WorldWideScience

Sample records for multiple ctcf-binding elements

  1. Targeted deletion of multiple CTCF-binding elements in the human C-MYC gene reveals a requirement for CTCF in C-MYC expression.

    Directory of Open Access Journals (Sweden)

    Wendy M Gombert

    Full Text Available BACKGROUND: Insulators and domain boundaries both shield genes from adjacent enhancers and inhibit intrusion of heterochromatin into transgenes. Previous studies examined the functional mechanism of the MYC insulator element MINE and its CTCF binding sites in the context of transgenes that were randomly inserted into the genome by transfection. However, the contribution of CTCF binding sites to both gene regulation and maintenance of chromatin has not been tested at the endogenous MYC gene. METHODOLOGY/PRINCIPAL FINDINGS: To determine the impact of CTCF binding on MYC expression, a series of mutant human chromosomal alleles was prepared in homologous recombination-efficient DT40 cells and individually transferred by microcell fusion into murine cells. Functional tests reported here reveal that deletion of CTCF binding elements within the MINE does not impact the capacity of this locus to correctly organize an 'accessible' open chromatin domain, suggesting that these sites are not essential for the formation of a competent, transcriptionally active locus. Moreover, deletion of the CTCF site at the MYC P2 promoter reduces transcription but does not affect promoter acetylation or serum-inducible transcription. Importantly, removal of either CTCF site leads to DNA methylation of flanking sequences, thereby contributing to progressive loss of transcriptional activity. CONCLUSIONS: These findings collectively demonstrate that CTCF-binding at the human MYC locus does not repress transcriptional activity but is required for protection from DNA methylation.

  2. An Ectopic CTCF Binding Element Inhibits Tcrd Rearrangement by Limiting Contact between Vδ and Dδ Gene Segments.

    Science.gov (United States)

    Chen, Liang; Zhao, Lijuan; Alt, Frederick W; Krangel, Michael S

    2016-10-15

    Chromatin looping mediated by the CCCTC binding factor (CTCF) regulates V(D)J recombination at Ag receptor loci. CTCF-mediated looping can influence recombination signal sequence (RSS) accessibility by regulating enhancer activation of germline promoters. CTCF-mediated looping has also been shown to limit directional tracking of the RAG recombinase along chromatin, and to regulate long-distance interactions between RSSs, independent of the RAG recombinase. However, in all prior instances in which CTCF-mediated looping was shown to influence V(D)J recombination, it was not possible to fully resolve the relative contributions to the V(D)J recombination phenotype of changes in accessibility, RAG tracking, and RAG-independent long-distance interactions. In this study, to assess mechanisms by which CTCF-mediated looping can impact V(D)J recombination, we introduced an ectopic CTCF binding element (CBE) immediately downstream of Eδ in the murine Tcra-Tcrd locus. The ectopic CBE impaired inversional rearrangement of Trdv5 in the absence of measurable effects on Trdv5 transcription and chromatin accessibility. The ectopic CBE also limited directional RAG tracking from the Tcrd recombination center, demonstrating that a single CBE can impact the distribution of RAG proteins along chromatin. However, such tracking cannot account for Trdv5-to-Trdd2 inversional rearrangement. Rather, the defect in Trdv5 rearrangement could only be attributed to a reconfigured chromatin loop organization that limited RAG-independent contacts between the Trdv5 and Trdd2 RSSs. We conclude that CTCF can regulate V(D)J recombination by segregating RSSs into distinct loop domains and inhibiting RSS synapsis, independent of any effects on transcription, RSS accessibility, and RAG tracking. Copyright © 2016 by The American Association of Immunologists, Inc.

  3. CTCF Binding Polarity Determines Chromatin Looping

    NARCIS (Netherlands)

    de Wit, Elzo; Vos, Erica S M; Holwerda, Sjoerd J B|info:eu-repo/dai/nl/344682218; Valdes-Quezada, Christian; Verstegen, Marjon J A M; Teunissen, Hans; Splinter, Erik; Wijchers, Patrick J; Krijger, Peter H L; de Laat, Wouter|info:eu-repo/dai/nl/169934497

    2015-01-01

    CCCTC-binding factor (CTCF) is an architectural protein involved in the three-dimensional (3D) organization of chromatin. In this study, we assayed the 3D genomic contact profiles of a large number of CTCF binding sites with high-resolution 4C-seq. As recently reported, our data also suggest that ch

  4. The role of CTCF binding sites in the 3' immunoglobulin heavy chain regulatory region.

    Science.gov (United States)

    Birshtein, Barbara K

    2012-01-01

    The immunoglobulin heavy chain locus undergoes a series of DNA rearrangements and modifications to achieve the construction and expression of individual antibody heavy chain genes in B cells. These events affect variable regions, through VDJ joining and subsequent somatic hypermutation, and constant regions through class switch recombination (CSR). Levels of IgH expression are also regulated during B cell development, resulting in high levels of secreted antibodies from fully differentiated plasma cells. Regulation of these events has been attributed primarily to two cis-elements that work from long distances on their target sequences, i.e., an ∼1 kb intronic enhancer, Eμ, located between the V region segments and the most 5' constant region gene, Cμ; and an ∼40 kb 3' regulatory region (3' RR) that is located downstream of the most 3' C(H) gene, Cα. The 3' RR is a candidate for an "end" of B cell-specific regulation of the Igh locus. The 3' RR contains several B cell-specific enhancers associated with DNase I hypersensitive sites (hs1-4), which are essential for CSR and for high levels of IgH expression in plasma cells. Downstream of this enhancer-containing region is a region of high-density CTCF binding sites, which extends through hs5, 6, and 7 and further downstream. CTCF, with its enhancer-blocking activities, has been associated with all mammalian insulators and implicated in multiple chromosomal interactions. Here we address the 3' RR CTCF-binding region as a potential insulator of the Igh locus, an independent regulatory element and a predicted modulator of the activity of 3' RR enhancers. Using chromosome conformation capture technology, chromatin immunoprecipitation, and genetic approaches, we have found that the 3' RR with its CTCF-binding region interacts with target sequences in the V(H), Eμ, and C(H) regions through DNA looping as regulated by protein binding. This region impacts on B cell-specific Igh processes at different stages of B cell

  5. The role of CTCF binding sites in the 3’ immunoglobulin heavy chain regulatory region

    Directory of Open Access Journals (Sweden)

    Barbara K Birshtein

    2012-11-01

    Full Text Available The immunoglobulin heavy chain locus undergoes a series of DNA rearrangements and modifications to achieve the construction and expression of individual antibody heavy chain genes in B cells. These events affect variable regions, through VDJ joining and subsequent somatic hypermutation, and constant regions through class switch recombination. Levels of IgH expression are also regulated during B cell development, resulting in high levels of secreted antibodies from fully-differentiated plasma cells. Regulation of these events has been attributed primarily to two cis-elements that work from long distances on their target sequences, i.e., an ~1 kb intronic enhancer, Eμ, located between the V region segments and the most 5′ constant region gene, Cμ; and an ~40 kb 3′ regulatory region (3′ RR that is located downstream of the most 3′ CH gene, Cα. The 3′ RR is a candidate for an end of B cell-specific regulation of the Igh locus. The 3′ RR contains several B cell-specific enhancers associated with DNase I hypersensitive sites (hs1-4, which are essential for class switch recombination and for high levels of IgH expression in plasma cells. Downstream of this enhancer-containing region is a region of high-density CTCF binding sites, which extends through hs5, 6, and 7 and further downstream. CTCF, with its enhancer-blocking activities, has been associated with all mammalian insulators and implicated in multiple chromosomal interactions. Here we address the 3′ RR CTCF-binding region as a potential insulator of the Igh locus, an independent regulatory element and a predicted modulator of the activity of 3’ RR enhancers. Using chromosome conformation capture technology, chromatin immunoprecipitation and genetic approaches, we have found that the 3’ RR with its CTCF binding region interacts with target sequences in the VH, Eμ and CH regions through DNA looping as regulated by protein binding. This region impacts on B cell-specific Igh

  6. Epigenetic silencing of the XAF1 gene is mediated by the loss of CTCF binding

    Science.gov (United States)

    Victoria-Acosta, Georgina; Vazquez-Santillan, Karla; Jimenez-Hernandez, Luis; Muñoz-Galindo, Laura; Maldonado, Vilma; Martinez-Ruiz, Gustavo Ulises; Melendez-Zajgla, Jorge

    2015-01-01

    XAF1 is a tumour suppressor gene that compromises cell viability by modulating different cellular events such as mitosis, cell cycle progression and apoptosis. In cancer, the XAF1 gene is commonly silenced by CpG-dinucleotide hypermethylation of its promoter. DNA demethylating agents induce transcriptional reactivation of XAF1, sensitizing cancer cells to therapy. The molecular mechanisms that mediate promoter CpG methylation have not been previously studied. Here, we demonstrate that CTCF interacts with the XAF1 promoter in vivo in a methylation-sensitive manner. By transgene assays, we demonstrate that CTCF mediates the open-chromatin configuration of the XAF1 promoter, inhibiting both CpG-dinucleotide methylation and repressive histone posttranslational modifications. In addition, the absence of CTCF in the XAF1 promoter inhibits transcriptional activation induced by well-known apoptosis activators. We report for the first time that epigenetic silencing of the XAF1 gene is a consequence of the loss of CTCF binding. PMID:26443201

  7. DNA methylation in the CTCF-binding site I and the expression pattern of the H19 gene

    DEFF Research Database (Denmark)

    Esteves, Leda I C V; Javaroni, Afonso C; Nishimoto, Inês N

    2005-01-01

    Loss of allele-specific expression by the imprinted genes IGF2 and H19 has been correlated with a differentially methylated region (DMR) upstream to the H19 gene. The H19-DMR contains seven potential CCCTC-binding factor (CTCF) binding sites. CTCF is a chromatin insulator and a multifunctional...... of imprinting. We detected a significant correlation (P = 0.041, Fisher's exact test) between H19 expression and tumor recurrence. Among H19 positive cases, six were T2, in which five developed recurrence and/or metastasis. Inversely, in the group of tumors that showed no H19 gene expression, 5 out of 24 were T...

  8. H19-DMR allele-specific methylation analysis reveals epigenetic heterogeneity of CTCF binding site 6 but not of site 5 in head-and-neck carcinomas

    DEFF Research Database (Denmark)

    De Castro Valente Esteves, Leda Isabel; De Karla Cervigne, Nilva; Do Carmo Javaroni, Afonso

    2006-01-01

    Aberrant methylation of seven potential binding sites of the CTCF factor in the differentially methylated region upstream of the H19 gene (H19-DMR) has been suggested as critical for the regulation of IGF2 and H19 imprinted genes. In this study, we analyzed the allele-specific methylation pattern...... of CTCF binding sites 5 and 6 using methylation-sensitive restriction enzyme PCR followed by RFLP analysis in matched tumoral and lymphocyte DNA from head-and-neck squamous cell carcinoma (HNSCC) patients, as well as in lymphocyte DNA from control individuals who were cancer-free. The monoallelic...... methylation pattern was maintained in CTCF binding site 5 in 22 heterozygous out of 91 samples analyzed. Nevertheless, a biallelic methylation pattern was detected in CTCF binding site 6 in a subgroup of HNSCC patients as a somatic acquired feature of tumor cells. An atypical biallelic methylation was also...

  9. Differential methylation status of IGF2-H19 locus does not affect the fertility of crossbred bulls but some of the CTCF binding sites could be potentially important.

    Science.gov (United States)

    Jena, Subas C; Kumar, Sandeep; Rajput, Sandeep; Roy, Bhaskar; Verma, Arpana; Kumaresan, Arumugam; Mohanty, Tushar K; De, Sachinandan; Kumar, Rakesh; Datta, Tirtha K

    2014-04-01

    Associations between abnormal methylation of spermatozoan DNA with male infertility have been sought in recent years to identify a molecular explanation of differential spermatozoan function. The present work was undertaken to investigate the methylation profile of differentially methylated regions (DMRs) in the IGF2-H19 locus of Bos taurus X Bos indicus crossbred bull spermatozoa. Bulls having more than at least 100 insemination records over a period of 12 years were classified into two groups of five bulls each belonging to low- and high-fertility groups. The IGF2 and H19 DMR sequences in B. indicus cattle were observed to be in absolute homology with B. taurus cattle. The DNA of crossbred bull spermatozoa was isolated, bisulfite treated, and amplified for specific DMR regions using methylation-change-specific primers. The overall degree of methylation at IGF2-H19 DMRs was not found to be significantly different among two groups of bulls. The sixth CTCF binding site (CCCTC) identified in H19 DMR, however, had a significant methylation difference between the high- and low-fertility bulls. It was concluded that alteration of the methylation levels at IGF2-H19 DMRs might not be responsible for the fertility difference of crossbred bulls, although the role played by the specific CTCF binding sites at this locus, which could influence IGF2 expression during spermatogenesis and early embryonic development, deserves further attention.

  10. Genome-wide DNA methylation reprogramming in response to inorganic arsenic links inhibition of CTCF binding, DNMT expression and cellular transformation

    Science.gov (United States)

    Rea, Matthew; Eckstein, Meredith; Eleazer, Rebekah; Smith, Caroline; Fondufe-Mittendorf, Yvonne N.

    2017-02-01

    Chronic low dose inorganic arsenic (iAs) exposure leads to changes in gene expression and epithelial-to-mesenchymal transformation. During this transformation, cells adopt a fibroblast-like phenotype accompanied by profound gene expression changes. While many mechanisms have been implicated in this transformation, studies that focus on the role of epigenetic alterations in this process are just emerging. DNA methylation controls gene expression in physiologic and pathologic states. Several studies show alterations in DNA methylation patterns in iAs-mediated pathogenesis, but these studies focused on single genes. We present a comprehensive genome-wide DNA methylation analysis using methyl-sequencing to measure changes between normal and iAs-transformed cells. Additionally, these differential methylation changes correlated positively with changes in gene expression and alternative splicing. Interestingly, most of these differentially methylated genes function in cell adhesion and communication pathways. To gain insight into how genomic DNA methylation patterns are regulated during iAs-mediated carcinogenesis, we show that iAs probably targets CTCF binding at the promoter of DNA methyltransferases, regulating their expression. These findings reveal how CTCF binding regulates DNA methyltransferase to reprogram the methylome in response to an environmental toxin.

  11. Genome-wide DNA methylation reprogramming in response to inorganic arsenic links inhibition of CTCF binding, DNMT expression and cellular transformation

    Science.gov (United States)

    Rea, Matthew; Eckstein, Meredith; Eleazer, Rebekah; Smith, Caroline; Fondufe-Mittendorf , Yvonne N.

    2017-01-01

    Chronic low dose inorganic arsenic (iAs) exposure leads to changes in gene expression and epithelial-to-mesenchymal transformation. During this transformation, cells adopt a fibroblast-like phenotype accompanied by profound gene expression changes. While many mechanisms have been implicated in this transformation, studies that focus on the role of epigenetic alterations in this process are just emerging. DNA methylation controls gene expression in physiologic and pathologic states. Several studies show alterations in DNA methylation patterns in iAs-mediated pathogenesis, but these studies focused on single genes. We present a comprehensive genome-wide DNA methylation analysis using methyl-sequencing to measure changes between normal and iAs-transformed cells. Additionally, these differential methylation changes correlated positively with changes in gene expression and alternative splicing. Interestingly, most of these differentially methylated genes function in cell adhesion and communication pathways. To gain insight into how genomic DNA methylation patterns are regulated during iAs-mediated carcinogenesis, we show that iAs probably targets CTCF binding at the promoter of DNA methyltransferases, regulating their expression. These findings reveal how CTCF binding regulates DNA methyltransferase to reprogram the methylome in response to an environmental toxin. PMID:28150704

  12. Analysis of neonatal brain lacking ATRX or MeCP2 reveals changes in nucleosome density, CTCF binding and chromatin looping.

    Science.gov (United States)

    Kernohan, Kristin D; Vernimmen, Douglas; Gloor, Gregory B; Bérubé, Nathalie G

    2014-07-01

    ATRX and MeCP2 belong to an expanding group of chromatin-associated proteins implicated in human neurodevelopmental disorders, although their gene-regulatory activities are not fully resolved. Loss of ATRX prevents full repression of an imprinted gene network in the postnatal brain and in this study we address the mechanistic aspects of this regulation. We show that ATRX binds many imprinted domains individually but that transient co-localization between imprinted domains in the nuclei of neurons does not require ATRX. We demonstrate that MeCP2 is required for ATRX recruitment and that deficiency of either ATRX or MeCP2 causes decreased frequency of long-range chromatin interactions associated with altered nucleosome density at CTCF-binding sites and reduced CTCF occupancy. These findings indicate that MeCP2 and ATRX regulate gene expression at a subset of imprinted domains by maintaining a nucleosome configuration conducive to CTCF binding and to the maintenance of higher order chromatin structure.

  13. Epigenetic repression of RARRES1 is mediated by methylation of a proximal promoter and a loss of CTCF binding.

    Directory of Open Access Journals (Sweden)

    Zhengang Peng

    Full Text Available BACKGROUND: The cis-acting promoter element responsible for epigenetic silencing of retinoic acid receptor responder 1 (RARRES1 by methylation is unclear. Likewise, how aberrant methylation interplays effectors and thus affects breast neoplastic features remains largely unknown. METHODOLOGY/PRINCIPAL FINDINGS: We first compared methylation occurring at the sequences (-664~+420 flanking the RARRES1 promoter in primary breast carcinomas to that in adjacent benign tissues. Surprisingly, tumor cores displayed significantly elevated methylation occurring solely at the upstream region (-664~-86, while the downstream element (-85~+420 proximal to the transcriptional start site (+1 remained largely unchanged. Yet, hypermethylation at the former did not result in appreciable silencing effect. In contrast, the proximal sequence displayed full promoter activity and methylation of which remarkably silenced RARRES1 transcription. This phenomenon was recapitulated in breast cancer cell lines, in which methylation at the proximal region strikingly coincided with downregulation. We also discovered that CTCF occupancy was enriched at the unmethylayed promoter bound with transcription-active histone markings. Furthermore, knocking-down CTCF expression hampered RARRES1 expression, suggesting CTCF positively regulated RARRES1 transcription presumably by binding to unmethylated promoter poised at transcription-ready state. Moreover, RARRES1 restoration not only impeded cell invasion but also promoted death induced by chemotherapeutic agents, denoting its tumor suppressive effect. Its role of attenuating invasion agreed with data generated from clinical specimens revealing that RARRES1 was generally downregulated in metastatic lymph nodes compared to the tumor cores. CONCLUSION/SIGNIFICANCE: This report delineated silencing of RARRES1 by hypermethylation is occurring at a proximal promoter element and is associated with a loss of binding to CTCF, an activator for

  14. Duration judgements over multiple elements

    Directory of Open Access Journals (Sweden)

    Inci eAyhan

    2012-11-01

    Full Text Available We investigated the limits of the number of events observers can simultaneously time. For single targets occurring in one of eight positions sensitivity to duration was improved for spatially pre-cued items as compared to post-cued items indicating that exogenous driven attention can improve duration discrimination. Sensitivity to duration for pre-cued items was also marginally better for single items as compared to eight items indicating that even after the allocation of focal attention, distracter items can interfere with the encoding of duration. For an eight item array discrimination was worse for post-cued locations as compared to pre-cued locations indicating both that attention can improve duration discrimination performance and that it was not possible to access a perfect memory trace of the duration of eight elements. The interference from the distracters in the pre-cued eight item array may reflect some mandatory averaging of target and distracter events. To further explore duration averaging we asked subjects to explicitly compare average durations of multiple item arrays against a single item standard duration. Duration discrimination thresholds were significantly lower for single elements as compared to multiple elements, showing that averaging, either automatically or intentionally, impairs duration discrimination. There was no set size effect. Performance was the same for averages of two and eight items, but performance with even an average of two items was worse than for one item. This was also true for sequential presentation indicating poor performance was not due to limits on the division of attention across items. Rather performance appears to be limited by an inability to remember or aggregate duration information from two or more items. Although it is possible to manipulate perceived duration locally, there appears to be no perceptual mechanisms for aggregating local durations across space.

  15. Repetitive element hypermethylation in multiple sclerosis patients.

    Science.gov (United States)

    Neven, K Y; Piola, M; Angelici, L; Cortini, F; Fenoglio, C; Galimberti, D; Pesatori, A C; Scarpini, E; Bollati, V

    2016-06-18

    Multiple sclerosis (MS) is a complex disorder of the central nervous system whose cause is currently unknown. Evidence is increasing that DNA methylation alterations could be involved in inflammatory and neurodegenerative diseases and could contribute to MS pathogenesis. Repetitive elements Alu, LINE-1 and SAT-α, are widely known as estimators of global DNA methylation. We investigated Alu, LINE-1 and SAT-α methylation levels to evaluate their difference in a case-control setup and their role as a marker of disability. We obtained blood samples from 51 MS patients and 137 healthy volunteers matched by gender, age and smoking. Methylation was assessed using bisulfite-PCR-pyrosequencing. For all participants, medical history, physical and neurological examinations and screening laboratory tests were collected. All repetitive elements were hypermethylated in MS patients compared to healthy controls. A lower Expanded Disability Status Scale (EDSS) score was associated with a lower levels of LINE-1 methylation for 'EDSS = 1.0' and '1.5 ≤ EDSS ≤ 2.5' compared to an EDSS higher than 3, while Alu was associated with a higher level of methylation in these groups: 'EDSS = 1.0' and '1.5 ≤ EDSS ≤ 2.5'. MS patients exhibit an hypermethylation in repetitive elements compared to healthy controls. Alu and LINE-1 were associated with degree of EDSS score. Forthcoming studies focusing on epigenetics and the multifactorial pathogenetic mechanism of MS could elucidate these links further.

  16. Order Information in Multiple-Element Comparison.

    Science.gov (United States)

    Angiolillo-Bent, Joel S.; Rips, Lance J.

    1982-01-01

    Two strings of letters were presented. Subjects were instructed to indicate whether the second string contained the same elements as the first, regardless of position. Reaction time increased with the number of positions that the letters were displaced. Results indicate that order may be an important factor in retrieval from memory. (Author/BW)

  17. Multiple microembolizations by elemental mercury. Multiple Mikroembolisationen durch elementares Quecksilber

    Energy Technology Data Exchange (ETDEWEB)

    Wedekind, G. (Radiologische Abt., Krankenhaus Porz am Rhein (Germany)); Beyer, D. (Radiologische Abt., Krankenhaus Porz am Rhein (Germany))

    1994-08-01

    Elemental mercury is usually found in the vascular system following intravenous injection. It is distributed in the body in two different ways, which are described in detail. We report the case of a 39-year-old male, who injected elemental mercury in his cubital vein in a suicide attept. This fact was detected accidentally during clinical treatment. Microemboli of metallic mercury were found in the lungs, liver, spleen, kidneys, central nervous system and other organs. A high serum concentration of dissolved and oxidized mercury was detected. No signs of chronic mercury intoxication in the form an organic functional disturbance were obvious. (orig.)

  18. Frequency selective surfaces with multiple periodic elements

    Science.gov (United States)

    Reed, Jeffrey Alan

    A thorough computer design study using the method of Chen1,2,3 was undertaken for band-pass filters constructed from frequency selective surfaces (FSSs). The FSSs, modeled as thin, perfectly conducting surfaces with periodically arranged apertures, were designed to produce a transmission profile with a bandpass characteristic centered at 10.6 μm and to have various specified bandwidths. The effects of aperture shape and dimensions, configuration and periodicity of the aperture array, and presence of a dielectric substrate were examined in- depth. For comparison purposes, a complimentary array of metallic patches was also examined. The successful design (a thin, planar sheet of aluminum perforated with narrow rectangular apertures in a triangular array configuration on a thick zinc selenide substrate) provided a preliminary set of basic design rules for creating bandpass filters from FSSs. Dual resonance transmission profiles were generated by considering a FSS with a group of apertures as the periodic element. Chen's method1,2,3 was modified to work with periodic groups of up to four rectangular or circular shaped apertures (or metallic patches). Combinations of different length narrow slot apertures, combinations of square and narrow slot apertures, and variation of periodicity along alternating rows of narrow slot apertures, all produced a dual resonance transmission profile in the computer model. For the combination of different length narrow apertures, the dual resonance resulted from the natural resonance associated with the two different length narrow apertures, while for the combination of squares and narrow slots, an enhancement of the Wood's anomaly at the diffraction edge created the second resonance peak. Variation of the periodicity along alternating rows produced a dual resonance because each of the 'superimposed arrays' had a different periodicity. The presence of Wood's anomalies in the transmission profile was also examined. Finally, 'proof of

  19. Quantification of multiple elements in dried blood spot samples

    DEFF Research Database (Denmark)

    Pedersen, Lise; Andersen-Ranberg, Karen; Hollergaard, Mads;

    2017-01-01

    BACKGROUND: Dried blood spots (DBS) is a unique matrix that offers advantages compared to conventional blood collection making it increasingly popular in large population studies. We here describe development and validation of a method to determine multiple elements in DBS. METHODS: Elements were...... extracted from punches and analyzed using inductively coupled plasma-mass spectrometry (ICP-MS). The method was evaluated with quality controls with defined element concentration and blood spiked with elements to assess accuracy and imprecision. DBS element concentrations were compared with concentrations...... in venous blood. Samples with different hematocrit were spotted onto filter paper to assess hematocrit effect. RESULTS: The established method was precise and accurate for measurement of most elements in DBS. There was a significant but relatively weak correlation between measurement of the elements Mg, K...

  20. having multiple arcs with gap shaped roughness element on abs

    African Journals Online (AJOL)

    DR OKE

    having multiple arcs with gap shaped roughness element on absorber plate ... spaced, clear and black glass plates, single smooth metal sheets, flow through stacked screen or mesh, corrugated metal plates, finned metal sheets and others. ..... Exergy analysis of a flat plate collector, Journal of Energy in Southern Africa, Vol.

  1. Scattering optical elements: stand-alone optical elements exploiting multiple light scattering

    CERN Document Server

    Park, Jongchan; Park, Chunghyun; Lee, KyeoReh; Lee, Heon; Cho, Yong-Hoon; Park, YongKeun

    2016-01-01

    Optical design and fabrication techniques are crucial for making optical elements. From conventional lenses to diffractive optical elements, and to recent metasurfaces, various types of optical elements have been proposed to manipulate light where optical materials are fabricated into desired structures. Here, we propose a scattering optical element (SOE) which exploits multiple light scattering and wavefront shaping. Instead of fabricating optical materials, the SOE consists of a disordered medium and a photopolymer-based wavefront recorder, with shapes the wavefront of impinging light on demand. With the proposed stand-alone SOEs, we experimentally demonstrate control of various properties of light, including intensity, polarisation, spectral frequency and near field. Due to the tremendous freedom brought about by disordered media, the proposed approach will provide unexplored routes to manipulate arbitrary optical fields in stand-alone optical elements.

  2. Characterization of Multiple Delaminated Composite by Finite Element

    Directory of Open Access Journals (Sweden)

    SUDIP DEY

    2011-09-01

    Full Text Available In this paper, a finite element method is employed to investigate the natural frequencies of twisted rotating composite turbine blades subject to multiple delamination. The turbine blade is idealized as a shallow conical shell model with low aspect ratio. The formulation is based on Mindlin’s theory, QR iteration and multi-point constraint algorithm for moderate rotational speeds neglecting Coriolis effect. Computer codes are developed and the numerical results obtained for multiple delaminated graphite-epoxy cross-ply composite shallow conical shells are the first known non-dimensional frequencies for the type of analyses carried out here.

  3. Finite element modelling of internal and multiple localized cracks

    Science.gov (United States)

    Saloustros, Savvas; Pelà, Luca; Cervera, Miguel; Roca, Pere

    2017-02-01

    Tracking algorithms constitute an efficient numerical technique for modelling fracture in quasi-brittle materials. They succeed in representing localized cracks in the numerical model without mesh-induced directional bias. Currently available tracking algorithms have an important limitation: cracking originates either from the boundary of the discretized domain or from predefined "crack-root" elements and then propagates along one orientation. This paper aims to circumvent this drawback by proposing a novel tracking algorithm that can simulate cracking starting at any point of the mesh and propagating along one or two orientations. This enhancement allows the simulation of structural case-studies experiencing multiple cracking. The proposed approach is validated through the simulation of a benchmark example and an experimentally tested structural frame under in-plane loading. Mesh-bias independency of the numerical solution, computational cost and predicted collapse mechanisms with and without the tracking algorithm are discussed.

  4. Keratometry and corneal topography using multiple delay element OCT

    Science.gov (United States)

    Plesea, Lucian; Podoleanu, Adrian G.

    2008-02-01

    We have presented previously a novel method for the evaluation of the surface shape of an object, with immediate application to measurement of cornea shape. This method uses single shot C-scans obtained by using a multiple delay element (MDE) in the reference path of an OCT system. A calibrated MDE-OCT system can be used to measure the elevation of points on the cornea, in contrast to existing methods which are based on measurement of the cornea slope. The associated algorithm for extracting corneal topography data points from the MDE-OCT C-Scan image will be presented, data points which can then be used to calculate the Zernike coefficients for the cornea shape. The differences between the existing systems and the MDE-OCT method for keratometry and corneal topography are discussed.

  5. On the Design and Analysis of Multiple-Storage Elements

    Science.gov (United States)

    1989-12-01

    A. S. Sedra and K. C. Smith , Microelectronic Circuits, 2 ,d ed., pp. 881, CBS College Publishing, New York, New York, 1987. 20. K. W. Current, "A CMOS...introduction: multiple-valued logic," Computer, Vol. 21, pp. 13-14, April 1988. 3. K. C. Smith , "Multiple-valued logic: a tutorial and appreciation...Logic, pp. 195-201, May 1989. 9. H. L. Ho and K. C. Smith , "Switched capacitor circuits in the implementation of multiple-valued logic," Proceedings of

  6. A Code Division Technique for Multiple Element Synthetic Aperture Transmission

    DEFF Research Database (Denmark)

    Gran, Fredrik; Jensen, Jørgen Arendt; Jakobsson, Andreas

    2004-01-01

    a method in which all transmitting centers can be excited at the same time and separated at the receiver. Hereby the benefits from traditional STA can be utilized and a high fframe rate can be maintained and the images are not influenced by motion artifacts. The different centers are excited using mutually....... The method was verified using Field II. A 7 MHz transducer was simulated with 128 receiving elements and 64 transmitting elements divided into subapertures so that 4 virtual transmission centers were formed. The point spread function was measured and the axial resolution was 0.2312 mm (-3dB) and 0.3083 mm...

  7. ϕ-Prime and ϕ-Primary Elements in Multiplicative Lattices

    Directory of Open Access Journals (Sweden)

    C. S. Manjarekar

    2014-01-01

    Full Text Available We investigate ϕ-prime and ϕ-primary elements in a compactly generated multiplicative lattice L. By a counterexample, it is shown that a ϕ-primary element in L need not be primary. Some characterizations of ϕ-primary and ϕ-prime elements in L are obtained. Finally, some results for almost prime and almost primary elements in L with characterizations are obtained.

  8. Development of multiple-surface optical elements for road lighting.

    Science.gov (United States)

    Kravchenko, Sergey V; Byzov, Egor V; Moiseev, Mikhail A; Doskolovich, Leonid L

    2017-02-20

    The development of LED secondary optics for road illumination is quite a challenging problem. Optical elements developed for this kind of application should have maximal efficiency, provide high luminance and illuminance uniformity, and meet many other specific requirements. Here, we demonstrate that the usage of the supporting quadric method modification enables generating free-form optical solution satisfying all these requirements perfectly. As an example, two optical elements for different roadway types are computed, manufactured by injection molding, and then measured in a photometry bench. Experimental data demonstrate that the obtained light distributions meet ME1 class requirements of EN 13201 standard. The obtained directivity patterns are universal and provide high performance with different configurations of luminaires' arrangement: the ratio of pole altitude to distance can vary from 2.5 up to 3.6.

  9. Multiple orbital angular momentum generated by dielectric hybrid phase element

    Science.gov (United States)

    Wang, Xuewen; Kuchmizhak, Aleksandr; Hu, Dejiao; Li, Xiangping

    2017-09-01

    Vortex beam carrying multiple orbital angular momentum provides a new degree of freedom to manipulate light leading to the various exciting applications as trapping, quantum optics, information multiplexing, etc. Helical wavefront can be generated either via the geometric or the dynamic phase arising from a space-variant birefringence (q-plate) or from phase accumulation through propagation (spiral-phase-plate), respectively. Using fast direct laser writing technique we fabricate and characterize novel hybrid q-plate generating vortex beam simultaneously carrying two different high-order topological charges, which arise from the spin-orbital conversion and the azimuthal height variation of the recorded structures. We approve the versatile concept to generate multiple-OAM vortex beams combining the spin-orbital interaction and the phase accumulation in a single micro-scale device, a hybrid dielectric phase plate.

  10. Multiple-image encryption algorithm based on mixed image element and permutation

    Science.gov (United States)

    Zhang, Xiaoqiang; Wang, Xuesong

    2017-05-01

    To improve encryption efficiency and facilitate the secure transmission of multiple digital images, by defining the pure image element and mixed image element, this paper presents a new multiple-image encryption (MIE) algorithm based on the mixed image element and permutation, which can simultaneously encrypt any number of images. Firstly, segment the original images into pure image elements; secondly, scramble all the pure image elements with the permutation generated by the piecewise linear chaotic map (PWLCM) system; thirdly, combine mixed image elements into scrambled images; finally, diffuse the content of mixed image elements by performing the exclusive OR (XOR) operation among scrambled images and the chaotic image generated by another PWLCM system. The comparison with two similar algorithms is made. Experimental results and algorithm analyses show that the proposed MIE algorithm is very simple and efficient, which is suitable for practical image encryption.

  11. A prediction method for aerodynamic sound produced by multiple elements in air ducts

    Science.gov (United States)

    Mak, C. M.

    2005-10-01

    A prediction method for aerodynamic sound produced by the interaction of multiple elements in a low speed flow duct has been developed. Same as the previous works of Mak and Yang for two in-duct elements, the concept of partially coherent sound fields is adopted to formulate the sound powers produced by interaction of multiple in-duct elements at frequencies below and above the cut-on frequency of the lowest transverse duct mode. An interaction factor is finally defined as a result of a simple relationship between the sound power due to the interaction of multiple in-duct elements and that due to a single in-duct element. The present study suggests that it is possible to predict the level and spectral distribution of the additional acoustic energy produced by the interaction of multiple in-duct elements. The proposed method therefore can form a basis of a generalized prediction method for aerodynamic sound produced by multiple in-duct elements in a ventilation system.

  12. Scanning sequences after Gibbs sampling to find multiple occurrences of functional elements

    Directory of Open Access Journals (Sweden)

    Landsman David

    2006-09-01

    Full Text Available Abstract Background Many DNA regulatory elements occur as multiple instances within a target promoter. Gibbs sampling programs for finding DNA regulatory elements de novo can be prohibitively slow in locating all instances of such an element in a sequence set. Results We describe an improvement to the A-GLAM computer program, which predicts regulatory elements within DNA sequences with Gibbs sampling. The improvement adds an optional "scanning step" after Gibbs sampling. Gibbs sampling produces a position specific scoring matrix (PSSM. The new scanning step resembles an iterative PSI-BLAST search based on the PSSM. First, it assigns an "individual score" to each subsequence of appropriate length within the input sequences using the initial PSSM. Second, it computes an E-value from each individual score, to assess the agreement between the corresponding subsequence and the PSSM. Third, it permits subsequences with E-values falling below a threshold to contribute to the underlying PSSM, which is then updated using the Bayesian calculus. A-GLAM iterates its scanning step to convergence, at which point no new subsequences contribute to the PSSM. After convergence, A-GLAM reports predicted regulatory elements within each sequence in order of increasing E-values, so users have a statistical evaluation of the predicted elements in a convenient presentation. Thus, although the Gibbs sampling step in A-GLAM finds at most one regulatory element per input sequence, the scanning step can now rapidly locate further instances of the element in each sequence. Conclusion Datasets from experiments determining the binding sites of transcription factors were used to evaluate the improvement to A-GLAM. Typically, the datasets included several sequences containing multiple instances of a regulatory motif. The improvements to A-GLAM permitted it to predict the multiple instances.

  13. Multiple-contact discrete-element model for simulating dense granular media

    Science.gov (United States)

    Brodu, Nicolas; Dijksman, Joshua A.; Behringer, Robert P.

    2015-03-01

    This article presents a new force model for performing quantitative simulations of dense granular materials. Interactions between multiple contacts (MC) on the same grain are explicitly taken into account. Our readily applicable MC-DEM method retains all the advantages of discrete-element method simulations and does not require the use of costly finite-element methods. The new model closely reproduces our recent experimental measurements, including contact force distributions in full 3D, at all compression levels of the packing up to the experimental maximum limit of 13%. Comparisons with classic simulations using the nondeformable spheres approach, as well as with alternative models for interactions between multiple contacts, are provided. The success of our model, compared to these alternatives, demonstrates that interactions between multiple contacts on each grain must be included for dense granular packings.

  14. Thermoelastic analysis of multiple defects with the extended finite element method

    Science.gov (United States)

    Jia, Honggang; Nie, Yufeng

    2016-12-01

    In this paper, the extended finite element method (XFEM) is adopted to analyze the interaction between a single macroscopic inclusion and a single macroscopic crack as well as that between multiple macroscopic or microscopic defects under thermal/mechanical load. The effects of different shapes of multiple inclusions on the material thermomechanical response are investigated, and the level set method is coupled with XFEM to analyze the interaction of multiple defects. Further, the discretized extended finite element approximations in relation to thermoelastic problems of multiple defects under displacement or temperature field are given. Also, the interfaces of cracks or materials are represented by level set functions, which allow the mesh assignment not to conform to crack or material interfaces. Moreover, stress intensity factors of cracks are obtained by the interaction integral method or the M-integral method, and the stress/strain/stiffness fields are simulated in the case of multiple cracks or multiple inclusions. Finally, some numerical examples are provided to demonstrate the accuracy of our proposed method.

  15. Thermoelastic analysis of multiple defects with the extended finite element method

    Institute of Scientific and Technical Information of China (English)

    Honggang Jia; Yufeng Nie

    2016-01-01

    In this paper, the extended finite element method (XFEM) is adopted to analyze the interaction between a sin-gle macroscopic inclusion and a single macroscopic crack as well as that between multiple macroscopic or micro-scopic defects under thermal/mechanical load. The effects of different shapes of multiple inclusions on the material thermomechanical response are investigated, and the level set method is coupled with XFEM to analyze the interaction of multiple defects. Further, the discretized extended finite element approximations in relation to thermoelastic prob-lems of multiple defects under displacement or temperature field are given. Also, the interfaces of cracks or materials are represented by level set functions, which allow the mesh assignment not to conform to crack or material interfaces. Moreover, stress intensity factors of cracks are obtained by the interaction integral method or the M-integral method, and the stress/strain/stiffness fields are simulated in the case of multiple cracks or multiple inclusions. Finally, some numer-ical examples are provided to demonstrate the accuracy of our proposed method.

  16. Visual processing of multiple elements in the dyslexic brain: evidence for a superior parietal dysfunction

    Directory of Open Access Journals (Sweden)

    Muriel Anne Lobier

    2014-07-01

    Full Text Available The visual attention (VA span deficit hypothesis of developmental dyslexia posits that impaired multiple element processing can be responsible for poor reading outcomes. In VA span impaired dyslexic children, poor performance on letter report tasks is associated with reduced parietal activations for multiple letter processing. While this hints towards a non-specific, attention-based dysfunction, it is still unclear whether reduced parietal activity generalizes to other types of stimuli. Furthermore, putative links between reduced parietal activity and reduced ventral occipito-temporal (vOT in dyslexia have yet to be explored. Using fMRI, we measured brain activity in 12 VA span impaired dyslexic adults and 12 adult skilled readers while they carried out a categorization task on single or multiple alphanumeric or non-alphanumeric characters. While healthy readers activated parietal areas more strongly for multiple than single element processing (right-sided for alphanumeric and bilateral for non-alphanumeric, similar stronger multiple element right parietal activations were absent for dyslexic participants. Contrasts between skilled and dyslexic readers revealed significantly reduced right superior parietal lobule (SPL activity for dyslexic readers regardless of stimuli type. Using a priori anatomically defined ROI, we showed that neural activity was reduced for dyslexic participants in both SPL and vOT bilaterally. Finally, we used multiple regressions to test whether SPL activity could predict vOT activity in each group. In the left hemisphere, SPL activity modulated vOT activity for both normal and dyslexic readers. In contrast, in the right hemisphere, SPL activity modulated vOT activity only for dyslexic readers. These results bring critical support to the visual attention interpretation of the VA Span deficit. In addition, they offer a new insight on how deficits in automatic vOT based word recognition could arise in developmental dyslexia.

  17. Serum chemical elements and oxidative status in Alzheimer's disease, Parkinson disease and multiple sclerosis.

    Science.gov (United States)

    Alimonti, Alessandro; Ristori, Giovanni; Giubilei, Franco; Stazi, Maria Antonia; Pino, Anna; Visconti, Andrea; Brescianini, Sonia; Sepe Monti, Micaela; Forte, Giovanni; Stanzione, Paolo; Bocca, Beatrice; Bomboi, Giuseppe; D'Ippolito, Cristina; Annibali, Viviana; Salvetti, Marco; Sancesario, Giuseppe

    2007-05-01

    The role of some chemical elements in neurodegeneration was suggested by various authors. To obtain a profile of chemical elements and oxidative status in complex neurological diseases, an unbiased "omics" approach, i.e., quantification of 26 elements and oxidative stress parameters (serum oxidative status (SOS) and serum anti-oxidant capacity (SAC)), combined with multivariate statistical procedures (forward discriminant analysis, FDA) to analyse the vast amount of data, was applied to four groups of subjects (53 patients with Alzheimer's disease (AD), 71 with Parkinson disease (PD), 60 with multiple sclerosis (MS) and 124 healthy individuals). Descriptive statistics revealed numerous differences between each disease and healthy status. A concordant imbalance (reduction in Fe, Zn and SAC, and increase in SOS) was shared by AD, PD and MS. The FDA yielded three significant discriminant functions based on age, SOS, Ca, Fe, Si, Sn, V, Zn and Zr, and identified disease-specific profiles of element imbalances, thus showing the appropriateness of the "omics" approach. It may help assess the contribution of chemical elements and oxidative stress to disease causation and may provide complex predictors of disease evolution or treatment response.

  18. HiCoDG: A Hierarchical Data-Gathering Scheme Using Cooperative Multiple Mobile Elements

    Science.gov (United States)

    Van Le, Duc; Oh, Hoon; Yoon, Seokhoon

    2014-01-01

    In this paper, we study mobile element (ME)-based data-gathering schemes in wireless sensor networks. Due to the physical speed limits of mobile elements, the existing data-gathering schemes that use mobile elements can suffer from high data-gathering latency. In order to address this problem, this paper proposes a new hierarchical and cooperative data-gathering (HiCoDG) scheme that enables multiple mobile elements to cooperate with each other to collect and relay data. In HiCoDG, two types of mobile elements are used: the mobile collector (MC) and the mobile relay (MR). MCs collect data from sensors and forward them to the MR, which will deliver them to the sink. In this work, we also formulated an integer linear programming (ILP) optimization problem to find the optimal trajectories for MCs and the MR, such that the traveling distance of MEs is minimized. Two variants of HiCoDG, intermediate station (IS)-based and cooperative movement scheduling (CMS)-based, are proposed to facilitate cooperative data forwarding from MCs to the MR. An analytical model for estimating the average data-gathering latency in HiCoDG was also designed. Simulations were performed to compare the performance of the IS and CMS variants, as well as a multiple traveling salesman problem (mTSP)-based approach. The simulation results show that HiCoDG outperforms mTSP in terms of latency. The results also show that CMS can achieve the lowest latency with low energy consumption. PMID:25526356

  19. HiCoDG: A Hierarchical Data-Gathering Scheme Using Cooperative Multiple Mobile Elements

    Directory of Open Access Journals (Sweden)

    Duc Van Le

    2014-12-01

    Full Text Available In this paper, we study mobile element (ME-based data-gathering schemes in wireless sensor networks. Due to the physical speed limits of mobile elements, the existing data-gathering schemes that usemobile elements can suffer from high data-gathering latency. In order to address this problem, this paper proposes a new hierarchical and cooperative data-gathering (HiCoDG scheme that enables multiple mobile elements to cooperate with each other to collect and relay data. In HiCoDG, two types of mobile elements are used: the mobile collector (MC and the mobile relay (MR. MCs collect data from sensors and forward them to the MR, which will deliver them to the sink. In this work, we also formulated an integer linear programming (ILP optimization problem to find the optimal trajectories for MCs and the MR, such that the traveling distance of MEs is minimized. Two variants of HiCoDG, intermediate station (IS-based and cooperative movement scheduling (CMS-based, are proposed to facilitate cooperative data forwarding from MCs to theMR. An analytical model for estimating the average data-gathering latency in HiCoDG was also designed. Simulations were performed to compare the performance of the IS and CMS variants, as well as a multiple traveling salesman problem (mTSP-based approach. The simulation results show that HiCoDG outperformsmTSP in terms of latency. The results also show that CMS can achieve the lowest latency with low energy consumption.

  20. HiCoDG: a hierarchical data-gathering scheme using cooperative multiple mobile elements.

    Science.gov (United States)

    Van Le, Duc; Oh, Hoon; Yoon, Seokhoon

    2014-12-17

    In this paper, we study mobile element (ME)-based data-gathering schemes in wireless sensor networks. Due to the physical speed limits of mobile elements, the existing data-gathering schemes that use mobile elements can suffer from high data-gathering latency. In order to address this problem, this paper proposes a new hierarchical and cooperative data-gathering (HiCoDG) scheme that enables multiple mobile elements to cooperate with each other to collect and relay data. In HiCoDG, two types of mobile elements are used: the mobile collector (MC) and the mobile relay (MR). MCs collect data from sensors and forward them to the MR, which will deliver them to the sink. In this work, we also formulated an integer linear programming (ILP) optimization problem to find the optimal trajectories for MCs and the MR, such that the traveling distance of MEs is minimized. Two variants of HiCoDG, intermediate station (IS)-based and cooperative movement scheduling (CMS)-based, are proposed to facilitate cooperative data forwarding from MCs to the MR. An analytical model for estimating the average data-gathering latency in HiCoDG was also designed. Simulations were performed to compare the performance of the IS and CMS variants, as well as a multiple traveling salesman problem (mTSP)-based approach. The simulation results show that HiCoDG outperforms mTSP in terms of latency. The results also show that CMS can achieve the lowest latency with low energy consumption.

  1. Trace elements in scalp hair samples from patients with relapsing-remitting multiple sclerosis.

    Directory of Open Access Journals (Sweden)

    Elisa Tamburo

    Full Text Available Epidemiological studies have suggested a possible role of trace elements (TE in the etiology of several neurological diseases including Multiple Sclerosis (MS. Hair analysis provides an easy tool to quantify TE in human subjects, including patients with neurodegenerative diseases.To compare TE levels in scalp hair from patients with MS and healthy controls from the same geographic area (Sicily.ICP-MS was used to determine the concentrations of 21 elements (Ag, Al, As, Ba, Cd, Co, Cr, Cu, Fe, Li, Mn, Mo, Ni, Pb, Rb, Sb, Se, Sr, U, V and Zn in scalp hair of 48 patients with relapsing-remitting Multiple Sclerosis compared with 51 healthy controls.MS patients showed a significantly lower hair concentration of aluminum and rubidium (median values: Al = 3.76 μg/g vs. 4.49 μg/g and Rb = 0.007 μg/g vs. 0.01 μg/g; and higher hair concentration of U (median values U: 0.014 μg/g vs. 0.007 μg/g compared to healthy controls. The percentages of MS patients showing hair elemental concentrations greater than the 95th percentile of controls were 20% for Ni, 19% for Ba and U, and 15% for Ag, Mo and Se. Conversely, the percentages of MS patients showing hair elemental concentrations lower than the 5th percentile of healthy controls were 27% for Al, 25% for Rb, 22% for Ag, 19% for Fe, and 16% for Pb. No significant association was found between levels of each TE and age, disease duration or Expanded Disability Status Scale (EDSS score. After stratification by gender, healthy subjects did not show any significant difference in trace element levels, while MS patients showed significant differences (p<0.01 for the concentrations of Ag, Cr, Fe, Ni and Sr. No significant differences were also found, at p<0.01, in relation to the use of cigarettes, consume of water, vegetables and place of living.The different distributions of TE in hair of MS patients compared to controls provides an additional indirect evidence of metabolic imbalance of chemical elements in the

  2. Multiple-Element Matching Reservoir Formation and Quantitative Prediction of Favorable Areas in Superimposed Basins

    Institute of Scientific and Technical Information of China (English)

    WANG Huaijie; PANG Xiongqi; WANG Zhaoming; YU Qiuhua; HUO Zhipeng; MENG Qingyang

    2010-01-01

    Superimposed basins in West China have experienced multi-stage tectonic events and multicycle hydrocarbon reservoir formation,and complex hydrocarbon reservoirs have been discovered widely in basins of this kind.Most of the complex hydrocarbon reservoirs are characterized by relocation,scale re-construction,component variation and phase state transformation,and their distributions are very difficult to predict.Research shows that regional caprock(C),high-quality sedimentary facies(Deposits,D),paleohighs(Mountain,M)and source rock(S)are four geologic elements contributing to complex hydrocarbon reservoir formation and distribution of western superimposed basins.Longitudinal sequential combinations of the four elements control the strata of hydrocarbon reservoir formation,and planar superimpositions and combinations control the range of hydrocarbon reservoir and their simultaneous joint effects in geohistory determine the time of hydrocarbon reservoir formation.Multiple-element matching reservoir formation presents a basic mode of reservoir formation in superimposed basins,and we recommend it is expressed as T-CDMS.Based on the multiple-element matching reservoir formation mode,a comprehensive reservoir formation index(Tcdms)is developed in this paper to characterize reservoir formation conditions,and a method is presented to predict reservoir formation range and probability of occurrence in superimposed basins.Through application of new theory,methods and technology,the favorable reservoir formation range and probability of occurrence in the Ordovician target zone in Tarim Basin in four different reservoir formation periods are predicted.Results show that central Tarim,Yinmaili and Lunnan are the three most favorable regions where Ordovician oil and gas fields may have formed.The coincidence of prediction results with currently discovered hydrocarbon reservoirs reaches 97%.This reflects the effectiveness and reliability of the new theory,methods and technology.

  3. A search for superheavy elements in meteorites using a neutron multiplicity detector

    Energy Technology Data Exchange (ETDEWEB)

    Barton, J.C. (Birkbeck Coll., London (United Kingdom)); Hatton, C.J. (Leeds Univ. (United Kingdom). Dept. of Combined Studies); McMillan, J.E. (Leeds Univ. (United Kingdom). Dept. of Physics)

    1991-12-01

    A search for superheavy element fission events in meteoritic samples was made using a novel neutron multiplicity detector which was operated underground. No differences could be detected between samples of meteoritic and terrestrial materials. All multiple neutron events could be attributed either to very small amounts of fissile material contaminating the detector materials or to the effects of cosmic rays. An upper limit of 1.3 kg{sup -1}y{sup -1} for the fission rate in meteorites is derived. Assuming the half life to be 10{sup 9}y, this translates to a concentration of <1.0 x 10{sup -15}kg kg{sup -1} which is below all previous measurements. (author).

  4. Multiple Sclerosis in the Mount Etna Region: Possible Role of Volcanogenic Trace Elements

    Science.gov (United States)

    Nicoletti, Alessandra; Bruno, Elisa; Nania, Martina; Cicero, Edoardo; Messina, Silvia; Chisari, Clara; Torrisi, Josita; Maimone, Davide; Marziolo, Roberto; Lo Fermo, Salvatore; Patti, Francesco; Giammanco, Salvatore; Zappia, Mario

    2013-01-01

    Background Trace elements have been hypothesised to be involved in the pathogenesis of Multiple Sclerosis and volcanic degassing is the major natural sources of trace elements. Both incidence of Multiple Sclerosis in Catania and volcanic activity of Mount Etna have been significantly increased during the last 30 years. Due to prevailing trade winds direction, volcanic gases from Etna summit craters are mostly blown towards the eastern and southern sectors of the volcano. Objective To evaluate the possible association between Multiple Sclerosis and exposure to volcanogenic trace elements. Methods We evaluated prevalence and incidence of Multiple Sclerosis in four communities (47,234 inhabitants) located in the eastern flank and in two communities (52,210 inhabitants) located in the western flank of Mount Etna, respectively the most and least exposed area to crater gas emissions. Results A higher prevalence was found in the population of the eastern flank compared to the population of the western one (137.6/100,000 versus 94.3/100,000; p-value 0.04). We found a borderline significantly higher incidence risk during the incidence study period (1980–2009) in the population of the eastern flank 4.6/100,000 (95% CI 3.1–5.9), compared with the western population 3.2/100,000 (95% CI 2.4–4.2) with a RR of 1.41 (95% CI 0.97–2.05; p-value 0.06). Incidence risks have increased over the time in both populations reaching a peak of 6.4/100,000 in the eastern flank and of 4.4/100.000 in the western flank during 2000–2009. Conclusion We found a higher prevalence and incidence of Multiple Sclerosis among populations living in the eastern flank of Mount Etna. According to our data a possible role of TE cannot be ruled out as possible co-factor in the MS pathogenesis. However larger epidemiological study are needed to confirm this hypothesis. PMID:24348986

  5. Stress Concentration Study of Laminated Composite with Multiple Holes by Finite Element Analysis

    Directory of Open Access Journals (Sweden)

    Anand.A

    2016-10-01

    Full Text Available A “Composite” is considered as one material when two or more different materials combined together to create superior material. A composite laminate is a composite with combination of layers. They have great applications in many engineering domains like civil, marine, aerospace, biomedical etc. because of their excellent properties like low weight, better mechanical properties and ease of handling and low cost of production. The practical applications of composites enables that the composite structures usually consist cutouts in it in order to get the required design. Thus it is essential to study the behaviour of composites with multiple holes with respect to different applications in order to provide structural stability and to attain better design and mechanical Properties. This work presents Analytical and Finite Element Analysis of rectangular plate with and without multiple circular cut-outs of various sizes. The work is checked for deformation and stress obtained for various loads .The material considered was Glass/Epoxy laminate. The deformation and stress distribution for various loads is analysed by Ansys software. The specimens used are plate without hole, plate with 3 holes of 5mm each, plate with 6mm holes, plate with 8mm holes and plate with 10mm holes. The analytical and numerical results are compared in Stress - Strain curves and Load - Deformation curves and found that both are in good agreement

  6. On the distribution of trace element concentrations in multiple bone elements in 10 Danish medieval and post-medieval individuals.

    Science.gov (United States)

    Lund Rasmussen, Kaare; Skytte, Lilian; D'imporzano, Paolo; Orla Thomsen, Per; Søvsø, Morten; Lier Boldsen, Jesper

    2017-01-01

    The differences in trace element concentrations among 19 different bone elements procured from 10 archaeologically derived human skeletons have been investigated. The 10 individuals are dated archaeologically and some by radiocarbon dating to the medieval and post-medieval period, an interval from ca. AD 1150 to ca. AD 1810. This study is relevant for two reasons. First, most archaeometric studies analyze only one bone sample from each individual; so to what degree are the bones in the human body equal in trace element chemistry? Second, differences in turnover time of the bone elements makes the cortical tissues record the trace element concentrations in equilibrium with the blood stream over a longer time earlier in life than the trabecular. Therefore, any differences in trace element concentrations between the bone elements can yield what can be termed a chemical life history of the individual, revealing changes in diet, provenance, or medication throughout life. Thorough decontamination and strict exclusion of non-viable data has secured a dataset of high quality. The measurements were carried out using Inductively Coupled Plasma Mass Spectrometry (for Fe, Mn, Al, Ca, Mg, Na, Ba, Sr, Zn, Pb and As) and Cold Vapor Atomic Absorption Spectroscopy (for Hg) on ca. 20 mg samples. Twelve major and trace elements have been measured on 19 bone elements from 10 different individuals interred at five cemeteries widely distributed in medieval and renaissance Denmark. The ranges of the concentrations of elements were: Na (2240-5660 µg g(-1) ), Mg (440-2490 µg g(-1) ), Al (9-2030 µg g(-1) ), Ca (22-36 wt. %), Mn (5-11450 µg g(-1) ), Fe (32-41850 µg g(-1) ), Zn (69-2610 µg g(-1) ), As (0.4-120 µg g(-1) ), Sr (101-815 µg g(-1) ), Ba (8-880 µg g(-1) ), Hg (7-78730 ng g(-1) ), and Pb (0.8-426 µg g(-1) ). It is found that excess As is mainly of diagenetic origin. The results support that Ba and Sr concentrations are effective provenance or dietary indicators

  7. Multi-gene gateway clone design for expression of multiple heterologous genes in living cells: modular construction of multiple cDNA expression elements using recombinant cloning.

    Science.gov (United States)

    Sone, Takefumi; Yahata, Kazuhide; Sasaki, Yukari; Hotta, Junko; Kishine, Hiroe; Chesnut, Jonathan D; Imamoto, Fumio

    2008-09-10

    Much attention has been focused on manipulating multiple genes in living cells for analyzing protein function. In order to perform high-throughput generation of multi-gene expression clones, gateway cloning technology (which represents a high-throughput DNA transfer from vector to vector) can be anticipated. In the conventional strategy for gateway cloning, the construction of two or more expression elements into tandem elements on a single plasmid requires the recombination of multiple entry clones with a destination vector in a single reaction mixture. Use of increasing numbers of entry clones in a single reaction is inefficient due to the difficulty in successfully recognizing multiple pairs of matched att signals simultaneously. To address this problem, a "Modular Destination" vector has been devised and constructed, whereby cDNA inserts are sequentially introduced, resulting in a tandem structure with multiple inserts. Whereas the standard destination vector contains only Cm(R) and ccdB genes flanked by two attR signals, this destination vector contains, in addition, one or two cDNA expression elements. Here, we show the rapid construction of expression vectors containing three or four tandemly arrayed cDNA expression elements and their expression in mammalian cells.

  8. Involvement of multiple elements in FXR-mediated transcriptional activation of FGF19.

    Science.gov (United States)

    Miyata, Masaaki; Hata, Tatsuya; Yamakawa, Hiroki; Kagawa, Tatehiro; Yoshinari, Kouichi; Yamazoe, Yasushi

    2012-10-01

    The intestinal endocrine hormone human fibroblast growth factor 19 (FGF19) is involved in the regulation of not only hepatic bile acid metabolism but also carbohydrate and lipid metabolism. In the present study, bile acid/farnesoid X receptor (FXR) responsiveness in the FGF19 promoter region was investigated by a reporter assay using the human colon carcinoma cell line LS174T. The assay revealed the presence of bile acid/FXR-responsive elements in the 5'-flanking region up to 8.8 kb of FGF19. Deletion analysis indicated that regions from -1866 to -1833, from -1427 to -1353, and from -75 to +262 were involved in FXR responsiveness. Four, four, and two consecutive half-sites of nuclear receptors were observed in the three regions, respectively. An electrophoretic mobility shift assay (EMSA) and chromatin immunoprecipitation (ChIP) assay revealed FXR/retinoid X receptor α (RXRα) heterodimer binding in these three regions. EMSA and reporter assays using mutated constructs indicated that the nuclear receptor IR1, ER2, and DR8 motifs in the 5'-flanking region were involved in FXR responsiveness of FGF19. Lithocholic acid (LCA) (10 μM), chenodeoxycholic acid (CDCA) (10 μM), or GW4064 (0.1 μM) treatment increased reporter activity in a construct including the three motifs under FXR-expressing conditions whereas LCA and not CDCA or GW4064 treatment increased the reporter activity under pregnane X receptor (PXR)-expressing conditions. These results suggest that FGF19 is transcriptionally activated through multiple FXR-responsive elements in the promoter region.

  9. Multi-element fingerprinting and high throughput sequencing identify multiple elements that affect fungal communities in Quercus macrocarpa foliage.

    Science.gov (United States)

    Jumpponen, Ari; Keating, Karen; Gadbury, Gary; Jones, Kenneth L; Mattox, J David

    2010-09-01

    Diverse fungal mutualists, pathogens and saprobes colonize plant leaves. These fungi face a complex environment, in which stochastic dispersal interplays with abiotic and biotic filters. However, identification of the specific factors that drive the community assembly seems unattainable. We mined two broad data sets and identified chemical elements, to which dominant molecular operational taxonomic units (OTUs) in the foliage of a native tree respond most extremely. While many associations could be identified, potential complicating issues emerged. Those were related to unevenly distributed OTU frequency data, a large number of potentially explanatory variables, and the disproportionate effects of outlier observations.

  10. An RNA Element That Facilitates Programmed Ribosomal Readthrough in Turnip Crinkle Virus Adopts Multiple Conformations.

    Science.gov (United States)

    Kuhlmann, Micki M; Chattopadhyay, Maitreyi; Stupina, Vera A; Gao, Feng; Simon, Anne E

    2016-10-01

    Ribosome recoding is used by RNA viruses for translational readthrough or frameshifting past termination codons for the synthesis of extension products. Recoding sites, along with downstream recoding stimulatory elements (RSEs), have long been studied in reporter constructs, because these fragments alone mediate customary levels of recoding and are thus assumed to contain complete instructions for establishment of the proper ratio of termination to recoding. RSEs from the Tombusviridae and Luteoviridae are thought to be exceptions, since they contain a long-distance RNA-RNA connection with the 3' end. This interaction has been suggested to substitute for pseudoknots, thought to be missing in tombusvirid RSEs. We provide evidence that the phylogenetically conserved RSE of the carmovirus Turnip crinkle virus (TCV) adopts an alternative, smaller structure that extends an upstream conserved hairpin and that this alternative structure is the predominant form of the RSE within nascent viral RNA in plant cells and when RNA is synthesized in vitro The TCV RSE also contains an internal pseudoknot along with the long-distance interaction, and the pseudoknot is not compatible with the phylogenetically conserved structure. Conserved residues just past the recoding site are important for recoding, and these residues are also conserved in the RSEs of gammaretroviruses. Our data demonstrate the dynamic nature of the TCV RSE and suggest that studies using reporter constructs may not be effectively recapitulating RSE-mediated recoding within viral genomes. Ribosome recoding is used by RNA viruses to enable ribosomes to extend translation past termination codons for the synthesis of longer products. Recoding sites and a downstream recoding stimulatory element (RSE) mediate expected levels of recoding when excised and placed in reporter constructs and thus are assumed to contain complete instructions for the establishment of the proper ratio of termination to recoding. We provide

  11. The alr-groEL1 operon in Mycobacterium tuberculosis: an interplay of multiple regulatory elements

    Science.gov (United States)

    Bhat, Aadil H.; Pathak, Deepika; Rao, Alka

    2017-01-01

    Threonylcarbamoyladenosine is a universally conserved essential modification of tRNA that ensures translational fidelity in cellular milieu. TsaD, TsaB and TsaE are identified as tRNA-A37-threonylcarbamoyl (t6A)-transferase enzymes that have been reconstituted in vitro, in few bacteria recently. However, transcriptional organization and regulation of these genes are not known in any of these organisms. This study describes the intricate architecture of a complex multicistronic alr-groEL1 operon, harboring essential genes, namely tsaD, tsaB, tsaE, groES, groEL1, and alr (required for cell wall synthesis), and rimI encoding an N-α- acetyltransferase in Mycobacterium tuberculosis. Using northern blotting, RT-PCR and in vivo fluorescence assays, genes alr to groEL1 were found to constitute an ~6.3 kb heptacistronic operon with multiple internal promoters and an I-shaped intrinsic hairpin-like cis-regulatory element. A strong promoter PtsaD within the coding sequence of rimI gene is identified in M. tuberculosis, in addition. The study further proposes an amendment in the known bicistronic groESL1 operon annotation by providing evidence that groESL1 is co-transcribed as sub-operon of alr-groEL1 operon. The architecture of alr-groEL1 operon, conservation of the genetic context and a mosaic transcriptional profile displayed under various stress conditions convincingly suggest the involvement of this operon in stress adaptation in M. tuberculosis. PMID:28256563

  12. PDGF-A promoter and enhancer elements provide efficient and selective antineoplastic gene therapy in multiple cancer types.

    Science.gov (United States)

    Mishra, A; Ormerod, A K; Cibull, M L; Spear, B T; Kraner, S D; Kaetzel, D M

    2009-04-01

    Development of antineoplastic gene therapies is impaired by a paucity of transcription control elements with efficient, cancer cell-specific activity. We investigated the utility of promoter (AChP) and 5'-distal enhancer (ACE66) elements from the platelet-derived growth factor-A (PDGF-A) gene, which are hyperactive in many human cancers. Efficacy of these elements was tested in multiple tumor cell lines, both in cell culture and as tumor explants in athymic nude mice. Plasmid and viral vectors were constructed with the AChP promoter alone or in fusion with three copies of the ACE66 enhancer for expression of the prototype suicide gene, thymidine kinase (TK). ACE/AChP and AChP cassettes elicited ganciclovir (GCV)-induced cytotoxicity in multiple tumor cell lines. The ACE enhancer element also exhibited synergism with placental and liver-specific promoter elements. An adenovirus containing the AChP-TK cassette produced striking increases in GCV sensitivity in cultured tumor cell lines, as well as GCV-induced regression of U87 MG glioblastoma explants in vivo. TK expression was distributed throughout tumors receiving the therapeutic virus, whereas TdT-mediated dUTP nick end labeling (TUNEL) analysis revealed numerous regions undergoing apoptosis. Vascularization and reticulin fiber networks were less pronounced in virus-GCV-treated tumors, suggesting that both primary and stromal cell types may have been targeted. These studies provide proof-of-principle for utility of the PDGF-A promoter and ACE66 enhancer in antineoplastic gene therapy for a diverse group of human cancers.

  13. Multiple elemental exposures amongst workers at the Agbogbloshie electronic waste (e-waste) site in Ghana.

    Science.gov (United States)

    Srigboh, Roland Kofi; Basu, Niladri; Stephens, Judith; Asampong, Emmanuel; Perkins, Marie; Neitzel, Richard L; Fobil, Julius

    2016-12-01

    Electronic waste (e-waste) recycling is growing worldwide and raising a number of environmental health concerns. One of the largest e-waste sites is Agbogbloshie (Ghana). While several toxic elements have been reported in Agbogbloshie's environment, there is limited knowledge of human exposures there. The objectives of this study were to characterize exposures to several essential (copper, iron, manganese, selenium, zinc) and toxic (arsenic, cadmium, cobalt, chromium, mercury, nickel, lead) elements in the urine and blood of male workers (n = 58) at Agbogbloshie, as well as females (n = 11) working in activities that serve the site, and to relate these exposures to sociodemographic and occupational characteristics. The median number of years worked at the site was 5, and the average worker indicated being active in 6.8 tasks (of 9 key e-waste job categories). Additionally, we categorized four main e-waste activities (in brackets % of population self-reported main activity): dealing (22.4%), sorting (24.1%), dismantling (50%), and burning (3.4%) e-waste materials. Many blood and urinary elements (including essential ones) were within biomonitoring reference ranges. However, blood cadmium (1.2 μg/L median) and lead (6.4 μg/dl; 67% above U.S. CDC/NIOSH reference level), and urinary arsenic (38.3 μg/L; 39% above U.S. ATSDR value) levels were elevated compared to background populations elsewhere. Workers who burned e-waste tended to have the highest biomarker levels. The findings of this study contribute to a growing body of work at Agbogbloshie (and elsewhere) to document that individuals working within e-waste sites are exposed to a number of toxic elements, some at potentially concerning levels.

  14. The protist Trichomonas vaginalis harbors multiple lineages of transcriptionally active Mutator-like elements

    Directory of Open Access Journals (Sweden)

    Pereira Gonçalo AG

    2009-07-01

    Full Text Available Abstract Background For three decades the Mutator system was thought to be exclusive of plants, until the first homolog representatives were characterized in fungi and in early-diverging amoebas earlier in this decade. Results Here, we describe and characterize four families of Mutator-like elements in a new eukaryotic group, the Parabasalids. These Trichomonas vaginalis Mutator- like elements, or TvMULEs, are active in T. vaginalis and patchily distributed among 12 trichomonad species and isolates. Despite their relatively distinctive amino acid composition, the inclusion of the repeats TvMULE1, TvMULE2, TvMULE3 and TvMULE4 into the Mutator superfamily is justified by sequence, structural and phylogenetic analyses. In addition, we identified three new TvMULE-related sequences in the genome sequence of Candida albicans. While TvMULE1 is a member of the MuDR clade, predominantly from plants, the other three TvMULEs, together with the C. albicans elements, represent a new and quite distinct Mutator lineage, which we named TvCaMULEs. The finding of TvMULE1 sequence inserted into other putative repeat suggests the occurrence a novel TE family not yet described. Conclusion These findings expand the taxonomic distribution and the range of functional motif of MULEs among eukaryotes. The characterization of the dynamics of TvMULEs and other transposons in this organism is of particular interest because it is atypical for an asexual species to have such an extreme level of TE activity; this genetic landscape makes an interesting case study for causes and consequences of such activity. Finally, the extreme repetitiveness of the T. vaginalis genome and the remarkable degree of sequence identity within its repeat families highlights this species as an ideal system to characterize new transposable elements.

  15. A novel class of Helitron-related transposable elements in maize contain portions of multiple pseudogenes.

    Science.gov (United States)

    Gupta, Smriti; Gallavotti, Andrea; Stryker, Gabrielle A; Schmidt, Robert J; Lal, Shailesh K

    2005-01-01

    We recently described a maize mutant caused by an insertion of a Helitron type transposable element (Lal, S.K., Giroux, M.J., Brendel, V., Vallejos, E. and Hannah, L.C., 2003, Plant Cell, 15: 381-391). Here we describe another Helitron insertion in the barren stalk1 gene of maize. The termini of a 6525 bp insertion in the proximal promoter region of the mutant reference allele of maize barren stalk1 gene (ba1-ref) shares striking similarity to the Helitron insertion we reported in the Shrunken-2 gene. This insertion is embedded with pseudogenes that differ from the pseudogenes discovered in the mutant Shrunken-2 insertion. Using the common terminal ends of the mutant insertions as a query, we discovered other Helitron insertions in maize BAC clones. Based on the comparison of the insertion site and PCR amplified genomic sequences, these elements inserted between AT dinucleotides. These putative non-autonomous Helitron insertions completely lacked sequences similar to RPA (replication protein A) and DNA Helicases reported in other species. A blastn analysis indicated that both the 5' and 3' termini of Helitrons are repeated in the maize genome. These data provide strong evidence that Helitron type transposable elements are active and may have played an essential role in the evolution and expansion of the maize genome.

  16. Piezoelectric materials selection for sensor applications using finite element and multiple attribute decision-making approaches

    Science.gov (United States)

    Kumar, Anuruddh; Sharma, Anshul; Kumar, Rajeev; Vaish, Rahul; Chauhan, Vishal S.; Bowen, C. R.

    2015-03-01

    This paper examines the selection and performance evaluation of a variety of piezoelectric materials for cantilever-based sensor applications. The finite element analysis method is implemented to evaluate the relative importance of materials properties such as Young's Modulus (E), piezoelectric stress constants (e31), dielectric constant (ɛ) and Poisson's ratio (υ) for cantilever-based sensor applications. An analytic hierarchy process (AHP) is used to assign weights to the properties that are studied for the sensor structure under study. A technique for order preference by similarity to ideal solution (TOPSIS) is used to rank the performance of the piezoelectric materials in the context of sensor voltage outputs. The ranking achieved by the TOPSIS analysis is in good agreement with the results obtained from finite element method simulation. The numerical simulations show that K0.5Na0.5NbO3-LiSbO3 (KNN-LS) materials family is important for sensor application. Young's modulus (E) is most influencing material's property followed by piezoelectric constant (e31), dielectric constant (ɛ) and Poisson's ratio (υ) for cantilever-based piezoelectric sensor applications.

  17. Multiple Regulatory Elements in the Arabidopsis NIA1 Promoter Act Synergistically to Form a Nitrate Enhancer1[W][OA

    Science.gov (United States)

    Wang, Rongchen; Guan, Peizhu; Chen, Mingsheng; Xing, Xiujuan; Zhang, Yali; Crawford, Nigel M.

    2010-01-01

    To accommodate fluctuating nutrient levels in the soil, plants modulate their metabolism and root development via signaling mechanisms that rapidly reprogram the plant transcriptome. In the case of nitrate, over 1,000 genes are induced or repressed within minutes of nitrate exposure. To identify cis-regulatory elements that mediate these responses, an enhancer screen was performed in transgenic Arabidopsis (Arabidopsis thaliana) plants. A 1.8-kb promoter fragment from the nitrate reductase gene NIA1 was identified that acts as a nitrate enhancer when fused to a 35S minimal promoter. Enhancer activity was localized to a 180-bp fragment, and this activity could be enhanced by the addition of a 131-bp fragment from the nitrite reductase promoter. A promoter construct containing the 180- and 131-bp fragments was also induced by nitrite and repressed by ammonium, indicating that it was responsive to multiple nitrogen signals. To identify specific regulatory elements within the 180-bp NIA1 fragment, a transient expression system using agroinfiltration of Nicotiana benthamiana was developed. Deletion analysis identified three elements corresponding to predicted binding motifs for homeodomain/E-box, Myb, and Alfin1 transcription factors. A fully active promoter showing nitrate and nitrite enhancer activity equivalent to that of the wild-type 180-bp fragment could be built from these three elements if the spacing between the homeodomain/E-box and Myb-Alfin1 sites was equivalent to that of the native promoter. These findings were validated in transgenic Arabidopsis plants and identify a cis-regulatory module containing three elements that comprise a nitrate enhancer in the NIA1 promoter. PMID:20668061

  18. Detecting the limits of regulatory element conservation anddivergence estimation using pairwise and multiple alignments

    Energy Technology Data Exchange (ETDEWEB)

    Pollard, Daniel A.; Moses, Alan M.; Iyer, Venky N.; Eisen,Michael B.

    2006-08-14

    Background: Molecular evolutionary studies of noncodingsequences rely on multiple alignments. Yet how multiple alignmentaccuracy varies across sequence types, tree topologies, divergences andtools, and further how this variation impacts specific inferences,remains unclear. Results: Here we develop a molecular evolutionsimulation platform, CisEvolver, with models of background noncoding andtranscription factor binding site evolution, and use simulated alignmentsto systematically examine multiple alignment accuracy and its impact ontwo key molecular evolutionary inferences: transcription factor bindingsite conservation and divergence estimation. We find that the accuracy ofmultiple alignments is determined almost exclusively by the pairwisedivergence distance of the two most diverged species and that additionalspecies have a negligible influence on alignment accuracy. Conservedtranscription factor binding sites align better than surroundingnoncoding DNA yet are often found to be misaligned at relatively shortdivergence distances, such that studies of binding site gain and losscould easily be confounded by alignment error. Divergence estimates frommultiple alignments tend to be overestimated at short divergencedistances but reach a tool specific divergence at which they cease toincrease, leading to underestimation at long divergences. Our moststriking finding was that overall alignment accuracy, binding sitealignment accuracy and divergence estimation accuracy vary greatly acrossbranches in a tree and are most accurate for terminal branches connectingsister taxa and least accurate for internal branches connectingsub-alignments. Conclusions: Our results suggest that variation inalignment accuracy can lead to errors in molecular evolutionaryinferences that could be construed as biological variation. Thesefindings have implications for which species to choose for analyses, whatkind of errors would be expected for a given set of species and howmultiple alignment tools and

  19. STUDIES ON FLAME-RETARDANT PC/ABS MULTIPLE-ELEMENT ALLOY

    Institute of Scientific and Technical Information of China (English)

    Ying Quan; Ming-shah Yang; Qing Yah

    2001-01-01

    The preparation technology of flame-retardant PC/ABS alloys was studied in this paper. Using a high-efficiency flame retardant system and by means of multiple-ingredient compatibilizing, PC/ABS alloys with excellent impact strength and flame retardant property were prepared. The experimental results showed that by using PS-g-MAH and SMA as synergistic compatibilizers, the notched Izod impact strength and flammability of PC/ABS alloy obtained in the present work can be up to 175 J/m and UL-94 V0, respectively.

  20. An Efficient Multiple-Dimensional Finite Element Solution for Water Flow in Variably Saturated Soils

    Institute of Scientific and Technical Information of China (English)

    QI Xue-bin; ZHANG Xiao-xian; PANG Hong-bin

    2008-01-01

    Multiple-dimensional water flow in variably saturated soils plays an important role in ecological systems such as irrigation and water uptake by plant roots;its quantitative description is usually based on the Richards' equation.Because of the nonlinearity of the Richards' equation and the complexity of natural soils,most practical simulations rely on numerical solutions with the nonlinearity solved by iterations.The commonly used iterations for solving the nonlinearity are Picard and Newton methods with the former converging at first-order rate and the later at second-order rate.A recent theoretical analysis by the authors,however,revealed that for solving the diffusive flow,the classical Picard method is actually a chord-Newton method,converging at a rate faster than first order;its linear convergence rate is due to the treatment of the gravity term.To improve computational efficiency,a similar chord-Newton method as for solving the diffusive term was proposed to solve the gravity term.Testing examples for one-dimensional flow showed significant improvement.The core of this method is to produce a diagonally dominant matrix in the linear system so as to improve the iteration-toiteration stability and hence the convergence.In this paper,we develop a similar method for multiple-dimensional flow and compare its performance with the classical Picard and Newton methods for water flow in soils characterised by a wide range of van Genuchten parameters.

  1. Finite element simulations of interactions between multiple hydraulic fractures in a poroelastic rock

    DEFF Research Database (Denmark)

    Salimzadeh, Saeed; Usui, Tomoya; Paluszny, Adriana

    2017-01-01

    A fully coupled three-dimensional finite-element model for hydraulic fractures in permeable rocks is presented, and used to investigate the ranges of applicability of the classical analytical solutions that are known to be valid in limiting cases. This model simultaneously accounts for fluid flow...... within the fracture and rock matrix, poroelastic deformation, propagation of the fractures, and fluid leakage into the rock formation. The model is validated against available asymptotic analytical solutions for penny-shaped fractures, in the viscosity-dominated, toughness-dominated, storage......-dominated, and leakoff-dominated regimes. However, for intermediate regimes, these analytical solutions cannot be used to predict the key hydraulic fracturing variables, i.e. injection pressure, fracture aperture, and length. For leakoff-dominated cases in permeable rocks, the asymptotic solutions fail to accurately...

  2. Segmentation of elemental EDS maps by means of multiple clustering combined with phase identification.

    Science.gov (United States)

    Münch, B; Martin, L H J; Leemann, A

    2015-12-01

    An imaging concept is proposed for the phase identification and segmentation of elemental map images from energy dispersive spectroscopy. The procedure starts with presegmentation using common clustering algorithms, continues with automated identification of the chemical compositions, followed by their screening by professional expertise. The ultimate phases are finally clustered by applying a minimum Euclidean distance classifier. The potential, performance and limitations of the approach are presented on energy dispersive spectroscopy maps acquired by a scanning electron microscope and conducted on samples produced from cement clinker, natural rock and hydrated cement mortar. Nevertheless, the technique is suitable for arbitrary types of materials and general devices for energy dispersive spectroscopy acquisition. It is an approach for extending common energy dispersive spectroscopy analysis by means of visual examination and ratio plots towards quantitative rating.

  3. Three-dimension finite-element analyses of multiple electrodes bipolar RF global endometrial ablation

    Science.gov (United States)

    Hu, Tao; Panhao, Tang; Xiao, Jiahua

    2015-03-01

    Radio-frequency ablation (RFA) is a minimally invasive surgical procedure to thermally ablate the targeted diseased tissue. There have been many finite-element method (FEM) studies of cardiac and hepatic RFA, but hardly find any FEM study on endometrial ablation for abnormal uterine bleeding. In this paper, a FEM model was generated to analyze the temperature distribution of bipolar RF global endometrial ablation with three pairs of bipolar electrodes placed at the perimeter of the uterine cavity. COMSOL was utilized to calculate the RF electric fields and temperature fields by numerically solving the bioheat equation in the triangle uterine cavity range. The 55°C isothermal surfaces show the shape of the ablation dimensions (depth and width), which reasonably matched the experimental results.

  4. Phylogenetic consistencies among chondrichthyan and teleost fishes in their bioaccumulation of multiple trace elements from seawater

    Energy Technology Data Exchange (ETDEWEB)

    Jeffree, Ross A., E-mail: R.Jeffree@iaea.org [IAEA Marine Environment Laboratories, 4, Quai Antoine 1er, MC 98000 (Monaco); Oberhansli, Francois; Teyssie, Jean-Louis [IAEA Marine Environment Laboratories, 4, Quai Antoine 1er, MC 98000 (Monaco)

    2010-07-15

    Multi-tracer experiments determined the accumulation from seawater of selected radioactive trace elements (Mn-54, Co-60, Zn-65, Cs-134, Am-241, Cd-109, Ag-110m, Se-75 and Cr-51) by three teleost and three chondrichthyan fish species to test the hypothesis that these phylogenetic groups have different bioaccumulation characteristics, based on previously established contrasts between the carcharhiniform chondrichthyan Scyliorhinus canicula (dogfish) and the pleuronectiform teleost Psetta maxima (turbot). Discriminant function analysis on whole body: water concentration factors (CFs) separated dogfish and turbot in two independent experiments. Classification functions grouped the perciform teleosts, seabream (Sparus aurata) and seabass (Dicentrarchus labrax), with turbot and grouped the chondrichthyans, undulate ray (Raja undulata; Rajiformes) and spotted torpedo (Torpedo marmorata; Torpediniformes), with dogfish, thus supporting our hypothesis. Hierarchical classificatory, multi-dimensional scaling and similarity analyses based on the CFs for the nine radiotracers, also separated all three teleosts (that aggregated lower in the hierarchy) from the three chondrichthyan species. The three chondrichthyans were also more diverse amongst themselves compared to the three teleosts. Particular trace elements that were more important in separating teleosts and chondrichthyans were Cs-134 that was elevated in teleosts and Zn-65 that was elevated in chondrichthyans, these differences being due to their differential rates of uptake rather than loss. Chondrichthyans were also higher in Cr-51, Co-60, Ag-110m and Am-241, whereas teleosts were higher only in Mn-54. These contrasts in bioaccumulation patterns between teleosts and chondrichthyans are interpreted in the context of both proximate causes of underlying differences in physiology and anatomy, as well as the ultimate cause of their evolutionary divergence over more than 500 million years before present (MyBP). Our results

  5. Distribution of arsenic, selenium, and other trace elements in high pyrite Appalachian coals: evidence for multiple episodes of pyrite formation

    Science.gov (United States)

    Diehl, S.F.; Goldhaber, M.B.; Koenig, A.E.; Lowers, H.A.; Ruppert, L.F.

    2012-01-01

    Pennsylvanian coals in the Appalachian Basin host pyrite that is locally enriched in potentially toxic trace elements such as As, Se, Hg, Pb, and Ni. A comparison of pyrite-rich coals from northwestern Alabama, eastern Kentucky, and West Virginia reveals differences in concentrations and mode of occurrence of trace elements in pyrite. Pyrite occurs as framboids, dendrites, or in massive crystalline form in cell lumens or crosscutting veins. Metal concentrations in pyrite vary over all scales, from microscopic to mine to regional, because trace elements are inhomogeneously distributed in the different morphological forms of pyrite, and in the multiple generations of sulfide mineral precipitates. Early diagenetic framboidal pyrite is usually depleted in As, Se, and Hg, and enriched in Pb and Ni, compared to other pyrite forms. In dendritic pyrite, maps of As distribution show a chemical gradient from As-rich centers to As-poor distal branches, whereas Se concentrations are highest at the distal edges of the branches. Massive crystalline pyrite that fills veins is composed of several generations of sulfide minerals. Pyrite in late-stage veins commonly exhibits As-rich growth zones, indicating a probable epigenetic hydrothermal origin. Selenium is concentrated at the distal edges of veins. A positive correlation of As and Se in pyrite veins from Kentucky coals, and of As and Hg in pyrite-filled veins from Alabama coals, suggests coprecipitation of these elements from the same fluid. In the Kentucky coal samples (n = 18), As and Se contents in pyrite-filled veins average 4200 ppm and 200 ppm, respectively. In Alabama coal samples, As in pyrite-filled veins averages 2700 ppm (n = 34), whereas As in pyrite-filled cellular structures averages 6470 ppm (n = 35). In these same Alabama samples, Se averages 80 ppm in pyrite-filled veins, but was below the detection limit in cell structures. In samples of West Virginia massive pyrite, As averages 1700 ppm, and Se averages 270

  6. Sensitive targeted multiple protein quantification based on elemental detection of Quantum Dots

    Energy Technology Data Exchange (ETDEWEB)

    Montoro Bustos, Antonio R.; Garcia-Cortes, Marta [Department of Physical and Analytical Chemistry, University of Oviedo, Julián Clavería 8, Oviedo 33006 (Spain); González-Iglesias, Hector [Fundación de Investigación Oftalmológica, Instituto Oftalmológico Fernandez-Vega, Avenida Doctores Fernández-Vega, 34, Oviedo 33012 (Spain); Ruiz Encinar, Jorge, E-mail: ruizjorge@uniovi.es [Department of Physical and Analytical Chemistry, University of Oviedo, Julián Clavería 8, Oviedo 33006 (Spain); Costa-Fernández, José M. [Department of Physical and Analytical Chemistry, University of Oviedo, Julián Clavería 8, Oviedo 33006 (Spain); Coca-Prados, Miguel [Fundación de Investigación Oftalmológica, Instituto Oftalmológico Fernandez-Vega, Avenida Doctores Fernández-Vega, 34, Oviedo 33012 (Spain); Department of Ophthalmology and Visual Science, Yale University School of Medicine, New Haven, CT 06510 (United States); Sanz-Medel, Alfredo, E-mail: asm@uniovi.es [Department of Physical and Analytical Chemistry, University of Oviedo, Julián Clavería 8, Oviedo 33006 (Spain)

    2015-06-16

    Highlights: • Novel generic platform for multiparametric quantification of proteins. • QDs labeling and ICP-MS detection allow significant analytical signal amplification. • ICP-MS mass balances information provided an internal validation of the immunoassay. • Multiparametric determination of 5 proteins in human serum samples. • ICP-MS reduced matrix effects as compared to other conventional detection techniques. - Abstract: A generic strategy based on the use of CdSe/ZnS Quantum Dots (QDs) as elemental labels for protein quantification, using immunoassays with elemental mass spectrometry (ICP-MS), detection is presented. In this strategy, streptavidin modified QDs (QDs-SA) are bioconjugated to a biotinylated secondary antibody (b-Ab{sub 2}). After a multi-technique characterization of the synthesized generic platform (QDs-SA-b-Ab{sub 2}) it was applied to the sequential quantification of five proteins (transferrin, complement C3, apolipoprotein A1, transthyretin and apolipoprotein A4) at different concentration levels in human serum samples. It is shown how this generic strategy does only require the appropriate unlabeled primary antibody for each protein to be detected. Therefore, it introduces a way out to the need for the cumbersome and specific bioconjugation of the QDs to the corresponding specific recognition antibody for every target analyte (protein). Results obtained were validated with those obtained using UV–vis spectrophotometry and commercial ELISA Kits. As expected, ICP-MS offered one order of magnitude lower DL (0.23 fmol absolute for transferrin) than the classical spectrophotometric detection (3.2 fmol absolute). ICP-MS precision and detection limits, however turned out to be compromised by procedural blanks. The full analytical performance of the ICP-MS-based immunoassay proposed was assessed for detection of transferrin (Tf), present at the low ng mL{sup −1} range in a complex “model” synthetic matrix, where the total protein

  7. Component mode synthesis and large deflection vibration of complex structures. Volume 3: Multiple-mode nonlinear free and forced vibrations of beams using finite element method

    Science.gov (United States)

    Mei, Chuh; Shen, Mo-How

    1987-01-01

    Multiple-mode nonlinear forced vibration of a beam was analyzed by the finite element method. Inplane (longitudinal) displacement and inertia (IDI) are considered in the formulation. By combining the finite element method and nonlinear theory, more realistic models of structural response are obtained more easily and faster.

  8. Multiple sequence elements facilitate Chp Rho GTPase subcellular location, membrane association, and transforming activity.

    Science.gov (United States)

    Chenette, Emily J; Mitin, Natalia Y; Der, Channing J

    2006-07-01

    Cdc42 homologous protein (Chp) is a member of the Rho family of small GTPases and shares significant sequence and functional similarity with Cdc42. However, unlike classical Rho GTPases, we recently found that Chp depends on palmitoylation, rather than prenylation, for association with cellular membranes. Because palmitoylation alone is typically not sufficient to promote membrane association, we evaluated the possibility that other carboxy-terminal residues facilitate Chp subcellular association with membranes. We found that Chp membrane association and transforming activity was dependent on the integrity of a stretch of basic amino acids in the carboxy terminus of Chp and that the basic amino acids were not simply part of a palmitoyl acyltransferase recognition motif. We also determined that the 11 carboxy-terminal residues alone were sufficient to promote Chp plasma and endomembrane association. Interestingly, stimulation with tumor necrosis factor-alpha activated only endomembrane-associated Chp. Finally, we found that Chp membrane association was not disrupted by Rho guanine nucleotide dissociation inhibitory proteins, which are negative regulators of Cdc42 membrane association and biological activity. In summary, the unique carboxy-terminal sequence elements that promote Chp subcellular location and function expand the complexity of mechanisms by which the cellular functions of Rho GTPases are regulated.

  9. Moving finite element method: Applications to general partial differential equations with multiple large gradients

    Energy Technology Data Exchange (ETDEWEB)

    Gelinas, R.J.; Doss, S.K.; Miller, K.

    1981-03-01

    The moving finite element (MFE) method has been reduced to practice in the automatic solution program DYLA for general systems of transient partial differential equations (PDEs) in 1-D. Several test examples are presented which illustrate the unique node movement and systematic control features which are intrinsic in the MFE method. Computational dilemmas of numerical diffusion, Gibbs overshooting and undershooting, zone tangling, and grid remap (or re-connection) aliasing, which occur frequently in conventional PDE methods, are essentially eliminated in the MFE mehtod. Arbitrarily large gradients (or shocks) can be solved with extremely high resolution and accuracy for non-coincident, or even counterdirected, propagating wavefronts. Boundary layers of arbitrarily small dimensions are solved with high accuracy simultaneously with the large-scale structures in reactive and non-reactive fluid calculations. The MFE method requires a small fraction of the grid nodes which are used in conventional PDE solution methods because the nodes migrate continuously and systematically to those positions where they are most needed in order to yield accurate PDE solutions on entire problem domains. Courant--Friedrichs--Lewy time-step limits are exceeded by wide margins (by factors of two to several thousand). Finally, the extension of the MFE method to 2-D is briefly discussed.

  10. Double subgenomic alphaviruses expressing multiple fluorescent proteins using a Rhopalosiphum padi virus internal ribosome entry site element.

    Directory of Open Access Journals (Sweden)

    Michael R Wiley

    Full Text Available Double subgenomic Sindbis virus (dsSINV vectors are widely used for the expression of proteins, peptides, and RNA sequences. These recombinant RNA viruses permit high level expression of a heterologous sequence in a wide range of animals, tissues, and cells. However, the alphavirus genome structure and replication strategy is not readily amenable to the expression of more than one heterologous sequence. The Rhopalosiphum padi virus (RhPV genome contains two internal ribosome entry site (IRES elements that mediate cap-independent translation of the virus nonstructural and structural proteins. Most IRES elements that have been characterized function only in mammalian cells but previous work has shown that the IRES element present in the 5' untranslated region (UTR of the RhPV genome functions efficiently in mammalian, insect, and plant systems. To determine if the 5' RhPV IRES element could be used to express more than one heterologous sequence from a dsSINV vector, RhPV 5' IRES sequences were placed between genes for two different fluorescent marker proteins in the dsSINV, TE/3'2J/mcs. While mammalian and insect cells infected with recombinant viruses containing the RhPV sequences expressed both fluorescent marker proteins, only single marker proteins were routinely observed in cells infected with dsSINV vectors in which the RhPV IRES had been replaced by a luciferase fragment, an antisense RhPV IRES, or no intergenic sequence. Thus, we report development of a versatile tool for the expression of multiple sequences in diverse cell types.

  11. Formaldehyde-Assisted Isolation of Regulatory Elements (FAIRE analysis uncovers broad changes in chromatin structure resulting from hexavalent chromium exposure.

    Directory of Open Access Journals (Sweden)

    Jerald L Ovesen

    Full Text Available The ability of chromatin to switch back and forth from open euchromatin to closed heterochromatin is vital for transcriptional regulation and genomic stability, but its dynamic structure is subject to disruption by exposure to environmental agents such as hexavalent chromium. Cr(VI exposure disrupts chromatin remodeling mechanisms and causes chromosomal damage through formation of free radicals, Cr-DNA adducts, and DNA-Cr-protein cross-links. In addition, acute, high-concentration, and chronic, low-concentration exposures to Cr(VI lead to significantly different transcriptional and genomic stability outcomes. We used mouse hepatoma Hepa-1c1c7 cells to investigate how transcriptional responses to chromium treatment might correlate with structural chromatin changes. We used Formaldehyde-Assisted Isolation of Regulatory Elements (FAIRE analysis coupled with deep sequencing to identify regions of the genome that may switch between open and closed chromatin in response to exposure to varying Cr(VI concentrations. At either Cr(VI concentration, chromatin domains surrounding binding sites for AP-1 transcription factors become significantly open, whereas BACH2 and CTCF binding sites are open solely at the low and high concentrations, respectively. Parallel gene expression profiling using RNA-seq indicates that the structural chromatin changes caused by Cr(VI affect gene expression levels in the target areas that vary depending on Cr(VI concentration, but show no correlation between global changes in the overall transcriptional response and Cr(VI concentration. Our results suggest that FAIRE may be a useful technique to map chromatin elements targeted by DNA damaging agents for which there is no prior knowledge of their specificity, and to identify subsequent transcriptomic changes induced by those agents.

  12. Non-LTR R2 element evolutionary patterns: phylogenetic incongruences, rapid radiation and the maintenance of multiple lineages.

    Directory of Open Access Journals (Sweden)

    Andrea Luchetti

    Full Text Available Retrotransposons of the R2 superclade specifically insert within the 28S ribosomal gene. They have been isolated from a variety of metazoan genomes and were found vertically inherited even if their phylogeny does not always agree with that of the host species. This was explained with the diversification/extinction of paralogous lineages, being proved the absence of horizontal transfer. We here analyze the widest available collection of R2 sequences, either newly isolated from recently sequenced genomes or drawn from public databases, in a phylogenetic framework. Results are congruent with previous analyses, but new important issues emerge. First, the N-terminal end of the R2-B clade protein, so far unknown, presents a new zinc fingers configuration. Second, the phylogenetic pattern is consistent with an ancient, rapid radiation of R2 lineages: being the estimated time of R2 origin (850-600 Million years ago placed just before the metazoan Cambrian explosion, the wide element diversity and the incongruence with the host phylogeny could be attributable to the sudden expansion of available niches represented by host's 28S ribosomal genes. Finally, we detect instances of coexisting multiple R2 lineages showing a non-random phylogenetic pattern, strongly similar to that of the "library" model known for tandem repeats: a collection of R2s were present in the ancestral genome and then differentially activated/repressed in the derived species. Models for activation/repression as well as mechanisms for sequence maintenance are also discussed within this framework.

  13. Effect of Multiple Alloying Elements on Microstructure and Magnetic Properties of Nanocomposite Nd2Fe14B/α-Fe Magnets

    Institute of Scientific and Technical Information of China (English)

    白飞明; 姜忠良; 陈秀云; 马春来; 朱静

    2003-01-01

    Effect of multiple alloying elements (Ga, Nb, Zr, Hf and Pr) on microstructure and magnetic properties of nanocomposite Nd9-xPrxFe86.5-y-z-m-nGayNbzZrmHfnB4.5 (x=0, 2.25; y, z, m, n=0.5, 1.0) ribbons was investigated by a L16(215) orthogonal experiment. The results show that the addition of multiple alloying elements can effectively reduce the grain size of Nd2Fe14B and α-Fe phases and promote amorphous phase to occur at low wheel speed. No inhomogeneous growth of grains was found in annealed ribbons, but a large amount of additives would results in irregularity of Nd2Fe14B and α-Fe grains. On the other hand, addition of multiple alloying elements has complex effects on magnetic properties due to interactions between alloying elements. When the content of Nb is 0.5%, increasing the content of Pr and Ga and decreasing the content of Zr and Hf can improve the magnetic properties effectively. The optimum magnetic properties were obtained in Nd2.25Pr6.75Fe84.5Ga1.5Nb0.5B4.5 ribbons spun at 15 m*s-1 with Jr=1.053 T, iHc=530.9 kA*m-1,(BH)max=124 kJ*m-3.

  14. Multiple Minimum Support-Based Rare Graph Pattern Mining Considering Symmetry Feature-Based Growth Technique and the Differing Importance of Graph Elements

    Directory of Open Access Journals (Sweden)

    Gangin Lee

    2015-06-01

    Full Text Available Frequent graph pattern mining is one of the most interesting areas in data mining, and many researchers have developed a variety of approaches by suggesting efficient, useful mining techniques by integration of fundamental graph mining with other advanced mining works. However, previous graph mining approaches have faced fatal problems that cannot consider important characteristics in the real world because they cannot process both (1 different element importance and (2 multiple minimum support thresholds suitable for each graph element. In other words, graph elements in the real world have not only frequency factors but also their own importance; in addition, various elements composing graphs may require different thresholds according to their characteristics. However, traditional ones do not consider such features. To overcome these issues, we propose a new frequent graph pattern mining method, which can deal with both different element importance and multiple minimum support thresholds. Through the devised algorithm, we can obtain more meaningful graph pattern results with higher importance. We also demonstrate that the proposed algorithm has more outstanding performance compared to previous state-of-the-art approaches in terms of graph pattern generation, runtime, and memory usage.

  15. Simulating the hydraulic stimulation of multiple fractures in an anisotropic stress field applying the discrete element method

    Science.gov (United States)

    Zeeb, Conny; Frühwirt, Thomas; Konietzky, Heinz

    2015-04-01

    Key to a successful exploitation of deep geothermal reservoirs in a petrothermal environment is the hydraulic stimulation of the host rock to increase permeability. The presented research investigates the fracture propagation and interaction during hydraulic stimulation of multiple fractures in a highly anisotropic stress field. The presented work was conducted within the framework of the OPTIRISS project, which is a cooperation of industry partners and universities in Thuringia and Saxony (Federal States of Germany) and was funded by the European Fond for Regional Development. One objective was the design optimization of the subsurface geothermal heat exchanger (SGHE) by means of numerical simulations. The presented simulations were conducted applying 3DEC (Itasca™), a software tool based on the discrete element method. The simulation results indicate that the main direction of fracture propagation is towards lower stresses and thus towards the biosphere. Therefore, barriers might be necessary to limit fracture propagation to the designated geological formation. Moreover, the hydraulic stimulation significantly alters the stresses in the vicinity of newly created fractures. Especially the change of the minimum stress component affects the hydraulic stimulation of subsequent fractures, which are deflected away from the previously stimulated fractures. This fracture deflection can render it impossible to connect all fractures with a second borehole for the later production. The results of continuative simulations indicate that a fracture deflection cannot be avoided completely. Therefore, the stage alignment was modified to minimize fracture deflection by varying (1) the pauses between stages, (2) the spacing's between adjacent stages, and (3) the angle between stimulation borehole and minimum stress component. An optimum SGHE design, which implies that all stimulated fractures are connected to the production borehole, can be achieved by aligning the stimulation

  16. Overcoming Matrix Effects in a Complex Sample: Analysis of Multiple Elements in Multivitamins by Atomic Absorption Spectroscopy

    Science.gov (United States)

    Arnold, Randy J.; Arndt, Brett; Blaser, Emilia; Blosser, Chris; Caulton, Dana; Chung, Won Sog; Fiorenza, Garrett; Heath, Wyatt; Jacobs, Alex; Kahng, Eunice; Koh, Eun; Le, Thao; Mandla, Kyle; McCory, Chelsey; Newman, Laura; Pithadia, Amit; Reckelhoff, Anna; Rheinhardt, Joseph; Skljarevski, Sonja; Stuart, Jordyn; Taylor, Cassie; Thomas, Scott; Tse, Kyle; Wall, Rachel; Warkentien, Chad

    2011-01-01

    A multivitamin tablet and liquid are analyzed for the elements calcium, magnesium, iron, zinc, copper, and manganese using atomic absorption spectrometry. Linear calibration and standard addition are used for all elements except calcium, allowing for an estimate of the matrix effects encountered for this complex sample. Sample preparation using…

  17. Human selenoprotein P and S variant mRNAs with different numbers of SECIS elements and inferences from mutant mice of the roles of multiple SECIS elements.

    Science.gov (United States)

    Wu, Sen; Mariotti, Marco; Santesmasses, Didac; Hill, Kristina E; Baclaocos, Janinah; Aparicio-Prat, Estel; Li, Shuping; Mackrill, John; Wu, Yuanyuan; Howard, Michael T; Capecchi, Mario; Guigó, Roderic; Burk, Raymond F; Atkins, John F

    2016-11-01

    Dynamic redefinition of the 10 UGAs in human and mouse selenoprotein P (Sepp1) mRNAs to specify selenocysteine instead of termination involves two 3' UTR structural elements (SECIS) and is regulated by selenium availability. In addition to the previously known human Sepp1 mRNA poly(A) addition site just 3' of SECIS 2, two further sites were identified with one resulting in 10-25% of the mRNA lacking SECIS 2. To address function, mutant mice were generated with either SECIS 1 or SECIS 2 deleted or with the first UGA substituted with a serine codon. They were fed on either high or selenium-deficient diets. The mutants had very different effects on the proportions of shorter and longer product Sepp1 protein isoforms isolated from plasma, and on viability. Spatially and functionally distinctive effects of the two SECIS elements on UGA decoding were inferred. We also bioinformatically identify two selenoprotein S mRNAs with different 5' sequences predicted to yield products with different N-termini. These results provide insights into SECIS function and mRNA processing in selenoprotein isoform diversity.

  18. Euchromatin islands in large heterochromatin domains are enriched for CTCF binding and differentially DNA-methylated regions

    Directory of Open Access Journals (Sweden)

    Wen Bo

    2012-10-01

    Full Text Available Abstract Background The organization of higher order chromatin is an emerging epigenetic mechanism for understanding development and disease. We and others have previously observed dynamic changes during differentiation and oncogenesis in large heterochromatin domains such as Large Organized Chromatin K (lysine modifications (LOCKs, of histone H3 lysine-9 dimethylation (H3K9me2 or other repressive histone posttranslational modifications. The microstructure of these regions has not previously been explored. Results We analyzed the genome-wide distribution of H3K9me2 in two human pluripotent stem cell lines and three differentiated cells lines. We identified > 2,500 small regions with very low H3K9me2 signals in the body of LOCKs, which were termed as euchromatin islands (EIs. EIs are 6.5-fold enriched for DNase I Hypersensitive Sites and 8-fold enriched for the binding of CTCF, the major organizer of higher-order chromatin. Furthermore, EIs are 2–6 fold enriched for differentially DNA-methylated regions associated with tissue types (T-DMRs, reprogramming (R-DMRs and cancer (C-DMRs. Gene ontology (GO analysis suggests that EI-associated genes are functionally related to organ system development, cell adhesion and cell differentiation. Conclusions We identify the existence of EIs as a finer layer of epigenomic architecture within large heterochromatin domains. Their enrichment for CTCF sites and DNAse hypersensitive sites, as well as association with DMRs, suggest that EIs play an important role in normal epigenomic architecture and its disruption in disease.

  19. POTENTIALLY TOXIC ELEMENT CYCLES AND CHARACTERIZATION OF MULTIPLE SOURCES IN THE IRRIGATION DITCHES FROM THE RAVENNA COASTAL PLAIN THROUGH TRACE ELEMENTS AND ISOTOPE GEOCHEMISTRY

    Directory of Open Access Journals (Sweden)

    Livia Vittori Antisari

    2010-04-01

    Full Text Available While monitoring the physico-chemical characteristics, trace elements and O-H-Sr-B isotopic data were obtained in superficial waters from a number of irrigations canals and ditches in the Ravenna coastal plain, in order to highlight the cycling of potentially toxic elements and the different sources of the solutes. Surveys were conducted during March and July 2008, and considered as representative of the waters in winter and summer, respectively. In summer, the water mass balance in the network is mostly controlled by the ingression of freshwaters from the Canale Emiliano Romagnolo (CER. The O-H isotopic data indicated that, in winter, waters are primarily recharged from Apennine catchments and undergo evaporation to different extents.The boron isotopic signature indicates the important role played by the marine component. A major seawater contribution was evidenced in canals close to the coastline; however, the process controlling the origin of dissolved boron is not solely related to direct mixing with sea water but comprises an additional source probably related to water-soil exchanges and boron of marine origin leaching, owing to the prolonged exposure of alluvial sediments to sea water. An additional boron contribution from the agricultural practice was is also evidenced. Calculation based on the conservative behaviour of chloride ions indicated that in canals and ditches not directly connected with the sea up to the 80% of the Sr budget did not originate from seawater, indicating a source from Al-silicate minerals and supporting the hypothesis of significant soil-water interactions and chemical exchanges.The positive correlation between pH and dissolved oxygen in winter waters is likely to reflect CO2 consumption during algal photosynthesis, favouring the in-situ generation of colloidal particles due to the oxidative precipitation of ferric iron oxy-hydroxides and probably small carbonate particles able to adsorb trace metals on their

  20. The mitochondrial genomes of sponges provide evidence for multiple invasions by Repetitive Hairpin-forming Elements (RHE

    Directory of Open Access Journals (Sweden)

    Lavrov Dennis V

    2009-12-01

    Full Text Available Abstract Background The mitochondrial (mt genomes of sponges possess a variety of features, which appear to be intermediate between those of Eumetazoa and non-metazoan opisthokonts. Among these features is the presence of long intergenic regions, which are common in other eukaryotes, but generally absent in Eumetazoa. Here we analyse poriferan mitochondrial intergenic regions, paying particular attention to repetitive sequences within them. In this context we introduce the mitochondrial genome of Ircinia strobilina (Lamarck, 1816; Demospongiae: Dictyoceratida and compare it with mtDNA of other sponges. Results Mt genomes of dictyoceratid sponges are identical in gene order and content but display major differences in size and organization of intergenic regions. An even higher degree of diversity in the structure of intergenic regions was found among different orders of demosponges. One interesting observation made from such comparisons was of what appears to be recurrent invasions of sponge mitochondrial genomes by repetitive hairpin-forming elements, which cause large genome size differences even among closely related taxa. These repetitive hairpin-forming elements are structurally and compositionally divergent and display a scattered distribution throughout various groups of demosponges. Conclusion Large intergenic regions of poriferan mt genomes are targets for insertions of repetitive hairpin- forming elements, similar to the ones found in non-metazoan opisthokonts. Such elements were likely present in some lineages early in animal mitochondrial genome evolution but were subsequently lost during the reduction of intergenic regions, which occurred in the Eumetazoa lineage after the split of Porifera. Porifera acquired their elements in several independent events. Patterns of their intra-genomic dispersal can be seen in the mt genome of Vaceletia sp.

  1. Heavy-ion radiation induces both activation of multiple endogenous transposable elements and alterations in DNA methylation in rice

    Science.gov (United States)

    Zhang, Meng; Sun, Yeqing; Li, Xishan; Xiaolin, Cui; Li, Xiang

    2012-07-01

    Space radiation represents a complex environmental condition in which several interacting factors such as electron, neutron, proton, heavy-ion are involved, which may provoke stress responses and jeopardize genome integrity. Given the inherent property of epigenetic modifications to respond to intrinsic aswell as external perturbations, it is conceivable that epigenetic markers like DNA methylation and transposition may undergo alterations in response to space radiation. Cytosine DNA methylation plays important roles in maintaining genome stability and controlling gene expression. A predominant means for Transposable elements (TEs) to cause genetic instability is via their transpositional activation. To find the detailed molecular characterization of the nature of genomic changes induced by space radiation, the seeds of rice were exposed to 0.02, 0.2, 1, 2 and 20 Gy dose of ^{12}C heavy-ion radiation, respectively. We found that extensive alteration in both DNA methylation and gene expression occurred in rice plants after different dose of heavy-ion radiation. Here we shown that heavy-ion radiation has induced transposition of mPing and Tos17 in rice, which belong to distinct classes including the miniature inverted terminal repeat TEs (MITEs) and long-terminal repeat (LTR) retrotransposons, respectively. mPing and Tos17 mobility were found to correlate with cytosine methylation alteration detected by MSAP and genetic variation detected by AFLP. The result showed that at least in some cases transposition of TEs was associated with cytosine demethylation within the elements. Our results implicate that the heavy-ion radiation represents a potent mutagenic agent that can cause genomic instabilities by eliciting transposition of endogenous TEs in rice. Keywords: Heavy-ion radiation, DNA methylation, Transposable elements, mPing, Tos17

  2. Alternative Polyadenylation of Human Bocavirus at Its 3′ End Is Regulated by Multiple Elements and Affects Capsid Expression

    Science.gov (United States)

    Hao, Sujuan; Zhang, Junmei; Chen, Zhen; Xu, Huanzhou; Wang, Hanzhong

    2016-01-01

    ABSTRACT Alternative processing of human bocavirus (HBoV) P5 promoter-transcribed RNA is critical for generating the structural and nonstructural protein-encoding mRNA transcripts. The regulatory mechanism by which HBoV RNA transcripts are polyadenylated at proximal [(pA)p] or distal [(pA)d] polyadenylation sites is still unclear. We constructed a recombinant HBoV infectious clone to study the alternative polyadenylation regulation of HBoV. Surprisingly, in addition to the reported distal polyadenylation site, (pA)d, a novel distal polyadenylation site, (pA)d2, which is located in the right-end hairpin (REH), was identified during infectious clone transfection or recombinant virus infection. (pA)d2 does not contain typical hexanucleotide polyadenylation signal, upstream elements (USE), or downstream elements (DSE) according to sequence analysis. Further study showed that HBoV nonstructural protein NS1, REH, and cis elements of (pA)d were necessary and sufficient for efficient polyadenylation at (pA)d2. The distance and sequences between (pA)d and (pA)d2 also played a key role in the regulation of polyadenylation at (pA)d2. Finally, we demonstrated that efficient polyadenylation at (pA)d2 resulted in increased HBoV capsid mRNA transcripts and protein translation. Thus, our study revealed that all the bocaviruses have distal poly(A) signals on the right-end palindromic terminus, and alternative polyadenylation at the HBoV 3′ end regulates its capsid expression. IMPORTANCE The distal polyadenylation site, (pA)d, of HBoV is located about 400 nucleotides (nt) from the right-end palindromic terminus, which is different from those of bovine parvovirus (BPV) and canine minute virus (MVC) in the same genus whose distal polyadenylation is located in the right-end stem-loop structure. A novel polyadenylation site, (pA)d2, was identified in the right-end hairpin of HBoV during infectious clone transfection or recombinant virus infection. Sequence analysis showed that (pA)d2

  3. Development and validation of a statistical shape modeling-based finite element model of the cervical spine under low level multiple direction loading conditions

    Directory of Open Access Journals (Sweden)

    Todd L Bredbenner

    2014-11-01

    Full Text Available Cervical spinal injuries are a significant concern in all trauma injuries. Recent military conflicts have demonstrated the substantial risk of spinal injury for the modern warfighter. Finite element models used to investigate injury mechanisms often fail to examine the effects of variation in geometry or material properties on mechanical behavior. The goals of this study were to model geometric variation for a set of cervical spines, to extend this model to a parametric finite element model, and, as a first step, to validate the parametric model against experimental data for low-loading conditions. Individual finite element models were created using cervical spine (C3-T1 CT data for five male cadavers. Statistical shape modeling was used to generate a parametric finite element model incorporating variability of spine geometry, and soft tissue material property variation was also included. The probabilistic loading response of the parametric model was determined under flexion-extension, axial rotation, and lateral bending and validated by comparison to experimental data. Based on qualitative and quantitative comparison of the experimental loading response and model simulations, we suggest that the model performs adequately under relatively low-level loading conditions in multiple loading directions. In conclusion, statistical shape modeling methods coupled with finite element analyses within a probabilistic framework, along with the ability to statistically validate the overall model performance, provide innovative and important steps towards describing the differences in vertebral morphology, spinal curvature, and variation in material properties. We suggest that these methods, with additional investigation and validation under injurious loading conditions, will lead to understanding and mitigating the risks of injury in the spine and other musculoskeletal structures.

  4. CTCF genomic binding sites in Drosophila and the organisation of the bithorax complex.

    Directory of Open Access Journals (Sweden)

    Eimear E Holohan

    2007-07-01

    Full Text Available Insulator or enhancer-blocking elements are proposed to play an important role in the regulation of transcription by preventing inappropriate enhancer/promoter interaction. The zinc-finger protein CTCF is well studied in vertebrates as an enhancer blocking factor, but Drosophila CTCF has only been characterised recently. To date only one endogenous binding location for CTCF has been identified in the Drosophila genome, the Fab-8 insulator in the Abdominal-B locus in the Bithorax complex (BX-C. We carried out chromatin immunopurification coupled with genomic microarray analysis to identify CTCF binding sites within representative regions of the Drosophila genome, including the 3-Mb Adh region, the BX-C, and the Antennapedia complex. Location of in vivo CTCF binding within these regions enabled us to construct a robust CTCF binding-site consensus sequence. CTCF binding sites identified in the BX-C map precisely to the known insulator elements Mcp, Fab-6, and Fab-8. Other CTCF binding sites correlate with boundaries of regulatory domains allowing us to locate three additional presumptive insulator elements; "Fab-2," "Fab-3," and "Fab-4." With the exception of Fab-7, our data indicate that CTCF is directly associated with all known or predicted insulators in the BX-C, suggesting that the functioning of these insulators involves a common CTCF-dependent mechanism. Comparison of the locations of the CTCF sites with characterised Polycomb target sites and histone modification provides support for the domain model of BX-C regulation.

  5. Low Cost Em Signal Spectral Analysis with Two Element Time Modulated Array System by Multiple Signal Classification Algorithms

    Directory of Open Access Journals (Sweden)

    G. Balagurappa,

    2014-03-01

    Full Text Available Today homeland security is a big matter of concern. The present day wireless technology is available to anti-social elements, who are using this in several undesirable manners. By knowing the direction of the source of electromagnetic waves it becomes possible to locate such anti-social groups and take offensive action. In military applications also finding the direction of the signal source becomes very valuable information. The direction finding systems can achieve this goal. Conventional radio direction finding (RDF systems often use an array of two or more antennas and use either phase-comparison or amplitude-comparison of the received signals to determine direction of arrival information. In both of these techniques directional information is derived by processing array data at the receive signal frequency. In this project an alternative approach to direction finding using the concept of a time-switched array is proposed. The time-switched array system uses simple signal processing techniques to provide a directional main beam and pattern nulls at harmonic frequencies. To determine two dimensional angles is three elements, the system cost has been mostly minimised. we now consider the problem of using our low cost system to detect and estimate the direction of arrival of a desired signal in the presence of array antenna. The proposed scheme is cost effective technique in comparison with the existing schemes. MATLAB/GNU OCTAVE simulation tool will be used for simulation. The simulation results, applications, merits and demerits of proposed approach will be analyzed and will be documented.

  6. Functional Analysis of Multiple Transcription Factor Sites in a Regulatory Element of Human ε-Globin Gene

    Institute of Scientific and Technical Information of China (English)

    Chun-Hui HOU; Jian HUANG; Ruo-Lan QIAN

    2004-01-01

    The developmental control of the human ε-globin gene expression is mediated by transcriptional regulatory elements in the 5' flanking DNA of this gene. A previously identified negative regulatory element (-3028 to -2902 bp, termed ε-NRAII) was analyzed and one putative NF-κB site and two GATA sites locate at -3004 bp, -2975 bp and -2948 bp were characterized. Electrophoresis mobility shift assay (EMSA)showed that the putative NF-κB site was specifically bound by nuclear proteins of K562 cells. Data obtained from transient transfection showed that the expression of reporter gene could be upregulated about 50% or 100% respectively when ε-NRAII was inserted upstream of the SV40 promoter or ε-globin gene proximal promoter (-177 bp to +1 bp), suggesting that ε-NRAII might not be a classic silencer. Mutation in the putative NF-κB site or in the GATA site (at-2975 bp) slightly reduced the expression of reporter gene driven by SV40 promoter or ε-globin gene proximal promoter. However, the mutation of GATA site at -2948 bp remarkably reduced the reporter gene activity driven by SV40 promoter, but not by ε-globin gene proximal promoter. Further mutation analysis showed that the negative effect of mutation in GATA site at -2948 bp on SV40 promoter was not affected by the mutation of the putative NF-κB site, whereas it could be abolished by the mutation of GATA site at -2975 bp. Furthermore, the mutation of both GATA sites could synergistically reduce the reporter gene activity driven by ε-globin gene proximal promoter. Those results suggested that ε-NRAII might function differently on the SV40 promoter and ε-globin gene proximal promoter.

  7. The Solution on Multiple-Media Language Element Teaching Method%谈多媒体汉语教学

    Institute of Scientific and Technical Information of China (English)

    谌梅芳

    2011-01-01

    "用什么技术手段教"已成为语言教学研究的目标之一。文章从语音、词汇、语法、汉字及文化方面探究多媒体汉语教学,找出存在问题,提出积极建议,以利于汉语教学朝着健康可持续方向发展。%By what kind of technical method to teach has become a target of language teaching. The thesis will do some research in pronunciation, vocabulary, grammar, Chinese character, and cultural -effect to find out the problems in multiple-media Chinese language teaching,to put forward some suggestions so as to improv Chinese-language teaching.

  8. Novel genomic rearrangements mediated by multiple genetic elements in Streptococcus pyogenes M23ND confer potential for evolutionary persistence.

    Science.gov (United States)

    Bao, Yun-Juan; Liang, Zhong; Mayfield, Jeffrey A; McShan, William M; Lee, Shaun W; Ploplis, Victoria A; Castellino, Francis J

    2016-08-01

    Symmetric genomic rearrangements around replication axes in genomes are commonly observed in prokaryotic genomes, including Group A Streptococcus (GAS). However, asymmetric rearrangements are rare. Our previous studies showed that the hypervirulent invasive GAS strain, M23ND, containing an inactivated transcriptional regulator system, covRS, exhibits unique extensive asymmetric rearrangements, which reconstructed a genomic structure distinct from other GAS genomes. In the current investigation, we identified the rearrangement events and examined the genetic consequences and evolutionary implications underlying the rearrangements. By comparison with a close phylogenetic relative, M18-MGAS8232, we propose a molecular model wherein a series of asymmetric rearrangements have occurred in M23ND, involving translocations, inversions and integrations mediated by multiple factors, viz., rRNA-comX (factor for late competence), transposons and phage-encoded gene segments. Assessments of the cumulative gene orientations and GC skews reveal that the asymmetric genomic rearrangements did not affect the general genomic integrity of the organism. However, functional distributions reveal re-clustering of a broad set of CovRS-regulated actively transcribed genes, including virulence factors and metabolic genes, to the same leading strand, with high confidence (p-value ~10-10). The re-clustering of the genes suggests a potential selection advantage for the spatial proximity to the transcription complexes, which may contain the global transcriptional regulator, CovRS, and other RNA polymerases. Their proximities allow for efficient transcription of the genes required for growth, virulence and persistence. A new paradigm of survival strategies of GAS strains is provided through multiple genomic rearrangements, while, at the same time, maintaining genomic integrity.

  9. Kinetics of transcription initiation directed by multiple cis-regulatory elements on the glnAp2 promoter.

    Science.gov (United States)

    Wang, Yaolai; Liu, Feng; Wang, Wei

    2016-12-15

    Transcription initiation is orchestrated by dynamic molecular interactions, with kinetic steps difficult to detect. Utilizing a hybrid method, we aim to unravel essential kinetic steps of transcriptional regulation on the glnAp2 promoter, whose regulatory region includes two enhancers (sites I and II) and three low-affinity sequences (sites III-V), to which the transcriptional activator NtrC binds. By structure reconstruction, we analyze all possible organization architectures of the transcription apparatus (TA). The main regulatory mode involves two NtrC hexamers: one at enhancer II transiently associates with site V such that the other at enhancer I can rapidly approach and catalyze the σ(54)-RNA polymerase holoenzyme. We build a kinetic model characterizing essential steps of the TA operation; with the known kinetics of the holoenzyme interacting with DNA, this model enables the kinetics beyond technical detection to be determined by fitting the input-output function of the wild-type promoter. The model further quantitatively reproduces transcriptional activities of various mutated promoters. These results reveal different roles played by two enhancers and interpret why the low-affinity elements conditionally enhance or repress transcription. This work presents an integrated dynamic picture of regulated transcription initiation and suggests an evolutionarily conserved characteristic guaranteeing reliable transcriptional response to regulatory signals. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

  10. Vitamin D Responsive Elements within the HLA-DRB1 Promoter Region in Sardinian Multiple Sclerosis Associated Alleles

    Science.gov (United States)

    Murru, Maria Rita; Corongiu, Daniela; Tranquilli, Stefania; Fadda, Elisabetta; Murru, Raffaele; Schirru, Lucia; Secci, Maria Antonietta; Costa, Gianna; Asunis, Isadora; Cuccu, Stefania; Fenu, Giuseppe; Lorefice, Lorena; Carboni, Nicola; Mura, Gioia; Rosatelli, Maria Cristina; Marrosu, Maria Giovanna

    2012-01-01

    Vitamin D response elements (VDREs) have been found in the promoter region of the MS-associated allele HLA-DRB1*15∶01, suggesting that with low vitamin D availability VDREs are incapable of inducing *15∶01 expression allowing in early life autoreactive T-cells to escape central thymic deletion. The Italian island of Sardinia exhibits a very high frequency of MS and high solar radiation exposure. We test the contribution of VDREs analysing the promoter region of the MS-associated DRB1 *04∶05, *03∶01, *13∶01 and *15∶01 and non-MS-associated *16∶01, *01, *11, *07∶01 alleles in a cohort of Sardinians (44 MS patients and 112 healthy subjects). Sequencing of the DRB1 promoter region revealed a homozygous canonical VDRE in all *15∶01, *16∶01, *11 and in 45/73 *03∶01 and in heterozygous state in 28/73 *03∶01 and all *01 alleles. A new mutated homozygous VDRE was found in all *13∶03, *04∶05 and *07∶01 alleles. Functionality of mutated and canonical VDREs was assessed for its potential to modulate levels of DRB1 gene expression using an in vitro transactivation assay after stimulation with active vitamin D metabolite. Vitamin D failed to increase promoter activity of the *04∶05 and *03∶01 alleles carrying the new mutated VDRE, while the *16∶01 and *03∶01 alleles carrying the canonical VDRE sequence showed significantly increased transcriptional activity. The ability of VDR to bind the mutant VDRE in the DRB1 promoter was evaluated by EMSA. Efficient binding of VDR to the VDRE sequence found in the *16∶01 and in the *15∶01 allele reduced electrophoretic mobility when either an anti-VDR or an anti-RXR monoclonal antibody was added. Conversely, the Sardinian mutated VDRE sample showed very low affinity for the RXR/VDR heterodimer. These data seem to exclude a role of VDREs in the promoter region of the DRB1 gene in susceptibility to MS carried by DRB1* alleles in Sardinian patients. PMID:22848563

  11. Zinc-finger domains of the transcriptional repressor KLF15 bind multiple sites in rhodopsin and IRBP promoters including the CRS-1 and G-rich repressor elements

    Directory of Open Access Journals (Sweden)

    Lai Hong

    2005-06-01

    Full Text Available Abstract Background In the retina, many of the genes that encode components of the visual transduction cascade and retinoid recycling are exclusively expressed in photoreceptor cells and show highly stereotyped temporal and spatial expression patterns. Multiple transcriptional activators of photoreceptor-specific genes have been identified, but little is known about negative regulation of gene expression in the retina. We recently identified KLF15, a member of the Sp/Krüppel-like Factor family of zinc-finger containing transcription factors, as an in vitro repressor of the promoters of the photoreceptor-specific genes rhodopsin and IRBP/Rbp3. To gain further insight into the mechanism of KLF15-mediated regulation of gene expression, we have characterized the binding characteristics and specificity of KLF15's DNA binding domains and defined the KLF15 binding sites in the rhodopsin and IRBP promoters. Results In EMSA and DNAseI footprinting assays, a KLF15-GST fusion protein containing the C-terminal zinc-finger domains (123 amino acids showed zinc-dependent and sequence-specific binding to a 9 bp consensus sequence containing a core CG/TCCCC. Both the bovine rhodopsin and IRBP promoters contained multiple KLF15 binding sites that included the previously identified CRS-1 and G-rich repressor elements. KLF15 binding sites were highly conserved between the bovine, human, chimp and dog rhodopsin promoters, but less conserved in rodents. KLF15 reduced luciferase expression by bRho130-luc (containing 4 KLF15 sites and repressed promoter activation by CRX (cone rod homeobox and/or NRL (neural retina leucine zipper, although the magnitude of the reduction was smaller than previously reported for a longer bRho225-luc (containing 6 KFL15 sites. Conclusion KLF15 binds to multiple 9 bp consensus sites in the Rhodospin and IRBP promoters including the CRS-1 and G-rich repressor elements. Based on the known expression pattern of KLF15 in non

  12. New Insights into Trace Element Partitioning in Amphibole from Multiple Regression Analysis, with Application to the Magma Plumbing System of Mt. Lamington (Papua New Guinea)

    Science.gov (United States)

    Zhang, J.; Humphreys, M.; Cooper, G.; Davidson, J.; Macpherson, C.

    2015-12-01

    We present a new multiple regression (MR) analysis of published amphibole-melt trace element partitioning data, with the aim of retrieving robust relationships between amphibole crystal-chemical compositions and trace element partition coefficients (D). We examined experimental data for calcic amphiboles of kaersutite, pargasite, tschermakite (Tsch), magnesiohornblende (MgHbl) and magnesiohastingsite (MgHst) compositions crystallized from basanitic-rhyolitic melts (n = 150). The MR analysis demonstrates the varying significance of amphibole major element components assigned to different crystallographic sites (T, M1-3, M4, A) as independent variables in controlling D, and it allows us to retrieve statistically significant relationships for REE, Y, Rb, Sr, Pb, Ti, Zr, Nb (n > 25, R2 > 0.6, p-value < 0.05). For example, DLREE are controlled by SiT, M1-3 site components and CaM4, whereas DMREE-HREE are controlled solely by M1-3 site components. Our overall results for the REE are supported by application of the lattice strain model (Blundy & Wood, 1994). A significant advantage of our study over previous work linking D to melt polymerization (e.g. Tiepolo et al., 2007) is the ability to reconstruct melt compositions from in situ amphibole compositional analyses and published D data. We applied our MR analysis to Mt. Lamington (PNG), where Mg-Hst in quenched mafic enclaves are juxtaposed with MgHbl-Tsch phenocrysts from andesitic host lavas. The results indicate that MgHbl-Tsch are crystallized from a cool, rhyolitic melt (800-900±50 ºC, 70-77±5 wt % SiO2; Ridolfi & Renzulli 2012) with lower Rb and Sr and higher Pb, relative to a hot, andesitic-dacitic melt (950-1,000±50 ºC; 60-70±5 wt % SiO2) where MgHst are crystallized. REE and Nb contents are similar in both types of melts despite higher REE and Nb in MgHbl-Tsch. Therefore, the REE compositional disparity between MgHst and MgHbl-Tsch is driven by the difference in the DREE, rather than the melt REE

  13. CTCF cis-regulates trinucleotide repeat instability in an epigenetic manner: a novel basis for mutational hot spot determination.

    Directory of Open Access Journals (Sweden)

    Randell T Libby

    2008-11-01

    Full Text Available At least 25 inherited disorders in humans result from microsatellite repeat expansion. Dramatic variation in repeat instability occurs at different disease loci and between different tissues; however, cis-elements and trans-factors regulating the instability process remain undefined. Genomic fragments from the human spinocerebellar ataxia type 7 (SCA7 locus, containing a highly unstable CAG tract, were previously introduced into mice to localize cis-acting "instability elements," and revealed that genomic context is required for repeat instability. The critical instability-inducing region contained binding sites for CTCF -- a regulatory factor implicated in genomic imprinting, chromatin remodeling, and DNA conformation change. To evaluate the role of CTCF in repeat instability, we derived transgenic mice carrying SCA7 genomic fragments with CTCF binding-site mutations. We found that CTCF binding-site mutation promotes triplet repeat instability both in the germ line and in somatic tissues, and that CpG methylation of CTCF binding sites can further destabilize triplet repeat expansions. As CTCF binding sites are associated with a number of highly unstable repeat loci, our findings suggest a novel basis for demarcation and regulation of mutational hot spots and implicate CTCF in the modulation of genetic repeat instability.

  14. Lentiviral vectors containing mouse Csf1r control elements direct macrophage-restricted expression in multiple species of birds and mammals

    Science.gov (United States)

    Pridans, Clare; Lillico, Simon; Whitelaw, Bruce; Hume, David A

    2014-01-01

    The development of macrophages requires signaling through the lineage-restricted receptor Csf1r. Macrophage-restricted expression of transgenic reporters based upon Csf1r requires the highly conserved Fms-intronic regulatory element (FIRE). We have created a lentiviral construct containing mouse FIRE and promoter. The lentivirus is capable of directing macrophage-restricted reporter gene expression in mouse, rat, human, pig, cow, sheep, and even chicken. Rat bone marrow cells transduced with the lentivirus were capable of differentiating into macrophages expressing the reporter gene in vitro. Macrophage-restricted expression may be desirable for immunization or immune response modulation, and for gene therapy for lysosomal storage diseases and some immunodeficiencies. The small size of the Csf1r transcription control elements will allow the insertion of large “cargo” for applications in gene therapy and vaccine delivery. PMID:26015955

  15. Lentiviral vectors containing mouse Csf1r control elements direct macrophage-restricted expression in multiple species of birds and mammals

    Directory of Open Access Journals (Sweden)

    Clare Pridans

    2014-01-01

    Full Text Available The development of macrophages requires signaling through the lineage-restricted receptor Csf1r. Macrophage-restricted expression of transgenic reporters based upon Csf1r requires the highly conserved Fms-intronic regulatory element (FIRE. We have created a lentiviral construct containing mouse FIRE and promoter. The lentivirus is capable of directing macrophage-restricted reporter gene expression in mouse, rat, human, pig, cow, sheep, and even chicken. Rat bone marrow cells transduced with the lentivirus were capable of differentiating into macrophages expressing the reporter gene in vitro. Macrophage-restricted expression may be desirable for immunization or immune response modulation, and for gene therapy for lysosomal storage diseases and some immunodeficiencies. The small size of the Csf1r transcription control elements will allow the insertion of large “cargo” for applications in gene therapy and vaccine delivery.

  16. Evidence for multiple promoters of the human IL-5 receptor alpha subunit gene: a novel 6-base pair element determines cell-specific promoter function.

    Science.gov (United States)

    Zhang, J; Kuvelkar, R; Cheewatrakoolpong, B; Williams, S; Egan, R W; Billah, M M

    1997-12-01

    In addition to a previously characterized promoter (P1), we now show the existence of a second promoter for the human IL-5Ralpha gene. Initially, a genomic region (P2) 5' upstream of human IL-5Ralpha exon 2 was cloned by an inverted PCR. The transcriptional start site was then mapped to a deoxycytidine (C) residue within P2 by analyzing cellular mRNA with both the 5' rapid amplification of cDNA end-PCR and S1 nuclease protection assays. Transfection of eosinophilic HL-60 cells with reporter gene constructs in which either P1 or P2 was linked to the bacterial chloramphenicol acetyltransferase (CAT) gene resulted in CAT expression; little or no CAT expression occurred in other myeloid and nonmyeloid cell lines. Deletion studies showed that a 66-bp region, ranging from -31 to +35, was sufficient to promote CAT expression in eosinophilic HL-60 cells. Analysis of linker-scanning mutants identified a novel 6-bp element (5' CTAATT 3') spanning -19 to -14 that was essential for P2 promoter activity. In electrophoretic mobility shift assays, a P2 region from -31 to +1 containing the unique 6-bp element, when used as a probe, formed a complex with a protein(s) that was found only in the eosinophilic cell line. This binding activity was lost upon replacement of the 6-bp element with a 6-bp linker, suggesting that this element likely serves as the binding site for an eosinophilic HL-60 cell-specific transcription factor(s). Together, these data suggest an important role for P2 promoter in the regulation of eosinophil-specific expression of the human IL-5 receptor alpha gene.

  17. Effects of pre-existing anti-carrier immunity and antigenic element multiplicity on efficacy of a modular virus-like particle vaccine.

    Science.gov (United States)

    Chuan, Yap P; Rivera-Hernandez, Tania; Wibowo, Nani; Connors, Natalie K; Wu, Yang; Hughes, Fiona K; Lua, Linda H L; Middelberg, Anton P J

    2013-09-01

    Modularization of a peptide antigen for presentation on a microbially synthesized murine polyomavirus (MuPyV) virus-like particle (VLP) offers a new alternative for rapid and low-cost vaccine delivery at a global scale. In this approach, heterologous modules containing peptide antigenic elements are fused to and displayed on the VLP carrier, allowing enhancement of peptide immunogenicity via ordered and densely repeated presentation of the modules. This study addresses two key engineering questions pertaining to this platform, exploring the effects of (i) pre-existing carrier-specific immunity on modular VLP vaccine effectiveness and (ii) increase in the antigenic element number per VLP on peptide-specific immune response. These effects were studied in a mouse model and with modular MuPyV VLPs presenting a group A streptococcus (GAS) peptide antigen, J8i. The data presented here demonstrate that immunization with a modular VLP could induce high levels of J8i-specific antibodies despite a strong pre-existing anti-carrier immune response. Doubling of the J8i antigenic element number per VLP did not enhance J8i immunogenicity at a constant peptide dose. However, the strategy, when used in conjunction with increased VLP dose, could effectively increase the peptide dose up to 10-fold, leading to a significantly higher J8i-specific antibody titer. This study further supports feasibility of the MuPyV modular VLP vaccine platform by showing that, in the absence of adjuvant, modularized GAS antigenic peptide at a dose as low as 150 ng was sufficient to raise a high level of peptide-specific IgGs indicative of bactericidal activity.

  18. Assessment of multiple exposure to chemical elements and health risks among residents near Huodehong lead-zinc mining area in Yunnan, Southwest China.

    Science.gov (United States)

    Wang, Yirun; Wang, Ruming; Fan, Liyun; Chen, Tiantian; Bai, Yahong; Yu, Qianru; Liu, Ying

    2017-05-01

    The contents of chemical elements (Cd, Cr, Cu, Pb and Zn) in 11 kinds of crop/vegetables and soils around the Huodehong lead-zinc mining area in Yunnan, Southwest China were determined by using inductive coupled plasma emission spectrometry (ICP-MS). Results showed that element contents in soils decreased in the order of Zn > Pb > Cr > Cu > Cd. The high geo-accumulation indexes (Igeo) showed that cultivated soils near mine were practically polluted by Cd, Pb and Zn. The contents of Cd, Cr and Pb in crop/vegetables samples were significantly higher than the maximum permissible standard set by China. The potential health risk assessments among local residents were evaluated by the hazard index (HI), the total carcinogenic risk (TCR), the target hazard quotient (THQ) and carcinogenic risk (CR), respectively. The results showed that diet was the dominant exposure pathway. The results of HI for adult and child were 6.21 and 6.08, respectively. TCR values of Cr and Cd were more than 10(-4). The THQ decreased in the following order: Cd > Pb > Cu > Zn > Cr. Among all kinds of crop/vegetables, leafy-vegetables were the major source of Cd and Pb exposure, root-vegetable were the important factors for Cu and Zn exposure, but tuber-vegetable were the factors for Cr exposure. The contents of Cd and Pb in human scalp hairs near Huodehong mine were higher than that in S20km area. Females possessed a higher risk for Cd, Cr, Cu and Pb exposure than males in study area. Significant differences between ages were found for Cd, Cu and Pb (p chemical elements risk to human health. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. WOLF: a Research Platform to Write NFC Secure Applications on Top of Multiple Secure Elements (With an Original SQL-Like Interface

    Directory of Open Access Journals (Sweden)

    Anne Marie Lesas

    2014-08-01

    Full Text Available This article presents the WOLF (Wallet Open Library Framework platform which supports an original interface for NFC developers called “SE-QL”. SE-QL is a SQL-like interface which eases and optimizes NFC secure application development in making the heterogeneity of the Secure Element (SE transparent. SE implementation could be “embedded” (eSE in the mobile device, or inside the SIM Card (UICC, or “on-host” software-based, or in the Cloud (e.g. through HCE; every SE implementation has its own interface(s making NFC secure-application development extremely cumbersome and complex. Proposed SE-QL solves this problem. This article demonstrates the feasibility and attractiveness of our approach based upon an original high-level API.

  20. Adaptation of genetically monomorphic bacteria: evolution of copper resistance through multiple horizontal gene transfers of complex and versatile mobile genetic elements.

    Science.gov (United States)

    Richard, D; Ravigné, V; Rieux, A; Facon, B; Boyer, C; Boyer, K; Grygiel, P; Javegny, S; Terville, M; Canteros, B I; Robène, I; Vernière, C; Chabirand, A; Pruvost, O; Lefeuvre, P

    2017-04-01

    Copper-based antimicrobial compounds are widely used to control plant bacterial pathogens. Pathogens have adapted in response to this selective pressure. Xanthomonas citri pv. citri, a major citrus pathogen causing Asiatic citrus canker, was first reported to carry plasmid-encoded copper resistance in Argentina. This phenotype was conferred by the copLAB gene system. The emergence of resistant strains has since been reported in Réunion and Martinique. Using microsatellite-based genotyping and copLAB PCR, we demonstrated that the genetic structure of the copper-resistant strains from these three regions was made up of two distant clusters and varied for the detection of copLAB amplicons. In order to investigate this pattern more closely, we sequenced six copper-resistant X. citri pv. citri strains from Argentina, Martinique and Réunion, together with reference copper-resistant Xanthomonas and Stenotrophomonas strains using long-read sequencing technology. Genes involved in copper resistance were found to be strain dependent with the novel identification in X. citri pv. citri of copABCD and a cus heavy metal efflux resistance-nodulation-division system. The genes providing the adaptive trait were part of a mobile genetic element similar to Tn3-like transposons and included in a conjugative plasmid. This indicates the system's great versatility. The mining of all available bacterial genomes suggested that, within the bacterial community, the spread of copper resistance associated with mobile elements and their plasmid environments was primarily restricted to the Xanthomonadaceae family. © 2017 John Wiley & Sons Ltd.

  1. Simultaneous Determination of Multiple Trace Elements in Ligusticum Chuanxiong by ICP-MS%电感耦合等离子体质谱法测定川芎中多种微量元素

    Institute of Scientific and Technical Information of China (English)

    罗雪芹; 杨军; 秦秀蓉

    2015-01-01

    目的:测定川芎药材中多种微量元素,为其开发利用提供参考依据。方法采用微波消解法处理样品,应用电感耦合等离子体质谱( ICP-MS )法同时测定不同地区川芎药材中多种微量元素。结果在设定的测试条件下,各元素标准曲线的线性关系良好,相关系数大于0.999,加标回收率为96.31%~104.22%,RSD为0.5%~4.6%。测定结果显示,川芎中含丰富的Mg元素,同时Fe,Mn,Zn元素含量也相对较高,有害元素除Cd含量偏高,其余含量都极低。结论该法操作简便、快速、检测限低、灵敏度高、准确度好,可用于川芎中多种元素的同时测定,其试验结果可为进一步开发利用川芎资源及质量控制提供参考。%Objective To determine the content of multiple trace elements in Ligusticum chuanxiong so as to provide the basis for its development and application. Methods The sample was treated by the microwave digestion method. The above multiple trace elements in Ligusticum chuanxiong medicinal material produced by different regions were detected by the inductively coupled plasma mass spec-trometry ( ICP-MS ) . Results Under the given analytical conditions, the standard curve of each element had good linearity, the correlative coeficients were above 0. 999, the sample recovery rate was 96. 31% -104. 22%, and RSD was 0. 5% -4. 6%. The detection results showed that Ligusticum chuanxiong has rich Mg element, relatively high content of Fe, Mn and Zn element and very low content of harmful elements except the Cd content on the high side. Conclusion This method used in this study is simple and rapid with low detection limit, high sensitivity and good accuracy, and can be used for the simultaneous determination of multiple trace elements in Ligusticum chuanxiong and this experimental results can provide reference for further development and utilization of Ligusticum chuanx-iong resource and its quality control.

  2. Toxic Elements

    DEFF Research Database (Denmark)

    Hajeb, Parvaneh; Shakibazadeh, Shahram; Sloth, Jens Jørgen

    2016-01-01

    Food is considered the main source of toxic element (arsenic, cadmium, lead, and mercury) exposure to humans, and they can cause major public health effects. In this chapter, we discuss the most important sources for toxic element in food and the foodstuffs which are significant contributors...... to human exposure. The occurrence of each element in food classes from different regions is presented. Some of the current toxicological risk assessments on toxic elements, the human health effect of each toxic element, and their contents in the food legislations are presented. An overview of analytical...... techniques and challenges for determination of toxic elements in food is also given....

  3. 多加强肋胀形可行性补充条件及有限元数值模拟%Feasibility supplementary criterion and finite element numerical simulation of bulging for multiple reinforcement ribs

    Institute of Scientific and Technical Information of China (English)

    管爱枝; 施于庆

    2013-01-01

    Multiple reinforcement ribs of metal shell parts should be made by one bulging procedure,while the current bulging feasibility criterion used for single reinforcement rib can not be directly used to determine whether multiple reinforcement ribs can be successfully bulged for the first time.After the regions between the positive reinforcement ribs were regarded as reverse reinforcement ribs,a feasibility supplementary criterion of bulging for multiple reinforcement ribs was proposed based on the supposition that the maximum bulging increment of reverse ribs should be smaller than that of positive ribs.Three kinds of metal shell parts were modeled,with single reinforcement rib,multiple ribs with small center distance and multiple ribs with large center distance,respectively.And the numerical simulation of the bulging process for those parts was carried out through ANSYS/LS-DYNA module based on finite element method.The validity of the feasibility supplementary criterion of bulging for multiple reinforcement ribs was verified by the results of thickness thinning rate distribution and forming limit diagram.The center distance between adjacent ribs is the key factor for determining the feasibility of once bulging.%金属板壳件的多加强肋需一次成形,而现有单加强肋胀形可行性条件不能直接用来判断多加强肋能否一次成功胀形.将多加强肋间区域视为反向加强肋,在其许用变形程度比正向加强肋小的前提下,提出了多加强肋胀形可行性的补充条件.建立了单加强肋、近距分布及远距分布多加强肋的3种板壳件模型,运用ANSYS/LS-DYNA完成了其胀形成形的有限元数值模拟.厚度减薄率和成形极限图的模拟结果验证了多加强肋胀形可行性补充条件的有效性.多加强肋之间的距离是决定其能否一次胀形成形的关键因素.

  4. An element

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, K.; Iidzima, K.

    1983-03-30

    An anode of a light metal is used in the element, along with an electrolyte which consists of an ether solvent and an ionogenic additive in the form of a salt of dithiocarbamic acid. The element has good discharge characteristics.

  5. Efeito do tipo de elemento de rosca na degradação de polipropileno durante múltiplas extrusões Effect of screw element on the polypropylene degradation during multiple extrusions

    Directory of Open Access Journals (Sweden)

    Ana Clélia Babetto

    2000-06-01

    Full Text Available A configuração da rosca de uma extrusora de dupla rosca modular pode ser projetada com vários tipos de elementos de condução e mistura, produzindo diferentes níveis de degradação no polímero fundido. Neste trabalho determinou-se o nível de degradação do polipropileno durante múltiplas extrusões em várias configurações de rosca, através de cromatografia por exclusão de tamanho e espectroscopia de infravermelho. Houve decréscimo do peso molecular e estreitamento da sua distribuição em função do número de extrusões e do aumento da agressividade da rosca, assim como, aumento da concentração de carbonilas e insaturações na cadeia polimérica. O elemento de mistura EM90 causou o maior nível de degradação e a adição de elementos de condução esquerdos ECE reduziram o nível de degradação.The screw configuration of a double screw extruder can be designed to contain kneading and conveying elements inducing different levels of degradation in the polymer melt. In this work the level of degradation in polypropylene have been measured after multiple extrusions for various screw configurations using Size Exclusion Chromatography and Infra-Red Spectroscopy. The average molecular weight and the polydispersity are reduced and the carbonyl and unsaturation indices increase as the number of extrusions and the agressiveness of the screw increase. The kneading element with 90 degrees caused the greater level of degradation and the addition of left hand elements have reduced the level of degradation.

  6. Element Distribution and Multiplicity of Heavy Fragments

    CERN Multimedia

    2002-01-01

    This experiment will measure the energy and angular distribution of heavy fragments produced in the reactions of |1|2C on several targets between |2|7Al and |2|3|8U at 86~MeV/u. The systematic investigation of a highly excited interaction region (fireball) by means of a clean N and Z identification of heavy tar fragments, may result in a better understanding of temperature concept and of the degree of equilibration of the local interaction region with respect to the total system. For this investigation a large-area position sensitive ionization chamber of 50~msr solid angle in conjunction with a time-of-flight telescope consisting of parallel-plate detectors will be used. \\\\ \\\\ In order to get information on the transverse momentum transfer and the inelasticity of the collision, the energy of the PROJECTILE-FRAGMENTS will be measured at forward angles with a plastic scintillator hodoscope. In addition to this inclusive measurement correlations between heavy fragments will be investigated by means of three pos...

  7. Transcriptional heterogeneity in the lactase gene within cell-type is linked to the epigenome

    Science.gov (United States)

    Oh, Edward; Jeremian, Richie; Oh, Gabriel; Groot, Daniel; Susic, Miki; Lee, KwangHo; Foy, Kelly; Laird, Peter W.; Petronis, Arturas; Labrie, Viviane

    2017-01-01

    Transcriptional variation in histologically- and genetically- identical cells is a widespread phenomenon in tissues, yet the processes conferring this heterogeneity are not well understood. To identify contributing factors, we analyzed epigenetic profiles associated with the in vivo transcriptional gradient of the mouse lactase gene (Lct), which occurs in enterocytes along the proximal-to-distal axis of the small intestine. We found that epigenetic signatures at enhancer and promoter elements aligns with transcriptional variation of Lct in enterocytes. Age and phenotype-specific environmental cues (lactose exposure after weaning) induced changes to epigenetic modifications and CTCF binding at select regulatory elements, which corresponded to the alterations in the intestinal Lct mRNA gradient. Thus, epigenetic modifications in combination with CTCF binding at regulatory elements account for the transcriptional gradient in Lct in cells of the same type. Epigenetic divergence within enterocytes may contribute to the functional specialization of intestinal subregions. PMID:28139744

  8. Contributions to multiple element speciation in vegetable plants: Studies on the type of bonding of numerous elements, particularly zinc and cadmium; Beitraege zur Multielement-Speziation in pflanzlichen Lebensmitteln: Studien zur Bindungsform zahlreicher Elemente unter besonderer Beruecksichtigung von Zink und Cadmium

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, K.

    1997-03-01

    In the first part of the study, the total contents and the solubility characteristics of Zn, Cd, Fe, Mn, Cu, Ca, Sr, K and Rb in 26 different vegetable plants, the majority of them commercially available, are reported, obtained by post-decomposition analyses. The data are given for avocados, bananas, cauliflower, chicory, Chinese cabbage, dill, ice lettuce (two specimens), endive, field salad, cucumbers, kohlrabi, lettuce, chard beet, carrots, peppers, leek, radish, red cabbage, loose leaved lettuce, celery (two specimens), spinach, topinambur, white cabbage, and parsley. Cell decomposition was done by treatment of the plant material with an electric dispersing apparatus (Ultra-Turrax) in buffer solution (liquid shearing). The homogenates were separated into supernatants (cytosoles)and pellets by means of centrifugation. Cell decomposition of the plants by crushing with quartz sand after lyophilization (solid shearing) required much more technical effort and for some elements created problems with the blind values. At least 50% on the average of the elements Zn, Cd, Rb, and K could be transferred to the solutions by the dispersing treatment with Ultra-Turrax. In many cases, the cytosole-borne detectable contents of these 5 elements were above 70%. The solubility of Zn and Cd was more strongly dependent on the plant species than that of Cu, Rb, and K. All five elements thus can be analysed by conventional methods for further enhanced speciation. Mn, Ca, and especially Fe and Sr for the most part were found to be bonded to solid cell constituents. However, the solubility characteristics of Ca and Mn and Sr in particular was very homogeneous. In some plants, the contents of Mn and Sr in the cytosoles was approx. 90%, so that comprehensive speciation of these elements is possible. (orig./AJ) [Deutsch] Im ersten Teil dieser Studie wurden die Gesamtgehalte und das Loeslichkeitsverhalten von Zn, Cd, Fe, Mn, Cu, Ca, Sr, K und Rb in 26 verschiedenen - ueberwiegend

  9. Multiple Pregnancy

    Science.gov (United States)

    ... Education & Events Advocacy For Patients About ACOG Multiple Pregnancy Home For Patients Search FAQs Multiple Pregnancy Page ... Multiple Pregnancy FAQ188, July 2015 PDF Format Multiple Pregnancy Pregnancy How does multiple pregnancy occur? What are ...

  10. Multiple sclerosis; Multiple Sklerose

    Energy Technology Data Exchange (ETDEWEB)

    Grunwald, I.Q.; Kuehn, A.L.; Backens, M.; Papanagiotou, P. [Universitaet des Saarlandes, Abteilung fuer Diagnostische und Interventionelle Neuroradiologie, Radiologische Klinik, Homburg/Saar (Germany); Shariat, K. [Universitaet des Saarlandes, Klinik fuer Neurochirurgie, Homburg/Saar (Germany); Kostopoulos, P. [Universitaet des Saarlandes, Klinik fuer Neurologie, Homburg/Saar (Germany)

    2008-06-15

    Multiple sclerosis is the most common chronic inflammatory disease of myelin with interspersed lesions in the white matter of the central nervous system. Magnetic resonance imaging (MRI) plays a key role in the diagnosis and monitoring of white matter diseases. This article focuses on key findings in multiple sclerosis as detected by MRI. (orig.) [German] Die Multiple Sklerose (MS) ist die haeufigste chronisch-entzuendliche Erkrankung des Myelins mit eingesprengten Laesionen im Bereich der weissen Substanz des zentralen Nervensystems. Die Magnetresonanztomographie (MRT) hat bei der Diagnosestellung und Verlaufskontrolle eine Schluesselrolle. Dieser Artikel befasst sich mit Hauptcharakteristika der MR-Bildbebung. (orig.)

  11. Elements of linear space

    CERN Document Server

    Amir-Moez, A R; Sneddon, I N

    1962-01-01

    Elements of Linear Space is a detailed treatment of the elements of linear spaces, including real spaces with no more than three dimensions and complex n-dimensional spaces. The geometry of conic sections and quadric surfaces is considered, along with algebraic structures, especially vector spaces and transformations. Problems drawn from various branches of geometry are given.Comprised of 12 chapters, this volume begins with an introduction to real Euclidean space, followed by a discussion on linear transformations and matrices. The addition and multiplication of transformations and matrices a

  12. Trace elements in dialysis.

    Science.gov (United States)

    Filler, Guido; Felder, Sarah

    2014-08-01

    In end-stage chronic kidney disease (CKD), pediatric nephrologists must consider the homeostasis of the multiple water-soluble ions that are influenced by renal replacement therapy (RRT). While certain ions such as potassium and calcium are closely monitored, little is known about the handling of trace elements in pediatric dialysis. RRT may lead to accumulation of toxic trace elements, either due to insufficient elimination or due to contamination, or to excessive removal of essential trace elements. However, trace elements are not routinely monitored in dialysis patients and no mechanism for these deficits or toxicities has been established. This review summarizes the handling of trace elements, with particular attention to pediatric data. The best data describe lead and indicate that there is a higher prevalence of elevated lead (Pb, atomic number 82) levels in children on RRT when compared to adults. Lead is particularly toxic in neurodevelopment and lead levels should therefore be monitored. Monitoring of zinc (Zn, atomic number 30) and selenium (Se, atomic number 34) may be indicated in the monitoring of all pediatric dialysis patients to reduce morbidity from deficiency. Prospective studies evaluating the impact of abnormal trace elements and the possible therapeutic value of intervention are required.

  13. PELTIER ELEMENTS

    CERN Document Server

    Tani, Laurits

    2015-01-01

    To control Peltier elements, temperature controller was used. I used TEC-1091 that was manufactured my Meerstetter Engineering. To gain control with the temperature controller, software had to be intalled on a controlling PC. There were different modes to control the Peltier: Tempererature controller to control temperature, Static current/voltage to control voltage and current and LIVE ON/OFF to auto-tune the controller respectively to the system. Also, since near the collision pipe there is much radiation, radiation-proof Peltier elements have to be used. To gain the best results, I had to find the most efficient Peltier elements and try to get their cold side to -40 degrees Celsius.

  14. Element Research.

    Science.gov (United States)

    Herald, Christine

    2001-01-01

    Describes a research assignment for 8th grade students on the elements of the periodic table. Students use web-based resources and a chemistry handbook to gather information, construct concept maps, and present the findings to the full class using the mode of their choice: a humorous story, a slideshow or gameboard, a brochure, a song, or skit.…

  15. Elements of probability theory

    CERN Document Server

    Rumshiskii, L Z

    1965-01-01

    Elements of Probability Theory presents the methods of the theory of probability. This book is divided into seven chapters that discuss the general rule for the multiplication of probabilities, the fundamental properties of the subject matter, and the classical definition of probability. The introductory chapters deal with the functions of random variables; continuous random variables; numerical characteristics of probability distributions; center of the probability distribution of a random variable; definition of the law of large numbers; stability of the sample mean and the method of moments

  16. Gamification Elements for Learning Applications

    Directory of Open Access Journals (Sweden)

    Firas Layth Khaleel

    2016-12-01

    Full Text Available Gamification technique is getting popular to be implemented in learning or training application. It is referred to the use of game elements or game thinking in a non-game context in order to increase engagement between students and learning application. Since there are many elements of games that are identified from previous works, this study focuses on game elements from Gamification technique that positively affect learning when applied to a learning application. Therefore, the objectives of this research are to identify game elements that can be gamified in a learning application; and to verify those elements by multiple users (gamers, students, and experts. Suitable game elements are identified through literature reviews. Two approaches are used to verify these elements; interview experts and administer a survey to gamers and students. The finding of this study suggests the use of a group of game elements with three aims, (1 increase the level of fun and entertainment; (2 motivate students to challenge each other; and (3 improve gaming and learning skills. In a further study, these elements will be implemented in a learning application and its effectiveness shall be tested.

  17. Multiple Sclerosis

    Science.gov (United States)

    Multiple sclerosis (MS) is a nervous system disease that affects your brain and spinal cord. It damages the ... attacks healthy cells in your body by mistake. Multiple sclerosis affects women more than men. It often begins ...

  18. Multiple Myeloma

    Science.gov (United States)

    Multiple myeloma is a cancer that begins in plasma cells, a type of white blood cell. These cells ... bones. No one knows the exact causes of multiple myeloma, but it is more common in older people ...

  19. Comix, a New Matrix Element Generator

    Energy Technology Data Exchange (ETDEWEB)

    Gleisberg, Tanju; /SLAC; Hoche, Stefan; /Durham U., IPPP

    2008-09-03

    We present a new tree-level matrix element generator, based on the color dressed Berends-Giele recursive relations. We discuss two new algorithms for phase space integration, dedicated to be used with large multiplicities and color sampling.

  20. Sensing Device with Whisker Elements

    Science.gov (United States)

    Hartmann, Mitra J. (Inventor); Solomon, Joseph H. (Inventor)

    2013-01-01

    A sensing device includes an elongated whisker element having a flexible cantilever region and a base region where a change in moment or curvature is generated by bending of the cantilever region when it contacts an object. One or more sensor elements cooperatively associated with the whisker element provide one or more output signals that is/are representative of two orthogonal components of change in moment or curvature at the whisker base region to permit determination of object distance, fluid velocity profile, or object contour (shape) with accounting for lateral slip of the whisker element and frictional characteristics of the object. Multiple sensing devices can be arranged in arrays in a manner to sense object contour without or with adjustment for lateral slip.

  1. Multiplicity Counting

    Energy Technology Data Exchange (ETDEWEB)

    Geist, William H. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-01

    This set of slides begins by giving background and a review of neutron counting; three attributes of a verification item are discussed: 240Pueff mass; α, the ratio of (α,n) neutrons to spontaneous fission neutrons; and leakage multiplication. It then takes up neutron detector systems – theory & concepts (coincidence counting, moderation, die-away time); detector systems – some important details (deadtime, corrections); introduction to multiplicity counting; multiplicity electronics and example distributions; singles, doubles, and triples from measured multiplicity distributions; and the point model: multiplicity mathematics.

  2. Residuation Properties and Weakly Primary Elements in Lattice Modules

    Directory of Open Access Journals (Sweden)

    C. S. Manjarekar

    2014-01-01

    Full Text Available We obtain some elementary residuation properties in lattice modules and obtain a relation between a weakly primary element in a lattice module M and weakly prime element of a multiplicative lattice L.

  3. Screening of TiO2 and Au nanoparticles in cosmetics and determination of elemental impurities by multiple techniques (DLS, SP-ICP-MS, ICP-MS and ICP-OES).

    Science.gov (United States)

    de la Calle, Inmaculada; Menta, Mathieu; Klein, Marlène; Séby, Fabienne

    2017-08-15

    Cosmetics are part of the daily life of most of the people. Thus, a complete characterization of the products we applied in our skin is necessary. In this work, an analytical investigation of a wide variety of cosmetics from the point of view of total element content and metallic nanoparticles (NPs) has been performed. Firstly, we analyzed the total element content by ICP-MS and ICP-OES after acid digestion as an assessment of the presence of metal impurities. Prohibited elements in cosmetics, according to the European Commission regulation No 1223/2009, were not detected, and only elements mentioned in the label were found (e.g. Al, Fe, Ti and Si). Secondly, a screening of the presence of NPs has been performed by Dynamic Light Scattering (DLS) and Single Particle Inductively-Coupled Plasma Mass Spectrometry (SP-ICP-MS). Two sample preparation procedures were applied. The first protocol consisted in the preparation of suspensions in 0.1% w/v SDS and the second based on defatting with hexane followed by resuspension in water. DLS was employed as a routine method for a fast analysis of NPs, but this technique showed limitations due to the lack of specificity. SP-ICP-MS analyses were then performed, first as a screening technique to evaluate the presence of TiO2 and Au NPs in cosmetics suspensions prepared in SDS; and second, when a positive answer was obtained about the presence of NPs from the screening, SP-ICP-MS was used for particle size determination. Results showed that only TiO2 NPs were present in two sunscreens, one anti-wrinkle day cream, one lip balm protector labeled as 'nano' and in one brand of toothpaste not labeled as 'nano'. Sizes obtained for both sample preparations were compared and ranged from 30 to 120nm in most of the samples. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Multiple Gliomas

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Multiple gliomas are well-recognized but uncommon tumors. The incidence of multiple gliomas according to some reports ranges from 0.5% to 20% of all gliomas diagnosed. Multiple gliomas can be divided into two categories. One is by location of the lesions (multifocal and multicentric). The second type is by the time of the lesions occur (synchronous and metachronous). The lesions generally show hypo, or isodensity on CT; a hypo- or isointense signal on T1-weighted images, and a hyperintense signal on T2-weighted images. Glioblastoma is the most frequent histotype. The prognosis of multiple gliomas remains unfavorable. The treatment of multiple gliomas includes surgery, radiotherapy and chemotherapy. Distinction between multicentric and multifocal gliomas is difficult. This report reviews in detail the aspects of multiple gliomas mentioned above.

  5. Increased intragenic IGF2 methylation is associated with repression of insulator activity and elevated expression in serous ovarian carcinoma

    Directory of Open Access Journals (Sweden)

    Zhiqing eHuang

    2013-05-01

    Full Text Available Overexpression of insulin-like growth factor-II (IGF2 is a prominent characteristic of many epithelial ovarian malignancies. IGF2 imprinting and transcription are regulated in part through DNA methylation, which in turn regulates binding of the insulator protein, CTCF, within the IGF2/H19 imprint center. We have shown that IGF2 overexpression in ovarian cancer is associated with hypermethylation of CTCF binding sites within the IGF2/H19 imprint center. The aim of this study was to investigate the methylation and binding capacity of a novel putative CTCF binding motif located intragenic to IGF2 and determine how this relates to IGF2 expression. In 35 primary serous epithelial ovarian cancer specimens, methylation of two CpGs, including one within the core binding motif and another adjacent to this motif, was higher in the 18 cancers with elevated IGF2 expression versus 10 with low expression (avg. 68.2% vs. 38.5%; p<0.0001. We also found that the CpG site within the CTCF binding motif is hypermethylated in male gametes (>92%; avg. 93.2%; N=16. We confirmed binding of CTCF to this region in ovarian cancer cells, as well as the paralog of CTCF, BORIS, which is frequently overexpressed in cancers. The unmethylated CTCF binding motif has insulator activity in cells that express CTCF or BORIS, but not in cells that express both CTCF and BORIS. These intragenic CpG dinucleotides comprise a novel paternal germline imprint mark and are located in a binding motif for the insulator protein CTCF. Methylation of the CpG dinucleotides is positively correlated with IGF2 transcription, supporting that increased methylation represses insulator function. These combined results suggest that methylation and CTCF binding at this region play important roles in regulating the level of IGF2 transcription. Our data have revealed a novel epigenetic regulatory element within the IGF2/H19 imprinted domain that is highly relevant to aberrant IGF2 expression in ovarian

  6. Element-Based Computational Model

    Directory of Open Access Journals (Sweden)

    Conrad Mueller

    2012-02-01

    Full Text Available A variation on the data-flow model is proposed to use for developing parallel architectures. While the model is a data driven model it has significant differences to the data-flow model. The proposed model has an evaluation cycleof processing elements (encapsulated data that is similar to the instruction cycle of the von Neumann model. The elements contain the information required to process them. The model is inherently parallel. An emulation of the model has been implemented. The objective of this paper is to motivate support for taking the research further. Using matrix multiplication as a case study, the element/data-flow based model is compared with the instruction-based model. This is done using complexity analysis followed by empirical testing to verify this analysis. The positive results are given as motivation for the research to be taken to the next stage - that is, implementing the model using FPGAs.

  7. Multiple homicides.

    Science.gov (United States)

    Copeland, A R

    1989-09-01

    A study of multiple homicides or multiple deaths involving a solitary incident of violence by another individual was performed on the case files of the Office of the Medical Examiner of Metropolitan Dade County in Miami, Florida, during 1983-1987. A total of 107 multiple homicides were studied: 88 double, 17 triple, one quadruple, and one quintuple. The 236 victims were analyzed regarding age, race, sex, cause of death, toxicologic data, perpetrator, locale of the incident, and reason for the incident. This article compares this type of slaying with other types of homicide including those perpetrated by serial killers. Suggestions for future research in this field are offered.

  8. Multiple myeloma.

    LENUS (Irish Health Repository)

    Collins, Conor D

    2012-02-01

    Advances in the imaging and treatment of multiple myeloma have occurred over the past decade. This article summarises the current status and highlights how an understanding of both is necessary for optimum management.

  9. Parenting Multiples

    Science.gov (United States)

    ... babies do. Though it can be difficult to let go of the thousand other things you need to do, ... tell multiple babies apart when they first come home, so don't feel guilty if you mix yours up at ...

  10. Discrete Element Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Morris, J; Johnson, S

    2007-12-03

    The Distinct Element Method (also frequently referred to as the Discrete Element Method) (DEM) is a Lagrangian numerical technique where the computational domain consists of discrete solid elements which interact via compliant contacts. This can be contrasted with Finite Element Methods where the computational domain is assumed to represent a continuum (although many modern implementations of the FEM can accommodate some Distinct Element capabilities). Often the terms Discrete Element Method and Distinct Element Method are used interchangeably in the literature, although Cundall and Hart (1992) suggested that Discrete Element Methods should be a more inclusive term covering Distinct Element Methods, Displacement Discontinuity Analysis and Modal Methods. In this work, DEM specifically refers to the Distinct Element Method, where the discrete elements interact via compliant contacts, in contrast with Displacement Discontinuity Analysis where the contacts are rigid and all compliance is taken up by the adjacent intact material.

  11. Silence multiple

    DEFF Research Database (Denmark)

    Søndergaard, Katia Dupret

    The article highlights the importance of silences in the processes of innovation in organizations, and the claim is that silence and the absence of talk distribute authority, responsibility and decisions. The act of silencing is conceptualised as a central “configurating actor”. Using an Actor-Network...... it an important analytical element in understanding organizing and organizations....

  12. 电感耦合等离子体质谱法同时测定人发中多种重金属元素%Determination of Multiple Heavy Metal Elements in Hair by ICP -MS

    Institute of Scientific and Technical Information of China (English)

    王允雨; 降林华; 段宁; 聂容春; 罗乐; 马帅

    2011-01-01

    The hair was treated by electric hot plate digestion and microwave digestion with a mixed solution of HNO3 - H2O2 (2.5 + 1 ) and 4 heavy metals in the solution, including Se, Cr, As, Cd were determined by ICP- MS. Matrix effect was corrected with In and Bi as online internal standard. Correlation coefficient was larger than 0. 9999. Detection limits (3s) of the 4 elements were in the range of O. 006 - 0. 038μg·L^-1. The two different methods were used in the analysis of a hair standard reference material ,the results showed that microwave digestion - ICP - MS is a more ideal method for the detection of hair.%选择硝酸-过氧化氧(2.5+1)作为消解体系,对比分析电热板消解、微波消解两种生物样水前处理方法,采用电感耦合等离子体质谱(ICP—MS)法同时测定人发样中Se、Cr、As、Cd等4种重金属元素含量。以1n.Bi为在线内标校正基体效应。标准曲线线性关系较好(r〉0.9999),元素检出限0.006—0.038μg·L^-1,通过分析人发标准物质得出,微波消解-ICP—MS法是更为理想的发样检测分析方法。

  13. Moving KML geometry elements within Google Earth

    Science.gov (United States)

    Zhu, Liang-feng; Wang, Xi-feng; Pan, Xin

    2014-11-01

    During the process of modeling and visualizing geospatial information on the Google Earth virtual globe, there is an increasing demand to carry out such operations as moving geospatial objects defined by KML geometry elements horizontally or vertically. Due to the absence of the functionality and user interface for performing the moving transformation, it is either hard or impossible to interactively move multiple geospatial objects only using the existing Google Earth desktop application, especially when the data sets are in large volume. In this paper, we present a general framework and associated implementation methods for moving multiple KML geometry elements within Google Earth. In our proposed framework, we first load KML objects into the Google Earth plug-in, and then extract KML geometry elements from the imported KML objects. Subsequently, we interactively control the movement distance along a specified orientation by employing a custom user interface, calculate the transformed geographic location for each KML geometry element, and adjust geographic coordinates of the points in each KML objects. And finally, transformed KML geometry elements can be displayed in Google Earth for 3D visualization and spatial analysis. A key advantage of the proposed framework is that it provides a simple, uniform and efficient user interface for moving multiple KML geometry elements within Google Earth. More importantly, the proposed framework and associated implementations can be conveniently integrated into other customizable Google Earth applications to support interactively visualizing and analyzing geospatial objects defined by KML geometry elements.

  14. Convergence of adaptive finite element methods for eigenvalue problems

    OpenAIRE

    Garau, Eduardo M.; Morin, Pedro; Zuppa, Carlos

    2008-01-01

    In this article we prove convergence of adaptive finite element methods for second order elliptic eigenvalue problems. We consider Lagrange finite elements of any degree and prove convergence for simple as well as multiple eigenvalues under a minimal refinement of marked elements, for all reasonable marking strategies, and starting from any initial triangulation.

  15. Genomic analysis of ERVWE2 locus in patients with Multiple sclerosis: absence of genetic association but potential role of Human Endogenous retrovirus type W elements in molecular mimicry with myelin antigen.

    Directory of Open Access Journals (Sweden)

    Guilherme S Olival

    2013-06-01

    Full Text Available Human endogenous retroviruses (HERVs arise from ancient infections of the host germline cells by exogenous retroviruses, constituting 8% of the human genome. Elevated level of envelope transcripts from HERVs-W has been detected in CSF, plasma and brain tissues from patients with Multiple Sclerosis (MS, most of them from Xq22.3, 15q21.3 and 6q21 chromosomes. However, since the locus Xq22.3 (ERVWE2 lack the 5' LTR promoter and the putative protein should be truncated due to a stop codon, we investigated the ERVWE2 genomic loci from 84 individuals, including MS patients with active HERV-W expression detected in PBMC. In addition, an automated search for promoter sequences in 20kb nearby region of ERVWE2 reference sequence was performed. Several putative binding sites for cellular cofactors and enhancers were found, suggesting that transcription may occur via alternative promoters. However, ERVWE2 DNA sequencing of MS and healthy individuals revealed that all of them harbor a stop codon at site 39, undermining the expression of a full-length protein. Finally, since plaque formation in CNS of MS patients is attributed to immunological mechanisms triggered by autoimmune attack against myelin, we also investigated the level of similarity between envelope protein and myelin oligodendrocyte glycoprotein (MOG. Comparison of the MOG to the envelope identified five retroviral regions similar to the Ig-like domain of MOG. Interestingly, one of them includes T and B cell epitopes, capable to induce T effector functions and circulating Abs in rats. In sum, although no DNA substitutions that would link ERVWE2 to the MS pathogeny was found, the similarity between the envelope protein to MOG extends the idea that ERVEW2 may be involved on the immunopathogenesis of MS, maybe facilitating the MOG recognizing by the immune system. Although awaiting experimental evidences, the data presented here may expand the scope of the endogenous retroviruses involvement on MS

  16. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, Egon; Stenager, E N; Knudsen, Lone

    1994-01-01

    In a cross-sectional study of 117 randomly selected patients (52 men, 65 women) with definite multiple sclerosis, it was found that 76 percent were married or cohabitant, 8 percent divorced. Social contacts remained unchanged for 70 percent, but outgoing social contacts were reduced for 45 percent...

  17. Multiple Sclerosis.

    Science.gov (United States)

    Plummer, Nancy; Michael, Nancy, Ed.

    This module on multiple sclerosis is intended for use in inservice or continuing education programs for persons who administer medications in long-term care facilities. Instructor information, including teaching suggestions, and a listing of recommended audiovisual materials and their sources appear first. The module goal and objectives are then…

  18. Multiple Pregnancy

    Science.gov (United States)

    ... more frequently and are likely to have their babies by cesarean delivery . How can multiple pregnancy affect my risk of ... the result of a recognized disease. Cesarean Delivery: Delivery of a baby through surgical incisions made in the mother’s abdomen ...

  19. Multiple Medicines

    Science.gov (United States)

    ... DOO \\RXU YLWDPLQV DQG VXSSOHPHQWV WRR Drug Safety: Managing Multiple Drugs When you review your drugs with your doctor, ask these ... you got similar drugs from different doctors. Or you may take a brand-name and a generic drug that do the ...

  20. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E; Jensen, K

    1988-01-01

    Forty-two (12%) of a total of 366 patients with multiple sclerosis (MS) had psychiatric admissions. Of these, 34 (81%) had their first psychiatric admission in conjunction with or after the onset of MS. Classification by psychiatric diagnosis showed that there was a significant positive correlation...

  1. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E; Jensen, K

    1990-01-01

    An investigation on the correlation between ability to read TV subtitles and the duration of visual evoked potential (VEP) latency in 14 patients with definite multiple sclerosis (MS), indicated that VEP latency in patients unable to read the TV subtitles was significantly delayed in comparison...

  2. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E; Knudsen, L; Jensen, K

    1991-01-01

    In a cross-sectional investigation of 116 patients with multiple sclerosis, the social and sparetime activities of the patient were assessed by both patient and his/her family. The assessments were correlated to physical disability which showed that particularly those who were moderately disabled...

  3. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E; Knudsen, L; Jensen, K

    1994-01-01

    In a cross-sectional study of 94 patients (42 males, 52 females) with definite multiple sclerosis (MS) in the age range 25-55 years, the correlation of neuropsychological tests with the ability to read TV-subtitles and with the use of sedatives is examined. A logistic regression analysis reveals...

  4. Multiple Segment Factorial Vignette Designs

    Science.gov (United States)

    Ganong, Lawrence H.; Coleman, Marilyn

    2006-01-01

    The multiple segment factorial vignette design (MSFV) combines elements of experimental designs and probability sampling with the inductive, exploratory approach of qualitative research. MSFVs allow researchers to investigate topics that may be hard to study because of ethical or logistical concerns. Participants are presented with short stories…

  5. Multiple Segment Factorial Vignette Designs

    Science.gov (United States)

    Ganong, Lawrence H.; Coleman, Marilyn

    2006-01-01

    The multiple segment factorial vignette design (MSFV) combines elements of experimental designs and probability sampling with the inductive, exploratory approach of qualitative research. MSFVs allow researchers to investigate topics that may be hard to study because of ethical or logistical concerns. Participants are presented with short stories…

  6. Positive multiplication preserves dissipativity in commutative -algebras

    Directory of Open Access Journals (Sweden)

    Sommariva Alvise

    2001-01-01

    Full Text Available We prove that multiplication by a positive element preserves dissipativity (accretivity in the framework of commutative -algebras. A simple counterexample shows that the result is not valid, in general, in commutative involutory Banach algebras.

  7. Visual examinations of K west fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Pitner, A.L., Fluor Daniel Hanford

    1997-02-03

    Over 250 fuel assemblies stored in sealed canisters in the K West Basin were extracted and visually examined for damage. Substantial damage was expected based on high cesium levels previously measured in water samples taken from these canisters. About 11% of the inner elements and 45% of the outer elements were found to be failed in these examinations. Canisters that had cesium levels of I curie or more generally had multiple instances of major fuel damage.

  8. A new interface element for connecting independently modeled substructures

    Science.gov (United States)

    Ransom, Jonathan B.; Mccleary, Susan L.; Aminpour, Mohammad A.

    1993-01-01

    A new interface element based on the hybrid variational formulation is presented and demonstrated. The element provides a means of connecting independently modeled substructures whose nodes along the common boundary need not be coincident. The interface element extends previous work to include connecting an arbitrary number of substructures, the use of closed and generally curved interfaces, and the use of multiple, possibly nested, interfaces. Several applications of the element are presented and aspects of the implementation are discussed.

  9. Data Element Registry Services

    Data.gov (United States)

    U.S. Environmental Protection Agency — Data Element Registry Services (DERS) is a resource for information about value lists (aka code sets / pick lists), data dictionaries, data elements, and EPA data...

  10. Element-ary Development.

    Science.gov (United States)

    Schamp, Homer W., Jr.

    1989-01-01

    Describes the historic development of the periodic table from the four-element theory to the Lavoisier's table. Presents a table listing the old and new names of chemicals and the Lavoisier's table of elements. Lists two references. (YP)

  11. On Element SDD Approximability

    CERN Document Server

    Avron, Haim; Toledo, Sivan

    2009-01-01

    This short communication shows that in some cases scalar elliptic finite element matrices cannot be approximated well by an SDD matrix. We also give a theoretical analysis of a simple heuristic method for approximating an element by an SDD matrix.

  12. Writing analytic element programs in Python.

    Science.gov (United States)

    Bakker, Mark; Kelson, Victor A

    2009-01-01

    The analytic element method is a mesh-free approach for modeling ground water flow at both the local and the regional scale. With the advent of the Python object-oriented programming language, it has become relatively easy to write analytic element programs. In this article, an introduction is given of the basic principles of the analytic element method and of the Python programming language. A simple, yet flexible, object-oriented design is presented for analytic element codes using multiple inheritance. New types of analytic elements may be added without the need for any changes in the existing part of the code. The presented code may be used to model flow to wells (with either a specified discharge or drawdown) and streams (with a specified head). The code may be extended by any hydrogeologist with a healthy appetite for writing computer code to solve more complicated ground water flow problems.

  13. Combining classifiers for robust PICO element detection

    Directory of Open Access Journals (Sweden)

    Grad Roland

    2010-05-01

    Full Text Available Abstract Background Formulating a clinical information need in terms of the four atomic parts which are Population/Problem, Intervention, Comparison and Outcome (known as PICO elements facilitates searching for a precise answer within a large medical citation database. However, using PICO defined items in the information retrieval process requires a search engine to be able to detect and index PICO elements in the collection in order for the system to retrieve relevant documents. Methods In this study, we tested multiple supervised classification algorithms and their combinations for detecting PICO elements within medical abstracts. Using the structural descriptors that are embedded in some medical abstracts, we have automatically gathered large training/testing data sets for each PICO element. Results Combining multiple classifiers using a weighted linear combination of their prediction scores achieves promising results with an f-measure score of 86.3% for P, 67% for I and 56.6% for O. Conclusions Our experiments on the identification of PICO elements showed that the task is very challenging. Nevertheless, the performance achieved by our identification method is competitive with previously published results and shows that this task can be achieved with a high accuracy for the P element but lower ones for I and O elements.

  14. Elemental Chemical Puzzlers

    Science.gov (United States)

    Thomas, Nicholas C.

    2009-01-01

    This paper provides nine short chemically based puzzles or problems extensible for use with students from middle school to college. Some of these will strengthen students' recognition of individual elements and element names. Others require students to focus on the salient properties of given chemical elements.

  15. Spin multiplicities

    Energy Technology Data Exchange (ETDEWEB)

    Curtright, T.L., E-mail: curtright@miami.edu [Department of Physics, University of Miami, Coral Gables, FL 33124-8046 (United States); Van Kortryk, T.S., E-mail: vankortryk@gmail.com [Department of Physics, University of Miami, Coral Gables, FL 33124-8046 (United States); High Energy Physics Division, Argonne National Laboratory, Argonne, IL 60439-4815 (United States); Zachos, C.K., E-mail: zachos@anl.gov [Department of Physics, University of Miami, Coral Gables, FL 33124-8046 (United States); High Energy Physics Division, Argonne National Laboratory, Argonne, IL 60439-4815 (United States)

    2017-02-05

    The number of times spin s appears in the Kronecker product of n spin j representations is computed, and the large n asymptotic behavior of the result is obtained. Applications are briefly sketched. - Highlights: • We give a self-contained derivation of the spin multiplicities that occur in n-fold tensor products of spin-j representations. • We make use of group characters, properties of special functions, and asymptotic analysis of integrals. • We emphasize patterns that arise when comparing different values of j, and asymptotic behavior for large n. • Our methods and results should be useful for various statistical and quantum information theory calculations.

  16. Rare (Earth Elements [score

    Directory of Open Access Journals (Sweden)

    Camilo Méndez

    2014-12-01

    Full Text Available Rare (Earth Elements is a cycle of works for solo piano. The cycle was inspired by James Dillon’s Book of Elements (Vol. I-V. The complete cycle will consist of 14 pieces; one for each selected rare (earth element. The chosen elements are Neodymium, Erbium, Tellurium, Hafnium, Tantalum, Technetium, Indium, Dysprosium, Lanthanium, Cerium, Europium, Terbium, Yttrium and Darmstadtium. These elements were selected due to their special atomic properties that in many cases make them extremely valuable for the development of new technologies, and also because of their scarcity. To date, only 4 works have been completed Yttrium, Technetium, Indium and Tellurium.

  17. Musikalske elementer i musikaler

    OpenAIRE

    Jensen, Linnea Reitan

    2014-01-01

    Denne masteroppgaven undersøker hvordan musikalske elementer kan bli brukt i musikaler for å påvirke den dramaturgiske helheten. Gjennom både musikalsk og dramaturgisk analyse viser jeg hvordan elementer i musikk kan ha innvirkning på forestillingens dramaturgi. In this master thesis I am aiming to examine the musical elements used in the songs in musicals. Music is an important element in the musical, and therefore I want to look at how some musical elements can contribute to the musical'...

  18. Composite structure of auxin response elements.

    Science.gov (United States)

    Ulmasov, T; Liu, Z B; Hagen, G; Guilfoyle, T J

    1995-10-01

    The auxin-responsive soybean GH3 gene promoter is composed of multiple auxin response elements (AuxREs), and each AuxRE contributes incrementally to the strong auxin inducibility to the promoter. Two independent AuxREs of 25 bp (D1) and 32 bp (D4) contain the sequence TGTCTC. Results presented here show that the TGTCTC element in D1 and D4 is required but not sufficient for auxin inducibility in carrot protoplast transient expression assays. Additional nucleotides upstream of TGTCTC are also required for auxin inducibility. These upstream sequences showed constitutive activity and no auxin inducibility when part or all of the TGTCTC element was mutated or deleted. In D1, the constitutive element overlaps the 5' portion of TGTCTC; in D4, the constitutive element is separated from TGTCTC. An 11-bp element in D1, CCTCGTGTCTC, conferred auxin inducibility to a minimal cauliflower mosaic virus 35S promoter in transgenic tobacco seedlings as well as in carrot protoplasts (i.e., transient expression assays). Both constitutive elements bound specifically to plant nuclear proteins, and the constitutive element in D1 bound to a recombinant soybean basic leucine zipper transcription factor with G-box specificity. To demonstrate further the composite nature of AuxREs and the ability of the TGTCTC element to confer auxin inducibility, we created a novel AuxRE by placing a yeast GAL4 DNA binding site adjacent to the TGTCTC element. Expression of a GAL4-c-Rel transactivator in the presence of this novel AuxRE resulted in auxin-inducible expression. Our results indicate that at least some AuxREs have a composite structure consisting of a constitutive element adjacent to a conserved TGTCTC element that confers auxin inducibility.

  19. Multiple elliptic gamma functions associated to cones

    CERN Document Server

    Winding, Jacob

    2016-01-01

    We define generalizations of the multiple elliptic gamma functions and the multiple sine functions, associated to good rational cones. We explain how good cones are related to collections of $SL_r(\\mathbb{Z})$-elements and prove that the generalized multiple sine and multiple elliptic gamma functions enjoy infinite product representations and modular properties determined by the cone. This generalizes the modular properties of the elliptic gamma function studied by Felder and Varchenko, and the results about the usual multiple sine and elliptic gamma functions found by Narukawa.

  20. [Multiple apheresis].

    Science.gov (United States)

    Coffe, C

    2007-05-01

    Multiple apheresis makes it possible to obtain at least two labile blood components from a single donor using a cell separator. It can be either multicomponent apheresis leading to the preparation of at least two different blood component types or red blood cell apheresis providing two identical red blood cell concentrates. These techniques available in addition to whole blood donation, are modifying collection strategies in many Etablissements Français du Sang and will contribute to improve stock logistics in the future. In areas with insufficient stock, these procedures will help achieve blood component self-sufficiency. The author first describes the principle underlying different--current or future--techniques as well as their advantages and drawbacks. He finally addresses the potential impact of these processes on the evolution of blood collection and the advantages to be gained.

  1. Finite element procedures

    CERN Document Server

    Bathe, Klaus-Jürgen

    2015-01-01

    Finite element procedures are now an important and frequently indispensable part of engineering analyses and scientific investigations. This book focuses on finite element procedures that are very useful and are widely employed. Formulations for the linear and nonlinear analyses of solids and structures, fluids, and multiphysics problems are presented, appropriate finite elements are discussed, and solution techniques for the governing finite element equations are given. The book presents general, reliable, and effective procedures that are fundamental and can be expected to be in use for a long time. The given procedures form also the foundations of recent developments in the field.

  2. Multiplicative Valued Difference Fields

    CERN Document Server

    Pal, Koushik

    2010-01-01

    The theory of valued difference fields $(K, \\sigma, v)$ depends on how the valuation $v$ interacts with the automorphism $\\sigma$. Two special cases have already been worked out - the isometric case, where $v(\\sigma(x)) = v(x)$ for all $x\\in K$, has been worked out by Luc Belair, Angus Macintyre and Thomas Scanlon; and the contractive case, where $v(\\sigma(x)) > n\\cdot v(x)$ for all $n\\in\\mathbb{N}$ and $x\\in K^\\times$ with $v(x) > 0$, has been worked out by Salih Azgin. In this paper we deal with a more general version, called the multiplicative case, where $v(\\sigma(x)) = \\rho\\cdot v(x)$, where $\\rho (> 0)$ is interpreted as an element of a real-closed field. We give an axiomatization and prove a relative quantifier elimination theorem for such a theory.

  3. 3-wave mixing Josephson dipole element

    Science.gov (United States)

    Frattini, N. E.; Vool, U.; Shankar, S.; Narla, A.; Sliwa, K. M.; Devoret, M. H.

    2017-05-01

    Parametric conversion and amplification based on three-wave mixing are powerful primitives for efficient quantum operations. For superconducting qubits, such operations can be realized with a quadrupole Josephson junction element, the Josephson Ring Modulator, which behaves as a loss-less three-wave mixer. However, combining multiple quadrupole elements is a difficult task so it would be advantageous to have a three-wave dipole element that could be tessellated for increased power handling and/or information throughput. Here, we present a dipole circuit element with third-order nonlinearity, which implements three-wave mixing. Experimental results for a non-degenerate amplifier based on the proposed third-order nonlinearity are reported.

  4. Multiple myeloma.

    Science.gov (United States)

    Anderson, Kenneth C; Shaughnessy, John D; Barlogie, Bart; Harousseau, Jean-Luc; Roodman, G David

    2002-01-01

    This update provides new insights into the biology, diagnosis, prognosis, and treatment of multiple myeloma (MM) and its complications. In Section I, Drs. John Shaughnessy, Jr., and Bart Barlogie first correlate global gene microarray expression profiling of patient MM samples with normal plasma cells to provide the basis for a developmental stage-based classification of MM. The powerful clinical utility of these analyses is illustrated in delineating mechanism of drug action, identifying novel therapeutic targets, and providing a molecular analysis not only of the tumor cell, but also of the tumor microenvironment, in MM. In Section II, Dr. Jean-Luc Harousseau reviews the rationale and current results of high dose therapy and autologous stem cell transplantation in MM, including optimal patient selection, prognostic factors, conditioning regimens, sources of stem cells, use of tandem transplantation, and maintenance therapy. He then provides an update on the results of allotransplantation approaches in MM, focusing on proposed methods to reduce toxicity and exploit the graft-versus-MM alloimmune effect by transplantation earlier in the disease course, T cell depletion, and nonmyeloablative transplantation. In Section III, Dr. G. David Roodman provides recent insights into the mechanisms of osteoclast activation, interactions between bone and MM cells, adhesive interactions in MM bone disease, and osteoblast suppression. These recent advances not only provide insights into pathogenesis of MM bone disease, but also form the framework for novel therapeutics. In Section IV, Dr. Kenneth Anderson provides an up-to-date discussion of the role of the bone marrow microenvironment in promoting growth, survival, drug resistance, and migration of MM cells and the signaling cascades mediating these sequelae. These studies provide the framework for evaluation of novel therapeutics targeting the MM cell-host interaction in vivo in animal models and in derived clinical trials.

  5. Multiple osteochondromas

    Directory of Open Access Journals (Sweden)

    Bovée Judith VMG

    2008-02-01

    Full Text Available Abstract Multiple osteochondromas (MO is characterised by development of two or more cartilage capped bony outgrowths (osteochondromas of the long bones. The prevalence is estimated at 1:50,000, and it seems to be higher in males (male-to-female ratio 1.5:1. Osteochondromas develop and increase in size in the first decade of life, ceasing to grow when the growth plates close at puberty. They are pedunculated or sessile (broad base and can vary widely in size. The number of osteochondromas may vary significantly within and between families, the mean number of locations is 15–18. The majority are asymptomatic and located in bones that develop from cartilage, especially the long bones of the extremities, predominantly around the knee. The facial bones are not affected. Osteochondromas may cause pain, functional problems and deformities, especially of the forearm, that may be reason for surgical removal. The most important complication is malignant transformation of osteochondroma towards secondary peripheral chondrosarcoma, which is estimated to occur in 0.5–5%. MO is an autosomal dominant disorder and is genetically heterogeneous. In almost 90% of MO patients germline mutations in the tumour suppressor genes EXT1 or EXT2 are found. The EXT genes encode glycosyltransferases, catalyzing heparan sulphate polymerization. The diagnosis is based on radiological and clinical documentation, supplemented with, if available, histological evaluation of osteochondromas. If the exact mutation is known antenatal diagnosis is technically possible. MO should be distinguished from metachondromatosis, dysplasia epiphysealis hemimelica and Ollier disease. Osteochondromas are benign lesions and do not affect life expectancy. Management includes removal of osteochondromas when they give complaints. Removed osteochondromas should be examined for malignant transformation towards secondary peripheral chondrosarcoma. Patients should be well instructed and regular

  6. Main: -300ELEMENT [PLACE

    Lifescience Database Archive (English)

    Full Text Available -300ELEMENT S000122 11-May-2006 (last modified) kehi Present upstream of the promot...er from the B-hordein gene of barley and the alpha-gliadin, gamma-gliadin, and low molecular weight glutenin... genes of wheat; See S000001 -300CORE; See S000002 -300MOTIF; -300 element; hordein; gliadin; glutenin; seed; wheat (Triticum aestivum) TGHAAARK ...

  7. A dry element

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, T.; Ota, A.

    1983-08-11

    The agglomerate for the element is made from activated charcoal powder, an electrically conducting additive and a neutral electrolyte. The activated charcoal makes up 30 to 50 percent of the weight of the agglomerate. It is a mixture of hydrophobized and unhydrophobized powder in a ratio of 85 to 70 to 15 to 30. The element has high discharge characteristics.

  8. A battery element

    Energy Technology Data Exchange (ETDEWEB)

    Nakai, M.; Koboyasi, S.; Oisi, K.; Okadzaki, R.; Ota, A.

    1983-07-29

    An anode made of an alkaline or an alkaline earth metal and an electrolyte based on an organic solvent are used in the element. A mixture of Mn203 and Mn304 in a 9 to 1 to 3 to 7 ratio serves as the cathode. The element has a stable discharge curve at a nominal voltage of 1.5 volts.

  9. Multivariate Hawkes process models of the occurrence of regulatory elements

    DEFF Research Database (Denmark)

    Carstensen, L; Sandelin, A; Winther, Ole;

    2010-01-01

    BACKGROUND: A central question in molecular biology is how transcriptional regulatory elements (TREs) act in combination. Recent high-throughput data provide us with the location of multiple regulatory regions for multiple regulators, and thus with the possibility of analyzing the multivariate di...... occurrences of multiple TREs along the genome that is capable of providing new insights into dependencies among elements involved in transcriptional regulation. The method is available as an R package from http://www.math.ku.dk/~richard/ppstat/.......BACKGROUND: A central question in molecular biology is how transcriptional regulatory elements (TREs) act in combination. Recent high-throughput data provide us with the location of multiple regulatory regions for multiple regulators, and thus with the possibility of analyzing the multivariate...

  10. The solar element

    DEFF Research Database (Denmark)

    Kragh, Helge

    2009-01-01

    Apart from hydrogen, helium is the most abundant chemical element in the universe, and yet it was only discovered on the Earth in 1895. Its early history is unique because it encompasses astronomy as well as chemistry, two sciences which the spectroscope brought into contact during the second half...... of the nineteenth century. In the modest form of a yellow spectral line known as D3, 'helium' was sometimes supposed to exist in the Sun's atmosphere, an idea which is traditionally ascribed to J. Norman Lockyer. Did Lockyer discover helium as a solar element? How was the suggestion received by chemists, physicists...... elements might be different. The complex story of how helium became established as both a solar and terrestrial element involves precise observations as well as airy speculations. It is a story that is unique among the discovery histories of the chemical elements....

  11. Preparing for Multiple Births

    Science.gov (United States)

    ... Video Games, and the Internet Preparing for Multiple Births KidsHealth > For Parents > Preparing for Multiple Births Print ... a combination of both. The Risks of Multiple Births The most common risk involved with multiple births ...

  12. Multiple Myeloma Symptoms

    Science.gov (United States)

    ... Treatment Center Finder Home » About Multiple Myeloma » Symptoms Multiple Myeloma Symptoms Multiple myeloma symptoms may vary by patient, ... to be managed or prevented. The most common multiple myeloma symptoms may include: Bone pain or bone fractures ...

  13. Flow Element Models

    DEFF Research Database (Denmark)

    Heiselberg, Per; Nielsen, Peter V.

    Air distribution in ventilated rooms is a flow process that can be divided into different elements such as supply air jets, exhaust flows, thermal plumes, boundary layer flows, infiltration and gravity currents. These flow elements are isolated volumes where the air movement is controlled...... by a restricted number of parameters, and the air movement is fairly independent of the general flow in the enclosure. In many practical situations, the most convenient· method is to design the air distribution system using flow element theory....

  14. Discovery of element 112

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, S. [GSI, Darmstadt (Germany)

    1996-12-31

    The new elements 110, 111, and 112 were synthesized and unambiguously identified in experiments at SHIP. Due to strong shell effects the dominant decay mode is not fission, but emission of alpha particles. Theoretical investigations predict that maximum shell effects should exist in nuclei near proton number 114 and neutron number 184. Measurements give hope that isotopes of element 114 close to the island of spherical Superheavy Elements could be produced by fusion reactions using {sup 118}Pb as target. systematic studies of the reaction cross-sections indicate that transfer of nucleons is the important process to initiate the fusion.

  15. Finite element mesh generation

    CERN Document Server

    Lo, Daniel SH

    2014-01-01

    Highlights the Progression of Meshing Technologies and Their ApplicationsFinite Element Mesh Generation provides a concise and comprehensive guide to the application of finite element mesh generation over 2D domains, curved surfaces, and 3D space. Organised according to the geometry and dimension of the problem domains, it develops from the basic meshing algorithms to the most advanced schemes to deal with problems with specific requirements such as boundary conformity, adaptive and anisotropic elements, shape qualities, and mesh optimization. It sets out the fundamentals of popular techniques

  16. Thermionic fuel element technology status

    Science.gov (United States)

    Holland, J. W.; Horner, M. W.; Yang, L.

    1985-01-01

    The results of research, conducted between the mid-1960s and 1973, on the multiconverter thermionic fuel elements (TFEs) that comprise the reactor core of an SP-100 thermionic reactor system are presented. Fueled-emitter technology, insulator technology and cell and TFE assembly technology of the prototypical TFEs which were tested in-pile and out-of-pile during these years are described. The proto-TFEs have demonstrated reproducible performance within 5 percent and no premature failures within the 1.5 yr of operation (with projected 3-yr lifetimes). The two primary life-limiting factors had been identified as thermionic emitter dimensional increase due to interactions with the fuel and electrical insulator structural damage from fast neutrons. Multiple options for extending TFE lifetimes to 7 yr or longer are available and will be investigated in the 1984-1985 SP-100 program for resolution of critical technology issues. Design diagrams and test graphs are included.

  17. Multivariate Hawkes process models of the occurrence of regulatory elements

    DEFF Research Database (Denmark)

    Carstensen, L; Sandelin, A; Winther, Ole

    2010-01-01

    BACKGROUND: A central question in molecular biology is how transcriptional regulatory elements (TREs) act in combination. Recent high-throughput data provide us with the location of multiple regulatory regions for multiple regulators, and thus with the possibility of analyzing the multivariate di...

  18. Divergent picornavirus IRES elements

    DEFF Research Database (Denmark)

    Belsham, Graham

    2009-01-01

    Internal ribosome entry site (IRES) elements were first identified about 20 years ago within the 5' untranslated region of picornavirus RNAs. They direct a cap-independent mechanism of translation initiation on the viral RNA. Within the picornavirus family it is now known that there are four...... classes of IRES element which vary in size (450-270nt), they also have different, complex, secondary structures and distinct requirements for cellular proteins to allow them to function. This review describes the features of each class of picornavirus IRES element but focuses on the characteristics...... of the most recently described group, initially identified within the porcine teschovirus-1 RNA, which has strong similarities to the IRES elements from within the genomes of hepatitis C virus and the pestiviruses which are members of the flavivirus family. The selection of the initiation codon...

  19. New functionalities in abundant element oxides: ubiquitous element strategy.

    Science.gov (United States)

    Hosono, Hideo; Hayashi, Katsuro; Kamiya, Toshio; Atou, Toshiyuki; Susaki, Tomofumi

    2011-06-01

    While most ceramics are composed of ubiquitous elements (the ten most abundant elements within the Earth's crust), many advanced materials are based on rare elements. A 'rare-element crisis' is approaching owing to the imbalance between the limited supply of rare elements and the increasing demand. Therefore, we propose a 'ubiquitous element strategy' for materials research, which aims to apply abundant elements in a variety of innovative applications. Creation of innovative oxide materials and devices based on conventional ceramics is one specific challenge. This review describes the concept of ubiquitous element strategy and gives some highlights of our recent research on the synthesis of electronic, thermionic and structural materials using ubiquitous elements.

  20. New roof element system

    DEFF Research Database (Denmark)

    Ditlev, Jesper; Rudbeck, Claus Christian

    1997-01-01

    The aim of the project has been to develop an element system for warm deck roofs which, from a thermal and economical point of view, can deal with the future demands for heat loss coefficients for low slope roofs.......The aim of the project has been to develop an element system for warm deck roofs which, from a thermal and economical point of view, can deal with the future demands for heat loss coefficients for low slope roofs....

  1. Novel porcine repetitive elements

    Directory of Open Access Journals (Sweden)

    Nonneman Dan J

    2006-12-01

    Full Text Available Abstract Background Repetitive elements comprise ~45% of mammalian genomes and are increasingly known to impact genomic function by contributing to the genomic architecture, by direct regulation of gene expression and by affecting genomic size, diversity and evolution. The ubiquity and increasingly understood importance of repetitive elements contribute to the need to identify and annotate them. We set out to identify previously uncharacterized repetitive DNA in the porcine genome. Once found, we characterized the prevalence of these repeats in other mammals. Results We discovered 27 repetitive elements in 220 BACs covering 1% of the porcine genome (Comparative Vertebrate Sequencing Initiative; CVSI. These repeats varied in length from 55 to 1059 nucleotides. To estimate copy numbers, we went to an independent source of data, the BAC-end sequences (Wellcome Trust Sanger Institute, covering approximately 15% of the porcine genome. Copy numbers in BAC-ends were less than one hundred for 6 repeat elements, between 100 and 1000 for 16 and between 1,000 and 10,000 for 5. Several of the repeat elements were found in the bovine genome and we have identified two with orthologous sites, indicating that these elements were present in their common ancestor. None of the repeat elements were found in primate, rodent or dog genomes. We were unable to identify any of the replication machinery common to active transposable elements in these newly identified repeats. Conclusion The presence of both orthologous and non-orthologous sites indicates that some sites existed prior to speciation and some were generated later. The identification of low to moderate copy number repetitive DNA that is specific to artiodactyls will be critical in the assembly of livestock genomes and studies of comparative genomics.

  2. New roof element system

    DEFF Research Database (Denmark)

    Ditlev, Jesper; Rudbeck, Claus Christian

    1997-01-01

    The aim of the project has been to develop an element system for warm deck roofs which, from a thermal and economical point of view, can deal with the future demands for heat loss coefficients for low slope roofs.......The aim of the project has been to develop an element system for warm deck roofs which, from a thermal and economical point of view, can deal with the future demands for heat loss coefficients for low slope roofs....

  3. Structural elements design manual

    CERN Document Server

    Draycott, Trevor

    2012-01-01

    Gives clear explanations of the logical design sequence for structural elements. The Structural Engineer says: `The book explains, in simple terms, and with many examples, Code of Practice methods for sizing structural sections in timber, concrete,masonry and steel. It is the combination into one book of section sizing methods in each of these materials that makes this text so useful....Students will find this an essential support text to the Codes of Practice in their study of element sizing'.

  4. A battery element

    Energy Technology Data Exchange (ETDEWEB)

    Vatanabe, U.; Aoki, K.; Ito, K.; Ogava, K.; Okadzaki, R.

    1983-07-29

    An anode made of a light metal is used in the element, along with an anhydrous liquid electrolyte and a cathode made of CuC12(CFn)x or another material. The current tap of the anode is made from aluminum, gold, silver or another metal of the platinum group and the current tap may be coated with this metal. The thickness of the coating is 0.1 to 1 micrometer. The element has a long storage life.

  5. Atoms, molecules & elements

    CERN Document Server

    Graybill, George

    2007-01-01

    Young scientists will be thrilled to explore the invisible world of atoms, molecules and elements. Our resource provides ready-to-use information and activities for remedial students using simplified language and vocabulary. Students will label each part of the atom, learn what compounds are, and explore the patterns in the periodic table of elements to find calcium (Ca), chlorine (Cl), and helium (He) through hands-on activities.

  6. Analysis of composite structural elements

    Directory of Open Access Journals (Sweden)

    A. Baier

    2010-12-01

    Full Text Available Purpose: The themes of the study are composite structural components. For this purpose have been designed and built several research positions.Design/methodology/approach: Using different structural materials to build new device components requires multiple tests of the components. Research posts were designed in the advanced graphical program CAx Siemens NX 7.5. Analysed samples were made from the glass fibre, aramid and carbon of various weights. Due to the specific use of composite materials it focuses on the elements in the form of plates and flat bars. For the examination of experimental strain gauge technique was used bead, the force sensor and displacement sensor. The experimental methods were compared with computer simulation using the FEM.Findings: The aim of this study was to determine the basic material constants and a comparison of the experimental method and the method of computer simulation.Research limitations/implications: Change the number of layers and how to connect the laminate with the steel plate changes mechanical properties of the structural component.Practical implications: The ultimate result will be knowledge on the different forms of laminates, such as material properties, the stresses in all layers, strain and comparing the results obtained by two methods.Originality/value: The expected outcome of the study will be the composition and method of joining composite laminate with a steel plate to the possible application in the repair and construction of structural elements of freight wagons.

  7. The multiplicity of Brazilian Social Psychology

    OpenAIRE

    Mariana Prioli Cordeiro; Mary Jane Paris Spink

    2014-01-01

    Brazilian Social Psychology has many definitions, theories and objects of study. In this essay, based on Actor-Network Theory, we argue that these are not different aspects or attributes of a single object, but elements that help to perform different versions of this object. They are, therefore, elements that make Social Psychologies different, although related to each other. They produce a multiple Social Psychology, which is more than one and, at the same time, less than many. In doing so, ...

  8. Finite Element Simulation for Interfacial Evolutions

    Institute of Scientific and Technical Information of China (English)

    JianmingHUANG; WeiYANG

    1998-01-01

    A three-dimensional finite element scheme based upon a weak statement of the classical theory is explored to simulate migration of interfaces in materials under linear evaporation and condensation kinetics,The present scheme is exemplified by two cases:facet formation of single crystals;and the evolution of a tri-crystal film on a substrate where the effect of multiple kinetics is demonstrated.

  9. Elements of an Art - Agile Coaching

    Science.gov (United States)

    Lundh, Erik

    This tutorial gives you a lead on becoming or redefining yourself as an Agile Coach. Introduction to elements and dimensions of state-of-the-art Agile Coaching. How to position the agile coach to be effective in a larger setting. Making the agile transition - from a single team to thousands of people. How to support multiple teams as a coach. How to build a coaches network in your company. Challenges when the agile coach is a consultant and the organization is large.

  10. Peridynamic Multiscale Finite Element Methods

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Timothy [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bond, Stephen D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Littlewood, David John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Moore, Stan Gerald [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The problem of computing quantum-accurate design-scale solutions to mechanics problems is rich with applications and serves as the background to modern multiscale science research. The prob- lem can be broken into component problems comprised of communicating across adjacent scales, which when strung together create a pipeline for information to travel from quantum scales to design scales. Traditionally, this involves connections between a) quantum electronic structure calculations and molecular dynamics and between b) molecular dynamics and local partial differ- ential equation models at the design scale. The second step, b), is particularly challenging since the appropriate scales of molecular dynamic and local partial differential equation models do not overlap. The peridynamic model for continuum mechanics provides an advantage in this endeavor, as the basic equations of peridynamics are valid at a wide range of scales limiting from the classical partial differential equation models valid at the design scale to the scale of molecular dynamics. In this work we focus on the development of multiscale finite element methods for the peridynamic model, in an effort to create a mathematically consistent channel for microscale information to travel from the upper limits of the molecular dynamics scale to the design scale. In particular, we first develop a Nonlocal Multiscale Finite Element Method which solves the peridynamic model at multiple scales to include microscale information at the coarse-scale. We then consider a method that solves a fine-scale peridynamic model to build element-support basis functions for a coarse- scale local partial differential equation model, called the Mixed Locality Multiscale Finite Element Method. Given decades of research and development into finite element codes for the local partial differential equation models of continuum mechanics there is a strong desire to couple local and nonlocal models to leverage the speed and state of the

  11. Multiple—tube Permeable Element for Combined Blowing Converter

    Institute of Scientific and Technical Information of China (English)

    YANGWen-yuan; XUWei-hua; 等

    1994-01-01

    The method consisting of cold test and hot simulating has been proved to be reliable for designing permeable ele-ments.The carbon-magnesia multiple-tube permeable ele-ments which are formed by isostatical pressure have higher density,high heat resistance and good thermoshock resis-tance,The brickwork ,maintenance and erosion meha-nism of permeable elements were studied.The tehnology of combined blowing wa established based on the peculiari-ties of semi-steel refining at Panzhihua Irom& Steel Co.(PZISC).The service life of permeable elements reahed 600 heats,that means the permeable elements can work synchronitially with converter lining.

  12. Fuel Element Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  13. Creativity Management Key Elements

    Directory of Open Access Journals (Sweden)

    Rosa María Fuchs Ángeles

    2015-09-01

    Full Text Available Organizations are constantly looking towards innovation. In order to reach it they must foment creativity. This paper analyzes a series of elements considered in the organizational creativity management and proposes a model with the indispensable factors that organizations should consider to reach it. These elements are: culture and organizational environment, strategy, structure, communication, relation with customers, human resources (recruiting, training, job design, compensation, promotion, and performance evaluation, long term orientation and the organizational life cycle. Having the analysis of those elements as a basis, the indispensable pillars on management creativity are identified. The proposed model is based on 5 pillars: the alignment between strategic, culture and organizational structure, called by the authors 'Holy Trinity'; intern publicity; customer’s voice; recognition and a look towards future. Finally, the case of an innovative Peruvian enterprise is presented from the model’s perspective and the study conclusions.

  14. Elemental analysis in biotechnology.

    Science.gov (United States)

    Hann, Stephan; Dernovics, Mihaly; Koellensperger, Gunda

    2015-02-01

    This article focuses on analytical strategies integrating atomic spectroscopy in biotechnology. The rationale behind developing such methods is inherently linked to unique features of the key technique in elemental analysis, which is inductively coupled plasma mass spectrometry: (1) the high sensitivity and selectivity of state of the art instrumentation, (2) the possibility of accurate absolute quantification even in complex matrices, (3) the capability of combining elemental detectors with chromatographic separation methods and the versatility of the latter approach, (4) the complementarity of inorganic and organic mass spectrometry, (5) the multi-element capability and finally (6) the capability of isotopic analysis. The article highlights the most recent bio-analytical developments exploiting these methodological advantages and shows the potential in biotechnological applications.

  15. Advanced finite element technologies

    CERN Document Server

    Wriggers, Peter

    2016-01-01

    The book presents an overview of the state of research of advanced finite element technologies. Besides the mathematical analysis, the finite element development and their engineering applications are shown to the reader. The authors give a survey of the methods and technologies concerning efficiency, robustness and performance aspects. The book covers the topics of mathematical foundations for variational approaches and the mathematical understanding of the analytical requirements of modern finite element methods. Special attention is paid to finite deformations, adaptive strategies, incompressible, isotropic or anisotropic material behavior and the mathematical and numerical treatment of the well-known locking phenomenon. Beyond that new results for the introduced approaches are presented especially for challenging nonlinear problems.

  16. An alkaline element

    Energy Technology Data Exchange (ETDEWEB)

    Arita, T.; Murakami, K.; Okha, K.

    1983-04-28

    A cathode with a dual layer active mass is installed in the disk shaped alkaline silver and zinc element. The first layer, which is turned towards the anode, contains 85 parts Ag2O, 5 parts electrolytic MnO2 and 10 parts graphite. The second layer, which contacts the bottom of the element, contains 35 parts Ag2O, 60 parts electrolytic MnO2 and 5 parts graphite. The electrical capacity of the first and second layers is 60 and 40, respectively. The first layer may be discharged with a high current density and the second layer with less current density. The element has high characteristics with comparatively low cost.

  17. Intelligent Elements for ISHM

    Science.gov (United States)

    Schmalzel, John L.; Morris, Jon; Turowski, Mark; Figueroa, Fernando; Oostdyk, Rebecca

    2008-01-01

    There are a number of architecture models for implementing Integrated Systems Health Management (ISHM) capabilities. For example, approaches based on the OSA-CBM and OSA-EAI models, or specific architectures developed in response to local needs. NASA s John C. Stennis Space Center (SSC) has developed one such version of an extensible architecture in support of rocket engine testing that integrates a palette of functions in order to achieve an ISHM capability. Among the functional capabilities that are supported by the framework are: prognostic models, anomaly detection, a data base of supporting health information, root cause analysis, intelligent elements, and integrated awareness. This paper focuses on the role that intelligent elements can play in ISHM architectures. We define an intelligent element as a smart element with sufficient computing capacity to support anomaly detection or other algorithms in support of ISHM functions. A smart element has the capabilities of supporting networked implementations of IEEE 1451.x smart sensor and actuator protocols. The ISHM group at SSC has been actively developing intelligent elements in conjunction with several partners at other Centers, universities, and companies as part of our ISHM approach for better supporting rocket engine testing. We have developed several implementations. Among the key features for these intelligent sensors is support for IEEE 1451.1 and incorporation of a suite of algorithms for determination of sensor health. Regardless of the potential advantages that can be achieved using intelligent sensors, existing large-scale systems are still based on conventional sensors and data acquisition systems. In order to bring the benefits of intelligent sensors to these environments, we have also developed virtual implementations of intelligent sensors.

  18. Elements of social security

    DEFF Research Database (Denmark)

    Hansen, Hans

    (Alte Länder). This is the 9th and last edition of the publication,covering income levels and rules for social security and personal taxation for 1999. Basis for the projections to 1999 income levels is the 1998 data (in some cases 1999 data)for OECD's Taxing Wages as reported by national experts.......Elements of Social Security is a comparative study of important elements of the social security systems in Denmark (DK), Sweden (S), Finland (FIN), Austria (A), Germany (D), the Netherlands (NL), Great Britain (GB) and Canada (CAN). It should be emphasized that Germany is the former West Germany...

  19. Rocket propulsion elements

    CERN Document Server

    Sutton, George P

    2011-01-01

    The definitive text on rocket propulsion-now revised to reflect advancements in the field For sixty years, Sutton's Rocket Propulsion Elements has been regarded as the single most authoritative sourcebook on rocket propulsion technology. As with the previous edition, coauthored with Oscar Biblarz, the Eighth Edition of Rocket Propulsion Elements offers a thorough introduction to basic principles of rocket propulsion for guided missiles, space flight, or satellite flight. It describes the physical mechanisms and designs for various types of rockets' and provides an unders

  20. Finite element analysis

    CERN Document Server

    2010-01-01

    Finite element analysis is an engineering method for the numerical analysis of complex structures. This book provides a bird's eye view on this very broad matter through 27 original and innovative research studies exhibiting various investigation directions. Through its chapters the reader will have access to works related to Biomedical Engineering, Materials Engineering, Process Analysis and Civil Engineering. The text is addressed not only to researchers, but also to professional engineers, engineering lecturers and students seeking to gain a better understanding of where Finite Element Analysis stands today.

  1. Finite elements and approximation

    CERN Document Server

    Zienkiewicz, O C

    2006-01-01

    A powerful tool for the approximate solution of differential equations, the finite element is extensively used in industry and research. This book offers students of engineering and physics a comprehensive view of the principles involved, with numerous illustrative examples and exercises.Starting with continuum boundary value problems and the need for numerical discretization, the text examines finite difference methods, weighted residual methods in the context of continuous trial functions, and piecewise defined trial functions and the finite element method. Additional topics include higher o

  2. Elements of social security

    DEFF Research Database (Denmark)

    Hansen, Hans

    Elements of Social Security is a comparative study of important elements of the social security systems in Denmark (DK), Sweden (S), Finland (FIN), Austria (A), Germany (D), the Netherlands (NL), Great Britain (GB) and Canada (CAN). It should be emphasized that Germany is the former West Germany...... (Alte Länder). This is the 9th and last edition of the publication,covering income levels and rules for social security and personal taxation for 1999. Basis for the projections to 1999 income levels is the 1998 data (in some cases 1999 data)for OECD's Taxing Wages as reported by national experts....

  3. Annihilators of nilpotent elements

    Directory of Open Access Journals (Sweden)

    Abraham A. Klein

    2005-01-01

    Full Text Available Let x be a nilpotent element of an infinite ring R (not necessarily with 1. We prove that A(x—the two-sided annihilator of x—has a large intersection with any infinite ideal I of R in the sense that card(A(x∩I=cardI. In particular, cardA(x=cardR; and this is applied to prove that if N is the set of nilpotent elements of R and R≠N, then card(R\\N≥cardN.

  4. Archaeal extrachromosomal genetic elements

    DEFF Research Database (Denmark)

    Wang, Haina; Peng, Nan; Shah, Shiraz Ali

    2015-01-01

    SUMMARY: Research on archaeal extrachromosomal genetic elements (ECEs) has progressed rapidly in the past decade. To date, over 60 archaeal viruses and 60 plasmids have been isolated. These archaeal viruses exhibit an exceptional diversity in morphology, with a wide array of shapes, such as spind......SUMMARY: Research on archaeal extrachromosomal genetic elements (ECEs) has progressed rapidly in the past decade. To date, over 60 archaeal viruses and 60 plasmids have been isolated. These archaeal viruses exhibit an exceptional diversity in morphology, with a wide array of shapes...

  5. An alkaline element

    Energy Technology Data Exchange (ETDEWEB)

    Obi, F.

    1983-09-29

    A current tap pressed into the anode is installed in the central part of the top of the element. There is an internal top made of plastic under the top. There is a projection in the center of the top with an opening, through which the current tap is passed. The edge of the plastic top serves as an insulation lining between the metallic top and the body, which serves as the current tap for the cathode. A separator is placed between the anode and the cathode. Electrolyte leaks are prevented in the slotted disk elements.

  6. Beam transport elements

    CERN Multimedia

    1965-01-01

    Two of the beam transport elements for the slow ejection system. On the left, a quadrupole 1.2 m long with a 5 cm aperture, capable of producing a gradient of 5000 gauss. On the right, a 1 m bending magnet with a 4 cm gap; its field is 20 000 gauss.

  7. Movies and Literary Elements.

    Science.gov (United States)

    Keller, Rodney D.

    1987-01-01

    Recommends using movie clips to stimulate students' interest in reading a novel as well as to teach elements of fiction such as plot, character, setting, symbol, irony, and theme. Describes each clip and provides study questions. Includes a listing of movies made from books. (NH)

  8. Elements of Social Security

    DEFF Research Database (Denmark)

    Hansen, Hans

    Elements of Social Security contains an overview of important benefit schemes in Denmark, Sweden, Finland, Germany, the Netherlands, Great Britain and Canada. The schemes are categorized according to common sets of criteria and compared. Stylized cases illustrate the impact on disposable income...

  9. Light element ceramics

    OpenAIRE

    Rao, KJ; Varma, KBR; Raju, AR

    1988-01-01

    An overview of a few structually important light element ceramics is presented. Included in the overview are silicon nitide, sialon, aluminium nitride, boron carbide and silicon carbide. Methods of preparation, characterization and industrial applications of these ceramics are summarized. Mechanical properties, industrial production techniques and principal uses of these ceramics are emphasized.

  10. Water, the intangible element

    NARCIS (Netherlands)

    Schotting, R.J.

    2009-01-01

    Water is the key to life. No living creature can survive without water. Too much water or polluted water are serious threats to mankind. Managing this intangible element is complex, not only in wet deltaic regions but also in the (semi-)arid regions of the world. Combined efforts of the hydro(geo)lo

  11. CEDS Addresses: Rubric Elements

    Science.gov (United States)

    US Department of Education, 2015

    2015-01-01

    Common Education Data Standards (CEDS) Version 4 introduced a common data vocabulary for defining rubrics in a data system. The CEDS elements support digital representations of both holistic and analytic rubrics. This document shares examples of holistic and analytic project rubrics, available CEDS Connections, and a logical model showing the…

  12. The elements of life

    Directory of Open Access Journals (Sweden)

    Sergey P. Fedotov

    2016-11-01

    Full Text Available Article "Elements of Life" offers a hypothesis about the relationship of the phenomenon of traditional Chinese medicine with the physical laws. It shows the principle of forming a sequence of daily activity of the acupuncture meridians as a consequence of the Doppler effect in the process of flowing around the planet Earth by cosmic wind (by Ether. In accordance with this specification the daily structure of meridians had been built. It is suggested that the essence of the Chinese Qi (Chi are vibrations of a certain range in the medium. Consequently, it became possible to set the interrelation of frequencies of the visible spectrum with certain meridians. It is shown that the topological relationship of ancient (barrier points of the Five Elements (Wu-Shu points are associated with the wave lengths of the so-called Qi. It is shown also that the essence of the Wu-Xing law is based on daily circulation patterns of meridians. The examples of the surrounding world, including pulses processes in the human body, are confirming the above mentioned theses. A correlation diagram between the main elements by Dr. Samohotsky A.S. (dissertation "The experience of the definition of medical laws", 1946 and the Five Elements of traditional Chinese philosophy is established. The above represented hypotheses are yet introduced in practice in form of pulse spectral analysis system.

  13. Elements of Social Security

    DEFF Research Database (Denmark)

    Hansen, Hans

    Elements of Social Security contains an overview of important benefit schemes in Denmark, Sweden, Finland, Germany, Great Britain, the Netherlands and Canada. The schemes are categorized according to common sets of criteria and compared. Stylized cases illustrate the impact on disposable income...

  14. Elements of Social Security

    DEFF Research Database (Denmark)

    Hansen, Hans

    Elements of Social Security contains an overview of important benefit schemes in Denmark, Sweden, Finland, Austria, Germany, the Netherlands, Great Britain and Canada. The schemes are categorized according to common sets of criteria and compared. Stylized cases illustrate the impact on disposable...

  15. Elemental Chem Lab

    Science.gov (United States)

    Franco Mariscal, Antonio Joaquin

    2008-01-01

    This educative material uses the symbols of 45 elements to spell the names of 32 types of laboratory equipment usually found in chemical labs. This teaching material has been divided into three puzzles according to the type of the laboratory equipment: (i) glassware as reaction vessels or containers; (ii) glassware for measuring, addition or…

  16. Reference: -300ELEMENT [PLACE

    Lifescience Database Archive (English)

    Full Text Available -300ELEMENT Kreis M, Williamson MS, Forde J, Schmitz D, Clark J, Buxton B, Pywell J..., Marris C, Henderson J, Harris N, Shewry PR, Forde BG, Miflin BJ Differential gene expression in the developing barley endosperm. Philos Trans R Soc Lond B314:355-365 (1986) ...

  17. Inside finite elements

    CERN Document Server

    Weiser, Martin

    2016-01-01

    All relevant implementation aspects of finite element methods are discussed in this book. The focus is on algorithms and data structures as well as on their concrete implementation. Theory is covered as far as it gives insight into the construction of algorithms. Throughout the exercises a complete FE-solver for scalar 2D problems will be implemented in Matlab/Octave.

  18. Multiple Segmentation of Image Stacks

    DEFF Research Database (Denmark)

    Smets, Jonathan; Jaeger, Manfred

    2014-01-01

    We propose a method for the simultaneous construction of multiple image segmentations by combining a recently proposed “convolution of mixtures of Gaussians” model with a multi-layer hidden Markov random field structure. The resulting method constructs for a single image several, alternative...... segmentations that capture different structural elements of the image. We also apply the method to collections of images with identical pixel dimensions, which we call image stacks. Here it turns out that the method is able to both identify groups of similar images in the stack, and to provide segmentations...

  19. Vibration Analysis of Plates by MLS-Element Method

    Science.gov (United States)

    Zhou, L.; Xiang, Y.

    2010-05-01

    This paper presents a novel numerical method, the moving least square element (MLS-element) method for the free vibration analysis of plates based on the Mindlin shear deformable plate theory. In the MLS-element method, a plate can be first divided into multiple elements which are connected through selected nodal points on the interfaces of the elements. An element can be of any shape and the size of the element varies dependent on the problem at hand. The shape functions of the element for the transverse displacement and the rotations are derived based on the MLS interpolation technique. The convergence and accuracy of the method can be controlled by either increasing the number of elements or by increasing the number of MLS interpolation points within elements. Two selected examples for vibration of a simply supported square Mindlin plate and a clamped L-shaped Mindlin plate are studied to illustrate the versatility and accuracy of the proposed method. It shows that the proposed method is highly accurate and flexible for the vibration analysis of plate problems. The method can be further developed to bridge the existing meshless method and the powerful finite element method in dealing with various engineering computational problems, such as large deformation and crack propagation in solid mechanics.

  20. Repetitive Elements in Mycoplasma hyopneumoniae Transcriptional Regulation

    Science.gov (United States)

    Cattani, Amanda Malvessi; Siqueira, Franciele Maboni; Guedes, Rafael Lucas Muniz; Schrank, Irene Silveira

    2016-01-01

    Transcriptional regulation, a multiple-step process, is still poorly understood in the important pig pathogen Mycoplasma hyopneumoniae. Basic motifs like promoters and terminators have already been described, but no other cis-regulatory elements have been found. DNA repeat sequences have been shown to be an interesting potential source of cis-regulatory elements. In this work, a genome-wide search for tandem and palindromic repetitive elements was performed in the intergenic regions of all coding sequences from M. hyopneumoniae strain 7448. Computational analysis demonstrated the presence of 144 tandem repeats and 1,171 palindromic elements. The DNA repeat sequences were distributed within the 5’ upstream regions of 86% of transcriptional units of M. hyopneumoniae strain 7448. Comparative analysis between distinct repetitive sequences found in related mycoplasma genomes demonstrated different percentages of conservation among pathogenic and nonpathogenic strains. qPCR assays revealed differential expression among genes showing variable numbers of repetitive elements. In addition, repeats found in 206 genes already described to be differentially regulated under different culture conditions of M. hyopneumoniae strain 232 showed almost 80% conservation in relation to M. hyopneumoniae strain 7448 repeats. Altogether, these findings suggest a potential regulatory role of tandem and palindromic DNA repeats in the M. hyopneumoniae transcriptional profile. PMID:28005945

  1. Element-topology-independent preconditioners for parallel finite element computations

    Science.gov (United States)

    Park, K. C.; Alexander, Scott

    1992-01-01

    A family of preconditioners for the solution of finite element equations are presented, which are element-topology independent and thus can be applicable to element order-free parallel computations. A key feature of the present preconditioners is the repeated use of element connectivity matrices and their left and right inverses. The properties and performance of the present preconditioners are demonstrated via beam and two-dimensional finite element matrices for implicit time integration computations.

  2. Element-topology-independent preconditioners for parallel finite element computations

    Science.gov (United States)

    Park, K. C.; Alexander, Scott

    1992-01-01

    A family of preconditioners for the solution of finite element equations are presented, which are element-topology independent and thus can be applicable to element order-free parallel computations. A key feature of the present preconditioners is the repeated use of element connectivity matrices and their left and right inverses. The properties and performance of the present preconditioners are demonstrated via beam and two-dimensional finite element matrices for implicit time integration computations.

  3. Fast Output-sensitive Matrix Multiplication

    DEFF Research Database (Denmark)

    Jacob, Riko; Stöckel, Morten

    2015-01-01

    We consider the problem of multiplying two $U \\times U$ matrices $A$ and $C$ of elements from a field $\\F$. We present a new randomized algorithm that can use the known fast square matrix multiplication algorithms to perform fewer arithmetic operations than the current state of the art for output...

  4. Fast output-sensitive matrix multiplication

    DEFF Research Database (Denmark)

    Jacob, Riko; Stöckel, Morten

    2015-01-01

    We consider the problem of multiplying two $U \\times U$ matrices $A$ and $C$ of elements from a field $\\F$. We present a new randomized algorithm that can use the known fast square matrix multiplication algorithms to perform fewer arithmetic operations than the current state of the art for output...

  5. Four-terminal circuit element with photonic core

    Science.gov (United States)

    Sampayan, Stephen

    2017-08-29

    A four-terminal circuit element is described that includes a photonic core inside of the circuit element that uses a wide bandgap semiconductor material that exhibits photoconductivity and allows current flow through the material in response to the light that is incident on the wide bandgap material. The four-terminal circuit element can be configured based on various hardware structures using a single piece or multiple pieces or layers of a wide bandgap semiconductor material to achieve various designed electrical properties such as high switching voltages by using the photoconductive feature beyond the breakdown voltages of semiconductor devices or circuits operated based on electrical bias or control designs. The photonic core aspect of the four-terminal circuit element provides unique features that enable versatile circuit applications to either replace the semiconductor transistor-based circuit elements or semiconductor diode-based circuit elements.

  6. System and method for detecting components of a mixture including tooth elements for alignment

    Energy Technology Data Exchange (ETDEWEB)

    Sommer, Gregory Jon; Schaff, Ulrich Y.

    2016-11-22

    Examples are described including assay platforms having tooth elements. An impinging element may sequentially engage tooth elements on the assay platform to sequentially align corresponding detection regions with a detection unit. In this manner, multiple measurements may be made of detection regions on the assay platform without necessarily requiring the starting and stopping of a motor.

  7. Elements of quantum optics

    CERN Document Server

    Meystre, Pierre

    2007-01-01

    Elements of Quantum Optics gives a self-contained and broad coverage of the basic elements necessary to understand and carry out research in laser physics and quantum optics, including a review of basic quantum mechanics and pedagogical introductions to system-reservoir interactions and to second quantization. The text reveals the close connection between many seemingly unrelated topics, such as probe absorption, four-wave mixing, optical instabilities, resonance fluorescence and squeezing. It also comprises discussions of cavity quantum electrodynamics and atom optics. The 4th edition includes a new chapter on quantum entanglement and quantum information, as well as added discussions of the quantum beam splitter, electromagnetically induced transparency, slow light, and the input-output formalism needed to understand many problems in quantum optics. It also provides an expanded treatment of the minimum-coupling Hamiltonian and a simple derivation of the Gross-Pitaevskii equation, an important gateway to rese...

  8. Elements of String Cosmology

    Science.gov (United States)

    Gasperini, Maurizio

    2011-03-01

    Preface; Acknowledgements; Notation, units and conventions; 1. A short review of standard and inflationary cosmology; 2. The basic string cosmology equations; 3. Conformal invariance and string effective action; 4. Duality symmetries and cosmological solutions; 5. Inflationary kinematics; 6. The string phase; 7. The cosmic background of relic gravitational waves; 8. Scalar perturbations and the anisotropy of the CMB radiation; 9. Dilaton phenomenology; 10. Elements of brane cosmology; Index.

  9. Quantum theory elements

    CERN Document Server

    Bates, David Robert

    1962-01-01

    Quantum Theory: A Treatise in Three Volumes, I: Elements focuses on the principles, methodologies, and approaches involved in quantum theory, including quantum mechanics, linear combinations, collisions, and transitions. The selection first elaborates on the fundamental principles of quantum mechanics, exactly soluble bound state problems, and continuum. Discussions focus on delta function normalization, spherically symmetric potentials, rectangular potential wells, harmonic oscillators, spherically symmetrical potentials, Coulomb potential, axiomatic basis, consequences of first three postula

  10. Nuclear fuel element

    Science.gov (United States)

    Meadowcroft, Ronald Ross; Bain, Alastair Stewart

    1977-01-01

    A nuclear fuel element wherein a tubular cladding of zirconium or a zirconium alloy has a fission gas plenum chamber which is held against collapse by the loops of a spacer in the form of a tube which has been deformed inwardly at three equally spaced, circumferential positions to provide three loops. A heat resistant disc of, say, graphite separates nuclear fuel pellets within the cladding from the plenum chamber. The spacer is of zirconium or a zirconium alloy.

  11. A sealing element

    Energy Technology Data Exchange (ETDEWEB)

    Obi, F.; Takada, K.

    1983-09-22

    A sealing lining made of a mixture of polyethylene or polypropylene with an additive which prevents destruction of the lining is used in the element. The content of the additive in the mixture is 10 to 30 percent by mass. The additive basically consists of polyethylene. Carboxyl groups are introduced into the polymer as an anion and sodium, potassium and molybdenum are introduced as the cation.

  12. New Aperture Partitioning Element

    Science.gov (United States)

    Griffin, S.; Calef, B.; Williams, S.

    Postprocessing in an optical system can be aided by adding an optical element to partition the pupil into a number of segments. When imaging through the atmosphere, the recorded data are blurred by temperature-induced variations in the index of refraction along the line of sight. Using speckle imaging techniques developed in the astronomy community, this blurring can be corrected to some degree. The effectiveness of these techniques is diminished by redundant baselines in the pupil. Partitioning the pupil reduces the degree of baseline redundancy, and therefore improves the quality of images that can be obtained from the system. It is possible to implement the described approach on an optical system with a segmented primary mirror, but not very practical. This is because most optical systems do not have segmented primary mirrors, and those that do have relatively low bandwidth positioning of segments due to their large mass and inertia. It is much more practical to position an active aperture partitioning element at an aft optics pupil of the optical system. This paper describes the design, implementation and testing of a new aperture partitioning element that is completely reflective and reconfigurable. The device uses four independent, annular segments that can be positioned with a high degree of accuracy without impacting optical wavefront of each segment. This mirror has been produced and is currently deployed and working on the 3.6 m telescope.

  13. Helium the disappearing element

    CERN Document Server

    Sears, Wheeler M

    2015-01-01

    The subject of the book is helium, the element, and its use in myriad applications including MRI machines, particle accelerators, space telescopes, and of course balloons and blimps. It was at the birth of our Universe, or the Big Bang, where the majority of cosmic helium was created; and stellar helium production continues. Although helium is the second most abundant element in the Universe, it is actually quite rare here on Earth and only exists because of radioactive elements deep within the Earth. This book includes a detailed history of the discovery of helium, of the commercial industry built around it, how the helium we actually encounter is produced within the Earth, and the state of the helium industry today. The gas that most people associate with birthday party balloons is running out. “Who cares?” you might ask. Well, without helium, MRI machines could not function, rockets could not go into space, particle accelerators such as those used by CERN could not operate, fiber optic cables would not...

  14. The multiplicity of Brazilian Social Psychology

    Directory of Open Access Journals (Sweden)

    Mariana Prioli Cordeiro

    2014-02-01

    Full Text Available Brazilian Social Psychology has many definitions, theories and objects of study. In this essay, based on Actor-Network Theory, we argue that these are not different aspects or attributes of a single object, but elements that help to perform different versions of this object. They are, therefore, elements that make Social Psychologies different, although related to each other. They produce a multiple Social Psychology, which is more than one and, at the same time, less than many. In doing so, we strived to call attention to the possibility of ordinating and coordinating reality in different ways, of recognizing that there are multiple and diverse actants in a discipline and of making a Social Psychology that searches for complex connections that articulate humans and non-humans and perform multiple realities.

  15. Students' understandings of multiplication

    OpenAIRE

    2016-01-01

    Multiplicative reasoning permeates many mathematical topics, for example fractions and functions. Hence there is consensus on the importance of acquiring multiplicative reasoning. Multiplication is typically introduced as repeated addition, but when it is extended to include multi-digits and decimals a more general view of multiplication is required. There are conflicting reports in previous research concerning students’ understandings of multiplication. For example, repeated addition has bee...

  16. The transuranium elements: From neptunium and plutonium to element 112

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, D.C. [California Univ., Berkeley, CA (United States)]|[Lawrence Livermore National Lab., CA (United States)

    1996-07-26

    Beginning in the 1930`s, both chemists and physicists became interested in synthesizing new artificial elements. The first transuranium element, Np, was synthesized in 1940. Over the past six decades, 20 transuranium elements have been produced. A review of the synthesis is given. The procedure of naming the heavy elements is also discussed. It appears feasible to produce elements 113 and 114. With the Berkeley Gas-filled Separator, it should be possible to reach the superheavy elements in the region of the spherical Z=114 shell, but with fewer neutrons than the N=184 spherical shell. 57 refs, 6 figs.

  17. Genetic elements of plant viruses as tools for genetic engineering.

    OpenAIRE

    Mushegian, A R; Shepherd, R J

    1995-01-01

    Viruses have developed successful strategies for propagation at the expense of their host cells. Efficient gene expression, genome multiplication, and invasion of the host are enabled by virus-encoded genetic elements, many of which are well characterized. Sequences derived from plant DNA and RNA viruses can be used to control expression of other genes in vivo. The main groups of plant virus genetic elements useful in genetic engineering are reviewed, including the signals for DNA-dependent a...

  18. Method of securing filter elements

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Erik P.; Haslam, Jeffery L.; Mitchell, Mark A.

    2016-10-04

    A filter securing system including a filter unit body housing; at least one tubular filter element positioned in the filter unit body housing, the tubular filter element having a closed top and an open bottom; a dimple in either the filter unit body housing or the top of the tubular filter element; and a socket in either the filter unit body housing or the top of the tubular filter element that receives the dimple in either the filter unit body housing or the top of the tubular filter element to secure the tubular filter element to the filter unit body housing.

  19. It is elemental

    DEFF Research Database (Denmark)

    Delgado-Baquerizo, Manuel; Reich, Peter B.; Khachane, Amit N.

    2017-01-01

    It is well established that resource quantity and elemental stoichiometry play major roles in shaping below and aboveground plant biodiversity, but their importance for shaping microbial diversity in soil remains unclear. Here, we used statistical modeling on a regional database covering 179...... diversity and composition were primarily driven by variation in soil resource stoichiometry (total C:N:P ratios), itself linked to different land uses, and secondarily driven by other important biodiversity drivers such as climate, soil spatial heterogeneity, soil pH, root influence (plant-soil microbe...

  20. Elements of energy conversion

    CERN Document Server

    Russell, Charles R

    2013-01-01

    Elements of Energy Conversion brings together scattered information on the subject of energy conversion and presents it in terms of the fundamental thermodynamics that apply to energy conversion by any process. Emphasis is given to the development of the theory of heat engines because these are and will remain most important power sources. Descriptive material is then presented to provide elementary information on all important energy conversion devices. The book contains 10 chapters and opens with a discussion of forms of energy, energy sources and storage, and energy conversion. This is foll

  1. Osteoporosis and trace elements

    DEFF Research Database (Denmark)

    Aaseth, J.; Boivin, G.; Andersen, Ole

    2012-01-01

    More than 200 million people are affected by osteoporosis worldwide, as estimated by 2 million annual hip fractures and other debilitating bone fractures (vertebrae compression and Colles' fractures). Osteoporosis is a multi-factorial disease with potential contributions from genetic, endocrine...... in new bone and results in a net gain in bone mass, but may be associated with a tissue of poor quality. Aluminum induces impairment of bone formation. Gallium and cadmium suppresses bone turnover. However, exact involvements of the trace elements in osteoporosis have not yet been fully clarified...

  2. Elements of real analysis

    CERN Document Server

    Sprecher, David A

    2010-01-01

    This classic text in introductory analysis delineates and explores the intermediate steps between the basics of calculus and the ultimate stage of mathematics: abstraction and generalization.Since many abstractions and generalizations originate with the real line, the author has made it the unifying theme of the text, constructing the real number system from the point of view of a Cauchy sequence (a step which Dr. Sprecher feels is essential to learn what the real number system is).The material covered in Elements of Real Analysis should be accessible to those who have completed a course in

  3. Elements of analytical dynamics

    CERN Document Server

    Kurth, Rudolph; Stark, M

    1976-01-01

    Elements of Analytical Dynamics deals with dynamics, which studies the relationship between motion of material bodies and the forces acting on them. This book is a compilation of lectures given by the author at the Georgia and Institute of Technology and formed a part of a course in Topological Dynamics. The book begins by discussing the notions of space and time and their basic properties. It then discusses the Hamilton-Jacobi theory and Hamilton's principle and first integrals. The text concludes with a discussion on Jacobi's geometric interpretation of conservative systems. This book will

  4. Analytical elements of mechanics

    CERN Document Server

    Kane, Thomas R

    2013-01-01

    Analytical Elements of Mechanics, Volume 1, is the first of two volumes intended for use in courses in classical mechanics. The books aim to provide students and teachers with a text consistent in content and format with the author's ideas regarding the subject matter and teaching of mechanics, and to disseminate these ideas. The book opens with a detailed exposition of vector algebra, and no prior knowledge of this subject is required. This is followed by a chapter on the topic of mass centers, which is presented as a logical extension of concepts introduced in connection with centroids. A

  5. [Healthcare marketing elements].

    Science.gov (United States)

    Ameri, Cinzia; Fiorini, Fulvio

    2014-01-01

    Marketing puts its foundation on a few key concepts: need-demand, product-service, satisfaction, exchange, market, or business structure manufacturing / supply. The combination of these elements allows you to build an effective marketing strategy. Crucial in this respect is to remember the Porter matrix, which shows that for a correct analysis of the relevant market is necessary to refer to the "five forces at play", ie: customers, competitors, new entrants and substitutes threat. Another key lever for proper marketing oriented approach is the continuous and constant monitoring of the application, anticipating their dissatisfactions.

  6. Elements of Architecture

    DEFF Research Database (Denmark)

    Elements of Architecture explores new ways of engaging architecture in archaeology. It conceives of architecture both as the physical evidence of past societies and as existing beyond the physical environment, considering how people in the past have not just dwelled in buildings but have existed...... and affective impacts, of these material remains. The contributions in this volume investigate the way time, performance and movement, both physically and emotionally, are central aspects of understanding architectural assemblages. It is a book about the constellations of people, places and things that emerge...

  7. Ring-laser gyroscope system using dispersive element(s)

    Science.gov (United States)

    Smith, David D. (Inventor)

    2010-01-01

    A ring-laser gyroscope system includes a ring-laser gyroscope (RLG) and at least one dispersive element optically coupled to the RLG's ring-shaped optical path. Each dispersive element has a resonant frequency that is approximately equal to the RLG's lasing frequency. A group index of refraction defined collectively by the dispersive element(s) has (i) a real portion that is greater than zero and less than one, and (ii) an imaginary portion that is less than zero.

  8. Multiple-Ring Digital Communication Network

    Science.gov (United States)

    Kirkham, Harold

    1992-01-01

    Optical-fiber digital communication network to support data-acquisition and control functions of electric-power-distribution networks. Optical-fiber links of communication network follow power-distribution routes. Since fiber crosses open power switches, communication network includes multiple interconnected loops with occasional spurs. At each intersection node is needed. Nodes of communication network include power-distribution substations and power-controlling units. In addition to serving data acquisition and control functions, each node acts as repeater, passing on messages to next node(s). Multiple-ring communication network operates on new AbNET protocol and features fiber-optic communication.

  9. Tipping elements in the Arctic marine ecosystem.

    Science.gov (United States)

    Duarte, Carlos M; Agustí, Susana; Wassmann, Paul; Arrieta, Jesús M; Alcaraz, Miquel; Coello, Alexandra; Marbà, Núria; Hendriks, Iris E; Holding, Johnna; García-Zarandona, Iñigo; Kritzberg, Emma; Vaqué, Dolors

    2012-02-01

    The Arctic marine ecosystem contains multiple elements that present alternative states. The most obvious of which is an Arctic Ocean largely covered by an ice sheet in summer versus one largely devoid of such cover. Ecosystems under pressure typically shift between such alternative states in an abrupt, rather than smooth manner, with the level of forcing required for shifting this status termed threshold or tipping point. Loss of Arctic ice due to anthropogenic climate change is accelerating, with the extent of Arctic sea ice displaying increased variance at present, a leading indicator of the proximity of a possible tipping point. Reduced ice extent is expected, in turn, to trigger a number of additional tipping elements, physical, chemical, and biological, in motion, with potentially large impacts on the Arctic marine ecosystem.

  10. Element stacking method for topology optimization with material-dependent boundary and loading conditions

    DEFF Research Database (Denmark)

    Yoon, Gil Ho; Park, Y.K.; Kim, Y.Y.

    2007-01-01

    A new topology optimization scheme, called the element stacking method, is developed to better handle design optimization involving material-dependent boundary conditions and selection of elements of different types. If these problems are solved by existing standard approaches, complicated finite...... element models or topology optimization reformulation may be necessary. The key idea of the proposed method is to stack multiple elements on the same discretization pixel and select a single or no element. In this method, stacked elements on the same pixel have the same coordinates but may have...

  11. NIH Common Data Elements Repository

    Data.gov (United States)

    U.S. Department of Health & Human Services — The NIH Common Data Elements (CDE) Repository has been designed to provide access to structured human and machine-readable definitions of data elements that have...

  12. An efficient rectangular plate element

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A new 12-parameter rectangular plate element is presented by useof the double set parameter method. The error in the energy norm is of order O(h2), one order higher than the commonly used Adini nonconforming element.

  13. Nonabelian Multiplicative Integration on Surfaces

    CERN Document Server

    Yekutieli, Amnon

    2010-01-01

    We construct a 2-dimensional twisted nonabelian multiplicative integral. This is done in the context of a Lie crossed module (an object composed of two Lie groups interacting), and a pointed manifold. The integrand is a connection-curvature pair, that consists of a Lie algebra valued 1-form and a Lie algebra valued 2-form, satisfying a certain differential equation. The geometric cycle of the integration is a kite in the pointed manifold. A kite is made up of a 2-dimensional simplex in the manifold, together with a path connecting this simplex to the base point of the manifold. The multiplicative integral is an element of the second Lie group in the crossed module. We prove several properties of the multiplicative integral. Among them is the 2-dimensional nonabelian Stokes Theorem, which is a generalization of Schlesinger's Theorem. Our main result is the 3-dimensional nonabelian Stokes Theorem. This is a totally new result. The methods we used are: the CBH Theorem for the nonabelian exponential map; piecewis...

  14. ALICE Forward Multiplicity Detector

    CERN Multimedia

    Christensen, C

    2013-01-01

    The Forward Multiplicity Detector (FMD) extends the coverage for multiplicity of charge particles into the forward regions - giving ALICE the widest coverage of the 4 LHC experiments for these measurements.

  15. Multiple sclerosis - discharge

    Science.gov (United States)

    ... Symptoms of Multiple Sclerosis . 6th ed. Philadelphia, PA: Springer Demos; 2014. Read More Multiple sclerosis Neurogenic bladder ... medical conditions. Call 911 for all medical emergencies. Links to other sites are provided for information only -- ...

  16. National Multiple Sclerosis Society

    Science.gov (United States)

    ... Join the Community Stay Informed Corporate Support National Multiple Sclerosis Society Meet the Challenge to end MS Give ... in MS Research November 2, 2016 View All Multiple Sclerosis News & Press View All Clinical Trial Alerts Every ...

  17. Generalized internal multiple imaging

    KAUST Repository

    Zuberi, Mohammad Akbar Hosain

    2014-12-04

    Various examples are provided for generalized internal multiple imaging (GIMI). In one example, among others, a method includes generating a higher order internal multiple image using a background Green\\'s function and rendering the higher order internal multiple image for presentation. In another example, a system includes a computing device and a generalized internal multiple imaging (GIMI) application executable in the computing device. The GIMI application includes logic that generates a higher order internal multiple image using a background Green\\'s function and logic that renders the higher order internal multiple image for display on a display device. In another example, a non-transitory computer readable medium has a program executable by processing circuitry that generates a higher order internal multiple image using a background Green\\'s function and renders the higher order internal multiple image for display on a display device.

  18. Bed Bugs - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Bed Bugs URL of this page: https://medlineplus.gov/languages/ ... V W XYZ List of All Topics All Bed Bugs - Multiple Languages To use the sharing features on ...

  19. Multiple System Atrophy (MSA)

    Science.gov (United States)

    Diseases and Conditions Multiple system atrophy (MSA) By Mayo Clinic Staff Multiple system atrophy (MSA) is a rare neurological disorder that impairs your body's involuntary (autonomic) functions, including blood ...

  20. Students' Difficulties with Equations involving Circuit Elements

    CERN Document Server

    Li, Jing

    2016-01-01

    We discuss an investigation exploring students' difficulties with equations involving resistance, capacitance and inductance. We find that introductory physics students have great difficulty understanding, e.g., how the resistance of an ohmic resistor can be written in terms of the potential difference across it and the current through it, but it does not change when the potential difference across the resistor is varied. Similar confusions arose in problems relating to capacitors and inductors. We discuss these difficulties with equations in the context of introductory physics students' performance on questions about circuit elements both in the free-response and multiple-choice formats.

  1. Microelectromechanical resonator based digital logic elements

    KAUST Repository

    Hafiz, Md Abdullah Al

    2016-10-20

    Micro/nano-electromechanical resonator based mechanical computing has recently attracted significant attention. However, its full realization has been hindered by the difficulty in realizing complex combinational logics, in which the logic function is constructed by cascading multiple smaller logic blocks. In this work we report an alternative approach for implementation of digital logic core elements, multiplexer and demultiplexer, which can be used to realize combinational logic circuits by suitable concatenation. Toward this, shallow arch shaped microresonators are electrically connected and their resonance frequencies are tuned based on an electrothermal frequency modulation scheme. This study demonstrates that by reconfiguring the same basic building block, the arch microresonator, complex logic circuits can be realized.

  2. Trace element emissions from coal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-15

    Trace elements are emitted during coal combustion. The quantity, in general, depends on the physical and chemical properties of the element itself, the concentration of the element in the coal, the combustion conditions and the type of particulate control device used, and its collection efficiency as a function of particle size. Some trace elements become concentrated in certain particle streams following combustion such as bottom ash, fly ash, and flue gas particulate matter, while others do not. Various classification schemes have been developed to describe this partitioning behaviour. These classification schemes generally distinguish between: Class 1: elements that are approximately equally concentrated in the fly ash and bottom ash, or show little or no fine particle enrichment, examples include Mn, Be, Co and Cr; Class 2: elements that are enriched in the fly ash relative to bottom ash, or show increasing enrichment with decreasing particle size, examples include As, Cd, Pb and Sb; Class 3: elements which are emitted in the gas phase (primarily Hg (not discussed in this review), and in some cases, Se). Control of class 1 trace elements is directly related to control of total particulate matter emissions, while control of the class 2 elements depends on collection of fine particulates. Due to the variability in particulate control device efficiencies, emission rates of these elements can vary substantially. The volatility of class 3 elements means that particulate controls have only a limited impact on the emissions of these elements.

  3. REACTOR FUEL ELEMENTS TESTING CONTAINER

    Science.gov (United States)

    Whitham, G.K.; Smith, R.R.

    1963-01-15

    This patent shows a method for detecting leaks in jacketed fuel elements. The element is placed in a sealed tank within a nuclear reactor, and, while the reactor operates, the element is sparged with gas. The gas is then led outside the reactor and monitored for radioactive Xe or Kr. (AEC)

  4. Neutron Multiplicity Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Frame, Katherine Chiyoko [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-06-28

    Neutron multiplicity measurements are widely used for nondestructive assay (NDA) of special nuclear material (SNM). When combined with isotopic composition information, neutron multiplicity analysis can be used to estimate the spontaneous fission rate and leakage multiplication of SNM. When combined with isotopic information, the total mass of fissile material can also be determined. This presentation provides an overview of this technique.

  5. Free Material Design with Multiple Load Cases

    DEFF Research Database (Denmark)

    Pedersen, Pauli; Pedersen, Niels Leergaard

    2012-01-01

    with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation......Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...

  6. Free Material Design with Multiple Load Cases

    DEFF Research Database (Denmark)

    Pedersen, Pauli; Pedersen, Niels Leergaard

    2012-01-01

    Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...... with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation...

  7. ELEMENTAL FORMS OF HOSPITALITY

    Directory of Open Access Journals (Sweden)

    Maximiliano Emanuel Korstanje

    2010-11-01

    Full Text Available Modern studies emphasized on the needs of researching the hospitality as relevant aspects of tourism and hospitality fields. Anyway, these approaches are inextricably intertwined to the industry of tourism and do not take seriously the anthropological and sociological roots of hospitality. In fact, the hotel seems to be a partial sphere of hospitality at all. Under this context, the present paper explores the issue of hospitality enrooted in the political and economic indo-European principle of free-transit which is associated to a much broader origin.  Starting from the premise etymologically hostel and hospital share similar origins, we follow the contributions of J Derrida to determine the elements that formed the hospitality up to date.

  8. COLOR- SENSITIZED SOLAR ELEMENTS

    Directory of Open Access Journals (Sweden)

    Gish R. A.

    2016-05-01

    Full Text Available Photovoltaic devices are a promising solution to the energy crisis, because they generate electricity directly from sunlight, without producing CO2. While color-sensitized batteries are the most studied element, mainly due to its low cost and high efficiency solar energy conversion into electricity. Until recently, the color-sensitized solar cells performance was less than 1%, however, the use of titanium dioxide as the anode material have greatly raised their efficiency. The advantages of titanium dioxide is primarily in the low cost, but its use provides high light capture efficiency, with external quantum efficiency (efficiency incident photon - charge, usually in the range of 60-90% using nanocrystal forms in comparison with

  9. Ucla, escuela elemental

    Directory of Open Access Journals (Sweden)

    Neutra, Richard J.

    1962-03-01

    Full Text Available La Escuela Elemental de Preparación de la Universidad de California, en Los Angeles, está dedicada a la educación e investigación y preparación del profesorado de la infancia. Se ha construido en un paraje maravilloso, de frondosa vegetación, frente a un terreno bastante quebrado, circunstancia que presta mayor encanto al conjunto, construido con gran pericia y adaptación al paisaje a base de una dominante horizontalidad, con materiales sencillos (ladrillos, hierro y madera y gran comunicación con la naturaleza mediante grandes cristaleras correderas que ensanchan las clases y las suplementan hacia el jardín de acuerdo con las nuevas normas y prácticas docentes.

  10. The fantastic four.. elements

    Science.gov (United States)

    Marsili, Antonella; D'Addezio, Giuliana; Rubbia, Giuliana; Ramieri, Caterina; Todaro, Riccardo; Scipilliti, Francesca; Tosto, Eleonora

    2015-04-01

    With a "Sunday between territory and music to 'National Institute of Geophysics and Volcanology," October 12, 2014 the headquarters of INGV Roma kicked off the activities of the second edition of the Week of Planet Earth. The laboratory of scientific outreach and museum activities together with volunteers of the National Civil Service have organized the whole day dedicated to the dissemination of earth sciences, involving adults and children. Especially for primary school children a laboratory was made involving three amusing activities all aimed at inspiring respect for the Earth: a theatrical representation called "The Fantastic 4... elements", a behavioral game and a nursery rhyme reading. The theater as a means of communication of science is an innovative and creative way to introduce children to important scientific concepts. The use of this methodology and simple language favoring the emotional involvement of the child facilitating learning. The main character is a child, chosen to facilitate the identification of the spectators with the protagonist, that through a fantastic journey discovers the importance of the four elements of our planet: earth, fire, air and water. As a second step, volunteers involved children in reading a nursery rhyme "the ABC to become a Friend of the Earth" inviting them to protect and respect the environment and its resources. Finally, the behavioral game gave indications about behaviors to adopt to safeguard the planet. Volunteers introduced a billboard divided into two colors, green to indicate the right behaviors and red for the wrong ones. Each child, after reading a card with indication on the behavior to adopt, had to decide if they were correct or not with respect to the environment safeguard. After listening to the children's answer, the volunteer gave the correct explanation about the appropriate behavior to adopt. At the end of the activities, each child received a certificate as "a friend of Planet Earth".

  11. Do Multiple Solutions Matter? Prompting Multiple Solutions, Interest, Competence, and Autonomy

    Science.gov (United States)

    Schukajlow, Stanislaw; Krug, André

    2014-01-01

    Encouraging students to develop multiple solutions for given problems is an important way to improve mathematical knowledge. However, the influence of this teaching element on students' interest-related motivational orientations is an open question. In this article, we report the results of an experimental study (N = 145) that was carried out to…

  12. An element by element spectral element method for elastic wave modeling

    Institute of Scientific and Technical Information of China (English)

    LIN Weijun; WANG Xiuming; ZHANG Hailan

    2006-01-01

    The spectral element method which combines the advantages of spectral method with those of finite element method,provides an efficient tool in simulating elastic wave equation in complex medium. Based on weak form of elastodynamic equations, mathematical formulations for Legendre spectral element method are presented. The wave field on an element is discretized using high-order Lagrange interpolation, and integration over the element is accomplished based upon the Gauss-Lobatto-Legendre integration rule. This results in a diagonal mass matrix which leads to a greatly simplified algorithm. In addition, the element by element technique is introduced in our method to reduce the memory sizes and improve the computation efficiency. Finally, some numerical examples are presented to demonstrate the spectral accuracy and the efficiency. Because of combinations of the finite element scheme and spectral algorithms, this method can be used for complex models, including free surface boundaries and strong heterogeneity.

  13. Novel high-performance element in the electromagnetic finite-element method--node-edge element

    Institute of Scientific and Technical Information of China (English)

    Sheng Xinqing; Peng Zhen

    2008-01-01

    It is known in the computational electromagnetics (CEM) that the node element has a relative well-conditioned matrix,but suffers from the spurious solution problem; whereas the edge element has no spurious solutions,but usually produces an ill-conditioned matrix.Particularly,when the mesh is over dense,the iterative solution of the matrix equation from edge element converges very slowly.Based on the node element and edge element,a node-edge element is presented,which has no spurious solutions and better-conditioned matrix.Numerical experiments demonstrate that the proposed node-edge element is more efficient than now-widely used edge element.

  14. Core-Mantle Partitioning of Volatile Elements and the Origin of Volatile Elements in Earth and Moon

    Science.gov (United States)

    Righter, K.; Pando, K.; Danielson, L.; Nickodem, K.

    2014-01-01

    Depletions of siderophile elements in mantles have placed constraints on the conditions on core segregation and differentiation in bodies such as Earth, Earth's Moon, Mars, and asteroid 4 Vesta. Among the siderophile elements there are a sub-set that are also volatile (volatile siderophile elements or VSE; Ga, Ge, In, As, Sb, Sn, Bi, Zn, Cu, Cd), and thus can help to constrain the origin of volatile elements in these bodies, and in particular the Earth and Moon. One of the fundamental observations of the geochemistry of the Moon is the overall depletion of volatile elements relative to the Earth, but a satisfactory explanation has remained elusive. Hypotheses for Earth include addition during accretion and core formation and mobilized into the metallic core, multiple stage origin, or addition after the core formed. Any explanation for volatile elements in the Earth's mantle must also be linked to an explanation of these elements in the lunar mantle. New metal-silicate partitioning data will be applied to the origin of volatile elements in both the Earth and Moon, and will evaluate theories for exogenous versus endogenous origin of volatile elements.

  15. Method and systems for collecting data from multiple fields of view

    Science.gov (United States)

    Schwemmer, Geary K. (Inventor)

    2002-01-01

    Systems and methods for processing light from multiple fields (48, 54, 55) of view without excessive machinery for scanning optical elements. In an exemplary embodiment of the invention, multiple holographic optical elements (41, 42, 43, 44, 45), integrated on a common film (4), diffract and project light from respective fields of view.

  16. The Chemistry of Superheavy Elements

    CERN Document Server

    Schädel, M

    2003-01-01

    The chemistry of transactinide or superheavy elements has reached element 108. Preparations are under way to leap to element 112 and beyond. The current status of this atom-at-a-time chemical research and its future perspectives are reviewed from an experimental point of view together with some of the interesting results from n -rich nuclides near and at the N=162 neutron shell. Experimental techniques and important results enlightening typical chemical properties of elements 104 through 108 are presented in an exemplary way. From the results of these experiments it is justified to place these elements in the Periodic Table of the Elements in to groups 4 through 8, respectively. However, mainly due to the influence of relativistic effects, it is no longer possible to deduce detailed chemical properties of these superheavy elements simply from this position.

  17. Exploring functional elements and genomic variation in the noncoding genome

    NARCIS (Netherlands)

    van Heesch, S.A.A.C.

    2014-01-01

    Gene expression regulation is a delicate process that depends on multiple aspects including genome structure and transcription factor binding to DNA elements. The majority of our genome consists of noncoding DNA, which was shown to be crucial in providing the correct context for genome function. Alt

  18. Exploring functional elements and genomic variation in the noncoding genome

    NARCIS (Netherlands)

    van Heesch, S.A.A.C.|info:eu-repo/dai/nl/336463286

    2014-01-01

    Gene expression regulation is a delicate process that depends on multiple aspects including genome structure and transcription factor binding to DNA elements. The majority of our genome consists of noncoding DNA, which was shown to be crucial in providing the correct context for genome function. Alt

  19. Matrix multiplication operations with data pre-conditioning in a high performance computing architecture

    Science.gov (United States)

    Eichenberger, Alexandre E; Gschwind, Michael K; Gunnels, John A

    2013-11-05

    Mechanisms for performing matrix multiplication operations with data pre-conditioning in a high performance computing architecture are provided. A vector load operation is performed to load a first vector operand of the matrix multiplication operation to a first target vector register. A load and splat operation is performed to load an element of a second vector operand and replicating the element to each of a plurality of elements of a second target vector register. A multiply add operation is performed on elements of the first target vector register and elements of the second target vector register to generate a partial product of the matrix multiplication operation. The partial product of the matrix multiplication operation is accumulated with other partial products of the matrix multiplication operation.

  20. Chemistry of the superheavy elements.

    Science.gov (United States)

    Schädel, Matthias

    2015-03-13

    The quest for superheavy elements (SHEs) is driven by the desire to find and explore one of the extreme limits of existence of matter. These elements exist solely due to their nuclear shell stabilization. All 15 presently 'known' SHEs (11 are officially 'discovered' and named) up to element 118 are short-lived and are man-made atom-at-a-time in heavy ion induced nuclear reactions. They are identical to the transactinide elements located in the seventh period of the periodic table beginning with rutherfordium (element 104), dubnium (element 105) and seaborgium (element 106) in groups 4, 5 and 6, respectively. Their chemical properties are often surprising and unexpected from simple extrapolations. After hassium (element 108), chemistry has now reached copernicium (element 112) and flerovium (element 114). For the later ones, the focus is on questions of their metallic or possibly noble gas-like character originating from interplay of most pronounced relativistic effects and electron-shell effects. SHEs provide unique opportunities to get insights into the influence of strong relativistic effects on the atomic electrons and to probe 'relativistically' influenced chemical properties and the architecture of the periodic table at its farthest reach. In addition, they establish a test bench to challenge the validity and predictive power of modern fully relativistic quantum chemical models.

  1. Vesta's Elemental Composition

    Science.gov (United States)

    Prettyman, T. H.; Beck, A. W.; Feldman, W. C.; Lawrence, D. J.; McCoy, T. J.; McSween, H. Y.; Mittlefehldt, D. W.; Peplowski, P. N.; Raymond, C. A.; Reedy, R. C.; Russell, C. T.; Titus, T. N.; Toplis, M. J.; Yamashita, N.

    2014-01-01

    Many lines of evidence (e.g. common geochemistry, chronology, O-isotope trends, and the presence of different HED rock types in polymict breccias) indicate that the howardite, eucrite, and diogenite (HED) meteorites originated from a single parent body. Meteorite studies show that this protoplanet underwent igneous differentiation to form a metallic core, an ultramafic mantle, and a basaltic crust. A spectroscopic match between the HEDs and 4 Vesta along with a plausible mechanism for their transfer to Earth, perhaps as chips off V-type asteroids ejected from Vesta's southern impact basin, supports the consensus view that many of these achondritic meteorites are samples of Vesta's crust and upper mantle. The HED-Vesta connection was put to the test by the NASA Dawn mission, which spent a year in close proximity to Vesta. Measurements by Dawn's three instruments, redundant Framing Cameras (FC), a Visible-InfraRed (VIR) spectrometer, and a Gamma Ray and Neutron Detector (GRaND), along with radio science have strengthened the link. Gravity measurements by Dawn are consistent with a differentiated, silicate body, with a dense Fe-rich core. The range of pyroxene compositions determined by VIR overlaps that of the howardites. Elemental abundances determined by nuclear spectroscopy are also consistent with HED-compositions. Observations by GRaND provided a new view of Vesta inaccessible by telescopic observations. Here, we summarize the results of Dawn's geochemical investigation of Vesta and their implications.

  2. EAF optimal managing elements

    Science.gov (United States)

    Ioana, A.; Constantin, N.; Dragna, E. C.

    2017-01-01

    Electric Arc Furnaces (EAF) is an important and complex aggregate. We present elements of EAF operating efficiency. The reliability of the EAF is mainly determined by electric circuit reliability and especially of the transformator of the furnace. This due to the fact that, in an electric steel plant, the objective „24 tapping/day” involves. Due to the complexity of the process, the EAF operation needs a computer usage and, in his componence, it must have two independent calculation units (UC1) and (UC2). Based on these two input sets (Σi1) and ((Σi2), the calculation unit (UC1) builds the general operation procedure based on mathematical methods. For that purpose, there are used the results of the 5 mathematical methods: the mathematical model to write-off the function objective (M.F.O.); the mathematical model of calculating the charge (M.C.C.); the mathematical model of conducting the effective melt (M.C.M.); the mathematical model of reheating the charge (M.R.C.); the mathematical model of blasting the reactive dusts (M.B.R.D.).

  3. On Multiple Questions and Multiple WH Fronting.

    Science.gov (United States)

    Rudin, Catherine

    An analysis of languages with multiple fronting of WH words (who, what, whom, etc.) looks in detail at Polish, Serbo-Croatian, Czech, Bulgarian (Slavic languages), and Romanian (a Romance language). In spite of their superficial similarity, the Slavic and East European languages that normally put all WH words at the beginning of clauses fall into…

  4. Identifying Synonymous Regulatory Elements in Vertebrate Genomes

    Energy Technology Data Exchange (ETDEWEB)

    Ovcharenko, I; Nobrega, M A

    2005-02-07

    Synonymous gene regulation, defined as driving shared temporal and/or spatial expression of groups of genes, is likely predicated on genomic elements that contain similar modules of certain transcription factor binding sites (TFBS). We have developed a method to scan vertebrate genomes for evolutionary conserved modules of TFBS in a predefined configuration, and created a tool, named SynoR that identify synonymous regulatory elements (SREs) in vertebrate genomes. SynoR performs de novo identification of SREs utilizing known patterns of TFBS in active regulatory elements (REs) as seeds for genome scans. Layers of multiple-species conservation allow the use of differential phylogenetic sequence conservation filters in the search of SREs and the results are displayed as to provide an extensive annotation of genes containing detected REs. Gene Ontology categories are utilized to further functionally classify the identified genes, and integrated GNF Expression Atlas 2 data allow the cataloging of tissue-specificities of the predicted SREs. We illustrate how this new tool can be used to establish a linkage between human diseases and noncoding genomic content. SynoR is publicly available at http://synor.dcode.org.

  5. Operation characteristics of a multiple type MCFC

    Energy Technology Data Exchange (ETDEWEB)

    Kuroe, S.; Kamo, T. [Hitachi Research Lab., Hitachi, Ltd., Ibaraki-ken (Japan); Fujimura, H.; Kahara, T. [Hitachi, Ltd., Ibaraki-ken (Japan)

    1996-12-31

    Multiple type structure of MCFC of which the separator of the cell is divided by four element cells has been studied. For the stable operation of this type cell, the effect of gas flow rate and temperature distribution on the cell voltage should be clear. In order to clarify these characteristics, a small sized mimic model has been made and tested. The flow rate distribution for the four element cells were varied and cell voltage and temperature distribution were measured for each cell. The decrease in cell voltage and the increase in maximum temperature became remarkable when the apparent utilization factor for one element cell became over 100%. The calculated results agreed fairly good with test results.

  6. Multiple dimensions of performance

    NARCIS (Netherlands)

    Torenvlied, René

    2013-01-01

    This presentation considers the multiple dimensions of performance in performance studies, and potentially contradicting effects of different management strategies on separate indicators of performance

  7. EDGE-ORIENTED HEXAGONAL ELEMENTS

    Institute of Scientific and Technical Information of China (English)

    Chao Yang; Jiachang Sun

    2007-01-01

    In this paper, two new nonconforming hexagonal elements are presented, which are based on the trilinear function space Q(3)1 and are edge-oriented, analogical to the case of the rotated Q1 quadrilateral element. A priori error estimates are given to show that the new elements achieve first-order accuracy in the energy norm and second-order accuracy in the L2 norm. This theoretical result is confirmed by the numerical tests.

  8. Matrix elements of unstable states

    CERN Document Server

    Bernard, V; Meißner, U -G; Rusetsky, A

    2012-01-01

    Using the language of non-relativistic effective Lagrangians, we formulate a systematic framework for the calculation of resonance matrix elements in lattice QCD. The generalization of the L\\"uscher-Lellouch formula for these matrix elements is derived. We further discuss in detail the procedure of the analytic continuation of the resonance matrix elements into the complex energy plane and investigate the infinite-volume limit.

  9. Photoshop Elements 10 For Dummies

    CERN Document Server

    Obermeier, Barbara

    2011-01-01

    Perfect your photos and images with this "focused" guide to the latest version of Photoshop Elements For most of us, the professional-level Photoshop is overkill for our needs. Amateur photographers and photo enthusiasts turn to Photoshop Elements for a powerful but simpler way to edit and retouch their snapshots. Photoshop Elements 10 For Dummies, fully updated and revised for the latest release of this software product, helps you navigate Elements to create, edit, fix, share, and organize the high-quality images you desire. Full color pages bring the techniques to life and make taking great

  10. Large deformation simulation of anisotropic material using an updated Lagrangian finite element method

    NARCIS (Netherlands)

    Thije, ten R.H.W.; Akkerman, R.; Huetink, J.

    2007-01-01

    Large deformation finite element (FE) simulations of anisotropic material often show slow convergence or break down with increasing anisotropy and deformation. Large deformations are generally approximated by multiple small linearised steps. This leads to poor performance and contradicting formulati

  11. Element Verification and Comparison in Sierra/Solid Mechanics Problems

    Energy Technology Data Exchange (ETDEWEB)

    Ohashi, Yuki; Roth, William

    2016-05-01

    The goal of this project was to study the effects of element selection on the Sierra/SM solutions to five common solid mechanics problems. A total of nine element formulations were used for each problem. The models were run multiple times with varying spatial and temporal discretization in order to ensure convergence. The first four problems have been compared to analytical solutions, and all numerical results were found to be sufficiently accurate. The penetration problem was found to have a high mesh dependence in terms of element type, mesh discretization, and meshing scheme. Also, the time to solution is shown for each problem in order to facilitate element selection when computer resources are limited.

  12. Cognitive-graphic method for constructing of hierarchical forms of basic functions of biquadratic finite element

    Science.gov (United States)

    Astionenko, I. O.; Litvinenko, O. I.; Osipova, N. V.; Tuluchenko, G. Ya.; Khomchenko, A. N.

    2016-10-01

    Recently the interpolation bases of the hierarchical type have been used for the problem solving of the approximation of multiple arguments functions (such as in the finite-element method). In this work the cognitive graphical method of constructing of the hierarchical form bases on the serendipity finite elements is suggested, which allowed to get the alternative bases on a biquadratic finite element from the serendipity family without internal knots' inclusion. The cognitive-graphic method allowed to improve the known interpolation procedure of Taylor and to get the modified elements with irregular arrangement of knots. The proposed procedures are universal and are spread in the area of finite-elements.

  13. A novel tRNA variable number tandem repeat at human chromosome 1q23.3 is implicated as a boundary element based on conservation of a CTCF motif in mouse.

    Science.gov (United States)

    Darrow, Emily M; Chadwick, Brian P

    2014-06-01

    The human genome contains numerous large tandem repeats, many of which remain poorly characterized. Here we report a novel transfer RNA (tRNA) tandem repeat on human chromosome 1q23.3 that shows extensive copy number variation with 9-43 repeat units per allele and displays evidence of meiotic and mitotic instability. Each repeat unit consists of a 7.3 kb GC-rich sequence that binds the insulator protein CTCF and bears the chromatin hallmarks of a bivalent domain in human embryonic stem cells. A tRNA containing tandem repeat composed of at least three 7.6-kb GC-rich repeat units reside within a syntenic region of mouse chromosome 1. However, DNA sequence analysis reveals that, with the exception of the tRNA genes that account for less than 6% of a repeat unit, the remaining 7.2 kb is not conserved with the notable exception of a 24 base pair sequence corresponding to the CTCF binding site, suggesting an important role for this protein at the locus.

  14. Formation of multiple networks

    DEFF Research Database (Denmark)

    Magnani, Matteo; Rossi, Luca

    2013-01-01

    we introduce the first network formation model for multiple networks. Network formation models are among the most popular tools in traditional network studies, because of both their practical and theoretical impact. However, existing models are not sufficient to describe the generation of multiple...

  15. Applying Multiple Intelligences

    Science.gov (United States)

    Christodoulou, Joanna A.

    2009-01-01

    The ideas of multiple intelligences introduced by Howard Gardner of Harvard University more than 25 years ago have taken form in many ways, both in schools and in other sometimes-surprising settings. The silver anniversary of Gardner's learning theory provides an opportunity to reflect on the ways multiple intelligences theory has taken form and…

  16. Orchestrating Multiple Intelligences

    Science.gov (United States)

    Moran, Seana; Kornhaber, Mindy; Gardner, Howard

    2006-01-01

    Education policymakers often go astray when they attempt to integrate multiple intelligences theory into schools, according to the originator of the theory, Howard Gardner, and his colleagues. The greatest potential of a multiple intelligences approach to education grows from the concept of a profile of intelligences. Each learner's intelligence…

  17. Suicide and multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E N; Stenager, Egon; Koch-Henriksen, N

    1992-01-01

    In a nationwide investigation the risk of death by suicide for patients with multiple sclerosis (MS) was assessed using records kept at the Danish Multiple Sclerosis Registry (DMSR) and the Danish National Register of Cause of Death. The investigation covers all MS patients registered with DSMR...

  18. ALICE Photon Multiplicity Detector

    CERN Multimedia

    Nayak, T

    2013-01-01

    Photon Multiplicity Detector (PMD) measures the multiplicity and spatial distribution of photons in the forward region of ALICE on a event-by-event basis. PMD is a pre-shower detector having fine granularity and full azimuthal coverage in the pseudo-rapidity region 2.3 < η < 3.9.

  19. Suicide and multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E N; Stenager, Egon; Koch-Henriksen, Nils

    1992-01-01

    In a nationwide investigation the risk of death by suicide for patients with multiple sclerosis (MS) was assessed using records kept at the Danish Multiple Sclerosis Registry (DMSR) and the Danish National Register of Cause of Death. The investigation covers all MS patients registered with DSMR...

  20. Multiple pyogenic liver abscess

    Institute of Scientific and Technical Information of China (English)

    Mabrouk Bahloul; Anis Chaari; Nadia Bouaziz-Khlaf; Hatem Kallel; Leila Herguefi; Hedi Chelly; Chokri Ben Hamida; Mounir Bouaziz

    2006-01-01

    Multiple pyogenic liver abscesses have been rarely described. We report a fatal case of multiple pyogenic liver abscesses affecting a 38-year-old woman requiring surgical drainage. Evolution was marked by occurrence of a septic shock with multi-organ system failure. The patient died 48 h after surgery. Causes, therapeutics and outcome of the disease are discussed.

  1. Multiple Myeloma Overview

    Science.gov (United States)

    ... be worse. The 2 medicines most often used together to treat multiple myeloma are melphalan (a chemotherapy drug) and prednisone (a steroid medicine).If you have multiple myeloma, you should try to stay active. Staying active helps keep the calcium in your bones ...

  2. Constraining Multiple Grammars

    Science.gov (United States)

    Hopp, Holger

    2014-01-01

    This article offers the author's commentary on the Multiple Grammars (MG) language acquisition theory proposed by Luiz Amaral and Tom Roeper in the present issue. Multiple Grammars advances the claim that optionality is a constitutive characteristic of any one grammar, with interlanguage grammars being perhaps the clearest examples of a…

  3. Multiple Frequency Parametric Sonar

    Science.gov (United States)

    2015-09-28

    300003 1 MULTIPLE FREQUENCY PARAMETRIC SONAR STATEMENT OF GOVERNMENT INTEREST [0001] The invention described herein may be manufactured and...beams. However, the multiple nonlinear interactions are not taken advantage of in order to generate additional efficiencies, bandwidth, and SNR...array. [0050] It will be understood that many additional changes in details, materials , steps, and arrangements of parts which have been described

  4. Constraining Multiple Grammars

    Science.gov (United States)

    Hopp, Holger

    2014-01-01

    This article offers the author's commentary on the Multiple Grammars (MG) language acquisition theory proposed by Luiz Amaral and Tom Roeper in the present issue. Multiple Grammars advances the claim that optionality is a constitutive characteristic of any one grammar, with interlanguage grammars being perhaps the clearest examples of a…

  5. On diversity performance of two-element coupling element based antenna structure for mobile terminal

    DEFF Research Database (Denmark)

    Al-Hadi, Azremi Abdullah; Toivanen, Juha; Laitinen, Tommi

    2010-01-01

    fading. The main challenge of antenna diversity in practical application is the integration of multiple antennas on a small ground plane. Two-element antenna structure based on coupling element antenna concept for diversity application has been studied in previous work and it has shown to be feasible......In wireless communication systems, multipath interference has a significant impact on system design and performance. Fast fading is caused by the coherent summation of one or more echoes from many reflection points reaching the receive antenna. Antenna diversity can be used to mitigate multipath...... for low frequency diversity application with stable and low envelope correlation across wide frequency range. The studied structure has been tuned to be operating at 1600 MHz for measurement evaluation purpose. This paper presents an analysis of diversity performance of the structure in terms...

  6. Clean Elements in Abelian Rings

    Indian Academy of Sciences (India)

    Angelina Y M Chin

    2009-04-01

    Let be a ring with identity. An element in is said to be clean if it is the sum of a unit and an idempotent. is said to be clean if all of its elements are clean. If every idempotent in is central, then is said to be abelian. In this paper we obtain some conditions equivalent to being clean in an abelian ring.

  7. Repetitive elements in parasitic protozoa

    Directory of Open Access Journals (Sweden)

    Clayton Christine

    2010-05-01

    Full Text Available Abstract A recent paper published in BMC Genomics suggests that retrotransposition may be active in the human gut parasite Entamoeba histolytica. This adds to our knowledge of the various types of repetitive elements in parasitic protists and the potential influence of such elements on pathogenicity. See research article http://www.biomedcentral.com/1471-2164/11/321

  8. SNTP program fuel element design

    Science.gov (United States)

    Walton, Lewis A.; Ales, Matthew W.

    1993-06-01

    The SNTP program is evaluating the feasibility of utilizing a particle bed reactor to develop a high-performance nuclear thermal rocket engine. The optimum fuel element arrangement depends on the power level desired and the intended application. The key components of the fuel element have been developed and are being tested.

  9. RESEARCH METHODS OF LOCATIVE ELEMENT

    Directory of Open Access Journals (Sweden)

    SULAYMANOVA N.J.

    2012-01-01

    Full Text Available The article is devoted to the methods of investigation of locative elements. Sentence analysis with locative elements is taken according to the results of component analysis in the system of contradicting – opposition. More over the article is full of examples related to the description of various syntactic units.

  10. Single element hydrogen sensing material

    NARCIS (Netherlands)

    Dam, B.; Boelsma, C.

    2015-01-01

    The present invention relates to a single element thin-film device, to a method for producing a thin-film device, to a single element for detecting hydrogen absorption, to a hydrogen sensor, to an apparatus for detecting hydrogen and to an electro-magnetic transformer comprising said sensor. A thin-

  11. Solution of Finite Element Equations

    DEFF Research Database (Denmark)

    Krenk, Steen

    An important step in solving any problem by the finite element method is the solution of the global equations. Numerical solution of linear equations is a subject covered in most courses in numerical analysis. However, the equations encountered in most finite element applications have some special...

  12. Chemical experiments with superheavy elements.

    Science.gov (United States)

    Türler, Andreas

    2010-01-01

    Unnoticed by many chemists, the Periodic Table of the Elements has been extended significantly in the last couple of years and the 7th period has very recently been completed with eka-Rn (element 118) currently being the heaviest element whose synthesis has been reported. These 'superheavy' elements (also called transactinides with atomic number > or = 104 (Rf)) have been artificially synthesized in fusion reactions at accelerators in minute quantities of a few single atoms. In addition, all isotopes of the transactinide elements are radioactive and decay with rather short half-lives. Nevertheless, it has been possible in some cases to investigate experimentally chemical properties of transactinide elements and even synthesize simple compounds. The experimental investigation of superheavy elements is especially intriguing, since theoretical calculations predict significant deviations from periodic trends due to the influence of strong relativistic effects. In this contribution first experiments with hassium (Hs, atomic number 108), copernicium (Cn, atomic number 112) and element 114 (eka-Pb) are reviewed.

  13. Massively Parallel Finite Element Programming

    KAUST Repository

    Heister, Timo

    2010-01-01

    Today\\'s large finite element simulations require parallel algorithms to scale on clusters with thousands or tens of thousands of processor cores. We present data structures and algorithms to take advantage of the power of high performance computers in generic finite element codes. Existing generic finite element libraries often restrict the parallelization to parallel linear algebra routines. This is a limiting factor when solving on more than a few hundreds of cores. We describe routines for distributed storage of all major components coupled with efficient, scalable algorithms. We give an overview of our effort to enable the modern and generic finite element library deal.II to take advantage of the power of large clusters. In particular, we describe the construction of a distributed mesh and develop algorithms to fully parallelize the finite element calculation. Numerical results demonstrate good scalability. © 2010 Springer-Verlag.

  14. Chemical elements distribution in cells

    Science.gov (United States)

    Ortega, R.

    2005-04-01

    Analysing, imaging and understanding the cellular chemistry, from macromolecules to monoatomic elements, is probably a major challenge for the scientific community after the conclusion of the genome project. In order to probe the distribution of elements in cells, especially the so-called inorganic elements, it is necessary to apply microanalytical techniques with sub-micrometer resolution and high chemical sensitivity. This paper presents the current status of chemical element imaging inside cells, and a comparison of the different analytical techniques available: nuclear microprobe, electron microprobe and electron energy loss spectroscopy, synchrotron radiation microprobe, secondary ion mass spectrometry and fluorescence microscopy methods. Examples of intracellular chemical elements distributions relevant to cancer pharmacology, medical imaging, metal carcinogenesis and neuropathology studies obtained by nuclear microprobe and other microanalytical techniques are presented.

  15. Second order tensor finite element

    Science.gov (United States)

    Oden, J. Tinsley; Fly, J.; Berry, C.; Tworzydlo, W.; Vadaketh, S.; Bass, J.

    1990-01-01

    The results of a research and software development effort are presented for the finite element modeling of the static and dynamic behavior of anisotropic materials, with emphasis on single crystal alloys. Various versions of two dimensional and three dimensional hybrid finite elements were implemented and compared with displacement-based elements. Both static and dynamic cases are considered. The hybrid elements developed in the project were incorporated into the SPAR finite element code. In an extension of the first phase of the project, optimization of experimental tests for anisotropic materials was addressed. In particular, the problem of calculating material properties from tensile tests and of calculating stresses from strain measurements were considered. For both cases, numerical procedures and software for the optimization of strain gauge and material axes orientation were developed.

  16. Robust copyright protection using multiple ownership watermarks.

    Science.gov (United States)

    Li, Xiao-Wei; Lee, In-Kwon

    2015-02-01

    Generally, conventional transform (DWT and DFT, etc.) -based watermarking techniques provide only one spectrum plane for embedding the watermark, thus the embedding watermark information can be easily removed. To solve this problem, we propose an efficient cellular automata (CA) based watermarking method that CA transform (CAT) with various gateway values can provide many transform planes for watermark embedding according to various CA rules. In this paper, multiple ownership watermarks are first recorded in the form of an elemental image array (EIA), simultaneously, and then the recorded EIA as the watermark data is embedded into the CAT coefficient. An additional advantage of this proposed method is that EIA is composed of many elemental images and each elemental image has its own property of watermarks. Even though most data of elemental images are lost, the watermarks can be reconstructed from the remaining elemental images successfully. Experimental results show that the proposed technique provides good image quality and is robust in varying degree to some image processing attacks.

  17. AMG by element agglomeration and constrained energy minimization interpolation

    Energy Technology Data Exchange (ETDEWEB)

    Kolev, T V; Vassilevski, P S

    2006-02-17

    This paper studies AMG (algebraic multigrid) methods that utilize energy minimization construction of the interpolation matrices locally, in the setting of element agglomeration AMG. The coarsening in element agglomeration AMG is done by agglomerating fine-grid elements, with coarse element matrices defined by a local Galerkin procedure applied to the matrix assembled from the individual fine-grid element matrices. This local Galerkin procedure involves only the coarse basis restricted to the agglomerated element. To construct the coarse basis, one exploits previously proposed constraint energy minimization procedures now applied to the local matrix. The constraints are that a given set of vectors should be interpolated exactly, not only globally, but also locally on every agglomerated element. The paper provides algorithmic details, as well as a convergence result based on a ''local-to-global'' energy bound of the resulting multiple-vector fitting AMG interpolation mappings. A particular implementation of the method is illustrated with a set of numerical experiments.

  18. Effective elements of school health promotion across behavioral domains: A systematic review of reviews

    NARCIS (Netherlands)

    Peters, L.W.H.; Kok, G.; Ten Dam, G.T.M.; Buijs, G.J.; Paulussen, T.G.W.M.

    2009-01-01

    Background. Most school health education programs focus on a single behavioral domain. Integrative programs that address multiple behaviors may be more efficient, but only if the elements of change are similar for these behaviors. The objective of this study was to examine which effective elements

  19. Multiple methods integration for structural mechanics analysis and design

    Science.gov (United States)

    Housner, J. M.; Aminpour, M. A.

    1991-01-01

    A new research area of multiple methods integration is proposed for joining diverse methods of structural mechanics analysis which interact with one another. Three categories of multiple methods are defined: those in which a physical interface are well defined; those in which a physical interface is not well-defined, but selected; and those in which the interface is a mathematical transformation. Two fundamental integration procedures are presented that can be extended to integrate various methods (e.g., finite elements, Rayleigh Ritz, Galerkin, and integral methods) with one another. Since the finite element method will likely be the major method to be integrated, its enhanced robustness under element distortion is also examined and a new robust shell element is demonstrated.

  20. Search for superheavy-element decay in samples of Madagascar monazite

    Energy Technology Data Exchange (ETDEWEB)

    Ketelle, B.H.; O' Kelley, G.D.; Stoughton, R.W.; Halperin, J.

    1976-12-27

    Two samples of Madagascar monazite from the same geological formation as the biotite studied by Gentry et al. were examined by using a neutron multiplicity counter capable of detecting binary or ternary spontaneous fission decay in any element. No events characteristic of spontaneous fission decay of superheavy elements were found. Derived limits indicate that if superheavy elements were present, then their spontaneous fission half-lives must be extremely long or their concentrations extremely small. (AIP)

  1. Hadron multiplicities at COMPASS

    CERN Document Server

    Du Fresne Von Hohenesche, Nicolas

    2014-01-01

    Quark fragmentation functions (FF) D h q ( z ; Q 2 ) describe final-state hadronisation of quarks q into hadrons h . The FFs can be extracted from hadron multiplicities produced in semi-inclusive deep inelastic scattering. The COMPASS collaboration has recently measured charged hadron multiplicities for identified pions and kaons using a 160 GeV/c muon beam impinging on an isoscalar LiD target. The data cover a large kinematical range and provide an important input for global QCD analyses of world data at NLO, aiming at the determination of FFs. The latest results from COMPASS on pion multiplicities and pion fragmentation functions will be discussed.

  2. Vision and multiple sclerosis.

    Science.gov (United States)

    Hickman, Simon J; Raoof, Naz; McLean, Rebecca J; Gottlob, Irene

    2014-01-01

    Multiple sclerosis can affect vision in many ways, including optic neuritis, chronic optic neuropathy, retrochiasmal visual field defects, higher order cortical processing, double vision, nystagmus and also by related ocular conditions such as uveitis. There are also side effects from recently introduced multiple sclerosis treatments that can affect vision. This review will discuss all these aspects and how they come together to cause visual symptoms. It will then focus on practical aspects of how to recognise when there is a vision problem in a multiple sclerosis patient and on what treatments are available to improve vision.

  3. Core-Mantle Partitioning of Volatile Siderophile Elements and the Origin of Volatile Elements in the Earth

    Science.gov (United States)

    Nickodem, K.; Righter, K.; Danielson, L.; Pando, K.; Lee, C.

    2012-01-01

    There are currently several hypotheses on the origin of volatile siderophile elements in the Earth. One hypothesis is that they were added during Earth s accretion and core formation and mobilized into the metallic core [1], others claim multiple stage origin [2], while some hypothesize that volatiles were added after the core already formed [3]. Several volatile siderophile elements are depleted in Earth s mantle relative to the chondrites, something which continues to puzzle many scientists. This depletion is likely due to a combination of volatility and core formation. The Earth s core is composed of Fe and some lighter constituents, although the abundances of these lighter elements are unknown [4]. Si is one of these potential light elements [5] although few studies have analyzed the effect of Si on metal-silicate partitioning, in particular the volatile elements. As, In, Ge, and Sb are trace volatile siderophile elements which are depleted in the mantle but have yet to be extensively studied. The metal-silicate partition coefficients of these elements will be measured to determine the effect of Si. Partition coefficients depend on temperature, pressure, oxygen fugacity, and metal and silicate composition and can constrain the concentrations of volatile, siderophile elements found in the mantle. Reported here are the results from 13 experiments examining the partitioning of As, In, Ge, and Sb between metallic and silicate liquid. These experiments will examine the effect of temperature, and metal-composition (i.e., Si content) on these elements in or-der to gain a greater understanding of the core-mantle separation which occurred during the Earth s early stages. The data can then be applied to the origin of volatile elements in the Earth.

  4. Kriging-Based Finite Element Method: Element-By-Element Kriging Interpolation

    Directory of Open Access Journals (Sweden)

    W. Kanok-Nukulchai

    2009-01-01

    Full Text Available An enhancement of the finite element method with Kriging shape functions (K-FEM was recently proposed. In this method, the field variables of a boundary value problem are approximated using ‘element-by-element’ piecewise Kriging interpolation (el-KI. For each element, the interpolation function is constructed from a set of nodes within a prescribed domain of influence comprising the element and its several layers of neighbouring elements. This paper presents a numerical study on the accuracy and convergence of the el-KI in function fitting problems. Several examples of functions in two-dimensional space are employed in this study. The results show that very accurate function fittings and excellent convergence can be attained by the el-KI.

  5. Imaging techniques for elements and element species in plant science.

    Science.gov (United States)

    Wu, Bei; Becker, J Sabine

    2012-05-01

    Revealing the uptake, transport, localization and speciation of both essential and toxic elements in plants is important for understanding plant homeostasis and metabolism, subsequently, providing information for food and nutrient studies, agriculture activities, as well as environmental research. In the last decade, emerging techniques for elemental imaging and speciation analysis allowed us to obtain increasing knowledge of elemental distribution and availabilities in plants. Chemical imaging techniques include mass spectrometric methods such as secondary ionization mass spectrometry (SIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and synchrotron-based techniques such as X-ray fluorescence spectroscopy (SRXRF), and so forth. On the other hand, X-ray absorption spectroscopy (XAS) based on synchrotron radiation is capable of in situ investigation of local atomic structure around the central element of interest. This technique can also be operated in tandem with SRXRF to image each element species of interest within plant tissue. In this review, the principles and state-of-the-art of these techniques regarding sample preparation, advantages and limitations, and improvement of sensitivity and spatial resolution are discussed. New results with respect to elemental distribution and speciation in plants revealed by these techniques are presented.

  6. Transposable elements: The enemies within.

    Science.gov (United States)

    Scarfò, Irene; Pellegrino, Elisa; Mereu, Elisabetta; Inghirami, Giorgio; Piva, Roberto

    2016-10-01

    Understanding transformation mechanisms other than genetic aberrations has recently captured the attention of cancer researchers. To date, the role of transposable elements (TEs) in tumor development remains largely undefined. However, an increasing number of studies have reported that loss of epigenetic control causes TE reactivation and consequent oncogenic transcription. Here, we discuss principal examples of TEs-driven oncogenesis. Available data suggest that long terminal repeats and long interspersed nuclear elements play a pivotal role as alternative promoters. These findings provide definitive experimental evidence that repetitive elements are a powerful underestimated force toward oncogenesis and open the possibility to new therapeutic treatments.

  7. Matrix Elements for Hylleraas CI

    Science.gov (United States)

    Harris, Frank E.

    The limitation to at most a single interelectron distance in individual configurations of a Hylleraas-type multiconfiguration wave function restricts significantly the types of integrals occurring in matrix elements for energy calculations, but even then if the formulation is not handled efficiently the angular parts of these integrals escalate to create expressions of great complexity. This presentation reviews ways in which the angular-momentum calculus can be employed to systematize and simplify the matrix element formulas, particularly those for the kinetic-energy matrix elements.

  8. quadratic spline finite element method

    Directory of Open Access Journals (Sweden)

    A. R. Bahadir

    2002-01-01

    Full Text Available The problem of heat transfer in a Positive Temperature Coefficient (PTC thermistor, which may form one element of an electric circuit, is solved numerically by a finite element method. The approach used is based on Galerkin finite element using quadratic splines as shape functions. The resulting system of ordinary differential equations is solved by the finite difference method. Comparison is made with numerical and analytical solutions and the accuracy of the computed solutions indicates that the method is well suited for the solution of the PTC thermistor problem.

  9. Finite element computational fluid mechanics

    Science.gov (United States)

    Baker, A. J.

    1983-01-01

    Finite element analysis as applied to the broad spectrum of computational fluid mechanics is analyzed. The finite element solution methodology is derived, developed, and applied directly to the differential equation systems governing classes of problems in fluid mechanics. The heat conduction equation is used to reveal the essence and elegance of finite element theory, including higher order accuracy and convergence. The algorithm is extended to the pervasive nonlinearity of the Navier-Stokes equations. A specific fluid mechanics problem class is analyzed with an even mix of theory and applications, including turbulence closure and the solution of turbulent flows.

  10. Connecting the Production Multiple

    DEFF Research Database (Denmark)

    Lichen, Alex Yu; Mouritsen, Jan

    was implementing sales and operations planning (S&OP) process to foster integration on its demand chain. Although actors wanted to see what it is to produce, that is to say, the object Production, as a singular object that could be diffused across time and space, Production became more multiple because the S......&OP process itself is a fluid object, but there is still possibility to organise the messy Production. There are connections between the Production multiple and the managerial technology fluid. The fluid enacted the multiplicity of Production thus making it more difficult to be organised because there were...... in this sense attracts different absent local practices, which in turn make accounting fluid to account for the Production multiple. The accounting fluid brings together accounting inscriptions and particularity of locals. In the language of circulating references, reduction and amplification no longer go...

  11. Multiple foreign body granulomas

    Directory of Open Access Journals (Sweden)

    Panvelkar V

    1991-01-01

    Full Text Available A case of multiple foreign body granulomas occurring after mine-blast injury in a soldier is reported. Systemic steroids with antibiotics given essentially for eczematoid dermatitis produced good clinical improvement with marked resolution of granulomas.

  12. Multiple Stages 2

    DEFF Research Database (Denmark)

    Andreasen, John

    Multiple stages 2: theatrical futures, set design, community plays, cultural capitals, democracy & drama, WWII dramas, performance on adoption, promenade about emigration, qualities in political theatre, performance analysis, dramaturgical education, Toulmin Variations...

  13. Understanding Multiplication of Fractions.

    Science.gov (United States)

    Sweetland, Robert D.

    1984-01-01

    Discussed the use of Cuisenaire rods in teaching the multiplication of fractions. Considers whole number times proper fraction, proper fraction multiplied by proper fraction, mixed number times proper fraction, and mixed fraction multiplied by mixed fractions. (JN)

  14. Pomalidomide for Multiple Myeloma

    Science.gov (United States)

    A summary of results from a phase III trial that compared the combination of pomalidomide (Pomalyst®) and low-dose dexamethasone versus high-dose dexamethasone alone in patients with multiple myeloma that has progressed despite other treatments.

  15. Multiple Stages 2

    DEFF Research Database (Denmark)

    Andreasen, John

    Multiple stages 2: theatrical futures, set design, community plays, cultural capitals, democracy & drama, WWII dramas, performance on adoption, promenade about emigration, qualities in political theatre, performance analysis, dramaturgical education, Toulmin Variations...

  16. Rehabilitation and multiple sclerosis

    DEFF Research Database (Denmark)

    Dalgas, Ulrik

    2011-01-01

    In a chronic and disabling disease like multiple sclerosis, rehabilitation becomes of major importance in the preservation of physical, psychological and social functioning. Approximately 80% of patients have multiple sclerosis for more than 35 years and most will develop disability at some point...... of their lives, emphasising the importance of rehabilitation in order to maintain quality of life. An important aspect of multiple sclerosis rehabilitation is the preservation of physical functioning. Hot topics in the rehabilitation of physical function include (1) exercise therapy, (2) robot-assisted training...... and (3) pharmacological interventions. Exercise therapy has for many years been a controversial issue in multiple sclerosis rehabilitation and the advice generally given to patients was not to participate in physical exercise, since it was thought to lead to a worsening of symptoms or fatigue. However...

  17. Multiple conjugay problem in graphs of free abelian groups

    CERN Document Server

    Beeker, Benjamin

    2011-01-01

    A group G is a vGBS group if it admits a decomposition as a finite graph of groups with all edge and vertex groups finitely generated and free abelian. We prove that the multiple conjugacy problem is solvable between two n-tuples A and B of elements of G whenever the elements of A does not generate an elliptic subgroup. When the edge and vertex groups are infinite cyclic, i.e. G is a Generalized Baumslag-Solitar group, we prove that the multiple conjugacy problem is fully solvable.

  18. Generalized internal multiple imaging

    KAUST Repository

    Zuberi, M. A. H.

    2014-08-05

    Internal multiples deteriorate the image when the imaging procedure assumes only single scattering, especially if the velocity model does not have sharp contrasts to reproduce such scattering in the Green’s function through forward modeling. If properly imaged, internal multiples (internally scattered energy) can enhance the seismic image. Conventionally, to image internal multiples, accurate, sharp contrasts in the velocity model are required to construct a Green’s function with all the scattered energy. As an alternative, we have developed a generalized internal multiple imaging procedure that images any order internal scattering using the background Green’s function (from the surface to each image point), constructed from a smooth velocity model, usually used for conventional imaging. For the first-order internal multiples, the approach consisted of three steps, in which we first back propagated the recorded surface seismic data using the background Green’s function, then crosscorrelated the back-propagated data with the recorded data, and finally crosscorrelated the result with the original background Green’s function. This procedure images the contribution of the recorded first-order internal multiples, and it is almost free of the single-scattering recorded energy. The cost includes one additional crosscorrelation over the conventional single-scattering imaging application. We generalized this method to image internal multiples of any order separately. The resulting images can be added to the conventional single-scattering image, obtained, e.g., from Kirchhoff or reverse-time migration, to enhance the image. Application to synthetic data with reflectors illuminated by multiple scattering (double scattering) demonstrated the effectiveness of the approach.

  19. 基于ICP-MS法建立散结镇痛胶囊中四味药材多种元素的分析方法*%The Analysis Methodology for Multiple Elements in Four Herbs ofSanjie Zhentong Capsules

    Institute of Scientific and Technical Information of China (English)

    王金玲; 秦建平; 胡军华; 李家春; 黄文哲; 王振中; 萧伟

    2015-01-01

    To develop a method for the determination of 18 elements such as Pb, Cu, As, Hg, Mn, Ni, & Tl in Panax notoginseng,Bulbus fritillariae thunbergii,Coix seed, Resina draconis, and to control the contents of heavy metal elements in Sanjie Zhentong Capsule, the samples were digested by microwaves and then analyzed by appropriate determination parameters through ICP-MS, with the internal standard method to improve the matrix effect and interference. The correlation coefficientR2≥ 0.999 2. The lowest limits of quantification were from 0.002 8 to 0.54 μg·L-1. The experiments had better repeatability, while the recovery values ranged from 73.01% to 109.13%. The method is simple, accurate and high sensitive, and it can be used for the determination of rapid monitoring the multi-elements inPanax notoginseng, Bulbus fritillariae thunbergii, Coix seed,and Resina draconis.%目的:建立三七、浙贝母、薏苡仁、龙血竭药材中Pb,Cu,As,Cd,Hg,Mn,Ni和Tl等18种元素检测方法,对散结镇痛胶囊中重金属元素进行控制。方法:药材采用微波消解法进行消解、电感耦合等离子体质谱仪进行分析,选择内标法定量以改善基体效应和干扰。结果:各元素的线性关系良好,相关系数R2≥0.9992;方法检出限为0.0028-0.54μg·L-1,实验重复性良好;加样回收率在73.01%-109.13%。结论:测量方法灵敏度高,专属性好,可为监控及制订中药材中有害元素的限量提供参考。

  20. An efficient rectangular plate element

    Institute of Scientific and Technical Information of China (English)

    SHI; Zhongci

    2001-01-01

    [1]Shi Zhong-ci, On the accuracy of the quasi-conforming and generalize conforming finite elements, Chin. Ann. Math., 1990, 11B: 148.[2]Shi Zhong-ci, Chen Shao-chun, Huang Hong-ci, Plate elements with high accuracy, Collec. Geom. Anal. Math. Phys. (ed. Li Ta-Tsien), Singapore: World Scientific, 1997, 155—164.[3]Chen Shao-chun, Shi Zhong-ci, Double set parameter method for the construction of the element stiffness matrix, Mathematica Numerica Sinica (in Chinese), 1991, 13: 286.[4]Ciarlet, P., The Finite Element Method for Elliptic Problems, Amsterdam: North-Holland, 1978.

  1. Finite element methods for engineers

    CERN Document Server

    Fenner, Roger T

    2013-01-01

    This book is intended as a textbook providing a deliberately simple introduction to finite element methods in a way that should be readily understandable to engineers, both students and practising professionals. Only the very simplest elements are considered, mainly two dimensional three-noded “constant strain triangles”, with simple linear variation of the relevant variables. Chapters of the book deal with structural problems (beams), classification of a broad range of engineering into harmonic and biharmonic types, finite element analysis of harmonic problems, and finite element analysis of biharmonic problems (plane stress and plane strain). Full Fortran programs are listed and explained in detail, and a range of practical problems solved in the text. Despite being somewhat unfashionable for general programming purposes, the Fortran language remains very widely used in engineering. The programs listed, which were originally developed for use on mainframe computers, have been thoroughly updated for use ...

  2. Alu elements and hominid phylogenetics

    Science.gov (United States)

    Salem, Abdel-Halim; Ray, David A.; Xing, Jinchuan; Callinan, Pauline A.; Myers, Jeremy S.; Hedges, Dale J.; Garber, Randall K.; Witherspoon, David J.; Jorde, Lynn B.; Batzer, Mark A.

    2003-01-01

    Alu elements have inserted in primate genomes throughout the evolution of the order. One particular Alu lineage (Ye) began amplifying relatively early in hominid evolution and continued propagating at a low level as many of its members are found in a variety of hominid genomes. This study represents the first conclusive application of short interspersed elements, which are considered nearly homoplasy-free, to elucidate the phylogeny of hominids. Phylogenetic analysis of Alu Ye5 elements and elements from several other subfamilies reveals high levels of support for monophyly of Hominidae, tribe Hominini and subtribe Hominina. Here we present the strongest evidence reported to date for a sister relationship between humans and chimpanzees while clearly distinguishing the chimpanzee and human lineages. PMID:14561894

  3. Systematic Integrated Process Design and Control of Reactive Distillation Processes Involving Multi-elements

    DEFF Research Database (Denmark)

    Mansouri, Seyed Soheil; Sales-Cruz, Mauricio; Huusom, Jakob Kjøbsted

    2016-01-01

    In this work, integrated process design and control of reactive distillation processes that involve multiple elements (more than two) is addressed through a computer-aided hierarchical decomposition-based framework. Multiple elements are encountered for reactive systems when four or more compounds...... (including inert compounds) are encountered. The reactive distillation design methods and tools which are similar in concept to design of binary non-reactive distillations and binary reactive distillations are used for design of multi-element reactive distillation processes, such as driving force approach...

  4. MULTIPLE SPINAL CANAL MENINGIOMAS

    Directory of Open Access Journals (Sweden)

    Nandigama Pratap Kumar

    2016-10-01

    Full Text Available BACKGROUND Meningiomas of the spinal canal are common tumours with the incidence of 25 percent of all spinal cord tumours. But multiple spinal canal meningiomas are rare in compare to solitary lesions and account for 2 to 3.5% of all spinal meningiomas. Most of the reported cases are both intra cranial and spinal. Exclusive involvement of the spinal canal by multiple meningiomas are very rare. We could find only sixteen cases in the literature to the best of our knowledge. Exclusive multiple spinal canal meningiomas occurring in the first two decades of life are seldom reported in the literature. We are presenting a case of multiple spinal canal meningiomas in a young patient of 17 years, who was earlier operated for single lesion. We analysed the literature, with illustration of our case. MATERIALS AND METHODS In September 2016, we performed a literature search for multiple spinal canal meningiomas involving exclusively the spinal canal with no limitation for language and publication date. The search was conducted through http://pubmed.com, a wellknown worldwide internet medical address. To the best of our knowledge, we could find only sixteen cases of multiple meningiomas exclusively confined to the spinal canal. Exclusive multiple spinal canal meningiomas occurring in the first two decades of life are seldom reported in the literature. We are presenting a case of multiple spinal canal meningiomas in a young patient of 17 years, who was earlier operated for solitary intradural extra medullary spinal canal meningioma at D4-D6 level, again presented with spastic quadriparesis of two years duration and MRI whole spine demonstrated multiple intradural extra medullary lesions, which were excised completely and the histopathological diagnosis was transitional meningioma. RESULTS Patient recovered from his weakness and sensory symptoms gradually and bladder and bowel symptoms improved gradually over a period of two to three weeks. CONCLUSION Multiple

  5. Naturalistic Elements in The Egg

    Institute of Scientific and Technical Information of China (English)

    惠菲菲

    2013-01-01

    The purpose of the study is to analyze the naturalistic elements in The Egg, which is taken from the collection of short stories, The Triumph of the Egg. The study states the ideology and technique of naturalism and then exams how naturalistic ele-ments are revealed in the fiction. Then it comes to the conclusion that the family is defeated by the egg and the life of human be-ings is under control of complicated forces from both inside and outside.

  6. Elements of EAF automation processes

    Science.gov (United States)

    Ioana, A.; Constantin, N.; Dragna, E. C.

    2017-01-01

    Our article presents elements of Electric Arc Furnace (EAF) automation. So, we present and analyze detailed two automation schemes: the scheme of electrical EAF automation system; the scheme of thermic EAF automation system. The application results of these scheme of automation consists in: the sensitive reduction of specific consummation of electrical energy of Electric Arc Furnace, increasing the productivity of Electric Arc Furnace, increase the quality of the developed steel, increasing the durability of the building elements of Electric Arc Furnace.

  7. PROPOSAL OF NEW OPTICAL ELEMENTS

    Directory of Open Access Journals (Sweden)

    Goce Chadzitaskos

    2013-10-01

    Full Text Available A overview of our patented proposals of new optical elements is presented. The elements are suitable for laser pulse analysis, telescopy, X-ray microscopy and X-ray telescopy. They are based on the interference properties of light: a special grating for a double slit pattern, parabolic strip imaging for a telescope, and Bragg’s condition for X-ray scattering on a slice of a single crystal for X-raymicroscopy and X-ray telescopy.

  8. Programming the finite element method

    CERN Document Server

    Smith, I M; Margetts, L

    2013-01-01

    Many students, engineers, scientists and researchers have benefited from the practical, programming-oriented style of the previous editions of Programming the Finite Element Method, learning how to develop computer programs to solve specific engineering problems using the finite element method. This new fifth edition offers timely revisions that include programs and subroutine libraries fully updated to Fortran 2003, which are freely available online, and provides updated material on advances in parallel computing, thermal stress analysis, plasticity return algorithms, convection boundary c

  9. [Unusual elements in renal calculi].

    Science.gov (United States)

    Rodríguez-Miñón Cifuentes, J L; Salvador, E; Traba Villameytide, M L

    2006-01-01

    A group of 54 renal calculi were spontaneously passed renal stone after a nephritic colic. Two groups of calculi were found: papillary and non-papillary calculi. All calculi were analyzed by infrared spectroscopy and electronic microscopy scan (EMS) and EDAX. When the stones were analyzed with EDAX, elements such as C, N, O, Na, S, Mg, Al, Si, Cl, K, Ca, Mn, Fe, Ni, Zn were detected. The possible origin of these elements is discussed in this work.

  10. Nuclear chemistry of transactinide elements

    Energy Technology Data Exchange (ETDEWEB)

    Nagame, Yuichiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-07-01

    The current status on the nuclear chemistry studies of transactinide elements is reviewed. The production of transactinides in heavy ion reactions is briefly discussed, and nuclear properties on the stability of transactinides are presented. Chemical properties of the trans-actinide elements 104, 105 and 106, and a typical experimental technique used to study these properties on an atom-at-a-time base are introduced. (author)

  11. Elements of a theory for multiparton interactions in QCD

    Energy Technology Data Exchange (ETDEWEB)

    Diehl, Markus [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Ostermeier, Daniel; Schaefer, Andreas [Regensburg Univ. (Germany). Institut fuer Theoretische Physik

    2011-11-15

    We perform a detailed investigation of multiple hard interactions in hadronhadron collisions. We discuss the space-time, spin and color structure of multiple interactions, classify different contributions according to their power behavior and provide several elements required for establishing all-order factorization. This also allows us to analyze the structure of Sudakov logarithms in double hard scattering. We show how multiparton distributions can be constrained by lattice calculations, by connecting them with generalized parton distributions, and by calculating their behavior at large transverse parton momenta. (orig.)

  12. Multiple snapshot colored compressive spectral imager

    Science.gov (United States)

    Correa, Claudia V.; Hinojosa, Carlos A.; Arce, Gonzalo R.; Arguello, Henry

    2017-04-01

    The snapshot colored compressive spectral imager (SCCSI) is a recent compressive spectral imaging (CSI) architecture that senses the spatial and spectral information of a scene in a single snapshot by means of a colored mosaic FPA detector and a dispersive element. Commonly, CSI architectures allow multiple snapshot acquisition, yielding improved reconstructions of spatially detailed and spectrally rich scenes. Each snapshot is captured employing a different coding pattern. In principle, SCCSI does not admit multiple snapshots since the pixelated tiling of optical filters is directly attached to the detector. This paper extends the concept of SCCSI to a system admitting multiple snapshot acquisition by rotating the dispersive element, so the dispersed spatio-spectral source is coded and integrated at different detector pixels in each rotation. Thus, a different set of coded projections is captured using the same optical components of the original architecture. The mathematical model of the multishot SCCSI system is presented along with several simulations. Results show that a gain up to 7 dB of peak signal-to-noise ratio is achieved when four SCCSI snapshots are compared to a single snapshot reconstruction. Furthermore, a gain up to 5 dB is obtained with respect to state-of-the-art architecture, the multishot CASSI.

  13. Multiple Sclerosis in Children

    Directory of Open Access Journals (Sweden)

    Soroor INALOO

    2013-06-01

    Full Text Available How to Cite This Article: Inaloo S, Haghbin S. Multiple Sclerosis in Children. Iran J Child Neurol. 2013 Spring;7(2:1-10. Multiple sclerosis (MS is the most important immune-mediated demyelinated disease of human which is typically the disease of young adults. A total of 4% to 5% of MS population are pediatric. Pediatric MS is defined as the appearance of MS before the age of sixteen. About 80% of the pediatric cases and nearly all adolescent onset patients present with attacks typical to adult MS. Approximately 97% to 99% of the affected children have relapsing-remitting MS, while 85% to 95% of the adults experience such condition. MS in children is associated with more frequent and severe relapses. Treatment is the same as adults. We aimed to review the epidemiology, etiology, clinical manifestations, and treatment of MS in children. References1. Lublin F. History of modern multiple sclerosis therapy. J Neurol 2005 Sep;252(Suppl 3:iii3-iii9. Review.2. Murray TJ. Robert Carswell: the first illustrator of MS. Int MS J 2009 Sep;16(3:98-101.3. Kabat EA, Glusman M, Knaub V. Quantitative estimation of the albumin and gamma globulin in normal and pathologic cerebrospinal fluid by immunochemical methods. Am J Med 1948 May;4(5:653-62.4. Kumar DR, Aslinia F, Yale SH, Mazza JJ. Jean-Martin Charcot: the father of neurology. Clin Med Res 2011 Mar;9(1:46-9.5. Dawson JD. The histology of disseminated sclerosis.Trans of the Roy Soc Edinb. 1916;50:517-740.6. Gadoth N. Multiple sclerosis in children. Brain Dev 2003 Jun;25(4:229-32. Review.7. Banwell BL. Pediatric multiple sclerosis. Curr Neurol Neurosci Rep 2004 May;4(3:245-52.8. Renoux C, Vukusic S, Mikaeloff Y, Edan G, Clanet M, Dubois B, et al. Natural history of multiple sclerosis with childhood onset. N Engl J Med 2007 Jun 21;356(25:2603-13.9. Boiko A, Vorobeychicle G, Paty D, Devonshire V, Sondovnick D. Early onset multiple sclerosis: a long longitudinal study. Neurology 2002 Oct 8

  14. Assembly of finite element methods on graphics processors

    KAUST Repository

    Cecka, Cris

    2010-08-23

    Recently, graphics processing units (GPUs) have had great success in accelerating many numerical computations. We present their application to computations on unstructured meshes such as those in finite element methods. Multiple approaches in assembling and solving sparse linear systems with NVIDIA GPUs and the Compute Unified Device Architecture (CUDA) are created and analyzed. Multiple strategies for efficient use of global, shared, and local memory, methods to achieve memory coalescing, and optimal choice of parameters are introduced. We find that with appropriate preprocessing and arrangement of support data, the GPU coprocessor using single-precision arithmetic achieves speedups of 30 or more in comparison to a well optimized double-precision single core implementation. We also find that the optimal assembly strategy depends on the order of polynomials used in the finite element discretization. © 2010 John Wiley & Sons, Ltd.

  15. Multiple negation in Chaucer's The Romaunt of the Rose and Boece

    OpenAIRE

    Ruan, Zhixuan

    2013-01-01

    In this study I shall be concerned with multiple negation in Chaucer’s translation works The Romaunt of the Rose (verse) and Boece (prose). Multiple negation is understood as involving two or more negative elements that do not cancel each other out but jointly express a negation reading. The main purpose of the study is to describe the types of multiple negation in the two texts as well as to compare the usage of multiple negation in the two different styles.

  16. Safe Dynamic Multiple Inheritance

    DEFF Research Database (Denmark)

    Ernst, Erik

    2002-01-01

    Multiple inheritance and similar mechanisms are usually only supported at compile time in statically typed languages. Nevertheless, dynamic multiple inheritance would be very useful in the development of complex systems, because it allows the creation of many related classes without an explosion...... in the size and level of redundancy in the source code. In fact, dynamic multiple inheritance is already available. The language gbeta is statically typed and has supported run-time combination of classes and methods since 1997, by means of the combination operator '&'. However, with certain combinations...... of operands the '&' operator fails; as a result, dynamic creation of new classes and methods was considered a dangerous operation in all cases. This paper presents a large and useful category of combinations, and proves that combinations in this category will always succeed....

  17. Essential elements of the preoperative breast reconstruction evaluation

    OpenAIRE

    Cheng, Angela; Losken, Albert

    2015-01-01

    A plethora of options exist for breast reconstruction and preoperative evaluation must be thorough to lead to a successful outcome. We review multiple components of the preoperative assessment including the patient’s history, goals, imaging, and key elements of the physical exam. Consideration for tumor biology, staging, need or response to chemotherapy or radiation therapy is important in deciding on immediate versus delayed reconstruction. It is also important to consider the patient’s anat...

  18. Genetics Home Reference: multiple myeloma

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions multiple myeloma multiple myeloma Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Multiple myeloma is a cancer that develops in the bone ...

  19. Characterization of Multiplicative Metric Completeness

    Directory of Open Access Journals (Sweden)

    Badshshah e Romer

    2016-03-01

    Full Text Available We established fixed point theorems in multiplicative metric spaces. The obtained results generalize Banach contraction principle in multiplicative metric spaces and also characterize completeness of the underlying multiplicative metric space.

  20. A cerium(IV)-carbon multiple bond

    Energy Technology Data Exchange (ETDEWEB)

    Gregson, Matthew; Lu, Erli; McMaster, Jonathan; Lewis, William; Blake, Alexander J.; Liddle, Stephen T. [Nottingham Univ. (United Kingdom). School of Chemistry

    2013-12-02

    Straightforward access to a cerium(IV)-carbene complex was provided by one-electron oxidation of an anionic ''ate'' cerium(III)-carbene precursor, thereby avoiding decomposition reactions that plague oxidations of neutral cerium(III) compounds. The cerium(IV)-carbene complex is the first lanthanide(IV)-element multiple bond and involves a twofold bonding interaction of two electron pairs between cerium and carbon. [German] Auf direktem Wege zu einem Cer(IV)-Carbenkomplex gelangt man durch die Einelektronenoxidation einer anionischen Carben-Cerat(III)-Vorstufe. So werden Zersetzungsprozesse vermieden, die die Oxidation neutraler Cer(III)-Verbindungen erschweren. Der Cer(IV)-Carbenkomplex enthaelt die erste Lanthanoid(IV)-Element-Mehrfachbindung; dabei binden Cer und Kohlenstoff ueber zwei Elektronenpaare.

  1. Multiple Roles of Secretaries

    Institute of Scientific and Technical Information of China (English)

    刘倩; 王姝濒; 赵柳

    2015-01-01

    The work of secretaries is very comprehensive and secretaries are key members of a company team.The study on the multiple roles of secretaries is not only about the theory but also about the practice.To understand and study the multiple roles of secretaries can strengthen secretaries’ ability of adaption and secretaries’ strain capacity.The purpose of this paper is to present a way oflooking at the complexities of secretaries’ roles,and let secretaries have a better understanding of their roles to act out perfectly.

  2. Multiple Roles of Secretaries

    Institute of Scientific and Technical Information of China (English)

    刘倩; 王姝濒; 赵柳

    2015-01-01

    The work of secretaries is very comprehensive and secretaries are key members of a company team.The study on the multiple roles of secretaries is not only about the theory but also about the practice.To understand and study the multiple roles of secretaries can strengthen secretaries’ ability of adaption and secretaries’ strain capacity.The purpose of this paper is to present a way of looking at the complexities of secretaries’ roles,and let secretaries have a better understanding of their roles to act out perfectly.

  3. Jacobians with complex multiplication

    CERN Document Server

    Carocca, Angel; Rodriguez, Rubi E

    2009-01-01

    We construct and study two series of curves whose Jacobians admit complex multiplication. The curves arise as quotients of Galois coverings of the projective line with Galois group metacyclic groups $G_{q,3}$ of order $3q$ with $q \\equiv 1 \\mod 3$ an odd prime, and $G_m$ of order $2^{m+1}$. The complex multiplications arise as quotients of double coset algebras of the Galois groups of these coverings. We work out the CM-types and show that the Jacobians are simple abelian varieties.

  4. Multiple origins of life

    Science.gov (United States)

    Raup, D. M.; Valentine, J. W.

    1983-01-01

    There is some indication that life may have originated readily under primitive earth conditions. If there were multiple origins of life, the result could have been a polyphyletic biota today. Using simple stochastic models for diversification and extinction, we conclude: (1) the probability of survival of life is low unless there are multiple origins, and (2) given survival of life and given as many as 10 independent origins of life, the odds are that all but one would have gone extinct, yielding the monophyletic biota we have now. The fact of the survival of our particular form of life does not imply that it was unique or superior.

  5. Multiple sclerosis: An overview

    Directory of Open Access Journals (Sweden)

    Ganesh N. Sharma

    2014-10-01

    Full Text Available The multiples sclerosis, involves the degeneration of neurones, leading to slowing in conduction of impulses as well as leading scars. A number of causative factors have been suggested for MS, yet the exact aetiology is unknown. The diagnosis as well as treatment methods including steroidal moieties are being used in common practice, yet a specific diagnosis procedure is required. Beside these the overcome from the adverse reactions of steroids are also required. Aim of present article is to summerise the various aspects of multiples sclerosis.

  6. Identification of germline transcriptional regulatory elements in Aedes aegypti

    Science.gov (United States)

    Akbari, Omar S.; Papathanos, Philippos A.; Sandler, Jeremy E.; Kennedy, Katie; Hay, Bruce A.

    2014-02-01

    The mosquito Aedes aegypti is the principal vector for the yellow fever and dengue viruses, and is also responsible for recent outbreaks of the alphavirus chikungunya. Vector control strategies utilizing engineered gene drive systems are being developed as a means of replacing wild, pathogen transmitting mosquitoes with individuals refractory to disease transmission, or bringing about population suppression. Several of these systems, including Medea, UDMEL, and site-specific nucleases, which can be used to drive genes into populations or bring about population suppression, utilize transcriptional regulatory elements that drive germline-specific expression. Here we report the identification of multiple regulatory elements able to drive gene expression specifically in the female germline, or in the male and female germline, in the mosquito Aedes aegypti. These elements can also be used as tools with which to probe the roles of specific genes in germline function and in the early embryo, through overexpression or RNA interference.

  7. Toward Distinct Element Method Simulations of Carbon Nanotube Systems

    Science.gov (United States)

    Akatyeva, Evgeniya; Anderson, Tyler; Nikiforov, Ilia; Potyondy, David; Ballarini, Roberto; Dumitrica, Traian

    2011-03-01

    We propose distinct element method modeling of carbon nanotube systems. The atomic-level description of an individual nanotube is coarse-grained into a chain of spherical elements that interact by parallel bonds located at their contacts. The spherical elements can lump multiple translational unit cells of the carbon nanotube and have both translational and rotational degrees of freedom. The discrete long ranged interaction between nanotubes is included in a van der Waals contact of nonmechanical nature that acts simultaneously with the parallel bonds. The created mesoscopic model is put into service by simulating a realistic carbon nanotube ring. The ring morphology arises from the energy balance stored in both parallel and van der Waals bonds. We thank NSF CAREER under Grant No. CMMI-0747684, NSF under Grant No. CMMI 0800896.

  8. Caregivers of multiple myeloma survivors.

    Science.gov (United States)

    Kurtin, Sandra; Lilleby, Kathryn; Spong, Jacy

    2013-12-01

    Patients living with multiple myeloma (MM) face complex decisions throughout their journey relative to their diagnosis, options for treatment, and how their disease and treatment choices may affect them physically, emotionally, financially, and spiritually. Patients considering a hematopoietic stem cell transplantation face specific self-management challenges. The availability of a reliable caregiver is a prerequisite to transplantation eligibility. Currently, the majority of clinical management is episodic and provided in the outpatient setting. Therefore, the bulk of care for patients living with MM is provided by the patient together with his or her caregivers. Caregivers face similar challenges to those faced by the patient living with MM. They are required to take in complex information, perform often complicated or technical procedures such as line care or injections, assist the patient with activities of daily living, and attend the myriad of appointments required. Understanding the dynamics of the patient-caregiver relationship, the strengths and weaknesses unique to that relationship, common elements of caregiver stress or strain, and available tools and strategies to promote a sense of control and enhance self-management skills may improve the health-related quality of life for both the patient with MM and his or her caregiver.

  9. Spectral response of multi-element silicon detectors

    Energy Technology Data Exchange (ETDEWEB)

    Ludewigt, B.A.; Rossington, C.S.; Chapman, K. [Univ. of California, Berkeley, CA (United States)

    1997-04-01

    Multi-element silicon strip detectors, in conjunction with integrated circuit pulse-processing electronics, offer an attractive alternative to conventional lithium-drifted silicon Si(Li) and high purity germanium detectors (HPGe) for high count rate, low noise synchrotron x-ray fluorescence applications. One of the major differences between the segmented Si detectors and the commercially available single-element Si(Li) or HPGe detectors is that hundreds of elements can be fabricated on a single Si substrate using standard silicon processing technologies. The segmentation of the detector substrate into many small elements results in very low noise performance at or near, room temperature, and the count rate of the detector is increased many-fold due to the multiplication in the total number of detectors. Traditionally, a single channel of detector with electronics can handle {approximately}100 kHz count rates while maintaining good energy resolution; the segmented detectors can operate at greater than MHz count rates merely due to the multiplication in the number of channels. One of the most critical aspects in the development of the segmented detectors is characterizing the charge sharing and charge loss that occur between the individual detector strips, and determining how these affect the spectral response of the detectors.

  10. Generalized multiscale finite element methods: Oversampling strategies

    KAUST Repository

    Efendiev, Yalchin R.

    2014-01-01

    In this paper, we propose oversampling strategies in the generalized multiscale finite element method (GMsFEM) framework. The GMsFEM, which has been recently introduced in Efendiev et al. (2013b) [Generalized Multiscale Finite Element Methods, J. Comput. Phys., vol. 251, pp. 116-135, 2013], allows solving multiscale parameter-dependent problems at a reduced computational cost by constructing a reduced-order representation of the solution on a coarse grid. The main idea of the method consists of (1) the construction of snapshot space, (2) the construction of the offline space, and (3) construction of the online space (the latter for parameter-dependent problems). In Efendiev et al. (2013b) [Generalized Multiscale Finite Element Methods, J. Comput. Phys., vol. 251, pp. 116-135, 2013], it was shown that the GMsFEM provides a flexible tool to solve multiscale problems with a complex input space by generating appropriate snapshot, offline, and online spaces. In this paper, we develop oversampling techniques to be used in this context (see Hou and Wu (1997) where oversampling is introduced for multiscale finite element methods). It is known (see Hou and Wu (1997)) that the oversampling can improve the accuracy of multiscale methods. In particular, the oversampling technique uses larger regions (larger than the target coarse block) in constructing local basis functions. Our motivation stems from the analysis presented in this paper, which shows that when using oversampling techniques in the construction of the snapshot space and offline space, GMsFEM will converge independent of small scales and high contrast under certain assumptions. We consider the use of a multiple eigenvalue problems to improve the convergence and discuss their relation to single spectral problems that use oversampled regions. The oversampling procedures proposed in this paper differ from those in Hou and Wu (1997). In particular, the oversampling domains are partially used in constructing local

  11. Spectral element simulation of ultrafiltration

    DEFF Research Database (Denmark)

    Hansen, M.; Barker, Vincent A.; Hassager, Ole

    1998-01-01

    A spectral element method for simulating stationary 2-D ultrafiltration is presented. The mathematical model is comprised of the Navier-Stokes equations for the velocity field of the fluid and a transport equation for the concentration of the solute. In addition to the presence of the velocity...... vector in the transport equation, the system is coupled by the dependency of the fluid viscosity on the solute concentration and by a concentration-dependent boundary condition for the Navier-Stokes equations at the membrane surface. The spectral element discretization yields a nonlinear algebraic system....... The performance of the spectral element code when applied to several ultrafiltration problems is reported. (C) 1998 Elsevier Science Ltd. All rights reserved....

  12. Physical model of Nernst element

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Hiroaki [Venture Business Lab., Nagoya Univ., Nagoya (Japan); Ikeda, Kazuaki; Yamaguchi, Satarou

    1998-08-01

    Generation of electric power by the Nernst effect is a new application of a semiconductor. A key point of this proposal is to find materials with a high thermomagnetic figure-of-merit, which are called Nernst elements. In order to find candidates of the Nernst element, a physical model to describe its transport phenomena is needed. As the first model, we began with a parabolic two-band model in classical statistics. According to this model, we selected InSb as candidates of the Nernst element and measured their transport coefficients in magnetic fields up to 4 Tesla within a temperature region from 270 K to 330 K. In this region, we calculated transport coefficients numerically by our physical model. For InSb, experimental data are coincident with theoretical values in strong magnetic field. (author)

  13. Mechanical Analogies of Fractional Elements

    Institute of Scientific and Technical Information of China (English)

    HU Kai-Xin; ZHU Ke-Qin

    2009-01-01

    A Fractional element model describes a special kind of viscoelastic material.Its stress is proportional to the fractional-order derivative of strain. Physically the mechanical analogies of fractional elements can be represented by spring-dashpot fractal networks. We introduce a constitutive operator in the constitutive equations of viscoelastic materials.To derive constitutive operators for spring-dashpot fractal networks, we use Heaviside operational calculus, which provides explicit answers not otherwise obtainable simply.Then the series-parallel formulas for the constitutive operator are derived. Using these formulas, a constitutive equation of fractional element with 1/2-order derivative is obtained.Finally we find the way to derive the constitutive equations with other fractional-order derivatives and their mechanical analogies.

  14. SUPERCONVERGENCE ANALYSIS FOR CUBIC TRIANGULAR ELEMENT OF THE FINITE ELEMENT

    Institute of Scientific and Technical Information of China (English)

    Qi-ding Zhu

    2000-01-01

    In this paper, we construct a projection interpolation for cubic triangular ele- ment by using othogonal expansion triangular method. We show two fundamental formulas of estimation on a special partion and obtain a superconvergence result of 1 -e order higher for the placement function and its tangential derivative on the third order Lobatto points and Gauss points on each edge of triangular element.

  15. What Is Multiple Myeloma?

    Science.gov (United States)

    ... are truly malignant, not just slow growing. Because people with MGUS are generally elderly, they may not live long enough for it ... a solitary plasmacytoma will develop multiple myeloma, these people are watched closely for signs of this disease. ... The American Cancer Society medical and editorial content team Our team is ...

  16. Zinc in multiple sclerosis

    DEFF Research Database (Denmark)

    Bredholt, Mikkel; Fredriksen, Jette Lautrup

    2016-01-01

    In the last 35 years, zinc (Zn) has been examined for its potential role in the disease multiple sclerosis (MS). This review gives an overview of the possible role of Zn in the pathogenesis of MS as well as a meta-analysis of studies having measured Zn in serum or plasma in patients with MS...

  17. [Therapies in multiple sclerosis].

    Science.gov (United States)

    Kesselring, Jürg

    2013-08-21

    Although there is still no cure for Multiple Sclerosis (MS), effective strategies are available to modify the disease course, to treat relapses, to manage symptoms, to improve functions, and to provide emotional support. In combination, these treatments enhance the quality of life for people living with MS.

  18. Multiple Grammars and MOGUL

    Science.gov (United States)

    Truscott, John

    2014-01-01

    Optionality is a central phenomenon in second language acquisition (SLA), for which any adequate theory must account. Amaral and Roeper (this issue; henceforth A&R) offer an appealing approach to it, using Roeper's Multiple Grammars Theory, which was created with first language in mind but which extends very naturally to SLA. They include…

  19. Networks amid multiple logics

    DEFF Research Database (Denmark)

    Bergenholtz, Carsten; Bjerregaard, Toke

    The present study investigates how a high-tech-small-firm (HTSF) can carry out an inter-organizational search of actors located at universities. Responding to calls to study how firms navigate multiple institutional norms, this research examines the different strategies used by a HTSF to balance ...

  20. Golden Coded Multiple Beamforming

    CERN Document Server

    Li, Boyu

    2010-01-01

    The Golden Code is a full-rate full-diversity space-time code, which achieves maximum coding gain for Multiple-Input Multiple-Output (MIMO) systems with two transmit and two receive antennas. Since four information symbols taken from an M-QAM constellation are selected to construct one Golden Code codeword, a maximum likelihood decoder using sphere decoding has the worst-case complexity of O(M^4), when the Channel State Information (CSI) is available at the receiver. Previously, this worst-case complexity was reduced to O(M^(2.5)) without performance degradation. When the CSI is known by the transmitter as well as the receiver, beamforming techniques that employ singular value decomposition are commonly used in MIMO systems. In the absence of channel coding, when a single symbol is transmitted, these systems achieve the full diversity order provided by the channel. Whereas this property is lost when multiple symbols are simultaneously transmitted. However, uncoded multiple beamforming can achieve the full div...

  1. Multiple Primary Cancer Monograph

    Science.gov (United States)

    To identify groups of cancer survivors that are at increased risk for multiple primary cancers, investigators led an effort to provide the first comprehensive population-based analysis of the risk of subsequent cancer in the U.S., resulting in a monograph.

  2. Multiple snapshot compressive beamforming

    DEFF Research Database (Denmark)

    Gerstoft, Peter; Xenaki, Angeliki; Mecklenbrauker, Christoph F.

    2015-01-01

    For sound fields observed on an array, compressive sensing (CS) reconstructs the multiple source signals at unknown directions-of-arrival (DOAs) using a sparsity constraint. The DOA estimation is posed as an underdetermined problem expressing the field at each sensor as a phase-lagged superposition...

  3. Tremor in multiple sclerosis

    NARCIS (Netherlands)

    Koch, Marcus; Mostert, Jop; Heersema, Dorothea; De Keyser, Jacques

    2007-01-01

    Tremor is estimated to occur in about 25 to 60 percent of patients with multiple sclerosis (MS). This symptom, which can be severely disabling and embarrassing for patients, is difficult to manage. Isoniazid in high doses, carbamazepine, propranolol and gluthetimide have been reported to provide som

  4. Soil carbon, multiple benefits

    NARCIS (Netherlands)

    Milne, E.; Banwart, S.A.; Noellemeyer, E.; Abson, D.J.; Ballabio, C.; Bampa, F.; Bationo, A.; Batjes, N.H.; Bernoux, M.; Bhattacharyya, T.

    2015-01-01

    In March 2013, 40 leading experts from across the world gathered at a workshop, hosted by the European Commission, Directorate General Joint Research Centre, Italy, to discuss the multiple benefits of soil carbon as part of a Rapid Assessment Process (RAP) project commissioned by Scientific

  5. Multiple Access Communications

    DEFF Research Database (Denmark)

    This book constitutes the proceedings of the 9th International Workshop on Multiple Access Communications, MACOM 2016, held in Aalborg, Denmark, in November 2016. The 10 full papers presented in this volume were carefully reviewed and selected from 12 submissions. They were organized in topical...

  6. Multiple Chemical Sensitivity

    DEFF Research Database (Denmark)

    Junge, Anne Gram

    Et voksende antal mennesker i Danmark oplever at være overfølsomme over for dufte og kemikalier. Imidlertid er den tilskrevne diagnose Multiple Chemical Sensitivity (MCS) ikke medicinsk anerkendt i Danmark pga. mangel på organiske og patofysiologisk basis for symptomerne. Dette speciale bygger på...

  7. Diabetes Medicines - Multiple Languages

    Science.gov (United States)

    ... V W XYZ List of All Topics All Diabetes Medicines - Multiple Languages To use the sharing features on this page, please enable JavaScript. Arabic (العربية) Chinese, Simplified (Mandarin dialect) (简体中文) Chinese, Traditional (Cantonese dialect) ( ...

  8. Multiple personality disorder.

    Science.gov (United States)

    Salama, A A

    1995-02-01

    This paper presents a description of Multiple Personality Disorder--its development, etiology, and presentation. The paper stresses the criteria for diagnosis that can help professionals to identify individuals at an early stage. An overview of treatment approaches and indications for hospitalization, length of treatment, and goals are also explained.

  9. Zinc in Multiple Sclerosis

    DEFF Research Database (Denmark)

    Bredholt, Mikkel; Frederiksen, Jette Lautrup

    2016-01-01

    In the last 35 years, zinc (Zn) has been examined for its potential role in the disease multiple sclerosis (MS). This review gives an overview of the possible role of Zn in the pathogenesis of MS as well as a meta-analysis of studies having measured Zn in serum or plasma in patients with MS...

  10. The Future Multiple

    DEFF Research Database (Denmark)

    Spaniol, Matthew Jon; Rowland, Nicholas James

    2015-01-01

    , if “the future” were so preposterous an idea, then “futures” would cease to be a critical alternative to it. Futures needs the future; they are relationally bound together in a multiplicity. This paper considers what such a logical reality implies for a field that distances itself from the future and self...

  11. Multiple external root resorption.

    Science.gov (United States)

    Yusof, W Z; Ghazali, M N

    1989-04-01

    Presented is an unusual case of multiple external root resorption. Although the cause of this resorption was not determined, several possibilities are presented. Trauma from occlusion, periodontal and pulpal inflammation, and resorption of idiopathic origin are all discussed as possible causes.

  12. Fractal elements and their applications

    CERN Document Server

    Gil’mutdinov, Anis Kharisovich; El-Khazali, Reyad

    2017-01-01

    This book describes a new type of passive electronic components, called fractal elements, from a theoretical and practical point of view. The authors discuss in detail the physical implementation and design of fractal devices for application in fractional-order signal processing and systems. The concepts of fractals and fractal signals are explained, as well as the fundamentals of fractional calculus. Several implementations of fractional impedances are discussed, along with comparison of their performance characteristics. Details of design, schematics, fundamental techniques and implementation of RC-based fractal elements are provided. .

  13. Transposable elements and circular DNAs

    KAUST Repository

    Mourier, Tobias

    2016-09-26

    Circular DNAs are extra-chromosomal fragments that become circularized by genomic recombination events. We have recently shown that yeast LTR elements generate circular DNAs through recombination events between their flanking long terminal repeats (LTRs). Similarly, circular DNAs can be generated by recombination between LTRs residing at different genomic loci, in which case the circular DNA will contain the intervening sequence. In yeast, this can result in gene copy number variations when circles contain genes and origins of replication. Here, I speculate on the potential and implications of circular DNAs generated through recombination between human transposable elements.

  14. Finite elements of nonlinear continua

    CERN Document Server

    Oden, J T

    2000-01-01

    Geared toward undergraduate and graduate students, this text extends applications of the finite element method from linear problems in elastic structures to a broad class of practical, nonlinear problems in continuum mechanics. It treats both theory and applications from a general and unifying point of view.The text reviews the thermomechanical principles of continuous media and the properties of the finite element method, and then brings them together to produce discrete physical models of nonlinear continua. The mathematical properties of these models are analyzed, along with the numerical s

  15. Organic chemistry of elemental phosphorus

    Energy Technology Data Exchange (ETDEWEB)

    Milyukov, V A; Budnikova, Yulia H; Sinyashin, Oleg G [A.E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Scientific Centre of the Russian Academy of Sciences, Kazan (Russian Federation)

    2005-09-30

    The principal achievements and the modern trends in the development of the chemistry of elemental phosphorus are analysed, described systematically and generalised. The possibilities and advantages of the preparation of organophosphorus compounds directly from white phosphorus are demonstrated. Attention is focused on the activation and transformation of elemental phosphorus in the coordination sphere of transition metal complexes. The mechanisms of the reactions of white phosphorus with nucleophilic and electrophilic reagents are discussed. Electrochemical approaches to the synthesis of organic phosphorus derivatives based on white phosphorus are considered.

  16. FINITE ELEMENT ANALYSIS OF STRUCTURES

    Directory of Open Access Journals (Sweden)

    PECINGINA OLIMPIA-MIOARA

    2015-05-01

    Full Text Available The application of finite element method is analytical when solutions can not be applied for deeper study analyzes static, dynamic or other types of requirements in different points of the structures .In practice it is necessary to know the behavior of the structure or certain parts components of the machine under the influence of certain factors static and dynamic . The application of finite element in the optimization of components leads to economic growth , to increase reliability and durability organs studied, thus the machine itself.

  17. Elements of spatial data quality

    CERN Document Server

    Guptill, SC

    1995-01-01

    Elements of Spatial Data Quality outlines the need and suggests potential categories for the content of a comprehensive statement of data quality that must be imbedded in the metadata that accompanies the transfer of a digital spatial data file or is available in a separate metadata catalog. Members of the International Cartographic Association's Commission on Spatial Data Quality have identified seven elements of data quality: positional accuracy, attribute accuracy, completeness, logical consistency, lineage, semantic accuracy and temporal information. In the book the authors describe: compo

  18. A high temperature fuel element

    Energy Technology Data Exchange (ETDEWEB)

    Sekido, A.; Nakai, M.; Ninomiya, Y.

    1982-12-21

    A solid electrolyte which conducts electricity with heating by oxygen ions and operates at a temperature of 1,000C is used in the element. The cathode, besides the ionic conductivity in oxygen, has an electron conductivity. The anode has electron conductivity. Substances such as Bi203, into which oxides of alkaline earth metals are added, are used for making the cathode. The electrolyte consists of ZrO2 and Y2O3, to which CaO is added. WC, to which an H2 type fuel is fed, serves as the anode. The element has a long service life.

  19. ANALYSIS OF FAILURE MECHANISM IN MULTIPLE DISC WET BRAKES

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    By the numberical calculation of dynamic lining pressure distributions,temperature fields and thermal stress fields of steel plates,a method using nonlinear finite element techniques to analyze failure mechanism of a multiple disc wet brake is detailed ,and some measures for combatting these failures are provided.

  20. Expected Value Method for Fuzzy Multiple Attribute Decision Making

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    This paper presents a fuzzy multiple attribute decision-making (FMADM) method in which the attribute weights and decision matrix elements (attribute values) are fuzzy variables. Fuzzy arithmetic and the expected value operator of fuzzy variables are used to develop the expected value method to solve the FMADM problem. A numerical example is given to demonstrate the feasibility and effectiveness of the method.

  1. A 3D pyramid spline element

    Institute of Scientific and Technical Information of China (English)

    Juan Chen; Chong-Jun Li; Wan-Ji Chen

    2011-01-01

    In this paper,a 13-node pyramid spline element is derived by using the tetrahedron volume coordinates and the B-net method,which achieves the second order completeness in Cartesian coordinates.Some appropriate examples were employed to evaluate the performance of the proposed element.The numerical results show that the spline element has much better performance compared with the isoparametric serendipity element Q20 and its degenerate pyramid element P13 especially when mesh is distorted,and it is comparable to the Lagrange element Q27.It has been demonstrated that the spline finite element method is an efficient tool for developing high accuracy elements.

  2. Nuclear fuel elements design, fabrication and performance

    CERN Document Server

    Frost, Brian R T

    1982-01-01

    Nuclear Fuel Elements: Design, Fabrication and Performance is concerned with the design, fabrication, and performance of nuclear fuel elements, with emphasis on fast reactor fuel elements. Topics range from fuel types and the irradiation behavior of fuels to cladding and duct materials, fuel element design and modeling, fuel element performance testing and qualification, and the performance of water reactor fuels. Fast reactor fuel elements, research and test reactor fuel elements, and unconventional fuel elements are also covered. This volume consists of 12 chapters and begins with an overvie

  3. Mango: multiple alignment with N gapped oligos.

    Science.gov (United States)

    Zhang, Zefeng; Lin, Hao; Li, Ming

    2008-06-01

    Multiple sequence alignment is a classical and challenging task. The problem is NP-hard. The full dynamic programming takes too much time. The progressive alignment heuristics adopted by most state-of-the-art works suffer from the "once a gap, always a gap" phenomenon. Is there a radically new way to do multiple sequence alignment? In this paper, we introduce a novel and orthogonal multiple sequence alignment method, using both multiple optimized spaced seeds and new algorithms to handle these seeds efficiently. Our new algorithm processes information of all sequences as a whole and tries to build the alignment vertically, avoiding problems caused by the popular progressive approaches. Because the optimized spaced seeds have proved significantly more sensitive than the consecutive k-mers, the new approach promises to be more accurate and reliable. To validate our new approach, we have implemented MANGO: Multiple Alignment with N Gapped Oligos. Experiments were carried out on large 16S RNA benchmarks, showing that MANGO compares favorably, in both accuracy and speed, against state-of-the-art multiple sequence alignment methods, including ClustalW 1.83, MUSCLE 3.6, MAFFT 5.861, ProbConsRNA 1.11, Dialign 2.2.1, DIALIGN-T 0.2.1, T-Coffee 4.85, POA 2.0, and Kalign 2.0. We have further demonstrated the scalability of MANGO on very large datasets of repeat elements. MANGO can be downloaded at http://www.bioinfo.org.cn/mango/ and is free for academic usage.

  4. Multiple sine, multiple elliptic gamma functions and rational cones

    CERN Document Server

    Tizzano, Luigi

    2015-01-01

    We define generalizations of the multiple elliptic gamma functions and the multiple sine functions, labelled by rational cones in $\\mathbb{R}^r$. For $r=2,3$ we prove that the generalized multiple elliptic gamma functions enjoy a modular property determined by the cone. This generalizes the modular properties of the elliptic gamma function studied by Felder and Varchenko. The generalized multiple sine enjoy a related infinite product representation, generalizing the results of Narukawa for the ordinary multiple sine functions.

  5. Small Multiples with Gaps.

    Science.gov (United States)

    Meulemans, Wouter; Dykes, Jason; Slingsby, Aidan; Turkay, Cagatay; Wood, Jo

    2017-01-01

    Small multiples enable comparison by providing different views of a single data set in a dense and aligned manner. A common frame defines each view, which varies based upon values of a conditioning variable. An increasingly popular use of this technique is to project two-dimensional locations into a gridded space (e.g. grid maps), using the underlying distribution both as the conditioning variable and to determine the grid layout. Using whitespace in this layout has the potential to carry information, especially in a geographic context. Yet, the effects of doing so on the spatial properties of the original units are not understood. We explore the design space offered by such small multiples with gaps. We do so by constructing a comprehensive suite of metrics that capture properties of the layout used to arrange the small multiples for comparison (e.g. compactness and alignment) and the preservation of the original data (e.g. distance, topology and shape). We study these metrics in geographic data sets with varying properties and numbers of gaps. We use simulated annealing to optimize for each metric and measure the effects on the others. To explore these effects systematically, we take a new approach, developing a system to visualize this design space using a set of interactive matrices. We find that adding small amounts of whitespace to small multiple arrays improves some of the characteristics of 2D layouts, such as shape, distance and direction. This comes at the cost of other metrics, such as the retention of topology. Effects vary according to the input maps, with degree of variation in size of input regions found to be a factor. Optima exist for particular metrics in many cases, but at different amounts of whitespace for different maps. We suggest multiple metrics be used in optimized layouts, finding topology to be a primary factor in existing manually-crafted solutions, followed by a trade-off between shape and displacement. But the rich range of possible

  6. Backfire antennas with dipole elements

    DEFF Research Database (Denmark)

    Nielsen, Erik Dragø; Pontoppidan, Knud

    1970-01-01

    A method is set up for a theoretical investigation of arbitrary backfire antennas based upon dipole structures. The mutual impedance between the dipole elements of the antenna is taken into account, and the field radiated due to a surface wave reflector of finite extent is determined by calculating...

  7. Actinomycete integrative and conjugative elements

    NARCIS (Netherlands)

    Poele, Evelien M. te; Bolhuis, Henk; Dijkhuizen, Lubbert

    2008-01-01

    This paper reviews current knowledge on actinomycete integrative and conjugative elements (AICEs). The best characterised AICEs, pSAM2 of Streptomyces ambofaciens (10.9 kb), SLP1 (17.3 kb) of Streptomyces coelicolor and pMEA300 of Amycolatopsis methanolica (13.3 kb), are present as integrative eleme

  8. Evidence for primordial superheavy elements

    Energy Technology Data Exchange (ETDEWEB)

    Gentry, R.V.; Cahill, T.A.; Fletcher, N.R.; Kaufmann, H.C.; Medsker, L.R.; Nelson, J.W.; Flocchini, R.G.

    1976-07-05

    Microscopic crystalline monazite inclusions showing giant halo formation in biotite mica have been analyzed by the method of proton-induced x-ray emission. The observed x-ray energy spectra are best explained by the presence of a number of superheavy elements. (AIP)

  9. Environmental research on actinide elements

    Energy Technology Data Exchange (ETDEWEB)

    Pinder, J.E. III; Alberts, J.J.; McLeod, K.W.; Schreckhise, R.G. (eds.)

    1987-08-01

    The papers synthesize the results of research sponsored by DOE's Office of Health and Environmental Research on the behavior of transuranic and actinide elements in the environment. Separate abstracts have been prepared for the 21 individual papers. (ACR)

  10. On Gothic Elements in Beloved

    Institute of Scientific and Technical Information of China (English)

    任欢

    2016-01-01

    Toni Morrison,a well-known female writer,won Nobel Prize for literature in 1993.Beloved,her fifth novel,wins great popu-larity among readers and it is famous for adopting gothic genre to represent black people’s trauma and deal with it.This paper aims at analy-zing the gothic elements demonstrated in this novel.

  11. Gothic Elements in Folding Beijing

    Institute of Scientific and Technical Information of China (English)

    Hua Yan

    2016-01-01

    The study claims that Folding Beijing can not only be read as science fiction but also as Gothic literature,in which perspective,Gothic Elements such as Gothic Setting, Gothic Wanderer and Transgressions,and Gothic Terror are discussed respectively.

  12. Dynamic and Transient Infinite Elements

    CERN Document Server

    Zhao, Chongbin

    2009-01-01

    Intends to provide the theory and the application of dynamic and transient infinite elements for simulating the far fields of infinite domains involved in many of scientific and engineering problems, based on the author's own work over the years. This title is suitable for computational geoscientists, geotechnical engineers, and civil engineers.

  13. Elements of a Spatial Web

    DEFF Research Database (Denmark)

    Jensen, Christian S.

    2010-01-01

    and are relevant to a text argument. An important element in enabling such queries is to be able to rank spatial web objects. Another is to be able to determine the relevance of an object to a query. Yet another is to enable the efficient processing of such queries. The talk covers recent results on spatial web...

  14. Compact Fuel Element Environment Test

    Science.gov (United States)

    Bradley, D. E.; Mireles, O. R.; Hickman, R. R.; Broadway, J. W.

    2012-01-01

    Deep space missions with large payloads require high specific impulse (I(sub sp)) and relatively high thrust to achieve mission goals in reasonable time frames. Conventional, storable propellants produce average I(sub sp). Nuclear thermal rockets (NTRs) capable of high I(sub sp) thrust have been proposed. NTR employs heat produced by fission reaction to heat and therefore accelerate hydrogen, which is then forced through a rocket nozzle providing thrust. Fuel element temperatures are very high (up to 3,000 K) and hydrogen is highly reactive with most materials at high temperatures. Data covering the effects of high-temperature hydrogen exposure on fuel elements are limited. The primary concern is the mechanical failure of fuel elements that employ high melting point metals, ceramics, or a combination (cermet) as a structural matrix into which the nuclear fuel is distributed. It is not necessary to include fissile material in test samples intended to explore high-temperature hydrogen exposure of the structural support matrices. A small-scale test bed designed to heat fuel element samples via noncontact radio frequency heating and expose samples to hydrogen for typical mission durations has been developed to assist in optimal material and manufacturing process selection without employing fissile material. This Technical Memorandum details the test bed design and results of testing conducted to date.

  15. High performance rolling element bearing

    Science.gov (United States)

    Bursey, Jr., Roger W. (Inventor); Olinger, Jr., John B. (Inventor); Owen, Samuel S. (Inventor); Poole, William E. (Inventor); Haluck, David A. (Inventor)

    1993-01-01

    A high performance rolling element bearing (5) which is particularly suitable for use in a cryogenically cooled environment, comprises a composite cage (45) formed from glass fibers disposed in a solid lubricant matrix of a fluorocarbon polymer. The cage includes inserts (50) formed from a mixture of a soft metal and a solid lubricant such as a fluorocarbon polymer.

  16. Presidential elements in government: introduction

    NARCIS (Netherlands)

    Reestman, J.H.

    2006-01-01

    The editorial board of the European Constitutional Law Review has solicited a number of contributions on presidential elements in government systems in Europe. At the origin of the project are some recent sweeping interventions of heads of state in the political arena. These are notably the (suspens

  17. Naturalistic Elements in Sister Carrie

    Institute of Scientific and Technical Information of China (English)

    刘艳晖

    2007-01-01

    @@ Theodore Dreiser is considered to be a controversial writer.His first novel.Sister Carrie makes a new way of presenting re-ality.This paper discusses the naturalistic elements from the de-tailed description of the environment in that society.

  18. Trace elements: implications for nursing.

    Science.gov (United States)

    Hayter, J

    1980-01-01

    Although most were unknown a few years ago, present evidence indicates that at least 25 trace elements have some pertinence to health. Unlike vitamins, they cannot be synthesized. Some trace elements are now considered important only because of their harmful effects but traces of them may be essential. Zinc is especially important during puberty, pregnancy and menopause and is related to protein metabolism. Both fluoride and cadmium accumulate in the body year after year. Cadmium is positively correlated with several chronic diseases, especially hypertension. It is obtained from smoking and drinking soft water. Silicon, generally associated with silicosis, may be necessary for healthy bone and connective tissue. Chromium, believed to be the glucose tolerance factor, is obtained from brewer's yeast, spices, and whole wheat products. Copper deficiency may be implicated in a wide range of cardiovascular and blood related disorders. Either marginal deficiencies or slight excesses of most trace elements are harmful. Nurses should instruct patients to avoid highly refined foods, fad diets, or synthetic and fabricated foods. A well balanced and varied diet is the best safeguard against trace element excesses or deficiencies.

  19. Structural optimization for multiple structure cases and multiple payload cases with a two-level multipoint approximation method

    Institute of Scientific and Technical Information of China (English)

    An Haichao; Chen Shenyan; Huang Hai

    2016-01-01

    This paper is to address structural optimization problems where multiple structure cases or multiple payload cases can be considered simultaneously. Both types of optimization problems involve multiple finite element models at each iteration step, which draws high demands in opti-mization methods. Considering the common characteristic for these two types of problems, which is that the design domain keeps the same no matter what the structure cases or payload cases are, both problems can be formulated into the unified expressions. A two-level multipoint approxima-tion (TMA) method is firstly improved with the use of analytical sensitivity analysis for structural mass, and then this improved method is utilized to tackle these two types of problems. Based on the commercial finite element software MSC.Patran/Nastran, an optimization system for multiple structure cases and multiple payload cases is developed. Numerical examples are conducted to ver-ify its feasibility and efficiency, and the necessity for the simultaneous optimizations of multiple structure cases and multiple payload cases are illustrated as well.

  20. Patients with multiple contact allergies

    DEFF Research Database (Denmark)

    Carlsen, Berit Christina; Andersen, Klaus Ejner; Menné, Torkil;

    2008-01-01

    Patients with multiple contact allergies, also referred to as polysensitized, are more frequent than predicted from prevalence of single sensitivities. The understanding of why some people develop multiple contact allergies, and characterization of patients with multiple contact allergies...... of developing multiple contact allergies. Evidence of allergen clusters among polysensitized individuals is also reviewed. The literature supports the idea that patients with multiple contact allergies constitute a special entity within the field of contact allergy. There is no generally accepted definition...... of patients with multiple contact allergies. We suggest that contact allergy to 3 or more allergens are defined as multiple contact allergies....

  1. Trace elements and rat pouchitis.

    Science.gov (United States)

    Drzymała-Czyż, Sławomira; Banasiewicz, Tomasz; Walas, Stanisław; Kościński, Tomasz; Wenska-Chyży, Ewa; Drews, Michał; Walkowiak, Jarosław

    2012-01-01

    The procedure of restorative proctocolectomy is associated with a complete removal of the colon and slight reduction of ileum length, which together can lead to systemic shortages of trace elements. Inflammatory changes in the pouch mucosa may also have some impact. However, there is no data on trace elements in pouchitis. Therefore, in the present study we aimed to assess the effect of acute pouchitis on the status of selected trace elements in rats. Restorative proctocolectomy with the construction of intestinal J-pouch was performed in twenty-four Wistar rats. Three weeks after the surgery, pouchitis was induced. Eight untreated rats created the control group. Liver concentrations of selected micronutrients (Zn, Cu, Co, Mn, Se) were measured in both groups six weeks later, using inductively coupled plasma mass spectrometry. Liver concentrations of trace elements did not differ between the study and the control groups. However, copper, cobalt and selenium concentrations [μg/g] were statistically lower (p<0.02, p<0.05 and p<0.04, respectively) in rats with severe pouchitis (n=9) as compared with rats with mild pouchitis (n=7) [median (range): Cu--7.05 (3.02-14.57) vs 10.47 (5.16-14.97); Co--0.55 (0.37-0.96) vs 0.61 (0.52-0.86); Se--1.17 (0.69-1.54) vs 1.18 (0.29-1.91)]. In conclusion, it seems that acute pouchitis can lead to a significant deficiency of trace elements.

  2. Vaccines and multiple sclerosis

    DEFF Research Database (Denmark)

    Mailand, Mia Topsøe; Frederiksen, Jette Lautrup

    2017-01-01

    Vaccinations are often the most effective tool against some disease known to mankind. This study offers a literature review on the role of vaccines regarding the risk of developing multiple sclerosis (MS) and MS relapse. The method used in this study is a systematic literature review...... on the database PubMed. The study found no change in risk of developing multiple sclerosis (MS) after vaccination against hepatitis B virus, human papillomavirus, seasonal influenza, measles-mumps-rubella, variola, tetanus, Bacillus Calmette-Guérin (BCG), polio, or diphtheria. No change in risk of relapse...... was found for influenza. Further research is needed for the potential therapeutic use of the BCG vaccine in patients in risk of developing MS and for the preventive potential of the tetanus and diphtheria vaccine....

  3. Curability of Multiple Myeloma

    Directory of Open Access Journals (Sweden)

    Raymond Alexanian

    2012-01-01

    Full Text Available Among 792 patients with multiple myeloma treated from 1987 to 2010 and assessed after 18 months, there were 167 patients with complete remission. For those 60 patients treated between 1987–1998 and with long followup, the latest relapse occurred after 11.8 years, so that 13 patients have remained in sustained complete remission for longer than 12 years (range 12–22 years. These results suggest that 3% of all patients treated during that period may be cured of multiple myeloma. In addition to immunofixation, more sensitive techniques for the detection of residual disease should be applied more consistently in patients with apparent complete remission in order to identify those with potential cure.

  4. Treatment of multiple myeloma.

    Science.gov (United States)

    Rajkumar, S Vincent

    2011-04-26

    The treatment of multiple myeloma has changed dramatically in the past decade. The increase in the number of active agents has generated numerous possible drug combinations that can be used in the first-line and relapsed settings. As a result, there is considerable confusion about the choice of regimens for initial therapy, role of transplantation in the era of new drugs, end points for therapy, and the role of maintenance therapy. A hotly debated area is whether treatment approaches should achieve cure or disease control, which impacts greatly on the treatment strategy employed. This article provides an update on the treatment of multiple myeloma, with a focus on recent advances, newly diagnosed disease, role of transplantation and maintenance therapy. A synthesized approach to the treatment of myeloma is presented, along with a discussion of key paradigms that need to be challenged.

  5. Constellation Precoded Multiple Beamforming

    CERN Document Server

    Park, Hong Ju; Ayanoglu, Ender

    2009-01-01

    Beamforming techniques that employ Singular Value Decomposition (SVD) are commonly used in Multi-Input Multi-Output (MIMO) wireless communication systems. In the absence of channel coding, when a single symbol is transmitted, these systems achieve the full diversity order provided by the channel; whereas when multiple symbols are simultaneously transmitted, this property is lost. When channel coding is employed, full diversity order can be achieved. For example, when Bit-Interleaved Coded Modulation (BICM) is combined with this technique, full diversity order of NM in an MxN MIMO channel transmitting S parallel streams is possible, provided a condition on S and the BICM convolutional code rate is satisfied. In this paper, we present constellation precoded multiple beamforming which can achieve the full diversity order both with BICM-coded and uncoded SVD systems. We provide an analytical proof of this property. To reduce the computational complexity of Maximum Likelihood (ML) decoding in this system, we emplo...

  6. On Using Particle Finite Element for Hydrodynamics Problems Solving

    Directory of Open Access Journals (Sweden)

    E. V. Davidova

    2015-01-01

    Full Text Available The aim of the present research is to develop software for the Particle Finite Element Method (PFEM and its verification on the model problem of viscous incompressible flow simulation in a square cavity. The Lagrangian description of the medium motion is used: the nodes of the finite element mesh move together with the fluid that allows to consider them as particles of the medium. Mesh cells deform when in time-stepping procedure, so it is necessary to reconstruct the mesh to provide stability of the finite element numerical procedure.Meshing algorithm allows us to obtain the mesh, which satisfies the Delaunay criteria: it is called \\the possible triangles method". This algorithm is based on the well-known Fortune method of Voronoi diagram constructing for a certain set of points in the plane. The graphical representation of the possible triangles method is shown. It is suitable to use generalization of Delaunay triangulation in order to construct meshes with polygonal cells in case of multiple nodes close to be lying on the same circle.The viscous incompressible fluid flow is described by the Navier | Stokes equations and the mass conservation equation with certain initial and boundary conditions. A fractional steps method, which allows us to avoid non-physical oscillations of the pressure, provides the timestepping procedure. Using the finite element discretization and the Bubnov | Galerkin method allows us to carry out spatial discretization.For form functions calculation of finite element mesh with polygonal cells, \

  7. Strategizing in multiple ways

    DEFF Research Database (Denmark)

    Larsen, Mette Vinther; Madsen, Charlotte Øland; Rasmussen, Jørgen Gulddahl

    2013-01-01

    Strategy processes are kinds of wayfaring where different actors interpret a formally defined strat-egy differently. In the everyday practice of organizations strategizing takes place in multiple ways through narratives and sensible actions. This forms a meshwork of polyphonic ways to enact one a...... based on this development paper is whether one can understand these diver-gent strategic wayfaring processes as constructive for organizations....

  8. Media and Multiplicity

    DEFF Research Database (Denmark)

    Blaagaard, Bolette

    2010-01-01

    In the past few years continental Europe has experienced a resurgence of right-wing party politics, nationalism and xenophobia. In this nationalist revival the media and advanced communications technologies have played a significant role, as evidenced by the debates following cases...... explores the tensions within the relation between journalistic practice and the construction of the idea of the nation and the multiplicity of media and cultures which inhabit the spheres of journalism and nation....

  9. Animal Bites - Multiple Languages

    Science.gov (United States)

    ... V W XYZ List of All Topics All Animal Bites - Multiple Languages To use the sharing features on this page, ... Library of Medicine Vietnamese (Tiếng Việt) Expand Section Animal Bites and Scratches - Tiếng Việt (Vietnamese) ... Health Information Translations Characters not displaying correctly on this page? See language display issues . Return to the MedlinePlus Health Information ...

  10. Multiple plots in R

    DEFF Research Database (Denmark)

    Edwards, Stefan McKinnon

    2012-01-01

    In this chapter I will investigate how to combine multiple plots into a single. The scenario is a dataset of a series of measurements, on three samples in three situations. There are many ways we can display this, e.g. 3d graphs or faceting. 3d graphs are not good for displaying static data so we...... will not go there. Faceting is strictly speaking for plotting all variable / classes against each other....

  11. Multiple muons in MACRO

    Science.gov (United States)

    Heinz, R.

    1985-01-01

    An analysis of the multiple muon events in the Monopole Astrophysics and Cosmic Ray Observatory detector was conducted to determine the cosmic ray composition. Particular emphasis is placed on the interesting primary cosmic ray energy region above 2000 TeV/nucleus. An extensive study of muon production in cosmic ray showers has been done. Results were used to parameterize the characteristics of muon penetration into the Earth to the location of a detector.

  12. Multiple plots in R

    DEFF Research Database (Denmark)

    Edwards, Stefan McKinnon

    2012-01-01

    In this chapter I will investigate how to combine multiple plots into a single. The scenario is a dataset of a series of measurements, on three samples in three situations. There are many ways we can display this, e.g. 3d graphs or faceting. 3d graphs are not good for displaying static data so we...... will not go there. Faceting is strictly speaking for plotting all variable / classes against each other....

  13. Multiple myeloma: 45 cases

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Hee Chul; Suh, Jin Suck; Park, Chang Yun [Yonsei University College of Medicine, Seoul (Korea, Republic of)

    1990-10-15

    We evaluated 45 cases of multiple myelomas retrospectively confirmed in Severance Hospital from the period of 1983-1989. In order to assess the radiologic features of the multiple myeloma and to assist in possible early diagnosis and treatment. The result were as follows: 1. IgG(41%) was the most common immunoglobulin type secreted followed by light chain(36%). IgA(19%) and IgD(2%). Two percent of the patients had non-secretory type. 89% of patients were in their stage III of the disease. 2. Among the 45 patients, 96% had abnormal plain radiographic findings with average number of 4.5 lesions. Common sites were the spine, rib, skull, pelvis, and humerus in descending orders. The findings were localized or diffuse osteolytic bone destruction(85%). osteoporosis(49%), pathologic fracture and endosteal scalloping(55%). Osteoporosis was more prominent in stage III than stage II. 3. Both plain X-ray and radioisotope study was available for comparison in 28 patients. Concordance between the two studies were 44%, lesions detected only on plain X-ray film were 51%, and lesions detected only on the radioisotope were 5%. The plain radiography was able to detect only 54% of bone lesions confirmed by bone marrow biopsy. With the above results, accurate evaluation of bone lesions in multiple myeloma may be difficult with radiologic studies only. But familiarity with these radiologic findings of the this disease entity is necessary for early suspicion of the disease, thus for early diagnosis and treatment.

  14. Multiple part feeding

    DEFF Research Database (Denmark)

    Hvilshøj, Mads; Bøgh, Simon; Nielsen, Oluf Skov

    2012-01-01

    Purpose - The purpose of this paper is to present experience from a real-world demonstration of autonomous industrial mobile manipulation (AIMM) based on the mobile manipulator "Little Helper" performing multiple part feeding at the pump manufacturer Grundfos A/S. Design/methodology/approach - Th......Purpose - The purpose of this paper is to present experience from a real-world demonstration of autonomous industrial mobile manipulation (AIMM) based on the mobile manipulator "Little Helper" performing multiple part feeding at the pump manufacturer Grundfos A/S. Design....../methodology/approach - The necessary AIMM technologies exist at a mature level - the reason that no mobile manipulators have yet been implemented in industrial environments, is that research in the right applications have not been carried out. We propose a pragmatic approach consisting of: a commercial-off-the-shelf (COTS) mobile...... manipulator system design ("Little Helper"), a suitable and comprehensive industrial application (multiple part feeding), and a general implementation concept for industrial environments (the "Bartender Concept"). Findings - Results from the three days of real-world demonstration show that "Little Helper...

  15. Multiples waveform inversion

    KAUST Repository

    Zhang, D. L.

    2013-01-01

    To increase the illumination of the subsurface and to eliminate the dependency of FWI on the source wavelet, we propose multiples waveform inversion (MWI) that transforms each hydrophone into a virtual point source with a time history equal to that of the recorded data. These virtual sources are used to numerically generate downgoing wavefields that are correlated with the backprojected surface-related multiples to give the migration image. Since the recorded data are treated as the virtual sources, knowledge of the source wavelet is not required, and the subsurface illumination is greatly enhanced because the entire free surface acts as an extended source compared to the radiation pattern of a traditional point source. Numerical tests on the Marmousi2 model show that the convergence rate and the spatial resolution of MWI is, respectively, faster and more accurate then FWI. The potential pitfall with this method is that the multiples undergo more than one roundtrip to the surface, which increases attenuation and reduces spatial resolution. This can lead to less resolved tomograms compared to conventional FWI. The possible solution is to combine both FWI and MWI in inverting for the subsurface velocity distribution.

  16. MULTIPLE OSCILLATION STABILIZING CONTROL.

    Energy Technology Data Exchange (ETDEWEB)

    YUE,M.; SCHLUETER,R.; AZARM,M.; BARI,R.

    2004-07-23

    This paper presents a strategy that may be used to guide stabilizing control design for multiple oscillations, which are difficult to control using conventional control design procedures. A multiple oscillation phenomena is observed in an example power system. A local bifurcation and an interarea bifurcation develop in an example power system due to multiple bifurcation parameter variations. The dynamic behaviors of the bifurcating system are complex due to the overlapping of the two different bifurcation subsystems and are shown to be difficult to control. The double bifurcations are studied in this paper and in order to stabilize them, three kind of {mu}-synthesis robust controls are designed, (a) {mu}-synthesis power system stabilizer (MPSS); (b) {mu}-synthesis SVC control (MSVC); and (c) a mixed MPSS/MSVC control. Based on the bifurcation subsystem analysis, the measurement signals and locations of the controls are selected. The control performances of three kind of controls are evaluated and compared. The conclusions are given according to the analysis and time simulation results.

  17. Multiple organ procurement

    Directory of Open Access Journals (Sweden)

    Vuković Milivoje

    2007-01-01

    Full Text Available Introduction. Liver transplantation is the most demanding of all solid organ transplantations. It requires perfect organization and motivation of health care professionals, patients and their families. This article deals with the procedure for multiple organ procurement, reviews criteria for organ donation and describes the surgical technique for multiple organ procurement. Discussion. Adequate selection and evaluation of cadaveric donors and of organs for transplantation should include early identification of potential donors, and early diagnosis of brain death. The procurement of the highest number of viable organs for transplantation requires excellence in each of the phases. Early and aggressive physiologic support in the maintenance of potential donors can reduce organ donor loss due to irreversible asystole or multiorgan failure (it is almost always possible to maintain organ perfusion pressure and increase the number of organs without increasing post-transplant morbidity or mortality. The ideal donor is a young, previously healthy, brain dead, victim of an accident. Conclusion. The surgical procedure for multiple organ procurement from brain death donors must be performed without intraopertive organ damage. .

  18. Multiplicity of massive stars

    CERN Document Server

    Preibisch, T; Zinnecker, H; Preibisch, Thomas; Weigelt, Gerd; Zinnecker, Hans

    2000-01-01

    We discuss the observed multiplicity of massive stars and implications on theories of massive star formation. After a short summary of the literature on massive star multiplicity, we focus on the O- and B-type stars in the Orion Nebula Cluster, which constitute a homogenous sample of very young massive stars. 13 of these stars have recently been the targets of a bispectrum speckle interferometry survey for companions. Considering the visual and also the known spectroscopic companions of these stars, the total number of companions is at least 14. Extrapolation with correction for the unresolved systems suggests that there are at least 1.5 and perhaps as much as 4 companions per primary star on average. This number is clearly higher than the mean number of about 0.5 companions per primary star found for the low-mass stars in the general field population and also in the Orion Nebula cluster. This suggests that a different mechanism is at work in the formation of high-mass multiple systems in the dense Orion Nebu...

  19. Transcription factor CTCF and mammalian genome organization

    Directory of Open Access Journals (Sweden)

    Kotova E. S.

    2014-07-01

    Full Text Available The CTCF transcription factor is thought to be one of the main participants in various gene regulatory networks including transcription activation and repression, formation of independently functioning chromatin domains, regulation of imprinting etc. Sequencing of human and other genomes opened up a possibility to ascertain the genomic distribution of CTCF binding sites and to identify CTCF-dependent cis-regulatory elements, including insulators. In the review, we summarized recent data on CTCF functioning within a framework of the chromatin loop domain hypothesis of large-scale regulation of the genome activity. Its fundamental properties allow CTCF to serve as a transcription factor, an insulator protein and a dispersed genome-wide demarcation tool able to recruit various factors that emerge in response to diverse external and internal signals, and thus to exert its signal-specific function(s.

  20. The Chromatin Remodelling Enzymes SNF2H and SNF2L Position Nucleosomes adjacent to CTCF and Other Transcription Factors.

    Directory of Open Access Journals (Sweden)

    Nicola Wiechens

    2016-03-01

    Full Text Available Within the genomes of metazoans, nucleosomes are highly organised adjacent to the binding sites for a subset of transcription factors. Here we have sought to investigate which chromatin remodelling enzymes are responsible for this. We find that the ATP-dependent chromatin remodelling enzyme SNF2H plays a major role organising arrays of nucleosomes adjacent to the binding sites for the architectural transcription factor CTCF sites and acts to promote CTCF binding. At many other factor binding sites SNF2H and the related enzyme SNF2L contribute to nucleosome organisation. The action of SNF2H at CTCF sites is functionally important as depletion of CTCF or SNF2H affects transcription of a common group of genes. This suggests that chromatin remodelling ATPase's most closely related to the Drosophila ISWI protein contribute to the function of many human gene regulatory elements.

  1. The Chromatin Remodelling Enzymes SNF2H and SNF2L Position Nucleosomes adjacent to CTCF and Other Transcription Factors.

    Science.gov (United States)

    Wiechens, Nicola; Singh, Vijender; Gkikopoulos, Triantaffyllos; Schofield, Pieta; Rocha, Sonia; Owen-Hughes, Tom

    2016-03-01

    Within the genomes of metazoans, nucleosomes are highly organised adjacent to the binding sites for a subset of transcription factors. Here we have sought to investigate which chromatin remodelling enzymes are responsible for this. We find that the ATP-dependent chromatin remodelling enzyme SNF2H plays a major role organising arrays of nucleosomes adjacent to the binding sites for the architectural transcription factor CTCF sites and acts to promote CTCF binding. At many other factor binding sites SNF2H and the related enzyme SNF2L contribute to nucleosome organisation. The action of SNF2H at CTCF sites is functionally important as depletion of CTCF or SNF2H affects transcription of a common group of genes. This suggests that chromatin remodelling ATPase's most closely related to the Drosophila ISWI protein contribute to the function of many human gene regulatory elements.

  2. Superheavy-element spectroscopy: Correlations along element 115 decay chains

    Directory of Open Access Journals (Sweden)

    Rudolph D.

    2016-01-01

    Full Text Available Following a brief summary of the region of the heaviest atomic nuclei yet created in the laboratory, data on more than hundred α-decay chains associated with the production of element 115 are combined to investigate time and energy correlations along the observed decay chains. Several of these are analysed using a new method for statistical assessments of lifetimes in sets of decay chains.

  3. An improved optimal elemental method for updating finite element models

    Institute of Scientific and Technical Information of China (English)

    Duan Zhongdong(段忠东); Spencer B.F.; Yan Guirong(闫桂荣); Ou Jinping(欧进萍)

    2004-01-01

    The optimal matrix method and optimal elemental method used to update finite element models may not provide accurate results. This situation occurs when the test modal model is incomplete, as is often the case in practice. An improved optimal elemental method is presented that defines a new objective function, and as a byproduct, circumvents the need for mass normalized modal shapes, which are also not readily available in practice. To solve the group of nonlinear equations created by the improved optimal method, the Lagrange multiplier method and Matlab function fmincon are employed. To deal with actual complex structures,the float-encoding genetic algorithm (FGA) is introduced to enhance the capability of the improved method. Two examples, a 7-degree of freedom (DOF) mass-spring system and a 53-DOF planar frame, respectively, are updated using the improved method.Thc example results demonstrate the advantages of the improved method over existing optimal methods, and show that the genetic algorithm is an effective way to update the models used for actual complex structures.

  4. Design of a shielded coil element of a matrix gradient coil

    Science.gov (United States)

    Jia, Feng; Littin, Sebastian; Layton, Kelvin J.; Kroboth, Stefan; Yu, Huijun; Zaitsev, Maxim

    2017-08-01

    The increasing interest in spatial encoding with non-linear magnetic fields has intensified the need for coils that generates such fields. Matrix coils consisting of multiple coil elements appear to offer a high flexibility in generating customized encoding fields and are particularly promising for localized high resolution imaging applications. However, coil elements of existing matrix coils were primarily designed and constructed for better shimming and therefore are not expected to achieve an optimal performance for local spatial encoding. Moreover, eddy current properties of such coil elements were not fully explored. In this work, an optimization problem is formulated based on the requirement of local non-linear encoding and eddy current reduction that results in novel designs of coil elements for an actively-shielded matrix gradient coil. Two metrics are proposed to assess the performance of different coil element designs. The results are analyzed to reveal new insights into coil element design.

  5. Information capacity of genetic regulatory elements

    Science.gov (United States)

    Tkačik, Gašper; Callan, Curtis G., Jr.; Bialek, William

    2008-07-01

    Changes in a cell’s external or internal conditions are usually reflected in the concentrations of the relevant transcription factors. These proteins in turn modulate the expression levels of the genes under their control and sometimes need to perform nontrivial computations that integrate several inputs and affect multiple genes. At the same time, the activities of the regulated genes would fluctuate even if the inputs were held fixed, as a consequence of the intrinsic noise in the system, and such noise must fundamentally limit the reliability of any genetic computation. Here we use information theory to formalize the notion of information transmission in simple genetic regulatory elements in the presence of physically realistic noise sources. The dependence of this “channel capacity” on noise parameters, cooperativity and cost of making signaling molecules is explored systematically. We find that, in the range of parameters probed by recent in vivo measurements, capacities higher than one bit should be achievable. It is of course generally accepted that gene regulatory elements must, in order to function properly, have a capacity of at least one bit. The central point of our analysis is the demonstration that simple physical models of noisy gene transcription, with realistic parameters, can indeed achieve this capacity: it was not self-evident that this should be so. We also demonstrate that capacities significantly greater than one bit are possible, so that transcriptional regulation need not be limited to simple “on-off” components. The question whether real systems actually exploit this richer possibility is beyond the scope of this investigation.

  6. Common Data Elements for Clinical Research in Friedreich Ataxia

    Science.gov (United States)

    Lynch, David R.; Pandolfo, Massimo; Schulz, Jorg B.; Perlman, Susan; Delatycki, Martin B.; Payne, R. Mark; Shaddy, Robert; Fischbeck, Kenneth H.; Farmer, Jennifer; Kantor, Paul; Raman, Subha V.; Hunegs, Lisa; Odenkirchen, Joanne; Miller, Kristy; Kaufmann, Petra

    2012-01-01

    Background To reduce study start-up time, increase data sharing, and assist investigators conducting clinical studies, the National Institute of Neurological Disorders and Stroke embarked on an initiative to create common data elements for neuroscience clinical research. The Common Data Element Team developed general common data elements which are commonly collected in clinical studies regardless of therapeutic area, such as demographics. In the present project, we applied such approaches to data collection in Friedreich ataxia, a neurological disorder that involves multiple organ systems. Methods To develop Friedreich’s ataxia common data elements, Friedreich’s ataxia experts formed a working group and subgroups to define elements in: Ataxia and Performance Measures; Biomarkers; Cardiac and Other Clinical Outcomes; and Demographics, Laboratory Tests and Medical History. The basic development process included: Identification of international experts in Friedreich’s ataxia clinical research; Meeting via teleconference to develop a draft of standardized common data elements recommendations; Vetting of recommendations across the subgroups; Dissemination of recommendations to the research community for public comment. Results The full recommendations were published online in September 2011 at http://www.commondataelements.ninds.nih.gov/FA.aspx. The Subgroups’ recommendations are classified as core, supplemental or exploratory. Template case report forms were created for many of the core tests. Conclusions The present set of data elements should ideally lead to decreased initiation time for clinical research studies and greater ability to compare and analyze data across studies. Their incorporation into new and ongoing studies will be assessed in an ongoing fashion to define their utility in Friedreich’s ataxia. PMID:23239403

  7. Reliability-Based Optimization of Structural Elements

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    In this paper structural elements from an optimization point of view are considered, i.e. only the geometry of a structural element is optimized. Reliability modelling of the structural element is discussed both from an element point of view and from a system point of view. The optimization...

  8. Low cost, lightweight fuel cell elements

    Science.gov (United States)

    Kindler, Andrew (Inventor)

    2001-01-01

    New fuel cell elements for use in liquid feed fuel cells are provided. The elements including biplates and endplates are low in cost, light in weight, and allow high efficiency operation. Electrically conductive elements are also a part of the fuel cell elements.

  9. The Transuranium Elements - Present Status: Nobel Lecture

    Science.gov (United States)

    Seaborg, G. T.

    1951-12-12

    The discovery of the transuranium elements and the work done on them up to the present time are reviewed. The properties of these elements, their relationship to other elements, their place in the periodic table, and the possibility of production and identification of other transuranium elements are discussed briefly.

  10. Transcriptome analysis of recurrently deregulated genes across multiple cancers identifies new pan-cancer biomarkers

    DEFF Research Database (Denmark)

    Kaczkowski, Bogumil; Tanaka, Yuji; Kawaji, Hideya;

    2016-01-01

    RNAs which are upregulated in cancer, defining promoters which overlap with repetitive elements (especially SINE/Alu and LTR/ERV1 elements) that are often upregulated in cancer. Lastly, we documented for the first time upregulation of multiple copies of the REP522 interspersed repeat in cancer. Overall...

  11. Environmental factors in multiple sclerosis.

    Science.gov (United States)

    Pantazou, Vasiliki; Schluep, Myriam; Du Pasquier, Renaud

    2015-04-01

    Although multiple sclerosis (MS) is recognized as a disorder involving the immune system, the interplay of environmental factors and individual genetic susceptibility seems to influence MS onset and clinical expression, as well as therapeutic responsiveness. Multiple human epidemiological and animal model studies have evaluated the effect of different environmental factors, such as viral infections, vitamin intake, sun exposure, or still dietary and life habits on MS prevalence. Previous Epstein-Barr virus infection, especially if this infection occurs in late childhood, and lack of vitamin D (VitD) currently appear to be the most robust environmental factors for the risk of MS, at least from an epidemiological standpoint. Ultraviolet radiation (UVR) activates VitD production but there are also some elements supporting the fact that insufficient UVR exposure during childhood may represent a VitD-independent risk factor of MS development, as well as negative effect on the clinical and radiological course of MS. Recently, there has been a growing interest in the gut-brain axis, a bidirectional neuro-hormonal communication system between the intestinal microbiota and the central nervous system (CNS). Indeed, components of the intestinal microbiota may be pro-inflammatory, promote the migration of immune cells into the CNS, and thus be a key parameter for the development of autoimmune disorders such as MS. Interestingly most environmental factors seem to play a role during childhood. Thus, if childhood is the most fragile period to develop MS later in life, preventive measures should be applied early in life. For example, adopting a diet enriched in VitD, playing outdoor and avoiding passive smoking would be extremely simple measures of primary prevention for public health strategies. However, these hypotheses need to be confirmed by prospective evaluations, which are obviously difficult to conduct. In addition, it remains to be determined whether and how Vit

  12. Submicron hard X-ray fluorescence imaging of synthetic elements

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Mark P., E-mail: mjensen@anl.gov [Chemical Sciences and Engineering Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Aryal, Baikuntha P. [Chemical Sciences and Engineering Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Department of Chemistry, University of Chicago, Chicago, IL 60637 (United States); Gorman-Lewis, Drew [Chemical Sciences and Engineering Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Paunesku, Tatjana [Department of Radiation Oncology, Feinberg School of Medicine, Northwestern University, Chicago, IL 60611 (United States); Department of Radiology, Feinberg School of Medicine, Northwestern University, Chicago, IL 60611 (United States); Lai, Barry; Vogt, Stefan [X-ray Science Division, Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 (United States); Woloschak, Gayle E. [Department of Radiation Oncology, Feinberg School of Medicine, Northwestern University, Chicago, IL 60611 (United States); Department of Radiology, Feinberg School of Medicine, Northwestern University, Chicago, IL 60611 (United States)

    2012-04-13

    Highlights: Black-Right-Pointing-Pointer Actinide elements are mapped with L-edge X-rays and better than 400 nm resolution. Black-Right-Pointing-Pointer A typical detection limit was 2.9 Multiplication-Sign 10{sup -20} moles Pu {mu}m{sup -2}. Black-Right-Pointing-Pointer XANES measurements provide chemical information in 0.1 {mu}m{sup 2} spots. Black-Right-Pointing-Pointer Selection of materials for encapsulation is important for avoiding interferences. - Abstract: Synchrotron-based X-ray fluorescence microscopy (XFM) using hard X-rays focused into sub-micron spots is a powerful technique for elemental quantification and mapping, as well as microspectroscopic measurements such as {mu}-XANES (X-ray absorption near edge structure). We have used XFM to image and simultaneously quantify the transuranic element plutonium at the L{sub 3} or L{sub 2}-edge as well as Th and lighter biologically essential elements in individual rat pheochromocytoma (PC12) cells after exposure to the long-lived plutonium isotope {sup 242}Pu. Elemental maps demonstrate that plutonium localizes principally in the cytoplasm of the cells and avoids the cell nucleus, which is marked by the highest concentrations of phosphorus and zinc, under the conditions of our experiments. The minimum detection limit under typical acquisition conditions with an incident X-ray energy of 18 keV for an average 202 {mu}m{sup 2} cell is 1.4 fg Pu or 2.9 Multiplication-Sign 10{sup -20} moles Pu {mu}m{sup -2}, which is similar to the detection limit of K-edge XFM of transition metals at 10 keV. Copper electron microscopy grids were used to avoid interference from gold X-ray emissions, but traces of strontium present in naturally occurring calcium can still interfere with plutonium detection using its L{sub {alpha}} X-ray emission.

  13. Multiple exposure to metals in eight types of welding.

    Science.gov (United States)

    Apostoli, P; Porru, S; Brunelli, E; Alessio, L

    1997-01-01

    This article evaluates multiple exposures to metals in different types of metal welding such as manual metal arc for mild and stainless steel, continuous wire, submerged arc, laser and brazing. Environmental monitoring was carried out in eight different occupational situations and the inductively coupled plasma mass spectrometry technique was adopted in order to characterize exposure to several elements simultaneously and with high accuracy. The results showed that up to 23 elements could be measured. The highest concentrations were found for Al, Mn, Fr, Ni, Cr, Cu and Zn. For some elements such as In, Nd, I, Rb the concentrations were very low. A qualitative and quantitative variation in fume composition was observed at a certain distance from the welding point, which should be to taken into account when evaluating indirect exposures. It would also be possible, with this technique, to identify specific elements in the mixture which could also be measured in biological fluids.

  14. Representation Elements of Spatial Thinking

    Science.gov (United States)

    Fiantika, F. R.

    2017-04-01

    This paper aims to add a reference in revealing spatial thinking. There several definitions of spatial thinking but it is not easy to defining it. We can start to discuss the concept, its basic a forming representation. Initially, the five sense catch the natural phenomenon and forward it to memory for processing. Abstraction plays a role in processing information into a concept. There are two types of representation, namely internal representation and external representation. The internal representation is also known as mental representation; this representation is in the human mind. The external representation may include images, auditory and kinesthetic which can be used to describe, explain and communicate the structure, operation, the function of the object as well as relationships. There are two main elements, representations properties and object relationships. These elements play a role in forming a representation.

  15. DOLFIN: Automated Finite Element Computing

    CERN Document Server

    Logg, Anders; 10.1145/1731022.1731030

    2011-01-01

    We describe here a library aimed at automating the solution of partial differential equations using the finite element method. By employing novel techniques for automated code generation, the library combines a high level of expressiveness with efficient computation. Finite element variational forms may be expressed in near mathematical notation, from which low-level code is automatically generated, compiled and seamlessly integrated with efficient implementations of computational meshes and high-performance linear algebra. Easy-to-use object-oriented interfaces to the library are provided in the form of a C++ library and a Python module. This paper discusses the mathematical abstractions and methods used in the design of the library and its implementation. A number of examples are presented to demonstrate the use of the library in application code.

  16. Finite elements methods in mechanics

    CERN Document Server

    Eslami, M Reza

    2014-01-01

    This book covers all basic areas of mechanical engineering, such as fluid mechanics, heat conduction, beams, and elasticity with detailed derivations for the mass, stiffness, and force matrices. It is especially designed to give physical feeling to the reader for finite element approximation by the introduction of finite elements to the elevation of elastic membrane. A detailed treatment of computer methods with numerical examples are provided. In the fluid mechanics chapter, the conventional and vorticity transport formulations for viscous incompressible fluid flow with discussion on the method of solution are presented. The variational and Galerkin formulations of the heat conduction, beams, and elasticity problems are also discussed in detail. Three computer codes are provided to solve the elastic membrane problem. One of them solves the Poisson’s equation. The second computer program handles the two dimensional elasticity problems, and the third one presents the three dimensional transient heat conducti...

  17. Automation of finite element methods

    CERN Document Server

    Korelc, Jože

    2016-01-01

    New finite elements are needed as well in research as in industry environments for the development of virtual prediction techniques. The design and implementation of novel finite elements for specific purposes is a tedious and time consuming task, especially for nonlinear formulations. The automation of this process can help to speed up this process considerably since the generation of the final computer code can be accelerated by order of several magnitudes. This book provides the reader with the required knowledge needed to employ modern automatic tools like AceGen within solid mechanics in a successful way. It covers the range from the theoretical background, algorithmic treatments to many different applications. The book is written for advanced students in the engineering field and for researchers in educational and industrial environments.

  18. Surface energies of elemental crystals

    Science.gov (United States)

    Tran, Richard; Xu, Zihan; Radhakrishnan, Balachandran; Winston, Donald; Sun, Wenhao; Persson, Kristin A.; Ong, Shyue Ping

    2016-09-01

    The surface energy is a fundamental property of the different facets of a crystal that is crucial to the understanding of various phenomena like surface segregation, roughening, catalytic activity, and the crystal’s equilibrium shape. Such surface phenomena are especially important at the nanoscale, where the large surface area to volume ratios lead to properties that are significantly different from the bulk. In this work, we present the largest database of calculated surface energies for elemental crystals to date. This database contains the surface energies of more than 100 polymorphs of about 70 elements, up to a maximum Miller index of two and three for non-cubic and cubic crystals, respectively. Well-known reconstruction schemes are also accounted for. The database is systematically improvable and has been rigorously validated against previous experimental and computational data where available. We will describe the methodology used in constructing the database, and how it can be accessed for further studies and design of materials.

  19. Selective Smoothed Finite Element Method

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The paper examines three selective schemes for the smoothed finite element method (SFEM) which was formulated by incorporating a cell-wise strain smoothing operation into the standard compatible finite element method (FEM). These selective SFEM schemes were formulated based on three selective integration FEM schemes with similar properties found between the number of smoothing cells in the SFEM and the number of Gaussian integration points in the FEM. Both scheme 1 and scheme 2 are free of nearly incompressible locking, but scheme 2 is more general and gives better results than scheme 1. In addition, scheme 2 can be applied to anisotropic and nonlinear situations, while scheme 1 can only be applied to isotropic and linear situations. Scheme 3 is free of shear locking. This scheme can be applied to plate and shell problems. Results of the numerical study show that the selective SFEM schemes give more accurate results than the FEM schemes.

  20. Composite oxygen ion transport element

    Science.gov (United States)

    Chen, Jack C.; Besecker, Charles J.; Chen, Hancun; Robinson, Earil T.

    2007-06-12

    A composite oxygen ion transport element that has a layered structure formed by a dense layer to transport oxygen ions and electrons and a porous support layer to provide mechanical support. The dense layer can be formed of a mixture of a mixed conductor, an ionic conductor, and a metal. The porous support layer can be fabricated from an oxide dispersion strengthened metal, a metal-reinforced intermetallic alloy, a boron-doped Mo.sub.5Si.sub.3-based intermetallic alloy or combinations thereof. The support layer can be provided with a network of non-interconnected pores and each of said pores communicates between opposite surfaces of said support layer. Such a support layer can be advantageously employed to reduce diffusion resistance in any type of element, including those using a different material makeup than that outlined above.

  1. ADAPTIVE ELLIPSOIDAL ACOUSTIC INFINITE ELEMENT

    Institute of Scientific and Technical Information of China (English)

    Yang Ruiliang; Wang Hongzhen

    2004-01-01

    It is shown that the basis of the ellipsoidal acoustic infinite element Burnett method,the multipole expansion,cannot represent real ellipsoidal acoustic field exactly.To solve the problem,a weight of angular direction is added to the multipole expansion.The comparison of the modified method and the prime method shows that the modified method can describe and solve the ellipsoidal acoustic field more accurately than ever.A dilating sphere is used to test the new method further.Unlike other infinite element methods,varied ratio of the ellipsoidal artificial boundary instead of sphere is used.The pressure value of the artificial boundary is utilized as the initial value of the new method.Then the radiating phenomena of the ellipsoidal acoustic field can be researched using the new method.These examples show the feasibility of the adaptive method.

  2. Biogeochemistry of Hot Spring Biofilms: Major and Trace Element Behavior

    Science.gov (United States)

    Havig, J. R.; Prapaipong, P.; Zolotova, N.; Moore, G.; Shock, E. L.

    2008-12-01

    (Li, N, Si, P, K, Fe, Mn, Zn, Ga, Rb, Y, Cd, Sn, Ba, Hf, Ta, and Pb), and elements that varied across all hot spring systems (V, Sr). These results permit multiple hypotheses concerning active microbial uptake or exclusion of individual elements, expedited mineral/glass dissolution, and temperature and fluid composition effects on abiotic ion exchange processes in complex biofilm matrices.

  3. LOG PERIODIC DIPOLE ARRAY WITH PARASITIC ELEMENTS

    Science.gov (United States)

    The design and measured characteristics of dipole and monopole versions of a log periodic array with parasitic elements are discussed. In a dipole...array with parasitic elements, these elements are used in place of every alternate dipole, thereby eliminating the need of a twisted feed arrangement...for the elements to obtain log periodic performance of the anntenna. This design with parasitic elements lends itself to a monopole version of the

  4. CONSTRAINED QUADRILATERAL NONCONFORMING ROTATED Q1 ELEMENT

    Institute of Scientific and Technical Information of China (English)

    Jun Hu; Zhong-ci Shi

    2005-01-01

    In this paper, we define a new nonconforming quadrilateral finite element based on the nonconforming rotated Q1 element by enforcing a constraint on each element, which has only three degrees of freedom. We investigate the consistency, approximation, superclose property, discrete Green's function and superconvergence of this element. Moreover, we propose a new postprocessing technique and apply it to this element. It is proved that the postprocessed discrete solution is superconvergent under a mild assumption on the mesh.

  5. Elements of Bayesian experimental design

    Energy Technology Data Exchange (ETDEWEB)

    Sivia, D.S. [Rutherford Appleton Lab., Oxon (United Kingdom)

    1997-09-01

    We consider some elements of the Bayesian approach that are important for optimal experimental design. While the underlying principles used are very general, and are explained in detail in a recent tutorial text, they are applied here to the specific case of characterising the inferential value of different resolution peakshapes. This particular issue was considered earlier by Silver, Sivia and Pynn (1989, 1990a, 1990b), and the following presentation confirms and extends the conclusions of their analysis.

  6. Moessbauer spectroscopy with actinide elements

    Energy Technology Data Exchange (ETDEWEB)

    Potzel, W.; Moser, J.; Asch, L.; Kalvius, G.M. (Technische Univ. Muenchen, Garching (Germany, F.R.)

    1983-01-01

    Although formally equivalent to the lanthanide (4f) elements, the light actinides show a much more varied behaviour due to the larger spatial extent and ionizability of the 5f electrons. The application of Moessbauer spectroscopy for the determination of electronic properties of the actinides is outlined. Emphasis is put on high pressure Moessbauer experiments using the 60 keV transition in /sup 237/Np to study questions of delocalization of 5f electrons.

  7. Origin of the Chemical Elements

    CERN Document Server

    Rauscher, T

    2010-01-01

    This review provides the necessary background from astrophysics, nuclear, and particle physics to understand the cosmic origin of the chemical elements. It reflects the year 2009 state of the art in this extremely quickly developing interdisciplinary research direction. The discussion summarizes the nucleosynthetic processes in the course of the evolution of the Universe and the galaxies contained within, including primordial nucleosynthesis, stellar evolution, and explosive nucleosynthesis in single and binary systems.

  8. Blade-element/momentum theory

    DEFF Research Database (Denmark)

    Sørensen, Jens Nørkær

    2016-01-01

    Although there exists a large variety of methods for predicting performance and loadings of wind turbines, the only approach used today by wind turbine manufacturers is based on the blade-element/momentum (BEM) theory by Glauert (Aerodynamic theory. Springer, Berlin, pp. 169-360, 1935). A basic...... assumption in the BEM theory is that the flow takes place in independent stream tubes and that the loading is determined from two-dimensional sectional airfoil characteristics....

  9. Conrad's Skeptical Elements in Nostromo

    Institute of Scientific and Technical Information of China (English)

    何旭

    2016-01-01

    The Paper analyze the skeptical elements in Nostromo through mostly the analysis of the values held by different char-acter and their respective destiny. Conrad expresses his skepticism towards material interest through the character of Charles Gould, who firmly believes that material interests alone can bring order and peace to the country. But his success is temporary. Eventually success of his silver mine not only intensifies political conflicts but also brings him disillusionment and loneliness.

  10. Multiple constant multiplication optimizations for field programmable gate arrays

    CERN Document Server

    Kumm, Martin

    2016-01-01

    This work covers field programmable gate array (FPGA)-specific optimizations of circuits computing the multiplication of a variable by several constants, commonly denoted as multiple constant multiplication (MCM). These optimizations focus on low resource usage but high performance. They comprise the use of fast carry-chains in adder-based constant multiplications including ternary (3-input) adders as well as the integration of look-up table-based constant multipliers and embedded multipliers to get the optimal mapping to modern FPGAs. The proposed methods can be used for the efficient implementation of digital filters, discrete transforms and many other circuits in the domain of digital signal processing, communication and image processing. Contents Heuristic and ILP-Based Optimal Solutions for the Pipelined Multiple Constant Multiplication Problem Methods to Integrate Embedded Multipliers, LUT-Based Constant Multipliers and Ternary (3-Input) Adders An Optimized Multiple Constant Multiplication Architecture ...

  11. Ordering, materiality and multiplicity

    DEFF Research Database (Denmark)

    van der Duim, René; Ren, Carina Bregnholm; Jóhannesson, Gunnar Thór

    2013-01-01

    In this article we discuss how ANT has been translated into tourism research and show how it has impacted the field by presenting three concepts integral to the ANT approach: ordering, materiality and multiplicity. We first introduce ANT and draw attention to current ANT studies in tourism......, followed by a discussion of how newer approaches within post-ANT urge us to face the ontological politics, which we engage in when performing tourism research. In conclusion we argue that ANT enables a radical new way at looking at tourism, tourism destinations and objects and investigations...... into the ontological condition of tourism....

  12. Anthropology and Multiple Modernities

    DEFF Research Database (Denmark)

    Thomassen, Bjørn

    , as the concept was pluralized into a variety of forms: multiple modernities, parallel modernities, manifold modernities, alternative modernities, competing modernities, reflexive modernities, early modernities, other modernities – the list still unfolding. By reviewing various attempts to conceptualise...... configurations. However, if the current pluralizing of modernity ultimately serves to describe the variety of cultural forms that co-exist in the World today, the analytical value of the concept risks being watered down, and little is gained in perspective. Arguably, other concepts would have served the purpose...

  13. Distributed multiple description coding

    CERN Document Server

    Bai, Huihui; Zhao, Yao

    2011-01-01

    This book examines distributed video coding (DVC) and multiple description coding (MDC), two novel techniques designed to address the problems of conventional image and video compression coding. Covering all fundamental concepts and core technologies, the chapters can also be read as independent and self-sufficient, describing each methodology in sufficient detail to enable readers to repeat the corresponding experiments easily. Topics and features: provides a broad overview of DVC and MDC, from the basic principles to the latest research; covers sub-sampling based MDC, quantization based MDC,

  14. Multiple Sclerosis: An Update.

    Science.gov (United States)

    Faguy, Kathryn

    2016-05-01

    Multiple sclerosis (MS) is the most common disabling neurologic condition in young adults and imposes high financial and quality of life costs on patients, their families, and society. Yet, developments in the battle against MS include new treatments to slow its progression and updated diagnostic criteria that can accelerate diagnosis and effective treatment. This article offers a review and update on the disease, focusing on risk factors and possible causes, symptoms, forms of MS, diagnostic criteria and tools, and the expanding array of approved treatments. It also reports on the skyrocketing cost of MS drugs, misdiagnosis, and special patient populations with MS.

  15. Multiple pulmonary rheumatoid nodules.

    Science.gov (United States)

    Sargin, Gokhan; Senturk, Taskin

    2015-01-01

    We present a case of 45-year-old female patient with the diagnosis of seropositive rheumatoid arthritis, who was admitted to our rheumatology department with exacerbation of the disease. The patient's disease activity score (DAS 28) was 6.9. Physical examination revealed changes in the lung auscultation as a rough breathing sound at the middle and lower lobe of the right lung. Chest X-ray revealed multiple nodular densities in both lungs. Lung biopsy was performed for the diagnosis and revealed necrotizing granulomas with central fibrinoid necrosis surrounded by epithelioid cells. Such a histopathological picture is typical for rheumatoid nodules. Finally the patient was treated with rituximab, with significant improvement.

  16. Relighting multiple color textures

    Institute of Scientific and Technical Information of China (English)

    DIAO Chang-yu; LU Dong-ming; LIU Gang

    2005-01-01

    With the development of digital library technology, library books made of paper can be digital released and read, and Endangered Cultural Heritages can be preserved. Traditional library's contents and functions can be greatly enhanced by digital technologies. For these new library objects, the primary key problem is precisely reconstructing their 3D models. When constructing complete 3D models, multiple color texture maps are often necessary. A commonly encountered problem uncounted during fusing of textures from multiple color images is color distortion. Each texture of a single 3D model may be obtained under possibly different lighting conditions and color response of the camera. To remove any visible seam and improve color consistency between the textures while avoiding color distortion, we propose a new efficient algorithm to relight all the texture images globally,spread residual light difference, and recolor each image by homogeneous transformation. A relative illumination model was adopted to obtain the relighting function. We choose lαβ color space with minimal correlation between channels for many natural scenes, for calculating the relighting result. Looking into two overlapped images A and B, we can pairwise relight B into A's luminosity condition in two steps. We first scale B's l channel by the lA/lB ratio of the overlapped region. We can assume A and B are in a same color plane now. Then a homogeneous transformation is applied to B's α and β channels which moves B into A's hue and saturation condition. For multiple overlapped color textures, a patch based weighted global relighting method was proposed to minimize the total color difference. The pairwise relighting method was used between each two overlapped images, and the difference in every overlapped region after relighting was weighted and summed up to construct an energy value. We used Nelder-Mead method to find a minimal energy value and the relighting parameters for every image. After

  17. Identification and molecular characterization of LTR and LINE retrotransposable elements in Fagus sylvatica L.

    Directory of Open Access Journals (Sweden)

    Emiliani G

    2009-06-01

    Full Text Available Retrotransposable elements are important and peculiar genetic components derived from ancient retrovirus insertion inside plants genome. Their ability to move and/or replicate inside the genome is an important evolutionary force, responsible for the increase of genome size and the regulation of gene expression. Retrotransposable elements are well characterized in model or crop species like Arabidopsis thaliana and Oryza sativa, but are poorly known in forest tree species. In this paper the molecular identification of retrotransposable elements in Fagus sylvatica L. is reported. Two retrotransposons, belonging to the two major classes of LTR and non-LTR elements, were characterized trough a SCAR (Sequence Characterized Amplified Region strategy. The analysis demonstrated the presence of multiple copies of retrotransposable elements inside the genome of beech, in accordance with the viral quasi-species theory of retrotransposon evolution. The cloning and sequencing of amplification products and a Cleaved Amplified Polymorphisms (CAPs approach on the identified retrotransposons, showed a high level of diversity among the multiple copies of both elements. The identification of retrotransposable elements in forest trees represents an important step toward the understanding of mechanisms of genome evolution. Furthermore, the high polymorphism of retrotransposable elements can represent a starting point for the development of new genetic variability markers.

  18. Quantum Interference of Multiple Beams Induced by Multiple Scattering

    DEFF Research Database (Denmark)

    Ott, Johan Raunkjær; Mortensen, N. Asger; Lodahl, Peter

    2011-01-01

    We report on quantum interference induced by the transmission of quantized light through a multiple-scattering medium. We show that entangled states can be created by multiple-scattering and that quantum interference survives disorder averaging.......We report on quantum interference induced by the transmission of quantized light through a multiple-scattering medium. We show that entangled states can be created by multiple-scattering and that quantum interference survives disorder averaging....

  19. Mechanistically Distinct Pathways of Divergent Regulatory DNA Creation Contribute to Evolution of Human-Specific Genomic Regulatory Networks Driving Phenotypic Divergence of Homo sapiens.

    Science.gov (United States)

    Glinsky, Gennadi V

    2016-09-19

    Thousands of candidate human-specific regulatory sequences (HSRS) have been identified, supporting the hypothesis that unique to human phenotypes result from human-specific alterations of genomic regulatory networks. Collectively, a compendium of multiple diverse families of HSRS that are functionally and structurally divergent from Great Apes could be defined as the backbone of human-specific genomic regulatory networks. Here, the conservation patterns analysis of 18,364 candidate HSRS was carried out requiring that 100% of bases must remap during the alignments of human, chimpanzee, and bonobo sequences. A total of 5,535 candidate HSRS were identified that are: (i) highly conserved in Great Apes; (ii) evolved by the exaptation of highly conserved ancestral DNA; (iii) defined by either the acceleration of mutation rates on the human lineage or the functional divergence from non-human primates. The exaptation of highly conserved ancestral DNA pathway seems mechanistically distinct from the evolution of regulatory DNA segments driven by the species-specific expansion of transposable elements. Genome-wide proximity placement analysis of HSRS revealed that a small fraction of topologically associating domains (TADs) contain more than half of HSRS from four distinct families. TADs that are enriched for HSRS and termed rapidly evolving in humans TADs (revTADs) comprise 0.8-10.3% of 3,127 TADs in the hESC genome. RevTADs manifest distinct correlation patterns between placements of human accelerated regions, human-specific transcription factor-binding sites, and recombination rates. There is a significant enrichment within revTAD boundaries of hESC-enhancers, primate-specific CTCF-binding sites, human-specific RNAPII-binding sites, hCONDELs, and H3K4me3 peaks with human-specific enrichment at TSS in prefrontal cortex neurons (P Homo sapiens is driven by the evolution of human-specific genomic regulatory networks via at least two mechanistically distinct pathways of

  20. Adobe Photoshop Elements 10 unleash the hidden performance of Elements

    CERN Document Server

    Galer, Mark

    2011-01-01

    Master the most powerful photo editing tools and techniques that Elements has to offer! Using step-by-step projects, Mark Galer will have you creating stunning images in no time at all. Whether you want to create impressive, seamless montages, optimize your photos for perfect print quality, or simply enhance your images for maximum impact, Maximum Performance will give you the skills and know-how you need to create professional quality results. Featured projects teach you how to work with multilayered 16 bit/channel files, as well as convert to black and white using Adobe Camera Raw, create

  1. Smoldering Multiple Myeloma

    Directory of Open Access Journals (Sweden)

    Minjie Gao

    2015-01-01

    Full Text Available Smoldering multiple myeloma (SMM is an asymptomatic precursor stage of multiple myeloma (MM characterized by clonal bone marrow plasma cells (BMPC ≥ 10% and/or M protein level ≥ 30 g/L in the absence of end organ damage. It represents an intermediate stage between monoclonal gammopathy of undetermined significance (MGUS and symptomatic MM. The risk of progression to symptomatic MM is not uniform, and several parameters have been reported to predict the risk of progression. These include the level of M protein and the percentage of BMPC, the proportion of immunophenotypically aberrant plasma cells, and the presence of immunoparesis, free light-chain (FLC ratio, peripheral blood plasma cells (PBPC, pattern of serum M protein evolution, abnormal magnetic resonance imaging (MRI, cytogenetic abnormalities, IgA isotype, and Bence Jones proteinuria. So far treatment is still not recommended for SMM, because several trials suggested that patients with SMM do not benefit from early treatment. However, the Mateos et al. trial showed a survival benefit after early treatment with lenalidomide plus dexamethasone in patients with high-risk SMM. This trial has prompted a reevaluation of early treatment in an asymptomatic patient population.

  2. Blepharoclonus in multiple sclerosis.

    Science.gov (United States)

    Jacome, D E

    2001-12-01

    Keane described 2 patients with gaze-evoked blepharoclonus (BLC), a form of reflex BLC, and multiple sclerosis (MS). A search for common areas of demyelination and focal axonal atrophy (T1 black holes) of the central nervous system (CNS) in 11 patients with MS exhibiting eyelid closure BLC was conducted employing magnetic resonance imaging (MRI). Finding lesions in common CNS locations on these patients can help to elucidate the pathogenesis of this restricted movement disorder. Eleven adult patients with relapsing-remitting, primary or secondary progressive MS were studied. MRI views were completed employing a 1.5-tesla scanner. Contrast Axial T1 imaging was obtained in 9 patients. TL blackholes were not identified. Ten patients had multiple, scattered periventricular (PV) areas of demyelination. Four patients exhibited brainstem lesions of diverse but inconsistent locations including midbrain, cerebellar peduncle, pons and medulla. In 2 of the patients the brainstem lesions were transient but BLC persisted after the lesions regressed. No common areas of CNS demyelination or focal axonal atrophy were identified on these patients with MS and BLC. The pathogenesis and clinical significance of BLC in MS remains to be elucidated.

  3. Multiple organ dysfunction syndrome.

    Science.gov (United States)

    Ramírez, Michelle

    2013-01-01

    Initially known as multiple system organ failure, the term multiple organ dysfunction syndrome (MODS) was first described in the 1960s in adults with bleeding, respiratory failure, and sepsis. It is defined as "the development of potentially reversible physiologic derangement involving two or more organ systems not involved in the disorder that resulted in ICU admission, and arising in the wake of a potentially life threatening physiologic insult."(3) There are many risk factors predisposing to MODS; however, the most common risk factors are shock due to any cause, sepsis, and tissue hypoperfusion. A dysregulated immune response, or immuneparalysis, in which the homeostasis between pro-inflammatory and anti-inflammatory reaction is lost is thought to be key in the development of MODS. The clinical course and evolution of MODS is dependent on a combination of acquired and genetic factors. There are several nonspecific therapies for the prevention and resolution of MODS, mostly care is supportive. Mortality from MODS in septic pediatric patients varies between 11% and 54%. © 2013 Published by Mosby, Inc.

  4. Tuberous Sclerosis: Multiple Presentations

    Directory of Open Access Journals (Sweden)

    M. Sanei Taheri

    2008-01-01

    Full Text Available Introduction: Tuberous sclerosis is an autosomal do-minant genetic disorder that involves multiple or-gans. The predominant lesions are the hamartomas. Classically tuberous sclerosis has been characterized by a classic clinical triad of facial angiofibromas in 90%,retardation in 50-80%,seizure 80-90% and all three in 30%."nThe disease occurs in 1:100,000 persons in all races with nearly equal distribution between the sexes. "nCase Presentation: We had six patients who admitted with different presentations of tuberous sclerosis with a past history of convulsion from childhood, skin le-sions and mental retardation, also with new onset headache and changed pattern of convulsion. In physical examination facial angiofibromas and sub-ungual fibromas apparently detected. Brain CT scan study with contrast showed multiple calcified nod-ules associated with tubers and ventriculomegaly, also an enhancing enlarged nodule at foramen of mo-nro, which was suggestive of subependymal giant cell astrocytoma (SGCA. In abdominal and pelvic CT scan and ultrasonography, massive bilateral angio-myolipomatosis diagnosed. Also Focal hypodense le-sions in liver which were hyperechoic in ultrasono-graphy were diagnosed. With MRI study tubers, white matter lesions and subependymal nodules asso-ciated with SGCA were detected better. After surgery SGCA was proved."nDiscussion: Our patients had different presentations and various findings of this spectrum discussed in this lecture.

  5. Discrete Element Modeling for Mobility and Excavation

    Science.gov (United States)

    Knuth, M. A.; Hopkins, M. A.

    2011-12-01

    The planning and completion of mobility and excavation efforts on the moon requires a thorough understanding of the planetary regolith. In this work, a discrete element method (DEM) model is created to replicate those activities in the laboratory and for planning mission activities in the future. The crux of this work is developing a particle bed that best replicates the regolith tool/wheel interaction seen in the laboratory. To do this, a DEM geotechnical triaxial strength cell was created allowing for comparison of laboratory JSC-1a triaxial tests to DEM simulated soils. This model relies on a triangular lattice membrane covered triaxial cell for determining the macroscopic properties of the modeled granular material as well as a fast and efficient contact detection algorithm for a variety of grain shapes. Multiple grain shapes with increasing complexity (ellipsoid, poly-ellipsoid and polyhedra) have been developed and tested. This comparison gives us a basis to begin scaling DEM grain size and shape to practical values for mobility and excavation modeling. Next steps include development of a DEM scoop for percussive excavation testing as well as continued analysis of rover wheel interactions using a wide assortment of grain shape and size distributions.

  6. Magnetic reconnection as an element of turbulence

    Directory of Open Access Journals (Sweden)

    S. Servidio

    2011-10-01

    Full Text Available In this work, recent advances on the study of reconnection in turbulence are reviewed. Using direct numerical simulations of decaying incompressible two-dimensional magnetohydrodynamics (MHD, it was found that in fully developed turbulence complex processes of reconnection locally occur (Servidio et al., 2009, 2010a. In this complex scenario, reconnection is spontaneous but locally driven by the fields, with the boundary conditions provided by the turbulence. Matching classical turbulence analysis with a generalized Sweet-Parker theory, the statistical features of these multiple-reconnection events have been identified. A discussion on the accuracy of our algorithms is provided, highlighting the necessity of adequate spatial resolution. Applications to the study of solar wind discontinuities are reviewed, comparing simulations to spacecraft observations. New results are shown, studying the time evolution of these local reconnection events. A preliminary study on the comparison between MHD and Hall MHD is reported. Our new approach to the study of reconnection as an element of turbulence has broad applications to space plasmas, shedding a new light on the study of magnetic reconnection in nature.

  7. Finite element analysis of elasto-plastic plate bending problems using transition rectangular plate elements

    Institute of Scientific and Technical Information of China (English)

    Bahattin Kanber; O.Yavuz Bozkurt

    2006-01-01

    In this work,the finite element analysis of the elasto-plastic plate bending problems is carried out using transition rectangular plate elements.The shape functions of the transition plate elements are derived based on a practical rule.The transition plate elements are all quadrilateral and can be used to obtain efficient finite element models using minimum number of elements.The mesh convergence rates of the models including the transition elements are compared with the regular element models.To verify the developed elements,simple tests are demonstrated and various elasto-plastic problems are solved.Their results are compared with ANSYS results.

  8. Implementing wavelet transform with SAW elements

    Institute of Scientific and Technical Information of China (English)

    LU; Wenke(卢文科); ZHU; Changchun(朱长纯); LIU; Junhua(刘君华); LIU; Qinghong(刘清洪)

    2003-01-01

    In the design of the finger-overlap envelope according to the envelope of wavelet function, it is concluded that the pulse-response function of the interdigital transducer (IDT) for surface acoustic wave (SAW) is identical to the wavelet function. SAW type of the wavelet-transform element is manufactured. A new method of using two wavelet-transform elements to manufacture the reconstruction element of the wavelet transform is proposed. The sources of the element error are analyzed, and the methods for reducing the error are put forward. SAW type of the wavelet transformation element and its reconstruction element have the following three characteristics: (i) the implementing methods of the wavelet transform element and its reconstruction element are simple, and free of complicated mathematical algorithms of the wavelet transform; (ii) because one of SAW element is fast, the response velocities of SAW type of the wavelet transform element and its reconstruction element are also fast; (iii) the costs of the wavelet transform element and its reconstruction element are low, so the elements may be manufactured in a large quantity.

  9. Second level semi-degenerate fields in W3 Toda theory: matrix element and differential equation

    CERN Document Server

    Belavin, Vladimir; Estienne, Benoit; Santachiara, Raoul

    2016-01-01

    In a recent study we considered W3 Toda 4-point functions that involve matrix elements of a primary field with the highest-weight in the adjoint representation of sl3. We generalize this result by considering a semi-degenerate primary field, which has one null vector at level two. We obtain a sixth-order Fuchsian differential equation for the conformal blocks. We discuss the presence of multiplicities, the matrix elements and the fusion rules.

  10. Aesthetic Design as an Element of Service Innovation in New Technology-based Firms

    OpenAIRE

    Candi, Marina

    2008-01-01

    The goals of this thesis are to examine new technology-based firms’ use of aesthetic design as an element of service innovation and to explore potential relationships between aesthetic design and performance in this same context. There is a scarcity of research on aesthetic design as an element of service innovation, particularly in new technology-based firms. Because of this scarcity, a hybrid research strategy is appropriate and the empirical basis for this research encompasses multiple cas...

  11. Análise de regressão múltipla das concentrações de PM10 em função de elementos meteorológicos para Porto Alegre, Estado do Rio Grande do Sul, em 2005 e 2006 = Multiple regression analysis of PM10 concentration concerning to meteorological elements for Porto Alegre, Rio Grande do Sul State, in 2005 and 2006

    Directory of Open Access Journals (Sweden)

    Angela Radünz Lazzari

    2011-01-01

    Full Text Available O ar é um meio eficiente de dispersão de poluentes atmosféricos e seucomportamento depende dos movimentos atmosféricos que ocorrem na troposfera. Em Porto Alegre, Estado do Rio Grande do Sul, há um grande tráfego diário e uma concentração de indústrias que podem ser responsáveis por emissões atmosféricas. Neste trabalho, estudou-se ocomportamento das concentrações diárias de material particulado (PM10 desta cidade, considerando a influência dos elementos meteorológicos. A análise dos dados foi realizada a partir de estatísticas descritivas, correlação linear e regressão múltipla. Os dados foram fornecidos pela Fundação Estadual de Proteção Ambiental Henrique Luiz Roessler - RS (FEPAM e pelo Instituto Nacional de Meteorologia (INMET. A partir das análises pôde-se verificar que: asconcentrações do PM10, medidos diariamente às 16h, não ultrapassaram os padrões nacionais de qualidade do ar; os elementos meteorológicos que influenciam nas concentrações do PM10 foram: a velocidade média diária do vento e a radiação média diária com relações negativas; astemperaturas médias diárias do ar e as direções, norte e noroeste, do vento, com relações positivas. As direções do vento que contribuem significativamente para diminuir as concentrações nos locais medidos são Leste e Sudeste.Air is an efficient means of atmospheric pollutants dispersal and its r behavior depends on the atmospheric movements that occur in the troposphere. In Porto Alegre, Rio Grande do Sul State, there is a large daily traffic and a concentration of industries that may be responsible for atmospheric emission. In the present work we studied the behavior of daily concentrations of particulate matter (PM10, in this city, considering the influence of meteorological variables. Dataanalysis was performed from descriptive statistics, linear correlation and multiple regressions. Data were provided by the State Foundation of Environmental

  12. Evolutionary Stability Against Multiple Mutations

    CERN Document Server

    Ghatak, Anirban; Shaiju, A J

    2012-01-01

    It is known (see e.g. Weibull (1995)) that ESS is not robust against multiple mutations. In this article, we introduce robustness against multiple mutations and study some equivalent formulations and consequences.

  13. Multiple Sclerosis and Vitamin D

    Science.gov (United States)

    ... Editors David C. Spencer, MD Steven Karceski, MD Multiple sclerosis and vitamin D Andrew J. Solomon, MD WHAT ... caused by improper immune responses (autoimmune diseases), including multiple sclerosis (MS). A recent Patient Page in Neurology provided ...

  14. Multiple personality disorder following childbirth.

    Science.gov (United States)

    O'Dwyer, J M; Friedman, T

    1993-06-01

    A case of multiple personality disorder is described as a coping mechanism protecting the patient from the abuse to which she was subjected throughout her life. The multiple personalities became more prominent following the birth of a severely handicapped child.

  15. Rotator Cuff Injuries - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Rotator Cuff Injuries URL of this page: https://medlineplus.gov/ ... V W XYZ List of All Topics All Rotator Cuff Injuries - Multiple Languages To use the sharing features ...

  16. Multiple Intelligences and quotient spaces

    OpenAIRE

    Malatesta, Mike; Quintana, Yamilet

    2006-01-01

    The Multiple Intelligence Theory (MI) is one of the models that study and describe the cognitive abilities of an individual. In [7] is presented a referential system which allows to identify the Multiple Intelligences of the students of a course and to classify the level of development of such Intelligences. Following this tendency, the purpose of this paper is to describe the model of Multiple Intelligences as a quotient space, and also to study the Multiple Intelligences of an individual in...

  17. Multiplicative LSTM for sequence modelling

    OpenAIRE

    Krause, Ben; Lu, Liang; Murray, Iain; Renals, Steve

    2016-01-01

    This paper introduces multiplicative LSTM, a novel hybrid recurrent neural network architecture for sequence modelling that combines the long short-term memory (LSTM) and multiplicative recurrent neural network architectures. Multiplicative LSTM is motivated by its flexibility to have very different recurrent transition functions for each possible input, which we argue helps make it more expressive in autoregressive density estimation. We show empirically that multiplicative LSTM outperforms ...

  18. Bayes multiple decision functions.

    Science.gov (United States)

    Wu, Wensong; Peña, Edsel A

    2013-01-01

    This paper deals with the problem of simultaneously making many (M) binary decisions based on one realization of a random data matrix X. M is typically large and X will usually have M rows associated with each of the M decisions to make, but for each row the data may be low dimensional. Such problems arise in many practical areas such as the biological and medical sciences, where the available dataset is from microarrays or other high-throughput technology and with the goal being to decide which among of many genes are relevant with respect to some phenotype of interest; in the engineering and reliability sciences; in astronomy; in education; and in business. A Bayesian decision-theoretic approach to this problem is implemented with the overall loss function being a cost-weighted linear combination of Type I and Type II loss functions. The class of loss functions considered allows for use of the false discovery rate (FDR), false nondiscovery rate (FNR), and missed discovery rate (MDR) in assessing the quality of decision. Through this Bayesian paradigm, the Bayes multiple decision function (BMDF) is derived and an efficient algorithm to obtain the optimal Bayes action is described. In contrast to many works in the literature where the rows of the matrix X are assumed to be stochastically independent, we allow a dependent data structure with the associations obtained through a class of frailty-induced Archimedean copulas. In particular, non-Gaussian dependent data structure, which is typical with failure-time data, can be entertained. The numerical implementation of the determination of the Bayes optimal action is facilitated through sequential Monte Carlo techniques. The theory developed could also be extended to the problem of multiple hypotheses testing, multiple classification and prediction, and high-dimensional variable selection. The proposed procedure is illustrated for the simple versus simple hypotheses setting and for the composite hypotheses setting

  19. Fluidic Elements based on Coanda Effect

    Directory of Open Access Journals (Sweden)

    Constantin OLIVOTTO

    2010-12-01

    Full Text Available This paper contains first some definitions and classifications regarding the fluidic elements. Thegeneral current status is presented, nominating the main specific elements based on the Coanda effect developedspecially in Romania. In particularly the development of an original bistable element using industrial compressedair at industrial pressure supply is presented. The function of this element is based on the controlled attachmentof the main jet at a curved wall through the Coanda effect. The methods used for particular calculation andexperiments are nominated. The main application of these elements was to develop a specific execution element:a fluidic step–by-step motor based on the Coanda effect.

  20. ACCURACY ANALYSIS FOR QUASI-CAREY ELEMENT

    Institute of Scientific and Technical Information of China (English)

    Dongyang SHI; Xiaobin HAO

    2008-01-01

    In this paper, a new triangular element (Quasi-Carey element) is constructed by the idea of Specht element. It is shown that this Quasi-Carey element possesses a very special property, i.e.,the consistency error is of order O(h2), one order higher than its interpolation error when the exact solution belongs to Ha(Ω). However, the interpolation error and consistency error of Carey element are of order O(h). It seems that the above special property has never been seen for other triangular elements for the second order problems.