WorldWideScience

Sample records for na interface metal-solucao

  1. Microstructural analysis of metal solution interfacial films in the multiphase brine CO{sub 2}, H{sub 2}S hydrocarbon inhibitor system; Analise microestrutural de filmes na interface metal-solucao no sistema multifasico salmoura Co{sub 2}/H{sub 2}S hidrocarboneto inibidor

    Energy Technology Data Exchange (ETDEWEB)

    Forero, Adriana; Yesid Pena, Dario [Universidad Industrial de Santander, Bucaramanga (Colombia); Bott, Ivani de S. [Pontificia Univ. Catolica do Rio de Janeiro, RJ (Brazil). Dept. de Ciencia dos Materiais e Metalurgia

    2005-07-01

    This work presents an analysis of the formation of different films obtained at the metal - solution interface in a multiphase Brine - CO{sub /}H{sub 2}S Hydrocarbon - Inhibitor - Steel AISI SAE 1020 system. Tests were carried out on loss of mass test pieces in a static autoclave, for exposure times of 21 days. Infrared Absorption Spectroscopy (IAS), X Ray Diffraction (XRD) and Scanning Electronic Microscopy (SEM) techniques, were used for the analysis of the products of corrosion and the inhibitor films formed. The results obtained for XRD indicate the formation hydrous oxide of iron, Siderite, Magnetite, and in some cases chloride crystals and iron sulphates. The results obtained by SEM, show that the thin films of the inhibitor and corrosion products have irregular surfaces, are porous, fragile and have little adhesion to the metal. Additionally the generation of primary films of carbonate of iron saturated with carbon and oxide of iron was confirmed and also the formation of secondary carbonates of iron due to recrystallization of the of iron carbonate. (author)

  2. Determination of limiting stage of interface hydrogen isotopic exchange on NaX-3M zeolite

    International Nuclear Information System (INIS)

    Polevoj, A.S.; Yudin, I.P.

    1987-01-01

    The dependence of transfer unit height, when separating the mixture H 2 -D 2 using NaX-3M zeolite, on the value of gas consumption and sorbent grain size in a countercurrent column is determined. Hydrogen diffusion in sorbent secondary pores is shown to be the limiting stage of interface hydrogen isotopic exchange on NaX-3M zeolite

  3. Discontinuously branching tree morphology induced at the NaCl/AgCo interface by ion irradiation

    International Nuclear Information System (INIS)

    Shang, C.H.; Li, H.D.; Liu, B.X.; Center of Condensed Matter and Radiation Physics, Beijing, China; Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China)

    1989-01-01

    We present a new class of fractal structure, discontinuously branching tree morphology (DBTM), developed at the NaCl/AgCo interface by ion irradiation. This kind of morphology is distinct from all the previous observed fractal patterns and cannot be explained by the diffusion-limited aggregation model. The observed DBTM's with fractal dimension of 1.56 have been proved to share many common features with latticie animals. Besides, many important aspects concerning pattern formation are also characterized in detail

  4. From Experiments to Simulations: Downscaling Measurements of Na+ Distribution at the Root-Soil Interface

    Science.gov (United States)

    Perelman, A.; Guerra, H. J.; Pohlmeier, A. J.; Vanderborght, J.; Lazarovitch, N.

    2017-12-01

    When salinity increases beyond a certain threshold, crop yield will decrease at a fixed rate, according to the Maas and Hoffman model (1976). Thus, it is highly important to predict salinization and its impact on crops. Current models do not consider the impact of the transpiration rate on plant salt tolerance, although it affects plant water uptake and thus salt accumulation around the roots, consequently influencing the plant's sensitivity to salinity. Better model parametrization can improve the prediction of real salinity effects on crop growth and yield. The aim of this research is to study Na+ distribution around roots at different scales using different non-invasive methods, and to examine how this distribution is affected by the transpiration rate and plant water uptake. Results from tomato plants that were grown on rhizoslides (a capillary paper growth system) showed that the Na+ concentration was higher at the root-substrate interface than in the bulk. Also, Na+ accumulation around the roots decreased under a low transpiration rate, supporting our hypothesis. The rhizoslides enabled the root growth rate and architecture to be studied under different salinity levels. The root system architecture was retrieved from photos taken during the experiment, enabling us to incorporate real root systems into a simulation. Magnetic resonance imaging (MRI) was used to observe correlations between root system architectures and Na+ distribution. The MRI provided fine resolution of the Na+ accumulation around a single root without disturbing the root system. With time, Na+ accumulated only where roots were found in the soil and later around specific roots. Rhizoslides allow the root systems of larger plants to be investigated, but this method is limited by the medium (paper) and the dimension (2D). The MRI can create a 3D image of Na+ accumulation in soil on a microscopic scale. These data are being used for model calibration, which is expected to enable the prediction

  5. FORMAÇÃO CONTINUADA NA EDUCAÇÃO INFANTIL: INTERFACES COM O BRINCAR

    Directory of Open Access Journals (Sweden)

    Leticia Cavassana Soares

    2016-03-01

    Full Text Available Considerando a formação continuada em articulação com o trabalho educativo na Educação Infantil, pautado no eixo das interações e brincadeiras, neste texto apresentamos estudo bibliográfico que analisou produções acadêmicas sobre as temáticas da formação continuada e do brincar, situadas na primeira etapa da educação básica. Sustentados nos pressupostos teórico-metodológicos bakhtinianos, buscamos compreender como se configuram as pesquisas que associam a tríade referente à formação continuada, ao brincar e à Educação Infantil, selecionando trabalhos no Banco de Teses e Dissertações da CAPES, nos Grupos de trabalho 07 e 08 da ANPEd e no banco da SciELO. As análises do corpus de dados acenam para a necessidade de investimentos em ações de formação continuada que tematizem o brincar na interface com o trabalho educativo com as crianças, com a finalidade de culminar em práticas pedagógicas pautadas na brincadeira.

  6. A naïve and fast human computer interface controllable for the inexperienced - a performance study.

    Science.gov (United States)

    Krueger, Thilo B; Stieglitz, Thomas

    2007-01-01

    We present a Human Computer Interface (HCI) which can be prepared in less than five minutes and reaches a high accuracy with naïve users. With additional learning the success rate increases drastically. Using the EOG for control of a cursor we show how the interface between man and machine can be established quickly. Off the shelf hardware components were used for the setup, including an already approved amplifier for human use. The graphical user interface with optical and acoustical feedback consisted of self developed software. With the proposed interface we reached a maximum bit rate of 57.7 bit/min with untrained users.

  7. Cluster formation at the Si/liquid interface in Sr and Na modified Al–Si alloys

    International Nuclear Information System (INIS)

    Barrirero, Jenifer; Li, Jiehua; Engstler, Michael; Ghafoor, Naureen; Schumacher, Peter; Odén, Magnus; Mücklich, Frank

    2016-01-01

    Atom probe tomography was used to compare Na and Sr modified Al–Si hypoeutectic alloys. Both Na and Sr promote the formation of nanometre-sized clusters in the Si eutectic phase. Compositional analyses of the clusters show an Al:Sr ratio of 2.92 ± 0.46 and an Al:Na ratio of 1.07 ± 0.23. It is proposed that SrAl 2 Si 2 and NaAlSi clusters are formed at the Si/liquid interface and take part in the modification process by altering the eutectic Si growth.

  8. Base de dados INDEX PSI: recurso informacional na área de psicologia utilizando interface WWWIsis

    Directory of Open Access Journals (Sweden)

    Rosa Maria Vivona B. de Oliveira

    2000-01-01

    Full Text Available A Base de Dados Bibliográfica INDEX PSI (http://www.psicologia-online.org.br/index.html surgiu de um convênio firmado entre o Sistema de Bibliotecas e Informação da PUC-Campinas e o Conselho Federal de Psicologia, objetivando a organização da produção científica nacional na área de Psicologia, focalizando artigos de periódicos publicados no período de 1980 a 1999 com a finalidade de disseminação da informação gerada e preservação da memória científica. Utilizou-se, para entrada de dados, o software CDS-Microisis, versão 3.07 para DOS e interface WWWIsis para acesso via WEB. A Base INDEX PSI será objeto de construção de Biblioteca Virtual na área de Psicologia. The bibliographic database INDEX PSI was established through an agreement between the Information and Library System of PUC-Campinas and the Brazilian Federal Psychology Council, aiming at the organization of the national scientific production in the Psychology field. It focuses on serial articles published from 1980 to 1999, in order to disseminate the information produced and to preserve the scientific memory. To input data at this database it was used the software CDS-Microisis DOS version 3.07, and the interface WWWIsis to access through WEB. INDEX PSI as intended to be the beginning of a Psychology Virtual Library.

  9. Interfaces da Comunicação: influências do cinema na telenovela Avenida Brasil

    Directory of Open Access Journals (Sweden)

    Rafael Jose Bona

    2014-07-01

    Full Text Available O artigo analisa as influências do cinema em cenas do último capítulo da telenovela Avenida Brasil (2012, exibida pela Rede Globo de Televisão. Este produto midiático ficou conhecido por suas inovações na forma de produção de telenovelas no país. Para contextualizar a questão de interfaces da comunicação foram utilizados os autores: Maria Immacolata Lopes (2009, José Luiz Braga (2011 e Muniz Sodré (2012. A análise deu-se a partir de José Roberto Sadek (2008 e Renato Pucci Júnior (2013. Os resultados alcançados apontam contribuições das interfaces comunicacionais no fortalecimento da produção de telenovelas brasileiras e o alcance de novo público pertencente à era das convergências midiáticas. 

  10. High charge carrier density at the NaTaO3/SrTiO3 hetero-interface

    KAUST Repository

    Nazir, Safdar

    2011-08-05

    The formation of a (quasi) two-dimensional electron gas between the band insulators NaTaO3 and SrTiO3 is studied by means of the full-potential linearized augmented plane-wave method of density functional theory. Optimization of the atomic positions points to only small changes in the chemical bonding at the interface. Both the p-type (NaO)−/(TiO2)0 and n-type (TaO2)+/(SrO)0 interfaces are found to be metallic with high charge carrier densities. The effects of O vacancies are discussed. Spin-polarized calculations point to the formation of isolated O 2pmagnetic moments, located in the metallic region of the p-type interface.

  11. O estado do corpo imigrante e o corpo do Estado: negociações na interface

    Directory of Open Access Journals (Sweden)

    Elizabeth P. Challinor

    2014-03-01

    Full Text Available Por meio de uma análise etnográfica das interfaces sociais entre agentes do Estado e estudantes cabo-verdianos em Portugal, observadas através da observação participante em consultas médicas, em trabalho social, no Serviço de Estrangeiros e Fronteiras e no serviço jurídico de apoio ao imigrante, este artigo pretende examinar as práticas disciplinares do Estado e as negociações e lutas de poder que ocorrem. Os casos etnográficos discutidos demonstram como a ideia de um Estado neutro e justo que trata todos os cidadãos em pé de igualdade é simultaneamente reproduzida e negada na prática, elucidando como o Estado constitui um símbolo de união de uma efetiva desunião. Os exemplos etnográficos também apontam para outras dimensões da prática do Estado, além dos micropoderes disciplinares, onde se cria espaço para flexibilidade e adaptação. E é nesse sentido que etnografias das interfaces entre Estado e cidadão servem para relativizar interpretações excessivamente sistemáticas da governamentalidade, ilustrando como os efeitos das práticas contraditórias do Estado são tão imprevisíveis como a ação humana.

  12. Direct Probing into the Electrochemical Interface Using a Novel Potential Probe: Au(111) Electrode/NaBF4 Solution Interface

    International Nuclear Information System (INIS)

    Woo, Dae Ha; Yoo, Jung Suk; Park, Su Moon; Jeon, Il C.; Kang, Heon

    2004-01-01

    We have demonstrated that the miniaturized potential probe can measure the local potential of the solution and the electrochemical interface with subnanometer spatial resolution. The present result is the first measurement of the interface potential made in real space. The result would stimulate both experimentalists and theorists to further develop new tools for similar measurements as well as relevant theories for a better understanding of the electrified interfaces. In a narrow region of an electrode/electrolyte interface, an electrical double layer (EDL) exists in which ions with an opposite charge to the electrode line up in an excess concentration. The EDL is believed to be extremely thin, and the internal electric field strength can exceed 10 7 V/m in routine electrochemical environments. Since its presence was first predicted by theory in the early 20th century, understanding of the EDL has been a key to the subjects of practical and fundamental importance such as electrochemistry, corrosion, and the stability of colloidal particles

  13. Um modelo de cores na usabilidade das interfaces computacionais para os deficientes de baixa visão

    Directory of Open Access Journals (Sweden)

    Cínthia Costa Kulpa

    2010-09-01

    Full Text Available Este artigo apresenta os resultados de uma pesquisa realizada sobre a usabilidade das interfaces computacionais através das cores, tendo o deficiente de Baixa Visão como usuário. Para um melhor entendimento, são abordados os fundamentos teóricos sobre a interação humano-computador, usabilidade, cores e deficientes de baixa visão. Após a fundamentação teórica, é descrita a metodologia utilizada, o teste de usabilidade de 3 interfaces web realizado com os usuários em questão, demonstrando os resultados para o desenvolvimento de um protótipo de interface tendo as cores como elemento principal. O protótipo desenvolvido é apresentado juntamente com o teste de usabilidade realizado com este. Como resultado do trabalho realizado, são apresentadas recomendações e também é proposto um modelo de cores que atenda aos usuários de baixa visão, na construção e readequação de interfaces computacionais, visando à usabilidade das interfaces na web.

  14. Na,K-ATPase activity and epithelial interfaces in gills of the freshwater shrimp Macrobrachium amazonicum (Decapoda, Palaemonidae).

    Science.gov (United States)

    Belli, N M; Faleiros, R O; Firmino, K C S; Masui, D C; Leone, F A; McNamara, J C; Furriel, R P M

    2009-03-01

    Diadromous freshwater shrimps are exposed to brackish water both as an obligatory part of their larval life cycle and during adult reproductive migration; their well-developed osmoregulatory ability is crucial to survival in such habitats. This study examines gill microsomal Na,K-ATPase (K-phosphatase activity) kinetics and protein profiles in the freshwater shrimp Macrobrachium amazonicum when in fresh water and after 10-days of acclimation to brackish water (21 per thousand salinity), as well as potential routes of Na+ uptake across the gill epithelium in fresh water. On acclimation, K-phosphatase activity decreases 2.5-fold, Na,K-ATPase alpha-subunit expression declines, total protein expression pattern is markedly altered, and enzyme activity becomes redistributed into different density membrane fractions, possibly reflecting altered vesicle trafficking between the plasma membrane and intracellular compartments. Ultrastructural analysis reveals an intimately coupled pillar cell-septal cell architecture and shows that the cell membrane interfaces between the external medium and the hemolymph are greatly augmented by apical pillar cell evaginations and septal cell invaginations, respectively. These findings are discussed regarding the putative movement of Na+ across the pillar cell interfaces and into the hemolymph via the septal cells, powered by the Na,K-ATPase located in their invaginations.

  15. Falsa interface como recurso poético na obra interativa

    Directory of Open Access Journals (Sweden)

    Milton Terumitsu Sogabe

    Full Text Available Resumo O conceito de "falsa interface" nasce da observação e produção de instalações interativas mediadas pela tecnologia digital. A "falsa interface" não é uma interface tecnológica que permite ao público a interação com um sistema digital, mas é um recurso poético, geralmente um aparato ou objeto artesanal com o qual o público interage com a obra de arte, que é um sistema. A "falsa interface" apresenta uma relação física, uma conexão com uma interface tecnológica. O público se relaciona ludicamente com a falsa interface e a interface tecnológica passa despercebida, em segundo plano, embora seja ela que capte e envie para o sistema a atuação do público.

  16. A Interface e as suas dimensões na perceção de credibilidade e confiança na e-Health. Proposta de uma estrutura para análise da Interface

    Directory of Open Access Journals (Sweden)

    Andreia Pinto de Sousa

    2015-07-01

    Full Text Available A Interface é incontornável quando se estudam os sistemas de informação. Com este artigo, pretendemos contribuir para o aumento do conhecimento sobre os processos de apresentação de informação de saúde online e, sobre as relações do utilizador com a Interface. A proposta aqui apresentada consiste na divisão da interface em cinco dimensões (visual, arquitetura da informação, interação, presença social e experiência de utilização para um maior conhecimento da relevância de cada uma das dimensões e dos seus elementos no estudo da credibilidade e confiança online. Apresenta-se também um modelo de análise que serve como base de construção dos instrumentos de análise para a recolha de dados que caraterizam os utilizadores, e os seus comportamentos relativamente ao acesso e participação e avaliam a sua perceção de credibilidade e de confiança em websites partindo da análise de cada uma das dimensões da Interface.

  17. Resposta da assembleia de formigas na interface solo-serapilheira a um gradiente de alteração ambiental

    Directory of Open Access Journals (Sweden)

    Diego S. Gomes

    2013-06-01

    Full Text Available O estudo objetivou avaliar a resposta da assembleia de formigas que nidificam na interface solo-serapilheira a um gradiente de alteração ambiental. O estudo foi realizado em três ambientes com diferentes usos do solo: fragmento florestal, sistema agroflorestal (SAF e pastagem situados em região de domínio da mata atlântica no sudeste do Brasil. Em cada ambiente foram demarcadas 10 parcelas de 1 m² e todos os ninhos de formigas encontrados foram registrados. Foram encontrados 215 ninhos (103 no fragmento florestal, 64 no sistema agroflorestal e 48 na pastagem, de 31 espécies. O número acumulado de espécies foi maior no fragmento florestal que na pastagem, mas não diferiu do SAF. A composição de espécies foi diferente entre o fragmento florestal e os outros dois ambientes. A riqueza média de espécies de formigas por parcela foi maior no fragmento florestal e menor na pastagem. A quantidade de serapilheira não foi um fator importante para as diferenças na riqueza de espécies. Atividades humanas que reduzam a heterogeneidade da vegetação alteram a composição e diminuem a riqueza de espécies das assembleias de formigas.

  18. A INFLUÊNCIA DAS CORES NA USABILIDADE DE INTERFACES ATRAVÉS DO DESIGN CENTRADO NO COMPORTAMENTO CULTURAL DO USUÁRIO

    Directory of Open Access Journals (Sweden)

    Cínthia Costa Kulpa

    2011-10-01

    Full Text Available Este artigo busca uma relação entre a influência das cores na usabilidade de interfaces através do design centrado no comportamento cultural do usuário. Para isto, se fez referência na bibliografia de design centrado no usuário, suas relações com as interfaces, interação humano-computador, definições de usabilidade e principalmente definições e características das cores. Foi necessário pesquisar informações sobre o comportamento cultural do usuário e como se relacionam estes aspectos culturais com as cores nas interfaces evidenciando estas relações na usabilidade de uma interface.

  19. O Movimento dos Pequenos Agricultores na interface entre agricultura familiar e educação do campo

    Directory of Open Access Journals (Sweden)

    Ramofly Bicalho Santos

    2017-04-01

    Full Text Available O artigo em questão é fruto das pesquisas desenvolvidas pelo Programa de Educação Tutorial – PET Educação do Campo e Movimentos Sociais na UFRRJ – Universidade Federal Rural do Rio de Janeiro. Ele aborda o protagonismo do MPA – Movimento dos Pequenos Agricultores, na interface entre agricultura familiar e educação do campo. Trabalhamos com o plano camponês, uma das principais armas do MPA. Ele representa um contraponto à incapacidade estatal na criação de leis que apoiem os pequenos agricultores. Desenvolvemos uma pesquisa bibliográfica e documental, utilizando as seguintes fontes de investigação: legislações, portarias, decretos e referenciais sobre educação do campo no Brasil. Utilizamos ainda os dados do censo agropecuário de 2006, ressaltando o valor da agricultura familiar na mesa do brasileiro. Nesse contexto, verificamos que o processo de ensino e aprendizagem deve dialogar com a realidade concreta dos sujeitos, individuais e coletivos, articulados com a luta pela terra. Concluímos que a produção coletiva do saber em parceria com educandos/as, educadores/as, comunidades e os movimentos sociais de luta pela terra, pode dialogar com histórias, memórias, identidades, desejos, valores e reconhecimento, fortalecendo o debate em torno da educação do campo, na sua estreita relação com movimentos sociais, escolas do campo e universidades públicas.

  20. O ambiente virtual como interface na reabilitação pós-AVE: relato de caso

    Directory of Open Access Journals (Sweden)

    Silvia Leticia Pavão

    Full Text Available INTRODUÇÃO: O acidente vascular encefálico (AVE é um quadro neurológico agudo de repercussões amplas, que exige de suas vítimas programas de reabilitação desafiadores na promoção da função. Nesse contexto, a Realidade Virtual (RV é uma ferramenta de interface na reabilitação que pode gerar altos índices de motivação do paciente e permitir adaptação da terapia ao seu nível de função. OBJETIVO: Verificar o efeito da RV por meio de videogame sobre o controle postural de um indivíduo pós-AVE. MATERIAIS E MÉTODOS: Um indivíduo pós-AVE com um ano de lesão foi submetido a um protocolo de reabilitação física com videogame numa frequência de três vezes por semana por um período de 12 semanas. Anteriormente e após o programa foi realizada dinamometria por plataforma de força para análise de variáveis relacionadas ao centro de pressão (COP. RESULTADOS: Na reavaliação, observou-se que a amplitude de deslocamento médio-lateral (x aumentou 67% na condição de olhos abertos (OA e fechados (OF; amplitude anteroposterior (y aumentou 25 e 44% em OA e OF, respectivamente; área aumentou 109 e 141% em OA e OF; velocidade diminuiu 26 e 0,27% em OA e OF. CONCLUSÃO: A RV como interface na reabilitação possivelmente ampliou a exploração da base de suporte para manutenção da estabilidade, constituindo recurso adicional no tratamento desses indivíduos.

  1. Aborto induzido na interface da saúde e do direito

    Directory of Open Access Journals (Sweden)

    Iria Raquel Borges Wiese

    2014-06-01

    Full Text Available Objetivou-se investigar as crenças dos profissionais de saúde e de direito sobre o aborto induzido, por meio da pesquisa qualitativa. Para tanto, foram entrevistados 15 profissionais de saúde (médicos ginecologistas/obstetras, enfermeiros e psicólogos e 10 profissionais de direito (promotores de justiça e juízes de direito. As entrevistas foram operacionalizadas com base em categorias determinadas a partir dos sentidos suscitados, processados em uma série de etapas. Dessa forma, os discursos dos participantes foram agrupados em duas categorias: atitude e aspectos jurídicos. A categoria atitude foi composta por crenças contrárias e favoráveis a essa prática, que se centraram na heteronomia e sacralidade da vida. As crenças favoráveis, por sua vez, estiveram ancoradas na perspectiva dos direitos reprodutivos e sexuais, na redução de riscos e danos e na autonomia da mulher sobre seu próprio corpo. Em relação aos aspectos jurídicos, verificou-se que os profissionais de direito apresentaram um posicionamento mais rígido quanto à punição das mulheres que abortam. Embora se tenha uma legislação sobre o assunto e normas técnicas de atenção humanizada ao aborto, as discussões não se encerram no ponto de vista jurídico ou deontológico; ao contrário, abrangem um leque variado de crenças, as quais podem guiar a atuação dos profissionais, tanto no cuidado à saúde da mulher como na interpretação dos seus direitos.

  2. O direito à saúde na interface entre sociedade civil e Estado

    OpenAIRE

    Machado,Felipe Rangel de Souza

    2009-01-01

    O objetivo deste artigo é discutir sobre o desenvolvimento do direito à saúde no Brasil. Parte-se do processo de construção dos direitos sociais, passando pela assunção destes direitos na Carta Magna Brasileira até chegar às compreensões atuais de certos segmentos sociais sobre o direito à saúde. A análise baseia-se na pesquisa realizada em Porto Alegre, Rio Grande do Sul, a respeito da atuação conjunta entre conselhos de saúde e Ministério Público. Pode-se observar que o direito à saúde tem ...

  3. As interfaces da avaliação na educação infantil

    Directory of Open Access Journals (Sweden)

    Joselma Salazar de Castro

    2017-12-01

    Full Text Available O presente artigo debate sobre a temática da avaliação na Educação Infantil e as implicações que esse processo traz ao direito das crianças em viver suas infâncias. Apresentamos a concepção de Educação Infantil, infância e criança, na qual nos aportamos, assim como, um breve histórico do processo de avaliação na Educação Infantil, no momento em que esta, torna-se primeira etapa da Educação Básica. Discutiremos a avaliação como processo inerente à educação das crianças e que, dado a conjuntura política atual, tal processo pode implicar negativamente no direito das crianças viverem a infância ao terem precocizados os processos de aprendizagem pela lógica da escolarização. Desta forma, apresentamos a avaliação de contexto, atualmente estudada por especialistas da área, como um contraponto a avaliações externas e em larga escala.

  4. Molecular dynamics simulations of nonpolarizable inorganic salt solution interfaces: NaCl, NaBr, and NaI in transferable intermolecular potential 4-point with charge dependent polarizability (TIP4P-QDP) water

    Science.gov (United States)

    Bauer, Brad A.; Patel, Sandeep

    2010-01-01

    We present molecular dynamics simulations of the liquid-vapor interface of 1M salt solutions of nonpolarizable NaCl, NaBr, and NaI in polarizable transferable intermolecular potential 4-point with charge dependent polarizability water [B. A. Bauer et al., J. Chem. Theory Comput. 5, 359 (2009)]; this water model accommodates increased solvent polarizability (relative to the condensed phase) in the interfacial and vapor regions. We employ fixed-charge ion models developed in conjunction with the TIP4P-QDP water model to reproduce ab initio ion-water binding energies and ion-water distances for isolated ion-water pairs. The transferability of these ion models to the condensed phase was validated with hydration free energies computed using thermodynamic integration (TI) and appropriate energy corrections. Density profiles of Cl-, Br-, and I- exhibit charge layering in the interfacial region; anions and cation interfacial probabilities show marked localization, with the anions penetrating further toward the vapor than the cations. Importantly, in none of the cases studied do anions favor the outermost regions of the interface; there is always an aqueous region between the anions and vapor phase. Observed interfacial charge layering is independent of the strength of anion-cation interactions as manifest in anion-cation contact ion pair peaks and solvent separated ion pair peaks; by artificially modulating the strength of anion-cation interactions (independent of their interactions with solvent), we find little dependence on charge layering particularly for the larger iodide anion. The present results reiterate the widely held view of the importance of solvent and ion polarizability in mediating specific anion surface segregation effects. Moreover, due to the higher parametrized polarizability of the TIP4P-QDP condensed phase {1.31 Å3 for TIP4P-QDP versus 1.1 Å3 (TIP4P-FQ) and 0.87 Å3 (POL3) [Ponder and Case, Adv. Protein Chem. 66, 27 (2003)]} based on ab initio

  5. Interface role in the enhanced photocatalytic activity of TiO2-Na0.9Mg0.45Ti3.55O8 nanoheterojunction

    Directory of Open Access Journals (Sweden)

    Ze-Qing Guo

    2017-02-01

    Full Text Available TiO2-Na0.9Mg0.45Ti3.55O8 (TiO2-NMTO nanocomposites were synthesized via a simple hydrothermal method. TiO2 nanoparticles were loaded on NMTO nanosheets with well matched lattices. The TiO2-NMTO nanoheterojunctions enjoyed high photodegradative ability for a RhB pollutant. The photoinduced electron-hole pairs were separated effectively by the TiO2-NMTO nanoheterojunctions, which were directly observed by surface potential measurements with a scanning Kelvin probe microscopy. The photogenerated electrons accumulate at interface due to the high density of interface states, and holes remain TiO2 and NMTO particles, other than they migrate from one part to another in heterojunctions by comparing the surface potentials under illumination with different wavelengths.

  6. Development of sulfide solid electrolytes and interface formation processes for bulk-type all-solid-state Li and Na batteries

    Directory of Open Access Journals (Sweden)

    Akitoshi Hayashi

    2016-07-01

    Full Text Available All-solid-state batteries with inorganic solid electrolytes are recognized as an ultimate goal of rechargeable batteries because of their high safety, versatile geometry and good cycle life. Compared to thin-film batteries, increasing the reversible capacity of bulk-type all-solid-state batteries using electrode active material particles is difficult because contact areas at solid–solid interfaces between the electrode and electrolyte particles are limited. Sulfide solid electrolytes have several advantages of high conductivity, wide electrochemical window, and appropriate mechanical properties such as formability, processability, and elastic modulus. Sulfide electrolyte with Li7P3S11 crystal has the highest Li+ ion conductivity of 1.7 × 10-2 S cm-1 at 25 °C. It is far beyond the Li+ ion conductivity of conventional organic liquid electrolytes. The Na+ ion conductivity of 7.4 × 10-4 S cm-1 is achieved for Na3.06P0.94Si0.06S4 with cubic structure. Moreover, formation of favorable solid–solid interfaces between electrode and electrolyte is important for realizing solid-state batteries. Sulfide electrolytes have better formability than oxide electrolytes. Consequently, a dense electrolyte separator and closely attached interfaces with active material particles are achieved via room-temperature sintering of sulfides merely by cold pressing without heat treatment. Elastic moduli for sulfide electrolytes are smaller than that of oxide electrolytes, and Na2S-P2S5 glass electrolytes have smaller Young’s modulus than Li2S-P2S5 electrolytes. Cross-sectional SEM observations for a positive electrode layer reveal that sulfide electrolyte coating on active material particles increases interface areas even with a minimum volume of electrolyte, indicating that the energy density of bulk-type solid-state batteries is enhanced. Both surface coating of electrode particles and preparation of nanocomposite are effective for increasing the reversible

  7. Musicoterapia institucional na saúde do trabalhador: conexões, interfaces e produções Institutional music therapy in workers' health: connections, interfaces and production

    Directory of Open Access Journals (Sweden)

    Laize Guazina

    2009-04-01

    Full Text Available Este trabalho propõe e analisa a Musicoterapia como estratégia de produção de saúde do trabalhador, em estudo desenvolvido junto a profissionais técnicas de enfermagem de uma Unidade de Terapia Intensiva infantil de um hospital público da cidade de Porto Alegre. A atenção à saúde dos trabalhadores produz novas questões teórico-conceituais, práticas, éticas e políticas no campo da Musicoterapia, ligadas ao território do trabalho e suas configurações contemporâneas, ao "ser" trabalhador e à saúde, e que têm implicações sobre a Musicoterapia e o musicoterapeuta na contemporaneidade. À luz das contribuições de Foucault, este trabalho centraliza-se na discussão do hospital como território de produção de subjetividades, a partir do desenvolvimento do conceito de 'Panáudio', mapeando e analisando efeitos deste dispositivo, que se efetivam pelos contextos sonoros. Aponta controles e resistências possíveis e propõe a produção de novas subjetividades pelo uso das práticas musicais em Musicoterapia em uma proposta de abordagem institucional.This paper proposes and analyzes Music Therapy as a production strategy towards workers' health in a study developed with nurse technicians from a Children's Intensive Care Center of a public hospital in Porto Alegre. The concern with workers' health brings about new theoretical, conceptual, ethical and political queries in the field of Music Therapy, such queries are related with the working field and its contemporary features, with the working being and with health; these queries produce consequences on Music Therapy and Music therapists contemporarily. Based on Foucault's contributions, this paper focuses on the discussion about hospitals being a field for subjectivities production, from the development of the 'Panaudio' concept, mapping and analyzing its effects, which are effective by sound contexts. This paper also points out possible controls and resistances and proposes the

  8. A educação na era da TV digital: interfaces e conexões / Education in the age of digital TV: interfaces and connections

    Directory of Open Access Journals (Sweden)

    Simone de Lucena Ferreira

    2011-04-01

    Full Text Available No final da década de 1980 alguns países da Europa bem como o Japão e os Estados Unidos iniciaram pesquisas para o desenvolvimento de modelos de TV digital. No Brasil, somente em 2003 após publicação do Decreto 4.901, começou o desenvolvimento de pesquisas visando a construção do Sistema Brasileiro de Televisão Digital (SBTVD que dentre outros objetivos deveria promover a inclusão social e a formação de uma rede de educação a distância. A TV digital é considera por alguns autores como uma nova mídia, pois ela traz características do computador e da televisão. Desta forma esta nova mídia pode facultar novas formas de comunicação, de produção de conteúdos e de interatividade, o que para a área da educação são aspectos de fundamental importância, uma vez que até o momento com a televisão analógica não há possibilidades de construção de conteúdos colaborativos tanto pelo fator tecnológico quanto principalmente pelo fator político centralizador das produções disponíveis hoje. Nesse texto analisamos alguns aspectos da implantação da TV digital em Portugal e no Brasil bem como as possibilidades de utilização do Serviço de Apoio ao Professor em Sala de Aula (SAPSA desenvolvido pela Fundação Centro de Pesquisa e Desenvolvimento em Telecomunicações (CPqD. Como resultado deste trabalho, constatamos a potencialidade da TV digital na formação de redes de colaboração necessárias para o desenvolvimento da educação. Neste sentido, percebemos que cabe igualmente aos responsáveis pelos sistemas de educação e a nós educadores evidenciarmos que queremos uma TV digital que possibilite a construção de redes colaborativas capazes de potencializar a interconexão entre educação, culturas e conhecimentos.AbstractAt the end of the 80’s, some European countries as well as Japan and the United States started researches for the development of digital tv models. In brazil, after publishing the law # 4

  9. Interfaces entre Psicologia e Direito: desafios da atuação na defensoria pública

    Directory of Open Access Journals (Sweden)

    Marina Wanderley Vilar de Carvalho

    2013-01-01

    Full Text Available O presente artigo propõe-se a narrar as experiências do início do trabalho da Psicologia na Defensoria Pública do Estado de São Paulo. Pretende-se, a partir de alguns casos encaminhados e de situações cotidianas no ambiente de trabalho, desenvolver reflexões críticas acerca das demandas endereçadas - tanto por parte dos usuários como dos outros profissionais -, de respostas possíveis e de colocar em análise o lugar que a Psicologia está sendo chamada a ocupar. Para tanto, uma ferramenta importante que se faz necessária é a análise de implicações, proposta pela análise institucional, em especial por René Lourau. Observa-se que as demandas se dividem em resoluções extrajudiciais de conflitos, apoio e encaminhamento para a rede de serviços municipais ou para acompanhamento psicológico. O desafio, na prática, é dirigir um olhar diferenciado a partir da compreensão das produções socio-histórico-econômico-familiares do sujeito de maneira a não reproduzir sofrimentos e opressões; é constantemente colocar-se como profissional envolvido na promoção da cidadania e na autonomia e no empoderamento dos sujeitos, é, em uma perspectiva ética, entender a nossa atuação como produtora de demandas, de verdades, de mundos.

  10. Contribuições da ergonomia e do design na concepção de interfaces multimidia

    OpenAIRE

    Hiratsuka, Tei Peixoto

    1996-01-01

    Dissertação (mestrado) - Universidade federal de Santa Catarina, Centro Tecnologico Esta dissertação demonstra considerações relacionadas ao emprego do design e da ergonomia, sobretudo da interação homem-computador necessárias à concepção de sistemas com interfaces multimídia. Esta necessidade surgiu da constatação de que a maioria das instituições que produzem multimídia estão negligenciando aspectos importantes do design e da ergonomia durante o desenvolvimento desse tipo de produto, ou ...

  11. SER CRIANÇA NA CLASSE HOSPITALAR: A DIMENSÃO PSICOLÓGICA NA INTERFACE EDUCAÇÃO E SAÚDE

    Directory of Open Access Journals (Sweden)

    Rosana Maria Menzani

    2017-07-01

    Full Text Available A hospitalização na infância pode alterar significativamente o desenvolvimento dos pacientes envolvidos, uma vez que restringe as suas relações de convivência, dado o afastamento da família, dos amigos e da sua escola, substituída por um ambiente onde a dor e a doença podem vir a ser presenças constantes. O principal objetivo deste artigo é apresentar, por meio de uma revisão da literatura, a contribuição da Classe Hospitalar (CH sobre as dificuldades recorrentes da hospitalização de crianças em idade escolar, considerando-se os aspectos emocionais, físicos e cognitivos envolvidos neste contexto. Com base no levantamento bibliográfico realizado, verificou-se a existência de um consenso sobre os benefícios da CH, que, ao promover aprendizagem de conteúdos escolares, concomitantemente participa positivamente do desenvolvimento cognitivo e emocional dos alunos.

  12. N@a and N@d: Oligomer and Partner Specification by Asparagine in Coiled-Coil Interfaces.

    Science.gov (United States)

    Fletcher, Jordan M; Bartlett, Gail J; Boyle, Aimee L; Danon, Jonathan J; Rush, Laura E; Lupas, Andrei N; Woolfson, Derek N

    2017-02-17

    The α-helical coiled coil is one of the best-studied protein-protein interaction motifs. As a result, sequence-to-structure relationships are available for the prediction of natural coiled-coil sequences and the de novo design of new ones. However, coiled coils adopt a wide range of oligomeric states and topologies, and our understanding of the specification of these and the discrimination between them remains incomplete. Gaps in our knowledge assume more importance as coiled coils are used increasingly to construct biomimetic systems of higher complexity; for this, coiled-coil components need to be robust, orthogonal, and transferable between contexts. Here, we explore how the polar side chain asparagine (Asn, N) is tolerated within otherwise hydrophobic helix-helix interfaces of coiled coils. The long-held view is that Asn placed at certain sites of the coiled-coil sequence repeat selects one oligomer state over others, which is rationalized by the ability of the side chain to make hydrogen bonds, or interactions with chelated ions within the coiled-coil interior of the favored state. We test this with experiments on de novo peptide sequences traditionally considered as directing parallel dimers and trimers, and more widely through bioinformatics analysis of natural coiled-coil sequences and structures. We find that when located centrally, rather than near the termini of such coiled-coil sequences, Asn does exert the anticipated oligomer-specifying influence. However, outside of these bounds, Asn is observed less frequently in the natural sequences, and the synthetic peptides are hyperthermostable and lose oligomer-state specificity. These findings highlight that not all regions of coiled-coil repeat sequences are equivalent, and that care is needed when designing coiled-coil interfaces.

  13. Influência da decorticação vertebral na neoformação dos tecidos da interface do enxerto ósseo Influence of vertebral decortication on tissue neoformation at bone graft interface

    Directory of Open Access Journals (Sweden)

    Fabiano Ricardo Tavares Canto

    2010-01-01

    Full Text Available OBJETIVO: Determinar a influência da decorticação dos elementos posteriores da coluna vertebral na integração do enxerto ósseo, considerando a avaliação quantitativa e qualitativa dos tecidos (ósseo, cartilaginoso e fibroso da interface entre o leito receptor e o enxerto ósseo. MÉTODOS: Foram utilizados 24 ratos Wistar, divididos em dois grupos de acordo com a realização da decorticação do leito receptor do enxerto. Foi utilizado enxerto autólogo derivado dos processos espinhosos das duas primeiras vértebras lombares. A neoformação tecidual na interface entre o leito receptor e seu enxerto ósseo foi avaliada após três semanas por meio de análise histomorfométrica. RESULTADOS: No grupo de animais com o leito receptor decorticado a média da porcentagem de osso neoformado foi de 40%±6,1, e 7,7%± 3,5 no grupo não decorticado (p=0,0001. A média da porcentagem de formação do tecido cartilaginoso no grupo decorticado foi de 7,2%±3,5, no não decorticado de 10,9%±5,6 (p=0,1123. A formação de tecido fibroso no grupo decorticado apresentou média de 8,6%±3,9 e no não decorticado e 24%±10,1, (p=0,0002. CONCLUSÕES: A decorticação acelerou o processo histológico da integração do enxerto ósseo. Ocorrendo maior produção de tecido ósseo neoformado e predomínio da ossificação do tipo intramembranosa no grupo de animais nos quais a decorticação foi realizada.OBJECTIVE: To determine the influence of vertebral posterior elements decortication in bone graft integration, considering a qualitative and quantitative evaluation of the (bone, cartilaginous, and fibrous tissues in the interface between the receptor bed and the bone graft. METHODS: Twenty-four Wistar rats were divided into two groups according to the decortication of the bone graft receptor bed. Autologous bone graft from the first and second lumbar vertebrae were used. The new tissue formation in the interface between the receptor bed and its bone graft

  14. AVALIAÇÃO DA USABILIDADE DE INTERFACES DE SISTEMAS VGI NA TAREFA DE INSERÇÃO DE FEIÇÕES.

    Directory of Open Access Journals (Sweden)

    Péricles Luiz Picanço Jr

    Full Text Available Um sistema de mapeamento voluntário (VGI - Volunteer Geographic Information, é uma aplicação computacional na qual um indivíduo voluntariamente visualiza, organiza, e dissemina livremente dados e informações geográficas que podem ser usadas gratuitamente por qualquer usuário (Tulloch, 2008. O objetivo principal de um sistema VGI é permitir que um voluntário colete dados geográficos; para isso é essencial considerar, durante o processo de desenvolvimento da aplicação, a interação do usuário com os elementos da interface. Sistemas VGI como o OpenStreetMap têm diferentes processos de interação com o usuário, os quais implicam em diferentes tipos de interfaces, funcionalidades e formulários. A execução de uma tarefa, assim como o seu resultado, pode diferir dependendo do sistema utilizado. Diferentes processos de interação acarretam em diferentes experiências do usuário, e consequentemente afetam a qualidade e a confiabilidade da informação espacial coletada. O processo de interação pode também influenciar a retenção de usuários no sistema, bem como a adesão de novos voluntários. O objetivo desta pesquisa é obter um panorama de aspectos da usabilidade de sistemas VGI, especificamente na tarefa de inserção de feições geográficas, desde o acesso ao sistema até o sucesso ou falha na execução da tarefa. Para execução desta pesquisa foram realizados testes com usuários com diferentes tipos de familiaridade com os sistemas Wikimapia, OpenStreetMap, e Wikiloc, com o objetivo final de inserir uma ou mais feições geográficas nesses aplicativos

  15. As interfaces do discurso de auto-ajuda: análise em autores brasileiros na perspectiva discursiva.

    OpenAIRE

    Cercato, Nilza Carolina Suzin

    2007-01-01

    Neste trabalho, há uma análise do discurso de auto-ajuda em duas perspectivas teóricas fundamentais: Análise de Discurso, na linha francesa de Michel Pêcheux e Retórica. Para trabalhar com a Análise de Discurso, o procedimento de análise inicia-se com o estudo das condições de produção, nas quais se fazem importantes, em primeiro lugar, o contexto situacional, dando conta da emergência do termo “auto-ajuda” caracterizado como um gênero específico, com características e finalidades determinada...

  16. Prostituição na adolescência: interfaces com a instituição familiar

    Directory of Open Access Journals (Sweden)

    Stella Maris Nogueira Botelho

    2004-04-01

    Full Text Available Pesquisa realizada com o objetivo de conhecer e analisar o contexto e o significado da dinâmica da instituição familiar e suas interfaces com a prostituição de adolescentes. A coleta de dados foi realizada através de entrevistas das Histórias de Vida e o conteúdo das falas foi analisado pela análise de conteúdo, modalidade análise temática. Encontramos uma grande lacuna provocada pela ausência de diálogo e pela forma como foram vivenciadas as situações de abandono, morte materna e o convívio com os familiares por não serem filhas biológicas de um dos pais, rompendo com as relações de confiança, respeito e afeto provocando a perda de uma identidade individual e coletiva. A violência intrafamiliar foi identificada através de situações de abuso sexual, negligência e violência física, evidenciando uma verdadeira escola de desrespeito, abuso do poder e a hierarquia de gênero e etária.

  17. Avaliação experimental dos metodos de prevenção de fissuras na interface alvenaria de vedação e pilar de concreto

    OpenAIRE

    Andre Penteado Tramontin

    2005-01-01

    Resumo: As fissuras na interface alvenaria-estrutura são comuns e pouco se conhece a respeito da sua ocorrência, embora sejam freqüentes, especialmente as que aparecem na ligação alvenaria-pilar de concreto. O objetivo deste trabalho foi estudar a melhor técnica de ancoragem entre alvenaria-estrutura, avaliando sua eficiência no combate a esse tipo de fissura. Foram utilizados para a elaboração dos ensaios, além dos materiais usados na alvenaria de vedação (bloco cerâmico, argamassa etc), dif...

  18. Marginal fit at cylinder-abutment interface before and after overcasting procedure Adaptação marginal na interface intermediário-cilindro antes e após as sobrefundições

    Directory of Open Access Journals (Sweden)

    Luciana Martins Cres Moraes

    2005-12-01

    Full Text Available The aim of this study was to measure marginal fit at cylinder-abutment interface, before and after overcasting procedure. A hexagonal implant was fixed to a stainless steel base and a Estheticone-like abutment used during all the experiment. Before casting procedure, gold (Group I and Ni-Cr-Be (Group II premachined cylinders were tightened to the abutment with gold and titanium screws (in both groups, with 10Ncm and 20Ncm torque values for the same screw type. Vertical measures were taken at the light microscope (Mitutoyo 5050, Tokyo, Japan three times in six different parts along the abutment-cylinder interface for each torque value. Cylinders were overcast with Ag-Pd (Group I or Ni-Cr-Be (Group II alloy. After casting, the same measures and torque values were repeated. Intragroup differences (10 or 20Ncm torque values, before and after casting and intergroup differences (10 and 20Ncm torque values, before or after casting were analyzed by the Paired t Test; (pO objetivo deste estudo foi medir a adaptação marginal na interface intermediário-cilindro, antes e após a sobrefundição. Um implante do tipo hexágono externo afixado numa base de aço inoxidável e um intermediário do tipo Estheticone foram usados durante todo o experimento. Antes das fundições, cilindros pré-usinados de ouro (Grupo I e de Ni-Cr-Be (Grupo II foram aparafusados ao intermediário com parafusos de ouro e titânio em ambos os grupos, com torques de 10Ncm e 20Ncm para o mesmo tipo de parafuso. As medidas verticais foram feitas num microscópio óptico (Mitutoyo 5050, Tóquio, Japão três vezes em seis locais diferentes ao longo da interface intermediário-cilindro para cada valor de torque. Os cilindros foram encerados e fundidos tanto em liga de Ag-Pd (Grupo I ou liga de Ni-Cr-Be (Grupo II. Após as fundições, as mesmas medidas e os mesmos valores de torque foram repetidos. As diferenças intra-grupo (torques de 10 ou 20Ncm, antes e após as fundições e as

  19. O eco-feedback na interface da lavadora de roupas como estratégia de design para mudança de comportamento

    Directory of Open Access Journals (Sweden)

    Marcelo dos Santos Forcato

    2015-01-01

    Full Text Available Este artigo reporta pesquisa que teve como objetivo identificar meta-requisitos para o projeto de eco-feedback em lavadoras de roupas voltadas ao morador de habitação de interesse social (HIS. A suposição é que através da aplicação desta estratégia de design na interface da lavadora ocorra o início de um processo de mudança comportamental. O método de pesquisa consistiu de Pesquisa-ação fundamentada pelo Método RITE (Medlock et al., 2002, que permitiu um processo cíclico de desenvolvimento e avaliação de eco-feedbacks para lavadoras automáticas, envolvendo usuários, pesquisadores e fabricante. Neste artigo será reportado apenas o último Ciclo de Ação, o qual aborda um pré-teste de interação. Os resultados da pesquisa incluem uma lista de meta-requisitos para o projeto de eco-feedback para máquinas de lavar roupa.

  20. Práticas de monitoramento na gestão municipal em saúde e sua interface com a enfermagem

    Directory of Open Access Journals (Sweden)

    Camila Luana Oliveira Reuter

    2017-05-01

    Full Text Available RESUMO Objetivo Analisar as práticas de monitoramento desenvolvidas pelos municípios e as interfaces com a prática da Enfermagem. Métodos Estudo exploratório descritivo com abordagem qualitativa, realizado nos seis municípios da Região de Saúde 10 do Rio Grande do Sul. Foram realizadas entrevistas semiestruturadas junto a seis gestores de saúde e um assessor, com análise de conteúdo. Resultados As categorias finais que emergiram dos resultados foram “Práticas de monitoramento na gestão municipal em saúde” e “Dificuldades de implantação do monitoramento pelos gestores”. Conclusões Os gestores apontaram potencialidades e fragilidades nas práticas de monitoramento municipal de saúde. A incorporação deste processo é primordial à prática dos profissionais, especialmente da enfermagem, promovendo um incremento no uso de novas ferramentas que propiciam a inovação para subsidiar a tomada de decisão.

  1. Realidade Virtual como Intervenção na Síndrome de Down: uma Perspectiva de Ação na Interface Saúde e Educação

    Directory of Open Access Journals (Sweden)

    Suelen Moraes de Lorenzo

    2015-06-01

    Full Text Available O presente estudo teve por objetivo avaliar os resultados de intervenções com uso da Realidade Virtual perante as necessidades psicomotoras de uma criança com Síndrome de Down (SD. Para tanto, foram utilizados como instrumento de avaliação a Escala de Desenvolvimento Motor na forma de teste pré e pós-intervenção e como recurso de intervenção o videogame Xbox 360 com sensor kinect. Os resultados alcançados após 20 sessões de intervenção revelaram uma melhora nas habilidades de motricidade global, equilíbrio, esquema corporal e organização espacial, entretanto o desenvolvimento da motricidade fina e linguagem/organização temporal se mantiveram estáveis. Todas estas seis áreas básicas da motricidade humana são fundamentais para o processo de alfabetização e, consequentemente, para o ensino e aprendizagem de conteúdos escolares. As intervenções clínicas realizadas com o uso da Realidade Virtual, em uma abordagem na interface saúde e educação, contribuíram para o desenvolvimento psicomotor do participante da pesquisa, podendo-se inferir sobre os desdobramentos do aperfeiçoamento destas habilidades e seus respectivos benefícios para o desempenho escolar, sobretudo nas atividades de leitura e escrita.

  2. Bioética e promoção da saúde docente na educação superior: uma interface necessária/Bioethics and promotion of teacher health in higher education: an interface required

    Directory of Open Access Journals (Sweden)

    Ivani Nadir Carlotto

    2017-12-01

    Full Text Available Data de Submissão: 1-11-2017 Data de Aceitação 20-12-2017A abordagem denominada Health Promoting Universities (HPU ou Universidades Promotoras da Saúde (UPS – Organização Mundial da Saúde (OMS considera que as Instituições de Ensino Superior (IES possuem um papel preponderante na preservação da saúde e bem-estar da comunidade acadêmica. As IES são, sob este paradigma, conduzidas pelos marcos conceituais da promoção da saúde (PS, e por valores interdisciplinares como inclusão, equidade, justiça social e sustentabilidade. A Bioética, em conjunto com as UPS e a PS, apresenta-se como uma ferramenta reflexiva, mutuamente compartilhada e interdisciplinar que objetiva a adequação das ações que compreendem a vida e a cidadania, em seu caráter equitativo e inclusivo, no contexto da Educação Superior. Neste texto a Bioética busca refletir sobre a PS docente nas IES, contribuindo para a construção de processos qualificados de ações em saúde docente.Bioethics and promotion of teacher health in higher education: an interface requiredThe Health Promoting Universities (HPU - World Health Organization (WHO approach considers that Higher Education Institutions (HEI play a preponderant role in preserving the health and well-being of the academic community. HEIs under this paradigm are driven by conceptual frameworks of health promotion (HP, and by interdisciplinary values such as inclusion, equity, social justice and sustainability. Bioethics, together with HPU and HP, presents itself as a reflexive, mutually shared and interdisciplinary tool that aims at the adequacy of actions that comprise life and citizenship, in its equitable and inclusive character, in the context of Higher Education. In this text Bioethics seeks to reflect on the teaching HP in HEI, contributing to the construction of qualified processes of actions in teacher’s health.Keywords: Bioethics; Higher Education; Teachers; Health Promotion

  3. Influência do agente de união na resistência ao cisalhamento da interface titânio/polímero de vidro Bonding agent influence on shear bond strength of titanium/polyglass interface

    Directory of Open Access Journals (Sweden)

    Denise Kanashiro Oyafuso

    2003-09-01

    Full Text Available Há poucas informações em relação à efetividade da união entre compósitos e superfícies metálicas. Este estudo avaliou a influência de dois agentes de união na resistência ao cisalhamento da interface formada pelo titânio comercialmente puro (Ti cp e um compósito (Artglass/ Heraeus Kulzer. Vinte estruturas metálicas (4mm de diâmetro e 5mm de altura de titânio grau 1 foram fundidas, jateadas com partículas de óxido de alumínio (250ìm e separadas em dois grupos. Para cada grupo foi utilizado um agente de união (Sistema Siloc-Pre ou Retention Flow como procedimento anterior à aplicação do material opaco. Sobre este foram aplicados camadas do polímero referente à dentina com o auxílio de uma matriz de teflon. A manipulação e polimerização foram realizadas de acordo com as recomendações do fabricante. Os corpos-de-prova foram armazenados em água destilada por 24 horas à 37ºC e termociclados (5º e 55ºC/ 500ciclos. O teste de resistência ao cisalhamento foi realizado em uma máquina de ensaios universal (Instron com velocidade de 5mm/min. Os dados foram tratados estatisticamente pela Análise de Variância one-way (á=0,5. Os resultados indicaram que o sistema adesivo Retention Flow foi estatisticamente melhor do que o Siloc, com médias de 20,74MPa e 11,65MPa, respectivamente. Foi possível concluir que o sistema de união influenciou na adesão entre o titânio grau I e o polímero de vidro estudado.There is little information regarding bond strengths of polyglass to metal alloys. This study evaluated the influence of bonding system on shear bond strength of a composite resin (Artglass/Heraeus Kulzer to cast titanium (Ti. Twenty metallic structures (4mm in diameter, 5mm thick of titanium grade I were cast shaped and abraded with 250mm aluminum oxide and separated into two groups. For each group was applied one bonding system (Siloc or Retention Flow before opaque and dentin polymer superposition. This procedure

  4. Cultura, cidadania e patrimônio cultural: interfaces entre a escola, a cidade e as políticas culturais na cidade de Guararema, SP

    Directory of Open Access Journals (Sweden)

    Francisco Carlos Franco

    2015-06-01

    Full Text Available http://dx.doi.org/10.5007/2175-795X.2015v33n1p319 O presente texto aborda a questão do patrimônio material e imaterial e seu potencial educativo na formação cidadã de alunos da educação básica. Tem como objetivo refletir sobre as perspectivas de desenvolvimento de uma Educação Patrimonial em uma cidade educadora. Fundamenta essa discussão estudos que analisam a educação sob uma perspectiva crítica, em que esta supere a simples transmissão e contemplação dos bens patrimoniais destituídas de sentido, presentes em muitas propostas educativas em instituições de educação formal e não formal, de modo, ainda, que haja colaboração com a gestão do patrimônio cultural. Sendo assim, este texto contempla reflexões sobre a educação patrimonial como uma área emergente na educação e analisa uma experiência na região do alto Tietê, no município de Guararema. Os primeiros resultados apontam para considerações de que a Educação Patrimonial deve ser um diálogo permanente entre as vivências, experiências e percepções dos educandos e cidadãos ante os bens culturais e suas formas de ser e de agir cotidianos, com os conteúdos escolares e ações educativas desenvolvidas nas unidades escolares e instituições culturais, como forma de entender os processos constituintes de sua identidade cultural auxiliando na gestão do patrimônio cultural.   Culture, citizenship and cultural heritage: interfaces between the school, the city and cultural policies in the city of Guararema, SP  Abstract This paper addresses the issue of tangible and intangible heritage and its educational potential in formation of citizenship of basic education students. It aims to reflect on the perspectives for developing a heritage education in an educating city. This discussion is based in the Heritage Education in studies which examine education from a critical perspective , in that it exceeds the simple transmission and

  5. Influência do macheamento na interface do parafuso e do tecido ósseo na fase imediata pós-implante Influencia del taladramiento en la interfase del tornillo y del tejido óseo durante la fase inmediata post implante The influence of tapping techniques on the interface bone screw/bone tissue in immediate postoperative period

    Directory of Open Access Journals (Sweden)

    Fabiano Pinheiro de Lemos Masson

    2009-06-01

    Full Text Available OBJETIVO: analisar experimentalmente as alterações agudas da interface entre o osso e o implante nas vértebras cervicais após a realização do macheamento do orifício piloto. MÉTODOS: foram utilizados cinco carneiros da raça Santa Inês deslanados. Na terceira vértebra cervical, foram feitos orifícios de 2,5 mm, de ambos os lados, na parte proximal e distal. No orifício proximal direito, foi realizado o macheamento antes da inserção do parafuso cortical de 3,5 mm (Grupo A; no orifício proximal esquerdo, o parafuso foi inserido sem macheamento (Grupo B; os outros dois orifícios distais foram utilizados como controle (Grupo C. As alterações da interface entre o osso e o implante foram analisadas por meio de estudo histomorfométrico, considerando o número de trabéculas fraturadas entre os filetes de rosca; a maior distância da fratura trabecular transversal provocada pela inserção do parafuso; a maior extensão da fratura trabecular longitudinal provocada pela inserção do parafuso e a linha de contato na interface osso-parafuso. RESULTADOS: o macheamento do orifício piloto provocou alterações da microestrutura do tecido ósseo ao redor do implante quando comparado às alterações produzidas pela inserção do parafuso sem o macheamento ou orifício piloto. A avaliação do contato entre o osso e o implante foi o parâmetro que apresentou diferença estatística na comparação entre a colocação do implante com e sem machemanto. CONCLUSÃO: na comparação com o orifício piloto, todos os parâmetros analisados apresentaram diferença estatística.OBJETIVO: analizar experimentalmente las alteraciones agudas de la interfase entre el hueso y el implante en las vértebras cervicales, después de taladrar el orificio piloto. MÉTODOS: fueron utilizados cinco carneros de la raza Santa Inés sin lana. En la tercera vértebra cervical, fueron realizados en ambos lados unos orificios de 2.5 mm en la parte proximal y distal. En

  6. Investigating the effect of multiple grain-grain interfaces on electric transport behavior of [50 wt% BaFe12O19-50 wt% Na0.5Bi0.5TiO3] magnetoelectric nanocomposite system

    Science.gov (United States)

    Pattanayak, Ranjit; Raut, Subhajit; Dash, Tapan; Mohapatra, Soumyaranjan; Muduli, Rakesh; Panigrahi, Simanchala

    2017-05-01

    Polycrystalline [50 wt% BaFe12O19 (BaM)-50 wt% Na0.5Bi0.5TiO3 (NBT)] particulate novel magnetoelectric nanocomposite system was successfully fabricated by solid state reaction technique. The Rietveld refinement of X-ray diffraction pattern was provided the evidence about the pure phase formation of desired nanocomposite system as well as the presence of both ferrimagnetic (FM) BaM & ferroelectric (FE) NBT phases separately. The Field Scanning Electron Micrograph (FESEM) and Scanning Tunneling Electron Micrograph (STEM) explored the information about grain size and connectivity of the composite system. The XPS study was helped to examine the presence of oxygen vacancy (Ov) as well as multi oxidation states of transition metal ions for nanocomposite system. In this report we have systematically examined the conduction mechanism of different interfaces (BaM-BaM, BaM-NBT and NBT-NBT) by the help of complex impedance spectroscopy technique. From our investigation it was observed that, different interfaces activates at different temperature ranges. Due to absence of OV, BaM-NBT interfaces conduction dominants over BaM-BaM interfaces conduction even at room temperature (RT). The mechanism behind the appeared high dielectric loss (tanδ) at RT which was reduced when NBT-NBT interfaces were activates at higher temperature was explained by Maxwell-Wagner type interfacial polarization concept.

  7. Kinetic Interface

    DEFF Research Database (Denmark)

    2009-01-01

    A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises.......A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises....

  8. Visualização da Informação na construção de interfaces amigáveis para Sistemas de Recuperação de InformaçãoInformation visualization to user-friendly interface construction for information retrieval systems

    Directory of Open Access Journals (Sweden)

    Jessica Monique de Lira Vieira

    2011-10-01

    Full Text Available As informações representadas por meio de recursos visuais auxiliam os Sistemas de Recuperação de Informação (SRIs a exercerem seu objetivo principal, o de recuperar informações relevantes que atendam a necessidade informacional de seus usuários. Sob esse contexto, objetiva-se analisar as alternativas propostas pela área de Visualização da Informação que visam facilitar a apropriação de informação pelo usuário, a partir do uso de interfaces visuais. A metodologia consiste em revisão de literatura com foco na potencial contribuição da representação visual de informações na construção de interfaces amigáveis para SRIs, auxiliando o usuário na busca, localização e recuperação de informações de seu interesse. Para demonstrar a importância do uso de estruturas de Visualização da Informação na comunicação com o usuário, apresenta-se alguns SRIs que fazem uso de recursos gráficos e interfaces amigáveis. As informações disponibilizadas por meio de representação visual proporcionam ao usuário uma melhor compreensão acerca das mesmas, como também a descoberta de novos conhecimentos.

  9. Performance of adhesives base on PU, Epoxy and silane in the Kevlar/alumina interface; Desempenho de adesivos a base de PU, epoxi e silano na interface Kevlar/alumina

    Energy Technology Data Exchange (ETDEWEB)

    Noronha, K.F.; Melo, F.C.L.; Lopes, C.M.A. [Divisao de Materiais, Instituto de Aeronautica e Espaco (IAE), Sao Jose dos Campos, SP (Brazil); Divisao de Engenharia Mecanica-Aeronautica, Instituto Tecnologico de Aeronautica (ITA), Sao Jose dos Campos, SP (Brazil)], e-mail: cmoniz@iae.cta.br

    2010-07-01

    Hybrid ceramic/polymer composites are used for ballistic protection due to the good high-velocity impact absorption properties. The choice of the proper adhesive used to bond ceramic and polymer layers is one of the major issues for hybrid armor development due to its influence in the ballistic resistance behaviour. This work presents an adhesion study in composites of aramid textile (Kevlar) and alumina. Adhesives of different chemical nature, based on polyurethane, epoxy and silane were evaluated. T-Peel test was performed for the interface characterization and the post- failure surfaces were examined by optical microscopy. In all samples the failure occurred at the interface. The silane-based adhesive showed no interaction with the polymer, while the PU hot melt adhesive presented the highest adhesion strengths. (author)

  10. Aplicações de QCM, EIS e SPR na investigação de superfícies e interfaces para o desenvolvimento de (biosensores

    Directory of Open Access Journals (Sweden)

    Damos Flavio Santos

    2004-01-01

    Full Text Available The use of the quartz crystal microbalance process, electrochemical impedance spectroscopy and surface plasmon resonance for characterizing thin films and monitoring interfaces is presented. The theorical aspects of QCM, EIS and SPR are introduced and the main application areas are outlined. Future prospects of the combined applications of QCM, EIS and SPR methods in the studies of interfacial processes at surfaces are also discussed.

  11. Interface Consistency

    DEFF Research Database (Denmark)

    Staunstrup, Jørgen

    1998-01-01

    This paper proposes that Interface Consistency is an important issue for the development of modular designs. Byproviding a precise specification of component interfaces it becomes possible to check that separately developedcomponents use a common interface in a coherent matter thus avoiding a very...... significant source of design errors. Awide range of interface specifications are possible, the simplest form is a syntactical check of parameter types.However, today it is possible to do more sophisticated forms involving semantic checks....

  12. Trabalhadores de uma Unidade Básica de Saúde na interface com a violência Trabalhadores de uma Unidade Básica de Saúde na interface com a violência Workers at a basic health unit who interface with violence

    Directory of Open Access Journals (Sweden)

    Isabela Silva Câncio Velloso

    2011-01-01

    Full Text Available OBJETIVO: Este estudo buscou compreender como a violência social interfere no trabalho das equipes de Saúde da Família de uma Unidade Básica de Saúde de Belo Horizonte - MG. MÉTODOS: Trata-se de um estudo de natureza qualitativa do tipo estudo de caso. Os dados foram coletados por entrevistas de roteiro semiestruturado com 12 trabalhadores de uma Unidade Básica de Saúde de Belo Horizonte - 2 enfermeiros, 5 auxiliares de enfermagem, 3 ACS's, 1 médico e 1 vigilante - e submetidos à análise de discurso. RESULTADOS: Os trabalhadores reconheceram as situações de violência na comunidade onde trabalham, sentem medo, insegurança e adotam vários mecanismos de defesa para diminuir o sofrimento. Referiram também sentirem-se prejudicados com as precárias condições de trabalho. CONCLUSÃO: A efetividade da assistência à saúde é desafiada pela violência, e requer estratégias para lidar com a mesma dentro da unidade estabelecendo relações com outras instituições sociais.OBJETIVO: En este estudio se tuvo como objetivo comprender cómo la violencia social interfiere en el trabajo de los equipos de Salud de la Familia de una Unidad Básica de Salud de Belo Horizonte - MG. MÉTODOS: Se trata de un estudio de naturaleza cualitativa de tipo estudio de caso. Los datos fueron recolectados por entrevistas con preguntas semiestructuradas realizadas a 12 trabajadores de una Unidad Básica de Salud de Belo Horizonte - 2 enfermeros, 5 auxiliares de enfermería, 3 ACS's, 1 médico y 1 vigilante - y sometidos al análisis de discurso. RESULTADOS: Los trabajadores reconocieron las situaciones de violencia en la comunidad donde trabajan, sienten miedo, inseguridad y adoptan varios mecanismos de defensa para disminuir el sufrimiento. Refirieron también sentirse perjudicados con las precarias condiciones de trabajo. CONCLUSIÓN: La efectividad de la asistencia a la salud es desafiada por la violencia, y requiere estrategias para lidiar con la misma

  13. Interface models

    DEFF Research Database (Denmark)

    Ravn, Anders P.; Staunstrup, Jørgen

    1994-01-01

    This paper proposes a model for specifying interfaces between concurrently executing modules of a computing system. The model does not prescribe a particular type of communication protocol and is aimed at describing interfaces between both software and hardware modules or a combination of the two....... The model describes both functional and timing properties of an interface...

  14. Estudo comparativo da resistência adesiva da interface resina/braquete, sob esforços de cisalhamento, empregando três resinas compostas e três tipos de tratamento na base do braquete Comparative study of the shear bond strength of the resin/bracket interface, using three different resin composites and three different treatments in the base of the bracket

    Directory of Open Access Journals (Sweden)

    Adriano Lia Mondelli

    2007-06-01

    Full Text Available OBJETIVO: considerando que, até o momento, a união braquete/resina é conseguida mecânica e quimicamente, esse estudo propôs avaliar: 1 a eficiência da metodologia empregada para avaliação da força de união da interface resina/braquete; 2 a resistência adesiva da interface resina/braquete sob esforços de cisalhamento, empregando três marcas comerciais de resina composta (Concise ortodôntico, Transbond-XT e Filtek-Z-250; 3 o efeito, nesta resistência adesiva, do jateamento com óxido de alumínio, aplicado na base do braquete metálico, associado ou não ao sistema adesivo resinoso dentário. METODOLOGIA: para avaliar a união adesiva, especificamente na interface resina/braquete, empregou-se uma máquina universal de ensaios e o teste preconizado foi o de cisalhamento. RESULTADOS E CONCLUSÕES: após análise estatística (análise de Variância e, posteriormente, teste de Tukey e discussão dos resultados, conclui-se que: a ocorrência de 12,5% de fraturas coesivas pode ser considerada mínima, indicando que a metodologia empregada pode ser considerada confiável para avaliar especificamente a força de união da interface resina/braquete; em relação aos tipos de materiais empregados, sem nenhum tratamento prévio, as resinas compostas Concise ortodôntico, Transbond-XT e Filtek-Z-250 apresentaram valores similares de resistência adesiva sob esforços de cisalhamento; os tratamentos que incluíam a aplicação do adesivo específico, com ou sem jateamento com óxido de alumínio na base do braquete, foram mais efetivos para a resina composta Concise ortodôntico, quando comparados ao seu grupo controle; os tratamentos de jateamento com óxido de alumínio, associado ou não ao adesivo específico na base do braquete, foram mais efetivos estatisticamente para a resina composta Transbond-XT, quando comparados ao seu grupo controle; para a resina composta Filtek-Z-250, quando utilizado o adesivo Single Bond na base do braquete

  15. Análise in vitro da infiltração bacteriana na interface de pilares protéticos e implantes com plataforma cone morse

    OpenAIRE

    Anjos, Carlos Magno dos

    2009-01-01

    A existência de microfenda entre o implante e o pilar protético possibilita o acúmulo de biofilme. A presença de bactérias nesta região tem sido descrita como fator etiológico de processos inflamatórios, tendo como consequência a desorganização dos tecidos interferindo na saúde perimplantar em longo prazo. O objetivo deste estudo foi avaliar a existência de infiltração bacteriana entre implantes com plataforma Cone Morse e pilares protéticos. A amostra foi dividida em 3 grupos ...

  16. Adesão borracha-latão: a influência do cobalto, do sistema HMMM (hexametoximetilmelamina)-resorcinol e da temperatura na interface.

    OpenAIRE

    Roni Carlos Viana

    2006-01-01

    Em base a um composto de borracha padrão e cordas metálicas de aço latonadas com 64 e 68,2 % de cobre, estudou-se o efeito dos ingredientes cobalto e sistema HMMM-resorcinol, e da temperatura de vulcanização na adesão borracha-latão. As amostras foram estudadas a novo (Original), envelhecidas em Estufa, Auto Clave e Câmara Climática. Foram confeccionados compostos de borracha e caracterizados quanto as suas propriedades mecânicas, cinética de vulcanização e densidade de liga...

  17. Ergonomia na concepção de interfaces gráficas de salas de controle avançadas de reatores nucleares.

    OpenAIRE

    CARVALHO, Paulo Victor Rodrigues de; SANTOS, Isaac José Antonio Luquetti dos; TEIXEIRA, Douglas Vidal; FERRAZ, Fernando Toledo

    2007-01-01

    A ergonomia de concepção pode ser definida como a elaboração de novos produtos, processos ou sistemas informatizados, enfatizando a aplicação dos conceitos ergonômicos, seguindo os padrões ergonômicos contidos nas normas, objetivando o desenvolvimento de sistemas seguros, funcionais, adaptáveis as necessidades dos usuários, propiciando o aumento da confiabilidade operacional e da segurança na realização das tarefas. O objetivo desse trabalho é propor e aplicar uma estrutura metodológica para ...

  18. Interface induced growth and transformation of polymer-conjugated proto-crystalline phases in aluminosilicate hybrids: a multiple-quantum 23Na-23Na MAS NMR correlation spectroscopy study

    Czech Academy of Sciences Publication Activity Database

    Brus, Jiří; Kobera, Libor; Urbanová, Martina; Doušová, B.; Lhotka, M.; Koloušek, D.; Kotek, Jiří; Čuba, P.; Czernek, Jiří; Dědeček, Jiří

    2016-01-01

    Roč. 32, č. 11 (2016), s. 2787-2797 ISSN 0743-7463 R&D Projects: GA ČR(CZ) GA13-24155S; GA MŠk(CZ) LD14010; GA MŠk(CZ) LO1507 Grant - others:European Commission(XE) COST Action MP1202 HINT Institutional support: RVO:61389013 ; RVO:61388955 Keywords : aluminosilicate hybrids * hybrid geopolymers * interface Subject RIV: CD - Macromolecular Chemistry; CF - Physical ; Theoretical Chemistry (UFCH-W) Impact factor: 3.833, year: 2016

  19. Interfaces entre a política habitacional e o plano diretor participativo na metrópole Fortaleza-CE

    OpenAIRE

    Santos,Elizete de Oliveira

    2013-01-01

    A questão habitacional aparece como elemento fundamental para compreender os processos de produção, apropriação e consumo do espaço urbano, lançando luz nas relações entre a segregação socioespacial e a especulação imobiliária que presidem a estruturação das cidades brasileiras. Este trabalho propõe-se a discutir as interfaces entre o Plano Diretor Participativo de Fortaleza (PDPFor) e a Política Municipal de Habitação (PHIS), visando contribuir para a reflexão da importância da integração da...

  20. Adsorption of N-decanoyl-N-methylglucamine at the Interface Electrode−NaClO4 Solution. Comparison of Adsorption Properties of Different Surfactants

    Directory of Open Access Journals (Sweden)

    Dorota Gugała-Fekner

    2016-06-01

    Full Text Available The electrosorption behaviour of non-ionic surfactant: N-decanoyl-N-methylglucamine on mercury electrode in 1 mol dm−3 NaClO4 solution was determined. The values of the relative surface excess were determined on the basis of double layer differential capacity. A set of parameters of maximal adsorption and the constants of Frumkin, modified Flory-Huggins and virial adsorption isotherms were obtained. It was stated that the adsorption of this surfactant is determined by the adsorption energy, however here is no simple relation between a surface excess and the values of repulsive interactions parameter A. Adsorption properties of three surfactants: cationic, anionic and non-ionic were compared. This work is licensed under a Creative Commons Attribution 4.0 International License.

  1. Organic interfaces

    NARCIS (Netherlands)

    Poelman, W.A.; Tempelman, E.

    2014-01-01

    This paper deals with the consequences for product designers resulting from the replacement of traditional interfaces by responsive materials. Part 1 presents a theoretical framework regarding a new paradigm for man-machine interfacing. Part 2 provides an analysis of the opportunities offered by new

  2. Fluid Interfaces

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius

    2001-01-01

    Fluid interaction, interaction by the user with the system that causes few breakdowns, is essential to many user interfaces. We present two concrete software systems that try to support fluid interaction for different work practices. Furthermore, we present specificity, generality, and minimality...... as design goals for fluid interfaces....

  3. Entretenimento hospitalar: um novo conceito de melhoria na qualidade de vida baseada no Design de Interfaces e ambiente computacional hipermídia

    Directory of Open Access Journals (Sweden)

    Vera Maria Jubram Kalache

    2014-07-01

    Full Text Available Este projeto propõe o uso de uma ferramenta digital para pacientes internados, com o objetivo de amenizar a ansiedade e favorecer a sua recuperação. Para tanto, baseia-se no uso do Entretenimento, por meio de aplicativos fundamentados, escolhidos a partir de uma pesquisa e da análise de profissionais das áreas envolvidas. Os aplicativos são ferramentas de lazer e não devem ser confundidos com práticas terapêuticas. O presente trabalho visa à importância do bem-estar e à qualidade de vida no ambiente hospitalar. Elaborou-se uma proposta de arquitetura de dados para os aplicativos e as interfaces gráficas para cada módulo do dispositivo. As informações foram levantadas durante a observação informal em atividade de voluntariado. A partir delas, foi possível desenvolver e descrever os aspectos de design e as principais vantagens da utilização da tecnologia Tablet, além da sua funcionalidade para o Entretenimento Hospitalar. Implementou-se um módulo conceitual de aplicativo, utilizando informações do módulo de nutrição. Assim, foi possível explorar as relações entre as necessidades emocionais identificadas e as necessidades de entretenimento, lazer e socialização.

  4. Livro digital bilíngue para crianças surdas: uma análise na perspectiva do design visual de interface em tela

    Directory of Open Access Journals (Sweden)

    Camila Wohlmuth da Silva

    2014-12-01

    Full Text Available As tecnologias digitais facilitam e potencializam os mecanismos de informação e comunicação. No contexto do design do livro acessível, várias ferramentas podem ser utilizadas para auxiliar a educação de uma criança surda. Atualmente, a política de inclusão do governo brasileiro necessita de material bilíngue, língua de sinais e português, para contribuir com o processo de aprendizagem em sala de aula. No caso dos livros digitais, ainda não se estabeleceu critérios de qualidade e eficiência para utilizá-los. Assim, este estudo buscou, por meio de uma análise descritiva de dois eBooks para surdos, mostrar critérios e princípios de design visual de interface, especificamente o design de tela, que poderão contribuir para a produção de livros digitais com mais qualidade.

  5. AS PESQUISAS EM EDUCAÇÃO EM CIÊNCIAS NA INTERFACE COM A EDUCAÇÃO INDÍGENA: a abordagem qualitativa na evidência dos dados

    Directory of Open Access Journals (Sweden)

    Lúcia Helena Soares de Oliveira

    2017-12-01

    Full Text Available Este artigo apresenta resultados das pesquisas de doutoramento desenvolvidas nos programas de pós-graduação em Educação em Ciências e Matemática sobre as abordagens metodológicas que tem sustentado os estudos sobre os saberes tradicionais indígenas e o ensino de ciências naturais no processo de ensino e aprendizagem. Buscou-se analisar que tratamento metodológico poderia ser competente para enfrentar a problemática do universo de significados que envolvem uma pesquisa cultural. Visto que, é importante saber, que a opção por um tipo de enfoque depende da área de estudos à qual vai se aplicar. Assim como, determinar o tratamento metodológico que se mostre competente para enfrentar a intrincada problemática respeitando os requisitos básicos de avaliação epistêmica são fatores que devem ser priorizados pelo pesquisador. Diante dos achados, fortalece-se a certeza de que o enfoque que mais se adéqua para os estudos culturais tem ancoragem na abordagem qualitativa. Nas pesquisas analisadas verificou-se a interpretação de aspectos em profundidade numa descrição da complexidade humana detalhada. Portanto, a abordagem qualitativa permite a compreensão detalhada dos significados e das características situacionais dos sujeitos envolvidos, assim como, preocupa-se com uma realidade que não pode ser quantificado e nem reduzido à operacionalização de variáveis. Visto, a finalidade da pesquisa cientifica não está centrada tão somente na exposição de um relatório ou descrição dos dados, mas em relatar o desenvolvimento interpretativo dos dados obtidos.

  6. Microprocessor interfacing

    CERN Document Server

    Vears, R E

    2014-01-01

    Microprocessor Interfacing provides the coverage of the Business and Technician Education Council level NIII unit in Microprocessor Interfacing (syllabus U86/335). Composed of seven chapters, the book explains the foundation in microprocessor interfacing techniques in hardware and software that can be used for problem identification and solving. The book focuses on the 6502, Z80, and 6800/02 microprocessor families. The technique starts with signal conditioning, filtering, and cleaning before the signal can be processed. The signal conversion, from analog to digital or vice versa, is expl

  7. Interface Anywhere

    Data.gov (United States)

    National Aeronautics and Space Administration — Current paradigms for crew interfaces to the systems that require control are constrained by decades old technologies which require the crew to be physically near an...

  8. Manufacturing Interfaces

    NARCIS (Netherlands)

    van Houten, Frederikus J.A.M.

    1992-01-01

    The paper identifies the changing needs and requirements with respect to the interfacing of manufacturing functions. It considers the manufacturing system, its components and their relationships from the technological and logistic point of view, against the background of concurrent engineering.

  9. Autogestão e subjetividade: interfaces e desafios na visão de especialistas da ANTEAG, UNISOL e UNITRABALHO

    Directory of Open Access Journals (Sweden)

    Fernanda Mitsue Soares Onuma

    Full Text Available A Administração, em sua corrente teórica dominante, tem se prestado a transformar as empresas em espaços de propagação ideológica acerca de formas hierarquizadas de organização e gestão do trabalho. Negando esta dimensão política e ideológica da ação administrativa, a Teoria da Administração tem se tornado cúmplice dos interesses do business, educando profissionais cujas ações acabam sobrepondo o econômico ao fator humano e às questões éticas. Em contraposição a este cenário de injustiça e exploração, encontra-se a autogestão, forma de gestão não hierarquizada e democrática cuja implantação tem enfrentado muita dificuldade. Para buscar compreender os desafios que se impõem aos trabalhadores e trabalhadoras que se propõem a trabalhar de maneira autogestionária, foram realizadas entrevistas semi-estruturadas com um especialista em cada uma das três seguintes entidades de fomento a organizações autogestionárias: ANTEAG, UNISOL e UNITRABALHO. Os dados foram analisados por meio do método de análise de conteúdo e indicaram que a autogestão, na visão destes profissionais, implica necessidade de uma mudança de subjetividade desses trabalhadores e trabalhadoras, acostumados ao modelo de trabalho hierarquizado e não democrático. Com base nisso, argumenta-se que, para uma melhor compreensão da dificuldade de implantação da autogestão nas organizações, é necessária a adoção de um conceito de subjetividade que englobe não só o seu caráter individual, mas também seu caráter coletivo. Conquanto a visão da subjetividade individual e coletiva nos leve a refletir sobre o fato de que os desafios da prática da autogestão são mais profundos do que aparentam inicialmente, acreditamos que sua resolução pode estar mais próxima de nós do que imaginamos.

  10. Effect of adsorption of Pb(II) and Cd(II) ions in the presence of EDTA on the characteristics of electrical double layers at the ion exchanger/NaCl electrolyte solution interface.

    Science.gov (United States)

    Kołodyńska, Dorota; Skwarek, Ewa; Hubicki, Zbigniew; Janusz, Władysław

    2009-05-15

    The main propose of this work was to describe the basic parameters of electrical double layer structures of the ion exchanger/NaCl before and after the sorption process of Pb(II) and Cd(II) ions from aqueous solutions in the presence of the complexing agent EDTA (ethylenediaminetetraacetic acid). In the studies the following ion exchangers were used: cation exchangers Micro-ionex (in the H(+) and NH(+)(4) forms), Dowex 50W x 4 (in the H(+) form), and Dowex 50W x 12 (in the H(+) form); anion exchangers Dowex 1 x 4 (in the Cl(-) form) and Dowex 1 x 8 (in the Cl(-) form). Study of the physicochemical properties of the sample surface was carried out. The influence of ionic strength, pH, and solution interface was investigated. Electrophoretic mobility, surface charge density, and parameters for different concentrations of the electrolytes under question were presented. pH was changed from 3 to 10. The studies were carried out for the M(II)-EDTA = 1:1 system. The effects of the concentration of the solution containing the above-noted complexes and of the ion exchange/solution phase contact time on sorption capacities of the ion exchangers under consideration were studied. Kinetic parameters of the sorption process were also determined.

  11. Designing Interfaces

    CERN Document Server

    Tidwell, Jenifer

    2010-01-01

    Despite all of the UI toolkits available today, it's still not easy to design good application interfaces. This bestselling book is one of the few reliable sources to help you navigate through the maze of design options. By capturing UI best practices and reusable ideas as design patterns, Designing Interfaces provides solutions to common design problems that you can tailor to the situation at hand. This updated edition includes patterns for mobile apps and social media, as well as web applications and desktop software. Each pattern contains full-color examples and practical design advice th

  12. Interface Realisms

    DEFF Research Database (Denmark)

    Pold, Søren

    2005-01-01

    to the development of illusionistic realism within computer graphics and games. The article compares the pragmatic realism of HCI with aesthetic notions of realism in the computer game Max Payne (illusionistic realism), the artist Jodi's game modifications (media realism), and Adrian Ward's software art work......This article argues for seeing the interface as an important representational and aesthetic form with implications for postmodern culture and digital aesthetics. The interface emphasizes realism due in part to the desire for transparency in Human-Computer Interaction (HCI) and partly...

  13. Normas e reflexividade no lócus da produção do conhecimento: Interfaces entre o social e o científico na pesquisa e no jornalismo

    Directory of Open Access Journals (Sweden)

    Sayonara Leal

    2017-01-01

    Full Text Available Este texto trata da coordenação entre normas, reflexividade e práticas incorporadas em dispositivos organizacionais que moldam rotinas de produção intelectual, tanto na atividade científica, como no jornalismo. Interessamo-nos pela relação entre referências normativas do trabalho intelectual de pesquisadores e jornalistas e suas investigações como uma decorrência da interface entre fatores internos e externos que moldam a organização e produção de saberes configurando novas formas de construção de conhecimento (ciência, cultura, informações. No caso do jornalismo concordamos que este pode ser compreendido como um conhecimento que se origina das chamadas “mesoepistemologias” enquanto maneiras de conhecer que surgem na interface entre polos científico e grande público. Trata-se da concepção de saberes ancorada em uma cientificidade própria. Embora reconheçamos que há tanto na atividade científica como na jornalística a participação da objetividade, imparcialidade e neutralidade como valores positivistas que norteiam a produção de conteúdos cognitivos nesses ambientes normativos os quais devem ser problematizados em função de operações subjetivas e intencionais que se manifestam entre cientistas e jornalistas enquanto produtores culturais e do envolvimento de epistemologias populares como coprodutoras desses conteúdos. O problema da definição do lócus onde a ciência é concebida, justificada e legitimada é tema caro para sociologia do conhecimento que tem apresentado abordagens distintas para lidar com a questão dos elementos internos e externos ou de sua interseção, o social e o científico, na definição desse lugar. Temos como objetivo apresentar uma reflexão pautada na sociologia pragmática da crítica e na sociologia construtivista da inovação para discutir como normas institucionalizadas, orientadas pela razão técnica e científica e normas negociadas sob o registro da metapragm

  14. Interface unit

    NARCIS (Netherlands)

    Keyson, D.V.; Freudenthal, A.; De Hoogh, M.P.A.; Dekoven, E.A.M.

    2001-01-01

    The invention relates to an interface unit comprising at least a display unit for communication with a user, which is designed for being coupled with a control unit for at least one or more parameters in a living or working environment, such as the temperature setting in a house, which control unit

  15. Linguística de Corpus e as Novas Tecnologias de Informação e Comunicação (ICTs: uma interface necessária na formação do professor de Língua Inglesa sob uma perspectiva crítica, social e educacional

    Directory of Open Access Journals (Sweden)

    Cristina Arcuri Eluf Kindermann

    2011-02-01

    Full Text Available Este artigo visa investigar a inserção da Linguística de Corpus (LC dentro de práticas educacionais na formação de professores de Língua Inglesa em uma universidade particular de São Paulo. Objetivamos, por meio de reflexões críticas e socioculturais, estabelecer um design de interface entre a LC e as novas tecnologias de informação e comunicação (ICTs na atualidade.

  16. Interface learning

    DEFF Research Database (Denmark)

    Thorhauge, Sally

    2014-01-01

    professionals experience as a result of their collaboration. The dissertation demonstrates how a given partnership’s collaboration affects the students’ learning experiences when they are doing the coursework. The dissertation presents findings that museum-school partnerships can use in order to develop......"Interface learning - New goals for museum and upper secondary school collaboration" investigates and analyzes the learning that takes place when museums and upper secondary schools in Denmark work together in local partnerships to develop and carry out school-related, museum-based coursework...... for students. The research focuses on the learning that the students experience in the interface of the two learning environments: The formal learning environment of the upper secondary school and the informal learning environment of the museum. Focus is also on the learning that the teachers and museum...

  17. Museets interface

    DEFF Research Database (Denmark)

    Pold, Søren

    2007-01-01

    Søren Pold gør sig overvejelser med udgangspunkt i museumsprojekterne Kongedragter.dk og Stigombord.dk. Han argumenterer for, at udviklingen af internettets interfaces skaber nye måder at se, forstå og interagere med kulturen på. Brugerne får nye medievaner og perceptionsmønstre, der må medtænkes...

  18. Influência das energias de superfícies e interfaces na densificação durante a sinterização: um modelo geométrico The influence of surface and interface energies during sintering: a geometric approach

    Directory of Open Access Journals (Sweden)

    D. Gouvêa

    2004-06-01

    Full Text Available Devido a grande importância dada aos processos difusionais na sinterização, ou seja, a fatores cinéticos, pouco tem evoluído o conhecimento da sinterização no estado sólido do ponto de vista da energia do sistema de partículas. Alguns pesquisadores têm se esforçado em compreender a importância das energias da superfície dos poros e da interface do contorno de grão no processo de densificação e sua relação com os processos difusionais e a termodinâmica da sinterização. Contudo, pouco avanço tem sido obtido nesse sentido. O presente trabalho foi desenvolvido sobre um modelo geométrico simples de empacotamento de esferas sobre o qual foram realizados cálculos para se avaliar as variações de densidade, área específica dos poros e dos contornos de grão durante três situações: densificação sem crescimento de grãos, crescimento de grãos sem densificação e crescimento de grãos e densificação. Os resultados sugerem existir uma relação entre a evolução da microestrutura para a densificação ou não de um sistema de partículas em função da razão entre as energias do contorno de grão e da superfície dos poros.Sintering is a diffusional process and the mechanism of mass transport is assumed to control the phenomenon. Minor attention has been paid on the influence of surface and interface energies during sintering. Even if some works have tried to understand the influence of the modifications of the pore and grain boundary surfaces in the densification during sintering and their relationships with the difusional process, modest progresses have been reached. This work was developed from a simple model of packing spheres, allowing for calculating simultaneously the variation of pore, grain boundary and density for three situations: densification without grain growth, grain growth without densification and grain growth with densification. The results suggest a relationship between the microestrutural evolution

  19. Soft Interfaces

    International Nuclear Information System (INIS)

    Strzalkowski, Ireneusz

    1997-01-01

    This book presents an extended form of the 1994 Dirac Memorial Lecture delivered by Pierre Gilles de Gennes at Cambridge University. The main task of the presentation is to show the beauty and richness of structural forms and phenomena which are observed at soft interfaces between two media. They are much more complex than forms and phenomena existing in each phase separately. Problems are discussed including both traditional, classical techniques, such as the contact angle in static and dynamic partial wetting, as well as the latest research methodology, like 'environmental' scanning electron microscopes. The book is not a systematic lecture on phenomena but it can be considered as a compact set of essays on topics which particularly fascinate the author. The continuum theory widely used in the book is based on a deep molecular approach. The author is particularly interested in a broad-minded rheology of liquid systems at interfaces with specific emphasis on polymer melts. To study this, the author has developed a special methodology called anemometry near walls. The second main topic presented in the book is the problem of adhesion. Molecular processes, energy transformations and electrostatic interaction are included in an interesting discussion of the many aspects of the principles of adhesion. The third topic concerns welding between two polymer surfaces, such as A/A and A/B interfaces. Of great worth is the presentation of various unsolved, open problems. The kind of topics and brevity of description indicate that this book is intended for a well prepared reader. However, for any reader it will present an interesting picture of how many mysterious processes are acting in the surrounding world and how these phenomena are perceived by a Nobel Laureate, who won that prize mainly for his investigations in this field. (book review)

  20. Interface Screenings

    DEFF Research Database (Denmark)

    Thomsen, Bodil Marie Stavning

    2015-01-01

    In Wim Wenders' film Until the End of the World (1991), three different diagrams for the visual integration of bodies are presented: 1) GPS tracking and mapping in a landscape, 2) video recordings layered with the memory perception of these recordings, and 3) data-created images from dreams...... and memories. From a transvisual perspective, the question is whether or not these (by now realized) diagrammatic modes involving the body in ubiquitous global media can be analysed in terms of the affects and events created in concrete interfaces. The examples used are filmic as felt sensations...

  1. Human work in the interface of the liberal and social states and the reflections of its valorization in the 1988 Constitution O trabalho humano na interface dos estados liberal e social e o desdobramento de sua valorização na Constituição de 1988

    Directory of Open Access Journals (Sweden)

    Sharon Cristine Ferreira de Souza

    2009-12-01

    Full Text Available This work focuses on the conception of work from the Critical Social Theory by Jürgen Habermas, highlighting its importance in the process of self-constitution of the human societies. In the general level of analysis, this study observes the effects of the modern State, emphasizing the configuration of the Liberal and Interventionist States. Regarding the latter, mainly after the liberalism crisis in the first half of the last century, this work seeks to highlight the role of the State intervention in the economic domain, directing the discussion to the ambit of the Brazilian Constitutions, particularly the 1988 Constitution, Art. 170, in the light of the valorization of the human work.Ressalta-se a concepção de trabalho a partir da Teoria Social Crítica de Jürgen Habermas, destacando a importância do mesmo no processo de autoconstituição das sociedades humanas. Ainda no plano geral da análise, acompanha-se o desdobramento do Estado moderno, enfatizando a configuração dos Estados Liberal e Intervencionista. Nesse último, sobretudo, após a crise do liberalismo na primeira metade do século passado, busca-se realçar o papel de intervenção do Estado no domínio econômico, trazendo a discussão para o âmbito das Constituições brasileiras, com destaque especial à Constituição de 1988, no seu Art. 170, à luz da valorização do trabalho humano.

  2. Investigating the effect of multiple grain–grain interfaces on electric and magnetic properties of [50 wt% BaFe{sub 12}O{sub 19}–50 wt% Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}] composite system

    Energy Technology Data Exchange (ETDEWEB)

    Pattanayak, Ranjit, E-mail: ranjit.p20@gmail.com [Department of Physics and Astronomy, National Institute of Technology, Rourkela 769008 (India); Muduli, Rakesh; Panda, Ranjit Kumar [Department of Physics and Astronomy, National Institute of Technology, Rourkela 769008 (India); Dash, Tapan [CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha (India); Sahu, Priyanka; Raut, Subhajit; Panigrahi, Simanchala [Department of Physics and Astronomy, National Institute of Technology, Rourkela 769008 (India)

    2016-03-15

    This report presents the fabrication, electrical properties along with the magnetic parameters of a composite system considering a strong ferrimagnetic (BaFe{sub 12}O{sub 19}) and a ferroelectric (Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}) material. Polycrystalline 50 wt% BaFe{sub 12}O{sub 19} (BaM)–50 wt% Na{sub 0.5}Bi{sub 0.5}TiO{sub 3} (NBT) composite system was prepared by the solid state reaction method. Rietveld refinement of XRD pattern confirms the presence of BaM and NBT phases without any impurity phase. From scanning electron micrograph both the phases are also clearly identified. In this report, the electric relaxation and conductivity properties were systematically investigated and analyzed in the frequency range of 100 Hz to 1 MHz and temperature range of 30–200 °C. The presence of different type of grains and significant reduction in the resistance of the composite system were found to be responsible for the nature of electric relaxation behavior. A peculiar and interesting evolution of grain boundary conduction was detected which was argued due to the existence of three possible grain boundaries such as: (i) BaM–BaM interface, (ii) NBT–NBT interface and (iii) BaM–NBT interface. The magnetization study (M–H loop) paves that, the saturation magnetization and coercive field reduces for composite system.

  3. Interface-Based Design

    National Research Council Canada - National Science Library

    de Alfaro, Luca; Henzinger, Thomas A

    2004-01-01

    .... Interface automata support incremental design and independent implementability. Incremental design means that the compatibility checking of interfaces can proceed for partial system descriptions, without knowing the interfaces of all components...

  4. Towards High-Performance Aqueous Sodium-Ion Batteries: Stabilizing the Solid/Liquid Interface for NASICON-Type Na2 VTi(PO4 )3 using Concentrated Electrolytes.

    Science.gov (United States)

    Zhang, Huang; Jeong, Sangsik; Qin, Bingsheng; Vieira Carvalho, Diogo; Buchholz, Daniel; Passerini, Stefano

    2018-02-22

    Aqueous Na-ion batteries may offer a solution to the cost and safety issues of high-energy batteries. However, substantial challenges remain in the development of electrode materials and electrolytes enabling high performance and long cycle life. Herein, we report the characterization of a symmetric Na-ion battery with a NASICON-type Na 2 VTi(PO 4 ) 3 electrode material in conventional aqueous and "water-in-salt" electrolytes. Extremely stable cycling performance for 1000 cycles at a high rate (20 C) is found with the highly concentrated aqueous electrolytes owing to the formation of a resistive but protective interphase between the electrode and electrolyte. These results provide important insight for the development of aqueous Na-ion batteries with stable long-term cycling performance for large-scale energy storage. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Interfaces educação especial e fonoaudiologia: um estudo bibliométrico baseado na produção científica de dissertações e teses

    OpenAIRE

    Suzelei Faria Bello

    2009-01-01

    A Fonoaudiologia e a Educação Especial estabelecem relações de proximidade por possuírem objetos de estudos semelhantes, além de que o trabalho integrado entre os profissionais maximiza possibilidades de crescimento para ambas as áreas de conhecimento. Nesta perspectiva, o objetivo geral proposto nesta pesquisa encontra-se em compreender como a Fonoaudiologia foi tomada como objeto de pesquisa na Educação Especial com base na análise da produção científica de dissertações e teses do Progra...

  6. Interface Simulation Distances

    Directory of Open Access Journals (Sweden)

    Pavol Černý

    2012-10-01

    Full Text Available The classical (boolean notion of refinement for behavioral interfaces of system components is the alternating refinement preorder. In this paper, we define a distance for interfaces, called interface simulation distance. It makes the alternating refinement preorder quantitative by, intuitively, tolerating errors (while counting them in the alternating simulation game. We show that the interface simulation distance satisfies the triangle inequality, that the distance between two interfaces does not increase under parallel composition with a third interface, and that the distance between two interfaces can be bounded from above and below by distances between abstractions of the two interfaces. We illustrate the framework, and the properties of the distances under composition of interfaces, with two case studies.

  7. Shape-changing interfaces:

    DEFF Research Database (Denmark)

    Rasmussen, Majken Kirkegård; Pedersen, Esben Warming; Petersen, Marianne Graves

    2015-01-01

    Shape change is increasingly used in physical user interfaces, both as input and output. Yet, the progress made and the key research questions for shape-changing interfaces are rarely analyzed systematically. We review a sample of existing work on shape-changing interfaces to address these shortc......Shape change is increasingly used in physical user interfaces, both as input and output. Yet, the progress made and the key research questions for shape-changing interfaces are rarely analyzed systematically. We review a sample of existing work on shape-changing interfaces to address...... shape-changing interfaces be used for, (b) which parts of the design space are not well understood, and (c) why studying user experience with shape-changing interfaces is important....

  8. Microcomputer interfacing and applications

    CERN Document Server

    Mustafa, M A

    1990-01-01

    This is the applications guide to interfacing microcomputers. It offers practical non-mathematical solutions to interfacing problems in many applications including data acquisition and control. Emphasis is given to the definition of the objectives of the interface, then comparing possible solutions and producing the best interface for every situation. Dr Mustafa A Mustafa is a senior designer of control equipment and has written many technical articles and papers on the subject of computers and their application to control engineering.

  9. Garbage collector interface

    OpenAIRE

    Ive, Anders; Blomdell, Anders; Ekman, Torbjörn; Henriksson, Roger; Nilsson, Anders; Nilsson, Klas; Robertz, Sven

    2002-01-01

    The purpose of the presented garbage collector interface is to provide a universal interface for many different implementations of garbage collectors. This is to simplify the integration and exchange of garbage collectors, but also to support incremental, non-conservative, and thread safe implementations. Due to the complexity of the interface, it is aimed at code generators and preprocessors. Experiences from ongoing implementations indicate that the garbage collector interface successfully ...

  10. Water at Interfaces

    DEFF Research Database (Denmark)

    Björneholm, Olle; Hansen, Martin Hangaard; Hodgson, Andrew

    2016-01-01

    The interfaces of neat water and aqueous solutions play a prominent role in many technological processes and in the environment. Examples of aqueous interfaces are ultrathin water films that cover most hydrophilic surfaces under ambient relative humidities, the liquid/solid interface which drives...

  11. User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms; Myers, Brad A

    2008-01-01

    User Interfaces have been around as long as computers have existed, even well before the field of Human-Computer Interaction was established. Over the years, some papers on the history of Human-Computer Interaction and User Interfaces have appeared, primarily focusing on the graphical interface era...

  12. Interface do processamento de materiais na central de material e esterilização e a segurança do paciente em um hospital do sul do país

    OpenAIRE

    Carvalho Junior, Danton Carlos de

    2012-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Ciências da Saúde. Programa de Pós-Graduação em Gestão do Cuidado em Enfermagem O conhecimento sobre o processamento de materiais na Central de Material e Esterilização e de suas etapas é essencial para segurança do paciente, pois através do cuidado indireto prestado pelos seus profissionais é possível diminuir riscos e eventos adversos além de colaborar para o controle da infecção hospitalar. Sendo assim, a minha v...

  13. Quantization of interface currents

    Energy Technology Data Exchange (ETDEWEB)

    Kotani, Motoko [AIMR, Tohoku University, Sendai (Japan); Schulz-Baldes, Hermann [Department Mathematik, Universität Erlangen-Nürnberg, Erlangen (Germany); Villegas-Blas, Carlos [Instituto de Matematicas, Cuernavaca, UNAM, Cuernavaca (Mexico)

    2014-12-15

    At the interface of two two-dimensional quantum systems, there may exist interface currents similar to edge currents in quantum Hall systems. It is proved that these interface currents are macroscopically quantized by an integer that is given by the difference of the Chern numbers of the two systems. It is also argued that at the interface between two time-reversal invariant systems with half-integer spin, one of which is trivial and the other non-trivial, there are dissipationless spin-polarized interface currents.

  14. Análise das Dissertações e Teses do PPGEES/UFSCar na Interface Educação Física e Educação Especial

    OpenAIRE

    Mahl,Eliane; Munster,Mey de Abreu van

    2015-01-01

    A interface entre as áreas de Educação Física e de Educação Especial permite multiplicar as possibilidades de intervenção e investigação relacionadas às condições de acesso a cultura corporal, a inclusão social e escolar de pessoas com necessidades educacionais especiais. A intersecção da produção do conhecimento entre Educação Física e Educação Especial tem sido evidenciada, sobretudo, nas pesquisas realizadas nos Programas de Pós-Graduação. Buscando mapear o que tem sido produzido nas respe...

  15. Espaço e interdisciplinaridade: o conceito de espaço na obra de Milton Santos e suas interfaces com a comunicação e a semiótica

    Directory of Open Access Journals (Sweden)

    Regiane Miranda de Oliveira Nakagawa

    2016-12-01

    Full Text Available Esta entrevista com Lucrécia D’Alessio Ferrara e Maria Adélia Aparecida de Souza foi realizada por ocasião do Seminário Internacional “Diálogos com as ideias de Milton Santos – 15 anos de ausência”, ocorrido no Instituto de Geociências da UFBA. A conversa aborda o pensamento do geógrafo e sua relação com diferentes áreas do conhecimento, como também indica uma série de desafios para a construção do conhecimento na contemporaneidade. Dentre eles, destaca-se a relação entre a disciplinaridade e a interdisciplinaridade, a questão do método e da metodologia e a diferença entre índice e rastro científico.

  16. Microconical interface fitting and interface grasping tool

    Science.gov (United States)

    Gernhardt, Michael L. (Inventor); Wightman, William D. (Inventor); Johnston, Alistair P. (Inventor)

    1994-01-01

    A small and light weight microconical interface fitting may be attached to the surface of a space vehicle or equipment to provide an attachment device for an astronaut or robot to capture the space vehicle or equipment. The microconical interface fitting of the present invention has an axisymmetrical conical body having a base portion with a torque reaction surface for preventing rotation of the interface grasping tool; a cavitated, sunken or hollowed out intermediate locking portion which has a cavity shaped for receiving the latches of the grasping tool and an upper guiding portion for guiding the grasping tool into axial alignment with the microconical interface fitting. The capture is accomplished with an interface grasping tool. The grasping tool comprises an outer sleeve with a handle attached, an inner sleeve which may be raised and lowered within the outer sleeve with a plurality of latches supported at the lower end and a cam to raise and lower the inner sleeve. When the inner sleeve is at its lowest position, the latches form the largest diameter opening for surrounding the microconical fitting and the latches form the smallest diameter or a locking, grasping position when raised to the highest position within the outer sleeve. The inner sleeve may be at an intermediate, capture position which permits the latches to be biased outwardly when contacting the microconical fitting under very low forces to grasp the fitting and permits capture (soft docking) without exact alignment of the fitting and the tool.

  17. As Interfaces da Política de Ciência, Tecnologia e Inovação Com a Política Industrial: Dilemas na Trajetória Recente do Brasil

    Directory of Open Access Journals (Sweden)

    Christian Luiz da Silva

    2015-01-01

    Full Text Available The objective of this paper is to discuss the interfaces between Political Science, Technology and Innovation and Industrial Policy, dealing with their dilemmas from its historical trajectory in Brazil. The method of this research is characterized by being predominantly qualitative and literature. Has biblio - graphical therefore intends to investigate the trajectory and dynamics of ST & I Policy and Industrial Policy in Brazil using technical procedures such as literature , content analysis and understanding of the documentary for related topics. The originality of the work is centered on developing a line of argument about the role of articulation of these two policies from the root of its functions: the role for the construction of a policy to support a process of national development. Thus, it allows you to question that technology and innovation system model structure and is intended to be a critical basis for assessing national plans for science, technology and innovation (ST & I as well as industrial policy . The ST & I policies and industrial 2000 onwards were based on existing priority sectors, but not necessarily essential for the construction of a new technological standard and innovation. This pattern itself demands articulated discussion between different actors, different changes in policies in periods as short (3 policies in less than 10 years. This result in a sustained incremental innovation system and disjointed policies revisited every governmental interest and not the State, in the conception of the term.

  18. Universal computer interfaces

    CERN Document Server

    Dheere, RFBM

    1988-01-01

    Presents a survey of the latest developments in the field of the universal computer interface, resulting from a study of the world patent literature. Illustrating the state of the art today, the book ranges from basic interface structure, through parameters and common characteristics, to the most important industrial bus realizations. Recent technical enhancements are also included, with special emphasis devoted to the universal interface adapter circuit. Comprehensively indexed.

  19. Coleção fluídica na interface do LASIK causada por glaucoma secundário à ceratouveíte herpética: relato de caso LASIK interface fluid accumulation caused by glaucoma associated with herpetic keratouveitis: case report

    Directory of Open Access Journals (Sweden)

    Eliane Mayumi Nakano

    2007-02-01

    Full Text Available A infecção por Herpes simplex vírus (HSV é causa freqüente de inflamação intra-ocular ou uveíte anterior. A hipertensão ocular é característica comumente observada nas ceratouveítes herpéticas. Neste relato descrevemos o acúmulo de fluido e descolamento do "flap" corneano da ceratomileusis, no pós-operatório tardio de LASIK (28 meses, associado a quadro hipertensivo ocular secundário a ceratouveíte herpética. Este achado corrobora a suposição que a cicatrização corneana após LASIK seja apenas parcial e o espaço virtual produzido pela ceratomileuisis permaneça indefinidamente. Condições de aumento excessivo da pressão intra-ocular podem causar edema corneano com acúmulo de fluido da interface.Herpes simplex virus infection is a frequent cause of intraocular inflammation or anterior uveitis. Ocular hypertension is a common feature in herpetic keratouveitis. We describe a fluid accumulation and flap displacement in late postoperative period (28 months of LASIK associated with ocular hypertension caused by herpetic keratouveitis. This finding supports the theory that flap attachment after LASIK is only partial and the virtual space remains indefinitely. The presence of ocular hypertension may lead to corneal edema and fluid accumulation in the interface.

  20. Electromagnetic Interface Testing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Electromagnetic Interface Testing facilitysupports such testing asEmissions, Field Strength, Mode Stirring, EMP Pulser, 4 Probe Monitoring/Leveling System, and...

  1. A interface entre o trabalho do agente comunitário de saúde e do fisioterapeuta na atenção básica à saúde Interface between the work of the community health agent and physiotherapist in the basic health care

    Directory of Open Access Journals (Sweden)

    Liliany Fontes Loures

    2010-07-01

    Full Text Available O estudo tem o objetivo de identificar as ações do fisioterapeuta e do agente comunitário de saúde na perspectiva da integração de suas atuações na atenção básica à saúde. Realizou-se uma revisão sistemática com o propósito de conhecer quais são essas atuações e, posteriormente, relacioná-las. O interesse surgiu durante o "Estágio Supervisionado em Atenção Primária à Saúde" e da observação de suas atuações. A partir da revisão de legislações e de trabalhos científicos atualizados acerca do assunto, verificou-se que tanto o agente comunitário de saúde quanto o fisioterapeuta são profissionais importantes na composição de uma equipe de saúde, pois contribuem à qualificação das ações de saúde junto à comunidade e à efetividade de um sistema de saúde universal, integral e equitativo. Ao final, constatou-se que há uma interação entre esses profissionais e uma integração entre suas atividades.The study is intended to identify the actions of the physiotherapist and community health agent in the context of the integration of their performances in the basic health care. A systematic review was performed with the purpose of knowing what are these performances, and then list them. The interest came from the "Supervised Training in the Primary Health Care" and the observation of their acts. From a law review and updated scientific works related to this subject, we noted that both, community health agent and physiotherapist, are important professionals in the composition of a health team, once they contribute to the qualification of the health actions among the community and the effectiveness of an universal, integral and equitable health system. Lastly we found that there is an interaction between these professionals and integration among their activities.

  2. Solar wind stream interfaces

    International Nuclear Information System (INIS)

    Gosling, J.T.; Asbridge, J.R.; Bame, S.J.; Feldman, W.C.

    1978-01-01

    Measurements aboard Imp 6, 7, and 8 reveal that approximately one third of all high-speed solar wind streams observed at 1 AU contain a sharp boundary (of thickness less than approx.4 x 10 4 km) near their leading edge, called a stream interface, which separates plasma of distinctly different properties and origins. Identified as discontinuities across which the density drops abruptly, the proton temperature increases abruptly, and the speed rises, stream interfaces are remarkably similar in character from one stream to the next. A superposed epoch analysis of plasma data has been performed for 23 discontinuous stream interfaces observed during the interval March 1971 through August 1974. Among the results of this analysis are the following: (1) a stream interface separates what was originally thick (i.e., dense) slow gas from what was originally thin (i.e., rare) fast gas; (2) the interface is the site of a discontinuous shear in the solar wind flow in a frame of reference corotating with the sun; (3) stream interfaces occur at speeds less than 450 km s - 1 and close to or at the maximum of the pressure ridge at the leading edges of high-speed streams; (4) a discontinuous rise by approx.40% in electron temperature occurs at the interface; and (5) discontinuous changes (usually rises) in alpha particle abundance and flow speed relative to the protons occur at the interface. Stream interfaces do not generally recur on successive solar rotations, even though the streams in which they are embedded often do. At distances beyond several astronomical units, stream interfaces should be bounded by forward-reverse shock pairs; three of four reverse shocks observed at 1 AU during 1971--1974 were preceded within approx.1 day by stream interfaces. Our observations suggest that many streams close to the sun are bounded on all sides by large radial velocity shears separating rapidly expanding plasma from more slowly expanding plasma

  3. Transformation of Thematic Cartography Domain Ontology into Java Interfaces and Clasess / Transformace Doménové Ontologie Tematické Kartografie Na Java Rozhraní A Třídy

    Directory of Open Access Journals (Sweden)

    Peňáz Tomáš

    2011-12-01

    Full Text Available Článek pojednává o transformaci experimentální znalostní ontologie, soustřeďující vybrané deklarativní kartografické znalosti pro doménu tematické kartografie, na třídy a rozhraní jazyka Java. Důvodem transformace je přenos deklarativních znalostí z oblasti tematické kartografie, do podoby programového kódu v jazyce Java. Vzniklý programový kód, obsahující deklarace rozhraní a tříd, bude dále využit pro tvorbu programové aplikace inteligentního systému pro interaktivní podporu tvorby tematických map. Připravovaný pilotní projekt tohoto znalostního systému je určen pro uživatele bez potřebných kartografických znalostí, kterým umožní interaktivně vytvářet tematické mapy a poskytne jim při tom podporu. Smyslem využití takového nástroje je zamezit uživateli odchýlení od zavedených kartografických pravidel a zabránit vzniku hrubých chyb ve výsledné mapě.

  4. Icinga Monitoring System Interface

    CERN Document Server

    Neculae, Alina Georgiana

    2014-01-01

    The aim of this project is to develop a web interface that would be used by the Icinga monitoring system to manage the CMS online cluster, in the experimental site. The interface would allow users to visualize the information in a compressed and intuitive way, as well as modify the information of each individual object and edit the relationships between classes.

  5. Interface colloidal robotic manipulator

    Science.gov (United States)

    Aronson, Igor; Snezhko, Oleksiy

    2015-08-04

    A magnetic colloidal system confined at the interface between two immiscible liquids and energized by an alternating magnetic field dynamically self-assembles into localized asters and arrays of asters. The colloidal system exhibits locomotion and shape change. By controlling a small external magnetic field applied parallel to the interface, structures can capture, transport, and position target particles.

  6. Interface, a dispersed architecture

    NARCIS (Netherlands)

    Vissers, C.A.

    1976-01-01

    Past and current specification techniques use timing diagrams and written text to describe the phenomenology of an interface. This paper treats an interface as the architecture of a number of processes, which are dispersed over the related system parts and the message path. This approach yields a

  7. Verden som interface

    DEFF Research Database (Denmark)

    2007-01-01

    Oversættelse af Peter Weibels tekst "The World as Interface" i Passepartout # 27. Interfacekulturens æstetik. Udgivelsesdato: 28.04.07......Oversættelse af Peter Weibels tekst "The World as Interface" i Passepartout # 27. Interfacekulturens æstetik. Udgivelsesdato: 28.04.07...

  8. Interface or Interlace?

    DEFF Research Database (Denmark)

    Hansen, Lone Koefoed; Wamberg, Jacob

    2005-01-01

    Departing from an analysis of the computer's indeterminate location between medium and machine, this paper problematises the idea of a clear-cut interface in complex computing, especially Augmented Reality. The idea and pratice of the interface is derived from the medium as a representational...

  9. Interfaces in evolutionary games

    Science.gov (United States)

    Kolotev, Sergei; Malyutin, Aleksandr; Burovski, Evgeni; Shchur, Lev

    2018-01-01

    We investigate geometrical aspects of a spatial evolutionary game. The game is based on the Prisoner’s dilemma. We analyze the geometrical structure of the space distribution of cooperators and defectors in the steady-state regime of evolution. We develop algorithm for the identification of the interfaces between clusters of cooperators and defectors, and measure fractal properties of the interfaces.

  10. User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms; Myers, Brad A

    2008-01-01

    User Interfaces have been around as long as computers have existed, even well before the field of Human-Computer Interaction was established. Over the years, some papers on the history of Human-Computer Interaction and User Interfaces have appeared, primarily focusing on the graphical interface era...... and early visionaries such as Bush, Engelbart and Kay. With the User Interface being a decisive factor in the proliferation of computers in society and since it has become a cultural phenomenon, it is time to paint a more comprehensive picture of its history. This SIG will investigate the possibilities...... of  launching a concerted effort towards creating a History of User Interfaces. ...

  11. Effects of low-intensity GaAlAs laser radiation ({lambda}=660 nm) on dentine-pulp interface after class I cavity preparation; Efeitos da radiacao laser GaAlAs ({lambda}=660 nm) em baixa intensidade na interface dentina-polpa pos-preparo cavitario classe 1

    Energy Technology Data Exchange (ETDEWEB)

    Godoy, Bruno Miranda

    2003-07-01

    The aim of this study was to investigate the effects of low-intensity irradiation with GaAlAs laser (red emission) on the ultrastructure of dentine-pulp interface after conventionally prepared class I cavity preparation. Two patients with 8 premolars for extraction indicated for orthodontic reasons. Class I cavities were prepared in these teeth that were then divided into two groups. The first group received a treatment with laser with continuous emission, {lambda}=660 nm, with maximum power output of 30 mW. The dosimetry applied was of approximately 2J/cm{sup 2}, directly and perpendicularly into the cavity in only one section. After the irradiation, the cavities were filled with composite resin. The second group received the same treatment, except by the laser therapy. Twenty-eight days after the preparation, the teeth were extracted and were processed for transmission electron microscopy analysis. Two sound teeth, without any preparation, were also studied. The irradiated group presented odontoblastic processes in higher contact with the extracellular matrix and the collagen fibers appeared more aggregated and organized than those of control group. These results were also observed in the healthy-teeth. Thus, we suggest that laser irradiation accelerates the recovery of the dental structures involved in the cavity preparation at the pre-dentine level. (author)

  12. Guia de tomada de decisão em cardiopatias congênitas em página Web na Internet: modelo Atresia Tricúspide Guidelines to decision - making in congenital heart disease on the WEB interface: Tricuspid Atresia model

    Directory of Open Access Journals (Sweden)

    Ruy Guilherme Rodrigues CAL

    1999-04-01

    Full Text Available Estimulada pelo desafio de gerenciar toda a informação envolvida na formação do conhecimento na área de saúde, a Informática Médica desenvolveu-se em larga escala em todos os países. O recente sucesso da rede Internet como veículo de distribuição de informação incentiva a elaboração de programas médicos para utilização através dessa rede. A elaboração de um programa de apoio à decisão - para cardiopatias congênitas em forma de documento em hipertexto de World-Wide Web - apresentado pela Internet possibilitaria o aproveitamento das características de processamento e armazenamento distribuído dessa rede. Este projeto teve como objetivos: criar um modelo de guia de tomada de decisão em cirurgia cardíaca pediátrica usando como base a Atresia Tricúspide; avaliar o grau de complexidade da criação deste modelo e os benefícios pelo emprego de interface em página WEB; testar sua validação com os casos de 16 pacientes tratados na Universidade Federal de São Paulo, no período de 1980 a março de 1997. Com a utilização de hardware adequado e da linguagem de programação HTML, o programa foi desenvolvido com a utilização de 7 telas de fluxograma, conjunto de textos e 37 ilustrações. Durante a elaboração deste modelo foi possível constatar a possibilidade de fácil desenvolvimento e rápida atualização. O resultado da validação mostrou concordância significativa (91,66% com as indicações cirúrgicas realizadas pelos especialistas, na Universidade Federal de São Paulo.Stimulated by the challenge of updating and organizing all the information acquired in the health field, computer medicine has developed on a wide global scale. The recent success of the Internet for distribution of information has created a need for the production and distribution of medical programs for use via this network. The creation of a decision-making program through the World Wide Web for congenital heart diseases could provide

  13. The Java Legacy Interface

    DEFF Research Database (Denmark)

    Korsholm, Stephan

    2007-01-01

    The Java Legacy Interface is designed to use Java for encapsulating native legacy code on small embedded platforms. We discuss why existing technologies for encapsulating legacy code (JNI) is not sufficient for an important range of small embedded platforms, and we show how the Java Legacy...... Interface offers this previously missing functionality. We describe an implementation of the Java Legacy Interface for a particular virtual machine, and how we have used this virtual machine to integrate Java with an existing, commercial, soft real-time, C/C++ legacy platform....

  14. The computer graphics interface

    CERN Document Server

    Steinbrugge Chauveau, Karla; Niles Reed, Theodore; Shepherd, B

    2014-01-01

    The Computer Graphics Interface provides a concise discussion of computer graphics interface (CGI) standards. The title is comprised of seven chapters that cover the concepts of the CGI standard. Figures and examples are also included. The first chapter provides a general overview of CGI; this chapter covers graphics standards, functional specifications, and syntactic interfaces. Next, the book discusses the basic concepts of CGI, such as inquiry, profiles, and registration. The third chapter covers the CGI concepts and functions, while the fourth chapter deals with the concept of graphic obje

  15. The interface effect

    CERN Document Server

    Galloway, Alexander R

    2013-01-01

    Interfaces are back, or perhaps they never left. The familiar Socratic conceit from the Phaedrus, of communication as the process of writing directly on the soul of the other, has returned to center stage in today's discussions of culture and media. Indeed Western thought has long construed media as a grand choice between two kinds of interfaces. Following the optimistic path, media seamlessly interface self and other in a transparent and immediate connection. But, following the pessimistic path, media are the obstacles to direct communion, disintegrating self and other into misunderstanding

  16. A saúde e os processos de trabalho no capitalismo: reflexões na interface da psicodinâmica do trabalho e da sociologia do trabalho Health and labor processes in capitalism: considerations on the interface between the psychodynamics and sociology of work

    Directory of Open Access Journals (Sweden)

    Álvaro Roberto Crespo Merlo

    2007-04-01

    Full Text Available A organização dos processos de trabalho nos quais estão inseridos os trabalhadores produz graves conseqüências sobre a saúde. Essas têm origem, principalmente, na separação entre concepção e execução, introduzidas pelos modelos de gestão taylorista e fordista. As mudanças promovidas pela implementação do modelo de gestão japonês passaram a demandar um trabalhador aparentemente mais engajado ao seu trabalho, apto a realizar diversas operações e mais escolarizado. Porém, observa-se que ao sofrimento daqueles que trabalham em tarefas que não foram atingidas pela reestruturação produtiva, acrescenta-se o sofrimento provocado pelas transformações em curso no trabalho, exigindo novos atributos ao trabalhador, atingindo a saúde física e mental.Workers are submitted to labor processes that produce serious health consequences. Mainly, these consequences originate from management models that separate conception from execution, introduced by Taylorism and Fordism. The implementation of the Japanese management model incurred changes that demanded a more educated worker capable of accomplishing several tasks, and who is apparently more committed to his/her work. However, the physical and mental health of workers whose activities were not affected by production restructuring is being affected by the transformations presently in course in the workplace, such as new performances and demands.

  17. Scalable coherent interface

    International Nuclear Information System (INIS)

    Alnaes, K.; Kristiansen, E.H.; Gustavson, D.B.; James, D.V.

    1990-01-01

    The Scalable Coherent Interface (IEEE P1596) is establishing an interface standard for very high performance multiprocessors, supporting a cache-coherent-memory model scalable to systems with up to 64K nodes. This Scalable Coherent Interface (SCI) will supply a peak bandwidth per node of 1 GigaByte/second. The SCI standard should facilitate assembly of processor, memory, I/O and bus bridge cards from multiple vendors into massively parallel systems with throughput far above what is possible today. The SCI standard encompasses two levels of interface, a physical level and a logical level. The physical level specifies electrical, mechanical and thermal characteristics of connectors and cards that meet the standard. The logical level describes the address space, data transfer protocols, cache coherence mechanisms, synchronization primitives and error recovery. In this paper we address logical level issues such as packet formats, packet transmission, transaction handshake, flow control, and cache coherence. 11 refs., 10 figs

  18. Natural gesture interfaces

    Science.gov (United States)

    Starodubtsev, Illya

    2017-09-01

    The paper describes the implementation of the system of interaction with virtual objects based on gestures. The paper describes the common problems of interaction with virtual objects, specific requirements for the interfaces for virtual and augmented reality.

  19. Pattern formation at interfaces

    CERN Document Server

    Maier, Giulio; Nepomnyashchy, Alexander

    2010-01-01

    Applying modern nonlinear stability theory to problems of continuous media mechanics in the presence of interfaces, this text is relevant to materials science, chemical engineering, and heat transfer technologies, as well as to reaction-diffusion systems.

  20. Interface Anywhere Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To illustrate the viability of this technology, a prototype Natural User Interface (NUI) was developed as a proof-of-concept for system control.  Gesture and...

  1. Complex Interfaces Under Change

    DEFF Research Database (Denmark)

    Rosbjerg, Dan

    The hydrosphere is dynamic across the major compartments of the Earth system: the atmosphere, the oceans and seas, the land surface water, and the groundwater within the strata below the two last compartments. The global geography of the hydrosphere essentially depends on thermodynamic and mechan...... these interfaces and interfaced compartments and processes. Climate, sea-level, oceanographic currents and hydrological processes are all affected, while anthropogenic changes are often intense in the geographic settings corresponding to such interfaces.......The hydrosphere is dynamic across the major compartments of the Earth system: the atmosphere, the oceans and seas, the land surface water, and the groundwater within the strata below the two last compartments. The global geography of the hydrosphere essentially depends on thermodynamic...... and mechanical processes that develop within this structure. Water-related processes at the interfaces between the compartments are complex, depending both on the interface itself, and on the characteristics of the interfaced compartments. Various aspects of global change directly or indirectly impact...

  2. Lectures on random interfaces

    CERN Document Server

    Funaki, Tadahisa

    2016-01-01

    Interfaces are created to separate two distinct phases in a situation in which phase coexistence occurs. This book discusses randomly fluctuating interfaces in several different settings and from several points of view: discrete/continuum, microscopic/macroscopic, and static/dynamic theories. The following four topics in particular are dealt with in the book. Assuming that the interface is represented as a height function measured from a fixed-reference discretized hyperplane, the system is governed by the Hamiltonian of gradient of the height functions. This is a kind of effective interface model called ∇φ-interface model. The scaling limits are studied for Gaussian (or non-Gaussian) random fields with a pinning effect under a situation in which the rate functional of the corresponding large deviation principle has non-unique minimizers. Young diagrams determine decreasing interfaces, and their dynamics are introduced. The large-scale behavior of such dynamics is studied from the points of view of the hyd...

  3. Machine Learning in Proof General: Interfacing Interfaces

    OpenAIRE

    Komendantskaya, Ekaterina; Heras, Jónathan; Grov, Gudmund

    2012-01-01

    We present ML4PG - a machine learning extension for Proof General. It allows users to gather proof statistics related to shapes of goals, sequences of applied tactics, and proof tree structures from the libraries of interactive higher-order proofs written in Coq and SSReflect. The gathered data is clustered using the state-of-the-art machine learning algorithms available in MATLAB and Weka. ML4PG provides automated interfacing between Proof General and MATLAB/Weka. The results of clustering a...

  4. Machine Learning in Proof General: Interfacing Interfaces

    Directory of Open Access Journals (Sweden)

    Ekaterina Komendantskaya

    2013-07-01

    Full Text Available We present ML4PG - a machine learning extension for Proof General. It allows users to gather proof statistics related to shapes of goals, sequences of applied tactics, and proof tree structures from the libraries of interactive higher-order proofs written in Coq and SSReflect. The gathered data is clustered using the state-of-the-art machine learning algorithms available in MATLAB and Weka. ML4PG provides automated interfacing between Proof General and MATLAB/Weka. The results of clustering are used by ML4PG to provide proof hints in the process of interactive proof development.

  5. Três gerações de avaliação da educação básica no Brasil: interfaces com o currículo da/na escola Three generations of assessments of basic education in Brazil: interfaces with the curriculum in/of the school

    Directory of Open Access Journals (Sweden)

    Alicia Bonamino

    2012-06-01

    Full Text Available Analisam-se, neste artigo, três gerações de avaliação da educação em larga escala, a partir dos objetivos e desenhos usuais em iniciativas implementadas no Brasil. A primeira geração consiste na avaliação diagnóstica da qualidade da educação, sem atribuição de consequências diretas para as escolas e para o currículo escolar. As outras duas gerações articulam os resultados das avaliações a políticas de responsabilização, com atribuição de consequências simbólicas ou materiais para os agentes escolares. Tomando como parâmetro de análise os objetivos e desenhos dessas avaliações, bem como estudos e pesquisas que produziram evidências sobre o tema, exploram-se possíveis implicações para o currículo escolar. Por um lado, discutem-se os riscos de as provas padronizadas, com avaliações que referenciam políticas de responsabilização envolvendo consequências fracas e fortes, exacerbarem a preocupação de diretores e professores com a preparação para os testes e para as atividades por estes abordadas, levando a um estreitamento do currículo escolar. Por outro lado, aponta-se o potencial das avaliações de segunda e terceira gerações em propiciarem uma discussão informada sobre o currículo escolar, em termos das habilidades fundamentais de leitura e matemática que ainda não têm sido garantidas a todos os alunos.Three generations of large scale assessments of education are analyzed in this article based on the objectives and designs usual in initiatives of this kind implemented in Brazil. The first generation consists in the diagnostic assessment of the quality of education, without attribution of direct consequences for schools and for school curricula. The other two generations articulate the results of the assessments to accountability policies, with the attribution of symbolic or material consequences for the school agents. Taking as a parameter of analysis the objectives and designs of these

  6. Environmental materials and interfaces

    International Nuclear Information System (INIS)

    1991-11-01

    A workshop that explored materials and interfaces research needs relevant to national environmental concerns was conducted at Pacific Northwest Laboratory. The purposes of the workshop were to refine the scientific research directions being planned for the Materials and Interface Program in the Molecular Science Research Center (MSRC) and further define the research and user equipment to the included as part of the proposed Environmental and Molecular Science Laboratory (EMSL). Three plenary information sessions served to outline the background, objectives, and status of the MSRC and EMSL initiatives; selected specific areas with environmentally related materials; and the status of capabilities and facilities planned for the EMSL. Attention was directed to four areas where materials and interface science can have a significant impact on prevention and remediation of environmental problems: in situ detection and characterization of hazardous wastes (sensors), minimization of hazardous waste (separation membranes, ion exchange materials, catalysts), waste containment (encapsulation and barrier materials), and fundamental understanding of contaminant transport mechanisms. During all other sessions, the participants were divided into three working groups for detailed discussion and the preparation of a written report. The working groups focused on the areas of interface structure and chemistry, materials and interface stability, and materials synthesis. These recommendations and suggestions for needed research will be useful for other researchers in proposing projects and for suggesting collaborative work with MSRC researchers. 1 fig

  7. Interfacing Sensors To Micro Controllers

    KAUST Repository

    Norain, Mohamed

    2018-01-15

    This lecture will cover the most common interface and interface techniques between sensors and microcontrollers. The presentation will introduce the pros and cons of each interface type including analogue, digital and serial output sensors. It will also cover the basic required electronics knowledge to help you in selecting and designing your next sensor to microcontroller interface.

  8. High-bandwidth memory interface

    CERN Document Server

    Kim, Chulwoo; Song, Junyoung

    2014-01-01

    This book provides an overview of recent advances in memory interface design at both the architecture and circuit levels. Coverage includes signal integrity and testing, TSV interface, high-speed serial interface including equalization, ODT, pre-emphasis, wide I/O interface including crosstalk, skew cancellation, and clock generation and distribution. Trends for further bandwidth enhancement are also covered.   • Enables readers with minimal background in memory design to understand the basics of high-bandwidth memory interface design; • Presents state-of-the-art techniques for memory interface design; • Covers memory interface design at both the circuit level and system architecture level.

  9. Portraying User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms

    2008-01-01

    The user interface is coming of age. Papers adressing UI history have appeared in fair amounts in the last 25 years. Most of them address particular aspects such as an in­novative interface paradigm or the contribution of a visionary or a research lab. Contrasting this, papers addres­sing UI...... history at large have been sparse. However, a small spate of publications appeared recently, so a reasonable number of papers are available. Hence this work-in-progress paints a portrait of the current history of user interfaces at large. The paper first describes a theoretical framework recruited from...... history. Next the paper analyses a selected sample of papers on UI history at large. The analysis shows that the current state-of-art is featured by three aspects: Firstly internalism, in that the papers adress the tech­nologies in their own right with little con­text­ualization, secondly whiggism...

  10. Complex Interfaces Under Change

    DEFF Research Database (Denmark)

    Rosbjerg, Dan

    The hydrosphere is dynamic across the major compartments of the Earth system: the atmosphere, the oceans and seas, the land surface water, and the groundwater within the strata below the two last compartments. The global geography of the hydrosphere essentially depends on thermodynamic and mechan......The hydrosphere is dynamic across the major compartments of the Earth system: the atmosphere, the oceans and seas, the land surface water, and the groundwater within the strata below the two last compartments. The global geography of the hydrosphere essentially depends on thermodynamic...... these interfaces and interfaced compartments and processes. Climate, sea-level, oceanographic currents and hydrological processes are all affected, while anthropogenic changes are often intense in the geographic settings corresponding to such interfaces....

  11. Catalytic interface erosion

    International Nuclear Information System (INIS)

    Meng, H.; Cohen, E.G.D.

    1995-01-01

    We study interface erosion processes: catalytic erosions. We present two cases. (1) The erosion of a completely occupied lattice by one single moving particle starting from somewhere inside the lattice, considering deterministic as well as probabilistic erosion rules. In the latter case, the eroded regions appear to have interfaces with continuously tunable fractal dimensions. (2) The kinetic roughening of an initially flat surface, where ballistic or diffusion-limited particles, which remain intact themselves, erode the surface coming from the outside, using the same erosion rules as in (1). Many features resembling realistic interfaces, for example, islands and inlets, are generated. The dependence of the surface width on the system size is due to both the erosion mechanism and the way particles move before reaching the surface

  12. Ecological Interface Design

    DEFF Research Database (Denmark)

    Vicente, Kim J.; Rasmussen, Jens

    1992-01-01

    A theoretical framework for designing interfaces for complex human-machine systems is proposed. The framework, called ecological interface design (EID), is based on the skills, rules, knowledge taxonomy of cognitive control. The basic goal of EID is twofold: first, not to force processing....... Three prescriptive design principles are suggested to achieve this objective, each directed at supporting a particular level of cognitive control. Theoretical foundations of the framework are laid out. Particular attention is paid to presenting a coherent deductive argument justifying the principles...... of other approaches to interface design indicates that EID has a unique and significant contribution to make. Third, the results of an initial empirical evaluation also provide some preliminary support for the EID framework. Some issues for future research are outlined....

  13. User interface design considerations

    DEFF Research Database (Denmark)

    Andersen, Simon Engedal; Jakobsen, Arne; Rasmussen, Bjarne D.

    1999-01-01

    When designing a user interface for a simulation model there are several important issues to consider: Who is the target user group, and which a priori information can be expected. What questions do the users want answers to and what questions are answered using a specific model?When developing...... and output variables. This feature requires special attention when designing the user interface and a special approach for controlling the user selection of input and output variables are developed. To obtain a consistent system description the different input variables are grouped corresponding...... the user interface of EESCoolTools these issues led to a series of simulation tools each with a specific purpose and a carefully selected set of input and output variables. To allow a more wide range of questions to be answered by the same model, the user can change between different sets of input...

  14. Refinement by interface instantiation

    DEFF Research Database (Denmark)

    Hallerstede, Stefan; Hoang, Thai Son

    2012-01-01

    Decomposition is a technique to separate the design of a complex system into smaller sub-models, which improves scalability and team development. In the shared-variable decomposition approach for Event-B sub-models share external variables and communicate through external events which cannot...... be easily refined. Our first contribution hence is a proposal for a new construct called interface that encapsulates the external variables, along with a mechanism for interface instantiation. Using the new construct and mechanism, external variables can be refined consistently. Our second contribution...... is an approach for verifying the correctness of Event-B extensions using the supporting Rodin tool. We illustrate our approach by proving the correctness of interface instantiation....

  15. After Rigid Interfaces

    DEFF Research Database (Denmark)

    Troiano, Giovanni Maria

    (1) a user study with a prototype of an elastic, deformable display, and (2) a user study of deformable interfaces for performing music. The first study reports a guessability study with an elastic, deformable display where 17 participants suggested fitting gestures for 29 tasks, including navigation...... use deformable interfaces to perform electronic music. First, we invited musicians with different backgrounds (e.g., performers, DJs, instrument builders) to three workshops, where we made them explore 10 deformable objects and generate ideas on how to use those to perform music. Then, we implemented...... sensors in the five preferred objects and programmed them for controlling sounds with computer software. Finally, we ran a performance study where six musicians performed music with deformable interfaces at their studios. Results from the performance study show that musicians systematically map...

  16. Workshop on Interface Phenomena

    CERN Document Server

    Kreuzer, Hans

    1987-01-01

    This book contains the proceedings of the first Workshop on Interface Phenomena, organized jointly by the surface science groups at Dalhousie University and the University of Maine. It was our intention to concentrate on just three topics related to the kinetics of interface reactions which, in our opinion, were frequently obscured unnecessarily in the literature and whose fundamental nature warranted an extensive discussion to help clarify the issues, very much in the spirit of the Discussions of the Faraday Society. Each session (day) saw two principal speakers expounding the different views; the session chairmen were asked to summarize the ensuing discussions. To understand the complexity of interface reactions, paradigms must be formulated to provide a framework for the interpretation of experimen­ tal data and for the construction of theoretical models. Phenomenological approaches have been based on a small number of rate equations for the concentrations or mole numbers of the various species involved i...

  17. Urban water interfaces

    Science.gov (United States)

    Gessner, M. O.; Hinkelmann, R.; Nützmann, G.; Jekel, M.; Singer, G.; Lewandowski, J.; Nehls, T.; Barjenbruch, M.

    2014-06-01

    Urban water systems consist of large-scale technical systems and both natural and man-made water bodies. The technical systems are essential components of urban infrastructure for water collection, treatment, storage and distribution, as well as for wastewater and runoff collection and subsequent treatment. Urban aquatic ecosystems are typically subject to strong human influences, which impair the quality of surface and ground waters, often with far-reaching impacts on downstream aquatic ecosystems and water users. The various surface and subsurface water bodies in urban environments can be viewed as interconnected compartments that are also extensively intertwined with a range of technical compartments of the urban water system. As a result, urban water systems are characterized by fluxes of water, solutes, gases and energy between contrasting compartments of a technical, natural or hybrid nature. Referred to as urban water interfaces, boundaries between and within these compartments are often specific to urban water systems. Urban water interfaces are generally characterized by steep physical and biogeochemical gradients, which promote high reaction rates. We hypothesize that they act as key sites of processes and fluxes with notable effects on overall system behaviour. By their very nature, urban water interfaces are heterogeneous and dynamic. Therefore, they increase spatial heterogeneity in urban areas and are also expected to contribute notably to the temporal dynamics of urban water systems, which often involve non-linear interactions and feedback mechanisms. Processes at and fluxes across urban water interfaces are complex and less well understood than within well-defined, homogeneous compartments, requiring both empirical investigations and new modelling approaches at both the process and system level. We advocate an integrative conceptual framework of the urban water system that considers interfaces as a key component to improve our fundamental

  18. Refraction interface radiography; Refraktions-Interface-Radiographie

    Energy Technology Data Exchange (ETDEWEB)

    Hentschel, Manfred P.; Kupsch, Andreas; Lange, Axel; Mueller, Bernd R. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany). Fachbereich 8.5. ' Mikro-ZfP'

    2013-07-01

    Nano-scale structures and interfaces are more and more coming to determine the function of modern materials and components. This calls for methods for their nondestructive characterisation with adapted spatial resolution, a task for which x-ray refraction techniques are well suited on account of their wavelength range. The resulting small-angle scattering causes high local intensity levels which can exceed that of the primary radiation as a result of shift and focussing effects. The predominance of refraction intensity over that of total reflection can be demonstrated using monochromatic synchrotron radiation on homogeneous samples of simple geometry (plates or cylinders). The refraction effect can be used with incidence angles up to a few degrees. Scattering angles are typically in the range of arc seconds to arc minutes.

  19. Interfacing to accelerator instrumentation

    International Nuclear Information System (INIS)

    Shea, T.J.

    1995-01-01

    As the sensory system for an accelerator, the beam instrumentation provides a tremendous amount of diagnostic information. Access to this information can vary from periodic spot checks by operators to high bandwidth data acquisition during studies. In this paper, example applications will illustrate the requirements on interfaces between the control system and the instrumentation hardware. A survey of the major accelerator facilities will identify the most popular interface standards. The impact of developments such as isochronous protocols and embedded digital signal processing will also be discussed

  20. Nonlinear optics at interfaces

    International Nuclear Information System (INIS)

    Chen, C.K.

    1980-12-01

    Two aspects of surface nonlinear optics are explored in this thesis. The first part is a theoretical and experimental study of nonlinear intraction of surface plasmons and bulk photons at metal-dielectric interfaces. The second part is a demonstration and study of surface enhanced second harmonic generation at rough metal surfaces. A general formulation for nonlinear interaction of surface plasmons at metal-dielectric interfaces is presented and applied to both second and third order nonlinear processes. Experimental results for coherent second and third harmonic generation by surface plasmons and surface coherent antiStokes Raman spectroscopy (CARS) are shown to be in good agreement with the theory

  1. Avaliação in vitro da microinfiltração na interface selante/esmalte sob a influência de contaminação, emprego de "primer" e tipo de selante In vitro evaluation of sealant microleakage under the influence of contamination, use of primer and type of sealant

    Directory of Open Access Journals (Sweden)

    Ana Lídia CIAMPONI

    1998-04-01

    Full Text Available Este estudo avaliou, in vitro, a microinfiltração na interface selante/esmalte sob a influência de contaminação do meio (saliva, emprego de "primer" (Tenure - Den-Mat e tipo de selante (Concise Light Cured White Sealant - 3M; Fluroshield - Caulk/Dentsply. Os resultados foram obtidos a partir de medidas lineares, utilizando um sistema computadorizado de imagens digitalizadas (IMAGE PLUS. Pôde-se concluir que a contaminação salivar e a utilização de "primer" atuaram de maneira diversa nas diferentes etapas do procedimento clínico; os selantes comportaram-se de maneira semelhante quando submetidos às mesmas condições; o emprego do "primer" favoreceu o escoamento do selante Fluroshield (Caulk/Dentsply nos sulcos e pôde ser observado maior número de bolhas com esse material.This in vitro study investigated the effect of different types of sealants (Concise Light Cured White Sealant - 3M; Fluroshield - Caulk/Dentsply and the use of primer (Tenure - Den-Mat on the microleakage of saliva-contaminated enamel. Sealants were placed on 360 surfaces (occlusal, buccal and lingual of extracted teeth free of caries. After being prepared according to each experimental group, they were thermocycled (5 and 55ºC for 500 and 2.000 cycles. Then they were immersed in a silver nitrate solution (50% and cut in longitudinal slices. The results were described in linear measurements (mm by means of a digital-image analysis system. Contamination and use of primer had different influences when subjected to the different experimental conditions. Both sealants had the same influence on microleakage. Flow of Fluroshield into pit and fissures was improved by use of the primer, and a greater amount of bubbles could be observed in this material.

  2. Photochemistry at Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Eisenthal, Kenneth B [Columbia Univ., New York, NY (United States)

    2015-02-24

    We have advanced our capabilities to investigate ultrafast excited state dynamics at a liquid interface using a pump to excite molecules to higher electronic states and then probe the subsequent time evolution of the interfacial molecules with femtosecond time delayed vibrational SFG.

  3. The Liquid Vapour Interface

    DEFF Research Database (Denmark)

    Als-Nielsen, Jens Aage

    1985-01-01

    In this short review we are concerned with the density variation across the liquid-vapour interface, i.e. from the bulk density of the liquid to the essentially zero density of the vapour phase. This density variation can in principle be determined from the deviation of the reflectivity from...

  4. Source interface for ALICE

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    This interface is part of the ALICE detector data link (DDL), which transmits data at 100 Mbytes/sec from the detectors to a host computer. A total of 400 DDLs will be installed on ALICE. These silicon devices have been developed especially for use in the high radiation levels produced in detector environments.

  5. Interface transfer of equipment

    Energy Technology Data Exchange (ETDEWEB)

    Ashton, I.J.

    1989-04-01

    This article details the interface transfer of heavy-duty face equipment from 5's to 6's face in the Great Row Seam at Silverdale Colliery, British Coal, Western Area. The salvaged face was roofbolted using leg-mounted Wombat drilling rigs. All heavy-duty equipment was transported by FSV's. 5 figs.

  6. Quantitative AES at Interfaces

    Czech Academy of Sciences Publication Activity Database

    Lejček, Pavel; Hofmann, S.

    2011-01-01

    Roč. 17, č. 3 (2011), s. 241-246 ISSN 1341-1756 R&D Projects: GA ČR GA106/08/0369 Institutional research plan: CEZ:AV0Z10100520 Keywords : quantitative AES * interfaces * grain boundaries * fracture surfaces Subject RIV: BM - Solid Matter Physics ; Magnetism

  7. SOFC interface studies

    DEFF Research Database (Denmark)

    Jacobsen, Torben; Bay, Lasse; West, Keld

    come from channels formed along the interface, i.e. an elongation of the triple phase boundary. Based on the assumption of a formation of interfacial reaction zones (i.e. pores) which are only stable in the presence of a local current, a model describing the hysteresis observed is developed. Fig...

  8. Workflow User Interfaces Patterns

    Directory of Open Access Journals (Sweden)

    Jean Vanderdonckt

    2012-03-01

    Full Text Available Este trabajo presenta una colección de patrones de diseño de interfaces de usuario para sistemas de información para el flujo de trabajo; la colección incluye cuarenta y tres patrones clasificados en siete categorías identificados a partir de la lógica del ciclo de vida de la tarea sobre la base de la oferta y la asignación de tareas a los responsables de realizarlas (i. e. recursos humanos durante el flujo de trabajo. Cada patrón de la interfaz de usuario de flujo de trabajo (WUIP, por sus siglas en inglés se caracteriza por las propiedades expresadas en el lenguaje PLML para expresar patrones y complementado por otros atributos y modelos que se adjuntan a dicho modelo: la interfaz de usuario abstracta y el modelo de tareas correspondiente. Estos modelos se especifican en un lenguaje de descripción de interfaces de usuario. Todos los WUIPs se almacenan en una biblioteca y se pueden recuperar a través de un editor de flujo de trabajo que vincula a cada patrón de asignación de trabajo a su WUIP correspondiente.A collection of user interface design patterns for workflow information systems is presented that contains forty three resource patterns classified in seven categories. These categories and their corresponding patterns have been logically identified from the task life cycle based on offering and allocation operations. Each Workflow User Interface Pattern (WUIP is characterized by properties expressed in the PLML markup language for expressing patterns and augmented by additional attributes and models attached to the pattern: the abstract user interface and the corresponding task model. These models are specified in a User Interface Description Language. All WUIPs are stored in a library and can be retrieved within a workflow editor that links each workflow pattern to its corresponding WUIP, thus giving rise to a user interface for each workflow pattern.

  9. Dentin bonding performance and interface observation of an MMA-based restorative material.

    Science.gov (United States)

    Shinagawa, Junichi; Inoue, Go; Nikaido, Toru; Ikeda, Masaomi; Sadr, Alireza; Tagami, Junji

    2016-07-30

    The purpose of this study was to evaluate bonding performance and dentin interface acid resistance using a 4-META/MMA-TBB based restorative material (BF) compared to a conventional 4-META/MMA-TBB resin cement (SB), and the effect of sodium fluoride (NaF) addition to the materials. Dentin surfaces were treated with 10% citric acid-3% ferric chloride (10-3) or 4-META containing self-etching primer (TP), followed by application of BF or SB polymer powders with or without NaF, to evaluate microtensile bond strength (µTBS) in six experimental groups; 10-3/SB, 10-3/BF, TP/SB, TP/BF, TP/SB/NaF and TP/BF/NaF. SEM observation of the resin-dentin interface was performed after acid-base challenge to evaluate interfacial dentin resistance to acid attack. TP/BF showed highest µTBS, while NaF polymers decreased µTBS. TP/BF showed funnel-shaped erosion at the interface, however, NaF polymers improved acid resistance of interface. In conclusion, BF demonstrated high µTBSs and low acid-resistance at the interface. NaF addition enhanced acid resistance but decreased µTBS.

  10. Easy-to-use interface

    International Nuclear Information System (INIS)

    Blattner, D O; Blattner, M M; Tong, Y.

    1999-01-01

    Easy-to-use interfaces are a class of interfaces that fall between public access interfaces and graphical user interfaces in usability and cognitive difficulty. We describe characteristics of easy-to-use interfaces by the properties of four dimensions: selection, navigation, direct manipulation, and contextual metaphors. Another constraint we introduced was to include as little text as possible, and what text we have will be in at least four languages. Formative evaluations were conducted to identify and isolate these characteristics. Our application is a visual interface for a home automation system intended for a diverse set of users. The design will be expanded to accommodate the visually disabled in the near future

  11. PREFACE: Water at interfaces Water at interfaces

    Science.gov (United States)

    Gallo, P.; Rovere, M.

    2010-07-01

    This special issue is devoted to illustrating important aspects and significant results in the field of modeling and simulation of water at interfaces with solutes or with confining substrates, focusing on a range of temperatures from ambient to supercooled. Understanding the behavior of water, in contact with different substrates and/or in solutions, is of pivotal importance for a wide range of applications in physics, chemistry and biochemistry. Simulations of confined and/or interfacial water are also relevant for testing how different its behavior is with respect to bulk water. Simulations and modeling in this field are of particular importance when studying supercooled regions where water shows anomalous properties. These considerations motivated the organization of a workshop at CECAM in the summer of 2009 which aimed to bring together scientists working with computer simulations on the properties of water in various environments with different methodologies. In this special issue, we collected a variety of interesting contributions from some of the speakers of the workshop. We have roughly classified the contributions into four groups. The papers of the first group address the properties of interfacial and confined water upon supercooling in an effort to understand the relation with anomalous behavior of supercooled bulk water. The second group deals with the specific problem of solvation. The next group deals with water in different environments by considering problems of great importance in technological and biological applications. Finally, the last group deals with quantum mechanical calculations related to the role of water in chemical processes. The first group of papers is introduced by the general paper of Stanley et al. The authors discuss recent progress in understanding the anomalies of water in bulk, nanoconfined, and biological environments. They present evidence that liquid water may display 'polymorphism', a property that can be present in

  12. Software Interfaces: On The Impact of Interface Design Anomalies

    OpenAIRE

    Abdeen, Hani; Shata, Osama; Erradi, Abdelkarim

    2013-01-01

    Interfaces are recognized as an important mechanism to define contracts governing interactions between semi-independent software modules. Well-designed interfaces significantly reduce software complexity and ease maintainability by fostering modularization, hiding implementation details and minimizing the impact caused by changes in the software implementation. However, designing good interfaces is not a trivial task. The presence of interface design defects often yield increased development ...

  13. Space as interface

    DEFF Research Database (Denmark)

    Lykke-Olesen, Andreas

    2006-01-01

    to conceptualize space as more than the physical container for human activity. I do this by investigating space as interface. Based on a theory of space and place set forth by Tuan (Tuan, 1977), and informed by an explorative research approach, I make the distinction between space and place as a Euclidian space...... with actual use (Hallnäs et al. 2006). The challenge thus becomes understanding space as the interface, and further how intentions can be induced into the design of space in ways that point towards the dimensions of place, when interpreted in actual use situations. By designing and exploring a range......This Ph.D. dissertation takes its offset in the migration of technology and computing power into our physical environment. The consequence of this movement, termed ubiquitous computing (Wieser, 1991), is a new relationship between humans, technology and spaces. In this new context, I seek...

  14. Study of metallic interfaces

    International Nuclear Information System (INIS)

    Job, Bernard

    1973-01-01

    In the first part, the diffusion of the radiotracer 59 Fe along the artificially silver-iron interface has been investigated for 500 4 exp - 41200/RT. These values are compared with the values of surface and grain boundary diffusion of silver and iron. In the second part we have extended mass-transport methods (scratch smoothing and grain boundary grooving) to solid-solid interface. These methods lead to a value of Di* δ γi (Di* δ is the effective diffusion parameter and γi the interfacial energy). Knowing the value of γi = 4000 ergs /cm 2 from the equilibrium angle method we have deducted the value of Di*δ. (author) [fr

  15. Politics at the interface

    DEFF Research Database (Denmark)

    Kannabiran, Gobinaath; Petersen, Marianne Graves

    2010-01-01

    At the birth of participatory design, there was a strong political consciousness surrounding the design of new technology, the design process in particular, establishing a rich set of methods and tools for user-centered design. Today, the term design has extended its scope of concern beyond...... the process of design and into how users interact with the designed product on a day-to-day basis. This paper is an attempt to call to attention the need for a new set of methods, attitudes and approaches, along with the existing, to discuss, analyze and reflect upon the politics at the interface....... By presenting a critical analysis of two design cases, we elicit the importance of such an agenda and the implications for design in doing so. We use the Foucauldian notion of power to analyze the power relationships in these two cases and to articulate the politics at the interface. We conclude by emphasizing...

  16. Urban Sound Interfaces

    DEFF Research Database (Denmark)

    Breinbjerg, Morten

    2012-01-01

    This paper draws on the theories of Michel de Certeau and Gaston Bachelard to discuss how media architecture, in the form of urban sound interfaces, can help us perceive the complexity of the spaces we inhabit, by exploring the history and the narratives of the places in which we live. In this pa......This paper draws on the theories of Michel de Certeau and Gaston Bachelard to discuss how media architecture, in the form of urban sound interfaces, can help us perceive the complexity of the spaces we inhabit, by exploring the history and the narratives of the places in which we live....... In this paper, three sound works are discussed in relation to the iPod, which is considered as a more private way to explore urban environments, and as a way to control the individual perception of urban spaces....

  17. At the Knowledge Interface

    DEFF Research Database (Denmark)

    Nielsen, Rikke Kristine; Buono, Anthony; Poulfelt, Flemming

    2017-01-01

    researchers. The paper addresses this challenge in terms of moving across this interface, developing the abilities and proficiency for co-creating research that meets the needs of academics and practitioners. The competency drivers behind strengthening research-practice impact are examined within the context......-produced research projects. Based on this analysis, the implications for research-oriented consulting and our interventions with a view to developing co-created academic- and practice-oriented impact are discussed...

  18. Microsystem Interfaces for Space

    OpenAIRE

    Nguyen, Hugo

    2006-01-01

    Microsystem interfaces to the macroscopic surroundings and within the microsystems themselves are formidable challenges that this thesis makes an effort to overcome, specifically for enabling a spacecraft based entirely on microsystems. The NanoSpace-1 nanospacecraft is a full-fledged satellite design with mass below 10 kg. The high performance with respect to mass is enabled by a massive implementation of microsystem technology – the entire spacecraft structure is built from square silicon p...

  19. An Approach to Interface Synthesis

    DEFF Research Database (Denmark)

    Madsen, Jan; Hald, Bjarne

    1995-01-01

    Presents a novel interface synthesis approach based on a one-sided interface description. Whereas most other approaches consider interface synthesis as optimizing a channel to existing client/server modules, we consider the interface synthesis as part of the client/server module synthesis (which...... may contain the re-use of existing modules). The interface synthesis approach describes the basic transformations needed to transform the server interface description into an interface description on the client side of the communication medium. The synthesis approach is illustrated through a point......-to-point communication, but is applicable to synthesis of a multiple client/server environment. The interface description is based on a formalization of communication events....

  20. Interface Input/Output Automata

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand; Nyman, Ulrik; Wasowski, Andrzej

    2006-01-01

    Building on the theory of interface automata by de Alfaro and Henzinger we design an interface language for Lynch’s I/O, a popular formalism used in the development of distributed asynchronous systems, not addressed by previous interface research. We introduce an explicit separation of assumptions...... a method for solving systems of relativized behavioral inequalities as used in our setup and draw a formal correspondence between our work and interface automata....

  1. Progress report (interface segment)

    International Nuclear Information System (INIS)

    Fukahori, T.

    2008-01-01

    Full text: 1. Presentations and status reports. T. Fukahori (JAEA) reported on the plans for the www interface layout. Discussions included which functions were needed for new RIPL-3 web pages. The results are summarized in next section. 2. Layout of the interfaces and retrieval tools and web. RIPL-3 home page will include some description about RIPL-3 and link to the Technical report in pdf-format. The web page for 'mass' segment contains same contents as RIPL-2 except the removal of the information about ground state deformation. The abundance data will be replaced by data from the new BNL wallet card (2005 version). The Q-value calculation tool will be also improved. The 'Nuclear Matter Density' will be renamed 'Nucleon Density Distribution'. 'Levels' segment will be same as before, and the deformation parameters for excited levels will be moved from 'optical' segment and given the name 'deformation'. 'Resonances' segment will be same as before - may be replaced with the new Mughabghab tables. 'Optical' segment will be same as before, and the deformation parameters for excited levels will be moved to 'optical' segment and given the name 'deformation'. The optical model calculation with ECIS and OPTMAN will be considered and double-folding calculation tool will possibly be provided. 'Densities' segment will be same as before, and the plotting programs will be checked. The 3-7 sets of combination of GC, BSFG, GSFM with/without enhancement factors will be given. 'Gamma' segment will be same as before, with addition of MLO and theoretical GDR calculation. 'Fission' segment will be same as before, and 'Exp.' will be renamed. New barrier evaluations will be added, for example, transition (2+) states. The fission spectrum calculation tool (codes and inputs) may be added. The fundamental format will be kept as before. For new items such as deformed 'nucleon density distribution', double-folding potential, evaluated fission barrier (extension into 3 or more) and fission

  2. Cooperative Microsystems and Neural Interfaces

    Science.gov (United States)

    2009-03-04

    Syst Rehab Engin 16: 453-472 (2008) Targeted Reinnervation FINE Approved For Public Release, Distribution Unlimited Peripheral Nerve Microsystems...Outline • Signaling in the Nervous System - Signal sources of cortex and peripheral nerve • Clinically Useful Neural Interfaces • Cortical Recording...Arrays • Peripheral Nerve Interfaces • Challenges and Opportunities for Microsystems in New Neural Interfaces Approved For Public Release

  3. Honeycomb-like porous 3D nickel electrodeposition for stable Li and Na metal anodes

    NARCIS (Netherlands)

    Xu, Y.; Menon, A.S.; Harks, P.P.R.M.L.; Hermes, D.C.; Haverkate, L.A.; Unnikrishnan, S.; Mulder, F.M.

    2018-01-01

    Li and Na metals have the highest theoretical anode capacity for Li/Na batteries, but the operational safety hazards stemming from uncontrolled growth of Li/Na dendrites and unstable electrode-electrolyte interfaces hinder their real-world applications. Recently, the emergence of 3D conductive

  4. Transport processes at fluidic interfaces

    CERN Document Server

    Reusken, Arnold

    2017-01-01

    There are several physico-chemical processes that determine the behavior of multiphase fluid systems – e.g., the fluid dynamics in the different phases and the dynamics of the interface(s), mass transport between the fluids, adsorption effects at the interface, and transport of surfactants on the interface – and result in heterogeneous interface properties. In general, these processes are strongly coupled and local properties of the interface play a crucial role. A thorough understanding of the behavior of such complex flow problems must be based on physically sound mathematical models, which especially account for the local processes at the interface. This book presents recent findings on the rigorous derivation and mathematical analysis of such models and on the development of numerical methods for direct numerical simulations. Validation results are based on specifically designed experiments using high-resolution experimental techniques. A special feature of this book is its focus on an interdisciplina...

  5. Interfacing with the Night

    OpenAIRE

    Mclean, Alex; Parkinson, Adam

    2014-01-01

    In  this  paper,  the  authors  consider  the  interfaces  between academia and dance music. Dance music and club culture are, we argue, important to computer music and the live performance of electronic music, but there are many different difficulties encountered when trying to present electronic dance music within academic contexts. The authors draw upon their experiences as promoters, performers, researchers and audience members to discuss these difficulties and how and why we might negoti...

  6. NESSUS/NASTRAN Interface

    Science.gov (United States)

    Millwater, Harry; Riha, David

    1996-01-01

    The NESSUS and NASTRAN computer codes were successfully integrated. The enhanced NESSUS code will use NASTRAN for the structural Analysis and NESSUS for the probabilistic analysis. Any quantities in the NASTRAN bulk data input can be random variables. Any NASTRAN result that is written to the output2 file can be returned to NESSUS as the finite element result. The interfacing between NESSUS and NASTRAN is handled automatically by NESSUS. NESSUS and NASTRAN can be run on different machines using the remote host option.

  7. Bubble and drop interfaces

    CERN Document Server

    Miller

    2011-01-01

    The book aims at describing the most important experimental methods for characterizing liquid interfaces, such as drop profile analysis, bubble pressure and drop volume tensiometry, capillary pressure technique, and oscillating drops and bubbles. Besides the details of experimental set ups, also the underlying theoretical basis is presented in detail. In addition, a number of applications based on drops and bubbles is discussed, such as rising bubbles and the very complex process of flotation. Also wetting, characterized by the dynamics of advancing contact angles is discussed critically. Spec

  8. Superconductivity at disordered interfaces

    International Nuclear Information System (INIS)

    Simanek, E.

    1979-01-01

    The increase of the superconducting transition temperature Tsub(c) due to the tunneling of conduction electrons into negative-u centers at a disordered metal-semiconductor interface is calculated. The strong dependence of the experimental increase of Tsub(c) on the Fermi energy of the metal is accounted for by the polaronic reduction of the tunneling matrix elements. The latter reduction is dynamically suppressed by the decreasing lifetime of the localized state as Esub(F) increases. The theoretical enhancement is sufficiently strong to explain the increase of Tsub(c) observed in eutectic alloys. (author)

  9. Brain-computer interface

    DEFF Research Database (Denmark)

    2014-01-01

    A computer-implemented method of providing an interface between a user and a processing unit, the method comprising : presenting one or more stimuli to a user, each stimulus varying at a respective stimulation frequency, each stimulation frequency being associated with a respective user......-selectable input; receiving at least one signal indicative of brain activity of the user; and determining, from the received signal, which of the one or more stimuli the user attends to and selecting the user-selectable input associated with the stimulation frequency of the determined stimuli as being a user...

  10. Portraying User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms

    2008-01-01

    history. Next the paper analyses a selected sample of papers on UI history at large. The analysis shows that the current state-of-art is featured by three aspects: Firstly internalism, in that the papers adress the tech­nologies in their own right with little con­text­ualization, secondly whiggism...... in that they largely address prevailing UI techno­logies, and thirdly history from above in that they focus on the great deeds of the visionaries. The paper then compares this state-of-art in UI history to the much more mature fields history of computing and history of technology. Based hereon, some speculations......The user interface is coming of age. Papers adressing UI history have appeared in fair amounts in the last 25 years. Most of them address particular aspects such as an in­novative interface paradigm or the contribution of a visionary or a research lab. Contrasting this, papers addres­sing UI...

  11. Uma abordagem baseada em XML para construção de Interfaces de Usuário para Múltiplos Dispositivos = A XML-based approach for building multi-device user interfaces

    OpenAIRE

    Ayslan Trevizan Possebom; Antonio Mendes da Silva Filho; Sérgio Roberto Pereira da Silva

    2006-01-01

    O desenvolvimento de aplicações para múltiplos dispositivos leva emconsideração diferentes características e restrições de cada dispositivo. Linguagens de especificação de interfaces e modelos arquiteturais têm sido utilizados por projetistas de interfaces de usuário. Nesse contexto, este artigo apresenta a linguagem de especificação de interfaces de usuário UIML (UIML2 - User Interface Markup Language 2.0) e o modelo arquitetural MIM (Meta-Interface Model), que possuem papel importante na co...

  12. Human-computer interface

    Science.gov (United States)

    Anderson, Thomas G.

    2004-12-21

    The present invention provides a method of human-computer interfacing. Force feedback allows intuitive navigation and control near a boundary between regions in a computer-represented space. For example, the method allows a user to interact with a virtual craft, then push through the windshield of the craft to interact with the virtual world surrounding the craft. As another example, the method allows a user to feel transitions between different control domains of a computer representation of a space. The method can provide for force feedback that increases as a user's locus of interaction moves near a boundary, then perceptibly changes (e.g., abruptly drops or changes direction) when the boundary is traversed.

  13. Space as interface

    DEFF Research Database (Denmark)

    Lykke-Olesen, Andreas

    2006-01-01

    This Ph.D. dissertation takes its offset in the migration of technology and computing power into our physical environment. The consequence of this movement, termed ubiquitous computing (Wieser, 1991), is a new relationship between humans, technology and spaces. In this new context, I seek...... to conceptualize space as more than the physical container for human activity. I do this by investigating space as interface. Based on a theory of space and place set forth by Tuan (Tuan, 1977), and informed by an explorative research approach, I make the distinction between space and place as a Euclidian space...... and a Phenomenological experienced place. In this perspective, place is created by humans as they appropriate space in investing it with emotions and memories and hereby making it meaningful. Space consists of formable physical and digital space, whereas place is made up by four dimensions relating to personal, physical...

  14. Embodiment and Interface

    DEFF Research Database (Denmark)

    Gregersen, Andreas Lindegaard; Grodal, Torben Kragh

    2008-01-01

    The article discusses – based on neurological and phenomenological theory - how the human embodiment supports and constrains the interaction between players and video games. It analyses embodied interaction with the specific hardware/software configuration of the Nintendo Wii and Wii Tennis as well...... as other game system configurations. The article argues that playing video games may provide experiences of extended embodiment where players may experience ownership of both actions and virtual bodies related to the represented game world. The article shows how ownership may be related to differences...... of the player as patient, i.e. being the object of another agent’s actions.  Keywords: Video games, embodiment, interface, agency, action, control, cognition  ...

  15. Curriculum at the Interface

    DEFF Research Database (Denmark)

    This Symposium presents curriculum design and content issues in a Scandinavian business school at its Centenary. The aim is an exploration of an educational institution at the interface of the European Higher Education Area (EHEA) within the historical trends of the European Union. We hope...... this step will empirically document how the goals of the European Higher Education Area are functionally linked with the entrepreneurial sensibilities of administration, faculty, and administrative staff during the concrete operations of work. The series of presentations are framed between trans......-cultural epistemological foundations in insight-based critical realism and inquiry into how the institutional entrepreneurs – the program directors – negotiate opportunities, risks, and tensions in curriculum and program implementation. Detailed case presentations take up curriculum effort to successfully engage issues...

  16. APST interfaces in LINCS

    Energy Technology Data Exchange (ETDEWEB)

    Fletcher, J.G.

    1995-07-01

    APST is an acronym for the four highest of the seven layers of the LINCS hierarchy of communication protocols: (from high to low) Application, Presentation, Session, and Transport. Routines in each but the lowest of these APST layers can utilize the facilities of any lower APST layer (normally, but not necessarily, the immediately next lower layer) by invoking various primitives (macros that in most cases are subroutine calls) defining the upper interface of the lower layer. So there are three APST interfaces: Presentation layer, used by the Application layer; Session layer, normally used by the Presentation layer; and Transport layer, normally used by the Session layer. Logically, each end of a stream (unidirectional sequence of transmitted information) is handled by three modules, one module each for the Presentation, Session, and Transport layers, and each of these modules deals with only that one end of that one stream. The internal workings of the layers, particularly the Transport layer, do not necessarily exhibit this same modularization; for example, the two oppositely directed streams between the same two ends (constituting an association) may interact within a layer. However, such interaction is an implementational detail of no direct interest to those utilizing the layer. The present document does not describe implementation, nor does it discuss in any detail how the modules employ packet headings and data formats to communicate with their partner modules at the other end of a stream. There being one logical module per end of stream is a characteristic only of the Presentation, Session, and Transport layers. An Application layer module usually manages several streams, orchestrating them to achieve some desired purpose. The modules of the layers (Network, Link, and Physical) below the APST layers each handle many streams, multiplexing them through the nodes and channels of the network to transmit them from their origins to their destinations.

  17. Acid chat: gestural interface design

    OpenAIRE

    Gökhan, Ali Oytun; Gokhan, Ali Oytun

    2005-01-01

    AcidChat is an experimental design project that aims to create an innovative computer software interface for Internet chat software using today's well known technologies; Adobe Photoshop, Macromedia Freehand and digital photography. The aim of the project is to create new understandings of interface and it's usage, by adding new conceptions to chat based interfaces which creates a totally new look at the computer software and application. One of the key features is to add a gestural approach ...

  18. Playful User Interfaces. Interfaces that Invite Social and Physical Interaction.

    NARCIS (Netherlands)

    Nijholt, Antinus; Unknown, [Unknown

    2014-01-01

    This book is about user interfaces to applications that can be considered as ‘playful’. The interfaces to such applications should be ‘playful’ as well. The application should be fun, and interacting with such an application should, of course, be fun as well. Maybe more. Why not expect that the

  19. Multimodal human-machine interface based on a brain-computer interface and an electrooculography interface.

    Science.gov (United States)

    Iáñez, Eduardo; Ùbeda, Andrés; Azorín, José M

    2011-01-01

    This paper describes a multimodal interface that combines a Brain-Computer Interface (BCI) with an electrooculography (EOG) interface. The non-invasive spontaneous BCI registers the electrical brain activity through surface electrodes. The EOG interface detects the eye movements through electrodes placed on the face around the eyes. Both kind of signals are registered together and processed to obtain the mental task that the user is thinking and the eye movement performed by the user. Both commands (mental task and eye movement) are combined in order to move a dot in a graphic user interface (GUI). Several experimental tests have been made where the users perform a trajectory to get closer to some targets. To perform the trajectory the user moves the dot in a plane with the EOG interface and using the BCI the dot changes its height.

  20. Playful Interfaces: Introduction and History

    NARCIS (Netherlands)

    Unknown, [Unknown; Nijholt, Antinus; Nijholt, A.

    2014-01-01

    In this short survey we have some historical notes about human-computer interface development with an emphasis on interface technology that has allowed us to design playful interactions with applications. The applications do not necessarily have to be entertainment applications. We can have playful

  1. Det æstetiske interface

    DEFF Research Database (Denmark)

    Andersen, Christian Ulrik

    2006-01-01

    Afhandlingen undersøger computerspillet historisk, teoretisk og analytisk i relation til en interfaceproblematik. Computerspil ses som et fremtrædende eksempel på det æstetiske interface – et interface baseret på sanseoplevelse i stedet for pragmatisk anvendelse. Afhandlingen består af to indbyrd...

  2. GRAPHIC INTERFACES FOR ENGINEERING APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Ion PANA,

    2012-05-01

    Full Text Available Using effective the method of calculating Fitness for Service requires the achievement of graphical interfaces. This paper presents an example of such interfaces, made with Visual Basic program and used in the evaluation of pipelines in a research contract [4

  3. Modeling soft interface dominated systems

    NARCIS (Netherlands)

    Lamorgese, A.; Mauri, R.; Sagis, L.M.C.

    2017-01-01

    The two main continuum frameworks used for modeling the dynamics of soft multiphase systems are the Gibbs dividing surface model, and the diffuse interface model. In the former the interface is modeled as a two dimensional surface, and excess properties such as a surface density, or surface energy

  4. Human-machine interface upgrade

    International Nuclear Information System (INIS)

    Kropik, M.; Matejka, K.; Sklenka, L.; Chab, V.

    2002-01-01

    The article describes a new human-machine interface that was installed at the VR-1 training reactor. The human-machine interface upgrade was completed in the summer 2001. The interface was designed with respect to functional, ergonomic and aesthetic requirements. The interface is based on a personal computer equipped with two displays. One display enables alphanumeric communication between the reactor operator and the nuclear reactor I and C. The second display is a graphical one. It presents the status of the reactor, principal parameters (as power, period), control rods positions, course of the reactor power. Furthermore, it is possible to set parameters, to show the active core configuration, to perform reactivity calculations, etc. The software for the new human-machine interface was produced with the InTouch developing tool of the Wonder-Ware Company. It is possible to switch the language of the interface between Czech and English because of many foreign students and visitors to the reactor. Microcomputer based communication units with proper software were developed to connect the new human-machine interface with the present reactor I and C. The new human-machine interface at the VR-1 training reactor improves the comfort and safety of the reactor utilisation, facilitates experiments and training, and provides better support for foreign visitors. (orig.)

  5. Preface (to Playful User Interfaces)

    NARCIS (Netherlands)

    Unknown, [Unknown; Nijholt, A.; Nijholt, Antinus

    2014-01-01

    This book is about user interfaces to applications that can be considered as ‘playful’. The interfaces to such applications should be ‘playful’ as well. The application should be fun, and interacting with such an application should, of course, be fun as well. Maybe more. Why not expect that the

  6. New DOMS interface

    International Nuclear Information System (INIS)

    Aoki, Shigeki; Niwa, Kimio

    1984-01-01

    In Nagoya University, the computerized on-line microscope for emulsion analysis for cosmic ray research has been developed since 1973. In the past, the emulsion analysis with microscopes was based on specifically trained observation capability. However, it is indispensable to improve the analysis speed and objectivity by the automation with a computer. The emulsion analysis system in Nagoya University completed in 1978 is composed of more than one DOMS (digitized on-line microscope) which is a Chiyoda microscope with a DC motor and a linear encoder and large and medium size precise stages produced by Mitaka Koki Co. The system is linked with a host computer through controllers. Each measuring terminal operates as an intelligent terminal connected with a serial line. A new DOMS interface is newly designed by standardizing the above controllers, and intended to make the same programs easy to use for the purpose of equalizing the quality of data. Design work premised on the assumption that users can set up systems by combining necessary modules depending on their purposes by packing hardware into modules for every function, following the CAMAC concept. In this report, the total system configuration, crate controller, motor drive, position counter, display, graphic video RAM and ROM writer are described. (Wakatsuki, Y.)

  7. ATLAS Detector Interface Group

    CERN Multimedia

    Mapelli, L

    Originally organised as a sub-system in the DAQ/EF-1 Prototype Project, the Detector Interface Group (DIG) was an information exchange channel between the Detector systems and the Data Acquisition to provide critical detector information for prototype design and detector integration. After the reorganisation of the Trigger/DAQ Project and of Technical Coordination, the necessity to provide an adequate context for integration of detectors with the Trigger and DAQ lead to organisation of the DIG as one of the activities of Technical Coordination. Such an organisation emphasises the ATLAS wide coordination of the Trigger and DAQ exploitation aspects, which go beyond the domain of the Trigger/DAQ project itself. As part of Technical Coordination, the DIG provides the natural environment for the common work of Trigger/DAQ and detector experts. A DIG forum for a wide discussion of all the detector and Trigger/DAQ integration issues. A more restricted DIG group for the practical organisation and implementation o...

  8. Accelerator-TEM interface facility and application

    International Nuclear Information System (INIS)

    Liu Chuansheng; Li Ming; He Jun; Yang Zheng; Zhou Lin; Wang Zesong; Guo Liping; Jiang Changzhong; Yang Shibo; Fu Dejun; Fan Xiangjun; Liu Jiarui; Lee J C

    2010-01-01

    An accelerator-TEM interface facility has been established at Wuhan University in 2008. The system consists of an H800 TEM linked to a 200 kV ion implanter and a 2 x 1.7 MV tandem accelerator. Nitrogen ions at 115 keV were successfully transported from the implanter into the TEM chamber through the interface system, and the ion currents measured at the entrance of the TEM column were between 20 and 180 nA. Structural evolution caused by ion irradiation in Si, GaAs, nanocrystal Ag was observed in situ. The in situ observation showed that the critical implantation dose for amorphization of Si is 10 14 cm -2 . The nuclear material C276 samples implanted with 115 keV Ar + was also studied, and dislocation loops sized at 3-12 nm were clearly observed after implantation to doses of over 1 x 10 15 cm -2 . The density of the loops increased with the dose. Evolution to polycrystalline and amorphous structures were observed at 5 x l0 15 cm -2 and 3 x 10 16 cm -2 , respectively. An in situ RBS/C chamber was installed on the transport line of the accelerator-TEM interface system. This enables in situ measurement of composition and location of the implanted species in lattice of the samples. In addition, a 50 kV low-energy gaseous ion generator was installed close to the TEM chamber, which facilitates in situ TEM observation of helium bubbles formed in helium-implanted materials. (authors)

  9. Polymers at Surfaces and Interfaces

    Science.gov (United States)

    Tsige, Mesfin

    2015-03-01

    Interfaces between solids, liquids, and gases play an important role in a wide range of practical applications and have been a subject of scientific interest since Poisson showed in 1831 that the order parameter of liquids near interfaces must deviate considerably from its bulk value. In particular, polymers at surfaces and interfaces have been a subject of extensive theoretical, experimental and computational studies for a long time due to their use in many diverse applications ranging from antifouling coatings to flexible electronic devices. Understanding the structure and thermodynamic properties of polymers at surfaces and interfaces is thus an area of fundamental and current technological interest. Although encouraging experimental progress has been made over the years in understanding the molecular structure of polymers in contact with various environments, selectively probing their structure and dynamics at surfaces and interfaces has been extremely difficult. Computer simulations, especially molecular dynamics (MD) simulations, have proven over the years to be an invaluable tool in providing molecular details at interfaces that are usually lacking in the experimental data. In this talk, I'll give an overview of some previous simulation efforts to understand the structure and dynamics of polymers at surfaces and buried interfaces. I will conclude by presenting our current and ongoing work on combining ab initio calculations and MD simulations with Sum Frequency Generation (SFG) Spectroscopy to study polymer surfaces. This approach demonstrates the future role of MD in surface science. Work supported by NSF (DMR0847580 and DMR1410290) and Petroleum Research Fund of the American Chemical Society.

  10. Nanoparticle Assemblies at Fluid Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Thomas P. [Univ. of Massachusetts, Amherst, MA (United States). Dept. of Polymer Science and Engineering

    2015-03-10

    A systematic study of the structure and dynamics of nanoparticles (NP) and NP-surfactants was performed. The ligands attached to both the NPs and NP-surfactants dictate the manner in which the nanoscopic materials assemble at fluid interfaces. Studies have shown that a single layer of the nanoscpic materials form at the interface to reduce the interactions between the two immiscible fluids. The shape of the NP is, also, important, where for spherical particles, a disordered, liquid-like monolayer forms, and, for nanorods, ordered domains at the interface is found and, if the monolayers are compressed, the orientation of the nanorods with respect to the interface can change. By associating end-functionalized polymers to the NPs assembled at the interface, NP-surfactants are formed that increase the energetic gain in segregating each NP at the interface which allows the NP-surfactants to jam at the interface when compressed. This has opened the possibility of structuring the two liquids by freezing in shape changes of the liquids.

  11. Through the Interface - a human activity approach to user interfaces

    DEFF Research Database (Denmark)

    Bødker, Susanne

    In providing a theoretical framework for understanding human- computer interaction as well as design of user interfaces, this book combines elements of anthropology, psychology, cognitive science, software engineering, and computer science. The framework examines the everyday work practices of us...

  12. Playful user interfaces interfaces that invite social and physical interaction

    CERN Document Server

    2014-01-01

    The book is about user interfaces to applications that have been designed for social and physical interaction. The interfaces are ‘playful’, that is, users feel challenged to engage in social and physical interaction because that will be fun. The topics that will be present in this book are interactive playgrounds, urban games using mobiles, sensor-equipped environments for playing, child-computer interaction, tangible game interfaces, interactive tabletop technology and applications, full-body interaction, exertion games, persuasion, engagement, evaluation, and user experience. Readers of the book will not only get a survey of state-of-the-art research in these areas, but the chapters in this book will also provide a vision of the future where playful interfaces will be ubiquitous, that is, present and integrated in home, office, recreational, sports and urban environments, emphasizing that in the future in these environments game elements will be integrated and welcomed.

  13. The molecule-metal interface

    CERN Document Server

    Koch, Norbert; Wee, Andrew Thye Shen

    2013-01-01

    Reviewing recent progress in the fundamental understanding of the molecule-metal interface, this useful addition to the literature focuses on experimental studies and introduces the latest analytical techniques as applied to this interface.The first part covers basic theory and initial principle studies, while the second part introduces readers to photoemission, STM, and synchrotron techniques to examine the atomic structure of the interfaces. The third part presents photoelectron spectroscopy, high-resolution UV photoelectron spectroscopy and electron spin resonance to study the electroni

  14. Molecular characterization of composite interfaces

    International Nuclear Information System (INIS)

    Ishida, H.

    1982-01-01

    The Fourier Transform Infrared Spectroscopy was applied to elucidate the molecular structures of the glass/matrix interface. The various interfaces and interphases were studied. It is found that the structure of the silane in a treating solution is important in determining the structure of the silane on glass fibers, influences the macroscopic properties of composites. The amount of silane on glass fibers, the state of hydrogen bonding, orientation, copolymerization of the organicfunctionality with the matrix, curing of the silane, and effect of water on the interface were investigated. It is shown that the molecular approach is useful to interpret and predict physicomechanical properties of composites

  15. Search-User Interface Design

    CERN Document Server

    Wilson, Max

    2011-01-01

    Search User Interfaces (SUIs) represent the gateway between people who have a task to complete, and the repositories of information and data stored around the world. Not surprisingly, therefore, there are many communities who have a vested interest in the way SUIs are designed. There are people who study how humans search for information, and people who study how humans use computers. There are people who study good user interface design, and people who design aesthetically pleasing user interfaces. There are also people who curate and manage valuable information resources, and people who desi

  16. Interfaces and thin films physics

    International Nuclear Information System (INIS)

    Equer, B.

    1988-01-01

    The 1988 progress report of the Interfaces and Thin Film Physics laboratory (Polytechnic School France) is presented. The research program is focused on the thin films and on the interfaces of the amorphous semiconductor materials: silicon and silicon germanium, silicon-carbon and silicon-nitrogen alloys. In particular, the following topics are discussed: the basic processes and the kinetics of the reactive gas deposition, the amorphous materials manufacturing, the physico-chemical characterization of thin films and interfaces and the electron transport in amorphous semiconductors. The construction and optimization of experimental devices, as well as the activities concerning instrumentation, are also described [fr

  17. Designing end-user interfaces

    CERN Document Server

    Heaton, N

    1988-01-01

    Designing End-User Interfaces: State of the Art Report focuses on the field of human/computer interaction (HCI) that reviews the design of end-user interfaces.This compilation is divided into two parts. Part I examines specific aspects of the problem in HCI that range from basic definitions of the problem, evaluation of how to look at the problem domain, and fundamental work aimed at introducing human factors into all aspects of the design cycle. Part II consists of six main topics-definition of the problem, psychological and social factors, principles of interface design, computer intelligenc

  18. Practical speech user interface design

    CERN Document Server

    Lewis, James R

    2010-01-01

    Although speech is the most natural form of communication between humans, most people find using speech to communicate with machines anything but natural. Drawing from psychology, human-computer interaction, linguistics, and communication theory, Practical Speech User Interface Design provides a comprehensive yet concise survey of practical speech user interface (SUI) design. It offers practice-based and research-based guidance on how to design effective, efficient, and pleasant speech applications that people can really use. Focusing on the design of speech user interfaces for IVR application

  19. Dispersive transport across interfaces

    Science.gov (United States)

    Berkowitz, Brian; Adler, Pierre

    2015-04-01

    Experiments demonstrating asymmetrical dispersive transport of a conservative tracer across interfaces between different porous materials have recently been performed. Here, this phenomenon is studied numerically on the pore scale. The flow field is derived by solving the Stokes equation. The dispersive transport is simulated by a large number of particles undergoing random walks under the simultaneous action of convection and diffusion. Two main two-dimensional configurations are studied; each consists of two segments (called coarse and fine) with the same structure, porosity, and length along the main flow, but different characteristic solid/pore sizes. One structure consists of two channels containing cavities of different sizes, and the second of square "grains" of different sizes. At time t=0, a large number of particles is injected (as a pulse) around a given cross-section. The corresponding breakthrough curves (BTCs) are registered as functions of time at six different cross sections. Calculations are made twice; in the first case (CtoF), particles are injected in the coarse side and are transported towards the fine one; in the second one (FtoC), the opposite case is studied. These calculations are performed for various Péclet numbers (Pe). Comparison of the resulting BTCs shows features that are similar to experimental observations, but with qualitative and quantitative differences. The influences of the medium, of the injection and observation planes, and of Pe are detailed and discussed. A BTC for pulse injection can be characterized by its maximum M(t_M) and the time tM at which it occurs. The observed differences for channels bounded by cavities are very small. However for the granular structures, M(t_M) is always larger for FtoC than for CtoF ; tM depends on all the parameters, namely Pe, the size ratio between the large and small grains, the injection and the observation planes. The numerical results are systematically compared with solutions of one

  20. A comparison of sodium and hydrogen halides at the air-water interface

    Science.gov (United States)

    Wick, Collin D.

    2017-10-01

    New molecular models, parameterized to ab initio calculations, were developed to describe HBr and HI at the air-water interface. These were used to compare how the air-water interface influenced dissociation of NaX and HX, with X being Cl, Br, or I, and also their propensity for the interface. The polarizable multistate empirical valence bond method, which explicitly describes proton sharing, was used to model HX. Results showed that the air-water interface suppressed HX dissociation from a contact ion pair to a solvent separated to a greater degree than NaX dissociation. Furthermore, HX had a greater propensity for the interface than NaX, which was a consequence of the hydronium ion having a greatest interfacial activity of all species studied. As a consequence of this, the average configuration of dissociated HX, while in both contact ion and solvent separated ion pairs near the air-water interface, is with the dissociated hydrogen oriented more towards the air than the X atom.

  1. Optoelectronics Interfaces for Power Converters

    Directory of Open Access Journals (Sweden)

    Ovidiu Neamtu

    2009-05-01

    Full Text Available The most important issue interface is galvanicseparation between the signal part and the power board.Standards in the field have increased continuouslyelectro-security requirements on the rigidity of thedielectric and insulation resistance. Recommendations forclassical solutions require the use of galvanic separationoptoelectronics devices. Interfacing with a PC or DSP -controller is a target of interposition optical signals viathe power hardware commands.

  2. Fluid mechanics of environmental interfaces

    CERN Document Server

    Gualtieri, Carlo

    2008-01-01

    Fluid Mechanics of Environmental Interfaces describes the concept of the environmental interface, defined as a surface between two either abiotic or biotic systems. These are in relative motion and exchange mass, heat and momentum through biophysical and/or chemical processes. These processes are fluctuating temporally and spatially.The book will be of interest to graduate students, PhD students as well as researchers in environmental sciences, civil engineering and environmental engineering, (geo)physics and applied mathematics.

  3. Electronic structure of semiconductor interfaces

    International Nuclear Information System (INIS)

    Herman, F.

    1983-01-01

    The study of semiconductor interfaces is one of the most active and exciting areas of current semiconductor research. Because interfaces play a vital role in modern semiconductor technology (integrated circuits, heterojunction lasers, solar cells, infrared detectors, etc.), there is a strong incentive to understand interface properties at a fundamental level and advance existing technology thereby. At the same time, technological advances such as molecular beam epitaxy have paved the way for the fabrication of semiconductor heterojunctions and superlattices of novel design which exhibit unusual electronic, optical, and magnetic properties and offer unique opportunities for fundamental scientific research. A general perspective on this subject is offered treating such topics as the atomic and electronic structure of semiconductor surfaces and interfaces; oxidation and oxide layers; semiconductor heterojunctions and superlattices; rectifying metal-semiconductor contacts; and interface reactions. Recent progress is emphasized and some future directions are indicated. In addition, the role that large-scale scientific computation has played in furthering our theoretical understanding of semiconductor surfaces and interfaces is discussed. Finally, the nature of theoretical models, and the role they play in describing the physical world is considered. (Author) [pt

  4. Active matter clusters at interfaces.

    Directory of Open Access Journals (Sweden)

    Katherine eCopenhagen

    2016-03-01

    Full Text Available Collective and directed motility or swarming is an emergent phenomenon displayed by many self-organized assemblies of active biological matter such as clusters of embryonic cells during tissue development, cancerous cells during tumor formation and metastasis, colonies of bacteria in a biofilm, or even flocks of birds and schools of fish at the macro-scale. Such clusters typically encounter very heterogeneous environments. What happens when a cluster encounters an interface between two different environments has implications for its function and fate. Here we study this problem by using a mathematical model of a cluster that treats it as a single cohesive unit that moves in two dimensions by exerting a force/torque per unit area whose magnitude depends on the nature of the local environment. We find that low speed (overdamped clusters encountering an interface with a moderate difference in properties can lead to refraction or even total internal reflection of the cluster. For large speeds (underdamped, where inertia dominates, the clusters show more complex behaviors crossing the interface multiple times and deviating from the predictable refraction and reflection for the low velocity clusters. We then present an extreme limit of the model in the absence of rotational damping where clusters can become stuck spiraling along the interface or move in large circular trajectories after leaving the interface. Our results show a wide range of behaviors that occur when collectively moving active biological matter moves across interfaces and these insights can be used to control motion by patterning environments.

  5. Science at the interface

    International Nuclear Information System (INIS)

    Knorr Cetina, K.

    2004-01-01

    the stakes against those who might want to enter. Laboratory sciences interface nature in a peculiar way: by barring real natural objects from entering the lab and by substituting for them reconfigured versions of these objects to work with in research. These supplemental versions of natural objects do refer back to natural processes or conditions, but at the same time they are also autonomous new objects and processes with differential qualities and reproductive powers within laboratory contexts. Laboratory sciences have the disadvantage that their products must be freshly contextualized when they leave the lab to reenter natural environments. In the natural sciences, re-contextualization is often accomplished by transferring some of the conditions that obtained in the lab onto the natural environment. Re-contextualization in the natural sciences may also just be a metaphor for a long chain of processes, involving specialized disciplines, by which some natural scientific results are used to create technologies which are then used in practice - a process that often fails, involves political strategies of persuasion and other complications. Contextualization involves adaptation not only to new laboratory external physical environments but also to the social world. One direction of social science research maintains that a form of (re) contextualization of a much larger scope and impact is evident today in contemporary societies, affecting in tendency all sciences and technological fields. This assessment is encapsulated in the idea that we have progressed from Mode 1 science and technology to a Mode 2 situation where knowledge is generated in the context of application and implication. (author)

  6. DIRAC: Secure web user interface

    International Nuclear Information System (INIS)

    Casajus Ramo, A; Sapunov, M

    2010-01-01

    Traditionally the interaction between users and the Grid is done with command line tools. However, these tools are difficult to use by non-expert users providing minimal help and generating outputs not always easy to understand especially in case of errors. Graphical User Interfaces are typically limited to providing access to the monitoring or accounting information and concentrate on some particular aspects failing to cover the full spectrum of grid control tasks. To make the Grid more user friendly more complete graphical interfaces are needed. Within the DIRAC project we have attempted to construct a Web based User Interface that provides means not only for monitoring the system behavior but also allows to steer the main user activities on the grid. Using DIRAC's web interface a user can easily track jobs and data. It provides access to job information and allows performing actions on jobs such as killing or deleting. Data managers can define and monitor file transfer activity as well as check requests set by jobs. Production managers can define and follow large data productions and react if necessary by stopping or starting them. The Web Portal is build following all the grid security standards and using modern Web 2.0 technologies which allow to achieve the user experience similar to the desktop applications. Details of the DIRAC Web Portal architecture and User Interface will be presented and discussed.

  7. XML Translator for Interface Descriptions

    Science.gov (United States)

    Boroson, Elizabeth R.

    2009-01-01

    A computer program defines an XML schema for specifying the interface to a generic FPGA from the perspective of software that will interact with the device. This XML interface description is then translated into header files for C, Verilog, and VHDL. User interface definition input is checked via both the provided XML schema and the translator module to ensure consistency and accuracy. Currently, programming used on both sides of an interface is inconsistent. This makes it hard to find and fix errors. By using a common schema, both sides are forced to use the same structure by using the same framework and toolset. This makes for easy identification of problems, which leads to the ability to formulate a solution. The toolset contains constants that allow a programmer to use each register, and to access each field in the register. Once programming is complete, the translator is run as part of the make process, which ensures that whenever an interface is changed, all of the code that uses the header files describing it is recompiled.

  8. Repartition of ultrasonic energies at the interfaces

    International Nuclear Information System (INIS)

    Deleuze, M.; Bourdarios, M.; Lepoutre, M.

    1983-06-01

    Energy repartition of ultrasonic waves at the interfaces is studied as a function of incidence angle of the acoustic beam in immersion testing. For each interface type mathematical relations give the ratio of incident energy and energy of the wave reemitted by the interface. As an example curves for the interfaces water-uranium are given [fr

  9. Control by personal computer and Interface 1

    International Nuclear Information System (INIS)

    This book consists of three chapters. The first chapter deals with basic knowledge of micro computer control which are computer system, micro computer system, control of the micro computer and control system for calculator. The second chapter describes Interface about basic knowledge such as 8255 parallel interface, 6821 parallel interface, parallel interface of personal computer, reading BCD code in parallel interface, IEEE-488 interface, RS-232C interface and transmit data in personal computer and a measuring instrument. The third chapter includes control experiment by micro computer, experiment by eight bit computer and control experiment by machine code and BASIC.

  10. Multi-robot control interface

    Science.gov (United States)

    Bruemmer, David J [Idaho Falls, ID; Walton, Miles C [Idaho Falls, ID

    2011-12-06

    Methods and systems for controlling a plurality of robots through a single user interface include at least one robot display window for each of the plurality of robots with the at least one robot display window illustrating one or more conditions of a respective one of the plurality of robots. The user interface further includes at least one robot control window for each of the plurality of robots with the at least one robot control window configured to receive one or more commands for sending to the respective one of the plurality of robots. The user interface further includes a multi-robot common window comprised of information received from each of the plurality of robots.

  11. PinBus Interface Design

    Energy Technology Data Exchange (ETDEWEB)

    Hammerstrom, Donald J.; Adgerson, Jewel D.; Sastry, Chellury; Pratt, Richard M.; Pratt, Robert G.

    2009-12-30

    On behalf of the U.S. Department of Energy, PNNL has explored and expanded upon a simple control interface that might have merit for the inexpensive communication of smart grid operational objectives (demand response, for example) to small electric end-use devices and appliances. The approach relies on bi-directional communication via the electrical voltage states of from one to eight shared interconnection pins. The name PinBus has been suggested and adopted for the proposed interface protocol. The protocol is defined through the presentation of state diagrams and the pins’ functional definitions. Both simulations and laboratory demonstrations are being conducted to demonstrate the elegance and power of the suggested approach. PinBus supports a very high degree of interoperability across its interfaces, allowing innumerable pairings of devices and communication protocols and supporting the practice of practically any smart grid use case.

  12. Physics of Surfaces and Interfaces

    CERN Document Server

    Ibach, Harald

    2006-01-01

    This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. The Physics of Surfaces and Interfaces is designed as a handbook for the researcher as well as a study-text for graduate students in physics or chemistry with special interest in the surface sciences, material science, or the nanosciences. The experienced researcher, professional or academic teacher will appreciate the opportunity to share many insights and ideas that have grown out of the author's long experience. Readers will likewise appreciate the wide range of topics treated, each supported by extensive references. Graduate students will benefit f...

  13. Interface control scheme for computer high-speed interface unit

    Science.gov (United States)

    Ballard, B. K.

    1975-01-01

    Control scheme is general and performs for multiplexed and dedicated channels as well as for data-bus interfaces. Control comprises two 64-pin, dual in-line packages, each of which holds custom large-scale integrated array built with silicon-on-sapphire complementary metal-oxide semiconductor technology.

  14. Interface language for diagnostic control

    International Nuclear Information System (INIS)

    Matone, J.T.

    1985-01-01

    The neutron multichannel collimator diagnostic on TFTR is run with the help of a keyboard-entered interface language. The language allows the user to interact with the real-time control and data analysis systems in a consistent and efficient manner. It uses a vocabulary that can be abbreviated into one character commands which the proficient user may concatenate into command words. This allows the user to progress quickly from a novice to an expert operating mode. A similar type interface language could be applied to many interactive applications accepting keyboard inputs

  15. Polymers and biopolymers at interfaces

    Science.gov (United States)

    Hall, A. R.; Geoghegan, M.

    2018-03-01

    This review updates recent progress in the understanding of the behaviour of polymers at surfaces and interfaces, highlighting examples in the areas of wetting, dewetting, crystallization, and ‘smart’ materials. Recent developments in analysis tools have yielded a large increase in the study of biological systems, and some of these will also be discussed, focussing on areas where surfaces are important. These areas include molecular binding events and protein adsorption as well as the mapping of the surfaces of cells. Important techniques commonly used for the analysis of surfaces and interfaces are discussed separately to aid the understanding of their application.

  16. Coordinating user interfaces for consistency

    CERN Document Server

    Nielsen, Jakob

    2001-01-01

    In the years since Jakob Nielsen's classic collection on interface consistency first appeared, much has changed, and much has stayed the same. On the one hand, there's been exponential growth in the opportunities for following or disregarding the principles of interface consistency-more computers, more applications, more users, and of course the vast expanse of the Web. On the other, there are the principles themselves, as persistent and as valuable as ever. In these contributed chapters, you'll find details on many methods for seeking and enforcing consistency, along with bottom-line analys

  17. The interface at the skin

    DEFF Research Database (Denmark)

    Hansen, Lone Koefoed

    2011-01-01

    In the development of and discourses around interfaces there has always been a strong urge to bypass representation and ‘jack’ directly in to the human brain, consciousness, perceptions and feelings. In her article ”The interface at the skin” Lone Koefoed Hansen looks at how two contemporary...... computing is the newest example of a technological development implicitly or explicitly aiming at manifesting two utopian parameters of communication: immediacy and instantaneity. Though utopian, this manifestation has served as a way to brand Philips “as a highly innovative and remarkable company”....

  18. Interfacing robotics with plutonium fuel fabrication

    International Nuclear Information System (INIS)

    Bowen, W.W.; Moore, F.W.

    1986-01-01

    Interfacing robotic systems with nuclear fuel fabrication processes resulted in a number of interfacing challenges. The system not only interfaces with the fuel process, but must also interface with nuclear containment, radiation control boundaries, criticality control restrictions, and numerous other safety systems required in a fuel fabrication plant. The robotic system must be designed to allow operator interface during maintenance and recovery from an upset as well as normal operations

  19. Accelerator-tem interface facility and application

    International Nuclear Information System (INIS)

    Li Ming; He Jun; Yang Zheng; Zhou Lin; Liu Chuansheng; Guo Liping; Jiang Changzhong; Yang Shibo; Fu Dejun; Fan Xiangjun; Liu Jiarui; Lee, J.C.

    2010-01-01

    An accelerator-TEM interface facility has been established at Wuhan University. The system consists of an H800 TEM linked to a 200 kV ion implanter and a 2 x 1.7 MV tandetron accelerator. Measures were taken to isolate the TEM from mechanical vibration transmitted from the ion beam lines and good resolution was maintained with the TEM machine when operated under high zoom modes during the ion implantation. Nitrogen ions at 115 keV were successfully transported from the implanter into the TEM chamber through the interface system, and the ion currents measured at the entrance of the TEM column were between 20 and 180 nA. Structural evolution caused by ion irradiation in Si, GaAs, nanocrystal Ag were observed in situ. The TEM sample could be tilted by 52 degree and for low energy ion irradiation, real time observation was realized. The in situ observation showed that the critical implant dose for amorphization of Si is 2 x 10 14 cm -2 and it became fully amorphized at 3 x 10 15 cm -2 . Amorphization of GaAs started at 1 x 10 14 cm -2 , whereas for nanocrystal Ag, the starting dose was 6 x 10 14 cm -2 . The nuclear material C276 samples implanted with 115 keV Ar+ was also studied and dislocation loops with sizes of 3-12 nm were clearly observed after implantation to doses higher than 1 x 10 15 cm -2 . The density of the loops increased with the increase in the implant dose and evolution to polycrystalline and amorphous structures were observed at 5 x 10 15 cm -2 and 3 x 10 16 cm -2 , respectively. An in situ RBS/C chamber has been installed on the transport line of the accelerator-TEM interface system. This makes it possible to in situ measure composition and location of impurities in the lattice of the implanted samples. In addition, a 50 kV low-energy gaseous ion generator was installed close to the TEM chamber, which facilitates in situ TEM observation of helium bubbles formed in materials by helium implantation. (authors)

  20. BASIN: Beowulf Analysis Symbolic INterface

    Science.gov (United States)

    Vesperini, Enrico; Goldberg, David M.; McMillan, Stephen L. W.; Dura, James; Jones, Douglas

    2013-08-01

    BASIN (Beowulf Analysis Symbolic INterface) is a flexible, integrated suite of tools for multiuser parallel data analysis and visualization that allows researchers to harness the power of Beowulf PC clusters and multi-processor machines without necessarily being experts in parallel programming. It also includes general tools for data distribution and parallel operations on distributed data for developing libraries for specific tasks.

  1. Embodied agents in de interface

    NARCIS (Netherlands)

    Evers, M.J.; Nijholt, Antinus

    2001-01-01

    Steeds meer zien we het gebruik van mensachtige, geanimeerde figuren in interfaces en andere software applicaties, niet alleen in onderzoeksprojecten maar ook in commerciële software. Een voorbeeld dat bijna iedereen wel kent (en waar velen wel wat op aan te merken hebben) is de ‘office assistant’

  2. Control system oriented human interface

    International Nuclear Information System (INIS)

    Barale, P.; Jacobson, V.; Kilgore, R.; Rondeau, D.

    1976-11-01

    The on-line control system interface for magnet beam steering and focusing in the Bevalac is described. An Aydin model 5205B display generator was chosen. This display generator will allow the computer to completely rewrite a monitor screen in less than 50 ms and is also capable of controlling a color monitor

  3. Interface engineering for organic electronics

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Hong; Yip, Hin-Lap; Jen, Alex K.Y. [Department of Materials Science and Engineering, University of Washington, Seattle, WA (United States); Huang, Fei [Department of Materials Science and Engineering, University of Washington, Seattle, WA (United States); Institute of Polymer Optoelectronic Materials and Devices College of Materials Science and Engineering, South China University of Technology Guangzhou (China)

    2010-05-10

    The field of organic electronics has been developed vastly in the past two decades due to its promise for low cost, lightweight, mechanical flexibility, versatility of chemical design and synthesis, and ease of processing. The performance and lifetime of these devices, such as organic light-emitting diodes (OLEDs), photovoltaics (OPVs), and field-effect transistors (OFETs), are critically dependent on the properties of both active materials and their interfaces. Interfacial properties can be controlled ranging from simple wettability or adhesion between different materials to direct modifications of the electronic structure of the materials. In this Feature Article, the strategies of utilizing surfactant-modified cathodes, hole-transporting buffer layers, and self-assembled monolayer (SAM)-modified anodes are highlighted. In addition to enabling the production of high-efficiency OLEDs, control of interfaces in both conventional and inverted polymer solar cells is shown to enhance their efficiency and stability; and the tailoring of source-drain electrode-semiconductor interfaces, dielectric-semiconductor interfaces, and ultrathin dielectrics is shown to allow for high-performance OFETs. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  4. Spelling Correction in User Interfaces.

    Science.gov (United States)

    1982-12-20

    we have concluded that there are considerable benefits and few obstacles to providing a spelling corrector in almost any interactie user interface. Key...the ACAI 23, 12 (December 1980), 676-687. 8. John F. Reiser (ed.). SAIL Manual. Stanford University Computer Science Department, 1976. 9. Warren

  5. A Portable Natural Language Interface.

    Science.gov (United States)

    1987-09-01

    and that would integrate graphics, mouse deixis , and natural language. Although the project was originally intended to last several years, it has been...planning program, an expert system used to plan air attack missions for the Air Force. This interface combined English with graphics and mouse deixis

  6. Adhesive forces at bimetallic interfaces

    International Nuclear Information System (INIS)

    Das, M.P.; Nafari, N.; Ziesche, P.; Kaschner, H.R.

    1987-03-01

    Force concepts in condensed systems have progressed significantly in recent years. In the context of bimetallic interfaces we consider the Pauli-Hellman-Feynman theorem, use it to check the variational calculations of interfacial energies and estimate the force constants. (author). 13 refs, 2 figs, 2 tabs

  7. Web OPAC Interfaces: An Overview.

    Science.gov (United States)

    Babu, B. Ramesh; O'Brien, Ann

    2000-01-01

    Discussion of Web-based online public access catalogs (OPACs) focuses on a review of six Web OPAC interfaces in use in academic libraries in the United Kingdom. Presents a checklist and guidelines of important features and functions that are currently available, including search strategies, access points, display, links, and layout. (Author/LRW)

  8. Interface design for digital courses

    NARCIS (Netherlands)

    Tabbers, Huib; Kester, Liesbeth; Hummel, Hans; Nadolski, Rob

    2005-01-01

    This text should be referred to as: Tabbers, H., Kester, L., Hummel, H. G. K., & Nadolski, R. J. (2003). Interface design for digital courses. In W. Jochems, J. van Merriënboer, & R. Koper (Eds). Integrated e-learning: implications for pedagogy, technology & organisation (pp. 100-111). London:

  9. Usability of Nomadic User Interfaces

    NARCIS (Netherlands)

    Dees, W.

    2011-01-01

    During the last decade, a number of research activities have been performed to enable user interfaces and the underlying user activities to be migrated from one device to another. We call this “Nomadic User Interfaces”. The primary goal of these research activities has been to develop the

  10. Wheel/rail interface optimisation

    NARCIS (Netherlands)

    Shevtsov, I.Y.

    2008-01-01

    In this thesis, wheel/rail interface optimisation, and particularly the problems of wheel and rail profile design are considered. The research task pursued by this thesis engenders investigation of a range of problems. First, geometric properties of contact between wheel and rail are investigated.

  11. An Object -Based VRML Interface

    Science.gov (United States)

    Araya, Shinji; Suzaki, Kenichi; Miyake, Yoshihiro

    This paper proposes an object-based VRML interface that can reduce the burden of both users and developers. In order to automatically generate the object menu, a new VRML node type that defines the names of objects in a scene graph is introduced together with the methods for real-time control of an active viewpoint node.

  12. The steel–concrete interface

    DEFF Research Database (Denmark)

    Angst, Ueli M.; Geiker, Mette Rica; Michel, Alexander

    2017-01-01

    Although the steel–concrete interface (SCI) is widely recognized to influence the durability of reinforced concrete, a systematic overview and detailed documentation of the various aspects of the SCI are lacking. In this paper, we compiled a comprehensive list of possible local characteristics...

  13. Emotional Brain-Computer Interfaces

    NARCIS (Netherlands)

    Garcia Molina, G.; Nijholt, A.; Nijholt, Antinus; Tsoneva, T.; Heylen, Dirk K.J.; Heylen, D.K.J.

    2013-01-01

    Research in brain-computer interface (BCI) has significantly increased during the last few years. Additionally to their initial role as assisting devices for the physically challenged, BCIs are now proposed for a wider range of applications. As any human-machine interaction system, BCIs can benefit

  14. Robust Brain-Computer Interfaces

    NARCIS (Netherlands)

    Reuderink, B.

    2011-01-01

    A brain-computer interface (BCI) enables direct communication from the brain to devices, bypassing the traditional pathway of peripheral nerves and muscles. Current BCIs aimed at patients require that the user invests weeks, or even months, to learn the skill to intentionally modify their brain

  15. Human-computer interface design

    Energy Technology Data Exchange (ETDEWEB)

    Bowser, S.E.

    1995-04-01

    Modern military forces assume that computer-based information is reliable, timely, available, usable, and shared. The importance of computer-based information is based on the assumption that {open_quotes}shared situation awareness, coupled with the ability to conduct continuous operations, will allow information age armies to observe, decide, and act faster, more correctly and more precisely than their enemies.{close_quotes} (Sullivan and Dubik 1994). Human-Computer Interface (HCI) design standardization is critical to the realization of the previously stated assumptions. Given that a key factor of a high-performance, high-reliability system is an easy-to-use, effective design of the interface between the hardware, software, and the user, it follows logically that the interface between the computer and the military user is critical to the success of the information-age military. The proliferation of computer technology has resulted in the development of an extensive variety of computer-based systems and the implementation of varying HCI styles on these systems. To accommodate the continued growth in computer-based systems, minimize HCI diversity, and improve system performance and reliability, the U.S. Department of Defense (DoD) is continuing to adopt interface standards for developing computer-based systems.

  16. Vantagens e desvantagens da interface Android: estudo de caso ROM

    Directory of Open Access Journals (Sweden)

    Alan Alves Ferreira

    2015-06-01

    Full Text Available Ampliam-se o uso e a praticidade dos dispositivos móveis na vida das pessoas, tendo como características aparelhos cada vez mais robustos. Seguindo os avanços de hardware, o surgimento do Android marcou uma nova era na tecnologia móvel, abrindo as portas para novas possibilidades. Este artigo propõe a criação de uma interface personalizada para o Andróid, comparando-a com a versão de fábrica produzida por uma fabricante de renome no ramo de eletrônicos e apresenta as vantagens que podem se seguir em termos de eficiência e uso de recursos sem afetar o desempenho e nem a praticidade no uso do dispositivo.

  17. A serendipidade na medicina e na anestesiologia

    OpenAIRE

    Vale, Nilton Bezerra do; Delfino, José; Vale, Lúcio Flávio Bezerra do

    2005-01-01

    JUSTIFICATIVA E OBJETIVOS: Neste trabalho foram examinados mais de uma centena dos mais felizes acoplamentos de uma mente brilhante com a sorte benfazeja (serendipidade), através da releitura das mais relevantes histórias sobre invenções e descobertas relacionadas à ciência (n = 46), à Medicina (n = 46) e à Anestesiologia (n = 16). CONTEÚDO: Conceito de serendipidade; exemplos célebres de serendipidade em Ciência e Tecnologia; serendipidade na pesquisa e prática médicas; serendipidade na Anes...

  18. Ionic Structure at Dielectric Interfaces

    Science.gov (United States)

    Jing, Yufei

    The behavior of ions in liquids confined between macromolecules determines the outcome of many nanoscale assembly processes in synthetic and biological materials such as colloidal dispersions, emulsions, hydrogels, DNA, cell membranes, and proteins. Theoretically, the macromolecule-liquid boundary is often modeled as a dielectric interface and an important quantity of interest is the ionic structure in a liquid confined between two such interfaces. The knowledge gleaned from the study of ionic structure in such models can be useful in several industrial applications, such as biosensors, lithium-ion batteries double-layer supercapacitors for energy storage and seawater desalination. Electrostatics plays a critical role in the development of such functional materials. Many of the functions of these materials, result from charge and composition heterogeneities. There are great challenges in solving electrostatics problems in heterogeneous media with arbitrary shapes because electrostatic interactions remains unknown but depend on the particular density of charge distributions. Charged molecules in heterogeneous media affect the media's dielectric response and hence the interaction between the charges is unknown since it depends on the media and on the geometrical properties of the interfaces. To determine the properties of heterogeneous systems including crucial effects neglected in classical mean field models such as the hard core of the ions, the dielectric mismatch and interfaces with arbitrary shapes. The effect of hard core interactions accounts properly for short range interactions and the effect of local dielectric heterogeneities in the presence of ions and/or charged molecules for long-range interactions are both analyzed via an energy variational principle that enables to update charges and the medium's response in the same simulation time step. In particular, we compute the ionic structure in a model system of electrolyte confined by two planar dielectric

  19. MIB Galerkin method for elliptic interface problems.

    Science.gov (United States)

    Xia, Kelin; Zhan, Meng; Wei, Guo-Wei

    2014-12-15

    Material interfaces are omnipresent in the real-world structures and devices. Mathematical modeling of material interfaces often leads to elliptic partial differential equations (PDEs) with discontinuous coefficients and singular sources, which are commonly called elliptic interface problems. The development of high-order numerical schemes for elliptic interface problems has become a well defined field in applied and computational mathematics and attracted much attention in the past decades. Despite of significant advances, challenges remain in the construction of high-order schemes for nonsmooth interfaces, i.e., interfaces with geometric singularities, such as tips, cusps and sharp edges. The challenge of geometric singularities is amplified when they are associated with low solution regularities, e.g., tip-geometry effects in many fields. The present work introduces a matched interface and boundary (MIB) Galerkin method for solving two-dimensional (2D) elliptic PDEs with complex interfaces, geometric singularities and low solution regularities. The Cartesian grid based triangular elements are employed to avoid the time consuming mesh generation procedure. Consequently, the interface cuts through elements. To ensure the continuity of classic basis functions across the interface, two sets of overlapping elements, called MIB elements, are defined near the interface. As a result, differentiation can be computed near the interface as if there is no interface. Interpolation functions are constructed on MIB element spaces to smoothly extend function values across the interface. A set of lowest order interface jump conditions is enforced on the interface, which in turn, determines the interpolation functions. The performance of the proposed MIB Galerkin finite element method is validated by numerical experiments with a wide range of interface geometries, geometric singularities, low regularity solutions and grid resolutions. Extensive numerical studies confirm the

  20. UNIVERSAL INTERFACE TO MULTIPLE OPERATIONS SYSTEMS

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    1986-01-01

    Alternative ways to provide access to operations systems that maintain, test, and configure complex telephone networks are being explored. It is suggested that a universal interface that provides simultaneous access to multiple operations systems that execute in different hardware and software...... environments, can be provided by an architecture that is based on the separation of presentation issues from application issues and on a modular interface management system that consists of a virtual user interface, physical user interface, and interface agent. The interface functionality that is needed...

  1. NA60 Status Report

    CERN Document Server

    Usai, G

    2010-01-01

    This report shortly summarizes the main results obtained from the analysis of the NA60 data during 2010, perspectives for the analysis activity during 2011 and the requests to CERN following from them. In addition, renewed interest is expressed for a possible continuation of NA60, including future running at lower SPS energies.

  2. ACPYPE - AnteChamber PYthon Parser interfacE

    Directory of Open Access Journals (Sweden)

    Sousa da Silva Alan W

    2012-07-01

    Full Text Available Abstract Background ACPYPE (or AnteChamber PYthon Parser interfacE is a wrapper script around the ANTECHAMBER software that simplifies the generation of small molecule topologies and parameters for a variety of molecular dynamics programmes like GROMACS, CHARMM and CNS. It is written in the Python programming language and was developed as a tool for interfacing with other Python based applications such as the CCPN software suite (for NMR data analysis and ARIA (for structure calculations from NMR data. ACPYPE is open source code, under GNU GPL v3, and is available as a stand-alone application at http://www.ccpn.ac.uk/acpype and as a web portal application at http://webapps.ccpn.ac.uk/acpype. Findings We verified the topologies generated by ACPYPE in three ways: by comparing with default AMBER topologies for standard amino acids; by generating and verifying topologies for a large set of ligands from the PDB; and by recalculating the structures for 5 protein–ligand complexes from the PDB. Conclusions ACPYPE is a tool that simplifies the automatic generation of topology and parameters in different formats for different molecular mechanics programmes, including calculation of partial charges, while being object oriented for integration with other applications.

  3. ACPYPE - AnteChamber PYthon Parser interfacE.

    Science.gov (United States)

    Sousa da Silva, Alan W; Vranken, Wim F

    2012-07-23

    ACPYPE (or AnteChamber PYthon Parser interfacE) is a wrapper script around the ANTECHAMBER software that simplifies the generation of small molecule topologies and parameters for a variety of molecular dynamics programmes like GROMACS, CHARMM and CNS. It is written in the Python programming language and was developed as a tool for interfacing with other Python based applications such as the CCPN software suite (for NMR data analysis) and ARIA (for structure calculations from NMR data). ACPYPE is open source code, under GNU GPL v3, and is available as a stand-alone application at http://www.ccpn.ac.uk/acpype and as a web portal application at http://webapps.ccpn.ac.uk/acpype. We verified the topologies generated by ACPYPE in three ways: by comparing with default AMBER topologies for standard amino acids; by generating and verifying topologies for a large set of ligands from the PDB; and by recalculating the structures for 5 protein-ligand complexes from the PDB. ACPYPE is a tool that simplifies the automatic generation of topology and parameters in different formats for different molecular mechanics programmes, including calculation of partial charges, while being object oriented for integration with other applications.

  4. Command Interface ASIC - Analog Interface ASIC Chip Set

    Science.gov (United States)

    Ruiz, Baldes; Jaffe, Burton; Burke, Gary; Lung, Gerald; Pixler, Gregory; Plummer, Joe; Katanyoutanant,, Sunant; Whitaker, William

    2003-01-01

    A command interface application-specific integrated circuit (ASIC) and an analog interface ASIC have been developed as a chip set for remote actuation and monitoring of a collection of switches, which can be used to control generic loads, pyrotechnic devices, and valves in a high-radiation environment. The command interface ASIC (CIA) can be used alone or in combination with the analog interface ASIC (AIA). Designed primarily for incorporation into spacecraft control systems, they are also suitable for use in high-radiation terrestrial environments (e.g., in nuclear power plants and facilities that process radioactive materials). The primary role of the CIA within a spacecraft or other power system is to provide a reconfigurable means of regulating the power bus, actuating all valves, firing all pyrotechnic devices, and controlling the switching of power to all switchable loads. The CIA is a mixed-signal (analog and digital) ASIC that includes an embedded microcontroller with supporting fault-tolerant switch control and monitoring circuitry that is capable of connecting to a redundant set of interintegrated circuit (I(sup 2)C) buses. Commands and telemetry requests are communicated to the CIA. Adherence to the I(sup 2)C bus standard helps to reduce development costs by facilitating the use of previously developed, commercially available components. The AIA is a mixed-signal ASIC that includes the analog circuitry needed to connect the CIA to a custom higher powered version of the I(sup 2)C bus. The higher-powered version is designed to enable operation with bus cables longer than those contemplated in the I(sup 2)C standard. If there are multiple higher-power I(sup 2)C-like buses, then there must an AIA between the CIA and each such bus. The AIA includes two identical interface blocks: one for the side-A I(sup 2)C clock and data buses and the other for the side B buses. All the AIAs on each side are powered from a common power converter module (PCM). Sides A and B

  5. Interface

    DEFF Research Database (Denmark)

    kulturhistoriske udviklingsfaser. Den tegner også et billede af, hvordan interfacet forandrer vores musikkultur, og hvordan de digitale kunstværker udfordrer vores økonomi og jura. Interfacet er vor tids drøm om gennemsigtighed, om at nå ind bag formidlingen. Det er dog også andet og mere end funktionel teknologi...

  6. Is structural interface standardization beneficial?

    Science.gov (United States)

    Dombert, W. E.

    1983-11-01

    Factors applicable to fixed angle, large field and fixed angle, large building flat plate photovoltaic (PV) generator arrays are discussed in the context of standardization. It is concluded that structural interface standardization may be highly desirable in any one major project, but not at this time in the overall PV industry. Attempts to mandate such standardization will act as a deterrent to long-range improvements. In specific projects, structural standardization should be defined at the largest practical interface, leaving the maximum possible freedom to the module and array manufacturer. There is a corollary area, however, where detailed standards would benefit the industry; the matter of Standard Practices. Work being done towards definition of acceptable/desirable practices in materials, finishes, fastening and locking methods, grounding techniques, lightning protection, etc., and in handling the environmental ranges, should be continued.

  7. Ultrafast Thermal Transport at Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Cahill, David [Univ. of Illinois, Champaign, IL (United States); Murphy, Catherine [Univ. of Illinois, Champaign, IL (United States); Martin, Lane [Univ. of Illinois, Champaign, IL (United States)

    2014-10-21

    Our research program on Ultrafast Thermal Transport at Interfaces advanced understanding of the mesoscale science of heat conduction. At the length and time scales of atoms and atomic motions, energy is transported by interactions between single-particle and collective excitations. At macroscopic scales, entropy, temperature, and heat are the governing concepts. Key gaps in fundamental knowledge appear at the transitions between these two regimes. The transport of thermal energy at interfaces plays a pivotal role in these scientific issues. Measurements of heat transport with ultrafast time resolution are needed because picoseconds are the fundamental scales where the lack of equilibrium between various thermal excitations becomes a important factor in the transport physics. A critical aspect of our work has been the development of experimental methods and model systems that enabled more precise and sensitive investigations of nanoscale thermal transport.

  8. Brookhaven fastbus/unibus interface

    International Nuclear Information System (INIS)

    Benenson, G.; Bauernfeind, J.; Larsen, R.C.

    1983-01-01

    A typical high energy physics experiment requires both a high speed data acquisition and processing system, for data collection and reduction; and a general purpose computer to handle further reduction, bookkeeping and mass storage. Broad differences in architecture, format or technology, will often exist between these two systems, and interface design can become a formidable task. The PDP-11 series minicomputer is widely used in physics research, and the Brookhaven FASTBUS is the only standard high speed data acquisition system which is fully implemented in a current high energy physics experiment. This paper will describe the design and operation of an interface between these two systems. The major issues are elucidated by a preliminary discussion on the basic principles of Bus Systems, and their application to Brookhaven FASTBUS and UNIBUS

  9. Nonequilibrium thermodynamics of an interface

    Science.gov (United States)

    Schweizer, Marco; Öttinger, Hans Christian; Savin, Thierry

    2016-05-01

    Interfacial thermodynamics has deep ramifications in understanding the boundary conditions of transport theories. We present a formulation of local equilibrium for interfaces that extends the thermodynamics of the "dividing surface," as introduced by Gibbs, to nonequilibrium settings such as evaporation or condensation. By identifying the precise position of the dividing surface in the interfacial region with a gauge degree of freedom, we exploit gauge-invariance requirements to consistently define the intensive variables for the interface. The model is verified under stringent conditions by employing high-precision nonequilibrium molecular-dynamics simulations of a coexisting vapor-liquid Lennard-Jones fluid. We conclude that the interfacial temperature is determined using the surface tension as a "thermometer," and it can be significantly different from the temperatures of the adjacent phases. Our findings lay foundations for nonequilibrium interfacial thermodynamics.

  10. Interfaces in ceramic nuclear fuels

    International Nuclear Information System (INIS)

    Reeve, K.D.

    Internal interfaces in all-ceramic dispersion fuels (such as these for HTGRs) are discussed for two classes: BeO-based dispersions, and coated particles for graphite-based fuels. The following points are made: (1) The strength of a two-phase dispersion is controlled by the weaker dispersed phase bonded to the matrix. (2) Differential expansion between two phases can be controlled by an intermediate buffer zone of low density. (3) A thin ceramic coating should be in compression. (4) Chemical reaction between coating and substrate and mass transfer in service should be minimized. The problems of the nuclear fuel designer are to develop coatings for fission product retention, and to produce radiation-resistant interfaces. 44 references, 18 figures

  11. Soft matter at aqueous interfaces

    CERN Document Server

    Liu, Yi

    2016-01-01

    This book covers the science of interfaces between an aqueous phase and a solid, another liquid or a gaseous phase, starting from the basic physical chemistry all the way to state-of-the-art research developments. Both experimental and theoretical methods are treated thanks to the contributions of a distinguished list of authors who are all active researchers in their respective fields. The properties of these interfaces are crucial for a wide variety of processes, products and biological systems and functions, such as the formulation of personal care and food products, paints and coatings, microfluidic and lab-on-a-chip applications, cell membranes, and lung surfactants. Accordingly, research and expertise on the subject are spread over a broad range of academic disciplines and industrial laboratories. This book brings together knowledge from these different places with the aim of fostering education, collaborations and research progress.

  12. The Ni-YSZ interface

    DEFF Research Database (Denmark)

    Jensen, Karin Vels

    content (99.8% Ni and 99.995% Ni) were used to examine the impact of impurities on the polarisation resistance and contact area morphology. The electropolished nickel wires were pressed against a polished 8 mol% YSZ surface. Extensive structural changes from a flat interface to a hill and valley structure...... between polarised and non-polarised samples. With pure nickel wires, however, the microstructures depended on the polarisation/non-polarisation conditions. At non-polarised conditions a hill and valley type structure was found. Anodic polarisation produced an up to 1 μm thick interface layer consisting...... of nano-sized YSZ particles with some Ni present. At cathodic polarisation both a granulated structure and a hill and valley structure resembling the structure of non-polarised samples were found. Small impurity ridges were surrounding the contact areas on non-polarised and cathodically polarised samples...

  13. Towards personalized adaptive user interfaces

    International Nuclear Information System (INIS)

    Kostov, Vlaho; Fukuda, Shuchi; Yanagisawa, Hideyoshi

    2002-01-01

    An approach towards standardization of the general rules for synthesis and design of man machine interfaces that include dynamic adaptive behavior is presented. The link between the personality type (Myers-Briggs or Kersey Temperament sorter) and the personal preferences of the users (Kansei) for the purpose of building Graphical User Interface (GU]) was investigated. The rules for a personalized el-notional GUI based on the subjective preferences of the users were defined. The results were tested on a modified TETRIS game that displayed background characters capable of emotional response. When the system responded to a user in a manner that is customized to his or her preferences, the reaction time was smaller and the information transfer was faster. Usability testing methods were used and it was shown that development of pleasant cartoon face GUI based on the users inborn personality tendencies was feasible. (Author)

  14. Low latency asynchronous interface circuits

    Science.gov (United States)

    Sadowski, Greg

    2017-06-20

    In one form, a logic circuit includes an asynchronous logic circuit, a synchronous logic circuit, and an interface circuit coupled between the asynchronous logic circuit and the synchronous logic circuit. The asynchronous logic circuit has a plurality of asynchronous outputs for providing a corresponding plurality of asynchronous signals. The synchronous logic circuit has a plurality of synchronous inputs corresponding to the plurality of asynchronous outputs, a stretch input for receiving a stretch signal, and a clock output for providing a clock signal. The synchronous logic circuit provides the clock signal as a periodic signal but prolongs a predetermined state of the clock signal while the stretch signal is active. The asynchronous interface detects whether metastability could occur when latching any of the plurality of the asynchronous outputs of the asynchronous logic circuit using said clock signal, and activates the stretch signal while the metastability could occur.

  15. Tightness of voter model interfaces

    Czech Academy of Sciences Publication Activity Database

    Sturm, A.; Swart, Jan M.

    2008-01-01

    Roč. 13, - (2008), s. 165-174 ISSN 1083-589X R&D Projects: GA ČR GA201/06/1323; GA ČR GA201/07/0237 Institutional research plan: CEZ:AV0Z10750506 Keywords : long range voter model * swapping voter model * interface tightness * exclusion process Subject RIV: BD - Theory of Information Impact factor: 0.392, year: 2008 http://www.emis.de/journals/EJP-ECP/_ejpecp/index.html

  16. The Interface Theory of Perception.

    Science.gov (United States)

    Hoffman, Donald D; Singh, Manish; Prakash, Chetan

    2015-12-01

    Perception is a product of evolution. Our perceptual systems, like our limbs and livers, have been shaped by natural selection. The effects of selection on perception can be studied using evolutionary games and genetic algorithms. To this end, we define and classify perceptual strategies and allow them to compete in evolutionary games in a variety of worlds with a variety of fitness functions. We find that veridical perceptions--strategies tuned to the true structure of the world--are routinely dominated by nonveridical strategies tuned to fitness. Veridical perceptions escape extinction only if fitness varies monotonically with truth. Thus, a perceptual strategy favored by selection is best thought of not as a window on truth but as akin to a windows interface of a PC. Just as the color and shape of an icon for a text file do not entail that the text file itself has a color or shape, so also our perceptions of space-time and objects do not entail (by the Invention of Space-Time Theorem) that objective reality has the structure of space-time and objects. An interface serves to guide useful actions, not to resemble truth. Indeed, an interface hides the truth; for someone editing a paper or photo, seeing transistors and firmware is an irrelevant hindrance. For the perceptions of H. sapiens, space-time is the desktop and physical objects are the icons. Our perceptions of space-time and objects have been shaped by natural selection to hide the truth and guide adaptive behaviors. Perception is an adaptive interface.

  17. Field interface module software description

    Science.gov (United States)

    Valtier, H.

    1982-01-01

    The software for the field interface module (FIM) is designed to fully optimize the hardware capabilities of the FIM. Software routines exist which enable the FIM to monitor data, control components, communicate with an uplink computer, and perform real-time and local self-diagnostics. The FIM program is not dependent upon any particular uplink computer and is adaptable to various applications with a miniumum of modifications.

  18. Surface Waves on Metamaterials Interfaces

    DEFF Research Database (Denmark)

    Takayama, Osamu; Shkondin, Evgeniy; Panah, Mohammad Esmail Aryaee

    2016-01-01

    We analyze surface electromagnetic waves supported at the interface between isotropic medium and effective anisotropic material that can be realized by alternating conductive and dielectrics layers. This configuration can host various types of surface waves and therefore can serve as a rich...... platform for applications of surface photonics. Most of these surface waves are directional and as such their propagation can be effectively controlled by changing wavelength or material parameters tuning....

  19. Formal specification of human-computer interfaces

    Science.gov (United States)

    Auernheimer, Brent

    1990-01-01

    A high-level formal specification of a human computer interface is described. Previous work is reviewed and the ASLAN specification language is described. Top-level specifications written in ASLAN for a library and a multiwindow interface are discussed.

  20. User acquaintance with mobile interfaces.

    Science.gov (United States)

    Ehrler, Frederic; Walesa, Magali; Sarrey, Evelyne; Wipfli, Rolf; Lovis, Christian

    2013-01-01

    Handheld technology finds slowly its place in the healthcare world. Some clinicians already use intensively dedicated mobile applications to consult clinical references. However, handheld technology hasn't still broadly embraced to the core of the healthcare business, the hospitals. The weak penetration of handheld technology in the hospitals can be partly explained by the caution of stakeholders that must be convinced about the efficiency of these tools before going forward. In a domain where temporal constraints are increasingly strong, caregivers cannot loose time on playing with gadgets. All users are not comfortable with tactile manipulations and the lack of dedicated peripheral complicates entering data for novices. Stakeholders must be convinced that caregivers will be able to master handheld devices. In this paper, we make the assumption that the proper design of an interface may influence users' performances to record information. We are also interested to find out whether users increase their efficiency when using handheld tools repeatedly. To answer these questions, we have set up a field study to compare users' performances on three different user interfaces while recording vital signs. Some user interfaces were familiar to users, and others were totally innovative. Results showed that users' familiarity with smartphone influences their performances and that users improve their performances by repeating a task.

  1. MEDIA : MEDoc Interface for AIA

    Science.gov (United States)

    Alingery, P.; Soubrié, E.; Auchère, F.; Bocchialini, K.; Boignard, J. P.; Buchlin, E.; Malappert, J. C.; Parenti, S.

    2013-03-01

    MEDOC, the space solar data center at Orsay (http://www.ias.u-psud.fr/medoc) is now providing a new web access to the AIA/SDO level 1 images. This interface has the advantage of being simple, intuitive, very stable and fast. The full resolution 4k x 4k AIA level 1 images archived at MEDOC are downloaded from upstream DRMS nodes with a 1 minute cadence at all wavelengths. The dataset will be kept online on a redundant archive for the whole SDO mission duration. The FITS files are accessible via an user friendly web interface (http://medoc-sdo.ias.u-psud.fr) that allows users to request data by selecting a date range, the desired wavelengths and a sampling rate (choosing a cadence from 1 minute to 1 day). For each file, users can preview the image (using the Helioviewer tool) or display the header information before downloading the FITS files (with or without Rice-compression). This web interface was built using Sitools2, a tool developed by CNES, the French space agency, and supports most browsers. For more advanced users, a Search/Get Python module is also available at http://sdo.ias.u-psud.fr/python. The users can use it to build more complex yet more powerful queries. We encourage everyone in Europe and beyond to use these new services!

  2. Fluid mechanics of environmental interfaces

    CERN Document Server

    Gualtieri, Carlo

    2012-01-01

    Preface Preface of the first editionBiographies of the authors Part one - Preliminaries1. Environmental fluid mechanics: Current issues and future outlook B. Cushman-Roisin, C. Gualtieri & D.T. MihailovicPart two - Processes at atmospheric interfaces2. Point source atmospheric diffusionB. Rajkovic, I. Arsenic & Z. Grsic3. Air-sea interaction V. Djurdjevic & B. Rajkovic4. Modelling of flux exchanges between heterogeneous surfaces and atmosphere D.T. Mihailovic & D. Kapor5. Desert dust uptake-transport and deposition mechanisms - impacts of dust on radiation, clouds and precipitation G. Kallos, P. Katsafados & C. SpyrouPart three - Processes at water interfaces6. Gas-transfer at unsheared free-surfaces C. Gualtieri & G. Pulci Doria7. Advective diffusion of air bubbles in turbulent water flows H. Chanson8. Exchanges at the bed sediments-water column interface F.A. Bombardelli & P.A. Moreno9. Surface water and streambed sediment interaction: The hyporheic exchange D. Tonina10. Environm...

  3. Interface high-temperature superconductivity

    Science.gov (United States)

    Wang, Lili; Ma, Xucun; Xue, Qi-Kun

    2016-12-01

    Cuprate high-temperature superconductors consist of two quasi-two-dimensional (2D) substructures: CuO2 superconducting layers and charge reservoir layers. The superconductivity is realized by charge transfer from the charge reservoir layers into the superconducting layers without chemical dopants and defects being introduced into the latter, similar to modulation-doping in the semiconductor superlattices of AlGaAs/GaAs. Inspired by this scheme, we have been searching for high-temperature superconductivity in ultra-thin films of superconductors epitaxially grown on semiconductor/oxide substrates since 2008. We have observed interface-enhanced superconductivity in both conventional and unconventional superconducting films, including single atomic layer films of Pb and In on Si substrates and single unit cell (UC) films of FeSe on SrTiO3 (STO) substrates. The discovery of high-temperature superconductivity with a superconducting gap of ∼20 meV in 1UC-FeSe/STO has stimulated tremendous interest in the superconductivity community, for it opens a new avenue for both raising superconducting transition temperature and understanding the pairing mechanism of unconventional high-temperature superconductivity. Here, we review mainly the experimental progress on interface-enhanced superconductivity in the three systems mentioned above with emphasis on 1UC-FeSe/STO, studied by scanning tunneling microscopy/spectroscopy, angle-resolved photoemission spectroscopy and transport experiments. We discuss the roles of interfaces and a possible pairing mechanism inferred from these studies.

  4. Bubble bursting at an interface

    Science.gov (United States)

    Kulkarni, Varun; Sajjad, Kumayl; Anand, Sushant; Fezzaa, Kamel

    2017-11-01

    Bubble bursting is crucial to understanding the life span of bubbles at an interface and more importantly the nature of interaction between the bulk liquid and the outside environment from the point of view of chemical and biological material transport. The dynamics of the bubble as it rises from inside the liquid bulk to its disappearance on the interface after bursting is an intriguing process, many aspects of which are still being explored. In our study, we make detailed high speed imaging measurements to examine carefully the hole initiation and growth in bursting bubbles that unearth some interesting features of the process. Previous analyses available in literature are revisited based on our novel experimental visualizations. Using a combination of experiments and theory we investigate the role of various forces during the rupturing process. This work aims to further our current knowledge of bubble dynamics at an interface with an aim of predicting better the bubble evolution from its growth to its eventual integration with the liquid bulk.

  5. Molecular dynamics study of salt–solution interface: Solubility and surface charge of salt in water

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Kazuya; Liang, Yunfeng, E-mail: y-liang@earth.kumst.kyoto-u.ac.jp, E-mail: matsuoka@earth.kumst.kyoto-u.ac.jp; Matsuoka, Toshifumi, E-mail: y-liang@earth.kumst.kyoto-u.ac.jp, E-mail: matsuoka@earth.kumst.kyoto-u.ac.jp [Environment and Resource System Engineering, Kyoto University, Kyoto 615-8540 (Japan); Sakka, Tetsuo [Department of Energy and Hydrocarbon Chemistry, Kyoto University, Kyoto 615-8510 (Japan)

    2014-04-14

    The NaCl salt–solution interface often serves as an example of an uncharged surface. However, recent laser-Doppler electrophoresis has shown some evidence that the NaCl crystal is positively charged in its saturated solution. Using molecular dynamics (MD) simulations, we have investigated the NaCl salt–solution interface system, and calculated the solubility of the salt using the direct method and free energy calculations, which are kinetic and thermodynamic approaches, respectively. The direct method calculation uses a salt–solution combined system. When the system is equilibrated, the concentration in the solution area is the solubility. In the free energy calculation, we separately calculate the chemical potential of NaCl in two systems, the solid and the solution, using thermodynamic integration with MD simulations. When the chemical potential of NaCl in the solution phase is equal to the chemical potential of the solid phase, the concentration of the solution system is the solubility. The advantage of using two different methods is that the computational methods can be mutually verified. We found that a relatively good estimate of the solubility of the system can be obtained through comparison of the two methods. Furthermore, we found using microsecond time-scale MD simulations that the positively charged NaCl surface was induced by a combination of a sodium-rich surface and the orientation of the interfacial water molecules.

  6. Health education - knowledge overlapping or interface?

    Directory of Open Access Journals (Sweden)

    Marilene Calderaro da Silva Munguba

    2010-12-01

    Full Text Available Profissionais que exercem suas funções no âmbito da saúde, em especial na promoção da saúde, estão intimamente vinculados à educação no seu cotidiano. Não significa, entretanto, que todos compreendem o processo de ensino-aprendizagem e como desenvolvê-lo nas situações que envolvem a interface educação e saúde.Neste contexto, encontra-se a Educação em Saúde que objetiva a aprendizagem e aplicação de conceitos inerentes à saúde no sentido de promover o empowerment comunitário(1. Exercer a função de ensinar, no contexto da saúde, tem sido um desafio, em especial à tendência de reproduzir estratégias de ensino vivenciadas pelo profissional ao exercer o papel de aluno em que o professor se mantinha no centro. Acolher ideias da pessoa a ser ensinada, conhecer a história de vida e as funções que exerce nos diversos contextos em que está inserida, compreender a cultura, tradições e visão de mundo faz a diferença.Pensadores da área histórico-cultural têm contribuído para a percepção de que a mediação realizada com base no conhecimento da própria realidade e a busca de estratégias para modificá-la, tem se mostrado efetiva(2,3.Compreender, portanto, como essas pessoas aprendem é determinante para reunir condições adequadas para ensiná-las. Trata-se do principal desafio no contexto da educação formal ou informal. Em se tratando do contexto educativo informal, os profissionais da saúde necessitam reconhecer que o conhecimento determinante para certo grupo social encontra-se na cultura desse grupo(4. Esta compreensão é essencial para a valorização da escuta e do saber cultural. Identifica-se que a formação em educação popular com a perspectiva do respeito a esses aspectos tem sido determinante na educação em saúde com o foco na responsabilidade e cidadania(5,6. Assim, a dinâmica da ação de aprender e ensinar, nos diversos contextos de atuação do profissional da saúde, ser

  7. Refactoring Fat Interfaces Using a Genetic Algorithm

    NARCIS (Netherlands)

    Romano, D.; Raemaekers, S.; Pinzger, M.

    2014-01-01

    Recent studies have shown that the violation of the Interface Segregation Principle (ISP) is critical for maintaining and evolving software systems. Fat interfaces (i.e., interfaces violating the ISP) change more frequently and degrade the quality of the components coupled to them. According to the

  8. Novel transport phenomena at complex oxide interfaces

    NARCIS (Netherlands)

    Hilgenkamp, H.

    2013-01-01

    Novel electronic and magnetic phases are being observed at interfaces between insulating, non-magnetic oxide compounds, with the most notable example being the interface between SrTiO3 and LaAlO3. The basic properties of these interfaces will be discussed, as well as prospects for applications and

  9. An Automation Interface for Kappa PC

    DEFF Research Database (Denmark)

    Hartvig, Susanne C

    1999-01-01

    The reports documents an automation interface for Kappa PC. The automation interface can be used to embed Kappa applications in 32-bit Windowsapplications.The interface includes functions for initialising Kappa, for loading an application, for settingvalues, for getting values, and for stopping...

  10. Topology Optimization using an Explicit Interface Representation

    DEFF Research Database (Denmark)

    Christiansen, Asger Nyman; Nobel-Jørgensen, Morten; Bærentzen, J. Andreas

    Current methods for topology optimization primarily represent the interface between solid and void implicitly on fixed grids. In contrast, shape optimization methods represent the interface explicitly, but do not allow for any topological changes to the structure. Using an explicit interface repr...

  11. Dynamics of microalgal communities in the water-column/sediment interface of the inner shelf off Parana State, Southern Brazil

    Directory of Open Access Journals (Sweden)

    Ricardo Luiz Queiroz

    2004-12-01

    Full Text Available The composition and biomass of the microalgal community at the water-column/sediment interface on the continental shelf off Parana State (Brazil were studied every 2 months during 1999. Samples for cell identification and determination of chlorophyll a were taken from the interface layer and at discrete depths up to 4 m above the sediment. Results showed a community mainly formed by benthic and planktonic diatoms >30 µm, benthic diatoms 30 µm, which accounted for most of the pigment biomass, were resuspended from the interface after turbulent periods, and may take advantage of calm periods to stay and grow at the interface. Small benthic diatoms were more susceptible to wind-induced turbulence occurring in higher densities in the water column just above the water-sediment interface. A cyanobacterial bloom (Trichodesmiun was observed at these bottom layers in the spring-summer periods.A composição geral e a biomassa da comunidade microalgal da interface sedimento/água da plataforma do Estado do Paraná (Brasil foram estudadas em 1999 em relação ao regime de ventos. A cada dois meses foram coletadas amostras para a identificação de organismos e determinação de clorofila a, na interface água-sedimento e em profundidades discretas, ao longo da coluna d'água, até 4m acima do sedimento. Os resultados obtidos revelaram uma comunidade constituída principalmente por diatomáceas planctônicas e bentônicas maiores que 30 µm, diatomáceas bentônicas menores que 30 µm, e cianobactérias coloniais. As densidades celulares foram geralmente mais altas na interface. Eventos de mistura e sedimentação parecem ser determinantes na regulação da composição e biomassa de tais comunidades. Formas menores, mais susceptíveis à turbulência, dominaram a comunidade de água de fundo na maioria das ocasiões, e foram as mais abundantes na interface apenas em períodos de extrema estabilidade. Células maiores, aparentemente contendo a maior parte

  12. Origin of intergranular embrittlement of Al alloys induced by Na and Ca segregation: Grain boundary weakening

    International Nuclear Information System (INIS)

    Lu Guanghong; Zhang Ying; Deng Shenghua; Wang Tianmin; Kohyama, Masanori; Yamamoto, Ryoichi; Liu Feng; Horikawa, Keitaro; Kanno, Motohiro

    2006-01-01

    Using a first-principles computational tensile test, we show that the ideal tensile strength of an Al grain boundary (GB) is reduced with both Na and Ca GB segregation. We demonstrate that the fracture occurs in the GB interface, dominated by the break of the interfacial bonds. Experimentally, we further show that the presence of Na or Ca impurity, which causes intergranular fracture, reduces the ultimate tensile strength when embrittlement occurs. These results suggest that the Na/Ca-induced intergranular embrittlement of an Al alloy originates mainly from the GB weakening due to the Na/Ca segregation

  13. Uma abordagem baseada em XML para construção de Interfaces de Usuário para Múltiplos Dispositivos - DOI: 10.4025/actascitechnol.v28i2.1192

    Directory of Open Access Journals (Sweden)

    Ayslan Trevisan Possebom

    2006-03-01

    Full Text Available O desenvolvimento de aplicações para múltiplos dispositivos leva em consideração diferentes características e restrições de cada dispositivo. Linguagens de especificação de interfaces e modelos arquiteturais têm sido utilizados por projetistas de interfaces de usuário. Nesse contexto, este artigo apresenta a linguagem de especificação de interfaces de usuário UIML (UIML2 - User Interface Markup Language 2.0 e o modelo arquitetural MIM (Meta-Interface Model, que possuem papel importante na construção de interfaces de usuários para múltiplos dispositivos. Adicionalmente, discute-se o desenvolvimento de uma ferramenta de geração de software da interface de usuário a partir da especificação na linguagem UIML

  14. At NA2

    CERN Multimedia

    1977-01-01

    One of the NA2 calorimeter sections is moved in. The NA2 calorimeter was divided in two halves, to the left and the right of the beam, each half consisting of sheets of passive high Z material interleaved with blades of plastic scintillators. The photo shows on the right, the upstream 'electron' module with eleven lead plates for a total radiation length of 20.

  15. Surface and interface effects in VLSI

    CERN Document Server

    Einspruch, Norman G

    1985-01-01

    VLSI Electronics Microstructure Science, Volume 10: Surface and Interface Effects in VLSI provides the advances made in the science of semiconductor surface and interface as they relate to electronics. This volume aims to provide a better understanding and control of surface and interface related properties. The book begins with an introductory chapter on the intimate link between interfaces and devices. The book is then divided into two parts. The first part covers the chemical and geometric structures of prototypical VLSI interfaces. Subjects detailed include, the technologically most import

  16. Synthesis and Luminescence Properties of Water Soluble α-NaGdF4/β-NaYF4:Yb,Er Core-Shell Nanoparticles

    Science.gov (United States)

    Chen, Huan; Zhang, Peipei; Cui, Haining; Qin, Weiping; Zhao, Dan

    2017-09-01

    Hexagonal phase (β) sodium rare earth tetrafluorides (NaREF4, RE = Y, Gd, Lu, et al.) are considered the ideal matrices for lanthanide (Ln) ions doped upconversion (UC) luminescence materials, because they can provide favorable crystal lattice structures for the doped luminescent Ln ions to make intensive emissions. However, the cubic phase (α) NaREF4 always preferentially forms at low reaction temperature in short time as it is dynamically stable. Therefore, it is hard to obtain small sized β-NaREF4 via the traditional solvothermal method. In this paper, small sized β-NaYF4:Yb,Er nanoparticles were synthesized by a heterogeneous-core-induced method via the solvothermal reaction. The heterogeneous α-NaGdF4/β-NaYF4: Yb, Er core-shell structure was confirmed by the local elemental mapping. The formation mechanism of β-NaYF4:Yb,Er shell on the surface of α-NaGdF4 core was explained in detail. We reasoned that a hetero interface with a lower lattice symmetric structure was produced by cation exchanges between the core and shell, which caused the preferential growth of anisotropic hexagonal phase shell. The existence of this hetero interface has also been proven by observation of Gd3+ UC emission.

  17. RISC mezzanines for controlling data acquisition in the NA48 experiment at CERN

    International Nuclear Information System (INIS)

    Guzik, Z.; Chlopik, A.; Bal, Fr.; Formenti, F.; Lacourt, A.

    2000-01-01

    A part of the LKr calorimeter data acquisition system of the NA48 experiment (a precision measurements of ε/ε' in CP violating; K 0 →2π decays) is described. The experiment runs on the SPS north area in CERN. This paper presents some aspects of controlling the NA48 readout process based on commercial RIO 8260 RISC processors, which were used as a core for maintaining control algorithms. Several RISC processors were equipped with custom-made VME mezzanine boards providing interfacing, pre-processing and data formatting. These mezzanines are subjects of this paper. They are: RIO-TIC/DAT - time stamp distributor and buffered DT-bus interface, FOL-RIO - optical data formatter and event merger and 'TAXI receiver' - handling trigger data of the NA48 Level 2 trigger supervisor. Also the interface between DT-bus and S-link/PCI is described

  18. RISC mezzanines for controlling data acquisition in the NA48 experiment at CERN

    CERN Document Server

    Guzik, Z; Bal, F; Formenti, F; Lacourt, A

    2000-01-01

    A part of the LKr calorimeter data acquisition system of the NA48 experiment (a precision measurements of epsilon / epsilon ' in CP- violating K/sup 0/ to 2 pi decays) is described. The experiment runs on the SPS north area in CERN. This paper presents some aspects of controlling the NA48 readout process based on commercial RIO 8260 RISC processors, which were used as a core for maintaining control algorithms. Several RISC processors were equipped with custom-made VME mezzanine boards providing interfacing, pre-processing and data formatting. These mezzanines are the subjects of this paper. They are: RIO-TIC/DAT (a time-stamp distributor and buffered DT-bus interface), FOL-RIO (an optical data formatter and event merger) and "TAXI receiver" (for handling trigger data of the NA48 Level-2 trigger supervisor). Also, the interface between the DT-bus and S- link/PCI is described. (8 refs).

  19. Surface rheology and interface stability.

    Energy Technology Data Exchange (ETDEWEB)

    Yaklin, Melissa A.; Cote, Raymond O.; Moffat, Harry K.; Grillet, Anne Mary; Walker, Lynn; Koehler, Timothy P.; Reichert, Matthew D. (Carnegie Mellon University, Pittsburgh, PA); Castaneda, Jaime N.; Mondy, Lisa Ann; Brooks, Carlton, F.

    2010-11-01

    We have developed a mature laboratory at Sandia to measure interfacial rheology, using a combination of home-built, commercially available, and customized commercial tools. An Interfacial Shear Rheometer (KSV ISR-400) was modified and the software improved to increase sensitivity and reliability. Another shear rheometer, a TA Instruments AR-G2, was equipped with a du Nouey ring, bicone geometry, and a double wall ring. These interfacial attachments were compared to each other and to the ISR. The best results with the AR-G2 were obtained with the du Nouey ring. A Micro-Interfacial Rheometer (MIR) was developed in house to obtain the much higher sensitivity given by a smaller probe. However, it was found to be difficult to apply this technique for highly elastic surfaces. Interfaces also exhibit dilatational rheology when the interface changes area, such as occurs when bubbles grow or shrink. To measure this rheological response we developed a Surface Dilatational Rheometer (SDR), in which changes in surface tension with surface area are measured during the oscillation of the volume of a pendant drop or bubble. All instruments were tested with various surfactant solutions to determine the limitations of each. In addition, foaming capability and foam stability were tested and compared with the rheology data. It was found that there was no clear correlation of surface rheology with foaming/defoaming with different types of surfactants, but, within a family of surfactants, rheology could predict the foam stability. Diffusion of surfactants to the interface and the behavior of polyelectrolytes were two subjects studied with the new equipment. Finally, surface rheological terms were added to a finite element Navier-Stokes solver and preliminary testing of the code completed. Recommendations for improved implementation were given. When completed we plan to use the computations to better interpret the experimental data and account for the effects of the underlying bulk

  20. The conversational interface talking to smart devices

    CERN Document Server

    McTear, Michael; Griol, David

    2016-01-01

    This book provides a comprehensive introduction to the conversational interface, which is becoming the main mode of interaction with virtual personal assistants, smart devices, various types of wearables, and social robots. The book consists of four parts: Part I presents the background to conversational interfaces, examining past and present work on spoken language interaction with computers; Part II covers the various technologies that are required to build a conversational interface along with practical chapters and exercises using open source tools; Part III looks at interactions with smart devices, wearables, and robots, and then goes on to discusses the role of emotion and personality in the conversational interface; Part IV examines methods for evaluating conversational interfaces and discusses future directions. · Presents a comprehensive overview of the various technologies that underlie conversational user interfaces; · Combines descriptions of conversational user interface technologies with a gui...

  1. Polarization dependence of Na* + Na* associative ionization revisited

    NARCIS (Netherlands)

    Meijer, H.A.J.; Meulen, H.P. v.d.; Morgenstern, R.; Hertel, I.V.; Meyer, E.; Witte, R.

    1986-01-01

    The dependence of the associative ionization process Na 3 2P3/2 + Na 3 2P3/2 → Na2+ + e- on the polarization of the laser light used for Na excitation was independently investigated in Utrecht and Berlin. The purpose of this paper is to clarify discrepancies between two other earlier experimental

  2. Interface losses in multimaterial resonators

    DEFF Research Database (Denmark)

    Villanueva, L.G.; Amato, B.; Larsen, Tom

    2014-01-01

    vibrational modes to achieve a total of more than 3000 experimental points that allow us to quantify the contribution of surface and volume intrinsic (material related) losses in MEMS resonators. We conclude that the losses in the interface between silicon nitride and aluminum is a very important contributor......We present an extensive study shedding light on the role of surface and bulk losses in micromechanical resonators. We fabricate thin silicon nitride membranes of different sizes and we coat them with different thicknesses of metal. We later characterize the 81 lowest out-of-plane flexural...

  3. Some Economics of User Interfaces

    OpenAIRE

    Hal R. Varian

    1994-01-01

    I examine the incentives for software providers to design appropriate user interfaces. There are two sorts of costs involved when one uses software: the fixed cost of learning to use a piece of software and the the variable cost of operating the software. For example menu driven software is easy to learn, but tedious to operate. I show that a monopoly provider of software generally invests the ``right'' amount of resources in making the software easy to learn, but too little in making it easy...

  4. Interface between Context and Theory

    DEFF Research Database (Denmark)

    Chen, Cong; Wang, Daojuan; Zhang, Bin

    2017-01-01

    In this paper, we explores how to consider contextual factors in the development of paradigm theory by focusing on the application and development of agency theory in a cross context. Specifically, the interface between agency theory and context is established from two aspects. On one hand......, the application and development of agency theory in both developed and emerging economies are examined from the perspectives of principal-agent conflicts (PAC) and principal-principal conflicts (PPC), respectively. On the other hand, a model of contextualization theory is created from the perspectives of PAC...

  5. Avalanche dynamics of elastic interfaces.

    Science.gov (United States)

    Le Doussal, Pierre; Wiese, Kay Jörg

    2013-08-01

    Slowly driven elastic interfaces, such as domain walls in dirty magnets, contact lines wetting a nonhomogeneous substrate, or cracks in brittle disordered material proceed via intermittent motion, called avalanches. Here we develop a field-theoretic treatment to calculate, from first principles, the space-time statistics of instantaneous velocities within an avalanche. For elastic interfaces at (or above) their (internal) upper critical dimension d≥d(uc) (d(uc)=2,4 respectively for long-ranged and short-ranged elasticity) we show that the field theory for the center of mass reduces to the motion of a point particle in a random-force landscape, which is itself a random walk [Alessandro, Beatrice, Bertotti, and Montorsi (ABBM) model]. Furthermore, the full spatial dependence of the velocity correlations is described by the Brownian-force model (BFM) where each point of the interface sees an independent Brownian-force landscape. Both ABBM and BFM can be solved exactly in any dimension d (for monotonous driving) by summing tree graphs, equivalent to solving a (nonlinear) instanton equation. We focus on the limit of slow uniform driving. This tree approximation is the mean-field theory (MFT) for realistic interfaces in short-ranged disorder, up to the renormalization of two parameters at d=d(uc). We calculate a number of observables of direct experimental interest: Both for the center of mass, and for a given Fourier mode q, we obtain various correlations and probability distribution functions (PDF's) of the velocity inside an avalanche, as well as the avalanche shape and its fluctuations (second shape). Within MFT we find that velocity correlations at nonzero q are asymmetric under time reversal. Next we calculate, beyond MFT, i.e., including loop corrections, the one-time PDF of the center-of-mass velocity u[over ·] for dimension delasticity) and a=1-4/9(2-d)+... (long-ranged elasticity). We show how the dynamical theory recovers the avalanche-size distribution

  6. Metawidgets in the multimodal interface

    Energy Technology Data Exchange (ETDEWEB)

    Blattner, M.M. (Lawrence Livermore National Lab., CA (United States) Anderson (M.D.) Cancer Center, Houston, TX (United States)); Glinert, E.P.; Jorge, J.A.; Ormsby, G.R. (Rensselaer Polytechnic Inst., Troy, NY (United States). Dept. of Computer Science)

    1991-01-01

    We analyze two intertwined and fundamental issues concerning computer-to-human communication in the multimodal interfaces: the interplay between sound and graphics, and the role of object persistence. Our observations lead us to introduce metawidgets as abstract entities capable of manifesting themselves to users as image, as sound, or as various combinations and/or sequences of the two media. We show examples of metawidgets in action, and discuss mechanisms for choosing among alternative media for metawidget instantiation. Finally, we describe a couple of experimental microworlds we have implemented to test out some of our ideas. 17 refs., 7 figs.

  7. Praxis input/output interface

    International Nuclear Information System (INIS)

    Shapiro, R.E.; Evans, A. Jr.

    1981-01-01

    This document is intended as an introduction to the use of RMS facilities via Praxis (this interface hereafter called Praxis-RMS). It is presumed that the reader is familiar with Praxis conventions as well as with RMS use (at the MACRO level). Since Praxis-RMS was designed to be functionally equivalent to MACRO-RMS, the explanations follow the pattern of the DEC MACRO-RMS documentation (particularly the programmer's reference manual). A complete list of the procedures that make up Praxis-RMS appears at the end of this document (with parameters), along with the constants (grouped by type) that can be used as actual parameters

  8. Interface-læring

    DEFF Research Database (Denmark)

    Thorhauge, Sally

    2015-01-01

    Interface-læring er den læringsoplevelse, der kan opstå i grænsefladen mellem to væsensforskellige læringsmiljøer, når de mødes og griber ind i hinanden. Et gymnasium og et museum er eksempler på to sådanne læringsmiljøer. Artiklen præsenterer nogle af de væsentligste resultater fra min ph.d. afh...

  9. The relationship between perceived usability of a beautiful interface and of an ugly interface

    OpenAIRE

    Mohammed, Naitullah; Syed.Mohammed, Mahamood Ur Rahman

    2012-01-01

    The relationship between the perceived usability of a beautiful interface and of an ugly interface is analyzed in this study. This study correlates the visual aesthetics of the website with perceived usability. This research is performed to know the significance of visual aesthetics on perceived usability. A website is designed with two interfaces. One interface is designed by following design guidelines with respect to usability and the other interface is designed without following guideline...

  10. Unraveling the electrolyte properties of Na3SbS4 through computation and experiment

    Science.gov (United States)

    Rush, Larry E.; Hood, Zachary D.; Holzwarth, N. A. W.

    2017-12-01

    Solid-state sodium electrolytes are expected to improve next-generation batteries on the basis of favorable energy density and reduced cost. Na3SbS4 represents a new solid-state ion conductor with high ionic conductivities in the mS/cm range. Here, we explore the tetragonal phase of Na3SbS4 and its interface with metallic sodium anode using a combination of experiments and first-principles calculations. The computed Na-ion vacancy migration energies of 0.1 eV are smaller than the value inferred from experiment, suggesting that grain boundaries or other factors dominate the experimental systems. Analysis of symmetric cells of the electrolyte—Na/Na 3SbS4/Na —show that a conductive solid electrolyte interphase forms. Computer simulations infer that the interface is likely to be related to Na3SbS3 , involving the conversion of the tetrahedral SbS43 - ions of the bulk electrolyte into trigonal pyramidal SbS33 - ions at the interface.

  11. Nondestructive depth-resolved spectroscopic investigation of the heavily intermixed In2S3/Cu(In,Ga)Se2 interface

    Energy Technology Data Exchange (ETDEWEB)

    Bar, Marcus; Barreau, N.; Couzinie-Devy, F.; Pookpanratana, S.; Klaer, J.; Blum, M.; Zhang, Y.; Yang, W.; Denlinger, J.D.; Schock, H.W.; Weinhardt, L.; Kessler, J.; Heske, Clemens

    2010-04-06

    The chemical structure of the interface between a nominal In2S3 buffer and a Cu(In,Ga)Se2 (CIGSe) thin-film solar cell absorber was investigated by soft x-ray photoelectron and emission spectroscopy. We find a heavily intermixed, complex interface structure, in which Cu diffuses into (and Na through) the buffer layer, while the CIGSe absorber surface/interface region is partially sulfurized. Based on our spectroscopic analysis, a comprehensive picture of the chemical interface structure is proposed.

  12. Slow rupture of frictional interfaces

    Science.gov (United States)

    Bar Sinai, Yohai; Brener, Efim A.; Bouchbinder, Eran

    2012-02-01

    The failure of frictional interfaces and the spatiotemporal structures that accompany it are central to a wide range of geophysical, physical and engineering systems. Recent geophysical and laboratory observations indicated that interfacial failure can be mediated by slow slip rupture phenomena which are distinct from ordinary, earthquake-like, fast rupture. These discoveries have influenced the way we think about frictional motion, yet the nature and properties of slow rupture are not completely understood. We show that slow rupture is an intrinsic and robust property of simple non-monotonic rate-and-state friction laws. It is associated with a new velocity scale cmin, determined by the friction law, below which steady state rupture cannot propagate. We further show that rupture can occur in a continuum of states, spanning a wide range of velocities from cmin to elastic wave-speeds, and predict different properties for slow rupture and ordinary fast rupture. Our results are qualitatively consistent with recent high-resolution laboratory experiments and may provide a theoretical framework for understanding slow rupture phenomena along frictional interfaces.

  13. Brain Computer Interfaces, a Review

    Directory of Open Access Journals (Sweden)

    Luis Fernando Nicolas-Alonso

    2012-01-01

    Full Text Available A brain-computer interface (BCI is a hardware and software communications system that permits cerebral activity alone to control computers or external devices. The immediate goal of BCI research is to provide communications capabilities to severely disabled people who are totally paralyzed or ‘locked in’ by neurological neuromuscular disorders, such as amyotrophic lateral sclerosis, brain stem stroke, or spinal cord injury. Here, we review the state-of-the-art of BCIs, looking at the different steps that form a standard BCI: signal acquisition, preprocessing or signal enhancement, feature extraction, classification and the control interface. We discuss their advantages, drawbacks, and latest advances, and we survey the numerous technologies reported in the scientific literature to design each step of a BCI. First, the review examines the neuroimaging modalities used in the signal acquisition step, each of which monitors a different functional brain activity such as electrical, magnetic or metabolic activity. Second, the review discusses different electrophysiological control signals that determine user intentions, which can be detected in brain activity. Third, the review includes some techniques used in the signal enhancement step to deal with the artifacts in the control signals and improve the performance. Fourth, the review studies some mathematic algorithms used in the feature extraction and classification steps which translate the information in the control signals into commands that operate a computer or other device. Finally, the review provides an overview of various BCI applications that control a range of devices.

  14. The blanket interface to TSTA

    International Nuclear Information System (INIS)

    Clemmer, R.G.; Finn, P.A.; Grimm, T.L.; Sze, D.K.; Anderson, J.L.; Bartlit, J.R.; Naruse, Y.; Yoshida, H.

    1988-01-01

    The requirements of tritium technology are centered in three main areas, (1) fuel processing, (2) breeder tritium extraction, and (3) tritium containment. The Tritium Systems Test Assembly (TSTA) now in operation at Los Alamos National Laboratory (LANL) is dedicated to developing and demonstrating the tritium technology for fuel processing and containment. TSTA is the only fusion fuel processing facility that can operate in a continuous closed-loop mode. The tritium throughput of TSTA is 1000 g/d. However, TSTA does not have a blanket interface system. The authors have initiated a study to define a Breeder Blanket Interface (BBIO) for TSTA. The first step of the work is to define the condition of the gaseous tritium stream from the blanket tritium recovery system. This report summarizes this part of the work for one particular blanket concept, i.e., a self-cooled lithium blanket. The total gas throughput, the hydrogen to tritium ratio, the corrosive chemicals, and the radionuclides are defined. Various methods of tritium recovery from liquid lithium were assessed: yttrium gettering, permeation windows, and molten salt extraction. The authors' evaluation concluded that the best method was molten salt extraction

  15. Interface-based software testing

    Directory of Open Access Journals (Sweden)

    Aziz Ahmad Rais

    2016-10-01

    Full Text Available Software quality is determined by assessing the characteristics that specify how it should work, which are verified through testing. If it were possible to touch, see, or measure software, it would be easier to analyze and prove its quality. Unfortunately, software is an intangible asset, which makes testing complex. This is especially true when software quality is not a question of particular functions that can be tested through a graphical user interface. The primary objective of software architecture is to design quality of software through modeling and visualization. There are many methods and standards that define how to control and manage quality. However, many IT software development projects still fail due to the difficulties involved in measuring, controlling, and managing software quality. Software quality failure factors are numerous. Examples include beginning to test software too late in the development process, or failing properly to understand, or design, the software architecture and the software component structure. The goal of this article is to provide an interface-based software testing technique that better measures software quality, automates software quality testing, encourages early testing, and increases the software’s overall testability

  16. Graphical User Interface in Art

    Science.gov (United States)

    Gwilt, Ian

    This essay discusses the use of the Graphical User Interface (GUI) as a site of creative practice. By creatively repositioning the GUI as a work of art it is possible to challenge our understanding and expectations of the conventional computer interface wherein the icons and navigational architecture of the GUI no longer function as a technological tool. These artistic recontextualizations are often used to question our engagement with technology and to highlight the pivotal place that the domestic computer has taken in our everyday social, cultural and (increasingly), creative domains. Through these works the media specificity of the screen-based GUI can broken by dramatic changes in scale, form and configuration. This can be seen through the work of new media artists who have re-imagined the GUI in a number of creative forms both, within the digital, as image, animation, net and interactive art, and in the analogue, as print, painting, sculpture, installation and performative event. Furthermore as a creative work, the GUI can also be utilized as a visual way-finder to explore the relationship between the dynamic potentials of the digital and the concretized qualities of the material artifact.

  17. Room temperature cryogenic test interface

    International Nuclear Information System (INIS)

    Faris, S. M.; Davidson, A.; Moskowitz, P. A.; Sai-Halasz, G. A.

    1985-01-01

    This interface permits the testing of high speed semiconductor devices (room-temperature chips) by a Josephson junction sampling device (cryogenic chip) without intolerable loss of resolution. The interface comprises a quartz pass-through plug which includes a planar transmission line interconnecting a first chip station, where the cryogenic chip is mounted, and a second chip station, where the semiconductor chip to be tested is temporarily mounted. The pass-through plug has a cemented long half-cylindrical portion and short half-cylindrical portion. The long portion carries the planar transmission line, the ends of which form the first and second chip mounting stations. The short portion completes the cylinder with the long portion for part of its length, where a seal can be achieved, but does not extend over the chip mounting stations. Sealing is by epoxy cement. The pass-through plug is sealed in place in a flange mounted to the chamber wall. The first chip station, with the cryogenic chip attached, extends into the liquid helium reservoir. The second chip station is in the room temperature environment required for semiconductor operation. Proper semiconductor operating temperature is achieved by a heater wire and control thermocouple in the vicinity of each other and the second chip mounting station. Thermal isolation is maintained by vacuum and seals. Connections for power and control, for test result signals, for temperature control and heating, and for vacuum complete the test apparatus

  18. Interface-based software integration

    Directory of Open Access Journals (Sweden)

    Aziz Ahmad Rais

    2016-07-01

    Full Text Available Enterprise architecture frameworks define the goals of enterprise architecture in order to make business processes and IT operations more effective, and to reduce the risk of future investments. These enterprise architecture frameworks offer different architecture development methods that help in building enterprise architecture. In practice, the larger organizations become, the larger their enterprise architecture and IT become. This leads to an increasingly complex system of enterprise architecture development and maintenance. Application software architecture is one type of architecture that, along with business architecture, data architecture and technology architecture, composes enterprise architecture. From the perspective of integration, enterprise architecture can be considered a system of interaction between multiple examples of application software. Therefore, effective software integration is a very important basis for the future success of the enterprise architecture in question. This article will provide interface-based integration practice in order to help simplify the process of building such a software integration system. The main goal of interface-based software integration is to solve problems that may arise with software integration requirements and developing software integration architecture.

  19. Characterization of biofilm formation by Salmonella enterica at the air-liquid interface in aquatic environments.

    Science.gov (United States)

    Medrano-Félix, José Andrés; Chaidez, Cristóbal; Mena, Kristina D; Soto-Galindo, María Del Socorro; Castro-Del Campo, Nohelia

    2018-03-15

    Survival of bacterial pathogens in different environments is due, in part, to their ability to form biofilms. Four wild-type Salmonella enterica strains, two Oranienburg and two Saintpaul isolated from river water and animal feces, were tested for biofilm formation at the air-liquid interface under stressful conditions (pH and salinity treatments such as pH 3, NaCl 4.5 w/v; pH 7, NaCl 4.5 w/v; pH 10, NaCl 4.5 w/v; pH 3, Nacl 0.5 w/v; pH 7, NaCl 0.5 w/v; and pH 10, NaCl 0.5 w/v); Salmonella Typhimurium DT104 was used as a control strain. Salmonella Oranienburg and Saintpaul from feces were moderately hydrophobic and motile, while S. Saintpaul from water and the control strain S. Typhimurium showed high hydrophobicity, which helped them form more resistant biofilms than S. Oranienburg. Under stressful conditions, all strains experienced difficulties in forming biofilms. Salmonella Saintpaul and Typhimurium expressed the red dry and rough (RDAR) morphotype and were able to form biofilm at air-liquid interface, contrarily to Oranienburg that showed incomplete rough morphology. This study contributes to the knowledge of biofilm formation as a survival strategy for Salmonella in aquatic environments.

  20. Vestuário inteligente e o interface no tratamento da obesidade infantil

    OpenAIRE

    Dias, André José Santos

    2011-01-01

    O tema apresentado “Vestuário inteligente e o interface no tratamento da Obesidade infantil” contém um estudo sobre o aumento da obesidade na faixa etária dos 9 aos 14 anos de idade, aliado ao desenvolvimento de um produto na área de design de moda. Esta pesquisa é de grande importância, porque actualmente este problema de saúde tem apresentado um elevado número de crianças com excesso de peso. Este aumento deve-se a vários motivos dos quais podemos destacar os factores socioculturais, gen...

  1. Interactive displays natural human-interface technologies

    CERN Document Server

    Bhowmik, Achintya K

    2014-01-01

    One of the first books to provide an in-depth discussion of the technologies, applications and trends in the rapidly emerging field of interactive displays (touch, gesture & voice) The book will cover the technologies, applications and trends in the field of interactive displays, namely interfaces based on touch, gesture and voice and those using a combination of these technologies. The book will be split into 4 main parts with each being dedicated to a specific user interface. Part 1 ''Touch Interfaces'' will provide a review of the currently deployed touch-screen technologies and applications. It will also cover the recent developments towards achieving thinner, lightweight and cost-reduced touch screen panels in the future via integration of touch functionalities. Part 2 ''Gesture Interfaces'' will examine techniques and applications in stereoscopic 3D computer vision, structured-light 3D computer vision and time-of-flight 3D computer vision in gesture interfaces. Part 3 ''Voice Interfaces'' will revie...

  2. Kinetics of protein unfolding at interfaces

    International Nuclear Information System (INIS)

    Yano, Yohko F

    2012-01-01

    The conformation of protein molecules is determined by a balance of various forces, including van der Waals attraction, electrostatic interaction, hydrogen bonding, and conformational entropy. When protein molecules encounter an interface, they are often adsorbed on the interface. The conformation of an adsorbed protein molecule strongly depends on the interaction between the protein and the interface. Recent time-resolved investigations have revealed that protein conformation changes during the adsorption process due to the protein-protein interaction increasing with increasing interface coverage. External conditions also affect the protein conformation. This review considers recent dynamic observations of protein adsorption at various interfaces and their implications for the kinetics of protein unfolding at interfaces. (topical review)

  3. Molecular dynamics studies of fluid/oil interfaces for improved oil recovery processes.

    Science.gov (United States)

    de Lara, Lucas S; Michelon, Mateus F; Miranda, Caetano R

    2012-12-20

    In our paper, we study the interface wettability, diffusivity, and molecular orientation between crude oil and different fluids for applications in improved oil recovery (IOR) processes through atomistic molecular dynamics (MD). The salt concentration, temperature, and pressure effects on the physical chemistry properties of different interfaces between IOR agents [brine (H(2)O + % NaCl), CO(2), N(2), and CH(4)] and crude oil have been determined. From the interfacial density profiles, an accumulation of aromatic molecules near the interface has been observed. In the case of brine interfaced with crude oil, our calculations indicate an increase in the interfacial tension with increasing pressure and salt concentration, which favors oil displacement. On the other hand, with the other fluids studied (CO(2), N(2), and CH(4)), the interfacial tension decreases with increasing pressure and temperature. With interfacial tension reduction, an increase in fluid diffusivity in the oil phase is observed. We also studied the molecular orientation properties of the hydrocarbon and fluids molecules in the interface region. We perceived that the molecular orientation could be affected by changes in the interfacial tension and diffusivity of the molecules in the interface region with the increased pressure and temperature: pressure (increasing) → interfacial tension (decreasing) → diffusion (increasing) → molecular ordering. From a molecular point of view, the combination of low interfacial tension and high diffusion of molecules in the oil phase gives the CO(2) molecules unique properties as an IOR fluid compared with other fluids studied here.

  4. Letramento na contemporaneidade

    OpenAIRE

    Kleiman, Angela B.

    2014-01-01

    Neste trabalho examino a relação entre letramento e contemporaneidade, tomando como base para a discussão o letramento no mundo escolar e sua relação com os letramentos de outras instituições do mundo contemporâneo, a fim de determinar as relações entre as finalidades contemporâneas da leitura e da escrita (em outras palavras, o que significa ser letrado na contemporaneidade) e as práticas mobilizadas e as atividades realizadas na escola para atingir essas finalidades. Através de diversos exe...

  5. Nietzsche na moda

    OpenAIRE

    José,João

    2016-01-01

    Resumo Ao resgatar o filósofo alemão do esquecimento, Stefan Zweig seria o principal responsável pela atual "voga Nietzsche". A edição brasileira de seu livro em 1931 e o artigo "L'actualité de Nietzsche", publicado anonimamente na França em 1933, atestariam o crescente interesse pelo autor de Zaratustra . A presença de Nietzsche na cena contemporânea, todavia, dever-se-ia não somente aos ensaios de outros estudiosos como Salomé (1893), Bertram (1918), Andler (1920) e Walz (1932), mas a um fe...

  6. Cooperative strings and glassy interfaces.

    Science.gov (United States)

    Salez, Thomas; Salez, Justin; Dalnoki-Veress, Kari; Raphaël, Elie; Forrest, James A

    2015-07-07

    We introduce a minimal theory of glass formation based on the ideas of molecular crowding and resultant string-like cooperative rearrangement, and address the effects of free interfaces. In the bulk case, we obtain a scaling expression for the number of particles taking part in cooperative strings, and we recover the Adam-Gibbs description of glassy dynamics. Then, by including thermal dilatation, the Vogel-Fulcher-Tammann relation is derived. Moreover, the random and string-like characters of the cooperative rearrangement allow us to predict a temperature-dependent expression for the cooperative length ξ of bulk relaxation. Finally, we explore the influence of sample boundaries when the system size becomes comparable to ξ. The theory is in agreement with measurements of the glass-transition temperature of thin polymer films, and allows quantification of the temperature-dependent thickness hm of the interfacial mobile layer.

  7. A topological quantum optics interface.

    Science.gov (United States)

    Barik, Sabyasachi; Karasahin, Aziz; Flower, Christopher; Cai, Tao; Miyake, Hirokazu; DeGottardi, Wade; Hafezi, Mohammad; Waks, Edo

    2018-02-09

    The application of topology in optics has led to a new paradigm in developing photonic devices with robust properties against disorder. Although considerable progress on topological phenomena has been achieved in the classical domain, the realization of strong light-matter coupling in the quantum domain remains unexplored. We demonstrate a strong interface between single quantum emitters and topological photonic states. Our approach creates robust counterpropagating edge states at the boundary of two distinct topological photonic crystals. We demonstrate the chiral emission of a quantum emitter into these modes and establish their robustness against sharp bends. This approach may enable the development of quantum optics devices with built-in protection, with potential applications in quantum simulation and sensing. Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

  8. Electronic Interfacing with Living Cells

    Science.gov (United States)

    Fleming, James T.

    The direct interfacing of living cells with inorganic electronic materials, components or systems has led to the development of two broad categories of devices that can (1) transduce biochemical signals generated by biological components into electrical signals and (2) transduce electronically generated signals into biochemical signals. The first category of devices permits the monitoring of living cells, the second, enables control of cellular processes. This review will survey this exciting area with emphasis on the fundamental issues and obstacles faced by researchers. Devices and applications that use both prokaryotic (microbial) and eukaryotic (mammalian) cells will be covered. Individual devices described include microbial biofuel cells that produce electricity, bioelectrical reactors that enable electronic control of cellular metabolism, living cell biosensors for the detection of chemicals and devices that permit monitoring and control of mammalian physiology.

  9. Coulombic Fluids Bulk and Interfaces

    CERN Document Server

    Freyland, Werner

    2011-01-01

    Ionic liquids have attracted considerable interest in recent years. In this book the bulk and interfacial physico-chemical characteristics of various fluid systems dominated by Coulomb interactions are treated which includes molten salts, ionic liquids as well as metal-molten salt mixtures and expanded fluid metals. Of particular interest is the comparison of the different systems. Topics in the bulk phase concern the microscopic structure, the phase behaviour and critical phenomena, and the metal-nonmetal transition. Interfacial phenomena include wetting transitions, electrowetting, surface freezing, and the electrified ionic liquid/ electrode interface. With regard to the latter 2D and 3D electrochemical phase formation of metals and semi-conductors on the nanometer scale is described for a number of selected examples. The basic concepts and various experimental methods are introduced making the book suitable for both graduate students and researchers interested in Coulombic fluids.

  10. [Pathology of the vitreomacular interface].

    Science.gov (United States)

    Pop, Monica; Gheorghe, Alina

    2014-01-01

    Vitreous role in the pathophysiology of retinal diseases has increased importantly over the recent years. This was possible using Optical Coherence Tomography which reviewed the way the vitreoretinal interface should be looked at and defined and classified new pathologies such as Vitreoretinal Traction Syndrome. Vitreous is not an empty space but an important anatomical structure with role in ocular physiology. With age biochemical changes occur so that vitreous starts to liquefy. Once the vitreous is liquefied (sinchisis) it collapses and passes in the retrohialoid space (sineresis). In complete PVD besides sinchisis there is a weakness of the adherence between the posterior cortex and ILM with total detachment of posterior cortex. Abnormal adhesions are associated with incomplete PVD. The definition and understanting of vitreoretinal pathology is an active and continuous process, PVD being the trigger of a lot of retinal pathologies: epiretinal membrane, macular hole, tractional macular oedema, VMTS, myopic traction maculopathy, exacerbations of exudative ARMD.

  11. Flexible feature interface for multimedia sources

    Science.gov (United States)

    Coffland, Douglas R [Livermore, CA

    2009-06-09

    A flexible feature interface for multimedia sources system that includes a single interface for the addition of features and functions to multimedia sources and for accessing those features and functions from remote hosts. The interface utilizes the export statement: export "C" D11Export void FunctionName(int argc, char ** argv,char * result, SecureSession *ctrl) or the binary equivalent of the export statement.

  12. Surfaces and interfaces of electronic materials

    CERN Document Server

    Brillson, Leonard J

    2012-01-01

    An advanced level textbook covering geometric, chemical, and electronic structure of electronic materials, and their applications to devices based on semiconductor surfaces, metal-semiconductor interfaces, and semiconductor heterojunctions. Starting with the fundamentals of electrical measurements on semiconductor interfaces, it then describes the importance of controlling macroscopic electrical properties by atomic-scale techniques. Subsequent chapters present the wide range of surface and interface techniques available to characterize electronic, optical, chemical, and structural propertie

  13. Tengi Interfaces for Tracing between Heterogeneous Components

    DEFF Research Database (Denmark)

    Pfeiffer, Rolf-Helge; Wasowski, Andrzej

    2012-01-01

    , typically general programming languages, provide an interface description mechanism able to specify software com- ponent boundaries. Unfortunately, these interface mechanisms can not express relations for components containing heterogeneous artifacts. We introduce Tengi, a tool that allows...... for the definition of software components containing heterogeneous artifacts. Tengi interfaces link components containing different textual and visual software development artifacts ranging from high-level specification documents to low-level implementation documents. We formally define and implement Tengi...... interfaces, a component algebra and operations on them and present a case study demonstrating Tengi’s capabilities....

  14. A Theoretical Framework for Ecological Interface Design

    DEFF Research Database (Denmark)

    Vicente, Kim J.; Rasmussen, Jens

    1988-01-01

    of the task require. The EID approach extends the concept of direct manipulation inter-faces by taking into account the added complications introduced by complex systems. In this paper, we describe the development of the framework, its theoretical foundations, and examples of its application to various work......A theoretical framework for designing interfaces for complex systems is de-scribed. The framework, called ecological interface design (EID), suggests a set of principles for designing interfaces in a way that supports the funda-mental properties of human cognition. The basis of EID is the skills...

  15. Polymer surfaces, interfaces and thin films

    Energy Technology Data Exchange (ETDEWEB)

    Stamm, M. [Max-Planck-Institut fuer Polymerforschung, Mainz (Germany)

    1996-11-01

    Neutron reflectometry can be used in various ways to investigate surfaces, interfaces and thin films of polymers. Its potential comes mostly from the possibilities offered by selective deuteration, where a particular component can be made visible with respect to its activity at the interface. In addition the depth resolution is much better than with most other direct techniques, and details of the profiles may be resolved. Several examples will be discussed including the segment diffusion at the interface between two polymer films, the determination of the narrow interfaces between incompatible polymer blends and the development of order in thin diblock copolymer films. (author) 10 figs., 2 tabs., 38 refs.

  16. Polymer surfaces, interfaces and thin films

    International Nuclear Information System (INIS)

    Stamm, M.

    1996-01-01

    Neutron reflectometry can be used in various ways to investigate surfaces, interfaces and thin films of polymers. Its potential comes mostly from the possibilities offered by selective deuteration, where a particular component can be made visible with respect to its activity at the interface. In addition the depth resolution is much better than with most other direct techniques, and details of the profiles may be resolved. Several examples will be discussed including the segment diffusion at the interface between two polymer films, the determination of the narrow interfaces between incompatible polymer blends and the development of order in thin diblock copolymer films. (author) 10 figs., 2 tabs., 38 refs

  17. On Building a Search Interface Discovery System

    Science.gov (United States)

    Shestakov, Denis

    A huge portion of the Web known as the deep Web is accessible via search interfaces to myriads of databases on the Web. While relatively good approaches for querying the contents of web databases have been recently proposed, one cannot fully utilize them having most search interfaces unlocated. Thus, the automatic recognition of search interfaces to online databases is crucial for any application accessing the deep Web. This paper describes the architecture of the I-Crawler, a system for finding and classifying search interfaces. The I-Crawler is intentionally designed to be used in the deep web characterization surveys and for constructing directories of deep web resources.

  18. An interface energy density-based theory considering the coherent interface effect in nanomaterials

    Science.gov (United States)

    Yao, Yin; Chen, Shaohua; Fang, Daining

    2017-02-01

    To characterize the coherent interface effect conveniently and feasibly in nanomaterials, a continuum theory is proposed that is based on the concept of the interface free energy density, which is a dominant factor affecting the mechanical properties of the coherent interface in materials of all scales. The effect of the residual strain caused by self-relaxation and the lattice misfit of nanomaterials, as well as that due to the interface deformation induced by an external load on the interface free energy density is considered. In contrast to the existing theories, the stress discontinuity at the interface is characterized by the interface free energy density through an interface-induced traction. As a result, the interface elastic constant introduced in previous theories, which is not easy to determine precisely, is avoided in the present theory. Only the surface energy density of the bulk materials forming the interface, the relaxation parameter induced by surface relaxation, and the mismatch parameter for forming a coherent interface between the two surfaces are involved. All the related parameters are far easier to determine than the interface elastic constants. The effective bulk and shear moduli of a nanoparticle-reinforced nanocomposite are predicted using the proposed theory. Closed-form solutions are achieved, demonstrating the feasibility and convenience of the proposed model for predicting the interface effect in nanomaterials.

  19. Riso na epilepsia

    Directory of Open Access Journals (Sweden)

    Edymar Jardim

    1967-06-01

    Full Text Available São estudados três casos de síndrome convulsiva temporal, com manifestações concomitantes de riso na sua fase inicial. As características principais foram a imotivação e á incoercibilidade do riso. Esses sintomas desapareceram com o uso de anticonvulsivantes.

  20. Biotecnologia na agricultura

    Directory of Open Access Journals (Sweden)

    Helaine Carrer

    2010-01-01

    Full Text Available A expectativa de o crescimento populacional atingir 9 bilhões de habitantes em 2050 em adição às questões da sustentabilidade e do aquecimento global nos desafiam a aumentar a oferta de alimentos. Uma metodologia alternativa que contribua para a redução do impacto desse cenário envolve a biotecnologia, que, nas últimas décadas, trouxe marcantes oportunidades tecnológicas na agricultura, resultando em relevante desenvolvimento na obtenção de novas variedades de plantas, na melhoria da qualidade de diversos alimentos e atualmente também na bioenergia. As técnicas biotecnológicas envolvendo os marcadores moleculares, a genômica e a transformação genética estão transformando a agricultura e são discutidas neste artigo.The expected population growth to reach 9 billion by 2050 in addition to issues of sustainability and global warming challenges us to increase the supply of food. An alternative approach to help reducing the impact of this scenario involves biotechnology which in recent decades has brought remarkable technological opportunities in the agriculture that resulted in relevant development in obtaining new plant varieties, improved quality of different foods, and now also in bioenergy. The biotechnology techniques involving molecular markers, genomics and genetic transformation are transforming agriculture and will be discussed in this article.

  1. Magnetic nanofilms of nickel prepared at the liquid-liquid interface

    International Nuclear Information System (INIS)

    Varghese, Neenu; Rao, C.N.R.

    2011-01-01

    Highlights: → Formation of nickel thinfims at the organic-aqueous interface at room temperature. → Thickness of nanofilm is ∼20 nm. → Ni nanofilms exhibit superparamagnetic behavior. → Thicker Ni films are obtained at a higher temperature (60 o C). -- Abstract: Thin films of metallic nickel with a thickness of the order of 20 nm have been prepared at the organic-aqueous interface at room temperature by the reaction of nickel cupferronate [Ni(C 6 H 5 N 2 O 2 ) 2 ] in toluene medium and sodium borohydride (NaBH 4 ) in aqueous medium. The films were characterized with transmission electron microscopy, scanning electron microscopy and atomic force microscopy. Thicker Ni films could be prepared by carrying out the reaction at the interface at 60 o C. The Ni nanofilms exhibit superparamagnetic behavior.

  2. Interface Everywhere: Further Development of a Gesture and Voice Commanding Interface Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Natural User Interface (NUI) is a term used to describe a number of technologies such as speech recognition, multi-touch, and kinetic interfaces. Gesture and voice...

  3. Brine crude oil interactions at the oil-water interface

    DEFF Research Database (Denmark)

    Chakravarty, Krishna Hara; Fosbøl, Philip Loldrup; Thomsen, Kaj

    2015-01-01

    -, HPO42-, and HCO3- (anions), were studied through gas chromatographic analysis. Crude oil from the North Sea was doped with various fractions of organic acids to mimic different polar behavior. Increased brine concentration showed up to 15% upsurge of polar fractions on the oil-water emulsion formation...... in enhancing oil emulsion formation by increasing interactions between polar acids and brine solutions. The results propose the potential use of HPO42- ions in reservoirs having inactive mineral surfaces. The relative oil affinity of different ions including K+, Na+, Mg2+, and Ca2+ (cations), and Cl-, SO42....... During emulsion formation the relative interactions at the oil-water interface are proved to follow the Hofmeister series: K+emulsion formation was observed. Among anions, SO42- and HPO42- showed optimum...

  4. Moedor de Pixels : interfaces, interações e audiovisual

    OpenAIRE

    Vieira, Jackson Marinho

    2016-01-01

    Moedor de Pixels: interfaces, interações e audiovisual é uma pesquisa teórica e prática sobre obras de arte que empregam meios audiovisuais e computacionais em contextos onde a participação e a interação do público tornam-se o centro da experiência estética. O estudo sugere que a videoarte envolve novos procedimentos na tecnologia do vídeo que deram impulso para explorações mais extensas no campo da arte mídia interativa. A pesquisa também destaca como a inclusão dos meios digitais fornece ex...

  5. Safety and Security Interface Technology Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Michael A. Lehto; Kevin J. Carroll; Dr. Robert Lowrie

    2007-05-01

    Safety and Security Interface Technology Initiative Mr. Kevin J. Carroll Dr. Robert Lowrie, Dr. Micheal Lehto BWXT Y12 NSC Oak Ridge, TN 37831 865-576-2289/865-241-2772 carrollkj@y12.doe.gov Work Objective. Earlier this year, the Energy Facility Contractors Group (EFCOG) was asked to assist in developing options related to acceleration deployment of new security-related technologies to assist meeting design base threat (DBT) needs while also addressing the requirements of 10 CFR 830. NNSA NA-70, one of the working group participants, designated this effort the Safety and Security Interface Technology Initiative (SSIT). Relationship to Workshop Theme. “Supporting Excellence in Operations Through Safety Analysis,” (workshop theme) includes security and safety personnel working together to ensure effective and efficient operations. One of the specific workshop elements listed in the call for papers is “Safeguards/Security Integration with Safety.” This paper speaks directly to this theme. Description of Work. The EFCOG Safety Analysis Working Group (SAWG) and the EFCOG Security Working Group formed a core team to develop an integrated process involving both safety basis and security needs allowing achievement of the DBT objectives while ensuring safety is appropriately considered. This effort garnered significant interest, starting with a two day breakout session of 30 experts at the 2006 Safety Basis Workshop. A core team was formed, and a series of meetings were held to develop that process, including safety and security professionals, both contractor and federal personnel. A pilot exercise held at Idaho National Laboratory (INL) in mid-July 2006 was conducted as a feasibility of concept review. Work Results. The SSIT efforts resulted in a topical report transmitted from EFCOG to DOE/NNSA in August 2006. Elements of the report included: Drivers and Endstate, Control Selections Alternative Analysis Process, Terminology Crosswalk, Safety Basis

  6. The RNA core weakly influences the interactions of the bacteriophage MS2 at key environmental interfaces

    KAUST Repository

    Nguyen, Thanh H.

    2011-01-01

    The effect of the RNA core on interfacial interactions of the bacteriophage MS2 was investigated. After removal of the RNA core, empty intact capsids were characterized and compared to untreated MS2. Electron density of untreated MS2 and RNA-free MS2 were characterized by transmission electron microscopy (TEM) and synchrotron-based small angle spectroscopy (SAXS). Suspensions of both particles exhibited similar electrophoretic mobility across a range of pH values. Similar effects were observed at pH 5.9 across a range of NaCl or CaCl2 concentrations. We compared key interfacial interactions (particle-particle and particle/air-water interface) between suspensions of each type of particle using time resolved dynamic light scattering (TR-DLS) to observe and quantify aggregation kinetics and axisymmetric drop shape analysis to measure adsorption at the air-water interface. Both suspensions showed insignificant aggregation over 4 h in 600 mM NaCl solutions. In the presence of Ca2+ ions, aggregation of both types of particles was consistent with earlier aggregation studies and was characterized by both reaction-limited and diffusion-limited regimes occurring at similar [Ca2+]. However, the removal of the RNA from MS2 had no apparent effect on the aggregation kinetics of particles. Despite some differences in the kinetics of adsorption to the air-water interface, the changes in surface tension which result from particle adsorption showed no difference between the untreated MS2 and RNA-free MS2. The interactions and structure of particles at the air-water interface were further probed using interfacial dilational rheology. The surface elasticity (E s) and surface viscosity (ηs) at the interface were low for both the untreated virus and the RNA-free capsid. This observation suggests that the factors that impact the adsorption kinetics are not important for an equilibrated interface. © 2011 The Royal Society of Chemistry.

  7. Interfacing superconducting qubits and single optical photons

    NARCIS (Netherlands)

    Das, Sumanta; Faez, Sanli; Sørensen, Anders S.

    2016-01-01

    We propose an efficient light-matter interface at optical frequencies between a superconducting qubit and a single photon. The desired interface is based on a hybrid architecture composed of an organic molecule embedded inside an optical waveguide and electrically coupled to a superconducting qubit

  8. An introduction to the COLIN optimization interface.

    Energy Technology Data Exchange (ETDEWEB)

    Hart, William Eugene

    2003-03-01

    We describe COLIN, a Common Optimization Library INterface for C++. COLIN provides C++ template classes that define a generic interface for both optimization problems and optimization solvers. COLIN is specifically designed to facilitate the development of hybrid optimizers, for which one optimizer calls another to solve an optimization subproblem. We illustrate the capabilities of COLIN with an example of a memetic genetic programming solver.

  9. Learning Analytics for Natural User Interfaces

    Science.gov (United States)

    Martinez-Maldonado, Roberto; Shum, Simon Buckingham; Schneider, Bertrand; Charleer, Sven; Klerkx, Joris; Duval, Erik

    2017-01-01

    The continuous advancement of natural user interfaces (NUIs) allows for the development\tof novel and creative ways to support collocated collaborative work in a wide range of areas, including teaching and learning. The use of NUIs, such as those based on interactive multi-touch surfaces and tangible user interfaces (TUIs), can offer unique…

  10. Gestures in an Intelligent User Interface

    NARCIS (Netherlands)

    Fikkert, F.W.; van der Vet, P.E.; Nijholt, Antinus; Shao, Ling; Shan, Caifeng; Luo, Jiebo; Etoh, Minoru

    2010-01-01

    In this chapter we investigated which hand gestures are intuitive to control a large display multimedia interface from a user’s perspective. Over the course of two sequential user evaluations we defined a simple gesture set that allows users to fully control a large display multimedia interface,

  11. A Smart Material Interfaces Learning Experience

    NARCIS (Netherlands)

    Minuto, A.; Pittarello, Fabio; Nijholt, Antinus

    2015-01-01

    This paper describes a learning experience held with a class of primary school children who were introduced to a novel class of resources, named smart materials, and the interfaces built with them (Smart Material Interfaces). The pupils were guided along a multidisciplinary educational path in which

  12. Modeling the electrified solid-liquid interface

    DEFF Research Database (Denmark)

    Rossmeisl, Jan; Skulason, Egill; Björketun, Mårten

    2008-01-01

    A detailed atomistic model based on density functional theory calculations is presented of the charged solid-electrolyte interface. Having protons solvated in a water bilayer outside a Pt(111) slab with excess electrons, we show how the interface capacitance is well described and how the work...

  13. Core-shell particles at fluid interfaces

    NARCIS (Netherlands)

    Buchcic, C.

    2016-01-01

    There is a growing interest in the use of particles as stabilizers for foams and emulsions. Applying hard particles for stabilization of fluid interface is referred to as Pickering stabilization. By using hard particles instead of surfactants and polymers, fluid interfaces can be effectively

  14. Photonics surface waves on metamaterials interfaces

    DEFF Research Database (Denmark)

    Takayama, Osamu; Bogdanov, Andrey; Lavrinenko, Andrei V

    2017-01-01

    A surface wave (SW) in optics is a light wave, which is supported at an interface of two dissimilar media and propagates along the interface with its field amplitude exponentially decaying away from the boundary. The research on surface waves has been flourishing in last few decades thanks to the...

  15. Coded Schemes for Asymmetric Wireless Interfaces

    DEFF Research Database (Denmark)

    Moreira, André; Roetter, Daniel Enrique Lucani

    2015-01-01

    system with full duplex interfaces. Our second goal is to understand the practical implications of these results by designing a protocol for file transmissions, implement it in Android smart phones, and measure its performance when combining various interfaces, including, Bluetooth, WiFi, and 3G cellular...

  16. A Systems Design Course Emphasizing Interfaces

    DEFF Research Database (Denmark)

    Staunstrup, Jørgen

    1997-01-01

    This paper describes an experimental course where students develop a (small) system focusing on the interfaces between different components of the system. The components are developed independently of each other using web based documentation and focusing on techniques for modeling and analysis...... of interfaces. These techniques are supported by prototype tools...

  17. Graphic Interface for LCP2 Optimization Program

    DEFF Research Database (Denmark)

    Nicolae, Taropa Laurentiu; Gaunholt, Hans

    1998-01-01

    This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extensions...

  18. Spent Nuclear Fuel project interface control plan

    International Nuclear Information System (INIS)

    Reilly, M.A.

    1995-01-01

    This implementation process philosophy is in keeping with the ongoing reengineering of the WHC Controlled Manuals to achieve interface control within the SNF Project. This plan applies to all SNF Project sub-project to sub-project, and sub-project to exteranl (both on and off the Hanford Site) interfaces

  19. User Interface Design for Dynamic Geometry Software

    Science.gov (United States)

    Kortenkamp, Ulrich; Dohrmann, Christian

    2010-01-01

    In this article we describe long-standing user interface issues with Dynamic Geometry Software and common approaches to address them. We describe first prototypes of multi-touch-capable DGS. We also give some hints on the educational benefits of proper user interface design.

  20. An Architectural Experience for Interface Design

    Science.gov (United States)

    Gong, Susan P.

    2016-01-01

    The problem of human-computer interface design was brought to the foreground with the emergence of the personal computer, the increasing complexity of electronic systems, and the need to accommodate the human operator in these systems. With each new technological generation discovering the interface design problems of its own technologies, initial…

  1. Advanced Stellar Compass, CHAMP, Interface Control Document

    DEFF Research Database (Denmark)

    Madsen, Peter Buch; Jørgensen, John Leif; Betto, Maurizio

    1999-01-01

    The German government research establishment "GeoForschungsZentrum" developed under a contract to the German government a microsatellite named "Champ". The Space Instrumentation Group has made a Interface Control Document for the CHAMP, witch describes the Star Imager, the electrical interface...

  2. Peptide segments in protein-protein interfaces

    Indian Academy of Sciences (India)

    Prakash

    2006-09-06

    Sep 6, 2006 ... a living organism – namely, in cellular architecture, signal transduction, biosynthetic and degradation pathways and their regulations, immune response etc. ..... a linear classification scheme. 80% of the homodimeric interfaces lie above the line shown in figure 7 and 91% of the crystal interfaces lie below it.

  3. Characterisation of interfaces in nanocrystalline palladium

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Characterisation of interfaces in nanocrystalline palladium. 49. Interface structures in nanocrystalline materials have been the subject of research from the very beginning. The first indication that the structure of grain boundaries in nanocrystalline materials was different was from the X-ray diffraction (XRD) studies of Zhu et al ...

  4. A phase transition for competition interfaces

    NARCIS (Netherlands)

    Ferrari, P.A.; Martin, J.B.; Pimentel, L.P.R.

    2009-01-01

    We study the competition interface between two growing clusters in a growth model associated to last-passage percolation. When the initial unoccupied set is approximately a cone, we show that this interface has an asymptotic direction with probability 1. The behavior of this direction depends on the

  5. Interface failure by cavity growth to coalescence

    DEFF Research Database (Denmark)

    Tvergaard, Viggo

    2000-01-01

    For a thin metal layer between ceramics ductile failure by the growth of voids along one of the interfaces is studied numerically. An axisymmetric cell model is used to represent an array of uniformly distributed hemispherical interface voids. The bonding to the ceramics gives rise to highly...

  6. Structure and properties of interfaces in ceramics

    International Nuclear Information System (INIS)

    Bonnell, D.; Ruehle, M.; Chowdhry, U.

    1995-01-01

    The motivation for the symposium was the observation that interfaces in crystallographically and compositionally complex systems often dictate the performance and reliability of devices that utilize functional ceramics. The current level of understanding of interface-property relations in silicon-based devices required over 30 years of intensive research. Similar issues influence the relationship between atomic bonding at interfaces and properties in functional ceramic systems. The current understanding of these complex interfaces does not allow correlation between atomic structure and interface properties, in spite of their importance to a number of emerging technologies (wireless communications, radar-based positioning systems, sensors, etc.). The objective of this symposium was to focus attention on these fundamental issues by featuring recent theoretical and experimental work from various disciplines that impact the understanding of interface chemistry, structure, and properties. The emphasis was on relating properties of surfaces and interfaces to structure through an understanding of atomic level phenomena. Interfaces of interest include metal/ceramic, ceramic/ceramic, ceramic/vapor, etc., in electronic, magnetic, optical, ferroelectric, piezoelectric, and dielectric applications. Sixty one papers have been processed separately for inclusion on the data base

  7. Interface Yang-Mills, supersymmetry, and Janus

    Energy Technology Data Exchange (ETDEWEB)

    D' Hoker, Eric [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Estes, John [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Gutperle, Michael [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States)]. E-mail: gutperle@physics.ucla.edu

    2006-10-02

    We consider theories consisting of a planar interface with N=4 super-Yang-Mills on either side and varying gauge coupling across the interface. The interface does not carry any independent degrees of freedom, but is allowed to support local gauge invariant operators, included with independent interface couplings. In general, both conformal symmetry and supersymmetry will be broken, but for special arrangements of the interface couplings, these symmetries may be restored. We provide a systematic classification of all allowed interface supersymmetries. We find new theories preserving eight and four Poincare supersymmetries, which get extended to sixteen and eight supersymmetries in the conformal limit, respectively with SU(2)xSU(2), SO(2)xSU(2) internal symmetry. The Lagrangians for these theories are explicitly constructed. We also recover the theory with two Poincare supersymmetries and SU(3) internal symmetry proposed earlier as a candidate CFT dual to super-Janus. Since our new interface theories have only operators from the supergravity multiplet turned on, dual supergravity solutions are expected to exist. We speculate on the possible relation between the interface theory with maximal supersymmetry and the near-horizon limit of the D3-D5 system.

  8. XML Interfaces to the Internet of Things

    NARCIS (Netherlands)

    S. Pemberton (Steven); C Foster

    2015-01-01

    htmlabstractThe internet of things is predicated on tiny, cheap, lower power computers being embedded in devices everywhere. However such tiny devices by definition have very little memory and computing power available to support user interfaces or extended servers, and so the user interface

  9. Two-wire Interface for Digital Microphones

    NARCIS (Netherlands)

    Groothedde, Wouter; Klumperink, Eric A.M.; Nauta, Bram; Eschauzier, Rudolphe Gustave Hubertus; van Rijn, Nico

    2003-01-01

    A two-wire interface for a digital microphone circuit includes a power line and a ground line. The interface utilizes the ground line as a "voltage active line" to transmit both clock and data signals between the digital microphone circuit and a receiving circuit. The digital microphone circuit

  10. Two-Wire interface for digital microphones

    NARCIS (Netherlands)

    Groothedde, Wouter; Klumperink, Eric A.M.; Nauta, Bram; Eschauzier, Rudolphe Gustave Hubertus; van Rijn, Nico

    2005-01-01

    A two-wire interface for a digital microphone circuit includes a power line and a ground line. The interface utilizes the ground line as a "voltage active line" to transmit both clock and data signals between the digital microphone circuit and a receiving circuit. The digital microphone circuit

  11. Safety and Security Interface Technology Initiative

    International Nuclear Information System (INIS)

    Dr. Michael A. Lehto; Kevin J. Carroll; Dr. Robert Lowrie

    2007-01-01

    Earlier this year, the Energy Facility Contractors Group (EFCOG) was asked to assist in developing options related to acceleration deployment of new security-related technologies to assist meeting design base threat (DBT) needs while also addressing the requirements of 10 CFR 830. NNSA NA-70, one of the working group participants, designated this effort the Safety and Security Interface Technology Initiative (SSIT). Relationship to Workshop Theme. ''Supporting Excellence in Operations Through Safety Analysis'', (workshop theme) includes security and safety personnel working together to ensure effective and efficient operations. One of the specific workshop elements listed in the call for papers is ''Safeguards/Security Integration with Safety''. This paper speaks directly to this theme. Description of Work. The EFCOG Safety Analysis Working Group (SAWG) and the EFCOG Security Working Group formed a core team to develop an integrated process involving both safety basis and security needs allowing achievement of the DBT objectives while ensuring safety is appropriately considered. This effort garnered significant interest, starting with a two day breakout session of 30 experts at the 2006 Safety Basis Workshop. A core team was formed, and a series of meetings were held to develop that process, including safety and security professionals, both contractor and federal personnel. A pilot exercise held at Idaho National Laboratory (INL) in mid-July 2006 was conducted as a feasibility of concept review. Work Results. The SSIT efforts resulted in a topical report transmitted from EFCOG to DOE/NNSA in August 2006. Elements of the report included: Drivers and Endstate, Control Selections Alternative Analysis Process, Terminology Crosswalk, Safety Basis/Security Documentation Integration, Configuration Control, and development of a shared ''tool box'' of information/successes. Specific Benefits. The expectation or end state resulting from the topical report and associated

  12. Design and Realization of Universal Data Interface

    Directory of Open Access Journals (Sweden)

    Jong-Woo Kim

    2005-03-01

    Full Text Available KARI studied data interface of Space Applications for developing Space Experimental Instrument in International Space Station, designed, and manufactured the UDIS (International Sapce Station Universal Data Interface simulator according to requirements of the data interface. This paper explains the design and implementation of UDIS for space application. UDIS is the instrument which simulate to interface the data from ISS to experiment module, payload and habitation module and use the development of a experiment system in the space. This simulator will be used to the GSE (Ground Support Equipment for test of experiment system. By realization of the simulator, we ensure data interface skills for a manned-space data communication system.

  13. [Interfaces in outpatient and inpatient rheumatological treatment].

    Science.gov (United States)

    Edelmann, E

    2014-08-01

    In healthcare the term interface describes the communication and the sharing of responsibilities between different aspects of medical care und the different professional groups in medicine. It enables cooperation without conflicts and can contribute to an improvement of healthcare and reduce healthcare costs. The postgraduate professional education, medical guidelines and therapy recommendations are an important basis for the definition of interfaces. The definition of such an interface between different healthcare groups is essential for the implementation of selective contracts with health insurance companies. An appropriate health care interface between general practitioners and rheumatologists has been defined as well as between hospital and ambulant rheumatology treatment. The division of responsibilities between orthopedists and rheumatologists is still under discussion. A proposal for such an interface from the point of view of rheumatology is presented.

  14. Integrating interface slicing into software engineering processes

    Science.gov (United States)

    Beck, Jon

    1993-01-01

    Interface slicing is a tool which was developed to facilitate software engineering. As previously presented, it was described in terms of its techniques and mechanisms. The integration of interface slicing into specific software engineering activities is considered by discussing a number of potential applications of interface slicing. The applications discussed specifically address the problems, issues, or concerns raised in a previous project. Because a complete interface slicer is still under development, these applications must be phrased in future tenses. Nonetheless, the interface slicing techniques which were presented can be implemented using current compiler and static analysis technology. Whether implemented as a standalone tool or as a module in an integrated development or reverse engineering environment, they require analysis no more complex than that required for current system development environments. By contrast, conventional slicing is a methodology which, while showing much promise and intuitive appeal, has yet to be fully implemented in a production language environment despite 12 years of development.

  15. Potential Interface Issues in Spent Fuel Management

    International Nuclear Information System (INIS)

    2015-10-01

    This publication is an output of a series of meetings to identify and evaluate issues and opportunities associated with interfaces in the back end of the fuel cycle (BEFC) and to describe effective management approaches based on the experience of Member States. During the meetings, participants from Member States and other international organizations shared and evaluated the main interfaces and potential interface issues among the spent fuel storage, transport, reprocessing and disposal of the BEFC, and also reviewed the national approaches to addressing these issues. The aim of this publication is to provide an approach to identify the interfaces in the BEFC as well as the potential issues that should be addressed. It also aims at responding to the solutions Member States most often find to be effective and, in some cases, were adjusted or revisited to reach the fixed target. Most of the interfaces and issues are country specific, as evidenced by the variety and diversity of examples provided in this publication

  16. Analysis of the interface tracking errors

    International Nuclear Information System (INIS)

    Cerne, G.; Tiselj, I.; Petelin, S.

    2001-01-01

    An important limitation of the interface-tracking algorithm is the grid density, which determines the space scale of the surface tracking. In this paper the analysis of the interface tracking errors, which occur in a dispersed flow, is performed for the VOF interface tracking method. A few simple two-fluid tests are proposed for the investigation of the interface tracking errors and their grid dependence. When the grid density becomes too coarse to follow the interface changes, the errors can be reduced either by using denser nodalization or by switching to the two-fluid model during the simulation. Both solutions are analyzed and compared on a simple vortex-flow test.(author)

  17. Tendon Gradient Mineralization for Tendon to Bone Interface Integration

    Science.gov (United States)

    Qu, Jin; Thoreson, Andrew R.; Chen, Qingshan; An, Kai-Nan; Amadio, Peter C.; Zhao, Chunfeng

    2014-01-01

    Tendon-to-bone integration is a great challenge for tendon or ligament reconstruction regardless of use of autograft or allograft tendons. We mineralized the tendon, thus transforming the tendon-to-bone into a “bone-to-bone” interface for healing. Sixty dog flexor digitorum profundus (FDP) tendons were divided randomly into 5 groups: 1) normal FDP tendon, 2) CaP (Non-extraction and mineralization without fetuin), 3) CaPEXT (Extraction by Na2HPO4 and mineralization without fetuin), 4) CaPFetuin (Non-extraction and mineralization with fetuin), and 5) CaPEXTFetuin (Extraction and mineralization with fetuin). The calcium and phosphate content significantly increased in tendons treated with combination of extraction and fetuin compared to the other treatments. Histology also revealed a dense mineral deposition throughout the tendon outer layers and penetrated into the tendon to a depth of 200 μm in a graded manner. Compressive moduli were significantly lower in the four mineralized groups compared with normal control group. No significant differences in maximum failure strength or stiffness were found in the suture pull-out test among all groups. Mineralization of tendon alters the interface from tendon to bone into mineralized tendon to bone, which may facilitate tendon-to-bone junction healing following tendon or ligament reconstruction. PMID:23939935

  18. The diamond/aqueous electrolyte interface: an impedance investigation.

    Science.gov (United States)

    Garrido, Jose A; Nowy, Stefan; Härtl, Andreas; Stutzmann, Martin

    2008-04-15

    We have investigated the electrochemical interface between diamond electrodes and aqueous electrolytes using electrochemical techniques such as cyclic voltammetry and ac impedance spectroscopy. High-quality CVD-grown boron-doped polycrystalline diamond electrodes and IIa single crystalline natural diamond electrodes have been used in this study. In the case of hydrogen-terminated diamond electrodes, the electrochemical interface is dominated by the electrochemical double layer. Frequency-dependent impedance spectroscopy reveals a potential regime in which the contribution of ion adsorption becomes relevant. We have conducted experiments to evaluate the effect of pH and ionic strength on the double layer. Our results suggest that only ions resulting from water auto-dissociation, i.e., hydroxide and hydronium ions, are responsible for ion adsorption and, thus, able to modify the charge at the double layer. In contrast, no effect of the adsorption of several dissolved ions (such as Na+, K+, Cl-) has been observed On the basis of the electrochemical characterization of H-terminated diamond surfaces, we also discuss the phenomenon of the surface conductivity in diamond, as well as the pH sensitivity of the diamond surface. The influence of the O2/OH- and H2/H3O+ redox couples on the origin of the surface conductivity is discussed.

  19. Hidroma subdural na fossa posterior

    Directory of Open Access Journals (Sweden)

    José Carlos Vasques

    1970-03-01

    Full Text Available Os autores relatam um caso de hidroma subdural na fossa craniana posterior conseqüente a traumatismo na região occipital. O paciente foi operado com pleno sucesso. A raridade da localização de hidroma na fossa posterior é salientada, sendo discutidos os possíveis mecanismos etio-patogênicos.

  20. Thermal coupling at aqueous and biomolecular interfaces

    Science.gov (United States)

    Shenogina, Natalia B.

    Heat flow in the materials with nanoscopic features is dominated by thermal properties of the interfaces. While thermal properties of the solid-solid and solid-liquid interfaces are well studied, research of the thermal transport properties across soft (liquid-liquid) interfaces is very limited. Such interfaces are, however, plentiful in biological systems. In such systems the temperature control is of a great importance, because biochemical reactions, conformation of biomolecules as well as processes in biological cells and membranes have strong temperature sensitivity. The critical ingredient to temperature control in biological systems is the understanding of heat flow and thermal coupling across soft interfaces. To investigate heat transfer across biological and aqueous interfaces we chose to study a number of soft interfacial systems by means of molecular dynamic simulations. One of the interfaces under our investigation is the interface between protein (specifically green fluorescent protein) and water. Using this model we concentrated on the importance of vibrational frequency on coupling between water and proteins, and on significant differences between the roles of low and high frequency vibrations. Our thermal interfacial analysis allowed us to shed new light on to the issue of protein to water slaving, i.e., the concept of water controlling protein dynamics. Considering that the surface of the protein is composed of a complicated mixture of the hydrophobic and hydrophilic domains, to systematically explore the role of interfacial interactions we studied less complicated models with homogenous interfaces whith interfacial chemistry that could be changed in a controlled manner. We demonstrated that thermal transport measurements can be used to probe interfacial environments and to quantify interfacial bonding strength. Such ability provides a unique opportunity to characterize a variety of interfaces, which can be difficult to achieve with more direct

  1. Emergent Phenomena at Oxide Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, H.Y.

    2012-02-16

    spin operator changes sign with T-operation. (iii) Gauge symmetry (G), which is associated with a change in the phase of the wave-function as {Psi} {yields} e{sup i{theta}}{Psi}. Gauge symmetry is connected to the law of charge conservation, and broken G-symmetry corresponds to superconductivity/superfluidity. To summarize, the interplay among these electronic degrees of freedom produces various forms of symmetry breaking patterns of I, T, and G, leading to novel emergent phenomena, which can appear only by the collective behavior of electrons and cannot be expected from individual electrons. Figure 1 shows this schematically by means of several representative phenomena. From this viewpoint, the interfaces of TMOs offer a unique and important laboratory because I is already broken by the structure itself, and the detailed form of broken I-symmetry can often be designed. Also, two-dimensionality usually enhances the effects of electron correlations by reducing their kinetic energy. These two features of oxide interfaces produce many novel effects and functions that cannot be attained in bulk form. Given that the electromagnetic responses are a major source of the physical properties of solids, and new gauge structures often appear in correlated electronic systems, we put 'emergent electromagnetism' at the center of Fig. 1.

  2. High Integrity Can Design Interfaces

    International Nuclear Information System (INIS)

    Shaber, E.L.

    1998-01-01

    The National Spent Nuclear Fuel Program is chartered with facilitating the disposition of DOE-owned spent nuclear fuel to allow disposal at a geologic repository. This is done through coordination with the repository program and by assisting DOE Site owners of SNF with needed information, standardized requirements, packaging approaches, etc. The High Integrity Can (HIC) will be manufactured to provide a substitute or barrier enhancement for normal fuel geometry and cladding. The can would be nested inside the DOE standardized canister which is designed to interface with the repository waste package. The HIC approach may provide the following benefits over typical canning approaches for DOE SNF. (a) It allows ready calculation and management of criticality issues for miscellaneous. (b) It segments and further isolates damaged or otherwise problem materials from normal SNF in the repository package. (c) It provides a very long term corrosion barrier. (d) It provides an extra internal pressure barrier for particulates, gaseous fission products, hydrogen, and water vapor. (e) It delays any potential release of fission products to the repository environment. (f) It maintains an additional level of fuel geometry control during design basis accidents, rock-fall, and seismic events. (g) When seal welded, it could provide the additional containment required for shipments involving plutonium content in excess of 20 Ci. (10 CFR 71.63.b) if integrated with an appropriate cask design. Long term corrosion protection is central to the HIC concept. The material selected for the HIC (Hastelloy C-22) has undergone extensive testing for repository service. The most severe theoretical interactions between iron, repository water containing chlorides and other repository construction materials have been tested. These expected chemical species have not been shown capable of corroding the selected HIC material. Therefore, the HIC should provide a significant barrier to DOE SNF dispersal

  3. Apple cuticle: the perfect interface

    Science.gov (United States)

    Curry, Eric; Arey, Bruce

    2010-06-01

    The domestic apple might well be called an 'extreme' fruit. In the arid Northwest United States, the fruit often tolerates surface temperatures ranging from -2 °C in the early spring to 50 °C in the heat of summer, and again to -2 °C during controlled postharvest storage for up to 12 months. During its 18-month existence, the apple maintains a cuticle that is dynamic and environmentally responsive to protect against 1) cellular water loss during desiccation stress and 2) excessive uptake of standing surface moisture. Physiological disorders of the peel such as russeting, cracking, splitting, flecking and lenticel marking, develop as epidermal cells respond to rapid changes in ambient conditions at specific developmental stages during the growing season. Resultant market losses underlie research investigating the nature of apple cuticle growth and development. Ultrastructural analysis of the pro-cuticle using scanning electron microscopy indicates an overlapping network of lipid-based distally-elongating microtubules--produced by and connected to epidermal cells--which co-polymerize to form an organic solvent-insoluble semi-permeable cutin matrix. Microtubule elongation, aggregation, and polymerization function together as long as the fruit continues to enlarge. The nature of lipid transport from the epidermal cells through the cell wall to become part of the cuticular matrix was explored using an FEI Helios NanoLabTM DualBeamTM focused ion beam/scanning electron microscope on chemically- and cryo-fixed peel tissue from mature or freshly harvested apples. Based on microtubule dimensions, regular projections found at the cell/cuticle interface suggest an array of microtubule-like structures associated with the epidermal cell.

  4. Chandra Source Catalog: User Interface

    Science.gov (United States)

    Bonaventura, Nina; Evans, Ian N.; Rots, Arnold H.; Tibbetts, Michael S.; van Stone, David W.; Zografou, Panagoula; Primini, Francis A.; Glotfelty, Kenny J.; Anderson, Craig S.; Chen, Judy C.; Davis, John E.; Doe, Stephen M.; Evans, Janet D.; Fabbiano, Giuseppina; Galle, Elizabeth C.; Gibbs, Danny G., II; Grier, John D.; Hain, Roger; Hall, Diane M.; Harbo, Peter N.; He, Helen; Houck, John C.; Karovska, Margarita; Kashyap, Vinay L.; Lauer, Jennifer; McCollough, Michael L.; McDowell, Jonathan C.; Miller, Joseph B.; Mitschang, Arik W.; Morgan, Douglas L.; Mossman, Amy E.; Nichols, Joy S.; Nowak, Michael A.; Plummer, David A.; Refsdal, Brian L.; Siemiginowska, Aneta L.; Sundheim, Beth A.; Winkelman, Sherry L.

    2009-09-01

    The Chandra Source Catalog (CSC) is intended to be the definitive catalog of all X-ray sources detected by Chandra. For each source, the CSC provides positions and multi-band fluxes, as well as derived spatial, spectral, and temporal source properties. Full-field and source region data products are also available, including images, photon event lists, light curves, and spectra. The Chandra X-ray Center CSC website (http://cxc.harvard.edu/csc/) is the place to visit for high-level descriptions of each source property and data product included in the catalog, along with other useful information, such as step-by-step catalog tutorials, answers to FAQs, and a thorough summary of the catalog statistical characterization. Eight categories of detailed catalog documents may be accessed from the navigation bar on most of the 50+ CSC pages; these categories are: About the Catalog, Creating the Catalog, Using the Catalog, Catalog Columns, Column Descriptions, Documents, Conferences, and Useful Links. There are also prominent links to CSCview, the CSC data access GUI, and related help documentation, as well as a tutorial for using the new CSC/Google Earth interface. Catalog source properties are presented in seven scientific categories, within two table views: the Master Source and Source Observations tables. Each X-ray source has one ``master source'' entry and one or more ``source observation'' entries, the details of which are documented on the CSC ``Catalog Columns'' pages. The master source properties represent the best estimates of the properties of a source; these are extensively described on the following pages of the website: Position and Position Errors, Source Flags, Source Extent and Errors, Source Fluxes, Source Significance, Spectral Properties, and Source Variability. The eight tutorials (``threads'') available on the website serve as a collective guide for accessing, understanding, and manipulating the source properties and data products provided by the catalog.

  5. Innovative interfaces for Serious Games

    Directory of Open Access Journals (Sweden)

    J. Marco

    2015-11-01

    Full Text Available The tangible interaction approach has, in recent years, become a promising alternative to tactile interaction for very young children. Children playing with Tangible User Interfaces (TUI are motivated by the novel and digital environment and benefit from the same values as conventional physical playing. Young children build their mental image of the world through action and motor responses and, with physical handling, they become conscious of reality. Within TUIs, digitally augmented surfaces (interactive blackboards and tabletops are becoming popular in educative environments. Tabletop devices are horizontal surfaces capable of supporting interaction and image feedback on their surface, and are especially interesting for reinforcing face-to-face social relations and group activities. However, most of current children-oriented applications for tabletops are based on tactile interaction, thus losing the benefits of physical playing. The paper describes our experiences building tangible tabletops, and designing tangible games and toys. In particular, we present NIKVision, a tabletop device intended to give leisure and fun while reinforcing physical manipulation and colocated gaming for 3-6 year old children. Several hybrid (physical/digital games based on the manipulation of passive and active toys have been developed for NIKVision. From our experience several useful lessons can be extracted. Among them, the necessity of bridging the gap between designers and developers making it easier the prototyping of tabletop games stands out. To tackle this difficulty a toolkit for the prototyping of tabletop games called ToyVision has been created. The toolkit supports designers to fully explore the physical feasibilities of the manipulation of physical playing pieces, while minimizing the technical difficulties of implementing tabletop games based on physical manipulation. This way, NIKVision and ToyVision are becoming powerful tools to develop innovative

  6. High Integrity Can Design Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Shaber, E.L.

    1998-08-01

    The National Spent Nuclear Fuel Program is chartered with facilitating the disposition of DOE-owned spent nuclear fuel to allow disposal at a geologic repository. This is done through coordination with the repository program and by assisting DOE Site owners of SNF with needed information, standardized requirements, packaging approaches, etc. The High Integrity Can (HIC) will be manufactured to provide a substitute or barrier enhancement for normal fuel geometry and cladding. The can would be nested inside the DOE standardized canister which is designed to interface with the repository waste package. The HIC approach may provide the following benefits over typical canning approaches for DOE SNF. (a) It allows ready calculation and management of criticality issues for miscellaneous. (b) It segments and further isolates damaged or otherwise problem materials from normal SNF in the repository package. (c) It provides a very long term corrosion barrier. (d) It provides an extra internal pressure barrier for particulates, gaseous fission products, hydrogen, and water vapor. (e) It delays any potential release of fission products to the repository environment. (f) It maintains an additional level of fuel geometry control during design basis accidents, rock-fall, and seismic events. (g) When seal welded, it could provide the additional containment required for shipments involving plutonium content in excess of 20 Ci. (10 CFR 71.63.b) if integrated with an appropriate cask design. Long term corrosion protection is central to the HIC concept. The material selected for the HIC (Hastelloy C-22) has undergone extensive testing for repository service. The most severe theoretical interactions between iron, repository water containing chlorides and other repository construction materials have been tested. These expected chemical species have not been shown capable of corroding the selected HIC material. Therefore, the HIC should provide a significant barrier to DOE SNF dispersal

  7. Invasive Intraneural Interfaces: Foreign Body Reaction Issues

    Directory of Open Access Journals (Sweden)

    Fiorenza Lotti

    2017-09-01

    Full Text Available Intraneural interfaces are stimulation/registration devices designed to couple the peripheral nervous system (PNS with the environment. Over the last years, their use has increased in a wide range of applications, such as the control of a new generation of neural-interfaced prostheses. At present, the success of this technology is limited by an electrical impedance increase, due to an inflammatory response called foreign body reaction (FBR, which leads to the formation of a fibrotic tissue around the interface, eventually causing an inefficient transduction of the electrical signal. Based on recent developments in biomaterials and inflammatory/fibrotic pathologies, we explore and select the biological solutions that might be adopted in the neural interfaces FBR context: modifications of the interface surface, such as organic and synthetic coatings; the use of specific drugs or molecular biology tools to target the microenvironment around the interface; the development of bio-engineered-scaffold to reduce immune response and promote interface-tissue integration. By linking what we believe are the major crucial steps of the FBR process with related solutions, we point out the main issues that future research has to focus on: biocompatibility without losing signal conduction properties, good reproducible in vitro/in vivo models, drugs exhaustion and undesired side effects. The underlined pros and cons of proposed solutions show clearly the importance of a better understanding of all the molecular and cellular pathways involved and the need of a multi-target action based on a bio-engineered combination approach.

  8. The utility perspective on the transportation interface

    International Nuclear Information System (INIS)

    Bishop, R.W.

    1986-01-01

    Describing interface between the transportation system and the operating plants, the author thinks there are really three, interrelated dimensions to the interface; the technical; physical interface; the business (i.e. economic) interface; and the institutional interface. A principal mission of the Nuclear Transportation Group is to help assure that these interfaces are smoothly bridged and that the resources of the utility industry are brought to bear to achieve this result. The physical interface is the most readily understood. The analysis must also consider the ALARA (As Low As Reasonably Achievable) radiation exposure evaluation of the waste system design and operation. ALARA evaluations of the waste system design and operation. ALARA evaluations must be done on a systems basis to ensure that the effects of particular designs that may be beneficial in some aspects of the system do not adversely impact nuclear power plant workers or operations. Regardless of one's political persuasion or technical training, the author doesn't think there is any question that spent fuel must be moved, sooner or later, somewhere. It's in the best interests of all that those shipments be made safely, and economically, with the proper attention to doing it right and not needlessly wasting resources, including money

  9. A epilepsia na neurocisticercose

    Directory of Open Access Journals (Sweden)

    Luís Marques-Assis

    1972-12-01

    Full Text Available Foram estudados 131 casos de epilepsia com etiologia cisticercótica comprovada. A idade variou de 2 a 68 anos; 75 pacientes eram de sexo masculino e 56 de sexo feminino; 117 eram brancos, 10 pardos, três pretos e um amarelo. A idade de início da doença predominou na primeira década. O estudo foi feito em relação ao tipo de epilepsia, ao tempo decorrido após a primeira crise, à freqüência das crises e ao eletrencefalograma relativamente às epilepsias em geral. Investigação foi feita também em relação à cefaléia, aos achados neurológicos, liquóricos, radiológicos simples e contrastados e anátomo-patológicos. A análise dos resultados permitiu aos autores as seguintes conclusões: 1 No grupo de neurocisticercose o início da doença predominou na primeira e a partir da quarta década em relação às epilepsias em geral. 2 Dentre as manifestações clínicas predominaram as formas convulsivas da doença (61%, sendo as crises bravas-jacksonianas as menos freqüentes (4%; quando comparadas com as epilepsias em geral, verifica-se incidência menor das convulsões generalizadas na neurocisticercose. 3 Quanto ao tempo de doença, verifica-se predomínio das formas de duração mais curta (um ano ou menos na neurocisticercose. 4 A severidade da epilepsia, traduzida pela freqüência das crises, foi menor no grupo com neurocisticercose. 5 Excluídos os casos com anormalidades eletrencefalográficas contínuas, foram encontrados maiores índices percentuais de EEG normal na neurocisticercose que nas epilepsias em geral. 6 A cefaléia estava presente em 68% dos casos, assumindo caráter paroxístico na maior parte (78%; em 67% dos casos com cefaléia paroxística não havia concomitantemente sinais de hipertensão intracraniana; nos casos com cefaléia contínua, em apenas dois (13% esses sinais não estavam presentes. 7 Na maior parte dos casos (62% as manifestações epilépticas se apresentaram isoladamente, sem sinais neurol

  10. Radiation Effects in Interfaces and Thin Films

    Science.gov (United States)

    Mairov, Alexander

    One of the key approaches to developing materials with greater radiation damage resistance is to introduce a large fraction of internal interfaces. Interfaces act as sinks for recombination of radiation-induced defects and as sites for accumulation of helium bubbles, thereby diverting them away from grain boundaries, where they can induce embrittlement. The beneficial role of interfaces in mitigating radiation damage has been demonstrated in nanoscale multilayered structures and in nanograined materials. Another more common example is oxide dispersion strengthened (ODS) steels and nanostructured ferritic alloys (NFA) where a fine distribution of particles (clusters) of varying stoichiometries (e.g., Y2Ti2O7, Y2TiO 5, Y2O3, TiO2 and Y-Ti-O non-stoichiometric oxides) not only confer high creep strength, but also high radiation damage tolerance due to the large area of metal/oxide interfaces. However, the efficacy of these interfaces to act as defect sinks depends on their compositional and physical stability under radiation. With this background, this work focused on the stability of interfaces between Ti, TiO2, and Y2O 3 thin film deposited on Fe-12%Cr substrates after irradiation with 5MeV Ni+2 ions at various temperatures. TEM and STEM-EDS methods were used to understand the compositional changes at the interfaces. Additionally, accumulation of implanted helium at epitaxial and non-epitaxial Fe/Y 2O3 interfaces was also studied. Finally, the study was extended to study irradiation effects (up to 150 dpa) in novel Al2O 3 nanoceramic films with immediate potential applications as coatings for corrosion protection in the harsh high temperature environments of Gen IV reactors. This research is expected to have implications in the development of radiation damage tolerant nanostructured alloys for nuclear reactors while also expanding the scientific knowledge-base in the area of radiation stability of interfaces in solids and protective coatings.

  11. Procedimento para seleção de interfaces para produtos modulares baseado no ciclo de projeto de produtos Procedure for interface selection for modular products based on the product design cycle

    Directory of Open Access Journals (Sweden)

    Régis Kovacs Scalice

    2012-12-01

    Full Text Available Este artigo aborda a definição de alternativas de interfaces durante desenvolvimento de produtos modulares. Entende-se por interfaces a fronteira entre os módulos que compõem o produto, bem como as interações existentes entre o meio-ambiente em que o produto está inserido e com seus possíveis usuários. Para realizar o projeto de interfaces é proposto um procedimento que auxilia na concepção de alternativas e em sua priorização, de forma a facilitar a tomada de decisão por parte da equipe de projeto. O procedimento proposto foi validado por sua aplicação no desenvolvimento de produtos modulares para o cultivo e beneficiamento de mexilhões em Santa Catarina. Os resultados obtidos demonstram o potencial da ferramenta.This paper deals with the definition of interface alternatives during the development of modular products. Interfaces could be seen as the boundary between modules, as well the existing interactions with the surrounding environment and possible users. In order to carry out interface design, a procedure to aid in the conception of interface alternatives and their ranking is proposed, assisting the design team on decision-making. The procedure proposed was validated during the design of modular products for mussel farming and processing in the State of Santa Catarina. The results achieved show the potential of this design tool.

  12. Mixed mode fracture of dental interfaces

    International Nuclear Information System (INIS)

    Rahbar, Nima; Yang, Yong; Soboyejo, Winston

    2008-01-01

    This paper presents the results of a combined experimental and computational study of mixed mode fracture in glass/cement and zirconia/cement interfaces that are relevant to dental restorations. The interfacial fracture is investigated using Brazil-nut specimens. The kinking in-and-out of the interface that occurs between glass/cement and zirconia/cement interfaces, is also shown to be consistent with predictions from a microstructure-based finite element model. The predictions later verified using focused ion beam and scanning electron microscopy images

  13. 200 Area TEDF interface control document

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.J.; Hildebrand, R.A.

    1994-11-15

    Because the TEDF does not have any treatment or retention capacity, strict control at the generator interface is essential to operate the TEDF in compliance with good engineering practices, Hanford site requirements, and the 216 Discharge Permit. The information in the Interface Control Document (ICD) forms the basis of understanding between all parties involved in the TEDF; DOE, WHC, and the generating facilities. The ICD defines the controlling document hierarchy; LEF, and generator responsibilities; monitoring and sampling requirements; and specifies the TEDF/Generator Interface points.

  14. Diffuse-Interface Methods in Fluid Mechanics

    Science.gov (United States)

    Anderson, D. M.; McFadden, G. B.; Wheeler, A. A.

    1997-01-01

    The authors review the development of diffuse-interface models of hydrodynamics and their application to a wide variety of interfacial phenomena. The authors discuss the issues involved in formulating diffuse-interface models for single-component and binary fluids. Recent applications and computations using these models are discussed in each case. Further, the authors address issues including sharp-interface analyses that relate these models to the classical free-boundary problem, related computational approaches to describe interfacial phenomena, and related approaches describing fully-miscible fluids.

  15. PFP Interface identification and management planning guide

    International Nuclear Information System (INIS)

    SINCLAIR, J.C.

    1999-01-01

    The purpose of-this planning guide is to present the process used to identify, document, and control PFP Stabilization and Deactivation Project interfaces. Revisions to this document will include, as attachments, the most recent version of the Project Interface Management List. A preliminary Interface Management List is included in Appendix A. This document is intended be a Project owned management tool. As such, this document will periodically require revisions resulting from improvements of the information, processes, and techniques as now described. For most revisions that suggest improved processes, PFP management approval is all that will be required

  16. Mixed mode fracture of dental interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Rahbar, Nima [Princeton Institute for the Science and Technology of Materials (PRISM) and Civil and Environmental Engineering Department, Princeton University (United States); Yang, Yong [Princeton Institute for the Science and Technology of Materials (PRISM) and Mechanical and Aerospace Engineering Department, Princeton University (United States); Soboyejo, Winston [Princeton Institute for the Science and Technology of Materials (PRISM) and Mechanical and Aerospace Engineering Department, Princeton University (United States)], E-mail: soboyejo@princeton.edu

    2008-08-15

    This paper presents the results of a combined experimental and computational study of mixed mode fracture in glass/cement and zirconia/cement interfaces that are relevant to dental restorations. The interfacial fracture is investigated using Brazil-nut specimens. The kinking in-and-out of the interface that occurs between glass/cement and zirconia/cement interfaces, is also shown to be consistent with predictions from a microstructure-based finite element model. The predictions later verified using focused ion beam and scanning electron microscopy images.

  17. Concept of software interface for BCI systems

    Science.gov (United States)

    Svejda, Jaromir; Zak, Roman; Jasek, Roman

    2016-06-01

    Brain Computer Interface (BCI) technology is intended to control external system by brain activity. One of main part of such system is software interface, which carries about clear communication between brain and either computer or additional devices connected to computer. This paper is organized as follows. Firstly, current knowledge about human brain is briefly summarized to points out its complexity. Secondly, there is described a concept of BCI system, which is then used to build an architecture of proposed software interface. Finally, there are mentioned disadvantages of sensing technology discovered during sensing part of our research.

  18. Skin interface pressure on the NATO litter.

    Science.gov (United States)

    Bridges, Elizabeth J; Schmelz, Joseph O; Mazer, Stephen

    2003-04-01

    The NATO litter serves as a transport device and hospital bed during all types of operations. Little is known about the skin interface pressure on this litter. The purpose of this study was to determine whether various types of padding on the litter and body position affect the peak skin interface pressure and the total body area exposed to interface pressures above 30 mm Hg at different body areas. Thirty-two subjects participated. A repeated measures design was used. The surface effect was statistically significant for all peak pressure and surface area analyses (repeated-measures analysis of variance, p patients if feasible. Preventive measures (turning, elevating the heels) are still required.

  19. iPhone User Interface Cookbook

    CERN Document Server

    Banga, Cameron

    2011-01-01

    Written in a cookbook style, this book offers solutions using a recipe based approach. Each recipe contains step-by-step instructions followed by an analysis of what was done in each task and other useful information. The cookbook approach means you can dive into whatever recipes you want in no particular order. The iPhone Interface Cookbook is written from the ground up for people who are new to iOS or application interface design in general. Each chapter discusses the reasoning and design strategy behind critical interface components, as well as how to best integrate each into any iPhone or

  20. A human activity approach to User Interfaces

    DEFF Research Database (Denmark)

    Bødker, Susanne

    1989-01-01

    How can we understand why a bank teller has different needs for a user interface than those of casual users of a machine teller, or why a graphic designer needs a different user interface than a secretary? This article presents a framework for the design of user interfaces that originates from...... organized practice of the users and the material conditions for the activity, including the object of the activity). The standard view in these situations is to deduce an ultimate set of operations from an abstract use activity and apply these to design and analysis. This article argues that the user...

  1. Development of INFRA graphic user interface

    International Nuclear Information System (INIS)

    Yang, Y. S.; Lee, C. B.; Kim, Y. M.; Kim, D. H.; Kim, S. K.

    2004-01-01

    GUI(Graphic User Interface) has been developed for high burnup fuel performance code INFRA. Based upon FORTRAN program language, INFRA was developed by COMPAQ Visual FORTRAN 6.5. Graphic user input and output interface have been developed by using Visual Basic and MDB which are the most widely used program language and database for windows application development. Various input parameters, which are required for INFRA calculation, can be input more conveniently by newly developed input interface. Without any additional data handling, INFRA calculation results can be investigated intuitively by 2D or 3D graphs on screen and animation function

  2. Nanopore-CMOS Interfaces for DNA Sequencing.

    Science.gov (United States)

    Magierowski, Sebastian; Huang, Yiyun; Wang, Chengjie; Ghafar-Zadeh, Ebrahim

    2016-08-06

    DNA sequencers based on nanopore sensors present an opportunity for a significant break from the template-based incumbents of the last forty years. Key advantages ushered by nanopore technology include a simplified chemistry and the ability to interface to CMOS technology. The latter opportunity offers substantial promise for improvement in sequencing speed, size and cost. This paper reviews existing and emerging means of interfacing nanopores to CMOS technology with an emphasis on massively-arrayed structures. It presents this in the context of incumbent DNA sequencing techniques, reviews and quantifies nanopore characteristics and models and presents CMOS circuit methods for the amplification of low-current nanopore signals in such interfaces.

  3. Micro- and Nanotechnologies for Optical Neural Interfaces

    Science.gov (United States)

    Pisanello, Ferruccio; Sileo, Leonardo; De Vittorio, Massimo

    2016-01-01

    In last decade, the possibility to optically interface with the mammalian brain in vivo has allowed unprecedented investigation of functional connectivity of neural circuitry. Together with new genetic and molecular techniques to optically trigger and monitor neural activity, a new generation of optical neural interfaces is being developed, mainly thanks to the exploitation of both bottom-up and top-down nanofabrication approaches. This review highlights the role of nanotechnologies for optical neural interfaces, with particular emphasis on new devices and methodologies for optogenetic control of neural activity and unconventional methods for detection and triggering of action potentials using optically-active colloidal nanoparticles. PMID:27013939

  4. LTE-advanced air interface technology

    CERN Document Server

    Zhang, Xincheng

    2012-01-01

    Opportunities are at hand for professionals eager to learn and apply the latest theories and practices in air interface technologies. Written by experienced researchers and professionals, LTE-Advanced Air Interface Technology thoroughly covers the performance targets and technology components studied by 3GPP for LTE-Advanced. Besides being an explanatory text about LTE-Advanced air interface technology, this book exploits the technical details in the 3GPP specification, and explains the motivation and implication behind the specifications.After a general description of wireless cellular techno

  5. Quantitative interface models for simulating microstructure evolution

    International Nuclear Information System (INIS)

    Zhu, J.Z.; Wang, T.; Zhou, S.H.; Liu, Z.K.; Chen, L.Q.

    2004-01-01

    To quantitatively simulate microstructural evolution in real systems, we investigated three different interface models: a sharp-interface model implemented by the software DICTRA and two diffuse-interface models which use either physical order parameters or artificial order parameters. A particular example is considered, the diffusion-controlled growth of a γ ' precipitate in a supersaturated γ matrix in Ni-Al binary alloys. All three models use the thermodynamic and kinetic parameters from the same databases. The temporal evolution profiles of composition from different models are shown to agree with each other. The focus is on examining the advantages and disadvantages of each model as applied to microstructure evolution in alloys

  6. Metastable He deexcitation at semiconductor interfaces

    International Nuclear Information System (INIS)

    Pasquali, L.; Nannarone, S.

    2005-01-01

    A review is given of the application of metastable deexcitation spectroscopy (MDS) to the study of the interface formation between semiconductors and different materials. In particular we present an overview of the results obtained on nanostructured interfaces, where strain and reaction between the substrate and the overlayer atoms drive the growth mode and the morphology of the system. As prototypical examples we discuss the growth of CaF 2 on silicon and rare earths (Yb, Er) on silicon and gallium arsenide. The mechanisms and chemical reactions which bring to interface formation are examined on the basis of MDS results and their comparison with photoemission

  7. The CERES / NA45 experiment

    CERN Multimedia

    Laurent Guiraud

    2000-01-01

    Ceres is one of the second generation heavy ion experiments at CERN's SPS. It is dedicated to the study of electron-positron pairs in relativistic nuclear collisions. NA45 is one of the seven experiments (NA44, NA45, NA49, NA50, NA52, WA97/NA57 and WA98) involved in CERN's Heavy Ion programme which provided evidence for the existence of a new state of matter, the quark-gluon plasma. In this state, quarks, instead of being bound up into more complex particles such as protons and neutrons, are liberated and roam freely. Theory predicts that this state must have existed at about 10 microseconds after the Big Bang, before the formation of matter as we know it today.

  8. Atmospheric photochemistry at a fatty acid coated air/water interface

    Science.gov (United States)

    George, Christian; Rossignol, Stéphanie; Passananti, Monica; Tinel, Liselotte; Perrier, Sebastien; Kong, Lingdong; Brigante, Marcello; Bianco, Angelica; Chen, Jianmin; Donaldson, James

    2017-04-01

    Over the past 20 years, interfacial processes have become increasingly of interest in the field of atmospheric chemistry, with many studies showing that environmental surfaces display specific chemistry and photochemistry, enhancing certain reactions and acting as reactive sinks or sources for various atmospherically relevant species. Many molecules display a free energy minimum at the air-water interface, making it a favored venue for compound accumulation and reaction. Indeed, surface active molecules have been shown to undergo specific photochemistry at the air-water interface. This presentation will address some recent surprises. Indeed, while fatty acids are believed to be photochemically inert in the actinic region, complex volatile organic compounds (VOCs) are produced during illumination of an air-water interface coated solely with a monolayer of carboxylic acid. When aqueous solutions containing nonanoic acid (NA) at bulk concentrations that give rise to just over monolayer NA coverage are illuminated with actinic radiation, saturated and unsaturated aldehydes are seen in the gas phase and more highly oxygenated products appear in the aqueous phase. This chemistry is probably initiated by triplet state NA molecules excited by direct absorption of actinic light at the water surface. As fatty acids covered interfaces are ubiquitous in the environment, such photochemical processing will have a significant impact on local ozone and particle formation. In addition, it was shown recently that a heterogeneous reaction between SO2 and oleic acid (OA; an unsaturated fatty acid) takes place and leads efficiently to the formation of organosulfur products. Here, we demonstrate that this reaction proceeds photochemically on various unsaturated fatty acids compounds, and may therefore have a general environmental impact. This is probably due to the chromophoric nature of the SO2 adduct with C=C bonds, and means that the contribution of this direct addition of SO2 could

  9. na Perua

    Directory of Open Access Journals (Sweden)

    Jorge Carvalho

    1989-01-01

    Full Text Available Antes de se caracterizar como tentativa de ensaio ou de análise a qualquer coisa, o presente artigo tem, antes de mais nada, a pretensão de se constituir uma provocação ao debate acerca da questão do esporte na escola. A provocação parte basicamente do relato da minha experiência pessoal como Secretário da Educação do Município de Aracaju, cargo que exerci no período de 1º de janeiro de 1986 a 27 de janeiro de 1987.

  10. Envolvimento pulmonar na polimiosite

    Directory of Open Access Journals (Sweden)

    Direndra Hasmucrai

    2010-07-01

    Full Text Available Resumo: Introdução: A polimiosite (PM e a dermatomiosite são classificadas como miopatias inflamatórias idiopáticas. O envolvimento pulmonar por PM é pouco frequente, estando descrito na literatura em cerca de 10% de casos.Os autores apresentam um caso de uma mulher de 75 anos, com queixas de febre, perda ponderal, artralgias, mialgias e diminuição simétrica e proximal da força muscular com impotência funcional dos membros superiores e inferiores, com início um mês antes do internamento. Apresentava infiltrados pulmonares na telerradiografia de tórax. Após estudo exaustivo estabeleceu-se o diagnóstico de envolvimento pulmonar na forma de pneumonia organizativa por PM. Efectuou-se corticoterapia e terapêutica com micofenolato com melhoria clínica, analítica e radiológica.Conclusão: Neste caso, foi a alteração na telerradiografia de tórax numa doente sem sintomatologia respiratória que levou ao estudo exaustivo até ao diagnóstico de PM, realçando mais uma vez a importância da telerradiografia no rastreio de patologias de outros foros.Rev Port Pneumol 2010; XVI (4: 671-677 Abstract: Introduction: Polymyositis and dermatomyositis are classified as idiopathic inflammatory myopathies. Interstitial lung disease is rare and is described in the literature in about 10% of cases.The authors describes a case of 75 year old woman presenting with one month evolution of fever, weight loss, arthralgia, myalgia and symmetric and proximal muscle weakness of upper and lower limbs. Nonspecific interstitial changes was found in chest X-ray. After exhaustive study, the diagnosis of pulmonary envolvement in the form of organizing pneumonia by polymyositis, was established. Glucocorticoids and mycophenolate were prescribed with good clinical, analytical and radiological outcome.Conclusion: In this case, it was the changes in the chest X-ray in a patient without respiratory sym ptomatology, that conducted to exhaustive study to polymyositis

  11. Envolvimento pulmonar na polimiosite

    Directory of Open Access Journals (Sweden)

    Direndra Hasmucrai

    2010-07-01

    Full Text Available Resumo: Introdução: A polimiosite (PM e a dermatomiosite são classificadas como miopatias inflamatórias idiopáticas. O envolvimento pulmonar por PM é pouco frequente, estando descrito na literatura em cerca de 10% de casos.Os autores apresentam um caso de uma mulher de 75 anos, com queixas de febre, perda ponderal, artralgias, mialgias e diminuição simétrica e proximal da força muscular com impotência funcional dos membros superiores e inferiores, com início um mês antes do internamento. Apresentava infiltrados pulmonares na telerradiografia de tórax. Após estudo exaustivo estabeleceu-se o diagnóstico de envolvimento pulmonar na forma de pneumonia organizativa por PM. Efectuou-se corticoterapia e terapêutica com micofenolato com melhoria clínica, analítica e radiológica. Conclusão: Neste caso, foi a alteração na telerradiografia de tórax numa doente sem sintomatologia respiratória que levou ao estudo exaustivo até ao diagnóstico de PM, realçando mais uma vez a importância da telerradiografia no rastreio de patologias de outros foros. Abstract: Introduction: Polymyositis and dermatomyositis are classified as idiopathic inflammatory myopathies. Interstitial lung disease is rare and is described in the literature in about 10% of cases.The authors describes a case of 75 year old woman presenting with one month evolution of fever, weight loss, arthralgia, myalgia and symmetric and proximal muscle weakness of upper and lower limbs. Nonspecific interstitial changes was found in chest X-ray. After exhaustive study, the diagnosis of pulmonary envolvement in the form of organizing pneumonia by polymyositis, was established. Glucocorticoids and mycophenolate were prescribed with good clinical, analytical and radiological outcome. Conclusion: In this case, it was the changes in the chest X-ray in a patient without respiratory symptomatology, that conducted to exhaustive study to polymyositis diagnosis, enhancing once again the

  12. O objetivo de leitura em uma interface psicolinguística-pragmática Reading purpose in a psycholinguistics-pragmatics interface

    Directory of Open Access Journals (Sweden)

    Cláudia Strey

    2012-06-01

    Full Text Available O seguinte artigo objetiva demonstrar a construção de uma possível interface interna entre Psicolinguística e Pragmática a fim de explicar o processo inferencial durante leitura. Para tal, constrói-se uma hipótese de trabalho a partir da observação da realidade: por que os estudantes parecem preferir ler resumos a obras originais? Argumenta-se que essa escolha se dá pelo menor custo cognitivo e não pelo maior benefício, o que vai de encontro ao Princípio Cognitivo proposto pela Teoria da Relevância (SPERBER & WILSON, 1995. Além disso, o objetivo de leitura e o tipo de avaliação feita parecem interferir na escolha do que é mais relevante (em termos de custo-benefício. Por fim, mostra-se que a interface feita é uma interessante perspectiva teórica para explicar os processos inferenciais envolvidos na leitura.The following article aims to demonstrate a possible construction of an interface between Psycholinguistics and Pragmatics in order to explain the inferential process in reading. For this purpose, the object of study arises from the observation of reality: high-school students seem to prefer reading summaries than reading the original literary text. We argue that this choice is lead by lower cost and not greatest cognitive benefit, which goes against the Cognitive Principle proposed by Relevance Theory (SPERBER & WILSON, 1995. Furthermore, the purpose of reading and the type of evaluation might influence the choice of what is more relevant (in terms of effort-benefit. Finally, we show that this interface is an interesting theoretical perspective to explain the inferential processes in reading.

  13. TMACS Test Procedure TP011: Panalarm Interface

    International Nuclear Information System (INIS)

    Seghers, R.; Washburn, S.J.

    1994-01-01

    The TMACS Software Test Procedures translate the project's acceptance criteria into test steps. The TMACS Test Plan (WHC-SD-WM-TP-148) is fulfilled when all Test Cases are approved. This Test Procedure tests the TMACS Panalarm Interface functions

  14. Navigation with a passive brain based interface

    NARCIS (Netherlands)

    Erp, J.B.F. van; Werkhoven, P.J.; Thurlings, M.E.; Brouwer, A.-M.

    2009-01-01

    In this paper, we describe a Brain Computer Interface (BCI) for navigation. The system is based on detecting brain signals that are elicited by tactile stimulation on the torso indicating the desired direction.

  15. Legal Aspects of Brain-Computer Interfaces

    Czech Academy of Sciences Publication Activity Database

    Krausová, Alžběta

    2014-01-01

    Roč. 8, č. 2 (2014) ISSN 1802-5951 Institutional support: RVO:68378122 Keywords : brain-computer interface * human rights * right to privacy, Subject RIV: AG - Legal Sciences http://mujlt.law.muni.cz/index.php

  16. Human-machine Interface for Presentation Robot

    Czech Academy of Sciences Publication Activity Database

    Krejsa, Jiří; Ondroušek, V.

    2012-01-01

    Roč. 6, č. 2 (2012), s. 17-21 ISSN 1897-8649 Institutional research plan: CEZ:AV0Z20760514 Keywords : human- robot interface * mobile robot * presentation robot Subject RIV: JD - Computer Applications, Robot ics

  17. Haptic interface for vehicular touch screens.

    Science.gov (United States)

    2013-02-01

    Once the domain of purely physical controls such as knobs, : levers, buttons, and sliders, the vehicle dash is rapidly : transforming into a computer interface. This presents a : challenge for drivers, because the physics-based cues which : make trad...

  18. Proton storage ring: man/machine interface

    International Nuclear Information System (INIS)

    Lander, R.F.; Clout, P.N.

    1985-01-01

    The human interface of the Proton Storage Ring Control System at Los Alamos is described in some detail, together with the software environment in which operator interaction programs are written. Some examples of operator interaction programs are given

  19. Synchronization Interfaces for Improving Moodle Utilization

    Directory of Open Access Journals (Sweden)

    GM Arya Sasmita

    2012-03-01

    Full Text Available Many universities have applied e-learning on more than one LMS (Learning Management System platforms such as Wordpress and Moodle. In addition, difficulties implementations in developing countries have occurred. Those are mainly caused by limitations and expensive of Internet infrastructure. Therefore to increase Moodle application as an e-learning system, the paper proposed two synchronization interfaces. The first interface is for Moodle and Wordpress. This assists teachers to migrate their learning material in their blog in Wordpress into Moodle. Second interface is for Moodle portable performing offline LMS and Moodle performing online LMS. Moodle portable was installed in teachers and students notebooks. Moodle itself was installed and run in e-learning server. The aim is to improve Moodle utilization in the class. The results showed satisfied outcomes. Students and teachers could employ the interfaces easily and secure as they have to login using student/teacher ID, course ID, username and password.

  20. Advanced Display Interface Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — CMC proposes, along with our collaborator, Dr. Mica Endlsey of SA Technologies, to produce a framework from which an Adaptive User Interface (AUI) can be modeled and...

  1. Inflatable Module Seal Interface Development and Testing

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop a repeatable low permeable sealing interface evaluating O-ring, RTV bond and flowed RTV bond methods. Advanced Bladder materials (ArmorFlex, Nanoclay, etc)...

  2. Applying Cognitive Psychology to User Interfaces

    Science.gov (United States)

    Durrani, Sabeen; Durrani, Qaiser S.

    This paper explores some key aspects of cognitive psychology that may be mapped onto user interfaces. Major focus in existing user interface guidelines is on consistency, simplicity, feedback, system messages, display issues, navigation, colors, graphics, visibility and error prevention [8-10]. These guidelines are effective indesigning user interfaces. However, these guidelines do not handle the issues that may arise due to the innate structure of human brain and human limitations. For example, where to place graphics on the screen so that user can easily process them and what kind of background should be given on the screen according to the limitation of human motor system. In this paper we have collected some available guidelines from the area of cognitive psychology [1, 5, 7]. In addition, we have extracted few guidelines from theories and studies of cognitive psychology [3, 11] which may be mapped to user interfaces.

  3. Defining Interactions and Interfaces in Engineering Design

    DEFF Research Database (Denmark)

    Parslov, Jakob Filippson

    ’ across any engineering discipline for describing and communicating about interactions and interfaces in engineering design. The framework contains classifications of three key terms; interaction, interaction mechanism, and interface. Due to the first principles, physics-­based approach to deriving......This PhD thesis focuses on the understanding and definition of interactions and interfaces during the architectural decomposition of complex, multi-technological products. The Interaction and Interface Framework developed in this PhD project contribute to the field of engineering design research....... Developing complex, multi-technological products involves the joint effort of multiple engineering disciplines in order to arrive at an end product, which satisfies its requirements. A major challenge is however the fact that bringing together engineers from different technical backgrounds means...

  4. Biological growth in bodies with incoherent interfaces

    Science.gov (United States)

    Swain, Digendranath; Gupta, Anurag

    2018-01-01

    A general theory of thermodynamically consistent biomechanical-biochemical growth in a body, considering mass addition in the bulk and at an incoherent interface, is developed. The incoherency arises due to incompatibility of growth and elastic distortion tensors at the interface. The incoherent interface therefore acts as an additional source of internal stress besides allowing for rich growth kinematics. All the biochemicals in the model are essentially represented in terms of nutrient concentration fields, in the bulk and at the interface. A nutrient balance law is postulated which, combined with mechanical balances and kinetic laws, yields an initial-boundary-value problem coupling the evolution of bulk and interfacial growth, on the one hand, and the evolution of growth and nutrient concentration on the other. The problem is solved, and discussed in detail, for two distinct examples: annual ring formation during tree growth and healing of cutaneous wounds in animals.

  5. On persistence interfaces for scientific data stores

    International Nuclear Information System (INIS)

    Malon, D.M.; May, E.N.

    1996-01-01

    A common dilemma among builders of large scientific data stores is whether to use a lightweight object persistence manager or a genuine object-oriented database. There are often good reasons to consider each of these strategies; a few are described in this paper. Too often, however, electing to use a lightweight approach has meant programming to an interface that is entirely different than that expected by commercial object-oriented databases. With the emergence of object database standards, it is possible to provide an interface to persistence managers that does not needlessly inhibit coexistence with (and, perhaps, eventual migration to) object-oriented databases. This paper describes an implementation of a substantial subset of the ODMG-93[1]C++ specification that allows clients to use many of today's lightweight object persistence managers through an interface that conforms to the ODMG standard. We also describe a minimal interface that persistence software should support in order to provide persistence services for ODMG implementations

  6. Mode III effects on interface delamination

    DEFF Research Database (Denmark)

    Tvergaard, Viggo; Hutchinson, J.W.

    2008-01-01

    For crack growth along an interface between dissimilar materials the effect of combined modes I, II and III at the crack-tip is investigated. First, in order to highlight situations where crack growth is affected by a mode III contribution, examples of material configurations are discussed where...... mode III has an effect. Subsequently, the focus is on crack growth along an interface between an elastic-plastic solid and an elastic substrate. The analyses are carried out for conditions of small-scale yielding, with the fracture process at the interface represented by a cohesive zone model. Due...... to the mismatch of elastic properties across the interface the corresponding elastic solution has an oscillating stress singularity, and this solution is applied as boundary conditions on the outer edge of the region analyzed. For several combinations of modes I, II and III crack growth resistance curves...

  7. Colloid and interface chemistry for nanotechnology

    CERN Document Server

    Kralchevsky, Peter; Ravera, Francesca

    2016-01-01

    Colloid and interface science dealt with nanoscale objects for nearly a century before the term nanotechnology was coined. An interdisciplinary field, it bridges the macroscopic world and the small world of atoms and molecules. Colloid and Interface Chemistry for Nanotechnology is a collection of manuscripts reflecting the activities of research teams that have been involved in the networking project Colloid and Interface Chemistry for Nanotechnology (2006-2011), Action D43, the European Science Foundation. The project was a part of the intergovernmental framework for Cooperation in Science and Technology (COST), allowing the coordination of nationally funded research across Europe. With contributions by leading experts, this book covers a wide range of topics. Chapters are grouped into three sections: "Nanoparticle Synthesis and Characterization," "New Experimental Tools and Interpretation," and "Nanocolloidal Dispersions and Interfaces." The topics covered belong to six basic research areas: (1) The synthes...

  8. High Performance Human-Computer Interfaces

    National Research Council Canada - National Science Library

    Despain, a

    1997-01-01

    Human interfaces to the computer have remained fairly crude since the use of teletypes despite the fact that computer, storage and communication performance have continued to improve by many orders of magnitude...

  9. Solid Surfaces, Interfaces and Thin Films

    CERN Document Server

    Lüth, Hans

    2010-01-01

    This book emphasises both experimental and theoretical aspects of surface, interface and thin film physics. As in previous editions the preparation of surfaces and thin films, their atomic and morphological, their vibronic and electronic properties as well as fundamentals of adsorption are treated. Because of their importance in modern information technology and nanostructure physics particular emphasis is paid to electronic surface and interface states, semiconductor space charge layers and heterostructures as well as to superconductor/semiconductor interfaces and magnetic thin films. The latter topic was significantly extended in this new edition by more details about the giant magnetoresistance and a section about the spin-transfer torque mechanism including one new problem as exercise. Two new panels about Kerr-effect and spin-polarized scanning tunnelling microscopy were added, too. Furthermore, the meanwhile important group III-nitride surfaces and high-k oxide/semiconductor interfaces are shortly discu...

  10. Soft particles at a fluid interface

    Science.gov (United States)

    Mehrabian, Hadi; Harting, Jens; Snoeijer, Jacco H.

    2015-11-01

    Particles added to a fluid interface can be used as a surface stabilizer in the food, oil and cosmetic industries. As an alternative to rigid particles, it is promising to consider highly deformable particles that can adapt their conformation at the interface. In this study, we compute the shapes of soft elastic particles using molecular dynamics simulations of a cross-linked polymer gel, complemented by continuum calculations based on the linear elasticity. It is shown that the particle shape is not only affected by the Young's modulus of the particle, but also strongly depends on whether the gel is partially or completely wetting the fluid interface. We find that the molecular simulations for the partially wetting case are very accurately described by the continuum theory. By contrast, when the gel is completely wetting the fluid interface the linear theory breaks down and we reveal that molecular details have a strong influence on the equilibrium shape.

  11. Interface magnetism of 3d transition metals

    DEFF Research Database (Denmark)

    Niklasson, A. M. N.; Johansson, B.; Skriver, Hans Lomholt

    1999-01-01

    The layered resolved magnetic spin moments of the magnetic 3d bilayer interfaces Fe/V bcc, Fe/Co bcc, Fe/Cu bcc, Co/V bcc, Co/Ni fee, Co/Cu fee, Ni/V fee, Ni/Cr fcc, Ni/Cu fee and the magnetic surfaces Fe bcc, Co bcc, Co fee, and Ni fee are calculated for the (001), (011), and (111) orientations...... by means of a first-principles Green's function method. It is shown how the magnetic profiles around the bilayer interfaces and surfaces directly can be used to predict the magnetization of more complex systems such as magnetic multilayers and clusters. Furthermore, it is shown how the magnetic interface...... moments can be estimated from data of the corresponding binary bulk alloys. The behavior of interface magnetism can thus be traced back to the understanding of magnetism in bulk alloys. [:S0163-1829(99)04005-9]....

  12. New ROOT Graphical User Interfaces for fitting

    International Nuclear Information System (INIS)

    Maline, D Gonzalez; Moneta, L; Antcheva, I

    2010-01-01

    ROOT, as a scientific data analysis framework, provides extensive capabilities via Graphical User Interfaces (GUI) for performing interactive analysis and visualizing data objects like histograms and graphs. A new interface for fitting has been developed for performing, exploring and comparing fits on data point sets such as histograms, multi-dimensional graphs or trees. With this new interface, users can build interactively the fit model function, set parameter values and constraints and select fit and minimization methods with their options. Functionality for visualizing the fit results is as well provided, with the possibility of drawing residuals or confidence intervals. Furthermore, the new fit panel reacts as a standalone application and it does not prevent users from interacting with other windows. We will describe in great detail the functionality of this user interface, covering as well new capabilities provided by the new fitting and minimization tools introduced recently in the ROOT framework.

  13. Interface stress in Au/Ni multilayers

    DEFF Research Database (Denmark)

    Schweitz, K.O.; Böttiger, J.; Chevallier, J.

    2000-01-01

    The effect of intermixing on the apparent interface stress is studied in -textured dc-magnetron sputtered Au/Ni multilayers by use of two methods commonly used for determining interface stress. The method using profilometry and in-plane x-ray diffraction does not take intermixing...... into account and yields an apparent interface stress of -8.46 +/- 0.99 J m(-2). However, observed discrepancies between model calculations and measured high-angle x-ray diffractograms indicate intermixing, and by use of the profilometry and sin(2) psi method the real interface stress value of -2.69 +/- 0.43 J...... m(-2) is found. This method also reveals a significant and systematic change of the stress-free lattice parameter of both constituents as a function of modulation period which is shown to account for the difference between the two findings. The method using in-plane diffraction is thus shown...

  14. TMS communications software. Volume 1: Computer interfaces

    Science.gov (United States)

    Brown, J. S.; Lenker, M. D.

    1979-01-01

    A prototype bus communications system, which is being used to support the Trend Monitoring System (TMS) as well as for evaluation of the bus concept is considered. Hardware and software interfaces to the MODCOMP and NOVA minicomputers are included. The system software required to drive the interfaces in each TMS computer is described. Documentation of other software for bus statistics monitoring and for transferring files across the bus is also included.

  15. Distributed user interfaces usability and collaboration

    CERN Document Server

    Lozano, María D; Tesoriero, Ricardo; Penichet, Victor MR

    2013-01-01

    Written by international researchers in the field of Distributed User Interfaces (DUIs), this book brings together important contributions regarding collaboration and usability in Distributed User Interface settings. Throughout the thirteen chapters authors address key questions concerning how collaboration can be improved by using DUIs, including: in which situations a DUI is suitable to ease the collaboration among users; how usability standards can be used to evaluate the usability of systems based on DUIs; and accurately describe case studies and prototypes implementing these concerns

  16. Designing Gestural Interfaces Touchscreens and Interactive Devices

    CERN Document Server

    Saffer, Dan

    2008-01-01

    If you want to get started in new era of interaction design, this is the reference you need. Packed with informative illustrations and photos, Designing Gestural Interfaces provides you with essential information about kinesiology, sensors, ergonomics, physical computing, touchscreen technology, and new interface patterns -- information you need to augment your existing skills in traditional" websites, software, or product development. This book will help you enter this new world of possibilities."

  17. Multifunctional Magnetic Nanowires for Biomagnetic Interfacing Concepts

    Science.gov (United States)

    2006-07-14

    1 Final Performance Report Multifunctional Magnetic Nanowires for Biomagnetic Interfacing Concepts AFOSR Agreement Number F49620-02-1-0307 July 14...AND DATES COVERED Final report covering 06/15/02 –12/15/05 4. TITLE AND SUBTITLE Multifunctional Magnetic Nanowires for Biomagnetic Interfacing...nanowires for biomagnetic applications. These include (i) tuning of magnetic and other physical properties of nanowires, (ii) selective

  18. Embedded silicon nanocrystal interface structure and strain

    Science.gov (United States)

    Shenoy, Bhamy Maithry; Hegde, G. M.; Mahapatra, D. Roy

    2018-01-01

    The structure of nanocrystal-matrix interface and strain in embedded nanocrystals are studied using large-scale atomistic simulations, with the examples of Si nanocrystal embedded in amorphous matrix of SiO2. Photoluminescence from silicon nanocrystals embedded in a dielectric matrix like SiO2 and Si3N4 are promising for Si-based optical devices. The nanocrystal-matrix interface plays a crucial role in understanding its optical and electrical properties. Nanocrystals with diameters varying from 2.17 to 4.56 nm are studied. A detailed quantitative analysis of the variation of Si/SiO2 interface structure and strain distribution with nanocrystal diameter is reported. A linear variation of the interface width with nanocrystal diameter is observed with thinner interfaces for larger nanocrystals. Local deformation analysis reveals that the smaller nanocrystals are highly strained, whereas the strain in the larger ones shifts to the interface. This is in accordance with observed increase in total percentage of defect states in the interface from 39 to 70 % for diameter increasing from 2.17 to 4.56 nm. Moreover, based on the atomic arrangements at the interface, optically active defects like Pb centres, E centres and non-bridging oxygen centres are identified and a dominance of Pb centres is observed for all the nanocrystals. The detailed structural characterization-related investigations using the proposed simulation approach will find useful application in designing system-level response of embedded nanocrystals and also to correlate various experimental observations.

  19. Optimal Achievable Encoding for Brain Machine Interface

    Science.gov (United States)

    2017-12-22

    AFRL-RH-WP-TP-2017-0001 Optimal Achievable Encoding for Brain- Machine Interface Eduardo Chichilnisky Leland Stanford Junior...Oct 2016 – 30 Sep 2017 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Optimal Achievable Encoding for Brain- Machine Interface 5b...required. First, we developed novel models of retinal encoding that improve upon the state of the art, by using machine learning methods to

  20. Building a dynamic Web/database interface

    OpenAIRE

    Cornell, Julie.

    1996-01-01

    Computer Science This thesis examines methods for accessing information stored in a relational database from a Web Page. The stateless and connectionless nature of the Web's Hypertext Transport Protocol as well as the open nature of the Internet Protocol pose problems in the areas of database concurrency, security, speed, and performance. We examined the Common Gateway Interface, Server API, Oracle's Web/database architecture, and the Java Database Connectivity interface in terms of p...

  1. Heat-Exchanger/Heat-Pipe Interface

    Science.gov (United States)

    Snyder, H. J.; Van Hagan, T. H.

    1987-01-01

    Monolithic assembly reliable and light in weight. Heat exchanger and evaporator ends of heat pipes integrated in monolithic halves welded together. Interface assembly connects heat exchanger of furnace, reactor, or other power source with heat pipes carrying heat to radiator or power-consuming system. One of several concepts proposed for nuclear power supplies aboard spacecraft, interface useful on Earth in solar thermal power systems, heat engines, and lightweight cooling systems.

  2. Interface Between Macro and Nano Worlds

    Directory of Open Access Journals (Sweden)

    Simon Zapusek

    2010-09-01

    Full Text Available This paper describes the design of a nanorobotic application which includes: nanorobotic arm, Akiyama sensor system, a vacuum chamber, and an interface tools for the nanorobotic hardware developed using C++ and VRML languages in order to create a desktop virtual-reality environment which improves visualisation and prevents collision of the nanomanipulator hardware with the associated workspace. The presented experiment shows how the used man-machine interface could be used for communication between macro and micro/nano worlds.

  3. Mobile Phone User Interfaces in Multiplayer Games

    OpenAIRE

    NURMINEN, MINNA

    2007-01-01

    This study focuses on the user interface elements of mobile phones and their qualities in multiplayer games. Mobile phone is not intended as a gaming device. Therefore its technology has many shortcomings when it comes to playing mobile games on the device. One of those is the non-standardized user interface design. However, it has also some strengths, such as the portability and networked nature. In addition, many mobile phone models today have a camera, a feature only few gaming devices hav...

  4. Bitbus data transport by galvanic interface

    International Nuclear Information System (INIS)

    Jansweijer, P.P.M; Hogenbirk, J.J.

    1988-01-01

    For a bitbus system in a raw environment galvanic interfaces are necessary. This report offers various possibilities for implementing such an galvanic interface. One of the possibilities is described in detail. Along the objects to be controlled an apart ringline runs in behalf of the bitbus. The various bitbus components which have been mounted near these objects, are coupled to this ringline via opto-couplers. (author). 6 refs.; 9 figs

  5. Interfaces do corpo: integração da alteridade no conceito de doença Body interfaces: the integration of alterity into the concept of disease

    Directory of Open Access Journals (Sweden)

    Dina Czeresnia

    2007-03-01

    Full Text Available A cultura ocidental fragmentou o corpo em redutoras perspectivas teóricas que fizeram aparecer diferentes ordens de realidade: biológica, psíquica e social. Este artigo identifica o limite da biomedicina em integrar a alteridade no conceito de doença, como uma das lacunas importantes para a aproximação entre os conceitos de psiquismo e corpo biológico. Apresenta a proposição de que as interfaces do corpo são centrais para a compreensão da constituição do corpo biológico em seus processos de individuação. Levanta a possibilidade de ocorrer uma transformação epistemológica na medicina, a partir da valorização dos estudos sobre fenômenos biológicos que ocorrem nestas interfaces. Ressalta, mediante análise da literatura médica recente, indícios de uma possível integração da alteridade no conceito de doença. Esta análise se detém na crescente elaboração de um discurso sobre a relação com os microorganismos e sua importância na constituição ontogênica do organismo humano e, por conseqüência, na etiologia das doenças.Western culture has fragmented the body into a restrictive theoretical perspective that gave rise to different reality orders: biological, psychic and social. This article identifies the limits of biomedicine for integrating alterity into the concept of disease, as one of the relevant gaps for the approximation between the concepts of psyche and the biological body. It presents the proposition that the body interfaces are crucial for the understanding of the constitution of the biological body in individuation processes. It raises the possibility that there may be an epistemological transformation in medicine, based on the value that studies place on the biological phenomena that take place in these interfaces. It emphasizes, upon the analysis of recent medical literature, indications of a possible integration of alterity into the concept of disease. This analysis delves into the growing design of

  6. Interfaces naturais e o reconhecimento das línguas de sinais

    Directory of Open Access Journals (Sweden)

    Renato Kimura da Silva

    2017-01-01

    Full Text Available Interface é uma camada intermediária que está entre duas faces. No contexto computacional, podemos dizer que interface existe na intermediação interativa entre dois sujeitos, ou ainda entre sujeito e um programa. Ao longo dos anos, as interfaces têm evoluído constantemente: das linhas de texto monocromáticas aos mouses - com o conceito exploratório da interface gráfica - até as mais recentes interfaces naturais - ubíquas e que objetivam a transparência da interação. Nas novas interfaces, por meio do uso do corpo, o usuário interage com o computador, não sendo necessário aprender a interface. Seu uso é mais intuitivo, com a possibilidade de reconhecimento da voz, da face e dos gestos. O avanço tecnológico vai ao encontro das necessidades básicas do indivíduo, como a comunicação, tornando-se factível conceber novas tecnologias que beneficiam pessoas em diferentes esferas. A contribuição desse trabalho está em entender o cenário técnico que possibilita idealizar e criar interfaces naturais para o reconhecimento automático computacional dos sinais das Línguas de Sinais e considerável parte de sua gramática. Para tanto, essa pesquisa foi primeiramente pautada no estudo do desenvolvimento das interfaces computacionais e da sua estreita relação com os videogames, fundamentando-se nas contribuições de autores como Pierre Lévy, Sherry Turkle, Janet Murray e Louise Poissant. Em momento posterior, aproximamo-nos de autores como William Stokoe, Scott Liddell, Ray Birdwhistell, Lúcia Santaella e Winfried Nõth, a respeito de temas gerais e específicos que abarcam a multidisciplinaridade das Línguas de Sinais, suas gramáticas e aspectos semióticos. Por fim, foi realizado um levantamento do Estado da Arte das Interfaces Naturais voltadas ao Reconhecimento Automático das Línguas de Sinais, além do estudo de pesquisas notáveis relacionadas ao tema, apresentando possíveis caminhos futuros a serem trilhados por

  7. The net charge at interfaces between insulators

    International Nuclear Information System (INIS)

    Bristowe, N C; Littlewood, P B; Artacho, Emilio

    2011-01-01

    The issue of the net charge at insulating oxide interfaces is briefly reviewed with the ambition of dispelling myths of such charges being affected by covalency and related charge density effects. For electrostatic analysis purposes, the net charge at such interfaces is defined by the counting of discrete electrons and core ion charges, and by the definition of the reference polarization of the separate, unperturbed bulk materials. The arguments are illustrated for the case of a thin film of LaAlO 3 over SrTiO 3 in the absence of free carriers, for which the net charge is exactly 0.5e per interface formula unit, if the polarization response in both materials is referred to zero bulk values. Further consequences of the argument are extracted for structural and chemical alterations of such interfaces, in which internal rearrangements are distinguished from extrinsic alterations (changes of stoichiometry, redox processes), only the latter affecting the interfacial net charge. The arguments are reviewed alongside the proposal of Stengel and Vanderbilt (2009 Phys. Rev. B 80 241103) of using formal polarization values instead of net interfacial charges, based on the interface theorem of Vanderbilt and King-Smith (1993 Phys. Rev. B 48 4442-55). Implications for non-centrosymmetric materials are discussed, as well as for interfaces for which the charge mismatch is an integer number of polarization quanta. (viewpoint)

  8. Hard-Soft Tissue Interface Engineering.

    Science.gov (United States)

    Armitage, Oliver E; Oyen, Michelle L

    2015-01-01

    The musculoskeletal system is comprised of three distinct tissue categories: structural mineralized tissues, actuating muscular soft tissues, and connective tissues. Where connective tissues - ligament, tendon and cartilage - meet with bones, a graded interface in mechanical properties occurs that allows the transmission of load without creating stress concentrations that would cause tissue damage. This interface typically occurs over less than 1 mm and contains a three order of magnitude difference in elastic stiffness, in addition to changes in cell type and growth factor concentrations among others. Like all engineered tissues, the replication of these interfaces requires the production of scaffolds that will provide chemical and mechanical cues, resulting in biologically accurate cellular differentiation. For interface tissues however, the scaffold must provide spatially graded chemical and mechanical cues over sub millimetre length scales. Naturally, this complicates the manufacture of the scaffolds and every stage of their subsequent cell seeding and growth, as each region has different optimal conditions. Given the higher degree of difficulty associated with replicating interface tissues compared to surrounding homogeneous tissues, it is likely that the development of complex musculoskeletal tissue systems will continue to be limited by the engineering of connective tissues interfaces with bone.

  9. The net charge at interfaces between insulators

    Energy Technology Data Exchange (ETDEWEB)

    Bristowe, N C; Littlewood, P B [Theory of Condensed Matter Group, Cavendish Laboratory, University of Cambridge, J J Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Artacho, Emilio, E-mail: ncb30@cam.ac.uk [Department of Earth Sciences, University of Cambridge, Downing Street, Cambridge CB2 3EQ (United Kingdom)

    2011-03-02

    The issue of the net charge at insulating oxide interfaces is briefly reviewed with the ambition of dispelling myths of such charges being affected by covalency and related charge density effects. For electrostatic analysis purposes, the net charge at such interfaces is defined by the counting of discrete electrons and core ion charges, and by the definition of the reference polarization of the separate, unperturbed bulk materials. The arguments are illustrated for the case of a thin film of LaAlO{sub 3} over SrTiO{sub 3} in the absence of free carriers, for which the net charge is exactly 0.5e per interface formula unit, if the polarization response in both materials is referred to zero bulk values. Further consequences of the argument are extracted for structural and chemical alterations of such interfaces, in which internal rearrangements are distinguished from extrinsic alterations (changes of stoichiometry, redox processes), only the latter affecting the interfacial net charge. The arguments are reviewed alongside the proposal of Stengel and Vanderbilt (2009 Phys. Rev. B 80 241103) of using formal polarization values instead of net interfacial charges, based on the interface theorem of Vanderbilt and King-Smith (1993 Phys. Rev. B 48 4442-55). Implications for non-centrosymmetric materials are discussed, as well as for interfaces for which the charge mismatch is an integer number of polarization quanta. (viewpoint)

  10. Visible laser induced positive ion emissions from NaCl nanoparticles prepared by droplet rapid drying

    International Nuclear Information System (INIS)

    Sun, Mao-Xu; Guo, Deng-Zhu; Xing, Ying-Jie; Zhang, Geng-Min

    2012-01-01

    Highlights: ► NaCl nanoparticles were firstly prepared by heat induced explosion on silicon wafer. ► We found that laser induced ion emissions from NaCl nanoparticles are more prominent. ► We found that water adsorption can efficiently enhance laser induced ion emissions. ► The ultra-photothermal effect in NaCl nanoparticles was observed and explained. - Abstract: A novel convenient way for the formation of sodium chloride (NaCl) nanoparticles on silicon wafer is proposed by using a droplet rapid drying method. The laser induced positive ion emissions from NaCl nanoparticles with and without water treatment is demonstrated by using a laser desorption/ionization time-of-flight mass spectrometer, with laser intensity well below the plasma formation threshold. It is found that the positive ion emissions from NaCl nanoparticles are obviously higher than that from microsize NaCl particles under soft 532 nm laser irradiations, and water adsorption can efficiently enhance the ion emissions from NaCl nanoparticles. The initial kinetic energies of the emitted ions are estimated as 16–17 eV. The synergy of the ultra-thermal effect in nanomaterials, the defect-mediated multiphoton processes, and the existence of intermediate states in NaCl-water interfaces are suggested as the mechanisms.

  11. Design and Construction of Strain Gauge Interface Pressure ...

    African Journals Online (AJOL)

    Design and Construction of Strain Gauge Interface Pressure Transducer for Measurement of Static and Dynamic Interface Pressure Applied by Pressure Garments and its Relationship to Deep Vein Thrombosis.

  12. Comprometimento pulmonar na leptospirose

    Directory of Open Access Journals (Sweden)

    Jorge Eduardo Manhães de Carvalho

    1992-03-01

    Full Text Available Em 23 pacientes com leptospirose apresentando comprometimento pulmonar, internados no Hospital Universitário Antônio Pedro da XJFF, Niterói, hemoptise e hemoptóicos foram observados em 21,7% e 30,4%, respectivajnente. Gasometria arterial revelou hipoxemia e hipocapnia na maioria dos casos. Radiografia de tórax em 15 pacientes mostrou comprometimento alveolar em 60%, comprometimento intersticial-reticular em 6%, padrão misto (alveolar e intersticial em20%e ausência de alterações radiológicas em 14%. A necrópsiade 13 pacientes mostrou edema, congestão e hemorragia nos pulmões em 100% dos casos. A hemorragia foi focal em 46% e difusa em 54% dos casos. Houve formação de membrana hialina em 30% e trombos de fibrina em 46% dos pulmões estudados, o que estabelece o diagnóstico da coagulação intravascular disseminada e a ocorrência da síndrome de angústia respiratória na leptospirose.

  13. Simulation of Magnetic Phenomena at Realistic Interfaces

    KAUST Repository

    Grytsyuk, Sergiy

    2016-02-04

    In modern technology exciting developments are related to the ability to understand and control interfaces. Particularly, magnetic interfaces revealing spindependent electron transport are of great interest for modern spintronic devices, such as random access memories and logic devices. From the technological point of view, spintronic devices based on magnetic interfaces enable manipulation of the magnetism via an electric field. Such ability is a result of the different quantum effects arising from the magnetic interfaces (for example, spin transfer torque or spin-orbit torque) and it can reduce the energy consumption as compared to the traditional semiconductor electronic devices. Despite many appealing characteristics of these materials, fundamental understanding of their microscopic properties and related phenomena needs to be established by thorough investigation. In this work we implement first principles calculations in order to study the structural, electric, and magnetic properties as well as related phenomena of two types of interfaces with large potential in spintronic applications: 1) interfaces between antiferromagnetic 3d-metal-oxides and ferromagnetic 3d-metals and 2) interfaces between non-magnetic 5d(4d)- and ferromagnetic 3d-metals. A major difficulty in studying such interfaces theoretically is the typically large lattice mismatch. By employing supercells with Moir e patterns, we eliminate the artificial strain that leads to doubtful results and are able to describe the dependence of the atomic density at the interfaces on the component materials and their thicknesses. After establishing understanding about the interface structures, we investigate the electronic and magnetic properties. A Moir e supercell with transition layer is found to reproduce the main experimental findings and thus turns out to be the appropriate model for simulating magnetic misfit interfaces. In addition, we systematically study the magnetic anisotropy and Rashba band

  14. Nanoscaled Na3PS4Solid Electrolyte for All-Solid-State FeS2/Na Batteries with Ultrahigh Initial Coulombic Efficiency of 95% and Excellent Cyclic Performances.

    Science.gov (United States)

    Wan, Hongli; Mwizerwa, Jean Pierre; Qi, Xingguo; Xu, Xiaoxiong; Li, Hong; Zhang, Qiang; Cai, Liangting; Hu, Yong-Sheng; Yao, Xiayin

    2018-04-04

    Nanosized Na 3 PS 4 solid electrolyte with an ionic conductivity of 8.44 × 10 -5 S cm -1 at room temperature is synthesized by a liquid-phase reaction. The resultant all-solid-state FeS 2 /Na 3 PS 4 /Na batteries show an extraordinary high initial Coulombic efficiency of 95% and demonstrate high energy density of 611 Wh kg -1 at current density of 20 mA g -1 at room temperature. The outstanding performances of the battery can be ascribed to good interface compatibility and intimate solid-solid contact at FeS 2 electrode/nanosized Na 3 PS 4 solid electrolytes interface. Meanwhile, excellent cycling stability is achieved for the battery after cycling at 60 mA g -1 for 100 cycles, showing a high capacity of 287 mAh g -1 with the capacity retention of 80%.

  15. Aborto provocado e seletivo na interface da saúde e do direito

    OpenAIRE

    Wiese, Iria Raquel Borges

    2012-01-01

    O aborto é considerado um problema ético de saúde pública, e este se sobressai justamente quando existem conflitos entre os direitos e os deveres morais. Nesse sentido, são percebidos vários atores, em cenas diferentes, que reivindicam um poder de decisão sobre a vida, sejam médicos, juristas, governantes e outros providos de poderes Os motivos de se investigar o aborto a partir desses profissionais justificam-se pelo fato destes serem representantes do bio-poder, de um poder de decisão sobre...

  16. Spontaneous nano-gap formation in Ag film using NaCl sacrificial layer for Raman enhancement

    Science.gov (United States)

    Min, Kyungchan; Jeon, Wook Jin; Kim, Youngho; Choi, Jae-Young; Yu, Hak Ki

    2018-03-01

    We report the method of fabrication of nano-gaps (known as hot spots) in Ag thin film using a sodium chloride (NaCl) sacrificial layer for Raman enhancement. The Ag thin film (20–50 nm) on the NaCl sacrificial layer undergoes an interfacial reaction due to the AgCl formed at the interface during water molecule intercalation. The intercalated water molecules can dissolve the NaCl molecules at interfaces and form the ionic state of Na+ and Cl‑, promoting the AgCl formation. The Ag atoms can migrate by the driving force of this interfacial reaction, resulting in the formation of nano-size gaps in the film. The surface-enhanced Raman scattering activity of Ag films with nano-size gaps has been investigated using Raman reporter molecules, Rhodamine 6G (R6G).

  17. ANALIZA POSLOVNE KULTURE NA JAPONSKEM

    OpenAIRE

    Ocvirk, Katja

    2012-01-01

    Poslovanje na mednarodnih trgih se z globalizacijo vedno bolj spreminja. V delu diplomskega seminarja sem opredelila kulturo in opisala njene pomembne sestavine ter značilnosti. Spoznala sem, da mora biti poslovnež, ki deluje na mednarodnem trgu, zelo dobro pripravljen in seznanjen s kulturnimi razlikami, da se izogne nepotrebnim napakam in spodrsljajem. Menim, da moramo pri poslovanju s poslovnimi partnerji, ki prihajajo iz drugih kultur, vedeti, kako deluje njihovo poslovno okolje. Na ...

  18. Investigating effects of hypertonic saline solutions on lipid monolayers at the air-water interface

    KAUST Repository

    Nava Ocampo, Maria F.

    2017-05-01

    More than 70,000 people worldwide suffer from cystic fibrosis, a genetic disease characterized by chronic accumulation of mucus in patients’ lungs provoking bacterial infections, and leading to respiratory failure. An employed age-old treatment to prevent the symptoms of the disease is inhalation of hypertonic saline solution, NaCl at concentrations higher than in the human body (~150 mM). This procedure clears the mucus in the lungs, bringing relief to the patient. However, the biophysical mechanisms underlying this process are not entirely clear. We undertook a new experimental approach to understand the effects of sprayed saline solutions on model lung surfactants towards understanding the mechanisms of the treatment. The surface of lungs contains mainly 1,2-Dipalmitol-sn-glycero-3-phosphocoline (DPPC). As previously assumed by others, we considered that monolayer of DPPC at the air-water interface serves as model system for the lungs surface; we employed a Langmuir-Blodgett (LB) trough and PM-IRRAS to measure surface-specific infrared spectra of the surfactant monolayers and effects on the interfacial tensions. We investigated spraying hyper-saline solutions onto surfactant monolayers at the airwater interface in two parts: (i) validation of our methodology and techniques with stearic acid and (ii) experiments with DPPC monolayers at the air-water interface. Remarkably, when micro-droplets of NaCl were sprayed to the monolayer of stearic acid, we observed enhanced organization of the surfactant, interpreted from the intensities of the CH2 peaks in the surface-specific IR spectra. However, our results with DPPC monolayers didn’t show an effect with the salt added as aerosol, possibly indicating that the experimental methodology proposed is not adequate for the phenomena studied. In parallel, we mimicked respiratory mucous by preparing salt solutions containing 1% (wt%) agar and measured effects on their viscosities. Interestingly, we found that NaCl was much

  19. Impact of Annealing-Induced Intermixing on the Electronic Level Alignment at the In2S3/Cu(In,Ga)Se2 Thin-Film Solar Cell Interface.

    Science.gov (United States)

    Bär, Marcus; Barreau, Nicolas; Couzinié-Devy, François; Weinhardt, Lothar; Wilks, Regan G; Kessler, John; Heske, Clemens

    2016-01-27

    The interface between a nominal In2S3 buffer and a Cu(In,Ga)Se2 (CIGSe) thin-film solar cell absorber was investigated by direct and inverse photoemission to determine the interfacial electronic structure. On the basis of a previously reported heavy intermixing at the interface (S diffuses into the absorber; Cu diffuses into the buffer; and Na diffuses through it), we determine here the band alignment at the interface. The results suggest that the pronounced intermixing at the In2S3/CIGSe interface leads to a favorable electronic band alignment, necessary for high-efficiency solar cell devices.

  20. Oralidade e escrita na Teologia Pentecostal: acertos, riscos e possibilidades

    OpenAIRE

    Claiton Ivan Pommerening; CEEDUC

    2011-01-01

    A Igreja Evangélica Assembléia de Deus doutrina seus fiéis especialmente através da oralidade. Tenta-se mostrar as principais características das culturas orais, o poder e a dinâmica da linguagem e do som, como estas culturas se apropriam da oralidade para disseminar sua sabedoria e como se dá a interface entre cultura oral e cultura escrita. Explicitam-se também as características principais da oralidade na Assembléia de De...

  1. User Interface Technology for Formal Specification Development

    Science.gov (United States)

    Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

    1994-01-01

    Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.

  2. Spectrometer user interface to computer systems

    International Nuclear Information System (INIS)

    Salmon, L.; Davies, M.; Fry, F.A.; Venn, J.B.

    1979-01-01

    A computer system for use in radiation spectrometry should be designed around the needs and comprehension of the user and his operating environment. To this end, the functions of the system should be built in a modular and independent fashion such that they can be joined to the back end of an appropriate user interface. The point that this interface should be designed rather than just allowed to evolve is illustrated by reference to four related computer systems of differing complexity and function. The physical user interfaces in all cases are keyboard terminals, and the virtues and otherwise of these devices are discussed and compared with others. The language interface needs to satisfy a number of requirements, often conflicting. Among these, simplicity and speed of operation compete with flexibility and scope. Both experienced and novice users need to be considered, and any individual's needs may vary from naive to complex. To be efficient and resilient, the implementation must use an operating system, but the user needs to be protected from its complex and unfamiliar syntax. At the same time the interface must allow the user access to all services appropriate to his needs. The user must also receive an image of privacy in a multi-user system. The interface itself must be stable and exhibit continuity between implementations. Some of these conflicting needs have been overcome by the SABRE interface with languages operating at several levels. The foundation is a simple semimnemonic command language that activates indididual and independent functions. The commands can be used with positional parameters or in an interactive dialogue the precise nature of which depends upon the operating environment and the user's experience. A command procedure or macrolanguage allows combinations of commands with conditional branching and arithmetic features. Thus complex but repetitive operations are easily performed

  3. Language workbench user interfaces for data analysis

    Directory of Open Access Journals (Sweden)

    Victoria M. Benson

    2015-02-01

    Full Text Available Biological data analysis is frequently performed with command line software. While this practice provides considerable flexibility for computationally savy individuals, such as investigators trained in bioinformatics, this also creates a barrier to the widespread use of data analysis software by investigators trained as biologists and/or clinicians. Workflow systems such as Galaxy and Taverna have been developed to try and provide generic user interfaces that can wrap command line analysis software. These solutions are useful for problems that can be solved with workflows, and that do not require specialized user interfaces. However, some types of analyses can benefit from custom user interfaces. For instance, developing biomarker models from high-throughput data is a type of analysis that can be expressed more succinctly with specialized user interfaces. Here, we show how Language Workbench (LW technology can be used to model the biomarker development and validation process. We developed a language that models the concepts of Dataset, Endpoint, Feature Selection Method and Classifier. These high-level language concepts map directly to abstractions that analysts who develop biomarker models are familiar with. We found that user interfaces developed in the Meta-Programming System (MPS LW provide convenient means to configure a biomarker development project, to train models and view the validation statistics. We discuss several advantages of developing user interfaces for data analysis with a LW, including increased interface consistency, portability and extension by language composition. The language developed during this experiment is distributed as an MPS plugin (available at http://campagnelab.org/software/bdval-for-mps/.

  4. An interface tracking model for droplet electrocoalescence.

    Energy Technology Data Exchange (ETDEWEB)

    Erickson, Lindsay Crowl

    2013-09-01

    This report describes an Early Career Laboratory Directed Research and Development (LDRD) project to develop an interface tracking model for droplet electrocoalescence. Many fluid-based technologies rely on electrical fields to control the motion of droplets, e.g. microfluidic devices for high-speed droplet sorting, solution separation for chemical detectors, and purification of biodiesel fuel. Precise control over droplets is crucial to these applications. However, electric fields can induce complex and unpredictable fluid dynamics. Recent experiments (Ristenpart et al. 2009) have demonstrated that oppositely charged droplets bounce rather than coalesce in the presence of strong electric fields. A transient aqueous bridge forms between approaching drops prior to pinch-off. This observation applies to many types of fluids, but neither theory nor experiments have been able to offer a satisfactory explanation. Analytic hydrodynamic approximations for interfaces become invalid near coalescence, and therefore detailed numerical simulations are necessary. This is a computationally challenging problem that involves tracking a moving interface and solving complex multi-physics and multi-scale dynamics, which are beyond the capabilities of most state-of-the-art simulations. An interface-tracking model for electro-coalescence can provide a new perspective to a variety of applications in which interfacial physics are coupled with electrodynamics, including electro-osmosis, fabrication of microelectronics, fuel atomization, oil dehydration, nuclear waste reprocessing and solution separation for chemical detectors. We present a conformal decomposition finite element (CDFEM) interface-tracking method for the electrohydrodynamics of two-phase flow to demonstrate electro-coalescence. CDFEM is a sharp interface method that decomposes elements along fluid-fluid boundaries and uses a level set function to represent the interface.

  5. Understanding and Design of Polymer Device Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Kahn, Antoine [Princeton Univ., NJ (United States)

    2015-10-26

    The research performed under grant DE-FG02-04ER46165 between May 2008 and April 2011 focused on the understanding and control of interfaces of organic semiconductors in general, and polymer interfaces more specifically. This work was a joined effort by three experimentalists and a theoretician. Emphasis was placed on the determination of the electronic structure of these interfaces, i.e. the relative energy position of molecular levels across these interfaces. From these electronic structures depend the injection, extraction and transport of charge carriers into, from and across, respectively, all (opto)electronic devices made of these semiconductors. A significant fraction of our work focused on ways to modify and optimize interfaces, for example via chemical doping of the semiconductors to reduce interface energy barriers or via deposition of ultra-thin work function-reducing polymer or self-assembled monolayers of dipolar molecules. Another significant fraction of our work was devoted to exploring alternate and unconventional interface formation methods, in particular the soft-contact lamination of both metal contacts and polymer overlayers on top of polymer films. These methods allowed us to better understand the impact of hot metal atom evaporation on a soft organic surface, as well as the key mechanisms that control the energetics of polymer/polymer heterojunctions. Finally, a significant fraction of the research was directed to understanding the electronic structure of buried polymer heterojunctions, in particular within donor/acceptor blends of interest in organic photovoltaic applications. The work supported by this grant resulted in 17 publications in some of the best peer-reviewed journals of the field, as well as numerous presentations at US and international conferences.

  6. NA48 prototype calorimeter

    CERN Multimedia

    1990-01-01

    This is a calorimeter, a detector which measures the energy of particles. When in use, it is filled with liquid krypton at -152°C. Electrons and photons passing through interact with the krypton, creating a shower of charged particles which are collected on the copper ribbons. The ribbons are aligned to an accuracy of a tenth of a millimetre. The folding at each end allows them to be kept absolutely flat. Each shower of particles also creates a signal in scintillating material embedded in the support disks. These flashes of light are transmitted to electronics by the optical fibres along the side of the detector. They give the time at which the interaction occurred. The photo shows the calorimeter at NA48, a CERN experiment which is trying to understand the lack of anti-matter in the Universe today.

  7. Na Cauda do Cometa

    Science.gov (United States)

    Voelzke, M. R.

    2009-01-01

    Quando viam um cometa, os antigos gregos imaginavam uma estrela com uma vasta cabeleira. Não à toa, a palavra deriva do termo koma, que significa cabelo. Constituídos por fragmentos de gelo e gases, os cometas possuem um núcleo sólido, que pode ter vários quilômetros de diâmetro, e uma cauda que sempre aponta na direção contrária ao Sol, devido aos ventos solares. Graças à aparência de pontos luminosos em movimento (ao contrário de outros astros, que parecem estáticos), esses corpos celestes foram interpretados por diferentes povos com muito misticismo, inspirando mitos tanto de boas-novas como de maus presságios. Conheça algumas dessas histórias:

  8. A ENGENHARIA NA ESCOLA

    Directory of Open Access Journals (Sweden)

    Valéria Pelizzer Casara

    2015-04-01

    Full Text Available Este projeto teve por objetivo principal mostrar às jovens do ensino médio, como as áreas de exatas e de engenharia podem estar inseridas em situações rotineiras por elas vivenciadas e incentivá-las para ingressarem nessas áreas. O projeto foi executado na escola de ensino Médio Nelson Horostecki na cidade de Chapecó, Santa Catarina. Mostrou-se de forma simples que as áreas de exatas e de engenharia têm aplicações práticas nas nossas vidas. No desenvolvimento do projeto, realizaram-se oficinas na escola cujo tema principal abordado foi o processo de fabricação do chocolate, visto que o mesmo é um produto muito apreciado pelas adolescentes. Dentro dessa temática, foram trabalhadas as questões que envolvem conhecimentos das áreas de exatas e de engenharia, mais especificamente a Engenharia Ambiental. O projeto auxiliou na formação cidadã e também na escolha profissional das meninas. Muitas das alunas participantes nunca haviam tido contato direto com alunos graduandos de cursos na área das exatas. Mais ainda, este projeto oportunizou a aproximação da universidade com a comunidade externa. Palavras-chave: Extensão Universitária, Ciências Exatas e Engenharia, Chocolate, Oficinas.   Engineering in the school Abstract: The main objective of this project was to show high school female students how the exact sciences and engineering can be included in their routine situations encouraging them to entering in these areas. The project was carried out at the Nelson Horostecki High School in Chapecó, Santa Catarina State, Brazil. It was showed in a simple manner how exact sciences and engineering have practical applications in our lives. Workshops were conducted in the school during the execution of the project in which the main subject was the chocolate manufacturing process, since chocolate is a product greatly appreciated by the young female people. Within this matter, the activities were performed using the knowledge of

  9. Structural characterization of water-metal interfaces

    Science.gov (United States)

    Ryczko, Kevin; Tamblyn, Isaac

    2017-08-01

    We analyze and compare the structural, dynamical, and electronic properties of liquid water next to prototypical metals including Pt, graphite, and graphene. Our results are built on Born-Oppenheimer molecular dynamics (BOMD) generated using density functional theory (DFT) which explicitly include van der Waals (vdW) interactions within a first principles approach. All calculations reported use large simulation cells, allowing for an accurate treatment of the water-electrode interfaces. We have included vdW interactions through the use of the optB86b-vdW exchange correlation functional. Comparisons with the Perdew-Burke-Ernzerhof (PBE) exchange correlation functional are also shown. We find an initial peak, due to chemisorption, in the density profile of the liquid water-Pt interface not seen in the liquid water-graphite interface, liquid water-graphene interface, nor interfaces studied previously. To further investigate this chemisorption peak, we also report differences in the electronic structure of single water molecules on both Pt and graphite surfaces. We find that a covalent bond forms between the single water molecule and the Pt surface but not between the single water molecule and the graphite surface. We also discuss the effects that defects and dopants in the graphite and graphene surfaces have on the structure and dynamics of liquid water.

  10. From atomistic interfaces to dendritic patterns

    Science.gov (United States)

    Galenko, P. K.; Alexandrov, D. V.

    2018-01-01

    Transport processes around phase interfaces, together with thermodynamic properties and kinetic phenomena, control the formation of dendritic patterns. Using the thermodynamic and kinetic data of phase interfaces obtained on the atomic scale, one can analyse the formation of a single dendrite and the growth of a dendritic ensemble. This is the result of recent progress in theoretical methods and computational algorithms calculated using powerful computer clusters. Great benefits can be attained from the development of micro-, meso- and macro-levels of analysis when investigating the dynamics of interfaces, interpreting experimental data and designing the macrostructure of samples. The review and research articles in this theme issue cover the spectrum of scales (from nano- to macro-length scales) in order to exhibit recently developing trends in the theoretical analysis and computational modelling of dendrite pattern formation. Atomistic modelling, the flow effect on interface dynamics, the transition from diffusion-limited to thermally controlled growth existing at a considerable driving force, two-phase (mushy) layer formation, the growth of eutectic dendrites, the formation of a secondary dendritic network due to coalescence, computational methods, including boundary integral and phase-field methods, and experimental tests for theoretical models-all these themes are highlighted in the present issue. This article is part of the theme issue `From atomistic interfaces to dendritic patterns'.

  11. Human computer interface guide, revision A

    Science.gov (United States)

    1993-01-01

    The Human Computer Interface Guide, SSP 30540, is a reference document for the information systems within the Space Station Freedom Program (SSFP). The Human Computer Interface Guide (HCIG) provides guidelines for the design of computer software that affects human performance, specifically, the human-computer interface. This document contains an introduction and subparagraphs on SSFP computer systems, users, and tasks; guidelines for interactions between users and the SSFP computer systems; human factors evaluation and testing of the user interface system; and example specifications. The contents of this document are intended to be consistent with the tasks and products to be prepared by NASA Work Package Centers and SSFP participants as defined in SSP 30000, Space Station Program Definition and Requirements Document. The Human Computer Interface Guide shall be implemented on all new SSFP contractual and internal activities and shall be included in any existing contracts through contract changes. This document is under the control of the Space Station Control Board, and any changes or revisions will be approved by the deputy director.

  12. Adsorption of polymer chains at penetrable interfaces

    International Nuclear Information System (INIS)

    Gerasimchuk, I. V.; Sommer, J.-U.; Gerasimchuk, V. S.

    2011-01-01

    We investigate the problem of adsorption (localization) of polymer chains in the system of two penetrable interfaces within the mean-field approximation. The saturation of the polymer system in the limit case of zero bulk concentration is studied. We find the exact solution of this mean-field polymer adsorption problem that opens the possibility to treat various localization problems for polymer chains in such environments using appropriate boundary conditions. The exact solution is controlled by a single scaling variable that describes the coupling between the interfaces due to the polymer chains. We obtain a nonmonotonic behavior of the amount of adsorbed polymers as a function of the distance between the interfaces. This leads to a high-energy and a low-energy phase for the double layer with respect to the amount of polymers localized. At the saturation point, we find the total energy of the system and determine the force acting between the interfaces to be strictly attractive and to monotonically decay to zero when the interface distance increases.

  13. Chemistry of the copper silicon interface

    International Nuclear Information System (INIS)

    Ford, M.J.; Sashin, V.A.; Nixon, K.

    2002-01-01

    Full text: Copper and silicon readily interdiffuse, even at room temperature, to form an interface which can be several nanometers thick. Over the years considerable effort has gone into investigating the diffusion process and chemical nature of the interface formed. Photoemission measurements give evidence for the formation of a stable suicide with a definite stoichiometry, Cu 3 Si. This is evidenced by splitting of the Si LVV Auger line and slight shifts and change in shape of the copper valence band density of states as measured by ultra-violet photoemission. In this paper we present calculations of the electronic structure of copper suicide, bulk copper and silicon, and preliminary measurements of the interface by electron momentum spectroscopy. Densities of states for copper and copper suicide are dominated by the copper 3d bands, and difference between the two compounds are relatively small. By contrast, the full band structures are quite distinct. Hence, experimental measurements of the full band structure of the copper on silicon interface, for example by EMS, have the potential to reveal the chemistry of the interface in a detailed way

  14. Anchored design of protein-protein interfaces.

    Directory of Open Access Journals (Sweden)

    Steven M Lewis

    Full Text Available Few existing protein-protein interface design methods allow for extensive backbone rearrangements during the design process. There is also a dichotomy between redesign methods, which take advantage of the native interface, and de novo methods, which produce novel binders.Here, we propose a new method for designing novel protein reagents that combines advantages of redesign and de novo methods and allows for extensive backbone motion. This method requires a bound structure of a target and one of its natural binding partners. A key interaction in this interface, the anchor, is computationally grafted out of the partner and into a surface loop on the design scaffold. The design scaffold's surface is then redesigned with backbone flexibility to create a new binding partner for the target. Careful choice of a scaffold will bring experimentally desirable characteristics into the new complex. The use of an anchor both expedites the design process and ensures that binding proceeds against a known location on the target. The use of surface loops on the scaffold allows for flexible-backbone redesign to properly search conformational space.This protocol was implemented within the Rosetta3 software suite. To demonstrate and evaluate this protocol, we have developed a benchmarking set of structures from the PDB with loop-mediated interfaces. This protocol can recover the correct loop-mediated interface in 15 out of 16 tested structures, using only a single residue as an anchor.

  15. Interface-Induced Phenomena in Magnetism.

    Science.gov (United States)

    Hellman, Frances; Hoffmann, Axel; Tserkovnyak, Yaroslav; Beach, Geoffrey S D; Fullerton, Eric E; Leighton, Chris; MacDonald, Allan H; Ralph, Daniel C; Arena, Dario A; Dürr, Hermann A; Fischer, Peter; Grollier, Julie; Heremans, Joseph P; Jungwirth, Tomas; Kimel, Alexey V; Koopmans, Bert; Krivorotov, Ilya N; May, Steven J; Petford-Long, Amanda K; Rondinelli, James M; Samarth, Nitin; Schuller, Ivan K; Slavin, Andrei N; Stiles, Mark D; Tchernyshyov, Oleg; Thiaville, André; Zink, Barry L

    2017-01-01

    This article reviews static and dynamic interfacial effects in magnetism, focusing on interfacially-driven magnetic effects and phenomena associated with spin-orbit coupling and intrinsic symmetry breaking at interfaces. It provides a historical background and literature survey, but focuses on recent progress, identifying the most exciting new scientific results and pointing to promising future research directions. It starts with an introduction and overview of how basic magnetic properties are affected by interfaces, then turns to a discussion of charge and spin transport through and near interfaces and how these can be used to control the properties of the magnetic layer. Important concepts include spin accumulation, spin currents, spin transfer torque, and spin pumping. An overview is provided to the current state of knowledge and existing review literature on interfacial effects such as exchange bias, exchange spring magnets, spin Hall effect, oxide heterostructures, and topological insulators. The article highlights recent discoveries of interface-induced magnetism and non-collinear spin textures, non-linear dynamics including spin torque transfer and magnetization reversal induced by interfaces, and interfacial effects in ultrafast magnetization processes.

  16. Man machine interface and its implementation

    International Nuclear Information System (INIS)

    Hills, B.G.; Boettcher, D.B.; Reed, R.

    1992-01-01

    Sizewell B is the latest nuclear power station to be constructed in the United Kingdom: its Man-Machine Interfaces are therefore, by definition, the state-of-the-art. This paper discusses the principal Man-Machine Interfaces used in the operation of the station, and the systems that implement them. The Man-Machine Interface facilities discussed are: in the Main Control Room, which is used for normal operation and shutdown of the plant: in the Auxiliary Shutdown Room, which allows shutdown of the reactor if evacuation of the main Control Room is necessary: and in the Technical Support Centre, which is used for remote monitoring of the plant. The Man-Machine Interfaces that are described are parts of a station-wide group of interlinked computer systems called the Data Processing and Control System. This system collects data from the plant and displays it to the operators via discrete devices and on graphical computer displays. It also acquires control inputs from the operators via switches, which are then used to provide remote manual control, modulating control and sequence control. The computer system that handles the plant process data and alarm information displays uses a windowing interface with keyboard and trackerball navigation to allow easy retrieval and viewing of information. It is this system that is the main topic of this paper. (author)

  17. Interface Metaphors for Interactive Machine Learning

    Energy Technology Data Exchange (ETDEWEB)

    Jasper, Robert J.; Blaha, Leslie M.

    2017-07-14

    To promote more interactive and dynamic machine learn- ing, we revisit the notion of user-interface metaphors. User-interface metaphors provide intuitive constructs for supporting user needs through interface design elements. A user-interface metaphor provides a visual or action pattern that leverages a user’s knowledge of another domain. Metaphors suggest both the visual representations that should be used in a display as well as the interactions that should be afforded to the user. We argue that user-interface metaphors can also offer a method of extracting interaction-based user feedback for use in machine learning. Metaphors offer indirect, context-based information that can be used in addition to explicit user inputs, such as user-provided labels. Implicit information from user interactions with metaphors can augment explicit user input for active learning paradigms. Or it might be leveraged in systems where explicit user inputs are more challenging to obtain. Each interaction with the metaphor provides an opportunity to gather data and learn. We argue this approach is especially important in streaming applications, where we desire machine learning systems that can adapt to dynamic, changing data.

  18. Web interface for plasma analysis codes

    Energy Technology Data Exchange (ETDEWEB)

    Emoto, M. [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan)], E-mail: emo@nifs.ac.jp; Murakami, S. [Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto 606-8501 (Japan); Yoshida, M.; Funaba, H.; Nagayama, Y. [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan)

    2008-04-15

    There are many analysis codes that analyze various aspects of plasma physics. However, most of them are FORTRAN programs that are written to be run in supercomputers. On the other hand, many scientists use GUI (graphical user interface)-based operating systems. For those who are not familiar with supercomputers, it is a difficult task to run analysis codes in supercomputers, and they often hesitate to use these programs to substantiate their ideas. Furthermore, these analysis codes are written for personal use, and the programmers do not expect these programs to be run by other users. In order to make these programs to be widely used by many users, the authors developed user-friendly interfaces using a Web interface. Since the Web browser is one of the most common applications, it is useful for both the users and developers. In order to realize interactive Web interface, AJAX technique is widely used, and the authors also adopted AJAX. To build such an AJAX based Web system, Ruby on Rails plays an important role in this system. Since this application framework, which is written in Ruby, abstracts the Web interfaces necessary to implement AJAX and database functions, it enables the programmers to efficiently develop the Web-based application. In this paper, the authors will introduce the system and demonstrate the usefulness of this approach.

  19. A framework of interface improvements for designing new user interfaces for the MANUS robot arm

    NARCIS (Netherlands)

    Tijsma, H.A.; Liefhebber, F.; Herder, J.L.

    2005-01-01

    Users of the MANUS robot arm experience a high cognitive and physical load when performing activities of daily living with the arm. These high loads originate from user interface problems and limitations. To reduce these high loads the user interface of the MANUS needs to be improved. Because large

  20. More playful user interfaces: interfaces that invite social and physical interaction

    NARCIS (Netherlands)

    Nijholt, Antinus; Unknown, [Unknown

    2015-01-01

    This book covers the latest advances in playful user interfacesinterfaces that invite social and physical interaction. These new developments include the use of audio, visual, tactile and physiological sensors to monitor, provide feedback and anticipate the behavior of human users. The decreasing

  1. Diffuse interface model of surfactant adsorption onto flat and droplet interfaces

    NARCIS (Netherlands)

    Sman, van der R.G.M.; Graaf, van der S.

    2006-01-01

    For applications where droplet breakup and surfactant adsorption are strongly coupled, a diffuse interface model is developed. The model is based on a free energy functional, partly adapted from the sharp interface model of [Diamant and Andelman 34(8):575-580, (1996)]. The model is implemented as a

  2. SWMM5 Application Programming Interface and PySWMM: A Python Interfacing Wrapper

    Science.gov (United States)

    In support of the OpenWaterAnalytics open source initiative, the PySWMM project encompasses the development of a Python interfacing wrapper to SWMM5 with parallel ongoing development of the USEPA Stormwater Management Model (SWMM5) application programming interface (API). ...

  3. Exploring Dynamic User–Interface in Achieving Software Application ...

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-09-01

    Sep 1, 2013 ... Software applications are explored for any desired operation through their various interfaces. User-interface is a term synonymous with computer ergonomics which is concerned with the human-computer interface. Dynamic user-interface ensures an evolving technology that harmonizes and aligns the links ...

  4. Network device interface for digitally interfacing data channels to a controller a via network

    Science.gov (United States)

    Ellerbrock, Philip J. (Inventor); Grant, Robert L. (Inventor); Konz, Daniel W. (Inventor); Winkelmann, Joseph P. (Inventor)

    2006-01-01

    The present invention provides a network device interface and method for digitally connecting a plurality of data channels to a controller using a network bus. The network device interface interprets commands and data received from the controller and polls the data channels in accordance with these commands. Specifically, the network device interface receives digital commands and data from the controller, and based on these commands and data, communicates with the data channels to either retrieve data in the case of a sensor or send data to activate an actuator. In one embodiment, the bus controller transmits messages to the network device interface containing a plurality of bits having a value defined by a transition between first and second states in the bits. The network device interface determines timing of the data sequence of the message and uses the determined timing to communicate with the bus controller.

  5. Workshop on surface and interface science at the ESRF

    Energy Technology Data Exchange (ETDEWEB)

    Norris, C.; Stierle, A.; Kasper, N.; Dosch, H.; Schmidt, S.; Hufner, S.; Moritz, W.; Fedley, Ch.S.; Rossi, G.; Durr Hermann, A.; Rohlsberger, R.; Dalmas, J.; Oughaddou, H.; Leandri, Ch.; Gay, J.M.; Treglia, G.; Le Lay, G.; Aufray, B.; Bunk, O.; Johnson, R.L.; Frenken, J.W.M.; Lucas, C.A.; Bauer, G.; Zhong, Z.; Springholz, G.; Lechner, R.; Stang, J.; Schulli, T.; Metzger, T.H.; Holy, V.; Woodruff, D.P.; Dellera, C.; Zegenhagen, J.; Robinson, I.; Malachias, A.; Schulli, T.U.; Magalhaes-Paniago, R.; Stoffel, M.; Schmidt, O.G.; Boragno, C.; Buatier de Mongeot, F.; Valbusa, U.; Felici, R.; Yacoby, Y.; Bedzyk, M.J.; Van der Veen, J.F

    2004-07-01

    The main aim of the workshop is to reflect the future of surface and interface research at the high brilliance synchrotron radiation source ESRF taking into account experimental facilities which are becoming available at new synchrotron radiation facilities in Europe. 6 sessions have been organized: 1) surface and interface research and synchrotron radiation - today and tomorrow -, 2) aspects of surface and interface research, 3) real surfaces and interfaces, 4) synchrotron techniques in surface and interface research, 5) new directions in surface and interface research, and 6) surface and interface science at ESRF. This document gathers the abstracts of the presentations.

  6. Workshop on surface and interface science at the ESRF

    International Nuclear Information System (INIS)

    Norris, C.; Stierle, A.; Kasper, N.; Dosch, H.; Schmidt, S.; Hufner, S.; Moritz, W.; Fedley, Ch.S.; Rossi, G.; Durr Hermann, A.; Rohlsberger, R.; Dalmas, J.; Oughaddou, H.; Leandri, Ch.; Gay, J.M.; Treglia, G.; Le Lay, G.; Aufray, B.; Bunk, O.; Johnson, R.L.; Frenken, J.W.M.; Lucas, C.A.; Bauer, G.; Zhong, Z.; Springholz, G.; Lechner, R.; Stang, J.; Schulli, T.; Metzger, T.H.; Holy, V.; Woodruff, D.P.; Dellera, C.; Zegenhagen, J.; Robinson, I.; Malachias, A.; Schulli, T.U.; Magalhaes-Paniago, R.; Stoffel, M.; Schmidt, O.G.; Boragno, C.; Buatier de Mongeot, F.; Valbusa, U.; Felici, R.; Yacoby, Y.; Bedzyk, M.J.; Van der Veen, J.F.

    2004-01-01

    The main aim of the workshop is to reflect the future of surface and interface research at the high brilliance synchrotron radiation source ESRF taking into account experimental facilities which are becoming available at new synchrotron radiation facilities in Europe. 6 sessions have been organized: 1) surface and interface research and synchrotron radiation - today and tomorrow -, 2) aspects of surface and interface research, 3) real surfaces and interfaces, 4) synchrotron techniques in surface and interface research, 5) new directions in surface and interface research, and 6) surface and interface science at ESRF. This document gathers the abstracts of the presentations

  7. Hodler à Iéna

    OpenAIRE

    2017-01-01

    A la mort de Hodler, on demanda que les planches qui recouvrait la fresque de Iéna, depuis la protestation contre le bombardement de Reims, soit enlevées. Les autorités de Iéna ont refusé énergiquement.

  8. Statistical analysis of radial interface growth

    International Nuclear Information System (INIS)

    Masoudi, A A; Hosseinabadi, S; Khorrami, M; Davoudi, J; Kohandel, M

    2012-01-01

    Recent studies have questioned the application of standard scaling analysis to study radially growing interfaces (Escudero 2008 Phys. Rev. Lett. 100 116101; 2009 Ann. Phys. 324 1796). We show that the radial Edwards–Wilkinson (EW) equation belongs to the same universality as that obtained in the planar geometry. In addition, we use numerical simulations to calculate the interface width for both random deposition with surface relaxation (RDSR) and restricted solid on solid (RSOS) models, assuming that the system size increases linearly with time (due to radial geometry). By applying appropriate rules for each model, we show that the interface width increases with time as t β , where the exponent β is the same as those obtained from the corresponding planar geometries. (letter)

  9. Electrostatic effects at interfaces and adhesion problems

    International Nuclear Information System (INIS)

    Lorang, G.; Langeron, J.P.

    1992-01-01

    Electrostatic effects are usually observed at the interface of thin aluminium films deposited on polypropylene substrates during depth profiling analysis by Auger electron spectroscopy (AES). Charging build up is characterized by energy shifts of Auger spectra towards higher kinetic energies. These insulating layers (10 to 20 nm) are partially or totally eliminated when the polymer is, prior to the metallization process, submitted either to low pressure (argon, nitrogen or ammoniac) plasma or to inert ion etching treatments. A lowering of oxygen and alumina contents at interfaces and an improved adhesion behavior were simultaneously noted. With Al deposits performed in UHV conditions onto a sputter cleaned substrate: a graphitic-like layer was probably created which ensures the complete removal of the electric charges during analysis at the Al/'polymer' interface, where a direct chemical bonding Al-C was displayed by AES. (Author). 8 refs., 2 figs

  10. Spin-Orbitronics at Transition Metal Interfaces

    KAUST Repository

    Manchon, Aurelien

    2017-11-09

    The presence of large spin–orbit interaction at transition metal interfaces enables the emergence of a variety of fascinating phenomena that have been at the forefront of spintronics research in the past 10 years. The objective of the present chapter is to offer a review of these various effects from a theoretical perspective, with a particular focus on spin transport, chiral magnetism, and their interplay. After a brief description of the orbital hybridization scheme at transition metal interfaces, we address the impact of spin–orbit coupling on the interfacial magnetic configuration, through the celebrated Dzyaloshinskii–Moriya interaction. We then discuss the physics of spin transport and subsequent torques occurring at these interfaces. We particularly address the spin Hall, spin swapping, and inverse spin-galvanic effects. Finally, the interplay between flowing charges and chiral magnetic textures and their induced dynamics are presented. We conclude this chapter by proposing some perspectives on promising research directions.

  11. Cellular nanotechnology: making biological interfaces smarter.

    Science.gov (United States)

    Mendes, Paula M

    2013-12-21

    Recently, there has been an outburst of research on engineered cell-material interfaces driven by nanotechnology and its tools and techniques. This tutorial review begins by providing a brief introduction to nanostructured materials, followed by an overview of the wealth of nanoscale fabrication and analysis tools available for their development. This background serves as the basis for a discussion of early breakthroughs and recent key developments in the endeavour to develop nanostructured materials as smart interfaces for fundamental cellular studies, tissue engineering and regenerative medicine. The review covers three major aspects of nanostructured interfaces - nanotopographical control, dynamic behaviour and intracellular manipulation and sensing - where efforts are continuously being made to further understand cell function and provide new ways to control cell behaviour. A critical reflection of the current status and future challenges are discussed as a conclusion to the review.

  12. Analysing organic transistors based on interface approximation

    International Nuclear Information System (INIS)

    Akiyama, Yuto; Mori, Takehiko

    2014-01-01

    Temperature-dependent characteristics of organic transistors are analysed thoroughly using interface approximation. In contrast to amorphous silicon transistors, it is characteristic of organic transistors that the accumulation layer is concentrated on the first monolayer, and it is appropriate to consider interface charge rather than band bending. On the basis of this model, observed characteristics of hexamethylenetetrathiafulvalene (HMTTF) and dibenzotetrathiafulvalene (DBTTF) transistors with various surface treatments are analysed, and the trap distribution is extracted. In turn, starting from a simple exponential distribution, we can reproduce the temperature-dependent transistor characteristics as well as the gate voltage dependence of the activation energy, so we can investigate various aspects of organic transistors self-consistently under the interface approximation. Small deviation from such an ideal transistor operation is discussed assuming the presence of an energetically discrete trap level, which leads to a hump in the transfer characteristics. The contact resistance is estimated by measuring the transfer characteristics up to the linear region

  13. Evaluation of Explanation Interfaces in Recommender Systems

    Directory of Open Access Journals (Sweden)

    Sergio Cleger-Tamayo

    2017-05-01

    Full Text Available Explaining interfaces become a useful tool in systems that have a lot of content to evaluate by users. The different interfaces represent a help for the undecided users or those who consider systems as boxed black smart. These systems present recommendations to users based on different learning models. In this paper, we present the different objectives of the explanation interfaces and some of the criteria that you can evaluate, as well as a proposal of metrics to obtain results in the experiments. Finally, we showed the main results of a study with real users and their interaction with e-commerce systems. Among the main results, highlight the positive impact in relation to the time of interaction with the applications and acceptance of the recommendations received.

  14. Interface for liquid chromatograph-mass spectrometer

    Science.gov (United States)

    Andresen, Brian D.; Fought, Eric R.

    1989-01-01

    A moving belt interface for real-time, high-performance liquid chromatograph (HPLC)/mass spectrometer (MS) analysis which strips away the HPLC solvent as it emerges from the end of the HPLC column and leaves a residue suitable for mass-spectral analysis. The interface includes a portable, stand-alone apparatus having a plural stage vacuum station, a continuous ribbon or belt, a drive train magnetically coupled to an external drive motor, a calibrated HPLC delivery system, a heated probe tip and means located adjacent the probe tip for direct ionization of the residue on the belt. The interface is also capable of being readily adapted to fit any mass spectrometer.

  15. Interface matrix method in AFEN framework

    Energy Technology Data Exchange (ETDEWEB)

    Pogosbekyan, Leonid; Cho, Jin Young; Kim, Young Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    In this study, we extend the application of the interface-matrix(IM) method for reflector modeling to Analytic Flux Expansion Nodal (AFEN) method. This include the modifications of the surface-averaged net current continuity and the net leakage balance conditions for IM method in accordance with AFEN formula. AFEN-interface matrix (AFEN-IM) method has been tested against ZION-1 benchmark problem. The numerical result of AFEN-IM method shows 1.24% of maximum error and 0.42% of root-mean square error in assembly power distribution, and 0.006% {Delta} k of neutron multiplication factor. This result proves that the interface-matrix method for reflector modeling can be useful in AFEN method. 3 refs., 4 figs. (Author)

  16. Solid surfaces, interfaces and thin films

    CERN Document Server

    Lüth, Hans

    2015-01-01

    This book emphasises both experimental and theoretical aspects of surface, interface and thin-film physics. As in previous editions the preparation of surfaces and thin films, their atomic and morphological structure, their vibronic and electronic properties as well as fundamentals of adsorption are treated. Because of their importance in modern information technology and nanostructure research, particular emphasis is paid to electronic surface and interface states, semiconductor space charge layers and heterostructures. A special chapter of the book is devoted to collective phenomena at interfaces and in thin films such as superconductivity and magnetism. The latter topic includes the meanwhile important issues giant magnetoresistance and spin-transfer torque mechanism, both effects being of high interest in information technology. In this new edition, for the first time, the effect of spin-orbit coupling on surface states is treated. In this context the class of the recently detected topological insulators,...

  17. A simple FASTBUS to ethernet interface

    International Nuclear Information System (INIS)

    Baudendistel, K.; Dobinson, R.W.; Downing, R.W.; Herbert, M.J.

    1985-01-01

    Until comparatively recently the effort and the expense of interfacing to Ethernet has been considerable, both in terms of design time and the number of integrated circuits required. However, the appearance of VLSI chip sets from several manufacturers, which perform large parts of the lower level network protocols, has done much to ease this problem. One of the first chip sets available was that manufactured by the SEEQ company of San Jose, California. We have successfully constructed and operated controller boards for the IBM PC using these chips. We report here on an extension of this work to construct a simple interface between FASTBUS and Ethernet. The motivation for the work is twofold; first to make available Ethernet products and services from a FASTBUS environment, secondly to investigate the interconnection of FASTBUS segments over longer distances than is possible using the present cable segment and segment interconnects. The emphasis of this paper is on how the interface appears to a FASTBUS user

  18. Kapitza conductance of solid - liquid helium interfaces

    International Nuclear Information System (INIS)

    Wyatt, A.F.G.

    1981-01-01

    In this article, the author describes the acoustic-mismatch model and the deficiencies of this model in describing and predicting the conductance behavior of solid-liquid helium interfaces. By reviewing the experimental data, the author finds that the conductivity of these interfaces exceeds that which is predicted by the Kapitza effect. The classical channel of conductance, as expressed in Khalatnikov's calculation of the transmission coefficient, works at temperatures 4F .05 K. A background channel that functions in parallell to the classical channel conducts phonons at greater temperatures. The author reviews the values of the transmission coefficients as found in a variety of experiments and describes the variation between the behavior of the classical and the background channels, particularly in the area of frequency conservation. The bulk of the reviewed data points out the flaws in using the Kapitza effect as an explanation of high conductivity in these interfaces and the author looks for new explanations in the future

  19. Polymer nanocomposites for sealing microannulus cracks in wellbores cement-steel interface

    Science.gov (United States)

    Genedy, M.; Fernandez, S. G.; Stormont, J.; Matteo, E. N.; Dewers, T. A.; Reda Taha, M.

    2017-12-01

    Seal integrity of production and storage wellbores has become a critical challenge with the increasing oil and gas leakage incidents. The general consensus is that one of the potential leakage pathways is micro-annuli at the cement-steel interface. In this paper, we examine the efficiency of proposed polymer nanocomposite to seal microannulus cracks at the cement-steel interface. The repair material efficiency is defined as the ability of the repair material to reduce or eliminate the gas permeability of the cement-steel interface. The flow rate of an inert gas (Nitrogen) at the cement-steel interface was investigated for three cases: 1) repaired test samples with traditional repair material (microfine cement), 2) polymer nanocomposites, and 3) unrepaired test samples. Flow rates were measured and compared for all three cases. The experimental results show up to 99.5% seal efficiency achieved by using polymer nanocomposites compared to 20% efficiency achieved in the case of microfine cement. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. SAND2017-8094 A.

  20. Establishment of in situ TEM-implanter/accelerator interface facility at Wuhan University

    International Nuclear Information System (INIS)

    Guo, L.P.; Liu, C.S.; Li, M.; Song, B.; Ye, M.S.; Fu, D.J.; Fan, X.J.

    2008-01-01

    In order to perform in situ investigations on the evolution of microstructures during ion irradiation for the evaluation of irradiation-resistance performance of advanced materials, we have established a transmission electron microscope (TEM)-implanter/accelerator interface facility at Wuhan University, the first of its kind in China. A Hitachi H800 TEM was linked to a 200 kV ion implanter and a 2x1.7 MV tandem accelerator through the interface system designed on the basis of ion beam transportation calculations. Effective steps were taken to isolate the TEM from mechanical vibration transmitted from the ion beam lines, and no significant degradation of microscope resolution was observed when the TEM operated under high zoom modes during the ion implantation. In the test experiments, ion beams of N + , He + , Ar + , and H + were successfully transported from the implanter into the TEM chamber through the interface system, and the ion currents measured at the entrance of the TEM column were between 20 and 80 nA. The amorphisation process of Si crystal irradiated by N + ion beams was successfully observed in the preliminary experiments, demonstrating that this interface facility is capable of in situ study of ion irradiated samples

  1. Building Subsurface Velocity Models with Sharp Interfaces Using Interface-Guided Seismic Full-Waveform Inversion

    Science.gov (United States)

    Lin, Youzuo; Huang, Lianjie

    2017-11-01

    Reverse-time migration has the potential to image complex subsurface structures, including steeply-dipping fault zones, but the method requires an accurate velocity model. Acoustic- and elastic-waveform inversion is a promising tool for high-resolution velocity model building. Because of the ill-posedness of acoustic- and elastic-waveform inversion, it is a great challenge to obtain accurate velocity models containing sharp interfaces. To improve velocity model building, we develop an acoustic- and elastic-waveform inversion method with an interface-guided modified total-variation regularization scheme to improve the inversion accuracy and robustness, particularly for models with sharp interfaces and steeply-dipping fault zones with widths much smaller than the seismic wavelength. The new regularization scheme incorporates interface information into seismic full-waveform inversion. The interface information of subsurface interfaces is obtained iteratively using migration imaging during waveform inversion. Seismic migration is robust for subsurface imaging. Our new acoustic- and elastic-waveform inversion takes advantage of the robustness of migration imaging to improve velocity estimation. We use synthetic seismic data for a complex model containing sharp interfaces and several steeply-dipping fault zones to validate the improved capability of our new acoustic- and elastic-waveform inversion method. Our inversion results are much better than those produced without using interface-guided regularization. Acoustic- and elastic-waveform inversion with an interface-guided modified total-variation regularization scheme has the potential to accurately build subsurface velocity models with sharp interfaces and/or steep fault zones.

  2. Interfacing CAMAC instrumentation to the USB port

    International Nuclear Information System (INIS)

    Ribas, R.V.

    2010-01-01

    Full text. CAMAC instrumentation like ADCs, TDCs, scalers, etc. are still very useful in data acquisition system for low energy nuclear physics. Since the popularity of this norm decreased strongly in the last 10-15 years, most of the interfaces of the CAMAC crate controller to micro computers are no longer available in modern computers (ISA slots, GPIB boards, etc.). Also, the CAMAC crate is a quite a heavy and noisy unit, that is completely inadequate if only 2-3 CAMAC modules are used in the crate. In order to have portable and simple interface to personal computers, we are developing an interface board that can accommodate up to four CAMAC modules to the USB port. The interface includes a micro controller to handle the trigger signals, CAMAC operations, event formatting and data transfer to the computer. The first version of the interface is limited for two specific modules we have in our laboratory (an Ortec AD811 8x2048 channels ADC and a LeCroy 2228A 8x2048 channels TDC). A small power supply is included in the system, making it quite low weight and portable. Typically it is spent to process each CAMAC read operation and about half this time to dataless operations. More about the performance of this board will be presented. A new interface, capable of handling four CAMAC units is now being planned. The new project will be able to handle virtually any kind of CAMAC module. A CAMAC crate controller based in these boards will also be developed. (author)

  3. Zn(2+) site engineering at the oligomeric interface of the dopamine transporter

    DEFF Research Database (Denmark)

    Norgaard-Nielsen, Kristine; Norregaard, Lene; Hastrup, Hanne

    2002-01-01

    Increasing evidence suggests that Na(+)/Cl(-)-dependent neurotransmitter transporters exist as homo-oligomeric proteins. However, the functional implication of this oligomerization remains unclear. Here we demonstrate the engineering of a Zn(2+) binding site at the predicted dimeric interface...... of the dopamine transporter (DAT) corresponding to the external end of transmembrane segment 6. Upon binding to this site, which involves a histidine inserted in position 310 (V310H) and the endogenous Cys306 within the same DAT molecule, Zn(2+) potently inhibits [(3)H]dopamine uptake. These data provide indirect...... evidence that conformational changes critical for the translocation process may occur at the interface between two transporter molecules in the oligomeric structure....

  4. Zn(2+) site engineering at the oligomeric interface of the dopamine transporter.

    Science.gov (United States)

    Norgaard-Nielsen, Kristine; Norregaard, Lene; Hastrup, Hanne; Javitch, Jonathan A; Gether, Ulrik

    2002-07-31

    Increasing evidence suggests that Na(+)/Cl(-)-dependent neurotransmitter transporters exist as homo-oligomeric proteins. However, the functional implication of this oligomerization remains unclear. Here we demonstrate the engineering of a Zn(2+) binding site at the predicted dimeric interface of the dopamine transporter (DAT) corresponding to the external end of transmembrane segment 6. Upon binding to this site, which involves a histidine inserted in position 310 (V310H) and the endogenous Cys306 within the same DAT molecule, Zn(2+) potently inhibits [(3)H]dopamine uptake. These data provide indirect evidence that conformational changes critical for the translocation process may occur at the interface between two transporter molecules in the oligomeric structure.

  5. High speed UNIBUS-VME interface

    International Nuclear Information System (INIS)

    Olmos, P.

    1987-01-01

    An interface between VME an the UNIBUS of PDP or VAX computer is presented. The system supports high speed parallel communication (up to 1MB/S) and is composed of two modules. One of these is a commercial DR11M board which performs DMA transfers between UNIBUS and the external word. The other is a VME module specifically developed for this application. The interface has been tested under VMS operating system in VAX and VALET-PLUS system for the VME Bus. We describe in detail the VME module and its connection with the DR11M. Software, both in WMS and VALET, is also described. (Author) 7 refs

  6. Liferay 6.2 user interface development

    CERN Document Server

    Chen, Xinsheng

    2013-01-01

    A step-by-step tutorial, targeting the Liferay 6.2 version. This book takes a step-by-step approach to customizing the look and feel of your website, and shows you how to build a great looking user interface as well.""Liferay 6.2 User Interface Development"" is for anyone who is interested in the Liferay Portal. It contains text that explicitly introduces you to the Liferay Portal. You will benefit most from this book if you have Java programming experience and have coded servlets or JavaServer Pages before. Experienced Liferay portal developers will also find this book useful because it expla

  7. Marketing-sales interface and organizational competitiveness

    OpenAIRE

    George J. Avlonitis; Konstantinos Lionakis

    2015-01-01

    This paper focuses on the effectiveness of marketing-sales interfaces in B2B firms. As the body of knowledge on this domain is scarce, there is a greater need to investigate the specific aspects of marketing-sales configurations in such firms. The objective of this paper is to expand existing knowledge regarding marketing-sales interfaces in B2B firms, in order to identify the effectiveness of each configuration. Based on quantitative data collected from marketing or sales managers of 98 B2B ...

  8. Interface definitions in literature: A reality check

    DEFF Research Database (Denmark)

    Parslov, Jakob Filippson; Mortensen, Niels Henrik

    2015-01-01

    Companies that develop multi-technological products are challenged on their ability to obtain high product quality and short development lead times in today’s highly competitive and globalized markets. One of the main reasons for poor product quality is due to unidentified or poorly defined product...... on the definition and perception of a product interface within engineering design research which is the objective of this article. A structured literature review of interface definitions found within engineering design literature has been carried out. The different definitions were tabulated against four key issues...

  9. Multibody dynamics model building using graphical interfaces

    Science.gov (United States)

    Macala, Glenn A.

    1989-01-01

    In recent years, the extremely laborious task of manually deriving equations of motion for the simulation of multibody spacecraft dynamics has largely been eliminated. Instead, the dynamicist now works with commonly available general purpose dynamics simulation programs which generate the equations of motion either explicitly or implicitly via computer codes. The user interface to these programs has predominantly been via input data files, each with its own required format and peculiarities, causing errors and frustrations during program setup. Recent progress in a more natural method of data input for dynamics programs: the graphical interface, is described.

  10. Magnetic structure of the spin valve interface

    International Nuclear Information System (INIS)

    Nicholson, D.M.C.; Butler, W.H.; Zhang, X.; MacLaren, J.M.; Gurney, B.A.; Speriosu, V.S.

    1994-01-01

    Nonferromagnetic atoms present at Ni/Cu and Permalloy/Cu interfaces in sputtered spin valve magnetoresistive layered structures have been shown to cause reduced magnetoresistance. Here we show that a model in which the moments on the Ni atoms in the interfacial region of Ni/Cu are reduced substantially by interdiffusion with Cu is consistent with the experimental results. In contrast, we believe that moments persist at the permalloy/Cu interface, which first principle total energy calculations suggest will be disordered at finite temperatures. These reduced or disordered moments are expected to significantly reduce the GMR

  11. Interface For Fault-Tolerant Control System

    Science.gov (United States)

    Shaver, Charles; Williamson, Michael

    1989-01-01

    Interface unit and controller emulator developed for research on electronic helicopter-flight-control systems equipped with artificial intelligence. Interface unit interrupt-driven system designed to link microprocessor-based, quadruply-redundant, asynchronous, ultra-reliable, fault-tolerant control system (controller) with electronic servocontrol unit that controls set of hydraulic actuators. Receives digital feedforward messages from, and transmits digital feedback messages to, controller through differential signal lines or fiber-optic cables (thus far only differential signal lines have been used). Analog signals transmitted to and from servocontrol unit via coaxial cables.

  12. Sigma Web Interface For Reactor Data Applications

    International Nuclear Information System (INIS)

    Pritychenko, B.; Sonzogni, A.A.

    2010-01-01

    We present Sigma Web interface which provides user-friendly access for online analysis and plotting of the evaluated and experimental nuclear reaction data stored in the ENDF-6 and EXFOR formats. The interface includes advanced browsing and search capabilities, interactive plots of cross sections, angular distributions and spectra, nubars, comparisons between evaluated and experimental data, computations for cross section data sets, pre-calculated integral quantities, neutron cross section uncertainties plots and visualization of covariance matrices. Sigma is publicly available at the National Nuclear Data Center website at http://www.nndc.bnl.gov/sigma.

  13. Interdisciplinarity at the Human-Environment Interface

    DEFF Research Database (Denmark)

    Rasmussen, Kjeld; Arler, Finn

    2010-01-01

    Current environmental problems increasingly call for research - as well as education - which crosses the traditional divides between well-established scientific disciplines and between natural science, technical sciences, social sciences and the humanities. This paper addresses the issue of what...... discussed, including Geography, Human Ecology, Environmental Studies, Environmental Management, Ecological Economics, Sustainability Science and Earth System Science. Key problems of carrying out interdisciplinary research are identified, including differences of both ontological, epistemological...... interdisciplinarity, at the interface between the natural and human sciences, entails and the theoretical problems and obstacles interdisciplinarity encounters. A number of attempts to institutionalize interdisciplinarity, at the Human-Environment interface, in 'fields of study' or even 'disciplines', are briefly...

  14. Principles of interfacing computers to medical equipment.

    Science.gov (United States)

    Francis, J L; Martin, T R

    1990-12-01

    Table 3 shows a comparison of the interface standards considered. RS232 has the advantages of availability, flexibility and low cost. Variants on the standard overcome its limitations in data-rate and distance. The Centronics parallel standard is available on most personal computers and is particularly suitable for high data-rates over short distances. Other PC standards such as SCSI are special-purpose interfaces and therefore more difficult to use. GPIB is a robust and well-specified standard often used for the control of laboratory instruments.

  15. On user behaviour adaptation under interface change

    CSIR Research Space (South Africa)

    Rosman, Benjamin S

    2014-02-01

    Full Text Available stream_source_info Rosman2_2014_ABSTRACT ONLY.pdf.txt stream_content_type text/plain stream_size 2213 Content-Encoding UTF-8 stream_name Rosman2_2014_ABSTRACT ONLY.pdf.txt Content-Type text/plain; charset=UTF-8... International Conference on Intelligent User Interfaces, Haifa, Israel, 24-27 February 2014 On User Behaviour Adaptation Under Interface Change Benjamin Rosman_ Subramanian Ramamoorthy M. M. Hassan Mahmud School of Informatics University of Edinburgh...

  16. Interface Fracture in Adhesively Bonded Shell Structures

    DEFF Research Database (Denmark)

    Jensen, Henrik Myhre

    2007-01-01

    Two methods for the prediction of crack propagation through the interface of adhesively bonded shells are discussed. One is based on a fracture mechanics approach; the other is based on a cohesive zone approach. Attention is focussed on predicting the shape of the crack front and the critical...... to take into account effects such as plastic deformation in the adhering shells, and to take into account effects of large local curvatures of the interface crack front. The comparison shows a convergence of the results based on the cohesive zone model towards the results based on a fracture mechanics...

  17. SIGMA WEB INTERFACE FOR REACTOR DATA APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Pritychenko,B.; Sonzogni, A.A.

    2010-05-09

    We present Sigma Web interface which provides user-friendly access for online analysis and plotting of the evaluated and experimental nuclear reaction data stored in the ENDF-6 and EXFOR formats. The interface includes advanced browsing and search capabilities, interactive plots of cross sections, angular distributions and spectra, nubars, comparisons between evaluated and experimental data, computations for cross section data sets, pre-calculated integral quantities, neutron cross section uncertainties plots and visualization of covariance matrices. Sigma is publicly available at the National Nuclear Data Center website at http://www.nndc.bnl.gov/sigma.

  18. High resolution interface nanochemistry and structure

    International Nuclear Information System (INIS)

    1993-01-01

    A summary is given of results on nanospectroscopy etc. during the previous three years, divided into the following subsections: development of methods and instrumentation for interface/boundary chemical analysis, interface and boundary structure in ceramic matrix composites, quantitative composition measurements of thin films and inclusions, theoretical calculations for electron energy loss near edge fine structure and grain boundary structure, and small probe radiation effects in ceramics. Materials studied include SiC whisker-reinforced Si3N4, SiC, Si oxides, Si, Si oxynitride, other ceramics. Methods mentioned include field emission, EELS (electron energy loss spectroscopy), nanospectroscopy, electron nanoprobe, etc

  19. Photovoltaics module interface: General purpose primers

    Science.gov (United States)

    Boerio, J.

    1985-01-01

    The interfacial chemistry established between ethylene vinyl acetate (EVA) and the aluminized back surface of commercial solar cells was observed experimentally. The technique employed is called Fourier Transform Infrared (FTIR) spectroscopy, with the infrared signal being reflected back from the aluminum surface through the EVA film. Reflection infrared (IR) spectra are given and attention is drawn to the specific IR peak at 1080/cm which forms on hydrolytic aging of the EVA/aluminum system. With this fundamental finding, and the workable experimental techniques, candidate silane coupling agents are employed at the interface, and their effects on eliminating or slowing hydrolytic aging of the EVA/aluminum interface are monitored.

  20. Interdisciplinarity at the Human-Environment Interface

    DEFF Research Database (Denmark)

    Rasmussen, Kjeld; Arler, Finn

    2010-01-01

    Current environmental problems increasingly call for research - as well as education - which crosses the traditional divides between well-established scientific disciplines and between natural science, technical sciences, social sciences and the humanities. This paper addresses the issue of what...... interdisciplinarity, at the interface between the natural and human sciences, entails and the theoretical problems and obstacles interdisciplinarity encounters. A number of attempts to institutionalize interdisciplinarity, at the Human-Environment interface, in 'fields of study' or even 'disciplines', are briefly...... discussed, including Geography, Human Ecology, Environmental Studies, Environmental Management, Ecological Economics, Sustainability Science and Earth System Science. Key problems of carrying out interdisciplinary research are identified, including differences of both ontological, epistemological...