A multi-national report on methods for institutional credentialing for spine radiosurgery

International Nuclear Information System (INIS)

Gerszten, Peter C; Shin, John H; Winey, Brian; Oh, Kevin; Sweeney, Reinhart A; Guckenberger, Matthias; Sahgal, Arjun; Sheehan, Jason P; Kersh, Ronald; Chen, Stephanie; Flickinger, John C; Quader, Mubina; Fahim, Daniel; Grills, Inga

2013-01-01

Stereotactic body radiotherapy and radiosurgery are rapidly emerging treatment options for both malignant and benign spine tumors. Proper institutional credentialing by physicians and medical physicists as well as other personnel is important for the safe and effective adoption of spine radiosurgery. This article describes the methods for institutional credentialing for spine radiosurgery at seven highly experienced international institutions. All institutions (n = 7) are members of the Elekta Spine Radiosurgery Research Consortium and have a dedicated research and clinical focus on image-guided spine radiosurgery. A questionnaire consisting of 24 items covering various aspects of institutional credentialing for spine radiosurgery was completed by all seven institutions. Close agreement was observed in most aspects of spine radiosurgery credentialing at each institution. A formal credentialing process was believed to be important for the implementation of a new spine radiosurgery program, for patient safety and clinical outcomes. One institution has a written policy specific for spine radiosurgery credentialing, but all have an undocumented credentialing system in place. All institutions rely upon an in-house proctoring system for the training of both physicians and medical physicists. Four institutions require physicians and medical physicists to attend corporate sponsored training. Two of these 4 institutions also require attendance at a non-corporate sponsored academic society radiosurgery course. Corporate as well as non-corporate sponsored training were believed to be complimentary and both important for training. In 5 centers, all cases must be reviewed at a multidisciplinary conference prior to radiosurgery treatment. At 3 centers, neurosurgeons are not required to be involved in all cases if there is no evidence for instability or spinal cord compression. Backup physicians and physicists are required at only 1 institution, but all institutions have more

Development of efficiency indicators of operating room management for multi-institutional comparisons.

Science.gov (United States)

Tanaka, Masayuki; Lee, Jason; Ikai, Hiroshi; Imanaka, Yuichi

2013-04-01

The efficiency of a hospital's operating room (OR) management can affect its overall profitability. However, existing indicators that assess OR management efficiency do not take into account differences in hospital size, manpower and functional characteristics, thereby rendering them unsuitable for multi-institutional comparisons. The aim of this study was to develop indicators of OR management efficiency that would take into account differences in hospital size and manpower, which may then be applied to multi-institutional comparisons. Using administrative data from 224 hospitals in Japan from 2008 to 2010, we performed four multiple linear regression analyses at the hospital level, in which the dependent variables were the number of operations per OR per month, procedural fees per OR per month, total utilization times per OR per month and total fees per OR per month for each of the models. The expected values of these four indicators were produced using multiple regression analysis results, adjusting for differences in hospital size and manpower, which are beyond the control of process owners' management. However, more than half of the variations in three of these four indicators were shown to be explained by differences in hospital size and manpower. Using the ratio of observed to expected values (OE ratio), as well as the difference between the two values (OE difference) allows hospitals to identify weaknesses in efficiency with more validity when compared to unadjusted indicators. The new indicators may support the improvement and sustainment of a high-quality health care system. © 2012 Blackwell Publishing Ltd.

Modeling Multi-Level Systems

CERN Document Server

Iordache, Octavian

2011-01-01

This book is devoted to modeling of multi-level complex systems, a challenging domain for engineers, researchers and entrepreneurs, confronted with the transition from learning and adaptability to evolvability and autonomy for technologies, devices and problem solving methods. Chapter 1 introduces the multi-scale and multi-level systems and highlights their presence in different domains of science and technology. Methodologies as, random systems, non-Archimedean analysis, category theory and specific techniques as model categorification and integrative closure, are presented in chapter 2. Chapters 3 and 4 describe polystochastic models, PSM, and their developments. Categorical formulation of integrative closure offers the general PSM framework which serves as a flexible guideline for a large variety of multi-level modeling problems. Focusing on chemical engineering, pharmaceutical and environmental case studies, the chapters 5 to 8 analyze mixing, turbulent dispersion and entropy production for multi-scale sy...

Tree Based Decision Strategies and Auctions in Computational Multi-Agent Systems

Czech Academy of Sciences Publication Activity Database

Šlapák, M.; Neruda, Roman

2017-01-01

Roč. 38, č. 4 (2017), s. 335-342 ISSN 0257-4306 Institutional support: RVO:67985807 Keywords : auction systems * decision making * genetic programming * multi-agent system * task distribution Subject RIV: IN - Informatics, Computer Science OBOR OECD: Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8) http://rev-inv-ope.univ-paris1.fr/fileadmin/rev-inv-ope/files/38417/38417-04.pdf

Multi-institutional MicroCT image comparison of image-guided small animal irradiators

Science.gov (United States)

Johnstone, Chris D.; Lindsay, Patricia; E Graves, Edward; Wong, Eugene; Perez, Jessica R.; Poirier, Yannick; Ben-Bouchta, Youssef; Kanesalingam, Thilakshan; Chen, Haijian; E Rubinstein, Ashley; Sheng, Ke; Bazalova-Carter, Magdalena

2017-07-01

To recommend imaging protocols and establish tolerance levels for microCT image quality assurance (QA) performed on conformal image-guided small animal irradiators. A fully automated QA software SAPA (small animal phantom analyzer) for image analysis of the commercial Shelley micro-CT MCTP 610 phantom was developed, in which quantitative analyses of CT number linearity, signal-to-noise ratio (SNR), uniformity and noise, geometric accuracy, spatial resolution by means of modulation transfer function (MTF), and CT contrast were performed. Phantom microCT scans from eleven institutions acquired with four image-guided small animal irradiator units (including the commercial PXi X-RAD SmART and Xstrahl SARRP systems) with varying parameters used for routine small animal imaging were analyzed. Multi-institutional data sets were compared using SAPA, based on which tolerance levels for each QA test were established and imaging protocols for QA were recommended. By analyzing microCT data from 11 institutions, we established image QA tolerance levels for all image quality tests. CT number linearity set to R 2  >  0.990 was acceptable in microCT data acquired at all but three institutions. Acceptable SNR  >  36 and noise levels  1.5 lp mm-1 for MTF  =  0.2) was obtained at all but four institutions due to their large image voxel size used (>0.275 mm). Ten of the eleven institutions passed the set QA tolerance for geometric accuracy (2000 HU for 30 mgI ml-1). We recommend performing imaging QA with 70 kVp, 1.5 mA, 120 s imaging time, 0.20 mm voxel size, and a frame rate of 5 fps for the PXi X-RAD SmART. For the Xstrahl SARRP, we recommend using 60 kVp, 1.0 mA, 240 s imaging time, 0.20 mm voxel size, and 6 fps. These imaging protocols should result in high quality images that pass the set tolerance levels on all systems. Average SAPA computation time for complete QA analysis for a 0.20 mm voxel, 400 slice Shelley phantom microCT data set

Timing system for multi-bunch/multi-train operation at ATF

International Nuclear Information System (INIS)

Naito, T.; Hayano, H.; Urakawa, J.; Imai, T.

2000-01-01

A timing system has been constructed for multi-bunch/multi-train operation at KEK-ATF. The linac accelerates 20 bunches of multi-bunch with 2.8 ns spacing. The Damping Ring stores up to 5 trains of multi-bunch. The timing system is required to provide flexible operation mode and bucket selection. A personal computer is used for manipulating the timing. The performance of kicker magnets at the injection/extruction is key issue for multi-train operation. The hardware and the test results are presented. (author)

A Multi-Institution Study of Student Demographics and Outcomes in Chemical Engineering

Science.gov (United States)

Lord, Susan M.; Layton, Richard A.; Ohland, Matthew W.; Brawner, Catherine E.; Long, Russell A.

2014-01-01

Using a large multi-institutional dataset, we describe demographics and outcomes for students starting in and transferring into chemical engineering (ChE). In this dataset, men outnumber women in ChE except among black students. While ChE starters graduate in ChE at rates comparable to or above their racial/ethnic population average for…

RMS: a platform for managing cross-disciplinary and multi-institutional research project collaboration.

Science.gov (United States)

Luo, Jake; Apperson-Hansen, Carolyn; Pelfrey, Clara M; Zhang, Guo-Qiang

2014-11-30

Cross-institutional cross-disciplinary collaboration has become a trend as researchers move toward building more productive and innovative teams for scientific research. Research collaboration is significantly changing the organizational structure and strategies used in the clinical and translational science domain. However, due to the obstacles of diverse administrative structures, differences in area of expertise, and communication barriers, establishing and managing a cross-institutional research project is still a challenging task. We address these challenges by creating an integrated informatics platform to reduce the barriers to biomedical research collaboration. The Request Management System (RMS) is an informatics infrastructure designed to transform a patchwork of expertise and resources into an integrated support network. The RMS facilitates investigators' initiation of new collaborative projects and supports the management of the collaboration process. In RMS, experts and their knowledge areas are categorized and managed structurally to provide consistent service. A role-based collaborative workflow is tightly integrated with domain experts and services to streamline and monitor the life-cycle of a research project. The RMS has so far tracked over 1,500 investigators with over 4,800 tasks. The research network based on the data collected in RMS illustrated that the investigators' collaborative projects increased close to 3 times from 2009 to 2012. Our experience with RMS indicates that the platform reduces barriers for cross-institutional collaboration of biomedical research projects. Building a new generation of infrastructure to enhance cross-disciplinary and multi-institutional collaboration has become an important yet challenging task. In this paper, we share the experience of developing and utilizing a collaborative project management system. The results of this study demonstrate that a web-based integrated informatics platform can facilitate and

Multi-objective optimization of linear multi-state multiple sliding window system

International Nuclear Information System (INIS)

Konak, Abdullah; Kulturel-Konak, Sadan; Levitin, Gregory

2012-01-01

This paper considers the optimal element sequencing in a linear multi-state multiple sliding window system that consists of n linearly ordered multi-state elements. Each multi-state element can have different states: from complete failure up to perfect functioning. A performance rate is associated with each state. The failure of type i in the system occurs if for any i (1≤i≤I) the cumulative performance of any r i consecutive elements is lower than w i . The element sequence strongly affects the probability of any type of system failure. The sequence that minimizes the probability of certain type of failure can provide high probability of other types of failures. Therefore the optimization problem for the multiple sliding window system is essentially multi-objective. The paper formulates and solves the multi-objective optimization problem for the multiple sliding window systems. A multi-objective Genetic Algorithm is used as the optimization engine. Illustrative examples are presented.

Multi-agent and complex systems

CERN Document Server

Ren, Fenghui; Fujita, Katsuhide; Zhang, Minjie; Ito, Takayuki

2017-01-01

This book provides a description of advanced multi-agent and artificial intelligence technologies for the modeling and simulation of complex systems, as well as an overview of the latest scientific efforts in this field. A complex system features a large number of interacting components, whose aggregate activities are nonlinear and self-organized. A multi-agent system is a group or society of agents which interact with others cooperatively and/or competitively in order to reach their individual or common goals. Multi-agent systems are suitable for modeling and simulation of complex systems, which is difficult to accomplish using traditional computational approaches.

Multi-actuators vehicle collision avoidance system - Experimental validation

Science.gov (United States)

Hamid, Umar Zakir Abdul; Zakuan, Fakhrul Razi Ahmad; Akmal Zulkepli, Khairul; Zulfaqar Azmi, Muhammad; Zamzuri, Hairi; Rahman, Mohd Azizi Abdul; Aizzat Zakaria, Muhammad

2018-04-01

The Insurance Institute for Highway Safety (IIHS) of the United States of America in their reports has mentioned that a significant amount of the road mishaps would be preventable if more automated active safety applications are adopted into the vehicle. This includes the incorporation of collision avoidance system. The autonomous intervention by the active steering and braking systems in the hazardous scenario can aid the driver in mitigating the collisions. In this work, a real-time platform of a multi-actuators vehicle collision avoidance system is developed. It is a continuous research scheme to develop a fully autonomous vehicle in Malaysia. The vehicle is a modular platform which can be utilized for different research purposes and is denominated as Intelligent Drive Project (iDrive). The vehicle collision avoidance proposed design is validated in a controlled environment, where the coupled longitudinal and lateral motion control system is expected to provide desired braking and steering actuation in the occurrence of a frontal static obstacle. Results indicate the ability of the platform to yield multi-actuators collision avoidance navigation in the hazardous scenario, thus avoiding the obstacle. The findings of this work are beneficial for the development of a more complex and nonlinear real-time collision avoidance work in the future.

Robot-assisted laparoscopic dismembered pyeloplasty for ureteropelvic junction obstruction: a multi-institutional experience.

Science.gov (United States)

Sivaraman, Ananthakrishnan; Leveillee, Raymond J; Patel, Manoj B; Chauhan, Sanket; Bracho, Jorge E; Moore, Charles R; Coelho, Rafael F; Palmer, Kenneth J; Schatloff, Oscar; Bird, Vincent G; Munver, Ravi; Patel, Vipul R

2012-02-01

To report a 6-year multi-institutional experience and outcomes with robot-assisted laparoscopic pyeloplasty (RLP) for the repair of ureteropelvic junction obstruction (UPJO). Between June 2002 and October 2008, 168 adult patients from 3 institutions underwent RLP for UPJO. A retrospective analysis of prospectively collected data were performed after institutional review board approval. Diagnosis was by intravenous urogram or computed tomography scan and diuretic renogram. All patients underwent RLP through a 4-port laparoscopic technique. Demographic, preoperative, operative, and postoperative endpoints for primary and secondary repair of UPJO were measured. Success was defined as a T½ of <20 minutes on diuretic renogram and symptom resolution. Pain resolution was assessed by subjective patient reports. Of 168 patients, 147 (87.5%) had primary repairs and 21 (12.5%) had secondary repairs. Of the secondary repairs, 57% had a crossing vessel etiology. Mean operative time was 134.9 minutes, estimated blood loss was 49 mL, and length of stay was 1.5 days. Mean follow-up was 39 months. Overall, 97.6% of patients had a successful outcome, with a 6.6% overall complication rate. To our knowledge, this review represents the largest multi-institutional experience of RLP with intermediate-term follow-up. RLP is a safe, efficacious, and viable option for either primary or secondary repair of UPJO with reproducible outcomes, a high success rate, and a low incidence of complications. Copyright © 2012 Elsevier Inc. All rights reserved.

Multi-criteria objective based climate change impact assessment for multi-purpose multi-reservoir systems

Science.gov (United States)

Müller, Ruben; Schütze, Niels

2014-05-01

Water resources systems with reservoirs are expected to be sensitive to climate change. Assessment studies that analyze the impact of climate change on the performance of reservoirs can be divided in two groups: (1) Studies that simulate the operation under projected inflows with the current set of operational rules. Due to non adapted operational rules the future performance of these reservoirs can be underestimated and the impact overestimated. (2) Studies that optimize the operational rules for best adaption of the system to the projected conditions before the assessment of the impact. The latter allows for estimating more realistically future performance and adaption strategies based on new operation rules are available if required. Multi-purpose reservoirs serve various, often conflicting functions. If all functions cannot be served simultaneously at a maximum level, an effective compromise between multiple objectives of the reservoir operation has to be provided. Yet under climate change the historically preferenced compromise may no longer be the most suitable compromise in the future. Therefore a multi-objective based climate change impact assessment approach for multi-purpose multi-reservoir systems is proposed in the study. Projected inflows are provided in a first step using a physically based rainfall-runoff model. In a second step, a time series model is applied to generate long-term inflow time series. Finally, the long-term inflow series are used as driving variables for a simulation-based multi-objective optimization of the reservoir system in order to derive optimal operation rules. As a result, the adapted Pareto-optimal set of diverse best compromise solutions can be presented to the decision maker in order to assist him in assessing climate change adaption measures with respect to the future performance of the multi-purpose reservoir system. The approach is tested on a multi-purpose multi-reservoir system in a mountainous catchment in Germany. A

Fairness in multi-agent systems

NARCIS (Netherlands)

Jong, de S.; Tuyls, K.P.; Verbeeck, K.

2008-01-01

Multi-agent systems are complex systems in which multiple autonomous entities, called agents, cooperate in order to achieve a common or personal goal. These entities may be computer software, robots, and also humans. In fact, many multi-agent systems are intended to operate in cooperation with or as

Distributed Control in Multi-Vehicle Systems

Directory of Open Access Journals (Sweden)

Paul A. Avery

2013-12-01

Full Text Available The Southwest Research Institute (SwRI Mobile Autonomous Robotics Technology Initiative (MARTI program has enabled the development of fully-autonomous passenger-sized commercial vehicles and military tactical vehicles, as well as the development of cooperative vehicle behaviors, such as cooperative sensor sharing and cooperative convoy operations. The program has also developed behaviors to interface intelligent vehicles with intelligent road-side devices. The development of intelligent vehicle behaviors cannot be approached as stand-alone phenomena; rather, they must be understood within a context of the broader traffic system dynamics. The study of other complex systems has shown that system-level behaviors emerge as a result of the spatio-temporal dynamics within a system's constituent parts. The design of such systems must therefore account for both the system-level emergent behavior, as well as behaviors of individuals within the system. It has also become clear over the past several years, for both of these domains, that human trust in the behavior of individual vehicles is paramount to broader technology adoption. This paper examines the interplay between individual vehicle capabilities, vehicle connectivity, and emergent system behaviors, and presents some considerations for a distributed control paradigm in a multi-vehicle system.

CER Hub: An informatics platform for conducting comparative effectiveness research using multi-institutional, heterogeneous, electronic clinical data.

Science.gov (United States)

Hazlehurst, Brian L; Kurtz, Stephen E; Masica, Andrew; Stevens, Victor J; McBurnie, Mary Ann; Puro, Jon E; Vijayadeva, Vinutha; Au, David H; Brannon, Elissa D; Sittig, Dean F

2015-10-01

Comparative effectiveness research (CER) requires the capture and analysis of data from disparate sources, often from a variety of institutions with diverse electronic health record (EHR) implementations. In this paper we describe the CER Hub, a web-based informatics platform for developing and conducting research studies that combine comprehensive electronic clinical data from multiple health care organizations. The CER Hub platform implements a data processing pipeline that employs informatics standards for data representation and web-based tools for developing study-specific data processing applications, providing standardized access to the patient-centric electronic health record (EHR) across organizations. The CER Hub is being used to conduct two CER studies utilizing data from six geographically distributed and demographically diverse health systems. These foundational studies address the effectiveness of medications for controlling asthma and the effectiveness of smoking cessation services delivered in primary care. The CER Hub includes four key capabilities: the ability to process and analyze both free-text and coded clinical data in the EHR; a data processing environment supported by distributed data and study governance processes; a clinical data-interchange format for facilitating standardized extraction of clinical data from EHRs; and a library of shareable clinical data processing applications. CER requires coordinated and scalable methods for extracting, aggregating, and analyzing complex, multi-institutional clinical data. By offering a range of informatics tools integrated into a framework for conducting studies using EHR data, the CER Hub provides a solution to the challenges of multi-institutional research using electronic medical record data. Copyright © 2015. Published by Elsevier Ireland Ltd.

Closure relations for the multi-species Euler system. Construction and study of relaxation schemes for the multi-species and multi-components Euler systems; Relations de fermeture pour le systeme des equations d'Euler multi-especes. Construction et etude de schemas de relaxation en multi-especes et en multi-constituants

Energy Technology Data Exchange (ETDEWEB)

Dellacherie, St. [CEA Saclay, Dir. de l' Energie Nucleaire DEN/SFNME/LMPE, Lab. de Modelisation Physique et de l' Enrichissement, 91 - Gif sur Yvette (France); Rency, N. [Paris-11 Univ., CNRS UMR 8628, 91 - Orsay (France)

2001-07-01

After having recalled the formal convergence of the semi-classical multi-species Boltzmann equations toward the multi-species Euler system (i.e. mixture of gases having the same velocity), we generalize to this system the closure relations proposed by B. Despres and by F. Lagoutiere for the multi-components Euler system (i.e. mixture of non miscible fluids having the same velocity). Then, we extend the energy relaxation schemes proposed by F. Coquel and by B. Perthame for the numerical resolution of the mono-species Euler system to the multi-species isothermal Euler system and to the multi-components isobar-isothermal Euler system. This allows to obtain a class of entropic schemes under a CFL criteria. In the multi-components case, this class of entropic schemes is perhaps a way for the treatment of interface problems and, then, for the treatment of the numerical mixture area by using a Lagrange + projection scheme. Nevertheless, we have to find a good projection stage in the multi-components case. At last, in the last chapter, we discuss, through the study of a dynamical system, about a system proposed by R. Abgrall and by R. Saurel for the numerical resolution of the multi-components Euler system.

DDC in DSpace: Integration of Multi-lingual Subject Access System in Institutional Digital Repositories

Directory of Open Access Journals (Sweden)

Bijan Kumar Roy

2017-12-01

Full Text Available The paper discusses the nature of Knowledge Organization Systems (KOSs and shows how these can support digital library users. It demonstrates processes related to integration of KOS like the Dewey Decimal Classification, 22nd edition (DDC22 in DSpace software (http://www.dspace.org/ for organizing and retrieving (browsing and searching scholarly objects. An attempt has been made to use the DDC22 available in Bengali language and highlights the required mechanisms for system-level integration. It may help repository administrator to build IDR (Institutional Digital Repository integrated with SKOS-enabled multilingual subject access systems for supporting subject descriptors based indexing (DC.Subject metadata element, structured navigation (browsing and efficient searching.

The Multi-Campus System's Role in Maintaining Institutional Diversity in Texas, Public Universities

Science.gov (United States)

Lewis, Rebecca J.

2012-01-01

Institutional diversity is a long-held value in U.S. higher education with origins dating back 300 years to pre-Revolutionary colonial colleges. Institutional diversity is still valued today, but Institutional theory predicts that institutional organizations, such as universities, will homogenize without intervention to prevent loss of diversity.…

Student Perceptions of Service Quality in a Multi-Campus Higher Education System in Spain

Science.gov (United States)

Gallifa, Josep; Batalle, Pere

2010-01-01

Purpose: This paper aims to present an in-depth case study with student perceptions of service quality, discussing the relevance of these perceptions for the important issue of quality improvement in higher education. Design/methodology/approach: The paper presents institutional research carried out in a multi-campus system in Spain made up of…

Integrative invasion science: model systems, multi-site studies, focused meta-analysis, and invasion syndromes

Czech Academy of Sciences Publication Activity Database

Kueffer, C.; Pyšek, Petr; Richardson, D. M.

2013-01-01

Roč. 200, č. 3 (2013), s. 615-633 ISSN 1469-8137 R&D Projects: GA ČR(CZ) GAP504/11/1028; GA ČR GA206/09/0563 Institutional support: RVO:67985939 Keywords : model systems * invasion syndromes * multi-site studies Subject RIV: EF - Botanics Impact factor: 6.545, year: 2013

AIP study of multi-institutional collaborations: Phase 1, high-energy physics

International Nuclear Information System (INIS)

Warnow-Blewett, J.; Weart, S.R.

1992-01-01

Although the multi-institutional collaboration is increasingly the organizational framework for scientific research, it has received only incidental attention from scholars. Without a dedicated effort to understand the process of collaborative research, even the records necessary for efficient administration, for historical and: studies, and for posterity, will be largely scattered or destroyed. The Center for History of Physics of the American Institute of Physics (AIP) is working to redress this situation with a multi-stage investigation. The aim is to identify patterns of collaborations, define the scope of the documentation problems, field test possible solutions, and recommend future actions. The first phase of the study addressed high-energy physics. The two-year study of high-energy physics research focused on experiments approved between 1973 and 1984 at five of the world's major accelerator laboratories. A broad-scale picture of changes in the structure of collaborations was obtained by using databases on high energy physics experiments and publications, At a more detailed level, the project conducted interviews on 24 selected experimental collaborations. Still more detailed ''probes'' of some highly significant collaborations featured historical research as well as many additional interviews and work to preserve records. Some 300 interviews were analyzed to identify patterns of collaborative research and records creation, retention, and location. Meanwhile project staff surveyed the records-keeping practices of key physicists and made numerous site visits to accelerator facilities and university archives to discuss archival issues and records policies

Multi-target consensus circle pursuit for multi-agent systems via a distributed multi-flocking method

Science.gov (United States)

Pei, Huiqin; Chen, Shiming; Lai, Qiang

2016-12-01

This paper studies the multi-target consensus pursuit problem of multi-agent systems. For solving the problem, a distributed multi-flocking method is designed based on the partial information exchange, which is employed to realise the pursuit of multi-target and the uniform distribution of the number of pursuing agents with the dynamic target. Combining with the proposed circle formation control strategy, agents can adaptively choose the target to form the different circle formation groups accomplishing a multi-target pursuit. The speed state of pursuing agents in each group converges to the same value. A Lyapunov approach is utilised to analyse the stability of multi-agent systems. In addition, a sufficient condition is given for achieving the dynamic target consensus pursuit, and which is then analysed. Finally, simulation results verify the effectiveness of the proposed approaches.

A multi-institutional Stellarator Configuration Study

Science.gov (United States)

Gates, David

2017-10-01

A multi-institutional study aimed at mapping the space of quasi-axisymmetric stellarators has begun. The goal is to gain improved understanding of the dependence of important physics and engineering parameters (e.g. bootstrap current, stability, coil complexity, etc.) on plasma shape (average elongation, aspect ratio, number of periods). In addition, the stellarator optimization code STELLOPT will be upgraded with new capabilities such as improved coil design algorithms such as COILOPT + + and REGCOIL, divertor optimization options, equilibria with islands using the SPEC code, and improved bootstrap current calculations with the SFINCS code. An effort is underway to develop metrics for divertor optimization. STELLOPT has also had numerous improvements to numerical algorithms and parallelization capabilities. Simultaneously, we also are pursuing the optimization of turbulent transport according to the method of proxy functions. Progress made to date includes an elongation scan on quasi-axisymmetric equilibria and an initial comparison between the SFINCS code and the BOOTSJ calculation of bootstrap current currently available in STELLOPT. Further progress on shape scans and subsequent physics analysis will be reported. The status of the STELLOPT upgrades will be described. The eventual goal of this exercise is to identify attractive configurations for future US experimental facilities.. This work is supported by US DoE Contract Number DE-AC02-09CH11466.

Multi-level predictive maintenance for multi-component systems

International Nuclear Information System (INIS)

Nguyen, Kim-Anh; Do, Phuc; Grall, Antoine

2015-01-01

In this paper, a novel predictive maintenance policy with multi-level decision-making is proposed for multi-component system with complex structure. The main idea is to propose a decision-making process considered on two levels: system level and component one. The goal of the decision rules at the system level is to address if preventive maintenance actions are needed regarding the predictive reliability of the system. At component level the decision rules aim at identifying optimally a group of several components to be preventively maintained when preventive maintenance is trigged due to the system level decision. Selecting optimal components is based on a cost-based group improvement factor taking into account the predictive reliability of the components, the economic dependencies as well as the location of the components in the system. Moreover, a cost model is developed to find the optimal maintenance decision variables. A 14-component system is finally introduced to illustrate the use and the performance of the proposed predictive maintenance policy. Different sensitivity analysis are also investigated and discussed. Indeed, the proposed policy provides more flexibility in maintenance decision-making for complex structure systems, hence leading to significant profits in terms of maintenance cost when compared with existing policies. - Highlights: • A predictive maintenance policy for complex structure systems is proposed. • Multi-level decision process based on prognostic results is proposed. • A cost-based group importance measure is introduced for decision-making. • Both positive and negative dependencies between components are investigated. • A cost model and Monte Carlo simulation are developed for optimization process.

Multi-Agent Systems for E-Commerce

OpenAIRE

Solodukha, T. V.; Sosnovskiy, O. A.; Zhelezko, B. A.

2009-01-01

The article focuses on multi-agent systems (MAS) and domains that can benefit from multi-agent technology. In the last few years, the agent based modeling (ABM) community has developed several practical agent based modeling toolkits that enable individuals to develop agent-based applications. The comparison of agent-based modeling toolkits is given. Multi-agent systems are designed to handle changing and dynamic business processes. Any organization with complex and distributed business pro...

What Impact Does Behavior of Doctors and Patients on Service Integration of Multi-institutional Readmission cross Township—county Hospitals in Rural China

OpenAIRE

Zhang, Yan; Tang, Wenxi; Zhang, Liang

2017-01-01

Background: With the change of rural residents’ disease spectrum and patients with chronic diseases boom, multi-institutional health service utilization of rural residents and the continuous service demands are growing sharply in rural China.Objective: Evaluate the service integration of multi-institutional readmission cross township—county hospitals (MRCTCH) in rural China, and figure out determines of service integration.Methods: This study featured 7 sample counties in rural China. Based o...

Ontology-based multi-agent systems

Energy Technology Data Exchange (ETDEWEB)

Hadzic, Maja; Wongthongtham, Pornpit; Dillon, Tharam; Chang, Elizabeth [Digital Ecosystems and Business Intelligence Institute, Perth, WA (Australia)

2009-07-01

The Semantic web has given a great deal of impetus to the development of ontologies and multi-agent systems. Several books have appeared which discuss the development of ontologies or of multi-agent systems separately on their own. The growing interaction between agents and ontologies has highlighted the need for integrated development of these. This book is unique in being the first to provide an integrated treatment of the modeling, design and implementation of such combined ontology/multi-agent systems. It provides clear exposition of this integrated modeling and design methodology. It further illustrates this with two detailed case studies in (a) the biomedical area and (b) the software engineering area. The book is, therefore, of interest to researchers, graduate students and practitioners in the semantic web and web science area. (orig.)

Comparing predictive models of glioblastoma multiforme built using multi-institutional and local data sources.

Science.gov (United States)

Singleton, Kyle W; Hsu, William; Bui, Alex A T

2012-01-01

The growing amount of electronic data collected from patient care and clinical trials is motivating the creation of national repositories where multiple institutions share data about their patient cohorts. Such efforts aim to provide sufficient sample sizes for data mining and predictive modeling, ultimately improving treatment recommendations and patient outcome prediction. While these repositories offer the potential to improve our understanding of a disease, potential issues need to be addressed to ensure that multi-site data and resultant predictive models are useful to non-contributing institutions. In this paper we examine the challenges of utilizing National Cancer Institute datasets for modeling glioblastoma multiforme. We created several types of prognostic models and compared their results against models generated using data solely from our institution. While overall model performance between the data sources was similar, different variables were selected during model generation, suggesting that mapping data resources between models is not a straightforward issue.

Kepler Confirmation of Multi-Planet Systems

Science.gov (United States)

Cochran, W. D.

2011-10-01

The NASA Kepler spacecraft has detected 170 candidate multi-planet systems in the first two quarters of data released in February 2011 by Borucki et al. (2011). These systems comprise 115 double candidate systems, 45 triple candidate sys- tems, and 10 systems with 4 or more candidate planets. The architecture and dynamics of these systems were discussed by Lissauer et al. (2011), and a comparison of candidates in single- and multi-planet systems was presented by Latham et al. (2011). Proceeding from "planetary candidate" systems to confirmed and validated multi-planet systems is a difficult process, as most of these systems orbit stars too faint to obtain extremely precise (1ms-1) radial velocity confimation. Here, we discuss in detail the use of transit timing vari- ations (cf. e.g. Holman et al., 2010) to confirm planets near a mean motion resonance. We also discuss extensions to the BLENDER validation (Torres et al., 2004, 2011; Fressin et al., 2011) to validate planets in multi-planet systems. Kepler was competitively selected as the tenth Discovery mission. Funding for the Kepler Mis- sion is provided by NASA's Science Mission Direc- torate. We are deeply grateful for the very hard work of the entire Kepler team.

Multi-Institutional Sharing of Electronic Health Record Data to Assess Childhood Obesity.

Directory of Open Access Journals (Sweden)

L Charles Bailey

Full Text Available To evaluate the validity of multi-institutional electronic health record (EHR data sharing for surveillance and study of childhood obesity.We conducted a non-concurrent cohort study of 528,340 children with outpatient visits to six pediatric academic medical centers during 2007-08, with sufficient data in the EHR for body mass index (BMI assessment. EHR data were compared with data from the 2007-08 National Health and Nutrition Examination Survey (NHANES.Among children 2-17 years, BMI was evaluable for 1,398,655 visits (56%. The EHR dataset contained over 6,000 BMI measurements per month of age up to 16 years, yielding precise estimates of BMI. In the EHR dataset, 18% of children were obese versus 18% in NHANES, while 35% were obese or overweight versus 34% in NHANES. BMI for an individual was highly reliable over time (intraclass correlation coefficient 0.90 for obese children and 0.97 for all children. Only 14% of visits with measured obesity (BMI ≥95% had a diagnosis of obesity recorded, and only 20% of children with measured obesity had the diagnosis documented during the study period. Obese children had higher primary care (4.8 versus 4.0 visits, p<0.001 and specialty care (3.7 versus 2.7 visits, p<0.001 utilization than non-obese counterparts, and higher prevalence of diverse co-morbidities. The cohort size in the EHR dataset permitted detection of associations with rare diagnoses. Data sharing did not require investment of extensive institutional resources, yet yielded high data quality.Multi-institutional EHR data sharing is a promising, feasible, and valid approach for population health surveillance. It provides a valuable complement to more resource-intensive national surveys, particularly for iterative surveillance and quality improvement. Low rates of obesity diagnosis present a significant obstacle to surveillance and quality improvement for care of children with obesity.

A survey of informatics platforms that enable distributed comparative effectiveness research using multi-institutional heterogeneous clinical data

Science.gov (United States)

Sittig, Dean F.; Hazlehurst, Brian L.; Brown, Jeffrey; Murphy, Shawn; Rosenman, Marc; Tarczy-Hornoch, Peter; Wilcox, Adam B.

2012-01-01

Comparative Effectiveness Research (CER) has the potential to transform the current healthcare delivery system by identifying the most effective medical and surgical treatments, diagnostic tests, disease prevention methods and ways to deliver care for specific clinical conditions. To be successful, such research requires the identification, capture, aggregation, integration, and analysis of disparate data sources held by different institutions with diverse representations of the relevant clinical events. In an effort to address these diverse demands, there have been multiple new designs and implementations of informatics platforms that provide access to electronic clinical data and the governance infrastructure required for inter-institutional CER. The goal of this manuscript is to help investigators understand why these informatics platforms are required and to compare and contrast six, large-scale, recently funded, CER-focused informatics platform development efforts. We utilized an 8-dimension, socio-technical model of health information technology use to help guide our work. We identified six generic steps that are necessary in any distributed, multi-institutional CER project: data identification, extraction, modeling, aggregation, analysis, and dissemination. We expect that over the next several years these projects will provide answers to many important, and heretofore unanswerable, clinical research questions. PMID:22692259

Community Forest Management and the Emergence of Multi-Scale Governance Institutions: Lessons for REDD+ Development from Mexico, Brazil and Bolivia

Directory of Open Access Journals (Sweden)

Gabriel Medina

2011-03-01

Full Text Available At their most local, initiatives to reduce emissions from deforestation and degradation (REDD will depend on rural people to manage forest resources. Although the design of frameworks, mechanisms and arrangements, to implement REDD programs have received significant attention, it is not yet clear how REDD+ will function on the ground or how the participation of local populations will be assured. Community forest management (CFM could be an option under REDD+ depending on how it is negotiated, largely because of the expectation that CFM could reduce emissions from deforestation and degradation. Examining institutional factors in the emergence of successful CFM systems and local forest enterprises could provide valuable lessons for REDD planners. We examine cases of CFM development in Mexico, Brazil and Bolivia, to assess the role of multi-scaled governance institutions in their development. Comparing and contrasting advanced CFM systems to regions where it is still emerging, we will show how the establishment of a local organizational base for communal resource management is crucial.

Information extraction from multi-institutional radiology reports.

Science.gov (United States)

Hassanpour, Saeed; Langlotz, Curtis P

2016-01-01

The radiology report is the most important source of clinical imaging information. It documents critical information about the patient's health and the radiologist's interpretation of medical findings. It also communicates information to the referring physicians and records that information for future clinical and research use. Although efforts to structure some radiology report information through predefined templates are beginning to bear fruit, a large portion of radiology report information is entered in free text. The free text format is a major obstacle for rapid extraction and subsequent use of information by clinicians, researchers, and healthcare information systems. This difficulty is due to the ambiguity and subtlety of natural language, complexity of described images, and variations among different radiologists and healthcare organizations. As a result, radiology reports are used only once by the clinician who ordered the study and rarely are used again for research and data mining. In this work, machine learning techniques and a large multi-institutional radiology report repository are used to extract the semantics of the radiology report and overcome the barriers to the re-use of radiology report information in clinical research and other healthcare applications. We describe a machine learning system to annotate radiology reports and extract report contents according to an information model. This information model covers the majority of clinically significant contents in radiology reports and is applicable to a wide variety of radiology study types. Our automated approach uses discriminative sequence classifiers for named-entity recognition to extract and organize clinically significant terms and phrases consistent with the information model. We evaluated our information extraction system on 150 radiology reports from three major healthcare organizations and compared its results to a commonly used non-machine learning information extraction method. We

Energy-aware Thread and Data Management in Heterogeneous Multi-core, Multi-memory Systems

Energy Technology Data Exchange (ETDEWEB)

Su, Chun-Yi [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

2014-12-16

By 2004, microprocessor design focused on multicore scaling—increasing the number of cores per die in each generation—as the primary strategy for improving performance. These multicore processors typically equip multiple memory subsystems to improve data throughput. In addition, these systems employ heterogeneous processors such as GPUs and heterogeneous memories like non-volatile memory to improve performance, capacity, and energy efficiency. With the increasing volume of hardware resources and system complexity caused by heterogeneity, future systems will require intelligent ways to manage hardware resources. Early research to improve performance and energy efficiency on heterogeneous, multi-core, multi-memory systems focused on tuning a single primitive or at best a few primitives in the systems. The key limitation of past efforts is their lack of a holistic approach to resource management that balances the tradeoff between performance and energy consumption. In addition, the shift from simple, homogeneous systems to these heterogeneous, multicore, multi-memory systems requires in-depth understanding of efficient resource management for scalable execution, including new models that capture the interchange between performance and energy, smarter resource management strategies, and novel low-level performance/energy tuning primitives and runtime systems. Tuning an application to control available resources efficiently has become a daunting challenge; managing resources in automation is still a dark art since the tradeoffs among programming, energy, and performance remain insufficiently understood. In this dissertation, I have developed theories, models, and resource management techniques to enable energy-efficient execution of parallel applications through thread and data management in these heterogeneous multi-core, multi-memory systems. I study the effect of dynamic concurrent throttling on the performance and energy of multi-core, non-uniform memory access

Mainstreaming Multi-Risk Approaches into Policy

Directory of Open Access Journals (Sweden)

Anna Scolobig

2017-12-01

Full Text Available Multi-risk environments are characterized by domino effects that often amplify the overall risk. Those include chains of hazardous events and increasing vulnerability, among other types of correlations within the risk process. The recently developed methods for multi-hazard and risk assessment integrate interactions between different risks by using harmonized procedures based on common metrics. While the products of these assessments, such as multi-hazard and -risk indexes, maps, cascade scenarios, or warning systems provide innovative and effective information, they also pose specific challenges to policy makers and practitioners due to their novel cross-disciplinary aspects. In this paper we discuss the institutional barriers to the adoption of multi-risk approaches, summarizing the results of the fieldwork conducted in Italy and Guadeloupe and of workshops with disaster risk reduction practitioners from eleven European countries. Results show the need for a clear identification of responsibilities for the implementation of multi-risk approaches, as institutional frameworks for risk reduction remain to this day primarily single-risk centered. Authorities are rarely officially responsible for the management of domino effects between e.g., tsunamis and industrial accidents, earthquake and landslides, floods and electricity network failures. Other barriers for the implementation of multi-risk approaches include the limited measures to reduce exposure at the household level, inadequate financial capacities at the local level and limited public-private partnerships, especially in case of interactions between natural and industrial risks. Adapting the scale of institutions to that of multi-risk environments remains a major challenge to better mainstream multi-risk approaches into policy. To address it, we propose a multi-risk governance framework, which includes the phases of observation, social and institutional context analysis, generation of

Data management, documentation and analysis systems in radiation oncology: a multi-institutional survey

International Nuclear Information System (INIS)

Kessel, Kerstin A.; Combs, Stephanie E.

2015-01-01

Recently, information availability has become more elaborate and widespread, and treatment decisions are based on a multitude of factors. Gathering relevant data, also referred to as Big Data, is therefore critical for reaching the best patient care, and enhancing interdisciplinary and clinical research. Combining patient data from all involved systems is essential to prepare unstructured data for analyses. This demands special coordination in data management. Our study aims to characterize current developments in German-speaking hospital departments and practices. We successfully conducted the survey with the members of the Deutsche Gesellschaft für Radioonkologie (DEGRO). A questionnaire was developed consisting of 17 questions related to data management, documentation and clinical trial analyses, reflecting the clinical topics such as basic patient information, imaging, follow-up information as well as connection of documentation tools with radiooncological treatment planning machines. A total of 44 institutions completed the online survey (University hospitals n = 17, hospitals n = 13, practices/institutes n = 14). University hospitals, community hospitals and private practices are equally equipped concerning IT infrastructure for clinical use. However, private practices have a low interest in research work. All respondents stated the biggest obstacles about introducing a documentation system into their unit lie in funding and support of the central IT departments. Only 27 % (12/44) of responsible persons are specialists for documentation and data management. Our study gives an understanding of the challenges and solutions we need to be looking at for medical data storage. In the future, inter-departmental cross-links will enable the radiation oncology community to generate large-scale analyses. The online version of this article (doi:10.1186/s13014-015-0543-0) contains supplementary material, which is available to authorized users

SU-F-P-13: NRG Oncology Medical Physics Manpower Survey Quantifying Support Demands for Multi Institutional Clinical Trials

Energy Technology Data Exchange (ETDEWEB)

Monroe, J [St. Anthony’s Cancer Center, St. Louis, MO (United States); Case Western Reserve University (United States); Boparai, K [ACR, Reston, VA (United States); Xiao, Y [University of Pennsylvania, Philadelphia, PA (United States); Followill, D [UT MD Anderson Cancer Center, Houston, TX (United States); Galvin, J [Thomas Jefferson University Hospital, Newtown, PA (United States); Sohn, J [Case Western University, Cleveland, OH (United States)

2016-06-15

Purpose: A survey was taken by NRG Oncology to assess Full Time Equivalent (FTE) contributions to multi institutional clinical trials by medical physicists.No current quantification of physicists’ efforts in FTE units associated with clinical trials is available. The complexity of multi-institutional trials increases with new technologies and techniques. Proper staffing may directly impact the quality of trial data and outcomes. The demands on physics time supporting clinical trials needs to be assessed. Methods: The NRG Oncology Medical Physicist Subcommittee created a sixteen question survey to obtain this FTE data. IROC Houston distributed the survey to their list of 1802 contact physicists. Results: After three weeks, 363 responded (20.1% response). 187 (51.5%) institutions reporting external beam participation were processed. There was a wide range in number of protocols active and supported at each institution. Of the 187 clinics, 134 (71.7%) participate in 0 to 10 trials, 28 (15%) in 11 to 20 trials, 10 (5.3%) in 21 to 30 trials, 9 (4.8%) had 40 to 75 trials. On average, physicist spent 2.7 hours (SD: 6.0) per week supervising or interacting with clinical trial staff. 1.25 hours (SD: 3.37), 1.83 hours (SD: 4.13), and 0.64 hours(SD: 1.13) per week were spent on patient simulation, reviewing treatment plans, and maintaining a DICOM server, respectively. For all protocol credentialing activities, physicist spent an average of 37.05 hours (SD: 96.94) yearly. To support dosimetrists, clinicians, and therapists, physicist spend on average 2.07 hours (SD: 3.52) per week just reading protocols. Physicist attended clinical trial meetings for on average 1.13 hours (SD: 1.85) per month. Conclusion: Responding physicists spend a nontrivial amount of time: 8.8 hours per week (0.22 FTE) supporting, on average, 9 active multi-institutional clinical trials.

Optimizing survivability of multi-state systems with multi-level protection by multi-processor genetic algorithm

International Nuclear Information System (INIS)

Levitin, Gregory; Dai Yuanshun; Xie Min; Leng Poh, Kim

2003-01-01

In this paper we consider vulnerable systems which can have different states corresponding to different combinations of available elements composing the system. Each state can be characterized by a performance rate, which is the quantitative measure of a system's ability to perform its task. Both the impact of external factors (stress) and internal causes (failures) affect system survivability, which is determined as probability of meeting a given demand. In order to increase the survivability of the system, a multi-level protection is applied to its subsystems. This means that a subsystem and its inner level of protection are in their turn protected by the protection of an outer level. This double-protected subsystem has its outer protection and so forth. In such systems, the protected subsystems can be destroyed only if all of the levels of their protection are destroyed. Each level of protection can be destroyed only if all of the outer levels of protection are destroyed. We formulate the problem of finding the structure of series-parallel multi-state system (including choice of system elements, choice of structure of multi-level protection and choice of protection methods) in order to achieve a desired level of system survivability by the minimal cost. An algorithm based on the universal generating function method is used for determination of the system survivability. A multi-processor version of genetic algorithm is used as optimization tool in order to solve the structure optimization problem. An application example is presented to illustrate the procedure presented in this paper

Multi-bunch Feedback Systems

CERN Document Server

Lonza, M.

2014-12-19

Coupled-bunch instabilities excited by the interaction of the particle beam with its surroundings can seriously limit the performance of circular particle accelerators. These instabilities can be cured by the use of active feedback systems based on sensors capable of detecting the unwanted beam motion and actuators that apply the feedback correction to the beam. Advances in electronic technology now allow the implementation of feedback loops using programmable digital systems. Besides important advantages in terms of flexibility and reproducibility, digital systems open the way to the use of novel diagnostic tools and additional features. We first introduce coupled-bunch instabilities, analysing the equation of motion of charged particles and the different modes of oscillation of a multi-bunch beam, showing how they can be observed and measured. Different types of feedback systems will then be presented as examples of real implementations that belong to the history of multi-bunch feedback systems. The main co...

Diffusion of elements and vacancies in multi-component systems

Czech Academy of Sciences Publication Activity Database

Fischer, F. D.; Svoboda, Jiří

2014-01-01

Roč. 60, MAR (2014), s. 338-367 ISSN 0079-6425 Institutional support: RVO:68081723 Keywords : multi-component diffusion * vacancy activity * manning theory * stress-driven diffusion Subject RIV: BJ - Thermodynamics Impact factor: 27.417, year: 2014

SU-F-P-35: A Multi-Institutional Plan Quality Checking Tool Built On Oncospace: A Shared Radiation Oncology Database System

International Nuclear Information System (INIS)

Bowers, M; Robertson, S; Moore, J; Wong, J; Phillips, M; Hendrickson, K; Evans, K; McNutt, T

2016-01-01

Purpose: Late toxicity from radiation to critical structures limits the possible dose in Radiation Therapy. Perfectly conformal treatment of a target is not realizable, so the clinician must accept a certain level of collateral radiation to nearby OARs. But how much? General guidelines exist for healthy tissue sparing which guide RT treatment planning, but are these guidelines good enough to create the optimal plan given the individualized patient anatomy? We propose a means to evaluate the planned dose level to an OAR using a multi-institutional data-store of previously treated patients, so a clinician might reconsider planning objectives. Methods: The tool is built on Oncospace, a federated data-store system, which consists of planning data import, web based analysis tools, and a database containing:1) DVHs: dose by percent volume delivered to each ROI for each patient previously treated and included in the database.2) Overlap Volume Histograms (OVHs): Anatomical measure defined as the percent volume of an ROI within a given distance to target structures.Clinicians know what OARs are important to spare. For any ROI, Oncospace knows for which patients’ anatomy that ROI was harder to plan in the past (the OVH is less). The planned dose should be close to the least dose of previous patients. The tool displays the dose those OARs were subjected to, and the clinician can make a determination about the planning objectives used.Multiple institutions contribute to the Oncospace Consortium, and their DVH and OVH data are combined and color coded in the output. Results: The Oncospace website provides a plan quality display tool which identifies harder to treat patients, and graphically displays the dose delivered to them for comparison with the proposed plan. Conclusion: The Oncospace Consortium manages a data-store of previously treated patients which can be used for quality checking new plans. Grant funding by Elekta.

SU-F-P-35: A Multi-Institutional Plan Quality Checking Tool Built On Oncospace: A Shared Radiation Oncology Database System

Energy Technology Data Exchange (ETDEWEB)

Bowers, M; Robertson, S; Moore, J; Wong, J [Johns Hopkins University, Baltimore, MD (United States); Phillips, M [University Washington, Seattle, WA (United States); Hendrickson, K; Evans, K [University of Washington, Seattle, WA (United States); McNutt, T [Johns Hopkins University, Severna Park, MD (United States)

2016-06-15

Purpose: Late toxicity from radiation to critical structures limits the possible dose in Radiation Therapy. Perfectly conformal treatment of a target is not realizable, so the clinician must accept a certain level of collateral radiation to nearby OARs. But how much? General guidelines exist for healthy tissue sparing which guide RT treatment planning, but are these guidelines good enough to create the optimal plan given the individualized patient anatomy? We propose a means to evaluate the planned dose level to an OAR using a multi-institutional data-store of previously treated patients, so a clinician might reconsider planning objectives. Methods: The tool is built on Oncospace, a federated data-store system, which consists of planning data import, web based analysis tools, and a database containing:1) DVHs: dose by percent volume delivered to each ROI for each patient previously treated and included in the database.2) Overlap Volume Histograms (OVHs): Anatomical measure defined as the percent volume of an ROI within a given distance to target structures.Clinicians know what OARs are important to spare. For any ROI, Oncospace knows for which patients’ anatomy that ROI was harder to plan in the past (the OVH is less). The planned dose should be close to the least dose of previous patients. The tool displays the dose those OARs were subjected to, and the clinician can make a determination about the planning objectives used.Multiple institutions contribute to the Oncospace Consortium, and their DVH and OVH data are combined and color coded in the output. Results: The Oncospace website provides a plan quality display tool which identifies harder to treat patients, and graphically displays the dose delivered to them for comparison with the proposed plan. Conclusion: The Oncospace Consortium manages a data-store of previously treated patients which can be used for quality checking new plans. Grant funding by Elekta.

Optimization of multi-branch switched diversity systems

KAUST Repository

Nam, Haewoon; Alouini, Mohamed-Slim

2009-01-01

A performance optimization based on the optimal switching threshold(s) for a multi-branch switched diversity system is discussed in this paper. For the conventional multi-branch switched diversity system with a single switching threshold

Applications of Multi-Agent Technology to Power Systems

Science.gov (United States)

Nagata, Takeshi

Currently, agents are focus of intense on many sub-fields of computer science and artificial intelligence. Agents are being used in an increasingly wide variety of applications. Many important computing applications such as planning, process control, communication networks and concurrent systems will benefit from using multi-agent system approach. A multi-agent system is a structure given by an environment together with a set of artificial agents capable to act on this environment. Multi-agent models are oriented towards interactions, collaborative phenomena, and autonomy. This article presents the applications of multi-agent technology to the power systems.

MO-G-201-01: A Multi-Institutional Study Investigating the Performance of a Knowledge-Based Planning System Against Pinnacle Auto-Planning Engine in SIB-IMRT for the Head-And-Neck Cancer

Energy Technology Data Exchange (ETDEWEB)

Wu, B; Pang, D [Georgetown University Hospital, Washington, DC (United States); Kusters, M; Kunze-busch, M; Dijkema, T [Radboud University Medical Center, Nijmegen (Netherlands); McNutt, T [Johns Hopkins University, Baltimore, MD (United States); Sanguineti, G [Istituto Nazionale Tumori Regina Elena, Roma (Italy)

2016-06-15

generate plans of comparable quality in a multi-institutional setting. Variations in clinical protocols can be effectively addressed for cross-institutional adaptations. Binbin Wu and Todd McNutt are the co-inventors of a patent associated with the proposed knowledge-based planning system which was licensed to Varian Medical Systems in 2015; This research was in part supported by Philips Radiation Oncology Systems.

A multi-objective optimization problem for multi-state series-parallel systems: A two-stage flow-shop manufacturing system

International Nuclear Information System (INIS)

Azadeh, A.; Maleki Shoja, B.; Ghanei, S.; Sheikhalishahi, M.

2015-01-01

This research investigates a redundancy-scheduling optimization problem for a multi-state series parallel system. The system is a flow shop manufacturing system with multi-state machines. Each manufacturing machine may have different performance rates including perfect performance, decreased performance and complete failure. Moreover, warm standby redundancy is considered for the redundancy allocation problem. Three objectives are considered for the problem: (1) minimizing system purchasing cost, (2) minimizing makespan, and (3) maximizing system reliability. Universal generating function is employed to evaluate system performance and overall reliability of the system. Since the problem is in the NP-hard class of combinatorial problems, genetic algorithm (GA) is used to find optimal/near optimal solutions. Different test problems are generated to evaluate the effectiveness and efficiency of proposed approach and compared to simulated annealing optimization method. The results show the proposed approach is capable of finding optimal/near optimal solution within a very reasonable time. - Highlights: • A redundancy-scheduling optimization problem for a multi-state series parallel system. • A flow shop with multi-state machines and warm standby redundancy. • Objectives are to optimize system purchasing cost, makespan and reliability. • Different test problems are generated and evaluated by a unique genetic algorithm. • It locates optimal/near optimal solution within a very reasonable time

Using the CER Hub to ensure data quality in a multi-institution smoking cessation study.

Science.gov (United States)

Walker, Kari L; Kirillova, Olga; Gillespie, Suzanne E; Hsiao, David; Pishchalenko, Valentyna; Pai, Akshatha Kalsanka; Puro, Jon E; Plumley, Robert; Kudyakov, Rustam; Hu, Weiming; Allisany, Art; McBurnie, MaryAnn; Kurtz, Stephen E; Hazlehurst, Brian L

2014-01-01

Comparative effectiveness research (CER) studies involving multiple institutions with diverse electronic health records (EHRs) depend on high quality data. To ensure uniformity of data derived from different EHR systems and implementations, the CER Hub informatics platform developed a quality assurance (QA) process using tools and data formats available through the CER Hub. The QA process, implemented here in a study of smoking cessation services in primary care, used the 'emrAdapter' tool programmed with a set of quality checks to query large samples of primary care encounter records extracted in accord with the CER Hub common data framework. The tool, deployed to each study site, generated error reports indicating data problems to be fixed locally and aggregate data sharable with the central site for quality review. Across the CER Hub network of six health systems, data completeness and correctness issues were prevalent in the first iteration and were considerably improved after three iterations of the QA process. A common issue encountered was incomplete mapping of local EHR data values to those defined by the common data framework. A highly automated and distributed QA process helped to ensure the correctness and completeness of patient care data extracted from EHRs for a multi-institution CER study in smoking cessation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Multi-bunch feedback systems

CERN Document Server

Lonza, M

2008-01-01

Coupled-bunch instabilities excited by the interaction of the particle beam with its surroundings can seriously limit the performance of circular particle accelerators. These instabilities can be cured by the use of active feedback systems based on sensors capable of detecting the unwanted beam motion and actuators that apply the feedback correction to the beam. The advances in electronic technology now allow the implementation of feedback loops using programmable digital systems. Besides important advantages in terms of flexibility and reproducibility, digital systems open the way to the use of novel diagnostic tools and additional features. The lecture will first introduce coupled-bunch instabilities analysing the equation of motion of charged particles and the different modes of oscillation of a multi-bunch beam, showing how they can be observed and measured. Different types of feedbacks systems will then be presented as examples of real implementations that belong to the history of multi-bunch feedback sy...

Multi-channel data acquisition system for CT

International Nuclear Information System (INIS)

Cao Fuqiang; He Bin; Liu Guohua; Xu Minjian

2009-01-01

The architecture design and realization of a data acquisition system for multi-channel CT is described. The article introduces the conversion of analog signal to digital signal, the data cache and transmission. This data acquisition system can be widely used in the system which requires the multi-channel, weak current signal detection. (authors)

Demonstration of SLUMIS: a clinical database and management information system for a multi organ transplant program.

OpenAIRE

Kurtz, M.; Bennett, T.; Garvin, P.; Manuel, F.; Williams, M.; Langreder, S.

1991-01-01

Because of the rapid evolution of the heart, heart/lung, liver, kidney and kidney/pancreas transplant programs at our institution, and because of a lack of an existing comprehensive database, we were required to develop a computerized management information system capable of supporting both clinical and research requirements of a multifaceted transplant program. SLUMIS (ST. LOUIS UNIVERSITY MULTI-ORGAN INFORMATION SYSTEM) was developed for the following reasons: 1) to comply with the reportin...

Implementation method of multi-terminal DC control system

Science.gov (United States)

Yi, Liu; Hao-Ran, Huang; Jun-Wen, Zhou; Hong-Guang, Guo; Yu-Yong, Zhou

2018-04-01

Currently the multi-terminal DC system (MTDC) has more stations. Each station needs operators to monitor and control the device. It needs much more operation and maintenance, low efficiency and small reliability; for the most important reason, multi-terminal DC system has complex control mode. If one of the stations has some problem, the control of the whole system should have problems. According to research of the characteristics of multi-terminal DC (VSC-MTDC) systems, this paper presents a strong implementation of the multi-terminal DC Supervisory Control and Data Acquisition (SCADA) system. This system is intelligent, can be networking, integration and intelligent. A master control system is added in each station to communication with the other stations to send current and DC voltage value to pole control system for each station. Based on the practical application and information feedback in the China South Power Grid research center VSC-MTDC project, this system is higher efficiency and save the cost on the maintenance of convertor station to improve the intelligent level and comprehensive effect. And because of the master control system, a multi-terminal system hierarchy coordination control strategy is formed, this make the control and protection system more efficiency and reliability.

Audiovisual biofeedback breathing guidance for lung cancer patients receiving radiotherapy: a multi-institutional phase II randomised clinical trial.

Science.gov (United States)

Pollock, Sean; O'Brien, Ricky; Makhija, Kuldeep; Hegi-Johnson, Fiona; Ludbrook, Jane; Rezo, Angela; Tse, Regina; Eade, Thomas; Yeghiaian-Alvandi, Roland; Gebski, Val; Keall, Paul J

2015-07-18

There is a clear link between irregular breathing and errors in medical imaging and radiation treatment. The audiovisual biofeedback system is an advanced form of respiratory guidance that has previously demonstrated to facilitate regular patient breathing. The clinical benefits of audiovisual biofeedback will be investigated in an upcoming multi-institutional, randomised, and stratified clinical trial recruiting a total of 75 lung cancer patients undergoing radiation therapy. To comprehensively perform a clinical evaluation of the audiovisual biofeedback system, a multi-institutional study will be performed. Our methodological framework will be based on the widely used Technology Acceptance Model, which gives qualitative scales for two specific variables, perceived usefulness and perceived ease of use, which are fundamental determinants for user acceptance. A total of 75 lung cancer patients will be recruited across seven radiation oncology departments across Australia. Patients will be randomised in a 2:1 ratio, with 2/3 of the patients being recruited into the intervention arm and 1/3 in the control arm. 2:1 randomisation is appropriate as within the interventional arm there is a screening procedure where only patients whose breathing is more regular with audiovisual biofeedback will continue to use this system for their imaging and treatment procedures. Patients within the intervention arm whose free breathing is more regular than audiovisual biofeedback in the screen procedure will remain in the intervention arm of the study but their imaging and treatment procedures will be performed without audiovisual biofeedback. Patients will also be stratified by treating institution and for treatment intent (palliative vs. radical) to ensure similar balance in the arms across the sites. Patients and hospital staff operating the audiovisual biofeedback system will complete questionnaires to assess their experience with audiovisual biofeedback. The objectives of this

Audiovisual biofeedback breathing guidance for lung cancer patients receiving radiotherapy: a multi-institutional phase II randomised clinical trial

International Nuclear Information System (INIS)

Pollock, Sean; O’Brien, Ricky; Makhija, Kuldeep; Hegi-Johnson, Fiona; Ludbrook, Jane; Rezo, Angela; Tse, Regina; Eade, Thomas; Yeghiaian-Alvandi, Roland; Gebski, Val; Keall, Paul J

2015-01-01

There is a clear link between irregular breathing and errors in medical imaging and radiation treatment. The audiovisual biofeedback system is an advanced form of respiratory guidance that has previously demonstrated to facilitate regular patient breathing. The clinical benefits of audiovisual biofeedback will be investigated in an upcoming multi-institutional, randomised, and stratified clinical trial recruiting a total of 75 lung cancer patients undergoing radiation therapy. To comprehensively perform a clinical evaluation of the audiovisual biofeedback system, a multi-institutional study will be performed. Our methodological framework will be based on the widely used Technology Acceptance Model, which gives qualitative scales for two specific variables, perceived usefulness and perceived ease of use, which are fundamental determinants for user acceptance. A total of 75 lung cancer patients will be recruited across seven radiation oncology departments across Australia. Patients will be randomised in a 2:1 ratio, with 2/3 of the patients being recruited into the intervention arm and 1/3 in the control arm. 2:1 randomisation is appropriate as within the interventional arm there is a screening procedure where only patients whose breathing is more regular with audiovisual biofeedback will continue to use this system for their imaging and treatment procedures. Patients within the intervention arm whose free breathing is more regular than audiovisual biofeedback in the screen procedure will remain in the intervention arm of the study but their imaging and treatment procedures will be performed without audiovisual biofeedback. Patients will also be stratified by treating institution and for treatment intent (palliative vs. radical) to ensure similar balance in the arms across the sites. Patients and hospital staff operating the audiovisual biofeedback system will complete questionnaires to assess their experience with audiovisual biofeedback. The objectives of this

Reliability of diffusion-weighted imaging in acute ischemic stroke. A multi-institutional multivendor validation study

International Nuclear Information System (INIS)

Sasaki, Makoto; Yamada, Kei; Watanabe, Yoshiyuki; Matsui, Mieko; Ida, Masahiro

2006-01-01

Diffusion-weighted imaging (DWI) is widely applied for evaluating patients with acute ischemic stroke. However, its display conditions are different among institutions, and reliability of the apparent diffusion coefficient (ADC) has not been validated enough. Recently, we proposed an easy-to-use technique to standardize display conditions, in which window width and level are normalized by the signal intensity of brain tissue on b0 images. We carried out a multi-institutional multivendor study, and revealed that the technique successfully minimized difference in the display condition among institutions and vendors. On the other hand, we found that the ADC value is significantly different among vendors and static magnetic fields, suggesting that the ADC should be evaluated semiquantitatively. Standardization and technical advancement are considered to be necessary to improve reliability of DWI in acute stroke managements. (author)

Multi-echelon systems : a service measure perspective

NARCIS (Netherlands)

Diks, E.B.; Kok, de A.G.; Lagodimos, A.G.

1996-01-01

This paper reviews the most important results on divergent multi-echelon systems. In particular, we concentrate on the interactions between the elements that constitute such a multi-echelon system, in order to determine several service measures (e.g. external customer service level and inventory

The Institutional System of Economic Agents’ Social Responsibility

Directory of Open Access Journals (Sweden)

Frolova Elena, A.

2015-12-01

Full Text Available In this paper it was made an attempt to analyse the main characteristics of the institutional system of economic agents social responsibility. The institutional system can be described as a complex of norms, rules, regulations and enforcement mechanisms in the context of interactions and communications of economic agents. The institutional nature of social responsibility allow to solve social dilemmas through the internalization of social responsibility norms and creating social value orientations, which are determine the prosocial behaviour of economic agents. The institutional system of social responsibility was described from the methodological institutionalism point of view. Analysing this phenomenon we are required to develop research on the objects of this system (norms, regulations, behaviour, on the subjects of this system (persons, business, government and on the institutional mechanisms (internalization of social responsibility norms, promoting prosocial behaviour, adaptation and transformation of the social responsibility norms aimed to ensure the understanding of origin and significance of social responsibility for modern society.

Multi-disciplinary coupling for integrated design of propulsion systems

Science.gov (United States)

Chamis, C. C.; Singhal, S. N.

1993-01-01

Effective computational simulation procedures are described for modeling the inherent multi-disciplinary interactions for determining the true response of propulsion systems. Results are presented for propulsion system responses including multi-discipline coupling effects via (1) coupled multi-discipline tailoring, (2) an integrated system of multidisciplinary simulators, (3) coupled material-behavior/fabrication-process tailoring, (4) sensitivities using a probabilistic simulator, and (5) coupled materials/structures/fracture/probabilistic behavior simulator. The results show that the best designs can be determined if the analysis/tailoring methods account for the multi-disciplinary coupling effects. The coupling across disciplines can be used to develop an integrated interactive multi-discipline numerical propulsion system simulator.

Microphysics in Multi-scale Modeling System with Unified Physics

Science.gov (United States)

Tao, Wei-Kuo

2012-01-01

Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (1) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, a review of developments and applications of the multi-scale modeling system will be presented. In particular, the microphysics development and its performance for the multi-scale modeling system will be presented.

Multi-core fiber undersea transmission systems

DEFF Research Database (Denmark)

Nooruzzaman, Md; Morioka, Toshio

2017-01-01

Various potential architectures of branching units for multi-core fiber undersea transmission systems are presented. It is also investigated how different architectures of branching unit influence the number of fibers and those of inline components.......Various potential architectures of branching units for multi-core fiber undersea transmission systems are presented. It is also investigated how different architectures of branching unit influence the number of fibers and those of inline components....

Optimal Multi-Level Lot Sizing for Requirements Planning Systems

OpenAIRE

Earle Steinberg; H. Albert Napier

1980-01-01

The wide spread use of advanced information systems such as Material Requirements Planning (MRP) has significantly altered the practice of dependent demand inventory management. Recent research has focused on development of multi-level lot sizing heuristics for such systems. In this paper, we develop an optimal procedure for the multi-period, multi-product, multi-level lot sizing problem by modeling the system as a constrained generalized network with fixed charge arcs and side constraints. T...

Recent Advances in System Reliability Signatures, Multi-state Systems and Statistical Inference

CERN Document Server

Frenkel, Ilia

2012-01-01

Recent Advances in System Reliability discusses developments in modern reliability theory such as signatures, multi-state systems and statistical inference. It describes the latest achievements in these fields, and covers the application of these achievements to reliability engineering practice. The chapters cover a wide range of new theoretical subjects and have been written by leading experts in reliability theory and its applications.  The topics include: concepts and different definitions of signatures (D-spectra),  their  properties and applications  to  reliability of coherent systems and network-type structures; Lz-transform of Markov stochastic process and its application to multi-state system reliability analysis; methods for cost-reliability and cost-availability analysis of multi-state systems; optimal replacement and protection strategy; and statistical inference. Recent Advances in System Reliability presents many examples to illustrate the theoretical results. Real world multi-state systems...

Multi-bunch Feedback Systems

International Nuclear Information System (INIS)

Lonza, M; Schmickler, H

2014-01-01

Coupled-bunch instabilities excited by the interaction of the particle beam with its surroundings can seriously limit the performance of circular particle accelerators. These instabilities can be cured by the use of active feedback systems based on sensors capable of detecting the unwanted beam motion and actuators that apply the feedback correction to the beam. Advances in electronic technology now allow the implementation of feedback loops using programmable digital systems. Besides important advantages in terms of flexibility and reproducibility, digital systems open the way to the use of novel diagnostic tools and additional features. We first introduce coupled-bunch instabilities, analysing the equation of motion of charged particles and the different modes of oscillation of a multi-bunch beam, showing how they can be observed and measured. Different types of feedback systems will then be presented as examples of real implementations that belong to the history of multi-bunch feedback systems. The main components of a feedback system and the related issues will also be analysed. Finally, we shall focus on digital feedback systems, their characteristics, and features, as well as on how they can be concretely exploited for both the optimization of feedback performance and for beam dynamics studies

Making sense of enterprise systems in institutions

DEFF Research Database (Denmark)

Svejvig, Per; Jensen, Tina Blegind

2013-01-01

Whereas previous research provides a number of accounts of failure prone enterprise system (ES) implementations, empirical evidence of the re-implementation of an accounting system in a Scandinavian high-tech company shows how the system became highly integrated, accepted by its users, and well......-aligned to the work processes. To learn from this case study, we investigate the interactive and dynamic relationships among the enterprise system, people and institutional properties. We investigate the institutional structures and the sensemaking processes at play to identify how the idea of an efficient accounting...... system travelled from a national to a local level, how the system moved from being highly customized to becoming a standard package and how the users’ enactment of the system reinforced existing institutional practices. Based on the findings, we frame our contributions into five lessons learned: (1...

Multi-spectral CCD camera system for ocean water color and seacoast observation

Science.gov (United States)

Zhu, Min; Chen, Shiping; Wu, Yanlin; Huang, Qiaolin; Jin, Weiqi

2001-10-01

One of the earth observing instruments on HY-1 Satellite which will be launched in 2001, the multi-spectral CCD camera system, is developed by Beijing Institute of Space Mechanics & Electricity (BISME), Chinese Academy of Space Technology (CAST). In 798 km orbit, the system can provide images with 250 m ground resolution and a swath of 500 km. It is mainly used for coast zone dynamic mapping and oceanic watercolor monitoring, which include the pollution of offshore and coast zone, plant cover, watercolor, ice, terrain underwater, suspended sediment, mudflat, soil and vapor gross. The multi- spectral camera system is composed of four monocolor CCD cameras, which are line array-based, 'push-broom' scanning cameras, and responding for four spectral bands. The camera system adapts view field registration; that is, each camera scans the same region at the same moment. Each of them contains optics, focal plane assembly, electrical circuit, installation structure, calibration system, thermal control and so on. The primary features on the camera system are: (1) Offset of the central wavelength is better than 5 nm; (2) Degree of polarization is less than 0.5%; (3) Signal-to-noise ratio is about 1000; (4) Dynamic range is better than 2000:1; (5) Registration precision is better than 0.3 pixel; (6) Quantization value is 12 bit.

Multi-disciplinary coupling effects for integrated design of propulsion systems

Science.gov (United States)

Chamis, C. C.; Singhal, S. N.

1993-01-01

Effective computational simulation procedures are described for modeling the inherent multi-disciplinary interactions which govern the accurate response of propulsion systems. Results are presented for propulsion system responses including multi-disciplinary coupling effects using coupled multi-discipline thermal, structural, and acoustic tailoring; an integrated system of multi-disciplinary simulators; coupled material behavior/fabrication process tailoring; sensitivities using a probabilistic simulator; and coupled materials, structures, fracture, and probabilistic behavior simulator. The results demonstrate that superior designs can be achieved if the analysis/tailoring methods account for the multi-disciplinary coupling effects. The coupling across disciplines can be used to develop an integrated coupled multi-discipline numerical propulsion system simulator.

A Multi-Model Approach for System Diagnosis

DEFF Research Database (Denmark)

Niemann, Hans Henrik; Poulsen, Niels Kjølstad; Bækgaard, Mikkel Ask Buur

2007-01-01

A multi-model approach for system diagnosis is presented in this paper. The relation with fault diagnosis as well as performance validation is considered. The approach is based on testing a number of pre-described models and find which one is the best. It is based on an active approach......,i.e. an auxiliary input to the system is applied. The multi-model approach is applied on a wind turbine system....

IMPROVING MANAGEMENT INFORMATION SYSTEMS AT A HIGHER EDUCATIONAL INSTITUTION

Directory of Open Access Journals (Sweden)

Nataliya N. Fedyakova

2016-06-01

Full Text Available Introduction: this paper deals with the foreign and domestic experience of creation and use of educational institution management automation systems. The problems of higher educational institutions management are essential in conditions of growing competition between educational institutions. Their complexity and timeliness defines multifunctional activity of higher educational institutions, diversity of funding sources, the variety of forms and types of educational, scientific, industrial and economic activities, the need for monitoring of the market of educational services and the labor market (including the need for employment of graduates, the necessity for adaptation to continuously changing economic conditions. Materials and Methods: system approach and method of comparison were used in analysing the current state of development and organisation of the automated information systems of higher education. These methods were also used to compare the qualitative characteristics of different technologies and methods of creation of the automated information systems. Results: the foreign and domestic educational institution management automation systems SIMS. net, Capita Education, SPRUT, Galaxy of Higher Educational Institution Management”, and “GSVedomosty” were analysed. Disadvantages of the functional module AIS – AWP pertaining to the University Rector of the higher educational institution were found. The improvement of higher educational institution AIS by implementing decision support systems for the management, made on the basis of the model of SaaS (software as a service is discussed. The author developed a model of automated score-rating system to assess the individual performance of students. Discussion and Conclusions: the author tackles the problems of higher educational institution AIS taking into account the specifics of the use of higher educational institution management information systems. They have a practical

The Goddard multi-scale modeling system with unified physics

Directory of Open Access Journals (Sweden)

W.-K. Tao

2009-08-01

Full Text Available Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (1 a cloud-resolving model (CRM, (2 a regional-scale model, the NASA unified Weather Research and Forecasting Model (WRF, and (3 a coupled CRM-GCM (general circulation model, known as the Goddard Multi-scale Modeling Framework or MMF. The same cloud-microphysical processes, long- and short-wave radiative transfer and land-surface processes are applied in all of the models to study explicit cloud-radiation and cloud-surface interactive processes in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator for comparison and validation with NASA high-resolution satellite data.

This paper reviews the development and presents some applications of the multi-scale modeling system, including results from using the multi-scale modeling system to study the interactions between clouds, precipitation, and aerosols. In addition, use of the multi-satellite simulator to identify the strengths and weaknesses of the model-simulated precipitation processes will be discussed as well as future model developments and applications.

Development of MARS for multi-dimensional and multi-purpose thermal-hydraulic system analysis

Energy Technology Data Exchange (ETDEWEB)

Lee, Won Jae; Chung, Bub Dong; Kim, Kyung Doo; Hwang, Moon Kyu; Jeong, Jae Jun; Ha, Kwi Seok; Joo, Han Gyu [Korea Atomic Energy Research Institute, T/H Safety Research Team, Yusung, Daejeon (Korea)

2000-10-01

MARS (Multi-dimensional Analysis of Reactor Safety) code is being developed by KAERI for the realistic thermal-hydraulic simulation of light water reactor system transients. MARS 1.4 has been developed as a final version of basic code frame for the multi-dimensional analysis of system thermal-hydraulics. Since MARS 1.3, MARS 1.4 has been improved to have the enhanced code capability and user friendliness through the unification of input/output features, code models and code functions, and through the code modernization. Further improvements of thermal-hydraulic models, numerical method and user friendliness are being carried out for the enhanced code accuracy. As a multi-purpose safety analysis code system, a coupled analysis system, MARS/MASTER/CONTEMPT, has been developed using multiple DLL (Dynamic Link Library) techniques of Windows system. This code system enables the coupled, that is, more realistic analysis of multi-dimensional thermal-hydraulics (MARS 2.0), three-dimensional core kinetics (MASTER) and containment thermal-hydraulics (CONTEMPT). This paper discusses the MARS development program, and the developmental progress of the MARS 1.4 and the MARS/MASTER/CONTEMPT focusing on major features of the codes and their verification. It also discusses thermal hydraulic models and new code features under development. (author)

Development of MARS for multi-dimensional and multi-purpose thermal-hydraulic system analysis

International Nuclear Information System (INIS)

Lee, Won Jae; Chung, Bub Dong; Kim, Kyung Doo; Hwang, Moon Kyu; Jeong, Jae Jun; Ha, Kwi Seok; Joo, Han Gyu

2000-01-01

MARS (Multi-dimensional Analysis of Reactor Safety) code is being developed by KAERI for the realistic thermal-hydraulic simulation of light water reactor system transients. MARS 1.4 has been developed as a final version of basic code frame for the multi-dimensional analysis of system thermal-hydraulics. Since MARS 1.3, MARS 1.4 has been improved to have the enhanced code capability and user friendliness through the unification of input/output features, code models and code functions, and through the code modernization. Further improvements of thermal-hydraulic models, numerical method and user friendliness are being carried out for the enhanced code accuracy. As a multi-purpose safety analysis code system, a coupled analysis system, MARS/MASTER/CONTEMPT, has been developed using multiple DLL (Dynamic Link Library) techniques of Windows system. This code system enables the coupled, that is, more realistic analysis of multi-dimensional thermal-hydraulics (MARS 2.0), three-dimensional core kinetics (MASTER) and containment thermal-hydraulics (CONTEMPT). This paper discusses the MARS development program, and the developmental progress of the MARS 1.4 and the MARS/MASTER/CONTEMPT focusing on major features of the codes and their verification. It also discusses thermal hydraulic models and new code features under development. (author)

Adaptive fuzzy sliding-mode control for multi-input multi-output chaotic systems

International Nuclear Information System (INIS)

Poursamad, Amir; Markazi, Amir H.D.

2009-01-01

This paper describes an adaptive fuzzy sliding-mode control algorithm for controlling unknown or uncertain, multi-input multi-output (MIMO), possibly chaotic, dynamical systems. The control approach encompasses a fuzzy system and a robust controller. The fuzzy system is designed to mimic an ideal sliding-mode controller, and the robust controller compensates the difference between the fuzzy controller and the ideal one. The parameters of the fuzzy system, as well as the uncertainty bound of the robust controller, are tuned adaptively. The adaptive laws are derived in the Lyapunov sense to guarantee the asymptotic stability and tracking of the controlled system. The effectiveness of the proposed method is shown by applying it to some well-known chaotic systems.

Improving Multi-Agent Systems Using Jason

DEFF Research Database (Denmark)

Vester, Steen; Boss, Niklas Skamriis; Jensen, Andreas Schmidt

2011-01-01

We describe the approach used to develop the multi-agent system of herders that competed as the Jason-DTU team at the Multi-Agent Programming Contest 2010. We also participated in 2009 with a system developed in the agentoriented programming language Jason which is an extension of AgentSpeak. We ...... used the implementation from 2009 as a foundation and therefore much of the work done this year was on improving that implementation. We present a description which includes design and analysis of the system as well as the main features of our agent team strategy. In addition we discuss...

Revealing dynamics and consequences of fit and misfit between formal and informal networks in multi-institutional product development collaborations

NARCIS (Netherlands)

Kratzer, J.; Gemuenden, Hans G.; Lettl, Christopher

The study presents a longitudinal examination about dynamics and consequences of fit and misfit between formally ascribed design interfaces and informal communication networks in two large multi-institutional product development collaborations in space industry. Findings: (1) formally ascribed

A survey of informatics platforms that enable distributed comparative effectiveness research using multi-institutional heterogenous clinical data.

Science.gov (United States)

Sittig, Dean F; Hazlehurst, Brian L; Brown, Jeffrey; Murphy, Shawn; Rosenman, Marc; Tarczy-Hornoch, Peter; Wilcox, Adam B

2012-07-01

Comparative effectiveness research (CER) has the potential to transform the current health care delivery system by identifying the most effective medical and surgical treatments, diagnostic tests, disease prevention methods, and ways to deliver care for specific clinical conditions. To be successful, such research requires the identification, capture, aggregation, integration, and analysis of disparate data sources held by different institutions with diverse representations of the relevant clinical events. In an effort to address these diverse demands, there have been multiple new designs and implementations of informatics platforms that provide access to electronic clinical data and the governance infrastructure required for interinstitutional CER. The goal of this manuscript is to help investigators understand why these informatics platforms are required and to compare and contrast 6 large-scale, recently funded, CER-focused informatics platform development efforts. We utilized an 8-dimension, sociotechnical model of health information technology to help guide our work. We identified 6 generic steps that are necessary in any distributed, multi-institutional CER project: data identification, extraction, modeling, aggregation, analysis, and dissemination. We expect that over the next several years these projects will provide answers to many important, and heretofore unanswerable, clinical research questions.

Overcoming Barriers to Public Engagement through a Multi-Institution Consortium

Science.gov (United States)

Lambert, K. F.; Weiss, M.; Garlick, S.

2016-12-01

A growing body of evidence suggests that public engagement with science (PES) can enhance the relevance and impact of science on society. At the same time, advances in our understanding of public engagement suggest that greater skills, resources, and time horizons are often required to create effective programs. Consequently, despite a proliferation of training programs, many scientists still face the challenge of balancing the demands of public engagement with the requirements of their disciplinary research. Novel institutions are emerging that bring together interdisciplinary networks of principle investigators with PES practitioners to overcome barriers to effective and sustained public engagement in the environmental sciences. We will use the Science Policy Exchange (SPE), a consortium housed at the Harvard Forest, Harvard University, to illustrate how PIs and PES practitioners can collaborate to design public engagement processes, conduct policy-relevant scientific syntheses, and implement science communication strategies. Results from two SPE case studies demonstrate how multi-institutional consortia can help scientists overcome barriers such as lack of knowledge of evidence-based PES approaches, limits on time and funding to implement PES projects, and the need to integrate PES activities with research. The case studies also show how SPE strives to achieve credibility, saliency, and legitimacy in different public policy contexts: (1) engagement between scientists and local stakeholders to develop scenarios of landscape change; and (2) engagement between scientists and policy makers to understand the relationship between power plant emission standards, and air quality, human health and ecosystem function. The presentation will conclude with examples of how SPE programs have led to institutional change (staffing and budget), cultural change (attitudes and expectations of senior leaders), and research change (development of research questions, funding proposals

THE IMPORTANCE OF INFORMATION SYSTEMS IN THE MANAGEMENT AND PROCESSING OF LARGE DATA VOLUMES IN PUBLIC INSTITUTIONS

Directory of Open Access Journals (Sweden)

CARINA-ELENA STEGĂROIU

2016-12-01

multi-criteria analysis and time series by creating a specialised computer system and one that is also integrated with the information system of the Ministry of Finance. The objective of this paper is to analyze the importance of such a system in the management and processing of large volumes of data in public institutions.1

5 CFR 4101.105 - Purchase of System institution assets.

Science.gov (United States)

2010-01-01

... ETHICAL CONDUCT FOR EMPLOYEES OF THE FARM CREDIT ADMINISTRATION § 4101.105 Purchase of System institution assets. (a) Prohibition on purchasing assets owned by a System institution. No covered employee, or... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Purchase of System institution assets...

Multi-agent systems simulation and applications

CERN Document Server

Uhrmacher, Adelinde M

2009-01-01

Methodological Guidelines for Modeling and Developing MAS-Based SimulationsThe intersection of agents, modeling, simulation, and application domains has been the subject of active research for over two decades. Although agents and simulation have been used effectively in a variety of application domains, much of the supporting research remains scattered in the literature, too often leaving scientists to develop multi-agent system (MAS) models and simulations from scratch. Multi-Agent Systems: Simulation and Applications provides an overdue review of the wide ranging facets of MAS simulation, i

Mathematical model comparing of the multi-level economics systems

Science.gov (United States)

Brykalov, S. M.; Kryanev, A. V.

2017-12-01

The mathematical model (scheme) of a multi-level comparison of the economic system, characterized by the system of indices, is worked out. In the mathematical model of the multi-level comparison of the economic systems, the indicators of peer review and forecasting of the economic system under consideration can be used. The model can take into account the uncertainty in the estimated values of the parameters or expert estimations. The model uses the multi-criteria approach based on the Pareto solutions.

Generation of multi-wing chaotic attractor in fractional order system

International Nuclear Information System (INIS)

Zhang Chaoxia; Yu Simin

2011-01-01

Highlights: → We investigate a novel approach for generating multi-wing chaotic attractors. → We introduce a fundamental fractional differential nominal linear system. → A proper nonlinear state feedback controller is designed. → The controlled system can generate fractional-order multi-wing chaotic attractors. - Abstract: In this paper, a novel approach is proposed for generating multi-wing chaotic attractors from the fractional linear differential system via nonlinear state feedback controller equipped with a duality-symmetric multi-segment quadratic function. The main idea is to design a proper nonlinear state feedback controller by using four construction criterions from a fundamental fractional differential nominal linear system, so that the controlled fractional differential system can generate multi-wing chaotic attractors. It is the first time in the literature to report the multi-wing chaotic attractors from an uncoupled fractional differential system. Furthermore, some basic dynamical analysis and numerical simulations are also given, confirming the effectiveness of the proposed method.

Multi-Objective Scheduling Optimization Based on a Modified Non-Dominated Sorting Genetic Algorithm-II in Voltage Source Converter−Multi-Terminal High Voltage DC Grid-Connected Offshore Wind Farms with Battery Energy Storage Systems

Directory of Open Access Journals (Sweden)

Ho-Young Kim

2017-07-01

Full Text Available Improving the performance of power systems has become a challenging task for system operators in an open access environment. This paper presents an optimization approach for solving the multi-objective scheduling problem using a modified non-dominated sorting genetic algorithm in a hybrid network of meshed alternating current (AC/wind farm grids. This approach considers voltage and power control modes based on multi-terminal voltage source converter high-voltage direct current (MTDC and battery energy storage systems (BESS. To enhance the hybrid network station performance, we implement an optimal process based on the battery energy storage system operational strategy for multi-objective scheduling over a 24 h demand profile. Furthermore, the proposed approach is formulated as a master problem and a set of sub-problems associated with the hybrid network station to improve the overall computational efficiency using Benders’ decomposition. Based on the results of the simulations conducted on modified institute of electrical and electronics engineers (IEEE-14 bus and IEEE-118 bus test systems, we demonstrate and confirm the applicability, effectiveness and validity of the proposed approach.

General principles of institutional risks influence on pension systems

Science.gov (United States)

Nepp, A. N.; Shilkov, A. A.; Sheveleva, A. Y.; Mamedbakov, M. R.

2016-12-01

This paper examines the tools used to study the influence of institutional factors on investment returns. The research object are the tools used in the evaluation of institutional risks in the pension system, in particular, the correlation model of factors impacting on the `anti-director' index, econometric estimates combining the different determinants of savings, the model of endogenous institutional change, etc. Research work focusing on issues of institutional factors affecting pension systems (authored by La Porta, Guiso, Gianetti, El-Mekkaouide Freitas, Neyapti B., and others) is reviewed. The model is examined in terms of the impact of institutional risks on pension systems, especially with regard to the funded part. The study identified the following factors that affect financial institutions, including pension institutions: management quality, regulation quality, rule of law, political stability, and corruption control.

Model-Checking of Linear-Time Properties in Multi-Valued Systems

OpenAIRE

Li, Yongming; Droste, Manfred; Lei, Lihui

2012-01-01

In this paper, we study model-checking of linear-time properties in multi-valued systems. Safety property, invariant property, liveness property, persistence and dual-persistence properties in multi-valued logic systems are introduced. Some algorithms related to the above multi-valued linear-time properties are discussed. The verification of multi-valued regular safety properties and multi-valued $\\omega$-regular properties using lattice-valued automata are thoroughly studied. Since the law o...

Hand hygiene and healthcare system change within multi-modal promotion: a narrative review.

Science.gov (United States)

Allegranzi, B; Sax, H; Pittet, D

2013-02-01

Many factors may influence the level of compliance with hand hygiene recommendations by healthcare workers. Lack of products and facilities as well as their inappropriate and non-ergonomic location represent important barriers. Targeted actions aimed at making hand hygiene practices feasible during healthcare delivery by ensuring that the necessary infrastructure is in place, defined as 'system change', are essential to improve hand hygiene in healthcare. In particular, access to alcohol-based hand rubs (AHRs) enables appropriate and timely hand hygiene performance at the point of care. The feasibility and impact of system change within multi-modal strategies have been demonstrated both at institutional level and on a large scale. The introduction of AHRs overcomes some important barriers to best hand hygiene practices and is associated with higher compliance, especially when integrated within multi-modal strategies. Several studies demonstrated the association between AHR consumption and reduction in healthcare-associated infection, in particular, meticillin-resistant Staphylococcus aureus bacteraemia. Recent reports demonstrate the feasibility and success of system change implementation on a large scale. The World Health Organization and other investigators have reported the challenges and encouraging results of implementing hand hygiene improvement strategies, including AHR introduction, in settings with limited resources. This review summarizes the available evidence demonstrating the need for system change and its importance within multi-modal hand hygiene improvement strategies. This topic is also discussed in a global perspective and highlights some controversial issues. Copyright © 2013 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Optimization of multi-branch switched diversity systems

KAUST Repository

Nam, Haewoon

2009-10-01

A performance optimization based on the optimal switching threshold(s) for a multi-branch switched diversity system is discussed in this paper. For the conventional multi-branch switched diversity system with a single switching threshold, the optimal switching threshold is a function of both the average channel SNR and the number of diversity branches, where computing the optimal switching threshold is not a simple task when the number of diversity branches is high. The newly proposed multi-branch switched diversity system is based on a sequence of switching thresholds, instead of a single switching threshold, where a different diversity branch uses a different switching threshold for signal comparison. Thanks to the fact that each switching threshold in the sequence can be optimized only based on the number of the remaining diversity branches, the proposed system makes it easy to find these switching thresholds. Furthermore, some selected numerical and simulation results show that the proposed switched diversity system with the sequence of optimal switching thresholds outperforms the conventional system with the single optimal switching threshold. © 2009 IEEE.

Diffusion trajectory of self-propagating innovations interacting with institutions-incorporation of multi-factors learning function to model PV diffusion in Japan

International Nuclear Information System (INIS)

Nagamatsu, Akira; Watanabe, Chihiro; Shum, Kwok L.

2006-01-01

This paper first proposes a modeling framework to study diffusion of innovations which exhibit strong interaction with the institution systems across which they diffuse. A unique character of such generic innovation is that specific applications are continually developed during its diffusion. This self-propagation in continual applications generation, which is dependent upon the cumulative installed base of the technological innovation, can be modeled to lead to a dynamic changing carrying capacity in an otherwise simple logistic diffusion curve. The cumulative installed base is dependent upon the price of technology and the cost learning dynamics. This paper utilizes a multi-factors learning function to represent such learning dynamics. Empirical estimates from our model are compared with those from other logistics curve formulations and are shown to better fit the annual PV production data during the past quarter century in the case of Japan. The very fact that the potential of this class of innovation can be leveraged only if it interacts closely with the institution highlights the importance of institutional determinants of adoption and diffusion of such innovations like PV. We therefore attempt to put forward an institutional framework, based on viewing PV as a technology platform, to consider PV diffusion beyond mathematical and empirical modeling. Some future research directions are also proposed. (author)

Parallel Computational Intelligence-Based Multi-Camera Surveillance System

Directory of Open Access Journals (Sweden)

Sergio Orts-Escolano

2014-04-01

Full Text Available In this work, we present a multi-camera surveillance system based on the use of self-organizing neural networks to represent events on video. The system processes several tasks in parallel using GPUs (graphic processor units. It addresses multiple vision tasks at various levels, such as segmentation, representation or characterization, analysis and monitoring of the movement. These features allow the construction of a robust representation of the environment and interpret the behavior of mobile agents in the scene. It is also necessary to integrate the vision module into a global system that operates in a complex environment by receiving images from multiple acquisition devices at video frequency. Offering relevant information to higher level systems, monitoring and making decisions in real time, it must accomplish a set of requirements, such as: time constraints, high availability, robustness, high processing speed and re-configurability. We have built a system able to represent and analyze the motion in video acquired by a multi-camera network and to process multi-source data in parallel on a multi-GPU architecture.

Regional climate response collaboratives: Multi-institutional support for climate resilience

Science.gov (United States)

Averyt, Kristen; Derner, Justin D.; Dilling, Lisa; Guerrero, Rafael; Joyce, Linda A.; McNeeley, Shannon; McNie, Elizabeth; Morisette, Jeffrey T.; Ojima, Dennis; O'Malley, Robin; Peck, Dannele; Ray, Andrea J.; Reeves, Matt; Travis, William

2018-01-01

Federal investments by U.S. agencies to enhance climate resilience at regional scales grew over the past decade (2010s). To maximize efficiency and effectiveness in serving multiple sectors and scales, it has become critical to leverage existing agency-specific research, infrastructure, and capacity while avoiding redundancy. We discuss lessons learned from a multi-institutional “regional climate response collaborative” that comprises three different federally-supported climate service entities in the Rocky Mountain west and northern plains region. These lessons include leveraging different strengths of each partner, creating deliberate mechanisms to increase cross-entity communication and joint ownership of projects, and placing a common priority on stakeholder-relevant research and outcomes. We share the conditions that fostered successful collaboration, which can be transferred elsewhere, and suggest mechanisms for overcoming potential barriers. Synergies are essential for producing actionable research that informs climate-related decisions for stakeholders and ultimately enhances climate resilience at regional scales.

FY1995 distributed control of man-machine cooperative multi agent systems; 1995 nendo ningen kyochogata multi agent kikai system no jiritsu seigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

In the near future, distributed autonomous systems will be practical in many situations, e.g., interactive production systems, hazardous environments, nursing homes, and individual houses. The agents which consist of the distributed system must not give damages to human being and should be working economically. In this project man-machine cooperative multi agent systems are studied in many kind of respects, and basic design technology, basic control technique are developed by establishing fundamental theories and by constructing experimental systems. In this project theoretical and experimental studies are conducted in the following sub-projects: (1) Distributed cooperative control in multi agent type actuation systems (2) Control of non-holonomic systems (3) Man-machine Cooperative systems (4) Robot systems learning human skills (5) Robust force control of constrained systems In each sub-project cooperative nature between machine agent systems and human being, interference between artificial multi agents and environment and new function emergence in coordination of the multi agents and the environment, robust force control against for the environments, control methods for non-holonomic systems, robot systems which can mimic and learn human skills were studied. In each sub-project, some problems were hi-lighted and solutions for the problems have been given based on construction of experimental systems. (NEDO)

SU-E-T-50: A Multi-Institutional Study of Independent Dose Verification Software Program for Lung SBRT

International Nuclear Information System (INIS)

Kawai, D; Takahashi, R; Kamima, T; Baba, H; Yamamoto, T; Kubo, Y; Ishibashi, S; Higuchi, Y; Takahashi, H; Tachibana, H

2015-01-01

Purpose: The accuracy of dose distribution depends on treatment planning system especially in heterogeneity-region. The tolerance level (TL) of the secondary check using the independent dose verification may be variable in lung SBRT plans. We conducted a multi-institutional study to evaluate the tolerance level of lung SBRT plans shown in the AAPM TG114. Methods: Five institutes in Japan participated in this study. All of the institutes used a same independent dose verification software program (Simple MU Analysis: SMU, Triangle Product, Ishikawa, JP), which is Clarkson-based and CT images were used to compute radiological path length. Analytical Anisotropic Algorithm (AAA), Pencil Beam Convolution with modified Batho-method (PBC-B) and Adaptive Convolve (AC) were used for lung SBRT planning. A measurement using an ion-chamber was performed in a heterogeneous phantom to compare doses from the three different algorithms and the SMU to the measured dose. In addition to it, a retrospective analysis using clinical lung SBRT plans (547 beams from 77 patients) was conducted to evaluate the confidence limit (CL, Average±2SD) in dose between the three algorithms and the SMU. Results: Compared to the measurement, the AAA showed the larger systematic dose error of 2.9±3.2% than PBC-B and AC. The Clarkson-based SMU showed larger error of 5.8±3.8%. The CLs for clinical plans were 7.7±6.0 % (AAA), 5.3±3.3 % (AC), 5.7±3.4 % (PBC -B), respectively. Conclusion: The TLs from the CLs were evaluated. A Clarkson-based system shows a large systematic variation because of inhomogeneous correction. The AAA showed a significant variation. Thus, we must consider the difference of inhomogeneous correction as well as the dependence of dose calculation engine

SU-E-T-50: A Multi-Institutional Study of Independent Dose Verification Software Program for Lung SBRT

Energy Technology Data Exchange (ETDEWEB)

Kawai, D [Kanagawa Cancer Center, Yokohama, Kanagawa-prefecture (Japan); Takahashi, R; Kamima, T [The Cancer Institute Hospital of JFCR, Koutou-ku, Tokyo (Japan); Baba, H [The National Cancer Center Hospital East, Kashiwa-city, Chiba prefecture (Japan); Yamamoto, T; Kubo, Y [Otemae Hospital, Chuou-ku, Osaka-city (Japan); Ishibashi, S; Higuchi, Y [Sasebo City General Hospital, Sasebo, Nagasaki (Japan); Takahashi, H [St Lukes International Hospital, Chuou-ku, Tokyo (Japan); Tachibana, H [National Cancer Center Hospital East, Kashiwa, Chiba (Japan)

2015-06-15

Purpose: The accuracy of dose distribution depends on treatment planning system especially in heterogeneity-region. The tolerance level (TL) of the secondary check using the independent dose verification may be variable in lung SBRT plans. We conducted a multi-institutional study to evaluate the tolerance level of lung SBRT plans shown in the AAPM TG114. Methods: Five institutes in Japan participated in this study. All of the institutes used a same independent dose verification software program (Simple MU Analysis: SMU, Triangle Product, Ishikawa, JP), which is Clarkson-based and CT images were used to compute radiological path length. Analytical Anisotropic Algorithm (AAA), Pencil Beam Convolution with modified Batho-method (PBC-B) and Adaptive Convolve (AC) were used for lung SBRT planning. A measurement using an ion-chamber was performed in a heterogeneous phantom to compare doses from the three different algorithms and the SMU to the measured dose. In addition to it, a retrospective analysis using clinical lung SBRT plans (547 beams from 77 patients) was conducted to evaluate the confidence limit (CL, Average±2SD) in dose between the three algorithms and the SMU. Results: Compared to the measurement, the AAA showed the larger systematic dose error of 2.9±3.2% than PBC-B and AC. The Clarkson-based SMU showed larger error of 5.8±3.8%. The CLs for clinical plans were 7.7±6.0 % (AAA), 5.3±3.3 % (AC), 5.7±3.4 % (PBC -B), respectively. Conclusion: The TLs from the CLs were evaluated. A Clarkson-based system shows a large systematic variation because of inhomogeneous correction. The AAA showed a significant variation. Thus, we must consider the difference of inhomogeneous correction as well as the dependence of dose calculation engine.

Multi-variable systems in nuclear power plant

International Nuclear Information System (INIS)

Collins, G.B.; Howell, J.

1982-01-01

Nuclear power plant are complex multi-variable dynamically interactive systems which employ many facets of systems and control theory in their analysis and design. Whole plant mathematical models must be developed and validated and in addition to their obvious role in control system synthesis and design, they are also widely used for operational constraint and plant malfunction analysis. The need for and scope of an integrated power plant control system is discussed and, as a specific example, the design of an integrated feedwater regulator is reviewed. The multi-variable frequency response analysis employed in the design is described in detail. (author)

Institute for Genomics and Systems Biology

Science.gov (United States)

Institute for Genomics and Systems Biology Discover. Predict. Improve. Advancing Human and , 2015 See all Research Papers Featured Video Introduction to Systems Biology Video: Introduction to Systems Biology News Jack Gilbert Heading UChicago Startup that Aims to Predict Behavior of Trillions of

Urology Residents' Experience and Attitude Toward Surgical Simulation: Presenting our 4-Year Experience With a Multi-institutional, Multi-modality Simulation Model.

Science.gov (United States)

Chow, Alexander K; Sherer, Benjamin A; Yura, Emily; Kielb, Stephanie; Kocjancic, Ervin; Eggener, Scott; Turk, Thomas; Park, Sangtae; Psutka, Sarah; Abern, Michael; Latchamsetty, Kalyan C; Coogan, Christopher L

2017-11-01

To evaluate the Urological resident's attitude and experience with surgical simulation in residency education using a multi-institutional, multi-modality model. Residents from 6 area urology training programs rotated through simulation stations in 4 consecutive sessions from 2014 to 2017. Workshops included GreenLight photovaporization of the prostate, ureteroscopic stone extraction, laparoscopic peg transfer, 3-dimensional laparoscopy rope pass, transobturator sling placement, intravesical injection, high definition video system trainer, vasectomy, and Urolift. Faculty members provided teaching assistance, objective scoring, and verbal feedback. Participants completed a nonvalidated questionnaire evaluating utility of the workshop and soliciting suggestions for improvement. Sixty-three of 75 participants (84%) (postgraduate years 1-6) completed the exit questionnaire. Median rating of exercise usefulness on a scale of 1-10 ranged from 7.5 to 9. On a scale of 0-10, cumulative median scores of the course remained high over 4 years: time limit per station (9; interquartile range [IQR] 2), faculty instruction (9, IQR 2), ease of use (9, IQR 2), face validity (8, IQR 3), and overall course (9, IQR 2). On multivariate analysis, there was no difference in rating of domains between postgraduate years. Sixty-seven percent (42/63) believe that simulation training should be a requirement of Urology residency. Ninety-seven percent (63/65) viewed the laboratory as beneficial to their education. This workshop model is a valuable training experience for residents. Most participants believe that surgical simulation is beneficial and should be a requirement for Urology residency. High ratings of usefulness for each exercise demonstrated excellent face validity provided by the course. Copyright © 2017 Elsevier Inc. All rights reserved.

Definition of multi-state weighted k-out-of-n: F systems

DEFF Research Database (Denmark)

Ding, Yi; Wu, Qiuwei; Zio, Enrico

2012-01-01

of the Multi-state Weighted k-out-of-n: G System- the Multi-state Weighted k-out-of-n: F System has not been clearly defined and discussed. In this short communication, the basic definition of the Multi-state Weighted k-out-of-n: F System model is proposed. The relationship between the Multi-state Weighted k...

A Complex Systems Approach to More Resilient Multi-Layered Security Systems

Energy Technology Data Exchange (ETDEWEB)

Brown, Nathanael J. K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Katherine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bandlow, Alisa [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nozick, Linda Karen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Waddell, Lucas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Levin, Drew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Whetzel, Jonathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-09-01

In July 2012, protestors cut through security fences and gained access to the Y-12 National Security Complex. This was believed to be a highly reliable, multi-layered security system. This report documents the results of a Laboratory Directed Research and Development (LDRD) project that created a consistent, robust mathematical framework using complex systems analysis algorithms and techniques to better understand the emergent behavior, vulnerabilities and resiliency of multi-layered security systems subject to budget constraints and competing security priorities. Because there are several dimensions to security system performance and a range of attacks that might occur, the framework is multi-objective for a performance frontier to be estimated. This research explicitly uses probability of intruder interruption given detection (P_I) as the primary resilience metric. We demonstrate the utility of this framework with both notional as well as real-world examples of Physical Protection Systems (PPSs) and validate using a well-established force-on-force simulation tool, Umbra.

Building Multi-Agent Systems Using Jason

DEFF Research Database (Denmark)

Boss, Niklas Skamriis; Jensen, Andreas Schmidt; Villadsen, Jørgen

2010-01-01

We provide a detailed description of the Jason-DTU system, including the used methodology, tools as well as team strategy. We also discuss the experience gathered in the contest. In spring 2009 the course “Artificial Intelligence and Multi- Agent Systems” was held for the first time...... on the Technical University of Denmark (DTU). A part of this course was a short introduction to the multi-agent framework Jason, which is an interpreter for AgentSpeak, an agent-oriented programming language. As the final project in this course a solution to the Multi-Agent Programming Contest from 2007, the Gold...

Process technology for multi-enzymatic reaction systems

DEFF Research Database (Denmark)

Xue, Rui; Woodley, John M.

2012-01-01

In recent years, biocatalysis has started to provide an important green tool in synthetic organic chemistry. Currently, the idea of using multi-enzymatic systems for industrial production of chemical compounds becomes increasingly attractive. Recent examples demonstrate the potential of enzymatic...... synthesis and fermentation as an alternative to chemical-catalysis for the production of pharmaceuticals and fine chemicals. In particular, the use of multiple enzymes is of special interest. However, many challenges remain in the scale-up of a multi-enzymatic system. This review summarizes and discusses...... the technology options and strategies that are available for the development of multi-enzymatic processes. Some engineering tools, including kinetic models and operating windows, for developing and evaluating such processes are also introduced....

Calculation and experimental investigation of multi-component ceramic systems

International Nuclear Information System (INIS)

Rother, M.

1994-12-01

This work shows a way to combine thermodynamic calculations and experiments in order to get useful information on the constitution of metal/non-metal systems. Many data from literature are critically evaluated and used as a basis for experiments and calculations. The following multi-component systems are treated: 1. Multi-component systems of 'ceramic' materials with partially metallic bonding (carbides, nitrides, oxides, borides, carbonitrides, borocarbides, oxinitrides of the 4-8th transition group metals) 2. multi-component systems of non-metallic materials with dominant covalent bonding (SiC, Si 3 N 4 , SiB 6 , BN, Al 4 C 3 , Be 2 C) 3. multi-component systems of non-metallic materials with dominant heteropolar bonding (Al 2 O 3 , TiO 2 , BeO, SiO 2 , ZrO 2 ). The interactions between 1. and 2., 2. and 3., 1. and 3. are also considered. The latest commercially available programmes for the calculation of thermodynamical equilibria and phase diagrams are evaluated and compared considering their facilities and limits. New phase diagrams are presented for many presently unknown multi-component systems; partly known systems are completed on the basis of selected thermodynamic data. The calculations are verified by experimental investigations (metallurgical and powder technology methods). Altogether 690 systems are evaluated, 126 are calculated for the first time and 52 systems are experimentally verified. New data for 60 ternary phases are elaborated by estimating the data limits for the Gibbs energy values. A synthesis of critical evaluation of literature, calculations and experiments leads to new important information about equilibria and reaction behaviour in multi-component systems. This information is necessary to develop new stable and metastable materials. (orig./MM) [de

Tuneable resolution as a systems biology approach for multi-scale, multi-compartment computational models.

Science.gov (United States)

Kirschner, Denise E; Hunt, C Anthony; Marino, Simeone; Fallahi-Sichani, Mohammad; Linderman, Jennifer J

2014-01-01

The use of multi-scale mathematical and computational models to study complex biological processes is becoming increasingly productive. Multi-scale models span a range of spatial and/or temporal scales and can encompass multi-compartment (e.g., multi-organ) models. Modeling advances are enabling virtual experiments to explore and answer questions that are problematic to address in the wet-lab. Wet-lab experimental technologies now allow scientists to observe, measure, record, and analyze experiments focusing on different system aspects at a variety of biological scales. We need the technical ability to mirror that same flexibility in virtual experiments using multi-scale models. Here we present a new approach, tuneable resolution, which can begin providing that flexibility. Tuneable resolution involves fine- or coarse-graining existing multi-scale models at the user's discretion, allowing adjustment of the level of resolution specific to a question, an experiment, or a scale of interest. Tuneable resolution expands options for revising and validating mechanistic multi-scale models, can extend the longevity of multi-scale models, and may increase computational efficiency. The tuneable resolution approach can be applied to many model types, including differential equation, agent-based, and hybrid models. We demonstrate our tuneable resolution ideas with examples relevant to infectious disease modeling, illustrating key principles at work. © 2014 The Authors. WIREs Systems Biology and Medicine published by Wiley Periodicals, Inc.

Multi-Planetary Systems: Observations and Models of Dynamical Interactions

Science.gov (United States)

Lissauer, Jack J.

2018-01-01

More than 600 multi-planet systems are known. The vast majority of these systems have been discovered by NASA's Kepler spacecraft, but dozens were found using the Doppler technique, the first multi-exoplanet system was identified through pulsar timing, and the most massive system has been found using imaging. More than one-third of the 4000+ planet candidates found by NASA's Kepler spacecraft are associated with target stars that have more than one planet candidate, and the large number of such Kepler "multis" tells us that flat multiplanet systems like our Solar System are common. Virtually all of Kepler candidate multis are stable, as tested by numerical integrations that assume a physically motivated mass-radius relationship. Statistical studies performed on these candidate systems reveal a great deal about the architecture of planetary systems, including the typical spacing of orbits and flatness. The characteristics of several of the most interesting confirmed multi-exoplanet systems will also be discussed.HR 8799's four massive planets orbit tens of AU from their host star and travel on nearly circular orbits. PSR B1257+12 has three much smaller planets orbiting close to a neutron star. Both represent extremes and show that planet formation is a robust process that produces a diversity of outcomes. Although both exomoons and Trojan (triangle Lagrange point) planets have been searched for, neither has yet been found.

Multi spectral scaling data acquisition system

International Nuclear Information System (INIS)

Behere, Anita; Patil, R.D.; Ghodgaonkar, M.D.; Gopalakrishnan, K.R.

1997-01-01

In nuclear spectroscopy applications, it is often desired to acquire data at high rate with high resolution. With the availability of low cost computers, it is possible to make a powerful data acquisition system with minimum hardware and software development, by designing a PC plug-in acquisition board. But in using the PC processor for data acquisition, the PC can not be used as a multitasking node. Keeping this in view, PC plug-in acquisition boards with on-board processor find tremendous applications. Transputer based data acquisition board has been designed which can be configured as a high count rate pulse height MCA or as a Multi Spectral Scaler. Multi Spectral Scaling (MSS) is a new technique, in which multiple spectra are acquired in small time frames and are then analyzed. This paper describes the details of this multi spectral scaling data acquisition system. 2 figs

Controlling bi-partite entanglement in multi-qubit systems

International Nuclear Information System (INIS)

Plesch, Martin; Novotny, Jaroslav; Dzurakova, Zuzana; Buzek, VladimIr

2004-01-01

Bi-partite entanglement in multi-qubit systems cannot be shared freely. The rules of quantum mechanics impose bounds on how multi-qubit systems can be correlated. In this paper, we utilize a concept of entangled graphs with weighted edges in order to analyse pure quantum states of multi-qubit systems. Here qubits are represented by vertexes of the graph, while the presence of bi-partite entanglement is represented by an edge between corresponding vertexes. The weight of each edge is defined to be the entanglement between the two qubits connected by the edge, as measured by the concurrence. We prove that each entangled graph with entanglement bounded by a specific value of the concurrence can be represented by a pure multi-qubit state. In addition, we present a logic network with O(N 2 ) elementary gates that can be used for preparation of the weighted entangled graphs of N qubits

Controlling bi-partite entanglement in multi-qubit systems

Science.gov (United States)

Plesch, Martin; Novotný, Jaroslav; Dzuráková, Zuzana; Buzek, Vladimír

2004-02-01

Bi-partite entanglement in multi-qubit systems cannot be shared freely. The rules of quantum mechanics impose bounds on how multi-qubit systems can be correlated. In this paper, we utilize a concept of entangled graphs with weighted edges in order to analyse pure quantum states of multi-qubit systems. Here qubits are represented by vertexes of the graph, while the presence of bi-partite entanglement is represented by an edge between corresponding vertexes. The weight of each edge is defined to be the entanglement between the two qubits connected by the edge, as measured by the concurrence. We prove that each entangled graph with entanglement bounded by a specific value of the concurrence can be represented by a pure multi-qubit state. In addition, we present a logic network with O(N2) elementary gates that can be used for preparation of the weighted entangled graphs of N qubits.

OPREVENT2: Design of a multi-institutional intervention for obesity control and prevention for American Indian adults.

Science.gov (United States)

Gittelsohn, Joel; Jock, Brittany; Redmond, Leslie; Fleischhacker, Sheila; Eckmann, Thomas; Bleich, Sara N; Loh, Hong; Ogburn, Elizabeth; Gadhoke, Preety; Swartz, Jacqueline; Pardilla, Marla; Caballero, Benjamin

2017-01-23

Obesity and other nutrition-related chronic disease rates are high in American Indian (AI) populations, and an urgent need exists to identify evidence-based strategies for prevention and treatment. Multi-level, multi-component (MLMC) interventions are needed, but there are significant knowledge gaps on how to deliver these types of interventions in low-income rural AI communities. OPREVENT2 is a MLMC intervention targeting AI adults living in six rural reservations in New Mexico and Wisconsin. Aiming to prevent and reduce obesity in adults by working at multiple levels of the food and physical activity (PA) environments, OPREVENT2 focuses on evidence-based strategies known to increase access to, demand for, and consumption of healthier foods and beverages, and increase worksite and home-based opportunities for PA. OPREVENT2 works to create systems-level change by partnering with tribal stakeholders, multiple levels of the food and PA environment (food stores, worksites, schools), and the social environment (children as change agents, families, social media). Extensive evaluation will be conducted at each level of the intervention to assess effectiveness via process and impact measures. Novel aspects of OPREVENT2 include: active engagement with stakeholders at many levels (policy, institutional, and at multiple levels of the food and PA system); use of community-based strategies to engage policymakers and other key stakeholders (community workshops, action committees); emphasis on both the built environment (intervening with retail food sources) and the social environment. This paper describes the design of the intervention and the evaluation plan of the OPREVENT2. Clinical Trial Registration: NCT02803853 (June 10, 2016).

Impact of the Patient-Reported Outcomes Management Information System (PROMIS) upon the Design and Operation of Multi-center Clinical Trials: a Qualitative Research Study

OpenAIRE

Eisenstein, Eric L.; Diener, Lawrence W.; Nahm, Meredith; Weinfurt, Kevin P.

2010-01-01

New technologies may be required to integrate the National Institutes of Health’s Patient Reported Outcome Management Information System (PROMIS) into multi-center clinical trials. To better understand this need, we identified likely PROMIS reporting formats, developed a multi-center clinical trial process model, and identified gaps between current capabilities and those necessary for PROMIS. These results were evaluated by key trial constituencies. Issues reported by principal investigators ...

Regulatory issues associated with the Multi-Purpose (MPC) system

International Nuclear Information System (INIS)

Roberts, J.P.; Desell, L.J.; Birch, M.L.; Morgan, R.G.

1994-01-01

The US Department of Energy Office of Civilian Radioactive Waste Management is developing a Multi-Purpose Canister system to promote compatibility between the waste program elements of storage, transportation, and disposal. The development of a Multi-Purpose Canister system requires meeting various regulatory requirements. These regulatory requirements are set forth in environmental and Nuclear Regulatory Commission (NRC) regulations. This paper discusses the more significant regulatory issues that must be addressed in the development of a Multi-Purpose Canister system by the Department of Energy

Robust multi-model predictive control of multi-zone thermal plate system

Directory of Open Access Journals (Sweden)

Poom Jatunitanon

2018-02-01

Full Text Available A modern controller was designed by using the mathematical model of a multi–zone thermal plate system. An important requirement for this type of controller is that it must be able to keep the temperature set-point of each thermal zone. The mathematical model used in the design was determined through a system identification process. The results showed that when the operating condition is changed, the performance of the controller may be reduced as a result of the system parameter uncertainties. This paper proposes a weighting technique of combining the robust model predictive controller for each operating condition into a single robust multi-model predictive control. Simulation and experimental results showed that the proposed method performed better than the conventional multi-model predictive control in rise time of transient response, when used in a system designed to work over a wide range of operating conditions.

5 CFR 4001.105 - Purchase of System institution assets.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Purchase of System institution assets... SUPPLEMENTAL STANDARDS OF ETHICAL CONDUCT FOR EMPLOYEES OF THE FARM CREDIT SYSTEM INSURANCE CORPORATION § 4001.105 Purchase of System institution assets. (a) Prohibition on purchasing assets owned by a System...

Groupies and Loners: The Population of Multi-planet Systems

Science.gov (United States)

Van Laerhoven, Christa L.; Greenberg, Richard

2014-11-01

Observational surveys with Kepler and other telescopes have shown that multi-planet systems are very numerous. Considering the secular dynamcis of multi-planet systems provides substantial insight into the interactions between planets in those systems. Since the underlying secular structure of a multi-planet system (the secular eigenmodes) can be calculated using only the planets' masses and semi-major axes, one can elucidate the eccentricity and inclination behavior of planets in those systems even without knowing the planets' current eccentricities and inclinations. We have calculated both the eccentricity and inclination secular eigenmodes for the population of known multi-planet systems whose planets have well determined masses and periods. We will discuss the commonality of dynamically grouped planets ('groupies') vs dynamically uncoupled planets ('loners'), and compare to what would be expected from randomly generated systems with the same overall distribution of masses and semi-major axes. We will also discuss the occurrence of planets that strongly influence the behavior of other planets without being influenced by those others ('overlords'). Examples will be given and general trends will be discussed.

NHL and RCGA Based Multi-Relational Fuzzy Cognitive Map Modeling for Complex Systems

Directory of Open Access Journals (Sweden)

Zhen Peng

2015-11-01

Full Text Available In order to model multi-dimensions and multi-granularities oriented complex systems, this paper firstly proposes a kind of multi-relational Fuzzy Cognitive Map (FCM to simulate the multi-relational system and its auto construct algorithm integrating Nonlinear Hebbian Learning (NHL and Real Code Genetic Algorithm (RCGA. The multi-relational FCM fits to model the complex system with multi-dimensions and multi-granularities. The auto construct algorithm can learn the multi-relational FCM from multi-relational data resources to eliminate human intervention. The Multi-Relational Data Mining (MRDM algorithm integrates multi-instance oriented NHL and RCGA of FCM. NHL is extended to mine the causal relationships between coarse-granularity concept and its fined-granularity concepts driven by multi-instances in the multi-relational system. RCGA is used to establish high-quality high-level FCM driven by data. The multi-relational FCM and the integrating algorithm have been applied in complex system of Mutagenesis. The experiment demonstrates not only that they get better classification accuracy, but it also shows the causal relationships among the concepts of the system.

Influence of spatial beam inhomogeneities on the parameters of a petawatt laser system based on multi-stage parametric amplification

International Nuclear Information System (INIS)

Frolov, S A; Trunov, V I; Pestryakov, Efim V; Leshchenko, V E

2013-01-01

We have developed a technique for investigating the evolution of spatial inhomogeneities in high-power laser systems based on multi-stage parametric amplification. A linearised model of the inhomogeneity development is first devised for parametric amplification with the small-scale self-focusing taken into account. It is shown that the application of this model gives the results consistent (with high accuracy and in a wide range of inhomogeneity parameters) with the calculation without approximations. Using the linearised model, we have analysed the development of spatial inhomogeneities in a petawatt laser system based on multi-stage parametric amplification, developed at the Institute of Laser Physics, Siberian Branch of the Russian Academy of Sciences (ILP SB RAS). (control of laser radiation parameters)

The Motivate Effect of Higher Education Institutions' Compensation System on Faculties

Institute of Scientific and Technical Information of China (English)

GU Qing-liang; SU Jun

2007-01-01

Based on the questionnaire survey, this article reveals the effects of the current university compensation system on faculties in three psychological aspects, namely performance exam effect, work pressure and endurance capability. The results indicate that university faculties have a strong pursuit for self-fulfillment and successful career. Most of them love their teaching career and wish to further improve the fairness and efficiency of university management system by deepening the management systemic reform. Multi-leveled, multi-purposed and multi-modeled managing strategy of university compensation system is proved to be the main methods of improving fairness and efficiency.

Experiences with Learning Management Systems in 113 European Institutions

Directory of Open Access Journals (Sweden)

Morten Flate Paulsen

2003-10-01

Full Text Available This article presents the major findings from six regional analyses conducted within the framework of the European Web-edu project (http://www.nettskolen.com/in_english/webedusite/index.html. It analyses the experiences of European institutions with the Learning Management Systems that they have purchased or developed themselves. Data was collected from in-depth interviews with 113 European experts, usually the systems managers in the institutions, in 17 countries. The analyses of the interviews revealed as many as 52 different commercial and 35 self-developed LMS systems. The article presents the data from these interviews and includes a series of important findings from the study. One conclusion is that there is a host of commercial and self-developed systems that seem to work satisfactorily in various educational institutions throughout Europe. The systems are not able to handle all the functions the institutions want, and they can be improved in many ways. But most systems encountered in the analyses seem to be good enough for handling online education successfully. Another conclusion is that the European market is not dominated by the American LMS systems. In countries that do not use English as the first language, locally developed LMS systems have successfully ousted the American products. Remarkably, a large number of the LMS systems used in Europe are commercial systems developed locally, or self-developed systems built by the institutions.

Measuring systemic importance of financial institutions: An extreme value theory approach

OpenAIRE

Gravelle, Toni; Li, Fuchun

2011-01-01

In this paper, we define a financial institution's contribution to financial systemic risk as the increase in financial systemic risk conditional on the crash of the financial institution. The higher the contribution is, the more systemically important is the institution for the system. Based on relevant but different measurements of systemic risk, we propose a set of market-based measures on the systemic importance of financial institutions, each designed to capture certain aspects of system...

Derivation of optimal joint operating rules for multi-purpose multi-reservoir water-supply system

Science.gov (United States)

Tan, Qiao-feng; Wang, Xu; Wang, Hao; Wang, Chao; Lei, Xiao-hui; Xiong, Yi-song; Zhang, Wei

2017-08-01

The derivation of joint operating policy is a challenging task for a multi-purpose multi-reservoir system. This study proposed an aggregation-decomposition model to guide the joint operation of multi-purpose multi-reservoir system, including: (1) an aggregated model based on the improved hedging rule to ensure the long-term water-supply operating benefit; (2) a decomposed model to allocate the limited release to individual reservoirs for the purpose of maximizing the total profit of the facing period; and (3) a double-layer simulation-based optimization model to obtain the optimal time-varying hedging rules using the non-dominated sorting genetic algorithm II, whose objectives were to minimize maximum water deficit and maximize water supply reliability. The water-supply system of Li River in Guangxi Province, China, was selected for the case study. The results show that the operating policy proposed in this study is better than conventional operating rules and aggregated standard operating policy for both water supply and hydropower generation due to the use of hedging mechanism and effective coordination among multiple objectives.

IMRT QA using machine learning: A multi-institutional validation.

Science.gov (United States)

Valdes, Gilmer; Chan, Maria F; Lim, Seng Boh; Scheuermann, Ryan; Deasy, Joseph O; Solberg, Timothy D

2017-09-01

To validate a machine learning approach to Virtual intensity-modulated radiation therapy (IMRT) quality assurance (QA) for accurately predicting gamma passing rates using different measurement approaches at different institutions. A Virtual IMRT QA framework was previously developed using a machine learning algorithm based on 498 IMRT plans, in which QA measurements were performed using diode-array detectors and a 3%local/3 mm with 10% threshold at Institution 1. An independent set of 139 IMRT measurements from a different institution, Institution 2, with QA data based on portal dosimetry using the same gamma index, was used to test the mathematical framework. Only pixels with ≥10% of the maximum calibrated units (CU) or dose were included in the comparison. Plans were characterized by 90 different complexity metrics. A weighted poison regression with Lasso regularization was trained to predict passing rates using the complexity metrics as input. The methodology predicted passing rates within 3% accuracy for all composite plans measured using diode-array detectors at Institution 1, and within 3.5% for 120 of 139 plans using portal dosimetry measurements performed on a per-beam basis at Institution 2. The remaining measurements (19) had large areas of low CU, where portal dosimetry has a larger disagreement with the calculated dose and as such, the failure was expected. These beams need further modeling in the treatment planning system to correct the under-response in low-dose regions. Important features selected by Lasso to predict gamma passing rates were as follows: complete irradiated area outline (CIAO), jaw position, fraction of MLC leafs with gaps smaller than 20 or 5 mm, fraction of area receiving less than 50% of the total CU, fraction of the area receiving dose from penumbra, weighted average irregularity factor, and duty cycle. We have demonstrated that Virtual IMRT QA can predict passing rates using different measurement techniques and across multiple

Development of multi-functional telerobotic systems for reactor dismantlement

International Nuclear Information System (INIS)

Fujii, Yoshio; Usui, Hozumi; Shinohara, Yoshikuni

1992-01-01

This report summarizes technological features of advanced telerobotic systems for reactor dismantling application developed at the Japan Atomic Energy Research Institute. Taking into consideration the special environmental conditions in reactor dismantling, major effort was made to develop multifunctional telerobotic system of high reliability which can be used to perform various complex tasks in an unstructured environment and operated in an easy and flexible manner. The system development was carried out through constructing three systems in seccession; a light-duty and a heavy-duty system as a prototype system for engineering test in cold environment, and a demonstration system for practical on-site application to dismantling highly radioactive reactor internals of an experimental boiling water reactor JPDR (Japan Power Demonstration Reactor). Each system was equipped with one or two amphibious manipulators which can be operated in either a push-button manual, a bilateral master-slave, a teach-and-playback or a programmed control mode. Different scheme was adopted in each system at designing the manipulator, transporter and man-machine interface so as to compare their advantages and disadvantages. According to the JPDR decommissioning program, the demonstration system was successfully operated to dismantle a portion of the radioactive reactor internals of the JPDR, which used underwater plasma arc cutting method and proved the usefulness of the multi-functional telerobotic system for reducing the occupational hazards and enhancing the work efficiency in the course of dismantling highly radioactive reactor components. (author)

Design and optimization of flexible multi-generation systems

DEFF Research Database (Denmark)

Lythcke-Jørgensen, Christoffer Ernst

variations and dynamics, and energy system analysis, which fails to consider process integration synergies in local systems. The primary objective of the thesis is to derive a methodology for linking process design practices with energy system analysis for enabling coherent and holistic design optimization...... of flexible multi-generation system. In addition, the case study results emphasize the importance of considering flexible operation, systematic process integration, and systematic assessment of uncertainties in the design optimization. It is recommended that future research focus on assessing system impacts...... from flexible multi-generation systems and performance improvements from storage options....

Design Multi-Sides System Unmanned Surface Vehicle (USV) Rocket

Science.gov (United States)

Syam, Rafiudin; Sutresman, Onny; Mappaita, Abdullah; Amiruddin; Wiranata, Ardi

2018-02-01

This study aims to design and test USV multislide forms. This system is excellent for maneuvering on the x-y-z coordinates. The disadvantage of a single side USV is that it is very difficult to maneuver to achieve very dynamic targets. While for multi sides system easily maneuvered though x-y-z coordinates. In addition to security defense purposes, multi-side system is also good for maritime intelligence, surveillance. In this case, electric deducted fan with Multi-Side system so that the vehicle can still operate even in reverse condition. Multipleside USV experiments have done with good results. In a USV study designed to use two propulsions.

Incumbency in Multi-level Political Systems and Recruitment Advantage: The Case of the Czech Regional Assemblies

Czech Academy of Sciences Publication Activity Database

Bernard, Josef; Šafr, Jiří

2016-01-01

Roč. 52, č. 3 (2016), s. 267-291 ISSN 0038-0288 R&D Projects: GA ČR GAP404/12/0714 Institutional support: RVO:68378025 Keywords : incumbency * legislative recruitment * multi-level political system Subject RIV: AD - Politology ; Political Sciences Impact factor: 0.143, year: 2016 http://sreview.soc.cas.cz/uploads/6184b97b7357aa4e289089fff7852b7d898290d9_16-3-02Bernard15.indd.pdf

An Online Q-learning Based Multi-Agent LFC for a Multi-Area Multi-Source Power System Including Distributed Energy Resources

Directory of Open Access Journals (Sweden)

H. Shayeghi

2017-12-01

Full Text Available This paper presents an online two-stage Q-learning based multi-agent (MA controller for load frequency control (LFC in an interconnected multi-area multi-source power system integrated with distributed energy resources (DERs. The proposed control strategy consists of two stages. The first stage is employed a PID controller which its parameters are designed using sine cosine optimization (SCO algorithm and are fixed. The second one is a reinforcement learning (RL based supplementary controller that has a flexible structure and improves the output of the first stage adaptively based on the system dynamical behavior. Due to the use of RL paradigm integrated with PID controller in this strategy, it is called RL-PID controller. The primary motivation for the integration of RL technique with PID controller is to make the existing local controllers in the industry compatible to reduce the control efforts and system costs. This novel control strategy combines the advantages of the PID controller with adaptive behavior of MA to achieve the desired level of robust performance under different kind of uncertainties caused by stochastically power generation of DERs, plant operational condition changes, and physical nonlinearities of the system. The suggested decentralized controller is composed of the autonomous intelligent agents, who learn the optimal control policy from interaction with the system. These agents update their knowledge about the system dynamics continuously to achieve a good frequency oscillation damping under various severe disturbances without any knowledge of them. It leads to an adaptive control structure to solve LFC problem in the multi-source power system with stochastic DERs. The results of RL-PID controller in comparison to the traditional PID and fuzzy-PID controllers is verified in a multi-area power system integrated with DERs through some performance indices.

Conservative treatment of breast ductal carcinoma in situ: results of an Italian multi-institutional retrospective study

International Nuclear Information System (INIS)

Vidali, Cristiana; Neri, Stefano; Pietta, Nicoletta; Caffo, Orazio; Aristei, Cynthia; Bertoni, Filippo; Bonetta, Alberto; Guenzi, Marina; Iotti, Cinzia; Leonardi, Maria Cristina; Mussari, Salvatore

2012-01-01

The incidence of ductal carcinoma in situ (DCIS) has increased markedly in recent decades. In the past, mastectomy was the primary treatment for patients with DCIS, but as with invasive cancer, breast-conserving surgery followed by radiation therapy (RT) has become the standard approach. We present the final results of a multi-institutional retrospective study of an Italian Radiation Oncology Group for the study of conservative treatment of DCIS, characterized by a very long period of accrual, from February 1985 to March 2000, and a median follow-up longer than 11 years. A collaborative multi-institutional study was conducted in Italy in 10 Radiation Oncology Departments. A consecutive series of 586 women with DCIS histologically confirmed, treated between February 1985 and March 2000, was retrospectively evaluated. Median age at diagnosis was 55 years (range: 29–84); 32 patients were 40 years old or younger. All women underwent conservative surgery followed by whole breast RT. Irradiation was delivered to the entire breast, for a median total dose of 50 Gy; the tumour bed was boosted in 295 cases (50%) at a median dose of 10 Gy. After a median follow-up of 136 months (range: 16–292 months), 59/586 patients (10%) experienced a local recurrence: invasive in 37 cases, intraductal in 20 and not specified in two. Salvage mastectomy was the treatment of choice in 46 recurrent patients; conservative surgery in 10 and it was unknown in three patients. The incidence of local recurrence was significantly higher in women younger than 40 years (31.3%) (p= 0.0009). Five patients developed distant metastases. Furthermore 40 patients developed a contralateral breast cancer and 31 a second primary tumour in a different site. The 10-year actuarial overall survival (OS) was 95.5% and the 10-year actuarial disease-specific survival (DSS) was 99%. Our results are consistent with those reported in the literature. In particular it has been defined the importance of young age (40

Predictive modeling of coupled multi-physics systems: I. Theory

International Nuclear Information System (INIS)

Cacuci, Dan Gabriel

2014-01-01

Highlights: • We developed “predictive modeling of coupled multi-physics systems (PMCMPS)”. • PMCMPS reduces predicted uncertainties in predicted model responses and parameters. • PMCMPS treats efficiently very large coupled systems. - Abstract: This work presents an innovative mathematical methodology for “predictive modeling of coupled multi-physics systems (PMCMPS).” This methodology takes into account fully the coupling terms between the systems but requires only the computational resources that would be needed to perform predictive modeling on each system separately. The PMCMPS methodology uses the maximum entropy principle to construct an optimal approximation of the unknown a priori distribution based on a priori known mean values and uncertainties characterizing the parameters and responses for both multi-physics models. This “maximum entropy”-approximate a priori distribution is combined, using Bayes’ theorem, with the “likelihood” provided by the multi-physics simulation models. Subsequently, the posterior distribution thus obtained is evaluated using the saddle-point method to obtain analytical expressions for the optimally predicted values for the multi-physics models parameters and responses along with corresponding reduced uncertainties. Noteworthy, the predictive modeling methodology for the coupled systems is constructed such that the systems can be considered sequentially rather than simultaneously, while preserving exactly the same results as if the systems were treated simultaneously. Consequently, very large coupled systems, which could perhaps exceed available computational resources if treated simultaneously, can be treated with the PMCMPS methodology presented in this work sequentially and without any loss of generality or information, requiring just the resources that would be needed if the systems were treated sequentially

Information flow within relational multi-context systems

DEFF Research Database (Denmark)

Cruz-Filipe, Luís; Gaspar, GrąCa; Nunes, Isabel

2014-01-01

Multi-context systems (MCSs) are an important framework for heterogeneous combinations of systems within the Semantic Web. In this paper, we propose generic constructions to achieve specific forms of interaction in a principled way, and systematize some useful techniques to work with ontologies w...... within an MCS. All these mechanisms are presented in the form of general-purpose design patterns. Their study also suggests new ways in which this framework can be further extended.......Multi-context systems (MCSs) are an important framework for heterogeneous combinations of systems within the Semantic Web. In this paper, we propose generic constructions to achieve specific forms of interaction in a principled way, and systematize some useful techniques to work with ontologies...

Multi-source remote sensing data management system

International Nuclear Information System (INIS)

Qin Kai; Zhao Yingjun; Lu Donghua; Zhang Donghui; Wu Wenhuan

2014-01-01

In this thesis, the author explored multi-source management problems of remote sensing data. The main idea is to use the mosaic dataset model, and the ways of an integreted display of image and its interpretation. Based on ArcGIS and IMINT feature knowledge platform, the author used the C# and other programming tools for development work, so as to design and implement multi-source remote sensing data management system function module which is able to simply, conveniently and efficiently manage multi-source remote sensing data. (authors)

Multi-Modal Intelligent Traffic Signal Systems GPS

Data.gov (United States)

Department of Transportation — Data were collected during the Multi-Modal Intelligent Transportation Signal Systems (MMITSS) study. MMITSS is a next-generation traffic signal system that seeks to...

Annual Report 1991. Institute for systems engineering and informatics

International Nuclear Information System (INIS)

1992-01-01

The report presents the achievements of the Institute for Systems Engineering and Informatics (ISEI) of the Joint Research Centre (JRC) of the Commission of the European Communities (CEC) for 1991. The JRC is a European scientific and technical research centre established by the member states of the CEC. Its four sites in Belgium (Geel), Germany (Karlsruhe), the Netherland (Petten) and Italy (Ispra) house 8 institutes, each with its own focus of expertise. ISEI, based at Ispra, was created in 1990 by the merger of the Institute for Systems Engineering (ISE) and the Centre for Information Technologies and Electronics (CITE). The main areas of activity of the Institute are: - Industrial and Environmental Risk, - Nuclear Safeguards, -Fusion Reactor Systems Integration and Safety, - Solar Energy Systems and Energy Management, - Advanced Computing, - Informatic services

Semiotics, Multi-Agent Systems and Organizations

NARCIS (Netherlands)

Gazendam, H.W.M.; Jorna, René J.

1998-01-01

Multi-agent systems are promising as models of organization because they are based on the idea that most work in human organizations is done based on intelligence, communication, cooperation, and massive parallel processing. They offer an alternative for system theories of organization, which are

Trends in practical applications of heterogeneous multi-agent systems : the PAAMS collection

CERN Document Server

Rodríguez, Juan; Mathieu, Philippe; Campbell, Andrew; Ortega, Alfonso; Adam, Emmanuel; Navarro, Elena; Ahrndt, Sebastian; Moreno, María; Julián, Vicente

2014-01-01

PAAMS, the International Conference on Practical Applications of Agents and Multi-Agent Systems is an evolution of the International Workshop on Practical Applications of Agents and Multi-Agent Systems. PAAMS is an international yearly tribune to present, to discuss, and to disseminate the latest developments and the most important outcomes related to real-world applications. It provides a unique opportunity to bring multi-disciplinary experts, academics and practitioners together to exchange their experience in the development of Agents and Multi-Agent Systems. This volume presents the papers that have been accepted for the 2014 special sessions: Agents Behaviours and Artificial Markets (ABAM), Agents and Mobile Devices (AM), Bio-Inspired and Multi-Agents Systems: Applications to Languages (BioMAS), Multi-Agent Systems and Ambient Intelligence (MASMAI), Self-Explaining Agents (SEA), Web Mining and Recommender systems (WebMiRes) and Intelligent Educational Systems (SSIES).

L1 Adaptive Control Augmentation System with Application to the X-29 Lateral/Directional Dynamics: A Multi-Input Multi-Output Approach

Science.gov (United States)

Griffin, Brian Joseph; Burken, John J.; Xargay, Enric

2010-01-01

This paper presents an L(sub 1) adaptive control augmentation system design for multi-input multi-output nonlinear systems in the presence of unmatched uncertainties which may exhibit significant cross-coupling effects. A piecewise continuous adaptive law is adopted and extended for applicability to multi-input multi-output systems that explicitly compensates for dynamic cross-coupling. In addition, explicit use of high-fidelity actuator models are added to the L1 architecture to reduce uncertainties in the system. The L(sub 1) multi-input multi-output adaptive control architecture is applied to the X-29 lateral/directional dynamics and results are evaluated against a similar single-input single-output design approach.

A multi-channel humidity control system based on LabVIEW

International Nuclear Information System (INIS)

Zhang Aiwu; Xie Yuguang; Liu Hongbang; Liu Yingbiao; Cai Xiao; Yu Boxiang; Lu Junguang; Zhou Li

2011-01-01

A real time multi-channel humidity control system was designed based on LabVIEW, using the dry air branch of BESⅢ drying system. The hardware of this control system consist of mini humidity and temperature sensors, intelligent collection module, switch quantity controller and electromagnetic valves. The humidity can be controlled at arbitrary value from air humidity to 3% with accuracy better than 2%. Multi microenvironment with different humidity can be easily controlled and monitored in real time by this system. It can also be extended to hybrid control of multi channel humidity and temperature. (authors)

Extended multi-configuration quasi-degenerate perturbation theory: the new approach to multi-state multi-reference perturbation theory.

Science.gov (United States)

Granovsky, Alexander A

2011-06-07

The distinctive desirable features, both mathematically and physically meaningful, for all partially contracted multi-state multi-reference perturbation theories (MS-MR-PT) are explicitly formulated. The original approach to MS-MR-PT theory, called extended multi-configuration quasi-degenerate perturbation theory (XMCQDPT), having most, if not all, of the desirable properties is introduced. The new method is applied at the second order of perturbation theory (XMCQDPT2) to the 1(1)A(')-2(1)A(') conical intersection in allene molecule, the avoided crossing in LiF molecule, and the 1(1)A(1) to 2(1)A(1) electronic transition in cis-1,3-butadiene. The new theory has several advantages compared to those of well-established approaches, such as second order multi-configuration quasi-degenerate perturbation theory and multi-state-second order complete active space perturbation theory. The analysis of the prevalent approaches to the MS-MR-PT theory performed within the framework of the XMCQDPT theory unveils the origin of their common inherent problems. We describe the efficient implementation strategy that makes XMCQDPT2 an especially useful general-purpose tool in the high-level modeling of small to large molecular systems. © 2011 American Institute of Physics

OPREVENT2: Design of a multi-institutional intervention for obesity control and prevention for American Indian adults

Directory of Open Access Journals (Sweden)

Joel Gittelsohn

2017-01-01

Full Text Available Abstract Background Obesity and other nutrition-related chronic disease rates are high in American Indian (AI populations, and an urgent need exists to identify evidence-based strategies for prevention and treatment. Multi-level, multi-component (MLMC interventions are needed, but there are significant knowledge gaps on how to deliver these types of interventions in low-income rural AI communities. Methods OPREVENT2 is a MLMC intervention targeting AI adults living in six rural reservations in New Mexico and Wisconsin. Aiming to prevent and reduce obesity in adults by working at multiple levels of the food and physical activity (PA environments, OPREVENT2 focuses on evidence-based strategies known to increase access to, demand for, and consumption of healthier foods and beverages, and increase worksite and home-based opportunities for PA. OPREVENT2 works to create systems-level change by partnering with tribal stakeholders, multiple levels of the food and PA environment (food stores, worksites, schools, and the social environment (children as change agents, families, social media. Extensive evaluation will be conducted at each level of the intervention to assess effectiveness via process and impact measures. Discussion Novel aspects of OPREVENT2 include: active engagement with stakeholders at many levels (policy, institutional, and at multiple levels of the food and PA system; use of community-based strategies to engage policymakers and other key stakeholders (community workshops, action committees; emphasis on both the built environment (intervening with retail food sources and the social environment. This paper describes the design of the intervention and the evaluation plan of the OPREVENT2. Trial registration Clinical Trial Registration: NCT02803853 (June 10, 2016

Optimization of multi-phase compressible lattice Boltzmann codes on massively parallel multi-core systems

NARCIS (Netherlands)

Biferale, L.; Mantovani, F.; Pivanti, M.; Pozzati, F.; Sbragaglia, M.; Schifano, S.F.; Toschi, F.; Tripiccione, R.

2011-01-01

We develop a Lattice Boltzmann code for computational fluid-dynamics and optimize it for massively parallel systems based on multi-core processors. Our code describes 2D multi-phase compressible flows. We analyze the performance bottlenecks that we find as we gradually expose a larger fraction of

Benefits of mock oral examinations in a multi-institutional consortium for board certification in general surgery training.

Science.gov (United States)

Subhas, Gokulakkrishna; Yoo, Stephen; Chang, Yeon-Jeen; Peiper, David; Frikker, Mark J; Bouwman, David L; Silbergleit, Allen; Lloyd, Larry R; Mittal, Vijay K

2009-09-01

The Southeast Michigan Center for Medical Education (SEMCME) is a consortium of teaching hospitals in the Greater Detroit metropolitan area. SEMCME pools its resources for several educational means, including mock oral board examinations. The educational and cost benefits to mock oral examinations on a multi-institutional basis in preparation for the American Board of Surgery (ABS) certifying examination were analyzed. Ten-year multi-institution data from the mock oral examinations were correlated with ABS certifying examination pass rates. Mock oral examination scores were available for 107 of 147 graduates, which included 12 candidates who failed their certifying examination on the first attempt (pass rate = 89%). Four of 31 examinees who had a low score (4.9 or less) in their mock oral exams failed their certifying examination in their first attempt. The cost of running the mock examination was low (approximately $35/resident for 50 residents). When graduates from the last 10 years were surveyed, the majority of respondents believed that the mock oral examination helped in their success and with their preparation for the certifying examination. Thus, the many benefits of administering the examination with the resources of a consortium of hospitals result in the accurate reproduction of real-life testing conditions with reasonable overall costs per resident.

System Theory Aspects of Multi-Body Dynamics.

Science.gov (United States)

1978-08-18

systems are described from a system theory point of view. Various system theory concepts and research topics which have applicability to this class of...systems are identified and briefly described. The subject of multi-body dynamics is presented in a vector space setting and is related to system theory concepts. (Author)

Regulatory networks, legal federalism, and multi-level regulatory systems

OpenAIRE

Kerber, Wolfgang; Wendel, Julia

2016-01-01

Transnational regulatory networks play important roles in multi-level regulatory regimes, as e.g, the European Union. In this paper we analyze the role of regulatory networks from the perspective of the economic theory of legal federalism. Often sophisticated intermediate institutional solutions between pure centralisation and pure decentralisation can help to solve complex tradeoff problems between the benefits and problems of centralised and decentralised solutions. Drawing upon the insight...

On multi-dissipative dynamic systems

DEFF Research Database (Denmark)

Thygesen, Uffe Høgsbro

1999-01-01

We consider deterministic dynamic systems with state space representations which are dissipative in the sense of Willems (1972) with respect to several supply rates. This property is of interest in robustness analysis and in multi-objective control. We give conditions under which the convex cone...

How does leadership education shape students’ definitions of leadership? Insights from the Multi-institutional Study of Leadership

OpenAIRE

Kaufman, EK; Thornton, J; Coartney, J

2017-01-01

The Multi-institutional Study of Leadership (MSL) is an international research program focused on understanding the influences of higher education in shaping socially responsible leadership capacity and other related student outcomes. While there have been numerous reports on the quantitative findings from the MSL, the published research tends to ignore data from the qualitative prompt: “Please provide a brief definition of what the term leadership means to you.” By coding and categorizing th...

Multi Optical Transition Radiation System for ATF2

International Nuclear Information System (INIS)

Alabau-Gonzalvo, Javier

2012-01-01

In this paper we describe the design, installation and first calibration tests of a Multi Optical Transition Radiation System in the beam diagnostic section of the Extraction (EXT) line of ATF2, close to the multi wire scanner system. This system will be a valuable tool for measuring beam sizes and emittances coming from the ATF Damping Ring. With an optical resolution of about 2 (micro)m an original OTR design (OTR1X) located after the septum at the entrance of the EXT line demonstrated the ability to measure a 5.5 (micro)m beam size in one beam pulse and to take many fast measurements. This gives the OTR the ability to measure the beam emittance with high statistics, giving a low error and a good understanding of emittance jitter. Furthermore the nearby wire scanners will be a definitive test of the OTR as a beam emittance diagnostic device. The multi-OTR system design proposed here is based on the existing OTR1X.

Reliability assessment of embedded digital system using multi-state function

International Nuclear Information System (INIS)

Choi, Jong Gyun; Seong, Poong Hyun

2006-01-01

This work describes a combinatorial model for estimating the reliability of the embedded digital system by means of multi-state function. This model includes a coverage model for fault-handling techniques implemented in digital systems. The fault-handling techniques make it difficult for many types of components in digital system to be treated as binary state, good or bad. The multi-state function provides a complete analysis of multi-state systems as which the digital systems can be regarded. Through adaptation of software operational profile flow to multi-state function, the HW/SW interaction is also considered for estimation of the reliability of digital system. Using this model, we evaluate the reliability of one board controller in a digital system, Interposing Logic System (ILS), which is installed in YGN nuclear power units 3 and 4. Since the proposed model is a generalized combinatorial model, the simplification of this model becomes the conventional model that treats the system as binary state. This modeling method is particularly attractive for embedded systems in which small sized application software is implemented since it will require very laborious work for this method to be applied to systems with large software

Multi-Level Formation of Complex Software Systems

Directory of Open Access Journals (Sweden)

Hui Li

2016-05-01

Full Text Available We present a multi-level formation model for complex software systems. The previous works extract the software systems to software networks for further studies, but usually investigate the software networks at the class level. In contrast to these works, our treatment of software systems as multi-level networks is more realistic. In particular, the software networks are organized by three levels of granularity, which represents the modularity and hierarchy in the formation process of real-world software systems. More importantly, simulations based on this model have generated more realistic structural properties of software networks, such as power-law, clustering and modularization. On the basis of this model, how the structure of software systems effects software design principles is then explored, and it could be helpful for understanding software evolution and software engineering practices.

Observation of Asian dust properties by using multi-wavelength LIDAR system at anmyeon island, Korea

International Nuclear Information System (INIS)

Choi, Sung Chul; Ko, Do Kyeoung; Lee, Jong Min; Kim, Young Joon; Noh, Young Min

2004-01-01

The Asian dust affect climate both directly and indirectly because they act as effective ice nuclei and forms ice cloud. However, little is known about spatial distribution and trajectory because few measurement data are available in the free troposphere over East Asia, where a large amount of Asian dust are transported form desert regions in Asian continent. LIDAR system is an effective tool for remotely measuring the vertical distribution of aerosol optical properties. For measurement of Asian dust optical properties, a multi-wavelength LIDAR system developed by the Advanced Environment Monitoring Research Center (ADEMRC), Gwangju Institute Science and Technology (GIST), Korea. This paper presents the results of ground-based multi-wavelength LIDAR measurements of the Asian dust aerosol over Anmyeon Island (36.40N, 126.10E) during the spring of 2004. To discriminate between Asian dust and cloud, depolarization ratio is useful for the detection of these particles and the LIDAR ratio. Also, we discuss the relationship between LIDAR ratio and other optical properties from LIDAR measurement, i.e., the depolarization ratio, aerosol extinction coefficient and LIDAR ratio

Engineering test of stripping performance by multi-centrifugal contactors system for spent nuclear reprocessing

International Nuclear Information System (INIS)

Masayuki Takeuchi; Tadahiro Washiya; Hiroki Nakabayashi; Takashi Suganuma; Shinnichi Aose

2005-01-01

Japan Nuclear Cycle Development Institute (JNC) has been developing centrifugal contactors which are compact and high performance for solvent extraction process in industrial reprocessing plant. The stripping performance including equilibrium time for distribution and hydraulic behavior of the multi-centrifugal contactors were mainly evaluated by using uranium nitrite solution on engineering scale (10 kgHM/hr). In particular, the effects of feed temperature of stripping solution and O/A on the stripping performance were focused in this test. As results, no hydraulic problem such as overflow and entrainment were observed in multi-centrifugal contactors system through all conditions, and the uranium and acid concentrations showed desirable profiles which were nearly consistent with calculated one by MIXSET-X code. As to stripping performance, uranium leak concentration in solvent reached to less than 0.01 g/L, which is target of the stripping performance on this centrifugal contactors system, within nine stages on all conditions. It was also found that the effect of feed temperature of stripping solution (35 degree C → 60 degree C) or O/A (1.0→0.8) on stripping performance corresponds to distribution capacity of two contactors, respectively. The stage efficiency for a contactor was estimated as 97-98% on stripping stage. There were no uranium leaks (less than 40μg/L) in spent solvent discharged from the final stage. The profiles of uranium concentration in multi-contactors become stable within 10 minutes after the stripping test starting. In this way, it was demonstrated that the centrifugal contactors system has good stripping performance on engineering scale. (authors)

SU-E-T-48: A Multi-Institutional Study of Independent Dose Verification for Conventional, SRS and SBRT

International Nuclear Information System (INIS)

Takahashi, R; Kamima, T; Tachibana, H; Baba, H; Itano, M; Yamazaki, T; Ishibashi, S; Higuchi, Y; Shimizu, H; Yamamoto, T; Yamashita, M; Sugawara, Y; Sato, A; Nishiyama, S; Kawai, D; Miyaoka, S

2015-01-01

Purpose: To show the results of a multi-institutional study of the independent dose verification for conventional, Stereotactic radiosurgery and body radiotherapy (SRS and SBRT) plans based on the action level of AAPM TG-114. Methods: This study was performed at 12 institutions in Japan. To eliminate the bias of independent dose verification program (Indp), all of the institutions used the same CT-based independent dose verification software (Simple MU Analysis, Triangle Products, JP) with the Clarkson-based algorithm. Eclipse (AAA, PBC), Pinnacle 3 (Adaptive Convolve) and Xio (Superposition) were used as treatment planning system (TPS). The confidence limits (CL, Mean±2SD) for 18 sites (head, breast, lung, pelvis, etc.) were evaluated in comparison in dose between the TPS and the Indp. Results: A retrospective analysis of 6352 treatment fields was conducted. The CLs for conventional, SRS and SBRT were 1.0±3.7 %, 2.0±2.5 % and 6.2±4.4 %, respectively. In conventional plans, most of the sites showed within 5 % of TG-114 action level. However, there were the systematic difference (4.0±4.0 % and 2.5±5.8 % for breast and lung, respectively). In SRS plans, our results showed good agreement compared to the action level. In SBRT plans, the discrepancy between the Indp was variable depending on dose calculation algorithms of TPS. Conclusion: The impact of dose calculation algorithms for the TPS and the Indp affects the action level. It is effective to set the site-specific tolerances, especially for the site where inhomogeneous correction can affect dose distribution strongly

SU-E-T-48: A Multi-Institutional Study of Independent Dose Verification for Conventional, SRS and SBRT

Energy Technology Data Exchange (ETDEWEB)

Takahashi, R; Kamima, T [The Cancer Institute Hospital of JFCR, Koto-ku, Tokyo (Japan); Tachibana, H; Baba, H [National Cancer Center Hospital East, Kashiwa, Chiba (Japan); Itano, M; Yamazaki, T [Inagi Municipal Hospital, Inagi, Tokyo (Japan); Ishibashi, S; Higuchi, Y [Sasebo City General Hospital, Sasebo, Nagasaki (Japan); Shimizu, H [Kitasato University Medical Center, Kitamoto, Saitama (Japan); Yamamoto, T [Otemae Hospital, Chuou-ku, Osaka-city (Japan); Yamashita, M [Kobe City Medical Center General Hospital, Kobe, Hyogo (Japan); Sugawara, Y [The National Center for Global Health and Medicine, Shinjuku-ku, Tokyo (Japan); Sato, A [Itabashi Central General Hospital, Itabashi-ku, Tokyo (Japan); Nishiyama, S [Kuki General Hospital, Kuki, Saitama (Japan); Kawai, D [Kanagawa Cancer Center, Yokohama, Kanagawa-prefecture (Japan); Miyaoka, S [Kamitsuga General Hospital, Kanuma, Tochigi (Japan)

2015-06-15

Purpose: To show the results of a multi-institutional study of the independent dose verification for conventional, Stereotactic radiosurgery and body radiotherapy (SRS and SBRT) plans based on the action level of AAPM TG-114. Methods: This study was performed at 12 institutions in Japan. To eliminate the bias of independent dose verification program (Indp), all of the institutions used the same CT-based independent dose verification software (Simple MU Analysis, Triangle Products, JP) with the Clarkson-based algorithm. Eclipse (AAA, PBC), Pinnacle{sup 3} (Adaptive Convolve) and Xio (Superposition) were used as treatment planning system (TPS). The confidence limits (CL, Mean±2SD) for 18 sites (head, breast, lung, pelvis, etc.) were evaluated in comparison in dose between the TPS and the Indp. Results: A retrospective analysis of 6352 treatment fields was conducted. The CLs for conventional, SRS and SBRT were 1.0±3.7 %, 2.0±2.5 % and 6.2±4.4 %, respectively. In conventional plans, most of the sites showed within 5 % of TG-114 action level. However, there were the systematic difference (4.0±4.0 % and 2.5±5.8 % for breast and lung, respectively). In SRS plans, our results showed good agreement compared to the action level. In SBRT plans, the discrepancy between the Indp was variable depending on dose calculation algorithms of TPS. Conclusion: The impact of dose calculation algorithms for the TPS and the Indp affects the action level. It is effective to set the site-specific tolerances, especially for the site where inhomogeneous correction can affect dose distribution strongly.

Flexible Multi-Numerology Systems for 5G New Radio

OpenAIRE

Yazar, Ahmet; Peköz, Berker; Arslan, Hüseyin

2018-01-01

The physical layer of 5G cellular communications systems is designed to achieve better flexibility in an effort to support diverse services and user requirements. OFDM waveform parameters are enriched with flexible multi-numerology structures. This paper describes the differences between Long Term Evolution (LTE) systems and new radio (NR) from the flexibility perspective. Research opportunities for multi-numerology systems are presented in a structured manner. Finally, inter-numerology inter...

Specification of Behavioural Requirements within Compositional Multi-Agent System Design

OpenAIRE

Herlea, D.E.; Jonker, C.M.; Treur, J.; Wijngaards, N.J.E.

1999-01-01

In this paper it is shown how informal and formal specification of behavioural requirements and scenarios for agents and multi-agent systems can be integrated within multi-agent system design. In particular, it is addressed how a compositional

Developing Earth System Science Courses and Programs at Minority Serving Institutions

Science.gov (United States)

Johnson, D. R.; Jackson, C.; Ruzek, M.

2004-12-01

In the current NASA/USRA ESSE21 Program, emphasis is placed on the development of Earth System Science courses and degree offerings in Minority Serving Institutions (MSIs). Of the 18 colleges/universities being supported by NASA through USRA, 10 colleges/universities are MSIs. While there is recognition of the need for Earth system science courses, minors and degree programs by NASA and other agencies, within MSIs, a central challenge is how to provide a vision of the future opportunities in ESS and STEM disciplines that attracts and motivates students to these studies. Students need career guidance, role models and mentoring to encourage entry into STEM in general, and Earth system science in particular. Then there is the question of how to bring interested faculty together in institutions to form a critical mass that would forego the breadth and depth of disciplinary interests to undertake the development of multi/cross and interdisciplinary courses, minors and degree programs in ESS. Within the ESSE21 Diversity Working Group, the question has been raised as to how will MSIs ever be mainstream participants in ESS without teaching and engaging in research in remote sensing, modeling of the Earth's climate system and other like endeavors. Two other related questions raised within the Working Group are what are the long-term objectives of MSI adoption of ESS and what course corrections are needed to make ESS viable at MSIs. Within these considerations there are unresolved questions concerning the need and availability of resources from NASA, other agencies and local institutions. Apart from these larger considerations, efforts are underway within the ESSE21 Program that provide for sharing of resources among participants, organization of and access to materials that already exist, online resources, course outlines and successful listings for online resources by topics for particular courses and subject areas. The Lesson Learned Working Group, as well as the program

Multi-agent system for energy resource scheduling of integrated microgrids in a distributed system

International Nuclear Information System (INIS)

Logenthiran, T.; Srinivasan, Dipti; Khambadkone, Ashwin M.

2011-01-01

This paper proposes a multi-agent system for energy resource scheduling of an islanded power system with distributed resources, which consists of integrated microgrids and lumped loads. Distributed intelligent multi-agent technology is applied to make the power system more reliable, efficient and capable of exploiting and integrating alternative sources of energy. The algorithm behind the proposed energy resource scheduling has three stages. The first stage is to schedule each microgrid individually to satisfy its internal demand. The next stage involves finding the best possible bids for exporting power to the network and compete in a whole sale energy market. The final stage is to reschedule each microgrid individually to satisfy the total demand, which is the addition of internal demand and the demand from the results of the whole sale energy market simulation. The simulation results of a power system with distributed resources comprising three microgrids and five lumped loads show that the proposed multi-agent system allows efficient management of micro-sources with minimum operational cost. The case studies demonstrate that the system is successfully monitored, controlled and operated by means of the developed multi-agent system. (author)

Multi-agent system for energy resource scheduling of integrated microgrids in a distributed system

Energy Technology Data Exchange (ETDEWEB)

Logenthiran, T.; Srinivasan, Dipti; Khambadkone, Ashwin M. [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore)

2011-01-15

This paper proposes a multi-agent system for energy resource scheduling of an islanded power system with distributed resources, which consists of integrated microgrids and lumped loads. Distributed intelligent multi-agent technology is applied to make the power system more reliable, efficient and capable of exploiting and integrating alternative sources of energy. The algorithm behind the proposed energy resource scheduling has three stages. The first stage is to schedule each microgrid individually to satisfy its internal demand. The next stage involves finding the best possible bids for exporting power to the network and compete in a whole sale energy market. The final stage is to reschedule each microgrid individually to satisfy the total demand, which is the addition of internal demand and the demand from the results of the whole sale energy market simulation. The simulation results of a power system with distributed resources comprising three microgrids and five lumped loads show that the proposed multi-agent system allows efficient management of micro-sources with minimum operational cost. The case studies demonstrate that the system is successfully monitored, controlled and operated by means of the developed multi-agent system. (author)

Extended block diagram method for a multi-state system reliability assessment

International Nuclear Information System (INIS)

Lisnianski, Anatoly

2007-01-01

The presented method extends the classical reliability block diagram method to a repairable multi-state system. It is very suitable for engineering applications since the procedure is well formalized and based on the natural decomposition of the entire multi-state system (the system is represented as a collection of its elements). Until now, the classical block diagram method did not provide the reliability assessment for the repairable multi-state system. The straightforward stochastic process methods are very difficult for engineering application in such cases due to the 'dimension damnation'-huge number of system states. The suggested method is based on the combined random processes and the universal generating function technique and drastically reduces the number of states in the multi-state model

Multi-reactor power system configurations for multimegawatt nuclear electric propulsion

Science.gov (United States)

George, Jeffrey A.

1991-01-01

A modular, multi-reactor power system and vehicle configuration for piloted nuclear electric propulsion (NEP) missions to Mars is presented. Such a design could provide enhanced system and mission reliability, allowing a comfortable safety margin for early manned flights, and would allow a range of piloted and cargo missions to be performed with a single power system design. Early use of common power modules for cargo missions would also provide progressive flight experience and validation of standardized systems for use in later piloted applications. System and mission analysis are presented to compare single and multi-reactor configurations for piloted Mars missions. A conceptual design for the Hydra modular multi-reactor NEP vehicle is presented.

MIMO wireless networks channels, techniques and standards for multi-antenna, multi-user and multi-cell systems

CERN Document Server

Clerckx, Bruno

2013-01-01

This book is unique in presenting channels, techniques and standards for the next generation of MIMO wireless networks. Through a unified framework, it emphasizes how propagation mechanisms impact the system performance under realistic power constraints. Combining a solid mathematical analysis with a physical and intuitive approach to space-time signal processing, the book progressively derives innovative designs for space-time coding and precoding as well as multi-user and multi-cell techniques, taking into consideration that MIMO channels are often far from ideal. Reflecting developments

multiPDEVS: A Parallel Multicomponent System Specification Formalism

Directory of Open Access Journals (Sweden)

Damien Foures

2018-01-01

Full Text Available Based on multiDEVS formalism, we introduce multiPDEVS, a parallel and nonmodular formalism for discrete event system specification. This formalism provides combined advantages of PDEVS and multiDEVS approaches, such as excellent simulation capabilities for simultaneously scheduled events and components able to influence each other using exclusively their state transitions. We next show the soundness of the formalism by giving a construction showing that any multiPDEVS model is equivalent to a PDEVS atomic model. We then present the simulation procedure associated, usually called abstract simulator. As a well-adapted formalism to express cellular automata, we finally propose to compare an implementation of multiPDEVS formalism with a more classical Cell-DEVS implementation through a fire spread application.

Multi agent gathering waste system

Directory of Open Access Journals (Sweden)

Álvaro LOZANO MURCIEGO

2016-07-01

Full Text Available Along this paper, we present a new multi agent-based system to gather waste on cities and villages. We have developed a low cost wireless sensor prototype to measure the volume level of the containers. Furthermore a route system is developed to optimize the routes of the trucks and a mobile application has been developed to help drivers in their working days. In order to evaluate and validate the proposed system a practical case study in a real city environment is modeled using open data available and with the purpose of identifying limitations of the system.

An institution for object-z with inheritance and polymorphism

DEFF Research Database (Denmark)

Baumeister, Hubert; Bettaz, Mohamed; Maouche, Mourad

2015-01-01

logical systems and their connections. This is the foundation of multi-modelling languages allowing one to deal with heterogeneous specifications in a consistent way. To make Object-Z accessible as part of such a multi-modelling language, we define the institution OZS for Object-Z. We have chosen Object......-Z in part because it is a prominent software modelling language and in part because it allows us to study the formalisation of object-oriented concepts, like object identity, object state, dynamic behaviour, polymorphic sorts and inheritance....

IMPROVEMENT OF QUALITY ASSURANCE SYSTEM ACTIVITIES OF HIGHER EDUCATION INSTITUTIONS

Directory of Open Access Journals (Sweden)

Z. M. Sultalieva

2016-01-01

Full Text Available Abstract. The aim of the article is the improvement of quality assessment system of higher education institutions in the aspect of management. The problems of quality improvement are revealed and classified. The analysis of criteria assessment sets used to define the efficiency of higher education institutions activity is carried out. The components of quality of higher education institutions activity are specified. The structural model of quality assessment system of higher education institutions activity is offered. The analysis of macro environment of a university based on the method of strategic management is carried out, i.e. PEST analysis. As a result of the research a new model of macro criteria model of quality assessment system of higher education institutions, characterizing quality management as an approach to university efficiency is offered, moreover, this system can define the level of its competitiveness in the aspect of quality management. 

Multi-Institutional Validation of an OSATS for the Assessment of Cystoscopic and Ureteroscopic Skills.

Science.gov (United States)

Argun, Omer Burak; Chrouser, Kristin; Chauhan, Sanket; Monga, Manoj; Knudsen, Bodo; Box, Geoffrey N; Lee, David I; Gettman, Matthew T; Poniatowski, Lauren H; Wang, Qi; Reihsen, Troy E; Sweet, Robert M

2015-10-01

We evaluated the internal and construct validity of an assessment tool for cystoscopic and ureteroscopic cognitive and psychomotor skills at a multi-institutional level. Subjects included a total of 30 urology residents at Ohio State University, Columbus, Ohio; Penn Presbyterian Medical Center, Philadelphia, Pennsylvania; and Mayo Clinic, Rochester, Minnesota. A single external blinded reviewer evaluated cognitive and psychomotor skills associated with cystoscopic and ureteroscopic surgery using high fidelity bench models. Exercises included navigation, basketing and relocation; holmium laser lithotripsy; and cystoscope assembly. Each resident received a total cognitive score, checklist score and global psychomotor skills score. Construct validity was assessed by calculating correlations between training year and performance scores (both cognitive and psychomotor). Internal validity was confirmed by calculating correlations between test components. The median total cognitive score was 91 (IQR 86.25, 97). For psychomotor performance residents had a median total checklist score of 7 (IQR 5, 8) and a median global psychomotor skills score of 21 (IQR 18, 24.5). Construct validity was supported by the positive and statistically significant correlations between training year and total cognitive score (r = 0.66, 95% CI 0.39-0.82, p = 0.01), checklist scores (r = 0.66, 95% CI 0.35-0.84, p = 0.32) and global psychomotor skills score (r = 0.76, 95% CI 0.55-0.88, p = 0.002). The internal validity of OSATS was supported since total cognitive and checklist scores correlated with the global psychomotor skills score. In this multi-institutional study we successfully demonstrated the construct and internal validity of an objective assessment of cystoscopic and ureteroscopic cognitive and technical skills, including laser lithotripsy. Copyright © 2015 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Multi-Resonant-Activation for a System Only Driven by Multi-State Noise

International Nuclear Information System (INIS)

Li Jinghui

2010-01-01

We consider the escape of the particles over fluctuating potential barrier for a system only driven by a multi-state noise. It is shown that, the noise can make the particles escape over the fluctuating potential barrier in some circumstances; but in other circumstances, it can not. If the noise can make the particle escape over the fluctuating potential barrier, the mean first passage time (MFPT) can display the phenomenon of multi-resonant-activation. For this phenomenon, there are two kinds of resonant activation to appear. One is resonant activation for the MFPTs as the function of the flipping rates of the fluctuating potential barrier; the other is that for the MFPTs as the functions of the transition rates of the multi-state noise. (general)

Institutional analysis of health system governance.

Science.gov (United States)

Abimbola, Seye; Negin, Joel; Martiniuk, Alexandra L; Jan, Stephen

2017-11-01

It is important that researchers who study health system governance have a set of collective understandings of the meanings of governance, which can then inform the methods used in research. We present an institutional framing and definition of health system governance; that is, governance refers to making, changing, monitoring and enforcing the rules that govern the demand and supply of health services. This pervasive, relational view of governance is to be preferred to approaches that focus primarily on structures of governments and health care organizations, because health system governance involves communities and service users, and because governments in many low- and middle-income countries tend to under-govern. Therefore, the study of health system governance requires institutional analysis; an approach that focuses not only on structures, but also on the rules (both formal and informal) governing demand and supply relations. Using this 'structure-relations' lens, and based on our field experience, we discuss how this focus could be applied to the three approaches to framing and studying health system governance that we identified in the literature. In order of decreasing focus on structures ('hardware') and increasing focus on relations ('software'), they are: (1) the government-centred approach, which focuses on the role of governments, above or to the exclusion of non-government health system actors; (2) the building-block approach, which focuses on the internal workings of health care organizations, and treats governance as one of the several building blocks of organizations; and (3) the institutional approach, which focuses on how the rules governing social and economic interactions are made, changed, monitored and enforced. Notably, either or both qualitative and quantitative methods may be used by researchers in efforts to incorporate the analysis of how rules determine relations among health system actors into these three approaches to health system

Robustness analysis of pull strategies in multi-product systems

Directory of Open Access Journals (Sweden)

Chukwunonyelum Emmanuel Onyeocha

2015-09-01

Full Text Available Purpose: This paper examines the behaviour of shared and dedicated Kanban allocation policies of Hybrid Kanban-CONWIP and Basestock-Kanban-CONWIP control strategies in multi-product systems; with considerations to robustness of optimal solutions to environmental and system variabilities. Design/methodology/approach: Discrete event simulation and evolutionary multi-objective optimisation approach were utilised to develop Pareto-frontier or sets of non-dominated optimal solutions and for selection of an appropriate decision set for the control parameters in the shared Kanban allocation policy (S-KAP and dedicated Kanban allocation policy (D-KAP. Simulation experiments were carried out via ExtendSim simulation application software. The outcomes of PCS+KAP performances were compared via all pairwise comparison and Nelson’s screening and selection procedure for superior PCS+KAP under negligible environmental and system stability. To determine superior PCS+KAP under systems’ and environmental variability, the optimal solutions were tested for robustness using Latin hypercube sampling technique and stochastic dominance test. Findings: The outcome of this study shows that under uncontrollable environmental variability, dedicated Kanban allocation policy outperformed shared Kanban allocation policy in serial manufacturing system with negligible and in complex assembly line with setup times. Moreover, the BK-CONWIP is shown as superior strategy to HK-CONWIP. Research limitations/implications: Future research should be conducted to verify the level of flexibility of BK-CONWIP with respect to product mix and product demand volume variations in a complex multi-product system Practical implications: The outcomes of this work are applicable to multi-product manufacturing industries with significant setup times and systems with negligible setup times. The multi-objective optimisation provides decision support for selection of control-parameters such that

State distribution and reliability of some multi- state systems with ...

African Journals Online (AJOL)

mn : G series systems and second, the multi-state consecutive kn-out-of-mn : G parallel systems (see denitions 1 and 2).We begin by giving a non recursive formula which calculates the state distribution and the reliability of multi-state ...

Advances on Practical Applications of Agents and Multi-Agent Systems 10th International Conference on Practical Applications of Agents and Multi-Agent Systems

CERN Document Server

Müller, Jörg; Rodríguez, Juan; Pérez, Javier

2012-01-01

Research on Agents and Multi-Agent Systems has matured during the last decade and many effective applications of this technology are now deployed. PAAMS provides an international forum to present and discuss the latest scientific developments and their effective applications, to assess the impact of the approach, and to facilitate technology transfer. PAAMS started as a local initiative, but has since grown to become THE international yearly platform to present, to discuss, and to disseminate the latest developments and the most important outcomes related to real-world applications. It provides a unique opportunity to bring multi-disciplinary experts, academics and practitioners together to exchange their experience in the development and deployment of Agents and Multi-Agent Systems. PAAMS intends to bring together researchers and developers from industry and the academic world to report on the latest scientific and technical advances on the application of multi-agent systems, to discuss and debate the major ...

Highlights on Practical Applications of Agents and Multi-Agent Systems 10th International Conference on Practical Applications of Agents and Multi-Agent Systems

CERN Document Server

Sánchez, Miguel; Mathieu, Philippe; Rodríguez, Juan; Adam, Emmanuel; Ortega, Alfonso; Moreno, María; Navarro, Elena; Hirsch, Benjamin; Lopes-Cardoso, Henrique; Julián, Vicente

2012-01-01

Research on Agents and Multi-Agent Systems has matured during the last decade and many effective applications of this technology are now deployed. PAAMS provides an international forum to present and discuss the latest scientific developments and their effective applications, to assess the impact of the approach, and to facilitate technology transfer. PAAMS started as a local initiative, but has since grown to become THE international yearly platform to present, to discuss, and to disseminate the latest developments and the most important outcomes related to real-world applications. It provides a unique opportunity to bring multi-disciplinary experts, academics and practitioners together to exchange their experience in the development and deployment of Agents and Multi-Agent Systems. PAAMS intends to bring together researchers and developers from industry and the academic world to report on the latest scientific and technical advances on the application of multi-agent systems, to discuss and debate the major ...

A meta-ontological framework for multi-agent systems design

OpenAIRE

Sokolova, Marina; Fernández Caballero, Antonio

2007-01-01

The paper introduces an approach to using a meta-ontology framework for complex multi-agent systems design, and illustrates it in an application related to ecological-medical issues. The described shared ontology is pooled from private sub-ontologies, which represent a problem area ontology, an agent ontology, a task ontology, an ontology of interactions, and the multi-agent system architecture ontology.

Performance Assessment Institute-NV

Energy Technology Data Exchange (ETDEWEB)

Lombardo, Joesph [Univ. of Nevada, Las Vegas, NV (United States)

2012-12-31

The National Supercomputing Center for Energy and the Environment’s intention is to purchase a multi-purpose computer cluster in support of the Performance Assessment Institute (PA Institute). The PA Institute will serve as a research consortium located in Las Vegas Nevada with membership that includes: national laboratories, universities, industry partners, and domestic and international governments. This center will provide a one-of-a-kind centralized facility for the accumulation of information for use by Institutions of Higher Learning, the U.S. Government, and Regulatory Agencies and approved users. This initiative will enhance and extend High Performance Computing (HPC) resources in Nevada to support critical national and international needs in "scientific confirmation". The PA Institute will be promoted as the leading Modeling, Learning and Research Center worldwide. The program proposes to utilize the existing supercomputing capabilities and alliances of the University of Nevada Las Vegas as a base, and to extend these resource and capabilities through a collaborative relationship with its membership. The PA Institute will provide an academic setting for interactive sharing, learning, mentoring and monitoring of multi-disciplinary performance assessment and performance confirmation information. The role of the PA Institute is to facilitate research, knowledge-increase, and knowledge-sharing among users.

Optimal maintenance of multi-component systems: a review

NARCIS (Netherlands)

R.P. Nicolai (Robin); R. Dekker (Rommert)

2006-01-01

textabstractIn this article we give an overview of the literature on multi-component maintenance optimization. We focus on work appearing since the 1991 survey "A survey of maintenance models for multi-unit systems" by Cho and Parlar. This paper builds forth on the review article by Dekker et al.

Onboard autonomous mission re-planning for multi-satellite system

Science.gov (United States)

Zheng, Zixuan; Guo, Jian; Gill, Eberhard

2018-04-01

This paper presents an onboard autonomous mission re-planning system for Multi-Satellites System (MSS) to perform onboard re-planing in disruptive situations. The proposed re-planning system can deal with different potential emergency situations. This paper uses Multi-Objective Hybrid Dynamic Mutation Genetic Algorithm (MO-HDM GA) combined with re-planning techniques as the core algorithm. The Cyclically Re-planning Method (CRM) and the Near Real-time Re-planning Method (NRRM) are developed to meet different mission requirements. Simulations results show that both methods can provide feasible re-planning sequences under unforeseen situations. The comparisons illustrate that using the CRM is average 20% faster than the NRRM on computation time. However, by using the NRRM more raw data can be observed and transmitted than using the CRM within the same period. The usability of this onboard re-planning system is not limited to multi-satellite system. Other mission planning and re-planning problems related to autonomous multiple vehicles with similar demands are also applicable.

A financial network perspective of financial institutions' systemic risk contributions

Science.gov (United States)

Huang, Wei-Qiang; Zhuang, Xin-Tian; Yao, Shuang; Uryasev, Stan

2016-08-01

This study considers the effects of the financial institutions' local topology structure in the financial network on their systemic risk contribution using data from the Chinese stock market. We first measure the systemic risk contribution with the Conditional Value-at-Risk (CoVaR) which is estimated by applying dynamic conditional correlation multivariate GARCH model (DCC-MVGARCH). Financial networks are constructed from dynamic conditional correlations (DCC) with graph filtering method of minimum spanning trees (MSTs). Then we investigate dynamics of systemic risk contributions of financial institution. Also we study dynamics of financial institution's local topology structure in the financial network. Finally, we analyze the quantitative relationships between the local topology structure and systemic risk contribution with panel data regression analysis. We find that financial institutions with greater node strength, larger node betweenness centrality, larger node closeness centrality and larger node clustering coefficient tend to be associated with larger systemic risk contributions.

"Less Clicking, More Watching": Results from the User-Centered Design of a Multi-Institutional Web Site for Art and Culture.

Science.gov (United States)

Vergo, John; Karat, Clare-Marie; Karat, John; Pinhanez, Claudio; Arora, Renee; Cofino, Thomas; Riecken, Doug; Podlaseck, Mark

This paper summarizes a 10-month long research project conducted at the IBM T.J. Watson Research Center aimed at developing the design concept of a multi-institutional art and culture web site. The work followed a user-centered design (UCD) approach, where interaction with prototypes and feedback from potential users of the web site were sought…

Relative contributions of individual, institutional and system factors ...

African Journals Online (AJOL)

This study investigated the relative contributions of individual, institutional and system factors to utilisation of Research4Life databases by scientists in the National Agricultural Research Institutes (NARIs) in Nigeria. The study adopted the descriptive survey research design of the correlational type. Simple and stratified ...

TTI Phase 2 Institutional Support: Institute for Policy Analysis and ...

International Development Research Centre (IDRC) Digital Library (Canada)

... and Research's (IPAR-Rwanda) role as a credible public policy institution in ... TTI is a multi-funder program dedicated to strengthening independent policy ... IDRC congratulates first cohort of Women in Climate Change Science Fellows.

Measuring Performance of Soft Real-Time Tasks on Multi-core Systems

OpenAIRE

Rafiq, Salman

2011-01-01

Multi-core platforms are well established, and they are slowly moving into the area of embedded and real-time systems. Nowadays to take advantage of multi-core systems in terms of throughput, soft real-time applications are run together with general purpose applications under an operating system such as Linux. But due to shared hardware resources in multi-core architectures, it is likely that these applications will interfere and compete with each other. This can cause slower response times f...

Radiomic features for prostate cancer detection on MRI differ between the transition and peripheral zones: Preliminary findings from a multi-institutional study.

Science.gov (United States)

Ginsburg, Shoshana B; Algohary, Ahmad; Pahwa, Shivani; Gulani, Vikas; Ponsky, Lee; Aronen, Hannu J; Boström, Peter J; Böhm, Maret; Haynes, Anne-Maree; Brenner, Phillip; Delprado, Warick; Thompson, James; Pulbrock, Marley; Taimen, Pekka; Villani, Robert; Stricker, Phillip; Rastinehad, Ardeshir R; Jambor, Ivan; Madabhushi, Anant

2017-07-01

To evaluate in a multi-institutional study whether radiomic features useful for prostate cancer (PCa) detection from 3 Tesla (T) multi-parametric MRI (mpMRI) in the transition zone (TZ) differ from those in the peripheral zone (PZ). 3T mpMRI, including T2-weighted (T2w), apparent diffusion coefficient (ADC) maps, and dynamic contrast-enhanced MRI (DCE-MRI), were retrospectively obtained from 80 patients at three institutions. This study was approved by the institutional review board of each participating institution. First-order statistical, co-occurrence, and wavelet features were extracted from T2w MRI and ADC maps, and contrast kinetic features were extracted from DCE-MRI. Feature selection was performed to identify 10 features for PCa detection in the TZ and PZ, respectively. Two logistic regression classifiers used these features to detect PCa and were evaluated by area under the receiver-operating characteristic curve (AUC). Classifier performance was compared with a zone-ignorant classifier. Radiomic features that were identified as useful for PCa detection differed between TZ and PZ. When classification was performed on a per-voxel basis, a PZ-specific classifier detected PZ tumors on an independent test set with significantly higher accuracy (AUC = 0.61-0.71) than a zone-ignorant classifier trained to detect cancer throughout the entire prostate (P  0.14) were obtained for all institutions. A zone-aware classifier significantly improves the accuracy of cancer detection in the PZ. 3 Technical Efficacy: Stage 2 J. MAGN. RESON. IMAGING 2017;46:184-193. © 2016 International Society for Magnetic Resonance in Medicine.

Fault-Tolerant Consensus of Multi-Agent System With Distributed Adaptive Protocol.

Science.gov (United States)

Chen, Shun; Ho, Daniel W C; Li, Lulu; Liu, Ming

2015-10-01

In this paper, fault-tolerant consensus in multi-agent system using distributed adaptive protocol is investigated. Firstly, distributed adaptive online updating strategies for some parameters are proposed based on local information of the network structure. Then, under the online updating parameters, a distributed adaptive protocol is developed to compensate the fault effects and the uncertainty effects in the leaderless multi-agent system. Based on the local state information of neighboring agents, a distributed updating protocol gain is developed which leads to a fully distributed continuous adaptive fault-tolerant consensus protocol design for the leaderless multi-agent system. Furthermore, a distributed fault-tolerant leader-follower consensus protocol for multi-agent system is constructed by the proposed adaptive method. Finally, a simulation example is given to illustrate the effectiveness of the theoretical analysis.

A methodology for designing flexible multi-generation systems

DEFF Research Database (Denmark)

Lythcke-Jørgensen, Christoffer Ernst; Viana Ensinas, Adriano; Münster, Marie

2016-01-01

An FMG (flexible multi-generation system) consists of integrated and flexibly operated facilities that provide multiple links between the various layers of the energy system. FMGs may facilitate integration and balancing of fluctuating renewable energy sources in the energy system in a cost...... is based on consideration of the following points: Selection, location and dimensioning of processes; systematic heat and mass integration; flexible operation optimization with respect to both short-term market fluctuations and long-term energy system development; global sensitivity and uncertainty...... analysis; biomass supply chains; variable part-load performance; and multi-objective optimization considering economic and environmental performance. Tested in a case study, the methodology is proved effective in screening the solution space for efficient FMG designs, in assessing the importance...

Analysing Information Systems Security In Higher Learning Institutions Of Uganda

OpenAIRE

Mugyenyi Raymond

2017-01-01

Information communication technology has increased globalisation in higher learning institution all over the world. This has been achieved through introduction of systems that ease operations related to information handling in the institutions. The paper assessed and analysed the information systems security performance status in higher learning institutions of Uganda. The existing policies that govern the information security have also been analysed together with the current status of inform...

Energy-dissipation-model for metallurgical multi-phase-systems

Energy Technology Data Exchange (ETDEWEB)

Mavrommatis, K.T. [Rheinisch-Westfaelische Technische Hochschule Aachen, Aachen (Germany)

1996-12-31

Entropy production in real processes is directly associated with the dissipation of energy. Both are potential measures for the proceed of irreversible processes taking place in metallurgical systems. Many of these processes in multi-phase-systems could then be modelled on the basis of the energy-dissipation associated with. As this entity can often be estimated using very simple assumptions from first principles, the evolution of an overall measure of systems behaviour can be studied constructing an energy-dissipation -based model of the system. In this work a formulation of this concept, the Energy-Dissipation-Model (EDM), for metallurgical multi-phase-systems is given. Special examples are studied to illustrate the concept, and benefits as well as the range of validity are shown. This concept might be understood as complement to usual CFD-modelling of complex systems on a more abstract level but reproducing essential attributes of complex metallurgical systems. (author)

Energy-dissipation-model for metallurgical multi-phase-systems

Energy Technology Data Exchange (ETDEWEB)

Mavrommatis, K T [Rheinisch-Westfaelische Technische Hochschule Aachen, Aachen (Germany)

1997-12-31

Entropy production in real processes is directly associated with the dissipation of energy. Both are potential measures for the proceed of irreversible processes taking place in metallurgical systems. Many of these processes in multi-phase-systems could then be modelled on the basis of the energy-dissipation associated with. As this entity can often be estimated using very simple assumptions from first principles, the evolution of an overall measure of systems behaviour can be studied constructing an energy-dissipation -based model of the system. In this work a formulation of this concept, the Energy-Dissipation-Model (EDM), for metallurgical multi-phase-systems is given. Special examples are studied to illustrate the concept, and benefits as well as the range of validity are shown. This concept might be understood as complement to usual CFD-modelling of complex systems on a more abstract level but reproducing essential attributes of complex metallurgical systems. (author)

An investigation into the organisation and structural design of multi-computer process-control systems

International Nuclear Information System (INIS)

Gertenbach, W.P.

1981-12-01

A multi-computer system for the collection of data and control of distributed processes has been developed. The structure and organisation of this system, a study of the general theory of systems and of modularity was used as a basis for an investigation into the organisation and structured design of multi-computer process-control systems. A multi-dimensional model of multi-computer process-control systems was developed. In this model a strict separation was made between organisational properties of multi-computer process-control systems and implementation dependant properties. The model was based on the principles of hierarchical analysis and modularity. Several notions of hierarchy were found necessary to describe fully the organisation of multi-computer systems. A new concept, that of interconnection abstraction was identified. This concept is an extrapolation of implementation techniques in the hardware implementation area to the software implementation area. A synthesis procedure which relies heavily on the above described analysis of multi-computer process-control systems is proposed. The above mentioned model, and a set of performance factors which depend on a set of identified design criteria, were used to constrain the set of possible solutions to the multi-computer process-control system synthesis-procedure

Multi-Province Listeriosis Outbreak Linked to Contaminated Deli Meat Consumed Primarily in Institutional Settings, Canada, 2008.

Science.gov (United States)

Currie, Andrea; Farber, Jeffrey M; Nadon, Céline; Sharma, Davendra; Whitfield, Yvonne; Gaulin, Colette; Galanis, Eleni; Bekal, Sadjia; Flint, James; Tschetter, Lorelee; Pagotto, Franco; Lee, Brenda; Jamieson, Fred; Badiani, Tina; MacDonald, Diane; Ellis, Andrea; May-Hadford, Jennifer; McCormick, Rachel; Savelli, Carmen; Middleton, Dean; Allen, Vanessa; Tremblay, Francois-William; MacDougall, Laura; Hoang, Linda; Shyng, Sion; Everett, Doug; Chui, Linda; Louie, Marie; Bangura, Helen; Levett, Paul N; Wilkinson, Krista; Wylie, John; Reid, Janet; Major, Brian; Engel, Dave; Douey, Donna; Huszczynski, George; Di Lecci, Joe; Strazds, Judy; Rousseau, Josée; Ma, Kenneth; Isaac, Leah; Sierpinska, Urszula

2015-08-01

A multi-province outbreak of listeriosis occurred in Canada from June to November 2008. Fifty-seven persons were infected with 1 of 3 similar outbreak strains defined by pulsed-field gel electrophoresis, and 24 (42%) individuals died. Forty-one (72%) of 57 individuals were residents of long-term care facilities or hospital inpatients during their exposure period. Descriptive epidemiology, product traceback, and detection of the outbreak strains of Listeria monocytogenes in food samples and the plant environment confirmed delicatessen meat manufactured by one establishment and purchased primarily by institutions was the source of the outbreak. The food safety investigation identified a plant environment conducive to the introduction and proliferation of L. monocytogenes and persistently contaminated with Listeria spp. This outbreak demonstrated the need for improved listeriosis surveillance, strict control of L. monocytogenes in establishments producing ready-to-eat foods, and advice to vulnerable populations and institutions serving these populations regarding which high-risk foods to avoid.

Compositional Verification of Multi-Station Interlocking Systems

DEFF Research Database (Denmark)

Macedo, Hugo Daniel dos Santos; Fantechi, Alessandro; Haxthausen, Anne Elisabeth

2016-01-01

pose a big challenge to current verification methodologies, due to the explosion of state space size as soon as large, if not medium sized, multi-station systems have to be controlled. For these reasons, verification techniques that exploit locality principles related to the topological layout...... of the controlled system to split in different ways the state space have been investigated. In particular, compositional approaches divide the controlled track network in regions that can be verified separately, once proper assumptions are considered on the way the pieces are glued together. Basing on a successful...... method to verify the size of rather large networks, we propose a compositional approach that is particularly suitable to address multi-station interlocking systems which control a whole line composed of stations linked by mainline tracks. Indeed, it turns out that for such networks, and for the adopted...

The multi-camera optical surveillance system (MOS)

International Nuclear Information System (INIS)

Otto, P.; Wagner, H.; Richter, B.; Gaertner, K.J.; Laszlo, G.; Neumann, G.

1991-01-01

The transition from film camera to video surveillance systems, in particular the implementation of high capacity multi-camera video systems, results in a large increase in the amount of recorded scenes. Consequently, there is a substantial increase in the manpower requirements for review. Moreover, modern microprocessor controlled equipment facilitates the collection of additional data associated with each scene. Both the scene and the annotated information have to be evaluated by the inspector. The design of video surveillance systems for safeguards necessarily has to account for both appropriate recording and reviewing techniques. An aspect of principal importance is that the video information is stored on tape. Under the German Support Programme to the Agency a technical concept has been developed which aims at optimizing the capabilities of a multi-camera optical surveillance (MOS) system including the reviewing technique. This concept is presented in the following paper including a discussion of reviewing and reliability

Market development study for active solar thermal systems in the institutional, commercial and industrial sectors : final report

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Promising market opportunities for the sale of Active Solar Thermal Systems (ASTS) in the institutional, commercial and industrial sectors of the Canadian economy were examined in an effort to identify the main factors for success and the barriers to development of the ASTS market. This report described some of the action plans which could help Natural Resources Canada and the industry to develop these markets. It was noted that a promising ASTS application should have a substantial market. Some of the promising applications for ASTS include air heating applications such as: (1) make-up air to an industrial facility, particularly one that requires a high rate of air flow or air layer destratification, such as in welding operations, paint shops or vehicle maintenance facilities, (2) ventilation to a high-walled commercial or institutional building that requires high air flow such as in schools, recreational facilities, multi-residential or retail buildings, and (3) slow drying applications for crops, lumber or other materials. Promising water heating applications include: (1) high volume low temperature rise applications such as in swimming pools, (2) domestic hot water to high density accommodations such as in hotels, multi-unit dwellings, college residences and military barracks, (3) domestic hot water to an isolated location such as campgrounds or lodges, and (4) process hot water used for water washing in industry, restaurants, farms and car washes. This study concluded that there are many opportunities for sales of ASTS to the institutional, commercial and industrial sectors, but combined efforts are needed by committed members of the community to take advantage of these opportunities. 15 refs., 11 tabs., 2 figs., 4 append.

Optimization Models and Methods Developed at the Energy Systems Institute

OpenAIRE

N.I. Voropai; V.I. Zorkaltsev

2013-01-01

The paper presents shortly some optimization models of energy system operation and expansion that have been created at the Energy Systems Institute of the Siberian Branch of the Russian Academy of Sciences. Consideration is given to the optimization models of energy development in Russia, a software package intended for analysis of power system reliability, and model of flow distribution in hydraulic systems. A general idea of the optimization methods developed at the Energy Systems Institute...

NASA's Solar System Exploration Research Virtual Institute: Merging Science and Exploration

Science.gov (United States)

Pendleton, Yvonne J.

2016-10-01

Established in 2013, through joint funding from the NASA Science Mission Directorate (SMD) and Human Exploration and Operations Mission Directorate (HEOMD), NASA's Solar System Exploration Research Virtual Institute (SSERVI) is focused on science at the intersection of these two enterprises. Addressing questions of value to the human exploration program that also represent important research relevant to planetary science, SSERVI creates a bridge between HEOMD and SMD. The virtual institute model reduces travel costs, but its primary virtue is the ability to join together colleagues who bring the right expertise, techniques and tools, regardless of their physical location, to address multi-faceted problems, at a deeper level than could be achieved through the typical period of smaller research grants. In addition, collaboration across team lines and international borders fosters the creation of new knowledge, especially at the intersections of disciplines that might not otherwise overlap.SSERVI teams investigate the Moon, Near-Earth Asteroids, and the moons of Mars, addressing questions fundamental to these target bodies and their near space environments. The institute is currently composed of nine U.S. teams of 30-50 members each, distributed geographically across the United States, ten international partners, and a Central Office located at NASA Ames Research Center in Silicon Valley, CA. U.S. teams are competitively selected through peer-reviewed proposals submitted to NASA every 2-3 years, in response to a Cooperative Agreement Notice (CAN). The current teams were selected under CAN-1, with funding for five years (2014-2019). A smaller, overlapping set of teams are expected to be added in 2017 in response to CAN-2, thereby providing continuity and a firm foundation for any directional changes NASA requires as the CAN-1 teams end their term. This poster describes the research areas and composition of the institute to introduce SSERVI to the broader planetary

Recommending the heterogeneous cluster type multi-processor system computing

International Nuclear Information System (INIS)

Iijima, Nobukazu

2010-01-01

Real-time reactor simulator had been developed by reusing the equipment of the Musashi reactor and its performance improvement became indispensable for research tools to increase sampling rate with introduction of arithmetic units using multi-Digital Signal Processor(DSP) system (cluster). In order to realize the heterogeneous cluster type multi-processor system computing, combination of two kinds of Control Processor (CP) s, Cluster Control Processor (CCP) and System Control Processor (SCP), were proposed with Large System Control Processor (LSCP) for hierarchical cluster if needed. Faster computing performance of this system was well evaluated by simulation results for simultaneous execution of plural jobs and also pipeline processing between clusters, which showed the system led to effective use of existing system and enhancement of the cost performance. (T. Tanaka)

The nitrogen footprint tool network: a multi-institution program ...

Science.gov (United States)

Anthropogenic sources of reactive nitrogen have local and global impacts on air and water quality and detrimental effects on human and ecosystem health. This paper uses the nitrogen footprint tool (NFT) to determine the amount of nitrogen (N) released as a result of institutional consumption. The sectors accounted for include food (consumption and the upstream production), energy, transportation, fertilizer, research animals, and agricultural research. The NFT is then used for scenario analysis to manage and track reductions to institution N footprints, which are driven by the consumption behaviors of both the institution itself and its constituent individuals. In this paper, the first seven institution N footprint results are presented. The institution NFT network aims to develop footprints for many institutions to encourage widespread upper-level management strategies that will create significant reductions in reactive N released to the environment. Energy use and food purchases are the two largest contributors to institution N footprints. Ongoing efforts by institutions to reduce greenhouse gas emissions also help to reduce the N footprint, but the impact of food production on N pollution has not been directly addressed by the higher-ed sustainability community. The NFT Network found that institutions could reduce their N footprints by optimizing food purchasing to reduce consumption of animal products and minimize food waste, as well as reducing dependence o

Potential of Multi-Winglet Systems to Improve Aircraft Performance

OpenAIRE

Berens, Martin

2008-01-01

Gegenstand der vorliegenden Arbeit ist die Untersuchung des Potenzials von Multi-Winglet Konfigurationen zur Leistungssteigerung von Flugzeugen. Multi-Winglet Systeme sind aus der Vogelwelt bekannt. Die offensichtliche Diskrepanz zwischen dem Erfolg der Multi-Winglet Konfiguration in der Natur sowie dem theoretisch großen Potenzial zur Verringerung des induzierten Widerstands und der damit verbundenen Abschwächung der Intensität der Nachlaufwirbel auf der einen und den gleichzeitig mäßigen Er...

The Social System Approach to Institutions: Examples from Western Economic History

Directory of Open Access Journals (Sweden)

Solomon I. Cohen

2016-09-01

Full Text Available While there is a general acceptance of a broad definition of social institutions as accepted rules of conduct in agent interactions, there are overlapping views on how institutions come into being and develop. Different views see institutions as the result of evolution, contract, convention, game theory, political power, or legal necessity. Once created, institutions can live their own life and gain influence on the whole economy/society in respects beyond their intrinsic origins. The overlapping views give the impression of pursued piecemeal approaches in addressing the issues. Treating issues of institutional formation and development in the framework of social system theory and analysis can be shown to simplify the picture appreciably and bring more insight. This paper intends to do that. It will display and apply the social system perspective to understanding institutional formation and development. The paper falls in two sections. First, it develops an analytical framework that views the economy as a social system with interactive subsystems that initiate and maintain their own subsystem institutions. Some subsystems expand faster than others, gaining more influence. Interaction of agents across subsystems facilitates the dominance of the more influential subsystem and the spread of the subsystem’s allied institutions to the whole social system. Second, the paper illustrates the validity of the social system perspective via reviewing a timeline that highlights the changing and evolving dominance of the major subsystems and their attached institutions in the economic history of the western world, and in particular, the interactions between the firm subsystem and the state subsystem.

Asymptotic behavior of solutions of linear multi-order fractional differential equation systems

OpenAIRE

Diethelm, Kai; Siegmund, Stefan; Tuan, H. T.

2017-01-01

In this paper, we investigate some aspects of the qualitative theory for multi-order fractional differential equation systems. First, we obtain a fundamental result on the existence and uniqueness for multi-order fractional differential equation systems. Next, a representation of solutions of homogeneous linear multi-order fractional differential equation systems in series form is provided. Finally, we give characteristics regarding the asymptotic behavior of solutions to some classes of line...

A university system's approach to enhancing the educational mission of health science schools and institutions: the University of Texas Academy of Health Science Education

Directory of Open Access Journals (Sweden)

L. Maximilian Buja

2013-03-01

Full Text Available Background: The academy movement developed in the United States as an important approach to enhance the educational mission and facilitate the recognition and work of educators at medical schools and health science institutions. Objectives: Academies initially formed at individual medical schools. Educators and leaders in The University of Texas System (the UT System, UTS recognized the academy movement as a means both to address special challenges and pursue opportunities for advancing the educational mission of academic health sciences institutions. Methods: The UTS academy process was started by the appointment of a Chancellor's Health Fellow for Education in 2004. Subsequently, the University of Texas Academy of Health Science Education (UTAHSE was formed by bringing together esteemed faculty educators from the six UTS health science institutions. Results: Currently, the UTAHSE has 132 voting members who were selected through a rigorous, system-wide peer review and who represent multiple professional backgrounds and all six campuses. With support from the UTS, the UTAHSE has developed and sustained an annual Innovations in Health Science Education conference, a small grants program and an Innovations in Health Science Education Award, among other UTS health science educational activities. The UTAHSE represents one university system's innovative approach to enhancing its educational mission through multi- and interdisciplinary as well as inter-institutional collaboration. Conclusions: The UTAHSE is presented as a model for the development of other consortia-type academies that could involve several components of a university system or coalitions of several institutions.

Enzyme-sharing as a cause of multi-stationarity in signalling systems

DEFF Research Database (Denmark)

Feliu, Elisenda; Wiuf, Carsten

2012-01-01

Multi-stationarity in biological systems is a mechanism of cellular decision-making. In particular, signalling pathways regulated by protein phosphorylation display features that facilitate a variety of responses to different biological inputs. The features that lead to multi-stationarity are of ......Multi-stationarity in biological systems is a mechanism of cellular decision-making. In particular, signalling pathways regulated by protein phosphorylation display features that facilitate a variety of responses to different biological inputs. The features that lead to multi......-stationarity are of particular interest to determine, as well as the stability, properties of the steady states. In this paper, we determine conditions for the emergence of multi-stationarity in small motifs without feedback that repeatedly occur in signalling pathways. We derive an explicit mathematical relationship ¿ between...... identify characteristics of the motifs that lead to multi-stationarity, and extend the view that multi-stationarity in signalling pathways arises from multi-site phosphorylation. Our approach relies on mass-action kinetics, and the conclusions are drawn in full generality without resorting to simulations...

The evaluation of multi-structure, multi-atlas pelvic anatomy features in a prostate MR lymphography CAD system

Science.gov (United States)

Meijs, M.; Debats, O.; Huisman, H.

2015-03-01

In prostate cancer, the detection of metastatic lymph nodes indicates progression from localized disease to metastasized cancer. The detection of positive lymph nodes is, however, a complex and time consuming task for experienced radiologists. Assistance of a two-stage Computer-Aided Detection (CAD) system in MR Lymphography (MRL) is not yet feasible due to the large number of false positives in the first stage of the system. By introducing a multi-structure, multi-atlas segmentation, using an affine transformation followed by a B-spline transformation for registration, the organ location is given by a mean density probability map. The atlas segmentation is semi-automatically drawn with ITK-SNAP, using Active Contour Segmentation. Each anatomic structure is identified by a label number. Registration is performed using Elastix, using Mutual Information and an Adaptive Stochastic Gradient optimization. The dataset consists of the MRL scans of ten patients, with lymph nodes manually annotated in consensus by two expert readers. The feature map of the CAD system consists of the Multi-Atlas and various other features (e.g. Normalized Intensity and multi-scale Blobness). The voxel-based Gentleboost classifier is evaluated using ROC analysis with cross validation. We show in a set of 10 studies that adding multi-structure, multi-atlas anatomical structure likelihood features improves the quality of the lymph node voxel likelihood map. Multiple structure anatomy maps may thus make MRL CAD more feasible.

Mansion, A Distributed Multi-Agent System

NARCIS (Netherlands)

van t Noordende, G.; Brazier, F.M.; Tanenbaum, A.S.

2001-01-01

In this position summary we present work in progress on a worldwide, scalable multi-agent system, based on a paradigm of hyperlinked rooms. The framework offers facilities for managing distribution, security and mobility aspects for both active elements (agents) and passive elements (objects) in the

Distributed Cooperative Control of Nonlinear and Non-identical Multi-agent Systems

DEFF Research Database (Denmark)

Bidram, Ali; Lewis, Frank; Davoudi, Ali

2013-01-01

This paper exploits input-output feedback linearization technique to implement distributed cooperative control of multi-agent systems with nonlinear and non-identical dynamics. Feedback linearization transforms the synchronization problem for a nonlinear and heterogeneous multi-agent system...... for electric power microgrids. The effectiveness of the proposed control is verified by simulating a microgrid test system....

Negotiating designs of multi-purpose reservoir systems in international basins

Science.gov (United States)

Geressu, Robel; Harou, Julien

2016-04-01

Given increasing agricultural and energy demands, coordinated management of multi-reservoir systems could help increase production without further stressing available water resources. However, regional or international disputes about water-use rights pose a challenge to efficient expansion and management of many large reservoir systems. Even when projects are likely to benefit all stakeholders, agreeing on the design, operation, financing, and benefit sharing can be challenging. This is due to the difficulty of considering multiple stakeholder interests in the design of projects and understanding the benefit trade-offs that designs imply. Incommensurate performance metrics, incomplete knowledge on system requirements, lack of objectivity in managing conflict and difficulty to communicate complex issue exacerbate the problem. This work proposes a multi-step hybrid multi-objective optimization and multi-criteria ranking approach for supporting negotiation in water resource systems. The approach uses many-objective optimization to generate alternative efficient designs and reveal the trade-offs between conflicting objectives. This enables informed elicitation of criteria weights for further multi-criteria ranking of alternatives. An ideal design would be ranked as best by all stakeholders. Resource-sharing mechanisms such as power-trade and/or cost sharing may help competing stakeholders arrive at designs acceptable to all. Many-objective optimization helps suggests efficient designs (reservoir site, its storage size and operating rule) and coordination levels considering the perspectives of multiple stakeholders simultaneously. We apply the proposed approach to a proof-of-concept study of the expansion of the Blue Nile transboundary reservoir system.

A Multi-context BDI Recommender System: from Theory to Simulation

OpenAIRE

Ben Othmane , Amel; Tettamanzi , Andrea G. B.; Villata , Serena; Le Thanh , Nhan

2016-01-01

International audience; In this paper, a simulation of a multi-agent recommender system is presented and developed in the NetLogo platform. The specification of this recommender system is based on the well known Belief-Desire-Intention agent architecture applied to multi-context systems, extended with contexts foradditional reasoning abilities, especially social ones. The main goal of this simulation study is, besides illustrating the usefulness and feasibility of our agent-based recommender ...

An Evolutionary Approach for Optimizing Hierarchical Multi-Agent System Organization

OpenAIRE

Shen, Zhiqi; Yu, Ling; Yu, Han

2014-01-01

It has been widely recognized that the performance of a multi-agent system is highly affected by its organization. A large scale system may have billions of possible ways of organization, which makes it impractical to find an optimal choice of organization using exhaustive search methods. In this paper, we propose a genetic algorithm aided optimization scheme for designing hierarchical structures of multi-agent systems. We introduce a novel algorithm, called the hierarchical genetic algorithm...

Evolution of nuclear spectroscopy at Saha Institute of Nuclear Physics

Indian Academy of Sciences (India)

Currently Saha Institute is building a multi-element gamma heavy ion neutron array detector (MEGHNAD), which will have six high efficiency clover Ge detector together with charged particle ball and other accessories. The system is expected to be usable in 2002 and will be used in experiments using high energy heavy ...

Multi-Wavelength Photomagnetic Imaging for Oral Cancer

Science.gov (United States)

Marks, Michael

In this study, a multi-wavelength Photomagnetic Imaging (PMI) system is developed and evaluated with experimental studies.. PMI measures temperature increases in samples illuminated by near-infrared light sources using magnetic resonance thermometry. A multiphysics solver combining light and heat transfer models the spatiotemporal distribution of the temperature change. The PMI system develop in this work uses three lasers of varying wavelength (785 nm, 808 nm, 860 nm) to heat the sample. By using multiple wavelengths, we enable the PMI system to quantify the relative concentrations of optical contrast in turbid media and monitor their distribution, at a higher resolution than conventional diffuse optical imaging. The data collected from agarose phantoms with multiple embedded contrast agents designed to simulate the optical properties of oxy- and deoxy-hemoglobin is presented. The reconstructed images demonstrate that multi-wavelength PMI can resolve this complex inclusion structure with high resolution and recover the concentration of each contrast agent with high quantitative accuracy. The modified multi-wavelength PMI system operates under the maximum skin exposure limits defined by the American National Standards Institute, to enable future clinical applications.

Multi-Purpose X-ray System, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Stellarray proposes the development of a highly novel Multi-Purpose X-ray Source and System (MPXS), for use on flight missions, space stations, planetary excursions...

Cooperative control of multi-agent systems optimal and adaptive design approaches

CERN Document Server

Lewis, Frank L; Hengster-Movric, Kristian; Das, Abhijit

2014-01-01

Task complexity, communication constraints, flexibility and energy-saving concerns are all factors that may require a group of autonomous agents to work together in a cooperative manner. Applications involving such complications include mobile robots, wireless sensor networks, unmanned aerial vehicles (UAVs), spacecraft, and so on. In such networked multi-agent scenarios, the restrictions imposed by the communication graph topology can pose severe problems in the design of cooperative feedback control systems.  Cooperative control of multi-agent systems is a challenging topic for both control theorists and practitioners and has been the subject of significant recent research. Cooperative Control of Multi-Agent Systems extends optimal control and adaptive control design methods to multi-agent systems on communication graphs.  It develops Riccati design techniques for general linear dynamics for cooperative state feedback design, cooperative observer design, and cooperative dynamic output feedback design.  B...

Multi-Objective Optimization of Hybrid Renewable Energy System Using an Enhanced Multi-Objective Evolutionary Algorithm

Directory of Open Access Journals (Sweden)

Mengjun Ming

2017-05-01

Full Text Available Due to the scarcity of conventional energy resources and the greenhouse effect, renewable energies have gained more attention. This paper proposes methods for multi-objective optimal design of hybrid renewable energy system (HRES in both isolated-island and grid-connected modes. In each mode, the optimal design aims to find suitable configurations of photovoltaic (PV panels, wind turbines, batteries and diesel generators in HRES such that the system cost and the fuel emission are minimized, and the system reliability/renewable ability (corresponding to different modes is maximized. To effectively solve this multi-objective problem (MOP, the multi-objective evolutionary algorithm based on decomposition (MOEA/D using localized penalty-based boundary intersection (LPBI method is proposed. The algorithm denoted as MOEA/D-LPBI is demonstrated to outperform its competitors on the HRES model as well as a set of benchmarks. Moreover, it effectively obtains a good approximation of Pareto optimal HRES configurations. By further considering a decision maker’s preference, the most satisfied configuration of the HRES can be identified.

Multi-Modal Traveler Information System - Gateway Functional Requirements

Science.gov (United States)

1997-11-17

The Multi-Modal Traveler Information System (MMTIS) project involves a large number of Intelligent Transportation System (ITS) related tasks. It involves research of all ITS initiatives in the Gary-Chicago-Milwaukee (GCM) Corridor which are currently...

Iontophoretic transdermal drug delivery: a multi-layered approach.

Science.gov (United States)

Pontrelli, Giuseppe; Lauricella, Marco; Ferreira, José A; Pena, Gonçalo

2017-12-11

We present a multi-layer mathematical model to describe the transdermal drug release from an iontophoretic system. The Nernst-Planck equation describes the basic convection-diffusion process, with the electric potential obtained by solving the Laplace's equation. These equations are complemented with suitable interface and boundary conditions in a multi-domain. The stability of the mathematical problem is discussed in different scenarios and a finite-difference method is used to solve the coupled system. Numerical experiments are included to illustrate the drug dynamics under different conditions. © The authors 2016. Published by Oxford University Press on behalf of the Institute of Mathematics and its Applications. All rights reserved.

Multi-dimensional virtual system introduced to enhance canonical sampling

Science.gov (United States)

Higo, Junichi; Kasahara, Kota; Nakamura, Haruki

2017-10-01

When an important process of a molecular system occurs via a combination of two or more rare events, which occur almost independently to one another, computational sampling for the important process is difficult. Here, to sample such a process effectively, we developed a new method, named the "multi-dimensional Virtual-system coupled Monte Carlo (multi-dimensional-VcMC)" method, where the system interacts with a virtual system expressed by two or more virtual coordinates. Each virtual coordinate controls sampling along a reaction coordinate. By setting multiple reaction coordinates to be related to the corresponding rare events, sampling of the important process can be enhanced. An advantage of multi-dimensional-VcMC is its simplicity: Namely, the conformation moves widely in the multi-dimensional reaction coordinate space without knowledge of canonical distribution functions of the system. To examine the effectiveness of the algorithm, we introduced a toy model where two molecules (receptor and its ligand) bind and unbind to each other. The receptor has a deep binding pocket, to which the ligand enters for binding. Furthermore, a gate is set at the entrance of the pocket, and the gate is usually closed. Thus, the molecular binding takes place via the two events: ligand approach to the pocket and gate opening. In two-dimensional (2D)-VcMC, the two molecules exhibited repeated binding and unbinding, and an equilibrated distribution was obtained as expected. A conventional canonical simulation, which was 200 times longer than 2D-VcMC, failed in sampling the binding/unbinding effectively. The current method is applicable to various biological systems.

Multi-function nuclear weight scale system

International Nuclear Information System (INIS)

Zheng Mingquan; Sun Jinhua; Jia Changchun; Wang Mingqian; Tang Ke

1998-01-01

The author introduces the methods to contrive the hardware and software of a Multi-function Nuclear Weight Scale System based on the communication contract in compliance with RS485 between a master (industrial control computer 386) and a slave (single chip 8098) and its main functions

A MultiAir®/MultiFuel Approach to Enhancing Engine System Efficiency

Energy Technology Data Exchange (ETDEWEB)

Reese, Ronald [Chrysler Group LLC., Auburn Hills, MI (United States)

2015-05-20

FCA US LLC (formally known as Chrysler Group LLC, and hereinafter “Chrysler”) was awarded an American Recovery and Reinvestment Act (ARRA) funded project by the Department of Energy (DOE) titled “A MultiAir®/MultiFuel Approach to Enhancing Engine System Efficiency” (hereinafter “project”). This award was issued after Chrysler submitted a proposal for Funding Opportunity Announcement DE-FOA- 0000079, “Systems Level Technology Development, Integration, and Demonstration for Efficient Class 8 Trucks (SuperTruck) and Advanced Technology Powertrains for Light-Duty Vehicles (ATP-LD).” Chrysler started work on this project on June 01, 2010 and completed testing activities on August 30, 2014. Overall objectives of this project were; Demonstrate a 25% improvement in combined Federal Test Procedure (FTP) City and Highway fuel economy over a 2009 Chrysler minivan; Accelerate the development of highly efficient engine and powertrain systems for light-duty vehicles, while meeting future emissions standards; and Create and retain jobs in accordance with the American Recovery and Reinvestment Act of 2009

Analysis of multi-stage open shop processing systems

NARCIS (Netherlands)

Eggermont, C.E.J.; Schrijver, A.; Woeginger, G.J.; Schwentick, T.; Dürr, C.

2011-01-01

We study algorithmic problems in multi-stage open shop processing systems that are centered around reachability and deadlock detection questions. We characterize safe and unsafe system states. We show that it is easy to recognize system states that can be reached from the initial state (where the

Reimplementing a Multi-Agent System in Python

DEFF Research Database (Denmark)

Villadsen, Jørgen; Jensen, Andreas Schmidt; Ettienne, Mikko Berggren

2012-01-01

We provide a brief description of our Python-DTU system, including the overall design, the tools and the algorithms that we used in the Multi-Agent Programming Contest 2012, where the scenario was called Agents on Mars like in 2011. Our solution is an improvement of our Python-DTU system from last...

Reimplementing a Multi-Agent System in Python

DEFF Research Database (Denmark)

Villadsen, Jørgen; Jensen, Andreas Schmidt; Ettienne, Mikko Berggren

2013-01-01

We provide a brief description of our Python-DTU system, including the overall design, the tools and the algorithms that we used in the Multi-Agent Programming Contest 2012, where the scenario was called Agents on Mars like in 2011. Our solution is an improvement of our Python-DTU system from last...

Multi-Purpose X-ray System, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The proposed Multi-Purpose X-ray Source and System (MPXS) can be used on flight missions, space stations, planetary excursions and planetary or asteroid bases, to...

Multi-scale biomedical systems: measurement challenges

International Nuclear Information System (INIS)

Summers, R

2016-01-01

Multi-scale biomedical systems are those that represent interactions in materials, sensors, and systems from a holistic perspective. It is possible to view such multi-scale activity using measurement of spatial scale or time scale, though in this paper only the former is considered. The biomedical application paradigm comprises interactions that range from quantum biological phenomena at scales of 10-12 for one individual to epidemiological studies of disease spread in populations that in a pandemic lead to measurement at a scale of 10+7. It is clear that there are measurement challenges at either end of this spatial scale, but those challenges that relate to the use of new technologies that deal with big data and health service delivery at the point of care are also considered. The measurement challenges lead to the use, in many cases, of model-based measurement and the adoption of virtual engineering. It is these measurement challenges that will be uncovered in this paper. (paper)

Minmax defense strategy for complex multi-state systems

International Nuclear Information System (INIS)

Hausken, Kjell; Levitin, Gregory

2009-01-01

This paper presents a general optimization methodology that merges game theory and multi-state system survivability theory. The defender has multiple alternatives of defense strategy that presumes separation and protection of system elements. The attacker also has multiple alternatives of its attack strategy based on a combination of different possible attack actions against different groups of system elements. The defender minimizes, and the attacker maximizes, the expected damage caused by the attack (taking into account the unreliability of system elements and the multi-state nature of complex series-parallel systems). The problem is defined as a two-period minmax non-cooperative game between the defender who moves first and the attacker who moves second. An exhaustive minmax optimization algorithm is presented based on a double-loop genetic algorithm for determining the solution. A universal generating function technique is applied for evaluating the losses caused by system performance reduction. Illustrative examples with solutions are presented

IMPERA: Integrated Mission Planning for Multi-Robot Systems

Directory of Open Access Journals (Sweden)

Daniel Saur

2015-10-01

Full Text Available This paper presents the results of the project IMPERA (Integrated Mission Planning for Distributed Robot Systems. The goal of IMPERA was to realize an extraterrestrial exploration scenario using a heterogeneous multi-robot system. The main challenge was the development of a multi-robot planning and plan execution architecture. The robot team consists of three heterogeneous robots, which have to explore an unknown environment and collect lunar drill samples. The team activities are described using the language ALICA (A Language for Interactive Agents. Furthermore, we use the mission planning system pRoPhEt MAS (Reactive Planning Engine for Multi-Agent Systems to provide an intuitive interface to generate team activities. Therefore, we define the basic skills of our team with ALICA and define the desired goal states by using a logic description. Based on the skills, pRoPhEt MAS creates a valid ALICA plan, which will be executed by the team. The paper describes the basic components for communication, coordinated exploration, perception and object transportation. Finally, we evaluate the planning engine pRoPhEt MAS in the IMPERA scenario. In addition, we present further evaluation of pRoPhEt MAS in more dynamic environments.

A compact readout system for multi-pixel hybrid photodiodes

International Nuclear Information System (INIS)

Datema, C.P.; Meng, L.J.; Ramsden, D.

1999-01-01

Although the first Multi-pixel Hybrid Photodiode (M-HPD) was developed in the early 1990s by Delft Electronic Products, the main obstacle to its application has been the lack of availability of a compact read-out system. A fast, parallel readout system has been constructed for use with the earlier 25-pixel tube with High-energy Physics applications in mind. The excellent properties of the recently developed multi-pixel hybrid photodiodes (M-HPD) will be easier to exploit following the development of the new hybrid read-out circuits described in this paper. This system will enable all of the required read-out functions to be accommodate on a single board into which the M-HPD is plugged. The design and performance of a versatile system is described in which a trigger-signal, derived from the common-side of the silicon anode in the M-HPD, is used to trigger the readout of the 60-anode pixels in the M-HPD. The multi-channel amplifier section is based on the use of a new, commercial VLSI chip, whilst the read-out sequencer uses a chip of its own design. The common anode signal is processed by a fast amplifier and discriminator to provide a trigger signal when a single event is detected. In the prototype version, the serial analogue output data-stream is processed using a PC-mounted, high speed ADC. Results obtained using the new read-out system in a compact gamma-camera and with a small muon tracking-chamber demonstrate the low-noise performance of the system. The application of this read-out system in other position-sensitive or multi-anode photomultiplier tube applications are also described

10th International Conference on Practical Applications of Agents and Multi-Agent Systems

CERN Document Server

Pérez, Javier; Golinska, Paulina; Giroux, Sylvain; Corchuelo, Rafael; Trends in Practical Applications of Agents and Multiagent Systems

2012-01-01

PAAMS, the International Conference on Practical Applications of Agents and Multi-Agent Systems is an evolution of the International Workshop on Practical Applications of Agents and Multi-Agent Systems. PAAMS is an international yearly tribune to present, to discuss, and to disseminate the latest developments and the most important outcomes related to real-world applications. It provides a unique opportunity to bring multi-disciplinary experts, academics and practitioners together to exchange their experience in the development of Agents and Multi-Agent Systems.   This volume presents the papers that have been accepted for the 2012 in the workshops: Workshop on Agents for Ambient Assisted Living, Workshop on Agent-Based Solutions for Manufacturing and Supply Chain and Workshop on Agents and Multi-agent systems for Enterprise Integration.

Design and implementation of real-time multi-sensor vision systems

CERN Document Server

Popovic, Vladan; Cogal, Ömer; Akin, Abdulkadir; Leblebici, Yusuf

2017-01-01

This book discusses the design of multi-camera systems and their application to fields such as the virtual reality, gaming, film industry, medicine, automotive industry, drones, etc.The authors cover the basics of image formation, algorithms for stitching a panoramic image from multiple cameras, and multiple real-time hardware system architectures, in order to have panoramic videos. Several specific applications of multi-camera systems are presented, such as depth estimation, high dynamic range imaging, and medical imaging.

Salvage radical prostatectomy for radiation-recurrent prostate cancer: a multi-institutional collaboration.

Science.gov (United States)

Chade, Daher C; Shariat, Shahrokh F; Cronin, Angel M; Savage, Caroline J; Karnes, R Jeffrey; Blute, Michael L; Briganti, Alberto; Montorsi, Francesco; van der Poel, Henk G; Van Poppel, Hendrik; Joniau, Steven; Godoy, Guilherme; Hurtado-Coll, Antonio; Gleave, Martin E; Dall'Oglio, Marcos; Srougi, Miguel; Scardino, Peter T; Eastham, James A

2011-08-01

Oncologic outcomes in men with radiation-recurrent prostate cancer (PCa) treated with salvage radical prostatectomy (SRP) are poorly defined. To identify predictors of biochemical recurrence (BCR), metastasis, and death following SRP to help select patients who may benefit from SRP. This is a retrospective, international, multi-institutional cohort analysis. There was a median follow-up of 4.4 yr following SRP performed on 404 men with radiation-recurrent PCa from 1985 to 2009 in tertiary centers. Open SRP. BCR after SRP was defined as a serum prostate-specific antigen (PSA) ≥ 0.1 or ≥ 0.2 ng/ml (depending on the institution). Secondary end points included progression to metastasis and cancer-specific death. Median age at SRP was 65 yr of age, and median pre-SRP PSA was 4.5 ng/ml. Following SRP, 195 patients experienced BCR, 64 developed metastases, and 40 died from PCa. At 10 yr after SRP, BCR-free survival, metastasis-free survival, and cancer-specific survival (CSS) probabilities were 37% (95% confidence interval [CI], 31-43), 77% (95% CI, 71-82), and 83% (95% CI, 76-88), respectively. On preoperative multivariable analysis, pre-SRP PSA and Gleason score at postradiation prostate biopsy predicted BCR (p = 0.022; global p 75% of patients 10 yr after surgery. Patients with lower pre-SRP PSA levels and lower postradiation prostate biopsy Gleason score have the highest probability of cure from SRP. Copyright © 2011 European Association of Urology. Published by Elsevier B.V. All rights reserved.

Indirect synthesis of multi-degree of freedom transient systems. [linear programming for a kinematically linear system

Science.gov (United States)

Pilkey, W. D.; Chen, Y. H.

1974-01-01

An indirect synthesis method is used in the efficient optimal design of multi-degree of freedom, multi-design element, nonlinear, transient systems. A limiting performance analysis which requires linear programming for a kinematically linear system is presented. The system is selected using system identification methods such that the designed system responds as closely as possible to the limiting performance. The efficiency is a result of the method avoiding the repetitive systems analyses accompanying other numerical optimization methods.

From fault classification to fault tolerance for multi-agent systems

CERN Document Server

Potiron, Katia; Taillibert, Patrick

2013-01-01

Faults are a concern for Multi-Agent Systems (MAS) designers, especially if the MAS are built for industrial or military use because there must be some guarantee of dependability. Some fault classification exists for classical systems, and is used to define faults. When dependability is at stake, such fault classification may be used from the beginning of the system's conception to define fault classes and specify which types of faults are expected. Thus, one may want to use fault classification for MAS; however, From Fault Classification to Fault Tolerance for Multi-Agent Systems argues that

MULTI-PERSON DECISION FOR SUSTAINABLE DESIGN ON IBS FLOOR SYSTEM SELECTION

Directory of Open Access Journals (Sweden)

Christiono Utomo

2013-05-01

Full Text Available Selecting a design solution (choice problem is one of the natures of design decision. If the problem is more complex and involves multi participants, decision aid is necessary. This paper discusses the nature of group judgment and negotiation on multi-criteria decision-making methodologies. It presents a conceptual model of negotiation support in a multi-person decision on building floor system selection. Decision technique (AHP was applied for decision process in a satisfying options and game theory for coalition formation. An n-person cooperative game is represented by a set of all players. The proposed coalition formation model enables each agent to select individually or coalition. It improves the value of building system decision. It further emphasizes the importance of performance evaluation in the design process and value-based decision. The support model can be extended to an automated negotiation and in different building system selection with proper  modification. Keywords: Multi-person, design decision, IBS, floor system selection.

Thermodynamic analysis of a solar-based multi-generation system with hydrogen production

International Nuclear Information System (INIS)

Ozturk, Murat; Dincer, Ibrahim

2013-01-01

Thermodynamic analysis of a renewable-based multi-generation energy production system which produces a number of outputs, such as power, heating, cooling, hot water, hydrogen and oxygen is conducted. This solar-based multi-generation system consists of four main sub-systems: Rankine cycle, organic Rankine cycle, absorption cooling and heating, and hydrogen production and utilization. Exergy destruction ratios and rates, power or heat transfer rates, energy and exergy efficiencies of the system components are carried out. Some parametric studies are performed in order to examine the effects of varying operating conditions (e.g., reference temperature, direct solar radiation and receiver temperature) on the exergy efficiencies of the sub-systems as well as the whole system. The solar-based multi-generation system which has an exergy efficiency of 57.35%, is obtained to be higher than using these sub-systems separately. The evaluation of the exergy efficiency and exergy destruction for the sub-systems and the overall system show that the parabolic dish collectors have the highest exergy destruction rate among constituent parts of the solar-based multi-generation system, due to high temperature difference between the working fluid and collector receivers. -- Highlights: ► Development of a new multi-generation system for solar-based hydrogen production. ► Investigation of exergy efficiencies and destructions in each process of the system. ► Evaluation of varying operating conditions on the exergy destruction and efficiency

Multi-dimensional database design and implementation of dam safety monitoring system

Directory of Open Access Journals (Sweden)

Zhao Erfeng

2008-09-01

Full Text Available To improve the effectiveness of dam safety monitoring database systems, the development process of a multi-dimensional conceptual data model was analyzed and a logic design was achieved in multi-dimensional database mode. The optimal data model was confirmed by identifying data objects, defining relations and reviewing entities. The conversion of relations among entities to external keys and entities and physical attributes to tables and fields was interpreted completely. On this basis, a multi-dimensional database that reflects the management and analysis of a dam safety monitoring system on monitoring data information has been established, for which factual tables and dimensional tables have been designed. Finally, based on service design and user interface design, the dam safety monitoring system has been developed with Delphi as the development tool. This development project shows that the multi-dimensional database can simplify the development process and minimize hidden dangers in the database structure design. It is superior to other dam safety monitoring system development models and can provide a new research direction for system developers.

Changing ‘Multi-Problem Families’ – Developing a Multi-Contextual Systemic Approach

Directory of Open Access Journals (Sweden)

2007-05-01

Full Text Available Over the past 30 years the Marlborough Family Service in London has pioneered multi-family work with marginalized families presenting simultaneously with abuse and neglect, family violence, substance misuse, educational failure and mental illness. The approach is based on a systemic multi-contextual mode and this chapter describes the evolving work, including the establishment of the first permanent multiple family day setting, specifically designed for and solely dedicated to the work with seemingly ‘hopeless’ families. The ingredients of ‘therapeutic assessments’ of parents and families are outlined and the importance of initial network meetings with professionals and family members is emphasized.

Autonomous Formations of Multi-Agent Systems

Science.gov (United States)

Dhali, Sanjana; Joshi, Suresh M.

2013-01-01

Autonomous formation control of multi-agent dynamic systems has a number of applications that include ground-based and aerial robots and satellite formations. For air vehicles, formation flight ("flocking") has the potential to significantly increase airspace utilization as well as fuel efficiency. This presentation addresses two main problems in multi-agent formations: optimal role assignment to minimize the total cost (e.g., combined distance traveled by all agents); and maintaining formation geometry during flock motion. The Kuhn-Munkres ("Hungarian") algorithm is used for optimal assignment, and consensus-based leader-follower type control architecture is used to maintain formation shape despite the leader s independent movements. The methods are demonstrated by animated simulations.

Explicit/multi-parametric model predictive control (MPC) of linear discrete-time systems by dynamic and multi-parametric programming

KAUST Repository

Kouramas, K.I.; Faí sca, N.P.; Panos, C.; Pistikopoulos, E.N.

2011-01-01

This work presents a new algorithm for solving the explicit/multi- parametric model predictive control (or mp-MPC) problem for linear, time-invariant discrete-time systems, based on dynamic programming and multi-parametric programming techniques

Cooperative Path-Planning for Multi-Vehicle Systems

Directory of Open Access Journals (Sweden)

Qichen Wang

2014-11-01

Full Text Available In this paper, we propose a collision avoidance algorithm for multi-vehicle systems, which is a common problem in many areas, including navigation and robotics. In dynamic environments, vehicles may become involved in potential collisions with each other, particularly when the vehicle density is high and the direction of travel is unrestricted. Cooperatively planning vehicle movement can effectively reduce and fairly distribute the detour inconvenience before subsequently returning vehicles to their intended paths. We present a novel method of cooperative path planning for multi-vehicle systems based on reinforcement learning to address this problem as a decision process. A dynamic system is described as a multi-dimensional space formed by vectors as states to represent all participating vehicles’ position and orientation, whilst considering the kinematic constraints of the vehicles. Actions are defined for the system to transit from one state to another. In order to select appropriate actions whilst satisfying the constraints of path smoothness, constant speed and complying with a minimum distance between vehicles, an approximate value function is iteratively developed to indicate the desirability of every state-action pair from the continuous state space and action space. The proposed scheme comprises two phases. The convergence of the value function takes place in the former learning phase, and it is then used as a path planning guideline in the subsequent action phase. This paper summarizes the concept and methodologies used to implement this online cooperative collision avoidance algorithm and presents results and analysis regarding how this cooperative scheme improves upon two baseline schemes where vehicles make movement decisions independently.

Status of the new multi-frequency ECRH system for ASDEX Upgrade

DEFF Research Database (Denmark)

Wagner, D.; Grünwald, G.; Leuterer, F.

2008-01-01

Currently, a new multi-frequency ECRH system is under construction at the ASDEX Upgrade tokamak experiment. This system employs, for the first time in a fusion device, multi-frequency gyrotrons, step-tunable in the range 105-140 GHz. The first two gyrotrons, working at 105 and 140 GHz, were...

Investigating the adaptability of the multi-pump multi-piston power take-off system for a novel wave energy converter

NARCIS (Netherlands)

Wei, Y.; Barradas Berglind, J.J; van Rooij, M.; Prins, WA; Jayawardhana, B.; Vakis, A. I.

2017-01-01

In this work, a numerical model is developed in order to investigate the adaptability of the multi-pump multi-piston power take-off ((MPPTO)-P-2) system of a novel wave energy converter (WEC). This model is realized in the MATLAB/SIMULINK environment, using the multi-body dynamics solver Multibody

Multi-Kepler GPU vs. multi-Intel MIC for spin systems simulations

Science.gov (United States)

Bernaschi, M.; Bisson, M.; Salvadore, F.

2014-10-01

We present and compare the performances of two many-core architectures: the Nvidia Kepler and the Intel MIC both in a single system and in cluster configuration for the simulation of spin systems. As a benchmark we consider the time required to update a single spin of the 3D Heisenberg spin glass model by using the Over-relaxation algorithm. We present data also for a traditional high-end multi-core architecture: the Intel Sandy Bridge. The results show that although on the two Intel architectures it is possible to use basically the same code, the performances of a Intel MIC change dramatically depending on (apparently) minor details. Another issue is that to obtain a reasonable scalability with the Intel Phi coprocessor (Phi is the coprocessor that implements the MIC architecture) in a cluster configuration it is necessary to use the so-called offload mode which reduces the performances of the single system. As to the GPU, the Kepler architecture offers a clear advantage with respect to the previous Fermi architecture maintaining exactly the same source code. Scalability of the multi-GPU implementation remains very good by using the CPU as a communication co-processor of the GPU. All source codes are provided for inspection and for double-checking the results.

Optimized production planning model for a multi-plant cultivation system under uncertainty

Science.gov (United States)

Ke, Shunkui; Guo, Doudou; Niu, Qingliang; Huang, Danfeng

2015-02-01

An inexact multi-constraint programming model under uncertainty was developed by incorporating a production plan algorithm into the crop production optimization framework under the multi-plant collaborative cultivation system. In the production plan, orders from the customers are assigned to a suitable plant under the constraints of plant capabilities and uncertainty parameters to maximize profit and achieve customer satisfaction. The developed model and solution method were applied to a case study of a multi-plant collaborative cultivation system to verify its applicability. As determined in the case analysis involving different orders from customers, the period of plant production planning and the interval between orders can significantly affect system benefits. Through the analysis of uncertain parameters, reliable and practical decisions can be generated using the suggested model of a multi-plant collaborative cultivation system.

Institutional Profiles: Some Strategic Tools

Directory of Open Access Journals (Sweden)

Frans van Vught

2014-04-01

Full Text Available In this paper we argue that both internal and external pressures and conditions urge contemporary higher education institutions to carefully think through their institutional profiles positions in domestic and global higher education contexts. We subsequently analyse strategic positioning from the strategic management literature and offer four tools — mapping, multi-dimensional ranking, benchmarking and degree profiling — to assist higher education institutions in their profiling and positioning strategies.

Resonant Quasi-Optical Systems with Multi-Row Periodic Structures

DEFF Research Database (Denmark)

Oleksandr, Rybalko; Rybalko, Yu A.; Buriak, I. A.

2017-01-01

Selective properties of resonant quasi-optical systems with periodical multi-row structures in millimeter wavelength range are described. The possibility of selection fluctuations in the volume of open resonator using double-row periodic elements was shown in the experiment at 70-80 GHz. Advantages...... and possibility of control the energy characteristics of such structures are also described. The obtained experimental data is used to confirm the results of computational analysis previously described in the literature. Implementation of resonant quasi-optical systems with multi-row periodic structures...

Effect of One-Step and Multi-Steps Polishing System on Enamel Roughness

Directory of Open Access Journals (Sweden)

Cynthia Sumali

2013-07-01

Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 The final procedures of orthodontic treatment are bracket debonding and cleaning the remaining adhesive. Multi-step polishing system is the most common method used. The disadvantage of that system is long working time, because of the stages that should be done. Therefore, dental material manufacturer make an improvement to the system, to reduce several stages into one stage only. This new system is known as one-step polishing system. Objective: To compare the effect of one-step and multi-step polishing system on enamel roughness after orthodontic bracket debonding. Methods: Randomized control trial was conducted included twenty-eight maxillary premolar randomized into two polishing system; one-step OptraPol (Ivoclar, Vivadent and multi-step AstroPol (Ivoclar, Vivadent. After bracket debonding, the remaining adhesive on each group was cleaned by subjective polishing system for ninety seconds using low speed handpiece. The enamel roughness was subjected to profilometer, registering two roughness parameters (Ra, Rz. Independent t-test was used to analyze the mean score of enamel roughness in each group. Results: There was no significant difference of enamel roughness between one-step and multi-step polishing system (p>0.005. Conclusion: One-step polishing system can produce a similar enamel roughness to multi-step polishing system after bracket debonding and adhesive cleaning.DOI: 10.14693/jdi.v19i3.136

Impact of the Patient-Reported Outcomes Management Information System (PROMIS) upon the design and operation of multi-center clinical trials: a qualitative research study.

Science.gov (United States)

Eisenstein, Eric L; Diener, Lawrence W; Nahm, Meredith; Weinfurt, Kevin P

2011-12-01

New technologies may be required to integrate the National Institutes of Health's Patient Reported Outcome Management Information System (PROMIS) into multi-center clinical trials. To better understand this need, we identified likely PROMIS reporting formats, developed a multi-center clinical trial process model, and identified gaps between current capabilities and those necessary for PROMIS. These results were evaluated by key trial constituencies. Issues reported by principal investigators fell into two categories: acceptance by key regulators and the scientific community, and usability for researchers and clinicians. Issues reported by the coordinating center, participating sites, and study subjects were those faced when integrating new technologies into existing clinical trial systems. We then defined elements of a PROMIS Tool Kit required for integrating PROMIS into a multi-center clinical trial environment. The requirements identified in this study serve as a framework for future investigators in the design, development, implementation, and operation of PROMIS Tool Kit technologies.

Annual report of the Institute of Physical and Chemical Research, for fiscal 1999

International Nuclear Information System (INIS)

2000-01-01

The research activities in the Institute of Physical and Chemical Research (RIKEN) for the fiscal year 1999 were briefly described in this report. In addition, the research papers published in the year from the laboratories in RIKEN Wako Main Campus, RIKEN Tsukuba Research Center of Life Science and RIKEN Harima Institute were presented. Moreover, ten special research projects for basic science are now progressing on the following themes: photosynthetic science (artificial photosynthesis and the mechanism of photosynthesis), biodesign research (cellular function system, membranous function system), coherent science research (coherent control for free electron, quantum processing, structural control and coherent molecular interaction), research on multi-bioprobes (development of multi-functional bioactive compounds), research on essential reaction (stereo-control and energy control), atomic-scale sciengineering (phase 2 study), MR science research (phase 2 study), slow quantum beam production of ultra slow highly charged ions and ecomolecular science research (material conversion and biological/chemical conversion for environmental compounds). The research activities of RIKEN Brain Science Institute were also outlined and RIKEN Genomic Sciences Center were also outlined. In the year, RIKEN symposium was held 38 times by various laboratories. Here, the themes of these symposia were listed as well as those of international symposia sponsored by RIKEN Institute. (M.N.)

Numerical modelling of multi-vane expander operating conditions in ORC system

Science.gov (United States)

Rak, Józef; Błasiak, Przemysław; Kolasiński, Piotr

2017-11-01

Multi-vane expanders are positive displacement volumetric machines which are nowadays considered for application in micro-power domestic ORC systems as promising alternative to micro turbines and other volumetric expanders. The multi-vane expander features very simple design, low gas flow capacity, low expansion ratios, an advantageous ratio of the power output to the external dimensions and are insensitive to the negative influence of the gas-liquid mixture expansion. Moreover, the multi-vane expander can be easily hermetically sealed, which is one of the key issues in the ORC system design. A literature review indicates that issues concerning the application of multi-vane expanders in such systems, especially related to operating of multi-vane expander with different low-boiling working fluids, are innovative, not fully scientifically described and have the potential for practical implementation. In this paper the results of numerical investigations on multi-vane expander operating conditions are presented. The analyses were performed on three-dimensional numerical model of the expander in ANSYS CFX software. The numerical model of the expander was validated using the data obtained from the experiment carried out on a lab test-stand. Then a series of computational analysis were performed using expanders' numerical model in order to determine its operating conditions under various flow conditions of different working fluids.

A survey of Tumult, a real-time multi-processor system

International Nuclear Information System (INIS)

Jansen, P.G.

1986-01-01

Tumult (Twente University MULTi processor system) is the name of an ongoing project aiming at the design and implementation of a modular extendible multiprocessor system. All memory is distributed and processors communicate in parallel via a fast and reliable local switching network instead of a shared bus. A distributed real-time operating system is being designed and implemented, consisting of a multi-tasking subsystem per processor. Processes can communicate via a message passing mechanism. Communication links and processes are dynamically created and disposed by the application. In this article a brief description of the system is given; communication aspects are emphasized. (Auth.)

Distributed model based control of multi unit evaporation systems

International Nuclear Information System (INIS)

Yudi Samyudia

2006-01-01

In this paper, we present a new approach to the analysis and design of distributed control systems for multi-unit plants. The approach is established after treating the effect of recycled dynamics as a gap metric uncertainty from which a distributed controller can be designed sequentially for each unit to tackle the uncertainty. We then use a single effect multi-unit evaporation system to illustrate how the proposed method is used to analyze different control strategies and to systematically achieve a better closed-loop performance using a distributed model-based controller

Multi-sensor measurement system for robotic drilling

OpenAIRE

Frommknecht, Andreas; Kühnle, Jens; Pidan, Sergej; Effenberger, Ira

2015-01-01

A multi-sensor measurement system for robotic drilling is presented. The system enables a robot to measure its 6D pose with respect to the work piece and to establish a reference coordinate system for drilling. The robot approaches the drill point and performs an orthogonal alignment with the work piece. Although the measurement systems are readily capable of achieving high position accuracy and low deviation to perpendicularity, experiments show that inaccuracies in the robot's 6D-pose and e...

Soft-information flipping approach in multi-head multi-track BPMR systems

Science.gov (United States)

Warisarn, C.; Busyatras, W.; Myint, L. M. M.

2018-05-01

Inter-track interference is one of the most severe impairments in bit-patterned media recording system. This impairment can be effectively handled by a modulation code and a multi-head array jointly processing multiple tracks; however, such a modulation constraint has never been utilized to improve the soft-information. Therefore, this paper proposes the utilization of modulation codes with an encoded constraint defined by the criteria for soft-information flipping during a three-track data detection process. Moreover, we also investigate the optimal offset position of readheads to provide the most improvement in system performance. The simulation results indicate that the proposed systems with and without position jitter are significantly superior to uncoded systems.

Model of interaction in Smart Grid on the basis of multi-agent system

Science.gov (United States)

Engel, E. A.; Kovalev, I. V.; Engel, N. E.

2016-11-01

This paper presents model of interaction in Smart Grid on the basis of multi-agent system. The use of travelling waves in the multi-agent system describes the behavior of the Smart Grid from the local point, which is being the complement of the conventional approach. The simulation results show that the absorption of the wave in the distributed multi-agent systems is effectively simulated the interaction in Smart Grid.

Organization of the secure distributed computing based on multi-agent system

Science.gov (United States)

Khovanskov, Sergey; Rumyantsev, Konstantin; Khovanskova, Vera

2018-04-01

Nowadays developing methods for distributed computing is received much attention. One of the methods of distributed computing is using of multi-agent systems. The organization of distributed computing based on the conventional network computers can experience security threats performed by computational processes. Authors have developed the unified agent algorithm of control system of computing network nodes operation. Network PCs is used as computing nodes. The proposed multi-agent control system for the implementation of distributed computing allows in a short time to organize using of the processing power of computers any existing network to solve large-task by creating a distributed computing. Agents based on a computer network can: configure a distributed computing system; to distribute the computational load among computers operated agents; perform optimization distributed computing system according to the computing power of computers on the network. The number of computers connected to the network can be increased by connecting computers to the new computer system, which leads to an increase in overall processing power. Adding multi-agent system in the central agent increases the security of distributed computing. This organization of the distributed computing system reduces the problem solving time and increase fault tolerance (vitality) of computing processes in a changing computing environment (dynamic change of the number of computers on the network). Developed a multi-agent system detects cases of falsification of the results of a distributed system, which may lead to wrong decisions. In addition, the system checks and corrects wrong results.

Entanglement and nonlocality in multi-particle systems

Science.gov (United States)

Reid, Margaret D.; He, Qiong-Yi; Drummond, Peter D.

2012-02-01

Entanglement, the Einstein-Podolsky-Rosen (EPR) paradox and Bell's failure of local-hiddenvariable (LHV) theories are three historically famous forms of "quantum nonlocality". We give experimental criteria for these three forms of nonlocality in multi-particle systems, with the aim of better understanding the transition from microscopic to macroscopic nonlocality. We examine the nonlocality of N separated spin J systems. First, we obtain multipartite Bell inequalities that address the correlation between spin values measured at each site, and then we review spin squeezing inequalities that address the degree of reduction in the variance of collective spins. The latter have been particularly useful as a tool for investigating entanglement in Bose-Einstein condensates (BEC). We present solutions for two topical quantum states: multi-qubit Greenberger-Horne-Zeilinger (GHZ) states, and the ground state of a two-well BEC.

A Multi-Agent Traffic Control Model Based on Distributed System

Directory of Open Access Journals (Sweden)

Qian WU

2014-06-01

Full Text Available With the development of urbanization construction, urban travel has become a quite thorny and imminent problem. Some previous researches on the large urban traffic systems easily change into NPC problems. We purpose a multi-agent inductive control model based on the distributed approach. To describe the real traffic scene, this model designs four different types of intelligent agents, i.e. we regard each lane, route, intersection and traffic region as different types of intelligent agents. Each agent can achieve the real-time traffic data from its neighbor agents, and decision-making agents establish real-time traffic signal plans through the communication between local agents and their neighbor agents. To evaluate the traffic system, this paper takes the average delay, the stopped time and the average speed as performance parameters. Finally, the distributed multi-agent is simulated on the VISSIM simulation platform, the simulation results show that the multi-agent system is more effective than the adaptive control system in solving the traffic congestion.

A dynamic predictive maintenance policy for complex multi-component systems

International Nuclear Information System (INIS)

Van Horenbeek, Adriaan; Pintelon, Liliane

2013-01-01

The use of prognostic methods in maintenance in order to predict remaining useful life is receiving more attention over the past years. The use of these techniques in maintenance decision making and optimization in multi-component systems is however a still underexplored area. The objective of this paper is to optimally plan maintenance for a multi-component system based on prognostic/predictive information while considering different component dependencies (i.e. economic, structural and stochastic dependence). Consequently, this paper presents a dynamic predictive maintenance policy for multi-component systems that minimizes the long-term mean maintenance cost per unit time. The proposed maintenance policy is a dynamic method as the maintenance schedule is updated when new information on the degradation and remaining useful life of components becomes available. The performance, regarding the objective of minimal long-term mean cost per unit time, of the developed dynamic predictive maintenance policy is compared to five other conventional maintenance policies, these are: block-based maintenance, age-based maintenance, age-based maintenance with grouping, inspection condition-based maintenance and continuous condition-based maintenance. The ability of the predictive maintenance policy to react to changing component deterioration and dependencies within a multi-component system is quantified and the results show significant cost savings

Study on collaborative optimization control of ventilation and radon reduction system based on multi-agent technology

International Nuclear Information System (INIS)

Dai Jianyong; Meng Lingcong; Zou Shuliang

2015-01-01

According to the radioactive safety features such as radon and its progeny, combined with the theory of ventilation system, structure of multi-agent system for ventilation and radon reduction system is constructed with the application of multi agent technology. The function attribute of the key agent and the connection between the nodes in the multi-agent system are analyzed to establish the distributed autonomous logic structure and negotiation mechanism of multi agent system of ventilation and radon reduction system, and thus to implement the coordination optimization control of the multi-agent system. The example analysis shows that the system structure of the multi-agent system of ventilation and reducing radon system and its collaborative mechanism can improve and optimize the radioactive pollutants control, which provides a theoretical basis and important application prospect. (authors)

Provincial Coordination and Inter-Institutional Collaboration in British Columbia's College, University College and Institute System. Monograph Series.

Science.gov (United States)

Gaber, Devron

This document addresses a study that aimed to better understand the historical development of British Columbia community college, university college, and institute system with special attention given to recent changes in inter-institutional collaboration in relation to provincial coordination. The study also addresses centralization and…

Modeling of the Institutional System of Enterpreneurship Promotion: the Case of Lithuania

Directory of Open Access Journals (Sweden)

Gediminas Pauliukevicius

2013-09-01

Full Text Available The purpose of the article is to review the institutional system of entrepreneurship promotion that exists in Lithuania and to offer guidelines to improve it. The research results show that the unified institutional system of entrepreneurship promotion in Lithuania does not present: responsible institutions coordinate single measures and their implementation, but do not follow long-term general strategy. According to research findings, in order to improve the entrepreneurship promotion system of Lithuania there is a need to create the main institutional system out of responsable ministries (the Ministry of Education and Science, the Ministry of Economy, the Ministry of Agriculture, the Ministry of Social Security and Labour and define the boundaries of their responsibilities.

Second-Order Controllability of Multi-Agent Systems with Multiple Leaders

International Nuclear Information System (INIS)

Liu Bo; Han Xiao; Shi Yun-Tao; Su Hou-Sheng

2016-01-01

This paper proposes a new second-order continuous-time multi-agent model and analyzes the controllability of second-order multi-agent system with multiple leaders based on the asymmetric topology. This paper considers the more general case: velocity coupling topology is different from location coupling topology. Some sufficient and necessary conditions are presented for the controllability of the system with multiple leaders. In addition, the paper studies the controllability of the system with velocity damping gain. Simulation results are given to illustrate the correctness of theoretical results. (paper)

Opportunities of creating multi-agent systems in the service sector

Directory of Open Access Journals (Sweden)

Shatsky A.A.

2017-03-01

Full Text Available the paper seeks to examine opportunities to create multi-agent systems (MAS in the service sector. Using methods of theoretical analysis and synthesis, the author attempts to apply a multi-agent technology to description of the socio-economic system, such as the service sector. As a result, the author identifies three types of MAS in the service sector based on different types of architecture of intelligent information systems. The research shows that the problem posed by the author requires further study and clarification of results

A fuzzy multi-criteria decision-making model for trigeneration system

International Nuclear Information System (INIS)

Wang Jiangjiang; Jing Youyin; Zhang Chunfa; Shi Guohua; Zhang Xutao

2008-01-01

The decision making for trigeneration systems is a compositive project and it should be evaluated and compared in a multi-criteria analysis method. This paper presents a fuzzy multi-criteria decision-making model (FMCDM) for trigeneration systems selection and evaluation. The multi-criteria decision-making methods are briefly reviewed combining the general decision-making process. Then the fuzzy set theory, weighting method and the FMCDM model are presented. Finally, several kinds of trigeneration systems, whose dynamical sources are, respectively stirling engine, gas turbine, gas engine and solid oxide fuel cell, are compared and evaluated with a separate generation system. The case for selecting the optimal trigeneration system applied to a residential building is assessed from the technical, economical, environmental and social aspects, and the FMCDM model combining analytic hierarchical process is applied to the trigeneration case to demonstrate the decision-making process and effectiveness of proposed model. The results show that the gas engine plus lithium bromide absorption water heater/chiller unit for the residential building is the best scheme in the five options

Heterogeneous Multi-Robot System for Mapping Environmental Variables of Greenhouses.

Science.gov (United States)

Roldán, Juan Jesús; Garcia-Aunon, Pablo; Garzón, Mario; de León, Jorge; Del Cerro, Jaime; Barrientos, Antonio

2016-07-01

The productivity of greenhouses highly depends on the environmental conditions of crops, such as temperature and humidity. The control and monitoring might need large sensor networks, and as a consequence, mobile sensory systems might be a more suitable solution. This paper describes the application of a heterogeneous robot team to monitor environmental variables of greenhouses. The multi-robot system includes both ground and aerial vehicles, looking to provide flexibility and improve performance. The multi-robot sensory system measures the temperature, humidity, luminosity and carbon dioxide concentration in the ground and at different heights. Nevertheless, these measurements can be complemented with other ones (e.g., the concentration of various gases or images of crops) without a considerable effort. Additionally, this work addresses some relevant challenges of multi-robot sensory systems, such as the mission planning and task allocation, the guidance, navigation and control of robots in greenhouses and the coordination among ground and aerial vehicles. This work has an eminently practical approach, and therefore, the system has been extensively tested both in simulations and field experiments.

Heterogeneous Multi-Robot System for Mapping Environmental Variables of Greenhouses

Directory of Open Access Journals (Sweden)

Juan Jesús Roldán

2016-07-01

Full Text Available The productivity of greenhouses highly depends on the environmental conditions of crops, such as temperature and humidity. The control and monitoring might need large sensor networks, and as a consequence, mobile sensory systems might be a more suitable solution. This paper describes the application of a heterogeneous robot team to monitor environmental variables of greenhouses. The multi-robot system includes both ground and aerial vehicles, looking to provide flexibility and improve performance. The multi-robot sensory system measures the temperature, humidity, luminosity and carbon dioxide concentration in the ground and at different heights. Nevertheless, these measurements can be complemented with other ones (e.g., the concentration of various gases or images of crops without a considerable effort. Additionally, this work addresses some relevant challenges of multi-robot sensory systems, such as the mission planning and task allocation, the guidance, navigation and control of robots in greenhouses and the coordination among ground and aerial vehicles. This work has an eminently practical approach, and therefore, the system has been extensively tested both in simulations and field experiments.

A multi-channel high-resolution time recorder system

International Nuclear Information System (INIS)

Zhang Lingyun; Yang Xiaojun; Song Kezhu; Wang Yanfang

2004-01-01

This paper introduces a multi-channel and high-speed time recorder system, which was originally designed to work in the experiments of quantum cryptography research. The novelty of the system is that all the hardware logic is performed by only one FPGA. The system can achieve several desirable features, such as simplicity, high resolution and high processing speed. (authors)

Optimization of AVR Parameters of a Multi-machine Power System ...

African Journals Online (AJOL)

user1

Keywords: multi-machine power system stability, AVR system, power system stabilizer, PID controller ... The proposed controller was a fuzzy-logic-based stabilizer that has the capability to ..... Computer methods in power system analysis.

Modeling Multi-Mobile Agents System Based on Coalition Signature Mechanism Using UML

Institute of Scientific and Technical Information of China (English)

SUNZhixin; HUANGHaiping; WANGRuchuan

2004-01-01

With the development of electronic commerce and agent techniques, multi-mobile agents cooperation can not only improve the efficiency of electronic business trade, but more importantly, it has a comprehensive applicative value in solving the security issues of mobile agent system. This paper firstly describes the mechanism of multi-mobile agents coalition signature aiming at the system security. Subsequently it brings forward a basic architecture of Multi-mobile agents system (MMAS) based on the design pattern of multi-mobile agents. The paper uses the diagrs_rn of UML, such as use case diagram, class diagram and sequence diagram to build the detailed model of the coalition signature and multi-mobile agents cooperation results. Through security analysis, we find that multimobile agents cooperation and interaction can solve some security problems of mobile agents in transfer, and also it can improve the efficiency of business trade. These results indicate that MMAS has a high security performance and can be widely used in E-commerce trade.

A Multi-scale Modeling System with Unified Physics to Study Precipitation Processes

Science.gov (United States)

Tao, W. K.

2017-12-01

In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (1) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), and (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF). The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, a review of developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the precipitation, processes and their sensitivity on model resolution and microphysics schemes will be presented. Also how to use of the multi-satellite simulator to improve precipitation processes will be discussed.

Distributed Consensus of Stochastic Delayed Multi-agent Systems Under Asynchronous Switching.

Science.gov (United States)

Wu, Xiaotai; Tang, Yang; Cao, Jinde; Zhang, Wenbing

2016-08-01

In this paper, the distributed exponential consensus of stochastic delayed multi-agent systems with nonlinear dynamics is investigated under asynchronous switching. The asynchronous switching considered here is to account for the time of identifying the active modes of multi-agent systems. After receipt of confirmation of mode's switching, the matched controller can be applied, which means that the switching time of the matched controller in each node usually lags behind that of system switching. In order to handle the coexistence of switched signals and stochastic disturbances, a comparison principle of stochastic switched delayed systems is first proved. By means of this extended comparison principle, several easy to verified conditions for the existence of an asynchronously switched distributed controller are derived such that stochastic delayed multi-agent systems with asynchronous switching and nonlinear dynamics can achieve global exponential consensus. Two examples are given to illustrate the effectiveness of the proposed method.

NATO Advanced Research Institute on Health Services Systems

CERN Document Server

Werff, Albert; Hirsch, Gary; Barnard, Keith

1984-01-01

The Advanced Research Institute on "Health Services Systems" was held under the auspices of the NATO Special Programme Panel on Systems Science as a part of the NATO Science Committee's continuous effort to promote the advancement of science through international cooperation. A special word is said in this respect supra by Pro­ fessor Checkland, Chairman of the Systems Science Panel. The Advanced Research Institute (ARI) was organized for the purpose of bringing together senior scientists to seek a consensus on the assessment of the present state of knowledge on the specific topic of "health services systems" and to present views and recom­ mendations for future health services research directions, which should be of value to both the scientific community and the people in charge of reorienting health services. The conference was structured so as to permit the assembly of a variety of complementary viewpoints through intensive group discussions to be the basis of this final report. Invitees were selected fr...

Numerical modelling of multi-vane expander operating conditions in ORC system

Directory of Open Access Journals (Sweden)

Rak Józef

2017-01-01

Full Text Available Multi-vane expanders are positive displacement volumetric machines which are nowadays considered for application in micro-power domestic ORC systems as promising alternative to micro turbines and other volumetric expanders. The multi-vane expander features very simple design, low gas flow capacity, low expansion ratios, an advantageous ratio of the power output to the external dimensions and are insensitive to the negative influence of the gas-liquid mixture expansion. Moreover, the multi-vane expander can be easily hermetically sealed, which is one of the key issues in the ORC system design. A literature review indicates that issues concerning the application of multi-vane expanders in such systems, especially related to operating of multi-vane expander with different low-boiling working fluids, are innovative, not fully scientifically described and have the potential for practical implementation. In this paper the results of numerical investigations on multi-vane expander operating conditions are presented. The analyses were performed on three-dimensional numerical model of the expander in ANSYS CFX software. The numerical model of the expander was validated using the data obtained from the experiment carried out on a lab test-stand. Then a series of computational analysis were performed using expanders' numerical model in order to determine its operating conditions under various flow conditions of different working fluids.

Multi-channel temperature measurement system for automotive battery stack

Science.gov (United States)

Lewczuk, Radoslaw; Wojtkowski, Wojciech

2017-08-01

A multi-channel temperature measurement system for monitoring of automotive battery stack is presented in the paper. The presented system is a complete battery temperature measuring system for hybrid / electric vehicles that incorporates multi-channel temperature measurements with digital temperature sensors communicating through 1-Wire buses, individual 1-Wire bus for each sensor for parallel computing (parallel measurements instead of sequential), FPGA device which collects data from sensors and translates it for CAN bus frames. CAN bus is incorporated for communication with car Battery Management System and uses additional CAN bus controller which communicates with FPGA device through SPI bus. The described system can parallel measure up to 12 temperatures but can be easily extended in the future in case of additional needs. The structure of the system as well as particular devices are described in the paper. Selected results of experimental investigations which show proper operation of the system are presented as well.

A multi-function low solide angle system

International Nuclear Information System (INIS)

Yan Sujuan; Yao Linong

2001-01-01

A multi-function low solid angle system for direct and indirect measurement of radioactivity or emission rate of most α, β and EC emitting nuclides are described in this paper. The measurement result of 241 Am and 90 Sr- 90 Y are given

Implementation of a novel two-attractor grid multi-scroll chaotic system

International Nuclear Information System (INIS)

Xiao-Hua, Luo; Zheng-Wei, Tu; Xi-Rui, Liu; Chang, Cai; Pu, Gong; Yi-Long, Liang

2010-01-01

This paper proposed a method of generating two attractors in a novel grid multi-scroll chaotic system. Based on a newly generated three-dimensional system, a two-attractor grid multi-scroll attractor system can be generated by adding two triangular waves and a sign function. Some basic dynamical properties, such as equilibrium points, bifurcations, and phase diagrams, were studied. Furthermore, the system was experimentally confirmed by an electronic circuit. The circuit simulation results and numerical simulation results verified the feasibility of this method. (general)

A Novel Approach to Develop the Lower Order Model of Multi-Input Multi-Output System

Science.gov (United States)

Rajalakshmy, P.; Dharmalingam, S.; Jayakumar, J.

2017-10-01

A mathematical model is a virtual entity that uses mathematical language to describe the behavior of a system. Mathematical models are used particularly in the natural sciences and engineering disciplines like physics, biology, and electrical engineering as well as in the social sciences like economics, sociology and political science. Physicists, Engineers, Computer scientists, and Economists use mathematical models most extensively. With the advent of high performance processors and advanced mathematical computations, it is possible to develop high performing simulators for complicated Multi Input Multi Ouptut (MIMO) systems like Quadruple tank systems, Aircrafts, Boilers etc. This paper presents the development of the mathematical model of a 500 MW utility boiler which is a highly complex system. A synergistic combination of operational experience, system identification and lower order modeling philosophy has been effectively used to develop a simplified but accurate model of a circulation system of a utility boiler which is a MIMO system. The results obtained are found to be in good agreement with the physics of the process and with the results obtained through design procedure. The model obtained can be directly used for control system studies and to realize hardware simulators for boiler testing and operator training.

Multi-flux-tube system in the dual Ginzburg-Landau theory

International Nuclear Information System (INIS)

Ichie, H.; Suganuma, H.; Toki, H.

1996-01-01

We study the multi-flux-tube system in terms of the dual Ginzburg-Landau theory. We consider two periodic cases, where the directions of all the flux tubes are the same in one case and alternating in the other case for neighboring flux tubes. We formulate the multi-flux-tube system by regarding it as the system of two flux tubes penetrating through a two-dimensional spherical surface. We find the multi-flux-tube configuration becomes uniform above some critical flux-tube number density ρ c =1.3 endash 1.7 fm -2 . On the other hand, the inhomogeneity of the color electric distribution appears when the flux-tube density is smaller than ρ c . We study the inhomogeneity on the color electric distribution in relation with the flux-tube number density, and discuss the quark-gluon plasma formation process in ultrarelativistic heavy-ion collisions. copyright 1996 The American Physical Society

Consensus of second-order multi-agent dynamic systems with quantized data

Energy Technology Data Exchange (ETDEWEB)

Guan, Zhi-Hong, E-mail: zhguan@mail.hust.edu.cn [Department of Control Science and Engineering, Huazhong University of Science and Technology, Wuhan, 430074 (China); Meng, Cheng [Department of Control Science and Engineering, Huazhong University of Science and Technology, Wuhan, 430074 (China); Liao, Rui-Quan [Petroleum Engineering College,Yangtze University, Jingzhou, 420400 (China); Zhang, Ding-Xue, E-mail: zdx7773@163.com [Petroleum Engineering College,Yangtze University, Jingzhou, 420400 (China)

2012-01-09

The consensus problem of second-order multi-agent systems with quantized link is investigated in this Letter. Some conditions are derived for the quantized consensus of the second-order multi-agent systems by the stability theory. Moreover, a result characterizing the relationship between the eigenvalues of the Laplacians matrix and the quantized consensus is obtained. Examples are given to illustrate the theoretical analysis. -- Highlights: ► A second-order multi-agent model with quantized data is proposed. ► Two sufficient and necessary conditions are obtained. ► The relationship between the eigenvalues of the Laplacians matrix and the quantized consensus is discovered.

Power control method on VSC-HVDC in a hybrid multi-infeed HVDC system

DEFF Research Database (Denmark)

Liu, Yan; Chen, Zhe

2012-01-01

Multi-infeed HVDC (MIDC) system connected with VSC-HVDC links and LCC-HVDC links is a new structure in modern power systems, which can be called hybrid multi-infeed HVDC (HMIDC) system. The paper presents the voltage stability analysis of a HMIDC system modeled from a possible future Danish power...

Diversification at Financial Institutions and Systemic Crises

NARCIS (Netherlands)

Wagner, W.B.

2006-01-01

We show that the diversification of risks at financial institutions has unwelcome effects by increasing the likelihood of systems crises.As a result, complete diversification is not warranted adn the optimal degree of diversification is arbitrarily low.We also identify externalities that cause

Research of negotiation in network trade system based on multi-agent

Science.gov (United States)

Cai, Jun; Wang, Guozheng; Wu, Haiyan

2009-07-01

A construction and implementation technology of network trade based on multi-agent is described in this paper. First, we researched the technology of multi-agent, then we discussed the consumer's behaviors and the negotiation between purchaser and bargainer which emerges in the traditional business mode and analysed the key technology to implement the network trade system. Finally, we implement the system.

Stability of Multi-Planet Systems in the Alpha Centauri System

Science.gov (United States)

Lissauer, Jack J.

2017-01-01

We evaluate the extent of the regions within the alpha Centauri AB star system where small planets are able to orbit for billion-year timescales (Quarles & Lissauer 2016, Astron. J. 151, 111), as well as how closely-spaced planetary orbits can be within those regions in which individual planets can survive. Although individual planets on low inclination, low eccentricity, orbits can survive throughout the habitable zones of both stars, perturbations from the companion star imply that the spacing of planets in multi-planet systems within the habitable zones of each star must be significantly larger than the spacing of similar multi-planet systems orbiting single stars in order to be long-lived. Because the binary companion induces a forced eccentricity upon the orbits of planets in orbit around either star, appropriately-aligned circumstellar orbits with small initial eccentricities are stable to slightly larger initial semimajor axes than are initially circular orbits. Initial eccentricities close to forced eccentricities can have a much larger affect on how closely planetary orbits can be spaced, and therefore on how many planets may remain in the habitable zones, although the required spacing remains significantly higher than for planets orbiting single stars.

The maiden voyage of enterprise systems and micro foundational institutionalism

DEFF Research Database (Denmark)

Svejvig, Per

This short paper presents an in-progress research work aimed at establishing a theoretical lens for describing, understanding and explaining the period from going live with an enterprise system and until this system is stabilized and normal organizational performance is achieved - this period is ...... is metaphorically labeled the maiden voyage. The paper presents a short overview of institutional theory, and proposes methodologically guidelines for investigating the maiden voyage by institutional theory....

Network based multi-channel digital flash X-ray imaging system

International Nuclear Information System (INIS)

Wang Jingjin; Yuan Jie; Liu Yaqiang; Lin Yong; Song Zheng; Liu Keyin; Zhang Qi; Zheng Futang

2000-01-01

A network based multi-channel digital flash X-ray imaging system has been developed. It can be used to acquire and digitize orthogonal flash X-ray images in multi-interval, and to distribute the images on the network. There is no need of films and chemical process, no anxiety of waiting and no trouble of film archiving. This system is useful for testing ballistics, jet, explode, armour-piercing and fast running machines. The system composing and acquired images are presented. The software for object separating, mass calculating, 3D positioning, speed determining and cavity reconstruction are described

Network based multi-channel digital flash X-ray imaging system

International Nuclear Information System (INIS)

Wang Jingjin; Yuan Jie; Liu Yaqiang; Lin Yong; Song Zheng; Liu Keyin

2003-01-01

A network based multi-channel digital flash X-ray imaging system has been developed. It can be used to acquire and digitize orthogonal flash X-ray images in multi-interval, and to distribute the images on the network. There is no need of films and chemical process, no anxiety of waiting and no trouble of film archiving. This system is useful for testing ballistics, jet, explode, armour-piercing and fast running machines. The system composing and acquired images of terminal ballistics are presented. The software for object separating, profile calculating and 3D cavity reconstruction are described

Role of the multi-modality image archival and communication system in nuclear medicine

International Nuclear Information System (INIS)

Bela Kari; Adam Mester; Erno Mako; Zoltan Gyorfi; Bela Mihalik; Zsolt; Hegyi

2004-01-01

Various non-invasive imaging systems produce increasing amount of diagnostic images day by day in digital format. The direct consequence of this tendency places electronic archives and image transfers in spotlight. Moreover, the digital image archives may support any other activities like simultaneous displaying of multi-modality images, telediagnostics, on-line consultation, construction of standard databases for dedicated organs by regional and/or country wide (e.g. myocardial scintigraphy, mammography, etc....) in order to obtain much more exact diagnosis as well as to support education and training. Our institute started similar research and developing activities few years ago, resulting the construction of our PACS systems -MEDISA LINUX Debian and eRAD ImageMedical TM LINUX Red Hat- together with the telecommunication part. Mass storage unit of PACS is based on hard drives connecting in RAID with l.2Tbyte capacity. The on-line telecommunication system consists of an ISDN Multi-Media System (MMS) and Internet based independent units. MMS was dedicated mainly for on-line teleconferencing and consultation by the simultaneously transferred morphological and functional images obtaining from the central archives by DICOM or any other allowable image formats. MMS has been created as a part and requirements of an EU research project - RETRANSPLANT -. The central archives -PACS- can be accessed by DICOM 3.0 protocol on Internet surface through well maintained and secure access rights. Displaying and post-processing of any retrieved images on individual workstations are supported by eRAD ImageMedical TM PracticeBuilder1-2-3 (Window based) image manager with its unique supports and services. The 'real engine' of PracticeBuilder is Ver.5.0 or newer Internet Explorer. The unique feature of PracticelBuilder1-2-3 is the extremely fast patient and image access from the archives even from very 'far distance' (through continents), due to the exceptional image communication

Large Scale Document Inversion using a Multi-threaded Computing System.

Science.gov (United States)

Jung, Sungbo; Chang, Dar-Jen; Park, Juw Won

2017-06-01

Current microprocessor architecture is moving towards multi-core/multi-threaded systems. This trend has led to a surge of interest in using multi-threaded computing devices, such as the Graphics Processing Unit (GPU), for general purpose computing. We can utilize the GPU in computation as a massive parallel coprocessor because the GPU consists of multiple cores. The GPU is also an affordable, attractive, and user-programmable commodity. Nowadays a lot of information has been flooded into the digital domain around the world. Huge volume of data, such as digital libraries, social networking services, e-commerce product data, and reviews, etc., is produced or collected every moment with dramatic growth in size. Although the inverted index is a useful data structure that can be used for full text searches or document retrieval, a large number of documents will require a tremendous amount of time to create the index. The performance of document inversion can be improved by multi-thread or multi-core GPU. Our approach is to implement a linear-time, hash-based, single program multiple data (SPMD), document inversion algorithm on the NVIDIA GPU/CUDA programming platform utilizing the huge computational power of the GPU, to develop high performance solutions for document indexing. Our proposed parallel document inversion system shows 2-3 times faster performance than a sequential system on two different test datasets from PubMed abstract and e-commerce product reviews. •Information systems➝Information retrieval • Computing methodologies➝Massively parallel and high-performance simulations.

Multi-sensors multi-baseline mapping system for mobile robot using stereovision camera and laser-range device

Directory of Open Access Journals (Sweden)

Mohammed Faisal

2016-06-01

Full Text Available Countless applications today are using mobile robots, including autonomous navigation, security patrolling, housework, search-and-rescue operations, material handling, manufacturing, and automated transportation systems. Regardless of the application, a mobile robot must use a robust autonomous navigation system. Autonomous navigation remains one of the primary challenges in the mobile-robot industry; many control algorithms and techniques have been recently developed that aim to overcome this challenge. Among autonomous navigation methods, vision-based systems have been growing in recent years due to rapid gains in computational power and the reliability of visual sensors. The primary focus of research into vision-based navigation is to allow a mobile robot to navigate in an unstructured environment without collision. In recent years, several researchers have looked at methods for setting up autonomous mobile robots for navigational tasks. Among these methods, stereovision-based navigation is a promising approach for reliable and efficient navigation. In this article, we create and develop a novel mapping system for a robust autonomous navigation system. The main contribution of this article is the fuse of the multi-baseline stereovision (narrow and wide baselines and laser-range reading data to enhance the accuracy of the point cloud, to reduce the ambiguity of correspondence matching, and to extend the field of view of the proposed mapping system to 180°. Another contribution is the pruning the region of interest of the three-dimensional point clouds to reduce the computational burden involved in the stereo process. Therefore, we called the proposed system multi-sensors multi-baseline mapping system. The experimental results illustrate the robustness and accuracy of the proposed system.

Embedded memory design for multi-core and systems on chip

CERN Document Server

Mohammad, Baker

2014-01-01

This book describes the various tradeoffs systems designers face when designing embedded memory.  Readers designing multi-core systems and systems on chip will benefit from the discussion of different topics from memory architecture, array organization, circuit design techniques and design for test.  The presentation enables a multi-disciplinary approach to chip design, which bridges the gap between the architecture level and circuit level, in order to address yield, reliability and power-related issues for embedded memory.  ·         Provides a comprehensive overview of embedded memory design and associated challenges and choices; ·         Explains tradeoffs and dependencies across different disciplines involved with multi-core and system on chip memory design; ·         Includes detailed discussion of memory hierarchy and its impact on energy and performance; ·         Uses real product examples to demonstrate embedded memory design flow from architecture, to circuit ...

The research and application of multi-biometric acquisition embedded system

Science.gov (United States)

Deng, Shichao; Liu, Tiegen; Guo, Jingjing; Li, Xiuyan

2009-11-01

The identification technology based on multi-biometric can greatly improve the applicability, reliability and antifalsification. This paper presents a multi-biometric system bases on embedded system, which includes: three capture daughter boards are applied to obtain different biometric: one each for fingerprint, iris and vein of the back of hand; FPGA (Field Programmable Gate Array) is designed as coprocessor, which uses to configure three daughter boards on request and provides data path between DSP (digital signal processor) and daughter boards; DSP is the master processor and its functions include: control the biometric information acquisition, extracts feature as required and responsible for compare the results with the local database or data server through network communication. The advantages of this system were it can acquire three different biometric in real time, extracts complexity feature flexibly in different biometrics' raw data according to different purposes and arithmetic and network interface on the core-board will be the solution of big data scale. Because this embedded system has high stability, reliability, flexibility and fit for different data scale, it can satisfy the demand of multi-biometric recognition.

Multi Agent System Based Wide Area Protection against Cascading Events

DEFF Research Database (Denmark)

Liu, Zhou; Chen, Zhe; Liu, Leo

2012-01-01

In this paper, a multi-agent system based wide area protection scheme is proposed in order to prevent long term voltage instability induced cascading events. The distributed relays and controllers work as a device agent which not only executes the normal function automatically but also can...... the effectiveness of proposed protection strategy. The simulation results indicate that the proposed multi agent control system can effectively coordinate the distributed relays and controllers to prevent the long term voltage instability induced cascading events....

Intermediate Frequency Digital Receiver Based on Multi-FPGA System

Directory of Open Access Journals (Sweden)

Chengchang Zhang

2016-01-01

Full Text Available Aiming at high-cost, large-size, and inflexibility problems of traditional analog intermediate frequency receiver in the aerospace telemetry, tracking, and command (TTC system, we have proposed a new intermediate frequency (IF digital receiver based on Multi-FPGA system in this paper. Digital beam forming (DBF is realized by coordinated rotation digital computer (CORDIC algorithm. An experimental prototype has been developed on a compact Multi-FPGA system with three FPGAs to receive 16 channels of IF digital signals. Our experimental results show that our proposed scheme is able to provide a great convenience for the design of IF digital receiver, which offers a valuable reference for real-time, low power, high density, and small size receiver design.

System and Method for Multi-Wavelength Optical Signal Detection

Science.gov (United States)

McGlone, Thomas D. (Inventor)

2017-01-01

The system and method for multi-wavelength optical signal detection enables the detection of optical signal levels significantly below those processed at the discrete circuit level by the use of mixed-signal processing methods implemented with integrated circuit technologies. The present invention is configured to detect and process small signals, which enables the reduction of the optical power required to stimulate detection networks, and lowers the required laser power to make specific measurements. The present invention provides an adaptation of active pixel networks combined with mixed-signal processing methods to provide an integer representation of the received signal as an output. The present invention also provides multi-wavelength laser detection circuits for use in various systems, such as a differential absorption light detection and ranging system.

Design of multi-channel analyzer's monitoring system based on embedded system

International Nuclear Information System (INIS)

Yang Tao; Wei Yixiang

2007-01-01

A new Multi-Channel Analyzer's Monitoring system based on ARM9 Embedded system is introduced in this paper. Some solutions to problem are also discussed during the procedure of design, installation and debugging on Linux system. The Monitoring system is developed by using MiniGUI and Linux software system API, with the functions of collecting, displaying and I/O data controlling 1024 channels datum. They are all realized in real time, with the merits of low cost, small size and portability. All these lay the foundation of developing homemade Digital and Portable nuclear spectrometers. (authors)

The influence of an activity awareness display on distributed multi-team systems

NARCIS (Netherlands)

Brons, L.; Greef, T. de; Kleij, R. van der

2010-01-01

Motivation - Both multi-team systems and awareness displays have been studied more often in the past years, but there hasn't been much focus on the combination of these two subjects. Apart from doing so, we are particularly interested in the difficulties encountered when multi-team systems are

Complications and Short-Term Explantation Rate Following Artificial Urinary Sphincter Implantation: Results from a Large Middle European Multi-Institutional Case Series.

Science.gov (United States)

Kretschmer, Alexander; Hüsch, Tanja; Thomsen, Frauke; Kronlachner, Dominik; Obaje, Alice; Anding, Ralf; Pottek, Tobias; Rose, Achim; Olianas, Roberto; Friedl, Alexander; Hübner, Wilhelm; Homberg, Roland; Pfitzenmaier, Jesco; Grein, Ulrich; Queissert, Fabian; Naumann, Carsten Maik; Schweiger, Josef; Wotzka, Carola; Nyarangi-Dix, Joanne N; Hofmann, Torben; Seiler, Roland; Haferkamp, Axel; Bauer, Ricarda M

2016-01-01

Background/Aims/Objectives: To analyze perioperative complication and short-term explantation rates after perineal or penoscrotal single-cuff and double-cuff artificial urinary sphincter (AUS) implantation in a large middle European multi-institutional patient cohort. 467 male patients with stress urinary incontinence underwent implantation of a perineal single-cuff (n = 152), penoscrotal single-cuff (n = 99), or perineal double-cuff (n = 216) AUS between 2010 and 2012. Postoperative complications and 6-month explantation rates were assessed. For statistical analysis, Fisher's exact test and Kruskal-Wallis rank sum test, and a multiple logistic regression model were used (p AUS, penoscrotal single-cuff implantation led to significantly increased short-term explantation rates (8.6% (perineal) vs. 19.2% (penoscrotal), p = 0.019). The postoperative infection rate was significantly higher after double-cuff compared to single-cuff implantation (6.0% (single-cuff) vs. 13.9% (double-cuff), p = 0.019). The short-term explantation rate after primary double-cuff placement was 6.5% (p = 0.543 vs. perineal single-cuff). In multivariate analysis, the penoscrotal approach (p = 0.004), intraoperative complications (p = 0.005), postoperative bleeding (p = 0.011), and perioperative infection (p < 0.001) were independent risk factors for short-term explantation. Providing data from a large contemporary multi-institutional patient cohort from high-volume and low-volume institutions, our results reflect the current standard of care in middle Europe. We indicate that the penoscrotal approach is an independent risk factor for increased short-term explantation rates. © 2016 S. Karger AG, Basel.

Quality assurance in clinical trials : a multi-disciplinary approach

International Nuclear Information System (INIS)

Cornes, D.

2001-01-01

Full text: Multi-disciplinary groups, such as medical physicists and radiation therapists, which work effectively together, can ensure continued improvements in radiation therapy quality. The same is also true for clinical trials, which have the added complication of requiring multi-institutional participation to collate sufficient data to effectively assess treatment benefits. It can be difficult to manage quality across all aspects of a multi-disciplinary and multi-institutional trial. A planned system of quality assurance is necessary to provide support for participating centres and facilitate a collaborative approach. To ensure protocol compliance a good relationship between the clinical trial group and treatment centre is idea with definition of mutual goals and objectives before and during the trial, and ongoing consultation and feedback throughout the trial process. To ensure good quality data and maximise the validity of results the study protocol must be strictly adhered to. Because of the need for meticulous attention to detail, both in treatment delivery and standards of documentation, clinical trials are often seen to further complicate the process of delivery of radiation therapy treatment. The Declaration of Helsinki and Good Clinical Practise Guidelines (adopted in May 1996, ICH) provide 'international ethical and scientific standards for designing, conducting, recording and reporting clinical research' and multi-disciplinary groups in each participating centre should also adhere to these guidelines. Copyright (2001) Australasian College of Physical Scientists and Engineers in Medicine

Development of planar CT system for multi-layer PCB inspection

Energy Technology Data Exchange (ETDEWEB)

Kim, Seung Ho; Youn, Hanbean; Kam, Soohwa; Park, Eunpyeong; Kim, Ho Kyung [Pusan National University, Busan (Korea, Republic of)

2015-05-15

X-ray defect inspection apparatus can be used in the production line to inspect the PCB. However, a simple X-ray radiography cannot discriminate defects from the multi-layer PCBs because the layers of them overlays the defects. To complement this issue, computed tomography (CT) technology is applied to the NDT system which can offer 3-dimensional information of object. However, CT requires hundreds of projection images to examine a single PCB, hence real-time inspection is nearly impossible. In this study, we develop a planar computed tomography (pCT) system appropriate for the multi-layer PCB inspection. For the image reconstruction of planar cross-section images, we use the digital tomosynthesis (DTS) concept in association with the limited angle scanning. and performance characterization of the pCT system for the PCB inspection. The 3-d Fourier characteristics and more quantitative performance, such as contrast, uniformity, depth resolution will be presented. The cross-sectional images of multi-layer PCBs will also be demonstrated.

Multi-class oscillating systems of interacting neurons

DEFF Research Database (Denmark)

Ditlevsen, Susanne; Löcherbach, Eva

2017-01-01

We consider multi-class systems of interacting nonlinear Hawkes processes modeling several large families of neurons and study their mean field limits. As the total number of neurons goes to infinity we prove that the evolution within each class can be described by a nonlinear limit differential...

Supply rationing in multi-echelon divergent systems

NARCIS (Netherlands)

van der Heijden, Matthijs C.

1997-01-01

In this paper we determine a simple inventory control rule for multi-echelon distribution systems under periodic review without lot sizing. The primary focus is the two-echelon model with a stockless central depot, but several extensions (> 2 echelons, central stock allowed) are discussed as well.

Dynamic Multi-Rigid-Body Systems with Concurrent Distributed Contacts: Theory and Examples

International Nuclear Information System (INIS)

TRINKLE, JEFFREY C.; TZITZOURIS, J.A.; PANG, J.S.

2001-01-01

Consider a system of rigid bodies with multiple concurrent contacts. The multi-rigid-body contact problem is to predict the accelerations of the bodies and the normal friction loads acting at the contacts. This paper presents theoretical results for the multi-rigid-body contact problem under the assumptions that one or more contacts occur over locally planar, finite regions and that friction forces are consistent with the maximum work inequality. Existence and uniqueness results are presented for this problem under mild assumptions on the system inputs. In addition, the performance of two different time-stepping methods for integrating the dynamics are compared on two simple multi-body systems

Multi-Stage System for Automatic Target Recognition

Science.gov (United States)

Chao, Tien-Hsin; Lu, Thomas T.; Ye, David; Edens, Weston; Johnson, Oliver

2010-01-01

A multi-stage automated target recognition (ATR) system has been designed to perform computer vision tasks with adequate proficiency in mimicking human vision. The system is able to detect, identify, and track targets of interest. Potential regions of interest (ROIs) are first identified by the detection stage using an Optimum Trade-off Maximum Average Correlation Height (OT-MACH) filter combined with a wavelet transform. False positives are then eliminated by the verification stage using feature extraction methods in conjunction with neural networks. Feature extraction transforms the ROIs using filtering and binning algorithms to create feature vectors. A feedforward back-propagation neural network (NN) is then trained to classify each feature vector and to remove false positives. The system parameter optimizations process has been developed to adapt to various targets and datasets. The objective was to design an efficient computer vision system that can learn to detect multiple targets in large images with unknown backgrounds. Because the target size is small relative to the image size in this problem, there are many regions of the image that could potentially contain the target. A cursory analysis of every region can be computationally efficient, but may yield too many false positives. On the other hand, a detailed analysis of every region can yield better results, but may be computationally inefficient. The multi-stage ATR system was designed to achieve an optimal balance between accuracy and computational efficiency by incorporating both models. The detection stage first identifies potential ROIs where the target may be present by performing a fast Fourier domain OT-MACH filter-based correlation. Because threshold for this stage is chosen with the goal of detecting all true positives, a number of false positives are also detected as ROIs. The verification stage then transforms the regions of interest into feature space, and eliminates false positives using an

Integrated development environment for multi-core systems

Directory of Open Access Journals (Sweden)

Krunić Momčilo V.

2014-01-01

Full Text Available Development of the software application that provides comfortable working environment of embedded software applications was always a difficult task to achieve. To reach this goal it was necessary to integrate all specific tools designed for that purpose. This paper describes Integrated Development Environment (IDE that was developed to meet all specific needs of a software development for the family of multi-core target platforms designed for a digital signal processing in Cirrus Logic Company. Eclipse platform and RCP (Rich Client Platform was used as a basis, because it provides an extensible plug-in system for customizing the development environment. CLIDE (Cirrus Logic Integrated Development Environment represent the epilog of that effort, reliable IDE used for development of embedded applications. Validation of the solution is accomplished thru 2641 J Unit tests that validate most of the CLIDE's functionalities. Developed IDE (CLIDE significantly increases a quality of a software development for multi-core systems and reduces time-to-market, thereby justifying development costs.

Multi-agent system-based event-triggered hybrid control scheme for energy internet

DEFF Research Database (Denmark)

Dou, Chunxia; Yue, Dong; Han, Qing Long

2017-01-01

This paper is concerned with an event-triggered hybrid control for the energy Internet based on a multi-agent system approach with which renewable energy resources can be fully utilized to meet load demand with high security and well dynamical quality. In the design of control, a multi-agent system...

A microcomputer based multi parametric system for nuclear data acquisition and processing

International Nuclear Information System (INIS)

Toledo Acosta B, Rene; Osorio Deliz F, Juan; Arista Romeu, Eduardo; Perez Sanchez, Reinaldo; Lopes Torres, E.

1997-01-01

A four-parameter Multi parametric System for the acquisition and processing of nuclear data is described. It is characterized for its flexibility and relatively low cost, also guaranteeing a high acquisition capacity. The system allows to be utilized in a multi parametric manner, in pulse height analysis or in many combination of both for parameter. It is described the hardware and the software of the system

On fault propagation in deterioration of multi-component systems

International Nuclear Information System (INIS)

Liang, Zhenglin; Parlikad, Ajith Kumar; Srinivasan, Rengarajan; Rasmekomen, Nipat

2017-01-01

In extant literature, deterioration dependence among components can be modelled as inherent dependence and induced dependence. We find that the two types of dependence may co-exist and interact with each other in one multi-component system. We refer to this phenomenon as fault propagation. In practice, a fault induced by the malfunction of a non-critical component may further propagate through the dependence amongst critical components. Such fault propagation scenario happens in industrial assets or systems (bridge deck, and heat exchanging system). In this paper, a multi-layered vector-valued continuous-time Markov chain is developed to capture the characteristics of fault propagation. To obtain the mathematical tractability, we derive a partitioning rule to aggregate states with the same characteristics while keeping the overall aging behaviour of the multi-component system. Although the detailed information of components is masked by aggregated states, lumpability is attainable with the partitioning rule. It means that the aggregated process is stochastically equivalent to the original one and retains the Markov property. We apply this model on a heat exchanging system in oil refinery company. The results show that fault propagation has a more significant impact on the system's lifetime comparing with inherent dependence and induced dependence. - Highlights: • We develop a vector value continuous-time Markov chain to model the meta-dependent characteristic of fault propagation. • A partitioning rule is derived to reduce the state space and attain lumpability. • The model is applied on analysing the impact of fault propagation in a heat exchanging system.

Symplicity multi-electrode radiofrequency renal denervation system feasibility study.

Science.gov (United States)

Whitbourn, Robert; Harding, Scott A; Walton, Antony

2015-05-01

The aim of this study was to test the safety and performance of the Symplicity™ multi-electrode radio-frequency renal denervation system which was designed to reduce procedure time during renal denervation. The multi-electrode radiofrequency renal denervation system feasibility study is a prospective, non-randomised, open label, feasibility study that enrolled 50 subjects with hypertension. The study utilises a new renal denervation catheter which contains an array of four electrodes mounted in a helical configuration at 90 degrees from each other to deliver radiofrequency energy simultaneously to all four renal artery quadrants for 60 seconds. The protocol specified one renal denervation treatment towards the distal end of each main renal artery with radiofrequency energy delivered for 60 seconds per treatment. Total treatment time for both renal arteries was two minutes. The 12-month change in office systolic blood pressure (SBP) and 24-hour SBP was -19.2±25.2 mmHg, prenal artery stenosis or hypertensive emergencies occurred. The Symplicity multi-electrode radiofrequency renal denervation system was associated with a significant reduction in SBP at 12 months and minimal complications whilst it also reduced procedure time. NCT01699529.

Southwestern Institute of Physics: Annual Report 1998

International Nuclear Information System (INIS)

1999-10-01

The main achievements of controlled nuclear fusion research are presented for Southwestern Institute of Physics in 1998 year. With the establishment and operation of two auxiliary heating systems (NBI, ICRH), the HL-1M Tokamak is equipped with main auxiliary heating and current driving systems such as NBI, ECRH, ICRH and LHCD etc. . In addition, a variety of advanced fueling system, i.e. , multi-shot pellet and supersonic molecular beam injection, the first wall processing technologies of boronization, siliconization and lithiumization as well as more than 20 diagnostic facilities with partial space-time resolution capability have been established on the device. The construction of a larger Tokamak with divertors, the HL-2A, and its complementary systems are being carried out

Secure communication based on multi-input multi-output chaotic system with large message amplitude

International Nuclear Information System (INIS)

Zheng, G.; Boutat, D.; Floquet, T.; Barbot, J.P.

2009-01-01

This paper deals with the problem of secure communication based on multi-input multi-output (MIMO) chaotic systems. Single input secure communication based on chaos can be easily extended to multiple ones by some combinations technologies, however all the combined inputs possess the same risk to be broken. In order to reduce this risk, a new secure communication scheme based on chaos with MIMO is discussed in this paper. Moreover, since the amplitude of messages in traditional schemes is limited because it would affect the quality of synchronization, the proposed scheme is also improved into an amplitude-independent one.

Cost-benefit analysis of multi-regional nuclear energy systems deployment

International Nuclear Information System (INIS)

Van Den Durpel, L.G.G.; Wade, D.C.; Yacout, A.M.

2007-01-01

The paper describes the preliminary results of a cost/benefit-analysis of multi-regional nuclear energy system approaches with a focus on how multi-regional approaches may benefit a growing nuclear energy system in various world regions also being able to limit, or even reduce, the costs associated with the nuclear fuel cycle and facilitating the introduction of nuclear energy in various regions in the world. The paper highlights the trade-off one might envisage in deploying such multi-regional approaches but also the pay backs possible and concludes on the economical benefits one may associate to regional fuel cycle centres serving a world-fleet of STAR (small fast reactors of long refueling interval) where these STARs may be competitive compared to the LWRs (Light Water Reactors) as a base-case nuclear reactor option. (authors)

Cost-effective control policies for multi-echelon distribution systems

NARCIS (Netherlands)

Diks, E.B.; Kok, de A.G.

1996-01-01

In this paper we consider a divergent multi-echelon inventory system, e.g., a distribution system or a production system. At every stockpoint orders are placed periodically. The order arrives after a fixed lead time. At the end of each period linear costs may be incurred at each stockpoint for

Stability Analysis for a Multi-Camera Photogrammetric System

Directory of Open Access Journals (Sweden)

Ayman Habib

2014-08-01

Full Text Available Consumer-grade digital cameras suffer from geometrical instability that may cause problems when used in photogrammetric applications. This paper provides a comprehensive review of this issue of interior orientation parameter variation over time, it explains the common ways used for coping with the issue, and describes the existing methods for performing stability analysis for a single camera. The paper then points out the lack of coverage of stability analysis for multi-camera systems, suggests a modification of the collinearity model to be used for the calibration of an entire photogrammetric system, and proposes three methods for system stability analysis. The proposed methods explore the impact of the changes in interior orientation and relative orientation/mounting parameters on the reconstruction process. Rather than relying on ground truth in real datasets to check the system calibration stability, the proposed methods are simulation-based. Experiment results are shown, where a multi-camera photogrammetric system was calibrated three times, and stability analysis was performed on the system calibration parameters from the three sessions. The proposed simulation-based methods provided results that were compatible with a real-data based approach for evaluating the impact of changes in the system calibration parameters on the three-dimensional reconstruction.

Multi-Modal Intelligent Traffic Signal Systems (MMITSS) Basic Safety Message

Data.gov (United States)

Department of Transportation — Data were collected during the Multi-Modal Intelligent Transportation Signal Systems (MMITSS) study. MMITSS is a next-generation traffic signal system that seeks to...

Multi-target-qubit unconventional geometric phase gate in a multi-cavity system.

Science.gov (United States)

Liu, Tong; Cao, Xiao-Zhi; Su, Qi-Ping; Xiong, Shao-Jie; Yang, Chui-Ping

2016-02-22

Cavity-based large scale quantum information processing (QIP) may involve multiple cavities and require performing various quantum logic operations on qubits distributed in different cavities. Geometric-phase-based quantum computing has drawn much attention recently, which offers advantages against inaccuracies and local fluctuations. In addition, multiqubit gates are particularly appealing and play important roles in QIP. We here present a simple and efficient scheme for realizing a multi-target-qubit unconventional geometric phase gate in a multi-cavity system. This multiqubit phase gate has a common control qubit but different target qubits distributed in different cavities, which can be achieved using a single-step operation. The gate operation time is independent of the number of qubits and only two levels for each qubit are needed. This multiqubit gate is generic, e.g., by performing single-qubit operations, it can be converted into two types of significant multi-target-qubit phase gates useful in QIP. The proposal is quite general, which can be used to accomplish the same task for a general type of qubits such as atoms, NV centers, quantum dots, and superconducting qubits.

Power Distribution System Planning Evaluation by a Fuzzy Multi-Criteria Group Decision Support System

Directory of Open Access Journals (Sweden)

Tiefeng Zhang

2010-10-01

Full Text Available The evaluation of solutions is an important phase in power distribution system planning (PDSP which allows issues such as quality of supply, cost, social service and environmental implications to be considered and usually involves the judgments of a group of experts. The planning problem is thus suitable for the multi-criteria group decision-making (MCGDM method. The evaluation process and evaluation criteria often involve uncertainties incorporated in quantitative analysis with crisp values and qualitative judgments with linguistic terms; therefore, fuzzy sets techniques are applied in this study. This paper proposes a fuzzy multi-criteria group decision-making (FMCGDM method for PDSP evaluation and applies a fuzzy multi-criteria group decision support system (FMCGDSS to support the evaluation task. We introduce a PDSP evaluation model, which has evaluation criteria within three levels, based on the characteristics of a power distribution system. A case-based example is performed on a test distribution network and demonstrates how all the problems in a PDSP evaluation are addressed using FMCGDSS. The results are acceptable to expert evaluators.

Multi-agent robotic systems and applications for satellite missions

Science.gov (United States)

Nunes, Miguel A.

A revolution in the space sector is happening. It is expected that in the next decade there will be more satellites launched than in the previous sixty years of space exploration. Major challenges are associated with this growth of space assets such as the autonomy and management of large groups of satellites, in particular with small satellites. There are two main objectives for this work. First, a flexible and distributed software architecture is presented to expand the possibilities of spacecraft autonomy and in particular autonomous motion in attitude and position. The approach taken is based on the concept of distributed software agents, also referred to as multi-agent robotic system. Agents are defined as software programs that are social, reactive and proactive to autonomously maximize the chances of achieving the set goals. Part of the work is to demonstrate that a multi-agent robotic system is a feasible approach for different problems of autonomy such as satellite attitude determination and control and autonomous rendezvous and docking. The second main objective is to develop a method to optimize multi-satellite configurations in space, also known as satellite constellations. This automated method generates new optimal mega-constellations designs for Earth observations and fast revisit times on large ground areas. The optimal satellite constellation can be used by researchers as the baseline for new missions. The first contribution of this work is the development of a new multi-agent robotic system for distributing the attitude determination and control subsystem for HiakaSat. The multi-agent robotic system is implemented and tested on the satellite hardware-in-the-loop testbed that simulates a representative space environment. The results show that the newly proposed system for this particular case achieves an equivalent control performance when compared to the monolithic implementation. In terms on computational efficiency it is found that the multi

Multi-objective design of PV-wind-diesel-hydrogen-battery systems

Energy Technology Data Exchange (ETDEWEB)

Dufo-Lopez, Rodolfo; Bernal-Agustin, Jose L. [Department of Electrical Engineering, University of Zaragoza, Calle Maria de Luna 3, 50018-Zaragoza (Spain)

2008-12-15

This paper presents, for the first time, a triple multi-objective design of isolated hybrid systems minimizing, simultaneously, the total cost throughout the useful life of the installation, pollutant emissions (CO{sub 2}) and unmet load. For this task, a multi-objective evolutionary algorithm (MOEA) and a genetic algorithm (GA) have been used in order to find the best combination of components of the hybrid system and control strategies. As an example of application, a complex PV-wind-diesel-hydrogen-battery system has been designed, obtaining a set of possible solutions (Pareto Set). The results achieved demonstrate the practical utility of the developed design method. (author)

Building a Science Software Institute: Synthesizing the Lessons Learned from the ISEES and WSSI Software Institute Conceptualization Efforts

Science.gov (United States)

Idaszak, R.; Lenhardt, W. C.; Jones, M. B.; Ahalt, S.; Schildhauer, M.; Hampton, S. E.

2014-12-01

The NSF, in an effort to support the creation of sustainable science software, funded 16 science software institute conceptualization efforts. The goal of these conceptualization efforts is to explore approaches to creating the institutional, sociological, and physical infrastructures to support sustainable science software. This paper will present the lessons learned from two of these conceptualization efforts, the Institute for Sustainable Earth and Environmental Software (ISEES - http://isees.nceas.ucsb.edu) and the Water Science Software Institute (WSSI - http://waters2i2.org). ISEES is a multi-partner effort led by National Center for Ecological Analysis and Synthesis (NCEAS). WSSI, also a multi-partner effort, is led by the Renaissance Computing Institute (RENCI). The two conceptualization efforts have been collaborating due to the complementarity of their approaches and given the potential synergies of their science focus. ISEES and WSSI have engaged in a number of activities to address the challenges of science software such as workshops, hackathons, and coding efforts. More recently, the two institutes have also collaborated on joint activities including training, proposals, and papers. In addition to presenting lessons learned, this paper will synthesize across the two efforts to project a unified vision for a science software institute.

Automatic multi-camera calibration for deployable positioning systems

Science.gov (United States)

Axelsson, Maria; Karlsson, Mikael; Rudner, Staffan

2012-06-01

Surveillance with automated positioning and tracking of subjects and vehicles in 3D is desired in many defence and security applications. Camera systems with stereo or multiple cameras are often used for 3D positioning. In such systems, accurate camera calibration is needed to obtain a reliable 3D position estimate. There is also a need for automated camera calibration to facilitate fast deployment of semi-mobile multi-camera 3D positioning systems. In this paper we investigate a method for automatic calibration of the extrinsic camera parameters (relative camera pose and orientation) of a multi-camera positioning system. It is based on estimation of the essential matrix between each camera pair using the 5-point method for intrinsically calibrated cameras. The method is compared to a manual calibration method using real HD video data from a field trial with a multicamera positioning system. The method is also evaluated on simulated data from a stereo camera model. The results show that the reprojection error of the automated camera calibration method is close to or smaller than the error for the manual calibration method and that the automated calibration method can replace the manual calibration.

Multi-criteria sustainability assessment: A tool for evaluation of new energy system

Directory of Open Access Journals (Sweden)

Afgan Naim H.

2007-01-01

Full Text Available One of perspective methods for the evaluation of quality of energy system is the multi-criteria sustainability assessment, based on the analysis and synthesis of indicators expressing different aspects of the system. Application of this methodology in the cases of information deficiency (ASPID methodology enables evaluation of various energy systems. In the paper, the multi-criteria sustainability assessment of energy systems of various energy sources is used to evaluate the energy power system of Bosnia and Herzegovina. Eight different energy system options are taken into a consideration as the potential options for the capacity building within the energy power system of Bosnia and Herzegovina. It has included various renewable sources and fossil fuel clean technologies. Within the multi-criteria sustainability assessment method, sustainability indicators and weighting coefficients are defined and calculated, including: resource indicator, environment indicator, social indicator and economic indicator with respective weighting factors. The methodology includes the system of stochastic models of uncertainty in order to realize the assessment from various supporting systems, and to obtain respective normalization indexes by using non-numeric (ordinal, non-exact (interval, and non-complete information (NNN- information, for sources of various reliability and probability. By the analysis of multi-criteria sustainability assessment of selected options, the decision makers could be enabled to form opinion on quality of considered energy systems, and from the aspect of sustainability, make selection an optimum option of energy system. .

Safeguards considerations related to the use of multi-purpose canisters in the Civilian Radioactive Waste Management system

International Nuclear Information System (INIS)

Floyd, W.C.

1995-01-01

The US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for disposing of the nation's high-level radioactive waste. Currently, DOE is considering the use of Multi-Purpose Canisters (MPCs) to containerize commercial spent nuclear fuel (SNF) to be handled by the system. To achieve its safeguards and security objectives, OCRWM plans to institute a US Regulatory Commission (NRC)-approved safeguards program. Since the Mined Geologic Disposal System (MGDS) facility and a possible Monitored Retrievable Storage (MRS) facility may be subject to selection for International Atomic Energy Agency (IAEA) inspections, the safeguards program for MPCs may not preclude compliance with the requirements of the IAEA's Annex D, Special Criteria for Difficult-to-Access Fuel Items. MPC safeguards are based on three principles: Verification, Material Control and Accounting, and Physical Protection

The design and implementation of a PC based multi-channel scaler system

International Nuclear Information System (INIS)

Wang Qiang; Chinese Academy of Sciences, Beijing; Jin Dapeng; Liu Zhen'an; Zhao Dixin

2007-01-01

A multi-channel scaler system is designed for the system check and status monitoring of the BESIII trigger system. It is composed of a PC, two PCI interface multi-channel scaler cards, the corresponding drivers and user programs. Total 64 signals can be scaled and monitored in real time. The scaled data are recorded locally and some of them are distributed to the online system. In this paper, the hardware structure, software development and long time running stability of the system are introduced. (authors)

Fast Conflict Resolution Based on Reinforcement Learning in Multi-agent System

Institute of Scientific and Technical Information of China (English)

PIAOSonghao; HONGBingrong; CHUHaitao

2004-01-01

In multi-agent system where each agen thas a different goal (even the team of agents has the same goal), agents must be able to resolve conflicts arising in the process of achieving their goal. Many researchers presented methods for conflict resolution, e.g., Reinforcement learning (RL), but the conventional RL requires a large computation cost because every agent must learn, at the same time the overlap of actions selected by each agent results in local conflict. Therefore in this paper, we propose a novel method to solve these problems. In order to deal with the conflict within the multi-agent system, the concept of potential field function based Action selection priority level (ASPL) is brought forward. In this method, all kinds of environment factor that may have influence on the priority are effectively computed with the potential field function. So the priority to access the local resource can be decided rapidly. By avoiding the complex coordination mechanism used in general multi-agent system, the conflict in multi-agent system is settled more efficiently. Our system consists of RL with ASPL module and generalized rules module. Using ASPL, RL module chooses a proper cooperative behavior, and generalized rule module can accelerate the learning process. By applying the proposed method to Robot Soccer, the learning process can be accelerated. The results of simulation and real experiments indicate the effectiveness of the method.

Large Scale Document Inversion using a Multi-threaded Computing System

Science.gov (United States)

Jung, Sungbo; Chang, Dar-Jen; Park, Juw Won

2018-01-01

Current microprocessor architecture is moving towards multi-core/multi-threaded systems. This trend has led to a surge of interest in using multi-threaded computing devices, such as the Graphics Processing Unit (GPU), for general purpose computing. We can utilize the GPU in computation as a massive parallel coprocessor because the GPU consists of multiple cores. The GPU is also an affordable, attractive, and user-programmable commodity. Nowadays a lot of information has been flooded into the digital domain around the world. Huge volume of data, such as digital libraries, social networking services, e-commerce product data, and reviews, etc., is produced or collected every moment with dramatic growth in size. Although the inverted index is a useful data structure that can be used for full text searches or document retrieval, a large number of documents will require a tremendous amount of time to create the index. The performance of document inversion can be improved by multi-thread or multi-core GPU. Our approach is to implement a linear-time, hash-based, single program multiple data (SPMD), document inversion algorithm on the NVIDIA GPU/CUDA programming platform utilizing the huge computational power of the GPU, to develop high performance solutions for document indexing. Our proposed parallel document inversion system shows 2-3 times faster performance than a sequential system on two different test datasets from PubMed abstract and e-commerce product reviews. CCS Concepts •Information systems➝Information retrieval • Computing methodologies➝Massively parallel and high-performance simulations.

Multi-slit triode ion optical system with ballistic beam focusing

Energy Technology Data Exchange (ETDEWEB)

Davydenko, V., E-mail: V.I.Davydenko@inp.nsk.su; Amirov, V.; Gorbovsky, A.; Deichuli, P.; Ivanov, A.; Kolmogorov, A.; Kapitonov, V.; Mishagin, V.; Shikhovtsev, I.; Sorokin, A.; Stupishin, N. [Budker Institute of Nuclear Physics, Novosibirsk 630090 (Russian Federation); Karpushov, A. N. [Ecole Polytechnique Fédérale de Lausanne, Centre de Recherches en Physique des Plasmas (CRPP), CH-1015 Lausanne (Switzerland); Smirnov, A. [Tri Alpha Energy, Inc., Rancho Santa Margarita, California 92688 (United States); Uhlemann, R. [Institute of Energy and Climate Research-Plasma Physics, Research Center Juelich, 52425 Juelich (Germany)

2016-02-15

Multi-slit triode ion-optical systems with spherical electrodes are of interest for formation of intense focused neutral beams for plasma heating. At present, two versions of focusing multi-slit triode ion optical system are developed. The first ion optical system forms the proton beam with 15 keV energy, 140 A current, and 30 ms duration. The second ion optical system is intended for heating neutral beam injector of Tokamak Configuration Variable (TCV). The injector produces focused deuterium neutral beam with 35 keV energy, 1 MW power, and 2 s duration. In the later case, the angular beam divergence of the neutral beam is 20-22 mrad in the direction across the slits of the ion optical system and 12 mrad in the direction along the slits.

Building, breaking, overriding…? Migrants and institutional trust in the Danish welfare state

DEFF Research Database (Denmark)

Fersch, Barbara; Breidahl, Karen Nielsen

2018-01-01

Migrants constitute an interesting case concerning the question of how trust in welfare state institutions can emerge, as one can study their newly built relationships with such institutions in a distinct way. The Danish welfare state can be considered a ‘high trust’ context in terms of social...... and institutional trust. With the help of a multi-dimensional theoretical concept this paper provides an analysis of qualitative interviews with migrants on how institutional trust in the welfare state can emerge. Among other things, it finds that a perceived experience of distributive justice is of crucial...... importance for building trust and that strong trust in the systemic checks and balances of the welfare state can ‘override’ negative experiences at its access points, that is, welfare state professionals....

Multi-particle correlations in quaternionic quantum systems

International Nuclear Information System (INIS)

Brumby, S.P.; Joshi, G.C.

1994-01-01

The authors investigated the outcomes of measurements on correlated, few-body quantum systems described by a quaternionic quantum mechanics that allows for regions of quaternionic curvature. It was found that a multi particles interferometry experiment using a correlated system of four nonrelativistic, spin-half particles has the potential to detect the presence of quaternionic curvature. Two-body systems, however, are shown to give predictions identical to those of standard quantum mechanics when relative angles are used in the construction of the operators corresponding to measurements of particle spin components. 15 refs

EDDYMULT: a computing system for solving eddy current problems in a multi-torus system

International Nuclear Information System (INIS)

Nakamura, Yukiharu; Ozeki, Takahisa

1989-03-01

A new computing system EDDYMULT based on the finite element circuit method has been developed to solve actual eddy current problems in a multi-torus system, which consists of many torus-conductors and various kinds of axisymmetric poloidal field coils. The EDDYMULT computing system can deal three-dimensionally with the modal decomposition of eddy current in a multi-torus system, the transient phenomena of eddy current distributions and the resultant magnetic field. Therefore, users can apply the computing system to the solution of the eddy current problems in a tokamak fusion device, such as the design of poloidal field coil power supplies, the mechanical stress design of the intensive electromagnetic loading on device components and the control analysis of plasma position. The present report gives a detailed description of the EDDYMULT system as an user's manual: 1) theory, 2) structure of the code system, 3) input description, 4) problem restrictions, 5) description of the subroutines, etc. (author)

Linux block IO: introducing multi-queue SSD access on multi-core systems

DEFF Research Database (Denmark)

Bjørling, Matias; Axboe, Jens; Nellans, David

2013-01-01

The IO performance of storage devices has accelerated from hundreds of IOPS five years ago, to hundreds of thousands of IOPS today, and tens of millions of IOPS projected in five years. This sharp evolution is primarily due to the introduc- tion of NAND-flash devices and their data parallel desig...... generation block layer that is capable of handling tens of millions of IOPS on a multi-core system equipped with a single storage device. Our experiments show that our design scales graciously with the number of cores, even on NUMA systems with multiple sockets....

Meeting the Challenge: The National Cancer Institute's Central Institutional Review Board for Multi-Site Research.

Science.gov (United States)

Massett, Holly A; Hampp, Sharon L; Goldberg, Jacquelyn L; Mooney, Margaret; Parreco, Linda K; Minasian, Lori; Montello, Mike; Mishkin, Grace E; Davis, Catasha; Abrams, Jeffrey S

2018-03-10

The National Institutes of Health (NIH) issued a new policy that requires a single institutional review board (IRB) of record be used for all protocols funded by the NIH that are carried out at more than one site in the United States, effective January 2018. This policy affects several hundred clinical trials opened annually across the NIH. Limited data exist to compare the use of a single IRB to that of multiple local IRBs, so some institutions are resistant to or distrustful of single IRBs. Since 2001, the National Cancer Institute (NCI) has funded a central IRB (CIRB) that provides human patient reviews for its extensive national cancer clinical trials program. This paper presents data to show the adoption, efficiencies gained, and satisfaction of the CIRB among NCI trial networks and reviews key lessons gleaned from 16 years of experience that may be informative for others charged with implementation of the new NIH single-IRB policy.

Mainstreaming conservation agriculture in Malawi: Knowledge gaps and institutional barriers.

Science.gov (United States)

Dougill, Andrew J; Whitfield, Stephen; Stringer, Lindsay C; Vincent, Katharine; Wood, Benjamin T; Chinseu, Edna L; Steward, Peter; Mkwambisi, David D

2017-06-15

Conservation agriculture (CA) practices of reduced soil tillage, permanent organic soil coverage and intercropping/crop rotation, are being advocated globally, based on perceived benefits for crop yields, soil carbon storage, weed suppression, reduced soil erosion and improved soil water retention. However, some have questioned their efficacy due to uncertainty around the performance and trade-offs associated with CA practices, and their compatibility with the diverse livelihood strategies and varied agro-ecological conditions across African smallholder systems. This paper assesses the role of key institutions in Malawi in shaping pathways towards more sustainable land management based on CA by outlining their impact on national policy-making and the design and implementation of agricultural development projects. It draws on interviews at national, district and project levels and a multi-stakeholder workshop that mapped the institutional landscape of decision-making for agricultural land management practices. Findings identify knowledge gaps and institutional barriers that influence land management decision-making and constrain CA uptake. We use our findings to set out an integrated roadmap of research needs and policy options aimed at supporting CA as a route to enhanced sustainable land management in Malawi. Findings offer lessons that can inform design, planning and implementation of CA projects, and identify the multi-level institutional support structures required for mainstreaming sustainable land management in sub-Saharan Africa. Copyright © 2016 Elsevier Ltd. All rights reserved.

A formation control strategy with coupling weights for the multi-robot system

Science.gov (United States)

Liang, Xudong; Wang, Siming; Li, Weijie

2017-12-01

The distributed formation problem of the multi-robot system with general linear dynamic characteristics and directed communication topology is discussed. In order to avoid that the multi-robot system can not maintain the desired formation in the complex communication environment, the distributed cooperative algorithm with coupling weights based on zipf distribution is designed. The asymptotic stability condition for the formation of the multi-robot system is given, and the theory of the graph and the Lyapunov theory are used to prove that the formation can converge to the desired geometry formation and the desired motion rules of the virtual leader under this condition. Nontrivial simulations are performed to validate the effectiveness of the distributed cooperative algorithm with coupling weights.

Laser display system for multi-depth screen projection scenarios.

Science.gov (United States)

La Torre, J Pablo; Mayes, Nathan; Riza, Nabeel A

2017-11-10

Proposed is a laser projection display system that uses an electronically controlled variable focus lens (ECVFL) to achieve sharp and in-focus image projection over multi-distance three-dimensional (3D) conformal screens. The system also functions as an embedded distance sensor that enables 3D mapping of the multi-level screen platform before the desired laser scanned beam focused/defocused projected spot sizes are matched to the different localized screen distances on the 3D screen. Compared to conventional laser scanning and spatial light modulator (SLM) based projection systems, the proposed design offers in-focus non-distorted projection over a multi-distance screen zone with varying depths. An experimental projection system for a screen depth variation of 65 cm is demonstrated using a 633 nm laser beam, 3 KHz scan speed galvo-scanning mirrors, and a liquid-based ECVFL. As a basic demonstration, an in-house developed MATLAB based graphic user interface is deployed to work along with the laser projection display, enabling user inputs like text strings or predefined image projection. The user can specify projection screen distance, scanned laser linewidth, projected text font size, projected image dimensions, and laser scanning rate. Projected images are shown highlighting the 3D control capabilities of the display, including the production of a non-distorted image onto two-depths versus a distorted image via dominant prior-art projection methods.

Agent Based Fuzzy T-S Multi-Model System and Its Applications

Directory of Open Access Journals (Sweden)

Xiaopeng Zhao

2015-11-01

Full Text Available Based on the basic concepts of agent and fuzzy T-S model, an agent based fuzzy T-S multi-model (ABFT-SMM system is proposed in this paper. Different from the traditional method, the parameters and the membership value of the agent can be adjusted along with the process. In this system, each agent can be described as a dynamic equation, which can be seen as the local part of the multi-model, and it can execute the task alone or collaborate with other agents to accomplish a fixed goal. It is proved in this paper that the agent based fuzzy T-S multi-model system can approximate any linear or nonlinear system at arbitrary accuracy. The applications to the benchmark problem of chaotic time series prediction, water heater system and waste heat utilizing process illustrate the viability and the efficiency of the mentioned approach. At the same time, the method can be easily used to a number of engineering fields, including identification, nonlinear control, fault diagnostics and performance analysis.

Towards a Usability and Error "Safety Net": A Multi-Phased Multi-Method Approach to Ensuring System Usability and Safety.

Science.gov (United States)

Kushniruk, Andre; Senathirajah, Yalini; Borycki, Elizabeth

2017-01-01

The usability and safety of health information systems have become major issues in the design and implementation of useful healthcare IT. In this paper we describe a multi-phased multi-method approach to integrating usability engineering methods into system testing to ensure both usability and safety of healthcare IT upon widespread deployment. The approach involves usability testing followed by clinical simulation (conducted in-situ) and "near-live" recording of user interactions with systems. At key stages in this process, usability problems are identified and rectified forming a usability and technology-induced error "safety net" that catches different types of usability and safety problems prior to releasing systems widely in healthcare settings.

Remote Multi-layer Soil Temperature Monitoring System Based on GPRS

Directory of Open Access Journals (Sweden)

Ming Kuo CHEN

2014-02-01

Full Text Available There is the temperature difference between the upper and lower layer of the shallow soil in the forest. It is a potential energy that can be harvested by thermoelectric generator for the electronic device in the forest. The temperature distribution at different depths of the soil is the first step for thermoelectric generation. A remote multi-layer soil temperature monitoring system based on GPRS is proposed in this paper. The MSP430F149 MCU is used as the main controller of multi-layer soil temperature monitoring system. A temperature acquisition module is designed with DS18B20 and 4 core shielded twisted-pair cable. The GPRS module sends the measured data to remote server through wireless communication network. From the experiments in the campus of Beijing Forestry University, the maximum error of measured temperature in this system is 0.2°C by comparing with professional equipment in the same condition. The results of the experiments show that the system can accurately realize real-time monitoring of multi-layer soil temperature, and the data transmission is stable and reliable.

IMPROVEMENT OF SYSTEM OF COMPENSATION OF NPR OF HIGHER EDUCATION INSTITUTION

Directory of Open Access Journals (Sweden)

Andrey E. Shklyaev

2015-01-01

Full Text Available The article is devoted to the problem of formation of effective system of remuneration of scientific and pedagogical staff of the University. The characteristic of different systems of remuneration of teachers of Russian higher educational institutions. Formulated some proposals for improving the effectiveness of the remuneration system of the NRP of the University. The suggested remuneration system makes it possible to relate the amount of salary of each individual teacher’s or employee’s performance with educational institutions in General and his personal labour contribution in particular.

Structural Considerations of a 20MW Multi-Rotor Wind Energy System

International Nuclear Information System (INIS)

Jamieson, P; Branney, M

2014-01-01

The drive to upscale offshore wind turbines relates especially to possiblereductions in O and M and electrical interconnection costs per MW of installed capacity.Even with best current technologies, designs with rated capacity above about 3 MW are less cost effective exfactory per rated MW(turbine system costs) than smaller machines.Very large offshore wind turbines are thereforejustifiedprimarily by overall offshore project economics. Furthermore, continuing progress in materials and structures has been essential to avoid severe penalties in the power/mass ratio of large multi-MW machines.The multi-rotor concept employs many small rotors to maximise energy capture area withminimum systemvolume. Previous work has indicated that this can enablea very large reduction in the total weight and cost of rotors and drive trains compared to an equivalent large single rotor system.Thus the multi rotor concept may enable rated capacities of 20 MW or more at a single maintenancesite. Establishing the cost benefit of a multi rotor system requires examination of solutions for the support structure and yawing, ensuring aerodynamic losses from rotor interaction are not significant and that overall logistics, with much increased part count (more reliable components) and less consequence of single failuresare favourable. This paper addresses the viability of a support structure in respect of structural concept and likely weight as one necessary step in exploring the potential of the multi rotor concept

Structural Considerations of a 20MW Multi-Rotor Wind Energy System

Science.gov (United States)

Jamieson, P.; Branney, M.

2014-12-01

The drive to upscale offshore wind turbines relates especially to possiblereductions in O&M and electrical interconnection costs per MW of installed capacity.Even with best current technologies, designs with rated capacity above about 3 MW are less cost effective exfactory per rated MW(turbine system costs) than smaller machines.Very large offshore wind turbines are thereforejustifiedprimarily by overall offshore project economics. Furthermore, continuing progress in materials and structures has been essential to avoid severe penalties in the power/mass ratio of large multi-MW machines.The multi-rotor concept employs many small rotors to maximise energy capture area withminimum systemvolume. Previous work has indicated that this can enablea very large reduction in the total weight and cost of rotors and drive trains compared to an equivalent large single rotor system.Thus the multi rotor concept may enable rated capacities of 20 MW or more at a single maintenancesite. Establishing the cost benefit of a multi rotor system requires examination of solutions for the support structure and yawing, ensuring aerodynamic losses from rotor interaction are not significant and that overall logistics, with much increased part count (more reliable components) and less consequence of single failuresare favourable. This paper addresses the viability of a support structure in respect of structural concept and likely weight as one necessary step in exploring the potential of the multi rotor concept.

ERP systems in multi-national companies: support, maintenance and further development

OpenAIRE

Vymetal, Dominik; Matysek, Stanislav

2007-01-01

Multi-national companies introduce centralized or centrally administered ERP systems to cope with challenges of globalization. Introduction of such systems need careful planning. The planning should take not only the project and its deployment into consideration. Very important are the support and maintenance rules. The paper deals with rules used in case of a large multi-national company and resulting reaction of users in several subsidiaries in Central and Eastern Europe. The statistics obt...

Theories about architecture and performance of multi-agent systems

NARCIS (Netherlands)

Gazendam, Henk W.M.; Jorna, René J.

1998-01-01

Multi-agent systems are promising as models of organization because they are based on the idea that most work in human organizations is done based on intelligence, communication, cooperation, and massive parallel processing. They offer an alternative for system theories of organization, which are

Using Multi-Scale Modeling Systems and Satellite Data to Study the Precipitation Processes

Science.gov (United States)

Tao, Wei-Kuo; Chern, J.; Lamg, S.; Matsui, T.; Shen, B.; Zeng, X.; Shi, R.

2011-01-01

In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (l) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, the recent developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the precipitating systems and hurricanes/typhoons will be presented. The high-resolution spatial and temporal visualization will be utilized to show the evolution of precipitation processes. Also how to

Software network analyzer for computer network performance measurement planning over heterogeneous services in higher educational institutes

OpenAIRE

Ismail, Mohd Nazri

2009-01-01

In 21st century, convergences of technologies and services in heterogeneous environment have contributed multi-traffic. This scenario will affect computer network on learning system in higher educational Institutes. Implementation of various services can produce different types of content and quality. Higher educational institutes should have a good computer network infrastructure to support usage of various services. The ability of computer network should consist of i) higher bandwidth; ii) ...

The concept of intermodal network development in Poland using multi-agent systems

Directory of Open Access Journals (Sweden)

Leszek MINDUR

2011-01-01

Full Text Available The market share and the development of intermodal haulages, they are still at a very low level. It amounts in total goods transported by rail to 2,5% - 3%. The major reason for this situation is lack of coherent method for intermodal network designing. Such method should take into consideration strong relations between transport users, transport service providers, so the micro scale, as well as the regions where they are operating, so the meta scale.The aim of this paper is to present method which makes possible elimination of existing barriers in intermodal transport. The proposed method, for the sake of relations between actors involved in intermodal transport organisation, refers to multi-agent system concept. This system assumes coordinated actions in favour of concrete problem solution with support of cooperating agents, that is, in described paper, actors connected with intermodal transport.Paper presents results of the research project N509 398536, called: „Intermodal logistics network in Poland – concept of model solutions and implementation aspects” carried out by the Institute of Logistics and Warehousing under scientific leadership of professor Leszek Mindur.

Quantum system driven by incoherent a.c fields: Multi-crossing Landau Zener dynamics

Energy Technology Data Exchange (ETDEWEB)

Jipdi, M.N., E-mail: jmichaelnicky@yahoo.fr; Fai, L.C.; Tchoffo, M.

2016-10-23

The paper investigates the multi-crossing dynamics of a Landau–Zener (LZ) system driven by two sinusoidal a.c fields applying the Dynamic Matrix approach (DMA). The system is shown to follow one-crossing and multi-crossing dynamics for low and high frequency regime respectively. It is shown that in low frequency regime, the resonance phenomenon occurs and leads to the decoupling of basis states; the effective gap vanishes and then the complete blockage of the system. For high frequency, the system achieves multi-crossing dynamics with two fictitious crossings; the system models a Landau–Zener–Stückelberg (LZS) interferometer with critical parameters that tailor probabilities. The system is then shown to depend only on the phase that permits the easiest control with possible application in implementing logic gates.

Multi-Disciplinary System Reliability Analysis

Science.gov (United States)

Mahadevan, Sankaran; Han, Song

1997-01-01

The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code developed under the leadership of NASA Lewis Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multi-disciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

Design and experimental investigation of a Multi-segment plate concentrated photovoltaic solar energy system

International Nuclear Information System (INIS)

Wang, Gang; Chen, Zeshao; Hu, Peng

2017-01-01

Highlights: • A multi-segment plate concentrated photovoltaic solar energy system was proposed. • A prototype of this new concentrator was developed for experimental investigation. • Experimental investigation results showed a good concentrating uniformity. - Abstract: Solar energy is one of the most promising renewable energies and meaningful for the sustainable development of energy source. A multi-segment plate concentrated photovoltaic (CPV) solar power system was proposed in this paper, the design principle of the multi-segment plate concentrator of this solar power system was given, which could provide uniform solar radiation flux density distribution on solar cells. A prototype of this multi-segment plate CPV solar power system was developed for the experimental study, aiming at the investigations of solar radiation flux density distribution and PV performances under this concentrator design. The experimental results showed that the solar radiation flux density distribution provided by the multi-segment plate concentrator had a good uniformity, and the number and temperature of solar cells both influence the photoelectric transformation efficiency of the CPV solar power system.

Fuzzy logic based power-efficient real-time multi-core system

CERN Document Server

Ahmed, Jameel; Najam, Shaheryar; Najam, Zohaib

2017-01-01

This book focuses on identifying the performance challenges involved in computer architectures, optimal configuration settings and analysing their impact on the performance of multi-core architectures. Proposing a power and throughput-aware fuzzy-logic-based reconfiguration for Multi-Processor Systems on Chip (MPSoCs) in both simulation and real-time environments, it is divided into two major parts. The first part deals with the simulation-based power and throughput-aware fuzzy logic reconfiguration for multi-core architectures, presenting the results of a detailed analysis on the factors impacting the power consumption and performance of MPSoCs. In turn, the second part highlights the real-time implementation of fuzzy-logic-based power-efficient reconfigurable multi-core architectures for Intel and Leone3 processors. .

Matched-pair analysis of a multi-institutional cohort reveals that epidermal growth factor receptor mutation is not a risk factor for postoperative recurrence of lung adenocarcinoma.

Science.gov (United States)

Matsumura, Yuki; Suzuki, Hiroyuki; Ohira, Tetsuya; Shiono, Satoshi; Abe, Jiro; Sagawa, Motoyasu; Sakurada, Akira; Katahira, Masato; Machida, Yuichiro; Takahashi, Satomi; Okada, Yoshinori

2017-12-01

It is unclear whether epidermal growth factor receptor (EGFR) mutation status is a risk factor for postoperative recurrence of surgically resected lung adenocarcinoma (ADC). Therefore, we conducted a multi-institutional study employing matched-pair analysis to compare recurrence-free survival (RFS) and overall survival (OS) of patients with lung ADC according to EGFR mutation status. We collected the records of 909 patients who underwent surgical resection for lung ADC between 2005 and 2012 at five participating institutions and were also examined their EGFR mutation status. For each patient with an EGFR mutation, we selected one with the wild-type EGFR sequence and matched them according to institution, age, gender, smoking history, pathological stage (pStage), and adjuvant treatment. We compared RFS and OS of the matched cohort. The patients were allocated into groups (n=181 each) with mutated or wild-type EGFR sequences. Both cohorts had identical characteristics as follows: institution, median age (68 years), men (85, 47%), ever smokers (77, 43%), and pStage (IA, 108, 60%; IB, 48, 27%; II, 14, 8%; III, 11, 6%). The 3- and 5-year RFS rates of patients with mutated or wild-type EGFR sequence were 79%, 68% and 77%, 68%, respectively (p=0.557). The respective OS rates were 92%, 81%, and 89%, 79% (p=0.574). Matched-pair and multi-institutional analysis reveals that an EGFR mutation was not a significant risk factor for recurrence of patients with surgically resected lung adenocarcinoma. Copyright © 2017 Elsevier B.V. All rights reserved.

Multi-state reliability for pump group in system based on UGF and semi-Markov process

International Nuclear Information System (INIS)

Shang Yanlong; Cai Qi; Zhao Xinwen; Chen Ling

2012-01-01

In this paper, multi-state reliability value of pump group in nuclear power system is obtained by the combination method of the universal generating function (UGF) and Semi-Markov process. UGF arithmetic model of multi-state system reliability is studied, and the performance state probability expression of multi-state component is derived using semi-Markov theory. A quantificational model is defined to express the performance rate of the system and component. Different availability results by multi-state and binary state analysis method are compared under the condition whether the performance rate can satisfy the demanded value, and the mean value of system instantaneous output performance is also obtained. It shows that this combination method is an effective and feasible one which can quantify the effect of the partial failure on the system reliability, and the result of multi-state system reliability by this method deduces the modesty of the reliability value obtained by binary reliability analysis method. (authors)

In-Pile Instrumentation Multi- Parameter System Utilizing Photonic Fibers and Nanovision

Energy Technology Data Exchange (ETDEWEB)

Burgett, Eric [Idaho State Univ., Pocatello, ID (United States)

2015-10-13

An advanced in-pile multi-parameter reactor monitoring system is being proposed in this funding opportunity. The proposed effort brings cutting edge, high fidelity optical measurement systems into the reactor environment in an unprecedented fashion, including in-core, in-cladding and in-fuel pellet itself. Unlike instrumented leads, the proposed system provides a unique solution to a multi-parameter monitoring need in core while being minimally intrusive in the reactor core. Detector designs proposed herein can monitor fuel compression and expansion in both the radial and axial dimensions as well as monitor linear power profiles and fission rates during the operation of the reactor. In addition to pressure, stress, strain, compression, neutron flux, neutron spectra, and temperature can be observed inside the fuel bundle and fuel rod using the proposed system. The proposed research aims at developing radiation-hard, harsh-environment multi-parameter systems for insertion into the reactor environment. The proposed research holds the potential to drastically increase the fidelity and precision of in-core instrumentation with little or no impact in the neutron economy in the reactor environment while providing a measurement system capable of operation for entire operating cycles.

In-Pile Instrumentation Multi- Parameter System Utilizing Photonic Fibers and Nanovision

International Nuclear Information System (INIS)

Burgett, Eric

2015-01-01

An advanced in-pile multi-parameter reactor monitoring system is being proposed in this funding opportunity. The proposed effort brings cutting edge, high fidelity optical measurement systems into the reactor environment in an unprecedented fashion, including in-core, in-cladding and in-fuel pellet itself. Unlike instrumented leads, the proposed system provides a unique solution to a multi-parameter monitoring need in core while being minimally intrusive in the reactor core. Detector designs proposed herein can monitor fuel compression and expansion in both the radial and axial dimensions as well as monitor linear power profiles and fission rates during the operation of the reactor. In addition to pressure, stress, strain, compression, neutron flux, neutron spectra, and temperature can be observed inside the fuel bundle and fuel rod using the proposed system. The proposed research aims at developing radiation-hard, harsh-environment multi-parameter systems for insertion into the reactor environment. The proposed research holds the potential to drastically increase the fidelity and precision of in-core instrumentation with little or no impact in the neutron economy in the reactor environment while providing a measurement system capable of operation for entire operating cycles.

Division III Student-Athletes' Experiences of Institutional Social and Academic Systems

Science.gov (United States)

Becht, Louis A., Jr.

2017-01-01

The purpose of this qualitative study was to expand the literature on Division III student-athletes by examining their integration into the social and academic systems at one institution located in northeastern United States. This study examined participants' experiences within institutional social and academic systems designed for…

Oblique Multi-Camera Systems - Orientation and Dense Matching Issues

Science.gov (United States)

Rupnik, E.; Nex, F.; Remondino, F.

2014-03-01

The use of oblique imagery has become a standard for many civil and mapping applications, thanks to the development of airborne digital multi-camera systems, as proposed by many companies (Blomoblique, IGI, Leica, Midas, Pictometry, Vexcel/Microsoft, VisionMap, etc.). The indisputable virtue of oblique photography lies in its simplicity of interpretation and understanding for inexperienced users allowing their use of oblique images in very different applications, such as building detection and reconstruction, building structural damage classification, road land updating and administration services, etc. The paper reports an overview of the actual oblique commercial systems and presents a workflow for the automated orientation and dense matching of large image blocks. Perspectives, potentialities, pitfalls and suggestions for achieving satisfactory results are given. Tests performed on two datasets acquired with two multi-camera systems over urban areas are also reported.

Robust Consensus of Multi-Agent Systems with Uncertain Exogenous Disturbances

International Nuclear Information System (INIS)

Yang Hong-Yong; Guo Lei; Han Chao

2011-01-01

The objective of this paper is to investigate the consensus of the multi-agent systems with nonlinear coupling function and external disturbances. The disturbance includes two parts, one part is supposed to be generated by an exogenous system, which is not required to be neutrally stable as in the output regulation theory, the other part is the modeling uncertainty in the exogenous disturbance system. A novel composite disturbance observer based control (DOBC) and H ∞ control scheme is presented so that the disturbance with the exogenous system can be estimated and compensated and the consensus of the multi-agent systems with fixed and switching graph can be reached by using H ∞ control law. Simulations demonstrate the advantages of the proposed DOBC and H ∞ control scheme. (interdisciplinary physics and related areas of science and technology)

Interobserver variability of clinical target volume delineation in supra-diaphragmatic Hodgkin's disease. A multi-institutional experience

International Nuclear Information System (INIS)

Genovesi, Domenico; Cefaro, Giampiero Ausili; Vinciguerra, Annamaria

2011-01-01

To determine interobserver variability in clinical target volume (CTV) of supra-diaphragmatic Hodgkin's lymphoma. At the 2008 AIRO (Italian Society of Radiation Oncology) Meeting, the Radiation Oncology Department of Chieti proposed a multi-institutional contouring dummy-run of two cases of early stage supra-diaphragmatic Hodgkin's lymphoma after chemotherapy. Clinical history, diagnostics, and planning CT imaging were available on Chieti's radiotherapy website (www.radioterapia.unich.it). Participating centers were requested to delineate the CTV and submit it to the coordinating center. To quantify interobserver variability of CTV delineations, the total volume, craniocaudal, laterolateral, and anteroposterior diameters were calculated. A total of 18 institutions for case A and 15 institutions for case B submitted the targets. Case A presented significant variability in total volume (range: 74.1-1,157.1 cc), craniocaudal (range: 6.5-22.5 cm; median: 16.25 cm), anteroposterior (range: 5.04-14.82 cm; median: 10.28 cm), and laterolateral diameters (range: 8.23-22.88 cm; median: 15.5 cm). Mean CTV was 464.8 cc (standard deviation: 280.5 cc). Case B presented significant variability in total volume (range: 341.8-1,662 cc), cranio-caudal (range: 8.0-28.5 cm; median: 23 cm), anteroposterior (range: 7.9-1.8 cm; median: 11.1 cm), and laterolateral diameters (range: 12.9-24.0 cm; median: 18.8 cm). Mean CTV was 926.0 cc (standard deviation: 445.7 cc). This significant variability confirms the need to apply specific guidelines to improve contouring uniformity in Hodgkin's lymphoma. (orig.)

Pruning techniques for multi-objective system-level design space exploration

NARCIS (Netherlands)

Piscitelli, R.

2014-01-01

System-level design space exploration (DSE), which is performed early in the design process, is of eminent importance to the design of complex multi-processor embedded system architectures. During system-level DSE, system parameters like, e.g., the number and type of processors, the type and size of

Distributed consensus with visual perception in multi-robot systems

CERN Document Server

Montijano, Eduardo

2015-01-01

This monograph introduces novel responses to the different problems that arise when multiple robots need to execute a task in cooperation, each robot in the team having a monocular camera as its primary input sensor. Its central proposition is that a consistent perception of the world is crucial for the good development of any multi-robot application. The text focuses on the high-level problem of cooperative perception by a multi-robot system: the idea that, depending on what each robot sees and its current situation, it will need to communicate these things to its fellows whenever possible to share what it has found and keep updated by them in its turn. However, in any realistic scenario, distributed solutions to this problem are not trivial and need to be addressed from as many angles as possible. Distributed Consensus with Visual Perception in Multi-Robot Systems covers a variety of related topics such as: ·         distributed consensus algorithms; ·         data association and robustne...

A new multi-objective optimization model for preventive maintenance and replacement scheduling of multi-component systems

Science.gov (United States)

Moghaddam, Kamran S.; Usher, John S.

2011-07-01

In this article, a new multi-objective optimization model is developed to determine the optimal preventive maintenance and replacement schedules in a repairable and maintainable multi-component system. In this model, the planning horizon is divided into discrete and equally-sized periods in which three possible actions must be planned for each component, namely maintenance, replacement, or do nothing. The objective is to determine a plan of actions for each component in the system while minimizing the total cost and maximizing overall system reliability simultaneously over the planning horizon. Because of the complexity, combinatorial and highly nonlinear structure of the mathematical model, two metaheuristic solution methods, generational genetic algorithm, and a simulated annealing are applied to tackle the problem. The Pareto optimal solutions that provide good tradeoffs between the total cost and the overall reliability of the system can be obtained by the solution approach. Such a modeling approach should be useful for maintenance planners and engineers tasked with the problem of developing recommended maintenance plans for complex systems of components.

Rendezvous with connectivity preservation for multi-robot systems with an unknown leader

Science.gov (United States)

Dong, Yi

2018-02-01

This paper studies the leader-following rendezvous problem with connectivity preservation for multi-agent systems composed of uncertain multi-robot systems subject to external disturbances and an unknown leader, both of which are generated by a so-called exosystem with parametric uncertainty. By combining internal model design, potential function technique and adaptive control, two distributed control strategies are proposed to maintain the connectivity of the communication network, to achieve the asymptotic tracking of all the followers to the output of the unknown leader system, as well as to reject unknown external disturbances. It is also worth to mention that the uncertain parameters in the multi-robot systems and exosystem are further allowed to belong to unknown and unbounded sets when applying the second fully distributed control law containing a dynamic gain inspired by high-gain adaptive control or self-tuning regulator.

Explicit/multi-parametric model predictive control (MPC) of linear discrete-time systems by dynamic and multi-parametric programming

KAUST Repository

Kouramas, K.I.

2011-08-01

This work presents a new algorithm for solving the explicit/multi- parametric model predictive control (or mp-MPC) problem for linear, time-invariant discrete-time systems, based on dynamic programming and multi-parametric programming techniques. The algorithm features two key steps: (i) a dynamic programming step, in which the mp-MPC problem is decomposed into a set of smaller subproblems in which only the current control, state variables, and constraints are considered, and (ii) a multi-parametric programming step, in which each subproblem is solved as a convex multi-parametric programming problem, to derive the control variables as an explicit function of the states. The key feature of the proposed method is that it overcomes potential limitations of previous methods for solving multi-parametric programming problems with dynamic programming, such as the need for global optimization for each subproblem of the dynamic programming step. © 2011 Elsevier Ltd. All rights reserved.

Integrating multi-view transmission system into MPEG-21 stereoscopic and multi-view DIA (digital item adaptation)

Science.gov (United States)

Lee, Seungwon; Park, Ilkwon; Kim, Manbae; Byun, Hyeran

2006-10-01

As digital broadcasting technologies have been rapidly progressed, users' expectations for realistic and interactive broadcasting services also have been increased. As one of such services, 3D multi-view broadcasting has received much attention recently. In general, all the view sequences acquired at the server are transmitted to the client. Then, the user can select a part of views or all the views according to display capabilities. However, this kind of system requires high processing power of the server as well as the client, thus posing a difficulty in practical applications. To overcome this problem, a relatively simple method is to transmit only two view-sequences requested by the client in order to deliver a stereoscopic video. In this system, effective communication between the server and the client is one of important aspects. In this paper, we propose an efficient multi-view system that transmits two view-sequences and their depth maps according to user's request. The view selection process is integrated into MPEG-21 DIA (Digital Item Adaptation) so that our system is compatible to MPEG-21 multimedia framework. DIA is generally composed of resource adaptation and descriptor adaptation. It is one of merits that SVA (stereoscopic video adaptation) descriptors defined in DIA standard are used to deliver users' preferences and device capabilities. Furthermore, multi-view descriptions related to multi-view camera and system are newly introduced. The syntax of the descriptions and their elements is represented in XML (eXtensible Markup Language) schema. If the client requests an adapted descriptor (e.g., view numbers) to the server, then the server sends its associated view sequences. Finally, we present a method which can reduce user's visual discomfort that might occur while viewing stereoscopic video. This phenomenon happens when view changes as well as when a stereoscopic image produces excessive disparity caused by a large baseline between two cameras. To

System Engineering Strategy for Distributed Multi-Purpose Simulation Architectures

Science.gov (United States)

Bhula, Dlilpkumar; Kurt, Cindy Marie; Luty, Roger

2007-01-01

This paper describes the system engineering approach used to develop distributed multi-purpose simulations. The multi-purpose simulation architecture focuses on user needs, operations, flexibility, cost and maintenance. This approach was used to develop an International Space Station (ISS) simulator, which is called the International Space Station Integrated Simulation (ISIS)1. The ISIS runs unmodified ISS flight software, system models, and the astronaut command and control interface in an open system design that allows for rapid integration of multiple ISS models. The initial intent of ISIS was to provide a distributed system that allows access to ISS flight software and models for the creation, test, and validation of crew and ground controller procedures. This capability reduces the cost and scheduling issues associated with utilizing standalone simulators in fixed locations, and facilitates discovering unknowns and errors earlier in the development lifecycle. Since its inception, the flexible architecture of the ISIS has allowed its purpose to evolve to include ground operator system and display training, flight software modification testing, and as a realistic test bed for Exploration automation technology research and development.

A heuristic for solving the redundancy allocation problem for multi-state series-parallel systems

International Nuclear Information System (INIS)

Ramirez-Marquez, Jose E.; Coit, David W.

2004-01-01

The redundancy allocation problem is formulated with the objective of minimizing design cost, when the system exhibits a multi-state reliability behavior, given system-level performance constraints. When the multi-state nature of the system is considered, traditional solution methodologies are no longer valid. This study considers a multi-state series-parallel system (MSPS) with capacitated binary components that can provide different multi-state system performance levels. The different demand levels, which must be supplied during the system-operating period, result in the multi-state nature of the system. The new solution methodology offers several distinct benefits compared to traditional formulations of the MSPS redundancy allocation problem. For some systems, recognizing that different component versions yield different system performance is critical so that the overall system reliability estimation and associated design models the true system reliability behavior more realistically. The MSPS design problem, solved in this study, has been previously analyzed using genetic algorithms (GAs) and the universal generating function. The specific problem being addressed is one where there are multiple component choices, but once a component selection is made, only the same component type can be used to provide redundancy. This is the first time that the MSPS design problem has been addressed without using GAs. The heuristic offers more efficient and straightforward analyses. Solutions to three different problem types are obtained illustrating the simplicity and ease of application of the heuristic without compromising the intended optimization needs

Innovation and institutional change. The transition to a sustainable electricity system

Energy Technology Data Exchange (ETDEWEB)

Hofman, P.S.

2005-12-02

Central to this book is the understanding that transformation of systems of production and consumption involves a process of co-evolution of institutional and technological change and involves changes in institutions at different levels and between those levels. At the micro level it involves the development of a new product, technology or concept, made possible as a variety of actors, such as firms, policy-makers, customers, change their way of doing things. At the meso-level it involves changes in practices at the level of sectors, and at the macro-level it involves changes in systems of innovation and regulation. Systems change slowly occurs as changes at different levels start to connect and synchronise, leading to the emergence of new institutional fabric that creates linkages between the different levels. The aim of this book is to specify this perspective by analysing patterns of change in the electricity system. Scientifically, the relevance of the book is in its analysis and explanation of fundamental processes of change, a topic relevant for a range of scientific disciplines, from economics, sociology, technology studies, to policy science. Its societal relevance lies mainly in its use for gaining insight in the way systems change can be directed towards the normative goal of sustainable development. The overall research questions by which this research is guided are: To what extent can the dynamics of transformation in the electricity system be understood as the interaction between technological and institutional change?, applied more specifically to: (a) how does this dynamics take place at and between different levels?; (b) when and how does this dynamics reinforce the existing system, representing processes of lock-in, or destabilise the existing system, representing processes of escaping lock-in?; and, (c) how can these insights be utilised to direct systems change in a more sustainable direction? Chapter two presents an overview of theoretical work

Innovation and institutional change. The transition to a sustainable electricity system

International Nuclear Information System (INIS)

Hofman, P.S.

2005-01-01

Central to this book is the understanding that transformation of systems of production and consumption involves a process of co-evolution of institutional and technological change and involves changes in institutions at different levels and between those levels. At the micro level it involves the development of a new product, technology or concept, made possible as a variety of actors, such as firms, policy-makers, customers, change their way of doing things. At the meso-level it involves changes in practices at the level of sectors, and at the macro-level it involves changes in systems of innovation and regulation. Systems change slowly occurs as changes at different levels start to connect and synchronise, leading to the emergence of new institutional fabric that creates linkages between the different levels. The aim of this book is to specify this perspective by analysing patterns of change in the electricity system. Scientifically, the relevance of the book is in its analysis and explanation of fundamental processes of change, a topic relevant for a range of scientific disciplines, from economics, sociology, technology studies, to policy science. Its societal relevance lies mainly in its use for gaining insight in the way systems change can be directed towards the normative goal of sustainable development. The overall research questions by which this research is guided are: To what extent can the dynamics of transformation in the electricity system be understood as the interaction between technological and institutional change?, applied more specifically to: (a) how does this dynamics take place at and between different levels?; (b) when and how does this dynamics reinforce the existing system, representing processes of lock-in, or destabilise the existing system, representing processes of escaping lock-in?; and, (c) how can these insights be utilised to direct systems change in a more sustainable direction? Chapter two presents an overview of theoretical work

Design Optimization of Multi-Cluster Embedded Systems for Real-Time Applications

DEFF Research Database (Denmark)

Pop, Paul; Eles, Petru; Peng, Zebo

2004-01-01

We present an approach to design optimization of multi-cluster embedded systems consisting of time-triggered and event-triggered clusters, interconnected via gateways. In this paper, we address design problems which are characteristic to multi-clusters: partitioning of the system functionality...... into time-triggered and event-triggered domains, process mapping, and the optimization of parameters corresponding to the communication protocol. We present several heuristics for solving these problems. Our heuristics are able to find schedulable implementations under limited resources, achieving...... an efficient utilization of the system. The developed algorithms are evaluated using extensive experiments and a real-life example....

Design Optimization of Multi-Cluster Embedded Systems for Real-Time Applications

DEFF Research Database (Denmark)

Pop, Paul; Eles, Petru; Peng, Zebo

2006-01-01

We present an approach to design optimization of multi-cluster embedded systems consisting of time-triggered and event-triggered clusters, interconnected via gateways. In this paper, we address design problems which are characteristic to multi-clusters: partitioning of the system functionality...... into time-triggered and event-triggered domains, process mapping, and the optimization of parameters corresponding to the communication protocol. We present several heuristics for solving these problems. Our heuristics are able to find schedulable implementations under limited resources, achieving...... an efficient utilization of the system. The developed algorithms are evaluated using extensive experiments and a real-life example....

Modeling, Control and Analyze of Multi-Machine Drive Systems using Bond Graph Technique

Directory of Open Access Journals (Sweden)

J. Belhadj

2006-03-01

Full Text Available In this paper, a system viewpoint method has been investigated to study and analyze complex systems using Bond Graph technique. These systems are multimachine multi-inverter based on Induction Machine (IM, well used in industries like rolling mills, textile, and railway traction. These systems are multi-domains, multi-scales time and present very strong internal and external couplings, with non-linearity characterized by a high model order. The classical study with analytic model is difficult to manipulate and it is limited to some performances. In this study, a “systemic approach” is presented to design these kinds of systems, using an energetic representation based on Bond Graph formalism. Three types of multimachine are studied with their control strategies. The modeling is carried out by Bond Graph and results are discussed to show the performances of this methodology

Multi-Modal Traveler Information System - GCM Corridor Architecture Functional Requirements

Science.gov (United States)

1997-11-17

The Multi-Modal Traveler Information System (MMTIS) project involves a large number of Intelligent Transportation System (ITS) related tasks. It involves research of all ITS initiatives in the Gary-Chicago-Milwaukee (GCM) Corridor which are currently...

Agent and multi-Agent systems in distributed systems digital economy and e-commerce

CERN Document Server

Hartung, Ronald

2013-01-01

Information and communication technology, in particular artificial intelligence, can be used to support economy and commerce using digital means. This book is about agents and multi-agent distributed systems applied to digital economy and e-commerce to meet, improve, and overcome challenges in the digital economy and e-commerce sphere. Agent and multi-agent solutions are applied in implementing real-life, exciting developments associated with the need to eliminate problems of distributed systems.   The book presents solutions for both technology and applications, illustrating the possible uses of agents in the enterprise domain, covering design and analytic methods, needed to provide a solid foundation required for practical systems. More specifically, the book provides solutions for the digital economy, e-sourcing clusters in network economy, and knowledge exchange between agents applicable to online trading agents, and security solutions to both digital economy and e-commerce. Furthermore, it offers soluti...

Interacting with Multi-Robot Systems Using BML

Science.gov (United States)

2013-06-01

presented to the operator. 1. Introduction There are many operations in which a multi-robot system (MRS) can be deployed to support the human forces...within the MRS easily. © Fraunhofer FKIE Communication Architecture ~ ~ Fraunhofer FKIE © Fraunhofer FKIE Battle Mangement Language BML...Fraunhofer FKIE Battle Mangement Language Orders Orders move patrol observe distribute guard recce imagery intelligence gathering

The Resilience of Kepler Multi-systems to Stellar Obliquity

Science.gov (United States)

Spalding, Christopher; Marx, Noah W.; Batygin, Konstantin

2018-04-01

The Kepler mission and its successor K2 have brought forth a cascade of transiting planets. Many of these planetary systems exhibit multiple transiting members. However, a large fraction possesses only a single transiting planet. This high abundance of singles, dubbed the "Kepler Dichotomy," has been hypothesized to arise from significant mutual inclinations between orbits in multi-planet systems. Alternatively, the single-transiting population truly possesses no other planets in the system, but the true origin of the overabundance of single systems remains unresolved. In this work, we propose that planetary systems typically form with a coplanar, multiple-planetary architecture, but that quadrupolar gravitational perturbations from their rapidly-rotating host star subsequently disrupt this primordial coplanarity. We demonstrate that, given sufficient stellar obliquity, even systems beginning with 2 planetary constituents are susceptible to dynamical instability soon after planet formation, as a result of the stellar quadrupole moment. This mechanism stands as a widespread, yet poorly explored pathway toward planetary system instability. Moreover, by requiring that observed multi-systems remain coplanar on Gyr timescales, we are able to place upper limits on the stellar obliquity in systems such as K2-38 (obliquity < 20 degrees), where other methods of measuring spin-orbit misalignment are not currently available.

A new financial budgetary system for community health services institutions in China.

Science.gov (United States)

You, Chuanmei; Yao, Lan; Fu, Jiakang; Wang, Fang; Wang, Hongqing; Dai, Tao

2011-01-01

The separation of revenue and expenditure budgets (SREB) is a new financial budgetary system that is being implemented in community health services (CHS) institutions in some areas in China. Through literature review, it was found that, derived from the traditional separation of revenue and expenditure budgets (TSREB) implemented in administrative public services units, SREB and TSREB have something in common and yet many more differences. On the basis of some quantitative and qualitative data that were collected by field survey, it was also found that implementation of SREB in CHS institutions brings positive outcomes in terms of the quantity, quality and efficiency of services; residents' satisfaction; and the behavior of CHS institutions. The conclusion can be suggested that SREB, as a system having impact upon the incentives facing CHS institutions and the nature of governmental responsibility for developing CHS in China, will promote CHS institutions to fulfill basic service functions if implemented well. Therefore, it is a system that is worth further development and evaluation. Copyright © 2011 John Wiley & Sons, Ltd.

Interval availability analysis of a two-echelon, multi-item system

NARCIS (Netherlands)

Al Hanbali, Ahmad; van der Heijden, Matthijs C.

2011-01-01

In this paper we analyze the interval availability of a two-echelon, multi-item spare part inventory system. We consider a scenario inspired by a situation that we encountered at Thales Netherlands, a manufacturer of naval sensors and naval command and control systems. Modeling the complete system

A nuclear radiation multi-parameter measurement system based on pulse-shape sampling

International Nuclear Information System (INIS)

Qiu Xiaolin; Fang Guoming; Xu Peng; Di Yuming

2007-01-01

In this paper, A nuclear radiation multi-parameter measurement system based on pulse-shape sampling is introduced, including the system's characteristics, composition, operating principle, experiment data and analysis. Compared with conventional nuclear measuring apparatus, it has some remarkable advantages such as the synchronous detection using multi-parameter measurement in the same measurement platform and the general analysis of signal data by user-defined program. (authors)

Towards Coordination and Control of Multi-robot Systems

DEFF Research Database (Denmark)

Quottrup, Michael Melholt

This thesis focuses on control and coordination of mobile multi-robot systems (MRS). MRS can often deal with tasks that are difficult to be accomplished by a single robot. One of the challenges is the need to control, coordinate and synchronize the operation of several robots to perform some...... specified task. This calls for new strategies and methods which allow the desired system behavior to be specified in a formal and succinct way. Two different frameworks for the coordination and control of MRS have been investigated. Framework I - A network of robots is modeled as a network of multi...... a requirement specification in Computational Tree Logic (CTL) for a network of robots. The result is a set of motion plans for the robots which satisfy the specification. Framework II - A framework for controller synthesis for a single robot with respect to requirement specification in Linear-time Temporal...

Multi-echelon, multi-indenture spare parts inventory control subject to system availability and budget constraints

International Nuclear Information System (INIS)

Costantino, Francesco; Di Gravio, Giulio; Tronci, Massimo

2013-01-01

Inventory management of spare parts is one of the most critical issues in the aeronautical industry, given the required level of system availability related to the strategic importance and high stocking costs of the components. Even if a large number of spare parts increases warehousing costs, every single shortage have a greater impact: the adoption of best-in-class inventory management techniques becomes crucial. On these considerations, the paper presents an innovative model of spare parts allocation for the Italian Air Force with the aim of minimizing backorders and, at the same time, ensuring an availability of 99% depending on the actual flight plan. The model, solved by a marginal analysis, considers an original configuration of features combining different skills of maintenance centers in a hierarchical multi-echelon, multi-item, multi-indenture structure. A real case is provided in order to analyze the solving method and the results. -- Highlights: •We studied a problem of allocations for spare parts of aeronautical systems. •The model presents different repair capabilities of maintenance centers. •The model fits constraints on budget and on total operational availability. •The model is solved by a marginal analysis with a backorder/price ratio. •A numerical example shows a spare parts allocation with relative considerations

L{sup 1} group consensus of multi-agent systems with switching topologies and stochastic inputs

Energy Technology Data Exchange (ETDEWEB)

Shang, Yilun, E-mail: shylmath@hotmail.com [Institute for Cyber Security, University of Texas at San Antonio, TX 78249 (United States); SUTD-MIT International Design Center, Singapore University of Technology and Design, Singapore 138682 (Singapore)

2013-10-01

Understanding how interacting subsystems of an overall system lead to cluster/group consensus is a key issue in the investigation of multi-agent systems. In this Letter, we study the L{sup 1} group consensus problem of discrete-time multi-agent systems with external stochastic inputs. Based on ergodicity theory and matrix analysis, L{sup 1} group consensus criteria are obtained for multi-agent systems with switching topologies. Some numerical examples are provided to illustrate the effectiveness and feasibility of the theoretical results.

MULTI-RATER FEEDBACK - IN PROMOTING AND STIMULATING AN INSTITUTION OR ORGANISATION EMPLOYEES

Directory of Open Access Journals (Sweden)

LĂPĂDUŞI MIHAELA LOREDANA

2015-12-01

Full Text Available In order to improve the performance of employees of an institution, regardless of its profile method is applicable 360º Feedback. This is one of the most modern and current performance appraisal methods and motivating them to get professional results set. This is a system or process by which employees are aware of an anonymous feedbeck from some stakeholders of the organization. The method shows a high degree of objectivity and requires the acquisition of various assessments from a large number of assessors, both within the institution and outside it. By applying the method 360 may pursue the evaluation of any type of objective pursued by performance management is applied in particular to the improvement and development of employees an organization. The purpose of this article is to highlight the role, importance and advantages of this method can be successfully applied.

Multi-processor data acquisition and monitoring systems for particle physics

International Nuclear Information System (INIS)

White, V.; Burch, B.; Eng, K.; Heinicke, P.; Pyatetsky, M.; Ritchie, D.

1983-01-01

A high speed distributed processing system, using PDP-11 and VAX processors, is being developed at Fermilab. The acquisition of data is done using one or more PDP-11s. Additional processors are connected to provide either data logging or extra data analysis capabilities. Within this framework, functional interchangeability of PDP-11 and VAX processors and of the PDP-11 operating systems, RT-11 and RSX-11M, has been maintained. Inter-processor connections have been implemented in a general way using the 5 megabit DR11-W hardware currently selected for the purpose. Using this approach the authors have been able to make use of several existing data acquisition and analysis packages, such as RT/MULTI, in a multi-processor system

XML-based assembly visualization for a multi-CAD digital mock-up system

International Nuclear Information System (INIS)

Song, In Ho; Chung, Sung Chong

2007-01-01

Using a virtual assembly tool, engineers are able to design accurate and interference free parts without making physical mock-ups. Instead of a single CAD source, several CAD systems are used to design a complex product in a distributed design environment. In this paper, a multi-CAD assembly method is proposed through an XML and the lightweight CAD file. XML data contains a hierarchy of the multi-CAD assembly. The lightweight CAD file produced from various CAD files through the ACIS kemel and InterOp includes not only mesh and B-Rep data, but also topological data. It is used to visualize CAD data and to verify dimensions of the parts. The developed system is executed on desktop computers. It does not require commercial CAD systems to visualize 3D assembly data. Multi-CAD models have been assembled to verify the effectiveness of the developed DMU system on the Internet

Time-dependent density functional theory for multi-component systems

International Nuclear Information System (INIS)

Tiecheng Li; Peiqing Tong

1985-10-01

The Runge-Gross version of Hohenberg-Kohn-Sham's density functional theory is generalized to multi-component systems, both for arbitrary time-dependent pure states and for arbitrary time-dependent ensembles. (author)

Overcoming the Challenges of Implementing a Multi-Mission Distributed Workflow System

Science.gov (United States)

Sayfi, Elias; Cheng, Cecilia; Lee, Hyun; Patel, Rajesh; Takagi, Atsuya; Yu, Dan

2009-01-01

A multi-mission approach to solving the same problems for various projects is enticing. However, the multi-mission approach leads to the need to develop a configurable, adaptable and distributed system to meet unique project requirements. That, in turn, leads to a set of challenges varying from handling synchronization issues to coming up with a smart design that allows the "unknowns" to be decided later. This paper discusses the challenges that the Multi-mission Automated Task Invocation Subsystem (MATIS) team has come up against while designing the distributed workflow system, as well as elaborates on the solutions that were implemented. The first is to design an easily adaptable system that requires no code changes as a result of configuration changes. The number of formal deliveries is often limited because each delivery costs time and money. Changes such as the sequence of programs being called, a change of a parameter value in the program that is being automated should not result in code changes or redelivery.

Trends in Cyber-Physical Multi-Agent Systems. The PAAMS Collection - 15th International Conference

OpenAIRE

Fernando De la Prieta; Zita Vale; Luis Antunes; Tiago Pinto; Andrew T. Campbell; Vicente Julián; Antonio J.R. Neves; María N. Moreno

2017-01-01

PAAMS, the International Conference on Practical Applications of Agents and Multi-Agent Systems is an evolution of the International Workshop on Practical Applications of Agents and Multi-Agent Systems. PAAMS is an international yearly tribune to present, to discuss, and to disseminate the latest developments and the most important outcomes related to real-world applications. It provides a unique opportunity to bring multi-disciplinary experts, academics and practitioners together to exchange...

Predictive control for stochastic systems based on multi-layer probabilistic sets

Directory of Open Access Journals (Sweden)

Huaqing LIANG

2016-04-01

Full Text Available Aiming at a class of discrete-time stochastic systems with Markov jump features, the state-feedback predictive control problem under probabilistic constraints of input variables is researched. On the basis of the concept and method of the multi-layer probabilistic sets, the predictive controller design algorithm with the soft constraints of different probabilities is presented. Under the control of the multi-step feedback laws, the system state moves to different ellipses with specified probabilities. The stability of the system is guaranteed, the feasible region of the control problem is enlarged, and the system performance is improved. Finally, a simulation example is given to prove the effectiveness of the proposed method.

Development of a virtual private database for a multi-institutional internet-based radiation oncology database overcoming differences in protocols

International Nuclear Information System (INIS)

Harauchi, Hajime; Kondo, Takashi; Kumasaki, Yu

2002-01-01

A multi-institutional Radiation Oncology Greater Area Database (ROGAD) was started in 1991 under the direction of the Japanese Society for Therapeutic Radiology and Oncology (JASTRO). Use of ROGAD was intended to allow reflection of results of data analysis into treatment strategy and treatment planning for individual cases, to provide quality assurance, to maximize the efficacy of radiotherapy, to allow assessment of new technologies or new modalities, and to optimize medical decision making. ROGAD collected 13,448 radiotherapy treatment cases from 325 facilities during the period from 1992 to 2001. In 2000, questionnaires were sent to 725 radiotherapy facilities throughout Japan, to further obtain the situation of the radiation oncology database. Workers at 179 facilities replied that ''the protocol of my facility is different from ROGAD protocol and I must send data according to the ROGAD protocol''. So, we developed the Virtual Private Database System (VPDS) which is operated as if an oncologist had a database solely owned by his own facility, in spite of actually operating ROGAD. VPDS realizes integration of different plural databases, regardless of differences in entry methods, protocols, definitions and interpretations of contents of clinical data elements between facilities. (author)

Research on monitoring system of water resources in irrigation region based on multi-agent

International Nuclear Information System (INIS)

Zhao, T H; Wang, D S

2012-01-01

Irrigation agriculture is the basis of agriculture and rural economic development in China. Realizing the water resource information of irrigated area will make full use of existing water resource and increase benefit of irrigation agriculture greatly. However, the water resource information system of many irrigated areas in our country is not still very sound at present, it lead to the wasting of a lot of water resources. This paper has analyzed the existing water resource monitoring system of irrigated areas, introduced the Multi-Agent theories, and set up a water resource monitoring system of irrigated area based on multi-Agent. This system is composed of monitoring multi-Agent federal, telemetry multi-Agent federal, and the Communication Network GSM between them. It can make full use of good intelligence and communication coordination in the multi-Agent federation interior, improve the dynamic monitoring and controlling timeliness of water resource of irrigated area greatly, provide information service for the sustainable development of irrigated area, and lay a foundation for realizing high information of water resource of irrigated area.

High performance pseudo-analytical simulation of multi-object adaptive optics over multi-GPU systems

KAUST Repository

Abdelfattah, Ahmad; Gendron, É ric; Gratadour, Damien; Keyes, David E.; Ltaief, Hatem; Sevin, Arnaud; Vidal, Fabrice

2014-01-01

Multi-object adaptive optics (MOAO) is a novel adaptive optics (AO) technique dedicated to the special case of wide-field multi-object spectrographs (MOS). It applies dedicated wavefront corrections to numerous independent tiny patches spread over a large field of view (FOV). The control of each deformable mirror (DM) is done individually using a tomographic reconstruction of the phase based on measurements from a number of wavefront sensors (WFS) pointing at natural and artificial guide stars in the field. The output of this study helps the design of a new instrument called MOSAIC, a multi-object spectrograph proposed for the European Extremely Large Telescope (E-ELT). We have developed a novel hybrid pseudo-analytical simulation scheme that allows us to accurately simulate in detail the tomographic problem. The main challenge resides in the computation of the tomographic reconstructor, which involves pseudo-inversion of a large dense symmetric matrix. The pseudo-inverse is computed using an eigenvalue decomposition, based on the divide and conquer algorithm, on multicore systems with multi-GPUs. Thanks to a new symmetric matrix-vector product (SYMV) multi-GPU kernel, our overall implementation scores significant speedups over standard numerical libraries on multicore, like Intel MKL, and up to 60% speedups over the standard MAGMA implementation on 8 Kepler K20c GPUs. At 40,000 unknowns, this appears to be the largest-scale tomographic AO matrix solver submitted to computation, to date, to our knowledge and opens new research directions for extreme scale AO simulations. © 2014 Springer International Publishing Switzerland.

Collective Machine Learning: Team Learning and Classification in Multi-Agent Systems

Science.gov (United States)

Gifford, Christopher M.

2009-01-01

This dissertation focuses on the collaboration of multiple heterogeneous, intelligent agents (hardware or software) which collaborate to learn a task and are capable of sharing knowledge. The concept of collaborative learning in multi-agent and multi-robot systems is largely under studied, and represents an area where further research is needed to…

Anonymous voting for multi-dimensional CV quantum system

International Nuclear Information System (INIS)

Shi Rong-Hua; Xiao Yi; Shi Jin-Jing; Guo Ying; Lee, Moon-Ho

2016-01-01

We investigate the design of anonymous voting protocols, CV-based binary-valued ballot and CV-based multi-valued ballot with continuous variables (CV) in a multi-dimensional quantum cryptosystem to ensure the security of voting procedure and data privacy. The quantum entangled states are employed in the continuous variable quantum system to carry the voting information and assist information transmission, which takes the advantage of the GHZ-like states in terms of improving the utilization of quantum states by decreasing the number of required quantum states. It provides a potential approach to achieve the efficient quantum anonymous voting with high transmission security, especially in large-scale votes. (paper)

Introducing NASA's Solar System Exploration Research Virtual Institute

Science.gov (United States)

Pendleton, Yvonne

The Solar System Exploration Research Virtual Institute (SSERVI) is focused on the Moon, near Earth asteroids, and the moons of Mars. Comprised of competitively selected teams across the U.S., a growing number of international partnerships around the world, and a small central office located at NASA Ames Research Center, the institute advances collaborative research to bridge science and exploration goals. As a virtual institute, SSERVI brings unique skills and collaborative technologies for enhancing collaborative research between geographically disparate teams. SSERVI is jointly funded through the NASA Science Mission Directorate and the NASA Human Exploration and Operations Mission Directorate. Current U.S. teams include: Dr. Jennifer L. Heldmann, NASA Ames Research Center, Moffett Field, CA; Dr. William Farrell, NASA Goddard Space Flight Center, Greenbelt, MD; Prof. Carlé Pieters, Brown University, Providence, RI; Prof. Daniel Britt, University of Central Florida, Orlando, FL; Prof. Timothy Glotch, Stony Brook University, Stony Brook, NY; Dr. Mihaly Horanyi, University of Colorado, Boulder, CO; Dr. Ben Bussey, Johns Hopkins Univ. Applied Physics Laboratory, Laurel, MD; Dr. David A. Kring, Lunar and Planetary Institute, Houston, TX; and Dr. William Bottke, Southwest Research Institute, Boulder, CO. Interested in becoming part of SSERVI? SSERVI Cooperative Agreement Notice (CAN) awards are staggered every 2.5-3yrs, with award periods of five-years per team. SSERVI encourages those who wish to join the institute in the future to engage current teams and international partners regarding potential collaboration, and to participate in focus groups or current team activities now. Joining hand in hand with international partners is a winning strategy for raising the tide of Solar System science around the world. Non-U.S. science organizations can propose to become either Associate or Affiliate members on a no-exchange-of-funds basis. Current international partners

Multi-kilowatt modularized spacecraft power processing system development

International Nuclear Information System (INIS)

Andrews, R.E.; Hayden, J.H.; Hedges, R.T.; Rehmann, D.W.

1975-07-01

A review of existing information pertaining to spacecraft power processing systems and equipment was accomplished with a view towards applicability to the modularization of multi-kilowatt power processors. Power requirements for future spacecraft were determined from the NASA mission model-shuttle systems payload data study which provided the limits for modular power equipment capabilities. Three power processing systems were compared to evaluation criteria to select the system best suited for modularity. The shunt regulated direct energy transfer system was selected by this analysis for a conceptual design effort which produced equipment specifications, schematics, envelope drawings, and power module configurations

Probabilistic Approaches for Multi-Hazard Risk Assessment of Structures and Systems

Science.gov (United States)

Kwag, Shinyoung

Performance assessment of structures, systems, and components for multi-hazard scenarios has received significant attention in recent years. However, the concept of multi-hazard analysis is quite broad in nature and the focus of existing literature varies across a wide range of problems. In some cases, such studies focus on hazards that either occur simultaneously or are closely correlated with each other. For example, seismically induced flooding or seismically induced fires. In other cases, multi-hazard studies relate to hazards that are not dependent or correlated but have strong likelihood of occurrence at different times during the lifetime of a structure. The current approaches for risk assessment need enhancement to account for multi-hazard risks. It must be able to account for uncertainty propagation in a systems-level analysis, consider correlation among events or failure modes, and allow integration of newly available information from continually evolving simulation models, experimental observations, and field measurements. This dissertation presents a detailed study that proposes enhancements by incorporating Bayesian networks and Bayesian updating within a performance-based probabilistic framework. The performance-based framework allows propagation of risk as well as uncertainties in the risk estimates within a systems analysis. Unlike conventional risk assessment techniques such as a fault-tree analysis, a Bayesian network can account for statistical dependencies and correlations among events/hazards. The proposed approach is extended to develop a risk-informed framework for quantitative validation and verification of high fidelity system-level simulation tools. Validation of such simulations can be quite formidable within the context of a multi-hazard risk assessment in nuclear power plants. The efficiency of this approach lies in identification of critical events, components, and systems that contribute to the overall risk. Validation of any event or