WorldWideScience

Sample records for multisampling reporter system

  1. Design, manufacture and evaluation of a hydraulically installed, multi-sampling lysimeter. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Scroppo, J.A.; Scroppo, G.L. [Bladon International, Inc., Oak Brook, IL (United States); Carty, R.H.; Chaimberg, M. [Institute of Gas Technology, Chicago, IL (United States); Timmons, R.D.; O`Donnell, M. [Timco Mfg., Inc., Prairie du Sac, WI (United States)

    1992-06-01

    There is a need for a quick, simple, reliable, and inexpensive on-site method for sampling soil pollutants before they reach the groundwater. Vadose zone monitoring is an important aspect of sound groundwater management. In the vadose zone, where water moves via percolation, this water medium possesses the ability to transfer hazardous wastes to the nation`s groundwater system. Obtaining samples of moisture and contaminants from the vadose zone is necessary if potential problems are to be identified before they reach the water table. Accurate determination of spatial distribution, movement, and concentrations of contaminants is essential to the selection of remediation technologies. There is a need for three-dimentional subsurface characterization technologies to identify the location of hazardous plumes and their migration. Current subsurface characterization methods for dispersed contaminants primarily involve a time consuming, expensive process for drilling wells and taking samples. With no major water flow in the vadose zone, conventional monitoring wells will not function as designed. The multi-sampling lysimeter can be readily linked with physical and chemical sensors for on-site screening. The hydraulically-installed suction lysimeter was capable of extracting soil pore liquid samples from unsaturated test soils without the need to predrill a well. Test results verified that the lysimeters installed with a hydraulic or mechanical ram were able to collect soil pore liquid samples in excess of the amount typically required for monitoring and analysis on a daily basis. Modifications to the prototype design eliminated moving parts and the need for inflatable packers. The elimination of the packer system and the use of porous nickel contributed to increased system ruggedness.

  2. A Multi-Sample Cs-Sputter Negative Ion Source

    Energy Technology Data Exchange (ETDEWEB)

    Alton, G.D.; Ball, J.A.; Bao, Y.; Cui, B.; Reed, C.A.; Williams, C.

    1998-10-05

    A multi-sample Cs sputter negative-ion source, equipped with a conical-geometry, W-surface-ionizer has been designed and fabricated that permits sample changes without disruption of on-line accelerator operation. Sample changing is effected by actuating an electro-pneumatic control system located at ground potential that drives an air-motor-driven sample-indexing-system mounted at high voltage; this arrangement avoids complications associated with indexing mechanisms that rely on electronic power-supplies located at high potential. In-beam targets are identified by LED indicator lights derived from a fiber-optic, Gray-code target-position sensor. Aspects of the overall source design and details of the indexing mechanism along with operational parameters, ion optics. intensities, and typical emittances for a variety of negative-ion species will be presented in this report.

  3. Rapid Multisample Analysis for Simultaneous Determination of Anthropogenic Radionuclides in Marine Environment

    DEFF Research Database (Denmark)

    Qiao, Jixin; Shi, Keliang; Hou, Xiaolin

    2014-01-01

    An automated multisample processing flow injection (FI) system was developed for simultaneous determination of technetium, neptunium, plutonium, and uranium in large volume (200 L) seawater. Ferrous hydroxide coprecipitation was used for the preliminary sample treatment providing the merit...

  4. A multi-sample Cs-sputter negative-ion source

    Energy Technology Data Exchange (ETDEWEB)

    Alton, G.D.; Cui, B.; Bao, Y.; Reed, C.A.; Ball, J.A.; Williams, C. (Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, Tennessee 37831-6368 (United States))

    1999-04-01

    A multi-sample Cs sputter negative-ion source, equipped with a conical-geometry, W-surface-ionizer has been designed and fabricated that permits sample changes without disruption of on-line accelerator operation. Sample changing is effected by actuating an electro-pneumatic control system located at ground potential that drives an air-motor-driven sample-indexing-system mounted at high voltage; this arrangement avoids complications associated with indexing mechanisms that rely on electronic power-supplies located at high potential. In-beam targets are identified by LED indicator lights derived from a fiber-optic, Gray-code target-position sensor. Aspects of the overall source design and details of the indexing mechanism along with operational parameters, ion optics, intensities, and typical emittances for a variety of negative-ion species will be presented in this report. [copyright] [ital 1999 American Institute of Physics.

  5. Fast and scalable inference of multi-sample cancer lineages.

    KAUST Repository

    Popic, Victoria

    2015-05-06

    Somatic variants can be used as lineage markers for the phylogenetic reconstruction of cancer evolution. Since somatic phylogenetics is complicated by sample heterogeneity, novel specialized tree-building methods are required for cancer phylogeny reconstruction. We present LICHeE (Lineage Inference for Cancer Heterogeneity and Evolution), a novel method that automates the phylogenetic inference of cancer progression from multiple somatic samples. LICHeE uses variant allele frequencies of somatic single nucleotide variants obtained by deep sequencing to reconstruct multi-sample cell lineage trees and infer the subclonal composition of the samples. LICHeE is open source and available at http://viq854.github.io/lichee .

  6. Multi-Sampling Ionization Chamber (MUSIC) for measurements of fusion reactions with radioactive beams

    Energy Technology Data Exchange (ETDEWEB)

    Carnelli, P.F.F. [Physics Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Laboratorio TANDAR, Comisión Nacional de Energía Atómica, Av. Gral. Paz 1499, B1650KNA, San Martín, Buenos Aires (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas, Av. Rivadavia 1917, C1033AAJ Buenos Aires (Argentina); Almaraz-Calderon, S. [Physics Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Rehm, K.E., E-mail: rehm@anl.gov [Physics Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Albers, M.; Alcorta, M.; Bertone, P.F.; Digiovine, B.; Esbensen, H. [Physics Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Fernández Niello, J. [Laboratorio TANDAR, Comisión Nacional de Energía Atómica, Av. Gral. Paz 1499, B1650KNA, San Martín, Buenos Aires (Argentina); Universidad Nacional de San Martín, Campus Miguelete, B1650BWA San Martín, Buenos Aires (Argentina); Henderson, D.; Jiang, C.L. [Physics Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Lai, J. [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803 (United States); Marley, S.T.; Nusair, O.; Palchan-Hazan, T.; Pardo, R.C. [Physics Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Paul, M. [Racah Institute of Physics, Hebrew University, Jerusalem (Israel); Ugalde, C. [Physics Division, Argonne National Laboratory, Argonne, IL 60439 (United States)

    2015-11-01

    A detection technique for high-efficiency measurements of fusion reactions with low-intensity radioactive beams was developed. The technique is based on a Multi-Sampling Ionization Chamber (MUSIC) operating as an active target and detection system, where the ionization gas acts as both target and counting gas. In this way, we can sample an excitation function in an energy range determined by the gas pressure, without changing the beam energy. The detector provides internal normalization to the incident beam and drastically reduces the measuring time. In a first experiment we tested the performance of the technique by measuring the {sup 10,13,15}C+{sup 12}C fusion reactions at energies around the Coulomb barrier.

  7. Multi-Sampling Ionization Chamber (MUSIC) for measurements of fusion reactions with radioactive beams

    Science.gov (United States)

    Carnelli, P. F. F.; Almaraz-Calderon, S.; Rehm, K. E.; Albers, M.; Alcorta, M.; Bertone, P. F.; Digiovine, B.; Esbensen, H.; Fernández Niello, J.; Henderson, D.; Jiang, C. L.; Lai, J.; Marley, S. T.; Nusair, O.; Palchan-Hazan, T.; Pardo, R. C.; Paul, M.; Ugalde, C.

    2015-11-01

    A detection technique for high-efficiency measurements of fusion reactions with low-intensity radioactive beams was developed. The technique is based on a Multi-Sampling Ionization Chamber (MUSIC) operating as an active target and detection system, where the ionization gas acts as both target and counting gas. In this way, we can sample an excitation function in an energy range determined by the gas pressure, without changing the beam energy. The detector provides internal normalization to the incident beam and drastically reduces the measuring time. In a first experiment we tested the performance of the technique by measuring the 10,13,15C+12C fusion reactions at energies around the Coulomb barrier.

  8. A multi-sample changer coupled to an electron cyclotron resonance source for accelerator mass spectrometry experiments.

    Science.gov (United States)

    Vondrasek, R; Palchan, T; Pardo, R; Peters, C; Power, M; Scott, R

    2014-02-01

    A new multi-sample changer has been constructed allowing rapid changes between samples. The sample changer has 20 positions and is capable of moving between samples in 1 min. The sample changer is part of a project using Accelerator Mass Spectrometry (AMS) at the Argonne Tandem Linac Accelerator System (ATLAS) facility to measure neutron capture rates on a wide range of actinides in a reactor environment. This project will require the measurement of a large number of samples previously irradiated in the Advanced Test Reactor at Idaho National Laboratory. The AMS technique at ATLAS is based on production of highly charged positive ions in an electron cyclotron resonance ion source followed by acceleration in the ATLAS linac. The sample material is introduced into the plasma via laser ablation chosen to limit the dependency of material feed rates upon the source material composition as well as minimize cross-talk between samples.

  9. Marketing reporting system

    Directory of Open Access Journals (Sweden)

    Hanić Hasan M.

    2004-01-01

    Full Text Available The main components of a developed and good organized marketing information system are: internal reporting system, marketing reporting system, market research system and analytical marketing system. Marketing reporting system provides data and information about changes in business and micro marketing environment. This component of MIS ensures that marketing managers are up-to-date with what is going on, and to be informed about changes in company marketing environment.

  10. Marketing reporting system

    OpenAIRE

    Hanić Hasan M.

    2004-01-01

    The main components of a developed and good organized marketing information system are: internal reporting system, marketing reporting system, market research system and analytical marketing system. Marketing reporting system provides data and information about changes in business and micro marketing environment. This component of MIS ensures that marketing managers are up-to-date with what is going on, and to be informed about changes in company marketing environment.

  11. National Outbreak Reporting System

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Outbreak Reporting System (NORS) is a web-based platform designed to support reporting to CDC by local, state, and territorial health departments in the...

  12. Integrated Reporting Information System -

    Data.gov (United States)

    Department of Transportation — The Integrated Reporting Information System (IRIS) is a flexible and scalable web-based system that supports post operational analysis and evaluation of the National...

  13. Measurement System & Calibration report

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    This Measurement System & Calibration report is describing DTU’s measurement system installed at a specific wind turbine. A major part of the sensors has been installed by others (see [1]) the rest of the sensors have been installed by DTU. The results of the measurements, described in this report...

  14. Critical incident reporting systems.

    Science.gov (United States)

    Ahluwalia, Jag; Marriott, Lin

    2005-02-01

    Approximately 10% of all hospital admissions are complicated by critical incidents in which harm is caused to the patient - this amounts to more than 850,000 incidents annually. Critical incident reporting (CIR) systems refer to the structured reporting, collation and analysis of such incidents. This article describes the attributes required for an effective CIR system. Example neonatal trigger events and a management pathway for handling a critical incident report are described. The benefits and limitations of CIR systems, reactive and prospective approaches to the analysis of actual or potential critical incidents and the assessment of risk are also reviewed. Individual human error is but one contributor in the majority of critical incidents. Recognition of this and the fostering of an organisational culture that views critical incident reports as an opportunity to learn and to improve future patient care is vital if CIR systems are to be effective.

  15. Rapid Surface Sampling and Archival Record (RSSAR) System. Topical report, October 1, 1993--December 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This report describes the results of Phase 1 efforts to develop a Rapid Surface Sampling and Archival Record (RSSAR) System for the detection of semivolatile organic contaminants on concrete, transite, and metal surfaces. The characterization of equipment and building surfaces for the presence of contaminants as part of building decontamination and decommissioning activities is an immensely large tacks of concern to both government and industry. Contaminated and clean materials must be clearly identified and segregated so that the clean materials can be recycled or reused, if possible, or disposed of more cheaply as nonhazardous waste. Characterization of building and equipment surfaces will be needed during initial investigations, during cleanup operations, and during the final confirmatory process, increasing the total number of samples well beyond that needed for initial characterization. This multiplicity of information places a premium on the ability to handle and track data as efficiently as possible. Aware of the shortcomings of traditional surface characterization technology, GE, with DOE support has undertaken a 12-month effort to complete Phase 1 of a proposed four-phase program to develop the RSSAR system. The objectives of this work are to provide instrumentation to cost-effectively sample concrete and steel surfaces, provide a quick-look indication for the presence or absence of contaminants, and collect samples for later, more detailed analysis in a readily accessible and addressable form. The Rapid Surface Sampling and Archival Record (RSSAR) System will be a modular instrument made up of several components: (1) sampling heads for concrete surfaces, steel surfaces, and bulk samples; (2) quick-look detectors for photoionization and ultraviolet; (3) multisample trapping module to trap and store vaporized contaminants in a manner suitable for subsequent detailed lab-based analyses.

  16. Nigeria Mission Performance Reporting System

    Data.gov (United States)

    US Agency for International Development — The Performance Reporting System (PRS) is a reporting system that enables USAID/Nigeria Implementing Partners to report their performance data and USAID/Nigeria...

  17. Integrated system checkout report

    Energy Technology Data Exchange (ETDEWEB)

    1991-08-14

    The planning and preparation phase of the Integrated Systems Checkout Program (ISCP) was conducted from October 1989 to July 1991. A copy of the ISCP, DOE-WIPP 90--002, is included in this report as an appendix. The final phase of the Checkout was conducted from July 10, 1991, to July 23, 1991. This phase exercised all the procedures and equipment required to receive, emplace, and retrieve contact handled transuranium (CH TRU) waste filled dry bins. In addition, abnormal events were introduced to simulate various equipment failures, loose surface radioactive contamination events, and personnel injury. This report provides a detailed summary of each days activities during this period. Qualification of personnel to safely conduct the tasks identified in the procedures and the abnormal events were verified by observers familiar with the Bin-Scale CH TRU Waste Test requirements. These observers were members of the staffs of Westinghouse WID Engineering, QA, Training, Health Physics, Safety, and SNL. Observers representing a number of DOE departments, the state of new Mexico, and the Defense Nuclear Facilities Safety Board observed those Checkout activities conducted during the period from July 17, 1991, to July 23, 1991. Observer comments described in this report are those obtained from the staff member observers. 1 figs., 1 tab.

  18. Fuels Reporting System Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes compliance data (registrations and reports), including reports related to reformulated gasoline and conventional gasoline (anti-dumping),...

  19. Physician Quality Reporting System

    Data.gov (United States)

    U.S. Department of Health & Human Services — PQRS is a reporting program that uses a combination of incentive payments and negative payment adjustments to promote reporting of quality information by eligible...

  20. System integration report

    Science.gov (United States)

    Badler, N. I.; Korein, J. D.; Meyer, C.; Manoochehri, K.; Rovins, J.; Beale, J.; Barr, B.

    1985-01-01

    Several areas that arise from the system integration issue were examined. Intersystem analysis is discussed as it relates to software development, shared data bases and interfaces between TEMPUS and PLAID, shaded graphics rendering systems, object design (BUILD), the TEMPUS animation system, anthropometric lab integration, ongoing TEMPUS support and maintenance, and the impact of UNIX and local workstations on the OSDS environment.

  1. Calibration Systems Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Myers, Tanya L.; Broocks, Bryan T.; Phillips, Mark C.

    2006-02-01

    The Calibration Systems project at Pacific Northwest National Laboratory (PNNL) is aimed towards developing and demonstrating compact Quantum Cascade (QC) laser-based calibration systems for infrared imaging systems. These on-board systems will improve the calibration technology for passive sensors, which enable stand-off detection for the proliferation or use of weapons of mass destruction, by replacing on-board blackbodies with QC laser-based systems. This alternative technology can minimize the impact on instrument size and weight while improving the quality of instruments for a variety of missions. The potential of replacing flight blackbodies is made feasible by the high output, stability, and repeatability of the QC laser spectral radiance.

  2. Contractor Performance Assessment Reporting System

    Data.gov (United States)

    US Agency for International Development — CPARS is a web-based system used to input data on contractor performance. Reports from the system are used as an aid in awarding contracts to contractors that...

  3. Measurement System and Calibration report

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    This Measurement System & Calibration report is describing DTU’s measurement system installed at a specific wind turbine. A major part of the sensors has been installed by others (see [1]) the rest of the sensors have been installed by DTU. The results of the measurements, described in this report...

  4. LCLS XTOD Attenuator System System Concept Report

    Energy Technology Data Exchange (ETDEWEB)

    Kishiyama, K; Roeben, M; Trent, J; Ryutov, D; Shen, S

    2006-04-12

    The attenuator system for the Linac Coherent Light Source (LCLS) X-ray Transport, Optics and Diagnostics (XTOD) system has been configured and analyzed by the Lawrence Livermore National Laboratory's New Technologies Engineering Division (NTED) as requested by the SLAC/LCLS program. The system layout, performance analyses and selection of the vacuum components are presented in this System Conceptual Review (SCR) report. Also included are the plans for prototype, procurement, mechanical integration, and the cost estimates.

  5. Water Fluoridation Reporting System (Public Water Systems)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Water Fluoridation Reporting System (WFRS) has been developed to provide tools to assist states in managing fluoridation programs. WFRS is designed to track all...

  6. Adverse Event Reporting System (AERS)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Adverse Event Reporting System (AERS) is a computerized information database designed to support the FDA's post-marketing safety surveillance program for all...

  7. Vessel Electronic Reporting System (VERS)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The VERS system is composed of a database and other related applications which facilitate the reporting of electronically collected research data via Fisheries...

  8. SPECTR System Operational Test Report

    Energy Technology Data Exchange (ETDEWEB)

    W.H. Landman Jr.

    2011-08-01

    This report overviews installation of the Small Pressure Cycling Test Rig (SPECTR) and documents the system operational testing performed to demonstrate that it meets the requirements for operations. The system operational testing involved operation of the furnace system to the design conditions and demonstration of the test article gas supply system using a simulated test article. The furnace and test article systems were demonstrated to meet the design requirements for the Next Generation Nuclear Plant. Therefore, the system is deemed acceptable and is ready for actual test article testing.

  9. A hypermedia radiological reporting system.

    Science.gov (United States)

    De Simone, M; Drudi, F M; Lalle, C; Poggi, R; Ricci, F L

    1997-01-01

    Report is the main phase of a diagnostic process by images. The product of the process is the diagnostic report. We are proposing an hypermedia structure of diagnostic report in radiology, in order to facilitate exchange between radiologist and clinician (specialist in internal medicine or surgeon) on a clinical case, without anymore charge on the side of the radiologist but with an 'off-line' consultation. An hypermedia radiological report software will produce further advantages in many aspects: radiologist and clinician could access patient's data directly from DB on patients; radiologist could check DB on exemplary cases real-time; clinician could read preliminary and final reports available in network and make requests online. The proposed hyper-report system is modular. Starting from the 'report text' writing, edited by the radiologist on the basis of most significative images, it is possible to insert comments in text, drawing and 'external' images form.

  10. Measurement System and Calibration report

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Villanueva, Héctor

    This Measurement System & Calibration report is describing DTU’s measurement system installed at a specific wind turbine. A major part of the sensors has been installed by others (see [1]) the rest of the sensors have been installed by DTU. The results of the measurements, described in this repor...

  11. 2014 Runtime Systems Summit. Runtime Systems Report

    Energy Technology Data Exchange (ETDEWEB)

    Sarkar, Vivek [US Dept. of Energy, Washington, DC (United States); Budimlic, Zoran [US Dept. of Energy, Washington, DC (United States); Kulkani, Milind [US Dept. of Energy, Washington, DC (United States)

    2016-09-19

    This report summarizes runtime system challenges for exascale computing, that follow from the fundamental challenges for exascale systems that have been well studied in past reports, e.g., [6, 33, 34, 32, 24]. Some of the key exascale challenges that pertain to runtime systems include parallelism, energy efficiency, memory hierarchies, data movement, heterogeneous processors and memories, resilience, performance variability, dynamic resource allocation, performance portability, and interoperability with legacy code. In addition to summarizing these challenges, the report also outlines different approaches to addressing these significant challenges that have been pursued by research projects in the DOE-sponsored X-Stack and OS/R programs. Since there is often confusion as to what exactly the term “runtime system” refers to in the software stack, we include a section on taxonomy to clarify the terminology used by participants in these research projects. In addition, we include a section on deployment opportunities for vendors and government labs to build on the research results from these projects. Finally, this report is also intended to provide a framework for discussing future research and development investments for exascale runtime systems, and for clarifying the role of runtime systems in exascale software.

  12. Experimental lithium system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kolowith, R.; Berg, J.D.; Miller, W.C.

    1985-04-01

    A full-scale mockup of the Fusion Materials Irradiation Test (FMIT) Facility lithium system was built at the Hanford Engineering Development Laboratory (HEDL). This isothermal mockup, called the Experimental Lithium System (ELS), was prototypic of FMIT, excluding the accelerator and dump heat exchanger. This 3.8 m/sup 3/ lithium test loop achieved over 16,000 hours of safe and reliable operation. An extensive test program demonstrated satisfactory performance of the system components, including the HEDL-supplied electromagnetic lithium pump, the lithium jet target, the purification and characterization hardware, as well as the auxiliary argon and vacuum systems. Experience with the test loop provided important information on system operation, performance, and reliability. This report presents a complete overview of the entire Experimental Lithium System test program and also includes a summary of such areas as instrumentation, coolant chemistry, vapor/aerosol transport, and corrosion.

  13. Integrated clinical, whole-genome, and transcriptome analysis of multisampled lethal metastatic prostate cancer

    Science.gov (United States)

    Bova, G. Steven; Kallio, Heini M.L.; Annala, Matti; Kivinummi, Kati; Högnäs, Gunilla; Häyrynen, Sergei; Rantapero, Tommi; Kivinen, Virpi; Isaacs, William B.; Tolonen, Teemu; Nykter, Matti; Visakorpi, Tapio

    2016-01-01

    We report the first combined analysis of whole-genome sequence, detailed clinical history, and transcriptome sequence of multiple prostate cancer metastases in a single patient (A21). Whole-genome and transcriptome sequence was obtained from nine anatomically separate metastases, and targeted DNA sequencing was performed in cancerous and noncancerous foci within the primary tumor specimen removed 5 yr before death. Transcriptome analysis revealed increased expression of androgen receptor (AR)-regulated genes in liver metastases that harbored an AR p.L702H mutation, suggesting a dominant effect by the mutation despite being present in only one of an estimated 16 copies per cell. The metastases harbored several alterations to the PI3K/AKT pathway, including a clonal truncal mutation in PIK3CG and present in all metastatic sites studied. The list of truncal genomic alterations shared by all metastases included homozygous deletion of TP53, hemizygous deletion of RB1 and CHD1, and amplification of FGFR1. If the patient were treated today, given this knowledge, the use of second-generation androgen-directed therapies, cessation of glucocorticoid administration, and therapeutic inhibition of the PI3K/AKT pathway or FGFR1 receptor could provide personalized benefit. Three previously unreported truncal clonal missense mutations (ABCC4 p.R891L, ALDH9A1 p.W89R, and ASNA1 p.P75R) were expressed at the RNA level and assessed as druggable. The truncal status of mutations may be critical for effective actionability and merit further study. Our findings suggest that a large set of deeply analyzed cases could serve as a powerful guide to more effective prostate cancer basic science and personalized cancer medicine clinical trials. PMID:27148588

  14. Multi-sample immunoassay inside optical fiber capillary enabled by evanescent wave detection

    Directory of Open Access Journals (Sweden)

    Chun-Wei Wang

    2016-03-01

    Full Text Available A novel evanescent wave-based (EW microfluidic capillary fiber-optic biosensor (MCFOB has been developed using capillaries as a transducer embedded in a multichannel device to enhance the collection efficiency of the fluorescence signal. The capillary serves dual roles as a waveguide and a container, enabling more straightforward, consistent, and compact biosensor packaging compared to conventional optical fiber biosensors and microfluidic systems. In order to detect multiple samples in one device, the biosensor incorporates a polydimethysiloxane (PDMS multi-channel device, which also serves as cladding for the biosensor. In addition, this biosensor only consumes 10 μl of a sample and does not require hydrofluoric acid etching in the fabrication process. The orientation for signal collection is optimized by comparing the lateral and normal signal directions for detected glyceraldehyde 3-phosphate dehydrogenase (GAPDH. C-reactive protein (CRP is used to validate the MCFOB, and the limit of detection (LOD for CRP in the MCFOB is 1.94 ng/ml (74 pM. Moreover, the real-time measurement is demonstrated to verify that the evanescent wave is the only exciting light source in the MCFOB, which gives the potential for real-time measurement applications.

  15. Faraday rotation system. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    Bauman, L.E.; Wang, W.

    1994-07-01

    The Faraday Rotation System (FRS) is one of the advanced laser-based diagnostics developed at DIAL to provide support for the demonstration of prototype-scale coal-fired combustion magnetohydrodynamic (MHD) electrical power generation. Intended for application in the MHD channel, the system directly measures electron density through a measurement of the induced rotation in the polarization of a far infrared laser beam after passing through the MHD flow along the magnetic field lines. A measurement of the induced polarization ellipticity provides a measure of the electron collision frequency which together with the electron density gives the electron conductivity, a crucial parameter for MHD channel performance. The theory of the measurements, a description of the system, its capabilities, laboratory demonstration measurements on seeded flames with comparison to emission absorption measurements, and the current status of the system are presented in this final report.

  16. Robust and economical multi-sample, multi-wavelength UV/vis absorption and fluorescence detector for biological and chemical contamination

    CERN Document Server

    Lu, Peter J; Macarthur, James B; Sims, Peter A; Ma, Hongshen; Slocum, Alexander H

    2012-01-01

    We present a portable multi-channel, multi-sample UV/vis absorption and fluorescence detection device, which has no moving parts, can operate wirelessly and on batteries, interfaces with smart mobile phones or tablets, and has the sensitivity of commercial instruments costing an order of magnitude more. We use UV absorption to measure the concentration of ethylene glycol in water solutions at all levels above those deemed unsafe by the United States Food and Drug Administration; in addition we use fluorescence to measure the concentration of d-glucose. Both wavelengths can be used concurrently to increase measurement robustness and increase detection sensitivity. Our small robust economical device can be deployed in the absence of laboratory infrastructure, and therefore may find applications immediately following natural disasters, and in more general deployment for much broader-based testing of food, agricultural and household products to prevent outbreaks of poisoning and disease.

  17. 多组样本下GL-统计量的渐近性质%Approximation Properties of GL-Statistic under Multi-Sample

    Institute of Scientific and Technical Information of China (English)

    李泽慧; 刘烈

    2001-01-01

    In this paper, we attempt to get the approximate distribution of multi-sample GL-statistic. Using the GGateaux differential approximation method, we establish a set of qualifications under which multi-i.i.d.-samplc GL-statistic is approximately normally distributed. Thereby it is extended that GL-statistic approximate normal distribution under i.i.d. sample.%本文上要讨论多组样本下 GL-统计量的渐近分布。这里我们使用了Gateaut微分逼近方法,在多组i.i.d.样本下,给出了GL-统计量的渐近正态分布的一组条件,从而拓广了i.i.d.样本下GL-统计量的渐近正态分布的性质[1].

  18. National Fire Incident Reporting System (NFIRS)

    Data.gov (United States)

    Department of Homeland Security — The National Fire Incident Reporting System (NFIRS) is a reporting standard that fire departments use to uniformly report on the full range of their activities, from...

  19. Tank waste remediation system mission analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Acree, C.D.

    1998-01-06

    The Tank Waste Remediation System Mission Analysis Report identifies the initial states of the system and the desired final states of the system. The Mission Analysis Report identifies target measures of success appropriate to program-level accomplishments. It also identifies program-level requirements and major system boundaries and interfaces.

  20. Northeast Electronic Reporting System (NERS)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA/NEFSC Study fleets are a subset of fishing vessels from which high quality, self-reported data on fishing effort, area fished, gear characteristics, catch,...

  1. NONLINEAR DYNAMICAL SYSTEMS - Final report

    Energy Technology Data Exchange (ETDEWEB)

    Philip Holmes

    2005-12-31

    This document is the final report on the work completed on DE-FG02-95ER25238 since the start of the second renewal period: Jan 1, 2001. It supplements the annual reports submitted in 2001 and 2002. In the renewal proposal I envisaged work in three main areas: Analytical and topological tools for studying flows and maps Low dimensional models of fluid flow Models of animal locomotion and I describe the progess made on each project.

  2. CDC Wonder Vaccine Adverse Event Reporting System

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Vaccine Adverse Event Reporting System (VAERS) online database on CDC WONDER provides counts and percentages of adverse event case reports after vaccination,...

  3. Medicares Physician Quality Reporting System (PQRS)...

    Data.gov (United States)

    U.S. Department of Health & Human Services — Medicares Physician Quality Reporting System (PQRS) allows providers to report measures of process quality and health outcomes. The authors of Medicares Physician...

  4. SYSTEMIC LUPUS ERYTHEMATOSUS : CASE REPORT

    Directory of Open Access Journals (Sweden)

    Ida Ayu Tri Wedari

    2014-02-01

    Full Text Available Systemic lupus erythematosus (systemic lupus erythematosus, SLE, an autoimmune disease characterized by the production of antibodies against components of the cellnucleus that is associated with a broad clinical manifestations. Ninety percent of casesof systemic lupus erythematosus attacking a young woman with a peak incidence at 1540yearsofageduringthereproductiveperiodwiththeratioofwomenandmen5:1.Itsetiologyis unclear, allegedly associated with a specific immune response genes in themajor histocompatibility complex class II, HLA-DR2 and HLA DR3. Clinicalmanifestations which appear heterogeneous and involve almost all organ systems of thecondition of the joints and skin of patients with mild to severe disease that attacks thecentral nervous system, lungs, gastrointestinal tract, and kidneys. Treatment is mainlyaimed at controlling the symptoms of the acute attack and suppress symptoms andweight at a level that can be tolerated and prevent organ damage.

  5. Expert systems for clinical pathology reporting.

    Science.gov (United States)

    Edwards, Glenn A

    2008-08-01

    * Conventional automated interpretative reporting systems use standard or "canned" comments for patient reports. These are result-specific and do not generally refer to the patient context. * Laboratory information systems (LIS) are limited in their application of patient-specific content of reporting. * Patient-specific interpretation requires extensive cross-referencing to other information contained in the LIS such as previous test results, other related tests, and clinical notes, both current and previous. * Expert systems have the potential to improve reporting quality by enabling patient-specific reporting in clinical laboratories.

  6. Measurement System and Calibration report

    DEFF Research Database (Denmark)

    Vesth, Allan; Kock, Carsten Weber

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...

  7. Preoperational test report, primary ventilation system

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, F.T.

    1997-11-04

    This represents a preoperational test report for Primary Ventilation Systems, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The system provides vapor space filtered venting of tanks AY101, AY102, AZ101, AZ102. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System.

  8. Preoperational test report, vent building ventilation system

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, F.T.

    1997-11-04

    This represents a preoperational test report for Vent Building Ventilation Systems, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The system provides Heating, Ventilation, and Air Conditioning (HVAC) for the W-030 Ventilation Building. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System.

  9. System Analysis Department. Annual Report 2002

    Energy Technology Data Exchange (ETDEWEB)

    Duijm, N.J.; Jensen, E.; Larsen, H.; Skipper, S. (eds.)

    2002-04-01

    This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 2001. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and lists of publications, committees and staff members. (au)

  10. Systems Analysis Department. Annual Report 2000

    Energy Technology Data Exchange (ETDEWEB)

    Duijm, N.J.; Jensen, E.; Larsen, H.; Olsson, C.

    2001-05-01

    This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 2000. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and lists of publications, committees and staff members. (au)

  11. Systems Analysis department. Annual progress report 1997

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Olsson, Charlotte; Petersen, Kurt E.

    1998-03-01

    The report describes the work of the Systems Analysis Department at Risoe National Laboratory during 1997. The department is undertaking research within Energy systems Analysis, Integrated Energy, Environment and Development Planning - UNEP Centre, Industrial Safety and Reliability and Man/Machine Interaction. The report includes lists of publications lectures, committees and staff members. (au) 110 refs.

  12. Systems Analysis Department. Annual Report 2003

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, H.; Olsson, C. (eds.)

    2004-04-01

    This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 2003. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and list of staff members. (au)

  13. Energy Systems Group. Annual Progress Report 1984

    DEFF Research Database (Denmark)

    Grohnheit, Poul Erik; Larsen, Hans Hvidtfeldt; Villadsen, B.

    The report describes the work of the Energy Systems Group at Risø National Laboratory during 1984. The activities may be roughly classified as development and use of energy-economy models, energy systems analysis, energy technology assessment and energy planning. The report includes a list of staff...

  14. Systems Analysis Department. Annual progress report 1996

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, H.; Olsson, C.; Petersen, K.E. [eds.

    1997-03-01

    The report describes the work of the Systems Analysis Department at Risoe National Laboratory during 1996. The department is undertaking research within Simulation and Optimisation of Energy Systems, Energy and Environment in Developing Countries - UNEP Centre, Integrated Environmental and Risk Management and Man/Machine Interaction. The report includes lists of publications, lectures, committees and staff members. (au) 131 refs.

  15. Systems Analysis Department annual progress report 1998

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Olsson, Charlotte; Loevborg, Leif [eds.

    1999-03-01

    The report describes the work of the Systems Analysis Department at Risoe National Laboratory during 1998. The department undertakes research within Energy Systems Analysis, Integrated Energy, Environment and Development Planning - UNEP Centre, Industrial Safety and Reliability, Man/Machine Interaction and Technology Scenarios. The report includes lists of publications, lectures, committees and staff members. (au) 111 refs.

  16. Systems Analysis Department. Annual Report 2001

    Energy Technology Data Exchange (ETDEWEB)

    Duijm, N.J.; Jensen, E.; Larsen, H.; Skipper, S. (eds.)

    2002-04-01

    This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 2001. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and lists of publications, committees and staff members. (au)

  17. Systems Analysis Department. Annual Progress Report 1999

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Olsson, Charlotte; Loevborg, Leif [eds.

    2000-03-01

    This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 1999. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning-UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and lists of publications, committees and staff members. (au)

  18. Systems Analysis Department annual report 2001

    DEFF Research Database (Denmark)

    2002-01-01

    This report describes the work of the Systems Analysis Department at Risø National Laboratory during 2001. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety,Reliability and Human Factors, and Technology...... Scenarios. The report includes summary statistics and lists of publications, committees and staff members....

  19. Systems Analysis Department annual report 2000

    DEFF Research Database (Denmark)

    2001-01-01

    This report describes the work of the Systems Analysis Department at Risø National Laboratory during 2000. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety,Reliability and Human Factors, and Technology...... Scenarios. The report includes summary statistics and lists of publications, committees and staff members....

  20. Systems Analysis Department annual report 2002

    DEFF Research Database (Denmark)

    2003-01-01

    This report describes the work of the Systems Analysis Department at Risø National Laboratory during 2002. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning – UNEP Centre, Safety,Reliability and Human Factors, and Technology...... Scenarios. The report includes summary statistics and lists of publications, committees and staff members....

  1. Medication incidents reported to an online incident reporting system.

    LENUS (Irish Health Repository)

    Alrwisan, Adel

    2011-01-15

    AIMS: Approximately 20% of deaths from adverse events are related to medication incidents, costing the NHS an additional £500 million annually. Less than 5% of adverse events are reported. This study aims to assess the reporting rate of medication incidents in NHS facilities in the north east of Scotland, and to describe the types and outcomes of reported incidents among different services. Furthermore, we wished to quantify the proportion of reported incidents according to the reporters\\' profession. METHODS: A retrospective description was made of medication incidents reported to an online reporting system (DATIX) over a 46-month-period (July 2005 to April 2009). Reports originated from acute and community hospitals, mental health, and primary care facilities. RESULTS: Over the study period there were 2,666 incidents reported with a mean monthly reporting rate of 78.2\\/month (SD±16.9). 6.1% of all incidents resulted in harm, with insulin being the most commonly implicated medication. Nearly three-quarters (74.2%, n=1,978) of total incidents originated from acute hospitals. Administration incidents were implicated in the majority of the reported medication incidents (59%), followed by prescribing (10.8%) and dispensing (9.9%), while the nondescript "other medication incidents" accounted for 20.3% of total incidents. The majority of reports were made by nursing and midwifery staff (80%), with medical and dental professionals reporting the lowest number of incidents (n=56, 2%). CONCLUSIONS: The majority of medication incidents in this study were reported by nursing and midwifery staff, and were due to administration incidents. There is a clear need to elucidate the reasons for the limited contribution of the medical and dental professionals to reporting medication incidents.

  2. A multi-sample based method for identifying common CNVs in normal human genomic structure using high-resolution aCGH data.

    Directory of Open Access Journals (Sweden)

    Chihyun Park

    Full Text Available BACKGROUND: It is difficult to identify copy number variations (CNV in normal human genomic data due to noise and non-linear relationships between different genomic regions and signal intensity. A high-resolution array comparative genomic hybridization (aCGH containing 42 million probes, which is very large compared to previous arrays, was recently published. Most existing CNV detection algorithms do not work well because of noise associated with the large amount of input data and because most of the current methods were not designed to analyze normal human samples. Normal human genome analysis often requires a joint approach across multiple samples. However, the majority of existing methods can only identify CNVs from a single sample. METHODOLOGY AND PRINCIPAL FINDINGS: We developed a multi-sample-based genomic variations detector (MGVD that uses segmentation to identify common breakpoints across multiple samples and a k-means-based clustering strategy. Unlike previous methods, MGVD simultaneously considers multiple samples with different genomic intensities and identifies CNVs and CNV zones (CNVZs; CNVZ is a more precise measure of the location of a genomic variant than the CNV region (CNVR. CONCLUSIONS AND SIGNIFICANCE: We designed a specialized algorithm to detect common CNVs from extremely high-resolution multi-sample aCGH data. MGVD showed high sensitivity and a low false discovery rate for a simulated data set, and outperformed most current methods when real, high-resolution HapMap datasets were analyzed. MGVD also had the fastest runtime compared to the other algorithms evaluated when actual, high-resolution aCGH data were analyzed. The CNVZs identified by MGVD can be used in association studies for revealing relationships between phenotypes and genomic aberrations. Our algorithm was developed with standard C++ and is available in Linux and MS Windows format in the STL library. It is freely available at: http://embio.yonsei.ac.kr/~Park/mgvd.php.

  3. A simple device to convert a small-animal PET scanner into a multi-sample tissue and injection syringe counter.

    Science.gov (United States)

    Green, Michael V; Seidel, Jurgen; Choyke, Peter L; Jagoda, Elaine M

    2017-10-01

    We describe a simple fixture that can be added to the imaging bed of a small-animal PET scanner that allows for automated counting of multiple organ or tissue samples from mouse-sized animals and counting of injection syringes prior to administration of the radiotracer. The combination of imaging and counting capabilities in the same machine offers advantages in certain experimental settings. A polyethylene block of plastic, sculpted to mate with the animal imaging bed of a small-animal PET scanner, is machined to receive twelve 5-ml containers, each capable of holding an entire organ from a mouse-sized animal. In addition, a triangular cross-section slot is machined down the centerline of the block to secure injection syringes from 1-ml to 3-ml in size. The sample holder is scanned in PET whole-body mode to image all samples or in one bed position to image a filled injection syringe. Total radioactivity in each sample or syringe is determined from the reconstructed images of these objects using volume re-projection of the coronal images and a single region-of-interest for each. We tested the accuracy of this method by comparing PET estimates of sample and syringe activity with well counter and dose calibrator estimates of these same activities. PET and well counting of the same samples gave near identical results (in MBq, R(2)=0.99, slope=0.99, intercept=0.00-MBq). PET syringe and dose calibrator measurements of syringe activity in MBq were also similar (R(2)=0.99, slope=0.99, intercept=- 0.22-MBq). A small-animal PET scanner can be easily converted into a multi-sample and syringe counting device by the addition of a sample block constructed for that purpose. This capability, combined with live animal imaging, can improve efficiency and flexibility in certain experimental settings. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Pamela tracking system status report

    CERN Document Server

    Taccetti, F; Bonechi, L; Bongi, M; Boscherini, M; Castellini, G; D'Alessandro, R; Gabbanini, A; Grandi, M; Papini, P; Piccardi, S; Ricciarini, S; Spillantini, P; Straulino, S; Tesi, M; Vannuccini, E

    2002-01-01

    The Pamela apparatus will be launched at the end of 2002 on board of the Resurs DK Russian satellite. The tracking system, composed of six planes of silicon sensors inserted inside a permanent magnetic field was intensively tested during these last years. Results of tests have shown a good signal-to-noise ratio and an excellent spatial resolution, which should allow to measure the antiproton flux in an energy range from 80 MeV up to 190 GeV. The production of the final detector modules is about to start and mechanical and thermal tests on the tracking tower are being performed according to the specifications of the Russian launcher and satellite.

  5. Army Energy and Water Reporting System Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Deprez, Peggy C.; Giardinelli, Michael J.; Burke, John S.; Connell, Linda M.

    2011-09-01

    There are many areas of desired improvement for the Army Energy and Water Reporting System. The purpose of system is to serve as a data repository for collecting information from energy managers, which is then compiled into an annual energy report. This document summarizes reported shortcomings of the system and provides several alternative approaches for improving application usability and adding functionality. The U.S. Army has been using Army Energy and Water Reporting System (AEWRS) for many years to collect and compile energy data from installations for facilitating compliance with Federal and Department of Defense energy management program reporting requirements. In this analysis, staff from Pacific Northwest National Laboratory found that substantial opportunities exist to expand AEWRS functions to better assist the Army to effectively manage energy programs. Army leadership must decide if it wants to invest in expanding AEWRS capabilities as a web-based, enterprise-wide tool for improving the Army Energy and Water Management Program or simply maintaining a bottom-up reporting tool. This report looks at both improving system functionality from an operational perspective and increasing user-friendliness, but also as a tool for potential improvements to increase program effectiveness. The authors of this report recommend focusing on making the system easier for energy managers to input accurate data as the top priority for improving AEWRS. The next major focus of improvement would be improved reporting. The AEWRS user interface is dated and not user friendly, and a new system is recommended. While there are relatively minor improvements that could be made to the existing system to make it easier to use, significant improvements will be achieved with a user-friendly interface, new architecture, and a design that permits scalability and reliability. An expanded data set would naturally have need of additional requirements gathering and a focus on integrating

  6. National Violent Death Reporting System (NVDRS)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Violent Death Reporting System (NVDRS) provides states and communities with a clearer understanding of violent deaths to guide local decisions about...

  7. Grants Reporting and Tracking System (GRTS)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Grants Reporting and Tracking System (GRTS) is the primary tool for management and oversight of EPA's Nonpoint Source (NPS) Pollution Control Program. GRTS pulls...

  8. ISDSN Sensor System Phase One Test Report

    Energy Technology Data Exchange (ETDEWEB)

    Gail Heath

    2011-09-01

    This Phase 1 Test Report documents the test activities and results completed for the Idaho National Laboratory (INL) sensor systems that will be deployed in the meso-scale test bed (MSTB) at Florida International University (FIU), as outlined in the ISDSN-MSTB Test Plan. This report captures the sensor system configuration tested; test parameters, testing procedure, any noted changes from the implementation plan, acquired test data sets, and processed results.

  9. Argument for a Joint Safety Reporting System

    Science.gov (United States)

    2015-02-13

    Audits (LOSA), Organizational Safety Assessment ( OSA ), Air Force Combined Mishap Reduction System (AFCMRS), Fatigue Avoidance Scheduling Tool (FAST...Report; and AF IMT 711D, Nuclear Mishap/Incident Report; (accessed 27 November 2014); Air Force e- Publishing website, http://www.e-publishing.af.mil

  10. The Retinal Readout System: a status report A Status Report

    CERN Document Server

    Litke, A M

    1999-01-01

    The 'Retinal Readout System' is being developed to study the language the eye uses to send information about the visual world to the brain. Its architecture is based on that of silicon microstrip detectors. An array of 512 microscopic electrodes picks up the signals generated by the output neurons of live retinal tissue in response to a dynamic image focused on the input neurons. These signals are amplified, filtered and multiplexed by a set of eight custom-designed VLSI readout chips, and digitized and recorded by a data acquisition system. This report describes the goals, design, and status of the system. (author)

  11. Molecular Imaging with Activatable Reporter Systems

    Directory of Open Access Journals (Sweden)

    Gang Niu, Xiaoyuan Chen

    2012-01-01

    Full Text Available Molecular imaging is a newly emerged multiple disciplinary field that aims to visualize, characterize and quantitatively measure biological processes at cellular and molecular levels in humans and other living systems. A reporter gene is a piece of DNA encoding reporter protein, which presents as a readily measurable phenotype that can be distinguished easily from the background of endogenous protein. After being transferred into cells of organ systems (transgenes, the reporter gene can be utilized to visualize transcriptional and posttranscriptional regulation of gene expression, protein-protein interactions, or trafficking of proteins or cells in living subjects. Herein, we review previous classification of reporter genes and regroup the reporter gene based imaging as basic, inducible and activatable, based on the regulation of reporter gene transcription and post-translational modification of reporter proteins. We then focus on activatable reporters, in which the signal can be activated at the posttranslational level for visualizing protein-protein interactions, protein phosphorylation or tertiary structure changes. The applications of several types of activatable reporters will also be summarized. We conclude that activatable reporter imaging can benefit both basic biomedical research and drug development.

  12. 1998 FFTF annual system assessment reports

    Energy Technology Data Exchange (ETDEWEB)

    Guttenberg, S.

    1998-03-19

    The health of FFTF systems was assessed assuming a continued facility standby condition. The review was accomplished in accordance with the guidelines of FFTF-EI-083, Plant Evaluation Program. The attached document includes an executive summary of the significant conclusions and assessment reports for each system evaluated.

  13. Problem reporting management system performance simulation

    Science.gov (United States)

    Vannatta, David S.

    1993-01-01

    This paper proposes the Problem Reporting Management System (PRMS) model as an effective discrete simulation tool that determines the risks involved during the development phase of a Trouble Tracking Reporting Data Base replacement system. The model considers the type of equipment and networks which will be used in the replacement system as well as varying user loads, size of the database, and expected operational availability. The paper discusses the dynamics, stability, and application of the PRMS and addresses suggested concepts to enhance the service performance and enrich them.

  14. Preoperational test report, recirculation ventilation systems

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, F.T.

    1997-11-11

    This represents a preoperational test report for Recirculation Ventilation Systems, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The system provides vapor space cooling of tanks AY1O1, AY102, AZ1O1, AZ102 and supports the ability to exhaust air from each tank. Each system consists of a valved piping loop, a fan, condenser, and moisture separator; equipment is located inside each respective tank farm in its own hardened building. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System.

  15. Class 3 Tracking and Monitoring System Report

    Energy Technology Data Exchange (ETDEWEB)

    Safely, Eugene; Salamy, S. Phillip

    1999-11-29

    The objective of Class 3 tracking system are to assist DOE in tracking and performance and progress of these projects and to capture the technical and financial information collected during the projects' monitoring phase. The captured information was used by DOE project managers and BDM-Oklahoma staff for project monitoring and evaluation, and technology transfer activities. The proposed tracking system used the Class Evaluation Executive Report (CLEVER), a relation database for storing and disseminating class project data; GeoGraphix, a geological and technical analysis and mapping software system; the Tertiary Oil Recovery Information System (TORIS) database; and MS-Project, a project management software system.

  16. Electronic Resources Management System: Recommendation Report 2017

    KAUST Repository

    Ramli, Rindra M.

    2017-05-01

    This recommendation report provides an overview of the selection process for the new Electronic Resources Management System. The library has decided to move away from Innovative Interfaces Millennium ERM module. The library reviewed 3 system as potential replacements namely: Proquest 360 Resource Manager, Ex Libris Alma and Open Source CORAL ERMS. After comparing and trialling the systems, it was decided to go for Proquest 360 Resource Manager.

  17. Changing Social and Environmental Reporting Systems

    DEFF Research Database (Denmark)

    Kaspersen, Mia; Riise Johansen, Thomas

    2016-01-01

    Based on a case study of a large multinational group, this paper addresses the way in which social and environmental reporting (SER) systems were changed and the consequences and controversies associated with this change. Drawing on Power's work on the processes by which things are made auditable...... via underlying systems, we focus on how and why a specific programme with auditability as its ultimate aim changed the basis on which the external social and environmental report was prepared. Our analysis demonstrates that the perceived alignment with the financial report preparation and the explicit...... pursuit of auditability legitimized SER and paved the way for data systems to be changed. The programme borrowed authority from financial accounting technologies not only to make a system change but also to push SER internally, as we suggest that an intraorganizational group used the programme to ensure...

  18. Energy Innovation Systems Indicator Report 2016

    DEFF Research Database (Denmark)

    Borup, Mads; Klitkou, Antje; Iversen, Eric

    This report collates a set of indicators, figures and tables for the energy innovation system in Denmark. Emphasis is on renewable energy and other technologies for moving towards sustainability. The purpose is to provide an overview of indicators available for illuminating dynamics...... and characteristics of energy innovation systems and to the extent possible offer figures of the developments in the individual indicators. The report is an update of a report published in 2012. Graphs and numbers are updated with the most recent data available. The text is updated where needed in connection...... to the individual indicators as well as in the general remarks and conclusions. A limited number of new indicators and measurements are included. In addition, the accounts are in a few cases changed due to changes in data availability or in measurement methods. The report is produced as part of the activities...

  19. Preoperational test report, raw water system

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, F.T.

    1997-10-29

    This represents the preoperational test report for the Raw Water System, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The system supplies makeup water to the W-030 recirculation evaporative cooling towers for tanks AY1O1, AY102, AZ1O1, AZ102. The Raw Water pipe riser and associated strainer and valving is located in the W-030 diesel generator building. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System.

  20. A suspended-particle rosette multi-sampler for discrete biogeochemical sampling in low-particle-density waters

    Energy Technology Data Exchange (ETDEWEB)

    Breier, J. A.; Rauch, C. G.; McCartney, K.; Toner, B. M.; Fakra, S. C.; White, S. N.; German, C. R.

    2010-06-22

    To enable detailed investigations of early stage hydrothermal plume formation and abiotic and biotic plume processes we developed a new oceanographic tool. The Suspended Particulate Rosette sampling system has been designed to collect geochemical and microbial samples from the rising portion of deep-sea hydrothermal plumes. It can be deployed on a remotely operated vehicle for sampling rising plumes, on a wire-deployed water rosette for spatially discrete sampling of non-buoyant hydrothermal plumes, or on a fixed mooring in a hydrothermal vent field for time series sampling. It has performed successfully during both its first mooring deployment at the East Pacific Rise and its first remotely-operated vehicle deployments along the Mid-Atlantic Ridge. It is currently capable of rapidly filtering 24 discrete large-water-volume samples (30-100 L per sample) for suspended particles during a single deployment (e.g. >90 L per sample at 4-7 L per minute through 1 {mu}m pore diameter polycarbonate filters). The Suspended Particulate Rosette sampler has been designed with a long-term goal of seafloor observatory deployments, where it can be used to collect samples in response to tectonic or other events. It is compatible with in situ optical sensors, such as laser Raman or visible reflectance spectroscopy systems, enabling in situ particle analysis immediately after sample collection and before the particles alter or degrade.

  1. Analysis of Hybrid Hydrogen Systems: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Dean, J.; Braun, R.; Munoz, D.; Penev, M.; Kinchin, C.

    2010-01-01

    Report on biomass pathways for hydrogen production and how they can be hybridized to support renewable electricity generation. Two hybrid systems were studied in detail for process feasibility and economic performance. The best-performing system was estimated to produce hydrogen at costs ($1.67/kg) within Department of Energy targets ($2.10/kg) for central biomass-derived hydrogen production while also providing value-added energy services to the electric grid.

  2. The structure of PTSD symptoms according to DSM-5 and IDC-11 proposal: A multi-sample analysis.

    Science.gov (United States)

    Cyniak-Cieciura, M; Staniaszek, K; Popiel, A; Pragłowska, E; Zawadzki, B

    2017-07-01

    Posttraumatic stress disorder (PTSD) symptoms structure is a subject of ongoing debate since its inclusion in DSM-III classification in 1980. Different research on PTSD symptoms structure proved the better fit of four-factor and five-factor models comparing to the one proposed by DSM-IV. With the publication of DSM-5 classification, which introduced significant changes to PTSD diagnosis, the question arises about the adequacy of the proposed criteria to the real structure of disorder symptoms. Recent analyses suggest that seven-factor hybrid model is the best reflection of symptoms structure proposed to date. At the same time, some researchers and ICD-11 classification postulate a simplification of PTSD diagnosis restricting it to only three core criteria and adding additional diagnostic unit of complex-PTSD. This research aimed at checking symptoms' structure according to well-known and supported four-, five-, six- and seven-factor models based on DSM-5 symptoms and the conceptualization proposed by the ICD-11 as well as examining the relation between PTSD symptoms categories with borderline personality disorder. Four different trauma populations were examined with self-reported Posttraumatic Diagnostic Scale for DSM-5 (PDS-5) measure. The results suggest that six- and seven-factor hybrid model as well as three-factor ICD-11 concept fits the data better than other models. The core PTSD symptoms were less related to borderline personality disorder than other, broader, symptoms categories only in one sample. Combination of ICD-11 simplified PTSD diagnosis with the more complex approach (e.g. basing on a seven-factor model) may be an attractive proposal for both scientists and practitioners, however does not necessarily lower its comorbidity with borderline personality disorder. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  3. Japanese Learning Support Systems: Hinoki Project Report

    Directory of Open Access Journals (Sweden)

    Bor HODOŠČEK

    2012-12-01

    Full Text Available In this report, we introduce the Hinoki project, which set out to develop web-based Computer-Assisted Language Learning (CALL systems for Japanese language learners more than a decade ago. Utilizing Natural Language Processing technologies and other linguistic resources, the project has come to encompass three systems, two corpora and many other resources. Beginning with the reading assistance system Asunaro, we describe the construction of Asunaro's multilingual dictionary and it's dependency grammar-based approach to reading assistance. The second system, Natsume, is a writing assistance system that uses large-scale corpora to provide an easy to use collocation search feature that is interesting for it's inclusion of the concept of genre. The final system, Nutmeg, is an extension of Natsume and the Natane learner corpus. It provides automatic correction of learners errors in compositions by using Natsume for its large corpus and genre-aware collocation data and Natane for its data on learner errors.

  4. Study of $\\boldsymbol{(\\alpha,p)}$ and $\\boldsymbol{(\\alpha,n)}$ reactions with a Multi-Sampling Ionization Chamber

    CERN Document Server

    Avila, M L; Almaraz-Calderon, S; Ayangeakaa, A D; Dickerson, C; Hoffman, C R; Jiang, C L; Kay, B P; Lai, J; Nusair, O; Pardo, R C; Santiago-Gonzalez, D; Talwar, R; Ugalde, C

    2016-01-01

    A large number of $(\\alpha,p)$ and $(\\alpha,n)$ reactions are known to play a fundamental role in nuclear astrophysics. This work presents a novel technique to study these reactions with the active target system MUSIC whose segmented anode allows the investigation of a large energy range of the excitation function with a single beam energy. In order to verify the method, we performed a direct measurements of the previously measured reactions $^{17}$O$(\\alpha,n)^{20}$Ne, $^{23}$Na$(\\alpha,p)^{26}$Mg, and $^{23}$Na$(\\alpha,n)^{26}$Al. These reactions were investigated in inverse kinematics using $^{4}$He gas in the detector to study the excitation function in the range of about 2 to 6 MeV in the center of mass. We found good agreement between the cross sections of the $^{17}$O$(\\alpha,n)^{20}$Ne reaction measured in this work and previous measurements. Furthermore we have successfully performed a simultaneous measurement of the $^{23}$Na$(\\alpha,p)^{26}$Mg and $^{23}$Na$(\\alpha,n)^{26}$Al reactions.

  5. Isolated systems with wind power. Main report

    Energy Technology Data Exchange (ETDEWEB)

    Lundsager, P.; Bindner, H.; Clausen, N.E.; Frandsen, S.; Hansen, L.H.; Hansen, J.C.

    2001-06-01

    The overall objective of this research project is to study the development of methods and guidelines rather than 'universal solutions' for the use of wind energy in isolated communities. The main specific objective of the project is to develop and present a more unified and generally applicable approach for assessing the technical and economical feasibility of isolated power supply systems with wind energy. As a part of the project the following tasks were carried out: Review of literature, field measurements in Egypt, development of an inventory of small isolated systems, overview of end-user demands, analysis of findings and development of proposed guidelines. The project is reported in one main report and four topical reports, all of them issued as Risoe reports. This is the Main Report Risoe-R-1256, summing up the activities and findings of the project and outlining an Implementation Strategy for Isolated Systems with Wind Power, applicable for international organisations such as donor agencies and development banks. (au)

  6. Retained gas sampler system acceptance test report

    Energy Technology Data Exchange (ETDEWEB)

    Cannon, N.S., Westinghouse Hanford

    1996-07-18

    Acceptance test results for the Retained Gas Sampler System (RGSS) obtained in the 306E laboratory are reported. The RGSS will be utilized to retrieve and analyze samples from the Hanford flammable gas watch-list tanks to determine the quantity and chemistry of gases confined within the waste.

  7. Railcar waste transfer system hydrostatic test report

    Energy Technology Data Exchange (ETDEWEB)

    Ellingson, S.D.

    1997-04-03

    This Acceptance Test Report (ATR) documents for record purposes the field results, acceptance, and approvals of the completed acceptance test per HNF-SD-W417-ATP-001, ''Rail car Waste Transfer System Hydrostatic Test''. The test was completed and approved without any problems or exceptions.

  8. Preliminary design review report - sludge offload system

    Energy Technology Data Exchange (ETDEWEB)

    Mcwethy, L.M. Westinghouse Hanford

    1996-06-05

    This report documents the conceptual design review of the sludge offload system for the Spent Nuclear Fuel Project. The design description, drawings, available analysis, and safety analysis were reviewed by a peer group. The design review comments and resolutions are documented.

  9. The Message Reporting System in the ATLAS DAQ System

    Science.gov (United States)

    Caprini, M.; Fedorko, I.; Kolos, S.

    2008-06-01

    The Message Reporting System (MRS) in the ATLAS data acquisition system (DAQ) is one package of the Online Software which acts as a glue of various elements of DAQ, High Level Trigger (HLT) and Detector Control System (DCS). The aim of the MRS is to provide a facility which allows all software components in ATLAS to report messages to other components of the distributed DAQ system. The processes requiring a MRS are on one hand applications that report error conditions or information and on the other hand message processors that receive reported messages. A message reporting application can inject one or more messages into the MRS at any time. An application wishing to receive messages can subscribe to a message group according to defined criteria. The application receives messages that fulfill the subscription criteria when they are reported to MRS. The receiver message processing can consist of anything from simply logging the messages in a file/terminal to performing message analysis. The inter-process communication is achieved using the CORBA technology. The design, architecture and the used technology of MRS are reviewed in this paper.

  10. The Message Reporting System of the ATLAS DAQ System

    CERN Document Server

    Caprini, M; Kolos, S; 10th ICATPP Conference on Astroparticle, Particle, Space Physics, Detectors and Medical Physics Applications

    2008-01-01

    The Message Reporting System (MRS) in the ATLAS data acquisition system (DAQ) is one package of the Online Software which acts as a glue of various elements of DAQ, High Level Trigger (HLT) and Detector Control System (DCS). The aim of the MRS is to provide a facility which allows all software components in ATLAS to report messages to other components of the distributed DAQ system. The processes requiring a MRS are on one hand applications that report error conditions or information and on the other hand message processors that receive reported messages. A message reporting application can inject one or more messages into the MRS at any time. An application wishing to receive messages can subscribe to a message group according to defined criteria. The application receives messages that fulfill the subscription criteria when they are reported to MRS. The receiver message processing can consist of anything from simply logging the messages in a file/terminal to performing message analysis. The inter-process comm...

  11. Preoperational test report, recirculation condenser cooling systems

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, F.T.

    1997-11-04

    This represents a preoperational test report for Recirculation Condenser Systems, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The four system provide condenser cooling water for vapor space cooling of tanks AY1O1, AY102, AZ1O1, AZ102. Each system consists of a valved piping loop, a pair of redundant recirculation pumps, a closed-loop evaporative cooling tower, and supporting instrumentation; equipment is located outside the farm on concrete slabs. Piping is routed to the each ventilation condenser inside the farm via below-grade concrete trenches. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System.

  12. Preoperational test report, recirculation condenser cooling systems

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, F.T.

    1997-11-04

    This represents a preoperational test report for Recirculation Condenser Systems, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The four system provide condenser cooling water for vapor space cooling of tanks AY1O1, AY102, AZ1O1, AZ102. Each system consists of a valved piping loop, a pair of redundant recirculation pumps, a closed-loop evaporative cooling tower, and supporting instrumentation; equipment is located outside the farm on concrete slabs. Piping is routed to the each ventilation condenser inside the farm via below-grade concrete trenches. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System.

  13. Infantile Systemic Hyalinosis: A Case Report

    Directory of Open Access Journals (Sweden)

    Özge Gündüz

    2009-09-01

    Full Text Available Infantile systemic hyalinosis (ISH is an autosomal recessive, rare disorder in which hyaline deposition occurs in multiple organ systems, including the skin. It is characterised by painful joint contractures, gingival hypertrophy, generalized osteopenia, small pearly papules on the head, flesh nodules in the perianal region, and usually thickened skin. The onset occurs within the first few weeks of life and death occurs by two years of age as a result of recurrent pulmonary infections and diarrhea. Unfortunately, treatment is primarily palliative as there is no cure currently available. Herein, we report an 8-month-old boy who is diagnosed with ISH with the characteristic clinical presentation and histopathological findings.

  14. Grants Reporting and Tracking System (GRTS)

    Science.gov (United States)

    The Grants Reporting and Tracking System (GRTS) is the primary tool for management and oversight of EPA's Nonpoint Source (NPS) Pollution Control Program. GRTS pulls grant information from EPA's centralized grants and financial databases and allows grant recipients to enter detailed information on the individual projects or activities funded under each grant. To browse these records, click on Project Records in the left-hand menu.

  15. Residual energy applications program systems analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Yngve, P.W.

    1980-10-01

    Current DOE plans call for building an Energy Applied Systems Test (EAST) Facility at the Savannah River Plant in close proximity to the 140 to 150/sup 0/F waste heat from one of several operating nuclear reactors. The waste water flow from each reactor, approximately 165,000 gpm, provides a unique opportunity to test the performance and operating characteristics of large-scale waste heat power generation and heat pump system concepts. This report provides a preliminary description of the potential end-use market, parametric data on heat pump and the power generation system technology, a preliminary listing of EAST Facility requirements, and an example of an integrated industrial park utilizing the technology to maximize economic pay back. The parametric heat pump analysis concluded that dual-fluid Rankine cycle heat pumps with capacities as high as 400 x 10/sup 6/ Btu/h, can utilize large sources of low temperature residual heat to provide 300/sup 0/F saturatd steam for an industrial park. The before tax return on investment for this concept is 36.2%. The analysis also concluded that smaller modular heat pumps could fulfill the same objective while sacrificing only a moderate rate of return. The parametric power generation analysis concluded that multi-pressure Rankine cycle systems not only are superior to single pressure systems, but can also be developed for large systems (approx. = 17 MW/sub e/). This same technology is applicable to smaller systems at the sacrifice of higher investment per unit output.

  16. CNGS layout and systems: a progress report

    CERN Document Server

    Bruno, L; Elsener, K; Gaillard, H; López-Hernandez, L A; Maugain, J M; Meddahi, M; Rangod, Stephane; Spinks, Alan; Stevenson, G R; Wilhelmsson, M; CERN. Geneva. AB Department

    2003-01-01

    The CNGS (CERN Neutrino beam to Gran Sasso) project was described in a conceptual technical design report in 1998 (the project was then called NGS, cf. report CERN 98-02 / INFN-AE/98-05). An addendum to that report was published in 1999, describing the improvements on the design and performance, in particular in view of the nt appearance experiments to be performed with the CNGS beam (cf. report CERN-SL/99-034(DI) / INFN/AE-99-05). In the time since the publishing of these two reports, the CNGS project was approved by CERN Council and construction work started in September 2000. A further note (SL-Note-2002-012) - written on the occasion of the first CNGS External Review in February 2002 - provided an update concerning changes to the overall layout of the CNGS facility. The present paper describes further layout changes and the modifications to the design of various systems and equipment. This work has been done in preparation of the second CNGS Review, held in April 2003.

  17. Final Report: Hydrogen Storage System Cost Analysis

    Energy Technology Data Exchange (ETDEWEB)

    James, Brian David [Strategic Analysis Inc., Arlington, VA (United States); Houchins, Cassidy [Strategic Analysis Inc., Arlington, VA (United States); Huya-Kouadio, Jennie Moton [Strategic Analysis Inc., Arlington, VA (United States); DeSantis, Daniel A. [Strategic Analysis Inc., Arlington, VA (United States)

    2016-09-30

    The Fuel Cell Technologies Office (FCTO) has identified hydrogen storage as a key enabling technology for advancing hydrogen and fuel cell power technologies in transportation, stationary, and portable applications. Consequently, FCTO has established targets to chart the progress of developing and demonstrating viable hydrogen storage technologies for transportation and stationary applications. This cost assessment project supports the overall FCTO goals by identifying the current technology system components, performance levels, and manufacturing/assembly techniques most likely to lead to the lowest system storage cost. Furthermore, the project forecasts the cost of these systems at a variety of annual manufacturing rates to allow comparison to the overall 2017 and “Ultimate” DOE cost targets. The cost breakdown of the system components and manufacturing steps can then be used to guide future research and development (R&D) decisions. The project was led by Strategic Analysis Inc. (SA) and aided by Rajesh Ahluwalia and Thanh Hua from Argonne National Laboratory (ANL) and Lin Simpson at the National Renewable Energy Laboratory (NREL). Since SA coordinated the project activities of all three organizations, this report includes a technical description of all project activity. This report represents a summary of contract activities and findings under SA’s five year contract to the US Department of Energy (Award No. DE-EE0005253) and constitutes the “Final Scientific Report” deliverable. Project publications and presentations are listed in the Appendix.

  18. Sequencing Information Management System (SIMS). Final report

    Energy Technology Data Exchange (ETDEWEB)

    Fields, C.

    1996-02-15

    A feasibility study to develop a requirements analysis and functional specification for a data management system for large-scale DNA sequencing laboratories resulted in a functional specification for a Sequencing Information Management System (SIMS). This document reports the results of this feasibility study, and includes a functional specification for a SIMS relational schema. The SIMS is an integrated information management system that supports data acquisition, management, analysis, and distribution for DNA sequencing laboratories. The SIMS provides ad hoc query access to information on the sequencing process and its results, and partially automates the transfer of data between laboratory instruments, analysis programs, technical personnel, and managers. The SIMS user interfaces are designed for use by laboratory technicians, laboratory managers, and scientists. The SIMS is designed to run in a heterogeneous, multiplatform environment in a client/server mode. The SIMS communicates with external computational and data resources via the internet.

  19. Environmental Systems Research, FY-99 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David Lynn

    2000-01-01

    The Environmental Systems Research (ESR) Program, a part of the Environmental Systems Research and Analysis (ESRA) Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Department of Energy's Office of Environmental Management (EM). The original portfolio of research activities was assembled after an analysis of the EM technology development and science needs as gathered by the Site Technology Coordination Groups (STCGs) complex-wide. Current EM investments in science and technology throughout the research community were also included in this analysis to avoid duplication of efforts. This is a progress report for the second year of the ESR Program (Fiscal Year 99). A report of activities is presented for the five ESR research investment areas: (a) Transport Aspects of Selective Mass Transport Agents, (b) Chemistry of Environmental Surfaces, (c) Materials Dynamics, (d) Characterization Science, and (e) Computational Simulation of Mechanical and Chemical Systems. In addition to the five technical areas, activities in the Science and Technology Foundations element of the program, e.g., interfaces between ESR and the EM Science Program (EMSP) and the EM Focus Areas, are described.

  20. Environmental Systems Research FY-99 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D.L.

    2000-01-01

    The Environmental Systems Research (ESR) Program, a part of the Environmental Systems Research and Analysis (ESRA) Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Department of Energy's Office of Environmental Management (EM). The original portfolio of research activities was assembled after an analysis of the EM technology development and science needs as gathered by the Site Technology Coordination Groups (STCGs) complex-wide. Current EM investments in science and technology throughout the research community were also included in this analysis to avoid duplication of efforts. This is a progress report for the second year of the ESR Program (Fiscal Year 99). A report of activities is presented for the five ESR research investment areas: (a) Transport Aspects of Selective Mass Transport Agents, (b) Chemistry of Environmental Surfaces, (c) Materials Dynamics, (d) Characterization Science, and (e) Computational Simulation of Mechanical and Chemical Systems. In addition to the five technical areas, activities in the Science and Technology Foundations element of the program, e.g., interfaces between ESR and the EM Science Program (EMSP) and the EM Focus Areas, are described.

  1. Systemic lupus erythematosus in pregnancy: Case report

    Directory of Open Access Journals (Sweden)

    Radeka Gordana

    2005-01-01

    Full Text Available Systemic lupus erythematosus (SLE is a chronic inflammatory connective tissue disease commonly diagnosed after the age of 20, mostly around the age of 30 years. It is more common in women than in men, especially during the fertile period. Women with SLE are at higher risk for spontaneous abortions, intrauterine fetal death, preeclampsia and eclampsia, preterm delivery and intrauterine growth retardation. This paper is a case report of a pregnant woman with SLE complicated with preeclampsia, but it also discusses follow-up of such pregnancies.

  2. Pentek concrete scabbling system: Baseline report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-31

    The Pentek scabbling technology was tested at Florida International University (FIU) and is being evaluated as a baseline technology. This report evaluates it for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek concrete scabbling system consisted of the MOOSE{reg_sign}, SQUIRREL{reg_sign}-I, and SQUIRREL{reg_sign}-III scabblers. The scabblers are designed to scarify concrete floors and slabs using cross-section, tungsten carbide tipped bits. The bits are designed to remove concrete in 318 inch increments. The bits are either 9-tooth or demolition type. The scabblers are used with a vacuum system designed to collect and filter the concrete dust and contamination that is removed from the surface. The safety and health evaluation during the human factors assessment focused on two main areas: noise and dust.

  3. DCE Bio Detection System Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lind, Michael A.; Batishko, Charles R.; Morgen, Gerald P.; Owsley, Stanley L.; Dunham, Glen C.; Warner, Marvin G.; Willett, Jesse A.

    2007-12-01

    The DCE (DNA Capture Element) Bio-Detection System (Biohound) was conceived, designed, built and tested by PNNL under a MIPR for the US Air Force under the technical direction of Dr. Johnathan Kiel and his team at Brooks City Base in San Antonio Texas. The project was directed toward building a measurement device to take advantage of a unique aptamer based assay developed by the Air Force for detecting biological agents. The assay uses narrow band quantum dots fluorophores, high efficiency fluorescence quenchers, magnetic micro-beads beads and selected aptamers to perform high specificity, high sensitivity detection of targeted biological materials in minutes. This final report summarizes and documents the final configuration of the system delivered to the Air Force in December 2008

  4. 44 CFR 208.6 - System resource reports.

    Science.gov (United States)

    2010-10-01

    ... request reports from any System resource relating to its activities as part of the System. (b) Reports to... OF HOMELAND SECURITY DISASTER ASSISTANCE NATIONAL URBAN SEARCH AND RESCUE RESPONSE SYSTEM General...

  5. Demonstrations of electric heating systems. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Haapakoski, M.; Laitila, R.; Ruska, T.

    1998-07-01

    In 1991, Imatran Voima launched the Demonstration Project of Electric Heating Systems. The project investigated in detail the energy consumption, housing comfort and electric power output rates of approximately one hundred electrically heated single-family houses and updated the investment cost information of heating systems. The project implemented and monitored quality electric heating concepts that guarantee a high standard of housing comfort. The targets in the project provided with combinations of floor, ceiling and window heating systems totalled 33. Furthermore, the project included 42 targets provided with water-circulated floor or radiator heating systems and 22 houses that had moved from oil or district heating systems into electric heating. The number of metering years received in the energy consumption measurements totalled 339. During the course of the project, six partial reports, one master's thesis and three summary reports were published. This is the final report of the project. It deals in brief with the major results. The best electric heating concept, in terms of housing comfort, is a floor heating system using cables supplemented by ceiling and window heating. Thanks to the heating units installed in the structures, the operative temperature grows by about one degree in comparison with a corresponding target heated with radiators. A typical, room-specifically-heated 140 m{sup 2} house consumes a total of 24,000 kWh of energy per year. Of this amount, electric space heating accounts for 11,500 kWh, heating with wood for 1,500 kWh, heating of tap water for 4,000 kWh and household electricity for 7,000 kWh. In a house provided with a water-circulated electric heating system the total energy consumption is, owing to the adjustment and storage losses, about 10 % higher. Of the energy consumption in the house, most part takes place during the period of nighttime electricity. The nighttime load in a 24-hour period with very low temperatures

  6. Potassium emission absorption system. Topical report 12

    Energy Technology Data Exchange (ETDEWEB)

    Bauman, L.E.

    1995-04-01

    The Potassium Emission Absorption System is one of the advanced optical diagnostics developed at Mississippi State University to provide support for the demonstration of prototype-scale coal-fired combustion magnetohydrodynamic (MHD) electrical power generation. Intended for application in the upstream of an MHD flow, the system directly measures gas temperature and neutral potassium atom number density through spectroscopic emission absorption techniques. From these measurements the electron density can be inferred from a statistical equilibrium calculation and the electron conductivity in the MHD channel found by use of an electron mobility model. The instrument has been utilized for field test measurements on MHD facilities for almost a decade and has been proven to provide useful measurements as designed for MHD nozzle, channel, and diffuser test sections. The theory of the measurements, a system description, its capabilities, and field test measurement results are reported here. During the development and application of the instrument several technical issues arose which when addressed advanced the state of the art in emission absorption measurement. Studies of these issues are also reported here and include: two-wavelength measurements for particle-laden flows, potassium D-line far wing absorption coefficient, bias in emission absorption measurements arising from dirty windows and misalignments, non-coincident multiwavelength emission absorption sampling errors, and lineshape fitting for boundary layer flow profile information. Although developed for NLHD application, the instrument could be applied to any high temperature flow with a resonance line in the 300 to 800 nm range, for instance other types of flames, rocket plumes or low temperature plasmas.

  7. Problem reporting and tracking system: a systems engineering challenge

    Science.gov (United States)

    Cortez, Vasco; Lopez, Bernhard; Whyborn, Nicholas; Price, Roberto; Hernandez, Octavio; Gairing, Stefan; Barrios, Emilio; Alarcon, Hector

    2016-08-01

    The problem reporting and tracking system (PRTS) is the ALMA system to register operational problems, track unplanned corrective operational maintenance activities and follow the investigations of all problems or possible issues arisen in operation activities. After the PRTS implementation appeared several issues that finally produced a lack in the management of the investigations, problems to produce KPIs, loss of information, among others. In order to improve PRTS, we carried out a process to review the status of system, define a set of modifications and implement a solution; all according to the stakeholder requirements. In this work, we shall present the methodology applied to define a set of concrete actions at the basis of understanding the complexity of the problem, which finally got to improve the interactions between different subsystems and enhance the communication at different levels.

  8. Multi-Point Combustion System: Final Report

    Science.gov (United States)

    Goeke, Jerry; Pack, Spencer; Zink, Gregory; Ryon, Jason

    2014-01-01

    A low-NOx emission combustor concept has been developed for NASA's Environmentally Responsible Aircraft (ERA) program to meet N+2 emissions goals for a 70,000 lb thrust engine application. These goals include 75 percent reduction of LTO NOx from CAEP6 standards without increasing CO, UHC, or smoke from that of current state of the art. An additional key factor in this work is to improve lean combustion stability over that of previous work performed on similar technology in the early 2000s. The purpose of this paper is to present the final report for the NASA contract. This work included the design, analysis, and test of a multi-point combustion system. All design work was based on the results of Computational Fluid Dynamics modeling with the end results tested on a medium pressure combustion rig at the UC and a medium pressure combustion rig at GRC. The theories behind the designs, results of analysis, and experimental test data will be discussed in this report. The combustion system consists of five radially staged rows of injectors, where ten small scale injectors are used in place of a single traditional nozzle. Major accomplishments of the current work include the design of a Multipoint Lean Direct Injection (MLDI) array and associated air blast and pilot fuel injectors, which is expected to meet or exceed the goal of a 75 percent reduction in LTO NOx from CAEP6 standards. This design incorporates a reduced number of injectors over previous multipoint designs, simplified and lightweight components, and a very compact combustor section. Additional outcomes of the program are validation that the design of these combustion systems can be aided by the use of Computational Fluid Dynamics to predict and reduce emissions. Furthermore, the staging of fuel through the individually controlled radially staged injector rows successfully demonstrated improved low power operability as well as improvements in emissions over previous multipoint designs. Additional comparison

  9. Japanese Learning Support Systems: Hinoki Project Report

    Directory of Open Access Journals (Sweden)

    HODOŠČEK, Bor

    2012-12-01

    Full Text Available In this report, we introduce the Hinoki project, which set out to develop web-based Computer-Assisted Language Learning (CALL systems for Japanese language learners more than a decade ago. Utilizing Natural Language Processing technologies and other linguistic resources, the project has come to encompass three systems, two corpora and many other resources. Beginning with the reading assistance system Asunaro, we describe the construction of Asunaro's multilingual dictionary and it's dependency grammar-based approach to reading assistance. The second system, Natsume, is a writing assistance system that uses large-scale corpora to provide an easy to use collocation search feature that is interesting for it's inclusion of the concept of genre. The final system, Nutmeg, is an extension of Natsume and the Natane learner corpus. It provides automatic correction of learners errors in compositions by using Natsume for its large corpus and genre-aware collocation data and Natane for its data on learner errors.-----V poročilu predstavljamo projekt Hinoki, ki je bil zastavljen pred več kot desetimi leti za izdelavo spletnih sistemov za računalniško podprto učenje japonščine kot tujega jezika. Z uporabo jezikovnih tehnologij in drugih jezikovnih virov so bili v okviru projekta razviti trije sistemi, dva korpusa in veliko drugih virov. V nadaljevanju predstavljamo sistem Asunaro za podporo branju, izgradnjo njegovega večjezičnega slovarja in pristop k podpori branju, ki sloni na odvisnostni slovnici; sistem za podporo pisanju Natsume s preprostim vmesnikom za iskanje žanrsko določenih kolokacij v obsežnih korpusih; ter sistem Nutmeg za samodejno popravljanje napak. Nutmeg je nadgradnja sistema Natsume in učnega korpusa Natane, ponuja samodejno popravljanje napak med samim pisanjem z uporabo žanrsko določenih kolokacijskih informacij iz obsežnih korpusov preko sistema Natsume in informacij o napakah piscev, ki se učijo japonščine kot tujega

  10. Schedule Sales Query Report Generation System

    Data.gov (United States)

    General Services Administration — Schedule Sales Query presents sales volume figures as reported to GSA by contractors. The reports are generated as quarterly reports for the current year and the...

  11. Imaging systems for biomedical applications. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Radparvar, M.

    1995-06-06

    Many of the activities of the human body manifest themselves by the presence of a very weak magnetic field outside the body, a field that is so weak that an ultra-sensitive magnetic sensor is needed for specific biomagnetic measurements. Superconducting QUantum Interference Devices (SQUIDs) are extremely sensitive detectors of magnetic flux and have been used extensively to detect the human magnetocardiogram, and magnetoencephalogram. and other biomagnetic signals. In order to utilize a SQUID as a magnetometer, its transfer characteristics should be linearized. This linearization requires extensive peripheral electronics, thus limiting the number of SQUID magnetometer channels in a practical system. The proposed digital SQUID integrates the processing circuitry on the same cryogenic chip as the SQUID magnetometer and eliminates the sophisticated peripheral electronics. Such a system is compact and cost effective, and requires minimal support electronics. Under a DOE-sponsored SBIR program, we designed, simulated, laid out, fabricated, evaluated, and demonstrated a digital SQUID magnetometer. This report summarizes the accomplishments under this program and clearly demonstrates that all of the tasks proposed in the phase II application were successfully completed with confirmed experimental results.

  12. Bullous Systemic Lupus Erythematosus: Case report

    Directory of Open Access Journals (Sweden)

    Miziara, Ivan Dieb

    2014-01-01

    Full Text Available Introduction: Bullous systemic lupus erythematosus (BSLE is an autoantibody-mediated disease with subepidermal blisters. It is a rare form of presentation of SLE that occurs in less than 5% of cases of lupus. Case Report: A 27-year-old, female, FRS patient reported the appearance of painful bullous lesions in the left nasal wing and left buccal mucosa that displayed sudden and rapid growth. She sought advice from emergency dermatology staff 15 days after onset and was hospitalized with suspected bullous disease. Intravenous antibiotics and steroids were administered initially, but the patient showed no improvement during hospitalization. She displayed further extensive injuries to the trunk, axillae, and vulva as well as disruption of the bullous lesions, which remained as hyperemic scars. Incisional biopsy of a lesion in the left buccal mucosa was performed, and pathological results indicated mucositis with extensive erosion and the presence of a predominantly neutrophilic infiltrate with degeneration of basal cells and apoptotic keratinocytes. Under direct immunofluorescence, the skin showed anti-IgA, anti-IgM, and anti-IgG linear fluorescence on the continuous dermal side of the cleavage. Indirect immunofluorescence of the skin showed conjugated anti-IgA, was anti-IgM negative, and displayed pemphigus in conjunction with anti-IgG fluorescence in the nucleus of keratinocytes, consistent with a diagnosis of bullous lupus erythematosus. Discussion: BSLE is an acquired autoimmune bullous disease caused by autoantibodies against type VII collagen or other components of the junctional zone, epidermis, and dermis. It must be differentiated from the secondary bubbles and vacuolar degeneration of the basement membrane that may occur in acute and subacute cutaneous lupus erythematosus.

  13. Bullous Systemic Lupus Erythematosus: Case report

    Science.gov (United States)

    Miziara, Ivan Dieb; Mahmoud, Ali; Chagury, Azis Arruda; Alves, Ricardo Dourado

    2013-01-01

    Summary Introduction: Bullous systemic lupus erythematosus (BSLE) is an autoantibody-mediated disease with subepidermal blisters. It is a rare form of presentation of SLE that occurs in less than 5% of cases of lupus. Case Report: A 27-year-old, female, FRS patient reported the appearance of painful bullous lesions in the left nasal wing and left buccal mucosa that displayed sudden and rapid growth. She sought advice from emergency dermatology staff 15 days after onset and was hospitalized with suspected bullous disease. Intravenous antibiotics and steroids were administered initially, but the patient showed no improvement during hospitalization. She displayed further extensive injuries to the trunk, axillae, and vulva as well as disruption of the bullous lesions, which remained as hyperemic scars. Incisional biopsy of a lesion in the left buccal mucosa was performed, and pathological results indicated mucositis with extensive erosion and the presence of a predominantly neutrophilic infiltrate with degeneration of basal cells and apoptotic keratinocytes. Under direct immunofluorescence, the skin showed anti-IgA, anti-IgM, and anti-IgG linear fluorescence on the continuous dermal side of the cleavage. Indirect immunofluorescence of the skin showed conjugated anti-IgA, was anti-IgM negative, and displayed pemphigus in conjunction with anti-IgG fluorescence in the nucleus of keratinocytes, consistent with a diagnosis of bullous lupus erythematosus. Discussion: BSLE is an acquired autoimmune bullous disease caused by autoantibodies against type VII collagen or other components of the junctional zone, epidermis, and dermis. It must be differentiated from the secondary bubbles and vacuolar degeneration of the basement membrane that may occur in acute and subacute cutaneous lupus erythematosus. PMID:25992032

  14. Transactive Campus Energy Systems: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Katipamula, Srinivas; Corbin, Charles D.; Haack, Jereme N.; Hao, He; Kim, Woohyun; Hostick, Donna J.; Akyol, Bora A.; Allwardt, Craig H.; Carpenter, Brandon J.; Huang, Sen; Liu, Guopeng; Lutes, Robert G.; Makhmalbaf, Atefe; Mendon, Vrushali V.; Ngo, Hung; Somasundaram, Sriram; Underhill, Ronald M.; Zhao, Mingjie

    2017-09-26

    Transactive energy refers to the combination of economic and control techniques to improve grid reliability and efficiency. The fundamental purpose of transactive energy management is to seamlessly coordinate the operation of large numbers of new intelligent assets—such as distributed solar, energy storage and responsive building loads—to provide the flexibility needed to operate the power grid reliably and at minimum cost, particularly one filled with intermittent renewable generation such as the Pacific Northwest. It addresses the key challenge of providing smooth, stable, and predictable “control” of these assets, despite the fact that most are neither owned nor directly controlled by the power grid. The Clean Energy and Transactive Campus (CETC) work described in this report was done as part of a Cooperative Research and Development Agreement (CRADA) between the U.S. Department of Energy’s Pacific Northwest National Laboratory (PNNL) and the Washington State Department of Commerce (Commerce) through the Clean Energy Fund (CEF). The project team consisted of PNNL, the University of Washington (UW) and Washington State University (WSU), to connect the PNNL, UW, and WSU campuses to form a multi-campus testbed for transaction-based energy management—transactive—solutions. Building on the foundational transactive system established by the Pacific Northwest Smart Grid Demonstration (PNWSGD), the purpose of the project was to construct the testbed as both a regional flexibility resource and as a platform for research and development (R&D) on buildings/grid integration and information-based energy efficiency. This report provides a summary of the various tasks performed under the CRADA.

  15. The evaluation of a web-based incident reporting system.

    Science.gov (United States)

    Kuo, Ya-Hui; Lee, Ting-Ting; Mills, Mary Etta; Lin, Kuan-Chia

    2012-07-01

    A Web-based reporting system is essential to report incident events anonymously and confidentially. The purpose of this study was to evaluate a Web-based reporting system in Taiwan. User satisfaction and impact of system use were evaluated through a survey answered by 249 nurses. Incident events reported in paper and electronic systems were collected for comparison purposes. Study variables included system user satisfaction, willingness to report, number of reports, severity of the events, and efficiency of the reporting process. Results revealed that senior nurses were less willing to report events, nurses on internal medicine units had higher satisfaction than others, and lowest satisfaction was related to the time it took to file a report. In addition, the Web-based reporting system was used more often than the paper system. The percentages of events reported were significantly higher in the Web-based system in laboratory, environment/device, and incidents occurring in other units, whereas the proportions of reports involving bedsores and dislocation of endotracheal tubes were decreased. Finally, moderate injury event reporting decreased, whereas minor or minimal injury event reporting increased. The study recommends that the data entry process be simplified and the network system be improved to increase user satisfaction and reporting rates.

  16. 78 FR 38096 - Fatality Analysis Reporting System Information Collection

    Science.gov (United States)

    2013-06-25

    ... Number NHTSA-2012-0168] Fatality Analysis Reporting System Information Collection AGENCY: National... comments on the following proposed collections of information: (1) Title: Fatal Analysis Reporting System... damage associated with motor vehicle accidents. The Fatality Analysis Reporting System (FARS) is a major...

  17. Buried waste containment system materials. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Weidner, J.R.; Shaw, P.G.

    1997-10-01

    This report describes the results of a test program to validate the application of a latex-modified cement formulation for use with the Buried Waste Containment System (BWCS) process during a proof of principle (POP) demonstration. The test program included three objectives. One objective was to validate the barrier material mix formulation to be used with the BWCS equipment. A basic mix formula for initial trials was supplied by the cement and latex vendors. The suitability of the material for BWCS application was verified by laboratory testing at the Idaho National Engineering and Environmental Laboratory (INEEL). A second objective was to determine if the POP BWCS material emplacement process adversely affected the barrier material properties. This objective was met by measuring and comparing properties of material prepared in the INEEL Materials Testing Laboratory (MTL) with identical properties of material produced by the BWCS field tests. These measurements included hydraulic conductivity to determine if the material met the US Environmental Protection Agency (EPA) requirements for barriers used for hazardous waste sites, petrographic analysis to allow an assessment of barrier material separation and segregation during emplacement, and a set of mechanical property tests typical of concrete characterization. The third objective was to measure the hydraulic properties of barrier material containing a stop-start joint to determine if such a feature would meet the EPA requirements for hazardous waste site barriers.

  18. Ocean energy conversion systems annual research report

    Energy Technology Data Exchange (ETDEWEB)

    1981-03-01

    Alternative power cycle concepts to the closed-cycle Rankine are evaluated and those that show potential for delivering power in a cost-effective and environmentally acceptable fashion are explored. Concepts are classified according to the ocean energy resource: thermal, waves, currents, and salinity gradient. Research projects have been funded and reported in each of these areas. The lift of seawater entrained in a vertical steam flow can provide potential energy for a conventional hydraulic turbine conversion system. Quantification of the process and assessment of potential costs must be completed to support concept evaluation. Exploratory development is being completed in thermoelectricity and 2-phase nozzles for other thermal concepts. Wave energy concepts are being evaluated by analysis and model testing with present emphasis on pneumatic turbines and wave focussing. Likewise, several conversion approaches to ocean current energy are being evaluated. The use of salinity resources requires further research in membranes or the development of membraneless processes. Using the thermal resource in a Claude cycle process as a power converter is promising, and a program of R and D and subsystem development has been initiated to provide confirmation of the preliminary conclusion.

  19. Energy Innovation Systems Indicator Report 2012

    DEFF Research Database (Denmark)

    Klitkou, Antje; Borup, Mads; Iversen, Eric

    statistics and reports. Among these are the pilot report for a Nordic Energy Technology Scoreboard (Klitkou et al., 2010) and parts of the results of the eNERGIA project (Klitkou et al., 2008b). For this report the indicator based tables and figures have been updated and new developments in the discussion...

  20. Patient-Reported Outcome Measures in Systemic Sclerosis (Scleroderma).

    Science.gov (United States)

    Pellar, Russell E; Tingey, Theresa M; Pope, Janet Elizabeth

    2016-05-01

    Scleroderma (systemic sclerosis) is a rare autoimmune connective tissue disease that can damage multiple organs and reduce quality of life. Patient-reported outcome measures capture the patient's perspective. Some measures are specific to systemic sclerosis and others are general. Patient-reported outcomes in systemic sclerosis are important to aid in understanding the impact of systemic sclerosis on patients.

  1. 20 CFR 637.300 - Management systems, reporting and recordkeeping.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Management systems, reporting and... Standards and Procedures § 637.300 Management systems, reporting and recordkeeping. (a) The Governor shall ensure that the State's financial management system and recordkeeping system comply with subpart D...

  2. A brief report on mets system

    Digital Repository Service at National Institute of Oceanography (India)

    Fernandes, W.A.

    Mets system is basically a gas monitoring system, used for the detection of underwater gas. The system consists of a sensor, datalogger and energy module. The sensor works on the diffusion techniques. The system can be deployed to a water depth...

  3. 49 CFR 191.13 - Distribution systems reporting transmission pipelines; transmission or gathering systems...

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Distribution systems reporting transmission pipelines; transmission or gathering systems reporting distribution pipelines. 191.13 Section 191.13... Distribution systems reporting transmission pipelines; transmission or gathering systems reporting...

  4. Panel report on corrosion in energy systems

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-06-01

    Corrosion problems in high-temperature (non aqueous) energy systems, corrosion in aqueous energy systems and institutional problems inhibiting the development of corrosion science and engineering are discussed. (FS)

  5. Panel report on corrosion in energy systems

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-06-01

    Corrosion problems in high-temperature (non aqueous) energy systems, corrosion in aqueous energy systems and institutional problems inhibiting the development of corrosion science and engineering are discussed. (FS)

  6. 47 CFR 76.403 - Cable television system reports.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Cable television system reports. 76.403 Section 76.403 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Forms and Reports § 76.403 Cable television system reports. The operator of every operational cable...

  7. Hawaii DAR Fisherman Reporting System Data (Catch)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the catch data from fishers who take marine life for commercial purposes and report their catch, effort, and sales on a commercial catch...

  8. Solar thermal power systems. Summary report

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    The work accomplished by the Aerospace Corporation from April 1973 through November 1979 in the mission analysis of solar thermal power systems is summarized. Sponsorship of this effort was initiated by the National Science Foundation, continued by the Energy Research and Development Administration, and most recently directed by the United States Department of Energy, Division of Solar Thermal Systems. Major findings and conclusions are sumarized for large power systems, small power systems, solar total energy systems, and solar irrigation systems, as well as special studies in the areas of energy storage, industrial process heat, and solar fuels and chemicals. The various data bases and computer programs utilized in these studies are described, and tables are provided listing financial and solar cost assumptions for each study. An extensive bibliography is included to facilitate review of specific study results and methodology.

  9. CDC WONDER: Vaccine Adverse Event Reporting System (VAERS)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Vaccine Adverse Event Reporting System (VAERS) online database on CDC WONDER provides counts and percentages of adverse event case reports after vaccination, by...

  10. FDA Adverse Event Reporting System (FAERS): Latest Quartely Data Files

    Data.gov (United States)

    U.S. Department of Health & Human Services — The FDA Adverse Event Reporting System (FAERS) is a database that contains information on adverse event and medication error reports submitted to FDA. The database...

  11. Container System Hardware (1992) Status Report

    Science.gov (United States)

    1992-01-01

    25 Equipment Deployment and Storage System ( EDSS ) .................................. 27 Shipping Frame, 4’ x 62/3’ x 8...old) 8115-01-354-0797 (new) Part I - Containers 25 Equipment Deployment and Storage System ( EDSS ) 26 Part I - Containers Equipment Deployment and...Storage System ( EDSS ) POINT OF CONTACT Mr. William Brower US Army Belvoir RD&E Center, SATBE-FMR Fort Belvoir, VA 22060-5606 DSN 654-3613/Commercial (703

  12. Production Facility System Reliability Analysis Report

    Energy Technology Data Exchange (ETDEWEB)

    Dale, Crystal Buchanan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Klein, Steven Karl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-06

    This document describes the reliability, maintainability, and availability (RMA) modeling of the Los Alamos National Laboratory (LANL) design for the Closed Loop Helium Cooling System (CLHCS) planned for the NorthStar accelerator-based 99Mo production facility. The current analysis incorporates a conceptual helium recovery system, beam diagnostics, and prototype control system into the reliability analysis. The results from the 1000 hr blower test are addressed.

  13. Flexible manufacturing system (FMS) evaluation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Setter, D.L.

    1993-02-01

    The applicability of the flexible manufacturing system (FMS) concept to automate machining and inspecting a family of stainless steel and aluminum hardware for electrical components has been evaluated. FMS was found to be appropriate and justifiable and a project was initiated to purchase and implement an FMS system. System specifications and procurement methodologies were developed that resulted in a conventional competitive bid procurement A proposal evaluation technique was developed consisting of 40% price, 40% technical compliance, and 20% supplier management capabilities.

  14. Electrical System Technology Working Group (WG) Report

    Science.gov (United States)

    Silverman, S.; Ford, F. E.

    1984-01-01

    The technology needs for space power systems (military, public, commercial) were assessed for the period 1995 to 2005 in the area of power management and distribution, components, circuits, subsystems, controls and autonomy, modeling and simulation. There was general agreement that the military requirements for pulse power would be the dominant factor in the growth of power systems. However, the growth of conventional power to the 100 to 250kw range would be in the public sector, with low Earth orbit needs being the driver toward large 100kw systems. An overall philosophy for large power system development is also described.

  15. Reliability of photovoltaic systems: A field report

    Science.gov (United States)

    Thomas, M. G.; Fuentes, M. K.; Lashway, C.; Black, B. D.

    Performance studies and field measurements of photovoltaic systems indicate a 1 to 2% per year degradation in array energy production. The cause for much of the degradation has been identified as soiling, failed modules, and failures in interconnections. System performance evaluation continues to be complicated by the poor reliability of some power conditioning hardware that has greatly diminished the system availability and by inconsistent field ratings. Nevertheless, the current system reliability is consistent with degradation of less than 10% in 5 years and with estimates of less than 10% per year of the energy value for O and M.

  16. Reliability of photovoltaic systems - A field report

    Science.gov (United States)

    Thomas, M. G.; Fuentes, M. K.; Lashway, C.; Black, B. D.

    Performance studies and field measurements of photovoltaic systems indicate a 1-2-percent/yr degradation in array energy production. The cause for much of the degradation has been identified as soiling, failed modules, and failures in interconnections. System performance evaluation continues to be complicated by the poor reliability of some power conditioning hardware (which greatly diminished system availability) and by inconsistent field ratings. Nevertheless, the current system reliability is consistent with degradation of less than 10 percent in 5 years and with estimates of less than 10 percent/yr of the energy value for O&M.

  17. Solar heating system installed at Troy, Ohio. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-09-01

    This document is the Final Report of the Solar Energy System located at Troy-Miami County Public Library, Troy, Ohio. The completed system is composed of tree basic subsystems: the collector system consisting of 3264 square feet of Owens Illinois evacuated glass tube collectors; the storage system which includes a 5000-gallon insulated steel tank; and the distribution and control system which includes piping, pumping and control logic for the efficient and safe operation of the entire system. This solar heating system was installed in an existing facility and is, therefore, a retrofit system. This report includes extracts from the site files, specifications, drawings, installation, operation and maintenance instructions.

  18. Report on the SLC control system

    Energy Technology Data Exchange (ETDEWEB)

    Phinney, N.

    1985-05-01

    The SLC control system is based on a VAX 11/780 Host computer with approximately 50 microprocessor clusters which provide distributed intelligence and control of all CAMAC interface modules. This paper will present an overview of the system including current status and a description of the software architecture and communication protocols. 8 refs.

  19. FY2015 Vehicle Systems Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-01-31

    The Vehicle Systems research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to advancing light-, medium-, and heavy-duty vehicle systems to help maximize the number of electric miles driven and increase the energy efficiency of transportation vehicles.

  20. A Glance at the Bethesda System for Reporting Thyroid Cytopathology

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Hee Jung; Kwak, Jin Young; Kim, Eun Kyung [Yonsei University College of Medicine, Seoul (Korea, Republic of)

    2011-03-15

    Fine needle aspiration biopsy (FNAB) is an accurate and cost effective diagnostic tool for differentiating malignant and benign thyroid nodules. Despite the efforts of the Papanicolaou group to standardize thyroid cytopathology reporting, no universal standard reporting system exists to date. Pathologists believe that clinicians sufficiently understand FNAB cytological reports. However, this is not necessarily the case. There is often a significant gap between pathologists' beliefs and the clinicians' understanding. As a result, we propose 'The Bethesda System for Reporting Thyroid Cytopathology' by the National Cancer Institute. In this editorial, we briefly introduce the Bethesda System for Reporting Thyroid Cytopathology

  1. Traffic management system: Phase 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-30

    This report, conducted by Louis Berger International, Inc., was funded by the US Trade and Development Agency. This report identifies the primary and secondary air traffic networks inside and outside Buenos Aires Metropolitan Area where particular safety and traffic problems exist. The Consortium Louis Berger International, Inc.-IBI Group-UBATEC provides recommendations divided into two groups: one based on engineering aspects for each identified deficiency in the selected routes; and a second group that is based on the results of the evaluation of needs. This is Volume 3, Phase 2 Final Report, and it consists of the following: (1) Introduction; (2) Existing Conditions and Deficiencies; (3) Recommendations; and (4) Appendix: Definition of the Primary Network of the Metropolitan Area.

  2. Heavy quark and neutrino physics. Final technical report, FY1994--FY1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This report begins with an overview of KSU history in personnel and funding, creation of infrastructure, and physics. Then brief summaries are given for the following research projects: Fermilab E653: Measuring Charm and Beauty Decays via Hadronic Production in a Hybrid Emulsion Spectrometer; Fermilab E791: Continued Study of Heavy Flavors at TPL; Fermilab E815: Precision Measurements of Neutrino Neutral-Current Interactions Using a Sign-Selected Beam; Fermilab E872/DONUT: Direct Observation of {nu}{sub {tau}}; Fermilab E803/COSMOS: Neutrino Oscillations; KSU at the Fermilab D0 collider; Muon Collider; OJI Progress Report: Multisampling Drift Chamber.

  3. Traffic management system: Recommendations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-30

    This report identifies the primary and secondary air traffic networks inside and outside Buenos Aires Metropolitan Area where particular safety and traffic problems exist. The Consortium Louis Berger International, Inc.-IBI Group-UBATEC provides recommendations divided into two groups: one based on engineering aspects for each identified deficiency in the selected routes; and a second group that is based on the results of the evaluations of needs. This is Volume 5, Recommendations Final Report, and it provides recommendations to optimize transportation in the city of Buenos Aires.

  4. Assignment and Correspondence Tracking System - Tactical / Operational Reporting

    Data.gov (United States)

    Social Security Administration — Reporting data store for the Assignment and Correspondence Tracking System (ACT). ACT automates the assignment and tracking of correspondence processing within the...

  5. Proximity sensor system development. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Haley, D.C. [Oak Ridge National Lab., TN (United States); Pigoski, T.M. [Merrit Systems, Inc. (United States)

    1998-01-01

    Lockheed Martin Energy Research Corporation (LMERC) and Merritt Systems, Inc. (MSI) entered into a Cooperative Research and Development Agreement (CRADA) for the development and demonstration of a compact, modular proximity sensing system suitable for application to a wide class of manipulator systems operated in support of environmental restoration and waste management activities. In teleoperated modes, proximity sensing provides the manipulator operator continuous information regarding the proximity of the manipulator to objects in the workspace. In teleoperated and robotic modes, proximity sensing provides added safety through the implementation of active whole arm collision avoidance capabilities. Oak Ridge National Laboratory (ORNL), managed by LMERC for the United States Department of Energy (DOE), has developed an application specific integrated circuit (ASIC) design for the electronics required to support a modular whole arm proximity sensing system based on the use of capacitive sensors developed at Sandia National Laboratories. The use of ASIC technology greatly reduces the size of the electronics required to support the selected sensor types allowing deployment of many small sensor nodes over a large area of the manipulator surface to provide maximum sensor coverage. The ASIC design also provides a communication interface to support sensor commands from and sensor data transmission to a distributed processing system which allows modular implementation and operation of the sensor system. MSI is a commercial small business specializing in proximity sensing systems based upon infrared and acoustic sensors.

  6. Photovoltaic systems for export application. Informal report

    Energy Technology Data Exchange (ETDEWEB)

    Duffy, J.; Campbell, H.; Sajo, A.; Sanz, E. [Univ. of Lowell, MA (United States)

    1988-01-31

    One approach to improving the competitiveness of photovoltaic systems is the development of designs specifically for export applications. In other words, where is it appropriate in a system design to incorporate components manufactured and/or assembled in the receiving country in order to improve the photovoltaic exports from the US? What appears to be needed is a systematic method of evaluating the potential for export from the US of PV systems for various application in different countries. Development of such a method was the goal of this project.

  7. 2016 Earth System Grid Federation Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-05-10

    The Earth System Grid Federation (ESGF) experienced a major setback in June 2015, when it experienced a security incident that brought all systems to a halt for more than half a year. However, federation developers and management committee members turned the incident into an opportunity to dramatically upgrade the system security and functionality and to develop planning and policy documents to guide ESGF evolution and success. Moreover, despite the incident, ESGF developer working teams continue to make strong and significant progress on various enhancement projects that will help ensure ESGF can meet the needs of the climate community in the coming years.

  8. Isolated systems with wind power. Main report

    DEFF Research Database (Denmark)

    Lundsager, P.; Bindner, Henrik W.; Clausen, Niels-Erik;

    2001-01-01

    approach for assessing the technical and economical feasibility of isolated power supply systems with wind energy. As a part of the project the following tasks were carried out: Review of literature, fieldmeasurements in Egypt, development of an inventory of small isolated systems, overview of end......The overall objective of this research project is to study the development of methods and guidelines rather than "universal solutions" for the use of wind energy in isolated communities. The main specific objective of the project is to develop and present amore unified and generally applicable...... for Isolated Systems with Wind Power, applicable for international organisations such as donoragencies and development banks....

  9. Water-storage-tube systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hemker, P.

    1981-12-24

    Passive solar collection/storage/distribution systems were surveyed, designed, fabricated, and mechanically and thermally tested. The types studied were clear and opaque fiberglass tubes, metal tubes with plastic liners, and thermosyphoning tubes. (MHR)

  10. LumiCal alignment system - Status report

    CERN Document Server

    Daniluk, W.; Lesiak, T.; Moszczyński, A.; Pawlik, B.; Wojtoń, T.; Zawiejski, L.

    2015-01-01

    The paper describes the status of the laser-based alignment-system for the luminosity detector, LumiCal, taking into considerations the conditions of the International Large Detector in the International Linear Collider project. The design of the system comprises two parts: the first one containing semi-transparent silicon sensors used to deliver simultaneous position measurements in the X,Y directions of the monitored object, and the second one in which the interferometric technique, i.e. the Frequency Scanning Interferometry (FSI), is proposed. Two laboratory prototypes for both components of the system were built and the preliminary measurements of the DUT displacements demonstrated their utility in the design of the final alignment system. The alignment of the LumiCal detector will allow us to monitor the detector displacements and possible deformations in its internal structure. Lack of information of the displacements will introduce a systematic effect which will have an impact on the accuracy of the fi...

  11. Country Operational Plan and Reporting System

    Data.gov (United States)

    US Agency for International Development — This web-based information system allows for the annual entry and updating of Emergency Plan COPs, annual and semiannual program results, and budget information by...

  12. Hawaii DAR Dealer Reporting System Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In 2000 January, the Hawaii Division of Aquatic Resources (DAR) implemented a computerized data processing system for fish dealer data collected state-wide. Hawaii...

  13. Web-based Project Reporting System

    Data.gov (United States)

    US Agency for International Development — Web-PRS is a web-based system that captures financial information and project status information that is sortable by geographical location, pillar, project type and...

  14. Traceability of biopharmaceuticals in spontaneous reporting systems

    DEFF Research Database (Denmark)

    Vermeer, Niels S; Straus, Sabine M J M; Mantel-Teeuwisse, Aukje K

    2013-01-01

    BACKGROUND: Adverse drug reactions (ADRs) of biopharmaceuticals can be batch or product specific, resulting from small differences in the manufacturing process. Detailed exposure information should be readily available in systems for postmarketing safety surveillance of biopharmaceuticals...

  15. PV Systems Reliability Final Technical Report.

    Energy Technology Data Exchange (ETDEWEB)

    Lavrova, Olga [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Flicker, Jack David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Jay [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Armijo, Kenneth Miguel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Sigifredo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schindelholz, Eric John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sorensen, Neil R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Yang, Benjamin Bing-Yeh [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The continued exponential growth of photovoltaic technologies paves a path to a solar-powered world, but requires continued progress toward low-cost, high-reliability, high-performance photovoltaic (PV) systems. High reliability is an essential element in achieving low-cost solar electricity by reducing operation and maintenance (O&M) costs and extending system lifetime and availability, but these attributes are difficult to verify at the time of installation. Utilities, financiers, homeowners, and planners are demanding this information in order to evaluate their financial risk as a prerequisite to large investments. Reliability research and development (R&D) is needed to build market confidence by improving product reliability and by improving predictions of system availability, O&M cost, and lifetime. This project is focused on understanding, predicting, and improving the reliability of PV systems. The two areas being pursued include PV arc-fault and ground fault issues, and inverter reliability.

  16. Advanced lubrication systems and materials. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, S.

    1998-05-07

    This report described the work conducted at the National Institute of Standards and Technology under an interagency agreement signed in September 1992 between DOE and NIST for 5 years. The interagency agreement envisions continual funding from DOE to support the development of fuel efficient, low emission engine technologies in terms of lubrication, friction, and wear control encountered in the development of advanced transportation technologies. However, in 1994, the DOE office of transportation technologies was reorganized and the tribology program was dissolved. The work at NIST therefore continued at a low level without further funding from DOE. The work continued to support transportation technologies in the development of fuel efficient, low emission engine development. Under this program, significant progress has been made in advancing the state of the art of lubrication technology for advanced engine research and development. Some of the highlights are: (1) developed an advanced high temperature liquid lubricant capable of sustaining high temperatures in a prototype heat engine; (2) developed a novel liquid lubricant which potentially could lower the emission of heavy duty diesel engines; (3) developed lubricant chemistries for ceramics used in the heat engines; (4) developed application maps for ceramic lubricant chemistry combinations for design purpose; and (5) developed novel test methods to screen lubricant chemistries for automotive air-conditioning compressors lubricated by R-134a (Freon substitute). Most of these findings have been reported to the DOE program office through Argonne National Laboratory who manages the overall program. A list of those reports and a copy of the report submitted to the Argonne National Laboratory is attached in Appendix A. Additional reports have also been submitted separately to DOE program managers. These are attached in Appendix B.

  17. AN INTERIM REPORT ON SOFT SYSTEMS EVALUATION

    Directory of Open Access Journals (Sweden)

    Viljem Rupnik

    2011-02-01

    Full Text Available As application areas rapidly grow beyond the theoretical framework of fundamental decision theory we are very often temptated to see whether or not soft systems may promise some efficient modelling of real life problems. The pioneering bust towards soft systems methodology has come from the needs of mathematical sociology. Its contemporary definition as well as its applied architecture have been dealt with as in a paper proposed.

  18. Advanced Turbine Systems Program. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    The Allison Gas Turbine Division (Allison) of General Motors Corporation conducted the Advanced Turbine Systems (ATS) program feasibility study (Phase I) in accordance with the Morgantown Energy Technology Center`s (METC`s) contract DE-AC21-86MC23165 A028. This feasibility study was to define and describe a natural gas-fired reference system which would meet the objective of {ge}60% overall efficiency, produce nitrogen oxides (NO{sub x}) emissions 10% less than the state-of-the-art without post combustion controls, and cost of electricity of the N{sup th} system to be approximately 10% below that of the current systems. In addition, the selected natural gas-fired reference system was expected to be adaptable to coal. The Allison proposed reference system feasibility study incorporated Allison`s long-term experience from advanced aerospace and military technology programs. This experience base is pertinent and crucial to the success of the ATS program. The existing aeroderivative technology base includes high temperature hot section design capability, single crystal technology, advanced cooling techniques, high temperature ceramics, ultrahigh turbomachinery components design, advanced cycles, and sophisticated computer codes.

  19. Final Report Advanced Quasioptical Launcher System

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey Neilson

    2010-04-30

    This program developed an analytical design tool for designing antenna and mirror systems to convert whispering gallery RF modes to Gaussian or HE11 modes. Whispering gallery modes are generated by gyrotrons used for electron cyclotron heating of fusion plasmas in tokamaks. These modes cannot be easily transmitted and must be converted to free space or waveguide modes compatible with transmission line systems.This program improved the capability of SURF3D/LOT, which was initially developed in a previous SBIR program. This suite of codes revolutionized quasi-optical launcher design, and this code, or equivalent codes, are now used worldwide. This program added functionality to SURF3D/LOT to allow creating of more compact launcher and mirror systems and provide direct coupling to corrugated waveguide within the vacuum envelope of the gyrotron. Analysis was also extended to include full-wave analysis of mirror transmission line systems. The code includes a graphical user interface and is available for advanced design of launcher systems.

  20. NKS MOMS. Final report. [Mobile Measurement Systems

    Energy Technology Data Exchange (ETDEWEB)

    Nilssen, J. [Norwegian Radiation Protection Authority (NRPA) (Norway); Aage, H.K. [Danish Emergency Management Agency (DEMA) (Denmark); Palsson, S.E. [Icelandic Radiation Safety Authority (IRSA) (Iceland)

    2013-02-15

    Mobile car-borne measurement systems are an important asset in early phase emergency response in all Nordic countries. However, through the development of the systems in the different countries, there are considerable differences between the systems developed. This complicates Nordic cooperation and mutual assistance in emergency situations. This project aimed to facilitate harmonization of mobile measurement systems between the Nordic countries. The project focused on harmonizing data formats, information exchange and measurement strategies. Although the work done was funded by each member, the project established a good platform for cooperation which will hopefully continue beyond the scope of the project. A two-day seminar was held in May 2012, where all participants presented the current status (equipment, methods used etc.), in addition to invited speakers presenting development within the field of mobile detection and in situ measurements. Exchange of experiences and information on different measurement systems and practises in use was an important part of the seminar. The seminar was followed up by a small workshop during the REFOX exercise in Lund, Sweden, September 2012. Exchange of measurement data from the exercise was facilitated through a workspace proveded by NRPA as part of the MOMS project. The work done in this project will be presented at the NordEx12 seminar in March 2013. (Author)

  1. WRAP TRUPACT loading systems operational test report

    Energy Technology Data Exchange (ETDEWEB)

    DOSRAMOS, E.V.

    1999-09-01

    This Operational Test Report documents the operational testing of the TRUPACT process equipment HNF-3918, Revision 0, TRUPACT Operational Test Procedure. The test accomplished the following: Procedure validation; Facility equipment interface; Facility personnel support; and Subcontractor personnel support interface. Field changes are documented as test exceptions with resolutions. All resolutions are completed or a formal method is identified to track the resolution through to completion.

  2. Autonomous microexplosives subsurface tracing system final report.

    Energy Technology Data Exchange (ETDEWEB)

    Engler, Bruce Phillip; Nogan, John; Melof, Brian Matthew; Uhl, James Eugene; Dulleck, George R., Jr.; Ingram, Brian V.; Grubelich, Mark Charles; Rivas, Raul R.; Cooper, Paul W.; Warpinski, Norman Raymond; Kravitz, Stanley H.

    2004-04-01

    The objective of the autonomous micro-explosive subsurface tracing system is to image the location and geometry of hydraulically induced fractures in subsurface petroleum reservoirs. This system is based on the insertion of a swarm of autonomous micro-explosive packages during the fracturing process, with subsequent triggering of the energetic material to create an array of micro-seismic sources that can be detected and analyzed using existing seismic receiver arrays and analysis software. The project included investigations of energetic mixtures, triggering systems, package size and shape, and seismic output. Given the current absence of any technology capable of such high resolution mapping of subsurface structures, this technology has the potential for major impact on petroleum industry, which spends approximately $1 billion dollar per year on hydraulic fracturing operations in the United States alone.

  3. [Reporting of side-effects--a system in need of improvement. Reporting of a physician questionnaire].

    Science.gov (United States)

    Ekbom, Ylva; Hedenmalm, Karin; Dalin, Linda; Lönnroth, Knut; Persson, Ingemar

    2002-08-22

    The spontaneous reporting system in Sweden is based on reporting by health care professionals of adverse drug reactions (ADRs) to the Medical Products Agency. The usefulness of the spontaneous reporting system is limited by a substantial degree of underreporting. In order to study factors that make reporting of ADRs difficult as well as to obtain responses to suggestions that could increase the reporting of ADRs, an enquiry was sent to 300 randomly selected physicians. The most important factors that make reporting of ADRs more difficult are lack of time and forgetfulness. Most physicians stated that they would report ADRs to a greater extent if reporting was simpler, if resources were available or if the response to the reporting was improved. The majority of the physicians who had a computer at work stated that they would like to access the reporting form electronically.

  4. Multi Megawatt Power System Analysis Report

    Energy Technology Data Exchange (ETDEWEB)

    Longhurst, Glen Reed; Harvego, Edwin Allan; Schnitzler, Bruce Gordon; Seifert, Gary Dean; Sharpe, John Phillip; Verrill, Donald Alan; Watts, Kenneth Donald; Parks, Benjamin Travis

    2001-11-01

    Missions to the outer planets or to near-by planets requiring short times and/or increased payload carrying capability will benefit from nuclear power. A concept study was undertaken to evaluate options for a multi-megawatt power source for nuclear electric propulsion. The nominal electric power requirement was set at 15 MWe with an assumed mission profile of 120 days at full power, 60 days in hot standby, and another 120 days of full power, repeated several times for 7 years of service. Of the numerous options considered, two that appeared to have the greatest promise were a gas-cooled reactor based on the NERVA Derivative design, operating a closed cycle Brayton power conversion system; and a molten lithium-cooled reactor based on SP-100 technology, driving a boiling potassium Rankine power conversion system. This study examined the relative merits of these two systems, seeking to optimize the specific mass. Conclusions were that either concept appeared capable of approaching the specific mass goal of 3-5 kg/kWe estimated to be needed for this class of mission, though neither could be realized without substantial development in reactor fuels technology, thermal radiator mass efficiency, and power conversion and distribution electronics and systems capable of operating at high temperatures. Though the gas-Brayton systems showed an apparent advantage in specific mass, differences in the degree of conservatism inherent in the models used suggests expectations for the two approaches may be similar. Brayton systems eliminate the need to deal with two-phase flows in the microgravity environment of space.

  5. Multipurpose locator tag system : LDRD 65145 final report.

    Energy Technology Data Exchange (ETDEWEB)

    Greenway, Douglas Jr.; Schuster, Gary R.

    2003-11-01

    This report summarizes work performed to determine the capability of the Pinpoint Locator system, a commercial system designed and manufactured by RF Technologies. It is intended for use in finding people with locator badges in multi-story buildings. The Pinpoint system evaluated is a cell-based system, meaning it can only locate badges within an area bordered by its antennas.

  6. Improving the accuracy of fingerprinting system using multibiometric approach

    Directory of Open Access Journals (Sweden)

    Safa M. AL-Taie

    2016-07-01

    Full Text Available Biometric technology is a science that used to verify or identify the individual based on physical and/or behavioral traits. Although biometric systems are considered more secure than other traditional methods such as password, or key, they also have many limitations such as noisy image, or spoof attack. One of the solutions to overcome these limitations, is by applying a multibiometric system. Multibiometric system has a significant effect in improving the performance of both security and accuracy of the system. It also can alleviate the spoof attacks and reduce the fail to enroll error. A multi-sample is one implementations of the multibiometric systems. In this study, a new algorithm is suggested to provide a second chance for the genuine user who is rejected, to compare his/her provided finger with the other samples of the same finger. Multisampling fingerprint is used to implement this new algorithm. The algorithm is activated when the match score of the user is not equal to a threshold but close to it, then the system provides another chance to compare the finger with another sample of the same trait. Using multi-sample biometric system improved the performance of the system by reducing the False Reject Rate (FRR. Applying the original matching algorithm on the presented database produced 3 genuine users, and 5 imposters for the same fingerprint. While after implementing the suggested condition, the system performance is enhanced by producing 6 genuine users, and 2 imposters for the same fingerprint. This work was built and executed depending on a previous Matlab code presented by Zhi Li Wu. Thresholds and Receiver Operating Characteristic (ROC curves computed before and after implementing the suggested multibiometric algorithm. Both ROC curves compared. A final decision and recommendations are provided depending on the results obtained from this project.

  7. KTeV beam systems design report

    Energy Technology Data Exchange (ETDEWEB)

    Bocean, V.; Childress, S.; Coleman, R. [and others

    1997-09-01

    The primary and secondary beams for the KTeV experiments E799-II and E832 are discussed. The specifications are presented and justified. The technical details of the implementation of the primary beam transport and stability are detailed. The target, beam dump, and radiation safety issues are discussed. The details of the collimation system for the pair of secondary beams are presented.

  8. Overdenture with accesspost system: A clinical report

    Directory of Open Access Journals (Sweden)

    Deepti C Jain

    2011-01-01

    Full Text Available A patient presented with an unfavorable distribution of teeth in the arch which precluded treatment with a removable partial denture. The unique pattern of partial edentulism was treated with an overdenture restoration using accesspost system. The final restoration was stable, well retained and esthetic, serving as a conservative approach to root preservation.

  9. Del Mod System. 1972 Annual Report.

    Science.gov (United States)

    Purnell, Charlotte H.

    The overall aim of the Del Mod System is the improvement of science programs taught in Delaware schools; it is a working agreement among the University of Delaware, Delaware Technical and Community College, Delaware State College, State Department of Public Instruction, industry, and the schools. It was formed to bring about changes in science…

  10. Petroleum Quality Information System 2013 Annual Report

    Science.gov (United States)

    2013-01-01

    Puerto Rico, Virgin Is- lands 10 Central & South America Belize, Columbia, Curacao, Costa Rica, Ecuador, El Salvador, Guatemala, Honduras , Mexico...Nicaragua, Panama, Peru 11 Canada Canada 12 Africa Cape Verde, Ghana 2. Introduction Petroleum Quality Information System 10 JP5 16.47

  11. Crusader Automated Docking System Phase 3 report

    Energy Technology Data Exchange (ETDEWEB)

    Jatko, W.B.; Goddard, J.S.; Ferrell, R.K.; Gleason, S.S.; Hicks, J.S.; Varma, V.K.

    1996-03-01

    The US Army is developing the next generation of battlefield artillery vehicles, including an advanced, self-propelled howitzer and a companion resupply vehicle. The resupply vehicle is intended to rendezvous with the howitzer near the battlefront and to upload ammunition to the howitzer. The Army has recommended that the vehicles incorporate robotics to increase safety, by allowing the crew to remain inside their vehicles during resupply operations. Oak Ridge National Laboratory has developed an autonomous docking system for a 6-D.F. robotic, ammunition transfer arm. The docking system augments the operator`s abilities by determining the position and orientation (pose) of a docking port. The pose is the location of the x, y, and z reference axes in 3-D space; and the orientation is the rotations--roll, pitch, and yaw--about those axes. Bye precisely determining the pose of the docking port, the robot can be instructed to move to the docking position without operator intervention. The system uses a video camera and frame grabber to digitize images of the special docking port. Custom algorithms were developed to recognize the port in the camera image, to determine the pose from its image features, and to distribute the results to the robot control computer. The system is loosely coupled to the robot and can be easily adapted to different mechanical configurations. The system has successfully demonstrated autonomous docking on a 24-in. tabletop robot and a 12-ft ammunition resupply robot. The update rate, measurement accuracy, continuous operation, and accuracy with obstructed view have been determined experimentally.

  12. Communicable Disease Reporting Systems in the World: A System­atic Review Article

    Directory of Open Access Journals (Sweden)

    Ali JANATI

    2015-11-01

    Full Text Available Background: Communicable disease reporting and surveillance system has poor infrastructure and supporters in most of countries. Its quality improvement is a challenge and requires an accurate and efficient care and reporting systems at all levels to achieve new and simple models. This study evaluates reporting systems of communicable diseases using systematic review.Methods: This was a systematic review study. For data collection, we used the following database and search engines: Proquest, Science direct, Pub MED, Scopes, Springer, and EBESCO. For Persian databases, we used SID, Iranmedex and Magiran. Our key words were "Communicable Diseases", "Notifiable Disease", "Disease Notification", "Reporting System"," Surveillance Systems" and "evaluation". Two independent researchers reviewed the resources and the results were classified in different domains.Results: From 1889 cases, only 66 resources were studied. The results were classified in several domains, including those who were reporting, reporting methods and procedures, responsibilities and reporting system characteristics, problems and solutions of the report, the reporting process, and receptor level.Conclusion: Disease-reporting system has similar problems in all parts of the world. Change, improve, update and continuous monitoring of the reporting system are very important. Although the reporting process can vary in different regions, but being perfect and timely are important principles in system design. Detailed explanations of tasks and providing appropriate instructions are the most important points to integrate an efficient reporting system. Keywords: Reporting, Diseases surveillance system, Disease control

  13. Solar thermal repowering systems integration. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Dubberly, L. J.; Gormely, J. E.; McKenzie, A. W.

    1979-08-01

    This report is a solar repowering integration analysis which defines the balance-of-plant characteristics and costs associated with the solar thermal repowering of existing gas/oil-fired electric generating plants. Solar repowering interface requirements for water/steam and salt or sodium-cooled central receivers are defined for unit sizes ranging from 50 MWe non-reheat to 350 MWe reheat. Finally balance-of-plant cost estimates are presented for each of six combinations of plant type, receiver type and percent solar repowering.

  14. New Automated System Available for Reporting Safety Concerns | Poster

    Science.gov (United States)

    A new system has been developed for reporting safety issues in the workplace. The Environment, Health, and Safety’s (EHS’) Safety Inspection and Issue Management System (SIIMS) is an online resource where any employee can report a problem or issue, said Siobhan Tierney, program manager at EHS.

  15. FunSETL–Functional Reporting for ERP Systems

    DEFF Research Database (Denmark)

    Nissen, Michael Nebel; Larsen, Ken Friis

    2008-01-01

    One of the essential features of enterprise resource planning systems is the ability to provide the users and decision makers with reports on how the enterprise is running, and to enable the enterprise to provide the authorities the required legal reports.  By their nature these reports needs to ...

  16. Tank waste remediation system mission analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Acree, C.D.

    1998-01-09

    This document describes and analyzes the technical requirements that the Tank Waste Remediation System (TWRS) must satisfy for the mission. This document further defines the technical requirements that TWRS must satisfy to supply feed to the private contractors` facilities and to store or dispose the immobilized waste following processing in these facilities. This document uses a two phased approach to the analysis to reflect the two-phased nature of the mission.

  17. Status Reporting on Weapon System Acquisition Programs,

    Science.gov (United States)

    1985-04-01

    Systems Division ( ASSD ) and the reschedulinq of vehicle acceptance testing milestones caused by thnse !e*e box deliveries. Impact to program: Contract...is primarily due to the late delivery of the ASSD boxes (approximately 10 months late). Impact to program: None. 2 S...integration for which BCWP has been taken. The cumulative cost variance of ($22.5M) is primarily due to the late box deliveries from ASSD and the

  18. Saenger space transportation system - Progress report

    Science.gov (United States)

    Koelle, Dietrich E.; Kuczera, Heribert

    1992-10-01

    The first part of the Saenger System Definition Study within the German National Hypersonics Technology Program (1988 to 1992) was completed by mid-1990. This paper summarizes the progress made and the status of the project as of that milestone which was formally completed by the System Study Presentation in July 1990. For the second phase of the study (mid-1990 to end 1992) the original philosophy of different upper stages for manned space operations and for unmanned cargo/payloads transportation is being maintained, however, a winged unmanned Horus-C version has been found to be a better solution than the originally conceived expendable ballistic stage Cargus. The advantage of this twin-Horus Concept is the greater commonality of both upper stages as well as the new return capability of payloads up to 7 Mg. The maximum payload capability of the expendable stage was of course higher, but it is assumed that for larger payloads a complementary launch vehicle (i.e. Ariane 5) will be further available. The paper also presents new data about the Horus return flight trajectories as well as on the aerothermodynamic studies and experimental work. Finally, aspects of mission operations and economics are discussed which are of special importance for such an advanced reusable space transportation system.

  19. LANL environmental restoration site ranking system: System description. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Merkhofer, L.; Kann, A.; Voth, M. [Applied Decision Analysis, Inc., Menlo Park, CA (United States)

    1992-10-13

    The basic structure of the LANL Environmental Restoration (ER) Site Ranking System and its use are described in this document. A related document, Instructions for Generating Inputs for the LANL ER Site Ranking System, contains detailed descriptions of the methods by which necessary inputs for the system will be generated. LANL has long recognized the need to provide a consistent basis for comparing the risks and other adverse consequences associated with the various waste problems at the Lab. The LANL ER Site Ranking System is being developed to help address this need. The specific purpose of the system is to help improve, defend, and explain prioritization decisions at the Potential Release Site (PRS) and Operable Unit (OU) level. The precise relationship of the Site Ranking System to the planning and overall budget processes is yet to be determined, as the system is still evolving. Generally speaking, the Site Ranking System will be used as a decision aid. That is, the system will be used to aid in the planning and budgetary decision-making process. It will never be used alone to make decisions. Like all models, the system can provide only a partial and approximate accounting of the factors important to budget and planning decisions. Decision makers at LANL will have to consider factors outside of the formal system when making final choices. Some of these other factors are regulatory requirements, DOE policy, and public concern. The main value of the site ranking system, therefore, is not the precise numbers it generates, but rather the general insights it provides.

  20. Overview of DOE Radiation Exposure Information Reporting System (REIRS)

    Energy Technology Data Exchange (ETDEWEB)

    Fix, J.J.; Briscoe, G.J.; Selby, J.M.; Vallario, E.J.

    1981-05-01

    The purpose of the study is to determine the adequacy of the present system, identify any necessary short-term improvements and propose feasible alternatives for an improved system. The study includes topical reports as follows: current Personnel Dosimetry Practices at DOE Facilities; overview of DOE Radiation Exposure Information Reporting System (REIRS); and alternatives to Provide Upgraded Occupational Exposure Record System. This study constitutes the second report and was a joint effort between Battelle Northwest and EG and G, Idaho Falls. EG and G has been responsible for the respository since the fall of 1978.

  1. [Ejaculatory system cysts: a case report].

    Science.gov (United States)

    Moretti, Matteo; Facchini, Francesco; Grande, Marco; Larosa, Michelangelo; Leone, Marco; Ziglioli, Francesco; Carlinfante, Gabriele; Pozzoli, Gian Luigi; Frattini, Antonio

    2014-01-01

    Male pelvic floor cysts are a rare clinical entity that include: Wolffian duct remnants, Müllerian duct remnants, cysts of the seminal vesicles, prostate and ejaculatory duct/vas deferens cysts.
 We report the clinical case of a 21-year-old male patient with a history of previous surgery in childhood and more precisely: partial colectomy for congenital megacolon, removal of dysplastic right kidney and subsequent surgical adhesiolysis for bowel obstruction.
 At 17, the patient was submitted to MRI for groin pain with an incidental finding of a cystic mass at the level of the right seminal vesicle. Consequently, a TUR-ED was performed at another urology unit, for a suspected seminal vesicle ectasia, without resolution of pain symptoms. The patient was referred to us for persistent genitourinary infections, ejaculation disorder and episodes of gross hematuria. An additional MRI confirmed the presence of a cystic mass of 5,5 cm with a suspected opening into prostatic urethra. Urethrocystoscopy and urethrocystography retrograde confirmed this anatomical communication. For the persistence of the symptoms we performed retropubic surgical exeresis of the mass, with a histopathological finding of benign cyst of the vas deferens.
 Two major postoperative complications were reported: a pelvic hematoma that required surgical exploration and a urinary extravasation at the level of prostatic urethra, which resolved with prolonged urethral catheterization.
 Male pelvic floor cysts are a rare disease with a complex clinical and therapeutic management. A correct diagnosis is based on clinical signs and symptoms together with imaging studies of the pelvic region. The high risk of erectile dysfunction and ejaculatory disorders correlated to a surgical approach, recommend a treatment of these lesions only for symptomatic cases.

  2. W-026, acceptance test report manipulator system

    Energy Technology Data Exchange (ETDEWEB)

    Watson, T.L.

    1997-04-15

    The purpose of the WRAP Manipulator System Acceptance Test Plan (ATP) is to verify that the 4 glovebox sets of WRAP manipulator components, including rail/carriage, slave arm, master controller and auxiliary equipment, meets the requirements of the functional segments of 14590 specification. The demonstration of performance elements of the ATP are performed as a part of the Assembly specifications. Manipulator integration is integrated in the performance testing of the gloveboxes. Each requirement of the Assembly specification will be carried out in conjunction with glovebox performance tests.

  3. FY2008 Calibration Systems Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Cannon, Bret D.; Myers, Tanya L.; Broocks, Bryan T.

    2009-01-01

    The Calibrations project has been exploring alternative technologies for calibration of passive sensors in the infrared (IR) spectral region. In particular, we have investigated using quantum cascade lasers (QCLs) because these devices offer several advantages over conventional blackbodies such as reductions in size and weight while providing a spectral source in the IR with high output power. These devices can provide a rapid, multi-level radiance scheme to fit any nonlinear behavior as well as a spectral calibration that includes the fore-optics, which is currently not available for on-board calibration systems.

  4. Advanced Recovery Systems Wind Tunnel Test Report

    Science.gov (United States)

    1990-08-01

    120’ leg is basically an open circuit tunnel with a closed throat test section (Figure 4.1-1). The 135,000 horse power fan drive system is enough to... AMpAcs (c.g.) = WPACSL sin(ap + ,) This methodology was applied to all the data and the induced moment, due to the offset in the PACS c.g., was removed...around wires and cables . Figure 5.3-3 depicts the nomenclature for the Cross Flow Principle. To determine CD the following equations are used: Co1 = 1.10

  5. NASA's Space Launch System Progress Report

    Science.gov (United States)

    Singer, Joan A.; Cook, Jerry R.; Lyles, Garry M.; Beaman, David E.

    2011-01-01

    Exploration beyond Earth will be an enduring legacy for future generations, confirming America's commitment to explore, learn, and progress. NASA's Space Launch System (SLS) Program, managed at the Marshall Space Flight Center, is responsible for designing and developing the first exploration-class rocket since the Apollo Program's Saturn V that sent Americans to the Moon. The SLS offers a flexible design that may be configured for the MultiPurpose Crew Vehicle and associated equipment, or may be outfitted with a payload fairing that will accommodate flagship science instruments and a variety of high-priority experiments. Both options support a national capability that will pay dividends for future generations. Building on legacy systems, facilities, and expertise, the SLS will have an initial lift capability of 70 metric tons (mT) and will be evolvable to 130 mT. While commercial launch vehicle providers service the International Space Station market, this capability will surpass all vehicles, past and present, providing the means to do entirely new missions, such as human exploration of asteroids and Mars. With its superior lift capability, the SLS can expand the interplanetary highway to many possible destinations, conducting revolutionary missions that will change the way we view ourselves, our planet and its place in the cosmos. To perform missions such as these, the SLS will be the largest launch vehicle ever built. It is being designed for safety and affordability - to sustain our journey into the space age. Current plans include launching the first flight, without crew, later this decade, with crewed flights beginning early next decade. Development work now in progress is based on heritage space systems and working knowledge, allowing for a relatively quick start and for maturing the SLS rocket as future technologies become available. Together, NASA and the U.S. aerospace industry are partnering to develop this one-of-a-kind asset. Many of NASA's space

  6. Innovative technology summary report: Transportable vitrification system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    At the end of the cold war, many of the Department of Energy`s (DOE`s) major nuclear weapons facilities refocused their efforts on finding technically sound, economic, regulatory compliant, and stakeholder acceptable treatment solutions for the legacy of mixed wastes they had produced. In particular, an advanced stabilization process that could effectively treat the large volumes of settling pond and treatment sludges was needed. Based on this need, DOE and its contractors initiated in 1993 the EM-50 sponsored development effort required to produce a deployable mixed waste vitrification system. As a consequence, the Transportable Vitrification System (TVS) effort was undertaken with the primary requirement to develop and demonstrate the technology and associated facility to effectively vitrify, for compliant disposal, the applicable mixed waste sludges and solids across the various DOE complex sites. After 4 years of development testing with both crucible and pilot-scale melters, the TVS facility was constructed by Envitco, evaluated and demonstrated with surrogates, and then successfully transported to the ORNL ETTP site and demonstrated with actual mixed wastes in the fall of 1997. This paper describes the technology, its performance, the technology applicability and alternatives, cost, regulatory and policy issues, and lessons learned.

  7. Systemic mastocytosis: Case report with literature review

    Directory of Open Access Journals (Sweden)

    Mitrović Mirjana

    2012-01-01

    Full Text Available Introduction. Mastocytosis is a clonal neoplastic disorder of the mast cells. The clinical signs and symptoms of mastocytosis are heterogeneous ranging from indolent disease with a longterm survival to a highly aggressive neoplasm with survival of about 6 months. Systemic mastocytosis (SM is characterized by mastocyte infiltration of one or more organs, with or without skin involvment. Case Outline. The presented patient presents a highly challenging diagnostic and therapeutic case. A 46-year-old man was referred to our Centre due to the 7-year-long history of hepatosplenomegaly and mild thrombocytopenia. Ultrasound examination showed hepatosplenomegaly (liver 170 mm; spleen 200 mm, platelet count was 90Č109/L, serum tryptase level was elevated and bone marrow biopsy showed infiltration with mast cells (CD117, CD25 and mast cell tryptase positive. Our patient was diagnosed with aggressive systemic mastocytosis (SM according to WHO Classification (2008, although the clinical course of the disease was indolent, without complications for more than 7 years. Because of the ‘intermediate’ course, this patient was referred to as smouldering or intermediate SM and was not treated with cytostatics. Conclusion. Utilizing the established criteria, indolent SM can be discriminated from the aggressive subvariants of SM in most cases. However, a small group of patients, like our case belongs to the „grey zone“. Therapeutic approach to these patients is individual and prognosis is uncertain.

  8. Design of Low-Cost Impact Reporting System

    Science.gov (United States)

    Human form dummies may be used as targets in some types of training exercises. In order to assess performance on target, it may be necessary to know...the time and location of all impacts upon the targets. A sparring dummy can provide a desirable target as well as house an impact reporting system.A...low-cost, self-contained impact reporting system has been designed within the form factor of a sparring dummy . The design goal of this system was to

  9. Developmental Regression and Autism Reported to the Vaccine Adverse Event Reporting System

    Science.gov (United States)

    Woo, Emily Jane; Ball, Robert; Landa, Rebecca; Zimmerman, Andrew W.; Braun, M. Miles

    2007-01-01

    We report demographic and clinical characteristics of children reported to the US Vaccine Adverse Event Reporting System (VAERS) as having autism or another developmental disorder after vaccination. We completed 124 interviews with parents and reviewed medical records for 31 children whose records contained sufficient information to evaluate the…

  10. Physics of Correlated Systems, Final Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Greene, Chris H. [University of Colorado at Boulder

    2014-06-25

    The funding of this DOE project has enabled the P.I. and his collaborators to tackle a number of problems involving nonperturbatively coupled atomic systems, including their interactions with each other and/or with an external electromagnetic field of the type provided by either a continuous-wave or a femtosecond short-pulse laser. The progress includes a new, deeper understanding of an old and famous theory of autoionization lineshapes, developed initially by Ugo Fano in 1935 and later extended in a highly cited 1961 article; the new result specifically is that in a collaboration with the Heidelberg group we have been able to demonstrate an unexpectedly simple behavior in the time domain that is relevant for modern short-pulse lasers. This study also demonstrates a way to modify and even control the lineshapes of unstable atomic and molecular energy levels.

  11. Developing a user-centered voluntary medical incident reporting system.

    Science.gov (United States)

    Hua, Lei; Gong, Yang

    2010-01-01

    Medical errors are one of leading causes of death among adults in the United States. According to the Institute of Medicine, reporting of medical incidents could be a cornerstone to learn from errors and to improve patient safety, if incident data are collected in a properly structured format which is useful for the detection of patterns, discovery of underlying factors, and generation of solutions. Globally, a number of medical incident reporting systems were deployed for collecting observable incident data in care delivery organizations (CDO) over the past several years. However, few researches delved into design of user-centered reporting system for improving completeness and accuracy of medical incident collection, let alone design models created for other institutes to follow. In this paper, we introduce the problems identified in a current using voluntary reporting system and our effort is being made towards complete, accurate and useful user-centered new reporting system through a usability engineering process.

  12. CHEMICAL ANALYSES OF SODIUM SYSTEMS FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Greenhalgh, W. O.; Yunker, W. H.; Scott, F. A.

    1970-06-01

    BNWL-1407 summarizes information gained from the Chemical Analyses of Sodium Systems Program pursued by Battelle- Northwest over the period from July 1967 through June 1969. Tasks included feasibility studies for performing coulometric titration and polarographic determinations of oxygen in sodium, and the development of new separation techniques for sodium impurities and their subsequent analyses. The program was terminated ahead of schedule so firm conclusions were not obtained in all areas of the work. At least 40 coulometric titrations were carried out and special test cells were developed for coulometric application. Data indicated that polarographic measurements are theoretically feasible, but practical application of the method was not verified. An emission spectrographic procedure for trace metal impurities was developed and published. Trace metal analysis by a neutron activation technique was shown to be feasible; key to the success of the activation technique was the application of a new ion exchange resin which provided a sodium separation factor of 10{sup 11}. Preliminary studies on direct scavenging of trace metals produced no conclusive results.

  13. Implementation of a national electronic reporting system in Lithuania.

    Science.gov (United States)

    Domeika, M; Kligys, G; Ivanauskiene, O; Mereckiene, J; Bakasenas, V; Morkunas, B; Berescianskis, D; Wahl, T; Stenqvist, K

    2009-04-02

    Electronic reporting systems improve the quality and timeliness of the surveillance of communicable diseases. The aim of this paper is to present the process of the implementation and introduction of an electronic reporting system for the surveillance of communicable diseases in Lithuania. The project which started in 2002 was performed in collaboration between Lithuania and Sweden and was facilitated by the parallel process of adapting the surveillance system to European Union (EU) standards. The Lotus-based software, SmittAdm, was acquired from the Department of Communicable Diseases Control and Prevention of Stockholm County in Sweden and adopted for Lithuania, resulting in the Lithuanian software, ULISAS. A major advantage of this program for Lithuania was the possibility to work offline. The project was initiated in the two largest counties in Lithuania where ULISAS had been installed and put in use by January 2005. The introduction was gradual, the national level was connected to the system during late 2005, and all remaining counties were included during 2006 and 2007. The reporting system remains to be evaluated concerning timeliness and completeness of the surveillance. Further development is needed, for example the inclusion of all physicians and laboratories and an alert system for outbreaks. The introduction of this case-based, timely electronic reporting system in Lithuania allows better reporting of data to the European Centre for Disease Prevention and Control (ECDC) and the World Health Organization (WHO) compared to the former reporting system with paper-based, aggregated data.

  14. Discovering Recurring Anomalies in Text Reports Regarding Complex Space Systems

    Science.gov (United States)

    Zane-Ulman, Brett; Srivastava, Ashok N.

    2005-01-01

    Many existing complex space systems have a significant amount of historical maintenance and problem data bases that are stored in unstructured text forms. For some platforms, these reports may be encoded as scanned images rather than even searchable text. The problem that we address in this paper is the discovery of recurring anomalies and relationships between different problem reports that may indicate larger systemic problems. We will illustrate our techniques on data from discrepancy reports regarding software anomalies in the Space Shuttle. These free text reports are written by a number of different penp!e, thus the emphasis and wording varies considerably.

  15. Feasibility Study of Impact of the Proposed National Vocational Education Data Reporting and Accounting System (VEDS) Forms on Reporting Systems for Secondary Vocational Education in Wisconsin. Project Report.

    Science.gov (United States)

    Poehlmann, M. M.

    A study was conducted to determine the feasibility of implementing a reporting system, the National Vocational Education Reporting and Accounting System (VEDS), for secondary vocational education in Wisconsin. As proposed by the National Center for Educational Statistics, the VEDS system is a comprehensive information collection package to provide…

  16. What to do with healthcare Incident Reporting Systems

    Directory of Open Access Journals (Sweden)

    Julius Cuong Pham

    2013-12-01

    Full Text Available Incident Reporting Systems (IRS are and will continue to be an important influence on improving patient safety. They can provide valuable insights into how and why patients can be harmed at the organizational level. However, they are not the panacea that many believe them to be. They have several limitations that should be considered. Most of these limitations stem from inherent biases of voluntary reporting systems. These limitations include: i IRS can’t be used to measure safety (error rates; ii IRS can’t be used to compare organizations; iii IRS can’t be used to measure changes over time; iv IRS generate too many reports; v IRS often don’t generate in-depth analyses or result in strong interventions to reduce risk; vi IRS are associated with costs. IRS do offer significant value; their value is found in the following: i IRS can be used to identify local system hazards; ii IRS can be used to aggregate experiences for uncommon conditions; iii IRS can be used to share lessons within and across organizations; iv IRS can be used to increase patient safety culture. Moving forward, several strategies are suggested to maximize their value: i make reporting easier; ii make reporting meaningful to the reporter; iii make the measure of success system changes, rather than events reported; iv prioritize which events to report and investigate, report and investigate them well; v convene with diverse stakeholders to enhance the value of IRS.

  17. Status Report on Power System Transformation: A 21st Century Power Partnership Report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mackay [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Martinot, Eric [Beijing Inst. of Technology (China); Cox, Sadie [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Speer, Bethany [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zinaman, Owen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Booth, Sam [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zissler, Romain [Japan Renewable Energy Foundation (Japan); Cochran, Jaquelin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Soonee, S. K. [Power System Operation Corporation, Ltd (India); Audinet, Pierre [World Bank Energy Sector Management Assistance Program, Washington, DC (United States); Munuera, Luis [International Energy Agency, Paris (France); Arent, Doug [Joint Inst. for Strategic Energy Analysis, Washington, DC (United States)

    2015-05-27

    This report has three primary goals: (1) to articulate the concept of power system transformation; (2) to explore the current global landscape of ‘innovations’ that constitute power system transformation and provide evidence of how these innovations are emerging; and (3) to suggest an analytical framework for assessing the status of power system transformation on an on-going basis.

  18. Recommendation Report: EJournals/EBooks A-Z Management System

    KAUST Repository

    Ramli, Rindra M.

    2014-01-01

    This is a recommendation report for KAUST Library on the Ejournals / EBooks AZ Management systems project. It briefly described the issues faced by the ERM Team, project plan overview and the project findings as well as the recommendation(s).

  19. National Wildlife Refuge System : Strategic Workforce Planning Report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of this report is to describe the current and future workforce challenges and workforce development efforts underway by the Refuge System to address...

  20. Implementing agreement on photovoltaic power systems - Annual report 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2007. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications, hybrid systems within mini-grids and PV environmental health and safety activities. The status and prospects in the 22 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  1. Implementing agreement on photovoltaic power systems - Annual report 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2008. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications, hybrid systems within mini-grids as well as health and safety activities. The status and prospects in the 23 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the performance, reliability and analysis of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  2. Implementing agreement on photovoltaic power systems - Annual report 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2006. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications and hybrid systems within mini-grids. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  3. Research on Intelligence Word Reporting System based on Tags

    Institute of Scientific and Technical Information of China (English)

    Jingjing Sun; Jianliang Xu; Lintao Du

    2012-01-01

      The function of the Word tags(content controls)is binding to a data sources through the tags,and displaying the data in the document.When the data source is updated,the content control will reflect the change.Traditional report design deals with a lot of statement drawing and data fillings.It makes the program to huge,and the interactivity between report and program is poor.Word is powerful office software, using it we can produce all kinds of complex format reports.This paper using the Oceans Samples Repository Information database as data sources,research an Intelligent Word Reporting System which allows self-defined complex format report based on tags, and discusses the technical advantages of intelligent Word reporting system.

  4. Descriptive analysis of medication errors reported to the Egyptian national online reporting system during six months.

    Science.gov (United States)

    Shehata, Zahraa Hassan Abdelrahman; Sabri, Nagwa Ali; Elmelegy, Ahmed Abdelsalam

    2016-03-01

    This study analyzes reports to the Egyptian medication error (ME) reporting system from June to December 2014. Fifty hospital pharmacists received training on ME reporting using the national reporting system. All received reports were reviewed and analyzed. The pieces of data analyzed were patient age, gender, clinical setting, stage, type, medication(s), outcome, cause(s), and recommendation(s). Over the course of 6 months, 12,000 valid reports were gathered and included in this analysis. The majority (66%) came from inpatient settings, while 23% came from intensive care units, and 11% came from outpatient departments. Prescribing errors were the most common type of MEs (54%), followed by monitoring (25%) and administration errors (16%). The most frequent error was incorrect dose (20%) followed by drug interactions, incorrect drug, and incorrect frequency. Most reports were potential (25%), prevented (11%), or harmless (51%) errors; only 13% of reported errors lead to patient harm. The top three medication classes involved in reported MEs were antibiotics, drugs acting on the central nervous system, and drugs acting on the cardiovascular system. Causes of MEs were mostly lack of knowledge, environmental factors, lack of drug information sources, and incomplete prescribing. Recommendations for addressing MEs were mainly staff training, local ME reporting, and improving work environment. There are common problems among different healthcare systems, so that sharing experiences on the national level is essential to enable learning from MEs. Internationally, there is a great need for standardizing ME terminology, to facilitate knowledge transfer. Underreporting, inaccurate reporting, and a lack of reporter diversity are some limitations of this study. Egypt now has a national database of MEs that allows researchers and decision makers to assess the problem, identify its root causes, and develop preventive strategies. © The Author 2015. Published by Oxford University

  5. Forest Resource Information System. Phase 3: System transfer report

    Science.gov (United States)

    Mroczynski, R. P. (Principal Investigator)

    1981-01-01

    Transfer of the forest reserve information system (FRIS) from the Laboratory for Applications of Remote Sensing to St. Regis Paper Company is described. Modifications required for the transfer of the LARYS image processing software are discussed. The reformatting, geometric correction, image registration, and documentation performed for preprocessing transfer are described. Data turnaround was improved and geometrically corrected and ground-registered CCT LANDSAT 3 data provided to the user. The technology transfer activities are summarized. An application test performed in order to assess a Florida land acquisition is described. A benefit/cost analysis of FRIS is presented.

  6. Engineered Barrier System performance requirements systems study report. Revision 02

    Energy Technology Data Exchange (ETDEWEB)

    Balady, M.A.

    1997-01-14

    This study evaluates the current design concept for the Engineered Barrier System (EBS), in concert with the current understanding of the geologic setting to assess whether enhancements to the required performance of the EBS are necessary. The performance assessment calculations are performed by coupling the EBS with the geologic setting based on the models (some of which were updated for this study) and assumptions used for the 1995 Total System Performance Assessment (TSPA). The need for enhancements is determined by comparing the performance assessment results against the EBS related performance requirements. Subsystem quantitative performance requirements related to the EBS include the requirement to allow no more than 1% of the waste packages (WPs) to fail before 1,000 years after permanent closure of the repository, as well as a requirement to control the release rate of radionuclides from the EBS. The EBS performance enhancements considered included additional engineered components as well as evaluating additional performance available from existing design features but for which no performance credit is currently being taken.

  7. Implementing agreement on photovoltaic power systems - Annual report 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2005. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries and urban-scale PV applications. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  8. Implementing agreement on photovoltaic power systems - Annual report 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2000. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed. Status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the operational performance and design of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, the grid interconnection of building-integrated and other distributed photovoltaic power systems, photovoltaic power systems in the built environment, very large scale photovoltaic power generation systems and the deployment of photovoltaic technologies in developing countries. The status and prospects in the 20 countries participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. The report is completed with a list of Executive Committee members and Operating Agents.

  9. Implementing agreement on photovoltaic power systems - Annual report 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2003. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed. The programme's tenth anniversary is noted. Status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the operational performance, maintenance and sizing of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, photovoltaic power systems in the built environment, a study on very large scale photovoltaic power generation system, the deployment of photovoltaic technologies in developing countries and urban-scale PV applications. The status and prospects in the 20 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. The report is completed with a list of Executive Committee members and Operating Agents.

  10. Implementing agreement on photovoltaic power systems - Annual report 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2001. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed. Status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the operational performance, maintenance and sizing of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, photovoltaic power systems in the built environment, a study on very large scale photovoltaic power generation system and the deployment of photovoltaic technologies in developing countries. The status and prospects in the 20 countries participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. The report is completed with a list of Executive Committee members and Operating Agents.

  11. Implementing agreement on photovoltaic power systems - Annual report 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2004. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries and urban-scale PV applications. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  12. INL Control System Situational Awareness Technology Annual Report 2012

    Energy Technology Data Exchange (ETDEWEB)

    Gordon Rueff; Bryce Wheeler; Todd Vollmer; Tim McJunkin; Robert Erbes

    2012-10-01

    The overall goal of this project is to develop an interoperable set of tools to provide a comprehensive, consistent implementation of cyber security and overall situational awareness of control and sensor network implementations. The operation and interoperability of these tools will fill voids in current technological offerings and address issues that remain an impediment to the security of control systems. This report provides an FY 2012 update on the Sophia, Mesh Mapper, Intelligent Cyber Sensor, and Data Fusion projects with respect to the year-two tasks and annual reporting requirements of the INL Control System Situational Awareness Technology report (July 2010).

  13. Operational test report for 2706-T complex liquid transfer system

    Energy Technology Data Exchange (ETDEWEB)

    BENZEL, H.R.

    1999-09-01

    This document is the Operational Test Report (OTR). It enters the Record Copy of the W-259 Operational Test Procedure (HNF-3610) into the document retrieval system. Additionally, the OTR summarizes significant issues associated with testing the 2706-T waste liquid transfer and storage system.

  14. Utility Battery Storage Systems Program report for FY93

    Energy Technology Data Exchange (ETDEWEB)

    Butler, P.C.

    1994-02-01

    Sandia National Laboratories, New Mexico, conducts the Utility Battery Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Energy Management. In this capacity, Sandia is responsible for the engineering analyses, contract development, and testing of rechargeable batteries and systems for utility-energy-storage applications. This report details the technical achievements realized during fiscal year 1993.

  15. A Novel Reporting System to Improve Accuracy in Appendicitis Imaging

    Science.gov (United States)

    Godwin, Benjamin D.; Drake, Frederick T.; Simianu, Vlad V.; Shriki, Jabi E.; Hippe, Daniel S.; Dighe, Manjiri; Bastawrous, Sarah; Cuevas, Carlos; Flum, David; Bhargava, Puneet

    2015-01-01

    OBJECTIVE The purpose of this study was to ascertain if standardized radiologic reporting for appendicitis imaging increases diagnostic accuracy. MATERIALS AND METHODS We developed a standardized appendicitis reporting system that includes objective imaging findings common in appendicitis and a certainty score ranging from 1 (definitely not appendicitis) through 5 (definitely appendicitis). Four radiologists retrospectively reviewed the preoperative CT scans of 96 appendectomy patients using our reporting system. The presence of appendicitis-specific imaging findings and certainty scores were compared with final pathology. These comparisons were summarized using odds ratios (ORs) and the AUC. RESULTS The appendix was visualized on CT in 89 patients, of whom 71 (80%) had pathologically proven appendicitis. Imaging findings associated with appendicitis included appendiceal diameter (odds ratio [OR] = 14 [> 10 vs appendicitis. In this initially indeterminate group, using the standardized reporting system, radiologists assigned higher certainty scores (4 or 5) in 21 of the 28 patients with appendicitis (75%) and lower scores (1 or 2) in five of the seven patients without appendicitis (71%) (AUC = 0.90; p = 0.001). CONCLUSION Standardized reporting and grading of objective imaging findings correlated well with postoperative pathology and may decrease the number of CT findings reported as indeterminate for appendicitis. Prospective evaluation of this reporting system on a cohort of patients with clinically suspected appendicitis is currently under way. PMID:26001230

  16. Using patient reports to measure health care system performance.

    Science.gov (United States)

    Hargraves, J L; Palmer, R H; Zapka, J; Nerenz, D; Frazier, H; Orav, E J; Warner, C; Ingard, J; Neisuler, R

    1993-01-01

    We developed a self-administered patient questionnaire that asks for data concerning the time to receive services (access to care), communication between providers (coordination of care), and follow up after tests and treatment (continuity of care). From these data, we construct rates of performance about the clinical management systems that support provision of these services. Rates of system performance are calculated for indicators using patients' responses to survey questions. These indicators add the number of patients reporting a problem of those patients who have encountered a particular clinical management system. Information derived from 3000 patient questionnaires is matched with data abstracted from health care medical records. The sensitivity and specificity of patient reports are being evaluated for all indicators classified as gold standards for medical records. Indicators considered gold standard items for patient reports are matched for agreement with any information contained in the medical record. Also, patient characteristics associated with accurate reporting is to be assessed using multivariate logistic regression models.

  17. Canada's Adverse Drug Reaction Reporting System: A Failing Grade.

    Science.gov (United States)

    Rawson, Nigel S B

    2015-01-01

    An article in the National Post on suicidal effects associated with varenicline (Champix) highlights deficiencies in the Canadian spontaneous reporting system (SRS) for adverse drug reactions (ADRs). The issues of under-reporting, poor quality information, duplication of reports and lack of a population denominator of drug use are discussed. Canada's SRS is deficient. There are immediate and medium-term actions that could be instituted that would improve pharmacovigilance in Canada. However, education about appropriate prescribing, the recognition of ADRs, and the duty to report them is a key long-term strategy to improving the pharmacovigilance system and should be included at every opportunity in the training of healthcare professionals so that life-long habits are developed. In addition to changes at Health Canada, greater emphasis needs to be placed on training in therapeutics, understanding drug safety, and the responsibility of healthcare providers in reporting risks in the curricula of medical and nursing schools.

  18. Utility battery storage systems program report for FY 94

    Energy Technology Data Exchange (ETDEWEB)

    Butler, P.C.

    1995-03-01

    Sandia National Laboratories, New Mexico, conducts the Utility Battery Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Energy Management. The goal of this program is to assist industry in developing cost-effective battery systems as a utility resource option by 2000. Sandia is responsible for the engineering analyses, contracted development, and testing of rechargeable batteries and systems for utility energy storage applications. This report details the technical achievements realized during fiscal year 1994.

  19. Utility battery storage systems program report for FY 94

    Energy Technology Data Exchange (ETDEWEB)

    Butler, P.C.

    1995-03-01

    Sandia National Laboratories, New Mexico, conducts the Utility Battery Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Energy Management. The goal of this program is to assist industry in developing cost-effective battery systems as a utility resource option by 2000. Sandia is responsible for the engineering analyses, contracted development, and testing of rechargeable batteries and systems for utility energy storage applications. This report details the technical achievements realized during fiscal year 1994.

  20. Energy storage systems program report for FY1996

    Energy Technology Data Exchange (ETDEWEB)

    Butler, P.C.

    1997-05-01

    Sandia National Laboratories, New Mexico, conducts the Energy Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Utility Technologies. The goal of this program is to assist industry in developing cost-effective energy storage systems as a resource option by 2000. Sandia is responsible for the engineering analyses, contracted development, and testing of energy storage systems for stationary applications. This report details the technical achievements realized during fiscal year 1996.

  1. Power plant system assessment. Final report. SP-100 Program

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R.V.; Atkins, D.F.; Bost, D.S.; Berman, B.; Clinger, D.A.; Determan, W.R.; Drucker, G.S.; Glasgow, L.E.; Hartung, J.A.; Harty, R.B.

    1983-10-31

    The purpose of this assessment was to provide system-level insights into 100-kWe-class space reactor electric systems. Using these insights, Rockwell was to select and perform conceptual design studies on a ''most attractive'' system that met the preliminary design goals and requirements of the SP-100 Program. About 4 of the 6 months were used in the selection process. The remaining 2 months were used for the system conceptual design studies. Rockwell completed these studies at the end of FY 1983. This report summarizes the results of the power plant system assessment and describes our choice for the most attractive system - the Rockwell SR-100G System (Space Reactor, 100 kWe, Growth) - a lithium-cooled UN-fueled fast reactor/Brayton turboelectric converter system.

  2. Implementing agreement on photovoltaic power systems - Annual report 2009

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2009. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented, as are activities planned for 2010. The tasks include the exchange and dissemination of information on photovoltaic power systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications, hybrid systems within mini-grids, PV environmental health and safety activities, performance and reliability of PV systems and high penetration PV in electricity grids. The status and prospects in the 23 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the performance, reliability and analysis of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  3. 77 FR 18689 - Changes to Standard Numbering System, Vessel Identification System, and Boating Accident Report...

    Science.gov (United States)

    2012-03-28

    ..., Federal, State, and local law enforcement personnel use SNS information from the States' numbering systems... enforcement personnel use SNS information from the States' numbering systems for enforcement of boating laws... Standard Numbering System (SNS), the Vessel Identification System, and accident reporting; require...

  4. Advanced Supermarket Refrigeration - Heat Recovery Systems. Annex 26. Final report. Volume 2. Country reports

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-04-01

    Annex 26 has produced three deliverables: (1) Workshop (October 2000) proceedings Stockholm, Sweden, on CD-ROM (HPP-AN26-1); (2) Final report, Volume 1, Executive Summary, as report (HPP-AN26-2); and (3) Final report, Volume 2, Country reports (described in this record). Each of these reports, available from the HPC, provide valuable information for practitioners (designers, installers) and manufacturers of supermarket refrigeration systems. Annex 26 is the first international project under the IEA Heat Pump Programme that links refrigeration and heat pump technology. Recovering heat from advanced supermarket refrigeration systems for space and water heating purposes seems obvious and is beneficial for owners and operators. Because there are world-wide a great number of supermarkets that offer frozen and chilled food and further growth of this sector may be expected, the amount of energy used for refrigeration is enormous and will likely increase substantially in the near future. Annex 26 analysed several advanced supermarket refrigeration systems and came to remarkable conclusions as far as energy conservation and TEWI reduction is concerned. The conclusions justify that advanced supermarket systems with heat recovery should receive great attention and support. And there is still further research needed in several areas. The Annex also included a thorough system cost analyses and proposals for cost reductions are given.

  5. Final report for TMX-U systems support

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    This final report is for the TMX-U RF systems development subcontract with Lawrence Livermore National Laboratory (LLNL). This program was initiated on July 1, 1983 and extended through September 30, 1985. This program was concerned with the development of RF systems to meet the objectives of the TMX-U mirror program at LLNL. To accomplish this the following areas were studied during the course of this contract: (1) Ion Cyclotron Heating, (2) Electron Cyclotron Heating, (3) Drift Pumping, (4) Plasma Modeling, (5) Neutral Beam Heating, and (6) Neutral Gas transport and fueling. The key results of these activities are reported.

  6. Development of signal processing at multi-sampling rates%多采样率信号处理的发展

    Institute of Scientific and Technical Information of China (English)

    万伟程; 李艳华; 周三文

    2014-01-01

    数字通信系统中,为适应传输、降低资源消耗、适于处理操作,常需要变换信号的采样率。多采样率信号处理理论从语音信号处理中发展起来,在应用中不断丰富。随着软件无线电的应用,多采样率变换在数字信号领域占据越来越重要的地位。多采样率信号处理技术与小波分析、分数阶傅里叶变换等其他信号处理技术相结合是未来发展的方向。%The sampling rate of signal often needs to be changed for fitting transmission,reducing resource consumption and suiting process handling in digital communication system. Multirate signal processing theory arose from speech signal pro-cessing and was enriched in application. Multirate signal processing plays an important role in digital signal processing with the application of software radio. It′s a tendency of combining the multirate signal processing with wavelet analysis and fractional Fourier transform.

  7. Space Systems Technology Working Group. Executive Report. Revision

    Science.gov (United States)

    1994-09-01

    technologies associated with VI &I LT protecting or hardening these systems * REDUCE VULNERABILfTY BYBEING HARD TO as they perform designated missions...copy O3 of 100 AD-A285 778 IDA DOCUMENT D-1519 (Revised) EXECUTIVE REPORT SPACE SYSTEMS TECHNOLOGY WORKING GROUP TECHNOLOGY WORKING GP.OUP CO...ADVISOR ELECTE - L. Kirk Lewis • OCT1 Institute for Defense Analyses D9 Norman D. Jorstad G Director, Technology Identification and Analyses Center

  8. LCLS XTOD Tunnel Vacuum Transport System (XVTS) Final Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Shen, S

    2006-10-16

    The design of the X-Ray Vacuum Transport System (XVTS) for the Linac Coherent Light Source (LCLS) X-ray Transport, Optics and Diagnostics (XTOD) system has been analyzed and configured by the Lawrence Livermore National Laboratory's New Technologies Engineering Division (NTED) as requested by the SLAC/LCLS program. A preliminary design review was held on 11/14/05 [1][2]. This FDR (Final Design Report) presents system configuration, detailed analyses and selection of the mechanical and electrical components for the XTOD tunnel section, as well as the response to all issues raised in the review committee report. Also included are the plans for procurement, mechanical integration, schedule and the cost estimates. It should be noticed that, after the XVTS PDR, LCLS management has decided to lower the number of beamlines from three to one, and shorten the tunnel length from 212 m to 184 m. [3][4] The final design of XVTS system is completed. The major subjects presented in this report are: (1) Design of the complete system. (2) System analysis results. (3) ES&H issues and plan. (4) Project cost estimates and schedule.

  9. System Advisor Model: Flat Plate Photovoltaic Performance Modeling Validation Report

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, J.; Whitmore, J.; Kaffine, L.; Blair, N.; Dobos, A. P.

    2013-12-01

    The System Advisor Model (SAM) is a free software tool that performs detailed analysis of both system performance and system financing for a variety of renewable energy technologies. This report provides detailed validation of the SAM flat plate photovoltaic performance model by comparing SAM-modeled PV system generation data to actual measured production data for nine PV systems ranging from 75 kW to greater than 25 MW in size. The results show strong agreement between SAM predictions and field data, with annualized prediction error below 3% for all fixed tilt cases and below 8% for all one axis tracked cases. The analysis concludes that snow cover and system outages are the primary sources of disagreement, and other deviations resulting from seasonal biases in the irradiation models and one axis tracking issues are discussed in detail.

  10. Oak Ridge Reservation Public Warning Siren System Annual Test Report

    Energy Technology Data Exchange (ETDEWEB)

    R. F. Gee

    2000-10-01

    The full operational test of the Oak Ridge Reservation (ORR) Public Warning Siren System (PWSS) was successfully conducted on September 27, 2000. The annual test is a full-scale sounding of the individual siren systems around each of the three Department of Energy (DOE) sites in Oak Ridge, Tennessee. The purpose of the annual test is to demonstrate and validate the siren systems' ability to alert personnel outdoors in the Immediate Notification Zones (INZ) (approximately two miles) around each site. The success of this test is based on two critical functions of the siren system. The first function is system operability. The system is considered operable if 90% of the sirens are operational. System diagnostics and direct field observations were used to validate the operability of the siren systems. Based on the diagnostic results and field observations, greater than 90% of the sirens were considered operational. The second function is system audibility. The system is considered audible if the siren could be heard in the immediate notification zones around each of the three sites. Direct field observations, along with sound level measurements, were used to validate the audibility of the siren system. Based on the direct field observations and sound level measurements, the siren system was considered audible. The combination of field observations, system diagnostic status reports, and sound level measurements provided a high level of confidence that the system met and would meet operational requirements upon demand. As part of the overall system test, the Tennessee Emergency Management Agency (TEMA) activated the Emergency Alerting System (EAS), which utilized area radio stations to make announcements regarding the test and to remind residents of what to do in the event of an actual emergency.

  11. Technology verification phase. Dynamic isotope power system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Halsey, D.G.

    1982-03-10

    The Phase I requirements of the Kilowatt Isotope Power System (KIPS) program were to make a detailed Flight System Conceptual Design (FSCD) for an isotope fueled organic Rankine cycle power system and to build and test a Ground Demonstration System (GDS) which simulated as closely as possible the operational characteristics of the FSCD. The activities and results of Phase II, the Technology Verification Phase, of the program are reported. The objectives of this phase were to increase system efficiency to 18.1% by component development, to demonstrate system reliability by a 5000 h endurance test and to update the flight system design. During Phase II, system performance was improved from 15.1% to 16.6%, an endurance test of 2000 h was performed while the flight design analysis was limited to a study of the General Purpose Heat Source, a study of the regenerator manufacturing technique and analysis of the hardness of the system to a laser threat. It was concluded from these tests that the GDS is basically prototypic of a flight design; all components necessary for satisfactory operation were demonstrated successfully at the system level; over 11,000 total h of operation without any component failure attested to the inherent reliability of this type of system; and some further development is required, specifically in the area of performance. (LCL)

  12. Automated Energy Distribution and Reliability System Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Buche, D. L.; Perry, S.

    2007-10-01

    This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects.

  13. Nutrition Counts. Massachusetts Nutrition Surveillance System. FY90 Annual Report.

    Science.gov (United States)

    Wiecha, Jean L.; And Others

    "Nutrition Counts," the pediatric portion of the Massachusetts Department of Public Health's (MDPH) Nutrition Surveillance System, monitors and describes aspects of nutritional status among groups of young children in the state. This report presents cross-sectional data describing 5,176 infants and young children in Massachusetts. Of these, 3,181…

  14. Comprehensive Plan, Report #5. Fort Lincoln New Town Education System.

    Science.gov (United States)

    General Learning Corp., Washington, DC.

    This is the final report of the General Learning Corporation's planning effort for the Fort Lincoln New Town school system. Designed as a "Comprehensive Plan", it summarizes the educational plans developed to date, and presents some new elements of planning while it serves to "tie together" all previous planning to provide the reader with a broad…

  15. Automated Energy Distribution and Reliability System (AEDR): Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Buche, D. L.

    2008-07-01

    This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects.

  16. Hypoxia-sensitive reporter system for high-throughput screening.

    Science.gov (United States)

    Tsujita, Tadayuki; Kawaguchi, Shin-ichi; Dan, Takashi; Baird, Liam; Miyata, Toshio; Yamamoto, Masayuki

    2015-01-01

    The induction of anti-hypoxic stress enzymes and proteins has the potential to be a potent therapeutic strategy to prevent the progression of ischemic heart, kidney or brain diseases. To realize this idea, small chemical compounds, which mimic hypoxic conditions by activating the PHD-HIF-α system, have been developed. However, to date, none of these compounds were identified by monitoring the transcriptional activation of hypoxia-inducible factors (HIFs). Thus, to facilitate the discovery of potent inducers of HIF-α, we have developed an effective high-throughput screening (HTS) system to directly monitor the output of HIF-α transcription. We generated a HIF-α-dependent reporter system that responds to hypoxic stimuli in a concentration- and time-dependent manner. This system was developed through multiple optimization steps, resulting in the generation of a construct that consists of the secretion-type luciferase gene (Metridia luciferase, MLuc) under the transcriptional regulation of an enhancer containing 7 copies of 40-bp hypoxia responsive element (HRE) upstream of a mini-TATA promoter. This construct was stably integrated into the human neuroblastoma cell line, SK-N-BE(2)c, to generate a reporter system, named SKN:HRE-MLuc. To improve this system and to increase its suitability for the HTS platform, we incorporated the next generation luciferase, Nano luciferase (NLuc), whose longer half-life provides us with flexibility for the use of this reporter. We thus generated a stably transformed clone with NLuc, named SKN:HRE-NLuc, and found that it showed significantly improved reporter activity compared to SKN:HRE-MLuc. In this study, we have successfully developed the SKN:HRE-NLuc screening system as an efficient platform for future HTS.

  17. Simulated coal gas MCFC power plant system verification. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-30

    The objective of the main project is to identify the current developmental status of MCFC systems and address those technical issues that need to be resolved to move the technology from its current status to the demonstration stage in the shortest possible time. The specific objectives are separated into five major tasks as follows: Stack research; Power plant development; Test facilities development; Manufacturing facilities development; and Commercialization. This Final Report discusses the M-C power Corporation effort which is part of a general program for the development of commercial MCFC systems. This final report covers the entire subject of the Unocal 250-cell stack. Certain project activities have been funded by organizations other than DOE and are included in this report to provide a comprehensive overview of the work accomplished.

  18. Utility battery storage systems. Program report for FY95

    Energy Technology Data Exchange (ETDEWEB)

    Butler, P.C.

    1996-03-01

    Sandia National Laboratories, New Mexico, conducts the Utility Battery Storage Systems Program, which is sponsored by the U.S. Department of Energy`s Office of Utility Technologies. The goal of this program is to assist industry in developing cost-effective battery systems as a utility resource option by 2000. Sandia is responsible for the engineering analyses, contracted development, and testing of rechargeable batteries and systems for utility energy storage applications. This report details the technical achievements realized during fiscal year 1995.

  19. Energy Storage Systems Program Report for FY99

    Energy Technology Data Exchange (ETDEWEB)

    BOYES,JOHN D.

    2000-06-01

    Sandia National Laboratories, New Mexico, conducts the Energy Storage Systems Program, which is sponsored by the US Department of Energy's Office of Power Technologies. The goal of this program is to develop cost-effective electric energy storage systems for many high-value stationary applications in collaboration with academia and industry. Sandia National Laboratories is responsible for the engineering analyses, contracted development, and testing of energy storage components and systems. This report details the technical achievements realized during fiscal year 1999.

  20. Energy Storage Systems Program Report for FY98

    Energy Technology Data Exchange (ETDEWEB)

    Butler, P.C.

    1999-04-01

    Sandia National Laboratories, New Mexico, conducts the Energy Storage Systems Program, which is sponsored by the U.S. Department of Energy's Office of Power Technologies. The goal of this program is to collaborate with industry in developing cost-effective electric energy storage systems for many high-value stationary applications. Sandia National Laboratories is responsible for the engineering analyses, contracted development and testing of energy storage components and systems. This report details the technical achievements realized during fiscal year 1998.

  1. Energy storage systems program report for FY97

    Energy Technology Data Exchange (ETDEWEB)

    Butler, P.C.

    1998-08-01

    Sandia National Laboratories, New Mexico, conducts the Energy Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Utility Technologies. The goal of this program is to collaborate with industry in developing cost-effective electric energy storage systems for many high-value stationary applications. Sandia National Laboratories is responsible for the engineering analyses, contracted development, and testing of energy storage components and systems. This report details the technical achievements realized during fiscal year 1997. 46 figs., 20 tabs.

  2. Evaluation of the Kloswall longwall mining system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1982-04-01

    This report presents the results of design studies and critical requiremental tests of a new longwall mining system specifically designed to extract a very deep web (48 inches or deeper) from a longwall panel. The report includes a productivity and cost analysis comparing the new mining system with a conventional longwall operation taking a 30-inch wide web. The analysis shows the new system will increase annual production and return on investment in most cases. The report also includes conceptual drawings and specifications for a high capacity three-drum shearer and a unique shield type of roof support specifically designed for very wide web operation. The advantages and problems associated with wide web mining are discussed in general and as they relate specifically to the equipment selected for the new mining system. Details of the critical testing and the test results are presented. The study concludes by recommending that surface tests of the haulage and guidance system be conducted as the follow-on work.

  3. Report on emergency electrical power supply systems for nuclear fuel cycle and reactor facilities security systems

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    The report includes information that will be useful to those responsible for the planning, design and implementation of emergency electric power systems for physical security and special nuclear materials accountability systems. Basic considerations for establishing the system requirements for emergency electric power for security and accountability operations are presented. Methods of supplying emergency power that are available at present and methods predicted to be available in the future are discussed. The characteristics of capacity, cost, safety, reliability and environmental and physical facility considerations of emergency electric power techniques are presented. The report includes basic considerations for the development of a system concept and the preparation of a detailed system design.

  4. Brayton isotope power system, phase I. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1978-07-28

    The Phase I program resulted in the development and ground demonstration of a dynamic power conversion system. The two key contractual objectives of 25% conversion efficiency and 1000 h of endurance testing were successfully met. As a result of the Phase I effort, the BIPS is a viable candidate for further development into a flight system capable of sustained operation in space. It represents the only known dynamic space power system to demonstrate the performance and endurance coupled with the simplicity necessary for reliable operation. This final report follows thirty-five monthly reports. For expediency, it makes liberal use of referenced documents which have been submitted to DOE during the course of the program.

  5. Foundational Report Series: Advanced Distribution Management Systems for Grid Modernization

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jianhui [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-01

    This report describes the application functions for distribution management systems (DMS). The application functions are those surveyed by the IEEE Power and Energy Society’s Task Force on Distribution Management Systems. The description of each DMS application includes functional requirements and the key features and characteristics in current and future deployments, as well as a summary of the major benefits provided by each function to stakeholders — from customers to shareholders. Due consideration is paid to the fact that the realizable benefits of each function may differ by type of utility, whether investor-owned, cooperative, or municipal. This report is sufficient to define the functional requirements of each application for system procurement (request-for-proposal [RFP]) purposes and for developing preliminary high-level use cases for those functions. However, it should not be considered a design document that will enable a vendor or software developer to design and build actual DMS applications.

  6. Design review report for the SY-101 RAPID mitigation system

    Energy Technology Data Exchange (ETDEWEB)

    SCHLOSSER, R.L.

    1999-05-24

    This report documents design reviews conducted of the SY-101 Respond And Pump In Days (RAPID) Mitigation System. As part of the SY-101 Surface-Level-Rise Remediation Project, the SY-101 WID Mitigation System will reduce the potential unacceptable consequences of crust growth in Tank 241-SY-101 (SY-101). Projections of the crust growth rate indicate that the waste level in the tank may reach the juncture of the primary and secondary confinement structures of the tank late in 1999. Because of this time constraint, many design activities are being conducted in parallel and design reviews were conducted for system adequacy as well as design implementation throughout the process. Design implementation, as used in this design review report, is the final component selection (e.g., which circuit breaker, valve, or thermocouple) that meets the approved design requirements, system design, and design and procurement specifications. Design implementation includes the necessary analysis, testing, verification, and qualification to demonstrate compliance with the system design and design requirements. Design implementation is outside the scope of this design review. The design activities performed prior to detailed design implementation (i.e., system mission requirements, functional design requirements, technical criteria, system conceptual design, and where design and build contracts were placed, the procurement specification) have been reviewed and are within the scope of this design review report. Detailed design implementation will be controlled, reviewed, and where appropriate, approved in accordance with Tank Waste Remediation System (TWRS) engineering procedures. Review of detailed design implementation will continue until all components necessary to perform the transfer function are installed and tested.

  7. Preoperational test report, primary ventilation condenser cooling system

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, F.T.

    1997-10-29

    This represents the preoperational test report for the Primary Ventilation Condenser Cooling System, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The system uses a closed chilled water piping loop to provide offgas effluent cooling for tanks AY101, AY102, AZ1O1, AZ102; the offgas is cooled from a nominal 100 F to 40 F. Resulting condensation removes tritiated vapor from the exhaust stack stream. The piping system includes a package outdoor air-cooled water chiller with parallel redundant circulating pumps; the condenser coil is located inside a shielded ventilation equipment cell. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System.

  8. BI Reporting, Data Warehouse Systems, and Beyond. CDS Spotlight Report. Research Bulletin

    Science.gov (United States)

    Lang, Leah; Pirani, Judith A.

    2014-01-01

    This Spotlight focuses on data from the 2013 Core Data Service [CDS] to better understand how higher education institutions approach business intelligence (BI) reporting and data warehouse systems (see the Sidebar for definitions). Information provided for this Spotlight was derived from Module 8 of CDS, which contains several questions regarding…

  9. BI Reporting, Data Warehouse Systems, and Beyond. CDS Spotlight Report. Research Bulletin

    Science.gov (United States)

    Lang, Leah; Pirani, Judith A.

    2014-01-01

    This Spotlight focuses on data from the 2013 Core Data Service [CDS] to better understand how higher education institutions approach business intelligence (BI) reporting and data warehouse systems (see the Sidebar for definitions). Information provided for this Spotlight was derived from Module 8 of CDS, which contains several questions regarding…

  10. E-Business Reporting: Towards a Global Standard for Financial Reporting Systems Using XBRL

    Science.gov (United States)

    Long, Margaret J.

    2013-01-01

    Reporting systems can provide transparency into financial markets necessary for a sustainable, prosperous global economy. The most widely used global platform for exchanging electronic information about companies to regulatory bodies is XBRL. Standards for this platform are in the process of becoming legally harmonized, but not all countries are…

  11. E-Business Reporting: Towards a Global Standard for Financial Reporting Systems Using XBRL

    Science.gov (United States)

    Long, Margaret J.

    2013-01-01

    Reporting systems can provide transparency into financial markets necessary for a sustainable, prosperous global economy. The most widely used global platform for exchanging electronic information about companies to regulatory bodies is XBRL. Standards for this platform are in the process of becoming legally harmonized, but not all countries are…

  12. Technical Evaluation Report 14: Chat and Instant Messaging Systems (synchronous): Report 2/ 3

    OpenAIRE

    Ellen Kinsel; Merv Roy; Hartley Waldman; Donna (M. M.) Woloschuk; Patrick J. Fahy

    2002-01-01

    This study extends the earlier review of online chat systems (Report 6), by reviewing a further seven products that provide text-based instant messaging (IM). The functionality of these products in distance education contexts is stressed in relation to their comparative costs, complexity, control, clarity, technical framework, and other functional options.

  13. Technical Evaluation Report 14: Chat and Instant Messaging Systems (synchronous: Report 2/ 3

    Directory of Open Access Journals (Sweden)

    Ellen Kinsel

    2002-10-01

    Full Text Available This study extends the earlier review of online chat systems (Report 6, by reviewing a further seven products that provide text-based instant messaging (IM. The functionality of these products in distance education contexts is stressed in relation to their comparative costs, complexity, control, clarity, technical framework, and other functional options.

  14. Variable-Speed Wind System Design : Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Lauw, Hinan K.; Weigand, Claus H.; Marckx, Dallas A.; Electronic Power Conditioning, Inc.

    1993-10-01

    Almost from the onset of the development of wind energy conversion systems (WECS), it was known that variable-speed operation of the turbine would maximize energy capture. This study was commissioned to assess the cost, efficiency gain, reduction of the cost of energy (COE), and other operating implications of converting the existing hardware of a modern fixed-speed wind energy conversion system to variable-speed operation. The purpose of this study was to develop a preliminary design for the hardware required to allow variable-speed operation using a doubly-fed generator with an existing fixed-speed wind turbine design. The turbine selected for this study is the AWT-26 designed and built by Advanced Wind Turbines Inc. of Redmond, Washington. The lowest projected COE using this variable-speed generation system is projected to be $0.0499/kWh, compared to the lowest possible COE with fixed-speed generation which is projected to be $0.0546/kWh. This translates into a 8.6% reduction of the COE using this variable-speed generation option. The preliminary system design has advanced to where the printed circuit boards can be physically laid out based on the schematics and the system software can be written based on the control flow-charts. The core of hardware and software has been proven to be successful in earlier versions of VSG systems. The body of this report presents the results of the VSWG system development. Operation under normal and fault conditions is described in detail, the system performance for variable-speed operation is estimated and compared to the original fixed-speed system performance, and specifications for all system components (generator, power electronic converter, and system controller) are given. Costs for all components are estimated, and incremental system cost is compared to incremental energy production. Finally, operational features of the VSWG which are not available in the existing FSWG system are outlined.

  15. Communications and control for electric power systems: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kirkham, H.

    1998-04-01

    This report is a summary of some of the work done on the Communications and Control project, with particular emphasis on the achievements during the years 1986--1996. During those years, the project moved away from concern with dispersed storage and generation and its impact on power system operation (the team was responsible for studies in this area, and for making a power system simulator that included DSG), and became involved in more concrete work aimed at applying high-tech solutions to problems of power system communications and control. This report covers work done at JPL on the following topics: (1) the measurement of electric and magnetic fields, both ac and dc; (2) the use of optical power to supply low-power electronics; (3) the design of a fault-tolerant communication system designed for distribution automation; and (4) a digital phase locked loop that allows the use of low-power transmitting electronics to recreate a good-quality signal at the receiver. In a report of this kind, only the results and highlights of the work are described.

  16. Breast imaging and reporting data system (BIRADS): magnetic resonance imaging.

    Science.gov (United States)

    Tardivon, Anne A; Athanasiou, Alexandra; Thibault, Fabienne; El Khoury, Carl

    2007-02-01

    This article reviews the technical aspects and interpretation criteria in breast MR imaging based on the first edition of breast imaging and reporting data system (BIRADS) published by the American College of Radiology (ACR) in 2003. In a second article, practical cases will be proposed for training the readers. The major aims of using this lexicon are: first to use a logical and standardized description of MR lesions, secondly to obtain a structured MR report with a clear final impression (BIRADS assessment categories), and thirdly to help comparison between different clinical studies based on similar breast MRI terminology.

  17. Breast imaging and reporting data system (BIRADS): Magnetic resonance imaging

    Energy Technology Data Exchange (ETDEWEB)

    Tardivon, Anne A. [Department of Radiology, Institut Curie, 26 rue d' Ulm, 75248 Paris Cedex 05 (France)]. E-mail: anne.tardivon@curie.net; Athanasiou, Alexandra [Department of Radiology, Institut Curie, 26 rue d' Ulm, 75248 Paris Cedex 05 (France); Thibault, Fabienne [Department of Radiology, Institut Curie, 26 rue d' Ulm, 75248 Paris Cedex 05 (France); El Khoury, Carl [Department of Radiology, Institut Curie, 26 rue d' Ulm, 75248 Paris Cedex 05 (France)

    2007-02-15

    This article reviews the technical aspects and interpretation criteria in breast MR imaging based on the first edition of breast imaging and reporting data system (BIRADS) published by the American College of Radiology (ACR) in 2003. In a second article, practical cases will be proposed for training the readers. The major aims of using this lexicon are: first to use a logical and standardized description of MR lesions, secondly to obtain a structured MR report with a clear final impression (BIRADS assessment categories), and thirdly to help comparison between different clinical studies based on similar breast MRI terminology.

  18. Dynamic Systems Analysis Report for Nuclear Fuel Recycle

    Energy Technology Data Exchange (ETDEWEB)

    Brent Dixon; Sonny Kim; David Shropshire; Steven Piet; Gretchen Matthern; Bill Halsey

    2008-12-01

    This report examines the time-dependent dynamics of transitioning from the current United States (U.S.) nuclear fuel cycle where used nuclear fuel is disposed in a repository to a closed fuel cycle where the used fuel is recycled and only fission products and waste are disposed. The report is intended to help inform policy developers, decision makers, and program managers of system-level options and constraints as they guide the formulation and implementation of advanced fuel cycle development and demonstration efforts and move toward deployment of nuclear fuel recycling infrastructure.

  19. The right whale mandatory ship reporting system: a retrospective

    Directory of Open Access Journals (Sweden)

    Gregory K. Silber

    2015-03-01

    Full Text Available In 1998, the United States sought and received International Maritime Organization-endorsement of two Mandatory Ship Reporting (MSR systems designed to improve mariner awareness about averting ship collisions with the endangered North Atlantic right whale (Eubalaena glacialis. Vessel collisions are a serious threat to the right whale and the program was among the first formal attempts to reduce this threat. Under the provisions of the MSR, all ships >300 gross tons are required to report their location, speed, and destination to a shore-based station when entering two key right whale habitats: one in waters off New England and one off coastal Georgia and Florida. In return, reporting ships receive an automatically-generated message, delivered directly to the ship’s bridge, that provides information about right whale vulnerability to vessel collisions and actions mariners can take to avoid collisions. The MSR has been in operation continuously from July 1999 to the present. Archived incoming reports provided a 15-plus year history of ship operations in these two locations. We analyzed a total of 26,772 incoming MSR messages logged between July 1999 and December 2013. Most ships that were required to report did so, and compliance rates were generally constant throughout the study period. Self-reported vessel speeds when entering the systems indicated that most ships travelled between 10 and 16 (range = 5–20 + knots. Ship speeds generally decreased in 2009 to 2013 following implementation of vessel speed restrictions. The number of reports into the southern system remained relatively constant following a steady increase through 2007, but numbers in the northern system decreased annually beginning in 2008. If reporting is indicative of long-term patterns in shipping operations, it reflects noteworthy changes in marine transportation. Observed declines in ship traffic are likely attributable to the 2008–2009 economic recession, the

  20. The right whale mandatory ship reporting system: a retrospective.

    Science.gov (United States)

    Silber, Gregory K; Adams, Jeffrey D; Asaro, Michael J; Cole, Timothy V N; Moore, Katie S; Ward-Geiger, Leslie I; Zoodsma, Barbara J

    2015-01-01

    In 1998, the United States sought and received International Maritime Organization-endorsement of two Mandatory Ship Reporting (MSR) systems designed to improve mariner awareness about averting ship collisions with the endangered North Atlantic right whale (Eubalaena glacialis). Vessel collisions are a serious threat to the right whale and the program was among the first formal attempts to reduce this threat. Under the provisions of the MSR, all ships >300 gross tons are required to report their location, speed, and destination to a shore-based station when entering two key right whale habitats: one in waters off New England and one off coastal Georgia and Florida. In return, reporting ships receive an automatically-generated message, delivered directly to the ship's bridge, that provides information about right whale vulnerability to vessel collisions and actions mariners can take to avoid collisions. The MSR has been in operation continuously from July 1999 to the present. Archived incoming reports provided a 15-plus year history of ship operations in these two locations. We analyzed a total of 26,772 incoming MSR messages logged between July 1999 and December 2013. Most ships that were required to report did so, and compliance rates were generally constant throughout the study period. Self-reported vessel speeds when entering the systems indicated that most ships travelled between 10 and 16 (range = 5-20 +) knots. Ship speeds generally decreased in 2009 to 2013 following implementation of vessel speed restrictions. The number of reports into the southern system remained relatively constant following a steady increase through 2007, but numbers in the northern system decreased annually beginning in 2008. If reporting is indicative of long-term patterns in shipping operations, it reflects noteworthy changes in marine transportation. Observed declines in ship traffic are likely attributable to the 2008-2009 economic recession, the containerized shipping industry

  1. Risoe energy report 7. Future low carbon energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Soenderberg Petersen, L. (eds.)

    2008-10-15

    This Risoe Energy Report, the seventh of a series that began in 2002, takes as its point of reference the recommendations of the Intergovernmental Panel on Climate Change (IPCC) in 2007. The IPCC states that if anticipated climate change is to remain in the order of 2 to 3 degrees centigrades over the next century, the world's CO{sub 2} emissions would have to peak within the next 10-15 years and ultimately be reduced to approximately 50% of their present level by the middle of the century. The IPCC states further that this would be possible, provided that serious action is taken now. The different regions and countries of the world are in various states of development, and hence have different starting points for contributing to these reductions in CO{sub 2} emissions. This report presents state-of-the-art and development perspectives for energy supply technologies, new energy systems, end-use energy efficiency improvements and new policy measures. It also includes estimates of the CO{sub 2} reduction potentials for different technologies. The technologies are characterized with regard to their ability to contribute either to ensuring a peak in CO{sub 2} emissions within 10-15 years, or to long-term CO{sub 2} reductions. The report outlines the current and likely future composition of energy systems in Denmark, and examines three groups of countries: i) Europe and the other OECD member nations; ii) large and rapidly growing developing economies, notably India and China; iii) typical least developed countries, such as many African nations. The report emphasises how future energy developments and systems might be composed in these three country groupings, and to what extent the different technologies might contribute. The report addresses the need for research and demonstration together with market incentives, and policy measures with focus on initiatives that can promote the development towards CO{sub 2} reductions. Specifically, the report identifies system

  2. Building America Systems Integration Research Annual Report: FY 2012

    Energy Technology Data Exchange (ETDEWEB)

    Gestwick, M.

    2013-05-01

    This document is the Building America FY2012 Annual Report, which includes an overview of the Building America Program activities and the work completed by the National Renewable Energy Laboratory and the Building America industry consortia (the Building America teams). The annual report summarizes major technical accomplishments and progress towards U.S. Department of Energy Building Technologies Program's multi-year goal of developing the systems innovations that enable risk-free, cost effective, reliable and durable efficiency solutions that reduce energy use by 30%-50% in both new and existing homes.

  3. Building America Systems Integration Research Annual Report. FY 2012

    Energy Technology Data Exchange (ETDEWEB)

    Gestwick, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-05-01

    This Building America FY2012 Annual Report includes an overview of the Building America Program activities and the work completed by the National Renewable Energy Laboratory and the Building America industry consortia (the Building America teams). The annual report summarizes major technical accomplishments and progress towards U.S. Department of Energy Building Technologies Program's multi-year goal of developing the systems innovations that enable risk-free, cost effective, reliable and durable efficiency solutions that reduce energy use by 30%-50% in both new and existing homes.

  4. An Evaluation of Departmental Radiation Oncology Incident Reports: Anticipating a National Reporting System

    Energy Technology Data Exchange (ETDEWEB)

    Terezakis, Stephanie A., E-mail: stereza1@jhmi.edu [Department of Radiation Oncology and Molecular Radiation Sciences, The Johns Hopkins University School of Medicine, Baltimore, Maryland (United States); Harris, Kendra M. [Department of Radiation Oncology and Molecular Radiation Sciences, The Johns Hopkins University School of Medicine, Baltimore, Maryland (United States); Ford, Eric [Department of Radiation Oncology and Molecular Radiation Sciences, The Johns Hopkins University School of Medicine, Baltimore, Maryland (United States); Department of Radiation Oncology, University of Washington, Seattle, Washington (United States); Michalski, Jeff [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, Missouri (United States); DeWeese, Theodore [Department of Radiation Oncology and Molecular Radiation Sciences, The Johns Hopkins University School of Medicine, Baltimore, Maryland (United States); Santanam, Lakshmi; Mutic, Sasa; Gay, Hiram [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, Missouri (United States)

    2013-03-15

    Purpose: Systems to ensure patient safety are of critical importance. The electronic incident reporting systems (IRS) of 2 large academic radiation oncology departments were evaluated for events that may be suitable for submission to a national reporting system (NRS). Methods and Materials: All events recorded in the combined IRS were evaluated from 2007 through 2010. Incidents were graded for potential severity using the validated French Nuclear Safety Authority (ASN) 5-point scale. These incidents were categorized into 7 groups: (1) human error, (2) software error, (3) hardware error, (4) error in communication between 2 humans, (5) error at the human-software interface, (6) error at the software-hardware interface, and (7) error at the human-hardware interface. Results: Between the 2 systems, 4407 incidents were reported. Of these events, 1507 (34%) were considered to have the potential for clinical consequences. Of these 1507 events, 149 (10%) were rated as having a potential severity of ≥2. Of these 149 events, the committee determined that 79 (53%) of these events would be submittable to a NRS of which the majority was related to human error or to the human-software interface. Conclusions: A significant number of incidents were identified in this analysis. The majority of events in this study were related to human error and to the human-software interface, further supporting the need for a NRS to facilitate field-wide learning and system improvement.

  5. Safety analysis report for packaging (onsite) doorstop samplecarrier system

    Energy Technology Data Exchange (ETDEWEB)

    Obrien, J.H.

    1997-02-24

    The Doorstop Sample Carrier System consists of a Type B certified N-55 overpack, U.S. Department of Transportation (DOT) specification or performance-oriented 208-L (55-gal) drum (DOT 208-L drum), and Doorstop containers. The purpose of the Doorstop Sample Carrier System is to transport samples onsite for characterization. This safety analysis report for packaging (SARP) provides the analyses and evaluation necessary to demonstrate that the Doorstop Sample Carrier System meets the requirements and acceptance criteria for both Hanford Site normal transport conditions and accident condition events for a Type B package. This SARP also establishes operational, acceptance, maintenance, and quality assurance (QA) guidelines to ensure that the method of transport for the Doorstop Sample Carrier System is performed safely in accordance with WHC-CM-2-14, Hazardous Material Packaging and Shipping.

  6. Vesiculobullous systemic lupus erythematosus. A report of four cases.

    Science.gov (United States)

    Camisa, C

    1988-01-01

    A vesiculobullous eruption is now recognized as a specific but rare cutaneous complication of systemic lupus erythematosus. Four additional cases are reported in whom the five previously proposed criteria were met. Increased activity of systemic lupus erythematosus affecting other organ systems was documented in three of four cases. All four patients demonstrated a positive lupus band, and three of four showed granular deposits of IgA along the basement membrane zone (BMZ). Evidence of glomerulonephritis was obtained in three of four cases, which resulted in death in one. The higher than expected incidence of IgA deposits in skin and renal disease in patients with vesiculobullous eruption of systemic lupus erythematosus is again confirmed. The eruption cleared in all four cases with either dapsone, 50 mg daily, or high doses of corticosteroids and immunosuppressive agents.

  7. An X Window system for statlab results reporting.

    Science.gov (United States)

    Barrows, R. C.; Allen, B.; Fink, D. J.

    1993-01-01

    We have developed a system that receives "stat" results encoded in Health Level Seven from the Laboratory Information System, prints a report in destination Intensive Care Units (ICUs), and captures the data for review in a custom spreadsheet format at color X-terminals located in ICUs. Available services include a reference nomogram plot of arterial blood gas data, printed summaries, automated access to the Clinical Information System and a Medline database, electronic mail, a simulated electronic calculator, and general news and information. Security mechanisms include an audit trail of user activities on the system. Noteworthy technical aspects and non-technical factors impacting success are discussed. Images Figure 2 Figure 3 PMID:8130490

  8. Engineered Barrier System Degradation, Flow, and Transport Process Model Report

    Energy Technology Data Exchange (ETDEWEB)

    E.L. Hardin

    2000-07-17

    The Engineered Barrier System Degradation, Flow, and Transport Process Model Report (EBS PMR) is one of nine PMRs supporting the Total System Performance Assessment (TSPA) being developed by the Yucca Mountain Project for the Site Recommendation Report (SRR). The EBS PMR summarizes the development and abstraction of models for processes that govern the evolution of conditions within the emplacement drifts of a potential high-level nuclear waste repository at Yucca Mountain, Nye County, Nevada. Details of these individual models are documented in 23 supporting Analysis/Model Reports (AMRs). Nineteen of these AMRs are for process models, and the remaining 4 describe the abstraction of results for application in TSPA. The process models themselves cluster around four major topics: ''Water Distribution and Removal Model, Physical and Chemical Environment Model, Radionuclide Transport Model, and Multiscale Thermohydrologic Model''. One AMR (Engineered Barrier System-Features, Events, and Processes/Degradation Modes Analysis) summarizes the formal screening analysis used to select the Features, Events, and Processes (FEPs) included in TSPA and those excluded from further consideration. Performance of a potential Yucca Mountain high-level radioactive waste repository depends on both the natural barrier system (NBS) and the engineered barrier system (EBS) and on their interactions. Although the waste packages are generally considered as components of the EBS, the EBS as defined in the EBS PMR includes all engineered components outside the waste packages. The principal function of the EBS is to complement the geologic system in limiting the amount of water contacting nuclear waste. A number of alternatives were considered by the Project for different EBS designs that could provide better performance than the design analyzed for the Viability Assessment. The design concept selected was Enhanced Design Alternative II (EDA II).

  9. Aircraft wire system laboratory development : phase I progress report.

    Energy Technology Data Exchange (ETDEWEB)

    Dinallo, Michael Anthony; Lopez, Christopher D.

    2003-08-01

    An aircraft wire systems laboratory has been developed to support technical maturation of diagnostic technologies being used in the aviation community for detection of faulty attributes of wiring systems. The design and development rationale of the laboratory is based in part on documented findings published by the aviation community. The main resource at the laboratory is a test bed enclosure that is populated with aged and newly assembled wire harnesses that have known defects. This report provides the test bed design and harness selection rationale, harness assembly and defect fabrication procedures, and descriptions of the laboratory for usage by the aviation community.

  10. Design and synthesis of reactive separation systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Doherty, M.F.

    1992-12-31

    During the last decade there has been a rapid upturn in interest in reactive distillation. The chemical process industry recognizes the favorable economics of carrying out reaction simultaneously with distillation for certain classes of reacting systems, and many new processes have been built based on this technology. Interest is also increasing by academics and software vendors. Systematic design methods for reactive distillation systems have only recently begun to emerge. In this report we survey the available design techniques and point out the contributions made by our group at the University of Massachusetts.

  11. Environmental Systems Research Candidates FY-01 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David Lynn; Piet, Steven James

    2001-03-01

    The Environmental Systems Research Candidates (ESRC) Program ran from April 2000 through September 2001 as part of the Environmental Systems Research and Analysis (ESRA) Program at the Idaho National Engineering and Environmental Laboratory (INEEL). ESRA provides key science and technology to meet the cleanup mission of the U.S. Department of Energy Office of Environmental Management (EM), and performs research and development that will help solve current legacy problems and enhance the INEEL’s scientific and technical capability for solving longer-term challenges. This report documents the accomplishments of the ESRC Program. The ESRC Program consisted of 25 tasks subdivided within four research areas.

  12. Conceptual design of advanced central receiver power system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Tracey, T. R.

    1978-09-01

    The design of a 300 MWe tower focus power plant which uses molten salt heat transfer fluids and sensible heat storage is described in detail. The system consists of nine heliostat fields with 7711 heliostats in each. Four cavity receivers are located at the top of a 155-meter tower. Tasks include: (1) review and analysis of preliminary specification; (2) parametric analysis; (3) selection of preferred configuration; (4) commercial plant conceptual design; (5) assessment of commercial-sized advanced central power system; (6) development plan; (7) program plan; (8) reports and data; (9) program management; (10) safety analysis; and (11) material study and test program. (WHK)

  13. Coincident systemic lupus erythematosus and psoriasis vulgaris: a case report.

    Science.gov (United States)

    Wang, Y; Da, G; Yu, Y; Han, J; Li, H

    2015-12-01

    Psoriasis vulgaris is an autoimmune chronic inflammatory skin disease, but its association with other typical autoimmune disease such as systemic lupus erythematosus has only occasionally been reported. We presented a 25-year-old female who developed systemic lupus erythematosus associated with psoriasis vulgaris. Her conditions were in good control after she got administration of prednisolone (5 mg/day) and Tripterygium Wilfordii Hook (20 mg/day). It is necessary to integrate past history and physical examination to diagnose coincident SLE and psoriasis, and combined treatment with prednisolone and Tripterygium Wilfordii Hook proves effective.

  14. Improving Patients\\\\\\' Care through Electronic Medical Error Reporting System

    Directory of Open Access Journals (Sweden)

    Fatemeh Rangraz Jeddi

    2015-06-01

    Full Text Available Medical errors are unintentional acts that take place due to the negligence or lead to undesirable consequences in medical practice. The purpose of this study was to design a conceptual model for medical error reporting system. This applied descriptive cross-sectional research employed Delphi method carried out from 2012 to 2013. The study population was medical and paramedical personnel of health workers and paramedical personnel of hospitals, deputy of treatment, faculty members of Kashan University of Medical Sciences in addition to the internet and library resources. Sample size included 30 expert individuals in the field of medical errors. The one-stage stratified sampling procedure was used. The items with opposition ranging 0 to 25 were confirmed and those exceeding 50 were rejected whereas the items with the opposition 25 to 50 were reevaluated in the second session. This process continued for three times and the items that failed to be approved were eliminated in the model. Based on the results of this research, repeated informing about and reporting operation at on-line bases that have access to the incidence of error detected on time, identifying cause and damage due to the incidence reported confidential and anonymously immediately after the occurrence is necessary. Analysis of data quantitatively and qualitatively by using computer software is needed. Classifying the errors reports based on feedback provision according to the cause of error is needed. In addition, confidential report and possible manual retrieval were suggested It is essential to determine the means of reporting and items in the reporting form including time, cause and damage of medical error, media of reporting and method of recording and analysis.

  15. Adoption and Foster Care Analysis and Reporting System. Final rule.

    Science.gov (United States)

    2016-12-14

    The Social Security Act (the Act) requires that ACF regulate a national data collection system that provides comprehensive demographic and case-specific information on children who are in foster care and adopted. This final rule replaces existing Adoption and Foster Care Analysis and Reporting System (AFCARS) regulations and the appendices to require title IV-E agencies to collect and report data to ACF on children in out-of-home care, and who exit out-of-home care to adoption or legal guardianship, children in out-of-home care who are covered by the Indian Child Welfare Act, and children who are covered by a title IV-E adoption or guardianship assistance agreement.

  16. Small power systems study. Volume. Study results. Technical summary report

    Energy Technology Data Exchange (ETDEWEB)

    Sitney, L.R.

    1978-05-31

    The Division of Solar Technology of the Department of Energy is currently examining the market potential of a number of dispersed solar energy systems, including the small (less than or equal to 10 MW/sub e/) solar thermal power system. Small fossil-fueled generating units in the United States utility system, (i.e., investor-owned, municipal, and cooperatives) have a current capacity of approximately 8000 MW/sub e/ or about 1.5 percent of the total US electrical capacity, and provide a large potential market for small solar thermal power systems. The Small Power Systems Study has as its objective the determination of conditions under which small (less than or equal to 10 MW/sub e/) solar thermal power units can provide cost-effective electrical power to a variety of users. Potential users, in addition to the utility systems; include Department of Defense installations and applications, remote mining and/or lumbering operations, and other industrial power systems with and without cogeneration. The first year's results on the Small Power Systems Study are summarized. The data base used and the breakeven cost analysis are discussed. Information on both small (less than or equal to 10 MW/sub e/) generating units and the utility systems using them is presented as well as data on fossil fuel costs, solar plant costs, and solar insolation values. The results of a survey of Department of Defense (DOD) worldwide electrical generating capacity at its military bases and on a potential DOD application are presented. Information on a potential small solar power system experiment in the interior of Alaska is given, and a limited amount of information on a remote application which would provide power or a large open pit copper mine is presented. Volume II of this Technical Summary Report contains an inventory, by state, of the small (less than or equal to 10 MW/sub e/) generating units in the US utility system. (WHK)

  17. Short-Termed Integrated Forecasting System: 1993 Model documentation report

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The purpose of this report is to define the Short-Term Integrated Forecasting System (STIFS) and describe its basic properties. The Energy Information Administration (EIA) of the US Energy Department (DOE) developed the STIFS model to generate short-term (up to 8 quarters), monthly forecasts of US supplies, demands, imports exports, stocks, and prices of various forms of energy. The models that constitute STIFS generate forecasts for a wide range of possible scenarios, including the following ones done routinely on a quarterly basis: A base (mid) world oil price and medium economic growth. A low world oil price and high economic growth. A high world oil price and low economic growth. This report is written for persons who want to know how short-term energy markets forecasts are produced by EIA. The report is intended as a reference document for model analysts, users, and the public.

  18. Short-Termed Integrated Forecasting System: 1993 Model documentation report

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The purpose of this report is to define the Short-Term Integrated Forecasting System (STIFS) and describe its basic properties. The Energy Information Administration (EIA) of the US Energy Department (DOE) developed the STIFS model to generate short-term (up to 8 quarters), monthly forecasts of US supplies, demands, imports exports, stocks, and prices of various forms of energy. The models that constitute STIFS generate forecasts for a wide range of possible scenarios, including the following ones done routinely on a quarterly basis: A base (mid) world oil price and medium economic growth. A low world oil price and high economic growth. A high world oil price and low economic growth. This report is written for persons who want to know how short-term energy markets forecasts are produced by EIA. The report is intended as a reference document for model analysts, users, and the public.

  19. Safety analysis report for packaging (onsite) sample pig transport system

    Energy Technology Data Exchange (ETDEWEB)

    MCCOY, J.C.

    1999-03-16

    This Safety Analysis Report for Packaging (SARP) provides a technical evaluation of the Sample Pig Transport System as compared to the requirements of the U.S. Department of Energy, Richland Operations Office (RL) Order 5480.1, Change 1, Chapter III. The evaluation concludes that the package is acceptable for the onsite transport of Type B, fissile excepted radioactive materials when used in accordance with this document.

  20. Systemic canine histoplasmosis: A case report from Ecuador.

    Science.gov (United States)

    Ortiz-Yépez, Julio R; Ortega-Paredes, David A; Barba, Pedro M; Mafla-Endara, Paola M; Zurita, Jeannete

    2015-09-01

    Histoplasmosis is a zoonotic systemic mycosis caused by Histoplasma capsulatum. We report a case of a female canine, 4 years old, presenting multifocal lymphadenitis and skin and gingival lesions, in Ecuador. Based on cytological, histopathological, histochemical analyses, fungal culture and DNA sequencing of the ITS region of the fungus, the diagnosis confirmed the presence of H. capsulatum as the agent of infection. The treatment plan included ketoconazole with a satisfactory outcome.

  1. Behavior-aware decision support systems : LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Hirsch, Gary B.; Homer, Jack (Homer Consulting); Chenoweth, Brooke N.; Backus, George A.; Strip, David R.

    2007-11-01

    As Sandia National Laboratories serves its mission to provide support for the security-related interests of the United States, it is faced with considering the behavioral responses that drive problems, mitigate interventions, or lead to unintended consequences. The effort described here expands earlier works in using healthcare simulation to develop behavior-aware decision support systems. This report focuses on using qualitative choice techniques and enhancing two analysis models developed in a sister project.

  2. Solar thermal power systems. Annual technical progress report, FY 1978

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    A technical progress report on the DOE Solar Thermal Power Systems Program is given. Emphasis is on the technical progress of the projects rather than on activities and individual contractor efforts. Each project description indicates its place in the prior to FY 1978 is given; the significant achievements and real progress of each project during FY 1978 are described; and future project activities as well as anticipated significant achievements for each project are forecast. (WHK)

  3. Systems Diagnostics: A McREL Report Prepared for Stupski Foundation's Learning System

    Science.gov (United States)

    Igel, Charles; Apthorp, Helen; Peterson, Gary; Davis, Tony; Moore, Laurie; Englert, Kerry

    2009-01-01

    This document is one of eight reports prepared to support the development of a new learning system, an effort that is the first step in a major initiative undertaken by the Stupski Foundation. The report was created collaboratively by researchers from McRel with guidance from officers of the Stupski Foundation. Its purpose is to provide members of…

  4. The Error Reporting in the ATLAS TDAQ system

    CERN Document Server

    Kolos, S; The ATLAS collaboration; Papaevgeniou, L

    2014-01-01

    The ATLAS Error Reporting feature, which is used in the TDAQ environment, provides a service that allows experts and shift crew to track and address errors relating to the data taking components and applications. This service, called the Error Reporting Service(ERS), gives software applications the opportunity to collect and send comprehensive data about errors, happening at run-time, to a place where it can be intercepted in real-time by any other system component. Other ATLAS online control and monitoring tools use the Error Reporting service as one of their main inputs to address system problems in a timely manner and to improve the quality of acquired data. The actual destination of the error messages depends solely on the run-time environment, in which the online applications are operating. When applications send information to ERS, depending on the actual configuration the information may end up in a local file, in a database, in distributed middle-ware, which can transport it to an expert system or dis...

  5. The Error Reporting in the ATLAS TDAQ System

    CERN Document Server

    Kolos, S; The ATLAS collaboration; Papaevgeniou, L

    2015-01-01

    The ATLAS Error Reporting feature, which is used in the TDAQ environment, provides a service that allows experts and shift crew to track and address errors relating to the data taking components and applications. This service, called the Error Reporting Service(ERS), gives software applications the opportunity to collect and send comprehensive data about errors, happening at run-time, to a place where it can be intercepted in real-time by any other system component. Other ATLAS online control and monitoring tools use the Error Reporting service as one of their main inputs to address system problems in a timely manner and to improve the quality of acquired data. The actual destination of the error messages depends solely on the run-time environment, in which the online applications are operating. When applications send information to ERS, depending on the actual configuration the information may end up in a local file, in a database, in distributed middle-ware, which can transport it to an expert system or dis...

  6. Heat-pump-centered integrated community energy systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-01

    Heat-pump-centered integrated community energy systems (HP-ICES) are energy systems for communities which provide heating, cooling and/or other thermal energy services through the use of heat pumps. Since heat pumps primarily transfer energy from existing and otherwise probably unused sources, rather than convert it from electrical or chemical to thermal form, HP-ICES offer significant potential for energy savings. Secondary benefits of HP-ICES include reduction of adverse environmental effects as compared to conventional systems, reliable production of services in contrast to the increasingly frequent utility curtailments and interruptions, and delivery of services to consumers at costs lower than those for conventional systems (including acquisition, operation, and maintenance costs). The objective of this multiphase project is development and demonstration of HP-ICES concepts leading to one or more operational systems by the end of 1984. The results of the system development phase of the HP-ICES Project are reported. Information is presented on: central heat pump and distributed heat pump ICES; potential applications; waste heat availability; system performance and economics; environmental impacts; site requirements; component testing requirements; mathematical analysis of heat balance and cost relations; and performance and economic analyses of HP-ICES located near Seattle, Washington and San Antonio, Texas. (LCL)

  7. Practical reliability and uncertainty quantification in complex systems : final report.

    Energy Technology Data Exchange (ETDEWEB)

    Grace, Matthew D.; Ringland, James T.; Marzouk, Youssef M. (Massachusetts Institute of Technology, Cambridge, MA); Boggs, Paul T.; Zurn, Rena M.; Diegert, Kathleen V. (Sandia National Laboratories, Albuquerque, NM); Pebay, Philippe Pierre; Red-Horse, John Robert (Sandia National Laboratories, Albuquerque, NM)

    2009-09-01

    The purpose of this project was to investigate the use of Bayesian methods for the estimation of the reliability of complex systems. The goals were to find methods for dealing with continuous data, rather than simple pass/fail data; to avoid assumptions of specific probability distributions, especially Gaussian, or normal, distributions; to compute not only an estimate of the reliability of the system, but also a measure of the confidence in that estimate; to develop procedures to address time-dependent or aging aspects in such systems, and to use these models and results to derive optimal testing strategies. The system is assumed to be a system of systems, i.e., a system with discrete components that are themselves systems. Furthermore, the system is 'engineered' in the sense that each node is designed to do something and that we have a mathematical description of that process. In the time-dependent case, the assumption is that we have a general, nonlinear, time-dependent function describing the process. The major results of the project are described in this report. In summary, we developed a sophisticated mathematical framework based on modern probability theory and Bayesian analysis. This framework encompasses all aspects of epistemic uncertainty and easily incorporates steady-state and time-dependent systems. Based on Markov chain, Monte Carlo methods, we devised a computational strategy for general probability density estimation in the steady-state case. This enabled us to compute a distribution of the reliability from which many questions, including confidence, could be addressed. We then extended this to the time domain and implemented procedures to estimate the reliability over time, including the use of the method to predict the reliability at a future time. Finally, we used certain aspects of Bayesian decision analysis to create a novel method for determining an optimal testing strategy, e.g., we can estimate the 'best' location to

  8. Application of Hospital Information Systems-Construction of an Incident Reporting System

    Directory of Open Access Journals (Sweden)

    Yii-Ching Lee

    2016-11-01

    Full Text Available This study depicts hospitals’ need to establish an incident reporting system to avoid disputes and enhance reporting intention. A series of implement are provided, including an RCA team is partied to make improvements based on the root cause of a case, a reward system needs to be provided to encourage the employees’ intentions to report incident events, and the root causes is analyzed to deliver the improvement measures. In addition, Medical Quality and Patient Safety Committee should be organized to promote better medical quality and patient safety. Last, the promotion of patient safety culture should pay more attention to the implement process, rather than separate strategies.

  9. Solar thermal power systems. Annual technical progress report, FY 1979

    Energy Technology Data Exchange (ETDEWEB)

    Braun, Gerald W.

    1980-06-01

    The Solar Thermal Power Systems Program is the key element in the national effort to establish solar thermal conversion technologies within the major sectors of the national energy market. It provides for the development of concentrating mirror/lens heat collection and conversion technologies for both central and dispersed receiver applications to produce electricity, provide heat at its point of use in industrial processes, provide heat and electricity in combination for industrial, commercial, and residential needs, and ultimately, drive processes for production of liquid and gaseous fuels. This report is the second Annual Technical Progress Report for the Solar Thermal Power Systems Program and is structured according to the organization of the Solar Thermal Power Systems Program on September 30, 1979. Emphasis is on the technical progress of the projects rather than on activities and individual contractor efforts. Each project description indicates its place in the Solar Thermal Power Systems Program, a brief history, the significant achievements and real progress during FY 1979, also future project activities as well as anticipated significant achievements are forecast. (WHK)

  10. Description of Fracture Systems for External Criticality Reports

    Energy Technology Data Exchange (ETDEWEB)

    Jean-Philippe Nicot

    2001-09-21

    The purpose of this Analysis/Model Report (AMR) is to describe probabilistically the main features of the geometry of the fracture system in the vicinity of the repository. They will be used to determine the quantity of fissile material that could accumulate in the fractured rock underneath a waste package as it degrades. This AMR is to feed the geochemical calculations for external criticality reports. This AMR is done in accordance with the technical work plan (BSC (Bechtel SAIC Company) 2001 b). The scope of this AMR is restricted to the relevant parameters of the fracture system. The main parameters of interest are fracture aperture and fracture spacing distribution parameters. The relative orientation of the different fracture sets is also important because of its impact on criticality, but they will be set deterministically. The maximum accumulation of material depends primarily on the fracture porosity, combination of the fracture aperture, and fracture intensity. However, the fracture porosity itself is not sufficient to characterize the potential for accumulation of a fracture system. The fracture aperture is also important because it controls both the flow through the fracture and the potential plugging of the system. Other features contributing to the void space such as lithophysae are also investigated. On the other hand, no analysis of the matrix porosity is done. The parameters will be used in sensitivity analyses of geochemical calculations providing actinide accumulations and in the subsequent Monte Carlo criticality analyses.

  11. HyPEP FY-07 Report: System Integration Model Development

    Energy Technology Data Exchange (ETDEWEB)

    C. H. Oh; E. S. Kim; S. R. Sherman; R. Vilim

    2007-04-01

    The integrated system of a Very High Temperature Gas-Cooled Reactor (VHTR) and a High Temperature Steam Electrolysis (HTSE) process is one of systems being investigated by the U.S. Department of Energy and Idaho National Laboratory. This system will produce hydrogen by utilizing a highly efficient VHTR with an outlet temperature of 900 °C and supplying necessary energy and electricity to the HTSE process for electrolysis of high temperature steam. This report includes a description of five configurations including an indirect parallel cycle, an indirect serial cycle, a direct serial cycle, a steam combined cycle, and a reheat cycle. HYSYS simulations were performed for each of these configurations coupled to a HTSE process. Final results are presented along with parametric studies and process optimization.

  12. Energy Systems Studies Program annual report, fiscal year 1976

    Energy Technology Data Exchange (ETDEWEB)

    Beller, M. (ed.)

    1976-06-01

    This is the fourth annual progress report of the Energy Systems Studies Program supported at Brookhaven National Laboratory by the Energy Research and Development Administration (ERDA), Office of the Assistant Administrator for Planning and Analysis. The program is coordinated under the designation of a National Center for Analysis of Energy Systems (NCAES). Five working groups with specific program responsibilities are: policy analysis, economic analysis, biomedical and environmental assessment, technology assessment, and energy data and models. Future scenarios of the implementation of groups of technologies and new resources are developed. The socio-economic and environmental consequences are analyzed in detail and impact analyses are performed. Progress during FY 1976 is summarized in the following areas: energy system model development; energy-economic model development; technology assessments and support; economic analyses; and energy model data base activities. The program plan for FY 1977 is presented. (MCW)

  13. Comprehensive Planning for an Education System. Report #2, Definition Summary. Fort Lincoln New Town Education System.

    Science.gov (United States)

    General Learning Corp., Washington, DC.

    Presented are program alternatives for operating an innovative school system for Fort Lincoln New Town (FLNT) in Washington, D.C. General Learning Corp (GLC), retained by the school system, offers this report of the "definition phase" of the planning effort during which community residents, D.C. Schools, Government agencies, GLC, and others…

  14. Evaluating accounting information systems that support multiple GAAP reporting using Normalized Systems Theory

    NARCIS (Netherlands)

    Vanhoof, E.; Huysmans, P.; Aerts, Walter; Verelst, J.; Aveiro, D.; Tribolet, J.; Gouveia, D.

    2014-01-01

    This paper uses a mixed methods approach of design science and case study research to evaluate structures of Accounting Information Systems (AIS) that report in multiple Generally Accepted Accounting Principles (GAAP), using Normalized Systems Theory (NST). To comply with regulation, many companies

  15. Adanced Recovery and Integrated Extraction System (ARIES). Preconceptual design report

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, T.O.; Bronson, M.C.; Dennison, D.K.; Flamm, B. [and others

    1996-09-01

    This document describes the preliminary conceptual design of the Advanced Recovery and Integrated Extraction System (ARIES). The ARIES is an overall processing system for the dismantlement of nuclear weapon primaries. The program will demonstrate dismantlement of nuclear weapons and retrieval of the plutonium into a form that is compatible with long-term storage and that is inspectable in an unclassified form appropriate for the application of traditional international safeguards. The purpose of the ARIES process is to receive weapon pits, disassemble them, and provide a product of either a plutonium metal button or plutonium oxide powder appropriately canned to meet all requirements for long-term storage. This demonstration is a 24-month program, with full operation planned during the last three-six months to gain confidence in the system`s flexibility and reliability. The ARIES system is modular in design to offer credible scaling and the ability to incorporate modifications or new concepts. This report describes the preconceptual design of each of the ARIES modules, as well as the integration of the overall system.

  16. Report to Congress: Comprehensive Program Plan for Advanced Turbine Systems

    Science.gov (United States)

    1993-07-01

    Consistent with the Department of Energy (DOE) mission, the Advanced Turbine Systems (ATS) Program will develop more efficient gas turbine systems for both utility and industrial electric power generation (including cogeneration). The program will develop base-load power systems for commercial offering in the year 2000. Although the target fuel is natural gas, the ATS will be adaptable to coal and biomass firing. All ATS will exhibit these characteristics: Ultra-high efficiency utility systems: 60 percent (lower heating value basis); industrial systems--15 percent improvement over today's best gas turbine systems; Environmental superiority (reduced nitrogen oxides (NO(x)), carbon dioxide (CO2), carbon monoxide (CO), and unburned hydrocarbons (UHC)); and cost competitiveness (10 percent lower cost of electricity). This Program Plan was requested in the House, Senate, and Conference Reports on the FY 1993 Interior and Related Agencies Appropriations Act, Public Law 102--381, and is consistent with the Energy Policy Act of 1992, which (in Section 2112) identifies work for improving gas turbines. This plan outlines the 8-year ATS Program and discusses rationale and planning. Total Program costs are estimated to be $700 million, consisting of an approximate $450 million government share, and an approximate $250 million cost-share by industrial participants.

  17. Reporting ureteroscopy complications using the modified clavien classification system

    Directory of Open Access Journals (Sweden)

    Ahmed Khalil Ibrahim

    2015-01-01

    Full Text Available Objective: Perioperative complications are one of the surrogate indicators of surgical outcomes. However, reporting these complications need a precise grading system. Our aim is to report and grade the complications of semirigid ureteroscopy in ureteral stone management according to the modified Clavien classification system. Materials and Methods: This is a prospective study conducted From January 2012 to June 2013. All patients with ureteral stones who were indicated for semirigid URS were evaluated. All procedures were performed by the same surgeon. The data recorded including patient demographics, clinical indication, stone size and location, operative time and complications were classified according to the modified Clavien classification system. The patients were followed for 8 weeks postoperatively. Results: 148 patients included, Stone distribution was: 89 (60.1% lower ureteral, 26 (17.6% mid ureteral, and 33 (22.3% upper ureteral. the mean stone size was 8.6 mm. Urgent URS done in 23% of patient. The overall stone free rate was 88.5%, the individual stone free rate for the upper, middle and lower ureter were 87.9%, 84.6%, and 89.9%, respectively. The mean operative time was 31.9 min (20-50 min.. Complications occurred in 26.35% of patients. Grade I complications occurred in 32 patients (26.1%, grade II in 9 (6.1%, grade IIIa in 7 (4.7%, grade IIIb in 8 (5.4%, grade IVa in two patient (1.35%, and grade IVb in one patient (0.7%. No grade V complication was encountered. Conclusion: Ureteroscopy becomes the vanguard interventional therapy for ureteral stones with well-established efficacy and safety. It is of paramount importance to adopt a precise structured classification system for reporting surgical complications, that should be flexible and comprehensive in order to accommodate the various and rapidly expanding surgical fields.

  18. The Error Reporting in the ATLAS TDAQ System

    Science.gov (United States)

    Kolos, Serguei; Kazarov, Andrei; Papaevgeniou, Lykourgos

    2015-05-01

    The ATLAS Error Reporting provides a service that allows experts and shift crew to track and address errors relating to the data taking components and applications. This service, called the Error Reporting Service (ERS), gives to software applications the opportunity to collect and send comprehensive data about run-time errors, to a place where it can be intercepted in real-time by any other system component. Other ATLAS online control and monitoring tools use the ERS as one of their main inputs to address system problems in a timely manner and to improve the quality of acquired data. The actual destination of the error messages depends solely on the run-time environment, in which the online applications are operating. When an application sends information to ERS, depending on the configuration, it may end up in a local file, a database, distributed middleware which can transport it to an expert system or display it to users. Thanks to the open framework design of ERS, new information destinations can be added at any moment without touching the reporting and receiving applications. The ERS Application Program Interface (API) is provided in three programming languages used in the ATLAS online environment: C++, Java and Python. All APIs use exceptions for error reporting but each of them exploits advanced features of a given language to simplify the end-user program writing. For example, as C++ lacks language support for exceptions, a number of macros have been designed to generate hierarchies of C++ exception classes at compile time. Using this approach a software developer can write a single line of code to generate a boilerplate code for a fully qualified C++ exception class declaration with arbitrary number of parameters and multiple constructors, which encapsulates all relevant static information about the given type of issues. When a corresponding error occurs at run time, the program just need to create an instance of that class passing relevant values to one

  19. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Science.gov (United States)

    2010-07-01

    ... SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.250 What documents and reports must a safety management system have? The documents and reports required for a safety management...: Table 96.250—Safety Management System Documents and Reports Type of documents and reports Specific...

  20. 20 CFR 663.570 - What is the consumer reports system?

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What is the consumer reports system? 663.570....570 What is the consumer reports system? The consumer reports system, referred to in WIA as... consumer reports system must contain the information necessary for an adult or dislocated worker...

  1. Systemic lupus erythematosus presenting as cryptogenic organizing pneumonia: case report

    Directory of Open Access Journals (Sweden)

    Jedd A

    2015-02-01

    Full Text Available No abstract available. Article truncated after 150 words. Introduction: Systemic Lupus Erythematosus (SLE is a systemic disease with multiorgan involvement. In the respiratory system, SLE can involve the lung parenchyma and pleura with intrathoracic manifestations of pleuritis, alveolar hemorrhage and pulmonary fibrosis. Cryptogenic organizing pneumonia (COP is a rare complication of SLE. We describe a case of newly diagnosed lupus presenting as COP. Case Report: An 18-year-old woman with no significant past medical history presented to the Emergency Department complaining of generalized malaise, cough and fever for 4 days. Her cough was productive with white to brownish sputum. She complained of chest heaviness/pressure with inability to take deep breaths. Her only reported sick contact was her mother who had the “flu” one week prior to the onset of her illness. She denied any illicit drug use, alcohol or smoking, as well as any recent travel or exotic pet exposure. On admission, her vital signs were: temperature 38.4°C, pulse ...

  2. Technical Evaluation Reports 15. Chat and Instant Messaging Systems (synchronous: Report 3/ 3

    Directory of Open Access Journals (Sweden)

    Brian Ludwig

    2002-10-01

    Full Text Available [Previous reviews of chat and IM systems are presented in Reports 6 and 14 in this series.]A further set of four text-based instant messaging (IM products was evaluated: AT&T Anywhere, Parachat, Sonork, and Yahoo Messenger, all available at no cost. Yahoo Messenger was judged to be the most effective of the three products for use by distance education (DE teachers and students, being compatible with most common operating systems and accommodating up to 50 chat room participants. Yahoo Messenger also possesses integrated audio and video capabilities. AT&T Anywhere is an efficient product, which supports Windows-based operating systems only. Parachat (Basic version is a basic, browser accessed chat board without instant messaging (IM capabilities.

  3. [Systemic sarcoidosis: a diagnostic challenge in pediatrics. Case report].

    Science.gov (United States)

    Díaz Angarita, Tomás; Morales Camacho, William; Lozano Neira, Laura; Plata Ortiz, Jessica; Zárate Taborda, Linda

    2016-10-01

    Sarcoidosis is a granulomatous inflammatory disease of unknown etiology, evidenced most often in young adults, which can compromise several organs, mainly lung, lymph nodes, eyes and skin. The presence of the disease in pediatric population is rare. Denomination in pediatrics is made based on age and clinical manifestations of the patient. The aim of this report is to present a case of systemic sarcoidosis in a pediatric patient without lung involvement with severe extrapulmonary manifestations. Fifteen year old patient who debuted with nonspecific symptoms (emesis, weight loss). Radiographic studies without lung involvement but with findings suggestive of Langerhans cell histiocytosis; however, histopathological report (bone and lymph) showed the presence of chronic granulomatous nonnecrotizing disease, sarcoidosis type. Childhood sarcoidosis is a rare and difficult entity to diagnose, mainly by the lack of specific biomarkers for diagnosis.

  4. Conceptual design and systems analysis of photovoltaic systems. Volume II. Study results. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kirpich, A.

    1977-03-19

    This investigation of terrestrial PV systems considered the technical and economic feasibility for systems in three size categories: a small system of about 12 kW peak output for on-site residential use; a large 1500 MW central power plant contributing to the bulk energy of a utility system power grid; and an intermediate size system of about 250 kW for use on public or commercial buildings. In each category, conceptual designs were developed, performance was analyzed for a range of climatic regions, economic analyses were performed, and assessments were made of pertinent institutional issues. The report consists of three volumes. Volume I contains a Study Summary of the major study results. This volume contains the detailed results pertaining to on-site residential photovoltaic systems, central power plant photovoltaic systems, and intermediate size systems applied to commercial and public buildings. Volume III contains supporting appendix material. (WHK)

  5. DOE technology information management system database study report

    Energy Technology Data Exchange (ETDEWEB)

    Widing, M.A.; Blodgett, D.W.; Braun, M.D.; Jusko, M.J.; Keisler, J.M.; Love, R.J.; Robinson, G.L. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.

    1994-11-01

    To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performed detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.

  6. Integrated thermal treatment systems study. Internal review panel report

    Energy Technology Data Exchange (ETDEWEB)

    Cudahy, J.; Escarda, T.; Gimpel, R. [and others

    1995-04-01

    The U.S. Department of Energy (DOE) Office of Technology Development (OTD) commissioned two studies to evaluate nineteen thermal treatment technologies for treatment of DOE mixed low-level waste. These studies were called the Integrated Thermal Treatment System (ITTS) Phase I and Phase II. With the help of the DOE Office of Environmental Management (EM) Mixed Waste Focus Group, OTD formed an ITTS Internal Review Panel to review and comment on the ITTS studies. This Panel was composed of scientists and engineers from throughout the DOE complex, the U.S. Environmental Protection Agency, the California EPA, and private experts. The Panel met from November 15-18, 1994 to review the ITTS studies and to make recommendations on the most promising thermal treatment systems for DOE mixed low-level wastes and on research and development necessary to prove the performance of the technologies. This report describes the findings and presents the recommendations of the Panel.

  7. Experience report: System management at the ALICE HLT cluster

    Energy Technology Data Exchange (ETDEWEB)

    Lara, Camilo; Vennedey, Falco; Ulrich, Jochen; Boettger, Stefan; Breitner, Timo; Kebschull, Udo [Infrastruktur und Rechnersysteme in der Informationsverarbeitung (IRI), Institut fuer Informatik, Goethe-Universitaet Frankfurt am Main (Germany); Collaboration: ALICE-Collaboration

    2013-07-01

    The ALICE HLT cluster is responsible for the first analysis and compression of the data from the ALICE experiment at CERN. The processing is performed using hardware accelerators like FPGAs, GPUs and computer nodes with commodity hardware. The mixture of hardware accelerators and several types of nodes causes an increased configuration and system management effort. To handle this effort, we are using a combination of three tools: Chef for the configuration management, Ganglia for the real time monitoring and SysMES for unattended system management, i.e. automatic problem recognition and solution. The tools help to minimize the manpower needed to administrate the cluster by reducing the time needed to recognize and identify problems or even by solving problems automatically. In this talk, we give an insight into our setup and report on the experience we have gained with the heterogeneous, on-line processing cluster during the last four years.

  8. Piloting a national laboratory electronic programme status reporting system.

    Science.gov (United States)

    Cassim, Naseem; Coetzee, Lindi; Motlonye, Bahule; Mpele, Nobantu; Glencross, Deborah K

    2013-01-01

    The NHLS performs close to 4 million CD4 tests per annum for the public sector in South Africa through a network of 60 CD4 testing laboratories. CD4 laboratory data provides an assessment of the number of patients on ART and HIV-positive patients in the pre-ART wellness programs. This study aims to develop a laboratory based Comprehensive Care, Management and Treatment of HIV and AIDS (CCMT) programme status reporting system for CD4 testing at three health facilities in the Ekurhuleni health district using a newly developed CCMT request form, the Laboratory Information System (LIMS) and Corporate Data Warehouse (CDW). The study will generate monitoring and evaluation data to assist in the management of health facilities through a national electronic corporate data warehouse.

  9. Standard review plan for dry cask storage systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 {open_quotes}Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Cask{close_quotes} contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed.

  10. Technical Evaluation Report 5: Classification of DE Delivery Systems

    Directory of Open Access Journals (Sweden)

    Diane Belyk

    2002-01-01

    Full Text Available For their optimal use in distance education (DE, online educational applications need to be integrated within a comprehensive course management system (CMS. Such systems are server-based software that supports the development, delivery, administration, and evaluation of online learning environments. The selection of an appropriate CMS should be considered from the multiple perspectives of the student, the course developer, the course instructor/ tutor, the technical support staff, and the DE institution’s administration. The current evaluation of CMS packages was conducted by a team of individuals with experience and contacts in relation to each of these DE user types. The report compares a series of CMS packages in terms of their range of features, and in relation to their satisfaction of international online education standards.

  11. Design, Operations, and Safety Report for the MERIT Target System

    Energy Technology Data Exchange (ETDEWEB)

    Graves, Van B [ORNL; Spampinato, Philip Thomas [ORNL

    2007-09-01

    The Mercury Intense Target Project (MERIT) is a proof-of-principal experiment to determine the feasibility of using a free-jet of Hg as a spallation target in a Neutrino Factory or a Muon Collider facility. The 1-cm-diameter, 20-m/sec jet will be generated inside a 15-Tesla magnetic field, and high-speed optical diagnostics will be used to photograph the interaction between the Hg jet and a 24-GeV proton beam.The experiment is scheduled to be conducted at CERN in 2007. ORNL is responsible for the design, fabrication, and testing of a system to deliver the Hg jet within the confines of the 15-cm magnet bore. This report documents the functional and safety requirements of the Hg system along with descriptions of its interfaces to the other experimental equipment.

  12. 78 FR 71036 - Pipeline Safety: Random Drug Testing Rate; Contractor Management Information System Reporting...

    Science.gov (United States)

    2013-11-27

    ...; Contractor Management Information System Reporting; and Obtaining Drug and Alcohol Management Information... Operators to Report Contractor Management Information System (MIS) Data; and New Method for Operators to... ``user name'' and ``password'' for the Drug and Alcohol Management Information System (DAMIS)...

  13. [Learning from mistakes in hospitals. A system perspective on errors and incident reporting systems].

    Science.gov (United States)

    Hofinger, G

    2009-06-01

    Analysis of incidents and near-incidents is an important factor for continuous improvement in patient safety in hospitals and for the promotion of organizational learning. From a system perspective, accidents occur when decision-making at several levels of a working system is faulty and the safety barriers fail. Human error is inevitable but accidents are not. Errors can be used as an opportunity for organizational learning and this is especially true for incidents when patients come to no harm. Starting with explanations of a system perspective on errors, this paper deals with the prerequisites for organizational learning and general rules for establishing incident reporting systems in hospitals.

  14. Environmental Systems Research and Analysis FY 2000 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    David L. Miller; Castle, Peter Myer; Steven J. Piet

    2001-01-01

    The Environmental Systems Research (ESR) Program, a part of the Environmental Systems Research and Analysis (ESRA) Program, was implemented to enhance and augment the technical capabilities of the INEEL. Strengthening the Technical capabilities of the INEEL will provide the technical base to serve effectively as the Environmental Management Laboratory for the Office of Environmental Management (EM). This is a progress report for the third year of the ESR Program (FY 2000). A report of activities is presented for the five ESR research investment areas: (1) Transport Aspects of Selective Mass Transport Agents, (2) Chemistry of Environmental Surfaces, (3) Materials Dynamics, (4) Characterization Science, and (5) Computational Simulation of Mechanical and Chemical Systems. In addition to the five technical areas, the report describes activities in the Science and Technology Foundations element of the program, e.g., interfaces between ESR and the EM Science Program (EMSP) and the EM Focus Areas. The five research areas are subdivided into 18 research projects. FY 2000 research in these 18 projects has resulted in more than 50 technical papers that are in print, in press, in review, or in preparation. Additionally, more than 100 presentations were made at professional society meetings nationally and internationally. Work supported by this program was in part responsible for one of our researchers, Dr. Mason Harrup, receiving the Department of Energy’s “Bright Light” and “Energy at 23” awards. Significant accomplishments were achieved. Non-Destructive Assay hardware and software was deployed at the INEEL, enhancing the quality and efficiency of TRU waste characterization for shipment. The advanced tensiometer has been employed at numerous sites around the complex to determine hydrologic gradients in variably saturated vadose zones. An ion trap, secondary ion mass spectrometer (IT-SIMS) was designed and fabricated to deploy at the INEEL site to measure the

  15. Conceptual design and systems analysis of photovoltaic power systems. Volume II. Systems. Revised final report

    Energy Technology Data Exchange (ETDEWEB)

    Pittman, P.F.

    1977-03-01

    Conceptual designs were made and analyses were performed on three types of solar photovoltaic power systems. Included were Residential (1--10 kW), Intermediate (0.1--10 MW), and Central (50--1000 MW) Power Systems to be installed in the 1985 to 2000 time period. Detailed descriptions of each of the three systems studied, descriptions of the necessary subsystems, and discussions of the interfaces between them are presented. Included also are descriptions of system performance and system cost used to perform an economic analysis which assesses the value of each system.

  16. Commercial thermal distribution systems, Final report for CIEE/CEC

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Tengfang; Bechu, Olivier; Carrie, Remi; Dickerhoff, Darryl; Fisk, William; Franconi, Ellen; Kristiansen, Oyvind; Levinson, Ronnen; McWilliams, Jennifer; Wang, Duo; Modera, Mark; Webster, Tom; Ring, Erik; Zhang, Qiang; Huizenga, Charlie; Bauman, Fred; Arens, Ed

    1999-12-01

    According to the California Energy Commission (CEC 1998a), California commercial buildings account for 35% of statewide electricity consumption, and 16% of statewide gas consumption. Space conditioning accounts for roughly 16,000 GWh of electricity and 800 million therms of natural gas annually, and the vast majority of this space conditioning energy passes through thermal distribution systems in these buildings. In addition, 8600 GWh per year is consumed by fans and pumps in commercial buildings, most of which is used to move the thermal energy through these systems. Research work at Lawrence Berkeley National Laboratory (LBNL) has been ongoing over the past five years to investigate the energy efficiency of these thermal distribution systems, and to explore possibilities for improving that energy efficiency. Based upon that work, annual savings estimates of 1 kWh/ft{sup 2} for light commercial buildings, and 1-2 kWh/ft{sup 2} in large commercial buildings have been developed for the particular aspects of thermal distribution system performance being addressed by this project. Those savings estimates, combined with a distribution of the building stock based upon an extensive stock characterization study (Modera et al. 1999a), and technical penetration estimates, translate into statewide saving potentials of 2000 GWh/year and 75 million thermal/year, as well as an electricity peak reduction potential of 0.7 GW. The overall goal of this research program is to provide new technology and application knowledge that will allow the design, construction, and energy services industries to reduce the energy waste associated with thermal distribution systems in California commercial buildings. The specific goals of the LBNL efforts over the past year were: (1) to advance the state of knowledge about system performance and energy losses in commercial-building thermal distribution systems; (2) to evaluate the potential of reducing thermal losses through duct sealing, duct

  17. Commercial thermal distribution systems, Final report for CIEE/CEC

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Tengfang; Bechu, Olivier; Carrie, Remi; Dickerhoff, Darryl; Fisk, William; Franconi, Ellen; Kristiansen, Oyvind; Levinson, Ronnen; McWilliams, Jennifer; Wang, Duo; Modera, Mark; Webster, Tom; Ring, Erik; Zhang, Qiang; Huizenga, Charlie; Bauman, Fred; Arens, Ed

    1999-12-01

    According to the California Energy Commission (CEC 1998a), California commercial buildings account for 35% of statewide electricity consumption, and 16% of statewide gas consumption. Space conditioning accounts for roughly 16,000 GWh of electricity and 800 million therms of natural gas annually, and the vast majority of this space conditioning energy passes through thermal distribution systems in these buildings. In addition, 8600 GWh per year is consumed by fans and pumps in commercial buildings, most of which is used to move the thermal energy through these systems. Research work at Lawrence Berkeley National Laboratory (LBNL) has been ongoing over the past five years to investigate the energy efficiency of these thermal distribution systems, and to explore possibilities for improving that energy efficiency. Based upon that work, annual savings estimates of 1 kWh/ft{sup 2} for light commercial buildings, and 1-2 kWh/ft{sup 2} in large commercial buildings have been developed for the particular aspects of thermal distribution system performance being addressed by this project. Those savings estimates, combined with a distribution of the building stock based upon an extensive stock characterization study (Modera et al. 1999a), and technical penetration estimates, translate into statewide saving potentials of 2000 GWh/year and 75 million thermal/year, as well as an electricity peak reduction potential of 0.7 GW. The overall goal of this research program is to provide new technology and application knowledge that will allow the design, construction, and energy services industries to reduce the energy waste associated with thermal distribution systems in California commercial buildings. The specific goals of the LBNL efforts over the past year were: (1) to advance the state of knowledge about system performance and energy losses in commercial-building thermal distribution systems; (2) to evaluate the potential of reducing thermal losses through duct sealing, duct

  18. Patient Reported Outcomes Measurement Information System (PROMIS) in the upper extremity: the future of outcomes reporting?

    Science.gov (United States)

    Makhni, Eric C; Meadows, Molly; Hamamoto, Jason T; Higgins, John D; Romeo, Anthony A; Verma, Nikhil N

    2017-02-01

    Patient reported outcomes (PROs) serve an integral role in clinical research by helping to determine the impact of clinical care as experienced by the patient. With recent initiatives in health care policy and pay for performance, outcome reporting is now recognized as a policy-driven requirement in addition to a clinical research tool. For outcome measures to satisfy these regulatory requirements and provide value in understanding disease outcomes, they must be responsive and efficient. Recent research has uncovered certain concerns regarding traditional PROs in patients with upper extremity disability and injury. These include lack of consensus regarding selection of PROs for a given diagnoses, inconsistent techniques of administration of the same PROs, and the administrative burden to patients and providers of completing these forms. To address these limitations, emphasis has been placed on streamlining the outcomes reporting process, and, as a result, the National Institutes of Health (NIH) created the Patient Reported Outcomes Measurement Information System (PROMIS). PROMIS forms were created to comprehensively and efficiently measure outcomes across multiple disease states, including orthopedics. These tools exist in computer adaptive testing and short forms with the intention of more efficiently measuring outcomes compared with legacy PROs. The goals of this review are to highlight the main components of PROMIS reporting tools and identify recent use of the scores in the upper extremity literature. The review will also highlight the research and health policy potentials and limitations of implementing PROMIS into everyday orthopedic practice. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  19. 49 CFR 234.9 - Grade crossing signal system failure reports.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Grade crossing signal system failure reports. 234... PLANS Reports and Plans § 234.9 Grade crossing signal system failure reports. Each railroad shall report to FRA within 15 days each activation failure of a highway-rail grade crossing warning system....

  20. Enhanced Geothermal Systems (EGS) R&D Program, Status Report: Foreign Research on Enhanced Geothermal Systems

    Energy Technology Data Exchange (ETDEWEB)

    McLarty, Lynn; Entingh, Daniel

    2000-09-29

    This report reviews enhanced geothermal systems (EGS) research outside the United States. The term ''enhanced geothermal systems'' refers to the use of advanced technology to extract heat energy from underground in areas with higher than average heat flow but where the natural permeability or fluid content is limited. EGS covers the spectrum of geothermal resources from low permeability hydrothermal to hot dry rock.

  1. Report: Cybersecurity Act of 2015 Report - EPA’s Policies and Procedures to Protect Systems With Personally Identifiable Information

    Science.gov (United States)

    Report #16-P-0259, August 10, 2016. The EPA has 30 systems that contain sensitive PII. Safeguarding information and preventing system breaches are essential for ensuring the EPA retains the trust of the American public.

  2. Acoustic Resonance Spectroscopy (ARS) Munition Classification System enhancements. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vela, O.A.; Huggard, J.C.

    1997-09-18

    Acoustic Resonance Spectroscopy (ARS) is a non-destructive evaluation technology developed at the Los Alamos National Laboratory (LANL). This technology has resulted in three generations of instrumentation, funded by the Defense Special Weapons Agency (DSWA), specifically designed for field identification of chemical weapon (CW) munitions. Each generation of ARS instrumentation was developed with a specific user in mind. The ARS1OO was built for use by the U.N. Inspection Teams going into Iraq immediately after the Persian Gulf War. The ARS200 was built for use in the US-Russia Bilateral Chemical Weapons Treaty (the primary users for this system are the US Onsite Inspection Agency (OSIA) and their Russian counterparts). The ARS300 was built with the requirements of the Organization for the Prohibition of Chemical Weapons (OPCW) in mind. Each successive system is an improved version of the previous system based on learning the weaknesses of each and, coincidentally, on the fact that more time was available to do a requirements analysis and the necessary engineering development. The ARS300 is at a level of development that warrants transferring the technology to a commercial vendor. Since LANL will supply the computer software to the selected vendor, it is possible for LANL to continue to improve the decision algorithms, add features where necessary, and adjust the user interface before the final transfer occurs. This paper describes the current system, ARS system enhancements, and software enhancements. Appendices contain the Operations Manual (software Version 3.01), and two earlier reports on enhancements.

  3. Technical Report for Water Circulation Pumping System for Trihalomethanes (THMs)

    Energy Technology Data Exchange (ETDEWEB)

    Bellah, W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-06-08

    The TSWWS was added as an active source of supply to the permit (No. 03-10-13P-003) in 2010, but has never been used due to the potential for formation of trihalomethanes (THMs) in the distribution system. THMs are formed as a by-product when chlorine is used to disinfect water for drinking. THMs are a group of chemicals generally referred to as disinfection by-products (DBPs). THMs result from the reaction of chlorine with organic matter that is present in the water. Some of the THMs are volatile and may easily vaporize into the air. This fact forms the basis of the design of the system discussed in this technical report. In addition, the design is based on the results of a study that has shown success using aeration as a means to reduce TTHMs to within allowable concentration levels with turn-over times as long as ten days. The Primary Drinking Water Standards of Regulated Contaminants Maximum Contaminant Level (MCL) for TTHMs is 80 parts per billion (ppb). No other changes to the existing drinking water distribution system and chlorination operations are anticipated before switching to the TSWWS as the primary drinking water source. The two groundwater wells (Wells 20 and 18) which are currently the primary and backup water sources for the system would be maintained for use as backup supply. In the future, one of the wells may be removed from the system. A permit amendment would be filed at that time if this modification was deemed appropriate.

  4. The bacterial lux reporter system: applications in bacterial localisation studies.

    Science.gov (United States)

    Gahan, Cormac G M

    2012-02-01

    Bacterial production of visible light is a natural phenomenon occurring in marine (Vibrio and Photobacterium) and terrestrial (Photorhabdus) species. The mechanism underpinning light production in these organisms is similar and involves the oxidation of an aldehyde substrate in a reaction catalysed by the bacterial luciferase enzyme. The genes encoding the luciferase and a fatty acid reductase complex which synthesizes the substrate are contained in a single operon (the lux operon). This provides a useful reporter system as cloning the operon into a recipient host bacterium will generate visible light without the requirement to add exogenous substrate. The light can be detected in vivo in the living animal using a sensitive detection system and is therefore ideally suited to bioluminescence imaging protocols. The system has therefore been widely used to track bacteria during infection or colonisation of the host. As bacteria are currently being examined as bactofection vectors for gene delivery, particularly to tumour tissue, the use of bioluminescence imaging offers a powerful means to investigate vector amplification in situ. The implications of this technology for bacterial localization, tumour targeting and gene transfer (bactofection) studies are discussed.

  5. Feasibility of an Ultrasonographic Categorical Reporting System for Thyroid Incidentaloma

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Won Ho; Lee, Hui Joong; Yi, Jae Hyuck; Kim, Yong Sun; Kang, Duk Sik; Park, Ji Young [Kyungpook National University Hospital, Daegu (Korea, Republic of); Kim, Seung Hun [Daegu Veterans Hospital, Daegu (Korea, Republic of)

    2007-12-15

    To evaluate the feasibility of an ultrasonographic category system for the proper management of incidentally found thyroid nodules. We retrospectively evaluated 2,688 patients who had thyroid nodules and underwent ultrasonography- guided fine needle aspiration biopsy. We made an ultrasonographic categorical reporting system by logistic regression analysis for comparison with the pathologic results of cytology and biopsy. The distribution of malignancy probability for benign nodules was 0.07 to 0.23 and for malignant nodules was 0.37 to 0.91 (95% confidence intervals). We stratified the distribution of the probability of malignancy of each nodule into 6 categories (category 0, no nodule: 1, highly suggestive of benignancy: 2, probably benign: 3, indeterminate: 4, probably malignant: and 5, highly suggestive of malignancy) and summarized the representative US findings. We compared the category of each nodule with the pathological results. In nodules with surgically proven pathologic diagnoses, benign lesions were 96.1% (348/361) in category 1 and malignant lesions were 98.6% (139/141) in category 5. We suggest that the ultrasonographic category system for thyroid incidentaloma may provide optimal strategies to manage incidentally found thyroid nodules

  6. Heat pump centered integrated community energy systems: system development. Georgia Institute of Technology final report

    Energy Technology Data Exchange (ETDEWEB)

    Wade, D.W.; Trammell, B.C.; Dixit, B.S.; McCurry, D.C.; Rindt, B.A.

    1979-12-01

    Heat Pump Centered-Integrated Community Energy Systems (HP-ICES) show the promise of utilizing low-grade thermal energy for low-quality energy requirements such as space heating and cooling. The Heat Pump - Wastewater Heat Recovery (HP-WHR) scheme is one approach to an HP-ICES that proposes to reclaim low-grade thermal energy from a community's wastewater effluent. This report develops the concept of an HP-WHR system, evaluates the potential performance and economics of such a system, and examines the potential for application. A thermodynamic performance analysis of a hypothetical system projects an overall system Coefficient of Performance (C.O.P.) of from 2.181 to 2.264 for waste-water temperatures varying from 50/sup 0/F to 80/sup 0/F. Primary energy source savings from the nationwide implementation of this system is projected to be 6.0 QUADS-fuel oil, or 8.5 QUADS - natural gas, or 29.7 QUADS - coal for the period 1980 to 2000, depending upon the type and mix of conventional space conditioning systems which could be displaced with the HP-WHR system. Site-specific HP-WHR system designs are presented for two application communities in Georgia. Performance analyses for these systems project annual cycle system C.O.P.'s of 2.049 and 2.519. Economic analysis on the basis of a life cycle cost comparison shows one site-specific system design to be cost competitive in the immediate market with conventional residential and light commercial HVAC systems. The second site-specific system design is shown through a similar economic analysis to be more costly than conventional systems due mainly to the current low energy costs for natural gas. It is anticipated that, as energy costs escalate, this HP-WHR system will also approach the threshold of economic viability.

  7. Innovative technology evaluation report: Inplant Systems, Inc. SFC 0.5 Oleofiltration system

    Energy Technology Data Exchange (ETDEWEB)

    Wahl, G.; Whitford, K.

    1995-03-01

    The InPlant Systems SFCO.5 Oleofilter is designed to separate mechanically emulsified and some dissolved oil from water. This report summarizes the results of the demonstration of this technology`s ability to separate oil from contaminated ground water.

  8. NOAA-USGS Debris-Flow Warning System - Final Report

    Science.gov (United States)

    ,

    2005-01-01

    Landslides and debris flows cause loss of life and millions of dollars in property damage annually in the United States (National Research Council, 2004). In an effort to reduce loss of life by debris flows, the National Oceanic and Atmospheric Administration's (NOAA) National Weather Service (NWS) and the U.S. Geological Survey (USGS) operated an experimental debris-flow prediction and warning system in the San Francisco Bay area from 1986 to 1995 that relied on forecasts and measurements of precipitation linked to empirical precipitation thresholds to predict the onset of rainfall-triggered debris flows. Since 1995, there have been substantial improvements in quantifying precipitation estimates and forecasts, development of better models for delineating landslide hazards, and advancements in geographic information technology that allow stronger spatial and temporal linkage between precipitation forecasts and hazard models. Unfortunately, there have also been several debris flows that have caused loss of life and property across the United States. Establishment of debris-flow warning systems in areas where linkages between rainfall amounts and debris-flow occurrence have been identified can help mitigate the hazards posed by these types of landslides. Development of a national warning system can help support the NOAA-USGS goal of issuing timely Warnings of potential debris flows to the affected populace and civil authorities on a broader scale. This document presents the findings and recommendations of a joint NOAA-USGS Task Force that assessed the current state-of-the-art in precipitation forecasting and debris-flow hazard-assessment techniques. This report includes an assessment of the science and resources needed to establish a demonstration debris-flow warning project in recently burned areas of southern California and the necessary scientific advancements and resources associated with expanding such a warning system to unburned areas and, possibly, to a

  9. Systems biology and bioinformatics in aging research: a workshop report.

    Science.gov (United States)

    Fuellen, Georg; Dengjel, Jörn; Hoeflich, Andreas; Hoeijemakers, Jan; Kestler, Hans A; Kowald, Axel; Priebe, Steffen; Rebholz-Schuhmann, Dietrich; Schmeck, Bernd; Schmitz, Ulf; Stolzing, Alexandra; Sühnel, Jürgen; Wuttke, Daniel; Vera, Julio

    2012-12-01

    In an "aging society," health span extension is most important. As in 2010, talks in this series of meetings in Rostock-Warnemünde demonstrated that aging is an apparently very complex process, where computational work is most useful for gaining insights and to find interventions that counter aging and prevent or counteract aging-related diseases. The specific topics of this year's meeting entitled, "RoSyBA: Rostock Symposium on Systems Biology and Bioinformatics in Ageing Research," were primarily related to "Cancer and Aging" and also had a focus on work funded by the German Federal Ministry of Education and Research (BMBF). The next meeting in the series, scheduled for September 20-21, 2013, will focus on the use of ontologies for computational research into aging, stem cells, and cancer. Promoting knowledge formalization is also at the core of the set of proposed action items concluding this report.

  10. Efficiency improvements in pipeline transportation systems. Technical report, Task 3

    Energy Technology Data Exchange (ETDEWEB)

    Banks, W. F.; Horton, J. H.

    1977-01-01

    This report identifies those potential energy-conservative pipeline innovations that are most energy- and cost-effective, and formulates recommendations for the R, D, and D programs needed to exploit those opportunities. From a candidate field of over twenty classes of efficiency improvements, eight systems are recommended for pursuit. Most of these possess two highly important attributes: large potential energy savings and broad applicability outside the pipeline industry. The R, D, and D program for each improvement and the recommended immediate next step are described. The eight programs recommended for pursuit are: gas-fired combined-cycle compressor station; internally cooled internal combustion engine; methanol-coal slurry pipeline; methanol-coal slurry-fired and coal-fired engines; indirect-fired coal-burning combined-cycle pump station; fuel-cycle pump station; internal coatings in pipelines; and drag-reducing additives in liquid pipelines.

  11. Urban Integrated Industrial Cogeneration Systems Analysis. Phase II final report

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    Through the Urban Integrated Industrial Cogeneration Systems Analysis (UIICSA), the City of Chicago embarked upon an ambitious effort to identify the measure the overall industrial cogeneration market in the city and to evaluate in detail the most promising market opportunities. This report discusses the background of the work completed during Phase II of the UIICSA and presents the results of economic feasibility studies conducted for three potential cogeneration sites in Chicago. Phase II focused on the feasibility of cogeneration at the three most promising sites: the Stockyards and Calumet industrial areas, and the Ford City commercial/industrial complex. Each feasibility case study considered the energy load requirements of the existing facilities at the site and the potential for attracting and serving new growth in the area. Alternative fuels and technologies, and ownership and financing options were also incorporated into the case studies. Finally, site specific considerations such as development incentives, zoning and building code restrictions and environmental requirements were investigated.

  12. Model based document and report generation for systems engineering

    Science.gov (United States)

    Delp, C.; Lam, D.; Fosse, E.; Lee, Cin-Young

    As Model Based Systems Engineering (MBSE) practices gain adoption, various approaches have been developed in order to simplify and automate the process of generating documents from models. Essentially, all of these techniques can be unified around the concept of producing different views of the model according to the needs of the intended audience. In this paper, we will describe a technique developed at JPL of applying SysML Viewpoints and Views to generate documents and reports. An architecture of model-based view and document generation will be presented, and the necessary extensions to SysML with associated rationale will be explained. A survey of examples will highlight a variety of views that can be generated, and will provide some insight into how collaboration and integration is enabled. We will also describe the basic architecture for the enterprise applications that support this approach.

  13. Quantitative adaptation analytics for assessing dynamic systems of systems: LDRD Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Gauthier, John H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). System Readiness & Sustainment Technologies (6133, M/S 1188); Miner, Nadine E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military & Energy Systems Analysis (6114, M/S 1188); Wilson, Michael L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Resilience and Regulatory Effects (6921, M/S 1138); Le, Hai D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). System Readiness & Sustainment Technologies (6133, M/S 1188); Kao, Gio K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Networked System Survivability & Assurance (5629, M/S 0671); Melander, Darryl J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Software Systems R& D (9525, M/S 1188); Longsine, Dennis Earl [Sandia National Laboratories, Unknown, Unknown; Vander Meer, Jr., Robert C. [SAIC, Inc., Albuquerque, NM (United States)

    2015-01-01

    Our society is increasingly reliant on systems and interoperating collections of systems, known as systems of systems (SoS). These SoS are often subject to changing missions (e.g., nation- building, arms-control treaties), threats (e.g., asymmetric warfare, terrorism), natural environments (e.g., climate, weather, natural disasters) and budgets. How well can SoS adapt to these types of dynamic conditions? This report details the results of a three year Laboratory Directed Research and Development (LDRD) project aimed at developing metrics and methodologies for quantifying the adaptability of systems and SoS. Work products include: derivation of a set of adaptability metrics, a method for combining the metrics into a system of systems adaptability index (SoSAI) used to compare adaptability of SoS designs, development of a prototype dynamic SoS (proto-dSoS) simulation environment which provides the ability to investigate the validity of the adaptability metric set, and two test cases that evaluate the usefulness of a subset of the adaptability metrics and SoSAI for distinguishing good from poor adaptability in a SoS. Intellectual property results include three patents pending: A Method For Quantifying Relative System Adaptability, Method for Evaluating System Performance, and A Method for Determining Systems Re-Tasking.

  14. Systemic lupus erythematosus presenting with eosinophilic enteritis: a case report

    Directory of Open Access Journals (Sweden)

    Kalany Mohammad

    2011-06-01

    Full Text Available Abstract Introduction Systemic lupus erythematosus (SLE is a multisystem disorder that may present with various symptoms. It may involve the gastrointestinal tract in a variety of ways; some of the most well-known ones are transaminitis, lupus mesenteric vasculitis, lupus enteritis and mesenteric vascular leakage. We describe a case of a patient with SLE who presented with a five-month history of diarrhea caused by eosinophilic enteritis. To the best of our knowledge, there are few cases reported in the literature of patients with SLE who initially present with chronic diarrhea due to eosinophilic enteritis. Case presentation A 38-year-old Persian Iranian woman was admitted with a five-month history of diarrhea and abdominal pain. A physical examination showed nothing abnormal. Initially, she had only lymphopenia and mild eosinophilia. No autoimmune or infectious etiology was detected to justify these abnormalities. A thorough evaluation was not helpful in finding the etiology, until she developed a scalp lesion similar to discoid lupus erythematosus. Computed tomography showed small bowel wall thickening. Briefly, she manifested full-blown SLE, and it was revealed that the diarrhea was caused by eosinophilic enteritis. Conclusion Considering SLE in a patient who presents with chronic diarrhea and lymphopenia may be helpful in earlier diagnosis and therapy. This is an original case report of interest to physicians who practice internal medicine, family medicine and gastroenterology.

  15. Infantile Systemic Hyalinosis: A Case Report with a Novel Mutation

    Directory of Open Access Journals (Sweden)

    Siham Al Sinani

    2013-01-01

    Full Text Available Infantile Systemic Hyalinosis (ISH (OMIM 236490 is a rare, progressive and fatal autosomal recessive disorder characterized by multiple subcutaneous skin nodules, gingival hypertrophy, osteopenia, joint contractures, failure to thrive, diarrhea with protein losing enteropathy, and frequent infections. There is diffuse deposition of hyaline material in the skin, gastrointestinal tract, muscle and endocrine glands. It is caused by mutations in the ANTXR2 (also known as CMG2 gene, which encodes a trans-membranous protein involved in endothelial development and basement membrane-extracellular matrix assembly. We describe a child with classical features of ISH presenting in infancy with severe chronic debilitating pain and progressive joint contractures. The diagnosis was confirmed by molecular DNA sequencing of ANTXR2 gene which revealed a novel homozygous mutation not previously reported; 79 bp deletion of the entire exon 11 (c.867_945del, p.E289DfsX22. Although this is the first reported case of ISH in Oman, we believe that the disease is under-diagnosed since children affected with this lethal disease pass away early in infancy prior to establishing a final diagnosis.

  16. OVERSMART Reporting Tool for Flow Computations Over Large Grid Systems

    Science.gov (United States)

    Kao, David L.; Chan, William M.

    2012-01-01

    Structured grid solvers such as NASA's OVERFLOW compressible Navier-Stokes flow solver can generate large data files that contain convergence histories for flow equation residuals, turbulence model equation residuals, component forces and moments, and component relative motion dynamics variables. Most of today's large-scale problems can extend to hundreds of grids, and over 100 million grid points. However, due to the lack of efficient tools, only a small fraction of information contained in these files is analyzed. OVERSMART (OVERFLOW Solution Monitoring And Reporting Tool) provides a comprehensive report of solution convergence of flow computations over large, complex grid systems. It produces a one-page executive summary of the behavior of flow equation residuals, turbulence model equation residuals, and component forces and moments. Under the automatic option, a matrix of commonly viewed plots such as residual histograms, composite residuals, sub-iteration bar graphs, and component forces and moments is automatically generated. Specific plots required by the user can also be prescribed via a command file or a graphical user interface. Output is directed to the user s computer screen and/or to an html file for archival purposes. The current implementation has been targeted for the OVERFLOW flow solver, which is used to obtain a flow solution on structured overset grids. The OVERSMART framework allows easy extension to other flow solvers.

  17. Semantic information extracting system for classification of radiological reports in radiology information system (RIS)

    Science.gov (United States)

    Shi, Liehang; Ling, Tonghui; Zhang, Jianguo

    2016-03-01

    Radiologists currently use a variety of terminologies and standards in most hospitals in China, and even there are multiple terminologies being used for different sections in one department. In this presentation, we introduce a medical semantic comprehension system (MedSCS) to extract semantic information about clinical findings and conclusion from free text radiology reports so that the reports can be classified correctly based on medical terms indexing standards such as Radlex or SONMED-CT. Our system (MedSCS) is based on both rule-based methods and statistics-based methods which improve the performance and the scalability of MedSCS. In order to evaluate the over all of the system and measure the accuracy of the outcomes, we developed computation methods to calculate the parameters of precision rate, recall rate, F-score and exact confidence interval.

  18. Comprehensive Instructional Management System (CIMS) Mathematics Project 1985-1986 End of Year Report. OEA Evaluation Report.

    Science.gov (United States)

    New York City Board of Education, Brooklyn. Office of Educational Assessment.

    This report describes the Comprehensive Instructional Management System (CIMS), which includes a teacher-developed mathematics curriculum for kindergarten through grade seven, corresponding criterion-referenced tests, and a computerized test scoring and reporting management system. The evaluation focused on the five pilot districts in New York…

  19. American Meteor Society Fireball reporting system and mobile application

    Science.gov (United States)

    Hankey, M.

    2014-07-01

    The American Meteor Society (AMS) founded in 1911 pioneered the visual study of meteors and has collected data relating to meteor observations and bright fireballs for over 100 years. In December 2010, the online fireball reporting system was upgraded to an interactive application that utilizes Google Maps and other programmatic methods to pinpoint the observer's location, azimuth and elevation values with a high degree of precision. The AMS has collected 10s of 1000s of witness reports relating to 100s of events each year since the new application was released. Three dimensional triangulation methods that average the data collected from witnesses have been developed that can determine the start and end points of the meteor with an accuracy of saw the fireball. This process is designed to require no button click or user interaction to start and stop the time recording. A count down initiates the process and once the user's phone crosses the plane of azimuth for the end point of the fireball the velocity timer automatically stops. Users are asked to log the recording three times in an effort to minimize error. The three values are then averaged into a final score. Once enough witnesses have filed reports, elapsed time data collected from the mobile phone can be used to determine the velocity of the fireball. With the velocity, trajectory solution and RA/DEC the AMS can plot orbital estimates for significant fireball events reported to the society. Our hope is that overtime this catalog of events will reveal patterns relating to the origins of bright fireballs at certain times of year. The AMS also hopes to be able to associate fireball events reported to the society with known meteor showers when RA/DEC radiant estimates fall close enough to those of known showers. In addition to the enhanced fireball reporting application, the AMS Mobile App provides a meteor shower calendar with information, radiant maps and moon conditions for all upcoming showers. There is also

  20. Community-Level Impacts Projection System (CLIPS). Final report

    Energy Technology Data Exchange (ETDEWEB)

    Monts, J.K.; Bareiss, E.R.

    1979-02-01

    The Community-Level Impacts Projection System includes a set of techniques for providing detailed advance information required for rational planning. The computerized system generates reports which enable the user: to describe the energy development activity in terms of its employment demands and spatial location; to estimate how many in-migrating workers will be required; to estimate the demographic characteristics of the in-migrating workers (e.g., how many elementary school children they will bring); to estimate how many additional secondary employment opportunities (e.g., employment in eating and drinking establishments and grocery stores) will be generated; to estimate what the local area's population levels in various age groups would be both with the project and without it; to estimate community population levels for both the impact case and the baseline case; and to estimate the approximate resource requirements and costs for providing additional municipal facilities and services (e.g., water treatment and distribution, wastewater treatment and collection, gas and electric distribution, police and fire protection, etc.)

  1. Geothermal Energy Resource Development Reporting and Monitoring System

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, Arnold

    1977-02-01

    A Monitoring System is described for reporting, in a timely and comprehensive fashion, the important aspects of the development and utilization of geothermal energy in the United States. The Federal program for geothermal energy addresses technological, environmental, institutional, economic and financial problems. The system for monitoring geothermal resource development has been designed to measure progress in developing geothermal energy online and progress in enabling geothermal resources for development, thereby increasing the potential for future exploitation of geothermal resources, as a consequence of successes in the Federal program in solving technological, environmental, institutional, economic and financial problems that currently impede exploitation of geothermal resources. The key indicator of progress in the development of geothermal energy will be ''power online''. Projections of power online will signal deviations from national goals with sufficient warning time to effect corrective action. Correlation of Federal programs with national progress indicators will show where corrective action is needed. Preliminary indicators of geothermal resource development, based on very limited data, are presented. The analyses are illustrative rather than definitive. Some conclusions are drawn from these analyses.

  2. Pentek concrete scabbling system: Baseline report; Greenbook (chapter)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-31

    The Pentek scabbling technology was tested at Florida International University (FIU) and is being evaluated as a baseline technology. This report evaluates it for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek concrete scabbling system consisted of the MOOSE, SQUIRREL-I, and SQUIRREL-III scabblers. The scabblers are designed to scarify concrete floors and slabs using cross-section, tungsten carbide tipped bits. The bits are designed to remove concrete in 318 inch increments. The bits are either 9-tooth or demolition type. The scabblers are used with a vacuum system designed to collect and filter the concrete dust and contamination that is removed from the surface. The safety and health evaluation conducted during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure was minimal, but noise exposure was significant. Further testing for each of these exposures is recommended. Because of the outdoor environment where the testing demonstration took place, results may be inaccurate. It is feasible that the dust and noise levels will be higher in an enclosed operating environment. Other areas of concern were arm-hand vibration, whole-body vibration, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

  3. Pentek metal coating removal system: Baseline report; Greenbook (chapter)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-31

    The Pentek coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek coating removal system consisted of the ROTO-PEEN Scaler, CORNER-CUTTER{reg_sign}, and VAC-PAC{reg_sign}. They are designed to remove coatings from steel, concrete, brick, and wood. The Scaler uses 3M Roto Peen tungsten carbide cutters while the CORNER-CUTTER{reg_sign} uses solid needles for descaling activities. These hand tools are used with the VAC-PAC{reg_sign} vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure minimal, but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

  4. Advanced radiant combustion system. Final report, September 1989--September 1996

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, J.D.; Carswell, M.G.; Long, F.S.

    1996-09-01

    Results of the Advanced Radiant Combustion System (ARCS) project are presented in this report. This work was performed by Alzeta Corporation as prime contractor under a contract to the U.S. Department of Energy Office of Industrial Technologies as part of a larger DOE program entitled Research Program for Advanced Combustion Systems. The goals of the Alzeta ARCS project were to (a) Improve the high temperature performance characteristics of porous surface ceramic fiber burners, (b) Develop an Advanced Radiant Combustion System (ARCS) that combines combustion controls with an advanced radiant burner, and (c) Demonstrate the advanced burner and controls in an industrial application. Prior to the start of this project, Alzeta had developed and commercialized a porous surface radiant burner, the Pyrocore{trademark} burner. The product had been commercially available for approximately 5 years and had achieved commercial success in a number of applications ranging from small burners for commercial cooking equipment to large burners for low temperature industrial fluid heating applications. The burner was not recommended for use in applications with process temperatures above 1000{degrees}F, which prevented the burner from being used in intermediate to high temperature processes in the chemical and petroleum refining industries. The interest in increasing the maximum use temperature of the burner was motivated in part by a desire to expand the number of applications that could use the Pyrocore product, but also because many of the fluid sensitive heating applications of interest would benefit from the distributed flux characteristic of porous surface burners. Background information on porous surface radiant burners, and a discussion of advantages that would be provided by an improved product, are presented in Section 2.

  5. Prototype Engineered Barrier System Field Test (PEBSFT); Final report

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez, A.L. [ed.; Buscheck, T.; Carlson, R.; Daily, W.; Lee, K.; Lin, Wunan; Mao, Nai-hsien; Ueng, Tzou-Shin; Wang, H.; Watwood, D.

    1991-08-01

    This final report represents a summary of data and interpretations obtained from the Prototype Engineered Barrier System Field Test (PEBSFT) performed in G-Tunnel within the Nevada Test Site. The PEBSFT was conducted to evaluate the applicability of measurement techniques, numerical models, and procedures developed for future field tests that will be conducted in the Exploratory Studies Facilities (ESF) at Yucca Mountain. The primary objective of the test was to provide a basis for determining whether tests planned for the ESF have the potential to be successful. Chapter 1 on high frequency electromagnetic tomography discusses the rock mass electromagnetic permittivity and attenuation rate changes that were measured to characterize the water distribution in the near field of a simulated waste container. The data are used to obtain quantitative estimates of how the moisture content in the rock mass changes during heating and to infer properties of the spatial variability of water distribution, leading to conclusions about the role of fractures in the system. Chapter 2 discusses the changes in rock moisture content detected by the neutron logging probe. Chapter 3 permeability tests discusses the characterization of the in-situ permeability of the fractured tuff around the borehole. The air permeability testing apparatus, the testing procedures, and the data analysis are presented. Chapter 4 describes the moisture collection system installed in the heater borehole to trap and measure the moisture volumes. Chapter 5 describes relative humidity measurements made with the thermocouple psychrometer and capacitance sensors. Chapter 6 discusses gas pressure measurements in the G-Tunnel, addressing the calibration and installation of piezoresistive-gaged transducers. Chapter 7 describes the calibration and installation of thermocouples for temperature measurements. Chapter 8 discusses the results of the PEBSFT.

  6. Progress report on the management of the NEA ISOE system

    Energy Technology Data Exchange (ETDEWEB)

    Lazo, E. [OECD Nuclear Energy Agency, Issy-les-Moulineaux (France)

    1995-03-01

    The Information System on Occupational Exposure (ISOE) was launched by the Organization for Economic Cooperation and Development (OECD), Nuclear Energy Agency (NEA) on 1 January, 1992, to facilitate the communication of dosimetric and ALARA implementation data among nuclear utilities around the world. After two years of operation the System has become a mature interactive network for transfer of data and experience. Currently, 37 utilities from 12 countries, representing 289 power plants, and 12 national regulatory authorities participate in ISOE. Agreements for cooperation also exist between the NEA and the Commission of the European Communities (CEC), and the Paris Center of the WOrld Association of Nuclear Operators (WANO-PC). In addition, the International Atomic Energy Agency (IAEA) is acting as a co-sponsor of ISOE for the participation of non-NEA member countries. Three Regional Technical Centres, Europe, Asia, and Non-NEA member countries, serve to administer the system. The ISOE Network is comprised of three data bases and a communications network at several levels. The three ISOE data bases include the following types of information: NEA1 - annual plant dosimetric information; NEA2 - plant operational characteristics for dose and dose rate reduction; and NEA3 - job specific ALARA practices and experiences. The ISOE communications network has matured greatly during 1992 and 1993. In addition to having access to the above mentioned data bases, participants may now solicit information on new subjects, through the Technical Centres, from all other participants on a real-time basis. Information Sheets on these studies are produced for distribution to all participants. In addition, Topical Reports on areas of interest are produced, and Topical Meetings are held annually.

  7. System and safety studies of accelerator driven transmutation systems. Annual report 1999

    Energy Technology Data Exchange (ETDEWEB)

    Gudowski, Waclaw; Wallenius, Jan; Eriksson, Marcus; Carlsson, Johan; Seltborg, Per; Tucek, Kamil [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Nuclear and Reactor Physics

    2000-05-01

    In 1996, SKB commenced funding of the project 'System and safety studies of accelerator driven transmutation systems and development of a spallation target'. The aim of the project was stated as: Development of a complete code for simulation of transmutation processes in an accelerator driven system. Application of the code for analysis of neutron flux, transmutation rates, reactivity changes, toxicity and radiation damages in the transmutation core. Build up of competence regarding issues related to spallation targets, development of research activities regarding relevant material issues. Performing of basic experiments in order to investigate the adequacy of using the spallation. target as a neutron source for a transmutation system, and participation in the planning and implementation of an international demonstration experiment. In the present report, activities within and related to the framework of the project, performed at the department of Nuclear and Reactor Physics at the Royal Institute of Technology during 1999, are accounted for.

  8. Environmental Systems Research Candidates Program--FY2000 Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Piet, Steven James

    2001-01-01

    The Environmental Systems Research Candidates (ESRC) Program, which is scheduled to end September 2001, was established in April 2000 as part of the Environmental Systems Research and Analysis Program at the Idaho National Engineering and Environmental Laboratory (INEEL) to provide key science and technology to meet the clean-up mission of the U.S. Department of Energy Office of Environmental Management, and perform research and development that will help solve current legacy problems and enhance the INEEL’s scientific and technical capability for solving longer-term challenges. This report documents the progress and accomplishments of the ESRC Program from April through September 2000. The ESRC Program consists of 24 tasks subdivided within four research areas: A. Environmental Characterization Science and Technology. This research explores new data acquisition, processing, and interpretation methods that support cleanup and long-term stewardship decisions. B. Subsurface Understanding. This research expands understanding of the biology, chemistry, physics, hydrology, and geology needed to improve models of contamination problems in the earth’s subsurface. C. Environmental Computational Modeling. This research develops INEEL computing capability for modeling subsurface contaminants and contaminated facilities. D. Environmental Systems Science and Technology. This research explores novel processes to treat waste and decontaminate facilities. Our accomplishments during FY 2000 include the following: • We determined, through analysis of samples taken in and around the INEEL site, that mercury emissions from the INEEL calciner have not raised regional off-INEEL mercury contamination levels above normal background. • We have initially demonstrated the use of x-ray fluorescence to image uranium and heavy metal concentrations in soil samples. • We increased our understanding of the subsurface environment; applying mathematical complexity theory to the problem of

  9. Liver Imaging Reporting and Data System: an expert consensus statement

    Directory of Open Access Journals (Sweden)

    Elsayes KM

    2017-02-01

    Full Text Available Khaled M Elsayes,1 Ania Z Kielar,2 Michelle M Agrons,3 Janio Szklaruk,1 An Tang,4 Mustafa R Bashir,5 Donald G Mitchell,6 Richard K Do,7 Kathryn J Fowler,8 Victoria Chernyak,9 Claude B Sirlin10 1Department of Diagnostic Radiology, The University of Texas MD Anderson Cancer Center, Houston, TX, USA; 2Department of Diagnostic Radiology, University of Ottawa, Ottawa, ON, Canada; 3Department of Diagnostic Radiology, Baylor College of Medicine, Houston, TX, USA; 4Department of Radiology, Radio-Oncology and Nuclear Medicine, Université de Montréal, Montreal, QC, Canada; 5Department of Diagnostic Radiology, Duke University School of Medicine, Durham, NC, 6Department of Diagnostic Radiology, Thomas Jefferson University, Philadelphia, PA, 7Department of Radiology, Memorial Sloan Kettering Cancer Center, New York, NY, 8Mallinckrodt Institute of Radiology, Washington University in Saint Louis, Saint Louis, MO, 9Department of Radiology Albert Einstein College of Medicine, Bronx, New York, NY, 10Department of Diagnostic Radiology, University of California, San Diego, CA, USA Abstract: The increasing incidence and high morbidity and mortality of hepatocellular carcinoma (HCC have inspired the creation of the Liver Imaging Reporting and Data System (LI-RADS. LI-RADS aims to reduce variability in exam interpretation, improve communication, facilitate clinical therapeutic decisions, reduce omission of pertinent information, and facilitate the monitoring of outcomes. LI-RADS is a dynamic process, which is updated frequently. In this article, we describe the LI-RADS 2014 version (v2014, which marks the second update since the initial version in 2011. Keywords: hepatocellular carcinoma, imaging, reporting, cirrhosis, hyperenhancement washout

  10. 76 FR 42706 - Amendment of Inspector General Operations & Reporting System Audit, Assignment, and Timesheet...

    Science.gov (United States)

    2011-07-19

    ... Inspector General Operations & Reporting (IGOR) System Audit, Assignment, and Timesheet Files (EPA-42) to... & Reporting (IGOR) System Audit, Assignment, and Timesheet Files (EPA-42) will be changed to Inspector General... AGENCY Amendment of Inspector General Operations & Reporting System Audit, Assignment, and...

  11. 76 FR 71019 - Amendment of Inspector General's Operation and Reporting (IGOR) System Investigative Files (EPA-40)

    Science.gov (United States)

    2011-11-16

    ... AGENCY Amendment of Inspector General's Operation and Reporting (IGOR) System Investigative Files (EPA-40... General's Operation and Reporting (IGOR) System Investigative Files (EPA-40) to the Inspector General... The Inspector General's Operation and Reporting (IGOR) System Investigative Files (EPA-40) will...

  12. 14 CFR Sec. 1-2 - Waivers from this system of accounts and reports.

    Science.gov (United States)

    2010-01-01

    ... AIR CARRIERS General Accounting Provisions Sec. 1-2 Waivers from this system of accounts and reports. A waiver from any provision of this system of accounts or reports may be made by the BTS upon its... the principles embodied in the provisions of this system of accounts and reports; and the...

  13. STARS - Supportability Trend Analysis and Reporting System for the National Space Transportation System

    Science.gov (United States)

    Graham, Leroy J.; Doempke, Gerald T.

    1990-01-01

    The concept, implementation, and long-range goals of a Supportability Trend Analysis and Reporting System (STARS) for the National Space Transportation System (NSTS) are discussed. The requirement was established as a direct result of the recommendations of the Rogers Commission investigation of the circumstances of the Space Shuttle Challenger accident. STARS outlines the requirements for the supportability-trend data collection, analysis, and reporting requirements that each of the project offices supporting the Space Shuttle are required to provide to the NSTS program office. STARS data give the historic and predictive logistics information necessary for all levels of NSTS management to make safe and cost-effective decisions concerning the smooth flow of Space Shuttle turnaround.

  14. Hospital workers bypass traditional occupational injury reporting systems when reporting patient and visitor perpetrated (type II) violence.

    Science.gov (United States)

    Pompeii, Lisa A; Schoenfisch, Ashley; Lipscomb, Hester J; Dement, John M; Smith, Claudia D; Conway, Sadie H

    2016-10-01

    Under-reporting of type II (patient/visitor-on-worker) violence by workers has been attributed to a lack of essential event details needed to inform prevention strategies. Mixed methods including surveys and focus groups were used to examine patterns of reporting type II violent events among ∼11,000 workers at six U.S. hospitals. Of the 2,098 workers who experienced a type II violent event, 75% indicated they reported. Reporting patterns were disparate including reports to managers, co-workers, security, and patients' medical records-with only 9% reporting into occupational injury/safety reporting systems. Workers were unclear about when and where to report, and relied on their own "threshold" of when to report based on event circumstances. Our findings contradict prior findings that workers significantly under-report violent events. Coordinated surveillance efforts across departments are needed to capture workers' reports, including the use of a designated violence reporting system that is supported by reporting policies. Am. J. Ind. Med. 59:853-865, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  15. Microgrid Controller and Advanced Distribution Management System Survey Report

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Guodong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Starke, Michael R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Herron, Andrew N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-07-01

    A microgrid controller, which serves as the heart of a microgrid, is responsible for optimally managing the distributed energy resources, energy storage systems, and responsive demand and for ensuring the microgrid is being operated in an efficient, reliable, and resilient way. As the market for microgrids has blossomed in recently years, many vendors have released their own microgrid controllers to meet the various needs of different microgrid clients. However, due to the absence of a recognized standard for such controllers, vendor-supported microgrid controllers have a range of functionalities that are significantly different from each other in many respects. As a result the current state of the industry has been difficult to assess. To remedy this situation the authors conducted a survey of the functions of microgrid controllers developed by vendors and national laboratories. This report presents a clear indication of the state of the microgrid-controller industry based on analysis of the survey results. The results demonstrate that US Department of Energy funded research in microgrid controllers is unique and not competing with that of industry.

  16. CMR Shuffler System: Passive Mode Calibration and Certification Report

    Energy Technology Data Exchange (ETDEWEB)

    Frame, Katherine C. [Los Alamos National Laboratory; Gomez, Cipriano D. [Retired CMR-OPS: OPERATIONS; Salazar, William R. [Los Alamos National Laboratory; Mayo, Douglas R. [Los Alamos National Laboratory; Vigil, Georgiana M. [Los Alamos National Laboratory; Crooks, William J. [Los Alamos National Laboratory; Stange, Sy [Los Alamos National Laboratory

    2012-07-20

    Los Alamos National Laboratory has a number of spherical confinement vessels (CVs) remaining from tests involving nuclear materials. These vessels have an inner diameter of 6 feet with 1 to 2 inch thick steel walls. The goal of the Confinement Vessel Disposition (CVD) project is to remove debris and reduce contamination inside the vessels. As debris is removed from the vessels, material will be placed in waste drums. Far-field gamma ray assay will be used to determine when a drum is nearing a {sup 239}Pu equivalent mass of less than 200 g. The drum will then be assayed using a waste drum shuffler operated in passive mode using a neutron coincidence counting method for accountability. This report focuses on the testing and calibration of the CMR waste drum shuffler in passive mode operation. Initial testing was performed to confirm previously accepted measurement parameters. The system was then calibrated using a set of weapons grade Pu (WGPu, {sup 239}Pu > 93%) oxide standards placed inside a 55 gallon drum. The calibration data ranges from Pu mass of 0.5 g to 188.9 g. The CMR waste drum shuffler has been tested and calibrated in passive mode in preparation for safeguards accountability measurements of waste drums containing material removed from CVs for the CVD project.

  17. Status Report on NEAMS System Analysis Module Development

    Energy Technology Data Exchange (ETDEWEB)

    Hu, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Sumner, T. [Argonne National Lab. (ANL), Argonne, IL (United States); Yu, Y. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-12-01

    Under the Reactor Product Line (RPL) of DOE-NE’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, an advanced SFR System Analysis Module (SAM) is being developed at Argonne National Laboratory. The goal of the SAM development is to provide fast-running, improved-fidelity, whole-plant transient analyses capabilities. SAM utilizes an object-oriented application framework MOOSE), and its underlying meshing and finite-element library libMesh, as well as linear and non-linear solvers PETSc, to leverage modern advanced software environments and numerical methods. It also incorporates advances in physical and empirical models and seeks closure models based on information from high-fidelity simulations and experiments. This report provides an update on the SAM development, and summarizes the activities performed in FY15 and the first quarter of FY16. The tasks include: (1) implement the support of 2nd-order finite elements in SAM components for improved accuracy and computational efficiency; (2) improve the conjugate heat transfer modeling and develop pseudo 3-D full-core reactor heat transfer capabilities; (3) perform verification and validation tests as well as demonstration simulations; (4) develop the coupling requirements for SAS4A/SASSYS-1 and SAM integration.

  18. Hanford site tank waste remediation system programmatic environmental review report

    Energy Technology Data Exchange (ETDEWEB)

    Haass, C.C.

    1998-09-03

    The US Department of Energy (DOE) committed in the Tank Waste Remediation System (TWRS) Environmental Impact Statement (EIS) Record of Decision (ROD) to perform future National Environmental Policy Act (NEPA) analysis at key points in the Program. Each review will address the potential impacts that new information may have on the environmental impacts presented in the TWRS EIS and support an assessment of whether DOE`s plans for remediating the tank waste are still pursuing the appropriate plan for remediation or whether adjustments to the program are needed. In response to this commitment, DOE prepared a Supplement Analysis (SA) to support the first of these reevaluations. Subsequent to the completion of the SA, the Phase IB negotiations process with private contractors resulted in several changes to the planned approach. These changes along with other new information regarding the TWRS Program have potential implications for Phase 1 and Phase 2 of tank waste retrieval and waste storage and/or disposal that may influence the environmental impacts of the Phased Implementation alternative. This report focuses on identifying those potential environmental impacts that may require NEPA analysis prior to authorization to begin facility construction and operations.

  19. Technical Evaluation Report 6: Chat and Instant Messaging Systems

    Directory of Open Access Journals (Sweden)

    Jennifer Stein

    2002-04-01

    Full Text Available Text-based conferencing can be both asynchronous (i.e., participants log into the conference at separate times, and synchronous (i.e., interaction takes place in real time. It is thus subject to the same wide variation as the online audio- and video-conferencing methods (see the earlier Reports in this series. Synchronous text-based approaches (e.g., online chat groups and instant messaging systems are highly popular among online users generally owing to their ability to bring together special-interest groups from around the world without cost. In distance education (DE, however, synchronous chat methods are less widely used, owing in part to the problems of arranging for working adults in different time zones to join a discussion group simultaneously. Instant text messaging is more popular among DE users in view of the choice it provides between responding to a message immediately (synchronous communication or after a delay (asynchronous. The different synchronous and asynchronous approaches are likely to become more widely used in parallel with one another, as they are integrated in individual product packages.

  20. Engineered Barrier Systems Thermal-Hydraulic-Chemical Column Test Report

    Energy Technology Data Exchange (ETDEWEB)

    W.E. Lowry

    2001-12-13

    The Engineered Barrier System (EBS) Thermal-Hydraulic-Chemical (THC) Column Tests provide data needed for model validation. The EBS Degradation, Flow, and Transport Process Modeling Report (PMR) will be based on supporting models for in-drift THC coupled processes, and the in-drift physical and chemical environment. These models describe the complex chemical interaction of EBS materials, including granular materials, with the thermal and hydrologic conditions that will be present in the repository emplacement drifts. Of particular interest are the coupled processes that result in mineral and salt dissolution/precipitation in the EBS environment. Test data are needed for thermal, hydrologic, and geochemical model validation and to support selection of introduced materials (CRWMS M&O 1999c). These column tests evaluated granular crushed tuff as potential invert ballast or backfill material, under accelerated thermal and hydrologic environments. The objectives of the THC column testing are to: (1) Characterize THC coupled processes that could affect performance of EBS components, particularly the magnitude of permeability reduction (increases or decreases), the nature of minerals produced, and chemical fractionation (i.e., concentrative separation of salts and minerals due to boiling-point elevation). (2) Generate data for validating THC predictive models that will support the EBS Degradation, Flow, and Transport PMR, Rev. 01.

  1. Photovoltaic systems technology. Final report; Untersuchungen zur photovoltaischen Anlagentechnik. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Bosch, A.; Hoenes, H.P.; Honstetter, K.O.; Jossen, A.; Lehner, G.; Karl, H.; Saupe, G.; Zahir, A.

    1994-07-01

    Different types of batteries as vented, valve regulated (gel typ and adsorbed) lead acid and NiCd ones are investigated. The batteries are operated according to typical solar condition. Development of a block oriented simulation software for simulation and optimization of photovoltaic systems. Both projects are passed on to the ZSW (Zentrum fuer Solar- und Wasserstoff-Forschung, Stuttgart-Ulm). The storage batteries are the weak points in a photovoltaic system. To obtain comparable results we operate all batteries under the same conditions. One aim among others was to qualify ageing effects and maintenance requirements. All batteries are connected to a computer controlled battery test stand. The behaviour of the batteries under investigation is very different. The valve regulated gel typ battery shows a good performance. All NiCd batteries under test show large capacity losses during the test. To optimize the life expectance a specific battery management is necessary for each typ. To satisfy all requirements of the batteries advanced battery control units are necessary. To determine the state of the batteries a battery model or special sensors have to be included in the system. In the report directions are given to solve some of these problems. (orig.) [Deutsch] Verschiedene Batterietypen (verschlossene, geschlossene Bleibatterien, Nickel-Kadmium-Batterien) wurden untersucht und einem solartypischen Dauertest unterzogen. Die Auswertung der Messdaten wurde durchgefuehrt. Ein Simulationsprogramm fuer photovoltaische Anlagen wurde entwickelt. Beide Projekte wurden von ZSW (Zentrum fuer Solarenergie- und Wasserstoff-Forschung, Stuttgart-Ulm) uebernommen. Das Verhalten von Batteriespeichern im solartypischen Betrieb soll charakterisiert und Betriebsstrategien abgeleitet werden, die eine moeglichst lange Lebensdauer der Batteriespeicher gewaehrleisten. Durch ausfuehrliche Simulationsrechnungen sollen photovoltaische Anlagen optimiert werden. Das Verhalten unter den

  2. Systems for nuclear auxiliary power. Annual report, government fiscal year 1975. [Space and subsea systems

    Energy Technology Data Exchange (ETDEWEB)

    1975-09-30

    For the past two decades, programs have been conducted to develop ZrH reactor space power systems. Present development plans for reactor space system components are geared to the development of off-the-shelf standardized reactor components which can be used without modification in either Brayton, thermoelectric (TE), or organic Rankine power systems over a power range of 3 to 15 kW(e). In recent years, national energy programs have highlighted the need to increase production of oil and gas from domestic sources. The US oil and ocean engineering industries are developing subsea production methods and equipment for recovering petroleum from deep water and ice-covered regions. There is the need for a subsea power source for highly reliable, unattended operation. Preliminary studies indicate that ZrH reactor subsea power systems may offer advantages in deep water sites remote from surface support facilities, in regions of severe surface or icing conditions, and in areas of critical environmental problems. A number of major US oil companies have indicated a potential need for a subsea nuclear power system for future offshore operations and have expressed their interest in a concept based on the ZrH reactor and an organic Rankine power conversion system (PCS). Work pursued during FY 1975 were to: (1) investigate standardized ZrH reactor-TE, -Brayton, and -organic Rankine space power systems and components; (2) perform conceptual analysis and design of ZrH reactor-organic Rankine power systems for subsea applications; (3) perform tests on key space system components; (4) conduct fuel hydriding and hydrogen barrier investigations; and (5) perform support system studies. This report describes the activities conducted and results obtained during FY 1975. (DLC)

  3. 14 CFR Section 21 - Introduction to System of Reports

    Science.gov (United States)

    2010-01-01

    ... reporting entity constitutes such an entity, a semiautonomous physically separated operating division of the carrier, or an entity established for reporting purposes only. (h) Two separate entities shall be... shall be treated as an integral part of the reporting entity to which most closely related...

  4. Columbia River Hatchery Reform System-Wide Report.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Dan [Hatchery Scientific Review Group

    2009-04-16

    The US Congress funded the Puget Sound and Coastal Washington Hatchery Reform Project via annual appropriations to the US Fish and Wildlife Service (USFWS) beginning in fiscal year 2000. Congress established the project because it recognized that while hatcheries have a necessary role to play in meeting harvest and conservation goals for Pacific Northwest salmonids, the hatchery system was in need of comprehensive reform. Most hatcheries were producing fish for harvest primarily to mitigate for past habitat loss (rather than for conservation of at-risk populations) and were not taking into account the effects of their programs on naturally spawning populations. With numerous species listed as threatened or endangered under the Endangered Species Act (ESA), conservation of salmon in the Puget Sound area was a high priority. Genetic resources in the region were at risk and many hatchery programs as currently operated were contributing to those risks. Central to the project was the creation of a nine-member independent scientific review panel called the Hatchery Scientific Review Group (HSRG). The HSRG was charged by Congress with reviewing all state, tribal and federal hatchery programs in Puget Sound and Coastal Washington as part of a comprehensive hatchery reform effort to: conserve indigenous salmonid genetic resources; assist with the recovery of naturally spawning salmonid populations; provide sustainable fisheries; and improve the quality and cost-effectiveness of hatchery programs. The HSRG worked closely with the state, tribal and federal managers of the hatchery system, with facilitation provided by the non-profit organization Long Live the Kings and the law firm Gordon, Thomas, Honeywell, to successfully complete reviews of over 200 hatchery programs at more than 100 hatcheries across western Washington. That phase of the project culminated in 2004 with the publication of reports containing the HSRG's principles for hatchery reform and recommendations

  5. Patient-Reported Outcome Questionnaire for Systemic Mastocytosis

    Science.gov (United States)

    2017-01-06

    Aggressive Systemic Mastocytosis (ASM); SM w Assoc Clonal Hema Non-mast Cell Lineage Disease (SM-AHNMD); Mast Cell Leukemia (MCL); Smoldering Systemic Mastocytosis (SSM); Indolent Systemic Mastocytosis (ISM) ISM Subgroup Fully Recruited

  6. Report: Cybersecurity Act of 2015 Report - CSB’s Policies and Procedures to Protect Systems With Personally Identifiable Information

    Science.gov (United States)

    Report #16-P-0254, August 1, 2016. CSB has one system that contains sensitive PII. Safeguarding such information in the possession of the government and preventing its breach is essential to ensuring CSB retains the trust of the American public.

  7. Privacy Act System of Records: Invention Reports Submitted to the EPA, EPA-38

    Science.gov (United States)

    Learn about the Invention Reports Submitted to the EPA System, including who is covered in the system, the purpose of data collection, routine uses for the system's records, and other security procedures.

  8. Deaths in 122 U.S. cities - 1962-2016. 122 Cities Mortality Reporting System

    Data.gov (United States)

    U.S. Department of Health & Human Services — This file contains the complete set of data reported to 122 Cities Mortality Reposting System. The system was retired as of 10/6/2016. While the system was running...

  9. Reporting Vaccine Complications: What Do Obstetricians and Gynecologists Know About the Vaccine Adverse Event Reporting System?

    Directory of Open Access Journals (Sweden)

    L. O. Eckert

    2013-01-01

    Full Text Available Background. Obstetrician-gynecologists are increasingly called upon to be vaccinators as an essential part of a woman’s primary and preventive health care. Despite the established safety of vaccines, vaccine adverse events may occur. A national Vaccine Adverse Event Reporting System (VAERS is a well-established mechanism to track adverse events. However, we hypothesized that many obstetrician-gynecologists are naive to the role and use of VAERS. Methods. We devised a ten-question survey to a sample of ACOG fellows to assess their knowledge and understanding of VAERS. We performed descriptive and frequency analysis for each of the questions and used one-way analysis of variance for continuous and chi-squared for categorical variables. Results. Of the 1000 fellows who received the survey, 377 responded. Only one respondent answered all nine knowledge questions correctly, and 9.2% of physicians had used VAERS. Older physicians were less familiar with VAERS in general and with the specific objectives of VAERS in particular (χ2=10.7,P=.005. Conclusions. Obstetrician-gynecologist familiarity with VAERS is lacking. Only when the obstetrician-gynecologist is completely knowledgeable regarding standard vaccine practices, including the availability and use of programs such as VAERS, will providers be functioning as competent and complete vaccinators.

  10. Summary Report: Multigrid for Systems of Elliptic PDEs

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Barry [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-11-17

    We are interested in determining if multigrid can be effectively applied to the system. The conclusion that I seem to be drawn to is that it is impossible to develop a blackbox multigrid solver for these general systems. Analysis of the system of PDEs must be conducted first to determine pre-processing procedures on the continuous problem before applying a multigrid method. Determining this pre-processing is currently not incorporated in black-box multigrid strategies. Nevertheless, we characterize some system features that will make the system more amenable to multigrid approaches, techniques that may lead to more amenable systems, and multigrid procedures that are generally more appropriate for these systems.

  11. Measuring and reporting of the healthcare systems performances

    OpenAIRE

    2014-01-01

    The health care system is one of the most important social systems of each country. That is the reason for considerable interest among the policy makers in obtaining information that indicates the performance of their health care systems. This information is needed to set up a fundament for monitoring the progress of the health care system over time as well as its comparison with other health care systems. Starting hypothesis of this paper is that there is a need of...

  12. Communicable Disease Reporting Systems in the World: A Systematic Review Article

    Science.gov (United States)

    JANATI, Ali; HOSSEINY, Mozhgan; GOUYA, Mohammad Mehdi; MORADI, Ghobad; GHADERI, Ebrahim

    2015-01-01

    Background: Communicable disease reporting and surveillance system has poor infrastructure and supporters in most of countries. Its quality improvement is a challenge and requires an accurate and efficient care and reporting systems at all levels to achieve new and simple models. This study evaluates reporting systems of communicable diseases using systematic review. Methods: This was a systematic review study. For data collection, we used the following database and search engines: Proquest, Science direct, Pub MED, Scopes, Springer, and EBESCO. For Persian databases, we used SID, Iranmedex and Magiran. Our key words were “Communicable Diseases”, “Notifiable Disease”, “Disease Notification”, “Reporting System”,” Surveillance Systems” and “evaluation”. Two independent researchers reviewed the resources and the results were classified in different domains. Results: From 1889 cases, only 66 resources were studied. The results were classified in several domains, including those who were reporting, reporting methods and procedures, responsibilities and reporting system characteristics, problems and solutions of the report, the reporting process, and receptor level. Conclusion: Disease-reporting system has similar problems in all parts of the world. Change, improve, update and continuous monitoring of the reporting system are very important. Although the reporting process can vary in different regions, but being perfect and timely are important principles in system design. Detailed explanations of tasks and providing appropriate instructions are the most important points to integrate an efficient reporting system. PMID:26744702

  13. Financial Reporting – from Responsibilities to the Quality Assurance Systems

    OpenAIRE

    Maria MANOLESCU; Aureliana ROMAN

    2008-01-01

    Particularities of the financial reporting exigencies suppose realistic approaches which are under the sign of at least two targets: on the one hand the correct understanding of the role of a relevant and reliable financial reporting and of the accountability for financial statements preparing and presenting, and on the other hand the increase in the users interest in the quality of the financial information provided by the financial reporting. There is a specific inter-relationship between t...

  14. An efficiency reporting system for organisational sustainabilitybased on work study techniques

    OpenAIRE

    Sookdeo, Barnes

    2016-01-01

    This article aims to demonstrate that work study techniques must be used to determine standard times for operations and to develop efficiency reporting systems to sustain organisations. Many organisations do not measure their efficiencies and do not have reporting systems. This article presents an efficiency reporting system designed and based on work study techniques that can be used to measure performance. The empirical results of the research instrument supported the need for the system. T...

  15. Evaluation of the Defense Criminal Investigative Organizations’ Defense Incident-Based Reporting System Reporting and Reporting Accuracy

    Science.gov (United States)

    2014-10-29

    and management. Additional data collection and reporting requirements are contained in the Victims’ Rights and Restitution Act of 1990 (49 U.S.C...and reporting requirements of the Uniform Federal Crime Reporting Act of 1988, Victims’ Rights and Restitution , and Brady Handgun Violence Prevention...process instead of the back end (with FBI checks). The DIBRS Database Administrator is working with his FBI CJIS counterpart to work out a plan for the

  16. Columbia River Hatchery Reform System-Wide Report.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Dan [Hatchery Scientific Review Group

    2009-04-16

    The US Congress funded the Puget Sound and Coastal Washington Hatchery Reform Project via annual appropriations to the US Fish and Wildlife Service (USFWS) beginning in fiscal year 2000. Congress established the project because it recognized that while hatcheries have a necessary role to play in meeting harvest and conservation goals for Pacific Northwest salmonids, the hatchery system was in need of comprehensive reform. Most hatcheries were producing fish for harvest primarily to mitigate for past habitat loss (rather than for conservation of at-risk populations) and were not taking into account the effects of their programs on naturally spawning populations. With numerous species listed as threatened or endangered under the Endangered Species Act (ESA), conservation of salmon in the Puget Sound area was a high priority. Genetic resources in the region were at risk and many hatchery programs as currently operated were contributing to those risks. Central to the project was the creation of a nine-member independent scientific review panel called the Hatchery Scientific Review Group (HSRG). The HSRG was charged by Congress with reviewing all state, tribal and federal hatchery programs in Puget Sound and Coastal Washington as part of a comprehensive hatchery reform effort to: conserve indigenous salmonid genetic resources; assist with the recovery of naturally spawning salmonid populations; provide sustainable fisheries; and improve the quality and cost-effectiveness of hatchery programs. The HSRG worked closely with the state, tribal and federal managers of the hatchery system, with facilitation provided by the non-profit organization Long Live the Kings and the law firm Gordon, Thomas, Honeywell, to successfully complete reviews of over 200 hatchery programs at more than 100 hatcheries across western Washington. That phase of the project culminated in 2004 with the publication of reports containing the HSRG's principles for hatchery reform and recommendations

  17. Serious adverse events reported for antiobesity medicines: postmarketing experiences from the EU adverse event reporting system EudraVigilance.

    Science.gov (United States)

    Aagaard, L; Hallgreen, C E; Hansen, E H

    2016-11-01

    Use of antiobesity medicines has been linked with serious cardiac and psychiatric adverse events (AEs). Spontaneous reports can provide information about serious, rare and unknown AEs occurring after the time of marketing. In Europe, information about AEs reported for antiobesity medicines can be accessed in the EudraVigilance (EV) database. Therefore, we aimed to identify and characterise AEs associated with the use of antiobesity medicines in Europe. AE reports submitted for antiobesity medicines (Anatomical Therapeutic Chemical (ATC) group A08A) from 2007 to 2014 and located in the EV database were analysed. AE data were categorised with respect to time, age and sex of patient/consumer, type of reporter, category and seriousness of reported AEs and medicines. Consumer AE reports were compared with reports from other types of reporters with respect to age and sex of consumer, seriousness, system organ class and medicine. The unit of analysis was one AE and one AE report, respectively. We located 4941 AE reports corresponding to 13 957 AEs for antiobesity medicines in the EV database. More than 90% of all AE cases were serious, including 159 deaths. The majority of AE cases were reported for female adults. The majority of serious AEs was reported for orlistat (37%) and rimonabant (22%). The largest share of serious AEs was of the type 'cardiac disorders' (19%) and 'psychiatric disorders' (18%). Consumer AEs reporting differed from other sources with respect to share and seriousness of AEs, type of AEs (system organ class) and medicines (ATC level 5). Many serious AEs were found for antiobesity medicines in EV, and consumers contributed with a relatively high share of reports. Although several products have been withdrawn from the market and new medicines are being marketed, the utilisation of antiobesity medicines is widespread, and therefore systematic monitoring of the safety of these medicines is necessary.

  18. 29 CFR 1602.43 - Commission's remedy for school systems' or districts' failure to file report.

    Science.gov (United States)

    2010-07-01

    ...' failure to file report. Any school system or district failing or refusing to file report EEO-5 when... 29 Labor 4 2010-07-01 2010-07-01 false Commission's remedy for school systems' or districts' failure to file report. 1602.43 Section 1602.43 Labor Regulations Relating to Labor (Continued)...

  19. Annual Report: Advanced Energy Systems Fuel Cells (30 September 2013)

    Energy Technology Data Exchange (ETDEWEB)

    Gerdes, Kirk; Richards, George

    2014-04-16

    The comprehensive research plan for Fuel Cells focused on Solid State Energy Conversion Alliance (SECA) programmatic targets and included objectives in two primary and focused areas: (1) investigation of degradation modes exhibited by the anode/electrolyte/cathode (AEC), development of computational models describing the associated degradation rates, and generation of a modeling tool predicting long term AEC degradation response; and (2) generation of novel electrode materials and microstructures and implementation of the improved electrode technology to enhance performance. In these areas, the National Energy Technology Laboratory (NETL) Regional University Alliance (RUA) team has completed and reported research that is significant to the SECA program, and SECA continued to engage all SECA core and SECA industry teams. Examination of degradation in an operational solid oxide fuel cell (SOFC) requires a logical organization of research effort into activities such as fundamental data gathering, tool development, theoretical framework construction, computational modeling, and experimental data collection and validation. Discrete research activity in each of these categories was completed throughout the year and documented in quarterly reports, and researchers established a framework to assemble component research activities into a single operational modeling tool. The modeling framework describes a scheme for categorizing the component processes affecting the temporal evolution of cell performance, and provides a taxonomical structure of known degradation processes. The framework is an organizational tool that can be populated by existing studies, new research completed in conjunction with SECA, or independently obtained. The Fuel Cell Team also leveraged multiple tools to create cell performance and degradation predictions that illustrate the combined utility of the discrete modeling activity. Researchers first generated 800 continuous hours of SOFC experimental

  20. Privacy preserving data anonymization of spontaneous ADE reporting system dataset.

    Science.gov (United States)

    Lin, Wen-Yang; Yang, Duen-Chuan; Wang, Jie-Teng

    2016-07-18

    To facilitate long-term safety surveillance of marketing drugs, many spontaneously reporting systems (SRSs) of ADR events have been established world-wide. Since the data collected by SRSs contain sensitive personal health information that should be protected to prevent the identification of individuals, it procures the issue of privacy preserving data publishing (PPDP), that is, how to sanitize (anonymize) raw data before publishing. Although much work has been done on PPDP, very few studies have focused on protecting privacy of SRS data and none of the anonymization methods is favorable for SRS datasets, due to which contain some characteristics such as rare events, multiple individual records, and multi-valued sensitive attributes. We propose a new privacy model called MS(k, θ (*) )-bounding for protecting published spontaneous ADE reporting data from privacy attacks. Our model has the flexibility of varying privacy thresholds, i.e., θ (*) , for different sensitive values and takes the characteristics of SRS data into consideration. We also propose an anonymization algorithm for sanitizing the raw data to meet the requirements specified through the proposed model. Our algorithm adopts a greedy-based clustering strategy to group the records into clusters, conforming to an innovative anonymization metric aiming to minimize the privacy risk as well as maintain the data utility for ADR detection. Empirical study was conducted using FAERS dataset from 2004Q1 to 2011Q4. We compared our model with four prevailing methods, including k-anonymity, (X, Y)-anonymity, Multi-sensitive l-diversity, and (α, k)-anonymity, evaluated via two measures, Danger Ratio (DR) and Information Loss (IL), and considered three different scenarios of threshold setting for θ (*) , including uniform setting, level-wise setting and frequency-based setting. We also conducted experiments to inspect the impact of anonymized data on the strengths of discovered ADR signals. With all three

  1. Lower Flathead System Fisheries Study, 1984 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Darling, James E.; Pajak, Paul; Wunderlich, Mary P.

    1984-12-01

    This study was undertaken to assess the effects of Kerr Dam operations on the fisheries of the Lower Flathead System. Supported by Bonneville Power Administration funding, and conducted by the Confederated Salish and Kootenai Tribes, the study began in December of 1982 and is scheduled for completion in December of 1987. This report covers the 1983-84 field season and includes the status of target fish species populations in the Flathead River and tributaries, and initial work in South Bay of Flathead Lake. Additionally it addresses how Kerr operations may effect the reproduction of salmonids and northern pike. Combined trout population estimates for rainbow, brown, brook, and bull trout, averaged 13 fish/km of the lower Flathead River. The number of bull trout and cutthroat trout captured was so low that estimation of their individual populations was not possible. An interim closure to trout harvest on the lower Flathead River was recommended and approved by the Tribal Council until study results can be further analyzed and management options reviewed. Population estimates for northern pike ranged from six/kilometer in poorer habitat, to one hundred three/km in the best habitat in the main Flathead River. Seven pike were radio tagged and their movements monitored. Movements of over 89 km were recorded. One fish left the Flathead River and moved down the Clark Fork to the Plains area. Fish weirs were constructed on the Jocko River and Mission Creek to assess spawning runs of trout from the main river. Thirty-two adult rainbow passed the Jocko weir and twenty-eight passed the Mission weir during the spring spawning season. Twenty adult brown trout were captured at the Jocko weir and five at Mission weir in the fall. The Jocko weir suffered minor damage due to bed load movement during high flows of spring runoff. The structure of trout populations in the lower Flathead River points to spawning and recruitment problems caused by hydroelectric operations and

  2. Enhanced Flight Termination System Study Phase I - IV Reports

    Science.gov (United States)

    2002-11-01

    manufactured by Zeta ( EPSCO ) Corp. The CTS equipment is remotely activated by the RSO in the mission control area. The CTS hardware is similar to the...Command Panel System Operations and Maintenance Manual, August 1998. 14. ZETA ( EPSCO ) Command Transmitter System Maintenance Manual for Model 1376...Command Panel System Operations and Maintenance Manual, August 1998. 14. ZETA ( EPSCO ) Command Transmitter System Maintenance Manual for Model 1376

  3. Solar hot water space heating system. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Van Dam, T

    1979-08-13

    A retrofit solar heating system was installed on Madison Hall at Jordan College, Cedar Springs, Michigan. The system provides heating and domestic water preheating for a campus dormitory. Freeze protection is provided by a draindown system. The building and solar system, construction progress, and design changes are described. Included in appendices are: condensate trap design, structural analysis, pictures of installation, operating instructions, maintenance instructions, and as-built drawings. (MHR)

  4. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, C. LEE COOK DIVISION, DOVER CORPORATION, STATIC PAC (TM) SYSTEM, PHASE II REPORT

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the Static Pac System, Phase II, natural gas reciprocating compressor rod packing manufactured by the C. Lee Cook Division, Dover Corporation. The Static Pac System is designed to seal th...

  5. Enhanced Geothermal Systems (EGS) well construction technology evaluation report.

    Energy Technology Data Exchange (ETDEWEB)

    Capuano, Louis, Jr. (Thermasource Inc.); Huh, Michael; Swanson, Robert (Thermasource Inc.); Raymond, David Wayne; Finger, John Travis; Mansure, Arthur James; Polsky, Yarom; Knudsen, Steven Dell

    2008-12-01

    Electricity production from geothermal resources is currently based on the exploitation of hydrothermal reservoirs. Hydrothermal reservoirs possess three ingredients critical to present day commercial extraction of subsurface heat: high temperature, in-situ fluid and high permeability. Relative to the total subsurface heat resource available, hydrothermal resources are geographically and quantitatively limited. A 2006 DOE sponsored study led by MIT entitled 'The Future of Geothermal Energy' estimates the thermal resource underlying the United States at depths between 3 km and 10 km to be on the order of 14 million EJ. For comparison purposes, total U.S. energy consumption in 2005 was 100 EJ. The overwhelming majority of this resource is present in geological formations which lack either in-situ fluid, permeability or both. Economical extraction of the heat in non-hydrothermal situations is termed Enhanced or Engineered Geothermal Systems (EGS). The technologies and processes required for EGS are currently in a developmental stage. Accessing the vast thermal resource between 3 km and 10 km in particular requires a significant extension of current hydrothermal practice, where wells rarely reach 3 km in depth. This report provides an assessment of well construction technology for EGS with two primary objectives: (1) Determining the ability of existing technologies to develop EGS wells. (2) Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics. Towards these ends, a methodology is followed in which a case study is developed to systematically and quantitatively evaluate EGS well construction technology needs. A baseline EGS well specification is first formulated. The steps, tasks and tools involved in the construction of this prospective baseline EGS well are then explicitly defined by a geothermal drilling contractor in terms of sequence, time and

  6. Blade System Design Study. Part II, final project report (GEC).

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Dayton A. (DNV Global Energy Concepts Inc., Seattle, WA)

    2009-05-01

    As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract period began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its

  7. Solar system installation at Louisville, Kentucky (final report)

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-07

    A contract was awarded in June 1976 for the installation of a solar space heating and domestic hot water system at 2400 Watteroon Trail, Louisville, Kentucky. The overall philosophy used was to install both a liquid and a hot air system retrofitted to the existing office and combined warehouse building. The 1080 sq ft office space is heated first and excess heat is dumped into the warehouse. The two systems offered a unique opportunity to measure the performance and compare results of both air and liquid at one site. The two systems are described in detail and information on the data acquisition system is included.

  8. Institutional applications of solar total energy systems. Third quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-31

    Estimates are presented of the availability of land for solar total energy (STE) systems. The investigation of the external decision processes that affect an STE system choice was continued. The STE system/utility interface was examined, presenting regional time-of-day pricing scenarios and estimates of backup rates. The possible effects that the financial community could have on STE market penetration was considered. Regional and sectoral energy-use profiles were developed. These profiles served as a basis for simulating yearly system performance on an hourly basis to estimate system costs and savings. Preliminary conceptual designs were developed for both thermal and photovoltaic STE systems. Refined system designs and detailed capital cost and performance estimates for the optimized designs are presented. (MHR)

  9. High accuracy integrated global positioning system/inertial navigation system LDRD: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Owen, T.E.; Meindl, M.A.; Fellerhoff, J.R.

    1997-03-01

    This report contains the results of a Sandia National Laboratories Directed Research and Development (LDRD) program to investigate the integration of Global Positioning System (GPS) and inertial navigation system (INS) technologies toward the goal of optimizing the navigational accuracy of the combined GPSANS system. The approach undertaken is to integrate the data from an INS, which has long term drifts, but excellent short term accuracy, with GPS carrier phase signal information, which is accurate to the sub-centimeter level, but requires continuous tracking of the GPS signals. The goal is to maintain a sub-meter accurate navigation solution while the vehicle is in motion by using the GPS measurements to estimate the INS navigation errors and then using the refined INS data to aid the GPS carrier phase cycle slip detection and correction and bridge dropouts in the GPS data. The work was expanded to look at GPS-based attitude determination, using multiple GPS receivers and antennas on a single platform, as a possible navigation aid. Efforts included not only the development of data processing algorithms and software, but also the collection and analysis of GPS and INS flight data aboard a Twin Otter aircraft. Finally, the application of improved navigation system accuracy to synthetic aperture radar (SAR) target location is examined.

  10. Summary report for Group X6: Heat removal system and system analysis

    Energy Technology Data Exchange (ETDEWEB)

    Leung, W

    2005-12-15

    This report is a summary of the activities of the X6 design support for the Heat Removal System (HRS) of MEGAPIE. It can be divided into two main parts: The first part is about the design and manufacturing of he cooling loop (the first 3 chapters), and the second part is dealing with the thermal hydraulic analysis of the overall HRS. This also reflects the change of the X6 activities from design to operation support. The activities of this group are more or less driven by the needs rather than a complete set of tasks given at the start of the project. The first part chronicles the system development. Some of the arguments are probably outdated but are kept in the original form to illustrate the evolution of concepts. The main objective is, of course, to design a heat removal system that can cool the liquid metal spallation target for a 1 MW proton beam i.e. 1.74 mA in 575 MeV). It is also reckoned that the liquid metal, BE (lead-bismuth-eutectic), must be kept liquid even when the proton beam was switched off. This requires either that the cooling system can be shut down or the operating temperature of the coolant be higher than the freezing point of LBE. As for safety concerns, the HRS system must not exert a pressure that exceeds the design pressure of the target beam window in case of a break at the target heat exchanger (THX); this limits the cover gas pressure to about 4 bar(a). These are the basic design principles that carry through the conceptual and engineering design of he system. The organic coolant Diphyl THT was then chosen, because of its wide range of operating temperature (i.e. from 0 to 340 degC) and high boiling point, and a proven record in industrial applications. (author)

  11. Effects and Satisfaction of Medical Device Safety Information Reporting System Using Electronic Medical Record

    Science.gov (United States)

    Jang, Hye Jung; Choi, Young Deuk

    2017-01-01

    Objectives This paper describes an evaluation study on the effectiveness of developing an in-hospital medical device safety information reporting system for managing safety information, including adverse incident data related to medical devices, following the enactment of the Medical Device Act in Korea. Methods Medical device safety information reports were analyzed for 190 cases that took place prior to the application of a medical device safety information reporting system and during a period when the reporting system was used. Also, questionnaires were used to measure the effectiveness of the medical device safety information reporting system. The analysis was based on the questionnaire responses of 15 reporters who submitted reports in both the pre- and post-reporting system periods. Results Sixty-two reports were submitted in paper form, but after the system was set up, this number more than doubled to 128 reports in electronic form. In terms of itemized reporting, a total of 45 items were reported. Before the system was used, 23 items had been reported, but this increased to 32 items after the system was put to use. All survey variables of satisfaction received a mean of over 3 points, while positive attitude, potential benefits, and positive benefits all exceeded 4 points, each receiving 4.20, 4.20, and 4.13, respectively. Among the variables, time-consuming and decision-making had the lowest mean values, each receiving 3.53. Satisfaction was found to be high for system quality and user satisfaction, but relatively low for time-consuming and decision-making. Conclusions We were able to verify that effective reporting and monitoring of adverse incidents and the safety of medical devices can be implemented through the establishment of an in-hospital medical device safety information reporting system that can enhance patient safety and medical device risk management. PMID:28523207

  12. Effects and Satisfaction of Medical Device Safety Information Reporting System Using Electronic Medical Record.

    Science.gov (United States)

    Jang, Hye Jung; Choi, Young Deuk; Kim, Nam Hyun

    2017-04-01

    This paper describes an evaluation study on the effectiveness of developing an in-hospital medical device safety information reporting system for managing safety information, including adverse incident data related to medical devices, following the enactment of the Medical Device Act in Korea. Medical device safety information reports were analyzed for 190 cases that took place prior to the application of a medical device safety information reporting system and during a period when the reporting system was used. Also, questionnaires were used to measure the effectiveness of the medical device safety information reporting system. The analysis was based on the questionnaire responses of 15 reporters who submitted reports in both the pre- and post-reporting system periods. Sixty-two reports were submitted in paper form, but after the system was set up, this number more than doubled to 128 reports in electronic form. In terms of itemized reporting, a total of 45 items were reported. Before the system was used, 23 items had been reported, but this increased to 32 items after the system was put to use. All survey variables of satisfaction received a mean of over 3 points, while positive attitude, potential benefits, and positive benefits all exceeded 4 points, each receiving 4.20, 4.20, and 4.13, respectively. Among the variables, time-consuming and decision-making had the lowest mean values, each receiving 3.53. Satisfaction was found to be high for system quality and user satisfaction, but relatively low for time-consuming and decision-making. We were able to verify that effective reporting and monitoring of adverse incidents and the safety of medical devices can be implemented through the establishment of an in-hospital medical device safety information reporting system that can enhance patient safety and medical device risk management.

  13. Report of the interdepartmental study group on ocean information systems

    National Research Council Canada - National Science Library

    Lapp, P.A

    1979-01-01

    ...'s. This report deals with each of the management functions (renewable resources, non-renewable resources, protection of the marine environment, development and control of navigation, defence, international ocean management and ocean service activities...

  14. Evaluation of a Web-based Error Reporting Surveillance System in a Large Iranian Hospital.

    Science.gov (United States)

    Askarian, Mehrdad; Ghoreishi, Mahboobeh; Akbari Haghighinejad, Hourvash; Palenik, Charles John; Ghodsi, Maryam

    2017-08-01

    Proper reporting of medical errors helps healthcare providers learn from adverse incidents and improve patient safety. A well-designed and functioning confidential reporting system is an essential component to this process. There are many error reporting methods; however, web-based systems are often preferred because they can provide; comprehensive and more easily analyzed information. This study addresses the use of a web-based error reporting system. This interventional study involved the application of an in-house designed "voluntary web-based medical error reporting system." The system has been used since July 2014 in Nemazee Hospital, Shiraz University of Medical Sciences. The rate and severity of errors reported during the year prior and a year after system launch were compared. The slope of the error report trend line was steep during the first 12 months (B = 105.727, P = 0.00). However, it slowed following launch of the web-based reporting system and was no longer statistically significant (B = 15.27, P = 0.81) by the end of the second year. Most recorded errors were no-harm laboratory types and were due to inattention. Usually, they were reported by nurses and other permanent employees. Most reported errors occurred during morning shifts. Using a standardized web-based error reporting system can be beneficial. This study reports on the performance of an in-house designed reporting system, which appeared to properly detect and analyze medical errors. The system also generated follow-up reports in a timely and accurate manner. Detection of near-miss errors could play a significant role in identifying areas of system defects.

  15. 45 CFR 1386.23 - Periodic reports: Protection and Advocacy System.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Periodic reports: Protection and Advocacy System... Advocacy of the Rights of Individuals with Developmental Disabilities § 1386.23 Periodic reports: Protection and Advocacy System. (a) By January 1 of each year the Protection and Advocacy System shall...

  16. Terminology and classification aspects of the Bethesda System for Reporting Thyroid Cytopathology

    Directory of Open Access Journals (Sweden)

    G V Semkina

    2012-12-01

    Full Text Available The article is devoted to the relevance of Betesda System for Reporting Thyroid Cytopathology. This article summarizes recent data on the main differences and advantages of new classification system. Application of the Betesda System for Reporting Thyroid Cytopathology leads to the increased sensitivity and specificity of FNA.

  17. 22 CFR 1101.4 - Reports on new systems of records; computer matching programs.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Reports on new systems of records; computer..., UNITED STATES AND MEXICO, UNITED STATES SECTION PRIVACY ACT OF 1974 § 1101.4 Reports on new systems of records; computer matching programs. (a) Before establishing any new systems of records, or making...

  18. Technical Evaluation Report 25: Open Source Software: Two learning management systems

    Directory of Open Access Journals (Sweden)

    Jim Depow

    2003-10-01

    Full Text Available This report is the second in a two-part series about open source (OSS and free software (FS systems in online education. These are rapidly emerging as alternatives to costly proprietary learning management systems (LMS and content management systems (CMS. This report reviews two LMS systems and one CMS system, all developed on the OSS/ FS principle and available to users free of charge.

  19. Midterm Report Revised. Report #3, Volume 1. Fort Lincoln New Town Education System.

    Science.gov (United States)

    General Learning Corp., Washington, DC.

    Volume I, (Education Plan) of the Midterm Report is a detailed description of the goals, objectives, materials, and activities of the Fort Lincoln New Town (FLNT) elementary school curriculum and includes placement, recordkeeping, and reporting procedures; and provision for special education and pupil personnel services. References are made to…

  20. 77 FR 27243 - Notice of Proposed Information Collection: Disaster Recovery Grant Reporting (DRGR) System

    Science.gov (United States)

    2012-05-09

    ... URBAN DEVELOPMENT Notice of Proposed Information Collection: Disaster Recovery Grant Reporting (DRGR... Information and proposed use: The Disaster Recovery Grant Reporting (DRGR) System is a grants management...: Notice. SUMMARY: The proposed information collection requirement described below will be submitted to...

  1. 78 FR 54267 - 30-Day Notice of Proposed Information Collection: Disaster Recovery Grant Reporting System

    Science.gov (United States)

    2013-09-03

    ... URBAN DEVELOPMENT 30-Day Notice of Proposed Information Collection: Disaster Recovery Grant Reporting..., 2013. A. Overview of Information Collection Title of Information Collection: Disaster Recovery Grant... information and proposed use: The Disaster Recovery Grant Reporting (DRGR) System is a grants...

  2. Next Generation Risk Assessment: Incorporation of Recent Advances in Molecular, Computational, and Systems Biology (Final Report)

    Science.gov (United States)

    EPA announced the release of the final report, Next Generation Risk Assessment: Incorporation of Recent Advances in Molecular, Computational, and Systems Biology. This report describes new approaches that are faster, less resource intensive, and more robust that can help ...

  3. Next Generation Risk Assessment: Incorporation of Recent Advances in Molecular, Computational, and Systems Biology (Final Report)

    Science.gov (United States)

    EPA announced the release of the final report, Next Generation Risk Assessment: Incorporation of Recent Advances in Molecular, Computational, and Systems Biology. This report describes new approaches that are faster, less resource intensive, and more robust that can help ...

  4. Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development Programs—Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    O' Neil, Lori Ross; Assante, Michael; Tobey, D. H.; Conway, T. J.; Vanderhorst, Jr, T. J.; Januszewski, III, J.; Leo, R.; Perman, K.

    2013-07-01

    This document is a summarization of the report, Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development Programs, the final report for phase 2 of the SPSP (DOE workforce study) project.

  5. Informatics in radiology: web-based preliminary reporting system for radiology residents with PACS integration.

    Science.gov (United States)

    O'Connell, Timothy; Chang, Debra

    2012-01-01

    While on call, radiology residents review imaging studies and issue preliminary reports to referring clinicians. In the absence of an integrated reporting system at the training sites of the authors' institution, residents were typing and faxing preliminary reports. To partially automate the on-call resident workflow, a Web-based system for resident reporting was developed by using the free open-source xAMP Web application framework and an open-source DICOM (Digital Imaging and Communications in Medicine) software toolkit, with the goals of reducing errors and lowering barriers to education. This reporting system integrates with the picture archiving and communication system to display a worklist of studies. Patient data are automatically entered in the preliminary report to prevent identification errors and simplify the report creation process. When the final report for a resident's on-call study is available, the reporting system queries the report broker for the final report, and then displays the preliminary report side by side with the final report, thus simplifying the review process and encouraging review of all of the resident's reports. The xAMP Web application framework should be considered for development of radiology department informatics projects owing to its zero cost, minimal hardware requirements, ease of programming, and large support community.

  6. Mechanical Engineering Design Project report: Enabler control systems

    Science.gov (United States)

    Cullen, Christian; Delvecchio, Dave; Scarborough, Alan; Havics, Andrew A.

    1992-01-01

    The Controls Group was assigned the responsibility for designing the Enabler's control system. The requirement for the design was that the control system must provide a simple user interface to control the boom articulation joints, chassis articulation joints, and the wheel drive. The system required controlling hydraulic motors on the Enabler by implementing 8-bit microprocessor boards. In addition, feedback to evaluate positions and velocities must be interfaced to provide the operator with confirmation as well as control.

  7. Development of an affordable data collection, reporting, and analysis system.

    Science.gov (United States)

    Howard, William R

    2003-02-01

    Available professionally designed systems for recording, storing, retrieving, and analyzing patient data (such as treatments delivered, laboratory and pulmonary function test results, ventilator settings, and patient assessments) are prohibitively expensive to many hospitals and clinics. At Tufts-New England Medical Center we designed and implemented a computerized patient data management system that uses relatively inexpensive "personal digital assistants" and inexpensive, commonly-available software. Compared to the pen-and-paper flow sheet system we previously used, our computerized system saves time and money, is accurate and user-friendly, and allows data retrieval and analysis that can improve clinical practice and efficiency. We believe our experience could benefit other institutions.

  8. Computerized Training Systems Project ABACUS: Fifth Year Status Report.

    Science.gov (United States)

    2014-09-26

    and to the Systen Controller using Direct Mfemory Access (MY) links. The value of the direct n~emory access link is that data may be ti-arstitte...in its presen -, form; hcwever, the 11knoi~ledge gained frc:.i the use of this system is expected to be useful in the develop- rent of fuzure systems...one year evaluation of the system. During the measurement phase of the PMA, approxivately seventy-five studen~ts were using the system. Eventually

  9. Remote Excavation System technology evaluation report: Buried Waste Robotics Program

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    This document describes the results from the Remote Excavation System demonstration and testing conducted at the Idaho National Engineering Laboratory during June and July 1993. The purpose of the demonstration was to ascertain the feasibility of the system for skimming soil and removing various types of buried waste in a safe manner and within all regulatory requirements, and to compare the performances of manual and remote operation of a backhoe. The procedures and goals of the demonstration were previously defined in The Remote Excavation System Test Plan, which served as a guideline for evaluating the various components of the system and discussed the procedures used to conduct the tests.

  10. Design Review Closure Report for the SY-101 Rapid Transfer System

    Energy Technology Data Exchange (ETDEWEB)

    POWELL, W.J.

    1999-11-29

    The purpose of this report, is to document closure of design review open items, resulting from design reviews conducted for the SY-101 Respond And Pump In Days (RAPID) Transfer System. Results of the various design reviews were documented in the Design Review Report for The SY-101 Rapid Mitigation System, HNF-4519. In that report, twenty-three open items were identified. In this report the 23 items are reviewed and statused.

  11. Colloquium and Report on Systems Microbiology: Beyond Microbial Genomics

    Energy Technology Data Exchange (ETDEWEB)

    Merry R. Buckley

    2004-12-13

    The American Academy of Microbiology convened a colloquium June 4-6, 2004 to confer about the scientific promise of systems microbiology. Participants discussed the power of applying a systems approach to the study of biology and to microbiology in particular, specifics about current research efforts, technical bottlenecks, requirements for data acquisition and maintenance, educational needs, and communication issues surrounding the field. A number of recommendations were made for removing barriers to progress in systems microbiology and for improving opportunities in education and collaboration. Systems biology, as a concept, is not new, but the recent explosion of genomic sequences and related data has revived interest in the field. Systems microbiology, a subset of systems biology, represents a different approach to investigating biological systems. It attempts to examine the emergent properties of microorganisms that arise from the interplay of genes, proteins, other macromolecules, small molecules, organelles, and the environment. It is these interactions, often nonlinear, that lead to the emergent properties of biological systems that are generally not tractable by traditional approaches. As a complement to the long-standing trend toward reductionism, systems microbiology seeks to treat the organism or community as a whole, integrating fundamental biological knowledge with genomics, metabolomics, and other data to create an integrated picture of how a microbial cell or community operates. Systems microbiology promises not only to shed light on the activities of microbes, but will also provide biology the tools and approaches necessary for achieving a better understanding of life and ecosystems. Microorganisms are ideal candidates for systems biology research because they are relatively easy to manipulate and because they play critical roles in health, environment, agriculture, and energy production. Potential applications of systems microbiology research

  12. Economic incentives to wind systems commercialization. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lotker, M.; Shaw, Jr, R. W.; Adolfson, W. F.; Bernardi, R. P.; Davidoff, P. H.; Eckhart, M. T.; Gunwaldsen, D. S.; Mettam, P. J.; Narayanan, P.; Sillin, J. O.

    1978-08-01

    This assessment of Economic Incentives to Wind Systems Commercialization is an analysis of the quantitative and qualitative impacts of a variety of Government funded economic incentives on Wind Energy Conversion Systems (WECS). The purpose of this study is to achieve better understanding of the relationship between implementation of specific economic incentives for WECS, and the factors surrounding WECS commercial introduction.

  13. Economic incentives to wind systems commercialization. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lotker, M.; Shaw, Jr, R. W.; Adolfson, W. F.; Bernardi, R. P.; Davidoff, P. H.; Eckhart, M. T.; Gunwaldsen, D. S.; Mettam, P. J.; Narayanan, P.; Sillin, J. O.

    1978-08-01

    This assessment of Economic Incentives to Wind Systems Commercialization is an analysis of the quantitative and qualitative impacts of a variety of Government funded economic incentives on Wind Energy Conversion Systems (WECS). The purpose of this study is to achieve better understanding of the relationship between implementation of specific economic incentives for WECS, and the factors surrounding WECS commercial introduction.

  14. Final Report on the Automated Computer Science Education System.

    Science.gov (United States)

    Danielson, R. L.; And Others

    At the University of Illinois at Urbana, a computer based curriculum called Automated Computer Science Education System (ACSES) has been developed to supplement instruction in introductory computer science courses or to assist individuals interested in acquiring a foundation in computer science through independent study. The system, which uses…

  15. The Learning Management System Evolution. CDS Spotlight Report. Research Bulletin

    Science.gov (United States)

    Lang, Leah; Pirani, Judith A.

    2014-01-01

    This Spotlight focuses on data from the 2013 Core Data Service (CDS) to better understand how higher education institutions approach learning management systems (LMSs). Information provided for this Spotlight was derived from Module 8 of the Core Data Service, which contains several questions regarding information systems and applications.…

  16. Model validation studies of solar systems, Phase III. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, L.J.; Winn, C.B.

    1978-12-01

    Results obtained from a validation study of the TRNSYS, SIMSHAC, and SOLCOST solar system simulation and design are presented. Also included are comparisons between the FCHART and SOLCOST solar system design programs and some changes that were made to the SOLCOST program. Finally, results obtained from the analysis of several solar radiation models are presented. Separate abstracts were prepared for ten papers.

  17. Mirror fusion test facility magnet system. Final design report

    Energy Technology Data Exchange (ETDEWEB)

    Henning, C.D.; Hodges, A.J.; VanSant, J.H.; Dalder, E.N.; Hinkle, R.E.; Horvath, J.A.; Scanlan, R.M.; Shimer, D.W.; Baldi, R.W.; Tatro, R.E.

    1980-09-03

    Information is given on each of the following topics: (1) magnet description, (2) superconducting manufacture, (3) mechanical behavior of conductor winding, (4) coil winding, (5) thermal analysis, (6) cryogenic system, (7) power supply system, (8) structural analysis, (9) structural finite element analysis refinement, (10) structural case fault analysis, and (11) structural metallurgy. (MOW)

  18. Expert Systems on Multiprocessor Architectures. Volume 3. Technical Reports

    Science.gov (United States)

    1991-06-01

    nodes, in which they are interested, eliminating all knowledge search. In conventional blackb -oard systems, knowledge sources are units of scheduling...data can therefore be implemented in a distributed manner. " Most blackb ’:trd systems represent the properties of an object simply as lists of values

  19. Collecting and Reporting Real Costs of Information Systems.

    Science.gov (United States)

    Price, Douglas S.

    This document attempts to provide managers and designers of information systems with a usable, practical "building block" system for unit costing. The model is sufficiently flexible to be applicable to a wide variety of cost control requirements; costing elements include project, product, account, organization and function. Design of the cost…

  20. Report on container technology for the ATLAS TDAQ system

    CERN Document Server

    Gadirov, Hamid

    2016-01-01

    My summer student project "Container technology for the Upgrade of the ATLAS Trigger and Data Acquisition (TDAQ) system" focused on the research of container-based (operating system-level) virtualization for TDAQ software. Several tests were performed on Docker platform, all of them showed compatibility for TDAQ software.

  1. Evaluation of the SYSTRAN Automatic Translation System. Report No. 5.

    Science.gov (United States)

    Chaumier, Jacques; And Others

    The Commission of the European Communities has acquired an automatic translation system (SYSTRAN), which has been put into operation on an experimental basis. The system covers translation of English into French and comprises a dictionary for food science and technology containing 25,000 words or inflections and 4,500 expressions. This report…

  2. Verification and Validation of the Coastal Modeling System. Report 3: CMS-Flow: Hydrodynamics

    Science.gov (United States)

    2011-12-01

    ER D C/ CH L TR -1 1- 10 Verification and Validation of the Coastal Modeling System Report 3, CMS -Flow: Hydrodynamics Co as ta l a nd...11-10 December 2011 Verification and Validation of the Coastal Modeling System Report 3, CMS -Flow: Hydrodynamics Alejandro Sánchez, Weiming Wu...of four reports toward the Verification and Validation (V&V) of the Coastal Modeling System ( CMS ). The details of the V&V study specific to the

  3. LARGO hot water system thermal performance test report

    Science.gov (United States)

    1978-01-01

    The thermal performance tests and results on the LARGO Solar Hot Water System under natural environmental conditions is presented. Some objectives of these evaluations are to determine the amount of energy collected, the amount of energy delivered to the household as contributed by solar power supplied to operate the system and auxiliary power to maintain tank temperature at proper level, overall system efficiency and to determine temperature distribution within the tank. The Solar Hot Water system is termed a Dump-type because of the draining system for freeze protection. The solar collector is a single glazed flat plate. An 82-gallon domestic water heater is provided as the energy storage vessel. Water is circulated through the collector and water heater by a 5.3 GPM capacity pump, and control of the pump motor is achieved by a differential temperature controller.

  4. A review of reporting systems and terminology for urine cytology.

    Science.gov (United States)

    Owens, Christopher L; Vandenbussche, Christopher J; Burroughs, Frances H; Rosenthal, Dorothy L

    2013-01-01

    Urine cytology continues to play an important role in the diagnosis and management of urothelial carcinoma, a common cancer of adults with significant morbidity and mortality. Because of its high sensitivity for high-grade urothelial tumors, including lesions that may be cystoscopically occult, urine cytology nicely compliments cystoscopic examination, a method that detects most low-grade tumors. Over the decades, several reporting schemes for urine cytology have been published in the literature, each of which has relative strengths and weaknesses. Unlike cervical cytology, there has not been widespread acceptance and use of any particular reporting scheme for urine cytology studies. Thus, terminology and criteria for urine cytology reporting are not uniform among pathologists, which can frustrate clinicians and hinders interlaboratory comparisons.

  5. Development of case definitions for acute encephalopathy, encephalitis, and multiple sclerosis reports to the vaccine: Adverse Event Reporting System.

    Science.gov (United States)

    Ball, Robert; Halsey, Neal; Braun, M Miles; Moulton, Lawrence H; Gale, Arnold D; Rammohan, Kottil; Wiznitzer, Max; Johnson, Richard; Salive, Marcel E

    2002-08-01

    The Vaccine Adverse Event Reporting System (VAERS), administered by the FDA and CDC, is the U.S. system for surveillance of vaccine adverse events (AE). Acute encephalopathy age or =18 months (EO > or = 18), encephalitis (EI), and multiple sclerosis (MS) after vaccination have been reported to VAERS, but reports often contain insufficient information to validate diagnoses. Standardized case definitions would enhance the utility of VAERS reports for AE surveillance. We developed practical case definitions for classification of VAERS reports, and three neurologists independently applied the definitions to reports submitted in 1993. Inter-observer agreement was assessed, and non-concordant classifications were reviewed in a follow-up conference call. Reports of EO or = 18 (n = 20), EI (n = 15), and MS (n = 16) were classified as "definite" in 7% to 30% of the cases, while 26% to 51% of reports were thought to have insufficient information to make a classification. Agreement among reviewers was good to excellent, (kappa: 0.65 to 0.85) except for EO Elsevier Science Inc.

  6. Colloquium and Report on Systems Microbiology: Beyond Microbial Genomics

    Energy Technology Data Exchange (ETDEWEB)

    Merry R. Buckley

    2004-12-13

    The American Academy of Microbiology convened a colloquium June 4-6, 2004 to confer about the scientific promise of systems microbiology. Participants discussed the power of applying a systems approach to the study of biology and to microbiology in particular, specifics about current research efforts, technical bottlenecks, requirements for data acquisition and maintenance, educational needs, and communication issues surrounding the field. A number of recommendations were made for removing barriers to progress in systems microbiology and for improving opportunities in education and collaboration. Systems biology, as a concept, is not new, but the recent explosion of genomic sequences and related data has revived interest in the field. Systems microbiology, a subset of systems biology, represents a different approach to investigating biological systems. It attempts to examine the emergent properties of microorganisms that arise from the interplay of genes, proteins, other macromolecules, small molecules, organelles, and the environment. It is these interactions, often nonlinear, that lead to the emergent properties of biological systems that are generally not tractable by traditional approaches. As a complement to the long-standing trend toward reductionism, systems microbiology seeks to treat the organism or community as a whole, integrating fundamental biological knowledge with genomics, metabolomics, and other data to create an integrated picture of how a microbial cell or community operates. Systems microbiology promises not only to shed light on the activities of microbes, but will also provide biology the tools and approaches necessary for achieving a better understanding of life and ecosystems. Microorganisms are ideal candidates for systems biology research because they are relatively easy to manipulate and because they play critical roles in health, environment, agriculture, and energy production. Potential applications of systems microbiology research

  7. Report of a national neurosurgical emergency teleconsulting system.

    LENUS (Irish Health Repository)

    Gray, W P

    2012-02-03

    OBJECTIVE: The goal was to develop a low-cost, national, neurosurgical emergency teleconsulting system that is independent of vendor computed tomographic (CT) or magnetic resonance imaging (MRI) scanner type. METHODS: Charge-coupled device scanners are used to digitize hard copies of CT and MRI scans. An enhanced optical density range is achieved by using an algorithm to fuse data from multiple exposures at different integration periods. The system is based on personal computers using Microsoft Windows 3.11. Data are transmitted on a wide-area network at 128 kilobits\\/s, over Integrated Systems Digital Network lines. The network connects both neurosurgical departments in Ireland to all major hospitals with CT\\/MRI scanners. RESULTS: The scanner optical density is 0.05 to 3.0, with 2.24 to 2.5 line pairs\\/mm. Five-megabyte images are transmitted uncompressed in 6 minutes. To date, more than 750 CT and MRI scans have been transmitted. The system is completely automated, and operator acceptance has been very high. Images are automatically stored and displayed at the receiving workstation, where the images can be viewed and manipulated on-screen. This system has significantly enhanced acute neurosurgical patient care. CONCLUSION: The system is cost effective and simple to use, has gained widespread physician acceptance, and delivers an image quality superior to that of many commercially available systems.

  8. Acceptance test report for 241-AW process air system

    Energy Technology Data Exchange (ETDEWEB)

    Kostelnik, A.J.

    1994-10-06

    The acceptance test procedure (ATP) for the compressed air system at building 241-AW-273 was completed on March 11, 1993. The system was upgraded to provide a reliable source of compressed air to the tank farm. The upgrade included the demolition of the existing air compressor and associated piping, as well as the installation of a new air compressor with a closed loop cooling system. A compressed air cross-tie was added to allow the process air compressor to function as a back-up to the existing instrument air compressor. The purpose of the ATP was to achieve three primary objectives: verify system upgrade in accordance with the design media; provide functional test of system components and controls; and prepare the system for the Operational Test. The ATP was successfully completed with thirteen exceptions, which were resolved prior to completing the acceptance test. The repaired exceptions had no impact to safety or the environment and are briefly summarized. Testing ensured that the system was installed per design, that its components function as required and that it is ready for operational testing and subsequent turnover to operations.

  9. Advanced turbine systems program conceptual design and product development. Task 3 -- System selection; Topical report

    Energy Technology Data Exchange (ETDEWEB)

    White, D.J.

    1994-07-01

    Solar Turbines Incorporated has elected to pursue an intercooled and recuperated (ICR) gas turbine system to exceed the goals of the DOE Advanced Turbine Systems (ATS) program, which are to develop and commercialize an industrial gas turbine system that operates at thermal efficiencies at least 15% higher than 1991 products, and with emissions not exceeding eight ppmv NOx and 20 ppmv CO and UHC. Solar`s goal is to develop a commercially viable industrial system (3--20 MW) driven by a gas turbine engine with a thermal efficiency of 50% (ATS50), with the flexibility to meet the differing operational requirements of various markets. Dispersed power generation is currently considered to be the primary future target market for the ICR in the 5--15 MW size class. The ICR integrated system approach provides an ideal candidate for the assumed dispersed power market, with its small footprint, easy transportability, and environmental friendliness. In comparison with other systems that use water or toxic chemicals such as ammonia for NOx control, the ICR has no consumables other than fuel and air. The low pressure ratio of the gas turbine engine also is favorable in that less parasitic power is needed to pump the natural gas into the combustor than for simple-cycle machines. Solar has narrowed the ICR configuration to two basic approaches, a 1-spool, and a 2-spool version of the ATS50. The 1-spool engine will have a lower first-cost but lower part-power efficiencies. The 2-spool ATS may not only have better part-power efficiency, its efficiency will also be less sensitive to reduced turbine rotor inlet temperature levels. Thus hot-end parts life can be increased with only small sacrifices in efficiency. The flexibility of the 2-spool arrangement in meeting customer needs is its major advantage over the 1-spool. This Task 3 Topical Report is intended to present Solar`s preliminary system selection based upon the initial trade-off studies performed to date.

  10. Advanced turbine systems program conceptual design and product development. Task 3 -- System selection; Topical report

    Energy Technology Data Exchange (ETDEWEB)

    White, D.J.

    1994-07-01

    Solar Turbines Incorporated has elected to pursue an intercooled and recuperated (ICR) gas turbine system to exceed the goals of the DOE Advanced Turbine Systems (ATS) program, which are to develop and commercialize an industrial gas turbine system that operates at thermal efficiencies at least 15% higher than 1991 products, and with emissions not exceeding eight ppmv NOx and 20 ppmv CO and UHC. Solar`s goal is to develop a commercially viable industrial system (3--20 MW) driven by a gas turbine engine with a thermal efficiency of 50% (ATS50), with the flexibility to meet the differing operational requirements of various markets. Dispersed power generation is currently considered to be the primary future target market for the ICR in the 5--15 MW size class. The ICR integrated system approach provides an ideal candidate for the assumed dispersed power market, with its small footprint, easy transportability, and environmental friendliness. In comparison with other systems that use water or toxic chemicals such as ammonia for NOx control, the ICR has no consumables other than fuel and air. The low pressure ratio of the gas turbine engine also is favorable in that less parasitic power is needed to pump the natural gas into the combustor than for simple-cycle machines. Solar has narrowed the ICR configuration to two basic approaches, a 1-spool, and a 2-spool version of the ATS50. The 1-spool engine will have a lower first-cost but lower part-power efficiencies. The 2-spool ATS may not only have better part-power efficiency, its efficiency will also be less sensitive to reduced turbine rotor inlet temperature levels. Thus hot-end parts life can be increased with only small sacrifices in efficiency. The flexibility of the 2-spool arrangement in meeting customer needs is its major advantage over the 1-spool. This Task 3 Topical Report is intended to present Solar`s preliminary system selection based upon the initial trade-off studies performed to date.

  11. Power Systems Development Facility. First quarterly report, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The objective of this project, herein referred to as the Power Systems Development Facility (PSDF), is to evaluate hot gas particle control technologies using coal derived gas streams. This project entails the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device (PCD) issues to be addressed include the integration of the PCDs into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scale-up of particulate control systems to commercial size.

  12. Cooperative Telerobotic Retrieval system Phase 1 technology evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    Hyde, R.A.; Croft, K.M.

    1995-03-01

    This document describes the results from the Cooperative Telerobotic Retrieval demonstration and testing conducted at the Idaho National Engineering Laboratory during December 1994 and January 1995. The purpose of the demonstration was to ascertain the feasibility of the system for deploying tools both independently and cooperatively for supporting remote characterization and removal of buried waste in a safe manner and in compliance with all regulatory requirements. The procedures and goals of the demonstration were previously defined in the Cooperative Telerobotic Retrieval System Test Plan for Fiscal Year 1994, which served as a guideline for evaluating the system.

  13. LDRD final report on a unified linear reference system

    Energy Technology Data Exchange (ETDEWEB)

    Espinoza, J. Jr.; Mackoy, R.D. [Sandia National Labs., Albuquerque, NM (United States). Decision Support Systems Software Engineering Dept.; Fletcher, D.R. [Univ. of New Mexico, Albuquerque, NM (United States). Alliance for Transportation Research

    1997-06-01

    The purpose of the project was to describe existing deficiencies in Geographic Information Systems for transportation (GIS-T) applications and prescribe solutions that would benefit the transportation community in general. After an in-depth literature search and much consultation with noted transportation experts, the need for a common linear reference system that integrated and supported the planning and operational needs of the transportation community became very apparent. The focus of the project was set on a unified linear reference system and how to go about its requirements definition, design, implementation, and promulgation to the transportation community.

  14. Fielding The Automated Container Offering System: An interim report

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, B. (EG and G Idaho, Inc., Idaho Falls, ID (USA)); Rochette, D. (Army Artificial Intelligence Center, Washington, DC (USA)); Crandell, J. (Military Traffic Management Command, Falls Church, VA (USA))

    1990-01-01

    The Automated Container Offering System (TACOS) is a cargo booking assistant currently being fielded in the International Traffic Directorate of the Military Traffic Management Command (MTMC). The expert system automates the selection process for type and size of SEAVAN containers, ports, carrier, and ship for containerized military cargo moving from the continental US to Europe. It is designed to perform all processing on simple cases and provide assistance to the human booker on complex cases. MTMC processes requests for {approximately}1000 containers per week on these routes. This paper is a case history which describes factors guiding development of TACOS to illustrate several themes which occur in other (military) logistics expert system projects.

  15. SOFC/TEG hybrid mCHP system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    2012-03-15

    The starting point for this project have been the challenge has been to develop a cost effective solution with long term stability. This is where a focused effort in a strong consortium covering material research, module development and manufacture as well as device design and optimization can make a real difference. In March 2010 the SOFTEG phase II project was initiated and a cooperation organization was established to implement the project as a development and demonstration project involving the staff from all project partners. The project is now completed with excellent and documented outcome. The final results by Alpcon have been demonstration as a TEG-based mCHP system calls CHP Dual Engine Power System, which will be applicable as both a standalone TEG-CHP hybrid system, but also as an auxiliary power unit and power booster for the SOFC system. However the SOFC system cannot cover the household's heat demand alone so it is necessary to combine a SOFC system together with a water heater/boiler system to cover the peak heat demand of a residential house or a complex building. The SOFTEG project partners achieved significant results that mainly can be outlined as following: 1) University of Aarhus has improved the thermal stability of ZnSb by optimizing the concentration of Nano composite material. 2) The grain size and its influence on the sintering process by spark plasma method are investigated by Aarhus University, but further work seems to be necessary. 3) The TE material is going to commercialization by Aarhus University. 4) Aalborg University has prepared simulation tools for complex thermoelectric simulation in non-steady state condition. 5) The new type DCDC interleaved converter using the MPPT system for optimal power tracing is designed, build and tested by Aalborg University in cooperation with Alpcon. This task is included overall system design, control system implementation and power electronic control design. 6) Full scale practical

  16. Advanced Supermarket Refrigeration/Heat Recovery Systems. Country Report, Denmark

    DEFF Research Database (Denmark)

    Knudsen, Hans-Jørgen Høgaard; Christensen, K. G.

    Annex 26 is the first international project under the IEA Heat Pump Programme that links refrigeration and heat pump technology. Recovering heat from advanced supermarket refrigeration systems for space and water heating seems obvious and is beneficial for owners and operators. Because the great...... conclusions as far energy conservation and TEWI reduction is concerned. The conclusion justify that advanced supermarket systems with heat recovery should receive great attention and support. And there is still further research needed in several areas. The Annex also included a thorough system analyses...

  17. Intergovernmental Advanced Stationary PEM Fuel Cell System Demonstration Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Rich Chartrand

    2011-08-31

    A program to complete the design, construction and demonstration of a PEMFC system fuelled by Ethanol, LPG or NG for telecom applications was initiated in October 2007. Early in the program the economics for Ethanol were shown to be unfeasible and permission was given by DOE to focus on LPG only. The design and construction of a prototype unit was completed in Jun 2009 using commercially available PEM FC stack from Ballard Power Systems. During the course of testing, the high pressure drop of the stack was shown to be problematic in terms of control and stability of the reformer. Also, due to the power requirements for air compression the overall efficiency of the system was shown to be lower than a similar system using internally developed low pressure drop FC stack. In Q3 2009, the decision was made to change to the Plug power stack and a second prototype was built and tested. Overall net efficiency was shown to be 31.5% at 3 kW output. Total output of the system is 6 kW. Using the new stack hardware, material cost reduction of 63% was achieved over the previous Alpha design. During a November 2009 review meeting Plug Power proposed and was granted permission, to demonstrate the new, commercial version of Plug Power's telecom system at CERL. As this product was also being tested as part of a DOE Topic 7A program, this part of the program was transferred to the Topic 7A program. In Q32008, the scope of work of this program was expanded to include a National Grid demonstration project of a micro-CHP system using hightemperature PEM technology. The Gensys Blue system was cleared for unattended operation, grid connection, and power generation in Aug 2009 at Union College in NY state. The system continues to operate providing power and heat to Beuth House. The system is being continually evaluated and improvements to hardware and controls will be implemented as more is learned about the system's operation. The program is instrumental in improving the

  18. Final Report. Novel Behavior of Ferromagnet/Superconductor Hybrid Systems

    Energy Technology Data Exchange (ETDEWEB)

    Birge, Norman [Michigan State Univ., East Lansing, MI (United States)

    2016-09-26

    Final report for grant DE-FG02-06ER46341. This work has produced a most convincing experimental demonstration that spin-triplet supercurrent can appear in Josephson junctions containing ferromagnetic materials, even when the superconducting electrodes are conventional, spin-singlet superconductors.

  19. Enhanced Geothermal Systems (EGS) Well Construction Technology Evaluation Report

    Energy Technology Data Exchange (ETDEWEB)

    Polsky, Yarom [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Capuano, Louis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Finger, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Huh, Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Knudsen, Steve [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chip, A.J. Mansure [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Raymond, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Swanson, Robert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2008-12-01

    This report provides an assessment of well construction technology for EGS with two primary objectives: 1. Determining the ability of existing technologies to develop EGS wells. 2. Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics.

  20. Managing Suspicious Activity Reporting Systems at Small Agency Police Departments

    Science.gov (United States)

    2012-09-01

    X X 58,392 18 Clovis X 93,246 19 Colton X 50,495 20 Compton-LASD X X 93,970 53 Suspicious Activity Reporting Population... Clovis Cupertino Diamond Bar Folsom Glendora Hesperia Indio Laguena Nigel Lamesa Lynwood Merced

  1. Technical Evaluation Report 29: Integrated Learning Management Systems

    Directory of Open Access Journals (Sweden)

    Linda Schwartz

    2004-04-01

    Full Text Available Four integrated learning management packages were reviewed: CentraOne, IntraLearn, Lyceum, and Silicon Chalk. These products provide different combinations of synchronous and asynchronous tools. The current report examines the products in relation to their specific value for distance educators and students.

  2. Project W-420 Stack Monitoring system upgrades conceptual design report

    Energy Technology Data Exchange (ETDEWEB)

    TUCK, J.A.

    1998-11-06

    This document describes the scope, justification, conceptual design, and performance of Project W-420 stack monitoring system upgrades on six NESHAP-designated, Hanford Tank Farms ventilation exhaust stacks.

  3. Highway vehicle systems contractors coordination meeting. Seventeenth summary report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    Separate abstracts was prepared for each of the 62 papers presented at the Contractors' Coordination meeting on highway vehicle systems. One paper had previously appeared in DOE's data base.

  4. Case Report: An atypical case of systemic lupus erythematosus ...

    African Journals Online (AJOL)

    Results: She had a favorable clinical response and continues to be followed up as an outpatient.Conclusion: Systemic lupus erythematosus can be difficult diagnosis to make as it may present with atypical features.

  5. Codes, standards, and PV power systems. A 1996 status report

    Energy Technology Data Exchange (ETDEWEB)

    Wiles, J

    1996-06-01

    As photovoltaic (PV) electrical power systems gain increasing acceptance for both off-grid and utility-interactive applications, the safety, durability, and performance of these systems gains in importance. Local and state jurisdictions in many areas of the country require that all electrical power systems be installed in compliance with the requirements of the National Electrical Code{reg_sign} (NEC{reg_sign}). Utilities and governmental agencies are now requiring that PV installations and components also meet a number of Institute of Electrical and Electronic Engineers (IEEE) standards. PV installers are working more closely with licensed electricians and electrical contractors who are familiar with existing local codes and installation practices. PV manufacturers, utilities, balance of systems manufacturers, and standards representatives have come together to address safety and code related issues for future PV installations. This paper addresses why compliance with the accepted codes and standards is needed and how it is being achieved.

  6. Improved Controls for Fusion RF Systems. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Casey, Jeffrey A. [Rockfield Research Inc., Las Vegas, NV (United States)

    2011-11-08

    We have addressed the specific requirements for the integrated systems controlling an array of klystrons used for Lower Hybrid Current Drive (LHCD). The immediate goal for our design was to modernize the transmitter protection system (TPS) for LHCD on the Alcator C-Mod tokamak at the MIT Plasma Science and Fusion Center (MIT-PSFC). Working with the Alcator C-Mod team, we have upgraded the design of these controls to retrofit for improvements in performance and safety, as well as to facilitate the upcoming expansion from 12 to 16 klystrons. The longer range goals to generalize the designs in such a way that they will be of benefit to other programs within the international fusion effort was met by designing a system which was flexible enough to address all the MIT system requirements, and modular enough to adapt to a large variety of other requirements with minimal reconfiguration.

  7. Solid oxide fuel cell systems development. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    The main objective in this project has been to develop a generic and dynamic tool for SOFC systems simulation and development. Developing integrated fuel cell systems is very expensive and therefore having the right tools to reduce the development cost and time to market for products becomes an important feature. The tools developed in this project cover a wide range of needs in Dantherm Power, R and D, and can be divided into 3 categories: 1. Component selection modeling; to define component specification requirements and selection of suppliers. 2. Application simulation model built from scratch, which can simulate the interface between customer demand and system output and show operation behavior for different control settings. 3. System operation strategy optimization with respect to operation cost and customer benefits. a. Allows to see how system size, in terms of electricity and heat output, and operation strategy influences a specific business case. b. Gives a clear overview of how a different property, in the system, affects the economics (e.g. lifetime, electrical and thermal efficiency, fuel cost sensitivity, country of deployment etc.). The main idea behind the structure of the tool being separated into 3 layers is to be able to service different requirements, from changing stakeholders. One of the major findings in this project has been related to thermal integration between the existing installation in a private household and the fuel cell system. For a normal family requiring 4500 kWh of electricity a year, along with the possibility of only running the system during the heating season (winter), the heat storage demand is only 210kWh of heat with an approximate value of Dkr 160,- in extra gas consumption. In this case, it would be much more cost effective to dump the heat, in the house, and save the expense of adding heat storage to the system. This operation strategy is only valid in Denmark for the time being, since the feed-In-Tariff allows for a

  8. Performance of the Defense Acquisition System. 2014 Annual Report

    Science.gov (United States)

    2014-06-13

    contractors to “win the franchise ” to become the sole-source producer of a system. Contractors are often willing to accept lower development...margins to win this production franchise . 86 Performance of the Defense Acquisition System, 2014 Figure 3-1. Final Margin on MDAP Development and...profits if the contractors determine the longer-term benefits from “winning the franchise ” form a good investment. Both types of sole-source contracts

  9. Integrated Nuclear-Renewable Energy Systems: Foundational Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Bragg-Sitton, Shannon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ruth, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zinaman, Owen [National Renewable Energy Lab. (NREL), Golden, CO (United States); Forsberg, Charles [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Collins, John [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-08-01

    The U.S. Department of Energy (DOE) recognizes the need to transform the energy infrastructure of the U.S. and elsewhere to systems that can drastically reduce environmental impacts in an efficient and economically viable manner while utilizing both hydrocarbon resources and clean energy generation sources. Thus, DOE is supporting research and development that could lead to more efficient utilization of clean energy generation sources, including renewable and nuclear options. A concept being advanced by the DOE Offices of Nuclear Energy (NE) and Energy Efficiency and Renewable Energy (EERE) is tighter coupling of nuclear and renewable energy sources in a manner that produces new energy currency for the combined electricity grid, industrial manufacturing, and the transportation energy sectors. This integration concept has been referred to as a “hybrid system” that is capable of providing the right type of energy, at the right time, in the right place. At the direction of DOE-NE and DOE-EERE leadership, project leads at Idaho National Laboratory (INL), National Renewable Energy Laboratory (NREL) and Massachusetts Institute of Technology (MIT) have identified and engaged stakeholders in discussing integrated energy systems that would optimize renewable and nuclear energy integration on a region-by-region basis. Subsequent work will entail conduct of technical, economic, environmental and socio-political evaluations of the leading integrated system options based on a set of criteria established with stakeholder input. The Foundational Workshop for Integrated Nuclear – Renewable Energy Systems was organized around the following objectives: 1. Identify and refine priority region-specific opportunities for integrated nuclear-renewable energy systems in the U.S.; 2. Select Figures of Merit (FOM) to rank and prioritize candidate systems; 3. Discuss enabling technology development needs; 4. Identify analysis requirements, capabilities and gaps to estimate FOM for

  10. Solar heating system installed at Jackson, Tennessee. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    The solar energy heating system installed at the Coca-Cola Bottling Works in Jackson, Tennessee is described. The system consists of 9480 square feet of Owens-Illinois evacuated tubular solar collectors with attached specular cylindrical reflectors and will provide space heating for the 70,000 square foot production building in the winter, and hot water for the bottle washing equipment the remainder of the year. Component specifications and engineering drawings are included. (WHK)

  11. Langerhans cell histiocytosis involving central nervous system: a case report

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Won Jin; Park, Dong Woo; Lee, Seung Ro; Hahm, Chang Kok; Ju, Kyung Bin [Hanyang University College of Medicine, Seoul (Korea, Republic of); Kim, Sung Tae [Ulsan University College of Medicine, Seoul (Korea, Republic of)

    1997-01-01

    Langerhans cell histiocytosis(LCH) is a systemic disorder characterized by idiopathic proliferation of histiocytes in the reticuloendothelial system; CNS involvement outside the hypothalamus or pituitary gland is uncommon. We present a case of LCH involving the brainstem, cerebellum, and temporal lobes, and also showing hypothalamic involvement. The lesions were isointense or hypointense on T1WI and hyperintense on T2WI, and showed multifocal enhancing nodules on post-contrast CT and Gd-enhanced MRI.

  12. Center for Advanced Biofuel Systems (CABS) Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Kutchan, Toni M. [Donald Danforth Plant Science Center, St. Louis, MO (United States)

    2015-12-02

    One of the great challenges facing current and future generations is how to meet growing energy demands in an environmentally sustainable manner. Renewable energy sources, including wind, geothermal, solar, hydroelectric, and biofuel energy systems, are rapidly being developed as sustainable alternatives to fossil fuels. Biofuels are particularly attractive to the U.S., given its vast agricultural resources. The first generation of biofuel systems was based on fermentation of sugars to produce ethanol, typically from food crops. Subsequent generations of biofuel systems, including those included in the CABS project, will build upon the experiences learned from those early research results and will have improved production efficiencies, reduced environmental impacts and decreased reliance on food crops. Thermodynamic models predict that the next generations of biofuel systems will yield three- to five-fold more recoverable energy products. To address the technological challenges necessary to develop enhanced biofuel systems, greater understanding of the non-equilibrium processes involved in solar energy conversion and the channeling of reduced carbon into biofuel products must be developed. The objective of the proposed Center for Advanced Biofuel Systems (CABS) was to increase the thermodynamic and kinetic efficiency of select plant- and algal-based fuel production systems using rational metabolic engineering approaches grounded in modern systems biology. The overall strategy was to increase the efficiency of solar energy conversion into oils and other specialty biofuel components by channeling metabolic flux toward products using advanced catalysts and sensible design:1) employing novel protein catalysts that increase the thermodynamic and kinetic efficiencies of photosynthesis and oil biosynthesis; 2) engineering metabolic networks to enhance acetyl-CoA production and its channeling towards lipid synthesis; and 3) engineering new metabolic networks for the

  13. FY2013 Vehicle and Systems Simulation and Testing R&D Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-02-01

    FY 2013 annual report focuses on the following areas: vehicle modeling and simulation, component and systems evaluations, laboratory and field evaluations, codes and standards, industry projects, and vehicle systems optimization.

  14. Final Report for the Virtual Reliability Realization System LDRD

    Energy Technology Data Exchange (ETDEWEB)

    DELLIN, THEODORE A.; HENDERSON, CHRISTOPHER L.; O' TOOLE, EDWARD J.

    2000-12-01

    Current approaches to reliability are not adequate to keep pace with the need for faster, better and cheaper products and systems. This is especially true in high consequence of failure applications. The original proposal for the LDRD was to look at this challenge and see if there was a new paradigm that could make reliability predictions, along with a quantitative estimate of the risk in that prediction, in a way that was faster, better and cheaper. Such an approach would be based on the underlying science models that are the backbone of reliability predictions. The new paradigm would be implemented in two software tools: the Virtual Reliability Realization System (VRRS) and the Reliability Expert System (REX). The three-year LDRD was funded at a reduced level for the first year ($120K vs. $250K) and not renewed. Because of the reduced funding, we concentrated on the initial development of the expertise system. We developed an interactive semiconductor calculation tool needed for reliability analyses. We also were able to generate a basic functional system using Microsoft Siteserver Commerce Edition and Microsoft Sequel Server. The base system has the capability to store Office documents from multiple authors, and has the ability to track and charge for usage. The full outline of the knowledge model has been incorporated as well as examples of various types of content.

  15. Interpretation of coagulation test results using a web-based reporting system.

    Science.gov (United States)

    Quesada, Andres E; Jabcuga, Christine E; Nguyen, Alex; Wahed, Amer; Nedelcu, Elena; Nguyen, Andy N D

    2014-01-01

    Web-based synoptic reporting has been successfully integrated into diverse fields of pathology, improving efficiency and reducing typographic errors. Coagulation is a challenging field for practicing pathologists and pathologists-in-training alike. To develop a Web-based program that can expedite the generation of a individualized interpretive report for a variety of coagulation tests. We developed a Web-based synoptic reporting system composed of 119 coagulation report templates and 38 thromboelastography (TEG) report templates covering a wide range of findings. Our institution implemented this reporting system in July 2011; it is currently used by pathology residents and attending pathologists. Feedback from the users of these reports have been overwhelmingly positive. Surveys note the time saved and reduced errors. Our easily accessible, user-friendly, Web-based synoptic reporting system for coagulation is a valuable asset to our laboratory services. Copyright© by the American Society for Clinical Pathology (ASCP).

  16. Motor palsies of cranial nerves (excluding VII) after vaccination: reports to the US Vaccine Adverse Event Reporting System.

    Science.gov (United States)

    Woo, Emily Jane; Winiecki, Scott K; Ou, Alan C

    2014-01-01

    We reviewed cranial nerve palsies, other than VII, that have been reported to the US Vaccine Adverse Event Reporting System (VAERS). We examined patterns for differences in vaccine types, seriousness, age, and clinical characteristics. We identified 68 reports of cranial nerve palsies, most commonly involving the oculomotor (III), trochlear (IV), and abducens (VI) nerves. Isolated cranial nerve palsies, as well as palsies occurring as part of a broader clinical entity, were reported. Forty reports (59%) were classified as serious, suggesting that a cranial nerve palsy may sometimes be the harbinger of a broader and more ominous clinical entity, such as a stroke or encephalomyelitis. There was no conspicuous clustering of live vs. inactivated vaccines. The patient age range spanned the spectrum from infants to the elderly. Independent data may help to clarify whether, when, and to what extent the rates of cranial nerve palsies following particular vaccines may exceed background levels.

  17. Architecture Analysis of Evolving Complex Systems of Systems: Technical Presentation [and Executive Status Report

    Science.gov (United States)

    Lindvall, Mikael; Godfrey, Sally; Ackermann, Chris; Ray, Arnab; Yonkwa, Lyly; Ganesan, Dharma; Stratton, William C.; Sibol, Deane E.

    2008-01-01

    Analyze, Visualize, and Evaluate structure and behavior using static and dynamic information, individual systems as well as systems of systems. Next steps: Refine software tool support; Apply to other systems; and Apply earlier in system life cycle.

  18. Report on the Vocational Education and Training System in Hungary. National Observatory Country Report, 1999.

    Science.gov (United States)

    Bocz, Tamas Kopeczi

    An intrinsic part of the transition to a modern market economy in Hungary has been the restructuring of the vocational education and training (VET) system. A positive side effect of the socioeconomic transition is the emergence of human resources development (HRD). The transition process has been successful in the school-based education system,…

  19. Smart Infrared Inspection System Field Operational Test Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Siekmann, Adam [ORNL; Capps, Gary J [ORNL; Franzese, Oscar [ORNL; Lascurain, Mary Beth [ORNL

    2011-06-01

    The Smart InfraRed Inspection System (SIRIS) is a tool designed to assist inspectors in determining which vehicles passing through the SIRIS system are in need of further inspection by measuring the thermal data from the wheel components. As a vehicle enters the system, infrared cameras on the road measure temperatures of the brakes, tires, and wheel bearings on both wheel ends of commercial motor vehicles (CMVs) in motion. This thermal data is then presented to enforcement personal inside of the inspection station on a user friendly interface. Vehicles that are suspected to have a violation are automatically alerted to the enforcement staff. The main goal of the SIRIS field operational test (FOT) was to collect data to evaluate the performance of the prototype system and determine the viability of such a system being used for commercial motor vehicle enforcement. From March 2010 to September 2010, ORNL facilitated the SIRIS FOT at the Greene County Inspection Station (IS) in Greeneville, Tennessee. During the course of the FOT, 413 CMVs were given a North American Standard (NAS) Level-1 inspection. Of those 413 CMVs, 384 were subjected to a SIRIS screening. A total of 36 (9.38%) of the vehicles were flagged by SIRIS as having one or more thermal issues; with brakes issues making up 33 (91.67%) of those. Of the 36 vehicles flagged as having thermal issues, 31 (86.11%) were found to have a violation and 30 (83.33%) of those vehicles were placed out-of-service (OOS). Overall the enforcement personnel who have used SIRIS for screening purposes have had positive feedback on the potential of SIRIS. With improvements in detection algorithms and stability, the system will be beneficial to the CMV enforcement community and increase overall trooper productivity by accurately identifying a higher percentage of CMVs to be placed OOS with minimal error. No future evaluation of SIRIS has been deemed necessary and specifications for a production system will soon be drafted.

  20. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT-INGERSOLL-RAND ENERGY SYSTEMS IR POWERWORKS(TM) 70 KW MICROTURBINE SYSTEM

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the IR PowerWorks 70kW Microturbine System manufactured by Ingersoll-Rand Energy Systems. This system is a 70 kW electrical generator that puts out 480 v AC at 60 Hz and that is driven by...

  1. Autonomous intelligent assembly systems LDRD 105746 final report.

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Robert J.

    2013-04-01

    This report documents a three-year to develop technology that enables mobile robots to perform autonomous assembly tasks in unstructured outdoor environments. This is a multi-tier problem that requires an integration of a large number of different software technologies including: command and control, estimation and localization, distributed communications, object recognition, pose estimation, real-time scanning, and scene interpretation. Although ultimately unsuccessful in achieving a target brick stacking task autonomously, numerous important component technologies were nevertheless developed. Such technologies include: a patent-pending polygon snake algorithm for robust feature tracking, a color grid algorithm for uniquely identification and calibration, a command and control framework for abstracting robot commands, a scanning capability that utilizes a compact robot portable scanner, and more. This report describes this project and these developed technologies.

  2. Energy study of pipeline transportation systems. Executive summary. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Banks, W. F.

    1977-12-31

    The basic objectives of the overall study were to (1) characterize the pipeline industry and understand its energy consumption in each of the five major pipeline-industry segments: gas, oil, slurry, fresh water, and waste water; (2) identify opportunities for energy conservation in the pipeline industry, and to recommend the necessary R, D, and D programs to exploit those opportunities; (3) characterize and understand the influence of the Federal government on introduction of energy conservative innovations into the pipeline industry; and (4) assess the future potential of the pipeline industry for growth and for contribution to the national goal of energy conservation. This project final report is an executive summary presenting the results from the seven task reports.

  3. Green Lighting. Energy-efficient integrated lighting systems - Final report

    Energy Technology Data Exchange (ETDEWEB)

    Linhart, F.; Scartezzini, J.-L.

    2009-10-15

    The objective of the Green Lighting project was to develop a High Performance Integrated Lighting System, based on advanced technologies for day- and electric lighting, achieving a Lighting Power Density (LPD) that does not exceed 3 W/m{sup 2}. The project has revealed that Anidolic Daylighting Systems (ADS) are an ideal basis for High Performance Integrated Lighting Systems. Not only are they able to provide adequate illumination (i.e. sufficiently high illuminance) in office rooms during large fractions of normal office hours, under various sky conditions and over the entire year, but they are also highly appreciated by office occupants at the condition that glare control mechanisms are available. Complementary electric lighting is, however, still necessary to back up the ADS at times when there is insufficient daylight flux available. It was shown during this project, that the most interesting trade-offs between energy-efficiency and visual comfort are obtained by using a combination of ceiling-mounted directly emitting luminaires with very high optical efficiencies for ambient lighting and portable desk lamps for temporary task lighting. The most appropriate lamps for the ceiling-mounted luminaires are currently highly efficient fluorescent tubes, but white LED tubes can be considered a realistic option for the future. The most suitable light sources for desk lamps for temporary task lighting are Compact Fluorescent Lamps (CFLs) and white LED light bulbs. Based on the above-mentioned technologies, a High Performance Integrated Lighting System with a very low LPD has been developed over the last three years. The system has been set up in an office room of the LESO solar experimental building located on the EPFL campus; it has been tested intensively during a Post-Occupancy Evaluation (POE) study involving twenty human subjects. This study has revealed that the subjects' performance and subjective visual comfort was improved by the new system, compared to

  4. Chemical energy system for a borehole seismic source. [Final report

    Energy Technology Data Exchange (ETDEWEB)

    Engelke, R.; Hedges, R.O.

    1996-03-01

    We describe a detonation system that will be useful in the seismological examination of geological structures. The explosive component of this system is produced by the mixing of two liquids; these liquids are classified as non-explosive materials by the Department of Transportation. This detonation system could be employed in a borehole tool in which many explosions are made to occur at various points in the borehole. The explosive for each explosion would be mixed within the tool immediately prior to its being fired. Such an arrangement ensures that no humans are ever in proximity to explosives. Initiation of the explosive mixture is achieved with an electrical slapper detonator whose specific parameters are described; this electrical initiation system does not contain any explosive. The complete electrical/mechanical/explosive system is shown to be able to perform correctly at temperatures {le}120{degrees}C and at depths in a water-filled borehole of {le} 4600 ft (i.e., at pressures of {le}2000 psig).

  5. Technical assessment of maglev system concepts. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lever, J.H.

    1998-10-01

    The Government Maglev System Assessment Team operated from 1991 to 1993 as part of the National Maglev Initiative. They assessed the technical viability of four US Maglev system concepts, using the French TGV high speed train and the German TR07 Maglev system as assessment baselines. Maglev in general offers advantages that include high speed potential, excellent system control, high capacity, low energy consumption, low maintenance, modest land requirements, low operating costs, and ability to meet a variety of transportation missions. Further, the US Maglev concepts could provide superior performance to TR07 for similar cost or similar performance for less cost. They also could achieve both lower trip times and lower energy consumption along typical US routes. These advantages result generally from the use of large gap magnetic suspensions, more powerful linear synchronous motors and tilting vehicles. Innovative concepts for motors, guideways, suspension, and superconducting magnets all contribute to a potential for superior long term performance of US Maglev systems compared with TGV and TR07.

  6. Confinement Vessel Assay System: Design and Implementation Report

    Energy Technology Data Exchange (ETDEWEB)

    Frame, Katherine C. [Los Alamos National Laboratory; Bourne, Mark M. [Los Alamos National Laboratory; Crooks, William J. [Los Alamos National Laboratory; Evans, Louise [Los Alamos National Laboratory; Mayo, Douglas R. [Los Alamos National Laboratory; Gomez, Cipriano D. [Retired CMR-OPS: OPERATIONS; Miko, David K. [Los Alamos National Laboratory; Salazar, William R. [Los Alamos National Laboratory; Stange, Sy [Los Alamos National Laboratory; Vigil, Georgiana M. [Los Alamos National Laboratory

    2012-07-18

    Los Alamos National Laboratory has a number of spherical confinement vessels remaining from tests involving nuclear materials. These vessels have an inner diameter of 6 feet with 1- to 2-inch thick steel walls. The goal of the Confinement Vessel Disposition (CVD) project is to remove debris and reduce contamination inside the vessels. We have developed a neutron assay system for the purposes of Materials Control and Accountability (MC&A) measurements of the vessel prior to and after cleanout. We present our approach to confronting the challenges in designing, building, and testing such a system. The system was designed to meet a set of functional and operational requirements. A Monte Carlo model was developed to aid in optimizing the detector design as well as to predict the systematic uncertainty associated with confinement vessel measurements. Initial testing was performed to optimize and determine various measurement parameters, and then the system was characterized using {sup 252}Cf placed a various locations throughout the measurement system. Measurements were also performed with a {sup 252}Cf source placed inside of small steel and HDPE shells to study the effect of moderation. These measurements compare favorably with their MCNPX model equivalent, making us confident that we can rely on the Monte Carlo simulation to predict the systematic uncertainty due to variations in response to material that may be localized at different points within a vessel.

  7. Systemic brucellosis with chronic meningitis : A case report.

    Directory of Open Access Journals (Sweden)

    Ghosh D

    1999-01-01

    Full Text Available A young adult presenting with 11 months history of fever, headache, vomiting was found to have CSF lymphocytic pleocytosis with increased protein. His serum tested strongly positive for Brucella (standard tube agglutination titre 1: 320 whereas CSF was weakly positive. He became asymptomatic on treatment with tetracycline, rifampicin and streptomycin with significant CSF response. This case is reported because of its rarity.

  8. Occupational Survey Report Satellite, Wideband, and Telemetry Systems

    Science.gov (United States)

    2002-08-01

    the final report. Mr. Tyrone Hill provided computer-programming support, and Ms. Dolores Navarro provided administrative support. Major Jose...security, military lifestyle, medical or dental care for the active duty member, and retirement benefits. The three TAFMS groups were also in agreement...below Table 35 § Job security, medical or dental care for AD member, and military lifestyle appeared for each of the three TAFMS groups as top

  9. FINAL REPORT: Multigrid for Systems and Time-Dependent PDEs

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-08-02

    This report has two sections. The first section is the motivation for looking at differing discretizations on coarse grids for solving a parabolic equation using multigrid in time. The second section contains selected numerical results from the many experiments conducted. The most interesting result is that for explicit fine grid discretizations, the best coarse discretization (i.e. smallest convergence rates) is a weighting between implicit and explicit methods.

  10. Status report - The Canadian Hospitals Injury Reporting and Prevention Program: a dynamic and innovative injury surveillance system.

    Science.gov (United States)

    Crain, J; McFaull, S; Thompson, W; Skinner, R; Do, M T; Fréchette, M; Mukhi, S

    2016-06-01

    This status report on the Canadian Hospitals Injury Reporting and Prevention Program (CHIRPP), an emergency department-based injury and poisoning surveillance system, describes the result of migrating from a centralized data entry and coding process to a decentralized process, the web-based eCHIRPP system, in 2011. This secure system is improving the CHIRPP's overall flexibility and timeliness, which are key attributes of an effective surveillance system. The integrated eCHIRPP platform enables near real-time data entry and access, has user-friendly data management and analysis tools, and allows for easier communication and connectivity across the CHIRPP network through an online collaboration centre. Current pilot testing of automated data monitoring and trend analysis tools-designed to monitor and flag incoming data according to predefined criteria (for example, a new consumer product)-is revealing eCHIRPP's potential for providing early warnings of new hazards, issues and trends.

  11. Status report - The Canadian Hospitals Injury Reporting and Prevention Program: a dynamic and innovative injury surveillance system

    Directory of Open Access Journals (Sweden)

    J. Crain

    2016-06-01

    Full Text Available This status report on the Canadian Hospitals Injury Reporting and Prevention Program (CHIRPP, an emergency department-based injury and poisoning surveillance system, describes the result of migrating from a centralized data entry and coding process to a decentralized process, the web-based eCHIRPP system, in 2011. This secure system is improving the CHIRPP’s overall flexibility and timeliness, which are key attributes of an effective surveillance system. The integrated eCHIRPP platform enables near real-time data entry and access, has user-friendly data management and analysis tools, and allows for easier communication and connectivity across the CHIRPP network through an online collaboration centre. Current pilot testing of automated data monitoring and trend analysis tools—designed to monitor and flag incoming data according to predefined criteria (for example, a new consumer product—is revealing eCHIRPP’s potential for providing early warnings of new hazards, issues and trends.

  12. Brief report: designing life support systems for space habitats

    Science.gov (United States)

    Wieland, P.

    1994-01-01

    Permanent human presence in space beyond low Earth orbit (LEO) is now technically feasible. To achieve this goal several requirements must be met, which can be summarized as: technologies, facilities, organization, vision, and will. This paper describes a recently published NASA Reference Publication, "Designing for Human Presence in Space: An Introduction to Environmental Control and Life Support Systems" that addresses how to achieve the goal of permanent human presence in space, specifically, how to design and develop environmental control and life support systems (ECLSS) for space habitats. This includes the technologies that perform the required functions, the facilities where the systems will be developed, and the organization necessary to perform the numerous tasks efficiently.

  13. Total Energy Recovery System for Agribusiness. [Geothermally heated]. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Fogleman, S.F.; Fisher, L.A.; Black, A.R.; Singh, D.P.

    1977-05-01

    An engineering and economic study was made to determine a practical balance of selected agribusiness subsystems resulting in realistic estimated produce yields for a geothermally heated system known as the Total Energy Recovery System for Agribusiness. The subsystem cycles for an average application at an unspecified hydrothermal resources site in the western United States utilize waste and by-products from their companion cycles insofar as practicable. Based on conservative estimates of current controlled environment yields, produce wholesale market prices, production costs, and capital investment required, it appears that the family-operation-sized TERSA module presents the potential for marginal recovery of all capital investment costs. In addition to family- or small-cooperative-farming groups, TERSA has potential users in food-oriented corporations and large-cooperative-agribusiness operations. The following topics are considered in detail: greenhouse tomatoes and cucumbers; fish farming; mushroom culture; biogas generation; integration methodology; hydrothermal fluids and heat exchanger selection; and the system. 133 references. (MHR)

  14. Report: integrated industrial waste management systems in China.

    Science.gov (United States)

    Zhang, Wenxin; Roberts, Peter

    2007-06-01

    Various models of urban sustainable development have been introduced in recent years and some of these such as integrated waste management have been proved to be of particular value. Integrated industrial waste management systems include all the administrative, financial, legal, planning and engineering functions involved in solutions to the problems of industrial waste. Even though the pace of the improvement made to China's industrial waste management capacity is impressive, China has been unable to keep up with the increasing demand for waste management. This paper will evaluate the application of integrated industrial waste management systems in promoting urban sustainable development in the context of three case study cities in China (positive case, average case and negative case) by identifying and accessing the factors that affect the success or failure of integrated industrial waste management systems.

  15. Microcomputer Based School Information Management Systems (SIMS) in Alberta Junior and Senior High Schools. Final Report.

    Science.gov (United States)

    Wright, P.; Valbonesi, P.

    This report comprises a detailed evaluation of three IBM microcomputer-based school information management systems: Student Information and Records System (SIRS) by Management Information Group, The School System (TSS) by Columbia Computing Services, and Computer Educational Management Accounting System (CEMAS) by Computerlib. These three systems…

  16. Applying a Qualitative Modeling Shell to Process Diagnosis: The Caster System. ONR Technical Report #16.

    Science.gov (United States)

    Thompson, Timothy F.; Clancey, William J.

    This report describes the application of a shell expert system from the medical diagnostic system, Neomycin, to Caster, a diagnostic system for malfunctions in industrial sandcasting. This system was developed to test the hypothesis that starting with a well-developed classification procedure and a relational language for stating the…

  17. Role of passive remote sensors. Sensor System Panel report

    Science.gov (United States)

    1982-01-01

    Capabilities of present passive systems are described and the development of passive remote sensing systems for the more abundant tropospheric trace species is recommended. The combination of nadir-viewing spectrometers and solar occultation for tropospheric measurement of those gases having large stratospheric burdens is discussed. Development of a nadir-viewing instrument capable of obtaining continuous spectra in narrower bands is recommended. Gas filter radiometers for species specific measurements and development of a spectral survey instrument are discussed. Further development of aerosol retrieval algorithms, including polarization techniques, for obtaining aerosol thickness and size distributions is advised. Recommendations of specific investigations to be pursued are presented.

  18. ADVANCED TURBINE SYSTEM CONCEPTUAL DESIGN AND PRODUCT DEVELOPMENT - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Albrecht H. Mayer

    2000-07-15

    Asea Brown Boveri (ABB) has completed its technology based program. The results developed under Work Breakdown Structure (WBS) 8, concentrated on technology development and demonstration have been partially implemented in newer turbine designs. A significant improvement in heat rate and power output has been demonstrated. ABB will use the knowledge gained to further improve the efficiency of its Advanced Cycle System, which has been developed and introduced into the marked out side ABB's Advanced Turbine System (ATS) activities. The technology will lead to a power plant design that meets the ATS performance goals of over 60% plant efficiency, decreased electricity costs to consumers and lowest emissions.

  19. Surface moisture measurement system hardware acceptance test report

    Energy Technology Data Exchange (ETDEWEB)

    Ritter, G.A., Westinghouse Hanford

    1996-05-28

    This document summarizes the results of the hardware acceptance test for the Surface Moisture Measurement System (SMMS). This test verified that the mechanical and electrical features of the SMMS functioned as designed and that the unit is ready for field service. The bulk of hardware testing was performed at the 306E Facility in the 300 Area and the Fuels and Materials Examination Facility in the 400 Area. The SMMS was developed primarily in support of Tank Waste Remediation System (TWRS) Safety Programs for moisture measurement in organic and ferrocyanide watch list tanks.

  20. Plant systems/components modularization study. Final report. [PWR

    Energy Technology Data Exchange (ETDEWEB)

    1977-07-01

    The final results are summarized of a Plant Systems/Components Modularization Study based on Stone and Webster's Pressurized Water Reactor Reference Design. The program has been modified to include evaluation of the most promising areas for modular consideration based on the level of the Sundesert Project engineering design completion and the feasibility of their incorporation into the plant construction effort.

  1. Design of Training Systems Phase I Summary Report.

    Science.gov (United States)

    Lindahl, William H.; And Others

    A summary is provided of the status of Phase I of the three-stage project, "Design of Training Systems" (DOTS). The purpose of the overall project is described as being to introduce the technologies of education, psychology, management and operations research into the management of Navy training. Phase I of the effort is designed to…

  2. Solar heating system installed at Stamford, CT. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    Information is provided on the solar heating system installed at the Lutz-Sotire Partnership Executive East Office Building, Stamford, Connecticut. The information consists of description of system and components, operation and maintenance manual, as-built drawings and manufacturer's component data. The solar system was designed to provide approximately 50 percent of the heating requirements. The solar facility has 2,561 sq. ft. of liquid flat plate collectors and a 6000 gallon, stone lined, well-insulated storage tank. Freeze protection is provided by a 50 percent glycol/water mixture in the collector loop. From the storage tank, solar heated water is fed into the building's distributed heat pump loop via a modulating three-way valve. If the storage tank temperature drops below 80/sup 0/F, the building loop may be supplied from the existing electrical hot water boilers. The Executive East Office Building is of moderate size, 25,000 sq. ft. of heated space in 2 1/2 stories. The solar system makes available for other users up to 150 KVA of existing electrical generating capacity.

  3. Strategic Explanations for a Diagnostic Consultation System. Technical Report #8.

    Science.gov (United States)

    Hasling, Diane Warner; And Others

    This paper examines the problem of automatic explanation of reasoning, or the ability of a program to discuss what it is doing in some understandable way, particularly as part of an expert system. An introduction presents a general framework in which to view explanation and reviews some of the research in this area. This is followed by a…

  4. Performance of the Defense Acquisition System, 2016 Annual Report

    Science.gov (United States)

    2016-10-24

    3 Contractual Spending by Product Service Code Portfolios ...were seen—but not everywhere. Outliers required further analysis given their distorting effects on the portfolio in certain metrics and on the...comparison) so that the effects solely from the acquisition system are revealed. Listen to feedback from the DoD’s professional acquisition leadership

  5. On-Orbit Asset Management System, September 1995. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-10

    Declining budgets have prompted the need to decrease launch cost, increase satellite lifetime, and accomplish more with each satellite. This study evaluates an OOAMS system for its ability to lengthen lifetime of on-orbit assets, decrease the number of satellites required to perform a mission, increase responsiveness, and provide increased mission capability/tactical advantage. Lifetime analysis suggest that the larger satellite systems (NASA and military communication systems, surveillance satellites and earth observing satellites) would benefit most from a nuclear bimodal OOAMS. Evaluation of satellite constellations indicate that a modest reduction in the number of satellites could be realized using OOAMS if the thermal restart capability was at least ten. An OOAMS could improve the responsiveness (launching of new assets) using on-orbit reconstitution of assets. A top level utility assessment was done to address system cost issues relating to funding profiles, first unit cost, and break-even analysis. From mission capture and orbital lifetime criteria, the recommended minimum orbital altitude is 900 km. The on-orbit thermal restart capability should be increased from five to ten. Analysis of total impulse vs propellant consumed for selected missions suggests that total impulse be increased from 40 million to 48 million Newton-seconds.

  6. Committee Report: Metrics & Methods for MF/UF System Optimization

    Science.gov (United States)

    After a membrane filtration (i.e., microfiltration (MF) and ultrafiltration (UF)) system is designed, installed, and commissioned, it is essential that the plant is well-maintained in order to proactively identify potential design or equipment problems and ensure its proper opera...

  7. Heat-pump-centered integrated community energy systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-01

    A Heat Pump Centered-Integrated Community Energy System (HP-ICES) concept was explored and developed that is based on use of privately owned ice-making heat pumps in each building or complex within a community. These heat pumps will provide all of the space heating, space cooling and domestic hot water needs. All of the community input energy required is provided by electrical power, thereby eliminating a community's dependence on gas or oil supplies. The heat pumps will operate in both air and water source modes, deriving performance advantages of both. The possible forms of an HP-ICES system, the technical and economic limitations, environmental impacts and other factors are discussed from a general viewpoint. The concept is applied to a specific planned community and its performance and economic features are examined in detail. It is concluded that the HP-ICES concept is technically viable, but that its economic desirability as compared with conventional heat pump systems is hampered by much higher initial costs, and that the economic feasibility of HP-ICES systems will depend on future fuel source costs and supply and on electric power rates. (LCL)

  8. Review and Analysis of GAO Reports on Major Weapon Systems

    Science.gov (United States)

    2012-10-24

    that controls the health and status of the space vehicle was found to be inadequate when it unexpectedly failed during testing in 2007. In April...Outsourcing the Pearl Harbor MK-48 Intermediate Maintenance Activity  Pallet Management System  PBL (4)  Privatization-NOSL/NAWCI  RFID (6)  Risk

  9. The Fact Book: Report for the Florida College System, 2015

    Science.gov (United States)

    Florida Department of Education, 2015

    2015-01-01

    This 2015 fact book for the Florida College System is divided into the following categories: (1) Student Information, which includes fall, annual, FTE, and program enrollment statistics, as well as credit program completion statistics; (2) Employee Information, which includes statistics regarding employee headcount by occupational activity, and…

  10. The Fact Book: Report for the Florida College System, 2014

    Science.gov (United States)

    Florida Department of Education, 2014

    2014-01-01

    This 2014 fact book for the Florida College System is divided into the following categories: (1) Student Information, which includes fall, annual, FTE, and program enrollment statistics, as well as credit program completion statistics; (2) Employee Information, which includes statistics regarding employee headcount by occupational activity, and…

  11. Systemic lupus erythematosus: 2 case reports from Eritrea

    African Journals Online (AJOL)

    and cells are damaged by pathogenic antibodies ... reproductive age and characterized by the presence of antibodies in the serum against the nuclear components. (ANA) ... Case B. Systemic Lupus Erythematosis and Vasculitis. A 23 year young lady admitted to the Sembel .... to be associated with drug- induced lupus.

  12. Phosphorimager and PD densitometer imaging system network. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    This document discusses the research projects undertaken as a result of the availability of the PhosphorImager and PD Densitometer Imaging System Network, at the University of Georgia`s Complex Carbohydrate Research Center. The benefit gained from the equipment is described for each project.

  13. A status report on the SLD data acquisition system

    Energy Technology Data Exchange (ETDEWEB)

    1988-11-01

    The basic design of the SLD data acquisition system and its present status are reviewed. Aspects of the design that take particular advantage of the relatively low e/sup +/e/sup /minus// cross section and the low beam crossing rate of a linear collider are explained. 14 refs., 8 figs.

  14. The Battle Command Sustainment Support System: Initial Analysis Report

    Science.gov (United States)

    2016-09-01

    data.  Replica of Joint- Automatic Identification technology (J-AIT) database is stored on the NEDP Oracle database.  Materialized view of the...computing environment (CPCE) Command post client Battle command sustainment support System (BCS3) Logistics ...Overview 1 Effort Summary 1 Potential Roadblocks 2 National Enterprise Data Portal Analysis 2 Feed Dependencies 3 Data Feeds 3 Logistics

  15. Scaling, Linking, and Reporting in a Periodic Assessment System

    Science.gov (United States)

    Mislevy, Robert J.; Zwick, Rebecca

    2012-01-01

    A new entry in the testing lexicon is through-course summative assessment, a system consisting of components administered periodically during the academic year. As defined in the Race to the Top program, these assessments are intended to yield a yearly summative score for accountability purposes. They must provide for both individual and group…

  16. BIOCONAID System (Bionic Control of Acceleration Induced Dimming). Final Report.

    Science.gov (United States)

    Rogers, Dana B.; And Others

    The system described represents a new technique for enhancing the fidelity of flight simulators during high acceleration maneuvers. This technique forces the simulator pilot into active participation and energy expenditure similar to the aircraft pilot undergoing actual accelerations. The Bionic Control of Acceleration Induced Dimming (BIOCONAID)…

  17. Comprehensive Final Report for the Marine Seismic System Program

    Science.gov (United States)

    1985-08-01

    for handling larger pipe. The MSS program deployment operations indicated a need for drill string heave compensation for operations at the...greatest water depths. Some type of heave com- pensation is definitely required when weather conditions are severe. Active or passive heave compensation systems

  18. Mission analysis of photovoltaic solar energy systems. Final report. Volume II. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    1975-12-01

    Appendices include (1) demand forecasting methodologies, (2) system simulation model, (3) preliminary investigation of residential use of dc power, (4) power plant economic model, and (5) projections of unit fuel prices to the year 2000. (WHK)

  19. Development of an AC Module System: Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Suparna Kadam; Miles Russell

    2012-06-15

    The GreenRay Inc. program focused on simplifying solar electricity and making it affordable and accessible to the mainstream population. This was accomplished by integrating a solar module, micro-inverter, mounting and monitoring into a reliable, 'plug and play' AC system for residential rooftops, offering the following advantages: (1) Reduced Cost: Reduction in installation labor with fewer components, faster mounting, faster wiring. (2) Maximized Energy Production: Each AC Module operates at its maximum, reducing overall losses from shading, mismatch, or module downtime. (3) Increased Safety. Electrical and fire safety experts agree that AC Modules have significant benefits, with no energized wiring or live connections during installation, maintenance or emergency conditions. (4) Simplified PV for a Broader Group of Installers. Dramatic simplification of design and installation of a solar power system, enabling faster and more efficient delivery of the product into the market through well-established, mainstream channels. This makes solar more accessible to the public. (5) Broadened the Rooftop Market: AC Modules enable solar for many homes that have shading, split roofs, or obstructions. In addition, due to the smaller building block size of 200W vs. 1000W, homeowners with budget limitations can start small and add to their systems over time. Through this DOE program GreenRay developed the all-in-one AC Module system with an integrated PV Module and microinverter, custom residential mounting and performance monitoring. Development efforts took the product from its initial concept, through prototypes, to a commercial product sold and deployed in the residential market. This pilot deployment has demonstrated the technical effectiveness of the AC Module system in meeting the needs and solving the problems of the residential market. While more expensive than the traditional central inverter systems at the pilot scale, the economics of AC Modules become

  20. Development of an AC Module System: Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Suparna Kadam; Miles Russell

    2012-06-15

    The GreenRay Inc. program focused on simplifying solar electricity and making it affordable and accessible to the mainstream population. This was accomplished by integrating a solar module, micro-inverter, mounting and monitoring into a reliable, 'plug and play' AC system for residential rooftops, offering the following advantages: (1) Reduced Cost: Reduction in installation labor with fewer components, faster mounting, faster wiring. (2) Maximized Energy Production: Each AC Module operates at its maximum, reducing overall losses from shading, mismatch, or module downtime. (3) Increased Safety. Electrical and fire safety experts agree that AC Modules have significant benefits, with no energized wiring or live connections during installation, maintenance or emergency conditions. (4) Simplified PV for a Broader Group of Installers. Dramatic simplification of design and installation of a solar power system, enabling faster and more efficient delivery of the product into the market through well-established, mainstream channels. This makes solar more accessible to the public. (5) Broadened the Rooftop Market: AC Modules enable solar for many homes that have shading, split roofs, or obstructions. In addition, due to the smaller building block size of 200W vs. 1000W, homeowners with budget limitations can start small and add to their systems over time. Through this DOE program GreenRay developed the all-in-one AC Module system with an integrated PV Module and microinverter, custom residential mounting and performance monitoring. Development efforts took the product from its initial concept, through prototypes, to a commercial product sold and deployed in the residential market. This pilot deployment has demonstrated the technical effectiveness of the AC Module system in meeting the needs and solving the problems of the residential market. While more expensive than the traditional central inverter systems at the pilot scale, the economics of AC Modules become