Sample records for CONCEPTION ASSISTEE PAR ORDINATEUR (computer-aided design)
from WorldWideScience.org

Sample records 1 - 20 shown. Select sample records:



1

theseAuroypdf


... A Eric Jougla qui nous a accueilli dans son service, le CépiDc, et nous a guidé A Gérard Bréart qui a bien voulu être notre directeur de thèse et nous ... et méthodes............................................................................................................... 68 V.2. Résultats : taux et ...

Institut National de la Sante et de la Recherche Medicale (French)

2

psychotherapie%5B1%5D.pdf


Cet ... et partenariat scienti- fique (Daps) pour l'instruction du dossier et avec le service de documentation du Département de l'information scientifique et ... de Pittsburgh, États-Unis Ivy BLACKBURN, cognitive and behavioural therapies centre, Newcastel Upon Tyne, Royaume-Uni Coordination scientifique et éditoriale ...

Institut National de la Sante et de la Recherche Medicale (French)

3

W


de M ANSORGE - 1991 - Autres articlesSymbolic methods show to be very attractive for the design of Digital Signal Processing (DSP) ..... [3] IEEE ASSP Magazine, Special Issue on Computer Aided ...

IRevues (France)

4

Vers la définition de com posants virtuels au niveau algorithm ...


de S PILLEMENT - 2001 - Autres articlesAn industrial view of electronic design automation.IEEE Trans. on Computer-Aided Design of. Integrated Circuits and Systems, 19( 12):1428-1448 , De- ...

IRevues (France)

5

Un réseau cellulaire VLSI fonctionnellement asynchrone pour le ...


de F ROBIN - Cité 1 fois - Autres articleson Computer-Aided Design, vol. 8, n°11, November 1989, pp. 1185-1205. [23] F. Robin, «Etude d'architectures VLSI numériques parallèles et asynchrones ...

IRevues (France)

6

Trois approches multiéchelles pour l'analyse de surface 2D-1/2.


de F DARSONVILLE - 1997 - Autres articlessubdivision surfaces", Computer Aided Geometry Design,. 1988, No 5, pp. 41-50. [6] A. Goshtaby, F. Chen, B. Barsky, "B-Spline Curves and ...

IRevues (France)

7

Trois approches multi?chelles pour l'analyse de surface 2D? Freddy ...


... in recursive subdivision surfaces", Computer Aided Geometry Design, 1988, No 5, pp. ... Computer Vision, Graphics and Image Processing, 1990, No 52, pp. ...

IRevues (France)

8

Traitement du Signal 2000 – Volume 17 – n°4 287 Graphes de ...


La quantité c désigne le lien dans T starNmax qui doit être supprimé pour définir deux .... in IEEE International Conference on computer-Aided Design, pp. ...

IRevues (France)

9

Titre de la communication


de P MITROUCHEV - 2007 - Autres articlesSeveral methods of assistance for design and optimisation have been presented concerning the ..... Computer aided structural synthesis of planar kinematic ...

IRevues (France)

10

Titre de la communication


de B ANSELMETTI - 2007 - Autres articlesComputer Aided Design, vol 38, pp 909-919. Anselmetti B., (2005) Génération automatique de la cotation fonctionnelle par la méthode ...

IRevues (France)

11

Thermal Networks form Phonon Boltzmann's Transport Equation: Part ...


de L Codecasa - 2007 - Cité 1 fois - Autres articles[3] P. Feldmann, R. W. Freund, “Efficient linear circuit analysis by Pad`e approximation via the Lanczos process,” IEEE Trans. Computer-Aided. Design, Vol. ...

IRevues (France)

12

THERMAL AND SENSITIVITY ANALYSIS OF MULTI-FIN DEVICES Brian Swahn ...


Design and CAD Challenges in Sub-90nm CMOS Technologies. In Proc. Int. Conf. on Computer Aided Design, pages 129–36, 2003. [3] Y. Choi, N. Lindert, P. Xuan, ...

IRevues (France)

13

TEMPERATURE GRADIENT ALLEVIATING METHODS FOR ARITHMETIC UNITS ...


de R Egawa - 2006 - Autres articlesTrans. of Computer-Aided Design of Integrated Circuit and. Systems, Vol.9, No.2, pp. 253 – 266, Feb. 2002. [12] R. Marculescu, D. Marculescu, and M. Pedram, ...

IRevues (France)

14

Séquenceur Mémoire pour Applications Multimédias Temps Réel Gérant ...


de B LE GAL - 2005 - Autres articlestions on Computer-Aided Design of Integrated Circuits and Systems, 17(12) :1273 1280, 1998. [4] J. Park and P.C. Diniz. Synthesis of pipelined memory ...

IRevues (France)

15

Synth#12ese architecturale des syst#12emes asynchrones Joseph O ...


In Int. Conf. on Computer-Aided Design #28ICCAD#29, pages 587#7B591.IEEE Com- puter Society Press, November 1992. #5B3#5D R.M. Badia and J. Cortadella. ...

IRevues (France)

16

Synth ese architecturale des syst emes asynchrones


de JO DEDOU - 1999 - Autres articlesComputer-Aided Design ICCAD , pages 587 591. IEEE Com- puter Society Press, November 1992. 3 R.M. Badia and J. Cortadella. High-Level Synthesis of Asyn- ...

IRevues (France)

17

Simulation de fonctionnement de filtres numériques récursifs pour ...


de V DEVLAMINCK - Autres articles[6] F. J. TAYLOR et J . W . MARSCHALL, Computer Aided. Design and analysis of standard IIR Architectures,. IEEE Circuits and Systems magazine, 3, n° 4, Dec. ...

IRevues (France)

19

Reverse Engineering et Copiage rapide de nuages de points numérisés


de C LARTIGUE - 2007 - Autres articlesdata sampled from a smooth surface, Computer Aided geometric Design, 17, 521-543. ... its application to normal vector estimation, Computer-Aided Design, ...

IRevues (France)

20

Recherche d'une exploitation énergétique optimale des ressources ...


de M DULONG - 2009 - Autres articlesTransactions on Computer-Aided Design of Integrated. Circuits and Systems, vol. 21, no. 11, 2002. [9] Sinha, A.; Chandrakasan, A.P.: JouleTrack-a Web ...

IRevues (France)

21

RESUME


de A LEMER - 1989 - Cité 7 fois - Autres articles199g, "Learning Networks Improve Computer-Aided. Prédiction and control". Computer Design/ August 1975 pp 65-70 l'ensemble ion par [6] YJÄMMIRATI, DÆÏEVEU ...

IRevues (France)

22

RE 1995 \ -LES-PINS - DU 1s AU 21 SEPTEMB


de M DUDON - 1995 - Autres articlesview and classification", Computer-aided design, Vol. 20, No. l, jan/feb 1988. [3] F. Davoine, J .-M. Chassery, "Compression dîmages par fracta- ...

IRevues (France)

23

Proceedings

Yeh, Gar-on, Anthony

Author index vii Preface Yeh, Anthony G.O. Yeh, Anthony G.O. xi List of contributors 531 Computer aided landslip potential mapping and its application to land use planning and development control Siddle, H.J. Siddle, H.J. Turner, M.D. Turner, M.D. Bentley, S.P. Bentley, S.P. 1 Boolean maps and the rat...

DRIVER (French)

24

Preparation of Papers in Two-Column Format for the Proceedings of ...


de VM Hériz - 2007 - Cité 2 fois - Autres articlesIEEE/ACM international Conference on Computer-aided design. pp. 124 – 127, 1999. [2] YONG ZHAN and SACHIN S. SAPATNEKAR. Fast Computation of ...

IRevues (France)

25

Plate-forme de Conception d'Architectures Reconfigurables ...


de J LALLET - 2009 - Autres articlesAbstract – The area of this work is the architecture description, computer-aided design (CAD) and exploration of dynamically reconfigurable architectures. ...

IRevues (France)

26

Place de la CFAO dans l'industrie automobile


de P Bézier - Autres articlesS. Coons, Surfaces for computer aided design of space forms, technical. reportMAC-TR-41, MIT, Cambridge Mass, 1967 ; traduction française, Méthode ...

IRevues (France)

27

Optimisation multicritère de composants mécaniques à l'aide d'une ...


Computer Aided Design System, In Workshop notes Constraint Processing in CAD of the Third. International Conference on Artificial Intelligence in Design, ...

IRevues (France)

28

Optimisation de placement dans les problèmes de conception


de J Guillaume - 2011Computer-Aided Design, 34(8), 597–611, 2002. [2] Aladahalli C., Cagan J., et Shimada K. Objective function effect based pattern search - theoretical frame- ...

IRevues (France)

29

Optimisation de la largeur des opérateurs arithmétiques pour la ...


de N HERVE - 2005 - Autres articleson Computer-Aided Design of Integrated Circuits and Systems, 20:921–. 930, August 2001. [6] E. Martin, J. Toureilles, and C. Nouet. ...

IRevues (France)

30

Optimisation collaborative de systèmes multiobjectifs Deux cas d ...


de P DÉPINCÉ - 2007 - Autres articlesOptimization problem behind systems design is often multiobjectif and ..... STEP-NC Computer Aided Process Planning of Prismatic Components International ...

IRevues (France)

31

On the interaction between the engineering design and the development process models - Part II: Shortcomings and limitations

Motte, Damien; Bjärnemo, Robert; Yannou, Bernard

Models of the engineering design process and of the development process nowadays present similar forms in the engineering design literature and interact in a similar way. These models are often presented as generic, in order to be used in a wide area of applications. This interaction is however not ...

DRIVER (French)

32

On synthesis in the later phases of the mechanical engineering design process

Motte, Damien

Only 15% to 30% of product development projects require the development of new product concepts. This means that the majority of design projects are carried out within the embodiment design and detail design phases. However, the majority of the research studies on the mechanical engineering design p...

DRIVER (French)

33

OBJETS INTERMÉDIAIRES DANS UNE SITUATION DE CONCEPTION EN ...


de A GERONIMI - 2005 - Cité 3 fois - Autres articlescomputer aided design. PATT/ITEA conference, Haarlem, Netherlands. LEBAHAR, J.-C. (1996). L'activité de simulation d'un dessinateur CAO dans une ...

IRevues (France)

34

Nonlinear Projection-Based Approach for Generating Compact Models ...


[8] J. R. Phillips, ìProjection-based approaches for model re- duction of weakly nonlinear, time-varying systems,î IEEE Trans. Computer-Aided Design, Vol. ...

IRevues (France)

35

Nonlinear Projection-Based Approach for Generating Compact Models ...


de L Codecasa - Cité 4 fois - Autres articlesproach to model order reduction and fast simulation of nonlinear circuits and micro machined devices,”,” IEEE. Trans. Computer-Aided Design, Vol. 22, No. ...

IRevues (France)

36

Nice, Côte d'Azur, France, 27-29 September 2006 ©TIMA Editions ...


Therefore, efficient thermal design is becoming increasingly essential given ..... of the IEEE/ACM International Conference on Computer-Aided Design, pp. ...

IRevues (France)

37

Next Generation of TCAD Environments for MEMS Design


de U Triltsch - 2008 - Cité 2 fois - Autres articlessystem for computer aided design of microsystems, Microsystem. Technologies, Vol. 12, 2006, April, S. 650-654. [2] O. Than and S. Büttgenbach: Simulation of ...

IRevues (France)

38

Modélisation et simulation des efforts de coupe en fraisage 2.5 axes


de Z BOUAZIZ - 2007 - Autres articlesComputer Aided Design, vol 35, 4, pp. 375-382, 2003. [8] Chanal (H) : « Optimisation des sollicitations de l'outil dans le cadre de l'usinage de poches ». ...

IRevues (France)

39

Managing Stormwater Productively Using Pervious Pavements


de N Jayasuriya - 2007Computer-aided design of concrete block pavement for reducing stressors and contaminations in an urban environment. Proceedings of 7th International ...

IRevues (France)

40

Lumped Electro-Thermal Model of On-chip Interconnects Nadia ...


[6] B. Kahng Andrew, and Sudhakar Muddu, ”An Analytical Delay Model for RLC Interconnects,” IEEE Trans. on Computer-Aided Design of Integrated Circuits and ...

IRevues (France)

41

Lumped Electro-Thermal Model of On-chip Interconnects


de N Spennagallo - 2006 - Cité 2 fois - Autres articlesnects,” IEEE Trans. on Computer-Aided Design of Integrated Circuits and Systems, vol. 24, issue 6, pp. 849-861, 2005. [6] B. Kahng Andrew, and Sudhakar ...

IRevues (France)

42

Le spectre à la sortie d*un amplificateur de puissance non linéaire


de Y WANG - 2003 - Cité 1 fois - Autres articlesplifier design for CDMA signals. Int. J. Microwave. Millimeter Wave Computer Aided Eng., pages 283. 292, Feb. 1998. [2] Gard K.G., Gutierrez H.M., ...

IRevues (France)

43

International Workshop on THERMal INvestigations of ICs and ...


Computer-Aided Design, Vol. 17(No. 8):668{681, 1998. [3] Massoud Pedram Kaustav Banerjee and Amir H. Ajami. "Analysis and Optimization of Thermal Issues in ...

IRevues (France)

44

Infrastructure PLM pour la capitalisation et la réutilisat…


de G DUCELLIER - 2007 - Autres articlesPark S.C., Knowledge Capturing Methodology in Process Planning, Computer Aided Design. 35, p109-1117, 2003. Myung S., Han S., “Knowledge-based parametric ...

IRevues (France)

45

Information science, computers and medical decisions F.T. DE - I ...


A computer-aided assessment of its magnitude and importance in 552 pa tients with ..... qui deviendront bient?t ?videntes dans le design des syst?mes. ...

IRevues (France)

46

Information science, computers and medical decisions


de FT DE DOMBAL - Autres articlesshortly become apparent for the design of sys- ... jaundice, and have shown that computer-aided ..... OHMANN C. — Human and computer-aided analysis of ...

IRevues (France)

47

Geo-engineering computer simulation looks pretty but is it the ...


de Z SIKORA - 2007 - Autres articlesaided-disaster” in the hands of analysts who may have the “computing” skills but ... The design of geotechnical structures is mainly based on a numerical ...

IRevues (France)

48

Fundamental building blocks for the realization of a single ...


de G Zardalidis - 2006 - Autres articlesThe need for computer-aided design and simulation of single-electron circuits has long been recognized [8]. Several simulators have been ...

IRevues (France)

49

Fundamental Building Blocks for The Design of A Single-electron ...


The need for computer-aided design and simulation of single-electron circuits has long been recognized [8]. Several simulators have been implemented to ...

IRevues (France)

50

Fontaine et al - CFM 2007


de M FONTAINE - 2007 - Autres articlesComputer-Aided Design 33, 57-63. Tsai Y-C. & Hsieh J-M. 2001 A study of a design and NC manufacturing model of ball-end cutters. J. of. Mat. Proc. Tech. ...

IRevues (France)

52

Filtrage statistique d'un capteur de position angulaire par ...


graphs for a coefficient”, IEEE Trans. on computer-aided Design of inte- grated circuits and systems, Vol 27, No 5, pp 958–962, mai 2008. ...

IRevues (France)

53

Estimation probabiliste de la complexité de circuits VLSI pour le ...


de JP DIGUET - 1997 - Autres articlesComputer-Aided Design, 8(6) :661–679, June 1989. [11] J.Ph. Diguet, O. Sentieys, D. Chillet, and J.L. Philippe. Vlsi high level synthesis of fast exact ...

IRevues (France)

54

Estimation de la consommation au niveau architectural pour les ...


de D SAILLE - 1999 - Autres articlesTherefore power requirements are driving a new breed of computer-aided design tools. This paper addresses the problem of modeling power dissipation at a ...

IRevues (France)

55

Enhanced criteria for phosphorus removal from stormwater ...


hydrologic, hydraulic, and water quality analysis. HydroCAD®, a computer aided stormwater design package, was used for evaluating the sizing performance. ...

IRevues (France)

56

ERROR INDICATOR TO AUTOMATICALLY GENERATE DYNAMIC COMPACT ...


de EB Rudnyi - Cité 7 fois - Autres articlesIEEE Transactions On Computer-Aided Design of Integrated. Circuits and Systems, vol. 18, pp. 133-141, 1999. [18] T. Bechtold, E. B. Rudnyi and J. G. Korvink ...

IRevues (France)

57

ENS?05 Paris, France, 14-16 December 2005 Computational Simulation ...


?Physical Mesomechanics of Heterogeneous Media and Computer-Aided Design of Materials?, Cambridge International Science Publishing, Cambridge, pp. ...

IRevues (France)

58

ENS'07 Paris, France, 3-4 December 2007


de EDH Tenhunen - 2007 - Autres articlesDesign, November 2005. [20] R. Bryant, “Graph-based algorithms for Boolean function manipulation,” Transactions on Computer-Aided Design of ...

IRevues (France)

59

Development of a Prototype Thermal Management Solution for 3-D ...


de D Gerty - 2007 - Cité 5 fois - Autres articlesInternational Conference on Computer Aided Design , pp. 86-89,. 2003. [11]. B. L. Smith, and A. Glezer, “The Formation and Evolution of ...

IRevues (France)

60

Des architectures intégrées pour la vision synthèse automatique en ...


de F VERDIER - 1997 - Autres articlesComputer aided computer design is an open problem because computers are becoming more and more powerfull, more and more complex and .. smaller. ...

IRevues (France)

61

De la spécification formelle au partitionnement matériel logiciel ...


de M ISRAEL - Autres articlesOn Computer-Aided Design, Nov 1994. [151 E. Barros, W. Rosentiel, and X. Xiong, «Hardware/software partitionning using whit UNITY», in Proc . ...

IRevues (France)

62

DROPLET-BASED HOT SPOT COOLING USING TOPLESS DIGITAL MICROFLUIDICS ...


IEEE Transactions on Computer-Aided Design on Integrated Circuits & Systems, vol. 19, 253-266, February 2000. [3] S. Mukherjee and I. Mudawar, ? ...

IRevues (France)

63

DROPLET-BASED HOT SPOT COOLING USING TOPLESS DIGITAL MICROFLUIDICS ...


de P Paik - 2006 - Cité 2 fois - Autres articlesTransactions on Computer-Aided Design on Integrated. Circuits & Systems, vol. 19, 253-266, February 2000. [3] S. Mukherjee and I. Mudawar, “Smart, low-cost, ...

IRevues (France)

64

DISPERSION IMPACT ON BALLISTIC CNTFET N+-I-N+ PERFORMANCES ...


de P Desgreys - 2006 - Cité 2 fois - Autres articlestransistors", IEEE Trans. on Computer-Aided Design of ICS, vol. 23, n°10, Oct. 2004. [4] P. Avouris, R. Martel, V. Derycke et J. Appenzeller, ...

IRevues (France)

65

Contraintes mémoire et solution architecturale pour applications TDSI


de G CORRE - 2003 - Cité 5 fois - Autres articlesIEEE Trans. on Computer-aided design, Vol.14, No.8, p 945-. 960, Aug. 1995. [4] N. Passos, E. Sha, L-F. Chao, "Multi-dimensional interleaving ...

IRevues (France)

66

Construction d'approximation globale par approche bayésienne pour ...


de B SOULIER - 2007 - Autres articlesIn the optimal and robust design field, the response surface methodology are used ..... Fleury, C., Braibant, V. 1984 Optimization methods, Computer Aided ...

IRevues (France)

67

COLLOQUE NATIONAL sun LE TRAITEIVIENT DU SIGNAL .9"'/'\/


de G LENGLET - 1977computer aided-design is helptul, on account of his numerous possibilities of repeated séquences and compi- lotions'. La précision des calculs est d'autant ...

IRevues (France)

68

COLLOQUE NATIONAL SUR LE TRAITEMENT DU SIGNAL ET SES APPLICATIONS


alfori thms for computer aided design of digital fil- ters . The first one, OPT-Z, effects discrete optimiza- tion of the coefficients of digital filters ...

IRevues (France)

69

CAD/CAE interoperability, an automatic generation of Analysis ...


de H Mounir - 2011Computer-Aided Design, 2005, 37, 941–955. [8] Fischer X. Stratégie de conduite du calcul pour l'aide à la décision en conception mécanique intégrée, ...

IRevues (France)

70

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing/THERMINIC ...


International Conference on Computer Aided Design , pp. 86-89, 2003. [11] B. L. Smith, and A. Glezer, ?The Formation and Evolution of Synthetic Jets?, ...

IRevues (France)

71

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing/THERMINIC ...


Sep 19, 2007 ... IEEE Trans. on Computer-Aided Design of Integrated Circuits and Systems, Vol. 21, No. 12, pp. 1434-1445, Dec. 2002. ...

IRevues (France)

72

Budapest, Hungary, 17-19 September 2007 ?EDA Publishing/THERMINIC ...


Proceedings of the 2005 IEEE/ACM International conference on Computer-aided design, San Jose, CA, pp. 635-638, 2005. [4] P. E. BAGNOLI, C. CASAROSA and F. ...

IRevues (France)

73

Belgirate, Italy, 28-30 September 2005 THERMAL-AWARE DESIGN RULES ...


International Conference on Computer-Aided Design (ICCAD?02). [2] M. Rencz, V. Sz?kely and A Pope ?A Fast Algorithm for the layout based Electro-thermal ...

IRevues (France)

74

Belgirate, Italy, 28-30 September 2005 TEMPERATURE GRADIENT ...


IEEE Trans. of Computer-Aided Design of Integrated Circuit and Systems, Vol.9, No.2, pp. 253 ? 266, Feb. 2002. [12] R. Marculescu, D. Marculescu, ...

IRevues (France)

75

Belgirate, Italy, 28-30 September 2005 MODEL REDUCTION FOR THERMO ...


Preserving the film coefficient as a parameter in the compact thermal model for fast electro-thermal simulation. IEEE Transactions on Computer- Aided Design ...

IRevues (France)

76

Belgirate, Italy, 28-30 September 2005 ERROR INDICATOR TO ...


IEEE Transactions on Computer- Aided Design of Integrated Circuits and Systems, accepted for publication, 2005. [15] D. Celo, P. K. Gunupudi, R. Khazaka, ...

IRevues (France)

77

Belgirate, Italy, 28-30 September 2005 ANALYTICAL THERMAL STRESS ...


Such testing could be carried out on the design (product development) stage, ... The today?s numerical models are, as a rule, computer- aided, ...

IRevues (France)

78

BUILDING CAD PROTOTYPING TOOL FOR EMERGING NANOSCALE FABRICS ENS ...


de C Dezan - 2007 - Cité 2 fois - Autres articlesComputer-Aided Design of Integrated Circuits and Systems, vol. 26, pp. 817-833, May 2007. [12] C.A. Moritz, T. Wang, P. Narayanan, M. Leuchtenburg, Y. Guo, ...

IRevues (France)

79

BUILDING CAD PROTOTYPING TOOL FOR EMERGING NANOSCALE FABRICS ...


[11] C. He and M. F. Jacome, "Defect-Aware High-Level Synthesis Targeted at Reconfigurable Nanofabrics", IEEE Transactions on Computer-Aided Design of ...

IRevues (France)

80

Author Guidelines for 8


de LV Bochkareva - 2006 - Cité 1 fois - Autres articlesComputational Simulation and 3D Virtual Reality Engineering Tools for Dynamical Modeling ..... Media and Computer-Aided Design of Materials”, Cambridge ...

IRevues (France)

81

Analyse isogéométrique et corrélation d'images


de J RÉTHORÉ - 2011During the past few years, research groups have been interested in using Computer Aided Design (CAD) functions. (NURBS) for the numerical analysis of ...

IRevues (France)

82

An Adaptive-Grain Thermal Simulation Method to Evaluate Effects of ...


de M Ito - 2006 - Autres articlesComputer-Aided. Design, Vol. 17(No. 8):668–681, 1998. [3] Massoud Pedram Kaustav Banerjee and Amir H. Ajami. ”Analysis and Optimization of Thermal Issues in ...

IRevues (France)

83

Algorithm-Architecture Matching Metrics


de JP DIGUETsynthesis of asic's," Ieee Trans. on Computer-Aided Design, vol. 8, no. 6, pp. 661-679, June 1989. Manuscrit reçu le 23 juillet 1997. Olivier SENTIEYS ...

IRevues (France)

84

AS


Computer-Aided Design System,” J. IEEE SC-21. We have shown that the automated design of pp" 73' 85 (Febrllaly 1986) parallel/pipeline machines is greatly ...

IRevues (France)

85

AN EXTENDABLE MULTI-PURPOSE SIMULATION AND OPTIMIZATION FRAMEWORK ...


... and methods have to be developed in order to describe the observed behavior with suącient accuracy in tcad (technology computer-aided design) software. ...

IRevues (France)

86

AN EXTENDABLE MULTI-PURPOSE SIMULATION AND OPTIMIZATION FRAMEWORK ...


de S Holzer - 2006 - Autres articles(technology computer-aided design) software. Today's semiconductor devices and interconnect structures have already reached a level of complexity, ...

IRevues (France)

87

A study of the mechanical design engineer's strategies and tactics during the later phases of the engineering design process

Motte, Damien; Andersson, Per-Erik; Bjärnemo, Robert

This paper presents the results of an explorative study on the strategies and tactics applied by the mechanical designer during the later phases of the design process. The method chosen for this study is experiment-based, which is appropriate for an in-depth examination of the designer's activities....

DRIVER (French)

88

A new modelling methodology of MEMS structures based on Cosserat ...


de M Calis - 2008 - Cité 1 fois - Autres articlesComputer-Aided Design of Integrated circuits and systems, vol. 25, no. 2, 2006. [7]. M. Paz, and L. Dung, “Power series expansion of the general ...

IRevues (France)

89

A Mernoootocv FOR ASIC IMPLEMENTATION OF DIGITAL FILTERS


de U SJOSTROM - 1989 - Autres articlesFurthermore, some Computer Aided Design (CAD) tools have been developed during the project. l. introduction. Digital Signal Processing (DSP) presents many ...

IRevues (France)

90

A DYNAMIC NETWORK MODEL FOR NANOSCALE SYSTEMS Elena Dubrova Hannu ...


Kauffman net- works: Analysis and applications,? in Proceedings of the IEEE/ACM International Conference on Computer-Aided Design, November 2005. ...

IRevues (France)

91

9-11 April 2008 ?EDA Publishing/DTIP 2008 ISBN: 978-2-35500-006-5 ...


REFERENCES [1] D. Straube, U. Triltsch, H.-J. Franke, S. B?ttgenbach: Modular software system for computer aided design of microsystems, ...

IRevues (France)

92

9-11 April 2008 ?EDA Publishing/DTIP 2008 ISBN: 978-2-35500-006-5 ...


FFTSVD: A Fast Multiscale Boundary-Element Method Solver Suitbale for Bio- MEMS and Biomolecule Simulation?, IEEE Transactions on Computer-Aided Design of ...

IRevues (France)

93

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


Computer-Aided Design 33, 57-63 Tsai Y-C. & Hsieh J-M. 2001 A study of a design and NC manufacturing model of ball-end cutters. J. of Mat. Proc. Tech. ...

IRevues (France)

94

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


Park S.C., Knowledge Capturing Methodology in Process Planning, Computer Aided Design 35, p109-1117, 2003 Myung S., Han S., ? ...

IRevues (France)

95

18?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


The design of geotechnical structures is mainly based on a numerical .... Computer-aided liability. ASCE, Civ. Eng., 40?43 Chambon, R., Caillerie, D. 1999. ...

IRevues (France)

96

18 ?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


The Visual Computer, 5, 329-348 Lin, A.C., Liu, H-T. 1998 Automatic generation of NC cutter path from massive data points. Computer Aided Design, 33(1), ...

IRevues (France)

97

18 ?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 1 ...


.Computer Aided Design, vol 35, 4, pp. 375-382, 2003. [8] Chanal (H) : ? Optimisation des sollicitations de l?outil dans le cadre de l?usinage de poches ? ...

IRevues (France)

98

18 ?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 ...


Abstract : Optimization problem behind systems design is often multiobjectif ... (1) an application in the field of Computer Aided Process Planning based on ...

IRevues (France)

99

18 ?me Congr?s Fran?ais de M?canique Grenoble, 27-31 ao?t 2007 ...


Abstract : In the optimal and robust design field, the response surface .... V. 1984 Optimization methods, Computer Aided Analysis and Optimiza- tion of ...

IRevues (France)

100

18 ?me Congr?s Fran?ais de M - I-Revues


R?f?rences Anselmetti B., Mawussi K., (2003a) Computer Aided Tolerancing using ... based on positioning features, Computer Aided Design, vol 38, pp 909-919. ...

IRevues (France)

101

Conception optimisée d'architectures en précision finie pour les ...


To control these new technologies, new design methods and new computer-aided design tools have appeared : the system design and the behavioral design. ...

IRevues (France)

102

Conception des unités mémoire pour des applications de traitement ...


de D CHILLETConference on Computer Aided Design, 1993. [13] I.M. Verbauwhede, C.J. Scheers, and J.M. Rabaey. Memory estimation for high level synthesis . ...

IRevues (France)

103

Conception de montage d'usinage : placement des éléments ...


de S ZIRMI - 2011[11] A. Senthil kumar, J.Y.H. Fuh, T.S. Kow,” An automated design and assembly of interference – free modular fixture setup”, Computer-Aided Design 32 ...

IRevues (France)

104

Conception de circuits dédiés à une classe d'applications (ASIP ...


de JG COUSIN - 1997 - Autres articlesming Set Data Types to Power Optimal Data Structures. IEEE Trans. on Computer Aided Design of Integrated. Circuits and Systems, 15(6) :619–629, June 1996.

IRevues (France)

105

Conception d'un système de reconnaissance de gestes dansés Design ...


[25] E. Saux et M. Daniel, « Data reduction of polygonal curves using B-splines», Computer-aided design, (31): pp.507-515, 1999. ...

IRevues (France)

106

Conception d'un système de reconnaissance de gestes dansés Design ...


de S Boukir - 2004 - Cité 1 fois - Autres articlesB-splines», Computer-aided design, (31): pp.507-515, 1999. [26] T. Starner et A. Pentland, « Visual recognition of american sign lan- ...

IRevues (France)