Wear- and corrosion-resistant phosphate coatings in threaded oil-pipe joints
Aleshin, R. Y.
German National Library of Science and Technology (GetInfo) (German)
Vibration of threaded joints at an eigenfrequencies determined by the contact rigidity
Gecha, V. Y.; Ivanov, A. S.; Ermolaev, M. M.
Ivanov, A.; Gecha, V.; Ermolaev, M.
Use of Threaded Studs in Joints between I-Beam and R.H.S. Column
Vandegans, D.; International Association for Bridge and Structural Engineering; Turkish Group
Tribology of threaded joints and stationary contacts in aviation and space systems
Drozdov, Y. N.; Kim, S. S.
Tribology in Threaded Joints: Tightening and Loosening
Kobayashi, M.; Hongo, K.
Tribology in Threaded Joints Tightening and Loosening
Triboelectric processing of sealing materials for fixed joints in pipelines
Tribochemical nature of spontaneous unscrewing of nuts in threaded joints
Gorokhovskii, G. A.; Vasilevskii, E. T.; Timchenko, P. N.
Transient thermal stress analysis of threaded-adhesive joints applied in non-magnetic Dewar
Zhu, H.; Sun, H.; Xu, L.
Transartikuläre Verschraubung von Atlas und Axis bei chronischer Polyarthritis
Weidner, A.; Solbach, U.
Time Dependent Prestress Force of Threaded Joints in Glass Fiber Reinforced Polyamide at Elevated Temperatures
Tome, A.; Ehrenstein, G. W.; Society of Plastics Engineers
Three-Dimensional Analysis of Double Rivet-Row Lap Joints: Part II - Countersunk Rivets
Iyer, K.; Rubin, C. A.; Hahn, G. T.
Three-Dimensional Analysis of Double Rivet-Row Lap Joints: Part I - Non-Countersunk Rivets
Blaer, I. L.
Threaded Joints in Glass Fiber Reinforced Polyamide
Dratschmidt, F.; Ehrenstein, G. W.
Thermal contact of joints between different kinds of metals at low temperatures
Yano, H.; Mamiya, T.; Uchiyama, T.
The effect of process parameters and tool geometry on mechanical properties of friction stir welded aluminum butt joints
Giardini, C.; Ceretti, E.; Maccarini, G.
The Influence of Manufacturing Accuracy of Threadon the Strength of Threaded Joints
Strizhak, V.; Penkov, I.; Danube-Adria Association for Automation and Metrology
Study of the Elastoplastic Contact Characteristics of Threaded Joints of Oil Pipes with Large Dimensional Deviations
Tengjiao, L.; Renke, J.; Runfang, L.
Stress-strain state of threaded joints of thin-walled parts
Nikitin, I. A.; Kitserova, T. D.; Arkhangel'skii, V. A.
Strength investigation of threaded joints under static and dynamic loading
Standardized Tightening of Large-Diameter Threaded Joints
Zhbyr', S. I.; Vandyshev, B. A.
Standardization of Threaded Fasteners and the Reliability of Threaded Joints
Simplified calculation of threaded joints under complex loads
Bugov, A. U.; Egozhev, A. M.; Polishchuk, E. A.
Egozhev, A.; Polishchuk, E.; Bugov, A.
Shape Optimization of a Threaded Plastic Bottle-Cap Connection by FEM Based on Measured Non-Linear Material Law
Elinger, I.; Varadi, K.; ASMe; Design Engineering Division
Shakedown and Failure of the Threaded Joints under Low Cyclic Loading
Leonavicius, M.; Krenevicius, A.
Seismic Testing of Grooved and Threaded Fire Protection Joints and Correlation With NFPA Seismic Design Provisions
Antaki, G.; Guzy, D.; ASME; Pressure Vessels and Piping Division
SIF evaluation and stress analysis of drillstring threaded joints
PVP2010-25954 Determining the Maximum Allowable Working Pressure of NPT Threaded Joints
Brown, W.; American Society of Mechanical Engineers
PVP2007-26719 Study of Two-Stage Tightening of Threaded Fasteners Using Various Tool Speed Combinations
Ganeshmurthy, S.; Nassar, S.A.; American Society of Mechanical Engineers
PVP2004-2915 Seismic Capacity of Threaded, Brazed and Grooved Clamped Joints
Antaki, G.; American Society of Mechanical Engineers; Nihon Kikai Gakkai
Optimum Regimes for the Laser Strengthening of Threaded Joints Working Under Cyclic Loads
Avanesov, V. S.
On the strength and reliability of structures with threaded joints
Malikov, V. G.
On the problem of improving the methods of design and calculation of grouped threaded joints
Klyachkin, N. L.
On the Stress Concentration in the Axially Loaded Bolts for Some Threaded Joints
Cretu, A.; Lazar, I.; ASMe; Design Engineering Division
Numerical solution of the problem of the distribution of the contact forces among the turns of threaded joints
Rubin, A. M.
Non-threaded joints for domestic service functions
Modeling of Threaded Joints Using Anisotropic Elastic Continua
Segalman, D. J.; Starr, M. J.
Linear Algebra Considerations for the Multi Threaded Simulation of Mechanical Systems
Life of threaded joints under the action of variable flexural stress
Gerasimov, V. Y.; Paryshev, D. N.
Paryshev, D.; Gerasimov, V.
Influences of tool pin profile and axial force on the formation of friction stir processing zone in AA6061 aluminium alloy
Balasubramanian, V.; Elangovan, K.; Valliappan, M.
Influence of the components of initiating and inhibiting systems on the properties of anaerobic compositions
Aronovich, D.; Kartashova, T.; Murokh, A.
Increase of fatigue strength of threaded joints
Strizhak, V.; Meng, V.; VTT Valmistustekniikka
Improvement in Corrosion Resistance of Threaded Joints of Diffusive-Galvanized Tubings
Proskurkin, E. V.
Improved technique for analyzing and designing threaded joints, loaded by a separating force and an overturning moment
Ivanov, A. S.; Reshetov, D. N.
Hysteresis in threaded joints
Malyshev, A. P.
Geometrical non-linear thermal stress analysis of threaded-adhesive joints applied in non-magnetic dewar
Zhu, H.; Sun, H.; Jin, T.
Experimental assessment of the pull-out strength of single rods bonded in glulam parallel to the grain
Rossignon, A.; Espion, B.
Experimental and analytical investigation of loosening and shakedown of the threaded joints
Leonavicius, M.; Krenevicius, A.; Suksta, M.
Evolution of Design, Use and Strength Calculations of Screw Threads And Threaded Joints
Strizhak, V.; Penkov, I.; Pappel, T.
Elimination of Corrosion Phenomena in Threaded Joints
Cherenkov, S. Y.
Dissecting the nut factor Understanding the nut factor, which relates threaded-fastener torque and tension, can help engineers design more-reliable bolted joints
Diffusion of trichloroethylene through the threaded joints of PVC pipe
Jerome, K. M.; Pennsylvania State Univ., University Park, PA. Dept. of Civil Engineering
Determination of tightening parameters of threaded leak-tight joints
Izvolenskii, E. V.; Petrov, R. A.
Izvolenskii, E.; Petrov, R.
Determination of contact stresses in the fillets of loaded threaded connections in titanium pump-compressor pipes
Contact problems of threaded joints with variable fit
Check calculation of threaded joints subject to a splitting force and a tipping moment, taking account of contact pliability
Ivanov, A. S.; Baikov, B. A.; Popov, B. A.
Popov, B.; Baikov, B.; Ivanov, A.
Automation of clamping and tightening of threaded joints
Zhitnikov, Y. Z.
Analysis of loosening and shakedown of important threaded joints
Leonavicius, M.; Krenevicius, A.; Stupak, S.
Adhesive technologies in aircraft construction
Petrova, A.; Lukina, N.
A sealant for every joint: We look for an answer for permanently sealing flanges and threaded joints
A Study of Early Stage Self-Loosening of Bolted Joints
Jiang, Y.; Huang, B.; Zhao, H.
Website Policies and Important Links Comments
WorldWideScience.org is maintained by the
U.S. Department of Energy's
Office of Scientific and Technical Information as the Operating Agent
for the WorldWideScience Alliance.