WorldWideScience

Sample records for mushroom substrate preparation

  1. Optimization of substrate preparation for oyster mushroom (Pleurotus ostreatus) cultivation by studying different raw materials and substrate preparation conditions (composting: phases I and II).

    Science.gov (United States)

    Vieira, Fabrício Rocha; de Andrade, Meire Cristina Nogueira

    2016-11-01

    In recent years, oyster mushroom (Pleurotus ostreatus) has become one of the most cultivated mushrooms in the world, mainly in Brazil. Among many factors involved in a mushroom production, substrate preparation is the most critical step, which can be influenced by composting management techniques. Looking forward to optimizing the substrate preparation process, were tested different composting conditions (7 and 14 days of composting with or without conditioning), potential raw materials (decumbens grass, brizantha grass and sugarcane straw) and nitrogen supplementation (with or without wheat bran) on oyster mushroom yield and biological efficiency (BE). The substrate composted for 7 days with conditioning showed higher yield and biological efficiency of mushroom (24.04 and 100.54 %, respectively). Substrates without conditioning (7 and 14 days of composting) showed smaller mushroom yield and biological efficiency. Among the raw materials tested, brizantha grass showed higher mushroom yield followed by decumbens grass, sugarcane straw and wheat straw (28.5, 24.32, 23.5 and 19.27 %, respectively). Brizantha grass also showed higher biological efficiency followed by sugarcane straw, decumbens grass and wheat straw (123.95, 103.70, 96.90 and 86.44 %, respectively). Supplementation with wheat bran improved yield and biological efficiency in all substrate formulations tested; thus, oyster mushroom yield and biological efficiency were influenced by substrate formulation (raw materials), supplementation and composting conditions.

  2. A Study on Recycling of Spent Mushroom Substrate to Prepare Chars and Activated Carbon

    Directory of Open Access Journals (Sweden)

    Yuhui Ma

    2014-05-01

    Full Text Available Chars were obtained from spent mushroom substrate (SMS via pyrolysis. It was found that as the pyrolysis temperature increased from 400 to 700 °C, the char yield decreased from 45.10 to 33.79 wt.% and the higher heating value increased from 17.32 to 22.72 MJ/kg. The largest BET surface area (13 m2/g was created at 500 °C. Hydrogen atoms were continuously lost during pyrolysis, whereas oxygen atoms were difficult to eliminate. Whewellite, calcite, lime, and quartz were the minerals in the chars, and their forms and crystallinity changed with changing pyrolysis temperature. Activated carbon with a BET surface area of 1023 m2/g and a total pore volume of 0.595 cm3/g was obtained from the char prepared at 500 °C. Its characteristics were studied by N2-adsorption, Fourier transform infrared spectroscopy (FTIR, and X-ray diffraction (XRD. The pyrolysis and KOH-activation processes were investigated by thermogravimetric analysis (TGA. The results showed that the pyrolysis of SMS occurred primarily between 217 and 375 °C and that the energies needed for the pyrolysis reactions were relatively low due to the prior mushroom cultivation. Furthermore, lignin was incompletely decomposed in the char prepared at 500 °C, and KOH suppressed tar evolution and reduced the energy needed to decompose the residual lignin during activation.

  3. Alternative substrates for higher mushrooms mycelia cultivation

    Directory of Open Access Journals (Sweden)

    TETIANA KRUPODOROVA

    2015-12-01

    Full Text Available Cultivation of 29 species of higher mushroom mycelia on alternative substrates – wastes of Ukrainian oil-fat industry, has been investigated. The amount of mushroom mycelia obtaining on 12 investigated substrates varied significantly, from 1.0 g/L to 22.9 g/L on the 14th day of cultivation. The superficial cultivation adopted in this study allows for easy to choose appropriate medium (substrate for mycelia production. Alternative substrates (compared to glucose-peptone-yeast medium were selected for all studied species, from soybean cake – most suitable for the mycelial growth of 24 species, to walnut cake − suitable only for 2 species. The utilization of substrates has been evaluated by biological efficiency. The best index of biological efficiency varied from 19.0% to 41.6% depending on the mushroom species. It was established high biological efficiency of mycelia cultivation on substrates: wheat seed cake – Pleurotus djamor, Lyophyllum shimeji, Crinipellis schevczenkovi, Phellinus igniarius, Spongipellis litschaueri; oat seed cake – Ganoderma applanatum and G. lucidum; soybean cake – Hohenbuehelia myxotricha, Trametes versicolor, Morchella esculenta, Cordyceps sinensis, C. militaris, and Agrocybe aegerita; rape seed cake – Auriporia aurea; camelina seed cake – Fomes fomentarius. The cultivation of these species are perspective as a biotechnological process of agricultural wastes converted into mycelia, which could be used in different forms of products with therapeutic action: powder or tablets nutraceuticals or ingredients for functional foods.

  4. Growth and yield performance of Pleurotus ostreatus (Jacq. Fr.) Kumm (oyster mushroom) on different substrates.

    Science.gov (United States)

    Girmay, Zenebe; Gorems, Weldesemayat; Birhanu, Getachew; Zewdie, Solomon

    2016-12-01

    Mushroom cultivation is reported as an economically viable bio-technology process for conversion of various lignocellulosic wastes. Given the lack of technology know-how on the cultivation of mushroom, this study was conducted in Wondo Genet College of Forestry and Natural Resource, with the aim to assess the suitability of selected substrates (agricultural and/or forest wastes) for oyster mushroom cultivation. Accordingly, four substrates (cotton seed, paper waste, wheat straw, and sawdust) were tested for their efficacy in oyster mushroom production. Pure culture of oyster mushroom was obtained from Mycology laboratory, Department of Plant Biology and Biodiversity Management, Addis Ababa University. The pure culture was inoculated on potato dextrose agar for spawn preparation. Then, the spawn containing sorghum was inoculated with the fungal culture for the formation of fruiting bodies on the agricultural wastes. The oyster mushroom cultivation was undertaken under aseptic conditions, and the growth and development of mushroom were monitored daily. Results of the study revealed that oyster mushroom can grow on cotton seed, paper waste, sawdust and wheat straw, with varying growth performances. The highest biological and economic yield, as well as the highest percentage of biological efficiency of oyster mushroom was obtained from cotton seed, while the least was from sawdust. The study recommends cotton seed, followed by paper waste as suitable substrates for the cultivation of oyster mushroom. It also suggests that there is a need for further investigation on various aspects of oyster mushroom cultivation in Ethiopia to promote the industry.

  5. Concentration of radiocesium in cultivated mushrooms and substrates

    International Nuclear Information System (INIS)

    Miyake, Sadaaki; Higasa, Mamoru; Urabe, Ken-ichi; Haraguchi, Masato; Omura, Toshitaka

    2008-01-01

    Concentrations of 134 Cs, 137 Cs and 40 K in mushrooms cultivated in Saitama prefecture and those substrates were measured by gamma-ray spectrometry. In all mushrooms and substrates, 134 Cs was not detected. Concentrations of 137 Cs in mushrooms were in the range of 0.012 - 2.1 Bq/kg·fresh, and those in substrates were in the range of 0.080 - 1.8 Bq/kg·dry. Concentrations of 137 Cs in mushrooms varied widely with mushroom species, and the average concentration of 137 Cs in Lentinus edodes (Shiitake) was over 30 times higher than that in Pleurotus ostreatus (Hiratake). Mushroom-to-substrate concentration ratios of 137 Cs (fresh/dry) were 0.11-0.53. They were higher than the reported transfer factors for common agricultural plants. (author)

  6. Effects of Ganoderma lucidum Spent Mushroom Substrate Extract on ...

    African Journals Online (AJOL)

    Effects of Ganoderma lucidum Spent Mushroom Substrate Extract on Milk and ... Serum antioxidant activity as well as milk and serum immunoglobulin levels were ... total antioxidant capacity (TAC) and mean serum TAC concentration among ...

  7. Identifying 8-hydroxynaringenin as a suicide substrate of mushroom tyrosinase.

    Science.gov (United States)

    Chang, Te-Sheng; Lin, Meng-Yi; Lin, Hsuan-Jung

    2010-01-01

    A biotransformed metabolite of naringenin was isolated from the fermentation broth of Aspergillus oryzae, fed with naringenin, and identified as 8-hydroxynaringenin based on the mass and (1)H- and (13)C-NMR spectral data. The compound showed characteristics of both an irreversible inhibitor and a substrate of mushroom tyrosinase in preincubation and HPLC analysis. These results demonstrate that 8-hydroxynaringenin belongs to a suicide substrate of mushroom tyrosinase. The partition ratio between the compound's molecules in the formation of product and in the inactivation of the enzyme was determined to be 283 +/- 21. The present study's results, together with our previous findings, which proved that both 8-hydroxydaidzein and 8-hydroxygenistein are suicide substrates of mushroom tyrosinase, show that 7,8,4'-trihydroxyl functional groups on flavonoids' skeletons play important roles in producing suicide substrate properties toward mushroom tyrosinase.

  8. The use of waste cellulose in production of white mushroom substrate

    Directory of Open Access Journals (Sweden)

    Ivan Kameník

    2011-01-01

    Full Text Available The employment of industrial wastes in agricultural production is one of the possible ways of waste management. Composting of organic waste can cut the cost of transport and disposal of these wastes while obtaining cheep resource materials for the production of composts. Apart from composting or using wastes in the biogas plants, there is yet another possibility of using local organic waste and it is its employment as a component of substrate (compost for the white mushroom growing. This study deals with the use of waste cellulose in the production of white mushroom substrate. The aim of this study is to evaluate the impact of cellulose content in the substrate on the level of mushroom crop when the mushrooms are grown in the form of compacted substrate designed for small growers. The greatest emphasis is placed on matters of efficient yield of the mushrooms and which are considered to be indispensable for achieving production results over a longer period. This means first and foremost the growing methods and growing environment in the small growing plant. This way the growers could overwhelm the very complicated calculation before the compost preparing. Thanks this way the producers can obtain the utmost probability of the stable crops in the package form of the substrate. The research shows the potential for using of the waste material and fostering the environment friendly food production.

  9. Cultivation of Schizophyllum commune mushroom on different wood substrates

    Directory of Open Access Journals (Sweden)

    P.N. Dasanayaka

    2017-07-01

    Full Text Available Schizophyllum commune is an edible mushroom grown on wood under natural conditions. Present study focused on cultivation of S.commune on different wood substrates since it is not commercially cultivated. A pure culture of S. commune was obtained by growing a tissue of the mushroom on Potato Dextrose Agar (PDA medium. Spawns were produced by growing the mycelium on paddy grains. Mushroom was cultivated on sawdust of seven different wood substrates. The maximum yield was observed in sawdust of jackfruit (Artocarpusheterophyllus followed by sawdust of rambutan (Nepheliumlappaceum and country almond (Terminaliacatappa. A significant difference was not observed when mango (Mangiferaindica elephant apple (Dilleniaindica, tulip wood tree (Harpulliaarborea and thungfaa (Alstoniamacrophylla sawdust used as substrate. The lowest yield was observed in thungfaa (Alstoniamacrophylla sawdust. Effect of some additives on the yield was studied and significant difference in yield was observed when rice bran and used-tea leaves used as additives. Effect of rice bran on yield was studied using different ratios of sawdust to rice bran and the highest was observed in 2:1 ratio of sawdust to rice bran. The best incubating temperature for mycelial growth on the substrate was 350C. The composition of the mushroom on a dry weight basis was; 71.4% moisture, 23.35% crude protein and 6% ash. Tested wood species are promising substrates for cultivation of S.communeas cottage industry.

  10. Self-Heating Pasteurization of Substrates for Culinary-Medicinal Mushrooms Cultivation in Mexico.

    Science.gov (United States)

    Morales, Viviana; Sánchez, Jose E

    2017-01-01

    The aim of this study was to evaluate a self-heating pasteurization technique in preparing substrates for mushroom production. Seven species were used: Agrocybe aegerita, Auricularia fuscosuccinea, Pleurotus djamor, P. eryngii, P. ostreatus, Lentinula edodes, and Ganoderma lucidum. They were cultivated on grass, corncob, wood shavings, and a mixture thereof. The self-heating technique allowed for pasteurization of 3 of the substrates (grass, corncob, and the mixture). The preheating chamber comprised a drawer placed under the pasteurization crate. With this chamber, it was possible to increase inlet air temperatures by 4--5°C. The evaluated mushroom species responded in different ways to the pasteurization process. P. ostreatus (control) and P. djamor produced basidiomes when cultivated in all pasteurization substrates. A. aegerita and P. eryngii fruited only on corncob and the mixture, whereas A. fuscosuccinea fruited only on the pasteurized corncob. G. lucidum and L. edodes did not fructify on the pasteurized substrates.

  11. Optimization of King Oyster Mushroom (Pleurotus eryngii Substrate Using Lignocellulosic Affordable Wastes

    Directory of Open Access Journals (Sweden)

    javad janpoor

    2018-03-01

    Full Text Available Introduction: King oyster mushroom (Pleurotus eryngii belongs to Basidiomycota division, Agaricomycetes class and Pleurotaceae family. This mushroom generally grows on wood wastes of Apiaceae family. The Pleurotus eryngii is found in pastures, meadows, gardens and seldom in grassy forest clearings and hilly areas. The Pleurotus of the Umbellifers occupy an area in the Northern hemisphere between the 30 and 50º N. These species are mainly found in the subtropical regions of the Mediterranean, Central Europe, Russia, Ukraine, Central Asia and Iran. The P. eryngii sensulato is the only taxon within the genus, which grows in association with plants. P. eryngii has distinguishable characteristics such as coherent texture, unique form, favorable taste and high durability. Mushroom cultivation represents the only current economically viable biotechnology process for the conversion of waste plant residues from forests and agriculture. The species of these genera show much diversity in their adaptation the varying agro-climatic condition which makes more cultivated species than other mushrooms. Special ability of Pleurotus family is growing in lingocellulosic plant or agricultural wastes without needing to prepared compost and casing soil. Pleurotus is an efficient lignin- degrading mushroom and can grow and yield well on different types of lignocellulolosic materials. Type of substrates for mushroom growing depends on available plant or agricultural wastes. In Europe, wheat straw is used for mushroom growing; whereas in Asian South-East countries sawdust is more popular. Different materials for cultivating of P. eryngii have been suggested in different regions of the world; but a few studies have been done on suitability of various lignocellulosic affordable wastes for P. eryngii production in Iran. Therefore, the current study aims to evaluate effects of various locally available agro wastes on the growth characteristics of King oyster mushroom (P

  12. Growth and yield performance of Pleurotus ostreatus (Jacq. Fr.) Kumm (oyster mushroom) on different substrates

    OpenAIRE

    Girmay, Zenebe; Gorems, Weldesemayat; Birhanu, Getachew; Zewdie, Solomon

    2016-01-01

    Mushroom cultivation is reported as an economically viable bio-technology process for conversion of various lignocellulosic wastes. Given the lack of technology know-how on the cultivation of mushroom, this study was conducted in Wondo Genet College of Forestry and Natural Resource, with the aim to assess the suitability of selected substrates (agricultural and/or forest wastes) for oyster mushroom cultivation. Accordingly, four substrates (cotton seed, paper waste, wheat straw, and sawdust) ...

  13. Mushrooms

    Science.gov (United States)

    ... these mushrooms have effects similar to the drug LSD . Sometimes Called: shrooms, magic mushrooms How It's Used: ... this topic for: Teens Drugs: What to Know LSD Dealing With Addiction Marijuana Bath Salts Depressants GHB ...

  14. Evaluation of biomass of some invasive weed species as substrate for oyster mushroom (Pleurotus spp.) cultivation.

    Science.gov (United States)

    Mintesnot, Birara; Ayalew, Amare; Kebede, Ameha

    2014-01-15

    This study assessed the bioconversion of Agriculture wastes like invasive weeds species (Lantana camara, Prosopis juliflora, Parthenium hysterophorus) as a substrate for oyster mushroom (Pleurotus species) cultivation together with wheat straw as a control. The experiment was laid out in factorial combination of substrates and three edible oyster mushroom species in a Completely Randomized Design (CRD) with three replications. Pleurotus ostreatus gave significantly (p mushroom cultivation could contribute to alleviating ecological impact of invasive weed species while offering practical option to mitigating hunger and malnutrition in areas where the invasive weeds became dominant.

  15. Maize Residue as a Viable Substrate for Farm Scale Cultivation of Oyster Mushroom (Pleurotus ostreatus

    Directory of Open Access Journals (Sweden)

    Abena O. Adjapong

    2015-01-01

    Full Text Available In the search for alternatives to sawdust as growing media in commercial mushroom cultivation, three organic substrates obtainable as crop residue, maize husk, maize cob, and maize stalk, with each being supplemented with rice bran, were evaluated as growth media for the oyster mushroom, Pleurotus ostreatus (Kummer. For the tested alternatives to sawdust, the harvested weight of fruiting bodies that sprouted on a kilogram maize husk media per crop (32.99 g was the highest. Sawdust media supported significantly (P<0.001 heavier fruiting bodies (42.18 than the maize residues. The peak mushroom harvests for the various substrates were obtained between the first and seventh fruiting body flushes. The biological efficiency of the substrates, which measured usable nutrients indicated that maize stalk supplemented with rice bran, was 39% compared to that of the sawdust media (60%. The maize husk media and the maize cob media had biological efficiencies of 32% and 9.5%, respectively. These results indicate that two of the tested growing media (maize stalk or husk produced mushrooms with yield characteristics that were comparable to the well-used sawdust in the cultivation of oyster mushrooms. The environmental and economic parameters involved in the use and carting of sawdust make these on-farm crop residues a viable alternative for mushroom cultivation in especially nonforest zones of Ghana.

  16. Influence of environmental factors on the carbon dioxide production of mushroom substrate

    NARCIS (Netherlands)

    Loeffen, H.; Bakker, J.C.

    1998-01-01

    An important characteristic of the mushroom cultivation is the "activity" of substrate. The correlations were determined between climate factors and CO2 production per phase of seven crops. The CO2 production was used as a measure for substrate activity. During the vegetative phases high

  17. Tea waste: an effective and economic substrate for oyster mushroom cultivation.

    Science.gov (United States)

    Yang, Doudou; Liang, Jin; Wang, Yunsheng; Sun, Feng; Tao, Hong; Xu, Qiang; Zhang, Liang; Zhang, Zhengzhu; Ho, Chi-Tang; Wan, Xiaochun

    2016-01-30

    Tea waste is the residue that remains after tea leaves have been extracted by hot water to obtain water-soluble components. The waste contains a re-usable energy substrate and nutrients which may pollute the environment if they are not dealt with appropriately. Other agricultural wastes have been widely studied as substrates for cultivating mushrooms. In the present study, we cultivated oyster mushroom using tea waste as substrate. To study the feasibility of re-using it, tea waste was added to the substrate at different ratios in different experimental groups. Three mushroom strains (39, 71 and YOU) were compared and evaluated. Mycelia growth rate, yield, biological efficiency and growth duration were measured. Substrates with different tea waste ratios showed different growth and yield performance. The substrate containing 40-60% of tea waste resulted in the highest yield. Tea waste could be used as an effective and economic substrate for oyster mushroom cultivation. This study also provided a useful way of dealing with massive amounts of tea waste. © 2015 Society of Chemical Industry.

  18. To Study the Influence of Different Substrate on Shiitake Mushroom Fruiting (the First Production Report in IRAN

    Directory of Open Access Journals (Sweden)

    L Razeghi yadak

    2011-01-01

    Full Text Available Abstarct Shiitake mushroom [Lentinula edodes(Berk Singer/Pegler] has the second production class among the most important edible mushrooms. For a long time this mushroom has draw attention due to its unique flavor and taste and also therapeutic properties. ِDue to the importance of this mushroom in the world and also the effect of substrate on the production of this medicinal mushroom, a research were conducted in randomized complete block design with 6 replications on 4 different substrate formulations including: 1 sawdust, wheat bran, millet; 2 sawdust, wheat bran, molasses, chalk, calcium super phosphate; 3sawdust, wheat bran, tea waste; 4sawdust, saccharose, citric acid, chalk and calcium carbonate on L.edodes production for determining the suitable substarte on early fruiting, yield, biological effeciency, average mushroom numbers and weights per block. Results showed that substrate formulation 1 caused earlier fruiting than others (58 days from incubation time, this formulation also had the highest yield (112/3 g/log and biological effeciency (35/09% between the others formula. mashroom number was the most in substrate formulation 1 (16/67 n/log and the highest mushroom wieght was obtained from formulation 4 (14/33 g/per mushroom. there wasn’t any significant differences at (p≤0.05 between substrate formulation 1 and 2. Keywords: Shiitake, Substrate formulation, Yield, Biological effeciency, Mushroom number and weight

  19. Use of spent mushroom substrate for production of Bacillus thuringiensis by solid-state fermentation

    Czech Academy of Sciences Publication Activity Database

    Wu, S.; Lan, Y.; Huang, D.; Peng, Y.; Huang, Z.; Xu, L.; Gelbič, Ivan; Carballar-Lejarazu, R.; Guan, X.; Zhang, L.; Zou, S.

    2014-01-01

    Roč. 107, č. 1 (2014), s. 137-143 ISSN 0022-0493 Institutional support: RVO:60077344 Keywords : Bacillus thuringiensis * spent mushroom substrate * solid-state fermentation Subject RIV: GF - Plant Pathology, Vermin, Weed, Plant Protection Impact factor: 1.506, year: 2014 http://www.bioone.org/doi/pdf/10.1603/EC13276

  20. Yield and size of oyster mushroom grown on rice/wheat straw basal substrate supplemented with cotton seed hull.

    Science.gov (United States)

    Yang, Wenjie; Guo, Fengling; Wan, Zhengjie

    2013-10-01

    Oyster mushroom (Pleurotus ostreatus) was cultivated on rice straw basal substrate, wheat straw basal substrate, cotton seed hull basal substrate, and wheat straw or rice straw supplemented with different proportions (15%, 30%, and 45% in rice straw substrate, 20%, 30%, and 40% in wheat straw substrate) of cotton seed hull to find a cost effective substrate. The effect of autoclaved sterilized and non-sterilized substrate on growth and yield of oyster mushroom was also examined. Results indicated that for both sterilized substrate and non-sterilized substrate, oyster mushroom on rice straw and wheat basal substrate have faster mycelial growth rate, comparatively poor surface mycelial density, shorter total colonization period and days from bag opening to primordia formation, lower yield and biological efficiency, lower mushroom weight, longer stipe length and smaller cap diameter than that on cotton seed hull basal substrate. The addition of cotton seed hull to rice straw and wheat straw substrate slowed spawn running, primordial development and fruit body formation. However, increasing the amount of cotton seed hull can increase the uniformity and white of mycelium, yield and biological efficiency, and increase mushroom weight, enlarge cap diameter and shorten stipe length. Compared to the sterilized substrate, the non-sterilized substrate had comparatively higher mycelial growth rate, shorter total colonization period and days from bag opening to primordia formation. However, the non-sterilized substrate did not gave significantly higher mushroom yield and biological efficiency than the sterilized substrate, but some undesirable characteristics, i.e. smaller mushroom cap diameter and relatively long stipe length.

  1. Spent mushroom substrate biochar as a potential amendment in pig manure and rice straw composting processes.

    Science.gov (United States)

    Chang, Ken-Lin; Chen, Xi-Mei; Sun, Jian; Liu, Jing-Yong; Sun, Shui-Yu; Yang, Zuo-Yi; Wang, Yin

    2017-07-01

    Spent mushroom substrate (SMS) is a bulky waste byproduct of commercial mushroom production, which can cause serious environmental problems and, therefore, poses a significant barrier to future expansion of the mushroom industry. In the present study, we explored the use of SMS as a biochar to improve the quality of bio-fertilizer. Specifically, we performed a series of experiments using composting reactors to investigate the effects of SMS biochar on the physio-chemical properties of bio-fertilizer. Biochar was derived from dry SMS pyrolysed at 500°C and mixed with pig manure and rice straw. Results from this study demonstrate that the addition of biochar significantly reduced electrical conductivity and loss of organic matter in compost material. Nutrient analysis revealed that the SMS-derived biochar is rich in fertilizer nutrients such as P, K, Na, and N. All of these findings suggest that SMS biochar could be an excellent medium for compost.

  2. EFFECT OF INCREASING DOSES OF MUSHROOM SUBSTRATE ON THE ROOT MASS OF SELECTED LAWN MIXTURES

    Directory of Open Access Journals (Sweden)

    Beata Wiśniewska-Kadżajan

    2013-10-01

    Full Text Available To fertilize both grassland and turf lawns waste materials, including the substrate after mushroom cultivation have been used recently. The aim of this study was to determine the effect of the mushrooms substrate to change the amount of root mass of five turf lawns with varying precipitation of perennial ryegrass. Field experiment was established in 2004 in the agricultural station of University of Natural Science and Humanities in Siedlce. In the research, the following factors were used: 1 dose of mushroom substrate, 2 the mixtures lawns with different species composition and participation of perennial ryegrass. Within two years of research the evaluation of the amount of root mass of turf lawns were done. This assessment was made after plants’ vegetation in 2005 and 2006. The roots sampling of lawns were taken. After cleaning of the root and drying at 1050C, the mass was determined by weighing. The largest mass of roots (average from the study years and substrate doses was observed for the two-component mixture (M1 with 80% share of perennial ryegrass, and the smallest for five-component mixture (M5, where the share of perennial ryegrass was 40%. The average for research years of and mixtures type, indicates that most of the root mass formed the turf lawns with the largest mushroom substrate doses, but at least on the control object. The majority of the tested lawn mixtures, with the exception of mixture five (M5 produced a greater mass of roots in the second year (2006 than in the first (2005 year, despite worse weather conditions.

  3. Risk of alpha radionuclides presence in cultivating substrate of oyster mushrooms - Pleurotus ostreatus

    International Nuclear Information System (INIS)

    Galanda, D.

    2006-01-01

    The mushrooms are not only rich food products, but also a specific component of forest biogeocenoses playing an important role in their functioning, including radionuclide migration. The reason why fungi work as such good indicators for radioactivity and pollution in general is connected to their structure. Using absorption to obtain their nutrition, fungi lack water-conducting organs like stems and roots. They absorb moisture and nutrients from the soil background through surface cells. Dissolved or airborne materials, which include pollutants, move freely through the compartments of hyphae. What is more, radiation released during nuclear testing or accidents is absorbed, especially in areas where it rained heavily shortly after the incident. The present work is devoted to an estimation of the transfer coefficient between reared oyster mushrooms and their support die, which was injected with known activity of 241 Am and 242 Pu. After 2 months when we get the reared mushrooms of cane oyster mushrooms were dried and prepared by liquid extraction with Aliquat 336. The samples were measured by ? -spectrometry. The results of activity 241 Am and 242 Pu in the mushrooms body and residual activity in the support was detected and calculated. (author)

  4. [Nutrient transfer and growth of Pinus greggii Engelm. inoculated with edible ectomycorrhizal mushrooms in two substrates].

    Science.gov (United States)

    Rentería-Chávez, María C; Pérez-Moreno, Jesús; Cetina-Alcalá, Víctor M; Ferrera-Cerrato, Ronald; Xoconostle-Cázares, Beatriz

    An ectomycorrhiza is a mutualistic symbiosis of paramount importance in forestry and tree production. One of the selection criteria of ectomycorrhizal fungi that has currently gained importance is their edibility due to the economic, ecological and cultural relevance of edible ectomycorrhizal mushrooms as a non-timber forest product. The effect of the inoculation with three edible ectomycorrhizal mushrooms: Laccaria laccata, Laccaria bicolor y Hebeloma leucosarx, which are widely sold in Mexico, on the growth and nutrient contents of Pinus greggii grown in an experimental substrate and a commercial substrate enriched with a slow-release fertilizer, was evaluated. Two years after sowing, differences in terms of shoot and root biomass and macro and micronutrient contents between inoculated and non-inoculated plants, were recorded independently of the fungal species and the substrate. Despite the fact that plants grown in the commercial substrate had higher growth and nutrient contents, their ectomycorrhizal colonization percentages were smaller than those of the plants grown in the experimental substrate. The differences in the nutrient transfer to the inoculated plant shoots among the evaluated fungal species were recorded. Ca mobilization by L. laccata, Na by L. bicolor and Mn by H. leucosarx were observed in the plants growing in the experimental substrate. It has been demonstrated that the selection of substrates constitutes an important factor in the production of ectomycorrhizal plants and that the three evaluated species of edible ectomycorrhizal mushrooms have an enormous potential in the controlled mycorrhization of P. greggii. Copyright © 2017 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

  5. Characterization of Biochemical Composition for Different Types of Spent Mushroom Substrate in Malaysia

    International Nuclear Information System (INIS)

    Nur Aziera Abd Rasib; Zarina Zakaria; Mohammad Fahrurrazi Tompang; Ridzwan Abdul Rahman; Hakimah Othman

    2015-01-01

    A preliminary study was conducted to identify the amount and changes of biochemical composition of different types of Malaysian spent mushroom substrate (SMS) before and after several cycle of mushroom cultivation. The characterization of SMS involved the analysis of crude protein, carbohydrate, fat, lignin and ash for selected mushrooms namely as white oyster (Pleuratos oestrous), grey oyster (Pleuratos sajor-caju), abalone (Pleuratos cystidiosus), ganoderma (Ganoderma lucidium) and black jelly (Auricularia polytricha). Overall trend showed that there were increment for crude protein and fat, whereas carbohydrate and lignin showed reduction in the content. Significant results were showed on protein increment where ganoderma attained the highest value, 36.6 g, followed by black jelly, white oyster, grey oyster and abalone. Contradictory, lowest carbohydrate reduction was observed in ganoderma at 70.42 g and the most was in black jelly. Increment in fat and reduction in lignin was almost similar for each SMS. There was an increment in the ash percentage resulted from sterilization process. Clearly cultivation by mushroom had changed biochemical value especially in increasing the protein content that might be useful in protein required industry such as animal feeding. (author)

  6. Improvement of Diet-induced Obesity by Ingestion of Mushroom Chitosan Prepared from Flammulina velutipes.

    Science.gov (United States)

    Miyazawa, Noriko; Yoshimoto, Hiroaki; Kurihara, Shoichi; Hamaya, Tadao; Eguchi, Fumio

    2018-02-01

    The anti-obesity effects of mushroom chitosan prepared from Flammulina velutipes were investigated using an animal model with diet-induced obesity. In this study, 5-week-old imprinting control region (ICR) mice were divided into six groups of 10 mice each and fed different diets based on the MF powdered diet (standard diet) for 6 weeks: standard diet control group, high-fat diet control group (induced dietary obesity) consisting of the standard diet and 20% lard, and mushroom chitosan groups consisting of the high-fat diet with mushroom chitosan added at 100, 500, 1,000, and 2,000 mg/kg body weight. On the final day of the experiment, mean body weight was 39.1 g in the high-fat control group and 36.3 g in the 2,000 mg/kg mushroom chitosan group, compared to 35.8 g in the standard diet control group. In the mushroom chitosan groups, a dose-dependent suppression of weight gain and marked improvements in serum triglycerides, total cholesterol, LDL-cholesterol, and HDL-cholesterol were found. The mushroom chitosan groups showed fewer and smaller fat deposits in liver cells than the high-fat diet control group, and liver weight was significantly reduced. Glutamic oxaloacetic transaminase (GOT) and glutamate pyruvic transaminase (GPT), which are indices of the hepatic function, all showed dose-dependent improvement with mushroom chitosan administration. These results suggested that mushroom chitosan acts to suppress enlargement of the liver from fat deposition resulting from a high-fat diet and to restore hepatic function. The lipid content of feces showed a marked increase correlated with the mushroom chitosan dose. These findings suggest the potential use of mushroom chitosan as a functional food ingredient that contributes to the prevention or improvement of dietary obesity by inhibiting digestion and absorption of fats in the digestive tract and simultaneously promotes lipolysis in adipocytes.

  7. Mercury in wild mushrooms and underlying soil substrate from Koszalin, North-central Poland.

    Science.gov (United States)

    Falandysz, Jerzy; Jedrusiak, Aneta; Lipka, Krzysztof; Kannan, Kurunthachalam; Kawano, Masahide; Gucia, Magdalena; Brzostowski, Andrzej; Dadej, Monika

    2004-01-01

    Concentrations of total mercury were determined by cold-vapour atomic absorption spectroscopy (CV-AAS) in 221 caps and 221 stalks of 15 species of wild growing higher fungi/mushrooms and 221 samples of corresponding soil substrate collected in 1997-98 in Manowo County, near the city of Koszalin in North-central Poland. Mean mercury concentrations in caps and stalks of the mushroom species examined and soils varied between 30+/-31 and 920+/-280, 17+/-11 and 560+/-220, and 10+/-9 and 170+/-110 ng/g dry matter, respectively. Cap to stalk mercury concentration quotients were from 1.0+/-0.4 in poison pax (Paxillus involutus) to 2.8+/-0.7 in slippery jack (Suillus luteus). Brown cort (Cortinarius malicorius), fly agaric (Amanita muscaria), orange-brown ringless amanita (A. fulva), red-aspen bolete (Leccinum rufum) and mutagen milk cap (Lactarius necator) contained the highest concentrations of mercury both in caps and stalks, and mean concentrations varied between 600+/-750 and 920+/-280 and 370+/-470 and 560+/-220 ng/g dry matter, respectively. An estimate of daily intake of mercury from mushroom consumption indicated that the flesh of edible species of mushrooms may not pose hazards to human health even at a maximum consumption rate of 28 g/day. However, it should be noted that mercury intake from other foods will augment the daily intake rates. Species such as the sickener (Russula emetica), Geranium-scented russula (R. fellea) and poison pax (P. involutus) did not concentrate mercury as evidenced from the bioconcentration factors (BCFs: concentrations in mushroom/concentration in soil substrate), which were less than 1. Similarly, red-hot milk cap (L. rufus), rickstone funnel cap (Clitocybe geotropa) and European cow bolete (S. bovinus) were observed to be weak accumulators of mercury. Fly agaric (A. muscaria) accumulated great concentrations of mercury with BCFs reaching 73+/-42 and 38+/-22 in caps and stalks, respectively. Mercury BCFs of between 4.0+/-2.3 and 23

  8. Cultivation of three medicinal mushroom species on olive oil press cakes containing substrates

    Directory of Open Access Journals (Sweden)

    Andrej GREGORI

    2015-12-01

    Full Text Available Olive oil press cakes (OOPC represent a waste that has a negative impact on environment. OOPC have little or no use and because of that solutions for their alternative use are sought after. In our experiments we investigated substrate mixtures composed of different proportions of OOPC, wheat bran, crushed corn seeds and beech sawdust for cultivation of Ganoderma lucidum, Lentinula edodes and Grifola frondosa fruiting bodies. The increasing amount of OOPC in fruiting bodies cultivation substrates resulted in decreasing production of fruiting bodies. Results show, that although OOPC in small portion can be successfully used as a medicinal mushroom fruiting bodies cultivating substrate, their use is rational only, if no other substrate composing materials can be found or when OOPC usage solves the problem of its deposition.

  9. Pyrolysis kinetics of spent lark mushroom substrate and characterization of bio-oil obtained from the substrate

    International Nuclear Information System (INIS)

    Jiang, Haifeng; Cheng, Zhiqiang; Zhao, Tianqi; Liu, Mengzhu; Zhang, Mingyue; Li, Jianing; Hu, Meijuan; Zhang, Li; Li, Junfeng

    2014-01-01

    Highlights: • Pyrolysis behavior of spent lark mushroom substrate is investigated. • Significant pyrolysis stage occurs at the range of 232–382 °C. • Kinetics reveals the influence of heating rate on pyrolysis process. • The maximum bio-oil yield is found at 470 °C. • The characterization shows obtained oil can be utilized as a potential resource. - Abstract: In our work, thermal behavior and kinetic characteristics of spent lark mushroom substrate were evaluated to elaborate the thermal decomposition mechanisms and explore the influence of heating rate by using thermogravimetric analyzer and Coats–Redfern method. The study of pyrolysis temperature of raw material was also operated at the range of 410–530 °C, under the feeding rate 0.36 g/min, and the nitrogen flow 16 L/h. The results showed that the maximum bio-oil yield was obtained at 470 °C with the yield of 14.4 wt.%. The analysis of Fourier transform infrared spectrometer and gas chromatography coupled with mass selective detector indicated that the target liquid production was consisted of phenols, hydrocarbons and other components. Simultaneously, the low oxygen and high hydrogen content in bio-oil was also determined by elemental analysis. Based on the above-mentioned results, we demonstrated that the bio-oil obtained from the substrate had high utilization value as a potential energy resource

  10. Composition and antioxidant properties of wild mushrooms Boletus edulis and Xerocomus badius prepared for consumption.

    Science.gov (United States)

    Jaworska, Grażyna; Pogoń, Krystyna; Skrzypczak, Aleksandra; Bernaś, Emilia

    2015-12-01

    Wild edible mushrooms Boletus edulis and Xerocomus badius were prepared for consumption by braising with 10 % canola oil (half of the batch was blanched prior to braising). Fresh X.badius had comparable to B.edulis amounts of proximate components and higher levels of most B-group vitamins and antioxidants. Analyzed mushrooms prepared for consumption fulfilled 7-14 % RDA of vitamin B1 for healthy adults and 15-35, 18-37 and 1 % RDA of B2, B3 and B3 respectively. Prepared for consumption mushrooms were rich in antioxidants containing in 100 g dry weight 164,601 mg total polyphenols, 19-87 mg total flavonoids, 22.1-27.4 mg L-ascorbic acid, 0.531-1.031 mg β-carotene, 0.325-0.456 mg lycopene and 38.64-44.49 mg total tocopherols and presented high antioxidant activity against ABTS (4.9-36.5 mmol TE), against DPPH (7.8-21.3 mmol TE) and in FRAP assay (15.0-28.1 mmol Fe(2+)). Mushrooms prepared for consumption with blanching prior to culinary treatment showed lower antioxidant properties and vitamin content in comparison to mushrooms braised raw.

  11. Influence of calcium and silicon supplementation into Pleurotus ostreatus substrates on quality of fresh and canned mushrooms.

    Science.gov (United States)

    Thongsook, T; Kongbangkerd, T

    2011-08-01

    Supplements of gypsum (calcium source), pumice (silicon source) and pumice sulfate (silicon and calcium source) into substrates for oyster mushrooms (Pleurotus ostreatus) were searched for their effects on production as well as qualities of fresh and canned mushrooms. The addition of pumice up to 30% had no effect on total yield, size distribution and cap diameters. The supplementation of gypsum at 10% decreased the total yield; and although gypsum at 5% did not affect total yield, the treatment increased the proportion of large-sized caps. High content (>10%) of pumice sulfate resulted in the lower yield. Calcium and silicon contents in the fruit bodies were not influenced by supplementations. The centrifugal drip loss values and solid content of fresh mushrooms, and the percentage of weight gained and firmness of canned mushrooms, cultivated in substrates supplemented with gypsum, pumice and pumice sulfate were significantly (p≤0.05) higher than those of the control. Scanning electron micrographs revealed the more compacted hyphae of mushroom stalks supplemented with silicon and/or calcium after heat treatment, compared to the control. Supplementation of P. ostreatus substrates with 20% pumice was the most practical treatment because it showed no effect on yield and the most cost-effective.

  12. The Edible Mushroom Book

    DEFF Research Database (Denmark)

    Conte, Anna Del; Læssøe, Thomas

    A gourmet's guide to foraging and cooking mushrooms. It helps readers find out how to forage, prepare and cook mushrooms that are wild, fresh and free. It features photographs, which show edible mushrooms in their natural habitats.......A gourmet's guide to foraging and cooking mushrooms. It helps readers find out how to forage, prepare and cook mushrooms that are wild, fresh and free. It features photographs, which show edible mushrooms in their natural habitats....

  13. Organic soil production from urban soil, spent mushroom substrate, and other additives

    Science.gov (United States)

    Pham, Nhung Thi Ha

    2017-09-01

    In recent years, spent mushroom substrate (SMS) is becoming the huge problem in environmental pollution issues from mushroom production. However, SMS is also a nutrient-rich ogranic material with available nutrients and high porosity. Therefore, the value of products made from SMS should be exploited to take full advantage of agricultural by-product, support organic agriculture development without environmental pollution. The research has built 5 experimental formulas (4 mixed formulas and 1 control formulas with only urban soil). The analysis results of soil samples from mixed formulas and the control formula witness a significant increase in moisture and OM of mixed formulas (moisture from 36-42%, OM from 5.5-6.9%) after 20 treatment days, and N-P-K contents are also improved remarkably. 60 days later, soil nutrients in mixed formulas continue to rise, with highest OM (8.679%) at CT1; N (0.154%) at CT4; K2O (0,698%) and P2O5 (0,172%) at CT3, in addition, heavy metal contents in all formulas are under standard limit. Synthetic assessment of all norms indicates that the best organic soil product comes from CT3. The pak choi planting experiments are performed show that the growth of plants cultivated on organic soil products made from mixed formulas are much better than plants are grown on initially soil, and they also have no pestilent insect. Specially, pak choi planted on organic soil from CT3 have sharp developing with excellent tolerance ability, quantity and area of leaves are high. Thus, CT3 is the most suitable formula to increase soil nutrients, to solve spent mushroom subtrate streament problems after harvest, and for sustainable agricultural development.

  14. Anaerobic digestion of spent mushroom substrate under thermophilic conditions: performance and microbial community analysis.

    Science.gov (United States)

    Xiao, Zheng; Lin, Manhong; Fan, Jinlin; Chen, Yixuan; Zhao, Chao; Liu, Bin

    2018-01-01

    Spent mushroom substrate (SMS) is the residue of edible mushroom production occurring in huge amounts. The SMS residue can be digested for biogas production in the mesophilic anaerobic digestion. In the present study, performance of batch thermophilic anaerobic digestion (TAD) of SMS was investigated as well as the interconnected microbial population structure changes. The analyzed batch TAD process lasted for 12 days with the cumulative methane yields of 177.69 mL/g volatile solid (VS). Hydrolytic activities of soluble sugar, crude protein, and crude fat in SMS were conducted mainly in the initial phase, accompanied by the excessive accumulation of volatile fatty acids and low methane yield. Biogas production increased dramatically from days 4 to 6. The degradation rates of cellulose and hemicellulose were 47.53 and 55.08%, respectively. The high-throughput sequencing of 16S rRNA gene amplicons revealed that Proteobacteria (56.7%-62.8%) was the dominant phylum in different fermentative stages, which was highly specific compared with other anaerobic processes of lignocellulosic materials reported in the literature. Crenarchaeota was abundant in the archaea. The most dominant genera of archaea were retrieved as Methanothermobacter and Methanobacterium, but the latter decreased sharply with time. This study shows that TAD is a feasible method to handle the waste SMS.

  15. Water Extract from Spent Mushroom Substrate of Hericium erinaceus Suppresses Bacterial Wilt Disease of Tomato

    Science.gov (United States)

    Kwak, A Min; Min, Kyeong Jin; Lee, Sang Yeop

    2015-01-01

    Culture filtrates of six different edible mushroom species were screened for antimicrobial activity against tomato wilt bacteria Ralstonia solanacearum B3. Hericium erinaceus, Lentinula edodes (Sanjo 701), Grifola frondosa, and Hypsizygus marmoreus showed antibacterial activity against the bacteria. Water, n-butanol, and ethyl acetate extracts of spent mushroom substrate (SMS) of H. erinaceus exhibited high antibacterial activity against different phytopathogenic bacteria: Pectobacterium carotovorum subsp. carotovorum, Agrobacterium tumefaciens, R. solanacearum, Xanthomonas oryzae pv. oryzae, X. campestris pv. campestris, X. axonopodis pv. vesicatoria, X. axonopodis pv. citiri, and X. axonopodis pv. glycine. Quantitative real-time PCR revealed that water extracts of SMS (WESMS) of H. erinaceus induced expressions of plant defense genes encoding β-1,3-glucanase (GluA) and pathogenesis-related protein-1a (PR-1a), associated with systemic acquired resistance. Furthermore, WESMS also suppressed tomato wilt disease caused by R. solanacearum by 85% in seedlings and promoted growth (height, leaf number, and fresh weight of the root and shoot) of tomato plants. These findings suggest the WESMS of H. erinaceus has the potential to suppress bacterial wilt disease of tomato through multiple effects including antibacterial activity, plant growth promotion, and defense gene induction. PMID:26539048

  16. Synergistic dye adsorption by biochar from co-pyrolysis of spent mushroom substrate and Saccharina japonica.

    Science.gov (United States)

    Sewu, Divine Damertey; Boakye, Patrick; Jung, Hwansoo; Woo, Seung Han

    2017-11-01

    The potential of activating terrestrial biomass (spent mushroom substrate, SMS) with ash-laden marine biomass [kelp seaweed, KE] via co-pyrolysis in the field of adsorption was first investigated. KE biochar (KBC), SMS biochar (SMSBC), biochar (SK10BC) from 10%-KE added SMS, and biochar (ESBC) from KE-extract added SMS were used for the adsorption of cationic dye crystal violet (CV). ESBC had highest fixed carbon content (70.60%) and biochar yield (31.6%). SK10BC exhibited high ash content, abundant functional groups, coarser surface morphology and Langmuir maximum adsorptive capacity (610.1mg/g), which is 2.2 times higher than that of SMSBC (282.9mg/g). Biochar activated by a small amount of high ash-containing biomass such as seaweed via co-pyrolysis can serve as viable alternative adsorbent for cationic dye removal. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Evaluation of edible mushroom Oudemansiella canarii cultivation on different lignocellulosic substrates.

    Science.gov (United States)

    Xu, Feng; Li, Zhiming; Liu, Yu; Rong, Chengbo; Wang, Shouxian

    2016-09-01

    In this study, the mycelial growth rate, mycelial colonization time, yield, and biological efficiency of the edible mushroom Oudemansiella canarii were determined, and the effects of different substrate combinations on productivity, chemical contents and amino acids were evaluated. Lignocellulosic wastes, such as cottonseed hull, sawdust, corncob, and their combinations supplemented with 18% wheat bran and 2% lime, were used for the cultivation of O. canarii. The biological efficiency (BE) and essential amino acid content of treatment T1, which consisted of 80% cottonseed hull, were the highest among all the tested treatments. Mixtures that included sawdust, such as treatments T2 (80% sawdust), T4 (40% sawdust + 40% cottonseed hull), and T6 (40% sawdust + 40% corncob), exhibited lower yield and BE. Corncob was good for O. canarii production in terms of yield and BE, whereas the mycelial growth rate and colonization time were lower compared to those on other substrates. Comparing the BE, essential amino acids, and other traits of the six treatments, treatment T1 (80% cottonseed hull) was the best formula for O. canarii cultivation and should be extended in the future.

  18. Rare earth elements concentration in mushroom cultivation substrates affects the production process and fruit-bodies content of Pleurotus ostreatus and Cyclocybe cylindracea.

    Science.gov (United States)

    Koutrotsios, Georgios; Danezis, Georgios P; Georgiou, Constantinos A; Zervakis, Georgios I

    2018-04-20

    Concentrations of 16 rare earth elements (REEs) and two actinides were determined for the first time both in cultivated mushrooms and in their production substrates by inductively coupled plasma mass spectroscopy. Moreover, the effect of REEs on cultivation parameters and composition of the final product was assessed, together with their potential use for authentication purposes. The concentrations of REEs varied greatly among seven cultivation substrates and correlated with measurements in Cyclocybe cylindracea mushrooms; no such correlation was established in Pleurotus ostreatus. Reduction of hemicellulose, cellulose, and lignin in substrates during P. ostreatus cultivation was positively correlated with REE concentrations, which also affected the production performance depending on the species examined. In all cases, a negative correlation was established between bioconcentration factors (BCF) in mushrooms and REE content in substrates, while the effect of substrate composition on BCF values varied according to the element studied. The estimated daily intake values of REEs through mushroom consumption was at much lower levels than those reported as potentially harmful for human health. The content of REEs in cultivation substrates and in mushrooms revealed that the bioaccumulation of elements differed in each fungus. The nature/origin of substrates seemed to affect the concentration of REEs in mushrooms to a considerable extent. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

  19. Purity of targets prepared on Cu substrates

    Science.gov (United States)

    Méens, A.; Rossini, I.; Sens, J. C.

    1993-09-01

    The purity of several elemental self-supporting targets usually prepared by evaporation onto soluble Cu substrates has been studied. The targets were analysed by Rutherford backscattering and instrumental neutron activation analysis. Because of the high percentage of Cu observed in some Si targets, further measurements, including transmission electron microscopy, have been performed on Si targets deposited by e-gun bombardment onto Cu and ion-beam sputtering onto betaine.

  20. the use of spent mushroom substrate of l. subnudus berk as a soil

    African Journals Online (AJOL)

    DR. AMINU

    Australia and Papua New Guinea (Kadiri et al., 2003;. Kadiri, 2005; Kadiri and Adegboye, 2006; Kadiri et al.,. 2007). The Chinese have used dried mushrooms as diuretics and some mushroom species are currently being utilized as carcinostatic substances (Chihara et al., 1970; Chihara, 1989; Mizuno, et al., 1995; Daba,.

  1. Use of spent mushroom substrate for production of Bacillus thuringiensis by solid-state fermentation.

    Science.gov (United States)

    Wu, Songqing; Lan, Yanjiao; Huang, Dongmei; Peng, Yan; Huang, Zhipeng; Xu, Lei; Gelbic, Ivan; Carballar-Lejarazu, Rebeca; Guan, Xiong; Zhang, Lingling; Zou, Shuangquan

    2014-02-01

    The aim of this study was to explore a cost-effective method for the mass production of Bacillus thuringiensis (Bt) by solid-state fermentation. As a locally available agroindustrial byproduct, spent mushroom substrate (SMS) was used as raw material for Bt cultivation, and four combinations of SMS-based media were designed. Fermentation conditions were optimized on the best medium and the optimal conditions were determined as follows: temperature 32 degrees C, initial pH value 6, moisture content 50%, the ratio of sieved material to initial material 1:3, and inoculum volume 0.5 ml. Large scale production of B. thuringiensis subsp. israelensis (Bti) LLP29 was conducted on the optimal medium at optimal conditions. High toxicity (1,487 international toxic units/milligram) and long larvicidal persistence of the product were observed in the study, which illustrated that SMS-based solid-state fermentation medium was efficient and economical for large scale industrial production of Bt-based biopesticides. The cost of production of 1 kg of Bt was approximately US$0.075.

  2. [Effect of substrate of edible mushroom on continuously cropping obstacle of Rehmannia glutinosa].

    Science.gov (United States)

    Ru, Rui-Hong; Li, Xuan-Zhen; Hunag, Xiao-Shu; Gao, Feng; Wang, Jian-Ming; Li, Ben-Yin; Zhang, Zhong-Yi

    2014-08-01

    The continuous cultivation of Rehmannia glutinosa causes the accumulation of phenolic acids in soil. It is supposed to be the reason of the so called "continuously cropping obstacle". In this study, phenolic acids (hydroxybenzoic acid, vanillic acid, eugenol, vanillin and ferulic acid) were degraded by the extracta of all the tested spent mushroom substrate (SMS) and the maximal degradation rate was 75.3%, contributed by extraction of SMS of Pleurotus eryngii. Pot experiment indicated that hydroxybenzoic acid and vanillin in soil were also degraded effectively by SMS of P. eryngii. The employment of SMS enhanced ecophysiology index to near the normal levels, such as crown width, leaves number, leaf length, leaf width and height. At the same time, the fresh and dry weight and total catalpol concentration of tuberous root weight of R. glutinosa was increased to 2.70, 3.66, 2.25 times by employment of SMS, respectively. The increase of bacteria, fungi and actinomycetes numbers in rhizosphere soil were observed after the employment of SMS by microbial counts. The employment of SMS also enhanced the enzyme activity in soils, such as sucrase, cellulase, phosphalase, urease and catelase. These results indicated that the employment of SMS alleviated the continuously cropping obstacle of R. glutinosa in some extent.

  3. Combined alkali and acid pretreatment of spent mushroom substrate for reducing sugar and biofertilizer production.

    Science.gov (United States)

    Zhu, Hong-Ji; Liu, Jia-Heng; Sun, Li-Fan; Hu, Zong-Fu; Qiao, Jian-Jun

    2013-05-01

    Spent mushroom substrate (SMS) was pretreated with alkaline reagents including potassium hydroxide, lime and ammonia to enhance enzymatic saccharification. Under the best pretreatment conditions (1M KOH, 80 °C, 90 min; 1M lime, 80 °C, 120 min; 10 M ammonia, 70 °C, 120 min), the total reducing sugar (TRS) yield reached 258.6, 204.2 and 251.2 mg/g raw SMS, which were respectively 6.15, 4.86, and 5.98 times of untreated SMS. The effects of pretreatment by above alkaline reagents and sulfuric acid on the composition and structure of SMS were evaluated to provide comparative performance data. A new process, combined alkali and acid (CAA) pretreatment followed by enzymatic hydrolysis, was innovatively proposed to improve the cost-effectiveness and avoid environmental problems. The SMS residue after CAA pretreatment-enzymatic hydrolysis process was converted to biofertilizer with Pichia farinose FL7 and a cell density of 3.0×10(8) cfu/g in biomass was attained. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Improving sewage sludge composting by addition of spent mushroom substrate and sucrose.

    Science.gov (United States)

    Meng, Liqiang; Zhang, Shumei; Gong, Hainan; Zhang, Xiancheng; Wu, Chuandong; Li, Weiguang

    2018-04-01

    The effects of spent mushroom substrate (SMS) and sucrose (S) amendment on emissions of nitrogenous gas (mainly NH 3 and N 2 O) and end products quality of sewage sludge (SS) composting were evaluated. Five treatments were composted for 20 days in laboratory-scale using SS with different dosages of SMS and S, without additive amended treatment used as control. The results indicated that SMS amendments especially combination with S promoted dehydrogenase activity, CO 2 production, organic matter degradation and humification in the composting, and maturity indices of composting also showed that the 30%SMS+2%S treatment could be much more appropriate to improve the composting process, such as total Kjeldahl nitrogen, nitrification index, humic acids/fulvic acids ratio and germination index, while the emissions of NH 3 and N 2 O were reduced by 34.1% and 86.2%, respectively. These results shown that the moderate addition of SMS and S could improve the compost maturity and reduce nitrogenous gas emission. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Application of residual polysaccharide-degrading enzymes in dried shiitake mushrooms as an enzyme preparation in food processing.

    Science.gov (United States)

    Tatsumi, E; Konishi, Y; Tsujiyama, S

    2016-11-01

    To examine the activities of residual enzymes in dried shiitake mushrooms, which are a traditional foodstuff in Japanese cuisine, for possible applications in food processing. Polysaccharide-degrading enzymes remained intact in dried shiitake mushrooms and the activities of amylase, β-glucosidase and pectinase were high. A potato digestion was tested using dried shiitake powder. The enzymes reacted with potato tuber specimens to solubilize sugars even under a heterogeneous solid-state condition and that their reaction modes were different at 38 and 50 °C. Dried shiitake mushrooms have a potential use in food processing as an enzyme preparation.

  6. Assessment of spent mushroom substrate as sorbent of fungicides: influence of sorbent and sorbate properties.

    Science.gov (United States)

    Marín-Benito, Jesús M; Rodríguez-Cruz, M Sonia; Andrades, M Soledad; Sánchez-Martín, María J

    2012-01-01

    The capacity of spent mushroom substrate (SMS) as a sorbent of fungicides was evaluated for its possible use in regulating pesticide mobility in the environment. The sorption studies involved four different SMS types in terms of nature and treatment and eight fungicides selected as representative compounds from different chemical groups. Nonlinear sorption isotherms were observed for all SMS-fungicide combinations. The highest sorption was obtained by composted SMS from Agaricus bisporus cultivation. A significant negative and positive correlation was obtained between the K(OC) sorption constants and the polarity index values of sorbents and the K(OW) of fungicides, respectively. The statistic revealed that more than 77% of the variability in the K(OW) could be explained considering these properties jointly. The other properties of both the sorbent (total carbon, dissolved organic carbon, or pH) and the sorbate (water solubility) were nonsignificant. The hysteresis values for cyprodinil (log K(OW)= 4) were for all the sorbents much higher (>3) than for other fungicides. This was consistent with the remaining sorption after desorption considered as an indicator of the sorption efficiency of SMS for fungicides. Changes in the absorption bands of fungicides sorbed by SMS observed by FTIR permitted establishing the interaction mechanism of fungicides with SMS. The findings of this work provide evidence for the potential capacity of SMS as a sorbent of fungicides and the low desorption observed especially for some fungicides, although they suggest that more stabilized or humified organic substrates should be produced to enhance their efficiency in environmental applications. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  7. Stabilisation of spent mushroom substrate for application as a plant growth-promoting organic amendment.

    Science.gov (United States)

    Paula, Fabiana S; Tatti, Enrico; Abram, Florence; Wilson, Jude; O'Flaherty, Vincent

    2017-07-01

    Over three million tonnes of spent mushroom substrate (SMS) are produced in Europe every year as a by-product of the cultivation of Agaricus bisporus. The management of SMS has become an increasing challenge for the mushroom production industry, and finding environmentally and economically sustainable solutions for this organic residue is, therefore, highly desirable. Due to its physical properties and nutrient content, SMS has great potential to be employed in agricultural and horticultural sectors, and further contribute to reduce the use of non-renewable resources, such as peat. However, SMS is often regarded as not being stable and/or mature, which hampers its wide use for crop production. Here, we demonstrate the stabilisation of SMS and its subsequent use as organic fertiliser and partial peat replacement in horticulture. The stabilisation was performed in a laboratory-scale composting system, with controlled temperature and aeration. Physical and chemical parameters were monitored during composting and provided information on the progress of the process. Water soluble carbohydrates (WSC) content was found to be the most reliable parameter to predict SMS stability. In situ oxygen consumption indicated the main composting phases, reflecting major changes in microbial activity. The structure of the bacterial community was also found to be a potential predictor of stability, as the compositional changes followed the composting progress. By contrast, the fungal community did not present clear successional process along the experiment. Maturity and quality of the stabilised SMS were assessed in a horticultural growing trial. When used as the sole fertiliser source, SMS was able to support Lolium multiflorum (Italian ryegrass) growth and significantly improved grass yield with a concentration-dependent response, increasing grass biomass up to 300%, when compared to the untreated control. In summary, the results indicated that the method employed was efficient in

  8. Evaluation of casing materials made from spent mushroom substrate and coconut fibre pith for use in production of Agaricus bisporus (Lange) Imbach

    Energy Technology Data Exchange (ETDEWEB)

    Pardo-Gimenez, A.; Pardo-Gonzalez, J. E.

    2008-07-01

    The agronomic performance of different proportions of mixtures of coconut fibre (CF) pith and spent mushroom substrate (SMS) was studied for their use as casing material in mushroom cultivation. After chemical and biological characterisation of the casing substrates qualitative and quantitative production parameters were evaluated in a cycle of Agaricus production. An increase in the proportion of SMS reduced the number of carpophores and overall yield; while the first flush was delayed, mushroom size tended to increase and the mushrooms had a higher dry matter content and a better texture, although their colour was worse. Combinations of CF pith and SMS of 4:1 and 3:2 (v/v) gave biological efficiencies of 92.9 and 82.6 kg 100 kg-1 compost, respectively. These values compare well with that obtained from the commercial casings used as a control. The high electrical conductivity of the mixture containing the highest proportion of SMS would limit its use. However, the results indicate the viability of reusing SMS as an ingredient of casing material for mushroom cultivation. This alternative could be considered to partially replace the organic substrates normally used for mushroom cultivation, with the double advantage of decreasing cost and reducing the environmental impact of waste disposal. Additional key words: alternative casing, compost reuse, mushroom cultivation. (Author) 31 refs.

  9. Bioremediation of fungicides by spent mushroom substrate and its associated microflora.

    Science.gov (United States)

    Ahlawat, O P; Gupta, Pardeep; Kumar, Satish; Sharma, D K; Ahlawat, K

    2010-10-01

    Experiments were conducted both under in vitro and in situ conditions to determine the biodegradation potential of button mushroom spent substrate (SMS) and its dominating microbes (fungi and bacteria) for carbendazim and mancozeb, the commonly used agricultural fungicides. During 6 days of incubation at 30 ± 2°C under broth culture conditions, highest degradation of carbendazim (17.45%) was recorded with B-1 bacterial isolate, while highest degradation of mancozeb (18.05%) was recorded with Trichoderma sp. In fungicide pre-mixed sterilized SMS, highest degradation of carbendazim (100.00-66.50 μg g(-1)) was recorded with mixed inoculum of Trichoderma sp. and Aspergillus sp., whereas highest degradation of mancozeb (100.00-50.50 μg g(-1)) was with mixed inoculum of Trichoderma sp., Aspergillus sp. and B-I bacterial isolate in 15 days of incubation at 30 ± 2°C. All these microbes both individually as well as in different combinations grew well and produced extracellular lignolytic enzymes on SMS, which helped in fungicides degradation. Under in situ conditions, among three different proportions of SMS (10, 20 and 30%, w/w) mixed with fungicide pre-mixed soil (100 μg g(-1) of soil), the degradation of carbendazim was highest in 30% SMS treatment, while for mancozeb it was in 20% SMS treatment. The residue levels of both fungicides decreased to half of their initial concentration after 1 month of SMS mixing.

  10. Pilot-scale passive bioreactors for the treatment of acid mine drainage: efficiency of mushroom compost vs. mixed substrates for metal removal.

    Science.gov (United States)

    Song, Hocheol; Yim, Gil-Jae; Ji, Sang-Woo; Neculita, Carmen Mihaela; Hwang, Taewoon

    2012-11-30

    Pilot-scale field-testing of passive bioreactors was performed to evaluate the efficiency of a mixture of four substrates (cow manure compost, mushroom compost, sawdust, and rice straw) relative to mushroom compost alone, and of the effect of the Fe/Mn ratio, during the treatment of acid mine drainage (AMD) over a 174-day period. Three 141 L columns, filled with either mushroom compost or the four substrate mixture (in duplicate), were set-up and fed with AMD from a closed mine site, in South Korea, using a 4-day hydraulic retention time. In the former bioreactor, effluent deterioration was observed over 1-2 months, despite the good efficiency predicted by the physicochemical characterization of mushroom compost. Steady state effluent quality was then noted for around 100 days before worsening in AMD source water occurred in response to seasonal variations in precipitation. Such changes in AMD quality resulted in performance deterioration in all reactors followed by a slow recovery toward the end of testing. Both substrates (mushroom compost and mixtures) gave satisfactory performance in neutralizing pH (6.1-7.8). Moreover, the system was able to consistently reduce sulfate from day 49, after the initial leaching out from organic substrates. Metal removal efficiencies were on the order of Al (∼100%) > Fe (68-92%) > Mn (49-61%). Overall, the mixed substrates showed comparable performance to mushroom compost, while yielding better effluent quality upon start-up. The results also indicated mushroom compost could release significant amounts of Mn and sulfate during bioreactor operation. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Dietary fibers from mushroom sclerotia: 1. Preparation and physicochemical and functional properties.

    Science.gov (United States)

    Wong, Ka-Hing; Cheung, Peter C K

    2005-11-30

    Preparation of three novel dietary fibers (DFs) from mushroom sclerotia, namely, Pleurotus tuberregium, Polyporous rhinocerus, and Wolfiporia cocos, by a scale-up modified AOAC procedure using industrial enzymes was investigated. A remarkably high level of total dietary fiber (TDF) ranging from 81.7 to 96.3% sample dry matter (DM), in which a content of nonstarch polysaccharide (NSP) ranging from 86.6 to 94.3% sclerotial TDF DM, was obtained from the three sclerotia. All sclerotial DFs were rich in beta-glucan (the glucose residue ranged from 89.7 to 94.5% NSP DM) with a very low level of resistant glycogen (ranged from 3.77 to 3.94% sclerotial TDF DM). All three novel sclerotial DFs also exhibited similar, if not better, physicochemical and functional properties (pH, color, water binding capacity, oil holding capacity, and emulsifying properties) as those of barely DF control and commercial DF-rich ingredients. The potential use of the three mushroom sclerotial DFs as a new beta-glucan type DF-rich ingredient in the food industry was discussed.

  12. Methane production and characteristics of the microbial community in the co-digestion of spent mushroom substrate with dairy manure.

    Science.gov (United States)

    Luo, Xiaosha; Yuan, Xufeng; Wang, Shiyu; Sun, Fanrong; Hou, Zhanshan; Hu, Qingxiu; Zhai, Limei; Cui, Zongjun; Zou, Yajie

    2018-02-01

    Spent mushroom substrate (SMS) is a potential biomass material generated during mushroom cultivation. In this study, the methane yield and microbial community resulting from co-digestion of SMS and dairy manure (DM) at different mixing ratios (0:4, 1:1, 3:1, and 1:3), were evaluated. Co-digestion analysis showed that the methane yield from the mixtures was 6%-61% higher than the yield from SMS or DM alone, indicating a synergistic effect of co-digestion of SMS with DM. For the SMS of F.velutipes (SFv) and P.erygii var. tuoliensis (SPt), co-digestion of DM/SMS at a ratio of 1:1 was optimal, but for the SMS of P. eryngi (SPe), co-digestion of DM/SMS at a ratio of 3:1 was ideal. The pH at all co-digestion ratios was in the range of 6.8-8.0, indicating that adding DM could increase the systemic buffering capacity. Methanosaetaceae was shown to be the predominant methanogens present during the co-digestion of DM/SMS. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Using Spent Mushroom Substrate as the Base for Organic-Mineral Micronutrient Fertilizer – Field Tests on Maize

    Directory of Open Access Journals (Sweden)

    Łukasz Tuhy

    2015-07-01

    Full Text Available Spent mushroom substrate (SMS is a noxious byproduct of the mushroom industry. The aim of this work was to convert SMS into organic-mineral micronutrient (Zn(II, Mn(II, and Cu(II fertilizer via biosorption and examine the effect of its application in field tests on maize compared to commercial reference micronutrient fertilizer. Crop yield and crop quality were assessed, and multielemental analysis of grains was conducted for the evaluation of the fertilization effect on maize grains and to assess bioavailability of nutrients from fertilizers. Grain yield for maize treated with micronutrients delivered with SMS was noticeably higher (11.5% than the untreated group and the NPK (nitrogen, phosphorus, potassium fertilizer treated only group (2.8%. Bioavailability (TF of micronutrients from SMS were comparable with reference micronutrient fertilizer (7% Zn, 4% Mn, and 2.3% Cu. The new product has the potential to be used as a micronutrient fertilizer. Satisfactory results of grain yield (6.4 Mg ha-1, high content of micronutrients (Zn 1.6%, Mn 1.2%, and Cu 1.8%, and macronutrients (P 1.0%, S 3.1%, Ca 8.2%, and K 0.2% were observed. The bioavailability suggests that enriched SMS could be a good alternative to fertilizers in the present market.

  14. Application of solid waste from anaerobic digestion of poultry litter in Agrocybe aegerita cultivation: mushroom production, lignocellulolytic enzymes activity and substrate utilization.

    Science.gov (United States)

    Isikhuemhen, Omoanghe S; Mikiashvili, Nona A; Kelkar, Vinaya

    2009-06-01

    The degradation and utilization of solid waste (SW) from anaerobic digestion of poultry litter by Agrocybe aegerita was evaluated through mushroom production, loss of organic matter (LOM), lignocellulolytic enzymes activity, lignocellulose degradation and mushroom nutrients content. Among the substrate combinations (SCs) tested, substrates composed of 10-20% SW, 70-80% wheat straw and 10% millet was found to produce the highest mushroom yield (770.5 and 642.9 g per 1.5 kg of substrate). LOM in all SCs tested varied between 8.8 and 48.2%. A. aegerita appears to degrade macromolecule components (0.6-21.8% lignin, 33.1-55.2% cellulose and 14-53.9% hemicellulose) during cultivation on the different SCs. Among the seven extracellular enzymes monitored, laccase, peroxidase and CMCase activities were higher before fruiting; while xylanase showed higher activities after fruiting. A source of carbohydrates (e.g., millet) in the substrate is needed in order to obtain yield and biological efficiency comparable to other commercially cultivated exotic mushrooms.

  15. A Comprehensive Review of Tropical Milky White Mushroom (Calocybe indica P&C).

    Science.gov (United States)

    Subbiah, Krishnamoorthy Akkanna; Balan, Venkatesh

    2015-09-01

    A compressive description of tropical milky white mushroom (Calocybe indica P&C var. APK2) is provided in this review. This mushroom variety was first identified in the eastern Indian state of West Bengal and can be cultivated on a wide variety of substrates, at a high temperature range (30~38℃). However, no commercial cultivation was made until 1998. Krishnamoorthy 1997 rediscovered the fungus from Tamil Nadu, India and standardized the commercial production techniques for the first time in the world. This edible mushroom has a long shelf life (5~7 days) compared to other commercially available counterparts. A comprehensive and critical review on physiological and nutritional requirements viz., pH, temperature, carbon to nitrogen ratio, best carbon source, best nitrogen source, growth period, growth promoters for mycelia biomass production; substrate preparation; spawn inoculation; different supplementation and casing requirements to increase the yield of mushrooms has been outlined. Innovative and inexpensive methods developed to commercially cultivate milky white mushrooms on different lignocellulosic biomass is also described in this review. The composition profiles of milky white mushroom, its mineral contents and non-enzymatic antioxidants are provided in comparison with button mushroom (Agaricus bisporus) and oyster mushroom (Pleurotus ostreatus). Antioxidant assay results using methanol extract of milky white mushroom has been provided along with the information about the compounds that are responsible for flavor profile both in fresh and dry mushrooms. Milky white mushroom extracts are known to have anti-hyperglycemic effect and anti-lipid peroxidation effect. The advantage of growing at elevated temperature creates newer avenues to explore milky white mushroom cultivation economically around the world, especially, in humid tropical and sub-tropical zones. Because of its incomparable productivity and shelf life to any other cultivated mushrooms in the

  16. EVALUATION OF GIN WASTE AS A GROWING SUBSTRATE, ENRICHED WITH DIFFERENT VOLUME PERCENTAGE OF THE WHEAT BRAN FOR CULTIVATION OF OYSTER MUSHROOM (PLEUROTUS OSTREATUS

    Directory of Open Access Journals (Sweden)

    M. M. Akhtar

    2016-08-01

    Full Text Available Pleurotusostreatus mushroom was cultivated on cotton gin waste amended with wheat bran in order to judge its growth potential. Two substrates (cotton gin waste and wheat bran were employed alone and with different combinations. Experiment consisted of four treatments T0 (100 % cotton gin waste, T1(97% cotton gin waste + 3% wheat bran, T2(94% cotton gin waste + 6% wheat bran and T3(91% cotton gin waste + 9% wheat bran. Data about time needed for commencement of spawn run, time needed for completion of mycelial growth, time needed for initiation of pinheads, time needed for harvesting of 1st, 2nd and 3rd flush, fresh weight of 1st, 2nd and 3rd flush harvested, total yield, pH of mushroom, total soluble solids of mushroom, acidity and ascorbic acid contents, reducing sugars, non-reducing sugars and total sugars of mushroom, total nitrogen, phosphorus and potassium contents of mushroom was recorded. T0 (100 % cotton gin waste performed better as compared to other treatments.

  17. Preparation of surface enhanced Raman substrate and its characterization

    Science.gov (United States)

    Liu, Y.; Wang, J. Y.; Wang, J. Q.

    2017-10-01

    Surface enhanced Raman spectroscopy (SERS) is a fast, convenient and highly sensitive detection technique, and preparing the good effect and repeatable substrate is the key to realize the trace amount and quantitative detection in the field of food safety detection. In this paper, a surface enhanced Raman substrate based on submicrometer silver particles structure was prepared by chemical deposition method, and characterized its structure and optical properties.

  18. Composted versus Raw Olive Mill Waste as Substrates for the Production of Medicinal Mushrooms: An Assessment of Selected Cultivation and Quality Parameters

    Directory of Open Access Journals (Sweden)

    Georgios I. Zervakis

    2013-01-01

    Full Text Available Two-phase olive mill waste (TPOMW, “alperujo” is a highly biotoxic sludge-like effluent of the olive-oil milling process with a huge seasonal production. One of the treatment approaches that has so far received little attention is the use of TPOMW as substrate for the cultivation of edible mushrooms. Fifteen fungal strains belonging to five species (Basidiomycota, that is, Agrocybe cylindracea, Pleurotus cystidiosus, P. eryngii, P. ostreatus, and P. pulmonarius, were evaluated for their efficacy to colonize media composed of TPOMW, which was used either raw or composted in mixtures with wheat straw in various ratios. Qualified strains exhibited high values of biological efficiency (e.g., 120–135% for Pleurotus spp. and 125% for A. cylindracea and productivity in subsequent cultivation experiments on substrates supplemented with 20–40% composted TPOMW or 20% raw TPOMW. Only when supplementation exceeded 60% for raw TPOMW, a negative impact was noted on mushroom yields which could be attributed to the effluent's toxicity (otherwise alleviated in the respective composted TPOMW medium. Earliness and mushroom size as well as quality parameters such as total phenolic content and antioxidant activity did not demonstrate significant differences versus the control wheat-straw substrate. The substrates hemicellulose content was negatively correlated with mycelium growth rates and yields and positively with earliness; in addition, cellulose: lignin ratio presented a positive correlation with mycelium growth and mushroom weight for A. cylindracea and with earliness for all species examined. TPOMW-based media revealed a great potential for the substitution of traditional cultivation substrates by valorizing environmentally hazardous agricultural waste.

  19. Composted versus raw olive mill waste as substrates for the production of medicinal mushrooms: an assessment of selected cultivation and quality parameters.

    Science.gov (United States)

    Zervakis, Georgios I; Koutrotsios, Georgios; Katsaris, Panagiotis

    2013-01-01

    Two-phase olive mill waste (TPOMW, "alperujo") is a highly biotoxic sludge-like effluent of the olive-oil milling process with a huge seasonal production. One of the treatment approaches that has so far received little attention is the use of TPOMW as substrate for the cultivation of edible mushrooms. Fifteen fungal strains belonging to five species (Basidiomycota), that is, Agrocybe cylindracea, Pleurotus cystidiosus, P. eryngii, P. ostreatus, and P. pulmonarius, were evaluated for their efficacy to colonize media composed of TPOMW, which was used either raw or composted in mixtures with wheat straw in various ratios. Qualified strains exhibited high values of biological efficiency (e.g., 120-135% for Pleurotus spp. and 125% for A. cylindracea) and productivity in subsequent cultivation experiments on substrates supplemented with 20-40% composted TPOMW or 20% raw TPOMW. Only when supplementation exceeded 60% for raw TPOMW, a negative impact was noted on mushroom yields which could be attributed to the effluent's toxicity (otherwise alleviated in the respective composted TPOMW medium). Earliness and mushroom size as well as quality parameters such as total phenolic content and antioxidant activity did not demonstrate significant differences versus the control wheat-straw substrate. The substrates hemicellulose content was negatively correlated with mycelium growth rates and yields and positively with earliness; in addition, cellulose: lignin ratio presented a positive correlation with mycelium growth and mushroom weight for A. cylindracea and with earliness for all species examined. TPOMW-based media revealed a great potential for the substitution of traditional cultivation substrates by valorizing environmentally hazardous agricultural waste.

  20. Use of Areca nut pericarp as a substrate for the straw mushroom (Volvariella volvacea cultivation

    Directory of Open Access Journals (Sweden)

    Sripheuk, P.

    2007-09-01

    Full Text Available Areca nut pericarp and pararubber sawdust were used as a substrates for Volvariella volvacea cultivation. The five formulas of substrates were used as spawing media : entirely Areca nut pericarp, Areca nut pericarp : pararubber sawdust (ratios 3:1, 1:1, 1:3 and entirely pararubber sawdust. Five kilograms of each substrates was spread in baskets for 15 days until harvesting time. The average yields obtained were 600.0 (B.E. = 34.20%, 250.0 (B.E. = 14.25%, 380.0 (B.E. = 21.66%, 250.0 (B.E. = 14.25% and 330.0 (B.E. = 18.81% g/basket, respectively. Using entirely Areca nut pericarp gave thehighest yield, which was significantly different (p<0.05 from using entirely pararubber sawdust.

  1. Effect of olive mill waste (OMW) supplementation to Oyster mushrooms substrates on the cultivation parameters and fruiting bodies quality

    NARCIS (Netherlands)

    Ruiz-Rodriguez, A.; Soler-Rivas, C.; Polonia, I.; Wichers, H.J.

    2010-01-01

    Seven Oyster mushroom strains were cultivated in wheat straw (WS) bags supplemented with 0 up to 90% olive mill waste (OMW), a solid residue obtained from a two-phases olive oil production system. All mushroom strains could grow but high OMW concentrations resulted in a significant yield, biological

  2. Production of spent mushroom substrate hydrolysates useful for cultivation of Lactococcus lactis by dilute sulfuric acid, cellulase and xylanase treatment.

    Science.gov (United States)

    Qiao, Jian-Jun; Zhang, Yan-Fei; Sun, Li-Fan; Liu, Wei-Wei; Zhu, Hong-Ji; Zhang, Zhijun

    2011-09-01

    Spent mushroom substrate (SMS) was treated with dilute sulfuric acid followed by cellulase and xylanase treatment to produce hydrolysates that could be used as the basis for media for the production of value added products. A L9 (3(4)) orthogonal experiment was performed to optimize the acid treatment process. Pretreatment with 6% (w/w) dilute sulfuric acid at 120°C for 120 min provided the highest reducing sugar yield of 267.57 g/kg SMS. No furfural was detected in the hydrolysates. Exposure to 20PFU of cellulase and 200 XU of xylanase per gram of pretreated SMS at 40°C resulted in the release of 79.85 g/kg or reducing sugars per kg acid pretreated SMS. The dilute sulfuric acid could be recycled to process fresh SMS four times. SMS hydrolysates neutralized with ammonium hydroxide, sodium hydroxide, or calcium hydroxide could be used as the carbon source for cultivation of Lactococcus lactis subsp. lactis W28 and a cell density of 2.9×10(11)CFU/mL could be obtained. The results provide a foundation for the development of value-added products based on SMS. Copyright © 2011 Elsevier Ltd. All rights reserved.

  3. Conversion of spent mushroom substrate to biofertilizer using a stress-tolerant phosphate-solubilizing Pichia farinose FL7.

    Science.gov (United States)

    Zhu, Hong-Ji; Sun, Li-Fan; Zhang, Yan-Fei; Zhang, Xiao-Li; Qiao, Jian-Jun

    2012-05-01

    To develop high-efficient biofertilizer, an environmental stress-tolerant phosphate-solubilizing microorganism (PSM) was isolated from agricultural wastes compost, and then applied to spent mushroom substrate (SMS). The isolate FL7 was identified as Pichia farinose with resistance against multiple environmental stresses, including 5-45°C temperature, 3-10 pH range, 0-23% (w/v) NaCl and 0-6M ammonium ion. Under the optimized cultivation condition, 852.8 mg/l total organic acids can be produced and pH can be reduced to 3.8 after 60 h, meanwhile, the soluble phosphate content reached 816.16 mg/l. The P. farinose was used to convert SMS to a phosphate biofertilizer through a semi-solid fermentation (SSF) process. After fermentation of 10 days, cell density can be increased to 5.6 × 10(8)CFU/g in biomass and pH in this medium can be decreased to 4.0. SMS biofertilizer produced by P. farinose significantly improved the growth of soybean in pot experiments, demonstrating a tremendous potential in agricultural application. Copyright © 2012 Elsevier Ltd. All rights reserved.

  4. Defense Response and Suppression of Phytophthora Blight Disease of Pepper by Water Extract from Spent Mushroom Substrate of Lentinula edodes

    Directory of Open Access Journals (Sweden)

    Dae-Sun Kang

    2017-06-01

    Full Text Available The spent mushroom substrate (SMS of Lentinula edodes that was derived from sawdust bag cultivation was used as materials for controlling Phytophthora blight disease of pepper. Water extract from SMS (WESMS of L. edodes inhibited mycelial growth of Phytophthora capsici, suppressed Phytophthora blight disease of pepper seedlings by 65% and promoted growth of the plant over 30%. In high performance liquid chromatography (HPLC analysis, oxalic acid was detected as the main organic acid compound in WESMS and inhibited the fungal mycelium at a minimum concentration of 200 mg/l. In quantitative real-time PCR, the transcriptional expression of CaBPR1 (PR protein 1, CaBGLU (β-1,3-glucanase, CaPR-4 (PR protein 4, and CaPR-10 (PR protein 10 were significantly enhanced on WESMS and DL-β-aminobutyric acid (BABA treated pepper leaves. In addition, the salicylic acid content was also increased 4 to 6 folds in the WESMS and BABA treated pepper leaves compared to water treated leaf sample. These findings suggest that WESMS of L. edodes suppress Phytophthora blight disease of pepper through multiple effects including antifungal activity, plant growth promotion, and defense gene induction.

  5. Valorization of spent oyster mushroom substrate and laccase recovery through successive solid state cultivation of Pleurotus, Ganoderma, and Lentinula strains.

    Science.gov (United States)

    Economou, Christina N; Diamantopoulou, Panagiota A; Philippoussis, Antonios N

    2017-06-01

    Spent mushroom substrate (SMS) of Pleurotus ostreatus was supplemented with wheat bran and soybean flour in various proportions to obtain C/N ratios of 10, 20, and 30, and their effect was evaluated in successive cultivation of Pleurotus ostreatus, Pleurotus pulmonarius, Ganoderma adspersum, Ganoderma resinaceum, and Lentinula edodes strains with respect to mycelium growth rate, biomass concentration, recovery of the enzyme laccase and crude exopolysaccharides, and also with additional fruiting body production. All fungi showed the highest growth rate on unamended SMS (C/N 30), with G. resinaceum being the fastest colonizer (Kr = 9.84 mm day -1 ), while biomass concentration maximized at C/N 10. Moreover, supplementation affected positively laccase activity, with P. pulmonarius furnishing the highest value (44,363.22 U g -1 ) at C/N 20. On the contrary, L. edodes growth, fruiting, and laccase secretion were not favored by SMS supplementation. Fruiting body formation was promoted at C/N 30 for Ganoderma and at C/N 20 for Pleurotus species. Exopolysaccharide production of further studied Pleurotus strains was favored at a C/N 20 ratio, at the initial stage of SMS colonization. The obtained results support the potential effective utilization of supplemented SMS for laccase production from Ganoderma spp. and for new fruiting body production of Pleurotus spp.

  6. Effect of spent mushroom substrate as a bulking agent on gaseous emissions and compost quality during pig manure composting.

    Science.gov (United States)

    Li, Shuyan; Li, Danyang; Li, Jijin; Li, Yangyang; Li, Guoxue; Zang, Bing; Li, Yun

    2018-05-01

    The aim of this study was to investigate the gaseous emissions (CH 4 , N 2 O, and NH 3 ) and compost quality during the pig manure composting by adding spent mushroom substrate (SMS) as a bulking agent. The control treatment was also studied using corn stalk (CS) as a bulking agent. The experiment was conducted in a pilot scale composting reactor under aerobic condition with the initial C/N ratio of 20. Results showed that bulking agents significantly affected gaseous emissions and compost quality. Using SMS as a bulking agent improved composting efficiency by shortening the time for maturity. SMS increased germination index and humic acid of the final compost (by 13.44 and 41.94%, respectively) compared with CS. Furthermore, composting with SMS as a bulking agent could reduce nitrogen loss, NH 3 , and N 2 O emissions (by 13.57, 35.56, and 46.48%, respectively) compared with the control. SMS slightly increased CH 4 emission about 1.1 times of the CS. However, a 33.95% decrease in the global warming potential of CH 4 and N 2 O was obtained by adding SMS treatment. These results indicate that SMS is a favorable bulking agent for reducing gaseous emissions and increasing compost quality.

  7. Bioconversion of lignocellulosic residues by Agrocybe cylindracea and Pleurotus ostreatus mushroom fungi--assessment of their effect on the final product and spent substrate properties.

    Science.gov (United States)

    Koutrotsios, Georgios; Mountzouris, Konstantinos C; Chatzipavlidis, Iordanis; Zervakis, Georgios I

    2014-10-15

    Nine agro-industrial and forestry by-products were subjected to solid-state fermentation by Agrocybe cylindracea and Pleurotus ostreatus, and the process and end-products were comparatively evaluated. Grape marc waste plus cotton gin trash was the best performing medium for both fungi, while substrate composition had a marked effect on most cultivation parameters. Biological efficiency was positively correlated with nitrogen, lignin and ash, and negatively with hemicelluloses and carbohydrate content of substrates. Spent substrates demonstrated high reductions in hemicelluloses and cellulose in contrast to lignin; fibre fractions were correlated with nitrogen, fat and ash content of initial materials, while residual mycelial biomass was affected by mushroom productivity. Mushroom proximate analysis revealed significant variations of constituents depending on the substrate. Crude protein and fat were correlated with substrates nitrogen for both species. Alternative cultivation substrates of high potential are proposed, while spent material could be exploited as animal feed due to its upgraded properties. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Leaching of two fungicides in spent mushroom substrate amended soil: Influence of amendment rate, fungicide ageing and flow condition.

    Science.gov (United States)

    Álvarez-Martín, Alba; Sánchez-Martín, María J; Ordax, José M; Marín-Benito, Jesús M; Sonia Rodríguez-Cruz, M

    2017-04-15

    A study has been conducted on the leaching of two fungicides, tebuconazole and cymoxanil, in a soil amended with spent mushroom substrate (SMS), with an evaluation of how different factors influence this process. The objective was based on the potential use of SMS as a biosorbent for immobilizing pesticides in vulnerable soils, and the need to know how it could affect the subsequent transport of these retained compounds. Breakthrough curves (BTCs) for 14 C-fungicides, non-incubated and incubated over 30days, were obtained in columns packed with an unamended soil (S), and this soil amended with SMS at rates of 5% (S+SMS5) and 50% (S+SMS50) under saturated and saturated-unsaturated flows. The highest leaching of tebuconazole (>50% of the total 14 C added) was found in S when a saturated water flow was applied to the column, but the percentage of leached fungicide decreased when a saturated-unsaturated flow was applied in both SMS-amended soils. Also a significant decrease in leaching was observed for tebuconazole after incubation in the column, especially in S+SMS50 when both flows were applied. Furthermore, cymoxanil leaching was complete in S and S+SMS when a saturated flow was applied, and maximum peak concentrations were reached at 1pore volume (PV), although BTCs showed peaks with lower concentrations in S+SMS. The amounts of cymoxanil retained only increased in S+SMS when a saturated-unsaturated flow was applied. A more relevant effect of SMS for reducing the leaching of fungicide was observed when cymoxanil was previously incubated in the column, although mineralization was enhanced in this case. These results are of interest for extending SMS application on the control of the leaching of fungicides with different physicochemical characteristics after different ageing times in the soil and water flow conditions applied. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Use of medicinal plants in different composts for yield improvement of various strains of oyster mushroom

    International Nuclear Information System (INIS)

    Inam-ul-Haq, M.; Khan, M.N.; Khan, M.A.; Khan, M.A.; Javed, N.; Binyamin, R.; Irshad, G.

    2010-01-01

    Different of concentration of four medicinal plants viz., Eucalyptus camaldulensis, Azadirachta indica, Citrus lemon, Cymbopogon marginatus were investigated for the effect of certain active components in their parts, capable of increasing mushroom yield and controlling mushrooms pathogenic microbes which cause great loss in mushroom yield. Four strains of Oyster mushroom were selected on the basis of their well mycelial growth on MEA. For selection of best compost simple composts were also prepared without any medicinal plant products i.e., cotton, wheat, paddy straw. Corn stover composts and cotton compost gave the maximum yield. The dried leaves of the Citrus lemons, lemon grass and Neem cake (dried) were crushed, and the sawdust of the logs of Eucalyptus were incorporated with different doses of 2%, 3%, 4%, 5% w/w of substrates with cotton substrate before compost fermentation. Each of the compost bag having specific medicinal plant product with specific concentration were spawned with selected four strains of Oyster mushroom i.e., two local strain Pleurotus florida (P-17), Pleurotus ostreatus (P- 19) and two exotic strains Pleurotus (florida) ostreatus (WC536), Pleurotus ostreatus (WC-522). Spawn running and mushroom fruitification were allowed to develop under optimum environmental condition. The mushroom yield data of compost bags with different concentration of medicinal plant products plants were calculated. The results showed that presence of Neem cake and Citrus lemon in the substrate increased the yield of Oyster mushroom strains i.e. Pleurotus florida) ostreatus (WC-536) followed by P. ostreatus (WC-522) strain. Neem cake and Citrus lemon were more promising in improving yield of mushroom. These results led to the conclusion that addition of specific medicinal plants concentration to compost increases the yield of Oyster mushroom by reducing the incidence of microbes and is more preferable than chemicals due to their lethal effects during human

  10. Effect of water extract from spent mushroom substrate after Ganoderma balabacense cultivation by using JUNCAO technique on production performance and hematology parameters of dairy cows.

    Science.gov (United States)

    Liu, Yanling; Zhao, Chao; Lin, Dongmei; Lin, Hui; Lin, Zhanxi

    2015-09-01

    The spent mushroom substrate of Ganoderma balabacense cultivation (SMSGB) contains a large amount of bioactive substances. However, the potentials of SMSGB for improving milk production in dairy cows have not been thoroughly studied. In this study, the effects of hot water extract (HWE) from spent mushroom substrate after G. balabacense cultivated with JUNCAO, the herbaceous plants long-known to be suitable for cultivating edible and medicinal fungi, on production performance and hematology parameters of dairy cows, were determined. Holstein dairy cows were fed different doses of HWE. After a 60-day administration period with 100 g/day of HWE, milk yield, milk protein and triglyceride (TG) levels increased by 4.02% (P < 0.01), 4.49% (P < 0.05) and 32.65% (P < 0.05), respectively; somatic cell count (SCC) and alanine aminotransferase (ALT) were significantly decreased (P < 0.05). The production performance of dairy cows suggests that HWE with SMSGB treatment is effective in improving milk yield (P < 0.01) and hematology parameters of dairy cows, and may be useful as a functional feed additive. © 2015 Japanese Society of Animal Science.

  11. Effect of pig manure on the chemical composition and microbial diversity during co-composting with spent mushroom substrate and rice husks.

    Science.gov (United States)

    Meng, Xingyao; Liu, Bin; Xi, Chen; Luo, Xiaosha; Yuan, Xufeng; Wang, Xiaofen; Zhu, Wanbin; Wang, Hongliang; Cui, Zongjun

    2018-03-01

    In this study, the impact of pig manure on the maturity of compost consisting of spent mushroom substrate and rice husks was accessed. The results showed that the addition of pig manure (SMS-PM) reached 50°C 5days earlier and lasted 15days longer than without pig manure (SMS). Furthermore, the addition of pig manure improved nutrition and germination index. High-throughput 16S rRNA pyrosequencing was used to evaluate the bacterial and fungal composition during the composting process of SMS-PM compared to SMS alone. The SMS treatment showed a relatively higher abundance of carbon-degrading microbes (Bacillaceae and Thermomyces) and plant pathogenic fungi (Sordariomycetes_unclassified) at the end of the compost. In contrast, the SMS-PM showed an increased bacterial diversity with anti-pathogen (Pseudomonas). The results indicated that the addition of pig manure improved the decomposition of refractory carbon from the spent mushroom substrate and promoted the maturity and nutritional content of the compost product. Copyright © 2017. Published by Elsevier Ltd.

  12. Optimization Of Activated Carbon Preparation From Spent Mushroom Farming Waste (SMFW) Via Box- Behnken Design Of Response Surface Methodology

    International Nuclear Information System (INIS)

    Nurul Shuhada Md Desa; Zaidi Ab Ghani; Suhaimi Abdul-Talib; Chia-Chay, T.

    2016-01-01

    This study focuses on activated carbon preparation from spent mushroom farming waste (SMFW) via chemical activation using Box-Behnken design (BBD) of Response Surface Methodology (RSM). Potassium hydroxide (KOH) functions as activating reagent and it play an important role in enhancing the activated carbon porosity. Three input parameters and two responses were evaluated via this software generated experimental design. The effects of three preparation parameters of impregnation ratio, activation time and activation temperature as well as two responses of carbon yield and iodine number were investigated. The optimum conditions for preparing activated carbon from SMFW was found at SMFW: KOH impregnation ratio of 0.25, activation time of 30 min and activation temperature of 400 degree Celsius which resulted in 28.23 % of carbon yield and 314.14 mg/ g of iodine number with desirability of 0.994. The predicted results were well corresponded with experimental results. This study is important in economical large scale SMFW activated carbon preparation for application study of adsorption process for metal treatment in wastewater with minimum chemical and energy input. (author)

  13. Preparation of homogeneous isotopic targets with rotating substrate

    International Nuclear Information System (INIS)

    Xu, G.J.; Zhao, Z.G.

    1993-01-01

    Isotopically enriched accelerator targets were prepared using the evaporation-condensation method from a resistance heating crucible. For high collection efficiency and good homogeneity the substrate was rotated at a vertical distance of 1.3 to 2.5 cm from the evaporation source. Measured collection efficiencies were 13 to 51 μg cm -2 mg -1 and homogeneity tests showed values close to the theoretically calculated ones for a point source. Targets, selfsupporting or on backings, could be fabricated with this method for elements and some compounds with evaporation temperatures up to 2300 K. (orig.)

  14. Preparation of mesoporous silica films SBA-15 over different substrates

    International Nuclear Information System (INIS)

    Campos, V.O.; Sousa, E.M.B. de; Macedo, W.A.A.

    2010-01-01

    Mesoporous materials have been target of frequent interest due to its wide application possibilities, for example development of gas sensors, catalysis, molecules transportation, pharmaceuticals release, synthesis of auto-organized nanostructures, among others. The possibilities of application are enhanced when such materials are disposed in the form of thin and ultrathin films. In this work the preparation of mesoporous SBA-15 silica films is explored by means of the dipcoating technique of a sol-gel on different substrates (glass slides, stainless steel, copper), using the surfactant poly(ethylene glycol)-block-poly(propylene glycol)- block-poly(ethylene glycol), known as P123, a block copolymer. Synthesis parameters surfactant concentration, aging time and temperature were investigated. In this work we present the morphological and structural characterization of the prepared films, which were obtained using atomic force microscopy and x-ray fluorescence and diffraction. (author)

  15. Selenium in edible mushrooms.

    Science.gov (United States)

    Falandysz, Jerzy

    2008-01-01

    Selenium is vital to human health. This article is a compendium of virtually all the published data on total selenium concentrations, its distribution in fruitbody, bioconcentration factors, and chemical forms in wild-grown, cultivated, and selenium-enriched mushrooms worldwide. Of the 190 species reviewed (belonging to 21 families and 56 genera), most are considered edible, and a few selected data relate to inedible mushrooms. Most of edible mushroom species examined until now are selenium-poor (cesarea, A. campestris, A. edulis, A. macrosporus, and A. silvaticus. A particularly rich source of selenium could be obtained from selenium-enriched mushrooms that are cultivated on a substrate fortified with selenium (as inorganic salt or selenized-yeast). The Se-enriched Champignon Mushroom could contain up to 30 or 110 microg Se/g dw, while the Varnished Polypore (Ganoderma lucidum) could contain up to 72 microg Se/g dw. An increasingly growing database on chemical forms of selenium of mushrooms indicates that the seleno-compounds identified in carpophore include selenocysteine, selenomethionine, Se-methylselenocysteine, selenite, and several unidentified seleno-compounds; their proportions vary widely. Some aspects of environmental selenium occurrence and human body pharmacokinetics and nutritional needs will also be briefly discussed in this review.

  16. Utilización de compost agotado de champiñón como capa de coberturas en nuevos ciclos de producción Using spent mushroom substrate as casing layers in new growing cycles

    Directory of Open Access Journals (Sweden)

    Arturo Pardo-Giménez

    2010-10-01

    Full Text Available El objetivo de este trabajo fue evaluar el comportamiento agronómico de seis mezclas de cobertura, elaboradas a partir de sustrato postcultivo del champiñón Agaricus bisporus, en nuevos ciclos de cultivo. Los resultados obtenidos mostraron la viabilidad de la reintroducción del sustrato en nuevos ciclos de cultivo, ya sea como material de base único, si se somete a un proceso de lavado para eliminar sales solubles, o bien mezclado con otros materiales de baja conductividad, como es el caso de la turba rubia o la fibra de coco. Se destacan los altos valores de eficiencia biológica registrados, que llegaron hasta los 100 kg kg-1 de compost, similares a los proporcionados por los testigos, y los altos valores relativos observados (con respecto a los testigos en el contenido en materia seca de los carpóforos cosechados con algunas de las nuevas coberturas elaboradas. Esta reutilización del compost constituye una alternativa interesante, con vistas a reemplazar a las tierras y a los sustratos orgánicos utilizados habitualmente como cobertura, con la doble ventaja de disminuir los costos de elaboración y el impacto ambiental.The objective of this work was to evaluate the agronomic behaviour of six mixtures of casing, prepared from spent mushroom substrate (SMS, in new production cycles of Agaricus bisporus. The results obtained showed the feasibility of reuse of the SMS in new cultivation cycles when used alone by submitting it to a washing process to remove soluble salts, or mixed with other materials of low conductivity, such as Sphagnum peat or coconut fiber pith. The high values of biological efficiency recorded up to 100 kg kg-1 compost, similar to that of the controls, and the same high values observed in the dry matter content of the mushrooms harvested with some of the new casing layers prepared must be highlighted. The suggested use for SMS is an important alternative to consider, in order to replace soils and other organic

  17. Effect of oyster mushroom ( Pleurotus ostreatus ) mycelia on ...

    African Journals Online (AJOL)

    Effect of oyster mushroom ( Pleurotus ostreatus ) mycelia on petroleum ... of chains of hydrocarbon in a petroleum-hydrocarbon-contaminated substrate over time. ... Keywords: Mycoremediation, Mycelia, Contaminated Soil, Oyster Mushroom ...

  18. Oyster mushroom (Pleurotus spp.) cultivation technique using re ...

    African Journals Online (AJOL)

    SARAH

    2014-08-31

    Aug 31, 2014 ... using re-usable substrate containers and comparison of ... oyster mushrooms in combination with other vegetables complements availability of various essential ..... higher than from oyster mushrooms produced from any.

  19. Preparation and Wetting Behavior of Lyophobic Surface on Zinc Substrate

    Directory of Open Access Journals (Sweden)

    HAN Xiang-xiang

    2018-03-01

    Full Text Available Micro-nano structure on zinc substrate was fabricated through the combination of chemical etching with hydrochloric acid aqueous solution and hydrothermal reaction. After modification with perfluorooctanoic solution, the lyophobic surface was prepared. The phase composition, microstructure, chemical composition, and wettability of the as-obtained surface were investigated by X-ray diffractometer, scanning electron microscope, Fourier transform infrared spectrometer, and contact angle tester. The results show that a layer of ZnO nano-rods grows on the surface of the submicrometer structure, and exhibits good resistance to water impact and stability under the combined action of low surface energy material. When hydrochloric acid concentration is 1.0mol/L and hydrothermal reaction temperature is 95℃, the lyophobic surface possesses the best morphology of ZnO nano-rods. The maximum contact angles of distilled water and peanut oil are 154.65° and 144.65°, respectively, and the sliding angle is less than 10°.

  20. [Hallucinogenic mushrooms].

    Science.gov (United States)

    Reingardiene, Dagmara; Vilcinskaite, Jolita; Lazauskas, Robertas

    2005-01-01

    The group of hallucinogenic mushrooms (species of the genera Conocybe, Gymnopilus, Panaeolus, Pluteus, Psilocybe, and Stropharia) is psilocybin-containing mushrooms. These "magic", psychoactive fungi have the serotonergic hallucinogen psilocybin. Toxicity of these mushrooms is substantial because of the popularity of hallucinogens. Psilocybin and its active metabolite psilocin are similar to lysergic acid diethylamide. These hallucinogens affect the central nervous system rapidly (within 0.5-1 hour after ingestion), producing ataxia, hyperkinesis, and hallucinations. In this review article there are discussed about history of use of hallucinogenic mushrooms and epidemiology; pharmacology, pharmacodynamics, somatic effects and pharmacokinetics of psilocybin, the clinical effects of psilocybin and psilocin, signs and symptoms of ingestion of hallucinogenic mushrooms, treatment and prognosis.

  1. Effect of inclusion of oyster mushroom substrate on the in vitro fermentation kinetics of Brachiaria brizantha hay

    Directory of Open Access Journals (Sweden)

    Ricardo da Silva Oliveira

    2015-07-01

    Full Text Available The objective of this study was to evaluate the effect of inclusion of exhausted substrate of Pleurotus ostreatus on the in vitro fermentation of Brachiaria brizantha hay-based diets. The experiment was conducted using the semi-automated gas production technique. The ruminal inoculum was collected from three fistulated cattle kept on Brachiaria brizantha pasture. Brachiaria brizantha hay and exhausted substrate of Pleurotus production were used for composition of the diets: ES (100% exhausted substrate, BH (100% Brachiaria brizantha hay, ES5 (5% ES + 95% BH, ES20 (20% ES + 80% BH, and ES30 (30% ES + 70% BH. The experimental design was a 5x3 factorial scheme consisting of five treatments and three ruminal inocula. The degradation kinetics of dry matter (DM was determined after 96 hours of fermentation [D (96h]. No significant differences in the cumulative volume of gas (A were observed between BH (262.6 mL/g DM, ES5 (284.3 mL/g MS, ES20 (256.6 mL/g MS and ES30 (261.7 mL/g MS, indicating that inclusion of the substrate did not affect hay fermentation. A lower gas volume (165.9 mL and lower degradability (52% were observed for the ES diet, showing a lower nutritional value of this substrate compared to Brachiaria brizantha hay, probably due to the action of enzymes that degrade structural carbohydrates found in the mycelia of Pleurotus. The ES diet exhibited a shorter colonization time (L=2.6 h; P<0.05, a finding that may be attributed to the interaction between the mycelium and substrate, facilitating initial colonization. The inclusion of exhausted substrate did not increase microbial growth or degradation compared to the BH diet, but seems to have favored initial colonization of this substrate. The use of ES does not negatively affect colonization and may be used as an ingredient of ruminant diets.

  2. Preparative isolation of a cytotoxic principle of a forest mushroom Suillus luteus by sodium dodecyl sulfate based "salting-in" countercurrent chromatography.

    Science.gov (United States)

    Yang, Zhi; Hu, Xueqian; Wu, Shihua

    2016-02-01

    In the course of screening new anticancer natural products, an edible forest mushroom Suillus luteus (L. Ex Franch). Gray was found to have potent cytotoxicity against several human cancer cells. However, the lipophilic sample made some countercurrent chromatography solvent systems emulsify, which caused difficulties in the separation of its cytotoxic components. Here, we found that the addition of an organic salt sodium dodecyl sulfate could efficiently shorten the settling time of the mushroom sample solutions by eliminating the emulsification of two-phase solvent systems. Moreover, we found that sodium dodecyl sulfate could play a new "salting-in" role and made the partition coefficients of the solutes decrease with the increased concentrations. Thus, a sodium dodecyl sulfate based salting-in countercurrent chromatography method has been successfully established for the first time for preparative isolation of a cytotoxic principle of the mushroom. The active component was identified as isosuillin. Whole results indicated that sodium dodecyl sulfate could be used as an efficient salting-in reagent for two-phase solvent system selection and targeted countercurrent chromatography isolation. It is very useful for current natural products isolation and drug discovery. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Cultivation of Pleurotus ostreatus and other edible mushrooms.

    Science.gov (United States)

    Sánchez, Carmen

    2010-02-01

    Pleurotus ostreatus is the second most cultivated edible mushroom worldwide after Agaricus bisporus. It has economic and ecological values and medicinal properties. Mushroom culture has moved toward diversification with the production of other mushrooms. Edible mushrooms are able to colonize and degrade a large variety of lignocellulosic substrates and other wastes which are produced primarily through the activities of the agricultural, forest, and food-processing industries. Particularly, P. ostreatus requires a shorter growth time in comparison to other edible mushrooms. The substrate used for their cultivation does not require sterilization, only pasteurization, which is less expensive. Growing oyster mushrooms convert a high percentage of the substrate to fruiting bodies, increasing profitability. P. ostreatus demands few environmental controls, and their fruiting bodies are not often attacked by diseases and pests, and they can be cultivated in a simple and cheap way. All this makes P. ostreatus cultivation an excellent alternative for production of mushrooms when compared to other mushrooms.

  4. Effects of Cordyceps militaris spent mushroom substrate on mucosal and serum immune parameters, disease resistance and growth performance of Nile tilapia, (Oreochromis niloticus).

    Science.gov (United States)

    Doan, Hien Van; Hoseinifar, Seyed Hossein; Tapingkae, Wanaporn; Chitmanat, Chanagun; Mekchay, Supamit

    2017-08-01

    The aim of present study was determination effects of dietary administration of C. militaris spent mushroom substrate (SMS) on mucosal and serum immune parameters, disease resistance, and growth performance of Nile tilapia (Oreochromis niloticus). Two hundred twenty five fish of similar weight (37.28 ± 0.10 g) were assigned to the following diets [0 (T1- Control), 5 (T2), 10 (T3), 20 (T4) and 40 g kg -1 (T5) SMS]. After 60 days of feeding trial, growth performance, skin mucus lysozyme and peroxidase activities as well as serum innate immune were measured. In addition, survival rate and innate immune responses were calculated after challenge test (15 days) against Streptococcus agalactiae. The results revealed that regardless of inclusion levels, feeding Nile tilapia with SMS supplemented diets significantly increased skin mucus lysozyme and peroxidase activities as well as serum immune parameters (SL, ACH50, PI, RB, and RB) compared control group (P health status. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Cultivation of oyster mushroom ( Pleurotus spp.) on palm oil ...

    African Journals Online (AJOL)

    Oyster mushroom is a popular mushroom due to its nutritional, medicinal and potential commercial value. In Malaysia, the fungus is currently cultivated on sawdust and rice husk. In this study, the efficiency of cultivating oyster mushroom was assessed using palm oil mesocarp fibre as a substrate. The experiment consisted ...

  6. Characteristics of tungsten oxide thin films prepared on the flexible substrates using pulsed laser deposition

    International Nuclear Information System (INIS)

    Suda, Yoshiaki; Kawasaki, Hiroharu; Ohshima, Tamiko; Yagyuu, Yoshihito

    2008-01-01

    Tungsten trioxide (WO 3 ) thin films have been prepared on the flexible indium tin oxide (ITO) substrates by pulsed laser deposition (PLD) using WO 3 targets in oxygen gas. Color of the WO 3 film on the flexible ITO substrates depends on the oxygen gas mixture. The plasma plume produced by PLD using a Nd:YAG laser and WO 3 target is investigated by temporal and spatial-resolved optical emission spectroscopy. WO 3 films prepared on the flexible ITO substrates show electrochromic properties, even when the substrates are bent. The film color changes from blue to transparent within 10-20 s after the applied DC voltage is turned off

  7. Antioxidant Potential of Lingzhi or Reishi Medicinal Mushroom, Ganoderma lucidum (Higher Basidiomycetes) Cultivated on Artocarpus heterophyllus Sawdust Substrate in India.

    Science.gov (United States)

    Rani, P; Lal, Merlin Rajesh; Maheshwari, Uma; Krishnan, Sreeram

    2015-01-01

    The artificial cultivation of Ganoderma lucidum (MTCC1039) using Artocarpus heterophyllus as sawdust substrate was optimized and free radical scavenging activities of the generated fruiting bodies were investigated. The choice of A. heterophyllus as substrate was due to its easy availability in South India. Sawdust supplemented with dextrose medium yielded better spawn hyphae and early fruiting body initiation (15 days). The biological yield obtained was 42.06 ± 2.14 g/packet and the biological efficiency was 8.41 ± 0.48%. Both aqueous and methanolic extracts of fruiting body were analyzed for radical scavenging activity. Methanolic extract showed maximum scavenging activity for 1,1-diphenyl-2-picrylhydrazyl (IC50 = 290 μg/ml) and 2,2'-azino-bis(3-ethylbenzothiazoline- 6-sulphonic acid (IC50 = 580 μg/ml), whereas aqueous extract had better scavenging for ferric reducing antioxidant power (IC50 = 5 μg/ml). Total phenolic content and total antioxidant capacity were significantly higher in methanolic extract (p < 0.01). A positive correlation existed between the phenolic content and antioxidant activity. Our results indicated that fruiting bodies of G. lucidum cultivated in sawdust medium possess antioxidant property, which can be exploited for therapeutic application.

  8. Mushroom as a product and their role in mycoremediation

    OpenAIRE

    Kulshreshtha, Shweta; Mathur, Nupur; Bhatnagar, Pradeep

    2014-01-01

    Mushroom has been used for consumption as product for a long time due to their flavor and richness in protein. Mushrooms are also known as mycoremediation tool because of their use in remediation of different types of pollutants. Mycoremediation relies on the efficient enzymes, produced by mushroom, for the degradation of various types of substrate and pollutants. Besides waste degradation, mushroom produced a vendible product for consumption. However, sometimes they absorb the pollutant in t...

  9. Composto exaurido do cogumelo Agaricus blazei na dieta de frangos de corte Spent mushroom substrate of Agaricus blazei in broiler chicks diet

    Directory of Open Access Journals (Sweden)

    Alexandre Magno Batista Machado

    2007-08-01

    Full Text Available Avaliou-se o efeito da substituição de um antibiótico por diferentes níveis do composto exaurido do cogumelo (CEC Agaricus blazei sobre o desempenho de frangos de corte de 1 a 42 dias de idade. Foram avaliadas sete dietas, seis com adição de CEC (0,0; 0,2; 0,4; 0,6; 0,8 e 1,0% e uma com antibiótico (avilamicina 10 ppm. Foram utilizados 588 pintos de 1 dia de idade, distribuídos em um delineamento inteiramente casualizado, com seis repetições por dieta (três por sexo e 14 aves por unidade experimental. As aves que não receberam qualquer aditivo na dieta apresentaram os piores resultados de desempenho. Níveis de CEC superiores a 0,4% ocasionaram redução gradual no desempenho. O nível de 0,2% de CEC proporcionou o maior ganho de peso e o de 0,21%, a melhor conversão alimentar e o maior consumo de ração. À exceção do rendimento de peito e do rendimento de gordura abdominal, os aditivos não influenciaram os rendimentos de carcaça e dos cortes. O composto exaurido do cogumelo Agaricus blazei pode ser utilizado como aditivo alternativo ao antibiótico no nível de 0,2% da dieta, pois não prejudicou o desempenho produtivo e o rendimento de carcaça das aves.The effect of the substitution of an antibiotic by different levels of spent mushroom substrate (SMS of Agaricus blazei on the performance of broiler chicks from 1 to 42 days old was evaluated. Seven diets were evaluated, six with SMS addiction (0.0, 0.2, 0.4, 0.6, 0.8, and 1.0% and one with antibiotic (avilamycin 10 ppm. A total of 588 one day old chicks was allotted to a complete randomized design, with six replications per diet (three per sex and 14 birds per experimental unit. The birds fed diet with any additive showed the worst performance results. Levels of SMS above 0.4% caused gradual reduction in the performance. The level of 0.2% of SMS provided the highest value of weight gain and of 0.21% promoted the best feed conversion and the highest value of feed intake

  10. Preparation and Characterization of Acrylic Primer for Concrete Substrate Application

    Directory of Open Access Journals (Sweden)

    El-Sayed Negim

    2016-01-01

    Full Text Available This study dealt with the properties of acrylic primer for concrete substrate using acrylic syrup, made from a methyl methacrylate monomer solution of terpolymers. Terpolymer systems consisting of methyl methacrylate (MMA, 2-ethylhexyl acrylate (2-EHA, and methacrylic acid (MAA with different chemical composition ratios of MMA and 2-EHA were synthesized through bulk polymerization using azobisisobutyronitrile (AIBN as initiator. The terpolymer composition is characterized by FTIR, 1H NMR, DSC, TGA, and SEM. The glass transition temperature and the thermal stability increased with increasing amounts of MMA in the terpolymer backbone. The effect of chemical composition of terpolymers on physicomechanical properties of primer films was investigated. However, increasing the amount of MMA in terpolymer backbone increased tensile and contact angle of primer films while elongation at break, water absorption, and bond strength are decreased. In particular, the primer syrup containing 65% 2-EHA has good bonding strength with concrete substrate around 1.1 MPa.

  11. Characterization and Antiproliferative Effect of Novel Acid Polysaccharides from the Spent Substrate of Shiitake Culinary-Medicinal Mushroom Lentinus edodes (Agaricomycetes) Cultivation.

    Science.gov (United States)

    Zhang, Yong; Liu, Wei; Xu, Chunping; Huang, Wei; He, Peixin

    2017-01-01

    In this study, a high yield of crude polysaccharide (16.73 ± 0.756%) was extracted from the spent mushroom substrate of Lentinus edodes using a hot alkali extraction method. Two groups of polysaccharides (designated as LSMS-1 and LSMS-2) were obtained from the crude extract by size exclusion chromatography (SEC), and their molecular characteristics were examined by a multiangle laser-light scattering (MALLS) and refractive index detector system. The weight-average molar masses of LSMS-1 and LSMS-2 were determined to be 6.842 × 106 and 2.154 × 106 g/mol, respectively. The SEC/MALLS analysis revealed that the molecular shapes of LSMS-1 and LSMS-2 were sphere-like forms in aqueous solution. Carbohydrate composition analysis using chromatography--mass spectrometry revealed that they were both acid heteropolysaccharides. LSMS-1 comprised mainly glucose and galacturonic acid, whereas LSMS-2 mainly consisted of xylose and glucuronic acid. Fourier transform infrared spectral analysis of the purified fractions revealed typical characteristic polysaccharide groups. In addition, MTT assays with refined polysaccharide doses of 25, 50, 100, 200, and 400 µg/mL suggested that both of the polysaccharide fractions exhibited antiproliferative activity against 6 tested human tumor cell lines in a concentration-dependent manner, and LSMS-2 had better anticancer capacity in vitro than LSMS-1. The inhibition ratio of LSMS-2 against A549 human lung cancer cells, the SGC7901 gastric cancer cell line, MCF-7 breast cancer cells, the U937 histiocytic lymphoma cell line, and the MG-63 human osteosarcoma cell line reached 43.55%, 29.97%, 19.63%, 18.24%, and 17.93%, respectively, at a concentration of 400 µg/mL.

  12. Identification of the potential of microbial combinations obtained from spent mushroom cultivation substrates for use in textile effluent decolorization.

    Science.gov (United States)

    Singh, Rajender; Ahlawat, O P; Rajor, Anita

    2012-12-01

    The study presents variation in microbial population of Agaricus bisporus, Pleurotus sajor-caju and Volvariella volvacea spent substrates (SMS) along with ligninolytic enzymes activity and textile effluent decolorization potential of microorganisms isolated from these. The effect of temperature, pH, carbon sources and immobilizing agents on effluent decolorization using different combinations of these microorganisms has also been studied. SMS of P. sajor-caju harbored highest population and diversity of bacteria and fungi compared to other SMSs. Schizophyllum commune and Pezizomycotina sp. from P. sajor-caju SMS, exhibited highest activities of laccase (11.8 and 8.32U mL(-1)) and lignin peroxidase (339 and 318 UL(-1)), while Pseudomonas fluorescens of Manganese peroxidase. Highest decolorization was in presence of glucose and sucrose at 30°C, and microbial consortium comprised of the immobilized forms of S. commune and Pezizomycotina sp. on wheat straw and broth cultures of P. fluorescens, Bacillus licheniformis and Bacillus pumilus. Copyright © 2012 Elsevier Ltd. All rights reserved.

  13. Purification of polluted water with spent mushroom (Agaricus bisporus) substrate: from agricultural waste to biosorbent of phenanthrene, Cd and Pb.

    Science.gov (United States)

    García-Delgado, C; Alonso-Izquierdo, M; González-Izquierdo, M; Yunta, F; Eymar, E

    2017-07-01

    The present research was aimed to (i) report the recycling of spent A. bisporus substrate (SAS) to remove heavy metals (Cd and Pb) and phenanthrene (Phe) from polluted water and (ii) assess the possibility to use the treated water for irrigation. Batch experiments were carried out to assess, firstly, the effect of interaction time between pollutants with SAS and, secondly, the pH of the polluted water. Then a biofilter was designed by using pressurized glass columns. Chemical parameters such as pH, electrical conductivity and content of Pb, Cd, Phe, nutrients (NPK) and Cl - were determined. Equilibrium for contaminants was quickly reached (1-2 h). The pH of the polluted water was the key factor for pollutants' adsorption. The polluted water's pH was increased after biofilter interaction. Phe was not detected in any fraction. Pb and Cd sorption rates were higher than 99%. The pollutant concentrations were within the permitted range to be used for agriculture purposes. Purified water showed significant concentrations of NPK, indicating its potential use as fertilizer. The SAS shows potential to be used as Phe, Pb and Cd biosorbent and the resulting treated water can be used for irrigation according to pollutant contents and agronomical evaluation.

  14. Preparation, characterization and antioxidant activity of polysaccharide from spent Lentinus edodes substrate.

    Science.gov (United States)

    Zhu, Hongji; Tian, Li; Zhang, Lei; Bi, Jingxiu; Song, Qianqian; Yang, Hui; Qiao, Jianjun

    2018-06-01

    This study explored the potential of spent Lentinus edodes substrate, a by-product of mushroom industries causing environmental pollution, serving as materials to produce antioxidant polysaccharide. The extraction process of spent Lentinus edodes substrate polysaccharide (SLSP) was optimized and the effects of drying methods on chemical composition, morphological property and antioxidant activity were investigated. Results showed that freeze-dried SLSP (SLSP-F) exhibited the best quality in terms of the polysaccharide yield (13.00%) and antioxidant activity. The EC 50 values of SLSP-F on DPPH, ABTS and superoxide anion radicals was 0.051mg/mL, 0.379mg/mL, 0.719mg/mL, respectively, which was significantly lower than that of freeze-dried Lentinus edodes polysaccharide (LP-F). After purification by Sephadex G-150, the purified SLSP-F (PSP) has a molecular weight of 16.77kDa. Compared with LP-F, PSP has more reducing sugars and uronic acids in chemical composition and higher contents of xylose, glucose and galactose in monosaccharide composition. FT-IR and NMR spectroscopy analysis revealed that PSP has both α and β glycosidic bonds and massive acetyl groups, which is different from LP-F mainly composed of 1, 3 linked α-D-Manp residue with some acetyl groups. The findings provided a reliable approach for the development of antioxidant polysaccharide from spent Lentinus edodes substrate. Copyright © 2018 Elsevier B.V. All rights reserved.

  15. Bioconcentration of artificial radionuclides in edible mushrooms: in situ and in vitro studies

    Energy Technology Data Exchange (ETDEWEB)

    Dementyev, Dmitry V.; Manukovsky, Nikolai S.; Bolsunovsky, Alexander Ya.; Alexandrova, Yuliyana V. [Institute of Biophysics, Siberian Branch of the Russian Academy of Sciences, 660036, Krasnoyarsk (Russian Federation)

    2014-07-01

    grown on the soil-like substrate showed that accumulation of Am-241 from solution by mycelium of Pleurotus ostreatus and Neonothopanus nimbi reached 97%. Hence, these mushroom species can be used for bioremediation of solutions contaminated by radionuclides. The substrates prepared from Yenisei flood plain soils and bottom sediments, which contained Co-60, Cs-137, and Eu-152 and were also supplemented with Am-241, were used to grow fruiting bodies of P. ostreatus. The analysis showed that the fruiting bodies accumulated only Cs-137 and Am-241. The highest CF of Cs-137 by P. ostreatus grown on the sediment-based substrate was an order of magnitude higher than the CF of Cs-137 by the mushrooms grown on the soil-based substrate (0.1 vs. 0.008), due to differences in Cs-137 bioavailability in soil and sediment. Also, the CF of Am-241 was twice higher in the fruiting bodies grown on the sediment-based substrate than in those grown on the soil-based substrate (0.005 vs. 0.0026). Analysis of the CFs showed that under natural conditions, accumulation rates of Cs-137 by mushrooms were an order of magnitude higher than those of U-238. Under laboratory conditions, accumulation of Cs-137 in fruiting bodies was an order of magnitude greater than accumulation of Am-241, a transuranium radionuclide. The ability of mushrooms to accumulate artificial radionuclides makes them good candidates for bioremediation of contaminated solutions and soils. (authors)

  16. Preparation of Pb(Zr, Ti)O3 Thin Films on Glass Substrates

    Science.gov (United States)

    Hioki, Tsuyoshi; Akiyama, Masahiko; Ueda, Tomomasa; Onozuka, Yutaka; Hara, Yujiro; Suzuki, Kouji

    2000-09-01

    Lead-zirconate-titanate (PZT) thin films were prepared on non-alkaline glass substrates widely used in liquid crystal display (LCD) devices, by plasma-assisted magnetron RF sputtering with an immersed coil. After preparation of the PZT thin film, the glass was available for use in LCD device processing. No mutual diffusion of the elements was recognized between the glass substrate and the bottom electrode. The PZT layer had a dense film structure with rectangular and columnar grains, and only its perovskite phase was crystalline. PZT thin films on a glass substrate had leakage current densities of about 10-8 A/cm2, acceptable hysteresis loop shapes with the remanent polarization (Pr) of 45 μC/cm2 and the coercive field (Ec) of 90 kV/cm. Ferroelectric properties on a glass substrate almost conform with those on a Si-based substrate.

  17. Oyster Mushroom

    African Journals Online (AJOL)

    The pastoralists have been hopelessly trying to get rid of the bush through ... mushroom cultivation the mentioned problems can be solved yielding nutritious ..... Mean values within the same column with no common superscript letter differ at the 95% confidence level and the .... Encroachment in the Borana Low Land.

  18. Radiocesium uptake mechanisms in wild and culture mushrooms

    International Nuclear Information System (INIS)

    Sugiyama, Hideo; Terada, Hiroshi; Isomura, Kimio; Tsukada, Hirofumi; Shibata, Hisashi.

    1993-01-01

    Concentrations of 137 Cs and stable Cs in wild mushrooms, cultivated mushrooms and those substrates were measured by gamma-ray spectrometry and neutron activation analysis. The average concentration of 137 Cs in 80 wild mushrooms in Japan was 87.5 Bq/kg (wet wt.), and concentration of 137 Cs in mycorrhizal mushrooms was higher than that of saprophytic mushrooms. High concentrations of 137 Cs were found in Pleurotus ostreatus (Fr.) Kummer Y-1, saprophytic mushrooms, cultivated in culture substrates containing high 137 Cs. Clear correlations with 5% level of significance were found between wild mushroom-to-substrate ratios (wet/dry) of 137 Cs concentration and those of stable Cs. Cultivated P. ostreatus-to-culture substrate ratios (wet/wet) of 137 Cs concentration were stable in the order of 10 0 when the culture substrate was containing 10 000 Bq/kg (wet wt.) of 137 Cs or 1 000 mg/kg (wet wt.) of stable Cs. The ratios of 137 Cs concentration in cultivated mushrooms were about equal to those in wild mushrooms. Higher concentration of 137 Cs in culture substrate after sampling P. ostreatus was observed at the upper layer where mycelium density was high. (author)

  19. Preparation and characterisation of polymeric lamellar substrate particles (PLSP)

    International Nuclear Information System (INIS)

    Khairullah, Noor Hasnah Mohamed

    2002-01-01

    Polymer microparticles have tremendous potential as the next generation of adjuvant systems to replace the only adjuvant currently widely registered for human use, alum. Based on aluminium salts, alum adjuvants work as short-term depots of adsorbed protein/antigens that slowly 'leak' into the body's immune system, inducing immunity by invoking a humoral response. The main disadvantage of alum adjuvants is that they do not raise sufficient antibody levels to induce long-term immunity. Hence, booster administrations are required. This drawback presents the biggest factor in the failure of many vaccination programmes. Polymer microparticulate systems can be fashioned to deliver sub-unit and peptide antigens in a continuous or controlled rate over a desired period of time, avoiding the need for booster doses. The design of mucosal vaccines is now centred upon the use of these polymeric carriers. The mucosal route for immunisation has many advantages over the more conventional systemic route, the most important of which, is the induction of both humoral and cellular immunity. Polymer microspheres of sizes <10μm are especially good candidates as oral vaccine adjuvants as they are taken up by the M cells of the Peyer's patches in the intestine. Numerous studies have been carried out on microspheres into which antigens have been encapsulated or entrapped. There are, however, problems associated with loss of antigenicity since formulation procedures involve the use of organic solvents and harsh shearing methods. Additionally, these antigens may be further degraded when the polymer material itself degrades in vivo and produces acidic species. A novel adjuvant system that avoids the above problems is currently being evaluated. Poly(l-lactide) (PLLA) polymeric lamellar substrate particles (PLSP) are promising as novel adjuvants for the controlled release of antigens. Reports have shown that the adsorption of antigens onto the surface of these particles can induce cellular

  20. Radiolytic preparation of thin Au film directly on resin substrate using high-energy electron beam

    Energy Technology Data Exchange (ETDEWEB)

    Ohkubo, Yuji, E-mail: okubo@upst.eng.osaka-u.ac.jp [Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871 (Japan); Seino, Satoshi; Nakagawa, Takashi; Kugai, Junichiro [Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871 (Japan); Ueno, Koji [Japan Electron Beam Irradiation Service Ltd., 5-3 Ozushima, Izumiohtsu, Osaka 595-0074 (Japan); Yamamoto, Takao A. [Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871 (Japan)

    2016-04-01

    A novel method for preparing thin Au films directly on resin substrates using an electron beam was developed. The thin Au films were prepared on a resin substrate by the reduction of Au ions in an aqueous solution via irradiation with a high-energy electron beam (4.8 MeV). This reduction method required 7 s of the irradiation time of the electron beam. Furthermore, no reductant or catalyst was needed. As the concentration of Au ions in the precursor solution was increased, the amount of Au deposited on the resin substrate increased, too, and the structure of the prepared Au film changed. As a result, the film color changed as well. Cross-sectional scanning electron microscope images of the thus-prepared Au film indicated that the Au films were consisted of two layers: a particle layer and a bottom bulk layer. There was strong adhesion between the Au films and the underlying resin substrates. This was confirmed by the tape-peeling test and through ultrasonic cleaning. After both processes, Au remained on the resin substrates, while most of the particle-like moieties were removed. This indicated that the thin Au films prepared via irradiation with a high-energy electron beam adhered strongly to the resin substrates. - Highlights: • A thin gold (Au) film was formed by EBIRM for the first time. • The irradiation time of the electron beam was less than 10 s. • Thin Au films were obtained without reductant or catalyst. • Au films were consisted of two layers: a particle layer and a bottom bulk layer. • There was strong adhesion between the bottom bulk layer and the underlying resin substrates.

  1. The Type of Forage Substrate Preparation Included as Substrate in a RUSITEC System Affects the Ruminal Microbiota and Fermentation Characteristics

    Directory of Open Access Journals (Sweden)

    Alexandre V. Chaves

    2017-04-01

    Full Text Available In vitro fermentation systems such as the rumen simulation technique (RUSITEC are frequently used to assess dietary manipulations in livestock, thereby limiting the use of live animals. Despite being in use for nearly 40 years, improvements are continually sought in these systems to better reflect and mimic natural processes in ruminants. The aim of this study was to evaluate the effect of forage preparation, i.e., frozen minced (FM and freeze-dried and ground (FDG, on the ruminal microbiota and on fermentation characteristics when included as a substrate in a RUSITEC system. A completely randomized design experiment was performed over a 15-day period, with 7 days of adaptation and an 8-day experimental period. Fermentation parameters (total gas, CH4, and volatile fatty acid production were analyzed on a daily basis over the experimental period and the archaeal and bacterial microbiota (liquid-associated microbes [LAM] and solid-associated microbes [SAM] was assessed at 0, 5, 10, and 15 days using high-throughput sequencing of the 16S rRNA gene. Results from this study suggested a tendency (P = 0.09 of FM treatment to increase daily CH4 (mg/d production by 16.7% when compared with FDG treatment. Of the major volatile fatty acids (acetate, propionate, and butyrate, only butyrate production was greater (P = 0.01 with FM treatment compared with FDG substrate. The archaeal and bacterial diversity and richness did not differ between the forage preparations, although feed particle size of the forage had a significant effect on microbial community structure in the SAM and LAM samples. The Bacteroidetes phylum was more relatively abundant in the FM substrate treatment, while Proteobacteria was enriched in the FDG treatment. At the genus-level, Butyrivibrio, Prevotella, and Roseburia were enriched in the FM substrate treatment and Campylobacter and Lactobacillus in the FDG substrate treatment. Evidence from this study suggests that forage preparation

  2. Preparation of triangular and hexagonal silver nanoplates on the surface of quartz substrate

    International Nuclear Information System (INIS)

    Jia Huiying; Zeng Jianbo; An Jing; Song Wei; Xu Weiqing; Zhao Bing

    2008-01-01

    In this paper, triangular and hexagonal silver nanoplates were prepared on the surface of quartz substrate using photoreduction of silver ions in the presence of silver seeds. The obtained silver nanoplates were characterized by atomic force microscopy and UV-vis spectroscopy. It was found that the silver seeds played an important role in the formation of triangular and hexagonal silver nanoplates. By varying the irradiation time, nanoplates with different sizes and shapes could be obtained. The growth mechanism for triangular and hexagonal nanoplates prepared on quartz substrate was discussed

  3. An Exploration into the Bacterial Community under Different Pasteurization Conditions during Substrate Preparation (Composting-Phase II) for Agaricus bisporus Cultivation.

    Science.gov (United States)

    Vieira, Fabricio Rocha; Pecchia, John Andrew

    2018-02-01

    Substrate preparation (i.e., composting) for Agaricus bisporus cultivation is the most critical point of mushroom production. Among many factors involved in the composting process, the microbial ecology of the system is the underlying drive of composting and can be influenced by composting management techniques. Pasteurization temperature at the beginning of phase II, in theory, may influence the bacterial community and subsequently the "selectivity" and nutrition of the final substrate. Therefore, this hypothesis was tested by simulation in bioreactors under different pasteurization conditions (57 °C/6 h, 60 °C/2 h, and 68 °C/2 h), simulating conditions adopted by many producers. Bacterial diversity, based on 16S ribosomal RNA obtained by high-throughput sequencing and classified in operational taxonomic units (OTUs), was greater than previously reported using culture-dependent methods. Alpha diversity estimators show a lower diversity of OTUs under a high-temperature pasteurization condition. Bacillales order shows a relatively higher OTU abundance under a high-pasteurization temperature, which also was related to high ammonia emission measurements. On the other hand, beta diversity analysis showed no significantly changes in the bacterial community structure under different conditions. Agaricus bisporus mycelium growth during a standard spawn run period was significantly slower in the compost pasteurized at high temperature. Since the bacterial community structure was not greatly affected by different pasteurization conditions but by-products left (e.g., ammonia) at the end of compost conditioning varied, further studies need to be conducted to determine the functional role of the microbial communities found during substrate preparation for Agaricus bisporus cultivation.

  4. A METHOD FOR PREPARING A SUBSTRATE BY APPLYING A SAMPLE TO BE ANALYSED

    DEFF Research Database (Denmark)

    2017-01-01

    The invention relates to a method for preparing a substrate (105a) comprising a sample reception area (110) and a sensing area (111). The method comprises the steps of: 1) applying a sample on the sample reception area; 2) rotating the substrate around a predetermined axis; 3) during rotation......, at least part of the liquid travels from the sample reception area to the sensing area due to capillary forces acting between the liquid and the substrate; and 4) removing the wave of particles and liquid formed at one end of the substrate. The sensing area is closer to the predetermined axis than...... the sample reception area. The sample comprises a liquid part and particles suspended therein....

  5. Morphology of CdSe films prepared by chemical bath deposition: The role of substrate

    International Nuclear Information System (INIS)

    Simurda, M.; Nemec, P.; Formanek, P.; Nemec, I.; Nemcova, Y.; Maly, P.

    2006-01-01

    We combine optical spectroscopy and transmission electron microscopy to study the growth and the structural morphology of CdSe films prepared by chemical bath deposition (CBD) on two considerably different substrates. The films grown on glass are compact and strongly adherent to the substrate. On the contrary, the films deposited on carbon-coated glass (with approx. 20 nm thick amorphous carbon layer) are only loosely adherent to the substrate. Using transmission electron microscopy we revealed that even though the films grown on both substrates are assembled from closely spaced nanocrystals with diameter of about 5 nm, the films morphology on the sub-micrometer scale is considerably different in the two cases. While the films deposited on glass are rather compact, the films prepared on carbon layer have high porosity and are formed by interconnected spheres which size is dependent on the duration of deposition (e.g. 155 nm for 6 h and 350 nm for 24 h). This shows that the choice of the substrate for CBD has a stronger influence on the sub-micrometer film morphology than on the properties of individual nanocrystals forming the film

  6. [Preparation of a kind of SERS-active substrates for spot fast analysis].

    Science.gov (United States)

    Ji, Nan; Li, Zhi-Shi; Zhao, Bing; Zou, Bo

    2013-02-01

    A kind of SERS-active substrates was prepared using chemical self-assembly method, aiming at spot fast analysis using portable Raman spectrometer. PDDA was first absorbed on the inner wall of vials, and then Ag colloids were assembled on the inner wall. UV-Vis spectra and Raman spectra of two kinds of blank vials were investigated and the transparent vials were thought to be better for SERS-vials. UV-Vis spectra were used to monitor the assembly process of Ag colloids. SERS activity of our substrates was characterized using p-ATP as probing molecules.

  7. Preparation and characterization of nanostructured ZrO2 coatings on dense and porous substrates

    International Nuclear Information System (INIS)

    Shi Jingyu; Verweij, Henk

    2008-01-01

    Nanostructured ZrO 2 coatings are prepared on both dense and porous substrates by wet-chemical deposition of non-agglomerated 5 nm precursor particle dispersions, followed by thermal processing. The precursor particle dispersions are made by modified emulsion precipitation and a purification treatment to remove reaction products and additives. The coatings are formed by depositing the precursor nanoparticle dispersion directly onto the substrate, followed by drying and heating at 600 deg. C. Scanning electron microscopy and cross-sectional transmission electron microscopy observations of the heat-treated coatings indicate that the ZrO 2 coating on dense Si wafer substrate has a homogeneous, dense particle packing structure with shallow meniscus-shaped depressions in the surface, and microcracks below the meniscus surface. On the other hand, coatings formed on a meso-porous γ-alumina membrane substrate are free of defects, but with a lower packing density. The mechanism of the substrate effect on the particle packing behavior and defect formation during coating deposition is discussed. It is expected that by using a thin porous substrate with reduced capillary force, a defect-free, homogenously dense-packed coating structure can be achieved

  8. Stability of encapsulated beef-like flavourings prepared from enzymatically hydrolysed mushroom proteins with other precursors under conventional and microwave heating.

    Science.gov (United States)

    Lotfy, Shereen N; Fadel, Hoda H M; El-Ghorab, Ahmed H; Shaheen, Mohamed S

    2015-11-15

    A comparative study was carried out between two beef-like flavourings prepared by conventional and microwave heating (CBF and MBF) of enzymatic hydrolysate of mushroom protein with other flavour precursors. GC-MS analysis of the isolated volatiles revealed that the thiol containing compounds were the predominate in both samples. However, MBF comprised higher concentration of these compounds (13.84 ± 0.06%) than CBF (10.74 ± 0.06%). The effect of microencapsulation with gum Arabic by using spray drying on the odour profile and volatile compounds of the two encapsulated samples (E-CBF and E-MBF) was investigated. The results revealed significant qualitative and quantitative variations in the volatiles of both samples. The highly volatile compounds decreased remarkably in concentration with encapsulation, while the pyrazines, thiazoles and disulphides showed opposite trend. The significant decrease in the thiol containing compounds in E-CBF and E-MBF were attributed to their oxidation to other compounds such as disulphide compounds which showed significant increase in the encapsulated samples. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Preparation of culinary-medicinal king oyster mushroom Pleurotus eryngii-fermented products with high ergothioneine content and their taste quality.

    Science.gov (United States)

    Chen, Shih-Yu; Ho, Kung-Jui; Liang, Chih-Hung; Tsai, Ching-Hsuan; Huang, Ling-Yi; Mau, Jeng-Leun

    2012-01-01

    Pleurotus eryngii (DC. : Fr.) Ouel. was used in solid-state fermentation to develop novel mushroom products with a high amount of ergothioneine. The correlation coefficients between ergothioneine content and biomass were 0.8878 and 0.9206 for fermented adlay and buckwheat, respectively. Using optimal conditions, Pleurotus-fermented adlay and buckwheat (PFA and PFB) with the ergothioneine contents of 795.5 and 786.1 mg/ kg, respectively, were prepared. However, mycelia contained the highest ergothioneine content of 1514.6 mg/kg. As a result of SSF by P. eryngii, PFA and PFB contained more taste components than adlay and buckwheat, as evidenced by higher contents of total sugars and polyols, total free amino acids and monosodium glutamate-like components, and total and flavor 5'-nucleotides. In addition, PFB and buckwheat showed comparable equivalent umami concentration (EUC) values, whereas PFA showed a higher EUC value than adlay. Overall, Pleurotus-fermented products with a high amount of ergothioneine will be a novel functional food.

  10. Optical Characterization of SERS Substrates Based on Porous Au Films Prepared by Pulsed Laser Deposition

    Directory of Open Access Journals (Sweden)

    V. V. Strelchuk

    2015-01-01

    Full Text Available The SERS (surface enhanced Raman spectroscopy substrates based on nanocomposite porous films with gold nanoparticles (Au NPs arrays were formed using the method of the pulsed laser deposition from the back low-energy flux of erosion torch particles on the glass substrate fixed at the target plain. The dependencies of porosity, and morphology of the surface of the film regions located near and far from the torch axis on the laser ablation regime, laser pulses energy density, their number, and argon pressure in the vacuum chamber, were ascertained. The Au NPs arrays with the controllable extinction spectra caused by the local surface plasmon resonance were prepared. The possibility of the formation of SERS substrates for the detection of the Rhodamine 6G molecules with the concentration 10−10 Mol/L with the enhancement factor 4·107 was shown.

  11. INFLUENCE OF SUBSTRATE TEMPERATURE ON STRUCTURAL, ELECTRICAL AND OPTICAL PROPERTIES OF ITO THIN FILMS PREPARED BY RF MAGNETRON SPUTTERING

    OpenAIRE

    BO HE; LEI ZHAO; JING XU; HUAIZHONG XING; SHAOLIN XUE; MENG JIANG

    2013-01-01

    In this paper, we investigated indium-tin-oxide (ITO) thin films on glass substrates deposited by RF magnetron sputtering using ceramic target to find the optimal condition for fabricating optoelectronic devices. The structural, electrical and optical properties of the ITO films prepared at various substrate temperatures were investigated. The results indicate the grain size increases with substrate temperature increases. As the substrate temperature grew up, the resistivity of ITO films grea...

  12. Template-based preparation of free-standing semiconducting polymeric nanorod arrays on conductive substrates.

    Science.gov (United States)

    Haberkorn, Niko; Weber, Stefan A L; Berger, Rüdiger; Theato, Patrick

    2010-06-01

    We describe the synthesis and characterization of a cross-linkable siloxane-derivatized tetraphenylbenzidine (DTMS-TPD), which was used for the fabrication of semiconducting highly ordered nanorod arrays on conductive indium tin oxide or Pt-coated substrates. The stepwise process allow fabricating of macroscopic areas of well-ordered free-standing nanorod arrays, which feature a high resistance against organic solvents, semiconducting properties and a good adhesion to the substrate. Thin films of the TPD derivate with good hole-conducting properties could be prepared by cross-linking and covalently attaching to hydroxylated substrates utilizing an initiator-free thermal curing at 160 degrees C. The nanorod arrays composed of cross-linked DTMS-TPD were fabricated by an anodic aluminum oxide (AAO) template approach. Furthermore, the nanorod arrays were investigated by a recently introduced method allowing to probe local conductivity on fragile structures. It revealed that more than 98% of the nanorods exhibit electrical conductance and consequently feature a good electrical contact to the substrate. The prepared nanorod arrays have the potential to find application in the fabrication of multilayered device architectures for building well-ordered bulk-heterojunction solar cells.

  13. Oyster mushroom cultivation with rice and wheat straw.

    Science.gov (United States)

    Zhang, Ruihong; Li, Xiujin; Fadel, J G

    2002-05-01

    Cultivation of the oyster mushroom, Pleurotus sajor-caju, on rice and wheat straw without nutrient supplementation was investigated. The effects of straw size reduction method and particle size, spawn inoculation level, and type of substrate (rice straw versus wheat straw) on mushroom yield, biological efficiency, bioconversion efficiency, and substrate degradation were determined. Two size reduction methods, grinding and chopping, were compared. The ground straw yielded higher mushroom growth rate and yield than the chopped straw. The growth cycles of mushrooms with the ground substrate were five days shorter than with the chopped straw for a similar particle size. However, it was found that when the straw was ground into particles that were too small, the mushroom yield decreased. With the three spawn levels tested (12%, 16% and 18%), the 12% level resulted in significantly lower mushroom yield than the other two levels. Comparing rice straw with wheat straw, rice straw yielded about 10% more mushrooms than wheat straw under the same cultivation conditions. The dry matter loss of the substrate after mushroom growth varied from 30.1% to 44.3%. The straw fiber remaining after fungal utilization was not as degradable as the original straw fiber, indicating that the fungal fermentation did not improve the feed value of the straw.

  14. Yield response of mushroom (Agaricus bisporus) on wheat straw ...

    African Journals Online (AJOL)

    SERVER

    2008-01-18

    Jan 18, 2008 ... 1Mugla University, Faculty of Technical Education, Kotekli, 48000, Mugla, Turkey. 2Mugla University, Mushroom ..... Hayes WA, Shandilya TR (1977). Casing soil and compost substrates used in the artifical culture of Agaricus bisporus, the cultivated mushroom. Indian J. Mycol. Plant Pathol. 7: 5-10. Lambert ...

  15. Indigenous knowledge and utilization of edible mushrooms in parts ...

    African Journals Online (AJOL)

    Heim and Coprinus disseminatus (Pers.: Fr.) S. F. Gray. Among the local people, names of edible mushrooms are based on the substrates on which they grow, their association with insects, and unrelated taxa are given collective names. Rural people believe mushrooms have medicinal values and can serve as blood tonic, ...

  16. Functional foods from mushroom

    Science.gov (United States)

    Mushrooms are defined as “a macro fungus with distinctive fruiting bodies that could be hypogeous or epigeous, large enough to be seen by naked eyes and to be picked by hands.” The Basidiomycetes and some species of Ascomycetes are categorized as mushrooms. Mushrooms constitute 22,000 known species ...

  17. Preparation of Mica and Silicon Substrates for DNA Origami Analysis and Experimentation

    Science.gov (United States)

    Pillers, Michelle A.; Shute, Rebecca; Farchone, Adam; Linder, Keenan P.; Doerfler, Rose; Gavin, Corey; Goss, Valerie; Lieberman, Marya

    2015-01-01

    The designed nature and controlled, one-pot synthesis of DNA origami provides exciting opportunities in many fields, particularly nanoelectronics. Many of these applications require interaction with and adhesion of DNA nanostructures to a substrate. Due to its atomically flat and easily cleaned nature, mica has been the substrate of choice for DNA origami experiments. However, the practical applications of mica are relatively limited compared to those of semiconductor substrates. For this reason, a straightforward, stable, and repeatable process for DNA origami adhesion on derivatized silicon oxide is presented here. To promote the adhesion of DNA nanostructures to silicon oxide surface, a self-assembled monolayer of 3-aminopropyltriethoxysilane (APTES) is deposited from an aqueous solution that is compatible with many photoresists. The substrate must be cleaned of all organic and metal contaminants using Radio Corporation of America (RCA) cleaning processes and the native oxide layer must be etched to ensure a flat, functionalizable surface. Cleanrooms are equipped with facilities for silicon cleaning, however many components of DNA origami buffers and solutions are often not allowed in them due to contamination concerns. This manuscript describes the set-up and protocol for in-lab, small-scale silicon cleaning for researchers who do not have access to a cleanroom or would like to incorporate processes that could cause contamination of a cleanroom CMOS clean bench. Additionally, variables for regulating coverage are discussed and how to recognize and avoid common sample preparation problems is described. PMID:26274888

  18. Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma spraying

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yi [Key Laboratory of Ministry of Education for Non-ferrous Materials Science and Engineering, Central South University, Changsha 410083 (China); Key Laboratory of Hunan Province for Metallurgy and Material Processing of Rare Metals, Central South University, Changsha 410083 (China); School of Materials Science and Engineering, Central South University, Changsha 410083 (China); Wang, Dezhi, E-mail: dzwang68@163.com [Key Laboratory of Ministry of Education for Non-ferrous Materials Science and Engineering, Central South University, Changsha 410083 (China); Key Laboratory of Hunan Province for Metallurgy and Material Processing of Rare Metals, Central South University, Changsha 410083 (China); School of Materials Science and Engineering, Central South University, Changsha 410083 (China); Yan, Jianhui [Advanced Materials Synthesis and Application Technology Laboratory, Hunan University of Science and Technology, Xiangtan 411201 (China); Sun, Aokui [Key Laboratory of Ministry of Education for Non-ferrous Materials Science and Engineering, Central South University, Changsha 410083 (China); Key Laboratory of Hunan Province for Metallurgy and Material Processing of Rare Metals, Central South University, Changsha 410083 (China); School of Materials Science and Engineering, Central South University, Changsha 410083 (China)

    2013-11-01

    MoSi{sub 2} oxidation protective coatings on molybdenum substrate were prepared by air plasma spraying technique (APS). Microstructure, phase composition, porosity, microhardness and bonding strength of the coatings were investigated and determined. Oxidation behavior of the coating at high temperature was also examined. Results show that composition of the coatings is constituted with MoSi{sub 2} and Mo{sub 5}Si{sub 3}, the surface morphology is described as flattened lamellar features, insufficiently flattened protuberance with some degree of surface roughness, a certain quantity of spherical particles, microcracks and pores. Testing results reveal that microhardness and bonding strength of the coatings increase, and porosity decreases with increasing power or decreasing Ar gas flow rate. Moreover, with decreasing the porosity, the microhardness of the coatings increases. The bonding strength of the coatings also increases with increasing spray distance. The MoSi{sub 2} coated Mo substrate exhibited a good oxidation resistance at 1200 °C.

  19. Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma spraying

    International Nuclear Information System (INIS)

    Wang, Yi; Wang, Dezhi; Yan, Jianhui; Sun, Aokui

    2013-01-01

    MoSi 2 oxidation protective coatings on molybdenum substrate were prepared by air plasma spraying technique (APS). Microstructure, phase composition, porosity, microhardness and bonding strength of the coatings were investigated and determined. Oxidation behavior of the coating at high temperature was also examined. Results show that composition of the coatings is constituted with MoSi 2 and Mo 5 Si 3 , the surface morphology is described as flattened lamellar features, insufficiently flattened protuberance with some degree of surface roughness, a certain quantity of spherical particles, microcracks and pores. Testing results reveal that microhardness and bonding strength of the coatings increase, and porosity decreases with increasing power or decreasing Ar gas flow rate. Moreover, with decreasing the porosity, the microhardness of the coatings increases. The bonding strength of the coatings also increases with increasing spray distance. The MoSi 2 coated Mo substrate exhibited a good oxidation resistance at 1200 °C.

  20. Preparation and characterization of CuO nanostructures on copper substrate as selective solar absorbers

    International Nuclear Information System (INIS)

    Karthick Kumar, S.; Murugesan, S.; Suresh, S.

    2014-01-01

    Selective solar absorber coatings of copper oxide (CuO) on copper substrates are prepared by room temperature oxidation of copper at different alkaline conditions. The surface morphology and structural analyses of the CuO coatings are carried out by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectroscopy (EDS) and Raman spectroscopy techniques. XRD and Raman studies indicated the single phase nature and high crystallinity of the prepared CuO nanostructures. Different CuO nanostructures, viz., nanoneedles, nanofibers and nanoparticles are formed at different alkaline conditions. The influence of reaction time on morphology of the CuO nanostructures is also studied. The thermal emittance values of these nanostructured CuO samples are found to be in the range of 6–7% and their solar absorptances are ranged between 84 and 90%. The observed high solar selectivity values (>12.7) suggest that these coatings can be used as selective absorbers in solar thermal gadgets. - Highlights: • Nanostructured CuO thin films on Cu substrate have been prepared by a facile method. • Morphology of the CuO nanostructures varies with reaction pH. • The thin films show high absorptance in the visible region and low thermal emittance. • Multiple absorption in the porous structure leads to high solar absorptance. • Nanostructures posses solar selectivity values >12

  1. Evaluating the production of Ganoderma mushroom on corn cobs

    African Journals Online (AJOL)

    SAM

    2014-05-28

    May 28, 2014 ... Full Length Research Paper. Evaluating the production ... Key words: Ganoderma, corn cobs, substrate, mushrooms, sawdust, basidiocarp. INTRODUCTION .... those which have high lignin and low cellulose. This is because ...

  2. The preparation and characterization of Bi-2212 film on Ag substrate by dip-coating method

    International Nuclear Information System (INIS)

    Song Yang; Zhao Liang; Li Pei; Qu Timing; Huang Yong; Han Zhenghe

    2006-01-01

    In this paper we report on the processing parameters and resulting critical current densities of Bi 2 Sr 2 Ca 1 Cu 2 O x thick films on Ag substrate. Bi-2212 tapes and wires are prepared by dip-coating method. It is found that parameters during partial melting (maximum process temperature T max and solidification temperature T s ) have strong influences on the transition temperature T c . The 0.5 mm diameter dip-coated wire can carry 4000 A/cm 2 critical current in 77 K, self field. Post-annealing on different temperatures and atmospheres are studied as well to obtain varied T c samples

  3. A simple method to prepare self-assembled organic-organic heterobilayers on metal substrates

    Directory of Open Access Journals (Sweden)

    L. D. Sun

    2011-06-01

    Full Text Available We demonstrate a self-assembly based simple method to prepare organic-organic heterobilayers on a metal substrate. By either sequential- or co-deposition of para-sexiphenyl (p-6P and pentacene molecules onto the Cu(110 surface in ultrahigh vacuum, p-6P/pentacene/Cu(110 heterobilayer is synthesized at room temperature. The layer sequence of the heterostructure is independent of the growth scenario indicating the p-6P/pentacene/Cu(110 is a self-assembled structure with lowest energy. Besides, the bilayer shows a very high orientational ordering and is thermally stable up to 430K.

  4. Effect of substrate choice and tissue type on tissue preparation for spectral histopathology by Raman microspectroscopy.

    Science.gov (United States)

    Fullwood, Leanne M; Griffiths, Dave; Ashton, Katherine; Dawson, Timothy; Lea, Robert W; Davis, Charles; Bonnier, Franck; Byrne, Hugh J; Baker, Matthew J

    2014-01-21

    Raman spectroscopy is a non-destructive, non-invasive, rapid and economical technique which has the potential to be an excellent method for the diagnosis of cancer and understanding disease progression through retrospective studies of archived tissue samples. Historically, biobanks are generally comprised of formalin fixed paraffin preserved tissue and as a result these specimens are often used in spectroscopic research. Tissue in this state has to be dewaxed prior to Raman analysis to reduce paraffin contributions in the spectra. However, although the procedures are derived from histopathological clinical practice, the efficacy of the dewaxing procedures that are currently employed is questionable. Ineffective removal of paraffin results in corruption of the spectra and previous experiments have shown that the efficacy can depend on the dewaxing medium and processing time. The aim of this study was to investigate the influence of commonly used spectroscopic substrates (CaF2, Spectrosil quartz and low-E slides) and the influence of different histological tissue types (normal, cancerous and metastatic) on tissue preparation and to assess their use for spectral histopathology. Results show that CaF2 followed by Spectrosil contribute the least to the spectral background. However, both substrates retain paraffin after dewaxing. Low-E substrates, which exhibit the most intense spectral background, do not retain wax and resulting spectra are not affected by paraffin peaks. We also show a disparity in paraffin retention depending upon the histological identity of the tissue with abnormal tissue retaining more paraffin than normal.

  5. Radioisotopes of the U, Th, Pu, Am in the mushrooms

    International Nuclear Information System (INIS)

    Galanda, D.; Matel, L.

    2001-01-01

    The present work is devoted the estimation of the data about radioactive contamination in different species of mushrooms with the aim to analyzing the influence of soil properties. The radioactive plutonium, uranium, thorium and americium was assayed in the dried mushrooms collected in areas of East and West Slovakia in 1998 -2000, and examined the effectiveness of this mushroom as a possible indicator of radioactive contamination of environment due to nuclear contamination of biosphere. Were determined the mushrooms of canes: Suillus, Leccinum, Baletus, Armillariella, Xerocomus and Craterellus. The mushrooms were dried and prepared by liquid extraction with Aliquat 336. The samples were measured by α-barrier spectrometry. The results of specific activity of plutonium, thorium, uranium and americium in the mushrooms and the layers of forest litter were summarized. (authors)

  6. The first report on mushroom green mould disease in Croatia.

    Science.gov (United States)

    Hatvani, Lóránt; Sabolić, Petra; Kocsubé, Sándor; Kredics, László; Czifra, Dorina; Vágvölgyi, Csaba; Kaliterna, Joško; Ivić, Dario; Đermić, Edyta; Kosalec, Ivan

    2012-12-01

    Green mould disease, caused by Trichoderma species, is a severe problem for mushroom growers worldwide, including Croatia. Trichoderma strains were isolated from green mould-affected Agaricus bisporus (button or common mushroom) compost and Pleurotus ostreatus (oyster mushroom) substrate samples collected from Croatian mushroom farms. The causal agents of green mould disease in the oyster mushroom were T. pleurotum and T. pleuroticola, similar to other countries. At the same time, the pathogen of A. bisporus was exclusively the species T. harzianum, which is different from earlier findings and indicates that the range of mushroom pathogens is widening. The temperature profiles of the isolates and their hosts overlapped, thus no range was found that would allow optimal growth of the mushrooms without mould contamination. Ferulic acid and certain phenolic compounds, such as thymol showed remarkable fungistatic effect on the Trichoderma isolates, but inhibited the host mushrooms as well. However, commercial fungicides prochloraz and carbendazim were effective agents for pest management. This is the first report on green mould disease of cultivated mushrooms in Croatia.

  7. Direct nanofabrication and transmission electron microscopy on a suite of easy-to-prepare ultrathin film substrates

    International Nuclear Information System (INIS)

    Allred, Daniel B.; Zin, Melvin T.; Ma, Hong; Sarikaya, Mehmet; Baneyx, Francois; Jen, Alex K.-Y.; Schwartz, Daniel T.

    2007-01-01

    A high-yield, easy to master method for preparing electron transparent metal, oxide, and carbon ultrathin film substrates suitable for direct nano/micro-fabrication and transmission electron microscopy (TEM) is presented. To demonstrate the versatility of these substrates for fabrication processes, we use e-beam lithography, self-assembled colloidal and protein templates, and microcontact printing to create patterned masks for subsequent electrodeposition of two dimensional and three dimensional structures. The electrodeposited structures range in scale from a few nanometers to a few micrometers in characteristic dimensions. Because fabrication occurs directly on ultrathin films, TEM analysis of the resulting materials and buried interfaces is straightforward without any destructive sample preparation. We show that all the normal TEM analytical methods (imaging, diffraction, electron and X-ray spectroscopies) are compatible with the fabricated structures and the thin film substrates. These electron transparent substrates have largely rendered the need for TEM sample preparation on fabricated structures obsolete in our lab

  8. Medicinal Mushrooms

    NARCIS (Netherlands)

    Lindequist, U.; Won Kim, H.; Tiralongo, E.; Griensven, van L.J.L.D.

    2014-01-01

    Since beginning of mankind nature is the most important source of medicines. Bioactive compounds produced by living organisms can be used directly as drugs or as lead compounds for drug development. Besides, the natural material can be used as crude drug for preparation of powder or extracts. Plants

  9. Preparation and Characterization of FC Films Coated on PET Substrates by RF Magnetron Sputtering

    Directory of Open Access Journals (Sweden)

    Huang Mei-lin

    2018-01-01

    Full Text Available Fluorocarbon (FC films were prepared on polyethylene terephthalate (PET plates and PET fabrics respectively by a radiofrequency (RF magnetron sputtering technique using polytetrafluoroethylene (PTFE as a target. Scanning electron microscope and X-ray photoelectron spectroscopy were used to investigate the morphology, structure and composition of the obtained FC films. The hydrophobicity and uvioresistant properties of the FC film coated fabric were studied. The results show that the FC films were successfully deposited on the PET substrates by a RF magnetron sputtering. The deposited films are made up of four components -CF3, -CF2-, CF- and -C-. The proportions of the four components and surface morphologies of the deposited films vary with the sputtering conditions. Compared with the original fabric samples, the hydrophobicity of the FC film coated fabrics is quite good and improved significantly.

  10. Preparation of Superhydrophobic Film on Ti Substrate and Its Anticorrosion Property

    Directory of Open Access Journals (Sweden)

    Min Zhu

    2017-06-01

    Full Text Available Superhydrophobic films were fabricated on a titanium substrate with or without anodizing by using a self-assembling method. Firstly, the pretreatments of mechanical polishing/anodizing or mechanical polishing only were conducted, respectively. Subsequently, the preparation of polydopamine film layer, deposition of nano-silver particles, and post modification of 1H,1H,2H,2H-perfluorodecanethiol were performed on the surface of the pretreated substrate. The surface morphologies, compositions, wettability, and corrosion resistance of the films were investigated with scanning electron microscopy (SEM, energy-dispersive spectrometry (EDS, water contact angle measurements, and electrochemical tests, respectively. Meanwhile, the effect of the deposition time in the silver nitrate solution on the hydrophobicity of the specimen surface was investigated. The result showed that with the increase of deposition time, the hydrophobic property enhanced gradually. The surface deposited for 7 h exhibited an optimum hydrophobic effect, which was characterized with a large water contact angle (WCA of 154°, and the surface was rather rough and covered by a relatively uniform layer of micro-nano silver particles. The excellent hydrophobicity was attributed to a rough stratified microstructure along with the low surface energy. The electrochemical measurements showed that the existence of the superhydrophobic film can effectively enhance the corrosion resistance of Ti samples.

  11. Preparation of Superhydrophobic Film on Ti Substrate and Its Anticorrosion Property.

    Science.gov (United States)

    Zhu, Min; Tang, Wenchuan; Huang, Luyao; Zhang, Dawei; Du, Cuiwei; Yu, Gaohong; Chen, Ming; Chowwanonthapunya, Thee

    2017-06-08

    Superhydrophobic films were fabricated on a titanium substrate with or without anodizing by using a self-assembling method. Firstly, the pretreatments of mechanical polishing/anodizing or mechanical polishing only were conducted, respectively. Subsequently, the preparation of polydopamine film layer, deposition of nano-silver particles, and post modification of 1H,1H,2H,2H-perfluorodecanethiol were performed on the surface of the pretreated substrate. The surface morphologies, compositions, wettability, and corrosion resistance of the films were investigated with scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), water contact angle measurements, and electrochemical tests, respectively. Meanwhile, the effect of the deposition time in the silver nitrate solution on the hydrophobicity of the specimen surface was investigated. The result showed that with the increase of deposition time, the hydrophobic property enhanced gradually. The surface deposited for 7 h exhibited an optimum hydrophobic effect, which was characterized with a large water contact angle (WCA) of 154°, and the surface was rather rough and covered by a relatively uniform layer of micro-nano silver particles. The excellent hydrophobicity was attributed to a rough stratified microstructure along with the low surface energy. The electrochemical measurements showed that the existence of the superhydrophobic film can effectively enhance the corrosion resistance of Ti samples.

  12. Preparation of Superhydrophobic Film on Ti Substrate and Its Anticorrosion Property

    Science.gov (United States)

    Zhu, Min; Tang, Wenchuan; Huang, Luyao; Zhang, Dawei; Du, Cuiwei; Yu, Gaohong; Chen, Ming; Chowwanonthapunya, Thee

    2017-01-01

    Superhydrophobic films were fabricated on a titanium substrate with or without anodizing by using a self-assembling method. Firstly, the pretreatments of mechanical polishing/anodizing or mechanical polishing only were conducted, respectively. Subsequently, the preparation of polydopamine film layer, deposition of nano-silver particles, and post modification of 1H,1H,2H,2H-perfluorodecanethiol were performed on the surface of the pretreated substrate. The surface morphologies, compositions, wettability, and corrosion resistance of the films were investigated with scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), water contact angle measurements, and electrochemical tests, respectively. Meanwhile, the effect of the deposition time in the silver nitrate solution on the hydrophobicity of the specimen surface was investigated. The result showed that with the increase of deposition time, the hydrophobic property enhanced gradually. The surface deposited for 7 h exhibited an optimum hydrophobic effect, which was characterized with a large water contact angle (WCA) of 154°, and the surface was rather rough and covered by a relatively uniform layer of micro-nano silver particles. The excellent hydrophobicity was attributed to a rough stratified microstructure along with the low surface energy. The electrochemical measurements showed that the existence of the superhydrophobic film can effectively enhance the corrosion resistance of Ti samples. PMID:28772987

  13. Facile preparation of salt-tolerant anion-exchange membrane adsorber using hydrophobic membrane as substrate.

    Science.gov (United States)

    Fan, Jinxin; Luo, Jianquan; Chen, Xiangrong; Wan, Yinhua

    2017-03-24

    In this study, a polyvinylidene fluoride (PVDF) hydrophobic membrane with high mechanical property was used as substrate to prepare salt-tolerant anion-exchange (STAE) membrane adsorber. Effective hydrophilization and functionalization of PVDF membrane was realized via polydopamine (PDA) deposition, thus overcoming the drawbacks of hydrophobic substrates including poor water permeability, inert property as well as severe non-specific adsorption. The following polyallylamine (PAH) coupling was carried out at pH 10.0, where unprotonated amine groups on PAH chains were more prone to couple with PDA. This membrane adsorber could remain 75% of protein binding capacity when NaCl concentration increased from 0 to 150mM, while its protein binding capacity was independent of flow rate from 10 to 100 membrane volume (MV)/min due to its high mechanical strength (tensile strength: 43.58±2.30MPa). With 200mM NaCl addition at pH 7.5, high purity (above 99%) and high recovery (almost 100%) of Immunoglobulin G (IgG) were obtained when using the STAE membrane adsorber to separate IgG/human serum albumin (HSA) mixture, being similar to that without NaCl at pH 6.0 (both under the flow rate of 10-100MV/min). Finally, the reliable reusability was confirmed by five reuse cycles of protein binding and elution operations. In comparison with commercial membrane adsorber, the new membrane adsorber exhibited a better mechanical property, higher IgG polishing efficiency and reusability, while the protein binding capacity was lower due to less NH 2 density on the membrane. The outcome of this work not only offers a facile and effective approach to prepare membrane adsorbers based on hydrophobic membranes, but also demonstrates great potential of this new designed STAE membrane adsorbers for efficient monoclonal antibody (mAb) polishing. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Preparing magnetic yttrium iron garnet nanodot arrays by ultrathin anodic alumina template on silicon substrate

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Hui; Han, Mangui, E-mail: han-mangui@yahoo.com; Deng, Longjiang [National Engineering Research Center of Electromagnetic Radiation Control Materials, University of Electronic Science and Technology of China, Chengdu 610054 (China); Zheng, Liang; Zheng, Peng; Qin, Huibin [Institute of Electron Device and Application, Hangzhou Dianzi University, Hangzhou 310008 (China); Wu, Qiong [Magnetism Key Laboratory of Zhejiang Province, China Jiliang University, Hangzhou 310018 (China)

    2015-08-10

    Ultrahigh density periodically ordered magnetic yttrium iron garnet (Y{sub 3}Fe{sub 5}O{sub 12}, YIG) nanodot arrays have been prepared by pulsed laser deposition through an ultrathin alumina mask (UTAM). UTAM having periodically ordered circularly shaped holes with 350 nm in diameter, 450 nm in inter-pore distance, and 700 nm in height has been prepared on silicon substrate. Furthermore, the microstructure and magnetic properties of YIG nanodot arrays have been characterized. Nanodot arrays with a sharp distribution in diameter centered at 340 nm with standard deviation of 10 nm have been fabricated. Moreover, typical hysteresis loops and ferromagnetic resonance spectra in in-plane and out-of-plane revealed that this unique structure greatly influences the magnetics properties of YIG. First, coercivity of YIG nanodot arrays in in-plane was increased about from 15 Oe of YIG films to 500 Oe. Then, the degree of uniformity about nanodot height decided that two or more resonance peaks in out-of-plane were detected in the spectra. The peak-to-peak linewidth values were about 94 Oe and 40 Oe in the parallel and perpendicular directions, respectively, which indicated that the values were larger by the two-magnon scattering. Consequently, this pattering method creates opportunities for studying physics in oxide nanomagnets and may be applied in spin-wave devices.

  15. Carbon nanotubes length optimization for preparation of improved transparent and conducting thin film substrates

    Directory of Open Access Journals (Sweden)

    Mansoor Farbod

    2017-03-01

    Full Text Available Transparent and conductive thin films of multiwalled carbon nanotubes (MWCNTs with different lengths were prepared on glass substrates by the spin coating method. In order to reduce the MWCNTs length, they were functionalized. The initial length of MWCNTs (10–15 μm was reduced to 1200, 205 and 168 nm after 30, 60 and 120 min refluxing time, respectively. After post annealing at 285 °C for 24 h, the electrical and optical properties were greatly improved for functionalized MWCNT thin films. They strongly depend on the length of CNTs. The optical transmittance of the film prepared using 30 min reflux CNTs was 2.6% and 6.6% higher than that of the 60 min and 120 min refluxed samples respectively. The sheet resistance of this film showed reductions of 45% and 80% as well. The film also exhibited the least roughness. The percolative figure of merit, which is proportional to the transparency and disproportional to the sheet resistance, was found to be higher for the sample with 30 min refluxed MWCNTs.

  16. The Economic Empowerment of Women in Uganda Through Mushroom Production

    Directory of Open Access Journals (Sweden)

    Ibarahim Mayanja

    2017-11-01

    Full Text Available This study focuses on empowering women both in peri-urban and rural areas through mushroom production. It was conducted in Kampala Metropolitan area-Uganda, during October 2016. It focused on estimating profits, conducting benefit-cost analysis/ratio (BCR and return on investment (ROI, finding reasons as to why women involved in the mushroom production and identifying the constraints of mushroom farming from the perspective of women as well as the possible solutions to the constraints. 29 women were interviewed face to face through the use of the questionnaires. The study revealed an average net profit of 3,464.28 US dollars, BCR of 3.84 and ROI of 2.84 per farm in a period of three months. Our study revealed that mushroom production is a profitable enterprise for women. The major reason for women to involve in mushroom was to earn income. However, a range of other reasons was given such as fast maturity of mushrooms, availability of market, healthy benefits of mushrooms, etc. were the most important reasons. The problems faced by women farmers were ranked from the most pressing problem to the least pressing problem in this order; Low market prices per kilogram of mushroom, scarcity of cotton during some seasons, poor quality mushroom spawn supplied to farmers by breeders, inadequate extension, and advisory services were the most observed problems among others. The suggested solutions were organizing farmers into groups or cooperatives in order to negotiate for better markets locally and abroad together with the help of government, researchers to carry out more research on the suitability of other substrates like bagasse other than relying on only cotton, ensuring that mushroom spawn breeders conform to the set standards of quality spawn production and re-equipping local extension workers with knowledge regarding mushroom production among others.

  17. Evaluation of preparation methods for suspended nano-objects on substrates for dimensional measurements by atomic force microscopy

    Directory of Open Access Journals (Sweden)

    Petra Fiala

    2017-08-01

    Full Text Available Dimensional measurements on nano-objects by atomic force microscopy (AFM require samples of safely fixed and well individualized particles with a suitable surface-specific particle number on flat and clean substrates. Several known and proven particle preparation methods, i.e., membrane filtration, drying, rinsing, dip coating as well as electrostatic and thermal precipitation, were performed by means of scanning electron microscopy to examine their suitability for preparing samples for dimensional AFM measurements. Different suspensions of nano-objects (with varying material, size and shape stabilized in aqueous solutions were prepared therefore on different flat substrates. The drop-drying method was found to be the most suitable one for the analysed suspensions, because it does not require expensive dedicated equipment and led to a uniform local distribution of individualized nano-objects. Traceable AFM measurements based on Si and SiO2 coated substrates confirmed the suitability of this technique.

  18. Evaluation of preparation methods for suspended nano-objects on substrates for dimensional measurements by atomic force microscopy.

    Science.gov (United States)

    Fiala, Petra; Göhler, Daniel; Wessely, Benno; Stintz, Michael; Lazzerini, Giovanni Mattia; Yacoot, Andrew

    2017-01-01

    Dimensional measurements on nano-objects by atomic force microscopy (AFM) require samples of safely fixed and well individualized particles with a suitable surface-specific particle number on flat and clean substrates. Several known and proven particle preparation methods, i.e., membrane filtration, drying, rinsing, dip coating as well as electrostatic and thermal precipitation, were performed by means of scanning electron microscopy to examine their suitability for preparing samples for dimensional AFM measurements. Different suspensions of nano-objects (with varying material, size and shape) stabilized in aqueous solutions were prepared therefore on different flat substrates. The drop-drying method was found to be the most suitable one for the analysed suspensions, because it does not require expensive dedicated equipment and led to a uniform local distribution of individualized nano-objects. Traceable AFM measurements based on Si and SiO 2 coated substrates confirmed the suitability of this technique.

  19. Radiation damage to mushrooms

    International Nuclear Information System (INIS)

    Sattler, P.W.

    1986-01-01

    This document contains newspaper cuttings and correspondence with various ministries in Hessen on the subject of radiation damage to mushrooms from the Odenwald area. The reader is given, amongst other things, detailed information on radiation damage to different types of mushroom in 1986. (MG) [de

  20. Studies Concerning the Accumulation of Minerals and Heavy Metals in Fruiting Bodies of Wild Mushrooms

    International Nuclear Information System (INIS)

    Stihi, Claudia; Radulescu, Cristiana; Gheboianu, Anca; Bancuta, Iulian; Popescu, Ion V.; Busuioc, Gabriela

    2011-01-01

    The minerals and heavy metals play an important role in the metabolic processes, during the growth and development of mushrooms, when they are available in appreciable concentration. In this work the concentrations of Cr, Mn, Fe, Ni, Cu, Zn, Se, Cd and Pb were analyzed using the Flame Atomic Absorption spectrometry (FAAS) together with Energy Dispersive X-ray Fluorescence spectrometry (EDXRF) in 3 wild mushrooms species and their growing substrate, collected from various forestry fields in Dambovita County, Romania. The analyzed mushrooms were: Amanita phalloides, Amanita rubescens and Armillariella mellea. The accumulation coefficients were calculated to assess the mobility of minerals and heavy metals from substrate to mushrooms [1].

  1. Hepatoprotective Effects of Mushrooms

    Directory of Open Access Journals (Sweden)

    Rosane Marina Peralta

    2013-07-01

    Full Text Available The particular characteristics of growth and development of mushrooms in nature result in the accumulation of a variety of secondary metabolites such as phenolic compounds, terpenes and steroids and essential cell wall components such as polysaccharides, b-glucans and proteins, several of them with biological activities. The present article outlines and discusses the available information about the protective effects of mushroom extracts against liver damage induced by exogenous compounds. Among mushrooms, Ganoderma lucidum is indubitably the most widely studied species. In this review, however, emphasis was given to studies using other mushrooms, especially those presenting efforts of attributing hepatoprotective activities to specific chemical components usually present in the mushroom extracts.

  2. Biotechnology for in vitro growing of edible and medicinal mushrooms on wood wastes

    Directory of Open Access Journals (Sweden)

    Marian Petre

    2009-11-01

    Full Text Available The aim of this work was focused on finding out the best way to convert the wood wastes into useful food supplements, such as mushroom fruit bodies, by using them as growing sources for the edible and medicinal mushrooms. According to this purpose, three fungal species from Basidiomycetes, namely Ganoderma lucidum (Curt.:Fr. P. Karst, Lentinus edodes (Berkeley Pegler and Pleurotus ostreatus (Jacquin ex Fries Kummer were tested to determine their biological potential to grow on substrates made of wood wastes (sawdusts as well as shavings which could be used in this way as main ingredients for preparation of natural culture composts.The experiments were achieved by in vitro growing of all these fungal species in special rooms, where the main culture parameters were kept at optimal levels in order to get the highest production of mushroom fruit bodies. The effects of culture compost composition (carbon, nitrogen and mineral sources as well as other physical and chemical factors (such as: temperature, inoculum amount, pH level and incubation time, etc. on mycelial net formation and especially on fruit body induction, were investigated. From all these fungal species tested in our experiments, P. ostreatus was registered as the fastest mushroom culture, then L. edodes and finally, G. lucidum asthe longest mushroom culture. During the experiments, different logs of the same species were used as control samples for each culture compost variants. Applying such biotechnology, the environmental problems generated by the plant wastes accumulation in wood industry could be solved only by using biological means for theirvalorising, simultaneously with food supplements producing having high nutritive values as well as healing effects by increasing the consumers` health.

  3. Biotechnology for in vitro growing of edible and medicinal mushrooms on wood wastes

    Directory of Open Access Journals (Sweden)

    Marian Petre

    2009-12-01

    Full Text Available The aim of this work was focused on finding out the best way to convert the wood wastes into useful food supplements, such as mushroom fruit bodies, by using them as growing sources for the edible and medicinal mushrooms. According to this purpose, three fungal species from Basidiomycetes, namely Ganoderma lucidum (Curt.:Fr. P. Karst, Lentinus edodes (Berkeley Pegler and Pleurotus ostreatus (Jacquin ex Fries Kummer were tested to determine their biological potential to grow on substrates made of wood wastes (sawdusts as well as shavings which could be used in this way as main ingredients for preparation of natural culture composts. The experiments were achieved by in vitro growing of all these fungal species in special rooms, where the main culture parameters were kept at optimal levels in order to get the highest production of mushroom fruit bodies. The effects of culture compost composition (carbon, nitrogen and mineral sources as well as other physical and chemical factors (such as: temperature, inoculum amount, pH level and incubation time, etc. on mycelial net formation and especially on fruit body induction, were investigated. From all these fungal species tested in our experiments, P. ostreatus was registered as the fastest mushroom culture, then L. edodes and finally, G. lucidum as the longest mushroom culture. During the experiments, different logs of the same species were used as control samples for each culture compost variants. Applying such biotechnology, the environmental problems generated by the plant wastes accumulation in wood industry could be solved only by using biological means for their valorising, simultaneously with food supplements producing having high nutritive values as well as healing effects by increasing the consumers` health.

  4. Molecular and Antibacterial Profile of Edible Oyster Mushrooms ...

    African Journals Online (AJOL)

    2012r

    2014-09-24

    Sep 24, 2014 ... Phenol/Chloroform DNA extraction protocol and the DNA was ... DNA from oyster mushroom fermentation broth, mycelia or fruiting bodies. .... Sample preparation: The different strains of Pleurotus were obtained in test- tubes.

  5. Implications of polluted soil biostimulation and bioaugmentation with spent mushroom substrate (Agaricus bisporus) on the microbial community and polycyclic aromatic hydrocarbons biodegradation.

    Science.gov (United States)

    García-Delgado, Carlos; D'Annibale, Alessandro; Pesciaroli, Lorena; Yunta, Felipe; Crognale, Silvia; Petruccioli, Maurizio; Eymar, Enrique

    2015-03-01

    Different applications of spent Agaricus bisporus substrate (SAS), a widespread agro-industrial waste, were investigated with respect to the remediation of a historically polluted soil with Polycyclic Aromatic Hydrocarbons (PAH). In one treatment, the waste was sterilized (SSAS) prior to its application in order to assess its ability to biostimulate, as an organic amendment, the resident soil microbiota and ensuing contaminant degradation. For the other treatments, two bioaugmentation approaches were investigated; the first involved the use of the waste itself and thus implied the application of A. bisporus and the inherent microbiota of the waste. In the second treatment, SAS was sterilized and inoculated again with the fungus to assess its ability to act as a fungal carrier. All these treatments were compared with natural attenuation in terms of their impact on soil heterotrophic and PAH-degrading bacteria, fungal growth, biodiversity of soil microbiota and ability to affect PAH bioavailability and ensuing degradation and detoxification. Results clearly showed that historically PAH contaminated soil was not amenable to natural attenuation. Conversely, the addition of sterilized spent A. bisporus substrate to the soil stimulated resident soil bacteria with ensuing high removals of 3-ring PAH. Both augmentation treatments were more effective in removing highly condensed PAH, some of which known to possess a significant carcinogenic activity. Regardless of the mode of application, the present results strongly support the adequacy of SAS for environmental remediation purposes and open the way to an attractive recycling option of this waste. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Lead accumulation in the straw mushroom, Volvariella volvacea, from lead contaminated rice straw and stubble.

    Science.gov (United States)

    Kumhomkul, Thapakorn; Panich-pat, Thanawan

    2013-08-01

    Straw mushrooms were grown on lead contaminated rice straw and stubble. Study materials were dried, acid digested, and analyzed for lead using flame atomic absorption spectrophotometry. The results showed the highest lead concentration in substrate was 445.350 mg kg⁻¹ in Treatment 3 (T3) and the lowest was BD (below detection) in Treatment 1 (T1). The maximum lead content in straw mushrooms was 5.072 mg kg⁻¹ dw in pileus of T3 and the minimum lead content in straw mushrooms was BD in egg and mature (stalk and pileus) stage of T1. The lead concentration in straw mushrooms was affected by the age of the mycelium and the morphology of mushrooms. Mushrooms' lead uptake produced the highest accumulation in the cell wall. Some lead concentrations in straw mushrooms exceeded the EU standard (>3 mg kg⁻¹ dw).

  7. FUNGI: A REVIEW ON MUSHROOMS

    OpenAIRE

    Abulude, F. Olawale; Ndamitso, M. Muhammed

    2017-01-01

    This paper reviews a fungus – mushrooms. In this paper, identification, cultivation, uses, side effects, nutritional and medicinal values, storage, marketing and other uses of mushrooms were discussed. From the review too it was observed that its usefulness surpasses the side effects. These side effects could be eliminated if proper ‘processing’ could be employed. Due to advances in both basic knowledge and practical technology relevant to mushroom farming, mushroom products and mushroom bior...

  8. Evaluation of preparation methods for suspended nano-objects on substrates for dimensional measurements by atomic force microscopy

    OpenAIRE

    Fiala, Petra; G?hler, Daniel; Wessely, Benno; Stintz, Michael; Lazzerini, Giovanni Mattia; Yacoot, Andrew

    2017-01-01

    Dimensional measurements on nano-objects by atomic force microscopy (AFM) require samples of safely fixed and well individualized particles with a suitable surface-specific particle number on flat and clean substrates. Several known and proven particle preparation methods, i.e., membrane filtration, drying, rinsing, dip coating as well as electrostatic and thermal precipitation, were performed by means of scanning electron microscopy to examine their suitability for preparing samples for dime...

  9. Porous chromatographic materials as substrates for preparing synthetic nuclear explosion debris particles

    International Nuclear Information System (INIS)

    Harvey, S.D.; Carman, A.J.; Martin Liezers; Antolick, K.C.; Garcia, B.J.; Eiden, G.C.; Sweet, L.E.

    2013-01-01

    Several porous chromatographic materials were investigated as synthetic substrates for preparing surrogate nuclear explosion debris particles. Eighteen metals, including some of forensic interest, were loaded onto materials by immersing them in metal solutions (556 mg/L of each metal) to fill the pores, applying gentle heat (110 deg C) to drive off water, and then treating them at high temperatures (up to 800 deg C) in air to form less soluble metal species. High-boiling-point metals were uniformly loaded on spherical controlled-pore glass to emulate early fallout, whereas low-boiling-point metals were loaded on core-shell silica to represent coated particles formed later in the nuclear fallout-formation process. Analytical studies characterized material balance and the formation of recalcitrant species. Metal loading was 1.5-3 times higher than expected from the pore volume alone, a result attributed to surface coating. Most metals were passively loaded; that is, solutions filled the pores without active metal discrimination. However, niobium and tin concentrations were lower in solutions after pore filling, and were found in elevated concentrations in the final products, indicating selective loading. High-temperature treatments caused reduced solubility of several metals, and the loss of some volatile species (rhenium and tellurium). Sample preparation reproducibility was high (the inter- and intra-batch relative standard deviations were 7.8 and 0.84 %, respectively) indicating suitability for use as a working standard for analytical methods development. We anticipate future standardized radionuclide-loaded materials will find use in radioanalytical methods development and/or serve as a starting material for the synthesis of more complex nuclear explosion debris forms (e.g., Trinitite). (author)

  10. Influence of Substrate Temperature on Structural, Electrical and Optical Properties of Ito Thin Films Prepared by RF Magnetron Sputtering

    Science.gov (United States)

    He, Bo; Zhao, Lei; Xu, Jing; Xing, Huaizhong; Xue, Shaolin; Jiang, Meng

    2013-10-01

    In this paper, we investigated indium-tin-oxide (ITO) thin films on glass substrates deposited by RF magnetron sputtering using ceramic target to find the optimal condition for fabricating optoelectronic devices. The structural, electrical and optical properties of the ITO films prepared at various substrate temperatures were investigated. The results indicate the grain size increases with substrate temperature increases. As the substrate temperature grew up, the resistivity of ITO films greatly decreased. The ITO film possesses high quality in terms of electrode functions, when substrate temperature is 480°C. The resistivity is as low as 9.42 × 10-5 Ω•cm, while the carrier concentration and mobility are as high as 3.461 × 1021 atom/cm3 and 19.1 cm2/Vṡs, respectively. The average transmittance of the film is about 95% in the visible region. The novel ITO/np-Silicon frame, which prepared by RF magnetron sputtering at 480°C substrate temperature, can be used not only for low-cost solar cell, but also for high quantum efficiency of UV and visible lights enhanced photodetector for various applications.

  11. Preparing Al-Mg Substrate for Thermal Spraying: Evaluation of Surface State After Different Pretreatments

    Science.gov (United States)

    Lukauskaitė, R.; Valiulis, A. V.; Černašėjus, O.; Škamat, J.; Rębiś, J. A.

    2016-08-01

    The article deals with the pretreatment technique for preparing the surface of aluminum alloy EN AW 5754 before thermal spray. The surface after different pretreatments, including degreasing with acetone, chemical etching with acidic and alkali solutions, grit-blasting, cathodic cleaning, and some combinations of these techniques, has been studied. The investigation of pre-treated surfaces covered the topographical study (using scanning electron microscopy, atomic force microscopy, and 3D profilometry), the chemical analysis by x-ray photoelectron spectroscopy, the evaluation of surface wettability (sessile drop method), and the assessment of surface free energy. Compared with all the techniques used in present work, the cathodic cleaning and its combination with grit-blasting provide the most preferable chemistry of the surface. Due to the absence of hydroxides at the surface and, possible, due to the diffusion of magnesium to the surface of substrate, the surface wettability and the surface free energy have been significantly improved. No direct correlation between the surface topography and the surface wettability has been established.

  12. Are mushrooms radioactive?

    International Nuclear Information System (INIS)

    Randa, Z.; Benada, J.; Singert, M.; Horyna, J.

    1988-01-01

    Tabulated is the content of 137 Cs in dry matter of higher mushrooms collected in the years 1986 to 1987. The radioactive level of mushrooms collected in Czechoslovakia such as Boletus badius and B. chrysenteron reached 20 to 50 kBq/kg of dry matter. The individual dose at mean consumption of these mushrooms was estimated at 0.2 to 0.3 mSv/year which amounted to 20 to 30% of the dose from the natural background. (J.B.). 1 tab

  13. A homogeneous, high-throughput assay for phosphatidylinositol 5-phosphate 4-kinase with a novel, rapid substrate preparation.

    Directory of Open Access Journals (Sweden)

    Mindy I Davis

    Full Text Available Phosphoinositide kinases regulate diverse cellular functions and are important targets for therapeutic development for diseases, such as diabetes and cancer. Preparation of the lipid substrate is crucial for the development of a robust and miniaturizable lipid kinase assay. Enzymatic assays for phosphoinositide kinases often use lipid substrates prepared from lyophilized lipid preparations by sonication, which result in variability in the liposome size from preparation to preparation. Herein, we report a homogeneous 1536-well luciferase-coupled bioluminescence assay for PI5P4Kα. The substrate preparation is novel and allows the rapid production of a DMSO-containing substrate solution without the need for lengthy liposome preparation protocols, thus enabling the scale-up of this traditionally difficult type of assay. The Z'-factor value was greater than 0.7 for the PI5P4Kα assay, indicating its suitability for high-throughput screening applications. Tyrphostin AG-82 had been identified as an inhibitor of PI5P4Kα by assessing the degree of phospho transfer of γ-(32P-ATP to PI5P; its inhibitory activity against PI5P4Kα was confirmed in the present miniaturized assay. From a pilot screen of a library of bioactive compounds, another tyrphostin, I-OMe tyrphostin AG-538 (I-OMe-AG-538, was identified as an ATP-competitive inhibitor of PI5P4Kα with an IC(50 of 1 µM, affirming the suitability of the assay for inhibitor discovery campaigns. This homogeneous assay may apply to other lipid kinases and should help in the identification of leads for this class of enzymes by enabling high-throughput screening efforts.

  14. Structure of d-3-hydroxybutyrate dehydrogenase prepared in the presence of the substrate d-3-hydroxybutyrate and NAD+

    International Nuclear Information System (INIS)

    Hoque, Md Mominul; Shimizu, Satoru; Juan, Ella Czarina Magat; Sato, Yoshiteru; Hossain, Md Tofazzal; Yamamoto, Tamotsu; Imamura, Shigeyuki; Suzuki, Kaoru; Amano, Hitoshi; Sekiguchi, Takeshi; Tsunoda, Masaru; Takénaka, Akio

    2009-01-01

    The crystal structure of A. faecalisd-3-hydroxybutyrate dehydrogenase prepared in the presence of d-3-hydroxybutyrate and NAD + reveals the substrate/product-binding geometry as the first example which suggests that the catalytic reaction occurs by shuttle movements of a hydrogen negative ion from the substrate to NAD + and from NADH to the product. d-3-Hydroxybutyrate dehydrogenase from Alcaligenes faecalis catalyzes the reversible conversion between d-3-hydroxybutyrate and acetoacetate. The enzyme was crystallized in the presence of the substrate d-3-hydroxybutyrate and the cofactor NAD + at the optimum pH for the catalytic reaction. The structure, which was solved by X-ray crystallography, is isomorphous to that of the complex with the substrate analogue acetate. The product as well as the substrate molecule are accommodated well in the catalytic site. Their binding geometries suggest that the reversible reactions occur by shuttle movements of a hydrogen negative ion from the C3 atom of the substrate to the C4 atom of NAD + and from the C4 atom of NADH to the C3 atom of the product. The reaction might be further coupled to the withdrawal of a proton from the hydroxyl group of the substrate by the ionized Tyr155 residue. These structural features strongly support the previously proposed reaction mechanism of d-3-hydroxybutyrate dehydrogenase, which was based on the acetate-bound complex structure

  15. Cesium fixation in mushrooms

    International Nuclear Information System (INIS)

    Keller, C.

    1990-01-01

    It has been found that the various mushroom species accumulate Cs-137 in very different quantities. Whereas specimens of the species Xeromus badius always contained high amounts of Cs-137, analyses of specimens of the related species Boletus edulis showed only weak accumulation of the radionuclide. It is assumed that this general difference in accumulation of Cs-137 is due to a difference in the organic constituents of the mushrooms. (orig.) [de

  16. Defect studies of ZnO films prepared by pulsed laser deposition on various substrates

    International Nuclear Information System (INIS)

    Melikhova, O; Čížek, J; Procházka, I; Kužel, R; Novotný, M; Bulír, J; Lancok, J; Anwand, W; Brauer, G; Connolly, J; McCarthy, E; Krishnamurthy, S; Mosnier, J-P

    2013-01-01

    ZnO thin films deposited on various substrates were characterized by slow positron implantation spectroscopy (SPIS) combined with X-ray diffraction (XRD). All films studied exhibit wurtzite structure and crystallite size 20–100 nm. The mosaic spread of crystallites is relatively small for the films grown on single crystalline substrates while it is substantial for the film grown on amorphous substrate. SPIS investigations revealed that ZnO films deposited on single crystalline substrates exhibit significantly higher density of defects than the film deposited on amorphous substrate. This is most probably due to a higher density of misfit dislocations, which compensate for the lattice mismatch between the film and the substrate.

  17. Porous Chromatographic Materials as Substrates for Preparing Synthetic Nuclear Explosion Debris Particles

    International Nuclear Information System (INIS)

    Harvey, Scott D.; Liezers, Martin; Antolick, Kathryn C.; Garcia, Ben J.; Sweet, Lucas E.; Carman, April J.; Eiden, Gregory C.

    2013-01-01

    In this study, we investigated several porous chromatographic materials as synthetic substrates for preparing surrogate nuclear explosion debris particles. The resulting synthetic debris materials are of interest for use in developing analytical methods. Eighteen metals, including some of forensic interest, were loaded onto materials by immersing them in metal solutions (556 mg/L of each metal) to fill the pores, applying gentle heat (110°C) to drive off water, and then treating them at high temperatures (up to 800°C) in air to form less soluble metal species. High-boiling-point metals were uniformly loaded on spherical controlled-pore glass to emulate early fallout, whereas low-boiling-point metals were loaded on core-shell silica to represent coated particles formed later in the nuclear fallout-formation process. Analytical studies were applied to characterize solubility, material balance, and formation of recalcitrant species. Dissolution experiments indicated loading was 1.5 to 3 times higher than expected from the pore volume alone, a result attributed to surface coating. Analysis of load solutions before and after filling the material pores revealed that most metals were passively loaded; that is, solutions filled the pores without active metal discrimination. However, niobium and tin concentrations were lower in solutions after pore filling, and were found in elevated concentrations in the final products, indicating some metals were selectively loaded. High-temperature treatments caused reduced solubility of several metal species, and loss of some metals (rhenium and tellurium) because volatile species were formed. Sample preparation reproducibility was high (the inter-batch relative standard deviation was 7.8%, and the intra-batch relative standard deviation was 0.84%) indicating that this material is suitable for use as a working standard for analytical methods development. We anticipate future standardized radionuclide-loaded materials will find use in

  18. Influence of substrate preparation on the shaping of the topography of the surface of nanoceramic oxide layers

    Science.gov (United States)

    Bara, Marek; Kubica, Marek

    2014-02-01

    The paper discusses the shaping mechanism and changes occurring in the structure and topography of the surface of nanoceramic oxide layers during their formation. The paper presents the influence of substrate preparation on the surface topography of oxide layers. The layers were produced via hard anodizing on the EN AW-5251 aluminum alloy. The layers obtained were subjected to microscope examinations, image and chemical composition analyses, and stereometric examinations. Heredity of substrate properties in the topography of the surface of nanoceramic oxide layers formed as a result of electrochemical oxidation has been shown.

  19. Detection of Benzoic Acid by an Amperometric Inhibitor Biosensor Based on Mushroom Tissue Homogenate

    Directory of Open Access Journals (Sweden)

    Mustafa Kemal Sezgintürk

    2005-01-01

    Full Text Available An amperometric benzoic acid-sensing inhibitor biosensor was prepared by immobilizing mushroom (Agaricus bisporus tissue homogenate on a Clark-type oxygen electrode. The effects of the quantity of mushroom tissue homogenate, the quantity of gelatin and the effect of the crosslinking agent glutaraldehyde percent on the biosensor were studied. The optimum concentration of phenol used as substrate was 200 μM. The bioanalytical properties of the proposed biosensor, such as dependence of the biosensor response on the pH value and the temperature, were investigated. The biosensor responded linearly to benzoic acid in a concentration range of 25–100 μM. Standard deviation (s.d. was ±0.49 μM for 7 successive determinations at a concentration of 75 μM. The inhibitor biosensor based on mushroom tissue homogenate was applied for the determination of benzoic acid in fizzy lemonade, some fruits and groundwater samples. Results were compared to those obtained using AOAC method, showing a good agreement.

  20. Use of spent mushroom substrates from Agaricus subrufescens (syn. A. blazei, A. brasiliensis) and Lentinula edodes productions in the enrichment of a soil-based potting media for lettuce (Lactuca sativa) cultivation: Growth promotion and soil bioremediation.

    Science.gov (United States)

    Ribas, L C C; de Mendonça, M M; Camelini, C M; Soares, C H L

    2009-10-01

    This study aimed to assess physicochemical and microbiological properties of fresh spent mushroom substrates (SMSs)--without post-crop heat treatment--from Agaricus subrufescens and Lentinula edodes production to optimize the use of these residues in the soil enrichment for lettuce growth promotion and soil remediation. Organic matter and C content of both SMSs were high. Fresh A. subrufescens SMS was a good source of N, P and K. On the other hand, L. edodes SMS presented a lower concentration of these nutrients and a high level of immaturity. Both SMSs presented high electric conductivity values (2.5-3.4 mS/cm). Microbiological analysis, based upon enumeration of culturable bacteria (thermophilic and mesophilic) and fungi, and also evolution of CO(2), showed that SMSs played higher microbial diversity than soil control. Laccase activity from A. subrufescens SMS tended to remain constant during a 2-month period, while L. edodes SMS presented low laccase activity throughout the same period. Agaricus subrufescens and L. edodes were able to grow on a PDA (Potato Dextrose Agar) media supplemented with different concentrations of atrazine (1-50 microg/ml), degraded the herbicide, attaining rates of 35% and 26%, respectively. On experiments of lettuce growth promotion using a soil-based potting media with different SMS rates, 5% and 10% (dw) rates of A. subrufescens SMS resulted in higher lettuce aerial dry weights than the rates of 25% and 40%, the chemical fertilization (NPK) and the control (soil). At 10% supplementation, lettuce aerial dry weight increased 2.2 and 1.3 times compared to the control and the NPK treatment, respectively. Protein content increased along with SMS rates. Fresh A. subrufescens SMS was an excellent supplement for lettuce growth promotion and showed potential for remediation of biocides possibly due to improved microbial diversity and enzymatic activity. Fresh L. edodes SMS was not a good fertilizer, at least under the conditions tested

  1. Food, medicinal and environmental values of mushrooms Pleurotus ostreatus

    Directory of Open Access Journals (Sweden)

    O. M. Alekseenko

    2010-07-01

    Full Text Available We present the literature review describing food, medicinal and ecological properties of the fungus Pleurotus ostreatus (oyster mushroom. It is shown that the mushroom is adequate foodstuff for human beings. It provides with proteins, carbohydrates, fats, vitamins and mineral salts. Protein of the oyster mushrooms’ mycothallus contains 18 amino acids, eight of which were essential (isoleucine, leucine, lysine, methionine, phenylalanine, tryptophan, threonine, and valine. Therapeutic value of the mushroom is characterised by a content of water-soluble (thiamine B1, riboflavin B2, niacin, B5, PP, pyridoxine B6, biotin B7, ascorbic and pantothenic acid and liposoluble (calciferol, ergosterol, tocopherol vitamins. The considerable gains from the farm wastes use for the mushrooms raising with subsequent application of the substrate in plant cultivation and animal husbandry are stated.

  2. Preparation, characterization and microstructural optimization of a thin {gamma}-alumina membrane on a porous stainless steel substrate

    Energy Technology Data Exchange (ETDEWEB)

    Abedini, Sanam [Department of Mining and Metallurgical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Hafez Street, Tehran (Iran, Islamic Republic of); Parvin, Nader, E-mail: naderparvin@yahoo.com [Department of Mining and Metallurgical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Hafez Street, Tehran (Iran, Islamic Republic of); Ashtari, Parviz [Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of)

    2012-01-30

    Highlights: Black-Right-Pointing-Pointer A mesoporous {gamma}-Al{sub 2}O{sub 3} membrane was synthesized on conventional {alpha}-Al{sub 2}O{sub 3} substrates. Black-Right-Pointing-Pointer {gamma}-Al{sub 2}O{sub 3} membrane was potential for CO{sub 2} separation at high pressure test conditions. Black-Right-Pointing-Pointer Thus, it was required to provide the membrane layer with more strength. Black-Right-Pointing-Pointer {alpha}-Alumina substrate was substituted with porous stainless steel. Black-Right-Pointing-Pointer A stainless steel supported {alpha}-Al{sub 2}O{sub 3} membrane with better properties was synthesized. - Abstract: In this work, a supported mesoporous (MEP) {gamma}-Al{sub 2}O{sub 3} membrane was synthesized on conventional {alpha}-Al{sub 2}O{sub 3} substrates by sol-gel dip coating process. In the following, the preparation of a novel metallic-ceramic composite membrane was studied, which incorporated desirable properties of both ceramic membrane and porous metallic substrate. For this purpose, mesoporous alumina membrane layer was developed on a porous 316L stainless steel substrate. The substrate was prepared by loose powder sintering and modified by soaking-rolling and fast drying method. The prepared membranes were characterized using scanning electron microscope (SEM), field emission scanning electron microscope (FESEM), X-ray diffractometer (XRD) and N{sub 2}-adsorption/desorption measurements (BET analyses). The results revealed that a defect-free {gamma}-alumina membrane with 2.1 nm average pore size can be produced. Permeation tests with N{sub 2} gas revealed that the stainless steel substrate had 40 times more permeability than conventionally used alumina support. Additionally, single gas permeation of {gamma}-alumina membrane for CO{sub 2} and N{sub 2} was compared. It was observed that CO{sub 2} could be separated from N{sub 2} by the MEP {gamma}-Al{sub 2}O{sub 3} membrane in high pressure permeation condition, where stainless steel

  3. Large-scale uniform bilayer graphene prepared by vacuum graphitization of 6H-SiC(0001) substrates

    Science.gov (United States)

    Wang, Qingyan; Zhang, Wenhao; Wang, Lili; He, Ke; Ma, Xucun; Xue, Qikun

    2013-03-01

    We report on the preparation of large-scale uniform bilayer graphenes on nominally flat Si-polar 6H-SiC(0001) substrates by flash annealing in ultrahigh vacuum. The resulting graphenes have a single thickness of one bilayer and consist of regular terraces separated by the triple SiC bilayer steps on the 6H-SiC(0001) substrates. In situ scanning tunneling microscopy reveals that suppression of pit formation on terraces and uniformity of SiC decomposition at step edges are the key factors to the uniform thickness. By studying the surface morphologies prepared under different annealing rates, it is found that the annealing rate is directly related to SiC decomposition, diffusion of the released Si/C atoms and strain relaxation, which together determine the final step structure and density of defects.

  4. Process for depositing an oxide epitaxially onto a silicon substrate and structures prepared with the process

    Science.gov (United States)

    McKee, Rodney A.; Walker, Frederick J.

    1993-01-01

    A process and structure involving a silicon substrate utilizes an ultra high vacuum and molecular beam epitaxy (MBE) methods to grow an epitaxial oxide film upon a surface of the substrate. As the film is grown, the lattice of the compound formed at the silicon interface becomes stabilized, and a base layer comprised of an oxide having a sodium chloride-type lattice structure grows epitaxially upon the compound so as to cover the substrate surface. A perovskite may then be grown epitaxially upon the base layer to render a product which incorporates silicon, with its electronic capabilities, with a perovskite having technologically-significant properties of its own.

  5. Effects of bias voltage on the properties of ITO films prepared on polymer substrates

    International Nuclear Information System (INIS)

    Lee, Jaehyeong; Jung, Hakkee; Lim, Donggun; Yang, Keajoon; Song, Woochang; Yi, Junsin

    2005-01-01

    The ITO (indium tin oxide) thin films were deposited on acryl, glass, PET, and poly-carbonate substrates by DC reactive magnetron sputtering. The bias voltage was changed from -20 to -80 V. As the bias voltage increased, the deposition rate of ITO films decreased regardless of substrate types. The roughness of the films on PET increased with the bias voltage. The study demonstrated that the bias improved the electrical and optical properties of ITO films regardless of substrate types. The lowest electrical resistivity of 5.5x10 -4 no. OMEGAno. -cm and visible transmittance of about 80% were achieved by applying a negative bias of -60 V

  6. Facile and scalable preparation of highly wear-resistance superhydrophobic surface on wood substrates using silica nanoparticles modified by VTES

    Energy Technology Data Exchange (ETDEWEB)

    Jia, Shanshan; Liu, Ming [College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004 (China); Wu, Yiqiang, E-mail: wuyq0506@126.com [College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004 (China); Hunan Provincial Collaborative Innovation Center for High-efficiency Utilization of Wood and Bamboo Resources, Central South University of Forestry and Technology, Changsha 410004 (China); Luo, Sha [College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004 (China); Qing, Yan, E-mail: qingyan0429@163.com [College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004 (China); Hunan Provincial Collaborative Innovation Center for High-efficiency Utilization of Wood and Bamboo Resources, Central South University of Forestry and Technology, Changsha 410004 (China); Chen, Haibo [College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004 (China)

    2016-11-15

    Graphical abstract: Highly wear-resistance superhydrophobic surface on wood substrates was fabricated using silica nanoparticles modified by VTES. Display Omitted - Highlights: • Superhydrophobic surface on wood substrates was efficiently fabricated using nanoparticles modified by VTES. • The superhydrophobic surface exhibited a CA of 154° and a SAclose to 0°. • The superhydrophobic surface showed a durable and robust wear-resistance performance. - Abstract: In this study, an efficient, facile method has been developed for fabricating superhydrophobic surfaces on wood substrates using silica nanoparticles modified by VTES. The as-prepared superhydrophobic wood surface had a water contact angle of 154° and water slide angle close to 0°. Simultaneously, this superhydrophobic wood showed highly durable and robust wear resistance when having undergone a long period of sandpaper abrasion or being scratched by a knife. Even under extreme conditions of boiling water, the superhydrophobicity of the as-prepared wood composite was preserved. Characterizations by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy showed that a typical and tough hierarchical micro/nanostructure was created on the wood substrate and vinyltriethoxysilane contributed to preventing the agglomeration of silica nanoparticles and serving as low-surface-free-energy substances. This superhydrophobic wood was easy to fabricate, mechanically resistant and exhibited long-term stability. Therefore, it is considered to be of significant importance in the industrial production of functional wood, especially for outdoor applications.

  7. Preparation and magnetic properties of Ni–P–La coating by electroless plating on silicon substrate

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Yun [Tianjin Key Laboratory of Composite and Functional Materials, School of Materials Science and Engineering, Tianjin University, Tianjin 300072 (China); Wang, Jihui, E-mail: jhwang@tju.edu.cn [Tianjin Key Laboratory of Composite and Functional Materials, School of Materials Science and Engineering, Tianjin University, Tianjin 300072 (China); Yuan, Jing [Tianjin Key Laboratory of Composite and Functional Materials, School of Materials Science and Engineering, Tianjin University, Tianjin 300072 (China); College of Physics and Electronic Information Engineering, Qinghai University for Nationalities, Xining, Qinghai 810007 (China); Li, Haiqin [College of Physics and Electronic Information Engineering, Qinghai University for Nationalities, Xining, Qinghai 810007 (China)

    2016-02-28

    Graphical abstract: The content of Ni phase, which is the main ferromagnetic phase in Ni–P–La coating, is almost increased linearly with the concentration of La in plating solution. - Highlights: • The La element improves the magnetic properties of Ni–P–La coating. • Magnetism increases but the stability of bath decreases with La content and pH. • Coatings peel off at high temperature (≥80 °C) and magnetism is weak in short time. • The optimum is the La{sub 2}O{sub 3} of 10 mg L{sup −1}, pH of 5.0, temperature of 75 °C and time of 45 min. - Abstract: Ni–P–La coatings were prepared on Si substrate by electroless plating method under different La content, pH value, plating temperature and plating time. The surface morphology, chemical composition, structure and magnetic properties of coatings were observed and determined by scanning electron microscope (SEM), energy dispersive X-ray spectrometry (EDS), X-ray diffractometer (XRD) and vibrating sample magnetometer (VSM). The results showed that Ni–P–La coating is smooth and uniform with a cellular morphology grown in columnar manner. With the increase of La content, pH value and plating time, the thickness and saturation magnetization of coating are increased continuously, but the stability of plating bath is decreased greatly with La content and pH value. Under higher plating temperature, the thickness and saturation magnetization of coatings are obviously enhanced. But too high plating temperature is harmful to the plating bath and coating. The optimum plating conditions for Ni–P–La coating is La{sub 2}O{sub 3} addition of 10 mg L{sup −1}, pH value of 5.0, plating temperature of 75 °C and plating time of 45 min. The role of La element is to benefit the deposition of Ni element, promote the formation of Ni phase during the annealing process, and thus improve the magnetic properties of Ni–P–La coating.

  8. Transmission Electron Microscopy (TEM) Sample Preparation of Si(1-x)Gex in c-Plane Sapphire Substrate

    Science.gov (United States)

    Kim, Hyun Jung; Choi, Sang H.; Bae, Hyung-Bin; Lee, Tae Woo

    2012-01-01

    The National Aeronautics and Space Administration-invented X-ray diffraction (XRD) methods, including the total defect density measurement method and the spatial wafer mapping method, have confirmed super hetero epitaxy growth for rhombohedral single crystalline silicon germanium (Si1-xGex) on a c-plane sapphire substrate. However, the XRD method cannot observe the surface morphology or roughness because of the method s limited resolution. Therefore the authors used transmission electron microscopy (TEM) with samples prepared in two ways, the focused ion beam (FIB) method and the tripod method to study the structure between Si1-xGex and sapphire substrate and Si1?xGex itself. The sample preparation for TEM should be as fast as possible so that the sample should contain few or no artifacts induced by the preparation. The standard sample preparation method of mechanical polishing often requires a relatively long ion milling time (several hours), which increases the probability of inducing defects into the sample. The TEM sampling of the Si1-xGex on sapphire is also difficult because of the sapphire s high hardness and mechanical instability. The FIB method and the tripod method eliminate both problems when performing a cross-section TEM sampling of Si1-xGex on c-plane sapphire, which shows the surface morphology, the interface between film and substrate, and the crystal structure of the film. This paper explains the FIB sampling method and the tripod sampling method, and why sampling Si1-xGex, on a sapphire substrate with TEM, is necessary.

  9. Edible wild mushrooms of the Western Ghats: Data on the ethnic knowledge

    Directory of Open Access Journals (Sweden)

    Namera C. Karun

    2017-10-01

    Full Text Available The edible wild mushrooms are most important in food security of ethnic groups and tribals throughout the world. Various indigenous strategies are followed to trace wild mushrooms suitable for human consumption. Data presented in this article projects ethnic knowledge on 51 edible wild mushrooms (in 23 genera in the Western Ghats region of India. Information collected with support of ethnic groups/tribals pertains to habitats, substrates, mutualistic association, extent of availability, extent of edibility and method of processing of wild mushrooms. Extensive field visits and interactions with ethnic groups were performed to collect the data on each mushroom. Initially, most of these mushrooms were identified based on the indigenous methods and designated with vernacular names (Are-Gowda, Kodava and Tulu. Based on macromorphology (in field and micromorphology (in laboratory, each mushroom was identified with its systematic name. Among the 51 wild mushrooms irrespective of extent of availability, the most preferred include Astraeus hygrometricus, Clitocybe infundibuliformis, Fistulina hepatica, Lentinus sajor-caju, Pleurotus (5 spp. and Scleroderma citrinum and Termitomyces (18 spp.. This data forecasts the importance of documentation of traditional knowledge, protection of habitats, management of resources (tree species and substrates and sustainable exploitation of wild mushrooms.

  10. JORDANIAN ZEOLITIC TUFF AS A RAW MATERIAL FOR THE PREPARATION OF SUBSTRATES USED FOR PLANT GROWTH

    Directory of Open Access Journals (Sweden)

    Ivan Manolov

    2006-07-01

    Full Text Available One of the problems faced in front of industry for potting media is limited amount of quality row materials (mainly peat for unlimited production of quality substrates in the future. The using of natural minerals for production of substrates or as amendments for existing substrates is possible solution for this problem. The natural zeolites with their specific properties – high CEC, high content of macro and microelements are one of good alternatives to the traditional potting media. Each zeolite deposit has unique chemical composition, physical and mechanical properties. That is why obligatory preliminary condition for their successful application in agriculture is caring out of biological study with agricultural plants for determination of the optimal parameters of chemical and physicochemical properties of the substrates.

  11. Antioxidants of Edible Mushrooms

    Directory of Open Access Journals (Sweden)

    Maja Kozarski

    2015-10-01

    Full Text Available Oxidative stress caused by an imbalanced metabolism and an excess of reactive oxygen species (ROS lead to a range of health disorders in humans. Our endogenous antioxidant defense mechanisms and our dietary intake of antioxidants potentially regulate our oxidative homeostasis. Numerous synthetic antioxidants can effectively improve defense mechanisms, but because of their adverse toxic effects under certain conditions, preference is given to natural compounds. Consequently, the requirements for natural, alternative sources of antioxidant foods identified in edible mushrooms, as well as the mechanistic action involved in their antioxidant properties, have increased rapidly. Chemical composition and antioxidant potential of mushrooms have been intensively studied. Edible mushrooms might be used directly in enhancement of antioxidant defenses through dietary supplementation to reduce the level of oxidative stress. Wild or cultivated, they have been related to significant antioxidant properties due to their bioactive compounds, such as polyphenols, polysaccharides, vitamins, carotenoids and minerals. Antioxidant and health benefits, observed in edible mushrooms, seem an additional reason for their traditional use as a popular delicacy food. This review discusses the consumption of edible mushrooms as a powerful instrument in maintaining health, longevity and life quality.

  12. Surface treatment of glass substrates for the preparation of long-lived carbon stripper foils

    International Nuclear Information System (INIS)

    Takeuchi, Suehiro; Takekoshi, Eiko

    1981-02-01

    Glass substrates having uniformly distributed microscopic grains on the surfaces are useful to make long-lived carbon stripper foils for heavy ions. A method of surface treatment of glass substrates to form the surface structure is described. This method consists of precipitation of glass components, such as soda, onto the surfaces in a hot and humid atmosphere and a fogging treatment of forming microscopic grains of the precipitated substances. Some results of studies on the treatment conditions are also presented. (author)

  13. Substrate Effect on Carbon/Ceramic Mixed Matrix Membrane Prepared by a Vacuum-Assisted Method for Desalination

    Directory of Open Access Journals (Sweden)

    Yingjun Song

    2018-05-01

    Full Text Available This work investigates the effect of various membrane substrates and coating conditions on the formation of carbon/ceramic mixed matrix membranes for desalination application. The substrates were impregnated with phenolic resin via a vacuum-assisted method followed by carbonization under an inert gas. Substrates with pore sizes of 100 nm required a single impregnation step only, where short vacuum times (<120 s resulted in low quality membranes with defects. For vacuum times of ≥120 s, high quality membranes with homogeneous impregnation were prepared leading to high salt rejection (>90% and high water fluxes (up to 25 L m−2 h−1. The increase in water flux as a function of the vacuum time confirms the vacuum etching effect resulting from the vacuum-assisted method. Substrates with pore sizes of 140 nm required two impregnation steps. These pores were too large for the ceramic inter-particle space to be filled with phenolic resin via a single step. In the second impregnation step, increasing the concentration of the phenolic resin resulted in membranes with lower water fluxes. These results indicate that thicker films were formed by increasing the phenolic resin concentration. In the case of substrates with pores of 600 nm, these pores were too large and inter-particle space filling with phenolic resin was not attained.

  14. Substrate temperature effects on the structure and properties of ZnMnO films prepared by pulsed laser deposition

    Science.gov (United States)

    Riascos, H.; Duque, J. S.; Orozco, S.

    2017-01-01

    ZnMnO thin films were grown on silicon substrates by pulsed laser deposition (PLD). Pulsed Nd:YAG laser was operated at a wavelength of 1064 nm and 100 mJ. ZnMnO thin films were deposited at the vacuum pressure of 10-5 Torr and with substrate temperature from room temperature to 600 °C. The effects of substrate temperature on the structural and Optical properties of ZnMnO thin films have been investigated by X-ray diffraction (XRD), Raman spectroscopy and Uv-vis spectroscopy. From XRD data of the samples, it can be showed that temperature substrate does not change the orientation of ZnMnO thin films. All the films prepared have a hexagonal wurtzite structure, with a dominant (002) peak around 2θ=34.44° and grow mainly along the c-axis orientation. The substrate temperature improved the crystallinity of the deposited films. Uv-vis analysis showed that, the thin films exhibit high transmittance and low absorbance in the visible region. It was found that the energy band to 300 ° C is 3.2 eV, whereas for other temperatures the values were lower. Raman reveals the crystal quality of ZnMnO thin films.

  15. Microstructures and formation mechanism of W–Cu composite coatings on copper substrate prepared by mechanical alloying method

    International Nuclear Information System (INIS)

    Meng, Yunfei; Shen, Yifu; Chen, Cheng; Li, Yongcan; Feng, Xiaomei

    2013-01-01

    In the present work, high-energy mechanical alloying (MA) method was applied to prepare tungsten–copper composite coatings on pure copper surface using a planetary ball mill. During mechanical alloying process, grains on the surface layer of substrate were refined and the substrate surface was activated as a result of repeated collisions by a large number of flying balls along with powder particles. The repeated ball-to-substrate collisions resulted in the deposition of coatings. The microstructures and elemental and phase composition of mechanically alloyed coatings at different milling durations during mechanical alloying process were studied using scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS). Microhardness tests were carried out to examine the mechanical properties of the coatings. The results showed that the coatings and the substrates were well bonded, and with the increase of the milling duration, multi-layered coatings with different structures were generated and the coatings became denser. The microhardness tests showed that the maximum microhardness of the coatings reached HV 0.1 228, showing a threefold improvement upon the substrate. And the cross-sectional microhardness values of the processed sample changed gradually, which gave a proof for the cushioning and sustaining functions of the multi-layered coatings. A reasonable formation mechanism of coatings on bulk materials with metallic immiscible system by mechanical alloying method was presented.

  16. Preparation and structural characterization of FeCo epitaxial thin films on insulating single-crystal substrates

    International Nuclear Information System (INIS)

    Nishiyama, Tsutomu; Ohtake, Mitsuru; Futamoto, Masaaki; Kirino, Fumiyoshi

    2010-01-01

    FeCo epitaxial films were prepared on MgO(111), SrTiO 3 (111), and Al 2 O 3 (0001) single-crystal substrates by ultrahigh vacuum molecular beam epitaxy. The effects of insulating substrate material on the film growth process and the structures were investigated. FeCo(110) bcc films grow on MgO substrates with two type domains, Nishiyama-Wassermann (NW) and Kurdjumov-Sachs (KS) relationships. On the contrary, FeCo films grown on SrTiO 3 and Al 2 O 3 substrates include FeCo(111) bcc crystal in addition to the FeCo(110) bcc crystals with NW and KS relationships. The FeCo(111) bcc crystal consists of two type domains whose orientations are rotated around the film normal by 180 deg. each other. The out-of-plane and the in-plane lattice spacings of FeCo(110) bcc and FeCo(111) bcc crystals formed on the insulating substrates are in agreement with those of the bulk Fe 50 Co 50 (at. %) crystal with small errors ranging between +0.2% and +0.4%, showing that the strains in the epitaxial films are very small.

  17. Microbial ecology of the Agaricus bisporus mushroom cropping process.

    Science.gov (United States)

    McGee, Conor F

    2018-02-01

    Agaricus bisporus is the most widely cultivated mushroom species in the world. Cultivation is commenced by inoculating beds of semi-pasteurised composted organic substrate with a pure spawn of A. bisporus. The A. bisporus mycelium subsequently colonises the composted substrate by degrading the organic material to release nutrients. A layer of peat, often called "casing soil", is laid upon the surface of the composted substrate to induce the development of the mushroom crop and maintain compost environmental conditions. Extensive research has been conducted investigating the biochemistry and genetics of A. bisporus throughout the cultivation process; however, little is currently known about the wider microbial ecology that co-inhabits the composted substrate and casing layers. The compost and casing microbial communities are known to play important roles in the mushroom production process. Microbial species present in the compost and casing are known for (1) being an important source of nitrogen for the A. bisporus mycelium, (2) releasing sugar residues through the degradation of the wheat straw in the composted substrate, (3) playing a critical role in inducing development of the A. bisporus fruiting bodies and (4) acting as pathogens by parasitising the mushroom mycelium/crop. Despite a long history of research into the mushroom cropping process, an extensive review of the microbial communities present in the compost and casing has not as of yet been undertaken. The aim of this review is to provide a comprehensive summary of the literature investigating the compost and casing microbial communities throughout cultivation of the A. bisporus mushroom crop.

  18. Preparation and surface characterization of plasma-treated and biomolecular-micropatterned polymer substrates

    Science.gov (United States)

    Langowski, Bryan Alfred

    A micropatterning process creates distinct microscale domains on substrate surfaces that differ from the surfaces' original chemical/physical properties. Numerous micropatterning methods exist, each having relative advantages and disadvantages in terms of cost, ease, reproducibility, and versatility. Polymeric surfaces micropatterned with biomolecules have many applications, but are specifically utilized in tissue engineering as cell scaffolds that attempt to controlled tissue generation in vivo and ex vivo. As the physical and chemical cues presented by micropatterned substrates control resulting cellular behavior, characterization of these cues via surface-sensitive analytical techniques is essential in developing cell scaffolds that mimic complex in vivo physicochemical environments. The initial focus of this thesis is the chemical and physical characterization of plasma-treated, microcontact-printed (muCP) polymeric substrates used to direct nerve cell behavior. Unmodified and oxygen plasma-treated poly(methyl methacrylate) (PMMA) substrates were analyzed by surface sensitive techniques to monitor plasma-induced chemical and physical modifications. Additionally, protein-micropattern homogeneity and size were microscopically evaluated. Lastly, poly(dimethylsiloxane) (PDMS) stamps and contaminated PMMA substrates were characterized by spectroscopic and microscopic methods to identify a contamination source during microcontact printing. The final focus of this thesis is the development of microscale plasma-initiated patterning (muPIP) as a versatile, reproducible micropatterning method. Using muPIP, polymeric substrates were micropatterned with several biologically relevant inks. Polymeric substrates were characterized following muPIP by surface-sensitive techniques to identify the technique's underlying physical and chemical bases. In addition, neural stem cell response to muPIP-generated laminin micropatterns was microscopically and biologically evaluated

  19. Selenium content of mushrooms.

    Science.gov (United States)

    Stijve, T

    1977-07-29

    The selenium contents of 83 species of wild mushrooms were determined by oxygen combustion of the sample, followed by conversion of selenite to bromopiazselenol and final estimation by electron capture gas-liquid chromatography. Selenium concentration were found to range from 0.012-20.0 mg/kg dry weight. Selenium content was species-dependent. High concentrations were found in Agaricaceae and in certain Boletaceae of the genus Tubiporus, whereas in Russulaceae, Amanitaceae and Cantharellaceae selenium-rich species were absent or rare. Ascomycetes and all mushrooms growing on wood had a very low selenium content. The highest selenium concentrations (up to 20 ppm) were found in Boletus (Tubiporus) edulis, a most popular edible mushroom. Analyses of various parts of carpophores of B. edulis, Suillus luteus and Amanita muscaria indicate that in all three species the stalk contains less selenium than the fleshy part of the cap. In Boletus and Suillus the highest selenium content was found in the tubes.

  20. Effect of substrate porosity on photoluminescence properties of ZnS films prepared on porous Si substrates by pulsed laser deposition

    Science.gov (United States)

    Wang, Cai-Feng; Li, Qing-Shan; Zhang, Li-Chun; Lv, Lei; Qi, Hong-Xia

    2007-05-01

    ZnS films were deposited on porous Si (PS) substrates with different porosities by pulsed laser deposition. The photoluminescence spectra of the samples were measured to study the effect of substrate porosity on luminescence properties of ZnS/porous Si composites. After deposition of ZnS films, the red photoluminescence peak of porous Si shows a slight blueshift compared with as-prepared porous Si samples. With an increase of the porosity, a green emission at about 550 nm was observed which may be ascribed to the defect-center luminescence of ZnS films, and the photoluminescence of ZnS/porous Si composites is very close to white light. Good crystal structures of the samples were observed by x-ray diffraction, showing that ZnS films were grown in preferred orientation. Due to the roughness of porous Si surface, some cracks appear in ZnS films, which could be seen from scanning electron microscope images.

  1. Abundance and distribution of Microdispus lambi (Acari: Microdispidae) in Spanish mushroom crops.

    Science.gov (United States)

    Navarro, María-Jesús; Gea, Francisco-José; Escudero-Colomar, L Adriana

    2010-04-01

    The myceliophagous mite Microdispus lambi has become a veritable plague since 1996, when it was first observed in Spanish mushroom crops, and is now causing substantial economic losses, particulary in spring and summer. This study looks at seasonal variation of the pest, its distribution on commercial farms and the population development during the crop cycle of the common white mushroom, Agaricus bisporus. Over a period of 18 months, 24 consecutive mushroom crop cycles were monitored and a total of 24 spawn and 960 substrate samples were analysed. We found that it is usually the substrates in the growing rooms that are infested, most commonly the compost. In many cases, the pest can be detected when the first 'flush'-i.e., mushroom growth surge, with weekly periodicity-is harvested, although damage does not become evident until the third flush. Mites were detected at the back of the mushroom growing room and, to a lesser extent, near the access door.

  2. MgB2 thin films on silicon nitride substrates prepared by an in situ method

    International Nuclear Information System (INIS)

    Monticone, Eugenio; Gandini, Claudio; Portesi, Chiara; Rajteri, Mauro; Bodoardo, Silvia; Penazzi, Nerino; Dellarocca, Valeria; Gonnelli, Renato S

    2004-01-01

    Large-area MgB 2 thin films were deposited on silicon nitride and sapphire substrates by co-deposition of Mg and B. After a post-annealing in Ar atmosphere at temperatures between 773 and 1173 K depending on the substrate, the films showed a critical temperature higher than 35 K with a transition width less than 0.5 K. The x-ray diffraction pattern suggested a c-axis preferential orientation in films deposited on amorphous substrate. The smooth surface and the good structural properties of these MgB 2 films allowed their reproducible patterning by a standard photolithographic process down to dimensions of the order of 10 μm and without a considerable degradation of the superconducting properties

  3. Preparation and structural properties of YBCO films grown on GaN/c-sapphire hexagonal substrate

    Energy Technology Data Exchange (ETDEWEB)

    Chromik, S., E-mail: stefan.chromik@savba.sk [Institute of Electrical Engineering, SAS, Dubravska cesta 9, 84104 Bratislava (Slovakia); Gierlowski, P. [Institute of Physics, Polish Academy of Sciences, Al. Lotnikow 32/46, 02-668 Warsaw (Poland); Spankova, M.; Dobrocka, E.; Vavra, I.; Strbik, V.; Lalinsky, T.; Sojkova, M. [Institute of Electrical Engineering, SAS, Dubravska cesta 9, 84104 Bratislava (Slovakia); Liday, J.; Vogrincic, P. [Department of Microelectronics, Slovak Technical University, Ilkovicova 3, 81219 Bratislava (Slovakia); Espinos, J.P. [Instituto de Ciencia de Materiales de Sevilla, Avda Americo Vespucio 49, 41092 Sevilla (Spain)

    2010-07-01

    Epitaxial YBCO thin films have been grown on hexagonal GaN/c-sapphire substrates using DC magnetron sputtering and pulsed laser deposition. An MgO buffer layer has been inserted between the substrate and the YBCO film as a diffusion barrier. X-ray diffraction analysis indicates a c-axis oriented growth of the YBCO films. {Phi}-scan shows surprisingly twelve maxima. Transmission electron microscopy analyses confirm an epitaxial growth of the YBCO blocks with a superposition of three a-b YBCO planes rotated by 120 deg. to each other. Auger electron spectroscopy and X-ray photoelectron spectroscopy reveal no surface contamination with Ga even if a maximum substrate temperature of 700 deg. C is applied.

  4. Process for depositing epitaxial alkaline earth oxide onto a substrate and structures prepared with the process

    Science.gov (United States)

    McKee, Rodney A.; Walker, Frederick J.

    1996-01-01

    A process and structure involving a silicon substrate utilize molecular beam epitaxy (MBE) and/or electron beam evaporation methods and an ultra-high vacuum facility to grow a layup of epitaxial alkaline earth oxide films upon the substrate surface. By selecting metal constituents for the oxides and in the appropriate proportions so that the lattice parameter of each oxide grown closely approximates that of the substrate or base layer upon which oxide is grown, lattice strain at the film/film or film/substrate interface of adjacent films is appreciably reduced or relieved. Moreover, by selecting constituents for the oxides so that the lattice parameters of the materials of adjacent oxide films either increase or decrease in size from one parameter to another parameter, a graded layup of films can be grown (with reduced strain levels therebetween) so that the outer film has a lattice parameter which closely approximates that of, and thus accomodates the epitaxial growth of, a pervoskite chosen to be grown upon the outer film.

  5. Electrical stimulation in white oyster mushroom (Pleurotus florida) production

    Science.gov (United States)

    Roshita, I.; Nurfazira, K. M. P.; Fern, C. Shi; Ain, M. S. Nur

    2017-09-01

    White oyster mushroom (Pleurotus florida) is an edible mushroom that gained popularity due to its nutritional values, low production cost and ease of cultivation. There are several research reported on the mushroom fruiting bodies which were actively developed when applying electrical shock treatment. This study was aimed to investigate the effects of different electrical voltages on the growth and yield of white oyster mushroom (Pleurotus florida). Five different electrical voltages had been applied during spawning period which were 6V, 9V, 12V, 15V and mushroom bags without any treatment served as control. Treatment at 6V showed the highest rate for mycelium growth while 15V took the shortest time for fruiting body formation. However, no significant different (P>0.05) among all the treatments was observed for the time taken for the mycelium to fill-up the bag and pinhead emergence. The total fresh weight and percentage of biological efficiency for treatment at 9V showed higher values compared to control. Treatment at 9V also showed the largest pileus diameter and the most firm in the pileus texture. Meanwhile, treatment at 6V showed the highest a* value (redness). In addition, different electrical voltage treatments applied did not show any significant effect on substrate utilization efficiency, colour L* and b* values. In conclusion, among all the electrical treatments applied, 9V could be considered as the best treatment to enhance the yield of white oyster mushroom.

  6. Antimicrobial activity and mineral composition of shiitake mushrooms cultivated on agricultural waste

    Directory of Open Access Journals (Sweden)

    Kérley Braga Pereira Bento Casaril

    2011-10-01

    Full Text Available The antimicrobial activity and mineral composition of shiitake mushrooms were evaluated in four isolates of Lentinula edodes. Mushrooms were cultivated on artificial logs, based on eucalyptus sawdust enriched with 20% rice, wheat, or soybean bran, or combination of 10% of two of these supplements. The substrates were humidified with a 0.1% mate tea extract or water. Logs of Eucalyptus grandis were also used to cultivate the shiitake mushrooms. The antimicrobial activity of an aqueous extract, corresponding to 40 mg of mushroom dry matter, was in some cases, depending on the isolate, able to inhibit both Bacillus subtilis and Escherichia coli K-12, independent of substrate composition or the growth stage of the mushrooms. Nitrogen, phosphorus, potassium, magnesium and calcium concentrations varied according to the substrate on which the mushrooms were cultivated, being, generally, higher with cultivation on artificial rather than natural eucalyptus logs. It could be concluded that, in addition to the fungal isolate, substrate composition and, processing methods must be considered during the production of antimicrobial substance(s as well as in the mushroom nutritional composition.

  7. Preparation of SmBiO{sub 3} buffer layer on YSZ substrate by an improved chemical solution deposition route

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Xiaolei [Key Laboratory of Advanced Technologies of Materials (Ministry of Education of China), Superconductivity and New Energy R& D Center, Mail Stop 165#, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Pu, Minghua, E-mail: mhpu@home.swjtu.edu.cn [Key Laboratory of Advanced Technologies of Materials (Ministry of Education of China), Superconductivity and New Energy R& D Center, Mail Stop 165#, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Zhao, Yong [Key Laboratory of Advanced Technologies of Materials (Ministry of Education of China), Superconductivity and New Energy R& D Center, Mail Stop 165#, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, University of New South Wale, Sydney, NSW 2052 (Australia)

    2016-12-15

    Highlights: • The proper conditions for SBO growth are 794 °C for 60 min in flowing Ar gas, the temperature of epitaxial growth is relatively low. • The total time by SSD technique for organic solvent removing, salts decomposition and layer growth is not up to 2 h, which are much less than that needed for traditional CSD of over 10 h. • SBO layer on YSZ prepared by SSD technique are suitable for the growth of YBCO, The results may be the usable reference for continuous preparation of SBO buffer layer on IBAD-YSZ/Ni-based alloy tapes. - Abstract: A quick route for chemical solution deposition (CSD) has been developed to prepare SmBiO{sub 3} (SBO) layers on yttria stabilized zirconia (YSZ) substrates rapidly by using of solid state decomposition (SSD) technique. The proper conditions for volatilization of lactic acid, which as solvent in precursor coated layer, and SBO growth are 115°C for 30 min and 794°C for 60 min in flowing Ar gas. The coated layers are amorphous structure of mixture oxides and quasi-crystal structure of SBO before and after growth, respectively. The total time by this quick CSD route for organic solvent volatilization, salts decomposed and layer growth is not up to 2 h, which are much less than that needed for traditional CSD of over 10 h. SBO layer is directly epitaxial growth on YSZ substrate without any lattice rotation. SBO layer prepared by this quick route as well as that by traditional route are suitable for the growth of YBCO. The superconducting transition temperature and critical current density of the coated YBCO layer on SBO/YSZ obtained by this quick route are up to 90 K and 1.66 MA/cm{sup 2}. These results may be the usable reference for continuous preparation of SBO buffer layer on IBAD-YSZ/Ni-based alloy tapes.

  8. Preparation and Surface Analysis of PPY/SDBS Films on Aluminum Substrates

    Directory of Open Access Journals (Sweden)

    Lisete C. Scienza

    2001-09-01

    Full Text Available Polypyrrole films were generated on high purity aluminum substrates under anodic polarization from aqueous electrolytes comprised of pyrrole and sodium dodecylbenzene sulfonate. The methods employed to characterize the polymer films included scanning electron microscopy, Fourier-transform infrared and X-photoelectron spectroscopy and X-ray diffraction. PPY/SDBS films revealed nodular morphology with occasional appearing of "dendrites", high level of protonation, excess of counter-anions ([S]/[N] > [N+]/[N] and high degrees of disorder.

  9. Cultivation of mushroom ( Pleurotus ostreatus ) using corn cobs and ...

    African Journals Online (AJOL)

    An investigation was carried out on the cultivation of mushroom (Pleurotus ostreatus) using corn cobs and saw dust as the main substrates. Lignocellulosic wastes such as corn cobs and saw dust were packaged inside heat – resistant polythene bags and pasteurized before being seeded with 7.5% w/w millet spawn of ...

  10. Preparation and characterization of nanocrystalline ITO thin films on glass and clay substrates by ion-beam sputter deposition method

    International Nuclear Information System (INIS)

    Venkatachalam, S.; Nanjo, H.; Kawasaki, K.; Wakui, Y.; Hayashi, H.; Ebina, T.

    2011-01-01

    Nanocrystalline indium tin oxide (ITO) thin films were prepared on clay-1 (Clay-TPP-LP-SA), clay-2 (Clay-TPP-SA) and glass substrates using ion-beam sputter deposition method. X-ray diffraction (XRD) patterns showed that the as-deposited ITO films on both clay-1 and clay-2 substrates were a mixture of amorphous and polycrystalline. But the as-deposited ITO films on glass substrates were polycrystalline. The surface morphologies of as-deposited ITO/glass has smooth surface; in contrast, ITO/clay-1 has rough surface. The surface roughnesses of ITO thin films on glass and clay-1 substrate were calculated as 4.3 and 83 nm, respectively. From the AFM and SEM analyses, the particle sizes of nanocrystalline ITO for a film thickness of 712 nm were calculated as 19.5 and 20 nm, respectively. Optical study showed that the optical transmittance of ITO/clay-2 was higher than that of ITO/clay-1. The sheet resistances of as-deposited ITO/clay-1 and ITO/clay-2 were calculated as 76.0 and 63.0 Ω/□, respectively. The figure of merit value for as-deposited ITO/clay-2 (12.70 x 10 -3 /Ω) was also higher than that of ITO/clay-1 (9.6 x 10 -3 /Ω), respectively. The flexibilities of ITO/clay-1 and ITO/clay-2 were evaluated as 13 and 12 mm, respectively. However, the ITO-coated clay-2 substrate showed much better optical and electrical properties as well as flexibility as compared to clay-1.

  11. Mushroom cultivation, processing and value added products: a patent based review.

    Science.gov (United States)

    Singhal, Somya; Rasane, Prasad; Kaur, Sawinder; Garba, Umar; Singh, Jyoti; Raj, Nishant; Gupta, Neeru

    2018-06-03

    Edible mushrooms are an abundant source of carbohydrates, proteins, and multiple antioxidants and phytonutrients. This paper presents a general overview on the edible fungus describing the inventions made in the field of its cultivation, equipment and value added products. To understand and review the innovations and nutraceutical benefits of mushrooms as well as to develop interest regarding the edible mushrooms. Information provided in this review is based on the available research investigations and patents. Mushrooms are an edible source of a wide variety of antioxidants and phytonutrients with a number of nutraceutical properties including anti-tumor and anti-carcinogenic. Thus, several investigations are made for cultivation and improvement of the yield of mushrooms through improvisation of growth substrates and equipment used for mushroom processing. The mushroom has been processed into various products to increase its consumption, providing the health and nutritional benefit to mankind. This paper summarizes the cultivation practices of mushroom, its processing equipments, methods of preservation, value added based products, and its nutraceutical properties. The review also highlights the various scientific feats achieved in terms of patents and research publications promoting mushroom as a wholesome food. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  12. Comparison of mushroom yield for Pleurotus Sajor Caju and Pleurotus Florida in different number of flushes

    International Nuclear Information System (INIS)

    Rosnani Abdul Rashid; Mat Rasol Awang; Hassan Hamdani Hassan Mutaat; Meswan Maskom

    2006-01-01

    This paper aimed at comparing the mushroom yield of Pleurotus sajor caju and Pleurotus florida which was harvested in five flushes. The γ-irradiated empty fruit bunch (EFB) at 25kGy was used as cultivation substrate. About 1 to 2% liquid seed of P. sajor caju and P. florida was inoculated into cultivation substrate. After 30 days, the inoculated substrate was opened for fruiting. For both species, the maximum mushroom yield was obtained in first flush and the lowest yield from the fifth flush. This show the mushroom yield is affected by number of flush. From analysis, the mushroom yield of P. florida was much better compared to P. sajor caju for all flushes. (Author)

  13. Forage collection, substrate preparation, and diet composition in fungus-growing ants

    DEFF Research Database (Denmark)

    Licht, H.H.D.; Boomsma, J.J.

    2010-01-01

    , whereas most of the other attine species use dry and partly degraded plant material such as leaf litter and caterpillar frass, but systematic comparative studies of actual resource acquisition across the attine ants have not been done. 3. Here we review 179 literature records of diet composition across...... the extant genera of fungus-growing ants. The records confirm the dependence of leaf-cutting ants on fresh vegetation but find that flowers, dry plant debris, seeds (husks), and insect frass are used by all genera, whereas other substrates such as nectar and insect carcasses are only used by some. 4. Diet...

  14. TiO2 based photo-catalysts prepared by chemical vapor infiltration (CVI) on micro-fibrous substrates

    International Nuclear Information System (INIS)

    Sarantopoulos, Ch.

    2007-10-01

    This thesis deals with micro-fibrous glass substrates functionalized with TiO 2 . The oxide is deposited as a thin film onto the micro fibres by chemical vapour infiltration (CVI), yielding a photo-catalytic material usable for cleaning polluted air. We studied the relation between the structure of the material and its photo-catalytic efficiency. TiO 2 thin films were prepared at low pressure, in a hot-wall CVD reactor, using Ti(O-iPr) 4 as a precursor. They were characterized by XRD, SEM, EDX, XPS and BET, and by recording the kinetics of decomposition of varied pollutants in solution (orange G, malic acid, imazapyr) and in air (toluene). The conditions favoring the growth of porous films through a columnar growth mode were established by MOCVD-depositing TiO 2 thin films on flat substrates. The subsequent works with micro fibrous thick substrates showed the uniformity of infiltration to be the main factor governing the photo-catalytic efficiency. Operating parameters that optimize infiltration do not yield columnar growth mode. A compromise is necessary. Our photo-catalysts are showing high efficiency comparable, if not higher, to those actually commercialized. These promising results are opening real perspectives for the proposed process. (author)

  15. Chitooligomers preparation by chitosanase produced under solid state fermentation using shrimp by-products as substrate.

    Science.gov (United States)

    Nidheesh, T; Pal, Gaurav Kumar; Suresh, P V

    2015-05-05

    Solid state fermentation (SSF) conditions were statistically optimized for the production of chitosanase by Purpureocillium lilacinum CFRNT12 using shrimp by-products as substrate. Central composite design and response surface methodology were applied to evaluate the effect of variables and their optimization. Incubation temperature, incubation time, concentration of inoculum and yeast extract were found to influence the chitosanase production significantly. The R(2) value of 0.94 indicates the aptness of the model. The level of variables for optimal production of chitosanase was 32 ± 1°C temperature, 96 h incubation, 10.5% (w/v) inoculum, 1.05% (w/w) yeast extract and 65% (w/w) moisture content. The chitosanase production was found to increase from 2.34 ± 0.07 to 41.78 ± 0.73 units/g initial dry substrate after optimization. The crude chitosanase produced 4.43 mM of chitooligomers as exclusive end product from colloidal chitosan hydrolysis. These results indicate the potential of P. lilacinum CFRNT12 for the chitosanase production employing cost effective SSF using shrimp by-products. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Sol-gel prepared B2O3-SiO2 thin films for protection of copper substrates

    International Nuclear Information System (INIS)

    Gouda, M.; Ahmed, M.S.; Shahin, M.A.

    2000-01-01

    Full text.Borosilicate coating has potential for applications in the field of electronics, e.g., as passivation layers. One of the main difficulties for applying these films by the conventional melting process is the extensive volatilization of B 2 O 3 from the melt. In this work transparent borosilicate films of 2OB 2 O3.8OSiO 2 (in mole %). Prepared by the sole gel method, were applied onto copper substrates by dip-coating technique. The transparency of these films was very sensitive to the humidity of the atmosphere during the coating process. Transparent films were obtained below 20% relative humidity at 20 celsius degree. High temperature oxidation tests, at about 585 celsius degree stream of air, showed that the sol-gel prepared 2OB 2 O 3 .8OSiO 2 thin films are protective coating for copper substrates under fairly severe temperature gradient and oxidizing atmosphere. It was found that the protective action of these films depends on the film thickness

  17. Preparation of Stable Superhydrophobic Coatings on Wood Substrate Surfaces via Mussel-Inspired Polydopamine and Electroless Deposition Methods

    Directory of Open Access Journals (Sweden)

    Kaili Wang

    2017-06-01

    Full Text Available Mussel-inspired polydopamine (PDA chemistry and electroless deposition approaches were used to prepare stable superhydrophobic coatings on wood surfaces. The as-formed PDA coating on a wood surface exhibited a hierarchical micro/nano roughness structure, and functioned as an “adhesive layer” between the substrate and a metallic film by the metal chelating ability of the catechol moieties on PDA, allowing for the formation of a well-developed micro/nanostructure hierarchical roughness. Additionally, the coating acted as a stable bridge between the substrate and hydrophobic groups. The morphology and chemical components of the prepared superhydrophobic wood surfaces were characterized by scanning electron microscopy (SEM, Fourier transform infrared (FT-IR spectroscopy, and X-ray photoelectron spectroscopy (XPS. The PDA and octadecylamine (OA modified surface showed excellent superhydrophobicity with a water contact angle (CA of about 153° and a rolling angle (RA of about 9°. The CA further increased to about 157° and RA reduced to about 5° with the Cu metallization. The superhydrophobic material exhibited outstanding stability in harsh conditions including ultraviolet aging, ultrasonic washing, strong acid-base and organic solvent immersion, and high-temperature water boiling. The results suggested that the PDA/OA layers were good enough to confer robust, degradation-resistant superhydrophobicity on wood substrates. The Cu metallization was likely unnecessary to provide significant improvements in superhydrophobic property. However, due to the amazing adhesive capacity of PDA, the electroless deposition technique may allow for a wide range of potential applications in biomimetic materials.

  18. Unraveling the mystery of commercial cultivation of Agaricus bisporus : plant biomass utilization and its effect on mushroom production

    NARCIS (Netherlands)

    Patyshakuliyeva, A.

    2015-01-01

    Agaricus bisporus, the white button mushroom, is economically the most important mushroom cultivated worldwide. Growth of A. bisporus needs a substrate produced by the composting of animal manure, wheat straw, gypsum, water and different additives. Therefore lignocellulose which is a complex mixture

  19. Transparent conductive ITO/Cu/ITO films prepared on flexible substrates at room temperature

    International Nuclear Information System (INIS)

    Ding Xingwei; Yan Jinliang; Li Ting; Zhang Liying

    2012-01-01

    Transparent conductive ITO/Cu/ITO films were deposited on PET substrates by magnetron sputtering using three cathodes at room temperature. Effects of the SiO 2 buffer layer and thickness of Cu interlayer on the structural, electrical and optical properties of ITO/Cu/ITO films were investigated. The optical transmittance was affected slightly by SiO 2 buffer layer, but the electrical properties of ITO/Cu/ITO films were improved. The transmittance and resistivity of the SiO 2 /ITO/Cu/ITO films decrease as the Cu layer thickness increases. The ITO/Cu/ITO film with 5 nm Cu interlayer deposited on the 40 nm thick SiO 2 buffer layer exhibits the sheet resistance of 143 Ω/sq and transmittance of 65% at 550 nm wavelength. The optical and electrical properties of the ITO/Cu/ITO films were mainly dependent on the Cu layer.

  20. Growth of CNTs on Fe-Si catalyst prepared on Si and Al coated Si substrates

    International Nuclear Information System (INIS)

    Teng, F-Y; Ting, J-M; Sharma, Sahendra P; Liao, Kun-Hou

    2008-01-01

    In this paper we report the effect of Al interlayers on the growth characteristics of carbon nanotubes (CNTs) using as-deposited and plasma etched Fe-Si catalyst films as the catalysts. Al interlayers having various thicknesses ranging from 2 to 42 nm were deposited on Si substrates prior to the deposition of Fe-Si catalysts. It was found that the Al interlayer diffuses into the Fe-Si catalyst during the plasma etching prior to the CNT growth, leading to the swelling and amorphization of the catalyst. This allows enhanced carbon diffusion in the catalyst and therefore a faster growth rate of the resulting CNTs. It was also found that use of an Al interlayer having a thickness of ∼3 ± 1 nm is most effective. Due to the effectiveness of this, the normally required catalyst etching is no longer needed for the growth of CNTs

  1. Growth of CNTs on Fe-Si catalyst prepared on Si and Al coated Si substrates.

    Science.gov (United States)

    Teng, F-Y; Ting, Jyh-Ming; Sharma, Sahendra P; Liao, Kun-Hou

    2008-03-05

    In this paper we report the effect of Al interlayers on the growth characteristics of carbon nanotubes (CNTs) using as-deposited and plasma etched Fe-Si catalyst films as the catalysts. Al interlayers having various thicknesses ranging from 2 to 42 nm were deposited on Si substrates prior to the deposition of Fe-Si catalysts. It was found that the Al interlayer diffuses into the Fe-Si catalyst during the plasma etching prior to the CNT growth, leading to the swelling and amorphization of the catalyst. This allows enhanced carbon diffusion in the catalyst and therefore a faster growth rate of the resulting CNTs. It was also found that use of an Al interlayer having a thickness of ∼3 ± 1 nm is most effective. Due to the effectiveness of this, the normally required catalyst etching is no longer needed for the growth of CNTs.

  2. Transparent conductive ITO/Cu/ITO films prepared on flexible substrates at room temperature

    Science.gov (United States)

    Ding, Xingwei; Yan, Jinliang; Li, Ting; Zhang, Liying

    2012-01-01

    Transparent conductive ITO/Cu/ITO films were deposited on PET substrates by magnetron sputtering using three cathodes at room temperature. Effects of the SiO2 buffer layer and thickness of Cu interlayer on the structural, electrical and optical properties of ITO/Cu/ITO films were investigated. The optical transmittance was affected slightly by SiO2 buffer layer, but the electrical properties of ITO/Cu/ITO films were improved. The transmittance and resistivity of the SiO2/ITO/Cu/ITO films decrease as the Cu layer thickness increases. The ITO/Cu/ITO film with 5 nm Cu interlayer deposited on the 40 nm thick SiO2 buffer layer exhibits the sheet resistance of 143 Ω/sq and transmittance of 65% at 550 nm wavelength. The optical and electrical properties of the ITO/Cu/ITO films were mainly dependent on the Cu layer.

  3. Characterization of barium strontium titanate thin films on sapphire substrate prepared via RF magnetron sputtering system

    Science.gov (United States)

    Jamaluddin, F. W.; Khalid, M. F. Abdul; Mamat, M. H.; Zoolfakar, A. S.; Zulkefle, M. A.; Rusop, M.; Awang, Z.

    2018-05-01

    Barium Strontium Titanate (Ba0.5Sr0.5TiO3) is known to have a high dielectric constant and low loss at microwave frequencies. These unique features are useful for many electronic applications. This paper focuses on material characterization of BST thin films deposited on sapphire substrate by RF magnetron sputtering system. The sample was then annealed at 900 °C for two hours. Several methods were used to characterize the structural properties of the material such as X-ray diffraction (XRD) and atomic force microscopy (AFM). Field emission scanning electron microscopy (FESEM) was used to analyze the surface morphology of the thin film. From the results obtained, it can be shown that the annealed sample had a rougher surface and better crystallinity as compared to as-deposited sample.

  4. Preparation and characterization of electrochemically deposited carbon nitride films on silicon substrate

    International Nuclear Information System (INIS)

    Yan Xingbin; Xu Tao; Chen Gang; Yang Shengrong; Liu Huiwen; Xue Qunji

    2004-01-01

    Carbon nitride films (CN x films) were deposited on Si(100) substrates by the electrolysis of methanol-urea solution at high voltage, atmospheric pressure, and low temperature. The microstructure and morphology of the resulting CN x films were analysed by means of Raman spectroscopy, x-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectrometry (FTIR), x-ray diffraction (XRD), and atomic force microscopy. The tribological properties of the CN x films were examined on an UMT-2MT friction and wear test rig. The Raman spectrum showed two characteristic bands: a graphite G band and a disordered D band of carbon, which suggested the presence of an amorphous carbon matrix. XPS and FTIR measurements suggested the existence of both single and double carbon-nitride bonds in the film and the hydrogenation of the carbon nitride phase. The XRD spectrum showed various peaks of different d values, which could confirm the existence of the polycrystalline carbon nitride phase. The hydrogenated CN x films were compact and uniform, with a root mean square roughness of about 18 nm. The films showed excellent friction-reduction and wear-resistance, with the friction coefficient in the stable phase being about 0.08. In addition, the growth mechanism of the CN x films in liquid phase electro-deposition was discussed as well. It was assumed that the molecules of CH 3 OH and CO(NH 2 ) 2 were polarized under high electric field, and the CN x film was formed on the substrate through the reaction of the -CH 3 and -NH 2 groups on the cathode

  5. Porous niobium coatings fabricated with selective laser melting on titanium substrates: Preparation, characterization, and cell behavior

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Sheng [Science and Technology on Power Beam Processes Laboratory, Beijing Aeronautical Manufacturing Technology Research Institute (BAMTRI), Beijing 100024 (China); State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Cheng, Xian; Yao, Yao; Wei, Yehui [Department of Stomatology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan 430022 (China); Han, Changjun; Shi, Yusheng [State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Wei, Qingsong, E-mail: wqs_xn@163.com [State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Zhang, Zhen, E-mail: zhangzhentitanium@163.com [State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Department of Stomatology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan 430022 (China)

    2015-08-01

    Nb, an expensive and refractory element with good wear resistance and biocompatibility, is gaining more attention as a new metallic biomaterial. However, the high price of the raw material, as well as the high manufacturing costs because of Nb's strong oxygen affinity and high melting point have limited the widespread use of Nb and its compounds. To overcome these disadvantages, porous Nb coatings of various thicknesses were fabricated on Ti substrate via selective laser melting (SLM), which is a 3D printing technique that uses computer-controlled high-power laser to melt the metal. The morphology and microstructure of the porous Nb coatings, which had pores ranging from 15 to 50 μm in size, were characterized with scanning electron microscopy (SEM). The average hardness of the coating, which was measured with the linear intercept method, was 392 ± 37 HV. In vitro tests of the porous Nb coating which was monitored with SEM, immunofluorescence, and CCK-8 counts of cells, exhibited excellent cell morphology, attachment, and growth. The simulated body fluid test also proved the bioactivity of the Nb coating. Therefore, these new porous Nb coatings could potentially be used for enhanced early biological fixation to bone tissue. In addition, this study has shown that SLM technique could be used to fabricate coatings with individually tailored shapes and/or porosities from group IVB and VB biomedical metals and their alloys on stainless steel, Co–Cr, and other traditional biomedical materials without wasting raw materials. - Highlights: • Porous Nb coating was firstly fabricated on Ti substrate by SLM technique. • Morphology, microstructure and hardness of the coating were characterized. • In vitro test of the coating showed good cell attachment, morphology and growth.

  6. Porous niobium coatings fabricated with selective laser melting on titanium substrates: Preparation, characterization, and cell behavior

    International Nuclear Information System (INIS)

    Zhang, Sheng; Cheng, Xian; Yao, Yao; Wei, Yehui; Han, Changjun; Shi, Yusheng; Wei, Qingsong; Zhang, Zhen

    2015-01-01

    Nb, an expensive and refractory element with good wear resistance and biocompatibility, is gaining more attention as a new metallic biomaterial. However, the high price of the raw material, as well as the high manufacturing costs because of Nb's strong oxygen affinity and high melting point have limited the widespread use of Nb and its compounds. To overcome these disadvantages, porous Nb coatings of various thicknesses were fabricated on Ti substrate via selective laser melting (SLM), which is a 3D printing technique that uses computer-controlled high-power laser to melt the metal. The morphology and microstructure of the porous Nb coatings, which had pores ranging from 15 to 50 μm in size, were characterized with scanning electron microscopy (SEM). The average hardness of the coating, which was measured with the linear intercept method, was 392 ± 37 HV. In vitro tests of the porous Nb coating which was monitored with SEM, immunofluorescence, and CCK-8 counts of cells, exhibited excellent cell morphology, attachment, and growth. The simulated body fluid test also proved the bioactivity of the Nb coating. Therefore, these new porous Nb coatings could potentially be used for enhanced early biological fixation to bone tissue. In addition, this study has shown that SLM technique could be used to fabricate coatings with individually tailored shapes and/or porosities from group IVB and VB biomedical metals and their alloys on stainless steel, Co–Cr, and other traditional biomedical materials without wasting raw materials. - Highlights: • Porous Nb coating was firstly fabricated on Ti substrate by SLM technique. • Morphology, microstructure and hardness of the coating were characterized. • In vitro test of the coating showed good cell attachment, morphology and growth

  7. Semi-preparative scale purification of enterococcal bacteriocin enterocin EJ97, and evaluation of substrates for its production.

    Science.gov (United States)

    López, Rosario Lucas; García, Ma Teresa; Abriouel, Hikmate; Ben Omar, Nabil; Grande, Ma José; Martínez-Cañamero, Magdalena; Gálvez, Antonio

    2007-12-01

    The influence of substrate composition on the production of enterocin EJ97 and the conditions for semi-preparative bacteriocin recovery have been studied. Final bacteriocin concentrations of 12.5 or 15.6 mg/l were obtained in the commercial media brain heart infusion broth (BHI) and tryptic soya broth, respectively. The bacteriocin was also produced in the complex medium CM (8.75 mg/l), in which the vitamin supplement was essential for production. Some combinations of meat peptone and yeast extract plus either soy peptone or BHI also supported bacteriocin production, at concentrations of 6.25-7.5 mg/l. In cow milk (whole, half-skimmed, and skimmed), the final bacteriocin concentrations obtained ranged from 7.5 to 11.25 mg/l. Highest bacteriocin activity was obtained by using pasteurised milk whey as growth substrate (up to 25 mg/l), suggesting that this bacteriocin can be obtained on a large scale by using this cheap food-grade industrial by-product. Highest bacteriocin titres were always obtained after 8 h of incubation at 37 degrees C. Semi-preparative concentration and purification of enterocin EJ97 produced in a complex medium was achieved by bulk cation exchange chromatography without previous cell separation, followed by reversed-phase chromatography. This two-step procedure allowed preparation of milligram quantities of purified bacteriocin, which is an improvement compared to purification procedures established for most other bacteriocins (35). The availability of purified enterocin EJ97 will facilitate other studies such as the elucidation of its molecular structure and its interaction with target bacteria.

  8. INFLUENCE OF TEMPERATURE AND RELATIVE HUMIDITY ON THE STUDDED AGARICUS BLAZEI MURRILL MUSHROOM COMPOST

    Directory of Open Access Journals (Sweden)

    Sándor Rózsa

    2017-12-01

    Full Text Available Almond mushroom, Agaricus blazei Murrill, is the so-called secondary saprophyte, developing on partially processed substrate, in which microorganisms reduced complex ligno-cellulose compounds. Numerous authors have shown that due to the similar life cycle in the cultivation of almond mushroom technologies developed for white button mushroom may be applied. However, almond mushroom requires high temperature and high humidity as well as access to light to form fruiting bodies. In Brazil, due to the advantageous climatic conditions this species is frequently grown outdoors; however, in other countries - mainly due to its high temperature requirements - such cultivation system is risky and may only be successful during very warm summers. In this study, we analyzed four kind of compost studded by Agaricus blazei Murrill mushroom mycelium. We recorded every hour the air and compost temperature and the air relative humidity. The best studded compost was the classical, followed by synthetic and then by the mixt compost.

  9. The medicinal Agaricus mushroom cultivated in Brazil: biology, cultivation and non-medicinal valorisation.

    Science.gov (United States)

    Largeteau, Michèle L; Llarena-Hernández, Régulo Carlos; Regnault-Roger, Catherine; Savoie, Jean-Michel

    2011-12-01

    Sun mushroom is a cultivated mushroom extensively studied for its medicinal properties for several years and literature abounds on the topic. Besides, agronomical aspects were investigated in Brazil, the country the mushroom comes from, and some studies focus on the biology of the fungus. This review aimed to present an overview of the non-medicinal knowledge on the mushroom. Areas of commercial production and marketing trends are presented. Its specific fragrance, taste, nutritional value and potential use of extracts as food additives are compared to those of the most cultivated fungi and laboratory models. The interest of the mushroom for lignocellulosic enzyme production and source of biomolecules for the control of plant pathogens are shown. Investigation of genetic variability among cultivars is reported. Growing and storage of mycelium, as well as cultivation conditions (substrate and casing generally based on local products; indoor and outdoor cultivation; diseases and disorders) are described and compared to knowledge on Agaricus bisporus.

  10. Preparation of Supercapacitors on Flexible Substrates with Electrodeposited PEDOT/Graphene Composites.

    Science.gov (United States)

    Lehtimäki, Suvi; Suominen, Milla; Damlin, Pia; Tuukkanen, Sampo; Kvarnström, Carita; Lupo, Donald

    2015-10-14

    Composite films consisting of poly(3,4-ethylenedioxythiophene) (PEDOT) and graphene oxide (GO) were electrochemically polymerized by electrooxidation of EDOT in ionic liquid (BMIMBF4) onto flexible electrode substrates. Two polymerization approaches were compared, and the cyclic voltammetry (CV) method was found to be superior to potentiostatic polymerization for the growth of PEDOT/GO films. After deposition, incorporated GO was reduced to rGO by a rapid electrochemical method of repetitive cathodic potential cycling, without using any reducing reagents. The films were characterized in 3-electrode configuration in BMIMBF4. Symmetric supercapacitors with aqueous electrolyte were assembled from the composite films and characterized through cyclic voltammetry and galvanostatic discharge tests. It was shown that PEDOT/rGO composites have better capacitive properties than pure PEDOT or the unreduced composite film. The cycling stability of the supercapacitors was also tested, and the results indicate that the specific capacitance still retains well over 90% of the initial value after 2000 consecutive charging/discharging cycles. The supercapacitors were demonstrated as energy storages in a room light energy harvester with a printed organic solar cell and printed electrochromic display. The results are promising for the development of energy-autonomous, low-power, and disposable electronics.

  11. Characteristics of AZO thin films prepared at various Al target input current deposited on PET substrate

    Science.gov (United States)

    Kim, Yun-Hae; Park, Chang-Wook; Lee, Jin-Woo; Lee, Dong Myung

    2015-03-01

    Transparent conductive oxide is a thin film to be used in numerous applications throughout the industry in general. Transparent electrode materials used in these industries are in need of light transmittance with excellent high and low electrical characteristics, substances showing the most excellent physical properties while satisfying all the characteristics such as indium tin oxide film. However, reserves of indium are very small, there is an environmental pollution problem. So the study of zinc oxide (ZnO) is actively carried out in an alternative material. This study analyzed the characteristics by using a direct current (DC) magnetron sputtering system. The electric and optical properties of these films were studied by Hall measurement and optical spectroscopy, respectively. When the Al target input current is 2 mA and 4 mA, it demonstrates about 80% transmittance in the range of the visible spectrum. Also, when Al target input current was 6 mA, sheet resistance was the smallest on PET substrate. The minimum resistivity is 3.96×10-3 ohm/sq.

  12. 菌糠与奶牛常用粗饲料瘤胃降解特性的对比研究%Comparison of Rumen Degradation Characteristics between Spent Mushroom Substrate and Commonly Used Roughages for Dairy Cows

    Institute of Scientific and Technical Information of China (English)

    宫福臣; 韩梅琳; 杨琼; 李杰; 孙晓红

    2013-01-01

    为了系统研究菌糠用作反刍动物饲料的饲用价值,选用3只安装永久性瘤胃瘘管的荷斯坦奶牛为试验动物,采用3×3拉丁方设计,通过尼龙袋法对菌糠、羊草、玉米秸的干物质(DM)、粗蛋白质(CP)、中性洗涤纤维(NDF)和酸性洗涤纤维(ADF)的瘤胃降解率进行测定.粗饲料样品在瘤胃中的培养时间分别为0、6、12、24、36、48、72 h.结果表明:3种粗饲料72 h的DM降解率差异不显著(P>0.05),而其有效降解率由高到低依次为菌糠(29.33%)、羊草(27.41%)、玉米秸(23.39%),且前两者显著高于玉米秸(P<0.05).72 h的CP降解率及其有效降解率以羊草最高,菌糠次之,二者与玉米秸之间差异显著(P<0.05).玉米秸72 h的NDF降解率虽高于羊草和菌糠(P<0.05),但3种粗饲料的有效降解率均较低,由高到低依次为玉米秸(26.12%)、菌糠(25.72%)、羊草(23.73%),无显著差异(P>0.05).而72 h的ADF降解率和有效降解率由高到低也依次为玉米秸(25.36%)、菌糠(24.23%)、羊草(21.83%),变化趋势和差异性与NDF降解规律相一致.由此可见,从3种粗饲料在奶牛瘤胃的消化特性来看,本试验中菌糠的饲用价值与羊草接近,优于玉米秸,因此菌糠作为新型反刍动物粗饲料资源切实可行.%The aim of this study was to evaluate the rumen degradation characteristics of spent mushroom substrate (SMS) as a type of roughage for ruminants.Three Holstein cows with ruminal cannulas were assigned to 3 treatments in a 3 × 3 Latin square design,and the rumen degradation rates of dry matter (DM),crude protein (CP),neutral detergent fiber (NDF) and acid detergent fiber (ADF) of Chinese wildrye (CW),corn stover (CS) and SMS were measured using nylon bag method.The culture time of roughages in the rumen was 0,6,12,24,36,48 and 72 h,respectively.The results showed that there were no differences in DM degradation rate among roughages at 72 h,the effective degradability

  13. Global collection of mushroom pathogens

    NARCIS (Netherlands)

    Baars, J.J.P.; Hendrickx, P.M.; Sonnenberg, A.S.M.; Korsten, L.

    2013-01-01

    In many places in the world, increasingly less chemical crop protection agents are available for use in mushroom cultivation. As a consequence, mushroom cultivation will loose the ability to use crop protection agents. As a consequence, good hygiene management, early detection and monitoring of

  14. Methodology and technological aspects of the flexible substrate preparation for ink-jet printing technology

    Science.gov (United States)

    Tarapata, Grzegorz; Marzecki, Michał

    2013-10-01

    The ink-jet printing technology becomes especially promising for wide volume of production of cheap sensors, consumable electronics and other dedicated applications of everyday life like smart packaging, smart textiles, smart labels, etc. To achieve this goal new materials compatible with ink-jet printing should be developed. Currently on the market there is a growing number of inks with different properties, but their use requires many tests related to its printability and their interaction with other materials. The paper presents technological problems that are encountered by people associated with fabrication of various devices with using of inkjet printing techniques. Results presented in the paper show the influence of surface preparation techniques on the quality of achieved shapes, the impact of other materials already deposited and the impact of another external factors. During carried out experiments the printer Dimatix DMP 2831 and several inks base on nanosilver or dielectric UV curable was used.

  15. Porous niobium coatings fabricated with selective laser melting on titanium substrates: Preparation, characterization, and cell behavior.

    Science.gov (United States)

    Zhang, Sheng; Cheng, Xian; Yao, Yao; Wei, Yehui; Han, Changjun; Shi, Yusheng; Wei, Qingsong; Zhang, Zhen

    2015-08-01

    Nb, an expensive and refractory element with good wear resistance and biocompatibility, is gaining more attention as a new metallic biomaterial. However, the high price of the raw material, as well as the high manufacturing costs because of Nb's strong oxygen affinity and high melting point have limited the widespread use of Nb and its compounds. To overcome these disadvantages, porous Nb coatings of various thicknesses were fabricated on Ti substrate via selective laser melting (SLM), which is a 3D printing technique that uses computer-controlled high-power laser to melt the metal. The morphology and microstructure of the porous Nb coatings, which had pores ranging from 15 to 50 μm in size, were characterized with scanning electron microscopy (SEM). The average hardness of the coating, which was measured with the linear intercept method, was 392±37 HV. In vitro tests of the porous Nb coating which was monitored with SEM, immunofluorescence, and CCK-8 counts of cells, exhibited excellent cell morphology, attachment, and growth. The simulated body fluid test also proved the bioactivity of the Nb coating. Therefore, these new porous Nb coatings could potentially be used for enhanced early biological fixation to bone tissue. In addition, this study has shown that SLM technique could be used to fabricate coatings with individually tailored shapes and/or porosities from group IVB and VB biomedical metals and their alloys on stainless steel, Co-Cr, and other traditional biomedical materials without wasting raw materials. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. In-situ preparation of Fe2O3 hierarchical arrays on stainless steel substrate for high efficient catalysis

    International Nuclear Information System (INIS)

    Yang, Zeheng; Wang, Kun; Shao, Zongming; Tian, Yuan; Chen, Gongde; Wang, Kai; Chen, Zhangxian; Dou, Yan; Zhang, Weixin

    2017-01-01

    Hierarchical array catalysts with micro/nano structures on substrates not only possess high reactivity from large surface area and suitable interface, but intensify mass transfer through shortening the diffusion paths of both reactants and products for high catalytic efficiency. Herein, we first demonstrate fabrication of Fe 2 O 3 hierarchical arrays grown on stainless-steel substrates via in-situ hydrothermal chemical oxidation followed by heat treatment in N 2 atmosphere. As a Fenton-like catalyst, Fe 2 O 3 hierarchical arrays exhibit excellent catalytic activity and life cycle performance for methylene blue (MB) dye degradation in aqueous solution in the presence of H 2 O 2 . The Fe 2 O 3 catalyst with unique hierarchical structures and efficient transport channels, effectively activates H 2 O 2 to generate large quantity of • OH radicals and highly promotes reaction kinetics between MB and • OH radicals. Immobilization of hierarchical array catalysts on stainless-steel can prevent particles agglomeration, facilitate the recovery and reuse of the catalysts, which is expected promising applications in wastewater remediation. - Graphical abstract: The in-situ synthesis of Fe 2 O 3 hierarchical arrays on stainless-steel substrates was reported for the first time, which exhibit excellent catalytic activity performance for methylene blue (MB) dye degradation in aqueous solution in the presence of H 2 O 2 . - Highlights: • Fe 2 O 3 hierarchical arrays was prepared by in-situ hydrothermal chemical oxidation. • F − ions play an important role in the formation of the Fe 2 O 3 hierarchical arrays. • Fe 2 O 3 hierarchical arrays show high catalytic activity to methylene blue degradation.

  17. Nucleation sites of Ge nanoislands grown on pit-patterned Si substrate prepared by electron-beam lithography

    Science.gov (United States)

    Smagina, Zh. V.; Zinovyev, V. A.; Rudin, S. A.; Novikov, P. L.; Rodyakina, E. E.; Dvurechenskii, A. V.

    2018-04-01

    Regular pit-patterned Si(001) substrates were prepared by electron-beam lithography followed by plasma chemical etching. The geometry of the pits was controlled by varying the etching conditions and the electron-beam exposure duration. It was shown that the location of three-dimensional (3D) Ge nanoislands subsequently grown on the pit-patterned Si substrates depends on the shape of the pit bottom. In the case of pits having a sharp bottom, 3D Ge islands nucleate inside the pits. For pits with a wide flat bottom, the 3D Ge island nucleation takes place at the pit periphery. This effect is attributed to the strain relaxation depending not only on the initial pit shape, but also on its evolution during the Ge wetting layer deposition. It was shown by Monte Carlo simulations that in the case of a pit with a pointed bottom, the relaxation is most effective inside the pit, while for a pit with a wide bottom, the most relaxed area migrates during Ge deposition from the pit bottom to its edges, where 3D Ge islands nucleate.

  18. Novel transparent high-performance AgNWs/ZnO electrodes prepared on unconventional substrates with 3D structured surfaces

    Science.gov (United States)

    Lan, Wei; Yang, Zhiwei; Zhang, Yue; Wei, Yupeng; Wang, Pengxiang; Abas, Asim; Tang, Guomei; Zhang, Xuetao; Wang, Junya; Xie, Erqing

    2018-03-01

    With the development of optoelectronic devices with three-dimensional (3D) structured surfaces, transparent electrodes that can be deposited on non-plane substrates have become increasingly important. In this paper, novel transparent silver nanowire (AgNWs)/ZnO film electrodes were uniformly prepared on treated 3D glass and PET substrates with a combination of spin-coating and heat-welding. The AgNWs/ZnO films show a transmittance of ∼88% and a sheet resistance of ∼10 Ω/sq. They are comparable with commercial ITO films. Furthermore, only a small in-plane resistance variation of ∼1 Ω/sq was measured using four-point probe mapping in films with a 10 cm × 10 cm area. These results confirm that these novel film electrodes are very uniform. Both electrical resistance and optical transmittance of the films remain mostly intact after 1000 bending cycles and tape peeling-tests with 10 cycles. The films show high thermal stability for more than one month at 80 °C. The strategy provides a new route for the design and fabrication of optoelectronic devices with 3D structured surfaces.

  19. Preparation and characterization of Ge2Sb2Te5 phase change films on elastic substrates by pulsed laser deposition

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Hongbing; Thelander, Erik; Benke, Julia; Rauschenbach, Bernd [Leibniz Institute of Surface Modification, 04318 Leipzig (Germany)

    2012-07-01

    Ge{sub 2}Sb{sub 2}Te{sub 5} (GST) thin films have attracted a great deal of interest as an active layer for data storage media due to its high switching rate and extremely good reversibility. Here we demonstrate the preparation of high-quality GST films on elastic polyimide substrates by pulsed laser deposition (PLD). The composition and chemical state of the films were investigated by energy dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS), respectively. The effect of annealing temperature on the crystalline nature of the films was also studied. As-deposited films were found to be amorphous. Crystalline phases with face-centered cubic and hexagonal structures appeared at 180 and 300 degrees, respectively. Importantly, no phase separation could be seen in the annealed films. Furthermore, reflectivity measurements were performed to characterize the as-deposited and annealed films, showing a high reflectivity contrast (up to 23%) between full crystalline and amorphous films. Our results indicate that PLD deposited GST film on polyimide substrate is a promising candidate for use in future flexible memory devices.

  20. Carbon black nanoparticles film electrode prepared by using substrate-induced deposition approach

    Energy Technology Data Exchange (ETDEWEB)

    Svegl, Irena Grabec; Bele, Marjan [National Institute of Chemistry, P.O. Box 660, SI-1001 Ljubljana (Slovenia); Ogorevc, Bozidar [National Institute of Chemistry, P.O. Box 660, SI-1001 Ljubljana (Slovenia)], E-mail: bogorevc@ki.si

    2008-11-03

    A new type of carbon film electrode, composed of a thin layer of tightly packed carbon black (CB) nanoparticles deposited onto a gelatin-covered indium tin oxide/glass support using the surface-induced deposition (SID) approach, is presented. Some parameters of the novel SID method were optimized and the surface image and functionalization of the investigated carbon black film electrode (CBFE) was inspected by employing scanning electron microscopy and infrared spectroscopy. A cyclic voltammetry (CV) study was conducted in which the electron-transfer kinetics and CBFE interfacial characteristics were evaluated employing several selected reference redox systems, such as [Ru(NH{sub 3}){sub 6}]{sup 3+/2+}, [Fe(CN){sub 6}]{sup 3-/4-} and Fe{sup 3+/2+} in aqueous, and ferrocene/ferrocenium in acetonitrile media. CV recordings were also performed in order to compare the electrochemical behavior of the CBFE with that of some well-known and established bare carbon-based electrodes. In order to confirm the validity of the CB film preparation method, the electroanalytical performance of the proposed CBFE was examined by carrying out linear sweep voltammetry of ascorbic acid (AA), anodic stripping square-wave voltammetry of Cu(II) in acidic medium, and amperometric measurements of hydrogen peroxide under flow injection conditions. The sensing characteristics of the novel carbon film electrode, demonstrated in this preliminary study, comprise: (i) a wide working potential window ranging from +1.0 to -1.3 V (depending on the solution pH), (ii) a wide applicable pH range (at least from 2 to 12), (iii) low voltammetric background (<5 {mu}A cm{sup -2}), (iv) a satisfactory linear voltammetric and amperometric response (r{sup 2} > 0.99) to various analytes, (v) good reproducibility (for example, r.s.d. of 2% in amperometric detection of H{sub 2}O{sub 2} and r.s.d. of 8.5% for electrode-to-electrode CV runs), and (vi) stable and fast current response (at least 100 CV runs with

  1. Biochemical and microstructural Ccharacteristics of insoluble and soluble dietary fiber prepared from mushroom sclerotia of Pleurotus tuber-regium, Polyporus rhinocerus, and Wolfiporia cocos.

    Science.gov (United States)

    Wong, Ka-Hing; Cheung, Peter C K; Wu, Jin-Zhong

    2003-11-19

    The proximate composition of sclerotia of Pleurotus tuber-regium, Polyporus rhinoceros, and Wolfiporia cocos, together with the yield, purity, monosaccharide profile, and microstructure of their insoluble dietary fiber (IDF) and soluble dietary fiber (SDF) fractions prepared from AOAC enzymatic-gravimetric methods were investigated and compared. All three sclerotia were typical carbohydrate rich sclerotia [ranging from 90.5 to 98.1% dry matter (DM)] with an exceptionally low amount of crude lipid content (ranging from 0.02 to 0.14% DM). Besides, all three sclerotia possessed substantial amounts of IDF (ranging from 77.4 to 94.6% DM) with notably high levels of nonstarch polysaccharides (NSP) (89.9-92.2% DM) in which glucose was the predominant sugar residue (90.6-97.2% of NSP DM). On the contrary, both the yield (only ranging from 1.45 to 2.50% DM) and the amount of NSP (ranging from 22.4 to 29.6% DM) of the three sclerotial SDF fractions were very low. Scanning electron micrographs showed fragments of interwoven hyphae and insoluble materials in the three sclerotial IDF fractions, but only an amorphous structure of soluble materials was observed in the SDF fractions. The potential use of these fiber preparations was discussed.

  2. Enrichment of mushrooms: an interesting strategy for the acquisition of lithium.

    Science.gov (United States)

    de Assunção, Laélia Soares; da Luz, José Maria Rodrigues; da Silva, Marliane de Cássia Soares; Vieira, Patrícia Aparecida Fontes; Bazzolli, Denise Mara Soares; Vanetti, Maria Cristina Dantas; Kasuya, Maria Catarina Megumi

    2012-09-15

    The capability of Pleurotus ostreatus mushroom to accumulate lithium (Li) and the accessibility of this Li compared with lithium carbonate (Li(2)CO(3)), often used as psychiatric medicine, were investigated. Mushrooms were produced on a substrate-based on coffee husk, with different added concentrations of lithium chloride (LiCl). Biological efficiency (BE), the crude protein content, the concentration of Li and other elements present in mushrooms were determined. The sequential extraction and in vitro test were used to verify the accessibility and the degree of solubility of this element. Li concentration in mushrooms was directly influenced by increasing LiCl concentration in the substrate (Plithium can be an alternative source of Li, as well as being a food with high nutritional value. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Disease control by chemical and biological fungicides in cultivated mushrooms: Button mushroom, oyster mushroom and shiitake

    OpenAIRE

    Potočnik, Ivana; Stepanović, Miloš; Rekanović, Emil; Todorović, Biljana; Milijašević-Marčić, Svetlana

    2015-01-01

    The most commonly cultivated basidiomycetes worldwide and in Serbia are button mushroom (Agaricus bisporus), oyster mushroom (Pleurotus sp.) and shiitake (Lentinus edodes). Production of their fruiting bodies is severely afflicted by fungal, bacterial, and viral pathogens that are able to cause diseases which affect yield and quality. Major A. bisporus fungal pathogens include Mycogone perniciosa, Lecanicillium fungicola, and Cladobotryum spp., the causal a...

  4. The merit of medicinal mushrooms from a pharmaceutical point of view.

    Science.gov (United States)

    Lindequist, Ulrike

    2013-01-01

    Whereas pharmaceuticals prepared by extraction of medicinal plants constitute an important part of evidence-based medicine also in the Western Hemisphere, medicinal mushrooms are mainly used as dietary supplements without declaration of a medical indication. Scientific investigations and case studies from Asian medicine show that fungi have very promising pharmacological potential. This article provides an overview of the principles of authorization and market access of herbal drugs in Europe, with special reference to Germany. The current status regarding mushrooms is reported, with an aim toward supporting the development of legalized pharmaceutical preparations of medicinal mushrooms in Europe.

  5. The cultivation of the mushroom Agaricus bisporus (Champignon): micro-organisms and preservability.

    Science.gov (United States)

    Zicari, Giuseppe; Rivetti, Daniela; Soardo, Vincenzo; Cerrato, Elena; Panata, Marisa

    2011-01-01

    Cultivation of Agaricus bisporus mushrooms requires the use of substrates that are potentially dangerous from the microbiological point of view, such as chicken and horse manure. Microorganisms can pose risks to consumers and workers, and generate lower profits. Packaging of fresh mushrooms with impermeable films is used to extend their shelf life but creates anaerobic and humidity conditions that could favour the growth of microorganisms such as Listeria monocytogenes and Clostridium botulinum. This paper examines some alternatives for packaging fresh mushrooms and the resulting potential microbiological hazards.

  6. The fungistatic activity of organic selenium and its application to the production of cultivated mushrooms Agaricus bisporus and Pleurotus spp.

    Directory of Open Access Journals (Sweden)

    Savic Milena

    2012-01-01

    Full Text Available The activity of organic selenium against pathogenic molds and its use as a potential selenium source in the production of enriched mushrooms were examined. The effect of commercial selenized yeast on mycelia growth was examined using a method with mycelia disks and a well diffusion method. For mushroom enrichment, different concentrations of selenium were added to a growth substrate. The results presented in this paper suggest that the most suitable concentration of selenized yeast that inhibits the growth of the mycopathogenic molds is 70-100 mg/kg of selenium. With the addition of this concentration to the substrate, mushroom fruit bodies will uptake a high level of selenium, about 100 μg/g for Pleurotus spp., and 200 μg/g for Agaricus bisporus in dry weight of the mushroom. Thereby a double effect in the cultivation of mushrooms is achieved. [Projekat Ministarstva nauke Republike Srbije, br. III 46010 and br. III46001

  7. Radioactive cesium in Finnish mushrooms

    International Nuclear Information System (INIS)

    Kostiainen, E.; Ylipieti, J.

    2010-02-01

    Surveillance of radioactive cesium in Finnish mushrooms was started in 1986 at STUK. Results of the surveillance programs carried out in Lapland and other parts of Finland are given in this report. More than 2000 samples of edible mushrooms have been analysed during 1986-2008. The 137 Cs detected in the mushrooms mainly originates from the 137 Cs deposition due to the accident at the Chernobyl nuclear power plant in 1986. The 137 Cs concentrations of mushrooms in the end of 1970s and in the beginning of 1980s varied from some ten to two hundred becquerels per kilogram originating from the nuclear weapon test period. The uneven division of the Chernobyl fallout is seen in the areal variation of 137 Cs concentrations of mushrooms, the 137 Cs concentrations being about tenfold in the areas with the highest deposition compared to those where the deposition was lowest. After the Chernobyl accident the maximum values in the 137 Cs concentrations were reached during 1987-88 among most species of mushrooms. The 137 Cs concentrations have decreased slowly, being in 2008 about 40 per cent of the maximum values. The 137 Cs concentrations may be tenfold in the mushroom species with high uptake of cesium (Rozites caperatus, Hygrophorus camarophyllus, Lactarius trivialis) compared to the species with low uptake (Albatrellus ovinus, Leccinum sp.) picked in the same area. The 137 Cs contents in certain species of commercial mushrooms in Finland still exceed the maximum permitted level, 600 Bq/kg, recommended to be respected when placing wild game, wild berries, wild mushrooms and lake fish on the market (Commission recommendation 2003/274/Euratom). Therefore, the 137 Cs concentrations of mushrooms should be measured before placing them on the market in the areas of the highest 137 Cs deposition, except for Albatrellus ovinus, Boletus sp. and Cantharellus cibarius. The 137 Cs concentrations of common commercial mushroom species, Cantharellus tubaeformis and Craterellus

  8. Preparation of SDC electrolyte thin films on dense and porous substrates by modified sol-gel route

    International Nuclear Information System (INIS)

    Lin Hongfei; Ding, Changsheng; Sato, Kazuhisa; Tsutai, Yoshifumi; Ohtaki, Hiromichi; Iguchi, Mabito; Wada, Chiharu; Hashida, Toshiyuki

    2008-01-01

    Nanocrystalline fluorite type samarium doped ceria (SDC) electrolyte thin film for intermediate temperature-solid oxide fuel cells (IT-SOFCs) application were prepared on the dense and porous substrates at low temperatures of 573-1373 K using a novel citrate sol-gel route combined with a sol suspension spray coating technique. Thermogravimetric analysis showed that the decomposition of the citrate gel film and the initial crystallization of the SDC occurred at a low temperature of about 590 K. XRD examination revealed that the annealing of the green film at temperatures of 573-1373 K provided cubic nanocrystalline SDC phase. The crystallite sizes were in the range of 9-19 nm. Microscopic observations indicated that the derived film was homogeneous, dense and crack-free without pinholes. The desired thickness for preparation of thin electrolyte films from hundreds of nm to several μm should be controllable and feasible by repeating the simple and inexpensive citrate sol-gel spray coating process

  9. Entomopathogenic nematodes for the control of phorid and sciarid flies in mushroom crops

    OpenAIRE

    Navarro, María Jesús; Gea, Francisco José

    2014-01-01

    The objective of this work was to evaluate the efficacy of two nematodes, Steinernema feltiae and S. carpocapsae, to control mushroom flies and to evaluate the effect of these treatments on Agaricus bisporus production. Two mushroom cultivation trials were carried out in controlled conditions, in substrate previously infested with the diptera Megaselia halterata and Lycoriella auripila, with two treatments: 106infective juveniles (IJ) per square meter of S. feltiae and 0.5x106IJ m-2S. feltiae...

  10. Highly reproducible surface-enhanced Raman scattering-active Au nanostructures prepared by simple electrodeposition: origin of surface-enhanced Raman scattering activity and applications as electrochemical substrates.

    Science.gov (United States)

    Choi, Suhee; Ahn, Miri; Kim, Jongwon

    2013-05-24

    The fabrication of effective surface-enhanced Raman scattering (SERS) substrates has been the subject of intensive research because of their useful applications. In this paper, dendritic gold (Au) rod (DAR) structures prepared by simple one-step electrodeposition in a short time were examined as an effective SERS-active substrate. The SERS activity of the DAR surfaces was compared to that of other nanostructured Au surfaces with different morphologies, and its dependence on the structural variation of DAR structures was examined. These comparisonal investigations revealed that highly faceted sharp edge sites present on the DAR surfaces play a critical role in inducing a high SERS activity. The SERS enhancement factor was estimated to be greater than 10(5), and the detection limit of rhodamine 6G at DAR surfaces was 10(-8)M. The DAR surfaces exhibit excellent spot-to-spot and substrate-to-substrate SERS enhancement reproducibility, and their long-term stability is very good. It was also demonstrated that the DAR surfaces can be effectively utilized in electrochemical SERS systems, wherein a reversible SERS behavior was obtained during the cycling to cathodic potential regions. Considering the straightforward preparation of DAR substrates and the clean nature of SERS-active Au surfaces prepared in the absence of additives, we expect that DAR surfaces can be used as cost-effective SERS substrates in analytical and electrochemical applications. Copyright © 2013 Elsevier B.V. All rights reserved.

  11. In vitro study on porous silver scaffolds prepared by electroplating method using cellular carbon skeleton as the substrate

    International Nuclear Information System (INIS)

    Guo, M.; Wang, X.; Zhou, H.M.; Li, L.; Nie, F.L.; Cheng, Y.; Zheng, Y.F.

    2012-01-01

    Porous silver scaffolds, with the porosity ranging from 68% to 81% and the apparent density ranging from 0.4 to 1 g⋅cm −3 were prepared by electroplating method using cellular carbon skeleton as the substrate. The microstructure, mechanical property, cytotoxicity and antibacterial activity of the prepared porous silver scaffold were studied. The present porous silver scaffolds had a highly three-dimensional trabecular porous structure with the porosity and the apparent density close to that of the cancellous bone. Furthermore, the mechanical property such as elastic modulus and yield strength of the porous silver scaffolds were lower than that of commercial available porous Ti and porous Ti alloys but much closer to that of the cancellous bone and porous Ta. In addition, study of in vitro behavior showed that the porous silver scaffold possessed significant antibacterial capability of inhibition of bacterial proliferation and adherence against Staphylococcus aureus and Staphylococcus epidermidis, and little cytotoxicity to Mg-63 cell line and NIH-3T3 cell line. Consequently, the porous silver scaffolds prepared by electrodeposition possess a promising application for bone implants. - Highlights: ► Porous Ag scaffolds were produced by electroplating Ag on cellular carbon skeleton. ► Porous Ag scaffolds have the porosity 68–81% and the apparent density 0.4–1 g⋅cm −3 . ► The mechanical property of porous Ag is close to cancellous bone and porous Ta. ► Porous Ag inhibits the proliferation and adherence of S. aureus and S. epidermidis.

  12. Influence of enriched soaking water on shiitake (Lentinus edodes (Berk. Singer mushroom yield and properties

    Directory of Open Access Journals (Sweden)

    Mohammad Ebrahim RANJBAR

    2017-12-01

    Full Text Available Shiitake is an edible mushroom native to East Asia. In the present research, the soaking water was targeted as the vehicle to enrich the substrate. The amount of nutrients in the substrate is severely reduced by mycelium growth and development during spawn running and browning period. Some part of this reduction can be compensated by soaking the substrate in the enriched soaking water. In this study, soaking water was enriched by some complement materials and enrichment effects on some important properties of shiitake mushroom were evaluated. The highest biological efficiency (69.88 % was gained with soaking the blocks in wheat bran extraction suspension. The highest dry matter of mushroom was obtained by rice bran extraction suspension as the enriched soaking water. The results of this research showed that some important properties of shiitake mushroom can be improved by soaking the blocks with enriched soaking water. According to the results, wheat bran extraction suspension was the best enriched solution to increase productivity of shiitake mushrooms and rice bran extraction suspension was suitable to improve quality of mushrooms.

  13. Contamination of mushrooms with radionuclides

    International Nuclear Information System (INIS)

    Benova, K.

    2013-01-01

    There is 27 years after the Chernobyl nuclear accident and the half-life of 137 Cs is 30 years. The radioactive cloud hit both former Czechoslovakia, but also very distant cities throughout Europe. In this work, author focused on recovery of radiocesium content in mushrooms from various sites in Slovakia, Poland and England. Author evaluated 28 samples of dried mushrooms. 137 Cs was measured by gamma spectrometry (Canberra). Elevated levels have been reported occasionally in mushroom not only in Slovakia but also in distant England. The values obtained are lower than recommended standard (author)

  14. Utilization following of bioremediation attributes using oyster mushrooms - Pleurotus ostreatus

    International Nuclear Information System (INIS)

    Galanda, D.; Matel, L.

    2007-01-01

    The mushrooms are not only rich food products, but also a specific component of forest biogeocenoses playing an important role in their functioning, including radionuclide migration. The reason why fungi work as such good indicators for radioactivity and pollution in general is connected to their structure. Using absorption to obtain their nutrition, fungi lack water-conducting organs like stems and roots. They absorb moisture and nutrients from the soil background through surface cells. Dissolved or airborne materials, which include pollutants, move freely through the compartments of hyphae. What is more, radiation released during nuclear testing or accidents is absorbed, especially in areas where it rained heavily shortly after the incident. The present work is devoted to an estimation of the transfer coefficient between reared oyster mushrooms and their support die, which was injected with known activity of 241 Am and 242 Pu. After 2 months when we get the reared mushrooms of cane oyster mushrooms were dried and prepared by liquid extraction with Aliquat 336. The samples were measured by alpha-spectrometry. The results of activity 241 Am and 242 Pu in the mushrooms body and residual activity in the support was detected and calculated (authors)

  15. Determination of transfer coefficient between oyster mushrooms and cultivating medium using 242Pu and 241Am tracers

    International Nuclear Information System (INIS)

    Galanda, D.; Matel, L.

    2003-01-01

    The present work is devoted to an estimation of the transfer coefficient between reared oyster mushrooms and their support die, which was injected with known activity of Am-241 and Pu-242. After 2 months when we get the reared mushrooms of cane oyster mushrooms were dried and prepared by liquid extraction with Aliquat 336. The samples were measured by α-spectrometry. The results of activity Am-241 and Pu-242 in the mushrooms body and residual activity in the support were detected and calculated. (authors)

  16. Bioaccumulation of 40K and 137Cs in Mushrooms Collected on Different Locations in Macedonia

    International Nuclear Information System (INIS)

    Dimitrieska Stojkovik, E.; Hajrulai Musliu, Z.; Sekulovski, P.; Stojanovska Dimzoska, B.; Todorovik, A.; Uzunov, R.

    2013-01-01

    Wild mushrooms have become popular delicacy in many countries including Macedonia. Some of these mushrooms are especially interesting for analysis because they absorb mineral materials, and with this they can't avoid contamination. Because they have specific content they are trap for contaminations. There is a shortage of investigations in Macedonia referring to radioactive contamination of mushrooms. For that reason the aim of this investigation was to determine the degree of radioactive contamination of certain varieties of mushrooms. During the investigation, 131 samples of mushrooms were taken from different locations in Macedonia. Radioactive measurement was done without previous preparation of samples. The fresh samples are measured in 0.5 l containers for analysis. The radioactive measurement is done with clean semi-conducting gamma spectrometer (CANBERRA PACKARD) which provides identification of radionuclides and estimation of their activity. The efficiency of the detector is 30 % measured of 60Co. On the basic of results we can see that activity of radionuclides in the tested mushrooms is not equal, but varies depending on the type of the mushrooms. From the analysis, we see that the results are normal and are in range of Regulations for maximum allowed limits for radioactive contamination. The level of specific activities of radionuclide concentrations for the given types of mushrooms are level of regional values.(author)

  17. Experimental and Numerical Study of the Influence of Substrate Surface Preparation on Adhesion Mechanisms of Aluminum Cold Spray Coatings on 300M Steel Substrates

    Science.gov (United States)

    Nastic, A.; Vijay, M.; Tieu, A.; Rahmati, S.; Jodoin, B.

    2017-10-01

    The effect of substrate surface topography on the creation of metallurgical bonds and mechanical anchoring points has been studied for the cold spray deposition of pure aluminum on 300M steel substrate material. The coatings adhesion strength showed a significant decrease from 31.0 ± 5.7 MPa on polished substrates to 6.9 ± 2.0 MPa for substrates with roughness of 2.2 ± 0.5 μm. Strengths in the vicinity of 45 MPa were reached for coatings deposited onto forced pulsed waterjet treated surfaces with roughnesses larger than 33.8 μm. Finite element analysis has confirmed the sole presence of mechanical anchoring in coating adhesion strength for all surface treatment except polished surfaces. Grit embedment has been shown to be non-detrimental to coating adhesion for the current deposited material combination. The particle deformation process during impacts has been studied through finite element analysis using the Preston-Tonks-Wallace (PTW) constitutive model. The obtained equivalent plastic strain (PEEQ), temperature, contact pressure and velocity vector were correlated to the particle ability to form metallurgical bonds. Favorable conditions for metallurgical bonding were found to be highest for particles deposited on polished substrates, as confirmed by fracture surface analysis.

  18. CULTIVATION OF THE EDIBLE MUSHROOM OUDEMANSIELLA CANARII (JUNGH. HÖHN. IN LIGNOCELLULOSIC SUBSTRATES Cultivo do cogumelo comestível Oudemansiella canarii (Jungh. Höhn. em substratos lignocelulósicos

    Directory of Open Access Journals (Sweden)

    Marcelo José Silveira Ruegger

    2001-10-01

    Full Text Available The edible mushroom Oudemansiella canarii (Jungh. Höhn is common in the Brazilian territory, being found in different biomas, where they colonize several plant species. In this study, the O. canarii cultivation was evaluated in polypropilene bags containing sugar-cane bagasse (200 g or eucalyptus sawdust (200 g supplemented with wheat bran (50 g. The composts were sterilized at 121ºC for 1 hour, after cooling they were inoculated with 3 g of spawn and then remained incubated at 25ºC until the basidiomata primordia formation. The mushrooms, harvested after the pilei opening, presented varied sizes reaching 9 cm of diameter and 10 cm of height. The fresh mushrooms presented mild taste and soft consistency. When kept at 4ºC, they maintained good appearance and good consistency for 7 days. In a period of 60 days, the largest basidiomata production was obtained in the compost with sugar-cane bagasse, showing greater productivity (4.47% ± 1.34, biological efficiency (55.66% ± 20.41 and compost consumption (38.78% ± 4.59 averages. Wilcoxon's non-parametric statistical analysis used to compare the biomass production in the two composts, showed significant differences at 5% significance level.O cogumelo comestível Oudemansiella canarii (Jungh. Höhn., é comum no território brasileiro, sendo encontrado em diferentes biomas, onde colonizam várias espécies vegetais. Neste estudo, o cultivo deste basidiomiceto foi realizado em sacos plásticos contendo bagaço de cana-de-açúcar (200 g ou serragem de eucalipto (200 g suplementados com farelo de trigo (50 g. Os substratos foram esterilizados a 121ºC por 1 hora, inoculados com 3 g de grãos de trigo colonizados por micélio do fungo e permaneceram incubados a 25ºC até a formação dos primórdios dos basidiomas. Os cogumelos, colhidos após a abertura do píleo, apresentaram tamanhos variados chegando a atingir 9 cm de diâmetro por 10 cm de altura. Os cogumelos frescos apresentaram paladar

  19. The role of culinary-medicinal mushrooms on human welfare with a pyramid model for human health.

    Science.gov (United States)

    Chang, Shu Ting; Wasser, Solomon P

    2012-01-01

    ) (tonics). The advantages of using mushroom-based DSs as a matter of safety (as opposed to herbal preparations) are: (1) The overwhelming majority of mushrooms used for production of DSs are cultivated commercially (and not gathered in the wild). (2) Mushrooms are easily propagated vegetatively and thus keep to one clone. The mycelium can be stored for a long time, and the genetic and biochemical consistency can be checked after a considerable time. (3) The main advantage, in our opinion, is that many mushrooms are capable of growing in the form of mycelial biomass in submerged cultures. In this review, we discuss legal and regulatory issues introducing and controlling DSs from MMs in different countries, including the United States, the European Community, Australia, New Zealand, Japan, and P.R. China, and guidelines of the World Health Organization. One of the targets of the present review is also to draw attention to many critically important unsolved problems in the future development of medicinal mushroom science in the 21st century.

  20. Preparing of Highly Conductive Patterns on Flexible Substrates by Screen Printing of Silver Nanoparticles with Different Size Distribution.

    Science.gov (United States)

    Ding, Jin; Liu, Jun; Tian, Qingyong; Wu, Zhaohui; Yao, Weijing; Dai, Zhigao; Liu, Li; Wu, Wei

    2016-12-01

    A facile one-step polyol method is employed to synthesize the Ag nanoparticles (NPs) in large scale. The Ag NPs with different average diameter (from 52 to 120 nm) and particle size distribution are prepared by changing the mass ratio of AgNO3 and PVP. Furthermore, the as-obtained Ag NPs are prepared as conductive inks, which could be screen printed on various flexible substrates and formed as conductive patterns after sintering treatment. During the reaction process, PVP is used as the capping reagent for preventing the agglomeration of Ag NPs, and the influence of the mass ratio of AgNO3 and PVP to the size distribution of Ag NPs is investigated. The results of electronic properties reveal that the conductivity of printed patterns is highly dependent on the size distribution of as-obtained Ag NPs. Among all the samples, the optimal conductivity is obtained when the mass ratio of AgNO3 and PVP is 1:0.4. Subsequently, the sintering time and temperature are further investigated for obtaining the best conductivity; the optimal electrical resistivity value of 3.83 μΩ · cm is achieved at 160 °C for 75 min, which is close to the resistivity value of the bulk silver (1.58 μΩ · cm). Significantly, there are many potential advantages in printed electronics applications because of the as-synthesized Ag NPs with a low sintering temperature and low electrical resistivity.

  1. Substrate bias effect on crystallinity of polycrystalline silicon thin films prepared by pulsed ion-beam evaporation method

    Energy Technology Data Exchange (ETDEWEB)

    Ali, Fazlat; Gunji, Michiharu; Yang, Sung-Chae; Suzuki, Tsuneo; Suematsu, Hisayuki; Jiang, Weihua; Yatsui, Kiyoshi [Nagaoka Univ. of Technology, Extreme Energy-Density Research Inst., Nagaoka, Niigata (Japan)

    2002-06-01

    The deposition of polycrystalline silicon thin films has been tried by a pulsed ion-beam evaporation method, where high crystallinity and deposition rate have been achieved without heating the substrate. The crystallinity and the deposition rate were improved by applying bias voltage to the substrate, where instantaneous substrate heating might have occurred by ion-bombardment. (author)

  2. Substrate bias effect on crystallinity of polycrystalline silicon thin films prepared by pulsed ion-beam evaporation method

    International Nuclear Information System (INIS)

    Ali, Fazlat; Gunji, Michiharu; Yang, Sung-Chae; Suzuki, Tsuneo; Suematsu, Hisayuki; Jiang, Weihua; Yatsui, Kiyoshi

    2002-01-01

    The deposition of polycrystalline silicon thin films has been tried by a pulsed ion-beam evaporation method, where high crystallinity and deposition rate have been achieved without heating the substrate. The crystallinity and the deposition rate were improved by applying bias voltage to the substrate, where instantaneous substrate heating might have occurred by ion-bombardment. (author)

  3. Preparation and modification of VO2 thin film on R-sapphire substrate by rapid thermal process

    Science.gov (United States)

    Zhu, Nai-Wei; Hu, Ming; Xia, Xiao-Xu; Wei, Xiao-Ying; Liang, Ji-Ran

    2014-04-01

    The VO2 thin film with high performance of metal-insulator transition (MIT) is prepared on R-sapphire substrate for the first time by magnetron sputtering with rapid thermal process (RTP). The electrical characteristic and THz transmittance of MIT in VO2 film are studied by four-point probe method and THz time domain spectrum (THz-TDS). X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and search engine marketing (SEM) are employed to analyze the crystalline structure, valence state, surface morphology of the film. Results indicate that the properties of VO2 film which is oxidized from the metal vanadium film in oxygen atmosphere are improved with a follow-up RTP modification in nitrogen atmosphere. The crystallization and components of VO2 film are improved and the film becomes compact and uniform. A better phase transition performance is shown that the resistance changes nearly 3 orders of magnitude with a 2-°C hysteresis width and the THz transmittances are reduced by 64% and 60% in thermal and optical excitation respectively.

  4. Preparation of textured high Tc superconducting films by CVD using halides on technical substrates with appropriate buffer layers. Final report

    International Nuclear Information System (INIS)

    Selbmann, D.; Balarin, M.; Klosowski, J.

    1993-01-01

    On the basis of a thermodynamical calculation of the system Y-Ba-Cu-O-Hal-C-H, Hal = I, Br, Cl the deposition conditions of the 123-phase and the other phases in this system was investigated. For the practical applications a reaction temperature higher 850 C and an oxidizer excesse higher 5 . 10 3 is necessary in order to deposit halid- and carbon free layers. A new Aerosol-CVD-process has been developed, which allows the reproducible preparation of superconducting YBa 2 Cu 3 O 7 thin films. The process uses a solution source of Y-, Ba-, Cu-bromide dissolved in suitable organic solvents. With the process the films consisting of the 123-phase, however the content of other phases is too high. With this composition it is not possible to deposit textured layers. This behaviour is due to flow technical problems. In order to avoid the formation of oxides in the evaporator it is necessary to mix the oxidizer directly near the substrate. Therefore the development of a new reactor and a process optimization is necessary. (orig.) [de

  5. Preparation and modification of VO2 thin film on R-sapphire substrate by rapid thermal process

    International Nuclear Information System (INIS)

    Zhu Nai-Wei; Hu Ming; Xia Xiao-Xu; Wei Xiao-Ying; Liang Ji-Ran

    2014-01-01

    The VO 2 thin film with high performance of metal–insulator transition (MIT) is prepared on R-sapphire substrate for the first time by magnetron sputtering with rapid thermal process (RTP). The electrical characteristic and THz transmittance of MIT in VO 2 film are studied by four-point probe method and THz time domain spectrum (THz-TDS). X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and search engine marketing (SEM) are employed to analyze the crystalline structure, valence state, surface morphology of the film. Results indicate that the properties of VO 2 film which is oxidized from the metal vanadium film in oxygen atmosphere are improved with a follow-up RTP modification in nitrogen atmosphere. The crystallization and components of VO 2 film are improved and the film becomes compact and uniform. A better phase transition performance is shown that the resistance changes nearly 3 orders of magnitude with a 2-°C hysteresis width and the THz transmittances are reduced by 64% and 60% in thermal and optical excitation respectively. (interdisciplinary physics and related areas of science and technology)

  6. Disposal of agro-industrial by-products by organic cultivation of the culinary and medicinal mushroom Hypsizygus marmoreus.

    Science.gov (United States)

    Akavia, E; Beharav, A; Wasser, S P; Nevo, E

    2009-05-01

    Organic mushroom cultivation is one of the fastest growing segments of agriculture. At the core of the organic philosophy lies a ban on the use of synthetic fertilizers, pesticides and herbicides, in addition to such tenets as animal welfare, energy efficiency, and social justice. Hypsizygus marmoreus (HM) is a highly praised cultivated culinary and medicinal mushroom. The objective of this paper was to assess the suitability of different spawn media and then the potential of various cultivation substrates to support HM mushroom production compatible with organic standards. This objective was met through the setup of a low-cost cultivation infrastructure. First, seven types of spawn media were tested; then we tested 24 substrates made from organic by-products for their biological efficiency (BE) with strain HM 830, using the liquid inoculation method. The best substrate in terms of BE was corn cob with bran and olive press cake, with a BE of 85.6%. The BE of the same composition but without olive press cake was only 67.5%. The next best substrates were cotton straw combinations with a BE of 31.5-53%. The spent mushroom substrate provides a good method for the disposal of solid waste. The guidance provided in this research complies with organic mushroom cultivation standards and can be used to produce certified organic mushrooms. In addition, it allows responsible and beneficial disposal of a large amount of solid agro-industrial waste.

  7. Diseases and pests noxious to Pleurotus spp. mushroom crops.

    Science.gov (United States)

    Bellettini, Marcelo B; Bellettini, Sebastião; Fiorda, Fernanda A; Pedro, Alessandra C; Bach, Fabiane; Fabela-Morón, Miriam F; Hoffmann-Ribani, Rosemary

    The Pleurotus genus is one of most extensively studied white-rot fungi due to its exceptional ligninolytic properties. It is an edible mushroom that possesses biological effects, as it contains important bioactive molecules. It is a rich source of nutrients, particularly proteins, minerals as well as vitamins B, C and D. In basidiomycete fungi, intensive cultivations of edible mushrooms can often be affected by some bacterial, mold and virus diseases that rather frequently cause dramatic production loss. These infections are facilitated by the particular conditions under which mushroom cultivation is commonly carried out such as warm temperatures, humidity, carbon dioxide (CO 2 ) levels and presence of pests. There is not much bibliographic information related to pests of mushrooms and their substrates. The updated review presents a practical checklist of diseases and pests of the Pleurotus genus, providing useful information that may help different users. Copyright © 2017 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

  8. Preparation of a Non-Polar ZnO Film on a Single-Crystal NdGaO3 Substrate by the RF Sputtering Method

    Science.gov (United States)

    Kashiwaba, Y.; Tanaka, Y.; Sakuma, M.; Abe, T.; Imai, Y.; Kawasaki, K.; Nakagawa, A.; Niikura, I.; Kashiwaba, Y.; Osada, H.

    2018-04-01

    Preparation of non-polar ZnO ( 11\\overline{2} 0 ) films on single-crystal NdGaO3 (NGO) (001) substrates was successfully achieved by the radio frequency (RF) sputtering method. Orientation, deposition rate, and surface roughness of ZnO films strongly depend on the working pressure. Characteristics of ZnO films deposited on single-crystal NGO (001) substrates were compared with those of ZnO films deposited on single-crystal sapphire ( 01\\overline{1} 2 ) substrates. An x-ray diffraction peak of the ZnO ( 11\\overline{2} 0 ) plane was observed on ZnO films deposited on single-crystal NGO (001) substrates under working pressure of less than 0.5 Pa. On the other hand, uniaxially oriented ZnO ( 11\\overline{2} 0 ) films on single-crystal sapphire ( 01\\overline{1} 2 ) substrates were observed under working pressure of 0.1 Pa. The mechanism by which the diffraction angle of the ZnO ( 11\\overline{2} 0 ) plane on single-crystal NGO (001) substrates was shifted is discussed on the basis of anisotropic stress of lattice mismatch. The deposition rate of ZnO films decreased with an increase in working pressure, and the deposition rate on single-crystal NGO (001) substrates was larger than that on single-crystal sapphire ( 01\\overline{1} 2 ) substrates. Root mean square (RMS) roughness of ZnO films increased with an increase in working pressure, and RMS roughness of ZnO films on single-crystal NGO (001) substrates was smaller than that of ZnO films on single-crystal sapphire ( 01\\overline{1} 2 ) substrates even though the film thickness on single-crystal NGO (001) substrates was greater than that on sapphire substrates. It is thought that a single-crystal NGO (001) substrate is useful for deposition of non-polar ZnO ( 11\\overline{2} 0 ) films.

  9. Recycling of Date-Palm Fiber to Produce Pleurotus Cornucopiae Var. Citrinopileatus Mushroom

    Directory of Open Access Journals (Sweden)

    Mustafa Nadhim Owaid

    2017-01-01

    Full Text Available In this study, some local available organic matters, which are including wheat straw (Triticum aestivum, sawdust, and fiber of date palm (Phoenix dactylifera L., were used for growing and cultivating of bright yellow oyster mushroom Pleurotus cornucopiae var. citrinopileatus. The possibility of using date palm fiber (in mixtures with other organic residues as a substrate for the cultivation and production of fruiting bodies of P. cornucopiae var. citrinopileatus was investigated. This mushroom is capable of biorecycling and utilization of some mixtures of lignocellulosic substrates successfully, especially the mixture S3 (50% wheat straw, 30% sawdust, and 20% date palm fiber. The lower mycelia completion time was 17 days, that shown in bags of the S3 substrate. Date-palm fiber substrate exhibited best growth intensity level (moderate significantly (p<0.05. The total yield and biological efficiency percent recorded approx. 90 g and 23% on the S3 substrate respectively, as a higher percent significantly (p<0.05, while sawdust substrate alone was an unsuitable medium for cultivation and production of this mushroom. Finally, the use of date-palm fibers in mixtures is usefulness in producing a fresh edible and medicinal mushroom.INTERNATIONAL JOURNAL OF ENVIRONMENTVolume-5, Issue-4, Sep-Nov 2016, page: 56-65

  10. β-FeSi2 films prepared on 6H-SiC substrates by magnetron sputtering

    Science.gov (United States)

    Hong, Li; Hongbin, Pu; Chunlei, Zheng; Zhiming, Chen

    2015-06-01

    β-FeSi2 thin films have been successfully prepared by magnetron sputtering and post rapid thermal annealing method on 6H-SiC (0001) substrates using a FeSi2 target and a Si target. X-ray diffraction (XRD) and Raman spectroscopy are applied to analyze the formation of β-FeSi2 films. XRD spectra reveal that the amorphous FeSi2 films are transformed to β-FeSi2 phase as the annealing temperature is increased from 500 to 900 °C for 5 min and the optimal annealing temperature is 900 °C. The formation of β-FeSi2 is also confirmed by Raman spectroscopy. Scanning electron microscope (SEM) observations indicate that the film is flat, relatively compact and the interface between β-FeSi2 and 6H-SiC is clear. Atomic force microscope (AFM) measurements demonstrate that the surface roughness confirmed by the root mean square (RMS) of the β-FeSi2 film is 0.87 nm. Near-infrared spectrophotometer observation shows that the absorption coefficient is of the order of 105 cm-1 and the optical band-gap of the β-FeSi2 film is 0.88 eV. The β-FeSi2 film with high crystal quality is fabricated by co-sputtering a FeSi2 target and a Si target for 60 min and annealing at 900 °C for 5 min. Project supported by the National Natural Science Foundation of China (No. 51177134) and the Natural Science Basic Research Plan in Shaanxi Province of China (No. 2015JM6286).

  11. Synthesis of carbon nanotube using camphor with SS 316 as catalytic substrate via oxidative heat treatment preparation method

    Science.gov (United States)

    Wulan, Praswasti Pembangun Dyah Kencana; Angelina, Dian

    2017-11-01

    Carbon nanotube (CNT) is a material that now often become the topic in nanotechnology research. CNT is widely used in the electronics industry especially for TV and computer flat panel displays, devices, automotives for car components, and batteries. Also for defense industries as well as other industries such as sports equipment. Camphor (C10H16O), a botanical hydrocarbon, can be used as a renewable and low cost carbon source for CNT synthesis. Synthesis was performed with stainless steel-316 (SS 316) as substrate, argon as carrier gas, and hydrogen as co-reactant. Preparation of the SS 316 was through a pretreatment by oxidative heat treatment method at a temperature of 850oC for 30 minutes, to remove the layer of chrome and make a rough surface as a growth media for CNT. The operating temperature of the synthesis used was 800oC with a reaction time of 60 minutes. Reactor, which made from stainless steel 316 (SS 316), was used for synthesis CNTs with maximum camphor mass of 20 grams. This research was conducted by varying the number of camphor mass by 5, 7, 10, 12, and 15 grams. The results showed that camphor decomposed into three compounds which are 40% benzene, 8% toluene, and 52% xylene. CNT grows on the surface of the SS 316 plate for each variation. CNTs have grown by follow tips growth model with deformations like buckling growth model and continuous growth model were also founded. The results of XRD showed that CNT were found in every camphor mass variation with high intensity at 2θ angle of 26° and 43°. The best quality and yield of CNT was obtained at camphor mass of 15 grams with carbon percentage of 87,1% and diameter 33 - 44 nm.

  12. Effectiveness of Training Programme on Mushroom Cultivation

    OpenAIRE

    Rahman, Md. Sazzadur; Hossain, Kh. Zulfikar; Ali, Md. Sekender; Afroz, Fauzia

    2017-01-01

    Effectiveness is one of the key parameters to assess success of any programs. However, the effectiveness of training programme on mushroom cultivation was not well addressed. The purposes of this study were to investigate the effectiveness of training programme on mushroom cultivation and to explore the relationships of each of the selected characteristics of the trained mushroom farmers with their effectiveness of training programme. Data were collected from the trained mushroom farmers of s...

  13. Structural and phase transitions of one and two polymer mushrooms in poor solvent

    Science.gov (United States)

    Yang, Delian; Wang, Qiang

    2014-05-01

    Using the recently proposed fast lattice Monte Carlo (FLMC) simulations and the corresponding lattice self-consistent field (LSCF) calculations based on the same model system, where multiple occupancy of lattice sites is allowed [Q. Wang, Soft Matter 5, 4564 (2009); Q. Wang, Soft Matter 5, 6206 (2010)], we studied the coil-globule transition (CGT) of one-mushroom systems and the fused-separated transition (FST) of two-mushroom systems, where a polymer mushroom is formed by a group of n homopolymer chains each of N segments end-grafted at the same point onto a flat substrate and immersed in a poor solvent. With our soft potential that allows complete particle overlapping, LSCF theory neglecting the system fluctuations/correlations becomes exact in the limit of n → ∞, and FLMC results approach LSCF predictions with increasing n. Using LSCF calculations, we systematically constructed the phase diagrams of one- and two-mushroom systems. A second-order symmetric-asymmetric transition (SAT) was found in the globule state of one-mushroom systems, where the rotational symmetry around the substrate normal passing through the grafting point is broken in each individual configuration but preserved by the degeneracy of different orientations of these asymmetric configurations. Three different states were also found in two-mushroom systems: separated coils, separated globules, and fused globule. We further studied the coupling between FST in two-mushroom systems and CGT and SAT of each mushroom. Finally, direct comparisons between our simulation and theoretical results, without any parameter-fitting, unambiguously and quantitatively revealed the fluctuation/correlation effects on these phase transitions.

  14. Antibody modified gold nano-mushroom arrays for rapid detection of alpha-fetoprotein.

    Science.gov (United States)

    Li, Wanbo; Jiang, Xueqin; Xue, Jiancai; Zhou, Zhangkai; Zhou, Jianhua

    2015-06-15

    Localized surface plasmon resonance (LSPR) combined with immunoassay shows greatly potential in fast detection of tumor markers. In this paper, a highly sensitive LSPR substrate has been fabricated and modified for direct detection of alpha-fetoprotein (AFP). The biosensor was prepared by interference lithography, and modified by covalently immobilizing anti-AFP on the surface of gold nano-mushroom arrays (GNMA). The modification process was investigated by Vis-NIR reflectance spectra and cyclic voltammogram measurements. We revealed the optical properties of the modified GNMA by measuring the Vis-NIR reflectance spectra and simulating its electric intensity field distribution under light illumination. The GNMA substrate was highly sensitive, with a refractive index sensitivity of ~465 nm/RIU. The substrate can be applied to label-free detection of AFP, with the linear range and the limit of detection determined to be 20-200 ng/mL and 24 ng/mL (S/N=3), respectively. We also demonstrated its clinical application by directly detecting AFP in human serum samples. It is expected that our biosensor could be integrated on microfluidic chips for high-throughput detection in portable early diagnosis, post-operative and point-of-care (POC) in clinical applications. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Pulsed Laser Deposition of Zinc Sulfide Thin Films on Silicon: The influence of substrate orientation and preparation on thin film morphology and texture

    OpenAIRE

    Heimdal, Carl Philip J

    2014-01-01

    The effect of orientation and preparation of silicon substrates on the growth morphology and crystalline structure of ZnS thin films deposited by pulsed laser deposition (PLD) has been investigated through scanning electron microscopy (SEM) and grazing incidence x-ray diffraction (GIXRD). ZnS thin films were grown on silicon (100) and (111), on HF-treated and untreated silicon (100) as well as substrates coated with Al, Ge and Au. The ZnS films showed entirely different morphologies for ZnS f...

  16. Preparation of SrCoOx thin films on LaAlO3 substrate and their reversible redox process at moderate temperatures

    Science.gov (United States)

    Hao, L.; Zhang, Z. F.; Xie, X. N.; Wang, H. R.; Yu, Q. X.; Zhu, H.

    2015-10-01

    Using magnetron sputtering and annealing techniques, we have prepared SrCoOx films on LaAlO3 and SrTiO3 substrates. Distinctly different structures of the films have been found on the two substrates. It is suggested that positive lattice mismatch between film and substrate promotes SrCoO2.5 films with an orthorhombic structure grown on SrTiO3 substrate, whereas negative lattice mismatch from LaAlO3 substrate is in favor of increasing the valence state of Co and thus the growth of oxygen-rich SrCoOx with a tetragonal structure. In addition to the structural characterization, magnetic and electrical measurements confirm that the oxygen content x is between 2.75 and 2.88 for the latter. Reversibility of the topotactic phase transformation between SrCoO2.5 and the oxygen-rich SrCoOx films has also been studied by changing the oxygen pressure during annealing process. Even in the presence of a negative lattice mismatch, the results reveal that the tetragonal SrCoOx films on LaAlO3 substrate retain high oxygen mobility identified before in cubic SrCoOx films.

  17. Wild and domesticated mushroom consumption in Nigeria ...

    African Journals Online (AJOL)

    African Crop Science Journal ... On the other hand, if nutrition analysis reveals different nutrition parameters for both types of mushrooms, 43.3% opted for cultivated mushroom, 42.2%, wild; 12.2% both; while 2.2% would eat ... Keywords: Consumption pattern, Lentinus squarrosulus, nutrition, perception, wild mushroom ...

  18. Disease control by chemical and biological fungicides in cultivated mushrooms: button mushroom, oyster mushroom and shiitake

    Directory of Open Access Journals (Sweden)

    Ivana Potočnik

    2015-12-01

    Full Text Available The most commonly cultivated basidiomycetes worldwide and in Serbia are button mushroom (Agaricus bisporus, oyster mushroom (Pleurotus sp. and shiitake (Lentinus edodes. Production of their fruiting bodies is severely afflicted by fungal, bacterial, and viral pathogens that are able to cause diseases which affect yield and quality. Major A. bisporus fungal pathogens include Mycogone perniciosa, Lecanicillium fungicola, and Cladobotryum spp., the causal agents of dry bubble, wet bubble, and cobweb disease, respectively. Various Trichoderma species, the causal agents of green mould, also affect all three kinds of edible mushrooms. Over the past two decades, green mould caused by T. aggressivum has been the most serious disease of button mushroom. Oyster mushroom is susceptible to T. pleurotum and shiitake to T. harzianum. The bacterial brawn blotch disease, caused by Pseudomonas tolaasii, is distributed globally. Disease control on mushroom farms worldwide is commonly based on the use of fungicides. However, evolution of pathogen resistance to fungicides after frequent application, and host sensitivity to fungicides are serious problems. Only a few fungicides are officially recommended in mushroom production: chlorothalonil and thiabendazol in North America and prochloraz in the EU and some other countries. Even though decreased sensitivity levels of L. fungicola and Cladobotryum mycophilum to prochloraz have been detected, disease control is still mainly provided by that chemical fungicide. Considering such resistance evolution, harmful impact to the environment and human health, special attention should be focused on biofungicides, both microbiological products based on Bacillus species and various natural substances of biological origin, together with good programs of hygiene. Introduction of biofungicides has created new possibilities for crop protection with reduced application of chemicals.

  19. Growth performance of commercial temperate mushrooms Agaricus bisporus and Hypsizygus sp. under local environment

    International Nuclear Information System (INIS)

    Rosnani Abdul Rashid; Mat Rasol Awang; Hassan Hamdani Hassan Mutaat; Mohd Meswan Maskom

    2010-01-01

    To date, the Malaysian mushroom industry focuses on only seven species of mushroom for commercial purpose. To expand and further develop the mushroom industry, new mushroom species should be introduced into our local market. Temperate mushrooms are possible to be cultivated commercially in Malaysia but the optimisation of growth performance for high quality spawn and high mushroom yield need to be studied. In the present study the growth performance of mycelia of Agaricus bisporus and Hypsizygus sp. on culture media and substrates were investigated. Four types of culture media, viz. Potato Dextrose Agar (PDA), Nutrient Agar (NA), Malt Yeast Extract (MYE) and Complete Yeast Media (CYM) were used to determine the suitable culturing media for mycelial growth. The mycelia were inoculated on oil palm empty fruit bunch (EFB) and sawdust substrate and incubated at room temperature and in a low temperature in incubation room (10 - 12 degree Celsius). From the observation, Agaricus bisporus grew better on Malt Yeast Extract (MYE) medium with a growth rate of 0.306 cm/ day. Complete Yeast Media (CYM) was found more suitable for Hypsizygus sp. with a growth rate of 1.049 cm/ day. The linear growth rate of mycelium as measured on the surface of mushroom bag of Agaricus bisporus on EFB incubated at room temperature was 0.4364 cm/ day and cool temperature was 0.055 cm/ day. For Hypsizygus sp. the linear growth rate of the mycelium was 2.11 cm/ day. The linear growth of Hypsizygus sp. on sawdust substrate incubated in cool temperature was 1.4 cm/ day. (author)

  20. Mercury in mushrooms and soil from the Wieluńska Upland in south-central Poland.

    Science.gov (United States)

    Falandysz, Jerzy; Bielawski, Leszek; Kawano, Masabide; Brzostowski, Andrzej; Chudzyński, Krzysztof

    2002-09-01

    Concentrations of mercury were determined in the fruiting bodies of 15 species of higher mushrooms and underlying soil substrate collected from Wieluńska Upland in northern part of Sandomierska Valley in south-central Poland in 1995. A total of 197 samples of caps, 197 stalks, 30 whole fruiting bodies and 227 soil (0-10 cm layer) were analyzed. Mean mercury concentrations in soil substrate corresponding to 15 mushroom species were between 28 +/- 17 and 85 +/- 62 ng/g dry matter (total range between 3.0-190 ng/g). The average cap to stalk concentration quotients of Hg were around 2 (range between 1.1 +/- 1.1 and 2.8 +/- 1.4). However, this quotient in Larch bolete (Suillus grevillei) was 4.4 +/- 6.3. Concentrations of Hg varied depending on the mushroom species. Parasol Mushroom (Macrolepiota procera) and Horse mushroom (Agaricus arvensis) contained the greatest mean mercury concentrations both in caps (between 4500 +/- 1700 and 4400 +/- 2400 ng/g dry matter) and stalks (between 2800 +/- 1300 and 3000 +/- 2000 ng/g dry matter). Both the Parasol Mushroom and Horse mushroom were characterised also by a greater potential to bioconcentrate mercury from soils as evidenced by great bioconcentration factors (BCFs), which were between 170 +/- 160 and 130 +/- 120 for caps, and 110 +/- 97 and 89 +/- 92 for stalks. Mercury concentrations in caps and stalks of False death cap (Amanita citrina) increased (p Suillus luteus).

  1. Usage of Edible Mushrooms in Various Food Products

    Directory of Open Access Journals (Sweden)

    Özge Süfer

    2016-03-01

    Full Text Available Using of edible mushrooms which are generally consumed in houses in dried form is based on mainly instant soup and sauce formulations. Recently, the cultivations of Agaricus bisporus and Pleurotus ostreatus species have become widespread. Utilization of these cultivated mushrooms in recipes would bring added value to related food products. For this purpose, Agaricus bisporus and Pleurotus ostreatus species farmed in Osmaniye Korkut Ata University Mushroom House were dried and then pulverized. Firstly, a snack was prepared with Agaricus bisporus powder. Agaricus bisporus powder was substituted for wheat flour at the rates of 5 %, 10 %, 20 % and 30 % and thus the potential of food product which had relatively lower carbohydrate and fat level and higher fiber content was investigated. In the second part of the study, either 5 %, 10 % of Agaricus bisporus powder or 5 %, 10 % of Pleurotus ostreatus powder were added into traditional Turkish meatball (beef mince, salt which was cooked in conventional oven, so meat flavor could be replaced by herbal flavor coming from mushroom. This property mat obey the purpose that, the created new product will be consumed fondly especially by children. Sensory and physical (colour and texture analysis were performed in both snack and meatball samples and the results were evaluated statistically.

  2. Forest farming of shiitake mushrooms: aspects of forced fruiting.

    Science.gov (United States)

    Bruhn, J N; Mihail, J D

    2009-12-01

    Three outdoor shiitake (Lentinula edodes (Berk.) Pegler) cultivation experiments were established during 2002-2004 at the University of Missouri Horticulture and Agroforestry Research Center, in central Missouri. Over three complete years following a year of spawn run, we examined shiitake mushroom production in response to the temperature of forcing water, inoculum strain, substrate host species and physical orientation of the log during fruiting. Forcing compressed the period of most productive fruiting to the two years following spawn run. Further, chilled forcing water, 10-12 degrees C, significantly enhanced yield, particularly when ambient air temperatures were favorable for the selected mushroom strain. The temperature of water available for force-fruiting shiitake logs depends on geographic location (latitude) and source (i.e., farm pond vs. spring or well water). Prospective growers should be aware of this effect when designing their management and business plans.

  3. Influence of Substrate Biasing on (Ba,Sr)TiO3 Films Prepared by Electron Cyclotron Resonance Plasma Sputtering

    Science.gov (United States)

    Matsumoto, Takeshi; Niino, Atsushi; Ohtsu, Yasunori; Misawa, Tatsuya; Yonesu, Akira; Fujita, Hiroharu; Miyake, Shoji

    2004-03-01

    (Ba,Sr)TiO3 (BST) films were deposited by electron cyclotron resonance (ECR) plasma sputtering with mirror confinement. DC bias voltage was applied to Pt/Ti/SiO2/Si substrates during deposition to vary the intensity of bombardment of energetic ions and to modify film properties. BST films deposited on the substrates at floating potential (approximately +20 V) were found to be amorphous, while films deposited on +40 V-biased substrates were crystalline in spite of a low substrate temperature below 648 K. In addition, atomic diffusion, which causes deterioration in the electrical properties of the films, was hardly observed in the crystallized films deposited with +40 V bias perhaps due to the low substrate temperature. Plasma diagnoses revealed that application of a positive bias to the substrate reduced the energy of ion bombardment and increased the density of excited neutral particles, which was assumed to result in the promotion of chemical reactions during deposition and the crystallization of BST films at a low temperature.

  4. Essential and toxic element determination in edible mushrooms by neutron activation analysis

    International Nuclear Information System (INIS)

    Moura, Patricia Landim da Costa

    2008-01-01

    In this study concentrations of As, Br, Co, Cr, Cs, Fe, K, Na, Rb, Se and Zn were determined in edible mushrooms acquired from commercial establishments in the city of Sao Paulo and directly from Mogi das Cruzes, Suzano, Juquitiba and Mirandopolis producers. The analytical technique used for determining these elements in edible mushrooms was Instrumental Neutron Activation Analysis (INAA). Species of the Agaricus, Lentinus and Pleurotus genera were acquired during the period from November, 2006 to March, 2007. About 150 to 200 mg of freeze-dried mushrooms were irradiated in a neutron flux of 1012 cm -2 s -1 for 8 hours in the IEA-R1 nuclear research reactor at IPEN-CNEN-SP. In order to evaluate the precision and accuracy of the methodology, four reference materials: INCT-MPH-2 Mixed Polish Herbs and INCT-TL-1 Tea Leaves, NIST SRM 1577b Bovine Liver, and the material Mushroom from IAEA were analyzed. Results showed some variation in the element concentrations among the different genera. In some samples, arsenic was found but in low concentrations. Arsenic is probably derived from the contamination from pesticides used in the cultivation, in their the substrates where mushrooms uptake their nutrients. Although there are element concentration variations, mushrooms can still be considered a very rich nutritional source, mainly because of their low concentrations of Na, and due to the good source of K, Fe and Zn. (author)

  5. How gamma-rays and electron-beam irradiation would affect the antimicrobial activity of differently processed wild mushroom extracts?

    Science.gov (United States)

    Alves, M J; Fernandes, Â; Barreira, J C M; Lourenço, I; Fernandes, D; Moura, A; Ribeiro, A R; Salgado, J; Antonio, A; Ferreira, I C F R

    2015-03-01

    The effects of irradiation (gamma-rays and electron-beams), up to 10 kGy, in the antimicrobial activity of mushroom species (Boletus edulis, Hydnum repandum, Macrolepiota procera and Russula delica) differently processed (fresh, dried, freeze) were evaluated. Clinical isolates with different resistance profiles from hospitalized patients in Local Health Unit of Mirandela, Northeast of Portugal, were used as target micro-organisms. The mushrooms antimicrobial activity did not suffer significant changes that might compromise applying irradiation as a possible mushroom conservation technology. Two kGy dose (independently of using gamma-rays or electron-beams) seemed to be the most suitable choice to irradiate mushrooms. This study provides important results in antimicrobial activity of extracts prepared from irradiated mushroom species. © 2014 The Society for Applied Microbiology.

  6. WILD EDIBLE MUSHROOMS OF MEGHALAYA

    Science.gov (United States)

    Barua, Paran; Adhikary, R.K; Kalita, Pabitra; Bordoloi, Dalimi; Gogoi, P.; Singh, R.S.; Ghosh, A.C.

    1998-01-01

    Different flesh mushrooms grow widely in Meghalaya. Altogether fie edible species were collected and identified which were found abundantly in forest and are known to be consumed by local people for time immemorial, The species identified are lentinus edodes (Berk) Sing., Boletus edulis Bull ex Fr., Clavaria cinerea (Fr.) Schroet, Clavaria aurea (F) Quet and cantharellus floccosus Juss. PMID:22556840

  7. Preparation of MgO Films as Buffer Layers by Laser-ablation at Various Substrate Temperatures

    Institute of Scientific and Technical Information of China (English)

    LI Ling; WANG Chuanbin; WANG Fang; SHEN Qiang; ZHANG Lianmeng

    2011-01-01

    MgO thin films were deposited on Si(100) substrates by laser ablation under various substrate temperatures (Tsub),expecting to provide a candidate buffer layer for the textured growth of functional perovskite oxide films on Si substrates.The effect of Tsub on the preferred orientation,crystallinity and surface morphology of the films was investigated.MgO films in single-phase were obtained at 473-973 K.With increasing Tsub,the preferred orientation of the films changed from (200) to (111).The crystallinity and surface morphology was different too,depending on Tsub·At Tsub=673 K,the MgO film became uniform and smooth,exhibiting high crystallinity and a dense texture.

  8. Ultra-thin layer chromatography and surface enhanced Raman spectroscopy on silver nanorod array substrates prepared by oblique angle deposition

    Science.gov (United States)

    Chen, Jing; Abell, Justin; Huang, Yao-wen; Zhao, Yiping

    2012-06-01

    We demonstrate the potential use of silver nanorod (AgNR) array substrates for on-chip separation and detection of chemical mixtures by ultra-thin layer chromatography (UTLC) and surface enhanced Raman spectroscopy (SERS). The capability of the AgNR substrates to separate different compounds in a mixture was explored using a mixture of the food colorant Brilliant Blue FCF and lactic acid, and the mixtures of Methylene Violet and BSA at various concentrations. After the UTLC process, spatially-resolved SERS spectra were collected along the mobile phase development direction and the intensities of specific SERS peaks from each component were used to generate chromatograms. The AgNR substrates demonstrate the capability of separating Brilliant Blue from lactic acid, as well as revealing the SERS signal of Methylene Violet from the massive BSA background after a simple UTLC step. This technique may have significant practical implications in actual detection of small molecules from complex food or clinical backgrounds.

  9. Use of Mushroom Tyrosinase to Introduce Michaelis-Menten Enzyme Kinetics to Biochemistry Students

    Science.gov (United States)

    Flurkey, William H.; Inlow, Jennifer K.

    2017-01-01

    An inexpensive enzyme kinetics laboratory exercise for undergraduate biochemistry students is described utilizing tyrosinase from white button mushrooms. The exercise can be completed in one or two three-hour lab sessions. The optimal amounts of enzyme, substrate (catechol), and inhibitor (kojic acid) are first determined, and then kinetic data is…

  10. Effect of Atomic Hydrogen on Preparation of Highly Moisture-Resistive SiNx Films at Low Substrate Temperatures

    Science.gov (United States)

    Heya, Akira; Niki, Toshikazu; Takano, Masahiro; Yonezawa, Yasuto; Minamikawa, Toshiharu; Muroi, Susumu; Minami, Shigehira; Izumi, Akira; Masuda, Atsushi; Umemoto, Hironobu; Matsumura, Hideki

    2004-12-01

    Highly moisture-resistive SiNx films on a Si substrate are obtained at substrate temperatures of 80°C by catalytic chemical vapor deposition (Cat-CVD) using a source gas with H2. Atomic hydrogen effected the selective etching of a weak-bond regions and an increase in atomic density induced by the energy of the surface reaction. It is concluded that Cat-CVD using H2 is a promising candidate for the fabrication of highly moisture-resistive SiNx films at low temperatures.

  11. Preparation and characterization of pulsed laser deposited CdTe thin films at higher FTO substrate temperature and in Ar + O{sub 2} atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Chao; Ming, Zhenxun [College of Materials Science and Engineering, Sichuan University, Chengdu 610064, Sichuan (China); Li, Bing, E-mail: libing70@126.com [College of Materials Science and Engineering, Sichuan University, Chengdu 610064, Sichuan (China); Feng, Lianghuan [College of Materials Science and Engineering, Sichuan University, Chengdu 610064, Sichuan (China); Wu, Judy [Department of Physics and Astronomy, Kansas University, Lawrence 66045 (United States)

    2013-06-20

    Highlights: • CdTe films were deposited by PLD at high substrate temperatures (400 °C, 550 °C). • CdTe films were achieved under the atmosphere (1.2 Torr) of Ar mixed with O{sub 2}. • Deposited CdTe films were cubic phase and had strong (1 0 0) preferred orientation. • Scanning electron microscope (SEM) showed an average grain size of 0.3–0.6 μm. • The ultra-thin film (CdS/PLD-CdTe) solar cell with efficiency of 6.68% was made. -- Abstract: Pulsed laser deposition (PLD) is one of the promising techniques for depositing cadmium telluride (CdTe) thin films. It has been reported that PLD CdTe thin films were almost deposited at the lower substrate temperatures (<300 °C) under vacuum conditions. However, the poor crystallinity of CdTe films prepared in this way renders them not conducive to the preparation of high-efficiency CdTe solar cells. To obtain high-efficiency solar cell devices, better crystallinity and more suitable grain size are needed, which requires the CdTe layer to be deposited by PLD at high substrate temperatures (>400 °C). In this paper, CdTe layers were deposited by PLD (KrF, λ = 248 nm, 10 Hz) at different higher substrate temperatures (T{sub s}). Excellent performance of CdTe films was achieved at higher substrate temperatures (400 °C, 550 °C) under an atmosphere of Ar mixed with O{sub 2} (1.2 Torr). X-ray diffraction analysis confirmed the formation of CdTe cubic phase with a strong (1 0 0) preferential orientation at all substrates temperatures on 60 mJ laser energy. The optical properties of CdTe were investigated, and the band gaps of CdTe films were 1.51 eV and 1.49 eV at substrate temperatures of 400 °C and 550 °C, respectively. Scanning electron microscopy (SEM) showed an average grain size of 0.3–0.6 μm. Thus, under these conditions of the atmosphere of Ar + O{sub 2} (15 Torr) and at the relatively high T{sub s} (500 °C), an thin-film (FTO/PLD-CdS (100 nm)/PLD-CdTe (∼1.5 μm)/HgTe: Cu/Ag) solar cell with an

  12. Preparation of monolayers of Mn{sub 6}Cr single-molecule-magnets on different substrates and characterization by means of nc-AFM

    Energy Technology Data Exchange (ETDEWEB)

    Gryzia, Aaron; Brechling, Armin; Predatsch, Hans; Heinzmann, Ulrich [Faculty of Physics, Bielefeld University, D-33615 Bielefeld (Germany); Glaser, Thorsten [Faculty of Chemistry, Bielefeld University, D-33615 Bielefeld (Germany)

    2011-07-01

    The preparation of a highly ordered monolayer of Single-Molecule-Magnets (SMM) is one of the main preconditions for a technical application of these molecules. The adsorption of these SMMs on surfaces is associated with difficulties due to the often low chemical stability of these molecules in the vicinity of a surface. The used Mn{sub 6}Cr-complex has a C{sub 3}-symmetry and a spin ground state of S{sub t}=21/2. This complex is a trication and needs therefore counter ions for electrical charge compensation. Tetraphenylborate, lactate and perchlorate came into consideration for this function. Mn{sub 6}Cr-SMMs were prepared on different substrates by a droplet technique in air at room temperature. The samples were characterized by means of an AFM operating in non-contact mode, using tips with cone radii of approx. 2 nm. An island-like growth was observed on SiO{sub 2}- and Si{sub 3}N{sub 4}-substrates, whereas on HOPG and mica the Mn{sub 6}Cr-SMM adsorbates preferred a layer growth. Also an influence of the used counter ions was observed on different substrates. The measured thicknesses of the layers are consistent with the Van der Waals radii of the Mn{sub 6}Cr-SMMs.

  13. Molecular Beam Epitaxy on Gas Cluster Ion Beam Prepared GaSb Substrates: Towards Improved Surfaces and Interfaces

    National Research Council Canada - National Science Library

    Krishnaswami, Kannan; Vangala, Shivashankar R; Dauplaise, Helen M; Allen, Lisa P; Dallas, Gordon; Bakken, Daniel; Bliss, David F; Goodhue, WIlliam D

    2007-01-01

    ... at temperatures ranging 530 degrees C to 560 degrees C. Cross-sectional transmission electron microscopy of molecular beam epitaxy grown GaSb/AlGaSb layers showed that the HBr-GCIB surface produced a smooth dislocation-free substrate-to-epi transition...

  14. Structural and optical properties of Ag-doped copper oxide thin films on polyethylene napthalate substrate prepared by low temperature microwave annealing

    Energy Technology Data Exchange (ETDEWEB)

    Das, Sayantan; Alford, T. L. [Department of Chemistry and Biochemistry, Arizona State University, Tempe, Arizona 85287, USA and School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, Arizona 85287 (United States)

    2013-06-28

    Silver doped cupric oxide thin films are prepared on polyethylene naphthalate (flexible polymer) substrates. Thin films Ag-doped CuO are deposited on the substrate by co-sputtering followed by microwave assisted oxidation of the metal films. The low temperature tolerance of the polymer substrates led to the search for innovative low temperature processing techniques. Cupric oxide is a p-type semiconductor with an indirect band gap and is used as selective absorption layer solar cells. X-ray diffraction identifies the CuO phases. Rutherford backscattering spectrometry measurements confirm the stoichiometry of each copper oxide formed. The surface morphology is determined by atomic force microscopy. The microstructural properties such as crystallite size and the microstrain for (-111) and (111) planes are calculated and discussed. Incorporation of Ag led to the lowering of band gap in CuO. Consequently, it is determined that Ag addition has a strong effect on the structural, morphological, surface, and optical properties of CuO grown on flexible substrates by microwave annealing. Tauc's plot is used to determine the optical band gap of CuO and Ag doped CuO films. The values of the indirect and direct band gap for CuO are found to be 2.02 eV and 3.19 eV, respectively.

  15. Commercial Scale Production of Mushroom Liquid Seeds

    International Nuclear Information System (INIS)

    Rosnani Abdul Rashid; Hassan Hamdani Hassan Mutaat; Mohd Meswan Maskom; Khairuddin Abdul Rahim

    2015-01-01

    Mushroom liquid seed production technology was developed by Malaysian Nuclear Agency (Nuclear Malaysia) in the late 1990s. Initially, the liquid seeds were used mainly in the solid state fermentation process for converting oil palm empty fruit bunch fibres into ruminant feed. Considering widespread problems encountered by mushroom growers from use of solid seeds, especially in cases of contaminant agents infecting cultivated bags and inconsistencies in yield, we diverted our focus to utilising liquid seeds as alternative inocula for mushroom cultivation. These problems provide us opportunities to look into the issues and address the problems faced by mushroom growers. However, the technology of producing liquid seed at laboratory scale needs to be primed for commercial production. This paper discusses developmental aspects of mushroom liquid seed at commercial scale for the advancement of the country's mushroom industry. (author)

  16. The heavy metals content in wild growing mushrooms from burdened Spiš area

    Directory of Open Access Journals (Sweden)

    Marek Slávik

    2016-05-01

    Full Text Available In this work, we evaluated the rate of entry of heavy metals into the edible parts of wild mushrooms, from central Spiš area. The area is characterized by extremely high content of heavy metals particularly mercury in abiotic and biotic components of ecosystems. The toxicity of heavy metals is well known and described. Known is also the ability of fungi to accumulate contaminants from substrates in which mushrooms grow. We have collected commonly consumed species of mushrooms (Russula vesca., Macrolepiota procera, Lycoperdon pyriforme, Lecinum piceinum, Boletus reticulatus. Sampling was conducted for two years 2012 and 2013. The samples taken mushrooms and substrates on which to grow, we determined heavy metal content (Cd, Pb, Cu, including total mercury content modified by atomic absorption spectrometry (AMA - 254. In the substrate, we determined the humus content and pH value. The heavy metal content in soils were evaluated according to Law no. 220/2004 Z.z The exceedance limit values of Cd, Pb, Cu and Hg was recorded. Most significantly the respective limit was recorded in soil samples in the case of mercury. The determined concentration Hg was 39.01 mg.kg-1. From the results, we evaluated the degree of ability to bioaccumulate heavy metals different kinds of fungi. We also evaluated the health safety of the consumption of these fungi on the comparison with the limit values provided in the food code of SR. We recorded a high rate of accumulation of mercury in the species Boletus reticulatus and Macrolepiota procera. For these types we recorded the most significant than allowed concentrations of mercury in mushrooms. The highest recorded concentration reached 17.64 mg.kg-1 Hg in fresh matter. The limit value was exceeded also in the case of copper. We do not recommend to increased consumption of wild mushrooms in the reference area.

  17. Recycling of Vineyard and Winery Wastes as Nutritive Composts for Edible Mushroom Cultivation

    Science.gov (United States)

    Petre, Marian; Teodorescu, Alexandru

    2011-01-01

    Every year, in Romania huge amounts of wine and vine wastes cause serious environmental damages in vineyards as well as nearby winery factories, for instance, by their burning on the soil surface or their incorporation inside soil matrix. The optimal and efficient way to solve these problems is to recycle these biomass wastes as main ingredients in nutritive composts preparation that could be used for edible mushrooms cultivation. In this respect, the main aim of this work was to establish the best biotechnology of winery and vine wastes recycling by using them as appropriate growth substrata for edible and medicinal mushrooms. According to this purpose, two mushroom species of Basidiomycetes, namely Lentinula edodes as well as Pleurotus ostreatus were used as pure mushroom cultures in experiments. The experiments of inoculum preparation were set up under the following conditions: constant temperature, 23° C; agitation speed, 90-120 rev min-1 pH level, 5.0-6.0. All mycelia mushroom cultures were incubated for 120-168 h. In the next stage of experiments, the culture composts for mushroom growing were prepared from the lignocellulose wastes as vine cuttings and marc of grapes in order to be used as substrata in mycelia development and fruit body formation. The tested culture variants were monitored continuously to keep constant the temperature during the incubation as well as air humidity, air pressure and a balanced ratio of the molecular oxygen and carbon dioxide. In every mushroom culture cycle all the physical and chemical parameters that could influence the mycelia growing as well as fruit body formation of L. edodes and P. ostreatus were compared to the same fungal cultures that were grown on poplar logs used as control samples.

  18. Effects of different substrates on the yield and protein content of ...

    African Journals Online (AJOL)

    The effects of seven substrates for the cultivation, yield and protein content of the mushroom, Pleurotus tuberregium (Fries) Singer were investigated. The experimental design used was completely randomized design (CRD) of 7 treatments and 10 replicates. The highest fresh weight yield was obtained from mushrooms ...

  19. Lithium biofortification of medicinal mushrooms Agrocybe cylindracea and Hericium erinaceus.

    Science.gov (United States)

    Rzymski, Piotr; Niedzielski, Przemysław; Siwulski, Marek; Mleczek, Mirosław; Budzyńska, Sylwia; Gąsecka, Monika; Poniedziałek, Barbara

    2017-07-01

    Although an increase in dietary lithium (Li) has been suggested as a possible method for mood stabilization and for decreasing violence and suicidal rates, no Li-enriched food has entered the market. Here we continue to explore the feasibility of mushrooms in this respect and have investigated the growth, accumulation and mineral content (Ca, K, Mg and Na) of Agrocybe cylidracea and Hericium erinaceus cultivated on substrates supplemented with 0.25-1.0 mM of Li as acetate or chloride. As demonstrated, supplementation with LiCl yielded more satisfactory results, did not alter mushroom biomass, appearance, shape or size regardless of Li concentration. It also had no significant effect on mineral composition and resulted in a concentration-dependent uptake of Li and its accumulation in fruiting bodies. More promising results were found for H. erinaceus . As calculated, consumption of 100 g dw of its fruiting bodies obtained from cultivation with 1.0 mM of Li (as acetate or chloride) would constitute 69% of the provisional recommended dietary daily intake of Li set at 1.0 mg. The study highlights that H. erinaceus could be selected for further studies on Li-enriched food that concern the bioavailability of Li from mushrooms, their safety and activity in animal experimental models and eventually, human studies.

  20. Preparation of silver-cuprous oxide/stearic acid composite coating with superhydrophobicity on copper substrate and evaluation of its friction-reducing and anticorrosion abilities

    Energy Technology Data Exchange (ETDEWEB)

    Li, Peipei [Key Laboratory of Ministry of Education for Special Functional Materials, Henan University, Kaifeng 475004 (China); Chen, Xinhua [College of Chemistry and Chemical Engineering, Xuchang University, Xuchang 461000 (China); Yang, Guangbin; Yu, Laigui [Key Laboratory of Ministry of Education for Special Functional Materials, Henan University, Kaifeng 475004 (China); Zhang, Pingyu, E-mail: pingyu@henu.edu.cn [Key Laboratory of Ministry of Education for Special Functional Materials, Henan University, Kaifeng 475004 (China)

    2014-01-15

    A simple two-step solution immersion process was combined with surface-modification by stearic acid to prepare superhydrophobic coatings on copper substrates so as to reduce friction coefficient, increase wear resistance and improve the anticorrosion ability of copper. Briefly, cuprous oxide (Cu{sub 2}O) crystal coating with uniform and compact tetrahedron structure was firstly created by immersing copper substrate in 2 mol L{sup −1} NaOH solution. As-obtained Cu{sub 2}O coating was then immersed in 0.33 mmol L{sup −1} AgNO{sub 3} solution to incorporate silver nanoparticles, followed by modification with stearic acid (denoted as SA) coating to achieve hydrophobicity. The surface morphology and chemical composition of silver-cuprous oxide/stearic acid (denoted as Ag-Cu{sub 2}O/SA) composite coating were investigated using a scanning electron microscope and an X-ray photoelectron spectroscope (XPS); and its phase structure was examined with an X-ray diffractometer (XRD). Moreover, the contact angle of water on as-prepared Ag-Cu{sub 2}O/SA composite coating was measured, and its friction-reducing and anticorrosion abilities were evaluated. It was found that as-prepared Ag-Cu{sub 2}O/SA composite coating has a water contact angle of as high as 152.4{sup o} and can provide effective friction-reducing, wear protection and anticorrosion protection for copper substrate, showing great potential for surface-modification of copper.

  1. Preparation of metastable bcc permalloy epitaxial thin films on GaAs(011){sub B3} single-crystal substrates

    Energy Technology Data Exchange (ETDEWEB)

    Ohtake, Mitsuru, E-mail: ohtake@futamoto.elect.chuo-u.ac.jp [Faculty of Science and Engineering, Chuo University, 1-13-27 Kasuga, Bunkyo-ku, Tokyo 112-8551 (Japan); Higuchi, Jumpei; Yabuhara, Osamu [Faculty of Science and Engineering, Chuo University, 1-13-27 Kasuga, Bunkyo-ku, Tokyo 112-8551 (Japan); Kirino, Fumiyoshi [Graduate School of Fine Arts, Tokyo National University of Fine Arts and Music, 12-8 Ueno-koen, Taito-ku, Tokyo 110-8714 (Japan); Futamoto, Masaaki [Faculty of Science and Engineering, Chuo University, 1-13-27 Kasuga, Bunkyo-ku, Tokyo 112-8551 (Japan)

    2011-09-30

    Permalloy (Py) single-crystal films with bcc structure were obtained on GaAs(011){sub B3} single-crystal substrates by ultra high vacuum rf magnetron sputtering. The film growth and the detailed film structures were investigated by refection high energy electron diffraction and pole figure X-ray diffraction. bcc-Py films epitaxially grow on the substrates in the orientation relationship of Py(011)[011-bar]{sub bcc} || GaAs(011)[011-bar]{sub B3}. The lattice constant of bcc-Py film is determined to be a = 0.291 nm. With increasing the film thickness, parts of the bcc crystal transform into more stable fcc structure by atomic displacement parallel to the bcc{l_brace}011{r_brace} close-packed planes. The resulting film thus consists of a mixture of bcc and fcc crystals. The phase transformation mechanism is discussed based on the experimental results. The in-plane magnetization properties reflecting the magnetocrystalline anisotropy of bcc-Py crystal are observed for the Py films grown on GaAs(011){sub B3} substrates.

  2. Substrate type < 111 >-Cu{sub 2}O/<0001 >-ZnO photovoltaic device prepared by photo-assisted electrodeposition

    Energy Technology Data Exchange (ETDEWEB)

    Zamzuri, Mohd, E-mail: zamzuri@tf.me.tut.ac.jp [Department of Mechanical Eng., Toyohashi University of Technology, 1-1 Hibari Gaoka, Tempaku, Toyohashi, Aichi 441-8580 (Japan); School of Manufacturing Eng., Universiti Malaysia Perlis, Kampus Tetap Pauh Putra, Jln Arau-Changlun, 02600 Arau, Perlis (Malaysia); Sasano, Junji [Department of Mechanical Eng., Toyohashi University of Technology, 1-1 Hibari Gaoka, Tempaku, Toyohashi, Aichi 441-8580 (Japan); Mohamad, Fariza Binti [Faculty of Electrical & Electronic Eng., University Tun Hussein Onn Malaysia, 86400, Parit Raja, Batu Pahat, Johor (Malaysia); Izaki, Masanobu [Department of Mechanical Eng., Toyohashi University of Technology, 1-1 Hibari Gaoka, Tempaku, Toyohashi, Aichi 441-8580 (Japan)

    2015-11-30

    The substrate-type < 0001 > ZnO/<111 > Cu{sub 2}O photovoltaic (PV) device has been constructed by electrodeposition of a < 111 >-p-Cu{sub 2}O layer on an Au(111)/Si wafer substrate followed by stacking the n-ZnO layer by electrodeposition during light irradiation in aqueous solutions. The PV device was fabricated by stacking the Al:ZnO-window by sputtering and the top Al electrode by vacuum evaporation. The < 0001 >-ZnO layer was composed of aggregates of hexagonal columnar grains grown in the direction normal to the surface, and pores could be observed between the ZnO grains at the deposition time last 1800 s. The < 0001 >-ZnO/<111 >-Cu{sub 2}O PV device showed a photovoltaic performance under AM1.5 illumination, and showed the improved short-circuit current density of 5.87 mA cm{sup −2} by stacking the AZO-TCO due to the increase in the diffusion length of the carrier. - Highlights: • Substrate type ZnO/Cu{sub 2}O photovoltaic devices only by electrodeposition • ZnO layer was stacked on the Cu{sub 2}O layer by photo-assisted electrodeposition. • AZO/ZnO/Cu{sub 2}O photovoltaic devices with a short-circuit current density of 5.87 mA cm{sup −2}.

  3. Preparation of metastable bcc permalloy epitaxial thin films on GaAs(011)B3 single-crystal substrates

    International Nuclear Information System (INIS)

    Ohtake, Mitsuru; Higuchi, Jumpei; Yabuhara, Osamu; Kirino, Fumiyoshi; Futamoto, Masaaki

    2011-01-01

    Permalloy (Py) single-crystal films with bcc structure were obtained on GaAs(011) B3 single-crystal substrates by ultra high vacuum rf magnetron sputtering. The film growth and the detailed film structures were investigated by refection high energy electron diffraction and pole figure X-ray diffraction. bcc-Py films epitaxially grow on the substrates in the orientation relationship of Py(011)[011-bar] bcc || GaAs(011)[011-bar] B3 . The lattice constant of bcc-Py film is determined to be a = 0.291 nm. With increasing the film thickness, parts of the bcc crystal transform into more stable fcc structure by atomic displacement parallel to the bcc{011} close-packed planes. The resulting film thus consists of a mixture of bcc and fcc crystals. The phase transformation mechanism is discussed based on the experimental results. The in-plane magnetization properties reflecting the magnetocrystalline anisotropy of bcc-Py crystal are observed for the Py films grown on GaAs(011) B3 substrates.

  4. Cauliflower hillock formation through crystallite migration of SnO2 thin films prepared on alumina substrates by using MOCVD

    International Nuclear Information System (INIS)

    Choi, Gwangpyo; Ryu, Hyunwook; Lee, Woosun; Hong, Kwangjun; Shin, Dongcharn; Park, Jinseong; Seo, Yongjin; Akbar, Sheikh A.

    2003-01-01

    Tin-oxide thin films were deposited at 375 .deg. C on α-alumina substrates by using metalorganic chemical vapor deposition (MOCVD) process. A number of hillocks were formed on the film after annealing in air at 500 .deg. C for 30 min, but fewer hillocks were formed for annealing in N 2 . The hillocks on the film and the grains on the alumina substrate were composed of crystallites. The oxygen content and the binding energy after annealing in air came to close to values for the stoichiometric SnO 2 . There was no relationship between the film thickness and the binding energy shift, but the binding energy did change with the annealing atmosphere and the oxygen content. The cauliflower hillocks on the film seem to be formed by the continuous migration of crystallites from cauliflower grains on the substrate to release the stress due to the increased oxygen content and volume. A cauliflower hillock can be grown by continuous migration of crystallites from nearby grains to the hillock.

  5. The cultivation of the mushroom Agaricus bisporus (Champignon) and some environmental and health aspects.

    Science.gov (United States)

    Zicari, Giuseppe; Rivetti, Daniela; Soardo, Vincenzo; Cerrato, Elena

    2012-01-01

    The cultivation of the mushroom Agaricus bisporus, also known as button mushroom, requires the use of substrates for its cultivation, such as chicken and/or horse manure and the application of manufacturing steps, such as storage and composting that produce odours. The odours may cause disturbance to people living near the plant and may be a problem for workers. This article examines some measures that can be taken to reduce the odorous emissions during the production of Agaricus bisporus. The possibility of recovery of some organic matter left from the cultivation is examined. Finally, some occupational hazards for workers are highlighted.

  6. Economic assessment of mushroom project commercialisation

    International Nuclear Information System (INIS)

    Mat Rasol Awang; Rosnani Abdul Rashid; Hassan Hamdani Hassan Mutaat; Meswan Maskom

    2010-01-01

    The market value of mushroom is worth US $45 billion comprising: US $28-30 billion from food, US $9-10 billion from medicinal products and US $3.5-4 billion from wild mushroom. Malaysian import deficit of mushroom over the year 2001-2007 was 40,933 metric ton that worth of RM 187.7 million. The existing local market is lucrative and the potential world market is very large. Having cultivation technology in placed, understanding key value chains of cultivation technology processes, this paper assesses the case study of project economic of mushroom commercialization. (author)

  7. Cadmium determination in Lentinus edodes mushroom species

    Directory of Open Access Journals (Sweden)

    Vera Akiko Maihara

    2012-09-01

    Full Text Available Many studies have drawn attention to the occurrence and concentration of toxic elements found in the fruiting body of mushrooms. Some edible mushroom species are known to accumulate high levels of inorganic contaminants, mainly cadmium, mercury, and lead. There are about 2,000 known edible mushroom species, but only 25 of them are cultivated and used as food. In Brazil, the most marketed and consumed mushroom species are Agaricus bisporus, known as Paris champignon, Lentinus edodes, or Shitake and Pleurotus sp, also called Shimeji or Hiratake. In this study, the concentration of cadmium was determined in Lentinus edodes mushrooms from different cities in São Paulo state and some samples imported from Japan and China. The analyses were performed by graphite furnace atomic absorption spectrometry after HNO3-H2O2 digestion. The results showed a lower concentration of Cd in the mushrooms cultivated in São Paulo (0.0079 to 0.023 mg.kg-1 in natura than that of the mushrooms cultivated abroad (0.125 to 0.212 mg.kg-1 in natura. Although there is no tolerance limit for Cd in mushrooms in Brazil, the results show that Lentinus edodes mushrooms can be safely consumed.

  8. Effect of substrate roughness and working pressure on photocatalyst of N-doped TiOx films prepared by reactive sputtering with air

    International Nuclear Information System (INIS)

    Lee, Seon-Hong; Yamasue, Eiji; Okumura, Hideyuki; Ishihara, Keiichi N.

    2015-01-01

    Highlights: • Effect of substrate roughness and working pressure on the physical properties and the photocatalytic properties of the N-doped TiO x films are investigated. • Surface roughness of glass substrate has little influence on the film properties, but significant influence on the photocatalytic ability. • Working pressure has little influence on the produced phases and the atomic bonding configurations, but significant influence on the atomic concentration of the N-doped TiO x film. • High photocatalysis of N-doped TiO x film requires the permissible range of the N doping concentration which shows the interstitial complex N doping states in TiO 2 . - Abstract: N-doped TiO x films on the glass substrate were prepared by radio-frequency (RF) magnetron reactive sputtering of Ti target in a mixed gas of argon and dry air. The effect of substrate roughness and working pressure on the physical properties and the photocatalytic properties of the N-doped TiO x films was investigated. The surface roughness of glass substrate has little influence on the film properties such as produced phases, lattice parameters, introduced nitrogen contents, and atomic bonding configurations, but significant influence on the surface roughness of film resulting in the variation of the photocatalytic ability. The working pressure has little influence on the produced phases and the atomic bonding configurations, but significant influence on the atomic concentration of the N-doped TiO x film, resulting in the large variation of optical, structural, and photocatalytic properties. It is suggested that the high photocatalysis of N-doped TiO x film requires a certain range of the N doping concentration which shows the interstitial complex N doping states in TiO 2

  9. Use of a piezo-electric quartz as substrate for the preparation of self-supporting rare earth targets, in metallic form, not oxidized

    International Nuclear Information System (INIS)

    Bonetti, C.

    1975-01-01

    A technique for preparing rare earth self-supporting targets is described. These high purity foils are used for nuclear spectroscopy, with a tandem Van de Graaff accelerator. Target thicknesses range from 1000μg/cm 2 to 2500μg/cm 2 . The originality of this procedure consists in using the piezo-electric quartz for target thickness measurements and for temporary substrate. With this method, it is possible to measure the target thickness without geometrical errors and to suppress the effects of the molecular flux anisotropy. (Auth.)

  10. Biodegradation of hydrocarbons exploiting spent substrate from ...

    African Journals Online (AJOL)

    The aim of this study was to evaluate the mushroom substrate of P. ostreatus in a microcosm for the bioremediation of an agricultural soil contaminated with diesel. We evaluated the participation of microbial populations and specific enzymatic lacasses, manganese peroxidases, versatile peroxidases, veratryl alcohol ...

  11. Aquatic gilled mushrooms: Psathyrella fruiting in the Rogue River in southern Oregon.

    Science.gov (United States)

    Frank, Jonathan L; Coffan, Robert A; Southworth, Darlene

    2010-01-01

    A species of Psathyrella (Basidiomycota) with true gills has been observed fruiting underwater in the clear, cold, flowing waters of the upper Rogue River in Oregon. Fruiting bodies develop and mature in the main channel, where they are constantly submerged, and were observed fruiting over 11 wk. These mushrooms develop underwater, not on wood recently washed into the river. Substrates include water-logged wood, gravel and the silty riverbed. DNA sequences of the ITS region and a portion of the ribosomal large subunit gene place this fungus in Psathyrella sensu stricto near P. atomata, P. fontinalis and P. superiorensis. Morphological characters distinguish the underwater mushroom from previously described species. Fruiting bodies have long fibrillose stipes with small diameter caps. Immature stages have a thin veil that is soon lost. Gills lack reddish edges. Cystidia are ventricose with subacute apices. Spores were observed as wedge-shape rafts released into gas pockets below the caps. Underwater gills and ballistospores indicate a recent adaptation to the stream environment. This particular river habitat combines the characteristics of spring-fed flows and cold, aerated water with woody debris in shallow depths on a fine volcanic substrate. Based on molecular and morphological evidence we conclude that the underwater mushrooms are a new species, Psathyrella aquatica. This report adds to the biodiversity of stream fungi that degrade woody substrates. The underwater environment is a new habitat for gilled mushrooms.

  12. Mushroom tumor: a new disease on Flammulina velutipes caused by Ochrobactrum pseudogrignonense.

    Science.gov (United States)

    Wu, Zhipeng; Peng, Weihong; He, Xiaolan; Wang, Bo; Gan, Bingcheng; Zhang, Xiaoping

    2016-01-01

    Mushroom tumor on Flammulina velutipes has become the main disease during the off-season cultivation of F. velutipes while the causal organism has remained unknown. The present study was aimed at identifying the pathogen confirming its pathogenisity following Koch's Postulates, characterizing it using morphological, physiological, biochemical and molecular features, and studying its current distribution. We determined that mushroom tumor is a new bacterial infection disease caused by Ochrobactrum pseudogrignonense. It produces tumor-like structures on the surface of the substrate, and inhibits the formation of primordia and fruiting of F. velutipes. The molecular studies showed that this new pathogen is closely related to Ochrobactrum based on 16S rRNA sequences. This is the first time that Ochrobactrum has been shown to be a pathogen of a mushroom. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Preparation of CulnS2 Thin Films on the Glass Substrate by DC Sputtering for Solar Cell Component

    International Nuclear Information System (INIS)

    Bambang Siswanto; Wirjoadi; Darsono

    2007-01-01

    The CuInS 2 alloys were deposited on glass substrate using plasma DC sputtering technique. A CuInS 2 alloy target was made from Cu, In, Se powder with impurity of 99.998%. The deposition process was done with the following process parameter variations: deposition time and substrate temperature were the range of 15 to 45 min and 150 to 300 ℃, the gas pressure was kept at 1.4x10 -1 Torr. The purpose of the research is to obtain the solar cell component of CuInS 2 thin films. The electrical and optical properties measurement has been done by four-point probe and UV-Vis. Crystal structure was analyzed using X-ray diffraction (XRD). The result shows that minimum resistance of CuInS 2 thin films is 35.7 kΩ and optical transmittance is 14.7 %. The crystal structure of CuInS 2 is oriented at (112) plane and by Touc-plot method was obtained that the band gap energy of thin films is 1.45 eV. It could be concluded that the CuInS 2 thin film can be used as a solar cell component. (author)

  14. Structure, apatite inducing ability, and corrosion behavior of chitosan/halloysite nanotube coatings prepared by electrophoretic deposition on titanium substrate.

    Science.gov (United States)

    Molaei, A; Amadeh, A; Yari, M; Reza Afshar, M

    2016-02-01

    In this study chitosan/halloysite nanotube composite (CS/HNT) coatings were deposited by electrophoretic deposition (EPD) on titanium substrate. Using HNT particles were investigated as new substituents for carbon nanotubes (CNTs) in chitosan matrix coatings. The ability of chitosan as a stabilizing, charging, and blending agent for HNT particles was exploited. Furthermore, the effects of pH, electrophoretic bath, and sonicating duration were studied on the deposition of suspensions containing HNT particles. Microstructure properties of coatings showed uniform distribution of HNT particles in chitosan matrix to form smooth nanocomposite coatings. The zeta potential results revealed that at pH around 3 there is an isoelectric point for HNT and it would have cathodic and anionic states at pH values less and more than 3, respectively. Therefore, CS/HNT composite deposits were produced in the pH range of 2.5 to 3. The apatite inducing ability of chitosan-HNT composite coating assigned that HNT particles were biocompatible because they formed carbonated hydroxyapatite particles on CS/HNT coating in corrected simulated body fluid (C-SBF). Finally, electrochemical corrosion characterizations determined that corrosion resistance in CS/HNT coating has been improved compared to bare titanium substrate. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Substrate Temperature Effect on Charge Transport Performance of ZnO Electron Transport Layer Prepared by a Facile Ultrasonic Spray Pyrolysis in Polymer Solar Cells

    Directory of Open Access Journals (Sweden)

    Jiang Cheng

    2015-01-01

    Full Text Available A novel ultrasonic spray pyrolysis for high-quality ZnO films based on zinc-ammonia solution was achieved in air. To investigate the structural and optical properties as well as the performance of polymer solar cells (PSCs, ZnO films at different substrate temperatures and thicknesses were prepared. The performance of poly(3-hexylthiophene:[6,6]-phenyl C61-butyric acid methyl ester (P3HT:PCBM based PSC was found to be improved due to the ZnO films. The crystal structure and roughness of the ZnO films fabricated at different temperatures were found to affect the performance of PSCs. The optimized power conversion efficiency was found to be maximum for PSCs with ZnO films prepared at 200°C. The growth process of these ZnO films is very simple, cost-effective, and compatible for larger-scale PSC preparation. The precursor used for spray pyrolysis is environmentally friendly and helps to achieve ZnO film preparation at a relative low temperature.

  16. Uniformity and passivation research of Al2O3 film on silicon substrate prepared by plasma-enhanced atom layer deposition.

    Science.gov (United States)

    Jia, Endong; Zhou, Chunlan; Wang, Wenjing

    2015-01-01

    Plasma-enhanced atom layer deposition (PEALD) can deposit denser films than those prepared by thermal ALD. But the improvement on thickness uniformity and the decrease of defect density of the films deposited by PEALD need further research. A PEALD process from trimethyl-aluminum (TMA) and oxygen plasma was investigated to study the influence of the conditions with different plasma powers and deposition temperatures on uniformity and growth rate. The thickness and refractive index of films were measured by ellipsometry, and the passivation effect of alumina on n-type silicon before and after annealing was measured by microwave photoconductivity decay method. Also, the effects of deposition temperature and annealing temperature on effective minority carrier lifetime were investigated. Capacitance-voltage and conductance-voltage measurements were used to investigate the interface defect density of state (D it) of Al2O3/Si. Finally, Al diffusion P(+) emitter on n-type silicon was passivated by PEALD Al2O3 films. The conclusion is that the condition of lower substrate temperature accelerates the growth of films and that the condition of lower plasma power controls the films' uniformity. The annealing temperature is higher for samples prepared at lower substrate temperature in order to get the better surface passivation effects. Heavier doping concentration of Al increased passivation quality after annealing by the effective minority carrier lifetime up to 100 μs.

  17. Attraction, Oviposition and Larval Survival of the Fungus Gnat, Lycoriella ingenua, on Fungal Species Isolated from Adults, Larvae, and Mushroom Compost

    Science.gov (United States)

    Cloonan, Kevin R.; Andreadis, Stefanos S.; Chen, Haibin; Jenkins, Nina E.; Baker, Thomas C.

    2016-01-01

    We previously showed that the females of the mushroom sciarid, Lycoriella ingenua (Dufour, 1839) (Diptera: Sciaridae), one of the most severe pests of the cultivated white button mushroom, Agaricus bisporus (J.E. Lange) Emil J. Imbach (Agaricales: Agaricaceae), are attracted to the mushroom compost that mushrooms are grown on and not to the mushrooms themselves. We also showed that females are attracted to the parasitic green mold, Trichoderma aggressivum. In an attempt to identify what is in the mushroom compost that attracts female L. ingenua, we isolated several species of fungi from adult males and females, third instar larvae, and mushroom compost itself. We then analyzed the attraction of females to these substrates using a static-flow two choice olfactometer, as well as their oviposition tendencies in another type of assay under choice and no-choice conditions. We also assessed the survival of larvae to adulthood when first instar larvae were placed on each of the isolated fungal species. We found that female flies were attracted most to the mycoparasitic green mold, T. aggressivum, to Penicilium citrinum isolated from adult female bodies, and to Scatylidium thermophilium isolated from the mushroom compost. Gravid female flies laid the most eggs on T. aggressivum, Aspergillus flavus isolated from third instar larval frass, Aspergillus fumigatus isolated from adult male bodies, and on P. citrinum. This egg-laying trend remained consistent under no-choice conditions as females aged. First instar larvae developed to adulthood only on S. thermophilium and Chaetomium sp. isolated from mushroom compost, and on P. citrinum. Our results indicate that the volatiles from a suite of different fungal species act in tandem in the natural setting of mushroom compost, with some first attracting gravid female flies and then others causing them to oviposit. The ecological context of these findings is important for creating an optimal strategy for using possible

  18. Fresh-keeping of mushroom by irradiation

    International Nuclear Information System (INIS)

    Liu Chao; Xu Hongqing; Wang Hong; Cai Jian

    2003-01-01

    The effect of 60 Co γ irradiation on the preservation of Agaricus bisporus were studied. The results showed that after irradiation the mushroom had lower rates of membrane split, opening of pilei, browning, decomposition and lose of fresh weight. The fresh keeping period of mushroom irradiated with 1.2 kGy and stored at 4 degree C was prolonged to 30 days

  19. Accuracy of sampling during mushroom cultivation

    NARCIS (Netherlands)

    Baars, J.J.P.; Hendrickx, P.M.; Sonnenberg, A.S.M.

    2015-01-01

    Experiments described in this report were performed to increase the accuracy of the analysis of the biological efficiency of Agaricus bisporus strains. Biological efficiency is a measure of the efficiency with which the mushroom strains use dry matter in the compost to produce mushrooms (expressed

  20. 7 CFR 1209.11 - Mushrooms.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Mushrooms. 1209.11 Section 1209.11 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... CONSUMER INFORMATION ORDER Mushroom Promotion, Research, and Consumer Information Order Definitions § 1209...

  1. Temperature Control System for Mushroom Dryer

    Science.gov (United States)

    Wibowo, I. A.; Indah, Nur; Sebayang, D.; Adam, N. H.

    2018-03-01

    The main problem in mushroom cultivation is the handling after the harvest. Drying is one technique to preserve the mushrooms. Traditionally, mushrooms are dried by sunshine which depends on the weather. This affects the quality of the dried mushrooms. Therefore, this paper proposes a system to provide an artificial drying for mushrooms in order to maintain their quality. The objective of the system is to control the mushroom drying process to be faster compared to the natural drying at an accurate and right temperature. A model of the mushroom dryer has been designed, built, and tested. The system comprises a chamber, heater, blower, temperature sensor and electronic control circuit. A microcontroller is used as the controller which is programmed to implement a bang-bang control that regulates the temperature of the chamber. A desired temperature is inputted as a set point of the control system. Temperature of 45 °C is chosen as the operational drying temperature. Several tests have been carried out to examine the performance of the system including drying speed, the effects of ambient conditions, and the effects of mushroom size. The results show that the system can satisfy the objective.

  2. The directed preparation of TiO2 nanotubes film on FTO substrate via hydrothermal method for gas sensing application

    Directory of Open Access Journals (Sweden)

    Pham Van Viet

    2016-04-01

    Full Text Available In this research, we directly synthesized TiO2 nanotubes film on Fluorine doped Tin oxide (FTO substrate via hydrothermal method from commercial TiO2 in NaOH solution at 135 ℃ for 24 hours. The samples were characterized by X-ray diffraction (XRD pattern, field emission scanning electron microscopy (FESEM and transmitting electron microscopy (TEM. The average diameter of TiO2 nanotubes (TNTs is about 10–12 nm and their length is about a few hundred nanometers. The sensitivity ability of TNTs increases as the gas concentration increases and developing to the highest sensitivity of TNTs is 2.4 at 700 ppm of the ethanol concentration. The same as the gas concentration, the sensitivity of TNTs increases when the temperature increases. Besides, the sensitivity of samples at 250 ℃ is doubled compared to samples determined at 100 ℃.

  3. Characterisation of NdFeB thin films prepared on (100)Si substrates with SiO2 barrier layers

    International Nuclear Information System (INIS)

    Sood, D.K.; Muralidhar, G.K.

    1998-01-01

    This work presents a systematic study of the deposition and characterization of NdFeB films on substrates of Si(100) and of SiO2 layer thermally grown on Si(100) held at RT, 360 deg C or 440 deg C. The post-deposition annealing is performed at 600 or 800 deg C in vacuum. The films are characterised using the analytical techniques of RBS, SIMS, XRD, OM and SEM. Results indicate that SiO2 is, in deed, an excellent diffusion barrier layer till 600 deg C but becomes relatively less effective at 800 deg C. Without this barrier layer, interdiffusion at the Si-NdFeB film interface leads to formation of iron silicides, α-Fe and B exclusion from the diffusion zone, in competition with the formation of the magnetic NdFeB phase. (authors)

  4. Optimization of the cultivation conditions for mushroom production with European wild strains of Agaricus subrufescens and Brazilian cultivars.

    Science.gov (United States)

    Llarena-Hernández, Carlos R; Largeteau, Michèle L; Ferrer, Nathalie; Regnault-Roger, Catherine; Savoie, Jean-Michel

    2014-01-15

    The almond mushroom Agaricus subrufescens (formerly Agaricus blazei or Agaricus brasiliensis) is cultivated at commercial level in Brazil and some Asian countries on local substrates and casing mixtures. Despite its tropical origin, A. subrufescens might be a seasonal option for mushroom growers in western countries, where some wild strains have been isolated. For this purpose, cultivation conditions were developed starting from the substrate and casing mixture commonly used for commercial production of the button mushroom Agaricus bisporus in France. The commercial compost, based on wheat straw and horse manure, used for A. bisporus and the casing mixture (peat and limestone) supplemented with fine sand proved efficient to grow A. subrufescens. Increasing the depth of the casing layer improved significantly the yield and time to fruiting. Daily variations in temperature did not markedly modify the yield. Significantly higher mushroom biomass was obtained with three wild European strains compared with three Brazilian cultivars. The very productive wild strain CA438-A gave mushrooms of size and dry matter content comparable to those of a cultivar. Commercial production of A. subrufescens can be developed in western countries on the wheat straw-based substrate commonly used for A. bisporus in these regions, by a simple modification of the casing mixture and maintaining the incubation temperature throughout the crop, which is expected to save energy during summer. Good yields were obtained cultivating European strains under optimised parameters. © 2013 Society of Chemical Industry.

  5. Phenylhydrazines in the cultivated mushroom (Agaricus bisporus)

    DEFF Research Database (Denmark)

    Andersson, H. C.; Gry, Jørn

    2004-01-01

    In 1991, the Nordic Working Group on Food Toxicology and Risk Evaluation (NNT) reviewed the available data on phenylhydrazines naturally occurring in the cultivated mushroom. It was concluded that the mushroom may contain about 500 mg of the hydrazine derivatives per kg fresh weight. The hydrazine...... derivatives as well as extracts of the cultivated mushroom were mutagenic to a variable degree in most of the reported short-term tests. The raw mushroom and several of the hydrazines induced tumours when administered to Swiss mice as reported by American scientists. However, reservations were expressed...... as to the design of the studies. Based on this review, and due to the concern expressed, a Nordic project (coordinated by Jørn Gry, Danish Veterinary and Food Administration) was initiated dealing with toxicological and chemical studies on the cultivated mushroom and its phenylhydrazine derivatives in order...

  6. Mushroom immunomodulators: unique molecules with unlimited applications.

    Science.gov (United States)

    El Enshasy, Hesham A; Hatti-Kaul, Rajni

    2013-12-01

    For centuries, mushrooms have been used as food and medicine in different cultures. More recently, many bioactive compounds have been isolated from different types of mushrooms. Among these, immunomodulators have gained much interest based on the increasing growth of the immunotherapy sector. Mushroom immunomodulators are classified under four categories based on their chemical nature as: lectins, terpenoids, proteins, and polysaccharides. These compounds are produced naturally in mushrooms cultivated in greenhouses. For effective industrial production, cultivation is carried out in submerged culture to increase the bioactive compound yield, decrease the production time, and reduce the cost of downstream processing. This review provides a comprehensive overview on mushroom immunomodulators in terms of chemistry, industrial production, and applications in medical and nonmedical sectors. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Mushroom flora and associated insect fauna in Nsukka Urban ...

    African Journals Online (AJOL)

    The mushroom flora and associated insect pests of mushrooms in Nsukka urban was studied. The abundance of mushrooms from sampled communites is indicaed with the family, Agaricaceae predominating “out of home” environment yielded more mushrooms (4.62) than the homestead environment (3.26). Insect pests ...

  8. Current Overview of Mushroom Production in the World

    NARCIS (Netherlands)

    Royse, Daniel J.; Baars, J.J.P.; Tan, Qi

    2017-01-01

    Edible, medicinal, and wild mushrooms are the three major components of the global mushroom industry. World production of cultivated, edible mushrooms has increased more than 30‐fold since 1978. China is the main producer of cultivated, edible mushrooms. Lentinus edodes is now the world's leading

  9. Efficiency of treatments for controlling Trichoderma spp during spawning in cultivation of lignicolous mushrooms.

    Science.gov (United States)

    Colavolpe, María Belén; Mejía, Santiago Jaramillo; Albertó, Edgardo

    2014-01-01

    Trichoderma spp is the cause of the green mold disease in mushroom cultivation production. Many disinfection treatments are commonly applied to lignocellulose substrates to prevent contamination. Mushroom growers are usually worried about the contaminations that may occur after these treatments during handling or spawning. The aim of this paper is to estimate the growth of the green mold Trichoderma sp on lignocellulose substrates after different disinfection treatments to know which of them is more effective to avoid contamination during spawning phase. Three different treatments were assayed: sterilization (121 °C), immersion in hot water (60 and 80 °C), and immersion in alkalinized water. Wheat straw, wheat seeds and Eucalyptus or Populus sawdust were used separately as substrates. After the disinfection treatments, bagged substrates were sprayed with 3 mL of suspension of conidia of Trichoderma sp (10(5) conidia/mL) and then separately spawned with Pleurotus ostreatus or Gymnopilus pampeanus. The growth of Trichoderma sp was evaluated based on a qualitative scale. Trichoderma sp could not grow on non-sterilized substrates. Immersions in hot water treatments and immersion in alkalinized water were also unfavorable treatments for its growth. Co- cultivation with mushrooms favored Trichoderma sp growth. Mushroom cultivation disinfection treatments of lignocellulose substrates influence on the growth of Trichoderma sp when contaminations occur during spawning phase. The immersion in hot water at 60 °C for 30 min or in alkalinized water for 36 h, are treatments which better reduced the contaminations with Trichoderma sp during spawning phase for the cultivation of lignicolous species.

  10. TiO{sub 2} based photo-catalysts prepared by chemical vapor infiltration (CVI) on micro-fibrous substrates; Photocatalyseurs a base de TiO{sub 2} prepares par infiltration chimique en phase vapeur (CVI) sur supports microfibreux

    Energy Technology Data Exchange (ETDEWEB)

    Sarantopoulos, Ch

    2007-10-15

    This thesis deals with micro-fibrous glass substrates functionalized with TiO{sub 2}. The oxide is deposited as a thin film onto the micro fibres by chemical vapour infiltration (CVI), yielding a photo-catalytic material usable for cleaning polluted air. We studied the relation between the structure of the material and its photo-catalytic efficiency. TiO{sub 2} thin films were prepared at low pressure, in a hot-wall CVD reactor, using Ti(O-iPr){sub 4} as a precursor. They were characterized by XRD, SEM, EDX, XPS and BET, and by recording the kinetics of decomposition of varied pollutants in solution (orange G, malic acid, imazapyr) and in air (toluene). The conditions favoring the growth of porous films through a columnar growth mode were established by MOCVD-depositing TiO{sub 2} thin films on flat substrates. The subsequent works with micro fibrous thick substrates showed the uniformity of infiltration to be the main factor governing the photo-catalytic efficiency. Operating parameters that optimize infiltration do not yield columnar growth mode. A compromise is necessary. Our photo-catalysts are showing high efficiency comparable, if not higher, to those actually commercialized. These promising results are opening real perspectives for the proposed process. (author)

  11. The effects of commercial preparations of herbal supplements commonly used by women on the biotransformation of fluorogenic substrates by human cytochromes P450.

    Science.gov (United States)

    Ho, Shirley H Y; Singh, Mohini; Holloway, Alison C; Crankshaw, Denis J

    2011-07-01

    The study set out to determine the potential for commercially available preparations of black cohosh (Actaea racemosa), chaste tree berry (Vitex agnus-castus), crampbark (Viburnum opulus) and false unicorn (Chamaelirium luteum) to inhibit the major human drug metabolizing enzymes CYP1A2, CYP2C9, CYP2C19, CYP2D6 and CYP3A4 as well as CYP1A1 which activates some carcinogens. In vitro microplate-based assays using cDNA-expressed CYP450 isoforms and fluorogenic substrates were used. Components of the commercial herbal preparations interfered with the assays and limited the concentration ranges that could be tested. Nevertheless, the fluorogenic assays were robust, reproducible and easy to perform and thus are still useful for initial screening for potential herb-drug interactions. None of the preparations affected CYPs 1A1 or 2C9 at the concentrations tested but all preparations inhibited some of the enzymes with potencies around 1 μg/mL. The three most potent interactions were: chaste tree berry and CYP2C19 (IC₅₀) 0.22 μg/mL); chaste tree berry and CYP3A4 (IC₅₀) 0.3 μg/mL); black cohosh and CYP2C19 (IC₅₀) 0.37 μg/mL,). Thus, the study successfully identified the potential for the commercial herbal preparations to inhibit human drug metabolizing enzymes. Whether this potential translates into clinically significant herb-drug interactions can only be confirmed by appropriate in vivo studies. Copyright © 2011 John Wiley & Sons, Ltd.

  12. Surface microstructure and cell biocompatibility of silicon-substituted hydroxyapatite coating on titanium substrate prepared by a biomimetic process

    International Nuclear Information System (INIS)

    Zhang Erlin; Zou Chunming; Yu Guoning

    2009-01-01

    Silicon-substituted hydroxyapatite (Si-HA) coatings with 0.14 to 1.14 at.% Si on pure titanium were prepared by a biomimetic process. The microstructure characterization and the cell compatibility of the Si-HA coatings were studied in comparison with that of hydroxyapatite (HA) coating prepared in the same way. The prepared Si-HA coatings and HA coating were only partially crystallized or in nano-scaled crystals. The introduction of Si element in HA significantly reduced P and Ca content, but densified the coating. The atom ratio of Ca to (P + Si) in the Si-HA coatings was in a range of 1.61-1.73, increasing slightly with an increase in the Si content. FTIR results displayed that Si entered HA in a form of SiO 4 unit by substituting for PO 4 unit. The cell attachment test showed that the HA and Si-HA coatings exhibited better cell response than the uncoated titanium, but no difference was observed in the cell response between the HA coating and the Si-HA coatings. Both the HA coating and the Si-HA coatings demonstrated a significantly higher cell growth rate than the uncoated pure titanium (p < 0.05) in all incubation periods while the Si-HA coating exhibited a significantly higher cell growth rate than the HA coating (p < 0.05). Si-HA with 0.42 at.% Si presented the best cell biocompatibility in all of the incubation periods. It was suggested that the synthesis mode of HA and Si-HA coatings in a simulated body environment in the biomimetic process contribute significantly to good cell biocompatibility

  13. A facile and cost-effective approach to engineer surface roughness for preparation of large-scale superhydrophobic substrate with high adhesive force

    Science.gov (United States)

    Zhou, Bingpu; Tian, Jingxuan; Wang, Cong; Gao, Yibo; Wen, Weijia

    2016-12-01

    This study presents a convenient avenue to fabricate polydimethylsiloxane (PDMS) with controllable surface morphologies and wetting characteristics via standard molding technique. The templates with engineered surface roughness were simply prepared by combinations of microfluidics and photo-polymerization of N-Isopropylacrylamide (NIPAM). The surface morphology of mold could be adjusted via ultraviolet-curing duration or the grafting density, which means that the surface of PDMS sample replicated from the mold could also be easily controlled based on the proposed method. Furthermore, via multiple grafting and replication processes, we have successfully demonstrated that hydrophobicity properties of prepared PDMS samples could be swiftly enhanced to ∼154° with highly adhesive force with resident water droplets. The obtained PDMS samples exhibited well resistance to external mechanical deformation even up to 100 cycles. The proposed scheme is timesaving, cost-effective and suitable for large-scale production of superhydrophobic PDMS substrates. We believe that the presented approach can provide a promising method for preparing superhydrophobic surface with highly adhesive force for on-chip liquid transport, localized reaction, etc.

  14. Comparative study of mycelial growth and basidiomata formation in seven different species of the edible mushroom genus Hericium.

    Science.gov (United States)

    Ko, Han Gyu; Park, Hyuk Gu; Park, Sang Ho; Choi, Chang Won; Kim, Seong Hwan; Park, Won Mok

    2005-09-01

    The potential of using several agricultural by-products as supplements of sawdust substrate for the production of edible mushroom Hericium was evaluated using seven Hericium species. All the tested supplements (rice bran, wheat bran, barley bran, Chinese cabbage, egg shell, and soybean powder) were found to be suitable for the mycelial growth of all the tested species. In mycelial growth, soybean powder was the best supplement for Hericium americanum, Hericium coralloides, and Hericium erinaceum while barley bran was the best for Hericium alpestre, Hericium laciniatum, and Hericium erinaceus. For Hericium abietis, rice bran and Chinese cabbage was the best. The possibility of mushroom production on oak sawdust substrate with 20% rice bran supplement was demonstrated with H. coralloides, H. americanum, H. erinaceus, and H. erinaceum which showed 26-70% biological efficiency. Our results also showed that strain selection is important to improve biological efficiency and mushroom yield in Hericium cultivation.

  15. Oil palm empty fruit bunch as media for mushroom cultivation

    International Nuclear Information System (INIS)

    Mat Rasol Awang; Wan Badrin Wan Husin; Tajuddin Osman; Tamikazu Kume; Shinpei Matsuhashi

    1998-01-01

    The mushroom strains Pleurotus sajor caju(grey oyster mushroom), Pleurotus flavellatus((pink oyster mushroom), Pleurotus cystidiosus(abalone mushroom) and Auricularia polytricha (black jelly mushroom) grow satisfactorily on the EFB media treated with lime. Based on their Biological Efficiency (BE) or yield, the strain Pleurotus sajor caju was selected for further investigation. The BE of the Pleurotus sajor caju was 73.8 %. The lime treatment, aeration and four weeks incubation period was necessary for fruiting

  16. INTENSIFICATION OF JELLY MUSHROOM CULTIVATION IN PAKEM SLEMAN

    OpenAIRE

    Sulistiya; Retno Lantarsih; Titop Dwiwinarno*

    2015-01-01

    Mushroom cultivation is long enough to be a source of income for some people in Pakem, Sleman. However, cultivation techniques that do not yet meet the standards for technical, so that productivity is still low. Marketing mushrooms are limited to the traditional market. Waste mushroom has not been used well, so potentially to pollute the environment mushroom. This service activities include the provision of mushroom cultivation equipment, such as water pumps and termohygrome...

  17. Performance of mushroom fruiting for large scale commercial production

    International Nuclear Information System (INIS)

    Mat Rosol Awang; Rosnani Abdul Rashid; Hassan Hamdani Mutaat; Mohd Meswan Maskom

    2012-01-01

    The paper described the determination of mushroom fruiting yield, which is vital to economics of mushroom production. Consistency in mushroom yields enabling an estimation to be made for revenues and hence profitability could be predicted. It has been reported by many growers, there are a large variation in mushroom yields over different times of production. To assess such claims we have run four batches of mushroom fruiting and the performance fruiting body productions are presented. (author)

  18. Entomopathogenic nematodes for the control of phorid and sciarid flies in mushroom crops

    Directory of Open Access Journals (Sweden)

    María Jesús Navarro

    2014-01-01

    Full Text Available The objective of this work was to evaluate the efficacy of two nematodes, Steinernema feltiae and S. carpocapsae, to control mushroom flies and to evaluate the effect of these treatments on Agaricus bisporus production. Two mushroom cultivation trials were carried out in controlled conditions, in substrate previously infested with the diptera Megaselia halterata and Lycoriella auripila, with two treatments: 106infective juveniles (IJ per square meter of S. feltiae and 0.5x106IJ m-2S. feltiae + 0.5x106IJ m-2S. carpocapsae. Another experiment was carried out using the same treatments to evaluate the possible nematode effect on mushroom yield. The number of adults emerging from the substrate was evaluated for each fly species. No decrease in the population of M. halterata was detected with nematode application, whereas the number of L. auripila was reduced in both treatments, particularly in the individual treatment with S. feltiae. The application of entomopathogenic nematodes has no adverse effect on mushroom production.

  19. A CTAB Procedure Of Total Genomic DNA Extraction For Medicinal Mushrooms

    International Nuclear Information System (INIS)

    Azhar Mohamad; Muhammad Hussaini Mohd Mustafa; Muhammad Hanif Azhari Noor; Rosnani Abdul Rashid; Hasan Hamdani Hasan Mutaat; Meswan Meskom; Mat Rasol Awang

    2014-01-01

    Medicinal mushroom is defined as mushrooms used in medicine or medical research. Isolation of intact, high-molecular-mass genomic DNA is essential for many molecular biology applications including Polymerase Chain Reaction (PCR), endonuclease restriction digestion, Southern blot analysis, and genomic library construction. The most important and prerequisite towards reliable molecular biology work is the total genomic DNA of a sample must be in good quality. Five freshly samples of medicinal mushroom were used in this work known as Auriculariapolytricha, Lentinus edode, Pleurotus sayorcaju, Sczhizopyllum commune and Ganodermalucidum. 5 mg of each sample were used to extraction the DNA, prepared in 3 replications and repeated twice. PCR based technique by using ISSR markers were used in checking the amplification ability of the total genomic extraction. A standard Doyle and Doyle protocol for genomic DNA extraction was modified in optimizing the total genomic DNA from the medicinal mushroom.The modification parameters were percentage of CTAB, incubation period and temperature. The results reveal that each sample required a certain combinations of time and period of incubation. Besides, percentage of CTAB in the buffer was found significant in giving a high yielding of extracted total genomic DNA. The extracted total genomic DNA from the medicinal mushroom yielded from 39.7 ng/ μl to 919.1 ng/ μl. The different yield among the samples found to be corresponded to polysaccharide content in the medicinal mushrooms. The objective of this works is to optimize total genomic DNA extraction of medicinal mushrooms towards a high quality intact genomic DNA for molecular activities. (author)

  20. Effect of spent mushroom substrate on the growth performance and ...

    African Journals Online (AJOL)

    The study was conducted at the rabbitary unit of the department of animal production, School of Agriculture, Lagos state polytechnic, Lagos. A total of twenty-four rabbits ... Performance was evaluated based on feed intake, live weight gain, feed conversion ratio, protein intake and protein efficiency ratio. The economy of ...

  1. Effects of Ganoderma lucidum Spent Mushroom Substrate Extract on ...

    African Journals Online (AJOL)

    Conclusion: The results suggest that when utilized as a feed additive, HWE may enhance immunity ... for healthy food, and are thought to improve .... Table 2: Composition and nutrient level of Total Mixed Rations (TMR) as the basal diet for the dairy cows .... IgG, IgA and IgM) are important biologically active milk protein.

  2. Antioxidant activities of kombucha prepared from three different substrates and changes in content of probiotics during storage

    Directory of Open Access Journals (Sweden)

    Caili Fu

    2014-03-01

    Full Text Available Kombucha is a health-promoting fermented beverage worldwide. The present study compared the free-radical scavenging abilities and total reducing power (TRP of kombucha prepared from low-cost green tea (LGTK, black tea (BTK, and tea powder (TPK. LGTK had the highest scavenging abilities against 2,2-diphenyl-1-picrylhydrazyl (DPPH, superoxide anion and hydroxyl radicals, while BTK showed the highest TRP. Changes in content of probiotics in LGTK were investigated during storage as well. The number of acetic acid bacteria decreased moderately up to 10 days of storage. The number of lactic acid bacteria (LAB decreased significantly, and their survival rate was only 0.98% at the 8th day of storage.

  3. Nd3-xBixFe4GaO12 (x = 2, 2.5 films on glass substrates prepared by MOD method

    Directory of Open Access Journals (Sweden)

    Yoshida T.

    2014-07-01

    Full Text Available We studied Nd3-XBiXFe4GaO12 films to obtain perpendicular magnetic anisotropy as well as large Faraday effect. NdBi2Fe4GaO12 (Bi2:NIGG and Nd0.5Bi2.5Fe4GaO12 (Bi2.5:NIGG films were obtained on Nd2BiFe4GaO12 (Bi1:NIGG layer prepared on glass substrates by metal-organic decomposition (MOD method. Bi2:NIGG and Bi2.5:NIGG films showed large Faraday rotation angles of 7.5 and 10.5 degree/µm, at a wavelength of 520 nm, respectively. Those films have perpendicular magnetic anisotropy with a coercivity of 350 Oe and a saturation magnetic field of 730 Oe.

  4. Effects of electrical conductivity of substrate materials on microstructure of diamond-like carbon films prepared by bipolar-type plasma based ion implantation

    International Nuclear Information System (INIS)

    Nakao, S; Sonoda, T

    2013-01-01

    Diamond-like carbon (DLC) films are prepared by a bipolar-type plasma based ion implantation, and the structural differences between DLC films deposited on different electrical conductive substrates, i.e., conductive Si wafers and insulating glass plates are examined by Raman spectroscopy and x-ray photo emission spectroscopy (XPS). In the Raman measurements, graphite (G) and disorder (D) peaks are observed for both samples. However, the additional photo luminescence is overlapped on the spectra in the case of on-glass sample. To elucidate the structural difference, the intensity ratio of D to G peak (I(D)/I(G)), G peak position and full width at half maximum (FWHM) are obtained by curve fitting using Gaussian function and linear baseline. It is found that the I(D)/I(G) is lower, G peak position is higher and FWHM of G peak is narrower for on-glass sample than for on-Si sample. According to Robertson [1], lower I(D)/I(G) seems more sp 3 C-C bonding in amount for on-glass sample. In contrast, higher G peak position and narrower FWHM of G peak suggest less sp 3 C-C bonding in amount for on-glass sample. The results of XPS analysis with C1s spectra reveal that sp 3 ratio, i.e., the intensity ratio of sp 3 /(sp 3 +sp 2 ) is smaller for on-glass sample than for on-Si sample. The inconsistency of the trend between I(D)/I(G) and other parameters (G peak position and FWHM of G peak) might be caused by the overlap of photo luminescence signal on Raman spectrum as to on-glass sample. From these results, it is considered that sp 3 C-C bonding is reduced in amount when using insulating substrate in comparison with conductive substrate.

  5. In-situ preparation of Fe{sub 2}O{sub 3} hierarchical arrays on stainless steel substrate for high efficient catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Zeheng, E-mail: zehengyang@hfut.edu.cn [School of Chemistry and Chemical Engineering, Anhui Key Laboratory of Controllable Chemical Reaction & Material Chemical Engineering, Hefei University of Technology, Hefei, Anhui 230009 (China); Wang, Kun; Shao, Zongming; Tian, Yuan [School of Chemistry and Chemical Engineering, Anhui Key Laboratory of Controllable Chemical Reaction & Material Chemical Engineering, Hefei University of Technology, Hefei, Anhui 230009 (China); Chen, Gongde [Department of Chemical and Environmental Engineering, University of California at Riverside, Riverside, CA 92521 (United States); Wang, Kai; Chen, Zhangxian; Dou, Yan [School of Chemistry and Chemical Engineering, Anhui Key Laboratory of Controllable Chemical Reaction & Material Chemical Engineering, Hefei University of Technology, Hefei, Anhui 230009 (China); Zhang, Weixin, E-mail: wxzhang@hfut.edu.cn [School of Chemistry and Chemical Engineering, Anhui Key Laboratory of Controllable Chemical Reaction & Material Chemical Engineering, Hefei University of Technology, Hefei, Anhui 230009 (China)

    2017-02-15

    Hierarchical array catalysts with micro/nano structures on substrates not only possess high reactivity from large surface area and suitable interface, but intensify mass transfer through shortening the diffusion paths of both reactants and products for high catalytic efficiency. Herein, we first demonstrate fabrication of Fe{sub 2}O{sub 3} hierarchical arrays grown on stainless-steel substrates via in-situ hydrothermal chemical oxidation followed by heat treatment in N{sub 2} atmosphere. As a Fenton-like catalyst, Fe{sub 2}O{sub 3} hierarchical arrays exhibit excellent catalytic activity and life cycle performance for methylene blue (MB) dye degradation in aqueous solution in the presence of H{sub 2}O{sub 2}. The Fe{sub 2}O{sub 3} catalyst with unique hierarchical structures and efficient transport channels, effectively activates H{sub 2}O{sub 2} to generate large quantity of • OH radicals and highly promotes reaction kinetics between MB and • OH radicals. Immobilization of hierarchical array catalysts on stainless-steel can prevent particles agglomeration, facilitate the recovery and reuse of the catalysts, which is expected promising applications in wastewater remediation. - Graphical abstract: The in-situ synthesis of Fe{sub 2}O{sub 3} hierarchical arrays on stainless-steel substrates was reported for the first time, which exhibit excellent catalytic activity performance for methylene blue (MB) dye degradation in aqueous solution in the presence of H{sub 2}O{sub 2}. - Highlights: • Fe{sub 2}O{sub 3} hierarchical arrays was prepared by in-situ hydrothermal chemical oxidation. • F{sup −} ions play an important role in the formation of the Fe{sub 2}O{sub 3} hierarchical arrays. • Fe{sub 2}O{sub 3} hierarchical arrays show high catalytic activity to methylene blue degradation.

  6. Physical Properties of ZnO Thin Films Codoped with Titanium and Hydrogen Prepared by RF Magnetron Sputtering with Different Substrate Temperatures

    Directory of Open Access Journals (Sweden)

    Fang-Hsing Wang

    2015-01-01

    Full Text Available Transparent conducting titanium-doped zinc oxide (TZO thin films were prepared on glass substrates by RF magnetron sputtering using 1.5 wt% TiO2-doped ZnO as the target. Electrical, structural, and optical properties of films were investigated as a function of H2/(Ar + H2 flow ratios (RH and substrate temperatures (TS. The optimal RH value for achieving high conducting TZO:H thin film decreased from 10% to 1% when TS increased from RT to 300°C. The lowest resistivity of 9.2×10-4 Ω-cm was obtained as TS=100°C and RH=7.5%. X-ray diffraction patterns showed that all of TZO:H films had a hexagonal wurtzite structure with a preferred orientation in the (002 direction. Atomic force microscopy analysis revealed that the film surface roughness increased with increasing RH. The average visible transmittance decreased with increasing RH for the RT-deposited film, while it had not considerably changed with different RH for the 300°C-deposited films. The optical bandgap increased as RH increased, which is consistent with the Burstein-Moss effect. The figure of merits indicated that TS=100°C and RH=7.5% were optimal conditions for TZO thin films as transparent conducting electrode applications.

  7. Comparative study on polyvinyl chloride film as flexible substrate for preparing free-standing polyaniline-based composite electrodes for supercapacitors.

    Science.gov (United States)

    Wang, Hongxing; Liu, Dong; Du, Pengcheng; Wei, Wenli; Wang, Qi; Liu, Peng

    2017-11-15

    The free-standing polyaniline (PANI)-based composite film electrodes were prepared with polyvinyl chloride (PVC) and the aniline modified PVC (PVC-An) films as flexible substrates for supercapacitors, via facile in-situ chemical oxidative polymerization of aniline, with conventional chemical oxidative polymerization or rapid-mixing chemical oxidative polymerization technique. Owing to the grafting of PANI from the PVC-An film as substrate and the suppression of the secondary growth of the primary PANI particles in the rapid-mixing chemical oxidative polymerization, the PVC-g-PANI-2 composite film with loose surface possessed better comprehensive performance, accompanying the high specific capacitance (645.3F/g at a current density of 1A/g), good rate capacitance (retaining 63.2% of original value at a current density of 10A/g and 52.0% at a scan rate of 100mV/s), good cycle stability (retaining 83.1% after 1000 cycles) and the improved internal resistance. Besides its excellent flexibility, it could retain 61.2% of its original specific capacitance under the stress of 8.66MPa for 1h, demonstrating a good tensile-resistance. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Reducing Shrinkage in Canned and Frozen Mushrooms

    OpenAIRE

    Gormley, T. R. (Thomas Ronan); Walshe, P.E.

    1982-01-01

    The process involving a preliminary soaking of the mushrooms in water for 20 min followed by a chill storage period followed by a further water soak for 2 hr, and known as the 3S process, gave a considerable reduction in total shrinkage in both brown and white strain canned mushrooms compared with the control samples. Water uptake by the mushrooms in the 3S process was greatest when the soaking water temperature was between 20 and 30°C and had a pH of 8. Citric acid in the blanch water enhanc...

  9. Effect of dose rate of gamma irradiation on biochemical quality and browning of mushrooms Agaricus bisporus

    Science.gov (United States)

    Beaulieu, M.; D'Aprano, G.; Lacroix, M.

    2002-03-01

    In order to enhance the shelf-life of edible mature mushrooms Agaricus bisporus, 2 kGy ionising treatments were applied at two different dose rates: 4.5 kGy/h ( I-) and 32 kGy/h ( I+). Both I+ and I- showed 2 and 4 days shelf-life enhancement compared to the control ( C). Before day 9, no significant difference ( p>0.05) in L* value was detected in irradiated mushrooms. However, after day 9, the highest observed L* value (whiteness) was obtained for the mushrooms irradiated in I-. Analyses of phenolic compounds revealed that mushrooms in I- contained more phenols than I+ and C, the latter containing the lower level of phenols. The polyphenol oxidase (PPO) activities of irradiated mushrooms, analysed via catechol oxidase and dopa oxidase substrates, resulted in being significantly lowered ( p⩽0.05) compared to C, with a further decrease in I+. Analyses of the enzymes indicated that PPO activity was lower in I+, contrasting with its lower phenol concentration. Ionising treatments also increased significantly ( p⩽0.05) the phenylalanine ammonia-lyase (PAL) activity. The observation of mushrooms cellular membranes, by electronic microscopy, revealed a better preserved integrity in I- than in I+. It is thus assumed that the browning effect observed in I+ was caused by both the decompartimentation of vacuolar phenol and by the entry of molecular oxygen into the cell cytoplasm. The synergetic effect of the residual active PPO and the molecular oxygen, in contact with the phenols, allowed an increased oxidation rate and, therefore, a more pronounced browning in I+ than in I-.

  10. Effect of dose rate of gamma irradiation on biochemical quality and browning of mushrooms Agaricus bisporus

    International Nuclear Information System (INIS)

    Beaulieu, M.; D'Aprano, G.; Lacroix, M.

    2002-01-01

    In order to enhance the shelf-life of edible mature mushrooms Agaricus bisporus, 2 kGy ionising treatments were applied at two different dose rates: 4.5 kGy/h (I - ) and 32 kGy/h (I + ). Both I + and I - showed 2 and 4 days shelf-life enhancement compared to the control (C). Before day 9, no significant difference (p>0.05) in L * value was detected in irradiated mushrooms. However, after day 9, the highest observed L * value (whiteness) was obtained for the mushrooms irradiated in I - . Analyses of phenolic compounds revealed that mushrooms in I - contained more phenols than I + and C, the latter containing the lower level of phenols. The polyphenol oxidase (PPO) activities of irradiated mushrooms, analysed via catechol oxidase and dopa oxidase substrates, resulted in being significantly lowered (p≤0.05) compared to C, with a further decrease in I + . Analyses of the enzymes indicated that PPO activity was lower in I + , contrasting with its lower phenol concentration. Ionising treatments also increased significantly (p≤0.05) the phenylalanine ammonia-lyase (PAL) activity. The observation of mushrooms cellular membranes, by electronic microscopy, revealed a better preserved integrity in I - than in I + . It is thus assumed that the browning effect observed in I + was caused by both the decompartimentation of vacuolar phenol and by the entry of molecular oxygen into the cell cytoplasm. The synergetic effect of the residual active PPO and the molecular oxygen, in contact with the phenols, allowed an increased oxidation rate and, therefore, a more pronounced browning in I + than in I -

  11. INTENSIFICATION OF JELLY MUSHROOM CULTIVATION IN PAKEM SLEMAN

    Directory of Open Access Journals (Sweden)

    Sulistiya

    2015-01-01

    Full Text Available Mushroom cultivation is long enough to be a source of income for some people in Pakem, Sleman. However, cultivation techniques that do not yet meet the standards for technical, so that productivity is still low. Marketing mushrooms are limited to the traditional market. Waste mushroom has not been used well, so potentially to pollute the environment mushroom. This service activities include the provision of mushroom cultivation equipment, such as water pumps and termohygrometer and nozzle, and education and training bookkeeping, marketing, and processing waste into mushroom compost. The results showed an increase in the production of mushroom seen from the Biological Conversion Efficiency (BCE are in the top 30 percent. Partners also has a business bookkeeping and have Blog to market the mushroom by on-line. Partners also have the skills to process the manure (compost made from the waste of mushroom which can be used to help fertilize their crops.

  12. Gamma irradiation and heat treatment for sterilization of Mushroom Spent Compost (MSC)

    International Nuclear Information System (INIS)

    Rosnani Abdul Rashid; Hassan Hamdani Mutaat; Foziah Ali; Zainab Harun; Hoe, P.C.K.; Mohd Meswan Maskom; Khairuddin Abdul Rahim

    2016-01-01

    Mushroom spent compost (MSC) refers to substrate residue from mushroom cultivation. MSC can be used as a material to improve soil properties for farming. MSC is also suitable as a carrier or substrate to hold beneficial microorganisms in bio fertilizer products. The carrier for bio fertilizer products must be sterilized completely before inoculating with bacteria inoculum. In this study, the effects of gamma irradiation and heat on sterilization of MSC were evaluated by microbial enumeration technique. The MSC was packed into polyethylene bags. The packed MSC were irradiated at different doses of 0 (control), 10, 20, 30, 40, 50 kGy, and heat sterilized at different autoclaving time of 0 (control), 15, 30, 45 and 60 minutes, separately. The irradiated and autoclaved samples were enumerated for viable colonies. The results showed that MSC was completely sterilized by gamma irradiation at the dose of 30 kGy whilst sterilization by heat required 30 minute autoclaving time. (author)

  13. Ameliorative Effect of Different Concentration of Mushroom ...

    African Journals Online (AJOL)

    Prof. Ogunji

    ameliorative effect of mushroom in the post-experimental stage. Samples of liver and ... except in the liver which showed mild periportal chronic inflammatory cell. However, the .... alcohol for 12 hours and through absolute alcohol to remove ...

  14. Investigations on Mushroom Storage and Quality Parameters

    Directory of Open Access Journals (Sweden)

    Ömür Dündar

    2016-03-01

    Full Text Available In this study, researchers on storage and quality properties of mushrooms cultivated in the world and Turkey have been investigated. Mushrooms contain some important minerals and vitamins such as iron, calcium, phosphorus, potassium, copper and folate, thiamine, riboflavin, niacin, vitamin B, C, D and also they are a good source of carbohydrate and protein. After harvest, to extend the shelf life of mushrooms, some applications such as pre-cooling, storage in appropriate temperature, use of different types of polyethylene packaging, modified atmosphere packaging, nitric oxide and UV light applications were done on mushrooms. The effects of these applications on physical and chemical features such as like weight loss, firmness, cap opening rate, cap diameter, stem diameter, browning, colour, respiration rate, enzymatic reactions, total phenols, total sugars, aminoacid content were investigated.

  15. Flagellate dermatitis following consumption of shiitake mushroom

    Directory of Open Access Journals (Sweden)

    Hui Voon Loo

    2011-10-01

    Full Text Available Japanese dermatologists were the first to describe the very characteristic flagellate dermatitis following consumption of under-cooked or raw shiitake mushroom (Lentinus edodes. These similar eruptions were also reported in patients treated with bleomycin, in dermatomyositis and adult onset Still’s disease. We report a case where a 40 year old chinese female developed flagellate dermatitis following ingestion of a bun containing shiitake mushroom.

  16. Possibility of environmentally-safe casing soil disinfection for control of cobwebdisease of button mushroom

    Directory of Open Access Journals (Sweden)

    Ivana Potočnik

    2014-12-01

    Full Text Available The soil-borne pathogen Cladobotryum dendroides causes cobweb disease of button mushroom (Agaricus bisporus and its significant yield losses. Casing soil disinfection by toxic formaldehyde is a widespread practice. The aim of this study was to investigate the potential of two environmentally friendly substances, colloidal silver and peracetic acid, against C. dendroides. Their biological efficacy (impact on mushroom yield, effectiveness (disease control and type of interactions between them and the fungicide prochloraz-manganese were evaluated. Black peat/lime casing soil was applied to a colonized substrate with the white button mushroom strain 737, then inoculated with C. dendroides and treated with the fungicide prochloraz-manganse and two environmentally friendly disinfectants based on peracetic acid and colloidal silver. The effects of fungicides on mushroom productivity were evaluated as biological efficacy and calculated as a ratio of fresh weight of total mushroom yield to the weight of dry substrate. Fungicide effectiveness and synergy factor were calculated by Abbott’s (1925 formula. Tests for synergism between prochloraz-manganese and both other substances were performed using Limpel’s formula. The highest biolgical efficacy, exceeding 92.00, was achieved in treatments with prochlorazmanganese, applied alone or in combination with both other disinfectants. The highest effectiveness of 93.33% was attained in treatments with peracetic acid combined with prochloraz-manganese. Trials against cobweb disease revealed a synergistic reaction between the fungicide and peracetic acid and antagonistic between the fungicide and colloidal silver. Peracetic acid provided better disease control, compared to colloidal silver applied alone or in combination with the fungicide. Based on these findings, peracetic acid should be recomended as an environmentally friendly casing soil disinfectant against cobweb disease of A. bisporus.

  17. Bioavailability and Digestibility of Nutrients from the Dried Oyster Culinary-Medicinal Mushroom, Pleurotus ostreatus (Agaricomycetes): In Vivo Experiments.

    Science.gov (United States)

    Regula, Julita; Suliburska, Joanna; Siwulski, Marek

    2016-01-01

    There is a limited number of publications on the bioavailability and digestibility of nutrients contained in macrofungi. The aim of this study was to assess the bioavailability and digestibility of macronutrients using in vivo experiments on laboratory animals. The experiments were conducted with the commercial oyster mushroom Pleurotus ostreatus. Semisynthetic diets were prepared based on the modified AIN-93M diet and were supplemented with 4% and 8% mushroom powder. Between days 4 and 13, apparent digestibility indexes were determined for all animals using the conventional balance method. The hematological indexes-that is, hemoglobin, hematocrit, red blood cells, white blood cells, mean corpuscular volume, mean corpuscular hemoglobin, and mean corpuscular hemoglobin concentration-were determined using a Sysmex K-1000 hematological analyzer. Feeding rats with semisynthetic diets supplemented with dried oyster mushroom had no negative effect on body weight gain or feeding efficiency, expressed in the amount of body weight gain per unit of metabolic energy uptake. Introduction of dried oyster mushroom to the diet resulted in reduced digestibility of the diet and the protein and fat it contained, as well as decreased apparent energy availability. These changes were dependent on the volume of dried mushroom added to the semisynthetic diet. The addition of dried oyster mushroom to the semisynthetic diet considerably reduced passage time through the alimentary tract of rats.

  18. Survey of environmental radiation in Kawamata-machi, Fukushima-ken (2). Radioactive cesium in wild mushroom

    International Nuclear Information System (INIS)

    Inagaki, Masayo; Yamanishi, Hirokuni; Wakabayashi, Genichiro; Hohara, Sin-ya; Itoh, Tetsuo; Shirasaka, Norifumi; Tanesaka, Eiji; Okumura, Hiroshi; Furukawa, Michio

    2013-01-01

    Large amount of radioactive cesium was emitted from the TEPCO Fukushima Dai-ichi nuclear power plant by the accident into atmospheric air, and a part of the radioactivity was brought to the ground by rain and snowfall. The Yamakiya district in Kawamata-machi, Fukushima is specified as the prepared evacuation zone. The authors collected wild mushrooms in this district as samples with gentle guide of local mushroom lovers in October, 2012. The kinds of mushroom were specified by the mushroom specialist. 16 kinds of mushrooms have been extracted. The extracted mushroom was brought back to the university. The concentration of radioactive cesium was measured by means of the hyperpure germanium semiconductor detector. The concentrations were ranged from 0.5 to 2600 Bq/g, and were different with points of sampling and kinds. The concentrations were compared with before washing and after washing by means of ultrasonic cleaning. The amount of radioactive cesium reduced to the range from 30% to 60% of the before washing. (author)

  19. Mushrooms, trees, and money: value estimates of commercial mushrooms and timber in the pacific northwest.

    Science.gov (United States)

    Alexander, Susan J; Pilz, David; Weber, Nancy S; Brown, Ed; Rockwell, Victoria A

    2002-07-01

    Wild edible mushrooms are harvested in the forests of the Pacific Northwest, where both trees and mushrooms grow in the same landscape. Although there has been some discussion about the value of trees and mushrooms individually, little information exists about the joint production of, and value for, these two forest products. Through four case studies, the information needed to determine production and value for three wild mushroom species in different forests of the Pacific Northwest is described, and present values for several different forest management scenarios are presented. The values for timber and for mushrooms are site- and species-specific. On the Olympic Peninsula in Washington, timber is highly valued and chanterelles are a low-value product by weight; timber has a soil expectation value (SEV) 12 to 200 times higher than chanterelles. In south-central Oregon, timber and American matsutake mushrooms have the potential to have about the same SEV. In eastern Oregon, timber is worth 20 to 110 times as much as the morels that grow in the forest. Production economics is concerned with choices about how much and what to produce with what resources. The choices are influenced by changes in technical and economic circumstances. Through our description and analysis of the necessary definitions and assumptions to assess value in joint production of timber and wild mushrooms, we found that values are sensitive to assumptions about changes in forest management, yields for mushrooms and trees, and costs.

  20. Olive Mill Waste Enhances α-Glucan Content in the Edible Mushroom Pleurotus eryngii

    Directory of Open Access Journals (Sweden)

    Sharon Avni

    2017-07-01

    Full Text Available Mushroom polysaccharides are edible polymers that have numerous reported biological functions; the most common effects are attributed to β-glucans. In recent years, it became apparent that the less abundant α-glucans also possess potent effects in various health conditions. Here we explore several Pleurotus species for their total, β and α-glucan content. Pleurotus eryngii was found to have the highest total glucan concentrations and the highest α-glucans proportion. We also found that the stalks (stipe of the fruit body contained higher glucan content then the caps (pileus. Since mushrooms respond markedly to changes in environmental and growth conditions, we developed cultivation methods aiming to increase the levels of α and β-glucans. Using olive mill solid waste (OMSW from three-phase olive mills in the cultivation substrate. We were able to enrich the levels mainly of α-glucans. Maximal total glucan concentrations were enhanced up to twice when the growth substrate contained 80% of OMSW compared to no OMSW. Taking together this study demonstrate that Pleurotus eryngii can serve as a potential rich source of glucans for nutritional and medicinal applications and that glucan content in mushroom fruiting bodies can be further enriched by applying OMSW into the cultivation substrate.

  1. Decolourisation of mushroom farm wastewater by Pleurotus ostreatus.

    Science.gov (United States)

    Rodríguez Pérez, Suyén; García Oduardo, Nora; Bermúdez Savón, Rosa C; Fernández Boizán, Maikel; Augur, Christopher

    2008-07-01

    Mushroom production on coffee pulp as substrate generates an intense black residual liquid, which requires suitable treatment. In the present study, Pleurotus ostreatus growth in wastewater from mushroom farm was evaluated as a potential biological treatment process for decolourisation as well as to obtain biomass (liquid inoculum). Culture medium components affecting mycelial growth were determined, evaluating colour removal. Laccase activity was monitored during the process. P. ostreatus was able to grow in non diluted WCP. Highest biomass yield was obtained when glucose (10 g/l) was added. The addition of this carbon source was necessary for efficient decolourisation. Agitation of the culture improved biodegradation of WCP as well as fungal biomass production. Laccase and manganese-independent peroxidase activities were detected during fungal treatment of the WCP by P. ostreatus CCEBI 3024. The laccase enzyme showed good correlation with colour loss. Both wastewater colour and pollution load (as chemical oxygen demand) decreased more than 50% after 10 days of culture. Phenols were reduced by 92%.

  2. AGARICUS BLAZEI MURRILL MUSHROOM COMPOST STUDY ANAEROBIC AND AEROBIC PHASES

    Directory of Open Access Journals (Sweden)

    Sándor Rózsa

    2017-12-01

    Full Text Available Compost for the production of Agaricus blazei Murrill mushrooms, is produced from wheat straw, straw-bedded horse manure, chicken manure and gypsum. The substrate is made in two processes called Phase I (anaerobic and Phase II (aerobic. Phase I includes mixing and moistening of the ingredients and a period of uncontrolled self-heating where temperatures will rise to 80ºC. Phase II starts with a pasteurization period of 8h at 56-60ºC and continues with a conditioning period at 45ºC for up to 7 days until volatile NH3 has been cleared from the process by air. Quality parameters for compost cannot be established directly. Moisture and nitrogen contents and pH can be adjusted at the start of Phase I, but the values will be affected during processing. In this paperwork, we studied the physical properties (water content, electrical conductivity and chemical composition (pH, organic matter, nitrogen, calcium, magnesium, ammonia of four recipes of compost: classical, synthetic, mixt and original. During the experience, we recorded every hour the compost and the air temperature and the air relative humidity. The highest yield was obtained on synthetic compost with 42 kg mushrooms on 100 kg of compost.

  3. Bioremediation of aflatoxin B1-contaminated maize by king oyster mushroom (Pleurotus eryngii.

    Directory of Open Access Journals (Sweden)

    Maria Teresa Branà

    Full Text Available Aflatoxin B1 (AFB1 is the most harmful mycotoxin that occurs as natural contaminant of agricultural commodities, particularly maize. Practical solutions for detoxification of contaminated staples and reduction of agricultural wastes are scarce. We investigated the capability of the white-rot and edible fungus Plerotus eryngii (king oyster mushroom to degrade AFB1 both in vitro and in a laboratory-scale mushroom cultivation, using a substrate similar to that routinely used in mushroom farms. In malt extract broth, degradation of AFB1 (500 ng/mL by nine isolates of P. eryngii ranged from 81 to 99% after 10 days growth, and reached 100% for all isolates after 30 days. The growth of P. eryngii on solid medium (malt extract-agar, MEA was significantly reduced at concentrations of AFB1 500 ng/mL or higher. However, the addition of 5% wheat straw to the culture medium increased the tolerance of P. eryngii to AFB1 and no inhibition was observed at a AFB1 content of 500 ng/mL; degradation of AFB1 in MEA supplemented with 5% wheat straw and 2.5% (w/v maize flour was 71-94% after 30 days of growth. Further, AFB1 degradation by P. eryngii strain ITEM 13681 was tested in a laboratory-scale mushroom cultivation. The mushroom growth medium contained 25% (w/w of maize spiked with AFB1 to the final content of 128 μg/kg. Pleurotus eryngii degraded up to 86% of the AFB1 in 28 days, with no significant reduction of either biological efficiency or mushroom yield. Neither the biomass produced on the mushroom substrate nor the mature basidiocarps contained detectable levels of AFB1 or its metabolite aflatoxicol, thus ruling out the translocation of these toxins through the fungal thallus. These findings make a contribution towards the development of a novel technology for remediation of AFB1- contaminated corn through the exploitation of the degradative capability of P. eryngii and its bioconversion into high nutritional value material intended for feed production.

  4. Biological control of Lycoriella ingenua (Diptera: Sciaridae) in commercial mushroom (Agaricus bisporus) cultivation: a comparison between Hypoaspis miles and Steinernema feltiae.

    Science.gov (United States)

    Jess, Stephen; Schweizer, Heinrich

    2009-11-01

    Mushroom cultivation may be adversely affected by insect pests, including sciarids (Lycoriella spp.), which were previously controlled by application of chemical pesticides. However, owing to food safety and environmental concerns, availability of pesticides for use during mushroom cultivation has diminished. Consequently, it is imperative to investigate alternative control strategies, not reliant on chemical pesticides, which may be used in an integrated pest management system. Application of the predatory mite Hypoaspis miles Berlese to commercial mushroom-growing beds at the beginning of spawn run or just prior to casing (830 mites m(-2)) significantly reduced immature sciarids, Lycoriella ingenua (Dufour), in the growing substrate and also adult activity towards the conclusion of cropping. A trend towards lower sciarid emergence from substrates and reduced adult sciarid activity was observed following the application of Steinernema feltiae (Filipjev) (1.5 x 10(6) nematodes m(-2)) at casing. No significant treatment effects on mushroom yield were observed. However, contamination of the mushroom crop by adult sciarids increased in untreated controls. Application of H. miles required a 12-fold increase in labour when compared with application of S. feltiae. Contingent upon the development of an effective application system, H. miles has potential for the biological control of sciarids in commercial mushroom production. (c) 2009 Society of Chemical Industry.

  5. A Data Mining Approach to Improve Inorganic Characterization of Amanita ponderosa Mushrooms

    Directory of Open Access Journals (Sweden)

    Cátia Salvador

    2018-01-01

    Full Text Available Amanita ponderosa are wild edible mushrooms that grow in some microclimates of Iberian Peninsula. Gastronomically this species is very relevant, due to not only the traditional consumption by the rural populations but also its commercial value in gourmet markets. Mineral characterisation of edible mushrooms is extremely important for certification and commercialization processes. In this study, we evaluate the inorganic composition of Amanita ponderosa fruiting bodies (Ca, K, Mg, Na, P, Ag, Al, Ba, Cd, Cr, Cu, Fe, Mn, Pb, and Zn and their respective soil substrates from 24 different sampling sites of the southwest Iberian Peninsula (e.g., Alentejo, Andalusia, and Extremadura. Mineral composition revealed high content in macroelements, namely, potassium, phosphorus, and magnesium. Mushrooms showed presence of important trace elements and low contents of heavy metals within the limits of RDI. Bioconcentration was observed for some macro- and microelements, such as K, Cu, Zn, Mg, P, Ag, and Cd. A. ponderosa fruiting bodies showed different inorganic profiles according to their location and results pointed out that it is possible to generate an explanatory model of segmentation, performed with data based on the inorganic composition of mushrooms and soil mineral content, showing the possibility of relating these two types of data.

  6. A Data Mining Approach to Improve Inorganic Characterization of Amanita ponderosa Mushrooms.

    Science.gov (United States)

    Salvador, Cátia; Martins, M Rosário; Vicente, Henrique; Caldeira, A Teresa

    2018-01-01

    Amanita ponderosa are wild edible mushrooms that grow in some microclimates of Iberian Peninsula. Gastronomically this species is very relevant, due to not only the traditional consumption by the rural populations but also its commercial value in gourmet markets. Mineral characterisation of edible mushrooms is extremely important for certification and commercialization processes. In this study, we evaluate the inorganic composition of Amanita ponderosa fruiting bodies (Ca, K, Mg, Na, P, Ag, Al, Ba, Cd, Cr, Cu, Fe, Mn, Pb, and Zn) and their respective soil substrates from 24 different sampling sites of the southwest Iberian Peninsula (e.g., Alentejo, Andalusia, and Extremadura). Mineral composition revealed high content in macroelements, namely, potassium, phosphorus, and magnesium. Mushrooms showed presence of important trace elements and low contents of heavy metals within the limits of RDI. Bioconcentration was observed for some macro- and microelements, such as K, Cu, Zn, Mg, P, Ag, and Cd. A. ponderosa fruiting bodies showed different inorganic profiles according to their location and results pointed out that it is possible to generate an explanatory model of segmentation, performed with data based on the inorganic composition of mushrooms and soil mineral content, showing the possibility of relating these two types of data.

  7. Notes on a New Productive Strain of King Oyster Mushroom, Pleurotus eryngii (Higher Basidiomycetes), a Prized Italian Culinary-Medicinal Mushroom.

    Science.gov (United States)

    Venturella, Giuseppe; Palazzolo, Eristanna; Saiano, Filippo; Gargano, Maria Letizia

    2015-01-01

    In this paper, the authors provide data on a culinary-medicinal, host-specific variety of P. eryngii species-complex that is known in Italy as "cardoncello". A species description, the techniques of isolation of a new strain (C-142-c), and the preparation of the substratum are illustrated. Data on the productivity of substratum inoculated with C-142-c strain and the nutritional value of cultivated "cardoncello" mushrooms are also provided.

  8. Semi-transparent ordered TiO{sub 2} nanostructures prepared by anodization of titanium thin films deposited onto the FTO substrate

    Energy Technology Data Exchange (ETDEWEB)

    Szkoda, Mariusz, E-mail: mariusz-szkoda@wp.pl [Department of Chemistry and Technology of Functional Materials, Faculty of Chemistry, Gdańsk University of Technology, Narutowicza 11/12, Gdańsk 80-233 (Poland); Lisowska-Oleksiak, Anna [Department of Chemistry and Technology of Functional Materials, Faculty of Chemistry, Gdańsk University of Technology, Narutowicza 11/12, Gdańsk 80-233 (Poland); Grochowska, Katarzyna [Centre for Plasma and Laser Engineering, Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Science, Fiszera 14, 80-231 Gdańsk (Poland); Skowroński, Łukasz [Institute of Mathematics and Physics, UTP University of Science and Technology, Kaliskiego 7, 85-796 Bydgoszcz (Poland); Karczewski, Jakub [Faculty of Applied Physics and Mathematics, Gdańsk University of Technology, Narutowicza 11/12, 80-233 Gdańsk (Poland); Siuzdak, Katarzyna [Centre for Plasma and Laser Engineering, Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Science, Fiszera 14, 80-231 Gdańsk (Poland)

    2016-09-15

    Highlights: • High quality titanium coatings were doposited using industrial magnetron sputtering equipment. • Semi-transparent TiO{sub 2} were prepared via anodization realized in various conditions. • Depending on electrolyte type, ordered tubular or porous TiO{sub 2} layers were obtained. • Prepared material can act as semiconducting layer in photovoltaic cells. - Abstract: In a significant amount of cases, the highly ordered TiO{sub 2} nanotube arrays grow through anodic oxidation of a titanium metal plate immersed in electrolyte containing fluoride ions. However, for some practical applications, e.g. solar cells or electrochromic windows, the semi-transparent TiO{sub 2} formed directly on the transparent, conductive substrate is very much desired. This work shows that high-quality Ti coating could be formed at room temperature using an industrial magnetron sputtering system within 50 min. Under optimized conditions, the anodization process was performed on 2 μm titanium films deposited onto the FTO (fluorine-tin-oxide) support. Depending on the electrolyte type, highly ordered tubular or porous titania layers were obtained. The fabricated samples, after their thermal annealing, were investigated using scanning electron microscopy, Raman spectroscopy and UV–vis spectroscopy in order to investigate their morphology, crystallinity and absorbance ability. The photocurrent response curves indicate that materials are resistant to the photocorrosion process and their activity is strongly connected to optical properties. The most transparent TiO{sub 2} films were fabricated when Ti was anodized in water electrolyte, whereas the highest photocurrent densities (12 μA cm{sup −2}) were registered for titania received after Ti anodization in ethylene glycol solution. The obtained results are of significant importance in the production of thin, semi-transparent titania nanostructures on a commercial scale.

  9. Semi-transparent ordered TiO_2 nanostructures prepared by anodization of titanium thin films deposited onto the FTO substrate

    International Nuclear Information System (INIS)

    Szkoda, Mariusz; Lisowska-Oleksiak, Anna; Grochowska, Katarzyna; Skowroński, Łukasz; Karczewski, Jakub; Siuzdak, Katarzyna

    2016-01-01

    Highlights: • High quality titanium coatings were doposited using industrial magnetron sputtering equipment. • Semi-transparent TiO_2 were prepared via anodization realized in various conditions. • Depending on electrolyte type, ordered tubular or porous TiO_2 layers were obtained. • Prepared material can act as semiconducting layer in photovoltaic cells. - Abstract: In a significant amount of cases, the highly ordered TiO_2 nanotube arrays grow through anodic oxidation of a titanium metal plate immersed in electrolyte containing fluoride ions. However, for some practical applications, e.g. solar cells or electrochromic windows, the semi-transparent TiO_2 formed directly on the transparent, conductive substrate is very much desired. This work shows that high-quality Ti coating could be formed at room temperature using an industrial magnetron sputtering system within 50 min. Under optimized conditions, the anodization process was performed on 2 μm titanium films deposited onto the FTO (fluorine-tin-oxide) support. Depending on the electrolyte type, highly ordered tubular or porous titania layers were obtained. The fabricated samples, after their thermal annealing, were investigated using scanning electron microscopy, Raman spectroscopy and UV–vis spectroscopy in order to investigate their morphology, crystallinity and absorbance ability. The photocurrent response curves indicate that materials are resistant to the photocorrosion process and their activity is strongly connected to optical properties. The most transparent TiO_2 films were fabricated when Ti was anodized in water electrolyte, whereas the highest photocurrent densities (12 μA cm"−"2) were registered for titania received after Ti anodization in ethylene glycol solution. The obtained results are of significant importance in the production of thin, semi-transparent titania nanostructures on a commercial scale.

  10. Preparation of Nd-Fe-B/α-Fe nano-composite thick-film magnets on various substrates using PLD with high laser energy density above 10 J/cm2

    Science.gov (United States)

    Nakano, M.; Kondo, H.; Yamashita, A.; Yanai, T.; Itakura, M.; Fukunaga, H.

    2018-05-01

    PLD (Pulsed Laser Deposition) method with high laser energy density (LED) above 10 J/cm2 followed by a flash annealing enabled us to obtain isotropic nano-composite thick-film magnets with (BH)max ≧ 80 kJ/m3 on polycrystalline Ta substrates. We also have demonstrated that a dispersed structure composed of α-Fe together with Nd2Fe14B phases with the average grain diameter of approximately 20 nm could be formed on the Ta substrates. In this study, we tried to enhance the (BH)max value by controlling the microstructure due to the usage of different metal based substrates with each high melting point such as Ti, Nb, and W. Although it was difficult to vary the microstructure and to improve the magnetic properties of the films deposited on the substrates, we confirmed that isotropic thick-film magnets with (BH)max ≧ 80 kJ/m3 based on the nano-dispersed α-Fe and Nd2Fe14B phases could be obtained on various metal substrates with totally different polycrystalline structure. On the other hand, the use of a glass substrate lead to the deterioration of magnetic properties of a film prepared using the same preparation process.

  11. Monitoring of Benomyl Residue in Mushroom Marketed in Hamadan City

    Directory of Open Access Journals (Sweden)

    S. Abdi

    2015-07-01

    Full Text Available Introduction & Objective: Pesticide residues in environment and food have a negative impact on the health of living organisms. Therefore, this study was carried out for evaluation of benomyl residues in mushroom marketed in Hamadan city in 2014 using spectrophotometry. Materials & Methods: 10 specimens of mushroom were collected from greenhouses and market basket of Hamadan city. After preparation and processing the samples in the laboratory, be-nomyl residues in samples were determined using a spectrophotometric method in 3 replica-tions. All statistical analyses were performed using the SPSS statistical package. Results: The mean concentration of benomyl residues in samples were 5.90±0.75, 2.10± 0.487, 40.04±1.346, 0.32±0.044, 14.0±0.785, 1.54±0.304, 40.0±0.45, 0.87±0.055, 0.66± 0.032 and 49.60±0.303 µg kg-1 and more than the maximum residue limit (MRL provided by the World Health Organization (10 ppb. The results of the comparison of the mean concentration of pesticide residues among samples revealed significant differences in most of the samples (P<0.05. Conclusion: The results showed that mean concentrations of benomyl residues in mushroom samples were exceeding that of the MRL. Therefore, it is essential to impart proper education to the farming community about hazards involved in the overuse of toxic pesticides. Also, codification of laws and their enforcement and implementation of programs for the regular periodic monitoring of pesticide residues in foodstuffs especially in vegetables cultivated un-der greenhouse conditions at the national level to protect consumers’ health are recom-mended.(Sci J Hamadan Univ Med Sci 2015; 22 (2: 137-143

  12. Characterization of Urea Versus hmta in the Preparation of Zinc Oxide NANOSTRUCTURES by Catalytic Immersion Method Grown on Gold-seeded Silicon Substrate

    International Nuclear Information System (INIS)

    Azlinda Abdul Aziz; Khusaimi, Z.; Rusop, M.

    2011-01-01

    Zinc oxide (ZnO) nano structured prepared by immersed method were successfully grown on gold-seeded silicon substrate using Zinc nitrate hexahydrate (Zn(NO 3 ) 2 .6H 2 O) as a precursor was stabilized by a non-toxic urea (CH 4 N 2 O) in a ratio of 1:2 and 1:1 ratio of hexamethylene tetraamine (HMTA). The effect of changing the stabilizer of ZnO solution on the crystal structure, morphology and photoluminescence properties of the resultant ZnO is investigated. X-ray diffraction of the synthesized ZnO shows hexagonal zincite structure. The morphology of the ZnO was characterizing using Field Emission Scanning Electron Microscope (FESEM). The growth of ZnO using urea as stabilizer shows the clusters of ZnO nano flower with serrated broad petals and sharp tips of approximately 25 nm were interestingly formed. ZnO in HMTA showed growth of nano rods. The structures has high surface area, is a potential metal oxide nano structures to be develop for optoelectronic devices and chemical sensors. The formation of ZnO nano structures is found to be significantly affected by the stabilizer. (author)

  13. Preparation of anti-adhesion surfaces on aluminium substrates of rubber plastic moulds using a coupling method of liquid plasma and electrochemical machining

    Science.gov (United States)

    Meng, Jianbing; Dong, Xiaojuan; Wei, Xiuting; Yin, Zhanmin

    2014-03-01

    Hard anti-adhesion surfaces, with low roughness and wear resistance, on aluminium substrates of rubber plastic moulds were fabricated via a new coupling method of liquid plasma and electrochemical machining. With the aid of liquid plasma thermal polishing and electrochemical anodic dissolution, micro/nano-scale binary structures were prepared as the base of the anti-adhesion surfaces. The anti-adhesion behaviours of the resulting aluminium surfaces were analysed by a surface roughness measuring instrument, a scanning electron microscope (SEM), a Fourier-transform infrared spectrophotometer (FTIR), an X-ray diffractometer (XRD), an optical contact angle meter, a digital Vickers micro-hardness (Hv) tester, and electronic universal testing. The results show that, after the liquid plasma and electrochemical machining, micro/nano-scale binary structures composed of micro-scale pits and nano-scale elongated boss structures were present on the sample surfaces. As a result, the anti-adhesion surfaces fabricated by the above coupling method have good anti-adhesion properties, better wear resistance and lower roughness.

  14. Preparation of anti-adhesion surfaces on aluminium substrates of rubber plastic moulds using a coupling method of liquid plasma and electrochemical machining

    Directory of Open Access Journals (Sweden)

    Jianbing Meng

    2014-02-01

    Full Text Available Hard anti-adhesion surfaces, with low roughness and wear resistance, on aluminium substrates of rubber plastic moulds were fabricated via a new coupling method of liquid plasma and electrochemical machining. With the aid of liquid plasma thermal polishing and electrochemical anodic dissolution, micro/nano-scale binary structures were prepared as the base of the anti-adhesion surfaces. The anti-adhesion behaviours of the resulting aluminium surfaces were analysed by a surface roughness measuring instrument, a scanning electron microscope (SEM, a Fourier-transform infrared spectrophotometer (FTIR, an X-ray diffractometer (XRD, an optical contact angle meter, a digital Vickers micro-hardness (Hv tester, and electronic universal testing. The results show that, after the liquid plasma and electrochemical machining, micro/nano-scale binary structures composed of micro-scale pits and nano-scale elongated boss structures were present on the sample surfaces. As a result, the anti-adhesion surfaces fabricated by the above coupling method have good anti-adhesion properties, better wear resistance and lower roughness.

  15. Preparation of anti-adhesion surfaces on aluminium substrates of rubber plastic moulds using a coupling method of liquid plasma and electrochemical machining

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Jianbing, E-mail: jianbingmeng@126.com; Dong, Xiaojuan; Wei, Xiuting; Yin, Zhanmin [School of Mechanical Engineering, Shandong University of Technology, Zibo, 255049 (China)

    2014-03-15

    Hard anti-adhesion surfaces, with low roughness and wear resistance, on aluminium substrates of rubber plastic moulds were fabricated via a new coupling method of liquid plasma and electrochemical machining. With the aid of liquid plasma thermal polishing and electrochemical anodic dissolution, micro/nano-scale binary structures were prepared as the base of the anti-adhesion surfaces. The anti-adhesion behaviours of the resulting aluminium surfaces were analysed by a surface roughness measuring instrument, a scanning electron microscope (SEM), a Fourier-transform infrared spectrophotometer (FTIR), an X-ray diffractometer (XRD), an optical contact angle meter, a digital Vickers micro-hardness (Hv) tester, and electronic universal testing. The results show that, after the liquid plasma and electrochemical machining, micro/nano-scale binary structures composed of micro-scale pits and nano-scale elongated boss structures were present on the sample surfaces. As a result, the anti-adhesion surfaces fabricated by the above coupling method have good anti-adhesion properties, better wear resistance and lower roughness.

  16. Highly-ordered mesoporous titania thin films prepared via surfactant assembly on conductive indium-tin-oxide/glass substrate and its optical properties

    International Nuclear Information System (INIS)

    Uchida, Hiroshi; Patel, Mehul N.; May, R. Alan; Gupta, Gaurav; Stevenson, Keith J.; Johnston, Keith P.

    2010-01-01

    Highly ordered mesoporous titanium dioxide (titania, TiO 2 ) thin films on indium-tin-oxide (ITO) coated glass were prepared via a Pluronic (P123) block copolymer template and a hydrophilic TiO 2 buffer layer. The contraction of the 3D hexagonal array of P123 micelles upon calcination merges the titania domains on the TiO 2 buffer layer to form mesoporous films with a mesochannel diameter of approximately 10 nm and a pore-to-pore distance of 10 nm. The mesoporous titania films on TiO 2 -buffered ITO/glass featured an inverse mesospace with a hexagonally-ordered structure, whereas the films formed without a TiO 2 buffer layer had a disordered microstructure with submicron cracks because of non-uniform water condensation on the hydrophobic ITO/glass surface. The density of the mesoporous film was 83% that of a bulk TiO 2 film. The optical band gap of the mesoporous titania thin film was approximately 3.4 eV, larger than that for nonporous anatase TiO 2 (∼ 3.2 eV), suggesting that the nanoscopic grain size leads to an increase in the band gap due to weak quantum confinement effects. The ability to form highly-ordered mesoporous titania films on electrically conductive and transparent substrates offers the potential for facile fabrication of high surface area semiconductive films with small diffusion lengths for optoelectronics applications.

  17. Preparation of epitaxial YBa2Cu3O7-y films on CeO2-buffered yttria-stabilized zirconia substrates by fluorine-free metalorganic deposition

    International Nuclear Information System (INIS)

    Tsukada, Kenichi; Yamaguchi, Iwao; Sohma, Mitsugu; Kondo, Wakichi; Kamiya, Kunio; Kumagai, Toshiya; Manabe, Takaaki

    2007-01-01

    Epitaxial YBa 2 Cu 3 O 7-y (YBCO) films of 120-550 nm thickness have been prepared by fluorine-free metalorganic deposition using a metal acetylacetonate-based coating solution on yttria-stabilized zirconia (YSZ) substrates with an evaporated CeO 2 buffer layer. The YBCO films were highly (0 0 1)-oriented by X-ray diffraction θ-2θ scanning and φ scanning. The YBCO films 120-400 nm in thickness demonstrated high critical current densities (J c ) with an average in excess of 3 MA/cm 2 at 77 K using an inductive method. In particular, a 210-nm-thick film showed a J c of 4.5 MA/cm 2 . These excellent properties are attributed to the high crystallinity, small in-plane fluctuation due to high epitaxy and to the microstructure free from grain boundaries in the YBCO films. Further increase of film thickness increased the fraction of irregularities, i.e., precipitates and micropores, in the film surfaces, resulting in lower J c values

  18. Preparation of thin hexagonal highly-ordered anodic aluminum oxide (AAO) template onto silicon substrate and growth ZnO nanorod arrays by electrodeposition

    Science.gov (United States)

    Chahrour, Khaled M.; Ahmed, Naser M.; Hashim, M. R.; Elfadill, Nezar G.; Qaeed, M. A.; Bououdina, M.

    2014-12-01

    In this study, anodic aluminum oxide (AAO) templates of Aluminum thin films onto Ti-coated silicon substrates were prepared for growth of nanostructure materials. Hexagonally highly ordered thin AAO templates were fabricated under controllable conditions by using a two-step anodization. The obtained thin AAO templates were approximately 70 nm in pore diameter and 250 nm in length with 110 nm interpore distances within an area of 3 cm2. The difference between first and second anodization was investigated in details by in situ monitoring of current-time curve. A bottom barrier layer of the AAO templates was removed during dropping the voltage in the last period of the anodization process followed by a wet etching using phosphoric acid (5 wt%) for several minutes at ambient temperature. As an application, Zn nanorod arrays embedded in anodic alumina (AAO) template were fabricated by electrodeposition. Oxygen was used to oxidize the electrodeposited Zn nanorods in the AAO template at 700 °C. The morphology, structure and photoluminescence properties of ZnO/AAO assembly were analyzed using Field-emission scanning electron microscope (FESEM), Energy dispersive X-ray spectroscopy (EDX), Atomic force microscope (AFM), X-ray diffraction (XRD) and photoluminescence (PL).

  19. Preparation of a Novel Ce0.9La0.1O2/Gd2Zr2O7 Buffer Layer Stack on NiW Alloy Substrates by the MOD Route

    DEFF Research Database (Denmark)

    Yue, Zhao; Grivel, Jean-Claude; Abrahamsen, Asger Bech

    2011-01-01

    An optimized buffer layer architecture prepared by a metal organic deposition method on biaxially textured metallic substrate is proposed and developed successfully. The major achievement of this work is to choose a ${\\rm Ce}_{0.9}{\\rm La}_{0.1}{\\rm O}_{2}$ layer as cap layer that possesses an ex...

  20. Mushroom cultivation in Brazil: challenges and potential for growth

    OpenAIRE

    Dias,Eustáquio Souza

    2010-01-01

    Mushroom cultivation is rapidly expanding in Brazil because Brazilians have discovered the medicinal and culinary value of mushrooms and their economic situation has improved. However, the horticultural technology for cultivating mushrooms under Brazilian conditions is lacking. For many years, the mushroom cultivation technology used in Brazil was adapted from developed countries whose materials and climate were different from those of Brazil. In order to exploit the Brazilian potential for m...

  1. Dung-associated, Potentially Hallucinogenic Mushrooms from Taiwan

    OpenAIRE

    Yen-Wen Wang; Shean-Shong Tzean

    2015-01-01

    To identify potentially hallucinogenic mushrooms, dung-associated mushrooms collected from Qingtiangang, Yangmingshan National Park were subjected to a detailed morphological investigation and phylogentic analysis. The investigation identified four taxa: a recorded species (Panaeolus antillarum); a new combination (Conocybe nitrophila); and two new species (Psilocybe angulospora, Protostropharia ovalispora). Morphological and molecular characteristics of the collected mushrooms were compared ...

  2. A resource efficiency assessment of the industrial mushroom production chain

    NARCIS (Netherlands)

    Zisopoulos, Filippos K.; Becerra Ramírez, Henry A.; Goot, van der Atze Jan; Boom, Remko M.

    2016-01-01

    We compare the exergetic performance of a conventional industrial mushroom production chain with a mushroom production chain where part of the compost waste is recycled and reused as raw material. The critical exergy loss points (CEPs) identified are the cooking-out process of the spent mushroom

  3. Proximate and mineral composition of four edible mushroom species

    African Journals Online (AJOL)

    Owner

    Key words: Edible mushrooms; food composition. INTRODUCTION. Mushrooms are saprophytes. ... riboflavin, biotin and thiamine (Chang and Buswell,. 1996). Ogundana and Fagade (1981) indicated that ... Four edible mushroom species were analyzed for food composition according to the Association of Official Analytical ...

  4. Vitamin D-fortified chitosan films from mushroom waste

    Science.gov (United States)

    Brown mushroom (Agaricus bisporus) stalk bases from mushroom waste were treated with UV-B light to rapidly increase vitamin D2 content. Chitin was also recovered from this waste and converted into chitosan by N-deacetylation. FTIR spectra showed that the mushroom chitosan were similar to chitosan fr...

  5. Symbiosis and synergy: Can mushrooms and timber be managed together?

    Science.gov (United States)

    Sally. Duncan

    2000-01-01

    Recreational and tribal use of mushrooms has been historically important, and during the last two decades, commercial demand for mushrooms has burgeoned. A large nontimber forest product market in the Pacific Northwest is for various species of wild edible mushrooms. Many of these species grow symbiotically with forest trees by forming nutrient exchange structures...

  6. Mineral Composition of Four Edible Mushrooms

    Directory of Open Access Journals (Sweden)

    S. E. Mallikarjuna

    2013-01-01

    Full Text Available Two cultivated mushroom species, namely, Lentinula edodes and Pleurotus florida and two wild growing species Lentinus cladopus and Pleurotus djamor were studied for their mineral contents such as Ca, Mg, Na, K, Fe, Zn, Mn, Cu, Ni, Se, Pb, and Cd by Inductive Coupled Plasma Atomic Emission Spectroscopy (ICP-AES and also Atomic Absorption Spectroscopy, (AAS. Phosphorus was estimated by spectrophotometric method. K, Ca, Na, and P were in higher concentrations ranging from 59.3 mg to 3634 mg, 8.27 mg–174.9 mg, 22.2 mg–327.4 mg, and 100.5 mg–769.9 mg/100 g dry weight respectively in the four mushroom species studied. Fe, Zn, Mg and Se were ranging from 6.27 mg to 35.3 mg, 1.58 mg–9.44 mg, 21.1 mg–40.7 mg and 0.048 mg–0.182 mg/100 g dry weight, respectively, amongst the mushroom species analyzed. However, Ni, Cu, and Mn contents showed relatively lower concentrations, whereas Pb and Cd were below detectable level. The mushrooms were safe for consumption, in accordance with the permissible tolerance limits of the estimated toxic metals. Implications of the mineral contents on mushroom nutritional value are highlighted.

  7. Production of bio-fertilizer from microwave vacuum pyrolysis of waste palm shell for cultivation of oyster mushroom (Pleurotus ostreatus

    Directory of Open Access Journals (Sweden)

    Nam Wai Lun

    2017-01-01

    Full Text Available Microwave vacuum pyrolysis of waste palm shell (WPS was performed to produce biochar, which was then tested as bio-fertilizer in growing Oyster mushroom (Pleurotus ostreatus. The pyrolysis approach generated a biochar containing a highly porous structure with a high BET surface area (up to 1250 m2/g and a low moisture content (≤ 10 wt%, exhibiting desirable adsorption properties to be used as bio-fertilizer since it can act as a housing that provides many sites on which living microorganisms (mycelium or plant-growth promoting bacteria and organic nutrients can be attached or adsorbed onto. This could in turn stimulate plant growth by increasing the availability and supply of nutrients to the targeted host plant. The results from growing Oyster mushroom using the biochar record an impressive growth rate and a monthly production of up to about 550 g of mushroom. The shorter time for mycelium growth on whole baglog (30 days and the highest yield of Oyster mushroom (550 g was obtained from the cultivation medium added with 20 g of biochar. Our results demonstrate that the biochar-based bio-fertilizer produce from microwave vacuum pyrolysis of WPS show exceptional promise as an alternative growing substrate for mushroom cultivation.

  8. Production of bio-fertilizer from microwave vacuum pyrolysis of waste palm shell for cultivation of oyster mushroom (Pleurotus ostreatus)

    Science.gov (United States)

    Lun Nam, Wai; Huan Su, Man; Phang, Xue Yee; Chong, Min Yee; Keey Liew, Rock; Ma, Nyuk Ling; Lam, Su Shiung

    2017-11-01

    Microwave vacuum pyrolysis of waste palm shell (WPS) was performed to produce biochar, which was then tested as bio-fertilizer in growing Oyster mushroom (Pleurotus ostreatus). The pyrolysis approach generated a biochar containing a highly porous structure with a high BET surface area (up to 1250 m2/g) and a low moisture content (≤ 10 wt%), exhibiting desirable adsorption properties to be used as bio-fertilizer since it can act as a housing that provides many sites on which living microorganisms (mycelium or plant-growth promoting bacteria) and organic nutrients can be attached or adsorbed onto. This could in turn stimulate plant growth by increasing the availability and supply of nutrients to the targeted host plant. The results from growing Oyster mushroom using the biochar record an impressive growth rate and a monthly production of up to about 550 g of mushroom. The shorter time for mycelium growth on whole baglog (30 days) and the highest yield of Oyster mushroom (550 g) was obtained from the cultivation medium added with 20 g of biochar. Our results demonstrate that the biochar-based bio-fertilizer produce from microwave vacuum pyrolysis of WPS show exceptional promise as an alternative growing substrate for mushroom cultivation.

  9. Centesimal composition and physical-chemistry analysis of the edible mushroom Lentinus strigosus occurring in the Brazilian Amazon.

    Science.gov (United States)

    Sales-Campos, Ceci; Araujo, Lidia M; Minhoni, Marli T A; Andrade, Meire C N

    2013-01-01

    The centesimal composition and the physical and chemical analyses of Lentinus strigosus, an edible mushroom occurring in the Brazilian Amazon and produced in alternative substrates based on wood and agroindustrial residues, were evaluated. For this purpose, the C, N, pH, soluble solids, water activity, protein, lipids, total fiber, ash, carbohydrate, and energy levels were determined. The substrates were formulated from Simarouba amara Aubl. ("marupá"), Ochroma piramidale Cav. Ex. Lam. ("pau-de-balsa") and Anacardium giganteum ("cajuí") sawdust and Bactris gasipaes Kunth ("pupunheira") stipe and Saccharum officinarum (sugar cane bagasse). The results indicated that the nutritional composition of L. strigosus varied with the substrate of cultivation; the protein levels found in mushrooms grown in the different substrates (18-21.5%) varied with the substrate and was considered high; the soluble solids present in the mushrooms could have a relation with complex B hydrosoluble vitamins. L. strigosus could be considered as important food owing to its nutritional characteristics such as high protein content, metabolizable carbohydrates and fibers, and low lipids and calories content.

  10. Centesimal composition and physical-chemistry analysis of the edible mushroom Lentinus strigosus occurring in the Brazilian Amazon

    Directory of Open Access Journals (Sweden)

    CECI SALES-CAMPOS

    2013-10-01

    Full Text Available The centesimal composition and the physical and chemical analyses of Lentinus strigosus, an edible mushroom occurring in the Brazilian Amazon and produced in alternative substrates based on wood and agroindustrial residues, were evaluated. For this purpose, the C, N, pH, soluble solids, water activity, protein, lipids, total fiber, ash, carbohydrate, and energy levels were determined. The substrates were formulated from Simarouba amara Aubl. (“marupá”, Ochroma piramidale Cav. Ex. Lam. (“pau-de-balsa” and Anacardium giganteum (“cajuí” sawdust and Bactris gasipaes Kunth (“pupunheira” stipe and Saccharum officinarum (sugar cane bagasse. The results indicated that the nutritional composition of L. strigosus varied with the substrate of cultivation; the protein levels found in mushrooms grown in the different substrates (18 – 21.5% varied with the substrate and was considered high; the soluble solids present in the mushrooms could have a relation with complex B hydrosoluble vitamins. L. strigosus could be considered as important food owing to its nutritional characteristics such as high protein content, metabolizable carbohydrates and fibers, and low lipids and calories content.

  11. Biosynthesis of silver nanoparticles by using Ganoderma-mushroom extract

    Science.gov (United States)

    Ekar, S. U.; Khollam, Y. B.; Koinkar, P. M.; Mirji, S. A.; Mane, R. S.; Naushad, M.; Jadhav, S. S.

    2015-03-01

    Present study reports the biochemical synthesis of silver nanoparticles (Ag-NPs) from aqueous medium by using the extract of medicinal mushroom Ganoderma, as a reducing and stabilizing agents. The Ag-NPs are prepared at room temperature by the reduction of Ag+ to Ag in aqueous solution of AgNO3. The resultant particles are characterized by using UV-visible spectroscopy, Fourier transform infrared (FTIR) spectroscopy and transmission electron microscopy (TEM) measurement techniques. The formation of Ag-NPs is confirmed by recording the UV-visible absorption spectra for surface plasmon resonance (SPR) where peak around 427 nm. The prominent changes observed in FTIR spectra supported the reduction of Ag+ to Ag. The morphological features of Ag-NPs are evaluated from HRTEM. The spherical Ag-NPs are observed in transmission electron microscopy (TEM) studies. The particle size distribution is found to be nearly uniform with average particle size of 2 nm. The Ag-NPs aged for 15, 30, 60 and 120 days showed no profound effect on the position of SPR peak in UV-visible studies, indicating the protecting/capping ability of medicinal mushroom Ganoderma in the synthesis of Ag-NPs.

  12. Evaluation of various substrates and supplements for biological ...

    African Journals Online (AJOL)

    An experiment was conducted to determine the effects of different substrates namely wheat straw (Triticum aestivum), maize stover (Zea mays L), thatch grass (Hyparrhenia filipendula) and oil/protein rich supplements (maize bran, cottonseed hull [Gossypium hirsutum]) on biological efficiency of two oyster mushroom ...

  13. Evaluation of nutritional substrate and physical stress (gamma ...

    African Journals Online (AJOL)

    The β-glucans productivity of the mushroom depends upon the growing conditions, nutritional substrates, biotic and abiotic stress factors that result in an enzymes over-expression. The study shows the potential response of glucan production by fungi grown on newly designed animal plant crude (hydrolyzate) extract broth ...

  14. High protein complementation with high fiber substrates for oyster ...

    African Journals Online (AJOL)

    Agricultural residues have been world widely accepted for oyster mushroom culture. In this study, we used wheat straw, barley straw, maize stem residue, and lawn residue as substrates coupled with wheat bran, rice bran and soybean powder as complements for the growth of Pleurotus florida and Pleurotus ostreatus as ...

  15. Utilização do composto exaurido de Pleurotus sajor caju em rações de frangos de corte e seus efeitos no desempenho dessas aves - DOI: 10.4025/actascianimsci.v31i2.4811 Utilization of the spent substrate of Pleurotus sajor caju mushroom in broiler chicks ration and the effect on broiler chicken performance - DOI: 10.4025/actascianimsci.v31i2.4811

    Directory of Open Access Journals (Sweden)

    Antônio Gilberto Bertechini

    2009-08-01

    Full Text Available Avaliou-se a adição dietética de um composto exaurido da produção do cogumelo Pleurotus sajor caju sobre o desempenho de frangos de corte nos períodos de um a 21, 22 a 38 e um a 38 dias de idade. Foram utilizados 500 pintos de um dia Ross-308, machos, em delineamento inteiramente casualizado, com cinco tratamentos, obtidos pelos níveis do composto na ração (0; 0,5; 1,0; 1,5 e 2,0% com quatro repetições de 20 aves cada. Foram avaliados ganho de peso, consumo de ração, conversão alimentar, rendimento de carcaça, gordura abdominal e altura das microvilosidades do intestino. A adição do composto não influenciou no consumo da ração e na conversão alimentar. Para o ganho de peso houve efeito positivo somente na fase inicial (um a 21 dias, sendo o valor máximo obtido com a adição de 0,67% do composto. A adição do composto não alterou o rendimento de carcaça e gordura abdominal, porém, alterou a altura das microvilosidades do intestino. A adição de composto exaurido da produção do fungo Pleurotus sajor caju, na concentração de 0,67%, melhora o ganho de peso dos frangos nos primeiros 21 dias de idadeThis research evaluated the effect of the addition of a spent mushroom substrate (SMS Pleurotus sajor caju at different levels on the performance of broiler chicks from 1 to 21, 22 to 38 and 1 to 38 days of age. Five hundred one-day-old Ross-308 chicks were utilized, allocated in a completely randomized design, with five treatments obtained by increased levels of compost on ration (0; 0.5; 1.0; 1.5 and 2.0%, with four replicates of 20 birds per experimental unit. The intake, weight gain, feed conversion, carcass yield, abdominal fat and villus height were evaluated. No effect was observed on intake and feed conversion when the compost was included in the feeding. A positive effect was observed for weight gain from 1 to 21 days of age, with maximum value of 0.67% of SMS, but its addition did not modify the carcass yield and

  16. Experiments on the contact angle of n-propanol on differently prepared silver substrates at various temperatures and implications for the properties of silver nanoparticles

    Science.gov (United States)

    Pinterich, T.; Winkler, P. M.; Vrtala, A. E.; Wagner, P. E.

    2011-08-01

    In this paper we present the results of contact angle measurements between n-propanol and silver substrates in the temperature range from -10 °C to 30 °C. The interest in a potential temperature dependence of contact angles originates from recent experiments by S. Schobesberger et al. (Schobesberger S., Strange temperature dependence observed for heterogeneous nucleation of n-propanol vapor on NaCl particles. Master's thesis, University of Vienna, 2008; Schobesberger S. et al., Experiments on the temperature dependence of heterogeneous nucleation on NaCl and Ag particles. In preparation.) investigating the temperature dependence for heterogeneous nucleation of n-propanol vapour on NaCl and on silver particles. We determined dynamic advancing θ a and receding θ r angles on variously prepared silver probes. The Dynamic Wilhelmy method (Wilhelmy L., Über die Abhängigkeit der Capillaritäts-Constanten des Alkohols von Substanz und Gestalt des benetzten festen Körpers. Ann. Phys. Chem., 199:177-217, 1863) was applied using a Krüss K12 Tensiometer, with a refrigerated double-walled glass top. With respect to its potential influence on heterogeneous nucleation mainly the advancing angle is of interest. The uniform probe geometry required was achieved by accurate cutting and by multiple polishing stages up to the accomplishment of a 0.04 μm grain size. The original probes consist of 925 sterling silver including a 7.5% copper content. Additional coating with silver pro Analysi (p.A.) was applied making use of pure silver powder evaporation process via Physical Vapour Deposition (PVD). Results show that a surface contamination by copper cannot be neglected for the specification of contact angles. It turned out that additional PVD coatings not only change the values of θa but also their temperature dependence. With increasing the number of coatings of a plate the contact angle decreases and its temperature dependence inverts. Since the contact angle hysteresis

  17. Multiple headspace-solid-phase microextraction: an application to quantification of mushroom volatiles.

    Science.gov (United States)

    Costa, Rosaria; Tedone, Laura; De Grazia, Selenia; Dugo, Paola; Mondello, Luigi

    2013-04-03

    Multiple headspace-solid phase microextraction (MHS-SPME) followed by gas chromatography/mass spectrometry (GC-MS) and flame ionization detection (GC-FID) was applied to the identification and quantification of volatiles released by the mushroom Agaricus bisporus, also known as champignon. MHS-SPME allows to perform quantitative analysis of volatiles from solid matrices, free of matrix interferences. Samples analyzed were fresh mushrooms (chopped and homogenized) and mushroom-containing food dressings. 1-Octen-3-ol, 3-octanol, 3-octanone, 1-octen-3-one and benzaldehyde were common constituents of the samples analyzed. Method performance has been tested through the evaluation of limit of detection (LoD, range 0.033-0.078 ng), limit of quantification (LoQ, range 0.111-0.259 ng) and analyte recovery (92.3-108.5%). The results obtained showed quantitative differences among the samples, which can be attributed to critical factors, such as the degree of cell damage upon sample preparation, that are here discussed. Considerations on the mushrooms biochemistry and on the basic principles of MHS analysis are also presented. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Radiocaesium - 137 in cultivated and woodland mushrooms

    International Nuclear Information System (INIS)

    Stankovic, S.; Stankovic, A.

    1997-01-01

    In the present work the results obtained for activity levels of 137 Cs in samples of cultivated mushrooms (Champignons - Agaricus Silvicola Vitt. Peck.) and woodland fruits ( Chantarelle - Cantarelus Cibarius Fr.; Bollets -Boletus Edulis. ex Fr. and Black Trumpets - Cratarelus Conucopioides) are presented. These samples were collected from 1991 to 1996. Biodiversity of the mushrooms regarding their uptake of radionuclides was found. Thus, the maximum value of 137 Cs activity was found in the sample of dry Bollets 375 Bq/kg in 1993. Moreover, the mean activity level of this species was much higher (126 + - 10 Bq/kg) in 1996. than, levels found in any samples taken from the same environment. (author)

  19. Rating of cesium contamination of wild mushrooms

    International Nuclear Information System (INIS)

    Henrich, E.; Zapletal, M.; Friedrich, M.; Haider, W.

    1988-08-01

    'Rating' means here a 5-fold scale with the ranges: more than 100 nCi/kg raw weight - 'very high'; 300 - 100; 3 - 30; 1 - 3; less than 1 nCi/kg - 'very low'. A list of some 50 - 60 different kinds of mushrooms are listed and evaluated in this scale, as from 1988 and from a region with a high Chernobyl fallout. As a comparison, contamination values of 12 mushroom sorts from before the Chernobyl accident, coming from atmospheric nuclear weapons tests, are also given. 2 figs., 5 tabs. (qui)

  20. Microcontroller based automatic temperature control for oyster mushroom plants

    Science.gov (United States)

    Sihombing, P.; Astuti, T. P.; Herriyance; Sitompul, D.

    2018-03-01

    In the cultivation of Oyster Mushrooms need special treatment because oyster mushrooms are susceptible to disease. Mushroom growth will be inhibited if the temperature and humidity are not well controlled because temperature and inertia can affect mold growth. Oyster mushroom growth usually will be optimal at temperatures around 22-28°C and humidity around 70-90%. This problem is often encountered in the cultivation of oyster mushrooms. Therefore it is very important to control the temperature and humidity of the room of oyster mushroom cultivation. In this paper, we developed an automatic temperature monitoring tool in the cultivation of oyster mushroom-based Arduino Uno microcontroller. We have designed a tool that will control the temperature and humidity automatically by Android Smartphone. If the temperature increased more than 28°C in the room of mushroom plants, then this tool will turn on the pump automatically to run water in order to lower the room temperature. And if the room temperature of mushroom plants below of 22°C, then the light will be turned on in order to heat the room. Thus the temperature in the room oyster mushrooms will remain stable so that the growth of oyster mushrooms can grow with good quality.

  1. Trichoderma songyi sp. nov., a new species associated with the pine mushroom (Tricholoma matsutake).

    Science.gov (United States)

    Park, Myung Soo; Oh, Seung-Yoon; Cho, Hae Jin; Fong, Jonathan J; Cheon, Woo-Jae; Lim, Young Woon

    2014-10-01

    A new species, Trichoderma songyi, was found to be associated with the pine mushroom (Tricholoma matsutake) in Korea. This species was isolated from three different substrates: Tricholoma matsutake basidiomata, as well as roots of Pinus densiflora and soil in the fairy ring. Based on its molecular and phenotypic characteristics, we demonstrate that Trichoderma songyi is unique and distinguishable from closely related species. We performed phylogenetic analyses based on two molecular markers, the genes for both translation elongation factor 1-alpha and the second largest subunit of RNA polymerase II. Phylogenetic analyses showed that Trichoderma songyi is closely related to Trichoderma koningii aggregate and Trichoderma caerulescens. Morphologically, Trichoderma songyi can be distinguished from these closely related taxa by its growth rates, colony morphology on PDA in darkness, and coconut-like odour. Due to the economic importance of the pine mushroom, the relationship between Trichoderma songyi and Tricholoma matsutake should be studied further.

  2. Effect of organic-buffer-layer on electrical property and environmental reliability of Ga-doped ZnO films prepared by RF plasma assisted DC magnetron sputtering on plastic substrate

    International Nuclear Information System (INIS)

    Hinoki, Toshio; Kyuhara, Chika; Agura, Hideaki; Yazawa, Kenji; Kinoshita, Kentaro; Ohmi, Koutoku; Kishida, Satoru

    2010-01-01

    Ga-doped ZnO (GZO) transparent conductive films have been prepared by RF plasma assisted DC magnetron sputtering under a reductive atmosphere on organic-buffer-layer (OBL) coated polyethylene telephthalate (PET) substrates without intentionally heating substrates. Electrical and optical properties, crystallinity, and environmental reliability of the GZO films have been investigated. The distributional characteristic of resistivity is observed in the GZO film deposited on the OBL-coated PET substrates. The high resistivity at facing the erosion area in the source target is reduced by providing the RF plasma and H 2 gas near the substrate, resulting in a uniform distribution of the sheet resistance. It has been also found that the increase of resistivity by an accelerated aging test performed under a storage condition at 60 o C and at a relative humidity of 95% is suppressed by employing the OBL. The OBL suppresses the formation of cracks, which are induced by the aging test. These facts are thought to contribute to a high environmental reliability of GZO films on PET substrates. Values of resistivity, Hall mobility and carrier concentration are obtained: 5.0-20 x 10 -3 Ω cm, 4.0 cm 2 /Vs, and 3.8 x 10 20 cm -3 , respectively. An average transmittance of the GZO film including OBL and PET substrate is 78% in a visible region. The OBL enables to realize the practical use of GZO films on PET sheets.

  3. Shiitake Medicinal Mushroom, Lentinus edodes (Higher Basidiomycetes) Productivity and Lignocellulolytic Enzyme Profiles during Wheat Straw and Tree Leaf Bioconversion.

    Science.gov (United States)

    Elisashvili, Vladimir; Kachlishvili, Eva; Asatiani, Mikheil D

    2015-01-01

    Two commercial strains of Lentinus edodes have been comparatively evaluated for their productivity and lignocellulolytic enzyme profiles in mushroom cultivation using wheat straw or tree leaves as the growth substrates. Both substrates are profitable for recycling into shiitake fruit bodies. L. edodes 3715 gave the lowest yield of mushroom during tree leaves bioconversion with the biological efficiency (BE) 74.8% while the L. edodes 3721 BE achieved 83.4%. Cultivation of shiitake on wheat straw, especially in the presence of additional nitrogen source, increased the L. edodes 3721 BE to 92-95.3% owing to the high hydrolases activity and favorable conditions. Despite the quantitative variations, each strain of L. edodes had a similar pattern for secreting enzymes into the wheat straw and tree leaves. The mushrooms laccase and MnP activities were high during substrate colonization and declined rapidly during primordia appearance and fruit body development. While oxidase activity decreased, during the same period cellulases and xylanase activity raised sharply. Both cellulase and xylanase activity peaked at the mature fruit body stage. When mushrooms again shifted to the vegetative growth, oxidase activity gradually increased, whereas the hydrolases activity dropped rapidly. The MnP, CMCase, and FP activities of L. edodes 3721 during cultivation on wheat straw were higher than those during mushroom growth on tree leaves whereas the laccase activity was rather higher in fermentation of tree leaves. Enrichment of wheat straw with an additional nitrogen source rather favored to laccase, MnP, and FPA secretion during the vegetative stage of the L. edodes 3721 growth.

  4. Microbiological effects of olive mill waste addition to substrates for Pleurotus pulmonarius cultivation

    NARCIS (Netherlands)

    Soler-Rivas, C.; Garcia-Rosado, A.; Polonia, I.; Junca-Blanch, G.; Marin, F.R.; Wichers, H.J.

    2006-01-01

    When olive mill wastes (OMWs) and vegetation waters (VWs) obtained during the manufacture of olive oil were added as substrate supplements for the cultivation of Pleurotus pulmonarius the material modified growth of the mushroom and the endemic microbiota of the substrate, in particular the

  5. effects of different substrates on the yield and nutritional content of ...

    African Journals Online (AJOL)

    olu

    2013-04-02

    Apr 2, 2013 ... substrates were used in both experiments to grow the mushrooms and sclerotia, ... The experiments were carried out using a completely randomized design ... substrate (M5) to 3.34 g for mixture of river sand and fermented ...

  6. Sequencing and comparative analysis of the straw mushroom (Volvariella volvacea genome.

    Directory of Open Access Journals (Sweden)

    Dapeng Bao

    Full Text Available Volvariella volvacea, the edible straw mushroom, is a highly nutritious food source that is widely cultivated on a commercial scale in many parts of Asia using agricultural wastes (rice straw, cotton wastes as growth substrates. However, developments in V. volvacea cultivation have been limited due to a low biological efficiency (i.e. conversion of growth substrate to mushroom fruit bodies, sensitivity to low temperatures, and an unclear sexuality pattern that has restricted the breeding of improved strains. We have now sequenced the genome of V. volvacea and assembled it into 62 scaffolds with a total genome size of 35.7 megabases (Mb, containing 11,084 predicted gene models. Comparative analyses were performed with the model species in basidiomycete on mating type system, carbohydrate active enzymes, and fungal oxidative lignin enzymes. We also studied transcriptional regulation of the response to low temperature (4°C. We found that the genome of V. volvacea has many genes that code for enzymes, which are involved in the degradation of cellulose, hemicellulose, and pectin. The molecular genetics of the mating type system in V. volvacea was also found to be similar to the bipolar system in basidiomycetes, suggesting that it is secondary homothallism. Sensitivity to low temperatures could be due to the lack of the initiation of the biosynthesis of unsaturated fatty acids, trehalose and glycogen biosyntheses in this mushroom. Genome sequencing of V. volvacea has improved our understanding of the biological characteristics related to the degradation of the cultivating compost consisting of agricultural waste, the sexual reproduction mechanism, and the sensitivity to low temperatures at the molecular level which in turn will enable us to increase the industrial production of this mushroom.

  7. Sequencing and Comparative Analysis of the Straw Mushroom (Volvariella volvacea) Genome

    Science.gov (United States)

    Bao, Dapeng; Gong, Ming; Zheng, Huajun; Chen, Mingjie; Zhang, Liang; Wang, Hong; Jiang, Jianping; Wu, Lin; Zhu, Yongqiang; Zhu, Gang; Zhou, Yan; Li, Chuanhua; Wang, Shengyue; Zhao, Yan; Zhao, Guoping; Tan, Qi

    2013-01-01

    Volvariella volvacea, the edible straw mushroom, is a highly nutritious food source that is widely cultivated on a commercial scale in many parts of Asia using agricultural wastes (rice straw, cotton wastes) as growth substrates. However, developments in V. volvacea cultivation have been limited due to a low biological efficiency (i.e. conversion of growth substrate to mushroom fruit bodies), sensitivity to low temperatures, and an unclear sexuality pattern that has restricted the breeding of improved strains. We have now sequenced the genome of V. volvacea and assembled it into 62 scaffolds with a total genome size of 35.7 megabases (Mb), containing 11,084 predicted gene models. Comparative analyses were performed with the model species in basidiomycete on mating type system, carbohydrate active enzymes, and fungal oxidative lignin enzymes. We also studied transcriptional regulation of the response to low temperature (4°C). We found that the genome of V. volvacea has many genes that code for enzymes, which are involved in the degradation of cellulose, hemicellulose, and pectin. The molecular genetics of the mating type system in V. volvacea was also found to be similar to the bipolar system in basidiomycetes, suggesting that it is secondary homothallism. Sensitivity to low temperatures could be due to the lack of the initiation of the biosynthesis of unsaturated fatty acids, trehalose and glycogen biosyntheses in this mushroom. Genome sequencing of V. volvacea has improved our understanding of the biological characteristics related to the degradation of the cultivating compost consisting of agricultural waste, the sexual reproduction mechanism, and the sensitivity to low temperatures at the molecular level which in turn will enable us to increase the industrial production of this mushroom. PMID:23526973

  8. Solid substrate fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Tengerdy, R P

    1985-04-01

    Solid Substrate Fermentation (SSF) describes the microbiological tranformation of biological materials in their natural state, in contrast with liquid or submerged fermentations which are carried out in dilute solutions or slurries. The most important industrial microorganisms used in SSF are filamentous fungi and the critical factors in their growth are the control of the moisture level and the temperature. Traditionally, most SSFs are conducted in shallow trays (so that heat build up is avoided) and stacked in a moist chamber, however, the modern SSF should be able to mix large amounts of substrate for a uniform fermentation, maximum automization scale-up of the process, continuous operation and fermentation control and a promising new design is the Helical screw fermenter. At the present time SSF is used in the production of foods (e.g. mushrooms and oriental foods) in municipal, agricultural and industrial solid waste disposal and in the production of enzymes and speciality chemicals but it does not seem likely that it will replace prevalent liquid fermentation technologies. 29 references.

  9. Essential and toxic element determination in edible mushrooms by neutron activation analysis; Determinacao de elementos essenciais e toxicos em cogumelos comestiveis por analise por ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Moura, Patricia Landim da Costa

    2008-07-01

    In this study concentrations of As, Br, Co, Cr, Cs, Fe, K, Na, Rb, Se and Zn were determined in edible mushrooms acquired from commercial establishments in the city of Sao Paulo and directly from Mogi das Cruzes, Suzano, Juquitiba and Mirandopolis producers. The analytical technique used for determining these elements in edible mushrooms was Instrumental Neutron Activation Analysis (INAA). Species of the Agaricus, Lentinus and Pleurotus genera were acquired during the period from November, 2006 to March, 2007. About 150 to 200 mg of freeze-dried mushrooms were irradiated in a neutron flux of 1012 cm{sup -2} s{sup -1} for 8 hours in the IEA-R1 nuclear research reactor at IPEN-CNEN-SP. In order to evaluate the precision and accuracy of the methodology, four reference materials: INCT-MPH-2 Mixed Polish Herbs and INCT-TL-1 Tea Leaves, NIST SRM 1577b Bovine Liver, and the material Mushroom from IAEA were analyzed. Results showed some variation in the element concentrations among the different genera. In some samples, arsenic was found but in low concentrations. Arsenic is probably derived from the contamination from pesticides used in the cultivation, in their the substrates where mushrooms uptake their nutrients. Although there are element concentration variations, mushrooms can still be considered a very rich nutritional source, mainly because of their low concentrations of Na, and due to the good source of K, Fe and Zn. (author)

  10. Hypersensitivity pneumonitis associated with mushroom worker's lung: an update on the clinical significance of the importation of exotic mushroom varieties.

    Science.gov (United States)

    Moore, John E; Convery, Rory P; Millar, B Cherie; Rao, Juluri R; Elborn, J Stuart

    2005-01-01

    Hypersensitivity pneumonitis remains an important industrial disease in mushroom workers. It has a significant morbidity, and early diagnosis and removal from exposure to the antigen are critically important in its management. Recently, several new allergens have been described, particularly those from mushroom species originating in the Far East, which are of clinical significance to workers occupationally exposed to such allergens in cultivation, picking, and packing of commercial mushroom crops. Importing of exotic mushrooms including Shiitake is common in EU countries, and some of the exotic species of mushrooms are cultivated for local markets. This practice may contribute to an increase in clinical cases of mushroom hypersensitivity pneumonitis. This update reviews the recent literature and examines changing trends of mushroom worker's lung, with increased movement of commercial product and labour markets worldwide.

  11. 21 CFR 155.201 - Canned mushrooms.

    Science.gov (United States)

    2010-04-01

    ... percent of the water capacity of the container. (iii) Determine drained weight as specified in § 155.3(a..., packed with a suitable liquid medium which may include water; and may contain one or more safe and... to promote color retention. (4) Labeling requirements. (i) The name of the food is mushrooms. The...

  12. Water retention in mushroom during sustainable processing

    NARCIS (Netherlands)

    Paudel, E.

    2015-01-01

    This thesis deals with the understanding of the water holding capacity of mushroom, in the context of a redesign of their industrial processing. For designing food process the retention of food quality is of the utmost importance. Water holding capacity is an important quality aspect of

  13. Antimicrobial activities of some selected Nigerian mushrooms ...

    African Journals Online (AJOL)

    ... were either weakly inhibited or not inhibited at all. The minimum inhibitory concentration (MIC) ranged between 1.25 and 9.00mg/ml for bacteria and between 10.50 and 17.50mg/ml for fungi. These results are discussed in relation to therapeutic value of the studied mushrooms. African Journal of Biomedical Research Vol.

  14. Neuroscience: Intelligence in the Honeybee Mushroom Body

    OpenAIRE

    Caron, Sophie; Abbott, Larry F.

    2017-01-01

    Intelligence, in most people’s conception, involves combining pieces of evidence to reach non-obvious conclusions. A recent theoretical study shows that intelligence-like brain functions can emerge from simple neural circuits, in this case the honeybee mushroom body.

  15. Effects of ergothioneine from mushrooms (Flammulina velutipes) on melanosis and lipid oxidation of kuruma shrimp (Marsupenaeus japonicus).

    Science.gov (United States)

    Encarnacion, Angel B; Fagutao, Fernand; Hirono, Ikuo; Ushio, Hideki; Ohshima, Toshiaki

    2010-02-24

    The antimelanosic and antioxidative properties of a hot water extract prepared from the fruiting body of the edible mushroom (Flammulina velutipes) were evaluated by dietary supplementation in Kuruma shrimp (Marsupenaeus japonicus) for possible aquaculture application. The extract contained ergothioneine (ERT) at a level of 2.05 mg/mL. A commercial standard of l-ergothioneine (l-ERT) and the mushroom extract showed inhibitory activity against mushroom polyphenoloxidase (PPO). Feeding of the extract had no adverse effects on the immune systems of the shrimp under the present experimental conditions. Supplementation of the extract in the diet significantly suppressed PPO activities in the hemolymphs of the shrimp. Expression of the prophenoloxidase (proPO) gene decreased in the hemocyte of the Kuruma shrimp fed with the mushroom extract. Consequently, development of melanosis was significantly suppressed in the supplement fed shrimp during ice storage. Lipid oxidation was also effectively controlled in the supplement fed group throughout the storage period. In vitro experiments showed that l-ERT effectively inhibited the activation of proPO in the hemocyte lysate supernatant (HLS). The transcript of the proPO gene in the hemocyte showed lower expression in the l-ERT-treated HLS. It was concluded that dietary supplementation of the mushroom extract in shrimp could be a promising approach to control post mortem development of melanosis and lipid oxidation in shrimp muscles.

  16. Multiple headspace-solid-phase microextraction: An application to quantification of mushroom volatiles

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Rosaria; Tedone, Laura; De Grazia, Selenia [Dipartimento Farmaco-chimico, University of Messina, viale Annunziata, 98168 Messina (Italy); Dugo, Paola [Dipartimento Farmaco-chimico, University of Messina, viale Annunziata, 98168 Messina (Italy); Centro Integrato di Ricerca (C.I.R.), Università Campus-Biomedico, Via Álvaro del Portillo, 21, 00128 Roma (Italy); Mondello, Luigi, E-mail: lmondello@unime.it [Dipartimento Farmaco-chimico, University of Messina, viale Annunziata, 98168 Messina (Italy); Centro Integrato di Ricerca (C.I.R.), Università Campus-Biomedico, Via Álvaro del Portillo, 21, 00128 Roma (Italy)

    2013-04-03

    Highlights: ► Multiple headspace extraction-solid phase microextraction (MHS-SPME) has been applied to the analysis of Agaricus bisporus. ► Mushroom flavor is characterized by the presence of compounds with a 8-carbon atoms skeleton. ► Formation of 8-carbon compounds involves a unique fungal biochemical pathway. ► The MHS-SPME allowed to determine quantitatively 5 target analytes of A. bisporus for the first time. -- Abstract: Multiple headspace-solid phase microextraction (MHS-SPME) followed by gas chromatography/mass spectrometry (GC–MS) and flame ionization detection (GC–FID) was applied to the identification and quantification of volatiles released by the mushroom Agaricus bisporus, also known as champignon. MHS-SPME allows to perform quantitative analysis of volatiles from solid matrices, free of matrix interferences. Samples analyzed were fresh mushrooms (chopped and homogenized) and mushroom-containing food dressings. 1-Octen-3-ol, 3-octanol, 3-octanone, 1-octen-3-one and benzaldehyde were common constituents of the samples analyzed. Method performance has been tested through the evaluation of limit of detection (LoD, range 0.033–0.078 ng), limit of quantification (LoQ, range 0.111–0.259 ng) and analyte recovery (92.3–108.5%). The results obtained showed quantitative differences among the samples, which can be attributed to critical factors, such as the degree of cell damage upon sample preparation, that are here discussed. Considerations on the mushrooms biochemistry and on the basic principles of MHS analysis are also presented.

  17. Multiple headspace-solid-phase microextraction: An application to quantification of mushroom volatiles

    International Nuclear Information System (INIS)

    Costa, Rosaria; Tedone, Laura; De Grazia, Selenia; Dugo, Paola; Mondello, Luigi

    2013-01-01

    Highlights: ► Multiple headspace extraction-solid phase microextraction (MHS-SPME) has been applied to the analysis of Agaricus bisporus. ► Mushroom flavor is characterized by the presence of compounds with a 8-carbon atoms skeleton. ► Formation of 8-carbon compounds involves a unique fungal biochemical pathway. ► The MHS-SPME allowed to determine quantitatively 5 target analytes of A. bisporus for the first time. -- Abstract: Multiple headspace-solid phase microextraction (MHS-SPME) followed by gas chromatography/mass spectrometry (GC–MS) and flame ionization detection (GC–FID) was applied to the identification and quantification of volatiles released by the mushroom Agaricus bisporus, also known as champignon. MHS-SPME allows to perform quantitative analysis of volatiles from solid matrices, free of matrix interferences. Samples analyzed were fresh mushrooms (chopped and homogenized) and mushroom-containing food dressings. 1-Octen-3-ol, 3-octanol, 3-octanone, 1-octen-3-one and benzaldehyde were common constituents of the samples analyzed. Method performance has been tested through the evaluation of limit of detection (LoD, range 0.033–0.078 ng), limit of quantification (LoQ, range 0.111–0.259 ng) and analyte recovery (92.3–108.5%). The results obtained showed quantitative differences among the samples, which can be attributed to critical factors, such as the degree of cell damage upon sample preparation, that are here discussed. Considerations on the mushrooms biochemistry and on the basic principles of MHS analysis are also presented

  18. Ferroelectric self-assembled PbTiO{sub 3} perovskite nanostructures onto (100)SrTiO{sub 3} substrates from a novel microemulsion aided sol-gel preparation method

    Energy Technology Data Exchange (ETDEWEB)

    Calzada, M L [Institucion Ciencia de Materiales de Madrid (CSIC), Cantoblanco, E-28049 Madrid (Spain); Torres, M [Institucion Ciencia de Materiales de Madrid (CSIC), Cantoblanco, E-28049 Madrid (Spain); Fuentes-Cobas, L E [Centro de Investigacion en Materiales Avanzados, Chihuahua (Mexico); Mehta, A [Stanford Synchrotron Radiation Laboratory, Menlo Park, CA (United States); Ricote, J [Institucion Ciencia de Materiales de Madrid (CSIC), Cantoblanco, E-28049 Madrid (Spain); Pardo, L [Institucion Ciencia de Materiales de Madrid (CSIC), Cantoblanco, E-28049 Madrid (Spain)

    2007-09-19

    A novel preparation method, which involves the use of microemulsions, sol-gel chemistry and chemical solution deposition, has been developed in this work for the preparation of layers of PbTiO{sub 3} nanostructures supported on SrTiO{sub 3} substrates. A transparent solution was first prepared by mixing a PbTiO{sub 3} precursor sol and a microemulsion formed by water, cyclohexane and the surfactant Brij 30 (polyoxyethylene(4) lauryl ether). The solution was deposited onto the SrTiO{sub 3} substrate by spin-coating and dried under controlled conditions (temperature, time and relative humidity) to favor the rearrangement of the micelles in the deposited coat. After a rapid thermal treatment of crystallization at 650 deg. C, nanostructures with uniform sizes of {approx}40 nm diameter and showing periodicity in some zones of the substrate are obtained. The analysis of these nanostructures by grazing-incidence x-ray synchrotron radiation indicates that they have a perovskite structure with a <100> preferred orientation and that they are under strained conditions. Thermal treatments at higher temperatures produce the collapse of the ordered nanoparticles' network and the formation of larger isolated particles of PbTiO{sub 3} with a truncated-pyramid morphology. Piezoresponse force microscopy studies demonstrate that the spontaneous polarization of these PbTiO{sub 3} nanostructures can be switched and that they have piezoelectric activity. These results support the fabrication strategy here proposed as a promising approach for the preparation of nanoferroelectrics onto substrates of possible interest in future nanoelectronic devices.

  19. Identification of medicinal and poisonous mushroom from Khorramabad, Iran

    Directory of Open Access Journals (Sweden)

    seyede zahra Hosseini

    2010-03-01

    Full Text Available Mushrooms grow in a very wide range of ecological conditions, however their growth vary in different conditions. Mushrooms are a valuable source for antibiotics and they are known as drugs in traditional medicine. Identification and characterization of mushrooms is the first step of their exploitations in drug industry. There are many poisonous species of mushrooms, so their identification is essential for better health of societies and also a good indication for physicians in identification of mushroom poisonings and their cure. Material and Method: In this research the samples of mushroom were collected in Khorramabad district during spring and fall of 2008 and 2009. The macroscopic and microscopic characters of collected mushrooms were observed in field and laboratory and these criteria aligned to the species characters in scientific resources. Results: eight mushroom species namely Collybia maculate coprinus atramentarius three species of Boletus (B. luridus, B. felleus and B. satanas two species of Lactarius (L. piperatus and L. vellereus and Hypholoma capnoides were identified . Discussions: Based on the results of biodiversity of mushrooms in khorramabad district found in the present research, it is concluded that there are valuable resources of mushrooms for medicinal purposes in this area.

  20. Impact of a native Streptomyces flavovirens from mushroom compost on green mold control and yield of Agaricus bisporus.

    Science.gov (United States)

    Šantrić, Ljiljana; Potočnik, Ivana; Radivojević, Ljiljana; Umiljendić, Jelena Gajić; Rekanović, Emil; Duduk, Bojan; Milijašević-Marčić, Svetlana

    2018-05-18

    Thirty-five actinobacterial isolates, obtained from button mushroom (Agaricus bisporus) substrates (i.e., compost in different phases of composting, black peat or casing layer) in Serbia in 2014-2016 were tested in vitro against the causal agents of green mold in cultivated mushroom. Out of six most promising isolates, A06 induced 42.4% in vitro growth inhibition of Trichoderma harzianum T54, and 27.6% inhibition of T. aggressivum f. europaeum T77. The novel strain A06 was identified as Streptomyces flavovirens based on macroscopic and cultural characteristics and 16S rDNA sequence and used in mushroom growing room experiments. Actinobacteria had no negative influence on mycelial growth of the cultivated mushroom in compost in situ. Isolate S. flavovirens A06 enhanced mushroom yield significantly, up to 31.5%. The A06 isolate was more efficient in enhancing yield after inoculation with the compost mold T. aggressivum (26.1%), compared to casing mold T. harzianum (8%). Considering disease incidence, actinobacteria significantly prevented green mold in compost caused by T. aggressivum (6.8%). However, fungicide prochloraz-Mn had a more significant role in reducing symptoms of casing mold, T. harzianum, in comparison with actinobacteria (24.2 and 11.8%, respectively). No significant differences between efficacies of S. flavovirens A06 and the fungicide prochloraz-Mn against T. aggressivum were revealed. These results imply that S. flavovirens A06 can be used to increase mushroom yield and contribute to disease control against the aggressive compost green mold disease caused by Trichoderma aggressivum.

  1. THE FERTILIZATION EFFECT OF PERMANENT MEADOWS WITH SPENT MUSHROM SUBSTRATE ON THE UPTAKING OF MANGANESE, COPPER AND ZINC BY THE MEADOW SWARD

    Directory of Open Access Journals (Sweden)

    Beata Wiśniewska-Kadżajan

    2013-04-01

    Full Text Available The study was conducted in the years 1999–2001 in a meadow with the following fertilizer combinations: control object (without fertilizer, NPK mineral fertilization, fertilizing with manure, manure with NPK fertilization, fertilizing with spent mushroom substrate; spent mushroom substrate with NPK fertilization. The aim of the study was to determine the effect of permanent grassland fertilization both with spent mushroom substrate and the one supplemented with NPK on the uptaking of manganese, copper and zinc by the meadow sward. After the cultivation of mushrooms, in comparison to the standard manure, the substrate used in the experiment was characterized by more than twice higher amount of manganese and zinc. However, the amount of copper in the organic materials was similar. In spite of having supplied lager amount of manganese, zinc and similar amount of copper to the mushrooms substrate, it caused the reduction of the uptake of the elements in the meadow sward. In spite of supplying larger amounts of manganese, zinc and copper the reduction of their uptaking by meadow sward was observed in comparison to manure mushroom substrate. This may be connected with a slightly alkaline reaction of the soil environment, thus limiting the uptake of the studied micronutrients.

  2. Natural radionuclides and 137Cs in commercialized edible mushrooms in Sao Paulo-Brazil

    International Nuclear Information System (INIS)

    Castro, Lilian Pavanelli de

    2008-01-01

    Artificial and natural radionuclides are commonly found in several compartments of the earth's crust. Some mushroom species have a high capacity to absorb radionuclides and toxic elements from the soil. Diet is considered as one of the main routes of radioactive contamination. Therefore, radioactivity measurements in the environment and in food are extremely important to monitor the radiation levels that human can be exposed to either directly or indirectly. Environmental bio monitoring has demonstrated that diverse organisms such as crustaceans, fish and mushrooms are useful when evaluating both the contamination and the quality of the ecosystems. There are actually several radionuclides that can be accumulated in mushrooms, including 40 K, 137 Cs, 232 Th and 238 U. There are few studies in the Southern hemisphere countries, on the natural and artificial radioactivity levels in mushrooms. The present study evaluated 40 K, 137 Cs, 232 Th and 238 U in commercialized edible mushrooms in the state of Sao Paulo, Brazil. The edible mushroom samples were acquired in different commercial establishments in the Sao Paulo metropolitan region, specifically in Municipal Markets. Some samples were acquired directly from producers located in the cities of Mogi das Cruzes, Mirandopolis, Suzano and Juquitiba. About 400g were collected for each edible mushroom species, which included Agaricus sp, Pleurotus sp and Lentinula sp species. All the samples were prepared and stored in polyethylene bottles for approximately 35 days, so that secular equilibrium could be established before counting. The 40 K, 137 Cs, 232 Th and 238 U gamma activities were measured by gamma spectrometry. The equipment consisted of a Hyper pure Germanium detector connected to an electronic system. The detector efficiency was obtained from measurements of reference materials: IAEA-300, IAEA-327 and IAEA-375. The results for the specific activities in edible mushrooms samples ranged fi-om 461 to 1535 Bq kg -1

  3. [Effects of mushroom residue compost on growth and nutrient accumulation of Larix principis-rupprechtii containerized transplants].

    Science.gov (United States)

    Teng, Fei; Liu, Yong; Lou, Jun Shan; Sun, Qiao Yu; Wan, Fang Fang; Yang, Chen; Zhang, Jin

    2016-12-01

    Excessive use of peat may cause some environmental problems. To alleviate the negative effect, an experiment was conducted with the mushroom residue compost to replace peat in Larix principis-rupprechtii containerized transplant production, and the proportion of mushroom residue compost was 0% (T 0 , control), 15% (T 1 ), 18.75% (T 2 ), 25% (T 3 ), 37.50% (T 4 ), 50% (T 5 ), 56.25% (T 6 ) and 60% (T 7 ), respectively. The physical and chemical features of the substrates and its effect on the vegetative growth and nutrient accumulation of L. principis-rupprechtii containerized transplants were studied. The results showed when the proportion of mushroom residue compost in the substrate accounted for 50% or less, there was no significant difference in the transplant height, diameter, and biomass compared with the control, and the nutrient concentration in T 2 , T 4 , T 5 treatments was significantly higher than in T 0 . The pH value was sub-acidic to neutral which was suitable to the transplant growth. When the compost proportion accounted for more than 50%, the pH value was altered to alkali and was not suitable to the transplant growth. When the proportion of mushroom residue compost accounted for 15%, the plant grew best, and the height, diameter, and total biomass got the highest. Therefore, using mushroom residue compost to replace peat in L. principis-rupprechtii containerized transplants cultivation was feasible and the maximum replacement ratio could reach 50%. The high quality transplants could be obtained when the compost replacement ratio was 15%.

  4. Household methods to reduce {sup 137}Cs contents of mushrooms

    Energy Technology Data Exchange (ETDEWEB)

    Kostiainen, E. [Radiation and Nuclear Safety Authority - STUK, Helsinki (Finland)

    2005-09-15

    High radiocaesium contents in different species of mushrooms have been observed in areas contaminated by radiocaesium deposition after the Chernobyl accident in 1986. There has been no significant reduction in the {sup 137}Cs contents of mushrooms during the past ten years, besides via radioactive decay. The internal radiation dose received via mushrooms can be reduced by processing mushrooms before consumption. Various household methods were studied to find out their efficiency to reduce {sup 137}Cs contents of mushrooms. The methods tested were the same as normally used in cooking. The tests were made for the species of edible mushrooms widely consumed. The retention factors for the treatments tested were in most cases 0.2-0.3. The efficiency of treatments in reducing the {sup 137}Cs contents increased with larger water volumes and prolonged treatment times.

  5. Household methods to reduce 137Cs contents of mushrooms

    International Nuclear Information System (INIS)

    Kostiainen, E.

    2005-01-01

    High radiocaesium contents in different species of mushrooms have been observed in areas contaminated by radiocaesium deposition after the Chernobyl accident in 1986. There has been no significant reduction in the 137 Cs contents of mushrooms during the past ten years, besides via radioactive decay. The internal radiation dose received via mushrooms can be reduced by processing mushrooms before consumption. Various household methods were studied to find out their efficiency to reduce 137 Cs contents of mushrooms. The methods tested were the same as normally used in cooking. The tests were made for the species of edible mushrooms widely consumed. The retention factors for the treatments tested were in most cases 0.2-0.3. The efficiency of treatments in reducing the 137 Cs contents increased with larger water volumes and prolonged treatment times

  6. On the anomalies in gold nanoparticles prepared by micelle nanolithography and their impact on one-dimensional material synthesis. Role of substrate, size effects and impurity

    Energy Technology Data Exchange (ETDEWEB)

    Mbenkum, B.N.

    2007-07-23

    The synthesis of one-dimensional (1-D) inorganic semiconductor materials such as nanotubes and silicon (Si) nanowires is usually achieved by catalyst nanoparticlemediated synthetic routes. Despite the well-established nature of this technique, problems such as low temperature synthesis and adequate control of catalyst nanoparticle diameter in order to control 1-D material diameter still prevail. Additionally, the expansion of this technology from crystalline to cheaper substrates such as glass remains demanding. This work employs a previously established selfassembly route to produce controlled spatial distribution of substrate anchored small diameter gold nanoparticles with controlled size. This enabled successful synthesis of Si 1-D structures with controlled diameters less than 20 nm. Low temperature synthesis due to enhanced catalytic activity was achieved via introduction of impurity by treatment of gold nanoparticles in different plasma environments. This enabled Si 1-D structure growth on Si, SiO{sub x}/Si and borosilicate glass substrates at 320 C. Substrate-induced stress affected Si diffusion at the gold nanoparticle determining whether Si nanowires or nanotubes were grown. These results are of technological relevance because low temperature synthesis provides an economical approach and controlled diameter enhances material functionality. Additionally, exploiting substrate-induced stress to influence Si diffusion in nanoparticles provides an alternate route to tuning Si 1-D structure. (orig.)

  7. Influence of Different Supplements on the Commercial Cultivation of Milky White Mushroom

    Science.gov (United States)

    Alam, Nuhu; Amin, Ruhul; Khair, Abul

    2010-01-01

    Calocybe indica, known as milky white mushroom, grows and cultivated in the sub-tropical and temperate zones of South Asia. We investigated the most suitable supplements and their levels for the commercial cultivation of milky white mushroom. Rice bran, maize powder, and wheat bran with their different levels (10, 20, 30, 40, and 50%) were used as supplements to evaluate the yield and yield contributing characteristics of C. indica. Primordia initiation was observed between 13.5 and 19.3 days. The results indicated that the 30% maize powder supplement was effective for producing viable fruiting bodies. The maximum diameters of the pileus and stalk were observed with 30% maize powder. The highest biological and economic yield and biological efficiency were also obtained with 30% maize powder as a supplement. The results indicate that increasing the supplement level resulted in less biological efficiency, and that 30% maize powder was the best supplement level for rice straw substrate to cultivate milky white mushrooms. PMID:23956652

  8. Forest farming of shiitake mushrooms: an integrated evaluation of management practices.

    Science.gov (United States)

    Bruhn, J N; Mihail, J D; Pickens, J B

    2009-12-01

    Two outdoor shiitake (Lentinula edodes) cultivation experiments, established in Missouri USA in 1999 and 2000, produced mushrooms in 2000-2005. We examined shiitake production in response to substrate species, inoculum form, inoculum strain, and inoculation timing, using total mushroom weight per log as the primary response variable with log characteristics as covariates. The significantly greater mushroom weight produced by sugar maple logs compared with white or northern red oak was attributable to the higher proportion of undiscolored wood volume in the maple logs, rather than to bark thickness or log diameter. The "wide temperature range" shiitake strain produced significantly greater yield compared with the "warm" or "cold" weather strains. Both the wide-range and warm-weather strains were stimulated to fruit by significant rain events, while the cold-weather strain was responsive to temperature. Inoculation with sawdust spawn gave significantly greater yield than colonized wooden dowels or pre-packaged "thimble" plug inoculum. The second and third full years following inoculation were the most productive.

  9. Accumulation factors of mercury in mushrooms from Zaborski Landscape Park, Poland.

    Science.gov (United States)

    Falandysz, Jerzy; Lipka, Krzysztof; Gucia, Magdalena; Kawano, Masahide; Strumnik, Katarzyna; Kannan, Kurunthachalam

    2002-11-01

    Total mercury concentrations were determined by cold-vapour atomic absorption spectroscopy (CV-AAS) in 117 samples of caps, 117 of stalks and 47 of whole fruiting bodies of 13 species of wild mushrooms and in 164 underlying soil substrate collected from Zaborski Landscape Park during 1997 and 1998. The study area is a background, forested site with rural landscape and no known local sources of mercury emission. Mean mercury concentrations in mushrooms varied widely (range: 50 +/- 20 to 3700 +/- 1700 ng/g, dry matter) depending on the site and mushroom species investigated. However, mercury concentrations in soil samples varied less (range: 3.0 +/- 3.0 to 43 +/- 17 ng/g dry matter). Fruiting bodies of Common Puffball (Lycoperdon perlatum) and King Bolete (Boletus edulis) contained the greatest concentrations of mercury of 3700 +/- 1700 and 2600 +/- 1200 ng/g dry matter, respectively. A positive correlation existed between mercury concentrations in the caps of Slippery Jack (Suillus luteus) and Fly Agaric (Amanita muscaria) (p Suillus grevillei) and King Bolete (B. edulis) and varied between 130 +/- 78 and 160 +/- 120, while for the other species BCFs were between 4.0 +/- 6.0 and 61 +/- 20 in caps, and 4.4 +/- 3.1 and 70 +/- 68 in stalks. The concentration ratios of Hg in cap to stalk were from 1.1 +/- 0.5 for Poison Pax (Paxillus involutus) to 2.7 +/- 1.7 in Larch Bolete (S. grevillei).

  10. [Mercury in three species of Suillus mushroom from some sites in Poland].

    Science.gov (United States)

    Mielewska, Dominika; Stefańska, Aleksandra; Wenta, Justyna; Mazur, Michalina; Bielawski, Leszek; Danisiewicz, Dorota; Dryzałowska, Anna; Falandysz, Jerzy

    2008-01-01

    Total mercury content have been determined in fruiting bodies of Variegated Bolete (Suillus variegates), European Cow Bolete (S. bovinus) and Slippery Jack (S. luteus) and in underlying to mushroom's surface layer of soil substrate collected from several spatially distant one from another sites in Poland. All three Suillus mushroom species independent of the site characterized were by small mercury content. The arithmetic mean values of mercury concentration in caps and stipes, respectively, were: 0.17 +/- 0.07-0.22 +/- 0.12 and 0.047 +/- 0.015-0.071 +/- 0.035 microg/g dry weight for Variegated Bolete; 0.28 +/- 0.11-0.79 +/- 0.40 and 0.17 +/- 0.07- 0.51 +/- 0.22 microg/g dw for European Cow Bolete, and 0.095 +/- 0.082-0.17 +/- 0.05 and 0.045 +/- 0.026- 0.070 +/- 0.026 microg/g dw for Slippery Jack. All three species of Suillus mushrooms bio-concentrated mercury (BCF > 1). European Cow Bolete bioconcentrated mercury relatively more efficiently when compared to two other species, and means of BCF value of this element in its caps ranged from 18 +/- 10 to 45 +/- 20, and in stipes from 9.4 +/- 7.5 to 29 +/- 11. A level of surface soil pollution with mercury was low and averaged from 0.017 +/- 0.003 do 0.029 +/- 0.020 microg/g dw.

  11. Analysis of some metallic elements and metalloids composition and relationships in parasol mushroom Macrolepiota procera.

    Science.gov (United States)

    Falandysz, Jerzy; Sapkota, Atindra; Dryżałowska, Anna; Mędyk, Małgorzata; Feng, Xinbin

    2017-06-01

    The aim of the study was to characterise the multi-elemental composition and associations between a group of 32 elements and 16 rare earth elements collected by mycelium from growing substrates and accumulated in fruiting bodies of Macrolepiota procera from 16 sites from the lowland areas of Poland. The elements were quantified by inductively coupled plasma quadrupole mass spectrometry using validated method. The correlation matrix obtained from a possible 48 × 16 data matrix has been used to examine if any association exits between 48 elements in mushrooms foraged from 16 sampling localizations by multivariate approach using principal component (PC) analysis. The model could explain up to 93% variability by eight factors for which an eigenvalue value was ≥1. Absolute values of the correlation coefficient were above 0.72 (significance at p < 0.05) for 43 elements. From a point of view by consumer, the absolute content of Cd, Hg, Pb in caps of M. procera collected from background (unpolluted) areas could be considered elevated while sporadic/occasional ingestion of this mushroom is considered safe. The multivariate functional analysis revealed on associated accumulation of many elements in this mushroom. M. procera seem to possess some features of a bio-indicative species for anthropogenic Pb but also for some geogenic metals.

  12. Dung-associated, Potentially Hallucinogenic Mushrooms from Taiwan

    Directory of Open Access Journals (Sweden)

    Yen-Wen Wang

    2015-12-01

    Full Text Available To identify potentially hallucinogenic mushrooms, dung-associated mushrooms collected from Qingtiangang, Yangmingshan National Park were subjected to a detailed morphological investigation and phylogentic analysis. The investigation identified four taxa: a recorded species (Panaeolus antillarum; a new combination (Conocybe nitrophila; and two new species (Psilocybe angulospora, Protostropharia ovalispora. Morphological and molecular characteristics of the collected mushrooms were compared with allied fungal taxa.

  13. Submerged cultivation of medicinal mushrooms: bioprocesses and products (review).

    Science.gov (United States)

    Elisashvili, Vladimir

    2012-01-01

    Medicinal mushrooms belonging to higher Basidiomycetes are an immensely rich yet largely untapped resource of useful, easily accessible, natural compounds with various biological activities that may promote human well-being. The medicinal properties are found in various cellular components and secondary metabolites (polysaccharides, proteins and their complexes, phenolic compounds, polyketides, triterpenoids, steroids, alkaloids, nucleotides, etc.), which have been isolated and identified from the fruiting bodies, culture mycelium, and culture broth of mushrooms. Some of these compounds have cholesterol-lowering, anti-diabetic, antioxidant, antitumor, immunomodulating, antimicrobial, and antiviral activities ready for industrial trials and further commercialization, while others are in various stages of development. Recently, the submerged cultivation of medicinal mushrooms has received a great deal of attention as a promising and reproducible alternative for the efficient production of mushroom mycelium and metabolites. Submerged cultivation of mushrooms has significant industrial potential, but its success on a commercial scale depends on increasing product yields and development of novel production systems that address the problems associated with this technique of mushroom cultivation. In spite of many researchers' efforts for the production of bioactive metabolites by mushrooms, the physiological and engineering aspects of submerged cultures are still far from being thoroughly studied. The vast majority of studies have focused on polysaccharide and ganoderic acid production in submerged cultivation of medicinal mushrooms, and very little has been written so far on the antioxidant and hemagglutinating activity of submerged mushroom cultures. The purpose of this review is to provide an update of the present state of the art and future prospects of submerged cultivation of medicinal mushrooms to produce mycelium and bioactive metabolites, and to make a

  14. Mushroom refinement endeavor auspicate non green revolution in the offing

    OpenAIRE

    SHAUKET AHMED PALA; ABDUL HAMID WANI; ROUF HAMZA BODA; BILAL AHMAD WANI

    2014-01-01

    Pala SA, Wani AH, Boda RH, Wani BA. 2014. Mushroom refinement endeavor auspicate non green revolution in the offing. Nusantara Bioscience 6: 173-185. Mushroom can serve as food, tonic, and as medicine thus make people healthier, fitter and happier. They have a cracking potential for generating great socioeconomic impact in human welfare at local, national and international level. With the help of allied mushroom farming we can easily tackle the problem of food for growing world population; re...

  15. Accumulation of Heavy Metals by Wild Mushrooms in Ibadan, Nigeria

    OpenAIRE

    Chinatu Charity Ndimele; Prince Emeka Ndimele; Kanayo Stephen Chukwuka

    2017-01-01

    Background. Many companies in Nigeria generate industrial effluents, including heavy metals. These metals can be accumulated by biota such as mushrooms, which are then eaten by the populace. Objectives. The present study investigates the metal content of wild mushrooms in order to educate the local population on the safety of their consumption. Methods. Seven different species of wild mushrooms (Cortinarius melliolens, Chlorophyllum brunneum, Pleurotus florida, Volvariella speciosa, Can...

  16. 137Cs content in edible mushrooms of the Transcarpathian region

    Directory of Open Access Journals (Sweden)

    O. O. Parlag

    2013-03-01

    Full Text Available Edible mushrooms (Boletus edulis Bull.: Fr. and Leccinum scabrum (Bull.: Fr. S.F.Gray of Transcarpathian region were analyzed on content of 137Cs. Specific activity of 137Cs in collected mushrooms did not exceed 354 ± 53 Bq/kg (dry substance. Estimation of the contribution into internal exposure dose of population for the condi-tion of 1 kg of mushrooms consumption is carried out.

  17. Medicinal mushroom science: Current perspectives, advances, evidences, and challenges

    Directory of Open Access Journals (Sweden)

    Solomon P Wasser

    2014-12-01

    Full Text Available The main target of the present review is to draw attention to the current perspectives, advances, evidences, challenges, and future development of medicinal mushroom science in the 21 st century. Medicinal mushrooms and fungi are thought to possess approximately 130 medicinal functions, including antitumor, immunomodulating, antioxidant, radical scavenging, cardiovascular, anti-hypercholesterolemic, antiviral, antibacterial, anti-parasitic, antifungal, detoxification, hepatoprotective, and antidiabetic effects. Many, if not all, higher Basidiomycetes mushrooms contain biologically active compounds in fruit bodies, cultured mycelium, and cultured broth. Special attention is paid to mushroom polysaccharides. The data on mushroom polysaccharides and different secondary metabolites are summarized for approximately 700 species of higher hetero- and homobasidiomycetes. Numerous bioactive polysaccharides or polysaccharide-protein complexes from the medicinal mushrooms described appear to enhance innate and cell-mediated immune responses, and exhibit antitumor activities in animals and humans. Whilst the mechanism of their antitumor actions is still not completely understood, stimulation and modulation of key host immune responses by these mushroom compounds appear central. Polysaccharides and low-molecular-weight secondary metabolites are particularly important due to their antitumor and immunostimulating properties. Several of the mushroom compounds have been subjected to Phase I, II, and III clinical trials, and are used extensively and successfully in Asia to treat various cancers and other diseases. Special attention is given to many important unsolved problems in the study of medicinal mushrooms.

  18. Neuronal health - can culinary and medicinal mushrooms help?

    Science.gov (United States)

    Sabaratnam, Vikineswary; Kah-Hui, Wong; Naidu, Murali; Rosie David, Pamela

    2013-01-01

    Hericium erinaceus a culinary and medicinal mushroom is a well established candidate for brain and nerve health. Ganoderma lucidum, Grifola frondosa and Sarcodon scabrosus have been reported to have neurite outgrowth and neuronal health benefits. The number of mushrooms, however, studied for neurohealth activity are few compared to the more than 2 000 species of edible and / or medicinal mushrooms identified. In the on-going search for other potent culinary and / or medicinal mushrooms, indigenous mushrooms used in traditional medicines such as Lignosus rhinocerotis and Ganoderma neo-japonicum are also being investigated. Further, the edible mushroom, Pleurotus giganteus can be a potential candidate, too. Can these edible and medicinal mushrooms be tapped to tackle the health concerns of the aging population which is projected to be more than 80-90 million of people age 65 and above in 2050 who may be affected by age-related neurodegenerative disorders. Scientific validation is needed if these mushrooms are to be considered and this can be achieved by understanding the molecular and biochemical mechanisms involved in the stimulation of neurite outgrowth. Though it is difficult to extrapolate the in vitro studies to what may happen in the human brain, studies have shown that there can be improvement in cognitive abilities of the aged if the mushroom is incorporated in their daily diets.

  19. Neuronal Health – Can Culinary and Medicinal Mushrooms Help?

    Science.gov (United States)

    Sabaratnam, Vikineswary; Kah-Hui, Wong; Naidu, Murali; Rosie David, Pamela

    2013-01-01

    Hericium erinaceus a culinary and medicinal mushroom is a well established candidate for brain and nerve health. Ganoderma lucidum, Grifola frondosa and Sarcodon scabrosus have been reported to have neurite outgrowth and neuronal health benefits. The number of mushrooms, however, studied for neurohealth activity are few compared to the more than 2 000 species of edible and / or medicinal mushrooms identified. In the on-going search for other potent culinary and / or medicinal mushrooms, indigenous mushrooms used in traditional medicines such as Lignosus rhinocerotis and Ganoderma neo-japonicum are also being investigated. Further, the edible mushroom, Pleurotus giganteus can be a potential candidate, too. Can these edible and medicinal mushrooms be tapped to tackle the health concerns of the aging population which is projected to be more than 80-90 million of people age 65 and above in 2050 who may be affected by age-related neurodegenerative disorders. Scientific validation is needed if these mushrooms are to be considered and this can be achieved by understanding the molecular and biochemical mechanisms involved in the stimulation of neurite outgrowth. Though it is difficult to extrapolate the in vitro studies to what may happen in the human brain, studies have shown that there can be improvement in cognitive abilities of the aged if the mushroom is incorporated in their daily diets. PMID:24716157

  20. Edible Mushrooms: Improving Human Health and Promoting Quality Life

    Directory of Open Access Journals (Sweden)

    María Elena Valverde

    2015-01-01

    Full Text Available Mushrooms have been consumed since earliest history; ancient Greeks believed that mushrooms provided strength for warriors in battle, and the Romans perceived them as the “Food of the Gods.” For centuries, the Chinese culture has treasured mushrooms as a health food, an “elixir of life.” They have been part of the human culture for thousands of years and have considerable interest in the most important civilizations in history because of their sensory characteristics; they have been recognized for their attractive culinary attributes. Nowadays, mushrooms are popular valuable foods because they are low in calories, carbohydrates, fat, and sodium: also, they are cholesterol-free. Besides, mushrooms provide important nutrients, including selenium, potassium, riboflavin, niacin, vitamin D, proteins, and fiber. All together with a long history as food source, mushrooms are important for their healing capacities and properties in traditional medicine. It has reported beneficial effects for health and treatment of some diseases. Many nutraceutical properties are described in mushrooms, such as prevention or treatment of Parkinson, Alzheimer, hypertension, and high risk of stroke. They are also utilized to reduce the likelihood of cancer invasion and metastasis due to antitumoral attributes. Mushrooms act as antibacterial, immune system enhancer and cholesterol lowering agents; additionally, they are important sources of bioactive compounds. As a result of these properties, some mushroom extracts are used to promote human health and are found as dietary supplements.

  1. Neuronal Health – Can Culinary and Medicinal Mushrooms Help?

    Directory of Open Access Journals (Sweden)

    Vikineswary Sabaratnam

    2013-01-01

    Full Text Available Hericium erinaceus a culinary and medicinal mushroom is a well established candidate for brain and nerve health. Ganoderma lucidum, Grifola frondosa and Sarcodon scabrosus have been reported to have neurite outgrowth and neuronal health benefits. The number of mushrooms, however, studied for neurohealth activity are few compared to the more than 2 000 species of edible and / or medicinal mushrooms identified. In the on-going search for other potent culinary and / or medicinal mushrooms, indigenous mushrooms used in traditional medicines such as Lignosus rhinocerotis and Ganoderma neo-japonicum are also being investigated. Further, the edible mushroom, Pleurotus giganteus can be a potential candidate, too. Can these edible and medicinal mushrooms be tapped to tackle the health concerns of the aging population which is projected to be more than 80-90 million of people age 65 and above in 2050 who may be affected by age-related neurodegenerative disorders. Scientific validation is needed if these mushrooms are to be considered and this can be achieved by understanding the molecular and biochemical mechanisms involved in the stimulation of neurite outgrowth. Though it is difficult to extrapolate the in vitro studies to what may happen in the human brain, studies have shown that there can be improvement in cognitive abilities of the aged if the mushroom is incorporated in their daily diets.

  2. The role of Drosophila mushroom body signaling in olfactory memory.

    Science.gov (United States)

    McGuire, S E; Le, P T; Davis, R L

    2001-08-17

    The mushroom bodies of the Drosophila brain are important for olfactory learning and memory. To investigate the requirement for mushroom body signaling during the different phases of memory processing, we transiently inactivated neurotransmission through this region of the brain by expressing a temperature-sensitive allele of the shibire dynamin guanosine triphosphatase, which is required for synaptic transmission. Inactivation of mushroom body signaling through alpha/beta neurons during different phases of memory processing revealed a requirement for mushroom body signaling during memory retrieval, but not during acquisition or consolidation.

  3. Anaerobic hydrogen production from unhydrolyzed mushroom farm waste by indigenous microbiota.

    Science.gov (United States)

    Lin, Chiu-Yue; Lay, Chyi-How; Sung, I-Yuan; Sen, Biswarup; Chen, Chin-Chao

    2017-10-01

    The cultivation of mushrooms generates large amounts of waste polypropylene bags stuffed with wood flour and bacterial nutrients that makes the mushroom waste (MW) a potential feedstock for anaerobic bioH 2 fermentation. MW indigenous bacteria were enriched using thermophilic temperature (55°C) for use as the seed inoculum without any external seeding. The peak hydrogen production rate (6.84 mmol H 2 /L-d) was obtained with cultivation pH 8 and substrate concentration of 60 g MW/L in batch fermentation. Hydrogen production yield (HY) is pH and substrate concentration dependent with an HY decline occurring at pH and substrate concentration increasing from pH 8 to 10 and 60 to 80 g MW/L, respectively. The fermentation bioH 2 production from MW is in an acetate-type metabolic path. Copyright © 2017 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  4. [The Kombucha mushroom: two different opinions].

    Science.gov (United States)

    Gamundi, R; Valdivia, M

    1995-01-01

    Positive and negative views of the Kombucha mushroom, a popular remedy in Asia, are expressed. The Kombucha mushroom, used for centuries, is believed to have antibiotic tendencies and to strengthen the immune and metabolic systems. Studies show that the tea, made from fermented fungus, has high levels of B vitamins. Caution should be used during fermentation because exposing the fungus to sunlight may adversely affect the process. The mold in which the fungus grows may contain aspergillus, a fungal infection which may be fatal to HIV-positive persons. The tea is being commercialized as a stimulant of the immune system but is unpopular in the U.S. due to its toxicity risks. Public awareness messages must convey the danger of overstimulating the immune system of HIV-positive patients, whose immune systems are already overstimulated. Furthermore, the process of fermentation may encourage the growth of other organisms which produce medical complications in HIV-positive patients.

  5. The genetic basis of natural variation in mushroom body size in Drosophila melanogaster.

    Science.gov (United States)

    Zwarts, Liesbeth; Vanden Broeck, Lies; Cappuyns, Elisa; Ayroles, Julien F; Magwire, Michael M; Vulsteke, Veerle; Clements, Jason; Mackay, Trudy F C; Callaerts, Patrick

    2015-12-11

    Genetic variation in brain size may provide the basis for the evolution of the brain and complex behaviours. The genetic substrate and the selective pressures acting on brain size are poorly understood. Here we use the Drosophila Genetic Reference Panel to map polymorphic variants affecting natural variation in mushroom body morphology. We identify 139 genes and 39 transcription factors and confirm effects on development and adult plasticity. We show correlations between morphology and aggression, sleep and lifespan. We propose that natural variation in adult brain size is controlled by interaction of the environment with gene networks controlling development and plasticity.

  6. Chemical composition of Pleurotus pulmonarius (Fr. Quél., substrates and residue after cultivation

    Directory of Open Access Journals (Sweden)

    Silva Sueli Oliveira

    2002-01-01

    Full Text Available The cultivation of Pleurotus pulmonarius was carried out on different substrate: cotton waste (A leaves of Cymbopogon citratus (B and leaves of Panicum maximum Jacq. (C. The mushroom had a varied chemical composition; nevertheless they contained a good composition for to be used as a good source of protein for human kind. The results showed the higher protein content (29.19% and fibre (9.0% for the mushroom that were cultivated on cotton peel. The substrate composition and the residue composition after the mushroom harvest were: Protein for the substrate "A" (10.63% and 9.35%, "B" (7.87% and 4.24% and "C" (7.55% and 5.90 %; Lipids "A" (4.17% and 2.03%, "B"(2.77% and 3.20% and "C" (0.91% and 2.05%; Fibres "A" (49.02% and 37.02%, "B" (28.40% and 23.26% and "C" (37.50% and 26.66% respectively. The substrate "A" showed 0.048% of iron and "C" 0.14% of magnesium, 0.31% of potassium and 0.26% of calcium. In the substrate "B" the quantity of the minerals were very low in comparison to the other substrates. The residues after the harvest of mushroom could be used as fertiliser or as complement in the composition for animal feed.

  7. Diversity of edible mushrooms in pakistan

    International Nuclear Information System (INIS)

    Sultana, K.; Shinwari, Z.K.; Iftikhar, F.

    2007-01-01

    Fifty six edible species of mushrooms are reported from Pakistan including four from Balochistan, three from Sindh, five from Punjab and 44 from NWFP and Azad Kashmir. Some of species being commercially exploited in the world are Agaricus bisporus, Auricularia spp. Coprinus comatus, Flammulina vellutipes, Lentinus edodes, Phellorina inquinans, Pleurotus ostreatus, Stropharia rugosoannulata, Volvariella volvacea. Because of over collection, urbanization and deforestation, some of species are threatened of extinction. (author)

  8. Mushrooms as Possible Antioxidant and Antimicrobial Agents

    Science.gov (United States)

    Kosanić, Marijana; Ranković, Branislav; Dašić, Marko

    2012-01-01

    The aim of the study is to examine in-vitro antioxidant and antimicrobial activity of the acetonic and methanolic extracts of the mushrooms Boletus aestivalis, Boletus edulis and Leccinum carpini. Antioxidant activity was evaluated by using free radical scavenging activity and reducing power. In addition, total content of phenol and flavonoid in extracts were determined as pyrocatechol equivalent, and as rutin equivalent, respectively. As a result of the study acetonic extracts from Boletus edulis was more powerful antioxidant activity with IC50 value of 4.72 μg/mL which was similar or greater than the standard antioxidants, ascorbic acid (IC50 = 4.22 μg/mL), BHA (IC50 = 6.42 μg/mL) and α-tocopherol (IC50 = 62.43 μg/mL). Moreover, the tested extracts had effective reducing power. A significant relationship between total phenolic and flavonoid contents and their antioxidative activities was significantly observed. The antimicrobial activity of each extract was estimated by determination of the minimum inhibitory concentration by using microdilution plate method against five species of bacteria and five species of fungi. Generally, the tested mushroom extracts had relatively strong antimicrobial activity against the tested microorganisms. The minimum inhibitory concentration for both extracts related to the tested bacteria and fungi were 1.25 - 10 mg/ mL. The present study shows that tested mushroom species demonstrated a strong antioxidant and antimicrobial activity. It suggests that mushroom may be used as good sources of natural antioxidants and for pharmaceutical purposes in treating of various deseases. PMID:24250542

  9. DEHYDRATION OF EDIBLE MUSHROOMS (PLEUROTUS OSTREATUS)

    OpenAIRE

    Salas de la Torre, N.; Bazán, D.; Osorio, A.; Cornejo, O.; Carrero, E.

    2014-01-01

    The edible mushroom Pleurotus ostreatus have been subjected to thermal, chemical and thermal-chemical treatment. The results show that the chemical treatment produces a more effective enzymatic inactivation compared to the other two treatments. Also, the experimental study of fungi dehydration carried out at 55 ° C reveals that the critical moisture content is 10.4 kg water / kg dry solids, the equilibrium moisture is 0.22 kg water / kg of solid . Los hongos comestibles Pleurotus ostreatus...

  10. Preparation of the La0.8Sr0.2MnO3 films on STO and LAO substrates by excimer laser-assisted metal organic deposition using the KrF laser

    International Nuclear Information System (INIS)

    Tsuchiya, T.; Daoudi, K.; Manabe, T.; Yamaguchi, I.; Kumagai, T.

    2007-01-01

    La 0.8 Sr 0.2 MnO 3 films were prepared on SrTiO 3 (STO) and LaAlO 3 (LAO) substrates using excimer laser-assisted metal organic deposition (ELAMOD). For the LAO substrate, no epitaxial La 0.8 Sr 0.2 MnO 3 film was obtained by laser irradiation in the fluence range from 60 to 110 mJ/cm 2 with heating at 500 deg. C. On the other hand, an epitaxial La 0.8 Sr 0.2 MnO 3 film on the STO substrate was formed by laser irradiation in the fluence range from 60 to 100 mJ/cm 2 with heating at 500 deg. C. To optimize the electrical properties for an IR sensor, the effects of the laser fluence, the irradiation time and the film thickness on the temperature dependence of the resistance and temperature coefficient of resistance (TCR: defined as 1/R.(dR/dT)) of the LSMO films were investigated. An LSMO film on the STO substrate that showed the maximum TCR of 3.9% at 265 K was obtained by the ELAMOD process using the KrF laser

  11. Wild growing mushrooms for the Edible City? Cadmium and lead content in edible mushrooms harvested within the urban agglomeration of Berlin, Germany

    International Nuclear Information System (INIS)

    Schlecht, Martin Thomas; Säumel, Ina

    2015-01-01

    Health effects by consuming urban garden products are discussed controversially due to high urban pollution loads. We sampled wild edible mushrooms of different habitats and commercial mushroom cultivars exposed to high traffic areas within Berlin, Germany. We determined the content of cadmium and lead in the fruiting bodies and analysed how the local setting shaped the concentration patterns. EU standards for cultivated mushrooms were exceeded by 86% of the wild mushroom samples for lead and by 54% for cadmium but not by mushroom cultures. We revealed significant differences in trace metal content depending on species, trophic status, habitat and local traffic burden. Higher overall traffic burden increased trace metal content in the biomass of wild mushrooms, whereas cultivated mushrooms exposed to inner city high traffic areas had significantly lower trace metal contents. Based on these we discuss the consequences for the consumption of mushrooms originating from urban areas. - Highlights: • Popular edible mushrooms display large variations in Cd and Pb content. • Low accumulating species are Sparassis crispa, Boletus luridus, or Boletus badius. • High accumulating species are Agaricus ssp., Russula vesca, or Calvatia gigantea. • Cd and Pb content in wild growing edible mushrooms were mostly above EU limits for cultivated mushrooms. • Cd and Pb content in commercial mushrooms cultures were regularly below EU limits for cultivated mushrooms. - Commercial mushroom cultures can be integrated into ‘Edible City’ approaches, but majority of wild growing mushroom samples highly accumulate trace metals

  12. Large tunneling anisotropic magnetoresistance in La0.7Sr0.3MnO3/pentacene/Cu structures prepared on SrTiO3 (110) substrates

    Science.gov (United States)

    Kamiya, Takeshi; Miyahara, Chihiro; Tada, Hirokazu

    2017-01-01

    We investigated tunneling anisotropic magnetoresistance (TAMR) at the interface between pentacene and La0.7Sr0.3MnO3 (LSMO) thin films prepared on SrTiO3 (STO) (110) substrates. The dependence of the TAMR ratio on the magnetic field strength was approximately ten times larger than that of the magnetic field angle at a high magnetic field. This large difference in the TAMR ratio is explained by the interface magnetic anisotropy of strain-induced LSMO thin films on a STO (110) substrate, which has an easy axis with an out-of-plane component. We also note that the TAMR owing to out-of-plane magnetization was positive at each angle of the in-plane magnetic field. This result implies that active control of the interface magnetic anisotropy between organic materials and ferromagnetic metals should realize nonvolatile and high-efficiency TAMR devices.

  13. Photoluminescence and cathodoluminescence of YVO{sub 4}:Sm{sup 3+} thin films prepared by pulsed laser deposition method with various substrates

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Hyun Kyoung; Chung, Jong Won; Moon, Byung Kee; Choi, Byung Chun; Jeong, Jung Hyun [Pukyong National University, Dept. of Physics, Busan (Korea); Yi, Soung-Soo [Silla University, Dept. of Electronic Material Engineering, Busan (Korea); Kim, Jung Hwan [Dongeui University, Dept. of Physics, Busan (Korea)

    2008-08-15

    YVO{sub 4}:Sm{sup 3+} films have been deposited on different substrates using pulsed laser deposition method. The films were deposited on fused silica, MgO(100), Al{sub 2}O{sub 3}(0001), and Si(100) substrates. The crystallinity and surface morphology of the films were investigated using X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. The films grown on the different substrates have different crystallinity and morphology. The full-width at half-maximum (FWHM) of (200) peak are 0.20, 0.14, 0.12, and 0.18 for fused silica, MgO(100), Al{sub 2}O{sub 3}(0001), and Si(100), respectively. The crystallite size, estimated by using Scherrer's formula, of phosphors grown on fused silica, MgO(100), Al{sub 2}O{sub 3}(0001), and Si(100) was about 7.25, 10.08, 11.88, and 8.14 nm, respectively and it has a maximum at 11.88 nm for the thin film grown on Al{sub 2}O{sub 3}(0001). The photoluminescence and the cathodoluminescence spectra were measured at room temperature using a luminescence spectrometer and the emitted radiation was dominated by the red emission peak at 602 nm radiated from the transition of {sup 4}G{sub 5/2}{yields}{sup 6}H{sub 7/2}. YVO{sub 4}:Sm{sup 3+} films have maximum PL intensity for the films grown on the Al{sub 2}O{sub 3}(0001) substrate and the brightness of the films were higher 1.3, 2.9, and 5.0 times in comparison with that of the YVO{sub 4}:Sm{sup 3+} films grown on MgO(100), fused silica, and Si (100) substrates, respectively. The crystallinity, surface morphology and luminescence spectra of thin-film phosphors were highly dependent on substrates. (orig.)

  14. MERCURY IN EDIBLE WILD-GROWN MUSHROOMS FROM HISTORICAL MINING AREA – SLOVAKIA: BIOACCUMULATION AND RISK ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Július Árvay

    2015-02-01

    Full Text Available In the present paper, we focused on assessment of the contamination levels of five species (n = 33 of edible wild mushrooms (Macrolepiota procera, Boletus reticulatus, Suillus grevillei, Russula xerampelina and Xerocomellus chrysenteron. We collected samples of above-ground parts of the macroscopic fungi species in historical mining and processing area surrounding Banská Bystrica (Central Slovakia in 2014. Within 2 m radius of the samples, we also took samples of underlying substrate. On the basis of the substrate, along with the monitored contaminant – mercury, we calculated bioaccumulation factors for individual species and their anatomical parts (cap and stipe. From the obtained results of the mercury content in the edible mushrooms, we then determined provisionally tolerable weekly intake (PTWI. The limit value for mercury (0.350 mg Hg kg-1 for an individual with average weight of 70 kg is defined by the World Health Organization (WHO. Our results suggest that despite the relatively low level of Hg in the underlying substrate, the species Macrolepiota procera (1.98 mg kg-1 ± 68.2 (0.41 - 3.20 mg kg-1 DW is characterized by extremely high bioaccumulation ability, as confirmed by the bioaccumulation factors (BAFc = 15.3; BAFs = 8.02. PTWI value was exceeded by almost 20%. In case of the other studied edible wild mushroom species, we did not record any increased risk of mercury intake by consumers. Generally it can be stated that consumption of wild mushrooms represents a relatively small but significant risk of negative impact on the consumer´s health.

  15. Effect of medicinal mushrooms on blood cells under conditions of diabetes mellitus

    Science.gov (United States)

    Vitak, Taras; Yurkiv, Borys; Wasser, Solomon; Nevo, Eviatar; Sybirna, Natalia

    2017-01-01

    Diabetes mellitus (DM) is the third most common non-infectious disease leading to early disability and high mortality. Moreover, the number of patients is growing every year. The main symptom of DM is hyperglycemia. Increased levels of blood glucose activate polyol, hexosamine, and protein kinase metabolic pathways cause the intensification of non-enzymatic glycosylation and nitration of macromolecules. This, in turn, leads to the development of oxidative and nitrative stresses and secondary complications, such as different kinds of micro- and macroangiopathies. Metabolic disorders caused by insulin deficiency in diabetes significantly impede the functioning of a homeostasis system, which change the physical, biochemical, morphological, and functional properties of blood cells. As a result, the oxygen-transport function of red blood cells (RBCs), rheological properties of the blood, and functions of immunocompetent cells as well as the process of apoptosis are primarily affected. Modern pharmacotherapy focuses on the search for new preparations that aim to decrease blood glucose levels. Undesirable side effects and adverse reactions caused by synthetic medicines led to the search and investigation of new preparations of natural origin. Medicinal mushrooms play an important role among such new preparations. They are a source of a large number of high- and low-molecular compounds with pronounced biological effects. Our investigations show pronounced hypoglycemic and anti-anemic action of submerged cultivated mycelium powder of medicinal mushrooms Agaricus brasiliensis (A. brasiliensis) and Ganoderma lucidum (G. lucidum) on streptozotocin-induced DM in rats. Also, we showed that mycelium powders have membrane protective properties as evidenced by the redistribution of RBC populations towards the growth of full functional cell numbers. Normalization of parameters of leukocyte formula and suppression of apoptosis of white blood cells in diabetic rats treated with A

  16. Preparation and characterization of Bi2Sr2CaCu2O8+δ thin films on MgO single crystal substrates by chemical solution deposition

    DEFF Research Database (Denmark)

    Grivel, Jean-Claude; Kepa, Katarzyna; Hlásek, T.

    2013-01-01

    Bi2Sr2CaCu2O8 thin films have been deposited on MgO single crystal substrates by spin-coating a solution based on 2-ethylhexanoate precursors. Pyrolysis takes place between 200°C and 450°C and is accompanied by the release of 2-ethylhexanoic acid, CO2 and H2O vapour. Highly c-axis oriented Bi2Sr2Ca...

  17. More efficient mushroom canning through pinch and exergy analysis

    NARCIS (Netherlands)

    Paudel, Ekaraj; Sman, van der Ruud G.M.; Westerik, Nieke; Awasthi, Ashutosh; Dewi, Belinda P.C.; Boom, Remko M.

    2017-01-01

    Conventional production of canned mushrooms involves multiple processing steps as vacuum hydration, blanching, sterilization, etc. that are intensive in energy and water usage. We analyzed the current mushroom processing technique plus three alternative scenarios via pinch and exergy analysis.

  18. Cultivation experiments on uptake of radionuclides by mushrooms

    International Nuclear Information System (INIS)

    Ban-nai, Tadaaki; Yoshida, Satoshi; Muramatsu, Yasuyuki

    1994-01-01

    After the Chernobyl accident, high concentrations of radiocesium in mushrooms were found in Europe. In our previous studies, we found that 137 Cs concentrations in mushrooms were markedly higher than autotrophic plants. In order to study radionuclide uptake by mushrooms, cultivation experiments in flasks were carried out using radiotracers, 137 Cs, 85 Sr, 60 Co, 54 Mn and 65 Zn. Three mushroom species Hebeloma vinosophyllum, Flammulina velutipes and Coprinus phlyctidosporus were used. In addition, a plant sample, Medicago sativa, was also tested. We found mushrooms tended to accumulate Cs, although there was a large difference between mushroom species. The concentration ratio, which was defined as 'activity of radionuclide in mushroom (Bq/g, wet wt.)' divided by 'activity of radionuclide in medium (Bq/g, wet wt.)', had the highest value of 21 for Cs in H. vinosophyllum. The value was much higher than that in the plant sample. The present findings agreed with previous observations in which Hebeloma species collected in forests contained large amount of 137 Cs. Considerable accumulations were not found for Sr and Co. The concentration ratio of Mn for the mushrooms was about 10, while the ratio of Zn ranged from 15 to 30. The effects of stable elements in the medium on the accumulations were investigated and was found the concentration ratios of Cs, Sr and Co were not influenced highly by coexisting stable elements in the medium. But the concentration ratio of Mn decreased as the amount of coexisting stable elements in the medium was increased. (author)

  19. wild and domesticated mushroom consumption in nigeria abstract

    African Journals Online (AJOL)

    USER

    of awareness, consumption history, wild or ... 15.6% were students and 11.1% business ... 1.1. N/A. 5. 5.6. NA = Not applicable mushrooms for over 10 years; whereas 13.3% ... Consumption history of wild and cultivated mushrooms in Nigeria.

  20. Mushroom refinement endeavor auspicate non green revolution in the offing

    Directory of Open Access Journals (Sweden)

    SHAUKET AHMED PALA

    2014-11-01

    Full Text Available Pala SA, Wani AH, Boda RH, Wani BA. 2014. Mushroom refinement endeavor auspicate non green revolution in the offing. Nusantara Bioscience 6: 173-185. Mushroom can serve as food, tonic, and as medicine thus make people healthier, fitter and happier. They have a cracking potential for generating great socioeconomic impact in human welfare at local, national and international level. With the help of allied mushroom farming we can easily tackle the problem of food for growing world population; reduce environmental pollution by bioconversion of huge organic wastes into mushrooms; recycle huge quantity of organic wastes to mushroom crops, biofertilizers, and biogas; restore damaged environment by mushroom mycelia through mycoforestry, mycoremediation, mycofiltration and mycopesticides in a zero emission fashion. They can be used to degrade radioactive industrial biocide wastes in an eco-friendly fashion. Since mushroom cultivation is an indoor agribusiness, it could have great economic impact by generating employment, income and functional food requirements for rural people especially in developing countries. How far mushroom cultivation can meet the functional food requirements; address the domestic food challenges, rising food prices and crisis vis a vis environmental sustainability will be thrust areas of this communication.

  1. Proximate and mineral analysis of some wild edible mushrooms

    African Journals Online (AJOL)

    israelikk

    2012-04-12

    Apr 12, 2012 ... Key words: Edible mushroom, mineral composition, proximate analysis. ... than beef, pork and chicken that contain similar nutrients. .... legumes and meat. In earlier studies, Gruen and Wong. (1982) indicated that edible mushrooms were highly nutritional and compared favourably with meat, egg and milk.

  2. DRYING CHARACTERISTICS OF CAP AND STEM OF MUSHROOM

    African Journals Online (AJOL)

    Administrator

    mushrooms are not immediately processed. Drying is the most commonly used method of preservation of mushrooms. Dehydrated mush- rooms are used as an important ingredient in several food formulations including instant soups, pasta salads, snack seasonings, stuffing, casseroles, and meat and rice dishes (Tuley,.

  3. analysis of edible mushroom marketing in three villages in central

    African Journals Online (AJOL)

    BARTH

    Furthermore, extension agents should monitor beneficiaries of such loans to ensure ... Mushrooms belong to a group of living things ... environment, knowledge of simple and low cost .... =Taxes (naira) ... Inheritance ... Table 7 revealed that Alesi marketers made profit margin of N 60,000.00 per .... Guide to Edible Mushroom.

  4. Essential trace elements in edible mushrooms by Neutron Activation Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Moura, Patricia L.C.; Maihara, Vera A.; Castro, Lilian P. de [Instituto de Pesquisa e Energetica e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: patricialandim@ig.com.br; vmaihara@ipen.br; lilian.Pavanelli@terra.com.br; Figueira, Rubens C.L. [Universidade Cruzeiro do Sul, Sao Paulo, SP (Brazil)]. E-mail: figueiraru@yahoo.com.br

    2007-07-01

    Mushrooms are excellent nutritional sources since they provide proteins, fibers and mineral, such as K, P, Fe. They have also been the focus of medical research. In Brazil mushrooms are not consumed in large quantities by the general population since people know little about the nutritional and medicinal benefits that mushrooms offer. Hence, this study intends to contribute to a better understanding of the essential element content in edible mushrooms, which are currently commercialized in Sao Paulo state. Br Fe, K, Na and Zn concentrations were determined by Instrumental Neutron Activation Analysis in the following mushroom species: Shitake (Lentinus edodes), Shimeji (Pleurotus ssp), Paris Champignon (Agaricus bisporus), Hiratake ( Pleurotus ssp) and Eringue (Pleurotus Eryngu. The mushroom samples were acquired from commercial establishments in the city of Sao Paulo and directly from the producers. Essential element contents in mushrooms varied between Br 0.03 to 4.1 mg/kg; Fe 20 to 267 mg/kg; K 1.2 to 5.3 g/kg, Na 10 to 582 mg/kg and Zn 60 to 120 mg/kg. The results confirm that mushrooms can be considered a good source of K, Fe and Zn. The low Na level is a good nutritional benefit for the consumer. (author)

  5. Assessing the potential of mushroom cultivation in improving ...

    African Journals Online (AJOL)

    Mo

    Department of Agricultural Extension Education, Faculty of Agriculture, Makerere University, P.O Box ... requires little land space, earns high income, and provides ... mushroom growing is one of the enterprises that would fit .... Children. 2. 3.30. Relative. 3. 5.00. Table 1. Availability of wild mushrooms now and in the past.

  6. Selenium and Zinc content and radical scavenging capacity of edible mushrooms Armilaria mellea and Lycoperdon saccatum

    Directory of Open Access Journals (Sweden)

    Z. Zeković

    2010-01-01

    Full Text Available Armillaria mellea and Lycoperdon saccatum are two delicious mushrooms growing widely trough all Balkan region. Investigation of A. mellea and L. saccatum antioxidant properties includes preparation of mushrooms extracts, determination of Selenium and Zinc content and evaluation of theirs antioxidant activity involving scavenging activity of ˙O2- radicals, DPPH and reducing power assay. Higher extraction yield of 24.48 % has been achieved for L. saccatum, but higher content of Selenium and Zinc was determined in A. mallea extract, 2.359 mg/kg and 50.380 mg/kg, respectively. The radical scavenging activity was found to exhibit 50 % of inhibition value (IC50 value at the extracts concentration of 0.0161±0.0001 mg/ml for the L. saccatum extract and 0.0108±0.0002 mg/ml for A. mallea extract. The determined relative inhibition of ˙O2- radicals for L. sacatum extract is lower than for A. malea. It was determined that both mushrooms extract posses’ reductive capabilities and thus were capable of reducing iron (III.

  7. Accumulation of elements by edible mushroom species: part I. Problem of trace element toxicity in mushrooms.

    Science.gov (United States)

    Mleczek, Mirosław; Siwulski, Marek; Stuper-Szablewska, Kinga; Rissmann, Iwona; Sobieralski, Krzysztof; Goliński, Piotr

    2013-01-01

    The aim of this study was to evaluate Cd, Co, Cu, Hg, Ni, Pb, Sr and Zn accumulation in six edible mushroom species and to assess their risk and benefits to human consumers. Mushrooms (Leccinium aurantiacum, Xerocomus badius, Lactarius deliciosus, Boletus edulis, Cantharellus cibarius and Suillus luteus) were collected from selected regions of Poland during 1990-2010. The highest diversity between studied mushroom species was observed in terms of Cu and Zn accumulation. Significant differences in the accumulation efficiency were found among the six mushroom species examined. The most efficient were Boletus edulis (Cd and Hg), Suillus luteus (Cu and Sr), and Lactarius deliciosus (Pb and Zn). In the case of Co and Ni, the most effective were Xerocomus badius and Leccinium aurantiacum, respectively. The calculated bioconcentration factor (BCF) values of Cd, Cu, Hg, Sr and Zn were > 1 for all species in this study while Co, Ni and Pb usually were bioexcluded (BCF luteus collected in Poland is safe and this finding largely agrees with results from recent studies by other authors.

  8. Purification and Characterization of Melanogenic Enzyme Tyrosinase from Button Mushroom

    Directory of Open Access Journals (Sweden)

    Kamal Uddin Zaidi

    2014-01-01

    Full Text Available Melanogenesis is a biosynthetic pathway for the formation of the pigment melanin in human skin. A key enzyme, tyrosinase, catalyzes the first and only rate-limiting steps in melanogenesis. Since the discovery of its melanogenic properties, tyrosinase has been in prime focus and microbial sources of the enzyme are sought. Agaricus bisporus widely known as the common edible mushroom, it’s taking place in high amounts of proteins, enzyme, carbohydrates, fibers, and low fat contents are frequently cited in the literature in relation to their nutritional value. In the present study tyrosinase from Agaricus bisporus was purified by ammonium sulphate precipitation, dialysis followed by gel filtration chromatography on Sephadex G-100, and ion exchange chromatography on DEAE-Cellulose; the enzyme was purified, 16.36-fold to give 26.6% yield on total activity in the crude extract and final specific activity of 52.19 U/mg. The SDS-PAGE electrophoresis showed a migrating protein band molecular weight of 95 kDa. The purified tyrosinase was optimized and the results revealed that the optimum values are pH 7.0 and temperature 35°C. The highest activity was reported towards its natural substrate, L-DOPA, with an apparent Km value of 0.933 mM. This indicated that tyrosinase purified from Agaricus bisporus is a potential source for medical applications.

  9. Methoxyflavones from New Lingzhi Medicinal Mushroom, Ganoderma lingzhi (Agaricomycetes).

    Science.gov (United States)

    Shimizu, Kuniyoshi; Amen, Yhiya M; Kaifuchi, Satoru

    2016-01-01

    Ganoderma lingzhi is one of the most famous medicinal fungi in the world. It has been used in folk medicine, especially in East Asian countries. It is also a white-rot fungus with strong wood degradation ability, especially against lignin. Different classes of bioactive natural products have been reported in Ganoderma, including triterpenes, polysaccharides, sterols, and peptides. The triterpenes and polysaccharides are the primary bioactive compounds of Ganoderma. We report for the first time the presence of 3 methoxyflavones as minor constituents in G. linghzi. The 3 compounds were identified based on different spectroscopic techniques, including 1- and 2-dimensional nuclear magnetic resonance (1H-1H correlation spectroscopy, heteronuclear single quantum coherence, and heteronuclear multiple bond correlation) and mass spectrometry (high-resolution electrospray ionization mass spectrometry). Our report provides an approach to a possible biosynthetic pathway for biosynthetic genes in the mushrooms. Another great possibility is that these compounds may exist or be formed through degradation of the components in the woody substrate, such as lignin, and then subsequently translocate to the fruiting bodies.

  10. Antioxidant capacity and mineral contents of edible wild Australian mushrooms.

    Science.gov (United States)

    Zeng, X; Suwandi, J; Fuller, J; Doronila, A; Ng, K

    2012-08-01

    Five selected edible wild Australian mushrooms, Morchella elata, Suillus luteus, Pleurotus eryngii, Cyttaria gunnii, and Flammulina velutipes, were evaluated for their antioxidant capacity and mineral contents. The antioxidant capacities of the methanolic extracts of the dried caps of the mushrooms were determined using a number of different chemical reactions in evaluating multi-mechanistic antioxidant activities. These included the Trolox equivalent antioxidant capacity, ferric ion reducing antioxidant power, and ferrous ion chelating activity. Mineral contents of the dried caps of the mushrooms were also determined by inductively coupled plasma-optical emission spectroscopy. The results indicated that these edible wild mushrooms have a high antioxidant capacity and all, except C. gunnii, have a high level of several essential micro-nutrients such as copper, magnesium, and zinc. It can be concluded that these edible wild mushrooms are good sources of nutritional antioxidants and a number of mineral elements.

  11. 77 FR 66580 - Certain Preserved Mushrooms From India: Preliminary Results of Antidumping Duty Administrative...

    Science.gov (United States)

    2012-11-06

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-533-813] Certain Preserved Mushrooms... preserved mushrooms (mushrooms) from India. The period of review (POR) is February 1, 2011, through January... Preliminary Results of Antidumping Duty Administrative Review: Certain Preserved Mushrooms from India...

  12. 77 FR 19620 - Certain Preserved Mushrooms from the People's Republic of China: Initiation of Antidumping Duty...

    Science.gov (United States)

    2012-04-02

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-570-851] Certain Preserved Mushrooms... certain preserved mushrooms from the People's Republic of China (PRC). In accordance with section 751(a)(2... mushrooms from the PRC.\\1\\ The antidumping duty order on certain preserved mushrooms from the PRC therefore...

  13. Preparation and magnetic properties of magnetic photonic crystal by using monodisperse polystyrene covered Fe3O4 nanoparticles onto glass substrate

    Science.gov (United States)

    Azizi, Zahra Sadat; Tehranchi, Mohammad Mehdi; Vakili, Seyed Hamed; Pourmahdian, Saeed

    2018-05-01

    Engineering approach towards combined photonic band gap properties and magnetic/polymer composite particles, attract considerable attention of researchers due to their unique properties. In this research, two different magnetic particles were prepared by nearly monodisperse polystyrene spheres as bead with two concentrations of Fe3O4 nanoparticles to prepare magnetic photonic crystals (MPCs). The crystal surfaces and particles morphology were investigated employing scanning electron microscopy and transmission electron microscopy. The volume fraction of magnetic material embedded into colloidal spheres and their morphology was found to be a key parameter in the optical and magneto-optical properties of transparent MPC.

  14. Influence of growing conditions on heavy metals content in cultivated mushrooms

    International Nuclear Information System (INIS)

    Kmitene, L.

    1997-01-01

    The aim of the research was to investigate the influence of growing terms, microclimate conditions and growing medium on the mushroom harvest and quality. Champignons were grown according to the Polish technology. Pleurotus ostreatus was grown in perforate sacks using chopped wheat straw. Mycelium was sowed in different terms. It was established that the harvest of mushrooms, especially their quality, depends not only on growing conditions, but also on the kind of mushrooms, composte quality, mushroom size (diameter of cap), picking of mushrooms, storage time and other conditions. The technology of mushroom growing will be developed after studying all the factors determining the content of heavy metals and radiation in mushrooms

  15. Content and Bioaccumulation of Nine Mineral Elements in Ten Mushroom Species of the Genus Boletus

    Directory of Open Access Journals (Sweden)

    Xue-Mei Wang

    2015-01-01

    Full Text Available Concentrations and bioconcentration potential of nine elements (Ca, Cu, Fe, K, Mg, Mn, Na, P, and Zn in ten species of wild edible Boletus and the corresponding underlying soils were analyzed. The analyses were performed using inductively coupled plasma atomic emission spectrophotometer. Boletus showed relative abundant contents of P, K, Fe, Mg, Ca, and Na and less of Zn, Cu, and Mn. Caps compared to stalks were enriched in P, K, Cu, Mg, and Zn, while stalks were enriched in Mn. The elements such as P and K were accumulated (BCF>1, while Ca, Fe, Mg, Mn, and Na were excluded (BCF<1 in the fruiting bodies. The correlation analysis indicated high correlations between Cu, Mn, Ca, and Fe in the mushrooms as compared to the corresponding soils. Significant correlations were also obtained between Cu-P (r=0.775, Fe-P (r=0.728, and Zn-P (r=0.76 for caps and Cu-Mg (r=0.721, Fe-Mg (r=0.719, Zn-Mg (r=0.824, and Zn-P (r=0.818 for stalks. The results of this study imply that ability of fungi to accumulate elements from substrate could be influenced by mushroom species and underlying soil substrates.

  16. Content and Bioaccumulation of Nine Mineral Elements in Ten Mushroom Species of the Genus Boletus.

    Science.gov (United States)

    Wang, Xue-Mei; Zhang, Ji; Li, Tao; Wang, Yuan-Zhong; Liu, Hong-Gao

    2015-01-01

    Concentrations and bioconcentration potential of nine elements (Ca, Cu, Fe, K, Mg, Mn, Na, P, and Zn) in ten species of wild edible Boletus and the corresponding underlying soils were analyzed. The analyses were performed using inductively coupled plasma atomic emission spectrophotometer. Boletus showed relative abundant contents of P, K, Fe, Mg, Ca, and Na and less of Zn, Cu, and Mn. Caps compared to stalks were enriched in P, K, Cu, Mg, and Zn, while stalks were enriched in Mn. The elements such as P and K were accumulated (BCF > 1), while Ca, Fe, Mg, Mn, and Na were excluded (BCF < 1) in the fruiting bodies. The correlation analysis indicated high correlations between Cu, Mn, Ca, and Fe in the mushrooms as compared to the corresponding soils. Significant correlations were also obtained between Cu-P (r = 0.775), Fe-P (r = 0.728), and Zn-P (r = 0.76) for caps and Cu-Mg (r = 0.721), Fe-Mg (r = 0.719), Zn-Mg (r = 0.824), and Zn-P (r = 0.818) for stalks. The results of this study imply that ability of fungi to accumulate elements from substrate could be influenced by mushroom species and underlying soil substrates.

  17. Macro and trace elements in edible mushrooms, Shiitake, Shimeji and Cardoncello from Petrópolis, Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Jaylei Monteiro Gonçalves

    2014-05-01

    Full Text Available The concentrations of twenty-five elements (Al, As, Ba, Bi, Ca, Cd, Cr, Cu, Fe, Ga, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Rb , Sb, Se, Sn, Sr, V and Zn were determined in three edible mushrooms, Shiitake (Lentinula edodes, Black Shimeji (Pleurotus ostreatusi and Cardoncello (Pleurotus eryngyii from Petrópolis, Rio de Janeiro, Brazil. Samples were collected along the year 2010 and their preparations were made after drying, milling, an acid pre-digestion and a decomposition procedure in a muffle furnace. The analytical techniques employed for the elements determination were Mass Spectrometry with Inductively Coupled Plasma and Flame Atomic Absorption Spectrometry. Two certified reference materials, Apple Leaves and Mussel Tissue, were used for the evaluation of the analytical procedure and recovery values around 98% were obtained. The results showed that the analyzed mushrooms have high levels of Cu, Fe, K, Mg, Mn and Zn containing more than 30% the recommended daily intake for these nutrients according to Brazilian legislation. These mushrooms presented a very low ratio Na/K. Regarding the levels of some contaminants, the mushrooms had concentrations of Cd, Pb and As below the recommended maximum limits allowed by Brazilian legislation.

  18. Proficiency test Plant 6 - determination of As, Cd, Cu, Hg, Pb, Se and Zn in dry mushroom powder (Suillus bovinus)

    International Nuclear Information System (INIS)

    Polkowska-Motrenko, H.; Dudek, J.; Chajduk, E.; Sypula, M.; Sadowska-Bratek, M.

    2006-01-01

    Proficiency testing scheme PLANT 6: Determination of As, Cd, Cu, Hg, Pb, Se and Zn in dry mushroom powder (Suillus bovinus) has been described. The proficiency test has been provided by the Institute of Nuclear Chemistry and Technology (Warsaw) with cooperation with POLLAB-CHEM/EURACHEM-PL and REFMAT Society. Wild mushrooms were collected in the forest in north-west Poland, cleaned, i.e. dust, soil and attached mosses were removed. Mushrooms were cut into smaller parts and air dried in a dryer. Dried mushrooms were milled in a centrifugal mill and sieved. Particles of fraction below 1 mm diameter were collected. Analytical samples of 20 g mass were prepared. The material were then characterized by homogeneity testing and determination of assigned values for concentration of elements in question. The testing samples were sent to the laboratories participating in the proficiency test. The results supplied by the participants were statistically evaluated and the calculated values of z-score and En numbers were used for the evaluation of the participating laboratory competency. (author)

  19. Soil organic matter and nitrogen cycling in response to harvesting, mechanical site preparation, and fertilization in a wetland with a mineral substrate

    Science.gov (United States)

    James W. McLaughlin; Margaret R. Gale; Martin F. Jurgensen; Carl C. Trettin

    2000-01-01

    Forested wetlands are becoming an important timber resource in the Upper Great Lakes Region of the US. However, there is limited information on soil nutrient cycling responses to harvesting and post-harvest manipulations (site preparation and fertilization). The objective of this study was to examine cellulose decomposition, nitrogen mineralization, and soil solution...

  20. Mushrooms pollution by radioactivity and heavy metals

    International Nuclear Information System (INIS)

    Delatouche, L.

    2001-01-01

    Some basic notions of radioactivity are recalled first (definition, origin, measurement units, long- and short-term effects..). Then, the pedology of soils and the properties and toxicity of 3 heavy metals (lead, cadmium, mercury) are presented to better understand the influence of some factors (genre, age, ecological type, pollution, conservation..) on the contamination of macro-mycetes by radioactivity and heavy metals. The role of chemists is to inform the consumers about these chemical and radioactive pollutions and to give some advices about the picking up (quantities, species and places to avoid) and the cooking of mushrooms. (J.S.)

  1. Preparation of high magneto-optical performance and crystalline quality Ce{sub 1}Gd{sub 2}Fe{sub 5−x}Ga{sub x}O{sub 12} films on CLNGG substrate crystal

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Qiu-ping; Zheng, Ze-yuan; Lin, Nan-xi; Liu, Xiao-feng; Hong, Can-huang; Hu, Xiao-lin, E-mail: linamethyst@fzu.edu.cn; Zhuang, Nai-feng; Chen, Jian-zhong, E-mail: j.z.chen@fzu.edu.cn

    2016-11-01

    Thin films of Ce{sub 1}Gd{sub 2}Fe{sub 5−x}Ga{sub x}O{sub 12} (Ce,Ga:GIG) were prepared on Gd{sub 3}Ga{sub 5}O{sub 12} (GGG) and Ca{sub 2.90}Li{sub 0.30}Nb{sub 1.93}Ga{sub 2.76}O{sub 12} (CLNGG) substrates by using radio frequency magnetron sputtering technique. The phase, grain orientation, surface morphology, transmittance, magnetism and magnetic circular dichroism (MCD) properties of films were analyzed. And the effects of lattice mismatch and non-magnetic Ga{sup 3+}-doping were discussed. The results show that the films with higher crystallized quality and lower stress can be obtained by growing on CLNGG than on GGG. Moreover, the coercive force, magnetization, magneto-optical effect intensity and orientation of film can be effectively regulated by adjusting Ga{sup 3+}-doped concentration. - Highlights: • With excellent magneto-optical performance, Ce,Ga:GIG film has a good application prospect. • Ce,Ga:GIG film with high quality were prepared on CLNGG by RF magnetron sputtering. • Crystalline quality and morphology of films are intently related to the substrate. • Ga{sup 3+} doping obviously affect on magnetism and magneto-optical property of Ce:GIG film.

  2. Effect of Edible Mushroom (Pleurotus ostreatus on Type-2 Diabetics

    Directory of Open Access Journals (Sweden)

    M. Abu Sayeed

    2014-01-01

    Full Text Available The prevalence of non-communicable diseases (NCD like diabetes, hypertension, dyslipidemia and atherosclerotic cardiovascular diseases (CVD are on the increase globally and predominantly in the South East Asian Region (SEAR. The increasing NCD and its complications burdened the health cost of Bangladesh. The available literatures suggest that edible mushrooms are effective in controlling metabolic risks like hyperglycemia and hypercholesterolemia. The study addressed the metabolic effects of edible oyster mushroom (Pleurotus ostreatus in diabetic individuals and to assess the undesirable effects of mushroom. A total of 5000 newly registered diabetic women were screened for eligible participants (urban housewives, age 30 – 50y, BMI 22 – 27, FBG 8 – 12 mmol/l; free from complications or systemic illnesses and agreed to adhere to the study for 360 days. The investigations included weight and height for BMI, waist- and hip-girth for WHR, BP, FBG, 2ABF, T-chol, TG, HDL, LDL, ALT and Creatinine starting from the day 0 (baseline and each subsequent follow-up days: 60, 120, 180, 240, 300 and 360 for comparison between placebo and mushroom groups and also within group (baseline vs. follow up days, individually for placebo and mushroom. The daily intake of mushroom was 200g for the mushroom group and an equivalent calorie of vegetables for the placebo group. Overall, 73 diabetic housewives (mushroom / placebo = 43 /30 volunteered. The mean (with SEM values of BMI, WHR, BP, FBG, 2ABF, T-chol, TG, HDL, LDL, ALT and Creatinine of the placebo group were compared with the mushroom group. Compared with the placebo, the mushroom group showed significant reductions of FBG (p<0.001, 2ABF (p<0.001, T-chol (p<0.001, TG (p=0.03 and LDL (p<0.001; whereas, no difference was observed for BMI, SBP, DBP, HDL, Hb, creatinine and ALT. The comparison within groups (baseline vs. follow-up there were significant reduction of these variables in mushroom but not in the

  3. Ethnomedicinal uses, pharmacological activities, and cultivation of Lignosus spp. (tiger׳s milk mushrooms) in Malaysia - A review.

    Science.gov (United States)

    Lau, Beng Fye; Abdullah, Noorlidah; Aminudin, Norhaniza; Lee, Hong Boon; Tan, Pei Jean

    2015-07-01

    activities of L. rhinocerotis sclerotial extracts have been explored. The nature of sclerotial bioactive components, such as proteins, polysaccharides, and/or polysaccharide-protein complexes, has been identified, whereas the low-molecular-weight constituents remain poorly studied. The artificial cultivation of L. rhinocerotis via solid substrate and liquid fermentations successfully yielded fruiting bodies, sclerotium, mycelium, and culture broth that could be exploited as substitutes for the wild resources. The cultivated sclerotium and mycelium were shown to be safe from a toxicological point of view. Other research areas, e.g., chemical studies, genomics, and proteomics, have been employed to gain insights into the medicinal properties of TMM. This review clarified the medicinal properties of TMM as recorded in various ethnomycological records, and it simultaneously highlighted the current efforts to provide scientific evidence by using various in vitro and in vivo models. Thus far, only the anti-tumor and immuno-modulatory effects of L. rhinocerotis sclerotial aqueous extracts have been extensively investigated, and other medicinal properties relevant to their traditional uses, e.g., anti-tussive and anti-pyretic properties, have yet to be validated. Further studies focusing on (i) the isolation and characterization of active components, (ii) the elucidation of their modes of action, and (iii) an evaluation of their safety and efficacy, when compared with the crude aqueous preparations, are warranted to accelerate potential drug discovery from TMM. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  4. Offshore Substrate

    Data.gov (United States)

    California Natural Resource Agency — This shapefile displays the distribution of substrate types from Pt. Arena to Pt. Sal in central/northern California. Originally this data consisted of seven paper...

  5. Investigation of nano-structured Zirconium oxide film on Ti6Al4V substrate to improve tribological properties prepared by PIII&D

    Energy Technology Data Exchange (ETDEWEB)

    Saleem, Sehrish [Department of Physics, Government College University, Lahore 54000 (Pakistan); Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon (Hong Kong); Ahmad, R., E-mail: ahriaz@gcu.edu.pk [Department of Physics, Government College University, Lahore 54000 (Pakistan); Centre for Advanced Studies in Physics (CASP), Government College University, Lahore 54000 (Pakistan); Ayub, R. [Centre for Advanced Studies in Physics (CASP), Government College University, Lahore 54000 (Pakistan); Ikhlaq, Uzma [Department of Physics, Government College University, Lahore 54000 (Pakistan); Jin, Weihong; Chu, Paul K. [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon (Hong Kong)

    2017-02-01

    Highlights: • ZrO{sub 2} film was deposited on Ti6Al4V alloy using the plasma immersion ion implantation and deposition at various bias voltage. • The deposited film was characterized by XPS, AFM, Ellipometry, Nano-indentation and Pin-on disk machine. • A dense zirconium oxide film with the maximum thickness 108 nm was formed at maximum applied voltage. • The hardness and wear resistance of film is much higher as compared to the substrate. - Abstract: Plasma immersion ion implantation and deposition (PIII&D) is the most attractive and efficient technique used in the medical field to tailor materials for biomedical applications. In the present study zirconium oxide nano-structured thin films were deposited on surface of Ti6Al4V alloy for bias voltages of 15, 20 and 25 kV. The chemical composition, surface roughness and thickness of deposited films were characterized by the x-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and ellipsometry respectively. The XPS results confirm the formation of a dense zirconium oxide film of the treated specimens. AFM results exhibit a smooth film with maximum roughness of about 8.4 nm is formed. The thickness of the film is increased with the increase in bias voltages and is maximum at 25 kV. The effect of bias voltages on wear characteristics was further investigated by pin-on-disk test. It is observed that the friction coefficient is reduced, whereas wear resistance is enhanced and it is found to be maximum at 25 kV compared to the other bias voltages. Nanohardness is improved up to twice compared to untreated specimen at the maximum bias voltage. Therefore, it is concluded that deposition of zirconium oxide using the PIII&D is produced a dense layer on the substrate surface, which can be used as a promising candidate for the improved tribological properties of Ti6Al4V.

  6. Effects of Substrate and Post-Growth Treatments on the Microstructure and Properties of ZnO Thin Films Prepared by Atomic Layer Deposition

    Science.gov (United States)

    Haseman, Micah; Saadatkia, P.; Winarski, D. J.; Selim, F. A.; Leedy, K. D.; Tetlak, S.; Look, D. C.; Anwand, W.; Wagner, A.

    2016-12-01

    Aluminum-doped zinc oxide (ZnO:Al) thin films were synthesized by atomic layer deposition on silicon, quartz and sapphire substrates and characterized by x-ray diffraction (XRD), high-resolution scanning electron microscopy, optical spectroscopy, conductivity mapping, Hall effect measurements and positron annihilation spectroscopy. XRD showed that the as-grown films are of single-phase ZnO wurtzite structure and do not contain any secondary or impurity phases. The type of substrate was found to affect the orientation and degree of crystallinity of the films but had no effect on the defect structure or the transport properties of the films. High conductivity of 10-3 Ω cm, electron mobility of 20 cm2/Vs and carrier density of 1020 cm-3 were measured in most films. Thermal treatments in various atmospheres induced a large effect on the thickness, structure and electrical properties of the films. Annealing in a Zn and nitrogen environment at 400°C for 1 h led to a 16% increase in the thickness of the film; this indicates that Zn extracts oxygen atoms from the matrix and forms new layers of ZnO. On the other hand, annealing in a hydrogen atmosphere led to the emergence of an Al2O3 peak in the XRD pattern, which implies that hydrogen and Al atoms compete to occupy Zn sites in the ZnO lattice. Only ambient air annealing had an effect on film defect density and electrical properties, generating reductions in conductivity and electron mobility. Depth-resolved measurements of positron annihilation spectroscopy revealed short positron diffusion lengths and high concentrations of defects in all as-grown films. However, these defects did not diminish the electrical conductivity in the films.

  7. Comparison of Different Drying Methods for Recovery of Mushroom DNA.

    Science.gov (United States)

    Wang, Shouxian; Liu, Yu; Xu, Jianping

    2017-06-07

    Several methods have been reported for drying mushroom specimens for population genetic, taxonomic, and phylogenetic studies. However, most methods have not been directly compared for their effectiveness in preserving mushroom DNA. In this study, we compared silica gel drying at ambient temperature and oven drying at seven different temperatures. Two mushroom species representing two types of fruiting bodies were examined: the fleshy button mushroom Agaricus bisporus and the leathery shelf fungus Trametes versicolor. For each species dried with the eight methods, we assessed the mushroom water loss rate, the quality and quantity of extracted DNA, and the effectiveness of using the extracted DNA as a template for PCR amplification of two DNA fragments (ITS and a single copy gene). Dried specimens from all tested methods yielded sufficient DNA for PCR amplification of the two genes in both species. However, differences among the methods for the two species were found in: (i) the time required by different drying methods for the fresh mushroom tissue to reach a stable weight; and (ii) the relative quality and quantity of the extracted genomic DNA. Among these methods, oven drying at 70 °C for 3-4 h seemed the most efficient for preserving field mushroom samples for subsequent molecular work.

  8. Radiopasteurization of sawdust media used in propagation of mushrooms

    International Nuclear Information System (INIS)

    Ito, Hitoshi; Sato, Tomotaro

    1975-01-01

    In our country, cultivation of mushrooms such as Pleurotus ostreatus, Kuehneromyces nameko, and Lentinus edodes (Cortinellus shiitake) are expanding, and has reached considerable amounts. These mushrooms are cultivated generally on decaying logs of broad leaf trees. Recently, these mushrooms are also cultivated artificially on the sawdust-media containing rice bran and other nutrient in the room of which temperature is controlled. However, these artificial culture media must be germicidated for 2 or 6 hours at 100 to 120 0 C before inoculation of mushroom spawn. In this study, attempts were made to cultivate Pleurotus ostreatus on the sawdust-media pasteurized by ionizing radiation. Inhibition of mushrooms growth were caused mainly by multiplication of Citrobacter and Fusarium, and these organisms were eliminated by a dose of 0.5 Mrad gamma irradiation. A surprising result was that many of sawdust media subjected to 0.5, 1.0 and 2.0 Mrad increased mycelial growth rates more than heat treatments, and also mushroom yields were enhanced. The multiplication of remaining microorganisms such as Bacillus and yeasts after irradiation with a dose of 0.5 Mrad or 1.0 Mrad did not inhibit the mycelial growth of mushrooms. (auth.)

  9. Radiocaesium and natural gamma emitters in mushrooms collected in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Baeza, Antonio; Guillen, Fco. Javier [Department of Physics, Faculty of Veterinary, University of Extremadura, Avda de la Universidad s/n, Caceres 10071 (Spain); Hernandez, Santiago [Department of Techniques, Means and Elements of Construction, Polytechnical School, University de Extremadura, Avda de la Universidad s/n, Caceres 10071 (Spain); Moreno, Gabriel; Manjon, Jose Luis [Department of Plant Biology, Faculty of Sciences, University of Alcala, Alcala de Henares, Madrid 28871 (Spain); Pascual, Rosario [Department of Zootechnics, Faculty of Veterinary, University of Extremadura, Avda de la Universidad s/n, Caceres 10071 (Spain)

    2004-01-05

    Mushrooms can accumulate heavy metals in general, including radionuclides found in the nature. However, little attention has been paid to the radioactive content of mushrooms collected in Spain and the dose for the population due to their ingestion. To address this, we analysed the contents of {sup 137}Cs, {sup 40}K, {sup 226}Ra and {sup 7}Be present in different species of mushrooms, according to their genus and nutritional mechanism. We observed that mycorrhizal mushrooms accumulate {sup 137}Cs more than saprophytes, and vice versa for {sup 7}Be. {sup 40}K and {sup 226}Ra are accumulated to the same degree by the two groups of mushrooms. We estimated the dose due to ingestion of mushrooms in Spain to be 2 {mu}Sv/year, and the contribution of {sup 40}K and {sup 226}Ra to be generally greater than that of {sup 137}Cs. The contribution of {sup 137}Cs to the dose was calculated by taking into account the results of an experiment carried out under the controlled laboratory conditions, which showed that approximately 98% of {sup 134}Cs was associated with the readily digestible fraction of the mushrooms.

  10. Dietary fibers from mushroom sclerotia. 4. In vivo mineral absorption using ovariectomized rat model.

    Science.gov (United States)

    Wong, Ka-Hing; Katsumata, Shin-Ichi; Masuyama, Ritsuko; Uehara, Mariko; Suzuki, Kazuharu; Cheung, Peter C K

    2006-03-08

    The effect of three novel dietary fibers (DFs) prepared from mushroom sclerotia, namely, Pleurotus tuber-regium, Polyporus rhinocerus, and Wolfiporia cocos, on calcium and magnesium absorption was evaluated in ovariectomized (OVX) rats fed with sclerotial DF based and low Ca (0.3%) diets for 14 days. The animals in the W. cocos DF diet group possessed significantly (p cocos DF group were also significantly (p cocos DF could improve the overall Ca and Mg absorptions of the OVX rats fed a low Ca diet. The potential use of sclerotial DFs as a functional food ingredient for enhancing mineral absorption is also discussed.

  11. Amanitin and phallotoxin concentration in Amanita phalloides var. alba mushroom.

    Science.gov (United States)

    Kaya, Ertugrul; Yilmaz, Ismail; Sinirlioglu, Zeynep Aydin; Karahan, Selim; Bayram, Recep; Yaykasli, Kursat Oguz; Colakoglu, Serdar; Saritas, Ayhan; Severoglu, Zeki

    2013-12-15

    Although rarely seen, Amanita phalloides var. alba, a variety of A. phalloides type mushrooms, causes mushroom poisoning resulting in death. Since it is frequently confused with some edible mushrooms due to its white colored cap and macroscopic appearance, it becomes important in toxicological terms. Knowledge of the toxin amount contained in this mushroom type is invaluable in the treatment of cases involving poisoning. In this study, we examined the toxin levels of various parts of the A. phalloides var. alba mushroom growing Duzce region of Turkey. Toxin analyses were carried out for A. phalloides var. alba, which were collected from the forests Duzce region of Turkey in 2011, as a whole and also separately in its spore, pileus, gills, stipe and volva parts. The alpha amanitin, beta amanitin, gamma amanitin, phalloidin and phallacidine analyses of the mushrooms were carried out using the RP-HPLC method. A genetic analysis of the mushroom showed that it had similar genetic characteristics as A. phalloides and was a variety of it. The lowest toxins quantity was detected in spores, volva and stipe among all parts of the mushroom. The maximum amount of amatoxins was measured in the gills. The pileus also contained a high amount of amatoxins. Generally, amatoxins and phallotoxin concentrations were lower as compared to A. phalloides, but interestingly all toxins other than gamma toxin were higher in the spores of A. phalloides var. alba. The amount of toxin in all of its parts had sufficient concentrations to cause death. With this study, the amatoxin and phallotoxin concentrations in A. phalloides var. alba mushroom and in its parts have been revealed in detail for the first time. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Linhchi mushrooms as biological monitors for 137Cs pollution

    International Nuclear Information System (INIS)

    Tran Van, L.; Le Duy, T.

    1991-01-01

    Radioactivity of Linhchi mushrooms (Ganoderma Lucidum) cultivated in laboratory and production conditions has been measured in the Environmental Laboratory of Nuclear Research Institute (NRI), Dalat, Vietnam. The results showed that Linhchi mushroom has a high radioactive concentration of 137 Cs, which is about 20 Bq kg -1 fresh weight. In addition, the radioactive contents of substrata before and after cultivation were insignificant. This suggested that Linhchi mushroom should only accumulate the 137 Cs radioisotope from the atmosphere, directly. Therefore, it should be considered as a bio-indicator for environmental monitoring. (author) 13 refs.; 3 figs.; 2 tabs

  13. An examination of antibacterial and antifungal properties of constituents of Shiitake (Lentinula edodes) and oyster (Pleurotus ostreatus) mushrooms.

    Science.gov (United States)

    Hearst, Rachel; Nelson, David; McCollum, Graham; Millar, B Cherie; Maeda, Yasunori; Goldsmith, Colin E; Rooney, Paul J; Loughrey, Anne; Rao, J R; Moore, John E

    2009-02-01

    Antibiotic agents have been in widespread and largely effective therapeutic use since their discovery in the 20th century. However, the emergence of multi-drug resistant pathogens now presents an increasing global challenge to both human and veterinary medicine. It is now widely acknowledged that there is a need to develop novel antimicrobial agents to minimize the threat of further antimicrobial resistance. With this in mind, a study was undertaken to examine the antimicrobial properties of aqueous extracts of 'exotic' Shiitake and Oyster mushrooms on a range of environmental and clinically important microorganisms. Several batches of Shiitake and oyster mushrooms were purchased fresh from a local supermarket and underwent aqueous extraction of potential antimicrobial components. After reconstitution, aqueous extracts were tested qualitatively against a panel of 29 bacterial and 10 fungal pathogens, for the demonstration of microbial inhibition. Our data quantitatively showed that Shiitake mushroom extract had extensive antimicrobial activity against 85% of the organisms it was tested on, including 50% of the yeast and mould species in the trial. This compared favourably with the results from both the Positive control (Ciprofloxacin) and Oyster mushroom, in terms of the number of species inhibited by the activity of the metabolite(s) inherent to the Shiitake mushroom. This small scale study shows the potential antimicrobial effects of Shitake extracts, however further work to isolate and identify the active compound(s) now requires to be undertaken. Once these have been identified, suitable pharmaceutical delivery systems should be explored to allow concentrated extracts to be prepared and delivered optimally, rather than crude ingestion of raw material, which could promote further bacterial resistance.

  14. The target preparation of "2"3"2Th plated on the nickel with copper as substrate and "2"3"0Pa generation

    International Nuclear Information System (INIS)

    Shen Hua; Geng Junxia; Gao Size; Zhang Guoxin; Zhang Lan; Li Wenxin; Li Qingnuan; Wu Guozhong

    2014-01-01

    The electrochemical parameters on nickel plating on the copper have been studied using aqueous electroplating technique. And thorium is plated on the nickel flake using molecular plating technique. The better experimental parameters are obtained. According to these optimized parameters, the "2"3"2Th target which is suitable for Cyclone-30 accelerator is prepared. The proton beam with energy of 21 MeV bombed the "2"3"2Th target (total beam time 20 μAh). The results showed that the better range of plating current density of nickel plated on copper is l.30∼1.68 A/dm"2. The thickness of nickel plating layer can reach more than 10 μm. The current density is 3∼5 mA/cm"2, and the thickness of plated thorium layer is up to micrometer scale. The binding force of as-prepared "2"3"2Th target is very well. There is "2"3"0Pa appeared after the target is bombed by the proton beam. (authors)

  15. Facile preparation of dendritic Ag-Pd bimetallic nanostructures on the surface of Cu foil for application as a SERS-substrate

    Energy Technology Data Exchange (ETDEWEB)

    Yi Zao [College of Physics and Electronics, Central South University, Changsha 410083 (China); Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang 621900 (China); Tan Xiulan; Niu Gao [Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang 621900 (China); Xu Xibin [College of Physics and Electronics, Central South University, Changsha 410083 (China); Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang 621900 (China); Li Xibo; Ye Xin; Luo Jiangshan; Luo Binchi; Wu Weidong; Tang Yongjian [Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang 621900 (China); Yi Yougen, E-mail: yougenyi@mail.csu.edu.cn [College of Physics and Electronics, Central South University, Changsha 410083 (China)

    2012-05-01

    Dendritic Ag-Pd bimetallic nanostructures have been synthesized on the surface of Cu foil via a multi-stage galvanic replacement reaction (MGRR) of Ag dendrites in a Na{sub 2}PdCl{sub 4} solution. After five stages of replacement reaction, one obtained structures with protruding Ag-Pd flakes; these will mature into many porous structures with a few Ag atoms that are left over dendrites. The dendritic Ag-Pd bimetallic nanostructures were characterized by transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX), selected area electron diffraction (SAED) and X-ray photoelectron spectroscopy (XPS). The morphology of the products strongly depended on the stage of galvanic replacement reaction and reaction temperature. The morphology and composition-dependent surface-enhanced Raman scattering (SERS) of the as-synthesized Ag-Pd bimetallic nanostructures were investigated. The effectiveness of these dendritic Ag-Pd bimetallic nanostructures on the surface of Cu foil as substrates toward SERS detection was evaluated by using rhodamine 6G (R6G) as a probe molecule. The results indicate that as-synthesized dendritic Ag-Pd bimetallic nanostructures are good candidates for SERS spectroscopy.

  16. Flexible Transparent Electrode of Hybrid Ag-Nanowire/Reduced-Graphene-Oxide Thin Film on PET Substrate Prepared Using H2/Ar Low-Damage Plasma

    Directory of Open Access Journals (Sweden)

    Chi-Hsien Huang

    2017-01-01

    Full Text Available We employ H2/Ar low-damage plasma treatment (H2/Ar-LDPT to reduce graphene oxide (GO coating on a polymer substrate—polyethylene terephthalate (PET—with the assistance of atomic hydrogen (Hα at low temperature of 70 °C. Four-point probing and ultraviolet-visible (UV-Vis spectroscopy demonstrate that the conductivity and transmittance can be controlled by varying the H2/Ar flow rate, treatment time, and radio-frequency (RF power. Optical emission spectroscopy reveals that the Hα intensity depends on these processing parameters, which influence the removal of oxidative functional groups (confirmed via X-ray photoelectron spectroscopy to yield reduced GO (rGO. To further improve the conductivity while maintaining high transmittance, we introduce silver nanowires (AgNWs between rGO and a PET substrate to obtain a hybrid rGO/AgNWs/PET with a sheet resistance of ~100 Ω/sq and 81% transmittance. In addition, the hybrid rGO/AgNWs thin film also shows high flexibility and durability and is suitable for flexible and wearable electronics applications.

  17. Preparation of 24 ternary thin film materials libraries on a single substrate in one experiment for irreversible high-throughput studies.

    Science.gov (United States)

    Buenconsejo, Pio John S; Siegel, Alexander; Savan, Alan; Thienhaus, Sigurd; Ludwig, Alfred

    2012-01-09

    For different areas of combinatorial materials science, it is desirable to have multiple materials libraries: especially for irreversible high-throughput studies, like, for example, corrosion resistance testing in different media or annealing of complete materials libraries at different temperatures. Therefore a new combinatorial sputter-deposition process was developed which yields 24 materials libraries in one experiment on a single substrate. It is discussed with the example of 24 Ti-Ni-Ag materials libraries. They are divided based on the composition coverage and orientation of composition gradient into two sets of 12 nearly identical materials libraries. Each materials library covers at least 30-40% of the complete ternary composition range. An acid etch test in buffered-HF solution was performed, illustrating the feasibility of our approach for destructive materials characterization. The results revealed that within the composition range of Ni < 30 at.%, the films were severely etched. The composition range which shows reversible martensitic transformations was confirmed to be outside this region. The high output of the present method makes it attractive for combinatorial studies requiring multiple materials libraries.

  18. Radiocesium concentrations in wild mushrooms and characteristics of cesium accumulation by the edible mushroom (Pleurotus ostreatus)

    International Nuclear Information System (INIS)

    Sugiyama, Hideo; Terada, Hiroshi; Shibata, Hisashi; Morita, Yohoji; Kato, Fumio

    2000-01-01

    Mushrooms collected from a sub-alpine forest of Mt. Fuji and some other locations in Japan in 1996 were analyzed for radiocesium. The 137 Cs concentrations in 37 mushrooms varied widely from 1.6 to 783 Bqkg -1 fresh wt. The characteristics of Cs accumulation were analyzed by culturing fruiting bodies of the edible mushroom Pleurotus ostreatus (Fr.) Kummer Y-1 (P. ostreatus Y-1). The 137 Cs and stable Cs accumulation expressed as the concentration ratio (CR, 137 Cs or Cs concentration in the dried fruiting body/ 137 Cs or Cs concentration in the fresh medium) were in good agreement, indicating similar migration. The CR of Cs grown on medium containing both 0.1% Cs and 0.1% K, 10.2, showed a decrease of about 30 percent as compared with that containing 0.1% Cs only. These CR values suggested that Cs accumulation by the fruiting bodies of P. ostreatus Y-1 is affected by the presence of K similarly to previous observations in the mycelia. The 133 Cs-NMR spectra from the fruiting bodies of P. ostreatus Y-1 showed two resonance signals, whereas those from the media after harvesting of fruiting bodies showed only one signal. Just before growth of the fruiting bodies, bunches consisting of many mycelia were observed by scanning electron microscopy (SEM). No significant differences in the elemental distribution (Cs, K, P and C) were detected in the mycelium surface by SEM equipped with an energy dispersive X-ray microanalyzer. (author)

  19. DNA Modified with Metal Nanoparticles: Preparation and Characterization of Ordered Metal-DNA Nanostructures in a Solution and on a Substrate

    Directory of Open Access Journals (Sweden)

    Nina Kasyanenko

    2016-01-01

    Full Text Available DNA interaction with silver and aluminum nanoparticles in a solution has been investigated with the AFM, SEM, dynamic light scattering, viscometry, and spectral methods. The comparison of DNA interaction with nanoparticles synthesized by the reduction of Ag+ ions and with nanoparticles obtained by the electric discharge plasma method was done. DNA metallization in a solution and on n-silicon surface with metal nanoparticles or by the reduction of silver ions after their binding to DNA was executed and studied. It was shown that DNA strands with regular location of silver or aluminum nanoparticles can be prepared. The conditions for the formation of silver nanoparticles and silver nanoclusters on DNA were analyzed.

  20. Cultivation of the culinary-medicinal Lung Oyster mushroom, Pleurotus pulmonarius (Fr.) Quél. (Agaricomycetideae) on grass plants in Taiwan.

    Science.gov (United States)

    Liang, Zeng-Chin; Wu, Kuan-Jzen; Wang, Jinn-Chyi; Lin, Chorng-Horng; Wu, Chiu-Yeh

    2011-01-01

    Cultivation of the culinary-medicinal Lung Oyster mushroom, Pleurotus pulmonarius, on the stalks of three grass plants, i.e., Panicum repens, Pennisetum purpureum, and Zea mays were investigated. The effects of various combinatorial substrates on mushroom mycelial growth and yield calculated as biological efficiency (BE) were determined. Among 9 experimental substrates, the most suitable substrate for mycelial growth was 45ZMS:45S, followed by 45PRS:45S; their mycelial growth rates were obviously quicker than that of the control substrate. The BEs of all the experimental substrates respectively containing P. repens stalk, P. purpureum stalk and Z. mays stalk were higher than that of the control (39.55%) during the 2.5 months of cultivation period. The best substrate in terms of BE was 60ZMS:30S (58.33%), followed by 45PRS:45S (57.16%), 45ZMS:45S (49.86%), and 30ZMS:60S (47.20%). Based on the BE of the tested substrates, Z mays stalk appeared to be the best alternative material for the production of P. pulmonarius.

  1. Ultraviolet–Visible photo-response of p-Cu2O/n-ZnO heterojunction prepared on flexible (PET) substrate

    International Nuclear Information System (INIS)

    Elfadill, Nezar G.; Hashim, M.R.; Saron, K.M.A.; Chahrour, Khaled M.; Qaeed, M.A.; Bououdina, M.

    2015-01-01

    The deposition of monocrystalline ZnO nanostructures (using different concentration of reaction solution) on Cu 2 O thin film by hydrothermal method is reported. The mechanism of growing different ZnO nanostructures i.e. nanoneedles, nanotubes and nanorods are explained based on the gradient of Zn + species (resulting from precipitation) in reaction solution. The UV-VIS photo-detection properties of the three selected p-Cu 2 O/n-ZnO heterojunctions are studied by illuminated I–V characteristic and the wavelength dependent photo-responsivity properties. The spectral responsivity curves can be divided into three regions (1.9–2.17 eV), (2.2–2.9 eV) and (>3.2 eV) denoted as A, B and C. The regions A and C are assigned for band to band level absorption in Cu 2 O and ZnO respectively, while region C is associated with a combination of two absorption process: part of photons were absorbed by the band to deep level absorption in ZnO and the transmitted photons were absorbed in Cu 2 O. It is found that the heterojunctions with nanotubes exhibit higher responsivity than other nanostructures, which is mainly due to the large surface-to-volume ratio. - Highlights: • Fabrication of p-Cu 2 O/n-ZnO heterojunction on flexible PET substrate. • Synthesis of different ZnO nanostructures i.e. nanoneedles, nanotubes and nanorods. • The UV-VIS photo-detection properties of p-Cu 2 O/n-ZnO heterojunctions

  2. Mushroom Lectins: Specificity, Structure and Bioactivity Relevant to Human Disease

    Directory of Open Access Journals (Sweden)

    Mohamed Ali Abol Hassan

    2015-04-01

    Full Text Available Lectins are non-immunoglobulin proteins that bind diverse sugar structures with a high degree of selectivity. Lectins play crucial role in various biological processes such as cellular signaling, scavenging of glycoproteins from the circulatory system, cell–cell interactions in the immune system, differentiation and protein targeting to cellular compartments, as well as in host defence mechanisms, inflammation, and cancer. Among all the sources of lectins, plants have been most extensively studied. However, more recently fungal lectins have attracted considerable attention due to their antitumor, antiproliferative and immunomodulatory activities. Given that only 10% of mushroom species are known and have been taxonomically classified, mushrooms represent an enormous unexplored source of potentially useful and novel lectins. In this review we provide an up-to-date summary on the biochemical, molecular and structural properties of mushroom lectins, as well as their versatile applications specifically focusing on mushroom lectin bioactivity.

  3. Cultivation of three types of indigenous wild edible mushrooms ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-17

    Dec 17, 2008 ... effects related to their disposal (Mshandete et al., 2008). Cultivation of mushroom can .... The holes facilitated drainage, aeration (free diffusion of gases and .... sium, iron, copper, manganese, zinc and cobalt) were determined.

  4. Application of ionizing radiation to preservation of mushrooms

    International Nuclear Information System (INIS)

    Smierzchalska, K.; Gubrynowicz, E.

    1979-01-01

    The influence of ionizing radiation on prolongation of preservation time and quality of mushrooms is discussed. Some numerical data are cited. The influence of ionizing radiation on growth rate and physiological processes is also presented. (A.S.)

  5. Economic feasibility of small scale button mushroom production in pakistan

    International Nuclear Information System (INIS)

    Tahir, A.; Hassan, S.

    2013-01-01

    Abstract:- Mushroom is widely cultivated as a proteineous vegetable in many countries of the world including Pakistan. Its cultivation requires less space, care, equipment and cost compared to many other crops and livestock. The present study was conducted in 2010 to estimate the profitability of small scale button mushroom production at National Agricultural Research Centre (NARC) Islamabad, Pakistan. The cost of production methodology was used for this study. The yield and gross return of mushroom was estimated at 155.6 kg ha and Rs.77,800 ha , respectively. The results indicated the fact that mushroom production is very much remunerative to its producers as it can give maximum net return by reducing their cost of production as its cultivation is dependent on the agricultural raw material which is cheaply available. (author)

  6. Induction and evaluation of beneficial mutations in Volvariella volvacea mushroom

    International Nuclear Information System (INIS)

    Borromeo, J.D.

    1976-03-01

    The present strains of Volvariella volvacea are difficult to grow, hence the need for developing a wild-type mushroom that can be grown without the stringent cultural requirements. This would be suitable for backyard or small-scale production. A vigorous white mushroom that responds to the controlled conditions in mushroom houses is appropriate for large-scale or commercial production. The percentages success in getting the ''first flushes'' has been no more than 30%. There was a certain amount of difficulty in recognizing mutants based on their morphological features in laboratory culture. The first irradiation series utilizing 200 and 400 kR and using the box-type method of cultivation in growing the mushroom have given us the needed information in planning the next irradiation series

  7. The Edibility and Cultivation of the Oyster Mushroom.

    Science.gov (United States)

    Brenneman, James; Guttman, Mark C.

    1994-01-01

    Describes an enjoyable and fascinating experience that involves the cultivation of oyster mushrooms. By allowing students to participate in this process, the students are able to better understand the biology and utility of fungi. (ZWH)

  8. Chemical Composition and Bioactive Compounds of Some Wild Edible Mushrooms

    Directory of Open Access Journals (Sweden)

    Melinda NAGY

    2017-05-01

    Full Text Available Over the last decades, the consumption of mushrooms has significantly increased due to the scientific evidence of their ability to help the organism in the combat and prevention of several diseases (Kalac, 2009. Fruiting bodies of mushrooms are consumed as a delicacy for their texture and flavour, but also for their nutritional properties that makes them even more attractable (Heleno S. 2015. In this paper data were collected from several scientific studies with the aim to characterize the chemical composition and content of bioactive compounds of various mushrooms species: Agaricus bisporus, Boletus edulis, Cantharellus cibarius, Pleurotus ostreatus, Lactarius piperatus. The chemical composition of 5 wild edible studied mushrooms, including moisture, ash, total carbohydrates, total sugars, crude fat, crude protein and energy were determined according to AOAC procedures.

  9. Yield response of mushroom ( Agaricus bisporus ) on wheat straw ...

    African Journals Online (AJOL)

    Yield response of mushroom ( Agaricus bisporus ) on wheat straw and waste tea leaves based composts using supplements of some locally available peats and their mixture with some secondary casing materials.

  10. Cultivation of mushroom (Volvariella volvacea) on banana leaves

    African Journals Online (AJOL)

    SERVER

    percentage of the fibre components being degraded. The crude protein ... incubation of the mushroom due probably to the addition of microbial protein. The acid ... a plastic or tent-like construction or bamboo frame stretched with plastic film ...

  11. Shiitake mushroom production on small diameter oak logs in Ohio

    Science.gov (United States)

    S.M. Bratkovich

    1991-01-01

    Yields of different strains of shiitake mushrooms (Lentinus edodes) were evaluated when produced on small diameter oak logs in Ohio. Logs averaging between 3-4 inches in diameter were inoculated with four spawn strains in 1985.

  12. Utilization of whey powder as substrate for low-cost preparation of β-galactosidase as main product, and ethanol as by-product, by a litre-scale integrated process.

    Science.gov (United States)

    You, Shengping; Chang, Hongxing; Yin, Qingdian; Qi, Wei; Wang, Mengfan; Su, Rongxin; He, Zhimin

    2017-12-01

    Whey powder, a by-product of dairy industry, is an attractive raw material for value-added products. In this study, utilization of whey powder as substrate for low-cost preparation of β-galactosidase as main product and ethanol as by-product were investigated by a litre-scale integrated strategy, encompassing fermentation, isolation, permeabilization and spray drying. Firstly, through development of low-cost industrial culture and fed-batch strategies by Kluyveromyces lactis, 119.30U/mL β-galactosidase activity and 16.96mg/mL by-product ethanol were achieved. Afterward, an up-dated mathematic model for the recycling permeabilization was established successfully and 30.4g cells sediment isolated from 5L fermentation broth were permeabilized completely by distilled ethanol from broth supernatant. Then β-galactosidase product with 5.15U/mg from protection of gum acacia by spray drying was obtained. Furthermore, by-product ethanol with 31.08% (v/v) was achieved after permeabilization. Therefore, the integrated strategy using whey powder as substrate is a feasible candidate for industrial-scale implementation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Critical current density and microwave surface resistance of 5-cm-diameter YBCO films on LaAlO3 substrates prepared by MOD using an infrared image furnace

    International Nuclear Information System (INIS)

    Manabe, T.; Kondo, W.; Yamaguchi, I.; Sohma, M.; Tsuchiya, T.; Tsukada, K.; Mizuta, S.; Kumagai, T.

    2005-01-01

    Inductive critical current density (J c ) and microwave surface resistance (R s ) were investigated for 0.7-μm-thick epitaxial YBa 2 Cu 3 O 7-y (YBCO) films on 5-cm-diameter LaAlO 3 substrates prepared by a chemical solution-based metal organic deposition (MOD) process using an infrared image furnace. By varying the heating rate at ramp during the final heat treatment, we obtained various orientations of YBCO; the c- and a-axis orientation at a slower rate, i.e., 20-100 deg C/min while the pure c-axis orientation at a faster rate, 200 deg C/min. The c-axis-oriented YBCO films showed excellent superconducting properties; for example, a high inductive-J c (77 K) of 2.6 MA/cm 2 and low R s (12 GHz)'s of 0.24 and 0.52 mΩ at 50 and 77 K, respectively, by a sapphire rod resonator method. The c- and a-axis-oriented films exhibited a lower J c and a higher R s . It was found that the J c and R s values of MOD-derived YBCO films showed a strong correlation; approximately, R s is inversely proportional to J c . This correlation is in good agreement with a previous report by Ohshima et al. for sputtered-YBCO films on BaSnO 3 -buffered MgO substrates

  14. Uptake and transfer factors of 137Cs by mushrooms

    International Nuclear Information System (INIS)

    Heinrich, G.

    1991-01-01

    The 137 Cs content of 118 species (668 samples) of higher fungi collected in the period from August 1984 to October 1989 at three different locations in Styria, Austria, was determined by gamma-spectrometry. The Cs-content of most mushrooms has been increasing since September 1986. In order to find out which factors determine the 137 Cs-contamination of mushrooms and the transfer-value soil to mushroom, the concentration of total and plant-available radiocesium in soils as well as the pH-value, the content of humus, clay, silt, sand, exchangeable cations, the composition of the clay minerals, and the particle size distribution of the soils of two different locations were examined. The higher the 137 Cs contamination of the soil, the thicker the layer of humus and the higher the content of humus, the lower the pH-value, and the lower the amount of essential cations, especially of K + , the higher the amount of 137 Cs plant-available will be. Therefore, the contamination of the mushrooms in the coniferous forest of Koralpenblick (1000 m) is higher than in the mixed forest at the Rosenberg around Graz at approx. 500 m height. Of 26 different species of mushrooms measured at both sites, only 61% show the highest TF-values soil to mushrooms also at the Koralpenblick. In the spruce forest at Koralpenblick there are many species of mushrooms with high 137 Cs-contamination which were not found at the Rosenberg. However, the properties of the species to which a mushroom belongs are more important than environmental conditions and soil properties. The transfer values of 40 K stay within narrow bounds, whereas those of 137 Cs differ widely. (orig.)

  15. Comparative study of wild edible mushrooms as sources of antioxidants.

    Science.gov (United States)

    Witkowska, Anna M; Zujko, Małgorzata E; Mirończuk-Chodakowska, Iwona

    2011-01-01

    The purpose of the study was to explore sixteen of the most popular edible species of wild-growing mushrooms as potential sources of antioxidants. Among the mushrooms tested, the highest total polyphenol contents, exceeding 100 mg/100 g fresh mass, were found in five mushrooms: Boletus chrysenteron, B. edulis, Leccinum scabrum, L. aurantiacum, and Macrolepiota procera. Antioxidant activity was measured with the FRAP, TEAC, DPPH scavenging ability and ferrous ions chelating ability assays. Results of the study show that wild mushrooms vary according to their antioxidant properties. The highest FRAP potentials, exceeding 1 mmol/100 g, were found in five species ofBoletales: Boletus edulis, B. chrysenteron, Leccinum scabrum, L. aurantiacum, and Suillus grevillei. TEAC values were from 1.07 to 4.01 mmol/100 g fresh mass. High TEAC values (>2.3 mmol/100 g) were found in Leccinum scabrum, L. aurantiacum, Macrolepiota procera, Boletus chrysenteron, and B. edulis. The DPPH radical scavenging effectiveness of mushroom extracts, expressed as EC50 values, was in range 2.91-13.86 mg/mL. Scavenging ability was the highest for B. edulis and B. chrysenteron. The metal chelating ability of mushroom extracts expressed as ECso values of chelating ability on ferrous ions were from 8.02 mg/mL in Cantharellus cibarius to 12.10 mg/mL in Suillus luteus. Among the mushrooms tested, Boletus chrysenteron and B. edulis were characterized by high scores of polyphenol contents and antioxidant activity in the FRAP, TEAC, and DPPH assays. These results place these culinary species of wild-growing mushrooms among products with considerable antioxidant potential.

  16. Activity of 137Cs in mushrooms from Slovak Republic

    International Nuclear Information System (INIS)

    Benova, K.; Novakova, J.; Dvorak, P.

    2006-01-01

    In this paper, activity concentrations of radiocesium in mushrooms from various locations in the Slovak Republic during the year 2001 are presented. The highest activity concentration of 137 Cs measured was 966 Bq/kg, for Suillus luteus from Senica. Mushrooms belonging to Boletaceae which grow in Central Europe are not only bio-indicators of the environmental contamination with radiocesium, but might also represent depending on their actual radiocesium contamination - some risk factor if consumed too extensively. (authors)

  17. ANTAGONISTIC EFFECT OF EDIBLE MUSHROOM EXTRACT ON CANDIDA ALBICANS GROWTH

    Directory of Open Access Journals (Sweden)

    Paccola Edneia A. de Souza

    2001-01-01

    Full Text Available Five species of edible mushrooms, Lentinula edodes, Pleurotus ostreatus, Pholiota nameko, Macrolepiota bonaerensis and Agaricus blazei, were tested for their potential to inhibit the in vitro growth of the pathogenic yeast Candida albicans. Only L. edodes had a fungistatic effect on this human pathogen. The inhibitory compound was produced intra and extracellularly in submersed L. edodes culture, and was also present in fresh and dehydrated mushroom basidiocarps. The fungistatic compound was heat sensitive and lost activity after 72 hours.

  18. The use of the ITS region in marketable mushrooms authenticity

    OpenAIRE

    Nogueira, Liliana; Oliveira, Ivo; Baptista, Paula

    2010-01-01

    Edible mushrooms, due to their flavour and nutritional characteristics, are very popular in many dishes. Some species are high valuated and reaching high market values. There are frequent reports of adulteration of these kinds of products due to the presence of fungal species less expensive among others with high-value market. This adulteration occurs especially in products in which the flavour is not prominent and in which the mushrooms are difficult to examine. In this work we utilized the ...

  19. Bioremediation of industrial waste through mushroom cultivation.

    Science.gov (United States)

    Kulshreshtha, Shweta; Mathur, Nupur; Bhatnagar, Pradeep; Jain, B L

    2010-07-01

    Handmade paper and cardboard industries are involved in processing of cellulosic and ligno-cellulosic substances for making paper by hand or simple machinery. In the present study solid sludge and effluent of both cardboard and handmade paper industries was collected for developing a mushroom cultivation technique to achieve zero waste discharges. Findings of present research work reveals that when 50% paper industries waste is used by mixing with 50% (w/w) wheat straw, significant increase (96.38%) in biological efficiency over control of wheat straw was observed. Further, cultivated basidiocarps showed normal morphology of stipe and pileus. Cross section of lamellae did not show any abnormality in the attachment of basidiospores, hymenal trama and basidium. No toxicity was found when fruiting bodies were tested chemically.

  20. USE OF ARTIFICIAL LIGHT IN MUSHROOM CULTIVATION

    Directory of Open Access Journals (Sweden)

    N. L. Poyedinok

    2013-12-01

    Full Text Available Artificial light is used in greenhouses to increase productivity and quality of agricultural and ornamental plants. Despite the awareness of the fact that light also plays important role in the life of nonhotosynthetic organisms, such as fungi, its using in their biotechnology cultivation is currently limited. Science has quite a large amount information about the influence of artificial light of different nature on morphogenesis, metabolic processes and productivity of more than 100 species of fungi, many of which are valuable producers of biologically active compounds. Themechanisms of photoreactions of various fungi, which is an integral part of a purposeful photoregulation their activity in biotechnological processes are described. The analysis of the researches and of the experience of their practical application allows predicting potential of using artificial light in mushroom growing industry, as well as in creating highly productive, environmentally clean technologies of targeted synthesis of the final product.