Sample records for OUTILS DE COUPE (cutting tools)
from WorldWideScience.org

Sample records 1 - 20 shown. Select sample records:



1

Suivi de l'usure des outils de coupe en tournage `a sec de la ...


to follow the wear of the cutting tools. This vibratory analysis aims at ... state of the machining system and the state of wear of the cutting tool during ...

IRevues (France)

2

ÉTUDE EXPERIMENTALE DE LA COUPE EN FRAISAGE


de G ALBERT - 2007 - Cité 1 fois - Autres articles[ Lee et al, 1996 ] : P. Lee, Y. Altintas, “Prediction of ball-end milling forces from orthogonal cutting data”, International. Journal of Machine Tools ...

IRevues (France)

3

tests-genetiques_expertauteur.p.PDF


... Salpêtrière, Paris Benoît DERVAUX, Labores/Cresge (Laboratoire de recherches économiques et sociales/Centre de recherches économiques, sociologiques et ... d'études et de recherche en droit social, Université de Lille 2, Lille Jean-Paul GAUDILLIERE, Cermes (Centre de recherche médecine, sciences, santé et ...

Institut National de la Sante et de la Recherche Medicale (French)

4

couv-autopsie_psychologique.indd


... Direction générale de la santé (DGS) concernant l'autopsie psychologique, sa mise en oeuvre et les démarches associées. Il constitue un prolongement et ... et pré-requis de l'autopsie médicolégale : aspects pratiques et juridiques.......................................................... 7 3. Principes et ...

Institut National de la Sante et de la Recherche Medicale (French)

5

cfm07 final


de X SOLDANI - 2007 - Autres articlesTools Manufact. 45, 166-180. Moufki A., Molinari A. et Dudzinski D., (1998) Modelling of orthogonal cutting with a temperature dependant friction law. ...

IRevues (France)

6

Untitled


These tools are doubly powerful in that they stimulate the imagination, ...... Another theory is that globalization has induced massive cost cutting in the ...

IRevues (France)

7

Untitled


more reliable tools for anticipation, and the build-up of a cre;dible body .... becoming mean and lean, more efficient and effective, cutting costs, ...

IRevues (France)

8

Untitled


and tools developed for the temperate zone to the largely unim- proved crops and animals of the tropics which support half of mankind; and by cutting waste, ...

IRevues (France)

9

Untitled


The article by Theodore Jay Gordon introduces tools for exploring the ...... price of dramatically cutting down on fossil fuel use is so large, in his esti- ...

IRevues (France)

11

Technological Forecasting and Social Change An International - I ...


... networks cutting across different industries, sectors, and economies. ...... The development of analytical tools and techniques is closely related to ...

IRevues (France)

12

THERMAL STRESS FAILURES: A NEW EXPERIMENTAL APPROACH FOR ...


Reliable experimental tools are therefore required for detection of risks related ... in order to analyze real components without any obligation of cutting, ...

IRevues (France)

13

THERMAL STRESS FAILURES: A NEW EXPERIMENTAL APPROACH FOR ...


de M Hertl - 2006 - Autres articlesA new experimental tool for analyzing the topography and ... obligation of cutting, drilling, or mechanically deforming them; ...

IRevues (France)

14

Stresa, Italy, 25-27 April 2007 SURFACE GENERATION ANALYSIS IN ...


SURFACE GENERATION PROCESS Compared to the conventional milling, the size of the tool and the cutting parameters in micro end-milling shrink to micrometer ...

IRevues (France)

15

Stresa, Italy, 25-27 April 2007 SURFACE GENERATION ANALYSIS IN ...


de J Wang - 2007 - Cité 7 fois - Autres articles3. SURFACE GENERATION PROCESS. Compared to the conventional milling, the size of the tool and the cutting parameters in micro end-milling shrink to ...

IRevues (France)

16

Simulation temporelle du fraisage de parois minces


de A LARUE - 2007 - Autres articlesthe final selection of correct cutting conditions, is proposed. This method is based on the calculation of ..... J. of Machine Tools and Manuf., 45, 769-781 ...

IRevues (France)

18

Report WP8 ASPECTS OF DEVIANCE, CRIME AND PREVENTION IN EUROPE


had just finished cutting the lawn in the back garden and was about to cut the grass in ...... much wider range of tools than just legal instruments; and ...

IRevues (France)

19

Report WP8 - Aspects of deviance, crime and prevention in Europe


I had just finished cutting the lawn in the back garden and was about to cut the ...... For all that, the tools of analysis pertaining to the sociology of ...

IRevues (France)

20

RESUMES -


of content and tools has boosted the dissemination of "bottom-up .... In a sector where cross-cutting innovation predominates, Belle de Mai has had ...

IRevues (France)

21

Prédiction de l'Usure des Outils en Usinage Grande Vitesse


de L Gautier - 2011[2] Dolinšek, Šuštaršic B., Kopac J., Wear mechanisms of cutting tools in high-speed cutting processes,. Wear, 250, 349-356, 2001 ...

IRevues (France)

22

Production And Application Advanced W-based Nanopowders


de K Vasilyeva - 2007 - Autres articlescryogenics, machine tools, racing engines, cutting tools, die casting, small arms. Because it works in high vacuum and wide temperature interval is ...

IRevues (France)

23

PageDeb-transplantation.indd


V Groupe d'experts et auteurs Monique BERNARD, Centre de résonance magnétique biologique et médicale (CRMBM), CNRS UMR 6612, Université de la Méditerranée, ... et de recherche en transplantation (ITERT), Inserm UMR-S 643, Université de Nantes, Nantes François DURAND, Service d'hépatologie et Unité de réanimation ...

Institut National de la Sante et de la Recherche Medicale (French)

24

PageDeb-SantÃ(C) Enfants.indd


... l'enfant est solidement ancrée en France. Elle est associée à la généralisation du carnet de santé, à la mise en place de la protection maternelle et infantile ... Il s'appuie sur les données et les recommandations issues de plusieurs exper- tises collectives publiées entre 2002 et 2007 et qui concernent ...

Institut National de la Sante et de la Recherche Medicale (French)

25

On the use of higher-order statistical tests in the analysis of ...


Higher-order spectra are quite natural tools to analyse the non- ...... with Pfa < 0.05, may be due to the fact that by cutting the time ...

IRevues (France)

26

No Job Name


... et partenariat scientifique (Daps) pour l'instruction du dossier et avec le service de documentation du Département de l'information scientifique et de ... et partenariat scienti- fique (Daps) pour l'instruction du dossier et avec le service de documentation du Département de l'information scientifique et ...

Institut National de la Sante et de la Recherche Medicale (French)

27

Modélisation et simulation des efforts de coupe en fraisage 2.5 axes


de Z BOUAZIZ - 2007 - Autres articlesPart I: Cutting forces, structural deformations aand tolerance integrity ». International Journal of Machine Tools & Manufacture 46 (2006). 1478-1488. ...

IRevues (France)

28

Modélisation analytique des efforts en usinage


de P NAISSON - 2011residual stresses induced in orthogonal cutting of aisi 316l steel. International Journal of Machine. Tools and Manufacture, 46(14):1786–1794, novembre 2006 ...

IRevues (France)

29

Mise en œuvre de l'Algorithme NSGAII pour l'Optimisation Multi ...


cutting cost and time are simultaneous minimized, under technical ..... International journal of Machine Tools and manufacture 42, pp- 595/605, 2002. ...

IRevues (France)

30

Manufacturing of A micro probe using supersonic aided electrolysis ...


de RF Shyu - 2008 - Autres articlesthe cutting force and the tool wear are reduced [11], the tool life and the machined surface roughness are improved, better fluid diffusion and propagation ...

IRevues (France)

31

Magnétotribologie des contacts glissants ferromagnétiques


de H ZAIDI - 2007 - Autres articlesMuju, M., and Ghosh, A. 1980 Effect of a magnetic field on the wear of cutting tools, Wear. 58, 137-145. Hiratsuka, K. and T. Sasada, T. 1987 Wear of metals ...

IRevues (France)

32

Influence du talonnage sur la stabilité du système usinant


de P Henri - 2011It happens when tool flank face is in contact with the machined surface. A new model of ploughing with a virtual cutting lip was proposed. The ...

IRevues (France)

33

Influence de la topographie de surface induite par le fraisage sur ...


de N GUILLEMOT - 2011cutting tool. The discrepancies between the results obtained with these different specimens can be explained by different crack initiation mechanisms and by ...

IRevues (France)

34

Influence de différentes stratégies de tréflage sur la qualité de ...


de M AL AHMAD - 2007 - Autres articlesInternational Journal of Machine Tools & Manufacture, 37, 1-16. Al-Ahmad(1), M., D'Acunto, A., Martin, P. 2006, Prediction of cutting forces system in ...

IRevues (France)

35

Impact des conditions d'usinage sur la zone du matériau affectée ...


de S BISSEY-BRETON - 2007 - Autres articlescutting-force amplitude during fine turning. Int. J. of Mach. Tools & Manufacture. 46, 769-781. • Dolle, H. 1979 The influence of Multiaxial Stress, ...

IRevues (France)

36

Identification des paramètres de coupe en perçage vibratoire


de N Guibert - Autres articlesof the drill, self-maintained by the cutting energy. Thus chips are then evacuated easily. The authors developed a specific tool holder with an adapted ...

IRevues (France)

37

Fontaine et al - CFM 2009 - 6 pages


The idea is here to use existing digitizing and 3D reconstruction tools in order to check the real geometry of complex cutting tools such has mills, ...

IRevues (France)

38

Fontaine et al - CFM 2007


de M FONTAINE - 2007 - Autres articlescutting forces is presented in order to propose optimisation criteria for design and selection of cutting tools. Mots-clefs : Fraisage ; Optimisation ...

IRevues (France)

39

Etude du comportement dynamique des outils toriques en usinage 5 axes


de Y LANDON - 2007 - Autres articlescentral part of the tool is eliminated. However, dynamic problems remain during the cutting process, in particular during machinings with tools whose ratio ...

IRevues (France)

40

Elaboration du processus d'usinage des pièces prismatiques par le ...


de BEN KHALIFA - 2007 - Autres articles(Operation, cutting tool and machine-tools) of appropriate to machining features characteristics. It consists of three modules; indexing of the cases, ...

IRevues (France)

41

Effets d'échelle en Micro Fraisage d'un acier inoxydable 316L


approach includes micro tools characterization, material behaviour and ... wear analysis, experimental measurement of cutting forces and analysis of chips ...

IRevues (France)

42

Early record of tectonic magnetic fabric during inversion of a ...


Such faults cutting through the overturned forelimb (i.e. “forelimb .... The use of appropriate tools is required for interpretation of such complex signals ...

IRevues (France)

43

Early record of tectonic magnetic fabric during inversion of a ...


de DF de LAMOTTE - 2002 - Cité 1 fois - Autres articlesdard tool for structural analysis [review in Borradaile,. 1988; Rochette et al., 1992; ..... faults cutting through the overturned forelimb (i.e. ...

IRevues (France)

44

EDA Publishing/DTIP 2008 - I-Revues


... where the removal rate is higher, the cutting force and the tool wear are reduced [11], the tool life and the machined surface roughness are improved, ...

IRevues (France)

45

Download - I-Revues


more potent than the processors that power today's cutting-edge ...... fifteen years, cars will cease to be passive tools controlled by fallible users. ...

IRevues (France)

47

Construction s anatomiquemor-phométriques à partir d'images ...


Morphometric tools for landmark data . Cambridge University Press, 1991. ... [Cut9l] C . B. Cutting . Applications of computer graphics to the evaluatio n ...

IRevues (France)

48

Configuration optimale d'un réseau de neurones adapté à la ...


de I BELAIDI - 2007 - Autres articlesspecially adapted to the on line monitoring of the cutting tools wear. ..... Dimla Sr D.E., Lister P.M., « On-line metal cutting tool condition monitoring. ...

IRevues (France)

49

Comment réussir une ponction à l'aiguille fine sous échoendoscopie ...


For mediastinal lesions, Trucut biopsy-needle with a cutting procedure which ..... Research to develop new tools and techniques to reduce such errors has ...

IRevues (France)

50

Comment réussir une ponction à l'aiguille fine sous échoendoscopie ...


de M FABRE - Autres articlestions are cut for this purpose. Cystic fluid analysis of pancreatic cystic lesions is an important diagnostic tool [24-26]. EUS-guided FNA ...

IRevues (France)

51

Cholangiowirsungographie itérative dans le diagnostic différentiel ...


de V PUGLIESE - Autres articlescreatic tissue from the cutting line, ruled out ma- lignant changes in the residual pancreatic stump. .... tools as ERCP. It is allowed to hope that such an ...

IRevues (France)

52

Cholangiowirsungographie it?rative dans le diagnostic diff?rentiel ...


The intraopera tive study on frozen sections from the cutting line of the ... even by invasive but well tolerated and safe diagnostic tools as ERCP. ...

IRevues (France)

53

Carnets de G?ologie / Notebooks on Geology - Memoir 2008/02 ...


The idea of cutting the uppermost Albian into two parts ("Vraconnian" ...... They are fundamental tools insofar as by their hierarchical position and their ...

IRevues (France)

54

BUILDING CAD PROTOTYPING TOOL FOR EMERGING NANOSCALE FABRICS ENS ...


de C Dezan - 2007 - Cité 2 fois - Autres articlesThe design of CAD tools for nanofabrics involves new challenges not encountered with conventional CMOS ... Much of this is still cutting edge research. ...

IRevues (France)

55

BUILDING CAD PROTOTYPING TOOL FOR EMERGING NANOSCALE FABRICS ...


In order to implement an application on a nanofabric, specific tools are already proposed by the respective ... Much of this is still cutting edge research. ...

IRevues (France)

56

Article CFM'09 - I-Revues


de F DUCOBU - Autres articlesis not a simple scaling of macro-cutting. The chip formation involves the ..... modelling of meso-scale finish machining with finite edge radius tools. ...

IRevues (France)

57

Approches analytique et numérique pour la modélisation du perçage


de M JRAD - 2007 - Autres articlesM. Bono, J. Ni, The location of the maximum temperature on the cutting edges of a drill,. International Journal of Machine Tools & Manufacture, 46, 2006,pp. ...

IRevues (France)

58

Approche expérimentale et numérique de l'usinage assisté haute ...


regarding chip fragmentation, cutting forces, tool-chip contact length, surface finish and cutting temperature. A numerical model of orthogonal cutting has ...

IRevues (France)

59

Analyse temps-fréquence appliquée aux signaux vibratoires relevés ...


de A OUAHABI - 2007 - Autres articlesIn order to study the cutting tool wear evolution during machining, ... These indicators evolution show the transition point of the cutting tool state ...

IRevues (France)

60

Analyse du frottement aux interfaces pièce-outil-copeau au cours ...


de F ZEMZEMI - 2007 - Cité 2 fois - Autres articlesRech, J. 2006 Influence of cutting tool coatings on the tribological phenomena at the tool-chip interface in orthogonal dry cutting. ...

IRevues (France)

61

Alzheimer Disease


... Hélène AMIEVA, Institut de santé publique, d'épidémiologie et de développement, Inserm U 593, Bordeaux Sandrine ANDRIEU, Laboratoire d'épidémiologie et ... The development of new tools in the field of neuropsychology, capable of exploring the cognitive functions affected by Alzheimer's disease, advances in ...

Institut National de la Sante et de la Recherche Medicale (French)

62

ANALYSE ET EVALUATION DIAGNOSTIQUE ET THERAPEUTIQUE PAR L'IMAGE LE ...


equ i pment. The CO2 laser has rapidly become an essential tool in laryngology because of its rationality and extremely precision cutting a pa- ...

IRevues (France)

64

A layered methodology for fast deployment of new technologies Lo ...


TOOLS A. L0 to L1 model 1) L0 model: The L0 model is an extension of the .... The left diagram illustrates the cutting of the grid in several basic units. ...

IRevues (France)

65

A layered methodology for fast deployment of new technologies


de L Lagadec - 2007 - Cité 1 fois - Autres articlesThe Madeo framework includes a set of back end tools that apply to any L0 assuming it can be described .... cutting of the grid in several basic units. ...

IRevues (France)

66

8 PREFACE The new millennium is only a decade away. We can already ...


The article by Theodore Jay Gordon introduces tools for exploring the ...... The economic and social price of dramatically cutting down on fossil fuel use ...

IRevues (France)

67

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 Magn ...


RENCES Muju, M., and Ghosh, A. 1980 Effect of a magnetic field on the wear of cutting tools, Wear 58, 137-145. Hiratsuka, K. and T. Sasada, T. 1987 Wear of ...

IRevues (France)

68

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


Tools Manufact.. 29(3), 370-390 Rech, J. 2006 Influence of cutting tool coatings on the tribological phenomena at the tool-chip interface in orthogonal dry ...

IRevues (France)

69

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


Abstract : In order to study the cutting tool wear evolution during ... These indicators evolution show the transition point of the cutting tool state ...

IRevues (France)

70

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


The internal radius of the rounded part of the tool envelope is used to define the considered type of mill. The cutting edge position is described for a ...

IRevues (France)

71

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


International Journal of Machine Tools & Manufacture, 37, 1-16. Al-Ahmad(1), M., D?Acunto, A., Martin, P. 2006, Prediction of cutting forces system in ...

IRevues (France)

72

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


J. of Machine Tools and Manuf., 45, 769-781 Sims, N.D. 2005 The self-excitation ... A. 2004 Impact of the cutting dynamics of small radial immersion milling ...

IRevues (France)

73

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


Prediction of ball-end milling forces from orthogonal cutting data?, International Journal of Machine Tools & Manufacture 36, N?9, pp. 1059-1072, 1996. ...

IRevues (France)

74

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


A .R. Watson, Drilling Model for Cutting Lip and Chisel Edge and Comparison of Experimental and Predicted Results. Part1 and Part 2, Int. J. Tool. Des. ...

IRevues (France)

75

18?me Congr?s Fran?ais de M - I-Revues


The authors developed a specific tool holder with an adapted axial stiffness. The cutting conditions are chosen to be inside the instable domain so because ...

IRevues (France)

76

18 ?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


The CBR used in this work consists to look for machining processes (Operation, cutting tool and machine-tools) of appropriate to machining features ...

IRevues (France)

77

18 ?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


The influence of the nose radius, the cutting speed and the lubricant on the ..... optimum crystal plane of natural diamond tool for precision machining. ...

IRevues (France)

78

18 ?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


The main lies in a smaller variation of the effective cutting speed during the evolution of the lead angle of the tool compared to surface. ...

IRevues (France)

79

18 ?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


Part I: Cutting forces, structural deformations aand tolerance integrity ?. International Journal of Machine Tools & Manufacture 46 (2006) 1478-1488. ...

IRevues (France)