WorldWideScience

Sample records for multiphase andnon-isothermal effects

  1. Interface effects on multiphase flows in porous media

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Duan Z [Los Alamos National Laboratory

    2008-01-01

    Most models for multiphase flows in a porous medium are based on the straightforward extension of Darcy's law, in which each fluid phase is driven by its own pressure gradient. The pressure difference between the phases is thought to be an effect of surface tension and is called capillary pressure. Independent of Darcy's law, for liquid imbibition processes in a porous material, diffusion models are sometime used. In this paper, an ensemble phase averaging technique for continuous multi phase flows is applied to derive averaged equations and to examine the validity of the commonly used models. The closure for the averaged equations is quite complicated for general multiphase flows in a porous material. For flows with a small ratio of the characteristic length of the phase interfaces to the macroscopic length, the closure relations can be simplified significantly by an approximation with a second order error in the length ratio. The approximation reveals the information of the length scale separation obscured during the ensemble averaging process, and leads to an equation system similar to Darcy's law, but with additional terms. Based on interactions on phase interfaces, relations among closure quantities are studied.

  2. Failure Mode and Effect Analysis of Subsea Multiphase Pump Equipment

    Directory of Open Access Journals (Sweden)

    Oluwatoyin Shobowale Kafayat

    2014-07-01

    Full Text Available Finding oil and gas reserves in deep/harsh environment with challenging reservoir and field conditions, subsea multiphase pumping benefits has found its way to provide solutions to these issues. Challenges such as failure issues that are still surging the industry and with the current practice of information hiding, this issues becomes even more difficult to tackle. Although, there are some joint industry projects which are only accessible to its members, still there is a need to have a clear understanding of these equipment groups so as to know which issues to focus attention on. A failure mode and effect analysis (FMEA is a potential first aid in understanding this equipment groups. A survey questionnaire/interview was conducted with the oil and gas operating company and equipment manufacturer based on the literature review. The results indicates that these equipment’s group are similar with its onshore counterpart, but the difference is the robustness built into the equipment internal subsystems for subsea applications. The results from the manufacturer perspectives indicates that Helico-axial multiphase pump have a mean time to failure of more than 10 years, twin-screw and electrical submersible pumps are still struggling with a mean time to failure of less than 5 years.

  3. Structured reporting of multiphasic CT for pancreatic cancer: potential effect on staging and surgical planning.

    Science.gov (United States)

    Brook, Olga R; Brook, Alexander; Vollmer, Charles M; Kent, Tara S; Sanchez, Norberto; Pedrosa, Ivan

    2015-02-01

    To compare structured versus nonstructured reporting of multiphasic computed tomography (CT) for staging of pancreatic cancer and the effects of both types of reporting on subjective assessment of resectability. This institutional review board-approved, HIPAA-compliant retrospective study with waiver of informed consent included all patients who were referred for presurgical multiphasic CT of the pancreas between December 2006 and April 2011 at one institution before and after implementation (April 2008) of a structured reporting template. The template was created specifically for reporting multiphasic CT results to stage pancreatic cancer in patients and contained specific information relevant to surgical and oncologic planning. Multiphasic CT reports were assessed for the presence of 12 key features required for staging and surgical planning, including location, size, enhancement, node status, and vascular involvement. Three pancreatic surgeons evaluated the reports to assess resectability, surgical planning, and ease of extracting information before and after reviewing the multiphasic CT images blinded to the patient identifiers. The Student t test and χ(2) test were used for statistical analysis. Forty-eight (40%) structured and 72 (60%) nonstructured multiphasic CT reports were reviewed. Nonstructured reports contained a mean ± standard deviation of 7.3 key features ± 2.1 (range, 1-11) and structured reports contained 10.6 ± 0.9 (range, 9-12) features (P planning was deemed easily accessible in 94%, 60%, and 98% of structured and 47%, 54%, and 32% of nonstructured reports by the three surgeons, respectively (P planning in 96%, 69%, and 98% of structured and 31%, 43%, and 25% of nonstructured reports (P planning. Surgeons were more confident regarding decisions about tumor resectability when they reviewed structured reports before review of multiphasic CT images. © RSNA, 2014.

  4. Modelling and simulation of multi-phase effects on X-ray elasticity constants

    Energy Technology Data Exchange (ETDEWEB)

    Freour, S.; Gloaguen, D.; Guillen, R. [Laboratoire d' Applications des Materiaux a la Mecanique (L.A.M.M.), L.A.M.M.-C.R.T.T., Boulevard de L' Universite, BP 406, 44602 Saint Nazaire Cedex (France); Francois, M. [Laboratoire des Systemes Mecaniques et d' Ingenierie Simultanee (L.A.S.M.I.S.), Universite de Technologie de Troyes, 12 Rue Marie Curie, BP 2060, 10010 Troyes (France)

    2003-10-01

    This paper deals with the calculation of X-ray Elasticity Constants (XEC) of phases embedded in multi-phase polycrystals. A three scales (macroscopic, pseudo-macroscopic, mesoscopic) model based on the classical self-consistent formalism is developed in order to analyse multi-phase effects on XEC values. Simulations are performed for cubic or hexagonal crystallographic structure phases embedded in several two-phases materials. In fact, it is demonstrated that XEC vary with the macroscopic stiffness of the whole polycrystal. In consequence, the constants of one particular phase depend on the elastic behaviour and the volume fraction of all the phases constituting the material. Now, XEC play a leading role in pseudo-macroscopic stresses determination by X-Ray Diffraction (XRD) methods. In this work, a quantitative analysis of the multi-phase effects on stresses determination by XRD methods was performed. Numerical results will be compared and discussed. (Abstract Copyright [2003], Wiley Periodicals, Inc.)

  5. Modeling and Computing Example for Effective Electromagnetic Parameters of Multiphase Composite Media

    Institute of Scientific and Technical Information of China (English)

    SONG Wei-Li; YUAN Jie; HOU Zhi-Ling; CAO Mao-Sheng

    2009-01-01

    A method using strong fluctuation theory (SFT) to compute the effective electromagnetic parameters of multiphase composite media, and common materials used to design radar-absorbing materials, is demonstrated. The effective electromagnetic parameters of ultrafine caxbonyl-iron (DT-50) and fiber fabric, which are both multiphase composite media and represent coated and structured radar absorbing materials, respectively, are investigated, and the corresponding equations of electromagnetic parameters by using the SFT axe attained. Moreover, we design a program to simplify the solutions, and the results are discussed.

  6. Non-isothermal effects on multi-phase flow in porous medium

    DEFF Research Database (Denmark)

    Singh, Ashok; Wang, W; Park, C. H.

    2010-01-01

    In this paper a ppT -formulation for non-isothermal multi-phase flow is given including diffusion and latent heat effects. Temperature and pressure dependencies of governing parameters are considered, in particular surface tension variation on phase interfaces along with temperature changes. A weak...

  7. Effect of forward looking sites on a multi-phase lattice hydrodynamic model

    Science.gov (United States)

    Redhu, Poonam; Gupta, Arvind Kumar

    2016-03-01

    A new multi-phase lattice hydrodynamic traffic flow model is proposed by considering the effect of multi-forward looking sites on a unidirectional highway. We examined the qualitative properties of proposed model through linear as well as nonlinear stability analysis. It is shown that the multi-anticipation effect can significantly enlarge the stability region on the phase diagram and exhibit three-phase traffic flow. It is also observed that the multi-forward looking sites have prominent influence on traffic flow when driver senses the relative flux of leading vehicles. Theoretical findings are verified using numerical simulation which confirms that the traffic jam is suppressed efficiently by considering the information of leading vehicles in unidirectional multi-phase traffic flow.

  8. Multi-phase flow effect on SRM nozzle flow field and thermal protection materials

    Institute of Scientific and Technical Information of China (English)

    SHAFQAT Wahab; XIE Kan; LIU Yu

    2009-01-01

    Multi-phase flow effect generated from the combustion of aluminum based com-posite propellant was performed on the thermal protection material of solid rocket motor (SRM) nozzle. Injection of alumina (Al2O3) particles from 5% to 10% was tried on SRM nozzle flow field to see the influence of multiphase flow on heat transfer computations. A coupled, time resolved CFD (computational fluid dynamics) approach was adopted to solve the conjugate problem of multi-phase fluid flow and heat transfer in the solid rocket motor nozzle. The governing equations are discretized by using the finite volume method. Spalart-Allmaras (S-A) turbulence model was employed. The computation was executed on the dif-ferent models selected for the analysis to validate the temperature variation in the throat in-serts and baking material of SRM nozzle. Comparison for temperatures variations were also carried out at different expansion ratios of nozzle. This paper also characterized the advanced SRM nozzle composites material for their high thermo stability and their high thermo me-chanical capabilities to make it more reliable simpler and lighter.

  9. Dynamic effects in multiphase flow: A pore-scale network approach

    NARCIS (Netherlands)

    Gielen, T.; Hassanizadeh, S.M.; Leijnse, A.; Nordhaug, H.F.

    2005-01-01

    Current theories of multiphase flow rely on capillary pressure and saturation relationships that are commonly measured under static conditions. To incorporate transient behaviour, new multiphase flow theories have been proposed. These include an extended capillary pressure-saturation relationship

  10. Dynamic effects in multiphase flow: A pore-scale network approach

    NARCIS (Netherlands)

    Gielen, T.; Hassanizadeh, S.M.; Leijnse, A.; Nordhaug, H.F.

    2005-01-01

    Current theories of multiphase flow rely on capillary pressure and saturation relationships that are commonly measured under static conditions. To incorporate transient behaviour, new multiphase flow theories have been proposed. These include an extended capillary pressure-saturation relationship th

  11. Constitutive Relations for Reactive Transport Modeling: Effects of Chemical Reactions on Multi-Phase Flow Properties

    Science.gov (United States)

    Zhang, S.; Liu, H. H.; van Dijke, M. I.; Geiger, S.; Agar, S. M.

    2016-12-01

    The relationship between flow properties and chemical reactions is key to modeling subsurface reactive transport. This study develops closed-form equations to describe the effects of mineral precipitation and dissolution on multiphase flow properties (capillary pressure and relative permeabilities) of porous media. The model accounts for the fact that precipitation/dissolution only takes place in the water-filled part of pore space. The capillary tube concept was used to connect pore-scale changes to macroscopic hydraulic properties. Precipitation/dissolution induces changes in the pore radii of water-filled pores and consequently in the pore-size distribution. The updated pore-size distribution is converted back to a new capillary pressure-water saturation relation from which the new relative permeabilities are calculated. Pore network modeling is conducted on a Berea sandstone to validate the new continuum-scale relations. The pore network modeling results are satisfactorily predicted by the new closed-form equations. Currently the effects of chemical reactions on flow properties are represented as a relation between permeability and porosity in reactive transport modeling. Porosity is updated after chemical calculations from the change of mineral volumes, then permeability change is calculated from the porosity change using an empirical permeability-porosity relation, most commonly the Carman-Kozeny relation, or the Verma-Pruess relation. To the best of our knowledge, there are no closed-form relations available yet for the effects of chemical reactions on multi-phase flow properties, and thus currently these effects cannot be accounted for in reactive transport modeling. This work presents new constitutive relations to represent how chemical reactions affect multi-phase flow properties on the continuum scale based on the conceptual model of parallel capillary tubes. The parameters in our new relations are either pre-existing input in a multi-phase flow

  12. Effects of magnetic fluids on crystallization characterizations in a multi-component and multiphase system

    Institute of Scientific and Technical Information of China (English)

    SHU BiFen; SHEN Hui; CHEN MeiYuan; XIA JianHan; WANG Xiang; SUN JianWei

    2008-01-01

    In this study, experiments are carried out on the effects of magnetic fluids on the crystallization char- acterizations in a multi-component and multiphase system, which contains the liquid and the vapor of HCFC141b, water, water vapor, and gas hydrates. The mass transfer phenomena between the phase interfaces of water-HCFC141b and water-vapor are also researched. The experimental results show that in the presence of a rotary magnetic field, magnetic fluids can remarkably enhance the heat and mass transfer between phase interfaces and, therefore, improve the performance of crystallization, especially in improving the formation temperature and velocity.

  13. Viscosity and surface tension effects during multiphase flow in propped fractures

    Science.gov (United States)

    Dzikowski, Michał; Dąbrowski, Marcin

    2017-04-01

    Geological sequestration of CO2 was proposed as an important mechanism to reduce its emission into atmosphere. CO2 exhibits a higher affinity to organic matter than methane molecules and, potentially, it could be pumped and stored in shale reservoirs while enhancing late stage shale gas production. A successful analysis of CO2 sequestration in low matrix permeability rocks such as shales requires a thorough understanding of multiphase flow in stimulated rock fractures, which provide most significant pathways for fluids in such systems. Multiphase fracture flows are also of great relevance to brine, oil and gas migration in petroleum systems, water and stream circulation in geothermal reservoirs, and chemical transport of non-aqueous phase liquids in shallow hydrogeological systems, particularly in partially saturated zones. There are various physical models that describe phenomena taking place during multiphase flow through porous media. One of key aspects that need to be considered are pore-scale effects related to capillarity. Unfortunately, detailed models that describe motion and evolution of phase or component boundary require direct numerical simulations and spatial resolutions that are hard to reach when considering industrial relevant systems. Main aim of the presented work was the development of reduced 2.5D models based on Brinkman approximation of thin domain flow that would be able to capture local scale phenomena without expensive 3D simulations. Presented approach was designed specifically to tackle incompressible and immiscible systems and is based on Continuous Surface Force approach presented by Brackbill et al., implemented using Lattice Boltzmann Method. Presented approach where firstly validated against standard test cases with known classical solution and known experimental data. In the second part, we present and discuss two component, immiscible permeability data for rough and propped fracture obtained with our code for a rage of proppants

  14. Annular multiphase flow behavior during deep water drilling and the effect of hydrate phase transition

    Institute of Scientific and Technical Information of China (English)

    Wang Zhiyuan; Sun Baojiang

    2009-01-01

    It is very important to understand the annular multiphase flow behavior and the effect of hydrate phase transition during deep water drilling. The basic hydrodynamic models, including mass, momentum, and energy conservation equations, were established for annular flow with gas hydrate phase transition during gas kick. The behavior of annular multiphase flow with hydrate phase transition was investigated by analyzing the hydrate-forming region, the gas fraction in the fluid flowing in the annulus, pit gain, bottom hole pressure, and shut-in casing pressure. The simulation shows that it is possible to move the hydrate-forming region away from sea floor by increasing the circulation rate. The decrease in gas volume fraction in the annulus due to hydrate formation reduces pit gain, which can delay the detection of well kick and increase the risk of hydrate plugging in lines. Caution is needed when a well is monitored for gas kick at a relatively low gas production rate, because the possibility of hydrate presence is much greater than that at a relatively high production rate. The shut-in casing pressure cannot reflect the gas kick due to hydrate formation, which increases with time.

  15. Towards ultra-high ductility TRIP-assisted multiphase steels controlled by strain gradient plasticity effects

    Science.gov (United States)

    Hatami, M. K.; Pardoen, T.; Lacroix, G.; Berke, P.; Jacques, P. J.; Massart, T. J.

    2017-01-01

    TRansformation Induced Plasticity (TRIP) is a very effective mechanism to increase the strain hardening capacity of multiphase steels containing a fraction of metastable austenite, leading to both high strength and large uniform elongation. Excellent performances have been reached in the past 20 years, with recent renewed interest through the development of the 3rd generation of high strength steels often involving a TRIP effect. The microstructure and composition optimization is complex due to the interplay of coupled effects on the transformation kinetics and work hardening such as phase stability, size of retained austenite grains, temperature and loading path. In particular, recent studies have shown that the TRIP effect can only be quantitatively captured for realistic microstructures if strain gradient plasticity effects are taken into account, although direct experimental validation of this claim is missing. Here, an original computational averaging scheme is developed for predicting the elastoplastic response of TRIP aided multiphase steels based on a strain gradient plasticity model. The microstructure is represented by an aggregate of many elementary unit cells involving each a fraction of retained austenite with a specified stability. The model parameters, involving the transformation kinetics, are identified based on experimental tensile tests performed at different temperatures. The model is further assessed towards original experiments, involving temperature changes during deformation. A classical size independent plasticity model is shown unable to capture the TRIP effect on the mechanical response. Conversely, the strain gradient formulation properly predicts substantial variations of the strain hardening with deformation and temperature, hence of the uniform elongation in good agreement with the experiments. A parametric study is performed to get more insight on the effect of the material length scale as well as to determine optimum transformation

  16. Effects of finishing rolling temperatures and reduction on the mechanical properties of hot rolled multiphase steel

    Institute of Scientific and Technical Information of China (English)

    LI Zhuang; WU Di

    2007-01-01

    Effects of finishing rolling temperatures and reduction on the mechanical properties of hot rolled multiphase steel were investigated. Thermo-mechanical control processing (TMCP) was conducted by using a laboratory hot rolling mill, in which three different kinds of finishing rolling temperatures and reduction and various austempering times were applied. The results showed that polygonal ferrite, granular bainite and larger amount of stabilized retained austenite can be obtained by controlled rolling processes, and that the strain-induced transformation to martensite from the retained austenite can occur gradually when the steel is deformed during tensile test. Mechanical properties increase with decreasing finishing rolling temperature and increasing amount of deformation. The most TRIP (transformation induced plasticity) effect, and ultimate tensile strength (UTS), total elongation (TEL) and the product of ultimate tensile strength and total elongation (UTS× TEL) are obtained at 20 min.

  17. The Effect of a Multiphase Microstructure on the Inverse Magnetocaloric Effect in Ni–Mn–Cr–Sn Metamagnetic Heusler Alloys

    Directory of Open Access Journals (Sweden)

    Paweł Czaja

    2017-07-01

    Full Text Available Two Ni–Mn–Sn alloys substituted with 0.5 and 1 at.% Cr have been studied. The first alloy shows an average composition of Ni49.6Mn37.3Cr0.7Sn12.4 (e/a = 8.107, whereas the second has a multiphase microstructure with the matrix phase of an average Ni52.4Mn32.7Cr1Sn14 composition (e/a = 8.146. Both alloys undergo a reversible martensitic phase transformation. The Ni49.6Mn37.3Cr0.7Sn12.4 alloy transforms to the martensite phase at 239 K and, under the magnetic field change of μ0·ΔH = 1.5 T, gives the magnetic entropy change equal to 7.6 J/kg·K. This amounts to a refrigerant capacity in the order of 48.6 J/kg, reducible by 29.8% due to hysteresis loss. On the other hand, the alloy with a multiphase microstructure undergoes the martensitic phase transformation at 223 K with the magnetic entropy change of 1.7 J/kg·K (1 T. Although the latter spreads over a broader temperature window in the multiphase alloy, it gives much smaller refrigerant capacity of 16.2 J/kg when compared to Ni49.6Mn37.3Cr0.7Sn12.4. The average hysteresis loss for a field change of 1.5 T in the multiphase alloy is 2.7 J/kg, reducing the effective refrigerant capacity by 16.7%. These results illustrate that the key to gaining a large effective refrigerant capacity is the synergy between the magnitude of the magnetic entropy change and its broad temperature dependence.

  18. Effect of Thermomechanical Processing on Mechanical Properties of Hot Rolled Multiphase Steel

    Institute of Scientific and Technical Information of China (English)

    LI Zhuang; WU Di; L(U) Hui-sheng

    2008-01-01

    The effect of thermomechanical processing (TMP) on the mechanical properties of hot rolled multiphase steel was investigated. TMP was conducted using a laboratory hot rolling mill, in which three different kinds of finish rolling deformation degrees and temperatures were applied. The results indicate that polygonal ferrite, granular bainite, and a considerable amount of stabilized retained austenite can be obtained by TMP. The stability of the retained austenite increases with decreasing finish rolling temperature and increasing finish rolling deformation degrees. Ultimate tensile strength (σb), total elongation (δ), and the product of ultimate tensile strength by total elongation (σb·δ) for 50% reduction at finish rolling temperature of 700 ℃ reach maximum values [791 MPa, 36% and 28 476 (MPa·%), respectively].

  19. Practical aspects and uncertainty analysis of biological effective dose (BED) regarding its three-dimensional calculation in multiphase radiotherapy treatment plans

    Energy Technology Data Exchange (ETDEWEB)

    Kauweloa, Kevin I., E-mail: Kauweloa@livemail.uthscsa.edu; Gutierrez, Alonso N.; Bergamo, Angelo; Stathakis, Sotirios; Papanikolaou, Nikos; Mavroidis, Panayiotis [Department of Radiology, University of Texas Health Science Center at San Antonio, San Antonio, Texas 78229 and Cancer Therapy and Research Center, San Antonio, Texas 78229 (United States)

    2014-07-15

    Purpose: There is a growing interest in the radiation oncology community to use the biological effective dose (BED) rather than the physical dose (PD) in treatment plan evaluation and optimization due to its stronger correlation with radiobiological effects. Radiotherapy patients may receive treatments involving a single only phase or multiple phases (e.g., primary and boost). Since most treatment planning systems cannot calculate the analytical BED distribution in multiphase treatments, an approximate multiphase BED expression, which is based on the total physical dose distribution, has been used. The purpose of this paper is to reveal the mathematical properties of the approximate BED formulation, relative to the true BED. Methods: The mathematical properties of the approximate multiphase BED equation are analyzed and evaluated. In order to better understand the accuracy of the approximate multiphase BED equation, the true multiphase BED equation was derived and the mathematical differences between the true and approximate multiphase BED equations were determined. The magnitude of its inaccuracies under common clinical circumstances was also studied. All calculations were performed on a voxel-by-voxel basis using the three-dimensional dose matrices. Results: Results showed that the approximate multiphase BED equation is accurate only when the dose-per-fractions (DPFs) in both the first and second phases are equal, which occur when the dose distribution does not significantly change between the phases. In the case of heterogeneous dose distributions, which significantly vary between the phases, there are fewer occurrences of equal DPFs and hence the inaccuracy of the approximate multiphase BED is greater. These characteristics are usually seen in the dose distributions being delivered to organs at risk rather than to targets. Conclusions: The finding of this study indicates that the true multiphase BED equation should be implemented in the treatment planning

  20. Gray free-energy multiphase lattice Boltzmann model with effective transport and wetting properties.

    Science.gov (United States)

    Zalzale, Mohamad; Ramaioli, M; Scrivener, K L; McDonald, P J

    2016-11-01

    The paper shows that it is possible to combine the free-energy lattice Boltzmann approach to multiphase modeling of fluids involving both liquid and vapor with the partial bounce back lattice Boltzmann approach to modeling effective media. Effective media models are designed to mimic the properties of porous materials with porosity much finer than the scale of the simulation lattice. In the partial bounce-back approach, an effective media parameter or bounce-back fraction controls fluid transport. In the combined model, a wetting potential is additionally introduced that controls the wetting properties of the fluid with respect to interfaces between free space (white nodes), effective media (gray nodes), and solids (black nodes). The use of the wetting potential combined with the bounce-back parameter gives the model the ability to simulate transport and sorption of a wide range of fluid in material systems. Results for phase separation, permeability, contact angle, and wicking in gray media are shown. Sorption is explored in small sections of model multiscale porous systems to demonstrate two-step desorption, sorption hysteresis, and the ink-bottle effect.

  1. Gray free-energy multiphase lattice Boltzmann model with effective transport and wetting properties

    Science.gov (United States)

    Zalzale, Mohamad; Ramaioli, M.; Scrivener, K. L.; McDonald, P. J.

    2016-11-01

    The paper shows that it is possible to combine the free-energy lattice Boltzmann approach to multiphase modeling of fluids involving both liquid and vapor with the partial bounce back lattice Boltzmann approach to modeling effective media. Effective media models are designed to mimic the properties of porous materials with porosity much finer than the scale of the simulation lattice. In the partial bounce-back approach, an effective media parameter or bounce-back fraction controls fluid transport. In the combined model, a wetting potential is additionally introduced that controls the wetting properties of the fluid with respect to interfaces between free space (white nodes), effective media (gray nodes), and solids (black nodes). The use of the wetting potential combined with the bounce-back parameter gives the model the ability to simulate transport and sorption of a wide range of fluid in material systems. Results for phase separation, permeability, contact angle, and wicking in gray media are shown. Sorption is explored in small sections of model multiscale porous systems to demonstrate two-step desorption, sorption hysteresis, and the ink-bottle effect.

  2. Effect of Organic Coatings, Humidity and Aerosol Acidity on Multiphase Chemistry of Isoprene Epoxydiols

    Energy Technology Data Exchange (ETDEWEB)

    Riva, Matthieu; Bell, David M.; Hansen, Anne-Maria Kaldal; Drozd, Greg T.; Zhang, Zhenfa; Gold, Avram; Imre, Dan; Surratt, Jason D.; Glasius, Marianne; Zelenyuk, Alla

    2016-06-07

    Multiphase chemistry of isomeric isoprene epoxydiols (IEPOX) has been shown to be the dominant source of isoprene-derived secondary organic aerosol (SOA). Recent studies have reported particles composed of ammonium bisulfate (ABS) mixed with model organics exhibit slower rates of IEPOX uptake. In the present study, we investigate the effect of atmospherically-relevant organic coatings of α-pinene (AP) SOA on the reactive uptake of trans-β-IEPOX onto ABS particles under different conditions and coating thicknesses. Single particle mass spectrometry was used to characterize in real-time particle size, shape, density, and quantitative composition before and after reaction with IEPOX. We find that IEPOX uptake by pure sulfate particles is a volume-controlled process, which results in particles with uniform concentration of IEPOX-derived SOA across a wide range of sizes. Aerosol acidity was shown to enhance IEPOX-derived SOA formation, consistent with recent studies. The presence of water has a weaker impact on IEPOX-derived SOA yield, but significantly enhanced formation of 2-methyltetrols, consistent with offline filter analysis. In contrast, IEPOX uptake by ABS particles coated by AP-derived SOA is strongly dependent on particle size and composition. IEPOX uptake occurred only when weight fraction of AP-derived SOA dropped below 50 %, effectively limiting IEPOX uptake to larger particles.

  3. Effect of Organic Coatings, Humidity and Aerosol Acidity on Multiphase Chemistry of Isoprene Epoxydiols.

    Science.gov (United States)

    Riva, Matthieu; Bell, David M; Hansen, Anne-Maria Kaldal; Drozd, Greg T; Zhang, Zhenfa; Gold, Avram; Imre, Dan; Surratt, Jason D; Glasius, Marianne; Zelenyuk, Alla

    2016-06-07

    Multiphase chemistry of isomeric isoprene epoxydiols (IEPOX) has been shown to be the dominant source of isoprene-derived secondary organic aerosol (SOA). Recent studies have reported particles composed of ammonium bisulfate (ABS) mixed with model organics exhibit slower rates of IEPOX uptake. In the present study, we investigate the effect of atmospherically relevant organic coatings of α-pinene (AP) SOA on the reactive uptake of trans-β-IEPOX onto ABS particles under different conditions and coating thicknesses. Single particle mass spectrometry was used to characterize in real-time particle size, shape, density, and quantitative composition before and after reaction with IEPOX. We find that IEPOX uptake by pure sulfate particles is a volume-controlled process, which results in particles with uniform concentration of IEPOX-derived SOA across a wide range of sizes. Aerosol acidity was shown to enhance IEPOX-derived SOA formation, consistent with recent studies. The presence of water has a weaker impact on IEPOX-derived SOA yield, but significantly enhanced formation of 2-methyltetrols, consistent with offline filter analysis. In contrast, IEPOX uptake by ABS particles coated with AP-derived SOA is lower compared to that of pure ABS particles, strongly dependent on particle composition, and therefore on particle size.

  4. Effect of arc current on droplet ejection from tungsten-based electrode in multiphase AC arc

    Science.gov (United States)

    Hashizume, Taro; Tanaka, Manabu; Watanabe, Takayuki

    2017-05-01

    The dynamic behavior of droplet ejection from a tungsten electrode was successfully visualized using a high-speed camera and an appropriate band-pass filter. The effect of arc current on droplet ejection was investigated to understand the electrode erosion mechanism in the multiphase AC arc. The rate of erosion by droplet ejection increased with increasing current. This result was examined on the basis of the time variation in forces on a pending droplet at the electrode tip during the AC cycle. The relationship among electromagnetic force, surface tension, and ion pressure on the molten tip during the cathodic period is crucial for controling droplet ejection. The molten tip becomes hemispherical forming the pending droplet with an increase in the instantaneous value of arc current during the AC cycle. The pending droplet detaches from the electrode surface when electromagnetic force becomes the dominant force. Consequently, a higher rate of erosion by droplet ejection with a higher arc current resulted from a stronger electromagnetic force.

  5. Effects of Warm Deformation on Mechanical Properties of TRIP Aided Fe-C-Mn-Si Multiphase Steel

    Institute of Scientific and Technical Information of China (English)

    TIAN Yong; LI Zhuan~

    2012-01-01

    Warm deformation tests were performed using a kind of tubby heater. The microstructures and mechanical properties of an Fe-C-Mn-Si multiphase steel resulting from different warm deformation temperatures were investiga- ted by using LOM (light optical microscopy), SEM and XRD. The results indicated that the microstructure contai- ning polygonal ferrite, granular bainite and a significant amount of the stable retained austenite can be obtained through hot deformation and subsequent austempering. Warm deformation temperature affects the mechanical prop- erties of the hot rolled TRIP steels. Ultimate tensile strength balance reached maximum (881 MPa) when the speci- men was deformed at 250 ~C, and the total elongation and strength-ductility reached maximum (38% and 28 614 MPa ~ ~, respectively) at deforming temperature of 100 ~C. Martensite could nucleate when austenite was deformed above M~, because mechanical driving force compensates the decrease of chemical driving force. The TRIP effect occurs in the Fe-C-Mn-Si multiphase steel at deforming temperature ranging from 15 to 350 ~C. The results of the effects of warm deformation on the mechanical properties of the Fe-C-Mn-Si multiphase steel can provide theoretical basis for the ap- plications and the warm working of the hot rolled TRIP sheet steels in industrial manufacturing.

  6. Effect of multiphase radiation on coal combustion in a pulverized coal jet flame

    Science.gov (United States)

    Wu, Bifen; Roy, Somesh P.; Zhao, Xinyu; Modest, Michael F.

    2017-08-01

    The accurate modeling of coal combustion requires detailed radiative heat transfer models for both gaseous combustion products and solid coal particles. A multiphase Monte Carlo ray tracing (MCRT) radiation solver is developed in this work to simulate a laboratory-scale pulverized coal flame. The MCRT solver considers radiative interactions between coal particles and three major combustion products (CO2, H2O, and CO). A line-by-line spectral database for the gas phase and a size-dependent nongray correlation for the solid phase are employed to account for the nongray effects. The flame structure is significantly altered by considering nongray radiation and the lift-off height of the flame increases by approximately 35%, compared to the simulation without radiation. Radiation is also found to affect the evolution of coal particles considerably as it takes over as the dominant mode of heat transfer for medium-to-large coal particles downstream of the flame. To investigate the respective effects of spectral models for the gas and solid phases, a Planck-mean-based gray gas model and a size-independent gray particle model are applied in a frozen-field analysis of a steady-state snapshot of the flame. The gray gas approximation considerably underestimates the radiative source terms for both the gas phase and the solid phase. The gray coal approximation also leads to under-prediction of the particle emission and absorption. However, the level of under-prediction is not as significant as that resulting from the employment of the gray gas model. Finally, the effect of the spectral property of ash on radiation is also investigated and found to be insignificant for the present target flame.

  7. Cause and Effect of Feedback: Multiphase Gas in Cluster Cores Heated by AGN Jets

    CERN Document Server

    Gaspari, M; Sharma, P

    2011-01-01

    Multiwavelength data indicate that the X-ray emitting plasma in the cores of galaxy clusters is not cooling catastrophically. To large extent, cooling is offset by heating due to active galactic nuclei (AGN) via jets. The cool-core clusters, with cooler/denser plasmas, show multiphase gas and signs of some cooling in their cores. These observations suggest that the cool core is locally thermally unstable while maintaining global thermal equilibrium. Using high-resolution, three-dimensional simulations we study the formation of multiphase gas in cluster cores heated by highly-collimated bipolar AGN jets. Our key conclusion is that spatially extended multiphase filaments form only when the instantaneous ratio of the thermal instability and free-fall timescales (t_TI/t_ff) falls below a critical threshold of \\approx 10. When this happens, dense cold gas decouples from the hot ICM phase and generates inhomogeneous and spatially extended Halpha filaments. These cold gas clumps and filaments `rain' down onto the ce...

  8. Effect of wettability on scale-up of multiphase flow from core-scale to reservoir fine-grid-scale

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Y.C.; Mani, V.; Mohanty, K.K. [Univ. of Houston, TX (United States)

    1997-08-01

    Typical field simulation grid-blocks are internally heterogeneous. The objective of this work is to study how the wettability of the rock affects its scale-up of multiphase flow properties from core-scale to fine-grid reservoir simulation scale ({approximately} 10{prime} x 10{prime} x 5{prime}). Reservoir models need another level of upscaling to coarse-grid simulation scale, which is not addressed here. Heterogeneity is modeled here as a correlated random field parameterized in terms of its variance and two-point variogram. Variogram models of both finite (spherical) and infinite (fractal) correlation length are included as special cases. Local core-scale porosity, permeability, capillary pressure function, relative permeability functions, and initial water saturation are assumed to be correlated. Water injection is simulated and effective flow properties and flow equations are calculated. For strongly water-wet media, capillarity has a stabilizing/homogenizing effect on multiphase flow. For small variance in permeability, and for small correlation length, effective relative permeability can be described by capillary equilibrium models. At higher variance and moderate correlation length, the average flow can be described by a dynamic relative permeability. As the oil wettability increases, the capillary stabilizing effect decreases and the deviation from this average flow increases. For fractal fields with large variance in permeability, effective relative permeability is not adequate in describing the flow.

  9. Multiscale thermomechanical analysis of multiphase materials

    NARCIS (Netherlands)

    Yadegari Varnamkhasti, S.

    2015-01-01

    The thermomechanical simulation of materials with evolving, multiphase microstructures poses various modeling and numerical challenges. For example, the separate phases in a multiphase microstructure can interact with each other during thermal and/or mechanical loading, the effect of which is

  10. Stability of retained austenite in multi-phase microstructure during austempering and its effect on the ductility of a low carbon steel

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Z.J.; Ren, Y.Q.; Zhou, W.H. [School of Materials Science and Engineering, University of Science and Technology, Beijing (China); Yang, J.R. [Department of Materials Science and Engineering, National Taiwan University, Taipei, Taiwan (China); Shang, C.J., E-mail: cjshang@ustb.edu.cn [School of Materials Science and Engineering, University of Science and Technology, Beijing (China); Misra, R.D.K. [Laboratory for Excellence in Advanced Steel Research, Center for Structural and Functional Materials, Institute for Material Research and Innovation, University of Louisiana at Lafayette, P.O. Box 44130, Lafayette, LA 70503 (United States)

    2014-05-01

    The contribution of multi-phase microstructure and retained austenite on mechanical properties of austempered and intercritical annealed Fe–0.23C–1.8Mn–1.35Si (wt%) steel was studied. The multi-phase microstructure comprised of intercritical ferrite (IF), bainite/martensite, and retained austenite. During austempering, the retained austenite was stabilized, which was studied using a combination of experimental (XRD, TEM) and thermodynamic analysis. The termination of bainitic transformation combined with carbon rejection into residual austenite during the second step austempering treatment is believed to be the underlying basis for stabilization of retained austenite. This led to significant increase in uniform and total elongation (25% and 36%, respectively) and the product of tensile strength and % elongation was 33 GPa%. The work hardening behavior of retained austenite exhibited a three-stage process such that necking was delayed. The increased work hardening rate is attributed to the multi-phase microstructure and TRIP effect.

  11. On the Takayanagi principle for the shape memory effect and thermomechanical behaviors in polymers with multi-phases

    Science.gov (United States)

    Lu, Haibao; Yu, Kai; Huang, Wei Min; Leng, Jinsong

    2016-12-01

    We present an explicit model to study the mechanics and physics of the shape memory effect (SME) in polymers based on the Takayanagi principle. The molecular structural characteristics and elastic behavior of shape memory polymers (SMPs) with multi-phases are investigated in terms of the thermomechanical properties of the individual components, of which the contributions are combined by using Takayanagi’s series-parallel model and parallel-series model, respectively. After that, Boltzmann superposition principle is employed to couple the multi-SME, elastic modulus parameter (E) and temperature parameter (T) in SMPs. Furthermore, the extended Takayanagi model is proposed to separate the plasticizing effect and physical swelling effect on the thermo-/chemo-responsive SME in polymers and then compared with the available experimental data reported in the literature. This study is expected to provide a powerful simulation tool for modeling and experimental substantiation of the mechanics and working mechanism of SME in polymers.

  12. Modeling multiphase materials processes

    CERN Document Server

    Iguchi, Manabu

    2010-01-01

    ""Modeling Multiphase Materials Processes: Gas-Liquid Systems"" describes the methodology and application of physical and mathematical modeling to multi-phase flow phenomena in materials processing. The book focuses on systems involving gas-liquid interaction, the most prevalent in current metallurgical processes. The performance characteristics of these processes are largely dependent on transport phenomena. This volume covers the inherent characteristics that complicate the modeling of transport phenomena in such systems, including complex multiphase structure, intense turbulence, opacity of

  13. Effect of surface chemistry on the behaviour of solid particles in multiphase flow

    Energy Technology Data Exchange (ETDEWEB)

    Gulbrandsen, Egil; Pedersen, Anette

    2006-03-15

    The surface chemical properties of solids particles strongly influence their behaviour in multiphase flow, e.g. their tendency to be transported by the oil or water phase, their tendency to stick to the oil-water interfaces, or their tendency to aggregate. The behaviour of the solid particles may influence various processes such as emulsion breakdown, oil-water separation, or sedimentation of solids in a pipeline, and thereby issues as erosion, and corrosion under deposits. These issues were addressed in the present laboratory study. The reported results focus on behaviour of sand in a simple oil-water system in presence of a model corrosion inhibitor compound, cetyltrimethylammonium bromide. A refined oil was used in the tests. The system was studied by various methods like zeta-potential measurements, assessment of wetting properties and tendency of aggregation and sedimentation in oil-water system. It was found that surface-active corrosion inhibitor could strongly influence the wetting of the sand. By addition of the corrosion inhibitor, the sand changed from water wet to oil wet. This change induced a tendency to aggregation of the sand grains. The aggregation led to sticky deposits of sand. This may have an impact on under deposit corrosion phenomena. (Author)

  14. Effects of Average and Point Capillary Pressure-Saturation Function Parameters on Multiphase Flow Simulations

    Science.gov (United States)

    Cheng, C.; Perfect, E.; Cropper, C.

    2011-12-01

    Numerical models are an important tool in petroleum engineering, geoscience, and environmental applications, e.g. feasibility evaluation and prediction for enhanced oil recovery, enhanced geothermal systems, geological carbon storage, and remediation of contaminated sites. Knowledge of capillary pressure-saturation functions is essential in such applications for simulating multiphase fluid flow and chemical transport in variably-saturated rocks and soils in the subsurface. Parameters from average capillary pressure-saturation functions are sometimes employed due to their relative ease of measurement in the laboratory. However, the use of average capillary pressure-saturation function parameters instead of point capillary pressure-saturation function parameters for numerical simulations of flow and transport can result in significant errors, especially in the case of coarse-grained sediments and fractured rocks. Such erroneous predications can impose great risks and challenges to decision-making. In this paper we present a comparison of simulation results based on average and point estimates of van Genuchten model parameters (Sr, α, and n) for Berea sandstone, packed glass beads, and Hanford sediments. The capillary pressure-saturation functions were measured using steady-state centrifugation. Average and point parameters were estimated for each sample using the averaging and integral methods, respectively. Results indicated that the Sr and α parameters estimated using averaging and integral methods were close to a 1-to-1 correspondence, with R-squared values of 0.958 and 0.994, respectively. The n parameter, however, showed a major curvilinear deviation from the 1-to-1 line for the two estimation methods. This trend indicates that the averaging method systematically underestimates the n parameter relative to the point-based estimates of the integral method leading to an over predication of the breadth of the pore size distribution. Forward numerical simulations

  15. Multiphase Allen-Cahn and Cahn-Hilliard models and their discretizations with the effect of pairwise surface tensions

    Science.gov (United States)

    Wu, Shuonan; Xu, Jinchao

    2017-08-01

    In this paper, the mathematical properties and numerical discretizations of multiphase models that simulate the phase separation of an N-component mixture are studied. For the general choice of phase variables, the unisolvent property of the coefficient matrix involved in the N-phase models based on the pairwise surface tensions is established. Moreover, the symmetric positive-definite property of the coefficient matrix on an (N - 1)-dimensional hyperplane - which is of fundamental importance to the well-posedness of the models - can be proved equivalent to some physical condition for pairwise surface tensions. The N-phase Allen-Cahn and N-phase Cahn-Hilliard equations can then be derived from the free-energy functional. A natural property is that the resulting dynamics of concentrations are independent of phase variables chosen. Finite element discretizations for N-phase models can be obtained as a natural extension of the existing discretizations for the two-phase model. The discrete energy law of the numerical schemes can be proved and numerically observed under some restrictions pertaining to time step size. Numerical experiments including the spinodal decomposition and the evolution of triple junctions are described in order to investigate the effect of pairwise surface tensions.

  16. Supernova-regulated ISM: the effects of radiative cooling and thermal conductivity on the multi-phase structure

    CERN Document Server

    Gent, Frederick; Shukurov, Anvar; Fletcher, Andrew; Sarson, Graeme R

    2010-01-01

    The hydrodynamic state of the interstellar medium (ISM) heated and randomly stirred by supernovae (SNe) is investigated. We use a three-dimensional non-ideal hydrodynamic ISM model in a domain extending 0.5 x 0.5 kpc horizontally and 2 kpc vertically to explore the relative importance of various physical and numerical effects on the multi-phase, turbulent ISM. We include both Type I and II SNe, the latter occurring only in dense regions. First we investigate the role of the thermal instability in the temperature range 300-6100 K, comparing results obtained for two different cooling functions, one susceptible to the instability, the other stable. The presence of thermal instability in the system is mainly visible as the tendency of the gas to avoid the relevant temperature range, as it quickly evolves towards either colder or warmer phases. Nevertheless, the formation of dense structures for both cooling functions appears to be dominated by expanding and colliding supernova remnants, rather than by the thermal...

  17. A theoretical study using the multiphase numerical simulation technique for effective use of H2 as blast furnaces fuel

    Directory of Open Access Journals (Sweden)

    Jose Adilson de Castro

    2017-07-01

    Full Text Available We present a numerical simulation procedure for analyzing hydrogen, oxygen and carbon dioxide gases injections mixed with pulverized coals within the tuyeres of blast furnaces. Effective use of H2 rich gas is highly attractive into the steelmaking blast furnace, considering the possibility of increasing the productivity and decreasing the specific emissions of carbon dioxide becoming the process less intensive in carbon utilization. However, the mixed gas and coal injection is a complex technology since significant changes on the inner temperature and gas flow patterns are expected, beyond to their effects on the chemical reactions and heat exchanges. Focusing on the evaluation of inner furnace status under such complex operation a comprehensive mathematical model has been developed using the multi interaction multiple phase theory. The BF, considered as a multiphase reactor, treats the lump solids (sinter, small coke, pellets, granular coke and iron ores, gas, liquids metal and slag and pulverized coal phases. The governing conservation equations are formulated for momentum, mass, chemical species and energy and simultaneously discretized using the numerical method of finite volumes. We verified the model with a reference operational condition using pulverized coal of 215 kg per ton of hot metal (kg thm−1. Thus, combined injections of varying concentrations of gaseous fuels with H2, O2 and CO2 are simulated with 220 kg thm−1 and 250 kg thm−1 coals injection. Theoretical analysis showed that stable operations conditions could be achieved with productivity increase of 60%. Finally, we demonstrated that the net carbon utilization per ton of hot metal decreased 12%.

  18. Effect of wellbore storage on the analysis of multiphase-flow-pressure data

    Energy Technology Data Exchange (ETDEWEB)

    Hatzignatiou, D.G. (Univ. of Alaska, Fairbanks, AK (United States)); Peres, A.M.M. (Petrobras S.A., Rio de Janeiro (Brazil)); Reynolds, A.C. (Univ. of Tulsa, OK (United States))

    1994-09-01

    This paper investigates the effect of wellbore storage on the analysis of pressure drawdown data obtained at a well producing a solution-gas-drive reservoir. Wellbore storage effects are incorporated by specifying a sandface oil flow rate that increases exponentially from zero to the specified constant value of the oil flow rate at the surface. Use of new computational equations derived here shows that effective oil permeability as a pointwise function of pressure can be computed directly from the measured values of the flowing wellbore pressure, provided the sandface oil flow rate is measured and incorporated into the analysis. If the sandface flow rate is unknown, effective permeability can be computed only after wellbore storage effects become negligible. In all cases, a semilog plot of wellbore pressure squared vs. time is shown to be a viable method for estimating effective oil permeability at initial conditions, effective oil permeability at the final flowing wellbore pressure value, and mechanical skin factor.

  19. Effects of Capillary Pressure on Multiphase Flow during CO2 Injection in Saline Aquifer

    Directory of Open Access Journals (Sweden)

    Pau J.S.

    2014-07-01

    Full Text Available This paper focused on supercritical CO2 injection into saline aquifer, in particular its capillarity’s effects on the plume migration, reservoir pressure alteration and CO2 flux density. The numerical method used to solve the incompressible two-phase flow equations is based on the mimetic method, which conserves the mass and fluxes simultaneously. The investigation showed that exclusion of capillarity can greatly underestimate the CO2 plume migration and resulted in distinctive reservoir pressure distribution. It is found that capillarity showed no significant effect on the flux intensity of CO2.

  20. Multiphase flow simulation with gravity effect in anisotropic porous media using multipoint flux approximation

    KAUST Repository

    Negara, Ardiansyah

    2015-03-04

    Numerical investigations of two-phase flows in anisotropic porous media have been conducted. In the flow model, the permeability has been considered as a full tensor and is implemented in the numerical scheme using the multipoint flux approximation within the framework of finite difference method. In addition, the experimenting pressure field approach is used to obtain the solution of the pressure field, which makes the matrix of coefficient of the global system easily constructed. A number of numerical experiments on the flow of two-phase system in two-dimensional porous medium domain are presented. In this work, the gravity is included in the model to capture the possible buoyancy-driven effects due to density differences between the two phases. Different anisotropy scenarios have been considered. From the numerical results, interesting patterns of the flow, pressure, and saturation fields emerge, which are significantly influenced by the anisotropy of the absolute permeability field. It is found that the two-phase system moves along the principal direction of anisotropy. Furthermore, the effects of anisotropy orientation on the flow rates and the cross flow index are also discussed in the paper.

  1. Multiphasic growth curve analysis.

    NARCIS (Netherlands)

    Koops, W.J.

    1986-01-01

    Application of a multiphasic growth curve is demonstrated with 4 data sets, adopted from literature. The growth curve used is a summation of n logistic growth functions. Human height growth curves of this type are known as "double logistic" (n = 2) and "triple logistic" (n = 3) growth curves (Bock

  2. Multiphasic analysis of growth.

    NARCIS (Netherlands)

    Koops, W.J.

    1989-01-01

    The central theme of this thesis is the mathematical analysis of growth in animals, based on the theory of multiphasic growth. Growth in biological terms is related to increase in size and shape. This increase is determined by internal (genetical) and external (environmental) factors. Well known mat

  3. Proceedings of submicron multiphase materials

    Energy Technology Data Exchange (ETDEWEB)

    Baney, R.; Gilliom, L.; Hirano, S.I.; Schmidt, H.

    1992-01-01

    This book contains the papers presented at Symposium R of the spring 1992 Materials Research Society meeting held in San Francisco, California. The title of the symposium, Submicron Multiphase Materials, was selected by the organizers to encompass the realm of composite materials from those smaller than conventional fiber matrix composites to those with phase separation dimensions approaching molecular dimensions. The development of composite materials is as old as the development of materials. Humans quickly learned that, by combining materials, the best properties of each can be realized and that, in fact, synergistic effects often arise. For example, chopped straw was used by the Israelites to limit cracking in bricks. The famed Japanese samurai swords were multilayers of hard oxide and tough ductile materials. One also finds in nature examples of composite materials. These range form bone to wood, consisting of a hard phase which provides strength and stiffness and a softer phase for toughness. Advanced composites are generally thought of as those which are based on a high modulus, discontinuous, chopped or woven fiber phase and a continuous polymer phase. In multiphase composites, dimensions can range from meters in materials such as steel rod-reinforced concrete structures to angstroms. In macrophase separated composite materials, properties frequently follow the rule of mixtures with the properties approximating the arithmetic mean of the properties of each individual phase, if there is good coupling between the phases. As the phases become smaller, the surface to volume ratio grows in importance with respect to properties. Interfacial and interphase phenomena being to dominate. Surface free energies play an ever increasing role in controlling properties. In recent years, much research in materials science has been directed at multiphase systems where phase separations are submicron in at least some dimension.

  4. A graphical user interface (GUI) toolkit for the calculation of three-dimensional (3D) multi-phase biological effective dose (BED) distributions including statistical analyses.

    Science.gov (United States)

    Kauweloa, Kevin I; Gutierrez, Alonso N; Stathakis, Sotirios; Papanikolaou, Niko; Mavroidis, Panayiotis

    2016-07-01

    A toolkit has been developed for calculating the 3-dimensional biological effective dose (BED) distributions in multi-phase, external beam radiotherapy treatments such as those applied in liver stereotactic body radiation therapy (SBRT) and in multi-prescription treatments. This toolkit also provides a wide range of statistical results related to dose and BED distributions. MATLAB 2010a, version 7.10 was used to create this GUI toolkit. The input data consist of the dose distribution matrices, organ contour coordinates, and treatment planning parameters from the treatment planning system (TPS). The toolkit has the capability of calculating the multi-phase BED distributions using different formulas (denoted as true and approximate). Following the calculations of the BED distributions, the dose and BED distributions can be viewed in different projections (e.g. coronal, sagittal and transverse). The different elements of this toolkit are presented and the important steps for the execution of its calculations are illustrated. The toolkit is applied on brain, head & neck and prostate cancer patients, who received primary and boost phases in order to demonstrate its capability in calculating BED distributions, as well as measuring the inaccuracy and imprecision of the approximate BED distributions. Finally, the clinical situations in which the use of the present toolkit would have a significant clinical impact are indicated.

  5. The Effect of a Reconstruction Technique and Heart Rate in the Evaluation of Optimal Trigger Delay Using Multiphase Reconstruction

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Young Jun [Konyang University School of Medicine, Daejeon (Korea, Republic of)

    2008-12-15

    To evaluate the mean optimal trigger delays and the difference between the absolute delay and the relative delay as a function of heart rate, using multiphase reconstruction. A total of 30 patients consecutively underwent a 64-slice MDCT examination. Optimal trigger delays at four planes (the bifurcation of the left main coronary artery, aortic valve, mitral valve and cardiac apex) were measured using multiphase reconstruction based on the absolute and relative delay. For this reason, patients were divided into three groups according to heart rate (group I, < 65 bpm; group II, 65-74 bpm; group III, {>=} 75 bpm), and the mean optimal trigger delays and the difference between the absolute delay and the relative delay were evaluated at the four planes for each group. The mean optimal trigger delay for the relative delay and absolute delay ranged from 46% to 66% and from 327 to 700 msec, respectively. The differences in the mean optimal trigger delay using the relative and the absolute delay at the four planes were 1% and 4 msec (group I), 3% and 27 msec (group II), and 14% and 46 msec (group III). In group III, the difference of the mean optimal trigger delay based on the relative delay, increased significantly compared to the absolute delay (p = 0.040). For the patients analyzed, the results suggest that as the heart rate increased, the mean optimal trigger delays shifted from the mid-diastolic phase to the end-systolic phase and the differences in the mean optimal trigger delay at the four planes were significantly greater for the relative delay.

  6. Multiphase forces on bend structures

    NARCIS (Netherlands)

    Nennie, E.D.; Belfroid, S.P.C.

    2016-01-01

    Piping structures are generally subjected to high dynamic loading due to multiphase forces. In particular subsea structures are very vulnerable as large flexibility is required to cope for instance with thermal stresses. The forces due to multiphase flow are characterized by a broadband spectrum wit

  7. Multiphase forces on bend structures

    NARCIS (Netherlands)

    Nennie, E.D.; Belfroid, S.P.C.

    2016-01-01

    Piping structures are generally subjected to high dynamic loading due to multiphase forces. In particular subsea structures are very vulnerable as large flexibility is required to cope for instance with thermal stresses. The forces due to multiphase flow are characterized by a broadband spectrum wit

  8. Multiphase Instabilities in Explosive Dispersal of Particles

    Science.gov (United States)

    Rollin, Bertrand; Ouellet, Frederick; Annamalai, Subramanian; Balachandar, S. ``Bala''

    2015-11-01

    Explosive dispersal of particles is a complex multiphase phenomenon that can be observed in volcanic eruptions or in engineering applications such as multiphase explosives. As the layer of particles moves outward at high speed, it undergoes complex interactions with the blast-wave structure following the reaction of the energetic material. Particularly in this work, we are interested in the multiphase flow instabilities related to Richmyer-Meshkov (RM) and Rayleigh-Taylor (RM) instabilities (in the gas phase and particulate phase), which take place as the particle layer disperses. These types of instabilities are known to depend on initial conditions for a relatively long time of their evolution. Using a Eulerian-Lagrangian approach, we study the growth of these instabilities and their dependence on initial conditions related to the particulate phase - namely, (i) particle size, (ii) initial distribution, and (iii) mass ratio (particles to explosive). Additional complexities associated with compaction of the layer of particles are avoided here by limiting the simulations to modest initial volume fraction of particles. A detailed analysis of the initial conditions and its effects on multiphase RM/RT-like instabilities in the context of an explosive dispersal of particles is presented. This work was supported by the U.S. Department of Energy, National Nuclear Security Administration, Advanced Simulation and Computing Program, as a Cooperative Agreement under the Predictive Science Academic Alliance Program, Contract No. DE-NA0002378.

  9. Multiphase Flow Dynamics 1 Fundamentals

    CERN Document Server

    Kolev, Nikolay Ivanov

    2012-01-01

    Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. In its fourth extended edition the successful monograph package “Multiphase Flow Dynmics” contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present first volume the local volume and time averaging is used to derive a complete set of conservation equations for three fluids each of them having multi components as constituents. Large parts of the book are devoted on the design of successful numerical methods for solving the...

  10. Multiphase flow dynamics 1 fundamentals

    CERN Document Server

    Kolev, Nikolay Ivanov

    2004-01-01

    Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. In its third extended edition this monograph contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present first volume the fundamentals of multiphase dynamics are provided. This third edition includes various updates, extensions and improvements in all book chapters.

  11. Multiphase flow dynamics 1 fundamentals

    CERN Document Server

    Kolev, Nikolay Ivanov

    2007-01-01

    Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. In its third extended edition this monograph contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present first volume the fundamentals of multiphase dynamics are provided. This third edition includes various updates, extensions and improvements in all book chapters.

  12. Multiphase flow dynamics 1 fundamentals

    CERN Document Server

    Kolev, Nikolay Ivanov

    2015-01-01

    In its fifth extended edition the successful monograph package “Multiphase Flow Dynamics” contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present first volume the local volume and time averaging is used to derive a complete set of conservation equations for three fluids each of them having multi components as constituents. Large parts of the book are devoted on the design of successful numerical methods for solving the obtained system of partial differential equations. Finally the analysis is repeated for boundary fitted curvilinear coordinate systems designing methods applicable for interconnected multi-blocks. This fifth edition includes various updates, extensions, improvements and corrections, as well as  a completely new chapter containing the basic physics describing the multi-phase flow in tu...

  13. Multiphase fluid hammer: modeling, experiments and simulations

    OpenAIRE

    Lema Rodríguez, Marcos

    2013-01-01

    This thesis deals with the experimental and numerical analysis of the water hammer phenomenon generated by the discharge of a pressurized liquid into a pipeline kept under vacuum conditions. This flow configuration induces several multiphase phenomena such as cavitation and gas desorption that cannot be ignored in the water hammer behavior.The motivation of this research work comes from the liquid propulsion systems used in spacecrafts, which can undergo fluid hammer effects threatening the s...

  14. The impact resistance of Kevlar woven fabrics impregnated with highly concentrated multiphase suspensions

    Institute of Scientific and Technical Information of China (English)

    Liu Jun; Xiong Dangsheng

    2016-01-01

    The stab and puncture resistance of Kevlar woven fabrics impregnated with different kinds of highly concentrated multiphase suspensions was studied with self-made dual-catheter drop-hammer tester. The results showed that the shear thickening of multiphase particles was possibly based on hydrocluster and particle jamming mechanism; the introduction of alumina silicate fibre can remarkably improve the composite spike resistance, and multiphase particles co-strengthening can provide best protection effect; otherwise, the stab resistance increases weakly.

  15. FOREWORD: International Symposium of Cavitation and Multiphase Flow (ISCM 2014)

    Science.gov (United States)

    Wu, Yulin

    2015-01-01

    multiphase flow detection Fluid-structure interaction induced by cavitation and multiphase flow Multi-scale modelling of cavitating flows and Multiphase Flow Cavitation nuclei: theory and experiments Supercavitation and its applications Synergetic effects of cavitation and silt-laden erosion Shock waves and microjets generated by cavitation Nonlinear oscillations of gas and vapour bubbles Fundamentals of physics of acoustic cavitation Sonochemistry and sonoluminescence Biomedical applications of cavitation effects Ultrasonic cavitation for molten metal treatment Cavitation for enhanced heat transfer The ISCM 2014 brought together 95 scientists, researchers and graduate students from 11 countries, affiliated with universities, technology centers and industrial firms to debate topics related to advanced technologies for cavitation and Multiphase Flow, which would enhance the sustainable development of cavitation and Multiphase Flow in interdisciplinary sciences and technology. The technical committee selected 54 technical papers on the following topics: (i) Hydrodynamic Cavitation, (ii) Super Cavitation, (iii) Pump Cavitation, (iv) Acoustic Cavitation, (v) Interdisciplinary Research of Cavitation and Multi-Phase Flows, and 13 invited plenary and invited forum lectures, which were presented at the symposium, to be included in the proceedings. All the papers of ISCM 2014, which are published in this Volume of IOP Conference Series: Materials Science and Engineering, had been peer reviewed through processes administered by the editors of the ISCM 2014, those are Yulin WU, Shouqi YUAN, Zhengwei WANG, Shuhong LIU, Xingqi LUO, Fujun WANG and Guoyu WANG. The papers published in this Volume include 54 technical papers and 3 full length texts of the invited lectures. We sincerely hope that the International Symposium on Cavitation and Multiphase Flow is a significant step forward in the world wide efforts to address the present challenges in the modern science and technology. Professor

  16. Effect of heat treatment on formability in 0.15C-1.5Si-1.5Mn multiphase cold-rolled steel sheet

    Science.gov (United States)

    Lee, Chang Gil; Kim, Sung-Joon; Song, Byung-Hwan; Lee, Sunghak

    2002-10-01

    The effects of volume fraction and the stability of retained austenite on the formability of a 0.15C-1.5Si-1.5Mn (hereafter all in wt.%) TRIP-aided multiphase cold-rolled steel sheet were investigated after various heat treatments. The steel sheets were intercritically annealed at 800°C, and isothermally treated at 400°C and 430°C. Microstructural observation, tensile tests and limiting dome height (LDH) tests were conducted on the heat-treated sheet specimens, and the changes in retained austenite volume fraction as a function of tensile strain were measured using an X-ray diffractometer. The results showed a plausible relationship between formability and retained austenite stability. Although the same amount of retained austenite was obtained after isothermal holding at different temperatures, better formability was obtained in the specimens with the higher stability of retained austenite. If the stability of the retained austenite is high, the strain-induced transformation of retained austenite to martensite can be stably progressed, resulting in a delay of necking to the high strain region and improvement in formability.

  17. Effect of Tb2O3 additive on structure of anatase and photocatalytic activity of TiO2/(O'+β')-Sialon multi-phase ceramics

    Institute of Scientific and Technical Information of China (English)

    YANG Jian; PAN Limei; XUE Xiangxin; WANG Mei; QIU Tai

    2009-01-01

    Effect of rare earth oxide Tb2O3 additive on transformation behavior and grain growth of anatase and photocatalytic activity for TiO2/(O'+β')-Sialon multi-phase ceramic was investigated and the mechanism was discussed. X-ray diffractometer (XRD) was employed for the analysis of phase composition, grain size and lattice parameters of anatase. Photocatalyfic activity of the composites was investigated through its photocatalytic degradation to methylene blue (MB) solution. The results showed that Tb2O3 significantly inhibited the transfor-marion process, which displayed an appreciably intensified effect with increasing Tb203 content. It could be attributed to the coaction of the active and passive influence mechanisms. For Tb3+ entering TiO2 lattice, replacing Ti4+ accelerated the transformation, whereas the lattice distortion caused by it was unfavorable for the process. On the other hand, the redox reaction between Tb3+ and TiO2 as well as the Tb2O3 deposited on the surface of TiO2 inhibited the transformation. The addition of Tb2O3 effectively restrained the grain growth of TiO2 and the effect became significant with the increase of its content. With the increase of Tb2O3 addition, the photocatalytic activity of the catalysts in-creased and then dropped after reaching the maximum at about 2%. The action mechanism of Tb2O3 could be attributed to its optical proper-ties and its effect on phase transformation, grain growth and crystal structure of TiO2.

  18. Multisensor Acquirement System of Electrokinetic in Multiphase Flow

    Directory of Open Access Journals (Sweden)

    Yahui Bu

    2013-09-01

    Full Text Available Streaming potential is one kind of electrokinetic effect coupled with fluid flow in porous media, and it has the ability to evaluate properties of rock and fluid in reservoirs. Geophysicists are much concerned about its application in geophysical survey, especially to monitor multiphase flow which is widespread in petroleum industry. To study the electrokinetic effect during multiphase flow, it is necessary to collect electrical and hydraulic parameters in real time. So we designed an acquisition system of multisensors (pressure, flow rate, electrical potential and resistivity, which could conduct measurement process automatically, introduced noise reduction algorithm to the primary analog signals. Data and control command were transmitted in network based on TCP/IP protocol and USB converter. Result from an water-oil displacement experiment showed that this system can effectively and rightly monitor the state of electrokinetic process during multiphase flow

  19. Flip-Flops for accurate multiphase clocking: transmission gate versus current mode logic

    NARCIS (Netherlands)

    Dutta, R.; Klumperink, Eric A.M.; Gao, X.; Ru, Z.; van der Zee, Ronan A.R.; Nauta, Bram

    2013-01-01

    Dynamic transmission gate (DTG) flip-flops (FFs) (DTG-FFs) and current mode logic (CML) FFs (CML-FFs) are compared targeting power efficient multiphase clock generation with low phase error. The effect of component mismatches on multiphase clock timing inaccuracies is modeled and compared, using the

  20. Flip-Flops for accurate multiphase clocking: transmission gate versus current mode logic

    NARCIS (Netherlands)

    Dutta, R.; Klumperink, E.A.M.; Gao, X.; Ru, Z.; Zee, van der R.A.R.; Nauta, B.

    2013-01-01

    Dynamic transmission gate (DTG) flip-flops (FFs) (DTG-FFs) and current mode logic (CML) FFs (CML-FFs) are compared targeting power efficient multiphase clock generation with low phase error. The effect of component mismatches on multiphase clock timing inaccuracies is modeled and compared, using the

  1. Multiphase Flow Dynamics 2 Mechanical Interactions

    CERN Document Server

    Kolev, Nikolay Ivanov

    2012-01-01

    Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. .In its fourth extended edition the successful monograph package “Multiphase Flow Daynmics” contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present second volume the methods for describing the mechanical interactions in multiphase dynamics are provided. This fourth edition includes various updates, extensions, improvements and corrections.   "The literature in the field of multiphase flows is numerous. Therefore, it i...

  2. Viscous and gravitational fingering in multiphase compositional and compressible flow

    Science.gov (United States)

    Moortgat, Joachim

    2016-03-01

    Viscous and gravitational fingering refer to flow instabilities in porous media that are triggered by adverse mobility or density ratios, respectively. These instabilities have been studied extensively in the past for (1) single-phase flow (e.g., contaminant transport in groundwater, first-contact-miscible displacement of oil by gas in hydrocarbon production), and (2) multi-phase immiscible and incompressible flow (e.g., water-alternating-gas (WAG) injection in oil reservoirs). Fingering in multiphase compositional and compressible flow has received much less attention, perhaps due to its high computational complexity. However, many important subsurface processes involve multiple phases that exchange species. Examples are carbon sequestration in saline aquifers and enhanced oil recovery (EOR) by gas or WAG injection below the minimum miscibility pressure. In multiphase flow, relative permeabilities affect the mobility contrast for a given viscosity ratio. Phase behavior can also change local fluid properties, which can either enhance or mitigate viscous and gravitational instabilities. This work presents a detailed study of fingering behavior in compositional multiphase flow in two and three dimensions and considers the effects of (1) Fickian diffusion, (2) mechanical dispersion, (3) flow rates, (4) domain size and geometry, (5) formation heterogeneities, (6) gravity, and (7) relative permeabilities. Results show that fingering in compositional multiphase flow is profoundly different from miscible conditions and upscaling techniques used for the latter case are unlikely to be generalizable to the former.

  3. Inverse probability weighting to estimate causal effect of a singular phase in a multiphase randomized clinical trial for multiple myeloma

    Directory of Open Access Journals (Sweden)

    Annalisa Pezzi

    2016-11-01

    Full Text Available Abstract Background Randomization procedure in randomized controlled trials (RCTs permits an unbiased estimation of causal effects. However, in clinical practice, differential compliance between arms may cause a strong violation of randomization balance and biased treatment effect among those who comply. We evaluated the effect of the consolidation phase on disease-free survival of patients with multiple myeloma in an RCT designed for another purpose, adjusting for potential selection bias due to different compliance to previous treatment phases. Methods We computed two propensity scores (PS to model two different selection processes: the first to undergo autologous stem cell transplantation, the second to begin consolidation therapy. Combined stabilized inverse probability treatment weights were then introduced in the Cox model to estimate the causal effect of consolidation therapy miming an ad hoc RCT protocol. Results We found that the effect of consolidation therapy was restricted to the first 18 months of the phase (HR: 0.40, robust 95 % CI: 0.17-0.96, after which it disappeared. Conclusions PS-based methods could be a complementary approach within an RCT context to evaluate the effect of the last phase of a complex therapeutic strategy, adjusting for potential selection bias caused by different compliance to the previous phases of the therapeutic scheme, in order to simulate an ad hoc randomization procedure. Trial registration ClinicalTrials.gov: NCT01134484 May 28, 2010 (retrospectively registered EudraCT: 2005-003723-39 December 17, 2008 (retrospectively registered

  4. Investigation on the gas pockets in a rotodynamic multiphase pump

    Science.gov (United States)

    Zhang, J. Y.; Li, Y. J.; Cai, S. J.; Zhu, H. W.; Zhang, Y. X.

    2016-05-01

    The appearance of gas pockets has an obvious impact on the performance of the rotodynamic multiphase pump. In order to study the formation of gas pockets in the pump and its effects on pump's performance, the unsteady numerical simulation and the visualization experiments were done to investigate gas pockets in a three-stage rotodynamic multiphase pump developed by authors. Meanwhile, the mixture of water and air was selected as the medium. According to the distributions of pressure, gas volume fraction and velocity vector in three compression cells in unsteady flow process, the process of the formation of gas pockets in the pump were analysed generally. The visualization experiments were used to verify the validity of the numerical simulation. The results will be benefit for the hydraulic design of the compression cell of rotodynamic multiphase pump.

  5. Toughening and strengthening mechanism of zirconia-alumina multiphase ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Yu, M.Q.; Fan, S.G. [Research Inst. of Synthetic Crystals, Beijing, BJ (China); Shen, Q.; Zhang, L.M. [Wuhan Univ. of Technology (China)

    2003-07-01

    In the present study, the effect of compositions on the mechanical properties of zirconia-alumina multiphase ceramics was studied. The results showed that with the variety of ZrO{sub 2} content, the change of bending strength and fracture toughness of the multiphase ceramics exhibited a saddle shape which could be divided into three zones: ZTA, ADZ, and Transition zone. The mechanism of toughening and strengthening in each zone was mainly analyzed, and it was found that stress-induced transformation toughening of ZrO{sub 2} and dispersion strengthening of Al{sub 2}O{sub 3} were the two main factors. (orig.)

  6. CFD Modeling of a Multiphase Gravity Separator Vessel

    KAUST Repository

    Narayan, Gautham

    2017-05-23

    The poster highlights a CFD study that incorporates a combined Eulerian multi-fluid multiphase and a Population Balance Model (PBM) to study the flow inside a typical multiphase gravity separator vessel (GSV) found in oil and gas industry. The simulations were performed using Ansys Fluent CFD package running on KAUST supercomputer, Shaheen. Also, a highlight of a scalability study is presented. The effect of I/O bottlenecks and using Hierarchical Data Format (HDF5) for collective and independent parallel reading of case file is presented. This work is an outcome of a research collaboration on an Aramco project on Shaheen.

  7. Achieving a table-like magnetocaloric effect and large refrigerant capacity in in situ multiphase Gd65Mn25Si10 alloys obtained by crystallization treatment

    Science.gov (United States)

    Shen, X. Y.; Zhong, X. C.; Huang, X. W.; Mo, H. Y.; Feng, X. L.; Liu, Z. W.; Jiao, D. L.

    2017-01-01

    In situ multiphase structure Gd65Mn25Si10 alloys were fabricated by melt spinning and subsequent crystallization treatment. In the process of crystallization, the α-Gd, GdMn2 and Gd5Si3 phases precipitate in the amorphous matrix in turn. The Curie temperature (T C) values for the α-Gd crystallization phase and amorphous matrix can be tailored by tuning the crystallization treatment time. All three multiphase alloys obtained by crystallization treatment at 637 K for 20, 30 and 40 min, respectively, undergo multiple successive magnetic phase transitions. A table-like magnetic entropy change over a wide temperature range (~90-120 K) and a large full width at half maximum (ΔT FWHM) magnetic entropy change (~230 K) were achieved in the above-mentioned crystallized alloys, resulting in large refrigerant capacities (RCs). The enhanced RCs of the three crystallized alloys for a magnetic field change of 0-5 T are in the range of 541-614 J kg-1. Large ΔT FWHM and RC values and a table-like (-ΔS M)max feature obtained in in situ multiphase Gd65Mn25Si10 crystallized alloys make them suitable for potential application in efficient Ericsson-cycle magnetic refrigeration working in a temperature range from 74 to 310 K.

  8. Dual/multiphase MWCNT-antimony-doped tin oxide (ATO) nanoparticle composites: an effective covalent fabrication approach

    Science.gov (United States)

    Harel, Yifat; Lellouche, Jean-Paul

    2014-08-01

    Three innovative preparation pathways for antimony-doped tin oxide (ATO)-multi-walled carbon nanotube (MWCNT) composites have been successfully tested. The designed covalent mode of attachment of both phases, i.e., 10-20 nm-sized ATO nanoparticles (NPs) onto 10-50-μm-long oxidized-MWCNTs (Ox-MWCNTs) and onto polythiophene-MWCNTs (PolyTh-MWCNTs) enabled the preparation of biphasic and triphasic composites, respectively. Triphasic composites made use of poly(thiophene-3-yl-acetic acid) or poly-3,4-ethylenedioxythiophene carboxylic acid polymers covalently grown/grafted onto Ox-MWCNTs, disclosing an outer polyCOOH shell available for later chemical manipulations. The whole set of resulting bi/triphasic ATO-decorated MWCNT composites have been fully analyzed for structural and morphology coherency with emphasis on both quantity and distribution of ATO NPs onto the MWCNT surface. In general, connecting polyTh polymeric phases improved ATO NP dissemination within composites. Moreover, the influence of such polyTh phases on the solid phase conductivity of resulting composites before and after heat sintering (350 °C, 3 h) has been readily investigated using an effective Powder Resistivity Measuring System. Such studies and relevant outputs clearly form a serious basis toward the development of various conductivity-relating applications and/or devices.

  9. Numerical Solver for Multiphase Flows

    OpenAIRE

    Sousa, Victor C B; Scalo, Carlo

    2015-01-01

    The technological development of micro-scale electronic devices is bounded by the challenge of dissipating their heat output. Latent heat absorbed by a fluid during phase transition offers exceptional cooling capabilities while allowing for the design of compact heat exchangers. The understanding of heat transport dynamics in the context of multiphase flow physics is hampered by the limited access to detailed flow features offered by experimental measurements. Computational Fluid Dynamics (CF...

  10. Study of retained austenite and nano-scale precipitation and their effects on properties of a low alloyed multi-phase steel by the two-step intercritical treatment

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Z.J.; Han, G., E-mail: hangang@mater.ustb.edu.cn; Zhou, W.H.; Zeng, C.Y.; Shang, C.J., E-mail: cjshang@ustb.edu.cn

    2016-03-15

    Microstructure evolution and properties were studied in a low carbon low alloyed hot-rolled bainitic steel by annealing and annealing plus tempering. Microstructure of the hot-rolled steel consists of lath bainite and martensite. By annealing at 720 °C for 30 min and water quenching, multi-phase microstructure consisting of intercritical ferrite, tempered bainite/martensite, retained austenite and fresh martensite was obtained. With increasing annealing temperature to 760 °C, microstructure of the steel consisted of intercritical ferrite, fresh martensite without retained austenite. After the second step of tempering at 680 °C for samples annealed both at 720 °C and 760 °C, ~ 8–9% volume fraction of retained austenite was obtained in the multi-phase microstructure. Moreover, fine precipitates of VC with size smaller than 10 nm and copper precipitates with size of ~ 10–50 nm were obtained after tempering. Results from scanning transmission electron microscopy (STEM) give evidence to support that the partitioning of Mn, Ni and Cu is of significance for retained austenite stabilization. Due to the combined contribution of multiphase microstructure, the transformation-induced-plasticity effect of retained austenite and strengthening effect of nanometer-sized precipitates, yield strength greater than 800 MPa, yield to tensile ratio of 0.9, uniform elongation of ~ 9% and good low temperature impact toughness of 147 J at − 40 °C were achieved. - Highlights: • Stable retained austenite was produced in a low alloyed steel. • Partition of Mn, Ni and Cu was confirmed by STEM for austenite stabilization. • Nano-sized VC and Cu precipitates were achieved by second tempering. • High strength–high toughness with low Y/T ratio was obtained.

  11. Multiphase Flow Dynamics 3 Thermal Interactions

    CERN Document Server

    Kolev, Nikolay Ivanov

    2012-01-01

    Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. .In its fourth extended edition the successful monograph package “Multiphase Flow Daynmics” contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present third volume methods for describing of the thermal interactions in multiphase dynamics are provided. In addition a large number of valuable experiments is collected and predicted using the methods introduced in this monograph. In this way the accuracy of the methods is reve...

  12. Probabilistic events in shock driven multiphase hydrodynamic instabilities

    Science.gov (United States)

    Black, Wolfgang; Denissen, Nick; McFarland, Jacob

    2016-11-01

    Multiphase flows are an important and complex topic of research with a rich parameter space. Historically many simplifications and assumptions have been made to allow simulation techniques to be applied to these systems. Some common assumptions include no partilce-particle effects, evenly distributed particle fields, no phase change, or even constant particle radii. For some flows, these assumptions may be applicable but as the systems undergo complex accelerations and eventually become turbulent these multiphase parameters can create significant effects. Through the use of FLAG, a multiphysics hydrodynamics code developed at Los Alamos national laboratory, these assumptions can be relaxed or eliminated to increase fidelity and guide the development of experiments. This talk will build on our previous work utilizing simulations on the shock driven multiphase instability with a new investigation into a greater parameter space provided by additional multiphase effects; including a probabilistic particle field, various particle radii, and particle-particle effects on the evolution of commonly studied interfaces. Los Alamos National Laboratory LA-UR-16-25652.

  13. Multiphase flow analysis using population balance modeling bubbles, drops and particles

    CERN Document Server

    Yeoh, Guan Heng; Tu, Jiyuan

    2013-01-01

    Written by leading multiphase flow and CFD experts, this book enables engineers and researchers to understand the use of PBM and CFD frameworks. Population balance approaches can now be used in conjunction with CFD, effectively driving more efficient and effective multiphase flow processes. Engineers familiar with standard CFD software, including ANSYS-CFX and ANSYS-Fluent, will be able to use the tools and approaches presented in this book in the effective research, modeling and control of multiphase flow problems. Builds a complete understanding of the theory behind the

  14. Problems of multiphase fluid filtration

    CERN Document Server

    Konovalov, AN

    1994-01-01

    This book deals with a spectrum of problems related to the mathematical modeling of multiphase filtration. Emphasis is placed on an inseparable triad: model - algorithm - computer code. An analysis of new and traditional filtration problems from the point of view of both their numerical implementation and the reproduction of one or another technological characteristics of the processes under consideration is given. The basic principles which underlie the construction of efficient numerical methods taking into account the filtration problems are discussed: non-evolutionary nature, degeneration,

  15. Germanium multiphase equation of state

    Science.gov (United States)

    Crockett, S. D.; De Lorenzi-Venneri, G.; Kress, J. D.; Rudin, S. P.

    2014-05-01

    A new SESAME multiphase germanium equation of state (EOS) has been developed utilizing the best available experimental data and density functional theory (DFT) calculations. The equilibrium EOS includes the Ge I (diamond), the Ge II (β-Sn) and the liquid phases. The foundation of the EOS is based on density functional theory calculations which are used to determine the cold curve and the Debye temperature. Results are compared to Hugoniot data through the solid-solid and solid-liquid transitions. We propose some experiments to better understand the dynamics of this element.

  16. Multiphase composites with extremal bulk modulus

    DEFF Research Database (Denmark)

    Gibiansky, L. V.; Sigmund, Ole

    2000-01-01

    This paper is devoted to the analytical and numerical study of isotropic elastic composites made of three or more isotropic phases. The ranges of their effective bulk and shear moduli are restricted by the Hashin-Shtrikman-Walpole (HSW) bounds. For two-phase composites, these bounds are attainable......, that is, there exist composites with extreme bulk and shear moduli. For multiphase composites, they may or may not be attainable depending on phase moduli and volume fractions. Sufficient conditions of attainability of the bounds and various previously known and new types of optimal composites...... are described. Most of our new results are related to the two-dimensional problem. A numerical topology optimization procedure that solves the inverse homogenization problem is adopted and used to look for two-dimensional three-phase composites with a maximal effective bulk modulus. For the combination...

  17. 杂质预处理方式对复相磷石膏水化特性的影响%Effect of pretreatment methods of impurities on the hydration property of multiphase phosphogypsum

    Institute of Scientific and Technical Information of China (English)

    孙清臣; 杨敏; 杨成军

    2014-01-01

    The calcined multiphase phosphogypsum was produced with phosphogypsum, which was pretreated using the methods of washing, neutralizing with quick lime, floating. and the effectiveness, problems and feasibility of pretreatment are analyzed. The results showed that Lime treatment is best pretreatment to produce multiphase phosphogypsum, flexural and compressive strength of which was 4.65MPa and 14.9MPa separately.%通过水洗、浮选和石灰中和三种方式对磷石膏进行了预处理。将预处理磷石膏煅烧成复相磷石膏,测试不同预处理方式对复相磷石膏水化性能的影响。结果表明:石灰中和磷石膏制备的复相磷石膏水化后晶体结构较好,抗折、抗压强度分别达到4.65MPa、14.9MPa。

  18. Multiphase flows in confinement with complex geometries

    Science.gov (United States)

    Aymard, Benjamin; Pradas, Marc; Vaes, Urbain; Kalliadasis, Serafim

    2016-11-01

    Understanding the dynamics of immiscible fluids in confinement is crucial in numerous applications such as oil recovery, fuel cells and the rapidly growing field of microfluidics. Complexities such as microstructures, chemical-topographical heterogeneities or porous membranes, can often induce non-trivial effects such as critical phenomena and phase transitions . The dynamics of confined multiphase flows may be efficiently described using diffuse-interface theory, leading to the Cahn-Hilliard-Navier-Stokes(CHNS) equations with Cahn wetting boundary conditions. Here we outline an efficient numerical method to solve the CHNS equations using advanced geometry-capturing mesh techniques both in two and three dimensional scenarios. The methodology is applied to two different systems: a droplet on a spatially chemical-topographical heterogeneous substrateand a microfluidic separator.

  19. Is hepatotropic contrast enhanced MR a more effective method in differential diagnosis of hemangioma than multi-phase CT and unenhanced MR?

    Science.gov (United States)

    2011-01-01

    Background Cavernous hemangiomas are the most frequent neoplasms of the liver and in routine clinical practice they often need to be differentiated from malignant tumors and other benign focal lesions. The purpose of this study is to evaluate whether diagnostic accuracy of magnetic resonance imaging (MRI) of hepatic hemangiomas, showing atypical pattern on US, improves with the use of Gd-BOPTA in comparison with contrast-enhanced multi-phase computed tomography (CT). Methods 178 consecutive patients with ambiguous hepatic masses showing atypical hyperechoic pattern on grey-scale US, underwent unenhanced and contrast-enhanced multi-phase multi-detector CT and MR (1.5T) with the use of liver-specific contrast medium gadobenate dimeglumine (Gd-BOPTA). After intravenous contrast administration arterial (HAP), venous-portal (PVP), equilibrium phases (EP) both in CT and MR and additionally hepatobiliary phase (HBP) in MR were obtained. 398 lesions have been detected including 99 hemangiomas and 299 other lesions. Results In non-enhanced MDCT examination detection of hemangiomas was characterized by sensitivity of 76%, specificity of 90%, PPV of 71%, NPV of 92% and accuracy of 86%. Non-enhanced MR examination showed sensitivity of 98%, specificity of 99%, PPV of 99%, NPV of 99% and accuracy of 99%. After intravenous administration of contrast medium in MR the mentioned above parameters did not increase significantly. Conclusion Gd-BOPTA-enhanced MR in comparison with unenhanced MRI does not improve diagnostic accuracy in discriminating hemangiomas that show non-specific appearance in ultrasound examination. Unenhanced MR as a method of choice should directly follow US in course of diagnostic algorithm in differentiation of hemangiomas from other liver tumors. PMID:21504593

  20. Contact Angle Effects on Pore and Corner Arc Menisci in Polygonal Capillary Tubes Studied with the Pseudopotential Multiphase Lattice Boltzmann Model

    Directory of Open Access Journals (Sweden)

    Soyoun Son

    2016-02-01

    Full Text Available In porous media, pore geometry and wettability are determinant factors for capillary flow in drainage or imbibition. Pores are often considered as cylindrical tubes in analytical or computational studies. Such simplification prevents the capture of phenomena occurring in pore corners. Considering the corners of pores is crucial to realistically study capillary flow and to accurately estimate liquid distribution, degree of saturation and dynamic liquid behavior in pores and in porous media. In this study, capillary flow in polygonal tubes is studied with the Shan-Chen pseudopotential multiphase lattice Boltzmann model (LBM. The LB model is first validated through a contact angle test and a capillary intrusion test. Then capillary rise in square and triangular tubes is simulated and the pore meniscus height is investigated as a function of contact angle θ. Also, the occurrence of fluid in the tube corners, referred to as corner arc menisci, is studied in terms of curvature versus degree of saturation. In polygonal capillary tubes, the number of sides leads to a critical contact angle θc which is known as a key parameter for the existence of the two configurations. LBM succeeds in simulating the formation of a pore meniscus at θ > θc or the occurrence of corner arc menisci at θ < θc. The curvature of corner arc menisci is known to decrease with increasing saturation and decreasing contact angle as described by the Mayer and Stoewe-Princen (MS-P theory. We obtain simulation results that are in good qualitative and quantitative agreement with the analytical solutions in terms of height of pore meniscus versus contact angle and curvature of corner arc menisci versus saturation degree. LBM is a suitable and promising tool for a better understanding of the complicated phenomena of multiphase flow in porous media.

  1. Multiphase CT scanning and different intravenous contrast media concentrations in combined F-18-FDG PET/CT: Effect on quantitative and clinical assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rebiere, Marilou, E-mail: Marilou.Rebiere@rwth-aachen.de [Department of Nuclear Medicine, University Hospital RWTH Aachen, Pauwelsstrasse 30, 52057 Aachen (Germany); Verburg, Frederik A., E-mail: fverburg@ukaachen.de [Department of Nuclear Medicine, University Hospital RWTH Aachen, Pauwelsstrasse 30, 52057 Aachen (Germany); Department of Nuclear Medicine, Maastricht University Medical Center, P. Debeylaan 25, 6202 AZ Maastricht (Netherlands); Palmowski, Moritz, E-mail: mpalmowski@ukaachen.de [Department of Nuclear Medicine, University Hospital RWTH Aachen, Pauwelsstrasse 30, 52057 Aachen (Germany); Department of Radiology, University Hospital RWTH Aachen, Pauwelsstrasse 30, 52057 Aachen (Germany); Department of Experimental Molecular Imaging, University Hospital RWTH Aachen, Pauwelsstrasse 30, 52057 Aachen (Germany); Krohn, Thomas, E-mail: tkrohn@ukaachen.de [Department of Nuclear Medicine, University Hospital RWTH Aachen, Pauwelsstrasse 30, 52057 Aachen (Germany); Pietsch, Hubertus, E-mail: hubertus.pietsch@bayer.com [Contrast Media Research, Bayer Pharma AG, Muellerstr. 178, 13353 Berlin (Germany); Kuhl, Christiane K., E-mail: ckuhl@ukaachen.de [Department of Radiology, University Hospital RWTH Aachen, Pauwelsstrasse 30, 52057 Aachen (Germany); Mottaghy, Felix M., E-mail: fmottaghy@ukaachen.de [Department of Nuclear Medicine, University Hospital RWTH Aachen, Pauwelsstrasse 30, 52057 Aachen (Germany); Department of Nuclear Medicine, Maastricht University Medical Center, P. Debeylaan 25, 6202 AZ Maastricht (Netherlands); Behrendt, Florian F., E-mail: fbehrendt@ukaachen.de [Department of Nuclear Medicine, University Hospital RWTH Aachen, Pauwelsstrasse 30, 52057 Aachen (Germany)

    2012-08-15

    Purpose: To evaluate the influence of multiphase CT scanning and different intravenous contrast media on contrast enhancement, attenuation correction and image quality in combined PET/CT. Material and methods: 140 patients were prospectively enrolled for F-18-FDG-PET/CT including a low-dose unenhanced, arterial and venous contrast enhanced CT. The first (second) 70 patients, received contrast medium with 370 (300) mg iodine/ml. The iodine delivery rate (1.3 mg/s) and total iodine load (44.4 g) were identical for both groups. Contrast enhancement and maximum and mean standardized FDG uptake values (SUVmax and SUVmean) were determined for the un-enhanced, arterial and venous PET/CT at multiple anatomic sites and PET reconstructions were visually evaluated. Results: Arterial contrast enhancement was significantly higher for the 300 mg/ml contrast medium compared to 370 mg I/ml at all anatomic sites. Venous enhancement was not different between the two contrast media. SUVmean and SUVmax were significantly higher for the contrast enhanced compared to the non-enhanced PET/CT at all anatomic sites (all P < 0.001). Tracer uptake was significantly higher in the arterial than in the venous PET/CT in the arteries using both contrast media (all P < 0.001). No differences in tracer uptake were found between the contrast media (all P > 0.05). Visual assessment revealed no relevant differences between the different PET reconstructions. Conclusions: There is no relevant qualitative influence on the PET scan from the use of different intravenous contrast media in its various phases in combined multiphase PET/CT. For quantitative analysis of tracer uptake it is required to use an identical PET/CT protocol.

  2. Is hepatotropic contrast enhanced MR a more effective method in differential diagnosis of hemangioma than multi-phase CT and unenhanced MR?

    Directory of Open Access Journals (Sweden)

    Markiet Karolina

    2011-04-01

    Full Text Available Abstract Background Cavernous hemangiomas are the most frequent neoplasms of the liver and in routine clinical practice they often need to be differentiated from malignant tumors and other benign focal lesions. The purpose of this study is to evaluate whether diagnostic accuracy of magnetic resonance imaging (MRI of hepatic hemangiomas, showing atypical pattern on US, improves with the use of Gd-BOPTA in comparison with contrast-enhanced multi-phase computed tomography (CT. Methods 178 consecutive patients with ambiguous hepatic masses showing atypical hyperechoic pattern on grey-scale US, underwent unenhanced and contrast-enhanced multi-phase multi-detector CT and MR (1.5T with the use of liver-specific contrast medium gadobenate dimeglumine (Gd-BOPTA. After intravenous contrast administration arterial (HAP, venous-portal (PVP, equilibrium phases (EP both in CT and MR and additionally hepatobiliary phase (HBP in MR were obtained. 398 lesions have been detected including 99 hemangiomas and 299 other lesions. Results In non-enhanced MDCT examination detection of hemangiomas was characterized by sensitivity of 76%, specificity of 90%, PPV of 71%, NPV of 92% and accuracy of 86%. Non-enhanced MR examination showed sensitivity of 98%, specificity of 99%, PPV of 99%, NPV of 99% and accuracy of 99%. After intravenous administration of contrast medium in MR the mentioned above parameters did not increase significantly. Conclusion Gd-BOPTA-enhanced MR in comparison with unenhanced MRI does not improve diagnostic accuracy in discriminating hemangiomas that show non-specific appearance in ultrasound examination. Unenhanced MR as a method of choice should directly follow US in course of diagnostic algorithm in differentiation of hemangiomas from other liver tumors.

  3. Frontiers and progress in multiphase flow

    CERN Document Server

    2014-01-01

    This volume presents state-of-the-art of reviews in the field of multiphase flow. In focusses on nonlinear aspects of multiphase flow networks as well as visualization experiments. The first chapter presents nonlinear aspects or deterministic chaos issues in the systems of multi-phase reactors.  The second chapter reviews two-phase flow dynamics in combination with complex network theory. The third chapter discusses evaporation mechanism in the wick of copper heat pipes. The last chapter investigates numerically the flow dynamics and heat and mass transfer in the laminar and turbulent boundary layer on the flat vertical plate.

  4. Multiphase lattice Boltzmann methods theory and application

    CERN Document Server

    Huang, Haibo; Lu, Xiyun

    2015-01-01

    Theory and Application of Multiphase Lattice Boltzmann Methods presents a comprehensive review of all popular multiphase Lattice Boltzmann Methods developed thus far and is aimed at researchers and practitioners within relevant Earth Science disciplines as well as Petroleum, Chemical, Mechanical and Geological Engineering. Clearly structured throughout, this book will be an invaluable reference  on the current state of all popular multiphase Lattice Boltzmann Methods (LBMs). The advantages and disadvantages of each model are presented in an accessible manner to enable the reader to choose the

  5. On multiphase negative flash for ideal solutions

    DEFF Research Database (Denmark)

    Yan, Wei; Stenby, Erling Halfdan

    2012-01-01

    coefficients. It is shown that this inner loop, named here as multiphase negative flash for ideal solutions, can be solved either by Michelsen's algorithm for multiphase normal flash, or by its variation which uses F−1 phase amounts as independent variables. In either case, the resulting algorithm is actually...... simpler than the corresponding normal flash algorithm. Unlike normal flash, multiphase negative flash for ideal solutions can diverge if the feasible domain for phase amounts is not closed. This can be judged readily during the iteration process. The algorithm can also be extended to the partial negative...

  6. Massively Parallel Direct Simulation of Multiphase Flow

    Energy Technology Data Exchange (ETDEWEB)

    COOK,BENJAMIN K.; PREECE,DALE S.; WILLIAMS,J.R.

    2000-08-10

    The authors understanding of multiphase physics and the associated predictive capability for multi-phase systems are severely limited by current continuum modeling methods and experimental approaches. This research will deliver an unprecedented modeling capability to directly simulate three-dimensional multi-phase systems at the particle-scale. The model solves the fully coupled equations of motion governing the fluid phase and the individual particles comprising the solid phase using a newly discovered, highly efficient coupled numerical method based on the discrete-element method and the Lattice-Boltzmann method. A massively parallel implementation will enable the solution of large, physically realistic systems.

  7. Reactive multiphase flow simulation workshop summary

    Energy Technology Data Exchange (ETDEWEB)

    VanderHeyden, W.B.

    1995-09-01

    A workshop on computer simulation of reactive multiphase flow was held on May 18 and 19, 1995 in the Computational Testbed for Industry at Los Alamos National Laboratory (LANL), Los Alamos, New Mexico. Approximately 35 to 40 people attended the workshop. This included 21 participants from 12 companies representing the petroleum, chemical, environmental and consumer products industries, two representatives from the DOE Office of Industrial Technologies and several from Los Alamos. The dialog at the meeting suggested that reactive multiphase flow simulation represents an excellent candidate for government/industry/academia collaborative research. A white paper on a potential consortium for reactive multiphase flow with input from workshop participants will be issued separately.

  8. Simulation of multiphase flow in hydrocyclone

    Directory of Open Access Journals (Sweden)

    Rudolf P.

    2013-04-01

    Full Text Available Multiphase gas-liquid-solid swirling flow within hydrocyclone is simulated. Geometry and boundary conditions are based on Hsieh's 75 mm hydrocyclone. Extensive simulations point that standard mixture model with careful selection of interphase drag law is suitable for correct prediction of particle classification in case of dilute suspensions. However this approach fails for higher mass loading. It is also confirmed that Reynolds stress model is the best choice for multiphase modeling of the swirling flow on relatively coarse grids.

  9. Simulation of multiphase flow in hydrocyclone

    Science.gov (United States)

    Rudolf, P.

    2013-04-01

    Multiphase gas-liquid-solid swirling flow within hydrocyclone is simulated. Geometry and boundary conditions are based on Hsieh's 75 mm hydrocyclone. Extensive simulations point that standard mixture model with careful selection of interphase drag law is suitable for correct prediction of particle classification in case of dilute suspensions. However this approach fails for higher mass loading. It is also confirmed that Reynolds stress model is the best choice for multiphase modeling of the swirling flow on relatively coarse grids.

  10. Simulation of multiphase flow in hydrocyclone

    OpenAIRE

    Rudolf P.

    2013-01-01

    Multiphase gas-liquid-solid swirling flow within hydrocyclone is simulated. Geometry and boundary conditions are based on Hsieh's 75 mm hydrocyclone. Extensive simulations point that standard mixture model with careful selection of interphase drag law is suitable for correct prediction of particle classification in case of dilute suspensions. However this approach fails for higher mass loading. It is also confirmed that Reynolds stress model is the best choice for multiphase modeling of the s...

  11. Effectiveness of organoclays as compatibilizers for multiphase polymer blends - A sustainable route for the mechanical recycling of co-mingled plastics

    Science.gov (United States)

    Causa, Andrea; Mistretta, Maria Chiara; Acierno, Domenico; Filippone, Giovanni

    2014-05-01

    We prepare and characterize multiphase systems in which small amounts of recycled polymer, namely polyethylene terephtalate (PET) ground from waste bottles, are dispersed in a co-continuous blend of high-density polyethylene (HDPE) and polypropylene (PP). Some of such ternary systems are also filled with plate-like clay nanoparticles with different polarities, in order to assess their influence on the morphology and mechanical behaviour of the blends. On the basis of preliminary wettability considerations and inspections by means of scanning electron microscopy (SEM), the PET is found to preferentially locate within the PP phase. Such a positioning is desirable in order to minimize the presence of multiple interfaces, which is one of the major issues in the recycling process of co-mingles plastics. By means of SEM, dynamic-mechanical analysis and tensile tests we show that the addition of a filler with low polarity, which locates at the PET-matrix interface, has relevant implications on the structure and properties of the ternary systems, refining their morphology at the micro-scale and enhancing their high-temperature mechanical behaviour.

  12. Effectiveness of organoclays as compatibilizers for multiphase polymer blends – A sustainable route for the mechanical recycling of co-mingled plastics

    Energy Technology Data Exchange (ETDEWEB)

    Causa, Andrea; Acierno, Domenico; Filippone, Giovanni [Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università di Napoli Federico II, Piazzale V. Tecchio, 80, 80125 Napoli (Italy); Mistretta, Maria Chiara [Dipartimento di Ingegneria Civile, Ambientale, Aerospaziale, dei Materiali, Università di Palermo, Viale delle Scienze, ed. 6, 90128 Palermo (Italy)

    2014-05-15

    We prepare and characterize multiphase systems in which small amounts of recycled polymer, namely polyethylene terephtalate (PET) ground from waste bottles, are dispersed in a co-continuous blend of high-density polyethylene (HDPE) and polypropylene (PP). Some of such ternary systems are also filled with plate-like clay nanoparticles with different polarities, in order to assess their influence on the morphology and mechanical behaviour of the blends. On the basis of preliminary wettability considerations and inspections by means of scanning electron microscopy (SEM), the PET is found to preferentially locate within the PP phase. Such a positioning is desirable in order to minimize the presence of multiple interfaces, which is one of the major issues in the recycling process of co-mingles plastics. By means of SEM, dynamic-mechanical analysis and tensile tests we show that the addition of a filler with low polarity, which locates at the PET-matrix interface, has relevant implications on the structure and properties of the ternary systems, refining their morphology at the micro-scale and enhancing their high-temperature mechanical behaviour.

  13. Numerical study on multiphase flows induced by wall adhesion

    Energy Technology Data Exchange (ETDEWEB)

    Myong, Hyon Kook [Kookmin Univ., Seoul (Korea, Republic of)

    2012-07-15

    The present paper presents a numerical study on multiphase flows induced by wall adhesion. The continuum surface force (CSF) model with the wall adhesion boundary condition model is used for calculating the surface tension force; this model is implemented in an in house solution code (PowerCFD). The present method (code) employs an unstructured cell centered method based on a conservative pressure based finite volume method with a volume capturing method (CICSAM) in a volume of fluid (VOF) scheme for phase interface capturing. The effects of wall adhesion are then numerically simulated by using the present method for a shallow pool of water located at the bottom of a cylindrical tank with no external forces such as gravity. Two different cases are computed, one it which the water wets the wall and one in which the water does not wet the wall. It is found that the present method efficiently simulates the surface tension dominant multiphase flows induced by wall adhesion.

  14. Enhanced Light Scattering of Secondary Organic Aerosols by Multiphase Reactions.

    Science.gov (United States)

    Li, Kun; Li, Junling; Liggio, John; Wang, Weigang; Ge, Maofa; Liu, Qifan; Guo, Yucong; Tong, Shengrui; Li, Jiangjun; Peng, Chao; Jing, Bo; Wang, Dong; Fu, Pingqing

    2017-02-07

    Secondary organic aerosol (SOA) plays a pivotal role in visibility and radiative forcing, both of which are intrinsically linked to the refractive index (RI). While previous studies have focused on the RI of SOA from traditional formation processes, the effect of multiphase reactions on the RI has not been considered. Here, we investigate the effects of multiphase processes on the RI and light-extinction of m-xylene-derived SOA, a common type of anthropogenic SOA. We find that multiphase reactions in the presence of liquid water lead to the formation of oligomers from intermediate products such as glyoxal and methylglyoxal, resulting in a large enhancement in the RI and light-scattering of this SOA. These reactions will result in increases in light-scattering efficiency and direct radiative forcing of approximately 20%-90%. These findings improve our understanding of SOA optical properties and have significant implications for evaluating the impacts of SOA on the rapid formation of regional haze, global radiative balance, and climate change.

  15. Multiphase feeding program for broilers can replace traditional system

    Directory of Open Access Journals (Sweden)

    Luciano Hauschild

    2015-06-01

    Full Text Available Broilers are traditionally managed with feeding programs that often consist of three or four phases. In this study we investigated whether a multiphase feeding program (14 phases of broilers based on the optimal mix of two feeds could replace a traditional four phase system while maintaining broiler performance. To evaluate this prposed program we measured variables of performance, carcass yield, and nitrogen excretion. In addition, we determined if the multiphase feeding program (14 phases would be equally effective regardless of bird gender. A total of 480 day-old Cobb chicks were used, with an average weight of 44.74 ± 0.16 g (females and 44.71 ± 0.11 g (males. The birds were distributed in a completely randomized 2 × 2 factorial design. Each treatment consisted of six replicates with 20 animals per experimental unit. Results were analyzed separately in two periods (1–21 and 22–42 days as determined by slaughter date, as well as for the entire growth period (1–42 days. The multiphase program led to improvements in final body weight and average daily weight gain, in addition to an increase in breast yield.

  16. Multiphase groundwater flow near cooling plutons

    Science.gov (United States)

    Hayba, D.O.; Ingebritsen, S.E.

    1997-01-01

    We investigate groundwater flow near cooling plutons with a computer program that can model multiphase flow, temperatures up to 1200??C, thermal pressurization, and temperature-dependent rock properties. A series of experiments examines the effects of host-rock permeability, size and depth of pluton emplacement, single versus multiple intrusions, the influence of a caprock, and the impact of topographically driven groundwater flow. We also reproduce and evaluate some of the pioneering numerical experiments on flow around plutons. Host-rock permeability is the principal factor influencing fluid circulation and heat transfer in hydrothermal systems. The hottest and most steam-rich systems develop where permeability is of the order of 10-15 m2. Temperatures and life spans of systems decrease with increasing permeability. Conduction-dominated systems, in which permeabilities are ???10-16m2, persist longer but exhibit relatively modest increases in near-surface temperatures relative to ambient conditions. Pluton size, emplacement depth, and initial thermal conditions have less influence on hydrothermal circulation patterns but affect the extent of boiling and duration of hydrothermal systems. Topographically driven groundwater flow can significantly alter hydrothermal circulation; however, a low-permeability caprock effectively decouples the topographically and density-driven systems and stabilizes the mixing interface between them thereby defining a likely ore-forming environment.

  17. Shock driven multiphase flow with particle evaporation

    Science.gov (United States)

    Dahal, Jeevan; McFarland, Jacob

    2016-11-01

    The computational study of the shock driven instability of a multiphase system with particle evaporation is presented. The particle evaporation modifies the evolution of the interface due to the addition of the vapor phase to the gas. The effects can be quantitatively measured by studying various gas parameters like density, temperature, vorticity and particle properties like diameter and temperature. In addition, the size distribution of particles also modifies the development of instability as the larger size particles damp the evolution of interface in comparison to the smaller size particles. The simulation results are presented to study these effects using FLASH developed at the FLASH Center at the University of Chicago. The capabilities of FLASH for particle modeling were extended using the Particle in Cell (PIC) technique for coupling of mass, momentum, and energy between the particle and carrier gas. A seeded cylinder of gas with particles having either a single radius or a distribution of radii was studied. The enstrophy production and destruction mechanisms were explored to understand the reason for change in vorticity with particle size.

  18. Design of Multiphase Flow Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Urkedal, Hege

    1998-12-31

    This thesis proposes an experimental design procedure for multiphase experiments. The two-phase functions can be determined using data from a single experiment, while the three-phase relative permeabilities must be determined using data from multiple experiments. Various three-phase experimental designs have been investigated and the accuracy with which the flow functions may be determined using the corresponding data have been computed. Analytical sensitivity coefficients were developed from two-phase to three-phase flow. Sensitivity coefficients are the derivative of the model output with respect to the model parameters. They are obtained by a direct method that takes advantage of the fact that the model equations are solved using the Newton-Raphson method, and some of the results from this solution can be used directly when solving the sensitivity equation. Numerical derivatives are avoided, which improves accuracy. The thesis uses an inverse methodology for determination of two- and three-phase relative permeability and capillary pressure functions. The main work has been the development of analytical sensitivity coefficients for two-and three-phase flow. This technical contribution has improved the accuracy both in parameter estimation and accuracy assessment of the estimates and reduced the computer time requirements. The proposed experimental design is also dependent on accurate sensitivity coefficients to give the right guidelines for how two- and three-phase experiments should be conducted. Following the proposed experimental design, three-phase relative permeability and capillary pressure functions have been estimated when multiple sets of experimental data have been reconciled by simulations. 74 refs., 69 figs., 18 tabs.

  19. Radiation damage in multiphase ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Men, Danju [Department of Chemical Engineering and Materials Science, University of California, Irvine, CA 92697-2575 (United States); Patel, Maulik K.; Usov, Igor O. [Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Toiammou, Moidi; Monnet, Isabelle [CIMAP, CEA/CNRS/ENSICAEN/Universite de Caen-Basse Normandie, Bd Henri Becquerel, BP 5133, F-14070 Caen Cedex 5 (France); Pivin, Jean Claude [Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse, CNRS-IN2P3-Universite Paris Sud, UMR 8609, Bat. 108, 91405 Orsay (France); Porter, John R. [Materials Department, University of California, Santa Barbara, CA 93106-5050 (United States); Mecartney, Martha L., E-mail: martham@uci.edu [Department of Chemical Engineering and Materials Science, University of California, Irvine, CA 92697-2575 (United States)

    2013-11-15

    Graphical abstract: Display Omitted -- Abstract: Four-phase ceramic composites containing 3 mol% Y{sub 2}O{sub 3} stabilized ZrO{sub 2} (3Y-TZP), Al{sub 2}O{sub 3}, MgAl{sub 2}O{sub 4}, and LaPO{sub 4} were synthesized as model materials representing inert matrix fuel with enhanced thermal conductivity and decreased radiation-induced microstructural damage with respect to single-phase UO{sub 2}. This multi-phase concept, if successful, could be applied to design advanced nuclear fuels which could then be irradiated to higher burn-ups. 3Y-TZP in the composite represents a host (fuel) phase with the lowest thermal conductivity and Al{sub 2}O{sub 3} is the high thermal conductivity phase. The role of MgAl{sub 2}O{sub 4} and LaPO{sub 4} was to stabilize the structure under irradiation. The radiation response was evaluated by ion irradiation at 500 °C with 10 MeV Au ions and at 800 °C with 92 MeV Xe ions, to simulate damage due to primary knock-on atoms and fission fragments, respectively. Radiation damage and microstructural changes were characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy and computational modeling. Al{sub 2}O{sub 3}, Y{sub 2}O{sub 3} stabilized ZrO{sub 2} and MgAl{sub 2}O{sub 4} phases exhibit high amorphization resistance and remain stable when irradiated with both Au and Xe ions. A monoclinic-to-tetragonal phase transformation, however, is promoted by Xe and Au ion irradiation in 3Y-TZP. The LaPO{sub 4} monazite phase appears to melt, dewet the other phases, and recrystallize under Au irradiation, but does not change under Xe irradiation.

  20. Multiphase Systems for Medical Image Region Classification

    Science.gov (United States)

    Garamendi, J. F.; Malpica, N.; Schiavi, E.

    2009-05-01

    Variational methods for region classification have shown very promising results in medical image analysis. The Chan-Vese model is one of the most popular methods, but its numerical resolution is slow and it has serious drawbacks for most multiphase applications. In this work, we extend the link, stablished by Chambolle, between the two classes binary Chan-Vese model and the Rudin-Osher-Fatemi (ROF) model to a multiphase four classes minimal partition problem. We solve the ROF image restoration model and then we threshold the image by means of a genetic algorithm. This strategy allows for a more efficient algorithm due to the fact that only one well posed elliptic problem is solved instead of solving the coupled parabolic equations arising in the original multiphase Chan-Vese model.

  1. Multiphase reacting flows modelling and simulation

    CERN Document Server

    Marchisio, Daniele L

    2007-01-01

    The papers in this book describe the most widely applicable modeling approaches and are organized in six groups covering from fundamentals to relevant applications. In the first part, some fundamentals of multiphase turbulent reacting flows are covered. In particular the introduction focuses on basic notions of turbulence theory in single-phase and multi-phase systems as well as on the interaction between turbulence and chemistry. In the second part, models for the physical and chemical processes involved are discussed. Among other things, particular emphasis is given to turbulence modeling strategies for multiphase flows based on the kinetic theory for granular flows. Next, the different numerical methods based on Lagrangian and/or Eulerian schemes are presented. In particular the most popular numerical approaches of computational fluid dynamics codes are described (i.e., Direct Numerical Simulation, Large Eddy Simulation, and Reynolds-Averaged Navier-Stokes approach). The book will cover particle-based meth...

  2. Twin screw subsurface and surface multiphase pumps

    Energy Technology Data Exchange (ETDEWEB)

    Dass, P. [CAN-K GROUP OF COMPANIES, Edmonton, Alberta (Canada)

    2011-07-01

    A new subsurface twin screw multiphase pump has been developed to replace ESP and other artificial lift technologies. This technology has been under development for a few years, has been field tested and is now going for commercial applications. The subsurface twin screw technology consists of a pair of screws that do not touch and can be run with a top drive or submersible motor; and it carries a lot of benefits. This technology is easy to install and its low slippage makes it highly efficient with heavy oil. In addition twin screw multiphase pumps are capable of handling high viscosity fluids and thus their utilization can save water when used in thermal applications. It also induces savings of chemicals because asphaltenes do not break down easily as well as a reduction in SOR. The subsurface twin screw multiphase pump presented herein is an advanced technology which could be used in thermal applications.

  3. Multiphase flow dynamics 2 thermal and mechanical interactions

    CERN Document Server

    Kolev, Nikolay I

    2007-01-01

    The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. This book contains theory, methods and practical experience for describing complex transient multi-phase processes. It provides a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics.

  4. Multiphase Nanocrystalline Ceramic Concept for Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Mecartnery, Martha [Univ. of California, Irvine, CA (United States); Graeve, Olivia [Univ. of California, San Diego, CA (United States); Patel, Maulik [Univ. of Liverpool (United Kingdom)

    2017-05-25

    The goal of this research is to help develop new fuels for higher efficiency, longer lifetimes (higher burn-up) and increased accident tolerance in future nuclear reactors. Multiphase nanocrystalline ceramics will be used in the design of simulated advanced inert matrix nuclear fuel to provide for enhanced plasticity, better radiation tolerance, and improved thermal conductivity

  5. Periodical multiphasic screening and lung cancer prevention.

    Science.gov (United States)

    Carel, R S

    1998-06-01

    The purpose of this work is to evaluate the utilization of information gathered by multiphasic screening with respect to lung cancer detection and smoking cessation techniques. A cohort (follow-up) study is reported in which cancer incidence and factors affecting its occurrence are evaluated in a group of about 20,000 presumably healthy adults along a period of approximately 10 years following comprehensive multiphasic health examinations. Lung cancer occurrence is primarily related to smoking. The risk is higher in smokers and is dose-dependent; OR = 0.21, (CI = 0.08, .53) in never smokers, OR = 1.53 (CI = 0.8, 3.2) in past and current moderate smokers, OR = 4.92 (CI = 2.18, 11.11) in current heavy smokers. Moreover, smokers with compromised pulmonary function (FEVI/FVC periodical multiphasic health examinations could be utilized by health professionals to encourage smoking cessation and smoking prevention in the appropriate screenees. Various elements of the multiphasic test results could contribute to such prevention efforts. While every smoker should receive appropriate evaluation and consultation regarding nicotine dependence, smokers with reduced pulmonary function represent an extra high risk group to which special attention should be given.

  6. Multiphase flow in porous media using CFD

    DEFF Research Database (Denmark)

    Hemmingsen, Casper Schytte; Walther, Jens Honore

    We present results from a new Navier-Stokes model for multiphase flow in porous media implemented in Ansys Fluent 16.2 [1]. The model includes the Darcy-Forchheimer source terms in the momentum equations and proper account for relative permeability and capillary pressure in the porous media...... to model both the non-porous and porous media using the same formulation....

  7. Workshop on Scientific Issues in Multiphase Flow

    Energy Technology Data Exchange (ETDEWEB)

    Hanratty, Thomas J. [Univ. of Illinois, Urbana, IL (United States)

    2003-01-02

    This report outlines scientific issues whose resolution will help advance and define the field of multiphase flow. It presents the findings of four study groups and of a workshop sponsored by the Program on Engineering Physics of the Department of Energy. The reason why multiphase flows are much more difficult to analyze than single phase flows is that the phases assume a large number of complicated configurations. Therefore, it should not be surprising that the understanding of why the phases configure in a certain way is the principal scientific issue. Research is needed which identifies the microphysics controlling the organization of the phases, which develops physical models for the resultant multi-scale interactions and which tests their validity in integrative experiments/theories that look at the behavior of a system. New experimental techniques and recently developed direct numerical simulations will play important roles in this endeavor. In gas-liquid flows a top priority is to develop an understanding of why the liquid phase in quasi fully-developed pipe flow changes from one configuration to another. Mixing flows offer a more complicated situation in which several patterns can exist at the same time. They introduce new physical challenges. A second priority is to provide a quantitative description of the phase distribution for selected fully-developed flows and for simple mixing flows (that could include heat transfer and phase change). Microphysical problems of interest are identified – including the coupling of molecular and macroscopic behavior that can be observed in many situations and the formation/destruction of interfaces in the coalescence/breakup of drops and bubbles. Solid-fluid flows offer a simpler system in that interfaces are not changing. However, a variety of patterns exist, that depend on the properties of the particles, their concentration and the Reynolds number characterizing the relative velocity. A top priority is the

  8. Numerical modeling of multiphase flow in rough and propped fractures

    Science.gov (United States)

    Dabrowski, Marcin; Dzikowski, Michał; Jasinski, Lukasz; Olkiewicz, Piotr

    2017-04-01

    crystalline rocks. The detailed pattern of flow paths and effective fracture conductivity are largely dependent on the level of confining stresses and fracture wall roughness, which both determine the shape and distribution of fracture apertures and contact areas. The distribution of proppant grains, which are used to maintain apertures of hydraulic fractures, is a key factor governing fracture flow in industrial applications. The flow of multiphase fluids in narrow apertures of rock fractures may substantially differ from the flow of a single-phase fluid. For example, multiphase flow effects play an important role during all stages of unconventional reservoir life cycle. Multiphase flow conditions are also expected to prevail in high temperature geothermal fields and during the transport of non aqueous phase liquid contaminants in groundwaters. We use direct numerical simulations to study single- and multiphase flow in rough and propped fractures. We compute the fluid flow using either the finite element or the lattice Boltzmann method. Body-fitting, unstructured computational meshes are used to improve the numerical accuracy. The fluid-fluid and fluid-solid interfaces are directly resolved and an implicit approach to surface tension is used to alleviate restrictions due to capillary CFL condition. In FEM simulations, the Beltrami-Laplace operator is integrated by parts to avoid interface curvature computation during evaluation of the surface tension term. We derive and validate an upscaled approach to Stokes flow in propped and rough fractures. Our upscaled 2.5D fracture flow model features a Brinkman term and is capable of treating no-slip boundary conditions on the rims of proppant grains and fracture wall contact areas. The Stokes-Brinkman fracture flow model provides an improvement over the Reynolds model, both in terms of the effective fracture permeability and the local flow pattern. We present numerical and analytical models for the propped fracture

  9. Performance analysis of variable speed multiphase induction motor with pole phase modulation

    Directory of Open Access Journals (Sweden)

    Liu Huijuan

    2016-09-01

    Full Text Available The pole phase modulation (PPM technique is an effective method to extend speed range and torque capabilities for an integrated starter and hybrid electric vehicles applications. In this paper, the five pole-phase combination types of a multiphase induction motor (IM with 36 stator slots and 36 stator conductors are presented and compared quantitatively by using the time-stepping finite element method (TS-FEM. The 36 stator conductors of the proposed multiphase IM are fed by a 36 leg inverter and the current phase angle and amplitude of each stator conductor can be controlled independently. This paper focuses on the winding connection, the PPM technique and the performance comparative analysis of each pole-phase combination types of the proposed multiphase IM. The flux distribution, air-gap flux density, output torque, core losses and efficiency of five pole-phase combination types have been investigated.

  10. The distribution of mean and fluctuating magnetic fields in the multi-phase ISM

    CERN Document Server

    Evirgen, Cetin Can; Shukurov, Anvar; Fletcher, Andrew; Bushby, Paul

    2016-01-01

    We explore the effects of the multi-phase structure of the interstellar medium (ISM) on galactic magnetic fields. Basing our analysis on compressible magnetohydrodynamic (MHD) simulations of supernova-driven turbulence in the ISM, we investigate the properties of both the mean and fluctuating components of the magnetic field. We find that the mean magnetic field preferentially resides in the warm phase and is generally absent from the hot phase. The fluctuating magnetic field does not show such pronounced sensitivity to the multi-phase structure.

  11. Application and Perspectives of Multiphase Induction Motors

    Directory of Open Access Journals (Sweden)

    Benas Kundrotas

    2012-04-01

    Full Text Available The article considers the areas of applying multiphase induction motors. Their advantages against three phase motors have become the main reason for employing them in multiphase drives. The paper deals with the six-phase induction motor having two similar three phase windings in the stator shifted by 30 degrees in space and three phase windings in the rotor. Differential equations for this motor are presented and transformed to dq synchronous reference frame. The transformed equations are expressed in a matrix form and solved by MATLAB software using the Dormand-Prince (ode45 method. The transient characteristics of the torque, speed and current of the six-phase induction motor are calculated and discussed.Article in Lithuanian

  12. Error handling strategies in multiphase inverse modeling

    Energy Technology Data Exchange (ETDEWEB)

    Finsterle, S.; Zhang, Y.

    2010-12-01

    Parameter estimation by inverse modeling involves the repeated evaluation of a function of residuals. These residuals represent both errors in the model and errors in the data. In practical applications of inverse modeling of multiphase flow and transport, the error structure of the final residuals often significantly deviates from the statistical assumptions that underlie standard maximum likelihood estimation using the least-squares method. Large random or systematic errors are likely to lead to convergence problems, biased parameter estimates, misleading uncertainty measures, or poor predictive capabilities of the calibrated model. The multiphase inverse modeling code iTOUGH2 supports strategies that identify and mitigate the impact of systematic or non-normal error structures. We discuss these approaches and provide an overview of the error handling features implemented in iTOUGH2.

  13. Variational continuum multiphase poroelasticity theory and applications

    CERN Document Server

    Serpieri, Roberto

    2017-01-01

    This book collects the theoretical derivation of a recently presented general variational macroscopic continuum theory of multiphase poroelasticity (VMTPM), together with its applications to consolidation and stress partitioning problems of interest in several applicative engineering contexts, such as in geomechanics and biomechanics. The theory is derived based on a purely-variational deduction, rooted in the least-Action principle, by considering a minimal set of kinematic descriptors. The treatment herein considered keeps a specific focus on the derivation of most general medium-independent governing equations. It is shown that VMTPM recovers paradigms of consolidated use in multiphase poroelasticity such as Terzaghi's stress partitioning principle and Biot's equations for wave propagation. In particular, the variational treatment permits the derivation of a general medium-independent stress partitioning law, and the proposed variational theory predicts that the external stress, the fluid pressure, and the...

  14. Modeling variability in porescale multiphase flow experiments

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Bowen; Bao, Jie; Oostrom, Mart; Battiato, Ilenia; Tartakovsky, Alexandre M.

    2017-07-01

    Microfluidic devices and porescale numerical models are commonly used to study multiphase flow in biological, geological, and engineered porous materials. In this work, we perform a set of drainage and imbibition experiments in six identical microfluidic cells to study the reproducibility of multiphase flow experiments. We observe significant variations in the experimental results, which are smaller during the drainage stage and larger during the imbibition stage. We demonstrate that these variations are due to sub-porescale geometry differences in microcells (because of manufacturing defects) and variations in the boundary condition (i.e.,fluctuations in the injection rate inherent to syringe pumps). Computational simulations are conducted using commercial software STAR-CCM+, both with constant and randomly varying injection rate. Stochastic simulations are able to capture variability in the experiments associated with the varying pump injection rate.

  15. Online recognition of the multiphase flow regime

    Institute of Scientific and Technical Information of China (English)

    BAI BoFeng; ZHANG ShaoJun; ZHAO Liang; ZHANG XiMin; GUO LieJin

    2008-01-01

    The key reasons that the present method cannot be used to solve the industrial multi-phase flow pattern recognition are clarified firstly. The prerequisite to realize the online recognition is proposed and recognition rules for partial flow pattern are obtained based on the massive experimental data. The standard templates for every flow regime feature are calculated with self-organization cluster algorithm. The multi-sensor data fusion method is proposed to realize the online recognition of multiphase flow regime with the pressure and differential pressure signals, which overcomes the severe influence of fluid flow velocity and the oil fraction on the recognition. The online recognition method is tested in the practice, which has less than 10 percent measurement error. The method takes advantages of high confidence, good fault tolerance and less requirement of single sensor performance.

  16. Modeling variability in porescale multiphase flow experiments

    Science.gov (United States)

    Ling, Bowen; Bao, Jie; Oostrom, Mart; Battiato, Ilenia; Tartakovsky, Alexandre M.

    2017-07-01

    Microfluidic devices and porescale numerical models are commonly used to study multiphase flow in biological, geological, and engineered porous materials. In this work, we perform a set of drainage and imbibition experiments in six identical microfluidic cells to study the reproducibility of multiphase flow experiments. We observe significant variations in the experimental results, which are smaller during the drainage stage and larger during the imbibition stage. We demonstrate that these variations are due to sub-porescale geometry differences in microcells (because of manufacturing defects) and variations in the boundary condition (i.e., fluctuations in the injection rate inherent to syringe pumps). Computational simulations are conducted using commercial software STAR-CCM+, both with constant and randomly varying injection rates. Stochastic simulations are able to capture variability in the experiments associated with the varying pump injection rate.

  17. Non-Equilibrium Thermodynamics in Multiphase Flows

    CERN Document Server

    Mauri, Roberto

    2013-01-01

    Non-equilibrium thermodynamics is a general framework that allows the macroscopic description of irreversible processes. This book introduces non-equilibrium thermodynamics and its applications to the rheology of multiphase flows. The subject is relevant to graduate students in chemical and mechanical engineering, physics and material science. This book is divided into two parts. The first part presents the theory of non-equilibrium thermodynamics, reviewing its essential features and showing, when possible, some applications. The second part of this book deals with how the general theory can be applied to model multiphase flows and, in particular, how to determine their constitutive relations. Each chapter contains problems at the end, the solutions of which are given at the end of the book. No prior knowledge of statistical mechanics is required; the necessary prerequisites are elements of transport phenomena and on thermodynamics. “The style of the book is mathematical, but nonetheless it remains very re...

  18. Multiphase Transformer Modelling using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Nor Azizah Mohd Yusoff

    2015-03-01

    Full Text Available In the year of 1970 saw the starting invention of the five-phase motor as the milestone in advanced electric motor. Through the years, there are many researchers, which passionately worked towards developing for multiphase drive system. They developed a static transformation system to obtain a multiphase supply from the available three-phase supply. This idea gives an influence for further development in electric machines as an example; an efficient solution for bulk power transfer. This paper highlighted the detail descriptions that lead to five-phase supply with fixed voltage and frequency by using Finite-Element Method (FEM. Identifying of specification on a real transformer had been done before applied into software modeling. Therefore, Finite-Element Method provides clearly understandable in terms of visualize the geometry modeling, connection scheme and output waveform.

  19. Modified Invasion Percolation Models for Multiphase Processes

    Energy Technology Data Exchange (ETDEWEB)

    Karpyn, Zuleima [Pennsylvania State Univ., State College, PA (United States)

    2015-01-31

    This project extends current understanding and modeling capabilities of pore-scale multiphase flow physics in porous media. High-resolution X-ray computed tomography imaging experiments are used to investigate structural and surface properties of the medium that influence immiscible displacement. Using experimental and computational tools, we investigate the impact of wetting characteristics, as well as radial and axial loading conditions, on the development of percolation pathways, residual phase trapping and fluid-fluid interfacial areas.

  20. NMR studies of multiphase flows II

    Energy Technology Data Exchange (ETDEWEB)

    Altobelli, S.A.; Caprihan, A.; Fukushima, E. [Lovelace Institutes, Albuquerque, NM (United States)] [and others

    1995-12-31

    NMR techniques for measurements of spatial distribution of material phase, velocity and velocity fluctuation are being developed and refined. Versions of these techniques which provide time average liquid fraction and fluid phase velocity have been applied to several concentrated suspension systems which will not be discussed extensively here. Technical developments required to further extend the use of NMR to the multi-phase flow arena and to provide measurements of previously unobtainable parameters are the focus of this report.

  1. Multi-phase multi-component reactive flow in Geodynamics

    Science.gov (United States)

    Oliveira, Beñat; Afonso, Juan Carlos; Zlotnik, Sergio

    2016-04-01

    Multi-phase multi-component reactive flow (MPMCRF) controls a number of important complex geodynamic/geochemical problems, such as melt generation and percolation, metasomatism, rheological weakening, magmatic differentiation, ore emplacement, and fractionation of chemical elements, to name a few. These interacting processes occur over very different spatial and temporal scales and under very different physico-chemical conditions. Therefore, there is a strong motivation in geodynamics for investigating the equations governing MPMCRF, their mathematical structure and properties, and the numerical techniques necessary to obtain reliable and accurate results. In this contribution we present results from a novel numerical framework to solve multiscale MPMCRF problems in geodynamic contexts. Our approach is based on the effective tracking of the most basic building blocks: internal energy and chemical composition. This is achieved through the combination of rigorous solutions to the conservation equations (mass, energy and momentum) for each dynamic phase (instead of the more common "mixture-type" approach) and the transport equation for the chemical species, within the context of classical irreversible thermodynamics. Interfacial processes such as phase changes, chemical diffusion+reaction, and surface tension effects are explicitly incorporated in the context of ensemble averaging. Phase assemblages, mineral and melt compositions, and all other physical parameters of multi-phase systems are obtained through dynamic free-energy minimization procedures.

  2. Impact Detection for Characterization of Complex Multiphase Flows

    Science.gov (United States)

    Chan, Wai Hong Ronald; Urzay, Javier; Mani, Ali; Moin, Parviz

    2016-11-01

    Multiphase flows often involve a wide range of impact events, such as liquid droplets impinging on a liquid pool or gas bubbles coalescing in a liquid medium. These events contribute to a myriad of large-scale phenomena, including breaking waves on ocean surfaces. As impacts between surfaces necessarily occur at isolated points, numerical simulations of impact events will require the resolution of molecular scales near the impact points for accurate modeling. This can be prohibitively expensive unless subgrid impact and breakup models are formulated to capture the effects of the interactions. The first step in a large-eddy simulation (LES) based computational methodology for complex multiphase flows like air-sea interactions requires effective detection of these impact events. The starting point of this work is a collision detection algorithm for structured grids on a coupled level set / volume of fluid (CLSVOF) solver adapted from an earlier algorithm for cloth animations that triangulates the interface with the marching cubes method. We explore the extension of collision detection to a geometric VOF solver and to unstructured grids. Supported by ONR/A*STAR. Agency of Science, Technology and Research, Singapore; Office of Naval Research, USA.

  3. Measurement strategies for downhole multiphase metering

    Energy Technology Data Exchange (ETDEWEB)

    Hammer, Erling A.; Johansen, Geir Anton; Tollefsen, Jarle; Aabro, Eirik [Bergen Univ.(Norway)

    1997-07-01

    There will be an increasing demand for multiphase subsea and downhole meters in the future. Both at the sea bottom and downhole the flow regimes in the production pipes or in the manifolds at the templates, may differ from the ideal homogeneous mixture. Further, in line mixers should be avoided to reduce pressure drops and maintenance costs. The next generation multiphase meters will therefore call for flow regime independent and non-intrusive sensor systems. Since all sensor principles used in multiphase flowmeters today are highly dependent on the distribution of the components in the mixture, and thus make the measurement range limited, multi-sensor principles may be the solution to obtain better accuracy for larger ranges of component fractions and applications. Both the capacitance-, conductance-, microwave- and gamma-principles can be used in multi-sensor arrangement to provide cross-sectional information about the component distribution. Hence, the meter can be used at all types of flow regimes and at any position without mixers or separators. (author)

  4. Pattern recognition techniques for horizontal and vertically upward multiphase flow measurement

    Science.gov (United States)

    Arubi, Tesi I. M.; Yeung, Hoi

    2012-03-01

    The oil and gas industry need for high performing and low cost multiphase meters is ever more justified given the rapid depletion of conventional oil reserves that has led oil companies to develop smaller and marginal fields and reservoirs in remote locations and deep offshore, thereby placing great demands for compact and more cost effective solutions of on-line continuous multiphase flow measurement for well testing, production monitoring, production optimisation, process control and automation. The pattern recognition approach for clamp-on multiphase measurement employed in this study provides one means for meeting this need. High speed caesium-137 radioisotope-based densitometers were installed vertically at the top of a 50.8mm and 101.6mm riser as well as horizontally at the riser base in the Cranfield University multiphase flow test facility. A comprehensive experimental campaign comprising flow conditions typical of operating conditions found in the Petroleum Industry was conducted. The application of a single gamma densitometer unit, in conjunction with pattern recognition techniques to determine both the phase volume fractions and velocities to yield the individual phase flow rates of horizontal and vertically upward multiphase flows was investigated. The pattern recognition systems were trained to map the temporal fluctuations in the multiphase mixture density with the individual phase flow rates using statistical features extracted from the gamma counts signals as their inputs. Initial results yielded individual phase flow rate predictions to within ±5% relative error for the two phase airwater flows and ±10% for three phase air-oil-water flows data.

  5. Black hole feedback in a multiphase interstellar medium

    Science.gov (United States)

    Bourne, Martin A.; Nayakshin, Sergei; Hobbs, Alexander

    2014-07-01

    Ultrafast outflows (UFOs) from supermassive black holes (SMBHs) are thought to regulate the growth of SMBHs and host galaxies, resulting in a number of observational correlations. We present high-resolution numerical simulations of the impact of a thermalized UFO on the ambient gas in the inner part of the host galaxy. Our results depend strongly on whether the gas is homogeneous or clumpy. In the former case all of the ambient gas is driven outward rapidly as expected based on commonly used energy budget arguments, while in the latter the flows of mass and energy de-couple. Carrying most of the energy, the shocked UFO escapes from the bulge via paths of least resistance, taking with it only the low-density phase of the host. Most of the mass is however in the high-density phase, and is affected by the UFO much less strongly, and may even continue to flow inwards. We suggest that the UFO energy leakage through the pores in the multiphase interstellar medium (ISM) may explain why observed SMBHs are so massive despite their overwhelmingly large energy production rates. The multiphase ISM effects reported here are probably under-resolved in cosmological simulations but may be included in prescriptions for active galactic nuclei feedback in future simulations and in semi-analytical models.

  6. Multiphase flows in complex geometries: a UQ perspective

    KAUST Repository

    Icardi, Matteo

    2015-01-07

    Nowadays computer simulations are widely used in many multiphase flow applications involving interphases, dispersed particles, and complex geometries. Most of these problems are solved with mixed models composed of fundamental physical laws, rigorous mathematical upscaling, and empirical correlations/closures. This means that classical inference techniques or forward parametric studies, for example, becomes computationally prohibitive and must take into account the physical meaning and constraints of the equations. However mathematical techniques commonly used in Uncertainty Quantification can come to the aid for the (i) modeling, (ii) simulation, and (iii) validation steps. Two relevant applications for environmental, petroleum, and chemical engineering will be presented to highlight these aspects and the importance of bridging the gaps between engineering applications, computational physics and mathematical methods. The first example is related to the mathematical modeling of sub-grid/sub-scale information with Probability Density Function (PDF) models in problems involving flow, mixing, and reaction in random environment. After a short overview of the research field, some connections and similarities with Polynomial Chaos techniques, will be investigated. In the second example, averaged correlations laws and effective parameters for multiphase flow and their statistical fluctuations, will be considered and efficient computational techniques, borrowed from high-dimensional stochastic PDE problems, will be applied. In presence of interfacial flow, where small spatial scales and fast time scales are neglected, the assessment of robustness and predictive capabilities are studied. These illustrative examples are inspired by common problems arising, for example, from the modeling and simulation of turbulent and porous media flows.

  7. Construction of a Parallel Algorithm to Solve the Multiphase Gas Dynamics Problem

    Directory of Open Access Journals (Sweden)

    B. Rybakin

    1995-11-01

    Full Text Available This paper considers questions of an effective use of multiprocessor computing system to implement a parallel algorithm solving the multiphase gas dynamics problem. A technique is offered to parallelize the two-dimensional explicit differential scheme to implement it on multiprocessor systems with distributed memory (MIMD architecture.

  8. Multiscale Structure-Performance Relationships in Supported Palladium Catalysis for Multiphase Hydrogenations

    NARCIS (Netherlands)

    Bakker, J.J.W.

    2012-01-01

    The performance of heterogeneous catalysts in multiphase reactions in general is governed by different types of extrinsic and intrinsic structural effects on all length scales, i.e., on the macro- (m to cm), meso- (mm to µm), and microlevel (nm). This PhD research, with a catalysis-engineering appro

  9. Effects of Bonding Types and Functional Groups on CO 2 Capture using Novel Multiphase Systems of Liquid-like Nanoparticle Organic Hybrid Materials

    KAUST Repository

    Lin, Kun-Yi Andrew

    2011-08-01

    Novel liquid-like nanoparticle organic hybrid materials (NOHMs) which possess unique features including negligible vapor pressure and a high degree of tunability were synthesized and their physical and chemical properties as well as CO 2 capture capacities were investigated. NOHMs can be classified based on the synthesis methods involving different bonding types, the existence of linkers, and the addition of task-specific functional groups including amines for CO 2 capture. As a canopy of polymeric chains was grafted onto the nanoparticle cores, the thermal stability of the resulting NOHMs was improved. In order to isolate the entropy effect during CO 2 capture, NOHMs were first prepared using polymers that do not contain functional groups with strong chemical affinity toward CO 2. However, it was found that even ether groups on the polymeric canopy contributed to CO 2 capture in NOHMs via Lewis acid-base interactions, although this effect was insignificant compared to the effect of task-specific functional groups such as amine. In all cases, a higher partial pressure of CO 2 was more favorable for CO 2 capture, while a higher temperature caused an adverse effect. Multicyclic CO 2 capture tests confirmed superior recyclability of NOHMs and NOHMs also showed a higher selectivity toward CO 2 over N 2O, O 2 and N 2. © 2011 American Chemical Society.

  10. Effects of bonding types and functional groups on CO2 capture using novel multiphase systems of liquid-like nanoparticle organic hybrid materials.

    Science.gov (United States)

    Lin, Kun-Yi Andrew; Park, Ah-Hyung Alissa

    2011-08-01

    Novel liquid-like nanoparticle organic hybrid materials (NOHMs) which possess unique features including negligible vapor pressure and a high degree of tunability were synthesized and their physical and chemical properties as well as CO(2) capture capacities were investigated. NOHMs can be classified based on the synthesis methods involving different bonding types, the existence of linkers, and the addition of task-specific functional groups including amines for CO(2) capture. As a canopy of polymeric chains was grafted onto the nanoparticle cores, the thermal stability of the resulting NOHMs was improved. In order to isolate the entropy effect during CO(2) capture, NOHMs were first prepared using polymers that do not contain functional groups with strong chemical affinity toward CO(2). However, it was found that even ether groups on the polymeric canopy contributed to CO(2) capture in NOHMs via Lewis acid-base interactions, although this effect was insignificant compared to the effect of task-specific functional groups such as amine. In all cases, a higher partial pressure of CO(2) was more favorable for CO(2) capture, while a higher temperature caused an adverse effect. Multicyclic CO(2) capture tests confirmed superior recyclability of NOHMs and NOHMs also showed a higher selectivity toward CO(2) over N(2)O, O(2) and N(2).

  11. Computational Fluid Dynamics Simulation of Multiphase Flow in Structured Packings

    Directory of Open Access Journals (Sweden)

    Saeed Shojaee

    2012-01-01

    Full Text Available A volume of fluid multiphase flow model was used to investigate the effective area and the created liquid film in the structured packings. The computational results revealed that the gas and liquid flow rates play significant roles in the effective interfacial area of the packing. In particular, the effective area increases as the flow rates of both phases increase. Numerical results were compared with the Brunazzi and SRP models, and a good agreement between them was found. Attention was given to the process of liquid film formation in both two-dimensional (2D and three-dimensional (3D models. The current study revealed that computational fluid dynamics (CFD can be used as an effective tool to provide information on the details of gas and liquid flows in complex packing geometries.

  12. A Course in Transport Phenomena in Multicomponent, Multiphase, Reacting Systems.

    Science.gov (United States)

    Carbonell, R. G.; Whitaker, S.

    1978-01-01

    This course concentrates on a rigorous development of the multicomponent transport equations, boundary conditions at phase interfaces, and volume-averaged transport equations for multiphase reacting systems. (BB)

  13. Pore network modeling to explore the effects of compression on multiphase transport in polymer electrolyte membrane fuel cell gas diffusion layers

    Science.gov (United States)

    Fazeli, Mohammadreza; Hinebaugh, James; Fishman, Zachary; Tötzke, Christian; Lehnert, Werner; Manke, Ingo; Bazylak, Aimy

    2016-12-01

    Understanding how compression affects the distribution of liquid water and gaseous oxygen in the polymer electrolyte membrane fuel cell gas diffusion layer (GDL) is vital for informing the design of improved porous materials for effective water management strategies. Pore networks extracted from synchrotron-based micro-computed tomography images of compressed GDLs were employed to simulate liquid water transport in GDL materials over a range of compression pressures. The oxygen transport resistance was predicted for each sample under dry and partially saturated conditions. A favorable GDL compression value for a preferred liquid water distribution and oxygen diffusion was found for Toray TGP-H-090 (10%), yet an optimum compression value was not recognized for SGL Sigracet 25BC. SGL Sigracet 25BC exhibited lower transport resistance values compared to Toray TGP-H-090, and this is attributed to the additional diffusion pathways provided by the microporous layer (MPL), an effect that is particularly significant under partially saturated conditions.

  14. Evaluation of the Synergistic Effect of Erosion-Corrosion on AISI 4330 Steel in Saline-Sand Multiphase Flow by Electrochemical and Gravimetric Techniques

    Directory of Open Access Journals (Sweden)

    Dario Yesid Peña Ballesteros

    2016-01-01

    Full Text Available The synergistic effects of fluid flow, sand particles, and solution pH on erosion-corrosion of AISI 4330 steel alloy in saline-sand medium were studied through a rotating cylinder electrode (RCE system by weight-loss and electrochemical measurements. The worn surface was analyzed by X-ray diffraction (XRD and scanning electron microscopy (SEM. Results show that, under all the test conditions assessed, the passivity of the steel alloy could not be maintained; as a result, an activation mechanism dominates the corrosion process of steel alloy. Furthermore, the potentiodynamic curves show that, with the increasing of the electrode flow rate and particle size, the anodic current density increased, which is due to deterioration of the electrode by the impacting slurry. Although the increase of particle size affects the anodic current density, the effect of particle size does not cause a significant change in the polarization behavior of the steel electrode. The electrochemical impedance and potentiodynamic curves suggest that erosion-corrosion phenomenon of the ASISI 4330 steel is under mixed control of mass transport and charge transfer. The inductive loops formed in the impedance plots are representative of an increase in roughness of the electrode caused by the particles impacting at the surface. The change in the passivity of the steel alloy as the pH is altered plays an important role in the corrosion rate.

  15. Multiphase flow in porous media

    Science.gov (United States)

    Adler, Pierre M.; Brenner, Howard

    A development history and current status evaluation are presented for the theory of permeability and percolation. The microscale phenomena treated in this field have proven difficult to analyze due both to their tortuous geometry and the influence of capilarity. Capilary effects may be not only important but predominant, and are differentiated into those at the fluid-fluid interface, and those involving the existence of a contact line between the solid substrate and this interface. Percolation theory has been borrowed from physics and adapted to the two-phase engineering context.

  16. [Polycythemia vera as a multiphasic clonal panmyelopathy: diagnostic profile, chronic pathological progression and effect of therapy on the survival of 74 cases].

    Science.gov (United States)

    Sánchez Fayos, J; Prieto, E; Román, A; Soto de Ozaeta, C; Nevado, I; Richart, A; Chica, E; Loscertales, J; Calabuig, T; Benítez, J; Outeiriño, J

    1996-12-01

    1. To recognise the clinico-biological profile of a group of patients diagnosed of polycythaemia vera (PV) in our centre in the last 30 years. 2. To identify the evolutive patterns of haematological transformation. 3. To evaluate the effect of therapy on the survival. The clinical records of 74 patients (median age 62 years, male/female = 0.94, followed-up for 6-357 months, median 64 months) were reviewed. Clinico-biological data at diagnosis, therapy, complications and evolution of the haematological picture were evaluated in each case. The actuarial survival in the series was compared to that of the normal population. The clinico-analytical data and diagnostic features were identical to other series reported. Mild increases of bone marrow reticulin was present in two thirds of the cases, overt myelofibrosis being found in only 10% of the patients. Abnormal karyotype was seen in 9% of the patients (11q-, -Y). Phlebotomy was the only treatment in eight cases, without increased incidence of thrombotic phenomena. The remainders received myelosuppressive therapy (32P, busulphan, pipobroman, hydroxyurea, etc.), thrombotic complications appearing in 8 cases and haemorrhagic complications in 4 others. One of these latter patients developed oesophageal carcinoma. The haematological picture evolved into toxic aplastic anaemia in 2 cases; myelofibrosis with myeloid metaplasia (MF/MM) in 8; myelodysplastic sindromes (MDS) in 5, three of them RAEB; and acute myelogenous leukaemia in 3 cases, two of them as the final stage of previous MF/MM and MDS/ RAEB. The actuarial survival was 71% at ten years and 46% at fifteen years, and the median survival as a whole was 13.5 years. 1: The treatment, mostly myelosuppressive, given to these patients attained a survival similar to that of the general population. 2: Of the cases with known evolution, 15.6% developed MF/MM, its incidence being higher in patients treated only with phlebotomy (37%). 3: The incidence of malignant evolution, i

  17. Transport phenomena in multiphase flows

    CERN Document Server

    Mauri, Roberto

    2015-01-01

    This textbook provides a thorough presentation of the phenomena related to the transport of mass, momentum and energy.  It lays all the basic physical principles, then for the more advanced readers, it offers an in-depth treatment with advanced mathematical derivations and ends with some useful applications of the models and equations in specific settings. The important idea behind the book is to unify all types of transport phenomena, describing them within a common framework in terms of cause and effect, respectively represented by the driving force and the flux of the transported quantity. The approach and presentation are original in that the book starts with a general description of transport processes, providing the macroscopic balance relations of fluid dynamics and heat and mass transfer, before diving into the mathematical realm of continuum mechanics to derive the microscopic governing equations at the microscopic level. The book is a modular teaching tool and can be used either for an introductory...

  18. MULTI-PHASE FRACTURE-MATRIX INTERACTIONS UNDER STRESS CHANGES

    Energy Technology Data Exchange (ETDEWEB)

    A.S. Grader; D. Elsworth; P.M. Halleck; F. Alvarado; A. Alajmi; Z. Karpyn; N. Mohammed; S. Al-Enezi

    2005-06-15

    The main objectives of this project are to quantify the changes in fracture porosity and multiphase transport properties as a function of confining stress. These changes will be integrated into conceptual and numerical models that will improve our ability to predict and optimize fluid transport in fractured system. This report details our progress on: (a) developing the direct experimental measurements of fracture aperture and topology and fluid occupancy using high-resolution x-ray micro-tomography, (b) quantifying the effect of confining stress on the distribution of fracture aperture, and (c) characterization of shear fractures and their impact on multi-phase flow. The three-dimensional surface that describes the large-scale structure of the fracture in the porous medium can be determined using x-ray micro-tomography with significant accuracy. Several fractures have been scanned and the fracture aperture maps have been extracted. The success of the mapping of fracture aperture was followed by measuring the occupancy of the fracture by two immiscible phases, water and decane, and water and kerosene. The distribution of fracture aperture depends on the effective confining stress on the nature of the rock and the type and distribution of the asperities that keep the fracture open. Fracture apertures at different confining stresses were obtained by micro-tomography covering a range of about two thousand psig. Initial analysis of the data shows a significant aperture closure with increase in effective confining stress. Visual descriptions of the process are shown in the report while detailed analysis of the behavior of the distribution of fracture aperture is in progress. Both extensional and shear fractures are being considered. The initial multi-phase flow tests were done in extensional fractures. Several rock samples with induced shear fracture are being studies, and some of the new results are presented in this report. These samples are being scanned in order to

  19. Axisymmetric multiphase lattice Boltzmann method for generic equations of state

    NARCIS (Netherlands)

    Reijers, Sten Arjen; Gelderblom, Hanneke; Toschi, F.

    2016-01-01

    We present an axisymmetric lattice Boltzmann model based on the Kupershtokh et al. multiphase model that is capable of solving liquid–gas density ratios up to 103. Appropriate source terms are added to the lattice Boltzmann evolution equation to fully recover the axisymmetric multiphase conservation

  20. Industrial applications of multi-functional, multi-phase reactors

    NARCIS (Netherlands)

    Harmsen, G.J.; Chewter, L.A.

    1999-01-01

    To reveal trends in the design and operation of multi-functional, multi-phase reactors, this paper describes, in historical sequence, three industrial applications of multi-functional, multi-phase reactors developed and operated by Shell Chemicals during the last five decades. For each case, we desc

  1. Soft-sensing, non-intrusive multiphase flow meter

    NARCIS (Netherlands)

    Wrobel, K.; Schiferli, W.

    2009-01-01

    For single phase flow meters more and better non-intrusive or even clamp-on meters become available. This allows for a wider use of meters and for easier flow control. As the demand for multiphase meters is increasing, the current aim is to develop a non-intrusive multiphase flow meter. The non-intr

  2. Axisymmetric multiphase lattice Boltzmann method for generic equations of state

    NARCIS (Netherlands)

    Reijers, S.A.; Gelderblom, H.; Toschi, F.

    2016-01-01

    We present an axisymmetric lattice Boltzmann model based on the Kupershtokh et al. multiphase model that is capable of solving liquid–gas density ratios up to 103. Appropriate source terms are added to the lattice Boltzmann evolution equation to fully recover the axisymmetric multiphase conservation

  3. Modelling of fluid-structure interaction with multiphase viscous flows using an immersed-body method

    Science.gov (United States)

    Yang, P.; Xiang, J.; Fang, F.; Pavlidis, D.; Latham, J.-P.; Pain, C. C.

    2016-09-01

    An immersed-body method is developed here to model fluid-structure interaction for multiphase viscous flows. It does this by coupling a finite element multiphase fluid model and a combined finite-discrete element solid model. A coupling term containing the fluid stresses is introduced within a thin shell mesh surrounding the solid surface. The thin shell mesh acts as a numerical delta function in order to help apply the solid-fluid boundary conditions. When used with an advanced interface capturing method, the immersed-body method has the capability to solve problems with fluid-solid interfaces in the presence of multiphase fluid-fluid interfaces. Importantly, the solid-fluid coupling terms are treated implicitly to enable larger time steps to be used. This two-way coupling method has been validated by three numerical test cases: a free falling cylinder in a fluid at rest, elastic membrane and a collapsing column of water moving an initially stationary solid square. A fourth simulation example is of a water-air interface with a floating solid square being moved around by complex hydrodynamic flows including wave breaking. The results show that the immersed-body method is an effective approach for two-way solid-fluid coupling in multiphase viscous flows.

  4. An experimental investigation of the multiphase flows in a photobioreactor for algae cultivation

    Science.gov (United States)

    Yang, Zifeng; Hu, Hui; Del Ninno, Matteo; Wen, Zhiyou

    2011-11-01

    Algal biomass is a promising feedstock for biofuels production, with photobioreactors being one of the major cultivation systems for algal cells. Light absorption, fluid dynamics, and algal metabolism are three key factors in determining the overall performance of a photobioreactor. The behavior of the multiphase flow (i.e., liquid phase - water, gas phase - CO2 and O2, and solid phase - algal cells) and turbulent mixing inside the reactor are the core connecting the three factors together. One of the major challenges in the optimal design of photobioreactors for algae cultivation is the lack of in-depth understanding of the characteristics of the multiphase flows and turbulent mixing. In this study, we present a comprehensive experimental study to investigate the effects of turbulent mixing in photobioreactors on the performance of a photobioreactor for algae cultivation. A high-resolution particle image velocity (PIV) system is used to achieve time-resolved, in-situ flow field measurements to quantify the turbulent mixing of the multiphase flows inside the bioreactor, while algal cultures are also grown in the same reactor with the same experimental settings. The mixing characteristics of the multiphase flow are correlated with the algal growth performance in the bioreactors to elucidate the underlying physics to explore/optimize design paradigms for the optimization of photobioreactor designs for algae cultivation.

  5. THE RATE-INDEPENDENT CONSTITUTIVE MODELING FOR POROUS AND MULTI-PHASE NANOCRYSTALLINE MATERIAL

    Institute of Scientific and Technical Information of China (English)

    Zhou Jianqiu; Li Yuanling; Zhang Zhenzhong

    2007-01-01

    To determine the time-independent constitutive modeling for porous and multiphase nanocrystalline materials and understand the effects of grain size and porosity on their mechanical behavior, each phase was treated as a mixture of grain interior and grain boundary, and pores were taken as a single phase, then Budiansky's self-consistent method was used to calculate the Young's modulus of porous, possible multi-phase, nanocrystalline materials, the prediction being in good agreement with the results in the literature. Further, the established method is extended tosimulate the constitutive relations of porous and possible multi-phase nanocrystalline materials with small plastic deformation in conjunction with the secant-moduli approach and iso-strain assumption. Comparisons between the experimental grain size and porosity dependent mechanical data and the corresponding predictions using the established model show that it appears to be capable of describing the time-independent mechanical behaviors for porous and multi-phase nanocrystalline materials in a small plastic strain range. Further discussion on the modification factor, the advantages and limitations of the model developed were present.

  6. MULTI-REGION SEGMENTATION OF SAR IMAGE BY A MULTIPHASE LEVEL SET APPROACH

    Institute of Scientific and Technical Information of China (English)

    Fu Yusheng; Cao Zongjie; Pi Yiming

    2008-01-01

    In this letter, a multiphase level set approach unifying region and boundary-based infor- mation for multi-region segmentation of Synthetic Aperture Radar (SAR) image is presented. An energy functional that is applicable for SAR image segmentation is defined. It consists of two terms describing the local statistic characteristics and the gradient characteristics of SAR image respectively. A multiphase level set model that explicitly describes the different regions in one image is proposed. The purpose of such a multiphase model is not only to simplify the way of denoting multi-region by level set but also to guarantee the accuracy of segmentation. According to the presented multiphase model, the curve evolution equations with respect to edge curves are deduced. The multi-region segmentation is implemented by the numeric solution of the partial differential equations. The performance of the approach is verified by both simulation and real SAR images. The experiments show that the proposed algorithm reduces the speckle effect on segmentation and increases the boundary alignment accuracy, thus correctly divides the multi-region SAR image into different homogenous regions.

  7. On the mixture model for multiphase flow

    Energy Technology Data Exchange (ETDEWEB)

    Manninen, M.; Taivassalo, V. [VTT Energy, Espoo (Finland). Nuclear Energy; Kallio, S. [Aabo Akademi, Turku (Finland)

    1996-12-31

    Numerical flow simulation utilising a full multiphase model is impractical for a suspension possessing wide distributions in the particle size or density. Various approximations are usually made to simplify the computational task. In the simplest approach, the suspension is represented by a homogeneous single-phase system and the influence of the particles is taken into account in the values of the physical properties. This study concentrates on the derivation and closing of the model equations. The validity of the mixture model is also carefully analysed. Starting from the continuity and momentum equations written for each phase in a multiphase system, the field equations for the mixture are derived. The mixture equations largely resemble those for a single-phase flow but are represented in terms of the mixture density and velocity. The volume fraction for each dispersed phase is solved from a phase continuity equation. Various approaches applied in closing the mixture model equations are reviewed. An algebraic equation is derived for the velocity of a dispersed phase relative to the continuous phase. Simplifications made in calculating the relative velocity restrict the applicability of the mixture model to cases in which the particles reach the terminal velocity in a short time period compared to the characteristic time scale of the flow of the mixture. (75 refs.)

  8. Multiphasic interactions between nucleotides and target proteins

    CERN Document Server

    Nissen, Per

    2016-01-01

    The nucleotides guanosine tetraphosphate (ppGpp) and guanosine pentaphosphate (pppGpp) bind to target proteins to promote bacterial survival (Corrigan et al. 2016). Thus, the binding of the nucleotides to RsgA, a GTPase, inhibits the hydrolysis of GTP. The dose response, taken to be curvilinear with respect to the logarithm of the inhibitor concentration, is instead much better (P<0.001 when the 6 experiments are combined) represented as multiphasic, with high to exceedingly high absolute r values for the straight lines, and with transitions in the form of non-contiguities (jumps). Profiles for the binding of radiolabeled nucleotides to HprT and Gmk, GTP synthesis enzymes, were, similarly, taken to be curvilinear with respect to the logarithm of the protein concentration. However, the profiles are again much better represented as multiphasic than as curvilinear (the P values range from 0.047 to <0.001 for each of the 8 experiments for binding of ppGpp and pppGpp to HprT). The binding of GTP to HprT and ...

  9. Multiphase equation of state for iron

    Energy Technology Data Exchange (ETDEWEB)

    Kerley, G I

    1993-02-01

    The PANDA code is used to build a multiphase equation of state (EOS) table for iron. Separate EOS tables were first constructed for each of the individual phases. The phase diagram and multiphase EOS were then determined from the Helmholtz free energies. The model includes four solid phases ([alpha],[gamma], [delta], and [var epsilon]) and a fluid phase (including the liquid, vapor, and supercritical regions). The model gives good agreement with experimental thermophysical data, static compression data, phase boundaries, and shock-wave measurements. Contributions from thermal electronic excitation, computed from a quantum-statistical-mechanical model, were found to be very important. This EOS covers a wide range of densities (0--1000 g/cm[sup 3]) and temperatures (0--1.2[times]10[sup 7] K). It is also applicable to RHA steel. The new EOS is used in hydrocode simulations of plate impact experiments, a nylon ball impact on steel, and the shaped charge perforation of an RHA plate. The new EOS table can be accessed through the SNL-SESAME library as material number 2150.

  10. Multiphase forces on bend structures – critical gas fraction for transition single phase gas to multiphase flow behaviour

    NARCIS (Netherlands)

    Belfroid, S.P.C.; Nennie, E.D.; Lewis, M.

    2016-01-01

    Piping structures are generally subjected to high dynamic loading due to multiphase forces. In particular subsea structures are very vulnerable as large flexibility is required to cope for instance with thermal stresses. The forces due to multiphase flow are characterized by a broadband spectrum wit

  11. Multiphase forces on bend structures – critical gas fraction for transition single phase gas to multiphase flow behaviour

    NARCIS (Netherlands)

    Belfroid, S.P.C.; Nennie, E.D.; Lewis, M.

    2016-01-01

    Piping structures are generally subjected to high dynamic loading due to multiphase forces. In particular subsea structures are very vulnerable as large flexibility is required to cope for instance with thermal stresses. The forces due to multiphase flow are characterized by a broadband spectrum wit

  12. Convection in multiphase flows using Lattice Boltzmann methods

    CERN Document Server

    Biferale, L; Sbragaglia, M; Toschi, F

    2011-01-01

    We present high resolution numerical simulations of convection in multiphase flows (boiling) using a novel algorithm based on a Lattice Boltzmann method. We first validate the thermodynamical and kinematical properties of the algorithm. Then, we perform a series of 3d numerical simulations at changing the mean properties in the phase diagram and compare convection with and without phase coexistence at $Ra \\sim 10^7$. We show that in presence of nucleating bubbles non-Oberbeck Boussinesq effects develops, mean temperature profile becomes asymmetric, heat-transfer and heat-transfer fluctuations are enhanced. We also show that small-scale properties of velocity and temperature fields are strongly affected by the presence of buoyant bubble leading to high non-Gaussian profiles in the bulk.

  13. Pressure Relations and Vertical Equilibrium in the Turbulent, Multiphase ISM

    CERN Document Server

    Koyama, H

    2008-01-01

    We use numerical simulations of turbulent, multiphase, self-gravitating gas orbiting in model disk galaxies to study the relationships among pressure, the vertical gas distribution, and the ratio of dense to diffuse gas. We show that the disk height and mean midplane pressure are consistent with effective hydrostatic equilibrium, provided that the turbulent vertical velocity dispersion and gas self-gravity are included. Mass-weighted pressures are an order of magnitude higher than the midplane pressure because self-gravity concentrates gas and increases the pressure in clouds. We also investigate the ratio Rmol=M(H2)/M(HI) for our simulations. Blitz and Rosolowsky (2006) showed that Rmol is proportional to the estimated midplane pressure. For model series in which the epicyclic frequency, kappa, and gas surface density, Sigma, are proportional, we recover the empirical relation. For other model series in which kappa and Sigma are independent, the midplane pressure and Rmol are not well correlated. We conclude...

  14. Computational algorithms for multiphase magnetohydrodynamics and applications to accelerator targets

    Directory of Open Access Journals (Sweden)

    R.V. Samulyak

    2010-01-01

    Full Text Available An interface-tracking numerical algorithm for the simulation of magnetohydrodynamic multiphase/free surface flows in the low-magnetic-Reynolds-number approximation of (Samulyak R., Du J., Glimm J., Xu Z., J. Comp. Phys., 2007, 226, 1532 is described. The algorithm has been implemented in multi-physics code FronTier and used for the simulation of MHD processes in liquids and weakly ionized plasmas. In this paper, numerical simulations of a liquid mercury jet entering strong and nonuniform magnetic field and interacting with a powerful proton pulse have been performed and compared with experiments. Such a mercury jet is a prototype of the proposed Muon Collider/Neutrino Factory, a future particle accelerator. Simulations demonstrate the elliptic distortion of the mercury jet as it enters the magnetic solenoid at a small angle to the magnetic axis, jet-surface instabilities (filamentation induced by the interaction with proton pulses, and the stabilizing effect of the magnetic field.

  15. Effects of Bonding Phase on High Temperature Oxidation Behavior of SiC-based Multiphase Material%结合相对SiC基复相材料高温氧化行为的影响

    Institute of Scientific and Technical Information of China (English)

    王黎; 蒋明学; 尹洪峰; 陈盼军; 李波涛

    2012-01-01

    利用X-射线衍射仪、扫描电镜和热重分析仪等手段,在1100~1500℃研究了Sialon结合SiC复相材料的高温抗氧化行为.结果表明:随氧化温度升高,由于氧化致密层的形成,试样氧化增重速率降低,出现氧化钝化现象;Sialon结合SiC复相材料高温抗氧化性能优于Si3N4结合SiC复相材料;高温氧化使得SiC质复相材料常温抗压强度比氧化前提高;随氧化温度升高,Sialon结合SiC复相材料的氧化膜表面形成较多气泡和开口空洞,使耐压强度呈下降趋势;Si3N4结合SiC复相材料随氧化温度升高,耐压强度降低,这是由于冷却过程方石英化伴生的网状裂纹密度增大.%The high temperature oxidation behavior of two kinds of SiC-based multiphase material was investigated at 1100—1500 ℃ by X-ray diffractometer, scanning electronic microscopy and thermogravimetry. The results show that: the oxidation mass increment rate of the sample decreases with increasing oxidation temperature due to the formation of dense oxidation layer. The oxidation passivation occurs with the increase of oxidation temperature. The oxidation resistance of Sialon-bonded SiC multiphase material is superior to that of Si3N4-rbonded SiC multiphase material. The high temperature oxidation results in the increase of compressive strength at room temperature of SiC-based multiphase material compared with unoxidized sample. The compressive strength of Sialon-bonded SiC samples oxidized at high temperature decreases with the increase of oxidation temperature as a result of formation and burst of surface bubble. While the decrease of compressive strength of Si3N4-bonded SiC samples oxidized at high temperature can contribute to the increase of the consistency of net-like crack associating with cristobalite transformation during cooling.

  16. Supernova Feedback and Multiphase Interstellar Medium

    Science.gov (United States)

    Li, Miao; Ostriker, Jeremiah P.; Cen, Renyue; Bryan, Greg; Naab, Thorsten

    2015-01-01

    Without feedback, galaxies in cosmological simulations fail to generate outflows and tend to be too massive and too centrally concentrated, in contrast to the prominent disks observed ubiquitously in our universe. The nature of supernova (SN) feedback remains, however, highly uncertain, and most galaxy simulations so far adopt ad hoc models. Here we perform parsec-resolution simulations of a patch of the interstellar medium (ISM), and show that the unresolved multiphase gas in cosmological simulations can greatly affect the SN feedback by allowing blastwaves to travel in-between the clouds. We also show how ISM clumping varies with the mean gas density and SN rate encountered in real galactic environments. We emphasize that the inhomogeneity of the ISM must be considered in coarse-resolution simulations. We discuss how the gas pressure maintained by SN explosions can help to launch the galactic winds, and compare our results with the sub-grid models adopted in current cosmological simulations.

  17. Reactive Chemical Transport Under Multiphase System

    Science.gov (United States)

    Fang, Y.; Yeh, G.

    2001-12-01

    A numerical model, HYDROBIOGEOCHEM, is developed for modeling reactive chemical transport under multiphase flow systems. The chemistry part of this model is derived from BIOGEOCHEM, which is a general computer code that simulates biogeochemial processes from a reaction-based mechanistic point of view. To reduce primary dependent variables (PDVs), Gauss-Jordan decomposition is applied to the governing matrix equations for transport, resulting in mobile components and mobile kinetic variables as PDVs. Options of sequential iteration approach (SIA), predictor corrector and operator splitting method are incorporated in the code to make it versatile. The model is a practical tool for assessing migration of subsurface contamination and proper designing of remediation technologies. Examples are presented to demonstrate the capability of the new model.

  18. Identifying layers in random multiphase structures

    Science.gov (United States)

    Mader, Kevin; Stampanoni, Marco

    2016-01-01

    X-Ray microscopic methods, benefiting from the large penetration depth of X-rays in many materials, enable 3D investigation of a wide variety of samples. This allows for a wide variety of physical, chemical, and biological structures to be seen and explored, in some cases even in real time. Such measurements have lead to insights into paleontology, vulcanology, genetics, and material science. The ability to see and visualize complex systems can provide otherwise unobtainable information on structure, interactions, mechanical behavior, and evolution. The field has, however, led to a massive amount of new, heterogenous, difficult to process data. We present a general, model-free approach for characterizing multiphase 3D systems and show how the method can be applied to experimental X-ray microscopy data to better understand and quantify layer structure in two typical systems: investigation of layered fibers and clay samples.

  19. Gasificaton Transport: A Multiphase CFD Approach & Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Dimitri Gidaspow; Veeraya Jiradilok; Mayank Kashyap; Benjapon Chalermsinsuwan

    2009-02-14

    The objective of this project was to develop predictive theories for the dispersion and mass transfer coefficients and to measure them in the turbulent fluidization regime, using existing facilities. A second objective was to use our multiphase CFD tools to suggest optimized gasifier designs consistent with aims of Future Gen. We have shown that the kinetic theory based CFD codes correctly compute: (1) Dispersion coefficients; and (2) Mass transfer coefficients. Hence, the kinetic theory based CFD codes can be used for fluidized bed reactor design without any such inputs. We have also suggested a new energy efficient method of gasifying coal and producing electricity using a molten carbonate fuel cell. The principal product of this new scheme is carbon dioxide which can be converted into useful products such as marble, as is done very slowly in nature. We believe this scheme is a lot better than the canceled FutureGen, since the carbon dioxide is safely sequestered.

  20. Online recognition of the multiphase flow regime

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The key reasons that the present method cannot be used to solve the industrial multi- phase flow pattern recognition are clarified firstly. The prerequisite to realize the online recognition is proposed and recognition rules for partial flow pattern are obtained based on the massive experimental data. The standard templates for every flow regime feature are calculated with self-organization cluster algorithm. The multi-sensor data fusion method is proposed to realize the online recognition of multiphase flow regime with the pressure and differential pressure signals, which overcomes the severe influence of fluid flow velocity and the oil fraction on the recognition. The online recognition method is tested in the practice, which has less than 10 percent measurement error. The method takes advantages of high confidence, good fault tolerance and less requirement of single sensor performance.

  1. Multiphase Flow Dynamics 5 Nuclear Thermal Hydraulics

    CERN Document Server

    Kolev, Nikolay Ivanov

    2012-01-01

    The present Volume 5 of the successful book package "Multiphase Flow Dynamics" is devoted to nuclear thermal hydraulics which is a substantial part of nuclear reactor safety. It provides knowledge and mathematical tools for adequate description of the process of transferring the fission heat released in materials due to nuclear reactions into its environment. It step by step introduces into the heat release inside the fuel, temperature fields in the fuels, the "simple" boiling flow in a pipe described using ideas of different complexity like equilibrium, non equilibrium, homogeneity, non homogeneity. Then the "simple" three-fluid boiling flow in a pipe is described by gradually involving the mechanisms like entrainment and deposition, dynamic fragmentation, collisions, coalescence, turbulence. All heat transfer mechanisms are introduced gradually discussing their uncertainty. Different techniques are introduced like boundary layer treatments or integral methods. Comparisons with experimental data at each step...

  2. Multiphase flow dynamics 5 nuclear thermal hydraulics

    CERN Document Server

    Kolev, Nikolay Ivanov

    2015-01-01

    This Volume 5 of the successful book package "Multiphase Flow Dynamics" is devoted to nuclear thermal hydraulics which is a substantial part of nuclear reactor safety. It provides knowledge and mathematical tools for adequate description of the process of transferring the fission heat released in materials due to nuclear reactions into its environment. It step by step introduces into the heat release inside the fuel, temperature fields in the fuels, the "simple" boiling flow in a pipe described using ideas of different complexity like equilibrium, non equilibrium, homogeneity, non homogeneity. Then the "simple" three-fluid boiling flow in a pipe is described by gradually involving the mechanisms like entrainment and deposition, dynamic fragmentation, collisions, coalescence, turbulence. All heat transfer mechanisms are introduced gradually discussing their uncertainty. Different techniques are introduced like boundary layer treatments or integral methods. Comparisons with experimental data at each step demons...

  3. Multiphasic MDCT in small bowel volvulus

    Energy Technology Data Exchange (ETDEWEB)

    Feng Shiting, E-mail: fst1977@163.com [Department of Radiology, The First Affiliated Hospital, Sun Yat-Sen University, 58th The Second Zhongshan Road, Guangzhou 510080 (China); Chan Tao, E-mail: taochan@hku.hk [Department of Diagnostic Radiology, University of Hong Kong, Room 406, Block K, Queen Mary Hospital (Hong Kong); Sun Canhui, E-mail: canhuisun@sina.com [Department of Radiology, The First Affiliated Hospital, Sun Yat-Sen University, 58th The Second Zhongshan Road, Guangzhou 510080 (China); Li Ziping, E-mail: liziping163@tom.com [Department of Radiology, The First Affiliated Hospital, Sun Yat-Sen University, 58th The Second Zhongshan Road, Guangzhou 510080 (China); Guo Huanyi, E-mail: guohuanyi@163.com [Department of Radiology, The First Affiliated Hospital, Sun Yat-Sen University, 58th The Second Zhongshan Road, Guangzhou 510080 (China); Yang Guangqi, E-mail: shwy03@126.com [Department of Radiology, The First Affiliated Hospital, Sun Yat-Sen University, 58th The Second Zhongshan Road, Guangzhou 510080 (China); Peng Zhenpeng, E-mail: ppzhen@21cn.com [Department of Radiology, The First Affiliated Hospital, Sun Yat-Sen University, 58th The Second Zhongshan Road, Guangzhou 510080 (China); Meng Quanfei, E-mail: mzycoco@gmail.com [Department of Radiology, The First Affiliated Hospital, Sun Yat-Sen University, 58th The Second Zhongshan Road, Guangzhou 510080 (China)

    2010-11-15

    Objective: Evaluate the use of MDCT with 3D CT angiography (CTA) and CT portal venography (CTPV) reconstruction for the diagnosis of small bowel volvulus (SBV). Methods: Multiphasic MDCT findings in nine patients (seven males and two females, age range 2-70) with surgically proven SBV were retrospectively reviewed. Non-contrast and double phase contrast enhanced MDCT including 3D CTA and CTPV reconstruction were performed in all the patients. Two experienced abdominal radiologists evaluated the images and defined the location, direction and degree of SBV. Results: On axial MDCT images, all cases show segmental or global dilatation of small intestine. Other findings include circumferential bowel wall thickening in eight cases, halo appearance and hyperemia in seven cases, whirl sign in six cases, beak-like appearance in six cases, closed loops in six cases and ascites in one case. CTA/CTPV showed abnormal courses involving main trunks of superior mesenteric artery (SMA) and superior mesenteric vein (SMV) in seven cases, with or without distortion of their tributaries. Normal course of SMA but abnormal course of SMV was seen in the other two cases. Of all the nine cases, whirl sign was seen in six cases and barber's pole sign in five cases. Dilated SMV was observed in eight cases and abrupt termination of SMA was found in one case. Compared with surgical findings, the location, direction and degree of SBV were correctly estimated in all cases based on CTA/CTPV. Conclusion: Multiphasic MDCT with CTA/CTPV reconstruction can play an important role in the diagnosis of SBV. The location, direction and degree of SBV can all be defined preoperatively using this method.

  4. Investigation of Gas and Liquid Multiphase Flow in the Rheinsahl-Heraeus (RH) Reactor by Using the Euler-Euler Approach

    Science.gov (United States)

    Chen, Gujun; He, Shengping; Li, Yugang; Guo, Yintao; Wang, Qian

    2016-08-01

    In the present work, a mathematical model was developed to understand the multiphase flow behavior in a Rheinsahl-Heraeus (RH) reactor by using the Euler-Euler approach, and the effects of initial bubble diameter, nonequilibrium expansion of bubble caused by sudden thermal effect and sharp pressure drop, and various interphase forces were considered and clarified. The simulation results of mixing time, liquid circulation rate, and local liquid velocity in RH agree well with the measured results. The result indicates that the initial bubble diameter has a weak impact on the multiphase flow but that the bubble expansion has a tremendous impact on it for an actual RH. Meanwhile, the drag force and turbulent dispersion force strongly influence the multiphase flow, whereas the lift force and virtual mass force only have negligible influence on it. Furthermore, the turbulent dispersion force should be responsible for reasonable prediction of multiphase flow behavior in the RH reactor.

  5. 2nd International Conference on Multiphase Flow - ICMF '95

    CERN Document Server

    Fukano, T; Bataille, Jean

    1995-01-01

    There is increasing world-wide interest in obtaining an understanding of various multiphase flow phenomena and problems in terms of a common language of multiphase flow. This volume contains state-of-the-art papers which have been contributed from all over the world by experts working on all aspects of multiphase flows. The volume also highlights international technology-sharing in the fields of energy, environment and public health, in order to create a brighter and sustainable future for man and for all life in the next century. It is intended that this volume will serve as a major source of

  6. Multiphase Flow and Fluidization Continuum and Kinetic Theory Descriptions

    CERN Document Server

    Gidaspow, Dimitri

    1994-01-01

    Useful as a reference for engineers in industry and as an advanced level text for graduate engineering students, Multiphase Flow and Fluidization takes the reader beyond the theoretical to demonstrate how multiphase flow equations can be used to provide applied, practical, predictive solutions to industrial fluidization problems. Written to help advance progress in the emerging science of multiphase flow, this book begins with the development of the conservation laws and moves on through kinetic theory, clarifying many physical concepts (such as particulate viscosity and solids pressure) and i

  7. Direct Numerical Simulation of Boiling Multiphase Flows: State-of-the-Art, Modeling, Algorithmic and Computer Needs

    Energy Technology Data Exchange (ETDEWEB)

    Nourgaliev R.; Knoll D.; Mousseau V.; Berry R.

    2007-04-01

    The state-of-the-art for Direct Numerical Simulation (DNS) of boiling multiphase flows is reviewed, focussing on potential of available computational techniques, the level of current success for their applications to model several basic flow regimes (film, pool-nucleate and wall-nucleate boiling -- FB, PNB and WNB, respectively). Then, we discuss multiphysics and multiscale nature of practical boiling flows in LWR reactors, requiring high-fidelity treatment of interfacial dynamics, phase-change, hydrodynamics, compressibility, heat transfer, and non-equilibrium thermodynamics and chemistry of liquid/vapor and fluid/solid-wall interfaces. Finally, we outline the framework for the {\\sf Fervent} code, being developed at INL for DNS of reactor-relevant boiling multiphase flows, with the purpose of gaining insight into the physics of multiphase flow regimes, and generating a basis for effective-field modeling in terms of its formulation and closure laws.

  8. Development of predictive simulation capability for reactive multiphase flow

    Energy Technology Data Exchange (ETDEWEB)

    VanderHeyden, W.B.; Kendrick, B.K.

    1998-12-31

    This is the final report of a Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The objective of the project was to develop a self-sustained research program for advanced computer simulation of industrial reactive multiphase flows. The prototype research problem was a three-phase alumina precipitator used in the Bayer process, a key step in aluminum refining. Accomplishments included the development of an improved reaction mechanism of the alumina precipitation growth process, the development of an efficient methods for handling particle size distribution in multiphase flow simulation codes, the incorporation of precipitation growth and agglomeration kinetics in LANL's CFDLIB multiphase flow code library and the evaluation of multiphase turbulence closure models for bubbly flow simulations.

  9. A multi-phase algorithm for a joint lot-sizing and pricing problem with stochastic demands

    DEFF Research Database (Denmark)

    Jenny Li, Hongyan; Thorstenson, Anders

    2014-01-01

    item over a finite multi-period planning horizon. Thece-dependent demands. The stochastic demand is captured by the scenario analysis approach, and this leads to a multiple-stage stochastic programming problem. Given the complexity of the stochastic programming problem, it is hard to determine optimal...... prices and lot sizes simultaneously. Therefore, we decompose the joint lot-sizing and pricing problem with stochastic demands and capacity constraints into a multi-phase decision process. In each phase, we solve the associated sub-problem to optimality. The decomposed decision process corresponds...... that the multi-phase heuristic algorithm solves the example problems effectively....

  10. Efficient computations for multiphase flow problems using coupled lattice Boltzmann-level set methods

    OpenAIRE

    Safi, Seyed Mohammad Amin

    2016-01-01

    Multiphase flow simulations benefit a variety of applications in science and engineering as for example in the dynamics of bubble swarms in heat exchangers and chemical reactors or in the prediction of the effects of droplet or bubble impacts in the design of turbomachinery systems. Despite all the progress in the modern computational fluid dynamics (CFD), such simulations still present formidable challenges both from numerical and computational cost point of view. Emerging as ...

  11. INVESTIGATION OF MULTIPHASE-REINFORCED Si3N4 COMPOSITE MATERIAL

    Institute of Scientific and Technical Information of China (English)

    曾鸣; 丁博; 郭梦熊

    1995-01-01

    By means of whisker reinforce and paricle dispersion, the routes of property improvement on Si3N4 ceramic material have been studied. The mecihaniacl properties of Siw/Si3N4 and Siw/Si3N4TiC material was compared, which proved that multiphase reinforce had overlap effect. Microstructure of the material was investigated by means of SEM and the mechanisms of SiCw and TiCP reinforces had been disussed.

  12. Fundamentals of Turbulent and Multi-Phase Combustion

    CERN Document Server

    Kuo, Kenneth Kuan-yun

    2012-01-01

    Detailed coverage of advanced combustion topics from the author of Principles of Combustion, Second Edition Turbulence, turbulent combustion, and multiphase reacting flows have become major research topics in recent decades due to their application across diverse fields, including energy, environment, propulsion, transportation, industrial safety, and nanotechnology. Most of the knowledge accumulated from this research has never been published in book form-until now. Fundamentals of Turbulent and Multiphase Combustion presents up-to-date, integrated coverage of the fundamentals of turbulence

  13. Numerical simulation of multiphase cavitating flows around an underwater projectile

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The present simulation investigates the multiphase cavitating flow around an underwater projectile.Based on the Homogeneous Equilibrium Flow assumption,a mixture model is applied to simulate the multiphase cavitating flow including ventilated cavitation caused by air injection as well as natural cavitation that forms in a region where the pressure of liquid falls below its vapor pressure. The transport equation cavitating model is applied.The calculations are executed based on a suite of CFD code.The hyd...

  14. Numerical Analysis of Velocity Dispersion in Multi-Phase Fluid-Saturated Porous Rocks

    Science.gov (United States)

    Chen, Xuehua; Zhong, Wenli; Gao, Gang; Zou, Wen; He, Zhenhua

    2017-03-01

    Seismic waves are subject to velocity dispersion when they propagate in fluid-saturated porous media. In this work, we explore the velocity dispersion behavior of P- and SV-waves in multi-phase fluid-saturated porous reservoirs while taking into account the effects of multi-phase pore fluids on the effective viscosities that control the wave-induced fluid flow. The effective viscosities associated with the hydrocarbon saturation of a synthetic sandstone reservoir saturated with different pore fluid mixtures are calculated using the Refutas model. We then analyze the frequency-dependent velocity, dispersion variation rate and characteristic frequency for different fluid saturation cases by employing Chapman's dynamic equivalent-medium theory. The results demonstrate that the hydrocarbon proportions and types in multi-phase mixed pore fluids significantly affect the magnitude and characteristic frequencies of velocity dispersion features for both the P- and S-waves. The dispersion anomalies of SV-waves are in general larger than those of the P-waves. This indicates that the velocity dispersion anomalies of SV-waves are equally sensitive to fluid saturation as the P-waves and should not be neglected. The velocities at lower frequencies (e.g., 10 and 100 Hz) within the seismic frequency range show a more remarkable decrease with increasing hydrocarbon proportion than those at higher frequency (1000 Hz). The numerical examples help to improve the understanding of the frequency-dependent AVO inversion from seismic reflection data.

  15. Numerical Analysis of Velocity Dispersion in Multi-Phase Fluid-Saturated Porous Rocks

    Science.gov (United States)

    Chen, Xuehua; Zhong, Wenli; Gao, Gang; Zou, Wen; He, Zhenhua

    2016-12-01

    Seismic waves are subject to velocity dispersion when they propagate in fluid-saturated porous media. In this work, we explore the velocity dispersion behavior of P- and SV-waves in multi-phase fluid-saturated porous reservoirs while taking into account the effects of multi-phase pore fluids on the effective viscosities that control the wave-induced fluid flow. The effective viscosities associated with the hydrocarbon saturation of a synthetic sandstone reservoir saturated with different pore fluid mixtures are calculated using the Refutas model. We then analyze the frequency-dependent velocity, dispersion variation rate and characteristic frequency for different fluid saturation cases by employing Chapman's dynamic equivalent-medium theory. The results demonstrate that the hydrocarbon proportions and types in multi-phase mixed pore fluids significantly affect the magnitude and characteristic frequencies of velocity dispersion features for both the P- and S-waves. The dispersion anomalies of SV-waves are in general larger than those of the P-waves. This indicates that the velocity dispersion anomalies of SV-waves are equally sensitive to fluid saturation as the P-waves and should not be neglected. The velocities at lower frequencies (e.g., 10 and 100 Hz) within the seismic frequency range show a more remarkable decrease with increasing hydrocarbon proportion than those at higher frequency (1000 Hz). The numerical examples help to improve the understanding of the frequency-dependent AVO inversion from seismic reflection data.

  16. Supertoughened renewable PLA reactive multiphase blends system: phase morphology and performance.

    Science.gov (United States)

    Zhang, Kunyu; Nagarajan, Vidhya; Misra, Manjusri; Mohanty, Amar K

    2014-08-13

    Multiphase blends of poly(lactic acid) (PLA), ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) terpolymer, and a series of renewable poly(ether-b-amide) elastomeric copolymer (PEBA) were fabricated through reactive melt blending in an effort to improve the toughness of the PLA. Supertoughened PLA blend showing impact strength of ∼500 J/m with partial break impact behavior was achieved at an optimized blending ratio of 70 wt % PLA, 20 wt % EMA-GMA, and 10 wt % PEBA. Miscibility and thermal behavior of the binary blends PLA/PEBA and PLA/EMA-GMA, and the multiphase blends were also investigated through differential scanning calorimetric (DSC) and dynamic mechanical analysis (DMA). Phase morphology and fracture surface morphology of the blends were studied through scanning electron microscopy (SEM) and atomic force microscopy (AFM) to understand the strong corelation between the morphology and its significant effect on imparting tremendous improvement in toughness. A unique "multiple stacked structure" with partial encapsulation of EMA-GMA and PEBA minor phases was observed for the PLA/EMA-GMA/PEBA (70/20/10) revealing the importance of particular blend composition in enhancing the toughness. Toughening mechanism behind the supertoughened PLA blends have been established by studying the impact fractured surface morphology at different zones of fracture. Synergistic effect of good interfacial adhesion and interfacial cavitations followed by massive shear yielding of the matrix was believed to contribute to the enormous toughening effect observed in these multiphase blends.

  17. Investigation on Reaction Synthesis of Sialon Multiphase Refractory from Clay and Additive TiO2

    Institute of Scientific and Technical Information of China (English)

    XULihua; QIANYangbo; 等

    2001-01-01

    Sialon multiphase composites containting titanium-carbon or titanium-nitrogen have been synthesized from clay nd additive titania through different sintering processes,The experimental results indicated that there was a great change of crystal phase in the similar-composition specimens singtering in air ,nitrogen and bedding protecive poder respectively,determined by XRD analysis,The subsequent evidences were also supplied by SEM.The improvement in mehanical properties of multiphase refracto-ries was observed as the amount of titania changing from 0 to 16%,The main causes maybe come from the excellent properties of high hardness and in-situ strengthening effects of the in-situ formed secondary phase,TiC or TiN.

  18. Smoothed dissipative particle dynamics model for mesoscopic multiphase flows in the presence of thermal fluctuations

    Science.gov (United States)

    Lei, Huan; Baker, Nathan A.; Wu, Lei; Schenter, Gregory K.; Mundy, Christopher J.; Tartakovsky, Alexandre M.

    2016-08-01

    Thermal fluctuations cause perturbations of fluid-fluid interfaces and highly nonlinear hydrodynamics in multiphase flows. In this work, we develop a multiphase smoothed dissipative particle dynamics (SDPD) model. This model accounts for both bulk hydrodynamics and interfacial fluctuations. Interfacial surface tension is modeled by imposing a pairwise force between SDPD particles. We show that the relationship between the model parameters and surface tension, previously derived under the assumption of zero thermal fluctuation, is accurate for fluid systems at low temperature but overestimates the surface tension for intermediate and large thermal fluctuations. To analyze the effect of thermal fluctuations on surface tension, we construct a coarse-grained Euler lattice model based on the mean field theory and derive a semianalytical formula to directly relate the surface tension to model parameters for a wide range of temperatures and model resolutions. We demonstrate that the present method correctly models dynamic processes, such as bubble coalescence and capillary spectra across the interface.

  19. Online Slug Detection in Multi-phase Transportation Pipelines Using Electrical Tomography

    DEFF Research Database (Denmark)

    Pedersen, Simon; Mai, Christian; Hansen, Leif

    2015-01-01

    Slugging flow in offshore oil & gas multi-phase transportation pipelines cause big challenges as the flow regime induces flow and pressure oscillations in the multi-phase pipelines. The negative impacts of the most severe slugs are significant and thus the elimination of slugging flow....... Based on the results the study concludes that the ERT is able to detect the slug very well when the oil and water is well mixed. Furthermore the traditional pressure transmitters have the limitation that pressure variations can be caused by other operating conditions than slug, such as change...... in the back pressure from control valves. The biggest limitation using ERT is the lack of ability to distinguish between gas and oil, and thus the ERT can only be used as an effective slug detect measurement when the oil-to-water ratio is low....

  20. Smoothed dissipative particle dynamics model for mesoscopic multiphase flows in the presence of thermal fluctuations

    Energy Technology Data Exchange (ETDEWEB)

    Lei, Huan; Baker, Nathan A.; Wu, Lei; Schenter, Gregory K.; Mundy, Christopher J.; Tartakovsky, Alexandre M.

    2016-08-05

    Thermal fluctuations cause perturbations of fluid-fluid interfaces and highly nonlinear hydrodynamics in multiphase flows. In this work, we develop a novel multiphase smoothed dissipative particle dynamics model. This model accounts for both bulk hydrodynamics and interfacial fluctuations. Interfacial surface tension is modeled by imposing a pairwise force between SDPD particles. We show that the relationship between the model parameters and surface tension, previously derived under the assumption of zero thermal fluctuation, is accurate for fluid systems at low temperature but overestimates the surface tension for intermediate and large thermal fluctuations. To analyze the effect of thermal fluctuations on surface tension, we construct a coarse-grained Euler lattice model based on the mean field theory and derive a semi-analytical formula to directly relate the surface tension to model parameters for a wide range of temperatures and model resolutions. We demonstrate that the present method correctly models the dynamic processes, such as bubble coalescence and capillary spectra across the interface.

  1. Fluctuation-induced dynamics of multiphase liquid jets with ultra-low interfacial tension

    CERN Document Server

    Sauret, Alban; Shum, Ho Cheung

    2013-01-01

    Control of fluid dynamics at the micrometer scale is essential to emulsion science and materials design, which is ubiquitous in everyday life and is frequently encountered in industrial applications. Most studies on multiphase flow focus on oil-water systems with substantial interfacial tension. Advances in microfluidics have enabled the study of multiphase flow with more complex dynamics. Here, we show that the evolution of the interface in a jet surrounded by a co-flowing continuous phase with an ultra-low interfacial tension presents new opportunities to the control of flow morphologies. The introduction of a harmonic perturbation to the dispersed phase leads to the formation of interfaces with unique shapes. The periodic structures can be tuned by controlling the fluid flow rates and the input perturbation; this demonstrates the importance of the inertial effects in flow control at ultra-low interfacial tension. Our work provides new insights into microfluidic flows at ultra-low interfacial tension and th...

  2. Simulation of Subsurface Multiphase Contaminant Extraction Using a Bioslurping Well Model

    Energy Technology Data Exchange (ETDEWEB)

    Matos de Souza, Michelle; Oostrom, Mart; White, Mark D.; Cardoso da Silva, Gerson; Barbosa, Maria Claudia

    2016-07-12

    Subsurface simulation of multiphase extraction from wells is notoriously difficult. Explicit representation of well geometry requires small grid resolution, potentially leading to large computational demands. To reduce the problem dimensionality, multiphase extraction is mostly modeled using vertically-averaged approaches. In this paper, a multiphase well model approach is presented as an alternative to simplify the application. The well model, a multiphase extension of the classic Peaceman model, has been implemented in the STOMP simulator. The numerical solution approach accounts for local conditions and gradients in the exchange of fluids between the well and the aquifer. Advantages of this well model implementation include the option to simulate the effects of well characteristics and operation. Simulations were conducted investigating the effects of extraction location, applied vacuum pressure, and a number of hydraulic properties. The obtained results were all consistent and logical. A major outcome of the test simulations is that, in contrast with common recommendations to extract from either the gas-NAPL or the NAPL-aqueous phase interface, the optimum extraction location should be in between these two levels. The new model implementation was also used to simulate extraction at a field site in Brazil. The simulation shows a good match with the field data, suggesting that the new STOMP well module may correctly represent oil removal. The field simulations depend on the quality of the site conceptual model, including the porous media and contaminant properties and the boundary and extraction conditions adopted. The new module may potentially be used to design field applications and analyze extraction data.

  3. CFD-DP Modeling of Multiphase Flow in Dense Medium Cyclone

    Directory of Open Access Journals (Sweden)

    Okan Topcu

    2012-03-01

    Full Text Available A numerical study of the gas-liquid-solid multi-phase flow in a hydrocyclone is summarized in this paper. The turbulent flow of the gas and the liquid is modelled using the realizable k-epsilon turbulence model, the interface between the liquid and the air core is modelled using the Eulerian multi-phase model and the simulation of the particle flow described by the dense discrete phase model in which the data of the multi-phase flow are used. Separation efficiency, particle trajectories, split ratios, flow field and pressure drop are the examined flow features. The results show that the flow fields in the hydrocyclones are possible to simulate by realizable k-epsilon model which is a fast solver for turbulent flows. The cut size is achieved between 3 and 15 µm. The air-core development is observed to be a transport effect due to the velocity of surrounding fluid rather than a pressure effect. The approach offers a useful method to observe the flow of a hydrocyclone in relation to design of the system and operational conditions.

  4. High-Fidelity Generalization Method of Cells for Inelastic Periodic Multiphase Materials

    Science.gov (United States)

    Aboudi, Jacob; Pindera, Marek-Jerzy; Arnold, Steven M.

    2002-01-01

    An extension of a recently-developed linear thermoelastic theory for multiphase periodic materials is presented which admits inelastic behavior of the constituent phases. The extended theory is capable of accurately estimating both the effective inelastic response of a periodic multiphase composite and the local stress and strain fields in the individual phases. The model is presently limited to materials characterized by constituent phases that are continuous in one direction, but arbitrarily distributed within the repeating unit cell which characterizes the material's periodic microstructure. The model's analytical framework is based on the homogenization technique for periodic media, but the method of solution for the local displacement and stress fields borrows concepts previously employed by the authors in constructing the higher-order theory for functionally graded materials, in contrast with the standard finite-element solution method typically used in conjunction with the homogenization technique. The present approach produces a closed-form macroscopic constitutive equation for a periodic multiphase material valid for both uniaxial and multiaxial loading. The model's predictive accuracy in generating both the effective inelastic stress-strain response and the local stress said inelastic strain fields is demonstrated by comparison with the results of an analytical inelastic solution for the axisymmetric and axial shear response of a unidirectional composite based on the concentric cylinder model, and with finite-element results for transverse loading.

  5. Quantitative tomographic measurements of opaque multiphase flows

    Energy Technology Data Exchange (ETDEWEB)

    GEORGE,DARIN L.; TORCZYNSKI,JOHN R.; SHOLLENBERGER,KIM ANN; O' HERN,TIMOTHY J.; CECCIO,STEVEN L.

    2000-03-01

    An electrical-impedance tomography (EIT) system has been developed for quantitative measurements of radial phase distribution profiles in two-phase and three-phase vertical column flows. The EIT system is described along with the computer algorithm used for reconstructing phase volume fraction profiles. EIT measurements were validated by comparison with a gamma-densitometry tomography (GDT) system. The EIT system was used to accurately measure average solid volume fractions up to 0.05 in solid-liquid flows, and radial gas volume fraction profiles in gas-liquid flows with gas volume fractions up to 0.15. In both flows, average phase volume fractions and radial volume fraction profiles from GDT and EIT were in good agreement. A minor modification to the formula used to relate conductivity data to phase volume fractions was found to improve agreement between the methods. GDT and EIT were then applied together to simultaneously measure the solid, liquid, and gas radial distributions within several vertical three-phase flows. For average solid volume fractions up to 0.30, the gas distribution for each gas flow rate was approximately independent of the amount of solids in the column. Measurements made with this EIT system demonstrate that EIT may be used successfully for noninvasive, quantitative measurements of dispersed multiphase flows.

  6. Multiphase flow metering: 4 years on

    Energy Technology Data Exchange (ETDEWEB)

    Falcone, G.; Hewitt, G.F.; Alimonti, C.; Harrison, B.

    2005-07-01

    Since the authors' last review in 2001 [1], the use of Multiphase Flow Metering (MFM) within the oil and gas industry continues to grow apace, being more popular in some parts of the world than others. Since the early 1990's, when the first commercial meters started to appear, there have been more than 1,600 field applications of MFM for field allocation, production optimisation and mobile well testing. As the authors predicted, wet gas metering technology has improved to such an extent that its use has rapidly increased worldwide. A ''who's who'' of the MFM sector is provided, which highlights the mergers in the sector and gives an insight into the meters and measurement principles available today. Cost estimates, potential benefits and reliability in the field of the current MFM technologies are revisited and brought up to date. Several measurements technologies have resurfaced, such as passive acoustic energy patterns, infrared wavelengths, Nuclear Magnetic Resonance (NMR) and Electrical Capacitance Tomography (ECT), and they are becoming commercial. The concept of ''virtual metering'', integrated with ''classical MFM'', is now widely accepted. However, sometimes the principles of the MFM measurements themselves are forgotten, submerged in the sales and marketing hype. (author) (tk)

  7. Dan Joseph's contributions to disperse multiphase flow

    Science.gov (United States)

    Prosperetti, Andrea

    2012-11-01

    During his distinguished career, Dan Joseph worked on a vast array of problems. One of these, which occupied him off and on over the last two decades of his life, was that of flows with suspended finite-size particles at finite Reynolds numbers. He realized early on that progress in this field had to rely on the insight gained from numerical simulation, an area in which he was a pioneer. On the basis of the early numerical results he recognized the now famous ``drafting, kissing and tumbling'' mechanism of particle-particle interaction, the possibility of fluidization by lift and many others. With a number of colleagues and a series of gifted students he produced a significant body of work summarized in his on-line book Interrogations of Direct Numerical Simulation of Solid-Liquid Flows available from http://www.efluids.com/efluids/books/joseph.htm. This presentation will describe Joseph's contribution to the understanding of disperse multiphase flow and conclude with some examples from the author's recent work in this area. Supported by NSF.

  8. 多相流动状态下温度对X70钢CO2腐蚀的影响%Effects of Temperature on CO2 Corrosion of X70 Steel under Multiphase Flow Condition

    Institute of Scientific and Technical Information of China (English)

    封子艳; 强超; 杨志刚; 朱世东; 魏彦林; 崔铭伟

    2016-01-01

    目的:提高多相流动状态下温度对X70钢CO2腐蚀机理的认识。方法采用自制实验装置和挂片实验,模拟起伏管路段塞流动条件下X70钢的CO2腐蚀状态,通过电子显微镜和电化学在线监测等手段对试样表面形貌、腐蚀速率以及在线腐蚀情况进行观察和分析,侧重研究多相流动状态下温度对X70钢CO2腐蚀速率的影响。结果当温度达到90~98℃时,由于腐蚀产物膜的影响,CO2分压对腐蚀速度影响甚微,腐蚀速度降至较低水平。当温度在60~80℃之间时,腐蚀挂片表面的腐蚀状态不稳定,出现局部腐蚀或均匀腐蚀,当CO2分压较低时(如0.15 MPa),易形成均匀腐蚀;当CO2分压较高时(如0.6 MPa),易形成局部腐蚀。当温度在40~80℃之间时,随着CO2分压的增加,腐蚀速率达到最高值的温度越来越高,腐蚀速率达到最高值的温度范围一般保持在40~80℃之间。结论温度对X70钢CO2腐蚀的影响与CO2分压密切相关,相同温度下,随着CO2分压的增加,腐蚀速率增大,相应的腐蚀速率达到最高值的温度也越来越高;孤立地说某一温度值下,CO2腐蚀速率达到最高值这一说法不准确。%ABSTRACT:Objective To improve the understanding of CO2 corrosion mechanism at different temperature under multiphase flow condition. Methods The CO2 corrosion status of X70 steel under the condition of plug flow was simulated using the self-made ex-perimental device and the hanging plate experiment. The surface morphology, corrosion rate and online coupon corrosion situation were observed and analyzed by electron microscopy and electrochemical monitoring. The effect of temperature on the CO2 corrosion rate of X70 steel was focused on. Results The CO2 partial pressure had little effect on the corrosion rate, and the corrosion rate de-creased to a lower level when the temperature reached 90~98℃, due to the influence of corrosion product film;when the temper-ature was in the range

  9. Impact of nongray multiphase radiation in pulverized coal combustion

    Science.gov (United States)

    Roy, Somesh; Wu, Bifen; Modest, Michael; Zhao, Xinyu

    2016-11-01

    Detailed modeling of radiation is important for accurate modeling of pulverized coal combustion. Because of high temperature and optical properties, radiative heat transfer from coal particles is often more dominant than convective heat transfer. In this work a multiphase photon Monte Carlo radiation solver is used to investigate and to quantify the effect of nongray radiation in a laboratory-scale pulverized coal flame. The nongray radiative properties of carrier phase (gas) is modeled using HITEMP database. Three major species - CO, CO2, and H2O - are treated as participating gases. Two optical models are used to evaluate radiative properties of coal particles: a formulation based on the large particle limit and a size-dependent correlation. Effect of scattering due to coal particle is also investigated using both isotropic scattering and anisotropic scattering using a Henyey-Greenstein function. Lastly, since the optical properties of ash is very different from that of coal, the effect of ash content on the radiative properties of coal particle is examined. This work used Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation Grant Number ACI-1053575.

  10. Dynamic dielectrophoresis model of multi-phase ionic fluids.

    Directory of Open Access Journals (Sweden)

    Ying Yan

    Full Text Available Ionic-based dielectrophoretic microchips have attracted significant attention due to their wide-ranging applications in electro kinetic and biological experiments. In this work, a numerical method is used to simulate the dynamic behaviors of ionic droplets in a microchannel under the effect of dielectrophoresis. When a discrete liquid dielectric is encompassed within a continuous fluid dielectric placed in an electric field, an electric force is produced due to the dielectrophoresis effect. If either or both of the fluids are ionic liquids, the magnitude and even the direction of the force will be changed because the net ionic charge induced by an electric field can affect the polarization degree of the dielectrics. However, using a dielectrophoresis model, assuming ideal dielectrics, results in significant errors. To avoid the inaccuracy caused by the model, this work incorporates the electrode kinetic equation and defines a relationship between the polarization charge and the net ionic charge. According to the simulation conditions presented herein, the electric force obtained in this work has an error exceeding 70% of the actual value if the false effect of net ionic charge is not accounted for, which would result in significant issues in the design and optimization of experimental parameters. Therefore, there is a clear motivation for developing a model adapted to ionic liquids to provide precise control for the dielectrophoresis of multi-phase ionic liquids.

  11. Fracture strength, failure type and Weibull characteristics of lithium disilicate and multiphase resin composite endocrowns under axial and lateral forces

    NARCIS (Netherlands)

    Gresnigt, Marco M M; Özcan, Mutlu; van den Houten, Mieke L A; Schipper, Laura; Cune, Marco S

    2016-01-01

    OBJECTIVE: Multiphase resin composite materials have been advocated as an alternative to reinforced ceramics but limited information is available to date on their stability. This in vitro study evaluated the effect of axial and lateral forces on the strength of endocrowns made of Li2Si2O5 and multip

  12. Effect of sintering temperature on properties of porous TiB_2-TiC multiphase ceramics%烧结温度对制备多孔TiB_2-TiC复相陶瓷性能的影响

    Institute of Scientific and Technical Information of China (English)

    谢继峰; 曹顺华; 张秀芳; 李文超

    2009-01-01

    In order to attain porous TiB_2-TiC multiphase ceramics, reactive sintering was carried out at different temperature to study the effect of temperature on the density, air permeability and mechanical properties of porous TiB_2-TiC multiphase ceramics. XRD was used to analysis phases composition of the sinters. The result indicates that TiB_2 and TiC are the final products when reaction finishs at 1 300℃ . With the rising of sintering temperature, the density and transverse rupture strength of all the specimens increase all the while, maximum aperture and the gas permeability decrease gradually. The porous TiB_2-TiC multiphase ceramics were prepared by sintering at 1 700℃ for 1h and its density,open porosity and transverse rupture strength at room temperature are 3. 2g/cm~3,29. 5% ,120MPa, respectively.%为了获得孔隙度为(30±5)%TiB_2-TiC复相陶瓷,采用反应烧结法,在不同温度下进行真空烧结制备出多孔TiB_2-TiC复相陶瓷.主要研究了烧结温度对样品的密度、透气性和力学性能的影响,并对反应过程中样品的相组成进行了分析.试验结果表明:反应过程于1 000℃开始,于1 300℃结束;反应过程中存在TiB、Ti_3B_4中间相,反应完成后最终产物只有TiB_2和TiC两相.随着烧结温度的升高,样品的密度和抗弯强度均是逐渐增大的,最大孔径和相对透气系数则是逐步降低的.于1 700℃烧结制备出的复相陶瓷的密度为3.2g/cm~3、开孔隙度为29.5%、抗弯强度达到了120MPa,达到了预期目标.

  13. Reentry trajectory optimization with waypoint and no-fly zone constraints using multiphase convex programming

    Science.gov (United States)

    Zhao, Dang-Jun; Song, Zheng-Yu

    2017-08-01

    This study proposes a multiphase convex programming approach for rapid reentry trajectory generation that satisfies path, waypoint and no-fly zone (NFZ) constraints on Common Aerial Vehicles (CAVs). Because the time when the vehicle reaches the waypoint is unknown, the trajectory of the vehicle is divided into several phases according to the prescribed waypoints, rendering a multiphase optimization problem with free final time. Due to the requirement of rapidity, the minimum flight time of each phase index is preferred over other indices in this research. The sequential linearization is used to approximate the nonlinear dynamics of the vehicle as well as the nonlinear concave path constraints on the heat rate, dynamic pressure, and normal load; meanwhile, the convexification techniques are proposed to relax the concave constraints on control variables. Next, the original multiphase optimization problem is reformulated as a standard second-order convex programming problem. Theoretical analysis is conducted to show that the original problem and the converted problem have the same solution. Numerical results are presented to demonstrate that the proposed approach is efficient and effective.

  14. Factors Controlling the Properties of Multi-Phase Arctic Stratocumulus Clouds

    Science.gov (United States)

    Fridlind, Ann; Ackerman, Andrew; Menon, Surabi

    2005-01-01

    The 2004 Multi-Phase Arctic Cloud Experiment (M-PACE) IOP at the ARM NSA site focused on measuring the properties of autumn transition-season arctic stratus and the environmental conditions controlling them, including concentrations of heterogeneous ice nuclei. Our work aims to use a large-eddy simulation (LES) code with embedded size-resolved aerosol and cloud microphysics to identify factors controlling multi-phase arctic stratus. Our preliminary simulations of autumn transition-season clouds observed during the 1994 Beaufort and Arctic Seas Experiment (BASE) indicated that low concentrations of ice nuclei, which were not measured, may have significantly lowered liquid water content and thereby stabilized cloud evolution. However, cloud drop concentrations appeared to be virtually immune to changes in liquid water content, indicating an active Bergeron process with little effect of collection on drop number concentration. We will compare these results with preliminary simulations from October 8-13 during MPACE. The sensitivity of cloud properties to uncertainty in other factors, such as large-scale forcings and aerosol profiles, will also be investigated. Based on the LES simulations with M-PACE data, preliminary results from the NASA GlSS single-column model (SCM) will be used to examine the sensitivity of predicted cloud properties to changing cloud drop number concentrations for multi-phase arctic clouds. Present parametrizations assumed fixed cloud droplet number concentrations and these will be modified using M-PACE data.

  15. Numerical study of natural convection characteristics of nanofluids in an enclosure using multiphase model

    Science.gov (United States)

    Chen, Yan-Jun; Wang, Ping-Yang; Liu, Zhen-Hua

    2016-11-01

    The natural convective heat transfer and flow characteristics of nanofluids in an enclosure are numerically simulated using the multiphase-flow model and single phase model respectively. The simulated results are compared with the experimental results from the published papers to investigate the applicability of these models for nanofluids from a macro standpoint. The effects of Rayleigh number, Grashof number and volume concentration of nanoparticles on the heat transfer and flow characteristics are investigated and discussed. Comparisons of the horizontal and vertical central dimensionless velocity profiles between nanofluid and water for various Grashof numbers are studied. In addition, both streamline contours and isotherms lines for different volume concentrations of nanofluids are analyzed as well. The study results show that a great deviation exists between the simulated result of the single phase model and the experimental data on the relation of Nusselt number and Rayleigh number, which indicates that the single phase model cannot reflect the heat transfer characteristic of nanofluid. While the simulated results using the multiphase-flow model show a good agreement with the experimental data of nanofluid, which means that the multiphase-flow model is more suitable for the numerical study of nanofluid. For the natural convection, the present study holds the point that using Grashof numbers as the benchmark would be more appropriate to describe the heat transfer characteristics of nanofluid. Moreover, the simulated results demonstrate that adding nanoparticles into the base fluid can enhance both the motion of fluid and convection in the enclosure significantly.

  16. Designing of Multiphase Fly Ash/MWCNT/PU Composite Sheet Against Electromagnetic Environmental Pollution

    Science.gov (United States)

    Gujral, Parth; Varshney, Swati; Dhawan, S. K.

    2016-06-01

    Fly ash and multiwalled carbon nanotubes (MWCNT) reinforced multiphase polyurethane (PU) composite sheets have been fabricated by using a solution casting technique. Utilization of fly ash was the prime objective in order to reduce environmental pollution and to enhance the shielding properties of PU polymer. Our study proves that fly ash particles with MWCNTs in a PU matrix leads to novel hybrid high performance electromagnetic shielding interference material. Scanning electron microscopy confirms the existence of fly ash particles along with MWCNTs in a PU matrix. This multiphase composite shows total shielding effectiveness of 35.8 dB (>99.99% attenuation) in the Ku-band (12.4-18 GHz) frequency range. This is attributed to high dielectric losses of reinforcement present in the polymers matrix. The Nicolson-Ross-Weir algorithm has been applied to calculate the electromagnetic attributes and dielectric parameters of the PU samples by using scattering parameters ( S 11, S 22, S 12, S 21). The synthesized multiphase composites were further characterized by using x-ray diffraction, Fourier transform infrared spectroscopy, and thermo gravimetric analysis.

  17. High-Fidelity Micromechanics Model Enhanced for Multiphase Particulate Materials

    Science.gov (United States)

    Pindera, Marek-Jerzy; Arnold, Steven M.

    2003-01-01

    This 3-year effort involves the development of a comprehensive micromechanics model and a related computer code, capable of accurately estimating both the average response and the local stress and strain fields in the individual phases, assuming both elastic and inelastic behavior. During the first year (fiscal year 2001) of the investigation, a version of the model called the High-Fidelity Generalized Method of Cells (HFGMC) was successfully completed for the thermo-inelastic response of continuously reinforced multiphased materials with arbitrary periodic microstructures (refs. 1 and 2). The model s excellent predictive capability for both the macroscopic response and the microlevel stress and strain fields was demonstrated through comparison with exact analytical and finite element solutions. This year, HFGMC was further extended in two technologically significant ways. The first enhancement entailed the incorporation of fiber/matrix debonding capability into the two-dimensional version of HFGMC for modeling the response of unidirectionally reinforced composites such as titanium matrix composites, which exhibit poor fiber/matrix bond. Comparison with experimental data validated the model s predictive capability. The second enhancement entailed further generalization of HFGMC to three dimensions to enable modeling the response of particulate-reinforced (discontinuous) composites in the elastic material behavior domain. Next year, the three-dimensional version will be generalized to encompass inelastic effects due to plasticity, viscoplasticity, and damage, as well as coupled electromagnetothermomechanical (including piezoelectric) effects.

  18. Small renal Oncocytomas: Differentiation with multiphase CT

    Energy Technology Data Exchange (ETDEWEB)

    Gakis, Georgios, E-mail: georgios.gakis@web.de [Department of Urology, University Hospital Tuebingen, Eberhard-Karls University, Hoppe-Seyler Strasse 3, Tuebingen (Germany); Kramer, Ulrich [Department of Radiology, University Hospital Tuebingen, Eberhard-Karls University, Tuebingen (Germany); Schilling, David; Kruck, Stephan; Stenzl, Arnulf [Department of Urology, University Hospital Tuebingen, Eberhard-Karls University, Hoppe-Seyler Strasse 3, Tuebingen (Germany); Schlemmer, Hans-Peter [Department of Radiology, University Hospital Tuebingen, Eberhard-Karls University, Tuebingen (Germany)

    2011-11-15

    Objectives: To evaluate characteristic imaging findings of tumor attenuation in multiphase computed tomography (CT) between renal oncocytomas and clear-cell renal cell carcinoma (ccRCC) of small tumor size ({<=}5 cm). Methods: We retrospectively identified 20 patients with complete four-phase CT with either histologically confirmed small renal oncocytoma (N = 10) or ccRCC (N = 10) who underwent subsequent total or partial nephrectomy. Exclusion criteria for RCC were non-clear-cell components in histology and a tumor diameter >5 cm. The relative attenuation of solid renal lesions and normal renal cortex was determined in the unenhanced, corticomedullary, nephrographic and excretory phase. Statistical comparison was carried out by Wilcoxon Rank Sum Test. Results: Mean tumor size of renal oncocytomas was 2.8 {+-} 0.4 cm (1.2-5) and of ccRCC 2.5 {+-} 0.2 cm (1.7-4.4; p = 0.57). All lesions were homogenous without extended areas of necroses. In the nephrographic phase, the difference of attenuation between renal cortex and tumor lesion was highest in both entities (oncocytoma, 48.1 {+-} 5.2 HU; ccRCC, 67.5 {+-} 12.1) but not between entities (p = 0.30). In the corticomedullary phase, renal oncocytomas showed greater isodensity to the normal renal cortex (13.9 {+-} 4.3 HU) compared to clear-cell RCC (51.5 {+-} 5.0 HU; p = 0.003). No further significant differences were found for the unenhanced and excretory phase. Conclusions: In this study, the maximum tumor-to-kidney contrast coincided with the nephrographic phase which was thus the most reliable for the detection of a renal lesion <5 cm. For lesion characterization, the corticomedullary phase was most useful for differentiating both entities. This finding is particularly important for the preoperative planning of a partial nephrectomy.

  19. MSTS - Multiphase Subsurface Transport Simulator theory manual

    Energy Technology Data Exchange (ETDEWEB)

    White, M.D.; Nichols, W.E.

    1993-05-01

    The US Department of Energy, through the Yucca Mountain Site Characterization Project Office, has designated the Yucca Mountain site in Nevada for detailed study as the candidate US geologic repository for spent nuclear fuel and high-level radioactive waste. Site characterization will determine the suitability of the Yucca Mountain site for the potential waste repository. If the site is determined suitable, subsequent studies and characterization will be conducted to obtain authorization from the Nuclear Regulatory Commission to construct the potential waste repository. A principal component of the characterization and licensing processes involves numerically predicting the thermal and hydrologic response of the subsurface environment of the Yucca Mountain site to the potential repository over a 10,000-year period. The thermal and hydrologic response of the subsurface environment to the repository is anticipated to include complex processes of countercurrent vapor and liquid migration, multiple-phase heat transfer, multiple-phase transport, and geochemical reactions. Numerical simulators based on mathematical descriptions of these subsurface phenomena are required to make numerical predictions of the thermal and hydrologic response of the Yucca Mountain subsurface environment The engineering simulator called the Multiphase Subsurface Transport Simulator (MSTS) was developed at the request of the Yucca Mountain Site Characterization Project Office to produce numerical predictions of subsurface flow and transport phenomena at the potential Yucca Mountain site. This document delineates the design architecture and describes the specific computational algorithms that compose MSTS. Details for using MSTS and sample problems are given in the {open_quotes}User`s Guide and Reference{close_quotes} companion document.

  20. On the predictive capabilities of multiphase Darcy flow models

    KAUST Repository

    Icardi, Matteo

    2016-01-09

    Darcy s law is a widely used model and the limit of its validity is fairly well known. When the flow is sufficiently slow and the porosity relatively homogeneous and low, Darcy s law is the homogenized equation arising from the Stokes and Navier- Stokes equations and depends on a single effective parameter (the absolute permeability). However when the model is extended to multiphase flows, the assumptions are much more restrictive and less realistic. Therefore it is often used in conjunction with empirical models (such as relative permeability and capillary pressure curves), derived usually from phenomenological speculations and experimental data fitting. In this work, we present the results of a Bayesian calibration of a two-phase flow model, using high-fidelity DNS numerical simulation (at the pore-scale) in a realistic porous medium. These reference results have been obtained from a Navier-Stokes solver coupled with an explicit interphase-tracking scheme. The Bayesian inversion is performed on a simplified 1D model in Matlab by using adaptive spectral method. Several data sets are generated and considered to assess the validity of this 1D model.

  1. A double inclusion model for multiphase piezoelectric composites

    Science.gov (United States)

    Lin, Yirong; Sodano, Henry A.

    2010-03-01

    A novel active structural fiber (ASF; Lin and Sodano 2008 Compos. Sci. Technol. 68 1911-8) was developed that can be embedded in a composite material in order to perform sensing and actuation, in addition to providing load bearing functionality. In order to fully understand the electroelastic properties of the material, this paper will introduce a three-dimensional micromechanics model for estimating the effective electroelastic properties of the multifunctional composites with different design parameters. The three-dimensional model is formulated by extending the double inclusion model to multiphase composites with piezoelectric constituents. The double inclusion model has been chosen for the ASF studied here because it is designed to model composites reinforced by inclusions with multilayer coatings. The accuracy of our extended double inclusion model will be evaluated through a three-dimensional finite element analysis of a representative volume element of the ASF composite. The results will demonstrate that the micromechanics model developed here can very accurately predict the electroelastic properties of the multifunctional composites.

  2. Advanced Multi-Phase Flow CFD Model Development for Solid Rocket Motor Flowfield Analysis

    Science.gov (United States)

    Liaw, Paul; Chen, Y. S.; Shang, H. M.; Doran, Denise

    1993-01-01

    It is known that the simulations of solid rocket motor internal flow field with AL-based propellants require complex multi-phase turbulent flow model. The objective of this study is to develop an advanced particulate multi-phase flow model which includes the effects of particle dynamics, chemical reaction and hot gas flow turbulence. The inclusion of particle agglomeration, particle/gas reaction and mass transfer, particle collision, coalescence and breakup mechanisms in modeling the particle dynamics will allow the proposed model to realistically simulate the flowfield inside a solid rocket motor. The Finite Difference Navier-Stokes numerical code FDNS is used to simulate the steady-state multi-phase particulate flow field for a 3-zone 2-D axisymmetric ASRM model and a 6-zone 3-D ASRM model at launch conditions. The 2-D model includes aft-end cavity and submerged nozzle. The 3-D model represents the whole ASRM geometry, including additional grain port area in the gas cavity and two inhibitors. FDNS is a pressure based finite difference Navier-Stokes flow solver with time-accurate adaptive second-order upwind schemes, standard and extended k-epsilon models with compressibility corrections, multi zone body-fitted formulations, and turbulence particle interaction model. Eulerian/Lagrangian multi-phase solution method is applied for multi-zone mesh. To simulate the chemical reaction, penalty function corrected efficient finite-rate chemistry integration method is used in FDNS. For the AL particle combustion rate, the Hermsen correlation is employed. To simulate the turbulent dispersion of particles, the Gaussian probability distribution with standard deviation equal to (2k/3)(exp 1/2) is used for the random turbulent velocity components. The computational results reveal that the flow field near the juncture of aft-end cavity and the submerged nozzle is very complex. The effects of the turbulent particles affect the flow field significantly and provide better

  3. Viscous and Gravitational Fingering in Multiphase Compositional and Compressible Flow

    CERN Document Server

    Moortgat, Joachim

    2016-01-01

    Viscous and gravitational fingering refer to flow instabilities in porous media that are triggered by adverse mobility or density ratios, respectively. These instabilities have been studied extensively in the past for 1) single-phase flow (e.g., contaminant transport in groundwater, first-contact-miscible displacement of oil by gas in hydrocarbon production), and 2) multi-phase immiscible and incompressible flow (e.g., water-alternating-gas (WAG) injection in oil reservoirs). Fingering in multiphase compositional and compressible flow has received much less attention, perhaps due to its high computational complexity. However, many important subsurface processes involve multiple phases that exchange species. Examples are carbon sequestration in saline aquifers and enhanced oil recovery (EOR) by gas or WAG injection below the minimum miscibility pressure. In multiphase flow, relative permeabilities affect the mobility contrast for a given viscosity ratio. Phase behavior can also change local fluid properties, w...

  4. Electrification of particulates in industrial and natural multiphase flows

    CERN Document Server

    Gu, Zhaolin

    2017-01-01

    This book introduces comprehensive fundamentals, numerical simulations and experimental methods of electrification of particulates entrained multiphase flows. The electrifications of two particulate forms, liquid droplets and solid particles, are firstly described together. Liquid droplets can be charged under preset or associated electric fields, while solid particles can be charged through contact. Different charging ways in gas (liquid)-liquid or gas-solid multiphase flows are summarized, including ones that are beneficial to industrial processes, such as electrostatic precipitation, electrostatic spraying, and electrostatic separation, etc., ones harmful for shipping and powder industry, and ones occurring in natural phenomenon, such as wind-blown sand and thunderstorm. This book offers theoretical references to the control and utilization of the charging or charged particulates in multiphase flows as well.

  5. A Cell-Centered Multiphase ALE Scheme With Structural Coupling

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, Timothy Alan [Univ. of California, Davis, CA (United States)

    2012-04-16

    A novel computational scheme has been developed for simulating compressible multiphase flows interacting with solid structures. The multiphase fluid is computed using a Godunov-type finite-volume method. This has been extended to allow computations on moving meshes using a direct arbitrary-Eulerian- Lagrangian (ALE) scheme. The method has been implemented within a Lagrangian hydrocode, which allows modeling the interaction with Lagrangian structural regions. Although the above scheme is general enough for use on many applications, the ultimate goal of the research is the simulation of heterogeneous energetic material, such as explosives or propellants. The method is powerful enough for application to all stages of the problem, including the initial burning of the material, the propagation of blast waves, and interaction with surrounding structures. The method has been tested on a number of canonical multiphase tests as well as fluid-structure interaction problems.

  6. Multi-phase SPH modelling of violent hydrodynamics on GPUs

    Science.gov (United States)

    Mokos, Athanasios; Rogers, Benedict D.; Stansby, Peter K.; Domínguez, José M.

    2015-11-01

    This paper presents the acceleration of multi-phase smoothed particle hydrodynamics (SPH) using a graphics processing unit (GPU) enabling large numbers of particles (10-20 million) to be simulated on just a single GPU card. With novel hardware architectures such as a GPU, the optimum approach to implement a multi-phase scheme presents some new challenges. Many more particles must be included in the calculation and there are very different speeds of sound in each phase with the largest speed of sound determining the time step. This requires efficient computation. To take full advantage of the hardware acceleration provided by a single GPU for a multi-phase simulation, four different algorithms are investigated: conditional statements, binary operators, separate particle lists and an intermediate global function. Runtime results show that the optimum approach needs to employ separate cell and neighbour lists for each phase. The profiler shows that this approach leads to a reduction in both memory transactions and arithmetic operations giving significant runtime gains. The four different algorithms are compared to the efficiency of the optimised single-phase GPU code, DualSPHysics, for 2-D and 3-D simulations which indicate that the multi-phase functionality has a significant computational overhead. A comparison with an optimised CPU code shows a speed up of an order of magnitude over an OpenMP simulation with 8 threads and two orders of magnitude over a single thread simulation. A demonstration of the multi-phase SPH GPU code is provided by a 3-D dam break case impacting an obstacle. This shows better agreement with experimental results than an equivalent single-phase code. The multi-phase GPU code enables a convergence study to be undertaken on a single GPU with a large number of particles that otherwise would have required large high performance computing resources.

  7. Numerical modeling of experimental observations on gas formation and multi-phase flow of carbon dioxide in subsurface formations

    Science.gov (United States)

    Pawar, R.; Dash, Z.; Sakaki, T.; Plampin, M. R.; Lassen, R. N.; Illangasekare, T. H.; Zyvoloski, G.

    2011-12-01

    One of the concerns related to geologic CO2 sequestration is potential leakage of CO2 and its subsequent migration to shallow groundwater resources leading to geochemical impacts. Developing approaches to monitor CO2 migration in shallow aquifer and mitigate leakage impacts will require improving our understanding of gas phase formation and multi-phase flow subsequent to CO2 leakage in shallow aquifers. We are utilizing an integrated approach combining laboratory experiments and numerical simulations to characterize the multi-phase flow of CO2 in shallow aquifers. The laboratory experiments involve a series of highly controlled experiments in which CO2 dissolved water is injected in homogeneous and heterogeneous soil columns and tanks. The experimental results are used to study the effects of soil properties, temperature, pressure gradients and heterogeneities on gas formation and migration. We utilize the Finite Element Heat and Mass (FEHM) simulator (Zyvoloski et al, 2010) to numerically model the experimental results. The numerical models capture the physics of CO2 exsolution, multi-phase fluid flow as well as sand heterogeneity. Experimental observations of pressure, temperature and gas saturations are used to develop and constrain conceptual models for CO2 gas-phase formation and multi-phase CO2 flow in porous media. This talk will provide details of development of conceptual models based on experimental observation, development of numerical models for laboratory experiments and modelling results.

  8. 纳米ZrB2复相陶瓷粉体表面有机功能改性及其对复合材料热性能的影响%Effect of Surface Organic Functional Modification of ZrB2 Nanosize Multiphase Ceramics on the Thermal Properties of Its Composites

    Institute of Scientific and Technical Information of China (English)

    何延楠; 于志强

    2015-01-01

    In order to enhance the thermal properties of the epoxy resin, zirconium diboride( ZrB2 ) powders were chosen as reinforcement to add to the epoxy resin matrix to prepare composites by the in-situ polymeriza-tion due to its high melting point, good thermal conductivity and good heat resistance. The nano-alumina ( Al2 O3 ) was introduced in to form ZrB2-Al2 O3 multiphase ceramics through the high energy ball milling and by surface organic modification of nano-Al2 O3 to achieve improved dispersibility of ZrB2 particles in epoxy resin. The multiphase ceramic particles were modified by γ-aminopropyltriethoxysilane, γ-glycidoxypropyltri-methoxysilane andγ-methacryloxypropyltrimethoxysilane, respectively. The modified multiphase particles were characterized by scanning electron microscopy ( SEM ) , Fourier transform infrared spectroscopy ( FTIR ) and X-ray photoelectron spectroscopy( XPS) . The microstructure and thermal properties of composites filled with modified particles were analyzed using transmission electron microscopy ( TEM ) , dynamic thermomechanical analysis( DMA ) and thermo gravimetric analysis ( TGA ) . The results show that the quality of multiphase particles is good after modification. The three organic coupling agent molecules are all combined to the surfaces of multiphase particles by the covalent bonds. The multiphase particles modified with organic coupling agents disperse well in epoxy resin matrix and the effect of γ-glycidoxypropyltrimethoxysilane is the best. The Composites filled with modified particles present higher thermal properties compared to unmodified composites.%为了提高环氧树脂的热性能,将熔点高、导热耐热性好的ZrB2粉体作为增强体加入环氧树脂基体中,通过原位聚合制备了复合材料。为了改善ZrB2粉体在环氧树脂中的分散性,通过高能球磨法将纳米Al2 O3引入ZrB2中,形成ZrB2-Al2 O3复相陶瓷粉体,再用3-三乙氧基甲硅烷基-1-丙胺、3-缩水甘油醚氧

  9. Lattice Boltzmann Simulation of Multiphase Transport in Nanostructured PEM Fuel Cells

    Science.gov (United States)

    Stiles, Christopher D.

    As the fossil fuel crisis becomes more critical, it is imperative to develop renewable sources of power generation. Polymer electrolyte membrane (PEM) fuel cells are considered a viable option. However, the cost of the platinum catalyst has hindered their commercialization. PEM fuel cells with platinum loading of >0.4 mg cm2 are common. Efforts towards further reducing this loading are currently underway utilizing nanostructured electrodes. A consequence of increased platinum utilization per unit area and thinner nanostructured electrodes is flooding, which is detrimental to fuel cell performance. Flooding causes a two-fold impact on cell performance: a drop in cell voltage and a rise in parasitic pumping power to overcome the increased pressure drop, which together result in a significant reduction in system efficiency. Proper water management is therefore crucial for optimum performance of the fuel cell and also for enhancing membrane durability. The goal of this thesis is to simulate the multiphase fluid transport in the nanostructured PEMFC of H2O in air with realistic density ratios. In order to pursue this goal, the ability of the pseudopotential based multiphase lattice Boltzmann method to realistically model the coexistence of the gas and liquid phases of H2O at low temperatures is explored. This method is expanded to include a gas mixture of O2 and N 2 into the multiphase H2O systems. Beginning with the examination of the phase transition region described by the current implementation of the multiphase pseudopotential lattice Boltzmann model. Following this, a modified form of the pressure term with the use of a scalar multiplier kappa for the Peng-Robinson equation of state is thoroughly investigated. This method proves to be very effective at enabling numerically stable simulations at low temperatures with large density ratios. It is found that for decreasing values of kappa, this model leads to an increase in multiphase interface thickness and a

  10. Experimental Study and Simulation Principles of An Oil-Gas Multiphase Transportation System

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    - Presented is an experimental study on the performance of an oil-gas multiphase transportation system, especially on the multiphase flow patterns, multiphase pumping and multiphase metering of the system. A dynamic simulation analysis is conducted to deduce simulation parameters of the system and similarity criteria under simplified conditions are obtained. The reliability and feasibility of two-phase flow experiment with oil and natural gas simulated by water and air are discussed by using the similarity criteria.

  11. National laboratories` capabilities summaries for the DOE Virtual Center for Multiphase Dynamics (VCMD)

    Energy Technology Data Exchange (ETDEWEB)

    Joyce, E.L.

    1997-03-01

    The Virtual Center For Multiphase Dynamics (VCMD) integrates and develops the resources of industry, government, academia, and professional societies to enable reliable analysis in multiphase computational fluid dynamics. The primary means of the VCMD focus will be by the creation, support, and validation of a computerized simulation capability for multiphase flow and multiphase flow applications. This paper briefly describes the capabilities of the National Laboratories in this effort.

  12. Multiphasic acute disseminated encephalomyelitis associated with atypical rubella virus infection.

    Science.gov (United States)

    Shinoda, Koji; Asahara, Hideaki; Uehara, Taira; Miyoshi, Katsue; Suzuki, Satoshi O; Iwaki, Toru; Kira, Jun-ichi

    2015-02-01

    We report the first case of an occurrence of multiphasic acute disseminated encephalomyelitis (ADEM) associated with atypical rubella virus infection with no rash and long-term increased titers of serum anti-rubella IgM in a 17-year-old male who had no history of rubella vaccination. He suffered from at least six clinical exacerbations with disseminated hyperintense lesions on FLAIR MR images during the course of 18 months. Repeated methylprednisolone pulse therapy and intravenous immunoglobulin therapy resolved the exacerbations. In patients with multiphasic ADEM of unknown etiology, clinicians should also consider the possibility of preceding infection with rubella virus.

  13. Multiphase Return Trajectory Optimization Based on Hybrid Algorithm

    Directory of Open Access Journals (Sweden)

    Yi Yang

    2016-01-01

    Full Text Available A hybrid trajectory optimization method consisting of Gauss pseudospectral method (GPM and natural computation algorithm has been developed and utilized to solve multiphase return trajectory optimization problem, where a phase is defined as a subinterval in which the right-hand side of the differential equation is continuous. GPM converts the optimal control problem to a nonlinear programming problem (NLP, which helps to improve calculation accuracy and speed of natural computation algorithm. Through numerical simulations, it is found that the multiphase optimal control problem could be solved perfectly.

  14. Direct numerical simulations of gas-liquid multiphase flows

    CERN Document Server

    Tryggvason, Grétar; Zaleski, Stéphane

    2011-01-01

    Accurately predicting the behaviour of multiphase flows is a problem of immense industrial and scientific interest. Modern computers can now study the dynamics in great detail and these simulations yield unprecedented insight. This book provides a comprehensive introduction to direct numerical simulations of multiphase flows for researchers and graduate students. After a brief overview of the context and history the authors review the governing equations. A particular emphasis is placed on the 'one-fluid' formulation where a single set of equations is used to describe the entire flow field and

  15. Development of Next Generation Multiphase Pipe Flow Prediction Tools

    Energy Technology Data Exchange (ETDEWEB)

    Cem Sarica; Holden Zhang

    2006-05-31

    The developments of oil and gas fields in deep waters (5000 ft and more) will become more common in the future. It is inevitable that production systems will operate under multiphase flow conditions (simultaneous flow of gas, oil and water possibly along with sand, hydrates, and waxes). Multiphase flow prediction tools are essential for every phase of hydrocarbon recovery from design to operation. Recovery from deep-waters poses special challenges and requires accurate multiphase flow predictive tools for several applications, including the design and diagnostics of the production systems, separation of phases in horizontal wells, and multiphase separation (topside, seabed or bottom-hole). It is crucial for any multiphase separation technique, either at topside, seabed or bottom-hole, to know inlet conditions such as flow rates, flow patterns, and volume fractions of gas, oil and water coming into the separation devices. Therefore, the development of a new generation of multiphase flow predictive tools is needed. The overall objective of the proposed study is to develop a unified model for gas-oil-water three-phase flow in wells, flow lines, and pipelines to predict flow characteristics such as flow patterns, phase distributions, and pressure gradient encountered during petroleum production at different flow conditions (pipe diameter and inclination, fluid properties and flow rates). In the current multiphase modeling approach, flow pattern and flow behavior (pressure gradient and phase fractions) prediction modeling are separated. Thus, different models based on different physics are employed, causing inaccuracies and discontinuities. Moreover, oil and water are treated as a pseudo single phase, ignoring the distinct characteristics of both oil and water, and often resulting in inaccurate design that leads to operational problems. In this study, a new model is being developed through a theoretical and experimental study employing a revolutionary approach. The

  16. Axisymmetric multiphase Lattice Boltzmann method for generic equations of state

    CERN Document Server

    Reijers, Sten A; Toschi, Federico

    2015-01-01

    We present an axisymmetric lattice Boltzmann model based on the Kupershtokh et al. multiphase model that is capable of solving liquid-gas density ratios up to $10^3$. Appropriate source terms are added to the lattice Boltzmann evolution equation to fully recover the axisymmetric multiphase conservation equations. We validate the model by showing that a stationary droplet obeys the Young-Laplace law, comparing the second oscillation mode of a droplet with respect to an analytical solution and showing correct mass conservation of a propagating density wave.

  17. Profiles for voltage-activated currents are multiphasic, not curvilinear

    CERN Document Server

    Nissen, Per

    2016-01-01

    Data for voltage-activation of a potassium channel (Matulef et al. Proc Natl Acad Sci USA 110: 17886-17891. 2013) were, as conventionally done, fitted by the authors by a Boltzmann function, i.e. by a curvilinear profile. Reanalysis of the data reveals however that this interpretation must be rejected in favor of a multiphasic profile, a series of straight lines separated by discontinuous transitions, quite often in the form of noncontiguities (jumps). In contrast to the generally very poor fits to the Boltzmann profiles, the fits to multiphasic profiles are very good. (For the four replicates, the average deviations from the Boltzmann curves were 10- to 100-fold larger than the deviations from the multiphasic profiles.) The difference in the median values was statistically highly significant, P<0.001 in most cases. For the mean values the deviations from the Boltzmann curve were 20-fold larger than the deviations from the multiphasic profile, and the difference in the median values was also highly signifi...

  18. A Transformerless Medium Voltage Multiphase Motor Drive System

    Directory of Open Access Journals (Sweden)

    Dan Wang

    2016-04-01

    Full Text Available A multiphase motor has several major advantages, such as high reliability, fault tolerance, and high power density. It is a critical issue to develop a reliable and efficient multiphase motor drive system. In this paper, a transformerless voltage source converter-based drive system for a medium-voltage (MV multiphase motor is proposed. This drive converter employs cascaded H-bridge rectifiers loaded by H-bridge inverters as the interface between the grid and multiphase motor. The cascaded H-bridge rectifier technique makes the drive system able to be directly connected to the MV grid without the phase-shifting transformer because it can offset the voltage level gap between the MV grid and the semiconductor devices, provide near-sinusoidal AC terminal voltages without filters, and draw sinusoidal line current from the grid. Based on a digital signal processor (DSP, a complete improved Phase Disposition Pulse Width Modulation (PD-PWM method is developed to ensure the individual DC-link capacitor voltage balancing for enhancing the controllability and limiting the voltage and power stress on the H-bridge cells. A downscaled prototype is designed and developed based on a nine-phase motor. The experimental results verify the excellent performances of the proposed drive system and control strategy in steady-state and variant-frequency startup operations.

  19. Multiphase modeling of tumor growth with matrix remodeling and fibrosis

    CERN Document Server

    Tosin, Andrea

    2009-01-01

    We present a multiphase mathematical model for tumor growth which incorporates the remodeling of the extracellular matrix and describes the formation of fibrotic tissue by tumor cells. We also detail a full qualitative analysis of the spatially homogeneous problem, and study the equilibria of the system in order to characterize the conditions under which fibrosis may occur.

  20. Analysis of hygral induced crack growth in multiphase materials

    NARCIS (Netherlands)

    Sadouki, H.; Van Mier, J.G.M.

    1996-01-01

    In this paper a numerical model for simulating crack growth processes caused by moisture movement in a porous multiphase material like concrete is proposed. In the model, the material is schematized as a regular triangular network of beam elements. The meso-material structure of the material is proj

  1. Hydrodynamical Coupling of Mass and Momentum in Multiphase Galactic Winds

    Science.gov (United States)

    Schneider, Evan E.; Robertson, Brant E.

    2017-01-01

    Using a set of high-resolution hydrodynamical simulations run with the Cholla code, we investigate how mass and momentum couple to the multiphase components of galactic winds. The simulations model the interaction between a hot wind driven by supernova explosions and a cooler, denser cloud of interstellar or circumgalactic media. By resolving scales of {{Δ }}x 100 pc distances, our calculations capture how the cloud disruption leads to a distribution of densities and temperatures in the resulting multiphase outflow and quantify the mass and momentum associated with each phase. We find that the multiphase wind contains comparable mass and momenta in phases over a wide range of densities and temperatures extending from the hot wind (n≈ {10}-2.5 {{cm}}-3, T≈ {10}6.5 K) to the coldest components (n≈ {10}2 {{cm}}-3, T≈ {10}2 K). We further find that the momentum distributes roughly in proportion to the mass in each phase, and the mass loading of the hot phase by the destruction of cold, dense material is an efficient process. These results provide new insight into the physical origin of observed multiphase galactic outflows and inform galaxy formation models that include coarser treatments of galactic winds. Our results confirm that cool gas observed in outflows at large distances from the galaxy (≳ 1 kpc) likely does not originate through the entrainment of cold material near the central starburst.

  2. Multiphase flow of immiscible fluids on unstructured moving meshes

    DEFF Research Database (Denmark)

    Misztal, Marek Krzysztof; Erleben, Kenny; Bargteil, Adam

    2012-01-01

    In this paper, we present a method for animating multiphase flow of immiscible fluids using unstructured moving meshes. Our underlying discretization is an unstructured tetrahedral mesh, the deformable simplicial complex (DSC), that moves with the flow in a Lagrangian manner. Mesh optimization op...

  3. A New Multiphase Equation of State for Composition B

    Energy Technology Data Exchange (ETDEWEB)

    Coe, Joshua Damon [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Margevicius, Madeline Alma [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division

    2016-07-25

    We describe the construction of a complete equation of state for the high explosive Composition B in its unreacted (inert) form, as well as chemical equilibrium calculations of its detonation products. The multiphase reactant EOS is of SESAME type, and was calibrated to ambient thermal and mechanical data, the shock initiation experiments of Dattelbaum, et al., and the melt line of trinitrotoluene (TNT).

  4. A single element multiphase compulsator powered railgun systems

    Energy Technology Data Exchange (ETDEWEB)

    Murthy, S.K.; Weldon, W.F. (Univ. of Texas, Austin, TX (United States). Center for Electromechanics)

    1994-01-01

    This paper investigates multiphase railguns (electromagnetic launchers) powered by multiphase compensated pulsed alternators (compulsators). The polyphase system offers several advantages over the single phase system. The multiphase compulsator relaxes the strong dependence between the current pulse width necessary for the railgun and the design parameters of the generator (number of poles, rotor diameter and tip speed) thus allowing the compulsator to be designed for optimum power density and electromechanical energy conversion. The paper examines in particular the two phase system. The authors explore different methods of achieving high acceleration ratios (average to peak) in multiphase railgun systems. Some of the methods analyzed are ramping up the field current of the compulsator to counter the increasing impedance of the gun, using a railgun with varying inductance per unit length (L[prime]), and using an external variable inductor in series with the compulsator. Special attention is devoted to the external series inductor method which uses a rotary flux compressor (rfc). Several concepts to integrate the rfc and the compulsator into a single element device are discussed. Comparison between the state of the art single phase compulsator powered 9 MJ railgun system, currently under fabrication at CEM-UT and a two phase compulsator driven four rail railgun system is also presented.

  5. Multiphase flow in a confined geometry with Dissipative Particle Dynamics

    NARCIS (Netherlands)

    Visser, D.C.

    2015-01-01

    The research presented in this thesis is focused on the modelling of multiphase flow in a confined geometry with Dissipative Particle Dynamics (DPD). DPD is a particle-based mesoscopic simulation technique that obeys the Navier-Stokes equations and is particularly useful to model complex fluids and

  6. Multiphase fluid structure interaction in bends and T-joints

    NARCIS (Netherlands)

    Cargnelutti, M.F.; Belfroid, S.P.C.; Schiferli, W.; Osch, M.M.E. van

    2010-01-01

    Air-water experiments were carried out in a horizontal 1" pipe system to measure the magnitude of the forces induced by the multiphase flow. Forces and accelerations were measured on a number of bends and T-joint configurations for a wide range of operating conditions. Five different configurations

  7. Multiphase fluid structure interaction in bends and T-joints

    NARCIS (Netherlands)

    Cargnelutti, M.F.; Belfroid, S.P.C.; Schiferli, W.; Osch, M.M.E. van

    2010-01-01

    Air-water experiments were carried out in a horizontal 1" pipe system to measure the magnitude of the forces induced by the multiphase flow. Forces and accelerations were measured on a number of bends and T-joint configurations for a wide range of operating conditions. Five different configurations

  8. Toward a General Theory for Multiphase Turbulence Part I: Development and Gauging of the Model Equations

    Energy Technology Data Exchange (ETDEWEB)

    B. A. Kashiwa; W. B. VanderHeyden

    2000-12-01

    A formalism for developing multiphase turbulence models is introduced by analogy to the phenomenological method used for single-phase turbulence. A sample model developed using the formalism is given in detail. The procedure begins with ensemble averaging of the exact conservation equations, with closure accomplished by using a combination of analytical and experimental results from the literature. The resulting model is applicable to a wide range of common multiphase flows including gas-solid, liquid-solid and gas-liquid (bubbly) flows. The model is positioned for ready extension to three-phase turbulence, or for use in two-phase turbulence in which one phase is accounted for in multiple size classes, representing polydispersivity. The formalism is expected to suggest directions toward a more fundamentally based theory, similar to the way that early work in single-phase turbulence has led to the spectral theory. The approach is unique in that a portion of the total energy decay rate is ascribed to each phase, as is dictated by the exact averaged equations, and results in a transport equation for energy decay rate associated with each phase. What follows is a straightforward definition of a turbulent viscosity for each phase, and accounts for the effect of exchange of fluctuational energy among phases on the turbulent shear viscosity. The model also accounts for the effect of slip momentum transfer among the phases on the production of turbulence kinetic energy and on the tensor character of the Reynolds stress. Collisional effects, when appropriate, are included by superposition. The model reduces to a standard form in limit of a single, pure material, and is expected to do a credible job of describing multiphase turbulent flows in a wide variety of regimes using a single set of coefficients.

  9. Impact of sorption phenomena on multiphase conveying processes

    Science.gov (United States)

    Hatesuer, Florian; Groth, Tillmann; Reichwage, Mark; Mewes, Dieter; Luke, Andrea

    2011-08-01

    Twin-screw multiphase pumps are employed increasingly to convey multiphase mixtures of crude oil, accompanying fluids, associated gas and solid particles. They are positive displacement pumps and suitable for handling products containing liquid accompanied by large amounts of gas. Experimental investigations on the conveying characteristic, namely measuring the delivered volume flow as a function of the pressure difference, provide results for selected mixtures. By means of the on hand work, the influence of sorption phenomena occurring due to pressure variations alongside the conveying process on the conveying characteristics of twin-screw pumps delivering mixtures of oil and gases is measured. The employed gases are air and carbon dioxide, which differ strongly in solubility in oil. All experiments are conducted in a closed loop test facility, where oil and gas volume flows are mixed before the inlet and separated after the outlet of the multiphase pump. In order to simulate the influence of the suction side pressure drop in the reservoir on the conveying characteristic, packed beds are employed as oil-filed model. Sorption processes inside of the oil-field model and within the multiphase pump affect the conveying behaviour significantly. The two-phase flow in the inlet and outlet pipe is visualised by means of a capacitance tomography system. Results show that the oil fraction of the total delivered volume flow is decreased due to desorption at the pump inlet. The gas fraction at the pump outlet is further decreased due to absorption. Experimental results are compared to calculated solubilities of the on-hand gases in oil and to the theoretically derived gas volume flow fraction expected at the multiphase pump.

  10. Rheological flow laws for multiphase magmas: An empirical approach

    Science.gov (United States)

    Pistone, Mattia; Cordonnier, Benoît; Ulmer, Peter; Caricchi, Luca

    2016-07-01

    The physical properties of magmas play a fundamental role in controlling the eruptive dynamics of volcanoes. Magmas are multiphase mixtures of crystals and gas bubbles suspended in a silicate melt and, to date, no flow laws describe their rheological behaviour. In this study we present a set of equations quantifying the flow of high-viscosity (> 105 Pa·s) silica-rich multiphase magmas, containing both crystals (24-65 vol.%) and gas bubbles (9-12 vol.%). Flow laws were obtained using deformation experiments performed at high temperature (673-1023 K) and pressure (200-250 MPa) over a range of strain-rates (5 · 10- 6 s- 1 to 4 · 10- 3 s- 1), conditions that are relevant for volcanic conduit processes of silica-rich systems ranging from crystal-rich lava domes to crystal-poor obsidian flows. We propose flow laws in which stress exponent, activation energy, and pre-exponential factor depend on a parameter that includes the volume fraction of weak phases (i.e. melt and gas bubbles) present in the magma. The bubble volume fraction has opposing effects depending on the relative crystal volume fraction: at low crystallinity bubble deformation generates gas connectivity and permeability pathways, whereas at high crystallinity bubbles do not connect and act as "lubricant" objects during strain localisation within shear bands. We show that such difference in the evolution of texture is mainly controlled by the strain-rate (i.e. the local stress within shear bands) at which the experiments are performed, and affect the empirical parameters used for the flow laws. At low crystallinity ( 44 vol.%) the viscosity decreases with increasing strain-rate. Because these behaviours are also associated with modifications of sample textures during the experiment and, thus, are not purely the result of different deformation rates, we refer to "apparent shear-thickening" and "apparent shear-thinning" for the behaviours observed at low and high crystallinity, respectively. At low

  11. Contrast optimization in multiphase arterial spin labeling; Otimizacao do contraste em ASL multi-fase

    Energy Technology Data Exchange (ETDEWEB)

    Paiva, Fernando F.; Paschoal, Andre M., E-mail: paiva@ifsc.usp.br [Universidade de Sao Paulo (CIERMag/USP), Sao Carlos, SP (Brazil). Instituto de Fisica; Foerster, Bernd U. [Philips Medical Systems LatAm, Sao Paulo, SP (Brazil); Tovar-Moll, Fernanda; Moll, Jorge [Instituto D' Or de Pesquisa e Ensino, Rio de Janeiro, RJ (Brazil)

    2013-08-15

    Multiphase ASL is an effective way to overcome the regional variation of the transit time that difficult the estimation of perfusion values. However, with conventional multiple phases ASL techniques, the ASL contrast at later phases is impaired due to repeated application of excitation pulses and longitudinal relaxation making it difficult to evaluate the tissue perfusion in regions where the transit time is longer. In the present study, we show an improvement of the acquisition scheme by exploring a modulation on the flip angle of the MR acquisition to keep the ASL contrast constant over multiple phases. (author)

  12. Modelling of transit-time ultrasonic flow meters under multi-phase flow conditions

    DEFF Research Database (Denmark)

    Simurda, Matej; Duggen, Lars; Lassen, Benny

    2016-01-01

    A pseudospectral model for transit time ultrasonic flowmeters under multiphase flow conditions is presented. The method solves first order stress-velocity equations of elastodynamics, with acoustic media being modelled by setting shear modulus to zero. Additional terms to account for the effect...... of the background flow are included. Spatial derivatives are calculated by a Fourier collocation scheme allowing the use of the Fast Fourier transform. The method is compared against analytical solutions and experimental measurements. Additionally, a study of clamp-on and in-line ultrasonic flowmeters operating...

  13. Influence of different factors on momentum transfer in mechanically agitated multiphase systems

    Directory of Open Access Journals (Sweden)

    Cudak Magdalena

    2016-03-01

    Full Text Available A comparative analysis concerning the influence of different factors on momentum transfer in mechanically agitated systems was carried out on the basis of experimental results for solid-liquid, gas-liquid and gas-solid-liquid systems. The effects of the impeller - baffles system geometry, scale of the agitated vessel, type and number of impellers and their off-bottom clearance, as well as physical properties of the multiphase systems on the critical impeller speeds needed to produce suspension or dispersion, power consumption and gas hold-up were analysed and evaluated.

  14. Automatic liver segmentation method featuring a novel filter for multiphase multidetector-row helical computed tomography.

    Science.gov (United States)

    Hirose, Tomohiro; Nitta, Norihisa; Tsudagawa, Masaru; Takahashi, Masashi; Murata, Kiyoshi

    2011-01-01

    To introduce an automatic liver segmentation method that includes a novel filter for multiphase multidetector-row helical computed tomography. We acquired 3-phase multidetector-row computed tomographic scans that included unenhanced, arterial, and portal phases. The liver was segmented using our novel adaptive linear prediction filter designed to reduce the difference between filter input and output values in the liver region and to increase these values outside the liver region. The segmentation algorithm produced a mean dice similarity coefficient (DSC) value of 91.4%. The application of our adaptive linear prediction filter was effective in automatically extracting liver regions.

  15. [Spectral diagnosis of hydroxyl radical in multiphase pulsed discharge system].

    Science.gov (United States)

    Wang, Hui-juan; Li, Jie; Quan, Xie; Wu, Yan; Li, Guo-feng

    2007-12-01

    A gas-liquid hybrid pulsed discharge system with a multi-needle-to-plate electrode geometry was used in the present study. A multiphase (gas-liquid-solid) pulsed discharge system was then formed by adding glasses beads immobilized with TiO2 photocatalyst into the discharge system. In the present paper, ultraviolet light produced during the pulsed discharge process was used as the lamp-house to induce the photocatalytic activity of the TiO2 photocatalyst. The synergistic effect of pulsed discharge and TiO2 photocatalysis was reviewed by the spectral diagnosis of hydroxyl radical ( *OH) in the pulsed discharge system. The obtained results showed that the emission spectrum of *OH could be observed at 306 nm (A2Sigma+-->X2II), 309 mn (A2Sigma+ (v' = 0) --> X2II (v" = 0)) and 313 nm (A2Sigma+ (v' = 1) --> X2II (v" = 1) transition). The relative emission intensity of *OH at 313 nm in the discharge system was the strongest among the three characteristic spectra. The relative emission intensity of *OH at 313 nm was stronger by adding TiO2 photocatalyst into the pulsed discharge system than that in the sole pulsed discharge system. In the case of experiments that changing the gas bubbling varieties and initial solution pH values, the results revealed that the relative emission intensity of *OH at 313 nm in the synergistic system was stronger when Ar was used as bubbling gas compared with that when air and oxygen were bubbled into the reaction system. Furthermore, the acidic solution system was favorable for producing more *OH, and therefore the corresponding emission intensity of *OH at 313 nm was stronger than that in the neutral and basic solution.

  16. Investigation of hydrate formation and transportability in multiphase flow systems

    Science.gov (United States)

    Grasso, Giovanny A.

    The oil and gas industry is moving towards offshore developments in more challenging environments, where evaluating hydrate plugging risks to avoid operational/safety hazards becomes more difficult (Sloan, 2005). Even though mechanistic models for hydrate plug formation have been developed, components for a full comprehensive model are still missing. Prior to this work, research efforts were focused on flowing hydrate particles with relatively little research on hydrate accumulation, leaving hydrate deposition in multiphase flow an unexplored subject. The focus of this thesis was to better understand hydrate deposition as a form of accumu- lation in pipelines. To incorporate the multiphase flow effect, hydrate formation experiments were carried out at varying water cut (WC) from 15 to 100 vol.%, liquid loading (LL) from 50 to 85 vol.%, mixture velocity (vmix) from 0.75 to 3 m/s, for three fluids systems (100 % WC, water in Conroe crude oil emulsions and King Ranch condensate + water) on the ExxonMobil flowloop (4 in. nominal size and 314 ft. long) at Friendswood, TX. For the 100 % WC flowloop tests, hydrate particle distribution transitions beyond a critical hydrate volume concentration, observed values were between 8.2 to 29.4 vol.%, causing a sudden increase in pressure drop (DP). A revised correlation of the transition as a function of Reynolds number and liquid loading was developed. For Conroe emulsions, DP starts increasing at higher hydrate concentrations than King Ranch condensate, many times at 10 vol.%. Experiments with King Ranch show higher relative DP (10 to 25) than Conroe (2 to 10) performed at the same vmix and LL. Cohesive force measurements between cyclopentane hydrate particles were reduced from a value of 3.32 mN/m to 1.26 mN/m when 6 wt.% Conroe was used and to 0.41 mN/m when 5 wt.% Caratinga crude oil was used; similar values were obtained when extracted asphaltenes were used. King Ranch condensate (11 wt.%) did not significantly change the

  17. Average holdup in multiphase pipelines with low loads of liquids%低含液率多相管路平均持液率

    Institute of Scientific and Technical Information of China (English)

    王武昌; 李玉星; 唐建峰; 喻西崇

    2005-01-01

    The experimental study on average holdup in multiphase pipelines with low loads of liquids was conducted on a large multiphase flow loop. The average holdup increased with increasing liquid load and decreased with increasing gas velocity, and also depended on the undulation of pipeline and flow patterns in the pipeline. The effects of eight dimensionless parameters on average holdup were seriated with grey relational degree analysis so as to find the most important factors affecting the average holdup in multiphase pipelines with low loads of liquids. An average holdup correlation based on low liquid loads was also developed and the correlation related the most important three factors including superficial gas velocity number (Ngw), superficial liquid velocity number (Nlw) and liquid Reynolds number (Rel) to the average holdup. Finally the correlation was tested with the field data and the result was satisfying.

  18. TOUGH2: A general-purpose numerical simulator for multiphase nonisothermal flows

    Energy Technology Data Exchange (ETDEWEB)

    Pruess, K. [Lawrence Berkeley Lab., CA (United States)

    1991-06-01

    Numerical simulators for multiphase fluid and heat flows in permeable media have been under development at Lawrence Berkeley Laboratory for more than 10 yr. Real geofluids contain noncondensible gases and dissolved solids in addition to water, and the desire to model such `compositional` systems led to the development of a flexible multicomponent, multiphase simulation architecture known as MULKOM. The design of MULKOM was based on the recognition that the mass-and energy-balance equations for multiphase fluid and heat flows in multicomponent systems have the same mathematical form, regardless of the number and nature of fluid components and phases present. Application of MULKOM to different fluid mixtures, such as water and air, or water, oil, and gas, is possible by means of appropriate `equation-of-state` (EOS) modules, which provide all thermophysical and transport parameters of the fluid mixture and the permeable medium as a function of a suitable set of primary thermodynamic variables. Investigations of thermal and hydrologic effects from emplacement of heat-generating nuclear wastes into partially water-saturated formations prompted the development and release of a specialized version of MULKOM for nonisothermal flow of water and air, named TOUGH. TOUGH is an acronym for `transport of unsaturated groundwater and heat` and is also an allusion to the tuff formations at Yucca Mountain, Nevada. The TOUGH2 code is intended to supersede TOUGH. It offers all the capabilities of TOUGH and includes a considerably more general subset of MULKOM modules with added capabilities. The paper briefly describes the simulation methodology and user features.

  19. An advanced modeling study on the impacts and atmospheric implications of multiphase dimethyl sulfide chemistry.

    Science.gov (United States)

    Hoffmann, Erik Hans; Tilgner, Andreas; Schrödner, Roland; Bräuer, Peter; Wolke, Ralf; Herrmann, Hartmut

    2016-10-18

    Oceans dominate emissions of dimethyl sulfide (DMS), the major natural sulfur source. DMS is important for the formation of non-sea salt sulfate (nss-SO4(2-)) aerosols and secondary particulate matter over oceans and thus, significantly influence global climate. The mechanism of DMS oxidation has accordingly been investigated in several different model studies in the past. However, these studies had restricted oxidation mechanisms that mostly underrepresented important aqueous-phase chemical processes. These neglected but highly effective processes strongly impact direct product yields of DMS oxidation, thereby affecting the climatic influence of aerosols. To address these shortfalls, an extensive multiphase DMS chemistry mechanism, the Chemical Aqueous Phase Radical Mechanism DMS Module 1.0, was developed and used in detailed model investigations of multiphase DMS chemistry in the marine boundary layer. The performed model studies confirmed the importance of aqueous-phase chemistry for the fate of DMS and its oxidation products. Aqueous-phase processes significantly reduce the yield of sulfur dioxide and increase that of methyl sulfonic acid (MSA), which is needed to close the gap between modeled and measured MSA concentrations. Finally, the simulations imply that multiphase DMS oxidation produces equal amounts of MSA and sulfate, a result that has significant implications for nss-SO4(2-) aerosol formation, cloud condensation nuclei concentration, and cloud albedo over oceans. Our findings show the deficiencies of parameterizations currently used in higher-scale models, which only treat gas-phase chemistry. Overall, this study shows that treatment of DMS chemistry in both gas and aqueous phases is essential to improve the accuracy of model predictions.

  20. Computation of thermal properties via 3D homogenization of multiphase materials using FFT-based accelerated scheme

    CERN Document Server

    Lemaitre, Sophie; Choi, Daniel; Karamian, Philippe

    2015-01-01

    In this paper we study the thermal effective behaviour for 3D multiphase composite material consisting of three isotropic phases which are the matrix, the inclusions and the coating media. For this purpose we use an accelerated FFT-based scheme initially proposed in Eyre and Milton (1999) to evaluate the thermal conductivity tensor. Matrix and spherical inclusions media are polymers with similar properties whereas the coating medium is metallic hence better conducting. Thus, the contrast between the coating and the others media is very large. For our study, we use RVEs (Representative volume elements) generated by RSA (Random Sequential Adsorption) method developed in our previous works, then, we compute effective thermal properties using an FFT-based homogenization technique validated by comparison with the direct finite elements method. We study the thermal behaviour of the 3D-multiphase composite material and we show what features should be taken into account to make the computational approach efficient.

  1. THREE DIMENSIONAL MULTIPHASE COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF VENTILATED SUPERCAVITATION

    Institute of Scientific and Technical Information of China (English)

    YANG Wugang; ZHANG Yuwen; YANG Jie; ZUO Liankai

    2008-01-01

    For some vehicles travelling through water, it is advantageous to cover the vehicle in a supercavity for the sake of reducing the drag acting on it. The method of artificial ventilation is most effective for generating and dominating the supercavity. This paper focuses on the numerical simulation of flow field around three dimensional body. The method is based on the multiphase computational fluid dynamics (CFD) model combined with the turbulence model and the full cavity model. The flow field of cavity is simulated by solving the compressible Navier-Stokes equations. The fundamental similarity parameters of ventilated supercavitaty flows that include cavitation number, Froude number, ventilation rate and drag coefficient are all investigated numerically in the case of steady flow and gravity field. We discuss the following simulations results in section 3: The variations of the cavitation number and the supercavity's relative diameter with ventilation rate (subtopic 3.1); The drag coefficient versus the cavitation number (subtopic 3.2); Deformation of supercavity axis caused by gravitational effect for three different fixed Froude numbers-2.8, 3.4, 4.2 (subtopic 3.3). In subtopic 3.2, we give the comparison results of the drag reduction ratio among numerical simulation and experiment conducted in hydrodynamic tunnel and towing tank respectively. In subtopic 3.3, we summarize our discussion of gravitational effect on the axis deformation of supercavity as follows: In the case of smaller Froude number, the inclination of the cavity axis increases monotonously with increasing horizontal length, and reaches its maximal value at the end of supercavity; This deformation can be almost completely negligible when the Froude number Fr>7. The comparisons with the experimental data in the hydrodynamic tunnel and the towing tank indicate that the present method is effective for predicting the flows around ventilated supercavity; that the numerical results is in good agreement

  2. Qualification of CFD-models for multiphase flows

    Energy Technology Data Exchange (ETDEWEB)

    Lucas, Dirk [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany)

    2016-05-15

    While Computational Fluid Dynamics (CFD) is already an accepted industrial tool for single phase flows it is not yet mature for two-phase flows. For this reason the qualification of CFD for reactor safety relevant applications which involve multiphase flows is a present topic of research. At the CFD division of Helmholtz-Zentrum Dresden-Rossendorf (HZDR) hereby beside an application-oriented model development and validation also more generic investigations are done. Thus, the baseline model strategy aims on the consolidation of the CFD-modelling for multiphase to enable reliable predictions for well-defined flow pattern in future. In addition the recently developed GENTOP-concept broadens the range of applicability of CFD. Different flow morphologies including transitions between them can be considered in frame of this concept.

  3. Multiphase Image Segmentation Using the Deformable Simplicial Complex Method

    DEFF Research Database (Denmark)

    Dahl, Vedrana Andersen; Christiansen, Asger Nyman; Bærentzen, Jakob Andreas

    2014-01-01

    The deformable simplicial complex method is a generic method for tracking deformable interfaces. It provides explicit interface representation, topological adaptivity, and multiphase support. As such, the deformable simplicial complex method can readily be used for representing active contours in...... in image segmentation based on deformable models. We show the benefits of using the deformable simplicial complex method for image segmentation by segmenting an image into a known number of segments characterized by distinct mean pixel intensities.......The deformable simplicial complex method is a generic method for tracking deformable interfaces. It provides explicit interface representation, topological adaptivity, and multiphase support. As such, the deformable simplicial complex method can readily be used for representing active contours...

  4. Tabular Multiphase Equations of State for Metals and Their Applications

    Science.gov (United States)

    Levashov, Pavel R.; Khishchenko, Konstantin V.

    2007-12-01

    We present a method of interpolation of thermodynamic functions calculated by means of a multiphase equation of state for metals. The method takes into account melting, evaporation and sublimation phase transitions. It can be also applied in metastable regions of phase diagram including those under negative pressures. The method allows one to unambiguously determine the phase state of a given point of phase diagram. Several applications of the tabular multiphase equations of state are considered: simulation of the initial stage of electrical explosion of metal wires, formation of striations, interaction of intense laser pulses with matter etc. Information about phase state in every point of the flux allows us to study phase transition waves, apply different destruction criteria and analyze processes in metastable regions.

  5. Annihilation Radiation Gauge for Relative Density and Multiphase Fluid Monitoring

    Directory of Open Access Journals (Sweden)

    Vidal A.

    2014-03-01

    Full Text Available The knowledge of the multi-phase flow parameters are important for the petroleum industry, specifically during the transport in pipelines and network related to exploitation’s wells. Crude oil flow is studied by Monte Carlo simulation and experimentally to determine transient liquid phase in a laboratory system. Relative density and fluid phase time variation is monitored employing a fast nuclear data acquisition setup that includes two large volume BaF2 scintillator detectors coupled to an electronic chain and data display in a LabView® environment. Fluid parameters are determined by the difference in count rate of coincidence pulses. The operational characteristics of the equipment indicate that 2 % deviation in the CCR corresponds to a variation, on average, of 20 % in the fraction of liquid of the multiphase fluid.

  6. Multi-Phase Modeling of Rainbird Water Injection

    Science.gov (United States)

    Vu, Bruce T.; Moss, Nicholas; Sampson, Zoe

    2014-01-01

    This paper describes the use of a Volume of Fluid (VOF) multiphase model to simulate the water injected from a rainbird nozzle used in the sound suppression system during launch. The simulations help determine the projectile motion for different water flow rates employed at the pad, as it is critical to know if water will splash on the first-stage rocket engine during liftoff.

  7. Multiphase Image Segmentation Using the Deformable Simplicial Complex Method

    DEFF Research Database (Denmark)

    Dahl, Vedrana Andersen; Christiansen, Asger Nyman; Bærentzen, Jakob Andreas

    2014-01-01

    The deformable simplicial complex method is a generic method for tracking deformable interfaces. It provides explicit interface representation, topological adaptivity, and multiphase support. As such, the deformable simplicial complex method can readily be used for representing active contours...... in image segmentation based on deformable models. We show the benefits of using the deformable simplicial complex method for image segmentation by segmenting an image into a known number of segments characterized by distinct mean pixel intensities....

  8. Multiphase Flow of Immiscible Fluids on Unstructured Moving Meshes

    DEFF Research Database (Denmark)

    Misztal, Marek Krzysztof; Erleben, Kenny; Bargteil, Adam;

    2013-01-01

    In this paper, we present a method for animating multiphase flow of immiscible fluids using unstructured moving meshes. Our underlying discretization is an unstructured tetrahedral mesh, the deformable simplicial complex (DSC), that moves with the flow in a Lagrangian manner. Mesh optimization op...... complement and solve our optimization on the GPU. We provide the results of parameter studies as well as a performance analysis of our method, together with suggestions for performance optimization....

  9. Multi-Phase Galaxy Formation and Quasar Absorption Systems

    OpenAIRE

    Maller, Ariyeh H.

    2005-01-01

    The central problem of galaxy formation is understanding the cooling and condensation of gas in dark matter halos. It is now clear that to match observations this requires further physics than the simple assumptions of single phase gas cooling. A model of multi-phase cooling (Maller & Bullock 2004) can successfully account for the upper cutoff in the masses of galaxies and provides a natural explanation of many types of absorption systems (Mo & Miralda-Escude 1996). Absorption systems are our...

  10. High performance low cost steels with ultrafine grained and multi-phased microstructure

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Ultrafine grained ferrite was obtained through tempering cold rolled martensite with an average grain size of 200―400 nm in a low carbon and a microalloyed steel. Thermal and mechanical stability of the two steels was studied. Due to the pinning effect of microalloyed precipitates on the movement of dislocations and grain boundaries, the recrystallization and grain growth rate were retarded, and the thermal stability of ultrafine grained microstructure was improved. The ultrafine grained ferritic steel was strengthened, but its strain hardening rate was reduced. It seems that the tiny carbide precipitates have no significant effect on work hardening rate. The ultrafine grained ferrite+martensite dual phase microstructure was obtained in the microalloyed steel through intercritically annealing cold rolled martensite. The resulting multiphase microstructure has a tensile strength higher than 1.0 GPa with a yield ratio lower than 0.7. Another type of multiphase microstructure with nanoscaled lath bainite+ retained austenite was obtained through an isothermal heat treatment in low temperature bainite transformation region in high carbon steel. The tensile strength was as high as 1.64 GPa with a yield ratio of 0.84.

  11. CHARACTERISATION OF MULTIPHASE FLUID-STRUCTURE INTERACTION USING NON-INTRUSIVE OPTICAL TECHNIQUES

    Directory of Open Access Journals (Sweden)

    M. AL-ATABI

    2011-04-01

    Full Text Available The purpose of this study is to determine experimentally the effectiveness of passive drag reduction techniques (which involve adjusting surface geometry within a chaotic multiphase flow system. To quantify the intrusion and disturbance caused, a liquid-air blast atomiser continuously discharges within a test section of air at atmospheric pressure, with a circular cylinder placed 25 cylinder diameters (250 mm downstream of the nozzle. This cylinder is then replaced with other cylinders which have modified surface geometry. The data was obtained using Particle Image Velocimetry (PIV and determines the fluid motion resulting from spray structure interaction of a liquid spray with a circular cylinder. Subtraction of non intruded spray images from intruded spray images at the same locations, using the time averaged analysis allows the direct comparison of the amount of disturbance each geometric variant has on the spray. Using this data alongside velocity profiles time averaged trends were compared. Drag reduction from V-shaped grooves provides the greatest disturbance reduction. This is due to the reduced shear stress around its cross section and the addition of small liquid eddies within each V-groove creates a gliding surface. These features proved to be most effective when monitoring drag reduction in multiphase flow-structure interaction.

  12. MULTI-SCALE AND MULTI-PHASE NANOCOMPOSITE CERAMIC TOOLS AND CUTTING PERFORMANCE

    Institute of Scientific and Technical Information of China (English)

    HUANG Chuanzhen; LIU Hanlian; WANG Jun; WANG Hui

    2007-01-01

    An advanced ceramic cutting tool material Al2O3/TiC/TiN (LTN) is developed by incorporation and dispersion of micro-scale TiC particle and nano-scale TiN particle in alumina matrix. With the optimal dispersing and fabricating technology, this multi-scale and multi-phase nanocomposite ceramic tool material can get both higher flexural strength and fracture toughness than that of Al2O3/TiC (LT) ceramic tool material without nano-scale TiN particle, especially the fracture toughness can reach to 7.8 MPa·m0.5. The nano-scale TiN can lead to the grain fining effect and promote the sintering process to get a higher density. The coexisting transgranular and intergranular fracture mode induced by micro-scale TiC and nano-scale TiN, and the homogeneous and densified microstructure can result in a remarkable strengthening and toughening effect. The cutting performance and wear mechanisms of the advanced multi-scale and multi-phase nanocomposite ceramic cutting tool are researched.

  13. Examples of the Potential of DNS for the Understanding of Reactive Multiphase Flows

    Directory of Open Access Journals (Sweden)

    J. Reveillon

    2011-03-01

    Full Text Available The objective of this article is to point out the ability of the multiphase flow DNS (Direct Numerical Simulation to help to understand basic physics and to interpret some experimental observations. To illustrate the DNS' potential to give access to key phenomena involved in reactive multiphase flows, several recent results obtained by the authors are summed up with a bridge to experimental results. It includes droplet dispersion, laminar spray flame instability, spray combustion regimes or acoustic modulation effect on a two-phase flow Bunsen burner. As a perspective, two-phase flow DNS auto-ignition is considered thanks to a skeletal mechanism for the n-heptane chemistry involving 29 species and 52 reactions. Results highlight evaporating droplet effects on the auto-ignition process that is generally dramatically modified by spray distribution resulting from the turbulent fluid motion. This paper shows that DNS is a powerful tool to understand the intricate coupling between the evaporating spray, the turbulent fluid motion and the detailed chemistry, inseparable in the experimental context.

  14. Microstructure-based modelling of multiphase materials and complex structures

    Science.gov (United States)

    Werner, Ewald; Wesenjak, Robert; Fillafer, Alexander; Meier, Felix; Krempaszky, Christian

    2016-09-01

    Micromechanical approaches are frequently employed to monitor local and global field quantities and their evolution under varying mechanical and/or thermal loading scenarios. In this contribution, an overview on important methods is given that are currently used to gain insight into the deformational and failure behaviour of multiphase materials and complex structures. First, techniques to represent material microstructures are reviewed. It is common to either digitise images of real microstructures or generate virtual 2D or 3D microstructures using automated procedures (e.g. Voronoï tessellation) for grain generation and colouring algorithms for phase assignment. While the former method allows to capture exactly all features of the microstructure at hand with respect to its morphological and topological features, the latter method opens up the possibility for parametric studies with respect to the influence of individual microstructure features on the local and global stress and strain response. Several applications of these approaches are presented, comprising low and high strain behaviour of multiphase steels, failure and fracture behaviour of multiphase materials and the evolution of surface roughening of the aluminium top metallisation of semiconductor devices.

  15. Hydrodynamical Coupling of Mass and Momentum in Multiphase Galactic Winds

    CERN Document Server

    Schneider, Evan E

    2016-01-01

    Using a set of high resolution hydrodynamical simulations run with the Cholla code, we investigate how mass and momentum couple to the multiphase components of galactic winds. The simulations model the interaction between a hot wind driven by supernova explosions and a cooler, denser cloud of interstellar or circumgalactic media. By resolving scales of $\\Delta x 100$ pc distances our calculations capture how the cloud disruption leads to a distribution of densities and temperatures in the resulting multiphase outflow, and quantify the mass and momentum associated with each phase. We find the multiphase wind contains comparable mass and momenta in phases over a wide range of densities extending from the hot wind $(n \\approx 10^{-3}$ $\\mathrm{cm}^{-3})$ to the coldest components $(n \\approx 10^2$ $\\mathrm{cm}^{-3})$. We further find that the momentum distributes roughly in proportion to the mass in each phase, and the mass-loading of the hot phase by the destruction of cold, dense material is an efficient proc...

  16. Numerical modeling of a compressible multiphase flow through a nozzle

    Science.gov (United States)

    Niedzielska, Urszula; Rabinovitch, Jason; Blanquart, Guillaume

    2012-11-01

    New thermodynamic cycles developed for more efficient low temperature resource utilization can increase the net power production from geothermal resources and sensible waste heat recovery by 20-40%, compared to the traditional organic Rankine cycle. These improved systems consist of a pump, a liquid heat exchanger, a two-phase turbine, and a condenser. The two-phase turbine is used to extract energy from a high speed multiphase fluid and consists of a nozzle and an axial impulse rotor. In order to model and optimize the fluid flow through this part of the system an analysis of two-phase flow through a specially designed convergent-divergent nozzle has to be conducted. To characterize the flow behavior, a quasi-one-dimensional steady-state model of the multiphase fluid flow through a nozzle has been constructed. A numerical code capturing dense compressible multiphase flow under subsonic and supersonic conditions and the coupling between both liquid and gas phases has been developed. The output of the code delivers data vital for the performance optimization of the two-phase nozzle.

  17. Mixing and reactions in multiphase flow through porous media

    Science.gov (United States)

    Jimenez-Martinez, J.; Le Borgne, T.; Meheust, Y.; Porter, M. L.; De Anna, P.; Hyman, J.; Tabuteau, H.; Turuban, R.; Carey, J. W.; Viswanathan, H. S.

    2016-12-01

    The understanding and quantification of flow and transport processes in multiphase systems remains a grand scientific and engineering challenge in natural and industrial systems (e.g., soils and vadose zone, CO2 sequestration, unconventional oil and gas extraction, enhanced oil recovery). Beyond the kinetic of the chemical reactions, mixing processes in porous media play a key role in controlling both fluid-fluid and fluid-solid reactions. However, conventional continuum-scale models and theories oversimplify and/or ignore many important pore-scale processes. Multiphase flows, with the creation of highly heterogeneous fluid velocity fields (i.e., low velocities regions or stagnation zones, and high velocity regions or preferential paths), makes conservative and reactive transport more complex. We present recent multi-scale experimental developments and theoretical approaches to quantify transport, mixing, and reaction and their coupling with multiphase flows. We discuss our main findings: i) the sustained concentration gradients and enhanced reactivity in a two-phase system for a continuous injection, and the comparison with a pulse line injection; ii) the enhanced mixing by a third mobile-immiscible phase; and iii) the role that capillary forces play in the localization of the fluid-solid reactions. These experimental results are for highly-idealized geometries, however, the proposed models are related to basic porous media and unsaturated flow properties, and could be tested on more complex systems.

  18. Modeling hyperelasticity in non-equilibrium multiphase flows

    Science.gov (United States)

    Hank, Sarah; Favrie, Nicolas; Massoni, Jacques

    2017-02-01

    The aim of this article is the construction of a multiphase hyperelastic model. The Eulerian formulation of the hyperelasticity represents a system of 14 conservative partial differential equations submitted to stationary differential constraints. This model is constructed with an elegant approach where the specific energy is given in separable form. The system admits 14 eigenvalues with 7 characteristic eigenfields. The associated Riemann problem is not easy to solve because of the presence of 7 waves. The shear waves are very diffusive when dealing with the full system. In this paper, we use a splitting approach to solve the whole system using 3 sub-systems. This method reduces the diffusion of the shear waves while allowing to use a classical approximate Riemann solver. The multiphase model is obtained by adapting the discrete equations method. This approach involves an additional equation governing the evolution of a phase function relative to the presence of a phase in a cell. The system is integrated over a multiphase volume control. Finally, each phase admits its own equations system composed of three sub-systems. One and three dimensional test cases are presented.

  19. Shock Initiated Reactions of Reactive Multiphase Blast Explosives

    Science.gov (United States)

    Wilson, Dennis; Granier, John; Johnson, Richard; Littrell, Donald

    2015-06-01

    This paper describes a new class of reactive multiphase blast explosives (RMBX) and characterization of their blast characteristics. These RMBXs are non-ideal explosive compositions of perfluoropolyether (PFPE), nano aluminum, and a micron-size high-density reactive metal - Tantalum, Zirconium, or Zinc in mass loadings of 66 to 83 percent. Unlike high explosives, these PFPE-metal compositions release energy via a fast self-oxidized combustion wave (rather than a true self-sustaining detonation) that is shock dependent, and can be overdriven to control energy release rate. The term ``reactive multiphase blast'' refers to the post-dispersion blast behavior: multiphase in that there are a gas phase that imparts pressure and a solid (particulate) phase that imparts momentum; and reactive in that the hot metal particles react with atmospheric oxygen and the explosive gas products to give an extended pressure pulse. The RMBX formulations were tested in two spherical core-shell geometries - an RMBX shell exploded by a high explosive core, and an RMBX core imploded by a high explosive shell. The fireball and blast characteristics were compared to a C-4 baseline charge.

  20. Melt processed multiphase ceramic waste forms for nuclear waste immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Amoroso, Jake, E-mail: jake.amoroso@srs.gov [Savannah River National Laboratory, Aiken, SC 29808 (United States); Marra, James C. [Savannah River National Laboratory, Aiken, SC 29808 (United States); Tang, Ming [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Lin, Ye; Chen, Fanglin [University of South Carolina, Columbia, SC 29208 (United States); Su, Dong [Brookhaven National Laboratory, Upton, NY 11973 (United States); Brinkman, Kyle S. [Clemson University, Clemson, SC 29634 (United States)

    2014-11-15

    Highlights: • We explored the feasibility of melt processing multiphase titanate-based ceramics. • Melt processing produced phases obtained by alternative processing methods. • Phases incorporated multiple lanthanides and transition metals. • Processing in reducing atmosphere suppressed un-desirable Cs–Mo coupling. • Cr partitions to and stabilizes the hollandite phase, which promotes Cs retention. - Abstract: Ceramic waste forms are promising hosts for nuclear waste immobilization as they have the potential for increased durability and waste loading compared with conventional borosilicate glass waste forms. Ceramics are generally processed using hot pressing, spark plasma sintering, and conventional solid-state reaction, however such methods can be prohibitively expensive or impractical at production scales. Recently, melt processing has been investigated as an alternative to solid-state sintering methods. Given that melter technology is currently in use for High Level Waste (HLW) vitrification in several countries, the technology readiness of melt processing appears to be advantageous over sintering methods. This work reports the development of candidate multi-phase ceramic compositions processed from a melt. Cr additions, developed to promote the formation and stability of a Cs containing hollandite phase were successfully incorporated into melt processed multi-phase ceramics. Control of the reduction–oxidation (Redox) conditions suppressed undesirable Cs–Mo containing phases, and additions of Al and Fe reduced the melting temperature.

  1. A Virtual Reality Technique for Multi-phase Flows

    Science.gov (United States)

    Loth, Eric; Sherman, William; Auman, Aric; Navarro, Christopher

    2004-04-01

    A virtual reality (VR) technique has been developed to allow user immersion (stereo-graphic rendering, user tracking and object interactivity) in generic unsteady three-dimensional multi-phase flow data sets. This article describes the structure and logic used to design and construct a VR technique that employs a multi-phase flow-field computed a priori as an input (i.e. simulations are conducted beforehand with a researcher's multi-phase CFD code). The input field for this flow visualization is divided into two parts: the Eulerian three-dimensional grid nodes and velocities for the continuous fluid properties (specified using conventional TECLOT data format) and the Lagrangian time-history trajectory files for the dispersed fluid. While tracking the dispersed phase trajectories as animated spheres of adjustable size and number, the continuous-phase flow can be simultaneously rendered with velocity vectors, iso-contour surfaces and planar flood-contour maps of different variables. The geometric and notional view of the combined visualization of both phases is interactively controlled throughout a user session. The resulting technique is demonstrated with a 3-D unsteady data set of Lagrangian particles dispersing in a Eulerian description of a turbulent boundary layer, stemming from a direct numerical simulation of the Navier-Stokes equations.

  2. High Output Voltage Based Multiphase Step-Up DC-DC Converter Topology with Voltage Doubler Rectifiers

    Directory of Open Access Journals (Sweden)

    Liao Xiaozhong

    2013-02-01

    Full Text Available High Output Voltage Based Multiphase Step-Up DC-DC Converter topology with voltage doubler rectifiers is presented in this paper. High output voltage is obtained due to the series combination of voltage doubler rectifiers on the secondary side of high frequency transformers. This topology is useful in the application where the output voltage is greater than the input. The two loop control strategy has been developed in order to analyze the stable and effective working of the converter topology. Therefore the working mode analysis of the converter topology has been described in detail. The multiphase step-up DC-DC converter topology is first simulated on MATLAB and then a prototype has been designed in order to verify the simulation and experimental results. Finally the simulation and experimental results are found to be satisfactory.

  3. A comparative study for the effectiveness of the image by multiphase CT enterography among three scan phases%不同扫描时相小肠CT造影显示效能研究

    Institute of Scientific and Technical Information of China (English)

    李京津; 徐国萍; 夏庆来; 刘莹莹; 张雪宁; 牛冬梅; 刘梁生

    2015-01-01

    Objective To evaluate the influence of the CT enterography (CTE) in different scan phases of small intesti⁃nal wall and arteriovenous vessels, and to confirm the diagnostic efficiency thereof. Methods A total of 286 patients under⁃went CTE were collected, and their CT image of three scan phases, including 20 s, 40 s and 60 s after injection, were record⁃ed. Values of reinforcement of the intestinal wall and arteriovenous enhancing degree in all phases were collected. A statisti⁃cal analysis was used to confirm the best phase for showing the structure. The diagnostic efficiency of the best phase of CT image was evaluated for the clinical diagnosis of small intestine and vascular lesions. Results (1) The CT value of the small intestinal wall in the intestinal phase was significantly higher than other two phases (Pintestinal phase, and there is no statistical difference between the intestinal phase and oth⁃er two phases. The result of CT value of ileum vein showed that intestinal phase>portal phase>arterial phase (P<0.05). (3) The sensitivity was 95.8%, the specificity was 94.9%, the accuracy was 95.1%, the positive predictive value was 79.3%and the negative predictive value was 99.1%using CT image of intestinal period for diagnosing small intestinal diseases. (4) The intestinal period showed small intestinal lesions and confirmed by pathology including 22 cases of small intestinal lympho⁃ma, 10 cases of stromal tumor, 1 case adenoma, cavernous 3 cases hemangioma and 8 cases of Crohn's disease. The diagno⁃sis of hemangioma should be combined with arterial phase. Conclusion Small intestinal wall and blood vessels have better display performance in the intestinal phase of multiphase CT enterography, using the arterial phase and intestinal phase scan⁃ning, we can make an accurate diagnosis for the majority of small intestinal diseases.%目的:比较CT造影在不同扫描时相下对小肠肠壁及血管的显示效果,确定最佳扫描时相,评

  4. Numerical simulation of complex multi-phase fluid of casting process and its applications

    Institute of Scientific and Technical Information of China (English)

    CHEN Li-liang; LIU Rui-xiang; C. Beckermann

    2006-01-01

    The fluid of casting process is a typical kind of multi-phase flow. Actually, many casting phenomena have close relationship with the multi-phase flow, such as molten metal filling process, air entrapment, slag movement, venting process of die casting, gas escaping of lost foam casting and so on. Obviously, in order to analyze these phenomena accurately,numerical simulation of the multi-phase fluid is necessary. Unfortunately, so far, most of the commercial casting simulation systems do not have the ability of multi-phase flow modeling due to the difficulty in the multi-phase flow calculation. In the paper, Finite Different Method (FDM) technique was adopt to solve the multi-phase fluid model. And a simple object of the muiti-phase fluid was analyzed to obtain the fluid rates of the liquid phase and the entrapped air phase.

  5. Multiphase permittivity imaging using absolute value electrical capacitance tomography data and a level set algorithm.

    Science.gov (United States)

    Al Hosani, E; Soleimani, M

    2016-06-28

    Multiphase flow imaging is a very challenging and critical topic in industrial process tomography. In this article, simulation and experimental results of reconstructing the permittivity profile of multiphase material from data collected in electrical capacitance tomography (ECT) are presented. A multiphase narrowband level set algorithm is developed to reconstruct the interfaces between three- or four-phase permittivity values. The level set algorithm is capable of imaging multiphase permittivity by using one set of ECT measurement data, so-called absolute value ECT reconstruction, and this is tested with high-contrast and low-contrast multiphase data. Simulation and experimental results showed the superiority of this algorithm over classical pixel-based image reconstruction methods. The multiphase level set algorithm and absolute ECT reconstruction are presented for the first time, to the best of our knowledge, in this paper and critically evaluated. This article is part of the themed issue 'Supersensing through industrial process tomography'. © 2016 The Author(s).

  6. Numerical simulation of complex multi-phase fluid of casting process and its applications

    Directory of Open Access Journals (Sweden)

    CHEN Li-liang

    2006-05-01

    Full Text Available The fluid of casting process is a typical kind of multi-phase flow. Actually, many casting phenomena have close relationship with the multi-phase flow, such as molten metal filling process, air entrapment, slag movement, venting process of die casting, gas escaping of lost foam casting and so on. Obviously, in order to analyze these phenomena accurately, numerical simulation of the multi-phase fluid is necessary. Unfortunately, so far, most of the commercial casting simulation systems do not have the ability of multi-phase flow modeling due to the difficulty in the multi-phase flow calculation. In the paper, Finite Different Method (FDM technique was adopt to solve the multi-phase fluid model. And a simple object of the muiti-phase fluid was analyzed to obtain the fluid rates of the liquid phase and the entrapped air phase.

  7. Comparative analysis of volumetric flow meters used for mass flow estimation in multiphase and multidensity environments

    Science.gov (United States)

    Pedone, Richard; Korman, Valentin; Wiley, John T.

    2006-05-01

    Accurate and reliable multiphase flow measurements are needed for liquid propulsion systems. Existing volumetric flow meters are adequate for flow measurements with well-characterized, clean liquids and gases. However, these technologies are inadequate for multiphase environments, such as cryogenic fluids. Although, properly calibrated turbine flow meters can provide highly accurate and repeatable data, problems are still prevalent with multiphase flows. Limitations are thus placed on the applicability of intrusive turbine flow meters.

  8. Design of Parallel Electrical Resistance Tomography System for Measuring Multiphase Flow

    Institute of Scientific and Technical Information of China (English)

    董峰; 许聪; 张志强; 任尚杰

    2012-01-01

    ERT(electrical resistance tomography) is effective method for visualization of multiphase flows,offering some advantages of rapid response and low cost,so as to explore the transient hydrodynamics.Aiming at this target,a fully programmable and reconfigurable FPGA(field programmable gate array)-based Compact PCI(peripheral component interconnect) bus linked sixteen-channel ERT system has been presented.The data acquisition system is carefully designed with function modules of signal generator module;Compact PCI transmission module and data processing module(including data sampling,filtering and demodulating).The processing module incorporates a powerful FPGA with Compact PCI bus for communication,and the measurement process management is conducted in FPGA.Image reconstruction algorithms with different speed and accuracy are also coded for this system.The system has been demonstrated in real time(1400 frames per second for 50 kHz excitation) with signal-noise-ratio above 62 dB and repeatability error below 0.7%.Static experiments have been conducted and the images manifested good resolution relative to the actual object distribution.The parallel ERT system has provided alternative experimental platform for the multiphase flow measurements by the dynamic experiments in terms of concentration and velocity.

  9. An open-source toolbox for multiphase flow in porous media

    Science.gov (United States)

    Horgue, P.; Soulaine, C.; Franc, J.; Guibert, R.; Debenest, G.

    2015-02-01

    Multiphase flow in porous media provides a wide range of applications: from the environmental understanding (aquifer, site-pollution) to industrial process improvements (oil production, waste management). Modeling of such flows involves specific volume-averaged equations and therefore specific computational fluid dynamics (CFD) tools. In this work, we develop a toolbox for modeling multiphase flow in porous media with OpenFOAM®, an open-source platform for CFD. The underlying idea of this approach is to provide an easily adaptable tool that can be used in further studies to test new mathematical models or numerical methods. The package provides the most common effective properties models of the literature (relative permeability, capillary pressure) and specific boundary conditions related to porous media flows. To validate this package, solvers based on the IMplicit Pressure Explicit Saturation (IMPES) method are developed in the toolbox. The numerical validation is performed by comparison with analytical solutions on academic cases. Then, a satisfactory parallel efficiency of the solver is shown on a more complex configuration.

  10. Electrical properties of multiphase composites based on carbon nanotubes and an optimized clay content

    Science.gov (United States)

    Egiziano, Luigi; Lamberti, Patrizia; Spinelli, Giovanni; Tucci, Vincenzo; Guadagno, Liberata; Vertuccio, Luigi

    2016-05-01

    The experimental results concerning the characterization of a multiphase nanocomposite systems based on epoxy matrix, loaded with different amount of multi-walled carbon nanotubes (MWCNTs) and an optimized Hydrotalcite (HT) clay content (i.e. 0.6 wt%), duly identified by an our previous theoretical study based on Design of Experiment (DoE), are presented. Dynamic-mechanical analysis (DMA) reveal that even the introduction of higher HT loading (up to 1%wt) don't affect significantly the mechanical properties of the nanocomposites while morphological investigations show an effective synergy between clay and carbon nanotubes that leads to peculiar micro/nanostructures that favor the creation of the electrical conductive network inside the insulating resin. An electrical characterization is carried out in terms of DC electrical conductivity, percolation threshold (EPT) and frequency response in the range 10Hz-1MHz. In particular, the measurements of the DC conductivity allow to obtain the typical "percolation" curve also found for classical CNT-polymer mixtures and a value of about 2 S/m for the electrical conductivity is achieved at the highest considered CNTs concentration (i.e. 1 wt%). The results suggest that multiphase nanocomposites obtained incorporating dispersive nanofillers, in addition to the conductive one, may be a valid alternative to the polymer blends, to improve the properties of the polymeric materials thus able to meet high demands, particularly concerning their mechanical and thermal stability and electrical features required in the aircraft engineering.

  11. The impact of multiphase reactions of NO2 with aromatics: a modelling approach

    Directory of Open Access Journals (Sweden)

    N. Lahoutifard

    2002-01-01

    Full Text Available The impact of multiphase reactions involving nitrogen dioxide (NO2 and aromatic compounds was simulated in this study. A mechanism (CAPRAM 2.4, MODAC Mechanism was applied for the aqueous phase reactions, whereas RACM was applied for the gas phase chemistry. Liquid droplets were considered as monodispersed with a mean radius of 0.1 µm and a liquid content (LC of 50 µg m-3. The multiphase mechanism has been further extended to the chemistry of aromatics, i.e. reactions involving benzene, toluene, xylene, phenol and cresol have been added. In addition, reaction of NO2 with dissociated hydroxyl substituted aromatic compounds has also been implemented. These reactions proceed through charge exchange leading to nitrite ions and therefore to nitrous acid formation. The strength of this source was explored under urban polluted conditions. It was shown that it may increase gas phase HONO levels under some conditions and that the extent of this effect is strongly pH dependent. Especially under moderate acidic conditions (i.e. pH above 4 this source may represent more than 75% of the total HONO/NO2 - production rate, but this contribution drops down close to zero in acidic droplets (as those often encountered in urban environments.

  12. Low-dose multiphase abdominal CT reconstruction with phase-induced swap prior

    Science.gov (United States)

    Selim, Mona; Rashed, Essam A.; Kudo, Hiroyuki

    2016-10-01

    Multiphase abdominal CT is an imaging protocol in which the patient is scanned at different phases before and after the injection of a contrast agent. Reconstructed images with different concentrations of contrast material provide useful information for effective detection of abnormalities. However, several scanning during a short period of time eventually increase the patient radiation dose to a remarkable value up to a risky level. Reducing the patient dose by modulating the x-ray tube current or acquiring the projection data through a small number of views are known to degrade the image quality and reduce the possibility to be useful for diagnosis purpose. In this work, we propose a novel multiphase abdominal CT imaging protocol with patient dose reduction and high image quality. The image reconstruction cost function consists of two terms, namely the data fidelity term and penalty term to enforce the anatomical similarity in successive contrast phase reconstruction. The prior information, named phase-induced swap prior (PISP) is computed using total variation minimization of image acquired from different contrast phases. The new method is evaluated through a simulation study using digital abdominal phantom and real data and results are promising.

  13. Modelling of composition and phase changes in multiphase alloys due to growth of an oxide layer

    Energy Technology Data Exchange (ETDEWEB)

    Nijdam, T.J. [Materials Innovation Institute (M2i) and Department of Materials Science and Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft (Netherlands); Sloof, W.G. [Materials Innovation Institute (M2i) and Department of Materials Science and Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft (Netherlands)], E-mail: w.g.sloof@tudelft.nl

    2008-10-15

    A coupled thermodynamic-kinetic oxidation model is presented for the selective, external oxidation of the most reactive alloy constituent of a multicomponent multiphase alloy. The model computes the composition depth profiles of the alloy constituents in the alloy as well as the evolution in the phase fractions in the alloy as function of oxidation time. The applicability of the model is illustrated through several examples. For the isothermal and cyclic oxidation of single- and two-phase binary alloys excellent agreement was obtained between the numerical calculations and the corresponding analytical solutions. For the isothermal oxidation of two {gamma}+{beta} NiCrAl alloys with different initial volume fractions of the {beta} phase, very good agreement was obtained between experimentally and calculated composition depth profiles. Finally, the effect of alloying additions on the phase evolution in the alloy was studied for the isothermal oxidation of freestanding MCrAlY (M = Ni, Co) coatings. It is shown that for a similar bulk Al and Cr content in the coating, the concentration profiles of Al in the coating after oxidation can be significantly affected by alloying with elements like Co, Ta and Re. Consequently, the multicomponent and multiphase character of the MCrAlY coating has to be taken into account when performing lifetime studies.

  14. Radiation stability test on multiphase glass ceramic and crystalline ceramic waste forms

    Science.gov (United States)

    Tang, Ming; Kossoy, Anna; Jarvinen, Gordon; Crum, Jarrod; Turo, Laura; Riley, Brian; Brinkman, Kyle; Fox, Kevin; Amoroso, Jake; Marra, James

    2014-05-01

    A radiation stability study was performed on glass ceramic and crystalline ceramic waste forms. These materials are candidate host materials for immobilizing alkali/alkaline earth (Cs/Sr-CS) + lanthanide (LN) + transition metal (TM) fission product waste streams from nuclear fuel reprocessing. In this study, glass ceramics were fabricated using a borosilicate glass as a matrix in which to incorporate CS/LN/TM combined waste streams. The major phases in these multiphase materials are powellite, oxyaptite, pollucite, celsian, and durable residual glass phases. Al2O3 and TiO2 were combined with these waste components to produce multiphase crystalline ceramics containing hollandite-type phases, perovskites, pyrochlores and other minor metal titanate phases. For the radiation stability test, selected glass ceramic and crystalline ceramic samples were exposed to different irradiation environments including low fluxes of high-energy (∼1-5 MeV) protons and alpha particles generated by an ion accelerator, high fluxes of low-energy (hundreds of keV) krypton particles generated by an ion implanter, and in-situ electron irradiations in a transmission electron microscope. These irradiation experiments were performed to simulate self-radiation effects in a waste form. Ion irradiation-induced microstructural modifications were examined using X-ray diffraction and transmission electron microscopy. Our preliminary results reveal different radiation tolerance in different crystalline phases under various radiation damage environments. However, their stability may be rate dependent which may limit the waste loading that can be achieved.

  15. Fluctuation-induced dynamics of multiphase liquid jets with ultra-low interfacial tension.

    Science.gov (United States)

    Sauret, Alban; Spandagos, Constantinos; Shum, Ho Cheung

    2012-09-21

    Control of fluid dynamics at the micrometer scale is essential to emulsion science and materials design, which is ubiquitous in everyday life and is frequently encountered in industrial applications. Most studies on multiphase flow focus on oil-water systems with substantial interfacial tension. Advances in microfluidics have enabled the study of multiphase flow with more complex dynamics. Here, we show that the evolution of the interface in a jet surrounded by a co-flowing continuous phase with an ultra-low interfacial tension presents new opportunities to the control of flow morphologies. The introduction of a harmonic perturbation to the dispersed phase leads to the formation of interfaces with unique shapes. The periodic structures can be tuned by controlling the fluid flow rates and the input perturbation; this demonstrates the importance of the inertial effects in flow control at ultra-low interfacial tension. Our work provides new insights into microfluidic flows at ultra-low interfacial tension and their potential applications.

  16. Lattice Boltzmann modeling of multiphase flows at large density ratio with an improved pseudopotential model

    CERN Document Server

    Li, Q; Li, X J

    2012-01-01

    Owing to its conceptual simplicity and computational efficiency, the pseudopotential multiphase lattice Boltzmann (LB) model has attracted significant attention since its emergence. In this work, we aim to extend the pseudopotential LB model to the simulations of multiphase flows at large density ratio and relatively high Reynolds number. First, based on our recent work [Li et al., Phys. Rev. E. 86, 016709 (2012)], an improved forcing scheme is proposed for the multiple-relaxation-time (MRT) pseudopotential LB model in order to achieve thermodynamic consistency and large density ratio in the model. Next, through investigating the effects of the parameter a in the Carnahan-Starling equation of state, we find that, as compared with a = 1, a = 0.25 is capable of greatly reducing the magnitude of the spurious currents at large density ratio. Furthermore, it is found that a lower liquid viscosity can be gained in the pseudopotential LB model by increasing the kinematic viscosity ratio between the vapor and liquid ...

  17. Stress-Induced Phase Transformation in Incompressible Materials and Stability of Multi-Phase Deformation

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The stress-induced phase transformation in incompressible materials and the interfacial stability of multi-phase deformation were studied. The existence of multi-phase deformation was determined through exploring whether the material would lose the strong ellipticity at some deformation gradient.Then, according to the stability criterion which is based on a quasi-static approach, the stability of the multi-phase deformation in incompressible materials was investigated by studying the growth/decay behaviour of the interface in the undeformed configuration when it is perturbed. At last, the way to define multi-phase deformation in incompressible materials was concluded and testified by a corresponding numerical example.

  18. Detection of small hepatocellular carcinoma: Comparison of dynamic enhancement magnetic resonance imaging and multiphase multirow-detector helical CT scanning

    Institute of Scientific and Technical Information of China (English)

    Hong Zhao; Jin-Lin Yao; Ying Wang; Kang-Rong Zhou

    2007-01-01

    AIM: To compare the gadolinium-enhanced multiphase dynamic magnetic resonance imaging (MRI) and multiphase multirow-detector helical CT (MDCT)scanning for detection of small hepatocellular carcinoma (HCC).METHODS: MDCT scanning and baseline MRI with SE T1-WI and T2-WI sequence combined with FMPSPGR sequence were performed in 37 patients with 43 small HCCs. Receiver operating characteristic (ROC) curves were plotted to analyze the results for modality.RESULTS: The areas below ROC curve (Az) were calculated. There was no statistical difference in dynamic enhancement MDCT and MRI. The detection rate of small HCC was 97.5%-97.6% on multiphase MDCT scanning and 90.7%-94.7% on MRI, respectively. The sensitivity of detection for small HCC on MDCT scanning was higher than that on dynamic enhancement MRI. The sensitivity of detection for minute HCC (tumor diameter ≤ 1 cm)was 90.0%-95.0% on MDCT scanning and 70.0%-85.0% on MRI, respectively.CONCLUSION: MDCT scanning should be performed for early detection and effective treatment of small HCC in patients with chronic hepatitis and cirrhosis during follow-up.

  19. Instantaneous equations for multiphase flow in porous media without length-scale restrictions using a non-local averaging volume

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa-Paredes, Gilberto, E-mail: gepe@xanum.uam.m [Area de Ingenieria en Recursos Energeticos, Universidad Autonoma Metropolitana-Iztapalapa, Av. San Rafael Atlixco 186, Col. Vicentina, Apartado Postal 55-535, Mexico D.F. 09340 (Mexico)

    2010-05-15

    The aim of this paper is to propose a framework to obtain a new formulation for multiphase flow conservation equations without length-scale restrictions, based on the non-local form of the averaged volume conservation equations. The simplification of the local averaging volume of the conservation equations to obtain practical equations is subject to the following length-scale restrictions: d << l << L, where d is the characteristic length of the dispersed phases, l is the characteristic length of the averaging volume, and L is the characteristic length of the physical system. If the foregoing inequality does not hold, or if the scale of the problem of interest is of the order of l, the averaging technique and therefore, the macroscopic theories of multiphase flow should be modified in order to include appropriate considerations and terms in the corresponding equations. In these cases the local form of the averaged volume conservation equations are not appropriate to describe the multiphase system. As an example of the conservation equations without length-scale restrictions, the natural circulation boiling water reactor was consider to study the non-local effects on the thermal-hydraulic core performance during steady-state and transient behaviors, and the results were compared with the classic local averaging volume conservation equations.

  20. Non-Isothermal, Multi-phase, Multi-component Flows through Deformable Methane Hydrate Reservoirs

    CERN Document Server

    Gupta, Shubhangi; Wohlmuth, Barbara

    2015-01-01

    We present a hydro-geomechanical model for subsurface methane hydrate systems. Our model considers kinetic hydrate phase change and non-isothermal, multi-phase, multi-component flow in elastically deforming soils. The model accounts for the effects of hydrate phase change and pore pressure changes on the mechanical properties of the soil, and also for the effect of soil deformation on the fluid-solid interaction properties relevant to reaction and transport processes (e.g., permeability, capillary pressure, reaction surface area). We discuss a 'cause-effect' based decoupling strategy for the model and present our numerical discretization and solution scheme. We then identify the important model components and couplings which are most vital for a hydro-geomechanical hydrate simulator, namely, 1) dissociation kinetics, 2) hydrate phase change coupled with non-isothermal two phase two component flow, 3) two phase flow coupled with linear elasticity (poroelasticity coupling), and finally 4) hydrate phase change c...

  1. Multiscale Modeling of Multiphase Fluid Flow

    Science.gov (United States)

    2016-08-01

    of surface effects (surface energy, wettability and interfacial forces) and their modification via surface active reagents on boiling and two phase...enhancing the boiling heat transfer [35-38] and heat transfer with surfactant additives in pool boiling is the topic of active research in thermal management...Garcia-Ratés et al. [151] used MD simulations to study the diffusion coefficients, ionic conductivity, and rotational relaxation of CO2 in aqueous

  2. Treatment of non-ideality in the multiphase model SPACCIM - Part 1: Model development

    Science.gov (United States)

    Rusumdar, A. J.; Wolke, R.; Tilgner, A.; Herrmann, H.

    2015-06-01

    Ambient tropospheric deliquesced particles generally comprise a complex mixture of electrolytes, organic compounds, and water. Dynamic modeling of physical and chemical processes in this complex matrix is challenging. Thus, up-to-date multiphase chemistry models do generally not consider non-ideal solution effects. Therefore, the present study was aimed at the further development of the SPACCIM model to treat both complex multiphase chemistry and phase transfer processes considering newly non-ideality properties of concentrated aerosol solutions. The present paper describes firstly, the performed model development including (i) the kinetic implementation of the non-ideality in the SPACCIM framework, (ii) the advancements in the coupling scheme of microphysics and multiphase chemistry and (iii) the required adjustments of the numerical schemes, especially in the sparse linear solver and the calculation of the Jacobian. Secondly, results of performed sensitivity investigations are outlined aiming at the evaluation of different activity coefficient modules and the examination of the contributions of different intermolecular forces to the overall activity coefficients. Finally, first results obtained with the new model framework are presented. The main product of the performed model development is the new kinetic model approach SPACCIM-SpactMod, which utilizes activities in reaction terms instead of aqueous concentrations. Based on an intercomparison of different activity coefficient models and the comparison with experimental data, AIOMFAC was selected as base model and extended by additional interaction parameters from literature for mixed organic-inorganic systems. Moreover, the performance and the capability of the applied activity coefficient module were evaluated by means of water activity measurements, literature data and results of other thermodynamic equilibrium models. Comprehensive comparison studies showed that the SpactMod (SPACCIM activity coefficient

  3. Treatment of non-ideality in the multiphase model SPACCIM – Part 1: Model development

    Directory of Open Access Journals (Sweden)

    A. J. Rusumdar

    2015-06-01

    Full Text Available Ambient tropospheric deliquesced particles generally comprise a complex mixture of electrolytes, organic compounds, and water. Dynamic modeling of physical and chemical processes in this complex matrix is challenging. Thus, up-to-date multiphase chemistry models do generally not consider non-ideal solution effects. Therefore, the present study was aimed at the further development of the SPACCIM model to treat both complex multiphase chemistry and phase transfer processes considering newly non-ideality properties of concentrated aerosol solutions. The present paper describes firstly, the performed model development including (i the kinetic implementation of the non-ideality in the SPACCIM framework, (ii the advancements in the coupling scheme of microphysics and multiphase chemistry and (iii the required adjustments of the numerical schemes, especially in the sparse linear solver and the calculation of the Jacobian. Secondly, results of performed sensitivity investigations are outlined aiming at the evaluation of different activity coefficient modules and the examination of the contributions of different intermolecular forces to the overall activity coefficients. Finally, first results obtained with the new model framework are presented. The main product of the performed model development is the new kinetic model approach SPACCIM-SpactMod, which utilizes activities in reaction terms instead of aqueous concentrations. Based on an intercomparison of different activity coefficient models and the comparison with experimental data, AIOMFAC was selected as base model and extended by additional interaction parameters from literature for mixed organic–inorganic systems. Moreover, the performance and the capability of the applied activity coefficient module were evaluated by means of water activity measurements, literature data and results of other thermodynamic equilibrium models. Comprehensive comparison studies showed that the SpactMod (SPACCIM

  4. Noninvasive tomographic and velocimetric monitoring of multiphase flows

    Energy Technology Data Exchange (ETDEWEB)

    Chaouki, J. [Ecole Polytechnique de Montreal, Quebec (Canada). Dept. of Chemical Engineering; Larachi, F. [Laval Univ., Quebec (Canada); Dudukovic, M.P. [Washington Univ., St. Louis, MO (United States). Chemical Reaction Engineering Lab.

    1997-11-01

    A condensed review of recent advances accomplished in the development and the applications of noninvasive tomographic and velocimetric measurement techniques to multiphase flows and systems is presented. In recent years utilization of such noninvasive techniques has become widespread in many engineering disciplines that deal with systems involving two immiscible phases or more. Tomography provides concentration, holdup, or 2D or 3D density distribution of at least one component of the multiphase system, whereas velocimetry provides the dynamic features of the phase of interest such as the flow pattern, the velocity field, the 2D or 3D instantaneous movements, etc. The following review is divided into two parts. The first part summarizes progress and developments in flow imaging techniques using {gamma}-ray and X-ray transmission tomography; X-ray radiography; neutron transmission tomography and radiography; positron emission tomography; X-ray diffraction tomography; nuclear magnetic resonance imaging; electrical capacitance tomography; optical tomography; microwave tomography; and ultrasonic tomography. The second part of the review summarizes progress and developments in the following velocimetry techniques: positron emission particle tracking; radioactive particle tracking; cinematography; laser-Doppler anemometry; particle image velocimetry; and fluorescence particle image velocimetry. The basic principles of tomography and velocimetry techniques are outlined, along with advantages and limitations inherent to each technique. The hydrodynamic and structural information yielded by these techniques is illustrated through a literature survey on their successful applications to the study of multiphase systems in such fields as particulate solids processes, fluidization engineering, porous media, pipe flows, transport within packed beds and sparged reactors, etc.

  5. Multiphase modeling of geologic carbon sequestration in saline aquifers.

    Science.gov (United States)

    Bandilla, Karl W; Celia, Michael A; Birkholzer, Jens T; Cihan, Abdullah; Leister, Evan C

    2015-01-01

    Geologic carbon sequestration (GCS) is being considered as a climate change mitigation option in many future energy scenarios. Mathematical modeling is routinely used to predict subsurface CO2 and resident brine migration for the design of injection operations, to demonstrate the permanence of CO2 storage, and to show that other subsurface resources will not be degraded. Many processes impact the migration of CO2 and brine, including multiphase flow dynamics, geochemistry, and geomechanics, along with the spatial distribution of parameters such as porosity and permeability. In this article, we review a set of multiphase modeling approaches with different levels of conceptual complexity that have been used to model GCS. Model complexity ranges from coupled multiprocess models to simplified vertical equilibrium (VE) models and macroscopic invasion percolation models. The goal of this article is to give a framework of conceptual model complexity, and to show the types of modeling approaches that have been used to address specific GCS questions. Application of the modeling approaches is shown using five ongoing or proposed CO2 injection sites. For the selected sites, the majority of GCS models follow a simplified multiphase approach, especially for questions related to injection and local-scale heterogeneity. Coupled multiprocess models are only applied in one case where geomechanics have a strong impact on the flow. Owing to their computational efficiency, VE models tend to be applied at large scales. A macroscopic invasion percolation approach was used to predict the CO2 migration at one site to examine details of CO2 migration under the caprock.

  6. Multiphase simulation of mine waters and aqueous leaching processes

    Directory of Open Access Journals (Sweden)

    Pajarre Risto

    2016-01-01

    Full Text Available Managing of large amounts of water in mining and mineral processing sites remains a concern in both actively operated and closed mining areas. When the mining site with its metal or concentrate producing units is operational, the challenge is to find either ways for economical processing with maximum yields, while minimizing the environmental impact of the water usage and waste salt treatments. For safe closure of the site, the environmental control of possible drainage will be needed. For both challenges, the present-day multiphase process simulations tools can be used to provide improved accuracy and better economy in controlling the smooth and environmentally sound operation of the plant. One of the pioneering studies in using the multiphase thermodynamic software in simulation of hydrometallurgical processes was that of Koukkari et al. [1]. The study covered the use of Solgasmix equilibrium software for a number of practical acid digesters. The models were made for sulfuric acid treatments in titania pigment production and in NPK fertilizer manufacturing. During the past two decades the extensive data assessment has taken place particularly in geochemistry and a new versions of geochemical multiphase equilibrium software has been developed. On the other hand, there has been some progress in development of the process simulation software in all the aforementioned fields. Thus, the thermodynamic simulation has become a tool of great importance in development of hydrometallurgical processes. The presentation will cover three example cases of either true pilot or industrial systems including a South African acid mine water drainage treatment, hydrometallurgical extraction of rare earths from uranium leachate in Russia and a multistage process simulation of a Finnish heap leaching mine with its subsequent water treatment system.

  7. Slush Fund: Modeling the Multiphase Physics of Oceanic Ices

    Science.gov (United States)

    Buffo, J.; Schmidt, B. E.

    2016-12-01

    The prevalence of ice interacting with an ocean, both on Earth and throughout the solar system, and its crucial role as the mediator of exchange between the hydrosphere below and atmosphere above, have made quantifying the thermodynamic, chemical, and physical properties of the ice highly desirable. While direct observations of these quantities exist, their scarcity increases with the difficulty of obtainment; the basal surfaces of terrestrial ice shelves remain largely unexplored and the icy interiors of moons like Europa and Enceladus have never been directly observed. Our understanding of these entities thus relies on numerical simulation, and the efficacy of their incorporation into larger systems models is dependent on the accuracy of these initial simulations. One characteristic of seawater, likely shared by the oceans of icy moons, is that it is a solution. As such, when it is frozen a majority of the solute is rejected from the forming ice, concentrating in interstitial pockets and channels, producing a two-component reactive porous media known as a mushy layer. The multiphase nature of this layer affects the evolution and dynamics of the overlying ice mass. Additionally ice can form in the water column and accrete onto the basal surface of these ice masses via buoyancy driven sedimentation as frazil or platelet ice. Numerical models hoping to accurately represent ice-ocean interactions should include the multiphase behavior of these two phenomena. While models of sea ice have begun to incorporate multiphase physics into their capabilities, no models of ice shelves/shells explicitly account for the two-phase behavior of the ice-ocean interface. Here we present a 1D multiphase model of floating oceanic ice that includes parameterizations of both density driven advection within the `mushy layer' and buoyancy driven sedimentation. The model is validated against contemporary sea ice models and observational data. Environmental stresses such as supercooling and

  8. Applications of turbulent and multi-phase combustion

    CERN Document Server

    Kuo, Kenneth Kuan-yun

    2012-01-01

    A hands-on, integrated approach to solving combustion problems in diverse areas An understanding of turbulence, combustion, and multiphase reacting flows is essential for engineers and scientists in many industries, including power genera-tion, jet and rocket propulsion, pollution control, fire prevention and safety, and material processing. This book offers a highly practical discussion of burning behavior and chemical processes occurring in diverse materials, arming readers with the tools they need to solve the most complex combustion problems facing the scientific community today. The

  9. Texture and microstructure of the austenite in multiphased steel sheets

    Energy Technology Data Exchange (ETDEWEB)

    Regle, H. [ARCELOR Group, CMC-IRSID, Maizieres-les-Metz (France); Maruyama, N.; Yoshinaga, N. [Nippon Steel Corp. - Technical Development Bureau, Futtsu (Japan)

    2004-07-01

    In this paper we present results obtained in collaboration between NSC and Arcelor on the austenite of a multiphased steel and on a 70%Ni-30Fe alloy. The work concerns the formation of the crystallographic textures during the recrystallisation of austenite, since these textures have a strong influence, after the phase transformation, on the forming properties of the sheets. The microstructure and the textures of the austenite and the FeNi alloy were measured with X-Ray diffraction techniques and with EBSD on a high resolution FEG-SEM. (orig.)

  10. Modeling of Multiscale and Multiphase Phenomena in Materials Processing

    Science.gov (United States)

    Ludwig, Andreas; Kharicha, Abdellah; Wu, Menghuai

    2013-03-01

    In order to demonstrate how CFD can help scientists and engineers to better understand the fundamentals of engineering processes, a number of examples are shown and discussed. The paper covers (i) special aspects of continuous casting of steel including turbulence, motion and entrapment of non-metallic inclusions, and impact of soft reduction; (ii) multiple flow phenomena and multiscale aspects during casting of large ingots including flow-induced columnar-to-equiaxed transition and 3D formation of channel segregation; (iii) multiphase magneto-hydrodynamics during electro-slag remelting; and (iv) melt flow and solidification of thin but large centrifugal castings.

  11. The development of the Minnesota Multiphasic Personality Inventory.

    Science.gov (United States)

    Buchanan, R D

    1994-04-01

    The Minnesota Multiphasic Personality Inventory (MMPI) was constructed at the University of Minnesota before and during World War II. In its developmental phase, the MMPI was conceptualized as an efficient way of detecting psychiatric disturbance. The test's construction was made possible by atypical cooperation between psychologists and psychiatrists, within the context of a crisis in the U.S. public mental health care system. The MMPI was designed to meet the diagnostic needs of psychiatrists. As such, it represented the operationalization of medical hegemony. However, the interpretation of the MMPI shifted significantly after the war, reflecting organizational reform in clinical psychology and changing professional relationships between psychologists and psychiatrists.

  12. WD-XRA technique in multiphase flow measuring

    Energy Technology Data Exchange (ETDEWEB)

    Gogolev, A.S.; Cherepennikov, Yu.M.; Vukolov, A.V. [Tomsk Polytechnic University, Lenin Avenue 30, Tomsk 634050 (Russian Federation); Rezaev, R.O. [Tomsk Polytechnic University, Lenin Avenue 30, Tomsk 634050 (Russian Federation); Nuclear University MEPhI, Kashirskoye Shosse 31, Moscow 115409 (Russian Federation); Stuchebrov, S.G. [Tomsk Polytechnic University, Lenin Avenue 30, Tomsk 634050 (Russian Federation); Hampai, D. [INFN Laboratori Nazionali di Frascati, Via E. Fermi 40, 00044 Frascati (Italy); Dabagov, S.B. [INFN Laboratori Nazionali di Frascati, Via E. Fermi 40, 00044 Frascati (Italy); Nuclear University MEPhI, Kashirskoye Shosse 31, Moscow 115409 (Russian Federation); RAS P.N. Lebedev Physical Institute, Lenin Avenue 53, Moscow 119991 (Russian Federation); Liedl, A.; Polese, C. [INFN Laboratori Nazionali di Frascati, Via E. Fermi 40, 00044 Frascati (Italy)

    2015-07-15

    A new technique to perform the analysis of multiphase fluid flow based on wave dispersive X-ray absorptiometry is suggested. The numerical simulation and comparison of this technique with currently used approaches are provided and a way to increase the luminosity intensity is found that includes the usage the X-ray focusing optics by a bent crystal and a polycapillary semilens. Based on numerical simulation of radiation spectrum the influence of the bent crystal on the luminosity is evaluated and experimentally shown the advantages of using the multicapillary optics.

  13. WD-XRA technique in multiphase flow measuring

    Science.gov (United States)

    Gogolev, A. S.; Cherepennikov, Yu. M.; Vukolov, A. V.; Rezaev, R. O.; Stuchebrov, S. G.; Hampai, D.; Dabagov, S. B.; Liedl, A.; Polese, C.

    2015-07-01

    A new technique to perform the analysis of multiphase fluid flow based on wave dispersive X-ray absorptiometry is suggested. The numerical simulation and comparison of this technique with currently used approaches are provided and a way to increase the luminosity intensity is found that includes the usage the X-ray focusing optics by a bent crystal and a polycapillary semilens. Based on numerical simulation of radiation spectrum the influence of the bent crystal on the luminosity is evaluated and experimentally shown the advantages of using the multicapillary optics.

  14. Multiphase flow of immiscible fluids on unstructured moving meshes

    DEFF Research Database (Denmark)

    Misztal, Marek Krzysztof; Erleben, Kenny; Bargteil, Adam;

    2012-01-01

    In this paper, we present a method for animating multiphase flow of immiscible fluids using unstructured moving meshes. Our underlying discretization is an unstructured tetrahedral mesh, the deformable simplicial complex (DSC), that moves with the flow in a Lagrangian manner. Mesh optimization...... that the underlying discretization matches the physics and avoids the additional book-keeping required in grid-based methods where multiple fluids may occupy the same cell. Our Lagrangian approach naturally leads us to adopt a finite element approach to simulation, in contrast to the finite volume approaches adopted...

  15. MULTIPHASE BLASTING OF THE BRIDGE ACROSS THE DRENICA RIVER

    Directory of Open Access Journals (Sweden)

    Branko Božić

    1989-12-01

    Full Text Available The construction of new bridges on the sites of the existing ones require demolition of the old bridge. Due to closeness of newly erected bridge elements the fundations of old bridges are demolished by multiphase blasting process. The blasting of the piers and anchorages of the bridge across 'the Drenica river carrying the Balačevac—Goleš industrial railway was done in four phases. The piers and anchorages of a new bridge and its construction elements have been erected before (the paper is published in Croatian.

  16. A new multiphase equation of state for iron

    Energy Technology Data Exchange (ETDEWEB)

    Kerley, G.I.

    1993-07-01

    The PANDA code was used to develop an equation of state (EOS) for iron. Separate EOS tables were constructed for four solid phases and the fluid phase. The phase diagram and multiphase EOS table were then computed using the free energies. Results are in good agreement with thermophysical, static compression, phase boundary, and shock-wave measurements. Predicted pressures for the shock-induced {epsilon}-{gamma} and {gamma}-liquid transitions agree with those determined from sound speed measurements. Predicted melting temperatures fall in between two recent sets of experimental data which sharply disagree with one another.

  17. Nonlinear analysis and prediction of time series in multiphase reactors

    CERN Document Server

    Liu, Mingyan

    2014-01-01

    This book reports on important nonlinear aspects or deterministic chaos issues in the systems of multi-phase reactors. The reactors treated in the book include gas-liquid bubble columns, gas-liquid-solid fluidized beds and gas-liquid-solid magnetized fluidized beds. The authors take pressure fluctuations in the bubble columns  as time series for nonlinear analysis, modeling and forecasting. They present qualitative and quantitative non-linear analysis tools which include attractor phase plane plot, correlation dimension, Kolmogorov entropy and largest Lyapunov exponent calculations and local non-linear short-term prediction.

  18. Separation of Nanoparticles in Aqueous Multiphase Systems through Centrifugation

    KAUST Repository

    Akbulut, Ozge

    2012-08-08

    This paper demonstrates the use of aqueous multiphase systems (MuPSs) as media for rate-zonal centrifugation to separate nanoparticles of different shapes and sizes. The properties of MuPSs do not change with time or during centrifugation; this stability facilitates sample collection after separation. A three-phase system demonstrates the separation of the reaction products (nanorods, nanospheres, and large particles) of a synthesis of gold nanorods, and enriches the nanorods from 48 to 99% in less than ten minutes using a benchtop centrifuge. © 2012 American Chemical Society.

  19. Vertical flow of a multiphase mixture in a channel

    Directory of Open Access Journals (Sweden)

    Mehrdad Massoudi

    2001-01-01

    Full Text Available The flow of a multiphase mixture consisting of a viscous fluid and solid particles between two vertical plates is studied. The theory of interacting continua or mixture theory is used. Constitutive relations for the stress tensor of the granular materials and the interaction force are presented and discussed. The flow of interest is an ideal one where we assume the flow to be steady and fully developed; the mixture is flowing between two long vertical plates. The non-linear boundary value problem is solved numerically, and the results are presented for the dimensionless velocity profiles and the volume fraction as functions of various dimensionless numbers.

  20. Viscoelasticity of multiphase fluids: future directions

    Science.gov (United States)

    Tisato, Nicola; Spikes, Kyle; Javadpour, Farzam

    2016-04-01

    Recently, it has been demonstrated that rocks saturated with bubbly fluids attenuate seismic waves as the propagating elastic wave causes a thermodynamic disequilibrium between the liquid and the gas phases. The new attenuation mechanism, which is called wave-induced-gas-exsolution-dissolution (WIGED) and previously, was only postulated, opens up new perspectives for exploration geophysics as it could potentially improve the imaging of the subsurface. In particular, accounting for WIGED during seismic inversion could allow to better decipher seismic waves to disclose information about saturating phases. This will improve, for instance, the mapping of subsurface gas-plumes that might form during anthropogenic activities or natural phenomena such as those prior to volcanic eruptions. In the present contribution we will report the theory and the numerical method utilized to calculate the seismic-wave-attenuation related to WIGED and we will underline the assumptions and the limitations related to the theory. Then, we will present the experimental and the numerical strategy that we will employ to improve WIGED theory in order to incorporate additional effects, such as the role of interfacial tensions, or to extend it to fluid-fluid interaction

  1. Multiphase flow in lab on chip devices: A real tool for the future

    NARCIS (Netherlands)

    Shui, Lingling; Pennathur, S.; Pennathur, Sumita; Eijkel, Jan C.T.; van den Berg, Albert

    2008-01-01

    Many applications for lab on a chip (LOC) devices require the use of two or more fluids that are either not chemically related (e.g. oil and water) or in different phases (e.g. liquid and gas). Utilizing multiphase flow in LOC devices allows for both the fundamental study of multiphase flow and the

  2. Multiphase forces on bend structures – overview of large scale 6”experiments

    NARCIS (Netherlands)

    Belfroid, S.P.C.; Nennie, E.D.; Wijhe, A. van; Pereboom, H.P.; Lewis, M.

    2016-01-01

    Piping structures are generally subjected to high dynamic loading due to multiphase forces. In particular subsea structures are very vulnerable as large flexibility is required to cope for instance with thermal stresses. The forces due to multiphase flow are characterized by a broadband spectrum wit

  3. Measuring Bubble, Drop and Particle Sizes in Multiphase Systems with Ultrasound

    NARCIS (Netherlands)

    Cents, A.H.G.; Brilman, D.W.F.; Versteeg, G.F.; Wijnstra, P.J.; Regtien, P.P.L.

    2004-01-01

    A technique is developed for measurement of bubble, droplet and particle-size distributions in multiphase systems, based on the propagation speed and attenuation of ultrasound. The measurement of the size distribution of the dispersed phase in multiphase systems was desired to analyze the mass-trans

  4. Downhole multiphase metering in wells by means of soft-sensing

    NARCIS (Netherlands)

    Leskens, M.; Kruif, B. de; Belfroid, S.P.C.; Smeulers, J.P.M.; Gryzlov, A.

    2008-01-01

    Multiphase flow meters are indispensable tools for achieving optimal operation and control of wells as these meters deliver real-time information about their performance. For example, multiphase flow meters located downhole can improve the production of multilateral and multizone wells by timely all

  5. Multiphase flow in microfluidic systems - Control and applications of droplets and interfaces

    NARCIS (Netherlands)

    Shui, Lingling; Eijkel, Jan C.T.; Berg, van den Albert

    2007-01-01

    Micro- and nanotechnology can provide us with many tools for the production, study and detection of colloidal and interfacial systems. In multiphase flow in micro- and nanochannels several immiscible fluids will be separated from each other by flexible fluidic interfaces. The multiphase coexistence

  6. Multiphase forces on bend structures – overview of large scale 6”experiments

    NARCIS (Netherlands)

    Belfroid, S.P.C.; Nennie, E.D.; Wijhe, A. van; Pereboom, H.P.; Lewis, M.

    2016-01-01

    Piping structures are generally subjected to high dynamic loading due to multiphase forces. In particular subsea structures are very vulnerable as large flexibility is required to cope for instance with thermal stresses. The forces due to multiphase flow are characterized by a broadband spectrum wit

  7. Direct numerical simulation of incompressible multiphase flow with phase change

    Science.gov (United States)

    Lee, Moon Soo; Riaz, Amir; Aute, Vikrant

    2017-09-01

    Simulation of multiphase flow with phase change is challenging because of the potential for unphysical pressure oscillations, spurious velocity fields and mass flux errors across the interface. The resulting numerical errors may become critical when large density contrasts are present. To address these issues, we present a new approach for multiphase flow with phase change that features, (i) a smooth distribution of sharp velocity jumps and mass flux within a narrow region surrounding the interface, (ii) improved mass flux projection from the implicit interface onto the uniform Cartesian grid and (iii) post-advection velocity correction step to ensure accurate velocity divergence in interfacial cells. These new features are implemented in combination with a sharp treatment of the jumps in pressure and temperature gradient. A series of 1-D, 2-D, axisymmetric and 3-D problems are solved to verify the improvements afforded by the new approach. Axisymmetric film boiling results are also presented, which show good qualitative agreement with heat transfer correlations as well as experimental observations of bubble shapes.

  8. Direct Numerical Simulation of Multiphase Flows with Unstable Interfaces

    Science.gov (United States)

    Schillaci, Eugenio; Lehmkuhl, Oriol; Antepara, Oscar; Oliva, Assensi

    2016-09-01

    This paper presents a numerical model that intends to simulate efficiently the surface instability that arise in multiphase flows, typically liquid-gas, both for laminar or turbulent regimes. The model is developed on the in-house computing platform TermoFluids, and operates the finite-volume, direct numerical simulation (DNS) of multiphase flows by means of a conservative level-set method for the interface-capturing. The mesh size is optimized by means of an adaptive mesh refinement (AMR) strategy, that allows the dynamic re-concentration of the mesh in the vicinity of the interfaces between fluids, in order to correctly represent the diverse structures (as ligaments and droplets) that may rise from unstable phenomena. In addition, special attention is given to the discretization of the various terms of the momentum equations, to ensure stability of the flow and correct representation of turbulent vortices. As shown, the method is capable of truthfully simulate the interface phenomena as the Kelvin-Helmholtz instability and the Plateau-Rayleigh instability, both in the case of 2-D and 3-D configurations. Therefore it is suitable for the simulation of complex phenomena such as simulation of air-blast atomization, with several important application in the field of automotive and aerospace engines. A prove is given by our preliminary study of the 3-D coaxial liquid-gas jet.

  9. Radiation damage of hollandite in multiphase ceramic waste forms

    Science.gov (United States)

    Clark, Braeden M.; Tumurgoti, Priyatham; Sundaram, S. K.; Amoroso, Jake W.; Marra, James C.; Shutthanandan, Vaithiyalingam; Tang, Ming

    2017-10-01

    Radiation damage was simulated in multiphase titanate-based ceramic waste forms using an ion accelerator to generate high energy alpha particles (He+) and an ion implanter to generate 7 MeV gold (Au3+) particles. X-ray diffraction and transmission electron microscopy were used to characterize the damaged surfaces and nearby regions. Simulated multiphase ceramic waste forms were prepared using two processing methods: spark plasma sintering and melt-processing. Both processing methods produced ceramics with similar phase assemblages consisting of hollandite-, zirconolite/pyrochlore-, and perovskite-type phases. The measured heavy ion (Au3+) penetration depth was less in spark plasma sintered samples than in melt-processed samples. Structural breakdown of the hollandite phase occurred under He+ irradiation indicated by the presence of x-ray diffraction peaks belonging to TiO2, BaTiO5, and other hollandite related phases (Ba2Ti9O20). The composition of the constituent hollandite phase affected the extent of damage induced by Au3+ ions.

  10. Stability Analysis of Reactive Multiphase Slug Flows in Microchannels

    Directory of Open Access Journals (Sweden)

    Alejandro A. Munera Parra

    2014-05-01

    Full Text Available Conducting multiphase reactions in micro-reactors is a promising strategy for intensifying chemical and biochemical processes. A major unresolved challenge is to exploit the considerable benefits offered by micro-scale operation for industrial scale throughputs by numbering-up whilst retaining the underlying advantageous flow characteristics of the single channel system in multiple parallel channels. Fabrication and installation tolerances in the individual micro-channels result in different pressure losses and, thus, a fluid maldistribution. In this work, an additional source of maldistribution, namely the flow multiplicities, which can arise in a multiphase reactive or extractive flow in otherwise identical micro-channels, was investigated. A detailed experimental and theoretical analysis of the flow stability with and without reaction for both gas-liquid and liquid-liquid slug flow has been developed. The model has been validated using the extraction of acetic acid from n-heptane with the ionic liquid 1-Ethyl-3-methylimidazolium ethyl sulfate. The results clearly demonstrate that the coupling between flow structure, the extent of reaction/extraction and pressure drop can result in multiple operating states, thus, necessitating an active measurement and control concept to ensure uniform behavior and optimal performance.

  11. Elastic registration of multiphase CT images of liver

    Science.gov (United States)

    Heldmann, Stefan; Zidowitz, Stephan

    2009-02-01

    In this work we present a novel approach for elastic image registration of multi-phase contrast enhanced CT images of liver. A problem in registration of multiphase CT is that the images contain similar but complementary structures. In our application each image shows a different part of the vessel system, e.g., portal/hepatic venous/arterial, or biliary vessels. Portal, arterial and biliary vessels run in parallel and abut on each other forming the so called portal triad, while hepatic veins run independent. Naive registration will tend to align complementary vessel. Our new approach is based on minimizing a cost function consisting of a distance measure and a regularizer. For the distance we use the recently proposed normalized gradient field measure that focuses on the alignment of edges. For the regularizer we use the linear elastic potential. The key feature of our approach is an additional penalty term using segmentations of the different vessel systems in the images to avoid overlaps of complementary structures. We successfully demonstrate our new method by real data examples.

  12. Intrusive Method for Uncertainty Quantification in a Multiphase Flow Solver

    Science.gov (United States)

    Turnquist, Brian; Owkes, Mark

    2016-11-01

    Uncertainty quantification (UQ) is a necessary, interesting, and often neglected aspect of fluid flow simulations. To determine the significance of uncertain initial and boundary conditions, a multiphase flow solver is being created which extends a single phase, intrusive, polynomial chaos scheme into multiphase flows. Reliably estimating the impact of input uncertainty on design criteria can help identify and minimize unwanted variability in critical areas, and has the potential to help advance knowledge in atomizing jets, jet engines, pharmaceuticals, and food processing. Use of an intrusive polynomial chaos method has been shown to significantly reduce computational cost over non-intrusive collocation methods such as Monte-Carlo. This method requires transforming the model equations into a weak form through substitution of stochastic (random) variables. Ultimately, the model deploys a stochastic Navier Stokes equation, a stochastic conservative level set approach including reinitialization, as well as stochastic normals and curvature. By implementing these approaches together in one framework, basic problems may be investigated which shed light on model expansion, uncertainty theory, and fluid flow in general. NSF Grant Number 1511325.

  13. IMAGES ACQUISITION OF MULTIPHASE DISPERSIONS IN FERMENTATION PROCESSES

    Directory of Open Access Journals (Sweden)

    T. Brito

    2003-04-01

    Full Text Available Multiphase mixing is a common operation in fermentation process. However, one of the main problems for onlineautomatic monitoring of dispersions occurring in microbial cultures in a mechanically stirred bioreactor, isthe difficulty in acquiring images (in motion clear enough to characterize its elements (mainly air, water, oiland biomass and their interactions during cultivation. Once the images to be analyzed have been acquired,other problems arise related to the complexity and diversity of objects/artifacts captured in the visual field. Theheterogeneous transparency of some objects, low contrast and similarity between different classes of objectsare, among others, major problems for the automation of image analysis procedures. The purpose of thiswork is to present a system that allows the on-line acquisition of images inside a mechanically stirred tank.The images are digitally obtained by connecting a TV camera to a stereomicroscope. The scanning of thecamera is synchronized to the flashing of a stroboscope, which acts as the light source and is equipped with asubmergible probe. These illumination conditions allow obtaining high quality images that can be furtheranalyzed to quantify size distributions of air bubbles and oil drops in multiphase dispersion, and to observe thedynamics of phase interactions (solid, liquid and gaseous in a model culture.

  14. Shock initiated reactions of reactive multi-phase blast explosives

    Science.gov (United States)

    Wilson, Dennis; Granier, John; Johnson, Richard; Littrell, Donald

    2017-01-01

    This paper describes a new class of non-ideal explosive compositions made of perfluoropolyether (PFPE), nanoaluminum, and a micron-size, high mass density, reactive metal. Unlike high explosives, these compositions release energy via a fast self-oxidized combustion wave rather than a true self-sustaining detonation. Their reaction rates are shock dependent and they can be overdriven to change their energy release rate. These compositions are fuel rich and have an extended aerobic energy release phase. The term "reactive multiphase blast" refers to the post-dispersion blast behavior: multiphase in that there are a gas phase that imparts pressure and a solid (particulate) phase that imparts energy and momentum [1]; and reactive in that the hot metal particles react with atmospheric oxygen and the explosive gas products to give an extended pressure pulse. Tantalum-based RMBX formulations were tested in two spherical core-shell configurations - an RMBX shell exploded by a high explosive core, and an RMBX core imploded by a high explosive shell. The fireball and blast characteristics were compared to a C-4 baseline charge.

  15. Melt processed multiphase ceramic waste forms for nuclear waste immobilization

    Science.gov (United States)

    Amoroso, Jake; Marra, James C.; Tang, Ming; Lin, Ye; Chen, Fanglin; Su, Dong; Brinkman, Kyle S.

    2014-11-01

    Ceramic waste forms are promising hosts for nuclear waste immobilization as they have the potential for increased durability and waste loading compared with conventional borosilicate glass waste forms. Ceramics are generally processed using hot pressing, spark plasma sintering, and conventional solid-state reaction, however such methods can be prohibitively expensive or impractical at production scales. Recently, melt processing has been investigated as an alternative to solid-state sintering methods. Given that melter technology is currently in use for High Level Waste (HLW) vitrification in several countries, the technology readiness of melt processing appears to be advantageous over sintering methods. This work reports the development of candidate multi-phase ceramic compositions processed from a melt. Cr additions, developed to promote the formation and stability of a Cs containing hollandite phase were successfully incorporated into melt processed multi-phase ceramics. Control of the reduction-oxidation (Redox) conditions suppressed undesirable Cs-Mo containing phases, and additions of Al and Fe reduced the melting temperature.

  16. Technical Report on NETL's Non Newtonian Multiphase Slurry Workshop: A path forward to understanding non-Newtonian multiphase slurry flows

    Energy Technology Data Exchange (ETDEWEB)

    Edited by Guenther, Chris; Garg, Rahul

    2013-08-19

    The Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) sponsored a workshop on non-Newtonian multiphase slurry at NETL’s Morgantown campus August 19 and 20, 2013. The objective of this special two-day meeting of 20-30 invited experts from industry, National Labs and academia was to identify and address technical issues associated with handling non-Newtonian multiphase slurries across various facilities managed by DOE. Particular emphasis during this workshop was placed on applications managed by the Office of Environmental Management (EM). The workshop was preceded by two webinars wherein personnel from ORP and NETL provided background information on the Hanford WTP project and discussed the critical design challenges facing this project. In non-Newtonian fluids, viscosity is not constant and exhibits a complex dependence on applied shear stress or deformation. Many applications under EM’s tank farm mission involve non-Newtonian slurries that are multiphase in nature; tank farm storage and handling, slurry transport, and mixing all involve multiphase flow dynamics, which require an improved understanding of the mechanisms responsible for rheological changes in non-Newtonian multiphase slurries (NNMS). To discuss the issues in predicting the behavior of NNMS, the workshop focused on two topic areas: (1) State-of-the-art in non-Newtonian Multiphase Slurry Flow, and (2) Scaling up with Confidence and Ensuring Safe and Reliable Long-Term Operation.

  17. Development of Next Generation Multiphase Pipe Flow Prediction Tools

    Energy Technology Data Exchange (ETDEWEB)

    Tulsa Fluid Flow

    2008-08-31

    The developments of fields in deep waters (5000 ft and more) is a common occurrence. It is inevitable that production systems will operate under multiphase flow conditions (simultaneous flow of gas-oil-and water possibly along with sand, hydrates, and waxes). Multiphase flow prediction tools are essential for every phase of the hydrocarbon recovery from design to operation. The recovery from deep-waters poses special challenges and requires accurate multiphase flow predictive tools for several applications including the design and diagnostics of the production systems, separation of phases in horizontal wells, and multiphase separation (topside, seabed or bottom-hole). It is very crucial to any multiphase separation technique that is employed either at topside, seabed or bottom-hole to know inlet conditions such as the flow rates, flow patterns, and volume fractions of gas, oil and water coming into the separation devices. The overall objective was to develop a unified model for gas-oil-water three-phase flow in wells, flow lines, and pipelines to predict the flow characteristics such as flow patterns, phase distributions, and pressure gradient encountered during petroleum production at different flow conditions (pipe diameter and inclination, fluid properties and flow rates). The project was conducted in two periods. In Period 1 (four years), gas-oil-water flow in pipes were investigated to understand the fundamental physical mechanisms describing the interaction between the gas-oil-water phases under flowing conditions, and a unified model was developed utilizing a novel modeling approach. A gas-oil-water pipe flow database including field and laboratory data was formed in Period 2 (one year). The database was utilized in model performance demonstration. Period 1 primarily consisted of the development of a unified model and software to predict the gas-oil-water flow, and experimental studies of the gas-oil-water project, including flow behavior description and

  18. Progress in the Development of Compressible, Multiphase Flow Modeling Capability for Nuclear Reactor Flow Applications

    Energy Technology Data Exchange (ETDEWEB)

    R. A. Berry; R. Saurel; F. Petitpas; E. Daniel; O. Le Metayer; S. Gavrilyuk; N. Dovetta

    2008-10-01

    In nuclear reactor safety and optimization there are key issues that rely on in-depth understanding of basic two-phase flow phenomena with heat and mass transfer. Within the context of multiphase flows, two bubble-dynamic phenomena – boiling (heterogeneous) and flashing or cavitation (homogeneous boiling), with bubble collapse, are technologically very important to nuclear reactor systems. The main difference between boiling and flashing is that bubble growth (and collapse) in boiling is inhibited by limitations on the heat transfer at the interface, whereas bubble growth (and collapse) in flashing is limited primarily by inertial effects in the surrounding liquid. The flashing process tends to be far more explosive (and implosive), and is more violent and damaging (at least in the near term) than the bubble dynamics of boiling. However, other problematic phenomena, such as crud deposition, appear to be intimately connecting with the boiling process. In reality, these two processes share many details.

  19. Numerical Simulation of Shaped Charge Jet Using Multi-Phase SPH Method

    Institute of Scientific and Technical Information of China (English)

    QIANG Hongfu; WANG Kunpeng; GAO Weiran

    2008-01-01

    Since the jets and detonation gaseous products are separated by sharp interfaces,the traditional smoothed particle hydrodynamics (SPH) method is difficult to avoid the computational instability at interfaces.The multi-phase SPH (MSPH) method was applied to improving the stability,which smoothes the particle density and makes pressure continuous at interfaces.Numerical examples of jet forming process were used to test capability of the MSPH method.The results show that the method remains algorithm stability for large density gradient between the jets and gaseous products and has potential application to both the explosion and the jet problems.The effect of initiation ways of the shaped charge was discussed as well.

  20. Particle methods for simulation of subsurface multiphase fluid flow and biogeological processes

    Energy Technology Data Exchange (ETDEWEB)

    Meakin, Paul; Tartakovsky, Alexandre M.; Scheibe, Timothy D.; Tartakovsky, Daniel M.; Redden, George; Long, Philip E.; Brooks, Scott C.; Xu, Zhijie

    2007-08-01

    A number of particle models that are suitable for simulating multiphase fluid flow and biogeological processes have been developed during the last few decades. Here we discuss three of them: a microscopic model - molecular dynamics; a mesoscopic model - dissipative particle dynamics; and a macroscopic model - smoothed particle hydrodynamics. Particle methods are robust and versatile, and it is relatively easy to add additional physical, chemical and biological processes into particle codes. However, the computational efficiency of particle methods is low relative to continuum methods. Multiscale particle methods and hybrid (particle–particle and particle–continuum) methods are needed to improve computational efficiency and make effective use of emerging computational capabilities. These new methods are under development.

  1. Investigation of Multiscale and Multiphase Flow, Transport and Reaction in Heavy Oil Recovery Processes

    Energy Technology Data Exchange (ETDEWEB)

    Yortsos, Yanis C.

    2001-08-07

    This project is an investigation of various multi-phase and multiscale transport and reaction processes associated with heavy oil recovery. The thrust areas of the project include the following: Internal drives, vapor-liquid flows, combustion and reaction processes, fluid displacements and the effect of instabilities and heterogeneities and the flow of fluids with yield stress. These find respective applications in foamy oils, the evolution of dissolved gas, internal steam drives, the mechanics of concurrent and countercurrent vapor-liquid flows, associated with thermal methods and steam injection, such as SAGD, the in-situ combustion, the upscaling of displacements in heterogeneous media and the flow of foams, Bingham plastics and heavy oils in porous media and the development of wormholes during cold production.

  2. Lattice Boltzmann Simulations for High Density Ratio Flows of Multiphase Fluids

    Science.gov (United States)

    Wei, Yikun; Qian, Yuehong

    2010-11-01

    In the present communication, we will show that the compression effect of the Redlich-Kwong equation of state(EOS) is lower than that of the van der Waals (vdW) EOS. The Redlich-Kwong equation of state has a better agreement with experimental data for the coexistence curve than the van derWaals (vdW) EOS. We implement the Redlich-Kwong EOS in the lattice Boltzmann simulations via a pseudo-potential. As a result, multi-phase flows with large density ratios may be simulated, thus many real applications in engineering problems can be applied. Acknowledgement: This research is supported in part by Ministry of Education in China via project IRT0844 and NSFC project 10625210 and Shanghai Sci and Tech. Com. Project 08ZZ43

  3. Gas Properties and Implications for Galactic Star Formation in Numerical Models of the Turbulent, Multiphase ISM

    CERN Document Server

    Koyama, H

    2008-01-01

    Using numerical simulations of galactic disks resolving scales from ~1 to several hundred pc, we investigate dynamical properties of the multiphase ISM with turbulence driven by star formation feedback. We focus on HII region effects by applying intense heating in dense, self-gravitating regions. Our models are two-dimensional radial-vertical slices through the disk, and include sheared background rotation, vertical stratification, heating and cooling to yield temperatures T~10-10^4K, and thermal conduction. We separately vary the gas surface density Sigma, the stellar volume density rho_*, and the local angular rotation rate Omega to explore environmental dependencies, and analyze the steady-state properties of each model. Among other statistics, we evaluate turbulent amplitudes, virial ratios, Toomre Q parameters including turbulence, and the mass fractions at different densities. We find that the dense gas (n>100 cm^-3) has turbulence levels similar to observed GMCs and virial ratios ~1-2. The Toomre Q par...

  4. Particle methods for simulation of subsurface multiphase fluid flow and biogeological processes

    Energy Technology Data Exchange (ETDEWEB)

    Paul Meakin; Alexandre Tartakovsky; Tim Scheibe; Daniel Tartakovsky; Georgr Redden; Philip E. Long; Scott C. Brooks; Zhijie Xu

    2007-06-01

    A number of particle models that are suitable for simulating multiphase fluid flow and biogeological processes have been developed during the last few decades. Here we discuss three of them: a microscopic model - molecular dynamics; a mesoscopic model - dissipative particle dynamics; and a macroscopic model - smoothed particle hydrodynamics. Particle methods are robust and versatile, and it is relatively easy to add additional physical, chemical and biological processes into particle codes. However, the computational efficiency of particle methods is low relative to continuum methods. Multiscale particle methods and hybrid (particle–particle and particle–continuum) methods are needed to improve computational efficiency and make effective use of emerging computational capabilities. These new methods are under development.

  5. Investigation of Multiscale and Multiphase Flow, Transport and Reaction in Heavy Oil Recovery Processes

    Energy Technology Data Exchange (ETDEWEB)

    Yortsos, Y.C.

    2001-05-29

    This report is an investigation of various multi-phase and multiscale transport and reaction processes associated with heavy oil recovery. The thrust areas of the project include the following: Internal drives, vapor-liquid flows, combustion and reaction processes, fluid displacements and the effect of instabilities and heterogeneities and the flow of fluids with yield stress. These find respective applications in foamy oils, the evolution of dissolved gas, internal steam drives, the mechanics of concurrent and countercurrent vapor-liquid flows, associated with thermal methods and steam injection, such as SAGD, the in-situ combustion, the upscaling of displacements in heterogeneous media and the flow of foams, Bingham plastics and heavy oils in porous media and the development of wormholes during cold production.

  6. A thermodynamical formulation for chemically active multi-phase turbulent flows

    Energy Technology Data Exchange (ETDEWEB)

    Ahmadi, G.; Cao, J.

    1995-03-01

    A generalized thermodynamics for chemically active multiphase solid-fluid mixtures in turbulent state of motion is formulated. The global equations of balance for each phase are ensemble averaged and the local conservation laws for the mean motions are derived. The averaged and the local conservation laws for the mean motions are derived. The averaged form of the Clausius-Duhem inequality is used and the thermodynamics of the chemically active mixtures in turbulent motion is studied. Particular attention is given to the species concentration and chemical reaction effects, in addition to transport and interaction of the phasic fluctuation energies. Based on the averaged entropy inequality, constitutive equations for the stresses, energy, heat and mass fluxes of various species are developed. The explicit governing equations of motion are derived and discussed.

  7. Additional interfacial force in lattice Boltzmann models for incompressible multiphase flows

    CERN Document Server

    Li, Q; Gao, Y J

    2011-01-01

    The existing lattice Boltzmann models for incompressible multiphase flows are mostly constructed with two distribution functions, one is the order parameter distribution function, which is used to track the interface between different phases, and the other is the pressure distribution function for solving the velocity field. In this brief report, it is shown that in these models the recovered momentum equation is inconsistent with the target one: an additional interfacial force is included in the recovered momentum equation. The effects of the additional force are investigated by numerical simulations of droplet splashing on a thin liquid film and falling droplet under gravity. In the former test, it is found that the formation and evolution of secondary droplets are greatly affected, while in the latter the additional force is found to increase the falling velocity and limit the stretch of the droplet.

  8. Density and Cavitating Flow Results from a Full-Scale Optical Multiphase Cryogenic Flowmeter

    Science.gov (United States)

    Korman, Valentin

    2007-01-01

    Liquid propulsion systems are hampered by poor flow measurements. The measurement of flow directly impacts safe motor operations, performance parameters as well as providing feedback from ground testing and developmental work. NASA Marshall Space Flight Center, in an effort to improve propulsion sensor technology, has developed an all optical flow meter that directly measures the density of the fluid. The full-scale sensor was tested in a transient, multiphase liquid nitrogen fluid environment. Comparison with traditional density models shows excellent agreement with fluid density with an error of approximately 0.8%. Further evaluation shows the sensor is able to detect cavitation or bubbles in the flow stream and separate out their resulting effects in fluid density.

  9. A semi-implicit, second-order-accurate numerical model for multiphase underexpanded volcanic jets

    Directory of Open Access Journals (Sweden)

    S. Carcano

    2013-11-01

    Full Text Available An improved version of the PDAC (Pyroclastic Dispersal Analysis Code, Esposti Ongaro et al., 2007 numerical model for the simulation of multiphase volcanic flows is presented and validated for the simulation of multiphase volcanic jets in supersonic regimes. The present version of PDAC includes second-order time- and space discretizations and fully multidimensional advection discretizations in order to reduce numerical diffusion and enhance the accuracy of the original model. The model is tested on the problem of jet decompression in both two and three dimensions. For homogeneous jets, numerical results are consistent with experimental results at the laboratory scale (Lewis and Carlson, 1964. For nonequilibrium gas–particle jets, we consider monodisperse and bidisperse mixtures, and we quantify nonequilibrium effects in terms of the ratio between the particle relaxation time and a characteristic jet timescale. For coarse particles and low particle load, numerical simulations well reproduce laboratory experiments and numerical simulations carried out with an Eulerian–Lagrangian model (Sommerfeld, 1993. At the volcanic scale, we consider steady-state conditions associated with the development of Vulcanian and sub-Plinian eruptions. For the finest particles produced in these regimes, we demonstrate that the solid phase is in mechanical and thermal equilibrium with the gas phase and that the jet decompression structure is well described by a pseudogas model (Ogden et al., 2008. Coarse particles, on the other hand, display significant nonequilibrium effects, which associated with their larger relaxation time. Deviations from the equilibrium regime, with maximum velocity and temperature differences on the order of 150 m s−1 and 80 K across shock waves, occur especially during the rapid acceleration phases, and are able to modify substantially the jet dynamics with respect to the homogeneous case.

  10. Numerical simulation of multi-phase combustion flow in solid rocket motors with metalized propellant%Nmerical simulation of multi-phase combustion flow in solid rocket motors with metalized propellant

    Institute of Scientific and Technical Information of China (English)

    SHAFQAT Wahab; XIE Kan; LIU Yu

    2009-01-01

    Multi-phase flow field simulation has been performed on solid rocket motor and effect of multi-phases on the performance prediction of the solid rocket motor(SRM)is in- vestigation.During the combustion of aluminized propellant,the aluminum particles in the propellant melt and form liquid aluminum at the burning propellant surface.So the flow within the rocket motor is multi phase or two phase because it contains droplets and smoke particles of Al2O3.Flow simulations have been performed on a large scale motor,to observe the effect of the flowfield on the chamber and nozzle as well.Uniform particles diameters and Rosin-Rammler diameter distribution method that is based on the assumption that an expo- nential relationship exists between the droplet diameter,d and mass fraction of droplets with diameter greater than d have been used for the simulation of different distribution of Al2O3 droplets present in SRM.Particles sizes in the range of 1-1 00μm are used,as being the most common droplets.In this approach the complete range of particle sizes is divided into a set of discrete size ranges,each to be defined by single stream that is part of the group.Roe scheme-flux differencing splitting based on approximate Riemann problem has been used to simulate the effects of the multi-phase flowfeild.This is second order upwind scheme in which flux differencing splitting method is employed.To cater for the turbulence effect, Spalart-Allmaras model has been used.The results obtained show the great sensitivity of this diameters distribution and particles concentrations to the SRM flow dynamics,primarily at the motor chamber and nozzle exit.The results are shown with various sizes of the parti- cles concentrations and geometrical configurations including models for SRM and nozzle.The analysis also provides effect of multi-phase on performance prediction of solid rocket motor.

  11. On the Grand Challenges in Physical Petrology: the Multiphase Crossroads

    Science.gov (United States)

    Bergantz, G. W.

    2014-12-01

    Rapid progress in experimental, micro-analytical and textural analysis at the crystal scale has produced an unprecedented record of magmatic processes. However an obstacle to further progress is the lack of understanding of how mass, energy and momentum flux associated with crystal-rich, open-system events produces identifiable outcomes. Hence developing a physically-based understanding of magmatic systems linking micro-scale petrological observations with a physical template operating at the macro-scale presents a so-called "Grand Challenge." The essence of this challenge is that magmatic systems have characteristic length and feedback scales between those accessible by classical continuum and discrete methods. It has become increasingly obvious that the old-school continuum methods have limited resolution and power of explanation for multiphase (real) magma dynamics. This is, in part, because in crystal-rich systems the deformation is non-affine, and so the concept of constitutive behavior is less applicable and likely not even relevant, especially if one is interested in the emergent character of micro-scale processes. One expression of this is the cottage industry of proposing viscosity laws for magmas, which serves as "blunt force" de facto corrections for what is intrinsically multiphase behavior. Even in more fluid-rich systems many of these laws are not suitable for use in the very transport theories they aim to support. The alternative approach is the discrete method, where multiphase interactions are explicitly resolved. This is a daunting prospect given the numbers of crystals in magmas. But perhaps all crystals don't need to be modeled. I will demonstrate how discrete methods can recover critical state behavior, resolve crystal migration, the onset of visco-elastic behavior such as melt-present shear bands which sets the large-scale mixing volumes, some of the general morpho-dynamics that underlies purported rheological models, and transient controls on

  12. Application of partially-coupled hydro-mechanical schemes to multiphase flow problems

    Science.gov (United States)

    Tillner, Elena; Kempka, Thomas

    2016-04-01

    Utilization of subsurface reservoirs by fluid storage or production generally triggers pore pressure changes and volumetric strains in reservoirs and cap rocks. The assessment of hydro-mechanical effects can be undertaken using different process coupling strategies. The fully-coupled geomechanics and flow simulation, constituting a monolithic system of equations, is rarely applied for simulations involving multiphase fluid flow due to the high computational efforts required. Pseudo-coupled simulations are driven by static tabular data on porosity and permeability changes as function of pore pressure or mean stress, resulting in a rather limited flexibility when encountering complex subsurface utilization schedules and realistic geological settings. Partially-coupled hydro-mechanical simulations can be distinguished into one-way and iterative two-way coupled schemes, whereby the latter one is based on calculations of flow and geomechanics, taking into account the iterative exchange of coupling parameters between the two respective numerical simulators until convergence is achieved. In contrast, the one-way coupling scheme is determined by the provision of pore pressure changes calculated by the flow simulator to the geomechanical simulator neglecting any feedback. In the present study, partially-coupled two-way schemes are discussed in view of fully-coupled single-phase flow and geomechanics, and their applicability to multiphase flow simulations. For that purpose, we introduce a comparison study between the different coupling schemes, using selected benchmarks to identify the main requirements for the partially-coupled approach to converge with the numerical solution of the fully-coupled one.

  13. Development of Multi-physics (Multiphase CFD + MCNP) simulation for generic solution vessel power calculation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Jun [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Buechler, Cynthia Eileen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-17

    The current study aims to predict the steady state power of a generic solution vessel and to develop a corresponding heat transfer coefficient correlation for a Moly99 production facility by conducting a fully coupled multi-physics simulation. A prediction of steady state power for the current application is inherently interconnected between thermal hydraulic characteristics (i.e. Multiphase computational fluid dynamics solved by ANSYS-Fluent 17.2) and the corresponding neutronic behavior (i.e. particle transport solved by MCNP6.2) in the solution vessel. Thus, the development of a coupling methodology is vital to understand the system behavior at a variety of system design and postulated operating scenarios. In this study, we report on the k-effective (keff) calculation for the baseline solution vessel configuration with a selected solution concentration using MCNP K-code modeling. The associated correlation of thermal properties (e.g. density, viscosity, thermal conductivity, specific heat) at the selected solution concentration are developed based on existing experimental measurements in the open literature. The numerical coupling methodology between multiphase CFD and MCNP is successfully demonstrated, and the detailed coupling procedure is documented. In addition, improved coupling methods capturing realistic physics in the solution vessel thermal-neutronic dynamics are proposed and tested further (i.e. dynamic height adjustment, mull-cell approach). As a key outcome of the current study, a multi-physics coupling methodology between MCFD and MCNP is demonstrated and tested for four different operating conditions. Those different operating conditions are determined based on the neutron source strength at a fixed geometry condition. The steady state powers for the generic solution vessel at various operating conditions are reported, and a generalized correlation of the heat transfer coefficient for the current application is discussed. The assessment of multi

  14. Extreme biomimetic approach for synthesis of nanocrystalline chitin-(Ti,Zr)O{sub 2} multiphase composites

    Energy Technology Data Exchange (ETDEWEB)

    Wysokowski, Marcin, E-mail: Marcin.Wysokowski@put.poznan.pl [Poznan University of Technology, Faculty of Chemical Technology, Institute of Chemical Technology and Engineering, Berdychowo 4, 60965, Poznan (Poland); Motylenko, Mykhaylo; Rafaja, David [TU Bergakademie Freiberg, Institute of Materials Science, Gustav-Zeuner-Str. 5, 09596, Freiberg (Germany); Koltsov, Iwona [Laboratory of Nanostructures, Institute of High Pressure Physics of The Polish Academy of Sciences, Sokołowska 29/37, 01-142, Warsaw (Poland); Stöcker, Hartmut [TU Bergakademie Freiberg, Institute of Experimental Physics, Leipziger str. 23, 09596, Freiberg (Germany); Szalaty, Tadeusz J. [Poznan University of Technology, Faculty of Chemical Technology, Institute of Chemical Technology and Engineering, Berdychowo 4, 60965, Poznan (Poland); Bazhenov, Vasilii V., E-mail: vasily.bazhenov@gmail.com [TU Bergakademie Freiberg, Institute of Experimental Physics, Leipziger str. 23, 09596, Freiberg (Germany); Stelling, Allison L. [Duke University, Department of Biochemistry, Durham, NC, 27708 (United States); Beyer, Jan; Heitmann, Johannes [TU Bergakademie Freiberg, Institute of Applied Physics, Leipziger str. 23, 09596, Freiberg (Germany); Jesionowski, Teofil [Poznan University of Technology, Faculty of Chemical Technology, Institute of Chemical Technology and Engineering, Berdychowo 4, 60965, Poznan (Poland); Petovic, Slavica; Đurović, Mirko [Institute of Marine Biology, Dobrota, 85330, Kotor (Montenegro); Ehrlich, Hermann [TU Bergakademie Freiberg, Institute of Experimental Physics, Leipziger str. 23, 09596, Freiberg (Germany)

    2017-02-15

    This work presents an extreme biomimetics route for the modification of the surface of fibre-based scaffolds of poriferan origin by the creation of novel nanostructured multiphase biocomposites. The exceptional thermal stability of the nanostructured sponge chitin allowed for the formation of a novel nanocrystalline chitin-(Ti,Zr)O{sub 2} composite with a well-defined nanoscale structure under hydrothermal conditions (160 °C). Using a combination of experimental techniques, including X-ray diffraction, scanning electron microscopy, high resolution transmission electron microscopy, EDX mapping and near-edge electron loss spectroscopy (ELNES) in TEM and thermogravimetry/differential scanning calorimetry coupled with mass spectrometry; we showed that this bioorganic scaffold facilitates selective crystallization of TiO{sub 2}, predominantly in form of anatase, over the monoclinic zirconium dioxide (baddeleyite). The control of the crystal morphology through the chitin templates is also demonstrated. Obtained samples were characterized in terms of their photoluminescent properties and photocatalytic performance. These data confirm the high potential of the extreme biomimetics approach for developing a new generation of multiphase biopolymer-based nanostructured materials. - Highlights: • Extreme biomimetically prepared chitin-(Ti,Zr)O{sub 2} and (Ti,Zr)O{sub 2} composites. • Chitin-(Ti,Zr)O{sub 2} composite contains anatase as the most inorganic component. • The mean crystallite size is (31.7 ± 0.3) nm for chitin-(Ti,Zr)O{sub 2} composite. • The mean crystallite size is (2.4 ± 0.5) nm for (Ti,Zr)O{sub 2} composite. • (Ti,Zr)O{sub 2} composite is 2 times more effective photocatalyst than chitin-(Ti,Zr)O{sub 2}.

  15. Flow and Diffusion Equations for Fluid Flow in Porous Rocks for the Multiphase Flow Phenomena

    Directory of Open Access Journals (Sweden)

    Mohammad Miyan

    2015-07-01

    Full Text Available The multiphase flow in porous media is a subject of great complexities with a long rich history in the field of fluid mechanics. This is a subject with important technical applications, most notably in oil recovery from petroleum reservoirs and so on. The single-phase fluid flow through a porous medium is well characterized by Darcy’s law. In the petroleum industry and in other technical applications, transport is modeled by postulating a multiphase generalization of the Darcy’s law. In this connection, distinct pressures are defined for each constituent phase with the difference known as capillary pressure, determined by the interfacial tension, micro pore geometry and surface chemistry of the solid medium. For flow rates, relative permeability is defined that relates the volume flow rate of each fluid to its pressure gradient. In the present paper, there is a derivation and analysis about the diffusion equation for the fluid flow in porous rocks and some important results have been founded. The permeability is a function of rock type that varies with stress, temperature etc., and does not depend on the fluid. The effect of the fluid on the flow rate is accounted for by the term of viscosity. The numerical value of permeability for a given rock depends on the size of the pores in the rock as well as on the degree of interconnectivity of the void space. The pressure pulses obey the diffusion equation not the wave equation. Then they travel at a speed which continually decreases with time rather than travelling at a constant speed. The results shown in this paper are much useful in earth sciences and petroleum industry.

  16. The Effects of Different Qigong Practice on Minnesota Multiphasic Personality Inventory (MMPI)of Patitents with Type 2 Diabetes%不同养生功法对2型糖尿病患者MMPI的影响

    Institute of Scientific and Technical Information of China (English)

    林颖娜; 铃木晶夫; 汪卫东; 张容瑞; 王芳; 赵阳; 石井康智; 辻内琢也; 越川房子; 岸太一; 春木丰

    2008-01-01

    Qigong group was 94,the movement combined with state Qigong group was 24,the state Qigong group was 25,and the controlled group was 22.All the statistics were analyzed by software SPSS12.0.Results Comparison among groups:After four months of Qigong practice,The Si factor in MMPl was obvious better in State group than in the controlled group(P=0.029),There was no obvious change in other factors.After four months of Qigong practice,the total mark,average mark,Pd、Ptand Sc factor of the movement combined with state group showed obvious improvement(P=0.010,P=0.020,P =0.017).The total mark,average mark,Hy、Pd and Pa factor of the state Qigong group showed obvious improvement(P=0.026、P=0.033、P=0.035).Conclusion Different types of Qigong practice have different effects.Movement combined with state Qigong and state Qigong exercise have good effects in improving emotion disorders of type 2diabetes patients.

  17. Treatment of non-ideality in the SPACCIM multiphase model - Part 1: Model development

    Science.gov (United States)

    Rusumdar, A. J.; Wolke, R.; Tilgner, A.; Herrmann, H.

    2016-01-01

    Ambient tropospheric deliquesced particles generally comprise a complex mixture of electrolytes, organic compounds, and water. Dynamic modeling of physical and chemical processes in this complex matrix is challenging. Thus, up-to-date multiphase chemistry models generally do not consider non-ideal solution effects. Therefore, the present study was aimed at presenting further development of the SPACCIM (Spectral Aerosol Cloud Chemistry Interaction Model) through treatment of solution non-ideality, which has not been considered before. The present paper firstly describes the model developments including (i) the implementation of solution non-ideality in aqueous-phase reaction kinetics in the SPACCIM framework, (ii) the advancements in the coupling scheme of microphysics and multiphase chemistry and (iii) the required adjustments of the numerical schemes, especially in the sparse linear solver and the calculation of the Jacobian. Secondly, results of sensitivity investigations are outlined, aiming at the evaluation of different activity coefficient modules and the examination of the contributions of different intermolecular forces to the overall activity coefficients. Finally, first results obtained with the new model framework are presented. The SPACCIM parcel model was developed and, so far, applied for the description of aerosol-cloud interactions. To advance SPACCIM also for modeling physical and chemical processes in deliquesced particles, the solution non-ideality has to be taken into account by utilizing activities in reaction terms instead of aqueous concentrations. The main goal of the extended approach was to provide appropriate activity coefficients for solved species. Therefore, an activity coefficient module was incorporated into the kinetic model framework of SPACCIM. Based on an intercomparison of different activity coefficient models and the comparison with experimental data, the AIOMFAC approach was implemented and extended by additional interaction

  18. Multiphase flow modelling of explosive volcanic eruptions using adaptive unstructured meshes

    Science.gov (United States)

    Jacobs, Christian T.; Collins, Gareth S.; Piggott, Matthew D.; Kramer, Stephan C.

    2014-05-01

    from the sudden high-velocity inflow of gas and ash; the formation of a particle-laden plume rising several hundred metres into the atmosphere; the eventual collapse of the plume which generates a volcanic ash fountain and a fast ground-hugging pyroclastic density current; and the growth of a dilute convective region that rises above the ash fountain as a result of buoyancy effects. The results from Fluidity are also compared with results from MFIX, a fixed structured mesh-based multiphase flow code, that uses the same set-up. The key flow features are also captured in MFIX, providing at least some confidence in the plausibility of the numerical results in the absence of quantitative field data. Finally, it is shown by a convergence analysis that Fluidity offers the same solution accuracy for reduced computational cost using an adaptive mesh, compared to the same simulation performed with a uniform fixed mesh.

  19. The impact of interfacial tension on multiphase flow in the CO2-brine-sandstone system

    Science.gov (United States)

    Reynolds, C. A.; Blunt, M. J.; Krevor, S. C.

    2013-12-01

    experimental results than is usually associated with measurements of these properties. We will report the results and implications for multiphase flow of a programme of steady-state relative permeability core flood experiments observing drainage, imbibition and residual trapping at interfacial tensions of 28 to 49 mN m-1, at the pressure, temperature and salinity conditions relevant to the storage of supercritical CO2 (8-25 MPa, 35-100°C and 0-5 mol kg-1). Amaefule, J., & Handy, L. (1982). The effect of interfacial tensions on relative oil/water permeabilities of consolidated porous media. Old SPE Journal, 22(3), 371-381. Bardon, C., & Longeron, D. G. (1980). Influence of very low interfacial tensions on relative permeability. Old SPE Journal, 20(5), 391-401. Juanes, R., Spiteri, E. J., Orr, F. M., & Blunt, M. J. (2006). Impact of relative permeability hysteresis on geological CO2 storage. Water Resources Research, 42(12).

  20. Equations and simulations for multiphase compressible gas-dust flows

    Science.gov (United States)

    Oran, Elaine; Houim, Ryan

    2014-11-01

    Dust-gas multiphase flows are important in physical scenarios such as dust explosions in coal mines, asteroid impact disturbing lunar regolith, and soft aircraft landings dispersing desert or beach sand. In these cases, the gas flow regime can range from highly subsonic and nearly incompressible to supersonic and shock-laden flow, the grain packing can range from fully packed to completely dispersed, and both the gas and the dust can range from chemically inert to highly exothermic. To cover the necessary parameter range in a single model, we solve coupled sets of Navier-Stokes equations describing the background gas and the dust. As an example, a reactive-dust explosion that results in a type of shock-flame complex is described and discussed. Sponsored by the University of Maryland through Minta Martin Endowment Funds in the Department of Aerospace Engineering, and through the Glenn L. Martin Institute Chaired Professorship at the A. James Clark School of Engineering.

  1. Segmented motor drive - with multi-phase induction motor

    DEFF Research Database (Denmark)

    Bendixen, Flemming Buus

    of the induction motor is set up. The model is able to calculate dynamical electric, magnetic and mechanic state variables, but initially it is used to calculate static characteristics in motors with different number of phases and different voltage supply shapes. This analysis show i.e. that the efficiency...... dimensions. The possible torque increase proves to be strongly dependent on the physical dimensions in the initial three-phase motor. The torque increase according to the optimization is listed for a range of Grundfos motors, but in most cases the increase is only a few percent. In a single example...... with 3rd harmonic or square. Another tendency is that the torque ripple is decreased as the number of phases is increased, regardless of the supply type used. Torque ripple can be a source of acoustic noise generation, in this context a multi-phase motor can therefore be an advantage. According...

  2. Multiphase turbulent interstellar medium: some recent results from radio astronomy

    CERN Document Server

    Roy, Nirupam

    2015-01-01

    The radio frequency 1.4 GHz transition of the atomic hydrogen is one of the important tracers of the diffuse neutral interstellar medium. Radio astronomical observations of this transition, using either a single dish telescope or an array interferometer, reveal different properties of the interstellar medium. Such observations are particularly useful to study the multiphase nature and turbulence in the interstellar gas. Observations with multiple radio telescopes have recently been used to study these two closely related aspects in greater detail. Using various observational techniques, the density and the velocity fluctuations in the Galactic interstellar medium was found to have a Kolmogorov-like power law power spectra. The observed power law scaling of the turbulent velocity dispersion with the length scale can be used to derive the true temperature distribution of the medium. Observations from a large ongoing atomic hydrogen absorption line survey have also been used to study the distribution of gas at d...

  3. FEM Modeling of Crack Propagation in a Model Multiphase Alloy

    Institute of Scientific and Technical Information of China (English)

    Lihe QIAN; Seishi NISHIDO; Hiroyuki TODA; Tosliro KOBAYASHI

    2006-01-01

    In this paper, several widely applied fracture criteria were first numerically examined and the crack-tip-region Jintegral criterion was confirmed to be more applicable to predict fracture angle in an elastic-plastic multiphase material. Then, the crack propagation in an idealized dendritic two-phase Al-7%Si alloy was modeled using an elastic-plastic finite element method. The variation of crack growth driving force with crack extension was also demonstrated. It is found that the crack path is significantly influenced by the presence of α-phase near the crack tip, and the crack growth driving force varies drastically from place to place. Lastly, the simulated fracture path in the two-phase model alloy was compared with the experimentally observed fracture path.

  4. Parallel multiphase field simulations with OpenPhase

    Science.gov (United States)

    Tegeler, Marvin; Shchyglo, Oleg; Kamachali, Reza Darvishi; Monas, Alexander; Steinbach, Ingo; Sutmann, Godehard

    2017-06-01

    The open-source software project OpenPhase allows the three-dimensional simulation of microstructural evolution using the multiphase field method. The core modules of OpenPhase and their implementation as well as their parallelization for a distributed-memory setting are presented. Especially communication and load-balancing strategies are discussed. Synchronization points are avoided by an increased halo-size, i.e. additional layers of ghost cells, which allow multiple stencil operations without data exchange. Load-balancing is considered via graph-partitioning and sub-domain decomposition. Results are presented for performance benchmarks as well as for a variety of applications, e.g. grain growth in polycrystalline materials, including a large number of phase fields as well as Mg-Al alloy solidification.

  5. 4. Workshop - Measurement techniques of stationary and transient multiphase flow

    Energy Technology Data Exchange (ETDEWEB)

    Prasser, H.M. (ed.)

    2001-05-01

    In November 2000, the 4th Workshop on Measurement Techniques for Stationary and Transient Multiphase Flows took place in Rossendorf. Three previous workshops of this series were national meetings; this time participants from different countries took part. The programme comprised 14 oral presentations, 9 of which are included in these proceedings in full length. A special highlight of the meeting was the main lecture ''Ultrasonic doppler method for bubbly flow measurement'' of Professor Masanori Aritomi, Dr. Hiroshige Kikura and Dr. Yumiko Suzuki. The workshop again dealt with high-resolution phase distribution and phase velocity measurement techniques based on electrical conductivity, ultrasound, laser light and high-speed cinematography. A number of presentations were dedicated to the application of wire-mesh sensors developed by FZR for different applications used by the Technical Universities of Delft and Munich and the Tokyo Institute of Technology. (orig.)

  6. Cesium incorporation in hollandite-rich multiphasic ceramic waste forms

    Science.gov (United States)

    Tumurugoti, P.; Clark, B. M.; Edwards, D. J.; Amoroso, Jake; Sundaram, S. K.

    2017-02-01

    Hollandite-rich multiphase waste form compositions processed by melt-solidification and spark plasma sintering (SPS) were characterized, compared, and validated for nuclear waste incorporation. Phase identification by x-ray diffraction (XRD) and electron back-scattered diffraction (EBSD) confirmed hollandite as the major phase present in these samples along with perovskite, pyrochlore and zirconolite. Distribution of selected elements observed by wavelength dispersive spectroscopy (WDS) maps indicated that Cs formed a secondary phase during SPS processing, which was considered undesirable. On the other hand, Cs partitioned into the hollandite phase in melt-processed samples. Further analysis of hollandite structure in melt-processed composition by selected area electron diffraction (SAED) revealed ordered arrangement of tunnel ions (Ba/Cs) and vacancies, suggesting efficient Cs incorporation into the lattice.

  7. 3d Forced multiphase flow on the pore scale

    Science.gov (United States)

    Scholl, Hagen; Singh, Kamaljit; Scheel, Mario; Dimichiel, Marco; Herminghaus, Stephan; Seemann, Ralf

    2013-11-01

    Using ultra fast x-ray tomography the forced imbibition of an aqueous phase into an initially oil filled matrix is studied. The water is volume controlled flushed into cylindrical columns filled with oil saturated spherical bead packs. The oil displacement is imaged in real time having a spacial resolution of 11 microns and a temporal resolution of about 1 second. To clearly distinguish the aqueous from the oily phase a contrast agent was added to the aqueous phase. The influence of wettability, oil viscosity, gravity and flow velocity was explored and analyzed in terms of temporal development of oil saturation and front shape. It turned out that capillary forces are the key to understand the forced multiphase behavior in the explored parameter range. Funding was provided by the BP-ExploRe project.

  8. Design of multi-phase dynamic chemical networks

    Science.gov (United States)

    Chen, Chenrui; Tan, Junjun; Hsieh, Ming-Chien; Pan, Ting; Goodwin, Jay T.; Mehta, Anil K.; Grover, Martha A.; Lynn, David G.

    2017-08-01

    Template-directed polymerization reactions enable the accurate storage and processing of nature's biopolymer information. This mutualistic relationship of nucleic acids and proteins, a network known as life's central dogma, is now marvellously complex, and the progressive steps necessary for creating the initial sequence and chain-length-specific polymer templates are lost to time. Here we design and construct dynamic polymerization networks that exploit metastable prion cross-β phases. Mixed-phase environments have been used for constructing synthetic polymers, but these dynamic phases emerge naturally from the growing peptide oligomers and create environments suitable both to nucleate assembly and select for ordered templates. The resulting templates direct the amplification of a phase containing only chain-length-specific peptide-like oligomers. Such multi-phase biopolymer dynamics reveal pathways for the emergence, self-selection and amplification of chain-length- and possibly sequence-specific biopolymers.

  9. Collisional broadening of angular correlations in a multiphase transport model

    CERN Document Server

    Edmonds, Terrence; Wang, Fuqiang

    2016-01-01

    Systematic comparisons of jetlike correlation data to radiative and collisional energy loss model calculations are essential to extract transport properties of the quark-gluon medium created in relativistic heavy ion collisions. This paper presents a transport study of collisional broadening of jetlike correlations, by following parton-parton collision history in a multiphase transport (AMPT) model. The correlation shape is studied as a function of the number of parton-parton collisions suffered by a high transverse momentum probe parton ($N_{\\rm coll}$) and the azimuth of the probe relative to the reaction plane ($\\phi_{\\rm fin.}^{\\rm probe}$). Correlation is found to broaden with increasing $N_{\\rm coll}$ and $\\phi_{\\rm fin.}^{\\rm probe}$ from in- to out-of-plane direction. This study provides a transport model benchmark for future jet-medium interaction studies.

  10. Application of microwave reflectometry to disordered petroleum multiphase flow study

    Science.gov (United States)

    Jannier, B.; Dubrunfaut, O.; Ossart, F.

    2013-02-01

    Microwave reflectometry is applied to multiphase flow metering in the context of oil extraction. Our sensor consists of two open-ended coaxial probes operating at complementary frequencies (at 600 MHz and around 36 GHz) and was designed to resist harsh field conditions. This paper presents and comments on results obtained in realistic dynamic conditions, on a triphasic flow loop (water-oil-gas). The main conclusions are the following: Bruggeman-Hanai's mixing rule applies to natural emulsions and can be used to determine the composition of the water-oil liquid phase; results obtained for annular flows are very sensitive to small perturbations such as bubbles or waves at the liquid-gas interface; in the case of triphasic slug flows, the composition of the liquid phase can be estimated by proper filtering of the data.

  11. Analysis of the Multi-Phase Copying Garbage Collection Algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Podhorszki, Norbert [ORNL

    2009-01-01

    The multi-phase copying garbage collection was designed to avoid the need for large amount of reserved memory usually required for the copying types of garbage collection algorithms. The collection is performed in multiple phases using the available free memory. This paper proves that the number of phases depends on the size of the reserved memory and the ratio of the garbage and accessible objects. The performance of the implemented algorithm is tested in a fine-grained parallel Prolog system. We find that reserving only 10% of memory for garbage collection is sufficient for good performance in practice. Additionally, an improvement of the generic algorithm specifically for the tested parallel Prolog system is described.

  12. Quantitative multiphase analysis of archaeological bronzes by neutron diffraction

    CERN Document Server

    Siano, S; Celli, M; Pini, R; Salimbeni, R; Zoppi, M; Kockelmann, W A; Iozzo, M; Miccio, M; Moze, O

    2002-01-01

    In this paper, we report the first investigation on the potentials of neutron diffraction to characterize archaeological bronze artifacts. The preliminary feasibility of phase and structural analysis was demonstrated on standardised specimens with a typical bronze alloy composition. These were realised through different hardening and annealing cycles, simulating possible ancient working techniques. The Bragg peak widths that resulted were strictly dependent on the working treatment, thus providing an important analytical element to investigate ancient making techniques. The diagnostic criteria developed on the standardised specimens were then applied to study two Etruscan museum pieces. Quantitative multiphase analysis by Rietveld refinement of the diffraction patterns was successfully demonstrated. Furthermore, the analysis of patterns associated with different artifact elements also yielded evidence for some peculiar perspective of the neutron diffraction diagnostics in archeometric applications. (orig.)

  13. Segmented motor drive - with multi-phase induction motor

    DEFF Research Database (Denmark)

    Bendixen, Flemming Buus

    This PhD project commences in modulation of motor drives, i.e. having the advantage of reducing the number of variants and improves the system reliability at error situations. Four different motor drive topologies with modular construction as common denominator are compared on a general level....... The multi-phase motor is selected for further analysis. The project is limited to examine if increasing the number of phases can improve the characteristics for induction motor drives. In the literature it is demonstrated that torque production in a six-phase motor can be increased, if a 3rd harmonic...... current with 1/6 amplitude is added to the 1st harmonic current. This claim is verified and the optimization of the motor design is extended to, beyond the stator tooth width, also to include the inner diameter of the stator. This means that the lamination sheet is optimized according to two geometrical...

  14. Linear Power-Flow Models in Multiphase Distribution Networks: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Andrey; Dall' Anese, Emiliano

    2017-05-26

    This paper considers multiphase unbalanced distribution systems and develops approximate power-flow models where bus-voltages, line-currents, and powers at the point of common coupling are linearly related to the nodal net power injections. The linearization approach is grounded on a fixed-point interpretation of the AC power-flow equations, and it is applicable to distribution systems featuring (i) wye connections; (ii) ungrounded delta connections; (iii) a combination of wye-connected and delta-connected sources/loads; and, (iv) a combination of line-to-line and line-to-grounded-neutral devices at the secondary of distribution transformers. The proposed linear models can facilitate the development of computationally-affordable optimization and control applications -- from advanced distribution management systems settings to online and distributed optimization routines. Performance of the proposed models is evaluated on different test feeders.

  15. Operational Transresistance Amplifier-Based Multiphase Sinusoidal Oscillators

    Directory of Open Access Journals (Sweden)

    Rajeshwari Pandey

    2011-01-01

    Full Text Available Multiphase sinusoidal oscillator circuits are presented which utilize Operational Transresistance Amplifier (OTRA as the active element. The first circuit produces n odd-phase oscillations of equal amplitudes and equally spaced in phase. The second circuit is capable of producing n odd- or even- phase oscillations equally spaced in phase. An alternative approach is discussed in the third circuit, which utilizes a single-phase tunable oscillator circuit which is used to inject signals into a phase shifter circuits. An automatic gain control (AGC circuit has been implemented for the second and third circuit. The circuits are simple to realize and have a low component count. PSPICE simulations have been given to verify the theoretical analysis. The experimental outcome corroborates the theoretical propositions and simulated results.

  16. AOI 1— COMPUTATIONAL ENERGY SCIENCES:MULTIPHASE FLOW RESEARCH High-fidelity multi-phase radiation module for modern coal combustion systems

    Energy Technology Data Exchange (ETDEWEB)

    Modest, Michael

    2013-11-15

    The effects of radiation in particle-laden flows were the object of the present research. The presence of particles increases optical thickness substantially, making the use of the “optically thin” approximation in most cases a very poor assumption. However, since radiation fluxes peak at intermediate optical thicknesses, overall radiative effects may not necessarily be stronger than in gas combustion. Also, the spectral behavior of particle radiation properties is much more benign, making spectral models simpler (and making the assumption of a gray radiator halfway acceptable, at least for fluidized beds when gas radiation is not large). On the other hand, particles scatter radiation, making the radiative transfer equation (RTE) much more di fficult to solve. The research carried out in this project encompassed three general areas: (i) assessment of relevant radiation properties of particle clouds encountered in fluidized bed and pulverized coal combustors, (ii) development of proper spectral models for gas–particulate mixtures for various types of two-phase combustion flows, and (iii) development of a Radiative Transfer Equation (RTE) solution module for such applications. The resulting models were validated against artificial cases since open literature experimental data were not available. The final models are in modular form tailored toward maximum portability, and were incorporated into two research codes: (i) the open-source CFD code OpenFOAM, which we have extensively used in our previous work, and (ii) the open-source multi-phase flow code MFIX, which is maintained by NETL.

  17. Clean Grain Boundary Found in C14/Body-Center-Cubic Multi-Phase Metal Hydride Alloys

    Directory of Open Access Journals (Sweden)

    Hao-Ting Shen

    2016-06-01

    Full Text Available The grain boundaries of three Laves phase-related body-center-cubic (bcc solid-solution, metal hydride (MH alloys with different phase abundances were closely examined by scanning electron microscopy (SEM, transmission electron microscopy (TEM, and more importantly, electron backscatter diffraction (EBSD techniques. By using EBSD, we were able to identify the alignment of the crystallographic orientations of the three major phases in the alloys (C14, bcc, and B2 structures. This finding confirms the presence of crystallographically sharp interfaces between neighboring phases, which is a basic assumption for synergetic effects in a multi-phase MH system.

  18. Multiphase model for transformation induced plasticity. Extended Leblond's model

    Science.gov (United States)

    Weisz-Patrault, Daniel

    2017-09-01

    Transformation induced plasticity (TRIP) classically refers to plastic strains observed during phase transitions that occur under mechanical loads (that can be lower than the yield stress). A theoretical approach based on homogenization is proposed to deal with multiphase changes and to extend the validity of the well known and widely used model proposed by Leblond (1989). The approach is similar, but several product phases are considered instead of one and several assumptions have been released. Thus, besides the generalization for several phases, one can mention three main improvements in the calculation of the local equivalent plastic strain: the deviatoric part of the phase transformation is taken into account, both parent and product phases are elastic-plastic with linear isotropic hardening and the applied stress is considered. Results show that classical issues of singularities arising in the Leblond's model (corrected by ad hoc numerical functions or thresholding) are solved in this contribution excepted when the applied equivalent stress reaches the yield stress. Indeed, in this situation the parent phase is entirely plastic as soon as the phase transformation begins and the same singularity as in the Leblond's model arises. A physical explanation of the cutoff function is introduced in order to regularize the singularity. Furthermore, experiments extracted from the literature dealing with multiphase transitions and multiaxial loads are compared with the original Leblond's model and the proposed extended version. For the extended version, very good agreement is observed without any fitting procedures (i.e., material parameters are extracted from other dedicated experiments) and for the original version results are more qualitative.

  19. Advanced tomographic flow diagnostics for opaque multiphase fluids

    Energy Technology Data Exchange (ETDEWEB)

    Torczynski, J.R.; O`Hern, T.J.; Adkins, D.R.; Jackson, N.B.; Shollenberger, K.A.

    1997-05-01

    This report documents the work performed for the ``Advanced Tomographic Flow Diagnostics for Opaque Multiphase Fluids`` LDRD (Laboratory-Directed Research and Development) project and is presented as the fulfillment of the LDRD reporting requirement. Dispersed multiphase flows, particularly gas-liquid flows, are industrially important to the chemical and applied-energy industries, where bubble-column reactors are employed for chemical synthesis and waste treatment. Due to the large range of length scales (10{sup {minus}6}-10{sup 1}m) inherent in real systems, direct numerical simulation is not possible at present, so computational simulations are forced to use models of subgrid-scale processes, the accuracy of which strongly impacts simulation fidelity. The development and validation of such subgrid-scale models requires data sets at representative conditions. The ideal measurement techniques would provide spatially and temporally resolved full-field measurements of the distributions of all phases, their velocity fields, and additional associated quantities such as pressure and temperature. No technique or set of techniques is known that satisfies this requirement. In this study, efforts are focused on characterizing the spatial distribution of the phases in two-phase gas-liquid flow and in three-phase gas-liquid-solid flow. Due to its industrial importance, the bubble-column geometry is selected for diagnostics development and assessment. Two bubble-column testbeds are utilized: one at laboratory scale and one close to industrial scale. Several techniques for measuring the phase distributions at conditions of industrial interest are examined: level-rise measurements, differential-pressure measurements, bulk electrical impedance measurements, electrical bubble probes, x-ray tomography, gamma-densitometry tomography, and electrical impedance tomography.

  20. A Multi-Phase Chemo-Dynamical SPH Code for Galaxy Evolution

    OpenAIRE

    Berczik, P.; Hensler, G.; Theis, Ch.; Spurzem, R.

    2003-01-01

    In this paper we present some test results of our newly developed Multi-Phase Chemo-Dynamical Smoothed Particle Hydrodynamics (MP- CD-SPH) code for galaxy evolution. At first, we present a test of the ``pure'' hydro SPH part of the code. Then we describe and test the multi-phase description of the gaseous components of the interstellar matter. In this second part we also compare our condensation and evaporation description with the results of a previous 2d multi-phase hydrodynamic mesh code.

  1. Analytic expressions for first order correction to inviscid unsteady forces due to surrounding particles in a multiphase flow

    Science.gov (United States)

    Annamalai, Subramanian; Balachandar, S.; Mehta, Yash

    2015-11-01

    The various inviscid and viscous forces experienced by an isolated spherical particle situated in a compressible fluid have been widely studied in literature and are well established. Further, these force expressions are used even in the context of particulate (multiphase) flows with appropriate empirical correction factors that depend on local particle volume fraction. Such approach can capture the mean effect of the neighboring particles, but fails to capture the effect of the precise arrangement of the neighborhood of particles. To capture this inherent dependence of force on local particle arrangement a more accurate evaluation of the drag forces proves necessary. Towards this end, we consider an acoustic wave of a given frequency to impinge on a sphere. Scattering due to this particle (reference) is computed and termed ``scattering coefficients.'' The effect of the reference particle on another particle in its vicinity, is analytically computed via the above mentioned ``scattering coefficients'' and as a function of distance between particles. In this study, we consider only the first-order scattering effect. Moreover, this theory is extended to compressible spheres and used to compute the pressure in the interior of the sphere and to shock interaction over an array of spheres. We would like to thank the center for compressible multiphase turbulence (CCMT) and acknowledge support from the U.S. Department of Energy, National Nuclear Security Administration, Advanced Simulation and Computing Program.

  2. Interlinked multiphase Fe-doped MnO2 nanostructures: a novel design for enhanced pseudocapacitive performance

    Science.gov (United States)

    Wang, Ziya; Wang, Fengping; Li, Yan; Hu, Jianlin; Lu, Yanzhen; Xu, Mei

    2016-03-01

    Structure designing and morphology control can lead to high performance pseudocapacitive materials for supercapacitors. In this work, we have designed interlinked multiphase Fe-doped MnO2 nanostructures (α-MnO2/R-MnO2/ε-MnO2) to enhance the electrochemical properties by a facile method. These hierarchical hollow microspheres assembled by interconnected nanoflakes, and with plenty of porous nanorods radiating from the spherical shells were hydrothermally obtained. The supercapacitor electrode prepared from the unique construction exhibits outstanding specific capacitance of 267.0 F g-1 even under a high mass loading (~5 mg cm-2). Obviously improved performances compared to pure MnO2 are also demonstrated with a good rate capability, high energy density (1.30 mW h cm-3) and excellent cycling stability of 100% capacitance retention after 2000 cycles at 2 A g-1. The synergistic effects of alternative crystal structures, appropriate crystallinity and optimal morphology are identified to be responsible for the observations. This rational multiphase composite strategy provides a promising idea for materials scientists to design and prepare scalable electrode materials for energy storage devices.Structure designing and morphology control can lead to high performance pseudocapacitive materials for supercapacitors. In this work, we have designed interlinked multiphase Fe-doped MnO2 nanostructures (α-MnO2/R-MnO2/ε-MnO2) to enhance the electrochemical properties by a facile method. These hierarchical hollow microspheres assembled by interconnected nanoflakes, and with plenty of porous nanorods radiating from the spherical shells were hydrothermally obtained. The supercapacitor electrode prepared from the unique construction exhibits outstanding specific capacitance of 267.0 F g-1 even under a high mass loading (~5 mg cm-2). Obviously improved performances compared to pure MnO2 are also demonstrated with a good rate capability, high energy density (1.30 mW h cm-3) and

  3. CFD Simulation of Liquid-solid Multiphase Flow in Mud Mixer

    Directory of Open Access Journals (Sweden)

    T.Y. Kim

    2016-08-01

    Full Text Available In the present study, a computational fluid dynamics (CFD simulation was performed to analyze the mixing phenomena associated with multi-phase flow in a mud mixing system. For the validation of CFD simulation, firstly a liquid-solid multiphase flow inside horizontal pipe was simulated and compared with the experiments and other numerical simulations. And then, the multiphase flow simulation was carried out for the mud mixer in the drilling handling system in order to understand mixing phenomena and predict the mixing efficiency. For the modeling and simulation, a commercial software, STAR-CCM+, based on a finite-volume method (FVM was adopted. The simulation results for liquid-solid flow inside the pipe shows a good agreement with the experimental data. With the same multiphase model, the simulation for mud mixer is performed under the generalized boundary condition and then pressure drop through the mud mixer will be discussed.

  4. Characterization of NbC and (Nb, Ti)N nanoprecipitates in TRIP assisted multiphase steels

    NARCIS (Netherlands)

    Tirumalasetty, G.K.; Van Huis, M.A.; Fang, C.M.; Xu, Q.; Tichelaar, F.D.; Hanlon, D.N.; Sietsma, J.; Zandbergen, H.W.

    2011-01-01

    Multiphase steels utilising composite strengthening may be further strengthened via grain refinement or precipitation by the addition of microalloying elements. In this study a Nb microalloyed steel comprising martensite, bainite and retained austenite has been studied. By means of transmission

  5. Intra-abdominal desmoplastic small round-cell tumour: multiphase CT findings in two children

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jin Hyoung; Goo, Hyun Woo; Yoon, Chong Hyun [Department of Radiology, University of Ulsan College of Medicine, Asan Medical Center, 388-1 Poongnap-2 dong, Songpa-gu, Seoul, 138-736 (Korea)

    2003-06-01

    We report the multiphase CT findings of intra-abdominal desmoplastic small round-cell tumour (DSRCT) in two children. CT showed a huge heterogeneous intraperitoneal mass with or without direct invasion into solid organs such as liver or kidney, extensive intraperitoneal seeding, intratumoural calcification, ascites, and lymphadenopathy. DSRCT should be included in the differential diagnosis of malignant intraperitoneal neoplasm in children. Multiphase CT may be helpful in delineating tumour extent, vascularity and direct invasion into adjacent organs. (orig.)

  6. An original combined multiphase model of the steam-explosion premixing phase

    OpenAIRE

    Leskovar, Matjaž; Mavko, Borut

    2015-01-01

    In multiphase flow, different distributions can occur that cannot be adequately modeled with just free-surface models or with just multiphase models. Such a distribution of phases occurs for example, in isothermal steam-explosion premixing experiments, where dispersed spheres penetrate the water and the water-air surface remains sharp. A common practice when modeling isothermal premixing experiments is to treat all three phases involved - the water, the air and the spheres phase - equally, wi...

  7. Monitoring sand particle concentration in multiphase flow using acoustic emission technology

    OpenAIRE

    El-Alej, Mohamed Essid

    2014-01-01

    Multiphase flow is the simultaneous flow of two or several phases through a system such as a pipe. This common phenomenon can be found in the petroleum and chemical engineering industrial fields. Transport of sand particles in multiphase production has attracted considerable attention given sand production is a common problem especially to the oil and gas industry. The sand production causes loss of pipe wall thickness which can lead to expensive failures and loss of product...

  8. On the physics and mechanics of phase transformations in TRIP-assisted multiphase steels

    OpenAIRE

    Jacques, Pascal

    1999-01-01

    The subject of this thesis is twofold: (i) to contribute to the understanding of the phase transformations and mechanical properties of TRIP-assisted multiphase steels; (ii) to show to what extent a new TRIP-assisted multiphase steel with a reduced silicon content could meet the performance requirements for high-strength formable steels. It enlightens the correlations between Processing, Microstructure and Properties. Furthermore, the different investigations carried out in this thesis will a...

  9. Multiphase porous media modelling: A novel approach to predicting food processing performance.

    Science.gov (United States)

    Khan, Md Imran H; Joardder, M U H; Kumar, Chandan; Karim, M A

    2016-07-20

    The development of a physics-based model of food processing is essential to improve the quality of processed food and optimize energy consumption. Food materials, particularly plant-based food materials, are complex in nature as they are porous and have hygroscopic properties. A multiphase porous media model for simultaneous heat and mass transfer can provide a realistic understanding of transport processes and thus can help to optimize energy consumption and improve food quality. Although the development of a multiphase porous media model for food processing is a challenging task because of its complexity, many researchers have attempted it. The primary aim of this paper is to present a comprehensive review of the multiphase models available in the literature for different methods of food processing, such as drying, frying, cooking, baking, heating, and roasting. A critical review of the parameters that should be considered for multiphase modelling is presented which includes input parameters, material properties, simulation techniques and the hypotheses. A discussion on the general trends in outcomes, such as moisture saturation, temperature profile, pressure variation, and evaporation patterns, is also presented. The paper concludes by considering key issues in the existing multiphase models and future directions for development of multiphase models.

  10. Well testing for radially heterogeneous reservoirs under single and multiphase flow conditions

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, L.G.; Reynolds, A.C. [Univ. of Tulsa, OK (United States)

    1997-03-01

    In this work, the authors examine the behavior of pressure-transient data for single and multiphase flow in radially heterogeneous reservoirs. To illustrate multiphase flow behavior in these systems, they focus on heterogeneous gas-condensate reservoirs; however, they also consider other multiphase flow problems. It is well known that in some instances, e.g., water injection/falloff in homogeneous reservoirs, pressure-transient data from buildup (or falloff) tests cannot be obtained by superposition of drawdown (injection) pressure responses. In fact, drawdown and buildup reflect properties in different regions of the reservoir. This behavior is common to most occurrences of multiphase reservoir flow and is exaggerated in the presence of radial heterogeneity. This theoretical work describes the information contained in transient pressure derivative data and explains the fundamental difference in behavior between multiphase drawdown and buildup pressure-transient data in radially heterogeneous reservoirs. The authors show that multiphase buildup data may be treated like single-phase buildup data, but drawdown data is most indicative of properties in that region of the reservoir where mobility is changing most rapidly with time.

  11. Well testing for heterogeneous reservoirs under single and multiphase flow conditions

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, L.G.; Reynolds, A.C. [Univ. of Tulsa, OK (United States)

    1995-12-31

    In this work, we examine the behavior of pressure transient data for single and multiphase flow in heterogeneous reservoirs. In order to illustrate multiphase flow behavior in these systems, we focus on heterogeneous gas condensate reservoirs, however, we also consider other multiphase flow problems. It is well known that in some instances, e. g., water injection/falloff in homogeneous reservoirs, pressure transient data from buildup (or falloff) tests cannot be obtained by superposition of drawdown (injection) pressure responses. In fact, drawdown and buildup reflect properties in different regions of the reservoir. This behavior is common to most occurrences of multiphase reservoir flow, and is exaggerated in the presence of radial heterogeneity. This theoretical work describes the information contained in transient pressure derivative data, and explains the fundamental difference in behavior between multiphase drawdown and buildup pressure transient data in radially heterogeneous reservoirs. We show that whereas multiphase buildup data may be treated like single-phase buildup data, drawdown data is most indicative of properties in that region of the reservoir where mobility is changing most rapidly with time.

  12. Multiphase transport in polymer electrolyte membrane fuel cells

    Science.gov (United States)

    Gauthier, Eric D.

    Polymer electrolyte membrane fuel cells (PEMFCs) enable efficient conversion of fuels to electricity. They have enormous potential due to the high energy density of the fuels they utilize (hydrogen or alcohols). Power density is a major limitation to wide-scale introduction of PEMFCs. Power density in hydrogen fuel cells is limited by accumulation of water in what is termed fuel cell `flooding.' Flooding may occur in either the gas diffusion layer (GDL) or within the flow channels of the bipolar plate. These components comprise the electrodes of the fuel cell and balance transport of reactants/products with electrical conductivity. This thesis explores the role of electrode materials in the fuel cell and examines the fundamental connection between material properties and multiphase transport processes. Water is generated at the cathode catalyst layer. As liquid water accumulates it will utilize the largest pores in the GDL to go from the catalyst layer to the flow channels. Water collects to large pores via lateral transport at the interface between the GDL and catalyst layer. We have shown that water may be collected in these large pores from several centimeters away, suggesting that we could engineer the GDL to control flooding with careful placement and distribution of large flow-directing pores. Once liquid water is in the flow channels it forms slugs that block gas flow. The slugs are pushed along the channel by a pressure gradient that is dependent on the material wettability. The permeable nature of the GDL also plays a major role in slug growth and allowing bypass of gas between adjacent channels. Direct methanol fuel cells (DMFCs) have analogous multiphase flow issues where carbon dioxide bubbles accumulate, `blinding' regions of the fuel cell. This problem is fundamentally similar to water management in hydrogen fuel cells but with a gas/liquid phase inversion. Gas bubbles move laterally through the porous GDL and emerge to form large bubbles within the

  13. Compositional multiphase flow and transport in heterogeneous porous media

    Energy Technology Data Exchange (ETDEWEB)

    Huber, R.U.

    2000-07-01

    This work first treats the conceptual models for the description of multiphase flow processes in porous media. The thermodynamic laws are explained and the description and quantification of multi-fluid equilibria are discussed in order to account for fluid composition. The fully and weakly coupled approaches for the mathematical description of such flow processes with respect to systems consisting of two and three fluid phases as well as with respect to compositional single and multiphase systems are assessed. For the discretization of the two-phase flow equations node- and cell-centered finite volume methods and mixed and mixed-hybrid finite element approaches are applied. Based upon these methods five solution algorithms are developed. Four of these algorithms are based on the simultaneous solution of the discretized equations in combination with the Newton-Raphson technique. Methods 1 and 2 treat two- three-phase flow processes, Method 3 applies to the solution of partially miscible three-component systems while Method 4 is created for three-phase three-component systems. The latter method uses a variable substitution dependent on the local presence of the fluid phases. Method 5 is based on the IMPES/IMPESC concept. The time-implicit pressure equation is discretized with the mixed-hybrid finite element method. The saturation and concentration equations, respectively, are solved with a cell-centered finite volume scheme. The developed algorithms are applied to the two- and three-phase Buckley-Leverett problems. A partitioning interwell tracer test is simulated. The propagation behavior of nonaqueous phase liquids (NAPLs) in the saturated and unsaturated ground zone under the influence of heterogeneities are examined. In addition, a larger-scale experiment is simulated, which involves an injection of trichloroethylene into the subsurface and the subsequent distribution. Here, the development of a dissolved contaminant plume as well as the behavior of organic

  14. Experimental characterization of energetic material dynamics for multiphase blast simulation.

    Energy Technology Data Exchange (ETDEWEB)

    Beresh, Steven Jay; Wagner, Justin L.; Kearney, Sean Patrick; Wright, Elton K.; Baer, Melvin R.; Pruett, Brian Owen Matthew

    2011-09-01

    Currently there is a substantial lack of data for interactions of shock waves with particle fields having volume fractions residing between the dilute and granular regimes, which creates one of the largest sources of uncertainty in the simulation of energetic material detonation. To close this gap, a novel Multiphase Shock Tube has been constructed to drive a planar shock wave into a dense gas-solid field of particles. A nearly spatially isotropic field of particles is generated in the test section by a gravity-fed method that results in a spanwise curtain of spherical 100-micron particles having a volume fraction of about 19%. Interactions with incident shock Mach numbers of 1.66, 1.92, and 2.02 were achieved. High-speed schlieren imaging simultaneous with high-frequency wall pressure measurements are used to reveal the complex wave structure associated with the interaction. Following incident shock impingement, transmitted and reflected shocks are observed, which lead to differences in particle drag across the streamwise dimension of the curtain. Shortly thereafter, the particle field begins to propagate downstream and spread. For all three Mach numbers tested, the energy and momentum fluxes in the induced flow far downstream are reduced about 30-40% by the presence of the particle field. X-Ray diagnostics have been developed to penetrate the opacity of the flow, revealing the concentrations throughout the particle field as it expands and spreads downstream with time. Furthermore, an X-Ray particle tracking velocimetry diagnostic has been demonstrated to be feasible for this flow, which can be used to follow the trajectory of tracer particles seeded into the curtain. Additional experiments on single spherical particles accelerated behind an incident shock wave have shown that elevated particle drag coefficients can be attributed to increased compressibility rather than flow unsteadiness, clarifying confusing results from the historical database of shock tube

  15. Design and Development of Integrated Compact Multiphase Separation System (CMSS)

    Energy Technology Data Exchange (ETDEWEB)

    Ram S. Mohan; Ovadia Shoham

    2006-04-30

    The petroleum industry has relied in the past mainly on conventional vessel-type separators, which are bulky, heavy and expensive, to process wellhead production of oil-water-gas flow. Economic and operational pressures continue to force the petroleum industry to seek less expensive and more efficient separation alternatives in the form of compact separators. The compact dimensions, smaller footprint and lower weight of compact separators have a potential for cost savings to the industry, especially in offshore and subsea applications. Also, compact separators reduce the inventory of hydrocarbons significantly, which is critical for environmental This report presents a brief overview of the activities and tasks accomplished during the Budget Period II (October 09, 2004-April 30, 2006) of the DOE project titled ''Design and Development of Integrated Compact Multiphase Separation System (CMSS{copyright})''. An executive summary is presented initially followed by the tasks of the current budget period. Then, detailed description of the experimental and modeling investigations are presented. Subsequently, the technical and scientific results of the activities of this project period are presented with discussions. The findings of this investigation are summarized in the ''Conclusions'' section In this investigation, the concept of CMSS{copyright} has been developed and is proven through simulation studies and validated by experimental data. As part of the second phase of the project (Budget Period II--10/09/2004-04/30/2006) experimental investigation of the integrated CMSS{copyright} for different configurations has been conducted in order to evaluate the performance of the individual separation components, and determine how they will affect the performance of each other when integrated in the CMSS{copyright}. An intelligent control system is also developed to improve the total system efficiency of Compact Multiphase Separation

  16. Experimental characterization of energetic material dynamics for multiphase blast simulation.

    Energy Technology Data Exchange (ETDEWEB)

    Beresh, Steven Jay; Wagner, Justin L.; Kearney, Sean Patrick; Wright, Elton K.; Baer, Melvin R.; Pruett, Brian Owen Matthew

    2011-09-01

    Currently there is a substantial lack of data for interactions of shock waves with particle fields having volume fractions residing between the dilute and granular regimes, which creates one of the largest sources of uncertainty in the simulation of energetic material detonation. To close this gap, a novel Multiphase Shock Tube has been constructed to drive a planar shock wave into a dense gas-solid field of particles. A nearly spatially isotropic field of particles is generated in the test section by a gravity-fed method that results in a spanwise curtain of spherical 100-micron particles having a volume fraction of about 19%. Interactions with incident shock Mach numbers of 1.66, 1.92, and 2.02 were achieved. High-speed schlieren imaging simultaneous with high-frequency wall pressure measurements are used to reveal the complex wave structure associated with the interaction. Following incident shock impingement, transmitted and reflected shocks are observed, which lead to differences in particle drag across the streamwise dimension of the curtain. Shortly thereafter, the particle field begins to propagate downstream and spread. For all three Mach numbers tested, the energy and momentum fluxes in the induced flow far downstream are reduced about 30-40% by the presence of the particle field. X-Ray diagnostics have been developed to penetrate the opacity of the flow, revealing the concentrations throughout the particle field as it expands and spreads downstream with time. Furthermore, an X-Ray particle tracking velocimetry diagnostic has been demonstrated to be feasible for this flow, which can be used to follow the trajectory of tracer particles seeded into the curtain. Additional experiments on single spherical particles accelerated behind an incident shock wave have shown that elevated particle drag coefficients can be attributed to increased compressibility rather than flow unsteadiness, clarifying confusing results from the historical database of shock tube

  17. ASSESSMENT OF A CENTRAL DIFFERENCE FINITE VOLUME SCHEME FOR MODELING OF CAVITATING FLOWS USING PRECONDITIONED MULTIPHASE EULER EQUATIONS

    Institute of Scientific and Technical Information of China (English)

    HEJRANFAR Kazem; FATTAH-HESARY Kasra

    2011-01-01

    A numerical treatment for the prediction of cavitating flows is presented and assessed.The algorithm uses the preconditioned multiphase Euler equations with appropriate mass transfer terms.A central difference finite volume scheme with suitable dissipation terms to account for density jumps across the cavity interface is shown to yield an effective method for solving the multiphase Euler equations.The Euler equations are utilized herein for the cavitation modeling, because some certain characteristics of cavitating flows can be obtained using the solution of this system of equations with relative low computational effort.In addition, the Euler equations are appropriate for the assessment of the numerical method used, because of the sensitivity of the solution to the numerical instabilities.For this reason, a sensitivity study is conducted to evaluate the effects of various parameters, such as numerical dissipation coefficients and grid size, on the accuracy and performance of the solution.The computations are performed for steady cavitating flows around the NACA 0012 and NACA 66 (MOD) hydrofoils and also an axisymmetric hemispherical fore-body under different conditions and the results are compared with the available numerical and experimental data.The solution procedure presented is shown to be accurate and efficient for predicting steady sheet- and super-cavitation for 2D/axisymmetric geometries.

  18. Determining Individual Phase Properties in a Multi-phase Q&P Steel using Multi-scale Indentation Tests

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Guang; Choi, Kyoo Sil; Hu, Xiaohua; Sun, Xin

    2016-01-15

    A new inverse method was developed to predict the stress-strain behaviors of constituent phases in a multi-phase steel using the load-depth curves measured in nanoindentation tests combined with microhardness measurements. A power law hardening response was assumed for each phase, and an empirical relationship between hardness and yield strength was assumed. Adjustment was made to eliminate the indentation size effect and indenter bluntness effect. With the newly developed inverse method and statistical analysis of the hardness histogram for each phase, the average stress-strain curves of individual phases in a quench and partitioning (Q&P) steel, including austenite, tempered martensite and untempered martensite, were calculated and the results were compared with the phase properties obtained by in-situ high energy X-ray diffraction (HEXRD) test. It is demonstrated that multi-scale instrumented indentation tests together with the new inverse method are capable of determining the individual phase flow properties in multi-phase alloys.

  19. AM-DMC-AMPS Multi-Functionalized Magnetic Nanoparticles for Efficient Purification of Complex Multiphase Water System

    Science.gov (United States)

    Ge, Yuru; Li, Yushu; Zu, Baiyi; Zhou, Chaoyu; Dou, Xincun

    2016-04-01

    Complex multiphase waste system purification, as one of the major challenges in many industrial fields, urgently needs an efficient one-step purification method to remove several pollutants simultaneously and efficiently. Multi-functionalized magnetic nanoparticles, Fe3O4@SiO2-MPS-AM-DMC-AMPS, were facilely prepared via a one-pot in situ polymerization of three different functional monomers, AM, DMC, and AMPS, on a Fe3O4@SiO2-MPS core-shell structure. The multi-functionalized magnetic nanoparticles (MNPs) are proven to be a highly effective purification agent for oilfield wastewater, an ideal example of industrial complex multiphase waste system containing cations, anions, and organic pollutants. Excellent overall removal efficiencies for both cations, including K+, Ca2+, Na+, and Mg2+ of 80.68 %, and anions, namely Cl- and SO4 2-, of 85.18 % along with oil of 97.4 % were shown. The high removal efficiencies are attributed to the effective binding of the functional groups from the selected monomers with cations, anions, and oil emulsions.

  20. A Mathematical Model for the Multiphase Transport and Reaction Kinetics in a Ladle with Bottom Powder Injection

    Science.gov (United States)

    Lou, Wentao; Zhu, Miaoyong

    2017-08-01

    A computation fluid dynamics-population balance model-simultaneous reaction model (CFD-PBM-SRM) coupled model has been proposed to study the multiphase flow behavior and refining reaction kinetics in a ladle with bottom powder injection, and some new and important phenomena and mechanisms are presented. For the multiphase flow behavior, the effects of bubbly plume flow, powder particle motion, particle-particle collision and growth, particle-bubble collision and adhesion, and powder particle removal into top slag are considered. For the reaction kinetics, the mechanisms of multicomponent simultaneous reactions, including Al, S, Si, Mn, Fe, and O, at the multi-interface, including top slag-liquid steel interface, air-liquid steel interface, powder droplet-liquid steel interface, and bubble-liquid steel interface, are presented, and the effect of sulfur solubility in the powder droplet on the desulfurization is also taken into account. Model validation is carried out using hot tests in a 2-t induction furnace with bottom powder injection. The result shows that the powder particles gradually disperse in the entire furnace; in the vicinity of the bottom slot plugs, the desulfurization product CaS is liquid phase, while in the upper region of the furnace, the desulfurization product CaS is solid phase. The predicted sulfur contents by the present model agree well with the measured data in the 2-t furnace with bottom powder injection.

  1. AM-DMC-AMPS Multi-Functionalized Magnetic Nanoparticles for Efficient Purification of Complex Multiphase Water System.

    Science.gov (United States)

    Ge, Yuru; Li, Yushu; Zu, Baiyi; Zhou, Chaoyu; Dou, Xincun

    2016-12-01

    Complex multiphase waste system purification, as one of the major challenges in many industrial fields, urgently needs an efficient one-step purification method to remove several pollutants simultaneously and efficiently. Multi-functionalized magnetic nanoparticles, Fe3O4@SiO2-MPS-AM-DMC-AMPS, were facilely prepared via a one-pot in situ polymerization of three different functional monomers, AM, DMC, and AMPS, on a Fe3O4@SiO2-MPS core-shell structure. The multi-functionalized magnetic nanoparticles (MNPs) are proven to be a highly effective purification agent for oilfield wastewater, an ideal example of industrial complex multiphase waste system containing cations, anions, and organic pollutants. Excellent overall removal efficiencies for both cations, including K(+), Ca(2+), Na(+), and Mg(2+) of 80.68 %, and anions, namely Cl(-) and SO4 (2-), of 85.18 % along with oil of 97.4 % were shown. The high removal efficiencies are attributed to the effective binding of the functional groups from the selected monomers with cations, anions, and oil emulsions.

  2. Synthesis of Biologically Active Dipeptide in a Multiphase Enzyme Membrane Reactor%多相酶膜反应器合成生物活性二肽

    Institute of Scientific and Technical Information of China (English)

    姜忠义; 贾琦鹏; 刘家祺; 陈洪钫

    2001-01-01

    A multiphase enzyme membrane reactor using aqueous-organicbiphase instead of water phase alone as the reaction medium was employed to investigate the lipase-catalyzed synthesis of bioactive dipeptides. The medium effect on dipeptide yield was first studied. When N-acetyl-L-phenylalanine ethyl ester(APEE) was used as a carboxyl component, the reactivity order of amino acid amides was found to be L-Leu-NH2>L-Val-NH2>L-Ala-NH2>L-Gly-NH2. The didpetide, N-Ac-L-Phe-L-Leu-NH2, could be synthesized in the multiphase enzyme membrane reactor in a high yield and purity due to the simultaneous separation and reaction.

  3. 固体颗粒对流化床多相蒸发海水淡化操作浓缩比及膜传热系数的影响%Effects of solid particles on experimental concentration factor of seawater desalination and film heat transfer coefficient in fluidized bed with multi-phase evaporation

    Institute of Scientific and Technical Information of China (English)

    弓凯雷; 王德武; 刘燕; 张少峰

    2012-01-01

    Increasing seawater desalination concentration factor can improve the performance ratio and effectively reduce the post-treatment cost of the concentrated seawater that is reused, therefore, it is one of the keys to realizing low-cost zero discharge of seawater desalination. The experiment was carried out in a multi-phase circulating fluidization bed (CFB) evaporator.It aimed to study the effects of particle volume fraction on seawater desalination concentration factor and film heat transfer coefficient. The main components of the scaling were also analyzed. The operations of vapor-liquid two-phase boiling flow and vapor-liquid-solid three-phase boiling flow were investigated in the experiment. The results showed that calcium sulfate is the main component of the scaling, and it was firstly separated out in the seawater desalination experiment. In the vapor-liquid two-phase boiling flow, the film heat transfer coefficient was kept at 1. 75 kW · m~2 · K-1 and concentration factor reached 3. 8. In the vapor-liquid-solid three-phase boiling flow, the result revealed that solid particles remarkably enhanced heat transfer and jmproved the prevention and removal of fouling. When particle volume fraction was 4% and film heat transfer coefficient was kept at 2. 3 kW · m-2 · K -1 , seawater desalination concentration factor reached more than 5. 8.%提高海水淡化操作浓缩比,不仅可以提高造水比,还可以有效降低淡化后浓海水再利用的后处理成本,故其是实现低成本零排放的关键之一.在一套循环流化床多相蒸发海水淡化实验装置上,分别采用汽-液两相及汽-液-固三相操作,考察固体颗粒对海水淡化操作浓缩比及膜传热系数的影响,并分析垢层的主要成分.实验表明:高温下CaSO4首先析出,是形成垢层的主要成分;采取汽-液两相操作,膜传热系数保持在1.75 kW·m-2·K-1左右,操作浓缩比可达到3.8左右;采取汽-液-固三相操作,固体颗粒强化

  4. Hybrid Explicit Residual Distribution Scheme for Compressible Multiphase Flows

    Science.gov (United States)

    Bacigaluppi, Paola; Abgrall, Rémi; Kaman, Tulin

    2017-03-01

    The aim of this work is the development of a fully explicit scheme in the framework of time dependent hyperbolic problems with strong interacting discontinuities to retain high order accuracy in the context of compressible multiphase flows. A new methodology is presented to compute compressible two-fluid problems applied to the five equation reduced model given in Kapila et al. (Physics of Fluids 2001). With respect to other contributions in that area, we investigate a method that provides mesh convergence to the exact solutions, where the studied non-conservative system is associated to consistent jump relations. The adopted scheme consists of a coupled predictor-corrector scheme, which follows the concept of residual distributions in Ricchiuto and Abgrall (J. Comp. Physics 2010), with a classical Glimm’s scheme (J. Sci. Stat. Comp. 1982) applied to the area where a shock is occurring. This numerical methodology can be easily extended to unstructured meshes. Test cases on a perfect gas for a two phase compressible flow on a Riemann problem have verified that the approximation converges to its exact solution. The results have been compared with the pure Glimm’s scheme and the expected exact solution, finding a good overlap.

  5. Modelling Galaxies with a 3d Multi-Phase ISM

    CERN Document Server

    Harfst, S; Hensler, G; Harfst, Stefan; Theis, Christian; Hensler, Gerhard

    2005-01-01

    We present a new particle code for modelling the evolution of galaxies. The code is based on a multi-phase description for the interstellar medium (ISM). We included star formation (SF), stellar feedback by massive stars and planetary nebulae, phase transitions and interactions between gas clouds and ambient diffuse gas, namely condensation, evaporation, drag and energy dissipation. The latter is realised by radiative cooling and inelastic cloud-cloud collisions. We present new schemes for SF and stellar feedback. They include a consistent calculation of the star formation efficiency (SFE) based on ISM properties as well as a detailed redistribution of the feedback energy into the different ISM phases. As a first test example we show a model of the evolution of a present day Milky-Way-type galaxy. Though the model exhibits a quasi-stationary behaviour in global properties like mass fractions or surface densities, the evolution of the ISM is locally strongly variable depending on the local SF and stellar feedb...

  6. Particle-in-cell method in multiphase flow simulations

    Science.gov (United States)

    Zhang, Duan; Zou, Qisu; Vanderheyden, Brian

    2004-11-01

    In many disperse multiphase flows there is of great interest to know the deformations and the possibility of break up of the grains of the disperse phase. Some examples are the pneumatic transport of agriculture grains and the fragment-gas-structure interaction in an explosion. In these examples one needs to consider the stress states in both the disperse phase and the continuous phase. The use of Eulerian method encounters significant difficulties associated with numerical diffusion. The use of Lagrangian method encounters mesh-tangling problem. Expensive re-meshing procedures need to be done frequently. The particle-in-cell method possesses advantages of both methods while avoids their difficulties. A grain of the disperse phase is represented by particles. A particle in the method is not only a Lagrangian marker; it carries mass, momentum, energy and other quantities associated with the grain. Although the particle-in-cell method was invented in the sixties, its recent developments significantly enhanced its capabilities. In this presentation, we outline basic principles and numerical schemes of the particle-in-cell method and then provide examples of its applications. This work is supported by the U.S. Department of Energy. (LA-UR-04-4177)

  7. Laser velocimeter measurements of multiphase flow of solids

    Energy Technology Data Exchange (ETDEWEB)

    Kadambi, J.R.; Chen, R.C.; Bhunia, S.

    1989-01-01

    A unique refractive index matched facility for studying solid-liquid multiphase flow has been developed. The refractive index matching of the solid and the liquid allows the use of non-intrusive Laser Doppler Velocimetry (LDV) to measure the solid and the liquid velocities. These measurements will be useful in developing a better understanding of solid-liquid flows, especially solid-liquid and solid-solid interactions. Silica gel and 50% sodium iodide solution in water (refractive index {approx}1.443) are used as the refractive index matched solid and liquid respectively. A two color back scatter mode LDV is used for making velocity measurements. Tests were conducted in solid-liquid slurries with volumetric solid concentration levels of 5% and 15% in the Reynolds number (Re) range of 400 to 9200. Silica gel particles of mean diameter 40 microns were used. Measurements included mapping of the solid and liquid velocities and obtaining the pressure drop data. Signal processing technique utilizing histogram of velocity measurements made at a point and signal amplitude discrimination was successfully used for differentiating between solid and liquid velocities. 34 refs., 61 figs., 5 tabs.

  8. A Statistical investigation of sloshing parameters for multiphase offshore separators

    Science.gov (United States)

    Mahmud, Md; Khan, Rafiqul; Xu, Qiang

    Liquid sloshing in multiphase offshore separators has been the subject of intense investigations for last several decades both by experiments and simulations. Large number scientists have worked to minimize sloshing impacts/intensity and some others have developed new methods to describe the sloshing patterns. In addition, complex mathematical models are developed to characterize sloshing phenomenon. However, a comprehensive statistical study of the input parameters and output results is not yet been studied. In this study, statistical approach will be considered to determine the significant parameters for liquid sloshing. The factor analysis and principal component analysis techniques are considered to identify the significant parameters for liquid sloshing. Numerical experiments are carried out through Computation Fluid Dynamics (CFD) technique using ANSYS Fluent software. The input parameters considered here are liquid depth/tank length ratio, tank acceleration, wave frequencies, amplitudes in various sea state conditions .The measured variables include hydrodynamic force, pressure, moments, turbulent kinetic energy, height of the free surface, vorticity. Mathematical correlations may be developed from the data analysis. Doctoral Candidate Dept of Chemical Engineering Lamar University, Beaumont, TX 77710.

  9. Improved quark coalescence for a multi-phase transport model

    Science.gov (United States)

    He, Yuncun; Lin, Zi-Wei

    2017-07-01

    The string melting version of a multi-phase transport model is often applied to high-energy heavy-ion collisions since the dense matter thus formed is expected to be in parton degrees of freedom. In this work we improve its quark coalescence component, which describes the hadronization of the partonic matter to a hadronic matter. We removed the previous constraint that forced the numbers of mesons, baryons, and antibaryons in an event to be separately conserved through the quark coalescence process. A quark now could form either a meson or a baryon depending on the distance to its coalescence partner(s). We then compare results from the improved model with the experimental data on hadron d N /d y ,pT spectra, and v2 in heavy-ion collisions from √{s NN}=62.4 GeV to 5.02 TeV. We show that, besides being able to describe these observables for low-pTpions and kaons, the improved model also better describes the low-p T baryon observables in general, especially the baryon p T spectra and antibaryon-to-baryon ratios for multistrange baryons.

  10. Modelling Dust Evolution in Galaxies with a Multiphase, Inhomogeneous ISM

    CERN Document Server

    Zhukovska, Svitlana; Jenkins, Edward B; Klessen, Ralf

    2016-01-01

    We develop a model of dust evolution in a multiphase, inhomogeneous ISM including dust growth and destruction processes. The physical conditions for grain evolution are taken from hydrodynamical simulations of giant molecular clouds in a Milky Way-like spiral galaxy. We improve the treatment of dust growth by accretion in the ISM to investigate the role of the temperature-dependent sticking coefficient and ion-grain interactions. From detailed observational data on the gas-phase Si abundances [Si/H]_{gas} measured in the local Galaxy, we derive a relation between the average [Si/H]_{gas} and the local gas density n(H) which we use as a critical constraint for the models. This relation requires a sticking coefficient that decreases with the gas temperature. The synthetic relation constructed from the spatial dust distribution reproduces the slope of -0.5 of the observed relation in cold clouds. This slope is steeper than that for the warm medium and is explained by the dust growth. We find that it occurs for a...

  11. Initial partonic eccentricity fluctuations in a multiphase transport model

    Science.gov (United States)

    Ma, L.; Ma, G. L.; Ma, Y. G.

    2016-10-01

    Initial partonic eccentricities in Au+Au collisions at center-of-mass energy √{sN N}=200 GeV are investigated by using a multiphase transport model with a string-melting scenario. The initial eccentricities in different order of harmonics are studied by using participant and cumulant definitions. Eccentricity in terms of second-, fourth- and sixth-order cumulants as a function of number of participant nucleons are compared systematically with the traditional participant definition. The ratio of the cumulant eccentricities ɛ {4 }/ɛ {2 } and ɛ {6 }/ɛ {4 } are studied in comparison with the ratio of the corresponding flow harmonics. The conversion coefficients (vn/ɛn ) are explored up to fourth-order harmonics based on the cumulant method. Furthermore, studies on transverse momentum (pT) and pseudorapidity (η ) dependencies of eccentricities and their fluctuations are presented. As in ideal hydrodynamics, initial eccentricities are expected to be closely related to the final flow harmonics in relativistic heavy-ion collisions, studies of the fluctuating initial condition in the AMPT model will shed light on the tomography properties of the initial source geometry.

  12. Anisotropic distributions in a multi-phase transport model

    CERN Document Server

    Zhou, You; Feng, Zhao; Liu, Feng; Snellings, Raimond

    2015-01-01

    With A Multi-Phase Transport (AMPT) model we investigate the relation between the magnitude, fluctuations and correlations of the initial state spatial anisotropy $\\varepsilon_{n}$ and the final state anisotropic flow coefficients $v_{n}$ in Au+Au collisions at $\\sqrt{s_{_{\\rm NN}}}=$ 200 GeV. It is found that the relative eccentricity fluctuations in AMPT account for the observed elliptic flow fluctuations, in agreement with measurements of the STAR collaboration. In addition, the studies based on 2- and multi-particle correlations and event-by-event distributions of the anisotropies suggest that the Elliptic-Power function is a promising candidate of the underlying probability density function of the event-by-event distributions of $\\varepsilon_{n}$ as well as $v_{n}$. Furthermore, the correlations between different order symmetry planes and harmonics in the initial coordinate space and final state momentum space are presented. Non-zero values of these correlations have been observed. The comparison between...

  13. Black hole feedback in a multiphase interstellar medium

    CERN Document Server

    Bourne, Martin A; Hobbs, Alexander

    2014-01-01

    Ultrafast outflows (UFOs) from supermassive black holes (SMBHs) are thought to regulate the growth of SMBHs and host galaxies, resulting in a number of observational correlations. We present high-resolution numerical simulations of the impact of a thermalized UFO on the ambient gas in the inner part of the host galaxy. Our results depend strongly on whether the gas is homogeneous or clumpy. In the former case all of the ambient gas is driven outward rapidly as expected based on commonly used energy budget arguments, while in the latter the flows of mass and energy decouple. Carrying most of the energy, the shocked UFO escapes from the bulge via paths of least resistance, taking with it only the low-density phase of the host. Most of the mass is however in the high-density phase, and is affected by the UFO much less strongly, and may even continue to flow inwards. We suggest that the UFO energy leakage through the pores in the multiphase interstellar medium (ISM) may explain why observed SMBHs are so massive d...

  14. Unsteady RANS and Large Eddy simulations of multiphase diesel injection

    Science.gov (United States)

    Philipp, Jenna; Green, Melissa; Akih-Kumgeh, Benjamin

    2015-11-01

    Unsteady Reynolds Averaged Navier-Stokes (URANS) and Large Eddy Simulations (LES) of two-phase flow and evaporation of high pressure diesel injection into a quiescent, high temperature environment is investigated. Unsteady RANS and LES are turbulent flow simulation approaches used to determine complex flow fields. The latter allows for more accurate predictions of complex phenomena such as turbulent mixing and physio-chemical processes associated with diesel combustion. In this work we investigate a high pressure diesel injection using the Euler-Lagrange method for multiphase flows as implemented in the Star-CCM+ CFD code. A dispersed liquid phase is represented by Lagrangian particles while the multi-component gas phase is solved using an Eulerian method. Results obtained from the two approaches are compared with respect to spray penetration depth and air entrainment. They are also compared with experimental data taken from the Sandia Engine Combustion Network for ``Spray A''. Characteristics of primary and secondary atomization are qualitatively evaluated for all simulation modes.

  15. Multiphase Flow Technology Impacts on Thermal Control Systems for Exploration

    Science.gov (United States)

    McQuillen, John; Sankovic, John; Lekan, Jack

    2006-01-01

    The Two-Phase Flow Facility (TPHIFFy) Project focused on bridging the critical knowledge gap by developing and demonstrating critical multiphase fluid products for advanced life support, thermal management and power conversion systems that are required to enable the Vision for Space Exploration. Safety and reliability of future systems will be enhanced by addressing critical microgravity fluid physics issues associated with flow boiling, condensation, phase separation, and system stability. The project included concept development, normal gravity testing, and reduced gravity aircraft flight campaigns, in preparation for the development of a space flight experiment implementation. Data will be utilized to develop predictive models that could be used for system design and operation. A single fluid, two-phase closed thermodynamic loop test bed was designed, assembled and tested. The major components in this test bed include: a boiler, a condenser, a phase separator and a circulating pump. The test loop was instrumented with flow meters, thermocouples, pressure transducers and both high speed and normal speed video cameras. A low boiling point surrogate fluid, FC-72, was selected based on scaling analyses using preliminary designs for operational systems. Preliminary results are presented which include flow regime transitions and some observations regarding system stability.

  16. Multiphase Signatures of AGN Feedback in Abell 2597

    CERN Document Server

    Tremblay, G R; Baum, S A; Clarke, T E; Sarazin, C L; Bregman, J N; Combes, F; Donahue, M; Edge, A C; Fabian, A C; Ferland, G J; McNamara, B R; Mittal, R; Oonk, J B R; Quillen, A C; Russell, H R; Sanders, J S; Salomé, P; Voit, G M; Wilman, R J; Wise, M W

    2012-01-01

    We present new Chandra X-ray observations of the brightest cluster galaxy (BCG) in the cool core cluster Abell 2597. The data reveal an extensive kpc-scale X-ray cavity network as well as a 15 kpc filament of soft-excess gas exhibiting strong spatial correlation with archival VLA radio data. In addition to several possible scenarios, multiwavelength evidence may suggest that the filament is associated with multiphase (10^3 - 10^7 K) gas that has been entrained and dredged-up by the propagating radio source. Stemming from a full spectral analysis, we also present profiles and 2D spectral maps of modeled X-ray temperature, entropy, pressure, and metal abundance. The maps reveal an arc of hot gas which in projection borders the inner edge of a large X-ray cavity. Although limited by strong caveats, we suggest that the hot arc may be (a) due to a compressed rim of cold gas pushed outward by the radio bubble or (b) morphologically and energetically consistent with cavity-driven active galactic nucleus (AGN) heatin...

  17. Multiphasic strain differentiation of atypical mycobacteria from elephant trunk wash.

    Science.gov (United States)

    Chan, Kok-Gan; Loke, Mun Fai; Ong, Bee Lee; Wong, Yan Ling; Hong, Kar Wai; Tan, Kian Hin; Kaur, Sargit; Ng, Hien Fuh; Abdul Razak, Mfa; Ngeow, Yun Fong

    2015-01-01

    Background. Two non-tuberculous mycobacterial strains, UM_3 and UM_11, were isolated from the trunk wash of captive elephants in Malaysia. As they appeared to be identical phenotypes, they were investigated further by conventional and whole genome sequence-based methods of strain differentiation. Methods. Multiphasic investigations on the isolates included species identification with hsp65 PCR-sequencing, conventional biochemical tests, rapid biochemical profiling using API strips and the Biolog Phenotype Microarray analysis, protein profiling with liquid chromatography-mass spectrometry, repetitive sequence-based PCR typing and whole genome sequencing followed by phylogenomic analyses. Results. The isolates were shown to be possibly novel slow-growing schotochromogens with highly similar biological and genotypic characteristics. Both strains have a genome size of 5.2 Mbp, G+C content of 68.8%, one rRNA operon and 52 tRNAs each. They qualified for classification into the same species with their average nucleotide identity of 99.98% and tetranucleotide correlation coefficient of 0.99999. At the subspecies level, both strains showed 98.8% band similarity in the Diversilab automated repetitive sequence-based PCR typing system, 96.2% similarity in protein profiles obtained by liquid chromatography mass spectrometry, and a genomic distance that is close to zero in the phylogenomic tree constructed with conserved orthologs. Detailed epidemiological tracking revealed that the elephants shared a common habitat eight years apart, thus, strengthening the possibility of a clonal relationship between the two strains.

  18. Predicting the growth of glioblastoma multiforme spheroids using a multiphase porous media model.

    Science.gov (United States)

    Mascheroni, Pietro; Stigliano, Cinzia; Carfagna, Melania; Boso, Daniela P; Preziosi, Luigi; Decuzzi, Paolo; Schrefler, Bernhard A

    2016-10-01

    Tumor spheroids constitute an effective in vitro tool to investigate the avascular stage of tumor growth. These three-dimensional cell aggregates reproduce the nutrient and proliferation gradients found in the early stages of cancer and can be grown with a strict control of their environmental conditions. In the last years, new experimental techniques have been developed to determine the effect of mechanical stress on the growth of tumor spheroids. These studies report a reduction in cell proliferation as a function of increasingly applied stress on the surface of the spheroids. This work presents a specialization for tumor spheroid growth of a previous more general multiphase model. The equations of the model are derived in the framework of porous media theory, and constitutive relations for the mass transfer terms and the stress are formulated on the basis of experimental observations. A set of experiments is performed, investigating the growth of U-87MG spheroids both freely growing in the culture medium and subjected to an external mechanical pressure induced by a Dextran solution. The growth curves of the model are compared to the experimental data, with good agreement for both the experimental settings. A new mathematical law regulating the inhibitory effect of mechanical compression on cancer cell proliferation is presented at the end of the paper. This new law is validated against experimental data and provides better results compared to other expressions in the literature.

  19. A new look at multiphase invasion with applications to borehole resistivity interpretation

    Science.gov (United States)

    Cozzolino, K.; Howard, A. Q.; Protázio, J. S.

    2000-01-01

    In well log interpretation, it is frequently necessary to correct logs for invasion. Invasion occurs in permeable formations when there is a radial differential pressure (RDP) between the borehole and formation. Other factors on which invasion depend include saturation, mobility, pressure (RDP) and capillary pressure, permeability and viscosity of fluids, and temperature transient effects associated with the mud filtrate injected into the formation. Thus, simulation of realistic invasion is not an easy task. This work reviews the famous Buckley-Leverett mathematical model in cylindrical coordinates appropriate for borehole geometries. The model predicts multiphase invasion in porous media when gravity, capillary pressure, and mud cake can be neglected. One application is to correct logging while drilling (LWD) and wireline resistivity logs for time-dependent invasion and formation temperature effects. This is important, for example, when there are possible large differences in formation and mud temperature. Modeling studies show these effects can be large enough to noticeably influence resistivity logs. However, after correction, difference in LWD and wireline logs arising from the time-dependent heat process are explained. Thus, the method, when coupled to a time-dependent heat flow model, and a response function formulation of resistivity, yields new insight into the influence of thermal and electrical transients in log interpretation.

  20. Third harmonic current injection into highly saturated multi-phase machines

    Directory of Open Access Journals (Sweden)

    Klute Felix

    2017-03-01

    Full Text Available One advantage of multi-phase machines is the possibility to use the third harmonic of the rotor flux for additional torque generation. This effect can be maximised for Permanent Magnet Synchronous Machines (PMSM with a high third harmonic content in the magnet flux. This paper discusses the effects of third harmonic current injection (THCI on a five-phase PMSM with a conventional magnet shape depending on saturation. The effects of THCI in five-phase machines are shown in a 2D FEM model in Ansys Maxwell verified by measurement results. The results of the FEM model are analytically analysed using the Park model. It is shown in simulation and measurement that the torque improvement by THCI increases significantly with the saturation level, as the amplitude of the third harmonic flux linkage increases with the saturation level but the phase shift of the rotor flux linkage has to be considered. This paper gives a detailed analysis of saturation mechanisms of PMSM, which can be used for optimizing the efficiency in operating points of high saturations, without using special magnet shapes.

  1. Multi-phase micro-scale flow simulation in the electrodes of a PEM fuel cell by lattice Boltzmann method

    Science.gov (United States)

    Park, J.; Li, X.

    The gas diffusion layer of a polymer electrolyte membrane (PEM) fuel cell is a porous medium generally made of carbon cloth or paper. The gas diffusion layer has been modeled conventionally as a homogeneous porous medium with a constant permeability in the literature of PEM fuel cell. However, in fact, the permeability of such fibrous porous medium is strongly affected by the fiber orientation having non-isotropic permeability. In this work, the lattice Boltzmann (LB) method is applied to the multi-phase flow phenomenon in the inhomogeneous gas diffusion layer of a PEM fuel cell. The inhomogeneous porous structure of the carbon cloth and carbon paper has been modeled as void space and porous area using Stokes/Brinkman formulation and void space and impermeable fiber distributions obtained from various microscopic images. The permeability of the porous medium is calculated and compared to the experimental measurements in literature showing a good agreement. Simulation results for various fiber distributions indicate that the permeability of the medium is strongly influenced by the effect of fiber orientation. Present lattice Boltzmann flow models are applied to the multi-phase flow simulations by incorporating multi-component LB model with inter-particle interaction forces. The model successfully simulates the complicated unsteady behaviors of liquid droplet motion in the porous medium providing a useful tool to investigate the mechanism of liquid water accumulation/removal in a gas diffusion layer of a PEM fuel cell.

  2. TOURGHREACT: A Simulation Program for Non-isothermal MultiphaseReactive Geochemical Transport in Variably Saturated GeologicMedia

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Tianfu; Sonnenthal, Eric; Spycher, Nicolas; Pruess, Karsten

    2004-12-07

    TOUGHREACT is a numerical simulation program for chemically reactive non-isothermal flows of multiphase fluids in porous and fractured media. The program was written in Fortran 77 and developed by introducing reactive geochemistry into the multiphase fluid and heat flow simulator TOUGH2. A variety of subsurface thermo-physical-chemical processes are considered under a wide range of conditions of pressure, temperature, water saturation, ionic strength, and pH and Eh. Interactions between mineral assemblages and fluids can occur under local equilibrium or kinetic rates. The gas phase can be chemically active. Precipitation and dissolution reactions can change formation porosity and permeability. The program can be applied to many geologic systems and environmental problems, including geothermal systems, diagenetic and weathering processes, subsurface waste disposal, acid mine drainage remediation, contaminant transport, and groundwater quality. Here we present two examples to illustrate applicability of the program: (1) injectivity effects of mineral scaling in a fractured geothermal reservoir and (2) CO2 disposal in a deep saline aquifer.

  3. Control and Performance Evaluation of Multiphase FSPM Motor in Low-Speed Region for Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Feng Yu

    2015-09-01

    Full Text Available The flux-switching permanent-magnet (FSPM motor has been viewed as a highly reliable machine with both armature windings and magnets on the stator. Owing to the high torque-production capability with low torque ripple, FSPM motors with a higher number of phases are potential candidates for traction applications in hybrid electric vehicles (HEVs. However, existing research has mostly focused on the principles and static performance of multiphase FSPM motors, and little attention has been paid to advanced control strategies. In this paper, the fully decoupled current control of a 36/34-pole nine-phase FSPM (NP-FSPM motor is developed and the performance under different operating conditions is investigated. The aim of the design is to alleviate cross coupling effects and unwanted low-order stator harmonic currents, to guarantee fast transient response and small steady-state error. In addition, its fault-tolerance is further elaborated. These features are very important in automotive applications where low torque pulsation, high fault-tolerant capability and high dynamic performance are of major importance. Firstly, the research status of multiphase FSPM motors is briefly reviewed. Secondly, the mathematical model in the dq reference frames and control strategies are presented. Then, the control and performance of the NP-FSPM motor are evaluated by using MATLAB/Simulink. Finally, experiments on an NP-FSPM motor prototype are carried out to validate the study.

  4. 热处理温度对空心复相陶瓷微珠结构与微波电磁性能的影响%Effect of Heat-treatment Temperature on Structure and Microwave Electromagnetic Properties of Hollow Multiphase Ceramic Microspheres

    Institute of Scientific and Technical Information of China (English)

    蔡旭东; 王建江; 许宝才; 娄鸿飞; 侯永伸

    2013-01-01

    The precursor of the hollow multiphase ceramic microspheres were obtained by a self-reactive quenching process based on the flame hot spraying technology, the self-propagating high-temperature synthesis (SHS) technology and the quick chilling technol-ogy. The microwave absorbing materials of the hollow microspheres containing barium ferrites were subsequently prepared after heat-treatment. Effect of heat-treatment temperature (i.e., 600, 850, 1 100℃) on the morphology, the phase structure, the relative content of the phases and the microwave absorption properties of the hollow microspheres was investigated. The results show that the grain size on the surface of the hollow microspheres increases gradually with the increase of heat-treatment temperature. The spheres are constituted by crystals for hexagonal like platelet with the sub-micron sizes when heat-treatment temperature is 1 100℃.The con-tent of main phases of BaFe12O19 and the by-products of BaAl12O19 increase with increasing heat-treatment temperature. In addition, the real part (ε′) and the imaginary part (ε′) of the complex dielectric constant decrease, and the real part (μ′) and the imaginary part (μ′) of the complex magnetic permeability increase in certain frequency bands. Moreover, the microwave absorption properties in-crease. The minimum reflectivity is-19.5 dB, the frequency band of<10 dB is 8.7-10 GHz and 15-17.3 GHz and the band width is 3.6 GHz at 1 100℃, which are better than those at 600 and 850℃.%利用将火焰热喷涂技术、自蔓延高温合成技术及快速冷却凝固技术结合在一起的自反应淬熄法制备了前驱体空心复相陶瓷微珠,然后通过热处理获得了钡铁氧体空心复相陶瓷微珠吸波材料,研究不同热处理温度(600、850、1100℃)对其形貌、相结构、相的相对含量与微波电磁性能的影响。结果表明:随着热处理温度的升高,空心微珠的表面出现晶粒并逐渐

  5. Application of Wavelets Transform to Analysis of Multiphase Flow%小波分析技术在多相流系统中的应用

    Institute of Scientific and Technical Information of China (English)

    冀海峰; 黄志尧; 吴贤国; 王保良; 李海青

    2001-01-01

    A method of analysis of multiphase flow using wavelets transform for identifying the flow regimes was proposed.After the wavelet decomposition of the multiphase flow signal,the eigenvalue of different scales were calculated and were used to analyze the multiphase flow system.Methods for obtaining eigenvalue of gas-liquid two phase flow or gas-solid fluidized bed were developed.The results showed that the method was effective for identification of the regime of gas-liquid two phase flow and the transformation of gas-solid fluidized bed from fixed bed to fluidized bed.%提出了一种将小波分析技术应用于多相流系统进行流型判别的方法。对采集的多相流信号进行小波分解,在不同尺度上提取特征值,并提出了两种特征值参数的提取方法,分别应用于气液两相流和气固流化床系统中,进行流型的辨识。试验结果表明利用所提出的特征值可以有效地对气液两相流流型以及气固流化床从固定床向鼓泡床的转变进行判别。

  6. POROSITY AND BAND-STRENGTH MEASUREMENTS OF MULTI-PHASE COMPOSITE ICES

    Energy Technology Data Exchange (ETDEWEB)

    Bossa, Jean-Baptiste; Fransen, Coen; Cazaux, Stéphanie; Linnartz, Harold [Sackler Laboratory for Astrophysics, Leiden Observatory, Leiden University, P.O. Box 9513, NL-2300 RA Leiden (Netherlands); Maté, Belén; Ortigoso, Juan [Instituto de Estructura de la Materia, IEM-CSIC, Serrano 123, E-28006 Madrid (Spain); Pilling, Sergio; Rocha, Will Robson Monteiro [Instituto de Pesquisa and Desenvolvimento, Universidade do Vale do Paraiba, São José dos Campos, SP 12244000 (Brazil)

    2015-11-20

    We use experimental mid-infrared optical constants and extended effective medium approximations to determine the porosity and the band strengths of multi-phase composite ices grown at 30 K. A set of porous H{sub 2}O:CH{sub 4} ices are taken as a prototypical example. As a benchmark and proof of concept, the stoichiometry of the ice constituents is retreived with good accuracy from the refractive indices and the extinction coefficients of the reference binary ice mixtures with known compositions. Accurate band strengths are then calculated from experimental mid-infrared spectra of complex ices. We notice that the presence of pores has only a small effect on the overall band strengths, whereas a water dilution can considerably alter them. Different levels of porosity are observed depending on the abundance of methane used as a gas contaminant premixed with water prior to background deposition. The absorption profiles are also found to vary with deposition rate. To explain this, we use Monte Carlo simulations and we observe that the deposition rate strongly affects the pore size distribution as well as the ice morphology through reorganization processes. Extrapolated to genuine interstellar ices, the methodology presented in this paper can be used to evaluate the porosity and to quantify the relative abundances from observational data.

  7. Thermal transport properties of multiphase sintered metals microstructures. The copper-tungsten system: Experiments and modeling

    Science.gov (United States)

    Gheribi, Aïmen E.; Autissier, Emmanuel; Gardarein, Jean-Laurent; Richou, Marianne

    2016-04-01

    The thermal diffusivity of Cu-W sintered alloys microstructures is measured at room temperature at different compositions, using rear face flash experiments. The samples are synthesized with the Spark Plasma Sintering technique. The resulting microstructures are slightly porous and consist of angular nanoscale grains of tungsten with medium sphericity in a copper matrix. The tungsten particles are at the nanoscale with an average grain size of 250 nm in contrast to the copper matrix for which the average grain size lies in the range 20 μm-30 μm; this is large enough to avoid the grains boundary effect upon the thermal transport. The overall porosity of the microstructures lies within the range: 6 %≤P ≤12 % . Along with the experimental work, a predictive model describing the effective thermal conductivity of multiphasic macrostructures is proposed in order to explain the obtained experimental results. The model was developed based only on physical considerations and contains no empirical parameters; it takes into account the type of microstructure and the microstructure parameters: porosity, grain shape, grain size, and grain size distribution. The agreement between the experiments and the model is found to be excellent.

  8. X-ray visualisation and dissolved gas quantification: multiphase flow research and development at NEL

    Energy Technology Data Exchange (ETDEWEB)

    Hall, Andrew R.W.; Corlett, Anne E.

    1997-07-01

    NEL is actively investigating new techniques for the measurement of multiphase flows. This paper describes two such investigations, an X-ray system to visualise three-phase flows and a manometric/volumetric system to quantify the dissolved gas content of oil/gas flows. The X-ray system was used in both horizontal and vertical flows, covering slug, annular and bubble flow regimes. Also covered were stratified (horizontal only) and churn (vertical only) flows. The system was able to provide visualisation of features not visible in flows with low water cut (due to poor light transmission through oil) and therefore increased the understanding of three-phase flow behaviour. Quantifying the amount of dissolved gas within a hydrocarbon oil is of importance to the oil industry due to the problems associated with the artificial decrease in density of a gas filled oil and the effects of gas breakout. The present study found that the gas uptake by the oil was highly dependent on the following factors; volumetric gas fraction, line pressure and liquid flowrate. The underlying water cut of the oil also appeared to have an effect. (author)

  9. Multiphase flow dynamics and control; Dynamique et controle des ecoulements polyphasiques

    Energy Technology Data Exchange (ETDEWEB)

    Duret, E.

    2005-02-01

    Production in the petroleum industry requires a better knowledge of multiphase flow, as the design of pipelines may cause the flow to become strongly unstable. For instance, for low flow rates and when a sea line ends at a riser, the riser base may accumulate liquid and stop the flow of gas. Then, the upstream gas is compressed until its pressure is large enough to push the liquid slug downstream. Under such conditions, a cyclic process occurs which is called severe slugging, generating large and fast fluctuations in pressure and flow rates. This thesis is devoted to two methods to stabilize this undesirable phenomenon. Using the pipeline's ability to separate phases to pick-up the gas upstream the riser base, they are mainly based on the perturbation theory (fast proportional effect, slow integral effect). The first one uses a secondary riser to transport the gas to the surface facilities. A stability study worked out with the phase diagrams technique shows that it is a good method to control this phenomenon. However, it imposes a high pressure in all the system. Thus, the second controller re-injects the gas at a determined height in the riser to decrease the hydrostatic pressure. A first stability study in open loop give a criterion on the minimal reinjection height. Then, the controller is developed by using the two-time scale control techniques. Finally, let us denote that these two controllers have been validated with a small size experimental set up. (author)

  10. Finite Element Methods and Multiphase Continuum Theory for Modeling 3D Air-Water-Sediment Interactions

    Science.gov (United States)

    Kees, C. E.; Miller, C. T.; Dimakopoulos, A.; Farthing, M.

    2016-12-01

    The last decade has seen an expansion in the development and application of 3D free surface flow models in the context of environmental simulation. These models are based primarily on the combination of effective algorithms, namely level set and volume-of-fluid methods, with high-performance, parallel computing. These models are still computationally expensive and suitable primarily when high-fidelity modeling near structures is required. While most research on algorithms and implementations has been conducted in the context of finite volume methods, recent work has extended a class of level set schemes to finite element methods on unstructured methods. This work considers models of three-phase flow in domains containing air, water, and granular phases. These multi-phase continuum mechanical formulations show great promise for applications such as analysis of coastal and riverine structures. This work will consider formulations proposed in the literature over the last decade as well as new formulations derived using the thermodynamically constrained averaging theory, an approach to deriving and closing macroscale continuum models for multi-phase and multi-component processes. The target applications require the ability to simulate wave breaking and structure over-topping, particularly fully three-dimensional, non-hydrostatic flows that drive these phenomena. A conservative level set scheme suitable for higher-order finite element methods is used to describe the air/water phase interaction. The interaction of these air/water flows with granular materials, such as sand and rubble, must also be modeled. The range of granular media dynamics targeted including flow and wave transmision through the solid media as well as erosion and deposition of granular media and moving bed dynamics. For the granular phase we consider volume- and time-averaged continuum mechanical formulations that are discretized with the finite element method and coupled to the underlying air

  11. A semi-analytic model of the turbulent multi-phase interstellar medium

    Science.gov (United States)

    Braun, H.; Schmidt, W.

    2012-04-01

    We present a semi-analytic model for the interstellar medium that considers local processes and structures of turbulent star-forming gas. A volume element of the interstellar medium is described as a multi-phase system, comprising a cold and a warm gas phase in effective (thermal plus turbulent) pressure equilibrium and a stellar component. The cooling instability of the warm gas feeds the cold phase, while various heating processes transfer cold gas to the warm phase. The cold phase consists of clumps embedded in diffuse warm gas, where only the molecular fraction of the cold gas may be converted into stars. The fraction of molecular gas is approximately calculated, using a Strömgren-like approach and the efficiency of star formation is determined by the state of the cold gas and the turbulent velocity dispersion on the clump length-scale. Gas can be heated by supernovae and ultraviolet emission of massive stars, according to the evolutionary stages of the stellar populations and the initial mass function. Since turbulence has a critical impact on the shape of the gaseous phases, on the production of molecular hydrogen and on the formation of stars, the consistent treatment of turbulent energy - the kinetic energy of unresolved motions - is an important new feature of our model. Besides turbulence production by supernovae and the cooling instability, we also take into account the forcing by large-scale motions. We formulate a set of ordinary differential equations, which statistically describes star formation and the exchange between the different budgets of mass and energy in a region of the interstellar medium with given mean density, size, metallicity and external turbulence forcing. By exploring the behaviour of the solutions, we find equilibrium states, in which the star formation efficiencies are consistent with observations. Kennicutt-Schmidt-like relations naturally arise from the equilibrium solutions, while conventional star formation models in

  12. Scaling Relations for Viscous and Gravitational Flow Instabilities in Multiphase Multicomponent Compressible Flow

    Science.gov (United States)

    Moortgat, J.; Amooie, M. A.; Soltanian, M. R.

    2016-12-01

    Problems in hydrogeology and hydrocarbon reservoirs generally involve the transport of solutes in a single solvent phase (e.g., contaminants or dissolved injection gas), or the flow of multiple phases that may or may not exchange mass (e.g., brine, NAPL, oil, gas). Often, flow is viscously and gravitationally unstable due to mobility and density contrasts within a phase or between phases. Such instabilities have been studied in detail for single-phase incompressible fluids and for two-phase immiscible flow, but to a lesser extent for multiphase multicomponent compressible flow. The latter is the subject of this presentation. Robust phase stability analyses and phase split calculations, based on equations of state, determine the mass exchange between phases and the resulting phase behavior, i.e., phase densities, viscosities, and volumes. Higher-order finite element methods and fine grids are used to capture the small-scale onset of flow instabilities. A full matrix of composition dependent coefficients is considered for each Fickian diffusive phase flux. Formation heterogeneity can have a profound impact and is represented by realistic geostatistical models. Qualitatively, fingering in multiphase compositional flow is different from single-phase problems because 1) phase mobilities depend on rock wettability through relative permeabilities, and 2) the initial density and viscosity ratios between phases may change due to species transfer. To quantify mixing rates in different flow regimes and for varying degrees of miscibility and medium heterogeneities, we define the spatial variance, scalar dissipation rate, dilution index, skewness, and kurtosis of the molar density of introduced species. Molar densities, unlike compositions, include compressibility effects. The temporal evolution of these measures shows that, while transport at the small-scale (cm) is described by the classical advection-diffusion-dispersion relations, scaling at the macro-scale (> 10 m) shows

  13. PREFACE: The 6th International Symposium on Measurement Techniques for Multiphase Flows

    Science.gov (United States)

    Okamoto, Koji; Murai, Yuichi

    2009-02-01

    Research on multi-phase flows is very important for industrial applications, including power stations, vehicles, engines, food processing, and so on. Also, from the environmental viewpoint, multi-phase flows need to be investigated to overcome global warming. Multi-phase flows originally have non-linear features because they are multi-phased. The interaction between the phases plays a very interesting role in the flows. The non-linear interaction causes the multi-phase flows to be very difficult to understand phenomena. The International Symposium on Measurement Techniques for Multi-phase Flows (ISMTMF) is a unique symposium. The target of the symposium is to exchange the state-of-the-art knowledge on the measurement techniques for non-linear multi-phase flows. Measurement technique is the key technology to understanding non-linear phenomena. The ISMTMF began in 1995 in Nanjing, China. The symposium has continuously been held every two or three years. The ISMTMF-2008 was held in Okinawa, Japan as the 6th symposium of ISMTMF on 15-17 December 2008. Okinawa has a long history as the Ryukyus Kingdom. China and Japan have had cultural and economic exchanges through Okinawa for more than 1000 years. Please enjoy Okinawa and experience its history to enhance our international communication. The present symposium was attended by 124 participants, the program included 107 contributions with 5 plenary lectures, 2 keynote lectures, and 100 oral regular paper presentations. The topics include, besides the ordinary measurement techniques for multiphase flows, acoustic and electric sensors, bubbles and microbubbles, computed tomography, gas-liquid interface, laser-imaging and PIV, oil/coal/drop and spray, solid and powder, spectral and multi-physics. This volume includes the presented papers at ISMTMF-2008. In addition to this volume, ten selected papers will be published in a special issue of Measurement Science and Technology. We would like to express special thanks to all

  14. Multiphasic strain differentiation of atypical mycobacteria from elephant trunk wash

    Directory of Open Access Journals (Sweden)

    Kok-Gan Chan

    2015-11-01

    Full Text Available Background. Two non-tuberculous mycobacterial strains, UM_3 and UM_11, were isolated from the trunk wash of captive elephants in Malaysia. As they appeared to be identical phenotypes, they were investigated further by conventional and whole genome sequence-based methods of strain differentiation.Methods. Multiphasic investigations on the isolates included species identification with hsp65 PCR-sequencing, conventional biochemical tests, rapid biochemical profiling using API strips and the Biolog Phenotype Microarray analysis, protein profiling with liquid chromatography-mass spectrometry, repetitive sequence-based PCR typing and whole genome sequencing followed by phylogenomic analyses.Results. The isolates were shown to be possibly novel slow-growing schotochromogens with highly similar biological and genotypic characteristics. Both strains have a genome size of 5.2 Mbp, G+C content of 68.8%, one rRNA operon and 52 tRNAs each. They qualified for classification into the same species with their average nucleotide identity of 99.98% and tetranucleotide correlation coefficient of 0.99999. At the subspecies level, both strains showed 98.8% band similarity in the Diversilab automated repetitive sequence-based PCR typing system, 96.2% similarity in protein profiles obtained by liquid chromatography mass spectrometry, and a genomic distance that is close to zero in the phylogenomic tree constructed with conserved orthologs. Detailed epidemiological tracking revealed that the elephants shared a common habitat eight years apart, thus, strengthening the possibility of a clonal relationship between the two strains.

  15. Multiphase modelling of vascular tumour growth in two spatial dimensions

    KAUST Repository

    Hubbard, M.E.

    2013-01-01

    In this paper we present a continuum mathematical model of vascular tumour growth which is based on a multiphase framework in which the tissue is decomposed into four distinct phases and the principles of conservation of mass and momentum are applied to the normal/healthy cells, tumour cells, blood vessels and extracellular material. The inclusion of a diffusible nutrient, supplied by the blood vessels, allows the vasculature to have a nonlocal influence on the other phases. Two-dimensional computational simulations are carried out on unstructured, triangular meshes to allow a natural treatment of irregular geometries, and the tumour boundary is captured as a diffuse interface on this mesh, thereby obviating the need to explicitly track the (potentially highly irregular and ill-defined) tumour boundary. A hybrid finite volume/finite element algorithm is used to discretise the continuum model: the application of a conservative, upwind, finite volume scheme to the hyperbolic mass balance equations and a finite element scheme with a stable element pair to the generalised Stokes equations derived from momentum balance, leads to a robust algorithm which does not use any form of artificial stabilisation. The use of a matrix-free Newton iteration with a finite element scheme for the nutrient reaction-diffusion equations allows full nonlinearity in the source terms of the mathematical model.Numerical simulations reveal that this four-phase model reproduces the characteristic pattern of tumour growth in which a necrotic core forms behind an expanding rim of well-vascularised proliferating tumour cells. The simulations consistently predict linear tumour growth rates. The dependence of both the speed with which the tumour grows and the irregularity of the invading tumour front on the model parameters is investigated. © 2012 Elsevier Ltd.

  16. Multiphase hydrodechlorination of polychlorinated aromatics - Towards scale-up.

    Science.gov (United States)

    Perosa, Alvise; Selva, Maurizio; Maschmeyer, Thomas

    2017-04-01

    We describe a chemical technology for the reductive catalytic multiphase hydrodechlorination (HDC) of chlorinated aromatics to greatly reduce their toxicity and aid the disposal of such species. The system requires no solvent and the catalyst displays a high recycling efficiency. In the present case, 1,3-dichlorobenzene (1,3-DCB) was used as a model compound, and was quantitatively hydrodechlorinated to benzene with hydrogen, in a tri-phasic liquid system consisting of the chlorinated aromatic itself as the top organic phase, an aqueous sodium hydroxide bottom phase (that neutralises acids formed), and an Aliquat(®)336 (A336) intermediate phase containing a Pd/C catalyst. Once the reaction was complete the top phase (now just benzene) and the bottom phase (now principally aqueous NaCl) were removed and the remaining catalytic A336/(Pd/C) phase recycled. This model study was conducted on a multi-gram scale with a view of demonstrating its applicability to the detoxification of PCBs. Comparison of the Mass Intensity (MI) and turnover frequency (TOF) of our model reaction with three examples of published procedures for the HDC of DCB, indicated that the MI for our system (MI = 6.33) was lower by an order of magnitude or more than that of the others (MI = 27.9, 64.6, 96016), and that TOFs were comparable. A preliminary cost analysis indicates approximately 2000 €/tonne to treat tonne-scale amounts of chlorinated aromatics, making the system in principle useful for industrial implementation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Multi-phase volcanic resurfacing at Loki Patera on Io

    Science.gov (United States)

    de Kleer, K.; Skrutskie, M.; Leisenring, J.; Davies, A. G.; Conrad, A.; de Pater, I.; Resnick, A.; Bailey, V.; Defrère, D.; Hinz, P.; Skemer, A.; Spalding, E.; Vaz, A.; Veillet, C.; Woodward, C. E.

    2017-05-01

    The Jovian moon Io hosts the most powerful persistently active volcano in the Solar System, Loki Patera. The interior of this volcanic, caldera-like feature is composed of a warm, dark floor covering 21,500 square kilometres surrounding a much cooler central ‘island’. The temperature gradient seen across areas of the patera indicates a systematic resurfacing process, which has been seen to occur typically every one to three years since the 1980s. Analysis of past data has indicated that the resurfacing progressed around the patera in an anti-clockwise direction at a rate of one to two kilometres per day, and that it is caused either by episodic eruptions that emplace voluminous lava flows or by a cyclically overturning lava lake contained within the patera. However, spacecraft and telescope observations have been unable to map the emission from the entire patera floor at sufficient spatial resolution to establish the physical processes at play. Here we report temperature and lava cooling age maps of the entire patera floor at a spatial sampling of about two kilometres, derived from ground-based interferometric imaging of thermal emission from Loki Patera obtained on 8 March 2015 UT as the limb of Europa occulted Io. Our results indicate that Loki Patera is resurfaced by a multi-phase process in which two waves propagate and converge around the central island. The different velocities and start times of the waves indicate a non-uniformity in the lava gas content and/or crust bulk density across the patera.

  18. Modeling Dust Evolution in Galaxies with a Multiphase, Inhomogeneous ISM

    Science.gov (United States)

    Zhukovska, Svitlana; Dobbs, Clare; Jenkins, Edward B.; Klessen, Ralf S.

    2016-11-01

    We develop a model of dust evolution in a multiphase, inhomogeneous interstellar medium (ISM) using hydrodynamical simulations of giant molecular clouds in a Milky Way-like spiral galaxy. We improve the treatment of dust growth by accretion in the ISM to investigate the role of the temperature-dependent sticking coefficient and ion-grain interactions. From detailed observational data on the gas-phase Si abundances [{{Si}}{gas}/{{H}}] measured in the local Galaxy, we derive a relation between the average [{{Si}}{gas}/{{H}}] and the local gas density n({{H}}) that we use as a critical constraint for the models. This relation requires a sticking coefficient that decreases with the gas temperature. The relation predicted by the models reproduces the slope of -0.5 for the observed relation in cold clouds, which is steeper than that for the warm medium and is explained by dust growth. We find that growth occurs in the cold medium for all adopted values of the minimum grain size a min from 1 to 5 nm. For the classical cutoff of {a}\\min =5 {nm}, the Coulomb repulsion results in slower accretion and higher [{{Si}}{gas}/{{H}}] than the observed values. For {a}\\min ≲ 3 {nm}, the Coulomb interactions enhance the growth rate, steepen the slope of the [{{Si}}{gas}/{{H}}]-n({{H}}) relation, and provide a better match to observations. The rates of dust re-formation in the ISM by far exceed the rates of dust production by stellar sources. After the initial 140 Myr, the cycle of matter in and out of dust reaches a steady state, in which the dust growth balances the destruction on a similar timescale of 350 Myr.

  19. An origin for multiphase gas in galactic winds and haloes

    Science.gov (United States)

    Thompson, Todd A.; Quataert, Eliot; Zhang, Dong; Weinberg, David H.

    2016-01-01

    The physical origin of high-velocity cool gas seen in galactic winds remains unknown. Following work by B. Wang, we argue that radiative cooling in initially hot thermally-driven outflows can produce fast neutral atomic and photoionized cool gas. The inevitability of adiabatic cooling from the flow's initial 107-108 K temperature and the shape of the cooling function for T ≲ 107 K imply that outflows with hot gas mass-loss rate relative to star formation rate of β =dot{M}_hot/dot{M}_star ≳ 0.5 cool radiatively on scales ranging from the size of the energy injection region to tens of kpc. We highlight the β and star formation rate surface density dependence of the column density, emission measure, radiative efficiency, and velocity. At rcool, the gas produces X-ray and then UV/optical line emission with a total power bounded by ˜10-2 L⋆ if the flow is powered by steady-state star formation with luminosity L⋆. The wind is thermally unstable at rcool, potentially leading to a multiphase medium. Cooled winds decelerate significantly in the extended gravitational potential of galaxies. The cool gas precipitated from hot outflows may explain its prevalence in galactic haloes. We forward a picture of winds whereby cool clouds are initially accelerated by the ram pressure of the hot flow, but are rapidly shredded by hydrodynamical instabilities, thereby increasing β, seeding radiative and thermal instability, and cool gas rebirth. If the cooled wind shocks as it sweeps up the circumgalactic medium, its cooling time is short, thus depositing cool gas far out into the halo. Finally, conduction can dominate energy transport in low-β hot winds, leading to flatter temperature profiles than otherwise expected, potentially consistent with X-ray observations of some starbursts.

  20. Damage characterization of high-strength multiphase steels

    Science.gov (United States)

    Heibel, S.; Nester, W.; Clausmeyer, T.; Tekkaya, A. E.

    2016-11-01

    High-strength steels show an entirely different material behavior than conventional deep-drawing steels. This fact is caused among others by the multiphase nature of their structure. The Forming Limit Diagram as the classic failure criterion in forming simulation is only partially suitable for this class of steels. An improvement of the failure prediction can be obtained by using damage mechanics. Therefore, an exact knowledge of the material-specific damage is essential for the application of various damage models. In this paper the results of microstructure analysis of a dual-phase steel and a complex-phase steel with a tensile strength of 1000 MPa are shown comparatively at various stress conditions. The objective is to characterize the basic damage mechanisms and based on this to assess the crack sensitivity of both steels. First a structural analysis with regard to non-metallic inclusions, the microstructural morphology, phase identification and the difference in microhardness between the structural phases is carried out. Subsequently, the development of the microstructure at different stress states between uniaxial and biaxial tension is examined. The damage behavior is characterized and quantified by the increase in void density, void size and the quantity of voids. The dominant damage mechanism of the dual-phase steel is the void initiation at phase boundaries, within harder structural phases and at inclusions. In contrast the complex-phase steel shows a significant growth of a smaller amount of voids which initiate only at inclusions. To quantify the damage tolerance and the susceptibility of cracking the criterion of the fracture forming limit line (FFL) is used. The respective statements are supported by results of investigations regarding the edge-crack sensitivity.

  1. DESIGN AND DEVELOPMENT OF INTEGRATED COMPACT MULTIPHASE SEPARATION SYSTEM (CMSS)

    Energy Technology Data Exchange (ETDEWEB)

    Ram S. Mohan; Ovadia Shoham

    2004-12-31

    The petroleum industry has relied in the past mainly on conventional vessel-type separators, which are bulky, heavy and expensive, to process wellhead production of oil-water-gas flow. Economic and operational pressures continue to force the petroleum industry to seek less expensive and more efficient separation alternatives in the form of compact separators. The compact dimensions, smaller footprint and lower weight of compact separators have a potential for cost savings to the industry, especially in offshore and subsea applications. Also, compact separators reduce the inventory of hydrocarbons significantly, which is critical for environmental and safety considerations. This report presents a brief overview of the activities and tasks accomplished during the part July 09, 2003--October 08, 2004, related to the Budget Period I (July 09, 2003--October 08, 2004) of the DOE project titled ''Design and Development of Integrated Compact Multiphase Separation System (CMSS{copyright})''. An executive summary is presented initially followed by the tasks of the current budget period. Then, detailed description of the experimental and modeling investigations are presented. Subsequently, the technical and scientific results of the activities of this project period are presented with discussions. The findings of this investigation are summarized in the ''Conclusions'' section followed by relevant references. The initial phase of the project (Budget Period I--07/09/2003 to 10/08/2004) focuses on the development of additional individual compact separation components, such as the horizontal pipe separator (HPS{copyright}), for obtaining clean oil stream from oil-water mixture, flow conditioning components, such as the helical pipe (HP) and slug damper (SD{copyright}), for dissipating slugs upstream of the compact separators. The project will also design and test an upstream slug generator (SG).

  2. Novel Hierarchical Fall Detection Algorithm Using a Multiphase Fall Model

    Science.gov (United States)

    Hsieh, Chia-Yeh; Liu, Kai-Chun; Huang, Chih-Ning; Chu, Woei-Chyn; Chan, Chia-Tai

    2017-01-01

    Falls are the primary cause of accidents for the elderly in the living environment. Reducing hazards in the living environment and performing exercises for training balance and muscles are the common strategies for fall prevention. However, falls cannot be avoided completely; fall detection provides an alarm that can decrease injuries or death caused by the lack of rescue. The automatic fall detection system has opportunities to provide real-time emergency alarms for improving the safety and quality of home healthcare services. Two common technical challenges are also tackled in order to provide a reliable fall detection algorithm, including variability and ambiguity. We propose a novel hierarchical fall detection algorithm involving threshold-based and knowledge-based approaches to detect a fall event. The threshold-based approach efficiently supports the detection and identification of fall events from continuous sensor data. A multiphase fall model is utilized, including free fall, impact, and rest phases for the knowledge-based approach, which identifies fall events and has the potential to deal with the aforementioned technical challenges of a fall detection system. Seven kinds of falls and seven types of daily activities arranged in an experiment are used to explore the performance of the proposed fall detection algorithm. The overall performances of the sensitivity, specificity, precision, and accuracy using a knowledge-based algorithm are 99.79%, 98.74%, 99.05% and 99.33%, respectively. The results show that the proposed novel hierarchical fall detection algorithm can cope with the variability and ambiguity of the technical challenges and fulfill the reliability, adaptability, and flexibility requirements of an automatic fall detection system with respect to the individual differences. PMID:28208694

  3. In situ imaging of multiphase bio-interfaces at the micro-/nanoscale.

    Science.gov (United States)

    Chen, Peipei; Jiang, Lei; Han, Dong

    2011-10-17

    The multiphase bio-interfacial system constituted by biological surfaces and their surrounding environment is usually considered to be an essential clue for exploring the mysterious relationship between surface architecture and function. As a visualizing method to understand these systems, in situ imaging of multiphase interfaces (e.g., air/liquid/solid and oil/water/solid systems) at the micro-/nanoscale, still remains a huge challenge, as a result of their heterogeneity and complexity. Here, recent progress on real-space micro-/nanoscale imaging of multiphase bio-interfacial systems is reviewed; this includes several techniques and imaging results on bio-interfaces, such as the lotus leaf, fish scale, living cell's surface, and fresh tissue surface. The results evidently show that interfacial structures have a significant impact on the state of the microscopic multiphase interface, further influencing specific functions. Based on this research, technical innovations, some more complicated multiphase interface systems, and structure-function coupling mechanism are proposed.

  4. Prediction of Separation Length of Turbulent Multiphase Flow Using Radiotracer and Computational Fluid Dynamics Simulation

    Directory of Open Access Journals (Sweden)

    S. Sugiharto1

    2013-04-01

    Full Text Available Multiphase flow modeling presents great challenges due to its extreme importance in various industrial and environmental applications. In the present study, prediction of separation length of multiphase flow is examined experimentally by injection of two kinds of iodine-based radiotracer solutions into a hydrocarbon transport pipeline (HCT having an inner diameter of 24 in (60,96 m. The main components of fluids in the pipeline are water 95%, crude oil 3% and gas 2%. A radiotracing experiment was carried out at the segment of pipe which is located far from branch points with assumptions that stratified flows in such segment were achieved. Two radiation detectors located at 80 and 100 m from injection point were used to generate residence time distribution (RTD curve resulting from injection of radiotracer solutions. Multiphase computational fluid dynamics (CFD simulations using Eulerian-Eulerian control volume and commercial CFD package Fluent 6.2 were employed to simulate separation length of multiphase flow. The results of study shows that the flow velocity of water is higher than the flow rate of crude oil in water-dominated system despite the higher density of water than the density of the crude oil. The separation length in multiphase flow predicted by Fluent mixture model is approximately 20 m, measured from injection point. This result confirms that the placement of the first radiation detector at the distance 80 m from the injection point was correct

  5. The impact of reservoir conditions and rock heterogeneity on multiphase flow in CO2-brine-sandstone systems

    Science.gov (United States)

    Krevor, S. C.; Reynolds, C. A.; Al-Menhali, A.; Niu, B.

    2015-12-01

    Capillary strength and multiphase flow are key for modeling CO2 injection for CO2 storage. Past observations of multiphase flow in this system have raised important questions about the impact of reservoir conditions on flow through effects on wettability, interfacial tension and fluid-fluid mass transfer. In this work we report the results of an investigation aimed at resolving many of these outstanding questions for flow in sandstone rocks. The drainage capillary pressure, drainage and imbibition relative permeability, and residual trapping [1] characteristic curves have been characterized in Bentheimer and Berea sandstone rocks across a pressure range 5 - 20 MPa, temperatures 25 - 90 C and brine salinities 0-5M NaCl. Over 30 reservoir condition core flood tests were performed using techniques including the steady state relative permeability test, the semi-dynamic capillary pressure test, and a new test for the construction of the residual trapping initial-residual curve. Test conditions were designed to isolate effects of interfacial tension, viscosity ratio, density ratio, and salinity. The results of the tests show that, in the absence of rock heterogeneity, reservoir conditions have little impact on flow properties, consistent with continuum scale multiphase flow theory for water wet systems. The invariance of the properties is observed, including transitions of the CO2 from a gas to a liquid to a supercritical fluid, and in comparison with N2-brine systems. Variations in capillary pressure curves are well explained by corresponding changes in IFT although some variation may reflect small changes in wetting properties. The low viscosity of CO2at certain conditions results in sensitivity to rock heterogeneity. We show that (1) heterogeneity is the likely source of uncertainty around past relative permeability observations and (2) that appropriate scaling of the flow potential by a quantification of capillary heterogeneity allows for the selection of core flood

  6. Direct numerical simulation of a compressible multiphase flow through the fast Eulerian approach

    CERN Document Server

    Cerminara, Matteo; Ongaro, Tomaso Esposti; Salvetti, Maria Vittoria

    2014-01-01

    Our work is motivated by the analysis of ash plume dynamics, arising in the study of volcanic eruptions. Such phenomena are characterized by large Reynolds number (exceeding $10^7$) and a large number of polydispersed particles~[1]. Thus, the choice of the methodology to be used is straightforward: we need LES of a multiphase gas-particles flow. Since the simulation of the behavior of a large number of dispersed particles is very difficult with Lagrangian methods, we model the particles as a continuum, Eulerian fluid (dust), by using reduced models involving two fluids, as proposed in Ref.~[2,3,4]. Moreover, we need a robust numerical scheme to simultaneously treat compressibility, buoyancy effects and turbulent dispersal dynamics. We analyze the turbulence properties of such models in a homogeneous and isotropic setting, with the aim of formulating a LES model. In particular, we examine the development of freely decaying homogeneous and isotropic turbulence in subsonic regime (the r.m.s. Mach number either 0...

  7. Minnesota Multiphasic Personality Inventory-2-Restructured Form (MMPI-2-RF) predictors of police officer problem behavior.

    Science.gov (United States)

    Tarescavage, Anthony M; Corey, David M; Ben-Porath, Yossef S

    2015-02-01

    The purpose of this study was to investigate the predictive validity of the Minnesota Multiphasic Personality Inventory-2-Restructured Form (MMPI-2-RF) in a sample of law enforcement officers. MMPI-2-RF scores were collected from preemployment psychological evaluations of 136 male police officers, and supervisor ratings of performance and problem behavior were subsequently obtained during the initial probationary period. The sample produced meaningfully lower and less variant substantive scale scores than the general population and the MMPI-2-RF Police Candidate comparison group, which significantly affected effect sizes for the zero-order correlations. After applying a correction for range restriction, MMPI-2-RF substantive scales demonstrated moderate to strong associations with criteria, particularly in the Emotional Dysfunction and Interpersonal Functioning domains. Relative risk ratio analyses showed that cutoffs of 45T and 50T maintained reasonable selection ratios because of the exceptionally low scores in this sample and were associated with significantly increased risk for problematic behavior. These results provide support for the predictive validity of the MMPI-2-RF substantive scales in this setting. Implications of these findings and limitations of these results are discussed. © The Author(s) 2014.

  8. A Multiphase Approach to the Modeling of Porous Media Contamination by Organic Compounds: 1. Equation Development

    Science.gov (United States)

    Abriola, Linda M.; Pinder, George F.

    1985-01-01

    A multiphase approach to the modeling of aquifer contamination by organic compounds is developed. This approach makes it possible to describe the simultaneous transport of a chemical contaminant in three physical forms: as a nonaqueous phase, as a soluble component of an aqueous phase, and as a mobile fraction of a gas phase. The contaminant may be composed of, at most, two distinct components, one of which may be volatile and slightly water soluble and the other of which is both nonvolatile and insoluble in water. Equations which describe this complex system are derived from basic conservation of mass principles by the application of volume averaging techniques and the incorporation of various constitutive relations and approximations. Effects of matrix and fluid compressibilities, gravity, phase composition, interphase mass exchange, capillarity, diffusion, and dispersion are all considered. The resulting mathematical model consists of a system of three nonlinear partial differential equations subject to two equilibrium constraints. These equations relate five unknowns: two capillary pressures and three mass fractions.

  9. Deformation behavior of a high strength multiphase steel at macro- and micro-scales

    Energy Technology Data Exchange (ETDEWEB)

    Diego-Calderón, I. de, E-mail: irenedediego.calderon@imdea.org [IMDEA Materials Institute, Calle Eric Kandel 2, Getafe 28906, Madrid (Spain); Santofimia, M.J. [Department of Materials Science and Engineering, Delft University of Technology, 2628 CD Delft (Netherlands); Molina-Aldareguia, J.M.; Monclús, M.A.; Sabirov, I. [IMDEA Materials Institute, Calle Eric Kandel 2, Getafe 28906, Madrid (Spain)

    2014-08-12

    Advanced high strength steels via quenching and partitioning (Q and P) process are a mainstream trend in modern steel research. This work contributes to a better understanding of their local mechanical properties and local deformation behavior at the micro-scale in relation to their local microstructure. A low alloyed steel was subjected to Q and P heat treatments leading to the formation of complex multiphase microstructures. Nanoindentation tests were performed to measure nanohardness of individual phases and to generate 2D maps showing nanohardness distribution on the surface of the material. To study local in-plane plastic strain distribution during deformation, in situ tensile tests were carried out using the digital image correlation technique. Significant partitioning of plastic strain between phase microconstituents during tensile deformation is shown. The effect of the microstructure on the mechanical behavior of the Q and P processed steel is analyzed. The local plastic deformation behavior of individual phases is discussed with respect to their strength and their spatial orientation.

  10. Multiphase blends from poly(L-lactide) and poly(methyl mathacrylate).

    Science.gov (United States)

    Le, Kim-Phuong; Lehman, Richard; Remmert, Jessica; Vanness, Kenneth; Ward, Paula Marie L; Idol, James D

    2006-01-01

    Melt processing of poly(L-lactide) (PLLA) and poly(methyl methacrylate) (PMMA) was conducted over a targeted range of compositions with PLLAs of 118 and 316 kDa in molecular mass to identify morphologies and the phase relationships in these blends. These blends are of interest for use in biomaterials and the morphologies are critical for tissue-engineering studies where biodegradability, pore connectivity and surface texture control tissue viability and adhesion. Simple extrusion of the two polymers produced multiphase blends with an average domain size near 25 microm. Scanning electron microscopy and dynamic mechanical analysis demonstrated that these blends are immiscible, at least in a metastable sense, and regions of co-continuous structures were identified. Such co-continuous, which occurred generally in accordance with rheology prediction models, exhibit a fine interconnected structure that appears effective for fabricating certain biomaterials. A broad and unexpected transition appears in these blends, as measured by modulated differential scanning calorimetry between 70 and 100 degrees C, which may be the glass transition temperature of an alloy phase. The magnitude of this transition is greatest in the fine-structured co-continuous composition region of blends, suggesting the presence of a complex or other derivative of the two primary phases.

  11. A ghost fluid method for sharp interface simulations of compressible multiphase flows

    Energy Technology Data Exchange (ETDEWEB)

    Majidi, Sahand; Afshari, Asghar [University of Tehran, Teheran (Iran, Islamic Republic of)

    2016-04-15

    A ghost fluid based computational tool is developed to study a wide range of compressible multiphase flows involving strong shocks and contact discontinuities while accounting for surface tension, viscous stresses and gravitational forces. The solver utilizes constrained reinitialization method to predict the interface configuration at each time step. Surface tension effect is handled via an exact interface Riemann problem solver. Interfacial viscous stresses are approximated by considering continuous velocity and viscous stress across the interface. To assess the performance of the solver several benchmark problems are considered: One-dimensional gas-water shock tube problem, shock-bubble interaction, air cavity collapse in water, underwater explosion, Rayleigh-Taylor Instability, and ellipsoidal drop oscillations. Results obtained from the numerical simulations indicate that the numerical methodology performs reasonably well in predicting flow features and exhibit a very good agreement with prior experimental and numerical observations. To further examine the accuracy of the developed ghost fluid solver, the obtained results are compared to those by a conventional diffuse interface solver. The comparison shows the capability of our ghost fluid method in reproducing the experimentally observed flow characteristics while revealing more details regarding topological changes of the interface.

  12. New systematic methodology for incorporating dynamic heat transfer modelling in multi-phase biochemical reactors.

    Science.gov (United States)

    Fernández-Arévalo, T; Lizarralde, I; Grau, P; Ayesa, E

    2014-09-01

    This paper presents a new modelling methodology for dynamically predicting the heat produced or consumed in the transformations of any biological reactor using Hess's law. Starting from a complete description of model components stoichiometry and formation enthalpies, the proposed modelling methodology has integrated successfully the simultaneous calculation of both the conventional mass balances and the enthalpy change of reaction in an expandable multi-phase matrix structure, which facilitates a detailed prediction of the main heat fluxes in the biochemical reactors. The methodology has been implemented in a plant-wide modelling methodology in order to facilitate the dynamic description of mass and heat throughout the plant. After validation with literature data, as illustrative examples of the capability of the methodology, two case studies have been described. In the first one, a predenitrification-nitrification dynamic process has been analysed, with the aim of demonstrating the easy integration of the methodology in any system. In the second case study, the simulation of a thermal model for an ATAD has shown the potential of the proposed methodology for analysing the effect of ventilation and influent characterization.

  13. A Multiphase Flow in the Antroduodenal Portion of the Gastrointestinal Tract: A Mathematical Model

    Directory of Open Access Journals (Sweden)

    P. V. Trusov

    2016-01-01

    Full Text Available A group of authors has developed a multilevel mathematical model that focuses on functional disorders in a human body associated with various chemical, physical, social, and other factors. At this point, the researchers have come up with structure, basic definitions and concepts of a mathematical model at the “macrolevel” that allow describing processes in a human body as a whole. Currently we are working at the “mesolevel” of organs and systems. Due to complexity of the tasks, this paper deals with only one meso-fragment of a digestive system model. It describes some aspects related to modeling multiphase flow in the antroduodenal portion of the gastrointestinal tract. Biochemical reactions, dissolution of food particles, and motor, secretory, and absorbing functions of the tract are taken into consideration. The paper outlines some results concerning influence of secretory function disorders on food dissolution rate and tract contents acidity. The effect which food density has on inflow of food masses from a stomach to a bowel is analyzed. We assume that the future development of the model will include digestive enzymes and related reactions of lipolysis, proteolysis, and carbohydrates breakdown.

  14. Wall-bounded multiphase flows of N immiscible incompressible fluids: consistency and contact-angle boundary condition

    CERN Document Server

    Dong, S

    2016-01-01

    We present an effective method for simulating wall-bounded multiphase flows consisting of $N$ ($N\\geqslant 2$) immiscible incompressible fluids with different densities, viscosities and pairwise surface tensions. The N-phase physical formulation is based on a modified thermodynamically consistent phase field model that is more general than in a previous work, and it is developed by considering the reduction consistency if some of the fluid components were absent from the system. We propose an N-phase contact-angle boundary condition that is reduction consistent between $N$ phases and $M$ phases ($2\\leqslant M\\leqslant N-1$). We also present a numerical algorithm for solving the N-phase governing equations together with the contact-angle boundary conditions developed herein. Extensive numerical experiments are presented for several flow problems involving multiple fluid components and solid-wall boundaries to investigate the wettability effects with multiple types of contact angles. In particular, we compare s...

  15. Multiphase surfactant-assisted reaction-separation system in a microchannel reactor

    Institute of Scientific and Technical Information of China (English)

    Salah ALJBOUR; Tomohiko TAGAWA; Mohammad MATOUQ; Hiroshi YAMADA

    2009-01-01

    The Lewis acid-catalyzed addition of tri-methylsilyl cyanide to p-chlorobenzaldehyde in a micro-channel reactor was investigated. The microchannel was integrated to promote both reaction and separation of the biphase system. FeF3 and Cu(triflate)2 were used as water-stable Lewis acid catalysts. Sodium dodecyl sulfate was incorporated in the organic-aqueous system to enhance the reactivity and to manipulate the multiphase flow inside the microchannel. It was found that the dynamics and the kinetics of the multiphase reaction were affected by the new micellar system. Parallel multiphase flow inside the microchannel was obtained, allowing for continuous and acceptable phase separation. Enhanced selectivity was achieved by operating at lower conversion values.

  16. Multiphase Flow Dynamics 4 Turbulence, Gas Adsorption and Release, Diesel Fuel Properties

    CERN Document Server

    Kolev, Nikolay Ivanov

    2012-01-01

    The present Volume 4 of the successful monograh package “Multiphase Flow Dynamics”is devoted to selected Chapters of the multiphase fluid dynamics that are important for practical applications but did not find place in the previous volumes. The state of the art of the turbulence modeling in multiphase flows is presented. As introduction, some basics of the single phase boundary layer theory including some important scales and flow oscillation characteristics in pipes and rod bundles are presented. Then the scales characterizing the dispersed flow systems are presented. The description of the turbulence is provided at different level of complexity: simple algebraic models for eddy viscosity, simple algebraic models based on the Boussinesq hypothesis, modification of the boundary layer share due to modification of the bulk turbulence, modification of the boundary layer share due to nucleate boiling. The role of the following forces on the mathematical description of turbulent flows is discussed: the lift fo...

  17. A QCQP Approach for OPF in Multiphase Radial Networks with Wye and Delta Connections: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Zamzam, Ahmed, S.; Zhaoy, Changhong; Dall' Anesey, Emiliano; Sidiropoulos, Nicholas D.

    2017-06-27

    This paper examines the AC Optimal Power Flow (OPF) problem for multiphase distribution networks featuring renewable energy resources (RESs). We start by outlining a power flow model for radial multiphase systems that accommodates wye-connected and delta-connected RESs and non-controllable energy assets. We then formalize an AC OPF problem that accounts for both types of connections. Similar to various AC OPF renditions, the resultant problem is a non convex quadratically-constrained quadratic program. However, the so-called Feasible Point Pursuit-Successive Convex Approximation algorithm is leveraged to obtain a feasible and yet locally-optimal solution. The merits of the proposed solution approach are demonstrated using two unbalanced multiphase distribution feeders with both wye and delta connections.

  18. Pore-scale simulation of multicomponent multiphase reactive transport with dissolution and precipitation

    CERN Document Server

    Chen, Li; Tang, Qing; Robinson, Bruce A; He, Ya-Ling; Tao, Wen-Quan

    2014-01-01

    Multicomponent multiphase reactive transport processes with dissolution-precipitation are widely encountered in energy and environment systems. A pore-scale two-phase multi-mixture model based on the lattice Boltzmann method (LBM) is developed for such complex transport processes, where each phase is considered as a mixture of miscible components in it. The liquid-gas fluid flow with large density ratio is simulated using the multicomponent multiphase pseudo-potential LB model; the transport of certain solute in the corresponding solvent is solved using the mass transport LB model; and the dynamic evolutions of the liquid-solid interface due to dissolution-precipitation are captured by an interface tracking scheme. The model developed can predict coupled multiple physicochemical processes including multiphase flow, multicomponent mass transport, homogeneous reactions in the bulk fluid and heterogeneous dissolution-precipitation reactions at the fluid-solid interface, and dynamic evolution of the solid matrix ...

  19. Modeling of multiphase flow with solidification and chemical reaction in materials processing

    Science.gov (United States)

    Wei, Jiuan

    Understanding of multiphase flow and related heat transfer and chemical reactions are the keys to increase the productivity and efficiency in industrial processes. The objective of this thesis is to utilize the computational approaches to investigate the multiphase flow and its application in the materials processes, especially in the following two areas: directional solidification, and pyrolysis and synthesis. In this thesis, numerical simulations will be performed for crystal growth of several III-V and II-VI compounds. The effects of Prandtl and Grashof numbers on the axial temperature profile, the solidification interface shape, and melt flow are investigated. For the material with high Prandtl and Grashof numbers, temperature field and growth interface will be significantly influenced by melt flow, resulting in the complicated temperature distribution and curved interface shape, so it will encounter tremendous difficulty using a traditional Bridgman growth system. A new design is proposed to reduce the melt convection. The geometric configuration of top cold and bottom hot in the melt will dramatically reduce the melt convection. The new design has been employed to simulate the melt flow and heat transfer in crystal growth with large Prandtl and Grashof numbers and the design parameters have been adjusted. Over 90% of commercial solar cells are made from silicon and directional solidification system is the one of the most important method to produce multi-crystalline silicon ingots due to its tolerance to feedstock impurities and lower manufacturing cost. A numerical model is developed to simulate the silicon ingot directional solidification process. Temperature distribution and solidification interface location are presented. Heat transfer and solidification analysis are performed to determine the energy efficiency of the silicon production furnace. Possible improvements are identified. The silicon growth process is controlled by adjusting heating power and

  20. Multiphase fluid-rock reactions among supercritical carbon dioxide, brine, aquifer, and caprock: relevance to geologic sequestration of carbon

    Energy Technology Data Exchange (ETDEWEB)

    Kaszuba, J. P. (John P.); Janecky, D. R. (David R.); Snow, M. G. (Marjorie G.)

    2004-01-01

    The reactive behavior of a multiphase fluid (supercritical CO{sub 2} and brine) under physical-chemical conditions relevant to geologic storage and sequestration in a carbon repository is largely unknown. Experiments were conducted in a flexible cell hydrothermal apparatus to evaluate multiphase fluid-rock (aquifer plus caprock) reactions that may impact repository integrity.

  1. Multiphase control volume finite element simulations of fractured reservoirs

    Science.gov (United States)

    Fu, Yao

    With rapid evolution of hardware and software techniques in energy sector, reservoir simulation has become a powerful tool for field development planning and reservoir management. Many of the widely used commercial simulators were originally designed for structured grids and implemented with finite difference method (FDM). In recent years, technical advances in griding, fluid modeling, linear solver, reservoir and geological modeling, etc. have created new opportunities. At the same time, new reservoir simulation technology is required for solving large-scale heterogeneous problems. A three-dimensional, three-phase black-oil reservoir simulator has been developed using the control volume finite element (CVFE) formulation. Flux-based upstream weighting is employed to ensure flux continuity. The CVFE method is embedded in a fully-implicit formulation. State-of-the-art parallel, linear solvers are used. The implementation takes the advantages of object-oriented programming capabilities of C++ to provide maximum reuse and extensibility for future students. The results from the simulator have excellent agreement with those from commercial simulators. The convergence properties of the new simulator are verified using the method of manufactured solutions. The pressure and saturation solutions are verified to be first-order convergent as expected. The efficiency of the simulators and their capability to handle real large-scale field models are improved by implementing the models in parallel. Another aspect of the work dealt with multiphase flow of fractured reservoirs was performed. The discrete-fracture model is implemented in the simulator. Fractures and faults are represented by lines and planes in two- and three-dimensional spaces, respectively. The difficult task of generating an unstructured mesh for complex domains with fractures and faults is accomplished in this study. Applications of this model for two-phase and three-phase simulations in a variety of fractured

  2. Nanoparticle additives for multiphase systems: Synthesis, formulation and characterization

    Science.gov (United States)

    Kanniah, Vinod

    Study on nanoparticle additives in multiphase systems (liquid, polymer) are of immense interest in developing new product applications. Critical challenges for nanoparticle additives include their synthesis, formulation and characterization. These challenges are addressed in three application areas: nanofluids for engine lubrication, ultrathin nanocomposites for optical devices, and nanoparticle size distribution characterization. Nanoparticle additives in oligomer mixtures can be used to develop extended temperature range motor oils. A model system includes poly(alpha-olefin) based oligomers with a modest fraction of poly(dimethylsiloxane) oligomers along with graphite as nanoparticle additive. Partition coefficients of each oligomer are determined since the oligomer mixture phase separated at temperatures less than -15 °C. Also, the surface of graphite additive is quantitatively analyzed and modified via silanization for each oligomer. Thus, upon separation of the oligomer mixture, each functionalized graphite additive migrates to its preferred oligomers and forms a uniform dispersion. Similarly, nanoparticle additives in polymer matrices can be used to develop new low haze ultrathin film optical coatings. A model system included an acrylate monomer as the continuous phase with monodisperse or bidisperse mixtures of silica nanoparticles deposited on glass and polycarbonate substrates. Surface (root mean squared roughness, Wenzel's contact angle) and optical properties (haze) of these self assembled experimental surfaces were compared to simulated surface structures. Manipulating the size ratios of silica nanoparticle mixtures varied the average surface roughness and the height distributions, producing multimodal structures with different packing fractions. In both nanofluid and nanocomposite applications, nanoparticle additives tend to aggregate/agglomerate depending on various factors including the state of nanoparticles (powder, dispersion). A set of well

  3. New Multiphase Hybrid Boost Converter with Wide Conversion Ratio for PV System

    Directory of Open Access Journals (Sweden)

    Ioana-Monica Pop-Calimanu

    2014-01-01

    Full Text Available A new multiphase hybrid boost converter, with wide conversion ratio as a solution for photovoltaic energy system, is presented in this paper. To ensure that all the phases of the converter operate at the same switching frequency we use interleaving topology. The proposed converter can be used as an interface between the PV system and the DC load/inverter. This multiphase converter has the advantage of reduced value and physical size of the input and output capacitor as well as the effort for the inductors. To validate the operation of the converter we provide the analyses and the simulation results of the converter.

  4. Time-resolved quantitative multiphase interferometric imaging of a highly focused ultrasound pulse

    CERN Document Server

    Souris, Fabien; Jacquier, Philippe; Dupont-Roc, Jacques; Arvengas, Arnaud; Caupin, Frédéric; 10.1364/AO.49.006127

    2010-01-01

    Interferometric imaging is a well established method to image phase objects by mixing the image wavefront with a reference one on a CCD camera. It has also been applied to fast transient phenomena, mostly through the analysis of single interferograms. It is shown that for repetitive phenomena multiphase acquisition brings significant advantages. A 1 MHz focused sound field emitted by a hemispherical piezotransducer in water is imaged as an example. Quantitative image analysis provides high resolution sound field profiles. Pressure at focus determined by this method agrees with measurements from a fiber-optic probe hydrophone. This confirms that multiphase interferometric imaging can indeed provide quantitative measurements.

  5. Some Specific CASL Requirements for Advanced Multiphase Flow Simulation of Light Water Reactors

    Energy Technology Data Exchange (ETDEWEB)

    R. A. Berry

    2010-11-01

    Because of the diversity of physical phenomena occuring in boiling, flashing, and bubble collapse, and of the length and time scales of LWR systems, it is imperative that the models have the following features: • Both vapor and liquid phases (and noncondensible phases, if present) must be treated as compressible. • Models must be mathematically and numerically well-posed. • The models methodology must be multi-scale. A fundamental derivation of the multiphase governing equation system, that should be used as a basis for advanced multiphase modeling in LWR coolant systems, is given in the Appendix using the ensemble averaging method. The remainder of this work focuses specifically on the compressible, well-posed, and multi-scale requirements of advanced simulation methods for these LWR coolant systems, because without these are the most fundamental aspects, without which widespread advancement cannot be claimed. Because of the expense of developing multiple special-purpose codes and the inherent inability to couple information from the multiple, separate length- and time-scales, efforts within CASL should be focused toward development of a multi-scale approaches to solve those multiphase flow problems relevant to LWR design and safety analysis. Efforts should be aimed at developing well-designed unified physical/mathematical and high-resolution numerical models for compressible, all-speed multiphase flows spanning: (1) Well-posed general mixture level (true multiphase) models for fast transient situations and safety analysis, (2) DNS (Direct Numerical Simulation)-like models to resolve interface level phenmena like flashing and boiling flows, and critical heat flux determination (necessarily including conjugate heat transfer), and (3) Multi-scale methods to resolve both (1) and (2) automatically, depending upon specified mesh resolution, and to couple different flow models (single-phase, multiphase with several velocities and pressures, multiphase with single

  6. The TOUGH codes - a family of simulation tools for multiphase flowand transport processes in permeable media

    Energy Technology Data Exchange (ETDEWEB)

    Pruess, Karsten

    2003-08-08

    Numerical simulation has become a widely practiced andaccepted technique for studying flow and transport processes in thevadose zone and other subsurface flow systems. This article discusses asuite of codes, developed primarily at Lawrence Berkeley NationalLaboratory (LBNL), with the capability to model multiphase flows withphase change. We summarize history and goals in the development of theTOUGH codes, and present the governing equations for multiphase,multicomponent flow. Special emphasis is given to space discretization bymeans of integral finite differences (IFD). Issues of code implementationand architecture are addressed, as well as code applications,maintenance, and future developments.

  7. Whitham's Method and Dubrovin-Novikov Bracket in Single-Phase and Multiphase Cases

    Directory of Open Access Journals (Sweden)

    Andrei Ya. Maltsev

    2012-12-01

    Full Text Available In this paper we examine in detail the procedure of averaging of the local field-theoretic Poisson brackets proposed by B.A. Dubrovin and S.P. Novikov for the method of Whitham. The main attention is paid to the questions of justification and the conditions of applicability of the Dubrovin-Novikov procedure. Separate consideration is given to special features of single-phase and multiphase cases. In particular, one of the main results is the insensitivity of the procedure of bracket averaging to the appearance of ''resonances'' which can arise in the multi-phase situation.

  8. Influence of Hot Deformation and Subsequent Austempering on the Mechanical Properties of Hot Rolled Multiphase Steel

    Institute of Scientific and Technical Information of China (English)

    Zhuang LI; Di WU

    2006-01-01

    Influence of hot deformation and subsequent austempering on the mechanical properties of hot rolled multiphase steel was investigated. Thermo-mechanical control processing (TMCP) was conducted by using a laboratory hot rolling mill, where three different kinds of finishing rolling reduction, and austemperings with various isothermal holding duration were applied. The results have shown that a multiphase microstructure consisting of polygonal ferrite, granular bainite and larger amount of stabilized retained austenite can be obtained by controlled rolling processes. Mechanical properties increase with increasing the amount of deformation because of the stabilization of retained austenite. Ultimate tensile strength (σb), total elongation (δ)36% and 28476 MPa%, respectively) at optimal processes.

  9. Pseudo-2D model of a cross-flow membrane humidifier for a PEM fuel cell under multiphase conditions

    Energy Technology Data Exchange (ETDEWEB)

    Dalet, C.; Diny, M. [Peugeot Citroen Automobile, Carrieres sous Poissy (France). Fuel Cell Program; Maranzana, G.; Lottin, O.; Dillet, J. [Nancy Univ., Vanoeuvre les Nancy (France). Centre national de la recherche scientifique

    2009-07-01

    Membrane dehydration can reduce the performance of proton exchange membrane fuel cells (PEMFCs). However, excessive water at the inlet of the fuel cells can flood cathodes. An understanding of the coupled mass and heat transfer processes involved in membrane humidifiers is needed in order to successfully manage water in PEMFCs. This paper discussed a pseudo-2D model of a cross-flow membrane humidifier for PEMFCs. The model was used to test correlations of the water transport coefficient through a Nafion 115 membrane. The study showed that results obtained using the model differed from experimental results. The effects of inlet operating conditions, flow rates, and temperature on the performance of a planar membrane humidifier under both single- and multi-phase conditions were also investigated.

  10. Theory-Guided Materials Design of Multi-Phase Ti-Nb Alloys with Bone-Matching Elastic Properties

    Directory of Open Access Journals (Sweden)

    Jörg Neugebauer

    2012-10-01

    Full Text Available We present a scale-bridging approach for modeling the integral elasticresponse of polycrystalline composite that is based on a multi-disciplinary combination of(i parameter-free first-principles calculations of thermodynamic phase stability andsingle-crystal elastic stiffness; and (ii homogenization schemes developed forpolycrystalline aggregates and composites. The modeling is used as a theory-guidedbottom-up materials design strategy and applied to Ti-Nb alloys as promising candidatesfor biomedical implant applications. The theoretical results (i show an excellent agreementwith experimental data and (ii reveal a decisive influence of the multi-phase character ofthe polycrystalline composites on their integral elastic properties. The study shows thatthe results based on the density functional theory calculations at the atomistic level canbe directly used for predictions at the macroscopic scale, effectively scale-jumping severalorders of magnitude without using any empirical parameters.

  11. Design of a new multi-phase experimental simulation chamber for atmospheric photosmog, aerosol and cloud chemistry research

    Directory of Open Access Journals (Sweden)

    J. Wang

    2011-11-01

    Full Text Available A new simulation chamber has been built at the Interuniversitary Laboratory of Atmospheric Systems (LISA. The CESAM chamber (French acronym for Experimental Multiphasic Atmospheric Simulation Chamber is designed to allow research in multiphase atmospheric (photo- chemistry which involves both gas phase and condensed phase processes including aerosol and cloud chemistry. CESAM has the potential to carry out variable temperature and pressure experiments under a very realistic artificial solar irradiation. It consists of a 4.2 m3 stainless steel vessel equipped with three high pressure xenon arc lamps which provides a controlled and steady environment. Initial characterization results, all carried out at 290–297 K under dry conditions, concerning lighting homogeneity, mixing efficiency, ozone lifetime, radical sources, NOy wall reactivity, particle loss rates, background PM, aerosol formation and cloud generation are given. Photolysis frequencies of NO2 and O3 related to chamber radiation system were found equal to (4.2 × 10−3 s−1 for JNO2 and (1.4 × 10−5 s−1 for JO1D which is comparable to the solar radiation in the boundary layer. An auxiliary mechanism describing NOy wall reactions has been developed. Its inclusion in the Master Chemical Mechanism allowed us to adequately model the results of experiments on the photo-oxidation of propene-NOx-Air mixtures. Aerosol yields for the α-pinene + O3 system chosen as a reference were determined and found in good agreement with previous studies. Particle lifetime in the chamber ranges from 10 h to 4 days depending on particle size distribution which indicates that the chamber can provide high quality data on aerosol aging processes and their effects. Being evacuable, it is possible to generate in this new chamber

  12. Simultaneous measurement of hysteresis in capillary pressure and electric permittivity for multiphase flow through porous media

    NARCIS (Netherlands)

    Plug, W.J.; Slob, E.C.; Bruining, J.; Moreno Tirado, L.M.

    2007-01-01

    We present a tool that simultaneously measures the complex permittivity and the capillary pressure characteristics for multiphase flow. The sample holder is a parallel plate capacitor. A precision component analyzer is used to measure the impedance amplitude and phase angle as a function of frequenc

  13. A Computational Model for Multi-phase Flow in a Heterogeneous Layered System (poster)

    NARCIS (Netherlands)

    Musivand Arzanfudi, M.

    2013-01-01

    CO2 sequestration in underground formations is currently utilized as a means to mitigate CO2 from indefinitely emitted to the atmosphere. The main concern in such a system is the possible occurrence of leakage to upper layers or to the earth surface. Computational modeling of leakage of a multiphase

  14. Use of the Minnesota Multiphasic Personality Inventory-2 with Persons Diagnosed with Multiple Sclerosis

    Science.gov (United States)

    Hayes, Danielle; Granello, Darcy Haag

    2009-01-01

    Counselors who assess persons with multiple sclerosis (MS) using the Minnesota Multiphasic Personality Inventory-2 (MMPI-2; T. N. Butcher, W. G. Dahlstrom, J. R. Graham, A. Tellegen, & B. Kaemmer, 1989) may find scale elevations on Scales 1, 2, 3, and 8. These elevations may be due, at least in part, to specific questions on the MMPI-2 that…

  15. Multiphasic pH profiles for the reaction of tris-(hydroxymethyl)-aminomethane with phenyl esters

    CERN Document Server

    Nissen, Per

    2015-01-01

    Reanalysis of data (Bruice and York 1961) for the pH dependences of the calculated apparent second-order rate constants (k2) for the reaction of tris-(hydroxymethyl)-aminomethane (TRIS) with phenyl esters reveals that the pH profiles are consistently much better represented as multiphasic, i.e. as a series of straight lines separated by discontinuities in the form of sharp breaks or noncontiguities (jumps), than by the continuous function used by the authors. For p-nitrophenyl acetate, m-nitrophenyl acetate, p-chlorophenyl acetate and phenyl acetate, the profiles are best represented as multiphasic in plots of log k2 vs. pH, whereas the profile for p-methylphenyl acetate is only multiphasic in a plot of k2 vs. pH. Data for the pseudo-first-order rate constants (kobs) give multiphasic pH profiles with patterns identical or very similar to those for k2. Extensive reanalyses of data for a wide variety of enzymatic and non-enzymatic reactions show, similarly, that pH profiles are in general better represented as ...

  16. Use of the Minnesota Multiphasic Personality Inventory-2 with Persons Diagnosed with Multiple Sclerosis

    Science.gov (United States)

    Hayes, Danielle; Granello, Darcy Haag

    2009-01-01

    Counselors who assess persons with multiple sclerosis (MS) using the Minnesota Multiphasic Personality Inventory-2 (MMPI-2; T. N. Butcher, W. G. Dahlstrom, J. R. Graham, A. Tellegen, & B. Kaemmer, 1989) may find scale elevations on Scales 1, 2, 3, and 8. These elevations may be due, at least in part, to specific questions on the MMPI-2 that assess…

  17. Modelling multiphase flow inside the porous media of a polymer electrolyte membrane fuel cell

    DEFF Research Database (Denmark)

    Berning, Torsten; Kær, Søren Knudsen

    2011-01-01

    Transport processes inside polymer electrolyte membrane fuel cells (PEMFC’s) are highly complex and involve convective and diffusive multiphase, multispecies flow through porous media along with heat and mass transfer and electrochemical reactions in conjunction with water transport through an el...

  18. Transmission Electron Microscopy Specimen Preparation Method for Multiphase Porous Functional Ceramics

    DEFF Research Database (Denmark)

    Zhang, Wei; Kuhn, Luise Theil; Jørgensen, Peter Stanley

    2013-01-01

    An optimum method is proposed to prepare thin foil transmission electron microscopy (TEM) lamellae of multiphase porous functional ceramics: prefilling the pore space of these materials with an epoxy resin prior to focused ion beam milling. Several advantages of epoxy impregnation are demonstrate...

  19. Use of the Minnesota Multiphasic Personality Inventory-2 with Persons Diagnosed with Multiple Sclerosis

    Science.gov (United States)

    Hayes, Danielle; Granello, Darcy Haag

    2009-01-01

    Counselors who assess persons with multiple sclerosis (MS) using the Minnesota Multiphasic Personality Inventory-2 (MMPI-2; T. N. Butcher, W. G. Dahlstrom, J. R. Graham, A. Tellegen, & B. Kaemmer, 1989) may find scale elevations on Scales 1, 2, 3, and 8. These elevations may be due, at least in part, to specific questions on the MMPI-2 that…

  20. Low-Jitter Multi-phase Clock Generation: a Comparison between DLLs and Shift Registers

    NARCIS (Netherlands)

    Gao, X.; Klumperink, E.A.M.; Nauta, B.

    2007-01-01

    This paper shows that, for a given power budget, a shift register based multi-phase clock generator (MPCG) generates less jitter than a delay-locked loop (DLL) equivalent when both are realized with current mode logic (CML) circuits and white noise is assumed. This is due to the factor that the shif

  1. Advantages of Shift Registers over DLLs for Flexible Low Jitter Multiphase Clock Generation

    NARCIS (Netherlands)

    Gao, Xiang; Klumperink, Eric A.M.; Nauta, Bram

    2008-01-01

    In this paper, we compare a shift register (SR) to a delay-locked loop (DLL) for flexible multiphase clock generation, and motivate why a SR is not only more flexible but often also better. For a given power budget, we show that a SR almost always generates less jitter than a DLL, assuming both are

  2. Design and Construction of a Shock Tube Experiment for Multiphase Instability Experiments

    Science.gov (United States)

    Middlebrooks, John; Black, Wolfgang; Avgoustopoulos, Constantine; Allen, Roy; Kathakapa, Raj; Guo, Qiwen; McFarland, Jacob

    2016-11-01

    Hydrodynamic instabilities are important phenomena that have a wide range of practical applications in engineering and physics. One such instability, the shock driven multiphase instability (SDMI), arises when a shockwave accelerates an interface between two particle-gas mixtures with differing multiphase properties. The SDMI is present in high energy explosives, scramjets, and supernovae. A practical way of studying shock wave driven instabilities is through experimentation in a shock tube laboratory. This poster presentation will cover the design and data acquisition process of the University of Missouri's Fluid Mixing Shock Tube Laboratory. In the shock tube, a pressure generated shockwave is passed through a multiphase interface, creating the SDMI instability. This can be photographed for observation using high speed cameras, lasers, and advance imaging techniques. Important experimental parameters such as internal pressure and temperature, and mass flow rates of gases can be set and recorded by remotely controlled devices. The experimental facility provides the University of Missouri's Fluid Mixing Shock Tube Laboratory with the ability to validate simulated experiments and to conduct further inquiry into the field of shock driven multiphase hydrodynamic instabilities. Advisor.

  3. Dynamics of multiphase systems with complex microstructure. I. Development of the governing equations through nonequilibrium thermodynamics

    NARCIS (Netherlands)

    Sagis, L.M.C.; Öttinger, H.C.

    2013-01-01

    In this paper we present a general model for the dynamic behavior of multiphase systems in which the bulk phases and interfaces have a complex microstructure (for example, immiscible polymer blends with added compatibilizers, or polymer stabilized emulsions with thickening agents dispersed in the co

  4. CONTINOUS MULTI-PHASE FLOW REACTOR FOR SMALL AND LARGE FLOW CAPACITIES THAN L/MIN

    NARCIS (Netherlands)

    Al-Rawashdeh, Ma'moun; Schouten, Jaap; Nijhuis, T. Alexander; Yue, Jun

    2014-01-01

    Multiphase flow processing in flow reactors holds great promises for diverse applications in fine chemicals and materials synthesis primarily due to its precise control over the flow, mixing and reaction inside or between each phase. Even though, flow reactors have shown superior performance, so far

  5. Forces on bends and T-joints due to multiphase flow

    NARCIS (Netherlands)

    Belfroid, S.P.C.; Cargnelutti, M.F.; Schiferli, W.; Osch, M.M.E. van

    2010-01-01

    To be able to assess the mechanical integrity of piping structures for loading to multiphase flow conditions, air-water experiments were carried out in a horizontal 1" pipe system. Forces and accelerations were measured on a number of bends and T-joint configurations for a wide range of operating co

  6. Drift sands, lakes, and soils: the multiphase Holocene history of the Laarder Wasmeren area near Hilversum

    NARCIS (Netherlands)

    Sevink, J.; Koster, E.A.; van Geel, B.; Wallinga, J.

    2013-01-01

    A unique complex of multiphased Holocene drift sands and paleosols, with at least two lacustrine phases, was discovered during a major sanitation project in the Laarder Wasmeren area near Hilversum, the Netherlands. The complex could be studied in detail, highly facilitated by the excellent and larg

  7. Forces on bends and T-joints due to multiphase flow

    NARCIS (Netherlands)

    Belfroid, S.P.C.; Cargnelutti, M.F.; Schiferli, W.; Osch, M.M.E. van

    2010-01-01

    To be able to assess the mechanical integrity of piping structures for loading to multiphase flow conditions, air-water experiments were carried out in a horizontal 1" pipe system. Forces and accelerations were measured on a number of bends and T-joint configurations for a wide range of operating

  8. Multi-phase flow modeling of soil contamination and soil remediation.

    NARCIS (Netherlands)

    Dijke, van M.I.J.

    1997-01-01

    In this thesis multi-phase flow models are used to study the flow behavior of liquid contaminants in aquifers and of gases that are injected below the groundwater table for remediation purposes. Considered problems are redistribution of a lens of light nonaqueous phase liquid(LNAPL)on a hor

  9. Capabilities of Numerical Simulation of Multiphase Flows in Centrifugal Pumps using Modern CFD Software

    CERN Document Server

    Kochevsky, A N

    2005-01-01

    The paper describes capabilities of numerical simulation of liquid flows with solid and/or gas admixtures in centrifugal pumps using modern commercial CFD software packages, with the purpose to predict performance curves of the pumps treating such media. In particular, the approaches and multiphase flow models available in the package CFX-5 are described; their advantages and disadvantages are analyzed.

  10. Mitigation of Lower Order Harmonics with Filtered Svpwm In Multiphase Voltage Source Inverters

    Directory of Open Access Journals (Sweden)

    K. Uday Kiran

    2014-08-01

    Full Text Available Multi-phase machines and drives is a topic of growing relevance in recent years, and it presents many challenging issues that still need further research. This is the case of multi-phase space vector pulse width modulation (SVPWM, which shows not only more space vectors than the standard three-phase case, but also new subspaces where the space vectors are mapped. In the digital implementation, multiphase reference voltages are sampled and fed into the digital modulator to produce gating signals at a constant clock rate f. This means a finite pulse-width resolution because the gating state transition can only occur at some specific time instants depending on frequency. This results in a deviation of produced phase voltages from the desired phase voltages, i.e., increasing harmonic distortion especially for a small modulation index signal. In the present paper a filtered space-vector pulse-width modulation (SVPWM considering finite pulse-width resolution is proposed to produce a switching sequence with reduced baseband harmonics for multiphase voltage source inverters (VSI. This is achieved by incorporating a pseudo feedback loop regarding weighted voltage difference between desired and produced phase voltages.

  11. RECENT ADVANCES IN STUDIES ON MULTIPHASE AND REACTING FLOWS IN CHINA

    Institute of Scientific and Technical Information of China (English)

    周力行

    2002-01-01

    The recent developments and advances of studies on multiphase and reacting flows, including gas-solid, gas-liquid, liquid-solid and reacting flows, in China are reviewed. Special emphasis is laid on the fundamental studies and numerical models. Some important experimental results are also reported. But measurement techniques are not covered.

  12. CONTINOUS MULTI-PHASE FLOW REACTOR FOR SMALL AND LARGE FLOW CAPACITIES THAN L/MIN

    NARCIS (Netherlands)

    Al-Rawashdeh, Ma'moun; Schouten, Jaap; Nijhuis, T. Alexander; Yue, Jun

    2014-01-01

    Multiphase flow processing in flow reactors holds great promises for diverse applications in fine chemicals and materials synthesis primarily due to its precise control over the flow, mixing and reaction inside or between each phase. Even though, flow reactors have shown superior performance, so far

  13. Multiphase boosting: A growing technology for the challenge of economical deepwater developments

    Energy Technology Data Exchange (ETDEWEB)

    Colombi, P. [Agip S.p.A., Milan (Italy); Chiesa, G. [Snamprogetti S.p.A., Milan (Italy); Aggradi, G.F. [Nuovo Pignone, Florence (Italy)

    1996-12-31

    The current operating success in the subsea prototype testing and the level of development of different pump concepts are promoting multiphase boosting as a reliable technology for the exploitation of subsea fields. From a situation where very basic questions were asked about the expected performance and reliability of this equipment the Industry is now looking at those scenarios showing the greatest potential for the application of this technology like the deep waters. Competitive options to develop subsea fields, however, may be available and, although they may present some disadvantages compared with multiphase boosting, they make use of traditional practices and proven technologies. In the above perspective, the field operational experience plays a key role to prove the suitability of the proposed systems in handling the untreated well fluids under real subsea conditions so giving multiphase boosting a distinct edge over more conventional solutions. To this end, the paper reviews the main results obtained so far by the underwater testing campaign of a prototype multiphase boosting unit at the Agip Prezioso Field, offshore Sicily. In particular, the review addresses the main technological issues encountered during the subsea operation of the boosting unit together with an initial characterization of the experienced unit performance. The above is considered to provide a significant contribution to the evaluation of the current level of maturity of this technology as well as of the present technological gap to meet the requirements posed by real industrial applications, particularly in deep waters.

  14. Gas-to-liquids process using multi-phase flow, non-thermal plasma microreactor

    NARCIS (Netherlands)

    Agiral, Anil; Nozaki, Tomohiro; Nakase, Masahiko; Yuzawa, Shuhei; Okazaki, Ken; Gardeniers, J.G.E. (Han)

    2011-01-01

    A multi-phase flow non-thermal plasma microreactor based on dielectric barrier discharge has been developed for partial oxidation of methane to liquid oxygenates at atmospheric pressure. A pulsed water injection method has been used to remove condensable liquid components from the active discharge r

  15. Proposed Novel Multiphase-Multilevel Inverter Configuration for Open-End Winding Loads

    DEFF Research Database (Denmark)

    Padamanaban, Sanjeevi Kumar; Wheeler, Patrick; Blaabjerg, Frede

    2016-01-01

    This paper presents a new multiphase-multilevel inverter configuration for open-winding loads and suitable for medium power (low-voltage/high-current) applications such as `More Electric Aircraft'. Modular structure comprised of standard dual three-phase voltage source inverter (VSI) along with o...

  16. Multiphasic modification of intrinsic functional connectivity of the rat brain during increasing levels of propofol.

    Science.gov (United States)

    Liu, Xiping; Pillay, Siveshigan; Li, Rupeng; Vizuete, Jeannette A; Pechman, Kimberly R; Schmainda, Kathleen M; Hudetz, Anthony G

    2013-12-01

    The dose-dependent effects of anesthetics on brain functional connectivity are incompletely understood. Resting-state functional magnetic resonance imaging (rsfMRI) is widely used to assess the functional connectivity in humans and animals. Propofol is an anesthetic agent with desirable characteristics for functional neuroimaging in animals but its dose-dependent effects on rsfMRI functional connectivity have not been determined. Here we tested the hypothesis that brain functional connectivity undergoes specific changes in distinct neural networks at anesthetic depths associated with loss of consciousness. We acquired spontaneous blood oxygen level-dependent (BOLD) signals simultaneously with electroencephalographic (EEG) signals from rats under steady-state, intravenously administered propofol at increasing doses from light sedation to deep anesthesia (20, 40, 60, 80, and 100 mg/kg/h IV). Power spectra and burst suppression ratio were calculated from the EEG to verify anesthetic depth. Functional connectivity was determined from the whole brain correlation of BOLD data in regions of interest followed by a segmentation of the correlation maps into anatomically defined regional connectivity. We found that propofol produced multiphasic, dose dependent changes in functional connectivity of various cortical and subcortical networks. Cluster analysis predicted segregation of connectivity into two cortical and two subcortical clusters. In one cortical cluster (somatosensory and parietal), the early reduction in connectivity was followed by transient reversal; in the other cluster (sensory, motor and cingulate/retrosplenial), this rebound was absent. The connectivity of the subcortical cluster (brainstem, hippocampal and caudate) was strongly reduced, whereas that of another (hypothalamus, medial thalamus and n. basalis) did not. Subcortical connectivity increased again in deep anesthesia associated with EEG burst suppression. Regional correlation analysis confirmed the

  17. A numerical method for shock driven multiphase flow with evaporating particles

    Science.gov (United States)

    Dahal, Jeevan; McFarland, Jacob A.

    2017-09-01

    A numerical method for predicting the interaction of active, phase changing particles in a shock driven flow is presented in this paper. The Particle-in-Cell (PIC) technique was used to couple particles in a Lagrangian coordinate system with a fluid in an Eulerian coordinate system. The Piecewise Parabolic Method (PPM) hydrodynamics solver was used for solving the conservation equations and was modified with mass, momentum, and energy source terms from the particle phase. The method was implemented in the open source hydrodynamics software FLASH, developed at the University of Chicago. A simple validation of the methods is accomplished by comparing velocity and temperature histories from a single particle simulation with the analytical solution. Furthermore, simple single particle parcel simulations were run at two different sizes to study the effect of particle size on vorticity deposition in a shock-driven multiphase instability. Large particles were found to have lower enstrophy production at early times and higher enstrophy dissipation at late times due to the advection of the particle vorticity source term through the carrier gas. A 2D shock-driven instability of a circular perturbation is studied in simulations and compared to previous experimental data as further validation of the numerical methods. The effect of the particle size distribution and particle evaporation is examined further for this case. The results show that larger particles reduce the vorticity deposition, while particle evaporation increases it. It is also shown that for a distribution of particles sizes the vorticity deposition is decreased compared to single particle size case at the mean diameter.

  18. Refractory-Slag-Metal-Inclusion Multiphase Reactions Modeling Using Computational Thermodynamics: Kinetic Model for Prediction of Inclusion Evolution in Molten Steel

    Science.gov (United States)

    Shin, Jae Hong; Chung, Yongsug; Park, Joo Hyun

    2017-02-01

    The refractory-slag-metal-inclusion multiphase reaction model was developed by integrating the refractory-slag, slag-metal, and metal-inclusion elementary reactions in order to predict the evolution of inclusions during the secondary refining processes. The mass transfer coefficient in the metal and slag phase, and the mass transfer coefficient of MgO in the slag were employed in the present multiphase reactions modeling. The "Effective Equilibrium Reaction Zone (EERZ) Model" was basically employed. In this model, the reaction zone volume per unit step for metal and slag phase, which is dependent on the `effective reaction zone depth' in each phase, should be defined. Thus, we evaluated the effective reaction zone depth from the mass transfer coefficient in metal and slag phase at 1873 K (1600 °C) for the desulfurization reaction which was measured in the present study. Because the dissolution rate of MgO from the refractory to slag phase is one of the key factors affecting the slag composition, the mass transfer coefficient of MgO in the ladle slag was also experimentally determined. The calculated results for the variation of the composition of slag and molten steel as a function of reaction time were in good agreement with the experimental results. The MgAl2O4 spinel inclusion was observed at the early to middle stage of the reaction, whereas the liquid oxide inclusion was mainly observed at the final stage of the refining reaction. The content of CaO sharply increased, and the SiO2 content increased mildly with the increasing reaction time, while the content of Al2O3 in the inclusion drastically decreased. Even though there is slight difference between the calculated and measured results, the refractory-slag-metal multiphase reaction model constructed in the present study exhibited a good predictability of the inclusion evolution during ladle refining process.

  19. Evaluation of the atmospheric significance of multiphase reactions in atmospheric secondary organic aerosol formation

    Directory of Open Access Journals (Sweden)

    Gelencsér

    2005-01-01

    Full Text Available In a simple conceptual cloud-aerosol model the mass of secondary organic aerosol (SOA that may be formed in multiphase reaction in an idealized scenario involving two cloud cycles separated with a cloud-free period is evaluated. The conditions are set to those typical of continental clouds, and each parameter used in the model calculations is selected as a mean of available observational data of individual species for which the multiphase SOA formation route has been established. In the idealized setting gas and aqueous-phase reactions are both considered, but only the latter is expected to yield products of sufficiently low volatility to be retained by aerosol particles after the cloud dissipates. The key variable of the model is the Henry-constant which primarily determines how important multiphase reactions are relative to gas-phase photooxidation processes. The precursor considered in the model is assumed to already have some affinity to water, i.e. it is a compound having oxygen-containing functional group(s. As a principal model output an aerosol yield parameter is calculated for the multiphase SOA formation route as a function of the Henry-constant, and has been found to be significant already above H~103 M atm-1. Among the potential precursors that may be eligible for this mechanism based on their Henry constants, there are a suite of oxygenated compounds such as primary oxidation products of biogenic and anthropogenic hydrocarbons, including, for example, pinonaldehyde. Finally, the analogy of multiphase SOA formation to in-cloud sulfate production is exploited.

  20. Multiphase reactivity of gaseous hydroperoxide oligomers produced from isoprene ozonolysis in the presence of acidified aerosols

    Science.gov (United States)

    Riva, Matthieu; Budisulistiorini, Sri Hapsari; Zhang, Zhenfa; Gold, Avram; Thornton, Joel A.; Turpin, Barbara J.; Surratt, Jason D.

    2017-03-01

    Ozonolysis of alkenes results in the formation of primary ozonides (POZs), which can subsequently decompose into carbonyl compounds and stabilized Criegee intermediates (sCIs). The sCIs generated from isoprene ozonolysis include the simplest congener, formaldehyde oxide (CH2OO), and isomers of C4-sCI. Although the bimolecular reaction with H2O is expected to be the main fate of sCIs, it was reported that sCIs can also react with carboxylic acids and/or organic hydroperoxides leading to gas-phase oligomeric compounds. While the impact of the gas-phase composition (H2O, sCI scavenger) on the formation of such products was recently studied, their fate remains unclear. In the present work, formation of oligomeric hydroperoxides from isoprene ozonolysis, proposed as reaction products composed of the sCI as a chain unit and formed from the insertion of sCI into a hydroperoxide or a carboxylic acid, was systematically examined in the presence of aerosol with varying compositions. The effect of hydroxyl (OH) radicals on the gas- and particle-phase compositions was investigated using diethyl ether as an OH radical scavenger. Thirty-four oligomeric compounds resulting from the insertion of sCIs into organic hydroperoxides or carboxylic acids were identified using iodide chemical ionization high-resolution mass spectrometry. Large reactive uptake onto acidified sulfate aerosol was observed for most of the characterized gaseous oligomeric species, whereas the presence of organic coatings and the lack of aerosol water significantly reduced or halted the reactive uptake of these species. These results indicate that highly oxidized molecules, such as hydroperoxides, could undergo multiphase reactions, which are significantly influenced by the chemical composition of seed aerosol. Furthermore, in addition to functionalization and accretion, decomposition and re-volatilization should be considered in SOA formation.

  1. Segmentation of hepatic artery in multi-phase liver CT using directional dilation and connectivity analysis

    Science.gov (United States)

    Wang, Lei; Schnurr, Alena-Kathrin; Zidowitz, Stephan; Georgii, Joachim; Zhao, Yue; Razavi, Mohammad; Schwier, Michael; Hahn, Horst K.; Hansen, Christian

    2016-03-01

    Segmentation of hepatic arteries in multi-phase computed tomography (CT) images is indispensable in liver surgery planning. During image acquisition, the hepatic artery is enhanced by the injection of contrast agent. The enhanced signals are often not stably acquired due to non-optimal contrast timing. Other vascular structure, such as hepatic vein or portal vein, can be enhanced as well in the arterial phase, which can adversely affect the segmentation results. Furthermore, the arteries might suffer from partial volume effects due to their small diameter. To overcome these difficulties, we propose a framework for robust hepatic artery segmentation requiring a minimal amount of user interaction. First, an efficient multi-scale Hessian-based vesselness filter is applied on the artery phase CT image, aiming to enhance vessel structures with specified diameter range. Second, the vesselness response is processed using a Bayesian classifier to identify the most probable vessel structures. Considering the vesselness filter normally performs not ideally on the vessel bifurcations or the segments corrupted by noise, two vessel-reconnection techniques are proposed. The first technique uses a directional morphological operator to dilate vessel segments along their centerline directions, attempting to fill the gap between broken vascular segments. The second technique analyzes the connectivity of vessel segments and reconnects disconnected segments and branches. Finally, a 3D vessel tree is reconstructed. The algorithm has been evaluated using 18 CT images of the liver. To quantitatively measure the similarities between segmented and reference vessel trees, the skeleton coverage and mean symmetric distance are calculated to quantify the agreement between reference and segmented vessel skeletons, resulting in an average of 0:55+/-0:27 and 12:7+/-7:9 mm (mean standard deviation), respectively.

  2. Multiphase Flow and Wear in the Cutting Head of Ultra-high Pressure Abrasive Water Jet

    Institute of Scientific and Technical Information of China (English)

    YANG Minguan; WANG Yuli; KANG Can; YU Feng

    2009-01-01

    Abrasive water jet cutting technology is widely applied in the materials processing today and attracts great attention from scholars, but many phenomena concerned are not well understood, especially in the internal jet flow of the cutting head at the condition of ultra-high pressure. The multiphase flow in the cutting head is numerically simulated to study the abrasive motion mechanism and wear inside the cutting head at the pressure beyond 300 Mpa. Visible predictions of the particles trajectories and wear rate in the cutting head are presented. The influences of the abrasive physical properties, size of the jewel orifice and the operating pressure on the trajectories are discussed. Based on the simulation, a wear experiment is carried out under the corresponding pressures. The simulation and experimental results show that the flow in the mixing chamber is composed of the jet core zone and the disturbance zone, both affect the particles trajectories. The mixing efficiency drops with the increase of the abrasive granularity. The abrasive density determines the response of particles to the effects of different flow zones, the abrasive with medium density gives the best general performance. Increasing the operating pressure or using the jewel with a smaller orifice improves the coherency of particles trajectories but increases the wear rate of the jewel holder at the same time. Walls of the jewel holder, the entrance of the mixing chamber and the convergence part of the mixing tube are subject to wear out. The computational and experimental results give a qualitative consistency which proves that this numerical method can provide a reliable and visible cognition of the flow characteristics of ultra-high pressure abrasive water jet. The investigation is benefit for improving the machining properties of water jet cutting systems and the optimization design of the cutting head.

  3. Subsurface Multiphase Flow and Multicomponent Reactive Transport Modeling using High-Performance Computing

    Energy Technology Data Exchange (ETDEWEB)

    Hammond, Glenn E.; Lichtner, Peter C.; Lu, Chuan

    2007-08-01

    Numerical modeling has become a critical tool to the Department of Energy for evaluating the environmental impact of alternative energy sources and remediation strategies for legacy waste sites. Unfortunately, the physical and chemical complexity of many sites overwhelms the capabilities of even most “state of the art” groundwater models. Of particular concern are the representation of highly-heterogeneous stratified rock/soil layers in the subsurface and the biological and geochemical interactions of chemical species within multiple fluid phases. Clearly, there is a need for higher-resolution modeling (i.e. more spatial, temporal, and chemical degrees of freedom) and increasingly mechanistic descriptions of subsurface physicochemical processes. We present research being performed in the development of PFLOTRAN, a parallel multiphase flow and multicomponent reactive transport model. Written in Fortran90, PFLOTRAN is founded upon PETSc data structures and solvers and has exhibited impressive strong scalability on up to 4000 processors on the ORNL Cray XT3. We are employing PFLOTRAN in the simulation of uranium transport at the Hanford 300 Area, a contaminated site of major concern to the Department of Energy, the State of Washington, and other government agencies where overly-simplistic historical modeling erroneously predicted decade removal times for uranium by ambient groundwater flow. By leveraging the billions of degrees of freedom available through high-performance computation using tens of thousands of processors, we can better characterize the release of uranium into groundwater and its subsequent transport to the Columbia River, and thereby better understand and evaluate the effectiveness of various proposed remediation strategies.

  4. Robust second-order scheme for multi-phase flow computations

    Science.gov (United States)

    Shahbazi, Khosro

    2017-06-01

    A robust high-order scheme for the multi-phase flow computations featuring jumps and discontinuities due to shock waves and phase interfaces is presented. The scheme is based on high-order weighted-essentially non-oscillatory (WENO) finite volume schemes and high-order limiters to ensure the maximum principle or positivity of the various field variables including the density, pressure, and order parameters identifying each phase. The two-phase flow model considered besides the Euler equations of gas dynamics consists of advection of two parameters of the stiffened-gas equation of states, characterizing each phase. The design of the high-order limiter is guided by the findings of Zhang and Shu (2011) [36], and is based on limiting the quadrature values of the density, pressure and order parameters reconstructed using a high-order WENO scheme. The proof of positivity-preserving and accuracy is given, and the convergence and the robustness of the scheme are illustrated using the smooth isentropic vortex problem with very small density and pressure. The effectiveness and robustness of the scheme in computing the challenging problem of shock wave interaction with a cluster of tightly packed air or helium bubbles placed in a body of liquid water is also demonstrated. The superior performance of the high-order schemes over the first-order Lax-Friedrichs scheme for computations of shock-bubble interaction is also shown. The scheme is implemented in two-dimensional space on parallel computers using message passing interface (MPI). The proposed scheme with limiter features approximately 50% higher number of inter-processor message communications compared to the corresponding scheme without limiter, but with only 10% higher total CPU time. The scheme is provably second-order accurate in regions requiring positivity enforcement and higher order in the rest of domain.

  5. Online recognition of the multiphase flow regime and study of slug flow in pipeline

    Science.gov (United States)

    Liejin, Guo; Bofeng, Bai; Liang, Zhao; Xin, Wang; Hanyang, Gu

    2009-02-01

    Multiphase flow is the phenomenon existing widely in nature, daily life, as well as petroleum and chemical engineering industrial fields. The interface structure among multiphase and their movement are complicated, which distribute random and heterogeneously in the spatial and temporal scales and have multivalue of the flow structure and state[1]. Flow regime is defined as the macro feature about the multiphase interface structure and its distribution, which is an important feature to describe multiphase flow. The energy and mass transport mechanism differ much for each flow regimes. It is necessary to solve the flow regime recognition to get a clear understanding of the physical phenomena and their mechanism of multiphase flow. And the flow regime is one of the main factors affecting the online measurement accuracy of phase fraction, flow rate and other phase parameters. Therefore, it is of great scientific and technological importance to develop new principles and methods of multiphase flow regime online recognition, and of great industrial background. In this paper, the key reasons that the present method cannot be used to solve the industrial multiphase flow pattern recognition are clarified firstly. Then the prerequisite to realize the online recognition of multiphase flow regime is analyzed, and the recognition rules for partial flow pattern are obtained based on the massive experimental data. The standard templates for every flow regime feature are calculated with self-organization cluster algorithm. The multi-sensor data fusion method is proposed to realize the online recognition of multiphase flow regime with the pressure and differential pressure signals, which overcomes the severe influence of fluid flow velocity and the oil fraction on the recognition. The online recognition method is tested in the practice, which has less than 10 percent measurement error. The method takes advantages of high confidence, good fault tolerance and less requirement of

  6. Dynamic relaxation processes in compressible multiphase flows. Application to evaporation phenomena

    Directory of Open Access Journals (Sweden)

    Le Métayer O.

    2013-07-01

    Full Text Available Phase changes and heat exchanges are examples of physical processes appearing in many industrial applications involving multiphase compressible flows. Their knowledge is of fundamental importance to reproduce correctly the resulting effects in simulation tools. A fine description of the flow topology is thus required to obtain the interfacial area between phases. This one is responsible for the dynamics and the kinetics of heat and mass transfer when evaporation or condensation occurs. Unfortunately this exchange area cannot be obtained easily and accurately especially when complex mixtures (drops, bubbles, pockets of very different sizes appear inside the transient medium. The natural way to solve this specific trouble consists in using a thin grid to capture interfaces at all spatial scales. But this possibility needs huge computing resources and can be hardly used when considering physical systems of large dimensions. A realistic method is to consider instantaneous exchanges between phases by the way of additional source terms in a full non-equilibrium multiphase flow model [2,15,17]. In this one each phase obeys its own equation of state and has its own set of equations and variables (pressure, temperature, velocity, energy, entropy,.... When enabling the relaxation source terms the multiphase mixture instantaneously tends towards a mechanical or thermodynamic equilibrium state at each point of the flow. This strategy allows to mark the boundaries of the real flow behavior and to magnify the dominant physical effects (heat exchanges, evaporation, drag,... inside the medium. A description of the various relaxation processes is given in the paper. Les changements de phase et les transferts de chaleur sont des exemples de phénomènes physiques présents dans de nombreuses applications industrielles faisant intervenir des écoulements compressibles multiphasiques. La connaissance des mécanismes associés est primordiale afin de reproduire

  7. Characterization of multiphase fluid flow during air-sparged hydrocyclone flotation by x-ray CT. Final report, 14 August 1990--13 August 1994

    Energy Technology Data Exchange (ETDEWEB)

    Miller, J.D.

    1994-10-18

    Air sparged hydrocyclone (ASH) flotation is a new particle separation technology that has been developed at the University of Utah. This technology combines froth flotation principles with the flow characteristics of a hydrocyclone such that the ASH system can perform flotation separations in less than a second. This feature provides the ASH with a high specific capacity, 100 to 600 times greater than the specific capacity of conventional flotation machines. In an effort to develop a more detailed understanding of ASH flotation, multiphase flow characteristics of the air sparged hydrocyclone were studied and the relationship of these characteristics with flotation performance was investigated. This investigation was divided into four phases. In the first phase, the time-averaged multiphase flow characteristics of the ASH during its steady state operation were studied using x-ray computed tomography (x-ray CT). In this regard, a model system, mono-sized quartz flotation with dodecyl amine as collector, using a 2 in. diameter ASH unit (ASH-2C), was selected for study. Various flow regimes, namely, the air core, the froth phase, and the swirl layer, were identified and their spatial extent established for different experimental conditions by x-ray CT analysis. In the second phase, a detailed parametric study of flotation response of the ASH for the same system was carried out in order to establish the effect of various operating variables on flotation response. The findings of this phase of investigation were then correlated with the multiphase flow characteristics as revealed by x-ray CT in the first phase. Thus, the impact of various operating variables on the flow regimes, and hence, on flotation response was established.

  8. THE WORK SIMULATION OF FLOW RATE FOR CARRIAGES' REPAIR AS A MULTIPHASE, MULTIPLEX AND MULTIDISCIPLINARY SYSTEM OF MASS SERVICE

    Directory of Open Access Journals (Sweden)

    V. V. Myamlin

    2011-04-01

    Full Text Available The algorithm of computer simulation of the flexible flow for repair of cars as a multiphase polychannel manyobject queuing system is presented. The basic operators of the model are given and their work is described.

  9. Role of multiphasic multi-detector computed tomography (MDCT in the diagnosis and staging of solid neoplastic renal masses

    Directory of Open Access Journals (Sweden)

    Manal H. Wahba

    2015-03-01

    Conclusion: Multiphase multislice computed tomography combined with CT angiography and CT urography have a major role in solid renal neoplastic masses’ diagnosis, characterization and differentiating benign and malignant tumors.

  10. Morphology Evolution on the Fracture Surface and Fracture Mechanisms of Multiphase Nanostructured ZrCu-Base Alloys

    Directory of Open Access Journals (Sweden)

    Feng Qiu

    2017-03-01

    Full Text Available A multiphase nanostructured ZrCu-base bulk alloy which showed a unique microstructure consisting of sub-micrometer scale Zr2Cu solid solution, nano-sized twinned plate-like ZrCu martensite (ZrCu (M, and retained ZrCu (B2 austenite was fabricated by copper mold casting. The observation of periodic morphology evolution on the fracture surface of the multiphase nanostructured ZrCu-base alloys has been reported, which suggested a fluctuant local stress intensity along the crack propagation. It is necessary to investigate the compressive deformation behavior and the fracture mechanism of the multiphase alloy and the relation to the unique microstructures. The results obtained in this study provide a better understanding of the deformation and fracture mechanisms of multiphase hybrid nanostructured ZrCu-based alloys and give guidance on how to improve the ductility/toughness of bulk ZrCu-based alloys.

  11. An Investigation on the Microstructure of Multi-phase Composite Coatings Synthesized by Plasma Spraying Self-reaction Composite Powders

    Institute of Scientific and Technical Information of China (English)

    DONGYan-chun; YANDian-ran; HeJi-ning; LiXiang-zhi; ZHANGJian-xin; NIUEr-wu

    2004-01-01

    Multi-phase self-reacLion composite (denoted as MPc) coatings containing ceramic and metal multi-phases were fabricated by plasma spraying Fe2O3-Al composite powders. This technology successfully combines self-propagating high-temperature synthesis with plasma spraying. The morphology of the composite powders was examined by scanning electron microscope (SEM). The phase composition and microstructure of the composite coating are studied.

  12. An Investigation on the Microstructure of Multi-phase Composite Coatings Synthesized by Plasma Spraying Self-reaction Composite Powders

    Institute of Scientific and Technical Information of China (English)

    DONG Yan-chun; YAN Dian-ran; HE Ji-ning; LI Xiang-zhi; ZHANG Jian-xin; NIU Er-wu

    2004-01-01

    Multi-phase self-reaction composite (denoted as MPc) coatings containing ceramic and metal multi-phases were fabricated by plasma spraying Fe2O3-Al composite powders. This technology successfully combines self-propagating high-temperature synthesis with plasma spraying. The morphology of the composite powders was examined by scanning electron microscope (SEM). The phase composition and microstructure of the composite coating are studied.

  13. Numerical Simulation of the Multiphase Flow in the Rheinsahl-Heraeus (RH) System

    Science.gov (United States)

    Geng, Dian-Qiao; Lei, Hong; He, Ji-Cheng

    2010-02-01

    Knowledge of gas-liquid multiphase flow behavior in the Rheinsahl-Heraeus (RH) system is of great significance to clarify the circulation flow rate, decarburization, and inclusion removal with a reliable description. Thus, based on the separate model of injecting gas behavior, a novel mathematical model of multiphase flow has been developed to give the distribution of gas holdup in the RH system. The numerical results show that the predicted circulation flow rates, the predicted flow velocities, and the predicted mixing times agree with the measured results in a water model and that the predicted tracer concentration curve agrees with the results obtained in an actual RH system. With a lower lifting gas flow rate, the rising gas bubbles are concentrated near the wall; with a higher lifting gas flow rate, gas bubbles can reach the center of the up-snorkel. A critical lifting gas flow rate is used to obtain the maximum circulation flow rate.

  14. Speed-sensorless control strategy for multi-phase induction generator in wind energy conversion systems

    Directory of Open Access Journals (Sweden)

    Dumnić Boris P.

    2016-01-01

    Full Text Available Renewable energy sources, especially wind energy conversion systems (WECS, exhibit constant growth. Increase in power and installed capacity led to advances in WECS topologies. Multi-phase approach presents a new development direction, with several key advantages over three-phase systems. Paired with a sensorless control strategy, multi-phase machines are expected to take primacy over standard solutions. This paper presents speed sensorless vector control of an asymmetrical six-phase induction generator based on a model reference adaptive system (MRAS. Suggested topology and developed control algorithm show that sensorless control can yield appropriate dynamic characteristics for the use in WECS with increase in reliability and robustness. [Projekat Ministarstva nauke Republike Srbije, br. III 042004: Smart Electricity Distribution Grids Based on Distribution Management System and Distributed Generation

  15. Origin of resistivity anomaly in p-type leads chalcogenide multiphase compounds

    Energy Technology Data Exchange (ETDEWEB)

    Aminorroaya Yamini, Sima, E-mail: sima@uow.edu.au, E-mail: jsnyder@caltech.edu; Dou, Shi Xue [Australian Institute for Innovative Materials (AIIM), Innovation Campus, University of Wollongong, NSW 2500 (Australia); Mitchell, David R. G. [Electron Microscopy Centre (EMC), Australian Institute for Innovative Materials (AIIM), Innovation Campus, University of Wollongong, NSW 2500 (Australia); Wang, Heng [Materials Science, California Institute of Technology, Pasadena, CA 91125 (United States); Gibbs, Zachary M. [Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, CA 91125 (United States); Pei, Yanzhong [School of Materials Science and Engineering, Tongji University, 4800 Caoan Road, Shanghai 201804 (China); Snyder, G. Jeffrey, E-mail: sima@uow.edu.au, E-mail: jsnyder@caltech.edu [Electron Microscopy Centre (EMC), Australian Institute for Innovative Materials (AIIM), Innovation Campus, University of Wollongong, NSW 2500 (Australia); ITMO University, Saint Petersburg (Russian Federation)

    2015-05-15

    The electrical resistivity curves for binary phase compounds of p-type lead chalcogenide (PbTe){sub (0.9−x)}(PbSe){sub 0.1}(PbS){sub x,} (x = 0.15, 0.2, 0.25), which contain PbS-rich secondary phases, show different behaviour on heating and cooling between 500-700 K. This is contrast to single phase compounds which exhibit similar behaviour on heating and cooling. We correlate these anomalies in the electrical resistivities of multiphase compounds to the variation in phase composition at high temperatures. The inhomogeneous distribution of dopants between the matrix and secondary phase is found to be crucial in the electronic transport properties of the multiphase compounds. These results can lead to further advances in designing composite Pb-chalcogenides with high thermoelectric performance.

  16. Nonequilibrium Physics and Phase-Field Modeling of Multiphase Flow in Porous Media

    Energy Technology Data Exchange (ETDEWEB)

    Juanes, Ruben [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2016-09-01

    The overarching goal of this project was to develop a new continuum theory of multiphase flow in porous media. The theory follows a phase-field modeling approach, and therefore has a sound thermodynamical basis. It is a phenomenological theory in the sense that its formulation is driven by macroscopic phenomena, such as viscous instabilities during multifluid displacement. The research agenda was organized around a set of hypothesis on hitherto unexplained behavior of multiphase flow. All these hypothesis are nontrivial, and testable. Indeed, a central aspect of the project was testing each hypothesis by means of carefully-designed laboratory experiments, therefore probing the validity of the proposed theory. The proposed research places an emphasis on the fundamentals of flow physics, but is motivated by important energy-driven applications in earth sciences, as well as microfluidic technology.

  17. A Fractional-Flow Based Compressible Multiphase Flow Model with Newly Proposed Constitutive Retentions

    Science.gov (United States)

    Tsai, C.; Yeh, G.

    2011-12-01

    In this investigation, newly proposed constitutive retentions are implemented to a fractional-flow based compressible multiphase-phase flow model. With the new model, a compressible three-phase (water, non-aqueous phase liquid (NAPL) and air) flow problem is simulated. In fractional-flow approaches, the three mass balance equations written in terms of three phase pressures are transformed to those in terms of the total pressure, saturation of water, and saturation of total liquid. These three governing equations are discretized with the Galerkin finite element method (FEM). The resulted matrix equation is solved with Bi-CGSTAB. Several numerical experiments are presented to examine the accuracy and robustness of the proposed model. The results show the presented fractional-flow based multiphase flow model is feasible and yields physically realistic solutions for compressible three-phase flow problems in porous media.

  18. Optical diagnostics for turbulent and multiphase flows: Particle image velocimetry and photorefractive optics

    Energy Technology Data Exchange (ETDEWEB)

    O`Hern, T.J.; Torczynski, J.R.; Shagam, R.N.; Blanchat, T.K.; Chu, T.Y.; Tassin-Leger, A.L.; Henderson, J.A.

    1997-01-01

    This report summarizes the work performed under the Sandia Laboratory Directed Research and Development (LDRD) project ``Optical Diagnostics for Turbulent and Multiphase Flows.`` Advanced optical diagnostics have been investigated and developed for flow field measurements, including capabilities for measurement in turbulent, multiphase, and heated flows. Particle Image Velocimetry (PIV) includes several techniques for measurement of instantaneous flow field velocities and associated turbulence quantities. Nonlinear photorefractive optical materials have been investigated for the possibility of measuring turbulence quantities (turbulent spectrum) more directly. The two-dimensional PIV techniques developed under this LDRD were shown to work well, and were compared with more traditional laser Doppler velocimetry (LDV). Three-dimensional PIV techniques were developed and tested, but due to several experimental difficulties were not as successful. The photorefractive techniques were tested, and both potential capabilities and possible problem areas were elucidated.

  19. Popularization of Multiphase Transportation Promotes the Technical Progress in Oil/Gas Gathering and Transportation

    Institute of Scientific and Technical Information of China (English)

    Li Jianmin; Wang Xinlan

    1997-01-01

    @@ At present, the technique of combining multiphase and single phase transportation is commonly adopted in the oil & gas gathering and transportation system of domestic onshore oilfields. This way of transportation not only meets the need of oilfield development and production but also facilitates the management. It is worth improving and popularizing for the onshore oilfields with good material and ground conditions. However, with the enlargement of the oil & gas prospecting and developing areas, if this technique is still in use, the economic benefit of oilfield development would be affected directly. If the multiphase transportation technique is adopted and the oil and gas are pumped together to the gathering station for treatment, obvious economic benefit can be achieved.

  20. LDRD final report: Physical simulation of nonisothermal multiphase multicomponent flow in porous media

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, M.J.; Hopkins, P.L.; Shadid, J.N.

    1997-07-01

    This document reports on the accomplishments of a laboratory-directed research and development (LDRD) project whose objective was to initiate a research program for developing a fundamental understanding of multiphase multicomponent subsurface transport in heterogeneous porous media and to develop parallel processing computational tools for numerical simulation of such problems. The main achievement of this project was the successful development of a general-purpose, unstructured grid, multiphase thermal simulator for subsurface transport in heterogeneous porous media implemented for use on massively parallel (MP) computers via message-passing and domain decomposition techniques. The numerical platform provides an excellent base for new and continuing project development in areas of current interest to SNL and the DOE complex including, subsurface nuclear waste disposal and cleanup, groundwater availability and contamination studies, fuel-spill transport for accident analysis, and DNAPL transport and remediation.