Weldability of high-toughness iron - 12-percent-nickel alloys with reactive metal additions of titanium, aluminum, or niobium
Devletian, Jack H.; Stephens, Joseph R.; Witzke, Walter R.
German National Library of Science and Technology (GetInfo) (German)
Thermodynamics and phase diagrams of lead-free solder materials
Ipser, H.; Saeed, U.; Flandorfer, H.
The segregation of elements in high-refractory-content single-crystal nickel-based superalloys
Fela, F.; Caldwell, E.; Fuchs, G.
The reactive element effect; ionic processes of grain-boundary segregation and diffusion in chromium oxide scales
E A Polman; T Fransen; P J Gellings
The influence of nickel and copper on the austempering of ductile iron
Prabhakar, S.; Ray, S.; Batra, U.
The effect of ternary addition of silicon on the structure and microstructure of rapidly solidified equiatomic TiNi alloys
CHATTOPADHYAY, K; NAGARAJAN, R; ANJINI, S
The Oxidation Behavior of Y 2O 3-Dispersed β-NiAl
Pint, B. A.; Hobbs, L. W.
The Influence of 0–0.1 wt.% Ni on the Microstructure and Fluidity Length of Sn-0.7Cu- x Ni
Dahle, Arne; Nishimura, Tetsuro; Gourlay, Christopher
The Effect of Si Additions on the High-Temperature Oxidation of a Ternary Ni–10Cr–4Al Alloy in 1 ATM O 2 AT 900–1000 °C
Niu, Y.; Wu, Y.; Gesmundo, F.
The Effect of Copper and Ceria Additions on the High Temperature Oxidation of Nickel
Jackson, R.W.; Leonard, J.P.; Niewolak, L.
The 1200° C cycic oxidation behavior of two nickel-aluminum alloys (Ni3Al) and NiAl) with additions of chromium, siicon, and titanium
Lowell, Carl E.; Santoro, Gilbert J.
Temperature Dependence of the Magnetic Properties of Amorphous Fe-Me-Si-B Alloys
Hertsyk, O. M.; Kotur, B. Ya.; Bednars'ka, L. M.
Surface tension and wettability studies of liquid Fe-Ni-O alloys
Sharan, A.; Cramb, A.
Sulfur Segregation at Al 2 O 3 /γ-Νi + γ′-Ni 3 Al Interfaces: Effects of Pt, Cr and Hf Additions
Gleeson, B.; Hou, P.; Izumi, T.
Study of the surface properties of nickel-based melts by the constrained drop method: I. Surface tension
Burtsev, V.; Sidorov, V.; Rigin, V.
Solidification Characteristics and Segregation Behavior of Nickel-Base Superalloys in Dependence on Different Rhenium and Ruthenium Contents
Heckl, A.; Rettig, R.; Singer, R.F.
Solid-state contributions to densification during liquid-phase sintering
Johnson, John; German, Randall
Selectivity Control in 1,2- and 1,4-Additions of Aluminum Organyls to Carbonyl Compounds
von Zezschwitz, Paultheo
Salt roasting of suncor oil sands fly ash
Holloway, P.; Etsell, T.
Recent Advances in Metal-Catalyzed Asymmetric Conjugate Additions
Christoffers, Jens; Koripelly, Girish; Rosiak, Anna
Reactive sintering of boron-doped Ni 76Al 24 intermetallic
Morsi, K.; Moussa, S. O.
Rare‐earth La2O3 modification of laser‐clad coatings
YUNMING, ZHU; QINGBO, ZHANG; KUNLIN, WANG
Properties of the Ir 85 Nb 15 two-phase refractory superalloys with nickel additions
Yokokawa, T.; Gu, Y.; Harada, H.
Photocatalytic production of hydrogen in systems based on Cd x Zn 1– x S/Ni 0 nanostructures
Kuchmii, S.; Kotenko, I.; Raevskaya, A.
Oxidative damage effects in the copepod Tigriopus japonicus Mori experimentally exposed to nickel
Wang, Minghua; Wang, Guizhong
Oxidation of alloys in nickel-aluminum system with third-element additions of chromium, silicon, and titanium at 1100° C
Santoro, Gilbert J.; Deadmore, Daniel L.; Lowell, Carl E.
Oxidation of Ni–Al-Base Electrodeposited Composite Coatings. II: Oxidation Kinetics and Morphology at 1000°C
Marder, A. R.; Susan, D. F.
On the elemental substitutions of titanium-based hydrogen-storage alloy electrodes for rechargeable Ni–MH batteries
DOU, S. X; LIU, H. K; LUAN, B
Ni/ADM: a high activity and selectivity to C 2+ OH catalyst for catalytic conversion of synthesis gas to C 1 -C 5 mixed alcohols
Zhong, Bing; Li, Debao; Sun, Yuhan
New Generation of Modular Nucleophilic Glycine Equivalents for the General Synthesis of α-Amino Acids
Soloshonok, Vadim A.; Ueki, Hisanori; Ellis, Trevor K.
New Co-based γ-γ′ high-temperature alloys
Tsunekane, M.; Dibbern, J.; Suzuki, A.
Modified Steels for Cold-Forming U-Bolts Used In Leaf Springs Systems
Maluf, O.; Spinelli, D.; Bose Filho, W.W.B.
Mitigation of ammonia-induced SCC in a cupronickel alloy by additions of MgCl 2
Seshadari, S.; Bapat, A.; Sarin, S.
Microstructures and mechanical properties of injection molded 17-4PH stainless steel powder with nickel boride additions
Gülsoy, H.; Salman, S.
Microstructural Characterization of Superalloy 718 with Boron and Phosphorus Additions
Horton, J. A.; McKamey, C. G.; Miller, M. K.
Metallic materials for structural applications beyond nickel-based superalloys
Burk, S.; Hüttner, R.; Glatzel, U.
Metal Dusting of Fe–Cr and Fe–Ni–Cr Alloys Under Cyclic Conditions
Toh, C.H.; Young, D.J.; Munroe, P.R.
Joining of sialon ceramics by Sn–5 at % Ti based ternary active solders
Isothermal and Step Isothermal Oxidation of Copper-Containing Steels in Air at 980–1220°C
Yuen, W.; Chen, R.
Intermediate Temperature Internal Oxidation in Fourth Generation Ru-bearing Single-Crystal Nickel-base Superalloys
Evans, H.; Edmonds, I.; Broomfield, R.
Interfacial Dislocation Networks and Creep in Directional Coarsened Ru-Containing Nickel-Base Single-Crystal Superalloys
Carroll, L.J.; Feng, Q.; Pollock, T.M.
Interaction of nickel and manganese in accumulation and localization in leaves of the Ni hyperaccumulators Alyssum murale and Alyssum corsicum
Chaney, Rufus; Leigh Broadhurst, C.; Tappero, Ryan
Influence of topologically closed packed phase formation on creep rupture life of directionally solidified nickel-base superalloys
Singer, R.; Grossmann, J.; Volek, A.
Influence of the composition of the inverse micelle solution on the formation of nickel nanoparticles under the effect of γ-rays of 60 Co
Gornostaeva, S.; Fenin, A.; Ermakov, V.
Influence of microalloying and heat treatment on the kinetics of bainitic reaction in austempered ductile iron
Radulovic, B.; Pop-Tonev, K.; Asanovic, V.
Influence of V~2 O~5 additions on the resistivity and dielectric properties of nickel-zinc ferrites
Rao, B. P.; Rao, K. H.; Sankaranarayana, G.
High-pressure, high-temperature processing of low-nitrogen boron-doped diamond
Yelisseyev, A.; Zhimulev, E.; Sonin, V.
High magnetic permeability in Ni-Fe alloys
R D Enoch; A D Fudge
Hall Effects and Magnetoresistance in Some Nickel-Copper-Iron Alloys
Ehrlich, A. C.; Dreesen, J. A.; Pugh, E. M.
Gamma Prime Morphology and Creep Properties of Nickel Base Superalloys with Platinum Group Metal Additions
Van Sluytman, J.; Suzuki, A.; Bolcavage, A.
Fracture of open- and closed-cell metal foams
Raaijmakers, A.; Onck, P.; Hosson, J.
Final report - development and testing of vacuum melted nickel-molybdenum alloys with minor alloying additions
Preston, O.; Grant, N. J.; Floe, C. F.
Ferromagnetic Hall Coefficient of Nickel Alloys
Schindler, Albert I.; Salkovitz, Edward I.
Fast Internal Oxidation of Ni-Zr-Y Alloys at Low Oxygen Pressure
Wenderoth, M.; Kloss, B.; Glatzel, U.
Factors Affecting Chromium Carbide Precipitate Dissolution During Alloy Oxidation
Gleeson, B.; Young, D. J.; Durham, R. N.
Experimental determination of coexisting iron–titanium oxides in the systems FeTiAlO, FeTiAlMgO, FeTiAlMnO, and FeTiAlMgMnO at 800 and 900°C, 1–4 kbar, and relatively high oxygen fugacity
Kuehner, Scott; Scaillet, Bruno; Evans, Bernard
Enhanced coercivities in die‐upset Nd‐Fe‐B magnets with diffusion‐alloyed additives (Zn, Cu, and Ni)
Brewer, E. G.; Fuerst, C. D.
Effects of ternary additions on the thermoelastic martensitic transformation of NiAl
Oh, M.; Wee, D.; Kim, S.
Effects of silicon additions on oxidation and mechanical behavior of the nickel-base superalloy B-1900
Miner, Robert V.; Lowell, Carl E.
Effects of molybdenum additions on the structure, depth, and austenite grain size of the case of carburized 0.13% carbon steels
Ali Bepari, Md.; Shorowordi, Kazi
Effects of chloride, bromide and iodide ions on internal stress in films deposited during high speed nickel electroplating from a nickel sulfamate bath
Tsuru, Y.; Nomura, M.; Foulkes, F.R.
Effects of boric acid on hydrogen evolution and internal stress in films deposited from a nickel sulfamate bath
Nomura, M.; Foulkes, F.R.; Tsuru, Y.
Effects of beryllium additions on the oxidation of nickel aluminide and titanium aluminide based intermetallics
Hanrahan, R. J.; Chen, K. C.; Brady, M. P.
Effects of austempering temperature on fatigue crack rate propagation in a series of modified (Cu, Ni, and/or Mo) nodular irons
Torres-Acosta, A.; Martínez-Madrid, M.; Castaño, V.
Effects of Small Additions of Copper and Copper + Nickel on the Oxidation Behavior of Iron
Yin, Lan; Webler, Bryan; Sridhar, Seetharaman
Effects of Al additions on sulfidation resistance of some Fe-Cr-Ni alloys
Dunning, J. S.; Rhoads, S. C.
Effects of 0.1 wt.% Manganese, Aluminum, and Silicon on Oxidation and Copper-rich Liquid Phase Formation in an Iron–0.3 wt.% Copper–0.15 Wt.% Nickel Alloy
Sridhar, Seetharaman; Webler, Bryan
Effect of the laser fusion of electrometallized coatings of the Fe-Cr-B-Al system on their corrosion resistance
Student, M.; Pokhmurs’ka, H.; Zadorozhna, Kh.
Effect of temperature and thiosulphate on the corrosion behaviour of 90-10 copper-nickel alloys in seawater
Ezuber, Hosni M.
Effect of soluble zinc additions on the SCC performance of nickel alloys in deaerated hydrogenated water
Morton, D. S.; Thompson, C. D.; Gladding, D.
Effect of small amounts of nitrogen on properties of a Ni-based superalloy
Hu, Zhuangqi; Zhang, Yun; Huang, Xuebing
Effect of nickel on copper anode passivation in a copper sulfate solution by electrochemical impedance spectroscopy
Kipouros, G.J.; Jarjoura, G.
Effect of molybdenum and nickel additions on microstructure and mechanical properties of the As-cast and austempered ductile iron
Abouelela, Khaled Mohamed Ibrahim
Effect of minor reactive metal additions on fracture toughness iron - 12-percent-nickel alloy at -196° and 25° C
Witzke, Walter R.; Stephens, Joseph R.
Effect of manganese addition on reactive evaporation of chromium in Ni-Cr alloys
Alman, David; Holcomb, Gordon
Effect of additions of zirconium, chromium, and nickel on the structure and characteristics of superplasticity of alloys of the Al-Zn-Mg-Cu system
Levchenko, V.; Mikhailovskaya, A.; Portnoi, V.
Effect of Pt Additions on the Sulfur Segregation, Void Formation and Oxide Scale Growth of Cast Nickel Aluminides
Cadoret, Y.; Bacos, M. P.; Josso, P.
Effect of Pd, Cu, and Ni additions on the kinetics of NiCl 2 reduction by hydrogen
Stopić, S.; Ilić, I.; Uskoković, D.
Effect of PbO layers with nickel oxide and vanadium oxide additions on the thermal oxidation of InP
Mittova, I.; Samsonov, A.
Effect of Ni on vacancy concentrations and hardness in FeAl alloys
Pike, L.; Chang, Y.
Effect of Nb 2 O 5 additions on the power loss of NiZn ferrites
Rao, B.; Kim, CheolGi
Effect of Nanocrystalline Powders on the Structure and Properties of Dispersion Hardened Alloy TiC 40% KhN70Yu
Mour, J. J.; Stanskii, D. V.; Malochkin, O. V.
Effect of Cr additions on the microstructural stability of Ni electrodes in ultra-thin BaTiO 3 multilayer capacitors
Yang, Gai-Ying; Pinceloup, Pascal; Dickey, Elizabeth
Effect of Cr additions on the electrical properties of Ni–BaTiO 3 ultra-thin multilayer capacitors
Polotai, Anton; Pinceloup, Pascal; Yang, Gai-Ying
Effect of Co, Pt, and Au additions on the stability and epitaxy of NiSi2 films on (111)Si
Gas, P.; Mangelinck, D.; Pichaud, B.
Cytotoxicity study of plasma-sprayed hydroxyapatite coating on high nitrogen austenitic stainless steels
Rogero, S.; Tschiptschin, A.; Ossa, C.
Corrosion performance of NiAl intermetallic with Mo, Ga and Fe in neutral and alkaline media
Espinosa-medina, M. A.; Casales, M.; Albiter, A.
Controlling the properties of nanodimensional metal oxide powders via introduction of dispersing additions
Dzidziguri, E.; Khrustov, E.; Ryzhonkov, D.
Cold and hot deformation and densification studies on sintered Fe-C-Cr-Ni low alloy P/M steels
Chandramouli, R.; Shanmugasundaram, D.; Kandavel, T.
Cobalt and tantalum additions for enhanced electrochromic performances of nickel-based oxide thin films grown by pulsed laser deposition
Makimura, Y.; Rougier, A.; Tarascon, J. M.
Co does not replace Ni with respect to urease activity in zucchini (Cucurbita pepo convar. giromontiina) and soybean (Glycine max)
Freyermuth, S.K.; Sattelmacher, B.; Polacco, J.C.
Catalytic graphitization of hardwood acetic acid lignin with nickel acetate
Kubo, S.; Sano, Y.; Uraki, Y.
Carbon-containing single-crystal nickel-based superalloys: Segregation behavior and carbide formation
Al-Jarba, K.; Fuchs, G.
Axial additions in nickel(II) complexes of 3,14-dimethyl- 2,6,13,17-tetraazatricyclo[14,4,0^1^.^1^8,0^7^.^1^2]docosane: syntheses and crystal structures of the octahedral nickel(II) complexes
Choi, K.-Y.; Ryu, H.; Suh, I.-H.
Application of a Grain-Size-Sensitive Model to Determine the Effect of Yttrium Additions on the Oxidation of Nickel
Hsu, H. S.; Department of Energy, Washington, DC
Alloying effects on the microstructure and phase stability of Fe–Cr–Mn steels
AES study of passive films formed on a type 316 austenitic stainless‐steels in a stress field
Navaï, F.; Debbouz, O.
A castability model based on elemental solid-liquid partitioning in advanced nickel-base single-crystal superalloys
Tin, S.; Rae, C.; Hobbs, R.
A Novel Characterization Technique to Determine Pore Susceptibility of Alloying Elements in Aluminum Alloys
Vinod Kumar, G.S.; Sundarraj, Suresh
Website Policies and Important Links Comments
WorldWideScience.org is maintained by the
U.S. Department of Energy's
Office of Scientific and Technical Information as the Operating Agent
for the WorldWideScience Alliance.