Welding of thin sheet of Al alloy (6082) by using Vario wire DC P-GMAW
Dwivedi, D.; Dilthey, Ulrich; Sharma, S. 2009-01-01
German National Library of Science and Technology (GetInfo) (German)
Thin Plate Gap Bridging Study for Nd:YAG Pulsed Laser Lap Welds
Norris, J.; Roach, R.; Fuerschbach, P. 2006-01-01
The Effect of Anvil Geometry and Welding Energy on Microstructures in Ultrasonic Spot Welds of AA6111-T4
Wilkosz, D.; Cooper, R.; Jahn, R. 2007-01-01
Stress Intensity Factors for Kinked Cracks Near Spot Welds in Lap-Shear Specimens
Wang, D.-A.; Pan, J.; SAE 2005-01-01
Relation Between Welding Conditions and Temporal Change of Electrode Force - Study on the Development of Electrode Force Changeable Lap Resistance Spot Welding Machine and Characteristics of Welds (Report 1)
Furukawa, K.; Katoh, M.; Nishio, K. 2006-01-01
Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin
Dubourg, L.; Merati, A.; Jahazi, M. 2010-01-01
Performance of an Ultrasonic Roller Probe for Inspecting Laser Lap Welds
Dasch, C.; Wexler, A.; Sokoloski, F. 2005-01-01
PVP2010-26172 Failure Mechanism of Laser Welds in Lap-Shear Specimens of a High Strength Low Alloy Steel
Asim, K.; Lee, J.; Pan, J. 2010-01-01
Modeling of failure near spot welds in lap-shear specimens based on a plane stress rigid inclusion analysis
Lin, P. C.; Lin, S. H.; Pan, J. 2006-01-01
Modeling of failure mode of laser welds in lap-shear specimens of HSLA steel sheets
Lee, J.; Asim, K.; Pan, J. 2011-01-01
Modeling of Plastic Deformation and Failure Near Spot Welds in Lap-Shear Specimens
Lin, _P-C.; Lin, S-H.; Pan, J. 2004-01-01
Lin, P.-C.; Lin, S.-H.; Pan, J. 2004-01-01
Mode I stress intensity factor solutions for spot welds in lap-shear specimens
Lin, P. C.; Wang, D. A.; Pan, J. 2007-01-01
Microstructures and Failure Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6111-T4 Sheets
Lin, P-C.; Lin, S-H.; Pan, J. 2004-01-01
Microstructures and Failure Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum 5754 Sheets
Arul, S. G.; Pan, T.; Lin, P.-C. 2005-01-01
Methods of predicting the fatigue lives of laser-beam welded lap welds subjected to shear stresses
Zhang, G.; Eibl, M.; Singh, S. 2002-01-01
Methods of Predicting the Fatigue Lives of Laser-Beam Welded Lap Welds Subjected to Shear Stresses
Local Plastic Deformation and Failure Behavior of Nd:YAG Laser Welds in AA5182-O and AA6111-T4
Tao, Hong; Jiang, Xiquan; Dasch, Cameron 2007-01-01
Investigation of Fatigue Lives of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6111-T4 Sheets Based on Fracture Mechanics
Lin, P.-C.; Pan, J.; Pan, T. 2005-01-01
Influence of Electrode Pressure and Welding Conditions on the Maximum Tensile Shear Load - Study on the Development of Electrode Force Changeable Lap Resistance Spot Welding Machine and Characteristics of Welds (Report 2)
In-process monitoring and adaptive control for stable production of sound welds in laser microspot lap welding of aluminum alloy
Kawahito, Y.; Katayama, S. 2005-01-01
In-process monitoring and adaptive control for prevention of through-holes in full-penetration lap welds of aluminum alloy sheets
Kawahito, Y.; Katayama, S. 2006-01-01
In-process gap detection in friction stir welding
Cook, George; Lammlein, David; Lienert, Thomas 2008-01-01
In-Process Monitoring and Adaptive Control for Lap Welds of Aluminum Alloy Sheets
Laser Institute of America 2005-01-01
IMECE2005-82397 Microstructures and Failure Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6061-T6 Sheets
Wang, D.-A.; Lee, S.-C.; Hsieh, K.-Y. 2005-01-01
IMECE2005-80419 Improved Scheme of Analysis and Stress Computation in Lap Welded Joints With Fillet Welds Tranverselly and Longitudinally Loaded
Goytisolo, R.; Hernandez, H.; Moya, J. 2005-01-01
High-brightness laser welding of thin-sheet 316 stainless steel
Farid, M.; Molian, P. A. 2000-01-01
Geometric functions of stress intensity factor solutions for spot welds in lap-shear specimens
Wang, D. A.; Lin, P. C.; Pan, J. 2005-01-01
Friction Stir Lap Welds of AA6111 Aluminum Alloy
Yadava, M.; Mishra, R.; Chen, Y. L. 2007-01-01
Fracture mechanics solutions to spot welds
Zhang, Shicheng 2001-01-01
Fracture and Fatigue Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6111-T4 Sheets
Fatigue life prediction for spot welds in coach-peel and lap-shear specimens with consideration of kinked crack behaviour
Lin, S.-H.; Pan, J. 2004-01-01
Fatigue behavior of spot friction welds in lap-shear and cross-tension specimens of dissimilar aluminum sheets
Tran, V. X.; Pan, J.; Pan, T. 2010-01-01
Fatigue behavior of dissimilar spot friction welds in lap-shear and cross-tension specimens of aluminum and steel sheets
Tran, V. X.; Pan, J. 2010-01-01
Fatigue behavior of aluminum 5754-O and 6111-T4 spot friction welds in lap-shear specimens
Tran, V. X.; Pan, J.; Pan, T. 2008-01-01
Fatigue Life Prediction for Spot Welds in Coach-Peel and Lap-Shear Specimens Based on Fracture Mechanics
Lin, S.-H.; Pan, J.; International Society of Science and Applied Technologies 2002-01-01
Failure modes and fatigue life estimations of spot friction welds in lap-shear specimens of aluminum 6111-T4 sheets. Part 2: Welds made by a flat tool
Lin, P. C.; Pan, J.; Pan, T. 2008-01-01
Failure modes and fatigue life estimations of spot friction welds in lap-shear specimens of aluminum 6111-T4 sheets. Part 1: Welds made by a concave tool
Experimental and numerical fatigue analysis of partial-load and full-load carrying fillet welds at doubler plates and lap joints
Feltz, O.; Fricke, W. 2009-01-01
Effects of weld geometry and sheet thickness on stress intensity factor solutions for spot and spot friction welds in lap-shear specimens of similar and dissimilar materials
Effects of fusion zone size and failure mode on peak load and energy absorption of advanced high strength steel spot welds under lap shear loading conditions
Sun, X.; Stephens, E. V.; Khaleel, M. A. 2008-01-01
Effects of Specimen Width and Overlap Length on Stress Intensity Factors of Spot Welds in Lap-Shear Specimens
Dual-beam laser welding of ultra-thin AA 5052-H19 aluminum
Molian, Pal; Chen, Weichiat 2008-01-01
Development of the Trivex™ friction stir welding tool for making lap welds
Colegrove, P. A.; Shercliff, H. R.; Hyoe, T. 2004-01-01
Calculating the strength of fillet welds in lap welded joints in cylindrical shells (pipes)
Makhnenko, V. I.; Ryabchuk, T. G.; Pochinok, V. E. 1996-01-01
Biaxial Fatigue of Riveted Lap Joints in Fiber Metal Laminates
Trautmann, K.-H.; Dalle Donne, C.; Schendera, C. 1997-01-01
Analytical stress intensity factor solutions for resistance and friction stir spot welds in lap-shear specimens of different materials and thicknesses
Analytic Solution of Mode I Stress Intensity Factor for Spot Welds in Lap-Shear Specimens
Lin, P.-C.; Pan, J.; Wang, D.-A. 2006-01-01
Adaptive Control and Repair for Lap Welds of Aluminum Alloy Sheets Based upon In-Process Monitoring
A statistical approach to acoustic monitoring of laser welding
Hongping Gu; W W Duley 1999-01-01
A method for calculating the fused zone profile of laser keyhole welds
R Akhter; M Davis; J Dowden 2000-01-01
A computational study of local stress intensity factor solutions for kinked cracks near spot welds in lap-shear specimens
Wang, D. A.; Pan, J. 2005-01-01
A Fatigue Crack Growth Model for Spot Welds in Square-Cup and Lap-Shear Specimens under Cyclic Loading Conditions
Sripichai, K.; Lin, P.-C.; Pan, J. 2007-01-01
2010-01-0973 Failure Mode of Laser Welds in Lap-Shear Specimens of HSLA Steel
Lee, J.; Asim, K.; Pan, J. 2010-01-01
2010-01-0972 Tool Geometry Effects on Mechanical Properties of Spot Friction Welds in Lap-Shear Specimens of 6061-T6 Aluminum Sheets
Lin, P.-C.; Qiu, Q.-H.; Su, Z.-M. 2010-01-01
2008-01-1139 Fatigue Behaviors of Aluminum 5754-O Spot Friction Welds in Lap-Shear Specimens
Tran, V.-X.; Pan, J.; Pan, T.-Y. 2008-01-01
2008-01-1138 Effects of Processing Time on Strengths and Failure Modes of Dissimilar 5754/7075 and 7075/5754 Spot Friction Welds in Lap-Shear Specimens
2007-01-1373 A Fatigue Crack Growth Model for Spot Welds in Square-Cup and Lap-Shear Specimens under Cyclic Loading Conditions
2007-01-1373 A Fatigue Crack Growth Model for Spot Welds in Square-Cup and Lap-Shear Specimens Under Cyclic Loading Conditions
Sripichai, K.; Lin, P.-C.; Pan, J. 2008-01-01
2006-01-0535 Analytic Solution of Mode I Stress Intensity Factor for Spot Welds in Lap-Shear Specimens
Lin, P.-C.; Pan, J.; Wang, D.-A. 2007-01-01
2005-01-1250 Investigation of Fatigue Lives of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6111-T4 Sheets Based on Fracture Mechanics
2005-01-0902 Effects of Specimen Width and Overlap Length on Stress Intensity Factors of Spot Welds in Lap-Shear Specimens
Wang, D.-A.; Pan, J. 2005-01-01
2005-01-0900 Stress Intensity Factors for Kinked Cracks Near Spot Welds in Lap-Shear Specimens
2004-01-1330 Microstructures and Failure Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6111-T4 Sheets
2004-01-0817 Modelling of Plastic Deformation and Failure Near Spot Welds in Lap-Shear Specimens