Weld metal composition change during conduction mode laser welding of aluminum alloy 5182
Debroy, T.; Zhao, H.
German National Library of Science and Technology (GetInfo) (German)
Water Recovery and Bubble Surface Area Flux in Flotation
Zhang, W.; Nesset, J.E.; Finch, J.A.
Validation of a systematic approach to modeling spray quenching of aluminum alloy extrusions, composites, and continuous castings
Mudawar, I; Ehlers, S.L; Morgan, R.E
Use of recycled materials in pig-iron production at a non-integrated metallurgical plant
Lapshin, A.; Feshchenko, S.; Buev, A.
Turbulent thermal convection over rough surfaces
Pascazio, G.; Stringano, G.; Verzicco, R.
Trapped Flux in Impure Superconductive Tin
Budnick, J. I.; Lynton, E. A.; Serin, B.
Thermal and mechanical behavior of copper molds during thin-slab casting (I): Plant trial and mathematical modeling
Samarasekera, Indira; Thomas, Brian; Park, Joong
The influence of basicity on the solubility of platinum in oxide melts
Iwasawa, Kokora; Nakamura, Shigeko; Sano, Nobuo
The effect of a uniform direct current magnetic field on the stability of a stratified liquid flux/molten steel system
Cha, Pil-Ryung; Yoon, Jong-Kyu
The Role of Side Arcing in the Global Energy Partition during Vacuum Arc Remelting of INCONEL 718
Ward, R.; Shevchenko, D.
The Fluid Dynamics of Secondary Cooling Air-Mist Jets
HERNÁNDEZ C., I.; CASTILLEJOS E., A.H.; ACOSTA G., F.A.
Surface coatings for fluxless soldering of copper
Hutt, David A; Liu, Changqing
Superconducting properties of powder metallurgically processed Ti‐alloyed Nb3Sn microcomposites
Mrowiec, K.; Schaper, W.; Freyhardt, H. C.
Space-time finite elements for a simplified thermo-metallurgical problem relevant to casting
Holmström, Andreas; Runesson, Kenneth; Larsson, Fredrik
Solubility of CaF~2 in NaCl-KCl salt flux for Al-recycling and its effect on Al-loss
Milke, E.; Friedrich, B.; Sydykov, A.
Simulation of polymer removal from a powder injection molding compact by thermal debinding
Lam, Y.; Yu, S.; Shengjie, Ying
Simulation of collimated flux distributions during physical vapor deposition
Lin, Z.; Cale, T. S.; American Vacuum Society; Vacuum Metallurgy Division
Secondary Cooling in the Direct-Chill Casting of Magnesium Alloy AZ31
Wells, M.A.; Caron, E.
Scaling laws for flux pinning in hard superconductors
Kramer, Edward J.
Roles of heat transfer modes on transient cooling by quenching process
Gilles, Jérôme; Bourouga, Brahim
Removal and Recycling of Antimony from Liquid Copper by Using CuCl-CaO Fluxes at 1423 K
Hamano, Tasuku; Cui, Yang; Tsukihashi, Fumitaka
Removal Of Boron From Metallurgical-Grade Silicon By Applying CaO-Based Flux Treatment
Tanahashi, M.; Nakahigashi, H.; Takeda, K.
Relation between cooling rates and microstructures in gravity-die-cast AZ91D disks
Avishei, A.; Bamberger, M.
Quantitative analysis of the relative basicity of CaO and BaO by silver solubility in slags
Park, Joo; Min, Dong
Professor Jan Evetts in memoriam
David Dew-Hughes, Archie Campbell and Bartek Glowacki
Production of Coatings from Powder Materials with the Use of a Short Argon Arc. 2. Heat Flux from the Plasma to a Macroparticle
Smyaglikov, I. P.; Khodyko, Yu. V.; Shimanovich, V. D.
Production of Coatings from Powder Materials with the Use of a Short Argon Arc. 1. Experimental Study of Plasma Heating of Macroparticles
Zolotovskii, A. I.; Smyaglikov, I. P.; Shimanovich, V. D.
Proceedings of the Second International Symposium on Metallurgical Slags and Fluxes : ... held at the Fall Extractive and Process Metallurgy Meeting, November 11 - 14, 1984, Lake Tahoe, Nevada
International Symposium on Metallurgical Slags and Fluxes < 2, 1984>; Extractive and Process Metallurgy Meeting < 1984>; Metallurgical Society < United States> / Physical Chemistry Committee
Powder metallurgy processing of CrCoFe permanent magnet alloys containing 5-25 wt. % Co
Green, M. L.; Wong, C. C.; Sherwood, R. C.
Phase transformations in superconducting Ti-Nb alloys
B A Hatt; V G Rivlin
Numerical Investigation of the Injection of Dust and Fine Flux Materials into the Blast Furnace
de Castro, J.A.; Nogami, H.; da Silva, A.J.
Non Destructive Testing along the Manufacture of high Heat Flux Components for the Nuclear Fusion Experiment Wendelstein 7-X
Schedler, B.; Traxler, H.; Zabernig, A.
NanoFlux — doping of solder pastes
Zerrer, P.; Fix, A.; Hutter, M.
Modeling the formation of longitudinal facial cracks during continuous casting of hypoperitectic steel
Konishi, J.; Militzer, M.; Samarasekera, I.
Modeling the Interdiffusion and Reactive-Diffusion Processes in Multicomponent Systems
Wierzba, Bartlomiej; Danielewski, Marek
Modeling of interdendritic strain and macrosegregation for dendritic solidification processes: Part II. Computation of interdendritic strain and segregation fields in steel ingots
Modeling of interdendritic strain and macrosegregation for dendritic solidification processes: Part I. Theory and experiments
Mn-Al-C for permanent magnets (invited)
Wise, J. H.; Bohlmann, M. A.; Koo, J. C.
Microstructure of TiB 2 /carbon steel surface-alloyed materials fabricated by high-energy electron beam irradiation
Shin, Keesam; Euh, Kwangjun; Lee, Sunghak
Microstructure and Microtexture Formation of AZ91D Magnesium Alloys Solidified in a Static Magnetic Field
Tamura, Takuya; Miwa, Kenji; Li, Mingjun
Microstructural phenomena associated with micrometeoroid impact craters in aluminum and stainless steel
Manuel, D.; Murr, L.; Birudavolu, R.
Microstructural Modification and property improvement of boride/Ti-6Al-4V surface-alloyed materials fabricated by high-energy electron-beam irradiation
Lee, Sunghak; Euh, Kwangjun; Lee, Jongmin
Mechanism of explaining liquid friction and flux consumption during non-sinusoidal oscillation in slab continuous casting mould
Meng, X.N.; Zhu, M.Y.
Mechanism and optimization of oxide fluxes for deep penetration in gas tungsten arc welding
Sugiyama, Hiroyuki; Fujii, Hidetoshi; Nogi, Kiyoshi
Mechanism and Microstructure of Oxide Fluxes for Gas Tungsten Arc Welding of Magnesium Alloy
Zhang, Z.; Song, G.; Wang, L.
Measurements, simulations, and analyses of instantaneous heat fluxes from solidifying steels to the surfaces of twin roll casters and of aluminum to plasma-coated metal substrates
Kim, J.; Tavares, R.; Isac, M.
Mathematical modeling of copper and brass upcasting
Miettinen, J.; Härkki, K.
Mathematical Modeling of Surface Heat Flux During Quenching
Babu, K.; Prasanna Kumar, T.S.
Liquid film dryout model for predicting critical heat flux in annular two-phase flow
Qiu, Li-min; Jiao, Bo; Gan, Zhi-hua
Lead-free Sn-Ag and Sn-Ag-Bi solder powders prepared by mechanical alloying
Lai, H.; Duh, J.
Internal displacement reactions in multicomponent oxides: Part III. Solid solutions of ternary oxide compounds
Internal displacement reactions in multicomponent oxides: Part II. Oxide solid solutions of wide composition range
Reddy, S.; Wiggins, L.; Jacob, K.
Interfacial tension between aluminum and NaCl-KCl-based salt systems
Utigard, Torstein; Roy, Raja
Interface stability during displacement reactions between Cu 2 O and Co 1− X Fe X alloys at 1223 K
Reddy, S.; Wiggins, L.
Interdiffusion structures and paths for multiphase Fe-Ni-Al diffusion couples at 1000 °C
Dayananda, M.; Puccio, A.; Sohn, Y.
Interactions between Magnetite Oxidation and Flux Calcination during Iron Ore Pellet Induration
Firth, Andrew; Garden, John
Interaction of metallurgical treatment and flux pinning of NbTi superconductors
Influence of the filler materials on flux-free brazing of pure aluminium (1050)
Bobzin, Kirsten; Warda, Thomas; Schlaefer, Thomas
Influence of Straight Nozzles on Fluid Flow in Mold and Billet Quality
Garcia-Hernandez, S.; Najera-Bastida, A.; Torres-Alonso, E.
Improvement of the hardness and wear resistance of (TiC, TiN)/Ti-6Al-4V surface-alloyed materials fabricated by high-energy electron-beam irradiation
Lee, Sunghak; Golkovski, Mikhail; Oh, Jun
Heat-transfer and solidification model of continuous slab casting: CON1D
Meng, Ya; Thomas, Brian
Fluxless plasma bumping of lead-free solders and the reliability effects of under bump metallization thickness
Jung, Jae Pil; Moon, Joon Kwon; Zhou, Y
Experimental difficulties associated with permeability measurements in aluminum alloys
Arnberg, Lars; Nielsen, Øyvind
Estimation of multiple heat-flux components at the metal/mold interface in bar and plate aluminum alloy castings
Kamath, H.; Kumar, T.
Epitaxial growth of Fe-Si compounds on the silicon (111) face
Vinh, Le Thanh; Chevrier, J.; Derrien, J.
Enhancement of jc at 10-12 T in Nb3Sn wires by artificial Ta inclusions distributed at a nanometre scale
M Klemm; E Seibt; W Specking
Effects of Ar pressure on ion flux energy distribution and ion fraction in r.f.-plasma-assisted magnetron sputtering
Kusano, E.; Fukushima, K.; Saitoh, T.
Effect of subsurface thermocouple installation on the discrepancy of the measured thermal history and predicted surface heat flux during a quench operation
Li, D.; Wells, M.
Effect of flux addition on the microstructure and hardness of TiC-reinforced ferrous surface composite layers fabricated by high-energy electron beam irradiation
Kwon, Soon-Ju; Lee, Sunghak; Choo, Seong-Hun
Discussion of Continuous Casting Mold Flux Requirements and Development for Thin Slab Casting
Camino, C.; Phillips, R.; CIM
Diffusion studies in the β (B 2 ), β′ (bcc), and γ (fcc) Fe-Ni-Al alloys at 1000 °C
Sohn, Y.; Dayananda, M.
Diffusion Kinetics of Oxygen in β -Titanium Measured by Molten Flux Method
Song, Min; Park, Joo; Choi, Good
Development of an experimental system for the study of the effects of electromagnetic stirring on mold heat transfer
Liu, Jun-Jiang; Yin, He-Bi; Fang, Da-Cheng
Desulfurization behavior of molten copper alloy by a soda ash
Correlation of microstructure with hardness and wear resistance in (TiC,SiC)/stainless steel surface composites fabricated by high-energy electron-beam irradiation
Kim, Yong; Kim, Nack; Yun, Eunsub
Correlation of microstructure with hardness and wear resistance in (TiC, SiC)/stainless steel surface composites fabricated by high-energy electron-beam irradiation
Yun, Eunsub; Kim, Nack; Kim, Yong
Copper removal from carbon-saturated molten iron with Al 2 S 3 -FeS flux
Fukaya, Yuichi; Shimpo, Ryokichi; Ogawa, Osamu
Complete collection of minority carriers from the inversion layer in induced junction diodes
Schaefer, A. Russell; Geist, Jon; Liang, Eli
Charaterization of Mold Flux Performance
Zinni, M.; Johnson, D.; Hiembach, H.
Analysis of thin-slab casting by the compact-strip process: Part I. Heat extraction and solidification
Herrera G., M.; Gutiérrez M., E.; Acosta G., F.
An examination of mould flux film structures and mould gap behaviour using mould thermal monitoring and petrographic analysis at Armco's Mansfield operations
O'Malley, R. J.; Neal, J.
An electronic coercivitimeter for amorphous ribbon toroids
Overshott, K. J.; Price, M. H.; Couroumalos, C.
An electromigration model that includes the effects of microstructure and temperature on mass transport
Fu, K. Y.; Varker, C. J.; Dreyer, M. L.
An analysis of the efficiency gained with replacement of the traditional lining of bell and chamber metallurgical furnaces by lining made of refractory ceramic fiber
Absorption in a paraboloid of revolution-shaped welding or drilling cavity irradiated by a polarized laser beam
Ho, C.; Wei, P.
A novel technique for manufacturing metal-bonded Nd-Fe-B magnets by squeeze casting
Chao, Chuenguang; Ji, Jun-Fa
A mathematical model of gas tungsten arc welding considering the cathode and the free surface of the weld pool
Kim, W.; Na, S.; Fan, H.
A dedication to Professor Jan Evetts
Harald Weber, David Dew-Hughes, Archie Campbell, Zoe Barber, Rob Somekh and Bartek Glowacki
A Study of the Crystallization Behavior of a New Mold Flux Used in the Casting of Transformation-Induced-Plasticity Steels
Cramb, Alan; Blazek, Kenneth; Wang, Wanlin
A Mold Flux for Slab Caster under High Speed Operation
Changsuo, X.; Guoling, Z.; Mei, H.
Flux-free brazing of Mg-containing aluminium alloys by means of cold spraying
Ernst, Felix; Bobzin, Kirsten; Zhao, Lidong
Website Policies and Important Links Comments
WorldWideScience.org is maintained by the
U.S. Department of Energy's
Office of Scientific and Technical Information as the Operating Agent
for the WorldWideScience Alliance.