WorldWideScience

Sample records for nado kenkyu kaihatsu

  1. Research and development of utilization technology of solar thermal system for industrial and other use. Development of passive solar system (research and development of advanced glazing); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Passive solar system no kaihatsu (chokozai nado no kenkyu kaihatsu (advanced grazing no kenkyu kaihatsu))

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for advanced glazing in which solar energy is efficiently utilized. The peripheral techniques are surveyed for evaluation of characteristics of large-size dimming glass, optimization of film compositions and scaling up. The dimming device, made on a trial basis, attains a target controllable rage of at least 50% for visible light transmittance. The suitable components include WO3 as the electrochromic material producing color under a reducing atmosphere, NiO as the counter electrode producing color under an oxidative atmosphere, and hydrated SbOx as the proton-conducting electrolyte. The test results indicate possibility of the dimming glass stably operable while being irradiated with a quantity of sun ray of around 10 years. The study on scaling up the dimmer glass develops, on a trial basis, a process for producing large-size glass and evaluates its characteristics, where the film parameters are investigated. It also investigates the peripheral techniques for assembling the devices for the large-size glass, and develops useful techniques, such as those for sealants and improved sealing methods. 1 fig., 1 tab.

  2. Report on research results of the development of high efficient boilers in fiscal 1996. Research development of high efficient industrial furnaces, etc; Koseino boiler no kaihatsu ni kansuru kenkyu seika hokokusho. Koseino kogyoro nado ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Out of the developments of high efficient boilers which have been continued since fiscal 1993, the paper reported the result of the development conducted in fiscal 1996. The oxygen combustion (the oxygen enrichment combustion including 100% oxygen combustion) decreases the amount of flue gas and reduces heat loss of the flue gas, and is also effective as NOx reduction measures. The experiment was conducted using testing furnace. The boiler efficiency rapidly increased with the increasing concentration of oxygen enrichment. In the pure oxygen combustion, the overall boiler efficiency of a 106% level (low heating value standard) is expected. Since the boiler wet flue gas is decreased, the NOx emission is reduced. The boiler can raise the combustion temperature with no fear of NOx and can be reduced in size. CO2 decreases in proportion to the energy saving effect. The development of a condensation flue gas heat exchanger is aimed at recovering heat down to the low temperature. Prediction of heat transfer in the steam condensation region becomes possible, and the size reduction can be expected. Dew point corrosion resistant materials were also selected. As to the high speed combustion control, a simple type using micro-processor was developed. Obtained were high speed, compactness, electric power saving, and high controllability. 14 refs., 306 figs., 88 tabs.

  3. Development of the technology for commercialization of the industrial solar system. ; Development of the advanced heat process system (research of low-cost elemental devices, etc. (examination of elemental devices, etc. )). Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. ; Advancedter dot heat process gata system no kaihatsu (tei cost yoso kiki nado no chosa kenkyu yoso kiki nado ni kansuru chosa)

    Energy Technology Data Exchange (ETDEWEB)

    1990-10-01

    To organize the technological schemes for lowering the costs of elemental devices, etc. in industrial solar systems, the factors that prevent cost reduction were examined and evaluated, and technologies that would lower costs were chosen. The factors that prevent the cost reduction of industrial solar systems were divided into economical factors (solar radiation, structure, strength, etc.) and efficiency factors (energy density, system, control, etc.) and investigation and evaluations were carried out for each type. The keywords for cost reduction were defined as a. new materials, new elemental devices, technology, b. unification, organization, integration, c. combined utilization, multi-aspect utilization, multi-function, d. practicality, comfortability, usability, e. mono-function, simplification, usage specific, f. policy, system, viewpoint, etc. While dividing the factors which would lower costs of elemental devices, etc. into elemental technology, devices, materials, unification with architectual structures, multi-purpose utilization, etc., the factors were also divided according to function: heatcollecting parts, heat transporting parts, heat storage parts, and systems. Performance evaluation according to the keywords and information about costs, etc. helped choose the problems.

  4. Verification survey of geothermal exploration technology, etc. Report on the result of the developmental research on the development of the fracture type reservoir exploration method; Chinetsu tansa gijutsu nado kensho chosa. Danretsugata choryuso tansaho kaihatsu kenkyu kaihatsu seika sokatsu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of grasping fracture groups forming geothermal reservoirs with accuracy, the development of the fracture type reservoir exploration method has advanced the technical development of exploration methods of seismic wave use, electromagnetic induction use, and micro-earthquake use. This paper summarized main results of the development and problems to be solved in the future. In the development of the seismic wave use exploration method, the high accuracy reflection method using seismic wave, VSP and seismic tomography were adopted to the geothermal field, and technology effective for the exploration of fracture type reservoirs was developed. In the development of the electromagnetic induction use exploration method, the array CSMT method which can measure multiple stations along the traverse line at the same time was developed with the aim of grasping effectively and accurately fracture groups forming geothermal reservoirs as changes of resistivity in the shallow-deep underground. In the fracture group forming geothermal reservoirs, micro-earthquakes are generated by movement of thermal water and pressure variations. In the development of the micro-earthquake use exploration method, developed was the micro-earthquake data processing and analysis system (MEPAS). 179 refs., 117 figs., 28 tabs.

  5. Fiscal 1998 research report. Survey on R and D, and application technology of biotechnology; 1998 nendo chosa hokokusho. Bio technology no kenkyu kaihatsu, sangyoka gijutsu nado ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Survey was made mainly on use of biotechnology as resource saving and energy saving processes. Biotechnology is in wide use in a pharmaceutical field, while its application is on the increase in agriculture, food, chemistry, energy and environment fields. The USA is ahead of Japan and Europe. In the USA, there are more than 1000 ventures, and R and D of biotechnology, in particular, gene analysis and manipulation techniques are in progress together with acquisition of patents. In biomass energy, production of ethanol from corn, and development of biodiesel are in progress in the USA and Europe, respectively. Use of biomass should be promoted because of its global environment compatibility and sustainable productivity. In the future bio-market, genome analysis and its application are most important, however, Japan is behind in such technology in the world. The Joint approach by industry, university and government is necessary from the viewpoint of a future marketability and international competitiveness. Promotion of a public acceptance and nurture of creative talents are also important. (NEDO)

  6. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the technology to fix and effectively use carbon dioxide using bacteria and microalgae (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of contributing to the solution to the global environmental problem, a technology is developed in which by searching for/breeding/developing bacteria, etc. which conduct photosynthesis highly effectively, CO2 is fixed and recycled. The fiscal 1996 R and D is outlined as the utilization of bacteria, microalgae, etc. Obtained were microalgae exceeding the conventional strains in CO2 fixation ability, and bacteria/microalgae excellent in production of polysaccharides, hydrocarbon, lipid, biological active substances, etc. The fundamental study was continued of CO2 integrated enzyme function/reaction system as molecular biological breeding. In the cell fusion, a set-up of conditions for green algae was started. For the confirmation of performance of high dense/quantity culture technology using solar light, further improvement of performance and systematization, 200L scale testing equipment was manufactured. It is a collective reactor and enabled study of ventilation/agitation and control of light strength. A reactor analysis model was constructed. Also including the conversion into useful substances, energy/material balance was systematically studied. Collection of technical literature and information exchanges were made in Japan and overseas. 276 refs., 475 figs., 156 tabs.

  7. FY 1997 R/D project of industrial and scientific technologies contracted with NEDO. Report on technology development of utilization of biological resources such as bioconsortia (development of analytical techniques of bioconsortia); 1997 nendo sangyo gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu (fukugo seibutsukei kaiseki gijutsu no kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Bioconsortia are microbial composites composing of more than two kinds of microorganisms with special functions. To utilize their advanced functions, some techniques have been developed for analyzing their functions and interactions, and for identification, separation and incubation of the constituent microbial groups. In FY 1997, an investigation was made on technology trends, domestic researchers, and research topics related to bioconsortia. To manage and promote the progress of research at the National Institute of Bioscience and Human-Technology where the centralized management of this project is conducted, meetings are held once a month to examine the progress at the institute, in which reports are made and discussions are held on how each research item is progressing. In addition, meetings of the committee to promote research are held every other month to consider and examine measures required for promoting the research. Re-entrustment of research has been made on two subjects, i.e., `Studies on biological significance of symbiotic microorganisms` by Prof. Ishikawa of the University of Tokyo, and `Study on the relationship between the biosynthesis of useful terpenic materials of plant origin and the differentiation of plant tissues, and their effective production by plant cell cultures` by Prof. Inoue of Gifu Pharmaceutical University. 27 refs., 13 figs., 1 tab.

  8. Fiscal 1998 research report on the development trends of natural gas conversion technologies into liquefied fuel in Russia; 1998 nendo Roshia ni okeru tennen gas no ekitai nenryoka gijutsu no kaihatsu doko nado ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Russia having natural gas resources largest in the world is actively promoting the basic research on liquefaction technology of natural gas such as Fischer-Tropsch (FT) synthetic catalyst, and its research potential is extremely high. This 3-year research project surveys the R and D trends of catalyst technology for liquefaction of natural gas, and fabricates the prototype FT synthetic catalyst based on the idea of Russian researchers to evaluate its feasibility experimentally. This report summarizes the following to clarify the research background: (1) The technology system for liquefaction of natural gas, and its future R and D trend, (2) The R and D trends of liquefaction technology of natural gas in the world, (3) The R and D trends of liquefaction technology of natural gas in Russia, (4) The research system of catalyses in Russia, (5) The activities of Russian catalysis research institutes, (6) The fuel liquefaction technologies of Russian major research institutes, and (7) The proposals from Russian research institutes. (NEDO)

  9. Achievement report for fiscal 1998 on the research and development of environmental technologies such as recycling. 2. Technology for reducing automobile running noise; 1998 nendo recycle nado kankyo gijutsu kenkyu kaihatsu seika hokokusho. 2. Jidosha sokoon teigen gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Experiments and studies are conducted for reducing along-the-road automobile running noise. In the study of noise generation due to tire vibration, it is found that the main mechanism of noise generation on a well-drained pavement is the vibration of tires. A calculation model is built for estimating the vibration of the tire belt from the characteristics of the road surface and the tire. In the study of air column resonance in the tread groove, a method is studied of measuring fluctuations in the sound pressure in the tread groove. Measurement is conducted, and it is found that the generally accepted explanation, in which air column resonance is attributed to tread vibration generated upon collision of the tire with the road surface, needs further study for substantiation. In a model experiment, it is found that air column resonance hardly occurs on a well-drained pavement. In the study of hydroplaning, it is found that, even when the total volume of the tread longitudinal grooves is the same, the hydroplaning performance tends to improve when the groove arrangement and crown curvature are proper. (NEDO)

  10. Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Surgery support system for brain tumors and other conditions; 1999 nendo iro fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Noshuyo nado shujutsu shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    A function of coordinated operation of two manipulators by a single operating lever and a function of detecting interference between manipulators are incorporated into a micro-manipulator system, and the new functions are found to work. A function of detecting, and displaying information on, any operation beyond the effective range is installed, and this improves on operability. A video microscope system is evaluated by experiments with phantoms and clinical applications, and it is found that it is serviceable. An adjustable arm stand is fabricated for the stereoscopic viewer, and its serviceability is verified. A variable convergence stereoscopic display for surgical operators is manufactured experimentally for practical application at clinical operations. Measurement error is evaluated of the positioning system installed on the second trial microscope. As for the micro-manipulator system, its operability and forceps operations are tested and evaluated on an experimentally built system. A display system is developed for endoscope images and micro-manipulator information. The surgical vision system is integrated with the micro-manipulator system, and the result is highly evaluated by surgical operators. (NEDO)

  11. Fiscal 1996 global environmental industry technology research related project. Report on the results of the consignment project of research and development of technology for reducing carbon dioxide emissions; 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu kanren jigyo. Nisanka tanso nado haishutsu teigen gijutsu kenkyu kaihatsu itaku gyomu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of reducing emissions of carbon dioxide, freon, etc., a research project was carried out of `Research and development of technology for reducing carbon dioxide emissions` which consists of 8 projects. The paper reported the results of the projects. The projects are: (1) Development of waste water treatment of submerged combustion system, (2) Development of thermoelectric generating devices, (3) Development of high performance heat insulation materials, (4) Development of methanol reformer for transportable fuel cell, (5) Development of large pressure reducing valves, (6) Development of large-scale turbo heat pump for district heating and cooling plants, (7) Development of heat pumps for transportation equipment, and (8) Development of thermoelectric cooling devices. In (1), the waste water treatment test was conducted and reached the target. In (2), the thermoelectric device using powder sintering element obtained performance twice the performance level of the existing device. In (3), (4), (5) and (6), the target was all reached. In (7), the results well agreed in a comparison between structural analysis and experiment. The cooling unit by the SPS sintering method using Bi-Te system sintered material element obtained the cooling efficiency almost the same as that by the freon compressor method. 8 refs., 161 figs., 63 tabs.

  12. Fiscal 1998 R and D project on global environmental industrial technology. Research result report on DNA analysis and information processing technology for photosynthesis microorganisms (Development of CO{sub 2} fixation and effective use technology by using bacteria and algae); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kogosei biseibutsu nado DNA kaiseki joho shori gijutsu no kenkyu (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on DNA analysis and information processing technology for photosynthesis microorganisms. On the study on DNA analysis technology by triple-strand formation method, as the comparison study result of a READ method, stable triple- strand formation method and hairpin method, a READ method showed the highest triple-strand formation efficiency for target DNA. On the study on accurate separation technology of specific genes, establishment of protocols was promoted for solid-phase probe technology, subtract technology and leveling technology. On the study on DNA microarray analysis technology by high-efficiency hybridization method, the analysis technology of genes by hybridization method using DNA chips is under investigation. In addition, the high- efficiency analysis technology of specific DNA segments by using an affinity sensor, and the high-accuracy cloning technology for DNA with altered primary structure were also studied. (NEDO)

  13. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO (book on the handling / gas lift system). Report on the results of the R and D of the overall base technology of ocean resources (R and D of submarine oil drilling technology, etc.); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shine Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kaiyo shigen sogo kiban gijutsu no kenkyu kaihatsu (kaitei sekiyu kussaku gijutsu nado kenkyu kaihatsu) seika hokokusho (handling / gas lift system hen)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper conducted a R and D on the handling of drilling equipment in drilling/collecting of submarine oil and the gas lift of artificial oil extraction technology. As to each equipment of a barge style handling system, conducted were assembly/adjustment/trial run on land and pipe handling experiments on sea. In the experiment, confirmed were pipe transfer function, lifting function, fitting function, grasping function, etc. In the ocean experiment, studied were pipe bending stress, Karman vortex control effects, etc. Relating to the gas lift system, experiments were made on confirmation of fabrication/performance of air compressor. Moreover, a technique of air transportation to the blowing inlet of the gas lift pipe was established by developing an air blowing system and fabricating a long-distance flexible pipe. Concerning the gas/liquid/solid three-phase separator, a cyclone separator was developed, and improvement in lifting efficiency was confirmed. Helped by these, the problems of the gas lift system were almost solved, and a possibility of the commercial-base production system was obtained. 2 refs., 182 figs., 47 tabs.

  14. FY 2000 Industrial science and technology research and development themes - cooperative project with academic circles. Report on the results of research and development of technologies for creating new bioaffinity molecules using submicron beads (Development of technologies for rational use of energy); 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the research and development for creating new bioaffinity molecules using submicron beads. The program for development of technology for analyzing chemical-biomolecule complexes using submicron affinity beads has developed a detachable linker which allows the complex, composed of ligand on the affinity latex particle surfaces and receptor bound thereto, to be detached directly from the particles, and also developed the prototype of magnetite-containing polymer particles with a diameter of submicron order, which facilitate recovery of the affinity latex. The program for development of technology to create chemical substances with new functions has successfully constructed the focused library composed of 400 compounds based on the split and pool method for FR225659 as a glucose modulator, chosen as the target material. It also has established the method of synthesizing opioid alkaloid as the target compound on the solid phase, and synthesized 39 opioid compounds with condensed indol rings, having diverse of several substituents. (NEDO)

  15. FY 1998 annual report on the compilation of database of experts for development of welfare equipment. Surveys for collecting information of institutes supporting, e.g., welfare equipment research and development; 1998 nendo fukushi yogu no kaihatsu ni kakawaru senmonteki chiken wo yushita jinzai database no kochiku chosa hokokusho. Fukushi yogu kenkyu kaihatsu nado shien kikan joho seibi chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to promote supply of high-quality, inexpensive welfare equipment, the data about public testing and research institutes throughout Japan are collected for their organizations, research themes, expertized areas, relations with welfare equipment, future activity guidelines and the like, and expert employees, so that enterprises can have adequate advises from them, when they plan to start researches on and development of related equipment. Information was obtained by means of questionnaires returned back from a total of 127 institutes related to industrial testing and researches, and 61 institutes, e.g., rehabilitation centers, deeply related to welfare equipment. This reports compiles information on 48 institutes which are conducting researches or the like on welfare equipment. The compiled lists of the local institutes supporting welfare equipment research and development activities describe, e.g., their total expenses, numbers of technical experts, conditions of windows responsible for welfare equipment or the like, percentages of expenses related to welfare equipment on total expenses, percentages of numbers of technical experts responsible for welfare equipment on total numbers of technical experts, and major research themes on welfare equipment. (NEDO)

  16. Fiscal 1996 R and D under a consignment from NEDO of environmental technology such as recycling. 2. Automobile running sound reduction technology (for public); 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (recycle nado kankyo gijutsu kenkyu kaihatsu). 2. Jidosha sokoon teigen gijutsu (seika hokokusho (kokaiyo ))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Tire/road noise and the running performance were studied. Test were conducted using drum testing machine. If kinds and frequencies of tires are different, noise radiation characteristics are also different, and the degree of the difference are more remarkable in tires of passenger cars than those of large sized cars. There is also observed special frequency noise caused by natural vibration of tires. Noise increases when there are translots in tires, it decreases when having the translots had angles. In hydroplaning, tires which had translots installed inclinedly generate less noise. The sound absorbing rate of the pavement using dense particle asphalt-concrete mixture is low, below 0.2, but the drainage type pavement (three kinds) showed high sound absorbing rates (0.4-0.7) in each kind. Noise reduction by the drainage type pavement was seen also in the engine type noise. Further, prediction of noise propagation was possible to a certain extent using the Allard model. As to lock braking force coefficients on the wet road, there are no definite differences between roads in terms of passenger cars, but the coefficients are higher in the drainage type pavement than that using the dense particle asphalt-concrete mixture in terms of large sized cars. On the dry road, those in the use of dense particle asphalt-concrete mixture are the highest. 3 refs., 96 figs., 11 tabs.

  17. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of environmental technology such as recycling (for public). 1; 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Recycle nado kankyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo). 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This R and D is aimed at promoting reduction in environmental loads by waste, etc. and reutilization of waste, etc., and at developing environmental technology such as recycling contributing to reducing road traffic noise. Studies were made on operation conditions of material separation in the bottle state and flake state, color separation, washing process, etc. Moreover, tests were conducted on comparisons of performance of shredders with different functions. Running tests of 100,000 times were conducted to confirm effectiveness of durability of the paved road with used papers. Measurement of hardness of the resin using the sol-gel method and coating experiment using organic dye were carried out to study the membrane effect speed and flaw resistance of coating of coloring bottles. Gasification of shredder dust and separation of nonferrous metal and glass were conducted to get the basic data. As to FRP bath tubs, the ratio of glass fiber and plastics was studied and western tiles were trially manufactured. Further studies were made of removal conditions of noncombustibles, chlorine and sulfur content, and reaction conditions of alkali additives including kind, quantity and addition method. 166 figs., 132 tabs.

  18. FY 1998 annual report on the compilation of database of experts for development of welfare equipment. Surveys for collecting information of institutes supporting, e.g., welfare equipment research and development; 1998 nendo fukushi yogu no kaihatsu ni kakawaru senmonteki chiken wo yushita jinzai database no kochiku chosa hokokusho. Fukushi yogu kenkyu kaihatsu nado shien kikan joho seibi chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to promote supply of high-quality, inexpensive welfare equipment, the data about public testing and research institutes throughout Japan are collected for their organizations, research themes, expertized areas, relations with welfare equipment, future activity guidelines and the like, and expert employees, so that enterprises can have adequate advises from them, when they plan to start researches on and development of related equipment. Information was obtained by means of questionnaires returned back from a total of 127 institutes related to industrial testing and researches, and 61 institutes, e.g., rehabilitation centers, deeply related to welfare equipment. This reports compiles information on 48 institutes which are conducting researches or the like on welfare equipment. The compiled lists of the local institutes supporting welfare equipment research and development activities describe, e.g., their total expenses, numbers of technical experts, conditions of windows responsible for welfare equipment or the like, percentages of expenses related to welfare equipment on total expenses, percentages of numbers of technical experts responsible for welfare equipment on total numbers of technical experts, and major research themes on welfare equipment. (NEDO)

  19. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of environmental technology such as recycling (for public). 1; 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Recycle nado kankyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo). 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This R and D is aimed at promoting reduction in environmental loads by waste, etc. and reutilization of waste, etc., and at developing environmental technology such as recycling contributing to reducing road traffic noise. Studies were made on operation conditions of material separation in the bottle state and flake state, color separation, washing process, etc. Moreover, tests were conducted on comparisons of performance of shredders with different functions. Running tests of 100,000 times were conducted to confirm effectiveness of durability of the paved road with used papers. Measurement of hardness of the resin using the sol-gel method and coating experiment using organic dye were carried out to study the membrane effect speed and flaw resistance of coating of coloring bottles. Gasification of shredder dust and separation of nonferrous metal and glass were conducted to get the basic data. As to FRP bath tubs, the ratio of glass fiber and plastics was studied and western tiles were trially manufactured. Further studies were made of removal conditions of noncombustibles, chlorine and sulfur content, and reaction conditions of alkali additives including kind, quantity and addition method. 166 figs., 132 tabs.

  20. FY 1998 annual summary report on manipulation of atomic and molecular extremes. Development of technologies for high-efficiency analysis/manipulation of DNA and the like; 1998 nendo genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho. DNA nado kokoritsu kaiseki sosa gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The objectives are set to establish the techniques for observation/manipulation of atoms and molecules, as the common basic techniques for various industrial areas, e.g., new materials, electronics, biotechnology and chemical. Development of atomic field and scanning tunneling microscopes working under extreme conditions has been pursued, in order to manipulate complex systems, such as living body. For identification of molecular species, laser-excited fluorescence is combined with scanning mechanical probing to further refine the single molecule detection/identification techniques, and the objectives are set to develop a new method for evaluating molecules in a living body using a scanning probe microscope, and also to develop a novel scanning probe microscope for molecules in a living body. The other efforts were directed to R and D of the techniques for observing structures of organic molecules and the like through the measurements of adsorption process of organic molecules and clusters on semiconductor substrates and their surface reactions, and precision measurements of vibrational conditions of adsorbed molecular species reacting in the solid-liquid interfaces by high-sensitivity Raman spectroscopy to elucidate the catalysis mechanisms at the molecular level. (NEDO)

  1. Research and development of utilization technology of solar thermal energy system for industrial and other use. Research and development of solar system (investigation of popular type snow melting systems); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Solar system no chosa kenkyu (fukyugata yusetsu system no kenkyu chosa)

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for investigation for popular type snow melting systems using solar energy. Two types of technologies are proposed to utilize solar energy for snow melting in winter and create comfortable environments. One is combined (active plus passive) type, which transfers solar heat it collects by the whole wall surfaces to an attic to heat it totally, and makes the whole roof as a radiator to melt snow. However, heat radiated from the roof is insufficient to melt all snow on the roof, allowing it to remain to an extent that it works as an insulator. The other is active type, which transfers heat it collects by the collector to the heat storage tank, from which heat is extracted in winter for various purposes, including snow melting. Such a system must store heat for an extended period, for which a highly insulating heat storage tank is proposed to balance capacity of heat storage between seasons and building size.

  2. Research and development of utilization technology of solar thermal system for industrial and other use. Research and development of key technology (energy conversion on technology using chemical reactions); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Yoso gijutsu no kenkyu (kagaku energy henkan gijutsu no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for energy conversion technology using chemical reactions by the aid of solar energy. The demonstration runs were conducted by a bench-scale unit, which was operated stably for 100h, to produce promising results. The catalyst exhibits stable performance, without showing a sign of deactivation. It is found that the heat pump system works well, without being interfered with accumulated by-products. A heat of approximately 2,100kcal/h is recovered. It is confirmed that steam of 150{degree}C and 200{degree}C is generated from hot water of 80{degree}C and 95{degree}C, respectively. The bench-scale runs show a thermal efficiency of around 10%, which is lower than the target level. However, the runs with hydrogen-occluding alloy attain a process thermal efficiency of 30%. The system in which solar collector and chemical heat pump units are combined is evaluated with respect to its economic efficiency and operability for its eventual commercialization. 6 figs., 2 tabs.

  3. Report on achievements in fiscal 1999 on the project for research and development of an intellectual base creating and utilizing technology. Research and development of standard substances related to internal secretion disturbing chemical substances (researches on preservation stability and the valuing methods related to pure substance standard substances, mixed standard substances and composition type standard substances); 1999 nendo chiteki kiban sosei riyo gijutsu kenkyu kaihatsu seika hokokusho. Naibunpi kakuran kagaku busshitsu kanren hyojun busshitsu no kenkyu kaihatsu (junbusshitsu hyojun, kongo hyojun oyobi soseigata hyojun busshitsu ni kakawaru hozon anteisei, nezuke hoho nado ni tsuite no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the achievements in fiscal 1999 on researching and developing standard substances related to internal secretion disturbing chemical substances. Environmental contamination due to environmental hormones has a large number of scientifically unclear points. These points are related to the basic conditions for the existence of living organisms, whereas serious impacts transcending the generations are feared. In addition, the environmental hormones have been observed in water quality, water bottom quality, and living environments for aquatic animals. Standardization in technologies to measure them, and arrangement of standard substances are demanded strongly. Based on these circumstances, evaluations were given on the following matters: determination of purity of the reference substances with regard to the standard solutions of di-2-ethyl hexyl phthalate, di-n-butyl phthalate, and diethyl phthalate among the standard substances required for the measurement, establishment of methods for measuring impurities and preparing the standard solutions, establishment of the methods to measure concentrations of the standard solutions, and the preservation stability of the standard solutions. As a result, standard solutions with accurate concentrations and excellent stability were developed. In addition, development was performed on the composition type standard substance for which a certified value was given to PCB in soil. (NEDO)

  4. FY 2000 Industrial science and technology research and development themes - cooperative project with academic circles. Report on the results of research and development for creating new bioaffinity molecules using submicron beads (Research and development for creating new bioaffinity molecules using submicron beads); 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the research and development of technologies for creating new bioaffinity molecules using submicron beads, including those for organic receptor analysis and refining. The program for development and research of fixation technology develops immobilizing reaction and latex particle having cleavable linker, and synthesize small molecules for the identification of target receptors. The program for development of organic receptor refining technology directly refines cisplatin-telomere binding proteins from crude nuclear extracts of HeLa, and analyzes them; analyzes the functions of Ref-1 purified from Jurkat cell nuclear extracts as the binding protein for drug E3330 which specifically controls the transcriptive factor NF-{kappa}B; and studies LK6A having an MLR inhibiting activity, promoters for production of Alendronate, Taxol and leptin, D91-6092 as a promising anti-cancer agent, and antirheumatic, antiallergic, antitumor agents and FK506 as immunosuppressant agent. (NEDO)

  5. FY 2000 report on the R and D of the particulate utilization type creation technology of biological connective substances. Survey of the technical trend overseas; 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Kaigai gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper summarized the reports on the results of Japanese engineers' participating in the related scientific meetings held overseas as a survey report on the trend of the overseas technology. The scientific meetings they participated in were: 1) Impact of Genomics on Medicine and Pharmacogenomics Europe (Amsterdam; May 15-26, 2000), 2) Drug Discovery Technology 2000 (Boston; August 10-20, 2000), 3) Biotechnology 2000 (Berlin; September 3-12, 2000), 4) PacificChem 2000 (Hawaii; December 14-21, 2000), 5) 4th Winter Conference on Medicinal and Bioorganic Chemistry (Seattle; January 27 - February 4, 2001). Impact of Genomics on Medicine was composed of the following five fields: microarrays, proteomics, functional genomics and target validation, genetic variation technology, and applications of SNP analysis (joint session). Pharmacogenomics Europe was composed of the following four fields: applications of SNP analysis (joint session), SNP assays, targets and compounds, and clinical applications. (NEDO)

  6. Report on achievements in fiscal 1999 on research and development of the technology to create biological bonding substances utilizing particulates under the industrial and scientific technology research and development theme [university collaborated type]. Research and development of the technology to create biological bonding substances utilizing particulates; 1999 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the achievements in fiscal 1999 on development of the technology to create biological bonding substances utilizing particulates. In fixing ligands onto particulates, it is necessary that various compounds be fixed with their receptor bonding specificity maintained. Therefore, carboxylic acid, thiol and bromoacetyl groups were introduced into the particulates. Capping them by using methoxyacetyl was found capable of suppressing non-specific adsorption. Opioid compounds were synthesized for their fixation onto particulates for selection and separation. Carrying particulate bonding precursors in latex beads was realized. Synthesis will continue on opiod compounds in which amide groups are introduced into different positions to provide the particulate carrying ligands with diversity. Biological receptors for different compounds were obtained and refined by using compound fixing particulates. Refinement and acquisition were possible on FK506 bonded protein in a short time from cell extraction liquid by using the fixing particulates for the FK506 bonded protein. The paper also describes analysis of bonded domains, and position-specific fixation of the biological receptors. (NEDO)

  7. Fiscal 1998 industrial science and technology R and D theme (University coordination type). Research report on R and D of technologies for creating new bioaffinity molecules using submicron beads; 1998 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 result on the entrusted research 'R and D of technologies for creating new bioaffinity molecules using submicron beads' based on 'Industrial science and technology R and D system.' As for development of technologies for analyzing chemical- biomolecule complexes using submicron affinity beads, for molecule design of DNA to be connected with cisplatin, telomere DNA was employed as a target DNA of cisplatin, and cisplatin-modified DNA (Pt-DNA) was synthesized. Reaction condition for Pt-DNA connected beads was established, and affinity beads with Pt-DNA were prepared. As for development of organic receptor refining technology, proteins bound to cisplatin-DNA were preliminarily analyzed, showing that the Pt-DNA is a proper target chemical substance. It is the first evidence that certain proteins recognize cisplatin-damaged telomere DNA. In addition, introduction of the equipment for developing analysis technology of binding domains, development of technology to create organic receptors with new functions, and general research on the titled technologies were carried out. (NEDO)

  8. FY 1999 report on the results of the R and D of the global environmental industry technology. R and D of the CO2 fixation/effective use technology using bacteria/algae; 1999 nendo saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of developing the technology to fix CO2 and recycle it as resource in higher efficiency than that in photosynthesis in the nature world, study of bacteria, etc. was made in terms of the search, breeding, and artificial realization of the growth environment, etc. The FY 1999 results were summed up. As to high efficiency photosynthetic bacteria/microalgae, conditions for sampling/breeding/optimum culture of bacteria were established and made database. From conditions for the optimum CO2 fixation by photosynthetic bacteria, oxygen injury prevention culture method, continuous culture experiment, etc., it was found out that the carbyne cycle was a main route of the carbon fixation also in photosynthetic bacteria. As to the cell fusion, established were the technology of electric fusion of interspecific fusion strains and the technology of evaluation of growth characteristics. Also studied was a method to transfect genes into Chlorella sp. which fixes CO2. Concerning the light collecting reactor of 200L scale, a high concentration culture experiment was carried out using Chlorella sp. UK001 as the strain tested, and the engineering data on the behavior in culture tank, multiplication speed, etc. were collected. (NEDO)

  9. Industrial technology research and development project for global environment in fiscal 1998. Report on achievements in research and development of technologies for fixation and effective utilization of carbon dioxide by utilizing bacteria and algae; 1998 nendo saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Microorganisms are cultivated industrially in a great quantity to fix CO2 at efficiency higher than that of photosynthesis in natural world to develop technologies to re-utilize them as resources. This paper describes achievements in fiscal 1998. Existing strain samples of photosynthesized bacteria and micro-algae were screened to continue discussions on optimal culture conditions, and evaluation on properties. Genes that provide Chlorella with antibiotic resistance were introduced to have performed evaluation on function manifestation, and acquired enzymatic genes of unsaturated {omega} 3. Using green algae as the object, reduction in the processing time has resulted in acquiring a large number of fused cell colonies. Discussions were given on conditions to breed photosynthesized bacteria and fix CO2. Structural analyses were performed on CA protein as an enzyme related to take CO2 into living organisms, and on genes. Developments were carried out on a photosynthesizing bio-reactor and useful substance producing technologies on a continual basis. A 200-liter scale light collection type bio-reactor improved the fixing capacity by 30% in Chlorellas by changing the culture medium. The direct light receiving panel type bio-reactor can utilize even scattered light, with its fixing capacity per installation area exceeding the target. Fundamental data were acquired with Chlorellas on utilizing feeds, fertilizers and building materials. (NEDO)

  10. Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Surgery support system for brain tumors and other conditions (Rationalization for energy profit); 1999 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Noshuyo nado shujutsu shien system (energy shiyo gorika)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    In the second phase of experimental micro-manipulator fabrication, insertion parts equipped with three manipulators and operation input units are built and evaluated. The system comprises three input units and a console with a built-in controller etc., and the console is checked for shape and operability. A high resolution and high brightness stereoscopic viewer is developed for clinical use by surgical operators, and is examined for practicality. The positioning system for the intraoperative vision instrument are improved relative to its attachment method, accuracy, and sterilization tolerance. The result is evaluated, and then further improvement is made. Some functions are added to the surgical planning software program. Software programs are constructed for the real-time control and operation of the viewing system. For the micro-manipulator system to serve as a total system, the forceps are extended, tips are developed for the suction device and incision device, and their functions as members of the system are evaluated. (NEDO)

  11. Research and development of utilization technology of solar thermal system for industrial and other use. Research and development of solar system (research for solar/energy-conservation technology retrofitted to existing buildings); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Solar system no chosa kenkyu (solar toshi muke gijutsu ni kansuru chosa)

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for solar/energy-conversion technologies retrofitted to existing buildings. The estimated effects and economic viability of retrofitting technologies show that they bring very high energy-saving effects when applied to heating and hot water supply, which consume a large portion of energy, but relatively low energy-saving effects when applied to cooling, solar walls, glazed balconies and transparent insulators. The study on applicability of these technologies in Japan indicates that the technologies which can recover cost within an average life time are those applied to windows, solar collector systems for hot water supply and heating, and transparent insulators. Although these technologies are low in applicability to cooling viewed from the angle of cost recovery, retrofitted radiation type cooling systems improve not only cooling and energy-saving effects but also comfortableness.

  12. Research and development of photovoltaic power system. Research on low temperature deposition of polycrystalline thin films; Taiyoko hatsuden system no kenkyu kaihatsu. Teion seimaku gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Sato, K. [Tokyo Univ. of Agriculture and Technology, Tokyo (Japan). Faculty of Technology

    1994-12-01

    This paper reports the result obtained during fiscal 1994 on research on a technology of low temperature deposition of polycrystalline thin films for solar cells. This research used ITO coated glass substrates, on which CdS was accumulated to a thickness of about 100 nm by using the CBD process, and over this deposition a CuInSe2 film was formed at 300{degree}C by using the ion cluster beam (ICB) process. The manufactured solar cells with a glass/ITO/CdS/CuInSe2/Au structure had an efficiency of 2%. In manufacturing a CuGaSe2 thin film by using the ICB process, effects of acceleration voltage relative to cluster beams and ionization current were investigated. It was found that the film morphology, the result of analysis by using X-ray diffraction, and the electric conductivity are sensitive to the ionization current. From these findings, an optimum film forming condition was derived. A CuGaSe2 thin film was manufactured by using the ICB process over a Cds thin film deposited by using the CDB process. Both of the surface morphology and X-ray diffraction patterns of the film did not show a large change, indicating a possibility of manufacturing cells with a reverse structure. Effects of heat treatment on CuInSe2 monocrystals were evaluated by using ESR and FTIR. 6 figs., 1 tab.

  13. Conhecimento de performance com base no Teste do Desempenho Motor do Nado Crawl, na aprendizagem do nado crawl

    Directory of Open Access Journals (Sweden)

    Juliana Izabel Katzer

    2015-09-01

    Full Text Available ResumoO objetivo deste estudo foi verificar os efeitos do conhecimento de performance (CP, com base no teste do desempenho motor do nado crawl (TDMND (Corazza et al., 2006, na aprendizagem do nado crawl. Participaram do estudo 41 adultos. Enquanto um grupo recebeu CP após boas tentativas, o outro recebeu CP após as más tentativas. O TDMNC, composto por 29 itens, foi usado para a elaboração das informações de CP, assim como para a constatação dos níveis de aprendizagem. Para ambos os grupos, independentemente do CP fornecido, foi detectada diferença entre o pré e o pós-teste, o que indica sucesso no processo de aprendizagem. No entanto, na comparação entre os pós-testes, não foram observadas diferenças significativas entre os grupos. A complexidade do teste e a dificuldade dos aprendizes em discriminar entre boas e más tentativas de prática são discutidos.

  14. Relações entre desempenho em 200m nado crawl e variáveis cinéticas do teste de nado estacionário

    Directory of Open Access Journals (Sweden)

    Flávio Antônio de Souza Castro

    2010-05-01

    Full Text Available O objetivo deste estudo é relacionar o desempenho (DES em 200m nado crawl e variáveis cinéticas do teste de nado estacionário (TNE: impulso total (IMP, taxa de variação de impulso (TIMP e pico de força (PF. De 12 nadadores competitivos (idade média de 18,3 ± 2,9 anos foram obtidos IMP, TIMP, PF e DES em 200m nado crawl (este transformado em unidades pontuais. Com o desempenho (711,8 ± 29,1 pontos, o IMP (2663,6 ± 150,6 N·s apresentou correlação (r = 0,876; p < 0,001, enquanto a TIMP (-24,45 ± 14,38 N e o PF (217,48 ± 29,10 N não apresentaram correlações (r = -0,553; p = 0,062 e r = -0,19; p= 0,714; respectivamente. O impulso total obtido no TNE pode ser utilizado como parâmetro de avaliação da capacidade de força aplicada ao longo do tempo e como preditor do desempenho na prova de 200m nado livre.

  15. Study on development of adsorbent of acetaldehyde; Acetaldehyde yo kyuchakuzai no kaihatsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Noda, T. [Nippon Steel Corp., Tokyo (Japan); Suzuki, M. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science

    1997-07-10

    The adsorption of acetaldehyde by porous ceramics impregnated with hydrazinium aluminum sulfate (HAS) is studied. Silicagel, activated alumina, activated clay, and activated carbon are compared, and it is found that silicagel and activated clay are suitable as a substrate for HAS impregnated adsorbent. The adsorption mechanism of acetaldehyde by the adsorbent is believed to be one in which acetaldehyde reacts with hydrazinium and yields acetaldazine. The adsorption capacity of the adsorbent at low acetaldehyde concentration of 0.1 ppm was as large as 1.36 mol/kg. This adsorption capacity at 0.1 ppm acetaldehyde concentration is remarkably larger than that of conventional activated carbon. Hydrazinium decomposes easily in the air because it is a strong reducing agent and reacts with oxygen or carbon dioxide. But hydrazinium impregnated on porous ceramics with HAS becomes more stable and maintains reactivity with acetaldehyde for longer than six months. An adsorbent made of porous ceramics impregnated with HAS is useful as a deodorant for acetaldehyde. 8 refs., 6 figs., 6 tabs.

  16. FY 2000 report on the results of the regional consortium R and D project - Regional new technology creation R and D. First year report. R and D of medicine toxicity assessment use hepatocyte chip; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium kenkyu kaihatsu / chiiki shingijutsu soshutsu kenkyu kaihatsu. Dokubutsu dokusei hyokayo kansaibo chip no kenkyu kaihatsu (dai 1 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Judging that in the beginning of the toxicity test, the necessary information/knowledge are acquired not by using animal itself but only by using liver system (hepatocyte), the development was proceeded with of the hepatocyte chip substituting for the animal experiment. Studies were made in the following five fields: 1) design of functional matrices; 2) development of the pharmacological assessment technology; 3) development of cell sensing technology/biosensor fabrication; 4) study of a possibility and the limit of cell patterning technology; 5) survey of the market scale. In 1), studies were made of the establishment of the 3D culture method for hepatocyte and the construction of hepatocyte models for medicine assessment using pieces of liver. In the latter, by including capsule using the sugar introduced with galactose residue which is special sugar of hepatocyte to alginic acid and chitosan which are natural polymer and also hepatocyte isolated into sponge, aggregate was formed, and its use as a medicine assessment use liver model was tried to be made. (NEDO)

  17. R and D of remote reading system. Remote reading system no kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Nakano, H.; Hamada, T.; Nakamura, O. (The Kansai Electric Power Co. Inc., Osaka (Japan)); Imai, Y.; Akiyama, K.

    1992-03-25

    As measures for the spots difficult in metering within a framework to integrally automate the power distribution, a remote reading system was prototypically tested and evaluated in reliability on the actual field. The system methodically selected the signal {prime}s line injection, high frequency wave signal and voltage detection, while the signal frequency, transmission rate and highest transmission output were set at approx. 3.5KHz, 7.5bps and 50dBm, respectively from the test result. The demonstration test on reliability of the system locatively selected a vicinity of high voltage consumer, high harmonic wave-generating consumer, transforming station, etc. The total ratio of success in reception was comparatively high in Kuzuno and Yamazaki areas, but low in Kamojyo and Ichinomiya areas, The badness in reception was caused by the fluctuation in noise and strongness in damping which was influenced by the condenser in the high voltage consumer. The locative relation between the parent and child stations of system, and high voltage consumer being classified into four patters, an application table of remote reading system was prepared by simulation. 14 figs., 6 tabs.

  18. Research and development project plans for FY 1995; 1995 nendo kenkyu kaihatsu jigyo keikaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The present research and development project plans for FY 1995 administrated by NEDO consist of research and development of new energy, and research and development of industrial technology. Are illustrated further enhancement of new energy introduction promotion measures, new stage of international projects, promotion of new energy and new energy technology development, further enhancement of industrial and scientific technology research and development, integrated measures against global and urban environment problems, and budget of NEDO projects in FY 1995. The research and development of new energy includes coal conversion technology, solar energy technology, geothermal energy technology, energy conversion and storage technology, hydrogen, alcohol and biomass energy technology, geothermal energy resources, coal resources development, new energy promotion department activities, NEDO information center activities, and so on. On the other hand, the research and development of industrial technology includes research and development of industrial technology, and global environment technology. The research and development of industrial technology consists of superconductivity, new materials, biotechnology, electronics, information and communications, machinery and aerospace, natural resources, humanity, life and society, and various leading researches.

  19. Jet engine R and D and I; Watashi to jet engine kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Murashima, K. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    1998-06-10

    My efforts towards at the development of aeroengines since the end of the war are described. The J3-7 engine propelled the T1 trainer plane, and was installed as booster aboard the P2J antisubmarine patrol aircraft. It was the first jet engine that Japan produced after the end of the war, and had been in use until quite recently. I took part in the construction of a prototype of the JR100 series designed to serve as VTOL (vertical take-off and landing) aircraft lift engines, and in the test thereof. As the shift from turbojet to turbofan proceeded, I participated in the development of the FJR710 engine under the guidance of National Aerospace Laboratory, and the product was installed aboard an experimental STOL (short take-off and landing) aircraft Asuka. I next joined a Defense Agency initiative for a reheat turbofan to replace the J3 aboard trainer plane, and the result was the low bypass ratio/high output F3 engine. In 1989, Ministry of International Trade and Industry decided for a large-scale project of developing an engine for a next-generation supersonic transport, and the HYPR (Super/Hypersonic Transport Propulsion System) project was started. The project was participated in by manufacturers from overseas, which were GE, P and W, RR, and SNECMA. The foreign corporations worked on an equal footing with the Japanese parties, and collaboration between the participants was smooth, with each party endeavoring in the field they were good at. The project will be concluded as scheduled in fiscal 1998. (NEDO)

  20. Research and development on multicore OPGW; Tashingata OPGW no kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, T. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1999-10-10

    Research and development were conducted on the multicore OPGW which is the nucleus of the information and communication network of The Kansai Electric Power Co., Inc. Such OPGW(optical ground wire) as 48 core type is mainly used at present, while the multicore type is designed to cope with further advanced information system. The following were taken into consideration in the development other than the mechanical characteristics and the unit price of the core wires. As for heat resistant characteristics, since the tolerance conditions were different between 154kV or below and 275kV or above, they were developed separately. As an optical fiber diameter increased, the gap needed to be secured. As a measure to deal with it, stainless steel was employed for the storing pipe in place of aluminum, putting together the batch structure of an optical cable. The multicore type cables thus developed were 84 and 60 core type for the 154kV or below, and 60 and 42 core type for the 275kV or above. Their performance test was conducted. The lateral pressure resistance characteristics were free from transmission loss fluctuation in the desk top calculation and in the simulation test of actual cable installation, which proved no problem. The salt spray test revealed no problem either in the corrosion resisting performance. The springing is possible by the present stringing method. (NEDO)

  1. Development of ceramic based nanocomposites with high performance; Koseino ceramic kei nanocomposite no kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Niihara, K.; Sekino, T.; Choa, Y. [Osaka University, Osaka (Japan). The Institute and Industrial Research; Nakahira, A.

    1997-10-15

    Various ceramic-based nanocomposite materials with nano-scale ceramic or metal grains diffused thereinto are introduced. Oxide-based ceramics/ceramics nanocomposite materials such as those based on Al2O3/SiC and on natural mullite/SiC have been successfully produced using the ordinary sintering technology. As intragrain nanocomposite materials of the non-oxide base, those based on Si3N4/granular TiC and on SiC with stacking faults have been developed, and it is disclosed that fracture toughness improves two times in a stacking-fault composite. By the application of the method for manufacturing ceramics/metal-based materials, finer texture control can be exercised than by the application of the ceramics/ceramics-based nanocomposite manufacturing technology. The nanocomposite materials obtained so far include those based on Al2O3/W and on Al2O3/Mo. In the future, various ceramic materials will be manufactured to satisfy versatile requests for different performance, and it is believed that a ceramic material so tough as to withstand the maximum temperature will be realized by combining microcomposite materials and nanocomposite materials. 33 refs., 15 figs., 3 tabs.

  2. Overview of FY1997 human media technology R and D; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu seido Shin energy Sangyo Gijutsu sogo Kaihatsu Kiko itaku jigyo. Human media no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports a summary of results in fiscal 1997 of research and development of human media technology. Fiscal 1997 launched design and trial fabrication of the following items: interface to improve efficiency and safety of plant operators, accommodation of multimedia contents to aid Kansei design, city development design aiding technologies using contents retrieval and presentation technologies and virtual reality, and empirical evaluation technologies for safety, comfort and convenience. Specific study assignments were extracted on a virtual media technology, a Kansei media technology and a knowledge media technology being three elementary technologies for human media to make clear the research and development approaches to be taken in the coming fiscal years. In addition, a human media technology committee, a research and development working group, and an investigation working group were established. Also launched were investigations on research trends in the human media technology, and investigative researches on contacts of information needs in industries with human media. 59 refs., 114 figs., 24 tabs.

  3. Development of hydrothermal power generation plant. Development of binary cycle power generation plant (development of 10 MW-class plant); 1995 nendo nessui riyo hatsuden plant nado kaihatsu binary cycle hatsuden plant no kaihatsu. 10MW kyu plant no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    A 10 MW-class binary cycle power generation plant has been developed using a down hole pump (DHP) which exchanges the hydrothermal energy with secondary medium in the heat exchanger. For constructing the plant at Kuju-machi, Oita Prefecture, site preparation works, foundation of cooling tower, reconstruction of roads, and survey on environmental influences were conducted. To investigate installation and removal methods of DHP, a geothermal water pump-up system, current status of the binary cycle power generating system in the USA was surveyed. In this survey, a trailer mounting handling machine was inspected. Based on the survey results, a simple assembled, easy-installation type handling equipment was designed. In addition, the replacement work for motor connector joint of DHP and the strength of coil end were improved. Construction and method allowing reuse of the motor cable were considered by improving the cable and cable end portion. The air tight soundness of incoloy corrugate sheath was confirmed. Finally, a reproduction system for waste oil of DHP bearing oil was investigated. 106 figs., 52 tabs.

  4. Coordenação do nado borboleta: estudo piloto sobre os efeitos da velocidade de nado e das ações inspiratórias

    Directory of Open Access Journals (Sweden)

    Ricardo Peterson Silveira

    2012-06-01

    Full Text Available A proposta deste estudo piloto foi verificar os efeitos da velocidade de nado e dos ciclos inspiratórios sobre os parâmetros coordenativos do nado borboleta. Participaram quatro nadadores de nível regional, com desempenho médio de 69 ± 3,6% do recorde mundial na prova de 100 m borboleta em piscina de 25 m. Em resposta ao incremento da velocidade de nado, entre os principais resultados, destaca-se: redução da duração absoluta dos ciclos (de 2,01 ± 0,43 s para 1,07 ± 0,09 s, entre velocidade relativa aos 200 m e velocidade máxima em 25 m, com inspiração frontal e similar comportamento para ciclos não inspiratórios; marcado aumento na duração das fases propulsivas da braçada, expressas em % da duração média de quatro ciclos de braçada (fase B de 14,6 ± 3,2% para 22,8 ± 4,7% e fase C de 12,9 ± 1,0 para 19,1 ± 0,9% com inspiração frontal e similar comportamento para ciclos não inspiratórios, bem como maior sincronismo entre as ações da braçada e da pernada.

  5. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). The R and D aims at establishment of observation/manipulation technology of atoms and molecules as common basic technology in various industrial fields such as new material, electronics, bio-technology and chemistry. The R and D thus aims at establishment of observation/manipulation of solid surfaces and DNA organic molecules, formation of fine structures of atomic surface arrangement, and calculation/ simulation for predicting a reaction theorem of atom and molecule surfaces. In fiscal 1997, research was made on improvement and development of computer simulation environment, and description of an excited state of electrons by Green function. Establishment of a construction method and computation code is under investigation for pseudo- potential dependent on excitation energy. Survey was made on research trends of the atom technology by visiting overseas academic societies and institutions. International Symposium on Atom Technology was also held in Tokyo in Nov. 1997

  6. FY 1997 R/D project of industrial and scientific technologies contracted with NEDO. Report on R/D of organosilicon polymers; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Keisokei kobunshi zairyo no kenkyu kaihatsu (keisokei kobunshi zairyo no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The purpose of this study is to establish fundamental techniques for molecular design, synthesis, material processing and evaluation of organosilicon polymers having excellent electro- and photo-functions, and advanced heat-proof, fire-proof and mechanical properties. This R/D includes (1) R/D of electrical conducting materials by organosilicon polymers, (2) R/D of novel organosilicon polymers applicable to direct lithography, (3) R/D of new silicon-based polymer materials with electro-luminous function, and (4) R/D of silicon-based polymers for new photoconductive materials. In (1), synthesis method of regular polymers with a 3-D structure was developed. Non-volatile dopants were developed, and structures of polymer-dopant composites could be controlled. In (2), precise control of conductivity was examined. Material processing and evaluation techniques were also examined through stabilization of polysilane thin films, optimization of pattern forming conditions, and precision of patterns. In (3), new silicon-based polymers have been synthesized. In (4), two kinds of polymers have been synthesized for development of materials with high photo-carrier generation efficiency and high mobility. 72 refs., 71 figs., 22 tabs.

  7. FY 1996 R/D project of industrial and scientific technologies contracted with NEDO. Report on R/D of organosilicon polymers; 1996 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Keisokei kobunshi zairyo no kenkyu kaihatsu (Keisokei kobunshi zairyo no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    Organosilicon polymers are highly innovative materials having high performance and novel functions, and they can be widely applied. The purpose of this study is to establish fundamental techniques for molecular design, synthesis, material processing and evaluation of organosilicon polymers having excellent electro- and photo-functions, and advanced heat-proof, fire-proof and mechanical properties. This R/D includes (1) R/D of electrical conducting materials by organosilicon polymers, (2) R/D of novel organosilicon polymers applicable to direct lithography, (3) R/D of new silicon-based polymer materials with electro-luminous function, and (4) R/D of silicon-based polymers for new photoconductive materials. In (1), synthesis of highly conjugated polymers is investigated. In (2), novel organosilicon polymeric materials have been developed, which would be applicable to direct lithography of electronic circuits, and which could contribute to simplification of the circuit formation process. In (3), the research aims at development of new silicon-based polymer materials with luminescent function which can be applied to the large size electro-luminescent display devices. In (4), new materials with visible light absorption have been synthesized through the molecular design and synthesis. The photo-carrier generation was observed. 107 refs., 86 figs., 23 tabs.

  8. Research and development of a color-related global database of sensory values concerning color cognition, color emotions, etc. and the multimedia system to feedback it into products and living environment. FY 1995 data book 6 Analysis results of experiments; 1995 nendo shikisai ninchi ya shikisai kanjo nado, shikisai ni taisuru kannochi no kokusaiteki database no kochiku to, sore wo seihin oyobi seikatsu kankyo no shikisai sekkei ni han'eisaseru multimedia system no kenkyu kaihatsu. Shiryoshu dai 6 kan shikisai hyoka jikken no bunseki kekka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    This data is the results of the analysis on the color evaluation experiment. In the analysis of an experiment on 'single color image evaluation,' described were the average evaluation value by sex, profile of each color, position of each color in image space, etc. In the 2-color coloring evaluation, the experiment on 2-color coloring matching degree evaluation, analysis of factors determining the matching degree, comparison between the results of the coloring matching feeling experiment and the results of the survey of the world's youth, results of the analysis of difference in country, etc. In the analysis of the color simulation experiment, the experiment on 3-color coloring matching degree evaluation, relations between the area ratio and the matching degree of coloring stimulation, etc. In the experiment on evaluation of the matching degree of interior/exterior/fashion stimulation, 28 types of combination of colors of lipstick/suit/blouse, combination of suit/sweater/wall face of architecture, combination of sofa/floor/carpet, combination of wall/bed, evaluation of the matching degree of street colors (street stimulation), etc. (NEDO)

  9. Research and development of a color-related global database of sensory values concerning color cognition, color emotions, etc. and the multimedia system to feedback it into products and living environment. FY 1995 data book 4 'Color statistics' tables; 1995 nendo shikisai ninchi ya shikisai kanjo nado, shikisai ni taisuru kannochi no kokusaiteki database no kochiku to, sore wo seihin oyobi seikatsu kankyo no shikisai sekkei ni han'eisaseru multimedia system no kenkyu kaihatsu. Shiryoshu dai 4 kan 'shikisai tokei' shukeishu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    Surveys made on 'color statistics' in countries/regions of the world were collected and arranged. In the survey of 'exterior,' investigators were sent to 35 cities and took pictures there. Looking at the pictures, they recorded in the table the names of the colors selected from color samples. In the survey of 'interior' and 'fashion,' the pictures of the magazines bought in Japan were sorted in each city, and the color in each item of the table was selected from the 1995 sample book of coating use standard colors of Japan Paint Manufacturers Association. In the survey of streets in major cities of the world/exterior, colors of the following were described: road surface, roof, outer wall, window frame, door, verandah, bench, public telephone, trash can, bus, train, car, fence, chimney, etc. In the survey of interior, colors of the following: gate, passage, living room, dining room, bedroom, kitchen, bathroom, nursery, study, etc. In the survey of fashion, colors of the casual, sporty, formal and business clothes of teens-thirties, etc. (NEDO)

  10. FY 1997 research and development of fusion domains. Part 2. Studies on bionic design; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 1. Bionic design no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Studies were conducted on actuator function in bio materials, cells, structures, and living organisms, and on structuring a biological molecule machine. In the study on soft biological structures, biological compatibility of artificial glass bodies using ultra-polymeric PVA was found very high, raising expectation on feasibility of their practical use. Three-dimensional structure of glass bodies was made clear for the first time in the world. As a result of separating and purifying cells from a liver for the first time in the world, it was indicated that excellent proliferation performance and differentiation into cells are shown. With regard to hydroxyapatite in hard biological structure such as bones and teeth, single crystals were synthesized, and growth rate on the surface C was measured successfully. For molecular motors, studies are being performed on functions of twin-head structure in biological protein enzyme. In molecule structuring, studies were conducted on preparation of a hydrogenase LB membrane as an electric-hydrogen energy conversion element, and structuring of protein molecular structure using gene recombination. 69 refs., 37 figs., 8 tabs.

  11. FY 1997 research and development of fusion domains. Part 1. Studies on cluster science; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 1. Cluster Science no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Studies were made on clusters which are thought to play important roles in status changes in substances (coagulation, crystallization and phase segregation) and chemical reactions (combustion, aqueous solution reaction and catalytic reaction). In the study of clusters by using infrared spectra, a method was developed to detect by using mass analyzer the cluster ion amount produced by dual resonance between resonantly enhanced multiphoton ionization (REMPI) and infrared lights. Fabrication of a Terahertz spectrometer was planned to enable high-resolution and high-accuracy observation on molecular clusters. Clusters consisting of silver atoms and ammonia molecules were successfully observed. A method was developed to investigate size dependence of cluster reactivity by using a Fourier converted ion cyclotron resonant mass analyzer. In addition, studies were conducted on clusters in liquids and aqueous solutions, clusters frozen in surface and matrix, and clusters stabilized in micro-space. 96 refs., 34 figs., 2 tabs.

  12. Research and development of molten carbonate fuel cell power generation system. ; Supporting studies. Yoyu tansan'engata nenryo denchi hatsuden system no kenkyu kaihatsu. ; Support kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    This paper presents a report on supporting studies as part of researches on a molten carbonate fuel cell power generation system, as a NEDO fiscal 1988-1992 report. With respect to developing the material technologies, iron-based and nickel-based cathodes have been fabricated on a trial basis to compare and discuss their polarization characteristics; optimal conditions for hydrogen reduction when Ni-Al anodes are manufactured have been elucidated; Ni-Cr alloy thin separators have been fabricated on a trial basis; and prototype ceramics materials (cathodes and electrolyte plates) have been manufactured and evaluated. These activities have provided a large number of useful findings. In addition, developments have been progressed in respective areas of coal gas handling technologies, capacity increasing technologies, and high-performance gas separation and purification technologies. In the coal gas handling technologies, for example, influences of HCl and NH3 on desulfurization using TiO2-ZnO have been investigated to have elucidated that NH3 has no influence whatsoever. The capacity increasing technology development has discussed a system configuration of coal gas MCFC power generation of 500-MW class, and device sizes. 3 figs.

  13. Research and development of molten carbonate fuel cell power generation system. ; Supporting studies. Yoyu tansan'engata nenryo denchi hatsuden system no kenkyu kaihatsu. ; Support kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    With an objective to develop a molten carbonate fuel cell (MCFC) power generation system, this paper discusses such supporting technologies as material and coal gas handling technologies, capacity increasing technologies, and CO2 separating technologies. Performance of generating a voltage of 0.825V has been obtained from a single cell using iron-based alloy powder materials when anode porosity is 70% and current density is 150 mA/cm[sup 2]. A separator material with aluminum electrolytically plated, and nickel dispersed showed superb corrosion resistance. Crack generation has been reduced in a ZrO2 fiber reinforced electrolyte plate. High-performance corrosion resistant electrolyte plates have been fabricated in the ceramic system by using the electrode microstructure controlling technology and alumina-based fiber reinforcement. Desulfurizing catalyst, TiO2-ZnO, for coal gas dry refining has been studied. Zinc ferrite, a regenerative desulfurizing agent, has been improved for the inorganic salt type gas refining. Discussions have been given on increasing capacity of a 500-MW class coal gasification MCFC power generation system. A CO2 separation testing equipment of a PSA system has been opened for inspection, but no anomalies such as corrosion, damages, and sludge generation have been discovered. 4 figs.

  14. Research and development of photovoltaic power system. Research on surface passivation for high-efficiency silicon solar cells; Taiyoko hatsuden system no kenkyu kaihatsu. Hyomen passivation no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Saito, T. [Tokyo Univ. of Agriculture and Technology, Tokyo (Japan). Faculty of Technology

    1994-12-01

    This paper reports the result obtained during fiscal 1994 on research on surface passivation of high-efficiency silicon solar cells. In research on carrier recombination on SiO2/doped silicon interface, measurements were carried out on minority carrier life with respect to p-type silicon substrates with which phosphorus with high and low concentrations are diffused uniformly on the surface and non-uniformly on the back and then oxidized. The measurements were performed for the purpose of evaluating the carrier recombination at p-n junctions. Effective life time of oxidized test samples increased longer than that of prior to the oxidization as a result of effect of surface passivation contributing remarkably. In research on reduction in carrier recombination on SiO2/Si interface by using H radical annealing, experiments were conducted by using a method that uses more active H-atoms. As a result, it was revealed that the reduction effect is recognized at as low temperature as 200{degree}C, and photo-bias effect is also noticeable. Other research activities included analytic research on minority carrier recombination on micro crystalline silicon/crystalline silicon interface, and experimental research on evaluation of minority carrier life of poly-crystalline silicon wafers. 6 figs.

  15. Research and development for solar thermal energy system. Research on advanced solar component; Taiyonetsu energy system no kenkyu kaihatsu. Kiki no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, T.; Doi, T.; Takashima, T.; Ando, Y.; Masuda, T.; Fujii, T. [Electrotechnical Laboratory, Tsukuba (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for research on advanced solar components as part of research and development of solar thermal energy. The catalyst for liquid-film reactions is prepared, and the flask tests are conducted as the preliminary experiments for development of the reactor in which 2-propanol is fallen in liquid film over the catalyst dispersed to accelerate its decomposition. It is decomposable when fallen in liquid film even in the presence of 35% of acetone. The catalyst of ruthenium carried by activated coal is used to produce 2-propanol under an exothermic condition from acetone and hydrogen. Diisopropyl ether and 4-methyl-2-pentanone are produced as by-products, when the reactor tube is kept at 140 to 200{degree}C at the external wall, diminishing as temperature is increased. There is a temperature differential of 20 to 30{degree}C in the reactor tube between the center axis and external wall. 3 figs.

  16. Research and development of system to utilize photovoltaic energy. Survey on the specific purpose modules; Taiyoko hatsuden riyo system no kenkyu kaihatsu. Taiyoto module ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the survey results on the specific purpose modules for photovoltaic power generation in fiscal 1994. (1) On the feasibility survey on new application fields, it was clarified that photovoltaic power generation is applicable to extensive areas such as farmland, road, railway and public facility as latent demand sites. (2) On the optimum modules for various specific purposes, the structure, production method, cost estimation and issues of various modules were studied for desert, wasteland, coast, ocean, river, embankment, railway, road, mobile facility and arcade. (3) On the survey on new materials and material development, various conventional materials and materials promising for required performance were surveyed for every application. (4) On the survey on technology trends, the survey members participated in the first international photovoltaic energy conversion conference and the photovoltaic power generation workshop, while the members held the 1st-5th specific purpose module subcommittees. 1 tab.

  17. Research and development of photovoltaic power system. Optimization of bandgap of chalcopyrite semiconductors; Taiyoko hatsuden system no kenkyu kaihatsu. Kinseitaihaba no saitekika no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Konagai, M. [Tokyo Institute of Technology, Tokyo (Japan). Faculty of Engineering

    1994-12-01

    This paper reports the result obtained during fiscal 1994 on research on research on optimization of bandgap in thin film compound solar cells. In research on Cu(InGa)Se2 thin film solar cells by using a gas phase selenide making process, discussions were given on optimizing the following three processes: a process to raise temperature of a precursor film formed at a substrate temperature of about 150{degree}C, a selenide making process to perform annealing at about 500{degree}C, and a temperature reducing process. Good characteristics were obtained when selenium amount in the precursor is about 50%. In a bandgap control viewpoint, it was found that the conversion efficiency decreases rapidly when Ga composition is higher than 50%. A conversion efficiency of 14.9% was obtained to date at the Ga/(In+Ga) ratio of 0.4. In research on Cu(InGa)Se2 thin film solar cells by using a simultaneous deposition method, a conversion efficiency of 13.5% was obtained at a bandgap width of about 1.3 eV during research on manufacturing ZnO/CdS/Cu(InGa)Se2 thin film solar cells by using the simultaneous deposition method. Research has been carried out on manufacturing Cu(InGa)Se2 thin film solar cells using ZnSe interface layers. 8 figs.

  18. Research and development of photovoltaic power system. Interface studies of amorphous silicon; Taiyoko hatsuden system no kenkyu kaihatsu. Amorphous silicon kaimen no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Konagai, M. [Tokyo Institute of Technology, Tokyo (Japan). Faculty of Engineering

    1994-12-01

    This paper reports the result obtained during fiscal 1994 on research on interface of amorphous silicon for solar cells. In research on amorphous solar cells using ZnO for transparent electrically conductive films, considerations were given on a growth mechanism of a ZnO film using the MOCVD process. It was made clear that the ZnO film grows with Zn(OH)2 working as a film forming species. It was also shown that the larger the ZnO particle size is, the more the solar cell efficiency is improved. Furthermore, theoretical elucidation was made on effects of rear face of an interface on cell characteristics, and experimental discussions were given subsequently. In research on solar cells using hydrogen diluted `i` layers, delta-doped solar cells were fabricated based on basic data obtained in the previous fiscal year, and the hydrogen dilution effect was evaluated from the cell characteristics. When the hydrogen dilution ratio is increased from zero to one, the conversion efficiency has improved from 12.2% to 12.6%. In addition, experiments and discussions were given on solar cells fabricated by using SiH2Cl2. 9 figs.

  19. 1998 Annual Study Report. Research and development of power storage by high-temperature superconducting flywheels (research and development of permanent magnet); 1998 nendo seika hokokusho. Koon chodendo flywheel denryoku chozo kenkyu kaihatsu (eikyu jishaku no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The permanent magnets have been investigated and developed, for eventual commercialization of a 10 MWh power storage system by high-temperature superconducting flywheel. The permanent magnet rotors have been already developed in the previous years using a praseodymium-based magnet (Pr magnet) and neodymium-based sintered magnet (Nd sintered magnet), and the target rotational speed of 30,000 rpm has been attained. For development of the magnetic circuit to produce a stronger and smoother magnetic field, magnetic flux density of the Nd sintered magnet is measured. It shows a lower magnetic flux irregularity than the Pd magnet, but there is still room for further improvement. For development of large-size permanent magnet fabrication techniques, it is confirmed that the large-size Nd sintered magnet can be easily magnetized by partial magnetizing, as is the case with the Pr magnet. In this year, the irregular magnetic flux is three-dimensionally simulated, based on the results obtained in the previous years, to find that the simulated results are in good agreement with the observed ones. The measures to solve the problems are also investigated. It is also confirmed that the large-size ring magnet can be easily magnetized by partial magnetization. (NEDO)

  20. Research and development of evaluation system for photovoltaic power generation system. Research and survey on test and evaluation method for BOS component devices; Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu. Shuhen gijutsu hyoka system no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on R and D of the evaluation method for BOS component devices in fiscal 1994. (1) On the study on requirements of BOS component devices for practical use, the study results on storage battery, inverter, protective device for system interconnection, and effective use means for storage battery were summarized. On the future device technology, it was clarified that the following value added technologies are promising: simple design of inverter circuit, cost reduction by common specification and mass production, and stabilization of voltage and compensation of momentary peak load by combining inverter with small-capacity storage batteries. (2) On the study on the performance test method for BOS component devices, basic characteristic (capacity, efficiency) test, PSOC charge/discharge cycle test, and accelerated life cycle test were performed for 4 kinds of new storage batteries developed by NEDO. The whole characteristic test results satisfied specifications, and long-term cycle test is in promotion for all new storage batteries. 3 figs., 4 tabs.

  1. Research and development of evaluation system for photovoltaic power generation system. Research and development of evaluation systems for photovoltaic cells and modules; Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu. Taiyo denchi hyoka system no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on R and D of the evaluation system for solar cells in fiscal 1994. (1) On development of the performance evaluation method for solar cells, data collection, analysis and measurement of atmospheric conditions necessary for outdoor measurement were carried out to improve the measurement accuracy of laminated solar cells. The validity of measurement methods was verified by comparing experimental results with outdoor measurement ones to improve the indoor measurement accuracy by multiple light source solar simulator. Generated energy in solar cell module level was also studied in field. (2) On development of the reliability evaluation method for solar cells, deterioration data were collected and analyzed by long-term exposure test. As a result, it was clarified that Pmax values are directly affected by seasonal change in air mass, and deterioration of solar cells is hardly found after exposure test for one year, showing a stable state. The characteristic recovery experiment of amorphous solar cell modules was carried out, and the accelerated deterioration test method of thin film cell modules was also studied. 2 figs.

  2. Research and development of peripheral technology for photovoltaic power systems. Research and development of photovoltaic modules integrated with construction materials (detachable plane panel); Shuhen gijutsu no kenkyu kaihatsu. Kenzai ittaigata module no kenkyu kaihatsu (chakudatsushiki heiban panel)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on R and D of photovoltaic modules integrated with construction materials in fiscal 1994. (1) On development of technology for module structures, specifications of the horizontal muntin system module were newly determined in addition to the improved muntin system module, and the prototype pseudo-module integrated with construction material was prepared. The comparison results of the basic performance of both system modules clarified superior waterproofing and module temperature uniformity of the horizontal muntin system. Based on this specifications, integration technology of modules with back metal plates was studied. Formation of the integrated module close to final specifications was ascertained to be possible by use of passivation equipment to irregular form. (2) On development of construction and installation methods of modules, improvement of the waterproofing and workability of both system modules was studied. (3) On the study on practical use of modules, their design and ventilation/cooling structure were studied. 38 figs., 13 tabs.

  3. Research and development of peripheral technology for photovoltaic power systems. Study of nickel-hydride storage battery for photovoltaic generation systems; Shuhen gijutsu no kenkyu kaihatsu. Taiyoko hatsuden`yo suiso denchi no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on R and D of nickel-hydride storage battery for photovoltaic generation systems in fiscal 1994. (1) On the study on low-cost electrode materials, the physical properties and electrode characteristics were studied of the prototype hydrogen absorbing alloys prepared by substituting Cu or Ni for Co in Mm(Ni-Co-Mn-Al)5 (Mm: mixture of rare earth elements). The result clarified that it is difficult to reduce Co content in the alloy to 0.4 atom or less. Simple heat treatment and milling processes in production of hydrogen absorbing alloy electrodes were achieved by adopting an improved metal mold and gas atomization method. Characteristics and cycle life of the Ni positive electrode prepared by applying active paste material of Ni(OH)2 were studied, however, the result showed only lives of nearly 300 cycles. (2) On the study on electrode structure for high-performance (long-life) battery, the 3-D porous metal electrode support was evaluated, and various battery configurations were studied. 11 figs., 1 tab.

  4. Research and development of evaluation system for photovoltaic power generation system. Survey on research and development of solar cell evaluation system; Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu. Taiyo denchi hyoka system no kenkyu kaihatsu chosa

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the survey results on R and D of solar cell evaluation systems in fiscal 1994. The performance/reliability evaluation subcommittee continuously analyzed technical issues and discussed solution measures from the last fiscal year. On development of performance evaluation methods, improvement of measurement accuracy for laminated solar cells is the study issue to be solved. Although laminated solar cells are measured by multiple light source solar simulator, difficult spectrum compensation causes measurement errors. Collection and analysis of data for determining atmospheric conditions, and outdoor measurement experiment under the atmospheric conditions for reference solar light were carried out. The study on incident angle characteristics of laminated solar cells clarified that the deviation from COS characteristics is 1.0% or less at an incident angle of 30{degree}. The study on generated energy in solar cell module level in field clarified that generated energy and generation efficiency are proportional to intensity of solar radiation. 1 tab.

  5. Research and development of peripheral technology for photovoltaic power systems. Research and development of redox flow battery for photovoltaic power generation; Shuhen gijutsu no kenkyu kaihatsu. Taiyoko hatsuden`yo redox denchi no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on R and D of redox flow battery for photovoltaic power generation in fiscal 1994. (1) On the production method of electrolyte, silica reduction treatment was attempted to use ammonium metavanadate recovered from boiler as electrolyte of redox flow battery. Silica removal rates more than 90% were achieved by crystallizing V as polyvanadate while keeping molten silica. It was ascertained in minicell experiment that trivalent and quadrivalent V electrolytes produced from recovered V are applicable to continuous charge/discharge operation for one week. (2) On development of battery systems, the relation between battery characteristics and physicochemical properties of carbon fiber electrodes was studied to improve carbon fiber electrodes. The efficiency of 80% was achieved at current density of 160mA/cm{sup 2} by use of layered electrodes, resulting in considerable cost reduction. Performance evaluation operation of the 2kW battery prepared in the last fiscal year was also carried out. 4 figs.

  6. Research and development of evaluation system for photovoltaic power generation system. Research and development on evaluation technology of photovoltaic power generating systems; Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu. System hyoka gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on R and D of evaluation technology for photovoltaic power generating systems in fiscal 1994. (1) On preparation of test facility and measuring instrument, the pyrheliometer with a photovoltaic device as sensor was developed. (2) On collection and analysis of data, operation data of interconnection system, stand alone system, and water pump system were collected, and energy flow was analyzed. The following were also analyzed: time variation of a-Si solar cell modules, fluctuation correction factor of spectrum response, that of nonlinear response of crystalline solar cells, effect of solar radiation intensity and wind velocity on temperature rise of modules, and correction factor of DC circuit losses. (3) On on-site measurement technology, the array output measuring instrument was developed on the basis of capacitor charge system. (4) On simulation technology, simulation analyses of energy flow, optimum capacity of interconnection systems, correction factor of solar radiation, and capacity of array storage batteries were conducted. 3 figs., 6 tabs.

  7. Research and development of peripheral technology for photovoltaic power systems. Research on engineering methods for cost effective PV installation; Shuhen gijutsu no kenkyu kaihatsu. Tashu secchi koho no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on R and D of engineering methods for photovoltaic power system installation in fiscal 1994. (1) On the survey on applicable fields, various application aspects, applicability, and problems on location and legal regulation were continuously studied for railway, river reservation, lake surface and public facility as promising locations after highway in the last fiscal year. The result pointed out relatively easy possibility of PV power generation of nearly 11,700MW except residence and building fields. (2) On installation technology of solar cell arrays, several models based on various installation conditions, construction methods and system configurations were studied, and various application aspects were proposed by combination of simple design conditions. (3) On test and evaluation of the structural design of array racks, wind tunnel experiments were conducted for structure wall, platform shed and highway sound insulation wall. (4) On basic design of various promising systems, the conceptual design of interconnection systems was carried out assuming applications to highway and railway. 7 figs., 3 tabs.

  8. Research and development of peripheral technology for photovoltaic power systems. Development of inverter technology for photovoltaic (PV) system which is connected to the utility grid; Shuhen gijutsu no kenkyu kaihatsu. Fukusu kino tan`itsuka shuhen sochi no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on development of integrated multifunctional peripheral equipment in fiscal 1994. (1) On development of inverters with no transformer, the following study results were obtained. Converter efficiency reached the target of 95.0% by using an improved general purpose IGBT as switching element of main circuit. Distortion factor of output current harmonics achieved 5% in total current distortion factor, and less than 3% in each order harmonic current one. In control of the DC part of output current, the target less than 0.3% was achieved by inserting a capacitor into detection signal circuit and by detection/correction control of current detector offset. Detection level of 100mA was achieved for DC grounding detection by installing a DC grounding detector in the DC input side of inverters. VCCI 1 level was also achieved for EMI measurement. (2) On development of integrated multifunctional peripheral equipment, evaluation test of the prototype equipment of 0.025m{sup 3} in volume and 17kg in mass was carried out. 3 figs., 1 tab.

  9. Fiscal 2000 achievement report. Welfare technosystem research and development (Osaka); 2000 nendo welfare technosystem kenkyu kaihatsu (Osaka) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Efforts were made to develop welfare equipment systems capable of satisfying local requirements for helping those in need of nursing care live an independent life, for supporting social welfare activities, and for relieving the loads imposed upon care givers. Efforts were made to develop (1) technologies for improving on the urban type residential space according to the degree of handicap that aged people suffered, (2) a comprehensive self-subsistence assisting system, and (3) a system for monitoring aged people and a system for reporting. Under item (1), flooring materials, flooring systems, residence modification, and welfare equipment were examined for securing a residential space suitable for each of the handicapped persons living in the urban space. Under item (2), efforts were made to develop an integrated assisting system for motor driven wheelchair equipment with a wheelchair regarded as the inevitable partner of a handicapped person, and to develop a toilet seat provided with an automatic elevator capable of sensing human presence. Under item (3), the toilet was assumed to be an accident frequented location, and a system was developed capable of detecting and reporting anomalies in a person seated still. (NEDO)

  10. Fiscal 2000 achievement report. Welfare technosystem research and development (Sapporo); 2000 nendo Welfare technosystem kenkyu kaihatsu (Sapporo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Activities are conducted on system technologies for ensuring comfortable living circumstances and thereby helping aged or handicapped people live independently in snowy cold regions. The research and development efforts center about the three fields of (1) in-house systems to help aged or handicapped people live an independent life, (2) in-home care equipment systems suitable for advanced welfare oriented residences, and (3) user interface controllers to improve on operating sensation in a motor driven wheelchair. In field (1), studies involve the development of low floor residences for snowy cold regions, improvement on entrances for independent residences helping the inhabitants lead an independent life, and functionally excellent designs for handrails for steps, stairs, or bathrooms. In field (2), surveys are conducted concerning design improvements and their acceptability relative to a universal welfare equipment controller, optimum sound that welfare equipment alarms should produce, and transfer devices. In field (3), studies are made about motor driven wheelchair controllers. (NEDO)

  11. Research and development of laser radar for environmental measurement. 2; Kankyo keisokuyo laser radar no kenkyu kaihatsu. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This project was received by Optoelectronic Industry and Technology Development Association from NEDO, and aims to contribute to the improvement of Indonesia's environmental administration through the development of an air pollution observing laser radar (LR) and of an environmental information network system fit for use in the country in cooperation with Indonesian engineers. LRs will be installed at several sites in an urban area where environmental problems are increasingly serious, and a observation network system will be constructed to link the laser radar sites. The observed data will be collected, analyzed, and processed by an observation data processing center for the investigation of the three-dimensional spatial distribution of air pollution to determine the actual state of air pollution over an urban area. The laser radars and the network will be placed in the city of Djakarta. The Indonesian authority responsible for the project is Indonesian Institute of Sciences. In fiscal 1994, part of the equipment (difference absorbing LR) was designed and manufactured, the design of the environmental information network system was developed, and various researches required in this connection were conducted. (NEDO)

  12. Fiscal 1998 achievement report on welfare technosystem research and development. Shizuoka; 1998 nendo walfare technosystem kenkyu kaihatsu (Shizuoka) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Shizuoka Welfare Technohouse Research Committee, in its effort to perform research and development of welfare technosystems, is engaged in the study of research policies basic to manufacturing, that is, what to develop, for whom, and how. It is concluded that research and development be carried out for manufacturing universal design products which will correctly reflect consumers' needs in aged society with a lowered childbirth rate, for offering such products at lower cost, and for bringing about an increase in the number of consumers. It is also decided that, in order to achieve the object and to verify that the products are easy-to-use items even for people having handicaps or meeting difficulties in their daily life, anthropometric data and other data of human behavior and biological response be collected for incorporation into an ergonomic simulation system for research and development for the establishment of technologies for novel digital manufacturing. Studies are conducted for the establishment of technologies for developing universal design products and technologies for assessing such products through the application of ergonomics for contribution to the enhancement of commercialization of products for aged society in Shizuoka Prefecture in compliance with the said two research policies. (NEDO)

  13. Fiscal 2000 achievement report. Welfare technosystem research and development (Kamogawa); 2000 nendo welfare technosystem kenkyu kaihatsu (Kamogawa) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of assisting in-home medical care, a system to enable in-home acquisition, compression, accumulation, distribution, and regeneration of auscultatory sounds (cardiac sound, respiratory sound) is added to telemedicine assisting system technologies for remotely located doctors' decisions and instructions for in-home medical care. In fiscal 2000, for improvement on the already-developed system, operationality was improved, uptake was realized of still images (digital camera pictures) mainly for diseases in dematology where such is strongly demanded, and a transmitter function was augmented. The system enables the PHS (personal handyphone system) aided exchange of medical data between portable terminals on patrol and (doctors') personal computers through the personal computer server in the hospital. Doctors are able to administer remote telemedicine now that biomimetic information on remotely located patients such as still medical images and auscultatory sounds necessary for diagnosing is available in the hospital. (NEDO)

  14. Trend of research and development of combustors for jet engines. Koku engine yo nenshoki no kenkyu kaihatsu doko

    Energy Technology Data Exchange (ETDEWEB)

    To, H. (Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan))

    1994-03-10

    To the aeroengine, a requirement for an improvement of the fuel consumption ratio from a viewpoint of the energy saving and for a reduction of the harmful exhaust materials from a viewpoint of environmental protection is being increasingly elevated. In order to improve a fuel consumption ratio of engine, making it a higher temperature and pressure is attempted for raising a engine cycle efficiency, and moreover there is a trend to elevate an inlet pressure and temperature of the combustor as for a combustor, and consequently an outlet temperature of the combustor becomes higher. Therefore to the combustor, a durability elongation of the liner and fuel injection valve, as well as a correspondence to a range expansion of a fuel-air ratio of the combustor are demanded. As the harmful exhaust materials, there are unburned hydrocarbon (UHC), carbon monoxides (CO), nitrogen oxides (NOx), and smoke. A reduction of NOx is most strongly requested at present. In addition to these requests on the combustor, making a study and development of the combustor more efficient is being demanded. For this purpose a numerical analysis is utilized by adapting the various purposes. As the recent utilization methods, the prediction examples of exhaust gas quantity are frequent. 14 refs., 12 figs., 1 tab.

  15. Fiscal 1998 achievement report on welfare technosystem research and development. Ishikawa; 1998 nendo walfare technosystem kenkyu kaihatsu (Ishikawa) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research and development is made concerning the 'technology of independent life promotion at home after discharge from hospital' and 'technology of house design suitable for meeting handicaps,' and a 'simplified house capable of promoting independence' is developed, which duly accommodates the needs of old and handicapped people. For the elucidation of house designing techniques and welfare apparatus utilization methods so that old or handicapped people will enjoy a comfortable living, their physical functions and basic behavior in their daily life are analyzed. As the result, it is found that it is important to understand their working abilities under each of the three categories of hemiplegia, paraplegia, and complete tetraplegia and to assist them accordingly, and conditions are prepared for designing a house that will appropriately deal with behavior patterns under each of the three categories. Design specifications are worked out for a Welfare Technohouse Ishikawa which satisfies all the design requirements. Making use of the specifications, a layout is completed, in which environments and facilities of the bedroom, stool, wash room, and the bathtub of the Welfare Technohouse Ishikawa are condensed in a minimum-size detached room designed to be carried in a 4-ton truck. (NEDO)

  16. Fiscal 1998 achievement report on welfare technosystem research and development. Nagaoka; 1998 nendo walfare technosystem kenkyu kaihatsu (Nagaoka) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research and development is carried out to help aged people get employed in manufacturing industries. Important problems to solve before they can work in the field of fabrication or assembling involve deterioration in working environment recognition capability due to poor eyesight, reduction in work efficiency due to muscular weakness, and degradation in work precision due to quivering fingers, all these attributable to disfunction typical of advanced age. Accordingly, it is deemed that experienced old people's skill will be fully made use of if their deteriorated sensing and manipulating capabilities are mechanically supplemented. In this research, basic studies are conducted concerning a workpiece position/attitude recognition system for supplementing poor eyesight and an operation type manipulator capable of providing the sense of force. In the study of the recognition system, a method is considered, in which the selection of the necessary workpiece is dependent on the worker' ability and the position/attitude of the selected workpiece is measured by a sensor. In the study of the manipulator, a method is considered, in which the handling of the workpiece is performed by a manipulator similar in structure to that of an industrial robot and an active joystick is used to indirectly handle the workpiece. In fiscal 1998, designing and tentative fabrication are launched. (NEDO)

  17. Research and development of jellyfish compaction technology; Kurage gen'yoka shori gijutsu ni kansuru kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Uemura, N. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1999-12-10

    An on-site test is conducted of devices for reducing in a short time the volume of jellyfish that flow into power plants. There are three methods to reduce the volume of jellyfish by separating water from them, which are heating, pressing, and chemical. The chemical treatment is not an object of this test because it is expected that the volume reduction rate by this method will be too low. For the achievement of a reduction rate of 80%, the two methods, physical and crushing, are compared at the laboratory level. It is found that the crushing method is superior because it can dispose of jellyfish in a shorter time. Using this method, the crushed jellyfish is separated into drain and bubbles, the latter containing jellyfish fragments. An on-site test is conducted using a general-purpose crusher. The relationship between the filter diameter (1-5mm) and the separation rate is investigated, and it is found that separation proceeds more rapidly when the filter diameter is smaller. It is found that the addition of a certain chemical accelerates the separation. COD (chemical oxygen demand) is 300-490mg/l in the drain, and BOD (biological oxygen demand) 400-500mg/l, with COD having increased by approximately 20%. A study is scheduled to be conducted using an experimental apparatus. (NEDO)

  18. Report on technological trend survey in fiscal 2000. Survey on bio-technology development strategy; 2000 nendo gijutsu doko nado chosa hokokusho. Bio technology gijutsu kaihatsu senryaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Survey and research have been performed on bio-technologies as to their seeds of technological development projects to be worked on by the government from the viewpoint of industrial utilization technologies. In the survey on the trends of research and development and technological development on human-genomes, the survey has been done on the status of execution in the Millennium Genome Project, and how the works related to human-genomes are done at the bio-related government based research organizations and the private sector research organizations. Trends related to the human-genome research in overseas countries were also surveyed. With regard to the future prospect of research and development in the post genome age, discussions were given on the result of the questionnaire survey on opinion leaders in the industrial, governmental and academic areas. In discussing the viewpoint of the industrial utilization technologies related to human genomes, candidates assumed usable in the genome related application fields were discussed, and a basic framework of a technological map was prepared. Based on the results thereof, the technological development areas anticipated to be important in the future were extracted, and the technological development themes were discussed. (NEDO)

  19. Fiscal 1997 report on the results of the R and D of industrial scientific technology. R and D of synergistic ceramics (R and D of corrosion prevention technology for the petroleum production system); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu seika hokokusho. Synergy ceramics no kenkyu kaihatsu (sekiyu seisan system fushoku boshi gijutsu kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To heighten durability and safety of materials/parts for undersea oil drilling, the development of ceramic base materials was made by developing function harmony type process technology which harmonizes on a high grade contrary characteristics and various functions. The paper summed up the fiscal 1997 results. In the design of system formation, computational simulation technology was developed to the composite process and the diploid system. The development of multifunction simultaneous manifestation materials was trially made by the higher nano structure process. A study was made of control of microstructures of porous materials and matrix filling by the gas phase precipitation control. Proposed were selective control of grain growth from species crystals and the columnar particle orientation laminated structure of simultaneous manifestation of strength and toughness. By composite precipitation reaction control, studied were simultaneous dispersion of whisker and increase in density of matrixes, and harmonization with long fibers. Silicon nitride was trially made with low lubrication/friction coefficients and high strength. A simulation method for crack progress behavior evaluation was developed using a testing notched specimen heterogeneous microstructures. Analyses were made of brittle fracture mechanics and reliability evaluation. 273 refs., 344 figs., 29 tabs.

  20. Fiscal 1996 report on the R and D result of industrial science and technology. R and D synergy ceramics (R and D on synergy ceramics); 1996 nendo sangyo kagaku gijutsu kenkyu kaihatsu seika hokokusho. Synergy ceramics no kenkyu kaihatsu (synergy ceramics no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper summarizes the general survey mainly conducted by FCRA (Fine Ceramics Research Association) in fiscal 1996, and the joint research results with some universities, from some R and D on synergy ceramics. Silicon nitride based ceramics expressed the same high thermal conductivity as metal by seed crystal addition, grain growth control and orientation control of sheet lamination. For its practical use, study was made on control factors of material, formation and sintering. Ca2Y2Si2O9 single crystal was prepared by float-zone method to determine its crystal structure. No volume change due to high-temperature phase transition as thermal expansion was found. In carbothermal reduction- nitridation of SiO2, addition of Si3N4 seed powder increased a reaction rate and formed uniform particles with an isotropic shape. An average particle size was dependent on the size and number of fine particles in seed powder. Addition of both Si3N4 and Fe compound could change a particle shape from a spherical grain to an elongated grain. A spherical Fe-Si metal grain was found on the tip of an elongated grain. 66 refs., 73 figs., 13 tabs.

  1. Fiscal 1997 report on the results of the international standardization R and D. R and D of a mobile office system (R and D of next generation mobile business terminals); 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Mobile office system no kenkyu kaihatsu (jisedai keitai joho kiki no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This R and D is aimed firstly at trially developing next generation mobile business terminals (MBT) based on the technical standards of MBT of which the standards were completed in the fiscal 1996 R and D of Mobile Office Promotion Association (MOPA), secondly at developing an evaluation method for trial terminals and establishing the technical standards of MBT through data communication among different terminals and confirmation of application motions, and thirdly at promoting the international standardization. The study was conducted in the following procedures: 1) making of a comprehensive examination-standardization working group, determination of the use of trial terminals and the MBT evaluation method; 2) trial development of the MBT standards and prototypes; 3) study of the MBT evaluation method; 4) evaluation test on the prototypes; 5) comprehensive evaluation. As the fruit of the study, the evaluation/test specifications were completed, and the evaluation tests among different terminals were conducted. As a result of the evaluation test, the transplantation of MBT managers was done almost with no problems. The MBT adaptability evaluation test was also done almost without problems. 6 figs., 6 tabs.

  2. Fiscal 1996 verification survey of geothermal exploration technology. Development of the fracture type reservoir exploration method (development of the elastic wave use exploration method); 1996 nendo chinetsu tansa gijutsu nado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of exploring accurately fracture groups greatly restricting the fluid flow of geothermal reservoirs, technical development was made for applying the elastic wave exploration technology such as the high precision reflection method, VSP, elastic wave tomography to the geothermal exploration. The Okiri area, Kagoshima prefecture was selected as a demonstrative field of a typical type where the steep and predominant fracture rules the geothermal reservoir, and experiments were conducted using the high precision reflection method and VSP. Fracture models were made, and the analysis results were studied by a survey using the array CSMT/MT method and by a comparison with existing data. Reformation of the underground receiving system used for VSP and elastic tomography is made for improvement of its viability, and was applied to the VSP experiment. The treatment/analysis system of the core analyzer was improved, and cores of the demonstrative field were analyzed/measured. Further, the exploration results, core analysis results and existing data were synthetically analyzed, and fracture models of the demonstrative field were constructed. Also, effectiveness and viability of the elastic wave use exploration method were studied. 90 refs., 418 figs., 24 tabs.

  3. Fiscal 1996 verification survey of geothermal exploration technology. Development of the fracture type reservoir exploration method (development of the elastic wave use exploration method); 1996 nendo chinetsu tansa gijutsu nado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of exploring accurately fracture groups greatly restricting the fluid flow of geothermal reservoirs, technical development was made for applying the elastic wave exploration technology such as the high precision reflection method, VSP, elastic wave tomography to the geothermal exploration. The Okiri area, Kagoshima prefecture was selected as a demonstrative field of a typical type where the steep and predominant fracture rules the geothermal reservoir, and experiments were conducted using the high precision reflection method and VSP. Fracture models were made, and the analysis results were studied by a survey using the array CSMT/MT method and by a comparison with existing data. Reformation of the underground receiving system used for VSP and elastic tomography is made for improvement of its viability, and was applied to the VSP experiment. The treatment/analysis system of the core analyzer was improved, and cores of the demonstrative field were analyzed/measured. Further, the exploration results, core analysis results and existing data were synthetically analyzed, and fracture models of the demonstrative field were constructed. Also, effectiveness and viability of the elastic wave use exploration method were studied. 90 refs., 418 figs., 24 tabs.

  4. FY 1999 report on the development of technology to recycle architectural waste materials, glass, etc. Development of technology to recycle architectural waste materials; 1999 nendo kenchiku haizai glass nado recycle gijutsu kaihatsu seika hokokusho. Kenchiku haizai recycle gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    Waste wood materials in the materials discharged from architectural disassembly were regarded as a potential wood resource, and the R and D of the technology to recycle these were conducted. Studies were made on the technology to finely grind waste wood materials, technology to compress/form waste wood materials and ground wood powder, verification of strength characteristics/dimension stability of the formed wood materials, etc. As to the wood materials which were badly degraded under ultra violet rays, they were coloring-processed by the steam treatment, and a possibility of coating substitution was confirmed. In relation to the technology to produce compressed wood materials, the optimization of heat treatment conditions was experimentally conducted. About the technology to give dimensional stability, dimensional stability was improved as a result of the improvement of chemicals feeding and the development of chemically processed drugs. In the development of light formed products, the board was successfully formed which is light in weight using lignocelluloses/inorganic hydrates and has the bending strength higher than that of the plaster board. In the development of interior materials, the technology was developed in which ground wood powder and thermo-plastic resin are mixed for die molding, and the OA floor using this was commercialized. (NEDO)

  5. Research and development of utilization technology of solar thermal energy system for industrial and other use. International joint technology development for solar energy utilization systems; Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Taiyo energy riyo system kokusai kyodo gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for international joint technology development for solar energy utilization systems. The joint study with an Indonesian research institute takes a model of lumber drying plant for the design and feasibility study. All the parts it needs are technically available in Indonesia, except carbon fiber sheets and electronic devices for controlling purposes. The drying cost is higher than that of a plant which procures charge-free wood fuel, but lower than that of a plant which procures fuel at 30$/t. A cacao drying plant model is also studied. The feasibility study shows that the initial investment for the blowing-up model is much higher by 60% to 100% than that for the conventional plant. Its fuel cost is lower by 11% than that of residual oil but 27% higher than that of wood. 4 figs.

  6. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of new software structuring models (R and D of micromachine cooperative control use software); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Shin software kozoka model no kenkyu kaihatsu (bisho kikai kyocho seigyoyo software no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A R and D was conducted of software structuring models which ease the development and maintenance of software systems and meet diversification of needs. As for the study of the cooperative control use programming language, a R and D of agent oriented language Flage was carried out for expansion of language function, arrangement of network function, development of exercises, etc. As to the formulation of agent knowledge, proposed were processes to make a program from the specifications, and EVA, a mechanism in response to changes in the specifications of existing programs. In relation to the basic theory of cooperation system, a study was made mainly of object oriented attribute grammar OOAG as a model representing cooperative computation in software process as a rule group. Concerning the study of the situation recognition mechanism, researched were models of communication and reasoning among agents in cooperation. 187 refs., 107 figs., 23 tabs.

  7. Flotabilidad y similitud del nado de Manta birostris(Elasmobranchii: Myliobatidae con el ciclo de vuelo de Columba livia(Aves: Columbidae

    Directory of Open Access Journals (Sweden)

    Iván Meza Vélez

    2013-12-01

    Full Text Available Se analizó la física de la flotación en la mantarraya Manta birostrisy se comparó el nado con el ciclo de vuelo de la paloma doméstica Columba livia, con la finalidad de encontrar similitudes y diferencias en las locomociones y las leyes físicas que intervienen. Se demostró que uno de los dos ciclos de nado estudiados de esta especie posee tres de las cuatro fases principales del ciclo de vuelo de la paloma doméstica. También se demostró un “efecto paracaídas” en M. birostris, el cual le ofrece una ventaja en su locomoción. Adicionalmente, se describió cómo el concepto físico de torque se aplica al giro de esta especie.

  8. Análise do tempo de reação a partir do desempenho motor de adolescentes praticantes do nado Crawl

    Directory of Open Access Journals (Sweden)

    Guilherme Ribas Smidt

    2015-12-01

    Full Text Available O Este estudo teve como objetivo avaliar o tempo de reação simples (TRS e de escolha (TRE e o desempenho no nado crawl em diferentes níveis de aprendizagem. Fizeram parte deste estudo 26 sujeitos com idade média de 12.15 anos divididos em dois grupos: iniciantes (G1 e avançados (G2. Avaliou-se o tempo de reação (TR por meio de um software e o nado crawl com o Teste de Desempenho Motor do Nado Crawl. Os resultados demonstraram diferença no TRS com média de G1 = .341s e G2 = .271s (t = ˗ 3.670; p = .001; TE= 0.60 e no TRE com média de G1= .651s e G2= . 492s (t = ˗ 4.016; p = .001; TE= 0.63, indicando que no estágio avançado os aprendizes possuem melhores tempos de resposta. Uma correlação moderada encontrou-se entre G1 (iniciante e TRE (avançado (r = - 0.560; p = 0.046, e G2 (avançado e TRS (avançado (r = - 0.685; p = 0.010. Conclui-se que o TR é importante para o sucesso na performance do nado crawl uma vez que seu aprimoramento resulta em menores gastos de tempo em indivíduos em estágio avançado.

  9. Development of coal liquefaction technologies (Part 3); Development of common base techniques (Part 4). Development and employment of evaluating approach to liquefied process. Development of data collecting and processing system for coal liquefaction process and etc. Sekitan ekika gijutsu kaihatsu (3); Kyotsu kiban gijutsu no kaihatsu nado (4). Ekika process no hyoka shuho no kaihatsu, unyo. Sekitan ekika process nado no data no shushu, Shori system

    Energy Technology Data Exchange (ETDEWEB)

    1989-09-01

    This research aims to develop the management system of informations concerning coal liquefaction process and etc., to develop data collecting and processing system on pilot plant and supporting researches and to effectively use data to advance to following step such as conceptural design for the demonstration plant. In addition, this research aims to collect many kinds of techniques obtained by the research and development and to arrange and promote the licensing system to practically use this system. Practical results in 1988 were as follows: Conceptural design on basic data base and retrieval or look up system on general technical informations were carried out to develop the data base system for coal liquefaction and to develop the data collecting and processing system for the coal liquefaction process and etc. Data locative leveling was carried out as the conceptural design for basic data base and the basic structures of hardware and software were made up as the basic design for the retrieval system of general technical informations. 4 figs., 1 tab.

  10. Fiscal 1997 R and D project on industrial science and technology under a consignment form NEDO. R and D of the technology of accelerated formation of bio-functions; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As a part of the study on accelerated formation of bio- functions, analysis technology of experimental systems for in vitro evolution of protein molecules was studied. For the analysis, recognition of a fitness landscape is indispensable. Improvement of adaptive walk is possible through its analysis in an ordered space based on features of the landscape. By the last fiscal year, the knowledge of the fitness (heat-stability) landscape was obtained in the experimental system of PEP (prolyl endopeptidase) in which an adaptive walk mechanism was found to function effectively (mutated protein with a heat-stability effectively improved by adaptive walk was obtained). To obtain more general fitness landscape information, landscapes of various proteins to a fitness should be examined, and the effectiveness of approaches to efficient adaptive walk on the fitness other than a heat-stability should be clarified. The second experimental system using LOD (lactate oxidase) was thus constructed to examine the heat-stability landscape. In addition, the system of in vitro molecular evolution of proteinase inhibitor (Cystatin B) was constructed. 3 refs., 3 figs., 2 tabs.

  11. Fiscal 1998 research report on the R and D on industrial science and technology for creating new industries. R and D on intelligent material and structure systems (Development of practical technology for rational use of energy); 1998 nendo shinki sangyo soshutsugata sangyo kagaku gijutsu kenkyu kaihatsu seika hokokusho. Chiteki zairyo kozo system no kenkyu kaihatsu (energy shiyo gorika kankei gijutsu jitsuyoka kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    As a part of development of intelligent material/structure systems, study was made on practical technology for rational use of energy. For resource saving and energy saving (smartening) for large and complex machines and structure systems, light-weight long-life materials/structures are indispensable. Study was thus made on the basic technology of material/structure systems equipped with realtime defect detection function, structural integrity diagnosis function and control function of noise and vibration through information processing and control by integrating composite material/structure and fiber or film sensor material/device. For development of smartening technology, sensing technology was studied to detect the interior structure of composite material/structure compacts. The basic fabrication technology of ceramic actuator materials/devices, and shape memory alloy system actuators were put into development. Smooth connection and cooperation among groups were promoted through the technical committee and research on domestic and overseas trends for forming common knowledge. (NEDO)

  12. Industrial science and technology research and development business for fiscal 1998. Research and development achievement report on glycoconjugate production and utilization technologies (Development of technologies of glycoconjugate-aided CO{sub 2} fixation and utilization); 1998 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu seika hokokusho (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Enzymatic and chemical methods were combined and methods were developed for synthesizing mucin type sugar chains and glycopeptides. The influence of sugar chain positions and structures on glycoconjugate stereo structures and physiological activities was analyzed, and glycopeptide structural activities and glycoconjugate remodelling were studied. To create an industrial advantage in a glycoprotein production system by use of zooblasts, sugar chain structure control through sugar transfase occurrence control was studied. For the production of man-adaptive sugar chains using yeast, new yeast variations were subjected to molecular breeding, and tested for the resultant improvement on productivity. Sugar chain marking and refining techniques and various responding mechanisms on the solid surface were elucidated, which enabled structure analyses using sugar chain recognition molecules such as lectins and antibodies. A database on interactions between sugar chains and sugar chain recognition molecules was constructed using the said findings. An analyzing program was also formulated tentatively. This paper also covers general surveys and studies on technologies of producing and utilizing glycoconjugates. (NEDO)

  13. Fiscal 1996 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials; 1996 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Technologies were described of creating original high-functional materials. The paper presented the following two as fields of technology on which importance is to be placed for the future R and D from technological and socioeconomic points of view. In the field of new materials of living organism imitation type, remarkably high-performance/high-functional new materials are invented by imitating the precise function manifestation mechanism of the ultimate living organism in which a great variety of matters are in harmony with each other and manifest complicated and high-level functions. In the field of structural control/synthesis process technology, the paper is aimed at manifestation of newer and higher functions/performance and innovation of the synthesis process, and also at developing technology to precisely control structure and process of materials including surface and interface in correspondence with atomic/molecular to macro levels. Up to the present, conducted were an examination of autonomous response materials (the subtheme is a R and D of polymer/composite multi-stimuli-responsive materials) and a R and D of precise polymerization (control) polymer materials. 239 refs., 129 figs., 49 tabs.

  14. FY 2000 report on the results of the regional consortium R and D project - Regional consortium R and D field. Third year report. Advanced multi-axis machining system with non-rotating tools; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium kenkyu kaihatsu bun'ya. 6 jiku koseido heru kako system no kaihatsu (dai 3 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    As element technology to continuously control attitude and feed of tools, development was made of precision machining technology, 6-axis CAM/CAE system and high speed high precision NC control technology. A high precision non-rotating tool machine was trial-manufactured which enables the heightening of precision in machining of mold curved surfaces/complicated shaped parts, and the practicality was verified. In FY 2000, as to the machining technology relation, it was verified that it is possible to machine the mirror surface at 0.1{mu}mRy using diamond non-rotating tool to aluminum materials. In CAD/CAM relations, a high speed high precision CAM/NC interface system based on ISO14649 was developed. Then, by the tool path made by this system, cutting experiment/evaluation were conducted. Further, a new system for cutting reversely tapered grooves was designed, and the cutting experiment was carried out. In the NC relation, development was made of the NC system loaded with the work coordinate interpolation function for conducting high precision multi-axial interpolation on high speed NC board and also of the high speed servo network using IEEE1394. (NEDO)

  15. Fiscal 1997 report on the results of the introductory R and D of the New Sunshine Project under a consignment from NEDO. Introductory R and D of the supercritical fluid use technology; 1997 nendo `New Sunshine keikaku` sendo kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chorinkai ryutai riyo gijutsu sendo kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The R and D of chemical reaction using supercritical fluids started in fiscal 1997. In the R and D of solvent reaction, as the research on polymer decomposition with supercritical water, studies were conducted of the mechanism of conversion reaction to chemical materials, cleavage mechanism of stable chemical bonds, and synthetic reaction in the supercritical state reaction field. In the research on oxidation reaction, as the study of complete oxidation in supercritical water for high efficiency energy recovery, studies of complete oxidation of liquid fuels, and complete oxidation of solid fuels. In the research on hydrogenation, studies of lightening of heavy oil in supercritical water, etc. In the R and D of the basic technology, studies of corrosion mechanism of metals in supercritical water, construction of the basic framework for technical database of supercritical fluids, etc. In the survey of technical trends and new research themes, the introductory R and D of element technology, etc. were conducted, and the results were described of the survey of technical trends and new research themes and the trend survey of overseas technology. 314 refs., 87 figs., 81 tabs.

  16. Fiscal 1997 R and D project on industrial science technology under consignment from NEDO. Report on the R and D of nonlinear optoelectronic materials; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Hisenkei hikari denshi zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to the development of organic base materials, the paper is going ahead with an evaluation, higher performance and further use as materials of basic optical properties of quirale nonlinear materials and organic conjugate base materials which are promising among organic low molecular materials. As the development of orientation control crystal growth technology, grooves for orientation control were formed on the surface of the lead glass substrate, from which thin film single crystals were obtained. The nonlinear response was studied of the glass where semiconducting fine particles dispersed in matrix glass. Glass scattering base prototype materials were selected by the sol-gel method and ultra-low melting-point glass method. The glass dispersion base materials by the very fast cooling method was also studied. For the purpose of realizing a high speed switching characteristic, a processing technology was developed of ultra fine particle dispersing polymer light waveguide. As to the technology for super lattice, the optimum nonlinear performance materials were selected mainly with the optimum complex super lattice base. Moreover, the three-dimensional super structuring technology was constructed to improve nonlinear optical characteristics. The comprehensive investigational study was conducted for effective promotion of the research development. 177 refs., 260 figs., 27 tabs.

  17. Fiscal 1997 report on the results of the introductory R and D of the New Sunshine Project under a consignment from NEDO. Introductory R and D of the supercritical fluid use technology; 1997 nendo `New Sunshine keikaku` sendo kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chorinkai ryutai riyo gijutsu sendo kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The R and D of chemical reaction using supercritical fluids started in fiscal 1997. In the R and D of solvent reaction, as the research on polymer decomposition with supercritical water, studies were conducted of the mechanism of conversion reaction to chemical materials, cleavage mechanism of stable chemical bonds, and synthetic reaction in the supercritical state reaction field. In the research on oxidation reaction, as the study of complete oxidation in supercritical water for high efficiency energy recovery, studies of complete oxidation of liquid fuels, and complete oxidation of solid fuels. In the research on hydrogenation, studies of lightening of heavy oil in supercritical water, etc. In the R and D of the basic technology, studies of corrosion mechanism of metals in supercritical water, construction of the basic framework for technical database of supercritical fluids, etc. In the survey of technical trends and new research themes, the introductory R and D of element technology, etc. were conducted, and the results were described of the survey of technical trends and new research themes and the trend survey of overseas technology. 314 refs., 87 figs., 81 tabs.

  18. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the environment friendly type production technology. High-functional chemical synthesis bioreactor (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bioreactor) kenkyu kaihatsu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of developing production technology of chemical substances which are resource conservative, energy saving and less in environmental loads, a R and D was conducted of a high-functional chemical synthesis bioreactor. The paper reported the results of fiscal 1996. As for proliferation control breeding technology, relating to the switch control technology of proliferation related genes by regulatory factors, the effectiveness on an incubator level was demonstrated, and at the same time improvement of reactor performance in using this technology was studied on paper. As to the manifestation control breeding technology, the actual design of the development of manifestation promotion technology by bent DNA, etc. was proceeded with, and at the same time the following were commenced: selection of bent DNA, confirmation of bent characteristics, and work of vector construction using candidate bent DNA. Further, the simple assessment system of manifestation vectors was constructed. In the development of bioreactor system technology, the actual design was started of the two-stage culture continuance system which separated proliferation and enzyme production. 48 refs., 41 figs., 6 tabs.

  19. Report on the results of research and development under a consignment from NEDO on deca-nano quantum integrating transistor substrate technologies; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Deca-nano ryoshi shusekika soshi kiban gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Researches have been conducted on deca-nano quantum integrating transistor substrate technologies, and developments were made on a three-dimensional device simulator which can be used in deca-nano domains, and a circuit simulator to have quantifying function transistors coexist with silicon semiconductor integrated circuits. The researches were intended to develop a simulator capable of analyzing properties of very small silicon and compound semiconductor devices in deca-nano domains. The researches discussed the applicability of conventional simulators, calculated quantum levels in a three-dimensional hetero structure, and resulted in development of an electron wave propagation simulator in optional two-dimensional shapes, a quantum Monte Carlo simulator, and a three-dimensional semiconductor device simulator with quantum correction. On the other hand, in order to estimate characteristics of a hybrid circuit in which single electron transistors coexist with conventional transistors such as CMOS transistors, a single electron hybrid circuit simulator was developed. The development indicated that a CMOS-SET fused memory is promising as a future LSI memory. 22 refs., 116 figs., 3 tabs.

  20. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the environment friendly type production technology. High-functional chemical synthesis bioreactor (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bioreactor) kenkyu kaihatsu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of developing production technology of chemical substances which are resource conservative, energy saving and less in environmental loads, a R and D was conducted of a high-functional chemical synthesis bioreactor. The paper reported the results of fiscal 1996. As for proliferation control breeding technology, relating to the switch control technology of proliferation related genes by regulatory factors, the effectiveness on an incubator level was demonstrated, and at the same time improvement of reactor performance in using this technology was studied on paper. As to the manifestation control breeding technology, the actual design of the development of manifestation promotion technology by bent DNA, etc. was proceeded with, and at the same time the following were commenced: selection of bent DNA, confirmation of bent characteristics, and work of vector construction using candidate bent DNA. Further, the simple assessment system of manifestation vectors was constructed. In the development of bioreactor system technology, the actual design was started of the two-stage culture continuance system which separated proliferation and enzyme production. 48 refs., 41 figs., 6 tabs.

  1. Freestyle swimming technique variations using a parachute Variaciones en la técnica de crol durante el nado resistido con paracaídas

    Directory of Open Access Journals (Sweden)

    J.M. García

    2010-09-01

    Full Text Available

    The appearance of new assistance materials like the parachute make it necessary for coaches to know about the impact that such devices have in swimming. To study this theme 16 national and international swimmers between 19 and 24 years old have been selected. The swimmers participated in four tests that consisted in freestyle (crawl stroke swimming for 10 and 45 seconds at maximum intensity, both with and without the parachute. These tests analysed stroke frequency and stroke length. A within-subjects design has been applied and a study of the facts has been made with an AVAR with repeat measures. The results indicate that the stroke frequency decreases (p<0.05 in the parachute swim during the 10 and 45 second tests, compared with the normal swim. It was also observed that the stroke frequency is higher (p<0.01 in the 10 second test than in the 45 second test. The stroke length is higher (p<0.01 in the normal swim test than in the parachute test. With respect to the swim periods of time, the stroke length is higher (p<0.01 in the 45 second test than in the 10 second test. The parachute swim produces important changes in stroke frequency and stroke length in both the 10 and 45 second tests in subjects swimming the freestyle at maximum intensity.
    KEY WORDS: swimming, swim resistance, parachute, crawl, freestyle,. stroke frequency, stroke length.

    La aparición de nuevos materiales auxiliares, como el paracaídas, hace necesario que los entrenadores conozcan las modificaciones que estos producen durante el nado. Para conseguir este objetivo se seleccionaron a 16 nadadores de nivel nacional e internacional comprendidos entre los 19 y 24 años. Éstos realizaron cuatro pruebas que consistieron en nadar a crol durante 10 y 45 segundos a máxima intensidad, utilizando el nado normal (NN y el nado resistido con paracaídas (NRCP. En estas pruebas se analizaron las variables

  2. INFLUÊNCIA DA COMPOSIÇÃO CORPORAL REGIONAL E TOTAL SOBRE O DESEMPENHO DE NADO E ÍNDICES AERÓBIOS

    Directory of Open Access Journals (Sweden)

    Dalton Müller Pessôa Filho

    Full Text Available RESUMO Introdução: Poucos estudos analisaram a contribuição da composição regional de nadadores para o perfil aeróbio, anaeróbio e o desempenho de nado. Objetivo: Verificar a influência da composição corporal regional e total sobre índices da aptidão aeróbia e anaeróbia em nado atado e livre, bem como sobre o desempenho de curta e média duração. Métodos: Onze nadadores (18,0 ± 4,0 anos foram submetidos a: (1 teste incremental em nado atado, com coleta de gases respiração-a-respiração (K4b2 associado ao novo-AquaTrainerâ; e (2 tempo limite nos desempenhos de 200, 400 e 800 metros de nado livre. A regressão linear entre distância e tempo (d-tLim empregou o método dos quadrados mínimos. O coeficiente de Pearson (r averiguou as correlações da composição corporal regional e total com índices da aptidão aeróbica e anaeróbica em nado atado e livre. Resultados: Os valores da massa isenta de gordura (MIG foram: 61,7 ± 7,4 kg; 7,5 ± 1,1 kg; 28,3 ± 3,7 kg; 22,1 ± 2,5 kg, respectivamente para corpo todo, membros superiores (MS, tronco (T e membros inferiores (MI. O consumo máximo de oxigênio (VO2max foi 52,1 ± 5,3 ml×kg-1×min-1, sendo a carga correspondente (iVO2max de 93,9 ± 12,2 N. O tempo em 200 (132,2 ± 9,7 s, 400 (296,8 ± 17,2 s e 800 metros (619,5 ± 26,9 s forneceu velocidade crítica (VC = 1,23 ± 0,06 m×s-1 e capacidade anaeróbica de nado (CNA = 35,8 ± 15,1 m. Observaram-se correlações de iVO2max, CAN e v200m com MIG para MS (r = 0,64; 0,67 e 0,76, porém a MIG para T, MI e corporal demonstraram correlações apenas com v200m (r = 0,75; 0,69 e 0,75 e CAN (r = 0,71; 0,69 e 0,75. Conclusão: Houve, portanto, influência da MIG regional e corporal sobre o desempenho de curta distância e reservas anaeróbias, sendo a MIG-MS também influente sobre a iVO2max, e assim relacionada ao aprimoramento do desempenho de nado.

  3. Report on New Sunshine Program-supported undertakings for fiscal 1997. Development of hot water power plant and deep-seated geothermal resources sampling/exploiting technologies; 1997 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu, shinbu chinetsu shigen saishu gijutsu no kaihatsu, shinbu chinetsu shigen seisan gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Reported are the results of researches conducted in fiscal 1997. In the field of PTSD (Pressure, Temperature, Spinner flowmeter, fluid Density) well logging, the high-temperature performance of a memory type PT (Pressure, Temperature) well logger is confirmed in a demonstration test. As for the S-probe, modification is effected for the reduction of the outside diameter from 70mm to 56mm, and tests are conducted in real wells. As for the D-probe, a laboratory test is conducted and then the probe behaves as predicted. In the field of PCT (Pressure, Chemical, Temperature) monitoring, the sampler is subjected to an on-site test in Italy, when water is successfully sampled out of the well. In the field of scale monitoring technique, deep-seated fluid is collected and examined, and the scale deposition rate in the deep-seated fluid is determine. For the study of production control technology with respect to scale prevention and removal, an Mg-Si scale synthesis test is conducted in the temperature range of 100-300degC, and it is found that the solubility of scale decreases with a rise in temperature. 19 refs., 93 figs., 24 tabs.

  4. Report on New Sunshine Program-supported undertakings for fiscal 1995. Development of hot water power plant and deep-seated geothermal resources sampling/exploiting technologies; 1995 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu, shinbu chinetsu shigen seisan gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Reported are the results of researches conducted in fiscal 1995. For the formulation of a general development design, data are collected about domestic high-temperature thermal wells through questionnaires and literature probing, and are scrutinized. As for the development of logging technology, a memory type PT (Pressure, Temperature) logger is experimentally constructed, and is found to properly operate in an environment of up to 350degC in a production well. An experimentally manufactured S-probe proves to be capable of heat insulation and sealing. In the field of PT monitoring, a high-temperature optical fiber is experimentally fabricated for study, capable of measuring temperatures up to 400degC. As for the development of high-temperature tracer monitoring technology, basic experiments are conducted about the thermal characteristics of aromatic acids, and preparatory experiments about gas phase tracers. In the study of scale monitoring technology, deep-seated fluids are collected and analyzed. In the field of production control, technical problems are discussed and information is gathered centering on methods for scale prevention and removal. 31 refs., 90 figs., 40 tabs.

  5. Research and development of utilization technology of solar thermal system for industrial and other use. Development of system of advanced heat process type (chemical refrigeration and cold storage system using solar heat); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Advanced heat process gata system no kaihatsu (taiyonetsu reito reizo no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for chemical refrigeration and cold storage system using solar heat. The study on refrigeration materials are aimed at development of new hydrogen-occluding alloys which show good hydrogenation equilibrium characteristics and reactivity at temperature required for stand-alone refrigeration systems aided by solar heat, and still new hydrogen-occluding alloys operable at refrigeration temperature for lower-temperature systems. For the refrigeration materials capable of producing low-temperature heat of -10{degree}C at a regeneration temperature of 140{degree}C produced by solar heat, a La-Ni-Mn-Al alloy is selected for high-temperature use and a La-Y-Ni-Mn alloy for low-temperature use. The study on technology for refrigeration modules develops high-efficiency heat exchangers for refrigeration and regeneration, compatible with the hydrogen-occluding alloys. It also develops air-and water-cooling techniques for hydrogen-occluding alloys, where air is used as the heat source. The test apparatus is designed, installed and operated, to attain a low temperature of -10{degree}C or lower with a heat source of 140{degree}C and air heat source of 28{degree}C. 7 figs.

  6. FY 2000 report on the results of the regional consortium R and D project - Regional consortium energy R and D field. Third year report. R and D of a working material processing eco system using powder mold-releasing lubricant; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium energy kenkyu kaihatsu bun'ya. Funtai rigata junkatsuzai wo mochiita sokeizai kako eco system no kenkyu kaihatsu (dai 3 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of constructing the industry of processing low cost/low environmental load working materials, the development was proceeded with of a block die type powder mold-releasing system. Studies were made in the following 6 fields: 1) optimization/commercialization of new adhesion/flow methods; 2) optimization/commercialization of new powder mold-releasing lubricant; 3) demonstrative experiment and optimization of an eco die cast system; 4) optimization of a powder mold-releasing forging system; 5) application test on the actual mold-releasing lubricant reduction type system; 6) comprehensive investigational study. In 1), studied were a method to integrate the profile of supply pressure of powder conveying air flow and the basic information on adhesion behavior into the practical process, and optimization of powder supply method and supply device control sequence. In 2), the development was made of a sleeve use high thermal insulation type powder mold-releasing lubricant (composed mostly of Al(OH){sub 3}, graphite and wax). This powder mold-releasing lubricant remarkably improved forging ability of the ultra-thin material with 0.4mm thickness and materials with complex shapes and markedly decreased fracture chills. (NEDO)

  7. FY 1999 report on the results of the R and D project on the venture support regional consortium - small-/medium-sized firm creation base type. R and D of food bacteria inspection use biosensor using recombination plant expression antibody; 1999 nendo chiiki consortium kenkyu kaihatsu jigyo - venture kigyo shiengata chiiki consortium kenkyu kaihatsu jigyo (chusho kigyo sozo kibangata) seika hokokusho. Kumikae shokubutsu hatsugen kotai wo riyoshita shokuhin biseibutsu kensayo bio sensor no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The R and D were conducted with the aim of developing a detection system using antibody as biosensor which senses bacteria causing food poisoning in a short time and in high sensitivity. In the study, antibody genes were acquired from anti-calicivirus monoclonal antibody producing cells, and, based on the gene information obtained, the necessary gene recombination and artificial synthesis were conducted to make the structure adaptable for plant expression. This gene was expressed in the baculovirus system, and the activity was confirmed. As to the development of calicivirus antigen/antibody expression recombination plant, conducted were the making of transformation plant (tobacco) by aglobacteria method and the expression of broad bean by virus vector, and each product was quantified. Concerning the manufacture of food poisoning inspection use biosensor, the technology was developed by which products are highly refined from the antibody/plant extract mixture by a combination of various kinds of chromatography. Further developed was the mark method of the refined antibody, and the basic detection method was completed. (NEDO)

  8. Fiscal 2000 report on result of R and D on robot system cooperating and coexisting with human beings. Development of energy conservation technology; 2000 nendo ningen kyocho kyozongata robot system kenkyu kaihatsu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    Introduction of a number of robots and consumption of a large amount of energy are unavoidable if a complicated process operation is to be carried out by robots in an extensive work site. Great energy conservation is contrived by developing robots applicable to manufacturing in performing a variety of operations in place of human beings and thereby reducing the number of robots to work. This paper explains the fiscal 2000 results. For dual-handed cooperative tasks, a function was examined capable of gripping an object without giving a humanoid robot an instruction of an exact gripping position. A method was designed to prepare a command for the other arm through a command for one arm, with torque impedance control employed for the purpose of avoiding damage due to collision. A study was conducted on a three-dimensional shape detecting model using a visual device of a robot. In grasping problems of balance control of a humanoid robot, the behavior of a robot consisting of multi-links was considered as behavior of inverted pendulum, with possibility checked for the stabilization of the balance. For the purpose of putting the virtual robot platform previously developed to practical use, a three-dimensional operation tool of run-time user interface was developed, with research conducted on the sophistication of robot application. (NEDO)

  9. Achievement report for fiscal 1998 on the research and development of genome informatics technology. Development of energy use rationalization technologies; 1998 nendo genome informatics gijutsu kenkyu kaihatsu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In the field of the analysis of gene expression frequency information, a novel glass coating method and a highly sensitive high-speed reading device are developed. Element technologies are studied for the development of a detection system capable of high-density high-speed reading of high-density DNA capillary array, with a long-chain DNA probe solidified therein. In the technology of transcription control information analysis, concerning the technology of transcription dynamics analysis using tagged transcription control factors, the construction of a model system protocol is studied, an automatic analysis system is developed, and an evaluation technology is also developed. Furthermore, a novel method is proposed, in which two specimens will be prepared, that is, a microbead coupled DNA specimen consisting of base sequences of all combinations of a certain chain length and a cDNA (complementary deoxyribonucleic acid) derived protein specimen, and DNA-protein complexes will be isolated for analysis bead by bead out of a liquid which is a mixture of the said two specimens. (NEDO)

  10. Fiscal 1996 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1996 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `chosentan denshi gijutsu kaihatsu sokushin jigyo`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    For the purpose of establishing ultra high technology of a next next generation level which is a basic technology in the electronic information field, a key to the realization of the high grade information society and a common technology base giving marked influences to the wide range industrial field, the R and D was started of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology to draw pictures on metal and crystal surfaces using ultra short wavelength laser beams, shading system technology of shading mask to be used to the process of drawing ultra high accuracy and complicated figures, ultra high tech plasma reactive measuring/analysis/control technologies which become the base of ultra thin films and ultra fine etching using plasma, ultra high tech cleaning base technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. 137 refs., 358 figs., 38 tabs.

  11. Achievement report for fiscal 1998. Research and development of synergy ceramics (Development of technology for energy use rationalization); 1998 nendo seika hokokusho. Shinaji ceramics no kenkyu kaihatsu (energy shiyo gorika gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim is to create inorganic materials with their functions well harmonized and with their reliability remarkably improved, and efforts are made to establish basic technologies with which structural control may be carried out simultaneously for multiple layers in in-process products through positive utilization of various chemical reactions in the materials synthesizing process. This fiscal year's achievements are stated below. A low-temperature pressure nitriding method is developed in which nitriding reaction directly involves the metal aluminum compact for conversion into ceramics, and an aluminum sintered body is produced capable of high thermal conduction of not less than 170w/mk with the original compact shape retained. By a heat treatment in a high-temperature pressure nitriding atmosphere, a success is attained in producing a silicon nitride ceramic body enhanced (150w/mk) in thermal conduction. It is clarified that the microwave-aided selective heating technology works effectively in enhancing the particle growth rate in a liquid-phase sinter system, and a success is won in increasing strength by virtue of the formation of particle-growing particles. (NEDO)

  12. Research on natural gas fuel injection system. Development of high-performance pressure regulator; Tennen gas yo nenryo funsha system no kenkyu kaihatsu. 1. Tennen gas nenryo funshayo no koseino regulator kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kato, S.; Ishii, M.; Takigawa, B.; Makabe, K.; Harada, S.; Ono, H. [Nippon Carburetor Co. Ltd., Tokyo (Japan)

    1997-10-01

    With the aim of further reducing the exhaust emissions of natural-gas vehicles, vigorous research and development work is under way today on multi point gas injection (MPGI) system. In this studies, a high-performance pressure regulator, which is one of the main components of this MPGI system, has been newly developed. The results showed that a significantly better accuracy of the regulated pressure level using this regulator was obtained under the wide range of operating conditions, including instantaneously greater changes of fuel flow rate. In addition, the advanced studies of gaseous fuel injectors (GFIs) would be also conducted. 4 refs., 8 figs.

  13. FY 1998 result report. Research/development on the energy overall development/utilization technology of gas hydrate resource; 1998 nendo seika hokokusho. Gas haidoreto shigen no energy sogo kaihatsu riyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This study is aimed at studying for survey of gas hydrate (GH) deposit required for GH resource development and gathering of it, and further at studying for industrial utilization technology development of GH which is different in formation condition depending on kind of gas with which it reacts. The results of FY 1998 are as follows. In the study of the situation of existence of gas hydrate in the tundra, the sedimentary environment of the tundra where natural gas hydrate exists was simulated in laboratory to measure thermal conductivity of the sediments including GH. In this fiscal year, design/fabrication/calibration were conducted of the GH synthesizer and thermal analyzer. In the study of GH gathering technology in the tundra, a technology is discussed for recovering gas from GH layer and at the same time substituting CO2 hydrate for GH by blowing CO2 into the geologic layer. In FY 1998, formation/dissociation behaviors were first studied of methane/CO2 mixture hydrate. For the overall energy development of GH resource and promotion of R and D of the utilization technology, studies were made on physical properties of GH and development of the usage. (NEDO)

  14. Fiscal 1997 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1997 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `Chosentan denshi gijutsu kaihatsu sokushin jigyo`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    For the purpose of establishing ultra high technology of a next next generation level, the R and D was conducted of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology, ultra high accuracy shading system technology, ultra high tech plasma reactive measuring/analysis/control technology, ultra high tech cleaning basic technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. This R and D is a greatly influential basic research in the whole industrial field, and therefore, it is necessary that researchers standing foremost in each field of industry/university/government join the project and that various R and D infrastructures are made the most of. For this, the concentrated joint research method and the dispersed joint research method are combined, and the R and D is being conduced by equal partnership of each researcher. 421 refs., 823 figs., 91 tabs.

  15. Fiscal 1997 international cooperation project. Report on the results of the research on environmental harmony type combustion technology; 1997 nendo kokusai kenkyu kyoryoku jigyo. Kankyo chowagata nensho gijutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Out of the R and D on the environmental harmony type combustion technology, the results of the project carried out in fiscal 1997 were summed up. In the site survey, etc., visits were paid to France, Spain, Greek, Germany, the U.K. and the U.S. to have discussions and examine the trend of research on the NOx removal catalyst and catalyst combustion. In the actual R and D, the R and D were conducted on zeolite base NOx removal catalyst, oxide composite base NOx removal catalyst, alumina base NOx removal catalyst, direct decomposition type NOx removal catalyst, catalyst combustion, etc. In the R and D of the catalyst combustion, durability under high gas flow flux was examined of PdO-Pt/Ba-Al203 catalyst developed for low temperature use, which indicated that durability and low temperature activity were heightened. As high temperature use catalyst, high temperature durability was examined of the developed Pd0-La/Gd-ZrO2 catalyst, which showed that the durability was favorable. 322 refs., 261 figs., 55 tabs.

  16. Achievement report for fiscal 1998. Leading research and development of MGC-built superhigh-efficiency turbine system technology; 1998 nendo MGC chokokoritsu turbine system gijutsu sendo kenkyu kaihatsu kenkyu seika

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    To further enhance energy efficiency by improving on the gas turbine system, it is necessary, first of all, to develop superhigh-temperature materials to allow the system to operate at higher temperatures. Described in this report are studies on the application of MGC (melt-growth composite) materials which retain strength and plastic deformation capability even at high temperatures. Various compositions are explored for improvement on fracture toughness and thermal shock resistance. The Al{sub 2}O{sub 3}/YAG system is investigated for the study of relations between microstructural control and fracture toughness. Literature on the development of nanocomposites is surveyed, and a preliminary experiment is discussed for improvement on purity by zone melting crystallization. In a study for an advanced manufacture of larger crystals, technologies of crystal growth condition setting and optimization, quality stabilization, productivity improvement, and crystal size enlargement are taken up. Casting and machining technologies are studied to enable crystals to assume complicated shapes. For the purpose of elucidating the mechanism of the occurrence of properties proper to high temperatures, a study is made on the evaluation of mechanical and physical properties and on the mechanism and control of crystal growth. Also studied are systems (gas turbine cycle, combustor, etc.) to which MGC materials may be applied. (NEDO)

  17. R and D of a house total system. Research on new functions and improvement of controllability of the regenerative air-heater; Jutaku total sytem no kenkyu kaihatsu. Chikunetsu danboki no aratana kino oyobi seigyosei no kojo kenkyu.

    Energy Technology Data Exchange (ETDEWEB)

    Inaba, S.; Takeyama, S. [Hokkaido Electric Power Co. Inc., Sapporo (Japan)

    1995-06-14

    Research was made on new functions and control of the already developed regenerative air-heater to maintain a more comfortable air-heated environment through the further improvement in method to use it. In the regenerative air-heater, the night power of low cost in the electric rate schedule is stored as thermal energy in its internal regenerative refractories, and when necessary, taken out to heat the air. To improve the switching operation for it, eight different switches were made selectable to set the initial condition. Released against the quantitative shortage of stored heat, its function of continuous operation was automated by putting the heating conditions in order. As measures against the absence, the house was prevented from cooling as a whole by continuing the air-heating operation at low temperatures. The air-heating operation was made controllable by three ways with a telecontrol system connected through the communication line. Also applied to decrease the deviation in room temperature, the fuzzy control could do the conventional deviation of {plus_minus}1{degree}C to within {plus_minus}0.5{degree}C with the fan noise abated. 3 refs., 10 figs., 5 tabs.

  18. Fiscal 1998 R and D report on human feeling measurement application technology. Part 2. Main report (2); 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 2. Honronhen (2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report reports case studies on human feeling measurement (physiological index (A), environmental adaptability index (B)) application technology, and product adaptability evaluation technology. In fiscal 1998, a real living simulation experiment was conducted in addition to an integration and verification experiment of indices. As for (A) such as stress, fatigue and stimulus, the composition for every integrated index, verification of its effectiveness under real environment, and the effect of environmental factors on it were studied to improve prediction accuracies, and compose index groups corresponding to various work environments. As for (B), adaptive feeling and fatigue feeling under visual, noisy and thermal environments, its effect on work results, and rest comfortability were studied, and an index formula for predicting subjective evaluation quantities from physical properties was prepared. In the simulation, an operability of monitoring works, the relation between a product index and (A), a lighting effect on night works, bathing and ununiform thermal environment were evaluated. The effect of (A) in real living, and an application guidance were also clarified. The result was adopted for a human feeling manual and database model. (NEDO)

  19. FY 1997 research and development of fusion domains. Part 3. Studies on next generation optical substrate technologies; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 3. Jisedai hikari kiban gijutsu no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    With an objective of realizing super large capacity recording technologies largely exceeding the current limits of optical recording and magnetic recording, studies were conducted on application of near-field optics. In the study on recording by using near-field light, it was verified that a mark with approximately the same size as an aperture diameter can be formed on a phase change recording film when a fiber probe with an aperture diameter of about 200 nm is used. However, it was found that the recording using this system takes excessive amount of time. When laser light collected on an objective lens was irradiated pulse-wise, a mark with a minimum width of about 20 nm was observed with high contrast. This will mean that a record with recording density of one terabit/in {sup 2} can be read out. Other studies performed include those on evaluation of effects of polarized light and surface shape on near-field read-out, simulation, mechanism of crystallization in a phase change recording film, recording and playback with ultra-high resolution by using a conformable near-field aperture, fabrication of a flat aperture type near-field light probe array, and the evaluation thereon. 22 refs., 27 figs.

  20. Fiscal 1998 R and D report on human feeling measurement application technology. Pt. 1. Outline; 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report outlines the fiscal 1998 R and D result on human feeling measurement application technology. For development of assessment technology of the impact of work fatigue on human feeling (human feeling index), and assessment technology of the adaptability and affinity between human being and environment or product (environment and product adaptability index), data storage and evaluation by measuring experiment of human feeling, and modification of every index toward the final index based on the above data were carried out. Further case studies were carried out to reflect the above both indices to design of living products or residence and office environments, and new data were also collected. The database model for using previously collected human feeling data effectively, and the sweating manikin for estimating human thermal feeling reasonably were developed. In addition, the human feeling measurement manual was prepared to diffuse these technologies. The R and D system is also described. (NEDO)

  1. Fiscal 1997 report on the R and D under consignment from NEDO on human sensory measurement application technology; 1997 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper outlined the result of the fiscal 1997 R and D on `human sensory measurement application technology (HSMAT)` which entered into the second stage. As to the R and D of technology for development of human sensory indices, examples for developing human sensory indices were set up for the following each technology to be developed, and measuring experiments were conducted: technology to assess the effect on physiological senses such as fatigue and awakening, technology to assess human adaptability to various environmental conditions, and technology to assess adaptability of products to humans from a viewpoint of affinity, etc. In relation to the R and D of technology for practical application of human sensory indices, a study was conducted of application examples for using each index to the design of daily products and residential/working environments, and at the same time a prototype database of human sensory data was trially made using part of the experimental data. Moreover, for clothes and working environment to feel better, design/assembly were conducted of a hand/leg movable and sit-on-chair manikin which enables rational estimation of thermal sense of humans. 82 refs., 391 figs., 88 tabs.

  2. FY 1996 Report on the research and development project for interdisciplinary area. Part.2. Research on bionic designs; 1996 nendo yugo ryoiki kenkyu kaihatsu. 2. Bionic design ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The objects of this project are to elucidate the self-organization mechanisms of a living body, e.g., functional adaptation to environments and self-restoration, to utilize the molecular interactions in a living body, and thereby to establish the basic technologies for developing molecular motor functions, e.g., artificial organs. Described herein are the FY 1996 results. For creation of living soft tissues, N-ePTFE and Gf are found to be good base materials for cell growth in the serum-free culture, and may be applicable to bio-reactors. Sugar-bound high-molecular-weight compounds and artificial hyaloid body are created. For hard tissue materials, e.g., artificial articulation, the macrophage is activated by englobing worn debris of polyethylene, to activate the broken bone cells that absorb the bone, causing the artificial articulation to become loose. For researches on molecular motor mechanisms, it is considered that myosin changes the head morphology to give a driving force to the muscle, and this concept is studied in detail. The photosynthesizing protein is a molecule related to light and electricity, and is useful as the material to apply the living functions to industrial technologies. The technologies for assembling molecules are studied by utilizing the self-organization functions of living molecules. Development of other molecular machines is also attempted. (NEDO)

  3. Research and development of peripheral technology for photovoltaic power systems. Meteorological analysis for suitable design of photovoltaic power generation systems; Shuhen gijutsu no kenkyu kaihatsu. Saiteki sekkei no tame no kisho data no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the standard weather data necessary for simulation of PV power generation systems in fiscal 1994. In the study on the selection criterion of the standard weather data from the viewpoint of PV power generation systems, three typical years are used; a year with average solar radiation, and two years with extremely less and more solar radiation for safe simulation. The standard weather data are arranged for output calculation of PV power generation systems by selecting the most typical year based on long-term observation data. The data to be arranged are as follows; total, direct and scattered solar radiations incident upon a horizontal surface, solar radiation upon a slope surface, sunshine duration, air temperature, wind direction, wind velocity, amount of precipitation, and snow depth. For arrangement of the nationwide standard weather data, estimation of total solar radiation is necessary based on sunshine duration data observed by all weather bureaus. In this study, the estimation model was developed of the total solar radiation integrated with time from rotary pyrheliometer data. 5 figs.

  4. Research and development of photovoltaic power system. Study on structural defects in silicon-based amorphous materials; Taiyoko hatsuden system no kenkyu kaihatsu. Amorphous silicon kei zairyo no kozo kekkan ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, T. [Kanazawa University, Ishikawa (Japan). Faculty of Engineering

    1994-12-01

    Described herein are the results of the FY1994 research program for structural defects of silicon-based amorphous materials for solar cells. The study on light generation defects of the a-Si:H system and rejuvenation process by annealing establishes the effects of light irradiation time on changed neutral dangling bond density as a result of light irradiation at varying temperature of 77K, room temperature and 393K. The study on annealing to rejuvenate light generation defects of various types of a-Si-H systems establishes the activation energy distribution with respect to annealing to remove light-induced defects, showing that hydrogen affects the distribution of light-induced defects. The study on decaying process of light-induced ESR for undoped and N-doped a-Si:H systems observes the decaying process of light-induced ESR, after light is cut off, extending for a period of several seconds to several hours at 77K for the a-Si-H systems containing N in a range from 0 to 12at%. The other results presented are space distribution of neutral defects of light-irradiated a-Si-H systems, and rejuvenation process of light-induced spin for the a-Si(1-x)N(x):H composition. 6 figs.

  5. Research and development of system to utilize photovoltaic energy. Study on large-scale PV power supply system; Taiyoko hatsuden riyo system no kenkyu kaihatsu. Taiyo energy kyokyu system no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on large-scale PV power supply systems in fiscal 1994. (1) On optimization of large-scale systems, the conceptual design of the model system was carried out which supposes a large-scale integrated PV power generation system in desert area. As a result, a pair of 250kW generation system was designed as minimum one consisting power unit. Its frame and construction method were designed considering weather conditions in the inland of China. (2) On optimization of large-scale transmission systems, as large-scale power transmission systems for PV power generation, the following were studied: AC aerial transmission, DC aerial transmission, superconducting transmission, hydrogen gas pipeline, and LH2 tanker transport. (3) On the influence of large-scale systems, it was estimated that emission control is expected by substituting PV power generation for coal fired power generation, the negative influence on natural environment cannot be supposed, and the favorable economic effect is expected as influence on social environment. 4 tabs.

  6. Research and development of system to utilize photovoltaic energy. Survey on system and peripheral technologies for utilization of photovoltaic power; Taiyoko hatsuden riyo system no kenkyu kaihatsu. Riyo system ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the survey results on systems and peripheral technologies for use of PV power in fiscal 1994. On the case study of PV communities, as housing zone PV community, Seibu Kitanodai housing estate mainly composed of detached houses, and the Suwa area of Tama New Town of apartment houses were selected to study PV power generation on a roof, wall and window. The result clarified that generated energy of a detached house reaches 3-4 times as much as consumed one, that of an apartment house is nearly equal to consumed one, and power generation of nearly 380MW is possible based on expected housing supply until 2000. As urban core zone PV community, the survey result on Ebisu Garden Place clarified that the expected PV power supply rate is 10% or more, 20% and 30% or more for hotel and office buildings, high-rise apartment building more than 30 stories, and medium-rise one of 10 and several stories, respectively. In Sakura industrial estate, the maximum generated power was nearly equal to consumed power in a weekday, and as inverse power flow in a holiday was considered, the annual PV power supply rate was extremely high.

  7. Research and development of system to utilize photovoltaic energy. Survey on the evaluation of photovoltaic power generation; Taiyoko hatsuden riyo system no kenkyu kaihatsu. Taiyoko hatsuden hyoka no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the survey results on evaluation of PV power generation in fiscal 1994. (1) On the evaluation technique of energy pay-back time, foreign trial calculation examples by integration method were surveyed. However, there were not many study examples, and the calculation basis of input energy was also ambiguous. The calculation result by input-output analysis in Japan gave the value more than that by integration method, pointing out that indirect input energy is essential. (2) On the evaluation technique of the degree of environmental contribution, CO2 emission of the PV generation system installed on ordinary housing roofs was calculated to estimate reduction of CO2 emission and cost. As a result, PV power generation as reduction measures against CO2 brought a little cost increase. (3) On the latent scale of PV power generation, it was estimated to be nearly 191GW although under no restriction. It was a considerably large value as compared with the current power generation capacity in Japan. 4 tabs.

  8. Fiscal 1997 report on the R and D result of industrial science and technology. R and D on super metal (R and D on innovative raw metal materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku seika hokokusho. Super metal no gijutsu kaihatsu (kakushinteki kinzoku sokei zairyo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Study was made on the applicability of mechanical milling (MM) and mechanical alloying (MA) to Fe system alloys. Metastable austenitic stainless steels such as SUS316L and SUS304L form {alpha} phases by strain induced transformation due to MM, and are subjected to further plastic deformation. Nano-size fine structure was obtained through inverse transformation into austenite({gamma}) by heat treatment or high-temperature sintering of MM powder. Fine microduplex structure of 620nm in average crystal grain size was obtained for SUS316L. This material showed nearly 3.3 times higher 0.2% tensile proof stress, nearly 1.8 times higher tensile strength, and 35% higher elongation than conventional ingot steels. Solid solution powder of 12Cr-Mo-W ferritic steel was sintered by hot isostatic pressing (HIP) under low- temperature and ultrahigh-pressure conditions of 650degC and 588MPa. The as-HIP`ed sample and sample annealed at 800degC showed average {alpha} grain sizes of 33 and 50nm, respectively, and a strength twice as high as that of 12Cr steel. 97 refs., 60 figs., 18 tabs.

  9. Research report of FY 1997 on the industrial science and technology development. Technology development of super-metal (technology development of nano-amorphous structural control materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku seika hokokusho. Super metal no gijutsu kaihatsu (nano-amorphous kozo seigyo zairyo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research and development of the innovative metals have been conducted, by which the weight reduction of members can be done by drastically improving the strength compared with conventional metals. For the high-rate cluster deposition and super plastic forming technologies, research and development of aluminum-based light-weight materials have been conducted, which provides excellent strength, toughness, and super plastic formability at room temperature. For the high-density energy utilization and control technology (amorphous-A), super-metals have been investigated as high dew point and corrosion resistance materials used for waste incinerators operated under the very severe conditions. These are expected to be applied to the apparatuses and equipment due to their excellent properties. For the controlled cooling technology (amorphous-B), super-metals with excellent soft magnetic characteristics and degree of shape freedom have been investigated for high performance and high efficiency devices including electric/electronic/communication devices, power transmission devices, and various industrial devices and parts. These are expected to contribute to the creation of new markets and the improvement of international competitive force. 123 refs., 160 figs., 33 tabs.

  10. Research cooperation in the development of laser radar for environmental measurements. Environmental network; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku. Kankyo network

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Among the research cooperation in the development of laser radar for environmental measurements with Indonesia between FY 1993 and FY 1996, results of the research and development of the environmental network are summarized. For the environmental information network, the Tokyo NOC is linked as an Internet connection point in Japan with the Jakarta NOC using an international dedicated line with a capacity of 64 Kbps. The Tokyo NOC is linked with domestic environmental information researchers using Internet. Thus, data stored in the data processing system of laser radar can be exchanged, information in both countries can be exchanged using E-mail, and data can be accumulated. For the research cooperation with Indonesia, research of path control and information relay server, research of effective transmission of data on the network, and research of multimedia communication have been conducted. The multimedia communication, distributed processing, and extension of dedicated line network using PPTP have been also conducted. 39 figs., 4 tabs.

  11. Fiscal 1997 report on the results of the international standardization R and D. Robot control system; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Robot seigyo system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    R and D of the robot control system was conducted in the following items: 1) integrated open control system, 2) remote control robot manipulation language, 3) human factor robot use built-in LAN system, 4) built-in actuator driver. In 1), there were some problems to be pointed out around the system, but the effectiveness was confirmed as system architecture of each verification item. In 2), development/design were made of RCML(R-Cube Manipulation Language) as a remote robot manipulation language, telecommunication protocol, and the experimental system, and the international standardization was targeted. In 3), the R and D was conducted of the realtime telecommunication protocol which clears the standards for the distributed control required for construction of human factor robot and the advanced realtime micro-controller, ULSI, which is the one that the protocol was made IC. In 4), an intelligent connector for built-in actuator was developed which enables saving of wiring in robot system and plug-in connection. 13 refs., 186 figs., 53 tabs.

  12. Report on achievements in fiscal 1998. Research and development of a welfare techno-system; 1998 nendo welfare techno system kenkyu kaihatsu (Sapporo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The surveys and studies having been performed in the present fiscal year are as follows: (1) in the surveys and studies on self-reliant and at-home care-taking for elderly people living in residential houses, using biological information of snowy and cold districts as the parameters, (a) effect of changing the attitude in two-step ascent and descent motions was studied, (b) stair ascent and descent motions were analyzed, (c) standing-up motion using a sitting position handrail was analyzed, and (d) stride-over motion patterns and hip joint movements were experimented; (2) in the studies of a living environment system to support self-reliant way of living of elderly and physically handicapped people in snowy and cold districts, studies were made on (a) shapes of entrance and exit spaces of a residential house, and features of moving motions of elderly and physically handicapped people, (b) living activity patterns and pleasantness centering around the living section in the house of the at-home elderly people, (c) forms of approach spaces for independent residential houses that consider snow disposal: (3) in development and improvement of care-taking devices with importance placed on physical and psychological adapting function of the users and harmony with the users, studies were given on (a) noise characteristics of rooms in which at-home welfare devices are installed, (b) colors and recognizability of switches on welfare devices for elderly persons, (c) drive experiments of moving devices in winter, and (d) motion simulation of ridable devices; and studies were made on (4) moving and riding welfare device systems for elderly and physically handicapped people in snowy and cold districts, and (5) user interface of motor-driven wheelchairs. (NEDO)

  13. Achievement report on research and development on fusion zones in fiscal 1999. Second volume. Chemo-intelligence; 1999 nendo yugo ryoiki kenkyu kaihatsu seika hokokusho. 2. Kemo intelligence

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an objective to artificially realize diverse functions and structures using as a trigger the molecule recognition in living things and organisms, researches and surveys were performed on chemo-intelligence. This paper reports the achievements in fiscal 1999. In a theoretical approach to elucidate inter-molecular interactions, research was performed on hydrogen bondage, CH-{pi} interactions and stacking by using the computerized chemical method. In the design and synthesis of host molecules, development was carried out on a synthesizing method based on large ring compounds and non-ring compounds utilizing the interactions having weak hydrogen bondage, and molecular design utilizing the conformity in sizes and shapes of the molecules. In structuring the host molecules having a function to recognize neutral molecules, research was executed on capturing and activation of neutral organic molecules as the artificial host molecules. In addition, investigations were given on the latest information about separation of ionic substance recognizing compounds and their application to sensing, structure of ultra-molecular construction and the function thereof, and approaches aimed at their use as materials and applications. (NEDO)

  14. Research and development cooperation project on environmental measurement using laser radar in fiscal 1995 (environmental network); Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku (kankyo network)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    As a part of the cooperative work with Indonesia of R and D of a laser radar for environmental measurement, the paper described the development of an environmental network. The field survey was conducted in April, July and December 1995 and in March 1996. For the investigational research, five meetings of the committee and four times of group work were held. The Asian environmental network was studied in terms of its arrangement, operation and management, and the overall network/path control design were being prepared. To make the persons concerned abroad and in Japan understood the APEC Osaka Conference held in November 1995, a homepage APEC `95 Kansai was opened using WWW (World Wide Web, a decentralized hyper media system which can dispatch information to the whole world by network using hyper text). Moreover, in connection with this, a homepage was opened of CICC (Center of the International Cooperation for Computerization, a center controlling the whole Asian environmental information network system where E-mail and data are exchangeable with Indonesia via Tokyo NOC (Network Operation Center)). 49 figs., 8 tabs.

  15. Development of an observation robot `Flying Fish` for comprehensive measurements of ocean environment; Kaiyo kankyo sogo kansoku robot `flying fish` no kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Koterayama, W.; Yamaguchi, S.; Nakamura, M. [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics; Akamatsu, T. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan)

    1996-12-31

    With an objective for spatial continuous measurement of physical, chemical and biological amounts in ocean, development has been made on a wing controlled towed vehicle, `Flying Fish` which is capable of controlling depth, pitch and roll. Numerical simulations and two-year sea experiments have been carried out for the development. Flying Fish consists of a sub-system comprising a towing vehicle, towing cables, and on-board controllers. In a steady state, Flying Fish can be controlled at accuracy for depth of {plus_minus} 0.05m, pitch of {plus_minus} one degree, and roll of {plus_minus} 0.5 degree. This accuracy is sufficient for operating a chemical analyzer, the dissolved carbonic acid analyzer. Even in a non-steady state such as in changing the depth, the pitch can be controlled at {plus_minus} 3 degrees and the roll at {plus_minus} 0.5 degree. This extent of attitude change is within a range rendering no problems in maintaining accuracy of the measurement devices. The result of sea experiments for movements of Flying Fish agreed with that of the numerical simulation at practically usable accuracy. Flying Fish is verified as an effective system in investigating spatial variations in ocean data. 10 refs., 15 figs., 1 tab.

  16. FY 1998 report of the results of the R and D of human media; 1998 nendo human media no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In the light of the trial design/manufacture made in the previous fiscal year, the following were conducted in this R and D: design/manufacture of a system to support the combinedly complete design of designer, contemplation of a system to instantly search the necessary images without keyword input, joint design of urban environment after completion of urban redevelopment by virtual reality technology, design/manufacture of a system by which many people can feel reality, and manufacture of a system to enable evaluation of disaster prevention by a model of urban planning design. Further, carried out were exchanges of technology information and survey on the trend of domestic/overseas technology. In the R and D of the Kansei agent and human media database, pre-prototyping of the integrated system was conducted. By this, an image was materialized for realization of an industrial design support system including sensible information and multimedia contents using database. In the R and D of urban environment human media, the following were conducted: design/evaluation support for design including buildings and the whole urban environment; primary development of individual technology by which many people can virtually experience simultaneously landscape, wind environment, refuge behavior at the time of disaster, etc. (NEDO)

  17. Project to promote the technical development of global environmental industries. International research exchange project; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kokusai kenkyu koryu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Exchanges with researchers/research institutes in overseas countries have an important meaning in promoting the research and development toward the creation of new research fields where the solution to the environmental problem is aimed at and toward the construction of new technological systems. Therefore, under the cooperation of Research Institute of Innovative Technology for the Earth (RITE), and RITE related researchers and societies, given were invitation and dispatch of researchers to international conferences and symposia involved in the global environment related technology, and exchanges with major overseas research institutes/universities. At the same time, based on the short-term invitation and dispatch so far given, a system was established for medium- and long-term dispatch/invitation of researchers who are thought to hold an important position in the future research activities. From the results obtained, domestic and foreign exchanges relating to the latest research could be promoted. In addition, researches in the basic domain related to the global environmental technology were advanced in a variety of fields overseas. The numbers of invitation and dispatch given in fiscal 1995 were 12 and 13, respectively, the results of which were included in this paper. 121 refs., 74 figs., 11 tabs.

  18. Research and development cooperation project on environmental measurement using laser radar in fiscal 1994; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The paper outlined activities in fiscal 1994 in the R and D cooperation project on a laser radar for environmental measurement. In the activities in fiscal 1994 of `the ODA laser radar development committee,` the committee held four meetings, two field surveys were carried out, and two researchers were invited from Indonesia. In the field survey, the environment in Jakarta city was investigated in terms of changes in population and number of the cars registered. Further, from data collected during 1994-1998 in the central Jakarta city, the following were made clear: the trend of a decrease in SO2, the trend of a rapid increase and an excess of NO2 content over the environmental standard, the status of pollution of which the level is close to the upper limit of the environmental standard of dust, etc. In the meeting of the policy study for the field survey at LIPI headquarters, Japan proposed a system which is constituted of a difference absorption laser radar, two Mie scattering laser radars, and a central processing unit. The sites proposed were studied in cooperation with Indonesia. 40 refs., 65 figs., 9 tabs.

  19. Fiscal 1997 report on the results of the international standardization R and D. Overall survey; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Sogo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper summed up the results of the survey of tackling with the international standardization by enterprises and organizations involved in the standardization in the U.S., Europe and Japan, the results of the R and D on 20 themes for the international standardization, and the development toward the international standardization. As the R and D themes, the following were selected: the development of chemical method to analyze/evaluate metallic coatings of surface treated steel coating sheets, R and D of the basic evaluation method of functional composite particles, international standards for computer/manikins, basic technology of color image management, study on optimizing design/evaluation technology using quality engineering, study of the international standardization by economic evaluation of environmental impacts, R and D of the standardization of a method to test acceleration life of phosphorous acid fuel cells, development of a test method of halogen-free flame-retardant cables and a study of the cable standards, standard measuring methods of hormone effects of chemical substances, quantification of the sensory evaluation and international standardization in the paint field, experimental study on the international standardization for immunochemical measurement of chemical substances, etc. 24 figs., 16 tabs.

  20. Achievement report on research and development of medical and welfare equipment technology. Comprehensive wheelchair supporting system; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Kurumaisu sogo shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    A comprehensive wheelchair supporting system is developed, which is a combination of a system for supporting the prescription, design, and manufacture of a wheelchair and a system for supporting the movement of the wheelchair. In the development of a motorchair prescription supporting system, a database is constructed containing wheelchair prescription experts' know-how and decision-making criteria, and their prescriptions are standardized. Since the motorchair users are heavily handicapped, an expert system is constructed on the basis of 14 types of basic wheelchairs. A design/manufacture assisting system is developed, which automatedly works out, using data collected in the prescription assisting process, a side view, rear view, and drawings for all parts that are required for the manufacture of a wheelchair. In the development of the movement supporting system, a wheelchair structure is developed, which allows a user to operate the wheelchair unaided in climbing a stairway or stepped passage. In the development of safety devices, a right angle approach automatic control mechanism, askew drive stop mechanism, emergency stop mechanism, start and stop mechanism, auxiliary system to respond upon receiving guidance signals from the wall, and a fastening device are now complete. (NEDO)

  1. Research and development cooperation project on environmental measurement using laser radar (environmental network) in fiscal 1993; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku (kankyo network)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    For the purpose of contributing to the research cooperation project on the development of a laser radar for environmental measurement, the paper surveyed the present and future trend of the environment related information network in Indonesia. The survey was conducted in terms of a name of the network, the main administration body, the number of users, the utilization status, the use protocol, details of service, domestic mode installation sites and the main administration body, accounting system, types of the network used, reliability and stability of network, limitations on the use and details of the limitation, etc. The plan for expanding telecommunication equipment is being advanced in a very quick tempo. However, there are many problems in digitalization, and it is feared that the plan will be delayed. As to telecommunication quality and connection quality, the telecommunication completion rate, SCR, is very low, approximately 24% on average, which is equal to that around 1990 in Japan. The business service for users is all bureaucratic since they have a lot of applications for the installation piling up with no exception to the rule of developing countries. 23 figs., 10 tabs.

  2. FY1995 study of low power LSI design automation software with parallel processing; 1995 nendo heiretsu shori wo katsuyoshita shodenryoku LSI muke sekkei jidoka software no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The needs for low power LSIs have rapidly increased recently. For the low power LSI development, not only new circuit technologies but also new design automation tools supporting the new technologies are indispensable. The purpose of this project is to develop a new design automation software, which is able to design new digital LSIs with much lower power than that of conventional CMOS LSIs. A new design automation software for very low power LSIs has been developed targeting the pass-transistor logic SPL, a dedicated low power circuit technology. The software includes a logic synthesis function for pass-transistor-based macrocells and a macrocell placement function. Several new algorithms have been developed for the software, e.g. BDD construction. Some of them are designed and implemented for parallel processing in order to reduce the processing time. The logic synthesis function was tested on a set of benchmarks and finally applied to a low power CPU design. The designed 8-bit CPU was fully compatible with Zilog Z-80. The power dissipation of the CPU was compared with that of commercial CMOS Z-80. At most 82% of power of CMOS was reduced by the new CPU. On the other hand, parallel processing speed up was measured on the macrocell placement function. 34 folds speed up was realized. (NEDO)

  3. Study of highly efficient power generation system based on chemical-looping combustion; Chemical loop nenshoho ni yoru kokoritsu hatsuden system no kaihatsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Ishida, S.; Suzuki, T.; Yamamoto, M. [Tokyo Institute of Technology, Tokyo (Japan). Research Laboratory of Resources Utilization

    1997-02-01

    This paper describes the research and development of power generation system by means of chemical-looping combustion. For this system, fuel flows in a reduction reactor and air flows in an oxidation reactor. These two flows are separated. As a result, recovery of CO2 without energy consumption, drastic improvement of power generation efficiency, and suppression of NOx emission are expected. To realize the above, two promising candidates, NiCoO2/YSZ and NiO2/NiAl2O4, have been found as recycle solid particles between the both reactors. These have excellent oxidation/reduction cycle characteristics. By these particles as well as the existing particle, NiO/YSZ, practical application of the chemical-looping combustion is realized. Besides LNG, coal and hydrogen were considered as fuels. When using coal or hydrogen, it was found that temperature of the reduction reactor should be increased the same as that of the oxidation reactor. This is a different point from a case using LNG as a fuel. 5 refs., 2 figs.

  4. Achievement report for fiscal 1998 on Welfare Technosystem Shiga research and development; 1998 nendo Walfare technosystem kenkyu kaihatsu (Shiga) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For people of advanced age in a Japanese style room, the act of standing up is difficult to perform, when they are forced to make use of desks and chairs to hold themselves. In the bathroom and toilet, they often hold on handrails, stool seats, or racks modified to answer the purpose. A device is experimentally manufactured to reduce the burden on the knees when walking on the staircase. Although the device is effective in decreasing the need of muscular activity for knee extension, yet it makes knee bending difficult in some cases thanks to its employment of springs. It is necessary to adjust the sliding mechanism for each person. The difficulty is greater when climbing the stairs. A chronological study is made about changes in everyday behavior due to aging. Chairs are experimentally built, designed to serve as a support during kitchen work. Prototype No. 3 may be put to practical use though its details still want some improvement. To encourage the presence in society of aged people, a portable digital biosignal measuring device is experimentally built, which is to constitute the core of long-term health monitoring systems, and is tested for basic performance. Development has started of a wire-suspended movement assisting system to help aged people move and transfer in conventional type houses. (NEDO)

  5. Report on the results of `the R and D of industrial technology information base arrangement`; `Sangyo gijutsu joho kiban seibi kenkyu kaihatsu` seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In relation to information processing in the open type research information networking, R and D were conducted to establish basic technologies such as grading-up, acceleration, enhancement of efficiency, diversification of application, promotion of usable data accumulation, etc. As to the R and D of software to promote sharing of research information, software was developed which can easily modify and renew management objects for users at research sites, etc., and the target was almost achieved. Concerning the R and D of information supply technology, an approach was presented whereby clients submit bids for each stream of the data requested and the admission decision is made so as to maximize gain of the session under network capacity constraints. Additionally, the R and D were made of software to construct an international information sharing system, a system for multi-lingual I/O, text manipulation and communication, and software for remote use of network based information for scientific computing. 138 refs., 125 figs., 33 tabs.

  6. Research and development cooperation project on environmental measurement using laser radar in fiscal 1993; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    As one of the international research cooperation projects, the research cooperation in developing laser radar for environment measurement started between Japan and Indonesia. The project is scheduled to be carried out in a 4-year plan starting fiscal 1993. In fiscal 1993, conducted were negotiations with Indonesia on its implementation and a field survey. Between January 6 and 15, 1994, the first field survey was made in terms of topography, climate, road network and traffic situation of Jakarta city, and the proposed sites for installation were reported. The paper also introduced the reception system on the Indonesian side and a request for technical learning through stay in Japan. The second field survey was conducted between February 27 and March 6, 1994. Indonesia requested that they want to make laser radar observation not only for the local area, but the one that covers industrial areas, central urban areas and residential areas. Incidentally, there was an opinion that it is important to elucidate the pollution mechanism. 19 refs., 43 figs., 6 tabs.

  7. Investigational study on the development, production and wide spread of welfare apparatus in north Europe; Hokuo ni okeru fukushi yogu no kaihatsu seisan fukyu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of grasping the present situation of the development/production/spread of welfare apparatus in north Europe, an investigation was conducted paying visits to Sweden and Denmark. Basically in the Swedish policy for handicapped persons, disablement is defined not only as features which belong to each individual, but as problems arising when the environment surrounding each individual touches one another. Moreover, characteristics of their policies on welfare apparatus are that major welfare apparatus can be provided for the disabled free of charge, and that the government and public organs play a major role in each step of the development, evaluation, distribution and provision of welfare apparatus. Features of the market of welfare apparatus are that users and buyers of the apparatus are different persons, that a public corporation called SUB participates in determining selling prices, etc., and that the market reflects needs and requests from users comparatively naturally. The needs for welfare apparatus at the Research Institute of Handicapped Persons are grasped through opinion exchanges with groups of handicapped persons or information exchanges with the technical aid center. 3 refs., 11 figs., 10 tabs.

  8. Report on the FY 1999 R and D survey on ultra-high sensitive photoelectric converter; 1999 nendo chokokando koden henkan soshi ni kansuru kenkyu kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    By the ICB method which is one of the ion engineering methods, photomultipliers were formed using organic dye thin films. By changing the energy to bond traps on thin film/metal electrode interface and electric charges by change of acceleration energy of ion beams, a technology was developed for adjusting the optimum operating temperature between -20 degrees C and +100 degrees C. The wide range of operating temperature and favorable SN ratio can be realized. It was made clear that the dark current of the photomultiplier is composed of two components of contribution by the residual charge stored on the interface at photomultiplying and of contribution by charge injection from the Schottky barrier. Based on this, the residual electric charge removal method by heating and applied pulse voltage was developed. The development for practical use was studied of ultra-high sensitive photoelectric converters. As an intelligent photo sensor, a biomimetic visual photosensor was proposed which uses amplification/memory/arithmetic functions and film formation/processability of organic thin films. The paper also described the image sensor. (NEDO)

  9. Present status and a trend of advanced composite materials research and development. Senshin fukugo zairyo kenkyu kaihatsu no genjo to doko

    Energy Technology Data Exchange (ETDEWEB)

    Asanuma, H. (Chiba Univ. (Japan). Faculty of Engineering)

    1993-01-15

    The advanced composites comprise of polymeric (PMC), metallic (MMC) and ceramic (CMC) types. Some PMCs have already been applied aeroplane parts, ships, sports goods, and others, and reduced their advancing images. The advanced composites given to much attention are the ones durable to more severe environments and using conditions proceeding space development and engines. Now, PMC is expected not only to show their higher specific strengths and modulus of elasticity but also to endure space environmental conditions. NMC and CMC are also expected from their excellent heat resistance point of view. In addition, thereafter, to develop the intermetallic compounds matrix composites, the gradient functional materials, and nano-composite materials, higher functionalities and more intelligences are desired to realize. And, their costs are also occupied at their important portion of their development, and also expected to produce their intelligent processing intending to their cost down. 18 refs., 6 figs., 6 tabs.

  10. Research cooperation of the development of laser radar for environmental measurements; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Research and development of the laser radar for measuring the air pollution in urban areas and the environmental information network have been conducted through the cooperation with Indonesian researchers. A measurement system suitable to actual situation of Indonesia has been constructed. In FY 1996, some works have been conducted as in the final fiscal year. To set the laser radar for environmental measurements and to make a plan of measurement research, conditions of air pollution in Indonesia and setting places of systems have been investigated. Opinions for the cooperation research have been exchanged with Indonesian researchers. Actual trends of the environmental measurements technology using laser radar have been surveyed. Indonesian researchers have been invited to learn operation and data processing of the system. One unit of MIE diffusion laser radar system has been designed and fabricated, and an additional data processing program has been made. The system has been delivered to Jakarta and installed. After the adjustment, performance tests have been conducted to complete the construction of the system. 3 refs., 72 figs., 10 tabs.

  11. Survey of the actual state of the coal related research and development in Japan. 11; Nippon ni okeru sekitan kanren kenkyu kaihatsu jittai chosa. 11

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    NEDO is surveying the actual state of the coal related research/development in Japan to supply information on the coal related research/development in Japan to IEA`s coal research project database. This book of fiscal 1997 version includes 338 subjects. The details described are name of research institute, the section in charge, address, name of country, telephone No., name of joint researcher, research theme, classification, outline of research, project No., name of researcher, sponsor, the budget appropriated, term of research, remarks, etc. The books of data collected from each country in surveys of the actual state of the coal related R and D and IEA`s coal researches which have been made so far are submitted for general viewing at NEDO Information Center. Also, a part of those can be accessible from the energy database of which NEDO Information Center is performing on-line service for user members

  12. Achievement report on research and development of medical and welfare equipment technology. Optical tomographic imaging method; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Hikari danso imaging system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    The aim is to develop a method of processing oxygen concentration distribution in human organs into an image by computed tomography using near infrared rays capable of transmitting through living tissues. Since the photoabsorption spectra of hemoglobin etc. in blood vary according to the degree of their oxidation, an oxygen concentration level is determined by measuring the magnitude of the variation. In the imaging method named in the title, the object is irradiated with picosecond-level near infrared pulses from all directions successively, the pulses after transmission through the object are measured at all directions at a picosecond-level time resolution, and the distribution of pulse scattering and absorption characteristics are subjected to algorithmic calculation, the outcome is converted into oxygen concentration levels, and an image is obtained. A 64-channel time resolution measurement system is constructed, and is applied to living tissue models (phantoms) and animals, and an image is obtained and evaluated. On the basis of the result, a patient is examined for clinical evaluation, and an image reflecting the distribution of variations in hemoglobin oxygen concentration is obtained for the head of the adult patient. A spatial resolution of 1cm is achieved in case of a phantom 10cm in diameter. In the case of 64 channels, measurement takes approximately 20 minutes and mapping image data measurement takes approximately 7 minutes. (NEDO)

  13. FY 1998 annual report on the research and development of superhigh-sensitivity photocurrent conversion devices; 1998 nendo chokokando koden henkan soshi ni kansuru kenkyu kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Described herein are research and development of superhigh-sensitivity photocurrent conversion devices. The huge photocurrent multiplication effect exhibited by a thin film of organic pigment semiconductor is expected to be applicable to various new devices, e.g., superhigh-sensitivity, intelligent optical sensor families and photocurrent devices. Photocurrent multiplier thin films of perylene is prepared by an ionized cluster beam method, to evaluate their structures and photocurrent characteristics as the basic knowledge for controlling their characteristics by the ion engineering procedures. Photocurrent multiplier thin films of new, two-layer structure are developed, and improvement and stabilization of their characteristics are studied. Increasing sensing sensitivity by, e.g., introduction of p-n junction and reducing dark current resulting from the light memory effect are found to be effective to improve the S/N ratio. An organic EL light-emitting layer capable of positive/negative feedback, as one of the elementary techniques for realizing intelligent devices, is made on a trial basis and evaluated for its characteristics, and studied for its application to photocurrent multiplier thin films. Functional devices in which the arithmetic and controlling functions of the thin films are utilized are also studied. (NEDO)

  14. Project to promote the development of global environmental industry technology. Feasibility study of research exchanges; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In fiscal 1995, three teams were organized to study the following subjects: plant genetic and cellular engineering in relation to drought stress; simulation models of global environment for accurate assessment and prediction; the APEC Virtual Center for environmental technology exchange. The team studying plant genetic and cellular engineering in relation to drought stress visited the Department of Botany, Hebrew University of Jerusalem, Israel, the Jacob Blaustein Institute for Desert Research, Ben-Grunion University, Israel, the Department of Biochemistry and the Office of Arid Lands Studies, Arizona University, the U.S. to survey the present and future trend of the study and feasibility of research exchanges. The team studying simulation models of global environment for accurate assessment and prediction visited Yale University, Massachusetts Institute of Technology, Electric Power Research Institute, and Battle Research Institute in the U.S. to survey feasibility of research exchanges. The team studying the APEC Virtual Center for environmental technology exchange visited institutes in ASEAN countries to survey needs for the Virtual Center. 312 refs., 74 figs., 17 tabs.

  15. Achievement report on research and development of medical and welfare equipment technology. Esophageal speech aid system; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shokudo hassei hojo sochi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Research and development of an esophageal speech aid system is carried out to assist patients with the vocal chords lost in pharyngectomy. The goal is to develop a device to enable people, who have had their pharynges removed but can communicate under noiseless circumstances, to communicate easily even in the noisy street. The study involves the development of a voice pickup means, speech signal processing technology, integrated circuit dedicated to the present purpose, esophageal speech signal analyzer, and improvement on the user's comfort. The effort results in a highly directional microphone and a small, high-output loudspeaker. Several real-time signal processing algorithms are developed, including one related to the bandwidth division type analysis and synthesis technique that ensures stable voice conversion. An esophageal speech database is built. A portable esophageal speech aid system is manufactured by way of experiment, which is equipped with the functions of analog simple voice magnification and digital voice conversion. This device serves concurrently as a telephone speech aid system. (NEDO)

  16. Technological development for super-high efficiency solar cells. Survey on the commercialization on analysis; Chokokoritsu taiyo denchi no gijutsu kaihatsu. Jitsuyoka kaiseki ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the survey results on analysis of super-high efficiency solar cells for practical use in fiscal 1994. (1) On the survey on crystalline compound solar cells, it was pointed out that the present study target is III-V compound semiconductor solar cell, and efficiencies of 36-39% are theoretically expected by use of two-junction cells. (2) On structure of super-high efficiency solar cells of 40%, selection of upper and lower cell materials for multi-junction cells, high-efficiency tandem Si solar cells, and the merit and possibility of light collection operation were surveyed, and their issues were discussed. (3) On physical properties of mixed crystalline semiconductors and characteristic evaluation of solar cells, impurities, trap center, minority carrier life, and applicability of supper lattice structure to high-efficiency solar cells were surveyed. (4) On fabrication technology of compound semiconductor solar cells, various problems of and approaches to electrode formation and antireflection film technologies, the meaning and issues of thin film substrate technology and continuous process, trial calculation of costs, safety, and resource problem were surveyed.

  17. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of materials to heighten efficiency of power generation facilities); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (hatsuden shisetsuyo koseinoka zairyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the fiscal 1997 results of the study of the condensation base precise structure control conducted as a technical development of materials to heighten efficiency of power generation facilities. Condensation base polymer is an important material which occupies most of the engineering plastics. The study is aimed at developing basic technologies on the molecular weight and regularity by which a remarkable improvement can be expected in performance of condensation polymerization/ring-opening polymerization polymer materials, polymerization catalyst which arbitarily controls the primary structure such as branch and end group structures, and development of the precision polymerization process. In the synthesis of ordered polymer by direct polycondensation, synthesis of ordered polyamide from asymmetric monomers is studied. In the synthesis of chemically selective polyamide by direct polymerization, polyamide with functional group is synthesized by polymerizing without protecting functional group the monomer with such functional group as causes side reaction in polymerization. In the synthesis of polyamide having the limited distribution of molecular weight, the molecular weight/distribution of polyamide are controlled by connectedly conducting polycondensation which is itself to be done successively. 91 refs., 72 figs., 43 tabs.

  18. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the application technology of functional protein complex (R and D of the high-functional maintenance technology for power plants); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Kinosei tanpakushitsu shugotai oyo gijutsu no kenkyu kaihatsu (hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to develop advanced maintenance technology for power generation facilities, application technology of functional protein complexes is under investigation. On a light controllable enzymatic reaction system, construction of a light controllable bio-reactor by physico-chemical and bio- chemical techniques, and structure and functions of a photosynthetic protein complex using thermophilic cyanobacteria as material are under investigation. On a molecular mechanism for recognition and reaction of receptor proteins, structure analysis and engineering application of glutamate receptor channels of a synaptic transmission system, and basic study and material proteins for artificial structures using endocytic micromachinery, and a multi-enzyme system for synthesis of glycosphingolipids are under investigation. On a complex oxidation/reduction system by genetic engineering technique, construction of a high- efficiency stable system with functionally arranged oxidoreductase and electron transmission systems in biomembranes is in promotion. Research work was also made on molecular assemblies for a functional protein system. 166 refs., 91 figs., 9 tabs.

  19. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (development of precise structure control materials for enhancement of oil refining); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (sekiyu seisei kodoka seimitsu kozo seigyo zairyo kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the R and D of technologies for creating original high-functional materials under the R and D system of industrial scientific technology. Japan chemical Innovation Institute (JCII) is conducting intensive joint researches under consignment from NEDO with private companies, universities and national research institutes. Among those, the paper reported the fiscal 1997 results of the following two researches conducted as development of precise structure control materials for enhancement of oil refining: precision catalytic polymerization and multi-dimensional space polymer. As to the precision catalytic polymerization, the paper is aimed at developing base technologies for the molecular weight and stereoregularity by which remarkable improvement in performance of addition polymerization type polymer can be expected, and on the development of a polymerization catalyst which arbitarily controls the primary structure such as end group structure and of a precision addition polymerization process. Subthemes are addition polymerization with limit and oriented catalytic polymerization. In relation to multi-dimensional space polymer, the paper is aimed at developing highly selective polymerization technology of aromatic compounds using enzyme related catalysts and synthesis technology of regular structure polymer, and synthesis technology of new polymer group having a new chain pattern except covalent bond/new polymer group having characteristics in three-dimensional space geometric structure. 244 refs,, 160 figs., 94 tabs.

  20. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the superconducting material and device (technical development of the Josephson device hybrid system); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chodendo zairyo chodendo soshi no kenkyu kaihatsu (Josephson soshi hybrid system no gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to establish basic technology for hybrid systems of superconducting and semiconducting devices, study was made on ultrahigh speed and low energy consumption properties of Josephson devices. As Josephson IC technology, a logical circuit, ring network, memory circuit, and oxide superconductor logical circuit were studied. As superconducting hybrid system technology, a Josephson device- semiconductor device interface, formation technology of signal transmission lines, and Josephson-MOS IC technology were developed. In fiscal 1997, as Josephson IC technology, switch motion of 4GHz in clock frequency was achieved by new high-density wiring process. Integration of some semiconducting processor elements, junction of surface- stabilized superconducting thin films, and motion of combination structure of some SQUIDs were also confirmed. On the hybrid system, voltage conversion operation of all interfaces was confirmed. Proper logical operation of the Josephson device hybrid circuit was also confirmed. 95 refs., 90 figs., 5 tabs.

  1. Report on the results of research and development under a consignment from NEDO of glycoconjugate production utilizing technologies. Development of technologies to fix and effectively utilize carbon dioxide by applying glycoconjugates; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports research results in fiscal 1997 for the `research and development of glycoconjugate production utilizing technologies`. In synthesizing, utilizing and remodeling technologies for glycoconjugates by means of chemical synthesis, studies were performed on developing methods to synthesize Gal {beta}1-3Gal NA(c {alpha})1-0-Serine in preparative scale, synthesizing high mannose type sugars of natural type without protection groups, and linking GlcNA or GalNAc onto partial peptide of fibroblast growth factor (FGF). In synthesizing, utilizing and remodeling technologies for glycoconjugates by using biological methods, studies were carried out, with regard to glycoconjugate synthesizing, utilizing and remodeling technologies utilizing animal cells, on identifying sugar structures of IFN-{gamma} produced from CHO cell line, and isolating CHO cell lines introduced with genes of sugar transferred enzyme GnTIV and/or GnTV. Furthermore, studies were conducted on glycoconjugate synthesizing, utilizing and remodeling technologies utilizing microorganisms, and glycoconjugate structure analyzing technologies. In addition, overall investigation was made on glycoconjugate production utilizing technologies. 113 refs., 76 figs., 18 tabs.

  2. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules (R and D of the formation of advanced materials for power generation environment); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (hatsuden kankyoyo kokino sozai keisei gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). Ten nanoscale Ge islands were successfully formed in proper positions on an Si substrate surface by using mask technology of nanoscale atomic layers. Growth of less-defect ZnSe films on a GaAs(110) surface was possible under various conditions. The magnetic transfer mechanism of Mn oxide with huge reluctance was clarified. Through study on selective-area deposition of Si on plasma-oxidized ultrathin SiO2 mask layers patterned by direct electron-beam exposure and an idea of SiO2/SiNx bilayer mask, direct use of the ultrathin mask layer as insulating layer in device structure was achieved. The superior property as electron beam resist of methano- fullerene composed of fullerene C60 with side chains including oxygen was clarified. The initial oxidation process of an Si(100) surface was analyzed, and the observation result by SREM was theoretically explained. Development of a high-resolution spin polarization electron microscope was also mentioned. 48 refs., 145 figs., 20 tabs.

  3. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the technology of accelerated formation of bio-functions (R and D of the technology of creation of novel advanced enzymes); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu (shingata kokino koso sosei gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes R and D on creation technique of novel advanced enzymes. In fiscal 1997, a novel mutagenesis technique was developed to obtain more kinds of mutational genes by shuffling between clonal genes as compared with the previous homogeneous recombination. A genotype- and phenotype-linking technology was developed by expressing random motifs (peptide as components of the active site of protein) on bacteria, and by developing a single-motif protein library. Study was made on a selection system for functional molecules of catalytic activities in a gene level, and a selection system for function of signal transduction. Analysis and evaluation study on vitro experimental technology can be efficiently promoted by recognizing the fitness landscape of target protein molecules. As a result, instead of the conventional method which needs several cycles of mutation and screening of 3-4 week/cycle, an efficient method possible to obtain multiple mutants was established. Research work was also promoted by various organizations to develop an accelerated formation technology of bio-functions. 68 refs., 51 figs., 14 tabs.

  4. Industrial and scientific technology research and development project in fiscal 1997 commissioned by the New Energy and Industrial Technology Development Organization. Research and development of superconducting materials and transistors (report on overall investigation of superconductive devices); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chodendo zairyo chodendo soshi no kenkyu kaihatsu (chodendo soshika gijutsu kaihatsu seika hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes development of superconducting new function transistors. Fiscal 1997 as the final year of the project advanced improvement in such transistor-using processes as formation and micro-processing of superconducting thin films to show enhancement in characteristics of high-temperature superconducting transistors and possibility of their application utilizing their high speed motions. Furthermore, fundamental technologies were studied with an aim on junction transistors to be applied as circuits. For field effect transistors, evaluation was performed on critical current distribution of step-type particle boundary junction to make it possible to evaluate characteristics of hundreds of transistors. At the same time, a magnetic flux quantum parametron gate with three-layer structure was fabricated to identify its operation. In superconducting-base transistors, strong reflection was recognized on temperature dependence of permittivity of an Nb-doped strontium titanate substrate used for collectors, by which barrier height was reduced. In the junction transistor and circuit technology, isotropic ramp-edge junctions were fabricated, and so was a frequency divider circuit with single magnetic flux quantum mode operation for evaluating high-speed response characteristics. High time resolution current was observed successfully by using a high-temperature superconducting sampler system. 148 refs., 127 figs., 4 tabs.

  5. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of silicon-based polymeric materials (development of liquid methane fueled aircraft engine); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo / Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Keisokei kobunshi zairyo no kenkyu kaihatsu (methane nenryo kokukiyo engine kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This R and D aims at establishing the basic technology on the molecular design, synthesis, use as materials, and evaluation of silicon-based polymers, of which excellent electronic/optical functions, high heat-resistance/combustion-resistance/dynamic characteristic are expected. The paper introduced the results of the fiscal 1997 R and D of them. The themes are as follows: technology of synthesis of silicon-based polymeric materials with sea-island microstructures, interstitial type structure forming technology, composite materials with organometallic complexes and silicon-based polymers, silicon-based polymer structural materials with ring structures, optimization of the Wurtz`s synthesis method of silicon-based polymers, unsaturated and hypercoordinate organosilicic compounds, function of silicon-based polymers, synthesis and polymerization of new silicon-based monomers, development of a new synthesis method of polysilane and the function, development of new application of silicon-based polymers in imaging devices for recording/memory/display of information, molecular design of {pi}-conjugate and {sigma}-conjugate compounds including silicon, and conformation and electronic state of silicon-based polymeric materials. 186 refs., 141 figs., 68 tabs.

  6. Comparación de los efectos del D-004, imipramina y sertralina en el modelo de nado forzado en ratones

    Directory of Open Access Journals (Sweden)

    Daisy Carbajal Quintana

    2012-09-01

    Full Text Available Introducción: La finasterida, inhibidor de la 5 a-reductasa, se emplea en el tratamiento de la hiperplasia prostática benigna, y ocasiona entre sus efectos adversos un aumento de cuadros de depresión. El D-004 es un extracto lipídico extraído a partir del fruto de la palma real (Roystonea regia, inhibe la 5 a-reductasa y previene la hiperplasia prostática benigna, y muestra un efecto antidepresivo moderado en el ensayo de nado forzado y suspensión por la cola. Objetivo: comparar el efecto del D-004 con la imipramina y la sertralina sobre la duración de las conductas de inmovilidad, nado y escalado en el ensayo de nado forzado. Métodos: se distribuyeron los ratones en ocho grupos: control (vehículo, tres tratados con D-004 (100, 250 y 500 mg/kg, dos con sertralina y dos con imipramina (30 y 50 mg/kg respectivamente. Estos se colocaron en un cilindro de cristal que contenía agua a una altura de 6 cm y se cuantificaron las conductas. Resultados: la administración oral de D-004 (100, 250 y 500 mg/kg durante 14 días redujo significativamente el tiempo de inmovilidad con respecto al grupo control (17, 22 y 25 % y aumentó significativamente la conducta de nado en 1,58, 1,68 y 1,74 veces. Este efecto resulta moderado (25 % comparado con las reducciones alcanzadas por la sertralina y la imipramina (³ 60 %. Las dosis mayores (250 y 500 mg/kg ocasionaron incrementos de la conducta de escalado, 2,79 y 3,55 veces superiores a la del grupo control, lo que mostró semejanza con la imipramina, aunque con una menor eficacia. Conclusiones: el D-004 ejerce un moderado efecto antidepresivo, lo que pudiera contribuir al manejo de los pacientes con hiperplasia prostática benigna en los cuales se informa coincidencia de cuadros depresivos.

  7. Fiscal 1997 project on the R and D of industrial scientific technology under consignment form NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of structure control materials / R and D of molecular harmonized materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) bunshi kyocho zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    By establishing microtechnology using molecular-level bottoming-up (molecular harmonization) by imitating the system of living organism, the paper described the R and D of molecular harmonized materials aiming at developing high-functional/high-performance materials such as high-performance catalyst, photo-information functional materials and sensing materials. Under consignment from NEDO, Japan Chemical innovation Institute started the 5-year plan in fiscal 1997. Self-assembled molecular films, in which organic molecules are orderly arranged by self-assembly, aim at developing new memory/optical/sensing materials. Mesophase materials which are such materials as liquid crystal showing the intermediate state between solid and liquid, develop optical/photoconductive materials using precise molecular orientation controllability. Macroporous materials are such substances as zeolite having molecular size micro pores. The paper aims at establishment of synthesis techniques of them and development of high-performance catalyst, etc. using them. In the comprehensive investigational research, conducted was a survey of the trend overseas in addition to a study of subjects in question. Further, the supporting basic study was reconsigned to universities, etc. 57 refs., 62 figs., 17 tabs.

  8. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of structure control materials / R and D of multi-stimuli-responsive materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) kodo shigeki oto zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described multi-stimuli-responsive materials out of the technology developments for creating original high-functional materials under the system of R and D of industrial scientific technologies. These are materials which repeatedly reproduce functions such as separation, penetration and movement in response to stimuli by imitating living organisms. In relation to polymer multi-stimuli-responsive materials, various copolymers were synthesized using N-acetyl (meta) acrylamide, of which the synthesis method was established in the previous fiscal year, as a main component, and thermal responsive polymer with upper critical solution temperature which becomes a base of separation functional materials was searched for. By immobilizing it with molecular recognition ligand, measured was thermal dependence of affinity of the immobilized matter to albumin. Also studied were molecular recognition cell adhesion/separation functional materials. Concerning composite multi-stimuli-responsive materials, with the use of silica microcapsule surface-immobilized with silane coupling agent, studied were the optimum conditions for immobilizing thermo-responsive polymer to the surface of the capsule. Using motion functional materials by ion exchange resin, obtained was motion functionality which is satisfactory at the state of practical use. 94 refs., 82 figs., 16 tabs.

  9. Potência atada na máxima fase estável de lactato e índices do desempenho aeróbio de nado

    Directory of Open Access Journals (Sweden)

    Dalton Müller Pessôa Filho

    2014-10-01

    Full Text Available INTRODUÇÃO: A perspectiva do nado atado constituir um contexto válido para a avaliação aeróbia de nadadores foi investigada no presente estudo. OBJETIVO: Analisar a relação entre a potência em máxima fase estável de lactato no nado atado (PAtadaMFEL com seu respectivo índice em nado desimpedido (velocidade em MFEL, vMFEL e com outros índices da aptidão aeróbia e desempenho de nado crawl. MÉTODOS: Dez nadadores (16,6 ± 1,4 anos foram submetidos às estimativas de: (a PAtadoCrítica (transformação da assíntota do modelo carga-tempo limite hiperbólico, CargaCríticaAtada, (b PAtadaMFEL e vMFEL (3 ou 4 esforços de 30 minutos entre 95 a 105% da Carga CríticaAtada e entre 85 a 95% da velocidade máxima nos 400 m, respectivamente, (c teste progressivo (79-100% da v400m, com incrementos de 3% para a determinação da velocidade no ponto de inflexão (vPI, e (d testes de desempenho nas distâncias de 400 (v400m, 800 (v800m e 1500 (v1500m metros. Os coeficientes de Pearson e de variância analisaram as correlações entre os parâmetros aeróbios e destes com o desempenho. O teste de Bland-Altman foi utilizado para analisar a concordância entre as concentrações de lactato nas avaliações aeróbias. RESULTADOS: O valor de PAtadaMFEL (89,2 ± 15,1 W apresentou potencial similar de explicação da variância nos desempenhos em v400m (1,29 ± 0,11 m.s-1, R2 = 0,700, v800m (1,23 ± 0,12 m.s-1, R2 = 0,770 e v1500m (1,21 ± 0,12 m.s-1, R2 = 0,698 tal como vMFEL (1,17 ± 0,11 m.s-1 e vPI (1,19 ± 0,11 m.s-1. As concentrações de lactato sanguíneo em PAtadaMFEL, vMFEL e vPI não diferem entre si e distribuíram-se dentro dos limites de concordância. CONCLUSÃO: Pode-se concluir que a aplicação de MFEL em nado atado mostrou-se válida e promissora para a avaliação aeróbia de nadadores.

  10. Transtorno do comportamento alimentar em atletas de elite de nado sincronizado Eating disorders in elite synchronized swimmers

    Directory of Open Access Journals (Sweden)

    Talita Adão Perini

    2009-02-01

    Full Text Available OBJETIVOS: O objetivo do presente estudo foi identificar a presença de transtorno do comportamento alimentar (TCA ou síndromes precursoras e o grau de distorção da imagem corporal em atletas de elite de nado sincronizado. Essa modalidade é considerada de risco para desenvolvimento de TCA por valorizar, além de outros aspectos, a leveza e beleza de movimentos que, de certa forma, estão associados a baixa massa corporal. MÉTODOS: Foram avaliadas 27 atletas de nado sincronizado, sendo 19 da categoria juniores (15,6 ± 0,8 anos e oito da categoria de seniores (19,0 ± 1,3 anos que compunham a seleção brasileira na época do estudo (2000. Um grupo de 32 adolescentes não-atletas (15,0 ± 1,6 anos foi usado para comparação com as atletas. Os procedimentos metodológicos adotados foram: aplicação de três instrumentos de auto-relato, validados. 1 EAT-26 - presença de comportamentos alimentares inadequados; 2 BITE - presença de atitudes sugestivas de bulimia nervosa; e 3 BSQ - insatisfação da auto-imagem corporal. RESULTADOS: Embora tanto o grupo de atletas, quanto o de não-atletas tenham apresentado parâmetros antropométricos compatíveis com padrões saudáveis para a idade e sexo, os resultados evidenciam a presença de insatisfação com a auto-imagem corporal e a adoção de práticas patológicas de controle da massa corporal, sobretudo entre atletas da categoria juniores e entre as adolescentes não-atletas. CONCLUSÕES: Os resultados encontrados no presente estudo retratam uma tendência mundial de preocupação com a aparência entre adolescentes capaz de levá-las à adoção de condutas não-saudáveis.OBJECTIVES: The aim of the present study was to identify the Eating Behavior Disorder (EBD or precursory syndromes and the level of distortion of the body image of elite synchronized swimming athletes. This sport modality is considered of risk for development of eating disorders for valuing, among other aspects, the

  11. Fiscal 1997 report on the cooperative research on the preservation and sustainable utilization of biological diversification; Seibutsu tayosei hozen to jizokuteki riyo nado ni kansuru kenkyu kyoryoku (1997 nendo hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Cooperative researches were conducted between Japan and Thailand, Indonesia and Malaysia for the purpose of the technology development to make developing countries themselves preserve bioresources existing in tropical forests and use those sustainably. The research subjects for Thailand are a strategical study on eating of the primates, improvement of a microorganism culture collection system, preservation of biological diversification using an artificial ecosystem, bioresource utilization, etc. The subjects for Indonesia are a study of a microorganism culture collection system, study of plant preservation technology, study of microorganism utilization technology, study of plant utilization technology, promotion of the founding of the Indonesia tropical bioresource information center, etc. The subjects for Malaysia are biological diversification database and gene bank, assessment/monitoring of the ocean ecosystem, assessment and inventory of the ecosystem using hi-tech technology, search/separation of bioactive substances originated from microorganism/plant, etc. 26 refs., 24 figs., 81 tabs.

  12. Report for fiscal 1994 on commissioned operation for research cooperation related to simplified purification system for industrial waste water; 1994 nendo sangyo haisui nado no kan'i joka system ni kansuru kenkyu kyoryoku hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    With an objective to serve for environmental preservation in developing countries, joint researches have been performed on anaerobic waste water treatment systems utilizing bio-technology. This paper summarizes the achievements in fiscal 1994. In the research cooperation with Thailand, a reactor applicability test was performed by using a pilot plant to determine the operating conditions, and necessary data were obtained. The pilot plant was completed of installation in November. In the research cooperation with Indonesia, Tofu manufacturing waste water was selected as the object of pilot plant research. In the detailed design the Tofu manufacturing waste water shall be treated anaerobically, and the kitchen waste water shall be treated aerobically to acquire the intended water quality. In the research cooperation with Malaysia, as a result of visiting six industries and 22 factories for investigation, waste waters from chemical and foodstuff factories were selected as the object waste waters for the research. Three researchers from Thailand and Indonesia respectively were received in Japan to provide education including experimental training and visits to waste water treatment facilities. (NEDO)

  13. Report for fiscal 1995 on commissioned operation for research cooperation related to simplified purification system for industrial waste water; 1995 nendo sangyo haisui nado no kan'i joka system ni kansuru kenkyu kyoryoku hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With an objective to serve for environmental preservation in developing countries, joint researches have been performed on anaerobic waste water treatment systems utilizing bio-technology. This paper summarizes the achievements in fiscal 1995. In the research cooperation with Thailand, a bench scale testing equipment was used to verify activity of granules, and granulation tests were performed. In the operation research by using a pilot plant, abrupt variation in quality of the feed waste water was encountered, whereas both of the fixed bed system and the UASB system have not reached the stage of tests at the targeted load. In the research cooperation with Indonesia, the actual waste water test in the laboratory scale verified that Tofu manufacturing waste water may be easily decomposed anaerobically, and the kitchen waste water aerobically. The bench scale test is in continuation on actual waste waters by experimenting the applicability of the fixed bed and UASB reactors. In the research cooperation with Malaysia, analysis was performed on chemical factory waste water properties, and so was the anaerobic treatment characteristics test in the laboratory scale. In addition, a preliminary experiment using the bench scale testing device was begun. (NEDO)

  14. Report on achievements of commissioned studies on research and development of a technology to apply human senses to measurements in fiscal 1994. 2. Main issue (Part 4 for research and development of a correlation and evaluation technology); 1994 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Honronhen. Sokan hyoka gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This paper describes the research and development of (1) a method to evaluate warm heat comfort by living scenes of workers by using a human body heat model, (2) a sense volume estimation method using skin temperatures, and (3) a stress measuring technology and a stress relaxing technology by using scent. With regard to the subject (1), the studies having been performed for the past three years incorporated into the human body heat model development such new elements as artery-vein shunted blood vessel and two-system circulation net, and an attempt was made to introduce a conception called AVA activity in the hot-cold heat sensing estimation model. The current fiscal year has carried out collecting basic data for two-model development, and structuring the human body heat model and the hot-cold heat sensing estimation model, and the warm heat environment presenting and measuring system. With regard to the subject (2), such researches were carried out as the 'research on elucidating the correlation between sensing volume and skin temperatures', 'research on the skin temperature changing mechanism', and 'development of a face heat model'. With respect to the subject (3), the hormones noted as the adrenal gland hormone are epinephrine, nor-epinephrine, and dopamine belonging to catecol amine (CA) known as the adrenal gland medulla hormone, and cortisol (CS) being the adrenal gland cortex hormone. The researches in the first term elucidated the interesting relationship between these hormones and negative emotion. (NEDO)

  15. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1993. 4. Research and development of correlation and evaluation technology (Part 1); Ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 4. Sokan hyoka gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The achievements during fiscal 1993 of research and development on a method to evaluate warm heat comfort by living scenes of workers by using a human body thermal model included completion of a human thermal model introduced with physiological knowledge such as artery-vein anastomosed (AVA) blood vessels and two-system blood circulation net. The effectiveness of the model was experimented and verified. It was made possible to estimate the reversal phenomenon occurring in hot heat environment, in which skin temperatures at peripheral body parts rise higher than those in the body trunk part, and skin temperature distribution. In the correlation study to estimate statistically the sense volume from skin temperatures, it was possible to estimate significantly different sense volumes from face skin temperatures, but the estimation accuracy was low because of such factors as difference in individuals. What is important in enhancing the accuracy is to identify ecological reactions of human being caused from change in the sense volume, select effective parameters, and study the mechanisms. In order to develop stress relaxing scents, discussions were given on degree of subjectivity stress by question papers and cortisol concentration in saliva as the parameters. An experimental system was developed to measure the effects of the scents to relax work stresses. A screening method was developed, whereas effects of 15 kinds of scent materials were investigated. (NEDO)

  16. Achievement report for fiscal 1998 on the research and development of super/hypersonic transport propulsion system. Research and development of superhigh-temperature gas turbine for electric power generation; 1998 nendo choonsoku yusokiyo suishin system no kenkyu kaihatsu seika hokokusho. Hatsuden'yo chokoon gas turbine no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    As for the testing of a prototype superhigh-temperature gas generator, an engine is assembled and subjected to an uninterrupted 15-minute-long operation at a turbine inlet temperature of 1,700 degrees C. The engine is then disassembled for inspection, when no damage is found on the combustor or turbine rotor blades or static vanes. The prototype is judged to be sound and the validity of the design is confirmed. In the research and development of superhigh-temperature gas generator elements, technologies for designing cascades in the high-pressure compressor are acknowledged as valid, which are the rotor blade tip trench design technology, the static vane secondary flow control design technology, and the 3-dimensional load distribution optimization design technology. In the research and development of low pollution combustors, studies are conducted about methane-fueled low NOx combustor and National Aerospace Laboratory type low pollution combustor. In the research and development of high-pressure turbines, new shaped hole film cooling is applied to rotor blades and static vanes and a performance test is conducted, and it is found that there is sufficient cooling efficiency. (NEDO)

  17. Fiscal 1998 industrial science and technology R and D system. R and D report on human media / R and D on the advanced information system technology for oil refinery plants; 1998 nendo seika hokokusho. Human media no kenkyu kaihatsu, sekiyu plant kodo johoka system gijutsu kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    As a part of R and D on human media, this report describes the fiscal 1998 result on development of the advanced information system for oil refinery plants. The R and D on human media have been promoted toward construction of a new information system around human beings by advanced integrated media technology since fiscal 1994. The whole concept is body sensation-, heart sensation- and knowledge- friendly media. For safe operation of oil refinery plants, this project develops (1) the intelligent monitoring of measuring instrument information and image information, (2) the display and guidance for facilitating collection of operation data by operator, (3) the modeling for efficient management of previous data and their effective use for current operations, and (4) the autonomous cooperative control technology. In fiscal 1998, the following subsystems were designed and prepared: The interface agent, virtual plant display interface, semantic representation interface, ontology, distributed cooperative processing technology, plant model and interface system. (NEDO)

  18. Achievement report for fiscal 1998 on area consortium research and development business. Area consortium for venture business development by building base for small business (high-precision, real-time measurement of shapes, deformation, and distortion); 1998 nendo venture kigyo ikuseigata chiiki consortium kenkyu kaihatsu (chusho kigyo sozo kibangata). Koseido jitsujikan keijo henkei hizumi keisokuho no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Measurements are analyzed by a Fourier transform phase shift method incorporating the 3-dimensional image processing technique developed at Wakayama University. The system is to exhibit micrometer-order accuracy in the measurement of shapes and nanometer-order accuracy in the measurement of flatness distribution on an object, is easy to handle at the working site, and is inexpensive, non-contact, high in accuracy, and totally automatic, capable of measuring shapes, deformation, movement, stress, and distortion. To be also developed is an inexpensive system easy to operate at the working site, which uses a measuring method based on the phase shift scan moire method, capable of non-contact real-time processing of 30 images per second. Studies are conducted to optimize the performance for higher speeds, studies are conducted to realize automation, higher speeds, and reduction in size, and prototypes will be built corresponding to different objects of measurement. Studies are to begin in connection with business applying the new technology, mass production, commercialization, and standardization. The initial goals have roughly been achieved, and development will continue. (NEDO)

  19. Fiscal 2000 achievement report on the venture business assisting type regional consortium - Minor business creation base type. Research and development of anisotropic conductive material coping with fine pitch design; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo seika hokokusho. Fine pitch taio ihosei dodenzai no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The pitch between electrodes in electric parts, for example semiconductor devices, is becoming increasingly fine, with electronic appliances, which are portable information terminals mainly, growing higher in performance and smaller in size and weight. Efforts were exerted to develop an anisotropic conductive material capable of dealing with fine pitch designs and provided with an insulating structure having an insulating lattice of pores formed by photolithography generally applied to the manufacture of semiconductor devices. For the manufacture of homogeneous particles, a special emulsification method (membrane emulsification) was applied for making the particles as homogeneous as possible. A special classifier was used to shape them into particles of the intended size. The particles were made conductive by coatings of nickel and gold. For their organization into a membrane, a technology of building a lattice with pores of the several {mu}m rule and another for filling the pores with conductive particles were required. A lattice with pores arranged therein was completed using two technologies of photolithography and laser application. A technology for guiding conductive particles into the lattice pores was also established. (NEDO)

  20. Achievement report for fiscal 1998 on area consortium research and development business. Area consortium for venture business development by building base for small business (abuse double protected next generation card system based on steganography); 1998 nendo venture kigyo ikuseigata chiiki consortium kenkyu kaihatsu (chusho kigyo sozo kibangata). Steganography gijutsu wo riyoshita jisedaigata fusei shiyo taju boshi guard system no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A card system is developed using BPCS (Business Planning and Control System) steganography, with electronic data imbedded in the card. Under the system, the visual recognition of the user and the mechanical verification of the card are carried out simultaneously, with the card rejecting any abuse. In fiscal 1998, a system was built by way of trial, constituted of technologies of encoding, decoding, and packaging data into an IC (integrated circuit) card. A photograph of the user's face is attached to the card, the card carries an 8KB IC memory device, and the device stores data of the photograph of the user's face etc. A password has to be inputted before any data may be taken out. A customized key is required to display the imbedded personal data and, for the restoration of the key data, the personal key known only to the owner and the company key that is kept by the card managing company need to be collated with each other. Multiple checking is available for the prevention of abuse, which include the collation of face photographs, collation with display by inputting the password, and request for the customized key to confirm the presence of authority to read the imbedded personal data. (NEDO)

  1. Fiscal 1998 research report on the R and D on industrial science and technology for creating new industries. R and D on intelligent material and structure systems; 1998 nendo shinki sangyo soshutsugata sangyo kagaku gijutsu kenkyu kaihatsu seika hokokusho. Chiteki zairyo kozo system no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project aims at development of the basic technology of the structure system which has the same intelligent functions as living body such as perception, decision and response through information processing/control (brain) by integrating advanced complex material structure (skeleton), fiber or film sensor material/device (nerve) and actuator material/device (muscle). This report describes the fiscal 1998 research result. On health monitoring technology, study was made on development of high-performance sensors, and a damage detection and self-diagnosis system for structural integrity. On active adaptive structure technology, study was made on improvement of a quasi-elastic behavior model for shape memory alloys, and a candidate actuator for noise and vibration reduction. On actuator materials and devices, study was made on the relation between electronic properties and dielectric/electro-strictive characteristics of the latest advanced ceramic materials available. Creation of silent smart structure was also clarified. Smooth connection and cooperation among groups were promoted through the technical committee and research on domestic and overseas trends. (NEDO)

  2. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium energy field / R and D of a task adaptation type group architecture transfer robot system, TRIPTERS (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium energy bun`ya / task tekigogata gun kosei hanso robot system TRIPTERS no kaihatsu kenkyu (daiichi nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper stated the fiscal 1997 result of the development of a task adaptation type group architecture transfer robot system (TRIPTERS) which can cope with changes in carrying task rapidly and flexibly. R and D were conducted mainly of various functional modules, the operation management technology which enables group architecture, and the basic design of a standardized transfer robot. As to the positioning, studied were the construction of the basic hardware of laser position measuring device, and the application method. Concerning the cooperative carrying, conducted were securing of positioning accuracy of matters to be carried, high speed heavy transfer control, and design of dead reckoning system. Relating to the operation management, passable areas were divided into more than one zones, and the effective path reservation method was constructed so that one and the same zone is not occupied. As to the environmental recognition/obstacle avoidance, developed were actual hour/distance acquisition equipment, and autonomous cars running according to the directions of the color sign recognition system by stereo CCD camera. Also conducted were the development of methods to recognize the distance to obstacles and to discriminate areas, the development of mobile sensor, and the basic experiment on running of the demonstration machine. 44 refs., 153 figs., 15 tabs.

  3. Achievement report for fiscal 1998 on area consortium research and development business, 1st year. Area consortium energy research and development (molding material processing eco-system using powder lubricant); 1998 nendo chiiki consortium energy kenkyu kaihatsu bun'ya. Funtai rikei junkatsuzai wo mochiita sokeizai kako eko system no kenkyu kaihatsu (dai 1 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A material processing technology demanding but low energy and cost and causing low environmental impact was developed using a powder lubricant in a closed metal die system. An inorganic powder excellent in adhesiveness as lubricant was discovered. Powder lubricants for die casting and new carbon lubricants for metal die forging were also developed. In a test in an eco-die casting system, it was found that power was better than water solution in terms of finish and energy efficiency. In the development of a metal forging system using a powder lubricant, existing graphite lubricants and new powder lubricants containing fullerene were subjected to evaluation (ring tests). Two types of graphite solutions now in use and two powder lubricants were evaluated by the ring tests, and this enabled the comprehension of powder lubricant characteristics. For the development of a die casting system requiring no lubricant, a metal die surface treatment method was found that produces a surface excellent in resisting erosion by the application of the aluminizing ion nitriding composite treatment method. In addition, wettability was compared between a PVD (physical vapor deposition)-formed nitride film and the powder lubricant constituents. The report also refers to surveys conducted for commercialization. (NEDO)

  4. Achievement report on research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a recombinant DNA utilizing technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    Achievements were compiled on the research in fiscal 1981 on the 'research and development of a recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. For the method to create energy saving type bacteria stocks for processes centering around the escherichia coli, refinement was carried out on cytochrome P-450 and NADPH-cytochrome P-450 reduction enzyme respectively from hepatic microsome of rats administered with induction agents. Attempts were made to prepare antibodies working on them. For the method to create high-efficiency secreting bacteria stocks centering around bacillus subtilis, activity measurement and quantification were performed on enzymes external to the bacillus sutilis, and research was executed on introduction of neutral protease gene sensitive to bacillus subtilis temperatures into the NA20-S17 stock. For the method to create bacteria stocks to substitute raw materials used in the chemical industry, studies were performed on separation of enzymes and corresponding genes, and incorporation of the genes into the escherichia coli. In the comprehensive investigation and research on the recombinant DNA utilizing technology, information exchange and discussions meetings were held, and investigations were made on literatures and patents. (NEDO)

  5. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium energy field / research and development of a reverse engineering system for local industrial articles (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium bun`ya / chiiki kogeihin muke reverse engineering system no kenkyu kaihatsu (daiichi nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the fiscal 1997 result of the research on the application of local industrial article use reverse engineering (RE, it had been regarded as imitation and reproduction technology, but has recently been as a part of the production information integration). With the actual local industrial article as standard, which has features in design and was added with local traditionality, such as glass having 3D free-form surface, 3D shape information modeling technology RE is developed, and a system for direct automatic metal mold processing is established, aiming at shortening of delivery date, cost reduction and higher grade. The target of the research is Okinawa prefecture. In fiscal 1997, study was made of the speeding-up of the non-contact 3D shape information inputting (multi-point simultaneous inputting by CCD of the laser reflected light of the actual model) and the data storage technology. Cast iron was selected as molding materials, judging from reactivity/machinability with heat resistant glass. Also studied was the blend of glass materials suitable for press forming. Further, studies were proceeded with of development of intellectual cutting tools into which sensor function is integrated and of virtual reality for facilitating/accelerating the design up to metal mold manufacturing. 39 refs., 88 figs., 21 tabs.

  6. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium field / R and D on the formation of UHQ transparent conductive films (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium bun`ya / UHQ tomei dodenmaku keisei ni kansuru kenkyu kaihatsu (daiichi nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the formation of low temperature process UHQ transparent conductive films, the development is made of new production process technology exceeding the limit of the conventional technology. The transparent conductive film to be used is ITO. To achieve this purpose, the following were conducted: 1) development of multi-beam UHQ thin film forming equipment, 2) fabrication of low resistance rate transparent conductive film of 10{sup -5}ohm{center_dot}cm order, 3) formation of transparent conductive film around 100degC, 4) evaluation of UHQ transparent conductive film, 5) comprehensive research/survey, etc. In 1), thin film forming equipment is developed which uses characteristics of each excitation beam such as cluster ion beam, radiation and laser. In 2), low resistance rate of 10{sup -5}ohm{center_dot}cm order is realized by ultraprecisely controlling structures of elements composing the film, using the practical equipment developed by Osaka National Research Institute. In 3), low temperature film formation around 100degC is realized by precisely controlling atomic/molecular energy in the reaction. In 4), film evaluation is conducted from a practical aspect by measuring resistance rate, transparency, hole constant, etc. of the film developed. 13 refs., 47 figs., 29 tabs.

  7. Fiscal 1998 R and D report on femtosecond technology (power generation facility monitoring system using high- intensity X-ray pulse); 1998 nendo femuto byo technology no kenkyu kaihatsu (kokido X senb pulse riyo hatsuden shisetsu monitoring system no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report reports the fiscal 1998 R and D result of Femtosecond Technology Research Association (FESTA) supported by NEDO. For creation of industrial basic technologies supporting the advanced information society in the 21st century, ultra-high speed electronics technology including new functions beyond the speed limit of conventional electronics technologies is indispensable. From such viewpoint, this R and D aims at establishment of the basic technology controlling conditions of beams and electrons in a femtosecond (10{sup -15}-10{sup -12} seconds) region. In development of the titled system, this R and D aims at generation of high-intensity X-ray pulse by interaction between femtosecond light pulse and high-density electron beam pulse, and development of measurement technology (non- stop inspection) of high-speed moving objects using such X- ray pulse. In fiscal 1998, this project succeeded in time stabilization of laser oscillators at a 100fs level and generation of low-emittance electron beam pulse through development of ultra-short pulse synchronization, laser stabilization and electron beam pulse generation technologies. (NEDO)

  8. Achievement report for fiscal 1998 on research and development of industrial science technologies. Research and development on synergy ceramics (research and development of ultra-high temperature gas turbines for electric power generation); 1998 nendo shinaji ceramics no kenkyu kaihatsu. Hatsuden'yo koon gas turbine no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper describes development of synergy ceramics. In developing a technology to design property fusion processes, studies were made on control of nano-structures by using a high-order nano-structure process, and on evaluation of micro region properties. Such nanocomposite bodies were selected for the object as piezoelectric ceramics PZT group (which increases mechanical characteristics and durability without impeding electric characteristics) and alumina-group YAG (which enhances high-temperature strength). Three-dimensional analyses were performed on particle morphology and crack structures by using focusing ion beams as a study on destruction behavior by means of microscopic and macroscopic particle morphology control. This paper reports the achievements of research and development on control of continuous small pore morphology (uni-directionally pierced pores on a new-type low expansion material used as matrix), intra-particle interface (discusses methods to micronize silicon nitride ceramics tissues), intra-layer interface (oxide-based ceramics are laminated on surface to improve oxidation and heat resistance without impeding high-temperature mechanical properties of non-oxide-based ceramics), intra-layer boundary (Pb-based double composition piezoelectric body having stable layer interface), and boundaries between inorganic and organic matters. (NEDO)

  9. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium field/ R and D on the technology to create new organic electroluminescence devices (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium bun`ya / shin`yuki electroluminescence device no sosei gijutsu ni kansuru kenkyu kaihatsu (daiichi nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper develops the R and D having as core creative technical seeds on the design principle of organic electroluminescence (EL) devices, aims at producing as products a polychrome display and a new energy saving type light source, develops new high efficient luminescent materials which support the production of products with high liability, and develops protective coats universally applicable to optical and electronic devices and sealing technology. In fiscal 1997, the following are commenced: 1) development of luminescent devices, 2) development of new luminescent agents, and 3) development of the mounting technology. In 1), the following are conducted: R and D for improvement of durability of EL devices, development of the process technology for polychroism, multi-coloring, and development of the large picture thin film formation technology. For the development of energy saving type high efficiency light source devices, a method is established for producing organic layers by a new wet coating method. In 3), the R and D are carried out of a method to form inorganic protective coats at low temperature and a method to highly evaluate structural defects in the protective coat. For the sealing of devices, low melting point glass and the forming technology are developed. 41 refs., 112 figs., 19 tabs.

  10. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium energy field/R and D high performance flat panel display technology (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium energy bun`ya / koseino flat panel display gijutsu no sogo kaihatsu kenkyu (daiichi nendo ) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    One of the subjects in technology supporting the highly information-oriented society which will develop and diversify toward the 21st century is the construction of high grade man/machine interface. For it, high precision/high luminance/energy saving/thin plane displays are strongly requested. This R and D is to indicate models of systematical development in the region of element technology individually existing in the Shikoku area by forming a regional consortium in the industry/universities/government. Creation of new industries by gathering display related enterprises is a first step in a plan to realize `Display Island Shikoku.` As a concrete target, with the use of high-tech diamond semiconducting technology, a development is conducted of the high performance flat panel display using the negative electron affinity (NEA) electron emitter which drastically solves the problems such as luminance, visibility angle and response speed, the subjects on the commercialized liquid crystal flat panel display. 16 refs., 45 figs., 8 tabs.

  11. Fiscal 1998 regional consortium R and D project (Regional consortium field). Report on R and D of production technology of hybrid-type biocompatible hard tissue replacing materials (1st fiscal year); 1998 nendo chiiki konsoshiamu kenkyu kaihatsu jigyo. Chiiki konsoshiamu bun'ya (hybrid gata seitai yugo kinosei kososhiki daitai sozai seizo gijutsu no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This project aims at development of high-strength high- biocompatible {beta}-type Ti alloy with lower modulli of elasticity composed of non-toxic elements, phosphate calcium ceramics for improving the biocompatibility and coating technology, and establishment of production technology of hybrid-type biocompatible hard tissue replacing materials. In fiscal 1998, the project promoted the following: Design of high-biocompatible {beta}-type Ti alloy materials, development of thermomechanical treatment for improving dynamic characteristics of such alloy, survey on practical melting and casting technologies and dental precision casting process, evaluation of the biocompatibility of the alloy by cytotoxicity, selection of tools for precision machining and surface finishing, control of contents, orientation and precipitation of biocompatible crystals such as {beta}- Ca(PO{sub 3}){sub 2} fibers for further improvement of the biocompatibility. This paper also outlines the survey results on the market needs, market size and market share for the feasibility of these materials. (NEDO)

  12. Fiscal 1998 R and D project on global environmental industrial technology. R and D result report on environment- friendly production technology (advanced chemical synthesis reactor); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bio reactor) kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For high-efficiency production of substances by bioreactor, study was made on a bio-control mechanism as its elementary technology. On the study of breeding technology by expression control, the structure design of a control region and development of new expression vectors had been finished, and study was made on breeding of high-efficiency recombinant production cells by using candidate expression vectors. On the study of breeding technology by multi-stage enzyme reaction control, the enzyme gene of a system synthesizing cysteine from glycerol was searched, and hydroxypyruvaldehyde hydrogenase gene was isolated as substance production model. Cysteine production Escherichia coli combined with serineacetyl transferase gene was also prepared. In addition, study started on cloning of hydroxyacetone oxidase gene. On development of reactor system technology, for conversion of serine to cysteine, study was made on optimization of a reaction condition by theory of enzyme reaction rate. (NEDO)

  13. Fiscal 1997 report on the results of the international standardization R and D. R and D of the standardization of a method to test acceleration life of phosphorous acid fuel cells; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Rinsangata nenryo denchi no kasoku jumyo shiken hoho no hyojunka ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As for fuel cells, which are expected as a new clean energy, the R and D are being proceeded with in various fields of the world, but the standardization has not been made both in Japan and abroad. In Japan, the situation is that the information on technical terms, indication method, performance test method, and environment/safety test methods of the phosphorous acid fuel cell power generation is publicly spread. In relation to the international promotion of fuel cells to be predicted, it is necessary to internationally standardize cells themselves which are a key component of fuel cell power generation facilities. Phosphorous acid fuel cells are expected of the earliest commercialization of all, but the common test method to evaluate life characteristics of the cell stack has not been established yet. In the R and D, for the purpose of internationally standardizing test methods to evaluate life characteristics of the cell stack, a study on the acceleration life test method of phosphoric acid fuel cells was conducted in terms of the technical trend, data, standard, etc. A plan was prepared on general rules of the method to test acceleration life at the cell reaction part of the small cell, and activities also were started for setting up a technical committee for the fuel cell power system in President`s Advisory Committee on Future Technology. 29 figs., 20 tabs.

  14. Antidepressant behavioral effects of duloxetine and fluoxetine in the rat forced swimming test Efeitos antidepressivos da duloxetina e da fluoxetina no teste do nado forçado em ratos

    Directory of Open Access Journals (Sweden)

    Leandro Ciulla

    2007-10-01

    Full Text Available PURPOSE: To compare the effects of the antidepressant drugs duloxetine and fluoxetine on depressive behaviors in rodents. METHODS: Eighteen male Wistar rats were given systemic injections of duloxetine, fluoxetine, or saline prior to a Forced Swimming Test (FST. Immobility and number of stops were measured. RESULTS: Rats given injections of fluoxetine displayed significantly less immobility (p = 0.02 and fewer stops than the control group (p = 0.003. Duloxetine significanlty reduced the number of stops (p = 0.003, but did not effect immobility (p = 0.48. CONCLUSION: Duloxetine and fluoxetine reduced depressive behaviors in the Forced FST. However, our findings suggest that fluoxetine is more effective than duloxetine.OBJETIVO: Comparar o efeito antidepressivo da droga cloridrato de duloxetina com a fluoxetina. MÉTODOS: O teste do nado forçado, teste comportamental que avalia a atividade antidepressiva em ratos, foi utilizado em 18 ratos Wistar, machos adultos, divididos em três grupos iguais: duloxetina, fluoxetina e controle. RESULTADOS: Os dados do teste do nado forçado foram analisados pelo teste One-way ANOVA, Mann Whitney e Kruskall-Wallis.Houve diferença significativa (p = 0,003 entre o número de paradas dos grupos duloxetina e fluoxetina e o grupo controle. CONCLUSÃO: A duloxetina e a fluoxetina tiveram frequência de paradas similares. A fluoxetina mostrou ser mais efetiva que a duloxetina no teste do nado forçado em ratos.

  15. FY 1999 report on the results of the project on the industrial science technology R and D. R and D of complex carbonhydrate production/utilization technology (Development of CO2 fixation/effective utilization technology by applying complex carbonhydrate); 1999 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo. Fukugo toushitsu seisan riyo gijutsu no kenkyu kaihatsu (Fukugo toushitsu oyo nisankatanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of making an industrial use of complex carbonhydrate performing an important function in substance recognition, etc., which cannot be realized by only nucleic acid, protein and lipid, the R and D of the basic technology related to the production/utilization were conducted, and the FY 1999 results were reported. In the study of synthesis/utilization/remodeling technology of complex carbonhydrate using the chemical synthesis method, the R and D were made not only on the synthesis of sugar chain but for the synthesis method of the peptide added with sugar chain, that is, glycopeptide. Further, as to the reaction with the aim of the application, there was hope for large-quantity synthesis of milk oligosaccharide by the oxygen method. In the study of the design technology of complex carbonhydrate molecules, the systematical analysis using the model glycopeptide was conducted of effects of the sugar chain addition part and sugar chain structure on the 3D structure and physiological activity. Concerning the synthesis/utilization/remodeling technology of complex carbonhydrate using the biological method, study was made of the animal cell utilization, microorganism utilization, technology of structural analysis of complex carbonhydrate, etc. (NEDO)

  16. `Research and Development of Technology for Controlling the Structure of Multiple-Function Component,` local research and development of important technology for fiscal 1997. 2. Technological development of advanced surface treatment for methane-powered aircraft engine components (Laser-aided advanced treatment system (technology)); 1997 nendo juyo chiiki gijutsu kenkyu kaihatsu `fukugo kino buzai kozo seigyo gijutsu no kenkyu kaihatsu`. 2. Methane nenryo kokukiyo engine buzai no kodo hyomen kako gijutsu kaihatsu (laser oyo senshin kako system gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Surface reforming technologies, such as laser-aided Ti alloying, are studied for developing erosion-resistant materials for the fore section of a methane-fueled aircraft engine. In the formation of intermetallic compound film, the laser plasma hybrid spraying is applied for the formation of a film which is 100-400 times higher than Ti6Al4V in terms of resistance to erosion. For the quantitative evaluation of bond strength, a boundary shear testing jig is built. When the laser irradiating conditions are optimized, the boundary shear strength is elevated to 150-230MPa. NiAl film is studied for realizing resistance to high-temperature oxidation, and then a perfect NiAl film is obtained, which is done by use of a mechanical alloying powder mixed on the atomic level. In the manufacture of ceramic cermet film, a powder is studied, in which powder SiC and Al2O3, excellent in high-temperature oxidation characteristics and fracture toughness, are the parent materials which are coated by NiCr. It is found that an excellent oxidation-resistant film will be manufactured by use of this powder. 40 refs., 132 figs., 12 tabs.

  17. 1998 report on results of R and D project for industrial science and technology (R and D for technologies of producing innovative high performance material) (development of technologies for structural control material). R and D for high stimuli-responsive material; 1998 nendo dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) kodo shigeki oto zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A report was made on the results of 1998 R and D concerning high stimuli-responsive materials. This R and D was intended to develop technologies for producing, by copying organism, innovative new stocks and new materials which repeatedly provide functions such as separating, transmitting and moving in response to stimuli. In the R and D of polymeric high stimuli-responsive materials, studies were conducted on multi-stimuli-responsive separation materials, molecular recognition controlled separation materials, and cell adhesion/separation materials with molecular recognition function. In the R and D of composite high stimuli-responsive materials, release controlled function materials and materials for actuator were studied. The investigation and research of common basic technologies were carried out on such subjects as synthesis and functional development of multi-signal responded polymer gels, development of temperature-responsive chromatography, synthesis and characterization of novel stimuli-sensitive materials, studies on structural characterization of intelligent gels, novel thermosensitive polymers, polyelectrolytic model networks, etc. (NEDO)

  18. FY 1997 report on the results of the industrial technology R and D project. Development of technology to use biological resources such as the complex biological system (Development of biological use petroleum substitution fuel production technology); 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Experimental researches were conducted and the FY 1997 results were reported with the aim of establishing analytical technology for the complex biological system by which the complex biological system can be analyzed in such a state as it is using the molecular biological method. In the study of the molecular genetic analytical technology, PCR primers used for amplification of topoisomerase II genes of the whole eukaryote was designed. As to the histochemical analytical technology, a study was made on the new constitution microorganism detection method by the hybridization method and the antibody specific dyeing method, and the following were conducted: manifestation in quantity of colibacillus and the recovery, refining, and construction of peptide library by fuzzy display method. Concerning the functional analytical technology, technological researches were made such as the environmental adaptation mechanism of high thermophile and the information transfer mechanism among bacteria through cell membranes for elucidation of the special environment detection/response mechanism and the special environment adaptation/resistance mechanism. As to the separation/culture technology, various anaerobic microorganisms were separated from marine sponge for the development of a method of culturing in 3D matrices. (NEDO)

  19. Achievement report for fiscal 1997 on the development of technologies for utilizing biological resources such as complex biosystems. Development of technologies for producing substitute fuel for petroleum by utilizing organisms; 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Technologies of producing useful substances using the substance decomposing/producing functions of complex biosystems and methods of their handling are developed. In the utilization of microbes in the digestive tracts of termites and longicorns, it is made clear that several kinds of termites cleave the {beta}-O-4 ether linkage. In relation to technologies for wood decomposing complex microbial system construction and complex vector system development, a screening system is constructed in which strains that exhibit complex actions are combined. Concerning the advanced utilization of tropical oil plants, conditions are determined for inducing callus out of oil palm tissues. Out of oil palm sarcocarp tissues, mRNA (messenger ribonucleic acid) is isolated for the construction of a cDNA (complementary deoxyribonucleic acid) library. For the purpose of isolating a powerful promoter, a partial base sequence is determined for ubiquitin that frequently expresses itself in cells. A pathogenic bacterium ailing the oil palm is sampled for identification, and it is inferred that the bacterium is a kind of Ganoderma boninense. (NEDO)

  20. Fiscal 1997 report on the verification research on geothermal prospecting technology. Theme 3. Development of a reservoir variation prospecting method (development of electric/electromagnetic prospecting methods); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. 3. Choryuso hendo tansaho kaihatsu (denki denjiki tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To evaluate geothermal reservoirs in the initial stage of development and keep stable output in service operation, measurement of self-potential and resistivity changes due to production and reinjection of geothermal fluid has been made. This paper describes the result in fiscal 1997. To study the placing method and stability of electrodes for continuous self-potential monitoring network in fiscal 1998, continuous monitoring of potential differences started in an experimental field. The placing condition and electrode will be selected by July. By surveying self-potentials after the beginning of operation of Oogiri geothermal power plant, a distribution range of negative and positive potential anomalies was clarified. To predict the resistivity change, long-term change in salinity concentration in a reservoir was estimated by a hydrothermal flow concept model. The resistivity change caused by reservoir variation due to plant operation was also predicted to study its detection by MT method on the ground. The salinity concentration change due to reinjection, and resistivity change due to a two-phase region in the top of a reservoir were considered. 17 refs., 56 figs., 19 tabs.

  1. Achievement report for fiscal 1997 on the development of technologies for utilizing biological resources such as complex biosystems. Development of complex biosystem analyzing technology; 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei kaiseki gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The aim is to utilize the sophisticated functions of complex biosystems. In the research and development of technologies for effectively utilizing unexploited resources and substances such as seeweeds and algae, seaweeds are added to seawater to turn into a microbial suspension after the passage of two weeks, the suspension is next scattered on a carageenan culture medium, and then carageenan decomposing microbes are obtained. In the research and development of technologies for utilizing microbe/fauna-flora complex systems, technologies for exploring and analyzing microbes are studied. For this purpose, 48 kinds of sponges and 300 kinds of bacteria symbiotic with the sponges are sampled in Malaysia. Out of them, 15 exhibit enzyme inhibition and Artemia salina lethality activities. In the development of technologies for analyzing the functions of microbes engaged in the production of useful resources and substances for animals and plants, 150 kinds of micro-algae are subjected to screening using protease and chitinase inhibiting activities as the indexes, and it is found that an extract of Isochrysis galbana displays an intense inhibitory activity. The alga is cultured in quantities, the active component is isolated from 20g of dried alga, and its constitution is determined. (NEDO)

  2. Fiscal 1997 report on the verification research on geothermal prospecting technology. Theme 4. Development of a reservoir variation prospecting method (development of a micro-earthquake monitoring system (MEMS)); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. 4. Choryuso hendo tansaho kaihatsu (jishinha tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To evaluate geothermal reservoirs in the initial stage of development and keep stable output in service operation, the application of MEMS is under development. This paper describes the result in fiscal 1997. Installation of 3-component velocity type seismometers in bore holes is desirable for permanent monitoring sites. Their arrangement should be determined by detection ability simulation. Their locations at various elevations are effective to improve the accuracy of hypocenter determination. Digital seismic data at the permanent sites are transmitted to a center through cables, while temporary data are recorded on site. For poor MEPAS, a Windows program of basic functions was developed. 3-D seismic velocity analysis and array monitoring system were also studied. A P-wave velocity of rocks decreased by 25% by formed two-phase region, and increased by 10% by decrease in reservoir temperature from 200 to 100degC. The velocity can be detected by change in travel time of direct waves due to considerable variation in reservoir environment. VSP technique using a vibrator or air gun as artificial hypocenter is effective for MEMS. 67 refs., 64 figs., 19 tabs.

  3. Fiscal 1997 report under consignment from NEDO on the R and D of femto-second technology (development of ultra short pulse optoelectronics technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku femto gyo technology no kenkyu kaihatsu (chotan pulse ko electronics gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Very high speed electronics technology is indispensable for the creation of industrial base technology which supports high grade informatizing in the 21st century. The state of light and electronics is controlled in the femto-second time domain. As to the development of femto-second light pulse generation/transmission technology, mode synchronous semiconductor laser was manufactured using the strain quantum well structure aiming at heightening profit, and the repeated frequency, 166GHz, was achieved. Relating to the pulse compression element, exciton photonic band was newly designed. A technology of coding was also studied. As to the development of technology of femto-second light pulse control/distribution, shortening of the wavelength down to 1.5{mu}m and a possibility of femto-second domain high speed response were indicated by the combined double quantum well structure. The quantitative measurement of spin relaxation characteristics was successfully made. By the Mach-Zehnder light switch, obtained was the world`s fastest light switching characteristic. To realize the femto-second class very high speed element, conditions were grasped on the crystal growth of Sb based ultra thin films operating in the 1.5{mu}m zone by studying the quantum well using transition among sub-bands. 242 refs., 280 figs., 12 tabs.

  4. Fiscal 1998 R and D project on industrial technology. Development report on use technology of bioresources such as bioconsortia (Development of analysis technology of bioconsortia); 1998 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugo seibutsukeinado seibutsu shigen riyo gijutsu kaihatsu (fukugo seibutsukei kaiseki gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For use of advanced functions of bioconsortia (complex microorganisms composed of more than 2 microorganisms with certain specific function), this project analyzes specific functions of specific organisms and the interaction between the specific functions, and develops isolation and incubation technologies of component organisms. In fiscal 1998, to promote this project, the meetings were held frequently in National Institute of Bioscience and human Technology. Study was made on production of useful substances and useful degradation functions in association with bioconsortia. The result showed that microorganisms coexisting with nematode produced physiologically active substances exhibiting antimicrobial activities to tubercle bacillus, MRSA and others, microorganisms coexisting in eggs of some insects produced substances having antiviral activities and activities against pathogenic bacteria in a plant, and microorganisms growing in some plants or mycorrhiza organisms produced insecticidal substances or growing-promoting substance. The basic understanding was obtained on cooperative actions of bioconsortia to bioremediation and degradation of organic substances. (NEDO)

  5. FY 1998 industrial technology R and D project. Report on the results of the development of utilization technology of biological resource such bioconsortia system (Development of production technology of biological use petroleum substituting fuels); 1998 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugo seibutsukeinado seibutsu shigen riyo gijutsu kaihatsu (seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Technology development was conducted for production of useful substances using the bioconsortia system. In FY 1998, the development of element technology was studied. As to the utilization technology of gut symbiotic microorganisms such as termite and longhorn beetle, clone types of gut microorganism complex system were analyzed to find out the diversification. In the decay of wood, co-culture of two species of mold fungus was increased in efficiency than single culture. More than 90% was classified/identified of the mold fungi accumulated (in wood piece)/separated for the utilization of plant symbiotic microorganisms. For the production of petroleum substituting useful resource, conditions were established of callus induction from immature embryos of tropical oil crops, especially oil palm, and of regeneration of a lot of small plants from the callus. To establish the Agrobacterium-mediated transformation system of oil palm, the binary vector harboring the reporter gene and selectable marker gene was constructed. Using the vector, oil palm tissues are inoculated and infected with agrobacteria. To heighten the function of palm oil, 10 particular clones were selected from the complementary DNA library obtained from oil palm fruit tissues. The genetic study of germs was also made. (NEDO)

  6. Fiscal 1995 report on the results of the subsidy operation under the Sunshine Project on the development of a geothermal water use power plant, etc. Development of the deep geothermal resource collecting technology (development of the deep geothermal resource drilling technology); 1995 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen kussaku gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper reported the results of the fiscal 1995 R and D on the development of deep geothermal resource collecting/drilling technology. In the design of a total development, the trend of technical development was examined of bits, cement and DHM overseas. Further, the simulational prediction was conducted in deep geothermal drilling. As to the development of element technology of hard high temperature strata drilling, the R and D of seal mechanism, bearing mechanism and cutter mechanism were carried out aiming at developing heat resistant/durable bits, and a bit was trially manufactured which was integrated with element parts selected by each element technology. Concerning the development of high temperature drilling mud, studies were made of the development of drilling mud materials, a mud system, etc. Relating to the development of high temperature cement slurry, the development was conducted of high temperature cement, dewatering adjusting agents, etc. As to the development of high accuracy much inclination drilling technology, in the development of high temperature use downhole motor, tests on heat resistance/durability were carried out in the mud of 12 kinds of high heat resistant stator materials. 175 figs., 137 tabs.

  7. Fiscal 1996 report on the results of the subsidy operation under the Sunshine Project on the development of a geothermal water use power plant, etc. Development of the deep geothermal resource collecting technology (development of the deep geothermal resource drilling technology); 1996 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen kussaku gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper reported the results of the fiscal 1996 R and D on the development of deep geothermal resource collecting/drilling technology. In the design of a total development, the planned adjustment of actual well tests was conducted on bits and drilling mud at the time of drilling the exploration well of the Kakkonda area. As to the trend of overseas technology, examined was the developmental trend of high temperature type downhole motor products. In the development of hard high temperature strata drilling element technology, a drilling test was carried out on trially manufactured 300degC heat resistant/durable bits. In the development of high temperature drilling mud, drilling was done in the mud of thermally stable quality in the actual well experiment using the 300degC mud system. In the development of high temperature use cement and high temperature use cement slurry, a possibility was obtained of composing a slurry which has the targeted dewatering amount, compressive strength, and water permeability. In the development of high temperature downhole motor, data on characteristics of heat resistant stator materials were arranged in a relationship among the abrasion amount, thermal expansion amount and elastic recovery amount, and the database was obtained. 166 figs., 148 tabs.

  8. Fiscal 1996 report on the results of the subsidy operation under the Sunshine Project on the development of a geothermal water use power plant, etc. Development of the binary cycle power plant (development of the measurement while drilling system for geothermal wells); 1996 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (binary cycle hatsuden plant no kaihatsu (chinetsusei kussakuji kotei joho kenchi system no kaihatsu))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The R and D were carried out of a detecting system for measurement of data on the bottom of geothermal well, data transmission and signal processing, and an analysis system for well drilling trajectory control and well assessment while geothermal well drilling based on the data obtained by the detecting system. The paper reported the results of the technology development in fiscal 1996. In the development of the detecting system, improvement/design were conducted on a mud pulse generator constituting sonde, well bottom signal processing equipment, mode switch and inclined information sensor, and the system equivalent to the actual one was manufactured to conduct a running test at high temperature/pressure. Moreover, a test to confirm heat resistance of electronic parts was made for further improvement in heat resistance of the sonde, in order to obtain the data. In the development of an analysis system, conducted were enhancement of operability of the planning/indication portions of the well drilling trajectory supporting system, improvement of the data intake system, etc. In relation to the well assessment supporting system, carried out were heightening of operability of the temperature analysis portion and confirmation of accuracy increase. 5 refs., 253 figs., 72 tabs.

  9. Fiscal 1997 report on the results of the New Sunshine Project subsidiary operation. Development of the geothermal water use power plant, etc. (development of the binary cycle power plant / development of the geothermal well MWD system); 1997 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (binary cycle hatsuden plant no kaihatsu (chinetsusei kussakuji kotei joho kenchi system no kaihatsu))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of improving efficiency and accuracy in geothermal well drilling, the development was conducted of an MWD (measuring while drilling) which detects borehole information in real time. In fiscal 1997, the following R and D were carried out. As to the downhole equipment, the actual well experiment on the sonde was conducted to confirm the basic performance. The design improvement, trial fabrication and experiment were conducted on mud pulse generating valve driving control equipment, bore hole signal processing unit and temperature correction circuit portion in the sonde. Concerning electronic parts, a heat resistance confirming test was conducted for data collection/assessment. Further, jigs were fabricated for tests to confirm working of each equipment. Relating to the ground equipment, conducted were improvement of the decoded program and betterment of the analytical system and interface. As to the development of the analytical system, data on depth were added to the azimuth/inclination obtained from MWD, which enabled indication of a well drilling tracing chart while drilling. 92 figs., 43 tabs.

  10. Surface swimming behavior of the curculionid Ochetina uniformis Pascoe (Erirhininae, Stenopelmini and Ludovix fasciatus (Gyllenhal (Curculioninae, Erodiscini Comportamento de nado superficial exibido pelos Curculionidae Ochetina uniformis Pascoe (Erirhininae, Stenopelmini e Ludovix fasciatus (Gyllenhal (Curculioninae, Erodiscini

    Directory of Open Access Journals (Sweden)

    Wesley Oliveira de Sousa

    2007-03-01

    Full Text Available The swimming behavior exhibited by specimens of L. fasciatus and O. uniformis was analyzed frame-by-frame with video observation recorded with a digital camera, attached to a stereomicroscope. Adults of O. uniformis, an aquatic insect, swim with all three pairs of legs. During the process of swimming the majority of the abdomen and rostrum remain submerged, part of the fore and hind tibiae remain above the surface, while the mid tibiae remain submerged. The mesothoracic legs, during the power-stroke stage, provide the greatest thrust while the metathoracic legs provide the least forward propulsion. The prothoracic legs, extended forward, help to direct the swimming. The semi-aquatic specie L. fasciatus shows the same swimming style as O. uniformis, that is, with movement of all the three pairs of legs; the mesothoracic legs are responsible for the main propulsion. The insect body remains on the water surface during the process of swimming, while the legs remain submerged. Both species complete a swimming cycle in 0.33 and 0.32 seconds, respectively, with an average speed of 1.38 cm/s and a maximum and minimum swimming duration time of 11.15 and 5.05 minutes, respectively, for L. fasciatus. The swimming behavior exhibited by O. uniformis and L. fasciatus corresponds to the style known as a breast strokelike maneuver. This is the first record of this kind of swimming for both species here observed and increases to seven the number of genera of Curculionidae exhibiting this behavior.O comportamento de nado exibido por indivíduos de L. fasciatus e O. uniformis foi analisado quadro a quadro através de imagens obtidas com o auxílio de uma câmera fotográfica digital com opção de vídeo, acoplada a um estereomicroscópio. Foi demonstrado que O. uniformis, espécie aquática, nada com o auxílio dos três pares de pernas. Durante este processo a maior parte do abdome e rostro localizam-se abaixo da superfície da água, parte das t

  11. Report on technological development of fuel cell power generation 1998. Research and development on polymer electrolyte fuel cell (technological development of generating system, development of atmospheric operation home power system of several kW class); 1998 nendo seika hokokusho. Nenryo denchi hatsuden gijutsu kaihatsu, kotai kobunshigata nenryo denchi no kenkyu kaihatsu, hatsuden system gijutsu kaihatsu, joatsu sadogata su kW kyu kateiyo dengen system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper explains the results of the research and development of polymer electrolyte fuel cells in fiscal 1998. For the purpose of developing a power source suitable for household use, a cell unit was developed in which performance was improved by reducing the thickness of a catalyst layer and increasing its ion-exchange capacity in the fuel cell body. There were prospects that low cost carbon materials and resin materials were usable in a carbon/resin composite plate. In the fuel supply technology, a serial two step type remover was developed concerning CO in a fuel using a selective oxidation process, which confirmed that the exit concentration was reducible to 10ppm or below even under a low S/C condition. With a reform ratio of 95% achieved with a 1kW class natural gas reformer, a thermal efficiency of 85% was attained by efficiently using combustion exhaust gas/reform gas sensible heat. In order to achieve a power generating efficiency of 35%, it is essential to improve reformer heat efficiency and cell performance, and also to produce steam for reforming by effectively utilizing reform gas/burner exhaust gas. The 1kW class module was verified in its stable operation and performance. (NEDO)

  12. FY 2000 report on the results of the development of commercialization technology of the photovoltaic power system. Summary. R and D of the photovoltaic power generation utilization system/periphery technology (R and D on the improvement of reliability of photovoltaic power generation - Investigative study of the electric safety of the photovoltaic power system); 2000 nendo New sunshine keikaku seika hokokusho. - Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu - Taiyoko hatsuden riyo system shuhen gijutsu no kenkyu kaihatsu (Taiyoko hatsuden no shinraisei kojo ni kansuru kenkyu kaihatsu - Taiyoko hatsuden system no denkiteki anzensei no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the prevention of the secondary disaster associated with the leakage of electricity and spark generation in the photovoltaic power system at the time of being struck by disaster such as lightning, the investigative study was conducted, and the FY 2000 results were reported. In the study of technology of lightning damage prevention, the following were carried out: test on electrical insulation characteristics of modules, test on lightning impulse current of modules, various simulation tests on lightning surge voltage, etc. As to measures for prevention of lightning damage of the photovoltaic power system, two cases of simulation tests were conducted: case in which the lightning over voltage was controlled by installing arrester in array or junction box; case in which the over voltage was controlled by connecting the line of D class ground of PV system and the line of B class ground of pole transformer. In both cases, the effect of reduction in lightning over voltage was confirmed. In the investigative study of the life of PV module, the following were studied: deterioration due to the glass damage of PV module, influence of hot spot phenomena in case small particles such as rubbish were put on the surface of the PV module integrated with construction material, influence of hot zone phenomena at PV module connection spots. (NEDO)

  13. Industrial and scientific technology research and development project fiscal 1997 commissioned by the New Energy and Industrial Technology Development Organization. Report on research and development of a brain type computer architecture `trial fabrication and high-level evaluation on chips for a large-scale artificial neural system` and on results of evaluation studies on the chips; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Nogata computer architecture no kenkyu kaihatsu `daikibo jinko shinkei kairo system yo chip no shisaku to kodo hyoka` chip hyoka kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to develop a brain type computer architecture, a brain mimic processor (BMP) has been developed (which was made in LSI in fiscal 1997), and studies are being made on developing its applications. Development has been made on an element in which linkage of one million cells with one thousand neural cells can be realized. Evaluation substrates mounted with the BMP, control software, and compilers were provided to 15 organizations including the National Research Institutes, universities, corporations, and other societies (for 19 themes) to evaluate capability of the LSI and its application development. All of the research organizations are using these items utilizing features of the LSI or the network for such purposes as learning, storage, recognition and control. The applicable theme may include infrared spectrum pattern recognition and domain division of document images using neural network functions. It can also include structural analysis of mass spectrum molecules, time series pattern recognition, location of corresponding points in images, estimation of moving images, satellite control, character recognition, short time storage, long-term association memory models, and invention process studies, all utilizing the functions of the BMP. 71 refs., 89 figs., 9 tabs.

  14. A morfometria e o estado trófico de um reservatório urbano: lagoa do Nado, Belo Horizonte, Estado de Minas Gerais Morphometry and trophic state of an urban reservoir: Nado Lagoon, Belo Horizonte, state of Minas Gerais, Brazil

    Directory of Open Access Journals (Sweden)

    Ricardo Motta Pinto-Coelho

    2002-05-01

    Full Text Available São descritas as características morfométricas de um pequeno reservatório, a lagoa do Nado. Trata-se de lago artificial raso, com 2,7 m e 7,6 m de profundidades média e máxima, respectivamente. A localização, no fundo de um pequeno vale, rodeado por vegetação de grande porte, elevada profundidade relativa (5,5% e bacia de acumulação de formato cônico (Dv = 1,07, indica uma alta estabilidade física da coluna de água. O tempo de retenção da água no reservatório, no período seco, foi de 78 dias e, no período chuvoso, de 2,1 dias. O presente estudo ainda apresenta a primeira carta batimétrica do reservatório. Finalmente, o estado trófico foi avaliado mensalmente, de setembro/99 a setembro/00, utilizando-se o índice de estado trófico (IET de Carlson. O reservatório foi considerado como meso-eutrófico ao longo do período de amostragem.This study presents the morphometric characteristics of a small urban reservoir: Nado Lagoon. It is an artificial, shallow lake with 2.7 m. mean depth and 7.6 m. maximum depth. It is located at the bottom of a relatively large valley, surrounded by tall trees, with high relative depth (5.5% and conical accumulation basin (Dv = 1.07, with a high water column physical stability. The reservoir mean retention time was 78 days during the dry season and 2.1 days during the rainy season. This study also presents the first bathymetric map of the reservoir. The reservoir trophic state was monthly evaluated from September 1999 to September 2000, through Carlson trophic state index (TSI. The results classify the reservoir as meso-eutrophic throughout the sampling period.

  15. FY 1998 Report on research and development project. Research and development of human-cooperative/coexisting robot systems; 1998 nendo ningen kyocho kyozongata robot system kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This R and D project is aimed at development of the human-cooperative/coexisting robot systems with high safety and reliability, capable of performing complicated works cooperatively and in a coexisting manner with humans in human working and living spaces, in order to help improve safety and efficiency in various industrial areas, improve services and convenience in manufacturing and service areas, and create new industries. The trend surveys cover humanoid robot systems, remote control systems and simulators, and the application surveys cover services for humans, basic humanoids and entertainment communication. The 1998 R and D efforts include research and development, fabrication and surveys for the following themes; (1) fabrication of robot platforms for supporting manual works, (2) development of surrounded visual display systems, (3) development of robot arm manipulation and force displaying systems, (4) development of a dynamic simulator, (5) development of a distributed software platform, (6) researches and development of computation algorithm for kinematic chain dynamics, (7) development of motion teaching system for multi-functional robots, (8) investigation of trends in robotics technology, and (9) researches and surveys of robot application. (NEDO)

  16. Research cooperation project on manufacturing technology supported by advanced and integrated information system through international cooperation (MATIC); Kan`i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To support the advancement of basic industries including machine industry in Asian countries, research cooperation has been conducted for developing the manufacturing technology supported by advanced and integrated information system suitable for actual circumstances of individual countries. For the automotive and the parts industries, it is significant for the preparation works of manufacturing in overseas factories to possess common information between Japan and overseas factories. In this project, a system is constructed, which can be used in industries surrounding automotive industry, such as parts and facility industries, as well as in the automotive industry. In FY 1996, a primary system has been developed, and the demonstration tests were carried out. For the home electric machine and the parts industries, the technology applicable to the design of printed board circuit was developed, and the catalog of electronic parts was constructed. In FY 1996, a preliminary prototype system of the electronic parts catalog system was designed and developed. For the textile and apparel industries, the EDI, exchange system of CAD/CAM data, and construction of data bank were investigated. 87 figs., 19 tabs.

  17. Survey report for fiscal 1998 on the survey and study on basic information needs for development of welfare goods; 1998 nendo fukushi yogu kaihatsu kiban joho needs chosa kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With an objective to make clear the basic information about aged and handicapped persons requiring welfare goods upon the development thereof, this survey performed a questionnaire survey to business entities performing design, development, improvement and fitting of welfare goods. The questionnaire survey selected 879 business entities involved in manufacture and sale of the welfare goods. The effective reply recovery rate was 19.3%. The questions had the data contents required by products classified into body dimensions, motion capability, sensory functions, and work capability, asking to state data contents required for each item, reasons for the needs, and data sources. The data source currently utilized reveals that most of the replied enterprises utilize data derived from the company's own measurements, developments and experiences. The contents thereof indicate that the data are too old, the data contents do not match the current situation, and no required data are available. In designing, developing and fitting the welfare goods, the required data may not necessarily be obtained, whereas improvement in the database is strongly desired. (NEDO)

  18. Research activities of hybrid ceramic ball bearings for turbochargers in research and development center, Koyo Seiko; Koyo seiko sogo kenkyusho ni okeru turbocharger yo ceramic tamajikuuke no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tanimoto, K. [Koyo Seiko Co. Ltd., Osaka (Japan)

    2000-05-20

    Silicon nitride ceramics developed at Hikari Seiko's General Technology Research Institute was applied for the first time in the world in 1998 to balls used in bearing for turbo chargers for commercially available passenger cars. This paper reports the summary thereof. Silicon nitride used in the ceramic ball bearing is a high quality ceramic material that uses yttrium oxide and aluminum oxide as sintering auxiliaries, and is treated with hot static water pressure and made denser. Characteristics of low density as compared to that of high-carbon chrome bearing steel used as the general bearing steel are as follows: bearing weight, and ball's centrifugal force under high speed rotation are reduced; its heat resistance makes use of bearing possible under elevated temperatures; and shared bondage reduces seizing due to running out of oil film when the bearing is rotated at high speeds. Thus, the material is well suitable for turbo chargers. Its rolling fatigue life exceeds that of the bearing steel, and it is made clear that the damage pattern is exfoliation similar to that in the bearing steel. A life test for the ceramic ball bearing showed a result exceeding the calculated life time. (NEDO)

  19. Report of the results of the fiscal 1997 survey. R and D of high efficiency clean energy vehicles; 1997 nendo chosa hokokusho. Kokoritsu clean energy jidosha no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of developing an automobile which keeps low pollution using petroleum substituting clean energy, decreases the running energy consumption to a half at least, and reduces the CO2 emission to less than a half of the conventional one at the same time, the R and D started in fiscal 1997. As to the study of a high efficiency hybrid power system, conducted were the prediction of fuel consumption performance of the system proposed, evaluation of element technology using hybrid simulator, evaluation experiment on a new hybrid vehicle, and grasp of overseas trends. In relation to the development of hybrid vehicles, the following were studied: methanol fuel cell loading hybrid vehicle, CNG engine loading hybrid vehicle, CNG ceramic engine loading hybrid truck, CNG lean burn engine loading hybrid truck, LNG engine loading hybrid bus, and DME engine loading hybrid bus. Besides, a survey on synthetic fuel and the related survey were carried out. 17 refs., 185 figs., 101 tabs.

  20. FY 1998 result report on the leading R and D of MGC ultra-high efficiency turbine system technology; 1998 nendo MGC chokokoritsu turbine system gijutsu sendo kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    One of the main subjects for further conserving energy by enhancing efficiency of gas turbine system for power generation, etc. is the heightening of operation temperature. The development is urgently needed of heat-resistant ultra-high temperature members which make high-reliable operation under ultra-high temperature possible. Therefore, an introductory study was made aiming at using MGC materials which does not reduce strength even at high temperature and also has plastic deformability as large-size structure members of gas turbine system for power generation use. In FY 1998, the following were studied: (1) basic study to get material design guidelines for making efficiency of MGC materials higher; (2) construction of the basic data for elucidating the manifestation mechanism of high temperature characteristics of MGC materials; (3) setting of gas turbine specifications which are to be the basis of study work in and after FY 1999; (4) setting of parameters to be evaluated, evaluation criteria, etc., and definition of the evaluation criteria for possibility of establishing an MGC ultra-high efficiency gas turbine system. (NEDO)

  1. Fiscal 1998 international research cooperation project. Research report on development of ultra-solid lubricant with cluster diamond; 1998 nendo kokusai kenkyu kyoroku jigyo seika hokokusho. Kurasuta diamond wo riyoshita kotai junkatsu fukugo zairyo no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Study was made on cluster diamond-dispersed composite materials to develop advanced ultra-solid lubricant. As for processing technology of such composite materials, study was made on the uniform mixing condition of cluster diamond and Cu or Cu-Sn alloy by mechanical milling. The fabricated composite powder was caked by vacuum hot compressive formation technique. The production process of composite materials composed of cluster diamond and TiO{sub 2} was also developed by using sol-gel technique. As for formation of a functional layer and development of micro- formation technology, the prototype forming equipment using radial extrusion process and the mould were designed and prepared. In the preliminary experiment only for matrix, study was made on working limit, material flow, fine recrystallization and working condition during working. The friction test result showed the antifrictional property of the cluster diamond-dispersed composite materials using Cu, Cu-Sn, Al, Al-Si as matrix. (NEDO)

  2. Base isolation system for earthquake protection and vibration isolation of structures. Part 12. ; Verification tests of composite rubber bearing. Tatemono no menshin boshin koho no kenkyu kaihatsu. 12. ; Konpojitto sekiso gomu no seino kakunin shiken

    Energy Technology Data Exchange (ETDEWEB)

    Iizuka, M.; Yasaka, A. (Kajima Construction Co. Ltd., Tokyo (Japan)); Yoshizawa, T.; Kasahara, Y. (Bridgestone Corp., Tokyo (Japan))

    1992-10-31

    A composite rubber bearing comprising a low damping rubber and 2 kinds of high damping rubber is designed to provide functions, with only a single unit, of vibration isolation, earthquake protection and inhibition of shaking by wind. It can protect buildings from small/medium to large scale earthquakes. A dynamic loading test is performed using a 200tf actual size model which is made on trial basis to study the dynamic characteristics of the composite rubber bearing and to obtain design data. The vertical and horizontal characteristics of the device satisfy the characteristic values established at the time of designing. The conventional design equation can be applied to evaluate the vertical rigidity of the rubber bearing which has multiple cavity holes. The relationships among equivalent shear modulus, equivalent damping coefficient, and shear strain of each rubber part are obtained as the basic data for the design and property estimation of the composite rubber bearing. The effect of axial load amplitude and load velocity on vertical properties and the effect of horizontal deformation amplitude and axial force level on the horizontal properties are investigated quantitatively. 4 refs., 13 figs., 4 tabs.

  3. Base isolation system for earthquake protection and vibration isolation of structures. (Part 10). ; Vibration isolation chracteristics of Toshin 24 Omori building. Tatemono no menshin boshin koho no kenkyu kaihatsu. 10. ; Toshin 24 Omori building no boshin seino ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Ando, K. (Kajima Corp., Tokyo (Japan))

    1991-10-31

    As a part of the development of base isolation systems for earthquake protection of structures, the result of railway vibration measurements was reported of a 9-story base-isolated building along a railway. Isolation characteristics of railway vibration were measured in several stages of construction for 2.5 years from planning to completion of the building to determine the followings; the difference between measured vibration isolation data and those estimated from vibration accelerations on the ground, the loss of vibration input into the building, the difference between vibration responses of the same floor in the intermediate stage and final stage of construction, and the effect of studs and dampers. As a result, although the base isolation system slightly multiplied 10-13 Hz components of vibration acceleration, it greatly reduced those at higher frequencies indicating to be effective preventive measures of solid sound. The estimated vibration isolation data well agreed with measured ones permitting to propose an estimation method. 11 refs., 19 figs.

  4. Fiscal 1997 report on the results of the international standardization R and D. Data format for rapid prototyping systems; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Sekiso zokei system yo data format

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Concerning the rapid prototyping (RP) system use new RP format and the related software, the paper promoted the international standardization in consideration of relationships with an international standard, STEP. RP, which is a technology to rapidly prototype a solid body based on the three-dimensional CAD data, is used in various fields of product manufacture, medical field, etc., and is expected to further expand its field of application. In this R and D, an international version of the RP software system developed for domestic use was developed, and at the same time a software was trially manufactured so that the data on STEP/AP203/CC5 and CC6 can be delivered to the system. Moreover, a plan on new AIC51X as the STEP/AIC suitable for PR was studied. Relating to these results, the paper conducted the publicity work to the persons concerned in RP in the U.S. and Europe, and also explained those at ISO/TC184/SC4 (STEP Conference). The PR use interface enabling highly rapid and accurate data processing reached to a stage of the international commercialization, and at the same time the study items were materialized for proposal of the new STEP standards suitable for RP. 18 refs., 80 figs., 12 tabs.

  5. Research report for fiscal 1998. Research concerning studies for development of thermochemical solar hybrid fuel production system; 1998 nendo chosa hokokusho. Netsukagakuteki solar hybrid nenryo seisan system no kaihatsu kenkyu ni kakawaru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A solar heat-aided system is investigated, in which CO2 is recycled, with methanol, dimethyl ether, etc., serving as carriers of the solar heat energy. In the evaluation of validity of the system as a whole, the system scale and economy and technologies necessary for the system were studied, which was to find out whether solar methanol production was commercially feasible in the sun belt. It was concluded that solar methanol was capable of competing against LNG (liquefied natural gas) in cost, that Japan was able to establish its own technologies for developing coal gasification solar reactors using overseas technologies for information, and that therefore such a system was technologically and economically valid. In the study of related technologies as is, surveys were conducted on coal gasification, natural gas reforming furnaces, methanol synthesis, dimethyl ether synthesis, light condensing technology, current state and cost of solar reactors, etc. Also investigated were the marketability of solar hybrid fuel, CO2 reduction efficiency, and the construction cost at the assumed site of construction (Australia). (NEDO)

  6. Load controlling walk aiding apparatus. Report on results of research and development on medical and welfare device technologies; Kaju seigyoshiki hoko hojo sochi. Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    This paper reports a load controlling walk aiding apparatus developed by the Technology Research Association and the Medical and Welfare Device Research Institute under a consignment from NEDO. The development was purposed for physically handicapped people with remarkably deteriorated leg functions. This apparatus consists of a body trunk section with reduced size and weight, a reciprocating mechanism to facilitate moving out of a free leg, a stay varying mechanism to vary leg lengths, driving power supply and controls. The apparatus has realized smoother reciprocal walking motions than with conventional walk aiding systems by having the leg length of a free leg contract and extend matching with walking rhythms when the free leg is moved out. This paper describes the apparatus by dividing it into the following items: the course of research and development works (basic plans, execution of the research and development works, corporations taking charges, organizations, and committees), summary of the research and development (the summary of the developed system, and results of the walking tests), achievements (comparison of the targeted specifications with the results, practical usability, and commercial production), publicization of the research and the state of patent acquisition. 16 figs., 7 tabs.

  7. Fiscal 1997 report on the results of the international standardization R and D. International standards for computers/manikins; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Computer manikin ni kansuru kokusai hyojun kikaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Through the development of computer manikins (CM) which assess human adaptability to products and environments, a draft for international standardization was worked out to propose to ISO. A draft for the international standardization was presented to ISO through a development of `a structure model` changing based on human attributes, a study of `a motion model` enabling changes in posture and movement, a study of `an evaluation model` evaluating attainment ranges and ecodynamic loads, and a development of `computer functions` realizing the above-mentioned functions. The development of CM having the following characteristics: a function to reproduce `the structure model` based on the ISO7250 human body dimensional measuring values which were regulated in items for the human body dimensional measuring, a function to change posture/movement based on the joint movable range data, a function to evaluate geometrical human adaptability such as attainment ranges. As a plug-in to Autodesk Mechanical Desktop 2.0, the above-mentioned functions were realized, and the modular structure platform was constructed which enables the wide-range cross-industry option and functional expansion by the advance of CM. 7 refs., 41 figs., 18 tabs.

  8. Fiscal 1997 survey report. Survey consigned to NEDO of the development of energy use rationalization home welfare equipment systems; 1997 nendo energy shiyo gorika zaitaku fukushi kiki system kaihatsu chosa. Itaku kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of constructing new home welfare equipment systems of an energy effective use type, an investigational analysis was conducted of characteristics of the structure of houses considered of aged people, characteristics of the use of home welfare equipment, etc. As to the subject on space warming/cooling, it was found that the hour of stay-at-home of the aged tends to be longer, and the hour to be required for warming/cooling is longer, that the aged gradually lose senses regarding the peripheral environmental temperature, and the temperature to be considered should be at warmer/cooler levels, and that they are weak in heat shock, and the space of house where the temperature is uneven should be removed. Further, from the study in each welfare techno-house, possibilities were pointed out of further energy conservation in houses considered of the aged and home welfare equipment systems like the weight reduction of home welfare equipment systems and reduction of stand-by power, high air-tightness/high thermal insulation of houses for the aged, use of waste heat from air conditioners, introduction of solar energy to stand-by power and electrically-driven wheel chairs. 257 figs., 89 tabs.

  9. FY 1998 annual report on the research and development of techniques for creation of optically functional materials for information communications; 1998 nendo joho tsushin'yo hikari kino zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This R and D program is aimed at advancing techniques for creation of optically functional materials for information communications through research and development of the processing techniques for optically reactive, multi-functional waveguides, in which three-dimensional optical writing is used, and materials for optical devices. For creation of novel, light-responding materials, possibility of formation of micro regions of different refractive index is confirmed, with NaO-TeO{sub 2}-based glass (tellurite-based glass doped with cobalt oxide to enhance light absorbing efficiency) as the standard composition. For preparation of planar Bragg diffraction lattices composed of a transparent, electroconductive material, these lattices are successfully developed by a combination of optical crystallization of amorphous ITO with the aid of eximer laser, irradiation of the laser beams via a phase mask and chemical etching. For development of light-storing materials, green, long after-glow fluorescence is successfully realized by combining CaO-Al{sub 2}O{sub 3}-based glass, molten and reduced in a carbon crucible, with Tb{sub 3}+. (NEDO)

  10. Fiscal 1997 report on the results of the research on the development of high-performance industrial furnaces. Volume 3; 1997 nendo seika hokokusho (koseino kogyoro no kaihatsu ni kansuru kenkyu seika hokokusto)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A R and D was conducted for the purpose of developing remarkable energy conservation/CO2 reduction technologies. In fiscal 1997, the five working groups about the following were formed to have animated discussions: the basic research, heating furnace, heat treatment furnace, melting furnace, and tubular heating furnace. The research subjects are the pursuit/deepening of the base study on flame structures in high temperature air combustion, critical heat recovery of the system in high temperature air combustion, examination of the basic common technology on the ultimate optimization of the material heat transfer, construction of general-purpose experimental database, setting-up of design standards for general-purpose high-performance industrial furnaces, presentation of examples of the actual trial design based on the design standards and feasibility study of the practical application, preparatory support of the field test project on high-performance industrial furnaces for commercialization/diffusion/spread, etc. Further, how to arrange the developmental results was studied to make the results of the project useful for study of the prompt commercialization. 442 refs., 1444 figs., 311 tabs.

  11. Preprint of the results of `the publicly applied proposal type and hi-tech (emphasized) field research and development in fiscal 1995`; `1995 nendo teian kobogata saisentan (juten) bun`ya kenkyu kaihatsu` seika hokokukai yokoshu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    The preprint was prepared of a report meeting for the results of `the publicly applied proposal type and hi-tech (emphasized) field research and development in fiscal 1995` to be held in Tokyo during February 12 to 14, 1997. In the meeting, a lecture titled `The system of fundamental researches and its execution` is to be given as a special lecture and the following are as general lectures: `Energy/environmental technology and next generation catalysts,` ` The present and outlook of surgery in the 21st century - computer surgery,` The present situation of education and research related to the design of digital integrated systems,` and `The present and future of research and development of a new carbon material, fullerene.` Research reports were prepared by field as follows: 73 papers in the new material technology field, 46 in the bio-technology field, 36 in the electronics/information technology field, 8 in the mechanical system technology field, 8 in the human life engineering technology field, 23 in the medical/welfare equipment technology field, 5 in the resource technology field, 17 in the energy/environment technology field.

  12. Fiscal 2000 achievement report on the research and development of medical and welfare apparatus/technology. Computer assisted analysis system for medicinal compounds; 2000 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Iyo kagobutsu screening shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    Studies were conducted about a system for assisting the selection and structural development of optimum compounds out of those found in numbers during the process of high throughput screening: by the method of compound classification, molecular superposition, virtual receptor mapping, or the like, with the structure unknown of the target protein; by the method of protein structure modelling, docking study, or the like, with information available on the structure of the target protein. In the construction of a compound database, the program prepared in the preceding fiscal year was improved. In the development of a method for compound classification, the amount of required memory was reduced for example by limiting the functions to the classification of frequently used frames. Concerning side chains in protein structures in the stereo-structure modelling of proteins, programs were developed, installed, and tests were performed by calculation. In developing the total system, tests were conducted by putting real data into graphical interfaces for compound classification and molecular superposition. (NEDO)

  13. FY 1996 Report on the industrial science and technology research and development project. R and D of brain type computer architecture; 1996 nendo nogata computer architecture no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    It is an object of this project to develop an information processing device based on a completely new architecture, in order to technologically realize human-oriented information processing mechanisms, e.g., memory, learning, association of ideas, perception, intuition and value judgement. Described herein are the FY 1996 results. For development of an LSI based on a neural network in the primary visual cortex, it is confirmed that the basic circuit structure comprising the position-signal generators, memories, signal selectors and adders is suitable for development of the LSI circuit for a neural network function (Hough transform). For development of realtime parallel distributed processor (RPDP), the basic specifications are established for, e.g., local memory capacity of RPDP, functions incorporated in RPDP and number of RPDPs incorporated in the RPDP chip, operating frequency and clock supply method, and estimated power consumption and package, in order to realize the RPDP chip. For development and advanced evaluation of large-scale neural network silicon chip, the chip developed by the advanced research project is incorporated with learning rules, cell models and failure-detection circuits, to design the evaluation substrate incorporated with the above chip. The evaluation methods and implementation procedures are drawn. (NEDO)

  14. Study on synergistic effects of urban mixed-uses developments. Research into the complex uses of offices, shopping centers and hotels; Toshi kaihatsu no yoto fukugo ni yoru sojo koka no kenkyu. Office shogyo shisetsu hotel no fukugo riyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    Mori, N.; Ito, T. [Kajima Corp., Tokyo (Japan)

    1995-12-20

    Complex facilities consisting of offices, shopping centers and hotels were investigated to discuss synergistic effects of compounding the different uses. The investigations included an investigation on passing behaviors and traffic amount among facilities of different uses around and inside the complex facilities, a questionnaire survey on visitors for their composite utilization, impression and evaluation of the facilities and another questionnaire survey on office workers for their composite utilization of the facilities inside and outside the complex facilities. The result of analyses using simple calculations and multi-dimensional measure methods revealed the following points: improvement on images of the whole facility as a result of strong customer collecting power of the commercial facilities, support effects on hotels and malls, roles and utilization patterns of commercial facilities, hotels and various facilities existing in peripheral areas that function to support office works, and roles of open squares and malls that coordinate and integrate the facilities of different uses and promote passing activities. It was also observed that resident time is extended as a result of composite utilization, and that the shift in peak time of the number of people utilizing the commercial-based and office-based facilities results in more efficient utilization of parking lots and restaurants. 1 ref., 9 figs., 2 tabs.

  15. Achievement report for fiscal 1998. Research and development of ceramic gas turbine (Reliability verification test for ceramic members); 1998 nendo ceramic gas turbine no kenkyu kaihatsu seika hokokusho. Ceramic buzai no shinraisei kakusho shiken

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    For a ceramic gas turbine to achieve efficiency of 42%, materials capable of withstanding approximately 1300 degrees C are required. In fiscal 1998, the mechanism of creep deformation and life prediction are studied, with specimens exposed to a short-term high-stress conditions equivalent to a time to fracture of 1000h. It is known after studies in the past that, under a stress of approximately 240Mpa, the logarithmic values of the load stress and time to fracture may be described by two differently inclined straight lines. Strain is accurately measured by use of a CCD camera for the determination of a creep curve, and then stress indexes are worked out. It is then found that the stress indexes are 4 on the lower stress side of 260MPa and 11 on the higher stress side of the same. This enables the extrapolation of short-term creep fracture data for the prediction of long-term life. No large-scale reduction in resistance to creep due to changes in the crystal phase is not predicted. Longitudinal sound wave speeds are measured, and the result manifestly describes how the longitudinal sound wave speed slows down with the progress of creepage in the material. Reference is also made to international reports about the study of ceramics performance tests and evaluation methods, international joint studies about mechanical properties tests, and the international round robin test of material powder. (NEDO)

  16. Manufacturing technology supported by advanced and integrated information system through international cooperation in fiscal 1995; Kan`i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Informatization using mainly computers is more and more important contributing to the upgrading in society, economy and a variety of fields. As to informatization in developing countries, however, there has still been few to be seen. Accordingly, gaps are getting larger between developing countries and developed countries where informatization is acceleratedly advanced. In the light of such actual state, Center of the International Cooperation for Computerization (CICC) contracted with NEDO and promoted a project `Manufacturing technology supported by advanced and integrated information system through international cooperation.` This is a project to study jointly with five Asian countries with which NEDO made a basic contract, China, Indonesia, Malaysia, Singapore and Thailand. Working group is set up for each theme such as automobiles/parts, electric home appliances/parts, and fiber/apparel, to study the construction of a model house and the design of a system. In fiscal 1994, the field survey was conducted, and in fiscal 1995 the system design was started. 16 figs., 1 tab.

  17. Fiscal 2000 achievement report on the research and development of medical and welfare apparatus/technology. Home rehabilitation system for aphasia patients; 2000 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shitsugosho zaitaku rehabilitation shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    In the effort to develop an authoring system for assistance programs, a self-training system to enhance home rehabilitation, a remote rehabilitation evaluation/diagnosis supporting system, and a communication assisting system, the systems developed in the preceding fiscal years were customized and, together with their operation manuals, introduced to seven hospitals and subjected to evaluation. The results were analyzed, and improvement centering on the ease of operation was carried out. Various development efforts were exerted to improve on what were strongly demanded. As for the aphasiac/caregiver interface, it was distributed to every hospital concerned. There was a demand for immediate introduction, and then the interface was developed into a practical tool to satisfy the demand. This enabled aphasiac patients to receive training stimuli effectively through various sense organs. (NEDO)

  18. Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Home rehabilitation system for aphasia patients; 1999 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shitsugosho zaitaku rehabilitation shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    Element technologies under development involve (1) an authoring system for assistance program processing, (2) self-training system for supporting home rehabilitation, (3) human interface for aphasia patients and caregivers, (4) remote rehabilitation evaluation and diagnosis supporting system, and (5) a communication assisting system. Under item (1), a material incorporating interface, training contents layout and combination function, and general-purpose interface specifications are determined, and a one-piece system is designed and developed. Under item (2), a self-training player that behaves in compliance with the authoring specifications is designed and developed. Under item (3), a secondary unit is fabricated on the assumption of its use at an actual treatment scene. Under item (4), remotely controlled two-way face-to-face communication, camera control, shared operation of a training player, training scenario transfer component, etc., are developed and, furthermore, a one-piece system is designed and developed to support the therapist's rehabilitation assessment and diagnosis in coordination with the above-mentioned remotely controlled functions. Under item (5), a network communication component and an auxiliary function using voice synthesis are added for designing and developing a one-piece system that enables long-distance communication between the therapist and patients. (NEDO)

  19. FY 1998 annual report on the study on development of corrosion-resistant ceramic materials for garbage incinerators; 1998 nendo gomi shori shisetsuyo taishoku ceramics zairyo no kaihatsu ni kansuru kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Described herein are the FY 1988 results of development of corrosion-resistant ceramic materials for garbage incinerators. Residue released when porcelain stocks are collected is selected as the inexpensive stock for SiO{sub 2}-Al{sub 2}O{sub 3}-based refractory materials. It is incorporated with carbon black and reduced at 1,200 to 1,500 degrees C in a nitrogen atmosphere. Synthesis of the target Si-Al-C-N-O-based compound succeeds in the presence of a solid catalyst, but it is a fine powder, and hence that of the massive compound fails. The commercial ceramic materials and new refractory materials, made on a trial basis, are evaluated for their resistance to corrosion using fry ashes collected from a commercial incinerator. These ashes are higher in melting point, more viscous, holding a larger quantity of attached slag and more corrosive than synthetic ashes. These materials are corroded acceleratedly as temperature increases to 1,200 degrees C or higher, more noted with the ceramic materials than with the refractory materials. Oxidation and melting characteristics of the molten slag affect corrosion of some materials. Use of the graphite-based material shall be limited to a section below the slag surface, where graphite is oxidized to a smaller extent. The MgO-based material is promising. The Al{sub 2}O{sub 3}-Cr{sub 2}O{sub 3}-based material is more promising than any other material developed in this study. Their bending strength before and after the corrosion test is measured at normal temperature to 1,700 degrees C, to investigate their deterioration by high temperature and corrosion. (NEDO)

  20. Studies on physicochemical mechanism of hot water injection. ; Studies on optimum production technique of geothermal fluid. Nessui no seisan kangen ni kansuru kenkyu. ; Nessui no saiteki seisan shuho no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, H.; Takahashi, M.; Hanano, M.; Hirako, Y. (Japan Metals and chemicals Co. Ltd., Tokyo (Japan)); Itoi, R. (Kyushu Univ., Fukuoka (Japan). Faculty of Engineering)

    1990-10-31

    In order to appropriately produce geothermal fluid, evaluation method was developed of reservoir, at each of the survey, development and production stages, as a serial part of Sunshine Project by the NEDO. For the production of thermal water and steam from the reservoir, evaluation must be appropriately and flexibly made of, among others, geothermal fluid supply capacity from the surroundings, interval between wells, against-time ratio of lowering in production well capacity, number of production wells, influence of reduced thermal water, and location and ratio of reduction. At the survey stage, it is good to generally analyze information, as also not voluminous, by a lumped parameter model. At the development stage from drilling as far as the production of thermal water, it is good to use a grid model, able to take the fracture, as well as the two-dimensional and three-dimensional distributions, into a particular consideration. Regarding how to make the grid division, the model comprises the wellfield model, to express one drilled well as one grid in locative region, of which the surroundings are to be divided by blocks, and well-by-well method, to locate one drilled well at one grid. At the production stage, data on well-by-well basis are important and the well-by-well method is accordingly the most important. 3 refs., 6 figs., 3 tabs.

  1. Politics of water resources and environmental problem. US-Japan comparative policy history on the public district; Mizushigen kaihatsu to kankyo mondai. Public district no Nichibei hikaku seisakushi kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Mikuriya, T. [Tokyo Metropolitan University, Tokyo (Japan). Faculty of Engineering

    1994-12-15

    With an objective to give some suggestion to the water resources policies for the future Japan, a comparative study was made on the water resources development policies in Japan and the water resources policies in the state of California, U.S.A. The study on Japan has been proceeded empirically based on specific data with regard to the development of electric power policies from the prewar to postwar times when the governmental electric power control was changed to incorporation of the nine electric power companies. The change may be identified from viewpoints of both profit and ideology. Noticing the `public corporations` established one after another for social capitals before and after the establishment of the Liberal Democratic Party, their relation with the water resources development policies was pursued in terms of actual proof and political science. The identity of the public corporations established in and after 1955 stands on the premise of free economy, rather than the controlled economy. This paper positions the water resources development policies in a broader context as the national land plan, and considers the problems that are expanding from flood damages, dam construction, industrial complex construction to environmental problems around the water. Comparative discussions on the Tone river system and the Colorado river system were left as the future assignment.

  2. FY 1998 annual summary report on research and development of hybrid pulse plasma coating (HPPC) system (first year); 1998 nendo hybrid gata pulse plasma coating (HPPC) system no kenkyu kaihatsu seika hokokusho. Daiichinendo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The R and D program was implemented for a hybrid pulse plasma coating system, where organometallic gases as the feed gases were selected, and methods for feeding them and treating the exhaust gases to remove organic metals were studied, as the preliminary steps for the pulse introduction tests. The tests of combining an rf plasma with microwaves and pulse plasma generation have been started. The power source characteristics, e.g., pulse width, voltage and current, were analyzed, and high-voltage pulse voltage application tests were conducted, in order to grasp the power source characteristics related to the pulse voltage application. Generation of high-density plasma has been confirmed by the tests with microwaves absorbed by an rf plasma, and the plasma density measurement has been started using the single probe and double probe methods. It is also confirmed that a pulse voltage can be applied to a high-density plasma. A plasma source type ion injector (PSII) has been made on a trial basis, to collect the data for the injector. (NEDO).

  3. Fiscal 1997 report on the results of the research on the development of high-performance industrial furnaces. Volume 2; 1997 nendo seika hokokusho (koseino kogyoro no kaihatsu ni kansuru kenkyu seika hokokusto)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A R and D was conducted for the purpose of developing remarkable energy conservation/CO2 reduction technologies. In fiscal 1997, the five working groups about the following were formed to have animated discussions: the basic research, heating furnace, heat treatment furnace, melting furnace, and tubular heating furnace. The research subjects are the pursuit/deepening of the base study on flame structures in high temperature air combustion, critical heat recovery of the system in high temperature air combustion, examination of the basic common technology on the ultimate optimization of the material heat transfer, construction of general-purpose experimental database, setting-up of design standards for general-purpose high-performance industrial furnaces, presentation of examples of the actual trial design based on the design standards and feasibility study of the practical application, preparatory support of the field test project on high-performance industrial furnaces for commercialization/diffusion/spread, etc. Further, how to arrange the developmental results was studied to make the results of the project useful for study of the prompt commercialization. 442 refs., 1444 figs., 311 tabs

  4. International joint development for demonstration by NEDO. `Research for demonstration of a solar power/micro hydro power bybrid system`; NEDO kokusai kyodo jissho kaihatsu `taiyoko micro suiryoku hybrid system jissho kenkyu`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-10

    As part of the international joint development for demonstration by the New Energy and Industrial Technology Development Organization (NEDO) in fiscal 1997, a `research for demonstration of a solar power/micro hydro power bybrid system` was commissioned. A hybrid system was structured, which consists of a 100-kW class photovoltaic power generating equipment, a 25-kW class micro-hydro power generating equipment, and a battery set to store surplus power. Construction for system installation to perform demonstration operation was launched in Trang Village, Nang Yang Prefecture, Vietnam. This demonstration research is scheduled to execute system design and fabrication as well as the foundation construction for system installation in fiscal 1998, and the installation and adjustment will be completed by some time in the summer of 1999. Thereafter, demonstration operation will be performed for about two years with an objective to evaluate complementary relationship between the photovoltaic power generation and the micro-hydro power generation, the system economy, and electric power quality. (NEDO)

  5. International joint development for demonstration by NEDO. 'Research for demonstration of a solar power/micro hydro power bybrid system'. NEDO kokusai kyodo jissho kaihatsu 'taiyoko micro suiryoku hybrid system jissho kenkyu'

    Energy Technology Data Exchange (ETDEWEB)

    1999-01-10

    As part of the international joint development for demonstration by the New Energy and Industrial Technology Development Organization (NEDO) in fiscal 1997, a 'research for demonstration of a solar power/micro hydro power bybrid system' was commissioned. A hybrid system was structured, which consists of a 100-kW class photovoltaic power generating equipment, a 25-kW class micro-hydro power generating equipment, and a battery set to store surplus power. Construction for system installation to perform demonstration operation was launched in Trang Village, Nang Yang Prefecture, Vietnam. This demonstration research is scheduled to execute system design and fabrication as well as the foundation construction for system installation in fiscal 1998, and the installation and adjustment will be completed by some time in the summer of 1999. Thereafter, demonstration operation will be performed for about two years with an objective to evaluate complementary relationship between the photovoltaic power generation and the micro-hydro power generation, the system economy, and electric power quality. (NEDO)

  6. FY 2000 report on the results of the R and D of the fusion domain. Volume 2. Chemo-intelligence; 2000 nendo yugo ryoiki kenkyu kaihatsu. 2. Kemo intelligence

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of developing materials with excellent functions by design/synthesis of molecules/molecular aggregates with biological functions, study was made, and the FY 2000 results were reported. In the basic study of intermolecular interactions, analysis was made of the directional dependence of hydrogen bond, CH-(pai),NH-(pai) and OH-(pai) interactions. In the study of the design and synthesis of macrocyclic host molecules, a method for phased change of ether oxygen to OH group was found out, and new macrocyclic host molecules with 3 or 4 hydroxy groups were obtained. In the study of the synthesis and properties of ligands for synthesis and functional development of metal complexes, compounds having both phenolic hydroxy groups and benzoxazole moieties were synthesized by the Claisen rearrangement. In the study of the structuring of novel supermolecular systems, it was found out that 25-membered ring crownophane made super-molecule with pseudorotaxane by reaction with organic ammonium salts. (NEDO)

  7. Fiscal 1998 research report. Industrial science and technology research project / R and D on accelerative construction technology of bio-functions; 1998 nendo kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project aims at establishment of new basic biotechnology by preparing an artificial variation/selection system in a laboratory based on the molecular level information on bio-evolution mechanism. This report summarized the fiscal 1998 results. For analysis of the experimental system for in vitro evolution of protein molecules, it is necessary to make adaptive walk efficient based on the obtained feature information of a fitness landscape. The fitness landscape was studied using the heat resistance and specific activity of LOD (lactate oxidase) as fitness, and a practical system for screening clones was established. A crone superior in heat resistance and specific activity was obtained by repeating random variation, effective amino acid substitution and screening. Cystatin B is a specific inhibitor of cysteine protease (including Cathepsin K). Improvement of a specificity of Cystatin B to Cathepsin K was attempted by partially substituting its amino acid sequence. In the case of cysteine where two amino acid residues for mutation are linked closely, a mutant activity was additive to amino acid substitution. (NEDO)

  8. Achievement report for fiscal 1998. Research and development of super-functional environment-resistant materials by controlling trace metal ion implantation; 1998 nendo seika hokokusho. Gokubiryo kinzoku ion chunyu seigyo ni yoru chokino taikankyo zairyo no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim was to develop reliable materials high in resistance to hostile environments, greatly improved in their resistance to oxidation, abrasion, and corrosion at high temperatures. To achieve the goal, trace quantities of high melting point metals were implanted into the compound formed on the substrate surface or deep into the substrate material. This year's research and development is outlined below. Important technologies in the ion process involved materials which at high temperatures were very resistant to oxidation, abrasion, and corrosion. The high-temperature oxidation resistant material was studied for use with the automobile supercharger rotor. The study on the high-temperature abrasion resistant material involved Ti-N thin coatings: the optimization of coating conditions, slidability at room temperature, and slidability in a high-temperature atmosphere. As for the high-temperature corrosion resistant material, studies were made to use it for refuse-fueled power generation. The TiAl material was also studied: the effect of ion implantation on the improvement of its high-temperature oxidation resisting capability, analysis into oxidized alloy surface properties, ion implantation into complicatedly shaped items and the optimum material for them, and the surface treatment by ion beams for improving resistance to high-temperature corrosion. (NEDO)

  9. FY 1998 annual report on the study on development of superhigh-temperature optomechanical composite materials; 1998 nendo chokoon oputo mechanical fukugo zairyo no kaihatsu ni kansuru kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Described herein are the FY 1998 results of the studies on validating possibility of superhigh-temperature optomechanical composite materials, transparent in the visible to infrared wavelength region and having excellent mechanical properties, and possibility of producing practical matrix materials and considerations for their production. For development of the production processes, a composite of glass matrix reinforced with oxynitride glass fibers is investigated, where the matrix having a refractive index differential with the fibers of 10{sup -3} is selected. The composite is prepared by hot pressing the matrix powder put between the fiber bundles. Analysis of its light transmittance and mechanical properties indicates that the method is an optimum one for producing the optomechanical composite material. For creation of the heat-resistant, light-transmitting ceramic matrices needed for commercialization of the composite materials, an MgO-Al{sub 2}O{sub 3} spinel-based system is selected, for which the production process is investigated. It is found that the material light-transmittable in the visible to infrared wavelength region can be produced by hot pressing a hot-pressed MgO-Al{sub 2}O{sub 3} ceramic material. (NEDO)

  10. Achievement report for fiscal 1996 on the research and development of human sensory measurement application technology. 2. Subject; 1996 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 2. Honronhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In relation with fatigue indexing basics in the study of physiological sensation indexing technologies, an indexing system prototype is built, covering muscular fatigue due to a restrained working attitude and mental fatigue due to the load of psychological activities. Features of each fatigue/alertness stage are analyzed, and the time-dependent correlations between the change in psychological quantities and the combined physiological change is also analyzed. In the study of environmental compatibility indexing, color temperatures of office interior, amenity, and spatial dimension indexing are taken up. The impression of office space is analyzed. Highly reliable technologies in pursuit of psychological sensation are established, and efforts are made at indexing environmental compatibility by analyses of physical quantities affecting psychological sensation, and of brain waves. Test methods for habituation to noise are discussed, and relations between the sensations of habituation and fatigue/obstruction are quantified. In relation with product compatibility indexing technologies, products' compatibility with operator's attitude, the line of sight, and loads on human beings is evaluated. Discussed also is the application of the indices involving physiological sensation, environments, and product compatibility to products for daily life and to the designing of living and working environments. (NEDO)

  11. Achievement report for fiscal 1996 on the research and development of human sensory measurement application technology. 1. Outline; 1996 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In the study of basic technologies for indexing the degree of fatigue, an indexing system prototype is constructed, involving muscular fatigue due to a restrained working attitude and mental fatigue due to psychological activities. A small oxygen meter is completed and evaluated, capable of quantifying intracorporeal oxygen. In the study of fatigue/alertness standardization, a common-use subjective evaluation method is utilized for scaling mental activities load and local physical load, and physiological data are accumulated. An analysis is conducted into the features of each of the fatigue/alertness stages, and time-dependent correlations are analyzed between the changes in fatigue/alertness-related psychological quantities and the combined physiological changes. In the study of environmental compatibility indexing, the comfort of an office space is indexed by use of technologies for determining psychological sensation. Relative to noise, relations between the sensations of habituation and obstruction are quantified. Conversion into indices of friendliness of products toward workers (relative to working attitude, line of sight, etc.) is also mentioned. Some applications of the physiological sensation index and environment/product compatibility index for the establishment of index systems for household commodities and living/working environments are discussed. (NEDO)

  12. Result of R and D of medical welfare equipment technology in fiscal 1994. Part 6. Therapeutic training system for preventing incontinence of urine; Iryo fukushi kiki gijutsu kenkyu kaihatsu 1994 nendo seika hokokusho. 6. Nyoshikkin boshi kunren sochi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    A portable system was developed so as to prevent the urinary incontinence and enable the aged persons and patients to live their comfortable life. In the measurement of urinary volume, its correlativity with the change in impedance was confirmed with a small and light-weight prototype. As a result of improvement of the ultrasonic method, the measurement accuracy was heightened with miniaturization. The usefulness and safety could be clinically confirmed in the urination control by electric stimulation. Based on the above element technologies, the total system was then studied by interlinking the intravesical urinary volume measurement system and urination control system. Particularly for the patients of urgent urinary incontinence, an in vitro test was conducted with a system into which the electric stimulator was integrated. As a result, this system was good as a nursing system. Through an animal experiment on iontophoresis, the urination was known to be controllable with skin-permeating drugs. However, it was known that those drugs are pharmaceutically classified into the new DDS group by the Drugs, Cosmetics and Instruments Act. Therefore, the clinical application plan was partially revised for the present system using them and made to be a subject of future study.

  13. Research cooperation project on manufacturing technology supported by advanced and integrated information system through international cooperation (MATIC); Kan`i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To support the advancement of basic industries including machine industry in Asian countries, research cooperation has been conducted for developing the manufacturing technology supported by advanced and integrated information system suitable for actual circumstances of individual countries. For the automotive and the parts industries, it is significant for the preparation works of manufacturing in overseas factories to possess common information between Japan and overseas factories. In this project, a system is constructed, which can be used in industries surrounding automotive industry, such as parts and facility industries, as well as in the automotive industry. In FY 1996, a primary system has been developed, and the demonstration tests were carried out. For the home electric machine and the parts industries, the technology applicable to the design of printed board circuit was developed, and the catalog of electronic parts was constructed. In FY 1996, a preliminary prototype system of the electronic parts catalog system was designed and developed. For the textile and apparel industries, the EDI, exchange system of CAD/CAM data, and construction of data bank were investigated. 87 figs., 19 tabs.

  14. Survey report of FY 1997 on the global environmental industry technology development promotion project. International research exchange project; 1997 nendo chosa hokokusho. Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo (kokusai kenkyu koryu jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Exchange of personnel among foreign research organizations is significant for promoting research and development to create new research fields and to build new technological systems for the purpose of solving global environmental problems. For this purpose, researchers were sent/invited to/from international conferences and international symposiums related to global environmental technology and exchange of personnel with major foreign research organizations and universities was conducted under the cooperation of RITE and RITE-related researchers and related academic societies. Based on short-term invitation and sending of researchers as well as the feasibility study of researcher exchange, researchers were sent/invited on long- and mid-terms. As a result, exchange of personnel engaged in the latest research in Japan and overseas could be promoted. It was found that various researches are being conducted abroad in basic areas of global environmental technology. Since they are closely related to the research and development of industrial technology contributing to global environmental preservation promoted by RITE, it is important to establish a more efficient exchange system of researchers in the future. 91 refs., 38 figs., 14 tabs.

  15. Report on result 1998. Research and development on fusion area. Part 3 (biomolecular mechanism and design); 1998 nendo seika hokokusho. Yugo ryoiki kenkyu kaihatsu daisan bunsatsu (bimolecular mechanism and design)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    An organism is a molecular mechanical system consisting of nucleic acid, peptide and protein having a self-forming and a self-repairing function. For the purpose of creating cells, tissues and molecular mechanism alternating these biological functions, their basic technology was developed. Concretely, studies were made on three-dimensional cellular structural module engineering and biomolecular mechanism and design. Studies on biological soft tissue resulted in success by giving atmospheric glow discharge treatment to the inner surface of a tubular PVC. An artificial vitreous body was created using PVA hydrogels. In addition, liver cells were successfully cultured for the first time in the world. Studies on biological hard tissue revealed that osteopontin plays a role of a trigger for the initial differentiation of the osteoblast cell. Further, a basic experiment was carried out on the initial response of the cartilage cell. In the research on the molecular mechanism, examination was made on the mechanism of a double-head molecular motor. Examination was also made on the adjustment of the hydrogenase LB film as an electricity/hydrogen energy conversion element and on the biomolecular mechanism and design. (NEDO)

  16. FY1995 study of standardization of biocompatibility test for development of continuous flow artificial heart; 1995 nendo renzokuryugata jinko shinzo kaihatsu to seitai tekigosei shiken hyojunka ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the development of continuous flow artificial heart, the purposes of this study are confirmation of species difference in hemolysis, development of LASER photometry for hemolysis and thrombogenesis, immunological investigation of platelet function during nonpulsatile pumping and development of adequate microcapsule system for the simulation of hemolysis. The relative liabilities of red blood cells of 3 kinds of animals to the same shear stress are; human; 1.0, ovine; 1.75, bovine; 0.22.For comparison of pump systems, therefore, the species difference in hemolysis should be considered. Laser light intensity gradually increased with hemolysis during nonpulsatile perfusion. On the other hand, the intensity abruptly decreased on thrombus formation. From these findings, it becomes possible to monitor processes of hemolysis and thrombogenesis dynamically and non-invasively. As the laser photometry is able to be utilized not only for in vitro study but also for in vivo study, it becomes efficient monitoring system. Immunological examination of platelet function revealed that GMP-140 and MP are the most sensitive parameters to detect the interaction between platelets and nonpulsatile blood pump. The development of microcapsule system for simulation of hemolysis study is still in progress. By application of the results of these studies, it also becomes possible to conduct more efficient and reliable research for the development of continuous flow artificial heart. (NEDO)

  17. Research report for fiscal 1998. Research into the feasibility of exchange of studies for the development and promotion of global environment-related industrial technologies; 1998 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The above was conducted by Research Institute of Innovative Technology for the Earth (RITE). Worldwide collaboration is mandatory for the settlement of environmental problems for the earth, and RITE is positively promoting its interaction with research institutes abroad. In fiscal 1998, it sent research teams to government organizations and research institutes in Europe and America for studies there. A study in Europe involved the preparation of chemicals from CO2 by virtue of novel biotic reactions, and RITE's microbial molecular function laboratory plans to start a leading study in fiscal 1999. In relation with environmental impact reducing technologies using sunlight-aided photocatalysts, visits were paid to three research institutes in America. RITE itself has developed a powdered semiconductor catalyst and is engaged in the study of producing hydrogen by decomposition of water using solar energy. Concerning the production of saccharides out of farm wastes remaining unused, researches were made into the feasibility of joint studies with some advanced research institutes in America. Discussions were made about the performance- and stability-related improvement of enzymes usable for the decomposition of biomass, the analysis of biological environmental circumstances that substance yielding microbes find themselves in under anaerobic conditions, etc. (NEDO)

  18. Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Unified system of diagnosis and treatment for heart diseases; 1999 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shinshikkan shindan chiryo togo shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    The items to be subjected to research and development are (1) technology of surgical operation support by a maneuverable manipulator system, (2) shape change compensation technology, (3) high speed 3-dimensional ultrasonic measurement technology, (4) image processing technology, (5) surgical planning, and (6) intraoperative micro-manipulation support technology. This fiscal year, a conceptual design is prepared of the titled system by making the below-named studies. Before the examination of the items to be developed, the research and development program is divided into several phases, sample cases for the new system to treat and the techniques it will use at each phase are studied, and research and development policies for each element at each phase are deliberated. Under item (1), a study is made about the manipulator to operate under the MRI (magnetic resonance imaging) environment from the viewpoints of engineering and medicine. Under item (2), the shape and dimensions of a stabilizer and stabilizing method are studied for a conceptual design. Under item (3), the effect of the materials of a scanning probe on the MRI image is studied. Under item (4), a prototype software program is developed for image processing, and a study is made about techniques for correcting endoscopic image distortion. Under item (5), a concept design is prepared relative to the basic functions necessary for information display. Under item (6), a study is made about the concept design framework. (NEDO)

  19. Research and development of photovoltaic power system. Characterization and control of surface/interface recombination velocity of crystalline silicon thin films; Taiyoko hatsuden system no kenkyu kaihatsu. Silicon kessho usumaku ni okeru hyomen kaimen saiketsugo sokudo no hyoka to seigyo

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, H. [Hokkaido University, Sapporo (Japan). Faculty of Engineering

    1994-12-01

    This paper reports the result obtained during fiscal 1994 on characterization and control of surface/interface recombination velocity of crystalline silicon thin films. To optimize design and manufacture of solar cells, it is necessary to identify correctly resistance factor (or doping) of bulk of materials, bulk minority carrier life, and recombination velocity on surface, passivation interface and electrode interface. A group in the Hokkaido University has been working since a few years ago on development of non-contact and non-destructive photo-luminescence surface level spectroscopy (PLS{sup 3}). A new non-contact C-V method was also introduced. Using these methods, basic discussions were given on possibility of separate measurements on surface/interface and bulk characteristics of solar cell materials. The PLS{sup 3} method and the non-contact C-V method were used for experimental discussions on evaluation of silicon mono-crystalline and poly-crystalline materials. Discussions were given on separate evaluations by using the DLTS method. 10 figs., 2 tabs.

  20. Research and development of photovoltaic power system. Development of novel technologies for fabrication of high quality silicon thin films for solar cells; Taiyoko hatsuden system no kenkyu kaihatsu. Kohinshitsu silicon usumaku sakusei gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, T. [Kanazawa University, Ishikawa (Japan). Faculty of Engineering

    1994-12-01

    Described herein are the results of the FY1994 research program for development of novel technologies for fabrication of high quality thin films of silicon for solar cells. The study on the mechanisms and effects of chemical annealing reveals that the film structure greatly varies depending on substrate temperature during the hydrotreatment process, based on the tests with substrate temperature, deposition of superthin film (T1) and hydrotreatment (T2) as the variable parameters. Chemical annealing at low temperature produces a high-quality a-Si:H film of low defect content. The study on fabrication of thin polycrystalline silicon films at low temperature observes on real time the process of deposition of the thin films on polycrystalline silicon substrates, where a natural oxide film is removed beforehand from the substrate. The results indicate that a thin polycrystalline silicon film of 100% crystallinity can be formed even on a polycrystalline silicon substrate by controlling starting gas composition and substrate temperature. The layer-by-layer method is used as the means for forming the seed crystals on a glass substrate, where deposition and hydrotreatment are repeated alternately, to produce the thin crystalline silicon films of high crystallinity. 3 figs.

  1. Research and development of photovoltaic power system. Study of carrier dynamics in a-Si from optical and optoelectronic properties; Taiyoko hatsuden system no kenky kaihatsu. Amorphous silicon no koden tokusei to sono carrier dynamics no kogakuteki kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Hamakawa, K. [Osaka University, Osaka (Japan). Faculty of Engineering Science

    1994-12-01

    This paper reports the result obtained during fiscal 1994 on research on an optical study of optoelectronic properties of amorphous silicon and its carrier dynamics. Studies have been performed on elucidation of the optoelectronic conversion mechanism in an a-Si film p-i-n junction system and the relationship of the mechanism with the optoelectronic properties. In the studies, optically induced defect level distribution was evaluated by using the modulated optical current spectroscopy, and confirmation was made on model forecast and qualitative agreement, such as large increase in neutral defect levels in association with beam irradiation. In research on elucidation of a film forming mechanism for a-Si based alloys, and material property control, a high-sensitivity reflective infrared spectroscopy was used to observe mechanisms such as treatments and processes given in device fabrication. In research on optical and optoelectronic properties of an s-Si alloy thin film by using the modulated spectroscopy, a new evaluation technology dealing with amorphous semiconductors was developed. The technology separately evaluates carrier migration factors of electrons and holes by combining polarization angle dependence of electro-absorption signals with hole migration measurements. 4 figs.

  2. Research and development of photovoltaic power system. Study on growth mechanism of a-Si:H and preparation of the stable, high quality films; Taiyoko hatsuden system no kenkyu kaihatsu. Amorphous silicon no seimaku kiko to kohinshitsuka

    Energy Technology Data Exchange (ETDEWEB)

    Hirose, M. [Hiroshima University, Hiroshima (Japan). Faculty of Engineering

    1994-12-01

    This paper reports the result obtained during fiscal 1994 on research on a film forming mechanism for amorphous silicon for solar cells and its quality improvement. In in-situ observation on plasma CVD surface reaction by using the total reflection infrared absorbing spectroscopy, an observation on a real time basis was performed on the reaction process of an a-Si:H surface in contact with gas mixture plasma composed of SiH4 + CH4. In microscopic observation on initial processes of amorphous silicon growth, surface morphological change before and after a-Si:H deposition at 200{degree}C was observed by using an inter-atomic force microscope. The observation verified that a-Si:H has grown to an atomic layer. In research on defect density in a-Si:H fabricated under high-speed film forming conditions, analysis was made on correlation between the film forming speed at 250{degree}C and defect density in the film. Other research works include those on a high-quality a-SiGe:H film fabricated by using the nanometer film forming/hydrogen plasma annealing method, modulated doping into multi-layer films of a-Si:H/a-Ge:H, and thin film transistor using very thin multi layer films of a-Si:H/a-Ge:H. 5 refs., 12 figs.

  3. Research and development of system to utilize photovoltaic energy. Study on the scenario for the diffusion of photovoltaic power generating systems; Taiyoko hatsuden riyo sytem no kenkyu kaihatsu. Taiyoko hatsuden donyu fukyu scenario sakusei no tame no chosa

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the result obtained during fiscal 1994 on a survey to prepare scenario for the diffusion of photovoltaic power generating systems. Introduction target planned with help of a diffusion simulation was verified by calculations using simulation models. The calculations made the following points clear: facility costs and power generation costs for photovoltaic power generation systems, amount of introduced photovoltaic power generation systems, number of facilities introducing photovoltaic power generation systems, policy cost to achieve the target, annual power generation amount, oil substituting effect, carbon dioxide reducing effect, and market sizes. Power generation cost in fiscal 2000 would drop down to 53 yen per kWh in new installation in independent houses and down to 31 yen per kWh in systems used in schools. These reductions are the result of progress in mass production as a result of positively implementing the aiding policies. The required diffusion aiding policies revealed from the simulation results include expansion of subsidy operations for house construction, introduction of the systems into public facilities performed by public organizations, aid to system introduction into private business entities, subsidy to facility investments, and enforcement of power purchase institutions. 3 figs.

  4. Development of large scale and wind energy conservation system. Operational studies on a large-scale wind energy conservation system; Ogata furyoku hatsuden system no kaihatsu. Ogata furyoku hatsuden system no unten kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for operational studies on a large-scale wind energy conversion system. A total of 8 domestic and foreign cases are studied for wind energy conversion cost, to clarify the causes for higher cost of the Japanese system. The wind power systems studied include Japanese (5 units at Tappi Wind Park, the same type supplied by company M), US (California Wind Farm, 300 units) and UK (Wales Wind Farm, 103 units) systems. The investment costs are 639, 285 and 189 thousand yen/kW for the Japanese, US and UK systems, respectively. It is also revealed that the power plant itself and assembling costs account for a majority (70 to 88%) of the total investment cost. The higher cost of the Japanese system results from a smaller number of units installed, and the power plant cost can be drastically reduced by mass production. Increasing size also reduces cost greatly.

  5. Comparación de los efectos del D-004, imipramina y sertralina en el modelo de nado forzado en ratones Comparative effects of D-004, Imipramine and Sertraline in the forced swimming test in mice

    Directory of Open Access Journals (Sweden)

    Daisy Carbajal Quintana

    2012-09-01

    Full Text Available Introducción: La finasterida, inhibidor de la 5 a-reductasa, se emplea en el tratamiento de la hiperplasia prostática benigna, y ocasiona entre sus efectos adversos un aumento de cuadros de depresión. El D-004 es un extracto lipídico extraído a partir del fruto de la palma real (Roystonea regia, inhibe la 5 a-reductasa y previene la hiperplasia prostática benigna, y muestra un efecto antidepresivo moderado en el ensayo de nado forzado y suspensión por la cola. Objetivo: comparar el efecto del D-004 con la imipramina y la sertralina sobre la duración de las conductas de inmovilidad, nado y escalado en el ensayo de nado forzado. Métodos: se distribuyeron los ratones en ocho grupos: control (vehículo, tres tratados con D-004 (100, 250 y 500 mg/kg, dos con sertralina y dos con imipramina (30 y 50 mg/kg respectivamente. Estos se colocaron en un cilindro de cristal que contenía agua a una altura de 6 cm y se cuantificaron las conductas. Resultados: la administración oral de D-004 (100, 250 y 500 mg/kg durante 14 días redujo significativamente el tiempo de inmovilidad con respecto al grupo control (17, 22 y 25 % y aumentó significativamente la conducta de nado en 1,58, 1,68 y 1,74 veces. Este efecto resulta moderado (25 % comparado con las reducciones alcanzadas por la sertralina y la imipramina (³ 60 %. Las dosis mayores (250 y 500 mg/kg ocasionaron incrementos de la conducta de escalado, 2,79 y 3,55 veces superiores a la del grupo control, lo que mostró semejanza con la imipramina, aunque con una menor eficacia. Conclusiones: el D-004 ejerce un moderado efecto antidepresivo, lo que pudiera contribuir al manejo de los pacientes con hiperplasia prostática benigna en los cuales se informa coincidencia de cuadros depresivos.Introduction: Finasteride is a 5 a-reductase inhibitor to treat benign prostatic hyperplasia (BPH and one of the adverse effects is the increase of depressive symptoms. D-004 is a lipid extract from the real palm

  6. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium energy field / R and D mesoscopic organ control heat-resistant / wear-resistant metal group composite materials (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium energy bun`ya / mesoscopic fukuso soshiki seigyo tainetsu taimamosei kinzokuki fukugo zairyo no kenkyu kaihatsu (daiichi nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Out of the R and D of mesoscopic metal group composite materials, the paper described the fiscal 1997 results. In the in-situ method as a composite material making method, elucidated to some degree were chemical composition of Fe-C-Cr-V-Nb-Mo-W-Ni base multi-dimensional alloys, and wear resistance and oxidation resistance of MC type carbide dispersion multi-phase texture crystallizing as primary crystal and eutectic. In the composite material making with ceramic fiber and alloy by the pressure infiltration method, the paper clarified the texture formation mechanism in solidification/heat treatment by a combination of Al alloys and alumina long fiber, and the relation between fiber configuration and wear resistance. By MA and MG methods as the powder metallurgy composite material making method, a composed body of {alpha}-stainless steel of Fe-12%Cr composition and M23C6 of 40-90vol% are designed for alloy composition, and powder of amorphous or hyperfine texture was fabricated. By hot pressing this, fine texture mixed with M23C6 of 1{mu}m and ferrite was obtained. Further, by mechanically alloying the powder composed of high speed steel, TiN powder and TiC powder, hyperfine texture mixed powder was fabricated. Conditions of HIP treatment of large members were also discussed. 58 refs., 124 figs., 35 tabs.

  7. FY 2000 report on the results of the regional consortium R and D project - Regional consortium field. Third year report. R and D of the manufacturing technology of hybrid type biocompatible hard tissue substituting materials; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium bun'ya. Hybrid gata seitai yugo kinosei kososhiki daitai sozai seizo gijutsu no kenkyu kaihatsu (dai 3 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    As instrument materials substituting for hard tissue such as tooth root and artificial hip joint, the technology development is being proceeded with of the use of high-biocompatible {beta} Ti alloys coated by hydroxy apatite. Studies were made in the following 6 fields: 1) design of high-biocompatible {beta} Ti alloys, system control and dynamic evaluation; 2) development of high efficiency calcium phosphate ceramics (hydroxy apatite) and development of surface coating technology; 3) development of melting casting technology of high-biocompatible {beta} Ti alloys; 4) biological evaluation of biocompatibility of high-biocompatible {beta} Ti alloys and completion of dental precision casting technology; 5) basic research on affinity of low rigidity Ti alloys (trial manufacture); 6) development of technology of precision processing and precision finishing processing of alloys. In 5), in the test on affinity of the trial-manufactured alloys, stainless steel and existing Ti alloys, it was verified that the trial-manufactured alloys were excellent in affinity. (NEDO)

  8. FY 2000 report on the results of the regional consortium R and D project - Regional consortium energy field. Third year report. Development of precision farming system combined with the autonomous vehicle for large scale agriculture; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium energy bun'ya. Daikibo nogyo muke seimitsu jiritsu soko sagyo shien system no kenkyu kaihatsu (dai 3 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A farming supporting system that enables autonomous driving was developed from a viewpoint that the development of super manpower saving technology including automation helps sustainable development of the Japanese agriculture. The following were conducted: development of autonomous driving vehicle, development of automated operation unit, field space mapping for precision agriculture and development of groups of PF (precision farming) work machine (weeder, controller, fertilizer applicator, harvesting machine), development of groups of field work sensor (simple soil analytical system, crop growing sensor, glass yield sensor), development of field information managing database, development of work optimized application software. The operation test on the integration system was made at the model production field. The operation experiment using fertilizer applicator, controller and autonomous driving tractor was carried out at a beet field of 2ha in the farming zone in Tokachi, Hokkaido, and the results were obtained as expected. Further, as to the precision agriculture introduced with developmental equipment, etc., 20% of the energy consumption is expected to be reduced. (NEDO)

  9. FY 2001 report on the results of the immediately effective type new regional consortium R and D project. Development of the computer/human cooperation type guard robot for crime prevention/disaster prevention use using IT technology; 2001 nendo sokkogata chiiki shinsei konsosiamu kenkyu kaihatsu jigyo kenkyu. IT gijutsu wo mochiita keisanki ningen kyocho gata bohan bosai you keibi robotto no kaihatsu seika hokoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    In the light of the enlargement of demand/market of disaster prevention guard in association with changes in the social environment, development of a practical robot that automatically patrols and guards a building instead of a guard. The completed 'prototype guard robot' has a height of about 185cm and has a diameter of 65cm and moves by 4-wheel running at the maximum speed of 3km/h by the cooperative control for smoothly displacing/uniting the autonomous function and operational signals from remote operators. The robot recognizes the environment by various sensors (omniazimuth, laser, ultrasonic waves, light, infrared rays), patrols the inside of the building and lets the guard center (operator) know of it in case of emergency. The robot is also able to fight a fire by a fire extinguisher in the judgment of operator. As to the power supply, the robot can automatically change the consumed battery at battery exchange station and continue the automatical patrol and guard. Moreover, the autonomous function for going up/down in an elevator was developed by which the robot can move to different floors from the floor where he is using elevator. (NEDO)

  10. FY 1993 report of the results of the R and D of the important regional technology - Laser application advanced processing system technology. II. R and D of the composite functional member structure control technology (Development of the high grade surface processing technology of methane fueled aircraft use engine members); 1993 nendo juyo chiiki gijutsu kenkyu kaihtsu (fukugo kino buzai kozo seigyo gijutsu no kenkyu kaihatsu (methane nenryo kokukiyo engine buzai no kodo hyomen kako gijutsu kaihatsu). 2. Laser oyo senshin kako system gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    In the fields of aerospace, energy, etc., the development is expected of materials for engine members which are reliable and durable for a long time under the severe environment. Materials are developed which are erosion-resistant under the non-erosion environment of the front of engine of methane fueled aircraft. The basic experiment was commenced on the fabrication of micro-fine surface of Ti-6Al-4V alloys, etc. by superimposed laser beam irradiation. As a technology to fabricate the composite surface layer by supplying alloy components on the material surface, the development was started of a technology to form hard coating by irradiating laser to the Ti alloy surface put with metal elements and compounds on. Literature survey was made of the laser surface reforming technology of Ti alloys, etc. using JOIS. As to the fabrication of the composite surface layer, it was found out that the layer is easy to be brittle together with hardness. In the experiment on the micro-fine surface fabrication, it was found out that as a characteristic of light collector, the integration mirror is flat in strength distribution. Concerning the fabrication of the composite surface layer, it is a must to make it gradient because micro cracks are generated with the rising surface hardness. (NEDO)

  11. FY 2000 report on the results of the regional consortium R and D project - Regional consortium energy field. Final year report. R and D on the bio-fuel production by high functional bio-reactor; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium energy bun'ya. Kokino bio reactor ni yoru bio nenryo seisan ni kansuru kenkyu kaihatsu (saishu nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A system was developed for producing automobile fuel from the recycled paper and waste cooking oil using high functional intelligent yeast. Element technology is the functional yeast creation technology and the online intelligent control technology of the process into which the fixed bio-reactor was inserted. Studies were made on the following: 1) creation of high activity lipase production/ethanol production yeasts; 2) bio-fuel production by intelligent bio-reactor; 3) process optimization control technology by fuzzy control; 4) stabilization of bio-fuel production yeast; 5) comprehensive investigational study. In FY 2000, the results were obtained as written below: development of the stable lipase coming from rhizopus japonicus, fixed bacterium using rhizopus oryzae fungus body which can be used more than ten times, direct ethanol fermentation from starch by developing the multi-copy glucoamylase manifestation yeast, operation of a 20L capacity bench plant, etc. (NEDO)

  12. Fiscal 2000 achievement report on the venture business assisting type regional consortium - Minor business creation base type. Development of touch panel display operated by micro-Peltier device; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo seika hokokusho. Micro Peltier soshi ni yoru shokkaku display no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The project aims to develop a small, light, and inexpensive touch panel display that enables visually handicapped people to transmit information by use of their manual sensation. Information from computers or the like is exhibited on the display in arrays of hillocks and dents. For improvement on display resolution and for cost reduction, efforts are made (1) to employ micro-Peltier devices for the simplification of the hillock-dent display mechanism and for the realization of a high resolution tactile display and (2) to establish a technology for manufacturing low-cost micro-Peltier devices. In the tactile display to be developed, the hillocks and dents are formed using gas-filled tiny balloons. The balloons are 2-dimensionally arranged, with the gas therein to be expanded and contracted via micro-Peltier devices. Difference between hillock-dent arrays and changes therein with the passage of time provide information. The gas in the balloons is inflated and contracted through the operation of micro-Peltier devices. In concrete terms, efforts were made to develop (1) a prototype hillock-dent display, (2) a technology for manufacturing high-performance low-cost micro-Peltier devices, and (3) a software program for computers to drive tactile displays. (NEDO)

  13. Fiscal 2000 report on result of R and D on robot system cooperating and coexisting with human beings. Development for putting new power generating technology to practical use; 2000 nendo ningen kyocho kyozongata robot system kenkyu kaihatsu seika hokokusho. Shinhatsuden gijutsu jitsuyoka kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    A highly safe and reliable robot is being developed capable of cooperating and coexisting with human beings to carry out complicated operations in a dangerous site such as a plant, power station maintenance, construction, disaster relief, etc. This paper describes the fiscal 2000 results. In the research for navigated walking functions, the capabilities were extracted for walking straight, turning around and going up and down stairs, with a virtual platform simulated and examined. In the development of remote operation for proxy drive, a method was investigated for instructing change in posture and cooperative movement of the arms and legs. In the evaluation of proxy drive operations for industrial vehicles, a type of operating machine was specified for driving in a standing posture applicable to a robot. In the development of information forming technology supporting remote operations, a basic design was made for the simulator technology of compensating information. Server/client remote control technology was investigated, while a plurality of bi-directional interface means were reviewed for the purpose of efficient information exchange between a robot and an operator. A system for assembling a wall panel was evaluated as an outdoor man-machine cooperative operation. Adaptability to complicated environment such as unprepared ground was also studied, as well as the control of movement of a humanoid robot. (NEDO)

  14. Fiscal 1998 R and D report on the human coordination/coexistence robot system (development of practical technology for rational energy use); 1998 nendo ningen kyocho kyozongata robot system no kenkyu kaihatsu (energy shiyo gorika kankei gijutsu jitsuyoka kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report reports the R and D on the human coordination/coexistence robot system possible to perform various works instead of people. As for an intelligent robot hand, 4-finger hand and arm hardware were developed and fabricated, and operation of the assembled system of them was tested. As for a robot platform, a remote control platform, and the interface specifications of command communication and data communication were studied. As for 3-D walk adaptive to land shapes, an analysis environment for a control algorithm and an easy-to-use environment for a virtual platform simulator were prepared. By using this analysis environment, the central part of the walk control algorithm, and a module for forming walk patterns were developed. In the application research on energy saving, various problems on dangerous and harsh conditions in construction and disaster restoration works were analyzed, and the needs of a humanoid robot for such works were studied. (NEDO)

  15. Fiscal 2000 achievement report on the venture business assisting type regional consortium - Minor business creation base type. Development of 1-chip multifunctional motion sensor and its application to intelligent module; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo seika hokokusho. 1 chip gata takino undo sensor no kaihatsu to intelligent module eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The aim is to embody an intelligent micromodule for sensing bodily motions. For this purpose, technologies were established for high accuracy/high aspect ratio etching of crystals and for detecting angular velocity and acceleration, and a 1-chip multifunctional motion sensor was developed. The results of the efforts are briefly described below. A 1-chip multifunctional motion sensor (device size: 16 times 6 times 0.3mm) was developed, capable of simultaneously detecting uniaxial acceleration and uniaxial angular velocity, and an operating circuit was established for the detection. Using the 1-chip multifunctional motion sensor, a wrist watch type intelligent module was developed, capable of discriminating between various patterns of human behavior (walking, jogging, desk work, etc.). An intelligent module and the host computer were connected by wire or radio enabling the real-time observation of a patient's kinetic behavior, and this helped develop an application program allowing the quantification of the rate of recovery of patients undergoing rehabilitation. Using an intelligent module, an application program was developed enabling a laryngeal patient to establish communication by a physical action in case of emergency. (NEDO)

  16. Fiscal 1997 report on the results of the international standardization R and D. Development of a test method of halogen-free flame-retardant cables and a study of the cable standards; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Non halogen nannen cable no shiken hoho kaihatsu narabini cable kikaku no kento

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As for halogen-free flame-retardant cables with high recyclability and safety (HFFR cables), the development is being promoted in many countries as a next generation cable. The standard of HFFR cables has been set up by some countries and groups in the U.S. and Europe, but the international standard has not yet been established independently. The purpose of this R and D is the development of a test method to appropriately evaluate the performance of HFFR cables and its standardization, and the proposal of the international standardization on common items of the cable standard. A study group was sent to the U.S. and Europe to investigate the development, application status and test methods of the HFFR cable overseas. The ion chromatography and FT-IR method were studied as methods to evaluate corrosivity/toxicity of the gases emitted in combustion. The performance of HFFR cables in Japan and abroad was also evaluated mainly by IEC standards. Further, considering the results of the overseas surveys, the structure and details of the international standard plan on HFFR cables were studied, and approaches to the international standardization were studied. 32 refs., 31 figs., 54 tabs.

  17. Achievement report for fiscal 1998. Research and development of ultimate atom/molecule manipulating technologies (Development of technology for formation of advanced function materials for use under power generation environment); 1998 nendo genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho. Hatsuden kankyoyo kokino sozai keisei gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim is to establish atom/molecule observing and manipulating technologies commonly applicable as basic technologies to industrial fields of new materials, electronics, biotechnology, chemistry, etc. The technologies to be established involve atom level observation and manipulation by mechanically probing into organic molecules such as those of solid surface DNA, microstructure formation with atoms arbitrarily arranged by use of a microfine electron beam and surface chemical properties, simulation by the first principle calculation for the theoretical prediction atom/mole surface application in a process, and new materials to replace semiconductors. The subjects of research and development selected for this fiscal year are the study of silicon nanostructure formation and physical properties, study of nanostructure formation technology based on cluster manipulation, study of nanostructure formation processes using chemical reaction control and local structure analysis, study of new properties of correlation-intensive electron based new materials, study of spin measuring technology, and the study of theoretical analysis of atom/molecule dynamic processes. (NEDO)

  18. Report on achievements in fiscal 1999 on the project for research and development of an intellectual base creating and utilizing technology. Development of a base sequencer for ultra-difficult-to-read DNA; 1999 nendo chiteki kiban sosei riyo gijutsu kenkyu kaihatsu seika hokokusho. Chonandoku DNA enki hairetsu sequencer no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the achievements in fiscal 1999 on developing a device to read ultra-difficult-to-read DNA basic sequence. When DNA synthesizes complementary chains by using DNA polymerase , the DNA incorporates deoxyribonucleatide triphosphates (dNTP, available in four kinds), stretches the complementary chains, and discharges pyrophosphoric acid at the same time. Light is emitted when this is converted into adenosine triphosphate (ATP) by using sulfurylase, and reacted with luciferase. Progress of the complementary chain synthesis can be known by monitoring this reaction. Which nucleic acid having been put into has caused the complementary chain synthesis can be known by sending the four kinds of dNTPs independently into the reacting section in the respective sequences, and the basic sequence of the subject DNA can be decided. It was so devised that the excess dNTP in the pre-reaction is decomposed by enzyme not to remain because the reaction is performed being divided step-wise. The problems in the development include: achievement of sequential complementary chain synthesis at high rate and with high reaction yield, decision of reacting conditions suitable for automation and micronization, and development of a module that can supply dNTP being the reaction material into the reacting section sequentially. A prospect was attained on developing the elementary technology. (NEDO)

  19. Achievement report for fiscal 1998. Research and development of technologies for creating new bioaffinity molecules using submicron beads (Energy use rationalization related technology practicalization); 1998 nendo biryushi riyogata seitai ketsugo busshitsunado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Energy shiyo gorika kankei gijutsu jitsuyoka kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In the effort to develop chemical substance/bioreceptor analysis technology using submicron beads, polystyrene core/polyglycidyl methacrilate beads are used in a study started about a detachable spacer using newly developed fixation technology. In the development of bioaffinity chemical substance refining technology, two kinds of sugars and several kinds of aromatic aldehydes serve as building blocks in the construction of a library, and studies are made of analyses using liquid chromatography and mass spectrography. In the development of novel substance creation technology based on information on the analysis of chemical substance/bioreceptor, in an effort at developing technologies for creating novel function provided chemical substances, heterocyclic compounds, alkaloids, and sugar compounds are selected and their syntheses in the liquid phase and solid phase are studied, which is again for the construction of a library. (NEDO)

  20. Report on the achievements in fiscal 1999. Research and development on a basic technology to apply superconductivity (Development on an ultra high speed signal processing technology with low electric power consumption); 1999 nendo chodendo oyo kiban gijutsu kenkyu kaihatsu seika hokokusho. Teishohi denryoku chokosoku shingo shori gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    The development of a technology to design superconductive circuits has worked on (1) a circuit design technology and (2) fabrication of a small scale demonstration circuit. In Item (1), analog evaluation provided SN characteristics of 11 bits or more by using a primary Sigma-Delta ({sigma}-{delta}) modulator as the element circuit for an AD converter. In addition, a proposal was made on a decimation filter using a secondary {sigma}-{delta} module and a counter, which use a magnetic quantum multiplication element as feedback. In Item (2), fabricating conditions for an NBCO film were established with high Tc reproducibility. In addition to having established a design method for a superconductive filter, a technology was developed to deposit superconductive oxide conductors on both sides of an MgO substrate having a thickness of 0.5 mm. This development provided a prospect of realizing a filter for large electric power of 10 GHz and 10W class. In developing a technology for measuring superconductive circuit characteristics, discussions were given on a measurement and evaluation technology. To explain, with regard to the technology to demonstrate high speed actions, a high-speed action demonstration and measurement system was started up, which can be cooled down to 5K, and has small critical current variation due to magnetic flux trap. Output of SFQ signals up to 4 GHz was successfully detected. (NEDO)

  1. Fiscal 1996 report on the results of the R and D of technology of high-level treatment/effective use of domestic/industrial wastes, etc. (for public); 1996 nendo Shin Energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku seikatsu sangyo haikibutsu shori yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of reducing environmental loads of waste and effectively using resource by waste recycling, a study was conducted of high-level treatment/effective use technology for domestic/industrial wastes, etc. The paper reported the results of fiscal 1996. In the EcoCement producing technology using the synthetic urban type waste, EcoCement with stable quality was obtained using sewage sludge and industrial waste as raw materials. In the specified freon decomposition disposal technology, an experiment was carried out on durability, etc. of the processing unit. In the high speed/reduced smell biological garbage disposal technology, technology of fermenting disposal, etc. were established, and at the same time technology of making garbage compost was developed. In the technology to manufacture environment friendly type plastic containers, etc., a degradation behavior was grasped of degradable plastics in the compost. In the spread type waste plastic/thermal recycle technology, studied were a system to collect waste and a system to make waste solid fuel. Technology to recycle coolant freon was studied. 14 refs., 261 figs., 137 tabs.

  2. FY 2000 report on the results of the regional consortium R and D project - Regional consortium field. Second year report. Development of the technology to combine plastic and metal using biodegradable natural polymer; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium bun'ya. Seibunkaisei tennen plastic to kinzoku no fukugoka gijutsu no kaihatsu (dai 2 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The development was proceeded with of the electromagnetic wave shielding technology composed of plastic body, chitosan containing biodegradable coating and electroless metal plating layer. Key technologies are for formation of biodegradable electroless plating use coating using chitosan as chemical adsorption carrier of Pd and for separation of the body and the metal thin film by the environment-harmony method for recovery of the material. Studies were made in the following 5 fields: 1) method to produce low molecular chitin and chitosan; 2) application of biodegradable materials to electromagnetic wave shielding; 3) evaluation of physical properties and function of a new electromagnetic wave shielding system; 4) R and D of the degradation method of the new electromagnetic wave shielding system; 5) comprehensive investigational study. In FY 2000, in 1), conditions for production of chitosan degrading enzymes were determined, and also the scale of bio-reactor was increased up to 20L. Further, chitosan was so re-synthesized that it disperses to the electroless plating use primer. (NEDO)

  3. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium energy field / Development of the plasma use surface treatment process by in-situ control (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium energy bun`ya / in-situ seigyo ni yoru plasma riyo hyohi shori process no kaihatsu (daiichi nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the fiscal 1997 result of the development. To know of in-plasma phenomena such as carburization and nitriding, a basic plasma experimental device was fabricated for quantitative measurement of reaction activity species. For the study of reaction control between plasma and substrate, a rotary analyzer type ellipsometer was fabricated as a method to detect composition and thickness of the deposit on the substrate surface. For He gas cooling after carburization and hardening, basic specifications for He gas refining/circulating system were confirmed. For perfect non-hazardous processing of exhaust gas from plasma carburization furnace, conducted was the thermodynamic computation of the process. Priority in order of the functions to be possessed as specifications for basic design of mini plant is plasma carburization, He gas cooling, and in-situ measurement. To make the most of the plasma use surface treatment as substitutes for expensive alloy elements, sliding parts/die-cast mold raw materials were carburized to measure the hardness. The Cr carbide coating technology by plasma CVD is also under study as an application example except carburization. 47 refs., 59 figs., 31 tabs.

  4. `Technology for Advanced Treatment of High Melting Point Metal-Based Material,` local research and development of important technology for fiscal 1997. Development of materials creation technology for high efficiency power generator components; 1997 nendo juyo chiiki gijutsu kenkyu kaihatsu. `Koyuten kinzokukei buzai no kodo kako gijutsu` (kokoritsu hatsuden`yo buzai sosei gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Efforts are made for the creation of high melting point metal-base materials to replace the currently-used Ni-base superalloys for the turbine to withstand higher operating temperatures. The main efforts made in fiscal 1997 are outlined. As in fiscal 1996, Nb-base solution alloys, in which solution reinforcement elements such as Mo and W are alloyed, are manufactured by button arc melting and tested for mechanical properties and texture/characteristics. In the designing and evaluation for a strongest Nb-base composite material, Nb-base composite materials are manufactured by use of particle dispersion-strengthening attained by addition of intermetallic compounds or elements to contribute to the formation of oxides, carbides, or nitrides. Nb-base composite materials may also be manufactured by use of eutectic-strengthening attained by utilizing crystallization in the process of coagulation. The resultant Nb-base composite materials are evaluated for their dynamic characteristics at high temperatures. In the development and evaluation of technologies for creating Nb-base materials for high-temperature components, larger specimens as heavy as several kg are tested in line with small specimens for basic studies, and the results are utilized for alloy designing for high-temperature materials. 50 refs., 97 figs., 15 tabs.

  5. Report on achievements in fiscal 1999 on the project for research and development of an intellectual base creating and utilizing technology. Development of a screening test method with high accuracy for internal secretion disturbing substances; 1999 nendo chiteki kiban sosei riyo gijutsu kenkyu kaihatsu. Naibunpi kakuran busshitsu no koseido screening shiken hoho no kaihatsu oyobi data kiban seibi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the achievements in fiscal 1999 on developing a screening test method with high accuracy for internal secretion disturbing substances. Development was made in cooperation with the OECD on the screening method that uses as a parameter whether a chemical substance has a hormone-like activity. For the womb breeding assay method to evaluate a feminine hormone-like activity, a reproducibility and comparison test was performed on womb breeding in immature rats administered with ethinylestradiol, the administration routes, and animals used (young and weak rats, and rats whose ovaries have been extracted). In order to evaluate a masculine hormone-like activity, the basic data were collected to develop the Hershberger method, and participation was made in the OECD verification tests. Discussions were given on comparison on castrated and non-castrated rats when 17 {alpha}-methyltestosterone was administered, the administration period of time and reproducibility when immature rats were used. The Hershberger method reactivity was discussed on rats relative to estrogen. In a toxicity test using 28-day repetitive administration, bisphenol A gave impacts on the kidney, the stomach and intestine tubes. (NEDO)

  6. Fiscal 2000 achievement report on the venture business assisting type regional consortium - Minor business creation base type. Development of high pressure fluid aided dyeing and finishing system for cellulose textile products generating no waste liquid; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo seika hokokusho. Cellulose kei sen'i seihin no koatsu ryutai ni yoru muhaieki senshoku kako system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    There is a voice in the textile dyeing industry for a dyeing and finishing method without discharge of waste liquid from the viewpoint of environmental protection. When the special coexistence effect is applied to the technology of making polar dyes soluble in high pressure carbon dioxide, according to Associate Professor Mishima of Fukuoka University, a dyeing method is feasible wherein the separation of supercritical carbon dioxide and the dye is easier than in the conventional method of dyeing in water and wherein discharge of waste liquid after dyeing is not necessary. He also writes that technologies for recovering carbon dioxide have already been established. Under this project, attention is paid to cellulose textile products which will find a great demand, and efforts are made to commercialize a novel dyeing and finishing system of the low environmental impact type. The results of the research conducted under the project involve (1) the improvement of various dyes and assistants in their degree of solution in high pressure carbon dioxide, (2) development of a technology of attaching dyes and finishing agents to textiles, (3) designing and construction of a practical high pressure fluid dyeing and finishing apparatus, (4) search for optimum dyeing conditions for textile products using the said apparatus, and (5) the reinforced functions that textile products have after being dyed. (NEDO)

  7. Fiscal 1998 research report on application technology of molecular assemblies for a functional protein system (Development of advanced maintenance technology for power plants); 1998 nendo kinosei tanpakushitsu shugotai oyo gijutsu no kenkyu kaihatsu. Hatsuden shisetsuyo kokino mentenansu gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Basic research was made on engineering reappearance and industrial use of the complex function of molecular assemblies for a functional protein system of organisms. In research on a light controllable reaction system by physicochemical technique, construction of a light controllable bioreactor is in promotion. In research on a light controllable reaction system by biochemical technique, researches are in promotion on structure and correlation analysis of photosynthetic protein complex, stabilization of an activity, and conversion of light energy to membrane transport energy using cyanobacteria as material. In research on a molecular recognition controllable reaction system in a fine membrane region, correlation analysis of the structure and function of glutamine receptor channels is in promotion. In addition, researches were made on reconstitution of endocytic micromachinery, a multi-enzyme system for synthesis of glycosphingolipids, a complex redox system by genetic engineering technique, and application technology of molecular assemblies for a functional protein system. (NEDO)

  8. Fiscal 1997 research report on the R and D project under a consignment from NEDO. Photonics engineering (R and D of photonics measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Photon keisoku kako gijutsu (photon keisoku kako gijutsu no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Survey was made on the trend of R and D on photonics engineering to clarify the direction of its impact and ripple effect on industrial fields. Reduction of environment burden, improvement of the productivity and reliability of products, and creation of new industries by novel creative R and D are necessary simultaneously. For reconsideration of the previous measurement and machining technologies in a manufacturing industry, use of photon (laser) beams is promising. As photonics engineering, photonics measurement and machining, and elemental and peripheral technologies for generation and control of photon were surveyed. Photonics application technologies for medical care and diagnosis, communication and transmission, entertainment, and chemical fields were also surveyed. In fiscal 1997 as the first year of this project, based on the results obtained in leading researches conducted until fiscal 1996, some technological issues were clarified through the survey on the latest trend of photonics engineering in measurement, machining and generation fields, and its feasibility in the other fields. 265 refs., 91 figs., 10 tabs.

  9. Report on the results of the fiscal 1997 R and D under consignment from NEDO of photon measuring/processing technology (R and D of petroleum production system high-grade measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (sekiyu seisan system kodo keisoku kako gijutsu kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The R and D were conducted of high-strength and high-accuracy welding/joining technology using laser, technology to measure and assess the joining state of structures and defects around the surface of structures and inside structures by high accuracy and high resolution, and technology/equipment to generate a laser light source for the tool, which are all required to remarkably enhance safety/reliability of oil drilling facilities working in the severe environment. In fiscal 1997, as the R and D of oil production system high-grade measuring/processing technology, technical study, study of measures to be taken, operating experiment, assessment, examination, etc. were conducted on the following themes: 1) macroscopic processing technology (R and D of high-reliability laser welding technology), 2) non-destructive composition measuring technology (R and D of internal measurement and photoelectron spectroscopy using short-wavelength radiation), 3) tight-focusing all-solid-state laser technology (R and D of fiber laser), 4) tight-focusing all-solid-state laser technology (R and D of high-efficiency laser diode), and 5) comprehensive investigation of phonics engineering (investigation for photon-applied materials processing technology). 256 refs., 205 figs., 18 tabs.

  10. FY 1991 report on the results of the contract R and D of the human sense measuring application technology. 4. R and D of correlation/evaluation technology (2); 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 4. Sokan hyoka gijutsu no kekyu kaihatsu (2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    As a part of the correlation/evaluation technology, the following were conducted in this R and D. (1) R and D of space-type human interface adaptable to human sense; (2) R and D of human comfortmeter; (3) research on non-contact skin temperature measuring technology; (4) research on measuring technology of stress indicator material, and technology to relax stress using fragrance. In (1), conducted were the development of space-type human interface, study on the correlation between the visual operating environment and the mental work load/working efficiency, and development of acceleration heartbeat meter. In (2), the basic element experiment was conducted to clarify the basic concept of human comfortmeter, and the basic specifications were made clear. In (3), the experiment using person to be tested was studied to know face skin surface temperature distribution patterns, and correlations between quantity of senses such as thermal/cold senses, concentration, strain and relaxation and mental quantity. In (4), the most important subject is preparation of the environment suitable for the development of new experimental process and device/software. Therefore, the preparation was made considering listing-up of the expected experimental items, selection of common elements, systematization of hardware, establishment of rules of the experimental process, etc. (NEDO)

  11. FY1998 report on the achievements on the research and development of a quickly effective and innovative energy environment technology, and development of a technology to re-use wastes as resources and fuel; Sokkoteki kakushinteki energy kankyo gijutsu kenkyu kaihatsu, kanen gomi saishigen nenryoka gijutsu kaihatsu 1998 nendo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With objectives to realize a recycling society and protect global environment, development will be made on solidified fuel using waste papers and waste plastics as the raw materials. This paper describes the achievements in fiscal 1998. To develop a pretreatment technology, analyses and discussions were given on functions required to separate and remove such foreign materials contained in combustible wastes as metals, ceramics, and glasses, and to pulverize the combustibles removed of non-combustible materials. A bench-scale testing equipment of 0.5 ton per hour was installed and operated on a trial basis. In order to identify dechlorination properties of waste papers and plastics to develop a dechlorination technology, basic dechlorination and pyrolysis tests were performed by using cellulose powder and polyvinyl chloride powder as raw materials. Detailed design, fabrication, installation and trial operation were carried out on a dechlorination device to be assembled into the bench-scale testing equipment. Investigations were given on the actual status of discharge and collection of waste papers and plastics to discuss the practical use of the fuel. The current status of discharge of general wastes was identified, which will be the object of the container package recycling law. The range of LCA was discussed, and technical data of wastes electric power generation were collected. (NEDO)

  12. FY 1999 achievement report on the project on the R and D of industrial science technology. R and D of the atom/molecule limit operation technology (Development of high-functional material formation technology for electric power generation environment); 1999 nendo genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho. Hatsuden kankyoyo kokino sozai keisei gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The paper described the FY 1999 results of the study of atomic technology. Using a combined system of the scanning tunnel microscope (STM) with the field ion microscope and the atom probe (AP), a few Ag atoms were identified. Si windows were formed by electron beam irradiated from a STM tip, and Ge nanocrystal array was formed at the windows by supplying GeH4 gas. Iron clusters were deposited on Si substrates. With those as nuclei and in self-formation for etching masks, Si pillar distribution nano-crystals were etching-processed. The oxidation process of clean Si surface using ultra-high vacuum electron spin resonance was observed, and the incomplete state of the Si oxidation process was observed. Perovskite oxide superlattices composed of the two kinds were fabricated using the laser ablation method. The layer type antiferromagnetic spin arrangement is artificially modulated in the superlattices along the stacking direction. To observe the magnetic nano-structure, the development was commenced of a spin-polarized STM. The paper theoretically analyzed the dynamic process of atoms and molecules. (NEDO)

  13. Project in fiscal 2000 of research and development of industrial and scientific technologies. Achievement report on 'research and development of ultimate atom and molecule operation technology' (development of technology to form high-function materials for electric power generating environment); 2000 nendo genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho. Hatsuden kankyoyo kokino sozai keisei gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Research and development has been performed with an intention of establishing an observation technology and an operation technology of atoms and molecules, as a common infrastructural technology in different industrial fields. This paper reports the achievements in fiscal 2000. In the research of an inorganic atom and molecule identification and operation technology, a composite device constructed of an STM and an electric field ion microscope/atom probe was used to draw out and identify two or three Ag atoms from Si:Ag surface and show clearly the correspondence with the original atomic positions. In the research of a technology to form and control nano-structures on surface and interface, Ge/Si hetero nano crystals with a size of 20 nm were formed on Si nano crystals formed on an opening in the atom layer oxide film on an Si substrate. Furthermore, hetero nano crystals of Si/Ge/Si, in which Ge nano crystals are embedded in Si nano crystals, were formed successfully. In the research of a spin electronics technology, research was performed, with regard to perovskite vanadium oxides, on decay of the orbital order due to changing the band filling, and insulating metal transition. (NEDO)

  14. Fiscal 2000 report on results of project for R and D of industrial science and technology in cooperation with universities, and R and D of platform for designing high functional materials (development of energy use rationalization technology); 2000 nendo kokino zairyo sekkei platform no kenkyu kaihatsu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    R and D was conducted concerning sophistication and high speeding in designing materials by simulation technology utilizing a new calculation method, with fiscal 2000 results compiled. A group working on coarse-grained molecular dynamics have tackled three problems such as the development and application of a multi-purpose coarse-grained molecular dynamics engine called COGNAC. A group on dynamic average domain method added various functions to a new multi-purpose dynamic average domain simulator called SUSI, and also achieved a variety of results by simulations using this simulator. A group on dispersed structure simulation has been proceeding with the development and application study of a multi-phase dynamics simulator called MUFFIN. A verification research group carried out verification of predictability, with the accuracy intended by each program, on thermal properties, optical properties, formability, etc., using polyethylene as the verification material. A platform group prepared a new high-speed platform that used less memory. (NEDO)

  15. Fiscal 1998 research report. R and D on the nanometer-controlled optical disk system / Magnetic domain- response 3-D optical memory technology (Development of rational use technology of energy); 1998 nendo nanometa seigyo hikari disk system no kenkyu kaihatsu seika hokokusho (jiku oto sanjigen hikari memory gijutsu). Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report describes the fiscal 1998 result on the magnetic domain-response 3-D optical memory of the nanometer-controlled optical disk system. The magnetic domain response technology is a next-generation optical disk technology which copies fine bits recorded on a recording layer on a read-out layer while magnifying them, and detects the bit smaller than a read out optical spot as large signal level. Magnetic domain-response read out of a fine magnetic domain of 0.12{mu}m in mark length and 0.60{mu}m in track width recorded by optical pulse magnetic field modulation was attempted under the conditions of conventional wavelength (around 680nm) and NA (0.55), and succeeded in expanding unobservable signals up to saturated amplitudes. This is equivalent to a 2-D recording density of 10Gbit/in{sup 2}. Crosstalk-free read out was also verified. As for R and D on the magnetic circular polarization enhanced multiple read out system, the 2-wavelength read out system was fabricated by using 515nm Ar laser light and 780nm semiconductor laser light. It was verified in 2- wavelength read out test that the multi-wavelength read out system is reasonable theoretically. (NEDO)

  16. Report on the research and development under a consignment from NEDO of high temperature carbon dioxide fixation and utilization technology for fiscal 1996; 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku gyomu seika hokokusho. Nisanka tanso koon bunri kaishu sairiyo gijutsu kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the prevention of global warming, this R and D is aimed at separating/recovering high temperature CO2 from high temperature gas at 300degC or above and developing technology for effective use of the recovered CO2 as measures taken for reduction in CO2 emissions from the fixed emission sources. In this fiscal year, the following were proceeded with: heightening of separation performance evaluation technology, promotion of technical development of ceramic separation membranes and supports, and development of element technology of modular integration. In the examinational research on separation technology and system optimization, the following were conducted: survey of trends of the technical development, conceptual design of plant and prediction of process behavior, assessment of applicability of the process, and study of effects of utilization/spread of the developmental technology. In the former R and D, borosilicate glass powder rich in alkali is formed on the ring by joining the trially manufactured hollow fiber type membrane and the same form alumina cylinder, and sealing property and strength which stand measurement of permeability were confirmed. In the latter, an innovative process applied with CO2 high temperature separation technology was studied to examine effects of the spread of high temperature gas separation technology. 403 refs., 478 figs., 134 tabs.

  17. Research and development achievement report for fiscal 1998 on accelerated type biological function construction technologies. Development of new-type advanced-function enzyme creating technologies; 1998 nendo kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu seika hokokusho. Shingata kokino koso sosei gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    An artificial mutation/selection system was constructed in a laboratory based on molecular-level findings collected about the biological evolution mechanism, and biotechnology was studied for creating excellent biological functions. In the study of novel mutation generating technologies, selection is performed after the formation of numerous chimera enzymes by a family shuffling process using resistance to heat as the index. Then, a hybrid enzyme with its resistance to heat more than 10 times higher than that of the parent enzyme was obtained. In the study of establishing coordination between genotype and phenotype, a highly sensitive bacterial coordination technology was developed, and a highly sensitive detection method was constructed using a flow cytometer. As for technologies of highly efficient selection, a research was conducted about the selection of catalytic antibodies equipped with protease and esterase activity. In the study of technologies for enhancing adaptive walk in an evolution experimenting system, the usefulness is studied of a terrain survey based on the adaptive walk theory and a high-efficiency adaptive walk method using the mutation scrambling method. (NEDO)

  18. Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (low-cost Si sheets by continuous casting method); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (renzoku cast ho ni yoru tei cost Si kiban seizo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on manufacturing of low-cost Si substrates by continuous casting method in fiscal 1994. (1) On manufacturing of ingots of 16 piece size, the ingot of nearly 170kg was manufactured by batch process using the Si melt injection unit prepared in last year. (2) On oxygen and carbon contents in wafers, the contents were measured by FT-IR after slicing of the ingot. As a result, the oxygen and carbon contents could be successfully reduced to the targets of 10ppma and 5ppma or less, respectively. (3) The resistivity distribution of the ingot ranged over the target of 1-2ohm-cm. (4) Cells of 100 {times} 100mm{sup 2} wide and 350{mu}m thick were verified by in-house evaluation process. Although lower cell conversion efficiency was found at the center top of the ingot, a vertical efficiency stability was nearly sufficient as a whole. (5) On the crystal growth unit prepared in fiscal 1994, any problems were not found on automatic driving and vibration during moving. 8 figs.

  19. Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (technical development for production of high purity silicon); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (taiyo denchiyo silicon seizo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on development of manufacturing technologies of Si for solar cells in fiscal 1994. (1) P in Si could be successfully reduced to 0.1ppmw by EB melting method. The condition possible to reduce P in Si while continuously supplying metal Si was found. The 20kg class EB melting equipment was also designed and manufactured which can be connected with solidifying rough refining process. (2) Use of a water-cooling copper mold was studied using a small melting equipment for cost reduction in solidifying rough refining process. As a result, the prospect of crucible-free technology for removal of P and solidifying rough refining was obtained. (3) B in Si could be successfully reduced to the target of 0.1ppmw by vapor addition method using a plasma melting equipment. (4) The prototype SOG-Si achieved a conversion efficiency of 14.1% as solar cell. In addition, the advanced solar cell prepared by efficiency enhancement process achieved a conversion efficiency of 15.9%. 3 figs.

  20. Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (low-cost Si substrates); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (usugata takessho kigan seizo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on manufacturing technologies for low-cost high-quality Si substrates in fiscal 1994. (1) On the 220mm square type electromagnetic casting technology, development of fast stable casting technology was studied using the previously installed 220mm square type electromagnetic casting furnace. As a result, continuous stable casting was achieved at high casting speed up to 3.0mm/min. Any degradation of crystalline quality due to high speed casting was not found. (2) On the 350mm square type electromagnetic casting furnace, oscillation circuit constants were analyzed for design of the power source for No.4 electromagnetic casting furnace. In graphite heating experiment using the 350mm square type water-cooling copper crucible heated by 1000kW high-frequency power source, sufficient heat quantity was obtained for initial melting of Si. Any problems in Si melting were not found through Al block melting test. 6 figs.

  1. Fiscal 1997 report on the results of the international standardization R and D. Study on optimizing design/evaluation technology using quality engineering; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Hinshitsu kogaku ni yoru saitekika sekkei hyoka gijutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To take up methodology of quality engineering as ISO standards, the basic document was worked out which regulates general items for the method to evaluate the operation of various systems as function for proposal to ISO. A method is developed for evaluating the design quality by function and predicting/optimizing the quality of finished products. For the evaluation of slippage from ideal function, the SN ratio and Maharanobis`s distance are used. In the two basic working groups (WG), a document on general methods to evaluate function was made. To reinforce the basic document, WGs divided into five by content/business were set up. Each WG collected examples from the past, studied methods to evaluate function in each field, and recorded them in the document. Five experiments for each WG were conducted to verify effectiveness of the above-mentioned method to evaluate function recorded in the document. As a result, the draft to present to ISO was worked out since the experimental WGs proved the effectiveness of the method to evaluate function in each field. 85 refs., 147 figs., 185 tabs.

  2. Achievement report on the incoming projects related to ITS. Research and survey involving 'Research and development of universal design vehicle based on ITS technology'; ITS renkei kokei project an. 'ITS gijutsu wo tenkaishita universal design vehicle no kenkyu kaihatsu' ni kakawaru kenkyu chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    For the promotion of 'Report on Strategy of Automobile Industrial Technologies - Strategy 2 - Promotion of Development of Vehicle Environment Recognition Technology and Driver's State Detection Technology,' investigations and studies including overseas surveys are conducted over six selected subjects which are (1) ITS (Intelligent Transportation System) and VCSS (Voice Communications Switching System), (2) old people, handicapped people, and universal design, (3) intelligent interface, (4) techniques of assessing bionic data and load of driving, (5) driving simulator and virtual reality, and (6) data communication, mobile data communication in particular. It is then found that, on the assumption that there exists a mobile communications environment such as ITS or Internet aboard the automobile, it is important to develop a universal design automobile which adapts itself to the driver thereby respecting driver's viewpoint and that such is to be accomplished by grasping driver's characteristics especially under extraordinary conditions in the way of Kansei engineering and by redesigning the driver's operating system making use of the active interface technology. A conclusion is reached that development should continue in compliance with the separately specified 6 items which are indispensable for the research and development of an ITS based man-adaptive automobile. (NEDO)

  3. Report of FY 1997 on the international cooperation project. Survey of globalization of the effective energy resource utilization technology (development of high-accuracy acceleration measurement system); 1997 nendo kokusai kenkyu kyoryoku jigyo. Energy shigen yuko riyo gijutsu kenkyu kokusaika chosa (koseido kasokudo keisoku system no kaihatsu chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report describes effectiveness of a system for measuring the acceleration and force in high accuracy by combining a laser interference meter and a vibration stand. A possibility of pressure sensitive paper to the impact force measurement in the collision examination is also described. The results obtained in FY 1997 are as follows. For the investigation of calibration system of acceleration and force sensor, one-dimensional interferometer system has been developed, which is standardized in ISO5347 accelerometer calibration. Thus, an interference fringe processing software has been made. Moreover, construction of a three-dimensional interferometer system has been started. For the characterization evaluation of pressure sensitive papers, it was succeeded in obtaining an elasticity wave pulse maximum about 1 msec by adopting the flight body made of resin. As a result, evaluation of the force sensor in the frequency area has become possible. To calculate the displacement of a body structural material in the collision experiment, an acceleration sensor has been made for trial purposes. For the international research cooperation, the working plan of a joint research with US Texas Christian University has been concluded. 11 refs., 73 figs., 23 tabs.

  4. Fiscal 1997 report on the results of the international standardization R and D. Study of safety of laser and light emitting diodes (LED) for human body; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Laser, oyobi hakko diode (LED) ni taisuru jintai eno anzensei no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    LD and LED are used in a wide range from telecommunication systems to residential/commercial equipment. Optical semiconductor devices existing in the domain between LD and LED are also being commercialized. In the field of this project, there are a lot of contradictions about the international standards. For the purpose of promoting the common understanding of standards and improving the consistency, the paper examined mainly safety, principles of motion and various applications of laser and LED, and developed international standards for the output measuring method. At the same time, the paper systematically studied the biological safety, determined regulatory values which were backed up as safety standards, and proposed/worked out a draft for new international standardization for safety of LED. Further, by the definition of laser in general, standards related to a lot of TCs among ISO and IEC standards were harmonized for the common understanding on the basis of a common idea. 40 refs., 163 figs., 6 tabs.

  5. Research cooperation promoting project in fiscal 1998. Research cooperation related to developing mine resources extraction and treatment technologies of environment harmonizing and high efficiency type; 1998 nendo kenkyu kyoryoku suishin jigyo. Kankyo chowagata kokoritsu kobutsu shigen chushutsu shori gijutsu no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to realize more effective utilization of non-ferrous metal resources, joint research cooperation is made with the Republic of Kazakhstan. It is intended that valuable metals (gold, silver, copper, rare metals, and others) contained at large quantity in ore scraps generated in association with mine operation be extracted and recovered efficiently paying considerations to the environment. The treatment process consists of the following conception: raw materials such as ore scraps are leached by sulfuric acid and microorganisms to separate and recover gold and silver; the leach liquor containing valuable metals is extracted by using solvent and recovered of copper and rare metals via an electrolytic process; and the waste water is treated and discharged. Fiscal 1998 has performed studies on the wet treatment system at the site and in Japan, the gold and silver treatment, and the waste water treatment by using samples collected from the site in fiscal 1996. Based on the results of these fundamental studies, a pilot plant was built, and all of the facility fabrication was completed in fiscal 1998. Part of the facilities has been transported to the site. To drive the project forward effectively, materials and items of equipment required for the joint research were procured and transported to the country, and at the same time Kazakhstanian researchers were received in Japan for training. (NEDO)

  6. Fiscal 1998 research report. Survey on development and application of membranes with pores of micron to nano-meter sizes; 1998 nendo chosa kenkyu hokokusho. Makuro kara mikuro (nano mezo dai) size wo motsu, menburenmaku no kaihatsu narabi ni oyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Researches on preparation of membranes of various materials have been promoted by not systematic technique but separate techniques according to needs of concerned fields. To establish the efficient technique for membranes with pores of required uniform size according to needs of various industries, survey and study were made on process optimization and low-cost production method. Porous membrane is the leading candidate for new separation systems as separation medium in chemical industry, hot gas filtration for energy production and environmental purification engineering. The electrode, separator and gas storage medium of fuel cell vehicles and next-generation batteries require effective porous materials. The workshop on engineering porous materials held in May 1993 confirmed the time of following materials: High-efficiency gas separation membrane, chemical catalytic membrane, fuel cell electrode and absorbent for environmental purification. Development of inorganic membranes more excellent in high-temperature stability, strength, catalytic activity and corrosion resistance than previous polymer membranes is important. (NEDO)

  7. Fiscal 1997 report on the results of the international standardization R and D. Study of the international standardization by the economic evaluation of environmental impacts; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Kankyo compact no keizai hyoka ni yoru kokusai hyojunka no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of the international standardization, conducted was a R and D of `the economic evaluation method of environmental impacts.` Survey/analysis were conducted of the trends in the U.S. and Europe where the study on environmental costs is advancing, and study systems were constructed in cooperation with Resources for the Future (RFF), the U.S. Electric Power Research Institute, the University of London, etc. As to impact analysis models, the development of environmental excrement transfer models has been finished, and the development of D-R relational equations which reflected characteristics in Japan has been started. In the joint study with the U.S. RFF, conducted were survey/analysis using the CVM (contingent valuation method). By the comparison of the survey data with actual medical data and comparison with the economic value conversion method, etc., validity and consistency of the CVM method were verified. As a result, it was found that these survey data could be explained without inconsistency. A case study of the environmental cost evaluation was made for electric power, iron/steel and electricity, and it was verified that this developmental method was fully applicable to the environmental impact evaluation of the actual production system. 27 refs., 33 figs., 89 tabs.

  8. FY 1995 report on the results of the investigational study on the technology development for the commercialization of solar systems for industrial use, etc. - Investigational study on the solar system. Investigational study on a solar heat utilization system; 1995 nendo sangyoyonado solar system jitsuyoka gijutsu kaihatsu seika hokokusho. Solar system no chosa kenkyu (taiyonetsu riyo system ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This survey clarifies the present situation of the solar heat utilization technology mostly for industrial use, makes a concrete concept of solar heat utilization clear, and extracts items of the technology development and evaluates sociality, economical efficiency, etc. It aims at working out a program for the future technology development. The following proposals were made: 1) technology development program; 2) simulation soft development program; 3) experimental field of the solar heat utilization technology. In 1), concepts of technology development are 'medical use boiling pasteurization,' 'temperature increase in the metal surface treatment process,' 'water purification using photo-catalyst,' 'distributed small power system,' and 'waste water treatment using bio-technology.' In 2), cost reduction is needed for commercialization/merchandising of technology, and therefore, the development of simulation software is studied. In 3), as the experimental field from commercial/residential use system to industrial use system, an large-scale and systematical experimental field is proposed where all that can be substituted for by solar energy among the energies required for the urban function are used. By this, the solar heat utilization system gets accustomed to the people, increases the reliability, and clearly leads to the course to the next stage of the R and D. (NEDO)

  9. FY 2000 report on the results of the development of the program system CO2 fixation/effective utilization technology. Development of the technology to assess global warming gas recovery/emission control by restoring/preserving the tropical mangrove coastal ecosystem; 2000 nendo program hoshiki nisanka tanso koteika yuko riyo gijutsu kaihatsu seika hokokusho. Mangrove nado nettai engan seitaikei no shufuku hozen ni yoru chikyu ondanka gas kaishu hoshutsu yokusei hyoka gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of developing the technology to assess the CO2 storage amount using the tropical mangrove coastal ecosystem, survey was conducted in the mangrove tree area in Ishigaki island, Japan and in Trat province, Thailand, and a draft of the assessment method was worked out. As to the assessment of the CO2 existence amount by analysis of satellite pictures, the regression equation between the mangrove existence amount and Landsat satellite data was determined to study a method for assessment of the CO2 storage amount in the whole area for survey. Further, using the relational equation between NDVI and LAI, vegetation indices reflecting vegetation conditions, methods to estimate the CO2 absorption amount by photosynthesis of mangrove tree community, the CO2 emission amount by respiration and the net production amount. Concerning the technology to assess the terrestrial area photosynthesis CO2 absorption amount, methods were studied for direct measurement of the amount of photosynthesis/respiration of the leaf area of mangrove tree community and the respiration amount by area such as trunk, branch and root and for assessment of CO2 absorption amount. Besides, studies were made on a variety of items such as the CO2 absorption/emission amount by underwater photosynthesis/respiration and decomposition of organic substances, the seawater exchange amount, and the rate of decomposition of organic substances. (NEDO)

  10. FY 1999 report on the results of the project on the industrial science technology R and D. Development of utilization technology of biological resources such as bioconsortium system (Development of the petroleum substituting fuel production technology using living organisms); 1999 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugou seibutsukei tou seibutsu shigen riyo gijutsu kaihatsu (Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of developing the technology for producing and degrading useful substances using bioconsortia, study was made of the handling technology of bioconsortia, the basic element technology, etc., and the FY 1999 results were reported. In the study of the high-grade utilization technology of lignocellulose/the components, an sample was obtained in which the effect of the bacteria culture supernatant treatment was recognized in the biobleaching by co-treatment of the bacteria culture filtrate - MnP. As to the search for control factor of lignin degrading enzyme and the utilization technology, it was found out that bisphenol A was efficiently degraded by a combination of laccase and mediator production bacteria. Concerning the utilization technology of plant symbiotic bacteria, classification/identification have been finished of approximately 60% of the stored bacteria. In the study of the production technology of the petroleum substituting useful resource, a system was constructed in which immature embryos were used for callus induction and regeneration of plantlets, and plants were regenerated at high frequency via the formation of adventitious embryos. By this, the culture cell with high propagation ability was obtained. (NEDO)

  11. Fiscal 2000 achievement report on project for research and development of technologies for intelligent infrastructure creation and utilization. Development of high-efficiency protein expression system (Development of high-efficiency protein expression system utilizing protein folding mechanism of hyperthermophile); 2000 nendo chiteki kiban sose riyo gijutsu kenkyu kaihatsu jigyo seika hokokusho. Kokoritsu tanpakushitsu hatsugen system no kaihatsu (Cho konetsukin no tanpakushitsu oritatami kiko wo riyo shita kokoritsu tanpaku hatsugen system no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Studies were conducted aiming at a heterogenic expression system, with E. coli acting as the host, capable of high-efficiency expression of the protein of hyperthermophiles, hyperthermophilic archaebacteria in particular. In this fiscal year, 9 kinds of enzymes were caused by E. coli to express from the genomes of P. Horikoshi, A. pernix, etc., and examined for characteristics. Concerning the L-proline dehydrogenase obtained by the screening of hyperthermophiles of the Thermococcus profundus genus, it was noted that the ferredoxin was possibly a natural acceptor of electrons and that it was possibly an amino acid dehydrogenase of an utterly new category. Furthermore, it was found that the NADkinase of Pyrococcus horikoshii was a unique heat-resistant enzyme which used the inexpensive polyphosphoric acid instead of expensive ATP (adenosine triphosphate), and this justified a hope that it would be quite useful in the industrial production of NADP (H) (nicotinamide adenine dinucleotide phosphate). A success was attained in uniformly refining the glutamate dehydrogenase of hyperthermophilic and inactive Pyrobaculum islandicum produced by E. coli. (NEDO)

  12. FY 1999 project on the development of new industry support type international standards. Standardization of a method to evaluate the performance of open robot use communication interface in production system, etc.; 1999 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Seisan system nado ni okeru open robot yo tsushin interface no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of standardizing the communication interface system between personal computers and robots, the R and D were conducted on ORiN (Open Robot Interface for the Network), and the FY 1999 results were summed up. ORiN is composed of the provider part, kernel part and application logic part. The provider absorbs differences in expression and protocols of robot controller data of each company and conveys them to the kernel part. The kernel part is composed of RAO and RDF. RAO adopts the disperse object model DCOM technology and supplies the network transparency and common access method to robot. RDF supplies files with expansion of robot structure models using XML. By this, ORiN was made adoptable for future, permitting differences in each robot. In the International Robot Exhibition held in October 26-29, 1999, the prototype of ORiN was jointly demonstrated by each company. (NEDO)

  13. Project in fiscal 2000 of developing international standards for supporting new industries. Standardization of communication interface for open robots in production system; 2000 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Seisan system nado ni okeru open robot yo tsushin interface no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to realize the open use between robot controllers and personal computers on the communication level, R and D has been performed on the standard API required for structuring the applications to use robot information on the personal computers. A draft of the international standard was prepared. This paper summarizes the achievements in fiscal 2000. The current fiscal year has executed improvements on the standard API software, as well as the demonstration tests. The following achievements were obtained: problems in practical use based on the demonstration tests of RAO ver. 0.5 were extracted and rectified; the standard API (Ver0.9) given additional functions including file transfer was developed; the specifications for the standard API (Ver1.0) were compiled based on the result of discussions on the major application functions; as a result of the demonstration test on reliability of the standard API (Ver0.9), performances were verified when the API is connected under different structural and using conditions; and a resolution was made at the ISO/TC184/SC2 international conference that 'continuation is encouraged on the present R and D expected as a proposal for the new work items'. (NEDO)

  14. Fiscal 1997 report on the verification survey of geothermal exploration technology. 5-1. Development of the reservoir variation survey method (technology of prediction of reservoir variation); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the reservoir evaluation at an initial developmental stage and stabilization/maintenance of power after the start of operation, the fiscal 1997 result was described of the study of technology of prediction of reservoir variation. Using the conventional post processor, feasibilities were computed of reservoir models and behavior after the development, and gravity/self potential/resistivity variation. Variation in the seismic wave speed structure was large in travel time change distribution. The measuring accuracy of 1m sec is required to get enough detection resolving power. A conceptual design of the post processor development was conducted to study a system operated on Windows. Based on the reservoir numerical simulation technology, by taking in variation parameters such as gravity and self potentials as new model constraint conditions, the reservoir modeling technology which increased in accuracy by history matching was trially developed. Using the conventional reservoir model in the Oguni area, predictably computed were reservoir behaviors during 50 years which simulated a 20 MW development. Effectiveness of the post processor were able to be shown though influenced by characteristics such as permeability and resistivity. 74 refs., 95 refs., 12 tabs.

  15. Fiscal 1997 report of the verification research on geothermal prospecting technology. Theme 5-2. Development of a reservoir change prospecting method (reservoir change prediction technique (modeling support technique)); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. 5-2. Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu (modeling shien gijutsu)) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To evaluate geothermal reservoirs in the initial stage of development, to keep stable output in service operation, and to develop a technology effective for extraction from peripheral reservoirs, study was made on a reservoir variation prediction technique, in particular, a modeling support technique. This paper describes the result in fiscal 1997. Underground temperature estimation technique using homogenization temperatures of fluid inclusions among core fault system measurement systems was applied to Wasabizawa field. The effect of stretching is important to estimate reservoir temperatures, and use of a minimum homogenization temperature of fluid inclusions in quartz was suitable. Even in the case of no quartz in hydrothermal veins, measured data of quartz (secondary fluid inclusion) in parent rocks adjacent to hydrothermal veins well agreed with measured temperature data. The developmental possibility of a new modeling support technique was confirmed enough through collection of documents and information. Based on the result, measurement equipment suitable for R and D was selected, and a measurement system was established through preliminary experiments. 39 refs., 35 figs., 6 tabs.

  16. Antidepressant behavioral effects of duloxetine and amitriptyline in the rat forced swimming test Efeitos antidepressivos da duloxetina e da amitriptilina no teste do nado forçado em ratos

    Directory of Open Access Journals (Sweden)

    Honório Sampaio Menezes

    2008-10-01

    Full Text Available PURPOSE: To compare the effects of the antidepressant drugs duloxetine and amitriptyline on depressive behaviors in rats. METHODS: Fifteen male Wistar rats were given systemic injections of duloxetine, amitriptyline or saline prior to a Forced Swimming Test (FST. Immobility and number of stops were measured. Data were analyzed by one-way ANOVA and Kruskall-Wallis. RESULTS: Rats given injections of duloxetine displayed fewer stops than the amitriptyline and control group (pOBJETIVO: Comparar o efeito antidepressivo da droga cloridrato de duloxetina com a amitriptilina. MÉTODOS: O teste do nado forçado, teste comportamental que avalia a atividade antidepressiva em ratos, foi utilizado em 15 ratos Wistar, machos adultos, divididos em três grupos iguais: duloxetina, amitriptilina e controle. Os dados foram analisados pelo teste One-way ANOVA e Kruskall-Wallis. RESULTADOS: Houve diferença significativa entre o número de paradas (p <0,05 entre os grupos duloxetina e amitriptilina e o grupo controle. Grupo amitriptilina e controle não apresentaram diferença (p=0,8. CONCLUSÃO: A duloxetina reduziu o comportamento depressivo sendo mais efetiva do que a amitriptilina.

  17. Comportamento de variáveis fisiológicas em atletas de nado sincronizado durante uma sessão de treinamento na fase de preparação para as Olimpíadas de Atenas 2004 Comportamiento de variábles fisiológicas en atletas de nado sincronizado durante una sesion de entrenamiento en la fase de preparación para las Olimpíadas de Atenas 2004 Behavior of physiological variables in synchronized swimming athletes during a training session preparing for the Athens 2004 Olympic Games

    OpenAIRE

    Marina Guimarães Antunes Pazikas; Andréa Curi; Marcelo Saldanha Aoki

    2005-01-01

    O objetivo do presente estudo foi avaliar o comportamento de variáveis fisiológicas durante uma sessão de treino de nado sincronizado realizada na fase de preparação para as Olimpíadas de Atenas 2004. MATERIAIS E MÉTODOS: A amostra utilizada foi constituída pelo dueto (24 ± 0 anos) representante do Brasil em Atenas 2004. A coleta de dados foi realizada durante uma sessão de treinamento com duração de 198 minutos. O treino se iniciou com a parte física, seguida da parte técnica. Para a determi...

  18. Neonatal treatment with fluoxetine reduces depressive behavior induced by forced swim in adult rats Tratamento neonatal com fluoxetina reduz o comportameto depressivo induzido pelo nado forçado em ratos adultos

    Directory of Open Access Journals (Sweden)

    Cristiano Mendes-da-Silva

    2002-12-01

    Full Text Available Serotonin plays a role at the pathophysiology of depression in humans and in experimental models. The present study investigated the depressive behavior and the weigh evolution in adult rats (60 days treated from the 1st to the 21st postnatal day with fluoxetine, a selective serotonin reuptake inhibitor (10 mg/kg, sc, daily. The depressive behavior was induced by the forced swim test (FST. The animals were submitted to two sessions of FST: 1st session for 15 min and the 2nd session 24h later, for 5 min. During the 2nd session the Latency of the Attempt of Escape (LAE and Behavioral Immobility (BI were appraised. The Fluoxetine group when compared to the Control group, showed an increase in LAE and a decrease in BI. The neonatal administration of fluoxetine reduced the depressive behavior in adult rats, possibly by increase in the brain serotonergic activity. This alteration can be associated to process of neuroadaptation.Estudos em humanos e em modelos experimentais demonstram que a serotonina (5-HT participa da fisiopatologia da depressão. O presente estudo investigou o comportamento depressivo e a evolução ponderal de ratos adultos jovens (60 dias tratados do 1º ao 21º dia pós-natal com fluoxetina, um inibidor seletivo de recaptação da serotonina, (10 mg/kg, sc, diariamente. A depressão experimental foi induzida através do teste de nado forçado (NF. Os animais foram submetidos a duas sessões de NF, a primeira por 15 min e a segunda após 24 h, por 5 min. Durante os 5 min de NF a latência da tentativa de fuga (LTF e o tempo de imobilidade (TI foram avaliados. O grupo tratado com fluoxetina apresentou aumento da LTF e redução do TI comparado ao controle. A administração neonatal de fluoxetina reduziu o comportamento depressivo em ratos adultos, possivelmente em função do aumento da atividade serotoninérgica cerebral. Esta alteração poderá estar relacionada a processos neuroadaptativos.

  19. Research and development project of regional consortiums in fiscal 1998. Research and development of regional consortium energy (development of measuring technology to aid energy conservation in electronic device manufacturing processes (design and trial production of IMI) (Report on the result in the first year)); 1998 nendo chiiki consortium energy kenkyu kaihatsu. Denshi kikirui seizo process no sho energy shien keisoku seigyo gijutsu no kaihatsu (IMI no sekkei to shisaku) (dai 1 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper summarizes the development of intelligent micro instruments (IMI) inaugurated in fiscal 1998 as the wide-area consortium project for the Tama area. Research and development will be carried out on the following items: IMI substrate elements utilizing micro machining technology, applicable to micro sensors and micro probes, semiconductor process sensors, electronic device measuring probes, signal processing and communication circuits for wireless sensing. This paper describes the achievements during fiscal 1998. Technologies were transferred from the Mechanical Engineering Laboratory of the Agency of Industrial Science and Technology on silicon micro machining and PZT piezoelectric thin film formation. An IMI research laboratory was installed at the Tokyo Metropolitan University. In developing the IMI substrate elements, different beams applicable to sensors and probes were fabricated on a trial basis, and their mechanical properties were measured. For the semiconductor process sensors, discussions were given on micronization on a chlorine ion analyzer. In developing the electronic device measuring probes, the target was placed on measurement of in-situ characteristics of IC chips on a wafer. A prototype transmitting and receiving circuit board was fabricated for developing the wireless sensing. (NEDO)

  20. FY 2000 report on the results of the regional consortium R and D project - Regional consortium energy field. First year report. Development of the process for creation of new functional materials using electron beam excited plasma; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium energy bun'ya. Denshi beam reiki plasma wo mochiita shinkino zairyo sosei process no kaihatsu (dai 1 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The development of manufacturing technology was proceeded with for a high speed nitriding system using electron beam excited plasma device which realizes high dissociation for nitrogen molecules and controls the plasma state. By the device, the following are aimed at: high quality/high speed nitriding, formation of super-hard cubic system boron nitride (c-BN) and carbon nitride (CN) films on the surface of tools, and formation of TiO{sub 2} thin films with high infrared reflectance and environmental purification photocatalyst function. TiO{sub 2} thin films are assumed to be applied to window glass by making use of the high performance heat mirror function as well as the environmental purification function. Studies were made in the following 6 fields: 1)development of small electron beam excitation plasma source; 2) development of high speed nitrided container; 3) establishment of technology for real-time monitoring of radicals and ions; 4) design/trial manufacture of a device to form super-hard nitrided thin films; 5) development of heat mirror film formation device; 6) establishment of a method to evaluate effects of photocatalyst. (NEDO)

  1. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the synthesis and processing of advanced biomaterials (fixation and effective utilization of carbon dioxide using peptides); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu (peptide oyo nisanka tanso koteika yuko riyo gijutsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In fiscal 1997, study was made on formation of peptides with a biogenic function and molecular recognition function, and peptide materials. The existing automatic design technique of peptides including non-natural amino acids was applied to design of complementary peptides of proteins with known structures to optimize a development technique of ligand. Practical function of peptides as advanced receptor ligand was verified by applying the existing conformation control technique to stable holding of peptide active conformation. Creation of bio-materials, and development of preparation technology of bio-substrates and materializing technology of functional molecular materials were carried out. To construct an electron transfer system by self- organized body of peptides formed on a substrate, a peptide molecular device was prepared and verified using linkers. To use peptides as photoelectron functional molecule, metallized peptide with main helix structure was prepared. The possibility of molecular materials with a fixation function of CO2 was examined. A high-sensitivity bio-sensor was also mentioned. 75 refs., 130 figs., 25 tabs.

  2. FY 2000 report on the results of the regional consortium R and D project - Regional consortium energy field. Second year report. Development of the energy saving manufacturing process of smart materials having electromagnetic wave absorbing function using the microwave-hydrothermal method; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki contortium energy bun'ya. Micro ha - suinetsuho wo riyoshita denjiha kyushu kino wo yusuru smart zairyo no sho energy gata seizo process no kaihatsu (dai 2 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The development was proceeded with of electromagnetic wave absorbing materials (board) which dispersed carbon fiber as conducting material and ferrite as magnetic material to matrices such as resin and cement. With the multi-layer structure as a basis, the material has wave absorbing ability in the area of 300MHz-60GHz band. The material is presumed to be applied to wall construction use materials and bodies of electronic equipment since it prevents the radio wave reflection caused by structures such as bridges. Ferrite was synthesized by microwave-hydrothermal method (500kPa, 2.54GHz). Further, carbon fiber was covered with ferrite for improvement of absorption characteristics. Studies were made in the following 5 fields: 1) design of smart materials and development of hybrid process technology; 2) study on the evaluation of wave absorbing function; 3) R and D of the manufacturing process of smart forming materials; 4) development of the fiber surface processing process using ocean resource; 5) comprehensive investigational study. In 1), study was conducted on relations among electromagnetic shielding characteristics of the ferrite-covering carbon fiber, fiber length and fiber content. (NEDO)

  3. Achievement report for fiscal 1998 on area consortium research and development business. Area consortium for venture business development by building base for small business (high-efficiency superhigh-accuracy grinding technology by nano-scale in-process measurement and control using novel grinding wheel); 1998 nendo venture kigyo ikuseigata chiiki consortium kenkyu kaihatsu (chusho kigyo sozo kibangata). Shingata kensaku toishi wo mochiita nano in-process keisoku seigyo ni yoru konoritsu choseimitsu kensaku kako gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim is to develop a superflat grinding system for functional devices such as hard disks and magnetic heads. Cast iron powder is used as bonding material high in reacting with diamond for an increase in the anchoring power. A chemical reaction occurs to realize a strong bond between the two, producing a precision grinding wheel long in life and high in efficiency. A wheel with some hollows is also developed in which the grits have to bear more load because of the hollows, this achieving grinding efficiency five times higher than that of other types of the same grit size. A system is developed, provided with a constant pressure mechanism for the grinding direction and constant travel mechanism normal to the work surface. Using the constant pressure system, the grinding speed depends on the wheel grinding capability, and then the wheel is allowed to exhibits its best. The system suffers less clogging than the conventional ones. The specific grinding energy which is the index of the match between the wheel and the work may be determined, and this enables prompt condition optimization. It is proved that the wheel with hollows is remarkably higher in grinding capability than wheels of the same grit size on the market. The two are found to be alike in achieving top-class finish in terms of surface coarseness and flatness. (NEDO)

  4. Fiscal 1994 New Sunshine Program achievement report. Development of photovoltaic power generation system practicalization technology - Research on practicalization of thin-film solar cell manufacturing technology (Technology for higher quality - Development of CuInSe{sub 2} solar cell manufacturing technology); 1994 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu (kohinshitsuka gijutsu (CuInSe{sub 2} taiyo denchi seizo no gijutsu kaihatsu))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The aim is to develop solar cells that exhibit conversion efficiency of 12% in a 10cm times 10cm-large minimodule. When a substrate made of soda lime glass with an SiO{sub 2} coating thereon is used, high reproducibility is achieved in the manufacture of CuInSe{sub 2} (CIS) thin-film solar cells. For the manufacture of a high-quality Cu(InGa)Se{sub 2}(CIGS) light absorbing thin-film layer, it is necessary to develop high-quality precursor film manufacturing and gas phase selenization technologies. A laminated precursor film formed by sputtering is selenized in a H{sub 2}Se gas atmosphere for the formation of CuInSe{sub 2} and CIGS light absorbing thin-film layers, and 16 ZnO/CdS/CIS-structured thin film solar cells built into a 10cm times 10cm-large substrate exhibit conversion efficiency of 11.6%. A CIGS cell using a sulfur-containing Zn compound buffer layer exhibits conversion efficiency of 12.1%. Conditions for the manufacture of a ZnO:Al transparent conductive film are studied. Dependence of CIS-based solar cell output characteristics on temperature and irradiation may be compensated for under the JIS (Japanese Industrial Standard) compensatory formula. The CIS-based thin-film solar cell suffers but a little reduction in output due to temperature rise, and may be therefore said to be excellent. (NEDO)

  5. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium field / Development of technology to treat aquatic environment by using microorganisms fixed on carbon fabrics (abbreviation: carbon/aquatic environment project) (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium bun`ya / tanso sen`i nansoshiki eno biseibutsu kochaku gensho wo riyoshita mizukankyo seibi gijutsu no kaihatsu (ryakusho: tanso mizu kankyo project) daiichi nendo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Out of the development of technology to arrange the aquatic environment using phenomena of microorganism fixation on carbon fiber soft textures, the paper stated the fiscal 1997 result. On carbon fibers in a state of swaying in water, microorganisms in water fix in an amazingly large quantity. A catalog was compiled of 58 kinds of carbon fabrics trially woven and knitted. When carbon fiber is used as activated sludge carrier, activity of microorganism lasts more than one year. Only a little amount of surplus sludge is generated. The fixed microorganisms are more active in case of carbon fiber than in case of nylon and polyester fibers. Fiber texture models of carbon fiber fixing activated sludge groups were proposed. By pump operation, the water flow inside/outside microorganism groups is being accelerated. Several new strains of bacillus carboniphilus were isolated/identified from soil and marsh. To grasp relationships of characteristics among three elements such as the state of aquatic environment, fiber, and microorganism group, the experiment was prepared. Preliminary work is conducted to derive a simple equation for facility design, and experimental directions to obtain design conditions were proposed. 6 refs., 166 figs., 47 tabs.

  6. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium energy field / Development of an environmentally friendly industrial cleaning system using near-critical and supercritical carbon dioxide (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium energy bun`ya / chorinkai ryutai wo mochiita kankyo chowagata kogyo senjo sochi no kaihatsu (daiichi nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the manufacturing process of semiconductors and in the high tech industry, cleaning is indispensable. At present, when regulation of the use of CFC which used to be much used has been decided on, the conversion to the use of substitutes for CFC cleaning is urgently needed. Transfer to cleaning by water/alcohol/hydrocarbon has been proceeded with, but there are a lot of problems. Out of the development of the cleaning method using supercritical fluid, the paper described the fiscal 1997 result. As to enhancement of efficiency and decrease in size of equipment, a cleaning experiment by high pressure CO2 around the critical point was conducted by integrating nozzle, ultrasonic generator and cavitation generator and adding solvent circulating system. Multi-purpose and energy saving of the equipment were also studied. To establish an analysis method for the cleaning degree, the contaminated component film of trace organic matter with a specified thickness was formed on the silicon wafer, and using the Fourier transform ultrared spectroscopy, a method to determine the film thickness was studied. For the function evaluation for precision machine parts and determination of optimum cleaning conditions, the cleaning/degreasing process of valves were compared with the conventional method. For the product manufacturing, the paper investigated and prepared the data in Japan and from abroad. 55 refs., 79 figs., 18 tabs.

  7. Achievement report for fiscal 1998 on area consortium research and development business. Area consortium for venture business development by building base for small business (computer-controlled PCM-aided constant-temperature cracking and multimetal-smelting Technology); 1998 nendo venture kigyo ikuseigata chiiki consortium kenkyu kaihatsu (chusho kigyo sozo kibangata). Computer seigyo ni yoru PCM koon seigyo bunkai obyobi multi smelting giho no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Treatment of domestically produced waste of electrical appliances is studied, for which an energy-efficient constant-temperature cracking unit (medium/low-temperature cracking furnace) working on the PCM (phase change material) technology and a multimetal smelter (high-temperature cracking furnace) are combined. The system is to recover, regenerate, and reuse the valuables efficiently at low cost without allowing any waste out, and a resources cycle is established beyond the thermal cycle, which will to promote the recycling of used resources. As one of promising PCM materials, Al-Si excellent in thermal response is selected, and kept at 578-579 degrees C for one hour. The result obtained indicates that, once the PCM is molten, homogenous conditions may be restored semipermanently by heating but supplementarily to cover the lost heat, and that therefore it is a promising candidate for a heat source. Data are also collected about temperature control and auxiliary materials to be injected, necessary for collection from the smelter, and some metal was recovered. With a PCM layer enclosing the heated material, a computer-aided automatic control system is realized capable of adjusting the temperature to stay at a constant level. (NEDO)

  8. FY 2000 Report on the results of international cooperative research scheme (power generation - No.3). Developmental research on high-performance plasma-assisted fine coal powder combustion mechanism for coal-fired power generation boilers to realize oilless ignition; 2000 nendo kokusai kyodo kenkyu teian kobo jigyo seika hokokusho (hatsuden No.3). Oilless chakka wo jitsugensuru sekitan karyoku hatsuden bifuntan nenshoroyo koseino plasma jonen kiko no kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the results of the developmental research on the high-performance plasma-assisted fine coal powder combustion mechanism for coal-fired power generation boilers, a theme adopted by the international cooperative research scheme. The program for design/manufacture of the plasma torch manufactures laminar type torches for 100kW high power class and 10kW middle class. The high-performance plasma-assisted combustion mechanism is designed and manufactured using the torch. It has a structure which supplies secondary air and secondary coal flow to the primary coal flow. It is tested for starting up a commercial boiler firing finely pulverized coal, to confirm its functions. The tests for optimizing the oilless ignition and operation are conducted in Tashtagonal Iron Plant and Berdsk Chemical Plant. It is found that the cold start can be realized in the boiler, when the muffle burners are preheated for 30 to 40 minutes before the finely pulverized coal is supplied and the steady-state coal combustion is attained 3 to 5 minutes after the coal is supplied. The program for the combustion basics for the plasma-assisted mechanism collects the data related to its dependence on coal type. (NEDO)

  9. Estudio preliminar de la expresión proteómica cerebral de la región hipocampal de ratas expuestas a diferentes niveles de estrés inducido por el nado forzado Preliminary study of cerebral proteomics expression of hippocampal region from rats exposed to different stress levels induced by forced swimming

    Directory of Open Access Journals (Sweden)

    Guerrero Nasser

    2012-04-01

    Full Text Available Introducción: en general, los estímulos estresores pueden inducir respuestas adaptativas o mal adaptativas dependiendo, entre otras cosas, de su intensidad y la duración. Sin embargo, no se han llevado a cabo estudios que relacionen cuantitativa y cualitativamente la intensidad de estrés al que es expuesto un animal y la expresión de proteínas del hipocampo. Objetivo: evaluar la expresión diferencial de proteínas hipocampales en ratas Wistar-UIS, expuestas a diferentes niveles de estrés inducido por el nado forzado. Materiales y métodos: se utilizaron 30 ratas Wistar-UIS machos distribuidas aleatoriamente en 3 grupos según el tiempo de exposición al nado forzado como estímulo estresor (0, 5 y 15 minutos. Después de 24 horas se extrajeron los hipocampos dorsales y se realizó electroforesis bidimensional de las proteínas extraídas. A continuación, se llevó a cabo el procesamiento de las imágenes de los geles obtenidos utilizando el software PDQUEST 2D. Aquellas proteínas en las se detectaron intensidades asociadas a los tiempos de exposición al estímulo, se identificaron de manera presuntiva utilizando la base de datos bioinformática Export Protein Analysis System (EXPASY. Resultados: de acuerdo con el análisis proteómico y bioinformático se identificaron 60 proteínas, de las cuales, 38 eran comunes al hipocampo derecho e izquierdo; 13 del hipocampo derecho y 9 del izquierdo. Conclusión: se encontraron diferencias en la expresión de proteínas entre el hipocampo derecho e izquierdo del tipo dosis dependientes decrecientes después de haber sometido a los animales a diferentes niveles de estrés inducido por la prueba de nado forzado. Salud UIS 2012; 44 (1: 17-27Introduction: in general stressful stimuli can induce adaptive maladaptive responses, depending among other things, of their intensity and duration. However, no studies were found in the literature that link quantitatively and qualitatively the intensity of

  10. Fiscal 1998 achievement report on regional consortium research and development project. Venture business raising type regional consortium - small business creating base type (Research and development of Peltier actuating device-aided advanced medical and welfare systems - 2nd year); 1998 nendo Peltier undo soshi wo mochiita kodo iryo fukushi system no kenkyu kaihatsu seika hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Efforts are made to develop a new Peltier actuating device by amalgamating a Peltier device and shape memory alloy and to apply the product to medical and welfare activities. In the development of active movement control for a Peltier actuating device, a multiaxial control system is developed, and a success is attained in high-speed and high-precision control of temperature and in current- and voltage-aided control of the behavior. In the development of an active actuator for catheters, an active catheter is developed for the first time, capable of performing twisting and bending simultaneously. In the development of an artificial heart catheter, an approximately 10cm-long Peltier actuating device is manufactured to serve as an artificial heart module, and a controller is developed to drive the module at the frequency of approximately 0.5Hz. In the development of shape memory alloys and Peltier devices for normal temperature actuation, the impact is examined of the addition of a third element on the transformation temperature and shape memory characteristics. Research and development is also carried out for element technologies for using a Peltier actuating device as an artificial muscle. (NEDO)

  11. Achievement report for fiscal 2000 on operational research of human cooperative and coexisting (humanoid) robot system. Development of energy usage rationalizing technology; 2000 nendo ningen kyocho kyozongata robot system un'yo kenkyu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper reports the achievements in fiscal 2000 in the operational research on the human cooperative and coexisting (humanoid) robot system to rationalize energy usage. Operational method and maintenance were studied on the platform hardware that has been developed in the previous fiscal year. Checks were given periodically on the robot platform hardware, and no anomalies were verified in all operation. Verifications were made on the fasteners, additional tightening, fitting of the connectors, battery checks, zero position and step response checks, and output checks on the force component sensor, gyro sensor and G sensor. For the virtual robot platform, discussions were given on the basic movement library for the geography complying three-dimensional walking. Such configurations were constituted that integrated use is possible with the simulator system by connecting the networks, and the user can instruct the CORBA server with the generation of walking movements according to the GUI by using the general purpose WWW browser to connect it to the HTTP server, whose result can be verified by three-dimensional graphics. A method to stabilize the all-axis movement servo model was made open to public. (NEDO)

  12. Fiscal 2000 report on result of R and D on robot system cooperating and coexisting with human beings. R and D on robot system cooperating and coexisting with human beings; 2000 nendo ningen kyocho kyozongata robot system kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    A highly safe and reliable robot is being developed capable of cooperating with human beings and executing complicated operations in a human working/living space. This paper describes the fiscal 2000 results. Development of robot motion library was continued for extended task for providing services to people in care houses for the aged controlling motions of the humanoid robot. A basic design for a personal service system by the humanoid robot was conducted with the aim of nursing assistance and for the objective of developing a portable terminal type tele-operation device. A public and a home cockpit were researched with the purpose of developing user interfaces for telexistence control. A dynamic simulator for humanoid robots was built, with motions of standing-up and walking examined, in order to develop basic theories for the dual-handed tasks aided by the leg-arm cooperative motion. To develop a robot that properly and safely cooperates and coexists with the human beings, it is essential to obtain a dynamically reasonable and natural control law, so that the basic studies were conducted in this direction. With the purpose of developing a motion capture and learning system, a virtual robot platform and an information acquiring interface were developed. Studies were also conducted on modeling technique for achieving realistic material properties from high-precision image synthesis and actual images. (NEDO)

  13. Achievement report for fiscal 2000 on operational research of human cooperative and coexisting (humanoid) robot system. Development for practical application of new power generation technology; 2000 nendo ningen kyocho kyozongata robot system un'yo kenkyu seika hokokusho. Shinhatsuden gijutsu jitsuyoka kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper reports the achievements in fiscal 2000 in the development for practical application of a new power generation technology for the human cooperative and coexisting (humanoid) robot system. Carrying out the development smoothly and efficiently requires accumulation of the system operational know-how, as well as the periodical check and maintenance to maintain the functions and performances of the robot platform having been developed in the previous fiscal year. Checks were given on the robot platform hardware, and no anomalies were verified in all operation. For the remote operation platform, normal operations were identified in the visual and audio information presenting and communication systems, including such components as the PCI, noise removing card, three-dimensional microphone, and SGI320. Operations were confirmed on the movement and operation sensing and presenting system, whereas no change has been found in the operation for the period of one year, and sufficient performance was maintained. For the virtual robot platform, the operation was made open to public on the basic operation library network interface. No operational defects, damages, wear, and electrical failures were found in the master hand for the remote control by hands, force sense presentation, finger and wrist position detection, and contact angle presentation. (NEDO)

  14. Report for fiscal 1998 on Simple Operation Type CAD/CAM System Development through International Cooperation. Report on the achievements of counterparts overseas; 1998 nendo 'kan'i sosagata denshi sekkei seian shien system no kaihatsu ni kansuru kenkyu kyoryoku' ni kansuru hokokusho. Kaigai counter part seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Concerning the subject matter, achievements of China, Indonesia, Malaysia, Singapore, and Thailand are reported. In China, a technical data transfer process is under development, designed to serve between CAD (computer-aided design)/CAM (computer-aided manufacturing) packages of different file formats. In Indonesia, WG1 activities are being conducted with the assistance of Toyota Motor Corporation, and WG3 activities with the assistance of Wacoal Corporation, Japan. In Malaysia, designing, development, and tests are under way for prototype systems of an electronic catalog, direct link to CAD/CAM, transfer and sharing of electronic manufacturing data, etc., all to be completed by March 1999. In Singapore, an electronic parts library is compiled, and a verification test is conducted involving response time, download time, etc. In Thailand, development is under way of an engineering browser, automobile industry-oriented WEB-based information center, etc. (NEDO)

  15. Fiscal 1997 report on the results of the international standardization R and D. System to make comprehensive evaluation of potential health effects of next generation image media; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Jisedai media seitai eikyo sogo hyoka system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper proposed the international standardization for the use of next generation image media by evaluating health effects of the use of next generation image media such as head mounted display and 3D monitor. A method to comprehensively evaluate health effects was studied with the design friendly to humans and standardization on safety as final targets. Themes were divided into the autonomous nervous system and the measuring system. The development was carried out of a method to evaluate the autonomous nervous function by the dynamic state of blood circulation and pupillary reflex as well as the development of portable sphygmomanometer and pupillometer. Using these developmental instruments and conventional instruments, measurement was made of blood pressure, cardiac output, respiration, pupil size, eyeball movement and focus accommodation. A possibility was suggested of obtaining the uniform elucidation also in case analytical changes of individual parameters cannot be extracted or consistency cannot be seen in the course of changes. The paper determined basic standards for the experimental use stereoscopic image, made measuring use 3D images, and collected realtime data by the overall simultaneous measuring system constructed. 109 refs., 166 figs., 18 tabs.

  16. Achievement report for fiscal 1998. Research and development on a new manufacturing method for functional thin films suitable for recycling, and their application to colored glasses (the second year); 1998 nendo seika hokokusho. Recycle ni tekishita kinosei usumaku no shinki seizoho to chakushoku glass eno oyo ni kansuru kenkyu kaihatsu (dai 2 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A new thin film manufacturing method is established to add a function to glass material surface, as a new material technology which harmonizes with global environment, and is suitable for resource re-utilization and energy conservation. It is intended to develop a leading technology to promote recycling of colored glasses by applying this technical method to colored glasses. Fiscal 1998 has implemented subsequently to fiscal 1997 the following subjects in the three research items composed of a new manufacturing method of functional thin films, application of the functional thin films to colored glasses, and the comprehensive investigative studies: establishment of an industrial manufacturing method for color coating liquid and evaluation of basic characteristics of the colored functional thin films, optimization of element technology for photo-sensitive gel films by means of chemically modifying metallic alkoxide, tests of forming films on glass bottles and plate glasses by using a coating machine installed in fiscal 1997, design and prototype fabrication of a new demonstration coating machine, and analysis on thermal decomposition of the colored thin films. Optimization was performed on the element technology for manufacturing sol-gel functional thin films, and a survey was carried out on recycling systems of colored glasses adopted in Europe. (NEDO)

  17. Base isolation system for earthquake protection of structures. (Part 9). ; Vibration tests and earthquake observation results from a 9 stories base-isolated building. Tatemono no menshin boshin koho no kenkyu kaihatsu. 9. ; 9 kaidate menshin building no shindo jikken kekka, jishin kansoku kekka

    Energy Technology Data Exchange (ETDEWEB)

    Koshida, H.; Yasaka, A.; Yamaya, H. (Kajima Corp., Tokyo (Japan))

    1991-10-31

    As a part of the development of base isolation systems for earthquake protection of structures, the result of vibration tests and earthquake observations was reported of a 9-story base-isolated building. To clarify vibration characteristics of the base-isolated building, static loading tests and forced vibration tests were conducted by installing four oil jacks between the earth retaining wall and first floor beams, and an exciter at the center of the first floor, respectively, and the horizontal stiffness of isolators, building natural frequency, damping constant and vibration mode were obtained. In addition, three earthquake response observations were recorded until March 1991 since completion of the building. As every harmonic frequency and the acceleration response ratio of superstructure/basement floor were measured at earthquake response, the average peak acceleration response ratios of roof floor/basement floor were 0.85 along a short side and 0.71 along a long side of the building, indicating the acceleration reduction effect proper to base-isolated buildings. 6 refs., 20 figs., 5 tabs.

  18. Base isolation system for earthquake protection and vibration isolation of structures. Part 11. ; System identification of vibration model and earthquake response simulation analysis of base-isolated building. Tatemono no menshin boshin koho no kenkyu kaihatsu. 11. ; Shindo kaiseki model no dotei to jishin oto simulation kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Koshida, H.; Ishida, M.; Yasaka, A.; Takenaka, Y.; Yamaya, H. (Kajima Construction Co. Ltd., Tokyo (Japan))

    1992-10-31

    Before the completion of the Toshin No.24 Omori Building (an earthquake protected building in Tokyo), a forced vibration test was performed to confirm the vibration characteristics and the rigidities of the laminated rubber bearing and the damper. Seismic observation was performed after the completion to confirm the effect of the earthquake protected building on decreasing acceleration response. A vibration analysis model built by identification method utilizing those data was used to carry out a simulation analysis of the earthquake on February 2, 1992 (5 seismic intensity in Tokyo) which recorded the largest ground motion acceleration since the observation was started in the building. Relative displacement of maximum 0.8cm was observed in the base-isolation layer at the time of the earthquake, and decrease in the natural frequency was also observed in the earthquake record. Reference, therefore, was made to the results of the past experiments to modify the rigidity of this portion only considering nonlinearity of the high damping rubber portion of the damper bearing. As a result, a simulated analytical result was obtained which agreed well with the observed values. 6 refs., 11 figs., 5 tabs.

  19. Achievement report for fiscal 1998 on area consortium research and development business, 1st year. Area consortium energy research and development (biofuel production by advanced function bioreactor); 1998 nendo chiiki consortium energy bun'ya. Kokino bio reactor ni yoru bio nenryo seisan ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Studies were made to produce ethanol directly from starch and cellulose and to collect biodiesel fuels from waste oil by an enzymatic method. For an increase in the yield of biodiesel fuel production, lipase enzymes were explored and optimum reaction conditions were sought for. Starch decomposition was quick for conversion into the target material in a system with the co-expression of amylase and glucoamylase present on the yeast cell surface layer. There was dramatically rapid progress in the increase of enzymatic activity in the cell, although dependent on cell membrane surface treatment conditions. In the generation of acetaminophen by recombinant cohesive yeasts, highly active and expressive yeasts were automatically fixed in the porous support (intelligent bioreactor) while those deactivated or dead were automatically removed. For the construction of a fuzzy control system for this reaction, basic models were investigated, built on the basis of the enzymatic model of reaction and substance balance. A high-precision structural analysis was conducted for the exploration of secondary structure stabilizing factors in protein and peptide and for the elucidation of correlations between structure and function. (NEDO)

  20. Survey report for fiscal 1998. Survey of the current state and tasks of research and development of technologies for effectively utilizing CO{sub 2} fixation by higher vegetation; 1998 nendo chosa hokokusho. Koto shokubutsu ni okeru nisanka tanso koteika yuko riyo gijutsu no kenkyu kaihatsu no genjo to kadai ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Investigations and studies are conducted seeking for a CO2 fixation method improved by utilizing the photosynthesizing function of higher vegetation. Details of higher vegetation genes are being disclosed thanks to the rapid progress of studies making use of molecular biological techniques, and the application of the genetic mechanism to scientific and technological fields is becoming increasingly feasible. In particular, the role of the CO2 fixation enzyme RuBisCO has been elucidated almost completely. It has been learned that, in terms of photosynthesizing capability, the C{sub 4} plants (corn etc.) are 2-3 times higher than the C{sub 3} plants (rice, wheat, etc.), and 5-10 times higher than the CAM plants (cactuses etc.). Studies are also under way about the rice genome so that a photosynthesizing capability so high as that of the C{sub 4} plants may be endowed the rice plant. The metabolism and control of useful substances produced in the CO2 fixation process etc. in the higher vegetation are being investigated, and it is now expected that some day such useful substances will be produced and utilized efficiently. Researches are under way into the relationship between the green leaf that is the organ that performs photosynthesis and the organ (sink) that stores and utilizes starch and sugar is in progress, and now a new field is going to open where vegetables will be fully utilized. (NEDO)

  1. Study on the large-scale photovoltaic (PV) power generation in desert of China and its utilization. Development of energy and agriculture in solar farm; Chugoku ni okeru ogata taiyoko hatsuden to sono riyo ni kansuru kenkyu. Solar farm ni yoru energy to nogyo kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Nishioka, S.; Ohashi, Y.; Ito, H. [Tokyu Construction Co. Ltd., Tokyo (Japan); Ojima, S. [Maeda Corp., Tokyo (Japan)

    1997-01-30

    This paper proposes solar farm, a system suitable for China`s present circumstances, and describes its development plan. In this plan, agriculture and stock farming are promoted through irrigation using PV power in the desert zone, middle-east China. In addition, electric power is produced by laying PV power generation modules. The solar farm has 100 blocks of farmland equivalent to 700 ha, which includes 300 farmhouses (population of 1200). It can be a food supply base producing rice and wheat. The power generation capacity is at least 1000 kW, and the night power is supplied by battery installed in each farmhouse. The power generated in the daytime is used not only for agriculture but also for secondary industry such as processing of agricultural and stock farming products. The Chinese government requires 300,000 ha of farmland development every year up to 2030, the peak of population. When a half of this is developed by the solar farm, 200 solar farms are to be developed every year. For 30 years, 6000 solar farms are to be developed. 5 refs., 1 fig., 1 tab.

  2. FY 1998 annual summary report on research and development of metal-based, heat- and wear-resistant composite materials with controlled mesoscopic diplophase structures (second year); 1998 nendo mesosukopikku fukuso soshiki seigyo tainetsu taimamosei kinzokuki fukugo zairyo no kenkyu kaihatsu seika hokokusho. Daininendo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This R and D program is aimed at development of highly functional, heat- and wear-resistant composite materials by (1) in-situ method (dissolution and solidification), (2) compositing, based on casting and (3) MA/MM and HIP, and hot pressing, and also aimed at establishment of the techniques for applying these materials to, e.g., transportation machine members, and power generation and steel-making plant members. The heat- and wear-resistant material is characterized by the diplophase structure with a hard phase dispersed in a heat-resistant alloy matrix, where constituent phase type, composition, content, size and distribution are adequately controlled at the mesoscopic level for specific purposes. Fe-Cr-Nb-Mo-Ni-C-based alloys are prepared by the method (1). The Al{sub 2}O{sub 3}-28%SiO{sub 2} composite prepared by the method (2) shows excellent characteristics. Cast iron for the matrix shows excellent controllability, when its P content is increased to 1.8%. The Fe-50%Cr-4.8%C composite prepared by the method (3) is 12 times more resistant to wear than the conventional material. A mixed powder of 2.3% of high-speed steel and TiC or TiN, when MA- and then HIP-treated, shows at least 3 times more resistant to wear than the cast high-speed steel.(NEDO)

  3. Achievement report for fiscal 1998. Research and development of new technologies for storing farm products utilizing low-temperature energy (2nd fiscal year); 1998 nendo seika hokokusho. Teion energy wo riyoshita nosanbutsu no shinki chozo gijutsu no kenkyu kaihatsu (dai 2 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim of the work was to create new industrial technologies utilizing low-temperature energy satisfying local needs through developing new technologies, including air conditioning technologies high in reliability and excellent in energy efficiency. The objectives of the effort were to elucidate the behavior of moisture in the atmosphere below the freezing point and to develop farm product preserving technologies, to develop highly efficient energy conversion technologies for use in the low-temperature zone, latent heat storing cold heat technologies, and system evaluation. Constructed in connection with the last-said system evaluation were three technologies, which were a below-zero high-humidity air conditioning technology based on the outcome of agricultural verification of farm product storage, energy-efficient low-temperature storage of farm products which was a combination of a low-temperature oriented energy-efficient energy conversion technology and a clathrate hydrate-aided cold heat storing technology, and a technology applicable to business in the low-temperature processing field accessorial to the said technologies. They were compared with the conventional technologies, and then it was found that the most energy-efficient system, as endorsed by a 40-50% reduction it caused in electricity rate, was a combination of a low-temperature storage, frozen food storage, hydrate cold heat storage tank, recovery facility for farm waste incineration-produced waste heat, and a pulse tube freezer. (NEDO)

  4. Fiscal 2000 project of inviting proposals for international joint research - invitation for international proposal (power generation No.15). Achievement report on development of guided boring system for buried power network; 2000 nendo kokusai kyodo kenkyu teian kobo jigyo - kokusai teian kobo (hatsuden No.15). Denryokumo chichuka hikaisaku kanro kensetsu koho no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    What impedes the popularization of the guided boring system is the functional insufficiency of the drilling position measuring method. For the purpose of properly dealing with the situation, efforts are made to develop a new drilling position measuring method which is highly reliable even when there exist previously buried pipes or electromagnetic noise. Activities are conducted in the two sections of (1) the study of an drilling position measuring method not to be easily affected by magnetic noise and (2) the study of a method for detecting previously buried objects. In section (1), based on the technology of a drilling position measuring system (locator) which is currently the most popular among horizontal drilling systems, a signal processing technology capable of reducing the effect of noise and a new position measuring method are contrived, and it is proved by the use of an experimenting system that they work effectively. In section (2), with attention paid to the small horizontal drilling device, an underground radar technology with the radar probing into the ground from the ground surface or from a drilling head is studied as an effective and easy-to-use method for detecting previously buried steel pipes. (NEDO)

  5. Fiscal 1998 industrial science and technology R and D project. Research report on R and D of genome informatics technology (Development of stable oil supply measures using complex biosystem); 1998 nendo genome informatics gijutsu kenkyu kaihtsu seika hokokusho. Fukugo seibutsukei riyo sekiyu antei kyokyu taisaku kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report describes the fiscal 1998 result on development of genome informatics technology. As comparative analysis technique of genes, the combination of electrophoresis and PCR was used. For improvement of the throughput and reproducibility of the technique, module- shuffling primers were used, and the multi(96)-arrayed capillary fragment analyzer was devised. The system detecting SNPs rapidly was also developed successfully. As analysis technology of DNA sequence by use of triple- stranded DNA formation, study was made on construction of long cDNA libraries, selective subtraction of specific sequences from libraries, and the basic technology of homologous cloning. Study was also made on each reaction step of IGCR technique for fast analysis, and specifications of a fluorescence transfer monitor. As modeling technique of genetic sequence information, the simulation model was developed for gene expression regulatory networks during muscle differentiation, and feedback regulation of period genes. Such support systems as transcription factor prediction and gene regulatory network inference were developed from existing data. (NEDO)

  6. Fiscal 1997 report on the results of the international standardization R and D. Standardization of the optical evaluation method of the performance of shape stability of the apparel; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Apareru seihin no keitai antei seino no kogakuteki hyoka hoho no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of proposing the optical evaluation method of appearance of the apparel as an international standard, studies were made of the following: 3D determination/assessment method, development of mannequin holders, development of shape-retentive cubic replicas, washing/drying conditions, etc. As to the shape retention, cubic replicas for collars and cuffs were manufactured and inputted as image data. Besides, as to the evaluation items such as wrinkles, seam-puckering and pleats, the class determining algorithm was made by comparison between the measuring data and the results of the human-sight measurement. These were embodied into mannequin holders and integrated into the optical 3D instrumental system, which was discussed as a 3D determination/assessment system. By the development of the 3D measuring system and image analysis program, a comprehensive evaluation system was developed which can determine/assess the performance of shape stability of the apparel optically as absolute evaluation. This method will be internationally proposed as an optical evaluation method of the appearance of the apparel. 86 figs., 8 tabs.

  7. Fiscal 1999 technical achievement report. Research and development project on the quickly effective international standards creation (Standardization of information security system evaluating methods); 1999 nendo sokkogata kokusai hyojun sosei kenkyu kaihatsu jigyo seika hokokusho. Joho security system no hyoka hoho no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For standardization under information security evaluation criteria, an evaluating technique CEM (Common Methodology for Information Technology Security Evaluation) was constructed as ISI/IEC15408. The method, however, is abstract in content and the evaluation work thereunder requires much time and accompanies economic difficulties. In dealing with the situation, investigations were conducted into security evaluation related techniques and manufacturing/quality control techniques in use at information processing product developing sites, and a CEM technique is materialized. Using the proposed technique, developers themselves can evaluate security in the development process and workloads imposed on evaluating organizations may be reduced because evidential items necessary for 3rd party evaluation may be gathered. Since the developed technique is verified by an official evaluating organization, it is expected to be an effective techniques not contradicting existing operating techniques. It may be also said that this technique is a method whereby developers will collect evidential items necessary for their development efforts. The result will be presented in the form of a proposal for an evaluating techniques standard for ISO/IEC JTC1 SC27. (NEDO)

  8. Fiscal 2000 achievement report on the research and development of medical and welfare apparatus/technology. Totally implantable artificial heart for clinical use; 2000 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Rinsho oyo ni muketa tainai umekomigata jinko shinzo system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    In the development of control technologies for a pulsatile pump, studies proceeded with a view to using a mixed venous blood oxygen saturation sensor, an ultrasonic sensor, and an absolute pressure sensor. Efforts were started to downsize the hydraulic actuator and to enhance its efficiency. In the development of a non-pulsatile artificial heart, the GyroP1710 series of artificial heart systems of Japanese make was developed, which employed a curved inlet known to be highly compatible from the anatomical point of view. In the development of a total system, a pulsatile auxiliary artificial heart was given a chronic animal test which continued approximately three weeks, when it yielded a flow of approximately 4 liters/minute showing that it would be practical as an auxiliary heart. As for the non-pulsatile artificial heart, a cardiopulmonary bypass test was conducted, when the blood circulation behavior was normal and organ functions were sustained. The free hemoglobin level was 9.3mg/dl achieving the target value, and the test animal lived as long as 50 days. (NEDO)

  9. Fiscal 2000 achievement report on the research and development of medical and welfare apparatus/technology. Implantable insulin infusion system utilizing optical blood glucose monitor; 2000 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Kogakuteki kettochi sokutei system wo oyoshita tainai umekomigata insulin chunyu system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    In the study of an optical blood glucose monitoring system, basic data were collected and studied by measuring, for example, the absorption spectra of a glucose solution and rabbit blood in the near infrared domain. A simulation program was prepared based on the Monte Carlo method for the reproduction of light propagation in living organisms. As for the implanted insulin infusion system, requirements to be satisfied, technical problems to solve for their satisfaction, and system specifications were studied. As for the insulin infusion pump, methods for pump driving, manufacturing, and evaluating were studied, and a diaphragm type pump was fabricated. As for percutaneous signal transmission, studies were made about information to be transmitted and received between the intracorporeal and extracorporeal units, method of communication, charging of power to the intracorporeal unit, and so forth. (NEDO)

  10. Fiscal 1997 report on the results of the cooperative research project under consignment from NEDO on technology for simply setting-up of the molding conditions of engineering plastics; 1997 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (Engineering plastic no seikei joken kan`i settei gijutsu ni kansuru kenkyu kyoryoku jigyo seika hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A cooperative research project was carried out between Japan and Thailand with the aim of developing a system which can simply set up molding conditions using as elements the technology on mold design and injection molding in plastic parts production and the experiment/evaluation technology for making sure of the quality of molded products. In fiscal 1997, based on the basic plan worked out in the previous fiscal year, molding equipment, auxiliary equipment, mold, experimental equipment, injection molding CEA system, etc. were installed at Thailand`s BSID (Bureau of Supporting Industries Development). Supported by equipment manufacturers, the technical guidance was given for operation/maintenance/control of all equipment. At the same time, researchers were sent from Japan, and the joint research was started. Japan received three researchers from BSID for training of molding technology, injection molding CEA program use technology, and experimental evaluation technology. The engineering plastics used for study are polyacetal, polyamide and polycarbonate. 17 refs., 68 figs., 14 tabs.

  11. Survey report for fiscal 1998 on research and development and its staff training. Towards cooperation among Japan, Australia and developing nations in Asia; Kenkyu kaihatsu to sono jinzai ikusei 1998 nendo chosa hokokusho. Nippon, Australia oyobi Asia no hatten tojokoku no kyodo wo mezashite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper makes an analysis on the characteristics of R and D concerning Australia, one of the core nations in the cooperation, on the basis of the idea that 'establishment of new comparative superiority through cooperation' can be realized by joint work among Japan, Australia and Asian nations. In Australia, it was found that R and D was often promoted through a new idea obtained by recruiting heterogeneous persons and communicating mutually internally. It was also found that in Australia an affinity exists to such persons of different nature. Accordingly, Australia was presumably quite suitable for the place to bring up the persons of developing nations. On the basis of these analytical results, proposal was made to promote three programs; namely, preparation of a data base for R and D organizations and the staff, commencement of a partnership program, and opening of a needs searching conference. (NEDO)

  12. Fiscal 2000 achievement report on the research and development of medical and welfare apparatus/technology High-speed and 3-dimensional X-ray CT system using cone beam X-ray (Energy use rationalization); 2000 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Kosoku cone beam sanjigen X sen CT (energy shiyo gorika)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    In the study of a 3-dimensional data reconstruction system, the fabrication of an interface to serve between the data transmission section and the image reconstruction unit was complete, and evaluation was started of its performance and capability. In the effort to develop a 3-dimensional image processing system, specifications were deliberated for image reading systems and DICOM (digital imaging and communications in medicine) converters for clinical research, and articles to be ordered were selected. For dealing with a multi-platform system and enabling image-aided dignoses by plural users, a browser plug-in type web-based GUI (graphical user interface) was employed as the user interface and in the image server. The system construction was complete, and performance evaluation was started. In developing the total system, designing and manufacturing were started of the data transmission section, the bed and its rotary mount, and the high-voltage generation unit for the X-ray tube and X-rays. Preparation was started of a system control software program. (NEDO)

  13. Feasibility study of international cooperation in the research/development of a solar energy utilization system by the innovative solar thermochemical process; Kakushinteki solar netsukagaku process ni yoru taiyo energy riyo system no kaihatsu kenkyu ni kakawaru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    At COP3 in 1997, an agreement was made to the innovative technical development/promotion by international cooperation, and the promotion of transfer of environmental technology to developing countries. Under the agreement, a feasibility study of international cooperation was made, and especially a study was conducted of the utilization/development of solar energy by the innovative solar thermochemical process. The main reason for global warming is emissions of a large amount of CO2 caused by the direct combustion of fossil fuels. Therefore, a CO2 recycle system taken up in the study enables a more substantial decline in CO2 emission (kg/kWh) per unit generation than the conventional thermal power system by composing solar methanol or solar dimethyl ether using fossil fuels including coal, water, CO2, etc. as raw materials and using solar energy as heat source, and by using this as fuel (solar fuel). CO2 can be reduced by 13% to 14% by substituting solar methanol or solar dimethyl ether produced from petroleum/methane equivalent-mol mixed raw materials for the equivalent mol coal and natural gas of the thermal power plant (CO2 recovery is not necessary). 34 refs., 47 figs., 34 tabs.

  14. Studies on plant materials as energy resources 2. Jojoba-new raw material for industry. Energy-gen to shiteno baiomas no tansaku to hyoka ni kansuru kenkyu dai 2 ho. Miriyo YURYO shokubutsu hohoba saibai no genjyo to kaihatsu jyo no kadai

    Energy Technology Data Exchange (ETDEWEB)

    Suganuma, Hirotoshi.

    1989-02-01

    The studies have the objective of searching and evaluating biomass as energy resources and in this report, the current situation and the issues concerning development of cultivation of jojoba which has been an unused oily plant growing in arid and semi-arid areas in the southwestern USA. Its summary is as follows: (1) Jojoba is cultivated experimentally over about 20,000ha in the tropical and semitropical arid and semiarid regions at the almost same latitudes of the areas where it grows wild, (2) With regard to the areas qualified for development in the Chaco region of the western Paraguay, the La Rioja Province in the northwestern Argentina and the Eastern Province in the eastern Kenya, ample production can be expected judging from their natural environmental conditions and the growing characteristics of jojoba. (3) Jojoba is a dioecious plant and it takes 4-5 years from seeding to flowering. During this period, its sex difference cannot be identified, but a conclusion was obtained that the sex difference might possibly be identified by the isozyme method at its stage of young seedlings. (4) When cultivation techniques are firmly established and its price goes down to about 2 dollars/kg, jojoba becomes promising as substitute for sperm whale oil. 20 refs., 8 figs., 18 tabs.

  15. Fiscal 2000 project of inviting proposals for international joint research - invitation for international proposal (Energy conservation No.4). Development of passive cooling mechanism fit for high-temperature high-humidity region; 2000 nendo kokusai kyodo kenkyu teian kobo jigyo - kokusai teian kobo (Shoe No.4). Koon tashitsu chiiki tekigogata passive reikyaku kiko no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Efforts are made in cooperation with Vietnam to develop a heat insulating material for buildings, to be used for passive cooling mechanisms symbiotic with the environment and capable of energy conservation. Vegetables are planted on the surface of this building material. Activities are conducted in the three domains of (1) the development of energy conservation-conscious basic materials, (2) selection of vegetables, and (3) the simulation of the effect of the developed materials on temperature. The basic type of the newly developed building material is an asbestos-free vegetable fiber-reinforced cement slate which is covered by such vegetables as members of the Passifloraceae, Vitaceae, and Araliaceae. Conducted in domain (1) are surveys of the actual state of basic material manufacturing in Vietnam and studies of the basic properties of vegetable fiber, properties displayed by vegetable fiber under various chemical environments, selection of vegetable fiber as the basic aggregate, mineral fiber, and the basic material manufacturing conditions. The result of heat load calculation carried out using SMASH for Windows ver.2, which is a program developed for thermal load calculation for houses, shows that the new material lowers the temperature by approximately 3 degrees C. (NEDO)

  16. Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium research field (Research and development of ultrahigh quality transparent conductive film formation - 3rd year); 1999 nendo UHQ tomei dodenmaku keisei ni kansuru kenkyu kaihatsu seika hokokusho (dai 3 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Demands are strong for lower-resistivity transparent conductive films formable at low temperatures (target substrate temperature of 100 degrees C) for the realization of higher-quality electronic equipment required in highly computerized society. The project aims to develop a system for complexation and amalgamation of high-density energy beams (multi-beam thin film formation) and to establish a technology of practical level ultrahigh quality transparent conductive film formation. For this purpose, a load lock system and a laser irradiation system are added to a device developed in the past. A high-quality ITO (indium-tin oxide) thin film is formed at a low temperature by deposition using oxygen cluster irradiation. During film formation using the laser aberration method, ultraviolet rays are applied to the substrate, and a low-resistivity film of 8.9 times 10{sup -5} ohm/cm is obtained on a substrate at 200 degrees C. This process is attributed to crystallization accelerated by ultraviolet rays and to an increase in carrier mobility. In a process of transparent conductive film formation under a complex beam, composed of a laser beam and oxygen cluster ion beam, to be excited for application to mass production, an ITO thin film is formed, with its resistivity extremely low at 10{sup -5} ohm/cm even at 100 degrees C. (NEDO)

  17. Fiscal 1997 report on the results of the international standardization R and D. Measurement of ultra-micro chemical substances and measuring methods of hormone effects; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Chobiryo kagaku busshitsu no keisoku horumon eikyo sayo sokuteiho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Concerning the measurement system of ultra-micro hazardous chemical substances in the global environment, the paper examined the present situation of chemical substances such as dioxins, made an experimental study on the method to analyze dioxins in exhaust gas from an aspect of international consistency, and worked out a JIS draft. As to the standard measuring method of hormone effects of chemical substances, the paper developed the competitive bonding experiment system to measure bonding ability of chemical substances to homo sapiens estrogen receptor (ER). By measuring ER bonding ability of 78 kinds of chemical substances, the measuring method was developed. In the development of the assay system for detection of hormone-like compounds, the assay system with transfer activity via estrogen receptor as an index was established using cultured cells and yeast. Further, the development was made of a measuring method of receptor bonding activity of hormone-like substances. 33 refs., 151 figs., 66 tabs.

  18. Development of medium-sized medium-speed lean burn spark-ignited gas engines. Analyzing local gas composition within the main combustion chamber and optimizing the design factors of a jet hole in the pre-combustion chamber; Chugata chusoku kihakunensho gas engine no kaihatsu kenkyu. Nenshoshitsunai kyokusho gas sosei no bunseki to yonenshoshitsu funko sekkei yoso no saitekika ni kansuru ichikosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Goto, S.; Sakagami, T.; Hashimoto, T. [Niigata Engineering Co. Ltd., Tokyo (Japan)

    1996-10-25

    A high-speed gas sampling method was used to analyze the local gas composition within the main combustion chamber of a lean burn gas engine with a 260 mm bore. The spatial distribution of the gas composition and changes every crank angle were studied. The optimum design of a jet hole in the pre-combustion chamber was then investigated based on these results, with the aim of reducing CO and THC concentration and increasing the thermal efficiency. The engineering findings were evaluated by means of a performance test on a 6 cylinder engine. 4 refs., 10 figs., 1 tab.

  19. Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium research and development in its 1st year (Research for development of high-performance mini-scale manufacturing system for very small precision machine parts); 1999 nendo kogata seimitsu kiki buhin'yo kokino mini seisan system no kaihatsu kenkyu seika hokokusho. 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research and development is conducted of a flexible manufacturing system which uses mini-scale production cells capable of dealing with environmental and energy conservation problems, to be operated for the manufacture of small quantities of multiple kinds of goods. The concept of total system is that work pieces fall within the dimensions 15mm diameter times 50mm in length and that 14 kinds of cells be built out of 36 kinds of units. A control system chart is prepared, in which the units, the cells, and the whole are to be allotted to their respective control units according to their functions. In the development and designing of units to constitute mini-scale production cells and functional elements for them, problems to arise from miniaturization are considered, miniaturized tool rests are designed, built-in motor type main shafts are designed, and it is now expected that cylinder grinding cells will roughly satisfy the target dimensions and weight. In the development and fabrication of mini-scale production cells and units, cylinder grinding stone spindle units, traverse table units, grinding cell control devices, etc., are fabricated. (NEDO)

  20. Fiscal 1998 achievement report on regional consortium research and development project. Venture business fostering regional consortium--Creation of key industries (Research and development of emission-free material separation and recycling process technologies for spent electric/electronic products); 1998 nendo shiyozomi denki denshi kogyo seihin no emissionless sozai bunri saisei junkan system no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The personal computer is taken up as a sample, and studies are conducted about a system for separating and recovering recyclable materials. For the high-speed cutting and crushing of materials and their compaction, a water-jet cutting method is employed, which enables the unification of chip sizes after cutting, the prevention of dust generation, and the realization of clean working environments. For the separation of copper wires from their coats, a high-speed peeling machine is developed, and the copper wires are recovered for reuse. Fluorine plastics and polyester resin that constitute the coats do not show deterioration in their resin properties when put back into use. As for the powder resulting from the crushing of print circuit boards, it produces gas and unburnt carbon when subjected to heat treatment at 600 degrees C in inactive gas. The problem to arise from this recovery method is how to lower the cost. The separation of pelletized polymers and metal constituents can be accomplished by changing the ablation generation limit energy level during excimer laser irradiation, and this allows them to be recycled. (NEDO)

  1. Fiscal 1997 report on the results of the R and D on the invention of high-level combustion technology using the microgravity environment; 1997 nendo seika hokokusho (bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of achieving both the diversification of energy resources and the reduction in environmental pollutants in fuel exhaust gases, the paper conducted elucidation of combustion phenomena using microgravity facilities and research on combustors which make high-level combustion possible. In the experimental study using microgravity experimental facilities, conducted were evaluation experiments on combustion/evaporation of fuel droplets and droplet groups, elucidation/evaluation experiments of combustion characteristics of high-density fuels, evaluation experiments of flammability limit, and elucidation/evaluation experiments of emission mechanisms of NOx, etc. Analysis/evaluation of the data obtained and elucidation of the combustion mechanism were conducted. Further, by applying the results of the microgravity experiment, the high-level combustor experimental facilities were fabricated, and validation tests were started. In the international joint research with US`s NASA, the following were conducted using JAMIC`s facilities and NASA`s 2.2 second drop tower: study of mutual interference of droplet series combustion, study of binary system fuel droplet series combustion, study of combustion characteristics of solid fuels, study of behavior of flames around the lean flammable limit, etc. 151 refs., 253 figs., 7 tabs.

  2. Studies on the utilization of by-products in food manufactures by methods of biotechnology (8). Development of lactic acid beverage using white rice flour; Baio tekunoroji ni yoru shokuhin fukusanbutsu no kodo riyo ni kansuru kenkyu (8). Hakko wo genryo toshita nyusankin inryo no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Sugano, N.; Uehigashi, H.; Moriyama, H.; Hisatake, M. [Kochi Prefectural Industrial Technology Center, Kochi (Japan)

    1999-11-25

    The lactic acid bacteria beverage under alcohol 1% is reported, because lactic acid and yeast were added to saccharification liquid that made and enzymegenationed white rice flour which is a by-product of sake brewing to be raw material, and because the fermentation was done and was produced. The lactic bacteria selected 2 stocks on 7 kinds of strain from breeding and living acidity and sensory of fermented liquor in the white rice flour saccharification liquid. In the drink, a balance of sourness and sweetness is important. The optimum onset sugar concentration is estimated from the sensory test for the drink of which sugar content differs from the acidity. In Lactobacillus lactis subsplactis IAM1198 of which sugar content of 22.5 and living acidity were low in Lactobacillus acidophilus IAM10074 of which the living acidity is high, the fermentation was done in sugar content of 20.0, and it produced the drink with the good flavor. (NEDO)

  3. Report on investigations and studies on possibility of developing an environment friendly washing technique and its effect on industrial activities in fiscal 1994; 1994 nendo kankyo ni yasashii sentaku gijutsu no kaihatsu kanosei to sangyo katsudo ni ataeru eikyo ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Discussions were given on detergents, washing agents and a possibility of a washing technique that impose less loads on the environment. Compacted granular detergent is the mainstream in detergents for clothing. The detergent has a reduced volume, but contains more normal chain alkylbenzen sulfonate (LAS) as a surfactant than the conventional detergents. The current annual consumption of synthetic detergents reaches about one million tons, and soaps about 200,000 tons. Overpopulation and depopulation have become extreme depending on areas, whereas urban areas consume detergents five to ten times the national average. The number of corporations in the soap and detergent industries who take environmental effects of detergents seriously and are trying to develop environment friendly detergents is increasing in recent years. Most of these detergents use natural plants as their main material, using no synthetic surfactants or additives. Bearing the cost for environmental loads and considerations on environment preservation may be adequately incorporated if individuals and corporations make economically reasonable decisions. 7 refs., 32 figs., 18 tabs.

  4. Fiscal 1999 achievement report. Venture seed pickup type international cooperative research project (Development of multi-beam semiconductor laser-aided preparation system for photogravure printing using water-based ink); 1999 nendo venture seeds hakkutsugata kokusai kyodo kenkyu jigyo seika hokokusho - venture seeds No.8. Suisei ink wo mochiita gurabia (oban) insatsuyo multi beam handotai laser seihan system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the prevention of environmental contamination due to oil-based ink used in the photogravure printing process, efforts were exerted to develop a technique of laser-aided photogravure printing using a water-based ink. It was learned that the laser optical system technology of CR Corporation of Canada was practical and high in quality, and a delay occurred in the development of an evaporation type resin for use under this project. Then the initially planned design was abandoned for a type using a new optical system manufactured by CR Corporation. In the development of plate making materials, it was found that resin evaporation was incomplete in a 1-layer structure design. A 2-layer structure design was then employed instead, and the evaporation goal was achieved. Now that the optical system was changed, the resin was also replaced with a thermosensitive type, which enhanced work efficiency. The CR Corporation-manufactured laser optical system was installed on a mount, the processor system was controlled and adjusted, and a printing test was conducted using a water-based ink of German make. It was found that the product of the new system was higher in quality than that printed by the conventional mechanical perforation type printer using an oil-based ink. (NEDO)

  5. Study on the large-scale photovoltaic (PV) power generation in desert of China and its utilization. Development of energy and agriculture in solar farm; Chugoku ni okeru ogata taiyoko hatsuden to sono riyo ni kansuru kenkyu. Solar farm ni yoru energy to nogyo kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Nishioka, S.; Ohashi, Y.; Ito, H. [Tokyu Construction Co. Ltd., Tokyo (Japan); Ojima, S. [Maeda Corp., Tokyo (Japan)

    1997-01-30

    This paper proposes solar farm, a system suitable for China`s present circumstances, and describes its development plan. In this plan, agriculture and stock farming are promoted through irrigation using PV power in the desert zone, middle-east China. In addition, electric power is produced by laying PV power generation modules. The solar farm has 100 blocks of farmland equivalent to 700 ha, which includes 300 farmhouses (population of 1200). It can be a food supply base producing rice and wheat. The power generation capacity is at least 1000 kW, and the night power is supplied by battery installed in each farmhouse. The power generated in the daytime is used not only for agriculture but also for secondary industry such as processing of agricultural and stock farming products. The Chinese government requires 300,000 ha of farmland development every year up to 2030, the peak of population. When a half of this is developed by the solar farm, 200 solar farms are to be developed every year. For 30 years, 6000 solar farms are to be developed. 5 refs., 1 fig., 1 tab.

  6. Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium research on energy (Research and development of biofuel production using highly functional bioreactor - 2nd year); 1999 nendo kokino bio reactor ni yoru bio nenryo seisan ni kansuru kenkyu kaihatsu seika hokokusho (dai 2 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Microbes capable of a high biodiesel fuel (BDF) yield from moisture-containing oils assumedly waste oil are investigated. Lipase attributed to Rhizopus oryzae exhibits a high reaction rate of not lower than 90%. The process functions even when microbes are immobilized by BSPs. BDF does not affect driving performance, and black smoke is reduced. A process basic to industrial production is developed by use of a fixed bed reactor. In the production of ethanol from starch thanks to plural kinds of glucoamylase producing yeast, ethanol is produced at a rate of 7-8% under microaerophilic conditions in both proliferation and fermentation periods, which means a success achieved in growing arming yeast equipped with enhanced functions. A 20-liter class bench plant is installed and immobilization by BSPs is tested, when no problem is detected. In a reaction involving these immobilized microbes, a reaction rate near 16% is achieved. In the production of ethanol by yeast immobilized by BSPs, use of a fuzzy control system is studied, and it is found that prolonged stability is available when glucose concentration is sustained at 10-20g/liter. (NEDO)

  7. Investigation of the creation of functional surfaces and the recent development in related researches. 2. Investigation of the development of new isolation/refining systems in water system; Kokino hyomen no sosei to shintenkai no kenkyu doko chosa. 2. Suikei ni okeru atarashii bunri seisei system no kaihatsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Propositions were made concerning new chromatography and membrane separation techniques wherein a command control material is used, the mobile phase is fixed upon water, and the fixed phase is caused to vary by external commands, and how to develop the said techniques into a project was discussed. New methods were also introduced, capable of separating water systems and, particularly, capable of separating and refining, without damaging their functions, bionic elements such as proteins, genes, and cells, which encouraged discussion on the future of the said project. As for command controlled materials, detailed investigations were conducted into materials responsive to physical stimulation such as light, electric field, magnetic field, or heat and materials responsive to PH and chemical or biochemical substances, and discussion was made on the structures and characters of the said materials. Concerning the manufacture of a command controlled surface, consideration centered particularly about the density and thickness of command controlled molecules to be introduced onto the surface. Furthermore, the current state and problems were discussed regarding chromatographic separation and refining of optical isomers, nucleic acids, physiologically active substances, peptides, cells, etc. 252 refs., 75 figs., 31 tabs.

  8. Fiscal 1997 report on the results of the international standardization R and D. Quantification of the sensory evaluation and international standardization in the paint field; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Toryo bun`ya ni okeru kanno hyoka no teiryoka to kokusai hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Japanese paint users demand products of higher-quality than users in the U.S. and Europe, and therefore, paint makeres in Japan are making strenuous efforts to improve the product quality in terms of homogeneity, appearence and durability of the surface of paint films. However, the evaluation of paint surfaces is conducted by the qualitative sensory evaluation, resulting in obtaining no appropriate evaluation. Accordingly, the following were developed as new evaluation methods which give rational and economical indicators, contribute to shortening of the period for development of new products, and aim at the international standardization: 1) quantitative evaluation of the paint drying process; 2) image analysis of the degraded part of paint films; 3) surface analysis of paint films. In 1), a kinetic friction measuring quantitative evaluation of the surface of paint films was developed. In 2), the development of an exclusive program by the image analysis made the quantitative evaluation with high accuracy/reliability possible. In 3), an evaluation method was developed in which differences among the specimens can be detected by the chemiluminescent measurement in an extremely early stage of exposure when the gloss change just begins. As to the chalking, a new evaluation was developed in which the degree of chalking can quantitatively be evaluated by attaching a special adhesion tape to the degraded part of paint films and by the optical measurement of the degree of transparency. 101 refs., 341 figs., 118 tabs.

  9. Fiscal 1998 achievement report on regional consortium research and development project. Venture business fostering regional consortium in its 2nd year--Creation of key industries (Development of manufacturing system for multiple applications of biological resources); 1998 nendo yuyo seibutsu shigen no tamokuteki riyo no tame no kako seizo system no kenkyu kaihatsu seika hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research and development is conducted to collect intermediate products from Okinawan herbs for the production of antioxidant products usable for various purposes. Substance-producing plants are screened and the substances they offer are assessed for antioxidant activity, extracted, processed, prepared for market, and checked for safety. At the Okinawa Industrial Technology Center, a DPPH (1,1-diphenyl-2-picrylhydrazyl)/microplate method has been established, which promptly measures the antioxidant activity of the substances. Using this technology, the divisions concerned of industrial, academic, and governmental organizations cooperate with each other over the optimization of herb cultivation technology, development of a herbal ingredient analyzing technology, efficacy of herbs, development of a safety assessment system, development of a technology for the effective extraction, processing, and preparation of herbal ingredients, and the development of a technology of assessing antioxidant intermediate products for their efficacy. As the result, a technology is established of producing intermediate antioxidant products from Guava, Ryukyuyomogi, and Ukonisomatsu. They are unique Okinawan products, and sell at 40,000-50,000 yen. Since the prices are equal to or lower than the prices of other antioxidant intermediate products, probabilities are very high that they will get into markets in Japan proper. (NEDO)

  10. Fiscal 2000 achievement report on the research and development of medical and welfare apparatus/technology. Unified system of diagnosis and treatment for heart diseases; 2000 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shinshsikkan shindan chiryo togo shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    The project is a fiscal 1999-2003 five-year endeavor. In the development of surgical operation support technology using a maneuverable manipulator system, studies were conducted about the materials to constitute the manipulator mechanism to perform under MRI (magnetic resonance imaging) environments, and the findings were utilized for designing and fabrication. In the study of shape change compensation technology, experiments were conducted involving the material, shape, and dimensions of the stabilizer for the preparation of a basic design and method of stabilization. In relation to MRI compatible high-speed 3-dimensional ultrasound measurement technology, plural scanner probes were fabricated, with the packing material replaced by plural kinds of candidate materials. In developing image processing technology, hardware items were developed for compensating for endoscope image position and color. Basic designs of surgical plans and intraoperative information displays were prepared, and models were tentatively built for supporting intraoperative delicate operations. (NEDO)

  11. Research on fabrication technology for thin film solar cells for practical use. Research on low-cost fabrication technology for large-area modules (Over-layered TCO on tempered glass for solar cell); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Daimenseki module no tei cost seizo gijutsu (kyoka class fukugo tomei doden kiban seizo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the fabrication technology of over-layered TCO on tempered glass in fiscal 1994. (1) On the fabrication technology of heat-resistant over-layered TCO, thermal deformation of TCO substrates was studied by both experiment and numerical computation. The thermal deformation increased with carrier concentration. As the observation result on change in lattice strain of heated TCO films by high-temperature X-ray diffraction, lattice strain was largely affected by thermal expansion. (2) On development of the low-temperature heat treatment method of TCO films, a technological prospect was obtained for fabrication of low-resistance TCO films by heat treatment without strength deterioration of tempered TCO substrates. (3) On development of cost reduction technology, the large-area CVD equipment was devised on the basis of the inline tempering method which tempers substrate glass by air cooling after formation of SnO2 film as fabrication method of tempered TCO. The TCO substrate tempered by air cooling could endure the drop test of 227g and 1.5m. 5 figs., 1 tab.

  12. Research on fabrication technology for thin film solar cells for practical use. Technological development for qualitative improvement (CuInSe2 based PV cell); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Kohinshitsuka gijutsu (CuInSe2 taiyo denchi seizo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the fabrication technology of CuInSe2 based PV cell in fiscal 1994. (1) On formation of high-quality CIGS thin films by bilayer method, Mo film was deposited on a glass substrate by sputtering, and CIGS film with different Ga/In ratios was next formed on the substrate by quaternary simultaneous deposition at different In and Ga deposition speeds. In addition, CdS film was deposited on the CIGS film, and ZnO and ITO films were finally deposited on it by sputtering to complete solar cell. This solar cell offered the maximum conversion efficiency among cells using CIGS film. (2) On formation of high-quality CIGS thin films by three-stage method, a certain correlation was found between substrate temperature and CIGS film composition by monitoring substrate temperature in film forming process. This phenomenon allowed rigorous control of CIS film compositions important for CIS thin film solar cells. (3) On low-cost process technology for thin film formation, Cu(In,Ga)S2 solid solution film was fabricated by expanded selenic process. 3 figs.

  13. Research on fabrication technology for thin film solar cells for practical use. Research on low-cost fabrication technology for large-area modules (CdS/CdTe solar cell modules); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Daimenseki module no tei cost seizo gijutsu (CdTe taiyo denchi module seizo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the fabrication technology of CdS/CdTe solar cell modules in fiscal 1994. (1) On the fabrication technology for high-efficiency large-area solar cells, high-quality CdTe active layer was studied. S content taken in the active layer at sintering of CdTe decreased with an increase in formed CdTe, resulting in improvement of Voc of cells. (2) On the window layer with wide band gap, the solar cell superior in collection efficiency and photoelectric characteristics could be obtained using the newly developed mixed crystal film of Cd(1-x)Zn(x)S. (3) On the forming technology of large-area coating/sintering films, improvement of CdS film quality was studied by pressurized processing of printed CdS films. As a result, improvement of film density and light transmissivity was confirmed. (4) On the leveling process technology of CdTe films, smooth surface films were obtained by experiment using an equipment simultaneously exciting samples in all directions as one of uniform coating methods of films. 7 figs.

  14. Research on fabrication technology for thin film solar cells for practical use. Technological development for qualitative improvement (development of fabrication technology of thin film polycrystalline Si solar cell); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Kohinshitsuka gijutsu (usumaku takessho silicon kei taiyo denchi seizo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the fabrication technology of thin film polycrystalline Si solar cells in fiscal 1994. (1) On the fabrication technology of high-quality Si thin films, the new equipment was studied which allows uniform stable melting recrystallization over a large area. The new equipment adopted a heating method based on RTP system, and is now under adjustment. (2) On the fabrication technology of light/carrier confinement structure, degradation of hydrogen-treated thin film Si solar cells by light irradiation was examined. As a result, since any characteristic degradation was not found even by long time light irradiation, the high quality of the cells was confirmed regardless of hydrogen-treatment. Fabrication of stable reproducible fine texture structure became possible by using fabrication technology of light confinement structure by texture treatment of cell surfaces. (3) On low-cost process technology, design by VEST process, estimation of cell characteristics by simulation, and characteristics of prototype cells were reported. 33 figs., 1 tab.

  15. Research on fabrication technology for thin film solar cells for practical use. Research on low-cost fabrication technology for large-area modules (production technology for amorphous silicon solar cell modules); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Daimenseki module no tei cost seizo gijutsu (amorphous taiyo denchi module seizo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the fabrication technology of amorphous Si solar cell modules in fiscal 1994. (1) On process technology for prototype film substrate solar cells, an advanced preprocessing equipment for film substrates, stepping roll type film forming technology, and prototype submodules were studied. A conversion efficiency of 7.2% was achieved by use of the submodule formed in an effective region of 40 {times} 40cm{sup 2}. (2) On efficiency improvement technology for film substrate solar cells, p/i and n/i interfaces, forming condition for Ag film electrodes, film thickness of transparent electrode ITO, and optimum transmissivity were studied. (3) On technology for advanced solar cells, high-quality a-SiGe: H film, ion control in plasma CVD, and a-Si film formation by plasma CVD using SiH2Cl2 were studied as production technology of narrow gap materials. (4) On advanced two-layer tandem solar cells, the defect density in optical degradation of a-Si cells by reverse bias dark current was evaluated, and outdoor exposure data were analyzed. 4 figs., 1 tab.

  16. Development of technology for thin substrate polycrystalline solar cells for practical use. Development of elementary technologies for low-cost polycrystalline cell modules; Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Takessho cell module tei cost ka yoso gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on development of elementary technologies for low-cost polycrystalline cell modules in fiscal 1994. (1) On development of elementary technologies for mass production, fast surface machining, fast electrode forming and fast forming of junctions and antireflection films were studied. Surface machining by rotating grindstone was studied as fast cutting of fine grooves on Si substrates, resulting in possible fast machining superior in shape accuracy. Electrode properties equivalent or superior to previous ones were obtained by fast electrode forming using a fast printing/sintering equipment even at transfer speed 7.5 times as high as that of conventional methods. Simultaneous fast forming of junctions and antireflection films were achieved by heat treatment after deposition on Si substrate surfaces while heat-decomposing Ti and P compound gas. (2) On development of module structure, an optimum cell group angle, low reflection rate at glass surface, and fast wiring were studied. 5 figs., 2 tabs.

  17. Research on fabrication technology for thin film solar cells for practical use. Technological development for qualitative improvement (improvement of conversion efficiency of amorphous silicon solar cells after degradation); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Kohinshitsuka gijutsu (amorphous taiyo denchi no shoki rekkago koritsu kojo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on technological development for qualitative improvement of a-Si solar cells after initial degradation in fiscal 1994. On the fabrication technology of light-stable a-Si films, the film formation method possible to control combined hydrogen by repetitive formation/treatment was developed. The obtained high-quality light-stable a-Si film was featured by low defect density in a wide optical band gap range, and defect density of nearly 3 {times} 10{sup 16}/cm{sup -3} after light irradiation. The light degradation rate of the cell where the a-Si film was applied to i layer was relatively stable by 10% or less. The a-Si/a-Si double-layer tandem cell fabricated by this technology produced a high conversion efficiency of 10.5%. By applying {mu}c-Si material to photoactive layer as narrow band gap material, the cell with optical sensitivity even in long wavelength ranges more than 1000nm was obtained. The a-Si/{mu}c-Si double-layer tandem cell produced an initial efficiency of 8.0% and an efficiency after degradation of 7.5%. 12 figs., 3 tabs.

  18. Mesto vstretshi nado izmenit / Jekaterina Petra

    Index Scriptorium Estoniae

    Petra, Jekaterina

    2005-01-01

    Narvas ähvardab 9. mai tähistamine lõppeda skandaaliga - nii Reformierakond kui veteranide ühendus valisid 9. mai tähistamiseks sama mälestussamba, ainult ühel juhul tähistatakse Euroopa päeva, teisel Teise maailmasõja lõpu aastapäeva

  19. Troihh nado ubrat, reshil komissar / Boris Tuch

    Index Scriptorium Estoniae

    Tuch, Boris, 1946-

    2004-01-01

    4. märtsil esilinastus mängufilm "Täna öösel me ei maga" : stsenaristid Kristian Taska, Jaan Tätte : režissöör Ilmar Taska : operaator Istvan Borbas : produtsent Kristian Taska : peaosades Carmen Kass, Peter Franzen; Maria Avdjushko, Priit Võigemast : Taska Productions

  20. Troihh nado ubrat, reshil komissar / Boris Tuch

    Index Scriptorium Estoniae

    Tuch, Boris, 1946-

    2004-01-01

    4. märtsil esilinastus mängufilm "Täna öösel me ei maga" : stsenaristid Kristian Taska, Jaan Tätte : režissöör Ilmar Taska : operaator Istvan Borbas : produtsent Kristian Taska : peaosades Carmen Kass, Peter Franzen; Maria Avdjushko, Priit Võigemast : Taska Productions

  1. Comportamento de variáveis fisiológicas em atletas de nado sincronizado durante uma sessão de treinamento na fase de preparação para as Olimpíadas de Atenas 2004 Comportamiento de variábles fisiológicas en atletas de nado sincronizado durante una sesion de entrenamiento en la fase de preparación para las Olimpíadas de Atenas 2004 Behavior of physiological variables in synchronized swimming athletes during a training session preparing for the Athens 2004 Olympic Games

    Directory of Open Access Journals (Sweden)

    Marina Guimarães Antunes Pazikas

    2005-12-01

    Full Text Available O objetivo do presente estudo foi avaliar o comportamento de variáveis fisiológicas durante uma sessão de treino de nado sincronizado realizada na fase de preparação para as Olimpíadas de Atenas 2004. MATERIAIS E MÉTODOS: A amostra utilizada foi constituída pelo dueto (24 ± 0 anos representante do Brasil em Atenas 2004. A coleta de dados foi realizada durante uma sessão de treinamento com duração de 198 minutos. O treino se iniciou com a parte física, seguida da parte técnica. Para a determinação da glicemia e da concentração de beta-hidroxibutirato foi utilizado o monitor Optium® com suas respectivas tiras. As concentrações de cortisol e das enzimas lactato desidrogenase (LDH e creatina quinase (CK foram determinadas por radioimunoensaio (DPC© e kits comerciais (CELM®, respectivamente. O acompanhamento da freqüência cardíaca (FC foi realizado com o freqüêncimetro Advantage Polar®. RESULTADOS: Foi observada redução (~2% do peso corporal. A glicemia também apresentou queda (~30% em comparação ao valor obtido no início do treino. Em contrapartida, foi observada elevação na concentração de cortisol (salivar 22% e plasmática 29% e de beta-hidroxibutirato (~340%. Não foi observada alteração significativa na concentração plasmática de CK e de LDH. O acompanhamento da FC demonstrou que dos 198 minutos que constituíram a sessão de treino, 36,5 ± 0,7 minutos foram realizados em intensidade leve; 103,5 ± 0,7 minutos em intensidade moderada, 54,0 ± 2,1 minutos em intensidade alta e 4,0 ± 0,0 minutos em intensidade muito alta. CONCLUSÕES: A perda de peso indica que a reposição hídrica não foi adequada. A redução na glicemia e o aumento na concentração de corpos cetônicos e de cortisol reforçam a importância da suplementação de carboidrato durante o treino de longa duração. O comportamento da FC demonstra que a sessão de treinamento foi realizada em uma intensidade moderada, porém com

  2. Proposta de teste incremental baseado na percepção subjetiva de esforço para determinação de limiares metabólicos e parâmetros mecânicos do nado livre Propuesta de un test adicional basado en la percepción subjetiva del esfuerzo para determinar los límites metabólicos y los parámetros mecánicos del nado libre Incremental test proposal based on the rating of perceived exertion to determine metabolic thresholds and mechanical parameters of free style

    Directory of Open Access Journals (Sweden)

    Manoel Carlos Spiguel Lima

    2006-10-01

    Full Text Available A percepção subjetiva de esforço (PSE é determinada de forma não invasiva e utilizada juntamente com a resposta lactacidêmica como indicadores de intensidade durante teste incremental. Em campo, especialmente na natação, há dificuldades nas coletas sanguíneas; por isso, utilizam-se protocolos alternativos para estimar o limiar anaeróbio. Assim, os objetivos do estudo foram: prescrever um teste incremental baseado na PSE (Borg 6-20 visando estimar os limiares metabólicos determinados por métodos lactacidêmicos [ajuste bi-segmentado (V LL, concentração fixa-3,5mM (V3,5mM e distância máxima (V Dmáx]; relacionar a PSE atribuída em cada estágio com a freqüência cardíaca (FC e com parâmetros mecânicos de nado [freqüência (FB e amplitude de braçada (AB], analisar a utilização da escala 6-20 na regularidade do incremento das velocidades no teste e correlacionar os limiares metabólicos com a velocidade crítica (VC. Para isso, 12 nadadores (16,4 ± 1,3 anos realizaram dois esforços máximos (200 e 400m; os dados foram utilizados para determinar a VC, velocidade de 400m (V400m e a freqüência crítica de braçada (FCb; e um teste incremental com intensidade inicial baseada na PSE, respectivamente, 9, 11, 13, 15 e 17; sendo monitorados em todos os estágios a FC, lactacidêmia e os tempos de quatro ciclos de braçadas e das distâncias de 20m (parte central da piscina e 50m. Posteriormente, foram calculadas as velocidades dos estágios, FB, AB, V LL, V3,5mM e V Dmáx. Utilizaram-se ANOVA e correlação de Pearson para análise dos resultados. Não foram encontradas diferenças entre VC, V Dmáx e V LL, porém a V3,5mM foi inferior às demais velocidades (P La Percepción Subjetiva del Esfuerzo (PSE es determinada de forma no invasiva y utilizada juntamente con la respuesta lactacidémica como indicadores de intensidad durante un test de incremento. En campo, especialmente en la natación, hay dificultades en las colectas

  3. Fiscal 1996 project on the modeling for effective energy consumption in developing countries under a consignment from NEDO. Recent on the results of the demonstrative study on scrap preheater of electric furnace in the iron making process (for public); 1996 nendo hatten tojokoku energy shohi koritsuka model jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Seitetsu katei ni okeru denkiro no genryo yonetsu sochi ni kakawaru jissho kenkyu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Indonesia is the biggest iron steel producing country in the ASEAN countries. Most of the production is produced by the electric furnace method in which iron steel scrap is used as a material. However, an energy saving measure in this method, the electric furnace scrap preheater using flue gas, has not yet been spread on a full scale. This R and D is aimed at developing jointly with Indonesia an electric furnace scrap preheater for medium/small size electric furnaces which are adoptable to the present iron making situation in Indonesia and installing it to the electric furnace of the iron making plant in Indonesia for a demonstrative study on energy saving, etc. Spread/expansion of the electric furnace scrap preheater which is an excellent energy saving system targeted expansion of energy saving technology not only of Indonesia, but of ASEAN countries and Japan. In this fiscal year, remodeling of part of the system was made by change of flue gas flow for increasing the energy saving effect, and at the same time, a research study was made of a scrap reheater effective as a total system. Moreover, the paper investigated technical data/information in Japan and overseas. 3 figs., 9 tabs.

  4. FY 1998 annual report on the development of laser-aided, noncontacting, realtime, in-process dressing method using a grinding stone with ultrafine abrasive grains, and study on techniques for applying the method to grinding stone of superthin blades; 1998 nendo laser wo mochiita choteiryu toishi no hisesshoku real time inprocess dressing ho no kaihatsu oyobi gokuusuha toishi eno tekiyo gijutsu ni kansuru kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A new noncontacting dressing method using a laser as a tool has been studied and developed, in order to develop environment-compatible, energy-saving type machining machines. In this study, a cup-shaped grinding stone is developed for grinding performance testing by micron-order diamond abrasive powder, used for producing a grinding stone of superthin blades, is mixed with a cast iron binder, molded and sintered. In the grinding performance test, zirconia as a work is ground at a constant pressure to the grinding stone working surface before and after the laser-aided dressing, to analyze grinding/removal efficiency and grinding resistance. The grinding stone working surface conditions are observed by a scanning electron microscope after the laser-aided dressing, to correlate the surface conditions with the grinding data. It is found that the laser-aided dressing method needs no lubricant, is clean, cutting grinding time when incorporated in the machining process, suitable for grinding stone of low stiffness and ultrathin blades by use of ultrafine abrasive grains, suffering no exfoliation of the diamond grains, and hence economical. (NEDO)

  5. Public subscription project for international joint research proposals in fiscal 2000 - public subscription of international proposal (Substitution No.2). Report on achievements in developing technologies to produce oil-alternative energies from fibrous material based biomass and industrial wastes; 2000 nendo kokusai kyodo kenkyu teian kobo jigyo - kokusai teian kobo (daitai No.2). Sen'ishitsukei biomass oyobi sangyo haikibutsu kara no sekiyu daitai energy seisan gijutsu no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Development has been advanced on technologies to manufacture methanol efficiently by combining a technology to convert selectively fibrous material based biomass into sugar under high concentration sulfuric acid condition with the immobilized enzyme flash fermentation process, both being developed in the United States. Activities have been taken in the following three fields: 1) establishment of an optimal biomass treatment condition by using concentrated sulfuric acid, 2) chromatographic separation of sugar and sulfuric acid, and 3) discussions on conditions to apply the immobilized enzyme flash fermentation process. In Item 1), discussions were given, using rice straw and waste woods as the object, on effects of biomass particle size, sulfuric acid to biomass feeding ratio, sulfuric acid concentration, reaction temperature and time on the cellulose to hemicellulose reaction ratio and the sugar conversion factor, whereas it was revealed that the governing factors are the biomass/sulfuric acid contact area and the reaction temperature. In Item 2), a chromatographic device filled with anion ion exchange resin was used to set the sugar recovery rate of 100% and the sulfuric acid recovery rate of 93%. (NEDO)

  6. Fiscal 1993 international research cooperation project. Feasibility study of finding out the seeds of international joint research (technology for environmental preservation using biotechnology, technology for effective use of unused hydrocarbon resource, technology for development of environmental harmony type catalyst); 1995 nendo kokusai kyoryoku jigyo. Kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa (biotechnology ni yoru kankyo taisaku gijutsu, miriyo tanka suiso shigen no yuko riyo gijutsu, kankyo chowagata shokubai kaihatsu gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This project is aimed at internationally cooperating in the R and D of industrial technology and improving industrial technology of Japan. For it, the following three technologies were investigated: 1) environmental preservation technology using biotechnology, 2) technology for effective use of unused hydrocarbon resource, 3) technology for development of environmental harmony type catalyst. In 1), a survey was conducted of applicability of biological surfactant to prevention measures of pollution by heavy distillate. It showed that part of the biological surfactants is reaching a stage of its being industrially produced by gene recombination bacteria, but as a whole, biosynthetic genes have hardly been elucidated. In 2), a survey of high-grade treatment technology of petroleum coke was made. It pointed out that it is necessary to develop a technology which makes the most of features of petroleum coke and allows defects. In 3), scientists and engineers of Japan and Europe searched for themes on which they can jointly study in the fields of NOx removal catalyst, up-grading of fuel, and development of catalyst combustion of fuel. 287 refs., 136 figs., 128 tabs.

  7. El ritmo de nado, determinante de buenos resultados

    OpenAIRE

    Navarro Valdivielso, Fernando

    2016-01-01

    Siempre me llamó la atención en mi época de nadador que mis entrenadores no me sugiriesen una forma de nadar mi prueba hasta después de haberla nadado. Entonces era cuando se me reprochaban los fallos y se me aleccionaba para cuando nadase la próxima prueba corrigiese mis errores..... Cuando volvía a nadar tropezaba de nuevo en la misma piedra... y vuelta a lo mismo. La posibilidad de terminar la carrera de Profesor de Educación Física sin haber intentado solucionar o al menos estudiar ...

  8. Extremal limits and Ba\\~nados-Silk-West effect

    CERN Document Server

    Pradhan, Parthapratim

    2016-01-01

    A fascinating property of extremal Kerr black hole (BH) is that it could be act as a particle accelerator with infinite high center-of-mass (CM) energy \\cite{bsw}. In this note, we would like to discuss about such fascinating result and to point out that this infinite energy at the event horizon comes solely due \\emph{to the singular nature of the extremal limit}. We also show that a non-extremal Kerr BH can \\emph{not} transform into extremal Kerr BH by the Ba\\~{n}ados-Silk-West mechanism. Moreover, we discuss about three possible geometries (near extremal, purely extremal and near horizon of extremal Kerr) of this mechanism. We further prove that near extremal geometry and near horizon geometry, precisely extremal geometry of extremal Kerr BHs are qualitatively different. Near extremal geometry and near horizon geometry gives the CM energy is finite, whereas precisely extremal geometry gives the diverging energy. Thus, we can argue that extremal Kerr BH and non-extremal Kerr BH are quite distinct objects. Fi...

  9. Increased dialogue between NADOs and academics – challenges and possibilities

    DEFF Research Database (Denmark)

    Gleaves, John; Christiansen, Ask Vest

    2015-01-01

    , and when we do so, we do not (at first) have to look at whether our discoveries are useful for society. It is important to stress that freedom in topics and approaches characterize researchers in the free world. At the same time academics are paid by society, and should pay interest to the larger problems......More than just repositories of knowledge, academics have an obligation to also forge new paths of discovery. As the boundary between what we know and what we still do not know expands, academics are not required to ask “what applied value does this discovery have.” Galileo’s curiosity in the time...

  10. Increased dialogue between NADOs and academics – challenges and possibilities

    DEFF Research Database (Denmark)

    Gleaves, John; Christiansen, Ask Vest

    2015-01-01

    More than just repositories of knowledge, academics have an obligation to also forge new paths of discovery. As the boundary between what we know and what we still do not know expands, academics are not required to ask “what applied value does this discovery have.” Galileo’s curiosity in the time...

  11. Vallo Reimaa : "Statussu regionalnogo tsentra nado sootvetstvovat i za nego nado borotsja" / Vallo Reimaa ; interv. Aleksei Starkov

    Index Scriptorium Estoniae

    Reimaa, Vallo

    2007-01-01

    Regionaalminister vastab küsimustele, mis puudutavad Jõhvi gümnaasiumi juurdeehituse rajamist ja riigilt selleks toetuse taotlemist, linnade konkurentsi regionaalkeskuse staatuse saamiseks, Ida-Viru maavanema kandidaate. Minister on seisukohal, et tuleb toetada kõike, mis tugevdab Jõhvi kui regionaalkeskuse staatust, ja regionaalne gümnaasium on just selline objekt

  12. Vallo Reimaa : "Statussu regionalnogo tsentra nado sootvetstvovat i za nego nado borotsja" / Vallo Reimaa ; interv. Aleksei Starkov

    Index Scriptorium Estoniae

    Reimaa, Vallo

    2007-01-01

    Regionaalminister vastab küsimustele, mis puudutavad Jõhvi gümnaasiumi juurdeehituse rajamist ja riigilt selleks toetuse taotlemist, linnade konkurentsi regionaalkeskuse staatuse saamiseks, Ida-Viru maavanema kandidaate. Minister on seisukohal, et tuleb toetada kõike, mis tugevdab Jõhvi kui regionaalkeskuse staatust, ja regionaalne gümnaasium on just selline objekt

  13. Active Fault Research (1996); Katsudanso kenkyu (1996)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-25

    This is a general collection of papers dealing with the research of active faults. In Japan, since very heavy damage was produced by the Hyogoken-Nambu earthquake of January, 1955, discussion of active faults has promptly grown very active. In relation to the said earthquake, detailed maps of earthquake faults that emerged in the same, trench investigations of the Awajishima surface fault rupture related to the same, and the circumstances of the southern and northern ends of the Nojima earthquake fault are reported. Discussion is made about the re-examination of precaution faults and the possibility of the presence of C-class active faults, dealing with the entirety of Japan. Itemized discussion covers the fossil liquefaction observed on the campus of Hokkaido University, fault outcrop at the geological boundary west of Hanamaki and at the western edge of the Kitakami lowland, morphology at the Median Tectonic Line active fault system Iyo fault, fault outcrop discovered at the Iwakuni active fault system Otake fault, and the Kokura Higashi fault and the topography surrounding it (northern part of Kyushu) are introduced. Furthermore, there are reports on the F1 fault and neotectonics in the Tan-Lu fracture zone in the Linyi area, Shandong Province, eastern part of China.

  14. Fjodor Berman : "Nado umet terjat dengi" / Fjodor Berman ; interv. Liana Turpakova

    Index Scriptorium Estoniae

    Berman, Fjodor, 1951-

    2006-01-01

    BLRT Grupp ühendab 61 firmat kuues riigis, aktsionärid on aastate jooksul kogu teenitud raha suunanud kontserni arengusse. BLRT Grupi arengust, probleemidest kvalifitseeritud tööjõuga, majandus- ja kommunikatsiooniministeeriumi suhtumisest. Juhatuse esimehe Fjodor Bermani karjäärist Eestis, puhkusest ja vaba aja veetmisest, perekonnast

  15. "Estoniju v JeS zashtshishtshat ne nado!" / Signe Ratso ; interv. Eteri Kekelidze

    Index Scriptorium Estoniae

    Ratso, Signe, 1960-

    2004-01-01

    Majandus- ja kommunikatsiooniministeeriumi asekantsleri Signe Ratso sõnul ei too Eesti liitumine Euroopa Liiduga mingeid ootamatusi, Eesti ja EL muutuvad üheks majandusruumiks koos sellest tulenevate tagajärgedega. Tabel: Import kolmandatest riikidest 2003. a. 11 kuu jooksul

  16. Fjodor Berman : "Nado umet terjat dengi" / Fjodor Berman ; interv. Liana Turpakova

    Index Scriptorium Estoniae

    Berman, Fjodor, 1951-

    2006-01-01

    BLRT Grupp ühendab 61 firmat kuues riigis, aktsionärid on aastate jooksul kogu teenitud raha suunanud kontserni arengusse. BLRT Grupi arengust, probleemidest kvalifitseeritud tööjõuga, majandus- ja kommunikatsiooniministeeriumi suhtumisest. Juhatuse esimehe Fjodor Bermani karjäärist Eestis, puhkusest ja vaba aja veetmisest, perekonnast

  17. Oil exploration. Oil reservoir engineering; Sekiyu no kaihatsu. Choryuso kogaku

    Energy Technology Data Exchange (ETDEWEB)

    Takeda, H. [Teikoku Oil Co. Ltd., Tokyo (Japan)

    1998-09-01

    This study is to estimate the amount of oil/gas economically producible and to discuss the increase of the amount. The reservoir rock is stuffed with rock particles, and there are impermeable and dense rocks called cap rock on the side wall and top board. Since the size of void of the reservoir is very small, the volume which oil can actually occupy largely decreases because of the existence of surface tension and water film (20-40% of the volume is occupied by water). The rate of the fluid occupying in reservoir space is called the fluid saturation rate. The primitive reserve is a static volume, but the minable reserve, which is related to economical efficiency, is a dynamic volume which changes according to conditions such as the technical progress. To predict a minable reserve is to predict a production amount under a developmental plan, estimate an income, and find out the time of disposal of the oil/gas field (economical limit). To ask for a certain level of accuracy, it is indispensable to simulate the reservoir. To add an element of time to the material balance, the equation of flow including the permeability rate is solved. The paper also described measures to increase minable reserves

  18. Development of new catalytic materials; Shinshokubai zairyo no kaihatsu doko

    Energy Technology Data Exchange (ETDEWEB)

    Tatsumi, Takashi [Yokohama National Univ., Kanagawa (Japan)

    1999-04-05

    The catalyst fulfils large role for the solution of environmental problem, resources problem, and energy problem. It is popular to carry out the research, which intends to realize the new process of which the environmental loading is low by the new catalyst. And, the development of catalyst material, which demonstrates the function under the ultimate condition like the environmental catalyst, is required. The interest has leaned in also using the solid catalyst for the synthesis of fine chemical such as intermediate and perfume of the medical supply synthesis. In this paper, the following are described as a new catalyst material: Zeolite and development trend of meso porous molecular sieve explosively studied recently. The application to the reaction is also simply touched. (NEDO)

  19. Development of new construction technology; Seko shin gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ikemura, M.

    1994-07-10

    Recent trend in construction technology employed in the construction industry is presented. Continuous underground wall method, shield pipe jacking method, and concrete bridge erection method have been developed. In the field of pneumatic caisson method, remote control for stereoscopic vision with a 3D camera and remotely operated recovery of drilling machine are being employed. In the case of the RCD method, remotely operated green cut device has been introduced for labor saving. For the shield tunneling method, technological development for larger cross section and modified cross section has been carried on actively as well as development for labor-saving and unmanned controlling. Development of direction control in small diameter pipe jacking method is in progress. NATM method is a typical construction method for mountain tunnels. Technology to learn the area and the amount of soil has been developed wherein photographic surveying and GPS are used for rapid work progress measurement. Development of rationalization technology for construction, automations of works, and rationalization technology for construction plan control are outlined. 23 refs., 4 tabs.

  20. Basic tests of a rotation seismograph; Kaiten jishinkei no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Matsubayashi, H.; Kawamura, S.; Watanabe, F.; Hirai, Y.; Kasahara, K. [Nippon Geophysical Prospecting Co. Ltd., Tokyo (Japan)

    1996-05-01

    For the purpose of developing a rotational seismograph capable of measuring the rotational component of seismic waves, vibratory gyroscopes were installed in the ground for the measurement of vibration of the ground, and the measurements were compared with the values obtained from tests using conventional velocity type seismographs. In the experiment, the plank was hammered on the east side and west side. The seismographs were arranged in two ways: one wherein they were installed at 7 spots at intervals of 1m toward the south beginning at a position 3m south of the vibration source with their rotation axes oriented vertical, with velocity type seismographs provided at the same spots; and the other wherein three rotational seismographs were installed 3m south of the vibration source with their rotation axes respectively oriented vertical, in the direction of N-S, and in the direction of E-W, with a velocity type seismograph provided at the same spot. It was found as the result that the rotational seismograph has a flat band on the lower frequency side and that it may be applied to elastic wave observation across a wide band. Accordingly, it is expected that it will be applied to exploration that uses the SH wave, to structural assessment that uses the Love wave, and to collecting knowledge about the features of natural earthquakes. 2 refs., 8 figs.

  1. Study on cobalt oxide; Sanka kobaruto ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-28

    This is No.91 report of National Institute for Research in Inorganic Materials, concerning cobalt oxide. For the growth of single crystal by the Czochralski method, shape of interface and contamination of impurities are affected by the convection of molten liquid in the atmosphere. Various oxides besides CoO were investigated. Solid solutions of Cr2O3 and Al2O3 into CoO were also studied. Non-linear optic and dielectric properties of single crystals, such as Ba2NaNb5O15 and LiNbO3, were examined. It was considered that the positive electron having positive electric charge can be used for the study on the negative electric charge defect in materials. However, the positive electron itself is rare, which results in the too low efficiency of measurement. Efficiency improvement of 50 times was achieved by introducing a high performance 2D position detector, which was still low efficiency of one-hundredth compared with photoelectron spectroscopy. It was found that the aggregation structure of positive ion defects in CoO is a misunderstanding of phenomenon caused by the electronic state in bulk crystals. As a result of the study on the optical properties of f-electron transition metals, transparent ceramics with addition of various rare earth ions were described. 162 refs., 106 figs., 14 tabs.

  2. Biosensor. Recent research progress; Baiosensa. Saikin no kenkyu doko

    Energy Technology Data Exchange (ETDEWEB)

    Matsue, T. [Tohoku Univ., Sendai (Japan). Faculty of Engineering; Yamada, H. [National Defence Academy, Yokosuka (Japan)

    1995-11-20

    Chemical sensor is made of up transducer that transfers the part and signal recognizing the measurement objects. Biosensor that normally transfers the amount of chemicals into electrical signal is a sensor in which living materials like enzyme, microorganism or antigen, antibody and so forth are used in the recognition part. Recently, the structure or the function of the living materials is clarified gradually with the significant progress in biofeedback, however, the synthesis of artificial material having same function as that of living materials is extremely difficult. Accordingly, it is very practical to develop high degree sensor function by using living materials with developed function in material recognition part, an important element of the sensor. In this report, solid state biosensor using electrode as a transducer is focused, and specially, recent research progress regarding the amperometric measurement which measures oxidation/reduction current is discussed. 35 refs., 8 figs., 1 tab.

  3. Study on apatite compounds; Apataitokei kagobutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-28

    To clarify the material properties of apatite compounds, the synthesis method, and the evaluation of physical properties of material and elementary technology were investigated. For the study on synthesis and crystal growth, a method of precipitating calcium phosphate on the surface of metal was investigated by means of relatively mild electrolytic method using liquid phase system. A new molding method of Ca defective apatite was established. Composite similar to vital bone was prepared by means of a new low-temperature sintering. For the study on chemical properties, from the model experiments, it was found that the self-organizing phenomenon, which is observed in the composite of apatite and collagen, happened between the organic single molecular film and crystal of apatite. For the study on evaluation of physical properties and elementary technology, the surface and interface of ceramics such as apatite were investigated by means of spectroscopy, the electronic state was analyzed by the quantum chemical calculation, and the crystalline structure was analyzed using X-ray equipment. 270 refs., 102 figs., 10 tabs.

  4. Study of biogas storage; Biogas no chozo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, I.; Kimura, T.; Umeda, H. [Meiji University, Tokyo (Japan)

    1997-11-25

    Study was made on the storage method of a methane component in biogas mainly composed of CO2 and methane gases. Methane clathrate as molecular complex is one kind of clathrate compounds. Eight methane gas molecules are absorbed into 46 water molecules, or methane gas of 216 l is absorbed into water of 1 l, resulting in considerable compact methane storage. Although methane clathrate is usually stable only under a condition of low temperature and high pressure, its formation equilibrium shifts toward a low pressure/high temperature side by adding additives such as amine, ether and ketone. Acetone can shift formation pressure from 30 to 10atm at 1degC, and formation temperature from 1 to 10degC at 30atm. Although methane liquefaction is also an efficient storage method, it requires liquefaction temperature and pressure of -83degC and 45.6atm, respectively. The distance between methane molecules in clathrate lattice can be more shortened than that in high- pressure charged gas, suggesting higher storage efficiency. The study result showed that the handling of methane clathrate is possible around room temperature and pressure. 7 refs., 5 figs.

  5. Leading research on brainware; Nokino joho shori no sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Leading research on brainware is conducted to realize the engineering information processing based on the learning, memorization, association, intuition, value judgment, and motivation which are activities of human brains. For the highly integrated information society at the 21st century, it will be essential to establish human-like information processing technology which is considered to be difficult with the conventional computers. The R and D theme for this technology will focus on the development of novel devices and systems by eliciting the principles and key roles of information processing functions of the brain and in living organisms from both viewpoints of the science and engineering and the brain information science. It is considered that important research targets are in elucidating brain functions and the modeling and developing novel devices and systems, such as brain information architecture, neural devices, neural networks, and man-machine interface. Technical trend surveys in the USA, the UK, and Germany were also conducted. 347 refs., 58 figs., 7 tabs.

  6. Research study of conjugate materials; Conjugate material no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper reported an introductory research on possibilities of new glass `conjugate materials.` The report took up the structure and synthetic process of conjugate materials to be researched/developed, classified them according to structural elements on molecular, nanometer and cluster levels, and introduced the structures and functions. Further, as glasses with new functions to be proposed, the paper introduced transparent and high-strength glass used for houses and vehicles, light modulation glass which realizes energy saving and optical data processing, and environmentally functional glass which realizes environmental cleaning or high performance biosensor. An initial survey was also conducted on rights of intellectual property to be taken notice of in Japan and abroad in the present situation. Reports were summed up and introduced of Osaka National Research Institute, Electrotechnical Laboratory, and National Industrial Research Institute of Nagoya which are all carrying out leading studies of conjugate materials. 235 refs., 135 figs., 6 tabs.

  7. Report on the present situation of the FY 1998 technical literature database; 1998 nendo gijutsu bunken database nado genjo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    To study database which contributes to the future scientific technology information distribution, survey/analysis were conducted of the present status of the service supply side. In the survey on the database trend, the trend of relations between DB producers and distributors was investigated. As a result, there were seen the increase in DB producers, expansion of internet/distribution/service, etc., and there were no changes in the U.S.-centered structure. Further, it was recognized that the DB service in the internet age now faces the time of change as seen in existing producers' response to internet, on-line service of primary information source, creation of new on-line service, etc. By the internet impact, the following are predicted for the future DB service: slump of producers without strong points and gateway type distributors, appearance of new types of DB service, etc. (NEDO)

  8. Survey on the energy transportation technology for the alternative energies; Sekiyu daitai energy nado no yuso gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    1991-03-01

    Studied is a system in which hydrogen is produced through a water electrolysis process using clean energy from hydro-electric and solar power generations which can be obtained overseas with relative ease and at a low cost and is converted to a transportable chemical medium for transportation to Japan and utilization as energy like electricity, etc. The hydroelectric power generation is the most realistic alternative energy source in terms of energy density, technology and economy. Described here is the feasibility of development of hydroelectric power generation using rivers in Indonesia and Canada. As chemical substances which can be transportable chemical media, methanol/CO cycle (methanol is synthesized from coal gasified CO and electrolytic hydrogen) or liquid hydrogen cycle are the most practical on a short-term basis, and ammonia cycle and cyclohexane cycle are more advantageous than other cycles on a long-term basis. It is essential to reduce a cost of water electrolysis for each chemical substance. Potential needs are great for distribution and utilization of hydrogen energy regenerated from the transportable chemical medium, but it requires a lot of technological innovations regarding the system structure and materials (safety, particularly). 58 refs., 116 figs., 79 tabs.

  9. Development of large scale wind energy conservation system. Development of large scale wind energy conversion system; Ogata furyoku hatsuden system no kaihatsu. Ogata furyoku hatsuden system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for development of large scale wind energy conversion system. The study on technological development of key components evaluates performance of, and confirms reliability and applicability of, hydraulic systems centered by those equipped with variable pitch mechanisms and electrohydraulic servo valves that control them. The study on blade conducts fatigue and crack-propagation tests, which show that the blades developed have high strength. The study on speed-increasing gear conducts load tests, confirming the effects of reducing vibration and noise by modification of the gear teeth. The study on NACELLE cover conducts vibration tests to confirm its vibration characteristics, and analyzes three-dimensional vibration by the finite element method. Some components for a 500kW commercial wind mill are fabricated, including rotor heads, variable pitch mechanisms, speed-increasing gears, YAW systems, and hydraulic control systems. The others fabricated include a remote supervisory control system for maintenance, system to integrate the wind mill into a power system, and electrical control devices in which site conditions, such as atmospheric temperature and lightening, are taken into consideration.

  10. Leading research in fiscal 1996. Research study on advanced measurement/analysis technology; 1996 nendo sendo kenkyu. Kodo keisoku bunseki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For development of production technologies suitable for environment, safety and advanced information-oriented society by improving the flexibility of production lines, some new measurement technologies were researched. Problem solution was attempted by combining the in-situ multi-dimensional measurement technology capable of easily obtaining various 3-D information with the non-contact photon measurement technology superior in operability and sensitivity under any environment conditions. This solution requires a compact radiation source with higher brightness and wider spectral range, and a high-sensitive detector. The technology concentrating photon onto minute regions, high-efficiency transmission, and control technology of photon wave front are also necessary. Development and international standardization of a common interface is unavoidable. In addition, its network is essential for advanced use of multimedia,. In the future, the comfortable life surrounded by advanced products and multimedia, comfortable social environment, safety and resource saving will be achieved by this technology. 94 refs., 75 figs., 15 tabs.

  11. Report on the fiscal 1995 research cooperation promotion project, `the research cooperation diagnosis survey`; 1995 nendo kenkyu kyoryoku suishin jigyo `kenkyu kyoryoku shindan chosa` hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A diagnosis survey was conducted for Japan to cooperate in researching subjects on technical development in developing countries. In fiscal 1995, surveys were made on the following: (1) recycling technology of biomass industrial waste in the tropical region, (2) small size geothermal exploration in remote islands, (3) waste water recycling system using activated carbon, etc., (4) upgrading of proofreading technology of measuring standards, (5) technology to simply set up conditions for forming engineering plastics, (6) assessment of safety of chemical substances. In (1), energy and useful matters are recovered from oil palm of Indonesia by thermal decomposition technology. In (2), a system is constructed which can effectively explore geothermal energy in remote islands in the east Indonesia. As to (3), a survey is conducted in the Philippines. (4) contributes to upgrading of length measuring standards in Thailand. (5) attempts to improve technology of forming engineering plastics. In (6), research cooperation is made for preventing environmental pollution and health damage by chemical substances from happening in Thailand and for technology for assessing safety of chemical substances which contributes to the proper use of the hazardous material law in Thailand. 28 figs.

  12. Report on preceding researches in fiscal 1998 on the survey and research on conjugate materials; 1998 nendo conjugate material no chosa kenkyu sendo kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research and development has been made on the 'conjugate materials (CM)' , the innovative materials in which ultra fine inorganic and organic structural units of molecular levels are introduced to be oriented regularly in glass matrix to respond to external force conjugately. The current fiscal year reported items having been made clear by further surveys and researches on CM as proposed by the fundamental surveys having been done as the second year. Section 1 summarizes significance of the research and development; Section 2 reports the result of the CM research and survey and the subjects related to application areas of CM; Section 3 reports the result of the CM market research performed newly in the current fiscal year; Section 4 reports the contents and result of the questionnaire survey to glass related small enterprises as to what interest these enterprises will have upon assuming that these CM products have been realized; Section 5 reports the result of surveys on patents and literatures related to photonics; and Section 6 states future problems in the CM research and development, and summarizes the future prospects of CM. (NEDO)

  13. Final report of `research on advanced uses of cast materials`; Chusho kigyo taisaku gijutsu tokubetsu kenkyu `chuzo zairyo no kodo riyo gijutsu ni kansuru kenkyu` shuryo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    Tada, S.; Takahashi, T.; Abe, T. [Tohoku National Industrial Research Institute, Sendai (Japan)

    1997-03-31

    For the advanced utilization of casting iron, temperature differential austempering and partial austempering with the gradient mechanical properties of ADI (austempered ductile iron) by local electric method were experimentally investigated. For the former, gradient mechanical properties are obtained by giving temperature difference to the material in the process of austempering of casting iron, to add the strength and toughness. For the latter, mechanical properties are controlled by repeating partial austempering with changing the isothermal transformation condition by means of local electric method, to obtain the strength characteristics with appropriate balance. As a result of the former experiment, function gradient materials could be obtained with continuously changing internal mechanical properties. The fabricated material provided different properties depending on the direction of load. Radial crushing strength constant of the ring material depended on the treatment temperature of inside surface of the specimen. Fatigue and yield strengths can be simultaneously improved. As a result of the latter experiment, it was found that the mechanical properties can be improved at arbitrary part by the partial austempering. 13 refs., 25 figs., 4 tabs.

  14. Report on the fiscal 1996 research cooperation promotion project, `the research cooperation diagnosis survey`; 1996 nendo kenkyu kyoryoku jigyo `kenkyu kyoryoku shindan chosa` hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A diagnosis survey was conducted for Japan to cooperate in researching subjects on technical development in developing countries. In fiscal 1996, surveys were made on the following: (1) establishment of the industrial base (Vietnam), (2) preservation of biological diversification and the continuous utilization (Brazil), (3) fostering of the industry of automobile parts (Thailand), (4) finding out of items on environment related fields (India), (5) environmental response type system for effective use of water resource (the Philippines), (6) small size geothermal exploration in remote islands (Indonesia). (1) is research cooperation for welding technology, powder metallurgy technology, hypoid gear manufacturing technology, and iron making technology by the direct reduction method. In (2), research/development are conducted in cooperation with research institutes in Brazil on survey/identification/utilization of bioactive substances from biological resources in Brazil. In (4), an examination was made of the seeds for research cooperation in technical fields such as environment and energy. Having a strong relation with the industrial circle, SCIR is carrying out researches on aerospace, petrochemical, biology, electronics, medicines/drug, etc., which indicated fulfillment of intellectual infrastructure in India. 52 figs.

  15. Development of the new generation real sports open car; Jisedai real open sports sha no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Uehara, S. [Honda Motor Co. Ltd., Tokyo (Japan)

    2000-01-01

    With the concept of a 'New Generation Real Open Sports Car' in mind, a two-seater open sports car, the HONDA S2000, has been developed. Applying the newly developed technologies listed below, the S2000 became a roadster satisfying demands for environmental protection, safety and comfort, as well as being 'fun to drive' which is the fundamental requirement of a sports car. (1) The engine-layout behind the front axle that enabled a weight distribution ratio of 50 : 50 between the front and rear axles, lowered the center of gravity, and reduced the yaw moment of inertia. (2) The open body, whose weight, body stiffness and crash safety performance are equal to those of a closed body through carrying out measures such as raising the floor tunnel and giving it a box shape section. (3) The 2 L inline 4-cylinder engine that offers high power of 125 PS/L and low exhaust emission levels half of those of Japanese regulation for the year 2000. (4) The 6-speed manual transmission that handles the rev limit of 9000 rpm and offers a light and smooth shift feel. (5) The wind management technology and heater performance that make driving with the top down comfortable even in the winter. (author)

  16. Development of base isolation system for existing bridges; Kisetsu kyoryo no menshinka koho no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Nagumo, H.; Hishiki, T.; Niihara, Y.; Aizawa, J.; Ichinomiya, T. [Kajima Corp., Tokyo (Japan)

    1997-12-20

    The new base-isolation system has been developed for existing bridges, which meets the functional and executional requirements. Described herein are outline of the new system, results of the shaking table tests conducted to confirm its validity, and simulation analysis of the test results. These results confirm that the new system, which uses horizontal force dampers and sliding bearings, is suited for existing bridges. Its basic characteristics are also described. The new system exhibits a sufficient base isolation effect, because the observed acceleration of the girder can be reduced to 1/2 to 1/3 that of a girder supported by the conventional system. It is also confirmed that the relative displacement between the pier and girder during a level 1 earthquake is below 5mm for an RC bridge with a span of 20m or so, a level which does not lead to damage of the bridge joints. The simulation analysis indicates that the new system could reduce the relative displacement between the pier and girder during a level 1 earthquake to 1/5 that associated with the bridge supported by the conventional system, by additional damping effects coming from the horizontal force dampers and sliding bearings. The simulation analysis also indicates that a bridge destroyed by the Great Hanshin Earthquake would have been safe if it had been supported by the new system, which also confirms sufficiently improved resistance to earthquake provided by the new system. 4 refs., 14 figs., 6 tabs.

  17. Present developmental conditions petroleum substituting energies in the EU; Sekiyu daitai energy kaihatsu no genjo (EU)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report outlines the policy of development and introduction of petroleum substituting energies, and its diffusion situation in the EU. On the policy, development, introduction and diffusion of petroleum substituting energies in the EU, based on the new EU energy white paper issued in fiscal 1996, the policy of energy and environment in every EU country is first outlined. The policy of and practical approach to petroleum substituting energies in every EU country are next described. In particular, since ALTENER which has been continuously promoted by the EU for 3 years as main control measures against CO2 is newly moving toward the second plan, the trend of ALTENER and the new SAVE2 plan are presented. The content of JOULE-THERMIE is also precisely presented which is the new energy program of the 4th framework R & D program. In relation to the developmental trend of alternative energies to oil in the EU until 2020, its prediction result is presented on the basis of the latest study promoted by EC committee in the ALTENER plan. 10 tabs.

  18. Present situation and subjects of fuel cell development. Nenryo denchi kaihatsu no genjo to kadai

    Energy Technology Data Exchange (ETDEWEB)

    Taniguchi, Yoshisada (Fuji Electric Co., Ltd., Tokyo, (Japan))

    1990-02-10

    This report explains the present situation of the development of phosphoric acid type fuel cells. Tests on New Energy and Industrial Technology Development Organization {prime} s 1,000kW plant for distribution arrangement and two plants (two electric power companies) to substitute thermal power were completed in 1989. With the success of these tests, Japanese technologies on fuel cells were improved greatly. Two projects on on-site type cells for detached islands and for industry using city gas are on progress. In civil circles, there are several projects on progress such as Tokyo Power Company {prime} s Goi plant of 11MW whose operation is going to be started in 1991. As for development situation abroad, the USA has carried out field tests on a 4.5MW plant and many 12.5KW and 43kW plants for gas utility, and it is now developing a 200kW plant. On the other hand, European countries make researches mainly on aldali type fuel cells, and they make it a policy to purchase elemental cells of phosphoric acid type from Japan and the USA. 1 fig., 3 tabs.

  19. Development of terephthalic acid production process; Terefutarusan seizo process no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, N.; Atsumi, K.; Honji, A.; Suzuki, H. [Hitachi, Ltd., Tokyo (Japan)

    1997-12-01

    The demand of high-purity terephthalic acid is rapidly increasing as raw material for polyester fiber and PET. Hitachi Ltd. began to develop a production process of terephthalic acid to meet its demand. Terephthalic acid is produced from paraxylene and air by liquid phase oxidation in acetic acid solution using catalyst, however, this method cannot produce high-purity terephthalic acid by itself because of various byproduced impurities. Hitachi Ltd. now developed a hydrogenation catalyst and crystallization method for purification to remove impurities byproduced in a terephthalic acid production process. This paper outlines a terephthalic acid production process, in particular, a purification process. In a purification process, raw terephthalic acid mixed with water is dissolved by heating, and purified by hydrogenation through contact of impurities and hydrogen on an activated carbon-carried Pd catalyst layer. Purified terephthalic acid (PTA) is thus obtained through crystallization, separation and drying processes. 6 refs., 4 figs.

  20. Development of practical diet for aquaculture of Japanese flounder; Gyofun wo sakutenshita hirameyo shiryo no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, K.; Furuta, T.

    2000-07-01

    Feeding experiments were conducted to examine the potential use of defatted soybean meal (SBM) in combinations with blood meal (BM), corn gluten meal (CGM) and freeze dried meat of blue mussel (BMM) as a partial replacement of fish meal (FM) in the diet of Japanese flounder. Availability of CGM in combinations with BM and/or BMM was also examined. Juvenile fish of about 4 g in initial body weight were fed diets to satiation twice daily, 6 days per week for 8 weeks at 20 degree C in both feeding experiments. Weight gain of fish fed diet replacing 45% FM protein with SBM was not different from that of fish fed the control diet containing FM as a protein source, however, feed efficiency (FE) in fish fed the SBM diet was significantly lower. Growth and feed performance of fish fed diet replacing 45% FM protein with SBM and BM were comparable to those of fish the control diet. Inclusion of 5% BMM for equal amount of SBM in the SBM-BM diet improved the growth and FE of the flounder remarkably and both values were significantly higher than those in the control. Replacing 55% of FM protein with SBM and CGM or SBM and BM resulted in poor growth performance. There were not marked differences in hematological characteristics together with proximate composition of the whole body of cultured fish fed the dietary treatments. Weight gain and FE of fish fed diet replacing 40% FM protein with CGM were inferior to those of fish fed the control diet containing FM as a protein source. Replacement of 40% FM protein with CGM and BM made those parameters worse. Inclusion of BMM in CGM-BM diet did not improve the growth of fish. Adverse effects of replacing FM protein with CGM and/or CGM and BM were stronger with increasing replacement level. These results indicate that SBM is highly available as alternative protein source for fish meal in the diet of Japanese flounder. SBM in combination with BM successfully replace about 45% of FM protein in the diet without supplemental amino acids. Furthermore, it is suggested that more replacement can be attained with inclusion of 5% BMM in the SBM diet. CGM is not considered to be useful ingredient on practical bases. (author)

  1. Development of field welding technology for rails; Tetsudo rail no genchi yoyu yosetsu gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Okumura, M.; Karimine, K.; Uchino, K.; Yurioka, N. [Nippon Steel Corp., Tokyo (Japan)

    1995-02-28

    A new element technology is outlined which is for welding regular rails in the field and making a long rail. A new EAW (Enclosed Arc Welding) has been developed for the purpose of improving vibration and noise due to the local abrasion of the existing EAW and improving the deterioration of resistibility against rolling fatigue breakage and the generation of transverse fissure due to the high temperature liquefaction crack. It has been verified that a highly carbonized metal improves the local abrasion and the generation of crack. Problems were brought up, in the case of welding rails by thermit welding (TW) utilizing the reaction of Al powder and brown iron oxide, such that strength was rather small against the bending fatigue of a joint and that the soundness of internal property of a welded part was likely to fluctuate. A test was carried out concerning the latter problem, and it was revealed that the temperature to pour molten steel dropped, whether the Al compound was insufficient or excessive, possibly causing reaction defects. As a technology to replace EAW and TW techniques, an automatic welding was developed which combinedly used narrow groove electro-slag welding and gas sealed arc welding. Further, as an after-treatment of this technology, a method was developed to remove a weld overlay. 19 refs., 16 figs., 6 tabs.

  2. Development of the new RB26DETT engine. Shingata RB26DETT engine no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ura, S.; Nakamura, K.; Fujita, H.; Eto, T.; Yamanaka, J. (Nissan Motor Co. Ltd., Tokyo (Japan))

    1989-12-25

    This paper introduces the RB26DETT engine which was developed by Nissan Motor Co., Ltd., for use in the new high-performance Skyline GT-R sports coupe. This is 2.6 liter DOHC twin-turbo engine developed for the aim to built the world {prime} s best mass-produced in-line 6-cylinder engine by integrating the most advanced techniques. It features the adaptation of twin ceramic turbochargers which vastly reduce the interference between exhaust gas flows, and the equipment of large-capacity air-cooled intercooler system which greatly improves the cooling capacity. Other features include the applying of six throttle butterflies for improved intake air response during acceleration and a lighter weight valvetrain. As the result, high output, excellent throttle response and an impressive rotation speed were attained and world-top-class performance surpassing that of sports car engines was obtained. 14 figs., 3 tabs.

  3. Development of mild charging turbocharger for micro-cars; Keijidoshayo mild turbo charger no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Koike, A.; Takahashi, Y.; Koike, T.; Furukawa, H. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    2000-01-01

    IHI has developed a new concept turbocharger for micro-cars which were totally re-designed and re-sized to meet the 1998 safety standard in Japan. The micro-ears corresponding to the new standard are heavier and require more powerful engines, as well as lower fuel consumption. The new turbocharger, model RM3, was developed to satisfy the requirements of the new cars. RM3 has the design concepts of low cost, high performance at low engine speed and low turbine-wheel inertia moment. New technologies developed for the new turbocharger include integrated housing, constant diameter turbine-wheel and cassette semi-floating bearing. (author)

  4. Development of hydraulic brake actuator for active brake control; Active brake seigyoyo yuatsu booster no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Konishi, Y.; Hattori, M. Sugisawa, M.; Nishii, M. [Aisin Seiki Co. Ltd., Aichi (Japan)

    1997-10-01

    Recently, application of active brake control systems of the vehicle are increasing. (Vehicle stability control, Panic brake assist ) We have developed a new hydraulic brake actuator for active brake control systems. New hydraulic brake actuator is composed of the three parts. (Hydraulic booster unit, Power supply unit, Control valve unit) This report describes the construction of the new hydraulic booster unit. 2 refs., 10 figs.

  5. Hierarchical functional model for automobile development; Jidosha kaihatsu no tame no kaisogata kino model

    Energy Technology Data Exchange (ETDEWEB)

    Sumida, S. [U-shin Ltd., Tokyo (Japan); Nagamatsu, M.; Maruyama, K. [Hokkaido Institute of Technology, Sapporo (Japan); Hiramatsu, S. [Mazda Motor Corp., Hiroshima (Japan)

    1997-10-01

    A new approach on modeling is put forward in order to compose the virtual prototype which is indispensable for fully computer integrated concurrent development of automobile product. A basic concept of the hierarchical functional model is proposed as the concrete form of this new modeling technology. This model is used mainly for explaining and simulating functions and efficiencies of both the parts and the total product of automobile. All engineers who engage themselves in design and development of automobile can collaborate with one another using this model. Some application examples are shown, and usefulness of this model is demonstrated. 5 refs., 5 figs.

  6. Development of catalyst for diesel engine; Diesel engine yo shokubai no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, H.; Furutani, T.; Nagami, T. [Toyota Motor Corp., Aichi (Japan); Aono, N.; Goshima, H.; Kasahara, K. [Cataler Industrial Co. Ltd., Shizuoka (Japan)

    1997-10-01

    The new concept catalyst for diesel engine has been developed. When the exhaust temperature is low, SOF and HC are temporarily adsorbed by the adsorbent within the catalyst and are oxidized as the temperature rise. The process of this development have manifested as follows. (1) The coating material is important factor to govern the oxidation activity. (2) SOF is reduced by the coating material in low temperature less than 200degC. (3) The coating material, which has low SO2 adsorbing rate suppress the sulfate formation at high temperature. 2 refs., 11 figs., 1 tab.

  7. Development of a platoon driving AHS; AHS jikkensha ni okeru gunsoko seigyo no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Seto, Y.; Inoue, H. [Nissan Motor Co. Ltd., Tokyo (Japan)

    1997-10-01

    Nissan and the Public Work Research Institute of the Ministry of Construction are developing an Automated Highway System. We are investigating a longitudinal control system in AHS. In this paper, a vehicle control method using two actuators an engine and a brake, is described. Experimental and simulated results are shown. A Platoon driving control method using road-to-vehicle and vehicle-to-vehicle communication is described. And the influence of the communication on the control performance is shown by experiments and simulation. The effects of the communication device and control device mentioned above are verified by experimental results in an AHS field test conducted in September 1996 on a dosed highway. 5 refs., 8 figs.

  8. Development of crankshaft dynamic stress prediction; Jitsudoji crankshaft oryoku yosoku shuho no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, S.; Iwamoto, A.; Miyazawa, H.; Sato, K.; Ozaki, H. [Honda R and D Co. Ltd., Tokyo (Japan)

    1997-10-01

    In this paper, the development of the simulation model which predicts the stress of the crankshaft under running condition precisely is described. This simulation model considers about the nonlinearity of the oil film stiffness in the main bearing, the dynamic characteristic of the crankshaft system including resonance and the cylinder block stiffness. By the development of this stress analysis simulation, the stress m each part of the crankshaft during durability testing could be precisely predicted. 1 ref., 10 figs.

  9. Development of in-vehicle navigation system using VICS information; VICS taio nabigeshon system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, K.; Yamanaka, K.; Nakamura, K. [Honda Research and Development Co. Ltd., Tochigi (Japan). Tochigi Lab.

    1997-02-01

    Since the Vehicle Information and Communication System Center (VICS Center) started its operation from April, 1996, a navigation system corresponding to VISC has been developed which utilizes the information from this VISC Center and provides driver it as effective information for selecting a route. In this article, the outline of the above navigation system developed by Honda is introduced. The VICS system is composed of the functions of four domains, namely information collection, information processing and editing, information provision, and information utilization, and offers renewed information in every 5 minutes. Its telecommunication system adopts electric wave beacon, optical beacon and FM multiplex broadcast and the areas in which the information is offered are Tokyo and its surroundings, and Osaka and its surroundings, and will be expanded gradually to other areas. Regarding the in-vehicle system, a VICS receiver set is explained in detail and concerning the utilization of VICS information, the function of displaying traffic information, the function of sound and voice guidance, the function of dynamic route guidance, etc. are explained. 5 refs., 9 figs., 6 tabs.

  10. Synthesis of new erodable polymers response to environmental stimuli; Atarashii kankyo chowagata bunkaisei plastic no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kato, M.; Nagasaki, Y. [Science University of Tokyo, Tokyo (Japan). Faculty of Industrial Science and Technology

    1997-02-01

    This report relates to the designing of functional materials that decompose in response to various signals. A derivative of {alpha}-bromomethylstyrene is caused to act on the living anions of {alpha}-methylstyrene for the synthesis of a pyrolytic polymer having unsaturated groups at its terminals. The terminal double combinations of this polymer split under the influence of heat, acid, or base for depolymerization which is quantative, and the decomposition temperature may be controlled by replacing terminal phenylallylic groups with methyl groups or phloro-groups. Furthermore, a novel polythyramine polymer is synthesized with its principal chain constituted of NCH2CH2Si, the principal chain easy to disintegrate when exposed to an electron beam. The polymer is signal-responsive and may be patterned by use of an electron beam. As a temperature-responsive polymer with the hydrolytic feature controlled, poly(thyroxy ethylene glycol) is obtained from a derivative of diaminosiloxane and oligo-oxyethylene. This is a high-mobility, temperature-responsive material whose hydrolysis may be controlled. 3 refs., 2 figs.

  11. Present status of bulk high temperature superconductors; Baruku koonchodendotai kaihatsu no genjo

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, Masato [Superconductivity Research Laboratory, Tokyo (Japan). Division 3

    1999-03-25

    Recent advancement in materials processing enabled us to grow large single-grain bulk RE-Ba-Cu-O superconductors (RE: rate earth elements) with high critical current densities. These superconductors can exhibit a large electromagnetic force with the interaction of external magnetic fields. Various devices have been developed by utilizing such a force: magnetic bearings, flywheels for energy storage, load transport, hysteresis motors, and several levitation devices. A large magnetic field can also be trapped by bulk superconductors, which can function as a quasi-permanent magnet. Trapped field values have already reached 10 T, thus leading to many novel applications of high trapped field magnets. The final target will be a second-generation Maglev train. (author)

  12. Development of active control technique for engine noise. Engine soon no active seigyo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, H.; Nakao, N.; Butsuen, T. (Mazda Motor Corp., Hiroshima (Japan))

    1994-03-31

    As a measure to reduce engine noise in a car, the active noise control (ANC) technique to eliminate noise by another noise of antiphase has been studied. The conventional filtered-x LMS control algorithm has been generally applied to the ANC, but a large quantity of arithmetic operation used for filtering is practically problematic. This paper proposes the new algorithm of which control effects and practicability have been improved by utilizing periodicity of engine noise and by introducing the idea of error scanning. This algorithm requires only 30-50% of the arithmetic operation of the above LMS method. Concerning the actual system structure, arrangement and the number of microphones have been examined based on the detailed measurement results of the spatial distribution of noise in a car. As a result, the suitable arrangement of only three microphones to reduce noise in the whole interior space of a car is found. Through the experiments, maximum noise reduction of 8dB (A scale) has been achieved at each seat position. 7 refs., 9 figs., 1 tab.

  13. Development of austempered ductile iron timing gears; Austemper kyujo kokuen chutetsu timing gear no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, M.; Yamamoto, S.; Numajiri, S.; Nakajima, K. [Mitsubishi Motors Corp., Tokyo (Japan)

    1996-05-01

    To reduce vibration and noise of gears compared with ordinary steel gears for four cycle diesel engine of small commercial vehicles, austempered ductile iron (ADI) gears have been developed, which have excellent mechanical properties and vibration damping properties equivalent to steel gears. ADI is a material with tensile strength of 1,000 MPa, which is made by austempering the ductile iron to change matrix texture into tough bainite. For a new process method of ADI gears, austempering is conducted after gear cutting, and shaving is conducted, finally. Gear materials before austempering can be smoothly machined without deteriorating their machinability, to produce highly accurate gears. Fifteen percent of noise can be reduced for ADI gears during idling of engine, where 0.7 dB can be reduced in the noise level. The ADI gears provide superior pitting resistance to ordinary steel gears. They have nearly equivalent dedendum bending fatigue strength to ordinary soft nitrided steel gears. 6 refs., 12 figs., 2 tabs.

  14. Development of a telecommunication line configuration simulation system; Tsushin kaisen kosei simulation system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Y. [Chubu Electric Power Co., Inc., Nagoya (Japan)

    1997-06-01

    A prototype of line configuration simulation system has been developed, by which route search and check of various conditions of telecommunication line configuration can be conducted using a computer. For the setting and change of telecommunication line, the route search from start terminal to end terminal of the line, search of vacant channels of the pass, and check of various conditions, such as constraint of non-mixing of A/B systems for ensuring the line reliability, transmission delay time and two-route configuration, are currently necessary. With the expansion of telecommunication network, the line configuration works have become further complicated. The developed prototype was verified. For the operation performance, input works of indicating data can be reduced, resulting in the easy input. For the responsibility, processing time was measured for various search patterns. The processing speed in the practical level could be realized by employing various high-speed methods. It takes 80 minutes per line for processing the current line configuration by manual management. It took only 10 minutes for processing using this system. Thus, the effectiveness of this system was confirmed. 13 figs., 5 tabs.

  15. High resolution seismic refraction method (development and applications); Koseido kussetsuho jishin tansa no kaihatsu to tekiyorei

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, K.; Saito, H. [OYO Corp., Tokyo (Japan)

    1998-10-01

    Described herein are measurement/analysis procedures of the high-resolution seismic refraction method. Recently, use of explosives has been limited for many explorative activities. The measurement systems and waveform processing procedures described herein can minimize use of explosives and widen applicability of non-explosive seismic sources. The seismic refraction method is now advanced, e.g., to process large quantities of high-quality data, use tomographic algorithm and include analysis of vibration-receiving points in holes, and is applicable to grounds of complicated structures, for which the conventional method is difficult to use. The new method is aided by a personal computer to give the analysis results almost automatically, thereby establishing objectivity of the explorative results and securing data quality. The high-resolution seismic refraction method, aided by the new techniques of measurement/analysis, can now give the results in a much shorter time than the conventional one. 40 refs., 22 figs.

  16. Why do we develope a ceramics heat insulated engine. Ceramic engine wo ikani kaihatsu suruka

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, H. (Isuzu Motors 1td., Tokyo (Japan))

    1990-10-20

    This paper introduces the development of ceramics engines. If pistons and cylinder liners, etc. are constructed by the use of silicon nitrides which are expected as structure-use ceramics and combined with the insulated structure of the outer circumference of the engine, the cooling system of the engine can be removed and the engine becomes extremely light and compact one without a radiator, a fun and a cooling jacket. The thermal insulated turbo compound engine now under development is the system in which the combustion chamber is constructed by the use of ceramics. The heat energy which used to be diffused into the cooling system is displaced to the exhaust gas side and the high temperature exhaust gas drives turbines to generate power. In order to make use of not only the above-mentioned thermal insulation and heat resistance but light weight, wear resistance and low friction, ceramics parts more than 15 kinds are used for the engine. Improvement over 30% in heat efficiency is aimed at for this engine. 5 refs., 4 figs.

  17. Development of bridge management system (BMS); Bridge Management System (BMS) no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Miyamoto, A.; Kushida, M. [Yamaguchi University, Yamaguchi (Japan). Faculty of Engineering; Adachi, Y. [Hanshin Expressway Public Corp., Osaka (Japan); Matsumoto, M. [Kobe University, Kobe (Japan)

    1997-03-20

    With an objective to develop a bridge management system (BMS) which can execute overall management of road networks, discussions were given on the subject taking advantage of a result of the output from a concrete bridge diagnosis expert system. As its first step, a certain bridge was noticed to discuss an optimal maintenance and management measure which takes into consideration the safety, economic efficiency, functionality, and environmentality. The system has made it possible to estimate deterioration of the bridge after repair and reinforcement by proposing a deterioration curve and setting different hypotheses as a method to forecast performance deterioration of bridge members. Necessity of repair and reinforcement at the time of checking was determined from the result of an output from the expert system to select a construction method. A scheduled number of service years is set, all of the combinations of maintenance and management measures which satisfy the scheduled service life were retrieved, and an optimal maintenance and management measure was indicated, whose total cost is minimum among the proposed measures. Applying this MBS is capable to some extent of evaluating the effect of executing different measures and making economical optimization. 15 refs., 12 figs., 18 tabs.

  18. Study mission report on geothermal development in Italy. Itaria (Chinetsu kaihatsu chosadan hokoku)

    Energy Technology Data Exchange (ETDEWEB)

    1993-02-25

    Geothermal power generation installed capacity at the end of 1991 was 509 MW, corresponding to approx. 1.2 % of total power generation installed capacity 43,500 MW of ENEL at that time. As the future plan for geothermal power generation, it is scheduled to double the current installed capacity to 1,118 MW in 2000 and make it 1.7 % of the total power generation installed capacity 64,829 MW at that time. It is the policy to concentrate the future geothermal development in Tuscany Province and Latium Province successively, and in addition to the already developed sites in these provinces, the exploration of newly developed sites has been progressed energetically. The forthcoming development is now being conducted with the main emphases on the following regions; it is, Larderello and its surrounding region, Travale and Radicondoli region, Monte Amiata region and Latera region. As for the geothermal direct utilization, it is widely applied to utilize the heat source of geothermal steam for district heating in local municipalities and green house cultivation, however, utilization of geothermal brines for fish culture is remained at the experimental stage or the private level. 13 refs., 50 figs., 12 tabs.

  19. Thermal storage and transport technology using PCM; PCM chikunetsu netsuyuso gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yamanishi, A.; Nakamuima, M.; Kakihara, T.; Konishi, S. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    2000-05-01

    The fluid type PCM (Phase Change Material) for thermal storage and transport systems has the advantage of saving energy for many kinds of energy systems. Emulsion type PCMs based on n-paraffins with melting points of 5 degree C and 60 degree C have been developed, which will be applied to air-cooling systems and waste energy recycling systems. Based on investigations of methods to cancel supercooling state and selection of the surfactant, PCMs resistant to damage from the heating-cooling thermal cycles have been developed. Calculations show that the power requirements of the PCM thermal transportation system are much less than those of the water system. (author)

  20. Development of air fuel ratio sensor; A/F sensor no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Sakawa, T.; Hori, M. [Denso Corp., Aichi (Japan); Nakamura, Y. [Toyota Motor Corp., Aichi (Japan)

    1997-10-01

    The Air Fuel Ratio Sensor (A/F sensor), which is applied to a 1997 model year Low Emission Vehicle (LEV) was developed. This sensor enables the detection of the exhaust gas air fuel ratio, both lean and rich of stoichiometric. It has an effective air fuel ratio range from 12 to 18 as required for LEV regulation. It has the fast light off, - within 20 seconds - to minimize exhaust hydrocarbon content. Further, it has fast response time, less than 200 msec, to improve the air fuel ratio controllability. 3 refs., 7 figs.

  1. Development of chemical monitoring system in geothermal well. Chinetsusei no kagakuteki monitoring system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Hiroto, K.; Kusaba, S.; Yamauchi, M. (The Kyushu Electric Power Co. Inc., Fukuoka (Japan))

    1993-03-31

    An expert system was constructed to predict the attenuation trend of geothermal well from various kinds of data on the geothermal well of geothermal plant and the chemical knowledge. The logging data and chemical analysis data of 100 wells or more which were drilled at Hacchobaru and Otake areas were collected in the data base. The knowledge concerning the situation change of geothermal well and the reservoir was obtained from the history of attenuation of geothermal well which stopped the gushing in the past at Hacchobaru and Otake areas. It was summarized in six categories of reason for stop of gushing of geothermal well from the phenomena observed in more than 110 items. For quantifying the input data to the expert system, the data on the time course of gushed steam quantity, pit mouth pressure, and temperature change of reservoir obtained from the change in chemical composition such as silica temperature, Na-K-Ca temperature, Na-K temperature, and Cl temperature were employed. The results of prediction of attenuation and the estimation of attenuation cause of some geothermal wells at Hacchobaru and Otake areas according to this system were objectively reasonable. 5 refs., 19 figs., 3 tabs.

  2. Development of S-wave portable vibrator; S ha potable vibrator shingen no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kaida, Y.; Matsubara, Y. [OYO Corp., Tokyo (Japan); Nijhof, V.; Brouwer, J.

    1996-05-01

    An S-wave portable vibrator to serve as a seismic source has been developed for the purpose of applying the shallow-layer reflection method to the study of the soil ground. The author, et al., who previously developed a P-wave portable vibrator has now developed an S-wave version, considering the advantage of the S-wave over the P-wave in that, for example, the S-wave velocity may be directly compared with the N-value representing ground strength and that the S-wave travels more slowly than the P-wave through sticky soil promising a higher-resolution exploration. The experimentally constructed S-wave vibrator consists of a conventional P-wave vibrator and an L-type wooden base plate combined therewith. Serving as the monitor for vibration is a conventional accelerometer without any modification. The applicability test was carried out at a location where a plank hammering test was once conducted for reflection aided exploration, and the result was compared with that of the plank hammering test. As the result, it was found that after some preliminary treatment the results of the two tests were roughly the same but that both reflected waves were a little sharper in the S-wave vibrator test than in the plank hammering test. 4 refs., 9 figs., 1 tab.

  3. Development of pressurized coal partial combustor; Kaatsu sekitan bubun nenshoro gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Kawamura, K. [Kawasaki Heavy Industries, Ltd., Kobe (Japan); Tanaka, T. [Chubu Electric Power Co. Inc., Nagoya (Japan); Muramatsu, T. [Electric Power Development Co. Ltd., Tokyo (Japan)

    1996-09-01

    The coal partial combustor (CPC) uses a combustion technology with which coal is burned at elevated temperatures and under revolution, the constituents are captured on the furnace wall and removed as molten slag from the furnace. This is a combustion technology to reduce load of ash on subsequent devices. To generate a molten condition, it is necessary to raise the combustion temperature as high as possible (to about 1600 degC in the furnace), but this is effective for a gas turbine composite power generation system. An efficiency of higher than 45% may be expected at the power transmission terminal. As an operation on subsidy from the Agency of Natural Resources and Energy, the normal-pressure CPC technology has already been established, and a research on pressurized CPC is being progressed since fiscal 1991. The research is in progress with a schedule that elemental tests for 7 tons per day production are conducted until fiscal 1995, a 25 tons per day pilot plant will be completed by November 1997, and verification tests for long-term continuous operation will be implemented until 1998. The 7 tons per day elemental tests have identified gasification performance and slag extraction performance using five types of coal having different properties. 7 refs., 10 figs., 4 tabs.

  4. Development of pressurized internally circulating fluidized bed combustion technology; Kaatsu naibu junkan ryudosho boiler no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ishihara, I. [Center for Coal Utilization, Japan, Tokyo (Japan); Nagato, S.; Toyoda, S. [Ebara Corp., Tokyo (Japan)

    1996-09-01

    The paper introduced support research on element technology needed for the design of hot models of the pressurized internally circulating fluidized bed combustion boiler in fiscal 1995 and specifications for testing facilities of 4MWt hot models after finishing the basic plan. The support research was conduced as follows: (a) In the test for analysis of cold model fluidization, it was confirmed that each characteristic value of hot models is higher than the target value. Further, calculation parameters required for computer simulation were measured and data on the design of air diffusion nozzle for 1 chamber wind box were sampled. (b) In the CWP conveyance characteristic survey, it was confirmed that it is possible to produce CWP having favorable properties. It was also confirmed that favorable conveyability can be maintained even if the piping size was reduced down to 25A. (c) In the gas pressure reducing test, basic data required for the design of gas pressure reducing equipment were sampled. Specifications for the fluidized bed combustion boiler of hot models are as follows: evaporation amount: 3070kg/h, steam pressure: 1.77MPa, fuel supply amount: 600kg-coal/h, boiler body: cylinder shape water tube internally circulating fluidized bed combustion boiler. 4 refs., 4 figs.

  5. Development of advanced coal cleaning process; Kodo sekitan kaishitsu gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Osaka, S. [Center for Coal Utilization, Japan, Tokyo (Japan); Akimoto, A.; Yamashita, T. [Idemitsu Kosan Co. Ltd., Tokyo (Japan)

    1996-09-01

    This paper aims to develop a clean coal production process which excellently removes environmental pollutant, is low-costed, and need no particular systems for distribution of products. The result of the development was described paying attention to column flotation which is a technology to high-efficiently select particulate regions, particulate heavy media cyclone, magnetic separation, and the basic design of the process into which those above were integrated. The two-stage selection process, which is an integration of column flotation and particulate heavy media cyclone into the conventional coal preparation equipment, can produce low-ash clean coal at high separation efficiency and also suppress the rise in processing cost. This process was also effective for removal of sulfur content and trace metal elements. The use of clean coal at power plant can be effective for not only the reduction in ash treatment amount, but the aspect of boiler operation characteristics such as heat transfer efficiency of boiler furnace wall, ash related troubles, loads of electrostatic precipitator, loads of flue gas desulfurization facilities. 17 figs., 5 tabs.

  6. Development of practical solar-electric vehicle; Jitsuyo fukyugata solar denki jidosha no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Saito, S.; Fujinaka, M. [Tokyo Denki University, Tokyo (Japan)

    1997-11-25

    The paper reported on a Tokyo-Nagoya travel test on a practical spread type solar-electric vehicle, Solar-EV. A comparative study was made running the same type gasoline vehicle, GV. The measured power consumption amount of Solar-EV is 57.6 kWh. By converting it into Mcal unit, an energy consumption amount of 49.5 Mcal was obtained. Further, as to GV, the energy consumption amount of 316 Mcal was obtained using the amount of supply of gasoline (mean heating value: 8.4 Mcal/h) of 37.6 l and the fuel consumption of 16.2 km/l. Accordingly, the energy consumption amount of Solar-EV became a sixth of that of GV. In the cost comparison, the cost of Solar-EV was 1,440 yen (power source price: 25 yen/kWh), which is about a third of that of GV, 3760 yen (gasoline unit price: 100 yen/l). Monocrystal Si solar cells, 270W, installed on hood/roof are connected to the main 288V system (the auxiliary 12V system is amorphous Si), and generate power 4.4 kWh during travel. A total power consumption amount of Solar-EV in the total travel (Tokyo-Nagoya) is 79.9 kWh including the auxiliary system, approximately 6% of which was to be supplied from solar cells. 1 ref., 6 figs., 3 tabs.

  7. Development of fluorine-coated wiper blade; Fusso coating blade no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Awano, Y.; Imamura, S.; Yokoo, K. [Nippon Wiper Blade Co. Ltd., Saitama (Japan); Satoji, F.; Umemoto, N.

    1998-05-01

    Recently many car drivers have used water repellency for windshields to improve a field of view, however, it causes troublesome stick-slip motion of wiper blades. Stick-slip motion increases with frictional load acting on rubber of wiper blades, and fluctuation of frictional load. To prevent such a motion, antifriction materials such as molybdenum and graphite are, in some cases, coated on rubber of wiper blades to reduce frictional load, however, the life of antifriction materials is short because of abrasion of antifriction materials, and such materials also deteriorates the wiping performance of wiper blades. The high-performance long-life wiper blade was thus developed which generates no stick-slip motion for glass coated or uncoated with water repellency by coating a specific fluororesin on rubber of wiper blades. This blade naturally guarantees higher performance and longer wiper blade life than those of conventional blades for not only glass coated with water repellency but also glass uncoated with water repellency. 2 refs., 9 figs.

  8. Development of measurement apparatus for high resolution electrical surveys; Komitsudo denki tansa sokuteiki no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Moriuchi, H.; Matsuda, Y.; Shiokawa, Y. [Sumiko Consultants Co. Ltd., Tokyo (Japan); Uchino, Y. [Cosmic Co. Ltd., Tokyo (Japan)

    1996-05-01

    For the enforcement of the {rho}a-{rho}u survey method which is a type of high-density electrical survey, a multichannel resistivity measuring instrument has been developed. This instrument, in addition to the above, conducts resistivity tomography and various other kinds of high-density electrical survey. A potential produced by a low frequency rectangular current of 1Hz or lower outputted by the transmitter of this instrument is received and measured by the receiver connected to electrodes positioned at 100 or less locations. The receiver comprises a scanner that automatically switches from electrode to electrode, conditioner that processes signals, and controller. A transmitter of the standard design outputs a maximum voltage of 800V and maximum current of 2A, making a device suitable for probing 50 to several 100m-deep levels. The receiver is operated by a personal computer that the controller is provided with. The newly-developed apparatus succeeded in presenting high-precision images of the result of a {rho}a-{rho}u analysis for an apparent resistivity section and of the underground structure, verifying the high quality of the data collected by this apparatus. 10 refs., 5 figs., 1 tab.

  9. Development of a supercritical helium turbine; Chorinkaiatsu heriumu-tabin bochoki no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kato, T.; Kawano, K.; Shinba, T.; Hiyama, T.; Tsuji, H. [Japan Atomic Energy Research Inst., Tokyo (Japan); Saji, N.; Asakura, H.; Yoshinaga, S. [Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan)

    1999-11-10

    The thermal efficiency of helium refrigerator is improved, and the adoption of supercritical pressure helium turbine expander which moves at entrance pressure 1.6MPa and 8-6K inlet temperature in which the JT's style is made to expand as the means in which refrigerating machine main body is miniaturized directly is mentioned. In the meantime, ability adjustment mechanism of the refrigerating machine is required, since the thermal load, which arises in superconducting coil for ITER, fluctuates. Then, Japan Atomic Energy Res. Inst., Ishikawajima-Harima Heavy Industries developed the supercritical pressure helium turbine expander with the capacity variable mechanism in the cooperation. (NEDO)

  10. Organization for breakthrough. How skunkworks developed airplanes; Breakthrough no tameno kaihatsu soshiki. Rokkidosha skunkworks ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Masuda, K. [Civil Aircraft Engineering Service Co., Bellevue (United States)

    1998-07-05

    `Skunkworks` is stated to be a secret research institute or equipments for developing reformative products in the fields of aviation and aerospace. Skunkworks was established in 1943 by Lockheed Company to develop the first jet engine fighter. This team continued after that and successfully developed advanced airplanes. Skunkworks is now used as a pronoun of the development form of this kind. This paper introduces its organization, development form and results. Fourteen rules of Skunkworks are dealt with first. Then the developments of SR-71 supersonic reconnaissance planes and F-117 stealth fighters are described. Skunkworks has successfully developed advanced airplanes in a short time in secret. 3 refs., 2 figs.

  11. Demonstration technology development of new hydrogen energy; Shinsuiso energy jissho gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report describes results of the study on the excess heat generation phenomenon during the electrolysis of heavy water using palladium metals as electrode in FY 1995. For the measurements of excess heat using an open type electrolysis cell during the excess heat generation demonstration model tests, significant excess heat beyond the range of input was not measured both for ICARUS-1 and for ICARUS-2. For the measurements using a fuel cell, high absorbing rate more than 0.85 was stably achieved for highly pure Pd electrode material by heat treatment and surface treatment. The excess heat could be reproduced for plural tests. The heat recovery rate more than 98% was obtained using the NHE type flow calorimetric system. The excess heat measurements using this are examined. For the reactive palladium materials, various materials ranging from single crystal to cold working polycrystal materials were systematically used for the absorbing experiments. Benchmark tests were also conducted through the cooperation with related researchers. 18 refs., 135 figs., 28 tabs.

  12. Development of aerodynamics for solar cars; Solar Car no kuryoku kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, S.; Ozawa, H.; Higashida, D.; Arai, S.; Ozawa, K.; Aoki, T. [Honda Research and Development Co. Ltd., Saitama (Japan)

    1997-04-01

    In the worldwide attempts for environmental problem, various researches and developments have also been executed on vehicles used the new energies. Among them solar cars using solar cell activated effectively solar energy thought to be unlimited for their energy source are also given many attentions for one of the future cars. In this paper, transition of aerodynamic development of Honda`s `Dream` joined since 1990 to the World solar challenge held in Australia in each three year, ranged to 3,000 km of running distance and positioned at the biggest race in the world was introduced. The `Dream` of `96 could be won a victory of the 4th solar car race in 1996 with new record of the race as aimed. The last aerodynamic resistance of the `Dream` of `96 was promoted 11% in C{sub D}{times}A value in comparison with that of the `Dream` of `93, which also established its aim of performance. In shape of vehicle at super low air resistance, shape improvement around tires and finish accuracy of the body surface became also an important point for improvement of aerodynamic features. 2 refs., 13 figs., 4 tabs.

  13. Power conditioner without isolation transformer; Toransuresu power conditioner no shohin kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Okado, C.; Itami, T.; Kimoto, K. [Toshiba Corp., Tokyo (Japan)

    1996-10-27

    A light-weight downsized and high efficiency transformer-less type 4 kW power conditioner (inverter) has been developed. This power conditioner insures the system interconnection protection by monitoring the voltage of two single-phase three-line circuits. The power conditioner has weight of 17.5 kg and efficiency of 94%. Potential fluctuation of photovoltaic cells due to the switching of power devices at the inverter was reduced. Output capacity was reduced in the low input voltage range. Outflow of DC component was prevented in high accuracy by usually correcting the zero point drift of detector, and by using the current detector with excellent linearity. To detect the DC ground fault, and to trip the output side breaker locating at the ground fault current pass, a zero phase converter detection circuit has been developed, by which the DC component can be detected at the DC input side. As a result of performance verification, the efficiency, power factor, EMI level, protection of outflow of DC component, protection of ground fault, protection of single operation detection, and noise level were satisfied. This system is prospective for the diffusion of photovoltaic power generation in the future. 3 refs., 8 figs., 1 tab.

  14. Development and environment of new electric automobile, `Ecovehicle`; Shingata denki jidosha eko vehicle kaihatsu to kankyo

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, H. [National Inst. for Environmental Studies, Tsukuba (Japan)

    1996-10-27

    This paper introduces history of the development of an electric automobile, `Ecovehicle`. It is provided with a high overall energy efficiency compared with an engine vehicle. The Ecovihicle is 1.2m in width, 3.3m in length, 2 seating capacities and 910kg in overall weight with serially connected 56 batteries of each 4V, 40Ah and having the total weight of 269kg. Its travel distance per charging is 130km at a speed of 80 k.p.h. This vehicle is capable of running with an energy of approximately one third as much as that of a light car. In addition, the vehicle is provided with polycrystal solar batteries placed on 0.6m{sup 2} area on the roof and spoiler generating 60W maximum. Assuming the annual duration of sunshine is 1,800 hours, charging is possible for 63kWh annually. Assuming the charging efficiency is 83%, charging is possible about seven times, which is an equivalent of travelling about 1,000km annually. The characteristics for example are the employment of brushless DC motor, use of energy saving switching element IGBT in order to realize a low level of loss in the inverter, in-wheel motor system, and storage of storage batteries in a hollow aluminum frame installed under the floor. 2 refs., 5 figs., 1 tab.

  15. Development of undisturbed sampling method enabling visual observation; Mokushi kanona fukakuran shiryo saishuho no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Asano, I. [Kansai Electric Power Co. Inc., Kyoto (Japan)

    1999-11-10

    A jig was developed for sampling falus sediment, weathered soft rock, conglomerate soil, etc. The jig is characterized by the capability of sampling in an undisturbed state, direct visual observation of collected samples, and the sampling up to 10m in depth. Explained below are the improved points of the jig. The recessed shape at the tip end of a diamond bit was shaped in a semi-circular groove for the purpose of preventing the collected samples from being disturbed by water from a drilled hole. The outer tube, rod and casing pipe were made of Al alloy and, therefore, half as heavy as the conventional components. The material of the inner tube was designed to have two kinds, acrylic and polyester, so that the samples were directly visually observed on site. Evaluations were conducted in verification tests at the original positions. Provision of notches in the diamond bit enabled the application to all grounds. The acrylic inner tube was superior in a weathered sand soil. The polyester inner tube was found excellent in impact resistance. The sampling depth increased by making the drilling tool lightweight and improving the hole maintenance measures. Undisturbed sampling proved possible. (NEDO)

  16. Development of Ultra Super Critical Plant; Chocho rinkai (USC) hatsuden no gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Muramatsu, K. [Electric Power Development Co. Ltd., Tokyo (Japan)

    1996-03-25

    Electric Power Development Co. is improving the development of ultra high pressure and high temperature of steam condition, namely Ultra Super Critical (USC) Steam Condition pressure power generation, practicability of which is very high in recent years, by improving the steam conditions of the traditional coal thermal power generation. As the harmonization of boiler and turbine is necessary for developing the USC, the tests concerning boiler elements and various tests of turbine are conducted at the same time. As for the USC technique development, a feasibility study was carried out in 1980, then Phase-1 was developed by 1993 and the development of Phase-2 started in 1994. Phase-1 uses ferritic material or austenitic material and the targets of their steam temperature are 593{degree}C and 649{degree}C respectively. Phase-2 uses ferritic material as more as possibly and research and development on two steps of reheating and regenerating cycle steam, conditions of which are 30MPa for pressure and 630/630{degree}C for steam temperature are being conducted. 16 figs., 7 tabs.

  17. Development of a downhole seismic source with controlled waveform; Hakei seigyogata kochu shingen no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kuroda, T.; Ikawa, T. [Japex Jeoscience Institute, Tokyo (Japan); Sato, T. [Meiho Engineering Co. Ltd., Tokyo (Japan); Kakuma, H. [Akashi Corp., Tokyo (Japan); Onuma, H. [Engineering Advancement Association of Japan, Tokyo (Japan)

    1997-05-27

    A downhole seismic source which can output continuous waves having arbitrary waveforms was developed. The development was targeted to make tomographic exploration purposed to evaluate geological properties of a ground bed before and after constructing a building in a ground several hundred meters deep from the ground surface. The source is considered to be used in an environment consisting of soft rocks or more robust rocks and having no casing. It can be used in a well hole having a diameter of 100 mm, is capable of measuring P and S waves in a distance between well holes of up to 100 m, can be used at a depth of up to 500 m, and can output waveforms having seismic source spectra of up to 1000 Hz. An oscillation actuator using laminated piezo-electric elements was used for the oscillation element. The seismic source consists of a hydraulic device to clamp the equipment onto hole walls, piezo-electric elements as the oscillation element, and an inertia weight for applying vibration from above and below. To make an oscillation, the main body is first clamped on the hole wall. For horizontal oscillation, the piezo-electric elements contained in a clamping device provide the horizontal oscillation. For vertical oscillation, the piezo-electric elements placed below the main body oscillates the inertia weight. The initially targeted specifications have been achieved. 3 refs., 4 figs., 1 tab.

  18. Demonstration technology development of new hydrogen energy; Shinsuiso energy jissho gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This report describes results of the study on the excess heat generation phenomenon during the electrolysis of heavy water using palladium metals as electrode in FY 1994. For the excess heat generation demonstration model tests, an open type electrolysis cell and a fuel cell type electrolysis cell have been used. A flow calorimetric method has been introduced as a more accurate method of heat measurement, and the working confirmation tests were carried out. To examine the factors of material which are considered to affect the exoergic phenomenon, factors of the improvement in absorbing rate were investigated. Surface observation, microstructure observation, X-ray diffraction, AES surface analysis, EPMA analysis, and SIMS analysis were conducted for the electrode materials after electrolysis. As a result, it was considered that the impurities included as cracks, voids and deoxidizer in materials could affect the deuterium absorbing during electrolysis. In addition, construction of database relating to this investigation was planned, and scientific and technological information data were collected. 1 ref., 110 figs., 20 tabs.

  19. Development and demonstration of optical polarization controller; Hikari henpa seigyo sochi no kaihatsu to jissho

    Energy Technology Data Exchange (ETDEWEB)

    Kurono, M. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1997-04-01

    If fiber transmission light can be controlled in a stabilized polarization state, realization of coherent optical communication is anticipated. In the case of adopting it to OPGW, however, it is necessary to compensate high speed polarization variation caused by lightning strike. But this was difficult in the conventional method. Accordingly, a high speed polarization control method was proposed which uses an electric effect of lithium niobate (LN) crystals. In the study, a polarization control unit was manufactured based on the method proposed and the performance was demonstrated. As a result of measuring output light with input light changed in every state of polarization, the object horizontal polarization component obtained a stabilized light intensity at {+-}0.1dB, and a light intensity of the component slipped out of the horizontal polarization was suppressed under -20dB. To cope with the polarization variation by lightning strike, it is necessary to make the control delay 10{mu}sec or below, and improvement in processing unit, etc. may make it possible since LN crystals respond below 1{mu}sec. High speed control of the infinitely continuing arbitrary polarization variation became possible. 14 refs., 19 figs.

  20. Experimental research on classified flyash concrete. Part 4. Bunkyu flyash concrete no jikkenteki kenkyu. 4

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, K.; Azuma, K.; Mogi, M. (Okumura Corp., Tokyo (Japan))

    1990-10-09

    Nowadays, the high quality concrete is active in RandD. High strength concrete, lowered in water-to-cement ratio, heightens in viscosity however lowers in workability. Then, in order to design high strength concrete to be improved in characteristics by addition with admixture, study was made with experiment by use of silicahume, fine blast furnace slag powder and classified flyash, provided with fine powder characteristics. As a result of characteristically comparing fresh concrete and curing concrete at 25 to 30% in water-to-cement ratio, each of all the kinds of admixture was effective on improvement in characteristics. Particularly among others, it was confirmed that the classified flyash is high in water-reducing property by fine particulates, shaped sherical, small in added quantity of high performance water-reducing agent at the same slump and good in workability. Together with its above and other advantages, the classified flyash, being 900 to 1000kgs/cm {sup 2} in compressive strength, recorded upon a 28-day curing, was finally confirmed to give an effective adoptability. 14 figs., 8 tabs.

  1. Research on linear driving of wave maker; Zoha sochi no linear drive ka kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, I.; Taniguchi, S.; Nohara, T. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan)

    1997-10-01

    The water tank test of marine structures or submarine structures uses a wave maker to generate waves. A typical flap wave maker uses the wave making flap penetrating a water surface whose bottom is fixed on a tank bottom through a hinge, and the top is connected with a rod driven by rotating servomotor for reciprocating motion of the flap. However, this driving gear using a rotating servomotor and a bowl- screw has some defects such as noise caused by bowl rotation, backlash due to wear and limited driving speed. A linear motor with less friction mechanisms was thus applied to the driving gear. The performance test result of the prototype driving gear using a linear motor showed the possibility of the linear driven wave maker. The linear driven wave maker could also achieve low noise and simple mechanism. The sufficient durability and applicability of the linear driven wave maker mechanism were confirmed through strength calculation necessary for improving the prototype wave maker. 1 ref., 5 figs., 2 tabs.

  2. Research result information for agriculture and environment. No.12; Nogyo kankyo kenkyu seika joho. 12

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-26

    Essential purposes of productivity improvement, which human being have desires in agriculture for a long time, can not be discussed without considering relations with the environment, nowadays. In these situations, significant investigations have been created among the researches in the agriculture and environment field in response to the requirements of the time. In this report, results of 41 main researches submitted to the agriculture and environment research promotion conference in FY 1995 are compiled. This field covers the environment and resource characterization, the agrioecology, and the environment assessment and control. The environment and resource characterization field includes studies on the micro-meteorological mechanism of desert expansion due to excess pasturage, the salt removal function of clays, and the protection of ground water quality by grassland. The agrioecology field includes studies on the antimicrobial substance contained in Glycyrrhiza glabra against the soil decease of potatoes caused by Streptomyces scabies and the new plant growth obstruction substance contained in Sphenoclea zeylanica. The environment assessment and control field includes studies on the producing district change prediction of main grains accompanied with global environmental change and the carbon balance in the ecosystem of farm lands and rice fields. This report includes a lot of noticeable papers. 103 figs., 24 tabs.

  3. Survey and research on precision polymerization polymeric materials; Seimitsu jugo kobunshi zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey and research on the precision control of primary structure of polymeric materials and the precision evaluation technology have been conducted to develop advanced polymeric materials. It is proposed that the three basic processes of polymer synthesis, i.e., addition, condensation, and biomimesis, in forming the precision polymerization skeleton are to be covered through a centralized joint research effort with participation of industry, academia, and the government institute and under the leadership of researchers from academic institutions as the team leaders. For the study of technology trends, international conferences held in UK, Germany, and Hawaii are introduced, and domestic meetings, i.e., Annual Polymer Congress and Polymer Conference, are summarized. In addition, Precision Polymerization Forum and International Workshop on Precision Polymerization were held. The basic studies include a quantum-chemical elucidation of the elementary process in polymerization reaction, time-resolved analysis of polymerization process and polymer properties, synthesis of polymers with controlled microstructures by coordination polymerization using metal complexes, synthesis of polymer with controlled microstructures by precision polycondensation, molecular recognition in catalyst-reaction site, and synthesis of imprinting polymers. 246 refs., 117 figs., 14 tabs.

  4. Research study on harmonized molecular materials (HMM); Bunshi kyocho zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    As functional material to satisfy various needs for environmental harmonization and efficient conversion for information-oriented and aging societies, HMM were surveyed. Living bodies effectively carry out transmission/processing of information, and transport/conversion of substances, and these functions are based on harmonization between organic molecules, and between those and metal or inorganic ones. HMM is a key substance to artificially realize these bio-related functions. Its R & D aims at (1) Making a breakthrough in production process based on innovation of material separation/conversion technology, (2) Contribution to an information-oriented society by high-efficiency devices, and (3) Growth of a functional bio-material industry. HMM is classified into three categories: (1) Assembly materials such as organic ultra-thin films (LB film, self-organizing film), and organic/inorganic hybrid materials for optoelectronics, sensors and devices, (2) Mesophase materials such as functional separation membrane and photo-conductive material, and (3) Microporous materials such as synthetic catalyst using guest/host materials. 571 refs., 88 figs., 21 tabs.

  5. Leading research of smart structural system; Chiteki kozo system no sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The technology trend was surveyed to clarify the themes of smart structural system towards its R and D. The smart structural system is a structural system which incorporates functions of perception, judgment and learning by integrating functions, structures and information, to ensure the structural soundness at real time and control the active-adaptive of shapes. The final goal of it is to make materials and structures similar to organic systems. It has a self-repair function which can detect the generation and propagation of cracks and prevent the destruction positively with conducting self-diagnosis. High performance, high efficiency and energy saving are expected by combining the conversion of design concept into destruction control and the regulation of vibration, noise and shape. Especially, it is effective for the safety of aerospace systems, earthquake disaster measures, and extension of machine life. This report describes the background, purpose, R and D activities in Japan and foreign countries, and basic development themes. In addition, it arranges the needs of various industrial fields systematically, and proposes a concrete concept. Furthermore, the effects expected by the application of smart structural systems and the outline of international technical cooperation are presented. 110 refs., 164 figs., 19 tabs.

  6. Recent surveys and researches on pollinosis in Japan; Kafunsho ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Shido, T. [The Inst. of Public Health, Tokyo (Japan)

    1998-05-31

    In this paper, recent investigations and researches on pollinosis are summarized as centering on the investigation entrusted by the Ministry of Health and Welfare and executed since 1992, and especially the surveys on Japanese cedar pollinosis during 1995 to 1996. The quantity of pollen surveyed in 1995 is the greatest in the survey history of nationwide flying pollen. Particularly, the quantity of cedar and hinoki pollen is 10 to 40 times as many as that in the year before. Consequently, since the sensitization and onset due to the cedar pollen increased greatly, the objects of the surveys and the researches were mainly in respect to the analysis of onset factors of pollinosis, clarification of its natural process, evaluation on the effectiveness of desensitization therapy, the clinical subjects including the confirmation of pharynx symptom and asthma symptom, and the discovery of naturally sensitizing dog. A fact that the quantity of flying pollen concerns the occurrence and degree of the clinical symptom has already been indicated by a clinical observation carried out for a long period of time. In respect to specific prophylaxis and therapy, for the first time the pollen masks and glasses sold on the market are investigated, and the necessity of the verification thereof is described. 27 refs., 7 figs., 5 tabs.

  7. Leading research on supermetals. Part 3. Small component material; Supermetal no sendo kenkyu. 3. Kogata buzai

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The control technology of nanostructure and amorphous structure for small components was studied by literature and patent survey. On nanostructured heat-resistant high-strength materials, a particle dispersion technology by MA method, up-grading technology of steel materials by controlled rolling and oxide metallurgy, and grain refinement technology by phase transformation were extracted. On nanostructured light-weight high-strength malarial, Al base alloy is promising from the viewpoint of resource and energy saving. On amorphous high environment resistant materials, the study on the corrosion resistance of Mo-Ta, Fe-Cr and Ni-Fe alloys is promising. On amorphous magnetic materials, the structure system with an amorphous formability higher than that of previous soft magnetic materials was found. R & D subjects for creating advanced amorphous and nanostructured bulk materials were extracted. Development of supporting technologies for material creation, formation and evaluation is necessary as well as the material design/control technology. 569 refs., 85 figs., 11 tabs.

  8. Research report on human media; Human media no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The human multimedia technology corresponding to users` subjective characteristics was researched to realize information environment producing a sense of unity with human. The human media technology realizes a human sensitive information processing model and a common database easily acceptable sensitively by various users. This technology also should be able to fairly accept and transmit individual`s information and knowledge as multimedia information, and in addition it is required to supply a virtual space with presence. In fiscal 1995, the research committee studied the concrete developmental issue for integrating these advanced fundamental technologies, and as practical images planned the prototype systems such as human media interactive plant operation, supply of environment supporting personal intelligent activities, and virtual medical center. The research committee also discussed development of space mobile media to secure energy-saving and safety of automobiles, and an environment simulation system with participation of many people. 34 figs., 2 tabs.

  9. Carbon dioxide fixation in green plants; Shokubutsu no tansan gas kotei ni kansuru kiso kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Onishi, S. [Kansai Electric Power Co. Inc., Osaka (Japan); Kiyota, M. [University of Osaka Prefecture, Osaka (Japan); Nishimura, M. [Kansai Tech Co., Osaka (Japan)

    1997-09-30

    Concerning the effects of carbon dioxide whose level of concentration is on the rise, the short-term effect that works on the amount of exchanged gas and the long-term effect that works on the growth of green plants are studied by use of several kinds of green plants. Changes in the carbon dioxide absorption rate (photosynthetic rate) in saplings in the wake of a rise in carbon dioxide concentration are studied, and it is found that a rise in carbon dioxide concentration results in an increase in the photosynthetic rate and that the rate rises with an increase in the intensity of light. The effect of temperature is stronger when concentration is higher, with the temperature suitable for photosynthesis moving toward the high-temperature side. Growth is investigated of seedlings of Acacia mangium two years after transplantation, and then it is found that seedlings in the 1000ppm carbon dioxide section are greater by 20% in height and by 30% in trunk diameter than those in the 350ppm carbon dioxide section. In addition, the total dry matter weight is heavier by 82%. As for dry matter accumulation, there are noticeable amounts in the branches, trunks, and roots, while there is but a 15% increase in the leaf area. Leaves fall early in the high carbon dioxide environment, and this is supposedly the cause for a slowdown in the rate of the increase of photosynthesis. 6 refs., 7 figs., 2 tabs.

  10. Investigation research on autonomous responsive materials; Jiritsu oto zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A survey was made on autonomous responsive materials as a new material which reversibly change molecular structures and the aggregation state according to external stimuli. Autonomous responsive materials imitate environmental responsibility in the living organism system and have sensing, control and active functions for external stimuli. The materials are highly efficient and environmentally friendly. In biomimetic materials for soft actuators, drastic changes by temperature of elastic modulus of water-swollen hydrogel are used to the motion. In order to molecularly design stimulus-responsible polymer gel, studied are the relation between the micro structure and stimulus responsibility, dynamic correlation between the micro structure and the macro structure, etc. In the biomedical field, new cure and diagnosis using innovative materials are expected, and the application of autonomous responsive materials to the field is studied. For example, using hydrogel responding the temperature and the surface and controlling by temperature the interaction with components of the organism such as protein and cells, drug delivery in the organism is optimized. Also studied is the application of hydrophilic/hydrophobic changes by temperature to the chromatography. 215 refs., 47 figs., 11 tabs.

  11. Leading research on artificial techniques controlling cellular function; Saibo zoshoku seigyo gijutsu no sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Advanced research and its applicability were surveyed to apply the advanced functional cells to industry. The basic target was set to develop, produce, control and utilize the functional cells, such as intelligent materials and self-regulation bioreactors. The regulation factors regarding apotosis, which is a process of cell suicide programmed within the cell itself of multicellular organisms, cell cycle and aging/ageless were investigated. Furthermore, the function of regulatory factors was investigated at the protein level. Injection of factors regulating cellular function and tissue engineering required for the regulation of cell proliferation were investigated. Tissue engineering is considered to be the intracellular regulation by gene transduction and the extracellular regulation by culture methods, such as coculture. Analysis methods for cell proliferation and function of living cells were investigated using the probes recognizing molecular structure. Novel biomaterials, artificial organ systems, cellular therapy and useful materials were investigated for utilizing the regulation techniques of cell proliferation. 425 refs., 85 figs., 9 tabs.

  12. Leading research on next generation metal production technology; Jisedai kinzoku shigen seisan gijutsu no sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The energy saving environment-friendly technology for low- grade difficult-to-process ores was researched focusing attention on the hydro-metallurgical process of non-ferrous metals. This research aims at development of both effective leaching system of metals, and separation/crystallization system recognizing the property difference between metal ions in solution. The leaching system allows the inexpensive molecular level control of electron transfer, mass transfer of metal ions and stabilization of leached metal ions in a solid/liquid interface. The system thus allows selective leaching of metals from various resources such as difficult- to-leach sulfide minerals to prepare concentrated solutions. The separation system can obtain high-purity solutions including each metal ion by advanced separation/concentration technology from the solutions. The crystallization technology (including electrolysis) is developed for preparing target metal materials by molecular level control of nucleation, particle growth, thin film formation and bulky metal formation processes. Overall energy consumption is reduced to 1/3 of that of the pyro-metallurgical method, aiming at zero emission. 15 refs., 14 figs., 11 tabs.

  13. Leading research on brain functional information processing; No kino joho shori no sendo kenkyu