Wpływ błędów odwzorowania wnęki formy na dokładność wymiarową odlewów = Vlijanie ošibok otobraženija polosti formy na točnostʹ razmerov otlivok Influence of errors in representation mould cavity on dimensional accuracy of castings
German National Library of Science and Technology (GetInfo) (German)
Vapor Degreaser Replacement for Removing Fluorescent Penetrants from Aerospace Castings
Peres, C.; American Electroplaters and Surface Finishers Society
Using Stress Simulation to Tackle Distortion and Cracking in Castings
Egner-Walter, A.; Olive, S.; Institute of Cast Metals Engineers
Using Metal Matrix Composite Castings
Weiss, D.; The Minerals, Metals & Materials Society (TMS)
The integral method of acoustic diagnostics of iron castings
Ignatov, V.; Maslov, G.; Bugaiskii, V.
The compound moulding sand used for high manganese steel castings
Zhang, C.; Zhou, J.
The Water Soluble Salt for Castings from Aluminium Alloys
Holecek, S.; Prazak, M.; Procio, M.
The New Facility at Precision Disc Castings Limited
MacNaughton, M.; Casting Development Centre
The Intelligent Casting Production: How to Use Automation to Improve the Economics of Near Net Shape Castings
Holmen, K.; Institute of Cast Metals Engineers
The GTAW of Ti-6Al-4V castings and its effect on microstructural and mechanical properties
Ault, James; Veeck, Stewart; Pillers, James
The Filtration of Large Grey and Ductile Iron Castings
Wiese, E.; Institute of Cast Metals Engineers
The Effects of HIP on Bifilms in Aluminium Castings
Staley, J.; Institute of Cast Metals Engineers
Study of the effect of carbon on the structure, mechanical properties, and nature of failure for the metal of steel Kh25N20S2 castings
Utkin, Yu.; Oryshchenko, A.
Study of the Occurrence and Suppression of Metal Reoxidation in Ferrous Castings
Elbel, T.; Senberger, J.; Zadera, A.
Study of an expert system for defect analysis in SG iron castings
Xiong, S.; Liu, B.
Semi-Solid Metal Casting Practices: Past, Present and Future
Brown, Z.; DasGupta, R.; Killingsworth, D.
Selection of Initial Mold–Metal Interface Heat Transfer Coefficient Values in Casting Simulations—a Sensitivity Analysis
Sundarraj, Suresh; Nayak, Ramesh
Segregation band formation in Al-Si die castings
Gourlay, Christopher; Laukli, Hans; Dahle, Arne
Robot Based Oxy-Fuel Cutting and Stub-Grinding for Castings in Low Series
Lauwers, B.; De Baerdemaeker, H.; Haigh, P.
Recommended Procedure for the welding of steel castings by the metal-arc process
The British Steel Castings Research Ass.
Prototype Castings of Aluminum - Fly Ash Composites for Industrial Application
Rohatgi, P. K.; Agrawal, A.; Weiss, D.
Prof. John Campbell’s ten rules for making reliable castings
Production of shaped castings and consumable electrodes from titanium alloys for aircraft engines
Ivchenko, Z.; Lunev, V.
Production of shaped CFR metal-composite castings
Skam'Yanova, T. Y.; Lipchin, T. N.
Production of iron castings on an intermittent metal mold conveyer
Ermikov, Y. I.; Poddubnyi, A. N.; Silaev, A. L.
Production of Ductile Iron Castings in Green Sand Molds Without Feeders
Sillen, R.; Institute of Cast Metals Engineers
Process Development for Highly Stressed Aluminium Castings Under Consideration of the Increase in Performance of the Diesel Engines
Mnich, F.; Saewert, H.C.; Tamez, A.
Proceedings of the American Foundry Society International Conference on High Integrity Light Metal Castings : October 31 - November 1, 2005, Indianapolis, Indiana, Holiday Inn Select Airport
International Conference on High Integrity Light Metal Castings < 2005, Indianapolis, Ind.>; American Foundry Society
Problems of producing more precisely dimensioned castings and reducing the molten metal consumption index
Volkomich, A. A.; Kovalev, F. I.; Trukhov, A. P.
Prevention of defects in castings using back propagation neural networks
Karunakar, D.; Datta, G.
Prediction of solidification time during solidification of aluminum base alloy castings cast in CO 2 -sand mold
Radhakrishna, K.; Kulkarni, S.
Partial automation of the external and internal grinding of large castings by means of interactive master-slave robots
Fischer, U.; Ahlbehrendt, N.
Non-Ferrous Alloys Precision Castings Production
No: 80 Foundry Technology Processing in a Network of Foundry Process - Supplier - Research - Customer - End User, on Example of Heavy Steel Castings
Hanus, R.; Kolenz, F.; Buberl, A.
No: 57 Microstructures and Mechanical Properties of CP Titanium and Ti-6Al-4V Alloy Castings Cast by Metal Mold in Vaccum ARC Remelting Process
Lim, S.-C.; Kim, M.-Y.; Jung, T.-K.
No: 47 The Semi-Full Mold Process for Stainless Steel Castings
Fukuda, Y.; Hayashi, K.; Fukuo, T.
No: 27 Thermal and Technological Features of Manufacturing of Large Dimension Aluminum Castings in a Permanent Moulds
Melnikov, A.P.; Sadokha, M.A.; Bondarik, N.E.
No: 179 Process Control Methods for Production of Castings in Compacted Graphite Iron Production of Castings in Compacted Graphite Iron
No 138 Factors Affecting the Mechanical Properties of Lightweight Ductile Iron Castings
Stefanescu, D.M.; Torrance, J.; Dix, L.P.
Migration of crystals during the filling of semi-solid castings
Dahle, A.; Laukli, H.; Gourlay, C.
Laukli, H.; Gourlay, C.; Dahle, A.
Metals Engineering 96 Conference : Metals Engineering Event; [National Exhibition Centre, Birmingham, 24 - 26 September 1996] ; Session 3: Metal finishing operations : Tuesday 24 September
Metals Engineering Conference < 1996, Birmingham>; Confederation of British Forgers; British Cold Forging Group
Metal dispensing problems in castings production in rotor units
Kasprevich, V. N.; Kovalenko, Y. E.
Metal Castings' Secret Ingredient
Sorenson, W.W.; Institute of Cast Metals Engineers
Measurement of thermophysical properties of metallic melts for high quality castings
Fecht, H. J.; Meier, M.; Wunderlich, R.
Manufacture and properties of EPS patterns and their influence on the quality of lost-foam aluminium castings
Busse, M.; Fahrig, H. M.; Hahn, O.
Iron castings engineering handbook
Goodrich, George M.
Integrated training for aluminium foundry metal melting and casting operators
Roughton, J. T.; British Cast Iron Research Association
I-20 Die Casting - An Important Production Process for High-Quality Light Alloy Castings
I-19 Aluminium Castings - Past, Present and Future
I-18 Modeling of Microstructure and Defect Formation in Castings
I-08 Floating Castings in a Global World Market
Archibald, J.J.; Kirgin, K.
High-performance castings : a technical guide
Bradley, Elihu F.
High Integrity Castings : Proceedings of the Conference held in conjunction with the 1988 World Materials Congress
ASM International, Materials Science Division, Materials Processing Committee
Heat Treatment of Large Castings from Steel 15Kh3M1FTsL
Borisov, I. A.
HIPing - A Potent Post Casting Treatment for High Integrity Aluminium Castings
Pillai, R.M.; Institute of Cast Metals Engineers
Formation and Behavior of the Contact Zone in Bimetallic Castings from Stainless Steel CSN 417246 and Cast Iron CSN 422303
Liptakova, T.; Chalupova, M.; Skocovsky, P.
Forgins and Castings of Cr16Ni5 Steel for Power Engineering
Barta, J.; Korcak, A.; Molinek, B.
Foamed metal castings
Tutubalin, A. V.
Foamed aluminium cores for aluminium castings
Hopler, T.; Schorghuber, F.; Simancik, F.
European Market with Castings and Czech Foundry Industry
Eliminating the annealing of metal mold castings
Golotenkov, O. N.; Gus'kov, V. P.; Utyushev, S. L.
Effects of the entrained surface film on the reliability of castings
Mi, J.; Harding, R.; Campbell, J.
Effect of chemical composition on the strength of large castings from gray iron
Eddy current separators and their application in non-ferrous metal foundries
Dobney, S. J.; British Cast Iron Research Association
Dross and inclusions in iron and steel castings
Monroe, R. W.; Blair, M.; Bates, C. E.
Directional solidification of large superalloy castings with radiation and liquid-metal cooling: A comparative assessment
Elliott, A.; Tin, S.; King, W.
Die Castings Reinforced with Nickel-coated Fibre
Stephenson, T. F.; Bell, J. A. E.; CIM; Metallurgical Society; Materials Engineering Section
Developments in the Design of Steel Castings
Blair, M.; Monroe, R.W.; Institute of Cast Metals Engineers
Development of clad boiler tubes extruded from bimetallic centrifugal castings
Bakker, W.; Sponseller, D.; Timmons, G.
Development of a 4000 Ton Horizontal Cold Chamber Machine for the Production of Aluminum and Magnesium Castings
Geier, R.; International Magnesium Association
Crystallization Processes, Structure and Properties of Castings from High‐Temperature Nickel Alloys
Zhemanyuk, P. D.; Lunev, V. V.; Tsivirko, É. I.
Conversion of RP models to investment castings
Dickens, P.M.; Wimpenny, D; Hon, K.K.B.
Comparisons of the Effects of Air and Helium on Heat Transfer at the Metal-Mold Interface
Carletti, Horazio; Argyropoulos, Stavros
Chunky Graphite in Ductile Iron Castings
Kallbom, R.; Institute of Cast Metals Engineers
Castings practice : the 10 rules of castings
Castings Under Viewpoint
Kennedy, M.; Institute of Cast Metals Engineers
Cast Metal Matrix Composites
Case-based retrieval of 3-dimensional shapes for the design of metal castings
Knight, Brian; Mileman, Tony; Ewer, J.
BCIRA abstracts of international literature on metal castings production
British Cast Iron Research Association
Automatic Visual 3-D Inspection of Castings
Stein, D.v.; Institute of Cast Metals Engineers
Anodizing of Castings
Rasmussen, J.; American Electroplaters and Surface Finishers Society
Aluminum Composite Castings Incorporating Used and Virgin Foundry Sand as Particle Reinforcements
Belger, M. A.; Rohatgi, P. K.; Gupta, N.
Aluminium castings conference; Design and manufacture in new world markets
Institute of British Foundrymen; British Metal Casting Association; Aluminium Federation Ltd
Advances in the Melting of High Quality Grey Iron Automotive Castings at Precision Disc Castings
Macnaughtan, M.P.; Eggleston, D.; Richardson, N.
Advances in lightweight automotive castings and wrought aluminum alloys : [held during SAE 2004 world congress, Cobo Center, Detroit, Michigan, USA, March 8 - 11, 2004]
Accurate and Complex NET-SHAPE Castings for Challenging Markets
Horacek, M.; Cilecek, J.; Institute of Cast Metals Engineers
A correlation to describe interfacial heat transfer during solidification simulation and its use in the optimal feeding design of castings
Ransing, R.; Lewis, R.
A comparison of the squeeze casting and investment casting processes for the production of an aluminium alloy metal matrix composite
Lim, C. S.; Clegg, A. J.; British Cast Iron Research Association
A Study of Castings from Commercial Steels 15Kh3M1FL and 15Kh3M1FTsL
Bugaev, A.; Borisov, I.
A Fatigue Prediction Methodology for Aluminium Castings that Incorporates NDI Assessment
Dixon, G.; Beijing Institute of Aeronautical Materials; Institute of Metal Research
2005-01-1689 Design of Aluminum Metal Matrix Components for Casting
Weiss, D.; Society of Automotive Engineers
2003-01-0435 Controlling Die Temperature to Fill Extremely Thin Walled Semi-Solid Metal Castings
Midson, S. P.; Gabis, O.; Society of Automotive Engineers
2002-01-0916 Economical Semi Solid Metal (SSM) Processing of Automotive Components
Jorstad, J. L.; Society of Automotive Engineers
"The industries of the future approach in the US metal casting industry"
Monroe, R.; Institute of British Foundrymen; Castings Development Centre
Website Policies and Important Links Comments
WorldWideScience.org is maintained by the
U.S. Department of Energy's
Office of Scientific and Technical Information as the Operating Agent
for the WorldWideScience Alliance.