WorldWideScience

Sample records for nabj panel discusses

  1. Panel discussion

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    The panel discussion at the 10th Allianz Forum on 'Technology and Insurance' dealt with the following topics: New technologies: energy conversion (coal, petroleum, natural gas, nuclear energy, solar energy); infrastructure (transport, data processing); basic products (metallic materials, chemical products, pharmaceutical products); integrated products (microprocessors, production line machines) as well as new risks: political; general economic (financing, market structure); insurance-related, dangers to persons and property; reduction of risks. (orig.) [de

  2. Panel Discussion

    Science.gov (United States)

    Langer, James

    1997-03-01

    Panelists: Arthur Bienenstock, Stanford University Cherry Ann Murray, Lucent Technologies Venkatesh Narayanamurti, University of California-Santa Barbara Paul Peercy, SEMI-SEMATECH Robert Richardson, Cornell University James Roberto, Oak Ridge National Laboratory The Board on Physics and Astronomy is undertaking a series of reassessments of all branches of physics as the foundation of a new physics survey. As part of this project, a Committee on Condensed Matter and Materials Physics has been established under the leadership of Venkatesh Narayanamurti of the University of California-Santa Barbara. The committee has been working since June on a study that will include an illustrative recounting of major recent achievements; identification of new opportunities and challenges facing the field; and articulation-for leaders in government, industry, universities, and the public at large-of the important roles played by the field in modern society. An especially urgent issue is how to maintain the intellectual vitality of condensed matter and materials physics, and its contributions to the well-being of the United States, in an era of limited resources. The forum will feature a panel of materials researchers who are members of the Committee on Condensed Matter and Materials Physics. They will give a brief report on the status of the study and engage in a dialogue with the audience about issues facing the condensed matter and materials physics community. Broad community input is vital to the success of the study. Please come and make your voice heard!

  3. Panel discussion: Nuclear cardiology

    International Nuclear Information System (INIS)

    Schwaiger, M.

    1991-01-01

    The panel discussion opened with a question concerning whether true quantification of myocardial sympathetic presynaptic function or receptor density can be obtained with currently available radiopharmaceuticals. What are the relative advantages of the two general approaches that have been proposed for quantification: (1) The assessment of tracer distribution volume in tissue following bolus injection and (2) quantification based on tracer displacement kinetics following administration of excess unlabeled tracer. It was pointed out that tracer kinetics for the delineation of presynaptic and postsynaptic binding sites by radiopharmaceuticals or radiolabeled receptor antagonists are rather complex, reflecting several physiologic processes that are difficult to separate. Several approaches were examined. The possibility of regional definition of receptor density by PET was questioned and it was noted that regions of interest can be applied to calculate regional receptor kinetics. However, due to the limited spatial resolution of PET, only average transmural values can be determined. The discussion then turned to the discrepancy between the known sparse parasympathetic innervation of the heart and the high density of muscarinic receptors observed with PET. Experiences with MIBG imaging were reported, including uptake in the transplanted heart and interaction of drugs with MIBG uptake

  4. Panel discussion : contract design

    Energy Technology Data Exchange (ETDEWEB)

    Vallas, A. [Sempra Energy Trading, Toronto, ON (Canada); Vegh, G. [MacLeod Dixon, Toronto, ON (Canada); McGee, M. [Energy Profiles Ltd., Etobicoke, ON (Canada); Zaremba, T. [Direct Energy Marketing, Calgary, AB (Canada); Seshan, A. [Larson and Toubro Information Technology, Toronto, ON (Canada); Harricks, P. [Gowlings, Toronto, ON (Canada); Bertoldi, L. [Borden Ladner Gervais, Toronto, ON (Canada); Taylor, R. [Hydro One Networks Inc., Markham, ON (Canada)

    2003-05-01

    This session presented highlights of the comments of 8 panelists who discussed the issue of contract design. The new electricity market in Ontario has introduced the energy trader, who enters into a contract with the consumer, based on the spot price set by the Independent Electricity Market Operator. Every contract has a fixed price payer as well as floating-price payers. If the floating price for a given amount of energy is higher than the fixed price, then the consumer gets the difference. Confusion, however, arises with the purchase of retail physical power in the market, particularly in deciding a fixed rate that the consumer will be paying. Different billing options were also discussed with emphasis on mid to large retail customers that have portfolios in the tens of MW and up to 100 MW or more. figs.

  5. Panel discussion : contract design

    International Nuclear Information System (INIS)

    Vallas, A.; Vegh, G.; McGee, M.; Zaremba, T.; Seshan, A.; Harricks, P.; Bertoldi, L.; Taylor, R.

    2003-01-01

    This session presented highlights of the comments of 8 panelists who discussed the issue of contract design. The new electricity market in Ontario has introduced the energy trader, who enters into a contract with the consumer, based on the spot price set by the Independent Electricity Market Operator. Every contract has a fixed price payer as well as floating-price payers. If the floating price for a given amount of energy is higher than the fixed price, then the consumer gets the difference. Confusion, however, arises with the purchase of retail physical power in the market, particularly in deciding a fixed rate that the consumer will be paying. Different billing options were also discussed with emphasis on mid to large retail customers that have portfolios in the tens of MW and up to 100 MW or more. figs

  6. Open Education Week Panel Discussion

    OpenAIRE

    Doolittle, Peter; Hart, Heath; Hartman, Greg; Seyam, Mohammed; Walz, Anita R.

    2015-01-01

    Introduction by Julie Speer, Associate Dean for Research & Informatics. Open remarks by Anita Walz, Assessment, Open Education & Online Learning Environments Librarian. Mohammed Seyam discusses the value of openly licensed material as a student, research, and graduate assistant. Heath Hart reflects on his adoption of an open educational resource and a (subscribed) online textbook in, “A Rousing Success and an Unmitigated Disaster.” Greg Hartman discusses his experiences authoring open-source ...

  7. Panel discussion: Chemistry aspects of pet radiotracers

    International Nuclear Information System (INIS)

    Kilbourn, M.R.

    1991-01-01

    A panel discussion on the radiotracer development process opened with a question regarding the role of toxicological studies in the process of obtaining a physician-sponsored Investigational New Drug (IND) for a new radiopharmaceutical. Panel members were uniformly supportive of new radiotracer development, expressing their opinions that the regulatory hurdles were there but could be overcome. Several institutions are actively working with regulatory agencies to determine just what toxicology data are relevant to new radiopharmaceutical development in the PET field. The FDA is beginning to understand that the pharmacology of PET tracer doses may be completely different from what is usually important in drug trials. The second part of the panel discussion centered on the role, if any, of the pharmaceutical companies in new radiotracer development. It was pointed out that what the radiochemist is looking for in a radiopharmaceutical is different from what these companies are searching for in a therapeutic drug. Panel and audience members responded to the question: What would a pharmaceutical company gain from collaboration with radiopharmaceutical research laboratories? Several examples were given such as providing crucial data from humans rather than animals; determining individualized drug doses to maximize the therapeutic index of a new drug regimen; and replacing the large amounts of time and money currently invested by drug companies in the radiolabeling and evaluation of metabolites of new drugs

  8. Panel Discussion: Creating a Spirit of Inquiry in the Classroom

    Science.gov (United States)

    Leh, Sandra Kundrik; Melincavage, Sharon M.

    2012-01-01

    A paucity of published literature exists related to the use of panel discussion as a teaching strategy. This article describes the panel discussion, the underpinnings of constructivism and the use of panel discussion to create a constructivist classroom environment. Details of planning, evaluating, and challenges of a panel discussion are also…

  9. Water, food, and population -- a panel discussion.

    Science.gov (United States)

    1996-01-01

    This paper summarizes a conference panel discussion among parliamentarians and researchers on water and food supplies and population growth in Asia. The Western Samoa legislator urged delegates to be aware of human development that was no more than the promotion of values associated with a market economy. Samoans increased their per capita caloric consumption. The food supply is provided locally, and 90% of exports are food products. Food security would be jeopardized by a fivefold increase in population. Samoan human development indicators were relatively good for a developing country. However, the country was still ranked as a low-income, food-deficit country. The Pakistani delegate explained that Pakistan's agriculture used the largest, continuous irrigation system in the world. However, the system operated inefficiently. There was concern that future high population growth would jeopardize food security. Another barrier was institutional mismanagement of irrigation and reliance on imports for staple items. Agricultural productivity must increase to meet the increased needs of continued population growth. All available land is currently under cultivation. Future strategies will necessitate international cooperation and innovative and environmentally sound technology. Professor Xuan remarked that increased population growth and rising demand, decreased water quality, and changing consumption patterns were a threat to water supplies. Sustainable increases in food production would entail better water management: reforestation to reduce and prevent water runoff, better technological exploitation of rain water, and more efficient use of irrigation systems. Better international financing schemes were needed for support of these policy changes. Professor Ness suggested free markets in water in order to price water at actual rates of consumption. Polluters should pay. Water management was also threatened by global warming.

  10. Discussion panel: field test design & data analysis

    Science.gov (United States)

    Daniel M. Schmitt; William E. Waters; B. Leo Cadogan; Gerald S. Walton

    1985-01-01

    I think it is time to open the panel. On my left respectively are Bill Waters, Professor of Entomology and Forestry, University of California, Berkeley; Gerald S. Walton, Biometrician, Northeastern Forest Experiment Station, Hamden; and Leo Cadogan, Forest Pest Management Institute, Canadian Forestry Service, Sault Ste. Marie, Ontario. My name is Dan Schmitt, Program...

  11. Women in the workplace: a panel discussion

    International Nuclear Information System (INIS)

    Perrin, E.V.; Hunt, V.R.; Murray, F.J.; Krekel, S.; Allan, R.R.

    1978-01-01

    The following topics are discussed: problems of women in the workplace; public policy concerning human reproduction; toxic effects of lead in human populations; health hazards of occupational radiation exposure; reproductive hazards on the job; considerations for protecting the unborn; and legal implications

  12. Performance-based regulation. Panel Discussion

    International Nuclear Information System (INIS)

    Youngblood, Robert; Bier, Vicki M.; Bukowski, Richard W.; Prasad Kadambi, N.; Koonce, James F.

    2001-01-01

    Full text of publication follows: Performance-based regulation is a part of the NRC's Strategic Plan and is realizing steady progress in conceptual development for actual applications. For example, high-level, conceptual guidelines have been proposed that would apply to reactors, materials, and waste areas. Performance-based approaches are also being applied in other regulated industries such as FAA and OSHA. The discussion will include comments from speakers from different parts of the nuclear industry and other industries regarding benefits and weaknesses of performance-based regulation. (authors)

  13. SU-A-BRA-05: Panel Discussion

    International Nuclear Information System (INIS)

    Montemayor, V.

    2016-01-01

    Vic Montemayor - No one has been more passionate about improving the quality and effectiveness of the teaching of Medical Physics than Bill Hendee. It was in August of 2008 that the first AAPM Workshop on Becoming a Better Teacher of Medical Physics was held, organized and run by Bill Hendee. This was followed up in July of 2010 with a summer school on the same topic, again organized by Bill. There has been continued interest in alternate approaches to teaching medical physics since those initial gatherings. The momentum established by these workshops is made clear each year in the annual Innovation in Medical Physics Education session, which highlights work being done in all forms of medical physics education, from one-on-one residencies or classroom presentations to large-scale program revisions and on-line resources for international audiences. This symposium, presented on behalf of the Education Council, highlights the work of three finalists from past Innovation in Education sessions. Each will be presenting their approaches to and innovations in teaching medical physics. It is hoped that audience members interested in trying something new in their teaching of medical physics will find some of these ideas and approaches readily applicable to their own classrooms. Rebecca Howell - The presentation will discuss ways to maximize classroom learning, i.e., increasing the amount of material covered while also enhancing students’ understanding of the broader implications of the course topics. Specifically, the presentation will focus on two teaching methodologies, project based learning and flip learning. These teaching methods will be illustrated using an example of graduate medical physics course where both are used in conjunction with traditional lectures. Additionally, the presentation will focus on our experience implementing these methods including challenges that were overcome. Jay Burmeister - My presentation will discuss the incorporation of active

  14. SU-A-BRA-05: Panel Discussion

    Energy Technology Data Exchange (ETDEWEB)

    Montemayor, V. [Germantown Academy (United States)

    2016-06-15

    Vic Montemayor - No one has been more passionate about improving the quality and effectiveness of the teaching of Medical Physics than Bill Hendee. It was in August of 2008 that the first AAPM Workshop on Becoming a Better Teacher of Medical Physics was held, organized and run by Bill Hendee. This was followed up in July of 2010 with a summer school on the same topic, again organized by Bill. There has been continued interest in alternate approaches to teaching medical physics since those initial gatherings. The momentum established by these workshops is made clear each year in the annual Innovation in Medical Physics Education session, which highlights work being done in all forms of medical physics education, from one-on-one residencies or classroom presentations to large-scale program revisions and on-line resources for international audiences. This symposium, presented on behalf of the Education Council, highlights the work of three finalists from past Innovation in Education sessions. Each will be presenting their approaches to and innovations in teaching medical physics. It is hoped that audience members interested in trying something new in their teaching of medical physics will find some of these ideas and approaches readily applicable to their own classrooms. Rebecca Howell - The presentation will discuss ways to maximize classroom learning, i.e., increasing the amount of material covered while also enhancing students’ understanding of the broader implications of the course topics. Specifically, the presentation will focus on two teaching methodologies, project based learning and flip learning. These teaching methods will be illustrated using an example of graduate medical physics course where both are used in conjunction with traditional lectures. Additionally, the presentation will focus on our experience implementing these methods including challenges that were overcome. Jay Burmeister - My presentation will discuss the incorporation of active

  15. 75 FR 8427 - Civil Supersonic Aircraft Panel Discussion

    Science.gov (United States)

    2010-02-24

    ... entitled, ``State of the Art of Supersonics Aircraft Technology--What has progressed in science since 1973... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Civil Supersonic Aircraft Panel Discussion AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of meeting participation...

  16. Teacher Centers and Advisory Work. A Panel Discussion.

    Science.gov (United States)

    Apelman, Maja; And Others

    Highlights of a panel discussion on advisory work and how it relates to teacher centers and inservice education programs are contained in this transcript. The role of an advisor in a teacher center is to act as a helper, counselor, confidant, and supportive professional to teachers who seek their services. An important function of the advisor is…

  17. Panel discussion on: trends in optical and radio data analysis

    International Nuclear Information System (INIS)

    Albrecht, R.

    1985-01-01

    The panel begins by placing optical and radio astronomy into the same category and then goes on to discuss a wide variety of hardware and software approaches which have been or can be utilized in the analysis of optical and radio data

  18. Predicted summary of panel discussion on smart instruments

    International Nuclear Information System (INIS)

    Sorber, R.E.

    1991-01-01

    The following is a hypothetical account of a panel discussion on Smart Instruments. It enumerates topics that are likely to covered in the actual discussion. A smart instrument may be defined as one that performs smart functions or as one that contains a computer of some sort. Neither definition is perfect. Smart functions might include, but are not limited to: automated data logging (reading, location, time); transfer (downloading) logged data to outside computer; computer assisted, remote calibration; linearity and dead time correction; performance trending; self diagnosis of faults; detector probe recognition; automated beta factor application; and automatic range selection. These smart functions are discussed

  19. Business challenges in the vendor community. Panel Discussion

    International Nuclear Information System (INIS)

    Stamm, Steve; Sauger, John; Marano, Mark; Shave, Dana; Pierce, Robert; Smiarowski, Michael W.

    2001-01-01

    Full text of publication follows: The nuclear business community is undergoing immense changes and challenges due to consolidation of the power industry and plant owners, shifts in the needs of plant owners, addition of new competitors, loss of old competitors, aging of the workforce, loss of personnel to competing industries, and the advances in electronic communications. These changes have significantly perturbed existing business models and relationships in the nuclear industry as well as the broader power, engineering, construction, equipment, and commodities fields. Vendors have responded to these challenges in a number of different ways. The participants for this panel have been selected from a diverse set of vendor organization types so that a broad spectrum of evaluation and approaches will be discussed. The participants in this panel discussion will provide insights into their views of the challenges to a successful nuclear business. They will provide insights into the expectations and approaches by each party in the client vendor relationship. Also discussed will be an overview of the strategies that each panelist views as potential success paths to nurture and grow the client-vendor relationship today with their insights into the future. (authors)

  20. Panel discussion: In vivo pet modeling and data analysis

    International Nuclear Information System (INIS)

    Koeppe, R.A.

    1991-01-01

    Following the first afternoon session on in vivo PET modeling and data analysis, a panel assembled to discuss in greater detail some of the issues pertinent to the kinetic analysis of PET data. The discussion was opened with a comment on some of the diofficulties of PET imaging in the study of neurotransmitter and receptor systems, including resolution limitations, image distortions, and levels of nonspecific binding. Dr. Hutchins reiterated that the imaging distortions predicted by his simulation studies include both open-quotes scaleclose quotes and open-quotes shape open-quotes distortions. Then the panel discussed the issue of registration of functional (PET) and anatomic (MRI or CT) images. The use of an anatomic image as a road map or guide to where one is in the physiologic PET image is a very important part of performing PET studies. It is at least as important to align a dynamic PET sequence internally, from frame to frame, as it is to align the PET study to an anatomic study. If a dynamic imaging procedure will take 30-90 min or more, a method is needed to assure that the patient has not moved substantially during the procedure or that the movement can be accounted for. Several possibilities were discussed. The next topic considered the issue of model complexity versus model reduction. If a model is too complex, it cannot provide accurate estimates of the model parameters due to the lack of identifiability of individual parameters. Modeling approaches such as simplifying the model to two parameters and changing the experimental protocol to provide more information so model simplification is not necessary were discussed on the basis of the tradeoff between procedural complexity and quality of information

  1. Panel discussion on rock mechanics issues in repository design

    International Nuclear Information System (INIS)

    Bieniawski, Z.T.; Kim, K.S.; Nataraja, M.

    1996-01-01

    The panel discussion was introduced by Mr. Z.T.(Richard) Bieniawski and then continued with five additional speakers. The topics covered in the discussion included rock mechanics pertaining to the design of underground facilities for the disposal of radioactive wastes and the safety of such facilities. The speakers included: Mr. Kun-Soo Kim who is a specialist in the area of rock mechanics testing during the Basalt Waste Isolation Project; Dr. Mysore Nataraja who is the senior project manager with the NRC; Dr. Michael Voegele who is the project manager for Science Applications International Corporation (SAIC) on the Yucca Mountain Project; Dr. Edward Cording who is a member of the Nuclear Waste Technical Review Board; and Dr. Hemendra Kalia who is employed by Los Alamos National Laboratory and coordinates various activities of testing programs at the Yucca Mountain Site

  2. The corporate practice of health care ... a panel discussion.

    Science.gov (United States)

    Calhoun, M J; Collins, M; Hasan, M; Klein, J I; Lundberg, G D; Mulligan, D H; Restuccia, R; Sapers, C M; Schram, R B; Woolhandler, S

    1996-06-01

    The pros and cons of treating health care as a profit-making business got a lively airing in Boston May 16, when the Harvard School of Public Health's "Second Conference on Strategic Alliances in the Evolving Health Care Market" presented what was billed as a "Socratic panel." The moderator was Charles R. Nesson, J.D., a Harvard Law School professor of 30 years' standing whose knack for guiding lively discussions is well known to viewers of such Public Broadcasting Service series as "The Constitution: That Delicate Balance. "As one panelist mentioned, Boston was an interesting place for this conversation. With a large and eminent medical establishment consisting mostly of traditionally not-for-profit institutions, the metropolis of the only state carried in 1972 by liberal Presidential candidate George McGovern is in one sense a skeptical holdout against the wave of aggressive investment capitalism that has been sweeping the health care industry since the 1994 failure of the Clinton health plan. In another sense, though, managed care-heavy Boston is an innovative crucible of change, just like its dominant HMO, the not-for-profit but merger-minded Harvard Pilgrim Health Care. Both of these facets of Beantown's health care psychology could be discerned in the comments heard during the panel discussion. With the permission of the Harvard School of Public Health--and asking due indulgence for the limitations of tape-recording technology in a room often buzzing with amateur comment--MANAGED CARE is pleased to present selections from the discussion in the hope that they will shed light on the business of health care.

  3. Enduring Nuclear Fuel Cycle, Proceedings of a panel discussion

    Energy Technology Data Exchange (ETDEWEB)

    Walter, C. E., LLNL

    1997-11-18

    The panel reviewed the complete nuclear fuel cycle in the context of alternate energy resources, energy need projections, effects on the environment, susceptibility of nuclear materials to theft, diversion, and weapon proliferation. We also looked at ethical considerations of energy use, as well as waste, and its effects. The scope of the review extended to the end of the next century with due regard for world populations beyond that period. The intent was to take a long- range view and to project, not forecast, the future based on ethical rationales, and to avoid, as often happens, long-range discussions that quickly zoom in on only the next few decades. A specific nuclear fuel cycle technology that could satisfy these considerations was described and can be applied globally.

  4. SU-B-213-07: Panel Discussion

    International Nuclear Information System (INIS)

    Starkschall, G.

    2015-01-01

    The North American medical physics community validates the education received by medical physicists and the clinical qualifications for medical physicists through accreditation of educational programs and certification of medical physicists. Medical physics educational programs (graduate education and residency education) are accredited by the Commission on Accreditation of Medical Physics Education Programs (CAMPEP), whereas medical physicists are certified by several organizations, the most familiar of which is the American Board of Radiology (ABR). In order for an educational program to become accredited or a medical physicist to become certified, the applicant must meet certain specified standards set by the appropriate organization. In this Symposium, representatives from both CAMPEP and the ABR will describe the process by which standards are established as well as the process by which qualifications of candidates for accreditation or certification are shown to be compliant with these standards. The Symposium will conclude with a panel discussion. Learning Objectives: Recognize the difference between accreditation of an educational program and certification of an individual Identify the two organizations primarily responsible for these tasks Describe the development of educational standards Describe the process by which examination questions are developed GS is Executive Secretary of CAMPEP

  5. Science Advisory Panel Meets to Discuss HLB/ACP

    Science.gov (United States)

    A group of scientists met in December 2013 as a Science Advisory Panel (SAP) to listen to presentations by the Citrus Research Board (CRB) and the California Department of Food and Agriculture (CDFA) and to respond to questions posed by CDFA personnel and the general public. The goal of the meeting ...

  6. Business challenges for the young generation. Panel Discussion

    International Nuclear Information System (INIS)

    Margolis, Robert; Shoop, Undine; Umstadter, Karl; Plies, Christina; Allen, Todd; Sackett, John; Klein, Dale; Gates, W. Gary; Simmons, Sonja

    2001-01-01

    This special panel session will capture the views of senior professionals on how to address the need to attract new talent to the nuclear profession. Young professionals will express their views on how to attract new talent to the nuclear profession. (authors)

  7. Electro-desalination of glazed tile panels - discussion of possibilities

    DEFF Research Database (Denmark)

    Dias-Ferreira, Célia; Ottosen, Lisbeth M.; Ribeiro, Alexandra B.

    2016-01-01

    . In the few experiments conducted on tiles with attached mortar, the mortar was desalinated to a higher degree than the biscuit and successful desalination of the biscuit through the mortar requires further research. In-situ pilot scale tests were performed on highly salt-contaminated walls without tiles...... by placing electrodes at the same side of the wall. Thus it may be possible to desalinate tile panels, without any physical damage of the fragile glaze, by placing electrodes on the back of the wall or by removing some tiles, placing electrodes in their spaces, and extracting the salts from there before...... the tiles are placed back again....

  8. Panel discussion on laboratory accelerator programs: present and future

    International Nuclear Information System (INIS)

    Richter, B.

    1986-09-01

    The present SLAC accelerator program is summarized briefly, and the future of electron-positron colliders is discussed. Present activities discussed include the PEP storage ring, the SPEAR storage ring, the Linear Accelerator, and the SLAC Linear Collider (SLC) project. Future prospects include a larger scale linear collider. The stability requirements on acceleration are briefly discussed

  9. Summary of contribution to the ICANS-X panel discussion

    International Nuclear Information System (INIS)

    Dolling, G.

    1989-01-01

    The author's role on this panel was to represent that group of users who wish to measure S(Q→,ω) at specified, pre-selected values of Q→ and ω. Until now this kind of measurement has always been reasonably easy to do with a triple axis crystal spectrometer (TACS) at a continuous source of neutrons, and rather more difficult to do with a time-of-flight (TOF) machine at a pulsed source. Only those physicists who were extraordinarily hard-working and persistent managed to get any useful specific s(Q,ω) data, using TOF methods. The lazy physicist simply emigrated to a place where triple axis spectrometers were located, or where he could build new ones. It has not so far been feasible to use a conventional TACS at a pulsed neutron source because there is insufficient time-averaged intensity. The pulsed source user is obliged to use TOF methods, so naturally there has been much effort devoted to making it possible to do specific (Q,ω) measurements with a TOF spectrometer. One of the better examples along these lines if right here at Los Alamos-the Constant Q Spectrometer; PRISMA at ISIS is another excellent example. There are, however, significant limitations to the flexibility of these instruments. It seems likely that they will not be capable of supplanting the conventional TACS for a substantial body of fundamental research work

  10. Summary of contribution to the ICANS-X panel discussion

    International Nuclear Information System (INIS)

    Bowman, C.D.

    1989-01-01

    In this paper the author discusses spallation source development in general. He discusses the future relationship between spallation sources and emphasizes that each laboratory is unique and that all laboratories lose by pushing toward some norm rather than by taking advantage of each labs individuality. He illustrates this by some remarks about the challenge to Los Alamos from other spallation sources and by suggesting a response

  11. Panel discussion on the future of particle physics

    CERN Multimedia

    Perkins, Donald Hill; Veltman, Martinus J G; Okun, Lev Borisovich; Aymar, Robert; Weinberg, Steven; Darriulat, Pierre; Glashow, Sheldon Lee; van der Meer, S; Gianotti, F; Antoniadis, Ignatios; Schopper, Herwig Franz; Llewellyn Smith, Christopher Hubert; Telegdi, Valentine Louis; Bellettini, Giorgio; Soergel, Volker

    2004-01-01

    The projects that are to be undertaken by CERN in future are discussed in this paper. The discovery of Higgs at LHC and R&D at CLIC are reported. The introduction of Higgs bosons gave rise to new problems such as mass hierarchy and electroweak symmetry breaking. Solutions to the above problems using physics beyond standard model are also reported in this paper. The paper also discusses about the long-time scale associated to the projects.

  12. Panel discussion on exploitation of geothermal resources in thermal zones

    Energy Technology Data Exchange (ETDEWEB)

    Viramonte, J G; Mange, J; Stefani, G

    1978-03-01

    The topics discussed include the major known geothermal resources, varying ways of exploiting geothermal resources, technical and economic difficulties in the exploitation, the place of geothermal energy in the total energy policy of a given country, advanced exploration techniques, and indications of needed areas of study. The panelists represented most of the South American countries, Mexico, and Italy. (JSR)

  13. Panel discussion : signals for capital investment : systems for assessing performance

    International Nuclear Information System (INIS)

    Shalaby, A.; Van Beers, R.; Keizer, C.; Taylor, R.; Rothstein, S.

    2003-01-01

    This session presented highlights of 5 panelists who discussed signals for capital investment in Ontario's newly opened electricity market. Four main issues were highlighted. The panelists emphasized that the industry does not want a market where the price is managed by anyone. They don't want government interference, which will undermine the market's integrity. In addition, the industry wants a market that reflects scarcity, as well as a transparent market, where all the necessary information is available to all players. It was noted that at the moment, green power is not the priority. Rather, emphasis should be placed on reliability, transmission planning, inter-regional coordination, and joint investments with neighbouring jurisdictions. figs

  14. Panel discussion: mandatory environmental and medical monitoring, essential

    International Nuclear Information System (INIS)

    Porter, W.E.

    1978-09-01

    Biologic measurements can furnish two kinds of information: measure of the individual worker's overall exposure; and measure of the worker's individual and characteristic response. Measurement of exposure may be made by: determining in blood, urine, hair, nails, other body fluids, and body tissues, the amount of substance to which the worker was exposed; by determining the amount of metabolite(s) of the substance in tissues and fluids; and by determining the amount of the substance in the exhaled breath. Measurements of response give an estimate of the physiologic status of the worker and may measure: changes in amount of some critical biochemical constituent; changes in activity of a critical enzyme; and changes in some physiologic function. Two schools of thought regarding biologic limit values or biological threshold limit values for hazardous materials are discussed

  15. Near-barrier heavy-ion fusion (panel discussion)

    International Nuclear Information System (INIS)

    Vandenbosch, R.

    1991-01-01

    We are approaching a semi-quantitative understanding of the role of the coupling of shape and transfer degrees of freedom in the enhancement of near and sub-barrier fusion cross sections, although there remains some debate about the relative importance of the different degrees of freedom. The information content in fusion excitation functions is limited and it is therefore important to obtain additional information such as higher moments of the partial wave distribution. The present status of information obtained with difference probes will be critically discussed. Among the open problems in sub-barrier fusion is the importance of a neck degree of freedom and a concomitant departure of the inertial mass from the reduced mass. A coupled channels description in terms of the asymptotic exit channels may only converge slowly. (author)

  16. SU-A-210-03: Panel Discussion

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, A. [Duke University Medical Center (United States)

    2015-06-15

    The purpose of this student annual meeting is to address topics that are becoming more relevant to medical physicists, but are not frequently addressed, especially for students and trainees just entering the field. The talk is divided into two parts: medical billing and regulations. Hsinshun Wu – Why should we learn radiation oncology billing? Many medical physicists do not like to be involved with medical billing or coding during their career. They believe billing is not their responsibility and sometimes they even refuse to participate in the billing process if given the chance. This presentation will talk about a physicist’s long career and share his own experience that knowing medical billing is not only important and necessary for every young medical physicist, but that good billing knowledge could provide a valuable contribution to his/her medical physics development. Learning Objectives: The audience will learn the basic definition of Current Procedural Terminology (CPT) codes performed in a Radiation Oncology Department. Understand the differences between hospital coding and physician-based or freestanding coding. Apply proper CPT coding for each Radiation Oncology procedure. Each procedure with its specific CPT code will be discussed in detail. The talk will focus on the process of care and use of actual workflow to understand each CPT code. Example coding of a typical Radiation Oncology procedure. Special procedure coding such as brachytherapy, proton therapy, radiosurgery, and SBRT. Maryann Abogunde – Medical physics opportunities at the Nuclear Regulatory Commission (NRC) The NRC’s responsibilities include the regulation of medical uses of byproduct (radioactive) materials and oversight of medical use end-users (licensees) through a combination of regulatory requirements, licensing, safety oversight including inspection and enforcement, operational experience evaluation, and regulatory support activities. This presentation will explore the

  17. SU-A-210-04: Panel Discussion

    Energy Technology Data Exchange (ETDEWEB)

    Stanford, J. [University of Mississippi Med. Center (United States)

    2015-06-15

    The purpose of this student annual meeting is to address topics that are becoming more relevant to medical physicists, but are not frequently addressed, especially for students and trainees just entering the field. The talk is divided into two parts: medical billing and regulations. Hsinshun Wu – Why should we learn radiation oncology billing? Many medical physicists do not like to be involved with medical billing or coding during their career. They believe billing is not their responsibility and sometimes they even refuse to participate in the billing process if given the chance. This presentation will talk about a physicist’s long career and share his own experience that knowing medical billing is not only important and necessary for every young medical physicist, but that good billing knowledge could provide a valuable contribution to his/her medical physics development. Learning Objectives: The audience will learn the basic definition of Current Procedural Terminology (CPT) codes performed in a Radiation Oncology Department. Understand the differences between hospital coding and physician-based or freestanding coding. Apply proper CPT coding for each Radiation Oncology procedure. Each procedure with its specific CPT code will be discussed in detail. The talk will focus on the process of care and use of actual workflow to understand each CPT code. Example coding of a typical Radiation Oncology procedure. Special procedure coding such as brachytherapy, proton therapy, radiosurgery, and SBRT. Maryann Abogunde – Medical physics opportunities at the Nuclear Regulatory Commission (NRC) The NRC’s responsibilities include the regulation of medical uses of byproduct (radioactive) materials and oversight of medical use end-users (licensees) through a combination of regulatory requirements, licensing, safety oversight including inspection and enforcement, operational experience evaluation, and regulatory support activities. This presentation will explore the

  18. SU-A-210-04: Panel Discussion

    International Nuclear Information System (INIS)

    Stanford, J.

    2015-01-01

    The purpose of this student annual meeting is to address topics that are becoming more relevant to medical physicists, but are not frequently addressed, especially for students and trainees just entering the field. The talk is divided into two parts: medical billing and regulations. Hsinshun Wu – Why should we learn radiation oncology billing? Many medical physicists do not like to be involved with medical billing or coding during their career. They believe billing is not their responsibility and sometimes they even refuse to participate in the billing process if given the chance. This presentation will talk about a physicist’s long career and share his own experience that knowing medical billing is not only important and necessary for every young medical physicist, but that good billing knowledge could provide a valuable contribution to his/her medical physics development. Learning Objectives: The audience will learn the basic definition of Current Procedural Terminology (CPT) codes performed in a Radiation Oncology Department. Understand the differences between hospital coding and physician-based or freestanding coding. Apply proper CPT coding for each Radiation Oncology procedure. Each procedure with its specific CPT code will be discussed in detail. The talk will focus on the process of care and use of actual workflow to understand each CPT code. Example coding of a typical Radiation Oncology procedure. Special procedure coding such as brachytherapy, proton therapy, radiosurgery, and SBRT. Maryann Abogunde – Medical physics opportunities at the Nuclear Regulatory Commission (NRC) The NRC’s responsibilities include the regulation of medical uses of byproduct (radioactive) materials and oversight of medical use end-users (licensees) through a combination of regulatory requirements, licensing, safety oversight including inspection and enforcement, operational experience evaluation, and regulatory support activities. This presentation will explore the

  19. SU-A-210-03: Panel Discussion

    International Nuclear Information System (INIS)

    Rodrigues, A.

    2015-01-01

    The purpose of this student annual meeting is to address topics that are becoming more relevant to medical physicists, but are not frequently addressed, especially for students and trainees just entering the field. The talk is divided into two parts: medical billing and regulations. Hsinshun Wu – Why should we learn radiation oncology billing? Many medical physicists do not like to be involved with medical billing or coding during their career. They believe billing is not their responsibility and sometimes they even refuse to participate in the billing process if given the chance. This presentation will talk about a physicist’s long career and share his own experience that knowing medical billing is not only important and necessary for every young medical physicist, but that good billing knowledge could provide a valuable contribution to his/her medical physics development. Learning Objectives: The audience will learn the basic definition of Current Procedural Terminology (CPT) codes performed in a Radiation Oncology Department. Understand the differences between hospital coding and physician-based or freestanding coding. Apply proper CPT coding for each Radiation Oncology procedure. Each procedure with its specific CPT code will be discussed in detail. The talk will focus on the process of care and use of actual workflow to understand each CPT code. Example coding of a typical Radiation Oncology procedure. Special procedure coding such as brachytherapy, proton therapy, radiosurgery, and SBRT. Maryann Abogunde – Medical physics opportunities at the Nuclear Regulatory Commission (NRC) The NRC’s responsibilities include the regulation of medical uses of byproduct (radioactive) materials and oversight of medical use end-users (licensees) through a combination of regulatory requirements, licensing, safety oversight including inspection and enforcement, operational experience evaluation, and regulatory support activities. This presentation will explore the

  20. Panel discussion on near-field coupled processes with emphasis on performance assessment

    International Nuclear Information System (INIS)

    Codell, R.B.; Baca, R.G.; Ahola, M.P.

    1996-01-01

    The presentations in this panel discussion involve the general topic of near-field coupled processes and postclosure performance assessment with an emphasis on rock mechanics. The potential impact of near-field rock mass deformation on repository performance was discussed, as well as topics including long term excavation deterioration, the performance of geologic seals, and coupled processes concerning rock mechanics in performance assessments

  1. Highlights from panel discussion on key issues for future developments in microwave processing

    International Nuclear Information System (INIS)

    Gac, F.D.; Iskander, M.F.

    1992-01-01

    This paper reports on highlights from a panel discussion on Key Issues for Future Development in Microwave Processing. Although the panelists represented a mix of individuals from government, academia, and industry, only one aspect of industry was represented, namely microwave system manufacturers. For further panel discussions, it is recommended that the materials manufacturing (i.e., microwave user) sector also be represented. Three important points emerged from the panel discussion. The first deals with the credibility and usability of information, be it dielectric property measurements, experimental procedures, or microwave processing results. Second, a considerable communication and education gap continues to exist between the materials community and microwave engineers. Finally, a more realistic approach should be taken in identifying where microwave processing makes sense

  2. Curriculum Reform in 3D: A Panel of Experts Discuss the New HPE Curriculum in Australia

    Science.gov (United States)

    Hickey, Chris; Kirk, David; Macdonald, Doune; Penney, Dawn

    2014-01-01

    This paper was developed at the request of the Organising Committee for the 27th Australian Council for Health, Physical Education and Recreation International Conference, in Melbourne, 2013. Its genesis was as a feature forum, wherein a panel of curriculum experts were bought together to discuss the emergence of the Australian Health and Physical…

  3. Panel discussion: Which severe accident chemistry topics most deserve further research?

    International Nuclear Information System (INIS)

    Bergeron, K.D.

    1988-01-01

    A severe accident would involve so many species and chemical environments within the plant that detailed description of all the chemical reactions and chemistry-related processes is currently not practical or even possible. Thus it is necessary to select for consideration those phenomena which might be most important. The panel will discuss which severe accident chemistry topics most deserve further research

  4. Panel discussion on: Data analysis trends in X-ray and γ-ray astronomy

    International Nuclear Information System (INIS)

    Ozel, M.F.; Buccheri, R.; Scarsi, L.

    1985-01-01

    This article is a panel discussion that included several participants. The problems of data analysis in x- and gamma-ray astronomy are discussed. Improvements achieved by consecutive gamma-ray experiments since the 1960's are reviewed. The presentation of gamma-ray data in terms of two-dimensional sky maps is examined and different representations of galactic anticenter gamma-ray sky are shown

  5. Panel Discussion : Report of the APS Ad-Hoc Committee on LGBT Issues

    Science.gov (United States)

    Atherton, Tim; Barthelemy, Ramon; Garmon, Savannah; Reeves, Kyle; APS Ad-Hoc Committee on LGBT Issues Team

    Following the presentation of the findings and recommendations of the APS Ad-Hoc Committee on LGBT Issues (C-LGBT) by Committee Chair Michael Falk, a panel discussion will be held featuring several members of the committee. The discussion will focus on how APS can best ensure the recommendations of the committee are carried out in a timely fashion and other ideas on future APS efforts toward LGBT inclusion in physics. Discussion topics will also include the research and other input that shaped the committee's findings and recommendations.

  6. Current Topics and Trends in Military Dental Research: A Tri-Service Panel Discussion

    Science.gov (United States)

    2016-05-09

    Tri- Service Panel Discussion presented at/published to SURF 2016 (San Antonio Military Health System & Universities Research Forum), UT San Antonio...meting.) SURF 2016 (San Antonio Mili tary Health System & U niversities Research Forum), UT San Antonio, TX; 20 May 2016 D 11e. OTHER (Describe...if you are a Graduate Health Sciences Education student and your department has told you they cannot fund your publication, the 59th Clinical Research

  7. Fluorescent lamp and ballast disposal-efficiency and the environment: Panel discussion

    Energy Technology Data Exchange (ETDEWEB)

    Bleasby, P.

    1996-01-01

    This panel discussion looked at the present state of problems related to the disposal of fluorescent lamps and ballasts. EPA has not issued a ruling defining what is to be done, and as a result different areas of the country, and different users are treating the products differently. The authors review the history of the problem, where the environmental concerns are, possible alternatives for disposal, be it landfill, recycling, incineration, or treatment as hazardous wastes, and policy concerns with regard to this issue.

  8. Discussion: some new findings from surface subsidence monitoring over longwall panels

    International Nuclear Information System (INIS)

    Luo, Y.; Peng, S.S.; Arioglu, E.

    1992-01-01

    The article consists of a discussion of the paper, 'some new findings from surface subsidence monitoring over longwall panels' and a reply by the paper's authors, Luo and Peng. The reviewer, Arioglu, regards the paper favourably but suggests that surface subsidence can be represented by an exponential expression, and that there is a regression equation linking possible subsidence, pillar loading and the height-to-width ratio of the pillars left. Luo and Peng reply with their reasons for preferring their original linear regression model to the non-linear models suggested by Arioglu. 4 figs

  9. Gender-specific Regulatory Challenges to Product Approval: a panel discussion.

    Science.gov (United States)

    McGregor, Alyson J; Barr, Helen; Greenberg, Marna R; Safdar, Basmah; Wildgoose, Peter; Wright, David W; Hollander, Judd E

    2014-12-01

    On May 13, 2014, a 1-hour panel discussion session titled "Gender-specific Regulatory Challenges to Product Approval" was held during the Academic Emergency Medicine consensus conference, "Gender-specific Research in Emergency Medicine: Investigate, Understand, and Translate How Gender Affects Patient Outcomes." The session sought to bring together leaders in emergency medicine (EM) research, authors, and reviewers in EM research publications, as well as faculty, fellows, residents, and students engaged in research and clinical practice. A panel was convened involving a representative from the Office of Women's Health of the U.S. Food and Drug Administration, two pharmaceutical executives, and a clinical EM researcher. The moderated discussion also involved audience members who contributed significantly to the dialogue. Historical background leading up to the session along with the main themes of the discussion are reproduced in this article. These revolve around sex- and gender-specific research, statistical analysis of sex and gender, clinical practice, financial costs associated with pharmaceutical development, adaptive design, and specific recommendations on the regulatory process as it affects the specialty of EM. © 2014 by the Society for Academic Emergency Medicine.

  10. Which model of truth and reconciliation applies to former Yugoslavia?: Some thoughts on the closing panel discussion

    Directory of Open Access Journals (Sweden)

    Tošić Jelena

    2002-01-01

    Full Text Available This paper represents a reflection on the final panel discussion of the conference "Which Model of Truth and Reconciliation applies to ex-Yugoslavia?". By the means of sequential and hierarchical analysis of the argumentative structure of the discussion, the author «extracts» key dimensions of the expert discourse on truth and reconciliation using the case of the mentioned panel discussion. By identifying the points of consensus the author seeks to describe the notion of truth and reconciliation as it emerged in the closing panel discussion of the conference.

  11. Panel discussion: Building Canadian companies and capabilities in the transition to the hydrogen economy

    International Nuclear Information System (INIS)

    Beck, N.

    2004-01-01

    'Full text:' Moderated by Nick Beck from Natural Resources Canada, this panel discussion will be prefaced by a keynote address by Dr. Arthur Carty, Canada's National Science Advisor and former President of the National Research Council of Canada, who will discuss technology commercialization in Canada and how the Government of Canada and industry collaborate to achieve their respective priorities. This session will illustrate innovative government and industry partnerships from early research and development to project demonstration, and adoption into the market-place. Panelists from across the Canadian hydrogen and fuel cell innovation spectrum will provide an overview of their respective company's partnerships with the Government of Canada and speak to how these alliances have helped their company to pioneer new technology, move technology from the lab to the marketplace, and/or become more competitive. Opportunities and challenges that companies have faced in their partnerships with government will be shared with the audience. The Panel Members are: Mr. Stephen Kukucha, Mr. Chris Reid, Mr. Robb Thompson, Mr. Pierre Rivard, Mr. John Shen, Mr. R. Randall MacEwen, Mr. Jonathan Wilkinson. Companies will also be showcasing their contribution in advancing Canada's and the world's transition to the hydrogen economy. (author)

  12. Summary of human social, cultural, behavioral (HSCB) modeling for information fusion panel discussion

    Science.gov (United States)

    Blasch, Erik; Salerno, John; Kadar, Ivan; Yang, Shanchieh J.; Fenstermacher, Laurie; Endsley, Mica; Grewe, Lynne

    2013-05-01

    During the SPIE 2012 conference, panelists convened to discuss "Real world issues and challenges in Human Social/Cultural/Behavioral modeling with Applications to Information Fusion." Each panelist presented their current trends and issues. The panel had agreement on advanced situation modeling, working with users for situation awareness and sense-making, and HSCB context modeling in focusing research activities. Each panelist added different perspectives based on the domain of interest such as physical, cyber, and social attacks from which estimates and projections can be forecasted. Also, additional techniques were addressed such as interest graphs, network modeling, and variable length Markov Models. This paper summarizes the panelists discussions to highlight the common themes and the related contrasting approaches to the domains in which HSCB applies to information fusion applications.

  13. MO-E-BRB-00: PANEL DISCUSSION: SBRT/SRS Case Studies - Lung

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-06-15

    In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms of (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.

  14. Panel Discussion: Near Real Time Imagery Intelligence How Will We Do It?

    Science.gov (United States)

    Andraitis, Arthur A.; Crane, Alfred C.; Daniels, George; Graham, Johnny; LaGesse, Francis R.

    1987-02-01

    This afternoon's panel discussion will address near real time imagery and intelligence--how will we do it? Our moderator is Arthur Andraitis, a consultant in intelligence reconnaissance systems and international marketing. He was commissioned in the United States Air Force out of the University of Idaho, and entered the Air Force in 1955 where he became an Image Intelligence Officer serving in a variety of intelligence and reconnaisance related assignments, including two tours each in Asia and Europe supporting tactical theater and national level operations. He also suffered through two Pentagon tours--one as Branch Chief of the Imagery Branch for the Assistant Chief of Staff for Intelligence. He was the U. S. National Coordinator for two NATO intelligence and reconnaissance panels, and served several assignments in support of special operations, which included a year with the special forces in Viet Nam where he flew many missions in L-19s, 01 and assault helicopters. He has been an advisor on intelligence and reconnaissance matters to several foreign countries. In 1978 he retired from the United States Air Force, went to work for Itek, and then became an independent consultant in intelligence and reconaissance systems. I would like to introduce Art Andraitis.

  15. Panel discussion on 'Government and industry social responsibility towards potential communities hosting radioactive waste management sites'

    International Nuclear Information System (INIS)

    Cragg, W.; Storey, K.; Cooper, H.; McIntyre, J.; Brown, P.

    2006-01-01

    'Full text:' In healthy democracies, support from local communities for industrial/development projects is highly desirable. What are the respective roles of the various stakeholder sectors, i.e. governments, industry, and communities around industrial projects, including waste management facilities, and how can they interact with sustainable development in mind? Should the private sector be involved in public policy? Should the public sector have an active role in providing funding complementing the notion of the Polluter pays principle? Should communities have a greater role in overseeing the activities of industry and be enabled to do so? Should communities be empowered to increase their role in decision-making processes? Are there trends emerging in this area? Are there improvements to be made? The Not-in-My-Backyard (NIMBY) reflex is not e thical . Thoughtful review is required when considering the right or the desirability to develop. Each of the invited panel members will briefly approach this issue from the perspective of their respective sector. A discussion period will ensue which hopefully will provide insight into how diverse sectors can work together to ensure the establishment of radioactive waste management facilities in communities which support such projects based on local and national values. (author)

  16. TU-A-BRB-00: PANEL DISCUSSION: SBRT/SRS Case Studies - Brain and Spine

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-06-15

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

  17. Panel discussion: Roles of space program in the Asia Pacific region

    Science.gov (United States)

    Nomura, Tamiya

    1992-03-01

    A panel discussion on the subject 'Roles played by space development in Asia Pacific region' was held chaired by Space Activities Commission member and attended by the representatives of the participating countries, special attendance and observers. Opinions were expressed by each representative on three subjects, that is, social effects and benefits obtained by remote sensing data, observation data desired to augment the effect, and expectation for developed countries in space development. President of NASDA (National Space Development Agency of Japan) expressed his intension to promote international cooperation for the Japanese Earth Resources Satellite-1 (JERS-1) verification program, utilization augmentation of Japanese earth observing satellites and human resource training and education. Deputy Director-General for Science and Technology Agency (STA) outlined ASCA (Association for Science Cooperation in Asia) seminar and STA fellowship in relation to human resource development. Chairman of the Japan International Space Year (ISY) Association cited the necessity of closer and extensive communication networks free from the existing commercial communication. Deputy-Minister for Posts and Telecommunications outlined the PARTNERS project (Post-operational utilization of the Engineering Test Satellite-5 (ETS-5)) for international cooperation in space activities in Asia Pacific region. President of the Institute of Space and Astronautical Science (ISAS) outlined Japan's present status of and international cooperation in space science.

  18. TU-A-BRB-00: PANEL DISCUSSION: SBRT/SRS Case Studies - Brain and Spine

    International Nuclear Information System (INIS)

    2016-01-01

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

  19. A retrospective analysis of the effect of discussion in teleconference and face-to-face scientific peer-review panels

    Science.gov (United States)

    Carpenter, Afton S; Sullivan, Joanne H; Deshmukh, Arati; Glisson, Scott R; Gallo, Stephen A

    2015-01-01

    Objective With the use of teleconferencing for grant peer-review panels increasing, further studies are necessary to determine the efficacy of the teleconference setting compared to the traditional onsite/face-to-face setting. The objective of this analysis was to examine the effects of discussion, namely changes in application scoring premeeting and postdiscussion, in these settings. We also investigated other parameters, including the magnitude of score shifts and application discussion time in face-to-face and teleconference review settings. Design The investigation involved a retrospective, quantitative analysis of premeeting and postdiscussion scores and discussion times for teleconference and face-to-face review panels. The analysis included 260 and 212 application score data points and 212 and 171 discussion time data points for the face-to-face and teleconference settings, respectively. Results The effect of discussion was found to be small, on average, in both settings. However, discussion was found to be important for at least 10% of applications, regardless of setting, with these applications moving over a potential funding line in either direction (fundable to unfundable or vice versa). Small differences were uncovered relating to the effect of discussion between settings, including a decrease in the magnitude of the effect in the teleconference panels as compared to face-to-face. Discussion time (despite teleconferences having shorter discussions) was observed to have little influence on the magnitude of the effect of discussion. Additionally, panel discussion was found to often result in a poorer score (as opposed to an improvement) when compared to reviewer premeeting scores. This was true regardless of setting or assigned reviewer type (primary or secondary reviewer). Conclusions Subtle differences were observed between settings, potentially due to reduced engagement in teleconferences. Overall, further research is required on the psychology of

  20. Potential environmental hazards of photovoltaic panel disposal: Discussion of Tammaro et al. (2015).

    Science.gov (United States)

    Sinha, Parikhit

    2017-02-05

    In their recent publication in Journal of Hazardous Materials (http://dx.doi.org/10.1016/j.jhazmat.2015.12.018), Tammaro et al. evaluate the potential environmental impacts of an illegal disposal scenario of photovoltaic panels in the European Union. Critical assumptions that underlie the study's conclusions would benefit from clarification. A scenario of photovoltaic panels finely crushed and abandoned in nature is not supported with field breakage data, in which photovoltaic panels remain largely intact with a number of glass fractures or cracks, as opposed to breakage into cm-scale pieces. Fate and transport analysis is necessary to evaluate how leachate transforms and disperses in moving from the point of emissions to the point of exposure, prior to making comparisons with drinking water limits. Some hazardous metal content has declined in both crystalline silicon and thin film panels, including a 50% decline in semiconductor material intensity in CdTe thin film panels (g CdTe/W) from 2009 to 2015. Waste laws, recycling requirements and minimum treatment standards under the EU WEEE Directive, and illegal disposal rates affect the accuracy of forecasts of releasable metal amounts from PV panels in Europe through 2050. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Keeping the lights on: CEA Panel Discussion: Year 2000 and its implications for utilities

    Energy Technology Data Exchange (ETDEWEB)

    Steeves, G. M. [TransAlta Corporation, Edmonton, AB (Canada)

    1999-10-01

    The Y2K problem as it affects electrical utilities was the topic of a panel discussion, emphasizing the approach taken by TransAlta Corporation to ensure that the lights will remain on at midnight on January 1, 2000. The TransAlta approach to prepare for the Year 2000 is based on the federal government`s `Report of the Task Force Year 2000, A Call for Action` and includes as key elements (1) the inventory, (2) assessment, (3) conversion and replacement, (4) key partner preparedness, and (5) contingency plans. TransAlta is also part of the Electric Power Research Institute`s Year 2000 Program and has received quality testing information from other member organizations, as well as contributed to the overall knowledge pool by posting its inventories, testing approaches and results on the EPRI web site, and by participating at EPRI conferences. TransAlta is also interconnected with other electric utilities that make up the Alberta Interconnected System which operates on a one-system basis, addressing all relevant issues collectively. The Alberta System in turn is part of the western grid through BC Hydro and they have jointly addressed interconnection facilities and conducted walk-throughs at all sites where two or more organizations have equipment installed. The contingency plan is built on the following principles: (1) advance and stagger the dates at generation plans and SCADA systems, (2) develop load scenarios, (3) configure the power system to maximize flexibility, (4) man all critical sites, (5) install redundant communication systems at critical sites, and (6) coordinate with existing emergency plans. The general assessment is that these collective actions will result in minimal disruptions to electric service, and that the contingency plans are sufficiently flexible and thorough to respond to any unforeseen events.

  2. Introduction statement at the panel discussion [contributed by H. Reijonen, IAEA

    International Nuclear Information System (INIS)

    Reijonen, H.

    1993-01-01

    Full text: Introduction at the Panel discussion: I'm really not prepared to make any policy statements at this stage because the multi-lateral-informational exercises on this topic are still taking their form. I may just briefly mention what the Agency has been doing on this topic during the last six months or so. Last May we had an advisory group meeting in Vienna with a topic 'Research Reactor Renewal and Upgrading Program', but did not consider only fuel cycle questions but also other matters of interest. The outcome of this meeting will be submitted to the International Nuclear Fuel Cycle Evaluation Working Group. We have just published the proceedings of this meeting which is the 'Agency Technical Document, No. 214'. This is a cost-free publication that we can send to any one of you who wishes to have it and the secretaries at the Information Desk have an order list so during the break if you just please write down your name and address we shall then send the document to you. Some sort of continuation to that meeting and also a continuation to the discussion that we have had here yesterday and today, we are planning to have a consultant's meeting in preparation of the program on research reactor core conversions to use low enriched uranium instead of highly enriched uranium. This exercise has been coordinated with INFCE and it is not the intention that work would be duplicating each other but rather all meeting at the end of November, early December, is something that we would like to look at concrete cases i mainly developing countries that are currently utilizing highly enriched uranium so that we would like to make some sort of a check list or technical evaluation of what must be done in certain country cases to prepare core conversions that would utilize the new fuel designs that have been discussed here yesterday and today. We also hope that during the meeting in about three weeks, we could discuss some demonstration projects or programs that could take

  3. Brain oscillations as biomarkers in neuropsychiatric disorders: following an interactive panel discussion and synopsis.

    Science.gov (United States)

    Yener, Görsev G; Başar, Erol

    2013-01-01

    This survey covers the potential use of neurophysiological changes as a biomarker in four neuropsychiatric diseases (attention deficit hyperactivity disorder (ADHD), Alzheimer's disease (AD), bipolar disorder (BD), and schizophrenia (SZ)). Great developments have been made in the search of biomarkers in these disorders, especially in AD. Nevertheless, there is a tremendous need to develop an efficient, low-cost, potentially portable, non-invasive biomarker in the diagnosis, course, or treatment of the above-mentioned disorders. Electrophysiological methods would provide a tool that would reflect functional brain dynamic changes within milliseconds and also may be used as an ensemble of biomarkers that is greatly needed in the evaluation of cognitive changes seen in these disorders. The strategies for measuring cognitive changes include spontaneous electroencephalography (EEG), sensory evoked oscillation (SEO), and event-related oscillations (ERO). Further selective connectivity deficit in sensory or cognitive networks is reflected by coherence measurements. Possible candidate biomarkers discussed in an interactive panel can be summarized as follows: for ADHD: (a) elevation of delta and theta, (b) diminished alpha and beta responses in spontaneous EEG; for SZ: (a) decrease of ERO gamma responses, (b) decreased ERO in all other frequency ranges, (c) invariant ERO gamma response in relation to working memory demand; for euthymic BD: (a) decreased event-related gamma coherence, (b) decreased alpha in ERO and in spontaneous EEG; for manic BD: (a) lower alpha and higher beta in ERO, (b) decreased event-related gamma coherence, (c) lower alpha and beta in ERO after valproate; and for AD: (a) decreased alpha and beta, and increased theta and delta in spontaneous EEG, (b) hyperexcitability of motor cortices as shown by transcortical magnetic stimulation, (c) hyperexcitability of visual sensory cortex as indicated by increased SEO theta responses, (d) lower delta ERO, (e

  4. Discussion

    International Nuclear Information System (INIS)

    Sutcliffe, W.G.

    1991-01-01

    This is an edited transcript of the recorded discussions that followed the presentation of each paper and on the general comments at the conclusion of the session. No attempt was made to identity those who offered comments or asked questions

  5. new developments for control room habitability evaluation and analysis. Panel Discussion

    International Nuclear Information System (INIS)

    Cozens, Kurt O.; Harvey, Robert B. Jr.; Hayes, John J. Jr.; Jarosz, Gregory; Lagus, Peter L.; Taplett, Kenneth J.; Schultz, Stephen P.

    2001-01-01

    In 2000, the Nuclear Energy Institute (NEI), nuclear utilities, and the U.S. Nuclear Regulatory Commission (NRC) embarked on a series of working meetings designed to develop means to assess the post-accident performance of control room ventilation systems to ensure required control room habitability (CRH). Through monthly meeting interactions beginning in January 2000, teams from the industry and the NRC have been working to develop an industry approach for assessment of existing systems. New system evaluation techniques are being developed that will allow for evaluation and/or identification of potential performance improvement options. NRC review of the documentation of this approach, as well as broad industry comment, was performed in the first part of 2001. This session will examine technical development topics covering licensing, analysis, testing, and control room refurbishment. NRC, NEI, utility, vendor, and consultant presentations will be followed by a panel session that will explore both process and technical recommendations for improvements. Since the mid-1980's, the NRC has communicated concerns on the inadequacies of control room designs relating to CRH requirements. In the mid-1990's, testing of some control room envelopes indicated that key assumptions supporting the radiological dose analysis might be incorrect. In 1998, the NRC held a public workshop to address CRH concerns. In late 1999, the NRC and the industry agreed to work together on issues affecting CRH and develop the NEI 99-03 guidance document for resolving those issues. This NEI 99-03 industry document defines a process for licensees to assess a plant's design and licensing bases for CRH to ensure that they are established and maintained throughout the life of the plant. The assessment process describes a comparative approach to determine if the plant configuration and operation are consistent with the CRH licensing basis and analysis. The process includes evaluation, testing, and

  6. progress on the U.S.-Russian excess weapons plutonium disposition program. Panel discussion

    International Nuclear Information System (INIS)

    Feinroth, Herb; Sicard, Bruno; Kudryavtsev, Evgeny; Sprankle, Kenneth A.; Nesbit, Steve; Gadsby, Robert; Aratani, Kiyonori

    2001-01-01

    Full text of publication follows: On September 1, 2000, the United States and Russia signed a historic agreement to each dispose of 34 tons of excess weapons plutonium by 2025, or sooner if possible. The agreement was conditional on international financing of the Russian program. The parties are now attempting to establish a specific program for disposition of the Russian plutonium and to secure commitments for international financing of the Russian program. In the United States, efforts are moving forward to design, license, and construct the necessary facilities for its disposition program. With the assistance of France and Germany, efforts are moving forward in Russia to plan and design appropriate reactor modifications as well as the needed facilities for plutonium conversion and mixed-oxide fabrication. Japan and Canada are also participants in the Russian disposition program. This panel session will review the status of actions taken to bring this agreement to fruition. (authors)

  7. Panel discussion: Future directions in magnetic fusion--comments of John Sheffield, Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Sheffield, J.

    1992-01-01

    I will discuss two important issues for the US magnetic fusion program: the role of alternate magnetic configurations to the tokamak, and factors which need to be considered in planning the evolution of the US program

  8. Coordinating ecological risk assessment with natural resource damage assessment: A panel discussion.

    Science.gov (United States)

    Sanders, Brenda; Ammann, Mike; Hoff, Rebecca; Huston, Mark; Jenkins, Kenneth; Palagyi, Tony; Pelto, Karen; Rettig, Todd; Wagner, Anne

    2016-10-01

    Contaminated sites in the United States undergo remediation and restoration through regulatory programs that lead the 2 processes through independent but often parallel pathways with different objectives. The objective of remediation is to reduce risk to human health and the environment, whereas that of restoration is to restore injured resources and compensate the public for lost use of the services that natural resources provide. More complex sites, such as those associated with large river systems and urban waterways, have resulted in increasingly larger-scale ecological risk assessments (ERAs) and natural resource damage assessments (NRDAs) that take many years and involve diverse practitioners including scientists, economists, and engineers. Substantial levels of effort are now frequently required, creating a need for more efficient and cost-effective approaches to data collection, analyses, and assessments. Because there are commonalities in the data needs between ERAs and NRDAs, coordination of the design and implementation of site-specific studies that meet the needs of both programs could result in increased efficiency and lower costs. The Association for Environmental Health and Sciences Foundation convened a panel of environmental practitioners from industry, consulting, and regulatory bodies to examine the benefits and challenges associated with coordinating ERA and NRDA activities in the context of a broad range of regulatory programs. This brief communication presents the opinions and conclusions of the panelists on these issues and reports 2 case studies for which coordinated ERA and NRDA activities produced a positive outcome. Integr Environ Assess Manag 2016;12:616-621. © 2015 SETAC. © 2015 SETAC.

  9. Panel discussion on health effects of low-dose ionizing radiation. Scientific findings and non-threshold hypothesis

    International Nuclear Information System (INIS)

    1995-06-01

    This is a record of a panel discussion in the IAEA Interregional Training Course. In current radiation work, protection measures are taken on the assumption that any amount of radiation, however small, entails a risk of deleterious effects. This so-called non-threshold assumption of radiation effects, on the one hand, creates public distrust of radiation use. However, because the health effects of low-dose ionizing radiation are difficult to verify, wide views ranging from the non-threshold hypothesis to one which sees small amounts of radiation as rather useful and necessary are presented. In this panel discussion, how the health effects of low-dose ionizing radiation should be considered from the standpoint of radiation protection was discussed. Panelists included such eminent scientists as Dr. Sugahara and Dr. Okada, who are deeply interested in this field and are playing leading parts in radiobiology research in Japan, and Dr. Stather, deputy Director of NRPB, UK, who, in UNSCEAR and ICRP, is actively participating in the international review of radiation effects and the preparation of reports on radiation protection recommendations. They agreed with each other that although it is reasonable, under the current scientific understanding, to follow the recommendation of ICRP, research in this area should be strongly promoted hereafter, for basing radiation protection on firm scientific grounds. Many participants actively asked about and discussed problems in their own field. (author)

  10. Innovative probabilistic risk assessment applications: barrier impairments and fracture toughness. Panel Discussion

    International Nuclear Information System (INIS)

    Osterman, Michael; Root, Steven; Li, F.; Modarres, Mohammad; Reinhart, F. Mark; Bradley, Biff; Calhoun, David J.

    2001-01-01

    Full text of publication follows: New probabilistic risk assessment (PRA) applications promise to improve the overall safety and efficiency of nuclear plant operations. This discussion will explore the use of PRA in evaluating barrier integrity with respect to the consequences of natural phenomena such as tornadoes, floods, and harsh environments. Additionally, the session will explore proposals to improve fracture toughness techniques using PRA. (authors)

  11. Excellence in supply chain management--trends and strategies to enhance profitability. Panel discussion.

    Science.gov (United States)

    Gerhart, Bobbie; Baskel, Chris; Van Drasek, Jim; Downing, Scott

    2004-12-13

    Supply-chain management--the art of getting the most at the least cost from the products and services purchased by an organization--has transformed industries such as manufacturing and retailing, and can potentially do the same for healthcare. VHA is committed to keeping its members educated on current thinking and best practices in supply-chain management. In support of that mission, four supply chain experts gathered in Chicago recently at Modern Healthcare's offices to discuss the issues they face in their organizations and the strategies they've found most successful in addressing them.

  12. Contribution to the panel discussion on 'International developments in standards, rules and codes for pressure vessels'

    International Nuclear Information System (INIS)

    Puell, K.

    1992-01-01

    This contribution to the discussion describes the legal system for technical installations in its existing form in the Federal Republic of Germany. The standardization of technical requirements to meet EC Directives and European Standards requires an adjustment, to a limited extent, of the appurtenant legal prerequisites. Given the trend away from tried and tested control mechanisms in the form of third party inspection, there is imminent danger of a reduction in quality. This compels us to consider how to maintain nonetheless the level of safety that has already been reached. (orig.)

  13. Panel Discussion: Common Themes Across ``Bringing Newcomers Into The Physics Community''

    Science.gov (United States)

    Little, Angela

    2014-03-01

    I will be facilitating a discussion between the audience and the four speakers in this session: Dimitri Dounas-Frazer, Catherine Good, Casey Miller, and Katie Hinko. They will all be speaking on the same general topic of supporting newcomers to the physics community at critical transition points but come from a set of diverse contexts and perspectives. Their work spans a wide age range of STEM students and they approach their work through many different lenses: as physics faculty, program directors, education and psychology researchers, and combinations thereof. Broad themes across these contexts and perspectives will be explored such as the role of growth mindset, community, and professional development.

  14. Sustainable development and CERN’s role: Panel discussion at the Globe

    CERN Multimedia

    CERN Bulletin

    2012-01-01

    On Thursday 21 June, on the occasion of the UN Rio+20 Conference on Sustainable Development, some ambitious ecological projects involving CERN and its technologies will be presented in an afternoon of lectures and discussions in the Globe. The event is an opportunity for people at CERN to discuss the Organization’s green credentials and their ecological impact on life in the local area.   “The Globe was seen as a metaphor for the planet and a symbol of sustainable development when it was known as the ‘Palace of Equilibrium’ at Expo02 in Switzerland. Now here at CERN, it is the perfect place to host a debate on the role of technology and innovation in this area," enthuses Bernard Pellequer, who is in charge of event planning for the venue. On the afternoon of 21 June, speakers will present several ambitious projects, such as the eco-neighbourhood “Les Vergers”, the Vernes lake in ...

  15. Long-term outlook for Alberta's primary petrochemical industry : panel discussion : sustainability, feedstocks, infrastructure, transportation

    International Nuclear Information System (INIS)

    Lauzon, D.

    1997-01-01

    The long-term outlook for Dow Chemical's involvement in Alberta's petrochemical industry was discussed. Dow Chemical Canada is a company with annual sales of more than $20 billion that manufactures and supplies chemicals, plastics, energy, agricultural products, consumer goods and environmental services in 157 countries in the world. Alberta is the centre of growth and development for the Canadian petrochemical industry because of the proximity to feedstocks. Alberta is seen as a good, long-term source of ethane. Dow Chemical intends to continue being a major player in the further development of the industry in Alberta. As proof of that confidence, there are 11 capital projects in progress at Dow's Western Canada Operation, totaling $600 million. An important ingredient of the continuing success of the petrochemical industry in Alberta will be the willingness and ability of the federal and provincial governments to work in partnership with industry to develop support infrastructure and policies

  16. Recent advances in acute lymphoblastic leukemia in children and adolescents: an expert panel discussion.

    Science.gov (United States)

    Asselin, Barbara L; Gaynon, Paul; Whitlock, James A

    2013-12-01

    Acute lymphoblastic leukemia (ALL) is the most common form of childhood leukemia, representing 75% to 80% of cases of acute leukemia among children. Dramatic improvements in the cure rates and survival outcomes for children with ALL have been seen over the past several decades; currently the 5-year survival rate for childhood ALL is more than 80%. These improvements have come about because of advances in the understanding of the molecular genetics and pathogenesis of the disease, incorporation of risk-adapted therapy, and the advent of new targeted agents. Scientific advances have provided new insights into leukemogenesis, drug resistance, and host pharmacogenomics, identified novel subtypes of leukemia, and suggested potential targets for therapy. At the same time novel monoclonal antibodies, small molecule inhibitors, chemotherapeutics, and cell-based treatment strategies have been developed and investigated. In this article, experts will discuss some of the current challenges and future directions in the treatment of pediatric ALL. The authors will offer expert guidance to practicing oncologists on how to best incorporate newer treatment approaches into the care of children and adolescents with ALL. The most important ongoing clinical trials in the area will also be reviewed.

  17. Summary of panel discussion

    Energy Technology Data Exchange (ETDEWEB)

    Alang Md Rashid, Nahrul Khair [Malaysian Inst. for Nuclear Technology Research (MINT), Bangi, Selangor (Malaysia); Durante, R W [American Nuclear Society (United States); Hagiwara, Miyuki [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Gupta, M; Nitschke, R L [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States); Basfar, A A [Inst. of Atomic Energy Research, Riyadh (Saudi Arabia); Osman, Mohamad [National Univ. of Malaysia, Bangi, Selangor (Malaysia). Dept. of Genetics

    1997-12-01

    The chairman noted that the main item raised is still public acceptance. other items being safety, financial, and the economics of technology. On public acceptance the chairman commented that the weight of the `displeasure` of the public is not uniform across the spectrum of applications of nuclear science and technology thus the nuclear science and technology should capitalise on the areas in which the public has little apprehension. Further, since public acceptance is a crucial factor, then it must be strengthened. One of the means by which this could be achieved is by exploiting the non-power applications of the technology in various other sectors. sectors.

  18. Summary of panel discussion

    International Nuclear Information System (INIS)

    Nahrul Khair Alang Md Rashid; Durante, R.W.; Miyuki Hagiwara; Basfar, A. A.; Mohamad Osman

    1997-01-01

    The chairman noted that the main item raised is still public acceptance. other items being safety, financial, and the economics of technology. On public acceptance the chairman commented that the weight of the 'displeasure' of the public is not uniform across the spectrum of applications of nuclear science and technology thus the nuclear science and technology should capitalise on the areas in which the public has little apprehension. Further, since public acceptance is a crucial factor, then it must be strengthened. One of the means by which this could be achieved is by exploiting the non-power applications of the technology in various other sectors. sectors

  19. Panel discussion. Session 1

    International Nuclear Information System (INIS)

    Rodgers, B.R.

    1986-01-01

    An attempt is made to identify problems that need research and development work in order to advance low-level radioactive waste technology and to put the industry in a better position in five to ten years, or even twenty-five years from now. Attention is focused on disposal methods, operating procedures, the effects of the establishment of the state compact, and de minimis criteria

  20. Discussing uncertainty and risk in primary care: recommendations of a multi-disciplinary panel regarding communication around prostate cancer screening.

    Science.gov (United States)

    Wilkes, Michael; Srinivasan, Malathi; Cole, Galen; Tardif, Richard; Richardson, Lisa C; Plescia, Marcus

    2013-11-01

    Shared decision making improves value-concordant decision-making around prostate cancer screening (PrCS). Yet, PrCS discussions remain complex, challenging and often emotional for physicians and average-risk men. In July 2011, the Centers for Disease Control and Prevention convened a multidisciplinary expert panel to identify priorities for funding agencies and development groups to promote evidence-based, value-concordant decisions between men at average risk for prostate cancer and their physicians. Two-day multidisciplinary expert panel in Atlanta, Georgia, with structured discussions and formal consensus processes. Sixteen panelists represented diverse specialties (primary care, medical oncology, urology), disciplines (sociology, communication, medical education, clinical epidemiology) and market sectors (patient advocacy groups, Federal funding agencies, guideline-development organizations). Panelists used guiding interactional and evaluation models to identify and rate strategies that might improve PrCS discussions and decisions for physicians, patients and health systems/society. Efficacy was defined as the likelihood of each strategy to impact outcomes. Effort was defined as the relative amount of effort to develop, implement and sustain the strategy. Each strategy was rated (1-7 scale; 7 = maximum) using group process software (ThinkTank(TM)). For each group, intervention strategies were grouped as financial/regulatory, educational, communication or attitudinal levers. For each strategy, barriers were identified. Highly ranked strategies to improve value-concordant shared decision-making (SDM) included: changing outpatient clinic visit reimbursement to reward SDM; development of evidence-based, technology-assisted, point-of-service tools for physicians and patients; reframing confusing prostate cancer screening messages; providing pre-visit decision support interventions; utilizing electronic health records to promote benchmarking/best practices; providing

  1. Innovation for a better life: IdeaSquare to host a panel discussion for the 2016 Millennium Technology Prize

    CERN Multimedia

    Antonella Del Rosso

    2015-01-01

    The one-million-euro Millennium Technology Prize promotes technological innovations that improve the quality of people’s lives. A series of panel discussions are being held worldwide to draw attention to the themes of the prize and to promote nominations for high-calibre candidates for the 2016 award. For the first time, IdeaSquare has been chosen as one of the venues and CERN people are invited to take part. Save the date: 30 June, 3 p.m.   The Millennium Technology Prize was established in 2004 by the Technology Academy Finland (TAF), an independent foundation whose mission is “to promote innovations that improve the quality of people’s lives in a sustainable manner”. Awarded every other year, the prize has already recognised the work of seven great innovators who developed technological innovations to tackle the great challenges of mankind: learning, health and a clean environment. The first prize was awarded to Tim Berners-Lee for the World Wide Web. E...

  2. TU-C-18C-01: Medical Physics 1.0 to 2.0: Introduction and Panel Discussion

    International Nuclear Information System (INIS)

    Samei, E; Pfeiffer, D; Frey, G; Krupinski, E; Pizzutiello, R; Carson, P; Mahesh, M; Hangiandreou, N; Jordan, D; Dixon, R

    2014-01-01

    field that speaks to the new paradigms of value-based and evidence-based medicine, comparative effectiveness, and meaningful use. The panel discussion that follows includes prominent practitioners, thinkers, and leaders that would lead the discussion on how Medical Physics 2.0 can be actualized. Topics of discussion will include the administrative, financial, regulatory, and accreditation requirements of the new paradigm, effective models of practice, and the steps that we need to take to make MP 2.0 a reality. Learning Objectives: To understand the new paradigm of clinical medical physics practice extending from traditional insular models of compliance towards teambased models of operational engagement. To understand how clinical physics can most effectively contribute to clinical care. Learn to identify strengths and weaknesses in studies designed to measure the effect of low doses of ionizing radiation To recognize the impediments to Medical Physics 2.0 paradigm

  3. TU-C-18C-01: Medical Physics 1.0 to 2.0: Introduction and Panel Discussion

    Energy Technology Data Exchange (ETDEWEB)

    Samei, E [Duke University Medical Center, Durham, NC (United States); Pfeiffer, D [Boulder Community Hospital, Boulder, CO (United States); Frey, G [The American Board of Radiology, Charleston, SC (United States); Krupinski, E [University Arizona, Tucson, AZ (United States); Pizzutiello, R [Upstate Medical Physics, Victor, NY (United States); Carson, P [The University of Michigan Health System, Ann Arbor, MI (United States); Mahesh, M [Johns Hopkins Univ, Baltimore, MD (United States); Hangiandreou, N [Mayo Clinic, Rochester, MN (United States); Jordan, D [University Hospitals Case Medical Center, Cleveland, OH (United States); Dixon, R

    2014-06-15

    field that speaks to the new paradigms of value-based and evidence-based medicine, comparative effectiveness, and meaningful use. The panel discussion that follows includes prominent practitioners, thinkers, and leaders that would lead the discussion on how Medical Physics 2.0 can be actualized. Topics of discussion will include the administrative, financial, regulatory, and accreditation requirements of the new paradigm, effective models of practice, and the steps that we need to take to make MP 2.0 a reality. Learning Objectives: To understand the new paradigm of clinical medical physics practice extending from traditional insular models of compliance towards teambased models of operational engagement. To understand how clinical physics can most effectively contribute to clinical care. Learn to identify strengths and weaknesses in studies designed to measure the effect of low doses of ionizing radiation To recognize the impediments to Medical Physics 2.0 paradigm.

  4. "Population and poverty: major barriers to food accessibility" -- a panel discussion on civil society and people's participation.

    Science.gov (United States)

    1996-01-01

    This paper summarizes conference statements on poverty and food policies that were made by parliamentary members from Malaysia, the Philippines, and India. These presentations were made after the main panel discussion on barriers to food accessibility. In Malaysia the government adopted a National Agricultural Policy in 1984. This policy encouraged increased productivity, effective use of resources, agricultural credit and incentives, and integrated pest management. Strong support was given to the food processing industry. Poverty was the main reason for food inaccessibility. Through government efforts, poverty was reduced from 16.5% in 1990 to 8.9% in 1995. The Filipino member reported that government efforts had focused on national campaigns to combat hunger and to encourage community participation. The government was forced to implement a national Plan of Action for Food Security due to increased population, environmental degradation, closing land frontiers, and the global economy. The Plan encouraged increases in productivity, price and supply stabilization, maintenance of stocks, and rice subsidies for the poor. Gender concerns were being incorporated into development programs. The Indian member linked food insecurity to world resource problems. He stated that food problems included imbalances between supply and demand, but more importantly inequalities in access to food and differences in nutritional content of food. Populations in developing countries spent a larger proportion of income on food of lesser quality and variety that contributed to nutritional deficiencies, particularly among women and children. Food insecurity was part of the cycle of poverty, hunger, low productivity, and high mortality. Poverty was the primary cause and a major consequence of hunger and chronic food insecurity. Although India increased food productivity, food insecurity remained. Multidisciplinary approaches are needed.

  5. PMJ panel discussion overview on mask complexities, cost, and cycle time in 32-nm system LSI generation: conflict or concurrent?

    Science.gov (United States)

    Hosono, Kunihiro; Kato, Kokoro

    2008-10-01

    This is a report on a panel discussion organized in Photomask Japan 2008, where the challenges about "Mask Complexities, Cost, and Cycle Time in 32-nm System LSI Generation" were addressed to have a look over the possible solutions from the standpoints of chipmaker, commercial mask shop, DA tool vendor and equipments makers. The wrap-up is as follows: Mask complexities justify the mask cost, while the acceptable increase rate of 32nm-mask cost significantly differs between mask suppliers or users side. The efficiency progress by new tools or DFM has driven their cycle-time reductions. Mask complexities and cost will be crucial issues prior to cycle time, and there seems to be linear correlation between them. Controlling complexity and cycle time requires developing a mix of advanced technologies, and especially for cost reduction, shot prices in writers and processing rates in inspection tools have been improved remarkably by tool makers. In addition, activities of consortium in Japan (Mask D2I) are expected to enhance the total optimization of mask design, writing and inspection. The cycle-time reduction potentially drives the lowering of mask cost, and, on the other, the pattern complexities and tighter mask specifications get in the way to 32nm generation as well as the nano-economics and market challenges. There are still many difficult problems in mask manufacturing now, and we are sure to go ahead to overcome a 32nm hurdle with the advances of technologies and collaborations by not only technologies but also finance.

  6. TU-G-BRB-05: Panel Discussion: Clinical Trials in Proton and Ion Therapy - Are We Ready?

    International Nuclear Information System (INIS)

    Schulte, R.

    2015-01-01

    Proton therapy, in particular, and ion therapy, just beginning, are becoming an increasing focus of attention in clinical radiation oncology and medical physics. Both modalities have been criticized of lacking convincing evidence from randomized trials proving their efficacy, justifying the higher costs involved in these therapies. This session will provide an overview of the current status of clinical trials in proton therapy, including recent developments in ion therapy. As alluded to in the introductory talk by Dr. Schulte, opinions are diverging widely as to the usefulness and need for clinical trials in particle therapy and the challenge of equipoise. The lectures will highlight some of the challenges that surround clinical trials in particle therapy. One, presented by Dr. Choy from UT Southwestern, is that new technology and even different types of particles such as helium and carbon ions are introduced into this environment, increasing the phase space of clinical variables. The other is the issue of medical physics quality assurance with physical phantoms, presented by Mrs. Taylor from IROC Houston, which is more challenging because 3D and 4D image guidance and active delivery techniques are in relatively early stages of development. The role of digital phantoms in developing clinical treatment planning protocols and as a QA tool will also be highlighted by Dr. Lee from NCI. The symposium will be rounded off by a panel discussion among the Symposium speakers, arguing pro or con the need and readiness for clinical trials in proton and ion therapy. Learning Objectives: To get an update on the current status of clinical trials allowing or mandating proton therapy. Learn about the status of planned clinical trials in the U.S. and worldwide involving ion therapy. Discuss the challenges in the design and QA of clinical trials in particle therapy. Learn about existing and future physical and computational anthropomorphic phantoms for charged particle clinical trial

  7. Geochemistry Review Panel report on the SRP geochemistry program and draft geochemistry summary program plan (May, 1986) and discussion of panel recommendations

    International Nuclear Information System (INIS)

    1986-12-01

    The Geochemistry Review Panel (GRP) was established by the Salt Repository Project Office (SRPO) to help evaluate geochemistry-related issues in the US Department of Energy's nuclear waste repository program. The May 1986 meeting of the GRP reviewed the Salt Repository Program (SRP) geochemistry program developed by the Office of Nuclear Waste Isolation (ONWI). This program is described in the Draft Geochemistry Plan of April 9, 1986. This report documents the GRP's comments and recommendations on this subject and the ONWI responses to the specific points raised by the GRP

  8. Track 7: policy and public interest U.S.-Russian nuclear security cooperation: navigating the present realities. Panel Discussion

    International Nuclear Information System (INIS)

    Hayden, N.K.; Hayden-Prindle, Nancy; McCarthy, Maureen; Rich, John; Graham, Thomas Jr.; Mizin, Victor; Cagan, Debra; Alessi, Vic

    2001-01-01

    Full text of publication follows: In the 10 yr since the beginning of cooperation between the United States and the Russian Federation on nuclear security and nonproliferation issues, the political, economic, and security environment governing the nuclear security cooperation has evolved and, in some cases, undergone dramatic changes. On one hand, the protection of nuclear weapons and materials continues as an urgent national security concern for both the United States and Russia. At the same time, defense infrastructures have been closed or converted to civilian purposes, and there has been increased activity in international cooperation for civilian nuclear technology. This special panel will explore the future of the U.S.-Russia nuclear cooperation with particular attention to the following three themes. Theme 1: Managing the Risks: U.S.-Russian Federation Cooperative Programs for Nuclear Weapons and Materials Security; Theme 2: Creating the Benefits: The Changing Nature of Russia's Domestic Nuclear Industry; Theme 3: Addressing the Impediments: United States and Russia as Nuclear Exporters: Reconciling Nonproliferation Goals, Technology Advancements, and Economic Incentives

  9. MO-F-201-00: PANEL DISCUSSION: Preparing for Parts 2 and 3 of the ABR Therapy Medical Physics Exam

    International Nuclear Information System (INIS)

    2016-01-01

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

  10. MO-F-201-00: PANEL DISCUSSION: Preparing for Parts 2 and 3 of the ABR Therapy Medical Physics Exam

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-06-15

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

  11. Ethics & the CEO. Panel discussion.

    Science.gov (United States)

    Yuspeh, A; Ryan, M J; Dalton, J E; Tong, D A; Hofmann, P B

    1998-01-20

    When does a golden parachute become a bribe? How should an imperiled hospital serve both its mission and the interests of good business? H&HN put five executives on the spot with these questions, asking them to respond to a fictitious scenario inspired by today's headlines. Here's what they said.

  12. Panel Session

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege

    2004-01-01

    In this panel session, four researchers will discuss the role of a theoretical foundation, in particular AT, in the design of information technology based artefacts. The general discussion will take of from a specific examination of the ActAD approach.......In this panel session, four researchers will discuss the role of a theoretical foundation, in particular AT, in the design of information technology based artefacts. The general discussion will take of from a specific examination of the ActAD approach....

  13. Maynard Participation in Alaska Forum on the Environment Panel Discussion on Increasing Input to the US National Climate Assessment (NCA) and the Intergovernmental Panel on Climate Change (IPCC) Processes from Alaska, with Emphasis on Indigenous Peoples Issues

    Science.gov (United States)

    Maynard, Nancy G.

    2012-01-01

    Dr. Nancy Maynard was invited by the Alaska Forum on the Environment to participate in a Panel Discussion to discuss (1) background about what the US NCA and International IPCC assessments are, (2) the impact the assessments have on policy-making, (3) the process for participation in both assessments, (4) how we can increase participation by Indigenous Peoples such as Native Americans and Alaska Natives, (5) How we can increase historical and current impacts input from Native communities through stories, oral history, "grey" literature, etc. The session will be chaired by Dr. Bull Bennett, a cochair of the US NCA's chapter on "Native and Tribal Lands and Resources" and Dr. Maynard is the other co-chair of that chapter and they will discuss the latest activities under the NCA process relevant to Native Americans and Alaska Natives. Dr. Maynard is also a Lead Author of the "Polar Regions" chapter of the IPCC WG2 (5th Assessment) and she will describes some of the latest approaches by the IPCC to entrain more Indigenous peoples into the IPCC process.

  14. Exploring practical approaches to maximising data quality in electronic healthcare records in the primary care setting and associated benefits. Report of panel-led discussion held at SAPC in July 2014.

    Science.gov (United States)

    Dungey, Sheena; Glew, Simon; Heyes, Barbara; Macleod, John; Tate, A Rosemary

    2016-09-01

    Electronic healthcare records provide information about patient care over time which not only affords the opportunity to improve patient care directly through effective monitoring and identification of care requirements but also offers a unique platform for both clinical and service-model research essential to the longer-term development of the health service. The quality of the recorded data can, however, be variable and can compromise the validity of data use both for primary and secondary purposes. In order to explore the challenges and benefits of and approaches to recording high quality primary care electronic records, a Clinical Practice Research Datalink (CPRD) sponsored workshop was held at the Society of Academic Primary Care (SAPC) conference in 2014 with the aim of engaging GPs and other data users. The workshop was held as a structured discussion, led by an expert panel and focused around three questions: (1) What are the data quality priorities for clinicians and researchers? How do these priorities differ or overlap? (2) What challenges might GPs face in provision of good data quality both for treating their patients and for research? Do these aims conflict? (3) What tools (such as data metrics and visualisations or software components) could assist the GP in improving data quality and patient management and could this tie in with analytical processes occurring at the research stage? The discussion highlighted both overlap and differences in the perceived data quality priorities and challenges for different user groups. Five key areas of focus were agreed upon and recommendations determined for moving forward in improving quality. The importance of good high quality electronic healthcare records has been set forth along with the need for a practical user-considered and collaborative approach to its improvement.

  15. Track 2: business outlook and the significance of safety - safety of nuclear power reactor installations in a deregulated environment. Panel Discussion

    International Nuclear Information System (INIS)

    Schultz, Stephen P.; Floyd, Stephen; Berkow, Herbert N.; Quinn, Edward L.; Hagen, Ronald E.; Esselman, Thomas C.

    2001-01-01

    Full text of publication follows: Deregulation in the nuclear industry sets the stage for a new production environment with cost and profit-based competition. This not only affects the commercial reactor sector but also is a key element of the U.S. Department of Energy's (DoE's) strategy for facility deployment and commercialization. This panel is designed to explore how these transitions are being made with the assurance of the principle of safety in operations. Panelists have been assembled from industry, the U.S. Nuclear Regulatory Commission (NRC), and DOE to explore these challenges and opportunities in the deregulated operational environment from a variety of perspectives. Presentations by each panelist will be followed by a panel session that will explore both technical and process elements of these major transitions. Success in a deregulated environment requires both safety and economic operation of facilities. With respect to each of these attributes, competition may be expected to result in substantially higher levels of performance. This panel will examine how these expectations are likely to be set, how they will be measured, and what will constitute success. The baseline for evaluation begins with assessment of past performance. The panelists have examined this for both the commercial nuclear reactor sector, as well as for the DOE complex. The Nuclear Energy Institute and the NRC have been working over the past few years on a program to establish new performance indicators for monitoring safety of reactor operation. The session participants will first examine the effectiveness of this system as it is designed to measure performance in today's environment. Second, the panelists will project the capabilities and attributes of this system in monitoring safety in transition to a deregulated, consolidated market. Will these systems have the capability to identify trends that will be significant in this new environment? Will today's system and metrics be

  16. Panel discussion: Progress and plans for magnetic fusion: Summary of comments on recent progress in fusion research at the Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Sheffield, J.

    1989-01-01

    Progress in fusion research is marked not so much by a few giant steps as by a continual number of small steps, which yield a steady advance toward the goal of producing a fusion reactor. During the past year, there have been two such steps in the Oak Ridge National Laboratory (ORNL) program: the experimental demonstration of access to the second stable region of beta in the Advanced Toroidal Facility (ATF); and the acceleration of a frozen hydrogen pellet by an intense electron beam. This paper discusses these steps

  17. MNB panel discussion with Olivier Blanchard

    OpenAIRE

    Olivier J. Blanchard; Péter Benczúr

    2013-01-01

    A citizen of France, Olivier Blanchard has spent his professional life in Cambridge, U.S. After obtaining his PhD in economics at the Massachusetts Institute of Technology in 1977, he taught at Harvard University, returning to MIT in 1982, where he has been since then. He is the Class of 1941 Professor of Economics, and a former Chair of the Economics Department. He is currently on leave from MIT, as Economic Counsellor and Director of the Research Department of the International Monetary Fun...

  18. Session 5 summarizing statements and panel discussion

    International Nuclear Information System (INIS)

    1977-01-01

    A set of contributions proposes synthetic overviews on different topics: zircaloy oxidation under accident conditions, zircaloy deformation and rupture behaviour, fuel behaviour code development, applications of fuel research results to reactor licensing, research on accident behaviour of fuel, fuel accident behaviour research in risk perspective. The last contribution gives the main conclusions and recommendation from the meeting

  19. Panel Discussion on Origin of Imperfections

    Science.gov (United States)

    1991-11-01

    ELECTRON MICROSCOPE D. POSITRON ANNIHILATION 7. PHOTOSTIMULATED EXO-ELECTRON EMISSION 8. SURFACE EXAMINATION A. OPTICAL HOLOGRAPHY 9. EDDY...during fracture of polycarbonate, alkali emission from NaCl, and 02 emission during microcracking in single crystal MgO . The results indicate that there

  20. Innovative public information programs. Panel Discussion

    International Nuclear Information System (INIS)

    Emmy Roos; Chuck Vincent; David Knox; Lauretta Kerchma-Olson

    2001-01-01

    Full text of publication follows: What is new in public information in the nuclear industry? With developments such as deregulation in the United States, the ever-changing global energy market, and constant scientific and technological advances, public information programs are more important than ever. Co-sponsored by the American Nuclear Society (ANS) Public Information Committee, panelists will present news of innovations in a broad spectrum of areas. These include the new research on the views of public opinion leaders about nuclear energy, the new ANS Public Information Web site, volunteer outreach by nuclear professionals at the local level, public information innovations at nuclear utilities, unique international programs, an update on the U.S. Nuclear Regulatory Commission's strategic plan for public confidence, and recent changes at the U.S. Department of Energy. Invited presentations: New ANS Public Information Web Site International Programs (Emmy Roos (ETCetera)); ANS Teacher Workshops and the Northern Ohio Section's Highly Successful Implementation of Them (Chuck Vincent (ANS)); Innovations at Exelon (David Knox (Exelon)) Innovative Public Information Center Programs (Lauretta Kerchma-Olson (Nucl Mgt, Two Rivers))

  1. Panel discussion: LNG's future in Asia

    International Nuclear Information System (INIS)

    Ohashi, Tadahiko

    1992-01-01

    The panelists convened to: (1) identify and evaluate the role which LNG is likely to play in the changing energy scene; (2) to examine the future supply and demand structure of the LNG trade; (3) to discover the key obstacles to continued growth in LNG trade; and (4) to find solutions to these problems. The panelists identified and outlined growing opportunities for LNG utilization in Asia during the next two decades. They shared the opinion that the structure of the supply and demand balance for LNG in Asia will shift during the next decade, providing considerable room for new projects. The key obstacles to continued growth in LNG trade are the lack of: long-distance transmission networks and an efficient competitive market pricing mechanism for LNG in the Asian region. The major importers in the region are keen on developing a range of new long-term supply alternatives, not simply within the Asia-Pacific region, but also from a wider perspective. These alternatives include: financing the expansion of production from existing facilities, development of new fields, and construction of long-distance pipelines

  2. MO-FG-BRB-04: Panel discussion

    International Nuclear Information System (INIS)

    Van Dyk, J.

    2015-01-01

    The global burden of cancer is growing rapidly with an estimated 15 million new cases per year worldwide in 2015, growing to 19 million by 2025 and 24 million by 2035. The largest component of this growth will occur in low-to-middle income countries (LMICs). About half of these cases will require radiation treatment. The gap for available cancer treatment, including radiation therapy, between high-income countries (HICs) and LMICs is enormous. Accurate data and quantitative models to project the needs and the benefits of cancer treatment are a critical first step in closing the large cancer divide between LMICs and HICs. In this context, the Union for International Cancer Control (UICC) has developed a Global Task Force on Radiotherapy for Cancer Control (GTFRCC) with a charge to answer the question as to what it will take to close the gap between what exists today and reasonable access to radiation therapy globally by 2035 and what the potential clinical and economic benefits are for doing this. The Task Force has determined the projections of cancer incidence and the infrastructure required to provide access to radiation therapy globally. Furthermore it has shown that appropriate investment not only yields improved clinical outcomes for millions of patients but that it also provides an overall economic gain throughout all the income settings where this investment is made. This symposium will summarize the facets associated with this global cancer challenge by reviewing the cancer burden, looking at the requirements for radiation therapy, reviewing the benefits of providing such therapy both from a clinical and economic perspective and finally by looking at what approaches can be used to aid in the alleviation of this global cancer challenge. The speakers are world renowned experts in global public health issues (R. Atun), medical physics (D. Jaffray) and radiation oncology (N. Coleman). Learning Objectives: To describe the global cancer challenge and the corresponding potential benefits of addressing this challenge. To describe what radiation therapy infrastructure, in terms of facilities, equipment and personnel, will be required to address this challenge. To describe models of addressing personnel and infrastructure mobilization and capacity building within regions where significant cancer treatment disparities exist

  3. Business challenges in the universities. Panel Discussion

    International Nuclear Information System (INIS)

    Klein, Andrew; Lee, John C.; Peterson, Per; Simard, Ron; Gates, W. Gary

    2001-01-01

    Full text of publication follows: University nuclear science and engineering programs in the United States currently operate in a business climate that involves serious and dramatic change. The number of degree-granting nuclear engineering programs within the nation's universities has declined over the past two decades to approximately 25. More than two-thirds of the faculty in these programs are 45 yr or older. Recruiting and retaining the best faculty and students continue to be vital to the continued success and existence of these programs. Many universities are also experiencing difficulty in finding support for their research and training reactors. There are currently only 28 university research reactors remaining across the United States. Many of these reactors were initially established with 30- to 40-yr operating licenses and will require re-licensing in the next several years. Combined, the university nuclear engineering educational programs and the university research reactors form a fundamental and vital component in a broad spectrum of our national research and education infrastructure and are critical to many national priorities such as energy, health care, education, environment, and technology transfer. Speakers have been selected from various universities, the Nuclear Energy Institute, and industry to address problems related to workforce forecasting, student recruiting and retention, research reactor operation and financing, academic accreditation, and other current issues relevant to nuclear engineering education and research. (authors)

  4. Panel discussion on prospects for fusion power

    International Nuclear Information System (INIS)

    Sheffield, J.

    1986-01-01

    Although substantial progress is made every year in fusion research, the projected time to realize the ultimate goal of commercial fusion always seems to be 25 to 30 years away. This shifting schedule reflects the underlying difficulty of developing fusion. Every new technology improves the prospects for success, yet as each fusion mountain is scaled, it serves mainly to bring a better view of the next mountain. Two questions are considered: (1) why are so many configurations studied, and (2) what constitutes an economic power density

  5. Report on ISFG SNP Panel Discussion

    DEFF Research Database (Denmark)

    Butler, John M.; Budowle, B.; Gill, P.

    2008-01-01

    Six scientists presented their views and experience with single nucleotide polymorphism (SNP) markers, multiplexes, and methods regarding their potential application in forensic identity and relationship testing. Benefits and limitations of SNPs were reviewed, as were different SNP marker...

  6. The Safety and Efficacy of a Sustainable Marine Extract for the Treatment of Thinning Hair: A Summary of New Clinical Research and Results from a Panel Discussion on the Problem of Thinning Hair and Current Treatments.

    Science.gov (United States)

    Hornfeldt, Carl S; Holland, Mark; Bucay, Vivian W; Roberts, Wendy E; Waldorf, Heidi A; Dayan, Steven H

    2015-09-01

    Alopecia and thinning hair are highly prevalent conditions affecting a large proportion of men and women. Diffused hair loss is often more difficult to diagnose in women, mostly due to over-reliance on the assumption of hormonal influences, and it is commonly treated with a multi-therapy approach. Clinical studies have demonstrated the effectiveness of a nutraceutical supplement to provide essential nutrients that aid in stimulating existing hair growth and reducing hair shedding. The supplement Viviscal® contains a proprietary blend of proteins, lipids, and glycosaminoglycans derived from sustainable marine sources. We present here a summary of studies that have examined the safety and efficacy of this nutraceutical; as well as discussions on hair loss and current therapies from a recently convened expert panel in dermatology and plastic surgery.

  7. Panel Analysis

    DEFF Research Database (Denmark)

    Brænder, Morten; Andersen, Lotte Bøgh

    2014-01-01

    Based on our 2013-article, ”Does Deployment to War Affect Soldiers' Public Service Motivation – A Panel Study of Soldiers Before and After their Service in Afghanistan”, we present Panel Analysis as a methodological discipline. Panels consist of multiple units of analysis, observed at two or more...... in research settings where it is not possible to distribute units of analysis randomly or where the independent variables cannot be manipulated. The greatest disadvantage in regard to using panel studies is that data may be difficult to obtain. This is most clearly vivid in regard to the use of panel surveys...... points in time. In comparison with traditional cross-sectional studies, the advantage of using panel studies is that the time dimension enables us to study effects. Whereas experimental designs may have a clear advantage in regard to causal inference, the strength of panel studies is difficult to match...

  8. Puncture panel optimization

    International Nuclear Information System (INIS)

    Glass, R.E.; Longenbaugh, R.S.

    1986-01-01

    Sandia National Laboratories developed the TRansUranic PACkage Transporter (TRUPACT) to transport defense contact-handled transuranic wastes. The package has been designed to meet the normal and hypothetical accident conditions in 10CFR71 which includes the demonstrated ability to survive a 1-meter drop onto a mild steel pin. The puncture protection is provided by puncture resistant panels. In conjunction with the development of TRUPACT, a series of experiments has been conducted to reduce the weight of the puncture resistant panels. The initial scoping tests resulted in a preliminary design incorporating 30 layers of Kevlar. This design has been shown to meet the regulatory puncture test. To reduce the weight of this panel, subscale tests were conducted on panels utilizing Kevlar yarns with varying mass per unit length (denier) as well as different resins. This paper reviews the testing undertaken in the original panel development and discusses the results obtained from the recent subscale and full-scale optimization tests

  9. Solar panel cleaning robot

    Science.gov (United States)

    Nalladhimmu, Pavan Kumar Reddy; Priyadarshini, S.

    2018-04-01

    As the demand of electricity is increasing, there is need to using the renewable sources to produce the energy at present of power shortage, the use of solar energy could be beneficial to great extent and easy to get the maximum efficiency. There is an urgent in improving the efficiency of solar power generation. Current solar panels setups take a major power loss when unwanted obstructions cover the surface of the panels. To make solar energy more efficiency of solar array systems must be maximized efficiency evaluation of PV panels, that has been discussed with particular attention to the presence of dust on the efficiency of the PV panels have been highlighted. This paper gives the how the solar panel cleaning system works and designing of the cleaning system.

  10. Stressed skin panels

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2001-07-01

    Advantages and disadvantages of stressed skin panels, also known as structural insulated panels (SIPs), are discussed as material and labour-saving alternatives to traditional stick framing. Stressed skin panels are manufactured 'sandwich' assemblies with a rigid insulating polystyrene foam core, whose interior and exterior surfaces are bonded into panels. The skins distribute and carry the structural loading while the bonded foam core provides insulation and keeps the two skins aligned. Since there are fewer framing members, there is little thermal bridging and the R-value remains high. SIPs are usually manufactured in four feet by eight feet panels, although some manufacturers can produce panels up to eight feet by forty feet. SIPs are resource efficient as they use less wood than conventional framing (about 25 per cent less); can structurally cover large spans, requiring less supplementary framing. Use of SIPs eliminate the need for headers over small openings; provide the ability to nail anywhere; create less scrap and waste; lessen vulnerability to unfavourable weather and other job-site hazards, can reduce delays, and often can produce significant savings in material and labour costs. Limitations include the more complex approaches to plumbing and electrical systems, although this can be minimized by designers by incorporating much of the plumbing and electrical work on interior (non-panel) walls. Most stressed skin panels require one-half inch interior gypsum drywall. If become wet, stressed skin panels take a long time to dry out and may harbour mold growth. Larger stressed-skin panels used in floors and roofs, may require cranes or other machinery for handling because of their weight. Although not without some environmental impact, overall, stressed skin panels are judged to be a resource-efficient building technology with significant energy-efficiency benefits and distinct advantages over stick framing. 3 photos.

  11. Summary discussions

    International Nuclear Information System (INIS)

    Ritchie, R.H.

    1982-01-01

    Remarks intended to highlight topics of importance for future research were made by three of the participants at the conclusion of the Seminar. A brief listing is given of topics discussed by each of these rapporteurs

  12. Panel 5: Microbiology and Immunology Panel

    Science.gov (United States)

    Murphy, Timothy F.; Chonmaitree, Tasnee; Barenkamp, Stephen; Kyd, Jennelle; Nokso-Koivisto, Johanna; Patel, Janak A.; Heikkinen, Terho; Yamanaka, Noboru; Ogra, Pearay; Swords, W. Edward; Sih, Tania; Pettigrew, Melinda M.

    2014-01-01

    Objective The objective is to perform a comprehensive review of the literature from January 2007 through June 2011 on the virology, bacteriology, and immunology related to otitis media. Data Sources PubMed database of the National Library of Medicine. Review Methods Three subpanels with co-chairs comprising experts in the virology, bacteriology, and immunology of otitis media were formed. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a second draft was created. The entire panel met at the 10th International Symposium on Recent Advances in Otitis Media in June 2011 and discussed the review and refined the content further. A final draft was created, circulated, and approved by the panel. Conclusion Excellent progress has been made in the past 4 years in advancing an understanding of the microbiology and immunology of otitis media. Advances include laboratory-based basic studies, cell-based assays, work in animal models, and clinical studies. Implications for Practice The advances of the past 4 years formed the basis of a series of short-term and long-term research goals in an effort to guide the field. Accomplishing these goals will provide opportunities for the development of novel interventions, including new ways to better treat and prevent otitis media. PMID:23536533

  13. Dynamic panel data models

    NARCIS (Netherlands)

    Bun, M.J.G.; Sarafidis, V.

    2013-01-01

    This Chapter reviews the recent literature on dynamic panel data models with a short time span and a large cross-section. Throughout the discussion we considerlinear models with additional endogenous covariates. First we give a broad overview of available inference methods placing emphasis on GMM.

  14. Lipid Panel

    Science.gov (United States)

    ... A routine cardiac risk assessment typically includes a fasting lipid panel. Beyond that, research continues into the usefulness of other non-traditional markers of cardiac risk, such as Lp-PLA 2 . A health practitioner may choose to evaluate one or more ...

  15. Analysis of Panel Data

    Science.gov (United States)

    Hsiao, Cheng

    2003-02-01

    Panel data models have become increasingly popular among applied researchers due to their heightened capacity for capturing the complexity of human behavior, as compared to cross-sectional or time series data models. This second edition represents a substantial revision of the highly successful first edition (1986). Recent advances in panel data research are presented in an accessible manner and are carefully integrated with the older material. The thorough discussion of theory and the judicious use of empirical examples make this book useful to graduate students and advanced researchers in economics, business, sociology and political science.

  16. Panel fabrication utilizing GaAs solar cells

    Science.gov (United States)

    Mardesich, N.

    1984-01-01

    The development of the GaAs solar cells for space applications is described. The activities in the fabrication of GaAs solar panels are outlined. Panels were fabricated while introducing improved quality control, soldering laydown and testing procedures. These panels include LIPS II, San Marco Satellite, and a low concentration panel for Rockwells' evaluation. The panels and their present status are discussed.

  17. Discussion Graphs

    DEFF Research Database (Denmark)

    Kiciman, Emre; Counts, Scott; Gamon, Michael

    2014-01-01

    , time and other confounding factors, few of the studies that attempt to extract information from social media actually condition on such factors due to the difficulty in extracting these factors from naturalistic data and the added complexity of including them in analyses. In this paper, we present......Much research has focused on studying complex phenomena through their reflection in social media, from drawing neighborhood boundaries to inferring relationships between medicines and diseases. While it is generally recognized in the social sciences that such studies should be conditioned on gender...... a simple framework for specifying and implementing common social media analyses that makes it trivial to inspect and condition on contextual information. Our data model—discussion graphs—captures both the structural features of relationships inferred from social media as well as the context...

  18. Panel surveys

    OpenAIRE

    MADRE, JL; ZUMKELLER, D; CHLOND, B; ARMOOGUM, J

    2004-01-01

    l'analyse du comportement humain constitue un enjeu important dans le domaine des transports, lequel se transforme radicalement sous la pression des évolutions économique, écologique et démographique. les premières grandes études ont commence il y a plus d'une dizaine d'années : parc auto sofres en france, puget sound panel a seattle. cet article fait le bilan de ces expériences et met en évidence les principaux problèmes méthodologiques rencontres tout en proposant de nouvelles directions d'...

  19. Use of Internet panels to conduct surveys.

    Science.gov (United States)

    Hays, Ron D; Liu, Honghu; Kapteyn, Arie

    2015-09-01

    The use of Internet panels to collect survey data is increasing because it is cost-effective, enables access to large and diverse samples quickly, takes less time than traditional methods to obtain data for analysis, and the standardization of the data collection process makes studies easy to replicate. A variety of probability-based panels have been created, including Telepanel/CentERpanel, Knowledge Networks (now GFK KnowledgePanel), the American Life Panel, the Longitudinal Internet Studies for the Social Sciences panel, and the Understanding America Study panel. Despite the advantage of having a known denominator (sampling frame), the probability-based Internet panels often have low recruitment participation rates, and some have argued that there is little practical difference between opting out of a probability sample and opting into a nonprobability (convenience) Internet panel. This article provides an overview of both probability-based and convenience panels, discussing potential benefits and cautions for each method, and summarizing the approaches used to weight panel respondents in order to better represent the underlying population. Challenges of using Internet panel data are discussed, including false answers, careless responses, giving the same answer repeatedly, getting multiple surveys from the same respondent, and panelists being members of multiple panels. More is to be learned about Internet panels generally and about Web-based data collection, as well as how to evaluate data collected using mobile devices and social-media platforms.

  20. International Medical Graduates. Immigration Law and Policy and the U.S. Physician Workforce. Council on Graduate Medical Education Resource Paper. A COGME Panel Discussion (Washington, DC, March 12, 1996).

    Science.gov (United States)

    Health Resources and Services Administration (DHHS/PHS), Rockville, MD. Bureau of Health Professions.

    This report includes presentations and discussions by the Council on Graduate Medical Education (COGME) addressing issues related to the current supply of physicians in the United States and the role of international medical graduates (IMGs). The presentations focused on the following areas: the exchange visitor program and the use of waivers, the…

  1. Law Panel in action.

    Science.gov (United States)

    Odulana, J

    In September 1976 the Africa Regional Council (ARC) of IPPF created a Law Panel to 1) advise the ARC on the emphasis of laws and parenthood programs in the region, 2) investigate legal obstacles to family planning and ways of removing them, 3) institute a monitoring service on laws and court decisions affecting planned parenthood, and 4) prepare a list of lawyers and legal reformers by country. The panel has 1) recommended adoption of an IPPF Central Medical Committee and Central Law Panel statement on sterilization, adolescent fertility control, and the use of medical and auxiliary personnel in family planning services with guidelines for Africa; 2) appointed National Legal Correspondents to carry on the monitoring service mentioned above in 18 countries; and 3) discussed solutions to problems in delivering family planning services with family planning associations in Tanzania, Zambia, Mauritius, Madagascar, and Kenya. Laws governing family planning education and services, marriage, divorce, and maternity benefits in these countries are summarized. In 1978 the panel will hold 2 workshops on law and the status of women.

  2. Traditional methods v. new technologies - dilemmas for dietary assessment in large-scale nutrition surveys and studies: a report following an international panel discussion at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, 3 September 2015.

    Science.gov (United States)

    Amoutzopoulos, B; Steer, T; Roberts, C; Cade, J E; Boushey, C J; Collins, C E; Trolle, E; de Boer, E J; Ziauddeen, N; van Rossum, C; Buurma, E; Coyle, D; Page, P

    2018-01-01

    The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion 'Traditional methods v. new technologies: dilemmas for dietary assessment in population surveys', was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer potential advantages including faster data processing and better data quality. This is a fast-moving field and there is evidence of increasing demand for the use of new technologies amongst the general public and researchers. There is a need for research and investment to support efforts being made to facilitate the inclusion of new technologies for rapid, accurate and representative data.

  3. Geothermal Technologies Program Blue Ribbon Panel Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-06-17

    The Geothermal Technologies Program assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a guided discussion on the future of geothermal energy in the United States and the role of the DOE Program. The Geothermal Blue Ribbon Panel Report captures the discussions and recommendations of the experts. An addendum is available here: http://www.eere.energy.gov/geothermal/pdfs/gtp_blue_ribbon_panel_report_addendum10-2011.pdf

  4. Panel discussion on vaccine development to meet U.S. and international needs. Strategies for reducing the disincentives to HIV vaccine development: description of a successful public-private sector international collaboration.

    Science.gov (United States)

    Bronnenkant, L

    1994-01-01

    A representative of Finishing Enterprises, the world's largest manufacturer of intrauterine contraceptive devices (IUDs), discusses how to alter the balance of incentives-disincentives to expedite the development of HIV vaccines for international evaluation. Three main disincentives exist for private manufacturers in the United States to develop a new HIV vaccine to be used in developing countries, outside the profitable North American and western European markets: 1) low profit margin because of limited money, time, and resources. Medium and large-sized corporations are more concerned with a high return on their investment owing to stockholder pressure than with the human benefit of that investment. 2) Lengthy regulatory approval process. The current regulatory process in the US is tedious, time-consuming, and costly. 3) Liability risk. The United States is the most litigious society in the world. Suits filed against US corporations involved in drug manufacture incur legal defence costs, which make an already low profit margin HIV vaccine even lower. Finishing Enterprises' IUD program aimed at providing the safest and most effective IUD at an affordable price in a socially responsible way. The Population Council developed the Copper T and retained the patent rights. They and other international health authorities, such as the World Health Organization, conducted or monitored international clinical trials to determine safety and efficacy. Private foundations and public donor agencies funded these activities. When donor agencies committed to volume purchases for their commodity programs, Finishing Enterprises could commit to volume pricing. Whenever high-margin private sector sales occur, Population Council receives a royalty payment. Thus, the disincentives were overcome: 1) Low profit margin was less an issue for a small, private company created specifically to manufacture IUDs and guaranteed volume orders. 2) Lengthy regulatory approval processes were avoided by

  5. Hepatic (Liver) Function Panel

    Science.gov (United States)

    ... Educators Search English Español Blood Test: Hepatic (Liver) Function Panel KidsHealth / For Parents / Blood Test: Hepatic (Liver) ... kidneys ) is working. What Is a Hepatic (Liver) Function Panel? A liver function panel is a blood ...

  6. Comprehensive metabolic panel

    Science.gov (United States)

    Metabolic panel - comprehensive; Chem-20; SMA20; Sequential multi-channel analysis with computer-20; SMAC20; Metabolic panel 20 ... Chernecky CC, Berger BJ. Comprehensive metabolic panel (CMP) - blood. In: ... Tests and Diagnostic Procedures . 6th ed. St Louis, MO: ...

  7. Summary of contribution to the ICANS-X panel discussion

    International Nuclear Information System (INIS)

    Crawford, K.

    1989-01-01

    In general, users don't care about the source characteristics or even the type of source--what they care about is the performance of specific instruments for specific experiments. It is the instrument designers who dictate what source characteristics are necessary or desirable to achieve specific levels of instrument performance. From an instrument designer's point of view, the time-structure (pulse shape and repetition frequency) of the source and the time-averaged intensity as a function of wavelength are the two most important source parameters. Clearly, the source time-structure is of fundamental importance to those instruments based on traditional time-of-flight techniques. However, source time-structure can also be of considerable importance to some instruments that traditionally have been operated in a steady-state mode. If new sources are being designed, some of these traditional techniques should be reexamined from this point of view. Many instruments are now operated with a less-than-optimum source time-structure and could achieve significant performance improvements if the source time-structure were optimized. Consider, for example, the small-angle scattering instruments currently operating at pulsed spallation neutron sources. For these instruments, the pulses are typically much narrower than required, so lengthening the pulses could lead to significant gains in data rates with no appreciable loss in resolution. Another example is the triple-axis spectrometers, which have been so important at steady-state sources. One of the great advantages of pulsed sources is the flexibility they provide in optimizing source time-structure and intensity-vs-wavelength characteristics. Moderators can be cold, hot, small and decoupled, or large and coupled

  8. Summary of contribution to the ICANS-X panel discussion

    International Nuclear Information System (INIS)

    Taylor, A.D.

    1989-01-01

    Users are a nuisance, but they are essential to ensure the long-term funding and optimum utilization of research facilities as expensive as advanced neutron sources. The typical user wants ten times more flux, ten times better resolution and ten times more beam time. But the history of neutron scattering shows that advances are instrument-let rather than science-led. This is perhaps inevitable in a field such as condensed matter studies where neutron scattering is but one (albeit a very important one) of the techniques available. The current generation of accelerator-based pulsed neutron sources represent one such major advance giving significant improvements in resolution (from the sharpness of the pulses) and signal-to-noise (from the time discrimination of fast and thermal neutron). Source reliability at greater than the 80% level is essential for efficient scheduling of a user program, and that has now been shown to be achievable. Powerful computing tools are also essential to allow the user to extract the meaningful information from the deluge of data, and these will continue to be developed in a user friendly way. For the next generation neutron source, the newly discovered advantages of the high resolution, sharp pulse spallation sources should be combined with the experience built up over the years on steady state sources. The SDI program has shown that the current generation of accelerators are nowhere near their technological limit. A relatively modest increase in proton current, to say 1-2 mA, would not only boost the performance of traditional time-of-flight instruments but also give sufficient flux from an unpoisoned moderator to compete effectively as a steady state source whilst retaining all the advantages of a pulsed source. Incorporation of time discrimination for order and background suppression on a triple-axis crystal spectrometer is a truly exciting prospect

  9. TU-CD-213-04: Panel Discussion

    International Nuclear Information System (INIS)

    Johnson, J.

    2015-01-01

    As part of the AAPM’s Scope of Practice, medical physicists are expected to collaborate effectively with practioners and allied health care providers. Interpersonal skills such as communication, negotiation and persuasion are vital for successful collaboration to achieve shared goals. This session will provide some theoretical background of these interpersonal skills as well as specific techniques and practical tools to influence others. Applications of these interpersonal skills for administrative and human resource management purposes vital to medical physicists will be shared. Session attendees will gain knowledge and tools to help them effectively collaborate with administrative and physician leaders in areas such as capital and human resource selection, prioritization, and implementation. Participants will hear methods of how to articulate their goals and to understand the goals of administration, helping ensure alignment of purpose. Session speakers will present one of the topics: equipment selection, budget creation, contracts, and program-related policy development. Specifics may include designing a business case in language that administrators understand, calculating the prioritization of budget requests, and influencing policies for safe and effective care. Human resource topics may include staffing justification, recruitment for fit, employment contracts, and benefits. Speakers will provide examples in both radiation therapy and diagnostic imaging departments and will share experiences and outcomes of their approaches for better results. Learning Objectives: After this course attendees will be better able to Understand the shared goal between administrative and physicist leadership. Articulate the “why” of the technical or human resource need. Utilize communication, negotiation and persuasion tools to improve collaboration

  10. TU-CD-213-04: Panel Discussion

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, J. [MD Anderson Cancer Center (United States)

    2015-06-15

    As part of the AAPM’s Scope of Practice, medical physicists are expected to collaborate effectively with practioners and allied health care providers. Interpersonal skills such as communication, negotiation and persuasion are vital for successful collaboration to achieve shared goals. This session will provide some theoretical background of these interpersonal skills as well as specific techniques and practical tools to influence others. Applications of these interpersonal skills for administrative and human resource management purposes vital to medical physicists will be shared. Session attendees will gain knowledge and tools to help them effectively collaborate with administrative and physician leaders in areas such as capital and human resource selection, prioritization, and implementation. Participants will hear methods of how to articulate their goals and to understand the goals of administration, helping ensure alignment of purpose. Session speakers will present one of the topics: equipment selection, budget creation, contracts, and program-related policy development. Specifics may include designing a business case in language that administrators understand, calculating the prioritization of budget requests, and influencing policies for safe and effective care. Human resource topics may include staffing justification, recruitment for fit, employment contracts, and benefits. Speakers will provide examples in both radiation therapy and diagnostic imaging departments and will share experiences and outcomes of their approaches for better results. Learning Objectives: After this course attendees will be better able to Understand the shared goal between administrative and physicist leadership. Articulate the “why” of the technical or human resource need. Utilize communication, negotiation and persuasion tools to improve collaboration.

  11. Conflict resolution: panel discussion and questions from the audience

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    Several questions were raised following the speakers' presentations. The question arose as to whether Congress should have let the 1986 milestone in the original Act occur, rather than drafting the Amendments Act in an effort to alleviate a potential problem. Generally, response held that allowing things to run their course would have raised pertinent issues, caused conflict, and ultimately resulted in negotiation and compromise. A question was raised about managing the transition from public involvement and participation to actual negotiations. The speakers responded that negotiation is a necessary step after informing the public. Letting people vent their frustrations is important but does not solve the problems. Controversy can result from public participation as easily as may consensus, because of value disagreements. The next step is to bargain and negotiate after the information is shared. The speakers were then asked how they felt about enforced (by state statute) mediation. All speakers responding felt that by building in mandatory mediation, the process is hurt more than helped. Mediation only works if all parties want it

  12. Thematic report on the conference and panel discussion

    International Nuclear Information System (INIS)

    Amold, N.; Brodowski, R.; Gepp, C.; Giersch, M.; Gufler, K.; Lahodynsky, R.; Hellermschmidt-Alber, J.

    2010-01-01

    The Viennese Environmental Prosecutor's Office as nuclear protection commissioner of the city of Vienna is engaged with all aspects of nuclear energy and its hazards. Nuclear energy is in a minority of states used for energy production and in even less cases, it contributes to a short-term share of the energy supply. These conditions - in addition to the acute consideration of operational safety - are the Request of Questioning the use of nuclear energy in principle. In the light of the general raw materials debate - a conference on uranium was organized. Just over two percent of the global energy demand is covered by nuclear energy and nevertheless, a fuel debate similar to that of fossil fuels - which cover more than 80 percent of the energy demand - arose. Therefore some questions arise: It can be seen that in a hypothetical - still very low - nuclear energy's share of five percent, the range of nuclear fuel would sink on about the half. Due to the small amount that nuclear energy contributes to Energy supply and due to CO2 emissions throughout the process of at least about 30 g / kWh (also set by nuclear energy supporters), the Climate protection argument for nuclear energy is in a very questionable light. The event and the present report show that the issue of uranium availability is also a important issue for the nuclear industry. Not least for this reason, despite little progress since the 1960s, alternatives to existing reactor concepts and fuels are being researched. The purpose of this report is to provide insight into commodity forecasting and availability. It also takes a quick look at the enormous problems posed by uranium mining to the environment and the people involved. In addition, it will be shown where the border between the wishful thinking of the various actors and valid data runs. (roessner)

  13. Business planning for license renewal and plant acquisitions. Panel Discussion

    International Nuclear Information System (INIS)

    Quinn, Edward L.; Grimes, Chris; Walters, Doug; Doroshuk, Barth; Gasper, Joe; Salmon, Harry; Bier, Vicki M.; Hagen, Ronald; Richardson, Charles J.

    2001-01-01

    Full text of publication follows: Subsequent to Calvert Cliffs and Oconee license renewals in 2000, many plants have not applied for license renewal. Industry is moving to standardize and streamline the process to make it as efficient and effective as possible. At the same time, it is focusing on business practices and competitiveness of nuclear plants in the long-term market-both under regulated and deregulated state formats. In addition, new acquisitions and consolidation in the nuclear market have created several large owner-operators that have specialized business needs. Speakers with experience in the foregoing facets have been selected from the U.S. Nuclear Regulatory Commission, the Nuclear Energy Institute, and utilities to address the business challenges facing them now and in the future. (authors)

  14. Experimental designs and risk assessment in combination toxicology: Panel discussion

    NARCIS (Netherlands)

    Henschler, D.; Bolt, H.M.; Jonker, D.; Pieters, M.N.; Groten, J.P.

    1996-01-01

    Advancing our knowledge on the toxicology of combined exposures to chemicals and implementation of this knowledge in guidelines for health risk assessment of such combined exposures are necessities dictated by the simple fact that humans are continuously exposed to a multitude of chemicals. A

  15. 76 FR 30231 - Civil Supersonic Aircraft Panel Discussion

    Science.gov (United States)

    2011-05-24

    ... awareness of the continuing technological advancements in supersonic aircraft technology aimed at reducing... Wednesday, April 21, 2010, as part of the joint meeting of the 159th Acoustical Society of America and NOISE... advances in supersonic technology, and for the FAA, the National Aeronautics and Space Administration (NASA...

  16. LGBT Roundtable Discussion: Meet-up and Mentoring Discussion

    Science.gov (United States)

    2014-03-01

    The LGBT+ Physicists group welcomes those who identify as gender sexual minorities, as LGBTQQIAAP+, or as allies to participate in a round-table discussion on mentoring physicists. The session will provide an opportunity to learn and discuss successful mentoring strategies at different career stages for physicists in all environments, including academia, industry, etc. Attendees are encouraged to attend a social event to follow the panel to continue to network. Allies are especially welcome at this event to learn how to support and mentor LGBT+ physicists.

  17. 75 FR 8190 - Art Advisory Panel of the Commissioner of Internal Revenue Service

    Science.gov (United States)

    2010-02-23

    ... function, Panel records and discussions must include tax return information. Therefore, the Panel meetings... balanced between museum directors and curators, art dealers and auction representatives to afford differing...

  18. 75 FR 71787 - Occupational Information Development Advisory Panel Meeting

    Science.gov (United States)

    2010-11-24

    ... disability claims; occupational analysis, including definitions, ratings and capture of physical and mental... activities and the proposed integration with Panel milestones; OIDAP Chair and subcommittee reports; individual and organizational public comment; public comment; Panel discussion and deliberation; and, an...

  19. Risk-based decisionmaking (Panel)

    Energy Technology Data Exchange (ETDEWEB)

    Smith, T.H.

    1995-12-31

    By means of a panel discussion and extensive audience interaction, explore the current challenges and progress to date in applying risk considerations to decisionmaking related to low-level waste. This topic is especially timely because of the proposed legislation pertaining to risk-based decisionmaking and because of the increased emphasis placed on radiological performance assessments of low-level waste disposal.

  20. Touch panel system for control applications

    International Nuclear Information System (INIS)

    Crook, K.; Johnson, R.

    1976-12-01

    The use of finger-sensitive touch panels in association with computer-generated displays for control and monitoring of the Stanford linear accelerator is discussed. This control concept has proven to be very effective. The hardware and software aspects of the Touch Panel portion of the control system are described

  1. Research challenges for energy data management (panel)

    DEFF Research Database (Denmark)

    Pedersen, Torben Bach; Lehner, Wolfgang

    2013-01-01

    This panel paper aims at initiating discussion at the Second International Workshop on Energy Data Management (EnDM 2013) about the important research challenges within Energy Data Management. The authors are the panel organizers, extra panelists will be recruited before the workshop...

  2. Panel 3 Studies in Childhood, Chuldren's Culture and Play Culture

    DEFF Research Database (Denmark)

    Toft, Herdis

    A presentation of the collected Works of Flemming Mouritsen as published in "Mouritsen's Metode'. Herdis Toft as Panel Chair introduces the publication and also the panel of 6 researchers discussing his influence in the field.......A presentation of the collected Works of Flemming Mouritsen as published in "Mouritsen's Metode'. Herdis Toft as Panel Chair introduces the publication and also the panel of 6 researchers discussing his influence in the field....

  3. Uncertainties in predicting solar panel power output

    Science.gov (United States)

    Anspaugh, B.

    1974-01-01

    The problem of calculating solar panel power output at launch and during a space mission is considered. The major sources of uncertainty and error in predicting the post launch electrical performance of the panel are considered. A general discussion of error analysis is given. Examples of uncertainty calculations are included. A general method of calculating the effect on the panel of various degrading environments is presented, with references supplied for specific methods. A technique for sizing a solar panel for a required mission power profile is developed.

  4. Analysis of 3-panel and 4-panel microscale ionization sources

    International Nuclear Information System (INIS)

    Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T.; Piascik, Jeffrey R.; Gilchrist, Kristin H.; Stoner, Brian R.

    2010-01-01

    Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10 -4 to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

  5. Hepatitis virus panel

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/003558.htm Hepatitis virus panel To use the sharing features on this page, please enable JavaScript. The hepatitis virus panel is a series of blood tests used ...

  6. Antinuclear antibody panel

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/003535.htm Antinuclear antibody panel To use the sharing features on this page, please enable JavaScript. The antinuclear antibody panel is a blood test that looks at ...

  7. Paneling architectural freeform surfaces

    KAUST Repository

    Eigensatz, Michael; Kilian, Martin; Schiftner, Alexander; Mitra, Niloy J.; Pottmann, Helmut; Pauly, Mark

    2010-01-01

    with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication

  8. New directions in theory - the panel

    International Nuclear Information System (INIS)

    Miller, G.A.; British Columbia Univ., Vancouver

    1990-01-01

    This is a personalized summary of the panel session of 7 July, 1989. The intent of the session was to discuss important questions in few particle theory. The vigorous participation of the audience was sought and received. (orig.)

  9. Paneling architectural freeform surfaces

    KAUST Repository

    Eigensatz, Michael

    2010-07-26

    The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects. © 2010 ACM.

  10. Paneling architectural freeform surfaces

    KAUST Repository

    Eigensatz, Michael

    2010-07-25

    The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, so-called panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects.

  11. REINFORCED COMPOSITE PANEL

    DEFF Research Database (Denmark)

    2003-01-01

    A composite panel having front and back faces, the panel comprising facing reinforcement, backing reinforcement and matrix material binding to the facing and backing reinforcements, the facing and backing reinforcements each independently comprising one or more reinforcing sheets, the facing rein...... by matrix material, the facing and backing reinforcements being interconnected to resist out-of-plane relative movement. The reinforced composite panel is useful as a barrier element for shielding structures, equipment and personnel from blast and/or ballistic impact damage....

  12. Solar reflection panels

    Science.gov (United States)

    Diver, Jr., Richard B.; Grossman, James W [Albuquerque, NM; Reshetnik, Michael [Boulder, CO

    2006-07-18

    A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

  13. Examining the Doctoral Thesis: A Discussion

    Science.gov (United States)

    Carter, Susan

    2008-01-01

    The examination of doctoral theses controls an important academic threshold, yet practices are often private, codes non-specific, and individuals isolated. This article adds to recent investigation of the examination culture by reporting informal panel discussion amongst a total of 23 University of Auckland (New Zealand) faculty members as to…

  14. Solar panel foundation device

    Energy Technology Data Exchange (ETDEWEB)

    Hawley, W.W.

    1983-03-29

    A transportable solar panel foundation device which has a bottom member, at least one upstanding side member, and an essentially open top. The side members are angled to permit nesting of a plurality of the foundation devices, and reinforcement pads are carried by the foundation device to support legs for one or more solar panels.

  15. RECIPANEL: RECYCLED PAPER PANELS

    Directory of Open Access Journals (Sweden)

    HERNÁN CAÑOLA

    2012-01-01

    Full Text Available En este artículo se estudia la fabricación y el comportamiento mecánico de paneles a base de papel reciclado. El objetivo principal del proyecto es producir un prototipo de panel que emplee elementos provenientes de residuos sólidos (papel periódico y de un material conglomerante (cemento Portland blanco. El panel debe ser económico, debe tener buenas propiedades mecánicas y debe tener dimensiones comerciales para su uso en muros tabiques y en cielos falsos en la industria de la construcción. El Recipanel es un panel no estructural a base de papel reciclado. El Recipanel cumple las normas colombianas en lo relativo a los paneles de uso no estructural y presenta además unas excelentes características mecánicas.

  16. 76 FR 38648 - Availability of the Geothermal Technologies Program Blue Ribbon Panel Report and Request for...

    Science.gov (United States)

    2011-07-01

    ....S. has lagged that of solar and wind energy. The purpose of the Blue Ribbon Panel meeting was to... Geothermal Technologies Program Blue Ribbon Panel Report and Request for Public Comment AGENCY: Office of... Panel (the Panel) on March 22/23, 2011 in Albuquerque, New Mexico for a guided discussion on the future...

  17. Make Your Own Solar Panel.

    Science.gov (United States)

    Suzuki, David

    1992-01-01

    Presents an activity in which students make a simulated solar panel to learn about the principles behind energy production using solar panels. Provides information about how solar panels function to produce energy. (MCO)

  18. To discuss illicit nuclear trafficking

    Energy Technology Data Exchange (ETDEWEB)

    Balatsky, Galya I [Los Alamos National Laboratory; Severe, William R [Los Alamos National Laboratory; Wallace, Richard K [Los Alamos National Laboratory

    2010-01-01

    The Illicit nuclear trafficking panel was conducted at the 4th Annual INMM workshop on Reducing the Risk from Radioactive and Nuclear Materials on February 2-3, 2010 in Washington DC. While the workshop occurred prior to the Nuclear Security Summit, April 12-13 2010 in Washington DC, some of the summit issues were raised during the workshop. The Communique of the Washington Nuclear Security Summit stated that 'Nuclear terrorism is one of the most challenging threats to international security, and strong nuclear security measures are the most effective means to prevent terrorists, criminals, or other unauthorized actors from acquiring nuclear materials.' The Illicit Trafficking panel is one means to strengthen nuclear security and cooperation at bilateral, regional and multilateral levels. Such a panel promotes nuclear security culture through technology development, human resources development, education and training. It is a tool which stresses the importance of international cooperation and coordination of assistance to improve efforts to prevent and respond to incidents of illicit nuclear trafficking. Illicit trafficking panel included representatives from US government, an international organization (IAEA), private industry and a non-governmental organization to discuss illicit nuclear trafficking issues. The focus of discussions was on best practices and challenges for addressing illicit nuclear trafficking. Terrorism connection. Workshop discussions pointed out the identification of terrorist connections with several trafficking incidents. Several trafficking cases involved real buyers (as opposed to undercover law enforcement agents) and there have been reports identifying individuals associated with terrorist organizations as prospective plutonium buyers. Some specific groups have been identified that consistently search for materials to buy on the black market, but no criminal groups were identified that specialize in nuclear materials or isotope

  19. Blue Ribbon Panel Report

    Science.gov (United States)

    An NCI Cancer Currents blog by the NCI acting director thanking the cancer community for contributing to the Cancer Moonshot Blue Ribbon Panel report, which was presented to the National Cancer Advisory Board on September 7.

  20. Panel acoustic contribution analysis.

    Science.gov (United States)

    Wu, Sean F; Natarajan, Logesh Kumar

    2013-02-01

    Formulations are derived to analyze the relative panel acoustic contributions of a vibrating structure. The essence of this analysis is to correlate the acoustic power flow from each panel to the radiated acoustic pressure at any field point. The acoustic power is obtained by integrating the normal component of the surface acoustic intensity, which is the product of the surface acoustic pressure and normal surface velocity reconstructed by using the Helmholtz equation least squares based nearfield acoustical holography, over each panel. The significance of this methodology is that it enables one to analyze and rank relative acoustic contributions of individual panels of a complex vibrating structure to acoustic radiation anywhere in the field based on a single set of the acoustic pressures measured in the near field. Moreover, this approach is valid for both interior and exterior regions. Examples of using this method to analyze and rank the relative acoustic contributions of a scaled vehicle cabin are demonstrated.

  1. Autoimmune liver disease panel

    Science.gov (United States)

    Liver disease test panel - autoimmune ... Autoimmune disorders are a possible cause of liver disease. The most common of these diseases are autoimmune hepatitis and primary biliary cholangitis (formerly called primary biliary cirrhosis). This group of tests ...

  2. Hexagon solar power panel

    Science.gov (United States)

    Rubin, I. (Inventor)

    1978-01-01

    A solar energy panel support is described upon which silicon cells are arrayed. The cells are wafer thin and of two geometrical types, both of the same area and electrical rating, namely hexagon cells and hourglass cells. The hourglass cells are composites of half hexagons. A near perfect nesting relationship of the cells achieves a high density packing whereby optimum energy production per panel area is achieved.

  3. Propulsion Systems Panel deliberations

    Science.gov (United States)

    Bianca, Carmelo J.; Miner, Robert; Johnston, Lawrence M.; Bruce, R.; Dennies, Daniel P.; Dickenson, W.; Dreshfield, Robert; Karakulko, Walt; Mcgaw, Mike; Munafo, Paul M.

    1993-01-01

    The Propulsion Systems Panel was established because of the specialized nature of many of the materials and structures technology issues related to propulsion systems. This panel was co-chaired by Carmelo Bianca, MSFC, and Bob Miner, LeRC. Because of the diverse range of missions anticipated for the Space Transportation program, three distinct propulsion system types were identified in the workshop planning process: liquid propulsion systems, solid propulsion systems and nuclear electric/nuclear thermal propulsion systems.

  4. Honeycomb metal panel

    International Nuclear Information System (INIS)

    1979-01-01

    Product constituted by a honeycomb metal panel that can be employed to advantage for manufacturing lagging by sandwiching it between two plane sheets, utilized in particular in the nuclear industry where lagging has to have a very long life strength. The honeycomb metal panel is made of an expanded metal extrusion previously cut so as to form, after additional drawing, a honeycomb structure with square or rectangular cells with a plane surface [fr

  5. The effect of oblique angle of sound incidence, realistic edge conditions, curvature and in-plane panel stresses on the noise reduction characteristics of general aviation type panels

    Science.gov (United States)

    Grosveld, F.; Lameris, J.; Dunn, D.

    1979-01-01

    Experiments and a theoretical analysis were conducted to predict the noise reduction of inclined and curved panels. These predictions are compared to the experimental results with reasonable agreement between theory and experiment for panels under an oblique angle of sound incidence. Theoretical as well as experimental results indicate a big increase in noise reduction when a flat test panel is curved. Further curving the panel slightly decreases the noise reduction. Riveted flat panels are shown to give a higher noise reduction in the stiffness-controlled frequency region, while bonded panels are superior in this region when the test panel is curved. Experimentally measured noise reduction characteristics of flat aluminum panels with uniaxial in-plane stresses are presented and discussed. These test results indicate an important improvement in the noise reduction of these panels in the frequency range below the fundamental panel/cavity frequency.

  6. Seismic hazard analysis. Review panel, ground motion panel, and feedback results

    International Nuclear Information System (INIS)

    Bernreuter, D.L.

    1981-10-01

    The Site Specific Spectra Project (SSSP) was a multi-year study funded by the U.S. Nuclear Regulatory Commission to provide estimates of the seismic hazards at a number of nuclear power plant sites in the Eastern U.S. A key element of our approach was the Peer Review Panel, which we formed in order to ensure that our use of expert opinion was reasonable. We discuss the Peer Review Panel results and provide the complete text of each member's report. In order to improve the ground motion model, an Eastern U.S. Ground Motion Model Panel was formed. In Section 4 we tabulate the responses from the panel members to our feedback questionnaire and discuss the implications of changes introduced by them. We conclude that the net difference in seismic hazard values from those presented in Volume 4 is small and does not warrant a reanalysis. (author)

  7. Reflecting variable opening insulating panel

    International Nuclear Information System (INIS)

    Nungesser, W.T.

    1976-01-01

    A description is given of a reflecting variable opening insulating panel assembly, comprising a static panel assembly of reflecting insulation sheets forming a cavity along one side of the panel and a movable panel opening out by sliding from the cavity of the static panel, and a locking device for holding the movable panel in a position extending from the cavity of the static panel. This can apply to a nuclear reactor of which the base might require maintenance and periodical checking and for which it is desirable to have available certain processes for the partial dismantling of the insulation [fr

  8. Discussion in Postsecondary Classrooms

    Directory of Open Access Journals (Sweden)

    Curt Dudley-Marling

    2013-11-01

    Full Text Available Spoken language is, arguably, the primary means by which teachers teach and students learn. Much of the literature on language in classrooms has focused on discussion that is seen as both a method of instruction and a curricular outcome. While much of the research on discussion has focused on K-12 classrooms, there is also a body of research examining the efficacy of discussion in postsecondary settings. This article provides a review of this literature in order to consider the effect of discussion on student learning in college and university classrooms, the prevalence of discussion in postsecondary settings, and the quality of discussion in these settings. In general, the results of research on the efficacy of discussion in postsecondary settings are mixed. More seriously, researchers have not been explicit about the meaning of discussion and much of what is called discussion in this body of research is merely recitation with minimal levels of student participation. Although the research on discussion in college and university classrooms is inconclusive, some implications can be drawn from this review of the research including the need for future researchers to clearly define what they mean by “discussion.”

  9. Rational Design of Composite Panels

    DEFF Research Database (Denmark)

    Riber, Hans Jørgen

    1996-01-01

    A non-linear structural model for composite panels is presented. The non-linear terms in the lateral displacements are modelled as an additional set of lateral loads acting on the panel. Hence the solution is reduced to that of an equivalent panel with small displacements In order to treat sandwich...... Norske Veritas', DNV, building rules concerning high-speed light craft, in which the panel scantlings are often restricted by a maximum lateral deflection connected with the panel span....

  10. Panels of microporous insulation

    Energy Technology Data Exchange (ETDEWEB)

    McWilliams, J.A.; Morgan, D.E.; Jackson, J.D.J.

    1990-08-07

    Microporous thermal insulation materials have a lattice structure in which the average interstitial dimension is less than the mean free path of the molecules of air or other gas in which the material is arranged. This results in a heat flow which is less than that attributable to the molecular heat diffusion of the gas. According to this invention, a method is provided for manufacturing panels of microporous thermal insulation, in particular such panels in which the insulation material is bonded to a substrate. The method comprises the steps of applying a film of polyvinyl acetate emulsion to a non-porous substrate, and compacting powdery microporous thermal insulation material against the film so as to cause the consolidated insulation material to bond to the substrate and form a panel. The polyvinyl acetate may be applied by brushing or spraying, and is preferably allowed to dry prior to compacting the insulation material. 1 fig.

  11. Encouraging Classroom Discussion

    Directory of Open Access Journals (Sweden)

    Robert Joseph McKee

    2014-10-01

    Full Text Available Classroom discussion has the potential to enhance the learning environment and encourages students to become active participants in the educational process. Student participation in classroom discussion has been shown to significantly improve the student learning experience. Research suggests that classroom discussion is an effective method for encouraging student classroom participation and for motivating student learning beyond the classroom. Participation in classroom discussion encourages students to become active collaborators in the learning process, while at the same time providing instructors with a practical method of assessing student learning. Classroom discussion is an effective tool for developing higher-level cognitive skills like critical thinking. Despite the potential discussion holds for student learning, many in academia lament the lack of participation in the classroom. The lack of student participation in classroom discussion is not a recent problem; it is one that has frustrated instructors for decades. Instructors report that some of the more current methods for encouraging classroom discussion can be exasperating and at times non-productive. This two-year study of 510 college and university students provides insight into the reasons why some students do not participate in classroom discussion. This study, which also elicited input from sixteen college and university professors and two high school teachers, offers some suggestions for creating and encouraging an environment conducive to student participation in the classroom.

  12. Advanced solar panel designs

    Science.gov (United States)

    Ralph, E. L.; Linder, E.

    1995-01-01

    This paper describes solar cell panel designs that utilize new hgih efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an a analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

  13. Panel 3 - characterization

    Energy Technology Data Exchange (ETDEWEB)

    Erck, R.A.; Erdemir, A.; Janghsing Hsieh; Lee, R.H.; Xian Zheng Pan; Deming Shu [Argonne National Lab., IL (United States); Feldman, A. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Glass, J.T. [North Carolina State Univ., Raleigh (United States); Kleimer, R. [Coors Ceramics Co., Golden, CO (United States); Lawton, E.A. [JPL/Caltech, Pasadena, CA (United States); McHargue, C.J. [Univ. of Tennessee, Knoxville (United States)

    1993-01-01

    The task of this panel was to identify and prioritize needs in the area of characterization of diamond and diamond-like-carbon (DLC) films for use in the transportation industry. Until recent advances in production of inexpensive films of diamonds and DLC, it was not feasible that these materials could be mass produced. The Characterization Panel is restricting itself to identifying needs in areas that would be most useful to manufacturers and users in producing and utilizing diamond and DLC coatings in industry. These characterization needs include in-situ monitoring during growth, relation of structure to performance, and standards and definitions.

  14. Learning through Discussions

    Science.gov (United States)

    Ellis, Robert A.; Calvo, Rafael; Levy, David; Tan, Kelvin

    2004-01-01

    Students studying a third-year e-commerce subject experienced face-to-face and online discussions as an important part of their learning experience. The quality of the students' experiences of learning through those discussions is investigated in this study. This study uses qualitative approaches to investigate the variation in the students'…

  15. Heavy water lattices: Second panel report

    Energy Technology Data Exchange (ETDEWEB)

    1963-09-15

    The panel was attended by prominent physicists from most of the laboratories engaged in the field of heavy water lattices throughout the world. The participants presented written contributions and status reports describing the past history and plans for further development of heavy-water reactors. Valuable discussions took place, during which recommendations for future work were formulated. Refs, figs, tabs.

  16. Heavy water lattices: Second panel report

    International Nuclear Information System (INIS)

    1963-01-01

    The panel was attended by prominent physicists from most of the laboratories engaged in the field of heavy water lattices throughout the world. The participants presented written contributions and status reports describing the past history and plans for further development of heavy-water reactors. Valuable discussions took place, during which recommendations for future work were formulated. Refs, figs, tabs

  17. Identification of Macroeconomic Factors in Large Panels

    DEFF Research Database (Denmark)

    Bork, Lasse; Dewachter, Hans; Houssa, Romain

    standard practices in the SVAR literature. Estimators based on the EM algorithm are developped. We apply this framework to a large panel of US monthly macroeconomic series. In particular, we identify nine macroeconomic factors and discuss the economic impact of monetary policy stocks. The results...

  18. Panel - Rio Grande restoration: Future directions

    Science.gov (United States)

    Deborah M. Finch; Pete V. Domenici; Jeffrey. C. Whitney; Steve Harris; Brian Shields; Clifford S. Crawford

    1996-01-01

    The purpose of this panel was to discuss historical and current changes to the Rio Grande system, focusing on the middle Basin, and to present and review different individual, organizational, and political perspectives on the future of the system. Invitations were made to panelists based on their past and current interests and activities pertaining to restoration of...

  19. Continuous time modeling of panel data by means of SEM

    NARCIS (Netherlands)

    Oud, J.H.L.; Delsing, M.J.M.H.; Montfort, C.A.G.M.; Oud, J.H.L.; Satorra, A.

    2010-01-01

    After a brief history of continuous time modeling and its implementation in panel analysis by means of structural equation modeling (SEM), the problems of discrete time modeling are discussed in detail. This is done by means of the popular cross-lagged panel design. Next, the exact discrete model

  20. Advanced Solar Panel Designs

    Science.gov (United States)

    Ralph, E. L.; Linder, E. B.

    1995-01-01

    Solar panel designs that utilize new high-efficiency solar cells and lightweight rigid panel technologies are described. The resulting designs increase the specific power (W/kg) achievable in the near-term and are well suited to meet the demands of higher performance small satellites (smallsats). Advanced solar panel designs have been developed and demonstrated on two NASA SBIR contracts at Applied Solar. The first used 19% efficient, large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells with a lightweight rigid graphite epoxy isogrid substrate configuration. A 1,445 sq cm coupon was fabricated and tested to demonstrate 60 W/kg with a high potential of achieving 80 W/kg. The second panel design used new 22% efficiency, dual-junction GaInP2/GaAs/Ge solar cells combined with a lightweight aluminum core/graphite fiber mesh facesheet substrate. A 1,445 sq cm coupon was fabricated and tested to demonstrate 105 W/kg with the potential of achieving 115 W/kg.

  1. INTERNATIONAL COLLABORATION: Panelling

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    At the meeting of the International Committee for Future Accelerators (ICFA), in Geneva in July, Chairman A.N. Skrinsky of Novosibirsk reviewed ICFA progress, particularly the activities of the specialist Panels which pursue specific Committee objectives in guiding worldwide collaboration in high energy physics

  2. INTERNATIONAL COLLABORATION: Panelling

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1991-10-15

    At the meeting of the International Committee for Future Accelerators (ICFA), in Geneva in July, Chairman A.N. Skrinsky of Novosibirsk reviewed ICFA progress, particularly the activities of the specialist Panels which pursue specific Committee objectives in guiding worldwide collaboration in high energy physics.

  3. Paneling architectural freeform surfaces

    KAUST Repository

    Eigensatz, Michael; Kilian, Martin; Schiftner, Alexander; Mitra, Niloy J.; Pottmann, Helmut; Pauly, Mark

    2010-01-01

    The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a

  4. Photovoltaic-Panel Laminator

    Science.gov (United States)

    Keenan, R.

    1985-01-01

    Two-piece unit heats and presses protective layers to form laminate. Rubber diaphragm between upper and lower vacuum chambers alternates between neutral position and one that presses against solar-cell array, supplying distributed force necessary to press layers of laminate together. Encapsulation helps to protect cells from environment and to ensure long panel life while allowing efficient generation of electricity from Sunlight.

  5. Composite panel development at JPL

    Science.gov (United States)

    Mcelroy, Paul; Helms, Rich

    1988-01-01

    Parametric computer studies can be use in a cost effective manner to determine optimized composite mirror panel designs. An InterDisciplinary computer Model (IDM) was created to aid in the development of high precision reflector panels for LDR. The materials properties, thermal responses, structural geometries, and radio/optical precision are synergistically analyzed for specific panel designs. Promising panels designs are fabricated and tested so that comparison with panel test results can be used to verify performance prediction models and accommodate design refinement. The iterative approach of computer design and model refinement with performance testing and materials optimization has shown good results for LDR panels.

  6. Aerospace Safety Advisory Panel

    Science.gov (United States)

    1999-01-01

    This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a five-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASA's safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are 'one deep.' The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting 'brain drain' could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. The major NASA programs are also limited in their ability to plan property for the future. This is of particular concern for the Space Shuttle and ISS because these programs are scheduled to operate well into the next century. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has

  7. Global status of recycling waste solar panels: A review.

    Science.gov (United States)

    Xu, Yan; Li, Jinhui; Tan, Quanyin; Peters, Anesia Lauren; Yang, Congren

    2018-05-01

    With the enormous growth in the development and utilization of solar-energy resources, the proliferation of waste solar panels has become problematic. While current research into solar panels has focused on how to improve the efficiency of the production capacity, the dismantling and recycling of end-of-life (EOL) panels are seldom considered, as can be seen, for instance, in the lack of dedicated solar-panel recycling plants. EOL solar-panel recycling can effectively save natural resources and reduce the cost of production. To address the environmental conservation and resource recycling issues posed by the huge amount of waste solar panels regarding environmental conservation and resource recycling, the status of the management and recycling technologies for waste solar panels are systemically reviewed and discussed in this article. This review can provide a quantitative basis to support the recycling of PV panels, and suggests future directions for public policy makers. At present, from the technical aspect, the research on solar panel recovery is facing many problems, and we need to further develop an economically feasible and non-toxic technology. The research on solar photovoltaic panels' management at the end of life is just beginning in many countries, and there is a need for further improvement and expansion of producer responsibility. Copyright © 2018 Elsevier Ltd. All rights reserved.

  8. Session 1 - discussion

    International Nuclear Information System (INIS)

    Wells, C.; Richards, K.M.; McKerrow, J.F.

    1991-01-01

    This discussion session of the Landfill Gas-Energy and Environment 90 Conference covered the landfill gas potential, the setting up of the Non-Fossil Fuel Obligation; anticipated developments in the post 1998 period, the problem of smell for those who live near a landfill, and the length of time a landfill site is productive in terms of gas evolution. Relevant regulations in California are briefly discussed. (author)

  9. Pantex Falling Man - Independent Review Panel Report.

    Energy Technology Data Exchange (ETDEWEB)

    Brannon, Nathan Gregory; L. Bertolini, N. Brannon, J. Olsen, B. Price, M. Steinzig, R. Wardle, & M. Winfield

    2014-11-01

    Consolidated Nuclear Security (CNS) Pantex took the initiative to organize a Review Panel of subject matter experts to independently assess the adequacy of the Pantex Tripping Man Analysis methodology. The purpose of this report is to capture the details of the assessment including the scope, approach, results, and detailed Appendices. Along with the assessment of the analysis methodology, the panel evaluated the adequacy with which the methodology was applied as well as congruence with Department of Energy (DOE) standards 3009 and 3016. The approach included the review of relevant documentation, interactive discussion with Pantex staff, and the iterative process of evaluating critical lines of inquiry.

  10. Layout of 'hard' and 'soft' control panels

    International Nuclear Information System (INIS)

    Schulz, K.A.

    1984-01-01

    Large control panels, containing hundreds of indicators and controls, have long been used in process plants. The general arrangement of instruments on the panel should reflect ergonomic principles to help operators to quickly and accurately locate, identify and select controls and displays as they monitor and supervise plant systems and processes. For the multiplexed systems now displacing dedicated components, there is a corresponding set of design problems involving display-page formats and the design of display ensembles. A list of alternative organizing principles is presented, with particular emphasis on those based on plant function. Methodologies for selecting and applying the principles are discussed

  11. Panel and planar experimental shear behavior of wood panels ...

    African Journals Online (AJOL)

    Panel shear strength along the thickness and planar shear along the length of wood panels laminated softwood oriented OSB 10 mm thick, conditioned at different moisture contents (anhydrous medium, ambient temperature and humid medium) was measured on standardized test specimens, cut in half lengthwise panel ...

  12. Summary of group discussions

    International Nuclear Information System (INIS)

    2009-01-01

    A key aspect of the workshop was the interaction and exchange of ideas and information among the 40 participants. To facilitate this activity the workshop participants were divided into five discussions groups. These groups reviewed selected subjects and reported back to the main body with summaries of their considerations. Over the 3 days the 5 discussion groups were requested to focus on the following subjects: the characteristics and capabilities of 'good' organisations; how to ensure sufficient resources; how to ensure competence within the organisation; how to demonstrate organisational suitability; the regulatory oversight processes - including their strengths and weaknesses. A list of the related questions that were provided to the discussion groups can be found in Appendix 3. Also included in Appendix 3 are copies of the slides the groups prepared that summarised their considerations

  13. Focus group discussions

    CERN Document Server

    Hennink, Monique M

    2014-01-01

    The Understanding Research series focuses on the process of writing up social research. The series is broken down into three categories: Understanding Statistics, Understanding Measurement, and Understanding Qualitative Research. The books provide researchers with guides to understanding, writing, and evaluating social research. Each volume demonstrates how research should be represented, including how to write up the methodology as well as the research findings. Each volume also reviews how to appropriately evaluate published research. Focus Group Discussions addresses the challenges associated with conducting and writing focus group research. It provides detailed guidance on the practical and theoretical considerations in conducting focus group discussions including: designing the discussion guide, recruiting participants, training a field team, moderating techniques and ethical considerations. Monique Hennink describes how a methodology section is read and evaluated by others, such as journal reviewers or ...

  14. Plutonium roundtable discussion

    International Nuclear Information System (INIS)

    Penneman, R.A.

    1982-01-01

    The roundtable discussion began with remarks by the chairman who pointed out the complicated nature of plutonium chemistry. Judging from the papers presented at this symposium, he noticed a pattern which indicated to him the result of diminished funding for investigation of basic plutonium chemistry and funding focused on certain problem areas. Dr. G.L. silver pointed to plutonium chemists' erroneous use of a simplified summary equation involving the disproportionation of Pu(EV) and their each of appreciation of alpha coefficients. To his appreciation of alpha coefficients. To his charges, Dr. J.T. Bell spoke in defense of the chemists. This discussion was followed by W.W. Schulz's comments on the need for experimental work to determine solubility data for plutonium in its various oxidation states under geologic repository conditions. Discussion then turned to plutonium pyrachemical process with Dana C. Christensen as the main speaker. This paper presents edited versions of participants' written version

  15. FEMA DFIRM Panel Scheme Polygons

    Data.gov (United States)

    Minnesota Department of Natural Resources — This layer contains information about the Flood Insurance Rate Map (FIRM) panel areas. The spatial entities representing FIRM panels are polygons. The polygon for...

  16. Report of Industry Panel Group

    Science.gov (United States)

    Gallimore, Simon; Gier, Jochen; Heitland, Greg; Povinelli, Louis; Sharma, Om; VandeWall, Allen

    2006-01-01

    A final report is presented from the industry panel group. The contents include: 1) General comments; 2) Positive progress since Minnowbrook IV; 3) Industry panel outcome; 4) Prioritized turbine projects; 5) Prioritized compressor projects; and 6) Miscellaneous.

  17. Mounting clips for panel installation

    Science.gov (United States)

    Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph

    2017-07-11

    A photovoltaic panel mounting clip comprising a base, central indexing tabs, flanges, lateral indexing tabs, and vertical indexing tabs. The mounting clip removably attaches one or more panels to a beam or the like structure, both mechanically and electrically. It provides secure locking of the panels in all directions, while providing guidance in all directions for accurate installation of the panels to the beam or the like structure.

  18. Discussion on nuclear issues

    International Nuclear Information System (INIS)

    Andrlova, Z.

    2012-01-01

    Treatment of the radioactive waste and utilisation of the ionisation radiation. Interesting contributions to two topics appeared in conference of Slovak Nuclear Society in Casta-Papiernicka in May 2012. The members from the female section 'Women in nuclear sector; were discussing in particular of the mind-set of Europeans to radioactive waste and novelties in nuclear medicine. (author)

  19. Summary of discussion

    International Nuclear Information System (INIS)

    2006-01-01

    This document provides summaries of the discussions occurred during the second international workshop on the indemnification of nuclear damage. It concerns the second accident scenario: a fire on board of a ship transporting enriched uranium hexafluoride along the Danube River. (A.L.B.)

  20. Discussion 2: David Dobbs

    OpenAIRE

    Dobbs, David; Murray-Rust, Peter; Hatcher, Jordan; Pollock, Rufus

    2010-01-01

    David Dobbs writes on science, medicine and culture. He has contributed to a diversity of publications, including Scientific American, Slate magazine, Wired, Audubon, Atlantic Monthly, and the New York Times magazine. He has also authored a number of books. Other participants in this discussion were Peter Murray-Rust, Jordan Hatcher, and Rufus Pollock.

  1. Summary and Discussion.

    Science.gov (United States)

    Hetherington, E. Mavis

    1992-01-01

    Summarizes and discusses results of the longitudinal study that comprises this monograph issue. Results concern: (1) marital, parent-child, and sibling relationships in families with single and remarried mothers; (2) the relationship between parenting style and adolescent adjustment; and (3) the relationship between marital transitions and…

  2. WORKSHOP: Discussion, debate, deliberation

    NARCIS (Netherlands)

    Jeliazkova, Margarita I.

    2014-01-01

    Discussing, deliberating and debating are a core part of any democratic process. To organise these processes well, a great deal of knowledge and skill is required. It is not simple to find a good balance between a number of elements: appropriate language and terminology; paying attention to solid

  3. Experience with citizens panels

    International Nuclear Information System (INIS)

    Selwyn, J.

    2002-01-01

    In May 1999, 200 delegates attended a four-day UK Consensus Conference on radioactive waste management, which was organised by the UK Centre for Economic and Environmental Development (UK CEED) and supported by the government, industry and environmental groups. The event brought together a Citizens' Panel of fifteen people, randomly selected to represent a cross section of the British public, together with the major players in the debate. The four-day conference saw the panel cross-examine expert witnesses from organisations such as NIREX, British Nuclear Fuels Limited, the Ministry of Defence, Greenpeace and Friends of the Earth. The findings of their investigations were put together in a report containing detailed recommendations for government and industry and presented to the Minister on the final day. (author)

  4. Escape panels in trawls – a consistent management tool?

    DEFF Research Database (Denmark)

    Krag, Ludvig Ahm; Herrmann, Bent; Feekings, Jordan P.

    2016-01-01

    ), saithe (Pollachius virens), haddock (Melanogrammus aeglefinus), plaice (Pleuronectes platessa) and Norway lobster (Nephrops norvegicus). Thus the modification by fishers of certain gear properties not specified in the legislation can significantly influence the efficiency of an escape panel. We discuss...

  5. Discussion with CERN Directorate

    CERN Document Server

    CERN. Geneva

    2017-01-01

    Please note that the Discussion with CERN Directorate will be transmitted also in the following rooms: Council Chamber - 503-1-001 IT Amphitheatre - 31-3-004 Prevessin 774-R-013 Simultaneous interpreting into French and English will be available in the Main Auditorium. Une interprétation simultanée en français et en anglais sera disponible dans l'amphithéâtre principal.

  6. Panel data analysis using EViews

    CERN Document Server

    Agung, I Gusti Ngurah

    2013-01-01

    A comprehensive and accessible guide to panel data analysis using EViews software This book explores the use of EViews software in creating panel data analysis using appropriate empirical models and real datasets. Guidance is given on developing alternative descriptive statistical summaries for evaluation and providing policy analysis based on pool panel data. Various alternative models based on panel data are explored, including univariate general linear models, fixed effect models and causal models, and guidance on the advantages and disadvantages of each one is given. Panel Data Analysis

  7. Lightweight, Thermally Insulating Structural Panels

    Science.gov (United States)

    Eisen, Howard J.; Hickey, Gregory; Wen, Liang-Chi; Layman, William E.; Rainen, Richard A.; Birur, Gajanana C.

    1996-01-01

    Lightweight, thermally insulating panels that also serve as structural members developed. Honeycomb-core panel filled with low-thermal-conductivity, opacified silica aerogel preventing convection and minimizes internal radiation. Copper coating on face sheets reduces radiation. Overall thermal conductivities of panels smaller than state-of-art commercial non-structurally-supporting foam and fibrous insulations. On Earth, panels suitable for use in low-air-pressure environments in which lightweight, compact, structurally supporting insulation needed; for example, aboard high-altitude aircraft or in partially evacuated panels in refrigerators.

  8. Large thermal protection system panel

    Science.gov (United States)

    Weinberg, David J. (Inventor); Myers, Franklin K. (Inventor); Tran, Tu T. (Inventor)

    2003-01-01

    A protective panel for a reusable launch vehicle provides enhanced moisture protection, simplified maintenance, and increased temperature resistance. The protective panel includes an outer ceramic matrix composite (CMC) panel, and an insulative bag assembly coupled to the outer CMC panel for isolating the launch vehicle from elevated temperatures and moisture. A standoff attachment system attaches the outer CMC panel and the bag assembly to the primary structure of the launch vehicle. The insulative bag assembly includes a foil bag having a first opening shrink fitted to the outer CMC panel such that the first opening and the outer CMC panel form a water tight seal at temperatures below a desired temperature threshold. Fibrous insulation is contained within the foil bag for protecting the launch vehicle from elevated temperatures. The insulative bag assembly further includes a back panel coupled to a second opening of the foil bag such that the fibrous insulation is encapsulated by the back panel, the foil bag, and the outer CMC panel. The use of a CMC material for the outer panel in conjunction with the insulative bag assembly eliminates the need for waterproofing processes, and ultimately allows for more efficient reentry profiles.

  9. Discussion Club "Profitable Heritage"

    Directory of Open Access Journals (Sweden)

    Marina Tkacheva

    2017-09-01

    Full Text Available The authors and participants of the project and the expert community analyze the problems related to the realization of a big-scale concept of renovation of the historical center “Irkutsk Quarters”. They discuss preservation of wooden architecture of the city, changes in social functions of the territory, inclusion of the new facilities in the fabric of the area, as well as the problems of the territory’s tourist function and preservation of the identity of Irkutsk downtown.

  10. Empowerment: a conceptual discussion.

    Science.gov (United States)

    Tengland, Per-Anders

    2008-06-01

    The concept of 'empowerment' is used frequently in a number of professional areas, from psychotherapy to social work. But even if the same term is used, it is not always clear if the concept denotes the same goals or the same practice in these various fields. The purpose of this paper is to clarify the discussion and to find a plausible and useful definition of the concept that is suitable for work in various professions. Several suggestions are discussed in the paper, for example control over life or health, autonomy, ability, self-efficacy, self-esteem, and freedom, and it is concluded that there are two plausible complementary uses, one as a goal and one as a process or approach. Empowerment as a goal is to have control over the determinants of one's quality of life, and empowerment as a process is to create a professional relation where the client or community takes control over the change process, determining both the goals of this process and the means to use.

  11. capital. A discussion paper

    Directory of Open Access Journals (Sweden)

    Ewa Chojnacka

    2015-04-01

    Full Text Available The purpose of this study is to confront certain propositions presented in Lesław Niemczyk’s publication Rachunkowość finansowa aktywów kompetencyjnych i kapitału intelektualnego. Nowy dział rachunkowości(Accounting for Competence Assets and Intellectual Capital. A New Area in Accounting with ideas published in other studies. The authors discuss issues concerning firm value, selected definitions of intellectual capital, as well as certain methods of intellectual capital measurement and valuation. Other problems analysed include accounting for and reporting of intellectual capital and similarities and differences between the way those issues are presented in Polish and in international studies as well as in existing legal regulations and standards.

  12. Results and discussion

    International Nuclear Information System (INIS)

    1998-01-01

    The author deals with the experimental study of sorption, desorption and vertical migration of radionuclides in Sr-85 and Cs-137 in selected soil samples from around of NPP Bohunice and NPP Mochovce and other localities of the Slovakia. The influence of different materials [concurrent ions (K + , Ca 2+ , NH 4 + , pH), organic matter (peat) and zeolite, humidity] on kinetic of sorption and desorption of strontium and cesium as well as distribution coefficient (K D ) and transfer coefficients in followed samples of soils were followed. Obtained adsorption isotherm are presented and discussed. Using the Tessiere's sequential extraction analysis a gross variability in binding of radionuclides on soils was found. The obtained results were processed with the correlation analysis and the compartment model

  13. Thermal insulating panel

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, J.T.

    1985-09-11

    A panel of thermal insulation material has at least one main portion which comprises a dry particulate insulation material compressed within a porous envelope so that it is rigid or substantially rigid and at least one auxiliary portion which is secured to and extends along at least one of the edges of the main portions. The auxiliary portions comprise a substantially uncompressed dry particulate insulation material contained within an envelope. The insulation material of the auxiliary portion may be the same as or may be different from the insulation material of the main portion. The envelope of the auxiliary portion may be made of a porous or a non-porous material. (author).

  14. Concentrating photovoltaic solar panel

    Science.gov (United States)

    Cashion, Steven A; Bowser, Michael R; Farrelly, Mark B; Hines, Braden E; Holmes, Howard C; Johnson, Jr., Richard L; Russell, Richard J; Turk, Michael F

    2014-04-15

    The present invention relates to photovoltaic power systems, photovoltaic concentrator modules, and related methods. In particular, the present invention features concentrator modules having interior points of attachment for an articulating mechanism and/or an articulating mechanism that has a unique arrangement of chassis members so as to isolate bending, etc. from being transferred among the chassis members. The present invention also features adjustable solar panel mounting features and/or mounting features with two or more degrees of freedom. The present invention also features a mechanical fastener for secondary optics in a concentrator module.

  15. Photovoltaic panel clamp

    Science.gov (United States)

    Mittan, Margaret Birmingham [Oakland, CA; Miros, Robert H. J. [Fairfax, CA; Brown, Malcolm P [San Francisco, CA; Stancel, Robert [Loss Altos Hills, CA

    2012-06-05

    A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

  16. Final plenary discussion

    International Nuclear Information System (INIS)

    Federline, M.

    2004-01-01

    Rapporteur, chose to highlight other themes and issues from the seminar that appeared to be: - important for successful D and D; - worth further work in an international context; - controversial and worthy of further debate. The five main themes selected were as follows: - stakeholder involvement and communication; - strategy selection; - waste management and clearance; - funding and costs; - satisfying social demands. Various issues were identified under each one of these five themes and, in order to make best use of the time available for discussion, participants were invited to vote on the issues of most importance to them. Subsequent discussion was then focussed on the issues so identified. (author)

  17. Buckling localization in a cylindrical panel under axial compression

    DEFF Research Database (Denmark)

    Tvergaard, Viggo; Needleman, A.

    2000-01-01

    Localization of an initially periodic buckling pattern is investigated for an axially compressed elastic-plastic cylindrical panel of the type occurring between axial stiffeners on cylindrical shells. The phenomenon of buckling localization and its analogy with plastic flow localization in tensile...... test specimens is discussed in general. For the cylindrical panel, it is shown that buckling localization develops shortly after a maximum load has been attained, and this occurs for a purely elastic panel as well as for elastic-plastic panels. In a case where localization occurs after a load maximum......, but where subsequently the load starts to increase again, it is found that near the local load minimum, the buckling pattern switches back to a periodic type of pattern. The inelastic material behavior of the panel is described in terms of J(2) corner theory, which avoids the sometimes unrealistically high...

  18. Fuel ethanol discussion paper

    International Nuclear Information System (INIS)

    1992-01-01

    In recognition of the potential benefits of ethanol and the merits of encouraging value-added agricultural development, a committee was formed to develop options for the role of the Ontario Ministry of Agriculture and Food in the further development of the ethanol industry in Ontario. A consultation with interested parties produced a discussion paper which begins with an outline of the role of ethanol as an alternative fuel. Ethanol issues which require industry consideration are presented, including the function of ethanol as a gasoline oxygenate or octane enhancer, environmental impacts, energy impacts, agricultural impacts, trade and fiscal implications, and regulation. The ethanol industry and distribution systems in Ontario are then described. The current industry consists of one ethanol plant and over 30 retail stations. The key issue for expanding the industry is the economics of producing ethanol. At present, production of ethanol in the short term depends on tax incentives amounting to 23.2 cents/l. In the longer term, a significant reduction in feedstock costs and a significant improvement in processing technology, or equally significant gasoline price increases, will be needed to create a sustainable ethanol industry that does not need incentives. Possible roles for the Ministry are identified, such as support for ethanol research and development, financial support for construction of ethanol plants, and active encouragement of market demand for ethanol-blended gasolines

  19. Solar panel parallel mounting configuration

    Science.gov (United States)

    Mutschler, Jr., Edward Charles (Inventor)

    1998-01-01

    A spacecraft includes a plurality of solar panels interconnected with a power coupler and an electrically operated device to provide power to the device when the solar cells are insolated. The solar panels are subject to bending distortion when entering or leaving eclipse. Spacecraft attitude disturbances are reduced by mounting each of the solar panels to an elongated boom made from a material with a low coefficient of thermal expansion, so that the bending of one panel is not communicated to the next. The boom may be insulated to reduce its bending during changes in insolation. A particularly advantageous embodiment mounts each panel to the boom with a single mounting, which may be a hinge. The single mounting prevents transfer of bending moments from the panel to the boom.

  20. Advanced conversion technology review panel report

    International Nuclear Information System (INIS)

    Frazier, T.A.

    1998-01-01

    The Department of Energy (DOE), the National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory (JPL) established a DOE lead management team and an Advanced Conversion Technology Review Panel. The panel was tasked with providing the management team with an assessment and ranking of the three advanced conversion technologies. The three advanced conversion technologies were alkali metal thermal to electric converter (AMTEC), Stirling engine converter (SEC), and thermophotovoltaic (TPV). To rate and rank these three technologies, five criteria were developed: (1) Performance, (2) Development and Cost/Production and Cost/Schedule Risk, (3) Spacecraft Interface and Operations, (4) Ability to Scale Conversion, and (5) Safety. Discussed are the relative importance of each of these criteria and the rankings of the three advanced conversion technologies. It was the conclusion of the panel that the technology decision should be based on the risk that DOE and NASA are willing to accept. SEC is the most mature technology and would provide the lowest risk option. However, if more risk is acceptable, AMTEC not only provides benefits in the spacecraft interface but is also predicted to outperform the SEC. It was proposed that if AMTEC were selected, funding should be provided at a reasonable level to support back-up technology to be developed in a parallel fashion until AMTEC has proven its capability. The panel report and conclusion were provided to DOE in February 1997

  1. Reliability Study in Solar Panels

    OpenAIRE

    Español Lifante, Albert

    2012-01-01

    Crystalline silicon Modules are formed by single silicon photovoltaic cells. Since each one of these cells individually contributes to the overall electric power of the panel, the failure of one of them directly affects to its benefits and performance. To Minimize these negative effects, junction boxes with few bypass diodes are usually included in Photovoltaic Solar panels. A still experimental way to built solar panels is to integrate bypass diodes in every single cell, which would in...

  2. ALDS 1978 panel review. [PNL

    Energy Technology Data Exchange (ETDEWEB)

    Hall, D.L. (ed.)

    1979-08-01

    Pacific Northwest Laboratory (PNL) is examining the analysis of large data sets (ALDS). After one year's work, a panel was convened to evaluate the project. This document is the permanent record of that panel review. It consists of edited transcripts of presentations made to the panel by the PNL staff, a summary of the responses of the panel to these presentations, and PNL's plans for the development of the ALDS project. The representations of the PNL staff described various aspects of the project and/or the philosophy surrounding the project. Supporting materials appear in appendixes. 20 figures, 4 tables. (RWR)

  3. Proficiency testing for sensory profile panels : measuring panel performance

    NARCIS (Netherlands)

    Mcewan, J.A.; Hunter, E.A.; Gemert, L.J. van; Lea, P.

    2002-01-01

    Proficiency testing in sensory analysis is an important step towards demonstrating that results from one sensory panel are consistent with the results of other sensory panels. The uniqueness of sensory analysis poses some specific problems for measuring the proficiency of the human instrument

  4. Panel summary report

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Previous Advisory Group Meetings have led to IAEA Technical Reports No.15=5 (1974) on thermal discharge, 118 (1970) and 169 (1975) on sampling, storage and analysis methods for marine radioactivity studies, 167 (1975) on design of marine biological studies permitting comparative evaluation, and 172 (1976) on the effects of ionizing radiation on aquative organisms and eco-systems. The aim of the present report was a bringing into perspective not only problems designing radioecological experiments but to describe reliable experimental methodology suitable for a successful evaluation of radioactivity cycling, and of the effects of such radioactive additions to aquatic environments, as a result of nuclear activities. Specific examples are described. Individual studies presented to the Panel have been treated in detail, and constitute 19 separate INIS entries

  5. Ballistic study of Tensylon®–based panels

    Directory of Open Access Journals (Sweden)

    L-C. Alil

    2018-06-01

    Full Text Available Ballistic protection is a matter of interest requested by civilian as well as military needs. The last decade has witnessed an increase in the use of light weight and efficient armour systems. These panels may be used for body protection as well as light vehicle protection against small calibres or to enhance the protection level of heavier vehicles with decreasing or maintaining their weight penalty. Ultra high molecular weight polyethylene is a material of interest for light weight armour applications. The authors designed panels made of hot–pressed Tensylon® in different configurations with thin steel sheets as a backing and shield protection. Comparison of their ballistic performance to the theory predictions reveals the improved ballistic response of the panels. In addition, a non–pressed Tensylon® panel has been tested in order to facilitate the observations of the failure mechanisms inside the panels. Even if not suitable for practical use, such non–pressed panels clearly reveal the dynamic processes at micro–scale that occur during the impact. The failure mechanisms of the material under bullet penetration are discussed based on photography, optical microscopy and scanning electron microscopy. The supposed effects of the panel pressing are discussed based on the observed difference between pressed and non–pressed structures ballistic response.

  6. Strong increase of solar panels

    International Nuclear Information System (INIS)

    Segers, R.; Janssen, S.

    2012-01-01

    The number of installed solar panels in 2011 has increased again. 40 megawatt of new panels have been installed. This increase is twice as high as the year before. The production of solar power increased to 90 million kWh in 2011 as a result of this expansion. However, the share of solar power in total energy use is still very limited. [nl

  7. Panel Smooth Transition Regression Models

    DEFF Research Database (Denmark)

    González, Andrés; Terasvirta, Timo; Dijk, Dick van

    We introduce the panel smooth transition regression model. This new model is intended for characterizing heterogeneous panels, allowing the regression coefficients to vary both across individuals and over time. Specifically, heterogeneity is allowed for by assuming that these coefficients are bou...

  8. Matlab Software for Spatial Panels

    NARCIS (Netherlands)

    Elhorst, J.Paul

    2014-01-01

    Elhorst provides Matlab routines to estimate spatial panel data models at his website. This article extends these routines to include the bias correction procedure proposed by Lee and Yu if the spatial panel data model contains spatial and/or time-period fixed effects, the direct and indirect

  9. Mounting clips for panel installation

    Science.gov (United States)

    Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph; Valdes, Francisco

    2017-02-14

    An exemplary mounting clip for removably attaching panels to a supporting structure comprises a base, spring locking clips, a lateral flange, a lever flange, and a spring bonding pad. The spring locking clips extend upwardly from the base. The lateral flange extends upwardly from a first side of the base. The lateral flange comprises a slot having an opening configured to receive at least a portion of one of the one or more panels. The lever flange extends outwardly from the lateral flange. The spring bonding flange extends downwardly from the lever flange. At least a portion of the first spring bonding flange comprises a serrated edge for gouging at least a portion of the one or more panels when the one or more panels are attached to the mounting clip to electrically and mechanically couple the one or more panels to the mounting clip.

  10. Discussion

    International Nuclear Information System (INIS)

    Mittleman, M.H.

    1985-01-01

    The positive energy projection operators, just described by Prof. Sucher, convert the sick Hamiltonian, H/sub DC/, into a more robust one which can support bound states. They are however still a subject of some controversy. Prof. Grant pointed out that existing computer codes produce remarkable accuracy in numerical calculations which start from H/sub DC/ (with no projection operators) and so he questioned whether these operators were indeed necessary. In response, it was pointed out by several people in the audience that the codes implicitly limit the Dirac-Hartee-Fock wave functions to a normalizable sub-space and that this operation can be described as a projection operator which has the effect of eliminating the negative energy states which are not normalizable. This operation is however, not any of the three projection operators described by Sucher and so the question arises as to the sensitivity of the results (for the energy and wave functions) to the particular projection operators which are used. This appears to be an open question

  11. 1994 Panel 1 Utilization Plan

    International Nuclear Information System (INIS)

    1994-01-01

    The Waste Isolation Pilot Plant (WIPP) is intended to receive, handle, and permanently dispose of transuranic (TRU) waste. To fulfill this mission, the U.S. Department of Energy (DOE) constructed a full-scale facility to demonstrate both technical and operational principles of the permanent isolation of TRU waste. The WIPP consists of surface and underground facilities. Panel 1 is situated in the underground facility horizon which is located approximately 2,150 feet below the surface in the predominantly halite Salado Formation. The Panel 1 Utilization Plan provides a strategy for the optimum use of Panel 1 which is consistent with the priorities established by the DOE to accomplish the WIPP mission. These priorities, which include maintaining personnel safety, conducting performance assessment, and continued operational enhancements, are the guiding premise for the decisions on the planned usage of the WIPP underground facility. The continuation of ongoing investigations along with the planned testing and training to be carried out in Panel 1 will enhance the current knowledge and understanding of the operational and geotechnical aspects of the panel configuration. This enhancement will ultimately lead to safer, more efficient, and more cost-effective methods of operation. Excavation of the waste storage area began in May 1986 with the mining of entries to Panel 1. The original design for the waste storage rooms at the WIPP provided a limited period of time during which to mine the openings and to emplace waste. Each panel, consisting of seven storage rooms, was scheduled to be mined and filled in less than 5 years. Panel 1 was developed to receive waste for a demonstration phase that was scheduled to start in October 1988. The demonstration phase was deferred, and the experimental test program was modified to use contact-handled (CH) transuranic waste in bin-scale tests, planned for Room 1, Panel 1

  12. Thermal Analysis of Solar Panels

    Science.gov (United States)

    Barth, Nicolas; de Correia, João Pedro Magalhães; Ahzi, Saïd; Khaleel, Mohammad Ahmed

    In this work, we propose to analyze the thermal behavior of PV panels using finite element simulations (FEM). We applied this analysis to compute the temperature distribution in a PV panel BP 350 subjected to different atmospheric conditions. This analysis takes into account existing formulations in the literature and, based on NOCT conditions, meteorological data was used to validate our approach for different wind speed and solar irradiance. The electrical performance of the PV panel was also studied. The proposed 2D FEM analysis is applied to different region's climates and was also used to consider the role of thermal inertia on the optimization of the PV device efficiency.

  13. Human Cloning: Let's Discuss It.

    Science.gov (United States)

    Taras, Loretta; Stavroulakis, Anthea M.; Ortiz, Mary T.

    1999-01-01

    Describes experiences with holding discussions on cloning at a variety of levels in undergraduate biology courses. Discusses teaching methods used and student reactions to the discussions. Contains 12 references. (WRM)

  14. Exascale Workshop Panel Report Meeting

    Energy Technology Data Exchange (ETDEWEB)

    Khaleel, Mohammad A.

    2010-07-01

    The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

  15. Panel summary report

    International Nuclear Information System (INIS)

    Gutjahr, A.L.; Kincaid, C.T.; Mercer, J.W.; Murarka, I.P.; Siegel, M.D.; Wierenga, P.J.

    1987-01-01

    The objective of this report is to summarize the various modeling approaches that were used to simulate solute transport in a variably saturated emission. In particular, the technical strengths and weaknesses of each approach are discussed, and conclusions and recommendations for future studies are made. Five models are considered: (1) one-dimensional analytical and semianalytical solutions of the classical deterministic convection-dispersion equation (van Genuchten, Parker, and Kool, this report ); (2) one-dimensional simulation using a continuous-time Markov process (Knighton and Wagenet, this report); (3) one-dimensional simulation using the time domain method and the frequency domain method (Duffy and Al-Hassan, this report); (4) one-dimensional numerical approach that combines a solution of the classical deterministic convection-dispersion equation with a chemical equilibrium speciation model (Cederberg, this report); and (5) three-dimensional numerical solution of the classical deterministic convection-dispersion equation (Huyakorn, Jones, Parker, Wadsworth, and White, this report). As part of the discussion, the input data and modeling results are summarized. The models were used in a data analysis mode, as opposed to a predictive mode. Thus, the following discussion will concentrate on the data analysis aspects of model use. Also, all the approaches were similar in that they were based on a convection-dispersion model of solute transport. Each discussion addresses the modeling approaches in the order listed above

  16. TWRS vadose zone contamination issue expert panel report

    Energy Technology Data Exchange (ETDEWEB)

    Shafer, D.S.

    1997-05-01

    When members were first canvassed for participation in the Vadose Zone Expert Panel the stated purpose for convening the Panel was to review a controversial draft report, the SX Tank Farm Report. This report was produced by a DOE Grand Junction Project Office (GJPO) contractor, RUST Geotech, now MACTEC-ERS, for the DOE Richland Office (DOERL). Three meetings were planned for June, July and August, 1995 to review the draft report and to complete a Panel report by mid-September. The Expert Panel has found its efforts confounded by various non-technical issues. The Expert Panel has chosen to address some of the non-technical issues in this Preface rather than to dilute the technical discussion that follows in the body of this independent expert panel status report (Panel Report). Rather than performing a straightforward manuscript review, the Panel was asked to resolve conflicting interpretations of gamma-ray logging measurements performed in vadose zone boreholes (drywells) surrounding the high-level radioactive wastes of the SX tank farm. There are numerous and complex technical issues that must be evaluated before the vertical and radial extent of contaminant migration at the SX tank farm can be accurately assessed. When the Panel first met in early June, 1996, it quickly became apparent that the scientific and technical issues were obscured by policy and institutional affairs which have polarized discussion among various segments of the Hanford organization. This situation reflects the kinds of institutional problems described separately in reports by the National Research Council of the National Academy of Sciences (NAS/NRC), The Hanford Tanks Environmental Impacts and Policy Choices and BmTiers to Science: Technical Management of the Department of Energy Environmental Remediation Program. The Vadose Zone Characterization Program, appears to be caught between conflicting pressures and organizational mandates, some imposed from outside DOE-RL and some self

  17. A research program to reduce interior noise in general aviation airplanes. Design of an acoustic panel test facility

    Science.gov (United States)

    Roskam, J.; Muirhead, V. U.; Smith, H. W.; Henderson, T. D.

    1977-01-01

    The design, construction, and costs of a test facility for determining the sound transmission loss characteristics of various panels and panel treatments are described. The pressurization system and electronic equipment used in experimental testing are discussed as well as the reliability of the facility and the data gathered. Tests results are compared to pertinent acoustical theories for panel behavior and minor anomalies in the data are examined. A method for predicting panel behavior in the stiffness region is also presented.

  18. Panel on biological consequences

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    This article reviews the potential impacts of the post-nuclear-war conditions on the Earth's life-support systems. Discussion focuses on the large-scale interruptions in the normal services of natural ecosystems, which are crucial to the support of human life and society. The article concludes by saying biologists need to speak out. Only by enlightening the world, can nuclear ''endarkenment'' be prevented

  19. Insights from the panel review process

    International Nuclear Information System (INIS)

    Searborn, B.

    1998-01-01

    The environmental review process for nuclear waste management and disposal was unusual in that the Panel was asked to examine a concept rather than a specific project at a specific site. The Panel was charged with commenting on the safety and acceptability of the AECL concept, examining criteria for determining the safety and acceptability of any concept for managing nuclear fuel waste, and examining future steps which should be taken. In short, it was asked to provide policy advice to governments. The Panel concluded that safety is a key part, but only one part, of acceptability, and that safety must be viewed from both a technical and a social perspective. It judged that safety of the AECL concept had been adequately demonstrated from a technical perspective, but not from a social perspective. It also concluded that the AECL concept does not have the required level of public acceptability to be adopted as Canada's approach for managing nuclear fuel wastes. The paper examines in some detail the various aspects of the public concerns surrounding the nuclear cycle in general, and the safety of the proposals put forward by AECL for nuclear fuel waste management in particular. It notes the differences between those who look at safety from a technical perspective, and those who look at safety from a social perspective. And it lists the concerns related to acceptability in addition to the key factor of safety. After outlining the Panel's recommendations to governments on future steps to be taken, the paper discusses the extent to which the recommendations respond to the public's concerns. It stresses the importance of Aboriginal participation; of the creation of a new agency to deal with the full range of activities, technical and social, related to long-term management; of the public and decision-makers having more than one viable option to choose from; and of the essentiality of an inter-active process of public participation at all stages of decision-making. Finally

  20. Conclusions on the two technical panels on HLW-disposal and waste treatment processes respectively

    International Nuclear Information System (INIS)

    Dinkespiller, J.A.; Dejonghe, P.; Feates, F.

    1986-01-01

    The paper reports the concluding panel session at the European Community Conference on radioactive waste management and disposal, Luxembourg 1985. The panel considered the conclusions of two preceeding technical panels on high level waste (HLW) disposal and waste treatment processes. Geological disposal of HLW, waste management, safety assessment of waste disposal, public opinion, public acceptance of the manageability of radioactive wastes, international cooperation, and waste management in the United States, are all discussed. (U.K.)

  1. High temperature structural sandwich panels

    Science.gov (United States)

    Papakonstantinou, Christos G.

    High strength composites are being used for making lightweight structural panels that are being employed in aerospace, naval and automotive structures. Recently, there is renewed interest in use of these panels. The major problem of most commercial available sandwich panels is the fire resistance. A recently developed inorganic matrix is investigated for use in cases where fire and high temperature resistance are necessary. The focus of this dissertation is the development of a fireproof composite structural system. Sandwich panels made with polysialate matrices have an excellent potential for use in applications where exposure to high temperatures or fire is a concern. Commercial available sandwich panels will soften and lose nearly all of their compressive strength temperatures lower than 400°C. This dissertation consists of the state of the art, the experimental investigation and the analytical modeling. The state of the art covers the performance of existing high temperature composites, sandwich panels and reinforced concrete beams strengthened with Fiber Reinforced Polymers (FRP). The experimental part consists of four major components: (i) Development of a fireproof syntactic foam with maximum specific strength, (ii) Development of a lightweight syntactic foam based on polystyrene spheres, (iii) Development of the composite system for the skins. The variables are the skin thickness, modulus of elasticity of skin and high temperature resistance, and (iv) Experimental evaluation of the flexural behavior of sandwich panels. Analytical modeling consists of a model for the flexural behavior of lightweight sandwich panels, and a model for deflection calculations of reinforced concrete beams strengthened with FRP subjected to fatigue loading. The experimental and analytical results show that sandwich panels made with polysialate matrices and ceramic spheres do not lose their load bearing capability during severe fire exposure, where temperatures reach several

  2. Study of noise reduction characteristics of double-wall panels

    Science.gov (United States)

    Navaneethan, R.; Quayle, B.; Stevenson, S.; Graham, M.

    1983-05-01

    The noise reduction characteristics of general aviation type, flat, double-wall structures were investigated. The experimental study was carried out on 20-by-20 inch panels with an exposed area of 18 by 18 inches. A frequency range from 20 to 5000 Hz was covered. The experimental results, in general, follow the expected trends. At low frequencies the double-wall structures are no better than the single-wall structures. However, for depths normally used in the general aviation industry, the double-wall panels are very attractive. The graphite-spoxy skin panels have higher noise reduction at very low frequencies ( 100 Hz) than the Kevlar skin panels. But the aluminum panels have higher noise reduction in the high frequency region, due to their greater mass. Use of fiberglass insulation is not effective in the low frequency region, and at times it is even negative. But the insulation is effective in the high-frequency region. The theoretical model for predicting the transmission loss of these multilayered panels is also discussed.

  3. Panel discussion: Europe, America, and the Baltics - political and economic relations

    Index Scriptorium Estoniae

    2004-01-01

    Diskussioonis USA, Euroopa ja Baltimaade suhetest osalesid USA suursaadik Eestis Joseph DeThomas, Euroopa Komisjoni delegatsiooni juht Eestis John Kjaer, Türgi suursaadik Eestis Ömer Altug, välisministeeriumi kantsler Priit Kolbre jt. Vestlusringi juhtis Karlis Streips Lätist

  4. Panel discussion: environmental concerns and natural gas exports, exploration and development

    International Nuclear Information System (INIS)

    Tipton, D.G.

    1995-01-01

    Environmental issues faced by power companies were reviewed from the perspective of a major power company that is very much involved in the competitive revolution now underway in the U.S. The battles fought by the U.S. Generating Company of Bethesda, Maryland with environmental groups in the creation of its Hermiston Generating Plant in Oregon were recounted as an example of the different perspectives and the resulting daily challenges facing utility companies in the United States, problems not unlike those faced by natural gas companies in Canada.The principal problems arose when U.S. Generating was trying to secure financing for the Hermiston plant while being challenged by environmentalists in obtaining National Energy Board (NEB) licence to import Canadian gas. It was recommended that to avoid these types of problems, environmental concerns should be addressed when wells are being constructed, not at later stages when power companies are trying to purchase the gas. Several measures taken by U.S. Generating in taking environmental responsibility were outlined, among them its stated objective to investigate environmental impacts of any project prior to beginning of the project. To further illustrate its seriousness about environmental issues the company's standard have been set much higher than the minimum standards required by government. For example, an environmental training program was implemented as well as a recycling program. Contractors employed by the company must have and have to support a positive environmental philosophy. It was concluded that power companies could be successful in business, provided that they used the proper strategies while taking environmental responsibility

  5. Women leaders participate in panel discussion at McNamara Headquarters

    Science.gov (United States)

    her 40s as the life experience that most influenced her leadership style. "Before I had my one question, "What challenges have you experienced as a woman in leadership, and how did you overcome and communications for the agency. During her career, she has also held several leadership positions

  6. Assuring the success of the non-proliferation treaty extension conference. Excerpts from the panel discussions

    International Nuclear Information System (INIS)

    1994-01-01

    This publication presents excerpts from a conference organized by the NGO Committee on Disarmament Inc., in cooperation with the United Nations Centre for Disarmament Affairs, and covers the following issues: status of the comprehensive test ban treaty negotiations, fissile cut-off and ending production of nuclear weapons, how should nuclear weapons states pursue disarmament under Non-Proliferation Treaty (NPT), NPT extension: problems and prospects

  7. Avatud Ühiskonna Foorumi arutlusring = Open Society Forum Discussion Panel

    Index Scriptorium Estoniae

    2008-01-01

    6. novembril 2008 toimunud Avatud Ühiskonna Foorumil arutlesid president Toomas Hendrik Ilves, Euroopa Välissuhete Nõukogu aseesimees Martti Ahtisaari, Euroopa Välissuhete Nõukogu liige, Avatud Ühiskonna Instituudi nõukogu esimees George Soros, Euroopa Välissuhete Nõukogu liige, politoloogiaprofessor Aleksander Smolar ja Rahvusvahelise Kaitseuuringute Keskuse juhataja Kadri Liik suhete üle Venemaaga. Vestlust juhtis Eesti Välispoliitika Instituudi direktor Andres Kasekamp. President T. H. Ilves rääkis paradigma muutusest Euroopa Liidu ja Venemaa suhetes pärast Venemaa agressiooni Gruusia vastu, ühiselt jagatud väärtustel põhineva julgeolekuorganisatsiooni tähtsusest, autoritaarse ja demokraatliku kapitalismi vastuolust

  8. Intergenerational Panels at Centennial Events: Stimulating Discussion about Continuity and Change in the 4-H Program

    Science.gov (United States)

    Kaplan, Matthew S.; Weikert, Ben; Scholl, Jan; Rushton, Mya

    2013-01-01

    This article introduces an intergenerational strategy for organizations planning centennial celebratory events. The methods and findings from the 4-H through the Generations session conducted at the joint 4-H Leadership Conference and 4-H Leaders Forum to celebrate the Pennsylvania 4-H Centennial are reported. Youth and adult participants shared…

  9. Financing the next generation of new reactors in the united states. Panel Discussion

    International Nuclear Information System (INIS)

    Turner, Kyle; Simard, Ron; Tran, K.C.; Kelly, Patrick; Green, Barrett E.; Quinn, Edward L.; Stamos, John

    2001-01-01

    Full text of publication follows: With the California energy shortage and new growth forecasts in the United States, significant new base-load generation will be needed in the near future to meet electricity demands. New figures for growth in electricity demand for the United States rose significantly because of Internet and related business expansion. Lack of sufficient natural gas supplies to support new generation in some regions is causing a renewed interest in building new nuclear plants. Speakers will address the current status of available and near-term design options including both the U.S. Department of Energy Generation III and IV design packages, infrastructure challenges, and financial models that show that nuclear is competitive with alternatives and a prudent and profitable investment. (authors)

  10. Introduction statement at the panel discussion [contributed by James L. Snelgrove, ANL

    International Nuclear Information System (INIS)

    Snelgrove, James L.

    1993-01-01

    I just wanted to say a few words about the fuel demonstration part of the RERTR program, especially about our near-term activities. In the near-term we are considering three types of demonstrations. One of those is the irradiation of individual fuel elements in the ORR. These elements are to be essentially identical to the current ORR elements except that the enrichment will be 45% and the uranium density in the fuel meat will be somewhere in the neighborhood of 42 wt %. The exact loading hasn't been determined at this time, and preliminary work is underway to determine this. I think that I should point out that we really feel that the licensing basis is already available for what we are calling near-term fuel. That basis exists because of the extensive data obtained in the development of fuel for the ATR and for the HFIR. Those two reactors plus a few others are already making use of fuels loaded to this density at, of course, 93% enrichment. We don't see any real need from a metallurgical point of view to go through the complete demonstrations again. What we are doing though is loading this fuel with an enrichment and density which will be applicable in many cases in the near term, as it was mentioned yesterday, putting it in the ORR, burning it up, and doing a reasonable amount of post-irradiation examination. This data, we think, will be useful in licensing. Dr. Kanda mentioned in a comment earlier today that through the joint study with our program the Japanese are wanting to gain certain information from these experiments. We think that the experiments can satisfy those requirements. We would also be very interested to hear from any of the rest of you, the users, those of you who have to be concerned about gaining these licensing approvals, what sorts of information might really be needed here for any near-term work. We're planning to irradiate at least some elements to the order of, I would say, 90% burnup. Now, as it turns out in these elements at this enrichment and density, 90% burnup doesn't even surpass the burnup levels that have already been demonstrated as acceptable in the 93%-enriched fuels, and, therefore, one doesn't expect to find any swelling problems or any metallurgical-type problems at all. We will go through certain postirradiation examinations, however, but unless we see the need from some of the early parts of the examinations, we don't plan extensive metallurgical examinations. For these experiments, we would encourage participation by any fuel vendor who is interested in providing a few elements. We are not talking about many, maybe the order of two or three per vendor, which could be used in this program and would then, at least, provide a look to the rest of the world at elements made by particular vendors to particular enrichments and irradiated to good burnups. The other parts of our program in the near-term have to do with whole core demonstrations, and the one that is really planned at this time is the Ford Nuclear Reactor at the University of Michigan. The primary purpose of this demonstration is to have a core in which we can investigate the physics and safety characteristics of 20%-enriched fuel and compare them with those of the 93%-enriched cores. We will also use the data for verification of our analytical methods, so that when these methods are applied in evaluating the potential of other reactors for use of reduced-enrichment fuel, one will have increased confidence in the methods. I point out, of course, that there have been other reactors run with 20%-enriched fuel. However, that fuel was used quite awhile ago, and it's difficult today to obtain the sort of data in which we are really interested. The measurements in the FNR are planned to look at detailed flux distributions in the core and reflectors and at the ends of beam ports. It is also planned to measure the typical sorts of reactor characteristics which are always necessary to show that you're meeting your technical specifications and safety requirements.. The Ford Nuclear Reactor is an NRC licensed facility, and, as such, the University of Michigan will have to obtain licensing approval from NRC. We're hoping for the full cooperation of NRC, and we've been basically told that that will be forthcoming. We certainly don't anticipate that there are any new safety issues involved. We say te basis is there, and it's up to us, in cooperation with the University of Michigan, to demonstrate to the NRC that this is true. Out of this work will then come some documents that will be very useful as reference documents for any further near-term conversions using this type of fuel. I conclude my remarks here, and I will be happy to answer any questions

  11. The national laboratory business role in energy technology research and development. Panel Discussion

    International Nuclear Information System (INIS)

    Sackett, John; Sullivan, Charles J.; Aumeier, Steve; Sanders, Tom; Johnson, Shane; Bennett, Ralph

    2001-01-01

    Full text of publication follows: Energy issues will play a pivotal role in the economic and political future of the United States. For reasons of both available supply and environmental concerns, development and deployment of new energy technologies is critical. Nuclear technology is important, but economic, political, and technical challenges must be overcome if it is to play a significant role. This session will address business opportunities for national laboratories to contribute to the development and implementation of a national energy strategy, concentrating on the role of nuclear technology. Panelists have been selected from the national laboratories, the U.S. Department of Energy, and state regulators. (authors)

  12. The Wild-Card Character of "Bring Your Own:" A Panel Discussion

    Science.gov (United States)

    Campbell, W. Gardner; Fitch, Megan; German, Robert F., Jr.; Hulvey, Dale; McIntosh, Keith; McPherson, Michael R.; O'Keefe, John

    2013-01-01

    Panelists on the front lines of higher education information technology share their thoughts on Bring Your Own Device (BYOD) and what it could mean for colleges and universities. Five questions were asked of each panelist. These were: (1) How strategically important to higher education is the BYOD phenomenon? Is it simply a passing fad? (2) Should…

  13. MO-FG-BRB-04: Panel discussion [Global burden of cancer

    Energy Technology Data Exchange (ETDEWEB)

    Van Dyk, J. [Western University (Canada)

    2015-06-15

    The global burden of cancer is growing rapidly with an estimated 15 million new cases per year worldwide in 2015, growing to 19 million by 2025 and 24 million by 2035. The largest component of this growth will occur in low-to-middle income countries (LMICs). About half of these cases will require radiation treatment. The gap for available cancer treatment, including radiation therapy, between high-income countries (HICs) and LMICs is enormous. Accurate data and quantitative models to project the needs and the benefits of cancer treatment are a critical first step in closing the large cancer divide between LMICs and HICs. In this context, the Union for International Cancer Control (UICC) has developed a Global Task Force on Radiotherapy for Cancer Control (GTFRCC) with a charge to answer the question as to what it will take to close the gap between what exists today and reasonable access to radiation therapy globally by 2035 and what the potential clinical and economic benefits are for doing this. The Task Force has determined the projections of cancer incidence and the infrastructure required to provide access to radiation therapy globally. Furthermore it has shown that appropriate investment not only yields improved clinical outcomes for millions of patients but that it also provides an overall economic gain throughout all the income settings where this investment is made. This symposium will summarize the facets associated with this global cancer challenge by reviewing the cancer burden, looking at the requirements for radiation therapy, reviewing the benefits of providing such therapy both from a clinical and economic perspective and finally by looking at what approaches can be used to aid in the alleviation of this global cancer challenge. The speakers are world renowned experts in global public health issues (R. Atun), medical physics (D. Jaffray) and radiation oncology (N. Coleman). Learning Objectives: To describe the global cancer challenge and the corresponding potential benefits of addressing this challenge. To describe what radiation therapy infrastructure, in terms of facilities, equipment and personnel, will be required to address this challenge. To describe models of addressing personnel and infrastructure mobilization and capacity building within regions where significant cancer treatment disparities exist.

  14. Opening remarks for a panel discussion on short-term vs long-term procurement

    International Nuclear Information System (INIS)

    Courtenay, R.H.

    1990-01-01

    Long-term contracting in the late 1970's and early 1980's is blamed for some of the inequities that plague the uranium industry today. Utilities are obliged to pay prices far above prevailing levels and relatively low cost producers are forced to shut down while watching less efficient suppliers stay in business thanks to their long term supply agreements. Furthermore, it is argued that long-term contracts have contributed to supply instability by forcing the buildup of surplus inventories and by supporting excess incremental production by suppliers who have a baseload of long-term contracts. The depressed prices resulting from this oversupply are in turn jeopardizing future resource development and damaging supply reliability. In summary, the author's argument is that supply reliability will be greatly enhanced by the assurance of adequate primary supply from traditional sources such as Canada. This will not happen without long-term contracts. This conclusion may not be expected coming from a representative of Canada's largest uranium producer. But the final comment is less self serving. Many of the critics of long term contracts apparently expect a continuing and plentiful supply of East Bloc uranium to the spot market. A further question is to what extent East Bloc suppliers will eventually require long-term contracts in order to maintain production facilitates in economies that are no longer centrally planned, and where there is open competition for capital. Ultimately, reliability of supply from the non-traditional suppliers may also depend on long-term contracts

  15. Round Table Discussion on EASTWEST

    Directory of Open Access Journals (Sweden)

    Marina Tkacheva

    2017-12-01

    Full Text Available The discussion is focused on various aspects of interrelations between East and West. Its participants discuss the problems of the increasing tourist flows from China and the specific characteristics of Chinese tourists. The future development of tourism in the Baikal region is formulated, and the peculiarities of ethno tourism and its prospects are discussed.

  16. Solar Panel based Milk Pasteurization

    DEFF Research Database (Denmark)

    Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

    This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

  17. Solar Panel based Milk Pasteurization

    DEFF Research Database (Denmark)

    Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

    2002-01-01

    This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

  18. An innovative deployable solar panel system for Cubesats

    Science.gov (United States)

    Santoni, Fabio; Piergentili, Fabrizio; Donati, Serena; Perelli, Massimo; Negri, Andrea; Marino, Michele

    2014-02-01

    One of the main Cubesat bus limitations is the available on-board power. The maximum power obtained using body mounted solar panels and advanced triple junction solar cells on a triple unit Cubesat is typically less than 10 W. The Cubesat performance and the mission scenario opened to these small satellite systems could be greatly enhanced by an increase of the available power. This paper describes the design and realization of a modular deployable solar panel system for Cubesats, consisting of a modular hinge and spring system that can be potentially used on-board single (1U), double(2U), triple (3U) and six units (6U) Cubesats. The size of each solar panels is the size of a lateral Cubesat surface. The system developed is the basis for a SADA (Solar Array Drive Assembly), in which a maneuvering capability is added to the deployed solar array in order to follow the apparent motion of the sun. The system design trade-off is discussed, comparing different deployment concepts and architectures, leading to the final selection for the modular design. A prototype of the system has been realized for a 3U Cubesat, consisting of two deployable solar panel systems, made of three solar panels each, for a total of six deployed solar panels. The deployment system is based on a plastic fiber wire and thermal cutters, guaranteeing a suitable level of reliability. A test-bed for the solar panel deployment testing has been developed, supporting the solar array during deployment reproducing the dynamical situation in orbit. The results of the deployment system testing are discussed, including the design and realization of the test-bed, the mechanical stress given to the solar cells by the deployment accelerations and the overall system performance. The maximum power delivered by the system is about 50.4 W BOL, greatly enhancing the present Cubesat solar array performance.

  19. TWRS vadose zone contamination issue expert panel status report

    International Nuclear Information System (INIS)

    Shafer, D.S.

    1997-01-01

    When members were first canvassed for participation in the Vadose Zone Expert Panel the stated purpose for convening the Panel was to review a controversial draft report, the SX Tank Farm Report. This report was produced by a DOE Grand Junction Project Office (GJPO) contractor, RUST Geotech, now MACTEC-ERS, for the DOE Richland Office (DOERL). Three meetings were planned for June, July and August, 1995 to review the draft report and to complete a Panel report by mid-September. The Expert Panel has found its efforts confounded by various non-technical issues. The Expert Panel has chosen to address some of the non-technical issues in this Preface rather than to dilute the technical discussion that follows in the body of this independent expert panel status report (Panel Report). Rather than performing a straightforward manuscript review, the Panel was asked to resolve conflicting interpretations of gamma-ray logging measurements performed in vadose zone boreholes (drywells) surrounding the high-level radioactive wastes of the SX tank farm. There are numerous and complex technical issues that must be evaluated before the vertical and radial extent of contaminant migration at the SX tank farm can be accurately assessed. When the Panel first met in early June, 1996, it quickly became apparent that the scientific and technical issues were obscured by policy and institutional affairs which have polarized discussion among various segments of the Hanford organization. This situation reflects the kinds of institutional problems described separately in reports by the National Research Council of the National Academy of Sciences (NAS/NRC), The Hanford Tanks Environmental Impacts and Policy Choices and BmTiers to Science: Technical Management of the Department of Energy Environmental Remediation Program. The Vadose Zone Characterization Program, appears to be caught between conflicting pressures and organizational mandates, some imposed from outside DOE-RL and some self

  20. SU-B-BRA-09: Panel Member

    International Nuclear Information System (INIS)

    Willcut, V.

    2016-01-01

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will present their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.

  1. SU-B-BRA-08: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Hazle, J. [UT MD Anderson Cancer Center (United States)

    2016-06-15

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will present their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.

  2. SU-B-BRA-06: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Clements, J. [Kaiser Permanente, Oakland, CA (United States)

    2016-06-15

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will present their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.

  3. SU-B-BRA-05: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Pavord, D. [Health Quest (United States)

    2016-06-15

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will present their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.

  4. Review panel comments on geomedia specific research

    International Nuclear Information System (INIS)

    Heath, C.A.

    1984-01-01

    This includes remarks made by three panel members concerning geomedia-specific repository relevant research. The scientific work in the materials area has progressed significantly. Investigators are showing a better understanding of the importance of groundwater compositions. Significant attention is being paid to the importance of colloids and complexing agents. Good planning seems to be in evidence in the Nevada program. Much cooperation and planning in the materials program is needed. Requirements concerning the performance of waste management systems were included. Other topics discussed at the symposium were interactive testing of waste forms, canister materials, and repository rock. Characterization of the chemical and physical environment in the near-field was considered by several speakers. These papers and discussions were part of the Seventh International Symposium on the Scientific Ban's for Nuclear Waste Management

  5. SU-B-BRA-07: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Halvorsen, P. [Lahey Clinic, Burlington, MA (United States)

    2016-06-15

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will present their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.

  6. SU-B-BRA-09: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Willcut, V. [Elekta, Inc, Stockholm (Sweden)

    2016-06-15

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will present their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.

  7. Manpower Requirements and Education in Nuclear Science: An International Perspective Nuclear Science Manpower and Education Panel

    International Nuclear Information System (INIS)

    Zeisler, R.; Clark, S.B.; Parry, S.J.; Choppin, G.R.; Danesi, P.R.; Rossbach, M.; Williamson, C.; and others

    2005-01-01

    The MARC-VI conference served as an excellent setting for a session organized to present and discuss the problems in nuclear science manpower and education. A panel discussion and contributed papers reflected the world-wide situation. Major points of the panel discussion are presented. As a result, a resolution on the current situation of nuclear chemistry and radiochemistry was drafted and endorsed by the conference attendees. (author)

  8. Panel - People and riparian ecosystems: Past, present, and future

    Science.gov (United States)

    Richard D. Periman; Carol Raish; Frank E. Wozniak; David S. Brookshire; Michael McKee; Christian Schmidt; Tony Barron

    1996-01-01

    The purpose of this panel is to review past, present, and future human needs and desires associated with riparian environments. Our focus concerns the diverse demands, interactions, and expectations that people have for the riverine lands. The discussion is designed to take place within historic, economic, and social/cultural contexts.

  9. Panel: If I Only Knew Then What I Know Now

    Science.gov (United States)

    Goals Recycling Green Purchasing Pollution Prevention Reusing Water Resources Environmental Management Discussion and Networking Event Panel: If I Only Knew Then What I Know Now WHEN: May 16, 2016 2:30 PM - 5:00 Alamos CONTACT: Veronika Mocko CATEGORY: Community INTERNAL: Calendar Login Event Description The LANL

  10. United States panel presentations

    International Nuclear Information System (INIS)

    Wolfe, B.

    1990-01-01

    According to studies by the Department of Energy, toward the latter part of this decade, we will have to add five or six baseload plants, and in the period from 2000 to 205, we are going to need some sixty additional baseload plants. So in the next fifteen years we will need some sixty-five or seventy baseload plants. One can argue over the accuracy of those numbers, but tens of new baseload plants are going to be needed, and that means we are going to have to start the design of these plants in the next few years to get them online by the end of the century. I think there is going to be a change in attitude towards new plants. My view is that when the American public is faced with the decision of what kind of new energy source they need versus 'do I let the lights dim?', that nuclear power will be one of their choices. We will see as a result the revival of nuclear power - the water reactors in the near term, and I will leave for later discussion the question of whether we will use breeders and gas-cooled reactors for the longer term

  11. Solar panel truss mounting systems and methods

    Energy Technology Data Exchange (ETDEWEB)

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2016-06-28

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  12. Solar panel truss mounting systems and methods

    Energy Technology Data Exchange (ETDEWEB)

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2018-01-30

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  13. Solar panel truss mounting systems and methods

    Science.gov (United States)

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2015-10-20

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  14. The economics of wind energy. Collection of papers for discussions

    International Nuclear Information System (INIS)

    Vihriaelae, H.

    1995-01-01

    This publication contains the proceedings of EWEA Special Topic Conference '95 on the economics of wind energy, held in Helsinki, Finland, on 5-7 September, 1995. The programme consisted of panel discussions and poster presentations on National Programmes and Operational Experience of Wind Energy, Grid Issues and Avoided Direct Costs of Wind Energy, Avoided External Costs of Wind Energy, The Role of Wind Energy in Future Energy Supply and Technical Innovations of Wind Energy

  15. The economics of wind energy. Collection of papers for discussions

    Energy Technology Data Exchange (ETDEWEB)

    Vihriaelae, H [ed.

    1996-12-31

    This publication contains the proceedings of EWEA Special Topic Conference `95 on the economics of wind energy, held in Helsinki, Finland, on 5-7 September, 1995. The programme consisted of panel discussions and poster presentations on National Programmes and Operational Experience of Wind Energy, Grid Issues and Avoided Direct Costs of Wind Energy, Avoided External Costs of Wind Energy, The Role of Wind Energy in Future Energy Supply and Technical Innovations of Wind Energy

  16. The economics of wind energy. Collection of papers for discussions

    Energy Technology Data Exchange (ETDEWEB)

    Vihriaelae, H. [ed.

    1995-12-31

    This publication contains the proceedings of EWEA Special Topic Conference `95 on the economics of wind energy, held in Helsinki, Finland, on 5-7 September, 1995. The programme consisted of panel discussions and poster presentations on National Programmes and Operational Experience of Wind Energy, Grid Issues and Avoided Direct Costs of Wind Energy, Avoided External Costs of Wind Energy, The Role of Wind Energy in Future Energy Supply and Technical Innovations of Wind Energy

  17. Discussing Benefits and Risks of Tracheostomy: What Physicians Actually Say.

    Science.gov (United States)

    Hebert, Lauren M; Watson, Anne C; Madrigal, Vanessa; October, Tessie W

    2017-12-01

    When contemplating tracheostomy placement in a pediatric patient, a family-physician conference is often the setting for the disclosure of risks and benefits of the procedure. Our objective was to compare benefits and risks of tracheostomy presented during family-physician conferences to an expert panel's recommendations for what should be presented. We conducted a retrospective review of 19 transcripts of audio-recorded family-physician conferences regarding tracheostomy placement in children. A multicenter, multidisciplinary expert panel of clinicians was surveyed to generate a list of recommended benefits and risks for comparison. Primary analysis of statements by clinicians was qualitative. Single-center PICU of a tertiary medical center. Family members who participated in family-physician conferences regarding tracheostomy placement for a critically ill child from April 2012 to August 2014. We identified 300 physician statements describing benefits and risks of tracheostomy. Physicians were more likely to discuss benefits than risks (72% vs 28%). Three broad categories of benefits were identified: 1) tracheostomy would limit the impact of being in the PICU (46%); 2) perceived obstacles of tracheostomy can be overcome (34%); and 3) tracheostomy optimizes respiratory health (20%). Risks fell into two categories: tracheostomy involves a big commitment (71%), and it has complications (29%). The expert panel's recommendations were similar to risks and benefits discussed during family conferences; however, they suggested physicians present an equal balance of discussion of risks and benefits. When discussing tracheostomy placement, physicians emphasized benefits that are shared by physicians and families while minimizing the risks. The expert panel recommended a balanced approach by equally weighing risks and benefits. To facilitate educated decision making, physicians should present a more extensive range of risks and benefits to families making this critical

  18. Use of risk assessment panels during revision of the Tongass Land and Resource Management Plan.

    Science.gov (United States)

    Charles G. Shaw

    1999-01-01

    This paper describes the process used to conduct the 16 risk assessment panels and a subsistence working group held during revision of the Tongass land management plan. It provides an overview of how results from the panels were used by forest managers in plan-related decisionmaking, discusses some reactions to the effort, and identifies some opportunities to improve...

  19. 75 FR 57968 - Gastroenterology and Urology Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2010-09-23

    ...] Gastroenterology and Urology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY... public. Name of Committee: Gastroenterology and Urology Devices Panel of the Medical Devices Advisory... committee will discuss, make recommendations, and vote on information related to the PMA for the LAP-BAND...

  20. Fifth Single-Shell Tank Integrity Project Expert Panel Meeting August 28-29, 2014

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Todd M. [Washington River Protection Solutions, LLC, Richland, WA (United States; Gunter, Jason R. [Washington River Protection Solutions, LLC, Richland, WA (United States); Boomer, Kayle D. [Washington River Protection Solutions, LLC, Richland, WA (United States)

    2015-01-07

    On August 28th and 29th, 2014 the Single-Shell Tank Integrity Project (SSTIP) Expert Panel (Panel) convened in Richland, Washington. This was the Panel’s first meeting since 2011 and, as a result, was focused primarily on updating the Panel on progress in response to the past recommendations (Single-Shell Tank Integrity Expert Panel Report, RPP-RPT-45921, Rev 0, May 2010). This letter documents the Panel’s discussions and feedback on Phase I activities and results.

  1. The Space Station Photovoltaic Panels Plasma Interaction Test Program: Test plan and results

    Science.gov (United States)

    Nahra, Henry K.; Felder, Marian C.; Sater, Bernard L.; Staskus, John V.

    1989-01-01

    The Plasma Interaction Test performed on two space station solar array panels is addressed. This includes a discussion of the test requirements, test plan, experimental set-up, and test results. It was found that parasitic current collection was insignificant (0.3 percent of the solar array delivered power). The measured arcing threshold ranged from -210 to -457 V with respect to the plasma potential. Furthermore, the dynamic response of the panels showed the panel time constant to range between 1 and 5 microsec, and the panel capacitance to be between .01 and .02 microF.

  2. The Space Station photovoltaic panels plasma interaction test program - Test plan and results

    Science.gov (United States)

    Nahra, Henry K.; Felder, Marian C.; Sater, Bernard L.; Staskus, John V.

    1990-01-01

    The plasma Interaction Test performed on two space station solar array panels is addressed. This includes a discussion of the test requirements, test plan, experimental set-up, and test results. It was found that parasitic current collection was insignificant (0.3 percent of the solar array delivered power). The measured arcing threshold ranged from -210 to -457 V with respect to the plasma potential. Furthermore, the dynamic response of the panels showed the panel time constant to range between 1 and 5 microsec, and the panel capacitance to be between .01 and .02 microF.

  3. Mobile response in web panels

    NARCIS (Netherlands)

    de Bruijne, M.A.; Wijnant, A.

    2014-01-01

    This article investigates unintended mobile access to surveys in online, probability-based panels. We find that spontaneous tablet usage is drastically increasing in web surveys, while smartphone usage remains low. Further, we analyze the bias of respondent profiles using smartphones and tablets

  4. Keuringspanele ("Screening Panels") as Gepaste ...

    African Journals Online (AJOL)

    In this particular article attention is paid to screening panels as pre-trial mechanism with the exclusive purpose to select malpractice disputes, discourage unfounded disputes and to encourage an early settlement in case of a prima facie case. Several objections have been raised by critics in this regard, for instance, ...

  5. ASIST 2003: Part II: Panels.

    Science.gov (United States)

    Proceedings of the ASIST Annual Meeting, 2003

    2003-01-01

    Forty-six panels address topics including women in information science; users and usability; information studies; reference services; information policies; standards; interface design; information retrieval; information networks; metadata; shared access; e-commerce in libraries; knowledge organization; information science theories; digitization;…

  6. Multi-objective optimal design of sandwich panels using a genetic algorithm

    Science.gov (United States)

    Xu, Xiaomei; Jiang, Yiping; Pueh Lee, Heow

    2017-10-01

    In this study, an optimization problem concerning sandwich panels is investigated by simultaneously considering the two objectives of minimizing the panel mass and maximizing the sound insulation performance. First of all, the acoustic model of sandwich panels is discussed, which provides a foundation to model the acoustic objective function. Then the optimization problem is formulated as a bi-objective programming model, and a solution algorithm based on the non-dominated sorting genetic algorithm II (NSGA-II) is provided to solve the proposed model. Finally, taking an example of a sandwich panel that is expected to be used as an automotive roof panel, numerical experiments are carried out to verify the effectiveness of the proposed model and solution algorithm. Numerical results demonstrate in detail how the core material, geometric constraints and mechanical constraints impact the optimal designs of sandwich panels.

  7. Discussion on Papers 11 - 13

    International Nuclear Information System (INIS)

    Haws, E.; Matthews, M.E.; Wilson, E.M.; Charles-Jones, S.; Allen, R.F.; Young, R.M.; O'Connor, B.

    1992-01-01

    The discussion covered the following topics: the nature of boulder clay for foundations; navigation through the barrage; the construction of sluice caissons; government subsidies for construction costs; the effect of wave action on river banks; allowances for reflected energy in hydrodynamic models; water quality in impounded pools; sediment deposition. Separate abstracts have been prepared for the three papers under discussion. (UK)

  8. Emotional discussions reduce memory recall.

    Science.gov (United States)

    Soleti, Emanuela; Wright, Daniel B; Curci, Antonietta

    2017-05-01

    People often discuss events they have seen and these discussions can influence later recollections. We investigated the effects of factual, emotional, and free retelling discussion on memory recollections of individuals who have witnessed an event. Participants were shown a video, made an initial individual recall, participated in one of the three retelling conditions (emotional versus factual versus free) or a control condition, and then recalled the event individually again. Participants in the factual and free retelling conditions reported more items not previously recalled than participants in the control condition did, while the emotional condition did not show the same advantage. Participants in all three retelling conditions failed to report more previously recalled items as compared with the control condition. Finally, a memory conformity effect was observed for all three retelling conditions. These findings suggest that eyewitnesses' discussions may influence the accuracy of subsequent memory reports, especially when these discussions are focused on emotional details and thoughts.

  9. Regulatory decision with EPA/NRC/DOE/State Session (Panel)

    Energy Technology Data Exchange (ETDEWEB)

    O`Donnell, E.

    1995-12-31

    This panel will cover the Nuclear Regulatory Commission`s (NRC) proposed radiation limits in the Branch Technical Position on Low-Level Radioactive Waste Performance Assessment and the Environmental Protection Agency`s (EPA) draft regulation in Part 193. Representatives from NRC and EPA will discuss the inconsistencies in these two regulations. DOE and state representatives will discuss their perspective on how these regulations will affect low-level radioactive waste performance assessments.

  10. Moderately reverberant learning ultrasonic pinch panel.

    Science.gov (United States)

    Nikolovski, Jean-Pierre

    2013-10-01

    Tactile sensing is widely used in human-computer interfaces. However, mechanical integration of touch technologies is often perceived as difficult by engineers because it often limits the freedom of style or form factor requested by designers. Recent work in active ultrasonic touch technologies has made it possible to transform thin glass plates, metallic sheets, or plastic shells into interactive surfaces. The method is based on a learning process of touch-induced, amplitude-disturbed diffraction patterns. This paper proposes, first, an evolution in the design with multiple dipole transducers that improves touch sensitivity or maximum panel size by a factor of ten, and improves robustness and usability in moderately reverberant panels, and second, defines a set of acoustic variables in the signal processing for the evaluation of sensitivity and radiating features. For proof of concept purposes, the design and process are applied to 3.2- and 6-mm-thick glass plates with variable damping conditions. Transducers are bonded to only one short side of the rectangular substrates. Measurements show that the highly sensitive free lateral sides are perfectly adapted for pinch-touch and pinch-slide interactions. The advantage of relative versus absolute touch disturbance measurement is discussed, together with tolerance to abutting contaminants.

  11. MO-E-BRB-02: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Larner, J. [University of Virginia (United States)

    2016-06-15

    In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms of (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.

  12. MO-E-BRB-03: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Salter, B. [University Utah (United States)

    2016-06-15

    In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms of (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.

  13. MO-E-BRB-01: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Benedict, S. [University of California Davis Medical Center (United States)

    2016-06-15

    In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms of (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.

  14. El Salvador - Rural Electrification - Solar Panels

    Data.gov (United States)

    Millennium Challenge Corporation — This is a summative qualitative performance evaluation (PE) of the solar panel component of the solar panel component of the RE Sub-Activity. The final report will...

  15. Installation package for concentrating solar collector panels

    Science.gov (United States)

    1978-01-01

    The concentrating solar collector panels comprise a complete package array consisting of collector panels using modified Fresnel prismatic lenses for a 10 to 1 concentrating ratio, supporting framework, fluid manifolding and tracking drive system, and unassembled components for field erection.

  16. Retaining Ring Fastener for Solar Panels

    Science.gov (United States)

    Wilson, A. H.

    1983-01-01

    Simple articulating linkage secures solar panels into supporting framework. Five element linkage collapses into W-shape for easy placement into framework, then expands to form rectangle of same dimensions as those of panel.

  17. Animating Geometry Discussions with Flexigons.

    Science.gov (United States)

    McClintock, Ruth

    1994-01-01

    Presents activities with 10- and 4-straw flexigons, an object created by stringing together lengths of plastic drinking straws with nylon fishing line. Discusses several geometric theorems that can be demonstrated with flexigons. (MKR)

  18. Lunch to discuss IDRC's programming

    International Development Research Centre (IDRC) Digital Library (Canada)

    chantal Taylor

    Page 1. Description: Lunch to discuss IDRC's programming. Date: 2017-02-10. Attendees: 2 (IDRC 1). Location: Ottawa. Total: $79.92. Comments: 2016-2017 Hospitality Expense. Reports for Jean Lebel, President.

  19. Discussion on Papers 5 - 7

    International Nuclear Information System (INIS)

    Strongman, C.P.; Jones, R.; Moorhead, H.

    1992-01-01

    The topics raised in discussion included: the performance of the generator sets; the movement of sediments and the effect on beach levels; monitoring near-bed sediments; the erosion of barrage materials by suspended solids; sediment transport models; the accuracy of hydrographic and other surveys; the relative ornithological importance of the estuary with respect to others in the United Kingdom. Separate abstracts were prepared for each of the three papers under discussion. (UK)

  20. PV panel model based on datasheet values

    DEFF Research Database (Denmark)

    Sera, Dezso; Teodorescu, Remus; Rodriguez, Pedro

    2007-01-01

    This work presents the construction of a model for a PV panel using the single-diode five-parameters model, based exclusively on data-sheet parameters. The model takes into account the series and parallel (shunt) resistance of the panel. The equivalent circuit and the basic equations of the PV cell....... Based on these equations, a PV panel model, which is able to predict the panel behavior in different temperature and irradiance conditions, is built and tested....

  1. Grounds of two positions photovoltaic panels

    OpenAIRE

    Castán Fortuño, Fernando

    2008-01-01

    The objective of this Master Thesis is to find the optimum positioning for a two positions photovoltaic panel. Hence, it will be implemented a model in order to optimize the energy of the sun that the photovoltaic panel is receiving by its positioning. Likewise this project will include the comparison with other photovoltaic panel systems as the single position photovoltaics panels. Ultimately, it is also going to be designed a system array for the optimized model of two positions photovoltai...

  2. Sound-proof Sandwich Panel Design via Metamaterial Concept

    Science.gov (United States)

    Sui, Ni

    the core material maintains the mechanical property and yields a sound transmission loss that is consistently greater than 50 dB at low frequencies. Furthermore, the absorption property of the proposed honeycomb sandwich panel was experimentally studied. The honeycomb sandwich panel shows an excellent sound absorbing performance at high frequencies by using reinforced glass fiber without adding too much mass. The effect of the panel size and the stiffness of the grid-like frame effect of the honeycomb sandwich structures on sound transmission are discussed lastly. For the second sound-proof sandwich panel design, each unit cell of the sandwich panel is replaced by a Helmholtz resonator by perforating a small hole on the top face sheet. A perfect sound absorber sandwich panel with coupled Helmholtz resonators is proposed by two types: single identical Helmholtz resonator in each unit cell and dual Helmholtz resonators with different orifices, arranged in each cell arranged periodically. The soundproof sandwich panel is modelled as a panel embedded in rigid panel and assumed as a semiinfinite space with hard boundary condition. The net/mutual impedance model is first proposed and derived by solving Kirchhoff-Helmholtz integral by using the Green's function. The thermal-viscous energy dissipation at the thermal boundary layer dominates the total energy consumed. Two types of perfect sound absorber sandwich panel are designed in the last part. Two theoretical methods: the average energy and the equivalent surface impedance method are used to predict sound absorption performance. The geometry for perfect sound absorber sandwich panel at a target frequency can be obtained when the all the Helmholtz resonators are at resonance and the surface impedance of the sandwich panel matches the air impedance. The bandwidth for the identical sandwich panel mainly depends on the neck radius. The absorptive property of the dual Helmholtz resonators type of sandwich panel is studied by

  3. Control panel for CMC 8080 crate controller

    International Nuclear Information System (INIS)

    Masayuki Inokuchi

    1978-01-01

    The main features of Control Panel for CAMAC Crate Controller CMC 8080 are described. The control panel can be directly connected with CRATE CONTROLLER's front panel connector with a 50 lines cable without any changes in CMC 8080 system circuits. (author)

  4. 78 FR 63501 - Meetings of Humanities Panel

    Science.gov (United States)

    2013-10-24

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the... Humanities Panel will be held during November, 2013 as follows. The purpose of the meetings is for panel...

  5. 78 FR 74175 - Meetings of Humanities Panel

    Science.gov (United States)

    2013-12-10

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the... Humanities Panel will be held during January 2014 as follows. The purpose of the meetings is for panel review...

  6. Solar panel assembly and support pad

    Energy Technology Data Exchange (ETDEWEB)

    Hawley, W.W.

    1980-10-07

    A solar panel assembly is described comprising at least one solar panel, support means for carrying said panel, and at least one support pad having a base plate, upstanding longitudinal sides, and spaced apart flange means for connection to said support means, said upstanding sides and opposed flange means defining an interior volume for receiving and holding weighting material.

  7. Flat panel planar optic display

    Energy Technology Data Exchange (ETDEWEB)

    Veligdan, J.T. [Brookhaven National Lab., Upton, NY (United States). Dept. of Advanced Technology

    1994-11-01

    A prototype 10 inch flat panel Planar Optic Display, (POD), screen has been constructed and tested. This display screen is comprised of hundreds of planar optic class sheets bonded together with a cladding layer between each sheet where each glass sheet represents a vertical line of resolution. The display is 9 inches wide by 5 inches high and approximately 1 inch thick. A 3 milliwatt HeNe laser is used as the illumination source and a vector scanning technique is employed.

  8. Panel 4 - applications to transportation

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, F. [Argonne National Lab., IL (United States); Au, J. [Sundstrand Aerospace, Rockford, IL (United States); Bhattacharya, R. [Universal Energy Systems, Inc., Dayton, OH (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Blunier, D. [Caterpillar, Inc., Peoria, IL (United States); Boardman, B. [Deere & Co., Moline, IL (United States); Brombolich, L. [Compu-Tec Engineering, Chesterfield, MO (United States); Davidson, J. [Vanderbilt Univ., Nashville, TN (United States); Graham, M. [Northwestern Univ., Evanston, IL (United States); Hakim, N. [Detroit Diesel Corp., MI (United States); Harris, K. [Dubbeldee Harris Diamond Corp., Mt. Arlington, NJ (United States); Hay, R. [Norton Diamond Film, Northboro, MA (United States); Herk, L. [Southwest Research Inst., Southfield, MI (United States); Hojnacki, H.; Rourk, D. [Intelligent Structures Incorporated, Canton, MI (United States); Kamo, R. [Adiabatics, Inc., Columbus, IN (United States); Nieman, B. [Allied-Signal Inc., Des Plaines, IL (United States); O`Neill, D. [3M, St. Paul, MN (United States); Peterson, M.B. [Wear Sciences, Arnold, MD (United States); Pfaffenberger, G. [Allison Gas Turbine, Indianapolis, IN (United States); Pryor, R.W. [Wayne State Univ., Detroit, MI (United States); Russell, J. [Superconductivity Publications, Inc., Somerset, NJ (United States); Syniuta, W. [Advanced Mechanical Technology, Inc., Newton, MA (United States); Tamor, M. [Ford Motor Co., Dearborn, MI (United States); Vojnovich, T. [Dept. of Energy, Washington, DC (United States); Yarbrough, W. [Pennsylvania State Univ., University Park (United States); Yust, C.S. [Oak Ridge National Lab., TN (United States)

    1993-01-01

    The aim of this group was to compile a listing of current and anticipated future problem areas in the transportation industry where the properties of diamond and DLC films make them especially attractive and where the panel could strongly endorse the establishment of DOE/Transportation Industry cooperative research efforts. This section identifies the problem areas for possible applications of diamond/DLC technology and presents indications of current approaches to these problems.

  9. Teaching statistics to nursing students: an expert panel consensus.

    Science.gov (United States)

    Hayat, Matthew J; Eckardt, Patricia; Higgins, Melinda; Kim, MyoungJin; Schmiege, Sarah J

    2013-06-01

    Statistics education is a necessary element of nursing education, and its inclusion is recommended in the American Association of Colleges of Nursing guidelines for nurse training at all levels. This article presents a cohesive summary of an expert panel discussion, "Teaching Statistics to Nursing Students," held at the 2012 Joint Statistical Meetings. All panelists were statistics experts, had extensive teaching and consulting experience, and held faculty appointments in a U.S.-based nursing college or school. The panel discussed degree-specific curriculum requirements, course content, how to ensure nursing students understand the relevance of statistics, approaches to integrating statistics consulting knowledge, experience with classroom instruction, use of knowledge from the statistics education research field to make improvements in statistics education for nursing students, and classroom pedagogy and instruction on the use of statistical software. Panelists also discussed the need for evidence to make data-informed decisions about statistics education and training for nurses. Copyright 2013, SLACK Incorporated.

  10. Comparisons between various cavity and panel noise reduction control in double-panel structures

    NARCIS (Netherlands)

    Ho, J.H.; Kalverboer, J.; Berkhoff, A.P.

    2012-01-01

    This paper presents comparisons between various panel and cavity resonance control methods to reduce the transmitted sound in a double-panel structure. The double-panel, which consists of two panels with air in the gap, has the advantages of low weight and effective transmission-loss at high

  11. Panel Resonance Control and Cavity Control in Double-Panel Structures for Active Noise Reduction

    NARCIS (Netherlands)

    Ho, J.; Berkhoff, Arthur P.

    2011-01-01

    An analytical and experimental investigation of panel resonance control and cavity control in a double-panel structure is presented in this paper. The double-panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its low

  12. Noise Reduction in Double‿Panel Structures by Cavity and Panel Resonance Control

    NARCIS (Netherlands)

    Ho, J.; Berkhoff, Arthur P.

    2011-01-01

    This paper presents an investigation of the cavity and the panel resonance control in a double‿panel structure. The double‿panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective

  13. Noise reduction in double-panel structures by cavity and panel resonance control

    NARCIS (Netherlands)

    Ho, J.-H.; Berkhoff, A.P

    2011-01-01

    This paper presents an investigation of the cavity and the panel resonance control in a double‐panel structure. The double‐panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective

  14. Cavity Control and Panel Control Strategies in Double-Panel Structures for Transmitted Noise Reduction

    NARCIS (Netherlands)

    Ho, J.; Kalverboer, J.; Berkhoff, Arthur P.

    2012-01-01

    Investigation and comparisons of the cavity control and the panel control in a double-panel structure are presented in this paper. The double-panel structure, which comprises two panels with air in the gap, provides the advantages of low sound-transmission at high frequency, low heat-transmission

  15. Discussion on Papers 8 - 10

    International Nuclear Information System (INIS)

    Walker, R.; Wilson, E.A.; Gibson, P.

    1992-01-01

    Questions raised in the discussion are reported. These concerned: the Treasury discount rate for the construction of such a project; the CO 2 benefits of tidal schemes in developing countries; the criteria for deciding the total installed capacity of the scheme; the Government review of the cost-benefit analysis; the benefit arising from the elimination of nitrogen and sulphur oxides; security of supply; carbon tax projections. The only response reported is on the question of criteria for deciding the total installed capacity. Separate abstracts have been prepared on the three papers under discussion. (UK)

  16. Minutes of the Tank Waste Science Panel meeting January 12--13, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, D.M. [comp.] [Pacific Northwest Lab., Richland, WA (United States); Schulz, W.W. [comp.] [Schulz (W.W.), Albuquerque, New Mexico (United States)

    1993-10-01

    The eight meeting of the Tank Waste Science Panel (Science Panel) was convened January 12, 1993 in Richland, Washington. A list of attendees at this meeting is provided in Appendix A. Appendix B is the agenda prepared for the meeting. It was not strictly followed. The meeting focused on the presentation and discussion of recent information and results obtained from studies conducted to understand flammable gas released and ferrocyanide content behavior in Hanford waste tanks. The Science Panel discussed work performed at Pacific Northwest Laboratoy PNL, Westinghouse Hanford Company, Florida State University, and Fauske Associates. A number of recommendations and observations were made.

  17. Minutes of the Tank Waste Science Panel meeting January 12--13, 1993

    International Nuclear Information System (INIS)

    Strachan, D.M.; Schulz, W.W.

    1993-10-01

    The eight meeting of the Tank Waste Science Panel (Science Panel) was convened January 12, 1993 in Richland, Washington. A list of attendees at this meeting is provided in Appendix A. Appendix B is the agenda prepared for the meeting. It was not strictly followed. The meeting focused on the presentation and discussion of recent information and results obtained from studies conducted to understand flammable gas released and ferrocyanide content behavior in Hanford waste tanks. The Science Panel discussed work performed at Pacific Northwest Laboratoy PNL, Westinghouse Hanford Company, Florida State University, and Fauske Associates. A number of recommendations and observations were made

  18. DISCUSSION METHODS: MODIFICATION AND TRANSFORMATION

    Directory of Open Access Journals (Sweden)

    A A Abbasova

    2015-12-01

    Full Text Available The article is devoted to the importance of selecting the optimal methods of stimulation and motivation for learning. In modern conditions it is very important that the teacher did not give the students ready knowledge, but pointed out the way for the acquisition of knowledge, taught them to gain knowledge. This demands from the philologist the choice of effective forms of working with texts of different types and styles of speech, listening, speaking. In this connection a special attention should be paid to the lessons of speech development. There is a special group of methods to stimulate the development of communicative competence. Among them, the method of discussion, which is increasingly being used during the Russian language lessons. The specificity of using this method in class for teaching Russian as a foreign language, its basic functions (teaching, developing, educating are considered. The key rules for conducting a discussion at the Russian language classes, the main and additional functions-roles of the teacher, the participants, the minute-taker are analyzed. The advantages of the discussion in Russian in comparison to the discussion in the students’ native language are summarized.

  19. General discussion of feasibility study

    International Nuclear Information System (INIS)

    Calori, F.

    1976-01-01

    Fundamentals, objectives and parameters of feasibility studies in the field of nuclear power project planning are discussed in a general way. Technical and economic problems to be considered are pointed out. In special cases, IAEA offers its aid and support. (UA) [de

  20. Helping Students Discuss Race Openly

    Science.gov (United States)

    Landsman, Julie

    2016-01-01

    One way teachers can disrupt inequities is by doing the work to foster discussions in which students talk about race--and racism--honestly together. Teachers also need to be ready to talk with students sensitively when the subject of race comes up spontaneously--in a student's work, connected to events outside school, or in response to a…

  1. Another Discussion about Academic Corruption

    Science.gov (United States)

    Changgeng, Li

    2007-01-01

    Academic corruption is a commonplace matter about which all people are clearly aware. However, people often overlook many hidden or latent manifestations of academic corruption. This article discusses eight of these manifestations: indiscriminate use of the academic team spirit, the proliferation of "word games," deliberate attacks on…

  2. Learning through synchronous electronic discussion

    NARCIS (Netherlands)

    Kanselaar, G.; Veerman, A.L.; Andriessen, J.E.B.

    2000-01-01

    This article reports a study examining university student pairs carrying out an electronic discussion task in a synchronous computer mediated communication (CMC) system (NetMeeting). The purpose of the assignment was to raise students' awareness concerning conceptions that characterise effective

  3. Choice Orientations, Discussions, and Prospects.

    Science.gov (United States)

    Raywid, Mary Anne

    1992-01-01

    Examining the contemporary school choice debate yields arguments that are education, economics, governance, and policy driven. To "break the exclusive franchise," school districts are increasingly sponsoring school operation and education services supplied by multiple sources, and states are discussing sponsorship of schools by entities…

  4. Assessment of commercial lamb meat quality by British and Spanish taste panels.

    Science.gov (United States)

    Sañudo, C; Nute, G R; Campo, M M; María, G; Baker, A; Sierra, I; Enser, M E; Wood, J D

    1998-01-01

    Trained sensory panels in Britain and Spain assessed loin meat from commercial lambs purchased in Spain, which included Welsh lamb (imported from Britain) and two Spanish breeds (Merino and Rasa Aragonesa). The British panel also assessed British lamb purchased in local butcher shops and supermarkets. Sensory panels, in each country, received meat from the same lambs and used their local methods of cooking and assessment. Spanish panels used unstructured line scales to measure lamb odour intensity, tenderness, juiciness, lamb flavour intensity and two hedonic scales of flavour liking and overall liking. The British panel used 8 point category scales with the same attributes. Results from both panels in objective parameters were in agreement, hence showing that different trained sensory panels may arrive at the same conclusion. However, when panellists were allowed to make hedonic judgements (preference), the British panel preferred British lamb and the Spanish panel preferred Spanish lamb. This finding has important consequences for lamb producers who export their lambs and demonstrates that the underlying reasons for different preferences should be investigated. Production variables are discussed in relation to their influence on lamb eating quality and as a way to tailor lamb eating quality attributes familiar to consumers in the importing country.

  5. Reconstruction of Spectra Using X-ray Flat Panel Detector; Reconstruccion de Espectros de Rayos X Utilizando un Detector Flat Panel

    Energy Technology Data Exchange (ETDEWEB)

    Gallardo, S.; Querol, A.; Pozuelo, F.; Juste, B.; Rodenas, J.; Verdu, G.

    2013-07-01

    In this work, we used a flat panel detector with a wedge of PMMA for absorbed dose curve for given working conditions of X-ray tube The relationship between absorbed dose curve recorded by the flat panel and primary X-ray spectrum is defined by a response function that can be obtained using the Monte Carlo method, namely the MCNP5 code. However there are some problems that affect the applicability of this method such as: flat panel characteristics and the characteristics of the physical process (ill-conditioned problem). Both aspects are discussed in this paper.

  6. Flat panel display - Impurity doping technology for flat panel displays

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Toshiharu [Advanced Technology Planning, Sumitomo Eaton Nova Corporation, SBS Tower 9F, 10-1, Yoga 4-chome, Setagaya-ku, 158-0097 Tokyo (Japan)]. E-mail: suzuki_tsh@senova.co.jp

    2005-08-01

    Features of the flat panel displays (FPDs) such as liquid crystal display (LCD) and organic light emitting diode (OLED) display, etc. using low temperature poly-Si (LTPS) thin film transistors (TFTs) are briefly reviewed comparing with other FPDs. The requirements for fabricating TFTs used for high performance FPDs and system on glass (SoG) are addressed. This paper focuses on the impurity doping technology, which is one of the key technologies together with crystallization by laser annealing, formation of high quality gate insulator and gate-insulator/poly-Si interface. The issues to be solved in impurity doping technology for state of the art and future TFTs are clarified.

  7. Flat panel display - Impurity doping technology for flat panel displays

    International Nuclear Information System (INIS)

    Suzuki, Toshiharu

    2005-01-01

    Features of the flat panel displays (FPDs) such as liquid crystal display (LCD) and organic light emitting diode (OLED) display, etc. using low temperature poly-Si (LTPS) thin film transistors (TFTs) are briefly reviewed comparing with other FPDs. The requirements for fabricating TFTs used for high performance FPDs and system on glass (SoG) are addressed. This paper focuses on the impurity doping technology, which is one of the key technologies together with crystallization by laser annealing, formation of high quality gate insulator and gate-insulator/poly-Si interface. The issues to be solved in impurity doping technology for state of the art and future TFTs are clarified

  8. High Efficiency, High Density Terrestrial Panel. [for solar cell modules

    Science.gov (United States)

    Wohlgemuth, J.; Wihl, M.; Rosenfield, T.

    1979-01-01

    Terrestrial panels were fabricated using rectangular cells. Packing densities in excess of 90% with panel conversion efficiencies greater than 13% were obtained. Higher density panels can be produced on a cost competitive basis with the standard salami panels.

  9. Discussion on Papers 14 - 16

    International Nuclear Information System (INIS)

    Charles-Jones, S.; Muirhead, S.; Wilson, E.A.; Jefferson, M.; Binnie, C.J.A.; O'Connor, B.A.; Rothwell, P.; Cowie, D.

    1992-01-01

    Further observations were made on the great potential for tidal power developments in NW Australia. Discussion on the Severn Barrage paper and environmental effects of tidal power plants centred mainly around the impact on bird populations. The topics covered were: the adaptability of birds to changes in their environment with particular reference to the importance of inter-tidal areas for wildfowl and wading birds in the United Kingdom; the creation of mudflats as replacement feeding areas for wading birds; whether there is a danger that pressure from the construction industry might result in a barrage being built before the uncertainties in the environmental impact assessment are removed. Separate abstracts have been prepared for the three papers under discussion. (UK)

  10. Summary of presentations and discussions

    International Nuclear Information System (INIS)

    Takeuchi, Mitsuo

    2008-01-01

    In December 2007, the Forum on Stakeholder Confidence discussed its theme entitled 'Link between research, development and demonstration (RD and D) and stakeholder confidence'. It was remarked that regulators need a technical demonstration to aid in evaluating the safety case. Local stakeholders appreciate the opportunity to visualise technological arrangements. In both cases, demonstration adds to confidence in the feasibility of solutions. Some believe there is an important role for analogues in communication with stakeholders, if handled with integrity. To explore and benchmark current practices, it was decided to hold a topical session at the 9. regular meeting of the FSC on 4 June 2008 regarding the use of analogues for confidence building. The session opened with an introductory presentation by the session rapporteur. This incorporated input provided for the purpose by FSC members in cooperation with their country's representative to the NEA RWMC 'Integration Group on the Safety Case'. Three speakers then presented the various uses of analogues by implementers, regulators and scientists to build their own confidence; a fourth speaker dealt with the experience of using natural analogues in public information. The presentations addressed the use of analogues in the field of geological disposal of high-level waste (HLW) and long-lived intermediate level (ILW-LL) radioactive waste. Then the FSC participants split into two working groups for discussion. The outcome of these discussions was reported in plenary on 6 June 2008 and it was agreed to publish proceedings of the session. The present summary, prepared by the session rapporteur with input from the NEA Secretariat, captures the main points heard in the course of the event. It combines data from the formal presentations and remarks made in discussion. The latter represent viewpoints expressed by a group whose primary focus is not natural analogues but rather stakeholder interests. The summary and viewpoints

  11. Qualitative discussion of quantitative radiography

    International Nuclear Information System (INIS)

    Berger, H.; Motz, J.W.

    1975-01-01

    Since radiography yields an image that can be easily related to the tested object, it is superior to many nondestructive testing techniques in revealing the size, shape, and location of certain types of discontinuities. The discussion is limited to a description of the radiographic process, examination of some of the quantitative aspects of radiography, and an outline of some of the new ideas emerging in radiography. The advantages of monoenergetic x-ray radiography and neutron radiography are noted

  12. Laboratory panel and radiometer calibration

    CSIR Research Space (South Africa)

    Deadman, AJ

    2011-07-01

    Full Text Available stream_source_info Griffith1_2011.pdf.txt stream_content_type text/plain stream_size 16659 Content-Encoding ISO-8859-1 stream_name Griffith1_2011.pdf.txt Content-Type text/plain; charset=ISO-8859-1 LABORATORY PANEL... of Land surface imaging through a ground reference standard test site?, on http://qa4eo.org/documentation.html, 2009. [2] K. J. Thome, D. L. Helder, D. Aaron, and J. D. Dewald, ?Landsat-5 TM and Landsat-7 ETM+ Absolute Radiometric Calibration Using...

  13. Earth Summit Science, policy discussed

    Science.gov (United States)

    Leath, Audrey T.

    The United Nations Conference on Environment and Development, the “Earth Summit,” convenes in Rio de Janeiro on June 3. President Bush has pledged to attend part of the 2-week conference. The highlight of the summit will be the signing of an international framework convention to reduce emissions of greenhouse gases. The final elements of the agreement were negotiated in New York last week by representative of 143 countries. In anticipation of the Rio conference, the Senate Committee on Energy and Natural Resources held two standing-roomonly hearings, reviewing the scientific basis for global warming due to greenhouse gases and discussing the details of the proposed convention.

  14. Axelrod model: accepting or discussing

    Science.gov (United States)

    Dybiec, Bartlomiej; Mitarai, Namiko; Sneppen, Kim

    2012-10-01

    Agents building social systems are characterized by complex states, and interactions among individuals can align their opinions. The Axelrod model describes how local interactions can result in emergence of cultural domains. We propose two variants of the Axelrod model where local consensus is reached either by listening and accepting one of neighbors' opinion or two agents discuss their opinion and achieve an agreement with mixed opinions. We show that the local agreement rule affects the character of the transition between the single culture and the multiculture regimes.

  15. Optimum design of composite panel with photovoltaic-thermo module. Absorbing effect of cooling panel; Hikari netsu fukugo panel no saiteki sekkei. Reikyaku panel no kyunetsu koka

    Energy Technology Data Exchange (ETDEWEB)

    Sato, M; Kikuchi, S; Tani, T [Science University of Tokyo, Tokyo (Japan); Kadotani, K; Imaizumi, H [Komatsu Ltd., Tokyo (Japan)

    1996-10-27

    The composite panel with photovoltaic-thermo module becomes higher in energy-saving than the conventional air-conditioning system by the independent radiational heating and cooling effect obtained when the generating panel using a solar cell module is combined with the heating and cooling panel using a thermo-element module. The output of a solar cell module can be directly used because the solar cell module operates in AC. This paper reports the relation between the absorbed value and power consumption of the cooling panel, while paying attention to the cooling panel. The performance coefficient of the maximum absorbed value from an non-absorbing substance to a cooling panel is 2 to 3. Assume that the cooling panel during non-adiabatic operation is operated using a solar cell module of 800 W/m{sup 2} in solar intensity and 15% in conversion efficiency. The cooling-surface temperature difference is 12.12 K, and the maximum absorbed value of a non-absorbing substance to a cooling panel is 39.12 W/m{sup 2}. The absorbed value of the outer temperature to the cooling panel is 74.4 W/m{sup 2}, and each performance coefficient is 3.26 and 0.62. The absorbed value must be calculated for evaluation from the cooling-surface temperature difference measured directly from the cooling panel. 4 refs., 8 figs., 1 tab.

  16. 76 FR 52955 - Medicare Program; Meeting of the Technical Advisory Panel on Medicare Trustee Reports

    Science.gov (United States)

    2011-08-24

    ... Panel's discussion is expected to be very technical in nature and will focus on the actuarial and... discussion is expected to focus on highly technical aspects of estimation involving economics and actuarial science. Panelists are not restricted, however, in the topics that they choose to discuss. Procedure and...

  17. Panel session: Disposal of HLW - ready for implementation

    International Nuclear Information System (INIS)

    Heremans, R.; Come, B.; Barbreau, A.; Girardi, F.

    1986-01-01

    The paper is a report of a panel session at the European Community conference on radioactive waste management and disposal, Luxembourg 1985, concerning the safe and long-term disposal of high-activity and long-lived waste. The subjects discussed include: geological barriers including deep sea-bed sediments, engineered barriers, technological problems (repository construction, waste emplacement, backfilling and sealing), safety analysis, performance assessment of disposal system components, and finally institutional, legal and financial aspects of geological disposal. (U.K.)

  18. Composite steel panels for tornado missile barrier walls. Topical report

    International Nuclear Information System (INIS)

    1975-10-01

    A composite steel panel wall system is defined as a wall system with concrete fill sandwiched between two steel layers such that no concrete surface is exposed on the interior or the exterior wall surface. Three full scale missile tests were conducted on two specific composite wall systems. The results of the full scale tests were in good agreement with the finalized theory. The theory is presented, and the acceptance of the theory for design calculations is discussed

  19. DISCUSSION METHODS: MODIFICATION AND TRANSFORMATION

    Directory of Open Access Journals (Sweden)

    Abbasova, A.A.

    2016-03-01

    Full Text Available This article is about how to the importance of selecting the optimal methods of stimulation and motivation to learn. In modern conditions it is very important that the teacher gave the students ready knowledge, and pointed the way for the acquisition of knowledge, taught to acquire knowledge. This requires the selection of effective forms of language and literature work with texts of different types and styles of speech, listening, speaking. In this regard, special attention should be given lessons of speech development. There is a special group of methods to stimulate the development of communicative competence. Among them, and the method of discussion, which is increasingly being used in the classroom in the Russian language

  20. Open discussions on nuclear energy

    International Nuclear Information System (INIS)

    1978-01-01

    In the first part, economic prospects in the world and in the European Community and their repercussions on energy demand are examined. Supply structure and growth scenari are outlined. Present and potential contribution of nuclear energy to energy supply is developed. The pros and cons are given. In the second part is examined how the production and use of various form of energy including nuclear energy, can affect health and the environment, with special reference to waste of all kinds. Safety problems and risk of accidents are examined in both non nuclear and nuclear sectors. Prospects for a low energy society and economic and social implications of the use of new forms of energy are also discussed

  1. Discussing epigenetics in Southern California

    Science.gov (United States)

    2012-01-01

    With the goal of discussing how epigenetic control and chromatin remodeling contribute to the various processes that lead to cellular plasticity and disease, this symposium marks the collaboration between the Institut National de la Santé et de la Recherche Médicale (INSERM) in France and the University of California, Irvine (UCI). Organized by Paolo Sassone-Corsi (UCI) and held at the Beckman Center of the National Academy of Sciences at the UCI campus December 15–16, 2011, this was the first of a series of international conferences on epigenetics dedicated to the scientific community in Southern California. The meeting also served as the official kick off for the newly formed Center for Epigenetics and Metabolism at the School of Medicine, UCI (http://cem.igb.uci.edu). PMID:22414797

  2. COINCO Strategy 2025 - Discussion Paper

    DEFF Research Database (Denmark)

    Jespersen, Per Homann; Jensen, Anne; Stroschein, Christoph

     The regions and cities in the COINCO-corridor Oslo-Göteborg-Malmö-Copenhagen-Berlin have worked out a strategy proposal which is presented in this discussion paper. Behind the strategy is a political will to utilize mutual strengths and together become a leading player in a globalized world, based...... on matters essential to development - ‘hard' issues such as transport infrastructure and ‘soft' issues on improving cooperation within business, administration and knowledge production. The synergy of COINCO will have to come from collaboration among businesses. Supporting cooperation between existing...... to be institutionally supported. Therefore a number of knowledge institutions have to be formed organized around the ‘triple helix'-principle - a tight collaboration between business, administration and knowledge producers, especially universities. Also new ways of collaboration have to be explored - ‘network...

  3. Solar-Panel Dust Accumulation and Cleanings

    Science.gov (United States)

    2005-01-01

    Air-fall dust accumulates on the solar panels of NASA's Mars Exploration Rovers, reducing the amount of sunlight reaching the solar arrays. Pre-launch models predicted steady dust accumulation. However, the rovers have been blessed with occasional wind events that clear significant amounts of dust from the solar panels. This graph shows the effects of those panel-cleaning events on the amount of electricity generated by Spirit's solar panels. The horizontal scale is the number of Martian days (sols) after Spirit's Jan. 4, 2005, (Universal Time) landing on Mars. The vertical scale indicates output from the rover's solar panels as a fraction of the amount produced when the clean panels first opened. Note that the gradual declines are interrupted by occasional sharp increases, such as a dust-cleaning event on sol 420.

  4. Panel 3: Genetics and Precision Medicine of Otitis Media.

    Science.gov (United States)

    Lin, Jizhen; Hafrén, Hena; Kerschner, Joseph; Li, Jian-Dong; Brown, Steve; Zheng, Qing Y; Preciado, Diego; Nakamura, Yoshihisa; Huang, Qiuhong; Zhang, Yan

    2017-04-01

    Objective The objective is to perform a comprehensive review of the literature up to 2015 on the genetics and precision medicine relevant to otitis media. Data Sources PubMed database of the National Library of Medicine. Review Methods Two subpanels were formed comprising experts in the genetics and precision medicine of otitis media. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a merged draft was created. The entire panel met at the 18th International Symposium on Recent Advances in Otitis Media in June 2015 and discussed the review and refined the content. A final draft was made, circulated, and approved by the panel members. Conclusion Many genes relevant to otitis media have been identified in the last 4 years in advancing our knowledge regarding the predisposition of the middle ear mucosa to commensals and pathogens. Advances include mutant animal models and clinical studies. Many signaling pathways are involved in the predisposition of otitis media. Implications for Practice New knowledge on the genetic background relevant to otitis media forms a basis of novel potential interventions, including potential new ways to treat otitis media.

  5. Solar Panel Installations on Existing Structures

    OpenAIRE

    Tim D. Sass; Pe; Leed

    2013-01-01

    The rising price of fossil fuels, government incentives and growing public aware-ness for the need to implement sustainable energy supplies has resulted in a large in-crease in solar panel installations across the country. For many sites the most eco-nomical solar panel installation uses existing, southerly facing rooftops. Adding solar panels to an existing roof typically means increased loads that must be borne by the building-s structural elements. The structural desig...

  6. Sound transmission loss of composite sandwich panels

    Science.gov (United States)

    Zhou, Ran

    Light composite sandwich panels are increasingly used in automobiles, ships and aircraft, because of the advantages they offer of high strength-to-weight ratios. However, the acoustical properties of these light and stiff structures can be less desirable than those of equivalent metal panels. These undesirable properties can lead to high interior noise levels. A number of researchers have studied the acoustical properties of honeycomb and foam sandwich panels. Not much work, however, has been carried out on foam-filled honeycomb sandwich panels. In this dissertation, governing equations for the forced vibration of asymmetric sandwich panels are developed. An analytical expression for modal densities of symmetric sandwich panels is derived from a sixth-order governing equation. A boundary element analysis model for the sound transmission loss of symmetric sandwich panels is proposed. Measurements of the modal density, total loss factor, radiation loss factor, and sound transmission loss of foam-filled honeycomb sandwich panels with different configurations and thicknesses are presented. Comparisons between the predicted sound transmission loss values obtained from wave impedance analysis, statistical energy analysis, boundary element analysis, and experimental values are presented. The wave impedance analysis model provides accurate predictions of sound transmission loss for the thin foam-filled honeycomb sandwich panels at frequencies above their first resonance frequencies. The predictions from the statistical energy analysis model are in better agreement with the experimental transmission loss values of the sandwich panels when the measured radiation loss factor values near coincidence are used instead of the theoretical values for single-layer panels. The proposed boundary element analysis model provides more accurate predictions of sound transmission loss for the thick foam-filled honeycomb sandwich panels than either the wave impedance analysis model or the

  7. Case Study - Monitoring the Photovoltaic Panels

    OpenAIRE

    PACURAR Ana Talida; TOADER Dumitru; PACURAR Cristian

    2014-01-01

    The photovoltaic cell represents one of the most dynamic and attractive way to converts renewable energy sources in electricity production. That means to convert solar energy into electricity. In this paper is presented a analogy between two types of photovoltaic panels installed, with educational role for students. Also the objective of this paper is to estimate the performance of photovoltaic panels and to provide the best solution for industry. These two types of photovoltaic panels wer...

  8. Orbiter radiator panel solar focusing test

    Science.gov (United States)

    Howell, H. R.; Rankin, J. G.

    1983-01-01

    Test data are presented which define the area around the Orbiter radiator panels for which the solar reflections are concentrated to one-sun or more. The concave shape of the panels and their specular silver/Teflon coating causes focusing of the reflected solar energy which could have adverse heating effects on equipment or astronaut extravehicular activity (EVA) in the vicinity of the radiator panels. A room ambient test method was utilized with a one-tenth scale model of the radiator panels.

  9. Interagency Security Classification Appeals Panel (ISCAP) Decisions

    Data.gov (United States)

    National Archives and Records Administration — This online collection includes documents decided upon by the Interagency Security Classification Appeals Panel (ISCAP) starting in Fiscal Year 2012. The documents...

  10. Development of Electrostatically Clean Solar Array Panels

    Science.gov (United States)

    Stern, Theodore G.

    2000-01-01

    Certain missions require Electrostatically Clean Solar Array (ECSA) panels to establish a favorable environment for the operation of sensitive scientific instruments. The objective of this program was to demonstrate the feasibility of an ECSA panel that minimizes panel surface potential below 100mV in LEO and GEO charged particle environments, prevents exposure of solar cell voltage and panel insulating surfaces to the ambient environment, and provides an equipotential, grounded structure surrounding the entire panel. An ECSA panel design was developed that uses a Front Side Aperture-Shield (FSA) that covers all inter-cell areas with a single graphite composite laminate, composite edge clips for connecting the FSA to the panel substrate, and built-in tabs that interconnect the FSA to conductive coated coverglasses using a conductive adhesive. Analysis indicated the ability of the design to meet the ECSA requirements. Qualification coupons and a 0.5m x 0.5m prototype panel were fabricated and tested for photovoltaic performance and electrical grounding before and after exposure to acoustic and thermal cycling environments. The results show the feasibility of achieving electrostatic cleanliness with a small penalty in mass, photovoltaic performance and cost, with a design is structurally robust and compatible with a wide range of current solar panel technologies.

  11. Nuclear thermal propulsion technology: Results of an interagency panel in FY 1991

    International Nuclear Information System (INIS)

    Clark, J.S.; Mcdaniel, P.; Howe, S.; Helms, I.; Stanley, M.

    1993-04-01

    NASA LeRC was selected to lead nuclear propulsion technology development for NASA. Also participating in the project are NASA MSFC and JPL. The U.S. Department of Energy will develop nuclear technology and will conduct nuclear component, subsystem, and system testing at appropriate DOE test facilities. NASA program management is the responsibility of NASA/RP. The project includes both nuclear electric propulsion (NEP) and nuclear thermal propulsion (NTP) technology development. This report summarizes the efforts of an interagency panel that evaluated NTP technology in 1991. Other panels were also at work in 1991 on other aspects of nuclear propulsion, and the six panels worked closely together. The charters for the other panels and some of their results are also discussed. Important collaborative efforts with other panels are highlighted. The interagency (NASA/DOE/DOD) NTP Technology Panel worked in 1991 to evaluate nuclear thermal propulsion concepts on a consistent basis. Additionally, the panel worked to continue technology development project planning for a joint project in nuclear propulsion for the Space Exploration Initiative (SEI). Five meetings of the panel were held in 1991 to continue the planning for technology development of nuclear thermal propulsion systems. The state-of-the-art of the NTP technologies was reviewed in some detail. The major technologies identified were as follows: fuels, coatings, and other reactor technologies; materials; instrumentation, controls, health monitoring and management, and associated technologies; nozzles; and feed system technology, including turbopump assemblies

  12. Consultant radiographer leadership - A discussion

    International Nuclear Information System (INIS)

    Hogg, Peter; Hogg, Dianne; Henwood, Suzanne

    2008-01-01

    Effective leadership can be defined in many ways and is an essential element of successful organisations; poor leadership can result in problems such as low staff morale, high staff turnover and reduced productivity. Effective leadership behaviours are well documented in the literature and various leadership models have been proposed that illustrate these behaviours. This discussion paper does not focus on any particular model. Instead it considers the 'Leadership Qualities Framework' which was developed specifically for use within the UK National Health Service. This framework draws upon a range of leadership models and as such it gives a broad indication of leadership behaviours. The framework comprises three components - 'personal qualities', 'setting direction' and 'delivering the service'. This paper commences with an argument as to why effective leadership is important in organisations generally, and specifically within healthcare organisations. Various examples of leadership are illustrated from within and outside the NHS in order to demonstrate effective leadership behaviours. The Leadership Qualities Framework is then examined, along with scenarios to illustrate effective leadership behaviours in context (i.e. within a healthcare organisation). Subsequent reflections on the scenarios aim to identify leadership behaviours that are explained within the framework. The final element of this paper draws on [limited] published evidence of where consultant radiographers have demonstrated effective leadership behaviours. In this section the published evidence is examined and reflected upon. At the end of the article we indicate additional reading for those who wish to further develop their theoretical and practical leadership skills

  13. The metal failure cases discussed

    Energy Technology Data Exchange (ETDEWEB)

    Gupton, P

    1978-06-05

    The metal failure cases discussed by P. Gupton (Monsanto Chem. Co.) at a joint meeting of the American Society of Metals (ASM) and the National Association of Corrosion Engineers Calgary Section (Calgary 1978) include a high-temperature (1775/sup 0/-1800/sup 0/F) failure in an HK 40 outside heater tube in a synthesis gas steam-methane reformer, resulting in two major fissures caused by carbonization and oxide deposits with high carbon and lead contents due to the use of remelt scrap material with high lead content; separation of a support pad from a 30 in. pipeline due to corrosion caused by molybdenum-peroxide action; oxidation of a section of 180/sup 0/ U-bend in a thermal ethylene cracking furnace due to fluxing reaction of a high sodium and calcium feed which collected in the return bed; stress corrosion cracking of an austenitic stainless cracker tube from high temperature and electrolytic attack; and other cases of metal failure caused by weld quality problems, use of contaminated material and inadequate designs, processing, and fabrication.

  14. Emission trading: A discussion paper

    International Nuclear Information System (INIS)

    1992-05-01

    Emission trading is a market-based incentive program designed to control air emissions in which a cap is placed on the total quantity of pollutants allowed to be emitted in an airshed. Appropriate shares of this amount are allocated among participating emission sources, and participants can buy or sell their shares. Advantages of emission trading include its potential to achieve air emission targets at a lower cost than the traditional command and control approach, and its ability to accommodate economic growth without compromising environmental quality. A study was conducted to evaluate the potential use of emission trading programs to achieve emission reduction goals set for nitrogen oxides, volatile organic compounds (VOC), and sulfur oxides. Emission trading programs in the USA are reviewed and a set of factors important for the success of emission trading are identified. Key policy and design issues related to an emission trading program are identified, explained, and discussed. Administrative issues are then analyzed, such as legislative authority, monitoring and enforcement requirements, and trading between jurisdictions. A preliminary assessment of emission trading for control of NOx and VOC in the Lower Fraser Valley indicates that emission trading would be feasible, but legislative authority to implement such a program would have to be introduced

  15. Laser illuminated flat panel display

    Energy Technology Data Exchange (ETDEWEB)

    Veligdan, J.T.

    1995-12-31

    A 10 inch laser illuminated flat panel Planar Optic Display (POD) screen has been constructed and tested. This POD screen technology is an entirely new concept in display technology. Although the initial display is flat and made of glass, this technology lends itself to applications where a plastic display might be wrapped around the viewer. The display screen is comprised of hundreds of planar optical waveguides where each glass waveguide represents a vertical line of resolution. A black cladding layer, having a lower index of refraction, is placed between each waveguide layer. Since the cladding makes the screen surface black, the contrast is high. The prototype display is 9 inches wide by 5 inches high and approximately I inch thick. A 3 milliwatt HeNe laser is used as the illumination source and a vector scanning technique is employed.

  16. Microclimate boxes for panel paintings

    DEFF Research Database (Denmark)

    Wadum, Jørgen

    1998-01-01

    The use of microclimate boxes to protect vulnerable panel paintings is, therefore, not a new phenomenon of the past two or three decades. Rather, it has been a concern for conservators and curators to protect these objects of art at home and in transit since the end of the nineteenth century....... The increased number of travelling exhibitions in recent years has heightened the need to protect paintings during circulation (Thomson 1961; Mecklenburg 1991). The use and design of microclimate boxes have been evolving since 1892. These boxes may be divided into three broad groups: those using an active...... buffer material to stabilize the internal RH, a more recent box containing no added buffer material, and, in recent times, boxes with an altered gas content. Another concern is the appearance (aesthetics) of the box....

  17. Consultant radiographer leadership - A discussion

    Energy Technology Data Exchange (ETDEWEB)

    Hogg, Peter [Directorate of Radiography, University of Salford, Allerton Building, Frederick Road, Salford, Greater Manchester M6 6PU (United Kingdom)], E-mail: p.hogg@salford.ac.uk; Hogg, Dianne [Henwood Associates (South East) Ltd, Company Number: 513796, Registered Office: 2 Lakeview Stables, Lower St Clere, Kemsing, Kent, TN15 6NL (United Kingdom); Henwood, Suzanne [East Lancashire Primary Care Trust, Linden Business Centre, Linden Road, Colne. BB8 9BA (United Kingdom)

    2008-12-15

    Effective leadership can be defined in many ways and is an essential element of successful organisations; poor leadership can result in problems such as low staff morale, high staff turnover and reduced productivity. Effective leadership behaviours are well documented in the literature and various leadership models have been proposed that illustrate these behaviours. This discussion paper does not focus on any particular model. Instead it considers the 'Leadership Qualities Framework' which was developed specifically for use within the UK National Health Service. This framework draws upon a range of leadership models and as such it gives a broad indication of leadership behaviours. The framework comprises three components - 'personal qualities', 'setting direction' and 'delivering the service'. This paper commences with an argument as to why effective leadership is important in organisations generally, and specifically within healthcare organisations. Various examples of leadership are illustrated from within and outside the NHS in order to demonstrate effective leadership behaviours. The Leadership Qualities Framework is then examined, along with scenarios to illustrate effective leadership behaviours in context (i.e. within a healthcare organisation). Subsequent reflections on the scenarios aim to identify leadership behaviours that are explained within the framework. The final element of this paper draws on [limited] published evidence of where consultant radiographers have demonstrated effective leadership behaviours. In this section the published evidence is examined and reflected upon. At the end of the article we indicate additional reading for those who wish to further develop their theoretical and practical leadership skills.

  18. AQUEOUS HOMOGENEOUS REACTORTECHNICAL PANEL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Diamond, D.J.; Bajorek, S.; Bakel, A.; Flanagan, G.; Mubayi, V.; Skarda, R.; Staudenmeier, J.; Taiwo, T.; Tonoike, K.; Tripp, C.; Wei, T.; Yarsky, P.

    2010-12-03

    Considerable interest has been expressed for developing a stable U.S. production capacity for medical isotopes and particularly for molybdenum- 99 (99Mo). This is motivated by recent re-ductions in production and supply worldwide. Consistent with U.S. nonproliferation objectives, any new production capability should not use highly enriched uranium fuel or targets. Conse-quently, Aqueous Homogeneous Reactors (AHRs) are under consideration for potential 99Mo production using low-enriched uranium. Although the Nuclear Regulatory Commission (NRC) has guidance to facilitate the licensing process for non-power reactors, that guidance is focused on reactors with fixed, solid fuel and hence, not applicable to an AHR. A panel was convened to study the technical issues associated with normal operation and potential transients and accidents of an AHR that might be designed for isotope production. The panel has produced the requisite AHR licensing guidance for three chapters that exist now for non-power reactor licensing: Reac-tor Description, Reactor Coolant Systems, and Accident Analysis. The guidance is in two parts for each chapter: 1) standard format and content a licensee would use and 2) the standard review plan the NRC staff would use. This guidance takes into account the unique features of an AHR such as the fuel being in solution; the fission product barriers being the vessel and attached systems; the production and release of radiolytic and fission product gases and their impact on operations and their control by a gas management system; and the movement of fuel into and out of the reactor vessel.

  19. The influence of group discussion on performance judgments: rating accuracy, contrast effects, and halo.

    Science.gov (United States)

    Palmer, Jerry K; Loveland, James M

    2008-03-01

    The authors investigated the effect of group discussion, such as may occur formally in panel interview scenarios, assessment centers, or 360-degree feedback situations, on judgments of performance. Research on group polarization suggests that the effect of group discussion combined with raters' preexisting impressions of ratees or interviewees should result in an extremitization of impressions. Thus, the authors hypothesized that group discussion would (a) make ratings less accurate, (b) polarize impressions that were already good or poor as reflected by greater contrast effects, and (c) increase positive halo. Results indicated that group discussion resulted in less accurate ratings and greater contrast effects. Additional analyses suggested that group discussion increased positive halo. The authors discuss implications for research on group or panel judgments.

  20. Processing of Low-Grade Uranium Ores. Proceedings of a Panel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1967-06-15

    Proceedings of a panel convened by the IAEA in Vienna, 27 June - 1 July 1966. The 22 specialists from 15 countries and one international organization who attended the meeting were asked to give an appraisal of the current situation with regard to the processing of low-grade uranium ores and make recommendations for a possible IAEA programme of activities. This publication covers the work of the panel. Contents: Status reports (13 reports); Technical reports (13 reports); Summaries of discussions; Recommendations of the panel. Each report is in its original language (16 English, 4 French, 2 Russian and 4 Spanish) and each technical report is preceded by an abstract in English and one in the original language if this is not English. The summaries of discussions and the panel recommendations are in English. (author)

  1. Panel on accelerators and detectors in the 1950s

    International Nuclear Information System (INIS)

    Jones, L.W.; Amaldi, U.; Hofstadter, R.; Kerst, D.W.; Wilson, R.R.

    1989-01-01

    The article takes the form of a panel of famous particle physics scientists discussing accelerator design and detectors used in the 1950s. The discussion ranges over accelerator energy capacities, the invention of alternating-gradient focusing, and colliding beam machines, beam stacking and the application of digital computers to accelerator calculations. The development of particle beams using strong-focusing lenses and electrostatic separators rounded off the decade. Detectors moved from bubble chambers, the use of plastic and inorganic scintillators, to hadron calorimeters, Cherenkov counters and finally spark chambers. Various discoveries made using sodium iodide scintillation counters are noted. (UK)

  2. Toxicity management of angiogenesis inhibitors: resolution of expert panel

    Directory of Open Access Journals (Sweden)

    Pavel O. Rumiantsev

    2017-12-01

    Full Text Available On 22 June 2017 in St. Petersburg the expert panel was held on the topic “Management of toxicity of angiogenesis inhibitors”, which discussed current issues of systemic therapy of advanced differentiated thyroid cancer resistant to radioactive iodine therapy, advanced kidney cancer and questions of efficacy and safety of new target drugs in the treatment of these diseases. The reports and discussions of experts raised the following questions: 1. Own experience of using lenvatinib in patients with differentiated thyroid cancer refractory to therapy with radioactive iodine and kidney cancer. 2. Profile of efficacy and safety of modern targeted therapy with multikinase inhibitors. 3. Prophylaxis and management of predictable toxicity.

  3. Recommendations for the performance rating of flat plate terrestrial photovoltaic solar panels

    Science.gov (United States)

    Treble, F. C.

    1976-01-01

    A review of recommendations for standardizing the performance rating of flat plate terrestrial solar panels is given to develop an international standard code of practice for performance rating. Required data to characterize the performance of a solar panel are listed. Other items discussed are: (1) basic measurement procedures; (2) performance measurement in natural sunlight and simulated sunlight; (3) standard solar cells; (4) the normal incidence method; (5) global method and (6) definition of peak power.

  4. Experimental identification of noise reduction properties of honeycomb panels using a small cabin

    OpenAIRE

    D'Ortona, Vittorio; Vivolo, Marianna; Pluymers, Bert; Vandepitte, Dirk; Desmet, Wim

    2013-01-01

    A procedure to identify the noise reduction properties of panels by means of a single cabin test setup is discussed. The complexity of the sound pressure field that builds up in the acoustic volume requires the support of advanced numerical techniques allowing for the evaluation of noise and vibration performances. Numerical models are used to predict the structural dynamics and the vibro-acoustic behaviour of the tested panel. Both Finite Element and Boundary Element simulations are validate...

  5. Environmental Effects on Flutter Characteristics of Laminated Composite Rectangular and Skew Panels

    Directory of Open Access Journals (Sweden)

    T.V.R. Chowdary

    1996-01-01

    Full Text Available A finite element method is presented for predicting the flutter response of laminated composite panels subjected to moisture concentration and temperature. The analysis accounts for material properties at elevated temperature and moisture concentration. The analysis is based on the first-order approximation to the linear piston theory and laminated plate theory that includes shear deformation. Both rectangular and skew panels are considered. Stability boundaries at moisture concentrations and temperatures for various lamination schemes and boundary conditions are discussed.

  6. Electronic unit for fotovoltaic solar panelling validation

    International Nuclear Information System (INIS)

    Vazquez, J.; Valverde, J.; Garcia, J.M.

    1988-01-01

    A low cost and easy to use electronic system for photovoltaic solar panelling validation is described. It measures, with a certain periodicity, voltage and current given by the panel, determines the supplied power, and every so often, its maximum valves. The unit is fitted with a data storage system which allows data recording for later analysis. (Author)

  7. Outgassing tests on iras solar panel samples

    Science.gov (United States)

    Premat, G.; Zwaal, A.; Pennings, N. H.

    1980-01-01

    Several outgassing tests were carried out on representative solar panel samples in order to determine the extent of contamination that could be expected from this source. The materials for the construction of the solar panels were selected as a result of contamination obtained in micro volatile condensable materials tests.

  8. 49 CFR 845.22 - Technical panel.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Technical panel. 845.22 Section 845.22... Technical panel. The Director, Bureau of Accident Investigation, or the Director, Bureau of Field Operations, shall designate members of the Board's technical staff to participate in the hearing and initially...

  9. Dynamic spatial panels : models, methods, and inferences

    NARCIS (Netherlands)

    Elhorst, J. Paul

    This paper provides a survey of the existing literature on the specification and estimation of dynamic spatial panel data models, a collection of models for spatial panels extended to include one or more of the following variables and/or error terms: a dependent variable lagged in time, a dependent

  10. 78 FR 74174 - Humanities Panel Advisory Committee

    Science.gov (United States)

    2013-12-10

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Humanities Panel Advisory Committee AGENCY: National Endowment for the Humanities. ACTION: Notice of Charter Renewal for Humanities Panel Advisory... its implementing regulations, 41 CFR 102-3.65, the National Endowment for the Humanities (NEH) gives...

  11. 76 FR 6828 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-02-08

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of Meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  12. 75 FR 18906 - Meetings of Humanities Panel

    Science.gov (United States)

    2010-04-13

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of Meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  13. 76 FR 14434 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-03-16

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, National Foundation on the Arts and the Humanities. ACTION: Notice...-463, as amended), notice is hereby given that the following meetings of Humanities Panels will be held...

  14. 75 FR 50007 - Meetings of Humanities Panel

    Science.gov (United States)

    2010-08-16

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of Meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  15. 75 FR 26285 - Meetings of Humanities Panel

    Science.gov (United States)

    2010-05-11

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  16. 76 FR 77559 - Meeting of Humanities Panel

    Science.gov (United States)

    2011-12-13

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meeting of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of Meeting. SUMMARY: Pursuant to the provisions of... of the Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania Avenue NW., Washington...

  17. 77 FR 22359 - Meetings of Humanities Panel

    Science.gov (United States)

    2012-04-13

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of Meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue NW...

  18. 76 FR 20375 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-04-12

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities ACTION: Notice of additional meeting. SUMMARY: Pursuant to the... the following meeting of the Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania...

  19. 76 FR 70168 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-11-10

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of additional meeting. SUMMARY: Pursuant to the... the following meeting of the Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania...

  20. 76 FR 41826 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-07-15

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of additional meeting. SUMMARY: Pursuant to the... the following meeting of the Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania...

  1. 76 FR 52697 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-08-23

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  2. 76 FR 56242 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-09-12

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, The National Foundation on the Arts and the Humanities. ACTION... Humanities Panel at the Old Post Office, 1100 Pennsylvania Avenue, NW., Washington, DC 20506 which was...

  3. 76 FR 70765 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-11-15

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, National Foundation on the Arts and the Humanities. ACTION: Notice...-463, as amended), notice is hereby given that the following meetings of Humanities Panels will be held...

  4. 76 FR 63664 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-10-13

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  5. 77 FR 17102 - Meetings of Humanities Panel

    Science.gov (United States)

    2012-03-23

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, National Foundation on the Arts and the Humanities ACTION... Humanities Panel at the Old Post Office, 1100 Pennsylvania Avenue NW., Washington, DC 20506, which was...

  6. An intersection test for panel unit roots

    NARCIS (Netherlands)

    Hanck, C.

    2013-01-01

    This article proposes a new panel unit root test based on Simes' ( 1986) classical intersection test. The test is robust to general patterns of cross-sectional dependence and yet is straightforward to implement, only requiring p-values of time series unit root tests of the series in the panel, and

  7. Blood Test: Comprehensive Metabolic Panel (CMP)

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Blood Test: Comprehensive Metabolic Panel (CMP) KidsHealth / For Parents / Blood ... de sangre: panel metabólico ampliado What Is a Blood Test? A blood test is when a sample of ...

  8. Documentation Panels Enhance Teacher Education Programs

    Science.gov (United States)

    Warash, Bobbie Gibson

    2005-01-01

    Documentation of children's projects is advantageous to their learning process and is also a good method for student teachers to observe the process of learning. Documentation panels are a unique way to help student teachers understand how children learn. Completing a panel requires a student teacher to think through a process. Teachers must learn…

  9. Delamination tolerance studies in laminated composite panels

    Indian Academy of Sciences (India)

    Abstract. Determination of levels of tolerance in delaminated composite panels is an important issue in composite structures technology. The primary intention is to analyse delaminated composite panels and estimate Strain. Energy Release Rate (SERR) parameters at the delamination front to feed into acceptability criteria.

  10. Response problems in a vacation panel study

    Science.gov (United States)

    Christine A. Vogt; Susan I. Stewart

    2001-01-01

    This paper investigates response problems encountered in a panel study of travel behavior. Though the overall response rate to the three-wave panel study was acceptable (over 60%), three types of response problems were encountered: refusal, non-response, and attrition. In a follow-up phone survey, a sample of individuals from each problem response group was questioned...

  11. 78 FR 42982 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-07-18

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meetings SUMMARY... hereby given one meeting of the Arts Advisory Panel to the National Council on the Arts will be held at...

  12. 77 FR 61643 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-10-10

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that sixteen meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  13. 78 FR 17942 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-03-25

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meetings. SUMMARY... hereby given that five meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  14. 78 FR 59978 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-09-30

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  15. 77 FR 49026 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-08-15

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  16. 78 FR 21978 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-04-12

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... is hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will...

  17. 78 FR 26399 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-05-06

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting. SUMMARY... hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  18. 77 FR 13154 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-03-05

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice--meeting. Pursuant to... given that a meeting of the Arts Advisory Panel to the National Council on the Arts will be held by...

  19. 77 FR 67836 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-11-14

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting. SUMMARY... hereby given that fifteen meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  20. 78 FR 5213 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-01-24

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  1. 77 FR 75672 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-12-21

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting. SUMMARY... hereby given that seven meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  2. 77 FR 41808 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-07-16

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that two meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  3. 78 FR 68099 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-11-13

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting. SUMMARY... hereby given that twenty- one meetings of the Arts Advisory Panel to the National Council on the Arts...

  4. 78 FR 50451 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-08-19

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meetings. SUMMARY... hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  5. 77 FR 56875 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-09-14

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that two meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  6. 77 FR 13367 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-03-06

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that a meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  7. Robust block bootstrap panel predictability tests

    NARCIS (Netherlands)

    Westerlund, J.; Smeekes, S.

    2013-01-01

    Most panel data studies of the predictability of returns presume that the cross-sectional units are independent, an assumption that is not realistic. As a response to this, the current paper develops block bootstrap-based panel predictability tests that are valid under very general conditions. Some

  8. Air loads on solar panels during launch

    NARCIS (Netherlands)

    Beltman, W.M.; van der Hoogt, Peter; Spiering, R.M.E.J.; Tijdeman, H.

    1996-01-01

    The dynamical behaviour of solar panels during launch is significantly affected by the thin layers of air trapped between the panels. For narrow gaps the air manifests itself not only as a considerable added mass, but its viscosity can result in a substantial amount of damping. A model has been

  9. Circuits in the Sun: Solar Panel Physics

    Science.gov (United States)

    Gfroerer, Tim

    2013-01-01

    Typical commercial solar panels consist of approximately 60 individual photovoltaic cells connected in series. Since the usual Kirchhoff rules apply, the current is uniform throughout the circuit, while the electric potential of the individual devices is cumulative. Hence, a solar panel is a good analog of a simple resistive series circuit, except…

  10. Forced sound transmission through a finite-sized single leaf panel subject to a point source excitation.

    Science.gov (United States)

    Wang, Chong

    2018-03-01

    In the case of a point source in front of a panel, the wavefront of the incident wave is spherical. This paper discusses spherical sound waves transmitting through a finite sized panel. The forced sound transmission performance that predominates in the frequency range below the coincidence frequency is the focus. Given the point source located along the centerline of the panel, forced sound transmission coefficient is derived through introducing the sound radiation impedance for spherical incident waves. It is found that in addition to the panel mass, forced sound transmission loss also depends on the distance from the source to the panel as determined by the radiation impedance. Unlike the case of plane incident waves, sound transmission performance of a finite sized panel does not necessarily converge to that of an infinite panel, especially when the source is away from the panel. For practical applications, the normal incidence sound transmission loss expression of plane incident waves can be used if the distance between the source and panel d and the panel surface area S satisfy d/S>0.5. When d/S ≈0.1, the diffuse field sound transmission loss expression may be a good approximation. An empirical expression for d/S=0  is also given.

  11. Genetic Counselors' Experiences Regarding Communication of Reproductive Risks with Autosomal Recessive Conditions found on Cancer Panels.

    Science.gov (United States)

    Mets, Sarah; Tryon, Rebecca; Veach, Patricia McCarthy; Zierhut, Heather A

    2016-04-01

    The development of hereditary cancer genetic testing panels has altered genetic counseling practice. Mutations within certain genes on cancer panels pose not only a cancer risk, but also a reproductive risk for autosomal recessive conditions such as Fanconi anemia, constitutional mismatch repair deficiency syndrome, and ataxia telangiectasia. This study aimed to determine if genetic counselors discuss reproductive risks for autosomal recessive conditions associated with genes included on cancer panels, and if so, under what circumstances these risks are discussed. An on-line survey was emailed through the NSGC list-serv. The survey assessed 189 cancer genetic counselors' experiences discussing reproductive risks with patients at risk to carry a mutation or variant of uncertain significance (VUS) in a gene associated with both an autosomal dominant cancer risk and an autosomal recessive syndrome. Over half (n = 82, 55 %) reported having discussed reproductive risks; the remainder (n = 66, 45 %) had not. Genetic counselors who reported discussing reproductive risks primarily did so when patients had a positive result and were of reproductive age. Reasons for not discussing these risks included when a patient had completed childbearing or when a VUS was identified. Most counselors discussed reproductive risk after obtaining results and not during the informed consent process. There is inconsistency as to if and when the discussion of reproductive risks is taking place. The wide variation in responses suggests a need to develop professional guidelines for when and how discussions of reproductive risk for autosomal recessive conditions identified through cancer panels should occur with patients.

  12. Differing professional opinions: 1987 special review panel

    International Nuclear Information System (INIS)

    1988-01-01

    In November 1987, the five-member Differing Professional Opinions Special Review Panel established by the Executive Director for Operations of the US Nuclear Regulatory Commission to review agency policies and procedures for handling differing professional opinions (DPOs) presented its findings and recommendations in NUREG-1290. The issuance of that report completed the first task of the panel's charter. In accordance with Manual chapter 4125, Section L, and the charter of the Special Review Panel, the panel's second task was to ''...review...the DPOs submitted subsequent to the previous Panel's review, in order to identify any employee whose DPO made a significant contribution to the Agency or to the public safety but who has not yet been recognized for such contribution.'' This Addendum provides the findings of that review

  13. Graphite/epoxy orthogrid panel fabrication

    Science.gov (United States)

    Lager, J. R.

    1978-01-01

    The structural concept considered for a spacecraft body structure is a grid stiffened skin with a skin laminate configuration and the stiffener grid geometry selected to best suit the design requirements. The orthogrid panel developed weighs 0.55 lb/sq ft and resisted an ultimate in-plane shear load of 545 lbf/in. The basic concept of a grid stiffener composite panel is that a relatively thin skin is reinforced with a gridwork of stiffeners so that the overall panel can resist design loads without becoming structurally unstable or being overstressed. The main feature of the orthogrid panel design is that it provides the potential for low cost structural panels when advanced to the production phase. The most innovative part of the fabrication method is the foam/fiberglass stiffener web grid billet fabrication and machining to size.

  14. The Atomic Safety and Licensing Board Panel

    International Nuclear Information System (INIS)

    1998-01-01

    Through the Atomic Energy Act, Congress made is possible for the public to get a full and fair hearing on civilian nuclear matters. Individuals who are directly affected by any licensing action involving a facility producing or utilizing nuclear materials may participate in a formal hearing, on the record, before independent judges on the Atomic Safety and Licensing Board Panel (ASLBP or Panel). Frequently, in deciding whether a license, permit, amendment, or extension should be granted to a particular applicant, the Panel members must be more than mere umpires. If appropriate, they are authorized to go beyond the issues the parties place before them in order to identify, explore, and resolve significant questions involving threats to the public health and safety that come to a board's attention during the proceedings. This brochure explains the purpose of the panel. Also addressed are: type of hearing handled; method of public participation; formality of hearings; high-level waste; other panel responsibilities and litigation technology

  15. Thin film photovoltaic panel and method

    Science.gov (United States)

    Ackerman, Bruce; Albright, Scot P.; Jordan, John F.

    1991-06-11

    A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

  16. Report of the Federal Internetworking Requirements Panel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-05-31

    The Federal Internetworking Requirements Panel (FIRP) was established by the National Institute of Standards and Technology (NIST) to reassess Federal requirements for open systems networks and to recommend policy on the Government`s use of networking standards. The Panel was chartered to recommend actions which the Federal Government can take to address the short and long-term issues of interworking and convergence of networking protocols--particularly the Internet Protocol Suite (IPS) and Open Systems Interconnection (OSI) protocol suite and, when appropriate, proprietary protocols. The Panel was created at the request of the Office of Management and Budget in collaboration with the Federal Networking Council and the Federal Information Resources Management Policy Council. The Panel`s membership and charter are contained in an appendix to this report.

  17. Photoelectric panel with equatorial mounting of drive

    Science.gov (United States)

    Kukhta, M. S.; Krauinsh, P. Y.; Krauinsh, D. P.; Sokolov, A. P.; Mainy, S. B.

    2018-03-01

    The relevance of the work is determined by the need to create effective models for sunny energy. The article considers a photoelectric panel equipped with a system for tracking the sun. Efficiency of the system is provided by equatorial mounting, which compensates for the rotation of the Earth by rotating the sunny panel in the plane of the celestial equator. The specificity of climatic and geographical conditions of Tomsk is estimated. The dynamics of power variations of photoelectric panels with equatorial mounting during seasonal fluctuations in Tomsk is calculated. A mobile photovoltaic panel with equatorial mounting of the drive has been developed. The methods of design strategy for placing photovoltaic panels in the architectural environment of the city are presented. Key words: sunny energy, photovoltaics, equatorial mounting, mechatronic model, wave reducer, electric drive.

  18. Gene panel testing for inherited cancer risk.

    Science.gov (United States)

    Hall, Michael J; Forman, Andrea D; Pilarski, Robert; Wiesner, Georgia; Giri, Veda N

    2014-09-01

    Next-generation sequencing technologies have ushered in the capability to assess multiple genes in parallel for genetic alterations that may contribute to inherited risk for cancers in families. Thus, gene panel testing is now an option in the setting of genetic counseling and testing for cancer risk. This article describes the many gene panel testing options clinically available to assess inherited cancer susceptibility, the potential advantages and challenges associated with various types of panels, clinical scenarios in which gene panels may be particularly useful in cancer risk assessment, and testing and counseling considerations. Given the potential issues for patients and their families, gene panel testing for inherited cancer risk is recommended to be offered in conjunction or consultation with an experienced cancer genetic specialist, such as a certified genetic counselor or geneticist, as an integral part of the testing process. Copyright © 2014 by the National Comprehensive Cancer Network.

  19. Micro-inverter solar panel mounting

    Science.gov (United States)

    Morris, John; Gilchrist, Phillip Charles

    2016-02-02

    Processes, systems, devices, and articles of manufacture are provided. Each may include adapting micro-inverters initially configured for frame-mounting to mounting on a frameless solar panel. This securement may include using an adaptive clamp or several adaptive clamps secured to a micro-inverter or its components, and using compressive forces applied directly to the solar panel to secure the adaptive clamp and the components to the solar panel. The clamps can also include compressive spacers and safeties for managing the compressive forces exerted on the solar panels. Friction zones may also be used for managing slipping between the clamp and the solar panel during or after installation. Adjustments to the clamps may be carried out through various means and by changing the physical size of the clamps themselves.

  20. Noise Reduction in Double‿Panel Structures by Cavity and Panel Resonance Control

    OpenAIRE

    Ho, J.; Berkhoff, Arthur P.

    2011-01-01

    This paper presents an investigation of the cavity and the panel resonance control in a double‿panel structure. The double‿panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective transmission‿loss at high frequency. However, the resonance of the cavity and the poor transmission‿loss at low frequency limit its noise control performance. Applying active control forces on the panels or utili...

  1. Acoustically Tailored Composite Rotorcraft Fuselage Panels

    Science.gov (United States)

    Hambric, Stephen; Shepherd, Micah; Koudela, Kevin; Wess, Denis; Snider, Royce; May, Carl; Kendrick, Phil; Lee, Edward; Cai, Liang-Wu

    2015-01-01

    A rotorcraft roof sandwich panel has been redesigned to optimize sound power transmission loss (TL) and minimize structure-borne sound for frequencies between 1 and 4 kHz where gear meshing noise from the transmission has the most impact on speech intelligibility. The roof section, framed by a grid of ribs, was originally constructed of a single honeycomb core/composite face sheet panel. The original panel has coincidence frequencies near 700 Hz, leading to poor TL across the frequency range of 1 to 4 kHz. To quiet the panel, the cross section was split into two thinner sandwich subpanels separated by an air gap. The air gap was sized to target the fundamental mass-spring-mass resonance of the double panel system to less than 500 Hz. The panels were designed to withstand structural loading from normal rotorcraft operation, as well as 'man-on-the-roof' static loads experienced during maintenance operations. Thin layers of VHB 9469 viscoelastomer from 3M were also included in the face sheet ply layups, increasing panel damping loss factors from about 0.01 to 0.05. Measurements in the NASA SALT facility show the optimized panel provides 6-11 dB of acoustic transmission loss improvement, and 6-15 dB of structure-borne sound reduction at critical rotorcraft transmission tonal frequencies. Analytic panel TL theory simulates the measured performance quite well. Detailed finite element/boundary element modeling of the baseline panel simulates TL slightly more accurately, and also simulates structure-borne sound well.

  2. RETHINKING STAKEHOLDER ENGAGEMENT AND TECHNOLOGY ACCESS IN HEALTH TECHNOLOGY ASSESSMENT: REACTIONS TO POLICY FORUM DISCUSSIONS.

    Science.gov (United States)

    Sampietro-Colom, Laura; Thomas, Sarah

    2016-01-01

    The need to progress and innovate in health technology assessment (HTA) is a must in a continuously changing environment. The HTAi Policy Forum reflected on two specific areas for development where it was thought there was need for careful consideration and deliberation during the main annual meeting in February 2016. The study by Husereau et al. (1) in this journal presents the discussions resulting from this Forum. To further share the deliberations of the Forum and with a view to opening this debate to the wider HTA community, a panel session during the HTAi Annual Meeting in Tokyo was organized. Presentations at the panel included a summary of the HTAi Policy Forum discussions and perspectives from a patient, a representative of healthcare system provider, and a representative from an HTA organization and industry. This letter presents the issues raised in the panel session.

  3. Graphite Composite Panel Polishing Fixture

    Science.gov (United States)

    Hagopian, John; Strojny, Carl; Budinoff, Jason

    2011-01-01

    The use of high-strength, lightweight composites for the fixture is the novel feature of this innovation. The main advantage is the light weight and high stiffness-to-mass ratio relative to aluminum. Meter-class optics require support during the grinding/polishing process with large tools. The use of aluminum as a polishing fixture is standard, with pitch providing a compliant layer to allow support without deformation. Unfortunately, with meter-scale optics, a meter-scale fixture weighs over 120 lb (.55 kg) and may distort the optics being fabricated by loading the mirror and/or tool used in fabrication. The use of composite structures that are lightweight yet stiff allows standard techniques to be used while providing for a decrease in fixture weight by almost 70 percent. Mounts classically used to support large mirrors during fabrication are especially heavy and difficult to handle. The mount must be especially stiff to avoid deformation during the optical fabrication process, where a very large and heavy lap often can distort the mount and optic being fabricated. If the optic is placed on top of the lapping tool, the weight of the optic and the fixture can distort the lap. Fixtures to support the mirror during fabrication are often very large plates of aluminum, often 2 in. (.5 cm) or more in thickness and weight upwards of 150 lb (68 kg). With the addition of a backing material such as pitch and the mirror itself, the assembly can often weigh over 250 lb (.113 kg) for a meter-class optic. This innovation is the use of a lightweight graphite panel with an aluminum honeycomb core for use as the polishing fixture. These materials have been used in the aerospace industry as structural members due to their light weight and high stiffness. The grinding polishing fixture consists of the graphite composite panel, fittings, and fixtures to allow interface to the polishing machine, and introduction of pitch buttons to support the optic under fabrication. In its

  4. Digital radiography with large-area flat-panel detectors

    International Nuclear Information System (INIS)

    Kotter, E.; Langer, M.

    2002-01-01

    Large-area flat-panel detectors with active readout mechanisms have been on the market for the past 2 years. This article describes different detector technologies. An important distinction is made between detectors with direct and those with indirect conversion of X-rays into electrical charges. Detectors with indirect conversion are built with unstructured or structured scintillators, the latter resulting in less lateral diffusion of emitted light. Some important qualities of flat-panel detectors are discussed. The first phantom and clinical studies published report an image quality at least comparable to that of screen-film systems and a potential for dose reduction. The available studies are summarised in this article. (orig.)

  5. Development of an Electrostatically Clean Solar Array Panel

    Science.gov (United States)

    Stern, Theodore G.; Krumweide, Duane; Gaddy, Edward; Katz, Ira

    2000-01-01

    The results of design, analysis, and qualification of an Electrostatically Clean Solar Array (ECSA) panel are described. The objective of the ECSA design is to provide an electrostatic environment that does not interfere with sensitive instruments on scientific spacecraft. The ECSA design uses large, ITO-coated coverglasses that cover multiple solar cells, an aperture grid that covers the intercell areas, stress-relieved interconnects for connecting the aperture grid to the coverglasses, and edge clips to provides an electromagnetically shielded enclosure for the solar array active circuitry. Qualification coupons were fabricated and tested for photovoltaic response, conductivity, and survivability to launch acoustic and thermal cycling environments simulating LEO and GEO missions. The benefits of reducing solar panel interaction with the space environment are also discussed.

  6. TU-A-BRB-02: Panel Member

    International Nuclear Information System (INIS)

    Ma, L.

    2016-01-01

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

  7. TU-A-BRB-03: Panel Member

    International Nuclear Information System (INIS)

    Winey, B.

    2016-01-01

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

  8. Panel 1 - comparative evaluation of deposition technologies

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, G.R.; Stodolsky, F. [Argonne National Lab., IL (United States); Benson, D.K.; Pitts, R.J. [National Renewable Energy Lab., Golden, CO (United States); Bhat, D.G. [GTE Valenite Corp., Troy, MI (United States); Yulin Chen [Allison Gas Turbine Division, GM, Indianapolis, IN (United States); Gat, R.; Sunkara, M.K. [Case Western Reserve Univ., Cleveland, OH (United States); Kelly, M. [Stanford Univ., CA (United States); Lawler, J.E. [Univ. of Wisconsin, Madison (United States); Nagle, D.C. [Martin Marietta Labs., Baltimore, MD (United States); Outka, D. [Sandia National Laboratories, Livermore, CA (United States); Revankar, G.S. [Deere & Co., Moline, IL (United States); Subramaniam, V.V. [Ohio State Univ., Columbus (United States); Wilbur, P.J. [Colorado State Univ., Fort Collins (United States); Mingshow Wong [Northwestern Univ., Evanston, IL (United States); Woolam, W.E. [Southwest Research Inst., Arlington, VA (United States)

    1993-01-01

    This working group attempted to evaluate/compare the different types of deposition techniques currently under investigation for depositing diamond and diamond-like carbon films. A table lists the broad types of techniques that were considered for depositing diamond and diamond-like carbon films. After some discussion, it was agreed that any evaluation of the various techniques would be dependent on the end application. Thus the next action was to list the different areas where diamond and DLC films could find applications in transportation. These application areas are listed in a table. The table intentionally does not go into great detail on applications because that subject is dealt with specifically by Panel No. 4 - Applications To Transportation. The next action concentrated on identifying critical issues or limitations that need to be considered in evaluating the different processes. An attempt was then made to rank different broad categories of deposition techniques currently available or under development based on the four application areas and the limitations. These rankings/evaluations are given for diamond and DLC techniques. Finally, the working group tried to identify critical development and research issues that need to be incorporated into developing a long-term program that focuses on diamond/DLC coatings for transportation needs. 5 tabs.

  9. TU-A-BRB-02: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Ma, L. [UCSF Comprehensive Cancer Center (United States)

    2016-06-15

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

  10. TU-A-BRB-03: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Winey, B. [Massachusetts General Hospital (United States)

    2016-06-15

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

  11. TU-A-BRB-01: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Schlesinger, D. [University of Virginia Health Systems (United States)

    2016-06-15

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

  12. TU-A-BRB-01: Panel Member

    International Nuclear Information System (INIS)

    Schlesinger, D.

    2016-01-01

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

  13. Electrochemistry and Storage Panel Report

    Science.gov (United States)

    Stedman, J. K.; Halpert, G.

    1984-01-01

    Design and performance requirements for electrochemical power storage systems are discussed and some of the approaches towards satisfying these constraints are described. Geosynchronous and low Earth orbit applications, radar type load constraints, and high voltage systems requirements are addressed. In addition, flywheel energy storage is discussed.

  14. PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

    Directory of Open Access Journals (Sweden)

    Syafaruddin Ch

    2010-07-01

    Full Text Available The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker  capable of follo-wing the movements of the sun. Then conducted a test to see the performance of solar cell pa-nel  tracker  and compare it with the performance of solar cell panel was motionless. The testing doing along 6 days, with way to irradiate the panel of solar cells  tracker  and panels of solar cell motionless with sun exposure  along a  full day. Then the electric current generated each panel were recorded. The comparison of current then generating comparison of electric power delivery. The result show that the solar cell panel  tracker  produce the average current is 2.19 A whereas solar-cell panel still 1.97 A.  This result   indicate that average power for solar cell panel  tracker  39.41 W while for solar cell panel that motionless is  35.46 W. These results indicate that the performance of solar cell panel  tracker  better than  solar cell panel motionless.

  15. PVT Panels. Fully renewable and competitive

    International Nuclear Information System (INIS)

    Bakker, M.; Strootman, K.J.; Jong, M.J.M.

    2003-10-01

    A photovoltaic/thermal (PVT) panel is a combination of photovoltaic cells with a solar thermal collector, generating solar electricity and solar heat simultaneously. PVT panels generate more solar energy per unit surface area than a combination of separate PV panels and solar thermal collectors, and share the aesthetic advantage of PV. After several years of research, PVT panels have been developed into a product that is now ready for market introduction. One of the most promising system concepts, consisting of 25 m 2 of PVT panels and a ground coupled heat pump, has been simulated in TRNSYS, and has been found to be able to fully cover both the building related electricity and heat consumption, while keeping the long-term average ground temperature constant. The cost and payback time of such a system have been determined; it has been found that the payback time of this system is approximately two-thirds of the payback time of an identical system but with 21 m 2 of PV panels and 4 m 2 of solar thermal collectors. Finally, by looking at the expected growth in the PV and solar thermal collector market, the market potential for for PVT panels has been found to be very large

  16. 76 FR 19147 - Aerospace Safety Advisory Panel; Meeting.

    Science.gov (United States)

    2011-04-06

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-030)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel.... Kathy Dakon, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

  17. 76 FR 62455 - Aerospace Safety Advisory Panel; Meeting

    Science.gov (United States)

    2011-10-07

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-088)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel... Burch, Aerospace Safety Advisory Panel Administrative Officer, National Aeronautics and Space...

  18. 78 FR 56941 - Aerospace Safety Advisory Panel; Meeting

    Science.gov (United States)

    2013-09-16

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 13-114] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

  19. 77 FR 25502 - Aerospace Safety Advisory Panel; Meeting

    Science.gov (United States)

    2012-04-30

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (12-030)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel... FURTHER INFORMATION CONTACT: Ms. Harmony Myers, Aerospace Safety Advisory Panel Executive Director...

  20. 77 FR 38090 - Aerospace Safety Advisory Panel; Meeting.

    Science.gov (United States)

    2012-06-26

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-044] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

  1. 78 FR 1265 - Aerospace Safety Advisory Panel; Meeting

    Science.gov (United States)

    2013-01-08

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-001] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel..., Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space Administration...

  2. 75 FR 6407 - Aerospace Safety Advisory Panel; Meeting

    Science.gov (United States)

    2010-02-09

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10- 020)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel... FURTHER INFORMATION CONTACT: Ms. Kathy Dakon, Aerospace Safety Advisory Panel Executive Director, National...

  3. 75 FR 61219 - Aerospace Safety Advisory Panel; Meeting

    Science.gov (United States)

    2010-10-04

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-116)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel... Dakon, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space Administration...

  4. 77 FR 58413 - Aerospace Safety Advisory Panel; Meeting

    Science.gov (United States)

    2012-09-20

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-074] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

  5. Selling Albertans short : Alberta's royalty review panel fails the public interest

    International Nuclear Information System (INIS)

    Gibson, D.

    2007-10-01

    This document commented on the release of Alberta's 2007 Royalty Review Panel regarding the province's royalty system for petroleum and oil sands development. It argued that the report does not fulfill the spirit of Alberta's royalty system, which is to expect nothing less than 100 per cent of the rent collection. This document provided an analysis of the set of recommendations made by the panel. It began with a general discussion of the problems in which the royalties review was structured and flaws in the base assumptions made by the panel. It also provided an analysis of the specific recommendations within the panel's report. Last, the report proposed a set of recommendations on how a royalties reform should proceed. The authors found specific recommendations Alberta's 2007 Royalty Review Panel report to be problematic. These included the 1 per cent royalty holiday on tar sands oil; higher net royalty rate; windfall profits tax; coal bed methane and cuts in royalties for low producing wells; and value added incentives. It was concluded that the panel's report was a compromise between the public interest and those of the oil and gas sector and that the panel's goal of ensuring that Alberta remained one of the lowest tax and royalty jurisdictions in the world was fundamentally flawed. 32 refs., 4 figs

  6. Performance power evaluation of DC fan cooling system for PV panel by using ANSYS CFX

    Science.gov (United States)

    Syafiqah, Z.; Amin, N. A. M.; Irwan, Y. M.; Irwanto, M.; Leow, W. Z.; Amelia, A. R.

    2017-09-01

    A research has been conducted to find the optimum combination for DC fan air cooling system of photovoltaic (PV) panel. During normal operation of PV panel, it is estimated that only 15 % of solar radiation is converted into electrical energy. Meanwhile, the rest of the solar radiation is converted into heat energy which affects the performance of the PV panel. Therefore, the aim of this research is to investigate the performance power evaluation of DC fan cooling system for PV panel by using ANSYS CFX. The effect of airflow configuration of DC fan has been investigated. This is to analyze whether the airflow circulation of DC fan cause a change towards the maximum temperature of PV panel. Besides, the impact of varying number of DC fans attached at the back of PV panel is evaluated. The result of airflow circulation of DC fan has been discussed. Meanwhile, with the increment number of DC fans, the PV panel temperature drops significantly. As a conclusion, the optimum number of DC fans is two with the combination of inlet airflow.

  7. Table ronde "linguistique et sociologie du langage" (A Round Table Discussion "Linguistics and Sociology of Language")

    Science.gov (United States)

    Bourdieu, Pierre; And Others

    1977-01-01

    A panel discussion on sociology and language which leads one to think that a relationship between linguistics and sociolinguistics could be effected if linguists would consent to move toward a situation in which linguistics and sociolinguistics would establish a definite bond with sociology. (Text is in French.) (AMH)

  8. Predicting panel scores by linguistic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Van den Besselaar, P.; Stout, L.; Gou, X

    2016-07-01

    In this paper we explore the use of text analysis for deriving quality indicators of project proposals. We do full text analysis of 3030 review reports. After term extraction, we aggregate the term occurrences to linguistic categories. Using thse linguistic categories as independent variables, we study how well these predict the grading by the review panels. Together, the different linguistic categories explain about 50% of the variance in the grading of the applications. The relative importance of the different linguistic categories inform us about the way the panels work. This can be used to develop altmetrics for the quality of the peer and panel review processes. (Author)

  9. Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development

    Energy Technology Data Exchange (ETDEWEB)

    Pschirer, James [Alstom Power Inc., Windsor, CT (United States); Burgess, Joshua [Alstom Power Inc., Windsor, CT (United States); Schrecengost, Robert [Alstom Power Inc., Windsor, CT (United States)

    2017-08-16

    Alstom Power Inc., a wholly owned subsidiary of the General Electric Company (GE), has completed the project “Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development” under U.S. Department of Energy (DOE) Award Number DE-FE0024076. This project was part of DOE’s Novel Crosscutting Research and Development to Support Advanced Energy Systems program. AUSC Tube Membrane Panel Development was a two and one half year project to develop and verify the manufacturability and serviceability of welded tube membrane panels made from high performance materials suitable for the AUSC steam cycles, defined as high pressure steam turbine inlet conditions of 700-760°C (1292-1400°F) and 24.5-35MPa (3500-5000psi). The difficulty of this challenge lies in the fact that the membrane-welded construction imposes demands on the materials that are unlike any that exist in other parts of the boiler. Tube membrane panels have been designed, fabricated, and installed in boilers for over 50 years with relatively favorable experience when fabricated from carbon and Cr-Mo low alloy steels. The AUSC steam cycle requires membrane tube panels fabricated from materials that have not been used in a weldment with metal temperatures in the range of 582-610°C (1080-1130°F). Fabrication materials chosen for the tubing were Grade 92 and HR6W. Grade 92 is a creep strength enhanced ferritic Cr-Mo alloy and HR6W is a high nickel alloy. Once the materials were chosen, GE performed the engineering design of the panels, prepared shop manufacturing drawings, and developed manufacturing and inspection plans. After the materials were purchased, GE manufactured and inspected the tube membrane panels, determined if post fabrication heat treatment of the tube membrane panels was needed, performed pre- and post-weld heat treatment on the Grade 92 panels, conducted final nondestructive inspection of any heat treated tube membrane panels, conducted destructive inspection of the completed tube

  10. Flat or curved thin optical display panel

    Science.gov (United States)

    Veligdan, J.T.

    1995-01-10

    An optical panel includes a plurality of waveguides stacked together, with each waveguide having a first end and an opposite second end. The first ends collectively define a first face, and the second ends collectively define a second face of the panel. The second face is disposed at an acute face angle relative to the waveguides to provide a panel which is relatively thin compared to the height of the second face. In an exemplary embodiment for use in a projection TV, the first face is substantially smaller in height than the second face and receives a TV image, with the second face defining a screen for viewing the image enlarged. 7 figures.

  11. KUALITAS AKUSTIK PANEL DINDING BERBAHAN BAKU JERAMI

    Directory of Open Access Journals (Sweden)

    Christina E. Mediastika

    2008-01-01

    Full Text Available A series of study to explore possibility in using paddy-straw as main material to construct cheap and high quality panels has been developed. Prior to this study, laboratory research to examine strength of compression and tensile of the panels have been conducted, which is showed a significant value for a non-structural panel. The compression is 15 N/mm2 and tensile averaged at 0,5 N/mm2 . In this study, acoustic properties of the panels is to be examined, i.e.: transmission loss (TL, absorption coefficient (, and reverberation time (RT60. The test showed TL of 10 dB and 16 dB,  of 0,4 and 0,8 and improve RT60 from 0,88 sec to 0,35 sec and 0,16 sec (500 Hz is used for reference. Abstract in Bahasa Indonesia: Ketersediaan panel pelapis dinding yang bersifat akustik dengan harga yang lebih terjangkau seperti yang terbuat dari bahan limbah sangatlah penting. Pada penelitian awal telah diselidiki penggunaan jerami sebagai bahan baku pembuatan panel akustik, sekaligus telah dilakukan pengujian terhadap kareakteristik struktural (uji desak dan lentur dari panel tersebut. Dari uji kekuatan struktural, panel memiliki kekuatan desak mencapai 15 N/mm2 dan kuat lentur reta-rata 0,5 N/mm2. Kekuatan ini dianggap mencukupi bagi panel non-struktural yang hanya bertugas untuk memikul beban sendiri. Oleh karena tujuan awal pembuatan panel adalah untuk kepentingan akustik, maka pada penelitian lanjutan, dilakukan uji laboratorium dan lapangan untuk melihat karakterisktik akustiknya. Adapun pengujian meliputi: redaman/insulasi (TL, koefisien serap ( dan waktu dengung (RT60. Dari hasil pengujian, panel mempunyai TL 10 dB dan 16 dB,  0,4 dan 0,8, serta mampu memperbaiki RT60 ruangan dari 0,88 detik menjadi 0,35 detik dan 0,16 detik. Kesemua pengujian menggunakan band frekuensi 500 Hz sebagai acuan. Kata kunci: panel jerami, insulasi, koefisien serap, waktu dengung.

  12. Differing professional opinions: 1987 Special Review Panel

    International Nuclear Information System (INIS)

    1987-11-01

    In mid-1987, the Executive Director for Operations of the US Nuclear Regulatory Commission appointed a Special Review Panel to review the existing NRC policy for expressing differing professional views and to recommend possible improvements to the policy, if warranted. Through its own efforts and those of three subpanels and three consultants, the Panel developed recommendations for changes and improvements in five major areas. This report presents those recommendations, along with a detailed explanation of the Panel's findings, copies of the reports of the subpanels and consultants, and the results of a survey of NRC non-clerical employees on the issue

  13. A review of sensing technologies for small and large-scale touch panels

    Science.gov (United States)

    Akhtar, Humza; Kemao, Qian; Kakarala, Ramakrishna

    2017-06-01

    A touch panel is an input device for human computer interaction. It consists of a network of sensors, a sampling circuit and a micro controller for detecting and locating a touch input. Touch input can come from either finger or stylus depending upon the type of touch technology. These touch panels provide an intuitive and collaborative workspace so that people can perform various tasks with the use of their fingers instead of traditional input devices like keyboard and mouse. Touch sensing technology is not new. At the time of this writing, various technologies are available in the market and this paper reviews the most common ones. We review traditional designs and sensing algorithms for touch technology. We also observe that due to its various strengths, capacitive touch will dominate the large-scale touch panel industry in years to come. In the end, we discuss the motivation for doing academic research on large-scale panels.

  14. The digital flat-panel X-Ray detectors

    International Nuclear Information System (INIS)

    Risticj, S. Goran

    2013-01-01

    In a digital imaging system, the incident x-ray image must be sampled both in the spatial and intensity dimensions. In the spatial dimensions, samples are obtained as averages of the intensity over picture elements or pixels. In the intensity dimension, the signal is digitalized into one of a finite number of levels or bits. Two main types of digital flat-panel detectors are based on the direct conversion, which contains the photoconductor, and on indirect conversion, which contains phosphor. The basics of these detectors are given. Coupling traditional x-ray detection material such as photoconductors and phosphors with a large-area active-matrix readout structure forms the basis of flat panel x-ray images. Active matrix technology provides a new, highly efficient, real time method for electronically storing and measuring the product of the x-ray interaction stage whether the product is visible wavelength photons or electrical charges. The direct and indirect detectors, made as the active-matrix flat-panel detectors containing sensing/storage elements, switching elements (diodes or thin film transistors (TFTS)) and image processing module, are described. Strengths and limitations of stimulable phosphors are discussed. The main advantages and disadvantages of mentioned x-ray detectors are also analyzed. (Author)

  15. Moonshot Panel Moving Toward Final Report

    Science.gov (United States)

    An NCI Cancer Currents blog from acting NCI Director Dr. Doug Lowy providing an update on the activities of the National Cancer Moonshot Initiative’s Blue Ribbon Panel and its work to develop a final report.

  16. Panel data analysis of cardiotocograph (CTG) data.

    Science.gov (United States)

    Horio, Hiroyuki; Kikuchi, Hitomi; Ikeda, Tomoaki

    2013-01-01

    Panel data analysis is a statistical method, widely used in econometrics, which deals with two-dimensional panel data collected over time and over individuals. Cardiotocograph (CTG) which monitors fetal heart rate (FHR) using Doppler ultrasound and uterine contraction by strain gage is commonly used in intrapartum treatment of pregnant women. Although the relationship between FHR waveform pattern and the outcome such as umbilical blood gas data at delivery has long been analyzed, there exists no accumulated FHR patterns from large number of cases. As time-series economic fluctuations in econometrics such as consumption trend has been studied using panel data which consists of time-series and cross-sectional data, we tried to apply this method to CTG data. The panel data composed of a symbolized segment of FHR pattern can be easily handled, and a perinatologist can get the whole FHR pattern view from the microscopic level of time-series FHR data.

  17. JTEC panel on display technologies in Japan

    Science.gov (United States)

    Tannas, Lawrence E., Jr.; Glenn, William E.; Credelle, Thomas; Doane, J. William; Firester, Arthur H.; Thompson, Malcolm

    1992-01-01

    This report is one in a series of reports that describes research and development efforts in Japan in the area of display technologies. The following are included in this report: flat panel displays (technical findings, liquid crystal display development and production, large flat panel displays (FPD's), electroluminescent displays and plasma panels, infrastructure in Japan's FPD industry, market and projected sales, and new a-Si active matrix liquid crystal display (AMLCD) factory); materials for flat panel displays (liquid crystal materials, and light-emissive display materials); manufacturing and infrastructure of active matrix liquid crystal displays (manufacturing logistics and equipment); passive matrix liquid crystal displays (LCD basics, twisted nematics LCD's, supertwisted nematic LCD's, ferroelectric LCD's, and a comparison of passive matrix LCD technology); active matrix technology (basic active matrix technology, investment environment, amorphous silicon, polysilicon, and commercial products and prototypes); and projection displays (comparison of Japanese and U.S. display research, and technical evaluation of work).

  18. F-111 Bonded Panel Repair Status

    National Research Council Canada - National Science Library

    Rider, Andrew

    1999-01-01

    A visit was made to Amberley Airbase between the 6th and 9th of September to consult with RAAF staff on current procedures and problems involved in the maintenance and repair of F-lll honeycomb panels...

  19. Integrally rigidized acoustic interior spacecraft panel

    Science.gov (United States)

    1976-01-01

    A sandwich panel concept is described which utilizes a monolithic I-beam design as the core. The core and skins are integrally bonded with thermosetting resin into a homogeneous structure. In addition to possessing a high strength to weight ratio, the panel resists combustion, delamination, aging due to fatigue, localized stresses, and exhibits good acoustic properties. Since the panel concept has definite potential as a high flame retardant and low smoke emission panel with excellent structural integrity, aerospace materials were used to optimize the construction for highly demanding space shuttle applications. The specific materials of construction were chosen for low flammability and off-gassing properties as well as for strength, light weight, and sound dampening.

  20. Multiple Site Damage in Flat Panel Testing

    National Research Council Canada - National Science Library

    Shrage, Daniel

    2000-01-01

    This report aimed to experimentally verify analytical models that predict the residual strength of representative aircraft structures, such as wide panels, that are subjected to Multiple Site Damage (MSD...

  1. Behavior of sandwich panels in a fire

    Science.gov (United States)

    Chelekova, Eugenia

    2018-03-01

    For the last decades there emerged a vast number of buildings and structures erected with the use of sandwich panels. The field of application for this construction material is manifold, especially in the construction of fire and explosion hazardous buildings. In advanced evacu-ation time calculation methods the coefficient of heat losses is defined with dire regard to fire load features, but without account to thermal and physical characteristics of building envelopes, or, to be exact, it is defined for brick and concrete walls with gross heat capacity. That is why the application of the heat loss coefficient expression obtained for buildings of sandwich panels is impossible because of different heat capacity of these panels from the heat capacities of brick and concrete building envelopes. The article conducts an analysis and calculation of the heal loss coefficient for buildings and structures of three layer sandwich panels as building envelopes.

  2. Increasing the efficiency of solar thermal panels

    Science.gov (United States)

    Dobrnjac, M.; Latinović, T.; Dobrnjac, S.; Živković, P.

    2016-08-01

    The popularity of solar heating systems is increasing for several reasons. These systems are reliable, adaptable and pollution-free, because the renewable solar energy is used. There are many variants of solar systems in the market mainly constructed with copper pipes and absorbers with different quality of absorption surface. Taking into account the advantages and disadvantages of existing solutions, in order to increase efficiency and improve the design of solar panel, the innovative solution has been done. This new solar panel presents connection of an attractive design and the use of constructive appropriate materials with special geometric shapes. Hydraulic and thermotechnical tests that have been performed on this panel showed high hydraulic and structural stability. Further development of the solar panel will be done in the future in order to improve some noticed disadvantages.

  3. Panel backs next-generation synchrotron

    CERN Multimedia

    Service, R F

    1999-01-01

    A key federal panel recommended continued research into development of a fourth-generation synchrotron. It would be capable of creating x-ray pulses billions of times more intense than current designs (1 page).

  4. Ultrafast Thermal Cycling of Solar Panels

    National Research Council Canada - National Science Library

    Wall, T

    1998-01-01

    Two new cyclers that utilize a novel hybrid approach to perform fast thermal cycling of solar panels have been built and are now operational in the Mechanics and Materials Technology Center at The Aerospace Corporation...

  5. The CRRES high efficiency solar panel

    International Nuclear Information System (INIS)

    Trumble, T.M.

    1991-01-01

    This paper reports on the High Efficiency Solar Panel (HESP) experiments which is to provide both engineering and scientific information concerning the effects of space radiation on advanced gallium arsenide (GaAs) solar cells. The HESP experiment consists of an ambient panel, and annealing panel and a programmable load. This experiment, in conjunction with the radiation measurement experiments abroad the CREES, provides the first opportunity to simultaneously measure the trapped radiation belts and the results of radiation damage to solar cells. The engineering information will result in a design guide for selecting the optimum solar array characteristics for different orbits and different lifetimes. The scientific information will provide both correlation of laboratory damage effects to space damage effects and a better model for predicting effective solar cell panel lifetimes

  6. Comparison of various decentralised structural and cavity feedback control strategies for transmitted noise reduction through a double panel structure

    Science.gov (United States)

    Ho, Jen-Hsuan; Berkhoff, Arthur

    2014-03-01

    This paper compares various decentralised control strategies, including structural and acoustic actuator-sensor configuration designs, to reduce noise transmission through a double panel structure. The comparison is based on identical control stability indexes. The double panel structure consists of two panels with air in between and offers the advantages of low sound transmission at high frequencies, low heat transmission, and low weight. The double panel structure is widely used, such as in the aerospace and automotive industries. Nevertheless, the resonance of the cavity and the poor sound transmission loss at low frequencies limit the double panel's noise control performance. Applying active structural acoustic control to the panels or active noise control to the cavity has been discussed in many papers. In this paper, the resonances of the panels and the cavity are considered simultaneously to further reduce the transmitted noise through an existing double panel structure. A structural-acoustic coupled model is developed to investigate and compare various structural control and cavity control methods. Numerical analysis and real-time control results show that structural control should be applied to both panels. Three types of cavity control sources are presented and compared. The results indicate that the largest noise reduction is obtained with cavity control by loudspeakers modified to operate as incident pressure sources.

  7. Supersonic Panel Flutter Test Results for Flat Fiber-Glass Sandwich Panels with Foamed Cores

    Science.gov (United States)

    Tuovila, W. J.; Presnell, John G., Jr.

    1961-01-01

    Flutter tests have been made on flat panels having a 1/4 inch-thick plastic-foam core covered with thin fiber-glass laminates. The testing was done in the Langley Unitary Plan wind tunnel at Mach numbers from 1.76 t o 2.87. The flutter boundary for these panels was found to be near the flutter boundary of thin metal panels when compared on the basis of an equivalent panel stiffness. The results also demonstrated that the depth of the cavity behind the panel has a pronounced influence on flutter. Changing the cavity depth from 1 1/2 inches to 1/2 inch reduced the dynamic pressure at start of flutter by 40 percent. No flutter was obtained when the spacers on the back of the panel were against the bottom of the cavity.

  8. Panel Resource Management (PRM) Implementation and Effects within Safety Review Panel Settings and Dynamics

    Science.gov (United States)

    Taylor, Robert W.; Nash, Sally K.

    2007-01-01

    While technical training and advanced degree's assure proficiency at specific tasks within engineering disciplines, they fail to address the potential for communication breakdown and decision making errors familiar to multicultural environments where language barriers, intimidating personalities and interdisciplinary misconceptions exist. In an effort to minimize these pitfalls to effective panel review, NASA's lead safety engineers to the ISS Safety Review Panel (SRP), and Payload Safety Review Panel (PSRP) initiated training with their engineers, in conjunction with the panel chairs, and began a Panel Resource Management (PRM) program. The intent of this program focuses on the ability to reduce the barriers inhibiting effective participation from all panel attendees by bolstering participants confidence levels through increased communication skills, situational awareness, debriefing, and a better technical understanding of requirements and systems.

  9. Panel-basierte Mixed-Methods-Studien

    OpenAIRE

    Legewie, Nicolas; Tucci, Ingrid

    2016-01-01

    Mixed-Methods-Studien erfreuen sich wachsender Beliebtheit. Immer mehr Studien nutzen dabei auch Panel-basierte Mixed-Methods-Designs, in denen bestehende Längsschnittstudien durch qualitative Befragungsformen ergänzt werden. Innerhalb der reichhaltigen Veröffentlichungen zum Thema Mixed-Methods-Forschung finden sich bisher aber kaum Diskussionen solcher Mixed-Methods-Designs. Im vorliegenden Artikel diskutieren wir Design, Durchführung, sowie Potenzialeund Herausforderungen von Panel-basiert...

  10. Adhesion aspects of polyurethane foam sandwich panels.

    OpenAIRE

    Ng, Simon L.

    2016-01-01

    Sandwich panels, polyurethane foam sandwiched between two sheets of steel, form the walls and roofs in the construction of buildings. ArcelorMittal is a manufacturer of the steel as well as these finished panels. For this project they combined with a supplier of the polyurethane foams, Huntsman Polyurethanes, to joint-fund a research project investigating the fundamental mechanisms of adhesion, as well as the causes of failures in the product which manifests primarily in two different ways...

  11. Lateral resistance of plybamboo wall-panels

    OpenAIRE

    Gonzalez Beltran, G.E.; Herwijnen, van, F.; Janssen, J.J.A.; Moonen, S.P.G.; Gutierrez, J.A.

    2003-01-01

    This paper deals with the experimental and theoretical behavior of plybamboo (kind of plywood made out of bamboo) wall-panels subjected to lateral load. The wall-panels are part of a house design method proposed in the author's PhD thesis for prefabricated social housing in developing countries. Sixteen fullscaled wallpanels with or without window and door openings were tested and their theoretical capacities estimated. Design wind and seismic loads were determined according to the Internatio...

  12. Aerosol Deposition and Solar Panel Performance

    Science.gov (United States)

    Arnott, W. P.; Rollings, A.; Taylor, S. J.; Parks, J.; Barnard, J.; Holmes, H.

    2015-12-01

    Passive and active solar collector farms are often located in relatively dry desert regions where cloudiness impacts are minimized. These farms may be susceptible to reduced performance due to routine or episodic aerosol deposition on collector surfaces. Intense episodes of wind blown dust deposition may negatively impact farm performance, and trigger need to clean collector surfaces. Aerosol deposition rate depends on size, morphology, and local meteorological conditions. We have developed a system for solar panel performance testing under real world conditions. Two identical 0.74 square meter solar panels are deployed, with one kept clean while the other receives various doses of aerosol deposition or other treatments. A variable load is used with automation to record solar panel maximum output power every 10 minutes. A collocated sonic anemometer measures wind at 10 Hz, allowing for both steady and turbulent characterization to establish a link between wind patterns and particle distribution on the cells. Multispectral photoacoustic instruments measure aerosol light scattering and absorption. An MFRSR quantifies incoming solar radiation. Solar panel albedo is measured along with the transmission spectra of particles collected on the panel surface. Key questions are: At what concentration does aerosol deposition become a problem for solar panel performance? What are the meteorological conditions that most strongly favor aerosol deposition, and are these predictable from current models? Is it feasible to use the outflow from an unmanned aerial vehicle hovering over solar panels to adequately clean their surface? Does aerosol deposition from episodes of nearby forest fires impact performance? The outlook of this research is to build a model that describes environmental effects on solar panel performance. Measurements from summer and fall 2015 will be presented along with insights gleaned from them.

  13. Acoustically Tailored Composite Rotorcraft Fuselage Panels

    Science.gov (United States)

    2015-07-02

    3.2.4 Band-Gap/Phononic Crystal Structure-borne Sound Barriers 43 3.2.5 Split Panel Concept for Airborne Sound Transmission Reduction 69 3.3 Final...radiated by the transmission housing also impacts the ceiling panels acoustically, which transmit a portion of that sound into the interior. Composite...3.2.4 Band-Gap/Phononic Crystal Structure-borne Sound Barriers Phononic crystals , or arrays of structural discontinuities, can mitigate structure-borne

  14. Driver-Array Based Flat-Panel Loudspeakers: Theoretical Background and Design Guidelines

    Science.gov (United States)

    Anderson, David Allan

    This thesis relates to the simulation and design of flat-panel loudspeakers using moving-coil driver elements. A brief history of the industry is given, including a collection of products and patents from 1925 until the present, an overview of research papers, and a discussion of current products available. The mechanics of bending flat panels are developed with respect to localized driving forces, both in the frequency domain and the time domain as an impulse response. These simulations are compared to measurements on prototype panels. Additional resonant elements influence the behavior of the system: an optional ported rear enclosure and the resonant characteristics of the drivers. The governing equations for these systems are derived and solutions are implemented using equivalent mechanical circuits and numerical methods. The idea of using driver arrays to independently actuate modes of the panel is discussed at length with respect to modal addressability, modal spillover, and experimental validation. The numerical approach to determining the optimal driver placement for a given set of modes is derived and experimentally validated. An investigation of the acoustic behavior of flat panel loudspeakers is presented, using mechanical simulation results to predict the acoustic radiation. The simulations are compared to measurements and found to accurately predict important mechanical and acoustical behaviors. It is demonstrated that a driver array, with the proper biasing, is capable of creating a flat panel loudspeaker which acts more like a piston than a "diffuse radiator" flat panel loudspeaker. The techniques of "Modal Crossover Networks" are introduced, which use multi-band filters to bias the driver array differently for different frequency bands, optimized for audio reproduction. The question of how many drivers are necessary for a modal crossover network is addressed and found to be dependent on the estimated quality factor (Q) of the panel material and edge

  15. The Improvement of Thermal Insulating Concrete Panel

    Directory of Open Access Journals (Sweden)

    Mohammed Ali Nasser Ali

    2018-05-01

    Full Text Available The Iraqi houses flattening the roof by a concrete panel, and because of the panels on the top directly exposed to the solar radiation become unbearably hot and cold during the summer and winter. The traditional concrete panel components are cement, sand, and aggregate, which have a poor thermal property. The usage of materials with low thermal conductivity with no negative reflects on its mechanical properties gives good improvements to the thermal properties of the concrete panel. The practical part of this work was built on a multi-stage mixing plan. In the first stage the mixing ratio based on the ratios of the sand to cement. The second stage mixing ratios based on replacing the coarse aggregate quantities with the Alabaster aggregates, and the third stage the mixing ratios based on the replacement of wood ash instead of the sand. While the fourth stage mixing ratios based on decreasing the thermal conductivity and increasing mechanical properties by adding a multilayer of a plastic net. The result shows that using a concrete panel with components (cement, sand, coarse aggregate, wood ash, and Alabaster aggregates with a mass ratio of (1:1:2:1:1 and 3-plastic layers, gives the best improvement of the thermal properties. Where, the thermal conductivity is reduced by 42% and the specific heat increased by 41.2% as compared to the traditional concrete panel mixing ratio, with mechanical properties are agreed with the Iraqi standards.

  16. Planarity certification of ATLAS Micromegas detector panels

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Ralph; Biebel, Otmar; Bortfeldt, Jonathan; Flierl, Bernhard; Hertenberger, Ralf; Loesel, Philipp; Herrmann, Maximilian [LMU Muenchen (Germany); Zibell, Andre [JMU Wuerzburg (Germany)

    2016-07-01

    During the second long LHC shutdown, 2019/20, the precision tracking detectors of the ATLAS muon spectrometer in the inner end caps will be replaced using Micromegas, a planar gas-detector technology. Modules of 2 m{sup 2} area are built in quadruplets from five precisely planar sandwich panels that define the anodes and the cathodes of the four active detector planes. A panel is composed of three consecutive layers FR4 - aluminum honeycomb - FR4. Single plane spatial particle resolution below 100 μm is achievable when the deviations from planarity of the strip-anodes do not exceed 80 μm RMS over the whole active area and the parallelism of the readout strips is within 30 μm. In order to measure the dimensional accuracy of each panel, laser distance sensors combined with a coordinate measurement system have been investigated. The sensor requirements to measure the planarity of the panels are a resolution of 0.3 μm and a beam spot diameter of ∼20 μm, well below 100 μ m the size of the smallest structures. We report on achieved planarities of the panels and the performance of the laser sensor system. A panel with an RMS better than 30 μm was build and the evolution of its planarity due to humidity and temperature effects is shown.

  17. Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

    Directory of Open Access Journals (Sweden)

    Hee-Jong Choi

    2011-12-01

    Full Text Available In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 (CB=0.60 hull and KRISO container ship (KCS, a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI. The computational results were validated by comparing with the existing experimental data.

  18. Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

    Science.gov (United States)

    Choi, Hee-Jong; Chun, Ho-Hwan; Park, Il-Ryong; Kim, Jin

    2011-12-01

    In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 (CB=0.60) hull and KRISO container ship (KCS), a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI). The computational results were validated by comparing with the existing experimental data.

  19. PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

    OpenAIRE

    Syafaruddin Ch

    2010-01-01

    The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker...

  20. 2010 ICA Panel on Methodologies for Studying Virtual Worlds

    DEFF Research Database (Denmark)

    Hansbøl, Mikala; Reinhard, CarrieLynn D.; Ho, Caroline

    2010-01-01

    strategies qualitatively from 00:12:00-00:19:30 •CarrieLynn D. Reinhard speaks about merging quantitative and qualitative methods from 00:19:30-00:29:30 •Mikala Hansbøl speaks about qualitative analysis of a serious educational game from 00:29:30-00:40:00 •The question and answer period is from 00:51:15-01:08:00......This video was produced from a panel discussion at the 2010 International Communication Association conference in Singapore. The panelists are Dmitri Williams (University of Southern California), Mikala Hansbøl (Danish School of Education), Caroline Ho (National Institute of Education, Singapore...

  1. Panel: Big Data & Social Media for Empowering Patients with Diabetes.

    Science.gov (United States)

    Fernandez-Luque, Luis; Mejova, Yelena; Mayer, Miguel-Angel; Hasvold, Per Erlend; Joshi, Surabhi

    2016-01-01

    Millions of people living with diabetes are using mobile phones, Internet and social media to socialize with other patients, share experience or search information relevant for their self-management. This phenomena is leading towards a new paradigm of hyper-connected diabetes digital self-management. This is also leading towards an explosion on data, a large amount of data is collected on populations around the world. This panel will address the opportunities this data presents, discuss the latest research that uses it, and the limitations and other concerns.

  2. MO-F-201-01: Panel Member

    International Nuclear Information System (INIS)

    Evans, J.

    2016-01-01

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

  3. MO-F-201-04: Panel Member

    International Nuclear Information System (INIS)

    McNutt, T.

    2016-01-01

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

  4. MO-F-201-01: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Evans, J. [Virginia Commonwealth University (United States)

    2016-06-15

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

  5. MO-F-201-02: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Padilla, L. [Virginia Commonwealth University (United States)

    2016-06-15

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

  6. MO-F-201-03: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    Studenski, M. [University of Miami (United States)

    2016-06-15

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

  7. MO-F-201-04: Panel Member

    Energy Technology Data Exchange (ETDEWEB)

    McNutt, T. [Johns Hopkins University (United States)

    2016-06-15

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

  8. NUFACT11 round table discussion questions and answers

    CERN Document Server

    Blondel, A

    2013-01-01

    This presents the response to questions formulated by a round table discussion panel to the NUFACT11 participants. The main points made were as follows. Neutrino mass is physics beyond the Standard Model, it presents a very deep puzzle to solve, with the answers to several fundamental questions as potential reward. Precision measurement of oscillation parameters is one essential way to access information needed to solve this puzzle and there is a relatively clear (but not easy) way forward. Large θ(13) makes the appearance signals larger, but does not allow to relax the requirements on high beam intensity and large detector masses, it creates a difficult challenge on systematic errors, which will require dedicated ancillary experiments. Of particular interest is a low intensity muon storage ring for required cross-section measurements. There exist already extended bottom-up international collaboration in both physics and R&D experiments. All three main regions have plans for upgraded super-beams and asso...

  9. Sound Transmission Through Multi-Panel Structures Lined with Elastic Porous Materials

    Science.gov (United States)

    Bolton, J. S.; Shiau, N.-M.; Kang, Y. J.

    1996-04-01

    Theory and measurements related to sound transmission through double panels lined with elastic porous media are presented. The information has application to the design of noise control barriers and to the optimization of aircraft fuselage transmission loss, for example. The major difference between the work described here and earlier research in this field relates to the treatment of the porous material that is used to line the cavity between the two panels of the double panel structure. Here we have used the porous material theory proposed by Biot since it takes explicit account of all the wave types known to propagate in elastic porous materials. As a result, it is possible to use the theory presented here to calculate the transmission loss of lined double panels at arbitrary angles of incidence; results calculated over a range of incidence angles may then be combined to yield the random incidence transmission loss. In this paper, the equations governing wave propagation in an elastic porous material are first considered briefly and then the general forms for the stresses and displacements within the porous material are given. Those solutions are expressed in terms of a number of constants that can be determined by application of appropriate boundary conditions. The boundary conditions required to model double panels having linings that are either directly attached to the facing panels or separated?!from them by air gaps are presented and discussed. Measurements of the random incidence transmission loss of aluminium double-panel structures lined with polyurethane foam are presented and have been found to be in good agreement with theoretical predictions. Both the theoretical predictions and the measured results have shown that the method by which an elastic porous lining material is attached to the facing panels can have a profound influence on the transmission loss of the panel system. It has been found, for example, that treatments in which the lining material

  10. Ozone exposure and pulmonary effects in panel and human clinical studies: Considerations for design and interpretation.

    Science.gov (United States)

    Rohr, Annette C

    2018-04-01

    A wealth of literature exists regarding the pulmonary effects of ozone, a photochemical pollutant produced by the reaction of nitrogen oxide and volatile organic precursors in the presence of sunlight. This paper focuses on epidemiological panel studies and human clinical studies of ozone exposure, and discusses issues specific to this pollutant that may influence study design and interpretation as well as other, broader considerations relevant to ozone-health research. The issues are discussed using examples drawn from the wider literature. The recent panel and clinical literature is also reviewed. Health outcomes considered include lung function, symptoms, and pulmonary inflammation. Issues discussed include adversity, reversibility, adaptation, variability in ozone exposure metric used and health outcomes evaluated, co-pollutants in panel studies, influence of temperature in panel studies, and multiple comparisons. Improvements in and standardization of panel study approaches are recommended to facilitate comparisons between studies as well as meta-analyses. Additional clinical studies at or near the current National Ambient Air Quality Standard (NAAQS) of 70 ppb are recommended, as are clinical studies in sensitive subpopulations such as asthmatics. The pulmonary health impacts of ozone exposure have been well documented using both epidemiological and chamber study designs. However, there are a number of specific methodological and related issues that should be considered when interpreting the results of these studies and planning additional research, including the standardization of exposure and health metrics to facilitate comparisons among studies.

  11. 21 CFR 516.141 - Qualified expert panels.

    Science.gov (United States)

    2010-04-01

    ... choose members for the qualified expert panel in accordance with selection criteria listed in paragraph... whether the proposed qualified expert panel meets the selection criteria prior to the panel beginning its... Committee Act, as amended, 5 U.S.C. App. (b) Criteria for the selection of a qualified expert panel. (1) A...

  12. 45 CFR 1801.22 - Interview of Finalists with panel.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Interview of Finalists with panel. 1801.22 Section... FOUNDATION HARRY S. TRUMAN SCHOLARSHIP PROGRAM The Competition § 1801.22 Interview of Finalists with panel. The Foundation invites each Finalist to an interview with a regional review panel. Panels evaluate...

  13. Different Modelling Approaches to Coupling Wall and Floor Panels within a Dynamic Finite Element Model of a Lightweight Building

    DEFF Research Database (Denmark)

    Kiel, Nikolaj; Andersen, Lars Vabbersgaard; Niu, Bin

    2012-01-01

    . With the number of modules in the three axial directions defined, wall and floor panels are constructed, placed and coupled in the global model. The core of this modular finite element model consists of connecting the different panels to each other in a rational manner, where the accuracy is as high as possible......, with as many applications as possible, for the least possible computational cost. The coupling method of the structural panels in the above mentioned modular finite element model is in this paper discussed and evaluated. The coupling of the panels are performed using the commercial finite element program....... In this way a well-defined master geometry is present onto which all panels can be tied. But as the skeleton is an element itself, it will have a physical mass and a corresponding stiffness to be included in the linear system of equations. This means that the skeleton will influence the structure...

  14. Vacuum Insulation Panels - Study on VIP-components and panels for service life prediction of VIP in building applications (Subtask A)

    Energy Technology Data Exchange (ETDEWEB)

    Simmler, H.; Brunner, S. [Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland); Heinemann, U.; Schwab, H. [Bavarian Centre for Applied Energy Research (ZAE Bayern), Garching (Germany); Kumaran, K.; Mukhopadhyaya, P. [National Research Council, Institute for Research in Construction (NRC-IRC), Ottawa (Canada); Quenard, D.; Sallee, H. [Scientific and Technical Centre for Construction (CSTB), Marne la Vallee (France); Noller, K.; Kuecuekpinar-Niarchos, E.; Stramm, C. [Fraunhofer Institute for Process Engineering and Packaging (IVV), Freising (Germany); Tenpierik, M.; Cauberg, H. [Technical University of Delft, Delft (Netherlands); Erb, M. [Dr. Eicher und Pauli AG (Switzerland)

    2005-09-15

    This comprehensive paper takes a look at the properties of vacuum insulation panels (VIP) and was presented as a contribution to the IEA's ECBCS (Energy Conservation in Buildings and Community Systems) Annex 39. The various institutions in Switzerland, Germany, Canada, France, Sweden and the Netherlands participating in the task and their activities are listed. The paper describes the concept of vacuum insulation for buildings and examines the physics involved and core materials that can be used. The physical, mechanical and thermal properties of the core materials are examined and the requirements placed on the envelope of the panels are looked at. Tests made on materials as well as on the complete vacuum insulation panels are described in detail. The results obtained are presented and reviewed. Service-life and quality assurance aspects are also discussed. A comprehensive appendix completes the report.

  15. Data quality in probability-based online panels: Nonresponse, attrition, and panel conditioning

    NARCIS (Netherlands)

    Struminskaya, B.; Methodology and statistics for the behavioural and social sciences

    2014-01-01

    Online panels – surveys administered over the Internet in which persons are asked to complete surveys regularly – offer cost reductions compared to surveys that use more traditional modes of data collection (face-to-face, telephone, and mail). However, some characteristics of online panels may cause

  16. Performance comparison between silicon solar panel and dye-sensitized solar panel in Malaysia

    Science.gov (United States)

    Hamed, N. K. A.; Ahmad, M. K.; Urus, N. S. T.; Mohamad, F.; Nafarizal, N.; Ahmad, N.; Soon, C. F.; Ameruddin, A. S.; Faridah, A. B.; Shimomura, M.; Murakami, K.

    2017-09-01

    In carrying out experimental research in performance between silicon solar panel and dye-sensitive solar panel, we have been developing a device and a system. This system has been developed consisting of controllers, hardware and software. This system is capable to get most of the input sources. If only need to change the main circuit and coding for a different source input value. This device is able to get the ambient temperature, surface temperature, surrounding humidity, voltage with load, current with load, voltage without load and current without load and save the data into external memory. This device is able to withstand the heat and rain as it was fabricated in a waterproof box. This experiment was conducted to examine the performance of both the solar panels which are capable to maintain their stability and performance. A conclusion based on data populated, the distribution of data for dye-sensitized solar panel is much better than silicon solar panel as dye-sensitized solar panel is very sensitive to heat and not depend only on midday where is that is the maximum ambient temperature for both solar panel as silicon solar panel only can give maximum and high output only when midday.

  17. System reliability evaluation of a touch panel manufacturing system with defect rate and reworking

    International Nuclear Information System (INIS)

    Lin, Yi-Kuei; Huang, Cheng-Fu; Chang, Ping-Chen

    2013-01-01

    In recent years, portable consumer electronic products, such as cell phone, GPS, digital camera, tablet PC, and notebook are using touch panel as interface. With the demand of touch panel increases, performance assessment is essential for touch panel production. This paper develops a method to evaluate system reliability of a touch panel manufacturing system (TPMS) with defect rate of each workstation and takes reworking actions into account. The system reliability which evaluates the possibility of demand satisfaction can provide to managers with an understanding of the system capability and can indicate possible improvements. First, we construct a capacitated manufacturing network (CMN) for a TPMS. Second, a decomposition technique is developed to determine the input flow of each workstation based on the CMN. Finally, we generate the minimal capacity vectors that should be provided to satisfy the demand. The system reliability is subsequently evaluated in terms of the minimal capacity vectors. A further decision making issue is discussed to decide a reliable production strategy. -- Graphical abstract: The proposed procedure to evaluate system reliability of the touch panel manufacturing system (TPMS). Highlights: • The system reliability of a touch panel manufacturing system (TPMS) is evaluated. • The reworking actions are taken into account in the TPMS. • A capacitated manufacturing network is constructed for the TPMS. • A procedure is proposed to evaluate system reliability of TPMS

  18. BEHAVIOUR OF UNREINFORCED EXPANDED POLYSTYRENE LIGHTWEIGHT CONCRETE (EPS-LWC WALL PANEL ENHANCED WITH STEEL FIBRE

    Directory of Open Access Journals (Sweden)

    ROHANA MAMAT

    2015-12-01

    Full Text Available This study used steel fibre as reinforcement while enhancing the EPS-LWC strength. In line with architectural demand and ventilation requirement, opening within wall panel was also taken into account. Experimental tests were conducted for reinforced and unreinforced EPS-LWC wall panel. Two samples with size of 1500 mm (height x 1000 mm (length x 75 mm (thickness for each group of wall panel were prepared. Samples in each group had opening size of 600 mm (height x 400 mm (length located at 350 mm and 550 mm from upper end respectively. EPS-LWC wall panel had fcu of 20.87 N/mm2 and a density of 1900 kg/m3. The loading capacity, displacement profiles and crack pattern of each sample was analyzed and discussed. Unreinforced EPS-LWC enhanced with steel fibre resist almost similar loading as reinforced EPS-LWC wall panel. The presence of steel fibre as the only reinforcement creates higher lateral displacement. Wall panel experience shear failure at the side of opening. The number of micro cracks reduces significantly due to presence of steel fibre.

  19. Application of water flowing PVC pipe and EPS foam bead as insulation for wall panel

    Science.gov (United States)

    Ali, Umi Nadiah; Nor, Norazman Mohamad; Yusuf, Mohammed Alias; Othman, Maidiana; Yahya, Muhamad Azani

    2018-02-01

    Malaysia located in tropical climate which have a typical temperature range between 21 °C to 36 °C. Due to this, air-conditioning system for buildings become a necessity to provide comfort to occupants. In order to reduce the energy consumption of the air-conditioning system, the transmission of heat from outdoor to indoor space should be kept as minimum as possible. This article discuss about a technology to resist heat transfer through concrete wall panel using a hybrid method. In this research, PVC pipe was embedded at the center of concrete wall panel while the EPS foam beads were added about 1% of the cement content in the concrete mix forming the outer layer of the wall panel. Water is regulated in the PVC pipe from the rainwater harvesting system. The aim of this study is to minimize heat transfer from the external environment into the building. Internal building temperature which indicated in BS EN ISO 7730 or ASHRAE Standard 55 where the comfort indoor thermal is below 25°C during the daytime. Study observed that the internal surface temperature of heat resistance wall panel is up to 3°C lower than control wall panel. Therefore, we can conclude that application of heat resistance wall panel can lead to lower interior building temperature.

  20. Automatic outdoor monitoring system for photovoltaic panels.

    Science.gov (United States)

    Stefancich, Marco; Simpson, Lin; Chiesa, Matteo

    2016-05-01

    Long-term acquisition of solar panel performance parameters, for panels operated at maximum power point in their real environment, is of critical importance in the photovoltaic research sector. However, few options exist for the characterization of non-standard panels such as concentrated photovoltaic systems, heavily soiled or shaded panels or those operating under non-standard spectral illumination; certainly, it is difficult to find such a measurement system that is flexible and affordable enough to be adopted by the smaller research institutes or universities. We present here an instrument aiming to fill this gap, autonomously tracking and maintaining any solar panel at maximum power point while continuously monitoring its operational parameters and dissipating the produced energy without connection to the power grid. The instrument allows periodic acquisition of current-voltage curves to verify the employed maximum power point tracking approach. At the same time, with hardware schematics and software code being provided, it provides a flexible open development environment for the monitoring of non-standard generators like concentrator photovoltaic systems and to test novel power tracking approaches. The key issues, and the corresponding solutions, encountered in the design are analyzed in detail and the relevant schematics presented.