and their represent a potential hazard tofacilities, personnel, equipments and environment. If these releases involvesuperheated liquid then a flashing process can take place, where a liquidgasmixture due to the breaking of the metastable state can significantlyaffect the hazard zone. The calculation of the conditions for the flow after aflashing opening is very relevant in order to understand the mechanismspresent after the release opening. Numerical modelling represents animportant tool to approach these types of phenomena. However,the accuracy of the obtained results will depend on the realistic values ofthe flow parameters taken as input information to perform the CFD work.The model proposed here is based on the assumption of the existence ofa non reversible work in the system and the use of the thermodynamicjump formulation to model the phase change process in order to predictphase velocity and mass flow. The obtained results have a goodagreement with the experimental data available.

  14. Flash pyrolysis fuel oil: bio-pok

    Energy Technology Data Exchange (ETDEWEB)

    Gust, S. [Neste Oy, Porvoo (Finland)

    1997-12-01

    Samples of flash pyrolysis liquid produced by Union Fenosa, Spain from pine and straw and samples produced by Ensyn of Canada from mixed hardwoods were combusted with simple pressure atomization equipment commonly used with light fuel oils in intermediate size (0.1-1 MW) boilers. With a number of modifications to the combustion system, carbon monoxide (CO) and nitrous oxide (NO{sub x}) could be reduced to acceptable levels: CO < 30 ppm and NO{sub x} < 140 ppm. Particulate emissions which were initially very high (Bacharach 4-5) were reduced (Bach. 2-3) by system improvements but are still higher than from light fuel oil (Bach. <1). The modifications to the combustion system were: refractory section between burner and boiler, acid resistant progressive cavity pump, higher liquid preheat temperature and higher pressure than for light fuel oils. The main problems with pyrolysis liquids concerns their instability or reactivity. At temperatures above 100 deg C they begin to coke, their viscosity increases during storage and oxygen from air causes skin formation. This requires that special handling procedures are developed for fuel storage, delivery and combustion systems. (orig.)

  15. Flash Vacuum Pyrolysis: Techniques and Reactions.

    Science.gov (United States)

    Wentrup, Curt

    2017-11-20

    Flash vacuum pyrolysis (FVP) had its beginnings in the 1940s and 1950s, mainly through mass spectrometric detection of pyrolytically formed free radicals. In the 1960s many organic chemists started performing FVP experiments with the purpose of isolating new and interesting compounds and understanding pyrolysis processes. Meanwhile, many different types of apparatus and techniques have been developed, and it is the purpose of this review to present the most important methods as well as a survey of typical reactions and observations that can be achieved with the various techniques. This includes preparative FVP, chemical trapping reactions, matrix isolation, and low temperature spectroscopy of reactive intermediates and unstable molecules, the use of online mass, photoelectron, microwave, and millimeterwave spectroscopies, gas-phase laser pyrolysis, pulsed pyrolysis with supersonic jet expansion, very low pressure pyrolysis for kinetic investigations, solution-spray and falling-solid FVP for involatile compounds, and pyrolysis over solid supports and reagents. Moreover, the combination of FVP with matrix isolation and photochemistry is a powerful tool for investigations of reaction mechanism. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Production of bio-oil with flash pyrolysis; Biooeljyn tuotanto flash-pyrolyysillae ja sen poltto

    Energy Technology Data Exchange (ETDEWEB)

    Nyroenen, T. [Vapo Oy, Jyvaeskylae (Finland)

    1997-12-01

    The target of the R and D work is to study the production of bio-oils using Flash-pyrolysis technology and utilisation of the bio-oil in oil-fuelled boilers. The PDU-unit was installed at VTT Energy in Otaniemi in April 1996. The first test were carried out in June. In the whole project Vapo Oy is responsible for: acquiring the 20 kg/h PDU-device for development; follow up of the engine tests; the investment of 5 MW demonstration plant; to carry on the boiler and engine tests with Finnish bio-oils. (orig.)

  17. Implementation of the laser-based femtosecond precision synchronization system at FLASH

    International Nuclear Information System (INIS)

    Schulz, Sebastian

    2011-05-01

    FLASH, the high-gain free-electron laser (FEL) in Hamburg, enables the generation of light pulses with wavelengths in the soft X-ray region and durations down to a few femtoseconds. To fully exploit this capability in time-resolved pump-probe experiments, and for the projected externally seeded operation, the critical components of the accelerator and several external laser systems have to be synchronized with a temporal accuracy at least in the same order of magnitude. This can not be realized purely with established RF-based systems and therefore, an optical, laser-based synchronization system is required. In this thesis, the optical synchronization system of FLASH has been, based on previous successful proof-of-principle experiments, massively extended. One major topic is the comprehensive characterization of the timing reference of the system and a comparison of different types of such master laser oscillators, as well as studies on their short- and long-term stability. Similar investigations have been carried out for the upgraded and newly installed length-stabilized fiber links, which connect the remote locations at the accelerator to the optical timing reference. The successful demonstration of an all-optical synchronization of a Ti:sapphire oscillator with sub-10 femtosecond timing jitter and the connection of the photo injector laser system to the synchronization system mark further important key experiments of this thesis. The robustness of the actual implementations played a key role, as the synchronization system forms the basis for the future, operator-friendly arrival time feedback.

  18. Some Improvements in Utilization of Flash Memory Devices

    Science.gov (United States)

    Gender, Thomas K.; Chow, James; Ott, William E.

    2009-01-01

    Two developments improve the utilization of flash memory devices in the face of the following limitations: (1) a flash write element (page) differs in size from a flash erase element (block), (2) a block must be erased before its is rewritten, (3) lifetime of a flash memory is typically limited to about 1,000,000 erases, (4) as many as 2 percent of the blocks of a given device may fail before the expected end of its life, and (5) to ensure reliability of reading and writing, power must not be interrupted during minimum specified reading and writing times. The first development comprises interrelated software components that regulate reading, writing, and erasure operations to minimize migration of data and unevenness in wear; perform erasures during idle times; quickly make erased blocks available for writing; detect and report failed blocks; maintain the overall state of a flash memory to satisfy real-time performance requirements; and detect and initialize a new flash memory device. The second development is a combination of hardware and software that senses the failure of a main power supply and draws power from a capacitive storage circuit designed to hold enough energy to sustain operation until reading or writing is completed.

  19. Normalized Temperature Contrast Processing in Infrared Flash Thermography

    Science.gov (United States)

    Koshti, Ajay M.

    2016-01-01

    The paper presents further development in normalized contrast processing used in flash infrared thermography method. Method of computing normalized image or pixel intensity contrast, and normalized temperature contrast are provided. Methods of converting image contrast to temperature contrast and vice versa are provided. Normalized contrast processing in flash thermography is useful in quantitative analysis of flash thermography data including flaw characterization and comparison of experimental results with simulation. Computation of normalized temperature contrast involves use of flash thermography data acquisition set-up with high reflectivity foil and high emissivity tape such that the foil, tape and test object are imaged simultaneously. Methods of assessing other quantitative parameters such as emissivity of object, afterglow heat flux, reflection temperature change and surface temperature during flash thermography are also provided. Temperature imaging and normalized temperature contrast processing provide certain advantages over normalized image contrast processing by reducing effect of reflected energy in images and measurements, therefore providing better quantitative data. Examples of incorporating afterglow heat-flux and reflection temperature evolution in flash thermography simulation are also discussed.

  20. High-speed three-frame image recording system using colored flash units and low-cost video equipment

    Science.gov (United States)

    Racca, Roberto G.; Scotten, Larry N.

    1995-05-01

    This article describes a method that allows the digital recording of sequences of three black and white images at rates of several thousand frames per second using a system consisting of an ordinary CCD camcorder, three flash units with color filters, a PC-based frame grabber board and some additional electronics. The maximum framing rate is determined by the duration of the flashtube emission, and for common photographic flash units lasting about 20 microsecond(s) it can exceed 10,000 frames per second in actual use. The subject under study is strobe- illuminated using a red, a green and a blue flash unit controlled by a special sequencer, and the three images are captured by a color CCD camera on a single video field. Color is used as the distinguishing parameter that allows the overlaid exposures to be resolved. The video output for that particular field will contain three individual scenes, one for each primary color component, which potentially can be resolved with no crosstalk between them. The output is electronically decoded into the primary color channels, frame grabbed and stored into digital memory, yielding three time-resolved images of the subject. A synchronization pulse provided by the flash sequencer triggers the frame grabbing so that the correct video field is acquired. A scheme involving the use of videotape as intermediate storage allows the frame grabbing to be performed using a monochrome video digitizer. Ideally each flash- illuminated scene would be confined to one color channel, but in practice various factors, both optical and electronic, affect color separation. Correction equations have been derived that counteract these effects in the digitized images and minimize 'ghosting' between frames. Once the appropriate coefficients have been established through a calibration procedure that needs to be performed only once for a given configuration of the equipment, the correction process is carried out transparently in software every time a

  1. Development of Ultrafast Laser Flash Methods for Measuring Thermophysical Properties of Thin Films and Boundary Thermal Resistances

    Science.gov (United States)

    Baba, Tetsuya; Taketoshi, Naoyuki; Yagi, Takashi

    2011-11-01

    Reliable thermophysical property values of thin films are important to develop advanced industrial technologies such as highly integrated electronic devices, phase-change memories, magneto-optical disks, light-emitting diodes (LEDs), organic light-emitting diodes (OLEDs), semiconductor lasers (LDs), flat-panel displays, and power electronic devices. In order to meet these requirements, the National Metrology Institute of Japan of the National Institute of Advanced Industrial Science and Technology (NMIJ/AIST) has developed ultrafast laser flash methods heated by picosecond pulse or nanosecond pulse with the same geometrical configuration as the laser flash method, which is the standard method to measure the thermal diffusivity of bulk materials. Since these pulsed light heating methods induce one-dimensional heat diffusion across a well-defined length of the specimen thickness, the absolute value of thermal diffusivity across thin films can be measured reliably. Using these ultrafast laser flash methods, the thermal diffusivity of each layer of multilayered thin films and the boundary thermal resistance between the layers can be determined from the observed transient temperature curves based on the response function method. The thermophysical properties of various thin films important for modern industries such as the transparent conductive films used for flat-panel displays, hard coating films, and multilayered films of next-generation phase-change optical disks have been measured by these methods.

  2. Objective hot flashes are negatively related to verbal memory performance in midlife women.

    Science.gov (United States)

    Maki, Pauline M; Drogos, Lauren L; Rubin, Leah H; Banuvar, Suzanne; Shulman, Lee P; Geller, Stacie E

    2008-01-01

    To test the hypothesis that hot flashes specifically relate to verbal memory performance by examining the relationship between objective hot flashes and cognitive test performance in women with moderate to severe vasomotor symptoms. In an observational study, 29 midlife women (mean age, 53 y) with moderate to severe hot flashes provided measures of objective hot flashes with an ambulatory hot flash monitor, subjective hot flashes with a diary and questionnaire, and objective measures of verbal memory and other cognitive functions with standardized neuropsychological tests. The mean number of objective hot flashes was 19.5 per day (range, 6 to 35), including 15.3 (range, 6 to 35) during waking hours and 4.2 (range, 0 to 9) during sleep. The mean sensitivity (ie, subjective detection of objectively measured hot flashes) was 60%. Regression analyses revealed that total number of objective hot flashes, sleep duration, and verbal knowledge were significant predictors of delayed verbal memory. Verbal fluency correlated positively with objective daytime hot flashes. Hot flashes did not predict performance on any of the other secondary cognitive measures (ie, attention, working memory, visual memory), although poor sleep predicted worse performance on several outcome measures. Highly symptomatic women underreport the number of objective hot flashes that they experience by 43%. Verbal memory performance relates significantly to the objective number of hot flashes women experience but not to the number of hot flashes that they report. These findings suggest that physiological factors related to hot flashes, rather than psychological factors, predict poorer verbal memory function.

  3. Performance improvement of charge trap flash memory by using a composition-modulated high-k trapping layer

    International Nuclear Information System (INIS)

    Tang Zhen-Jie; Li Rong; Yin Jiang

    2013-01-01

    A composition-modulated (HfO 2 ) x (Al 2 O3) 1−x charge trapping layer is proposed for charge trap flash memory by controlling the Al atom content to form a peak and valley shaped band gap. It is found that the memory device using the composition-modulated (HfO 2 ) x (Al 2 O 3 ) 1−x as the charge trapping layer exhibits a larger memory window of 11.5 V, improves data retention even at high temperature, and enhances the program/erase speed. Improvements of the memory characteristics are attributed to the special band-gap structure resulting from the composition-modulated trapping layer. Therefore, the composition-modulated charge trapping layer may be useful in future nonvolatile flash memory device application. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

  4. "Know What to Do If You Encounter a Flash Flood": Mental Models Analysis for Improving Flash Flood Risk Communication and Public Decision Making.

    Science.gov (United States)

    Lazrus, Heather; Morss, Rebecca E; Demuth, Julie L; Lazo, Jeffrey K; Bostrom, Ann

    2016-02-01

    Understanding how people view flash flood risks can help improve risk communication, ultimately improving outcomes. This article analyzes data from 26 mental models interviews about flash floods with members of the public in Boulder, Colorado, to understand their perspectives on flash flood risks and mitigation. The analysis includes a comparison between public and professional perspectives by referencing a companion mental models study of Boulder-area professionals. A mental models approach can help to diagnose what people already know about flash flood risks and responses, as well as any critical gaps in their knowledge that might be addressed through improved risk communication. A few public interviewees mentioned most of the key concepts discussed by professionals as important for flash flood warning decision making. However, most interviewees exhibited some incomplete understandings and misconceptions about aspects of flash flood development and exposure, effects, or mitigation that may lead to ineffective warning decisions when a flash flood threatens. These include important misunderstandings about the rapid evolution of flash floods, the speed of water in flash floods, the locations and times that pose the greatest flash flood risk in Boulder, the value of situational awareness and environmental cues, and the most appropriate responses when a flash flood threatens. The findings point to recommendations for ways to improve risk communication, over the long term and when an event threatens, to help people quickly recognize and understand threats, obtain needed information, and make informed decisions in complex, rapidly evolving extreme weather events such as flash floods. © 2015 Society for Risk Analysis.

  5. Flash Mixing of the White Dwarf Cooling Curve Spectroscopic Confirmation in NGC 2808

    Science.gov (United States)

    Brown, Thomas M.; Lanz, Thierry; Sweigart, Allen V.; Cracraft, Misty; Hubeny, Ivan; Landsman, Wayne B.

    2009-01-01

    We present new HST far-UV spectroscopy of two dozen hot evolved stars in NGC 2808, a massive globular cluster with a large population of "blue-hook" stars. The blue-hook stars are found in ultraviolet color-magnitude diagrams of the most massive globular clusters, where they fall at luminosities immediately below the hot end of the horizontal branch (HB), in a region of the HR diagram unexplained by canonical stellar evolution theory. Using new theoretical evolutionary and atmospheric models, we have shown that these subluminous HB stars are very likely the progeny of stars that undergo extensive internal mixing during a late He-core flash on the white dwarf cooling curve. This flash mixing leads to hotter temperatures and an enormous enhancement of the surface He and C abundances; the hotter temperatures and associated decrease in the hydrogen opacity shortward of the Lyman limit makes the stars brighter in the extreme UV but appear sub luminous in the UV and optical. Our far-UV spectroscopy demonstrates that, relative to normal HB stars at the same color, the blue-hook stars of NGC 2808 are hotter and greatly enhanced in He and C, thus providing unambiguous evidence of flash mixing in the subluminous population. Although the C abundance in the blue-hook stars is orders of magnitude larger than that in the normal HB stars, the atmospheric C abundance in both the blue-hook and normal HB stars appears to be affected by gravitational settling. The abundance variations seen in C, Si, and the Fe-peak elements indicate that atmospheric diffusion is at play in our sample, with all of our hot subdwarfs at 25,000 K to 50,000 K exhibiting large enhancements of the iron-peak elements. The hottest subdwarfs in our blue-hook sample may be pulsators, given that they fall in the temperature range of newly-discovered pulsating subdwarfs in omega Cen.

  6. Lunar Impact Flash Locations from NASA's Lunar Impact Monitoring Program

    Science.gov (United States)

    Moser, D. E.; Suggs, R. M.; Kupferschmidt, L.; Feldman, J.

    2015-01-01

    Meteoroids are small, natural bodies traveling through space, fragments from comets, asteroids, and impact debris from planets. Unlike the Earth, which has an atmosphere that slows, ablates, and disintegrates most meteoroids before they reach the ground, the Moon has little-to-no atmosphere to prevent meteoroids from impacting the lunar surface. Upon impact, the meteoroid's kinetic energy is partitioned into crater excavation, seismic wave production, and the generation of a debris plume. A flash of light associated with the plume is detectable by instruments on Earth. Following the initial observation of a probable Taurid impact flash on the Moon in November 2005,1 the NASA Meteoroid Environment Office (MEO) began a routine monitoring program to observe the Moon for meteoroid impact flashes in early 2006, resulting in the observation of over 330 impacts to date. The main objective of the MEO is to characterize the meteoroid environment for application to spacecraft engineering and operations. The Lunar Impact Monitoring Program provides information about the meteoroid flux in near-Earth space in a size range-tens of grams to a few kilograms-difficult to measure with statistical significance by other means. A bright impact flash detected by the program in March 2013 brought into focus the importance of determining the impact flash location. Prior to this time, the location was estimated to the nearest half-degree by visually comparing the impact imagery to maps of the Moon. Better accuracy was not needed because meteoroid flux calculations did not require high-accuracy impact locations. But such a bright event was thought to have produced a fresh crater detectable from lunar orbit by the NASA spacecraft Lunar Reconnaissance Orbiter (LRO). The idea of linking the observation of an impact flash with its crater was an appealing one, as it would validate NASA photometric calculations and crater scaling laws developed from hypervelocity gun testing. This idea was

  7. Expression of the nos gene and firefly flashing: a test of the nitric-oxide-mediated flash control model.

    Science.gov (United States)

    Ohtsuki, Hajime; Yokoyama, Jun; Ohba, Nobuyoshi; Ohmiya, Yoshihiro; Kawata, Masakado

    2014-04-19

    Fireflies (Coleoptera: Lampyridae) emit various types of light that differ among species and populations of the same species. Their lights are assumed to be biological properties that play important ecological and evolutionary roles. Some species in the Lampyridae emit periodic luminescence, the patterns of which are characterized by species-specific intervals. In previous work, it was predicted that the nitric oxide (NO) regulates the oxygen supply required for the bioluminescence reaction of fireflies. Here, the expression of the NO synthase (NOS) mRNA in some fireflies was examined to verify the predictive model of nitric-oxide-mediated flash control in these insects. The expression of the nos gene in the lantern organ was observed not only in nocturnal flashing species but also in diurnal non-flashing species. It was shown that the expression levels of nos were higher in the lantern of Luciola cruciata (Motschulsky) larvae, which that emits continuous light, than in other body parts, although expression in the lantern of the adults, who flash periodically, was not high. Furthermore, there was no significant difference in expression levels among adults of Luciola cruciata characterized by different flashing intervals. The data do not support the model of an NO-mediated flash control mechanism, during which oxygen becomes available for the luciferin-luciferase reaction through NO-mediated inhibition of mitochondrial respiration. It is also indicated that flash patterns do not co-vary with NOS production. However, high nos expression in the larval lantern suggests that NO may play a role in producing continuous light by functioning as a neurotransmitter signal for bioluminescence. This is an open access paper. We use the Creative Commons Attribution 3.0 license that permits unrestricted use, provided that the paper is properly attributed.

  8. Search for the radio occulation flash at Jupiter

    International Nuclear Information System (INIS)

    Martin, J.M.; Tyler, G.L.; Eshleman, V.R.; Wood, G.E.; Lindall, G.F.

    1981-01-01

    The 'evolute flash' a focusing effect caused by the curvature of a planet's limb, was sought in the radio data taken during the occulation of Voyager 1 by Jupiter, using a modified matched-filter technique. The expected frequency structure of the flash signal is double branched, while the intensity structure is highly localized in time. The search for the signal was carried out over a 6.4 s period. The signal parameters were varied to span the uncertainties introduced by imperfect knowledge of the orbit of the spacecraft and the shape of Jupiter. Several peaks at the 8 standard deviation level were present in the filter output. However, these peaks were separated in time by up to 3.3 s, and none could be identified as the flash. From this negative result a lower bound on the absorption along a ray with periapsis near the 4 bar level in Jupiter's atmosphere can be established at 25 dB. Employing the new Voyager results on the structure of the atmosphere of Jupiter and the mixing ratio of the absorbent ammonia, as well as the improved knowledge of flash characteristics resulting from this study, we estimate that the flash would have been detected if the distance behind the planet where the spacecraft trajectory crossed the evolute were at least 20 Jupiter radii, as compared with a value near 7 in the experiment. For focusing at this greater distance, the atmospheric pressure at the ray periapsis would be between 1.5 and 2 bar

  9. Theoretical investigation of flash vaporisation in a screw expander

    Science.gov (United States)

    Vasuthevan, Hanushan; Brümmer, Andreas

    2017-08-01

    In the present study flash vaporisation of liquid injection in a twin screw expander for a Trilateral Flash Cycle (TFC) is examined theoretically. The TFC process comprises a pressure increase in the working fluid, followed by heating the liquid close to boiling point. The hot liquid is injected into the working chamber of a screw expander. During this process the pressure of the liquid drops below the saturation pressure, while the temperature of the liquid remains virtually constant. Hence the liquid is superheated and in a metastable state. The liquid jet seeks to achieve a stable state in thermodynamic equilibrium and is therefore partially vaporised. This effect is referred to as flash vaporisation. Accordingly, a two-phase mixture, consisting of vapour and liquid, exists in the working chamber. Thermodynamic simulations were carried out using water as the working fluid for representative screw expander geometry. The simulations presented are performed from two different aspects during the filling process of a screw expander. The first case is the vaporisation of the injected liquid in a state of thermodynamic equilibrium, whereby the two-phase mixture is treated entirely as a compressible and homogeneous gas. The second case considers flashing efficiency. It describes the quantity of flashed vapour and consists of a liquid and vapour domain. Both models are compared and analysed with respect to the operational behaviour of a screw expander.

  10. Flash photolysis of rhodopsin in the cat retina

    International Nuclear Information System (INIS)

    Ripps, H.; Mehaffey, L.; Siegel, I.M.; Ernst, W.; Kemp, C.M.

    1981-01-01

    The bleaching of rhodopsin by short-duration flashes of a xenon discharge lamp was studied in vivo in the cat retina with the aid of a rapid, spectral-scan fundus reflectometer. Difference spectra recorded over a broad range of intensities showed that the bleaching efficacy of high-intensity flashes was less than that of longer duration, steady lights delivering the same amount of energy. Both the empirical results and those derived from a theoretical analysis of flash photolysis indicate that, under the conditions of these experiments, the upper limit of the flash bleaching of rhodopsin in cat is approximately 90%. Although the fact that a full bleach could not be attained is attributable to photoreversal, i.e., the photic regeneration of rhodopsin from its light-sensitive intermediates, the 90% limit is considerably higher than the 50% (or lower) value obtained under other experimental circumstances. Thus, it appears that the duration (approximately 1 ms) and spectral composition of the flash, coupled with the kinetic parameters of the thermal and photic reactions in the cat retina, reduce the light-induced regeneration of rhodopsin to approximately 10%

  11. Venlafaxine and desvenlafaxine in the management of menopausal hot flashes

    Directory of Open Access Journals (Sweden)

    Johnson ED

    2011-09-01

    Full Text Available Vasomotor flushes are common complaints of women during and after menopause, affecting about 75 percent of this population. Estrogen therapy is the most effective treatment for hot flashes. However, there are a significant number of women who have contraindications or choose not to use estrogen due to potential risks such as breast cancer and thromboembolic disorders. These women need alternative options. The selective norepinephrine reuptake inhibitors, venlafaxine and desvenlafaxine, have shown efficacy in alleviating hot flashes.Objective: The purpose of this review is to assess the efficacy and tolerability of these two agents for treatment of hot flashes in healthy postmenopausal women.Methods: A literature search of the MEDLINE and Ovid databases from inception to June 2011 was conducted. Randomized controlled trials, published in English, with human participants were included. Studies included postmenopausal women, and trials with breast cancer only populations were excluded.Results: Venlafaxine reduced hot flashes by 37 to 61 percent and desvenlafaxine by 55 to 69 percent. Both agents were well tolerated. The most common adverse effects were headache, dry mouth, nausea, insomnia, somnolence, and dizziness.Conclusion: Based on the evidence, venlafaxine and desvenlafaxine are both viable options for reducing the frequency and severity of hot flashes.

  12. Modeling experimental plasma diagnostics in the FLASH code: proton radiography

    Science.gov (United States)

    Flocke, Norbert; Weide, Klaus; Feister, Scott; Tzeferacos, Petros; Lamb, Donald

    2017-10-01

    Proton radiography is an important diagnostic tool for laser plasma experiments and for studying magnetized plasmas. We describe a new synthetic proton radiography diagnostic recently implemented into the FLASH code. FLASH is an open source, finite-volume Eulerian, spatially adaptive radiation hydrodynamics and magneto-hydrodynamics code that incorporates capabilities for a broad range of physical processes. Proton radiography is modeled through the use of the (relativistic) Lorentz force equation governing the motion of protons through 3D domains. Both instantaneous (one time step) and time-resolved (over many time steps) proton radiography can be simulated. The code module is also equipped with several different setup options (beam structure and detector screen placements) to reproduce a large variety of experimental proton radiography designs. FLASH's proton radiography diagnostic unit can be used either during runtime or in post-processing of simulation results. FLASH is publicly available at flash.uchicago.edu. U.S. DOE NNSA, U.S. DOE NNSA ASC, U.S. DOE Office of Science and NSF.

  13. A Unified Flash Flood Database across the United States

    Science.gov (United States)

    Gourley, Jonathan J.; Hong, Yang; Flamig, Zachary L.; Arthur, Ami; Clark, Robert; Calianno, Martin; Ruin, Isabelle; Ortel, Terry W.; Wieczorek, Michael; Kirstetter, Pierre-Emmanuel; Clark, Edward; Krajewski, Witold F.

    2013-01-01

    Despite flash flooding being one of the most deadly and costly weather-related natural hazards worldwide, individual datasets to characterize them in the United States are hampered by limited documentation and can be difficult to access. This study is the first of its kind to assemble, reprocess, describe, and disseminate a georeferenced U.S. database providing a long-term, detailed characterization of flash flooding in terms of spatiotemporal behavior and specificity of impacts. The database is composed of three primary sources: 1) the entire archive of automated discharge observations from the U.S. Geological Survey that has been reprocessed to describe individual flooding events, 2) flash-flooding reports collected by the National Weather Service from 2006 to the present, and 3) witness reports obtained directly from the public in the Severe Hazards Analysis and Verification Experiment during the summers 2008–10. Each observational data source has limitations; a major asset of the unified flash flood database is its collation of relevant information from a variety of sources that is now readily available to the community in common formats. It is anticipated that this database will be used for many diverse purposes, such as evaluating tools to predict flash flooding, characterizing seasonal and regional trends, and improving understanding of dominant flood-producing processes. We envision the initiation of this community database effort will attract and encompass future datasets.

  14. Multi-Level Bitmap Indexes for Flash Memory Storage

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kesheng; Madduri, Kamesh; Canon, Shane

    2010-07-23

    Due to their low access latency, high read speed, and power-efficient operation, flash memory storage devices are rapidly emerging as an attractive alternative to traditional magnetic storage devices. However, tests show that the most efficient indexing methods are not able to take advantage of the flash memory storage devices. In this paper, we present a set of multi-level bitmap indexes that can effectively take advantage of flash storage devices. These indexing methods use coarsely binned indexes to answer queries approximately, and then use finely binned indexes to refine the answers. Our new methods read significantly lower volumes of data at the expense of an increased disk access count, thus taking full advantage of the improved read speed and low access latency of flash devices. To demonstrate the advantage of these new indexes, we measure their performance on a number of storage systems using a standard data warehousing benchmark called the Set Query Benchmark. We observe that multi-level strategies on flash drives are up to 3 times faster than traditional indexing strategies on magnetic disk drives.

  15. Optical countermeasures against CLOS weapon systems

    Science.gov (United States)

    Toet, Alexander; Benoist, Koen W.; van Lingen, Joost N. J.; Schleijpen, H. Ric M. A.

    2013-10-01

    There are many weapon systems in which a human operator acquires a target, tracks it and designates it. Optical countermeasures against this type of systems deny the operator the possibility to fulfill this visual task. We describe the different effects that result from stimulation of the human visual system with high intensity (visible) light, and the associated potential operational impact. Of practical use are flash blindness, where an intense flash of light produces a temporary "blind-spot" in (part of) the visual field, flicker distraction, where strong intensity and/or color changes at a discomfortable frequency are produced, and disability glare where a source of light leads to contrast reduction. Hence there are three possibilities to disrupt the visual task of an operator with optical countermeasures such as flares or lasers or a combination of these; namely, by an intense flash of light, by an annoying light flicker or by a glare source. A variety of flares for this purpose is now available or under development: high intensity flash flares, continuous burning flares or strobe flares which have an oscillating intensity. The use of flare arrays seems particularly promising as an optical countermeasure. Lasers are particularly suited to interfere with human vision, because they can easily be varied in intensity, color and size, but they have to be directed at the (human) target, and issues like pointing and eye-safety have to be taken into account. Here we discuss the design issues and the operational impact of optical countermeasures against human operators.

  16. Wide field-of-view dual-band multispectral muzzle flash detection

    Science.gov (United States)

    Montoya, J.; Melchor, J.; Spiliotis, P.; Taplin, L.

    2013-06-01

    Sensor technologies are undergoing revolutionary advances, as seen in the rapid growth of multispectral methodologies. Increases in spatial, spectral, and temporal resolution, and in breadth of spectral coverage, render feasible sensors that function with unprecedented performance. A system was developed that addresses many of the key hardware requirements for a practical dual-band multispectral acquisition system, including wide field of view and spectral/temporal shift between dual bands. The system was designed using a novel dichroic beam splitter and dual band-pass filter configuration that creates two side-by-side images of a scene on a single sensor. A high-speed CMOS sensor was used to simultaneously capture data from the entire scene in both spectral bands using a short focal-length lens that provided a wide field-of-view. The beam-splitter components were arranged such that the two images were maintained in optical alignment and real-time intra-band processing could be carried out using only simple arithmetic on the image halves. An experiment related to limitations of the system to address multispectral detection requirements was performed. This characterized the system's low spectral variation across its wide field of view. This paper provides lessons learned on the general limitation of key hardware components required for multispectral muzzle flash detection, using the system as a hardware example combined with simulated multispectral muzzle flash and background signatures.

  17. Can pneumocephalus present as flashes of light? A rare case report

    Directory of Open Access Journals (Sweden)

    Santanu Ghosh

    2017-01-01

    Full Text Available Orbital emphysema and associated pneumocephalus usually result from trauma to orbital bones or due to sinus disease, allowing air to travel from paranasal sinus into orbit and brain. However, it is extremely rare to have orbital emphysema and pneumocephalus in the absence of orbital wall fracture. In our case, a young male was admitted with severe eye pain, diminution of vision due to sudden exposure of compressed air gun. Examination revealed proptosed, emphysematous right eye with conjunctival laceration. Computed tomography scan of the head and orbit revealed multiple radiolucencies with air in the right orbit and brain extending up to the spinal canal without any evidence of orbital sinus or cranial bone fracture. Visual acuity recovered completely on follow–up; however, 2 weeks following injury, the patient developed disabling flashes of light which the patient perceived as central in location and resolved finally over a period of 3 months. Flashes of light, in our case, could be attributable to unnoticed damage to cerebral vasculature or connective tissue surrounding the optic nerve due to pneumocephalus.

  18. Diffraction gratings metrology and ray-tracing results for an XUV Raman spectrometer at FLASH.

    Science.gov (United States)

    Dziarzhytski, Siarhei; Siewert, Frank; Sokolov, Andrey; Gwalt, Grzegorz; Seliger, Tino; Rübhausen, Michael; Weigelt, Holger; Brenner, Günter

    2018-01-01

    The extreme-ultraviolet double-stage imaging Raman spectrometer is a permanent experimental endstation at the plane-grating monochromator beamline branch PG1 at FLASH at DESY in Hamburg, Germany. This unique instrument covers the photon energy range from 20 to 200 eV with high energy resolution of about 2 to 20 meV (design values) featuring an efficient elastic line suppression as well as effective stray light rejection. Such a design enables studies of low-energy excitations like, for example, phonons in solids close to the vicinity of the elastic line. The Raman spectrometer effectively operates with four reflective off-axial parabolic mirrors and two plane-grating units. The optics quality and their precise alignment are crucial to guarantee best performance of the instrument. Here, results on a comprehensive investigation of the quality of the spectrometer diffraction gratings are presented. The gratings have been characterized by ex situ metrology at the BESSY-II Optics Laboratory, employing slope measuring deflectometry and interferometry as well as atomic force microscopy studies. The efficiency of these key optical elements has been measured at the at-wavelength metrology laboratory using the reflectometer at the BESSY-II Optics beamline. Also, the metrology results are discussed with respect to the expected resolving power of the instrument by including them in ray-tracing studies of the instrument.

  19. Flash Points of Secondary Alcohol and n-Alkane Mixtures.

    Science.gov (United States)

    Esina, Zoya N; Miroshnikov, Alexander M; Korchuganova, Margarita R

    2015-11-19

    The flash point is one of the most important characteristics used to assess the ignition hazard of mixtures of flammable liquids. To determine the flash points of mixtures of secondary alcohols with n-alkanes, it is necessary to calculate the activity coefficients. In this paper, we use a model that allows us to obtain enthalpy of fusion and enthalpy of vaporization data of the pure components to calculate the liquid-solid equilibrium (LSE) and vapor-liquid equilibrium (VLE). Enthalpy of fusion and enthalpy of vaporization data of secondary alcohols in the literature are limited; thus, the prediction of these characteristics was performed using the method of thermodynamic similarity. Additionally, the empirical models provided the critical temperatures and boiling temperatures of the secondary alcohols. The modeled melting enthalpy and enthalpy of vaporization as well as the calculated LSE and VLE flash points were determined for the secondary alcohol and n-alkane mixtures.

  20. PNNL 331 Building Arc Flash Team Investigation Report

    Energy Technology Data Exchange (ETDEWEB)

    Deichman, Mark L.; Drewrey, John C.; Hodges, Hurtis; Madson, Vernon J.; Minton, Allen L.; Montgomery, Daniel M.; Olson, Marvin E.; Rojas, Pedro H.; Sanan, Sanjay K.; Sharp, Reed D.; Sparks, Bobby R.; Swearingen, Gary L.

    2006-06-06

    On Friday, April 21, 2006, a PNNL electrician was performing repair of an electrical system for the 331 Building chilled water pump (CHWP) No.2, when an electrical arc flash occurred inside a 480V combination motor starter. The electrician was taken to the on-site medical provider for evaluation and was released for return to work without restriction. The electrician was not shocked, but did receive a minor, superficial (first degree) burn on the left wrist. This report, the result of a thorough review by the 331 Building Arc Flash Assessment Team, provides an in-depth look at the steps leading up to the arc-flash and recommendations and opportunities for improvement.

  1. Architectural and Integration Options for 3D NAND Flash Memories

    Directory of Open Access Journals (Sweden)

    Rino Micheloni

    2017-08-01

    Full Text Available Nowadays, NAND Flash technology is everywhere, since it is the core of the code and data storage in mobile and embedded applications; moreover, its market share is exploding with Solid-State-Drives (SSDs, which are replacing Hard Disk Drives (HDDs in consumer and enterprise scenarios. To keep the evolutionary pace of the technology, NAND Flash must scale aggressively in terms of bit cost. When approaching ultra-scaled technologies, planar NAND is hitting a wall: both academia researchers and industry worked to cope with this issue for several decades. Then, the 3D integration approach turned out to be the definitive alternative by eventually reaching mass production. This review paper exposes several 3D NAND Flash memory technologies, along with their related integration challenges, by showing their different layouts, scaling trends and performance/reliability features.

  2. Visualization on triangle concept using Adobe Flash Professional SC6

    Science.gov (United States)

    Sagita, Laela; Ratih Kusumarini, Adha

    2017-12-01

    The purpose of this paper is to develop teaching aids using Adobe Flash Professional CS6 emphasize on Triangle concept. A new alternative way to deliver a basic concept in geometry with visualization is software Adobe Flash Professional CS 6. Research method is research and development with 5 phase of Ploom’s model, namely (1) preliminary, (2) design, (3) realization/ construction, (4) test, evaluation and revision, and 5) implementation. The results showed that teaching aids was valid, practice, and effective. Validity: expert judgement for material score is 3.95 and media expert judgement produce an average score of 3,2, both in the category are valid. Practically: the average of questionnaire response is 4,04 (good). Effectiveness: n-gain test value is 0,36 (medium). It concluded that developed of teaching aids using Adobe Flash CS6 on triangle can improve student achievement.

  3. Boiling water reactor stability revisited: The effects of flashing

    Energy Technology Data Exchange (ETDEWEB)

    Yadigaroglu, G. [Institute of Energy Technology, Swiss Federal Institute of Technology, ETH, ETH-Zentrum, CLT-C1, CH-8092 Zurich (Switzerland)]. E-mail: yadi@ethz.ch; Askari, B. [Institute of Energy Technology, Swiss Federal Institute of Technology, ETH, ETH-Zentrum, CLT-C1, CH-8092 Zurich (Switzerland)

    2005-05-01

    There are numerous investigations of two-phase flow stability with particular emphasis to BWR stability; these have become increasingly sophisticated and complete over the years. The basic features of a new development and frequency-domain code capable of considering all the channels (bundles) in a BWR, flashing of the coolant at low pressure, full coupling with 3D, two-group neutronics, etc. are described. The basic thermal-hydraulic model is used to study the effects of flashing on stability in a BWR-like channel. The behavior of the channel is highly dynamic. Contrary to what could have been intuitively guessed, the effect of flashing is stabilizing; the reasons and mechanisms leading to this are discussed.

  4. Boiling water reactor stability revisited: The effects of flashing

    International Nuclear Information System (INIS)

    Yadigaroglu, G.; Askari, B.

    2005-01-01

    There are numerous investigations of two-phase flow stability with particular emphasis to BWR stability; these have become increasingly sophisticated and complete over the years. The basic features of a new development and frequency-domain code capable of considering all the channels (bundles) in a BWR, flashing of the coolant at low pressure, full coupling with 3D, two-group neutronics, etc. are described. The basic thermal-hydraulic model is used to study the effects of flashing on stability in a BWR-like channel. The behavior of the channel is highly dynamic. Contrary to what could have been intuitively guessed, the effect of flashing is stabilizing; the reasons and mechanisms leading to this are discussed

  5. Flash Flood Type Identification within Catchments in Beijing Mountainous Area

    Science.gov (United States)

    Nan, W.

    2017-12-01

    Flash flood is a common type of disaster in mountainous area, Flash flood with the feature of large flow rate, strong flushing force, destructive power, has periodically caused loss to life and destruction to infrastructure in mountainous area. Beijing as China's political, economic and cultural center, the disaster prevention and control work in Beijing mountainous area has always been concerned widely. According to the transport mechanism, sediment concentration and density, the flash flood type identification within catchment can provide basis for making the hazards prevention and mitigation policy. Taking Beijing as the study area, this paper extracted parameters related to catchment morphological and topography features respectively. By using Bayes discriminant, Logistic regression and Random forest, the catchments in Beijing mountainous area were divided into water floods process, fluvial sediment transport process and debris flows process. The results found that Logistic regression analysis showed the highest accuracy, with the overall accuracy of 88.2%. Bayes discriminant and Random forest had poor prediction effects. This study confirmed the ability of morphological and topography features to identify flash flood process. The circularity ratio, elongation ratio and roughness index can be used to explain the flash flood types effectively, and the Melton ratio and elevation relief ratio also did a good job during the identification, whereas the drainage density seemed not to be an issue at this level of detail. Based on the analysis of spatial patterns of flash flood types, fluvial sediment transport process and debris flow process were the dominant hazards, while the pure water flood process was much less. The catchments dominated by fluvial sediment transport process were mainly distributed in the Yan Mountain region, where the fault belts were relatively dense. The debris flow process prone to occur in the Taihang Mountain region thanks to the abundant

  6. Fenomena Kerak Dalam Desalinasi Dengan Multi Stage Flash Distillation (Msf)

    OpenAIRE

    Alimah, Siti

    2006-01-01

    SCALING PHENOMENA IN DESALINATION WITH MULTI STAGE FLASH DISTILLATION (MSF). Assessment of scaling phenomena in MSF desalination has been carried out. Scale is one of predominantly problem in multi stage flash (MSF) desalination installation. The main types of scale in MSF are carbonat calcium (CaC03), hydroxide magnesium (Mg(OH)2) dan sulphate calcium (CaS04). CaC03 dan Mg(OH)2 scales result from the thermal decomposition of bicarbonate ion, however sulphate calcium scale result from reactio...

  7. Inception and development of voids in flashing liquids

    International Nuclear Information System (INIS)

    Jones, O.C. Jr.

    1979-06-01

    Recent work aimed at correctly describing nonequilibrium vapor generation rates in flashing liquids in decompressing flows similar to those which might be encountered in a loss of coolant accident in a nuclear reactor is summarized. Analysis is reviewed which describes the flashing inception superheat in terms of the turbulence intensity for a given expansion rate and initial temperature, and interfacial area density and interfacial heat flux, and the volumetric vapor generation rates. Comparisons with existing data are included and further experiments being undertaken are described, including typical recent results

  8. Effect of Soybeans on Hot Flashes in Postmenopausal Women

    Directory of Open Access Journals (Sweden)

    H Mozaffari-khosravi

    2009-10-01

    Full Text Available Introduction: Hot flashes are common and discomfortable signs of menopause that present with blazing sweatiness, sense of hotness, tachycardia and agitation. Hot flashes cause disturbances in daily activity and quality of night sleep. In spite of the effect of Hormone Replacement Therapy (HRT on hot flashes, nowadays, there are diverse opinions about HRT and the reason is that it has chronic complications. In addition, the acceptance of HRT by Iranian women is very low. Study of numerous texts has shown that isofliavone present in soybean is a phytoestrogen that could be effective in control of hot flashes. The purpose of the study is to examine the changes in time periods of hot flashes in response to consumption of 74 mg Isoflavone/day present in 60 grams soybeans in menopausal women. Methods: This study was a clinical trial with before and after design that included 31 postmenopausal women. The participants were assessed with respect to daily hot flashes at baseline and after one, two and three months of intervention. Participants consumed daily 60 grams soybeans for 3 months. Blood samples were taken at the start and end of intervention for determining levels of gonadotropins and estradiol. Data was analyzed by SPSS software. Results: There was a decrease in time period of hot flashes from baseline of 5.88±2.61 to 3.45±1.82 after one month, 2.73±1.57 after two months and 2.16±1.48 after three months of consumption of soybeans (P<0.001. There was decrease in levels of FSH, LH & estradiol after 3 months, but this decrease was not significant, except in the case of estradiol. Conclusion: In line with various studies proposing the use of soybeans in the form of concentrate, drink or capsule, this study suggests that consumption of soybeans (60 gr daily as snacks may be a safe and effective method for controlling hot flashes in postmenopausal women..

  9. Optics/Optical Diagnostics Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Optics/Optical Diagnostics Laboratory supports graduate instruction in optics, optical and laser diagnostics and electro-optics. The optics laboratory provides...

  10. Flash 3D Planetary Entry, Descent and Landing Sensor Hardening Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a 128 x 128 frame, 3D Flash LADAR video camera which produces 3-D point clouds at 30 Hz. Flash Ladar Video...

  11. Development of a 3D Flash LADAR Video Camera for Entry, Decent and Landing, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a 128 x 128 frame, 3D Flash LADAR video camera capable of a 30 Hz frame rate. Because Flash LADAR captures an...

  12. Development of a 3D Flash LADAR Video Camera for Entry, Decent, and Landing, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a 128 x 128 frame, 3D Flash LADAR video camera which produces 3-D point clouds at 30 Hz. Flash LADAR captures...

  13. Development of PIN Diode Detector Arrays for 3D Flash LIDAR Space Applications, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a number of 3D Flash LIDAR systems. Flash LIDAR sensors are 3D video systems that return range and intensity...

  14. Flash 3D Planetary Entry, Descent and Landing Sensor Hardening, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts Inc. (ASC) is a small business that has developed a number of 3D flash LADAR systems. Flash Ladar Video Cameras are 3D video cameras...

  15. Brilliant GeV gamma-ray flash from inverse Compton scattering in the QED regime

    Science.gov (United States)

    Gong, Z.; Hu, R. H.; Lu, H. Y.; Yu, J. Q.; Wang, D. H.; Fu, E. G.; Chen, C. E.; He, X. T.; Yan, X. Q.

    2018-04-01

    An all-optical scheme is proposed for studying laser plasma based incoherent photon emission from inverse Compton scattering in the quantum electrodynamic regime. A theoretical model is presented to explain the coupling effects among radiation reaction trapping, the self-generated magnetic field and the spiral attractor in phase space, which guarantees the transfer of energy and angular momentum from electromagnetic fields to particles. Taking advantage of a prospective ∼ 1023 W cm‑2 laser facility, 3D particle-in-cell simulations show a gamma-ray flash with unprecedented multi-petawatt power and brightness of 1.7 × 1023 photons s‑1 mm‑2 mrad‑2/0.1% bandwidth (at 1 GeV). These results bode well for new research directions in particle physics and laboratory astrophysics exploring laser plasma interactions.

  16. Robust Image Denoising using a Virtual Flash Image for Monte Carlo Ray Tracing

    DEFF Research Database (Denmark)

    Moon, Bochang; Jun, Jong Yun; Lee, JongHyeob

    2013-01-01

    We propose an efficient and robust image-space denoising method for noisy images generated by Monte Carlo ray tracing methods. Our method is based on two new concepts: virtual flash images and homogeneous pixels. Inspired by recent developments in flash photography, virtual flash images emulate...

  17. An Effective Approach to Flash Vacuum Thermolytic Studies

    DEFF Research Database (Denmark)

    Carlsen, Lars; Egsgaard, Helge

    1980-01-01

    Flash vacuum thermolysis in combination with field ionization mass spectrometry, supplementary with collision activated spectra of the single field ionized molecules, is shown to be a facile and highly informative method for studying even very complex mixtures of primarily formed products...

  18. Recovery of Flash Memories for Reliable Mobile Storages

    Directory of Open Access Journals (Sweden)

    Daesung Moon

    2010-01-01

    Full Text Available As the mobile appliance is applied to many ubiquitous services and the importance of the information stored in it is increased, the security issue to protect the information becomes one of the major concerns. However, most previous researches focused only on the communication security, not the storage security. Especially, a flash memory whose operational characteristics are different from those of HDD is used increasingly as a storage device for the mobile appliance because of its resistance to physical shock and lower power requirement. In this paper, we propose a flash memory management scheme targeted for guaranteeing the data integrity of the mobile storage. By maintaining the old data specified during the recovery window, we can recover the old data when the mobile appliance is attacked. Also, to reduce the storage requirement for the recovery, we restrict the number of versions to be copied, called Degree of Integrity (DoI. Especially, we consider both the reclaim efficiency and the wear leveling which is a unique characteristic of the flash memory. Based on the performance evaluation, we confirm that the proposed scheme can be acceptable to many applications as a flash memory management scheme for improving data integrity.

  19. Normalized Temperature Contrast Processing in Flash Infrared Thermography

    Science.gov (United States)

    Koshti, Ajay M.

    2016-01-01

    The paper presents further development in normalized contrast processing of flash infrared thermography method by the author given in US 8,577,120 B1. The method of computing normalized image or pixel intensity contrast, and normalized temperature contrast are provided, including converting one from the other. Methods of assessing emissivity of the object, afterglow heat flux, reflection temperature change and temperature video imaging during flash thermography are provided. Temperature imaging and normalized temperature contrast imaging provide certain advantages over pixel intensity normalized contrast processing by reducing effect of reflected energy in images and measurements, providing better quantitative data. The subject matter for this paper mostly comes from US 9,066,028 B1 by the author. Examples of normalized image processing video images and normalized temperature processing video images are provided. Examples of surface temperature video images, surface temperature rise video images and simple contrast video images area also provided. Temperature video imaging in flash infrared thermography allows better comparison with flash thermography simulation using commercial software which provides temperature video as the output. Temperature imaging also allows easy comparison of surface temperature change to camera temperature sensitivity or noise equivalent temperature difference (NETD) to assess probability of detecting (POD) anomalies.

  20. Measuring and Estimating Normalized Contrast in Infrared Flash Thermography

    Science.gov (United States)

    Koshti, Ajay M.

    2013-01-01

    Infrared flash thermography (IRFT) is used to detect void-like flaws in a test object. The IRFT technique involves heating up the part surface using a flash of flash lamps. The post-flash evolution of the part surface temperature is sensed by an IR camera in terms of pixel intensity of image pixels. The IR technique involves recording of the IR video image data and analysis of the data using the normalized pixel intensity and temperature contrast analysis method for characterization of void-like flaws for depth and width. This work introduces a new definition of the normalized IR pixel intensity contrast and normalized surface temperature contrast. A procedure is provided to compute the pixel intensity contrast from the camera pixel intensity evolution data. The pixel intensity contrast and the corresponding surface temperature contrast differ but are related. This work provides a method to estimate the temperature evolution and the normalized temperature contrast from the measured pixel intensity evolution data and some additional measurements during data acquisition.

  1. Method and apparatus for flash evaporation of liquids

    Science.gov (United States)

    Bharathan, Desikan

    1984-01-01

    A vertical tube flash evaporator for introducing a superheated liquid into a flash evaporation chamber includes a vertical inlet tube with a flared diffuser portion at its upper outlet end. A plurality of annular screens are positioned in axially spaced-apart relation to each other around the periphery of the vertical tube and below the diffuser portion thereof. The screens are preferably curved upward in a cup-shaped configuration. These flash evaporators are shown in an ocean thermal energy conversion unit designed for generating electric power from differential temperature gradients in ocean water. The method of use of the flash evaporators of this invention includes flowing liquid upwardly through the vertical tube into the diffuser where initial expansion and boiling occurs quite violently and explosively. Unvaporized liquid sheets and drops collide with each other to enhance surface renewal and evaporation properties, and liquid flowing over the outlet end of the diffuser falls onto the curved screens for further surface renewal and evaporation.

  2. Portable flash x-ray systems: applications and techniques

    International Nuclear Information System (INIS)

    Bryant, L.E. Jr.

    1976-01-01

    Three energies of portable flash x-ray equipment are described, and applications such as jetting and high explosive studies, bullet impact and casting of lead experiments are given as well as techniques for triggering and protection of equipment and film

  3. Implementation of Power Efficient Flash Analogue-to-Digital Converter

    Directory of Open Access Journals (Sweden)

    Taninki Sai Lakshmi

    2014-01-01

    Full Text Available An efficient low power high speed 5-bit 5-GS/s flash analogue-to-digital converter (ADC is proposed in this paper. The designing of a thermometer code to binary code is one of the exacting issues of low power flash ADC. The embodiment consists of two main blocks, a comparator and a digital encoder. To reduce the metastability and the effect of bubble errors, the thermometer code is converted into the gray code and there after translated to binary code through encoder. The proposed encoder is thus implemented by using differential cascade voltage switch logic (DCVSL to maintain high speed and low power dissipation. The proposed 5-bit flash ADC is designed using Cadence 180 nm CMOS technology with a supply rail voltage typically ±0.85 V. The simulation results include a total power dissipation of 46.69 mW, integral nonlinearity (INL value of −0.30 LSB and differential nonlinearity (DNL value of −0.24 LSB, of the flash ADC.

  4. Visual reinforcement audiometry: an Adobe Flash based approach.

    Science.gov (United States)

    Atherton, Steve

    2010-09-01

    Visual Reinforcement Audiometry (VRA) is a key behavioural test for young children. It is central to the diagnosis of hearing-impaired infants (1) . Habituation to the visual reinforcement can give misleading results. Medical Illustration ABM University Health Board has designed a collection of Flash animations to overcome this.

  5. Collecting response times using Amazon Mechanical Turk and Adobe Flash.

    Science.gov (United States)

    Simcox, Travis; Fiez, Julie A

    2014-03-01

    Crowdsourcing systems like Amazon's Mechanical Turk (AMT) allow data to be collected from a large sample of people in a short amount of time. This use has garnered considerable interest from behavioral scientists. So far, most experiments conducted on AMT have focused on survey-type instruments because of difficulties inherent in running many experimental paradigms over the Internet. This study investigated the viability of presenting stimuli and collecting response times using Adobe Flash to run ActionScript 3 code in conjunction with AMT. First, the timing properties of Adobe Flash were investigated using a phototransistor and two desktop computers running under several conditions mimicking those that may be present in research using AMT. This experiment revealed some strengths and weaknesses of the timing capabilities of this method. Next, a flanker task and a lexical decision task implemented in Adobe Flash were administered to participants recruited with AMT. The expected effects in these tasks were replicated. Power analyses were conducted to describe the number of participants needed to replicate these effects. A questionnaire was used to investigate previously undescribed computer use habits of 100 participants on AMT. We conclude that a Flash program in conjunction with AMT can be successfully used for running many experimental paradigms that rely on response times, although experimenters must understand the limitations of the method.

  6. Emotional Semantic Recognition of Visual Scene in Flash Animation

    Directory of Open Access Journals (Sweden)

    Shi Lin

    2018-01-01

    Full Text Available Based on the organization structure of the Flash animation files, we first use the edge density method to segment the Flash animation to obtain the visual scenes, then extract the visual features such as color and texture as the input parameters of BP neural network, and set up the sample database. Secondly, we choose a suitable model for emotion classification, use eight kinds of emotional adjectives to describe the emotion of Flash animation, such as warm, delightful, exaggerated, funny, desolate, dreary, complex, and illusory, and mark the emotion value of the visual scene in the sample database and so use it as the output parameter of the BP neural network. Finally, we use BP neural network with appropriate transfer function and learning function for training to obtain the rules for mapping from visual features of the visual scene to semantic space and, at last, complete the automatic classification work of emotional semantic of the visual scene. We used the algorithm to carry on the emotional semantics recognition to 5012 visual scenes, and the experiment effect is good. The results of our study can be used in the classification, retrieval, and other fields of Flash animation based on emotional semantics.

  7. RAND-Based Formulations for Isothermal Multiphase Flash

    DEFF Research Database (Denmark)

    Paterson, Duncan; Michelsen, Michael L.; Stenby, Erling H.

    2018-01-01

    Two algorithms are proposed for isothermal multiphase flash. These are referred to as modified RAND and vol-RAND. The former uses the chemical potentials and molar-phase amounts as the iteration variables, while the latter uses chemical potentials and phase volumes to cosolve a pressure...

  8. Flash release - an alternative for releasing complex mems devices

    NARCIS (Netherlands)

    Deladi, S.; Svetovoy, Vitaly; Krijnen, Gijsbertus J.M.; Elwenspoek, Michael Curt

    2004-01-01

    A novel time-saving and cost-effective release technique has been developed and is described. The physical nature of the process is explained in combination with experimental observations. The results of the flash release process are compared with those of freeze-drying and supercritical CO2

  9. Flash release an alternative for releasing complex MEMS devices

    NARCIS (Netherlands)

    Deladi, S.; Krijnen, Gijsbertus J.M.; Elwenspoek, Michael Curt

    2004-01-01

    A novel time-saving and cost-effective release technique has been developed and is described. The physical nature of the process is explained in combination with experimental observations. The results of the flash release process are compared with those of freeze-drying and supercritical CO2

  10. High-frequency Trading, Algorithmic Finance, and the Flash Crash

    DEFF Research Database (Denmark)

    Borch, Christian

    2016-01-01

    automated trading algorithms are prone to run amok in unanticipated frenzy. In this paper, I discuss how and why the Flash Crash is being invoked as a significant event in debates about high-frequency trading and algo-financial markets. I analyse the mediatization of the event, as well as the variety...... about resonance in quantitative finance....

  11. Flash-flood potential assessment and mapping by integrating the ...

    Indian Academy of Sciences (India)

    Romulus Costache

    2017-06-16

    Jun 16, 2017 ... A basic step in flood risk management is identifying areas susceptible to flood occurrences. This paper proposes a methodology ... river channels and flood wave propagation from the upper area of the basin to the lower ... to improve the quality of flash-flood forecasts. Four geographical variables (slope ...

  12. Direct Observations of Different Sunspot Waves Influenced by Umbral Flashes

    Science.gov (United States)

    Sharma, Aishawnnya; Gupta, G. R.; Tripathi, Durgesh; Kashyap, V.; Pathak, Amit

    2017-12-01

    We report the simultaneous presence of chromospheric umbral flashes and associated umbral waves, and propagating coronal disturbances, in a sunspot and related active region. We have analyzed time-distance maps obtained using the observations from the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory. These maps show the simultaneous occurrence of different sunspot oscillations and waves such as umbral flashes, umbral waves, and coronal waves. Analysis of the original light curves, i.e., without implementing any Fourier filtering on them, shows that the amplitudes of different sunspot waves observed at different atmospheric layers change in synchronization with the light curves obtained from the umbral flash region, thus demonstrating that these oscillations are modulated by umbral flashes. This study provides the first observational evidence of the influence of sunspot oscillations within the umbra on other sunspot waves extending up to the corona. The properties of these waves and oscillations can be utilized to study the inherent magnetic coupling among different layers of the solar atmosphere above sunspots.

  13. Anomalous electric field changes and high flash rate beneath a ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Earth System Science; Volume 119; Issue 5. Anomalous electric field changes and high flash rate beneath a thunderstorm in northeast India ... Further,all electric field changes after a lightning discharge indicates the presence of strong Lower Positive Charge Centers (LPCC)in the active and ...

  14. Development of uTCA Hardware for BAM system at FLASH and XFEL

    CERN Document Server

    Habib, S B; Szewinski, J; Korolczuk, S

    2012-01-01

    This paper describes the design of a uTCA modular card system suited for conversion, sampling and processing of optical pulses. The system consists of a uTCA carrier card along with a double width FPGA Mezzanine Card (FMC) with a changeable optical frontend. The cards were designed for the needs of the BAM system of the FLASH and XFEL accelerators at the DESY facility in Hamburg. The carrier board contains a very powerful FPGA, all required uTCA circuits along with digital interfaces. The FMC card mainly contains four 16-bit fast Analog-to-digital converters (up to 250 MSPS), ADC clock generation and distribution modules, two SFP connectors and a specialized dual RS-485 connection. This paper describes such issues as system organization into universal digital circuits and specialized analog and clock circuits to allow high speed real-time analysis of the properties of thehigh-bandwidth optical signals of the BAM system and better control of the accelerator beam.

  15. Machine protection for FLASH and the European XFEL

    International Nuclear Information System (INIS)

    Froehlich, Lars

    2009-05-01

    The Free-Electron Laser in Hamburg (FLASH) and the future European X-Ray Free-Electron Laser (XFEL) are sources of brilliant extremeultraviolet and X-ray radiation pulses. Both facilities are based on superconducting linear accelerators (linacs) that can produce and transport electron beams of high average power. With up to 90 kW or up to 600 kW of power, respectively, these beams hold a serious potential to damage accelerator components. This thesis discusses several passive and active machine protection measures needed to ensure safe operation. At FLASH, dark current from the rf gun electron source has activated several accelerator components to unacceptable radiation levels. Its transport through the linac is investigated with detailed tracking simulations using a parallelized and enhanced version of the tracking code Astra; possible remedies are evaluated. Beam losses can lead to the demagnetization of permanent magnet insertion devices. A number of beam loss scenarios typical for FLASH are investigated with shower simulations. A shielding setup is designed and its efficiency is evaluated. For the design parameters of FLASH, it is concluded that the average relative beam loss in the undulators must be controlled to a level of about 10 -8 . FLASH is equipped with an active machine protection system (MPS) comprising more than 80 photomultiplier-based beam loss monitors and several subsystems. The maximum response time to beam losses is less than 4 μs. Setup procedures and calibration algorithms for MPS subsystems and components are introduced and operational problems are addressed. Finally, an architecture for a fully programmable machine protection system for the XFEL is presented. Several options for the topology of this system are reviewed, with the result that an availability goal of at least 0.999 for the MPS is achievable with moderate hardware requirements. (orig.)

  16. Machine protection for FLASH and the European XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, Lars

    2009-05-15

    The Free-Electron Laser in Hamburg (FLASH) and the future European X-Ray Free-Electron Laser (XFEL) are sources of brilliant extremeultraviolet and X-ray radiation pulses. Both facilities are based on superconducting linear accelerators (linacs) that can produce and transport electron beams of high average power. With up to 90 kW or up to 600 kW of power, respectively, these beams hold a serious potential to damage accelerator components. This thesis discusses several passive and active machine protection measures needed to ensure safe operation. At FLASH, dark current from the rf gun electron source has activated several accelerator components to unacceptable radiation levels. Its transport through the linac is investigated with detailed tracking simulations using a parallelized and enhanced version of the tracking code Astra; possible remedies are evaluated. Beam losses can lead to the demagnetization of permanent magnet insertion devices. A number of beam loss scenarios typical for FLASH are investigated with shower simulations. A shielding setup is designed and its efficiency is evaluated. For the design parameters of FLASH, it is concluded that the average relative beam loss in the undulators must be controlled to a level of about 10{sup -8}. FLASH is equipped with an active machine protection system (MPS) comprising more than 80 photomultiplier-based beam loss monitors and several subsystems. The maximum response time to beam losses is less than 4 {mu}s. Setup procedures and calibration algorithms for MPS subsystems and components are introduced and operational problems are addressed. Finally, an architecture for a fully programmable machine protection system for the XFEL is presented. Several options for the topology of this system are reviewed, with the result that an availability goal of at least 0.999 for the MPS is achievable with moderate hardware requirements. (orig.)

  17. Menopausal Hot Flashes and Carotid Intima Media Thickness Among Midlife Women.

    Science.gov (United States)

    Thurston, Rebecca C; Chang, Yuefang; Barinas-Mitchell, Emma; Jennings, J Richard; Landsittel, Doug P; Santoro, Nanette; von Känel, Roland; Matthews, Karen A

    2016-12-01

    There has been a longstanding interest in the role of menopause and its correlates in the development of cardiovascular disease (CVD) in women. Menopausal hot flashes are experienced by most midlife women; emerging data link hot flashes to CVD risk indicators. We tested whether hot flashes, measured via state-of-the-art physiologic methods, were associated with greater subclinical atherosclerosis as assessed by carotid ultrasound. We considered the role of CVD risk factors and estradiol concentrations in these associations. A total of 295 nonsmoking women free of clinical CVD underwent ambulatory physiologic hot flash assessments; a blood draw; and carotid ultrasound measurement of intima media thickness and plaque. Associations between hot flashes and subclinical atherosclerosis were tested in regression models controlling for CVD risk factors and estradiol. More frequent physiologic hot flashes were associated with higher carotid intima media thickness (for each additional hot flash: β [SE]=0.004 [0.001]; P=0.0001; reported hot flash: β [SE]=0.008 [0.002]; P=0.002, multivariable) and plaque (eg, for each additional hot flash, odds ratio [95% confidence interval] plaque index ≥2=1.07 [1.003-1.14]; P=0.04, relative to no plaque, multivariable] among women reporting daily hot flashes; associations were not accounted for by CVD risk factors or by estradiol. Among women reporting hot flashes, hot flashes accounted for more variance in intima media thickness than most CVD risk factors. Among women reporting daily hot flashes, frequent hot flashes may provide information about a woman's vascular status beyond standard CVD risk factors and estradiol. Frequent hot flashes may mark a vulnerable vascular phenotype among midlife women. © 2016 American Heart Association, Inc.

  18. Spatial-temporal characteristics of lightning flash size in a supercell storm

    Science.gov (United States)

    Zhang, Zhixiao; Zheng, Dong; Zhang, Yijun; Lu, Gaopeng

    2017-11-01

    The flash sizes of a supercell storm, in New Mexico on October 5, 2004, are studied using the observations from the New Mexico Lightning Mapping Array and the Albuquerque, New Mexico, Doppler radar (KABX). First, during the temporal evolution of the supercell, the mean flash size is anti-correlated with the flash rate, following a unary power function, with a correlation coefficient of - 0.87. In addition, the mean flash size is linearly correlated with the area of reflectivity > 30 dBZ at 5 km normalized by the flash rate, with a correlation coefficient of 0.88. Second, in the horizontal, flash size increases along the direction from the region near the convection zone to the adjacent forward anvil. The region of minimum flash size usually corresponds to the region of maximum flash initiation and extent density. The horizontal correspondence between the mean flash size and the flash extent density can also be fitted by a unary power function, and the correlation coefficient is > 0.5 in 50% of the radar volume scans. Furthermore, the quality of fit is positively correlated to the convective intensity. Third, in the vertical direction, the height of the maximum flash initiation density is close to the height of maximum flash extent density, but corresponds to the height where the mean flash size is relatively small. In the discussion, the distribution of the small and dense charge regions when and where convection is vigorous in the storm, is deduced to be responsible for the relationship that flash size is temporally and spatially anti-correlated with flash rate and density, and the convective intensity.

  19. On the chlorophill a fluorescence yield in chloroplasts upon excitation with twin turnover flashes (TTF) and high frequency flash trains

    NARCIS (Netherlands)

    Vredenberg, W.J.; Prasil, O.; Durchan, M.

    2007-01-01

    Chlorophyll fluorescence is routinely taken as a quantifiable measure of the redox state of the primary quinone acceptor QA of PSII. The variable fluorescence in thylakoids increases in a single turnover flash (STF) from its low dark level F o towards a maximum F mSTF when QA becomes reduced. We

  20. Randomized Trial of a Hypnosis Intervention for Treatment of Hot Flashes Among Breast Cancer Survivors

    Science.gov (United States)

    Elkins, Gary; Marcus, Joel; Stearns, Vered; Perfect, Michelle; Rajab, M. Hasan; Ruud, Christopher; Palamara, Lynne; Keith, Timothy

    2008-01-01

    Purpose Hot flashes are a significant problem for many breast cancer survivors. Hot flashes can cause discomfort, disrupted sleep, anxiety, and decreased quality of life. A well-tolerated and effective mind-body treatment for hot flashes would be of great value. On the basis of previous case studies, this study was developed to evaluate the effect of a hypnosis intervention for hot flashes. Patients and Methods Sixty female breast cancer survivors with hot flashes were randomly assigned to receive hypnosis intervention (five weekly sessions) or no treatment. Eligible patients had to have a history of primary breast cancer without evidence of detectable disease and 14 or more weekly hot flashes for at least 1 month. The major outcome measure was a bivariate construct that represented hot flash frequency and hot flash score, which was analyzed by a classic sums and differences comparison. Secondary outcome measures were self-reports of interference of hot flashes on daily activities. Results Fifty-one randomly assigned women completed the study. By the end of the treatment period, hot flash scores (frequency × average severity) decreased 68% from baseline to end point in the hypnosis arm (P hypnosis intervention (P Hypnosis appears to reduce perceived hot flashes in breast cancer survivors and may have additional benefits such as reduced anxiety and depression, and improved sleep. PMID:18809612

  1. Evaluating a flash size and energy dissipation relationship through various modeling techniques

    Science.gov (United States)

    Salinas, V.; Brothers, M.; Bruning, E. C.; Mansell, E.

    2017-12-01

    Many studies have investigated the influence of the electrostatic and kinematic environments of thunderstorms on lightning flash size. Recent work has demonstrated a coupling of turbulent kinematic properties to flash size distribution in different regions of a storm. Additional work has also theorized a relationship of flash size and energy to the TKE spectrum. However, the physical basis for using flash size alone in these estimates remains absent. This study used the National Severe Storms Laboratory's Collaborative Model for Multiscale Atmospheric Simulation model (N-COMMAS) to simulate an observed multicellular thunderstorm to investigate the relationship between flash size and energy. Model output included the total energy dissipated for each flash, and the charge, electric potential, electric field where it propagated. These flashes were then modeled in two simplified ways. First, each flash was assumed to be convex hull volumes of charge. A 3D Poisson solver was then used on each charge volume for charge density retrieval and computation of the electric potential, using a theoretical electric field breakeven threshold and charge conservation. Second, a capacitor model was used to estimate the energy dissipated using flash area, charge, and plate spacing obtained from the COMMAS model. These two calculations of flash energy were compared to the COMMAS energy. The results suggested that flash size alone was insufficient in characterizing the energetic properties.

  2. Flash memory management system and method utilizing multiple block list windows

    Science.gov (United States)

    Chow, James (Inventor); Gender, Thomas K. (Inventor)

    2005-01-01

    The present invention provides a flash memory management system and method with increased performance. The flash memory management system provides the ability to efficiently manage and allocate flash memory use in a way that improves reliability and longevity, while maintaining good performance levels. The flash memory management system includes a free block mechanism, a disk maintenance mechanism, and a bad block detection mechanism. The free block mechanism provides efficient sorting of free blocks to facilitate selecting low use blocks for writing. The disk maintenance mechanism provides for the ability to efficiently clean flash memory blocks during processor idle times. The bad block detection mechanism provides the ability to better detect when a block of flash memory is likely to go bad. The flash status mechanism stores information in fast access memory that describes the content and status of the data in the flash disk. The new bank detection mechanism provides the ability to automatically detect when new banks of flash memory are added to the system. Together, these mechanisms provide a flash memory management system that can improve the operational efficiency of systems that utilize flash memory.

  3. Adobe Flash as a medium for online experimentation: a test of reaction time measurement capabilities.

    Science.gov (United States)

    Reimers, Stian; Stewart, Neil

    2007-08-01

    Adobe Flash can be used to run complex psychological experiments over the Web. We examined the reliability of using Flash to measure reaction times (RTs) using a simple binary-choice task implemented both in Flash and in a Linux-based system known to record RTs with millisecond accuracy. Twenty-four participants were tested in the laboratory using both implementations; they also completed the Flash version on computers of their own choice outside the lab. RTs from the trials run on Flash outside the lab were approximately 20 msec slower than those from trials run on Flash in the lab, which in turn were approximately 10 msec slower than RTs from the trials run on the Linux-based system (baseline condition). RT SDs were similar in all conditions, suggesting that although Flash may overestimate RTs slightly, it does not appear to add significant noise to the data recorded.

  4. Measurement and analysis of coherent synchrotron radiation effects at FLASH

    International Nuclear Information System (INIS)

    Beutner, B.

    2007-12-01

    The vacuum-ultra-violet Free Electron Laser in Hamburg (FLASH) is a linac driven SASE-FEL. High peak currents are produced using magnetic bunch compression chicanes. In these magnetic chicanes, the energy distribution along an electron bunch is changed by eff ects of Coherent Synchrotron Radiation (CSR). Energy changes in dispersive bunch compressor chicanes lead to transverse displacements along the bunch. These CSR induced displacements are studied using a transverse deflecting RF-structure. Experiments and simulations concerning the charge dependence of such transverse displacements are presented and analysed. In these experiments an over-compression scheme is used which reduces the peak current downstream the bunch compressor chicanes. Therefore other self interactions like space charge forces which might complicate the measurements are suppressed. Numerical simulations are used to analyse the beam dynamics under the influence of CSR forces. The results of these numerical simulations are compared with the data obtained in the over-compression experiments at FLASH. (orig.)

  5. Measurement and analysis of coherent synchrotron radiation effects at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Beutner, B.

    2007-12-15

    The vacuum-ultra-violet Free Electron Laser in Hamburg (FLASH) is a linac driven SASE-FEL. High peak currents are produced using magnetic bunch compression chicanes. In these magnetic chicanes, the energy distribution along an electron bunch is changed by eff ects of Coherent Synchrotron Radiation (CSR). Energy changes in dispersive bunch compressor chicanes lead to transverse displacements along the bunch. These CSR induced displacements are studied using a transverse deflecting RF-structure. Experiments and simulations concerning the charge dependence of such transverse displacements are presented and analysed. In these experiments an over-compression scheme is used which reduces the peak current downstream the bunch compressor chicanes. Therefore other self interactions like space charge forces which might complicate the measurements are suppressed. Numerical simulations are used to analyse the beam dynamics under the influence of CSR forces. The results of these numerical simulations are compared with the data obtained in the over-compression experiments at FLASH. (orig.)

  6. uFLIP: Understanding the Energy Consumption of Flash Devices

    DEFF Research Database (Denmark)

    Bjørling, Matias; Bonnet, Philippe; Bouganim, Luc

    2010-01-01

    consumption (low power consumption in idle mode, average Watt consumption from the data sheets). Second, when measured at a sufficiently fine granularity, the energy consumption of a given device might complement the performance characteristics derived from its response time profile. Indeed, background work......Understanding the energy consumption of flash devices is important for two reasons. First, energy is emerging as a key metric for data management systems. It is thus important to understand how we can reason about the energy consumption of flash devices beyond their approximate aggregate...... which is not directly observable with a response time profile appears clearly when energy is used as a metric. In this paper, we discuss the results from the {uFLIP} benchmark applied to four different {SSD} devices using both response time and energy as metric....

  7. Biodiesel Production by Reactive Flash: A Numerical Simulation

    Directory of Open Access Journals (Sweden)

    Alejandro Regalado-Méndez

    2016-01-01

    Full Text Available Reactive flash (RF in biodiesel production has been studied in order to investigate steady-state multiplicities, singularities, and effect of biodiesel quality when the RF system approaches to bubble point. The RF was modeled by an index-2 system of differential algebraic equations, the vapor split (ϕ was computed by modified Rachford-Rice equation and modified Raoult’s law computed bubble point, and the continuation analysis was tracked on MATCONT. Results of this study show the existence of turning points, leading to a unique bubble point manifold, (xBiodiesel,T=(0.46,478.41 K, which is a globally stable flashing operation. Also, the results of the simulation in MATLAB® of the dynamic behavior of the RF show that conversion of triglycerides reaches 97% for a residence time of 5.8 minutes and a methanol to triglyceride molar flow ratio of 5 : 1.

  8. Visualizing Library Statistics using Open Flash Chart 2 and Drupal

    Directory of Open Access Journals (Sweden)

    Laura K. Wiegand

    2013-01-01

    Full Text Available Libraries continue to need to demonstrate their value to stakeholders, and while statistics alone do not represent value, they are an important element. We found ourselves, and our stakeholders, uninspired by our infrequently updated bulleted list of statistics on our website and so set out to create a more dynamic and visually appealing look at our statistics. This article outlines how we used our content management system, Drupal, Open Flash Chart and custom programming to convert library statistics into Flash charts, including how to populate the graphs with dynamic data from external sources. The end result is our Library Statistics Dashboard (http://library.uncw.edu/facts_planning/dashboard that visually demonstrates the use, activity and resources in the library via interactive and visually interesting graphs.

  9. What SWIFT has taught us about X-ray flashes and long-duration gamma-ray bursts

    CERN Document Server

    De Rújula, Alvaro

    2007-01-01

    Recent data gathered and triggered by the SWIFT satellite have greatly improved our knowledge of long-duration gamma ray bursts (GRBs) and X-ray flashes (XRFs). This is particularly the case for the X-ray data at all times, and for UV and optical data at very early times. I show that the optical and X-ray observations are in excellent agreement with the predictions of the "cannonball" model of GRBs and XRFs. Elementary physics and just two mechanisms underlie these predictions: inverse Compton scattering and synchrotron radiation, generally dominant at early and late times, respectively. I put this result in its proper context and dedicate the paper to those who planed, built and operate SWIFT, a true flying jewel.

  10. Novel short-pulse laser diode source for high-resolution 3D flash lidar

    Science.gov (United States)

    Canal, Celine; Laugustin, Arnaud; Kohl, Andreas; Rabot, Olivier

    2017-06-01

    Imaging based on laser illumination is present in various fields of applications such as medicine, security, defense, civil engineering and in the automotive sector. In this last domain, research and development to bring autonomous vehicles on the roads has been intensified the recent years. Among the various technologies currently studied, automotive lidars are a fast-growing one due to their accuracy to detect a wide range of objects at distances up to a few hundreds of meters in various weather conditions. First commercialized devices for ADAS were laser scanners. Since then, new architectures have recently appeared such as solid-state lidar and flash lidar that offer a higher compactness, robustness and a cost reduction. Flash lidars are based on time-of-flight measurements, with the particularity that they do not require beam scanners because only one short laser pulse with a large divergence is used to enlighten the whole scene. Depth of encountered objects can then be recovered from measurement of echoed light at once, hence enabling real-time 3D mapping of the environment. This paper will bring into the picture a cutting edge laser diode source that can deliver millijoule pulses as short as 12 ns, which makes them highly suitable for integration in flash lidars. They provide a 100-kW peak power highly divergent beam in a footprint of 4x5 cm2 (including both the laser diode and driver) and with a 30-% electrical-to-optical efficiency, making them suitable for integration in environments in which compactness and power consumption are a priority. Their emission in the range of 800-1000 nm is considered to be eye safe when taking into account the high divergence of the output beam. An overview of architecture of these state-of-the-art pulsed laser diode sources will be given together with some solutions for their integration in 3D mapping systems. Future work leads will be discussed for miniaturization of the laser diode and drastic cost reduction.

  11. Fatigue Failure of a Flash Butt Welded Rail

    OpenAIRE

    Godefroid, L.B.; Faria, G.L.; Cândido, L.C.; Viana, T.G.

    2014-01-01

    Medium carbon steel rails are commonly jointed by means of a flash butt welding procedure. To ensure an adequate service life for the structural component commonly subjected to fatigue loading, a rigorous quality control should be performed, both in welding parameters and in the surface quality of the welded joint. This work investigated the cause of a recurrent failure in a railway, with cracking always initiated in the rail in the region of the welded joint. All standard procedures of failu...

  12. Flash-x-radiography for fuel motion studies

    International Nuclear Information System (INIS)

    Choate, L.M.; Halbleib, J.A. Sr.; Posey, L.D.

    1976-01-01

    The paper is primarily intended to be a status report on recent activities in the Flash X-ray Radiography/Cinematography area. Studies in the area of source definition as well as associated experimental limitations are discussed. The implications of machine current upon precision uncertainty in measurements of changes in areal density are presented. The radiographic techniques presently being evaluated are discussed. Performance estimates representative of this type of diagnostic tool are presented. Comparison with other results is made

  13. Flash flood swift water rescues, Texas, 2005–2014

    Directory of Open Access Journals (Sweden)

    Vaidehi Shah

    2017-01-01

    Full Text Available Although rainfall patterns are complex and difficult to predict, climate models suggest precipitation in Texas will occur less frequently and with greater intensity in the future. In combination with rapid population growth and development, extreme rainfall events are likely to lead to flash floods and necessitate swift water rescues. Swift water rescues are used to retrieve person(s from swift water flowing at a rate of 1 knot or greater. Data were obtained from the Texas Fire Marshal’s Office and analyzed to describe spatial and temporal characteristics of rescues. Between 2005 and 2014, 3256 swift water rescues were reported from 136 of 254 (54% counties. Over half (54.6%, n = 1777 occurred in counties known as Flash Flood Alley, which includes Texas’ largest and fastest growing cities. Less than 1.0% (n = 18 were reported from 49 counties designated as completely rural, or with an urban population less than 2500. Increases in swift water rescues were seen between March and September and during major weather events such as tropical storms. Because county-level data was utilized and demographic data was missing in all but 2% (n = 47 of the incidents, our ability to identify populations at risk or target interventions in the future using this data is limited. Despite the frequency of flash flood events and swift water rescues in Texas, knowledge gaps persist that should be addressed through the conduct of interdisciplinary research by epidemiologists and climatologists and by disseminating evidence-based health education and safety programs, particularly in rapidly growing counties that make up Texas’ Flash Flood Alley.

  14. The Role of Serotonin in Hot Flashes after Breast Cancer

    Science.gov (United States)

    2009-03-01

    not clear whether benefits are due to physiological effects on hot flashes or due to improvements in mood or other related symptoms. In addition...flavorings were most palatable - chocolate mint and orange. We rejected a lemon flavoring as being unpalatable. We eliminated the mid-day snack per...glucose tablets. Mood was not significantly impacted. Hamilton Rating Scale-Depression scores remained < 18 at all time points and for both study

  15. Characterization of carbon nanolayers flash evaporated on PET and PTFE

    Czech Academy of Sciences Publication Activity Database

    Švorčík, V.; Hubička, T.; Slepička, P.; Siegel, J.; Kolská, Z.; Bláhová, O.; Macková, Anna; Hnatowicz, Vladimír

    2009-01-01

    Roč. 47, č. 7 (2009), s. 1770-1778 ISSN 0008-6223 R&D Projects: GA MŠk(CZ) LC06041; GA ČR GA106/09/0125 Institutional research plan: CEZ:AV0Z10480505 Keywords : carbon nano-layers * flash evaporation * PET Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 4.504, year: 2009

  16. On the Mechanism of Microwave Flash Sintering of Ceramics

    Directory of Open Access Journals (Sweden)

    Yury V. Bykov

    2016-08-01

    Full Text Available The results of a study of ultra-rapid (flash sintering of oxide ceramic materials under microwave heating with high absorbed power per unit volume of material (10–500 W/cm3 are presented. Ceramic samples of various compositions—Al2O3; Y2O3; MgAl2O4; and Yb(LaO2O3—were sintered using a 24 GHz gyrotron system to a density above 0.98–0.99 of the theoretical value in 0.5–5 min without isothermal hold. An analysis of the experimental data (microwave power; heating and cooling rates along with microstructure characterization provided an insight into the mechanism of flash sintering. Flash sintering occurs when the processing conditions—including the temperature of the sample; the properties of thermal insulation; and the intensity of microwave radiation—facilitate the development of thermal runaway due to an Arrhenius-type dependency of the material’s effective conductivity on temperature. The proper control over the thermal runaway effect is provided by fast regulation of the microwave power. The elevated concentration of defects and impurities in the boundary regions of the grains leads to localized preferential absorption of microwave radiation and results in grain boundary softening/pre-melting. The rapid densification of the granular medium with a reduced viscosity of the grain boundary phase occurs via rotation and sliding of the grains which accommodate their shape due to fast diffusion mass transport through the (quasi-liquid phase. The same mechanism based on a thermal runaway under volumetric heating can be relevant for the effect of flash sintering of various oxide ceramics under a dc/ac voltage applied to the sample.

  17. Monitoring of the process of Flash-Butt Welding

    OpenAIRE

    Chvertko,Yevgenia; Shevchenko,Mykola; Pirumov,Andriy

    2013-01-01

    Statistical methods of analysis are currently widely used to develop control and monitoring systems for different welding processes. These methods allow to obtain information about the process including effect of all factors on its results, which is often difficult to evaluate due to the complexity of the process. The authors made efforts to apply these methods to develop the system for monitoring the parameters of flash-butt welding in real-time mode. The paper gives brief information about ...

  18. Production of Energetic Nanomaterials by Spray Flash Evaporation

    OpenAIRE

    Martin Klaumünzer; Jakob Hübner; Denis Spitzer

    2016-01-01

    Within this paper, latest results on processing of energetic nanomaterials by means of the Spray Flash Evaporation technique are presented. This technology constitutes a highly effective and continuous way to prepare fascinating materials on the nano- and micro-scale. Within the process, a solution is set under high pressure and sprayed into an evacuated atomization chamber. Subsequent ultrafast evaporation of the solvent leads to an aerosol stream, which is separated by cyclones or filters. ...

  19. Media Pengetahuan Metamorfosis Kupu-Kupu dengan Adobe Flash

    OpenAIRE

    Adjie, Fauzan

    2015-01-01

    Kajian ini bertujuan untuk membangun sebuah sistem aplikasi pengenalan. Aplikasi pengethauan metamorfosis kupu - kupu ini dibuat dengan menggunakan perangkat lunak macromedia flash 5. Manfaat dari sistem pengenalan ini adalah membantu para siswa sekolah dasar maupun sekolah menengah atas untuk mengetahui metamorfosis kupu - kupu, khususnya pengetahuan alam. Isi yang di sampaikan mulai dari teori pengetahuan metamorfosis kupu - kupu, yaitu siklus hidup dan metamorfosis yang dimulai dari telur ...

  20. A hybrid type Ia supernova with an early flash triggered by helium-shell detonation

    Science.gov (United States)

    Jiang, Ji-An; Doi, Mamoru; Maeda, Keiichi; Shigeyama, Toshikazu; Nomoto, Ken'Ichi; Yasuda, Naoki; Jha, Saurabh W.; Tanaka, Masaomi; Morokuma, Tomoki; Tominaga, Nozomu; Ivezić, Željko; Ruiz-Lapuente, Pilar; Stritzinger, Maximilian D.; Mazzali, Paolo A.; Ashall, Christopher; Mould, Jeremy; Baade, Dietrich; Suzuki, Nao; Connolly, Andrew J.; Patat, Ferdinando; Wang, Lifan; Yoachim, Peter; Jones, David; Furusawa, Hisanori; Miyazaki, Satoshi

    2017-10-01

    Type Ia supernovae arise from the thermonuclear explosion of white-dwarf stars that have cores of carbon and oxygen. The uniformity of their light curves makes these supernovae powerful cosmological distance indicators, but there have long been debates about exactly how their explosion is triggered and what kind of companion stars are involved. For example, the recent detection of the early ultraviolet pulse of a peculiar, subluminous type Ia supernova has been claimed as evidence for an interaction between a red-giant or a main-sequence companion and ejecta from a white-dwarf explosion. Here we report observations of a prominent but red optical flash that appears about half a day after the explosion of a type Ia supernova. This supernova shows hybrid features of different supernova subclasses, namely a light curve that is typical of normal-brightness supernovae, but with strong titanium absorption, which is commonly seen in the spectra of subluminous ones. We argue that this early flash does not occur through previously suggested mechanisms such as the companion-ejecta interaction. Instead, our simulations show that it could occur through detonation of a thin helium shell either on a near-Chandrasekhar-mass white dwarf, or on a sub-Chandrasekhar-mass white dwarf merging with a less-massive white dwarf. Our finding provides evidence that one branch of previously proposed explosion models—the helium-ignition branch—does exist in nature, and that such a model may account for the explosions of white dwarfs in a mass range wider than previously supposed.

  1. A hybrid type Ia supernova with an early flash triggered by helium-shell detonation.

    Science.gov (United States)

    Jiang, Ji-An; Doi, Mamoru; Maeda, Keiichi; Shigeyama, Toshikazu; Nomoto, Ken'ichi; Yasuda, Naoki; Jha, Saurabh W; Tanaka, Masaomi; Morokuma, Tomoki; Tominaga, Nozomu; Ivezić, Željko; Ruiz-Lapuente, Pilar; Stritzinger, Maximilian D; Mazzali, Paolo A; Ashall, Christopher; Mould, Jeremy; Baade, Dietrich; Suzuki, Nao; Connolly, Andrew J; Patat, Ferdinando; Wang, Lifan; Yoachim, Peter; Jones, David; Furusawa, Hisanori; Miyazaki, Satoshi

    2017-10-04

    Type Ia supernovae arise from the thermonuclear explosion of white-dwarf stars that have cores of carbon and oxygen. The uniformity of their light curves makes these supernovae powerful cosmological distance indicators, but there have long been debates about exactly how their explosion is triggered and what kind of companion stars are involved. For example, the recent detection of the early ultraviolet pulse of a peculiar, subluminous type Ia supernova has been claimed as evidence for an interaction between a red-giant or a main-sequence companion and ejecta from a white-dwarf explosion. Here we report observations of a prominent but red optical flash that appears about half a day after the explosion of a type Ia supernova. This supernova shows hybrid features of different supernova subclasses, namely a light curve that is typical of normal-brightness supernovae, but with strong titanium absorption, which is commonly seen in the spectra of subluminous ones. We argue that this early flash does not occur through previously suggested mechanisms such as the companion-ejecta interaction. Instead, our simulations show that it could occur through detonation of a thin helium shell either on a near-Chandrasekhar-mass white dwarf, or on a sub-Chandrasekhar-mass white dwarf merging with a less-massive white dwarf. Our finding provides evidence that one branch of previously proposed explosion models-the helium-ignition branch-does exist in nature, and that such a model may account for the explosions of white dwarfs in a mass range wider than previously supposed.

  2. Bio-oil from Flash Pyrolysis of Agricultural Residues

    DEFF Research Database (Denmark)

    Ibrahim, Norazana

    This thesis describes the production of bio-oils from flash pyrolysis of agricultural residues, using a pyrolysis centrifugal reactor (PCR). By thermal degradation of agricultural residues in the PCR, a liquid oil, char and non-condensable gases are produced. The yield of each fraction is influen......This thesis describes the production of bio-oils from flash pyrolysis of agricultural residues, using a pyrolysis centrifugal reactor (PCR). By thermal degradation of agricultural residues in the PCR, a liquid oil, char and non-condensable gases are produced. The yield of each fraction...... lower temperatures increase the yield of char. Liquid oil, however increases with temperature up to certain point and thereafter it decreases at still higher temperature due to secondary cracking of the primary products. The presence of moisture in the feed stock may also influences the pyrolysis...... process. The influence of reaction temperature and the moisture content on the flash pyrolysis product yield has been reported in Paper I (Chapter 2). It was observed that the presence of moisture in the wheat straw with different moisture levels of 1.5 wt. %, 6.2 wt. % and 15.0 wt. % have shown...

  3. The SWARF high energy flash X-ray facility

    International Nuclear Information System (INIS)

    Gilbert, J.F.; Dove, E.W.D.

    1976-06-01

    A description is presented of the SWARF flash radiography facility at AWRE Foulness, which is stated to be the most powerful flash x-ray system available, in the U.K. The machine consists essentially of a Marx generator, a coaxial Blumlein system and an x-ray tube. The voltage output from the Marx generator (about 2.5 MV from an 80 kV input) is applied to a large re-entrant Blumlein pulse-forming line. Near maximum voltage, an adjustable oil switch short-circuits one end of the Blumlein generator and so applies a square voltage pulse of 65 ns duration to the x-ray tube. The x-rays are produced from a tantalum target which forms the anode of a vacuum field emission diode. The facility consists of two field machines positioned so that radiographs can be obtained from different angles. The description is given under the following heads: modus operandi; constructional details; oil installation; electrical details; commissioning, calibration and electrical data; flash radiography in explosives research; operational control of facility, film packs; radiographic results; further developments; overall performance. (U.K.)

  4. Detection and spectral measurements of coherent synchrotron radiation at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Behrens, Christopher

    2010-02-15

    The operation of high-gain free-electron laser (FEL) underlies tremendous demands on high quality electron beams with high peak currents. At the Free-Electron-Laser in Hamburg (FLASH), two magnetic bunch compressors are used to compress the electron bunches longitudinally. In the bunch compressor magnets, these short electron bunches generate coherent synchrotron radiation (CSR). This CSR contains information on the longitudinal bunch profile, which is relevant for driving an FEL. In order to investigate coherent synchrotron radiation at the second bunch compressor BC3 at FLASH, a new setup behind the last dipole was installed. For the detection of coherent synchrotron radiation, which is emitted in the infrared regime, pyroelectric detectors were used. These pyroelectric detectors have been calibrated at the free-electron laser FELIX in the wavelength range from 5 {mu}m to 110 {mu}m. For characterisation of the emitted radiation, a transverse scanning device was used to measure the transverse intensity distribution. Various transmission filters were used to obtain additional information about the spectral content. In order to get spectral information with high resolution over a wide wavelength range, a rotating mirror spectrometer using reflective blazed gratings was installed. Using this spectrometer, the first spectral measurements of coherent synchrotron radiation at FLASH in a wavelength range from 10 {mu}m to 160 {mu}m were done. (orig.)

  5. Infrared Contrast Analysis Technique for Flash Thermography Nondestructive Evaluation

    Science.gov (United States)

    Koshti, Ajay

    2014-01-01

    The paper deals with the infrared flash thermography inspection to detect and analyze delamination-like anomalies in nonmetallic materials. It provides information on an IR Contrast technique that involves extracting normalized contrast verses time evolutions from the flash thermography infrared video data. The paper provides the analytical model used in the simulation of infrared image contrast. The contrast evolution simulation is achieved through calibration on measured contrast evolutions from many flat bottom holes in the subject material. The paper also provides formulas to calculate values of the thermal measurement features from the measured contrast evolution curve. Many thermal measurement features of the contrast evolution that relate to the anomaly characteristics are calculated. The measurement features and the contrast simulation are used to evaluate flash thermography inspection data in order to characterize the delamination-like anomalies. In addition, the contrast evolution prediction is matched to the measured anomaly contrast evolution to provide an assessment of the anomaly depth and width in terms of depth and diameter of the corresponding equivalent flat-bottom hole (EFBH) or equivalent uniform gap (EUG). The paper provides anomaly edge detection technique called the half-max technique which is also used to estimate width of an indication. The EFBH/EUG and half-max width estimations are used to assess anomaly size. The paper also provides some information on the "IR Contrast" software application, half-max technique and IR Contrast feature imaging application, which are based on models provided in this paper.

  6. MR study of intracranial disease with three-dimensional FLASH

    International Nuclear Information System (INIS)

    Runge, V.M.; Wood, M.L.; Kaufman, D.M.; Nelson, K.L.; Traill, M.R.; Wolpert, S.M.

    1987-01-01

    A three-dimensional FLASH technique was used to study 36 patients with intracranial disease at 1 T (Siemens Magnetom). This included 15 cases of intracranial neoplastic disease, four with the application of intravenous Gd-DTPA. Contiguous thin sections (1-2 mm thick) were acquired of the entire intracranial contents using one acquisition (scan time of 5-15 minutes). A MIPRON (KONTRON Instruments) image processing work station was used for rapid image display and 3D reconstruction. 3D FLASH was found to be superior to spin-echo imaging at 1 T for the detection of hemorrhage. 3D acquisition also provided superior localization of neoplastic disease. The T1 contrast achieved was comparable to spin-echo technique with a repetition time/echo time of .6/17. The advantages in terms of lesion localization and thin-section imaging with high spatial resolution of the entire brain may lead to use of 3D FLASH in place of conventional spin-echo imaging

  7. A terrestrial gamma ray flash observed from an aircraft

    Science.gov (United States)

    Smith, D. M.; Dwyer, J. R.; Hazelton, B. J.; Grefenstette, B. W.; Martinez-McKinney, G. F. M.; Zhang, Z. Y.; Lowell, A. W.; Kelley, N. A.; Splitt, M. E.; Lazarus, S. M.; Ulrich, W.; Schaal, M.; Saleh, Z. H.; Cramer, E.; Rassoul, H.; Cummer, S. A.; Lu, G.; Shao, X.-M.; Ho, C.; Hamlin, T.; Blakeslee, R. J.; Heckman, S.

    2011-10-01

    On 21 August 2009, the Airborne Detector for Energetic Lightning Emissions (ADELE), an array of six gamma-ray detectors, detected a brief burst of gamma rays while flying aboard a Gulfstream V jet near two active thunderstorm cells. The duration and spectral characteristics of the event are consistent with the terrestrial gamma ray flashes (TGFs) seen by instruments in low Earth orbit. A long-duration, complex +IC flash was taking place in the nearer cell at the same time, at a distance of ˜10 km from the plane. The sferics that are probably associated with this flash extended over 54 ms and included several ULF pulses corresponding to charge moment changes of up to 30 C km, this value being in the lower half of the range of sferics associated with TGFs seen from space. Monte Carlo simulations of gamma ray propagation in the Earth's atmosphere show that a TGF of normal intensity would, at this distance, have produced a gamma ray signal in ADELE of approximately the size and spectrum that was actually observed. We conclude that this was the first detection of a TGF from an aircraft. We show that because of the distance, ADELE's directional and spectral capabilities could not strongly constrain the source altitude of the TGF but that such constraints would be possible for TGFs detected at closer range.

  8. Turbulent spots and scalar flashes in pipe transition

    Science.gov (United States)

    Adrian, Ronald; Wu, Xiaohua; Moin, Parviz

    2017-11-01

    Recent study (Wu et al., PNAS, 1509451112, 2015) demonstrated the feasibility and accuracy of direct computation of the Osborne Reynolds' pipe transition experiment without the unphysical axially periodic boundary condition. Here we use this approach to address three questions: (1) What are the dynamics of turbulent spot generation in pipe transition? (2) How is the succession of scalar flashes, as observed and sketched by Osborne Reynolds, created? (3) What happens to the succession of flashes further downstream? In this study, the inlet disturbance is of radial-mode type imposed through a narrow, three-degree numerical wedge; and the simulation Reynolds number is 6500. Numerical dye is introduced at the inlet plane locally very close to the pipe axis, similar to the needle injection by O. Reynolds. Inception of infant turbulent spots occurs when normal, forward inclined hairpin packets form near the walls from the debris of the inlet perturbations. However, the young and mature turbulent spots consist almost exclusively of reverse, backward leaning hairpin vortices. Scalar flashes appear successively downstream and persist well into the fully-developed turbulent region. Their creation mechanism is addressed. RJA gratefully acknowledges support of the National Science Foundation with NSF Award CBET-0933848.

  9. Efficacy of desvenlafaxine succinate for menopausal hot flashes.

    Science.gov (United States)

    Tella, Sri Harsha; Gallagher, John Christopher

    2014-11-01

    The concern for the development of breast cancer, stroke, cardiovascular disease and deep venous thrombosis with the use of hormonal therapy has led to the development of alternative nonhormonal forms of therapy like desvenlafaxine for the management of hot flashes. This review is based upon a PubMed search and clinical trials. The pharmacokinetics and pharmacodynamics of desvenlafaxine are reviewed. This review outlines the effects of desvenlafaxine in management of severity and frequency of vasomotor symptoms, sleep quality and quality of life in postmenopausal women. The potential adverse effects of desvenlafaxine are summarized. Based on the evidence from randomized clinical trials, desvenlafaxine is an alternate viable option for reducing the frequency and severity of hot flashes when other treatments fail. In clinical trials, it has been shown that desvenlafaxine reduced the frequency of hot flashes by 55 - 69%. In the trials so far it appears to have good safety and tolerability profile when the drug is initiated in titrating doses. The optimum dose is 100 mg/day and is to be started at 50 mg/day for 3 days and titrated to 100 mg/day. The most common adverse events reported were nausea, dry mouth, fatigue, constipation, diarrhea and somnolence.

  10. Energetic and exergetic Improvement of geothermal single flash cycle

    Directory of Open Access Journals (Sweden)

    Navid Nazari

    2016-08-01

    Full Text Available This paper presents a detailed analysis of a new method for improving energetic and exergetic efficiencies of single flash cycle. The thermodynamic process of the new method consists of extracting a fraction of hot wellhead geothermal brine for the purpose of superheating saturated steam entering the turbine. Computer programming scripts were developed and optimized based on mathematical proposed models for the different components of the systems. The operating parameters such as separator temperature, geofluid wellhead enthalpy and geothermal source temperature are varied to investigate their effects on both net power output and turbine exhaust quality of the systems. Also, full exergy assessment was performed for the new design. The results of separator temperature optimization revealed that specific net power output of the new design can be boosted up to 8% and turbine exhaust quality can be diminished up to 50% as compared to common single flash cycle. In addition, for wells with higher discharge enthalpy, superheating process improve specific net power output even up to 10%. Finally, it was observed that the overall system exergy efficiency was approximately raised 3%. Article History: Received January 5th 2016; Received in revised form June 25th 2016; Accepted July 3rd 2016; Available online How to Cite This Article: Nazari, N. and Porkhial, S. (2016. Energetic and Exergetic Improvement of Geothermal Single Flash Cycle. Int. Journal of Renewable Energy Development, 5(2,129-138. http://dx.doi.org/10.14710/ijred.5.2.129-138 

  11. The use of HBV model for flash flood forecasting

    Directory of Open Access Journals (Sweden)

    M. Kobold

    2006-01-01

    Full Text Available The standard conceptual HBV model was originally developed with daily data and is normally operated on daily time step. But many floods in Slovenia are usually flash floods as result of intense frontal precipitation combined with orographic enhancement. Peak discharges are maintained only for hours or even minutes. To use the HBV model for flash flood forecasting, the version of HBV-96 has been applied on the catchment with complex topography with the time step of one hour. The recording raingauges giving hourly values of precipitation have been taken in calibration of the model. The uncertainty of simulated runoff is mainly the result of precipitation uncertainty associated with the mean areal precipitation and is higher for mountainous catchments. Therefore the influence of number of raingauges used to derive the areal precipitation by the method of Thiessen polygons was investigated. The quantification of hydrological uncertainty has been performed by analysis of sensitivity of the HBV model to error in precipitation input. The results show that an error of 10% in the amount of precipitation causes an error of 17% in the peak of flood wave. The polynomial equations showing the relationship between the errors in rainfall amounts and peak discharges were derived for two water stations on the Savinja catchment. Simulated discharges of half-yearly runs demonstrate the applicability of the HBV model for flash flood forecasting using the mesoscale meteorological forecasts of ALADIN/SI model as input precipitation data.

  12. RISK OF LONG TERM HOT FLASHES AFTER NATURAL MENOPAUSE: EVIDENCE FROM THE PENN OVARIAN AGING COHORT

    Science.gov (United States)

    Freeman, Ellen W.; Sammel, Mary D.; Sanders, Richard J.

    2015-01-01

    Objectives To estimate the risk of hot flashes relative to natural menopause and evaluate associations of hormone levels, behavioral and demographic variables with the risk of hot flashes following menopause. Methods Annual assessments of 255 women who were premenopausal at baseline and reached natural menopause during 16 years of follow-up. Results The prevalence of moderate/severe hot flashes increased in each premenopausal year, reaching a peak of 46% in the first two years after the final menstrual period (FMP). Hot flashes decreased slowly following menopause and did not return to premenopausal levels until 9 years after FMP. The mean duration of moderate/severe hot flashes after FMP was 4.6 (SD2.9) years (4.9, SD3.1 years for any hot flashes). One-third of women at 10 or more years following menopause continued to experience moderate/severe hot flashes. African American women (obese and non-obese) and obese white women had significantly greater risk of hot flashes compared to non-obese white women (interaction P=0.01). In multivariable analysis, increasing FSH levels before FMP (Pmenopause; more than one- third of women observed for 10 or more years following menopause had moderate/severe hot flashes. Continuation of hot flashes for more than 5 years following menopause underscores the importance of determining individual risk/benefit when selecting hormone or non-hormonal therapy for menopausal symptoms. PMID:24473530

  13. Acupuncture as Treatment of Hot Flashes and the Possible Role of Calcitonin Gene-Related Peptide

    Directory of Open Access Journals (Sweden)

    Anna-Clara E. Spetz Holm

    2012-01-01

    Full Text Available The mechanisms behind hot flashes in menopausal women are not fully understood. The flashes in women are probably preceded by and actually initiated by a sudden downward shift in the set point for the core body temperature in the thermoregulatory center that is affected by sex steroids, β-endorphins, and other central neurotransmitters. Treatments that influence these factors may be expected to reduce hot flashes. Since therapy with sex steroids for hot flashes has appeared to cause a number of side effects and risks and women with hot flashes and breast cancer as well as men with prostate cancer and hot flashes are prevented from sex steroid therapy there is a great need for alternative therapies. Acupuncture affecting the opioid system has been suggested as an alternative treatment option for hot flashes in menopausal women and castrated men. The heat loss during hot flashes may be mediated by the potent vasodilator and sweat gland activator calcitonin gene-related peptide (CGRP the concentration of which increases in plasma during flashes in menopausal women and, according to one study, in castrated men with flushes. There is also evidence for connections between the opioid system and the release of CGRP. In this paper we discuss acupuncture as a treatment alternative for hot flashes and the role of CGRP in this context.

  14. Evaluating Letter Recognition, Flicker Fusion, and the Talbot-Plateau Law using Microsecond-Duration Flashes

    Science.gov (United States)

    Greene, Ernest

    2015-01-01

    Four experiments examined the ability of respondents to identify letters that were displayed on an LED array with flashes lasting little more than a microsecond. The first experiment displayed each letter with a single, simultaneous flash of all the dots forming the letter and established the relation of flash intensity to the probability of letter identification. The second experiment displayed the letters with multiple flashes at different frequencies to determine the probability that the sequence of flashes would be perceived as fused. The third experiment displayed the letters at a frequency that was above the flicker-fusion frequency, varying flash intensity to establish the amount needed to elicit a given probability of letter identification. The fourth experiment displayed each letter twice, once at a frequency where no flicker was perceived and also with steady light emission. The intensity of each flash was fixed and the steady intensity was varied; respondents were asked to judge whether the fused-flicker display and the steady display appeared to be the same brightness. Steady intensity was about double the average flash intensity where the two conditions were perceived as being equal in brightness. This is at odds with Talbot-Plateau law, which predicts that these two values should be equal. The law was formulated relative to a flash lasting half of each period, so it is surprising that it comes this close to being correct where the flash occupies only a millionth of the total period. PMID:25875652

  15. Flash pyrolysis, a process for utilizing contaminated wood; Flash-Pyrolyse - eine Moeglichkeit der stofflichen Verwertung von kontaminiertem Holz

    Energy Technology Data Exchange (ETDEWEB)

    Meier, D.; Wehlte, S.; Faix, O. [Bundesforschungsanstalt fuer Forst- und Holzwirtschaft, Hamburg (Germany). Inst. fuer Holzchemie und Chemische Technologie des Holzes

    1996-12-31

    Flash pyrolysis of wood treated with common pesticides poses no technical probelms. Product yields, with a maximum oil yield at 475 C, are similar to those of untreated wood. Most of the heavy metals are retained by the coal while a small part aheres to the coal layer of the sand bed. The resulting pyrolysis oil contains neither chromium nor copper. (orig) [Deutsch] Die Flash-Pyrolyse der mit den gaengigsten Schutzmitteln behandelten Hoelzer bereitet verfahrenstechnisch keine Probleme. Auch die Produktausbeuten, mit einem oelmaximum bei 475 C, aehneln denen von naturbelassenem Holz. Der groesste Teil der Schwermetalle wurde an die Kohle gebunden, ein geringer Teil blieb auf der Kohleschicht des Sandes haften. Im Hauptprodukt Pyrolyseoel konnten weder Chrom noch Kupfer nachgewiesen werden. (orig)

  16. Observations of High Peak Current 'lull' Lightning Flashes

    Science.gov (United States)

    Zhang, Y.; Krehbiel, P. R.; Edens, H. E.; Stock, M.

    2015-12-01

    A new and peculiar type of negative cloud-to-ground (-CG) lightning flash has been found from LMA observations of storms. Called a 'lull' flash, the discharge begins with a short duration (~5-10 ms), stepped leader and high peak current return stroke, followed by a brief period of inactivity. After a few tens to a few hundreds of milliseconds, the discharge reignites in the same location as a normal -CG. VHF observations show a complete lack of activity during the lull. The flashes were first identified from LMA observations during a 2008 lightning study in West Virginia (Krehbiel, 2012 ILDC), but are seen in other normally electrified storms. They are characterized by large negative peak currents (-50 to -150 kA) in NLDN data. Here we report detailed LMA, interferometer, and fast antenna observations of lull flashes obtained at Langmuir Laboratory in 2013. A series of six lull CGs occurred over an 11 min time interval in a small storm on August 5. Analysis of the observations shows the breakdown immediately produced a stepped leader that went straight to ground. The durations from initial breakdown to the return stroke (RS) was 2-15 ms, corresponding to leader speeds of 4×105 to 3×106 m/s. Peak currents of the RSs were -32 to -188 kA. The lulls began 10-29 ms after the RSs, and lasted 40-100 ms before the discharge reignited. By contrast, the durations, speeds and peak current values of the reignited first strokes were those of normal -CGs, namely, 9 to 105 ms, -11.5kA to 55.8kA, and 0.6×105 to 6.7×105 m/s. Further analysis indicates the lull flashes occurred when the storm had substantial negative charge but little lower positive charge, allowing the initial stroke to go straight to ground at a high speed. The energetic stroke somehow quenches the discharge a short time afterward while much negative charge remains, which leads to reignition and the second part of the discharge. Exactly how and why this happens remains an open question.

  17. Discriminating Bacteria with Optical Sensors Based on Functionalized Nanoporous Xerogels

    Directory of Open Access Journals (Sweden)

    Sabine Crunaire

    2014-06-01

    Full Text Available An innovative and low-cost method is proposed for the detection and discrimination of indole-positive pathogen bacteria. The method allows the non-invasive detection of gaseous indole, released by bacteria, with nanoporous colorimetric sensors. The innovation comes from the use of nanoporous matrices doped with 4-(dimethylamino-cinnamaldehyde, which act as sponges to trap and concentrate the targeted analyte and turn from transparent to dark green, long before the colonies get visible with naked eyes. With such sensors, it was possible to discriminate E. coli from H. alvei, two indole-positive and negative bacteria after seven hours of incubation.

  18. Flow ensemble prediction for flash flood warnings at ungauged basins

    Science.gov (United States)

    Demargne, Julie; Javelle, Pierre; Organde, Didier; Caseri, Angelica; Ramos, Maria-Helena; de Saint Aubin, Céline; Jurdy, Nicolas

    2015-04-01

    Flash floods, which are typically triggered by severe rainfall events, are difficult to monitor and predict at the spatial and temporal scales of interest due to large meteorological and hydrologic uncertainties. In particular, uncertainties in quantitative precipitation forecasts (QPF) and quantitative precipitation estimates (QPE) need to be taken into account to provide skillful flash flood warnings with increased warning lead time. In France, the AIGA discharge-threshold flood warning system is currently being enhanced to ingest high-resolution ensemble QPFs from convection-permitting numerical weather prediction (NWP) models, as well as probabilistic QPEs, to improve flash flood warnings for small-to-medium (from 10 to 1000 km²) ungauged basins. The current deterministic AIGA system is operational in the South of France since 2005. It ingests the operational radar-gauge QPE grids from Météo-France to run a simplified hourly distributed hydrologic model at a 1-km² resolution every 15 minutes (Javelle et al. 2014). This produces real-time peak discharge estimates along the river network, which are subsequently compared to regionalized flood frequency estimates of given return periods. Warnings are then provided to the French national hydro-meteorological and flood forecasting centre (SCHAPI) and regional flood forecasting offices, based on the estimated severity of ongoing events. The calibration and regionalization of the hydrologic model has been recently enhanced to implement an operational flash flood warning system for the entire French territory. To quantify the QPF uncertainty, the COSMO-DE-EPS rainfall ensembles from the Deutscher Wetterdienst (20 members at a 2.8-km resolution for a lead time of 21 hours), which are available on the North-eastern part of France, were ingested in the hydrologic model of the AIGA system. Streamflow ensembles were produced and probabilistic flash flood warnings were derived for the Meuse and Moselle river basins and

  19. The Adjoint Method for Gradient-based Dynamic Optimization of UV Flash Processes

    DEFF Research Database (Denmark)

    Ritschel, Tobias Kasper Skovborg; Capolei, Andrea; Jørgensen, John Bagterp

    2017-01-01

    This paper presents a novel single-shooting algorithm for gradient-based solution of optimal control problems with vapor-liquid equilibrium constraints. Dynamic optimization of UV flash processes is relevant in nonlinear model predictive control of distillation columns, certain two-phase flow......-component flash process which demonstrate the importance of the optimization solver, the compiler, and the linear algebra software for the efficiency of dynamic optimization of UV flash processes....

  20. Flash-Point prediction for binary partially miscible aqueous-organic mixtures

    OpenAIRE

    Liaw, Horng-Jang; Chen, Chien Tsun; Gerbaud, Vincent

    2008-01-01

    Flash point is the most important variable used to characterize fire and explosion hazard of liquids. Herein, partially miscible mixtures are presented within the context of liquid-liquid extraction processes and heterogeneous distillation processes. This paper describes development of a model for predicting the flash point of binary partially miscible mixtures of aqueous-organic system. To confirm the predictive efficiency of the derived flash points, the model was verified by comparing the ...

  1. Enhancing Endurance of Huge-Capacity Flash Storage Systems by Selectively Replacing Data Blocks

    Science.gov (United States)

    Wang, Wei-Neng; Ni, Kai; Ma, Jian-She; Wang, Zong-Chao; Zhao, Yi; Pan, Long-Fa

    The wear leveling is a critical factor which significantly impacts the lifetime and the performance of flash storage systems. To extend lifespan and reduce memory requirements, this paper proposed an efficient wear leveling without substantially increasing overhead and without modifying Flash Translation Layer (FTL) for huge-capacity flash storage systems, which is based on selective replacement. Experimental results show that our design levels the wear of different physical blocks with limited system overhead compared with previous algorithms.

  2. Risk Factors for Extended Duration and Timing of Peak Severity of Hot Flashes.

    Directory of Open Access Journals (Sweden)

    Rebecca Lee Smith

    Full Text Available To identify risk factors associated with the duration of hot flashes and the time of peak hot flash severity in mid-life women.A cohort of 647 women reporting hot flashes were followed for 1-7 years, with survey data and hormone measurements. Survival analysis determined the association of risk factors with the duration of hot flashes. Linear regression determined the association of risk factors with the time of peak severity. Final models were determined through stepwise model selection.Average hot flash duration was 2.5 years (range: 1-33, with peak severity on average at 2.96 years (range: 1-20. Duration of hot flashes was associated with race, education, menopause status, smoking history, BMI, alcohol consumption, leisure activity levels, and levels of estradiol and progesterone. In the final model, only race, alcohol consumption, leisure activity, and menopause were retained. White women had significantly shorter hot flash durations than non-white women. Women consuming at least 12 alcoholic drinks in the previous year had a significantly shorter duration of hot flashes with a smaller effect of hot flash duration on increasing in time to peak severity compared to those who consumed less than 12 alcoholic drinks in that year. Higher serum progesterone levels were associated with later peak severity if the duration of the hot flashes was less than 2 years and an earlier peak severity otherwise.These results suggest that some behaviors (such as moderate alcohol consumption are associated with shorter durations of hot flashes, and that progesterone was associated with the dynamics of hot flash severity.

  3. Ensuring the Trust of NAND Flash Memory: Going Beyond the Published Interface

    Science.gov (United States)

    2016-03-17

    Ensuring the Trust of NAND Flash Memory : Going Beyond the Published Interface Austin H. Roach, Matthew J. Gadlage, James D. Ingalls, Aaron...can be used to measure subtle changes in the memory cells of advanced Flash memories caused by program/erase stress, radiation exposure, or process...from COTS assemblies without publically available datasheets. Keywords: NAND Flash; partial program; partial erase; interrupted program; interrupted

  4. Metabolic activity in the insular cortex and hypothalamus predicts hot flashes: an FDG-PET study.

    Science.gov (United States)

    Joffe, Hadine; Deckersbach, Thilo; Lin, Nancy U; Makris, Nikos; Skaar, Todd C; Rauch, Scott L; Dougherty, Darin D; Hall, Janet E

    2012-09-01

    Hot flashes are a common side effect of adjuvant endocrine therapies (AET; leuprolide, tamoxifen, aromatase inhibitors) that reduce quality of life and treatment adherence in breast cancer patients. Because hot flashes affect only some women, preexisting neurobiological traits might predispose to their development. Previous studies have implicated the insula during the perception of hot flashes and the hypothalamus in thermoregulatory dysfunction. The aim of the study was to understand whether neurobiological factors predict hot flashes. [18F]-Fluorodeoxyglucose (FDG) positron emission tomography (PET) brain scans coregistered with structural magnetic resonance imaging were used to determine whether metabolic activity in the insula and hypothalamic thermoregulatory and estrogen-feedback regions measured before and in response to AET predict hot flashes. Findings were correlated with CYP2D6 genotype because of CYP2D6 polymorphism associations with tamoxifen-induced hot flashes. We measured regional cerebral metabolic rate of glucose uptake (rCMRglu) in the insula and hypothalamus on FDG-PET. Of 18 women without hot flashes who began AET, new-onset hot flashes were reported by 10 (55.6%) and were detected objectively in nine (50%) participants. Prior to the use of all AET, rCMRglu in the insula (P ≤ 0.01) and hypothalamic thermoregulatory (P = 0.045) and estrogen-feedback (P = 0.007) regions was lower in women who reported developing hot flashes. In response to AET, rCMRglu was further reduced in the insula in women developing hot flashes (P ≤ 0.02). Insular and hypothalamic rCMRglu levels were lower in intermediate than extensive CYP2D6 metabolizers. Trait neurobiological characteristics predict hot flashes. Genetic variability in CYP2D6 may underlie the neurobiological predisposition to hot flashes induced by AET.

  5. Mathematical Communication Ability Viewed from Problem Solving Ability in Learning SAVI Model with Flash Media

    OpenAIRE

    Kurnia Setyo Rini; Sugiarto Sugiarto; Muhammad Fajar Safa'atullah

    2017-01-01

    The aims of this research were (1) to test the mathematical communication ability of Junior High School 3 Salatiga in learning SAVI model with flash media achieved learning completeness classically, (2) to test the average of students’ mathematical communication ability in learning SAVI model with flash media compared with the average of students’ mathematical communication ability in learning DL model, and (3)to analyze the influences of learning SAVI model with flash media to group of stude...

  6. In situ flash x-ray high-speed computed tomography for the quantitative analysis of highly dynamic processes

    Science.gov (United States)

    Moser, Stefan; Nau, Siegfried; Salk, Manfred; Thoma, Klaus

    2014-02-01

    The in situ investigation of dynamic events, ranging from car crash to ballistics, often is key to the understanding of dynamic material behavior. In many cases the important processes and interactions happen on the scale of milli- to microseconds at speeds of 1000 m s-1 or more. Often, 3D information is necessary to fully capture and analyze all relevant effects. High-speed 3D-visualization techniques are thus required for the in situ analysis. 3D-capable optical high-speed methods often are impaired by luminous effects and dust, while flash x-ray based methods usually deliver only 2D data. In this paper, a novel 3D-capable flash x-ray based method, in situ flash x-ray high-speed computed tomography is presented. The method is capable of producing 3D reconstructions of high-speed processes based on an undersampled dataset consisting of only a few (typically 3 to 6) x-ray projections. The major challenges are identified, discussed and the chosen solution outlined. The application is illustrated with an exemplary application of a 1000 m s-1 high-speed impact event on the scale of microseconds. A quantitative analysis of the in situ measurement of the material fragments with a 3D reconstruction with 1 mm voxel size is presented and the results are discussed. The results show that the HSCT method allows gaining valuable visual and quantitative mechanical information for the understanding and interpretation of high-speed events.

  7. Pulse Analysis Spectroradiometer System for Measuring the Spectral Distribution of Flash Solar Simulators: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Andreas, A. M.; Myers, D. R.

    2008-07-01

    Flashing artificial light sources are used extensively in photovoltaic module performance testing and plant production lines. There are several means of attempting to measure the spectral distribution of a flash of light; however, many of these approaches generally capture the entire pulse energy. We report here on the design and performance of a system to capture the waveform of flash at individual wavelengths of light. Any period within the flash duration can be selected, over which to integrate the flux intensity at each wavelength. The resulting spectral distribution is compared with the reference spectrum, resulting in a solar simulator classification.

  8. The relativistic feedback discharge model of terrestrial gamma ray flashes

    Science.gov (United States)

    Dwyer, Joseph R.

    2012-02-01

    As thunderclouds charge, the large-scale fields may approach the relativistic feedback threshold, above which the production of relativistic runaway electron avalanches becomes self-sustaining through the generation of backward propagating runaway positrons and backscattered X-rays. Positive intracloud (IC) lightning may force the large-scale electric fields inside thunderclouds above the relativistic feedback threshold, causing the number of runaway electrons, and the resulting X-ray and gamma ray emission, to grow exponentially, producing very large fluxes of energetic radiation. As the flux of runaway electrons increases, ionization eventually causes the electric field to discharge, bringing the field below the relativistic feedback threshold again and reducing the flux of runaway electrons. These processes are investigated with a new model that includes the production, propagation, diffusion, and avalanche multiplication of runaway electrons; the production and propagation of X-rays and gamma rays; and the production, propagation, and annihilation of runaway positrons. In this model, referred to as the relativistic feedback discharge model, the large-scale electric fields are calculated self-consistently from the charge motion of the drifting low-energy electrons and ions, produced from the ionization of air by the runaway electrons, including two- and three-body attachment and recombination. Simulation results show that when relativistic feedback is considered, bright gamma ray flashes are a natural consequence of upward +IC lightning propagating in large-scale thundercloud fields. Furthermore, these flashes have the same time structures, including both single and multiple pulses, intensities, angular distributions, current moments, and energy spectra as terrestrial gamma ray flashes, and produce large current moments that should be observable in radio waves.

  9. Modeling of Pulses in Terrestrial Gamma-ray Flashes

    Science.gov (United States)

    Xu, Wei; Celestin, Sebastien; Pasko, Victor

    2015-04-01

    Terrestrial Gamma-ray Flashes (TGFs) are high-energy photon bursts originating from the Earth's atmosphere that are associated with lightning activities. After their discovery in 1994 by the Burst and Transient Source Experiment (BATSE) detector aboard the Compton Gamma-Ray Observatory [Fishman et al., Science, 264, 1313, 1994], this phenomenon has been further observed by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) [Smith et al., Science, 307, 1085, 2005], the Fermi Gamma-ray Space Telescope [Briggs et al., JGR, 115, A07323, 2010] and the Astrorivelatore Gamma a Immagini Leggero (AGILE) satellite [Marisaldi et al., JGR, 115, A00E13, 2010]. Photon spectra corresponding to the mechanism of relativistic runaway electron avalanches (RREAs) usually provide a very good agreement with satellite observations [Dwyer and Smith, GRL, 32, L22804, 2005]. On the other hand, Celestin and Pasko [JGR, 116, A03315, 2011] have shown theoretically that the large flux of thermal runaway electrons generated by streamers during the negative corona flash stage of stepping lightning leaders in intracloud lightning flashes could be responsible for TGFs. Recently, based on analysis of the temporal profiles of 278 TGF events observed by the Fermi Gamma-Ray Burst Monitor, Foley et al. [JGR, 119, 5931, 2014] have suggested that 67% of TGF pulses detected are asymmetric and these asymmetric pulses are consistent with the production mechanism of TGFs by relativistic feedback discharges. In the present work, we employ a Monte Carlo model to study the temporal distribution of photons at low-orbit satellite altitudes during TGF events. Using the pulse fitting method described in [Foley et al., 2014], we further investigate the characteristics of TGF pulses. We mainly focus on the effects of Compton scattering on the symmetry properties and the rise and fall times of TGF pulses.

  10. Margin Reflex Distance: Differences Based on Camera and Flash Positions.

    Science.gov (United States)

    Choi, Catherine J; Chou, Jonathan C; Lefebvre, Daniel R; Yoon, Michael K

    2016-01-01

    To evaluate the effect of camera flash position on the measurement of photographic margin reflex distances (MRD). Subjects without any ophthalmic disease were prospectively enrolled after institutional review board approval. Clinical measurements of MRD1 and interpalpebral fissure were obtained. Photographs were then taken with a digital single lens reflex with built-in pop-up flash (dSLR-pop), a dSLR with lens-mounted ring flash (dSLR-ring), a point-and-shoot camera, and a smartphone, each in 4 positions: with the camera upright, rotated 90°, 180°, and 270°. The images were analyzed using ImageJ software to measure MRD1, interpalpebral fissure, horizontal white-to-white, and distance from nasal limbus to the corneal light reflex. Thirty-two eyes of 16 subjects were included (ages 27-65). When using the dSLR-ring, point-and-shoot, and smartphone, the difference between clinical and photographic MRD1 did not reach statistical significance. There was, however, a statistically significant difference in the upright position with dSLR-pop (mean difference 0.703 mm, σ = 0.984 mm, p = 0.0008). For dSLR-pop, photographic MRD1 in upright versus inverted position differed significantly (mean difference -0.562 mm, σ =0.348 mm, p MRD1 between dSLR-pop and dSLR-ring showed significant difference in upright position (mean difference -0.572 mm, σ = 0.701 mm, p = 0.0002). There were no statistically significant differences between clinical and photographic interpalpebral fissure, and among white-to-white and nasal limbus to light reflex measurements in any position in all 4 cameras. When using photographs for measurement of MRD1, cameras with a near-coaxial light source and aperture have values that are most similar to clinical measurements.

  11. SOLID-STATE STORAGE DEVICE FLASH TRANSLATION LAYER

    DEFF Research Database (Denmark)

    2017-01-01

    Embodiments of the present invention include a method for storing a data page d on a solid-state storage device, wherein the solid-state storage device is configured to maintain a mapping table in a Log-Structure Merge (LSM) tree having a C0 component which is a random access memory (RAM) device...... and a C1 component which is a flash-based memory device. Methods comprise: writing the data page d at a physical storage page having physical storage page address P in the storage device in response to receiving a write request to store the data page d at a logical storage page having a logical storage...

  12. The rarity of terrestrial gamma-ray flashes

    OpenAIRE

    Smith, D. M.; Dwyer, J. R.; Hazelton, B. J.; Grefenstette, B. W.; Martinez-McKinney, G. F. M.; Zhang, Z. Y.; Lowell, A. W.; Kelley, N. A.; Splitt, M. E.; Lazarus, S. M.; Ulrich, W.; Schaal, M.; Saleh, Z. H.; Cramer, E.; Rassoul, H. K.

    2011-01-01

    We report on the first search for Terrestrial Gamma-ray Flashes (TGFs) from altitudes where they are thought to be produced. The Airborne Detector for Energetic Lightning Emissions (ADELE), an array of gamma-ray detectors, was flown near the tops of Florida thunderstorms in August/September 2009. The plane passed within 10 km horizontal distance of 1213 lightning discharges and only once detected a TGF. If these discharges had produced TGFs of the same intensity as those seen from space, ever...

  13. Esters flash point prediction using artificial neural networks.

    Science.gov (United States)

    Astray, Gonzalo; Gálvez, Juan F; Mejuto, Juan C; Moldes, Oscar A; Montoya, Iago

    2013-02-15

    In this article, an artificial neural network to predict the flash point of 95 esters was implemented. Four variables were used for its development. A neural network with 4-5-8-5-1 topology was encountered to gain the best agreement of the experimental results with those predicted (square correlation coefficient (R(2)) and root mean square error were 0.99 and 5.46 K for the training phase and 0.96 and 13.02 K for the testing set). Copyright © 2012 Wiley Periodicals, Inc.

  14. A case of shadow flicker/flashing: assessment and solution

    International Nuclear Information System (INIS)

    Clarke, A.D.

    1991-01-01

    A short study was carried out investigating a reported problem of shadow flicker and flashing from the blades of a turbine. The incidence of this phenomenon was confirmed and the duration and frequency of occurrence assessed. The shadow flicker period would be short and only occur at certain times, but could cause irritation. A device to stop the turbine when shadow flicker occurred was recommended and is described. A recommendation was made that turbines should be sited at least ten diameters distance from habitations, and more if sited to the East/Southwest, and the shadow path identified. (author)

  15. Frequency upshift via flash ionization phenomena using semiconductor plasma

    Directory of Open Access Journals (Sweden)

    Nishida A.

    2013-11-01

    Full Text Available We have demonstrated frequency upshift in the terahertz region by flash ionization. The magnitude of upshift frequency is tuned by the laser intensity. A proof of principle experiment has been performed with a plasma creation time scale much shorter than the period of the electromagnetic wave and a plasma length longer than its wavelength. Frequency upshifted from 0.35 to 3.5 THz by irradiating a ZnSe crystal with a ultra-short laser pulse has been observed.

  16. Optic neuritis

    Science.gov (United States)

    Retro-bulbar neuritis; Multiple sclerosis - optic neuritis; Optic nerve - optic neuritis ... The exact cause of optic neuritis is unknown. The optic nerve carries visual information from your eye to the brain. The nerve can swell when ...

  17. Temporal Binding Window of the Sound-Induced Flash Illusion in Amblyopia.

    Science.gov (United States)

    Narinesingh, Cindy; Goltz, Herbert C; Wong, Agnes M F

    2017-03-01

    Amblyopia is a neurodevelopmental visual disorder caused by abnormal visual experience in childhood. In addition to known visual deficits, there is evidence for changes in audiovisual integration in amblyopia using explicit tasks. We examined audiovisual integration in amblyopia using an implicit task that is more relevant in a real-world context. A total of 11 participants with amblyopia and 16 controls were tested binocularly and monocularly on the sound-induced flash illusion, in which flashes and beeps are presented concurrently and the perceived number of flashes is influenced by the number of beeps. The task used 1 to 2 rapid peripheral flashes presented with 0 to 2 beeps, at 5 stimulus onset asynchronies, that is, beep (-200 milliseconds, -100 milliseconds) or flash leading (100 milliseconds, 200 milliseconds) or simultaneous (0 milliseconds). Participants reported the number of perceived flashes. Susceptibility was indicated by a "2 flashes" response to "fission" (1 flash, 2 beeps) or "1 flash" to "fusion" (2 flashes, 1 beep). For fission with the beep leading during binocular viewing, controls showed an expected decrease in illusion strength as stimulus onset asynchronies increased, whereas the illusion strength remained constant in participants with amblyopia, indicating a wider temporal binding window in amblyopia (P = 0.007). For fusion, participants with amblyopia showed reduced illusion strength during amblyopic eye viewing (P = 0.044) with the flash leading. Amblyopia is associated with the widening of the temporal binding window, specifically for fission when viewing binocularly with the beep leading. This suggests a developmental adaptation to delayed amblyopic eye visual processing to optimize audiovisual integration.

  18. Pengembangan Program Macromedia Flash 8 untuk Pembelajaran Fisika di SMA

    Directory of Open Access Journals (Sweden)

    Wiji Susilowati

    2007-12-01

    Full Text Available Tujuan penelitian adalah membuat dan mengevaluasi media pembelajaran fisika SMA menggunakan program Macromedia Flash 8. Subjek coba pada penelitian ini berjumlah 40 orang yang terdiri dari 10 siswa untuk uji coba instrumen penelitian, 10 siswa untuk ujicoba kelompok kecdl, dan 20 siswa untuk uji coba lapangan. Pengumpulan data dilakukan dengan mengguna­kan kuesioner dan tes fisika (pre-test dan post-test. Evaluasi terhadap program ditinjau dari aspek pembelajaran dan aspek media. Kritik dan saran digunakan untuk memperbaiki program. Hasil penelitian menunjukkan bahwa program Macromedia Flash 8 untuk pembelajaran fisika di SMA: (1 dirancang sesuai dengan prinsip-prinsip desain pembelajaran, (2 terbukti mampu menaikkan skor rerata tes fisika siswa sebesar 55,42%, (3 memiliki efisiensi waktu yang tinggi, (4 ditinjau dari aspek media Hinilai cukup bagus/menarik (dinilai/dikategorikan sedang oleh siswa, (5 ditinjau dari aspek pembelajaran secara keseluruhan program ini dinilai tinggi/jelas dimengerti oleh siswa, (6 ditinjau dari aspek media dinilai menarik (bagus/kategori tinggi oleh guru fisika, dan (7 ditinjau dari aspek pembelajaran juga dinilai menarik (bagus/kategori tinggi oleh guru fisika. Kata kunci: media pembelajaran fisika diSMA.

  19. NDDP multi-stage flash desalination process simulator design

    International Nuclear Information System (INIS)

    Chatterjee, M.; Sashi Kumar, G.N.; Mahendra, A.K.; Sanyal, A.; Gouthaman, G.

    2006-05-01

    A majority of large-scale desalination plants all over the world employ multi-stage flash (MSF) distillation process. Many of these MSF desalination plants have been set up near to nuclear power plants (generally called as nuclear desalination plants) to effectively utilize the low-grade steam from the power plants as the source of energy. A computer program called MSFSIM has been developed to simulate the MSF desalination plant operation both for steady state and various transients including start up. This code predicts the effect of number of stages, flashing temperature, velocity of brine flowing through the tubes of brine heater and evaporators, temperature of the condensing thin film etc. on the plant performance ratio. Such a code can be used for the design of a new plant and to predict its operating and startup characteristics. The code has been extensively validated with available start up data from the pilot MSF desalination plant of 425-m3/day capacity at Trombay, Mumbai. A MSF desalination plant of 4500-m3/day capacity is under construction by BARC at Kalpakkam, which will utilize the steam from Madras Atomic Power Station (MAPS). In this present work extensive parametric study of the 4500-m3/day capacity desalination plant at Kalpakkam has been done using the code MSFSIM for optimizing the operating parameters in order to maximize the performance ratio for stable plant operation. The aim of the work is prediction of plant performance under different operating conditions. (author)

  20. The mutagenic potential of high flash aromatic naphtha.

    Science.gov (United States)

    Schreiner, C A; Edwards, D A; McKee, R H; Swanson, M; Wong, Z A; Schmitt, S; Beatty, P

    1989-06-01

    Catalytic reforming is a refining process that converts naphthenes to aromatics by dehydrogenation to make higher octane gasoline blending components. A portion of this wide boiling range hydrocarbon stream can be separated by distillation and used for other purposes. One such application is a mixture of predominantly 9-carbon aromatic molecules (C9 aromatics, primarily isomers of ethyltoluene and trimethylbenzene), which is removed and used as a solvent--high-flash aromatic naphtha. A program was initiated to assess the toxicological properties of high-flash aromatic naphtha since there may be human exposure through inhalation or external body contact. The current study was conducted partly to assess the potential for mutagenic activity and also to assist in an assessment of carcinogenic potential. The specific tests utilized included the Salmonella/mammalian microsome mutagenicity assay, the hypoxanthine-guanine phosphoribosyl transferase (HGPRT) forward mutation assay in CHO cells, in vitro chromosome aberration and sister chromatid exchange (SCE) assays in CHO cells, and an in vivo chromosome aberration assay in rat bone marrow.

  1. Development of cable fed flash X-ray (FXR) system

    Science.gov (United States)

    Menon, Rakhee; Mitra, S.; Patel, A. S.; Kumar, R.; Singh, G.; Senthil, K.; Kumar, Ranjeet; Kolge, T. S.; Roy, Amitava; Acharya, S.; Biswas, D.; Sharma, Archana

    2017-08-01

    Flash X-ray sources driven by pulsed power find applications in industrial radiography, and a portable X-ray source is ideal where the radiography needs to be taken at the test site. A compact and portable flash X-ray (FXR) system based on a Marx generator has been developed with the high voltage fed to the FXR tube via a cable feed-through arrangement. Hard bremsstrahlung X-rays of few tens of nanosecond duration are generated by impinging intense electron beams on an anode target of high Z material. An industrial X-ray source is developed with source size as low as 1 mm. The system can be operated from 150 kV to 450 kV peak voltages and a dose of 10 mR has been measured at 1 m distance from the source window. The modeling of the FXR source has been carried out using particle-in-cell and Monte Carlo simulations for the electron beam dynamics and X-ray generation, respectively. The angular dose profile of X-ray has been measured and compared with the simulation.

  2. Nuclear fusion and carbon flashes on neutron stars

    Science.gov (United States)

    Taam, R. E.; Picklum, R. E.

    1978-01-01

    This paper reports on detailed calculations of the thermal evolution of the carbon-burning shells in the envelopes of accreting neutron stars for mass-accretion rates of 1 hundred-billionth to 2 billionths of a solar mass per yr and neutron-star masses of 0.56 and 1.41 solar masses. The work of Hansen and Van Horn (1975) is extended to higher densities, and a more detailed treatment of nuclear processing in the hydrogen- and helium-burning regions is included. Results of steady-state calculations are presented, and results of time-dependent computations are examined for accretion rates of 3 ten-billionths and 1 billionth of solar mass per yr. It is found that two evolutionary sequences lead to carbon flashes and that the carbon abundance at the base of the helium shell is a strong function of accretion rate. Upper limits are placed on the accretion rates at which carbon flashes will be important.

  3. The rarity of terrestrial gamma-ray flashes

    Science.gov (United States)

    Smith, D. M.; Dwyer, J. R.; Hazelton, B. J.; Grefenstette, B. W.; Martinez-McKinney, G. F. M.; Zhang, Z. Y.; Lowell, A. W.; Kelley, N. A.; Splitt, M. E.; Lazarus, S. M.; Ulrich, W.; Schaal, M.; Saleh, Z. H.; Cramer, E.; Rassoul, H. K.; Cummer, S. A.; Lu, G.; Blakeslee, R. J.

    2011-04-01

    We report on the first search for Terrestrial Gamma-ray Flashes (TGFs) from altitudes where they are thought to be produced. The Airborne Detector for Energetic Lightning Emissions (ADELE), an array of gamma-ray detectors, was flown near the tops of Florida thunderstorms in August/September 2009. The plane passed within 10 km horizontal distance of 1213 lightning discharges and only once detected a TGF. If these discharges had produced TGFs of the same intensity as those seen from space, every one should have been seen by ADELE. Separate and significant nondetections are established for intracloud lightning, negative cloud-to-ground lightning, and narrow bipolar events. We conclude that TGFs are not a primary triggering mechanism for lightning. We estimate the TGF-to-flash ratio to be on the order of 10-2 to 10-3 and show that TGF intensities cannot follow the well-known power-law distribution seen in earthquakes and solar flares, due to our limits on the presence of faint events.

  4. Helium shells and faint emission lines from slitless flash spectra.

    Science.gov (United States)

    Bazin, Cyril; Koutchmy, Serge

    2013-05-01

    At the time of the two last solar total eclipses of August 1st, 2008 in Siberia and July 11th, 2010 in French Polynesia, high frame rate CCD flash spectra were obtained. These eclipses occurred in quiet Sun period and after. The slitless flash spectra show two helium shells, in the weak Paschen α 4686 Å line of the ionized helium HeII and in the neutral helium HeI line at 4713 Å. The extensions of these helium shells are typically 3 Mm. In prominences, the extension of the interface with the corona is much more extended. The observations and analysis of these lines can properly be done only in eclipse conditions, when the intensity threshold reaches the coronal level, and the parasitic scattered light is virtually zero. Under the layers of 1 Mm above the limb, many faint low FIP lines were also seen in emission. These emission lines are superposed on the continuum containing absorption lines. The solar limb can be defined using the weak continuum appearing between the emission lines at the time of the second and third contact. The variations of the singly ionized iron line, the HeI and HeII lines and the continuum intensity are analyzed. The intensity ratio of ionized to neutral helium is studied for evaluating the ionization rate in low layers up to 2 Mm and also around a prominence.

  5. Neurophysiological monitoring simulation using flash animation for anesthesia resident training.

    Science.gov (United States)

    Rebel, Annette; Hatton, Kevin W; Sloan, Paul A; Hayes, Christopher T; Sardam, Sean C; Dority, Jeremy; Hassan, Zaki-Udin

    2011-02-01

    Surgery of the spine is associated with the possible complication of permanent nerve injury. Neurophysiological monitoring is widely used during spine surgery to decrease the incidence and severity of neurologic injury. A profound understanding of physiological and pharmacological factors influencing evoked potentials is expected from the anesthesia provider. Because demonstration and teaching of all somatosensory evoked potential (SSEP) changes is difficult in the clinical environment, we developed human patient simulator scenarios to facilitate the anesthesia resident training in neurophysiological monitoring. A SSEP simulation for resident training was created using flash animation in a patient simulation program and is the focus of this report. Feedback from participants (anesthesia residents) was obtained by a postscenario survey. This report provides a detailed description of the scenario and computer program. The survey findings indicated that the simulation session is an effective teaching method of SSEP monitoring. Flash animation integration into a patient simulation program for SSEP monitoring appears to be an effective method for anesthesia resident education in neurophysiological monitoring. Copyright © 2011 Society for Simulation in Healthcare

  6. A deafening flash! Visual interference of auditory signal detection.

    Science.gov (United States)

    Fassnidge, Christopher; Cecconi Marcotti, Claudia; Freeman, Elliot

    2017-03-01

    In some people, visual stimulation evokes auditory sensations. How prevalent and how perceptually real is this? 22% of our neurotypical adult participants responded 'Yes' when asked whether they heard faint sounds accompanying flash stimuli, and showed significantly better ability to discriminate visual 'Morse-code' sequences. This benefit might arise from an ability to recode visual signals as sounds, thus taking advantage of superior temporal acuity of audition. In support of this, those who showed better visual relative to auditory sequence discrimination also had poorer auditory detection in the presence of uninformative visual flashes, though this was independent of awareness of visually-evoked sounds. Thus a visually-evoked auditory representation may occur subliminally and disrupt detection of real auditory signals. The frequent natural correlation between visual and auditory stimuli might explain the surprising prevalence of this phenomenon. Overall, our results suggest that learned correspondences between strongly correlated modalities may provide a precursor for some synaesthetic abilities. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. FLASH: A finite element computer code for variably saturated flow

    International Nuclear Information System (INIS)

    Baca, R.G.; Magnuson, S.O.

    1992-05-01

    A numerical model was developed for use in performance assessment studies at the INEL. The numerical model, referred to as the FLASH computer code, is designed to simulate two-dimensional fluid flow in fractured-porous media. The code is specifically designed to model variably saturated flow in an arid site vadose zone and saturated flow in an unconfined aquifer. In addition, the code also has the capability to simulate heat conduction in the vadose zone. This report presents the following: description of the conceptual frame-work and mathematical theory; derivations of the finite element techniques and algorithms; computational examples that illustrate the capability of the code; and input instructions for the general use of the code. The FLASH computer code is aimed at providing environmental scientists at the INEL with a predictive tool for the subsurface water pathway. This numerical model is expected to be widely used in performance assessments for: (1) the Remedial Investigation/Feasibility Study process and (2) compliance studies required by the US Department of Energy Order 5820.2A

  8. Meteor observation from space - The Smart Panoramical Optical Sensor (SPOSH)

    Science.gov (United States)

    Koschny, D.; di Martino, M.; Oberst, J.

    The European Space Agency (ESA) is funding two parallel studies for a ``Smart Panoramic Optical Head''. The main goal is to develop the technology for a space-qualified, very light-sensitive camera with a wide field of view, both from the hardware and the software side. The scientific application is to allow imaging of phenomena on the dark side of planets or moons, e.g. lightning flashes from thunderstorms or electrical discharges in sand storms, meteors, impact flashes, aurorae, etc. This paper will concentrate on the potential of this camera for the study of meteors from an orbit around a planet.

  9. A Bayesian Network approach for flash flood risk assessment

    Science.gov (United States)

    Boutkhamouine, Brahim; Roux, Hélène; Pérès, François

    2017-04-01

    Climate change is contributing to the increase of natural disasters such as extreme weather events. Sometimes, these events lead to sudden flash floods causing devastating effects on life and property. Most recently, many regions of the French Mediterranean perimeter have endured such catastrophic flood events; Var (October 2015), Ardèche (November 2014), Nîmes (October 2014), Hérault, Gard and Languedoc (September 2014), and Pyrenees mountains (Jun 2013). Altogether, it resulted in dozens of victims and property damages amounting to millions of euros. With this heavy loss in mind, development of hydrological forecasting and warning systems is becoming an essential element in regional and national strategies. Flash flood forecasting but also monitoring is a difficult task because small ungauged catchments ( 10 km2) are often the most destructive ones as for the extreme flash flood event of September 2002 in the Cévennes region (France) (Ruin et al., 2008). The problem of measurement/prediction uncertainty is particularly crucial when attempting to develop operational flash-flood forecasting methods. Taking into account the uncertainty related to the model structure itself, to the model parametrization or to the model forcing (spatio-temporal rainfall, initial conditions) is crucial in hydrological modelling. Quantifying these uncertainties is of primary importance for risk assessment and decision making. Although significant improvements have been made in computational power and distributed hydrologic modelling, the issue dealing with integration of uncertainties into flood forecasting remains up-to-date and challenging. In order to develop a framework which could handle these uncertainties and explain their propagation through the model, we propose to explore the potential of graphical models (GMs) and, more precisely, Bayesian Networks (BNs). These networks are Directed Acyclic Graphs (DAGs) in which knowledge of a certain phenomenon is represented by

  10. A Comparison of Horizontal Cloud-To-Ground Lightning Flash Distance Using Weather Surveillance Radar And The Distance Between Successive Flashes Method

    National Research Council Canada - National Science Library

    Cox, Christopher

    1999-01-01

    On April 29th, 1996 an airman servicing a C-130 aircraft on Huriburt AFB Florida was struck and killed by a lightning flash that traveled an estimated 7 to 10 miles from storms south of the airfield...

  11. Production of bio-oils from wood by flash pyrolysis; Herstellung von Bio-Oelen aus Holz in einer Flash-Pyrolyseanlage

    Energy Technology Data Exchange (ETDEWEB)

    Meier, D.; Ollesch, T. [Bundesforschungsanstalt fuer Forst- und Holzwirtschaft, Hamburg (Germany). Inst. fuer Holzchemie und Chemische Technologie des Holzes; Gerdes, C.; Kaminsky, W. [Hamburg Univ. (Germany). Inst. fuer Technische und Makromolekulare Chemie (ITMCh)

    1998-09-01

    Flash pyrolysis is a medium-temperature process (around 475 C) in which biomass is heated up rapidly in the absence of oxygen. The pyrolysis products are cooled down rapidly, condensing into a reddish-brown liquid with around half the calorific value of a conventional heating oil. In contrast to conventional charcoal production, flash pyrolysis is a modern process whose process parameters enure high liquid yields. Modern fluidized-bed reactors for flash pyrolysis of biomass tend to have high heating rates and short times of residue. In the `Hamburg process`, fluidized-bed reactors are used successfully for pyrolysis of plastics. A flash pyrolysis plant for biomass treatment was constructed in cooperation with Hamburg University with funds provided by the `Bundesstiftung Umwelt`. This contribution describes the first series of experiments, mass balances and oil analyses using beech wood as material to be pyrolyzed. (orig./SR) [Deutsch] Flash-Pyrolyse ist ein Mitteltemperatur-Prozess (ca. 475 C), in dem Biomasse unter Sauerstoffausschluss sehr schnell erhitzt wird. Die entstehenden Pyrolyseprodukte werden schnell abgekuehlt und kondensieren zu einer roetlich-braunen Fluessigkeit, die etwa die Haelfte des Heizwertes eines konventionellen Heizoeles besitzt. Flash-Pyrolyse ist, im Gegensatz zur konventionellen Holzverkohlung, ein modernes Verfahren, dessen spezielle Verfahrensparameter hohe Fluessigausbeuten ermoeglichen. Hohe Aufheizraten, verbunden mit kurzen Verweilzeiten, werden mit stationaeren Wirbelbettreaktoren erzielt die gegenwaertig vorwiegend fuer die Flash-Pyrolyse von Biomasse eingesetzt werden. Im `Hamburger Verfahren` haben sich Wirbelbettreaktoren im Bereich der Kunststoffpyrolyse bewaehrt. Daher wurde in Zusammenarbeit mit der Universitaet Hamburg und finanzieller Foerderung der Bundesstiftung Umwelt eine Flash-Pyrolyseanlage fuer Biomasse gebaut: In dieser Arbeit werden erste Versuchsreihen, Massenbilanzen und Oelanalysen aus der Pyrolyse von

  12. Combined hostile fire and optics detection

    Science.gov (United States)

    Brännlund, Carl; Tidström, Jonas; Henriksson, Markus; Sjöqvist, Lars

    2013-10-01

    Snipers and other optically guided weapon systems are serious threats in military operations. We have studied a SWIR (Short Wave Infrared) camera-based system with capability to detect and locate snipers both before and after shot over a large field-of-view. The high frame rate SWIR-camera allows resolution of the temporal profile of muzzle flashes which is the infrared signature associated with the ejection of the bullet from the rifle. The capability to detect and discriminate sniper muzzle flashes with this system has been verified by FOI in earlier studies. In this work we have extended the system by adding a laser channel for optics detection. A laser diode with slit-shaped beam profile is scanned over the camera field-of-view to detect retro reflection from optical sights. The optics detection system has been tested at various distances up to 1.15 km showing the feasibility to detect rifle scopes in full daylight. The high speed camera gives the possibility to discriminate false alarms by analyzing the temporal data. The intensity variation, caused by atmospheric turbulence, enables discrimination of small sights from larger reflectors due to aperture averaging, although the targets only cover a single pixel. It is shown that optics detection can be integrated in combination with muzzle flash detection by adding a scanning rectangular laser slit. The overall optics detection capability by continuous surveillance of a relatively large field-of-view looks promising. This type of multifunctional system may become an important tool to detect snipers before and after shot.

  13. Ultra-fast flash observatory for detecting the early photons from gamma-ray bursts

    DEFF Research Database (Denmark)

    Lim, H.; Jeong, S.; Ahn, K.-B.

    Gamma-ray bursts (GRBs) are the most luminous transient events with short intense flashes that have been detected in random directions in the sky once or twice per day. Their durations have been measured in seconds, especially short GRBs with duration of <2 sec. The Ultra-Fast Flash Observatory (...

  14. Differentiation of debris-flow and flash-flood deposits: implications for paleoflood investigations

    Science.gov (United States)

    Waythomas, Christopher F.; Jarrett, Robert D.; ,

    1993-01-01

    Debris flows and flash floods are common geomorphic processes in the Colorado Rocky Mountain Front Range and foothills. Usually, debris flows and flash floods are associated with excess summer rainfall or snowmelt, in areas were unconsolidated surficial deposits are relatively thick and slopes are steep. In the Front Range and foothills, flash flooding is limited to areas below about 2300m whereas, debris flow activity is common throughout the foothill and alpine zones and is not necessarily elevation limited. Because flash floods and debris flows transport large quantities of bouldery sediment, the resulting deposits appear somewhat similar even though such deposits were produced by different processes. Discharge estimates based on debris-flow deposits interpreted as flash-flood deposits have large errors because techniques for discharge retrodiction were developed for water floods with negligible sediment concentrations. Criteria for differentiating between debris-flow and flash-flood deposits are most useful for deposits that are fresh and well-exposed. However, with the passage of time, both debris-flow and flash-flood deposits become modified by the combined effects of weathering, colluviation, changes in surface morphology, and in some instances removal of interstitial sediment. As a result, some of the physical characteristics of the deposits become more alike. Criteria especially applicable to older deposits are needed. We differentiate flash-flood from debris-flow and other deposits using clast fabric measurements and other morphologic and sedimentologic techniques (e.g., deposit morphology, clast lithology, particle size and shape, geomorphic setting).

  15. Urban flash flood vulnerability : spatial assessment and adaptation : a case study in Istanbul, Turkey

    NARCIS (Netherlands)

    Reyes-Acevedo, Martin Alejandro; Flacke, J.; Brussel, M.J.G.

    2011-01-01

    The Ayamama River basin in Istanbul is a densely populated urban area that is frequently impacted by flash floods causing damage to people and infrastructure. The IPCC expects that under climate change conditions, more intense precipitation will occur, leading to a higher risk of flash floods.

  16. Lightning Channels of Cloud-to-Ground Flashes Neutralizing Multiple Charge Regions Inside Winter Thunderclouds

    Science.gov (United States)

    Akita, Manabu; Yoshida, Satoru; Nakamura, Yoshitaka; Morimoto, Takeshi; Ushio, Tomoo; Kawasaki, Zen-Ichiro; Wang, Daohong

    Lightning Research Group of Osaka University (LRG-OU) has been developing and improving the VHF broadband digital interferometer (DITF) for thunderstorm observations. It enables us to locate the impulsive VHF radiation sources caused by lightning discharges with extremely high resolutions. As a result of the VHF observations during the 2007-2008 winter season in the Japan Sea coastal area, cloud-to-ground (CG) flashes that neutralize multiple charge regions inside thunderclouds are visualized by the VHF broadband DITF. The first flash is the positive CG flash that neutralizes multiple positive charge regions in a flash. The second flash is the bipolar lightning flash that neutralizes both positive and negative charge inside thunderclouds. In the case of bipolar lightning flashes, some tens millisecond after the return strokes, the subsequent negative breakdowns initiate from the proximities of the initiation points of the preceding negative stepped leaders. It was also found that the altitudes of negative charge regions are lower than 2km. The bipolar lightning flashes observed in this campaign neutralize positive charge after lowering the negative charge to the ground.

  17. Flash Study Analysis and the Music Learning Pro-Files Project

    Science.gov (United States)

    Cremata, Radio; Pignato, Joseph; Powell, Bryan; Smith, Gareth Dylan

    2016-01-01

    This paper introduces the Music Learning Profiles Project, and its methodological approach, flash study analysis. Flash study analysis is a method that draws heavily on extant qualitative approaches to education research, to develop broad understandings of music learning in diverse contexts. The Music Learning Profiles Project (MLPP) is an…

  18. Radiation Tests of Highly scaled, High-Density, Commercial, Nonvolatile NAND Flash Memories--Update 2011

    Science.gov (United States)

    Irom, Farokh; Nguyen, Duc N.

    2011-01-01

    High-density, commercial, nonvolatile flash memories with NAND architecture are now available from several manufacturers. This report examines SEE effects and TID response in single-level cell (SLC) 32Gb and multi-level cell (MLC) 64Gb NAND flash memories manufactured by Micron Technology.

  19. Radiation Tests of Highly Scaled, High-Density, Commercial, Nonvolatile NAND Flash Memories - Update 2010

    Science.gov (United States)

    Irom, Farokh; Nguyen, Duc N.

    2010-01-01

    High-density, commercial, nonvolatile flash memories with NAND architecture are now available from several manufacturers. This report examines SEE effects and TID response in single-level cell (SLC) and multi-level cell (MLC) NAND flash memories manufactured by Micron Technology.

  20. Pilot evaluation of hypnosis for the treatment of hot flashes in breast cancer survivors.

    Science.gov (United States)

    Elkins, Gary; Marcus, Joel; Stearns, Vered; Hasan Rajab, M

    2007-05-01

    This single arm, pilot study investigated the use of hypnosis to reduce hot flashes in 16 breast cancer survivors. Each patient provided baseline data and received 4 weekly sessions of hypnosis that followed a standardized transcript. Patients were also instructed in self-hypnosis. Throughout the clinical care, patients completed daily diaries of the frequency and severity of their hot flashes. Patients also completed baseline and post-treatment ratings of the degree to which hot flashes interfered with daily activities and quality of life. Results indicated a 59% decrease in total daily hot flashes and a 70% decrease in weekly hot flash scores from their baselines. There was also a significant decrease in the degree to which hot flashes interfered with daily activities for all measures including work, social activities, leisure activities, sleep, mood, concentration, relations with others, sexuality, enjoyment of life, and overall quality of life. This pilot study suggests that clinical hypnosis may be an effective non-hormonal and non-pharmacological treatment for hot flashes. A randomized, controlled clinical trial is planned to more definitively elucidate the efficacy and applicability of hypnosis for reducing hot flashes.

  1. A Modern Apparatus for Performing Flash Chromatography: An Experiment for the Organic Laboratory

    Science.gov (United States)

    Naumiec, Gregory R.; Del Padre, Angela N.; Hooper, Matthew M.; Germaine, Alison St.; DeBoef, Brenton

    2013-01-01

    A modern apparatus for performing flash chromatography using commercially available, prepacked silica cartridges has been developed. The key advantage of this system, when compared to traditional flash chromatography, is its use of commercially available silica cartridges, which obviates the need for students to handle silica gel. The apparatus…

  2. Increasing the computational speed of flash calculations with applications for compositional, transient simulations

    DEFF Research Database (Denmark)

    Rasmussen, Claus P.; Krejbjerg, Kristian; Michelsen, Michael Locht

    2006-01-01

    Approaches are presented for reducing the computation time spent on flash calculations in compositional, transient simulations. In a conventional flash calculation, the majority of the simulation time is spent on stability analysis, even for systems far into the single-phase region. A criterion has...

  3. Simulation of medical Q-switch flash-pumped Er:YAG laser

    Science.gov (United States)

    -Yan-lin, Wang; Huang-Chuyun; Yao-Yucheng; Xiaolin, Zou

    2011-01-01

    Er: YAG laser, the wavelength is 2940nm, can be absorbed strongly by water. The absorption coefficient is as high as 13000 cm-1. As the water strong absorption, Erbium laser can bring shallow penetration depth and smaller surrounding tissue injury in most soft tissue and hard tissue. At the same time, the interaction between 2940nm radiation and biological tissue saturated with water is equivalent to instantaneous heating within limited volume, thus resulting in the phenomenon of micro-explosion to removal organization. Different parameters can be set up to cut enamel, dentin, caries and soft tissue. For the development and optimization of laser system, it is a practical choice to use laser modeling to predict the influence of various parameters for laser performance. Aim at the status of low Erbium laser output power, flash-pumped Er: YAG laser performance was simulated to obtain optical output in theory. the rate equation model was obtained and used to predict the change of population densities in various manifolds and use the technology of Q-switch the simulate laser output for different design parameters and results showed that Er: YAG laser output energy can achieve the maximum average output power of 9.8W under the given parameters. The model can be used to find the potential laser systems that meet application requirements.

  4. Flash X-ray measurements on the shock-induced dispersal of a dense particle curtain

    Science.gov (United States)

    Wagner, Justin L.; Kearney, Sean P.; Beresh, Steven J.; DeMauro, Edward P.; Pruett, Brian O.

    2015-12-01

    The interaction of a Mach 1.67 shock wave with a dense particle curtain is quantified using flash radiography. These new data provide a view of particle transport inside a compressible, dense gas-solid flow of high optical opacity. The curtain, composed of 115-µm glass spheres, initially spans 87 % of the test section width and has a streamwise thickness of about 2 mm. Radiograph intensities are converted to particle volume fraction distributions using the Beer-Lambert law. The mass in the particle curtain, as determined from the X-ray data, is in reasonable agreement with that given from a simpler method using a load cell and particle imaging. Following shock impingement, the curtain propagates downstream and the peak volume fraction decreases from about 23 to about 4 % over a time of 340 µs. The propagation occurs asymmetrically, with the downstream side of the particle curtain experiencing a greater volume fraction gradient than the upstream side, attributable to the dependence of particle drag on volume fraction. Bulk particle transport is quantified from the time-dependent center of mass of the curtain. The bulk acceleration of the curtain is shown to be greater than that predicted for a single 115-µm particle in a Mach 1.67 shock-induced flow.

  5. Simulation of medical Q-switch flash-pumped Er:YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yanlin; Huang Chuyun; Yao Yucheng; Zou Xiaolin, E-mail: Wangyanlin0@126.com, E-mail: chuyunh@163.com, E-mail: yyuch@soho.com, E-mail: zouxiaol@126.com [Physics school, Hubei University of Technology, Wuhan, China 430068 (China)

    2011-01-01

    Er: YAG laser, the wavelength is 2940nm, can be absorbed strongly by water. The absorption coefficient is as high as 13000 cm{sup -1}. As the water strong absorption, Erbium laser can bring shallow penetration depth and smaller surrounding tissue injury in most soft tissue and hard tissue. At the same time, the interaction between 2940nm radiation and biological tissue saturated with water is equivalent to instantaneous heating within limited volume, thus resulting in the phenomenon of micro-explosion to removal organization. Different parameters can be set up to cut enamel, dentin, caries and soft tissue. For the development and optimization of laser system, it is a practical choice to use laser modeling to predict the influence of various parameters for laser performance. Aim at the status of low Erbium laser output power, flash-pumped Er: YAG laser performance was simulated to obtain optical output in theory. the rate equation model was obtained and used to predict the change of population densities in various manifolds and use the technology of Q-switch the simulate laser output for different design parameters and results showed that Er: YAG laser output energy can achieve the maximum average output power of 9.8W under the given parameters. The model can be used to find the potential laser systems that meet application requirements.

  6. Soft X-Ray Thomson Scattering in Warm Dense Hydrogen at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Faustlin, R R; Toleikis, S; Bornath, T; Doppner, T; Dusterer, S; Forster, E; Fortmann, C; Glenzer, S H; Gode, S; Gregori, G; Irsig, R; Laarmann, T; Lee, H J; Li, B; Meiwes-Broer, K; Mithen, J; Przystawik, A; Redlin, H; Redmer, R; Reinholz, H; Ropke, G; Tavella, F; Thiele, R; Tiggesbaumker, J; Uschmann, I; Zastrau, U; Tschentscher, T

    2009-07-15

    We present collective Thomson scattering with soft x-ray free electron laser radiation as a method to track the evolution of warm dense matter plasmas with {approx}200 fs time resolution. In a pump-probe scheme an 800 nm laser heats a 20 {micro}m hydrogen droplet to the plasma state. After a variable time delay in the order of ps the plasma is probed by an x-ray ultra violet (XUV) pulse which scatters from the target and is recorded spectrally. Alternatively, in a self-Thomson scattering experiment, a single XUV pulse heats the target while a portion of its photons are being scattered probing the target. From such inelastic x-ray scattering spectra free electron temperature and density can be inferred giving insight on relaxation time scales in plasmas as well as the equation of state. We prove the feasibility of this method in the XUV range utilizing the free electron laser facility in Hamburg, FLASH. We recorded Thomson scattering spectra for hydrogen plasma, both in the self-scattering and in the pump-probe mode using optical laser heating.

  7. SOLUSI PERMASALAHAN KOMPUTASI SKALA BESAR PADA SOFTWARE ADOBE FLASH DALAM PERANCANGAN MEDIA PEMBELAJARAN PENCARIAN EULERIAN CIRCUIT

    Directory of Open Access Journals (Sweden)

    Reza Wafdan

    2016-03-01

    Full Text Available Adobe Flash is a software that is used to build an interactive contents that can be attached in other things, such as presentations, games and e-learning. The Eulerian Circuit Search Instructional Media is one of examples in using Adobe Flash in building an interactive instructional media to solve graph theory problems. Visually, Adobe Flash is better than other programming software in general and it is the most suitable one for graph theory, as it uses graphics and visuals to solve problems. The weakness of Adobe Flash is when doing large scale calculations; such as when testing algorithms to find Eulerian circuits. Then an idea came about to complete the large scale calculations in Adobe Flash, which is commonly known as script time limit, with using other methodologies by changing script time limit on the settings, algorithms, partition the processes, and utulize the timers within the objects in the actionscript that handles the search algorithms of searching Eulerian circuit.

  8. Continuous background light significantly increases flashing-light enhancement of photosynthesis and growth of microalgae.

    Science.gov (United States)

    Abu-Ghosh, Said; Fixler, Dror; Dubinsky, Zvy; Iluz, David

    2015-01-01

    Under specific conditions, flashing light enhances the photosynthesis rate in comparison to continuous illumination. Here we show that a combination of flashing light and continuous background light with the same integrated photon dose as continuous or flashing light alone can be used to significantly enhance photosynthesis and increase microalgae growth. To test this hypothesis, the green microalga Dunaliella salina was exposed to three different light regimes: continuous light, flashing light, and concomitant application of both. Algal growth was compared under three different integrated light quantities; low, intermediate, and moderately high. Under the combined light regime, there was a substantial increase in all algal growth parameters, with an enhanced photosynthesis rate, within 3days. Our strategy demonstrates a hitherto undescribed significant increase in photosynthesis and algal growth rates, which is beyond the increase by flashing light alone. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Discrimination of multiple ranges per pixel in 3D flash ladar while minimizing the effects of diffraction

    Science.gov (United States)

    Neff, Brian J.; Cain, Stephen C.; Martin, Richard K.

    2011-09-01

    The goal of this work is to develop an algorithm to enhance the utility of 3D FLASH laser radar sensors through accurate ranging to multiple surfaces per image pixel. Using this algorithm it will be possible to realize numerous enhancements over both traditional Gaussian mixture modeling and single surface range estimation. While traditional Gaussian mixture modeling can effectively model the received pulse, we know that the received pulse is likely corrupted due to optical aberrations from the imaging system and the medium through which it is imaging. Additionally, only identifying a single surface per pulse may result in the loss of valuable information about partially obscured surfaces. Ultimately, this algorithm in conjunction with other recent research may allow for techniques that enhance the spatial resolution of an image, improve image registration and enable the detection of obscured targets with a single pulse.

  10. Nature's optics and our understanding of light

    Science.gov (United States)

    Berry, M. V.

    2015-01-01

    Optical phenomena visible to everyone have been central to the development of, and abundantly illustrate, important concepts in science and mathematics. The phenomena considered from this viewpoint are rainbows, sparkling reflections on water, mirages, green flashes, earthlight on the moon, glories, daylight, crystals and the squint moon. And the concepts involved include refraction, caustics (focal singularities of ray optics), wave interference, numerical experiments, mathematical asymptotics, dispersion, complex angular momentum (Regge poles), polarisation singularities, Hamilton's conical intersections of eigenvalues ('Dirac points'), geometric phases and visual illusions.

  11. The role of anxiety and hormonal changes in menopausal hot flashes.

    Science.gov (United States)

    Freeman, Ellen W; Sammel, Mary D; Lin, Hui; Gracia, Clarisa R; Kapoor, Shiv; Ferdousi, Tahmina

    2005-01-01

    To estimate the association of anxiety with menopausal hot flashes in the early transition to menopause. A randomly identified, population-based cohort of midlife women followed up for 6 years to assess reproductive hormones and other physical, emotional, and behavioral factors. At enrollment, the women were premenopausal, aged 35 to 47 years, and had regular menstrual cycles in the normal range. Enrollment was stratified to obtain equal numbers of African American (n = 219) and white (n = 217) women. At the 6-year endpoint, 32% of the women were in the early transition stage and 20% reached the late menopausal transition or were postmenopausal. Reports of hot flashes increased with the transition stages, which were determined by bleeding patterns. At endpoint, hot flashes were reported by 37% of the premenopausal women, 48% of those in the early transition, 63% of women in the late transition, and 79% of the postmenopausal women. Anxiety scores were significantly associated with the occurrence of hot flashes and were also significantly associated with the severity and frequency of hot flashes (each outcome at P menopause stage, depressive symptoms, smoking, body mass index, estradiol, race, age, and time. In a predictive model, anxiety levels at the previous assessment period and the change in anxiety from the previous assessment period significantly predicted hot flashes (P menopausal hot flashes after adjusting for other variables including menopause stage, smoking, and estradiol levels. Anxiety preceded hot flashes in this cohort. Additional studies are needed to examine the duration of menopausal hot flashes and to determine whether treatments that target anxiety effectively reduce menopausal hot flashes.

  12. A new interpretation of the historical records of observing Venus in daytime with naked eye: Focusing on the meteorological factors in the astronomical observation records

    Science.gov (United States)

    Jeon, Junhyeok; Kwon, Young-Joo; Lee, Yong-Sam

    2018-04-01

    Observing Venus during the daytime is challenging. However, observational data of Venus during the daytime can be found in history books from East Asian countries such as Korea, China and Japan. In this study, we are focused on data from Korean history book, and using records left in the Joseon wangjo sillok, one of the Korean history books from the Joseon dynasty (CE 1392-1910), tries to prove whether the reported observations were actual observation data. We collected these 4663 records from the Joseon wangjo sillok to determine whether they were actual observations, and to confirm the scientific validity of the records. When we looked at the distribution of observations on a yearly basis, we noticed that there were more observations in the fall and winter, while there were only limited numbers of observations in the spring. This difference in distribution suggests that observations were strongly affected by atmospheric conditions due to the weather. From the 4663 data collected, we found a cycle of about 1.6 years. The cycle of about 1.6 years is assumed to be related to the conjunction cycle of Venus. And, we found a cycle of about 1.0 years. The cycle of about 1.0 years is assumed to reflect the indirect effects of the Asian dust phenomenon. Our research result verified the record as actual observational data. In addition, this result verified that meteorological factors were involved in the recorded astronomical observation data. We think that our data can be helpful to climate studies on the natural sources of key climate-affecting aerosols.

  13. Search for high-energy muon neutrinos from the "naked-eye" GRB 080319B with the IceCube neutrino telescope

    DEFF Research Database (Denmark)

    Abbasi, R.; Abdou, Y.; Abu-Zayyad, T.

    2009-01-01

    the direct on-time window of 66 s and an extended window of about 300 s around the GRB, no excess was found above background. The 90% CL upper limit on the number of track-like events from the GRB is 2.7, corresponding to a muon neutrino fluence limit of 9.5x10^-3 erg cm^-2 in the energy range between 120 Te...

  14. Warm dense matter and Thomson scattering at FLASH

    International Nuclear Information System (INIS)

    Faeustlin, Roland Rainer

    2010-05-01

    X-ray free electron lasers are powerful tools to investigate moderately to strongly correlated solid density low temperature plasmas, named warm dense matter. These plasmas are of most interest for astrophysics and laser plasma interaction, particularly inertial confinement fusion. This work utilizes the ultrashort soft x-ray pulse duration and high brilliance of the free electron laser in Hamburg, FLASH, to generate warm dense matter and to study its ultrafast processes. The techniques applied are absorption measurement, emission spectroscopy and Thomson scattering. Radiative hydrodynamics and Thomson scattering simulations are used to investigate the impact of temperature and density gradients in the sample and to fit the experimental data. The measurements result in a comprehensive picture of soft x-ray matter interaction related to warm dense matter and yield insight into ultrafast equilibration and relaxation mechanisms, in particular impact ionization and radiative recombination. (orig.)

  15. Scattering Correction For Image Reconstruction In Flash Radiography

    International Nuclear Information System (INIS)

    Cao, Liangzhi; Wang, Mengqi; Wu, Hongchun; Liu, Zhouyu; Cheng, Yuxiong; Zhang, Hongbo

    2013-01-01

    Scattered photons cause blurring and distortions in flash radiography, reducing the accuracy of image reconstruction significantly. The effect of the scattered photons is taken into account and an iterative deduction of the scattered photons is proposed to amend the scattering effect for image restoration. In order to deduct the scattering contribution, the flux of scattered photons is estimated as the sum of two components. The single scattered component is calculated accurately together with the uncollided flux along the characteristic ray, while the multiple scattered component is evaluated using correction coefficients pre-obtained from Monte Carlo simulations.The arbitrary geometry pretreatment and ray tracing are carried out based on the customization of AutoCAD. With the above model, an Iterative Procedure for image restORation code, IPOR, is developed. Numerical results demonstrate that the IPOR code is much more accurate than the direct reconstruction solution without scattering correction and it has a very high computational efficiency

  16. Operational flash flood forecasting platform based on grid technology

    Science.gov (United States)

    Thierion, V.; Ayral, P.-A.; Angelini, V.; Sauvagnargues-Lesage, S.; Nativi, S.; Payrastre, O.

    2009-04-01

    Flash flood events of south of France such as the 8th and 9th September 2002 in the Grand Delta territory caused important economic and human damages. Further to this catastrophic hydrological situation, a reform of flood warning services have been initiated (set in 2006). Thus, this political reform has transformed the 52 existing flood warning services (SAC) in 22 flood forecasting services (SPC), in assigning them territories more hydrological consistent and new effective hydrological forecasting mission. Furthermore, national central service (SCHAPI) has been created to ease this transformation and support local services in their new objectives. New functioning requirements have been identified: - SPC and SCHAPI carry the responsibility to clearly disseminate to public organisms, civil protection actors and population, crucial hydrologic information to better anticipate potential dramatic flood event, - a new effective hydrological forecasting mission to these flood forecasting services seems essential particularly for the flash floods phenomenon. Thus, models improvement and optimization was one of the most critical requirements. Initially dedicated to support forecaster in their monitoring mission, thanks to measuring stations and rainfall radar images analysis, hydrological models have to become more efficient in their capacity to anticipate hydrological situation. Understanding natural phenomenon occuring during flash floods mainly leads present hydrological research. Rather than trying to explain such complex processes, the presented research try to manage the well-known need of computational power and data storage capacities of these services. Since few years, Grid technology appears as a technological revolution in high performance computing (HPC) allowing large-scale resource sharing, computational power using and supporting collaboration across networks. Nowadays, EGEE (Enabling Grids for E-science in Europe) project represents the most important

  17. Enhanced detection of terrestrial gamma-ray flashes by AGILE.

    Science.gov (United States)

    Marisaldi, M; Argan, A; Ursi, A; Gjesteland, T; Fuschino, F; Labanti, C; Galli, M; Tavani, M; Pittori, C; Verrecchia, F; D'Amico, F; Østgaard, N; Mereghetti, S; Campana, R; Cattaneo, P W; Bulgarelli, A; Colafrancesco, S; Dietrich, S; Longo, F; Gianotti, F; Giommi, P; Rappoldi, A; Trifoglio, M; Trois, A

    2015-11-16

    At the end of March 2015 the onboard software configuration of the Astrorivelatore Gamma a Immagini Leggero (AGILE) satellite was modified in order to disable the veto signal of the anticoincidence shield for the minicalorimeter instrument. The motivation for such a change was the understanding that the dead time induced by the anticoincidence prevented the detection of a large fraction of Terrestrial Gamma-Ray Flashes (TGFs). The configuration change was highly successful resulting in an increase of one order of magnitude in TGF detection rate. As expected, the largest fraction of the new events has short duration (<100 μs), and part of them has simultaneous association with lightning sferics detected by the World Wide Lightning Location Network. The new configuration provides the largest TGF detection rate surface density (TGFs/km 2 /yr) to date, opening prospects for improved correlation studies with lightning and atmospheric parameters on short spatial and temporal scales along the equatorial region.

  18. Measurements in shock physics: R and D in flash radiography

    International Nuclear Information System (INIS)

    Abraham, I.; Caron, M.; Etchessahar, B.; Le Dain, L.; Negre, J.P.; Partouche-Sebban, D.; Pichoff, N.; Toury, M.

    2010-01-01

    Within the simulation program of Cea-Dam, the radiographs produced by the AIRIX facility (induction Linac for flash radiography and X-ray imaging), provide fundamental experimental data for studying the dynamic behaviour of non nuclear materials under the effects of chemical explosive detonation. In order to improve the precision on the observed phenomena (locations of materials interfaces, development of instabilities, etc.), various research and development works have been performed on the modelling of the radiographic image formation, on the optimization of the radiographic chain and on the algorithms for image processing. This article presents in particular the studies on the various technologies of X-sources, on the new configurations of radiographic chains, and on the new digital imagers. (authors)

  19. On the origin of X-ray Flashes

    CERN Document Server

    Dar, Arnon; Dar, Arnon; Rujula, Alvaro De

    2003-01-01

    We use the very simple and successful cannonball (CB) model of gamma ray bursts (GRBs) and their afterglows (AGs) to analyze the observational data on X-ray flashes (XRFs) and their AGs. We show that the observations support the CB-model interpretation that XRFs, like GRBs, are produced by the explosions of core-collapse supernovae (SNe) akin to SN1998bw, by jets of highly-relativistic CBs. The XRFs and GRBs are intrinsically identical objects, but the XRFs are viewed from angles (relative to the jet direction) which are typically a few times larger than the typical viewing angles of ``classical'', long-duration GRBs. XRFs of shorter duration than the ones observed so far, like short GRBs, may be produced in Type Ia SNe akin to SN1997cy.

  20. Warm dense matter and Thomson scattering at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Faeustlin, Roland Rainer

    2010-05-15

    X-ray free electron lasers are powerful tools to investigate moderately to strongly correlated solid density low temperature plasmas, named warm dense matter. These plasmas are of most interest for astrophysics and laser plasma interaction, particularly inertial confinement fusion. This work utilizes the ultrashort soft x-ray pulse duration and high brilliance of the free electron laser in Hamburg, FLASH, to generate warm dense matter and to study its ultrafast processes. The techniques applied are absorption measurement, emission spectroscopy and Thomson scattering. Radiative hydrodynamics and Thomson scattering simulations are used to investigate the impact of temperature and density gradients in the sample and to fit the experimental data. The measurements result in a comprehensive picture of soft x-ray matter interaction related to warm dense matter and yield insight into ultrafast equilibration and relaxation mechanisms, in particular impact ionization and radiative recombination. (orig.)

  1. A non-invasive online photoionization spectrometer for FLASH2

    Science.gov (United States)

    Braune, Markus; Brenner, Günter; Dziarzhytski, Siarhei; Juranić, Pavle; Sorokin, Andrey; Tiedtke, Kai

    2016-01-01

    The stochastic nature of the self-amplified spontaneous emission (SASE) process of free-electron lasers (FELs) effects pulse-to-pulse fluctuations of the radiation properties, such as the photon energy, which are determinative for processes of photon–matter interactions. Hence, SASE FEL sources pose a great challenge for scientific investigations, since experimenters need to obtain precise real-time feedback of these properties for each individual photon bunch for interpretation of the experimental data. Furthermore, any device developed to deliver the according information should not significantly interfere with or degrade the FEL beam. Regarding the spectral properties, a device for online monitoring of FEL wavelengths has been developed for FLASH2, which is based on photoionization of gaseous targets and the measurements of the corresponding electron and ion time-of-flight spectra. This paper presents experimental studies and cross-calibration measurements demonstrating the viability of this online photoionization spectrometer. PMID:26698040

  2. PLZT thermal/flash protective goggles: device concepts and constraints

    International Nuclear Information System (INIS)

    Cutchen, J.T.

    1979-01-01

    In 1975 Sandia Laboratories began the design and development of PLZT Goggles for the US Air Force to provide protection from temporary flashblindness and permanent retinal burns caused by the brilliant flash of nuclear explosions. The user requirements, system and physical constraints, and use/storage environments were all considered in arriving at the final design goals. When the program began, there was no industrial capability to manufacture large-aperture PLZT materials or bonded lens assemblies. The technology has been established from a laboratory baseline in a brief period, and operational testing and evaluation by the Air Force has been completed. The goggles, identified as the EEU-2/P,, are now in production

  3. Simulating Terrestrial Gamma-ray Flashes using SWORD (Invited)

    Science.gov (United States)

    Gwon, C.; Grove, J.; Dwyer, J. R.; Mattson, K.; Polaski, D.; Jackson, L.

    2013-12-01

    We report on simulations of the relativistic feedback discharges involved with the production of terrestrial gamma-ray flashes (TGFs). The simulations were conducted using Geant4 using the SoftWare for the Optimization of Radiation Detectors (SWORD) framework. SWORD provides a graphical interface for setting up simulations in select high-energy radiation transport engines. Using Geant4, we determine avalanche length, the energy spectrum of the electrons and gamma-rays as they leave the field region, and the feedback factor describing the degree to which the production of energetic particles is self-sustaining. We validate our simulations against previous work in order to determine the reliability of our results. This work is funded by the Office of Naval Research.

  4. Thermal Conductivity Based on Modified Laser Flash Measurement

    Science.gov (United States)

    Lin, Bochuan; Ban, Heng; Li, Chao; Scripa, Rosalia N.; Su, Ching-Hua; Lehoczky, Sandor L.

    2005-01-01

    The laser flash method is a standard method for thermal diffusivity measurement. It employs single-pulse heating of one side of a thin specimen and measures the temperature response of the other side. The thermal diffusivity of the specimen can be obtained based on a one-dimensional transient heat transfer analysis. This paper reports the development of a theory that includes a transparent reference layer with known thermal property attached to the back of sample. With the inclusion of heat conduction from the sample to the reference layer in the theoretical analysis, the thermal conductivity and thermal diffusivity of sample can be extracted from the temperature response data. Furthermore, a procedure is established to select two points from the data to calculate these properties. The uncertainty analysis indicates that this method can be used with acceptable levels of uncertainty.

  5. Ghirardi-Rimini-Weber model with massive flashes

    Science.gov (United States)

    Tilloy, Antoine

    2018-01-01

    I introduce a modification of the Ghirardi-Rimini-Weber (GRW) model in which the flashes (or space-time collapse events) source a classical gravitational field. The resulting semiclassical theory of Newtonian gravity preserves the statistical interpretation of quantum states of matter in contrast with mean field approaches. It can be seen as a discrete version of recent proposals of consistent hybrid quantum classical theories. The model is in agreement with known experimental data and introduces new falsifiable predictions: (1) single particles do not self-interact, (2) the 1 /r gravitational potential of Newtonian gravity is cut off at short (≲10-7 m ) distances, and (3) gravity makes spatial superpositions decohere at a rate inversely proportional to that coming from the vanilla GRW model. Together, the last two predictions make the model experimentally falsifiable for all values of its parameters.

  6. Scattering Correction For Image Reconstruction In Flash Radiography

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Liangzhi; Wang, Mengqi; Wu, Hongchun; Liu, Zhouyu; Cheng, Yuxiong; Zhang, Hongbo [Xi' an Jiaotong Univ., Xi' an (China)

    2013-08-15

    Scattered photons cause blurring and distortions in flash radiography, reducing the accuracy of image reconstruction significantly. The effect of the scattered photons is taken into account and an iterative deduction of the scattered photons is proposed to amend the scattering effect for image restoration. In order to deduct the scattering contribution, the flux of scattered photons is estimated as the sum of two components. The single scattered component is calculated accurately together with the uncollided flux along the characteristic ray, while the multiple scattered component is evaluated using correction coefficients pre-obtained from Monte Carlo simulations.The arbitrary geometry pretreatment and ray tracing are carried out based on the customization of AutoCAD. With the above model, an Iterative Procedure for image restORation code, IPOR, is developed. Numerical results demonstrate that the IPOR code is much more accurate than the direct reconstruction solution without scattering correction and it has a very high computational efficiency.

  7. Flash floods in small Alpine catchments in a changing climate

    Science.gov (United States)

    Breinl, Korbinian; Di Baldassarre, Giuliano

    2017-04-01

    Climate change is expected to increase the frequency and intensity of hazardous meteorological and hydrological events in numerous mountainous areas. The mountain environment is becoming more and more important for urbanization and the tourism-based economy. Here we show new and innovative methodologies for assessing intensity and frequency of flash floods in small Alpine catchments, in South Tyrol (Italy), under climate change. This research is done within the STEEP STREAMS project, whereby we work closely with decision makers in Italian authorities, and the final goal is to provide them with clear guidelines on how to adapt current structural solutions for mitigating hazardous events under future climate conditions. To this end, we develop a coupled framework of weather generation (i.e. extrapolation of observations and trained with climate projections), time series disaggregation and hydrological modelling using the conceptual HBV model. One of the key challenges is the transfer of comparatively coarse RCM projections to small catchments, whose sizes range from only about 10km2 to 100km2. We examine different strategies to downscale the RCM data from e.g. the EURO-CORDEX dataset using our weather generator. The selected projections represent combinations of warmer, milder, drier and wetter conditions. In general, our main focus is to develop an improved understanding of the impact of the multiple sources of uncertainty in this modelling framework, and make these uncertainties tangible. The output of this study (i.e. discharge with a return period and associated uncertainty) will allow hydraulic and sediment transport modelling of flash floods and debris flows.

  8. LIQUIDARMOR CM Flashing and Sealant, High Impact Technology Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Hun, Diana E [ORNL; Bhandari, Mahabir S [ORNL

    2016-12-01

    Air leakage is responsible for about 1.1 quads of energy or 6% of the total energy used by commercial buildings in the US. Consequently, infiltration and exfiltration are among the largest envelope-related contributors to the heating, ventilation, and air conditioning loads in commercial buildings. New air sealing technologies have recently emerged that aim to improve the performance of air barrier systems by simplifying their installation procedure. LIQUIDARMORTM CM Flashing and Sealant is an example of these new advanced material technologies. This technology is a spray-applied sealant and liquid flashing and can span gaps that are up to ¼ in. wide without a supporting material. ORNL verified the performance of LIQUIDARMORTM CM with field tests and energy simulations from a building in which LIQUIDARMORTM CM was one of components of the air barrier system. The Homeland Security Training Center (HTC) at the College of DuPage in Glen Ellyn, IL, served as the demonstration site. Blower door test results show the average air leakage rate in the demonstration site to be 0.15 cfm/ft2 at 1.57 psf, or 63% lower than the 0.4 cfm at 1.57 psf specified in the 2015 International Energy Conservation Code (IECC). According to simulation results, HTC lowered its annual heating and cooling cost by about $3,000 or 9% compared to a similar building that lacked an air barrier system. This demonstration project serves as an example of the level of building envelope airtightness that can be achieved by using air barrier materials that are properly installed, and illustrates the energy and financial savings that such an airtight envelope could attain.

  9. Effectiveness of Flashing Brake and Hazard Systems in Avoiding Rear-End Crashes

    Directory of Open Access Journals (Sweden)

    Guofa Li

    2014-01-01

    Full Text Available Three experiments were conducted to examine the effectiveness of two forward crash warning systems, a flashing brake system and a flashing hazard system, using an advanced driving simulator. In Experiment 1, 20 subjects followed a lead vehicle with a desired time gap and braked when necessary. Results showed that time gap, velocity, and deceleration of the lead vehicle all significantly affected drivers’ brake response times. In Experiment 2, six brake response times to a sudden lead vehicle deceleration (0.6 g at 80 km/h were measured for six time gaps. Results showed that flashing brake system and flashing hazard system reduced drivers' brake response times by 0.14~0.62 s and 0.03~0.95 s, respectively, in the various situations tested. The effects of flashing color and illuminated size on drivers' brake response times were examined in Experiment 3. Results showed that flashing amber lamps reduced drivers' brake response times significantly by 0.11 s (10% on average compared with red lamps. These findings demonstrate the effectiveness of both flashing systems in reducing drivers' brake response times in urgent situations and may warrant further consideration by manufacturers.

  10. A pilot study of magnetic therapy for hot flashes after breast cancer.

    Science.gov (United States)

    Carpenter, Janet S; Wells, Nancy; Lambert, Beth; Watson, Peggy; Slayton, Tami; Chak, Bapsi; Hepworth, Joseph T; Worthington, W Bradley

    2002-04-01

    The purpose of this randomized placebo-controlled crossover pilot study was to evaluate the effectiveness and acceptability of magnetic therapy for hot flashes among breast cancer survivors. Participants completed a 24-hour baseline hot-flash monitoring session, wore the magnetic devices or placebo for 3 days, completed an after-treatment hot-flash monitoring session, experienced a 10-day washout period, and then crossed over to the opposite study arm. Magnetic devices and placebos were placed on 6 acupressure sites corresponding to hot-flash relief. Complete data were available from 11 survivors of breast cancer. Results indicated magnetic therapy was no more effective than placebo in decreasing hot-flash severity, and contrary to expectations, placebo was significantly more effective than magnets in decreasing hot-flash frequency, bother, interference with daily activities, and overall quality of life. Implications for clinical practice and future research include the need to explore alternative interventions aimed at alleviating hot flashes in this population.

  11. Flashing of high-pressure saturated water into the pool water

    International Nuclear Information System (INIS)

    Takamasa, Tomoji; Kondo, Koichi; Aya, Izuo.

    1997-01-01

    This paper presents an experimental study on a saturated high-pressure water discharging into a water pool. The purpose of the experiment is to clarify the phenomena that occur by a blow-down of the water from the pressure vessel into the water-filled containment in the case of a wall-crack accident or a LOCA in a passive safety reactor. The results show that a flashing oscillation (FO) occurs when the water discharges into the pool, under specified experimental conditions. The range of the flashing location oscillates between a point very close to and some distance away from the vent hole. The pressures in the vent tube and water pool constantly fluctuate due to the flashing oscillation. The pressure oscillation and alternating flashing location might be caused by the balancing action between the supply of saturated water, flashing at the control volume and steam condensation on the steam-water interface. The frequencies of FO, or frequencies of pressure oscillation and alternating flashing location, increased as water subcooling increased, and as discharging pressure and vent hole diameter decreased. A linear analysis was conducted using a spherical flashing bubble model in which the motion of bubble is controlled by steam condensation. The effects of these parameters on the period of FO in the experiments can be predicted well by the analysis. (author)

  12. Saccadic Suppression of Flash Detection: the Uncertainty Theory VS. Alternative Theories.

    Science.gov (United States)

    Greenhouse, Daniel Stephen

    involved the generation of receiver operating characteristic (ROC) curves. The results, interpreted within the framework of the Theory of Signal Detectability, served to establish the presence of uncertainty for two of four subjects. The magnitude of uncertainty, estimated from the ROC curves, was comparable with that which could account for the decline in detectability observed in earlier experiments, and we concluded that uncertainty could account entirely for suppression in these subjects. In the final experiment, we employed spatially separate marker flashes as cues in an attempt to reduce uncertainty. For one of two subjects, detectability of a stimulus presented during a saccade improved substantially when the markers were employed. This result was interpreted in terms of the uncertainty theory. The evidence, in total, leads us to conclude that, with respect to other theories which have appeared in the literature, the uncertainty theory of saccadic suppression is a viable alternative. ('1)Helmholtz, H. (1866) A Treatise on Physiological Optics, Vol. 3, Dover Publications, New York (1963). ('2)Matin, L., Matin, E., and Pearce, D. (1969) Perception and Psychophysics 5, 65-80. ('3)Matin, L., Matin, E., and Pola, J. (1970) Perception and Psychophysics 8, 9-14. ('4)Matin, L. and Matin, E. (1972) Bibliotheca Ophtalmologica 82, 358-368. ('5)Cohn, T. C. and Lasley, D. J. (1974) J. Opt. Soc. Am. 64, 1715-1719. ('6)Lasley, D. J., Greenhouse, D. S., and Cohn, T. C. (1976), J. Opt. Soc. Am. 66, 1079 (abstract). ('7)Greenhouse, D. S. and Cohn, T. C. (1978) J. Opt. Soc. Am. 68, 266-267. ('8)Matin, L. (1965) Personal communication to E. Matin reported in Matin, E. (1974), Psychological Bulletin 81, 899-917. ('9)Latour, P. (1962), Vision Research 2, 261-262. ('10)Volkmann, F. (1962), J. Opt. Soc. Am. 52, 571-578. ('11)Zuber, B. and Stark, L. (1966) Experimental Neurology 16, 65-79. ('12)Richards, W. (1969), J. Opt. Soc. Am. 59, 617-623. ('13)Matin, E., Clymer, A., and Matin, L

  13. Nonlinear dynamic model of a gear-rotor-bearing system considering the flash temperature

    Science.gov (United States)

    Gou, Xiangfeng; Zhu, Lingyun; Qi, Changjun

    2017-12-01

    The instantaneous flash temperature is an important factor for gears in service. To investigate the effect of the flash temperature of a tooth surface on the dynamics of the spur gear system, a modified nonlinear dynamic model of a gear-rotor-bearing system is established. The factors such as the contact temperature of the tooth surface, time-varying stiffness, tooth surface friction, backlash, the comprehensive transmission error and so on are considered. The flash temperature of a tooth surface of pinion and gear is formulated according to Blok's flash temperature theory. The mathematical expression of the contact temperature of the tooth surface varied with time is derived and the tooth profile deformation caused by the change of the flash temperature of the tooth surface is calculated. The expression of the mesh stiffness varied with the flash temperature of the tooth surface is derived based on Hertz contact theory. The temperature stiffness is proposed and added to the nonlinear dynamic model of the system. The influence of load on the flash temperature of the tooth surface is analyzed in the parameters plane. The variation of the flash temperature of the tooth surface is studied. The numerical results indicate that the calculated method of the flash temperature of the gear tooth surface is effective and it can reflect the rules for the change of gear meshing temperature and sliding of the gear tooth surface. The effects of frequency, backlash, bearing clearance, comprehensive transmission error and time-varying stiffness on the nonlinear dynamics of the system are analyzed according to the bifurcation diagrams, Top Lyapunov Exponent (TLE) spectrums, phase portraits and Poincaré maps. Some nonlinear phenomena such as periodic bifurcation, grazing bifurcation, quasi-periodic bifurcation, chaos and its routes to chaos are investigated and the critical parameters are identified. The results provide an understanding of the system and serve as a useful reference

  14. A Novel Dual Traffic/Flash Flood Monitoring System Using Passive Infrared/Ultrasonic Sensors

    KAUST Repository

    Mousa, Mustafa

    2015-10-19

    Floods are the most common type of natural disaster, causing thousands of casualties every year. Among these events, urban flash floods are particularly deadly because of the short timescales on which they occur, and because of the high concentration of population in cities. Since most flash flood casualties are caused by a lack of information, it is critical to generate accurate and detailed warnings of flash floods. However, deploying an infrastructure that solely monitor flash floods makes little economic sense, since the average periodicity of catastrophic flash floods exceeds the lifetime of a typical sensor network. To address this issue, we propose a new sensing device that can simultaneously monitor urban flash floods and another phenomenon of interest (traffic congestion on the present case). This sensing device is based on the combination of an ultrasonic rangefinder with one or multiple remote temperature sensors. We show an implementation of this device, and illustrate its performance in both traffic flow and flash flood sensing. Field data shows that the sensor can detect vehicles with a 99% accuracy, in addition to estimating their speed and classifying them in function of their length. The same sensor can also monitor urban water levels with an accuracy of less than 2 cm. Two of the sensors have been deployed in a flood prone area, where they captured the only (minor) flash flood that occurred over the one-year test period, with no false detection, and an agreement in the estimated water level estimate (during the flash flood event) of about 2 cm.

  15. Report on in-situ studies of flash sintering of uranium dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Raftery, Alicia Marie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-24

    Flash sintering is a novel type of field assisted sintering that uses an electric field and current to provide densification of materials on very short time scales. The potential for field assisted sintering techniques to be used in producing nuclear fuel is gaining recognition due to the potential economic benefits and improvements in material properties. The flash sintering behavior has so far been linked to applied and material parameters, but the underlying mechanisms active during flash sintering have yet to be identified. This report summarizes the efforts to investigate flash sintering of uranium dioxide using dilatometer studies at Los Alamos National Laboratory and two separate sets of in-situ studies at Brookhaven National Laboratory’s NSLS-II XPD-1 beamline. The purpose of the dilatometer studies was to understand individual parameter (applied and material) effects on the flash behavior and the purpose of the in-situ studies was to better understand the mechanisms active during flash sintering. As far as applied parameters, it was found that stoichiometry, or oxygen-to-metal ratio, has a significant effect on the flash behavior (time to flash and speed of flash). Composite systems were found to have degraded sintering behavior relative to pure UO2. The critical field studies are complete for UO2.00 and will be analyzed against an existing model for comparison. The in-situ studies showed that the strength of the field and current are directly related to the sample temperature, with temperature-driven phase changes occurring at high values. The existence of an ‘incubation time’ has been questioned, due to a continuous change in lattice parameter values from the moment that the field is applied. Some results from the in-situ experiments, which should provide evidence regarding ion migration, are still being analyzed. Some preliminary conclusions can be made from these results with regard to using field assisted sintering to

  16. CoAdapt P300 speller: optimized flashing sequences and online learning

    OpenAIRE

    Thomas, Eoin; Daucé, Emmanuel; Devlaminck, Dieter; Mahé, Loïc; Carpentier, Alexandra; Munos, Rémi; Perrin, Margaux; Maby, Emmanuel; Mattout, Jérémie; Papadopoulo, Théodore; Clerc, Maureen

    2014-01-01

    International audience; This paper presents a series of recent improvements made on the P300 speller paradigm in the context of the CoAdapt project. The flashing sequence is elicited by a new design called RIPRAND, in which the flashing rate of elements can be controlled independently of grid cardinality. Element-based evidence accumulation allows early-stopping of the flashes as soon as the symbol has been detected with confidence. No calibration session is nec-essary, thanks to a mixture-of...

  17. Selective serotonin-reuptake inhibitors for the treatment of hot flashes.

    Science.gov (United States)

    De Sloover Koch, Yvonne; Ernst, Michael E

    2004-01-01

    To review the literature evaluating the use of selective serotonin-reuptake inhibitors (SSRIs) for the treatment of hot flashes. Biomedical literature was accessed through MEDLINE (1966-June 2003), MD Consult, and references of reviewed articles. Key search terms used were hot flashes, vasomotor symptoms, antidepressants, and SSRIs. Recent evidence from the Women's Health Initiative precludes the use of traditional hormonal therapy in some women. Nonhormonal therapies are possible options, but conflicting evidence of efficacy exists. Although further studies are warranted, preliminary data suggest that SSRIs are generally modestly successful in reducing the frequency and severity of hot flashes.

  18. Fire hazard analysis of alcohol aqueous solution and Chinese liquor based on flash point

    Science.gov (United States)

    Chen, Qinpei; Kang, Guoting; Zhou, Tiannian; Wang, Jian

    2017-10-01

    In this paper, a series of experiments were conducted to study the flash point of alcohol aqueous solution and Chinese liquor. The fire hazard of the experimental results was analysed based on the standard GB50160-2008 of China. The result shows open-cup method doesn’t suit to alcohol aqueous solution. On the other hand, the closed-cup method shows good applicability. There is a non-linear relationship between closed-cup flash point and alcohol volume concentration. And the prediction equation established in this paper shows good fitting to the flash point and fire hazard classification of Chinese liquor.

  19. [Laser flash photolysis, EPR and Raman studies of liquids at elevated pressures

    Energy Technology Data Exchange (ETDEWEB)

    Eyring, E.M.

    1992-01-01

    The proposed research will solve a number of analytical chemical problems in solutions with measurement techniques that benefit from the use of elevated hydrostatic pressures: stopped-flow spectrophotometry (Gd[sup 3+] + L(ligand), [RuL[sub 5]H[sub 2]O][sup 2+], laser flash photolysis of Mo(CO)[sub 6] + L, flash photolysis of binuclear metalloproteins), EPR spectroscopy (Gd[sup 3+] ion-exchanged into ETS-10 and ETAS-10 molecular sieves), laser flash photolysis kinetic studies of Mo(CO)[sub 6]-2,2'-bipyridine, and electrochemical studies of metalloporphyrins using resonance Raman spectroscopy.

  20. [Laser flash photolysis, EPR and Raman studies of liquids at elevated pressures

    Energy Technology Data Exchange (ETDEWEB)

    Eyring, E.M.

    1992-10-01

    The proposed research will solve a number of analytical chemical problems in solutions with measurement techniques that benefit from the use of elevated hydrostatic pressures: stopped-flow spectrophotometry (Gd{sup 3+} + L(ligand), [RuL{sub 5}H{sub 2}O]{sup 2+}, laser flash photolysis of Mo(CO){sub 6} + L, flash photolysis of binuclear metalloproteins), EPR spectroscopy (Gd{sup 3+} ion-exchanged into ETS-10 and ETAS-10 molecular sieves), laser flash photolysis kinetic studies of Mo(CO){sub 6}-2,2`-bipyridine, and electrochemical studies of metalloporphyrins using resonance Raman spectroscopy.

  1. Characteristics of cloud-to-ground lightning flashes along the east coast of the United States

    Science.gov (United States)

    Orville, R. E., Sr.; Pyle, R. B.; Henderson, R. W.; Orville, R. E., Jr.; Weisman, R. A.

    1985-01-01

    A magnetic direction-finding network for the detection of lightning cloud-to-ground strikes has been installed along the east coast of the United States. Most of the lightning occurring from Maine to Florida and as far west as Ohio is detected. Time, location, flash polarity, stroke count, and peak signal amplitude are recorded in real time. Flash locations, time, and polarity are displayed routinely for research and operational purposes. Flash density maps have been generated for the summers of 1983 and 1984, when the network only extended to North Carolina, and show density maxima in northern Virginia and Maryland.

  2. Adaptive mesh simulations of astrophysical detonations using the ASCI flash code

    Science.gov (United States)

    Fryxell, B.; Calder, A. C.; Dursi, L. J.; Lamb, D. Q.; MacNeice, P.; Olson, K.; Ricker, P.; Rosner, R.; Timmes, F. X.; Truran, J. W.; Tufo, H. M.; Zingale, M.

    2001-08-01

    The Flash code was developed at the University of Chicago as part of the Department of Energy's Accelerated Strategic Computing Initiative (ASCI). The code was designed specifically to simulate thermonuclear flashes in compact stars (white dwarfs and neutron stars). This paper will give a brief introduction to the astrophysics problems we wish to address, followed by a description of the current version of the Flash code. Finally, we discuss two simulations of astrophysical detonations that we have carried out with the code. The first is of a helium detonation in an X-ray burst. The other simulation models a carbon detonation in a Type Ia supernova explosion. .

  3. Colors and absolute magnitudes of the optical afterglows of X-ray flashes

    Czech Academy of Sciences Publication Activity Database

    Šimon, Vojtěch; Hudec, René; Pizzichini, G.

    2006-01-01

    Roč. 121, č. 12 (2006), s. 1579-1581 ISSN 1594-9982. [Swift and GRBs: Unveiling the Relativistic Universe. Venezia, 05.06.2006-09.06.2006] R&D Projects: GA AV ČR IAA3003206 Grant - others:EU(XE) ESA-PECS project No. 98023; EU(XE) ESA PRODEX INTEGRAL 90108 Institutional research plan: CEZ:AV0Z10030501 Source of funding: V - iné verejné zdroje ; V - iné verejné zdroje Keywords : gamma-ray bursts * supernovae * radiation mechanisms Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 0.351, year: 2006

  4. Improving the flash flood frequency analysis applying dendrogeomorphological evidences

    Science.gov (United States)

    Ruiz-Villanueva, V.; Ballesteros, J. A.; Bodoque, J. M.; Stoffel, M.; Bollschweiler, M.; Díez-Herrero, A.

    2009-09-01

    Flash floods are one of the natural hazards that cause major damages worldwide. Especially in Mediterranean areas they provoke high economic losses every year. In mountain areas with high stream gradients, floods events are characterized by extremely high flow and debris transport rates. Flash flood analysis in mountain areas presents specific scientific challenges. On one hand, there is a lack of information on precipitation and discharge due to a lack of spatially well distributed gauge stations with long records. On the other hand, gauge stations may not record correctly during extreme events when they are damaged or the discharge exceeds the recordable level. In this case, no systematic data allows improvement of the understanding of the spatial and temporal occurrence of the process. Since historic documentation is normally scarce or even completely missing in mountain areas, tree-ring analysis can provide an alternative approach. Flash floods may influence trees in different ways: (1) tilting of the stem through the unilateral pressure of the flowing mass or individual boulders; (2) root exposure through erosion of the banks; (3) injuries and scars caused by boulders and wood transported in the flow; (4) decapitation of the stem and resulting candelabra growth through the severe impact of boulders; (5) stem burial through deposition of material. The trees react to these disturbances with specific growth changes such as abrupt change of the yearly increment and anatomical changes like reaction wood or callus tissue. In this study, we sampled 90 cross sections and 265 increment cores of trees heavily affected by past flash floods in order to date past events and to reconstruct recurrence intervals in two torrent channels located in the Spanish Central System. The first study site is located along the Pelayo River, a torrent in natural conditions. Based on the external disturbances of trees and their geomorphological position, 114 Pinus pinaster (Ait

  5. Implementing the national AIGA flash flood warning system in France

    Science.gov (United States)

    Organde, Didier; Javelle, Pierre; Demargne, Julie; Arnaud, Patrick; Caseri, Angelica; Fine, Jean-Alain; de Saint Aubin, Céline

    2015-04-01

    The French national hydro-meteorological and flood forecasting centre (SCHAPI) aims to implement a national flash flood warning system to improve flood alerts for small-to-medium (up to 1000 km2) ungauged basins. This system is based on the AIGA method, co-developed by IRSTEA these last 10 years. The method, initially set up for the Mediterranean area, is based on a simple event-based hourly hydrologic distributed model run every 15 minutes (Javelle et al. 2014). The hydrologic model ingests operational radar-gauge rainfall grids from Météo-France at a 1-km² resolution to produce discharges for successive outlets along the river network. Discharges are then compared to regionalized flood quantiles of given return periods and warnings (expressed as the range of the return period estimated in real-time) are provided on a river network map. The main interest of the method is to provide forecasters and emergency services with a synthetic view in real time of the ongoing flood situation, information that is especially critical in ungauged flood prone areas. In its enhanced national version, the hourly event-based distributed model is coupled to a continuous daily rainfall-runoff model which provides baseflow and a soil moisture index (for each 1-km² pixel) at the beginning of the hourly simulation. The rainfall-runoff models were calibrated on a selection of 700 French hydrometric stations with Météo-France radar-gauge reanalysis dataset for the 2002-2006 period. To estimate model parameters for ungauged basins, the 2 hydrologic models were regionalised by testing both regressions (using different catchment attributes, such as catchment area, soil type, and climate characteristic) and spatial proximity techniques (transposing parameters from neighbouring donor catchments), as well as different homogeneous hydrological areas. The most valuable regionalisation method was determined for each model through jack-knife cross-validation. The system performance was then

  6. The UFFO (Ultra Fast Flash Observatory) Pathfinder: Science and Mission

    DEFF Research Database (Denmark)

    Chen, P.; Ahmad, S.; Ahn, K.

    in a more rigorous test of current internal shock models, probe the extremes of bulk Lorentz factors, provide the first early and detailed measurements of fast-rise GRB optical light curves, and help verify the prospect of GRB as a new standard candle. We will describe the science and the mission...... GRB, remain practically unknown. We have developed methods for reaching sub-minute and sub-second timescales in a small spacecraft observatory. Rather than slewing the entire spacecraft to aim the optical instrument at the GRB position, we use rapidly moving mirror to redirect our optical beam...

  7. The reproductive and developmental toxicity of High Flash Aromatic Naphtha.

    Science.gov (United States)

    McKee, R H; Wong, Z A; Schmitt, S; Beatty, P; Swanson, M; Schreiner, C A; Schardein, J L

    1990-01-01

    Catalytic reforming is a refining process that converts naphthenes to aromatics by dehydrogenation to make higher octane gasoline blending components. A portion of this wide boiling range hydrocarbon stream can be separated by distillation and used for other purposes. One such application is a mixture of predominantly 9-carbon aromatic molecules (C9 aromatics, primarily isomers of ethyltoluene and trimethylbenzene), which is removed and used as a solvent--High Flash Aromatic Naphtha. A program was initiated to assess the toxicological properties of High Flash Aromatic Naphtha since there may be human exposure through inhalation or external body contact. The current study was conducted to assess the potential for developmental toxicity in the mouse and for reproductive toxicity in the rat. In the developmental toxicity study in CD-1 mice, exposure of dams by inhalation to near lethal levels (1500 ppm) resulted in fetal mortality, reduced weight, delayed ossification, and an increased incidence of cleft palate. At 500 ppm, a level at which maternal weight gain was slightly reduced, fetal weight gain was also reduced, but there was no other evidence of developmental effects. The lowest exposure level (100 ppm) did not cause any maternal or developmental toxicity. There was no consistent evidence of reproductive toxicity in rats, even at exposure levels which resulted in significantly reduced parental weight gain. In addition, when parental exposure was stopped on GD (gestation day) 20, birth weights as well as postnatal survival were generally similar to control values, even in the 1500 ppm exposure group. Postnatal weight gain was also similar to controls early in weaning, but, if maternal exposure was reinitiated, weight gain was reduced in the high exposure group. However, when exposure was continued until delivery, pups in the high exposure group exhibited reduced litter size, birth weight and poor survival. Thus it was likely that the reduction in fetal weight

  8. The Kinematic and Microphysical Control of Storm Integrated Lightning Flash Extent

    Science.gov (United States)

    Carey, Lawrence D.; Koshak, William J.; Peterson, Harold S.; Shultz, Elise; Matthee, Retha; Shultz, Christopher J.; Petersen, Walter A.; Bain, Lamont

    2013-01-01

    To investigate the kinematic and microphysical control of lightning properties, particularly those that may govern the production of nitrogen oxides (NO(x)) in thunderstorms, such as flash rate, type (intracloud (IC) vs. cloud-to-ground (CG)) and extent.

  9. Analysis of photoenzymatic repair of UV lesions in DNA by single light flashes. XII

    International Nuclear Information System (INIS)

    Harm, W.

    1979-01-01

    Yeast photoreactivity enzyme (PRE) preilluminated with wavelengths ranging from the near-UV to the red spectral region, forms with 254 nm-irradiated transforming DNA of Haemophilus influenzae enzyme-substrate complexes that are more efficiently photorepaired than complexes formed from non-preilluminated PRE. The action spectrum for this 'preillumination effect', previously shown to have a maximum in the near-UV region, has another maximum near 577 nm. In complexes formed from non-preilluminated PRE the repair probability per incident photon is only about 25% of that in complexes fromed from preilluminated PRE, if low-intensity photoreactivating light is applied continuously or as a sequence of flashes. However, photoreactivating light in the form of a single, high-intensity flash of 1 msec duration raises the repair probability to >50%. Two light flashes, discharged with a delay of slightly more than a millisecond, may already achieve less photorepair than the same energy given as a single flash. (Auth.)

  10. FLASH Technology: Full-Scale Hospital Waste Water Treatments Adopted in Aceh

    Science.gov (United States)

    Rame; Tridecima, Adeodata; Pranoto, Hadi; Moesliem; Miftahuddin

    2018-02-01

    A Hospital waste water contains a complex mixture of hazardous chemicals and harmful microbes, which can pose a threat to the environment and public health. Some efforts have been carried out in Nangroe Aceh Darussalam (Aceh), Indonesia with the objective of treating hospital waste water effluents on-site before its discharge. Flash technology uses physical and biological pre-treatment, followed by advanced oxidation process based on catalytic ozonation and followed by GAC and PAC filtration. Flash Full-Scale Hospital waste water Treatments in Aceh from different district have been adopted and investigated. Referring to the removal efficiency of macro-pollutants, the collected data demonstrate good removal efficiency of macro-pollutants using Flash technologies. In general, Flash technologies could be considered a solution to the problem of managing hospital waste water.

  11. Flash Extraction and Physicochemical Characterization of Oil from Elaeagnus mollis Diels Seeds.

    Science.gov (United States)

    Kan, Lina; Wang, Lin; Ding, Qingzhen; Wu, Yanwen; Ouyang, Jie

    2017-04-03

    A flash extraction method was used to isolate Elaeagnus mollis oil (EMO). The optimal extraction parameters, sample/solvent ratio and extraction temperature, were determined to be 1:10 (g/mL) and 40°C, respectively. Especially, the extraction yield reached 49.30% when the extraction time was as short as 2 min. No obvious difference was observed in fatty acid composition, iodine value, saponification number, total phenolic content and tocopherol content between flash-extracted EMO and Soxhlet-extracted EMO, but their physicochemical values were lower than those of cold-pressed EMO. Cold-pressed EMO had higher oxidation stability, DPPH (1-diphenyl-2-picrylhydrazyl) and hydroxyl radical-scavenging activities than flash-extracted EMO and Soxlet extracted EMO. The flash extraction is demonstrated to be an alternative, efficient method for the vegetable oil production.

  12. PENGEMBANGAN MEDIA PEMBELAJARAN DALAM BENTUK MACROMEDIA FLASH MATERI TABUNG UNTUK SMP KELAS IX

    Directory of Open Access Journals (Sweden)

    Majidah Khairani

    2016-05-01

    Full Text Available The purpose of the research is to produce media-based math learning macromedia flash on the subject of the cylinder in the junior class IX valid, practical and efective for her then experimented to see the potential effects of media-based learning macromedia flash cylinder subject to students' understanding of concepts. The method used is the development of research that consists of three phases: define, design and develop. The material validation result 74,64 was in good. The media was tried out at SMPN 44 Sijunjung. The students’ response in small and large-scale try out result 87,56 were in very good category (very practical. Obtained from testing the potential effects of instructional media using macromedia flash to the understanding of the concept of students is 78 in both categories. It can be concluded that the macromedia flash media-based learning subject that researchers develop effective cilinder used in the learning of mathematics.

  13. Investigation of Current Spike Phenomena During Heavy Ion Irradiation of NAND Flash Memories

    Science.gov (United States)

    Oldham, Timothy R.; Berg, Melanie; Friendlich, Mark; Wilcox, Ted; Seidleck, Christina; LaBel, Kenneth A.; Irom, Farokh; Buchner, Steven P.; McMorrow, Dale; Mavis, David G.; hide

    2011-01-01

    A series of heavy ion and laser irradiations were performed to investigate previously reported current spikes in flash memories. High current events were observed, however, none matches the previously reported spikes. Plausible mechanisms are discussed.

  14. 3D Flash LIDAR Real-Time Embedded Processing, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — 3D Flash LIDAR (3DFL) is ideal for determining real-time spacecraft trajectory, speed and orientation to the planet surface, as well as evaluating potential hazards...

  15. Gone in a Flash: Manipulation of Audiovisual Temporal Integration Using Transcranial Magnetic Stimulation

    Directory of Open Access Journals (Sweden)

    Roy eHamilton

    2013-09-01

    Full Text Available While converging evidence implicates the right inferior parietal lobule in audiovisual integration, its role has not been fully elucidated by direct manipulation of cortical activity. Replicating and extending an experiment initially reported by Kamke, Vieth, Cottrell, and Mattingley (2012, we employed the sound-induced flash illusion, in which a single visual flash, when accompanied by two auditory tones, is misperceived as multiple flashes (Wilson, 1987; Shams, et al., 2000. Slow repetitive (1Hz TMS administered to the right angular gyrus, but not the right supramarginal gyrus, induced a transient decrease in the Peak Perceived Flashes (PPF, reflecting reduced susceptibility to the illusion. This finding independently confirms that perturbation of networks involved in multisensory integration can result in a more veridical representation of asynchronous auditory and visual events and that cross-modal integration is an active process in which the objective is the identification of a meaningful constellation of inputs, at times at the expense of accuracy.

  16. Introduction to FLASH 3.0, with application to supersonic turbulence

    International Nuclear Information System (INIS)

    Dubey, A; Reid, L B; Fisher, R

    2008-01-01

    FLASH is a flexible, modular and parallel application code capable of simulating the compressible, reactive flows found in many astrophysical environments. It is a collection of inter-operable modules which can be combined to generate different applications. FLASH is gaining increasing recognition as a community code with a fairly wide external user base. Unlike other component-based codes that have historically met with varying degrees of success. FLASH started out as a more traditional scientific code and evolved into a modular one as insights were gained into manageability, extensibility and efficiency. As a result, the development of the code has been, and continues to be, driven by the dual goals of application requirements and modularity. In this tutorial paper, we give an overview of the FLASH code architecture and capabilities. We also include an example of a customized application adapted from the sample applications provided with the code distribution.

  17. Straightforward dimensionless experimental formulae for flash point of binary mixtures of two flammable components

    Directory of Open Access Journals (Sweden)

    Hristova Mariana

    2012-01-01

    Full Text Available Dimensionless experimental formulae based on a rational reciprocal function for correlation of flashpoint data of binary mixtures of two flammable components have been developed. The formulae are based on data obtained from flash-point experiments. The proposed approach requires only two coefficients, molar fraction of components and flashpoint temperatures of the pure flammable components to be known in advance. Literature data were used for formulae verification and validation obtained results indicate that accuracy is comparable and to some extent better than that of conventional flash point prediction models. Dimensional analysis and scaling of data have been performed in order to define the correct construction of the equation fitting flash-point data in dimensionless form using the independent variables suggested by Catoire. Stefan number relevant flash-point of a single compound or a blend has been defined.

  18. Helicopter Flight Test of a Compact, Real-Time 3-D Flash Lidar for Imaging Hazardous Terrain During Planetary Landing

    Science.gov (United States)

    Roback, VIncent E.; Amzajerdian, Farzin; Brewster, Paul F.; Barnes, Bruce W.; Kempton, Kevin S.; Reisse, Robert A.; Bulyshev, Alexander E.

    2013-01-01

    A second generation, compact, real-time, air-cooled 3-D imaging Flash Lidar sensor system, developed from a number of cutting-edge components from industry and NASA, is lab characterized and helicopter flight tested under the Autonomous Precision Landing and Hazard Detection and Avoidance Technology (ALHAT) project. The ALHAT project is seeking to develop a guidance, navigation, and control (GN&C) and sensing system based on lidar technology capable of enabling safe, precise crewed or robotic landings in challenging terrain on planetary bodies under any ambient lighting conditions. The Flash Lidar incorporates a 3-D imaging video camera based on Indium-Gallium-Arsenide Avalanche Photo Diode and novel micro-electronic technology for a 128 x 128 pixel array operating at a video rate of 20 Hz, a high pulse-energy 1.06 µm Neodymium-doped: Yttrium Aluminum Garnet (Nd:YAG) laser, a remote laser safety termination system, high performance transmitter and receiver optics with one and five degrees field-of-view (FOV), enhanced onboard thermal control, as well as a compact and self-contained suite of support electronics housed in a single box and built around a PC-104 architecture to enable autonomous operations. The Flash Lidar was developed and then characterized at two NASA-Langley Research Center (LaRC) outdoor laser test range facilities both statically and dynamically, integrated with other ALHAT GN&C subsystems from partner organizations, and installed onto a Bell UH-1H Iroquois "Huey" helicopter at LaRC. The integrated system was flight tested at the NASA-Kennedy Space Center (KSC) on simulated lunar approach to a custom hazard field consisting of rocks, craters, hazardous slopes, and safe-sites near the Shuttle Landing Facility runway starting at slant ranges of 750 m. In order to evaluate different methods of achieving hazard detection, the lidar, in conjunction with the ALHAT hazard detection and GN&C system, operates in both a narrow 1deg FOV raster

  19. An Evaluation of Lightning Flash Rate Parameterizations Based on Observations of Colorado Storms during DC3

    Science.gov (United States)

    Basarab, B.; Fuchs, B.; Rutledge, S. A.

    2013-12-01

    Predicting lightning activity in thunderstorms is important in order to accurately quantify the production of nitrogen oxides (NOx = NO + NO2) by lightning (LNOx). Lightning is an important global source of NOx, and since NOx is a chemical precursor to ozone, the climatological impacts of LNOx could be significant. Many cloud-resolving models rely on parameterizations to predict lightning and LNOx since the processes leading to charge separation and lightning discharge are not yet fully understood. This study evaluates predicted flash rates based on existing lightning parameterizations against flash rates observed for Colorado storms during the Deep Convective Clouds and Chemistry Experiment (DC3). Evaluating lightning parameterizations against storm observations is a useful way to possibly improve the prediction of flash rates and LNOx in models. Additionally, since convective storms that form in the eastern plains of Colorado can be different thermodynamically and electrically from storms in other regions, it is useful to test existing parameterizations against observations from these storms. We present an analysis of the dynamics, microphysics, and lightning characteristics of two case studies, severe storms that developed on 6 and 7 June 2012. This analysis includes dual-Doppler derived horizontal and vertical velocities, a hydrometeor identification based on polarimetric radar variables using the CSU-CHILL radar, and insight into the charge structure using observations from the northern Colorado Lightning Mapping Array (LMA). Flash rates were inferred from the LMA data using a flash counting algorithm. We have calculated various microphysical and dynamical parameters for these storms that have been used in empirical flash rate parameterizations. In particular, maximum vertical velocity has been used to predict flash rates in some cloud-resolving chemistry simulations. We diagnose flash rates for the 6 and 7 June storms using this parameterization and compare

  20. Evaluation of Dietary Intake of Various Vitamins in Menopausal Women with Hot Flashes

    Directory of Open Access Journals (Sweden)

    Aytekin Tokmak

    2014-12-01

    Full Text Available Aim: Menopausal hot flashes affect the majority of women. Hormone replacement therapy to reduce the severity of hot flashes is the most effective method. Today, however, due to a number of side effects of hormone therapy more women are seeking alternative treatments such as vitamin pills and herbal products. Previously, various vitamins, minerals and trace elements were studied for this purpose. In this study, our aim was to determine the level of dietary intake of various vitamins in women with hot flashes and to compare them with women who had no complaints. Material and Method: One hundred and seven consecutive women who attended the menopause clinic of our hospital for routine follow up were included in this study. All of the participants were asked about the occurrence of specific menopausal symptoms and completed 92-itm antioxidant nutrient questionnaire developed by Satia. The main parameters recorded for each woman were; age, obstetrical characteristics, body mass index, smoking status, educational level, type of menopause (surgical or natural, duration of menopause, menopausal symptoms, and number and duration of hot flashes. According to the computerized analysis of questionnaire, dietary intake of water-soluble vitamins; B complex and vitamin C, and fat-soluble vitamins; vitamin, A D, E, K were calculated. Results: Patients were divided into two groups with regard to presence of hot flashes, those with hot flashes constituted the study groups (n:75, and others without hot flashes constituted the control group (n:32. The mean age of patients was statistically significantly lower in the study group (p<0,001. The mean duration of menopause was also lower in this group (p<0,001. There were no statistically significant differences between groups in terms of obstetrical characteristics, body mass index, smoking status, educational level, type of menopause (p>0,05. Night sweats and sleep disorders were more common in women with hot flashes

  1. Simultaneous Observation of Lightning and Terrestrial Gamma-ray Flashes

    Science.gov (United States)

    Alnussirat, S.; Christian, H. J., Jr.; Fishman, G. J.; Burchfield, J. C.

    2017-12-01

    The relative timing between TGFs and lightning optical emissions is a critical parameter that may elucidate the production mechanism(s) of TGFs. In this work, we study the correlation between optical emissions detected by the Geostationary Lightning Mapper (GLM) and TGFs triggered by the Fermi-GBM. The GLM is the only instrument that detects total lightning activities (IC and CG) continuously (day and night) over a large area of the Earth, with very high efficiency and location accuracy. The unique optical emission data from the GLM will enable us to study, for the first time, the lightning activity before and after the TGF production. From this investigation, we hope to clarify the production mechanism of TGFs and the characteristics of thundercloud cells that produce them. A description of the GLM concept and operation will be presented and as well as the preliminary results of the TGF-optical emission correlation.

  2. Using commercial simulators for determining flash distillation curves for petroleum fractions

    OpenAIRE

    Eleonora Erdmann; Demetrio Humana; Samuel Franco Domínguez; Lorgio Mercado Fuentes

    2010-01-01

    This work describes a new method for estimating the equilibrium flash vaporisation (EFV) distillation curve for petro-leum fractions by using commercial simulators. A commercial simulator was used for implementing a stationary mo-del for flash distillation; this model was adjusted by using a distillation curve obtained from standard laboratory ana-lytical assays. Such curve can be one of many types (eg ASTM D86, D1160 or D2887) and involves an experimental procedure simpler than that required...

  3. Lightning Flash Initiation Locations in Four Storms over Land and Ocean

    Science.gov (United States)

    Stolzenburg, Maribeth; Karunarathna, Nadeeka; Marshall, Thomas; Karunarathne, Sumedhe

    2017-04-01

    This study examines initiation locations of intracloud (IC) and cloud-to-ground (CG) lightning in four storms that occurred near Kennedy Space Center, Florida, on one day. One unicellular and two multicellular thunderstorms occurred over land, and one multicellular storm was 30 km offshore. The storm over ocean was visible on radar 47-51 minutes before its first flash (of 17 total); first radar echoes in the storms over land were just 23, 12, and 16 minutes prior to their first flashes (of 34, 16, and 9 total). Initiation points of 66 flashes were identified using the first initial breakdown (IB) pulse location from electric field change measurements or a VHF source coincident with the first IB pulse; the other ten flashes occurred without enough data to similarly locate the initiation. Most of the IC initiations were above the echo core and above 7.5 km altitude, while nearly all the CG initiations were beside or atop the core and below 6.8 km. The off-shore storm had similar lightning duration, IC:CG ratio, and initiation altitudes as the storms over land, but it took that storm much longer to get from first radar echo to first flash and from first flash to first CG. In both regions, early and mature stage flash initiation locations were tightly clustered in small horizontal areas covering just 10-30% of the entire radar reflectivity areas in these small storms. In this presentation, we focus on comparison of temporal trends in the flash initiation altitudes among the storms and the radar reflectivity structure near the initiation locations.

  4. Animasi Sistem Reproduksi Manusia Pada Pelajaran Biologi Sekolah Menengah Pertama Dengan Adobe Flash CS 3

    OpenAIRE

    Arnisha, Ria

    2011-01-01

    This study is to develop a study application. This Biology study application about human reproduction system is developed by using software Adobe Flash CS3 Professional. Beside that, Macromedia Fireworks is also used to help in making an object. This application can be run in Flash Player or browser. The aim of this study system is to help students to learn Biology especially about Biology especially about Human Reproduction System. The contents start from the theory about man’s reproduction ...

  5. A FASTBUS flash ADC system for the Mark II vertex chamber

    International Nuclear Information System (INIS)

    Barker, L.

    1988-10-01

    This is a description of a flash ADC system built for the Mark II experiment at the Stanford Linear Accelerator Center (SLAC). This system was designed for use in the experiment's vertex chamber where signals could occur over a relatively long time, approximately 10 microseconds. This long time, coupled with fast cable amplifiers, necessitated an alternate design approach than was used with a dE/dX FASTBUS flash ADC design. 1 ref., 6 figs

  6. Ozone Formation in Laser Flash Photolysis of Oxoacids and Oxoanions of Chlorine and Bromine

    DEFF Research Database (Denmark)

    Kläning, Ulrik; Sehested, Knud; Wolff, Thomas

    1984-01-01

    The kinetics of ozone formation in the photolysis of oxygen-containing solutions of HClO, ClO–, ClO–2, ClO–3, HBrO, BrO– and BrO–3 has been studied by laser flash photolysis and conventional flash photolysis. The usual assumption, that ozone only forms in the reaction of oxygen atoms in the spin...

  7. Thermal Response of UHMWPE Materials in a Flash Flame Test Environment

    Science.gov (United States)

    2014-11-13

    COVERED (From - To) October 2012 – April 2014 4. TITLE AND SUBTITLE THERMAL RESPONSE OF UHMWPE MATERIALS IN A FLASH FLAME TEST ENVIRONMENT 5a. CONTRACT ...an FR fabric outer layer of Tencate Defender M. Prior to fabricating test garments , preliminary flash flame testing was conducted with a midscale...test setup, which guided the full-scale thermal manikin test plan. Test garments were fabricated for evaluation on the instrumented thermal test

  8. Flash pulmonary edema in patients with renal artery stenosis--the Pickering Syndrome

    DEFF Research Database (Denmark)

    Pelta, Anna; Andersen, Ulrik B; Just, Sven

    2010-01-01

    We report the prevalence of flash pulmonary edema in patients consecutively referred for balloon angioplasty of uni- or bilateral renal artery stenosis (PTRA), and describe the characteristics of this special fraction of the patients. We further report two unusual cases.......We report the prevalence of flash pulmonary edema in patients consecutively referred for balloon angioplasty of uni- or bilateral renal artery stenosis (PTRA), and describe the characteristics of this special fraction of the patients. We further report two unusual cases....

  9. A European precipitation index for extreme rain-storm and flash flood early warning

    OpenAIRE

    ALFIERI LORENZO; THIELEN DEL POZO Jutta

    2012-01-01

    Extreme rain-storms are known for triggering devastating flash floods in various regions of Europe and particularly along the Mediterranean coasts. Despite recent notable advances in weather forecasting, most operational early warning systems for extreme rainstorms and flash floods are based on rainfall estimation, rather than on forecasts. As a result, warning lead times are bounded to few hours and warnings are usually issued when the event is already taking place. This work proposes a n...

  10. Influència dels Flash heats en l’aeronavegació

    OpenAIRE

    Ramirez Valdes, Lenin

    2013-01-01

    Flash heat events have been defined recently, in 2012, as a rapid increase of temperature and drop of humidity, as a duration higher than few minutes and lower than 2 consecutive days. Flash heat events are a phenomena between the micro and macro scales, between heat burst events (few minutes affecting few kilometers, AMS) and heat wave events (more than 2 consecutive days affecting thousand of kilometers, WMO). The analysis of the great and sudden increase of temperature during some hours, a...

  11. The managerial flash sales dash: Is there advantage or disadvantage at the finish line?

    OpenAIRE

    Berezina, K.; Semrad, k.J.; Stepchenkova, S.; Cobanoglu, C.

    2016-01-01

    The central intent of this qualitative inquiry is to investigate the benefits, drawbacks, and performance measures of hotel room inventory distribution via flash sales websites. Key advantages and disadvantages of using such a distribution channel fall within the categories of inventory management, revenue management, brand marketing, customer relationships, and operational challenges. The significance of the study is in providing a comprehensive review of the flash sales phenomenon in the lo...

  12. Effects of pre-extracting a Liddell coal on its agglomeration properties during flash pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    McCarthy, D.J.; Casamento, P.A.

    1980-09-01

    The effect is studied of solvent extraction of a strongly agglomerating Liddell coal upon its subsequent tendencies to agglomerate during flash pyrolysis. A sharply defined optimum combination of extraction time and temperature is found at which the pre-extracted coal is essentially nonagglomerating. The sharpness of the optimum restricts the design and operation of an extractive pretreatment step in a flash pyrolysis process. The acidity of aromatic solvents has little effect on agglomeration of the extracted coal. (5 refs.)

  13. A FASTBUS flash ADC system for the Mark II vertex chamber

    Energy Technology Data Exchange (ETDEWEB)

    Barker, L.

    1988-10-01

    This is a description of a flash ADC system built for the Mark II experiment at the Stanford Linear Accelerator Center (SLAC). This system was designed for use in the experiment's vertex chamber where signals could occur over a relatively long time, approximately 10 microseconds. This long time, coupled with fast cable amplifiers, necessitated an alternate design approach than was used with a dE/dX FASTBUS flash ADC design. 1 ref., 6 figs.

  14. Scaling Phenomena in Desalination With Multi Stage Flash Distillation (MSF)

    International Nuclear Information System (INIS)

    Siti-Alimah

    2006-01-01

    Assessment of scaling phenomena in MSF desalination has been carried out. Scale is one of predominantly problem in multi stage flash (MSF) desalination installation. The main types of scale in MSF are carbonate calcium (CaCO 3 ), hydroxide magnesium (Mg(OH) 2 ) and sulphate calcium (CaSO 4 ). CaCO 3 and Mg(OH) 2 scales result from the thermal decomposition of bicarbonate ion, however sulphate calcium scale result from reaction of calcium ion and sulfate ion present in seawater. The rate of formation scale in seawater depends on temperature, pH, concentration of ions, supersaturated solution, nucleation and diffusion. The scales in MSF installation can occur inside heat exchanger tube, brine heater tubes, water boxes, on the face of tube sheets and demister pads. Scaling reduces effectiveness (production and heat consumption) of the process. To avoid the reductions in performance caused by scale precipitation, desalination units employ scale control. To control this scaling problem, the following methods can be used; acid, additive (scale inhibitors) and mechanical cleaning. Stoichiometric amounts of acid must be added to seawater, because addition excess of acid will increase corrosion problems. Using of scale inhibitors as polyphosphates, phosphonates, polyacrylates and poly maleates have advantage and disadvantage. (author)

  15. A neurotoxicity assessment of high flash aromatic naphtha.

    Science.gov (United States)

    Douglas, J F; McKee, R H; Cagen, S Z; Schmitt, S L; Beatty, P W; Swanson, M S; Schreiner, C A; Ulrich, C E; Cockrell, B Y

    1993-01-01

    Catalytic reforming is a refining process that converts naphthenes to aromatics by dehydrogenation to make higher octane gasoline blending components. A portion of this wide-boiling range hydrocarbon stream can be separated by distillation and used for other purposes. One such application is a mixture of predominantly 9-carbon aromatic molecules (C9 Aromatics, primarily isomers of ethyltoluene and trimethylbenzene), which is removed and used as a solvent also known as High Flash Aromatic Naphtha (HFAN). A program was initiated to assess the toxicological properties of HFAN since there may be human exposure, especially in the workplace. The current study was conducted to assess the potential for neurotoxicity in the rat. Adult male Sprague-Dawley rats of approximately 300 grams body weight, in groups of twenty, were exposed by inhalation to HFAN for 90 days at concentrations of 0, 100, 500, and 1500 ppm. During this period the animals were tested monthly for motor activity and in a functional observation battery. After three months of exposure, for 6 hours/day, 5 days/week, 10 animals/group/sex were sacrificed and selected nervous system tissue was examined histopathologically. No signs of neurotoxicity were seen in any of the evaluated parameters, nor was there evidence of pathologic changes in any of the examined tissues.

  16. Embedded system in FPGA-based LLRF controller for FLASH

    Science.gov (United States)

    Szewinski, Jaroslaw; Pucyk, Piotr; Jalmuzna, Wojciech; Fafara, Przemyslaw; Pieciukiewicz, Marcin; Romaniuk, Ryszard; Pozniak, Krzysztof T.

    2006-10-01

    FPGA devices are often used in High Energy Physics and accelerator technology experiments, where the highest technologies are needed. To make FPGA based systems more flexible, common technique is to provide SoC (System on a Chip) solution in the FPGA, which is in most cases a CPU unit. Such a combination gives possibility to balance between hardware and software implementation of particular task. SoC solution on FPGA can be very flexible, because in simplest cases no additional hardware is needed to run programs on CPU, and when system has such devices like UART, SDRAM memory, mass storage and network interface, it can handle full featured operating system such as Linux or VxWorks. Embedded process can be set up in different configurations, depending on the available resources on board, so every user can adjust system to his own needs. Embedded systems can be also used to perform partial self-reconfiguration of FPGA logic of the chip, on which the system is running. This paper will also present some results on SoC implementations in a Low Level RF system under design for the VUV Free Electron Laser, FLASH, DESY, Hamburg.

  17. Uranium tetrafluoride thermophysical properties measurements by the laser flash method

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira Neto, Ricardo Alberto; Camarano, Denise das Merces; Miranda, Odair; Grossi, Pablo Andrade; Carneiro, Luciana Capanema Silva; Silva, Egonn Hendrigo Carvalho; Migliorini, Fabricio Lima, E-mail: ranf@cdtn.br, E-mail: dmc@cdtn.br, E-mail: odairm@cdtn.br, E-mail: pabloag@cdtn.br, E-mail: lucsc@hotmail.com, E-mail: egonn@ufmg.br, E-mail: flmigliorini@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte - MG (Brazil); Aguiar, Bruno Moreira de; Borges, Wesden de Almeida; Saliba-Silva, Adonis Marcelo, E-mail: bruaguiar@ipen.br, E-mail: wesden@hotmail.com, E-mail: saliba@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    In order to increase the efficiency of the metalothermic reduction process employed by the IPEN - Instituto de Pesquisas Energeticas e Nucleares, to produce metallic uranium by means of uranium tetrafluoride reduction with magnesium, is planned utilize a mathematical model that numerically simulates the heat distribution in the charge of powders of uranium tetrafluoride and metallic magnesium duly blended. Because this program requires as input data the thermal conductivity of the uranium tetrafluoride powder and this data was not found in the literature, pellets were produced by uniaxially pressing the uranium tetrafluoride powder in pellets, employing the same technology developed at CDTN-Centro de Desenvolvimento da Tecnologia Nuclear, to produce nuclear fuel pellets. The thermophysical properties of these pellets were measured at the LMPT - Laboratorio de Medicao de Propriedades Termofisicas de Combustiveis Nucleares e Materiais of CDTN applying the laser flash method. From the measurements results, it was possible to obtain an extrapolated value of ca. 0.24 W.m{sup -1}.K{sup -1} for the thermal conductivity of the UF{sub 4} powder sample in the loose state and at room temperature. This value will be employed as input data of the mathematical model, whose results will be subject of a future publication. The UF{sub 4} powder pelletizing parameters and the thermophysical properties results (density, thermal diffusivity and thermal conductivity), are reported. (author)

  18. Flash visual evoked potentials in diurnal birds of prey.

    Science.gov (United States)

    Dondi, Maurizio; Biaggi, Fabio; Di Ianni, Francesco; Dodi, Pier Luigi; Quintavalla, Fausto

    2016-01-01

    The objective of this pilot study was to evaluate the feasibility of Flash Visual Evoked Potentials (FVEPs) testing in birds of prey in a clinical setting and to describe the protocol and the baseline data for normal vision in this species. FVEP recordings were obtained from 6 normal adult birds of prey: n. 2 Harris's Hawks (Parabuteo unicinctus), n. 1 Lanner Falcon (Falco biarmicus), n. 2 Gyrfalcons (Falco rusticolus) and n. 1 Saker Falcon (Falco cherrug). Before carrying out VEP tests, all animals underwent neurologic and ophthalmic routine examination. Waveforms were analysed to identify reproducible peaks from random variation of baseline. At least three positive and negative peaks were highlighted in all tracks with elevated repeatability. Measurements consisted of the absolute and relative latencies of these peaks (P1, N1, P2, N2, P3, and N3) and their peak-to-peak amplitudes. Both the peak latency and wave morphology achieved from normal animals were similar to those obtained previously in other animal species. This test can be easily and safely performed in a clinical setting in birds of prey and could be useful for an objective assessment of visual function.

  19. Flash visual evoked potentials in diurnal birds of prey

    Directory of Open Access Journals (Sweden)

    Maurizio Dondi

    2016-07-01

    Full Text Available The objective of this pilot study was to evaluate the feasibility of Flash Visual Evoked Potentials (FVEPs testing in birds of prey in a clinical setting and to describe the protocol and the baseline data for normal vision in this species. FVEP recordings were obtained from 6 normal adult birds of prey: n. 2 Harris’s Hawks (Parabuteo unicinctus, n. 1 Lanner Falcon (Falco biarmicus, n. 2 Gyrfalcons (Falco rusticolus and n. 1 Saker Falcon (Falco cherrug. Before carrying out VEP tests, all animals underwent neurologic and ophthalmic routine examination. Waveforms were analysed to identify reproducible peaks from random variation of baseline. At least three positive and negative peaks were highlighted in all tracks with elevated repeatability. Measurements consisted of the absolute and relative latencies of these peaks (P1, N1, P2, N2, P3, and N3 and their peak-to-peak amplitudes. Both the peak latency and wave morphology achieved from normal animals were similar to those obtained previously in other animal species. This test can be easily and safely performed in a clinical setting in birds of prey and could be useful for an objective assessment of visual function.

  20. Terrestrial Gamma Flashes at Ground Level - TETRA-II Instrumentation

    Science.gov (United States)

    Pleshinger, D. J.; Adams, C.; Al-Nussirat, S.; Bai, S.; Banadaki, Y.; Bitzer, P. M.; Cherry, M. L.; Hoffmann, J.; Khosravi, E.; Legault, M.; Orang, M.; Rodriguez, R.; Smith, D.; Trepanier, J. C.; Sunda-Meya, A.; Zimmer, N.

    2017-12-01

    The TGF and Energetic Thunderstorm Rooftop Array (TETRA-II) consists of an array of BGO scintillators to detect bursts of gamma rays from thunderstorms. TETRA-II will have approximately an order of magnitude greater sensitivity for individual flashes than TETRA-I, an original array of NaI scintillators at Louisiana State University that detected 37 millisecond-scale bursts of gamma rays from 2010-2015. The BGO scintillators increase the energy range of particles detected to 10 MeV and are placed in 20 detectors boxes, each with 1180 cm3 of BGO, at 4 separate locations: the campus of Louisiana State University in Baton Rouge, Louisiana; the campus of the University of Puerto Rico at Utuado, Puerto Rico; the Centro Nacional de Metrologia de Panama (CENAMEP) in Panama City, Panama; and the Severe Weather Institute and Radar & Lightning Laboratories in Huntsville, Alabama. The data are read out with 12 microsecond resolution by National Instruments PCIe 6351 high speed data acquisition cards, with timestamps determined from a 20 MHz clock and a GPS board recording a pulse per second. Details of the array and its instrumentation, along with an overview of initial results, will be presented.