Winding inductances of fractional slot surface-mounted permanent magnet brushless machines
Howe, David; Jahns, Thomas M.; EL-Refaie, Ayman M.
German National Library of Science and Technology (GetInfo) (German)
Winding design for pole-phase modulation of induction machines
Dongsen Sun,; Baoming Ge,; Daqiang Bi,
Winding design and characteristic comparison for induction machines with pole-phase moudulation
Sun, D.-s.; Ge, B.-m.; Bi, D.-q.
Winding Inductances of Brushless Machines with Surface-Mounted Magnets
Zhu, Z. Q.; Howe, D.; IEEE
Winding Factors and Joule Losses of Permanent Magnet Machines with Concentrated Windings
Magnussen, F.; Sadarangani, C.; IEEE
Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC Machines
Chen, J T; Zhu, Z Q
Winding Arrangement for Multipolar Squirrel Cage Induction Machines with Low Leakage Inductance
Kueng, L.; Reichert, K.; Vezzini, A.
Winding : machines, mechanics and measurement
Good, James K.; Roisum, David R.
Frye, Kenneth G.
WG P434-Functional Evaluation of Insulation Systems for Large High-Voltage Machines
Rux, L.; IEEE
Use of a Permeance Model to Predict Force Harmonic Components and Damper Winding Effects in Salient Pole Synchronous Machines
Knight, A. M.; Karmaker, H.; Weeber, K.
Two-dimensional analytical model for eddy-current rotor loss calculation of PMS machines with concentrated stator windings and a conductive shield for the magnets
Transformers on-load exciting current park's vector approach as a tool for winding faults diagnostics
Oliveira, L. M. R.; Cardoso, A. J. M.; Cruz, S. M. A.
Torque-Speed Characteristic of Elevator Deep Rotor Bar and Double Stator Winding Asynchronous Machines. Modelling and Measurement
Martinez-Roman, J.; Serrano-Iribarnegaray, L.; Middle East Technical University
Toroidally wound induction machines
Jensen, Bogi B; Jack, Alan G
Toroidal Coil Winding Machines - Making the Best Choice
Mirza, N. I.; Institute of Electrical and Electronics Engineers; Electrical Electronics Insulation Conference
The study of the nanosecond pulse method to detect winding deformation of power transformer
Cui Ting,; Yin Hua,; Wu Gaolin,
The mechanics of winding
Roisum, David R.
The influence of winding insulation's impregnation on partial discharges corona inception voltage
The Development of Micaceous Conductor/Turn Insulation for H.V. Rotating Machines
Neal, J. E.; IEEE; National Electrical Manufacturers Association
Synchronous machines with single or double 3-phase star-connected winding fed by 12-pulse load commutated inverter. Simulation of operational behaviour
Ivarson, C.; Toader, S.; Alasuvanto, T.
Studying rotor eddy current loss of PM machines using nonlinear FEM including rotor motion
Hung Vu Xuan,; Lahaye, D; Hoeijmakers, M J
Study on harmonic reduction by synchronous machine adding q-axis field winding
Mukai, E.; Yano, T.
Study of Electroinsulation Materials Composed of Mica Paper and Polymer Film for Applying in HV Rotating Electrical Machines
Andreyev, A. M.; Vakser, N. M.; Starovoitenkov, V. V.
Stresses on AC Motor Winding Insulation when Fed from PWM Inverters
Srinivasan, G. K.; Indian Electrical and Electronics Manufacturers' Association; Electrical Research and Development Association
Stator winding assessment using TVA probe
Brown, A. J.; IEE; Professional Group P1 (Electrical machines and drives)
Stator end winding problems in large synchronous generators and some remedies
Van Tran, T.; Gol, O.
Segmented switched reluctance motor with novel winding and excitation strategy
Vandana, R; Fernandes, B G
Rotor losses in fractional-slot three-phase and five-phase PM machines
Fornasiero, E; Bianchi, N; Bolognani, S
Risk in Surge Testing of Turn Insulation in Windings of Rotating Machines
Gupta, B. K.; IEEE
Reduction of force exciting influences to decrease radiation of acoustic noise in synchronous machines
Hameyer, Kay; Schulte, Stephan
Recent Experience with Directional Couplers for Partial Discharge Measurements on Hydrogen Cooled Rotating Machines in a Noisy Environment
Bromley, J. C.; McDermid, W.; IEEE
RTD as the Valuable Tool in Partial Discharge Measurements on Rotating Machines
Berler, Z.; Blokhintsev, I.; Golubev, A.
Prospects of application of inductor machines with excitation winding
Solomin, A.; Zherdev, I.; Rusakov, A.
Principles of designing the form of a circuit and electromagnetic properties of three-phase symmetric fractional windings of electrical machines
Prevention of harmful EDM currents in inverter-fed AC machines by use of electrostatic shields in the stator winding overhang
Magdun, O; Gemeinder, Y; Binder, A
Prediction of damper winding currents and force harmonic components in large synchronous machines
Knight, A. M.; Karmaker, H.; Weeber, K.
Permanent magnet machines with fractional slot winding for electric traction
Koch, T.; Binder, A.
Performance of Three-Phase Motors after Disconnecting Damaged Coils
Seinsch, Hans; Brune, Kai
Partial Discharge Cross-Talk Recognition in Rotating Machines by Pulse-Shape Analysis: Preliminary Results
Cavallini, A.; Conti, M.; Montanari, G. C.
Parasitic forces in large synchronous machines considering tooth ripple effects
Traxler-Samek, G; Lugand, T; Uemori, M
Parameter identification of an axial-flux induction machine by winding functions
Hecker, Q; Igelspacher, J; Herzog, H.-G
PS6-22 The Analysis of Generator Stator Winding Parallel Branches Circulating Current on Rotor Winding Interturn Short Circuit Fault
Shuting, W.; Heming, L.; Fanchao, M.
PD Diagnostics on Rotating Machines - Possibilities and Limitations
Hoof, M.; Lanz, S.; IEEE
Orthogonal transformation of moving grid model into fixed grid model in the finite element analysis of induction machines
Stachowiak, Dorota; Demenko, Andrzej
Optimal number of strands in electrical medium-frequency machines
Kasten, H; Hofmann, W
Operation of Fault Tolerant Machines with Winding Failures
Haylock, J. A.; Mecrow, B. C.; Jack, A. G.
Numerical field calculation of stator winding faults in synchronous machines
Rosendahl, Jens; Kulig, Stefan
New Methods of Partial Discharge Measurement for the Assessment and Monitoring of Insulation in Large Machines
Zhou, Y.; Gardiner, A.; Mathieson, G.
New Developments in Resin Rich Insulating Systems for High Voltage Rotating Machines
Anton, A.; IEEE
Modelling and simulation of stator winding faults in three-phase induction motors, including rotor skin effect
Cruz, S. M. A.; Cardoso, A. J. M.
Modelling and FE parameter identification of permanent magnet synchronous machines in consideration of spatial harmonics
Brune, A; Dempewolf, K.-H; Ponick, B
Modeling of Electric Machines for Automotive Applications Using Efficiency Maps
Lukic, S. M.; Emadi, A.; IEEE
Long armature linear synchronous motor with NdFeB field winding
Ferreira, A. C.; Stephan, R.; Moreira, M. A. C.
Line current spectrum analysis in saturated three-phase cage induction machines
Influence of inverter nonlinearity on parameter estimation in permanent magnet synchronous machines
Liu, K; Zhu, Z Q; Zhang, Q
Influence of end winding leakage in permanent magnet excited synchronous machines with asymmetrical rotor design
Henneberger, G.; Domack, S.; Berndt, J.
Impact of winding and gap flux density harmonics on brushless doubly fed reluctance machines
Schulz, E. M.; Betz, R. E.; Institution of Electrical Engineers
Impact of Winding Layer Number and Magnet Type on Synchronous Surface PM Machines Designed for Wide Constant-Power Speed Range Operation
El-Refaie, A.M.; Jahns, T.M.
IEEE STD 56-1977 (R1991)-Guide for Insulation Maintenance of Large Alternating-Current Rotating Machines Rated 10 000 kV and Larger
Conley, D.; IEEE
How to Achieve Lower Tolerances in Production Balancing Machines
Thelen, D.; Burkert, W. G.; IEEE
Finite element analysis of a concentrated winding multi-phase induction machine
Toliyat, H. A.; Qahtany, N. H.
Field and field-circuit models of electrical machines
Demenko, Andrzej; Hameyer, Kay
Fault tolerant winding technology comparison for Flux Switching Machine
Raminosoa, T; Gerada, C
FE-based Physical Phase Variable Model of PM Synchronous Machines with Stator Winding Short Circuit Fault
Mohammed, Osama A.; Liu, S.; Liu, Z.
Experience with Partial Discharge Measurements on Rotating Machines in Ontario Hydro
Sedding, H. G.; Gupta, B. K.; Culbert, I. M.
End-winding leakage reactance of concentrically-wound machines
Smith, S.; Williamson, S.
End winding fields and forces in salient-pole synchronous machines
Karmaker, H. C.; Helsinki University of Technology
Effect of parallel winding paths on the run-up performance of three-phase induction motors
Detection of winding faults in electrical machines using the frequency response analysis method
Marek Florkowski; Jakub Furgał
Detection of inter-coil short circuits in synchronous machine armature winding on the basis of analysis of machine magnetic field
Elez, Ante; Car, Stjepan; Maljkovic, Zlatko
Design and analysis of full pitch winding and concentrated stator pole winding three-phase flux reversal machine for low speed application
More, D.; Kalluru, Hari; Fernandes, B.
Description of electrical machine windings in the finite element space
Concentrated winding axial flux permanent magnet motor for industrial use
Jussila, H; Nerg, J; Pyrhönen, J
Concentrated winding PM machines: a pre-design approach
Masmoudi, Ahmed; Abdennadher, Imen; Elantably, Ahmed
Comparison of non-overlap winding radial flux PM hub drives for EVs
Rix, A J; Kamper, M J
Comparison of Optimal Design and Performance of PM Machines having Non- Overlapping Winding and Different Rotor Topologies
Evans, D.; Azar, Z.; Wu, L.J.
Comparative Performance of Woven Glass and Polyester Film Backed Micaceous Tapes for the Insulation of High Voltage A.C. Stator Windings of Rotating Electrical Machines
McNaughton, H. S.; Institute of Electrical and Electronics Engineers; Electrical Electronics Insulation Conference
Coil connections and winding factors in flux-switching PM brushless AC machines
Chen, Jin-Tao; Zhu, Zi-Qiang
Calculation of the End Winding Force for Electrical Rotating Machines
Park, J.; Kim, K.; Lee, J.
Calculation of Winding Equivalents in Electrical Machines
Cubilla, R. M.; Middle East Technical University; Istanbul Technical University
Benefits of Increasing the Number of Stator Phases in Terms of Winding Construction Technology in High-Power Electric Machines
Tessarolo, A.; Institution of Engineering and Technology
Balancing Considerations for the Repair of Large Electric Machines
Reimann, S. J.; IEEE; National Electrical Manufacturers Association
Analytical calculation of the magnetic field in electrical machines due to the current density in an airgap winding
Holm, S. R.; Polinder, H.; Ferreira, J. A.
Analytical calculation model for stator winding faults in synchronous machines
Rosendahl, J; Steins, H
Analytic calculation of the voltage shape of salient pole synchronous generators including damper winding and saturation effects
Traxler-Samek, G.; Schwery, A.; Schmidt, E.
Analysis of squirrel cage induction motor with dual stator winding
Analysis of commutation capability of DC machines with the split throw simplex lap winding
Li, Z.-y.; Wu, X.-s.; Zhang, J.-h.
Analysis and classification of bearingless machines with symmetric 3-phase concentrated windings
Canders, Wolf-Rudiger; Hulsmann, Dennis
Advantages and Applications for Two Station Balancing Machines
Ehlers, P. A.; Institute of Electrical and Electronics Engineers; Electrical Electronics Insulation Conference
Adjustable Flux Three-Phase AC Machines With Combined Multiple-Step Star–Delta Winding Connections
Cistelecan, Mihail V; Ferreira, Fernando J T E; Popescu, Mihail
Additional steel losses from pulsations of damper winding magnetic field in synchronous machines
Kroug, A. E.; Helsinki University of Technology
Additional Losses in the Damper Winding of Large Hydrogenerators at Open-Circuit and Load Conditions
Traxler-Samek, G.; Lugand, T.; Schwery, A.
A stator winding design with unequally-sized coils for adjusting air-gap space harmonic content of induction machines
Tessarolo, A; Mezzarobba, M; Contin, A
A new sensorless torque and reactive power controller for doubly-fed machines
Chaal, Hamza; Jovanovic, Milutin
A new approach to fault detection through fault currents analysis in the delta windings of multi-winding transformers with interturn short circuits
Barbon, A.; Diaz, G.; Gomez-Aleixandre, J.
A new 4/6 pole-changing double layer winding for three phase electrical machines
Melcescu, Leonard M; Cistelecan, M V; Craiu, Ovidiu
A high-frequency method for determining winding faults in transformers and electrical machines
Florkowski, Marek; Furgał, Jakub
A Winding Function Theory Based Global Method for the Simulation of Faulty Induction Machines
Houdouin, G.; Barakat, G.; Dakyo, B.
3D analysis of circumferential and axial segmentation effect on magnet eddy current losses in permanent magnet synchronous machines with concentrated windings
Mirzaei, M; Binder, A; Deak, C
Website Policies and Important Links Comments
WorldWideScience.org is maintained by the
U.S. Department of Energy's
Office of Scientific and Technical Information as the Operating Agent
for the WorldWideScience Alliance.