Sample records for NANOTECHNOLOGIE (nanotechnology)
from WorldWideScience.org

Sample records 1 - 20 shown. Select sample records:



2

Transparent conductive oxides for coating applications

Quilitz, Mario; Oliveira, Peter William; Heusing, Sabine; Veith, Michael; INM Leibniz-Institut für Neue Materialien

Transparent, conductive oxides (TCOs) applied as coatings find multiple applications in various areas such as flat panel display setups, as electrodes in touch-screen panels, electrochromic devices, slar cells and in architectural applications for example as IR reflectors. The favored material in th...

DRIVER (German)

3

Textural properties of synthetic nano-calcite produced by hydrothermal carbonation of calcium hydroxide

Montes-Hernandez, German; Fernandez-Martinez, Alejandro; Charlet, L.; Tisserand, Delphine; Renard, F.

The hydrothermal carbonation of calcium hydroxide (Ca(OH)2) at high pressure of CO2 (initial PCO2 1/4 55 bar) and moderate to high temperature (30 and 90 1C) was used to synthesize fine particles of calcite. This method allows a high carbonation efficiency (about 95% of Ca(OH)2-CaCO3 conversion), a ...

DRIVER (German)

7

S7P6 Quality Assurance in Micro Production - Chances and Challenges

Fleischer, J.; Behrens, I.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

21

S7O2 Super Finishing of Moulding Steel for Optical Replication Techniques

Klocke, F.; Dambon, O.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

32

S6P3 Detection of Cutting Forces in Micro Machining Operations

Wulfsberg, J. P.; Brudek, G.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

36

S6P26 In-Process-Measurement of Sample Thickness changes during Grinding

Stoebener, D.; Goch, G.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

37

S6P24 Modeling and computer simulation of Rotating Electrical Discharge Machining (REDM

Kozak, J.; Gulbinowicz, Z.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

38

S6P23 Drilling of microholes in Titanium Alloy Ti-6-Al-4V

Kudla, L.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

47

S6P15 Innovative Manufacturing Process Chains for Micro Milling Tools

Uhlmann, E.; Schauer, K.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

62

S5P6 An XY scanner with minimized coupling motions for the high speed AFM

Park, J.; Moon, W.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

63

S5P5 A methodology for characterization and categorization of solutions for micro handling

Gegeckaite, A.; Hansen, H. N.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

64

S5P4 Torsional Error Motion of Simple Leaf-Spring Flexure Mechanisms

Chetwynd, D. G.; Alemohammed, A.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

65

S5P35 Grinding of Ultrasmall Milling Tools

Haberland, R.; Schmidt, K.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

67

S5P33 A large range XY flexure stage for Nanopositioning

Awtar, S.; Slocum, A. H.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

78

S5P21 Precision testing of a low cost high precision Automotive Valve

Freeman, D.; Slocum, A.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

79

S5P20 Principles and Applications of the Slow Slide Servo

Tohme, Y.; Murray, R.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

86

S5P13 Integrability of handling facilities into micro machining centers

Wulfsberg, J. P.; Kuhn, A.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

88

S5P10 CoM-SiM - Conceptual Machine Design Simplification Modeler

Bamberg, E.; Hoskere, S.; European Society for Precision Engineering and Nanotechnology
2005-01-01

German National Library of Science and Technology (GetInfo) (German)

92

Prospects in nanotechnology : toward molecular manufacturing ; proceedings of the First General Conference on Nanotechnology: Development, Applications, and Opportunities, November 11 - 14, 1992 Palo Alto, California

Foresight Institute < Palo Alto, Calif.>; General Conference on Nanotechnology: Development, Applications, and Opportunities < 1, 1992, Palo Alto, Calif.>; Foresight Conference on Molecular Nanotechnology < 3, 1993, Palo Alto, Calif.>
1995-01-01

German National Library of Science and Technology (GetInfo) (German)

94

Proceedings / Brazilian-German Workshop on Nanotechnology and Applications, Belo Horizonte, Minas Gerais, Brazil : 07.10.2009 - 08.10.2009


This Workshop Proceedings contains articles based on the ten talks given during the workshop on topics such as carbon nanomaterials, optics, electronics, as well as nanotechnology for sensors and for magnetic and biomedical applications. The German partners from Karlsruhe Institute of Technology, Fr...

DRIVER (German)

101

Large area production of optical coatings and devices by the sol-gel process

Oliveira, Peter William; Quilitz, Mario; Heusing, Sabine; Lin, Hechun; Veith, Michael; Leibniz-Institut für Neue Materialien

DRIVER (German)

102

Improvement of micro-cutting accuracy by in-process application of 3D-sensors

Schubert, A.; Eckert, U.; Schulz, B.

The German BMBF-supported joint project "3D-Mikro" [1] aims to the integration of 3D-coordinate measurement equipment into highest precision machine tools. By in-process measuring of tool geometries and workpiece structures the uncertainties resulting from multiple clamping should be eliminated or a...

DRIVER (German)

104

From instrumentation to nanotechnology : based on a series of lectures presented at the Advanced Science and Engineering Research Council Vacation School on Instrumentation and Nanotechnology held at the University of Warwick, 16 - 21 September 1990

Advanced Vacation School on Instrumentation and Nanotechnology < 1990, Coventry>; University of Warwick < Coventry>; Advanced Vacation School on Instrumentation and Nanotechnology < 1990, Coventry>
1991-01-01

German National Library of Science and Technology (GetInfo) (German)

105

BioMEMS and nanotechnology : 10 - 12 December 2003, Perth, Australia ; [conference ... was a part of SPIE 2003 Symposium on Microelectronics, MEMS, and Nanotechnology]

Conference on BioMEMS and Nanotechnology < 2003, Perth, Western Australia>; Symposium on Microelectronics, MEMS and Nanotechnology < 2003, Perth, Western Australia>; University of Western Australia < Crawley, Western Australia>
2004-01-01

German National Library of Science and Technology (GetInfo) (German)

106

Analysis of heterogeneous collaboration in the german research system with a focus on nanotechnology

Heinze, T.; Kuhlmann, S.

The German research system is functionally differentiated into various institutional pillars, most importantly the university system and the extra-university sector including institutes of the Helmholtz Association, the Max Planck Society, the Leibniz Association and the Fraunhofer Society. While th...

DRIVER (German)