Viscous effects on deformation of kaolin clay in drained 1D compression with cyclic loading
Deng, Jian-liang; Tatsuoka, F.; Zhang, Xiang-xia
German National Library of Science and Technology (GetInfo) (German)
Unusual response of materials with microspores under high rate loading at the atomic level
Dmitriev, A. I.; Psakhie, S. G.
The problem of obtaining dense and strong compacts in explosive loading of powders
Deribas, A. A.
The loading history and crystal orientation effects on the size-dependency of single crystal diamond properties
Chen, Zhen; Shen, Luming
The Influence of the Cyclic Loading Rate on the Plastic Zone Depth in VNS-25 Alloy
Matokhnyuk, L. E.; Yakovleva, T. Yu.
The Effect of Mechanical Loading on the MyHC Synthesis Rate and Composition in Rat Plantaris Muscle
Pehme, A.; Alev, K.; Kaasik, P.
The rate dependency of concrete in tension - New data for wet, normal and dry conditions
Weerheijm, J.; Vegt, I.; van Breugel, K.
Tensile strength of dried mortar over a wide range of strain rate
Erzar, B.; Buzaud, E.; Forquin, P.
Studies on high strain-rate behavior of materials by using a new method combining HPB technique with Lagrangian analysis
Wang, L.; Lai, H.; Zhu, J.
Strain-rate - Temperature superposition behavior of Polymethylene Diisocyanate (PMDI) based rigid Polyurethane foams with different densities
Song, B.; Lu, W.-Y.; Chen, W.
Strain induced martensitic transformation at high strain rate in two austenitic stainless steels
Nanga, S.; Pineau, A.; Tanguy, B.
Strain rate-dependent shear band behavior in bulk metallic glasses
Jiang, M.Q.; Dai, L.H.
Strain rate effects on the mechanical properties of high-purity alpha -titanium
Nixon, M.E.; Cazacu, O.; House, J.
Strain rate dependence of dynamic flow stress of 7075 aluminium alloy at very high strain rates
Strain rate dependence of a super-elastic NiTi alloy
Siviour, C.R.; Huber, J.E.; Normanton, T.
Strain rate dependence of Ti64: Characterisation of mechanical properties up to failure using novel optical techniques
Arthington, M.; Siviour, C.; Petrinic, N.
Strain rate and temperature effects on stress-strain behaviour of cast high alloyed CrMnNi-steel
Kruger, L.; Wolf, S.; Martin, U.
Strain Rate and Temperature Effects on the Non Linear Behaviour and the Damage Process Induced by Tensile Loading within RTPMMA
Ibouchichene-Aiche, Y.; Lataillade, J.-L.
Strain Rate Dependent Deformation and Fracture of Titanium Alloy Cylinders Under Explosive Loading Conditions
Reid, W. D.; Institution of Engineers, Australia; National Committee for Applied Mechanics
Spall strengths of silicon carbides under shock loading
Dandekar, D. P.; Bartkowski, P. T.
Skeletal Adaptation to Mechanical Loading
Shock-wave loading influence on chemical reactions running in hematite using cumulative systems
Shorokhov, E. V.; Yermakov, A. Y.; Buzanov, V. I.
Response of moist sand to high rate loading
Martin, B.; Chen, W.
Resistance Against the Intrinsic Rate of Fracture Mechanics Parameters for Polymeric Materials Under Moderate Impact Loading
Lach, R.; Seidler, S.; Grellmann, W.
Relationship between diameter of split Hopkinson pressure bar and minimum loading rate under rock failure
Ye, Zhou-yuan; Li, Xi-bing; Hong, Liang
Properties of phenol-removal aerobic granules during normal operation and shock loading
Tay, Joo-Hwa; Maszenan, Abdul; Zhao, Zhi-Wei
Pressure drop and heat transfer of catalyzed diesel particulate filters due to changes in soot loading and flow rate
Kim, D.; Cho, Y.; Park, Y.
Plastic and genetic variation in wing loading as a function of temperature within and among parallel clines in Drosophila subobscura
Gilchrist, G. W.; Huey, R. B.; Society for Integrative and Comparative Biology
Optimal biocatalyst loading in a fixed bed
DeLancey, G.; Tortoriello, V.
Oblique shock loading of copper rods with different grain sizes
Sanchez, J. C.; Staudhammer, K. P.; Murr, L. E.
Nutrient Removal and Loading Rate Analysis of Louisiana Forested Wetlands Assimilating Treated Municipal Effluent
Day, Jason; Lindsey, Joel; Hunter, Rachael
Numerical simulation study of the strain rate effect on concrete in compression considering material heterogeneity
Lu, Y.; Song, Z.H.; Tu, Z.G.
Numerical analysis of dynamic behavior of RC slabs under blast loading
Li, Zhongxian; Du, Hao
Molecular dynamic simulation of thermodynamic and mechanical properties and behaviour of Be when high-rate straining
Dremov, V.; Karavaev, A.; Sapozhnikov, F.
Mechanisms of high-strain-rate deformation and fracture of fine-grained unalloyed uranium upon explosive loading
Kozlov, E.; Novgorodtsev, S.; Bondarchuk, S.
Loading Rate Dependence of the Deformation and Fracture Mechanisms in Impact Modified Poly(Methyl Methacrylate)
Beguelin, P.; Kausch, H. H.
Loading Rate Dependence of Mode II Fracture Behavior in Interleaved Carbon Fibre/Epoxy Composite Laminates
Mai, Yiu-Wing; Kim, J. K.; Tsang, F. F. Y.
Large plastic shear deformation of thin steel plates at impulsive blast loading
Guerke, G. H.
Investigation of structural changes in amorphous metal alloys under shock-wave loading
Kirko, V. I.
Investigation into the long-term strength of rocks under loading with a constant rate
Intermediate strain rate characterization of a plastic-bonded explosive composition
Picart, D.; Biessy, M.; Brigolle, J.L.
Instantaneous strain rate sensitivity of metastable austenitic stainless steel
Isakov, M.; Kuokkala, V.-T.; Ruoppa, R.
Influence of loading rate on concrete cone failure
Meštrović, D.; Rah, K.; Ožbolt, J.
In Vitro Model of Characterizing the Effects of Compressive Loading on Proteoglycans in Anatomically Intact Articular Cartilage
Müller, G.; Hanschke, M.
Impact energy absorption of metal foam with controlled microstructure under dynamic loading
Kanahashi, H.; Mukai, T.; Yamada, Y.
High-rate deformation of a niobium single crystal under loading by spherical converging shock waves
Dobromyslov, A.V.; Taluts, N.I.; Kozlov, E.A.
High strain-rate tensile behavior of pig bones
Parish, A.; Chen, W.; Weerasooriya, T.
High strain rate response of epoxy in tensile and shear loading
Gilat, A.; Goldberg, R. K.; Roberts, G. D.
High strain rate delamination of glass fibre reinforced polymers using a Hopkinson bar configured for spalling
Govender, R.; Louca, L.; Pullen, A.
High strain rate bulge testing of a DP450 steel using a nylon SHPB system
Grolleau, V.; Mohr, D.; Penin, A.
High rate mechanical properties of Dyneema in compression
Walley, S.M.; Chapman, D.J.; Williamson, D.M.
Groundwater vulnerability assessment by determining maximum contaminant loading limit in the vicinity of pumping wells
Bae, Gwang-Ok; Lim, Joung-Won; Lee, Kang-Kun
Full-field strain measurements at high rate on notched composites tested with a tensile Hopkinson bar
Moulart, R.; Pierron, F.; Hallett, S.R.
Frequency-dependent enhancement of bone formation in murine tibiae and femora with knee loading
Tanaka, Shigeo M.; Turner, Charles H.; Zhang, Ping
Fatigue-Crack Propagation in Heat-Resistant Alloys under Thermomechanical Loading. Part 2. A Method of Accounting for the Influence of Thermomechanical Loading on the Material Resistance to Fatigue-Crack Growth
Kononuchenko, O. V.; Gryaznov, B. A.; Troshchenko, V. T.
Fatigue damage of quasi-isotropic composite laminates under tensile loading in different directions
Kim, In-Kweon; Han, Kyung-Seop; Kong, Chang-Duk
Experimental study of structural magnesium alloys with high absorption energy under dynamic loading
Mukai, T.; Aizawa, T.; Higashi, K.
Experimental investigation of the behavior of pile groups in sand under different loading rates
Experimental characterisation of the strain rate dependent failure and damage behaviour of 3D composites
Gerlach, R.; Siviour, C.R.; Petrinic, N.
Experimental and numerical study of the response of a woven glass/epoxy 7781 composite on the planar impact loading
Tzubery, R.; deBotton, G.; Zaretsky, E.
Experimental and numerical analysis of high strain rate response of Ti-6Al-4V titanium alloy
Bragov, A.; Konstantinov, A.; Lomunov, A.
Experimental Investigation of Dynamically Loaded Bolted Joints in Carbon Fibre Composite Structures
Pearce, Garth; Kelly, Donald; Thomson, Rodney
Evolution of the metal microstructure and conditions of strain localization under high-strain-rate loading
Bondar’, M.; Merzhievskii, L.
Effects of loading rate, notch geometry and loading mode on the local cleavage fracture stress of a C–Mn steel
Wang, Y.; Wang, G.
Effects of Feed Time, Organic Loading and Shock Loads in Anaerobic Whey Treatment by an AnSBBR with Circulation
Ratusznei, Suzana; Bezerra Jr., Roberto; Rodrigues, José
Effect of the loading rate on the strength of self-bonded silicon carbide ceramic materials
Shestakov, S.; Kushch, V.; Zubov, V.
Effect of the dynamic loading rate on the failure of bulk metallic glasses
Couque, H.; Champion, Y.; Nowak, S.
Effect of strain rate on the mechanical properties of biodegradable polymer blends
Kobayashi, S.; Ogihara, S.
Effect of organic loading rate on the performance of an up-flow anaerobic sludge blanket reactor treating olive mill effluent
Tutuk, Fatih; Azbar, Nuri; Keskin, Tugba
Effect of loading rate on fracture characteristics of rock
Qian, Qi-hu; Yang, Hai-qing; Zhou, Xiao-ping
Effect of loading rate on dynamic fracture initiation toughness of brittle materials
Chao, Y.; Kim, Y.
Effect of flexion angle and rate of loading on appearance of ruptured anterior cruciate ligaments
Azangwe, G.; Mathias, K. J.; Marshall, D.
Effect of Loading Rate and Loading Path on Hysteresis Response of R/C Framed Shearwalls
Esaki, F.; Ono, M.
Effect of Deformation Rate on the Strength and Deformability of Alloys at 4.2 K
Vorob'ev, E. V.
Dynamic tests on a cohesive and frictional material. Influence of high pressure and high strain rate on compaction and shear
Bailly, P.; Delvare, F.; Biessy, M.
Dynamic response and failure behavior of rock under static-dynamic loading
Ma, Chun-de; Chen, Feng; Xu, Ji-cheng
Dynamic material behavior under biaxial loading
Meyer, L. W.; Hahn, F.
Dynamic loading of porous materials: potential and restrictions for novel materials applications
Nesterenko, V. F.
Dislocation Structure of VT22 Titanium Alloy in Cyclic Loading with Various Loading Frequencies
Yakovleva, T. Yu.
Development of a strain-rate dependent progressive damage model for crash analysis of composite laminates
Shokrieh, M.M.; Jamal, M.O.
Development and field trial of a household surface lead loading rate sampling device in a lead-contaminated community of southern Thailand
Geater, Alan; Chongsuvivatwong, Virasakdi; Untimanon, Orrapan
Design of an Impact Loading Machine Based on a Flywheel Device: Application to the Fatigue Resistance of the High Rate Pre-straining Sensitivity of Aluminium Alloys
Froustey, C.; Lataillade, J.; Lambert, M.
Constraint Loss under Dynamic Loading in Rate Independent Plastic Solids
Jayadevan, K.R.; Ramamurthy, T.S.; Narasimhan, R.
Concrete Response to High Strain Rate Tensile Loading
Brara, A.; Klepaczko, J. R.
Comparison of low and high strain rate deformation mechanisms and texture evolution for a textured Ti6Al4V alloy
Coghe, F.; Tirry, W.; Rabet, L.
Catastrophe model and its experimental verification of static loading rock system under impact load
Zhang, Yi-ping; Li, Xi-bing; Ma, Chun-de
Behavior of Quenched and Tempered Steels under High Strain Rate Compression Loading
Meyer, L. W.; Seifert, K.; Abdel-Malek, S.
Appropriate material selection for surrogate leg models subjected to blast loading
Cronin, D. S.; Salisbury, C.; Worswick, M. J.
Analytical and Experimental Evaluation of Nonlinear Viscoelastic-Viscoplastic Composite Laminates under Creep, Creep-Recovery, Relaxation and Ramp Loading
Miranda Guedes, Rui; Cardon, Albert; Torres Marques, António
An electrical pulse-heated Kolsky bar technique for high strain rate flow stress measurements of rapidly heated metals
Mates, S.P.; Banovic, S.; Rhorer, R.
Advanced experimental investigation and numerical simulation of polycarbonate behaviour at different strain-rate and temperature
Peroni, M.; Peroni, L.; Avalle, M.
Accurate measurement of stress-strain relation under high strain rate condition by using non-coaxial Hopkinson bar method
Umeda, T.; Mimura, K.
A whole-basin stratigraphic record of sediment and phosphorus loading to the St. Croix River, USA
Engstrom, Daniel; Triplett, Laura; Edlund, Mark
A tapered striker pulse shaping technique for uniform strain rate dynamic compression of bovine bone
Cloete, T.J.; van der Westhuizen, A.; Kok, S.
A study on the development of a loading device using a photoelastic stress freezing method for the analysis of o-ring stress
Hawong, Jai-Sug; Liu-Yi; Nam, Jeong-Hwan
A method to calibrate a specimen with strain gauges to measure force over the full-force range in high rate testing
Wood, P.K.C.; Schley, C.A.; Williams, M.
A New Method to Quantify Delamination Resistance of Fibre Reinforced Polymers (FRP) under Transverse Loading
Gallagher, E.; Jar, P.; Cheng, J.
3-D Simulation of Tectonic Loading at Convergent Plate Boundary Zones: Internal Stress Fields in Northeast Japan
Matsu'ura, Mitsuhiro; Hashimoto, Chihiro
Rate-sensitive numerical analysis of dynamic responses of arched blast doors subjected to blast loading
Zhang, Yadong; Fang, Qin; Chen, Li
Rate effects of high performance fibre reinforced cementitius composite under tensile loading
Cadoni, E.; Dotta, M.; Forni, D.
Website Policies and Important Links Comments
WorldWideScience.org is maintained by the
U.S. Department of Energy's
Office of Scientific and Technical Information as the Operating Agent
for the WorldWideScience Alliance.