from WorldWideScience.org

1

VALIDATION OF THE DJOSER ANALYTICAL THERMAL SIMULATOR FOR ...

de PE Bagnoli - 2006 - Cité 6 fois - Autres articlesthe conductive thermal resistance of the whole structure tents to increase and the temperature ..... layers and of their thermal boundary conditions. This ...

2

Two-Dimensional Temperature Fields in ASICs for Multiple Heat ...

As one moves along the boundary of the polygon counter clockwise, .... (9) With these conversions it is guaranteed that the thermal resistance for each ...

3

de A CHAISE - 2007 - Autres articlesBoundary conditions and some thermal data are taken from experimental results. .... expérience, une valeur de résistance de paroi est également extraite. ...

4

TRANSIENT THERMAL SIMULATION OF A POWER HYBRID MODULE USING AN ...

de M Janicki - 2006of the thermal analysis. The boundary conditions describe ..... were the thermal contact resistance and the heat transfer coefficient value at the bottom of ...

5

TRANSIENT THERMAL ANALYSIS OF POWER LEDS AT PACKAGE & BOARD LEVEL ...

de JH Yu - 2006 - Autres articlesat highly repeatable boundary condition, i.e. we analyse a thermal self-impedance. .... tions of the board thermal resistance in Fig. 10. The rela- ...

6

THERMOS3, A TOOL FOR 3D ELECTROTHERMAL SIMULATION OF SMART POWER ...

de G Buonaiuto - 2006 - Cité 1 fois - Autres articlesthe cupper traces of a PCB in FR4. With this boundary condition the die size reduction does not affect significantly the thermal resistance junction ambient ...

7

THERMAL MEASUREMENT AND MODELING OF MULTI-DIE PACKAGES András ...

de A Poppe - 2006 - Cité 1 fois - Autres articlesmeasuring and reporting a full thermal resistance matrix. [7], [8] or thermal impedance matrix .... die transient package models creation of boundary condi- ...

8

THERMAL DESIGN OF POWER SEMICONDUCTOR MODULES FOR MOBILE ...

de Y Osone - 2006 - Cité 1 fois - Autres articlesvarious design factors on the thermal resistance of the module. We found that the thickness .... that the isothermal boundary in the thermal design of the ...

9

THERMAL AND SENSITIVITY ANALYSIS OF MULTI-FIN DEVICES Brian Swahn ...

Adiabatic boundary conditions are applied to all other surfaces, resulting in ... Similarly, we use Rox top to represent the thermal resistance between the ...

10

Study of Water Speed Sensitivity in a Multifunctional Thick-film ...

de F Stefani - 2007 - Autres articlesrange of thermal boundary conditions and electrical bias and to .... possible, this layer inserts a thermal resistance between the resistor and the liquid, ...

11

Structure and properties of nanoparticles formed under conditions ...

de YS Kwon - 2006 - Autres articles... have shown that there are no grain boundaries and severe changes in the ... oxidation resistance at normal temperatures, processes passing at ... In case of the bad thermal conductivity, these processes occur under conditions of a ...

12

Structure Function Representation of Multi-Directional Heat-Flows ...

In this case, the cumulative resistance and capacitance of the RC transmission line are ..... On the rest of the boundary @ the thermal ux is set to zero. ...

13

Structure Function Representation of Multi-Directional Heat-Flows

de L Codecasa - 2006 - Cité 4 fois - Autres articlesand capacitance of the RC transmission line are ex- actly the cumulative thermal resistance and capaci- tance from the boundary at which power is injected. ...

14

Stresa, Italy, 25-27 April 2007 SURFACE GENERATION ANALYSIS IN ...

de J Wang - 2007 - Cité 8 fois - Autres articlesthermal conductivity. So the workpiece material is regarded as isotropic, and the surface ... in the grain boundary. So the deform resistance of the ...

15

Stresa, Italy, 25-27 April 2007 SURFACE GENERATION ANALYSIS IN ...

The chip is often discontinues because of the grain boundary effect. ... such as the hardness, tensile strength, elastic module and thermal conductivity. ... So the deform resistance of the grain boundary is bigger, and it is not easy ...

16

Stresa, Italy, 25-27 April 2007 SET-UP AND CHARACTERIZATION OF A ...

de W Smetana - 2007 - Autres articlesdifference of thermal conductivity between water vapor and air. .... characteristic of the sensor for two different boundary .... and high positive temperature coefficient of resistance. (TCR) of 0.28%/K. ...

17

Stresa, Italy, 25-27 April 2007 SET-UP AND CHARACTERIZATION OF A ...

HUMIDITY SENSOR SET-UP Figure 1 shows the model of the proposed thermal ... lateral dimension: 2 mm x 2 mm, nominal resistance at 293 K: 6 Ohm, ... the sensor for two different boundary conditions concerning heat dissipation at the cap: ...

18

Stresa, Italy, 25-27 April 2007 OUT-OF-PLANE CMOS COMPATIBLE ...

The thermal power noise spectral density for a resistance R and a ... the thermal dissipation by joule effect, air damping and Boundaries conditions. ...

19

Stresa, Italy, 25-27 April 2007 MICROMACHINED POLYCRYSTALLINE SIGE ...

The thermal resistance can be determined from FEM simulation. As boundary conditions, a known heat flow is forced into the bottom surface and a fixed ...

20

Stresa, Italy, 25-27 April 2007 EVALUATION OF THE THERMAL AND ...

... boundary layer approximations and constant density laminar flow. m&? is the ... The Figure 8 shows the effective thermal resistance values for several ... For each working temperature, the thermal resistance decreases until the ...

21

Stresa, Italy, 25-27 April 2007 DESIGN AND MODELING OF ...

Due to a higher thermal resistance and operation at high temperatures, .... according to the application requirement, the fixed thermal boundary is defined ...

22

Stresa, Italy, 25-27 April 2007 - - MICROCANTILEVER-BASED WEATHER ...

The temperature measurement is based on the linear resistance variations ... DESIGN 2.1 Cantilever deflection induced by thermal stress ? ... Under these boundary conditions, the constants 1C and 2C must therefore also be equal to zero. ...

23

SMOKE AND CFD VISUALIZATION OF THE FLOW AFTER AN EMC SCREEN IN A ...

Nowadays, thermal management engineers use Computational Fluid Dynamics (CFD) as a ... by means of a hydraulic volume or surface resistance as in Nevelsteen [8], .... Symmetry boundary condition Back walls Bottom wall Pressure Outlet ...

24

25

Prise en compte des contraintes résiduelles dans un critère de ...

de C HENNINGER - 2007posée de la fissure doit dépasser une valeur critique : la résistance en traction σc .... Williams M. L. 1952 Stress singularities resulting from various boundary ... Yosibash Z. 1998 Thermal generalized stress intensity factors in 2-D ...

26

Preparation of Papers in Two-Column Format for the Proceedings of ...

de J Hu - 2007 - Autres articles

27

PREPARATION AND CHARACTERIZATION OF CERAMICS LASER ALLOYED WITH ...

de S Schreck - 2007 - Autres articlesof the good thermal shock resistance of the LTCC substrates (thickness 1mm) the preheating .... a reaction phase could be detected at the grain boundaries ...

28

OUT-OF-PLANE CMOS COMPATIBLE MAGNETOMETERS

de M El Ghorba - 2007 - Autres articlesThe thermal power noise spectral density for a resistance R and a mechanical damping D at ... effect, air damping and Boundaries conditions. This ...

29

Nice, Côte d?Azur, France, 27-29 September 2006 QUANTITATIVE 3 ...

The thermal resistance between the tip and the sample (ii) is due to ... where and The constants c1,c2,c3 and c4 are obtained from the boundary conditions. ...

30

Nice, Côte d'Azur, France, 27-29 September 2006 ©TIMA Editions ...

Compounding the problem is the fact that the cost of an IC's thermal ... where each layer's thermal resistance must be found analytically or experimentally [6]. .... G. Wachutka, “Boundary Independent Exact Thermal Model for Electronic ...

31

Nice, Côte d'Azur, France, 27-29 September 2006 ©TIMA Editions ...

We calculated the thermal resistance between the HBT fingers and the bottom ... boundary in the thermal design of the semiconductors in the cell phone. ...

32

Nice, Côte d'Azur, France, 27-29 September 2006 ©TIMA Editions ...

It is also necessary to know the boundary thermal resistance between the layers as well as the thermophysi- cal properties of each layer. ...

33

Nice, Côte d'Azur, France, 27-29 September 2006 ©TIMA Editions ...

Because of the adiabatic boundary conditions on the top and lateral sides, .... Furthermore the bottom specific thermal resistance Rp was set to 0.5 mm2°C/W ...

34

Nice, Côte d'Azur, France, 27-29 September 2006 ©TIMA Editions ...

When boundary condition independence of the CTM is not required or there exists only ... In case of conventional devices the thermal resistance (or thermal ...

35

Nice, Côte d'Azur, France, 27-29 September 2006 ©TIMA Editions ...

In this domain, Delphi project has achieved Boundary Conditions Independent ... Figure-3-a illustrates the changes of the thermal resistance Rtop versus the ...

36

Nice, Côte d'Azur, France, 27-29 September 2006 CHARACTERIZATION ...

The observed behavior is known as a boundary effect in the interface between e.g. ..... The determination of thermal interface resistance and thermal ...

37

Microcantilever-based Weather Station for Temperature, Humidity ...

de CY Lee - 2007 - Autres articlesmeasurement is based on the linear resistance variations when temperature changes. The polyimide layer is spun ... when the microcantilever is subjected to thermal loading ... Under these boundary conditions, the constants 1 ...

38

Micro-Hotplates for Thermal Characterisation of Structural ...

de P Furjes - 2007 - Cité 2 fois - Autres articles

39

MINIMIZING THE BONDLINE THERMAL RESISTANCE IN THERMAL INTERFACE ...

At lower plate separations and speeds a boundary between the two regimes is seen on a ... The bondline thermal resistance and bondline thickness is shown in ...

40

Lumped and Distributed Parameter SPICE Models of TE Devices ...

de J Salazar - 2007 - Autres articlesobserved through the corresponding thermal resistance,. Rth = K. -1. In the electrical port, ... mixed boundary conditions are required (temperature and ...

41

Lumped Electro-Thermal Model of On-chip Interconnects Nadia ...

It is worthwhile observing here that the R0Ek electrical resistance ... through external thermal resistors that are deduced from the boundary exchange conditions. ... For what concerns the oxide thermal resistance it can be written as ...

42

INVERSE THERMAL PROBLEM VIA MODEL ORDER REDUCTION: DETERMINING ...

de T Bechtold - 2006 - Cité 2 fois - Autres articlession of both out-of-plane thermal conduction and convec- tion from the membrane's surface. Model contains 4402 nodes and Dirichlet boundary conditions ...

43

INVERSE THERMAL PROBLEM VIA MODEL ORDER REDUCTION: DETERMINING ...

The electrical resistance depends linearly on the temperature over the ... Model contains 4402 nodes and Dirichlet boundary conditions are set at the outer ...

44

Flexible Micro Thermoelectric Generator based on Electroplated Bi2Te3

de E Schwyter - 2008 - Cité 1 fois - Autres articlesdepending on the thermal interface resistance K, the TC length and the ratio of insulating ... boundaries by adjusting the deposition speed, and reduce the ...

45

Evaluation of the thermal and hydraulic performances of - I-Revues

de S Tzanova - 2007 - Autres articles(fluid velocity equals zero in z direction), boundary ... temperature, the thermal resistance decreases until the value of the input power of 17-18W. ...

46

Evaluation of the impact of solder die attach versus epoxy die ...

de J Czernohorsky - 2007 - Autres articlesThus the resulting thermal resistance of the solder die attach is about factor 3.5 smaller than the .... boundary conditions on the interface between ...

47

Evaluation of the impact of solder die attach versus epoxy die ...

Thus the resulting thermal resistance of the solder die attach is about factor 3.5 ... Reference point for adjustment of boundary conditions Die Die attach ...

48

ENS?07 Paris, France, 3-4 December 2007 PREPARATION AND ...

C. Because of the good thermal shock resistance of the LTCC substrates .... The lateral size of the grain boundary phase varied between 100 to 500 nm. ...

49

ENS'06 Paris, France, 14-15 December 2006 ©TIMA Editions/ENS 2006 ...

Here l is the electron mean free path in the wire and LT is the thermal ... 1.a) Sketch of the biepitaxial grain boundary structure for three ... The normal state resistance RN can be reliably estimated between 10 mV and 15 mV. ...

50

ELECTRONICS WARMING AND OPTIMIZATION STUDY SUBJECT TO LOW ...

de K Khalkhali - 2006boundary conditions have to be taken into account. The first one ... the thermal resistance requires geometrical changes, which can ...

51

ELECTRONICS WARMING AND OPTIMIZATION STUDY SUBJECT TO - I-Revues

Of course, the less thermal resistance exists between the heater and the PCB ... C1, C2, and C3 are defined by the initial and boundary conditions of the ...

52

Dynamic Electrothermal Simulation of Integrated Resistors at ...

de B Vermeersch - 2007 - Cité 1 fois - Autres articles(9) is needed because of the adiabatic boundary condition. ... simply an extension of the well known thermal resistance Rth to dynamic phenomena. ...

53

Dynamic Compact Thermal Model with Neural Networks for Radar ...

de G Mallet - 2006 - Cité 1 fois - Autres articlessummarized by its thermal resistance Rth and its thermal capacitance Cth. ... To identify thermal resistances, the static response for a fixed boundary ...

54

Dynamic Compact Thermal Model with Neural Networks for Radar ...

... block of material can be summarized by its thermal resistance Rth and its thermal .... For the RC network, the neural network output is just a boundary ...

55

Determination of Thermophysical Properties of Si/SiGe ...

de Y Ezzahri - 2005 - Cité 2 fois - Autres articlesallows the determination of the SL cross-plan thermal conductivity, the thermal boundary resistance at the interface between the metallic film and the SL, ...

56

DESIGN ISSUES OF A VARIABLE THERMAL RESISTANCE Székely V., Mez si ...

de G Mezosi - 2006 - Autres articlesthermal resistance (VTR). By using such tools at the boundaries of the package, measurement for a number of different boundary conditions become possible in ...

57

Combination of Thermal Subsystems Modeled by Rapid Circuit ...

de W Kiffe - 2007 - Autres articlesnotion of “compact” thermal model usually implies boundary ..... ture (or the thermal resistance of the radiator) is known: The ...

58

Canonical Forms of Multi-Port Dynamic Thermal Networks Lorenzo ...

The resistance matrix of the series connections of the passive resistive ... On the rest of the boundary partialdiffOmega the thermal flux is set to zero. ...

59

Canonical Forms of Multi-Port Dynamic Thermal Networks

de L Codecasa - 2006 - Autres articlesmulti-port of resistance matrix R0 and of a passive capacitive ... the rest of the boundary ∂Ω the thermal flux is set to zero. Ac- ...

60

COHERENT QUASIPARTICLE TRANSPORT IN GRAIN BOUNDARY JUNCTIONS ...

de F Tafuri - 2006 - Cité 1 fois - Autres articlesMagneto-fluctuations of the normal resistance RN have been reproducibly observed in YBa2Cu3O7-d biepitaxial grain boundary junctions at low temperatures. We ...

61

Budapest, Hungary, 17-19 September 2007 Flexible Profile Approach ...

Sep 19, 2007 ... Concerning dependence of the thermal resistance on imposed ... of the thermal boundary layer is a strong function of these profiles. ...

62

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing/THERMINIC ...

If mixed boundary conditions are required (temperature and heat flow at the same or opposite sides ... Electrical resistance, R, and thermal conductance, ...

63

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing/THERMINIC ...

Sep 19, 2007 ... This work is intended to determine the thermal properties of .... First order boundary conditions were applied at the suspension/substrate joints by adjusting 23? ... by an additional thermal resistance and capacitance. ...

64

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing/THERMINIC ...

The notion of ?compact? thermal model usually implies boundary condition ... context can also be modeled as thermal subsystem (layer of thermal resistance). ...

65

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing/THERMINIC ...

Starting with the main set of thermal requirements for the CR the paper will .... corrosion and fatigue resistance, tailorable thermal conductivities, .... Boundary conditions: load: 1.1W equally distributed to the 10 heat power ...

66

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing/THERMINIC ...

Since the sensitivity to water speed is directly related to thermal ... under a wide range of thermal boundary conditions and electrical bias and to .... this layer inserts a thermal resistance between the resistor and the liquid, ...

67

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing/THERMINIC ...

Sep 19, 2007 ... Thermal resistance from the junction to the ambient was decreased from .... For the heat block test, the boundary condition is to apply heat ...

68

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing/THERMINIC ...

in DSF denote material boundaries and the distance on the x-axis between boundaries is the thermal resistance of that material in the system. ...

69

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing - I-Revues

Sep 19, 2007... end of the transient is mainly affected by the thermal boundary conditions. ... The larger die attach thermal resistance obstacles the heat. ... shows a longer horizontal section meaning larger thermal resistance. ...

70

Budapest, Hungary, 17 - 19 September 2007 Dynamic Electrothermal ...

The extra factor 2 in (9) is needed because of the adiabatic boundary condition. ... This is simply an extension of the well known thermal resistance Rth to ...

71

Belgirate, Italy, 28-30 September 2005 VALIDATION OF THE DJOSER ...

However, if a contact thermal resistance is placed at bottom surface of the copper heat .... of all the layers and of their thermal boundary conditions. ...

72

Belgirate, Italy, 28-30 September 2005 TRANSIENT THERMAL ANALYSIS ...

We measured several samples at highly repeatable boundary conditions, ... It is shown that the thermal resistance stabilises at 2.3 K/W for ratios larger ...

73

Belgirate, Italy, 28-30 September 2005 TRANSIENT THERMAL ...

The boundary conditions describe the heat exchange with the surrounding ..... to be found directly from the measurements were the thermal contact resistance ...

74

Belgirate, Italy, 28-30 September 2005 THERMAL MODELING OF POWER ...

4.a) and the boundary conditions (fig. 4.b). Where R hea-IGBT1 (K/W) represents the thermal resistance between the case, just below the component under test ...

75

Belgirate, Italy, 28-30 September 2005 MECHANISM AND THERMAL ...

Increase of thermal resistance with the degree of delamination was observed ... For the heat block test, the boundary condition is to apply heat transfer ...

76

Belgirate, Italy, 28-30 September 2005 FLEXIBLE PROFILE COMPACT ...

Egypte ABSTRACT Recent advances in Compact Thermal Models (CTM) have led to the ... This constitutes the basis of the Boundary and Initial Conditions ... The former, resistance network, can always be rewritten in the form of a matrix. ...

77

Belgirate, Italy, 28-30 September 2005 ELECTRO-THERMAL-MECHANICAL ...

Boundary conditions are different temperature at both ends of the wire and a .... Influence of die attach Thermal resistance R th (K/W) of the package is ...

78

Belgirate, Italy, 28-30 September 2005 An Integrated Experimental ...

Next, the thermal conductivity of each thin-film layer composing the device .... 300 GaAs Die Attach Substrate Fixed temperature boundary condition at base .... of thermal conductivity and interface resistance of metallized natural and ...

79

Belgirate, Italy, 28-30 September 2005 ANALYTICAL THERMAL STRESS ...

Unknown Reliability Engineer ABSTRACT Some basic thermal stress and thermal .... for structures with complicated geometry and/or with complicated boundary conditions, ...... E. Suhir, "Electronic Assembly Having Improved Resistance to ...

80

Belgirate, Italy, 28-30 September 2005

de E Suhir - 2006 - Cité 5 fois - Autres articlesThermal loading takes place during the normal operation of the system, as well as during its fabrication, ..... requirement for the undistorted boundaries of the inner ..... Resistance to Delamination", U.S. Patent. #6028772, 2000 ...

81

de J Das - 2006 - Autres articlesAlN carrier (T = 25 °C) is defined as a boundary condition. The thermal conductivities of the ... source resistance and the change of threshold voltage ...

82

de PO Chapuis - 2006 - Autres articlescoupling and (ii) the thermal resistance between tip and sample. We previously showed that the ... boundary conditions. The symmetry of the problem allows ...

83

de MN Sabry - 2006 - Autres articlesgeneration term, λ is the thermal conductivity and r the coordinate. Equation (2.1a) describes the relation between ... values selected from boundary conditions (2.1b) provided ... The former, resistance network, can always be ...

84

de LC Chen - 2006 - Autres articlesFilling in the boundary conditions, where we assume that the local temperature distribution on .... Thermal resistance Rth(K/W) of the package is calculated ...

85

de J Hu - 2006 - Cité 20 fois - Autres articlesthermal resistance with the degree of delamination was observed from the transient measurement .... boundary condition is W=1, for the external surfaces of ...

86

de S Abid - 2006In figure 5 we have shown the effect of the boundary conditions, at the module base plate, on the effective thermal resistance of each device. ...

87

de TDUM Henri - 2011 - Autres articlesThis study focus on Grain Boundary Engineering (GBE) applied to microstructure ... CSL probability distribution evolutions is given as a function of thermal and ... polycristallin consiste à optimiser la résistance des joints de grains. ...

88

An Integrated Experimental and Computational System for the ...

de PE Raad - 2006 - Cité 3 fois - Autres articlesFixed temperature boundary condition at base of substrate. Surface metal .... measurements of thermal conductivity and interface resistance of metallized ...

89

Advancement of Multifunctional support structure technologies (AMFSST)

de R John - 2007 - Autres articlesstiffness, corrosion and fatigue resistance, tailorable thermal conductivities, controlled thermal .... Boundary conditions: load: 1.1W equally distributed ...

90

AN EXTENDABLE MULTI-PURPOSE SIMULATION AND OPTIMIZATION FRAMEWORK ...

de S Holzer - 2006 - Autres articleslarge scale pn-junction with different thermal boundary conditions at each side of the junction. ... the necessary load resistance for power match in the ...

91

AN EXTENDABLE MULTI-PURPOSE SIMULATION AND OPTIMIZATION FRAMEWORK ...

To provide the appropriate capabilities for problems related to thermal coupled .... with diŽerent thermal boundary conditions at each side of the junction. ... the necessary load resistance for power match in the Stefan Holzer et al. ...

92

ADVANCED COMPACT THERMAL MODELING USING VHDL-AMS Wasim HABRA ...

de W HABRA - 2006 - Cité 8 fois - Autres articlesaccording to the applied boundary conditions. )1(. P. TT. R x x j xth. −. = −. Where: -Rth is the thermal resistance (k°/W). ...

93

A TEMPERATURE ANALYSIS OF HIGH-POWER ALGAN/GAN HEMTS Jo Das1 ...

Since thermal management is extremely important for these high power ... at the backside of the AlN carrier (T = 25 °C) is defined as a boundary condition. ... VT represent the change of source resistance and the change of threshold ...

94

A New Methodology for Extraction of Dynamic Compact Thermal Models

de W Habra - 2007 - Cité 1 fois - Autres articlescoupling between heat sources in Boundary Condition. Independent (BCI) static CTM [2]. .... The thermal resistance values of the static model are kept. ...

95

?EDA Publishing/DTIP 2008 ISBN: 978-2-35500-006-5 Low-Drift Flow ...

A thermal flow sensor has been realised consisting of freely-suspended ... eliminating inevitable influences of resistance drift and mismatch of the thin-film ... Ambient temperature is imposed as a boundary condition at a radius of 450 ...

96

9-11 April 2008 Substrate Ground Shield Reflector Reflector Input ...

The thermal analysis of a polysilicon heater can be divided into two stages. ... constants were obtained by applying the following boundary conditions: the ends of ... Temperature-resistance calibration was performed using temperature ...

97

9-11 April 2008 ?EDA Publishing/DTIP 2008 ISBN: 978-2-35500-006-5 ...

As thermal boundary conditions, necessary to be set for simulations, ... The heating resistance and the pads were of thin Cr /Au layer. ...

98

9-11 April 2008 ?EDA Publishing/DTIP 2008 ISBN: 978-2-35500-006-5 ...

The same calculation has been done for mineral oil SAE50 and for a temperature rise of the heater resistance equal to 140 ?C. The thermal boundary layer is ...

99

9-11 April 2008 ?EDA Publishing/DTIP 2008 ISBN: 978-2-35500-006-5 ...

TEGs) based on the Seebeck effect convert thermal energy, represented by heat flow (Q ... for a low internal resistance of the generator and a high thermal resistance in .... reduce grain boundaries by adjusting the deposition speed, ...

100

1 Determination of Thermophysical Properties of Si/SiGe ...

In particular, this technique allows the determination of the SL cross-plan thermal conductivity, the thermal boundary resistance at the interface between ...