[The features of high and low-frequency function of horizontal, semicircular canal in Meniere's disease].

Science.gov (United States)

Chen, Ying; Zhao, Zhongxin; Zhuang, Jianhua; Xie, Xuewei; Jin, Zhe; Li, Fei

2015-05-01

To analyze the feature of horizontal semicircular canal function at high and low-frequencies in Meniere's disease. Thirty patients suffering from unilateral Meniere's disease were included in the research from 2013 June to 2014 June. Caloric test and video head impulse test were performed to evaluate the high low-frequency function of horizontal semicircular canal. these patients were devided by the severity of unilateral weakness in caloric test. The gain value in video head impulse test, which reflects the high-frequency function of semicircular canal, were not different between the normal and mild abnormal group (P > 0.05), but were obviously different between the normal and mild-severe abnormal group, slight abnormal and mild-severe abnormal group (P frequency function of both side, has no difference between three groups (P > 0.05). A part of Meniere's disease may have normal high, low-frequency function of horizontal semicircular canal. As patient suffering slight injury of low-frequency function, the high-frequency function keeps normal. As the injury of low-frequency function become mildly to severely, the damage of high-frequency function appears, but the symmetry still keeps balance.

Incidence of dehiscence of the bony roof of the superior semicircular canal by CT imaging

International Nuclear Information System (INIS)

Watanabe, Akira

2003-01-01

Dehiscence of the bony roof of the superior semicircular canal (SSCC) is rare, but it has been recognized by otologists since Minor et al first described superior canal dehiscence syndrome (SCDS). In this study, dehiscence of the bony roof of SSCC was incidentally detected in three patients with benign paroxysmal positional vertigo out of 49 serial patients with vertigo and dizziness by multi-slice computed tomography. Although detection of dehiscence of the SSCC by ultra-high-resolution CT imaging of the temporal bones has been required for a diagnosis of SCDS, this study showed that dehiscence of the bony roof of the SSCC can be an incidental finding and therefore is not specific for SCDS. (author)

Mondini-like malformation mimicking otosclerosis and superior semicircular canal dehiscence.

Science.gov (United States)

Karlberg, M; Annertz, M; Magnusson, M

2006-05-01

In 2003, it was reported that superior semicircular canal dehiscence can mimic otosclerosis because of low-frequency bone conduction hearing gain and dissipation of air-conducted acoustic energy through the dehiscence. We report the case of a 17-year-old girl with left-sided combined hearing loss thought to be due to otosclerosis. Bone conduction thresholds were -10 dB at 250 and 500 Hz and she had a 40 dB air-bone gap at 250 Hz. When a tuning fork was placed at her ankle she heard it in her left ear. Acoustic reflexes and vestibular evoked myogenic potentials could be elicited bilaterally. Imaging of the temporal bones showed no otosclerosis, superior semicircular canal dehiscence or large vestibular aqueduct, but a left-sided, Mondini-like dysplasia of the cochlea with a modiolar deficiency could be seen. Mondini-like cochlear dysplasia should be added to the causes of inner-ear conductive hearing loss.

Qualitative analysis of the Dix-Hallpike maneuver in multi-canal BPPV using a biomechanical model: Introduction of an expanded Dix-Hallpike maneuver for enhanced diagnosis of multi-canal BPPV

Directory of Open Access Journals (Sweden)

Henri Traboulsi

2017-09-01

Conclusion: The Dix–Hallpike maneuver may cause simultaneous movement of otoliths present in multiple canals and create an obstacle to accurate diagnosis in multi-canal BPPV. An expanded Dix-Hallpike maneuver is described which adds intermediate steps with the head positioned to the right and left in the horizontal position before head-hanging. This expanded maneuver has helped to isolate affected semi-circular canals for individual assessment in multiple canal BPPV.

Persistent positional nystagmus: a case of superior semicircular canal benign paroxysmal positional vertigo?

Science.gov (United States)

Heidenreich, Katherine D; Kerber, Kevin A; Carender, Wendy J; Basura, Gregory J; Telian, Steven A

2011-08-01

Involvement of the superior semicircular canal (SSC) in benign paroxysmal positional vertigo (BPPV) is rare. SSC BPPV is distinguished from the more common posterior semicircular canal (PSC) variant by the pattern of nystagmus triggered by the Dix-Hallpike position: down-beating torsional nystagmus in SSC BPPV versus up-beating torsional nystagmus in PSC BPPV. SSC BPPV may be readily treated at the bedside, which is a key component in excluding central causes of down-beating nystagmus. We present an unusual video case report believed to represent refractory SSC BPPV based on the pattern of nystagmus and the absence of any other central signs. Copyright © 2011 The American Laryngological, Rhinological, and Otological Society, Inc.

CT and MR Imagings of Semicircular Canal Aplasia

Energy Technology Data Exchange (ETDEWEB)

Shin, Chung Hee; Hong, Hyun Sook; Yi, Beom Ha; Cha, Jang Gyu; Park, Seong Jin; Kim, Dae Ho; Lee, Hae Kyung; Kim, Shi Chan [Soonchunhyang University Bucheon Hospital, Bucheon (Korea, Republic of)

2009-07-15

To evaluate the clinical, CT and MR imaging findings of semicircular canal (SCC) aplasia and to evaluate if a correlation exists between these findings and the associated anomalies or syndromes. This study retrospectively reviewed the CT and MRI findings of five patients with SCC aplasia. The CT and MR findings were analyzed for SCC, direction of facial nerve canal, cochlea, vestibule, oval or round window, middle ear ossicles, and internal auditory canal (IAC). The subjects included three boys and two girls ranging in age from one to 120 months (mean age; 51 months). Four of the subjects had the CHARGE syndrome, and one had the Goldenhar syndrome. Moreover, four subjects had sensorineural hearing loss and one had combined hearing loss. The course of the facial nerve canal was abnormal in all five cases. Moreover, trapped cochlea and dysplastic modiolus were each observed in one case. Four subjects had atresia of the oval window; whereas ankylosis of the ossicles was present in three subjects. IAC stenosis was present in one patient with the CHARGE syndrome. The aberrant course of the facial nerve canal, atresia of the oval window, and abnormal ossicles were frequently associated in patients with SCC aplasia. In addition, the Goldenhar and CHARGE syndromes were also commonly associated syndromes.

A Comparison of Surgical Treatments for Superior Semicircular Canal Dehiscence: A Systematic Review

NARCIS (Netherlands)

Ziylan, F.; Kinaci, A.; Beynon, A.J.; Kunst, H.P.M.

2017-01-01

OBJECTIVE: We investigate the postoperative subjective and objective outcomes of different surgical treatments for superior semicircular canal dehiscence (SSCD): vestibular signs, auditory signs, vestibular evoked myogenic potential test, pure tone audiogram, speech audiogram, or

Single-channel L-type Ca2+ currents in chicken embryo semicircular canal type I and type II hair cells.

Science.gov (United States)

Zampini, Valeria; Valli, Paolo; Zucca, Giampiero; Masetto, Sergio

2006-08-01

Few data are available concerning single Ca channel properties in inner ear hair cells and particularly none in vestibular type I hair cells. By using the cell-attached configuration of the patch-clamp technique in combination with the semicircular canal crista slice preparation, we determined the elementary properties of voltage-dependent Ca channels in chicken embryo type I and type II hair cells. The pipette solutions included Bay K 8644. With 70 mM Ba(2+) in the patch pipette, Ca channel activity appeared as very brief openings at -60 mV. Ca channel properties were found to be similar in type I and type II hair cells; therefore data were pooled. The mean inward current amplitude was -1.3 +/- 0.1 (SD) pA at - 30 mV (n = 16). The average slope conductance was 21 pS (n = 20). With 5 mM Ba(2+) in the patch pipette, very brief openings were already detectable at -80 mV. The mean inward current amplitude was -0.7 +/- 0.2 pA at -40 mV (n = 9). The average slope conductance was 11 pS (n = 9). The mean open time and the open probability increased significantly with depolarization. Ca channel activity was still present and unaffected when omega-agatoxin IVA (2 microM) and omega-conotoxin GVIA (3.2 microM) were added to the pipette solution. Our results show that types I and II hair cells express L-type Ca channels with similar properties. Moreover, they suggest that in vivo Ca(2+) influx might occur at membrane voltages more negative than -60 mV.

Vestibular Dysfunction in Wernicke’s Encephalopathy: Predominant Impairment of the Horizontal Semicircular Canals

Directory of Open Access Journals (Sweden)

Seung-Han Lee

2018-03-01

Full Text Available BackgroundWernicke’s encephalopathy (WE, a metabolic disorder due to thiamine deficiency, manifests with various neurological symptoms and signs. It has been known as a cause of vestibular dysfunction. Preliminary reports have proposed predominant involvement of the horizontal semicircular canals (HSCs.ObjectiveTo better characterize the pattern of vestibular impairment in patients with WE using quantitative video head-impulse testing and to review the literature regarding this topic.MethodFrom January 2014 to December 2016, we retrospectively enrolled five cases of WE that received quantitative video-head-impulse testing (vHIT. We retrieved the clinical features from the medical records and reviewed quantitative head-impulse testing (qHIT and caloric irrigation. Based on the gain and the number of corrective saccades, the function (normal vs. impaired of each semicircular canal was rated. In addition, we conducted a MEDLINE and EMBASE search to identify other published cases of WE that had received qHIT. Neuro-otologic and neuro-ophthalmologic findings and vestibular testing results were extracted.ResultsA total of 17 patients (own series = 5; published cases = 12 aged 54.6 ± 11 years were included. Key neurologic findings were ataxia of stance and gait (13/13, 100%, spontaneous nystagmus (7/14, 50%, gaze-evoked nystagmus (GEN (17/17, 100%, positive bedside head-impulse testing for the horizontal canals (16/17, 94%, and memory impairment and mental changes (6/11, 54.5%. Regarding vestibular testing, qHIT (either video based or search-coil based documented selective bilateral horizontal canal dysfunction with normal or minimal vertical canal impairment (14/14, 100%. On caloric irrigation, bilateral horizontal canal paresis was noted in most cases (10/11, 91%.ConclusionIn WE, signs of both peripheral and central vestibular dysfunction (i.e., GEN, ataxia of stance and gait, abnormal head-impulse testing were common. Selective or

Changes of ampulla pressure in the semicircular canal of pigeons by caloric stimulation

Science.gov (United States)

Wada, Yoshiro; Suzuki, Hiroyuki; Watanabe, Satoru

Still now several hypotheses about the mechanisms of the caloric nystagmus have been in conclusive. In this study we confirmed the convection effect and the volume change effect of the endolymph in horizontal semicircular canal following the caloric stimulation using pigeons ( Columba livia). Although the direction of the caloric nystagmus depended on the head position and the stimulus site of calorization, the caloric nystagmus disappeared after plugging of horizontal semicircular canal. On the other hand, the ampulla pressure increased by cold calorization and decreased by hot calorization and these pressure changes had no relation to the head position. These results show that the main role of the mechanisms of the caloric nystagmus under 1G is the convection effect but the volume change effect may act on the caloric nystagmus not only under 1G but also under microgravity.

Gyroscopic stimulation of the semicircular canals during sensory deprivation.

Science.gov (United States)

Newsom, B. D.; Brady, J. F.; Stumm, J. E.

1971-01-01

A static object revolving at a constant velocity is stationary with respect to that environment. When the object is rotated outside the plane of spin, a gyroscopic or cross-coupled acceleration is produced orthogonal to the two planes of rotation. In this situation, a man feels himself moving in a direction other than that which his visual or proprioceptive sensors perceive. The conflict in spatial orientation is the cross-coupled acceleration imposed on the semicircular canals. This perceptual conflict and the thresholds involved were studied by partial isolation of the physiological stimuli through sensory deprivation. Subjects weighted to neutral buoyancy were submerged in 94 F water in the dark. The subjects were then rotated while being revolved about a displaced axis. Thresholds for detection of angular acceleration were higher than those reported in the literature for detection of acceleration of a single plane. This discrepancy may be attributable to the length of time the stimuli are imposed to each of the canals and the cupular response periods.

Ca(2+) currents and voltage responses in Type I and Type II hair cells of the chick embryo semicircular canal.

Science.gov (United States)

Masetto, Sergio; Zampini, Valeria; Zucca, Giampiero; Valli, Paolo

2005-11-01

Type I and Type II hair cells, and Type II hair cells located in different zones of the semicircular canal crista, express different patterns of voltage-dependent K channels, each one specifically shaping the hair cell receptor potential. We report here that, close to hatching, chicken embryo semicircular canal Type I and Type II hair cells express a similar voltage-dependent L-type calcium current (I(Ca)), whose main features are: activation above -60 mV, fast activation kinetics, and scarce inactivation. I(Ca) should be already active at rest in Zone 1 Type II hair cells, whose resting membrane potential was on average slightly less negative than -60 mV. Conversely, I(Ca) would not be active at rest in Type II hair cells from Zone 2 and 3, nor in Type I hair cells, since their resting membrane potential was significantly more negative than -60 mV. However, even small depolarising currents would activate I(Ca) steadily in Zone 2 and 3 Type II hair cells, but not in Type I hair cells because of the robust repolarising action of their specific array of K(+) currents. The implications of the present findings in the afferent discharge are discussed.

Functional recovery of anterior semicircular canal afferents following hair cell regeneration in birds

Science.gov (United States)

Boyle, Richard; Highstein, Stephen M.; Carey, John P.; Xu, Jinping

2002-01-01

Streptomycin sulfate (1.2 g/kg i.m.) was administered for 5 consecutive days to 5-7-day-old white Leghorn chicks; this causes damage to semicircular canal hair cells that ultimately regenerate to reform the sensory epithelium. During the recovery period, electrophysiological recordings were taken sequentially from anterior semicircular canal primary afferents using an indentation stimulus of the canal that has been shown to mimic rotational stimulation. Chicks were assigned to an early (14-18 days; n = 8), intermediate (28-34 days; n = 5), and late (38-58 days; n = 4) period based on days after treatment. Seven untreated chicks, 15-67 days old, provided control data. An absence of background and indent-induced discharge was the prominent feature of afferents in the early period: only "silent" afferents were encountered in 5/8 experiments. In several of these chicks, fascicles of afferent fibers were seen extending up to the epithelium that was void of hair cells, and intra- and extracellular biocytin labeling revealed afferent processes penetrating into the supporting cell layer of the crista. In 3/8 chicks 74 afferents could be characterized, and they significantly differed from controls (n = 130) by having a lower discharge rate and a negligible response to canal stimulation. In the intermediate period there was considerable variability in discharge properties of 121 afferents, but as a whole the number of "silent" fibers in the canal nerve diminished, the background rate increased, and a response to canal stimulation detected. Individually biocytin-labeled afferents had normal-appearing terminal specializations in the sensory epithelium by 28 days poststreptomycin. In the late period, afferents (n = 58) remained significantly different from controls in background discharge properties and response gain. The evidence suggests that a considerable amount of variability exists between chicks in the return of vestibular afferent function following ototoxic injury and

Semicircular canals circumvent Brownian Motion overload of mechanoreceptor hair cells

DEFF Research Database (Denmark)

Muller, Mees; Heeck, Kier; Elemans, Coen P H

2016-01-01

Vertebrate semicircular canals (SCC) first appeared in the vertebrates (i.e. ancestral fish) over 600 million years ago. In SCC the principal mechanoreceptors are hair cells, which as compared to cochlear hair cells are distinctly longer (70 vs. 7 μm), 10 times more compliant to bending (44 vs. 500...... nN/m), and have a 100-fold higher tip displacement threshold (hair cells where the bundle is approximated as a stiff, cylindrical elastic rod subject to friction and thermal agitation. Our models suggest that the above...... differences aid SCC hair cells in circumventing the masking effects of Brownian motion noise of about 70 nm, and thereby permit transduction of very low frequency (

[Objective characteristics of nystagmus in horizontal semicircular canal benign paroxysmal positional vertigo].

Science.gov (United States)

Chen, Fei-yun; Chen, Tai-sheng; Wen, Chao; Li, Shan-shan; Lin, Peng; Zhao, Hui; Liu, Qiang

2013-08-01

To discuss the objective characteristics and mechanism of nystagmus direction, intensity and time in horizontal semicircular canal benign paroxysmal positional vertigo (HSC-BPPV) . A total of 233 patients with HSC-BPPV, whereas 179 horizontal semicircular canalithasis (HSC-Can) and 54 horizontal semicircular cupulolithiasis (HSC-Cup) were involved respectively. The induced nystagmus in roll tests recorded by video-nystagmograph(VNG) , whose direction, intensity and time characteristics were compared in various BPPV. Horizontal nystagmus was both induced by turning left or right in HSC-BPPV roll tests. The direction of the induced nystagmus was the same with turning in HSC-Can. The latency, duration time and intensity ([AKx(-)D] ± s) turning to lesion and normal side were (1.922 ± 1.501)s and (1.447 ± 0.855)s, (25.620 ± 10.409)s, and (22.110 ± 10.931)s, (56.441 ± 33.168)°/s and (24.239 ± 13.892) °/s in HSC-Can. The latency, duration time and intensity turning to lesion side were larger than normal side (t = 3.715, 15.219 and 4.070, P 0.05). The induced nystagmus intensity of head to two sides in roll tests for HSC-BPPV both follow Ewald's law, and the ratio between stronger and weaker are both 2: 1. These nystagmus parameters of VNG in roll tests are an objective guideline for BPPV diagnosis.

Development of conductive hearing loss due to posterior semicircular canal dehiscence.

Science.gov (United States)

Kubota, Marie; Kubo, Kazuhiko; Yasui, Tetsuro; Matsumoto, Nozomu; Komune, Shizuo

2015-06-01

We herein report a case of posterior semicircular canal dehiscence (SCD) syndrome who had been audiologically followed up for eight years. The patient originally had sensorineural hearing loss. The audiogram had gradually transformed to pure conductive hearing loss. The posterior SCD was identified in CT scan. The reported case showed the possibility to distinguish the mechanism at play underlying the typical conductive hearing loss in SCD patients by tracing the transition of the hearing loss pattern. This information is of much help to predict the hearing outcomes if surgical intervention were chosen for the treatment. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Prevalence of radiographic semicircular canal dehiscence in very young children: an evaluation using high-resolution computed tomography of the temporal bones

International Nuclear Information System (INIS)

Hagiwara, Mari; Fatterpekar, Girish; Shaikh, Jamil A.; Fang, Yixin; Roehm, Pamela C.

2012-01-01

Previous studies suggest that semicircular canal dehiscences (SCDs) have a developmental origin. We hypothesized that if SCDs originate during development, incidence of radiographic SCDs in young children will be higher than in adults. Thirty-four temporal bone HRCTs of children younger than 2 years and 40 temporal bone HRCTs of patients older than 18 years were reformatted and re-evaluated for presence of SCD or canal thinning. Results were compared with indications for HRCT and clinical information. SCDs were detected in 27.3% of children younger than 2 years of age (superior, 13.8%; posterior, 20%) and in 3% of adults (P < 0.004). Of children with one radiographic dehiscence, 55.6% had multiple and 44% had bilateral SCDs on HRCT. No lateral canal SCDs were present. Thinning of bone overlying the semicircular canals was found in 44% of children younger than 2 years and 2.5% of adults (P < 0.0001). SCDs are more common on HRCTs of very young children. This supports the hypothesis that SCDs originate from discontinuation of bone deposition/maturation. However, SCDs on imaging do not necessarily correlate with canal dehiscence syndrome and should therefore be interpreted carefully. (orig.)

Prevalence of radiographic semicircular canal dehiscence in very young children: an evaluation using high-resolution computed tomography of the temporal bones

Energy Technology Data Exchange (ETDEWEB)

Hagiwara, Mari; Fatterpekar, Girish [New York University School of Medicine, Department of Radiology, New York, NY (United States); Shaikh, Jamil A. [New York University School of Medicine, Department of Otolaryngology, New York, NY (United States); Fang, Yixin [New York University School of Medicine, Department of Otolaryngology, New York, NY (United States); New York University School of Medicine, Division of Biostatistics, Department of Environmental Medicine, New York, NY (United States); Roehm, Pamela C. [New York University School of Medicine, Department of Otolaryngology, New York, NY (United States); New York University School of Medicine, Department of Otolaryngology, Division of Otology/Neurotology, New York, NY (United States)

2012-12-15

Previous studies suggest that semicircular canal dehiscences (SCDs) have a developmental origin. We hypothesized that if SCDs originate during development, incidence of radiographic SCDs in young children will be higher than in adults. Thirty-four temporal bone HRCTs of children younger than 2 years and 40 temporal bone HRCTs of patients older than 18 years were reformatted and re-evaluated for presence of SCD or canal thinning. Results were compared with indications for HRCT and clinical information. SCDs were detected in 27.3% of children younger than 2 years of age (superior, 13.8%; posterior, 20%) and in 3% of adults (P < 0.004). Of children with one radiographic dehiscence, 55.6% had multiple and 44% had bilateral SCDs on HRCT. No lateral canal SCDs were present. Thinning of bone overlying the semicircular canals was found in 44% of children younger than 2 years and 2.5% of adults (P < 0.0001). SCDs are more common on HRCTs of very young children. This supports the hypothesis that SCDs originate from discontinuation of bone deposition/maturation. However, SCDs on imaging do not necessarily correlate with canal dehiscence syndrome and should therefore be interpreted carefully. (orig.)

Influencia de la edad y la menopausia en el origen de la Dehiscencia del Canal Semicircular Superior

OpenAIRE

Fernández Castaño, Carmen

2014-01-01

145 p. : il., col. La dehiscencia del canal semicircular superior (DCSS) es una forma de vestibulopatía periférica caracterizada por la ausencia de cobertura ósea en el techo de dicho canal, de este modo su luz interior queda anormalmente abierta al espacio intracraneal en contacto directo con la meninge que tapiza el suelo de la fosa media. Esta dehiscencia se limitaría a la cápsula ótica y no afectaría, aparentemente, al laberinto membranoso. Su presentación clínica es variable, siendo ...

The Effect of Superior Semicircular Canal Dehiscence on Intracochlear Sound Pressures

Science.gov (United States)

Nakajima, Hideko Heidi; Pisano, Dominic V.; Merchant, Saumil N.; Rosowski, John J.

2011-11-01

Semicircular canal dehiscence (SCD) is a pathological opening in the bony wall of the inner ear that can result in conductive hearing loss. The hearing loss is variable across patients, and the precise mechanism and source of variability is not fully understood. We use intracochlear sound pressure measurements in cadaveric preparations to study the effects of SCD size. Simultaneous measurement of basal intracochlear sound pressures in scala vestibuli (SV) and scala tympani (ST) quantifies the complex differential pressure across the cochlear partition, the stimulus that excites the partition. Sound-induced pressures in SV and ST, as well as stapes velocity and ear-canal pressure are measured simultaneously for various sizes of SCD followed by SCD patching. At low frequencies (<600 Hz) our results show that SCD decreases the pressure in both SV and ST, as well as differential pressure, and these effects become more pronounced as dehiscence size is increased. For frequencies above 1 kHz, the smallest pinpoint dehiscence can have the larger effect on the differential pressure in some ears. These effects due to SCD are reversible by patching the dehiscence.

Preserved otolith organ function in caspase-3-deficient mice with impaired horizontal semicircular canal function.

Science.gov (United States)

Armstrong, Patrick A; Wood, Scott J; Shimizu, Naoki; Kuster, Kael; Perachio, Adrian; Makishima, Tomoko

2015-06-01

Genetically engineered mice are valuable models for elucidation of auditory and vestibular pathology. Our goal was to establish a comprehensive vestibular function testing system in mice using: (1) horizontal angular vestibulo-ocular reflex (hVOR) to evaluate semicircular canal function and (2) otolith-ocular reflex (OOR) to evaluate otolith organ function and to validate the system by characterizing mice with vestibular dysfunction. We used pseudo off-vertical axis rotation to induce an otolith-only stimulus using a custom-made centrifuge. For the OOR, horizontal slow-phase eye velocity and vertical eye position were evaluated as a function of acceleration. Using this system, we characterized hVOR and OOR in the caspase-3 (Casp3) mutant mice. Casp3 (-/-) mice had severely impaired hVOR gain, while Casp3 (+/-) mice had an intermediate response compared to WT mice. Evaluation of OOR revealed that at low-to-mid frequencies and stimulus intensity, Casp3 mutants and WT mice had similar responses. At higher frequencies and stimulus intensity, the Casp3 mutants displayed mildly reduced otolith organ-related responses. These findings suggest that the Casp3 gene is important for the proper function of the semicircular canals but less important for the otolith organ function.

Preserved otolith organ function in caspase-3 deficient mice with impaired horizontal semicircular canal function

Science.gov (United States)

Armstrong, Patrick A; Wood, Scott J; Shimizu, Naoki; Kuster, Kael; Perachio, Adrian; Makishima, Tomoko

2015-01-01

Genetically engineered mice are valuable models for elucidation of auditory and vestibular pathology. Our goal was to establish a comprehensive vestibular function testing system in mice using: 1) horizontal angular vestibular-ocular reflex (hVOR) to evaluate semicircular canal function, and 2) otolith-ocular reflex (OOR) to evaluate otolith organ function, and to validate the system by characterizing mice with vestibular dysfunction. We used pseudo-off vertical axis rotation (pOVAR) to induce an otolith-only stimulus using a custom-made centrifuge. For the OOR, horizontal slow phase eye velocity (HEV) and vertical eye position (VEP) was evaluated as a function of acceleration. Using this system, we characterized hVOR and OOR in the caspase-3 (Casp3) mutant mice. Casp3 −/− mice had severely impaired hVOR gain, while Casp3 +/− mice had an intermediate response compared to WT mice. Evaluation of OOR revealed that at low to mid frequencies and stimulus intensity, Casp3 mutants and WT mice had similar responses. At higher frequencies and stimulus intensity, the Casp3 mutants displayed mildly reduced otolith organ related responses. These findings suggest that the Casp3 gene is important for the proper function of the semicircular canals but less important for the otolith organ function. PMID:25827332

The Human Semicircular Canals Orientation Is More Similar to the Bonobos than to the Chimpanzees

Science.gov (United States)

El Khoury, Marwan; Braga, José; Dumoncel, Jean; Nancy, Javotte; Esclassan, Remi; Vaysse, Frederic

2014-01-01

For some traits, the human genome is more closely related to either the bonobo or the chimpanzee genome than they are to each other. Therefore, it becomes crucial to understand whether and how morphostructural differences between humans, chimpanzees and bonobos reflect the well known phylogeny. Here we comparatively investigated intra and extra labyrinthine semicircular canals orientation using 260 computed tomography scans of extant humans (Homo sapiens), bonobos (Pan paniscus) and chimpanzees (Pan troglodytes). Humans and bonobos proved more similarities between themselves than with chimpanzees. This finding did not fit with the well established chimpanzee – bonobo monophyly. One hypothesis was convergent evolution in which bonobos and humans produce independently similar phenotypes possibly in response to similar selective pressures that may be associated with postural adaptations. Another possibility was convergence following a “random walk” (Brownian motion) evolutionary model. A more parsimonious explanation was that the bonobo-human labyrinthine shared morphology more closely retained the ancestral condition with chimpanzees being subsequently derived. Finally, these results might be a consequence of genetic diversity and incomplete lineage sorting. The remarkable symmetry of the Semicircular Canals was the second major finding of this article with possible applications in taphonomy. It has the potential to investigate altered fossils, inferring the probability of post-mortem deformation which can lead to difficulties in understanding taxonomic variation, phylogenetic relationships, and functional morphology. PMID:24710502

The human semicircular canals orientation is more similar to the bonobos than to the chimpanzees.

Directory of Open Access Journals (Sweden)

Marwan El Khoury

Full Text Available For some traits, the human genome is more closely related to either the bonobo or the chimpanzee genome than they are to each other. Therefore, it becomes crucial to understand whether and how morphostructural differences between humans, chimpanzees and bonobos reflect the well known phylogeny. Here we comparatively investigated intra and extra labyrinthine semicircular canals orientation using 260 computed tomography scans of extant humans (Homo sapiens, bonobos (Pan paniscus and chimpanzees (Pan troglodytes. Humans and bonobos proved more similarities between themselves than with chimpanzees. This finding did not fit with the well established chimpanzee - bonobo monophyly. One hypothesis was convergent evolution in which bonobos and humans produce independently similar phenotypes possibly in response to similar selective pressures that may be associated with postural adaptations. Another possibility was convergence following a "random walk" (Brownian motion evolutionary model. A more parsimonious explanation was that the bonobo-human labyrinthine shared morphology more closely retained the ancestral condition with chimpanzees being subsequently derived. Finally, these results might be a consequence of genetic diversity and incomplete lineage sorting. The remarkable symmetry of the Semicircular Canals was the second major finding of this article with possible applications in taphonomy. It has the potential to investigate altered fossils, inferring the probability of post-mortem deformation which can lead to difficulties in understanding taxonomic variation, phylogenetic relationships, and functional morphology.

Histamine H1 receptors are expressed in mouse and frog semicircular canal sensory epithelia.

Science.gov (United States)

Botta, Laura; Tritto, Simona; Perin, Paola; Laforenza, Umberto; Gastaldi, Giulia; Zampini, Valeria; Zucca, Gianpiero; Valli, Stefano; Masetto, Sergio; Valli, Paolo

2008-03-05

Histamine-related drugs are commonly used in the treatment of vertigo and related vestibular disorders. Their site and mechanism of action, however, are still poorly understood. To increase our knowledge of the histaminergic system in the vestibular organs, we have investigated the expression of H1 and H3 histamine receptors in the frog and mouse semicircular canal sensory epithelia. Analysis was performed by mRNA reverse transcriptase-PCR, immunoblotting and immunocytochemistry experiments. Our data show that both frog and mouse vestibular epithelia express H1 receptors. Conversely no clear evidence for H3 receptors expression was found.

Anterior semicircular canal benign paroxysmal positional vertigo and positional downbeating nystagmus.

Science.gov (United States)

Lopez-Escamez, Jose A; Molina, Maria I; Gamiz, Maria J

2006-01-01

The aim of this study was to describe the clinical features and video-oculographic findings in patients with anterior semicircular canal benign paroxysmal positional vertigo (BPPV). This is a prospective case series. The study was set at an outpatient clinic in a general hospital. Fourteen individuals with symptoms of BPPV and positional downbeating nystagmus (pDBN) were included in the study. The diagnosis was based on a history of brief episodes of vertigo and the presence of pDBN confirmed in the video-oculographic examination during Dix-Hallpike test (DH) or head-hanging maneuver. Patients were treated by particle repositioning maneuver and the effectiveness was evaluated at 7, 30, and 180 days posttreatment. The treatment was repeated up to 4 times if pDBN was persistent. The main outcome measure is the number of patients without pDBN at 30 and 180 days. Video-oculography showed a predominant pDBN in response to DH. Of the 14 patients, 7 had arterial hypertension, and 5 of 14 cases presented abnormalities on the caloric test. Horizontal spontaneous nystagmus was found in 3 of 14 individuals. Positional nystagmus at different positional test was observed in 5 of 14 individuals, suggesting the involvement of several canals. Of the 14 patients, 10 (71%) did not present vertigo, and the positional tests were negative at 30 days. However, 3 cases presented a positive DH with persistence of BPPV episodes and pDBN at 30 days, and another developed a contralateral posterior canal affectation. One of the patients maintained a persistent pDBN at 180 days despite the repeated maneuvers. Video-oculography demonstrates that anterior canal BPPV is characterized by a predominant downbeating nystagmus in response to DH. These individuals may show alterations in the vestibular caloric, and they can have multicanal affectation.

Síndrome de Deiscência de Canal Semicircular Superior Superior Canal Dehiscence Syndrome

Directory of Open Access Journals (Sweden)

Suzane da Cunha Ferreira

2006-06-01

Full Text Available A Síndrome de Deiscência de Canal Semicircular Superior (SDCSS, primeiramente descrita em 1998 por Minor et al., caracteriza-se por vertigem associada à presença de nistagmo, relacionados à exposição a estímulos sonoros intensos ou a modificações de pressão dentro da orelha média ou intracraniana. Disacusia, em sua maioria de padrão condutivo à audiometria tonal, também pode estar presente. Nesta revisão da literatura objetivou-se abordar a SDCSS, com seus principais sinais e sintomas, achados diagnósticos e tratamento, assim como enfatizar a importância de sua inclusão dentre as causas de vertigem, visto tratar-se de acometimento ainda pouco conhecido até mesmo entre especialistas. O diagnóstico correto, além de possibilitar seu tratamento, impede que abordagens diagnósticas e terapêuticas inapropriadas sejam realizadas.The Superior Canal Dehiscence Syndrome (SCDS was first reported by Minor at. Al. (1998, and has been characterized by vertigo and vertical-torsional eye movements related to loud sounds or stimuli that change middle ear or intracranial pressure. Hearing loss, for the most part with conductive patterns on audiometry, may be present in this syndrome. We performed a literature survey in order to to present symptoms, signs, diagnostic and therapeutic approaches to the SCDS, also aiming at stressing the great importance of including this syndrome among the tractable cause of vertigo. We should emphasize that this is a recent issue, still unknown by some specialists. The Correct SCDS diagnosis, besides enabling patient treatment, precludes misdiagnosis and inadequate therapeutic approaches.

Vestibular ablation and a semicircular canal prosthesis affect postural stability during head turns

Science.gov (United States)

Thompson, Lara A.; Haburcakova, Csilla; Lewis, Richard F.

2016-01-01

In our study, we examined postural stability during head turns for two rhesus monkeys: one, single animal study contrasted normal and mild bilateral vestibular ablation and a second animal study contrasted severe bilateral vestibular ablation with and without prosthetic stimulation. The monkeys freely stood, unrestrained on a balance platform and made voluntary head turns between visual targets. To quantify each animals’ posture, motions of the head and trunk, as well as torque about the body’s center-of-mass, were measured. In the mildly ablated animal, we observed less foretrunk sway in comparison to the normal state. When the canal prosthesis provided electric stimulation to the severely ablated animal, it showed a decrease in trunk sway during head turns. Because the rhesus monkey with severe bilateral vestibular loss exhibited a decrease in trunk sway when receiving vestibular prosthetic stimulation, we propose that the prosthetic electrical stimulation partially restored head velocity information. Our results provide an indication that a semicircular canal prosthesis may be an effective way to improve postural stability in patients with severe peripheral vestibular dysfunction. PMID:27405997

Controle postural na síndrome de Pusher: influência dos canais semicirculares laterais Posture control in Pusher syndrome: influence of lateral semicircular canals

Directory of Open Access Journals (Sweden)

Taiza Elaine Grespan dos Santos Pontelli

2005-08-01

Full Text Available A síndrome de Pusher caracteriza-se por uma alteração do equilíbrio na qual pacientes com lesões encefálicas empurram-se em direção ao lado parético utilizando o membro não-afetado. O papel do sistema vestibular na alteração postural da síndrome de Pusher ainda não foi devidamente elucidado. OBJETIVO: Neste estudo objetivamos avaliar o papel dos canais semicirculares horizontais na expressão clínica da síndrome de Pusher, através da aplicação das provas calórica e rotatória. FORMA DE ESTUDO: Observacional, clínico e prospectivo. MATERIAL E MÉTODO: Avaliamos 9 pacientes com AVC e síndrome de Pusher internados na Enfermaria de Neurologia do HCFMRP-USP. Os pacientes foram submetidos à avaliação neurológica clínica e neuropsicológica, NIHSS, Scale for Contraversive Pushing - SCP, teste calórico e teste rotatório. RESULTADOS: Foram estudados 9 pacientes (5 homens com idade média de 71,8 ± 5,9 anos e com NIHSS médio de 18.33. Três pacientes apresentaram preponderância direcional contralateral à lesão encefálica na prova calórica. Na prova rotatória, foram observados quatro pacientes com preponderância direcional na análise de velocidade da componente lenta. CONCLUSÃO: Os resultados do presente estudo indicam que a disfunção dos canais semicirculares não parece ser fundamental para a expressão da síndrome de Pusher.Pusher syndrome is an interesting disorder of balance in patients with encephalic lesions characterized by the peculiar behavior of actively pushing away from the non-hemiparetic side and resisting against passive correction, with a tendency to fall toward the paralyzed side. The role of vestibular system on the pushing behavior is not clear. AIM: To evaluate horizontal semicircular canal function in patients with Pusher syndrome, using caloric and rotation tests. STUDY DESIGN: Observational prospective. MATERIAL AND METHOD: We evaluated 9 inpatients with stroke and Pusher syndrome at the

Canal switch after canalith repositioning procedure for benign paroxysmal positional vertigo.

Science.gov (United States)

Lin, Giant C; Basura, Gregory J; Wong, Hiu Tung; Heidenreich, Katherine D

2012-09-01

Canal switch is a complication following canalith repositioning procedure (CRP) for posterior canal benign paroxysmal positional vertigo (BPPV). Instead of being returned to the utricle, the loose otoconia migrate into the superior or horizontal semicircular canal. Patients remain symptomatic, and treatment can be ineffective unless the switch is recognized and additional repositioning maneuvers directed toward the appropriate semicircular canal are performed. This report provides the first videographic documentation of canal switch involving conversion of unilateral posterior semicircular canal BPPV to geotropic horizontal canalithiasis. Copyright © 2012 The American Laryngological, Rhinological, and Otological Society, Inc.

Superior Canal Dehiscence Syndrome: Lessons from the First 20 Years

Directory of Open Access Journals (Sweden)

Bryan K. Ward

2017-04-01

Full Text Available Superior semicircular canal dehiscence syndrome was first reported by Lloyd Minor and colleagues in 1998. Patients with a dehiscence in the bone overlying the superior semicircular canal experience symptoms of pressure or sound-induced vertigo, bone conduction hyperacusis, and pulsatile tinnitus. The initial series of patients were diagnosed based on common symptoms, a physical examination finding of eye movements in the plane of the superior semicircular canal when ear canal pressure or loud tones were applied to the ear, and high-resolution computed tomography imaging demonstrating a dehiscence in the bone over the superior semicircular canal. Research productivity directed at understanding better methods for diagnosing and treating this condition has substantially increased over the last two decades. We now have a sound understanding of the pathophysiology of third mobile window syndromes, higher resolution imaging protocols, and several sensitive and specific diagnostic tests. Furthermore, we have a treatment (surgical occlusion of the superior semicircular canal that has demonstrated efficacy. This review will highlight some of the fundamental insights gained in SCDS, propose diagnostic criteria, and discuss future research directions.

[Clinical research of the otolith abnormal migration during canalith repositioning procedures for posterior semicircular canal benign paroxysmal positional vertigo].

Science.gov (United States)

Ou, Yongkang; Zheng, Yiging; Zhu, Honglei; Chen, Ling; Zhong, Junwei; Tang, Xiaowu; Huang, Qiuhong; Xu, Yaodong

2015-01-01

To investigate the risk factor,type and characteristic nystagmus of the otolith abnormal migration during diagnosis and treatment for posterior semicircular canal benign paroxysmal positional vertigo (PSC-BPPV). The therapy and prevention is also discussed. Four hundred and seventy-nine patients with PSC-BPPV were treated by Epley's canalith repositioning procedures(CRP) from March 2009 to March 2012. We observed otolith abnormal migration complicating during diagnosis and treatment. According the type of otolith abnormal migration, the additional repositioning maneuver was performed. The rate of complication was 8. 1%(39/479), with canal conversion in 5.4%(26/479) and primarily canal reentry in 2.7%(13/479). The rate of incidence of conversion to horizontal canal conversion and anterior canal were 4. 8%(23/479)and 0. 6%(3/479) respectively. All the patient was cured in follow up. The risk factors were unappropriated head movement during or after CRP, including another Dix-Hallpike were performed immediately. To prevent the complications,the pathognostic positioning sequence and angle of head rotation are commenced during CRP. Appropriate short time postural restrictions post-treatment is necessary. Careful observation of nystagrnus variation is crucial to determine the otolith abnormal migration.

The induction and compensation of asymmetric eye movements following unilateral blockage of a horizontal semicircular canal in the rabbit.

Science.gov (United States)

Barmack, N H; Pettorossi, V E

1988-08-01

The influence of unilateral plugs of the left horizontal semicircular canal (LHC plugs) of rabbits on the development and compensation of asymmetric eye movements evoked by horizontal vestibular stimulation was studied. LHC plugs caused an immediate reduction of 50-65% in the gain of the horizontal vestibuloocular reflex (HVOR). This reduction in gain was achieved without altering the symmetry of the HVOR, and was accompanied by a change in the axial alignment of eye movements evoked by vestibular stimulation about the vertical (HVOR) and longitudinal (VVOR) axes. Postoperative asymmetry of eye movements developed 12-48 hr after the plugging operation. The development of asymmetry was reduced if the rabbit was restrained for 24 hr, thereby minimizing vestibular stimulation following the plugging operation. Over a 3-4 week period, the normal symmetry of eye movements was restored and the axial alignments of the HVOR and VVOR returned to the preoperative values. The gain of the HVOR did not recover. The horizontal cervicoocular reflex (HCOR) was examined before the plugging operation and after compensation of asymmetry was complete. The gain and phase of the HCOR were not altered. A relatively simple set of explanations at a cellular level is proposed to account for the induction and compensation of asymmetric eye movements following a unilateral plug of the horizontal semicircular canal.

The variability of inner ear orientation in saurischian dinosaurs: testing the use of semicircular canals as a reference system for comparative anatomy

Directory of Open Access Journals (Sweden)

Jesús Marugán-Lobón

2013-08-01

Full Text Available The vestibular system of the inner ear houses three semicircular canals—oriented on three nearly-orthogonal planes—that respond to angular acceleration stimuli. In recent years, the orientation of the lateral semicircular canal (LSC has been regularly used to determine skull orientations for comparative purposes in studies of non-avian dinosaurs. Such orientations have been inferred based on fixing the LSC to a common set of coordinates (parallel to the Earth’s horizon, given that the orientation to gravity of this sensory system is assumed constant among taxa. Under this assumption, the LSC is used as a baseline (a reference system both to estimate how the animals held their heads and to describe craniofacial variation among dinosaurs. However, the available data in living birds (extant saurischian dinosaurs suggests that the orientation of the LSC in non-avian saurischian dinosaurs could have been very variable and taxon-specific. If such were the case, using the LSC as a comparative reference system would cause inappropriate visual perceptions of craniofacial organization, leading to significant descriptive inconsistencies among taxa. Here, we used Procrustes methods (Geometric Morphometrics, a suite of analytical tools that compares morphology on the basis of shared landmark homology, to show that the variability of LSC relative to skull landmarks is large (ca. 50° and likely unpredictable, thus making it an inconsistent reference system for comparing and describing the skulls of saurischian (sauropodomorph and theropod dinosaurs. In light of our results, the lateral semicircular canal is an inconsistent baseline for comparative studies of craniofacial morphology in dinosaurs.

Mechanical properties and motion of the cupula of the human semicircular canal.

Science.gov (United States)

Selva, Pierre; Oman, Charles M; Stone, Howard A

2009-01-01

The mathematical model for the dynamics of the cupula-endolymph system of the inner ear semicircular canal, as elaborated by numerous investigators, remains a foundational tool in all of vestibular physiology. Most models represent the cupula as a linear spring-like element of stiffness K=DeltaP/DeltaV, where DeltaV is the volume displaced upon application of a pressure difference DeltaP. The parameter K directly influences the long time constant of the cupula-endolymph system. Given estimates of K based on experiments, we use thick and thin bending membrane theory, and also finite-element simulations based on more realistic cupula morphologies, to estimate the human cupula's Young's modulus E approximately 5.4 Pa. We show that for a model morphology, thick bending membrane theory and finite-element predictions are in good agreement, and conclude that the morphology of the attachment of the cupula to the slope of the crista should not greatly influence the volume displacement. We note, however, that other biological materials with very low E are hydrogels that have significant viscoelastic properties. Experiments to directly measure E and investigate potential viscoelastic behavior ultimately may be needed. In addition, based on experimental images we study two other different shapes for the cupula and quantify their impact on the deflection of the cupula. We also use a three-dimensional finite-element model to analyze both the shear strain distribution and its time evolution near the sensory epithelium. We conclude that stimulation of sensory hair cells probably begins at the centre of the crista and spreads toward the periphery of the cupula and down the sides of the crista. Thus, spatio-temporal variations in the shearing stimulus are predicted to impact subsequent transduction and encoding. Finally, modeling the fluid-filled vertical channels believed to lie within the cupula, we investigate the impact of different tube diameters on the transverse displacement

Superior semicircular canal dehiscence in relation to the superior petrosal sinus: a potential cause of pulsatile tinnitus

International Nuclear Information System (INIS)

Liu, Z.; Bi, W.; Li, J.; Li, Q.; Dong, C.; Zhao, P.; Lv, H.; Wang, Z.

2015-01-01

Aim: To examine the association between superior semicircular canal dehiscence (SSCD) and pulsatile tinnitus (PT). Materials and methods: Two SSCD groups included 408 unilateral persistent PT patients, and 511 controls undergoing head and neck dual-phase contrast-enhanced computed tomography (DP-CECT) for reasons other than PT. The prevalence of type I (no the superior petrosal sinus running through the dehiscence) and type II (superior semicircular canal dehiscence in relation to the superior petrosal sinus) SSCD was analysed using chi-square test. Results: SSCD was identified in 5.1% (21/408) of PT ears, significantly different from 2% (8/408) of non-PT ears and 0.7% (7/1022) of controls. There was no significant difference in SSCD prevalence between non-PT ears in the PT group and controls. In the PT group, 15/21 ears were type II SSCD; 6/21 ears were type I. Fifteen combined non-PT and control ears with SSCD included two type II and 13 type I SSCD. The prevalence of type II SSCD in PT ears was significantly higher than that of non-PT ears in both groups, and the prevalence of type I SSCD in PT ears was similar to that of non-PT ears in both groups. Conclusion: Compared with type I SSCD, there may be a causal relationship between type II SSCD and PT. -- Highlights: •The prevalence of type II SSCD in PT ears was significantly higher than that in non-PT ears in both the PT group and controls. •The prevalence of type I SSCD was similar among the PT ears and non-PT ears. •The superior petrosal sinus running through the dehiscence may be essential for SSCD to induce PT. •Venous phase CT images with bone window settings is the modality method to differentiate type II from type I SSCD

The Density Difference of Cupula and Endolymph Changes the Mechanics of Semicircular Canals

Science.gov (United States)

Kondrachuk, Alexander V.; Boyle, Richard D.

2011-11-01

A precise balance of cupula and endolymph densities is key to the proper sensing of angular acceleration by the semicircular canals (SC). Estimates show that a density difference of cupula and endolymph (DD) as small as 10 - 4 g/cm3 is sufficient to make the SC sensitive to gravity and centrifugal forces provided they are comparable with gravity. As a result this might cause vestibular disorders. There are conditions under which the DD may even exceed this value. One of them is a change of intra-labyrinth pressure (IP) that may take place during a spaceflight. Here, the effect of DD on SC dynamics is considered using a simplified one-dimensional toroidal mathematical model of a canal for rotation with constant or harmonically oscillating angular velocities. The DD results in: dependence of cupula dynamics on orientation of both the gravity vector relative to the SC plane and the axis of rotation, as well as on the distance between the axis of rotation and the center of SC; shift of the cupula to a new position of equilibrium that depends on both the gravity vector and the parameters of head rotation; and onset of cupula oscillations with multiple frequencies under harmonic stimulation. The DD effect may be important under conditions of artificial gravity where the directions of centrifugal forces, the values of which are comparable with Earth's gravity, the orientations of the axis of rotation of a space station, and the axes of the SCs change during movements of the individuals and their habitat.

Central Lesions With Selective Semicircular Canal Involvement Mimicking Bilateral Vestibulopathy

Directory of Open Access Journals (Sweden)

Luke Chen

2018-04-01

Full Text Available Bilateral vestibulopathy (BVP, which is due to peripheral lesions, may selectively involve certain semicircular canal (SCC. Recent eye movement recordings with search coil and video head impulse test (HIT have provided insight in central lesions that can cause bilateral and selective SCC deficit mimicking BVP. Since neurological signs or ocular motor deficits maybe subtle or absent, it is critical to recognize central lesions correctly since there is prognostic and treatment implication. Acute floccular lesions cause bilateral horizontal SCC (HC impairment while leaving vertical SCC function unaffected. Vestibular nuclear lesions affect bilateral HC and posterior SCC (PC function, but anterior SCC (AC function is spared. When both eyes are recorded, medial longitudinal fasciculus lesions cause horizontal dysconjugacy in HC function and catch-up saccades, as well as selective deficiency of PC over AC function. Combined peripheral and central lesions may be difficult to distinguish from BVP. Anterior inferior cerebellar artery stroke causes two types of deficits: 1. ipsilateral pan-SCC deficits and contralateral HC deficit and 2. bilateral HC deficit with vertical SCC sparing. Metabolic disorders such as Wernicke encephalopathy characteristically involve HC but not AC or PC function. Gaucher disease causes uniform loss of all SCC function but with minimal horizontal catch-up saccades. Genetic cerebellar ataxias and cerebellar-ataxia neuropathy vestibular areflexia syndrome typically do not spare AC function. While video HIT does not replace the gold-standard, search coil HIT, clinicians are now able to rapidly and accurately identify specific pattern of SCC deficits, which can aid differentiation of central lesions from BVP.

Hierarchical Cluster Analysis of Semicircular Canal and Otolith Deficits in Bilateral Vestibulopathy

Directory of Open Access Journals (Sweden)

Alexander A. Tarnutzer

2018-04-01

Full Text Available BackgroundGait imbalance and oscillopsia are frequent complaints of bilateral vestibular loss (BLV. Video-head-impulse testing (vHIT of all six semicircular canals (SCCs has demonstrated varying involvement of the different canals. Sparing of anterior-canal function has been linked to aminoglycoside-related vestibulopathy and Menière’s disease. We hypothesized that utricular and saccular impairment [assessed by vestibular-evoked myogenic potentials (VEMPs] may be disease-specific also, possibly facilitating the differential diagnosis.MethodsWe searched our vHIT database (n = 3,271 for patients with bilaterally impaired SCC function who also received ocular VEMPs (oVEMPs and cervical VEMPs (cVEMPs and identified 101 patients. oVEMP/cVEMP latencies above the 95th percentile and peak-to-peak amplitudes below the 5th percentile of normal were considered abnormal. Frequency of impairment of vestibular end organs (horizontal/anterior/posterior SCC, utriculus/sacculus was analyzed with hierarchical cluster analysis and correlated with the underlying etiology.ResultsRates of utricular and saccular loss of function were similar (87.1 vs. 78.2%, p = 0.136, Fisher’s exact test. oVEMP abnormalities were found more frequent in aminoglycoside-related bilateral vestibular loss (BVL compared with Menière’s disease (91.7 vs. 54.6%, p = 0.039. Hierarchical cluster analysis indicated distinct patterns of vestibular end-organ impairment, showing that the results for the same end-organs on both sides are more similar than to other end-organs. Relative sparing of anterior-canal function was reflected in late merging with the other end-organs, emphasizing their distinct state. An anatomically corresponding pattern of SCC/otolith hypofunction was present in 60.4% (oVEMPs vs. horizontal SCCs, 34.7% (oVEMPs vs. anterior SCCs, and 48.5% (cVEMPs vs. posterior SCCs of cases. Average (±1 SD number of damaged sensors was 6.8 ± 2.2 out of 10

[High-frequency rotation sensation function damage of the crista of the horizontal semicircular canal induced by gentamicin and its morphological basis.].

Science.gov (United States)

Chen, Liang; He, Ming; Wang, Wu-Qing

2009-12-25

The goal of the present study was to explore high-frequency rotation sensation function damage of the crista of the horizontal semicircular canal induced by gentamicin and its morphological basis. The guinea pigs were randomly divided into four groups (group 1, 2, 3 and control group, n=20). The animals of treated groups received gentamicin subcutaneously (50 mg/kg per day) for 1 week (group 1), 2 weeks (group 2) and 3 weeks (group 3), respectively. The animals of control group were administered with equal volume of saline subcutaneously. Videonystagmography (VNG) evoked by ice water or high-frequency rotations, and vestibular evoked potential (VsEP) evoked by low- and high-frequency rotations were recorded after the administration. After VNG and VsEP were examined, the cristae of the horizontal semicircular canals were prepared for scanning and transmission electron microscopy. The results are as follows: (1) In VNG examination, after ice water stimulation, no obvious nystagmus was observed in the animals of group 3, and there was no significant difference in nystagmus frequency and duration among group 1, 2 and control group (P>0.05). After high- frequency rotations, no obvious nystagmus was yet observed in the animals of group 3. There were significant differences in the nystagmus frequency and duration of the VNG waves between the experimental group 2 and control group (P0.05). (2) In VsEP examination, there was no significant difference in the parameters of VsEP among group 1, 2 and control group (P>0.05), and VsEP was not observed in group 3 after low-frequency rotations. After high- frequency rotations, compared with control group, the latencies and amplitudes of P1 and P2 in group 2 significantly decreased (P0.05). Group 3 had no response of VsEP to high-frequency rotations. (3) Electron microscopy was used to observe the crista hair cells of the four groups. In control group, the hair cells were normal. In group 1, almost normal appearance with slight

Influence of gravity on the spatial orientation of eye nystagmus induced by unilateral lesion of horizontal semicircular canal.

Science.gov (United States)

Pettorossi, V E; Ermanno, M; Pierangelo, E; Silvarosa, G

2000-03-01

The influence of gravity in the orientation and slow phase eye velocity of the ocular nystagmus following unilateral damage of the cupula in the ampulla of the horizontal semicircular canal (UHCD) was investigated. The nystagmus was analysed at different sagittal head positions using the x-y infrared eye monitor technique. The nystagmus was almost horizontal at 0 degrees head pitch angle and remained partially fixed in space when the head was pitched upward or downward. The reorientation gain of the slow and quick phases was high (about 0.75) within +/- 45 degrees of head pitch angle, but beyond this range, it decreased greatly. The gain value depended on the lesion extension to otolithic receptors. The absolute value of the slow phase eye velocity of UHCD nystagmus was also modified systematically by the head pitch, showing a reduction in the upward and an increase in the downward.

Otitic meningitis, superior semicircular canal dehiscence, and encephalocele: a case series.

Science.gov (United States)

Lim, Zixiang Michael; Friedland, Peter Leon; Boeddinghaus, Rudolf; Thompson, Andrew; Rodrigues, Stephen John; Atlas, Marcus

2012-06-01

Otitic meningitis in the postantibiotic era is still a serious condition, requiring intensive treatment and prolonged rehabilitation. In view of the significant morbidity and mortality rate, conditions that may increase the likelihood of otitic meningitis developing should be treated promptly. The incidence of meningitis after asymptomatic encephaloceles of the middle cranial fossa varies greatly, and the management differs between elective surgical repair and expectant careful observation. Superior semicircular canal dehiscences (SSCDs) are postulated to have a congenital origin and are associated with a thin or dehiscent tegmen. Several cases of simultaneous SCCD and tegmen defects have been reported, but the findings of otitic meningitis, SCCD, and encephaloceles has, to the best of our knowledge, not been previously explored in the literature. We reviewed a series of 4 patients who all presented with a combination of otitic meningitis, encephaloceles, and SSCD. All the 4 patients we reviewed had meningitis secondary to otitis media with computed tomographic scans confirming the presence of SCCD with ipsilateral tegmen tympani defects and associated cephaloceles. All patients were treated with intravenous antibiotics and underwent surgery that ranged from myringotomy and ventilation tube insertions, mastoidectomy, and burr hole drainage for temporal lobe abscess. They were all associated with intensive care unit admission, significant morbidity, and prolonged hospital stays. There were no mortalities. We propose that in all SSCD patients, a careful computed tomographic examination of the cranial base should be undertaken to exclude other associated tegmen tympani defects. In cases of SSCD requiring surgery, we support the view that elective surgical repair be recommended where asymptomatic ipsilateral encephaloceles are found, to reduce the risk of otitic meningitis.

Efferent innervation of turtle semicircular canal cristae: comparisons with bird and mouse

Science.gov (United States)

Jordan, Paivi M.; Fettis, Margaret; Holt, Joseph C.

2014-01-01

In the vestibular periphery of nearly every vertebrate, cholinergic vestibular efferent neurons give rise to numerous presynaptic varicosities that target hair cells and afferent processes in the sensory neuroepithelium. Although pharmacological studies have described the postsynaptic actions of vestibular efferent stimulation in several species, characterization of efferent innervation patterns and the relative distribution of efferent varicosities among hair cells and afferents are also integral to understanding how efferent synapses operate. Vestibular efferent markers, however, have not been well characterized in the turtle, one of the animal models utilized by our laboratory. Here, we sought to identify reliable efferent neuronal markers in the vestibular periphery of turtle, to utilize these markers to understand how efferent synapses are organized, and to compare efferent neuronal labeling patterns in turtle with two other amniotes using some of the same markers. Efferent fibers and varicosities were visualized in the semicircular canal of Red-Eared Turtles (Trachemys scripta elegans), Zebra Finches (Taeniopygia guttata), and mice (Mus musculus) utilizing fluorescent immunohistochemistry with antibodies against choline acetyltransferase (ChAT). Vestibular hair cells and afferents were counterstained using antibodies to myosin VIIa and calretinin. In all species, ChAT labeled a population of small diameter fibers giving rise to numerous spherical varicosities abutting type II hair cells and afferent processes. That these ChAT-positive varicosities represent presynaptic release sites were demonstrated by colabeling with antibodies against the synaptic vesicle proteins synapsin I, SV2, or syntaxin and the neuropeptide calcitonin gene-related peptide (CGRP). Comparisons of efferent innervation patterns among the three species are discussed. PMID:25560461

Long-term results of middle fossa plugging of superior semicircular canal dehiscences: clinically and instrumentally demonstrated efficiency in a retrospective series of 16 ears.

Science.gov (United States)

Thomeer, Hans; Bonnard, Damien; Castetbon, Vincent; Franco-Vidal, Valérie; Darrouzet, Patricia; Darrouzet, Vincent

2016-07-01

The objective of this study is to report the surgical outcome after middle fossa approach (MFA) plugging in patients suffering from a superior semi-circular canal dehiscence (SCD) syndrome. This is a retrospective case review. Tertiary referral center. Sixteen ears in 13 patients with a SCD syndrome suffering from severe and disabling vestibular symptoms with a bony dehiscence on CT scan >3 mm and decreased threshold of cervical vestibular evoked potentials (cVEMPs). We assessed preoperatively: clinical symptoms, hearing, cVEMPs threshold, size of dehiscence and videonystagmography (VNG) with caloric and 100 Hz vibratory tests. Postoperatively, we noted occurrences of neurosurgical complication, evolution of audiological and vestibular symptoms, and evaluation of cVEMP data. Tullio's phenomenon was observed in 13 cases (81.3 %) and subjectively reported hearing loss in seven (43.7 %). All patients were so disabled that they had to stop working. No neurosurgical complications were observed in the postoperative course. In three cases (16.6 %), an ipsilateral and transitory immediate postoperative vestibular deficit associated with a sensorineural hearing loss (SNHL) was noted, which totally resolved with steroids and bed rest. All patients were relieved of audiological and vestibular symptoms and could return to normal activity with a mean follow-up of 31.1 months (range 3-95). No patient had residual SNHL. cVEMPs were performed in 14 ears postoperatively and were normalized in 12 (85.7 %). Two of the three patients operated on both sides kept some degree of unsteadiness and oscillopsia. MFA plugging of the superior semi-circular canal is an efficient and non-hearing deteriorating procedure.

Assessment of the anatomical relationship between the arcuate eminence and superior semicircular canal by computed tomography

International Nuclear Information System (INIS)

Seo, Yoshinobu; Ito, Tamio; Sasaki, Takehiko; Nakagawara, Jyoji; Nakamura, Hirohiko

2007-01-01

The anatomical relationship between the arcuate eminence (AE) and the superior semicircular canal (SSC) was examined by computed tomography (CT) in 52 petrous bones of 26 patients. After acquiring volume data by multidetector CT, 1-mm thick oblique bone window images perpendicular to the SSC were obtained from the axial images. The distances between the AE and the SSC, and the SSC and the superior surface of the petrous bone were measured. The AE corresponded exactly with the SSC in only 2/52 petrous bones, and corresponded well in 7/52. The AE was lateral to the SSC in 25/52 cases, medial to the SSC in 6/52 cases, intersected in 3/52 cases, and was indiscernible in 9/52 cases. The distance between the SSC and the petrous surface was 0 mm in 45/52 petrous bones, 1 mm in 5/52, 2 mm in 1/52, and 3 mm in 1/52. The SSC typically does not correspond exactly with the AE, and is generally located just under the surface of the petrous bone. Planning of the middle cranial fossa approach requires location of the SSC by CT. (author)

Effect of the Presence of Semi-circular Cylinders on Heat Transfer From Heat Sources Placed in Two Dimensional Channel

Directory of Open Access Journals (Sweden)

Ahmed W. Mustava

2013-04-01

Full Text Available The effect of a semi-circular cylinders in a two dimensional channel on heat transfer by forced convection from two heat sources with a constant temperature has been studied numerically. Each channel contains two heat sources; one on the upper surface of the channel and the other on the lower surface of the channel. There is semi-circular cylinder under the source in upper surface and there is semi-circular cylinder above the source in lower surface. The location of the second heat source with its semi-cylinder has been changed and keeps the first source with its semi- cylinder at the same location. The flow and temperature field are studied numerically with different values of Reynolds numbers and for different spacing between the centers of the semi-cylinders. The laminar flow field is analyzed numerically by solving the steady forms of the two-dimensional incompressible Navier- Stokes and energy equations.  The Cartesian velocity components and pressure on a collocated (non-staggered grid are used as dependent variables in the momentum equations, which discretized by finite volume method, body fitted coordinates are used to represent the complex channel geometry accurately, and grid generation technique based on elliptic partial differential equations is employed. SIMPLE algorithm is used to adjust the velocity field to satisfy the conservation of mass.  The range of Reynolds number is (Re= 100 – 800 and the range of the spacing between the semi-cylinders is(1-4 and the Prandtl number is 0.7.The results showed that increasing the spacing between the semi-cylinders increases the average of Nusselt number of the first heat source for all Reynolds numbers. As well as the results show that the best case among the cases studied to enhance the heat transfer is when the second heat source and its semi-cylinder located on at the distance (S=1.5 from the first half of the cylinder and the Reynolds number is greater than (Re ≥ 400 because of the

Radioanatomy of the singular nerve canal

Energy Technology Data Exchange (ETDEWEB)

Muren, C. [Dept. of Diagnostic Radiology, Sabbatsbergs Hospital, Stockholm (Sweden); Wadin, K. [University Hospital, Uppsala (Sweden); Dimopoulos, P. [University Hospital, Uppsala (Sweden)

1991-08-01

The singular canal conveys vestibular nerve fibers from the ampulla of the posterior semicircular canal to the posteroinferior border of the internal auditory meatus. Radiographic identification of this anatomic structure helps to distinguish it from a fracture. It is also a landmark in certain surgical procedures. Computed tomography (CT) examinations of deep-frozen temporal bone specimens were compared with subsequently prepared plastic casts of these bones, showing good correlation between the anatomy and the images. The singular canal and its variable anatomy were studied in CT examinations of 107 patients. The singular canal could be identified, in both the axial and in the coronal planes. Its point of entry into the internal auditory meatus varied considerably. (orig.)

Anatomy of the lamprey ear: morphological evidence for occurrence of horizontal semicircular ducts in the labyrinth of Petromyzon marinus

Science.gov (United States)

Maklad, Adel; Reed, Caitlyn; Johnson, Nicholas S.; Fritzsch, Bernd

2014-01-01

In jawed (gnathostome) vertebrates, the inner ears have three semicircular canals arranged orthogonally in the three Cartesian planes: one horizontal (lateral) and two vertical canals. They function as detectors for angular acceleration in their respective planes. Living jawless craniates, cyclostomes (hagfish and lamprey) and their fossil records seemingly lack a lateral horizontal canal. The jawless vertebrate hagfish inner ear is described as a torus or doughnut, having one vertical canal, and the jawless vertebrate lamprey having two. These observations on the anatomy of the cyclostome (jawless vertebrate) inner ear have been unchallenged for over a century, and the question of how these jawless vertebrates perceive angular acceleration in the yaw (horizontal) planes has remained open. To provide an answer to this open question we reevaluated the anatomy of the inner ear in the lamprey, using stereoscopic dissection and scanning electron microscopy. The present study reveals a novel observation: the lamprey has two horizontal semicircular ducts in each labyrinth. Furthermore, the horizontal ducts in the lamprey, in contrast to those of jawed vertebrates, are located on the medial surface in the labyrinth rather than on the lateral surface. Our data on the lamprey horizontal duct suggest that the appearance of the horizontal canal characteristic of gnathostomes (lateral) and lampreys (medial) are mutually exclusive and indicate a parallel evolution of both systems, one in cyclostomes and one in gnathostome ancestors.

Otolith and canal reflexes in human standing

Science.gov (United States)

Cathers, Ian; Day, Brian L; Fitzpatrick, Richard C

2005-01-01

We used galvanic vestibular stimulation (GVS) to identify human balance reflexes of the semicircular canals and otolith organs. The experiment used a model of vestibular signals arising from GVS modulation of the net signal from vestibular afferents. With the head upright, the model predicts that the GVS-evoked canal signal indicates lateral head rotation while the otolith signal indicates lateral tilt or acceleration. Both signify body sway transverse to the head. With the head bent forward, the model predicts that the canal signal indicates body spin about a vertical axis but the otolith signal still signifies lateral body motion. Thus, we compared electromyograms (EMG) in the leg muscles and body sway evoked by GVS when subjects stood with the head upright or bent forward. With the head upright, GVS evoked a large sway in the direction of the anodal electrode. This response was abolished with the head bent forward leaving only small, oppositely directed, transient responses at the start and end of the stimulus. With the head upright, GVS evoked short-latency (60–70 ms), followed by medium-latency (120 ms) EMG responses, of opposite polarity. Bending the head forward abolished the medium-latency but preserved the short-latency response. This is compatible with GVS evoking separate otolithic and canal reflexes, indicating that balance is controlled by independent canal and otolith reflexes, probably through different pathways. We propose that the short-latency reflex and small transient sway are driven by the otolith organs and the medium-latency response and the large sway are driven by the semicircular canals. PMID:15618274

Three-Dimensional Printed Prosthesis for Repair of Superior Canal Dehiscence.

Science.gov (United States)

Kozin, Elliott D; Remenschneider, Aaron K; Cheng, Song; Nakajima, Hideko Heidi; Lee, Daniel J

2015-10-01

Outcomes following repair of superior canal dehiscence (SCD) are variable, and surgery carries a risk of persistent or recurrent SCD symptoms, as well as a risk of hearing loss and vestibulopathy. Poor outcomes may occur from inadequate repair of the SCD or mechanical insult to the membranous labyrinth. Repair of SCD using a customized, fixed-length prosthesis may address current operative limitations and improve surgical outcomes. We aim to 3-dimensionally print customized prostheses to resurface or occlude bony SCD defects. Dehiscences were created along the arcuate eminence of superior semicircular canals in cadaveric temporal bones. Prostheses were designed and created using computed tomography and a 3-dimensional printer. The prostheses occupied the superior semicircular canal defect, reflected in postrepair computed tomography scans. This novel approach to SCD repair could have advantages over current techniques. Refinement of prosthesis design and materials will be important if this approach is translated into clinical use. © American Academy of Otolaryngology-Head and Neck Surgery Foundation 2015.

Assessment of the effects of superior canal dehiscence location and size on intracochlear sound pressures

NARCIS (Netherlands)

Niesten, Marlien E F; Stieger, Christof; Lee, Daniel J; Merchant, Julie P; Grolman, Wilko; Rosowski, John J; Nakajima, Hideko Heidi

2015-01-01

Superior canal dehiscence (SCD) is a defect in the bony covering of the superior semicircular canal. Patients with SCD present with a wide range of symptoms, including hearing loss, yet it is unknown whether hearing is affected by parameters such as the location of the SCD. Our previous human

MR Imaging of the Internal Auditory Canal and Inner Ear at 3T: Comparison between 3D Driven Equilibrium and 3D Balanced Fast Field Echo Sequences

Energy Technology Data Exchange (ETDEWEB)

Byun, Jun Soo; Kim, Hyung Jin; Yim, Yoo Jeong; Kim, Sung Tae; Jeon, Pyoung; Kim, Keon Ha [Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul (Korea, Republic of); Kim, Sam Soo; Jeon, Yong Hwan; Lee, Ji Won [Kangwon National University College of Medicine, Chuncheon (Korea, Republic of)

2008-06-15

To compare the use of 3D driven equilibrium (DRIVE) imaging with 3D balanced fast field echo (bFFE) imaging in the assessment of the anatomic structures of the internal auditory canal (IAC) and inner ear at 3 Tesla (T). Thirty ears of 15 subjects (7 men and 8 women; age range, 22 71 years; average age, 50 years) without evidence of ear problems were examined on a whole-body 3T MR scanner with both 3D DRIVE and 3D bFFE sequences by using an 8-channel sensitivity encoding (SENSE) head coil. Two neuroradiologists reviewed both MR images with particular attention to the visibility of the anatomic structures, including four branches of the cranial nerves within the IAC, anatomic structures of the cochlea, vestibule, and three semicircular canals. Although both techniques provided images of relatively good quality, the 3D DRIVE sequence was somewhat superior to the 3D bFFE sequence. The discrepancies were more prominent for the basal turn of the cochlea, vestibule, and all semicircular canals, and were thought to be attributed to the presence of greater magnetic susceptibility artifacts inherent to gradient-echo techniques such as bFFE. Because of higher image quality and less susceptibility artifacts, we highly recommend the employment of 3D DRIVE imaging as the MR imaging choice for the IAC and inner ear

Long-term outcomes of a transmastoid lateral semicircular canal approach to congenital CSF otorrhea in children associated with recurrent meningitis and severe inner ear malformation.

Science.gov (United States)

Wang, Jie; Li, Yongxin; Chen, Shubin; Hao, Xinping

2016-08-01

To investigate the long-term effectiveness of transmastoid lateral semicircular canal approach (TMLSCCA) to repair cerebrospinal fluid (CSF) leakage in children associated with recurrent meningitis and severe congenital inner malformation. A retrospective study was conducted in a university hospital, academic medical center. Fifteen children with recurrent meningitis, secondary to severe congenital inner ear malformation, were included in the study. All of them had CSF associated otorrhea and treated using TLSCCA to repair CSF otorrhea by packing the vestibule with muscle and fascia. Observation of the status of postoperative CSF leakage, recurrence of meningitis and complication were conducted. None of the cases had recurrent meningitis and CSF leakage after their TLSCCA procedure in the follow-up period of 1-8.5 years. One case presented with transient facial nerve paralysis and completely recovered 3 months later. TLSCCA for CSF otorrhea in children with recurrent meningitis secondary to congenital inner ear malformation is an alternative approach that offers some advantages. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

[Efficacy of quick repositioning maneuver for posterior semicircular canal benign paroxysmal positional vertigo in different age groups].

Science.gov (United States)

Zhang, Hao; Li, Jinrang; Guo, Pengfei; Tian, Shiyu; Li, Keliang

2015-12-01

To observe the short and long-term efficacy of quick repositioning maneuver for posterior semicircular canal benign paroxysmal positional vertigo (PC-BPPV) in different age groups. The clinical data of 113 adult patients with single PC-BPPV who underwent quick repositioning maneuver from July 2009 to February 2015 were retrospectively analyzed. The quick repositioning maneuver was to roll the patient from involved side to healthy side in the coronal plane for 180° as quickly as possible. The patients were divided into 3 groups according to different ages: young group (age group (45 ≤ age group (≥ 60 years). The short and long term outcomes of the three groups were observed. The left ear was involved in 58 cases (51.3%) and the right ear in 55 cases (48.7%). The short term improvement rates of the young, middle-age and the old groups were 92.5%, 93.6% and 92.3% respectively, and the long term improvement rate was 90.0%, 85.1% and 73.1% respectively. There was no significant difference among the three groups in short and long term outcomes (P > 0.05). The recurrence rate of the three groups was 5.0%, 6.4% and 15.4% respectively, also no significant difference (P > 0.05). The quick repositioning maneuver along the coronal plane for PC-BPPV has a definite effect for every age groups. The method is simple, rapid and easy to master, and the patients are tolerated the maneuver well without evident side effect.

Gradually varied flow in compound open channels; Flujo gradualmente variado en canales de seccion compuesta

Energy Technology Data Exchange (ETDEWEB)

Sotela Avila, Gilberto [Universidad Nacional Autonoma de Mexico (Mexico)

2001-03-01

The author shows that the computation of gradually-varied-flow profiles in prismatic compound channels involves the solution of the dynamic equation, but using the compound channel Froude number defined by Blalock and Sturm. The same equation is used for non-prismatic channels by dividing the channel into short reaches and carrying the computation step by step through an iterative process. [Spanish] El autor demuestra que los perfiles del flujo gradualmente variado en canales prismaticos de seccion compuesta se pueden determinar mediante la integracion de la llamada ecuacion dinamica, pero usando el numero de Froude definido por Blalock y Sturm para este tipo de canales. Cuando no son prismaticos, tambien se aplica la ecuacion de la energia por tramos y el calculo sigue un proceso iterativo una vez definidos los tirantes criticos multiples y la zona en que se desarrolla el perfil.

Prospective radiological study concerning a series of patients suffering from conductive or mixed hearing loss due to superior semicircular canal dehiscence.

Science.gov (United States)

Martin, Christian; Chahine, Pierre; Veyret, Charles; Richard, Céline; Prades, Jean Michel; Pouget, Jean François

2009-08-01

The aim of this study is to appreciate the incidence of patients with isolated conductive hearing loss with normal drum due to superior semicircular canal dehiscence (SCD). It is a prospective radiological study. Two hundred and seventy-two patients with a normal drum suffering from isolated unilateral or bilateral conductive or mixed hearing loss were included in a prospective radiological study. A high resolution computerized tomography (HRCT) was performed in all the patients. Those who were found to have a unilateral or bilateral SCD underwent further etiological, clinical, audiologic evaluation. Ten patients with conductive or mixed hearing loss were found to have a unilateral or bilateral SCD. The disease was bilateral in five cases, and most often associated with a dehiscence of the tegmen tympani on both sides, supporting the theory of the congenital nature of the disease. There was no clear correlation between symptoms and the size of the SCD. Because patients were not suffering from incapacitating vestibular symptoms, they were not operated for surgical occlusion of the SCD, and were referred to a hearing aid specialist to improve hearing. Conductive or mixed hearing loss due to SCD is relatively frequent, justifying in our opinion that a systematic HRCT be carried out before surgery of any patient with conductive hearing loss.

Hearing eyeball and/or eyelid movements on the side of a unilateral superior semicircular canal dehiscence.

Science.gov (United States)

Bertholon, Pierre; Reynard, Pierre; Lelonge, Yann; Peyron, Roland; Vassal, François; Karkas, Alexandre

2018-02-01

Hearing of eyeball movements has been reported in superior semicircular canal dehiscence (SSCD), but not hearing of eyelid movements. Our main objective was to report the hearing of eyeball and/or eyelid movements in unilateral SSCD. Our secondary objective was to access its specificity to SSCD and discuss the underlying mechanism. Six patients with SSCD who could hear their eyeball and/or eyelid movements were retrospectively reviewed. With the aim of comparisons, eight patients with an enlarged vestibular aqueduct (EVA), who share the same mechanism of an abnormal third window, were questioned on their ability to hear their eyeball and/or eyelid movements. Three patients with SSCD could hear both their eyeball and eyelid movements as a soft low-pitch friction sound. Two patients with SSCD could hear only their eyelid movements, one of whom after the surgery of a traumatic chronic subdural hematoma. The latter remarked that every gently tapping on the skin covering the burr-hole was heard in his dehiscent ear as the sound produced when banging on a drum, in keeping with a direct transmission of the sound to the inner ear via the cerebrospinal fluid. One patient with SSCD, who could hear only his eyeball movements, had other disabling symptoms deserving operation through a middle fossa approach with an immediate relief of his symptoms. None of the eight patients with EVA could hear his/her eyeball or eyelid movements. Hearing of eyeball and/or eyelid movements is highly suggestive of a SSCD and do not seem to occur in EVA. In case of radiological SSCD, clinicians should search for hearing of eyeball and/or eyelid movements providing arguments for a symptomatic dehiscence. The underlying mechanism is discussed particularly the role of a cerebrospinal fluid transmission.

[Shaping ability of multi-taper nickel-titanium files in simulated resin curved root canal].

Science.gov (United States)

Luo, Hong-Xia; Huang, Ding-Ming; Jia, Liu-He; Luo, Shi-Gao; Gao, Xiao-Jie; Tan, Hong; Zhou, Xue-Dong

2006-08-01

To compare the shaping ability of ISO standard stainless steel K files and multi-taper ProTaper nickel-titanium files in simulated resin curved root canals. METHODS Thirty simulated resin root canals were randomly divided into three groups and prepared by stainless steel K files, hand ProTaper, rotary ProTaper, respectively. The amount of material removed from inner and outer wall and canal width after canal preparation was measured, while the canal curvature before and after canal preparation and canals aberrations were recorded. The stainless steel K files removed more material than hand ProTaper and rotary ProTaper at the outer side of apex and inner side of curvature (P ProTaper group (P ProTaper had no evident aberration. The shaping ability of ProTaper is better than stainless steel K files.

The prevalence of superior semicircular canal dehiscence in conductive and mixed hearing loss in the absence of other pathology using submillimetric temporal bone computed tomography.

Science.gov (United States)

Lee, Young Hen; Rivas-Rodriguez, Francisco; Song, Jae-Jun; Yang, Kyung-Sook; Mukherji, Suresh K

2014-01-01

The objective of this study was to assess the relationship between superior semicircular canal dehiscence (SSCD) and hearing impairment. We retrospectively compared the prevalence of SSCD in the ears classified as conductive hearing loss (CHL), mixed hearing loss (MHL), and normal hearing status using submillimetric temporal bone computed tomography (TBCT) on the basis of coronal and additional reformatted planes dedicated to SSCD. From the patients with CHL (n = 127) and MHL (n = 45), the overall prevalence of SSCD in the ears classified as CHL, MHL, and normal hearing status were 6.6%, 7.2%, and 3.0%, respectively. Furthermore, the odds ratio for SSCD in the absence of any cause of hearing loss (eg, dysfunction of the tympanic membrane or middle ear, TBCT abnormalities, otosclerosis, trauma, surgery) was 5.35 in MHL (4/27; P = 0.037, 95% confidence interval, 1.1-25.81) and 3.31 in CHL (5/61; P = 0.115, 95% confidence interval, 0.75-14.63), compared with normal hearing status. Bony covering of the SSC should be specifically evaluated in patients with hearing impairment using submillimetric TBCT.

Utricular paresis and semicircular canal hyperactivity: a distinct otolith syndrome.

Science.gov (United States)

Angeli, Simon I; Snapp, Hillary; Velandia, Sandra; Morgenstein, Kari

2015-04-01

Although combined utricular and canal paresis has been described previously, this is the first report of canal hyperactivity associated with utricular hypofunction. Unsteadiness and swaying were the most common symptoms, and patients with shorter duration of symptoms also had positional vertigo. We propose that this syndrome is a variant of utricular dysfunction and should be considered in the differential diagnosis of peripheral vestibular disorders. To describe a syndrome of instability associated with utricular dysfunction and hyperactive caloric responses. The study comprised 11 consecutive patients exhibiting abnormalities of the eccentric subjective visual vertical test (e-SVV) and high responses during the caloric test of the videonystagmography (VNG). We carried out a review of symptoms, physical examination, and vestibular tests. There was no gender predilection or obvious etiology. The patients' main complaint included instability with linear symptoms (i.e., tilting, rocking, and swaying), with positional vertigo as a secondary symptom. Oculomotor testing, visual fixation index, and brain MRI were normal, excluding a central nervous system disorder. VNG was essentially normal except for hyperactive responses during the caloric testing in all patients. Abnormal e-SVV was found in 10 patients unilaterally and bilaterally in 1 patient. Abnormal oVEMP was found in seven of seven patients, further supporting a utricular site of lesion.

Multi-channel polarized thermal emitter

Science.gov (United States)

Lee, Jae-Hwang; Ho, Kai-Ming; Constant, Kristen P

2013-07-16

A multi-channel polarized thermal emitter (PTE) is presented. The multi-channel PTE can emit polarized thermal radiation without using a polarizer at normal emergence. The multi-channel PTE consists of two layers of metallic gratings on a monolithic and homogeneous metallic plate. It can be fabricated by a low-cost soft lithography technique called two-polymer microtransfer molding. The spectral positions of the mid-infrared (MIR) radiation peaks can be tuned by changing the periodicity of the gratings and the spectral separation between peaks are tuned by changing the mutual angle between the orientations of the two gratings.

Contribution to the determination of the mixing length in a channel; Contribution a la determination de la longueur de bon melange dans un canal

Energy Technology Data Exchange (ETDEWEB)

Spitalnik, J [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-04-15

A formula giving the mixing length in a rectangular channel is established. The value of that mixing length depends on the geometrical dimensions of the channel, the longitudinal, lateral and vertical diffusion coefficients, and the water average velocity in the channel. (author) [French] On etablit une formule permettant de calculer la longueur de bon melange dans un canal rectangulaire. La valeur de cette longueur depend des donnees geometriques du canal, des coefficients de diffusion longitudinal, transversal et vertical, et de la vitesse moyenne de l'eau dans le canal. (auteur)

Dense Clustered Multi-Channel Wireless Sensor Cloud

Directory of Open Access Journals (Sweden)

Sivaramakrishnan Sivakumar

2015-08-01

Full Text Available Dense Wireless Sensor Network Clouds have an inherent issue of latency and packet drops with regards to data collection. Though there is extensive literature that tries to address these issues through either scheduling, channel contention or a combination of the two, the problem still largely exists. In this paper, a Clustered Multi-Channel Scheduling Protocol (CMSP is designed that creates a Voronoi partition of a dense network. Each partition is assigned a channel, and a scheduling scheme is adopted to collect data within the Voronoi partitions. This scheme collects data from the partitions concurrently and then passes it to the base station. CMSP is compared using simulation with other multi-channel protocols like Tree-based Multi-Channel, Multi-Channel MAC and Multi-frequency Media Access Control for wireless sensor networks. Results indicate CMSP has higher throughput and data delivery ratio at a lower power consumption due to network partitioning and hierarchical scheduling that minimizes load on the network.

The reliability of nonlinear least-squares algorithm for data analysis of neural response activity during sinusoidal rotational stimulation in semicircular canal neurons.

Science.gov (United States)

Ren, Pengyu; Li, Bowen; Dong, Shiyao; Chen, Lin; Zhang, Yuelin

2018-01-01

Although many mathematical methods were used to analyze the neural activity under sinusoidal stimulation within linear response range in vestibular system, the reliabilities of these methods are still not reported, especially in nonlinear response range. Here we chose nonlinear least-squares algorithm (NLSA) with sinusoidal model to analyze the neural response of semicircular canal neurons (SCNs) during sinusoidal rotational stimulation (SRS) over a nonlinear response range. Our aim was to acquire a reliable mathematical method for data analysis under SRS in vestibular system. Our data indicated that the reliability of this method in an entire SCNs population was quite satisfactory. However, the reliability was strongly negatively depended on the neural discharge regularity. In addition, stimulation parameters were the vital impact factors influencing the reliability. The frequency had a significant negative effect but the amplitude had a conspicuous positive effect on the reliability. Thus, NLSA with sinusoidal model resulted a reliable mathematical tool for data analysis of neural response activity under SRS in vestibular system and more suitable for those under the stimulation with low frequency but high amplitude, suggesting that this method can be used in nonlinear response range. This method broke out of the restriction of neural activity analysis under nonlinear response range and provided a solid foundation for future study in nonlinear response range in vestibular system.

Multi-channel Kondo necklace

International Nuclear Information System (INIS)

Fazekas, P.; Kee Haeyoung.

1993-06-01

A multi-channel generalization of Doniach's Kondo necklace model is formulated, and its phase diagram studied in the mean-field approximation. Our intention is to introduce the possible simplest model which displays some of the features expected from the overscreened Kondo lattice. The N conduction electron channels are represented by N sets of pseudospins τ J , j = 1 1,..., N which are all antiferromagnetically coupled to a periodic array of modul S = 1/2 spins. Exploiting permutation symmetry in the channel index j allows us to write down the self-consistency equation for general N. For N > 2, we find that the critical temperature is rising with increasing Kondo interaction; we interpret this effect by pointing out that the Kondo coupling creates the composite pseudospin objects which undergo an ordering transition. The relevance of our findings to the underlying fermionic multi-channel problem is discussed. (author). 33 refs, 1 fig

Modelling customer behaviour in multi-channel service distribution

NARCIS (Netherlands)

Heinhuis, D.; de Vries, E.J.; Kundisch, D.; Veit, D.J.; Weitzel, T.; Weinhardt, C.

2009-01-01

Financial service providers are innovating their distribution strategy into multi-channel strategies. The success of a multi-channel approach and the high investments made in information systems and enterprise architectures depends on the adoption and multi-channel usage behaviour of consumers. We

Iterative equalization for OFDM systems over wideband Multi-Scale Multi-Lag channels

NARCIS (Netherlands)

Xu, T.; Tang, Z.; Remis, R.; Leus, G.

2012-01-01

OFDM suffers from inter-carrier interference (ICI) when the channel is time varying. This article seeks to quantify the amount of interference resulting from wideband OFDM channels, which are assumed to follow the multi-scale multi-lag (MSML) model. The MSML channel model results in full channel

Otolith-Canal Convergence In Vestibular Nuclei Neurons

Science.gov (United States)

Dickman, J. David; Si, Xiao-Hong

2002-01-01

The current final report covers the period from June 1, 1999 to May 31, 2002. The primary objective of the investigation was to determine how information regarding head movements and head position relative to gravity is received and processed by central vestibular nuclei neurons in the brainstem. Specialized receptors in the vestibular labyrinths of the inner ear function to detect angular and linear accelerations of the head, with receptors located in the semicircular canals transducing rotational head movements and receptors located in the otolith organs transducing changes in head position relative to gravity or linear accelerations of the head. The information from these different receptors is then transmitted to central vestibular nuclei neurons which process the input signals, then project the appropriate output information to the eye, head, and body musculature motor neurons to control compensatory reflexes. Although a number of studies have reported on the responsiveness of vestibular nuclei neurons, it has not yet been possible to determine precisely how these cells combine the information from the different angular and linear acceleration receptors into a correct neural output signal. In the present project, rotational and linear motion stimuli were separately delivered while recording responses from vestibular nuclei neurons that were characterized according to direct input from the labyrinth and eye movement sensitivity. Responses from neurons receiving convergent input from the semicircular canals and otolith organs were quantified and compared to non-convergent neurons.

Multi-channel Kondo necklace

Energy Technology Data Exchange (ETDEWEB)

Fazekas, P; Haeyoung, Kee

1993-06-01

A multi-channel generalization of Doniach`s Kondo necklace model is formulated, and its phase diagram studied in the mean-field approximation. Our intention is to introduce the possible simplest model which displays some of the features expected from the overscreened Kondo lattice. The N conduction electron channels are represented by N sets of pseudospins {tau}{sub J}, j = 1 1,..., N which are all antiferromagnetically coupled to a periodic array of modul S = 1/2 spins. Exploiting permutation symmetry in the channel index j allows us to write down the self-consistency equation for general N. For N > 2, we find that the critical temperature is rising with increasing Kondo interaction; we interpret this effect by pointing out that the Kondo coupling creates the composite pseudospin objects which undergo an ordering transition. The relevance of our findings to the underlying fermionic multi-channel problem is discussed. (author). 33 refs, 1 fig.

Multi-channel mechanical test machine for HANARO (I)

International Nuclear Information System (INIS)

Song, M. S.; Choi, Y.; Cho, M. S.; Kim, B. G.; Kang, Y. H.

2004-01-01

Design and fabrication of multi-channel mechanical test machine is useful and important for the study of in-pile test of nuclear materials in HANARO. The dimension and shape of the multi-channel mechanical test machine should be fixed to a test reactor and their objectives. KAERI successfully developed a non-instrumented multi-channel mechanical test machine for material irradiation tests in a domestic research reactor, HANARO. This results in strongly stimulating and accelerating irradiation tests of materials in domestic industry and research fields with HANARO. Although various types of in-pile creep capsule were made for well installation in each test reactor, there is no in-pile creep multi-channel mechanical test machine for HANARO. Hence, the objectives of this study are to fabricate and test a multi-channel mechanical test machine of HANARO

Investigations of Orchestra Auralizations Using the Multi-Channel Multi-Source Auralization Technique

DEFF Research Database (Denmark)

Vigeant, Michelle; Wang, Lily M.; Rindel, Jens Holger

2008-01-01

a multi-channel multi-source auralization technique, involving individual five-channel anechoic recordings of each instrumental part of two symphonies. In the first study, these auralizations were subjectively compared to orchestra auralizations made using (a) a single omni-directional source, (b......) a surface source, and (c) single-channel multi-source method. Results show that the multi-source auralizations were rated to be more realistic than the surface source ones and to have larger source width than the single omni-directional source auralizations. No significant differences were found between......Room acoustics computer modeling is a tool for generating impulse responses and auralizations from modeled spaces. The auralizations are commonly made from a single-channel anechoic recording of solo instruments. For this investigation, auralizations of an entire orchestra were created using...

Mimicking multi-channel scattering with single-channel approaches

OpenAIRE

Grishkevich, Sergey; Schneider, Philipp-Immanuel; Vanne, Yulian V.; Saenz, Alejandro

2009-01-01

The collision of two atoms is an intrinsic multi-channel (MC) problem as becomes especially obvious in the presence of Feshbach resonances. Due to its complexity, however, single-channel (SC) approximations, which reproduce the long-range behavior of the open channel, are often applied in calculations. In this work the complete MC problem is solved numerically for the magnetic Feshbach resonances (MFRs) in collisions between generic ultracold 6Li and 87Rb atoms in the ground state and in the ...

Flowing equation gradually varied in rectangles channels on depth curve; Ecuacion del flujo gradualmente variado en canales rectangulares de fondo curvo

Energy Technology Data Exchange (ETDEWEB)

Sotelo-Avila, G.; Gallegos-Silva, J. [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2002-03-01

The study of channel flow usually have its basis in the hydrostatic distribution of pressure and the rectilinear flow hypotheses. It is from this hypothesis that the main flow equations are obtained. However, this is not applicable to a vertically curved flow that is present in a curved bed channel. This kind of channel is used to join two different slopes or in ski jumps. This kind of flow presents several changes from the rectilinear flow as in the velocity and pressure distributions and even in the energy loses. The authors of this article propose an equation of gradually varied flow for vertically-curved bed rectangular channels that adds a coefficient to modify the velocity in the calculus of the local friction gradient. With these results is possible now to analyze flow profiles in vertically-curved bed channels where before were used the methods for straight channels and therefore, increase accuracy. [Spanish] Las hipotesis del movimiento rectilineo y de distribucion hidrostatica de la presion son ciertamente las mas importantes en la hidraulica de canales, y de ellas se derivan los principales modelos de flujo que usualmente emplean. Sin embargo, no es valido aplicar la misma hipotesis y metodos de analisis al flujo curvilineo, que ocurre cuando el canal adopta curvaturas verticales en el fondo, las cuales inducen cambios importantes en la distribucion de la velocidad, presion y hasta en la perdida d energia. Tal es el caso de canales que contienen curvas verticales para unir tramos de distintas pendientes y producir el cambio en la direccion del flujo en cubetas deflectoras y vertedores en tunel. Los autores de este articulo proponen una ecuacion de flujo gradualmente variado en canales rectangulares de fondo curvo, esta es de gran utilidad en la determinacion del perfil del flujo con dichas caracteristicas, donde se plantea la adicion de un factor de amplificacion de la velocidad en el calculo del gradiente local de friccion, para tomar en cuenta el

[Diagnostic significance of multi-slice computed tomography imaging in congenital inner ear malformations].

Science.gov (United States)

Ma, Hui; Han, Ping; Liang, Bo; Liu, Fang; Tian, Zhi-Liang; Lei, Zi-Qiao; Li, You-Lin; Kong, Wei-Jia

2005-04-01

To evaluate the feasibility and usability of multi-slice computed tomography (MSCT) in congenital inner ear malformations. Fourty-four patients with sensorineural hearing loss (SNHL) were examined by a Somatom Sensation 16 (siemens, Germany) CT scanner with following parameters: 120 kV, 100 mAs, 0.75 mm collimation, 1 mm reconstruction increment, a pitch factor of 1 and a field of view of 100 mm. The axial images of interested ears were reconstructed with 0.1 mm reconstruction increment, and a field of view of 50 mm. The 3D reconstructions were done with volume rendering technique (VRT) on the workstation (3D Virtuoso and Wizard,siemens). Twenty-five patients were normal and 19 patients (36 ears) were congenital inner ear malformations among 44 patients scanned with MSCT. Of the malformations, all the axial, MPR and VRT images can display the site and degree in 33 ears. VRT images were superior to the axial images in displaying the malformations in 3 ears with the small lateral semicircular canal malformations. The malformations were Michel deformity (1 ear), common cavity deformity (3 ears), incomplete partition I (3 ears), incomplete partition II (Mondini deformity, 5 ears), vestibular and semicircular canal malformations( 14 ears), vestibular aqueduct dilate( 16 ears, of which 6 ears accompanied by other malformations), the internal auditory canal malformation(8 ears, all accompanied by other malformations). MSCT allows a comprehensively assessing various congenital ear malformations through high quality MPR and VRT reconstructions. VRT images can display the site and degree of the malformations three-dimensionally and intuitionisticly. It is very useful to the cochlear implantation.

Assessing and Testing Hydrokinetic Turbine Performance and Effects on Open Channel Hydrodynamics: An Irrigation Canal Case Study.

Energy Technology Data Exchange (ETDEWEB)

Gunawan, Budi [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neary, Vincent Sinclair [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mortensen, Josh [United States Bureau of Reclamation, Denver, CO (United States); Roberts, Jesse D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-05-01

Hydrokinetic energy from flowing water in open channels has the potential to support local electricity needs with lower regulatory or capital investment than impounding water with more conventional means. MOU agencies involved in federal hydropower development have identified the need to better understand the opportunities for hydrokinetic (HK) energy development within existing canal systems that may already have integrated hydropower plants. This document provides an overview of the main considerations, tools, and assessment methods, for implementing field tests in an open-channel water system to characterize current energy converter (CEC) device performance and hydrodynamic effects. It describes open channel processes relevant to their HK site and perform pertinent analyses to guide siting and CEC layout design, with the goal of streamlining the evaluation process and reducing the risk of interfering with existing uses of the site. This document outlines key site parameters of interest and effective tools and methods for measurement and analysis with examples drawn from the Roza Main Canal, in Yakima, WA to illustrate a site application.

Essays on Online and Multi-Channel Marketing

OpenAIRE

Zhang, Lingling

2016-01-01

Firms increasingly adopt online and multi-channel marketing strategies to reach and persuade consumers. Therefore, designing an effective marketing mix is critical to their success. The aim of my dissertation is to understand the strategy behind firms’ channel choices and assess marketing effectiveness. It consists of three large-scale empirical studies examining several important aspects of online and multi-channel marketing. My first essay focuses on the business-to-business (B2B) inte...

Multi-channel software defined radio experimental evaluation and analysis

CSIR Research Space (South Africa)

Van der Merwe, JR

2014-09-01

Full Text Available Multi-channel software-defined radios (SDRs) can be utilised as inexpensive prototyping platforms for transceiver arrays. The application for multi-channel prototyping is discussed and measured results of coherent channels for both receiver...

The Time Division Multi-Channel Communication Model and the Correlative Protocol Based on Quantum Time Division Multi-Channel Communication

International Nuclear Information System (INIS)

Liu Xiao-Hui; Pei Chang-Xing; Nie Min

2010-01-01

Based on the classical time division multi-channel communication theory, we present a scheme of quantum time-division multi-channel communication (QTDMC). Moreover, the model of quantum time division switch (QTDS) and correlative protocol of QTDMC are proposed. The quantum bit error rate (QBER) is analyzed and the QBER simulation test is performed. The scheme shows that the QTDS can carry out multi-user communication through quantum channel, the QBER can also reach the reliability requirement of communication, and the protocol of QTDMC has high practicability and transplantable. The scheme of QTDS may play an important role in the establishment of quantum communication in a large scale in the future. (general)

Multi-channel data acquisition system for CT

International Nuclear Information System (INIS)

Cao Fuqiang; He Bin; Liu Guohua; Xu Minjian

2009-01-01

The architecture design and realization of a data acquisition system for multi-channel CT is described. The article introduces the conversion of analog signal to digital signal, the data cache and transmission. This data acquisition system can be widely used in the system which requires the multi-channel, weak current signal detection. (authors)

Computer-based multi-channel analyzer based on internet

International Nuclear Information System (INIS)

Zhou Xinzhi; Ning Jiaoxian

2001-01-01

Combined the technology of Internet with computer-based multi-channel analyzer, a new kind of computer-based multi-channel analyzer system which is based on browser is presented. Its framework and principle as well as its implementation are discussed

Endoscopic root canal treatment.

Science.gov (United States)

Moshonov, Joshua; Michaeli, Eli; Nahlieli, Oded

2009-10-01

To describe an innovative endoscopic technique for root canal treatment. Root canal treatment was performed on 12 patients (15 teeth), using a newly developed endoscope (Sialotechnology), which combines an endoscope, irrigation, and a surgical microinstrument channel. Endoscopic root canal treatment of all 15 teeth was successful with complete resolution of all symptoms (6-month follow-up). The novel endoscope used in this study accurately identified all microstructures and simplified root canal treatment. The endoscope may be considered for use not only for preoperative observation and diagnosis but also for active endodontic treatment.

Multi-channel coherent perfect absorbers

KAUST Repository

Bai, Ping

2016-05-18

The absorption efficiency of a coherent perfect absorber usually depends on the phase coherence of the incident waves on the surfaces. Here, we present a scheme to create a multi-channel coherent perfect absorber in which the constraint of phase coherence is loosened. The scheme has a multi-layer structure such that incident waves in different channels with different angular momenta can be simultaneously and perfectly absorbed. This absorber is robust in achieving high absorption efficiency even if the incident waves become "incoherent" and possess "random" wave fronts. Our work demonstrates a unique approach to designing highly efficient metamaterial absorbers. © CopyrightEPLA, 2016.

Multi-channel coherent perfect absorbers

KAUST Repository

Bai, Ping; Wu, Ying; Lai, Yun

2016-01-01

The absorption efficiency of a coherent perfect absorber usually depends on the phase coherence of the incident waves on the surfaces. Here, we present a scheme to create a multi-channel coherent perfect absorber in which the constraint of phase coherence is loosened. The scheme has a multi-layer structure such that incident waves in different channels with different angular momenta can be simultaneously and perfectly absorbed. This absorber is robust in achieving high absorption efficiency even if the incident waves become "incoherent" and possess "random" wave fronts. Our work demonstrates a unique approach to designing highly efficient metamaterial absorbers. © CopyrightEPLA, 2016.

Momento de inercia a la torsión de barras de perfil canal // Torsional inertia Moment for a profile bar channel

Directory of Open Access Journals (Sweden)

R. Rivero Galán

1998-01-01

Full Text Available En el presente trabajo se brindan fórmulas y coeficientes para la determinación del momento de inercia a la torsión de una barrade perfil canal. Las fórmulas obtenidas se validan mediante la simulación de diferentes estructuras de uniones entre canales conel uso del método de los elementos finitos._______________________________________________________________________AbstractIn the paper are offered formulations and coefficients for the determination of the moment of inertia to the twist for a profilebar channel. The obtained formulations are validated through the simulation by the finite elements method of differentstructures of unions between channels.

Horizontal canal benign paroxysmal positional vertigo: diagnosis and treatment of 37 patients

Directory of Open Access Journals (Sweden)

Eliana Teixeira Maranhão

2015-06-01

Full Text Available Benign paroxysmal positional vertigo (BPPV, the most frequent cause of vertigo is associated with high morbidity in the elderly population. The most common form is linked to debris in the posterior semicircular canal. However, there has been an increasing number of reported BPPV cases involving the horizontal canals. The purpose of this article is to highlight the clinical features, diagnosis, and treatment in 37 patients with horizontal canal BPPV; twenty-six with geotropic nystagmus, and eleven with the apogeotropic form. Treatment consisted of the Gufoni manoeuver in eighteen patients (48.6%, the barbecue 360° maneuver in twelve patients (32.4%, both manoeuvers in four patients (10.8%, both manoeuvers plus head shaking in one patient (2.7%, and the Gufoni maneuver plus head shaking in two patients. Cupulolithiasis patients were asked to sleep in a forced prolonged position. We obtained a complete resolution of vertigo and nystagmus in 30 patients (81.0% on the initial visit.

Superior canal dehiscence in a patient with three failed stapedectomy operations for otosclerosis: a case report

Directory of Open Access Journals (Sweden)

Sudhoff Holger H

2011-02-01

Full Text Available Abstract Introduction This case illustrates that superior semicircular canal dehiscence syndrome can be associated with a "pseudo"-conductive hearing loss, a symptom that overlaps with the clinical appearance of otosclerosis. Case presentation We present the case of a 48-year-old German Caucasian woman presenting with hearing loss on the left side and vertigo. She had undergone three previous stapedectomies for hearing improvement. Reformatted high-resolution computed tomographic scanning and the patient's history confirmed the diagnosis of concurrent canal dehiscence syndrome. Conclusion Failure of hearing improvement after otosclerosis surgery may indicate an alternative underlying diagnosis which should be explored by further appropriate evaluation.

Eye size and visual acuity influence vestibular anatomy in mammals.

Science.gov (United States)

Kemp, Addison D; Christopher Kirk, E

2014-04-01

The semicircular canals of the inner ear detect head rotations and trigger compensatory movements that stabilize gaze and help maintain visual fixation. Mammals with large eyes and high visual acuity require precise gaze stabilization mechanisms because they experience diminished visual functionality at low thresholds of uncompensated motion. Because semicircular canal radius of curvature is a primary determinant of canal sensitivity, species with large canal radii are expected to be capable of more precise gaze stabilization than species with small canal radii. Here, we examine the relationship between mean semicircular canal radius of curvature, eye size, and visual acuity in a large sample of mammals. Our results demonstrate that eye size and visual acuity both explain a significant proportion of the variance in mean canal radius of curvature after statistically controlling for the effects of body mass and phylogeny. These findings suggest that variation in mean semicircular canal radius of curvature among mammals is partly the result of selection for improved gaze stabilization in species with large eyes and acute vision. Our results also provide a possible functional explanation for the small semicircular canal radii of fossorial mammals and plesiadapiforms. Copyright © 2014 Wiley Periodicals, Inc.

Socio-Hydrology of Channel Flows in Complex River Basins: Rivers, Canals, and Distributaries in Punjab, Pakistan

Science.gov (United States)

Wescoat, James L.; Siddiqi, Afreen; Muhammad, Abubakr

2018-01-01

This paper presents a socio-hydrologic analysis of channel flows in Punjab province of the Indus River basin in Pakistan. The Indus has undergone profound transformations, from large-scale canal irrigation in the mid-nineteenth century to partition and development of the international river basin in the mid-twentieth century, systems modeling in the late-twentieth century, and new technologies for discharge measurement and data analytics in the early twenty-first century. We address these processes through a socio-hydrologic framework that couples historical geographic and analytical methods at three levels of flow in the Punjab. The first level assesses Indus River inflows analysis from its origins in 1922 to the present. The second level shows how river inflows translate into 10-daily canal command deliveries that vary widely in their conformity with canal entitlements. The third level of analysis shows how new flow measurement technologies raise questions about the performance of established methods of water scheduling (warabandi) on local distributaries. We show how near real-time measurement sheds light on the efficiency and transparency of surface water management. These local socio-hydrologic changes have implications in turn for the larger scales of canal and river inflow management in complex river basins.

Multi-channel phase-equivalent transformation and supersymmetry

OpenAIRE

Shirokov, A. M.; Sidorenko, V. N.

2000-01-01

Phase-equivalent transformation of local interaction is generalized to the multi-channel case. Generally, the transformation does not change the number of the bound states in the system and their energies. However, with a special choice of the parameters, the transformation removes one of the bound states and is equivalent to the multi-channel supersymmetry transformation recently suggested by Sparenberg and Baye. Using the transformation, it is also possible to add a bound state to the discr...

The Buywell Way: seven essential practices of a highly successful multi-channel e-tailer

Directory of Open Access Journals (Sweden)

Mary Tate

2005-05-01

Full Text Available After the dot-com bust there is considerable evidence that multi-channel retailers are more successful than purely on-line retailers. Multi-channel retailing is becoming mainstream and considerable research exists on successful multi-channel strategies. Despite this, some organisations are having more success than others with their multi-channel approach. We talked to the management of one of Australasia’s most successful multi-channel apparel and home-ware retailers about the theory and practice of multi-channel retailing, with the aim of building on existing theory in multi-channel e-commerce.

Lipoatrofia semicircular: una revisión sistemática de la literatura Semicircular lipoatrophy: a sistematic review of the literature

Directory of Open Access Journals (Sweden)

Rafael Díaz Sarmiento

2011-03-01

Full Text Available Introducción: La lipoatrofia semicircular (LS es un trastorno benigno del tejido subcutáneo, de causa desconocida. Se caracteriza por depresiones semicirculares en la cara anterolateral de los muslos, unilaterales o bilaterales. Se relaciona con condiciones ambientales laborales, microtraumas repetidos y factores personales. Se plateó esta revisión sistemática de la literatura científica para caracterizar el conocimiento existente. Métodos: Revisión sistemática. Bases de datos: IBECS, IBSST, LILACS, IME, OSH-UPDATE, ISI-WOK, PubMed, CIS-DOC y Cochrane. Se incluyeron los artículos sobre lipoatrofia semicircular relacionada con condiciones de trabajo y medioambientales. Se utilizaron los niveles de evidencia científica del Scottish Intercollegiate Guidelines Network. Resultados: Se recuperaron 66 artículos. Solo 22 cumplieron los criterios de inclusión: Quince con nivel de evidencia 3 y 7 con nivel 4. Siete estudios de series de casos y ocho de casos únicos, sumaron 838 casos, informados entre 1982-2010. Los principales factores de riesgo para LS son: Microtraumas repetidos, humedad relativa baja y electricidad en los edificios modernos de oficinas. Las depresiones semicirculares ocurren en la cara anterolateral de muslos, sin alteración de la piel, en mujeres (85%, sin signos inflamatorios con histopatología inespecífica. La resonancia magnética, radiología y los anticuerpos antinucleares son negativos. El diagnóstico es clínico, apoyado con ecografía. El tratamiento psicológico y fisioterapia pueden ser útiles. Las medidas preventivas de mayor impacto son controlar los factores mencionados. Conclusiones: Existe insuficiente evidencia científica sobre las causas de LS. Es un trastorno prevalente, que genera alarma, relacionado con las condiciones de trabajo. Es necesario continuar la investigación sobre agentes causales.Introduction: The semicircular lipoatrophy (LS is a benign disorder of the subcutaneous tissue with

An optimal multi-channel memory controller for real-time systems

NARCIS (Netherlands)

Gomony, M.D.; Akesson, K.B.; Goossens, K.G.W.

2013-01-01

Optimal utilization of a multi-channel memory, such as Wide IO DRAM, as shared memory in multi-processor platforms depends on the mapping of memory clients to the memory channels, the granularity at which the memory requests are interleaved in each channel, and the bandwidth and memory capacity

Multi-channel imaging cytometry with a single detector

Science.gov (United States)

Locknar, Sarah; Barton, John; Entwistle, Mark; Carver, Gary; Johnson, Robert

2018-02-01

Multi-channel microscopy and multi-channel flow cytometry generate high bit data streams. Multiple channels (both spectral and spatial) are important in diagnosing diseased tissue and identifying individual cells. Omega Optical has developed techniques for mapping multiple channels into the time domain for detection by a single high gain, high bandwidth detector. This approach is based on pulsed laser excitation and a serial array of optical fibers coated with spectral reflectors such that up to 15 wavelength bins are sequentially detected by a single-element detector within 2.5 μs. Our multichannel microscopy system uses firmware running on dedicated DSP and FPGA chips to synchronize the laser, scanning mirrors, and sampling clock. The signals are digitized by an NI board into 14 bits at 60MHz - allowing for 232 by 174 pixel fields in up to 15 channels with 10x over sampling. Our multi-channel imaging cytometry design adds channels for forward scattering and back scattering to the fluorescence spectral channels. All channels are detected within the 2.5 μs - which is compatible with fast cytometry. Going forward, we plan to digitize at 16 bits with an A-toD chip attached to a custom board. Processing these digital signals in custom firmware would allow an on-board graphics processing unit to display imaging flow cytometry data over configurable scanning line lengths. The scatter channels can be used to trigger data buffering when a cell is present in the beam. This approach enables a low cost mechanically robust imaging cytometer.

Interference-aware power control for multi-radio multi-channel wireless mesh networks

CSIR Research Space (South Africa)

Olwal, TO

2009-09-01

Full Text Available are well known in [9], [6]. The operation of multi-radio multi-channel (MRMC) WMNs generally requires sustainable energy supply. Substantial deployments of WMNs have recently been witnessed in rural and remote communities [4]. In such applications...]. Power resources are dynamically adjusted by each NIC using intra and inter-subsystem (channel) states. Due to the decentralized nature, each MP assumes imperfect knowledge about the global network. Further we assume that there exists...

Determination of optimum "multi-channel surface wave method" field parameters.

Science.gov (United States)

2012-12-01

Multi-channel surface wave methods (especially the multi-channel analyses of surface wave method; MASW) are routinely used to : determine the shear-wave velocity of the subsurface to depths of 100 feet for site classification purposes. Users are awar...

Skyrmion-based multi-channel racetrack

Science.gov (United States)

Song, Chengkun; Jin, Chendong; Wang, Jinshuai; Xia, Haiyan; Wang, Jianbo; Liu, Qingfang

2017-11-01

Magnetic skyrmions are promising for the application of racetrack memories, logic gates, and other nano-devices, owing to their topologically protected stability, small size, and low driving current. In this work, we propose a skyrmion-based multi-channel racetrack memory where the skyrmion moves in the selected channel by applying voltage-controlled magnetic anisotropy gates. It is demonstrated numerically that a current-dependent skyrmion Hall effect can be restrained by the additional potential of the voltage-controlled region, and the skyrmion velocity and moving channel in the racetrack can be operated by tuning the voltage-controlled magnetic anisotropy, gate position, and current density. Our results offer a potential application of racetrack memory based on skyrmions.

Multi-Channel Maximum Likelihood Pitch Estimation

DEFF Research Database (Denmark)

Christensen, Mads Græsbøll

2012-01-01

In this paper, a method for multi-channel pitch estimation is proposed. The method is a maximum likelihood estimator and is based on a parametric model where the signals in the various channels share the same fundamental frequency but can have different amplitudes, phases, and noise characteristics....... This essentially means that the model allows for different conditions in the various channels, like different signal-to-noise ratios, microphone characteristics and reverberation. Moreover, the method does not assume that a certain array structure is used but rather relies on a more general model and is hence...

Multi-Channel Deconvolution for Forward-Looking Phase Array Radar Imaging

Directory of Open Access Journals (Sweden)

Jie Xia

2017-07-01

Full Text Available The cross-range resolution of forward-looking phase array radar (PAR is limited by the effective antenna beamwidth since the azimuth echo is the convolution of antenna pattern and targets’ backscattering coefficients. Therefore, deconvolution algorithms are proposed to improve the imaging resolution under the limited antenna beamwidth. However, as a typical inverse problem, deconvolution is essentially a highly ill-posed problem which is sensitive to noise and cannot ensure a reliable and robust estimation. In this paper, multi-channel deconvolution is proposed for improving the performance of deconvolution, which intends to considerably alleviate the ill-posed problem of single-channel deconvolution. To depict the performance improvement obtained by multi-channel more effectively, evaluation parameters are generalized to characterize the angular spectrum of antenna pattern or singular value distribution of observation matrix, which are conducted to compare different deconvolution systems. Here we present two multi-channel deconvolution algorithms which improve upon the traditional deconvolution algorithms via combining with multi-channel technique. Extensive simulations and experimental results based on real data are presented to verify the effectiveness of the proposed imaging methods.

Recent advances in Multi-Channel Algebraic Scattering

International Nuclear Information System (INIS)

Karataglidis, S.; Fraser, P. R.; Amos, K.; Canton, L.; Pisent, G.; Svenne, J. P.; Knijff, D. van der

2011-01-01

For coupled-channel descriptions of low-energy nucleon-induced interactions involving nuclei with particle-unstable exited states, it is necessary to include the widths of the target states. How those widths may affect the elastic scattering cross sections is examined within the framework of the Multi-Channel Algebraic Scattering (MCAS) method.

Evaluation of Multi-Channel ADCs for Gamma-Ray Spectroscopy

Science.gov (United States)

Tan, Hui; Hennig, Wolfgang; Walby, Mark D.; Breus, Dimitry; Harris, Jackson

2013-04-01

As nuclear physicists increasingly design large scale experiments with hundreds or thousands of detector channels, there are growing needs for high density readout electronics with good timing and energy resolution that at the same time offer lower cost per channel compared to existing commercial solutions. Recent improvements in the design of commercial analog to digital converters (ADCs) have resulted in a variety of multi-channel ADCs that are natural choice for designing such high density readout modules. However, multi-channel ADCs typically are designed for medical imaging/ultrasound applications and therefore are not rated for their spectroscopic characteristics. In this work, we evaluated the gamma-ray spectroscopic performance of several multi-channel ADCs, including their energy resolution, nonlinearity, and timing resolution. Some of these ADCs demonstrated excellent energy resolution, 2.66% FWHM at 662 keV with a LaBr3 or 1.78 keV FWHM at 1332.5 keV with a high purity germanium (HPGe) detector, and sub-nanosecond timing resolution with LaBr 3. We present results from these measurements to illustrate their suitability for gamma-ray spectroscopy.

Autonomous transmission power adaptation for multi-radio multi-channel wireless mesh networks

CSIR Research Space (South Africa)

Olwal, TO

2009-09-01

Full Text Available Multi-Radio Multi-Channel (MRMC) systems are key to power control problems in WMNs. Previous studies have emphasized through- put maximization in such systems as the main design challenge and transmission power control treated as a secondary issue...

Autonomous transmission power adaptation for multi-radio multi-channel wireless mesh networks

CSIR Research Space (South Africa)

Olwal, TO

2008-09-01

Full Text Available Multi-Radio Multi-Channel (MRMC) systems are key to power control problems in WMNs. Previous studies have emphasized throughput maximization in such systems as the main design challenge and transmission power control treated as a secondary issue...

Robust, highly customizable, and economical multi-channel electrode for chronic multi-unit recording in behaving animals.

Science.gov (United States)

Tateyama, Yukina; Oyama, Kei; Shiraishi, Masaru; Iijima, Toshio; Tsutsui, Ken-Ichiro

2017-12-01

Multi-unit recording has been one of the most widely used techniques to investigate the correlation between multiple neuronal activities and behavior. However, a common problem of currently used multi-channel electrodes is their physical weakness. In this study, we developed a novel multi-channel electrode with sufficient physical strength to penetrate a thickened dura mater. This electrode consists of low-cost materials and is easily fabricated, and it enables recording without removing dura mater, thereby reducing the risk of inflammation, infection, or brain herniation. The low-cost multi-channel electrode developed in this study would be a useful tool for chronic recording in behaving animals. Copyright © 2017. Published by Elsevier B.V.

[Multi-channel cochlear implants in patients with Mondini malformation].

Science.gov (United States)

Li, Yong-xin; Han, De-min; Zhao, Xiao-tian; Chen, Xue-qing; Kong, Ying; Zheng, Jun; Liu, Bo; Liu, Sha; Mo, Ling-yan; Zhang, Hua; Wang, Shuo

2004-02-01

To describe clinical experiences with multi-channel cochlear implantation in patients with Mondini malformation. Among 300 patients who received multi-channel cochlear implants from 1996 to 2002 in Beijing Tongren Hospital, 15 patients were diagnosed with Mondini malformation. A retrospective analysis was performed dealing with the surgical techniques, mapping and rehabilitations characteristics after surgery. 15 patients with normal cochlear structure are consider as control group. Gusher is found more common than the normal cochlear implantation, most of them are serious. The electrodes are inserted in the "cochleostomy" in full length of 13 Patients, 2 pairs of electrodes remains outside of "cochleostomy" in 2 patients. No serious complications occurred after implantation. All patients have auditory sensations. The impedance of the electrodes, the T level, C level and the hearing threshold are similar with the normal cochlear implantation group. The results have no significant difference in compare with normal cochlear group(P > 0.05). Multi-channel cochlear implantation could be performed safely in patients with Mondini malformation. The primary outcome for patients with Mondini malformation are similar to those with normal cochlear structure following the multi-channel cochlear implantation.

Multi-channel distributed coordinated function over single radio in wireless sensor networks.

Science.gov (United States)

Campbell, Carlene E-A; Loo, Kok-Keong Jonathan; Gemikonakli, Orhan; Khan, Shafiullah; Singh, Dhananjay

2011-01-01

Multi-channel assignments are becoming the solution of choice to improve performance in single radio for wireless networks. Multi-channel allows wireless networks to assign different channels to different nodes in real-time transmission. In this paper, we propose a new approach, Multi-channel Distributed Coordinated Function (MC-DCF) which takes advantage of multi-channel assignment. The backoff algorithm of the IEEE 802.11 distributed coordination function (DCF) was modified to invoke channel switching, based on threshold criteria in order to improve the overall throughput for wireless sensor networks (WSNs) over 802.11 networks. We presented simulation experiments in order to investigate the characteristics of multi-channel communication in wireless sensor networks using an NS2 platform. Nodes only use a single radio and perform channel switching only after specified threshold is reached. Single radio can only work on one channel at any given time. All nodes initiate constant bit rate streams towards the receiving nodes. In this work, we studied the impact of non-overlapping channels in the 2.4 frequency band on: constant bit rate (CBR) streams, node density, source nodes sending data directly to sink and signal strength by varying distances between the sensor nodes and operating frequencies of the radios with different data rates. We showed that multi-channel enhancement using our proposed algorithm provides significant improvement in terms of throughput, packet delivery ratio and delay. This technique can be considered for WSNs future use in 802.11 networks especially when the IEEE 802.11n becomes popular thereby may prevent the 802.15.4 network from operating effectively in the 2.4 GHz frequency band.

MIMO wireless networks channels, techniques and standards for multi-antenna, multi-user and multi-cell systems

CERN Document Server

Clerckx, Bruno

2013-01-01

This book is unique in presenting channels, techniques and standards for the next generation of MIMO wireless networks. Through a unified framework, it emphasizes how propagation mechanisms impact the system performance under realistic power constraints. Combining a solid mathematical analysis with a physical and intuitive approach to space-time signal processing, the book progressively derives innovative designs for space-time coding and precoding as well as multi-user and multi-cell techniques, taking into consideration that MIMO channels are often far from ideal. Reflecting developments

Range based power control for multi-radio multi-channel wireless mesh networks

CSIR Research Space (South Africa)

Olwal, TO

2009-08-01

Full Text Available Multi-Radio Multi-Channel (MRMC) systems are key to power control problems in Wireless Mesh Networks (WMNs). In this paper, researchers present a range based dynamic power control for MRMC WMNs. First, WMN is represented as a set of disjoint Unified...

Spatial coordination of compensatory eye movements in vertebrates: form and function.

Science.gov (United States)

Graf, W

1988-01-01

The semicircular canals of the labyrinth of vertebrates provide one way of motion detection in three-dimensional space. The fully developed form of the vertebrate labyrinth consists of six semicircular canals, three on each side of the head, whose spatial arrangement (vertical canals are placed diagonally in the head, horizontal canals are oriented earth horizontally) follows three interconnected principles: 1) bilateral symmetry, 2) push-pull operational mode, and 3) mutual orthogonality. Other sensory and motor systems related to vestibular reflexes, such as the extraocular muscles or the "optokinetic" coordinate axes encoded in the activity of the visually driven cells of the accessory optic system, share the same geometrical framework. This framework is also reflected in the anatomical networks mediating compensatory eye movements, linking each of the semicircular canals to a particular set of extraocular muscles (so-called principal vestibuloocular reflex connections to yoke muscles). These classical vestibulo-oculomotor relationships have been verified at many levels of the vertebrate hierarchy, including lateral- and frontal-eyed animals. The particular spatial orientation of the semicircular canals requires further comment and phylogenetic evaluation. The spatial arrangement of the vertical canals is already present in fossil ostracoderms, and is also exemplified in lampreys, the modern forms of once abundant agnathan species that populated the Silurian and Devonian oceans. The lampreys and ostracoderms lack horizontal canals, which appear later in all descendent vertebrates. The fully developed vertebrate labyrinth with its six semicircular canals displays distinct differences that are obvious when comparing distant taxa (e.g. elasmobranchs versus other vertebrates). Whereas the common crus of the semicircular canals in teleosts through mammals is formed between the anterior and the posterior semicircular canal, it occurs between the anterior and the

Integration of canal and otolith inputs by central vestibular neurons is subadditive for both active and passive self-motion: implication for perception.

Science.gov (United States)

Carriot, Jerome; Jamali, Mohsen; Brooks, Jessica X; Cullen, Kathleen E

2015-02-25

Traditionally, the neural encoding of vestibular information is studied by applying either passive rotations or translations in isolation. However, natural vestibular stimuli are typically more complex. During everyday life, our self-motion is generally not restricted to one dimension, but rather comprises both rotational and translational motion that will simultaneously stimulate receptors in the semicircular canals and otoliths. In addition, natural self-motion is the result of self-generated and externally generated movements. However, to date, it remains unknown how information about rotational and translational components of self-motion is integrated by vestibular pathways during active and/or passive motion. Accordingly, here, we compared the responses of neurons at the first central stage of vestibular processing to rotation, translation, and combined motion. Recordings were made in alert macaques from neurons in the vestibular nuclei involved in postural control and self-motion perception. In response to passive stimulation, neurons did not combine canal and otolith afferent information linearly. Instead, inputs were subadditively integrated with a weighting that was frequency dependent. Although canal inputs were more heavily weighted at low frequencies, the weighting of otolith input increased with frequency. In response to active stimulation, neuronal modulation was significantly attenuated (∼ 70%) relative to passive stimulation for rotations and translations and even more profoundly attenuated for combined motion due to subadditive input integration. Together, these findings provide insights into neural computations underlying the integration of semicircular canal and otolith inputs required for accurate posture and motor control, as well as perceptual stability, during everyday life. Copyright © 2015 the authors 0270-6474/15/353555-11$15.00/0.

Use of trapezoidal shaping algorithm in the digital multi-channel system

International Nuclear Information System (INIS)

Wang Jihong; Wang Lianghou; Fang Zongliang

2011-01-01

It discusses one kind of digital filter technology-trapezoidal algorithm based on actual need of studying the digital multi-channel. Firstly, demonstrating the feasibility of the arithmetic with theoretical analysis; secondly, predigesting the process of the arithmetic; thirdly, simulating with MATLAB; lastly, using the arithmetic to measure data. The result of testing indicates trapezoidal shaping algorithm accords with the need of digital multi-channel shaping extraordinary. The best filter can be obtained by means of setting parameter due to superiority of digital multi-channel. (authors)

[Necessity of repeated roll test in horizontal semicircular canalithasis positioned diagnosis].

Science.gov (United States)

Lu, H H; Zhao, Y; Chen, T S; Xu, K X; Wang, W; Liu, Q; Wen, C; Li, S S; Li, X J; Han, X; Lin, P

2016-04-07

To investigate the influence of repeated roll test in horizontal semicircular canalithasis(HSC-Can) positioned diagnosis, so as to investigate the cecessity of repeated roll test. The patients with a chief complaint of positional vertigo accepted two consecutive cycles roll test, the evoked nystagmus characteristics of each cycle recorded by video-nystagmuograph(VNG), whose direction, intensity, time and other parameters characteristics were analyzed in 51 HSC-Can. Horizontal nystagmus in the same direction with turning were induced in HSC-Can roll test. In 51 HSC-Can, roll test cycle 1 and cycle 2 induced nystagmus same strength side in 26 cases(51.0%), of which 19 cases with stronger nystagmus intensity in cycle 2, another 7 cases were weaker; the opposite strength side of the two loops induced nystagmus, and cycle 1 evoked nystagmus intensity were weaker than cycle 2, based on cycle 2 results determined HSC-Can affected side in 25 cases (49.0%). Lesion and normal side in cycle 1 induced nystagmus duration (x±s, the same below) were (13.4±11.5)s and (14.1±9.9)s, respectively intensity (18.1±22.4)°/s and (13.0±12.0)°/s; as in cycle 2 induced nystagmus duration was (20.7±10.2)s and (18.0±12.0)s, strength respectively(40.4±28.0)°/s and (15.6 ±11.2)°/s. Cycle 2 ipsilateral rotor position evoked nystagmus showed longer duration and stronger intensity than cycle 1. Between two cycle induced ipsilateral nystagmus duration, intensity differences were statistically significant (t values were -4.233 and -5.154, P=0.000). 51 HSC-Can patients, 44 patients selected repositioning maneuver, after 1-2 times of maneuver, 41 cases (93.2%) showed complete resolution of symptoms, all cases's symptoms were improved; other 7 patients selected medication only. The proposed suspicious HSC-Can patients should receive at least two cycles roll test, and mainly in the second cycle could determine the location of the responsible semicircular canals.

Experimental researches and comparison on aerodynamic parameters and cleaning efficiency of multi-level multi-channel cyclone

Directory of Open Access Journals (Sweden)

Aleksandras Chlebnikovas

2015-10-01

Full Text Available Multi-level multi-channel cyclone – the lately designed air cleaning device that can remove ultra-fine 20 μm particulatematter (PM from dusted air and reach over 95% of the overall cleaning efficiency. Multi-channel cyclone technology is based on centrifugal forces and has the resulting additional filtering process operation. Multi-level structure of cyclone allows to achieve higher air flow cleaning capacity at the same dimensions of the device, thus saving installation space required for the job, production and operating costs. Studies have examined the air flow parameters change in one–, two– and three–levels multichannel cyclone. These constructions differ according to the productivity of cleaned air under the constant peripheral and transitional (50/50 case air flow relations. Accordance with the results of air flow dynamics – velocity distribution of multi-channel cyclone, aerodynamic resistance and efficiency can be judged on the flow turbulence, the flow channel cross-section and select the most appropriate application. Cleaning efficiency studies were carried out using fine granite and wood ashes PM. The maximum cleaning efficiency was 93.3%, at an average of 4.5 g/m3, the aerodynamic resistance was equal to 1525 Pa.

MRI measurement for inner ear structures

International Nuclear Information System (INIS)

Li Shuling; Liu Huaijun; Chi Chen; Qin Ruiping; Shi Zhaoxia

2003-01-01

Objective: To reconstruct the image of inner ear by using 3D-FASE heavily T 2 WI, and to establish MRI measurement criterion of inner ear structures. Methods: One hundred and six inner ears of 53 healthy volunteers underwent MRI heavily T2-weighted axial scanning by using 3D fast advanced spin echo sequence. All the original images were transferred to an online workstation. Analyze AVW software was used for image post-processing. All the structures of inner ear were reconstructed, rotated from various angles and measured by using maximum intensity projection (MIP). Results: (1) All the structures of inner ear and internal auditory channel (IAC) could be visualized clearly by using 3D-FASE heavily T 2 WI. (2) Using analysis of variance, there was no age, side or race-related difference in inner ear volume, but it was bigger in male than in female [(0.242 ± 0.0236) mm 3 (male) versus (0.226 ± 0.021) mm 3 (female)]. There was no age, side-related differences in three semicircular canal height and vestibule vertical diameter, but, again, they were bigger in male than in female. The height of upper, lateral and posterior semicircular canal were (5.511 ± 0.626) mm (male) versus (5.167 ± 0.357) mm (female); (3.763 ± 0.495) mm (male) versus (3.446 ± 0.405) mm (female); (5.227 ± 0.547) mm (male) versus (4.786 ± 0.500) mm (female). There was no age, sex or side-related differences in three semicircular canal diameter and cochlea. The diameter of upper, lateral and posterior semicircular canal were (1.06 ± 0.119) mm, (1.14 ± 0.181) mm, and (1.22 ± 0.196)mm; the external diameter of cochlea basal turn was (6.520 ± 0.475) mm, the diameter of cochlea basal turn was (1.413 ± 0.144) mm, and cochlea height was (4.100 ± 0.405) mm. Conclusion: (1) For the first time, the MRI measurement criterion of inner ear structures is established. (2) Vestibule and three semicircular canal of inner ear are bigger in male than in female

Cerebellum Abnormalities, the 5th C in CHARGE Syndrome

NARCIS (Netherlands)

Wong, Tsz; de Geus, Christa; Meiners, Linda C; Sival, Deborah; Yu, Tian; Basson, M. Albert; Arts, Cornelia

Introduction and background: Children with CHARGE syndrome often have balance problems due to hypoplasia of the semicircular canals. Balance involves the complex task of integrating postural responses and multisensory (visual, labyrinthine from the semi-circular canals, and proprioceptive) feedback.

Topographical evaluation of the mandibular canal through panoramic radiograph

Directory of Open Access Journals (Sweden)

Ingrid Macedo Oliveira

2016-10-01

Full Text Available The mandibular canal is located inside the body of the mandible and may have anatomical variations. The topographic knowledge of the mandibular canal by the Dental surgeons is fundamental to achieving success in surgical planning, anesthetics and clinical interventions involving the jaw. To study the anatomy of the mandibular canal through panoramic radiographs. A retrospective descriptive study, developed after review and approval by the Ethics and Research Committee with the number of opinion 431095. Were analyzed 252 panoramic radiographs of patients of male and female attended in dental clinics UNINOVAFAPI University Center, Teresina-Pi, Brazil. The radiographs were analyzed with the aid of a light box and each antimere the jaw was observed separately. The classification of Nortjé and Langlais for description of the topography of the mandibular canal were used. Descriptive statistical analysis was performed with SPSS version 18.0. There was a prevalence of 38.89% in both antimeres, of mandibular channel the Type II. The type IV was present in 25.4% in the right hemi-arch and 26.6% on the left. Mandibular canal with unilateral bifurcation was observed in 0.77% of the sample and molar straight channel has not been identified. We observed anatomical variations as for the number and path, of the mandibular canal with the highest prevalence of Types II and IV, and the absence of bifurcations. Most was mandibular channels showed no bifurcation. The panoramic radiograph showed up an aid important to identify the mandibular canal and its variations.

Multiple-state based power control for multi-radio multi-channel wireless mesh networks

CSIR Research Space (South Africa)

Olwal, TO

2009-01-01

Full Text Available Multi-Radio Multi-Channel (MRMC) systems are key to power control problems in wireless mesh networks (WMNs). In this paper, we present asynchronous multiple-state based power control for MRMC WMNs. First, WMN is represented as a set of disjoint...

Empirical Study on Multi-Channel Service Quality and Customer Loyalty of Retailers

OpenAIRE

Qi Yong-zhi

2014-01-01

This paper studies the influence of offline RSSQ (retailing store service quality), online store ESQ (E-service quality) and O2O MCISQ (multi-channel integration service quality) on traditional retailers' customer loyalty as well as the relation of them three in multi-channel retailing. 380 customers with both offline and online shopping experience at the same retailer's store are investigated. Through the structural equation model, we find out that in multi-channel retailing, RSSQ and MCISQ ...

Multi-channel motor evoked potential monitoring during anterior cervical discectomy and fusion

Directory of Open Access Journals (Sweden)

Dong-Gun Kim

Full Text Available Objectives: Anterior cervical discectomy and fusion (ACDF surgery is the most common surgical procedure for the cervical spine with low complication rate. Despite the potential prognostic benefit, intraoperative neurophysiological monitoring (IONM, a method for detecting impending neurological compromise, is not routinely used in ACDF surgery. The present study aimed to identify the potential benefits of monitoring multi-channel motor evoked potentials (MEPs during ACDF surgery. Methods: We retrospectively reviewed 200 consecutive patients who received IONM with multi-channel MEPs and somatosensory evoked potentials (SSEPs. On average, 9.2 muscles per patient were evaluated under MEP monitoring. Results: The rate of MEP change during surgery in the multi-level ACDF group was significantly higher than the single-level group. Two patients from the single-level ACDF group (1.7% and four patients from the multi-level ACDF group (4.9% experienced post-operative motor deficits. Multi-channel MEPs monitoring during single and multi-level ACDF surgery demonstrated higher sensitivity, specificity, positive predictive and negative predictive value than SSEP monitoring. Conclusions: Multi-channel MEP monitoring might be beneficial for the detection of segmental injury as well as long tract injury during single- and multi-level ACDF surgery. Significance: This is first large scale study to identify the usefulness of multi-channel MEPs in monitoring ACDF surgery. Keywords: Disc disease, Somatosensory evoked potentials, Intraoperative neurophysiological monitoring, Motor evoked potentials, Anterior cervical discectomy and fusion

Intracranially protruded bilateral posterior and superior SCCs with multiple dehiscences in a patient with positional vertigo: CT and MR imaging findings and review of literature

International Nuclear Information System (INIS)

Kundaragi, Nischal G; Mudali, Srinivasa; Karpagam, Bulabai; Priya, Rathna

2014-01-01

We report a rare case of intracranially protruded posterior and superior semicircular canals beyond the margins of temporal bone with bony roof dehiscence in bilateral posterior and left superior semicircular canals in a patient with benign paroxysmal positional vertigo (BPPV)

Energy reduction using multi-channels optical wireless communication based OFDM

Science.gov (United States)

Darwesh, Laialy; Arnon, Shlomi

2017-10-01

In recent years, an increasing number of data center networks (DCNs) have been built to provide various cloud applications. Major challenges in the design of next generation DC networks include reduction of the energy consumption, high flexibility and scalability, high data rates, minimum latency and high cyber security. Use of optical wireless communication (OWC) to augment the DC network could help to confront some of these challenges. In this paper we present an OWC multi channels communication method that could lead to significant energy reduction of the communication equipment. The method is to convert a high speed serial data stream to many slower and parallel streams and vies versa at the receiver. We implement this concept of multi channels using optical orthogonal frequency division multiplexing (O-OFDM) method. In our scheme, we use asymmetrically clipped optical OFDM (ACO-OFDM). Our results show that the realization of multi channels OFDM (ACO-OFDM) methods reduces the total energy consumption exponentially, as the number of channels transmitted through them rises.

A multi-channel humidity control system based on LabVIEW

International Nuclear Information System (INIS)

Zhang Aiwu; Xie Yuguang; Liu Hongbang; Liu Yingbiao; Cai Xiao; Yu Boxiang; Lu Junguang; Zhou Li

2011-01-01

A real time multi-channel humidity control system was designed based on LabVIEW, using the dry air branch of BESⅢ drying system. The hardware of this control system consist of mini humidity and temperature sensors, intelligent collection module, switch quantity controller and electromagnetic valves. The humidity can be controlled at arbitrary value from air humidity to 3% with accuracy better than 2%. Multi microenvironment with different humidity can be easily controlled and monitored in real time by this system. It can also be extended to hybrid control of multi channel humidity and temperature. (authors)

The Dix-Hallpike test and the canalith repositioning maneuver.

Science.gov (United States)

Viirre, Erik; Purcell, Ian; Baloh, Robert W

2005-01-01

The Dix-Hallpike test and the canalith repositioning maneuver (CRM) are used to diagnose and treat benign positional vertigo (BPV). Dix-Hallpike is the standard procedure for diagnosis of BPV, but if the horizontal canal is not tested for BPV and the Dix-Hallpike is only carried out once, the condition may not be diagnosed and appropriately treated. We describe our method of testing for BPV and treating it with CRM. The Dix-Hallpike test involves rapidly moving the patient from a sitting position to "head hanging," where the patient's head is at least 10 degrees below horizontal. This is performed initially for the posterior semicircular canals. If these movements fail to elicit vertigo and nystagmus, tests of the horizontal semicircular canals are performed by laying the patient on each side. Importantly, if there is no vertigo or nystagmus elicited by testing the horizontal semi-circular canals, the posterior semicircular canals are tested again. It appears that being held in the head hanging positions and then left and right lateral positions will often allow the canaliths to collect such that the Dix-Hallpike test will become positive. Failure to repeat the tests of the posterior semicircular canals may result in a falsely negative test. Testing the horizontal canals and repeating the Dix-Hallpike test will reduce the likelihood of patients undergoing extra testing or other consequences of misdiagnosis. If, during any of this testing, a movement elicits vertigo or nystagmus, the appropriate CRM is then carried out.

Simulation study on vertically distributed multi-channel tangential interferometry for KSTAR

International Nuclear Information System (INIS)

Nam, Y U; Juhn, J W

2012-01-01

Interferometry is powerful and reliable diagnostics which measures line-integrated electron density. Since this technique only measures an averaged value over whole probing line, a multi-channel scheme is used for an analysis for spatial distribution and variation of electron density. Typical setups of the multi-channel measurement are schemes of radially distributed vertical lines, vertically distributed horizontal lines and horizontally distributed tangential lines. In Korea Superconducting Tokamak Advanced Research, a vertically distributed multi-channel tangential interferometry is planned instead of above typical schemes due to limitation of complex in-vessel geometry and narrow diagnostics port through cryostat. Total 5-channels will be vertically placed as symmetric with the mid-plain. One of the characteristic features of the vertically distributed channels is that each channel is viewing different poloidal angle, while the horizontally distributed channels are viewing different toroidal angle. This scheme also can be used on an investigation of the up-down asymmetry and the vertical oscillation of plasma. Simulation has been performed and the result will be discussed to verify the possibility and the estimated effectiveness of the scheme on this paper.

The delayed rectifier, IKI, is the major conductance in type I vestibular hair cells across vestibular end organs

Science.gov (United States)

Ricci, A. J.; Rennie, K. J.; Correia, M. J.

1996-01-01

Hair cells were dissociated from the semicircular canal, utricle, lagena and saccule of white king pigeons. Type I hair cells were identified morphologically based on the ratios of neck width to cuticular plate width (NPR rectifier characterized previously in semicircular canal hair cells as IKI.

Comparative analysis of vestibular ecomorphology in birds.

Science.gov (United States)

Benson, Roger B J; Starmer-Jones, Ethan; Close, Roger A; Walsh, Stig A

2017-12-01

The bony labyrinth of vertebrates houses the semicircular canals. These sense rotational accelerations of the head and play an essential role in gaze stabilisation during locomotion. The sizes and shapes of the semicircular canals have hypothesised relationships to agility and locomotory modes in many groups, including birds, and a burgeoning palaeontological literature seeks to make ecological interpretations from the morphology of the labyrinth in extinct species. Rigorous tests of form-function relationships for the vestibular system are required to support these interpretations. We test the hypothesis that the lengths, streamlines and angles between the semicircular canals are related to body size, wing kinematics and flying style in birds. To do this, we applied geometric morphometrics and multivariate phylogenetic comparative methods to a dataset of 64 three-dimensional reconstructions of the endosseous labyrinth obtained using micro-computed tomography scanning of bird crania. A strong relationship between centroid size of the semicircular canals and body size indicates that larger birds have longer semicircular canals compared with their evolutionary relatives. Wing kinematics related to manoeuvrability (and quantified using the brachial index) explain a small additional portion of the variance in labyrinth size. We also find strong evidence for allometric shape change in the semicircular canals of birds, indicating that major aspects of the shape of the avian labyrinth are determined by spatial constraints. The avian braincase accommodates a large brain, a large eye and large semicircular canals compared with other tetrapods. Negative allometry of these structures means that the restriction of space within the braincase is intense in small birds. This may explain our observation that the angles between planes of the semicircular canals of birds deviate more strongly from orthogonality than those of mammals, and especially from agile, gliding and flying

Clinical review of inner ear malformation

International Nuclear Information System (INIS)

Kokai, Hiromi; Oohashi, Masami; Ishikawa, Kazuo; Harada, Kouji; Hiratsuka, Hitoshi; Ogasawara, Makoto; Miyashita, Souji; Terayama, Yoshihiko

2003-01-01

We had 126 patients with inner ear malformation diagnosed with temporal bone computed tomography (CT) scans at Azabu Triology Hospital between 1996 and 2002. We classified cases of inner ear malformation according to Jackler et al. The incidence of inner ear malformation in our series was as follows; labyrinthine anomalies 61% (isolated lateral semicircular canal dysplasia 56%, compound semicircular canal dysplasia 4%, semicircular canal aplasia 1%), cochlear anomalies 24%, enlargement of the vestibular aqueduct 12%, narrow internal auditory canal 2%, complete labyrinthine aplasia 1%, enlargement of the cochlear aqueduct 0%. The most frequent anomaly was isolated lateral semicircular canal dysplasia. We did not detect any significant clinical features in this anomaly. There were 2 patients with cochlear anomalies who had past histories of meningitis. Some patients with enlargement of the vestibular aqueduct had frequent attacks of fluctuating hearing. Clinically it is important to detect patients with inner ear malformation such as cochlear anomalies and enlargement of the vestibular aqueduct usually accompanied by congenital sensorineural hearing loss. For patients with congenital sensorineural hearing loss, we recommend temporal bone CT scan. (author)

Multi-Channel Capacitive Sensor Arrays

Directory of Open Access Journals (Sweden)

Bingnan Wang

2016-01-01

Full Text Available In this paper, multi-channel capacitive sensor arrays based on microstrip band-stop filters are studied. The sensor arrays can be used to detect the proximity of objects at different positions and directions. Each capacitive sensing structure in the array is connected to an inductive element to form resonance at different frequencies. The resonances are designed to be isolated in the frequency spectrum, such that the change in one channel does not affect resonances at other channels. The inductive element associated with each capacitive sensor can be surface-mounted inductors, integrated microstrip inductors or metamaterial-inspired structures. We show that by using metamaterial split-ring structures coupled to a microstrip line, the quality factor of each resonance can be greatly improved compared to conventional surface-mounted or microstrip meander inductors. With such a microstrip-coupled split-ring design, more sensing elements can be integrated in the same frequency spectrum, and the sensitivity can be greatly improved.

Multi-channel data acquisition and processing system for moessbauer spectroscopy

International Nuclear Information System (INIS)

Jin Ge; Yang Yanming

1987-01-01

A multi-channel data acquisition and processing system for moessbauer spectroscopy is described, which consists of an intelligent interface and a BC3-80 microcomputer. The system has eight data channels, each channel contains a counting circuit and a memory. A Z80-CPU is used as a main unit for control and access. The microcomputer is used for real-time displaying spectrum, saving the data to disk, printing data and data processing. The system is applicable to a high counting rate multi-wire proportional chamber. It can increase greatly the counting rate for measuring moessbauer spectrum. The signals of each wire in the chamber go through a corresponding amplifier and a differential discriminator and are recorded by a corresponding data channel, the data of each channel is added by the microcomputer. In addition, two channels can be used to measure an absorption and a scattering spectrum at the same time and the internal and the surface information of the sample are obtained simultaneously

Lattice Boltzmann simulation of immiscible displacement in the cavity with different channel configurations

Science.gov (United States)

Lou, Qin; Zang, Chenqiang; Yang, Mo; Xu, Hongtao

In this work, the immiscible displacement in a cavity with different channel configurations is studied using an improved pseudo-potential lattice Boltzmann equation (LBE) model. This model overcomes the drawback of the dependence of the fluid properties on the grid size, which exists in the original pseudo-potential LBE model. The approach is first validated by the Laplace law. Then, it is employed to study the immiscible displacement process. The influences of different factors, such as the surface wettability, the distance between the gas cavity and liquid cavity and the surface roughness of the channel are investigated. Numerical results show that the displacement efficiency increases and the displacement time decreases with the increase of the surface contact angle. On the other hand, the displacement efficiency increases with increasing distance between the gas cavity and the liquid cavity at first and finally reaches a constant value. As for the surface roughness, two structures (a semicircular cavity and a semicircular bulge) are studied. The comprehensive results show that although the displacement processes for both the structures depend on the surface wettability, they present quite different behaviors. Specially, for the roughness structure constituted by the semicircular cavity, the displacement efficiency decreases and displacement time increases evidently with the size of the semicircular cavity for the small contact angle. The trend slows down as the increase of the contact angle. Once the contact angle exceeds a certain value, the size of the semicircular cavity almost has no influence on the displacement process. While for the roughness structure of a semicircular bulge, the displacement efficiency increases with the size of bulge first and then it decreases for the small contact angle. The displacement efficiency increases first and finally reaches a constant for the large contact angle. The results also show that the displacement time has an

The molecular mechanism of multi-ion conduction in K{sup +} channels

Energy Technology Data Exchange (ETDEWEB)

Gwan, J.F.

2007-01-19

Steered molecular dynamics (SMD) simulation method is applied to a fully solvated membrane-channel model for studying the ion permeation process in potassium channels. The channel model is based on the crystallographic structure of a prokaryotic K{sup +} channel- the KcsA channel, which is a representative of most known eukaryotic K{sup +} channels. It has long been proposed that the ion transportation in a conventional K{sup +}-channel follows a multi-ion fashion: permeating ions line in a queue in the channel pore and move in a single file through the channel. The conventional view of multi-ion transportation is that the electrostatic repulsion between ions helps to overcome the attraction between ions and the channel pore. In this study, we proposed two SMD simulation schemes, referred to 'the single-ion SMD' simulations and 'the multi-ion SMD' simulations. Concerted movements of a K-W-K sequence in the selectivity filter were observed in the single-ion SMD simulations. The analysis of the concerted movement reveals the molecular mechanism of the multi-ion transportation. It shows that, rather than the long range electrostatic interaction, the short range polar interaction is a more dominant factor in the multi-ion transportation. The polar groups which play a role in the concerted transportation are the water molecules and the backbone carbonyl groups of the selectivity filter. The polar interaction is sensitive to the relative orientation of the polar groups. By changing the orientation of a polar group, the interaction may switch from attractive to repulsive or vice versa. By this means, the energy barrier between binding sites in the selectivity filter can be switched on and off, and therefore the K{sup +} may be able to move to the neighboring binding site without an external driving force. The concerted transportation in the selectivity filter requires a delicate cooperation between K{sup +}, waters, and the backbone carbonyl groups. To

Exploiting Multi-user Diversity and Multi-hop Diversity in Dual-hop Broadcast Channels

KAUST Repository

Zafar, Ammar

2013-05-21

We propose joint user-and-hop scheduling over dual-hop block-fading broadcast channels in order to exploit multi-user diversity gains and multi-hop diversity gains all together. To achieve this objective, the first and second hops are scheduled opportunistically based on the channel state information. The joint scheduling problem is formulated as maximizing the weighted sum of the long term achievable rates of the users under a stability constraint, which means that in the long term the rate received by the relay should equal the rate transmitted by it, in addition to power constraints. We show that this problem is equivalent to a single-hop broadcast channel by treating the source as a virtual user with an optimal weight that maintains the stability constraint. We show how to obtain the source weight either off-line based on channel statistics or on real-time based on channel measurements. Furthermore, we consider special cases including the maximum sum-rate scheduler and the proportional fair scheduler. We also show how to extend the scheme into one that allows multiple user scheduling via superposition coding with successive decoding. Numerical results demonstrate that our proposed joint scheduling scheme enlarges the rate region as compared to scheduling schemes that exploit the diversity gains partially.

A multi-channel isolated power supply in non-equipotential circuit

Science.gov (United States)

Li, Xiang; Zhao, Bo-Wen; Zhang, Yan-Chi; Xie, Da

2018-04-01

A multi-channel isolation power supply is designed for the problems of different MOSFET or IGBT in the non-equipotential circuit in this paper. It mainly includes the square wave generation circuit, the high-frequency transformer and the three-terminal stabilized circuit. The first part is used to generate the 24V square wave, and as the input of the magnetic ring transformer. In the second part, the magnetic ring transformer consists of one input and three outputs to realize multi-channel isolation output. The third part can output different potential and realize non-equal potential function through the three-terminal stabilized chip. In addition, the multi-channel isolation power source proposed in this paper is Small size, high reliability and low price, and it is convenient for power electronic switches that operate on multiple different potentials. Therefore, the research on power supply of power electronic circuit has practical significance.

Diseño de conexiones mecánicas tipo canal en vigas compuestas bajo fuego//Design of channel mechanical connections in composite beam in

Directory of Open Access Journals (Sweden)

Yisel Larrua‐Pardo

2015-01-01

Full Text Available En este trabajo se propusieron dos métodos, uno simplificado y otro gráfico alternativo para el diseño de la conexión mecánica tipo canal en vigas compuestas de hormigón y acero en situación de incendio, a partir del estudio de su comportamiento. Se utilizó como herramienta la modelación numérica. El método simplificado desarrollado considera temperaturas definidas a través de la modelación térmica del ensayo push-out en situación de incendio y es coherente con las expresiones de diseño de las conexiones mecánicas tipo canal a temperatura ambiente y la formulación existente para el diseño de las conexiones tipo perno a elevadas temperaturas. El método gráfico alternativopropuesto constituye una opción que permite obtener de una forma directa y rápida, la resistencia a elevadas temperaturas de la conexión mecánica tipo canal para un tiempo de resistencia al fuego, en función de su resistencia a temperatura ambiente.Palabras claves: conexión mecánica tipo canal, método simplificado, método gráfico alternativo, modelación numérica, incendio._______________________________________________________________________________AbstractIn this paper two methods to design of channel mechanical connection are proposed, a simplified one and graphical alternative another, both using the numerical analysis for the study of the mechanical connection behavior. The developed simplified method considers temperatures defined through thethermal modelling of the push-out test in fire and it is coherent with the design expressions of the channel mechanical connections to ambient temperature, and the current formulation for the design of the stud connections al elevated temperatures. The proposed alternative graphical method constitutes an option that allows obtaining, in a direct and quick way, the resistance to elevatedtemperatures of the channel mechanical connections for a determined time of resistance to the fire, according to its

Research on digital multi-channel pulse height analysis techniques

International Nuclear Information System (INIS)

Xiao Wuyun; Wei Yixiang; Ai Xianyun; Ao Qi

2005-01-01

Multi-channel pulse height analysis techniques are developing in the direction of digitalization. Based on digital signal processing techniques, digital multi-channel analyzers are characterized by powerful pulse processing ability, high throughput, improved stability and flexibility. This paper analyzes key techniques of digital nuclear pulse processing. With MATLAB software, main algorithms are simulated, such as trapezoidal shaping, digital baseline estimation, digital pole-zero/zero-pole compensation, poles and zeros identification. The preliminary general scheme of digital MCA is discussed, as well as some other important techniques about its engineering design. All these lay the foundation of developing homemade digital nuclear spectrometers. (authors)

Metasurface for multi-channel terahertz beam splitters and polarization rotators

Science.gov (United States)

Zang, XiaoFei; Gong, HanHong; Li, Zhen; Xie, JingYa; Cheng, QingQing; Chen, Lin; Shkurinov, Alexander P.; Zhu, YiMing; Zhuang, SongLin

2018-04-01

Terahertz beam splitters and polarization rotators are two typical devices with wide applications ranging from terahertz communication to system integration. However, they are faced with severe challenges in manipulating THz waves in multiple channels, which is desirable for system integration and device miniaturization. Here, we propose a method to design ultra-thin multi-channel THz beam splitters and polarization rotators simultaneously. The reflected beams are divided into four beams with nearly the same density under illumination of linear-polarized THz waves, while the polarization of reflected beams in each channel is modulated with a rotation angle or invariable with respect to the incident THz waves, leading to the multi-channel polarization rotator (multiple polarization rotation in the reflective channels) and beam splitter, respectively. Reflective metasurfaces, created by patterning metal-rods with different orientations on a polyimide film, were fabricated and measured to demonstrate these characteristics. The proposed approach provides an efficient way of controlling polarization of THz waves in various channels, which significantly simplifies THz functional devices and the experimental system.

CANAL code

International Nuclear Information System (INIS)

Gara, P.; Martin, E.

1983-01-01

The CANAL code presented here optimizes a realistic iron free extraction channel which has to provide a given transversal magnetic field law in the median plane: the current bars may be curved, have finite lengths and cooling ducts and move in a restricted transversal area; terminal connectors may be added, images of the bars in pole pieces may be included. A special option optimizes a real set of circular coils [fr

New-fashioned Multi-channel Analyzer Based on Bipartition Method

International Nuclear Information System (INIS)

Liu Mingjian; Zhang Yan; Yan Xuekun; Chen Ying

2009-01-01

A new-fashioned digital-analog converter (DAC) which can find the pulse-signal amplitude through dichotomy is devised. With this new DAC method, a 256-channel multi-channel pulse amplitude analyzer (MCA) is designed successfully, and its hardware and software are introduced in detail. This provides a new method for designing MCA. (authors)

Automatic pickup of arrival time of channel wave based on multi-channel constraints

Science.gov (United States)

Wang, Bao-Li

2018-03-01

Accurately detecting the arrival time of a channel wave in a coal seam is very important for in-seam seismic data processing. The arrival time greatly affects the accuracy of the channel wave inversion and the computed tomography (CT) result. However, because the signal-to-noise ratio of in-seam seismic data is reduced by the long wavelength and strong frequency dispersion, accurately timing the arrival of channel waves is extremely difficult. For this purpose, we propose a method that automatically picks up the arrival time of channel waves based on multi-channel constraints. We first estimate the Jaccard similarity coefficient of two ray paths, then apply it as a weight coefficient for stacking the multichannel dispersion spectra. The reasonableness and effectiveness of the proposed method is verified in an actual data application. Most importantly, the method increases the degree of automation and the pickup precision of the channel-wave arrival time.

Multi-channel service concept design and prototyping

NARCIS (Netherlands)

Sperling, C.P.; Simons, L.P.A.; Bouwman, W.A.G.A.

2007-01-01

Designing e-services which have to function in a multi-channel context has proved to be challenging for organizations. Previous research has shown that structured design methods are useful to structure the design process. In this paper we proceed from an existing method (which identifies

EDMC: An enhanced distributed multi-channel anti-collision algorithm for RFID reader system

Science.gov (United States)

Zhang, YuJing; Cui, Yinghua

2017-05-01

In this paper, we proposes an enhanced distributed multi-channel reader anti-collision algorithm for RFID environments which is based on the distributed multi-channel reader anti-collision algorithm for RFID environments (called DiMCA). We proposes a monitor method to decide whether reader receive the latest control news after it selected the data channel. The simulation result shows that it improves interrogation delay.

The Suez Canal and the petroleum harbors

International Nuclear Information System (INIS)

Anon.

1997-01-01

The Suez Canal is the second longest channel in the world and allows to save 60% of the travel time between the petroleum harbors of the Arabic peninsula and Europe. This short paper gives a summary of the main petroleum harbors activity along the channel from the Red sea to the Mediterranean sea. (J.S.)

Analysis of flow distribution instability in parallel thin rectangular multi-channel system

Energy Technology Data Exchange (ETDEWEB)

Xia, G.L. [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an City 710049 (China); Fundamental Science on Nuclear Safety and Simulation Technology Laboratory, Harbin Engineering University, Harbin City 150001 (China); Su, G.H., E-mail: ghsu@mail.xjtu.edu.cn [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an City 710049 (China); Peng, M.J. [Fundamental Science on Nuclear Safety and Simulation Technology Laboratory, Harbin Engineering University, Harbin City 150001 (China)

2016-08-15

Highlights: • Flow distribution instability in parallel thin rectangular multi-channel system is studied using RELAP5 codes. • Flow excursion may bring parallel heating channel into the density wave oscillations region. • Flow distribution instability is more likely to happen at low power/flow ratio conditions. • The increase of channel number will not affect the flow distribution instability boundary. • Asymmetry inlet throttling and heating will make system more unstable. - Abstract: The flow distribution instability in parallel thin rectangular multi-channel system has been researched in the present study. The research model of parallel channel system is established by using RELAP5/MOD3.4 codes. The transient process of flow distribution instability is studied at imposed inlet mass flow rate and imposed pressure drop conditions. The influence of heating power, mass flow rate, system pressure and channel number on flow distribution instability are analyzed. Furthermore, the flow distribution instability of parallel two-channel system under asymmetric inlet throttling and heating power is studied. The results show that, if multi-channel system operates at the negative slope region of channel ΔP–G curve, small disturbance in pressure drop will lead to flow redistribution between parallel channels. Flow excursion may bring the operating point of heating channel into the density-wave oscillations region, this will result in out-phase or in-phase flow oscillations. Flow distribution instability is more likely to happen at low power/flow ratio conditions, the stability of parallel channel system increases with system pressure, the channel number has a little effect on system stability, but the asymmetry inlet throttling or heating power will make the system more unstable.

Channel Selection Policy in Multi-SU and Multi-PU Cognitive Radio Networks with Energy Harvesting for Internet of Everything

Directory of Open Access Journals (Sweden)

Feng Hu

2016-01-01

Full Text Available Cognitive radio, which will become a fundamental part of the Internet of Everything (IoE, has been identified as a promising solution for the spectrum scarcity. In a multi-SU and multi-PU cognitive radio network, selecting channels is a fundamental problem due to the channel competition among secondary users (SUs and packet collision between SUs and primary users (PUs. In this paper, we adopt cooperative sensing method to avoid the packet collision between SUs and PUs and focus on how to collect the spectrum sensing data of SUs for cooperative sensing. In order to reduce the channel competition among SUs, we first consider the hybrid transmission model for single SU where a SU can opportunistically access both idle channels operating either the Overlay or the Underlay model and the busy channels by using the energy harvesting technology. Then we propose a competitive set based channel selection policy for multi-SU where all SUs competing for data transmission or energy harvesting in the same channel will form a competitive set. Extensive simulations show that the proposed cooperative sensing method and the channel selection policy outperform previous solutions in terms of false alarm, average throughput, average waiting time, and energy harvesting efficiency of SUs.

Revisión del estado del arte deIR-Ultra-Wideband y simulación de la respuesta impulsiva del canal IEEE802.15.4a Review of the state of art of IR-Ultra-Wideband and simulation of Impulse Responce of the IEEE 802.15.4a channel

Directory of Open Access Journals (Sweden)

Julio Suárez Páez

2010-06-01

Full Text Available Este artículo realiza una revisión del estado del arte de la tecnología basada en canales de Banda Ultra Ancha (UWB, Ultra–Wideband enfocándose en su regulación, estandarización, aplicaciones básicas, modelo de canal IEEE 802.15.4a y simulación de la respuesta impulsiva de este tipo de canal. También se pretende introducir al lector en las tecnologías basadas en canales IR–UWB y en los parámetros para el modelamiento y simulación del canal UWB IEEE 802.15.4a.This paper reviews the state of the art of the technology based in channels of Ultra Wide band (UWB Ultra–Wideband focusing on its regulation, standardization, basic applications, IEEE 802.15.4a channel model and simulation of the impulsive response of this type of channel. Also, it aims to introduce the reader to the technologies based on IR–UWB channels and the parameters for modeling and simulation of IEEE 802.15.4a UWB channel.

Multi-channel fiber optic dew and humidity sensor

Science.gov (United States)

Limodehi, Hamid E.; Mozafari, Morteza; Amiri, Hesam; Légaré, François

2018-03-01

In this article, we introduce a multi-channel fiber optic dew and humidity sensor which works using a novel method based on relation between surface plasmon resonance (SPR) and water vapor condensation. The proposed sensor can instantly detect moisture or dew formation through its fiber optic channels, separately situated in different places. It enables to simultaneously measure the ambient Relative Humidity (RH) and dew point temperature of several environments with accuracy of 5%.

Pre-experiment testing of the Multi Channel Systems 16-channel preamplifier CPA16

International Nuclear Information System (INIS)

Patin, J B; Stoyer, M A; Moody, K J; Friensehner, A V

2003-01-01

The 16-channel preamplifier model CPA16 from Multi Channel Systems was studied. The CPA16 preamplifier/amplifier module is a candidate to be used as the preamplifiers and amplifiers for the focal plane detectors of the Mass Analyzer of Super Heavy Atoms (MASHA). The equipment used to test the CPA16, the results of testing the CPA16 with a pulser, a mixed 229 Th/ 148 Gd source and a 252 Cf source, and a summary of the results will be presented

Digital Multi Channel Analyzer Enhancement

International Nuclear Information System (INIS)

Gonen, E.; Marcus, E.; Wengrowicz, U.; Beck, A.; Nir, J.; Sheinfeld, M.; Broide, A.; Tirosh, D.

2002-01-01

A cement analyzing system based on radiation spectroscopy had been developed [1], using novel digital approach for real-time, high-throughput and low-cost Multi Channel Analyzer. The performance of the developed system had a severe problem: the resulted spectrum suffered from lack of smoothness, it was very noisy and full of spikes and surges, therefore it was impossible to use this spectrum for analyzing the cement substance. This paper describes the work carried out to improve the system performance

Regret of Multi-Channel Bandit Game in Cognitive Radio Networks

Directory of Open Access Journals (Sweden)

Ma Jun

2016-01-01

Full Text Available The problem of how to evaluate the rate of convergence to Nash equilibrium solutions in the process of channel selection under incomplete information is studied. In this paper, the definition of regret is used to reflect the convergence rates of online algorithms. The process of selecting an idle channel for each secondary user is modeled as a multi-channel bandit game. The definition of the maximal averaged regret is given. Two existing online learning algorithms are used to obtain the Nash equilibrium for each SU. The maximal averaged regrets are used to evaluate the performances of online algorithms. When there is a pure strategy Nash equilibrium in the multi-channel bandit game, the maximal averaged regrets are finite. A cooperation mechanism is also needed in the process of calculating the maximal averaged regrets. Simulation results show the maximal averaged regrets are finite and the online algorithm with greater convergence rate has less maximal averaged regrets.

BENIGN PAROXYSMAL POSITIONAL VERTIGO (BPPV) — A ...

African Journals Online (AJOL)

Enrique

OVERVIEW OF SEMICIRCULAR CANAL FUNCTION. The three semicircular canals are arranged at right angles to each other in the inner ear ... nerve is stimulated, resulting in the brain sensing the head movement (Fig. 1). PATRICK DE .... The Dix-Hallpike test to the left (A — patient seated on couch, B — head. 45° to side ...

Canal + Spain & Live Football Broadcasts: A Whole Different Game

NARCIS (Netherlands)

Rodríguez Ortega, Vicente; Romero Santos, Rubén

2017-01-01

textabstractIn 1988 the Law for Private Television Broadcasting was approved by Spanish parliament. Three licenses were initially awarded. Soon thereafter, in 1990, three channels started broadcasting: Antena 3, Berlusconi-related Tele 5 and, against all odds, a pay channel, Canal + Spain. This

Software filtering method to suppress spike pulse interference in multi-channel scaler

International Nuclear Information System (INIS)

Huang Shun; Zhao Xiuliang; Li Zhiqiang; Zhao Yanhui

2008-01-01

In the test on anti-jamming function of a multi-channel scaler, we found that the spike pulse interference on the second level counter caused by the motor start-stop operations brings a major count error. There are resolvable characteristics between effective signal and spike pulse interference, and multi-channel hardware filtering circuit is too huge and can't filter thoroughly, therefore we designed a software filtering method. In this method based on C8051F020 MCU, we dynamically store sampling values of one channel in only a one-byte variable and distinguish the rise-trail edge of a signal and spike pulse interference because of value changes of the variable. Test showed that the filtering software method can solve the error counting problem of the multi-channel scaler caused by the motor start-stop operations. The flow chart and source codes of the method were detailed in this paper. (authors)

Influence of vestibular activation on respiration in humans

Science.gov (United States)

Monahan, Kevin D.; Sharpe, Melissa K.; Drury, Daniel; Ertl, Andrew C.; Ray, Chester A.

2002-01-01

The purpose of this study was to determine the effects of the semicircular canals and otolith organs on respiration in humans. On the basis of animal studies, we hypothesized that vestibular activation would elicit a vestibulorespiratory reflex. To test this hypothesis, respiratory measures, arterial blood pressure, and heart rate were measured during engagement of semicircular canals and/or otolith organs. Dynamic upright pitch and roll (15 cycles/min), which activate the otolith organs and semicircular canals, increased respiratory rate (Delta2 +/- 1 and Delta3 +/- 1 breaths/min, respectively; P < 0.05). Dynamic yaw and lateral pitch (15 cycles/min), which activate the semicircular canals, increased respiration similarly (Delta3 +/- 1 and Delta2 +/- 1, respectively; P < 0.05). Dynamic chair rotation (15 cycles/min), which mimics dynamic yaw but eliminates neck muscle afferent, increased respiration (Delta3 +/- 1; P < 0.05) comparable to dynamic yaw (15 cycles/min). Increases in respiratory rate were graded as greater responses occurred during upright (Delta5 +/- 2 breaths/min) and lateral pitch (Delta4 +/- 1) and roll (Delta5 +/- 1) performed at 30 cycles/min. Increases in breathing frequency resulted in increases in minute ventilation during most interventions. Static head-down rotation, which activates otolith organs, did not alter respiratory rate (Delta1 +/- 1 breaths/min). Collectively, these data indicate that semicircular canals, but not otolith organs or neck muscle afferents, mediate increased ventilation in humans and support the concept that vestibular activation alters respiration in humans.

Secondary Channel Bifurcation Geometry: A Multi-dimensional Problem

Science.gov (United States)

Gaeuman, D.; Stewart, R. L.

2017-12-01

The construction of secondary channels (or side channels) is a popular strategy for increasing aquatic habitat complexity in managed rivers. Such channels, however, frequently experience aggradation that prevents surface water from entering the side channels near their bifurcation points during periods of relatively low discharge. This failure to maintain an uninterrupted surface water connection with the main channel can reduce the habitat value of side channels for fish species that prefer lotic conditions. Various factors have been proposed as potential controls on the fate of side channels, including water surface slope differences between the main and secondary channels, the presence of main channel secondary circulation, transverse bed slopes, and bifurcation angle. A quantitative assessment of more than 50 natural and constructed secondary channels in the Trinity River of northern California indicates that bifurcations can assume a variety of configurations that are formed by different processes and whose longevity is governed by different sets of factors. Moreover, factors such as bifurcation angle and water surface slope vary with discharge level and are continuously distributed in space, such that they must be viewed as a multi-dimensional field rather than a single-valued attribute that can be assigned to a particular bifurcation.

New strategies for collision resolution of multi-access channel

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

Multi-access protocol is one of the commonlyapplied access control protocols,in which commonchannels is shared by multi-users(as shown inFig.1).In recent years,this protocol has been suc-cessfully applied to various communication sys-tems[1].Typical examples are satellite communica-tion system,mobile communication system,localarea net work(LAN)and metropolitan area net work(MAN).There are chiefly three kinds of Multi-ac-cess channel models,i.e.fixed allocation model,self-adjusting allocation model and rando...

Plasticity of the human otolith-ocular reflex

Science.gov (United States)

Wall, C. 3rd; Smith, T. R.; Furman, J. M.

1992-01-01

The eye movement response to earth vertical axis rotation in the dark, a semicircular canal stimulus, can be altered by prior exposure to combined visual-vestibular stimuli. Such plasticity of the vestibulo-ocular reflex has not been described for earth horizontal axis rotation, a dynamic otolith stimulus. Twenty normal human subjects underwent one of two types of adaptation paradigms designed either to attenuate or enhance the gain of the semicircular canal-ocular reflex prior to undergoing otolith-ocular reflex testing with horizontal axis rotation. The adaptation paradigm paired a 0.2 Hz sinusoidal rotation about a vertical axis with a 0.2 Hz optokinetic stripe pattern that was deliberately mismatched in peak velocity. Pre- and post-adaptation horizontal axis rotations were at 60 degrees/s in the dark and produced a modulation in the slow component velocity of nystagmus having a frequency of 0.17 Hz due to putative stimulation of the otolith organs. Results showed that the magnitude of this modulation component response was altered in a manner similar to the alteration in semicircular canal-ocular responses. These results suggest that physiologic alteration of the vestibulo-ocular reflex using deliberately mismatched visual and semicircular canal stimuli induces changes in both canal-ocular and otolith-ocular responses. We postulate, therefore, that central nervous system pathways responsible for controlling the gains of canal-ocular and otolith-ocular reflexes are shared.

Multi-server blind quantum computation over collective-noise channels

Science.gov (United States)

Xiao, Min; Liu, Lin; Song, Xiuli

2018-03-01

Blind quantum computation (BQC) enables ordinary clients to securely outsource their computation task to costly quantum servers. Besides two essential properties, namely correctness and blindness, practical BQC protocols also should make clients as classical as possible and tolerate faults from nonideal quantum channel. In this paper, using logical Bell states as quantum resource, we propose multi-server BQC protocols over collective-dephasing noise channel and collective-rotation noise channel, respectively. The proposed protocols permit completely or almost classical client, meet the correctness and blindness requirements of BQC protocol, and are typically practical BQC protocols.

On-line gas mixing and multi-channel distribution system

International Nuclear Information System (INIS)

Kalmani, S.D.; Mondal, N.K.; Satyanarayana, B.; Verma, P.; Joshi, Avinash

2009-01-01

In this presentation, we describe a mass-flow controller based on-line gas mixing unit with the multi-channel distribution system. We highlight different aspects such as requirement, design, calibration, control and operation of this system. This unit has the capability to mix up to four different input gases and distribute over 16 output channels. Output in individual channels is controlled accurately by using capillary-based system. At present, we are using this gas mixing unit for prototype of iron calorimeter (ICAL) detector of India-based Neutrino Observatory (INO).

Emulating Spherical Wave Channel Models in Multi-probe Anechoic Chamber Setups

DEFF Research Database (Denmark)

Fan, Wei; Carreño, Xavier; Nielsen, Jesper Ødum

2015-01-01

to emulate spherical wave channel models in multi-probe anechoic chamber setups. In this paper, a technique based on the field synthesis principle is proposed to approximate spherical waves emitted from arbitrarily located point sources with arbitrary polarizations. Simulation results show that static......Spherical wave channel modeling has attracted huge research attention for massive multiple-input multiple-output (MIMO) and short-distance MIMO systems. Current research work in multi-probe anechoic chamber systems is limited to reproduce radio channels assuming planar wavefronts. There is a need...... spherical waves can be reproduced with a limited number of probes, and the field synthesis accuracy of spherical wave depends on the location of the source point....

A multi-channel AC power supply controller

International Nuclear Information System (INIS)

Su Hong; Li Xiaogang; Ma Xiaoli; Zhou Bo; Yin Weiwei

2003-01-01

A multi-channel ac power supply controller developed recently by authors is introduced briefly in this paper. This controller is a computer controlled multi-electronic-switch device. This controller was developed for the automatic control and monitoring system of a 220 V ac power supply system, it is a key front-end device of the automatic control and monitoring system. There is an electronic switch in each channel, the rated load power is ≤1 kW/each channel. Another function is to sample the 220 V ac output voltage so that computer can monitor the operation state of each electronic switch. Through these switches, the 220 V ac power supply is applied to some device or apparatus that need to be powered by 220 V ac power supply. In the design, a solid-state relay was employed as an electronic switch. This controller can be connected in cascade mode. There are 8 boxes at most can be connected in cascade mode. The length of control word is 8 bit, which contains addressing information and electronic switch state setting information. The sampling output of the controller is multiplexed. It is only one bit that indicates the operating state of an electronic switch. This controller has been used in an automatic control and monitoring system for 220 V ac power supply system

Sistema interconectado de canales de marea del estuario de Bahía Blanca, Argentina: evaluación de la circulación de sedimento como carga de fondo por métodos acústicos An interconnected system of tidal channels in Bahia Blanca estuary, Argentina: an evaluation of bedload sediment transport through acoustic methods

Directory of Open Access Journals (Sweden)

Silvia S Ginsberg

2009-01-01

Full Text Available El estuario de Bahía Blanca, ubicado al sur de la provincia de Buenos Aires (Argentina, constituye una costa baja con extensas llanuras de marea, islas y una compleja red de canales de diferentes magnitudes. Estos últimos integran un sistema de canales interconectados. El objetivo de este trabajo es establecer la circulación sedimentaria como carga de fondo en un sistema de canales interconectados (Cabeza de Buey, El Alambre, La Lista y Principal mediante el análisis de los rasgos morfológicos de fondo, utilizando métodos acústicos (ecosonda y sonar lateral. El canal Cabeza de Buey se comunica con el canal La Lista a través del canal El Alambre. Los dos primeros vierten sus aguas en el canal Principal. El canal Cabeza de Buey posee un lecho plano constituido por material pelítico con arena muy fina. En su tramo más interno se presentan dunas medianas compuestas por arena fina, con un perfil asimétrico según el reflujo. Estas formas, continúan su desarrollo ininterrumpidamente hacia el canal El Alambre, donde se originan dunas grandes (altura 1,5 m formadas por arena muy fina. Sus crestas son sinuosas o barjanoides y poseen su talud hacia la corriente de bajante. En el canal La Lista se determinan dunas asimétricas medianas orientadas según el reflujo y grandes linea-ciones sedimentarias (sand ribbons sobre un fondo consolidado. El sedimento movilizado por la corriente corresponde a la fracción limo-arena fina. La distribución y configuración de las geoformas evidencian que el transporte sedimentario como carga de fondo se concentra principalmente en el canal La Lista. Es así como en el sistema de canales estudiado, sólo un canal de marea regula la dispersión de arena, transportando un importante volumen hacia el canal de navegación.Bahia Blanca estuary located in the south of Buenos Aires province, Argentina, is characterized by a low coastal area with large tidal plains, islands, and a complex network of tidal channels of

A high-throughput, multi-channel photon-counting detector with picosecond timing

Science.gov (United States)

Lapington, J. S.; Fraser, G. W.; Miller, G. M.; Ashton, T. J. R.; Jarron, P.; Despeisse, M.; Powolny, F.; Howorth, J.; Milnes, J.

2009-06-01

High-throughput photon counting with high time resolution is a niche application area where vacuum tubes can still outperform solid-state devices. Applications in the life sciences utilizing time-resolved spectroscopies, particularly in the growing field of proteomics, will benefit greatly from performance enhancements in event timing and detector throughput. The HiContent project is a collaboration between the University of Leicester Space Research Centre, the Microelectronics Group at CERN, Photek Ltd., and end-users at the Gray Cancer Institute and the University of Manchester. The goal is to develop a detector system specifically designed for optical proteomics, capable of high content (multi-parametric) analysis at high throughput. The HiContent detector system is being developed to exploit this niche market. It combines multi-channel, high time resolution photon counting in a single miniaturized detector system with integrated electronics. The combination of enabling technologies; small pore microchannel plate devices with very high time resolution, and high-speed multi-channel ASIC electronics developed for the LHC at CERN, provides the necessary building blocks for a high-throughput detector system with up to 1024 parallel counting channels and 20 ps time resolution. We describe the detector and electronic design, discuss the current status of the HiContent project and present the results from a 64-channel prototype system. In the absence of an operational detector, we present measurements of the electronics performance using a pulse generator to simulate detector events. Event timing results from the NINO high-speed front-end ASIC captured using a fast digital oscilloscope are compared with data taken with the proposed electronic configuration which uses the multi-channel HPTDC timing ASIC.

A high-throughput, multi-channel photon-counting detector with picosecond timing

International Nuclear Information System (INIS)

Lapington, J.S.; Fraser, G.W.; Miller, G.M.; Ashton, T.J.R.; Jarron, P.; Despeisse, M.; Powolny, F.; Howorth, J.; Milnes, J.

2009-01-01

High-throughput photon counting with high time resolution is a niche application area where vacuum tubes can still outperform solid-state devices. Applications in the life sciences utilizing time-resolved spectroscopies, particularly in the growing field of proteomics, will benefit greatly from performance enhancements in event timing and detector throughput. The HiContent project is a collaboration between the University of Leicester Space Research Centre, the Microelectronics Group at CERN, Photek Ltd., and end-users at the Gray Cancer Institute and the University of Manchester. The goal is to develop a detector system specifically designed for optical proteomics, capable of high content (multi-parametric) analysis at high throughput. The HiContent detector system is being developed to exploit this niche market. It combines multi-channel, high time resolution photon counting in a single miniaturized detector system with integrated electronics. The combination of enabling technologies; small pore microchannel plate devices with very high time resolution, and high-speed multi-channel ASIC electronics developed for the LHC at CERN, provides the necessary building blocks for a high-throughput detector system with up to 1024 parallel counting channels and 20 ps time resolution. We describe the detector and electronic design, discuss the current status of the HiContent project and present the results from a 64-channel prototype system. In the absence of an operational detector, we present measurements of the electronics performance using a pulse generator to simulate detector events. Event timing results from the NINO high-speed front-end ASIC captured using a fast digital oscilloscope are compared with data taken with the proposed electronic configuration which uses the multi-channel HPTDC timing ASIC.

Design of alluvial Egyptian irrigation canals using artificial neural networks method

Directory of Open Access Journals (Sweden)

Hassan Ibrahim Mohamed

2013-06-01

Full Text Available In the present study, artificial neural networks method (ANNs is used to estimate the main parameters which used in design of stable alluvial channels. The capability of ANN models to predict the stable alluvial channels dimensions is investigated, where the flow rate and sediment mean grain size were considered as input variables and wetted perimeter, hydraulic radius, and water surface slope were considered as output variables. The used ANN models are based on a back propagation algorithm to train a multi-layer feed-forward network (Levenberg Marquardt algorithm. The proposed models were verified using 311 data sets of field data collected from 61 manmade canals and drains. Several statistical measures and graphical representation are used to check the accuracy of the models in comparison with previous empirical equations. The results of the developed ANN model proved that this technique is reliable in such field compared with previously developed methods.

Digital baseline estimation method for multi-channel pulse height analyzing

International Nuclear Information System (INIS)

Xiao Wuyun; Wei Yixiang; Ai Xianyun

2005-01-01

The basic features of digital baseline estimation for multi-channel pulse height analysis are introduced. The weight-function of minimum-noise baseline filter is deduced with functional variational calculus. The frequency response of this filter is also deduced with Fourier transformation, and the influence of parameters on amplitude frequency response characteristics is discussed. With MATLAB software, the noise voltage signal from the charge sensitive preamplifier is simulated, and the processing effect of minimum-noise digital baseline estimation is verified. According to the results of this research, digital baseline estimation method can estimate baseline optimally, and it is very suitable to be used in digital multi-channel pulse height analysis. (authors)

Magnetic resonance cisternography using the fast spin echo method for the evaluation of vestibular schwannoma

Energy Technology Data Exchange (ETDEWEB)

Nishizawa, Shigeru; Yokoyama, Tetsuo; Uemura, Kenichi [Hamamatsu Univ. School of Medicine, Shizuoka (Japan)

1999-04-01

Neuroimaging of vestibular schwannoma was performed with the fat-suppression spoiled gradient recalled acquisition in the steady state (SPGR) method and magnetic resonance (MR) cisternography, which is a fast spin echo method using a long echo train length, for the preoperative evaluation of the lateral extension of the tumor in the internal auditory canal, and the anatomical identification of the posterior semicircular canal and the nerves in the canal distal to the tumor. The SPGR method overestimated the lateral extension in eight cases, probably because of enhancement of the nerves adjacent to the tumor in the canal. The posterior semicircular canal could not be clearly identified, and the cranial nerves in the canal were shown only as a nerve bundle. In contrast, MR cisternography showed clear images of the lateral extension of the tumor and the facial and cochlear nerves adjacent to the tumor in the internal auditory canal. The anatomical location of the posterior semicircular canal was also clearly shown. These preoperative findings are very useful to plan the extent to which the internal auditory canal can be opened, and for intraoperative identification of the nerves in the canal. MR cisternography is less invasive since no contrast material or radiation is required, as with thin-slice high-resolution computed tomography (CT). MR cisternography should replace high-resolution CT for the preoperative neuroradiological evaluation of vestibular schwannoma. (author)

A Low-cost Multi-channel Analogue Signal Generator

CERN Document Server

Muller, F; Shen, W; Stamen, R

2009-01-01

A scalable multi-channel analogue signal generator is presented. It uses a commercial low-cost graphics card with multiple outputs in a standard PC as signal source. Each color signal serves as independent channel to generate an analogue signal. A custom-built external PCB was developed to adjust the graphics card output voltage levels for a specific task, which needed differential signals. The system furthermore comprises a software package to program the signal shape. The implementation of the signal generator is presented as well as an application where it was successfully utilized.

Effect of flow rate distribution at the inlet on hydrodynamic mixing in narrow rectangular multi-channel

International Nuclear Information System (INIS)

Xu Jianjun; Chen Bingde; Wang Xiaojun

2008-01-01

Flow and heat transfer in the narrow rectangular multi-channel is widely en- countered in the engineering application, hydrodynamic mixing in the narrow rectangular multi-channel is one of the important concerns. With the help of the Computational Fluid Dynamics code CFX, the effect of flow rate distribution of the main channel at the inlet on hydrodynamic mixing in the narrow rectangular multi-channel is numerical simulated. The results show that the flow rate distributions at the inlet have a great effect on hydrodynamics mixing in multi-channel, the flow rate in the main channel doesn't change with increasing the axial mixing section when the average flow rate at the inlet is set. Hydrodynamic mixing will arise in the mixing section when the different ratio of the flow rate distribution at the inlet is set, and hydrodynamic mixing increases with the difference of the flow rate distribution at the inlet increase. The trend of the flow rate distribution of the main channel is consistent during the whole axial mixing section, and hydrodynamic mixing in former 4 mixing section is obvious. (authors)

The Art of Multi-channel Hypermedia Application Development

NARCIS (Netherlands)

Synodinos, Dionysios G.; Avgeriou, Paris

2003-01-01

The plethora of networked devices and platforms that continuously come to light, as well as the emergence of alternative ways to access the internet, have increased the demand for multi-channel access to hypermedia applications. Researchers and practitioners nowadays not only have to deal with the

A Novel Spectrally Efficient Asynchronous Multi-Channel MAC Using a Half-Duplex Transceiver for Wireless Networks

Directory of Open Access Journals (Sweden)

Abdullah Devendiran

2018-01-01

Full Text Available Multi-channel medium access control (MAC protocols maximize network performance by enabling concurrent wireless transmissions over non-interfering channels. Despite physical layer advancements, the underlying IEEE 802.11 MAC standard cannot fully exploit features and support high-performance applications. In this work, we propose the novel spectrally efficient asynchronous multi-channel MAC (SA-MMAC protocol for wireless networks using a single half-duplex transceiver. A full-duplex mode of operation on data channels reduces the signaling overhead and boosts the spectrum efficiency. A revamped contention mechanism of IEEE 802.11 addresses the multi-channel hidden terminal problem, and a jamming signal from the receiver addresses the collisions in control signals. Furthermore, the control channel is used for data transmissions to increase the bandwidth utilization but under a restricted half-duplex mode to avoid causing a bottleneck situation. The simulator is tested for correctness. The results suggest that the protocol can work well on 3, 4, or 12 concurrent channels with high node density, providing about 12.5 times more throughput than IEEE 802.11 and 18% to 95% more throughput than its multi-channel variants under saturated traffic conditions.

Multi-channel electronically scanned cryogenic pressure sensor

Science.gov (United States)

Chapman, John J. (Inventor); Hopson, Purnell, Jr. (Inventor); Kruse, Nancy M. H. (Inventor)

1995-01-01

A miniature, multi-channel, electronically scanned pressure measuring device uses electrostatically bonded silicon dies in a multielement array. These dies are bonded at specific sites on a glass, prepatterned substrate. Thermal data is multiplexed and recorded on each individual pressure measuring diaphragm. The device functions in a cryogenic environment without the need of heaters to keep the sensor at constant temperatures.

A multi-channel coronal spectrophotometer.

Science.gov (United States)

Landman, D. A.; Orrall, F. Q.; Zane, R.

1973-01-01

We describe a new multi-channel coronal spectrophotometer system, presently being installed at Mees Solar Observatory, Mount Haleakala, Maui. The apparatus is designed to record and interpret intensities from many sections of the visible and near-visible spectral regions simultaneously, with relatively high spatial and temporal resolution. The detector, a thermoelectrically cooled silicon vidicon camera tube, has its central target area divided into a rectangular array of about 100,000 pixels and is read out in a slow-scan (about 2 sec/frame) mode. Instrument functioning is entirely under PDP 11/45 computer control, and interfacing is via the CAMAC system.

Development of a method for estimating oesophageal temperature by multi-locational temperature measurement inside the external auditory canal

Science.gov (United States)

Nakada, Hirofumi; Horie, Seichi; Kawanami, Shoko; Inoue, Jinro; Iijima, Yoshinori; Sato, Kiyoharu; Abe, Takeshi

2017-09-01

We aimed to develop a practical method to estimate oesophageal temperature by measuring multi-locational auditory canal temperatures. This method can be applied to prevent heatstroke by simultaneously and continuously monitoring the core temperatures of people working under hot environments. We asked 11 healthy male volunteers to exercise, generating 80 W for 45 min in a climatic chamber set at 24, 32 and 40 °C, at 50% relative humidity. We also exposed the participants to radiation at 32 °C. We continuously measured temperatures at the oesophagus, rectum and three different locations along the external auditory canal. We developed equations for estimating oesophageal temperatures from auditory canal temperatures and compared their fitness and errors. The rectal temperature increased or decreased faster than oesophageal temperature at the start or end of exercise in all conditions. Estimated temperature showed good similarity with oesophageal temperature, and the square of the correlation coefficient of the best fitting model reached 0.904. We observed intermediate values between rectal and oesophageal temperatures during the rest phase. Even under the condition with radiation, estimated oesophageal temperature demonstrated concordant movement with oesophageal temperature at around 0.1 °C overestimation. Our method measured temperatures at three different locations along the external auditory canal. We confirmed that the approach can credibly estimate the oesophageal temperature from 24 to 40 °C for people performing exercise in the same place in a windless environment.

A high-speed interface for multi-channel analyzer

International Nuclear Information System (INIS)

Shen Ji; Zheng Zhong; Qiao Chong; Chen Ziyu; Ye Yunxiu; Ye Zhenyu

2003-01-01

This paper presents a high-speed computer interface for multi-channel analyzer based on DMA technique. Its essential principle and operating procedure are introduced. By the detecting of γ spectrum of 137 Cs with the interface, it's proved that the interface can meet the requirements of high-speed data acquisition

MR score system on spatium perilymphaticum gadolinium opacification and its application for diagnosis of Meniere's disease

International Nuclear Information System (INIS)

Fang Zheming; Liu Ying; Cao Dairong; Chen Xi

2012-01-01

Objective: To propose a MR scoring methods for spatium perilymphaticum gadolinium opacification and explore the value of their diagnosis of Meniere's disease. Methods: Fifty-one asymptomatic and 65 symptomatic patients with Meniere's disease were enrolled in this study. MR imaging of spatium perilymphaticum after intratypanic gadolinium injection were analyzed with following scoring method. (1) Semicircular canal not visualized equal to score 0; some visualized equal score 1; full visualized equal score 2.(2)There were high-signal and low-signal in the vestibule, low-signal areas above the lateral semicircular canal plane equal score 6; low signal areas down to lateral semicircular canal plane equal score 3; no higher signal in the vestibule area equal score 0. (3) Basal turn of cochlea: full visualized equal score 3; part visualized equal score 2; scala vestibule of basal turn smaller than scala tympani equal score 1 regardless of full or visualized in basal turn; no visualized equal score 0. Medial turn of cochlea: full visualized equal score 2; part visualized equal score 1; no visualized equal score 0. Apical turn of cochlea: visualized equal score 1; no visualized equal score 0. One radiologist scored all cases with double blind. SPSS 17.0 software was used to conduct multiple independent-samples nonparametric tests, multivariate Logistic regression, and ROC curve analysis. Evaluate the sensitivity and specificity for diagnosis of Meniere's disease with the scoring system. Results: (1) Meniere's disease summation score 0 to 12, median 9 (quarter spacing 4.5); no symptoms group summation score 15 to 18,median 17 (quarter spacing 3), two group differences has statistics significance (Wilcoxon rank and inspection U=-9.118, P=0.00). (2) Based on summation score for the diagnosis of Meniere's disease, tangent point was 14.5, Youden index 0.969, specificity 100.0%, sensitivity 96.9%.(3) Let cochlear, vestibular, semicircular canal scoring

A Low-cost Multi-channel Analogue Signal Generator

CERN Document Server

Müller, F; The ATLAS collaboration; Shen, W; Stamen, R

2009-01-01

A scalable multi-channel analogue signal generator is presented. It uses a commercial low-cost graphics card with multiple outputs in a standard PC as signal source. Each color signal serves as independent channel to generate an analogue signal. A custom-built external PCB was developed to adjust the graphics card output voltage levels for a specific task, which needed differential signals. The system furthermore comprises a software package to program the signal shape. The signal generator was successfully used as independent test bed for the ATLAS Level-1 Trigger Pre-Processor, providing up to 16 analogue signals.

Emitter signal separation method based on multi-level digital channelization

Science.gov (United States)

Han, Xun; Ping, Yifan; Wang, Sujun; Feng, Ying; Kuang, Yin; Yang, Xinquan

2018-02-01

To solve the problem of emitter separation under complex electromagnetic environment, a signal separation method based on multi-level digital channelization is proposed in this paper. A two-level structure which can divide signal into different channel is designed first, after that, the peaks of different channels are tracked using the track filter and the coincident signals in time domain are separated in time-frequency domain. Finally, the time domain waveforms of different signals are acquired by reverse transformation. The validness of the proposed method is proved by experiment.

Channel Power in Multi-Channel Environments

NARCIS (Netherlands)

M.G. Dekimpe (Marnik); B. Skiera (Bernd)

2004-01-01

textabstractIn the literature, little attention has been paid to instances where companies add an Internet channel to their direct channel portfolio. However, actively managing multiple sales channels requires knowing the customers’ channel preferences and the resulting channel power. Two key

16-channel analyser with high time-resolution for multiple coincidence experiments; Selecteur a 16 canaux a temps de resolution eleve pour experiences de coincidences multiples; Ispol'zovanie shestiadtsatikanal'nogo analizatora s bol'shoj razreshayushchej sposobnost'yu po vremeni dlya opytov s mnogokratnymi sovpadeniyami; Analizador de 16 canales de elevado poder temporal de resolucion para experimentos de coincidencias multiples

Energy Technology Data Exchange (ETDEWEB)

Brandt, B; Cappeller, U [University of Marburg, Marburg, Federal Republic of Germany (Germany)

1962-04-15

In usual slow-fast-coincidence experiments such events are counted which are selected in pulse-height by means of single-channel analysers. It is desirable to extend these techniques to a simultaneous energy-analysis of the pulses, selecting pulse-heights by means of multi-channel analysers. Multi-channel analysers used to perform such multiple coincidence experiments should give information about the amplitudes of arriving pulses at a well defined time-interval after the rising of the analysed pulse. A 16-channel pulse-height analyser is described which permits the generation of a pulse-height signal 2.5 x 10{sup -6} s after pulse-rising with an uncertainty of less than {+-} 2 x 10{sup -8} s. The resolving-time is less than 5 x 10{sup -6} s, controlled by an inspector-circuit to avoid distortions arising from the pile-up of pulses. The channel width is controlled by a window-amplifier, adjustable from 1 V to 7 V. The channel-height may be selected from 7 V to 103 V in steps of 0.5 V. (author) [French] En general, dans les experiences de coincidences lentes-rapides, on compte des evenements traduits sous forme d'impulsions dont l'amplitude est selectionnee a l'aide de selecteurs a un seul canal. Il est souhaitable d'etendre cette technique a l'analyse simultanee de l'energie des impulsions, en selectionnant les amplitudes au moyen de selecteurs a canaux multiples. Les selecteurs multi-canaux utilises pour ces experiences de coincidences multiples devraient fournir une indication sur les amplitudes des impulsions d'entree a un intervalle de temps bien defini, apres la montee de l'impulsion analysee. Les auteurs decrivent un selecteur d'amplitude a 16 canaux, qui delivre un signal 2,5 {center_dot} 10{sup -6} s apres l'etablissement de l'impulsion avec une erreur inferieure a {+-} 2 {center_dot} 10{sup -8} s. Le temps de resolution, inferieur a 5 {center_dot} 10{sup -6} s, est commande par un circuit special pour eviter les derangements qui resulteraient de l

The design and implementation of a PC based multi-channel scaler system

International Nuclear Information System (INIS)

Wang Qiang; Chinese Academy of Sciences, Beijing; Jin Dapeng; Liu Zhen'an; Zhao Dixin

2007-01-01

A multi-channel scaler system is designed for the system check and status monitoring of the BESIII trigger system. It is composed of a PC, two PCI interface multi-channel scaler cards, the corresponding drivers and user programs. Total 64 signals can be scaled and monitored in real time. The scaled data are recorded locally and some of them are distributed to the online system. In this paper, the hardware structure, software development and long time running stability of the system are introduced. (authors)

An interactive visualization tool for multi-channel confocal microscopy data in neurobiology research

KAUST Repository

Yong Wan,

2009-11-01

Confocal microscopy is widely used in neurobiology for studying the three-dimensional structure of the nervous system. Confocal image data are often multi-channel, with each channel resulting from a different fluorescent dye or fluorescent protein; one channel may have dense data, while another has sparse; and there are often structures at several spatial scales: subneuronal domains, neurons, and large groups of neurons (brain regions). Even qualitative analysis can therefore require visualization using techniques and parameters fine-tuned to a particular dataset. Despite the plethora of volume rendering techniques that have been available for many years, the techniques standardly used in neurobiological research are somewhat rudimentary, such as looking at image slices or maximal intensity projections. Thus there is a real demand from neurobiologists, and biologists in general, for a flexible visualization tool that allows interactive visualization of multi-channel confocal data, with rapid fine-tuning of parameters to reveal the three-dimensional relationships of structures of interest. Together with neurobiologists, we have designed such a tool, choosing visualization methods to suit the characteristics of confocal data and a typical biologist\\'s workflow. We use interactive volume rendering with intuitive settings for multidimensional transfer functions, multiple render modes and multi-views for multi-channel volume data, and embedding of polygon data into volume data for rendering and editing. As an example, we apply this tool to visualize confocal microscopy datasets of the developing zebrafish visual system.

Cyclic Communication and the Inseparability of MIMO Multi-way Relay Channels

KAUST Repository

Chaaban, Anas; Sezgin, Aydin

2015-01-01

The K-user MIMO multi-way relay channel (Ychannel) consisting of K users with M antennas each and a common relay node with N antennas is studied in this paper. Each user wants to exchange messages with all the other users via the relay. A transmission strategy is proposed for this channel. The proposed strategy is based on two steps: channel diagonalization and cyclic communication. The channel diagonalization is applied by using zero-forcing beam-forming. After channel diagonalization, the channel is decomposed into parallel sub-channels. Cyclic communication is then applied, where signal-space alignment for network-coding is used over each sub-channel. The proposed strategy achieves the optimal DoF region of the channel if N M. To prove this, a new degrees-of-freedom outer bound is derived. As a by-product, we conclude that the MIMO Y-channel is not separable, i.e., independent coding on separate sub-channels is not enough, and one has to code jointly over several sub-channels.

Cyclic Communication and the Inseparability of MIMO Multi-way Relay Channels

KAUST Repository

Chaaban, Anas

2015-10-27

The K-user MIMO multi-way relay channel (Ychannel) consisting of K users with M antennas each and a common relay node with N antennas is studied in this paper. Each user wants to exchange messages with all the other users via the relay. A transmission strategy is proposed for this channel. The proposed strategy is based on two steps: channel diagonalization and cyclic communication. The channel diagonalization is applied by using zero-forcing beam-forming. After channel diagonalization, the channel is decomposed into parallel sub-channels. Cyclic communication is then applied, where signal-space alignment for network-coding is used over each sub-channel. The proposed strategy achieves the optimal DoF region of the channel if N M. To prove this, a new degrees-of-freedom outer bound is derived. As a by-product, we conclude that the MIMO Y-channel is not separable, i.e., independent coding on separate sub-channels is not enough, and one has to code jointly over several sub-channels.

E-Fulfillment and Multi-Channel Distribution – A Review

NARCIS (Netherlands)

N.A.H. Agatz (Niels); M. Fleischmann (Moritz); J.A.E.E. van Nunen (Jo)

2006-01-01

textabstractThis review addresses the specific supply chain management issues of Internet fulfillment in a multi-channel environment. It provides a systematic overview of managerial planning tasks and reviews corresponding quantitative models. In this way, we aim to enhance the understanding of

Pathologic Changes of the Peripheral Vestibular System Secondary to Chronic Otitis Media.

Science.gov (United States)

da Costa Monsanto, Rafael; Erdil, Mehmet; Pauna, Henrique F; Kwon, Geeyoun; Schachern, Patricia A; Tsuprun, Vladimir; Paparella, Michael M; Cureoglu, Sebahattin

2016-09-01

To evaluate the histopathologic changes of dark, transitional, and hair cells of the vestibular system in human temporal bones from patients with chronic otitis media. Comparative human temporal bone study. Otopathology laboratory. To compare the density of vestibular dark, transitional, and hair cells in temporal bones with and without chronic otitis media, we used differential interference contrast microscopy. In the chronic otitis media group (as compared with the age-matched control group), the density of type I and type II hair cells was significantly decreased in the lateral semicircular canal, saccule, and utricle (P otitis media group in the posterior semicircular canal (P = .005), but that of type II cells was not (P = .168). The mean number of dark cells was significantly decreased in the chronic otitis media group in the lateral semicircular canal (P = .014) and in the posterior semicircular canal (P = .002). We observed no statistically significant difference in the density of transitional cells between the 2 groups (P > .1). The findings of our study suggest that the decrease in the number of vestibular sensory cells and dark cells could be the cause of the clinical symptoms of imbalance of some patients with chronic otitis media. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2016.

Superior Canal Dehiscence Syndrome Affecting 3 Families.

Science.gov (United States)

Heidenreich, Katherine D; Kileny, Paul R; Ahmed, Sameer; El-Kashlan, Hussam K; Melendez, Tori L; Basura, Gregory J; Lesperance, Marci M

2017-07-01

Superior canal dehiscence syndrome (SCDS) is an increasingly recognized cause of hearing loss and vestibular symptoms, but the etiology of this condition remains unknown. To describe 7 cases of SCDS across 3 families. This retrospective case series included 7 patients from 3 different families treated at a neurotology clinic at a tertiary academic medical center from 2010 to 2014. Patients were referred by other otolaryngologists or were self-referred. Each patient demonstrated unilateral or bilateral SCDS or near dehiscence. Clinical evaluation involved body mass index calculation, audiometry, cervical vestibular evoked myogenic potential testing, electrocochleography, and multiplanar computed tomographic (CT) scan of the temporal bones. Zygosity testing was performed on twin siblings. The diagnosis of SCDS was made if bone was absent over the superior semicircular canal on 2 consecutive CT images, in addition to 1 physiologic sign consistent with labyrinthine dehiscence. Near dehiscence was defined as absent bone on only 1 CT image but with symptoms and at least 1 physiologic sign of labyrinthine dehiscence. A total of 7 patients (5 female and 2 male; age range, 8-49 years) from 3 families underwent evaluation. Family A consisted of 3 adult first-degree relatives, of whom 2 were diagnosed with SCDS and 1 with near dehiscence. Family B included a mother and her child, both of whom were diagnosed with unilateral SCDS. Family C consisted of adult monozygotic twins, each of whom was diagnosed with unilateral SCDS. For all cases, dehiscence was located at the arcuate eminence. Obesity alone did not explain the occurrence of SCDS because 5 of the 7 cases had a body mass index (calculated as weight in kilograms divided by height in meters squared) less than 30.0. Superior canal dehiscence syndrome is a rare, often unrecognized condition. This report of 3 multiplex families with SCDS provides evidence in support of a potential genetic contribution to the etiology

Harnessing mode-selective nonlinear optics for on-chip multi-channel all-optical signal processing

Directory of Open Access Journals (Sweden)

Ming Ma

2016-11-01

Full Text Available All-optical signal processing based on nonlinear optical effects allows for the realization of important functions in telecommunications including wavelength conversion, optical multiplexing/demultiplexing, Fourier transformation, and regeneration, amongst others, on ultrafast time scales to support high data rate transmission. In integrated photonic subsystems, the majority of all-optical signal processing systems demonstrated to date typically process only a single channel at a time or perform a single processing function, which imposes a serious limitation on the functionality of integrated solutions. Here, we demonstrate how nonlinear optical effects can be harnessed in a mode-selective manner to perform simultaneous multi-channel (two and multi-functional optical signal processing (i.e., regenerative wavelength conversion in an integrated silicon photonic device. This approach, which can be scaled to a higher number of channels, opens up a new degree of freedom for performing a broad range of multi-channel nonlinear optical signal processing functions using a single integrated photonic device.

A multi-channel high-resolution time recorder system

International Nuclear Information System (INIS)

Zhang Lingyun; Yang Xiaojun; Song Kezhu; Wang Yanfang

2004-01-01

This paper introduces a multi-channel and high-speed time recorder system, which was originally designed to work in the experiments of quantum cryptography research. The novelty of the system is that all the hardware logic is performed by only one FPGA. The system can achieve several desirable features, such as simplicity, high resolution and high processing speed. (authors)

A multi-channel photometric detector for multi-component analysis in flow injection analysis.

Science.gov (United States)

Tan, A; Huang, J; Geng, L; Xu, J; Zhao, X

1994-01-01

The detector, a multi-channel photometric detector, described in this paper was developed using multi-wavelength LEDs (light emitting diode) and phototransistors for absorbance measurement controlled by an Intel 8031 8-bit single chip microcomputer. Up to four flow cells can be attached to the detector. The LEDs and phototransistors are both inexpensive, and reliable. The results given by the detector for simultaneous determination of trace amounts of cobalt and cadmium in zinc sulphate electrolyte are reported. Because of the newly developed detector, this approach employs much less hardware apparatus than by employing conventional photometric detectors.

User manual for semi-circular compact range reflector code: Version 2

Science.gov (United States)

Gupta, Inder J.; Burnside, Walter D.

1987-01-01

A computer code has been developed at the Ohio State University ElectroScience Laboratory to analyze a semi-circular paraboloidal reflector with or without a rolled edge at the top and a skirt at the bottom. The code can be used to compute the total near field of the reflector or its individual components at a given distance from the center of the paraboloid. The code computes the fields along a radial, horizontal, vertical or axial cut at that distance. Thus, it is very effective in computing the size of the sweet spot for a semi-circular compact range reflector. This report describes the operation of the code. Various input and output statements are explained. Some results obtained using the computer code are presented to illustrate the code's capability as well as being samples of input/output sets.

Analysis and compensation of synchronous measurement error for multi-channel laser interferometer

International Nuclear Information System (INIS)

Du, Shengwu; Hu, Jinchun; Zhu, Yu; Hu, Chuxiong

2017-01-01

Dual-frequency laser interferometer has been widely used in precision motion system as a displacement sensor, to achieve nanoscale positioning or synchronization accuracy. In a multi-channel laser interferometer synchronous measurement system, signal delays are different in the different channels, which will cause asynchronous measurement, and then lead to measurement error, synchronous measurement error (SME). Based on signal delay analysis of the measurement system, this paper presents a multi-channel SME framework for synchronous measurement, and establishes the model between SME and motion velocity. Further, a real-time compensation method for SME is proposed. This method has been verified in a self-developed laser interferometer signal processing board (SPB). The experiment result showed that, using this compensation method, at a motion velocity 0.89 m s −1 , the max SME between two measuring channels in the SPB is 1.1 nm. This method is more easily implemented and applied to engineering than the method of directly testing smaller signal delay. (paper)

Analysis and compensation of synchronous measurement error for multi-channel laser interferometer

Science.gov (United States)

Du, Shengwu; Hu, Jinchun; Zhu, Yu; Hu, Chuxiong

2017-05-01

Dual-frequency laser interferometer has been widely used in precision motion system as a displacement sensor, to achieve nanoscale positioning or synchronization accuracy. In a multi-channel laser interferometer synchronous measurement system, signal delays are different in the different channels, which will cause asynchronous measurement, and then lead to measurement error, synchronous measurement error (SME). Based on signal delay analysis of the measurement system, this paper presents a multi-channel SME framework for synchronous measurement, and establishes the model between SME and motion velocity. Further, a real-time compensation method for SME is proposed. This method has been verified in a self-developed laser interferometer signal processing board (SPB). The experiment result showed that, using this compensation method, at a motion velocity 0.89 m s-1, the max SME between two measuring channels in the SPB is 1.1 nm. This method is more easily implemented and applied to engineering than the method of directly testing smaller signal delay.

Adaptive multi-channel downlink assignment for overloaded spectrum-shared multi-antenna overlaid cellular networks

KAUST Repository

Radaydeh, Redha Mahmoud

2012-10-19

Overlaid cellular technology has been considered as a promising candidate to enhance the capacity and extend the coverage of cellular networks, particularly indoors. The deployment of small cells (e.g. femtocells and/or picocells) in an overlaid setup is expected to reduce the operational power and to function satisfactorily with the existing cellular architecture. Among the possible deployments of small-cell access points is to manage many of them to serve specific spatial locations, while reusing the available spectrum universally. This contribution considers the aforementioned scenario with the objective to serve as many active users as possible when the available downlink spectrum is overloaded. The case study is motivated by the importance of realizing universal resource sharing in overlaid networks, while reducing the load of distributing available resources, satisfying downlink multi-channel assignment, controlling the aggregate level of interference, and maintaining desired design/operation requirements. These objectives need to be achieved in distributed manner in each spatial space with as low processing load as possible when the feedback links are capacity-limited, multiple small-cell access points can be shared, and data exchange between access points can not be coordinated. This contribution is summarized as follows. An adaptive downlink multi-channel assignment scheme when multiple co-channel and shared small-cell access points are allocated to serve active users is proposed. It is assumed that the deployed access points employ isotropic antenna arrays of arbitrary sizes, operate using the open-access strategy, and transmit on shared physical channels simultaneously. Moreover, each active user can be served by a single transmit channel per each access point at a time, and can sense the concurrent interference level associated with each transmit antenna channel non-coherently. The proposed scheme aims to identify a suitable subset of transmit channels

Instrument separation analysis of multi-used ProTaper Universal rotary system during root canal therapy.

Science.gov (United States)

Wu, Jintao; Lei, Gang; Yan, Ming; Yu, Yan; Yu, Jinhua; Zhang, Guangdong

2011-06-01

The purpose of this study was to identify the influential factors responsible for clinical instrument separation of reused ProTaper Universal rotary instruments (Dentsply Maillefer, Ballaigues, Switzerland). Six thousand one hundred fifty-four root canals in 2,654 teeth were prepared using ProTaper Universal files in endodontic clinics. Separation incidence was determined based on the number of treated teeth or canals. Data were collected including the size of fractured instrument, the length and location of a broken segment within the root canal, and the curvature of canal. The chi-square test and independent samples t test were used to determine the statistical significance. The overall instrument separation incidences were 2.6% according to the number of teeth and 1.1% according to the canal number, respectively. Separation incidences according to the number of teeth or canals were significantly higher (P molars than those in premolars or anterior teeth. Because of its largest diameter, F3 file presented the highest separation incidence according to the number of teeth (1.0%) or canals (0.4%); 47.5% instrument separation of mandibular molars and 61.5% instrument separation of maxillary molars happened in the mesiobuccal canals. Moreover, 91.4% fragments were located in the apical third of root canals, and 54.2% instrument separation occurred in severely curved canals. There was a significant difference (P < .05) in the mean fracture length between shaping (2.42 ± 0.73 mm) and finishing files (3.32 ± 0.73 mm). Separation incidence according to the canal number is more reliable than that according to the number of teeth because of the variable canal number in different teeth. The tooth type, rotary file size, canal location, and anatomy were correlated with the instrument separation of reused ProTaper Universal files. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Mitigation Technique for Receiver Performance Variation of Multi-Color Channels in Visible Light Communication

Directory of Open Access Journals (Sweden)

Yeong Min Jang

2011-06-01

Full Text Available “Green” and energy-efficient wireless communication schemes have recently experienced rapid development and garnered much interest. One such scheme is visible light communication (VLC which is being touted as one of the next generation wireless communication systems. VLC allows communication using multi-color channels that provide high data rates and illumination simultaneously. Even though VLC has many advantageous features compared with RF technologies, including visibility, ubiquitousness, high speed, high security, harmlessness for the human body and freedom of RF interference, it suffers from some problems on the receiver side, one of them being photo sensitivity dissimilarity of the receiver. The photo sensitivity characteristics of a VLC receiver such as Si photo-detector depend on the wavelength variation. The performance of the VLC receiver is not uniform towards all channel colors, but it is desirable for receivers to have the same performance on each color channel. In this paper, we propose a mitigation technique for reducing the performance variation of the receiver on multi-color channels. We show received power, SNR, BER, output current, and outage probability in our simulation for different color channels. Simulation results show that, the proposed scheme can reduce the performance variation of the VLC receiver on multi-color channels.

Multi-channel time-division integrator in HL-2A

International Nuclear Information System (INIS)

Yan Ji

2008-01-01

HL-2A is China's first Tokamak device with divertor configuration (magnetic confinement controlled nuclear fusion device). To find out the details of on-going fusion reaction at different times is of important significance in achieving controlled nuclear fusion. We developed a new type multi-channel time-division integrator for HL-2A. It has functions of automatic cutting off negative pulse of the input signals, optional integrating time division spacing 0.2-1 ms, TTL starting trigger signal, automatic regularly work 20 s, and integrating 10 channel at the same time. (authors)

The crazy project – Canal Istanbul

Directory of Open Access Journals (Sweden)

Seda Kundak

2011-10-01

Full Text Available It was late April 2011 when “the Crazy Project - Canal Istanbul” was proposed by the Prime Minister of Turkey, during his election campaign.  Although the idea of an artificial canal is not new, since it is initiated without any consensus between the people and institutions in Istanbul, the project immediately set a large number of debates. These vary from the legitimacy of decentralization of governance, to potential impacts of the canal on international politics, economy, environment and urban life.  Regarding past infrastructure projects in Istanbul, such large scale investments have caused extensive acceleration in construction sector in one hand and social and economic shifts on the other.  In this paper, the Canal Istanbul Project is evaluated according to basic motivations and claims of the PM, multi-perspective view through challenges and limitation that the project is likely to face with and speculations on implementation approach. The final discussion on the project is based on benefits/losses of Istanbul once the project will be implemented.

Multi-channel temperature measurement system for automotive battery stack

Science.gov (United States)

Lewczuk, Radoslaw; Wojtkowski, Wojciech

2017-08-01

A multi-channel temperature measurement system for monitoring of automotive battery stack is presented in the paper. The presented system is a complete battery temperature measuring system for hybrid / electric vehicles that incorporates multi-channel temperature measurements with digital temperature sensors communicating through 1-Wire buses, individual 1-Wire bus for each sensor for parallel computing (parallel measurements instead of sequential), FPGA device which collects data from sensors and translates it for CAN bus frames. CAN bus is incorporated for communication with car Battery Management System and uses additional CAN bus controller which communicates with FPGA device through SPI bus. The described system can parallel measure up to 12 temperatures but can be easily extended in the future in case of additional needs. The structure of the system as well as particular devices are described in the paper. Selected results of experimental investigations which show proper operation of the system are presented as well.

Ant Colony Optimization Algorithm for Centralized Dynamic Channel Allocation in Multi-Cell OFDMA Systems

Science.gov (United States)

Kim, Hyo-Su; Kim, Dong-Hoi

The dynamic channel allocation (DCA) scheme in multi-cell systems causes serious inter-cell interference (ICI) problem to some existing calls when channels for new calls are allocated. Such a problem can be addressed by advanced centralized DCA design that is able to minimize ICI. Thus, in this paper, a centralized DCA is developed for the downlink of multi-cell orthogonal frequency division multiple access (OFDMA) systems with full spectral reuse. However, in practice, as the search space of channel assignment for centralized DCA scheme in multi-cell systems grows exponentially with the increase of the number of required calls, channels, and cells, it becomes an NP-hard problem and is currently too complicated to find an optimum channel allocation. In this paper, we propose an ant colony optimization (ACO) based DCA scheme using a low-complexity ACO algorithm which is a kind of heuristic algorithm in order to solve the aforementioned problem. Simulation results demonstrate significant performance improvements compared to the existing schemes in terms of the grade of service (GoS) performance and the forced termination probability of existing calls without degrading the system performance of the average throughput.

Multi-channel grouping techniques for conducting reactor safety studies

International Nuclear Information System (INIS)

Waltar, A.E.; Wilburn, N.P.

1975-01-01

In conducting safety studies for postulated unprotected accidents in an LMFBR system, it is common practice to employ multi-channel coupled neutronics, thermal hydraulics computer programs such as SAS3A or MELT-III. The multichannel feature of such code systems is important if the natural fuel failure incoherencies and the resulting sodium void/fuel motion reactivity feedbacks--which have strong spatial variations--are to be properly modeled. Because of the large amounts of computer time associated with many channel runs, however, there is a strong incentive to conduct parametric studies with as few channels as possible. The paper presented is focused on methods successfully employed to accomplish this end for a study of the hypothetical unprotected transient overpower accident conducted for the FFTF

Content-Based Multi-Channel Network Coding Algorithm in the Millimeter-Wave Sensor Network

Directory of Open Access Journals (Sweden)

Kai Lin

2016-07-01

Full Text Available With the development of wireless technology, the widespread use of 5G is already an irreversible trend, and millimeter-wave sensor networks are becoming more and more common. However, due to the high degree of complexity and bandwidth bottlenecks, the millimeter-wave sensor network still faces numerous problems. In this paper, we propose a novel content-based multi-channel network coding algorithm, which uses the functions of data fusion, multi-channel and network coding to improve the data transmission; the algorithm is referred to as content-based multi-channel network coding (CMNC. The CMNC algorithm provides a fusion-driven model based on the Dempster-Shafer (D-S evidence theory to classify the sensor nodes into different classes according to the data content. By using the result of the classification, the CMNC algorithm also provides the channel assignment strategy and uses network coding to further improve the quality of data transmission in the millimeter-wave sensor network. Extensive simulations are carried out and compared to other methods. Our simulation results show that the proposed CMNC algorithm can effectively improve the quality of data transmission and has better performance than the compared methods.

Unilateral posterior canal-plugging surgery for intractable bilateral posterior canal-type benign paroxysmal positional vertigo.

Science.gov (United States)

Hotta, Sayaka; Imai, Takao; Higashi-Shingai, Kayoko; Okazaki, Suzuyo; Okumura, Tomoko; Uno, Atsuhiko; Ohta, Yumi; Morihana, Tetsuo; Sato, Takashi; Inohara, Hidenori

2017-10-01

To investigate the effectiveness of unilateral posterior semicircular canal (PSCC)-plugging surgery for patients with intractable bilateral PSCC-type benign paroxysmal positional vertigo (P-BPPV). From July 2011 to December 2015, we diagnosed 136 patients with P-BPPV. Of these, 3 patients had bilateral P-BPPV, and in 2 of the 3, the condition had been refractory to conservative treatment for more than 1 year. We planned a staged PSCC-plugging surgery for these 2 patients; initially one side was treated, and the contralateral side was treated 6 months later. After the first surgery, both patients experienced improvement in symptoms of vertigo and nystagmus on the operated side and no change on the non-operated side. Patients underwent the Epley maneuver for the non-operated side. In one case, the non-operated side was cured. In the other case, although the P-BPPV was not completely resolved, the patient was satisfied with the result of unilateral surgery because he was now able to turn in bed to the operated side without vertigo. Before surgery, he had experienced vertigo when turning even slightly in bed. We propose that even unilateral PSCC-plugging surgery is effective for some patients with intractable bilateral P-BPPV. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Dynamic channel assignment scheme for multi-radio wireless mesh networks

CSIR Research Space (South Africa)

Kareem, TR

2008-09-01

Full Text Available This paper investigates the challenges involve in designing a dynamic channel assignment (DCA) scheme for wireless mesh networks, particularly for multi-radio systems. It motivates the need for fast switching and process coordination modules...

An Efficient VLSI Architecture for Multi-Channel Spike Sorting Using a Generalized Hebbian Algorithm

Directory of Open Access Journals (Sweden)

Ying-Lun Chen

2015-08-01

Full Text Available A novel VLSI architecture for multi-channel online spike sorting is presented in this paper. In the architecture, the spike detection is based on nonlinear energy operator (NEO, and the feature extraction is carried out by the generalized Hebbian algorithm (GHA. To lower the power consumption and area costs of the circuits, all of the channels share the same core for spike detection and feature extraction operations. Each channel has dedicated buffers for storing the detected spikes and the principal components of that channel. The proposed circuit also contains a clock gating system supplying the clock to only the buffers of channels currently using the computation core to further reduce the power consumption. The architecture has been implemented by an application-specific integrated circuit (ASIC with 90-nm technology. Comparisons to the existing works show that the proposed architecture has lower power consumption and hardware area costs for real-time multi-channel spike detection and feature extraction.

An Efficient VLSI Architecture for Multi-Channel Spike Sorting Using a Generalized Hebbian Algorithm.

Science.gov (United States)

Chen, Ying-Lun; Hwang, Wen-Jyi; Ke, Chi-En

2015-08-13

A novel VLSI architecture for multi-channel online spike sorting is presented in this paper. In the architecture, the spike detection is based on nonlinear energy operator (NEO), and the feature extraction is carried out by the generalized Hebbian algorithm (GHA). To lower the power consumption and area costs of the circuits, all of the channels share the same core for spike detection and feature extraction operations. Each channel has dedicated buffers for storing the detected spikes and the principal components of that channel. The proposed circuit also contains a clock gating system supplying the clock to only the buffers of channels currently using the computation core to further reduce the power consumption. The architecture has been implemented by an application-specific integrated circuit (ASIC) with 90-nm technology. Comparisons to the existing works show that the proposed architecture has lower power consumption and hardware area costs for real-time multi-channel spike detection and feature extraction.

An Efficient VLSI Architecture for Multi-Channel Spike Sorting Using a Generalized Hebbian Algorithm

Science.gov (United States)

Chen, Ying-Lun; Hwang, Wen-Jyi; Ke, Chi-En

2015-01-01

A novel VLSI architecture for multi-channel online spike sorting is presented in this paper. In the architecture, the spike detection is based on nonlinear energy operator (NEO), and the feature extraction is carried out by the generalized Hebbian algorithm (GHA). To lower the power consumption and area costs of the circuits, all of the channels share the same core for spike detection and feature extraction operations. Each channel has dedicated buffers for storing the detected spikes and the principal components of that channel. The proposed circuit also contains a clock gating system supplying the clock to only the buffers of channels currently using the computation core to further reduce the power consumption. The architecture has been implemented by an application-specific integrated circuit (ASIC) with 90-nm technology. Comparisons to the existing works show that the proposed architecture has lower power consumption and hardware area costs for real-time multi-channel spike detection and feature extraction. PMID:26287193

Preeclampsia, migración celular y canales iónicos Preeclampsia, cellular migration and ion channels

Directory of Open Access Journals (Sweden)

Silvana M. del Mónaco

2008-10-01

Full Text Available En la placenta humana, el sinciciotrofoblasto es la barrera que regula el transporte de nutrientes, solutos y agua entre la sangre materna y fetal. Dentro de este movimiento transepitelial se encuentra el del Na+, su contribución a la presión osmótica es fundamental en la regulación del volumen de líquido extracelular. El canal epitelial de sodio sensible al amiloride (ENaC media el transporte de Na+ desde el lumen hacia el interior celular en numerosos epitelios absortivos. Está regulado por la aldosterona, vasopresina, catecolaminas, estrógenos y progesterona. Es bloqueado por el amiloride y sus análogos. Para su activación, diversas proteasas lo escinden en la membrana plasmática y esto a su vez es regulado por la aldosterona. El ENaC está expresado también en la placenta humana y aunque su función no es conocida, podría participar en la homeostasis de agua y electrolitos. El ENaC también es influenciado por el estado de las proteínas del citoesqueleto y los cambios en el volumen celular alteran a su vez a éste. De esta manera existe una relación entre el ENaC y el citoesqueleto. Además, las corrientes de Na+ por el ENaC y otros canales de sodio participan en la migración celular en células normales y cancerosas. Aquí presentamos evidencias que avalan la hipótesis que el ENaC es necesario para la migración celular en células BeWo, derivadas del trofoblasto humano, que sintetizan hormonas y expresan el ENaC. Las células BeWO han sido utilizadas como modelo experimental para estudiar el transporte en células de placenta.The syncytiotrophoblast acts in human placenta as a transporting barrier regulating the transference of nutrients, solutes and water between maternal and fetal blood. This transepithelial transport involves movement of Na+ and its contribution to the osmotic pressure is an important determinant of the extracellular fluid volume. ENaC is a channel that mediates entry of Na+ from the luminal fluid into

Estimation of friction loss under forced flow pulsations in a channel with discrete roughness elements

Science.gov (United States)

Davletshin, I. A.; Dushina, O. A.; Mikheev, N. I.; Kolchin, S. A.

2017-11-01

The pulsating flow in a circular channel with semicircular annular ribs as discrete roughness elements has been studied experimentally. Air flow under atmospheric conditions at the channel inlet has been considered. Steady and pulsating air flow has been studied under different frequencies and amplitudes of forced pulsations generated by periodic blockage of the channel cross section by a rotating flap. Flow resistance in pulsating regimes has been estimated from the average static pressure drop. The resistance values attained twice the steady flow ones.

Labyrinthine dehiscence in a child

International Nuclear Information System (INIS)

Paladin, Angelisa M.; Phillips, Grace S.; Raske, Molly E.; Sie, Kathleen C.Y.

2008-01-01

A 4-year-old boy presented with moderate to profound mixed hearing loss in the right ear and moderate to severe mixed hearing loss in the left ear, prompting a temporal bone CT scan. Images revealed partial dehiscence of the right posterior semicircular canal. Semicircular canal dehiscence and its associated clinical syndrome have been described in adults. We present this case as a unique finding in a child and discuss the possible clinical and research implications. (orig.)

Online purchase intentions: A multi-channel store image perspective

NARCIS (Netherlands)

Verhagen, T.; van Dolen, W.

2009-01-01

The advantages of the bricks-and-clicks retail format in the battle for the online customer has been widely discussed but empirical research on it has been limited. We applied a multi-channel store image perspective to assess its influence on online purchase intentions. Drawing on a sample of 630

Salt Intrusion, Tides and Mixing in Multi-channel Estuaries

NARCIS (Netherlands)

Nguyen, A.D.

2008-01-01

Multi-channel estuaries, such as the Mekong Delta in Vietnam and the Scheldt in the Netherlands, have characteristics of both the river and the sea, forming a unique environment influenced by tidal movements of the sea and freshwater flow of the river. This study addresses a number of knowledge gaps

Condutas pós-manobra de Epley em idosos com VPPB de canal posterior Conduct after Epley's maneuver in elderly with posterior canal BPPV in the posterior canal

Directory of Open Access Journals (Sweden)

Ana Paula do Rego André

2010-06-01

Full Text Available A Vertigem Postural Paroxística Benigna é a mais comum das vestibulopatias periféricas, principalmente em idosos e apresenta como etiologia predominante nessa população à degeneração da mácula utricular. OBJETIVO: Comparar a eficácia das condutas pós-manobra de Epley. Desenho do Estudo: Estudo de coorte contemporâneo longitudinal. MATERIAL E MÉTODO: Participaram do estudo 53 voluntários com Vertigem Postural Paroxística Benigna de canal semicircular posterior, distribuídos em Grupo 1, submetidos à manobra de Epley associada ao uso do colar cervical e orientações pós-manobra; Grupo 2 submetido a manobra de Epley sem uso do colar cervical e/ou restrições pós-manobra, e Grupo 3 submetido à manobra de Epley associada com o uso de um minivibrador, sem uso de colar cervical e/ou restrições pós-manobra. RESULTADOS: Nos três grupos, o número de manobras de Epley variou de uma a três. Aplicou-se o Dizziness Handicap Inventory brasileiro pré e pós-tratamento e observou-se diferença estatisticamente significativa na maioria dos escores pré e pós-tratamento para os grupos avaliados. CONCLUSÃO: Independentemente da conduta pós-manobra de Epley selecionada para o tratamento da Vertigem Postural Paroxística Benigna, essa se mostrou eficaz quando se comparou o Dizziness Handicap Inventory brasileiro pré e pós-tratamento.Benign Paroxysmal Positional Vertigo is the most common peripheral vestibular disorder, especially in the elderly and presents as the predominant etiology in this population of the degeneration of the utricular macula. AIM: To compare the effectiveness of the approaches after Epley maneuver. Study Design: longitudinal cohort. MATERIALS AND METHODS: The study included 53 volunteers with Benign Paroxysmal Positional Vertigo of the posterior semicircular canal, divided into Group 1, who underwent Epley maneuver associated with the use of neck collar and post-maneuver instructions, Group 2 underwent the Epley

Highly Efficient Multi Channel Packet Forwarding with Round Robin Intermittent Periodic Transmit for Multihop Wireless Backhaul Networks

Science.gov (United States)

Furukawa, Hiroshi

2017-01-01

Round Robin based Intermittent Periodic Transmit (RR-IPT) has been proposed which achieves highly efficient multi-hop relays in multi-hop wireless backhaul networks (MWBN) where relay nodes are 2-dimensionally deployed. This paper newly investigates multi-channel packet scheduling and forwarding scheme for RR-IPT. Downlink traffic is forwarded by RR-IPT via one of the channels, while uplink traffic and part of downlink are accommodated in the other channel. By comparing IPT and carrier sense multiple access with collision avoidance (CSMA/CA) for uplink/downlink packet forwarding channel, IPT is more effective in reducing packet loss rate whereas CSMA/CA is better in terms of system throughput and packet delay improvement. PMID:29137164

Research on channel characteristics of differential multi pulse position modulation without background noise

Science.gov (United States)

Gao, Zhuo; Zhan, Weida; Sun, Quan; Hao, Ziqiang

2018-04-01

Differential multi-pulse position modulation (DMPPM) is a new type of modulation technology. There is a fast transmission rate, high bandwidth utilization, high modulation rate characteristics. The study of DMPPM modulation has important scientific value and practical significance. Channel capacity is one of the important indexes to measure the communication capability of communication system, and studying the channel capacity of DMPPM without background noise is the key to analyze the characteristics of DMPPM. The DMPPM theoretical model is established. The symbol structure of DMPPM with guard time slot is analyzed, and the channel capacity expression of DMPPM is deduced. Simulation analysis by MATLAB. The curves of unit channel capacity and capacity efficiency at different pulse and photon counting rates are analyzed. The results show that DMPPM is more advantageous than multi-pulse position modulation (MPPM), and is more suitable for future wireless optical communication system.

A low power Multi-Channel Analyzer

International Nuclear Information System (INIS)

Anderson, G.A.; Brackenbush, L.W.

1993-06-01

The instrumentation used in nuclear spectroscopy is generally large, is not portable, and requires a lot of power. Key components of these counting systems are the computer and the Multi-Channel Analyzer (MCA). To assist in performing measurements requiring portable systems, a small, very low power MCA has been developed at Pacific Northwest Laboratory (PNL). This MCA is interfaced with a Hewlett Packard palm top computer for portable applications. The MCA can also be connected to an IBM/PC for data storage and analysis. In addition, a real-time time display mode allows the user to view the spectra as they are collected

Multi-Channel Amplifier-Discriminator for Highly Time-Resolved Detection

CERN Document Server

Despeisse, M; Lapington, J; Jarron, P

2011-01-01

A low-power multi-channel amplifier-discriminator was developed for application in highly time-resolved detection systems. The proposed circuit architecture, so-called Nino, is based on a time-over-threshold approach and shows a high potential for time-resolved readout of solid-state photo-detectors and of detectors based on vacuum technologies. The Irpics circuit was designed in a 250 nm CMOS technology, implementing 32 channels of a Nino version optimized to achieve high-time resolution on the output low-voltage differential signals (LVDS) while keeping a low power consumption of 10 mW per channel. Electrical characterizations of the circuit demonstrate a very low intrinsic time jitter on the output pulse leading edge, measured below 10 ps rms for each channel for high input signal charges (100 fC) and below 25 ps rms for low input signal charges (20-100 fC). The read-out architecture moreover permits to retrieve the input signal charge from the timing measurements, while a calibration procedure was develop...

Evaluation of the accuracy of linear measurements on multi-slice and cone beam computed tomography scans to detect the mandibular canal during bilateral sagittal split osteotomy of the mandible.

Science.gov (United States)

Freire-Maia, B; Machado, V deC; Valerio, C S; Custódio, A L N; Manzi, F R; Junqueira, J L C

2017-03-01

The aim of this study was to compare the accuracy of linear measurements of the distance between the mandibular cortical bone and the mandibular canal using 64-detector multi-slice computed tomography (MSCT) and cone beam computed tomography (CBCT). It was sought to evaluate the reliability of these examinations in detecting the mandibular canal for use in bilateral sagittal split osteotomy (BSSO) planning. Eight dry human mandibles were studied. Three sites, corresponding to the lingula, the angle, and the body of the mandible, were selected. After the CT scans had been obtained, the mandibles were sectioned and the bone segments measured to obtain the actual measurements. On analysis, no statistically significant difference was found between the measurements obtained through MSCT and CBCT, or when comparing the measurements from these scans with the actual measurements. It is concluded that the images obtained by CT scan, both 64-detector multi-slice and cone beam, can be used to obtain accurate linear measurements to locate the mandibular canal for preoperative planning of BSSO. The ability to correctly locate the mandibular canal during BSSO will reduce the occurrence of neurosensory disturbances in the postoperative period. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Variation of nanopore diameter along porous anodic alumina channels by multi-step anodization.

Science.gov (United States)

Lee, Kwang Hong; Lim, Xin Yuan; Wai, Kah Wing; Romanato, Filippo; Wong, Chee Cheong

2011-02-01

In order to form tapered nanocapillaries, we investigated a method to vary the nanopore diameter along the porous anodic alumina (PAA) channels using multi-step anodization. By anodizing the aluminum in either single acid (H3PO4) or multi-acid (H2SO4, oxalic acid and H3PO4) with increasing or decreasing voltage, the diameter of the nanopore along the PAA channel can be varied systematically corresponding to the applied voltages. The pore size along the channel can be enlarged or shrunken in the range of 20 nm to 200 nm. Structural engineering of the template along the film growth direction can be achieved by deliberately designing a suitable voltage and electrolyte together with anodization time.

Water Environment Evolution along the China Grand Canal

International Nuclear Information System (INIS)

Mao, F; Wu, Y X; Yang, B F; Li, X J

2014-01-01

The China Grand Canal is one of the earliest canals in the world, having lasted for nearly 3000 years. Even its section canals have a rich history, such as the North-South Grand Canal that was established during the Sui Dynasty, whereas the Beijing-Hangzhou Canal was excavated during the Yuan Dynasty and the east line of the South-to-North Water Diversion. As one of the longest in the world, the China Grand Canal's total length is over 3500 kilometers. This length includes the navigable, unnavigable, and underground sections. Making the best use of situations and according to local conditions, the Chinese people harmoniously constructed the Beijing-Hangzhou Canal with nature. Tens of millions of workers took nearly 3000 years to complete the great shipping system. Navigable sections still exist for up to 900 kilometers and the volume of freight traffic is approximately 300 million tons. The canal remains the main logistical channel of the North-to-South Coal Transportation, South-to-North Water Diversion, and resources circulation. To date, China is promoting the success of heritage application. Part of these efforts is the declaration of the China Grand Canal as a World Cultural Heritage by 2014. In addition, the east route of the South-to-North Water Transfer project is planned to be navigable by 2016. The ancient Beijing-Hangzhou Grand Canal will usher in the new ecological civilization and cultural revival along the canal. This paper presents technical methods of water environment evolution research on the river system, river, and water quality along the Beijing-Hangzhou Canal through the integration of historical literature and modern remote sensing image data. The study carried out water environment investigation and analysis along the Beijing-Hangzhou canal by using ETM, SPOT image data, and GPS measurement data. Spatial and temporal evolution characteristics and regulations of the Beijing-Hangzhou Grand Canal regional water environment in the span of

Multi-channel spintronic transistor design based on magnetoelectric barriers and spin-orbital effects

International Nuclear Information System (INIS)

Fujita, T; Jalil, M B A; Tan, S G

2008-01-01

We present a spin transistor design based on spin-orbital interactions in a two-dimensional electron gas, with magnetic barriers induced by a patterned ferromagnetic gate. The proposed device overcomes certain shortcomings of previous spin transistor designs such as long device length and degradation of conductance modulation for multi-channel transport. The robustness of our device for multi-channel transport is unique in spin transistor designs based on spin-orbit coupling. The device is more practical in fabrication and experimental respects compared to previously conceived single-mode spin transistors

Coordinating Multi-Channel Pricing of Seasonal Goods

OpenAIRE

Preetam Basu

2012-01-01

Advancement in information technology has opened new avenues for traditional retailers to expand their operations. Pricing, which has been a critical issue, is more important than ever before as traditional retailers pursue multi-channel sales. In this paper the author studies the pricing problem of a retailer selling a seasonal product simultaneously in a ‘brick and mortar’ store as well as online. Optimal prices are derived and different product-market conditions are determined under wh...

Zinc-dependent multi-conductance channel activity in mitochondria isolated from ischemic brain.

Science.gov (United States)

Bonanni, Laura; Chachar, Mushtaque; Jover-Mengual, Teresa; Li, Hongmei; Jones, Adrienne; Yokota, Hidenori; Ofengeim, Dimitry; Flannery, Richard J; Miyawaki, Takahiro; Cho, Chang-Hoon; Polster, Brian M; Pypaert, Marc; Hardwick, J Marie; Sensi, Stefano L; Zukin, R Suzanne; Jonas, Elizabeth A

2006-06-21

Transient global ischemia is a neuronal insult that induces delayed cell death. A hallmark event in the early post-ischemic period is enhanced permeability of mitochondrial membranes. The precise mechanisms by which mitochondrial function is disrupted are, as yet, unclear. Here we show that global ischemia promotes alterations in mitochondrial membrane contact points, a rise in intramitochondrial Zn2+, and activation of large, multi-conductance channels in mitochondrial outer membranes by 1 h after insult. Mitochondrial channel activity was associated with enhanced protease activity and proteolytic cleavage of BCL-xL to generate its pro-death counterpart, deltaN-BCL-xL. The findings implicate deltaN-BCL-xL in large, multi-conductance channel activity. Consistent with this, large channel activity was mimicked by introduction of recombinant deltaN-BCL-xL to control mitochondria and blocked by introduction of a functional BCL-xL antibody to post-ischemic mitochondria via the patch pipette. Channel activity was also inhibited by nicotinamide adenine dinucleotide, indicative of a role for the voltage-dependent anion channel (VDAC) of the outer mitochondrial membrane. In vivo administration of the membrane-impermeant Zn2+ chelator CaEDTA before ischemia or in vitro application of the membrane-permeant Zn2+ chelator tetrakis-(2-pyridylmethyl) ethylenediamine attenuated channel activity, suggesting a requirement for Zn2+. These findings reveal a novel mechanism by which ischemic insults disrupt the functional integrity of the outer mitochondrial membrane and implicate deltaN-BCL-xL and VDAC in the large, Zn2+-dependent mitochondrial channels observed in post-ischemic hippocampal mitochondria.

JADSPE, Multi-Channel Gamma Spectra Unfolding Program

International Nuclear Information System (INIS)

Rikovska, J.; Stejskalova, E.

2005-01-01

1 - Description of program or function: JADSPE is a package of eight programs to process multi-channel gamma-ray spectra. The programs can be used to: - locate automatically spectral peaks and calculate their positions, areas, and full widths at half maximum (FWHM); - plot the spectra on a CALCOMP plotter, TEKTRONIX terminal or a line printer; - add or subtract several spectra with the possibility of adjusting either their start and end channels or the maxima of the chosen corresponding peaks. The JADSPE package comprises the following programs: - SPECTF: automatic location of peaks and calculation of their positions, areas and FWHMS. The standard deviations of peak parameters are also determined, and each evaluated region is plotted on the line printer. - SPECT1: The areas and FWHMs are calculated for peaks whose positions are known beforehand. The standard deviations of calculated parameters are also determined, and each evaluated region is plotted on the line printer. - PLOCHA: The peak net area is calculated by summing the channel contents in specified regions and by subtracting a linear background. - GRAPH: Spectrum plotting on the line printer. - PLTNEW: Spectrum plotting on CALCOMP plotter or on TEKTRONIX terminal. - SUMDIF: The channel contents of several gamma-ray spectra are added or subtracted. - SSPFP: The channel contents of several gamma-ray spectra are added with adjustment of the maxima of specified peaks. - SOUCET: The channel contents of several gamma-ray spectra are added with the adjustment of start and end channels of the spectra. 2 - Method of solution: Non-linear least-square fit. 3 - Restrictions on the complexity of the problem: The full energy peaks are approximated by a symmetrical Gaussian function and the underlying background is approximated by a first-order polynomial. A fixed spectrum length of 4096 channels is assumed. Maxima of: - number of peaks in one multiplet: 9; - number of peaks identified by the automatic search procedure

The impact of the multi-channel retail mix on online store choice: Does online experience matter?

OpenAIRE

Melis, Kristina; Campo, Katia; Breugelmans, Els; Lamey, Lien

2015-01-01

More and more grocery retailers are becoming multi-channel retailers, as they are opening an online alternative next to their traditional offline supermarkets. While the number of multi-channel grocery shoppers is also expanding at a fast growth rate, there are still large differences in online shopping frequency, and as a result, in the levels of experience with buying in the online grocery channel. This study wants to (i) identify the underlying drivers of online store choice and (ii) explo...

Wireless acquisition of multi-channel seismic data using the Seismobile system

Science.gov (United States)

Isakow, Zbigniew

2017-11-01

This paper describes the wireless acquisition of multi-channel seismic data using a specialized mobile system, Seismobile, designed for subsoil diagnostics for transportation routes. The paper presents examples of multi-channel seismic records obtained during system tests in a configuration with 96 channels (4 landstreamers of 24-channel) and various seismic sources. Seismic waves were generated at the same point using different sources: a 5-kg hammer, a Gisco's source with a 90-kg pile-driver, and two other the pile-drivers of 45 and 70 kg. Particular attention is paid to the synchronization of source timing, the measurement of geometry by autonomous GPS systems, and the repeatability of triggering measurements constrained by an accelerometer identifying the seismic waveform. The tests were designed to the registration, reliability, and range of the wireless transmission of survey signals. The effectiveness of the automatic numbering of measuring modules was tested as the system components were arranged and fixed to the streamers. After measurements were completed, the accuracy and speed of data downloading from the internal memory (SDHC 32GB WiFi) was determined. Additionally, the functionality of automatic battery recharging, the maximum survey duration, and the reliability of battery discharge signalling were assessed.

Galvanically Decoupled Current Source Modules for Multi-Channel Bioimpedance Measurement Systems

Directory of Open Access Journals (Sweden)

Roman Kusche

2017-10-01

Full Text Available Bioimpedance measurements have become a useful technique in the past several years in biomedical engineering. Especially, multi-channel measurements facilitate new imaging and patient monitoring techniques. While most instrumentation research has focused on signal acquisition and signal processing, this work proposes the design of an excitation current source module that can be easily implemented in existing or upcoming bioimpedance measurement systems. It is galvanically isolated to enable simultaneous multi-channel bioimpedance measurements with a very low channel-coupling. The system is based on a microcontroller in combination with a voltage-controlled current source circuit. It generates selectable sinusoidal excitation signals between 0.12 and 1.5 mA in a frequency range from 12 to 250 kHz, whereas the voltage compliance range is ±3.2 V. The coupling factor between two current sources, experimentally galvanically connected with each other, is measured to be less than −48 dB over the entire intended frequency range. Finally, suggestions for developments in the future are made.

Otolith and Vertical Canal Contributions to Dynamic Postural Control

Science.gov (United States)

Black, F. Owen

1999-01-01

The objective of this project is to determine: 1) how do normal subjects adjust postural movements in response to changing or altered otolith input, for example, due to aging? and 2) how do patients adapt postural control after altered unilateral or bilateral vestibular sensory inputs such as ablative inner ear surgery or ototoxicity, respectively? The following hypotheses are under investigation: 1) selective alteration of otolith input or abnormalities of otolith receptor function will result in distinctive spatial, frequency, and temporal patterns of head movements and body postural sway dynamics. 2) subjects with reduced, altered, or absent vertical semicircular canal receptor sensitivity but normal otolith receptor function or vice versa, should show predictable alterations of body and head movement strategies essential for the control of postural sway and movement. The effect of altered postural movement control upon compensation and/or adaptation will be determined. These experiments provide data for the development of computational models of postural control in normals, vestibular deficient subjects and normal humans exposed to unusual force environments, including orbital space flight.

Semicircular Horizontal Approach in Breast Reduction: Clinical Experience in 38 Cases

Directory of Open Access Journals (Sweden)

Hee Su Shin

2015-07-01

Full Text Available BackgroundVarious techniques are used for performing breast reduction. Wise-pattern and vertical scar techniques are the most commonly employed approaches. However, a vertical scar in the mid-lower breast is prominent and aesthetically less pleasant. In contrast, a semicircular horizontal approach does not leave a vertical scar in the mid breast and transverse scars can be hidden in the inframammary fold. In this paper, we describe the experiences and results of semicircular horizontal breast reductions performed by a single surgeon.MethodsBetween September 1996 and October 2013, our senior author used this technique in 38 cases in the US and at our institution. We used a superiorly based semicircular incision, where the upper skin paddle was pulled down to the inframammary fold with the nipple-areola complex pulled through the keyhole.ResultsThe average total reduction per breast was 584 g, ranging from 286 to 794 g. The inferior longitudinal pedicle was used in all the cases. The average reduction of the distance from the sternal notch to the nipple was 13 cm (range, 11-15 cm. The mean decrease in the bra cup size was 1.7 cup sizes (range, a decrease of 1 to 3. We obtained very satisfactory results with a less noticeable scar, no complication such as necrosis of the nipple or the skin flap, wound infection, aseptic necrosis of the breast tissue, or wound dehiscence. One patient had a small hematoma that resolved spontaneously.ConclusionsThis technique is straightforward and easy to learn, and offers a safe, effective, and predictable way for treating mammary hypertrophy.

Integrated multi-channel vehicle-vehicle and vehicle-roadside communications for ITS

Science.gov (United States)

2008-12-01

This research describes a medium access control (MAC) protocol to Enable multi-channel operation for dedicated short-range communication (DSRC). In particular, we focus on the challenge of supporting potentially high-bandwidth commercial or infotainm...

Feasibility study of applying a multi-channel analysis model to on-line core monitoring system

International Nuclear Information System (INIS)

In, W. K.; Yoo, Y. J.; Hwang, D. H.; Jun, T. H.

1998-01-01

A feasibility study was performed to evaluate the effect of implementing a multi-channel analysis model in on-line core monitoring system. A simplified thermal-hydraulic model has been used in the on-line core monitoring system of digital PWR. The design procedure, core thermal margin and computation time were investigated in case of replacing the simplified model with the multi-channel analysis model. For the given ranges of limiting conditions for operation in Yonggwang Unit 3 Cycle 1, the minimum DNBR of the simplified thermal-hydraulic code CETOP-D was compared to that of the multi-channel analysis code MATRA. A CETOP-D tuning is additionally required to ensure the accurate and conservative DNBR calculation but the MATRA tuning is not necessary. MATRA appeared to increase the DNBR overpower margin from 2.5% to 6% over the CETOP-D margin. MATRA took approximately 1 second to compute DNBR on the HP9000 workstation system, which is longer than the DNBR computation time of CETOP-D. It is, however, fast enough to perform the on-line monitoring of DNBR. It can be therefore concluded that the application of the multi-channel analysis model MATRA in the on-line core monitoring system is feasible

Aproximación a la definición de Canal Infantil Politemático de televisión

Directory of Open Access Journals (Sweden)

Melgarejo Moreno, Irene

2012-02-01

Full Text Available En español: La digitalización ha propiciado una nueva forma de concebir los canales de televisión; son diversos los autores que han tratado esta temática –Cebrián (2004, Alcolea (2003, Bustamante (1999, etc.-, sin embargo, las aproximaciones que se han hecho en materia de canales temáticos infantiles resultan un tanto superfluas. Se realiza una revisión de las teorías existentes sobre televisión, infancia y canales temáticos que nos lleva a poder aportar una nueva terminología y a formular una aproximación a la definición de Canal Infantil Politemático, fiel reflejo de la realidad televisiva del siglo XXI. In english: The digitalization has created a new way to understand the television channels. There are several authors that have studied this theme –Cebrián (2004, Alcolea (2003, Bustamante (1999, etc. -, however, the approaches that have been made about thematic children’s channels are quite superfluous. This article carries out a revision of the existing theories about television, chilhood and thematic channels that provides a new terminology and formulates an approach to the Polithematic Children´s Channel definition, which shows the XXI Century television reality.

Development of refined MCNPX-PARET multi-channel model for transient analysis in research reactors

Energy Technology Data Exchange (ETDEWEB)

Kalcheva, S.; Koonen, E. [SCK-CEN, BR2 Reactor Dept., Boeretang 200, 2400 Mol (Belgium); Olson, A. P. [RERTR Program, Nuclear Engineering Div., Argonne National Laboratory, Cass Avenue, Argonne, IL 60439 (United States)

2012-07-01

Reactivity insertion transients are often analyzed (RELAP, PARET) using a two-channel model, representing the hot assembly with specified power distribution and an average assembly representing the remainder of the core. For the analysis of protected by the reactor safety system transients and zero reactivity feedback coefficients this approximation proves to give adequate results. However, a more refined multi-channel model representing the various assemblies, coupled through the reactivity feedback effects to the whole reactor core is needed for the analysis of unprotected transients with excluded over power and period trips. In the present paper a detailed multi-channel PARET model has been developed which describes the reactor core in different clusters representing typical BR2 fuel assemblies. The distribution of power and reactivity feedback in each cluster of the reactor core is obtained from a best-estimate MCNPX calculation using the whole core geometry model of the BR2 reactor. The sensitivity of the reactor response to power, temperature and energy distributions is studied for protected and unprotected reactivity insertion transients, with zero and non-zero reactivity feedback coefficients. The detailed multi-channel model is compared vs. simplified fewer-channel models. The sensitivities of transient characteristics derived from the different models are tested on a few reactivity insertion transients with reactivity feedback from coolant temperature and density change. (authors)

Multi-channel integrated circuits for the detection and measurement of ionizing radiation

International Nuclear Information System (INIS)

Engel, G.L.; Duggireddi, N.; Vangapally, V.; Elson, J.M.; Sobotka, L.G.; Charity, R.J.

2011-01-01

The Integrated Circuits (IC) Design Research Laboratory at Southern Illinois University Edwardsville (SIUE) has collaborated with the Nuclear Reactions Group at Washington University (WU) to develop a family of multi-channel integrated circuits. To date, the collaboration has successfully produced two micro-chips. The first was an analog shaped and peak sensing chip with on-board constant-fraction discriminators and sparsified readout. This chip is known as Heavy-Ion Nuclear Physics-16 Channel (HINP16C). The second chip, christened PSD8C, was designed to logically complement (in terms of detector types) the HINP16C chip. Pulse Shape Discrimination-8 Channel (PSD8C), featuring three settable charge integration windows per channel, performs pulse shape discrimination (PSD). This paper summarizes the design, capabilities, and features of the HINP16C and PSD8C ICs. It proceeds to discuss the modifications, made to the ICs and their associated systems, which have attempted to improve ease of use, increase performance, and extend capabilities. The paper concludes with a brief discussion of what may be the next chip (employing a multi-sampling scheme) to be added to our CMOS ASIC 'tool box' for radiation detection instrumentation.

D1.3 -- Short Report on the First Draft Multi-link Channel Model

DEFF Research Database (Denmark)

Pedersen, Troels; Raulefs, Ronald; Steinboeck, Gerhard

This deliverable is a preliminary report on the activities towards multi-link channel models. It summarizes the activities and achievements of investigations of WP1 Task 1.2 in the first year of the project. In this deliverable work focuses on the characterization of the crosscorrelation of multi...

A review of potential tsunami impacts to the Suez Canal

Science.gov (United States)

Finkl, C.; Pelinovsky, E.

2012-04-01

Destructive tsunamis in the eastern Mediterranean and Red seas, induced by earthquakes and/or volcanic activity, pose potential hazards to docked seaport shipping and fixed harbor infrastructure as well as to in-transit international shipping within the Suez Canal. Potential vulnerabilities of the Suez Canal to possible tsunami impacts are reviewed by reference to geological, historical, archaeoseismological, and anecdotal data. Tsunami catalogues and databases compiled by earlier researchers are perused to estimate potential return periods for tsunami events that could affect directly the Suez Canal and its closely associated operational infrastructures. Analysis of these various records indicates a centurial return period, or multiples thereof, for long-wave repetition that could generally affect the Nile Delta. It is estimated that tsunami waves 2 m high would have a breaking length about 5 km down Canal whereas a 10 m wave break would occur about 1 km into the Canal. Should a tsunami strike the eastern flanks of the Nile Delta, it would damage Egypt's maritime infrastructure and multi-national commercial vessels and military ships then using the Canal.

Hydrogeological effects of dredging navigable canals through lagoon shallows. A case study in Venice

Directory of Open Access Journals (Sweden)

P. Teatini

2017-11-01

Full Text Available For the first time a comprehensive investigation has been carried out to quantify the possible effects of dredging a navigable canal on the hydrogeological system underlying a coastal lagoon. The study is focused on the Venice Lagoon, Italy, where the port authority is planning to open a new 10 m deep and 3 km long canal to connect the city passenger terminal to the central lagoon inlet, thus avoiding the passage of large cruise ships through the historic center of Venice. A modeling study has been developed to evaluate the short (minutes, medium (months, and long (decades term processes of water and pollutant exchange between the shallow aquifer system and the lagoon, possibly enhanced by the canal excavation, and ship wakes. An in-depth characterization of the lagoon subsurface along the channel has supported the numerical modeling. Piezometer and sea level records, geophysical acquisitions, laboratory analyses of groundwater and sediment samples (chemical analyses and ecotoxicity testing, and the outcome of 3-D hydrodynamic and computational fluid dynamic (CFD models have been used to set up and calibrate the subsurface multi-model approach. The numerical outcomes allow us to quantify the groundwater volume and estimate the mass of anthropogenic contaminants (As, Cd, Cu, Cr, Hg, Pb, Se likely leaked from the nearby industrial area over the past decades, and released into the lagoon from the canal bed by the action of depression waves generated by ships. Moreover, the model outcomes help to understand the effect of the hydrogeological layering on the propagation of the tidal fluctuation and salt concentration into the shallow brackish aquifers underlying the lagoon bottom.

Multi-Channel Electronically Scanned Cryogenic Pressure Sensor And Method For Making Same

Science.gov (United States)

Chapman, John J. (Inventor); Hopson, Purnell, Jr. (Inventor); Holloway, Nancy M. (Inventor)

2001-01-01

A miniature, multi-channel, electronically scanned pressure measuring device uses electrostatically bonded silicon dies in a multi-element array. These dies are bonded at specific sites on a glass, pre-patterned substrate. Thermal data is multiplexed and recorded on each individual pressure measuring diaphragm. The device functions in a cryogenic environment without the need of heaters to keep the sensor at constant temperatures.

A multi-species multi-fleet bioeconomic simulation model for the English Channel artisanal fisheries

DEFF Research Database (Denmark)

Ulrich, Clara; Le Gallic, B.; Dunn, M.R.

2002-01-01

Considering the large number of technical interactions between various fishing activities, the English Channel (ICES divisions VIId and VIIe) fisheries may be regarded as one large and diverse multi-country, multi-gear and multi-species artisanal fishery, although rarely studied as such. A whole...... of the model is to study the long-term consequences of various management alternatives on the economic situation of the English and French fleets fishing in the area and on exploited resources. The model describes this feature through the links between three entities on the one hand (stocks, fleets...... and "metiers", i.e. gear x target species x fishing area), and three modules on the other hand (activity, biological production and economics). The model is described and some simulation results are presented. An example simulating a decrease of one fleet segment effort illustrates these technical interactions...

Multi-channel electrical impedance tomography for regional tissue hydration monitoring

International Nuclear Information System (INIS)

Chen, Xiaohui; Kao, Tzu-Jen; Ashe, Jeffrey M; Boverman, Gregory; Sabatini, James E; Davenport, David M

2014-01-01

Poor assessment of hydration status during hemodialysis can lead to under- or over-hydration in patients with consequences of increased morbidity and mortality. In current practice, fluid management is largely based on clinical assessments to estimate dry weight (normal hydration body weight). However, hemodialysis patients usually have co-morbidities that can make the signs of fluid status ambiguous. Therefore, achieving normal hydration status remains a major challenge for hemodialysis therapy. Electrical impedance technology has emerged as a promising method for hydration monitoring due to its non-invasive nature, low cost and ease-of-use. Conventional electrical impedance-based hydration monitoring systems employ single-channel current excitation (either 2-electrode or 4-electrode methods) to perturb and extract averaged impedance from bulk tissue and use generalized models from large populations to derive hydration estimates. In the present study, a prototype, single-frequency electrical impedance tomography (EIT) system with simultaneous multi-channel current excitation was used to enable regional hydration change detection. We demonstrated the capability to detect a difference in daily impedance change between left leg and right leg in healthy human subjects, who wore a compression sock only on one leg to reduce daily gravitational fluid accumulation. The impedance difference corresponded well with the difference of lower leg volume change between left leg and right leg measured by volumetry, which on average is ∼35 ml, accounting for 0.7% of the lower leg volume. We have demonstrated the feasibility of using multi-channel EIT to extract hydration information in different tissue layers with minimal skin interference. Our simultaneous, multi-channel current excitation approach provides an effective method to separate electrode contact impedance and skin condition artifacts from hydration signals. The prototype system has the potential to be used in

Multi-channel electrical impedance tomography for regional tissue hydration monitoring.

Science.gov (United States)

Chen, Xiaohui; Kao, Tzu-Jen; Ashe, Jeffrey M; Boverman, Gregory; Sabatini, James E; Davenport, David M

2014-06-01

Poor assessment of hydration status during hemodialysis can lead to under- or over-hydration in patients with consequences of increased morbidity and mortality. In current practice, fluid management is largely based on clinical assessments to estimate dry weight (normal hydration body weight). However, hemodialysis patients usually have co-morbidities that can make the signs of fluid status ambiguous. Therefore, achieving normal hydration status remains a major challenge for hemodialysis therapy. Electrical impedance technology has emerged as a promising method for hydration monitoring due to its non-invasive nature, low cost and ease-of-use. Conventional electrical impedance-based hydration monitoring systems employ single-channel current excitation (either 2-electrode or 4-electrode methods) to perturb and extract averaged impedance from bulk tissue and use generalized models from large populations to derive hydration estimates. In the present study, a prototype, single-frequency electrical impedance tomography (EIT) system with simultaneous multi-channel current excitation was used to enable regional hydration change detection. We demonstrated the capability to detect a difference in daily impedance change between left leg and right leg in healthy human subjects, who wore a compression sock only on one leg to reduce daily gravitational fluid accumulation. The impedance difference corresponded well with the difference of lower leg volume change between left leg and right leg measured by volumetry, which on average is ~35 ml, accounting for 0.7% of the lower leg volume. We have demonstrated the feasibility of using multi-channel EIT to extract hydration information in different tissue layers with minimal skin interference. Our simultaneous, multi-channel current excitation approach provides an effective method to separate electrode contact impedance and skin condition artifacts from hydration signals. The prototype system has the potential to be used in clinical

A Receiver-Initiated Collision-Avoidance Protocol for Multi-Channel Networks

Science.gov (United States)

2001-01-01

00-00-2001 to 00-00-2001 4. TITLE AND SUBTITLE A Receiver-Initiated Collision-Avoidance Protocol for Multi-Channel Netowrks 5a. CONTRACT NUMBER...images. 14. ABSTRACT 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 10 19a. NAME OF RESPONSIBLE

A strategy for determination of test intervals of k-out-of-n multi-channel systems

International Nuclear Information System (INIS)

Cho, S.; Jiang, J.

2007-01-01

State space models for determination of the optimal test frequencies for k-out-of-n multi channel systems are developed in this paper. The analytic solutions for the optimal surveillance test frequencies are derived using the Markov process technique. The solutions show that an optimal test frequency which maximizes the target probability can be determined by decomposing the system states to 3 states based on the system configuration and success criteria. Examples of quantification of the state probabilities and the optimal test frequencies of a three-channel system and a four-channel system with different success criteria are presented. The strategy for finding the optimal test frequency developed in this paper can generally be applicable to any k-out-of-n multi-channel standby systems that involve complex testing schemes. (author)

Development of multi-channel gated integrator and PXI-DAQ system for nuclear detector arrays

International Nuclear Information System (INIS)

Kong Jie; Su Hong; Chen Zhiqiang; Dong Chengfu; Qian Yi; Gao Shanshan; Zhou Chaoyang; Lu Wan; Ye Ruiping; Ma Junbing

2010-01-01

A multi-channel gated integrator and PXI based data acquisition system have been developed for nuclear detector arrays with hundreds of detector units. The multi-channel gated integrator can be controlled by a programmable GI controller. The PXI-DAQ system consists of NI PXI-1033 chassis with several PXI-DAQ cards. The system software has a user-friendly GUI which is written in C language using LabWindows/CVI under Windows XP operating system. The performance of the PXI-DAQ system is very reliable and capable of handling event rate up to 40 kHz.

Multi-DSP and FPGA based Multi-channel Direct IF/RF Digital receiver for atmospheric radar

Science.gov (United States)

Yasodha, Polisetti; Jayaraman, Achuthan; Kamaraj, Pandian; Durga rao, Meka; Thriveni, A.

2016-07-01

Modern phased array radars depend highly on digital signal processing (DSP) to extract the echo signal information and to accomplish reliability along with programmability and flexibility. The advent of ASIC technology has made various digital signal processing steps to be realized in one DSP chip, which can be programmed as per the application and can handle high data rates, to be used in the radar receiver to process the received signal. Further, recent days field programmable gate array (FPGA) chips, which can be re-programmed, also present an opportunity to utilize them to process the radar signal. A multi-channel direct IF/RF digital receiver (MCDRx) is developed at NARL, taking the advantage of high speed ADCs and high performance DSP chips/FPGAs, to be used for atmospheric radars working in HF/VHF bands. Multiple channels facilitate the radar t be operated in multi-receiver modes and also to obtain the wind vector with improved time resolution, without switching the antenna beam. MCDRx has six channels, implemented on a custom built digital board, which is realized using six numbers of ADCs for simultaneous processing of the six input signals, Xilinx vertex5 FPGA and Spartan6 FPGA, and two ADSPTS201 DSP chips, each of which performs one phase of processing. MCDRx unit interfaces with the data storage/display computer via two gigabit ethernet (GbE) links. One of the six channels is used for Doppler beam swinging (DBS) mode and the other five channels are used for multi-receiver mode operations, dedicatedly. Each channel has (i) ADC block, to digitize RF/IF signal, (ii) DDC block for digital down conversion of the digitized signal, (iii) decoding block to decode the phase coded signal, and (iv) coherent integration block for integrating the data preserving phase intact. ADC block consists of Analog devices make AD9467 16-bit ADCs, to digitize the input signal at 80 MSPS. The output of ADC is centered around (80 MHz - input frequency). The digitized data is fed

A novel portable multi-channel analyzer based on high-speed microcontroller

International Nuclear Information System (INIS)

Lou Xinghua; Yi Hongchang; Wang Yuemin

2005-01-01

This paper introduces a novel portable multi-channel analyzer (MCA) based on high-speed microcontroller. The hardware implementation and the software scenario of the MCA are discussed. The MCA has features of high speed, small size and better performances. (authors)

ANALYSIS OF REMOTE SENSING ARCHAEOLOGY ON TRAFFIC FUNCTION TRANSFORMATION OF TONGJI GRAND CANAL IN SUI AND TANG DYNASTIES

Institute of Scientific and Technical Information of China (English)

WANG Xin-yuan; HE Hui; ZHOU Ying-qiu; GAO Chao; HAN Shuang-wang

2006-01-01

In China, most directions of river flowing are from west to east. During historic period, since the water traffic played an important role, it was very important to form a cross-horizontal net of water carriage route. Canals should be dug so as to make up the lack of north-south river. Tongji Grand Canal, dug in the first year of Daye (605 A.D.) in the Sui Dynasty, was the important component of north-south system of Grand Canals in China. It promoted economic and social development of the Sui, Tang and Song dynasties (605 A.D.-1279 A.D.). As Tongji Canal (i.e.Tongji Grand Canal) flowed across the Huaibei Plain, which is aggraded by abundant mud and sand deposit resulted from the Huanghe (Yellow) River flooding, many traces (such as old channel) and human culture heritages were buried under mud-sand. Tongji Canal was silted up, and disappeared in the Jin Dynasty (1115 A.D.-1234 A.D.). From then on, there were many different stories about the flowing route of the canal in historical literature. Based on space-bone and air-bone remote sensing imagery, we attempt to search the old channel of Tongji Canal, and supplement historical record. The paper discusses transformation process of Tongji Canal's traffic function, and resumptively summarizes the reasons of the transformation, which results from synthetic function of physical geographical, political, economic, and social conditions.

Research on development of multi-channel analyzer used for monitoring and warning radiation equipment

International Nuclear Information System (INIS)

Nguyen Van Sy; Dang Quang Thieu; Nguyen Thi Bao My

2015-01-01

The subject assigned to this paper presents research on development of multi-channel analyzer used for monitoring and warning environmental radiation equipment under the project KC.05.16/11-15 Research on manufacturing equipment monitoring and warning radiation. In this thematic we have two subjects that need to be resolved such as: i) Designing spectroscopy amplifier block (AMP) duty pulse signals obtained about few hundred millivolts output from scintillation detector preamplifier, amplified as a few volts and the standard Gaussian pulses shaped to connect to the analog-to-digital converter. The spectroscopy amplifier block can change the gain by digital control to respond to the problem of automatic spectrum stability for multi-channel analyzer systems. ii) Designing analog-to-digital converter block (ADC) in accordance with the actual conditions, such as high stability, fast conversion time, high throughput, and it consumes low energy. Selecting suitable microprocessor for fast connection ability, to operate reliably paired with the analog-to-digital converter into a multi-channel analyzer (MCA) serving analysis. (author)

Multi-channel EEG-based sleep stage classification with joint collaborative representation and multiple kernel learning.

Science.gov (United States)

Shi, Jun; Liu, Xiao; Li, Yan; Zhang, Qi; Li, Yingjie; Ying, Shihui

2015-10-30

Electroencephalography (EEG) based sleep staging is commonly used in clinical routine. Feature extraction and representation plays a crucial role in EEG-based automatic classification of sleep stages. Sparse representation (SR) is a state-of-the-art unsupervised feature learning method suitable for EEG feature representation. Collaborative representation (CR) is an effective data coding method used as a classifier. Here we use CR as a data representation method to learn features from the EEG signal. A joint collaboration model is established to develop a multi-view learning algorithm, and generate joint CR (JCR) codes to fuse and represent multi-channel EEG signals. A two-stage multi-view learning-based sleep staging framework is then constructed, in which JCR and joint sparse representation (JSR) algorithms first fuse and learning the feature representation from multi-channel EEG signals, respectively. Multi-view JCR and JSR features are then integrated and sleep stages recognized by a multiple kernel extreme learning machine (MK-ELM) algorithm with grid search. The proposed two-stage multi-view learning algorithm achieves superior performance for sleep staging. With a K-means clustering based dictionary, the mean classification accuracy, sensitivity and specificity are 81.10 ± 0.15%, 71.42 ± 0.66% and 94.57 ± 0.07%, respectively; while with the dictionary learned using the submodular optimization method, they are 80.29 ± 0.22%, 71.26 ± 0.78% and 94.38 ± 0.10%, respectively. The two-stage multi-view learning based sleep staging framework outperforms all other classification methods compared in this work, while JCR is superior to JSR. The proposed multi-view learning framework has the potential for sleep staging based on multi-channel or multi-modality polysomnography signals. Copyright © 2015 Elsevier B.V. All rights reserved.

Hand Motion Classification Using a Multi-Channel Surface Electromyography Sensor

Directory of Open Access Journals (Sweden)

Dong Sun

2012-01-01

Full Text Available The human hand has multiple degrees of freedom (DOF for achieving high-dexterity motions. Identifying and replicating human hand motions are necessary to perform precise and delicate operations in many applications, such as haptic applications. Surface electromyography (sEMG sensors are a low-cost method for identifying hand motions, in addition to the conventional methods that use data gloves and vision detection. The identification of multiple hand motions is challenging because the error rate typically increases significantly with the addition of more hand motions. Thus, the current study proposes two new methods for feature extraction to solve the problem above. The first method is the extraction of the energy ratio features in the time-domain, which are robust and invariant to motion forces and speeds for the same gesture. The second method is the extraction of the concordance correlation features that describe the relationship between every two channels of the multi-channel sEMG sensor system. The concordance correlation features of a multi-channel sEMG sensor system were shown to provide a vast amount of useful information for identification. Furthermore, a new cascaded-structure classifier is also proposed, in which 11 types of hand gestures can be identified accurately using the newly defined features. Experimental results show that the success rate for the identification of the 11 gestures is significantly high.

Hand motion classification using a multi-channel surface electromyography sensor.

Science.gov (United States)

Tang, Xueyan; Liu, Yunhui; Lv, Congyi; Sun, Dong

2012-01-01

The human hand has multiple degrees of freedom (DOF) for achieving high-dexterity motions. Identifying and replicating human hand motions are necessary to perform precise and delicate operations in many applications, such as haptic applications. Surface electromyography (sEMG) sensors are a low-cost method for identifying hand motions, in addition to the conventional methods that use data gloves and vision detection. The identification of multiple hand motions is challenging because the error rate typically increases significantly with the addition of more hand motions. Thus, the current study proposes two new methods for feature extraction to solve the problem above. The first method is the extraction of the energy ratio features in the time-domain, which are robust and invariant to motion forces and speeds for the same gesture. The second method is the extraction of the concordance correlation features that describe the relationship between every two channels of the multi-channel sEMG sensor system. The concordance correlation features of a multi-channel sEMG sensor system were shown to provide a vast amount of useful information for identification. Furthermore, a new cascaded-structure classifier is also proposed, in which 11 types of hand gestures can be identified accurately using the newly defined features. Experimental results show that the success rate for the identification of the 11 gestures is significantly high.

A 900-channel coincidence pulse-amplitude analyser; Selecteur d'amplitudes d'impulsions a coincidence a trois dimensions; Devyatisotkanal'nyj amplitudnyj analizator impul'sov sovpadeniya; Analizador de amplitud de impulsos de coincidencia con 900 canales

Energy Technology Data Exchange (ETDEWEB)

Alexander, T K; Robinson, L B [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

1962-04-15

An analyser designed for correlation studies of pulse-height distributions from two scintillation counters is described. The analyser consists of two separate transistorized units; a dual-channel analogue-to-digital encoder and a 900-channel, 2{sup 16}-per-channel capacity ferrite-core store. The display and control unit for the instrument is separate and can be situated away from the analyser. The analysis mode of operation for coincident pulses on the A and B inputs of the encoder can be selected to be 30 by 30, 100 by 9 or 300 channels by 3 distributions. In the last two modes the base lines and the widths of the pulse-amplitude ''windows'' on distribution A can be selected by the operator. With 100 channels for pulse-amplitude analysis, eight ''windows'' in distribution A define eight groups of 100 channels for the B distributions. In this case we have, in effect, one 100-channel analyser for distribution A and eight separate 100-channel analysers to which B can be routed. A description of the basic circuits of the encoder and the logic of the store and display units is given. (author) [French] Le memoire decrit un selecteur concu pour etudier la correlation des distributions en amplitude des impulsions fournies par deux compteurs a scintillations. L'analyseur se compose de deux parties distinctes transistorisees: un codeur analogique/numerique a deux voies et une memoire a ferrites, a 900 canaux d'une capacite de 2{sup 16} par canal. Les tableaux d'enregistrement et les commandes de l'appareil forment un element autonome qui peut etre installe a une certaine distance du selecteur. Pour l'analyse des impulsions de coincidence aux entrees A et B du codeur, on peut combiner les canaux de trois manieres differentes: 30 x 30, 100 x 9 ou 300 x 3. Dans les deux derniers cas, l'operateur peut choisir les lignes de base et la largeur des des amplitudes d'impulsion pour la distribution A. Lorsque l'analyse de l'amplitude d'impulsion se fait avec 100 canaux

A wireless multi-channel bioimpedance measurement system for personalized healthcare and lifestyle.

Science.gov (United States)

Ramos, Javier; Ausín, José Luis; Lorido, Antonio Manuel; Redondo, Francisco; Duque-Carrillo, Juan Francisco

2013-01-01

Miniaturized, noninvasive, wearable sensors constitute a fundamental prerequisite for pervasive, predictive, and preventive healthcare systems. In this sense, this paper presents the design, realization, and evaluation of a wireless multi-channel measurement system based on a cost-effective high-performance integrated circuit for electrical bioimpedance (EBI) measurements in the frequency range from 1 kHz to 1 MHz. The resulting on-chip spectrometer provides high measuring EBI capabilities and together with a low-cost, commercially available radio frequency transceiver device. It provides reliable wireless communication, constitutes the basic node to build EBI wireless sensor networks (EBI-WSNs). The proposed EBI-WSN behaves as a high-performance wireless multi-channel EBI spectrometer, where the number of channels is completely scalable and independently configurable to satisfy specific measurement requirements of each individual. A prototype of the EBI node leads to a very small printed circuit board of approximately 8 cm2 including chip-antenna, which can operate several years on one 3-V coin cell battery and make it suitable for long-term preventive healthcare monitoring.

Statistical Analysis of Manning's roughness Coefficients in Non-vegetated Canals for Irrigation and Drainage Network of Moghan

Directory of Open Access Journals (Sweden)

Abolfazl Nasseri

2017-03-01

Full Text Available Introduction: Due to sensitiveness of flow to roughness coefficient (RC, selection of this coefficient is important in earth canals designing purposes. Precision selection of this coefficient is necessary for design and operation of earthen canals purposes. Overestimation of the actual amount of this coefficient will cause an underestimation for flow velocity. Accordingly, sedimentation in the earth canals will reduce canals’ capacitances. Adversely, underestimation of this coefficient will cause an overestimation for flow velocity and water flux in the earth canals. It will also increase the risk of soil erosion in the channels. This coefficient is expressed by Manning, Chezy and Darcy Weisbach equations. While, hydraulic engineers have selected Manning equation to estimate the flow rate in open channels due to ease of use and acceptable precision in the application of this equation. Water for crop production in Moghan, as one of the most important agricultural centers in Iran, is supplied from Moghan-Meel diversion dam via main canal of irrigation and drainage network with a capacity of 80 m3 s-1 with a length of 116 km. All of the branched 63-channel from the main channel are earthen. Continual sedimentation in the earth canals reduced the capacity of them and re-estimation the capacity of this canals needs to the precise quantities of variables such as roughness coefficient. Because the overestimation of the actual value of the coefficient would reduce the canals’ capacity and underestimation of the coefficient increase the risk of erosion in earth canals. The analysis of the correlation among variables, regression, analysis of statistical distribution of variables, analysis of variance of variables and the analysis of the events probabilities for stochastic variables can be made by statistical methods. Therefore, these methods were applied to analysis of roughness coefficient in the earth canals. Also, due to the importance of roughness

Network based multi-channel digital flash X-ray imaging system

International Nuclear Information System (INIS)

Wang Jingjin; Yuan Jie; Liu Yaqiang; Lin Yong; Song Zheng; Liu Keyin; Zhang Qi; Zheng Futang

2000-01-01

A network based multi-channel digital flash X-ray imaging system has been developed. It can be used to acquire and digitize orthogonal flash X-ray images in multi-interval, and to distribute the images on the network. There is no need of films and chemical process, no anxiety of waiting and no trouble of film archiving. This system is useful for testing ballistics, jet, explode, armour-piercing and fast running machines. The system composing and acquired images are presented. The software for object separating, mass calculating, 3D positioning, speed determining and cavity reconstruction are described

Network based multi-channel digital flash X-ray imaging system

International Nuclear Information System (INIS)

Wang Jingjin; Yuan Jie; Liu Yaqiang; Lin Yong; Song Zheng; Liu Keyin

2003-01-01

A network based multi-channel digital flash X-ray imaging system has been developed. It can be used to acquire and digitize orthogonal flash X-ray images in multi-interval, and to distribute the images on the network. There is no need of films and chemical process, no anxiety of waiting and no trouble of film archiving. This system is useful for testing ballistics, jet, explode, armour-piercing and fast running machines. The system composing and acquired images of terminal ballistics are presented. The software for object separating, profile calculating and 3D cavity reconstruction are described

Objective ARX Model Order Selection for Multi-Channel Human Operator Identification

NARCIS (Netherlands)

Roggenkämper, N; Pool, D.M.; Drop, F.M.; van Paassen, M.M.; Mulder, M.

2016-01-01

In manual control, the human operator primarily responds to visual inputs but may elect to make use of other available feedback paths such as physical motion, adopting a multi-channel control strategy. Hu- man operator identification procedures generally require a priori selection of the model

New ultra small battery operated portable multi-channel analyzer

International Nuclear Information System (INIS)

Wolf, M.A.; Umbarger, C.J.

1979-01-01

A newly designed portable multi-channel analyzer (MCA) has been developd at Los Alamos that has much improved physical and performance characteristics over previous designs. Namely, the instrument is very compact (25 cm wide x 14 cm deep x 21 cm high) and has a mass of 4.2 Kg (9.2 lb). The device has 1024 channels and is microprocessor controlled. The instrument has most of the standard features of present laboratory-based pulse height analyzers, including CRT display, region of interest integration, etc. Battery life of the MCA is nearly eight hours, with full charging over night. An accessory case carries a small audio cassette recorder for data storage. The case also contains two different NaI(Tl) detectors

Random matrix theory of multi-antenna communications: the Ricean channel

International Nuclear Information System (INIS)

Moustakas, Aris L; Simon, Steven H

2005-01-01

The use of multi-antenna arrays in wireless communications through disordered media promises huge increases in the information transmission rate. It is therefore important to analyse the information capacity of such systems in realistic situations of microwave transmission, where the statistics of the transmission amplitudes (channel) may be coloured. Here, we present an approach that provides analytic expressions for the statistics, i.e. the moments of the distribution, of the mutual information for general Gaussian channel statistics. The mathematical method applies tools developed originally in the context of coherent wave propagation in disordered media, such as random matrix theory and replicas. Although it is valid formally for large antenna numbers, this approach produces extremely accurate results even for arrays with as few as two antennas. We also develop a method to analytically optimize over the input signal distribution, which enables us to calculate analytic capacities when the transmitter has knowledge of the statistics of the channel. The emphasis of this paper is on elucidating the novel mathematical methods used. We do this by analysing a specific case when the channel matrix is a complex Gaussian with arbitrary mean and unit covariance, which is usually called the Ricean channel

Design and performance of a multi-channel, multi-sampling, PSD-enabling integrated circuit

Energy Technology Data Exchange (ETDEWEB)

Engel, G.L., E-mail: gengel@siue.ed [Department of Electrical and Computer Engineering, VLSI Design Research Laboratory, Southern Illinois University Edwardsville, Engineering Building, Room 3043 Edwardsville, IL 62026 1081 (United States); Hall, M.J.; Proctor, J.M. [Department of Electrical and Computer Engineering, VLSI Design Research Laboratory, Southern Illinois University Edwardsville, Engineering Building, Room 3043 Edwardsville, IL 62026 1081 (United States); Elson, J.M.; Sobotka, L.G.; Shane, R.; Charity, R.J. [Departments of Chemistry and Physics, Washington University, Saint Louis, MO 63130 (United States)

2009-12-21

This paper presents the design and test results of an eight-channel prototype integrated circuit chip intended to greatly simplify the pulse-processing electronics needed for large arrays of scintillation detectors. Because the chip design employs (user-controlled) multi-region charge integration, particle identification is incorporated into the basic design. Each channel on the chip also contains a time-to-voltage converter which provides relative time information. The pulse-height integrals and the relative time are all stored on capacitors and are either reset, after a user controlled time, or sequentially read out if acquisition of the event is desired. Each of the three pulse-height sub-channels consists of a gated integrator with eight programmable charging rates and an externally programmable gate generator that defines the start (with four time ranges) and width (with four time ranges) of the gate relative to an external discriminator signal. The chip supports three triggering modes, two time ranges, two power modes, and produces four sparsified analog pulse trains (three for the integrators and another for the time) with synchronized addresses for off-chip digitization with a pipelined ADC. The eight-channel prototype chip occupies an area of 2.8 mmx5.7 mm, dissipates 60 mW (low-power mode), and was fabricated in the AMI 0.5-mum process (C5N).

Design and performance of a multi-channel, multi-sampling, PSD-enabling integrated circuit

International Nuclear Information System (INIS)

Engel, G.L.; Hall, M.J.; Proctor, J.M.; Elson, J.M.; Sobotka, L.G.; Shane, R.; Charity, R.J.

2009-01-01

This paper presents the design and test results of an eight-channel prototype integrated circuit chip intended to greatly simplify the pulse-processing electronics needed for large arrays of scintillation detectors. Because the chip design employs (user-controlled) multi-region charge integration, particle identification is incorporated into the basic design. Each channel on the chip also contains a time-to-voltage converter which provides relative time information. The pulse-height integrals and the relative time are all stored on capacitors and are either reset, after a user controlled time, or sequentially read out if acquisition of the event is desired. Each of the three pulse-height sub-channels consists of a gated integrator with eight programmable charging rates and an externally programmable gate generator that defines the start (with four time ranges) and width (with four time ranges) of the gate relative to an external discriminator signal. The chip supports three triggering modes, two time ranges, two power modes, and produces four sparsified analog pulse trains (three for the integrators and another for the time) with synchronized addresses for off-chip digitization with a pipelined ADC. The eight-channel prototype chip occupies an area of 2.8 mmx5.7 mm, dissipates 60 mW (low-power mode), and was fabricated in the AMI 0.5-μm process (C5N).

A Suboptimal Scheme for Multi-User Scheduling in Gaussian Broadcast Channels

KAUST Repository

Zafar, Ammar; Alouini, Mohamed-Slim; Shaqfeh, Mohammad

2014-01-01

This work proposes a suboptimal multi-user scheduling scheme for Gaussian broadcast channels which improves upon the classical single user selection, while considerably reducing complexity as compared to the optimal superposition coding with successful interference cancellation. The proposed scheme combines the two users with the maximum weighted instantaneous rate using superposition coding. The instantaneous rate and power allocation are derived in closed-form, while the long term rate of each user is derived in integral form for all channel distributions. Numerical results are then provided to characterize the prospected gains of the proposed scheme.

A Suboptimal Scheme for Multi-User Scheduling in Gaussian Broadcast Channels

KAUST Repository

Zafar, Ammar

2014-05-28

This work proposes a suboptimal multi-user scheduling scheme for Gaussian broadcast channels which improves upon the classical single user selection, while considerably reducing complexity as compared to the optimal superposition coding with successful interference cancellation. The proposed scheme combines the two users with the maximum weighted instantaneous rate using superposition coding. The instantaneous rate and power allocation are derived in closed-form, while the long term rate of each user is derived in integral form for all channel distributions. Numerical results are then provided to characterize the prospected gains of the proposed scheme.

Design of multi-channel analyzer's monitoring system based on embedded system

International Nuclear Information System (INIS)

Yang Tao; Wei Yixiang

2007-01-01

A new Multi-Channel Analyzer's Monitoring system based on ARM9 Embedded system is introduced in this paper. Some solutions to problem are also discussed during the procedure of design, installation and debugging on Linux system. The Monitoring system is developed by using MiniGUI and Linux software system API, with the functions of collecting, displaying and I/O data controlling 1024 channels datum. They are all realized in real time, with the merits of low cost, small size and portability. All these lay the foundation of developing homemade Digital and Portable nuclear spectrometers. (authors)

Application of digital tomosynthesis to radiographic diagnosis of the temporal bone. Studies on visualization in normal subjects

International Nuclear Information System (INIS)

Kawai, Takashi

1995-01-01

To examine the usefulness of digital tomosynthesis for conducting radiographic diagnosis of the temporal bone, visualization of various aural structures such as the semicircular canals, cochlea, vestibular apparatus, ossicles of the ear and facial nerve canal was examined in 18 volunteers. The visualization of temporal bone specimens by digital tomosynthesis and CT images (slice thickness: 1.5 mm) was compared. The results showed that this system (Digital Tomosynthesis) produced clear images of bony labyrinthine structures such as the semicircular canals, cochlea, and vestibular apparatus. Visualization of the ossicles was also clear, and their continuity could be comprehended better than on CT images. This system also provided good visualization of the labyrinthine and tympanic parts of the facial nerve canal, although CT images had greater sharpness. Visualization of the lower half of the mastoid part was poor with this system. (author)

Study on a resource allocation scheme in multi-hop MIMO-OFDM systems over lognormal-rayleigh compound channels

Directory of Open Access Journals (Sweden)

LIU Jun

2015-10-01

Full Text Available For new generation wireless communication networks,this paper studies the optimization of the capacity and end-to-end throughput of the MIMO-OFDM based multi-hop relay systems.A water-filling power allocation method is proposed to improve the channel capacity and the throughput of the MIMO-OFDM system based multi-hop relay system in the Lognormal-Rayleigh shadowing compound channels.Simulations on the capacity and throughput show that the water-filling algorithm can improve the system throughput effectively in the MIMO-OFDM multi-hop relay system.

Scene text detection by leveraging multi-channel information and local context

Science.gov (United States)

Wang, Runmin; Qian, Shengyou; Yang, Jianfeng; Gao, Changxin

2018-03-01

As an important information carrier, texts play significant roles in many applications. However, text detection in unconstrained scenes is a challenging problem due to cluttered backgrounds, various appearances, uneven illumination, etc.. In this paper, an approach based on multi-channel information and local context is proposed to detect texts in natural scenes. According to character candidate detection plays a vital role in text detection system, Maximally Stable Extremal Regions(MSERs) and Graph-cut based method are integrated to obtain the character candidates by leveraging the multi-channel image information. A cascaded false positive elimination mechanism are constructed from the perspective of the character and the text line respectively. Since the local context information is very valuable for us, these information is utilized to retrieve the missing characters for boosting the text detection performance. Experimental results on two benchmark datasets, i.e., the ICDAR 2011 dataset and the ICDAR 2013 dataset, demonstrate that the proposed method have achieved the state-of-the-art performance.

The designing principle and implementation of multi-channel intelligence isotope thickness gauge based on multifunction card PCI-1710

International Nuclear Information System (INIS)

Zhang Bin; Zhao Shujun; Guo Maotian; He Jintian

2006-01-01

The designing principle, the constitution of system and the implementation of multi-channel intelligence isotope thickness gauge are introduced in the paper in detail, which are based on multifunction card PCI-1710. The paper also discusses the primaryprinciple of isotope thickness gauge, correct factor in measurement and complication of calibration. In the following, the whole frame of multi-channel intelligence isotope thickness gauge is given. The functions, the characteristics and the usage of multifunction card PCI-1710 are described. Furthermore, the developing process and the function modules of software are presented. Finally, the real prototype of multi-channel intelligence isotope thickness gauge is introduced, using 241 Am as a radioactive element. (authors)

Sediment control - an appropriate solution for small irrigation channels

International Nuclear Information System (INIS)

Shoag, M.A.

2002-01-01

Sediment control is one of the key factors considered prior to the design of an irrigation channel. When the channel takes off from its headworks, its slope is usually smaller than that of the parent stream to obtain required head. If the sediment load is heavy then the channel can not maintain equilibrium since the high influx can not be transported fully due to its small gradient. This results in the deposition of part incoming sediment in the channel itself. A typical irrigation intake suitable for small schemes, which consists of a simple settling basin with double orifice: one at the inlet from the river and the other at the outlet to the canal. The basin is provided with a side spill weir near its downstream end, to discharge flows in excess of the maximum canal capacity. This paper deals with the experimental study of such an arrangement. Different flows were run covering a range of levels in the river, from minimum to flood flows to check the hydraulic performance of the layout and in particular to study its effectiveness in settling sediment at low flows and avoiding excessive sediment input to the canal during flood. (author)

Multi-carrier Communications over Time-varying Acoustic Channels

Science.gov (United States)

Aval, Yashar M.

Acoustic communication is an enabling technology for many autonomous undersea systems, such as those used for ocean monitoring, offshore oil and gas industry, aquaculture, or port security. There are three main challenges in achieving reliable high-rate underwater communication: the bandwidth of acoustic channels is extremely limited, the propagation delays are long, and the Doppler distortions are more pronounced than those found in wireless radio channels. In this dissertation we focus on assessing the fundamental limitations of acoustic communication, and designing efficient signal processing methods that cam overcome these limitations. We address the fundamental question of acoustic channel capacity (achievable rate) for single-input-multi-output (SIMO) acoustic channels using a per-path Rician fading model, and focusing on two scenarios: narrowband channels where the channel statistics can be approximated as frequency- independent, and wideband channels where the nominal path loss is frequency-dependent. In each scenario, we compare several candidate power allocation techniques, and show that assigning uniform power across all frequencies for the first scenario, and assigning uniform power across a selected frequency-band for the second scenario, are the best practical choices in most cases, because the long propagation delay renders the feedback information outdated for power allocation based on the estimated channel response. We quantify our results using the channel information extracted form the 2010 Mobile Acoustic Communications Experiment (MACE'10). Next, we focus on achieving reliable high-rate communication over underwater acoustic channels. Specifically, we investigate orthogonal frequency division multiplexing (OFDM) as the state-of-the-art technique for dealing with frequency-selective multipath channels, and propose a class of methods that compensate for the time-variation of the underwater acoustic channel. These methods are based on multiple

Personalized multi-channel headphone sound reproduction based on active noise cancellation

NARCIS (Netherlands)

Schobben, D.W.E.; Aarts, R.M.

2005-01-01

A system for headphone signal processing is discussed which gives a listener the same impression as listening to a multi-channel loudspeaker set-up. It is important that this processing is optimized for each individual listener. If this is not the case, large localization errors may occur. In the

Hydrodynamic Modeling to Assess the Impact of Man-Made Fishing Canals on Floodplain Dynamics: A Case Study in the Logone Floodplain

Science.gov (United States)

Shastry, A. R.; Durand, M. T.; Fernandez, A.; Phang, S. C.; Hamilton, I.; Laborde, S.; Mark, B. G.; Moritz, M.; Neal, J. C.

2017-12-01

The Logone floodplain in northern Cameroon, also known as Yaayre, is an excellent example of coupled human-natural systems because of strong couplings between social, ecological and hydrologic systems. Overbank flow from the Logone River inundates the floodplain ( 8000 km2) annually and the flood is essential for fish populations and the fishers that depend on them for their livelihood. However, a recent trend of construction of fishing canals threatens to change flood dynamics like duration and timing of onset and may reduce fish productivity. Fishers dig canals during dry season, which are used to catch fish by collecting and channeling water during the flood recession. By connecting the floodplain to the river, these fishing canals act an extension of the river drainage network. The goal of this study is to characterize the relationship between the observed exponential increase in numbers of fishing canals and flood dynamics. We modelled the Logone floodplain as a two-dimensional hydrodynamic model with sub-grid parameterizations of channels using LISFLOOD-FP. We use a simplified version of the hydraulic system at a grid-cell size of 1-km, upscaled using a new high accuracy map of global terrain elevations from Shuttle Radar Topography Mission (SRTM). Using data from a field-collected survey performed in 2014, 1120 fishing canal were collated and parameterized as 111 sub-grid channels and the fishnet structure was represented as a combination of weir and mesh screens. 49 mapped floodplain depressions were also represented as sub-grid channels. In situ discharge observations available at Katoa between 2001 and 2007 were used as input for the model. Preliminary results show that presence of canals resulted in a 24% quicker recession of water in the natural depressions showing increasing canal numbers lead to quicker flood recession. We also investigate the rate of effect increasing number of fishing canals has on flood recession by simulating varying numbers of

Application of a multi-channel system for continuous monitoring and an early warning system.

Science.gov (United States)

Lee, J H; Song, C H; Kim, B C; Gu, M B

2006-01-01

A multi-channel continuous toxicity monitoring system developed in our laboratory, based on two-stage mini-bioreactors, was successfully implemented in the form of computer-based data acquisition. The multi-channel system consists of a series of a two-stage minibioreactor systems connected by a fiber optic probe to a luminometer, and uses genetically engineered bioluminescent bacteria for the detection of the potential toxicity from the soluble chemicals. This system can be stably and continuously operated due to the separation of the culture reactor from the test reactor and accomplish easy and long-term monitoring without system shut down by abrupt inflows of severe polluting chemicals. Four different recombinant bioluminescent bacteria were used in different channels so that the modes of the samples toxicities can be reasonably identified and evaluated based upon the response signature of each channel. The bioluminescent signatures were delivered from four channels by switching one at once, while the data is automatically logged to an IBM compatible computer. We also achieved the enhancement of the system through the manipulation of the dilution rate and the use of thermo-lux fusion strains. Finally, this system is now being implemented to a drinking water reservoir and river for remote sensing as an early warning system.

Multi-channel counter-current chromatography for high-throughput fractionation of natural products for drug discovery.

Science.gov (United States)

Wu, Shihua; Yang, Lu; Gao, Yuan; Liu, Xiaoyue; Liu, Feiyan

2008-02-08

A multi-channel counter-current chromatography (CCC) method has been designed and fabricated for the high-throughput fractionation of natural products without complications sometimes encountered with other conventional chromatographic systems, such as irreversible adsorptive constituent losses and deactivation, tailing of solute peaks and contamination. It has multiple independent CCC channels and each channel connects independent separation column(s) by parallel flow tubes, and thus the multi-channel CCC apparatus can achieve simultaneously two or more independent chromatographic processes. Furthermore, a high-throughput CCC fractionation method for natural products has been developed by a combination of a new three-channel CCC apparatus and conventional parallel chromatographic devices including pumps, sample injectors, effluent detectors and collectors, and its performance has been displayed on the fractionation of ethyl acetate extracts of three natural materials Solidago canadensis, Suillus placidus, and Trichosanthes kirilowii, which are found to be potent cytotoxic to tumor cell lines in the course of screening the antitumor candidates. By combination of biological screening programs and preparative high-performance liquid chromatography (HPLC) purification, 22.8 mg 6 beta-angeloyloxykolavenic acid and 29.4 mg 6 beta-tigloyloxykolavenic acid for S. canadensis, 25.3mg suillin for S. placidus, and 6.8 mg 23,24-dihydrocucurbitacin B for T. Kirilowii as their major cytotoxic principles were isolated from each 1000 mg crude ethyl acetate extract. Their chemical structures were characterized by electrospray ionization mass spectrometry, one- and two-dimensional nuclear magnetic resonance. The overall results indicate the multi-channel CCC is very useful for high-throughput fractionation of natural products for drug discovery in spite of the solvent balancing requirement and the lower resolution of the shorter CCC columns.

A 256-channel measuring and recording system; Un systeme de mesure et d'enregistrement a 256 canaux; Sistema izmerenij i registratsii na 256 kanalov; Sistema de medicion y registro de 256 canales

Energy Technology Data Exchange (ETDEWEB)

Krasheninnikov, I S; Kuronkin, S S; Pasechnikova, I P; Safonovi, O A; Tuchina, A S

1962-04-15

The paper discusses a system of measuring and recording units intended for use in a wide range of physical experiments. The basis of the system is a 256-channel register unit with a channel capacity of 2{sup 16} and a control unit. The system is executed on ferrite cores and transistors. The arithmetic element of the register unit makes it possible to perform adding and subtracting operations. The time of a complete cycle up t o the memory is 20 {mu}s. In the control unit, the basic controls, such as the settings for registering, counting and recording, can be combined in any order, which gives a much wider range of application as compared with normal equipment. The frequency of the control unit is taken from a 4-Mc/s quartz generator. As measuring units the system employs a pulse-amplitude-to-cipher code converter with a conversion time of 0.25 {mu}s per channel, integral non-linearity better than 0.1%, differential non-linearity less than 4%, zero drift less than 0.2 V and channel-width instability less than 0,4%, for lengthy periods. The converter system employs tubes. The time selector, which employs transistors, has a channel width from 1 to 64 {mu}s; the channel-width instability is less than 10{sup -4}. The logic of the circuit is such as to permit registration of incomplete pulses into the channel for channel widths of more than 8 {mu}s. The unit used to convert small time-intervals (10{sup -9} - 10{sup -7} s.) into a unitary cipher code has a time resolution of about 2 x 10{sup -5} s and a channel width stability better than 10{sup -2}. From the memory unit the information can be passed either in an analogue form to an oscillograph tube or in the form of cipher code to a printer and indicator lamps. (author) [French] Le memoire etudie un systeme de circuits de mesure et d'enregistrement, destine a des experiences de physique extremement variees. Le systeme comporte comme elements principaux un circuit enregistreur a 256 canaux, avec une capacite d

Joint image reconstruction method with correlative multi-channel prior for x-ray spectral computed tomography

DEFF Research Database (Denmark)

Kazantsev, Daniil; Jørgensen, Jakob Sauer; Andersen, Martin S

2018-01-01

peaks. The acquired energy-binned data, however, suffer from low signal-to-noise ratio, acquisition artifacts, and frequently angular undersampled conditions. New regularized iterative reconstruction methods have the potential to produce higher quality images and since energy channels are mutually...... to encourage joint smoothing directions. In particular, the method selects reference channels from which to propagate structure in an adaptive and stochastic way while preferring channels with a high data signal-to-noise ratio. The method is compared with current state-of-the-art multi-channel reconstruction...

On a multi-channel transportation loss system with controlled input and controlled service

Directory of Open Access Journals (Sweden)

Jewgeni Dshalalow

1987-01-01

Full Text Available A multi-channel loss queueing system is investigated. The input stream is a controlled point process. The service in each of m parallel channels depends on the state of the system at certain moments of time when input and service may be controlled. To obtain explicitly the limiting distribution of the main process (Zt (the number of busy channels in equilibrium, an auxiliary three dimensional process with two additional components (one of them is a semi-Markov process is treated as semi-regenerative process. An optimization problem is discussed. Simple expressions for an objective function are derived.

The suppression effect of a periodic surface with semicircular grooves on the high power microwave long pill-box window multipactor phenomenon

International Nuclear Information System (INIS)

Zhang, Xue; Wang, Yong; Fan, Junjie; Zhong, Yong; Zhang, Rui

2014-01-01

To improve the transmitting power in an S-band klystron, a long pill-box window that has a disk with grooves with a semicircular cross section is theoretically investigated and simulated. A Monte-Carlo algorithm is used to track the secondary electron trajectories and analyze the multipactor scenario in the long pill-box window and on the grooved surface. Extending the height of the long-box window can decrease the normal electric field on the surface of the window disk, but the single surface multipactor still exists. It is confirmed that the window disk with periodic semicircular grooves can explicitly suppress the multipactor and predominantly depresses the local field enhancement and the bottom continuous multipactor. The difference between semicircular and sharp boundary grooves is clarified numerically and analytically

The suppression effect of a periodic surface with semicircular grooves on the high power microwave long pill-box window multipactor phenomenon

Science.gov (United States)

Zhang, Xue; Wang, Yong; Fan, Junjie; Zhong, Yong; Zhang, Rui

2014-09-01

To improve the transmitting power in an S-band klystron, a long pill-box window that has a disk with grooves with a semicircular cross section is theoretically investigated and simulated. A Monte-Carlo algorithm is used to track the secondary electron trajectories and analyze the multipactor scenario in the long pill-box window and on the grooved surface. Extending the height of the long-box window can decrease the normal electric field on the surface of the window disk, but the single surface multipactor still exists. It is confirmed that the window disk with periodic semicircular grooves can explicitly suppress the multipactor and predominantly depresses the local field enhancement and the bottom continuous multipactor. The difference between semicircular and sharp boundary grooves is clarified numerically and analytically.

The suppression effect of a periodic surface with semicircular grooves on the high power microwave long pill-box window multipactor phenomenon

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xue, E-mail: zhangxue.iecas@yahoo.com; Wang, Yong; Fan, Junjie; Zhong, Yong; Zhang, Rui [Institute of Electronics, Chinese Academy of Sciences, Peking, 100190 China (China)

2014-09-15

To improve the transmitting power in an S-band klystron, a long pill-box window that has a disk with grooves with a semicircular cross section is theoretically investigated and simulated. A Monte-Carlo algorithm is used to track the secondary electron trajectories and analyze the multipactor scenario in the long pill-box window and on the grooved surface. Extending the height of the long-box window can decrease the normal electric field on the surface of the window disk, but the single surface multipactor still exists. It is confirmed that the window disk with periodic semicircular grooves can explicitly suppress the multipactor and predominantly depresses the local field enhancement and the bottom continuous multipactor. The difference between semicircular and sharp boundary grooves is clarified numerically and analytically.

Electro-optic tunable multi-channel filter in two-dimensional ferroelectric photonic crystals

International Nuclear Information System (INIS)

Fu, Yulan; Zhang, Jiaxiang; Hu, Xiaoyong; Gong, Qihuang

2010-01-01

An electro-optic tunable multi-channel filter is presented, which is based on a two-dimensional ferroelectric photonic crystal made of barium titanate. The filtering properties of the photonic crystal filter can be tuned by an applied voltage or by adjusting the structural parameters. The channel shifts about 30 nm under excitation of an applied voltage of 54.8 V. The influences of the structural disorders caused by the perturbations in the radius or the position of air holes on the filtering properties are also analyzed

Asymptotically exact solution of the multi-channel resonant-level model

International Nuclear Information System (INIS)

Zhang Guangming; Su Zhaobin; Yu Lu.

1994-01-01

An asymptotically exact partition function of the multi-channel resonant-level model is obtained through Tomonaga-Luttinger bosonization. A Fermi-liquid vs. non-Fermi-liquid transition, resulting from a competition between the Kondo and X-ray edge physics, is elucidated explicitly via the renormalization group theory. In the strong-coupling limit, the model is renormalized to the Toulouse limit. (author). 20 refs, 1 fig

The software for the USB-based multi-channel analyzer system

International Nuclear Information System (INIS)

Zhou Tong; Wei Yixiang

2002-01-01

A new type of multi-channel analyzer system is introduced, which takes advantage of Universal Serial Bus to communicate with computer and gets the merit of fast speed, universality and Plug and Play. The authors discussed the framework of the system, primary functions, display of spectrum date and the way of communication with hardware. The environment of the program is Visual Basic 6.0

River restoration strategies in channelized, low-gradient landscapes of West Tennessee, USA

Science.gov (United States)

Smith, D.P.; Diehl, T.H.; Turrini-Smith, L. A.; Maas-Baldwin, J.; Croyle, Z.

2009-01-01

West Tennessee has a complex history of watershed disturbance, including agricultural erosion, channelization, accelerated valley sedimentation, and the removal and reestablishment of beaver. Watershed management has evolved from fl oodplain drainage via pervasive channelization to include local drainage canal maintenance and local river restoration. Many unmaintained canals are undergoing excessive aggradation and complex channel evolution driven by upland erosion and low valley gradient. The locus of aggradation in fully occluded canals (valley plugs) moves up-valley as sediment continues to accumulate in the backwater behind the plug. Valley plugs that cause canal avulsion can lead to redevelopment of meandering channels in less disturbed areas of the fl oodplain, in a process of passive self-restoration. Some valley plugs have brought restored fl oodplain function, reoccupation of extant historic river channels, and formation of a "sediment shadow" that protects downstream reaches from excess sedimentation. Despite the presence of numerous opportunities, there is presently no mechanism for including valley plugs in mitigation projects. In 1997 a survey of 14 reference reach cross sections documented relations between drainage area and bankfull geometry of relatively unmodified streams in West Tennessee. Reassessment of seven of those sites in 2007 showed that one had been dammed by beaver and that two sites could not be analyzed further because of signifi cant vertical or lateral instability. In contrast to other regions of North America, the results suggest that stream channels in this region fl ood more frequently than once each year, and can remain out of banks for several weeks each year. ?? 2009 Geological Society of America.

Automatic extraction and processing of small RNAs on a multi-well/multi-channel (M&M) chip.

Science.gov (United States)

Zhong, Runtao; Flack, Kenneth; Zhong, Wenwan

2012-12-07

The study of the regulatory roles in small RNAs can be accelerated by techniques that permit simple, low-cost, and rapid extraction of small RNAs from a small number of cells. In order to ensure highly specific and sensitive detection, the extracted RNAs should be free of the background nucleic acids and present stably in a small volume. To meet these criteria, we designed a multi-well/multi-channel (M&M) chip to carry out automatic and selective isolation of small RNAs via solid-phase extraction (SPE), followed by reverse-transcription (RT) to convert them to the more stable cDNAs in a final volume of 2 μL. Droplets containing buffers for RNA binding, washing, and elution were trapped in microwells, which were connected by one channel, and suspended in mineral oil. The silica magnetic particles (SMPs) for SPE were moved along the channel from well to well, i.e. in between droplets, by a fixed magnet and a translation stage, allowing the nucleic acid fragments to bind to the SMPs, be washed, and then be eluted for RT reaction within 15 minutes. RNAs shorter than 63 nt were selectively enriched from cell lysates, with recovery comparable to that of a commercial kit. Physical separation of the droplets on our M&M chip allowed the usage of multiple channels for parallel processing of multiple samples. It also permitted smooth integration with on-chip RT-PCR, which simultaneously detected the target microRNA, mir-191, expressed in fewer than 10 cancer cells. Our results have demonstrated that the M&M chip device is a valuable and cost-saving platform for studying small RNA expression patterns in a limited number of cells with reasonable sample throughput.

Multi-Instrument Investigation of Ionospheric Flow Channels and Their Impact on the Ionosphere and Thermosphere during Geomagnetic Storms

Science.gov (United States)

2017-12-29

AFRL-AFOSR-JP-TR-2018-0009 Multi-instrument investigation of ionospheric flow channels and their impact on the ionosphere and thermosphere during...SUBTITLE Multi-instrument investigation of ionospheric flow channels and their impact on the ionosphere and thermosphere during geomagnetic storms 5a...Experiment) and GOCE (Gravity field and steady- state Ocean Circulation Explorer) satellite data. We also created a series of computer algorithms to

Lipoatrofia semicircular: un nuevo trastorno de salud relacionado con el trabajo Semicircular lipoatrophy: a new occupational disease

Directory of Open Access Journals (Sweden)

Helena Pañella

2008-02-01

Full Text Available En febrero de 2007, una gran empresa de Barcelona notificó un brote de una rara lesión llamada lipoatrofia semicircular que afectaba a casi 200 personas de los aproximadamente 1.000 trabajadores de plantilla. En septiembre de ese mismo año se habían notificado más de 600 casos, también en otros centros de trabajo, sobre todo de Barcelona pero también del resto de España. Se realizó un estudio de casos y controles que identificó como factores de riesgo de esta lesión la baja humedad relativa del interior de los edificios y la utilización de mesas de trabajo con bordes delgados y angulares. Cuatro meses después de notificarse los primeros casos, se presentó un protocolo de actuación ante casos de lipoatrofia dirigido a los profesionales sanitarios de los servicios de prevención de las empresas y de las mutuas de accidentes de trabajo y de enfermedades profesionales. La implantación de estas medidas de control se ha traducido en una drástica reducción de la incidencia y en la curación de una proporción significativa de los casos.In February 2007, an outbreak of 200 cases of a rare condition called semicircular lipoatrophy was notified by a company of Barcelona with about 1,000 workers. In September of that year, more that 600 cases had been notified in other workplaces, most of them in Barcelona, but also in other Spanish cities. A case-control study identified the low indoor relative humidity and working tables with thin edges as risk factors. Four months after the onset of the outbreak, the guidelines for the management of similar work-related outbreaks were published. They were addressed to health care workers of occupational health services and insurance organisations of occupational injuries and professional diseases. The implementation of the recommended interventions has been followed by a dramatic reduction of the incidence of new cases as well as by the recovery of a significant proportion of cases.

A multi-channel data acquisition system with high resolution based on microcomputer

International Nuclear Information System (INIS)

An Qi; Wang Yanfang; Xing Tao

1995-01-01

The paper introduces the principle of a multi-channel data acquisition system with high resolution based on the microcomputer.The system consists of five parts.They are analog-to-digital converter, data buffer area, trigger logic circuit, control circuit, and digital-to-analog converter

Irrigation and crop management in Gandak Canal command of India

International Nuclear Information System (INIS)

Singh, S.S.; Khan, A.R.

2002-05-01

The Gandak Project is one of the biggest irrigation projects in India, covering a culturable command area (CCA) of 4.44 lakh ha in U.P., 9.6 lakh ha CCA in Bihar and 0.44 lakh ha in Nepal (Singh and Khan, 2002). The total culturable command areas are 14.44 lakh hectares. The command area is located in between latitude 25 deg 40' to 27 deg 25' and longitude between 83 deg 15' to 85 deg 15'. It is a diversion project through construction of a barrage on the river Gandak. This project area covers up to five districts in the Command of Tirhut Main Canal (TMC) and 3 districts in the Saran Main Canal (SMC) command. The length of main canal is usually long (990 and 650 R.D.'s in eastern and western side, respectively) and the channels are unlined and seepage loss is quite high. (author)

Effect of Canal Bank Filtration on Quality of Water Long Hyderabad City

Directory of Open Access Journals (Sweden)

IMDAD ALI KANDHAR

2016-07-01

Full Text Available The focus of the present study was to examine the effect of canal bank filtration on the quality of water and the geological settings along the banks of canals at the shallow depth aquifers. The four Model wells were drilled at different locations of the Line channel, Pinyari and phulali canals in the study area. The samples of soil were collected throughout drilling of the model wells for the analysis of grain size distribution .In addition to this, canal water and model well water samples were collected and analyzed for the water quality characteristics during winter and summer seasons. The analysis of soil and water samples reveals that the ground water is influenced by the grain size distribution, hydraulic conductivity and the location of the model Wells. The model well that has higher percentage of 0.075 mm of grain size distribution(hydraulic conductivity between 10-25 ft/day was more suitable for the filtration of the canal water through its banks, followed by 0.15 mm of grain size distribution (hydraulic conductivity > 25ft/ day. Moreover, the present study also shows that the canal water filtration is suitable in terms of total alkalinity, nitrate-nitrogen, total iron and pH to get the potable water at the location near upstream of the canal, especially in the summer season.

Compact and cost-effective multi-channel optical spectrometer for fine FBG sensing in IoT technology

Science.gov (United States)

Konishi, Tsuyoshi; Yamasaki, Yu

2018-02-01

Optical fiber sensor networks have attracted much attention in IoT technology and a fiber Bragg grating is one of key sensor devices there because of their advantages in a high affinity for optical fiber networks, compactness, immunity to electromagnetic interference and so on. Nevertheless, its sensitivity is not always satisfactory so as to be usable together with widespread cost-effective multi-channel spectrometers. In this paper, we introduce a new cost-effective approach for a portable multi-channel spectrometer with high spectral resolution and demonstrates some preliminary experimental results for fine FBG sensing.

Decision-making in irrigation networks: Selecting appropriate canal structures using multi-attribute decision analysis.

Science.gov (United States)

Hosseinzade, Zeinab; Pagsuyoin, Sheree A; Ponnambalam, Kumaraswamy; Monem, Mohammad J

2017-12-01

The stiff competition for water between agriculture and non-agricultural production sectors makes it necessary to have effective management of irrigation networks in farms. However, the process of selecting flow control structures in irrigation networks is highly complex and involves different levels of decision makers. In this paper, we apply multi-attribute decision making (MADM) methodology to develop a decision analysis (DA) framework for evaluating, ranking and selecting check and intake structures for irrigation canals. The DA framework consists of identifying relevant attributes for canal structures, developing a robust scoring system for alternatives, identifying a procedure for data quality control, and identifying a MADM model for the decision analysis. An application is illustrated through an analysis for automation purposes of the Qazvin irrigation network, one of the oldest and most complex irrigation networks in Iran. A survey questionnaire designed based on the decision framework was distributed to experts, managers, and operators of the Qazvin network and to experts from the Ministry of Power in Iran. Five check structures and four intake structures were evaluated. A decision matrix was generated from the average scores collected from the survey, and was subsequently solved using TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) method. To identify the most critical structure attributes for the selection process, optimal attribute weights were calculated using Entropy method. For check structures, results show that the duckbill weir is the preferred structure while the pivot weir is the least preferred. Use of the duckbill weir can potentially address the problem with existing Amil gates where manual intervention is required to regulate water levels during periods of flow extremes. For intake structures, the Neyrpic® gate and constant head orifice are the most and least preferred alternatives, respectively. Some advantages

Stability of guest molecules in urea canal complexes by canal polymerization

International Nuclear Information System (INIS)

Yoshii, Fumio; Makuuchi, Keizo

1995-01-01

It was found that various organic materials are attracted into urea canal by hexanediol diacrylate (HDDA) and long chain compounds. This means that materials which does not form complex by itself are induced in canal by HDDA and long chain compounds. To include with stability perfumes, insecticides, attractants and repellents in urea canal, leaf alcohol was used as a model compound for guest molecules in the canal. The leaf alcohol from the canal released gradually over many days and the release was inhibited for 15 days by long chain compounds and for 30 days by polymerized HDDA after irradiation. After releasing, the leaf alcohol in the canal remained 25 % stable for long chain compounds and 40 % for polymerized HDDA. The dose required for stabilization of leaf alcohol in the urea canal by canal polymerization of HDDA was 30 kGy. (author)

Salt Plug Formation Caused by Decreased River Discharge in a Multi-channel Estuary

OpenAIRE

Shaha, Dinesh Chandra; Cho, Yang-Ki

2016-01-01

Freshwater input to estuaries may be greatly altered by the river barrages required to meet human needs for drinking water and irrigation and prevent salt water intrusion. Prior studies have examined the salt plugs associated with evaporation and salt outwelling from tidal salt flats in single-channel estuaries. In this work, we discovered a new type of salt plug formation in the multi-channel Pasur River Estuary (PRE) caused by decreasing river discharges resulting from an upstream barrage. ...

On the relationship between multi-channel envelope and temporal fine structure

DEFF Research Database (Denmark)

Søndergaard, Peter Lempel; Decorsiere, Remi Julien Blaise; Dau, Torsten

2011-01-01

The envelope of a signal is broadly defined as the slow changes in time of the signal, where as the temporal fine structure (TFS) are the fast changes in time, i.e. the carrier wave(s) of the signal. The focus of this paper is on envelope and TFS in multi-channel systems. We discuss the differenc...

Exploiting the opportunities of Internet and multi-channel pricing : An exploratory research

NARCIS (Netherlands)

Sotgiu, Francesca; Ancarani, Fabio

2004-01-01

Smart firms are not worried about the impact of the Internet on pricing, but realise that they have the unique opportunity to exploit new options and improve their marketing performance. Multi-channel pricing is one of the most interesting opportunities firms can exploit in the digital economy.

Root canal irrigants

OpenAIRE

Kandaswamy, Deivanayagam; Venkateshbabu, Nagendrababu

2010-01-01

Successful root canal therapy relies on the combination of proper instrumentation, irrigation, and obturation of the root canal. Of these three essential steps of root canal therapy, irrigation of the root canal is the most important determinant in the healing of the periapical tissues. The primary endodontic treatment goal must thus be to optimize root canal disinfection and to prevent reinfection. In this review of the literature, various irrigants and the interactions between irrigants are...

The development of 128 ch fast multi channel pulse height analyzer for a tokamak plasmas

International Nuclear Information System (INIS)

Kawashima, Hisato; Matoba, Tohru; Ogawa, Toshihide; Kawakami, Tomohide

1985-02-01

A high counting rate multi channel pulse height analyzer was developed and tested to measure the detailed time evolution of X-ray energy spectrun radiated from a tokamak plasmas. Main developing objects of this analyzer are as follows. 1. The maximum counting rate and the minimum time resolution are 4 Mcps and 10 ms, respectively. 2. The energy resolution has ability to distinguish the characterisitic X-ray line. 3. Computer has to be used for operating system. This fast multi channel analyzer is using to measure the Soft X-ray spectrum on JFT-2M tokamak, and is confirmed to be useful for a practical measuring system. (author)

Multi codes and multi-scale analysis for void fraction prediction in hot channel for VVER-1000/V392

International Nuclear Information System (INIS)

Hoang Minh Giang; Hoang Tan Hung; Nguyen Huu Tiep

2015-01-01

Recently, an approach of multi codes and multi-scale analysis is widely applied to study core thermal hydraulic behavior such as void fraction prediction. Better results are achieved by using multi codes or coupling codes such as PARCS and RELAP5. The advantage of multi-scale analysis is zooming of the interested part in the simulated domain for detail investigation. Therefore, in this study, the multi codes between MCNP5, RELAP5, CTF and also the multi-scale analysis based RELAP5 and CTF are applied to investigate void fraction in hot channel of VVER-1000/V392 reactor. Since VVER-1000/V392 reactor is a typical advanced reactor that can be considered as the base to develop later VVER-1200 reactor, then understanding core behavior in transient conditions is necessary in order to investigate VVER technology. It is shown that the item of near wall boiling, Γ w in RELAP5 proposed by Lahey mechanistic method may not give enough accuracy of void fraction prediction as smaller scale code as CTF. (author)

Optimization of multi-channel neutron focusing guides for extreme sample environments

International Nuclear Information System (INIS)

Di Julio, D D; Lelièvre-Berna, E; Andersen, K H; Bentley, P M; Courtois, P

2014-01-01

In this work, we present and discuss simulation results for the design of multichannel neutron focusing guides for extreme sample environments. A single focusing guide consists of any number of supermirror-coated curved outer channels surrounding a central channel. Furthermore, a guide is separated into two sections in order to allow for extension into a sample environment. The performance of a guide is evaluated through a Monte-Carlo ray tracing simulation which is further coupled to an optimization algorithm in order to find the best possible guide for a given situation. A number of population-based algorithms have been investigated for this purpose. These include particle-swarm optimization, artificial bee colony, and differential evolution. The performance of each algorithm and preliminary results of the design of a multi-channel neutron focusing guide using these methods are described. We found that a three-channel focusing guide offered the best performance, with a gain factor of 2.4 compared to no focusing guide, for the design scenario investigated in this work.

Design, Development and Testing of a Semicircular Type Capacitive Angular Position Sensor

Directory of Open Access Journals (Sweden)

Nikhil GAURAV

2011-06-01

Full Text Available A low cost semicircular type capacitive angular position sensor has been designed, developed and tested. It is made of two semicircular parallel plates where one plate is fixed and another plate is connected with the rotor whose angular position is to be measured. When the angular position of the rotor changes with respect to the fixed plate, the overlapping area between the two plates of the capacitor is varied causing a change in capacitance value. Capacitance variation obtained due to the change in angular position is in the nano farad range. For signal conditioning, series R-L-C resonating circuit instead of conventional bridge circuit has been used to convert the sensor capacitance variation in to voltage. Experimental result shows that the capacitance for change in angular position 0º-180º increases linearly and for 180º-360º it decreases linearly. To get a linearly increasing response of same slope for the full scale of 0º-360º, a suitable linearising circuit has been designed, developed and tested. Sensor output along with the signal conditioning shows good linearity and repeatability.

Development of multi-channel high power rectangular RF window for LHCD system employing high temperature vacuum brazing technique

International Nuclear Information System (INIS)

Sharma, P K; Ambulkar, K K; Parmar, P R; Virani, C G; Thakur, A L; Joshi, L M; Nangru, S C

2010-01-01

A 3.7 GHz., 120 kW (pulsed), lower hybrid current drive (LHCD) system is employed to drive non-inductive plasma current in ADITYA tokamak. The rf power is coupled to the plasma through grill antenna and is placed in vacuum environment. A vacuum break between the pressurized transmission line and the grill antenna is achieved with the help of a multi (eight) channel rectangular RF vacuum window. The phasing between adjacent channels of 8-channel window (arranged in two rows) is important for launching lower hybrid waves and each channel should have independent vacuum window so that phase information is retained. The geometrical parameter of the grill antenna, like periodicity (9mm), channel dimensions (cross sectional dimension of 76mm x 7mm), etc. is to be maintained. These design constraint demanded a development of a multi channel rectangular RF vacuum window. To handle rf losses and thermal effects, high temperature vacuum brazing techniques is desired. Based on the above requirements we have successfully developed a multi channel rectangular rf vacuum window employing high temperature vacuum brazing technique. During the development process we could optimize the chemical processing parameters, brazing process parameters, jigs and fixtures for high temperature brazing and leak testing, etc. Finally the window is tested for low power rf performance using VNA. In this paper we would present the development of the said window in detail along with its mechanical, vacuum and rf performances.

Development of multi-channel high power rectangular RF window for LHCD system employing high temperature vacuum brazing technique

Energy Technology Data Exchange (ETDEWEB)

Sharma, P K; Ambulkar, K K; Parmar, P R; Virani, C G; Thakur, A L [Institute for Plasma Research, Bhat, Gandhinagar 382428 (India); Joshi, L M; Nangru, S C, E-mail: pramod@ipr.res.i [Central Electronics Engineering Research Institute, Pilani, Rajasthan 333 031 (India)

2010-02-01

A 3.7 GHz., 120 kW (pulsed), lower hybrid current drive (LHCD) system is employed to drive non-inductive plasma current in ADITYA tokamak. The rf power is coupled to the plasma through grill antenna and is placed in vacuum environment. A vacuum break between the pressurized transmission line and the grill antenna is achieved with the help of a multi (eight) channel rectangular RF vacuum window. The phasing between adjacent channels of 8-channel window (arranged in two rows) is important for launching lower hybrid waves and each channel should have independent vacuum window so that phase information is retained. The geometrical parameter of the grill antenna, like periodicity (9mm), channel dimensions (cross sectional dimension of 76mm x 7mm), etc. is to be maintained. These design constraint demanded a development of a multi channel rectangular RF vacuum window. To handle rf losses and thermal effects, high temperature vacuum brazing techniques is desired. Based on the above requirements we have successfully developed a multi channel rectangular rf vacuum window employing high temperature vacuum brazing technique. During the development process we could optimize the chemical processing parameters, brazing process parameters, jigs and fixtures for high temperature brazing and leak testing, etc. Finally the window is tested for low power rf performance using VNA. In this paper we would present the development of the said window in detail along with its mechanical, vacuum and rf performances.

Vestibular neuritis: three-dimensional videonystagmography and vestibular evoked myogenic potential results.

Science.gov (United States)

Chen, C W; Young, Y H; Wu, C H

2000-10-01

Eight patients diagnosed with vestibular neuritis received the newly developed three-dimensional videonystagmography (3D VNG) and vestibular evoked myogenic potential (VEMP) examination in order to localize the lesion site. Two (25%) of the 8 patients exhibited spontaneous nystagmus with 3 components, indicating that both the horizontal semicircular canal (HSCC) and anterior semicircular canal (ASCC) were affected. The remaining 6 patients (75%) displayed only horizontal nystagmus, meaning that only the HSCC was involved. Seven (88%) of the 8 patients had bilateral normal VEMPs, revealing sparing of the posterior semicircular canal (PSCC). In a comparative study, another seven patients with vestibular neuritis 1 year post-treatment also received the caloric test, 3D VNG and VEMP examination. Only one patient exhibited spontaneous nystagmus. An absent caloric response of the lesioned side persisted in 5 (71%) of the 7 patients. However, all patients showed normal VEMPs bilaterally. 3D VNG and VEMP examination indicates that vestibular neuritis mainly affects the superior division of the vestibular nerve, which innervates the HSCC and ASCC. Meanwhile, the function of the PSCC and saccule, innervated by the inferior vestibular nerve, is preserved.

The design of multi-channel pulse amplitude analyzer based on ARM micro controller

International Nuclear Information System (INIS)

Li Hai; Li Xiang; Liu Caixue

2010-01-01

It introduces the design of multi-channel pulse amplitude analyzer based on embedded ARM micro-controller. The embedded and real-time system μC/OS-II builds up the real-time and stability of the system and advances the integration. (authors)

Pilot-Assisted Channel Estimation for Orthogonal Multi-Carrier DS-CDMA with Frequency-Domain Equalization

Science.gov (United States)

Shima, Tomoyuki; Tomeba, Hiromichi; Adachi, Fumiyuki

Orthogonal multi-carrier direct sequence code division multiple access (orthogonal MC DS-CDMA) is a combination of time-domain spreading and orthogonal frequency division multiplexing (OFDM). In orthogonal MC DS-CDMA, the frequency diversity gain can be obtained by applying frequency-domain equalization (FDE) based on minimum mean square error (MMSE) criterion to a block of OFDM symbols and can improve the bit error rate (BER) performance in a severe frequency-selective fading channel. FDE requires an accurate estimate of the channel gain. The channel gain can be estimated by removing the pilot modulation in the frequency domain. In this paper, we propose a pilot-assisted channel estimation suitable for orthogonal MC DS-CDMA with FDE and evaluate, by computer simulation, the BER performance in a frequency-selective Rayleigh fading channel.

Miniaturized multi channel infrared optical gas sensor system

Science.gov (United States)

Wöllenstein, Jürgen; Eberhardt, Andre; Rademacher, Sven; Schmitt, Katrin

2011-06-01

Infrared spectroscopy uses the characteristic absorption of the molecules in the mid infrared and allows the determination of the gases and their concentration. Especially by the absorption at longer wavelengths between 8 μm and 12 μm, the so called "fingerprint" region, the molecules can be measured with highest selectivity. We present an infrared optical filter photometer for the analytical determination of trace gases in the air. The challenge in developing the filter photometer was the construction of a multi-channel system using a novel filter wheel concept - which acts as a chopper too- in order to measure simultaneously four gases: carbon monoxide, carbon dioxide, methane and ammonia. The system consists of a broadband infrared emitter, a long path cell with 1.7m optical path length, a filter wheel and analogue and digital signal processing. Multi channel filter photometers normally need one filter and one detector per target gas. There are small detection units with one, two or more detectors with integrated filters available on the market. One filter is normally used as reference at a wavelength without any cross-sensitivities to possible interfering gases (e.g. at 3.95 μm is an "atmospheric window" - a small spectral band without absorbing gases in the atmosphere). The advantage of a filter-wheel set-up is that a single IR-detector can be used, which reduces the signal drift enormously. Pyroelectric and thermopile detectors are often integrated in these kinds of spectrometers. For both detector types a modulation of the light is required and can be done - without an additional chopper - with the filter wheel.

Stochastic geometry model for multi-channel fog radio access networks

KAUST Repository

Emara, Mostafa

2017-06-29

Cache-enabled base station (BS) densification, denoted as a fog radio access network (F-RAN), is foreseen as a key component of 5G cellular networks. F-RAN enables storing popular files at the network edge (i.e., BS caches), which empowers local communication and alleviates traffic congestions at the core/backhaul network. The hitting probability, which is the probability of successfully transmitting popular files request from the network edge, is a fundamental key performance indicator (KPI) for F-RAN. This paper develops a scheduling aware mathematical framework, based on stochastic geometry, to characterize the hitting probability of F-RAN in a multi-channel environment. To this end, we assess and compare the performance of two caching distribution schemes, namely, uniform caching and Zipf caching. The numerical results show that the commonly used single channel environment leads to pessimistic assessment for the hitting probability of F-RAN. Furthermore, the numerical results manifest the superiority of the Zipf caching scheme and quantify the hitting probability gains in terms of the number of channels and cache size.

Superpixel-based segmentation of muscle fibers in multi-channel microscopy.

Science.gov (United States)

Nguyen, Binh P; Heemskerk, Hans; So, Peter T C; Tucker-Kellogg, Lisa

2016-12-05

Confetti fluorescence and other multi-color genetic labelling strategies are useful for observing stem cell regeneration and for other problems of cell lineage tracing. One difficulty of such strategies is segmenting the cell boundaries, which is a very different problem from segmenting color images from the real world. This paper addresses the difficulties and presents a superpixel-based framework for segmentation of regenerated muscle fibers in mice. We propose to integrate an edge detector into a superpixel algorithm and customize the method for multi-channel images. The enhanced superpixel method outperforms the original and another advanced superpixel algorithm in terms of both boundary recall and under-segmentation error. Our framework was applied to cross-section and lateral section images of regenerated muscle fibers from confetti-fluorescent mice. Compared with "ground-truth" segmentations, our framework yielded median Dice similarity coefficients of 0.92 and higher. Our segmentation framework is flexible and provides very good segmentations of multi-color muscle fibers. We anticipate our methods will be useful for segmenting a variety of tissues in confetti fluorecent mice and in mice with similar multi-color labels.

Applying a CPLD for Refurbishment of a Multi-channel Pulse Height Analyzer

International Nuclear Information System (INIS)

Leetragunpichitchai, Supalerk; Thong-Aram, Decho; Ploykrachang, Kamontip

2007-08-01

Full text: This research applied a CPLD for construction of a 100 MHz, 2048 channel, Wilkinson type analog to digital converter (ADC) circuits for refurbishment of an original multi-channel pulse height analyzer (PHA) ADC. Introduction of the CPLD could reduce the complexity of the circuits, equipment size and also the power consumption while the operation speed was increased. The linearity test of the ADC was found to be excellent with an R2 = 0.9995 and a maximum pulse rate of 48.828 k cps could be converted in this system. Therefore the developed system was appropriate for replacing the original ADC

Automated Filtering of Common Mode Artifacts in Multi-Channel Physiological Recordings

Science.gov (United States)

Kelly, John W.; Siewiorek, Daniel P.; Smailagic, Asim; Wang, Wei

2014-01-01

The removal of spatially correlated noise is an important step in processing multi-channel recordings. Here, a technique termed the adaptive common average reference (ACAR) is presented as an effective and simple method for removing this noise. The ACAR is based on a combination of the well-known common average reference (CAR) and an adaptive noise canceling (ANC) filter. In a convergent process, the CAR provides a reference to an ANC filter, which in turn provides feedback to enhance the CAR. This method was effective on both simulated and real data, outperforming the standard CAR when the amplitude or polarity of the noise changes across channels. In many cases the ACAR even outperformed independent component analysis (ICA). On 16 channels of simulated data the ACAR was able to attenuate up to approximately 290 dB of noise and could improve signal quality if the original SNR was as high as 5 dB. With an original SNR of 0 dB, the ACAR improved signal quality with only two data channels and performance improved as the number of channels increased. It also performed well under many different conditions for the structure of the noise and signals. Analysis of contaminated electrocorticographic (ECoG) recordings further showed the effectiveness of the ACAR. PMID:23708770

Study of multi-channel readout ASIC and its discrete module for particle detector

International Nuclear Information System (INIS)

Wang Ke; Fan Lei; Zhang Shengjun; Li Xian

2013-01-01

Recently, kinds of particle detectors have used Application Specific Integrated Circuits (ASIC) in their electronics readout systems, it is the key part for the whole system. This project designed a multi-channel readout ASIC for general detectors. The chip has Preamplifier, Shaper and Peak Detector embedded for easy readout. For each channel, signal which is preprocessed by a low-noise preamplifier is sent to the shaper to form a quasi-Gaussian pulse and keep its peak for readout. This chip and modules of individual Preamplifier, Shaper and Peak Detector have been manufactured and tested. The discrete modules work well, and the 6-channel chip NPRE 6 is ready for test in some particle detection system. (authors)

Experimental test results of multi-channel test rig of T1 test section, 5

International Nuclear Information System (INIS)

Hino, Ryutaro; Takase, Kazuyuki; Miyamoto, Yoshiaki

1990-09-01

Channel blockage test on a fuel column of the high temperature engineering test reactor (HTTR) has been performed under the helium gas atmosphere at a high temperature and a high pressure in order to obtain safety data on flow rate and temperature distributions in the fuel column with the multi-channel test rig of the fuel stack test section (T 1 ) in HENDEL. In the test, one of 12 fuel channels was blockaded to 90% of flow area at the channel inlet. Experimental results showed that the helium gas flow rate in the blockaded channel was 28%∼33% lower than the average flow rate for Reynolds number from 2300 to 14000 in isothermal flow. When simulated fuel rods were heated, the flow rate in the blockaded channel did not decrease down in comparison with the isothermal flow. This is due to that the heat generated in the fuel rods conducts to the other fuel channels in graphite fuel blocks, so that accelerated pressure losses in the fuel channels change with helium gas temperatures. (author)

Assessment of Marginal Adaptation and Sealing Ability of Root Canal Sealers: An in vitro Study.

Science.gov (United States)

Remy, Vimal; Krishnan, Vineesh; Job, Tisson V; Ravisankar, Madhavankutty S; Raj, C V Renjith; John, Seena

2017-12-01

This study aims to compare the marginal adaptation and sealing ability [mineral trioxide aggregate (MTA)-Fillapex, AH Plus, Endofill sealers] of root canal sealers. In the present study, the inclusion criteria include 45 single-rooted extracted mandibular premolar teeth, with single canal and complete root formation. The sectioning of the samples was done at the cementoenamel junction using a low-speed diamond disc. Step-back technique was used to prepare root canals manually. The MTA-Fillapex, AH Plus, and Endofill sealers were the three experimental sealer groups to which 45 teeth were distributed. Under scanning electron microscope (SEM), marginal gap at sealer and root dentin interface were examined at coronal and apical halves of root canal. Among the three maximum marginal adaptations were seen with AH Plus sealer (4.10 ± 0.10) which is followed by Endofill sealer (1.44 ± 0.18) and MTA-Fillapex sealer (0.80 ± 0.22). Between the coronal and apical marginal adaptation, significant statistical difference (p = 0.001) was seen in AH Plus sealer. When a Mann-Whitney U-test was done on MTA-Fillapex sealer vs AH Plus sealer and AH Plus sealer vs Endofill sealer, there was a statistically significant difference (p marginal adaptation when compared with other sealers used. For sealing space of crown wall and main cone in root canal treatment, sealers play an important role. The other advantages of sealers are that they are used to fill voids and irregularities in root channel, secondary, lateral channels, and space between applied gutta-percha cones and also act as tripper during filling.

FPGA based high-performance multi-channel analyzer with local histogram memory

International Nuclear Information System (INIS)

Kulkarni, C.P.; Vaidya, P.P.; Paulson, M.

2004-01-01

Modern nuclear spectroscopy systems demand for a Multi-Channel Analyzer (MCA) with higher resolution, faster speed and other advanced features. The MCA described here is targeted for such demanding applications. The MCA has an in-built local histogram memory and a memory management unit integrated in an FPGA (Field Programmable Gate Array) chip. In addition to the integrated low power digital circuitry, the system utilizes state of the art advanced analog circuits like low power, high speed and high precision comparators, op-amps, ADC and DAC. The operating resolution is selectable from 256 channels to 16384 channels for pulse height analysis. It supports high count rate applications (typically 100 KHz) without significant dead time penalty. It can have an USB bus interface with simple changes. In general, the MCA gives a high performance, compact and low power alternative for portable and battery operated systems as well as for high end laboratory instruments. (author)

Take time to make time : What to consider when managing multi-channel sales systems with the objective to increase sales efficiency

OpenAIRE

ALM, RAGNAR; KYRÖNLAHTI, RUDY

2016-01-01

Traditional sales systems have been disrupted by technological developments. In order to  adapt, companies are changing the way they interact with their customers in business-to-business markets. In the last three decades, multi-channel strategies have spurred the proliferation of different sales channels and new ways of managing sales systems. The purpose of this research was to investigate what should be considered when managing multi-channel sales systems with the objective of increasing s...

Multiplex multivariate recurrence network from multi-channel signals for revealing oil-water spatial flow behavior.

Science.gov (United States)

Gao, Zhong-Ke; Dang, Wei-Dong; Yang, Yu-Xuan; Cai, Qing

2017-03-01

The exploration of the spatial dynamical flow behaviors of oil-water flows has attracted increasing interests on account of its challenging complexity and great significance. We first technically design a double-layer distributed-sector conductance sensor and systematically carry out oil-water flow experiments to capture the spatial flow information. Based on the well-established recurrence network theory, we develop a novel multiplex multivariate recurrence network (MMRN) to fully and comprehensively fuse our double-layer multi-channel signals. Then we derive the projection networks from the inferred MMRNs and exploit the average clustering coefficient and the spectral radius to quantitatively characterize the nonlinear recurrent behaviors related to the distinct flow patterns. We find that these two network measures are very sensitive to the change of flow states and the distributions of network measures enable to uncover the spatial dynamical flow behaviors underlying different oil-water flow patterns. Our method paves the way for efficiently analyzing multi-channel signals from multi-layer sensor measurement system.

Dilemmas pertaining to three canals in the mesiobuccal root of a maxillary second molar: a case report

Directory of Open Access Journals (Sweden)

Ankit Arora

2013-08-01

Full Text Available The mesiobuccal root of the maxillary molars is well known to pose a hindrance during endodontic therapy. Presented here is a case of a maxillary left second molar where three canals were located in its mesiobuccal root with the use of visual and diagnostic aids. Difficulties encountered during the process of unveiling the tooth's internal anatomy were discussed. The dilemmas encountered pertained to the root canal configuration, the nomenclature of the extra canals, and the justification for the presence of a third canal. The root canal configuration of 3-2-1 was confirmed for the mesiobuccal root using information gained from clinical, radiographic, and multi-detector computed tomography (MDCT scan findings. This case demonstrates the need for efforts to locate extra canals in the mesiobuccal root of the maxillary molars as their internal anatomy remains a mystery.

Dilemmas pertaining to three canals in the mesiobuccal root of a maxillary second molar: a case report.

Science.gov (United States)

Arora, Ankit; Acharya, Shashi Rashmi; Saraswathi, Muliya Vidya; Sharma, Padmaja; Ather, Amber

2013-08-01

The mesiobuccal root of the maxillary molars is well known to pose a hindrance during endodontic therapy. Presented here is a case of a maxillary left second molar where three canals were located in its mesiobuccal root with the use of visual and diagnostic aids. Difficulties encountered during the process of unveiling the tooth's internal anatomy were discussed. The dilemmas encountered pertained to the root canal configuration, the nomenclature of the extra canals, and the justification for the presence of a third canal. The root canal configuration of 3-2-1 was confirmed for the mesiobuccal root using information gained from clinical, radiographic, and multi-detector computed tomography (MDCT) scan findings. This case demonstrates the need for efforts to locate extra canals in the mesiobuccal root of the maxillary molars as their internal anatomy remains a mystery.

Multi-channel up-conversion infrared spectrometer and method of detecting a spectral distribution of light

DEFF Research Database (Denmark)

2015-01-01

A multi-channel infrared spectrometer for detecting an infrared spectrum of light received from an object. The spectrometer comprises a wavelength converter system comprising a nonlinear material and having an input side and an output side. The wavelength converter system comprises at least a first...... on the first side into light in a second output wavelength range output on the second side. The spectrometer further comprises a demultiplexer configured for demultiplexing light in the first up-conversion channel and light in the second up-conversion channel. The demultiplexer is located on the first side...

Opacity annotation of diffuse lung diseases using deep convolutional neural network with multi-channel information

Science.gov (United States)

Mabu, Shingo; Kido, Shoji; Hashimoto, Noriaki; Hirano, Yasushi; Kuremoto, Takashi

2018-02-01

This research proposes a multi-channel deep convolutional neural network (DCNN) for computer-aided diagnosis (CAD) that classifies normal and abnormal opacities of diffuse lung diseases in Computed Tomography (CT) images. Because CT images are gray scale, DCNN usually uses one channel for inputting image data. On the other hand, this research uses multi-channel DCNN where each channel corresponds to the original raw image or the images transformed by some preprocessing techniques. In fact, the information obtained only from raw images is limited and some conventional research suggested that preprocessing of images contributes to improving the classification accuracy. Thus, the combination of the original and preprocessed images is expected to show higher accuracy. The proposed method realizes region of interest (ROI)-based opacity annotation. We used lung CT images taken in Yamaguchi University Hospital, Japan, and they are divided into 32 × 32 ROI images. The ROIs contain six kinds of opacities: consolidation, ground-glass opacity (GGO), emphysema, honeycombing, nodular, and normal. The aim of the proposed method is to classify each ROI into one of the six opacities (classes). The DCNN structure is based on VGG network that secured the first and second places in ImageNet ILSVRC-2014. From the experimental results, the classification accuracy of the proposed method was better than the conventional method with single channel, and there was a significant difference between them.

Evaluation of K x-ray escape and crosstalk in CdTe detectors and multi-channel detectors

International Nuclear Information System (INIS)

Ohtsuchi, Tetsuro; Ohmori, Koichi; Tsutsui, Hiroshi; Baba, Sueki

1995-01-01

The simple structure of CdTe semiconductor detectors facilitates their downsizing, and their possible application to radiographic sensors has been studied. The escape of K X-rays from these detectors increases with reduction of their dimensions and affects the measurements of X- and gamma-ray spectra. K X-rays also produce crosstalk in multi-channel detectors with adjacent channels. Therefore, K X-rays which escape from the detector elements degrade both the precision of energy spectra and spatial resolution. The ratios of escape peak integrated counts to total photon counts for various sizes of CdTe single detectors were calculated for gamma rays using the Monte Carlo method. Also, escape and crosstalk ratios were simulated for the CdTe multi-channel detectors. The theoretical results were tested experimentally for 59.54-keV gamma rays from a 241 Am radioactive source. Results showed that escape ratios for single detectors were strongly dependent on element size and thickness. The escape and crosstalk ratios increased with closer channel pitch. The calculated results showed a good agreement with the experimental data. The calculations made it clear that K X-rays which escaped to neighboring channels induced crosstalk more frequently at smaller channel pitch in multichannel detectors. A radiation shielding grid which blocked incident photons between the boundary channels was also tested by experiment and by calculation. It was effective in reducing the probability of escape and crosstalk

TRANTHAC-1: transient thermal-hydraulic analysis code for HTGR core of multi-channel model

International Nuclear Information System (INIS)

Sato, Sadao; Miyamoto, Yoshiaki

1980-08-01

The computer program TRANTHAC-1 is for predicting thermal-hydraulic transient behavior in HTGR's core of pin-in-block type fuel elements, taking into consideration of the core flow distribution. The program treats a multi-channel model, each single channel representing the respective column composed of fuel elements. The fuel columns are grouped in flow control regions; each region is provided with an orifice assembly. In the region, all channels are of the same shape except one channel. Core heat is removed by downward flow of the control through the channel. In any transients, for given time-dependent power, total core flow, inlet coolant temperature and coolant pressure, the thermal response of the core can be determined. In the respective channels, the heat conduction in radial and axial direction are represented. And the temperature distribution in each channel with the components is calculated. The model and usage of the program are described. The program is written in FORTRAN-IV for computer FACOM 230-75 and it is composed of about 4,000 cards. The required core memory is about 75 kilowords. (author)

A high resolution 16 k multi-channel analyzer PC add-on card

International Nuclear Information System (INIS)

Kulkarni, C.P.; Paulson, Molly; Vaidya, P.P.

2001-01-01

This paper describes the system details of a 16 K channel resolution Multi-Channel Analyzer (MCA) developed at Electronics Division, BARC, which is used in high resolution nuclear spectroscopy systems for pulse height analysis. The high resolution data acquisition PC add-on card is architectured using a state of the art digital circuit design technology which makes use of a Field Programmable Gate Array (FPGA), and some of the most modern and advanced analog counterparts like low power, high speed and high precision comparators, Op-amps, ADCs and DACs etc. The 16 K MCA card gives an economic, compact, and low power alternative for nuclear pulse spectroscopy use. (author)

Evolution of canals system linking the Vistula, Dnieper and Neman basins

Science.gov (United States)

Brykala, Dariusz; Badziai, Vitali

2014-05-01

The aim of this study is to reconstruct landscape changes in the Polesie Region - one of the largest European swampy areas (Belarus), as a result of the creation and operation of a network of canals. From the 16th century efforts were undertaken to connect the Polish areas located in the drainage basins of the Black Sea and Baltic Sea with canals. Already in 1631 the Polish Sejm (parliament) approved the project to build a canal linking the River Berezina (Dnieper basin) with the River Neris (Neman basin). However, the complicated political and economic situation of the country did not allow doing this. Only in the second half of the 18th c. hetman Ogiński financed the construction of a canal linking the Dnieper and Neman basins. The canal connecting the River Szczara (Neman basin) with the River Jasiołda (Pripyat basin) was named after its creator - the Ogiński Canal. At the same time the construction of the Królewski (Royal) Canal linking the River Muchavets (Vistula basin) and the River Pina (Pripyat basin) was under way. The construction of the canal was completed in 1783. The winding channels of the Pina and Muchavets were straightened, and the numerous canals feeding the waterway system drained vast area of marshes and wetlands of the Polesia Region. The last element that connects the catchments of the Vistula and Neman is the Augustów Canal built in the years 1825-1839 (linking the catchments of the Biebrza and Neman). Numerous changes in political boundaries in the watershed area between the Black Sea and the Baltic Sea drainage basins caused the destruction of the hydraulic structures. All the analysed canals were completely destroyed during the two world wars. In the last 200 years the amount and type of locks and weirs has changed. For example, there were no weirs on the Royal Canal in the late 18th c., in the middle of the 19th c. there were 22 such structures, while now that number has gone down to 10. All canals were created for economic reasons

A 240-channel thick film multi-chip module for readout of silicon drift detectors

International Nuclear Information System (INIS)

Lynn, D.; Bellwied, R.; Beuttenmueller, R.; Caines, H.; Chen, W.; DiMassimo, D.; Dyke, H.; Elliott, D.; Grau, M.; Hoffmann, G.W.; Humanic, T.; Jensen, P.; Kleinfelder, S.A.; Kotov, I.; Kraner, H.W.; Kuczewski, P.; Leonhardt, B.; Li, Z.; Liaw, C.J.; LoCurto, G.; Middelkamp, P.; Minor, R.; Mazeh, N.; Nehmeh, S.; O'Conner, P.; Ott, G.; Pandey, S.U.; Pruneau, C.; Pinelli, D.; Radeka, V.; Rescia, S.; Rykov, V.; Schambach, J.; Sedlmeir, J.; Sheen, J.; Soja, B.; Stephani, D.; Sugarbaker, E.; Takahashi, J.; Wilson, K.

2000-01-01

We have developed a thick film multi-chip module for readout of silicon drift (or low capacitance ∼200 fF) detectors. Main elements of the module include a custom 16-channel NPN-BJT preamplifier-shaper (PASA) and a custom 16-channel CMOS Switched Capacitor Array (SCA). The primary design criteria of the module were the minimizations of the power (12 mW/channel), noise (ENC=490 e - rms), size (20.5 mmx63 mm), and radiation length (1.4%). We will discuss various aspects of the PASA design, with emphasis on the preamplifier feedback network. The SCA is a modification of an integrated circuit that has been previously described [1]; its design features specific to its application in the SVT (Silicon Vertex Tracker in the STAR experiment at RHIC) will be discussed. The 240-channel multi-chip module is a circuit with five metal layers fabricated in thick film technology on a beryllia substrate and contains 35 custom and commercial integrated circuits. It has been recently integrated with silicon drift detectors in both a prototype system assembly for the SVT and a silicon drift array for the E896 experiment at the Alternating Gradient Synchrotron at the Brookhaven National Laboratory. We will discuss features of the module's design and fabrication, report the test results, and emphasize its performance both on the bench and under experimental conditions

Salt intrusion in multi-channel estuaries: a case study in the Mekong Delta, Vietnam

Directory of Open Access Journals (Sweden)

A. D. Nguyen

2006-01-01

Full Text Available There is a well-tested theory for the computation of salt intrusion in alluvial estuaries that is fully analytical and predictive. The theory uses analytical equations to predict the mixing behaviour of the estuary based on measurable quantities, such as channel topography, river discharge and tidal characteristics. It applies to single-channel topographies and estuaries that demonstrate moderate tidal damping. The Mekong delta is a multi-channel estuary where the tide is damped due to a relatively strong river discharge (in the order of 2000 m3/s, even during the dry season. As a result the Mekong is a strongly riverine estuary. This paper aims to test if the theory can be applied to such a riverine multi-channel estuary, and to see if possible adjustments or generalisations need to be made. The paper presents salt intrusion measurements that were done by moving boat in 2005, to which the salt intrusion model was calibrated. The theory has been expanded to cater for tidal damping. Subsequently the model has been validated with observations made at fixed locations over the years 1998 and 1999. Finally it has been tested whether the Mekong calibration fits the overall predictive equations derived in other estuaries. The test has been successful and led to a slight adjustment of the predictive equation to cater for estuaries that experience a sloping bottom.

Design of multi-channel amplitude analyzer base on LonWorks

International Nuclear Information System (INIS)

Zhang Ying; Zhao Lihong; Chen Aihua

2008-01-01

The paper introduces the multi-channel analyzer which adopts LonWorks technology. The system detects the pulse peak by hardware circuits and controls data acquisition and network communication by Micro Controller and Unit and Neuron chip. SCM is programmed by Keil C51; the communication between SCM and nerve cell is realized by Neron C language, and the computer program is written by VB language. Test results show that this analyzer is with fast conversion speed and low power consumption. (authors)

Multi-channel unidirectional transmission of phononic crystal heterojunctions

Science.gov (United States)

Xu, Zhenlong; Tong, Jie; Wu, Fugen

2018-02-01

Two square steel columns are arranged in air to form two-dimensional square lattice phononic crystals (PNCs). Two PNCs can be combined into a non-orthogonal 45∘ heterojunction when the difference in the directional band gaps of the two PNC types is utilized. The finite element method is used to calculate the acoustic band structure, the heterogeneous junction transmission characteristics, acoustic field distribution, and many others. Results show that a non-orthogonal PNC heterojunction can produce a multi-channel unidirectional transmission of acoustic waves. With the square scatterer rotated, the heterojunction can select a frequency band for unidirectional transmission performance. This capability is particularly useful for constructing acoustic diodes with wide-bands and high-efficiency unidirectional transmission characteristics.

Multi-Channel RF System for MRI-Guided Transurethral Ultrasound Thermal Therapy

Science.gov (United States)

Yak, Nicolas; Asselin, Matthew; Chopra, Rajiv; Bronskill, Michael

2009-04-01

MRI-guided transurethral ultrasound thermal therapy is an approach to treating localized prostate cancer which targets precise deposition of thermal energy within a confined region of the gland. This treatment requires a system incorporating a heating applicator with multiple planar ultrasound transducers and associated RF electronics to control individual elements independently in order to achieve accurate 3D treatment. We report the design, construction, and characterization of a prototype multi-channel system capable of controlling 16 independent RF signals for a 16-element heating applicator. The main components are a control computer, microcontroller, and a 16-channel signal generator with 16 amplifiers, each incorporating a low-pass filter and transmitted/reflected power detection circuit. Each channel can deliver from 0.5 to 10 W of electrical power and good linearity from 3 to 12 MHz. Harmonic RF signals near the Larmor frequency of a 1.5 T MRI were measured to be below -30 dBm and heating experiments within the 1.5 T MR system showed no significant decrease in SNR of the temperature images. The frequency and power for all 16 channels could be changed in less than 250 ms, which was sufficiently rapid for proper performance of the control algorithms. A common backplane design was chosen which enabled an inexpensive, modular approach for each channel resulting in an overall system with minimal footprint.

Wall-cooling-induced mixed-convection flow recirculation in a vertical square-array multi-rod channel

International Nuclear Information System (INIS)

Luangdilok, W.; Todreas, N.E.

1989-01-01

This work investigated the structure of penetrative flow recirculation and associated flow conditions in a multi-rod channel induced by interassembly heat transfer that causes cooling through channel walls. Three investigation approaches, experimental, numerical, and analytical were employed in a complimentary fashion. Physical experiments involved water flow visualization and temperature measurement in a 4x4 rod square channel. Numerical experiments involved 3-dimensional simulations of water and sodium flow in a 2x2-rod channels. An approximate reverse flow model including Prandtl number effect was developed. A correlating equation based on the model and experiments was verified for water to correctly predict the trend of the 4x4-rod experimental penetration depth data. (orig.)

[Positioning diagnosis of benign positional paroxysmal vertigo by VNG].

Science.gov (United States)

Wang, Na; Chen, Taisheng; Lin, Peng; Song, Wei; Dong, Hong

2009-07-01

To analyze the value of positioning diagnosis of VNG (Videonystagmograph) in patients with benign paroxysmal positional vertigo (BPPV). One hundred and twenty-six patients with BPPV were enrolled in this retrospective study. Their positional nystagmus recorded by VNG in Dix-Hallpike and roll tests were analyzed to summarize the characteristics of nystagmus on nystagmography of various BPPV. Of 126 patients with BPPV diagnosed in our center, the posterior semicircular canals (PSC) were involved in 98 patients (77.8%), whereas the horizontal semicircular canal (HSC) and anterior semicircular canal (ASC) were involved in 17 (13.5%) and 5 (3.9%), respectively. Six patients (4.8%) confirmed combined-BPPV had HSC-BPPV and ipsilateral PSC-BPPV. Twenty-eight patients with PSC-BPPV had reversal phase on nystagmography. The nystagmus of patients with P/ASC-canalithiasis showed upward/downward on the vertical phase of nystagmography and orientated the opposite side on horizontal phase in the head hanging position, and the nystagmus reversed when returned to sit. Nystagmus on horizontal phase could be provoked when the head turned to both sides of the roll tests in patients with HSC-BPPV. If the nystagmus and the head-turning shared the same direction, then HSC-canalithiasis was confirmed, and the direction of the head-turning which provoked the stronger nystagmus indicates the lesion side. If the nystagmus and the head-turning had the opposite direction, then HSC-cupulolithiasis was confirmed, and the direction of the head-turning which provoked the weaker nystagmus indicates the lesion side. Positional nystagmus can be recorded objectively using VNG, According to which positioning the semicircular canal involved would be easier and more accurate. The recording conserved also could be helpful for clinical diagnosis and repositioning of BPPV.

Measurements of void fraction by an improved multi-channel conductance void meter

International Nuclear Information System (INIS)

Song, Chul-Hwa; Chung, Moon Ki; No, Hee Cheon

1998-01-01

An improved multi-channel Conductance Void Meter (CVM) was developed to measure a void fraction. Its measuring principle is basically based upon the differences of electrical conductance of a two-phase mixture due to the variation of void fraction around a sensor. The sensor is designed to be flush-mounted to the inner wall of the test section to avoid the flow disturbances. The signal processor with three channels is specially designed so as to minimize the inherent error due to the phase difference between channels. It is emphasized that the guard electrodes are electrically shielded in order not to affect the measurements of two-phase mixture conductance, but to make the electric fields evenly distributed in a measuring volume. Void fraction is measured for bubbly and slug flow regimes in a vertical air-water loop, and statistical signal processing techniques are applied to show that CVM has a good dynamic resolution which is required to investigate the structural developments of bubbly flow and the propagation of void waves in a flow channel. (author)

Multi-Channel Multi-Radio Using 802.11 Based Media Access for Sink Nodes in Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Kok-Keong Loo

2011-05-01

Full Text Available The next generation surveillance and multimedia systems will become increasingly deployed as wireless sensor networks in order to monitor parks, public places and for business usage. The convergence of data and telecommunication over IP-based networks has paved the way for wireless networks. Functions are becoming more intertwined by the compelling force of innovation and technology. For example, many closed-circuit TV premises surveillance systems now rely on transmitting their images and data over IP networks instead of standalone video circuits. These systems will increase their reliability in the future on wireless networks and on IEEE 802.11 networks. However, due to limited non-overlapping channels, delay, and congestion there will be problems at sink nodes. In this paper we provide necessary conditions to verify the feasibility of round robin technique in these networks at the sink nodes by using a technique to regulate multi-radio multichannel assignment. We demonstrate through simulations that dynamic channel assignment scheme using multi-radio, and multichannel configuration at a single sink node can perform close to optimal on the average while multiple sink node assignment also performs well. The methods proposed in this paper can be a valuable tool for network designers in planning network deployment and for optimizing different performance objectives.

Multi-channel multi-radio using 802.11 based media access for sink nodes in wireless sensor networks.

Science.gov (United States)

Campbell, Carlene E-A; Khan, Shafiullah; Singh, Dhananjay; Loo, Kok-Keong

2011-01-01

The next generation surveillance and multimedia systems will become increasingly deployed as wireless sensor networks in order to monitor parks, public places and for business usage. The convergence of data and telecommunication over IP-based networks has paved the way for wireless networks. Functions are becoming more intertwined by the compelling force of innovation and technology. For example, many closed-circuit TV premises surveillance systems now rely on transmitting their images and data over IP networks instead of standalone video circuits. These systems will increase their reliability in the future on wireless networks and on IEEE 802.11 networks. However, due to limited non-overlapping channels, delay, and congestion there will be problems at sink nodes. In this paper we provide necessary conditions to verify the feasibility of round robin technique in these networks at the sink nodes by using a technique to regulate multi-radio multichannel assignment. We demonstrate through simulations that dynamic channel assignment scheme using multi-radio, and multichannel configuration at a single sink node can perform close to optimal on the average while multiple sink node assignment also performs well. The methods proposed in this paper can be a valuable tool for network designers in planning network deployment and for optimizing different performance objectives.

Multi-channel WDM RZ-to-NRZ format conversion at 50 Gbit/s based on single silicon microring resonator

DEFF Research Database (Denmark)

Ding, Yunhong; Peucheret, Christophe; Pu, Minhao

2010-01-01

We comprehensively analyze multiple WDM channels RZ-to- NRZ format conversion using a single microring resonator. The scheme relies on simultaneous suppression of the first order harmonic components in the spectra of all the RZ channels. An optimized silicon microring resonator with free spectral...... range of 100 GHz and Q value of 7900 is designed and fabricated for this purpose. Multi-channel RZ-to-NRZ format conversion is demonstrated experimentally at 50 Gbit/s for WDM channels with 200 GHz channel spacing using the fabricated device. Bit error rate (BER)measurements show very good conversion...

Towards a neuromorphic vestibular system.

Science.gov (United States)

Corradi, Federico; Zambrano, Davide; Raglianti, Marco; Passetti, Giovanni; Laschi, Cecilia; Indiveri, Giacomo

2014-10-01

The vestibular system plays a crucial role in the sense of balance and spatial orientation in mammals. It is a sensory system that detects both rotational and translational motion of the head, via its semicircular canals and otoliths respectively. In this work, we propose a real-time hardware model of an artificial vestibular system, implemented using a custom neuromorphic Very Large Scale Integration (VLSI) multi-neuron chip interfaced to a commercial Inertial Measurement Unit (IMU). The artificial vestibular system is realized with spiking neurons that reproduce the responses of biological hair cells present in the real semicircular canals and otholitic organs. We demonstrate the real-time performance of the hybrid analog-digital system and characterize its response properties, presenting measurements of a successful encoding of angular velocities as well as linear accelerations. As an application, we realized a novel implementation of a recurrent integrator network capable of keeping track of the current angular position. The experimental results provided validate the hardware implementation via comparisons with a detailed computational neuroscience model. In addition to being an ideal tool for developing bio-inspired robotic technologies, this work provides a basis for developing a complete low-power neuromorphic vestibular system which integrates the hardware model of the neural signal processing pathway described with custom bio-mimetic gyroscopic sensors, exploiting neuromorphic principles in both mechanical and electronic aspects.

Canal shaping of different single-file systems in curved root canals

Directory of Open Access Journals (Sweden)

Maurizio D'Amario

2017-12-01

Full Text Available Background/Purpose: This study compared maintenance of canal anatomy, occurrence of apical transportation, and working time observed after instrumentation with One Shape New Generation rotary system (Micro-Mega, with those observed after instrumentation with Reciproc (VDW and WaveOne (Dentsply-Maillefer reciprocating systems. Materials and methods: The mesial canals of 45 mandibular molars (curvature angles between 35° and 45° were selected. Specimens were randomly divided into three groups, and canal preparations were performed using One Shape, Reciproc, or WaveOne systems (size #25. A digital double radiographic technique was used to determine apical transportation and change in angle of curvature. Also, working time and instrument failures were recorded. Data were statistically analyzed. Results: During preparation, no file fractured. No statistically significant differences were found among groups. No system showed a significantly faster preparation time than others (P>0.05. All instruments maintained the original canal curvature well and were safe to use. Conclusion: Both continuous rotary instrument and reciprocating systems did not have any influence on the presence of apical transportation or caused an alteration in angle of canal curvature. Keywords: canal curvature, canal straightening, endodontics, reciprocating motion, single file instrumentation

Operational Criteria for the Design of Front-Office Processes in Multi-Channel Service Delivery Systems

OpenAIRE

Sousa, Rui; Amorim, Marlene

2010-01-01

This paper identifies relevant operational factors that affect the design of front-office processes in Multi-Channel Service Delivery Systems. Based on two in-depth case studies in banking and telecommunications, we distinguish four operational factors: i) characteristics of the inputs and outputs of the service activities; ii) characteristics of the transformation taking place; iii) the expected utilization; iv) the economics of developing the activities in the channels. Building on these re...

Distributed capillary adiabatic tissue homogeneity model in parametric multi-channel blind AIF estimation using DCE-MRI.

Science.gov (United States)

Kratochvíla, Jiří; Jiřík, Radovan; Bartoš, Michal; Standara, Michal; Starčuk, Zenon; Taxt, Torfinn

2016-03-01

One of the main challenges in quantitative dynamic contrast-enhanced (DCE) MRI is estimation of the arterial input function (AIF). Usually, the signal from a single artery (ignoring contrast dispersion, partial volume effects and flow artifacts) or a population average of such signals (also ignoring variability between patients) is used. Multi-channel blind deconvolution is an alternative approach avoiding most of these problems. The AIF is estimated directly from the measured tracer concentration curves in several tissues. This contribution extends the published methods of multi-channel blind deconvolution by applying a more realistic model of the impulse residue function, the distributed capillary adiabatic tissue homogeneity model (DCATH). In addition, an alternative AIF model is used and several AIF-scaling methods are tested. The proposed method is evaluated on synthetic data with respect to the number of tissue regions and to the signal-to-noise ratio. Evaluation on clinical data (renal cell carcinoma patients before and after the beginning of the treatment) gave consistent results. An initial evaluation on clinical data indicates more reliable and less noise sensitive perfusion parameter estimates. Blind multi-channel deconvolution using the DCATH model might be a method of choice for AIF estimation in a clinical setup. © 2015 Wiley Periodicals, Inc.

Hydrology and environmental aspects of Erie Canal (1817-99)

Science.gov (United States)

Langbein, Walter Basil

1976-01-01

As the first major water project in the United States, the old Erie Canal provides an example of the hydrological and environmental consequences of water development. The available record shows that the project aroused environmental fears that the canal might be impaired by the adverse hydrologic effects of land development induced by the canal. Water requirements proved greater than anticipated, and problems of floods and hydraulic inefficiencies beset navigation throughout its history. The Erie Canal proved the practicality of major hydraulic works to the extent that operations and maintenance could cope with the burdens of deficiencies in design. The weight of prior experience that upland streams, such as the Potomac and Mohawk Rivers, had proved unsatisfactory for dependable navigation, led to a decision to build an independent canal which freed the location from the constraints of river channels and made possible a cross-country water route directly to Lake Erie. The decision on dimensioning the canal prism--chiefly width and depth-involved balance between a fear of building too small and thus not achieving the economic potentials, and a fear of building too expensively. The constraints proved effective, and for the first part of its history the revenues collected were sufficient to repay all costs. So great was the economic advantage of the canal that the rising trend in traffic soon induced an enlargement of the canal cross section, based upon a new but riskier objective-build as large as the projected trend in toll revenues would finance. The increased revenues did not materialize. Water supplies were a primary concern for both the planners and the operators of the canal. Water required for lockage, although the most obvious to the planners, proved to be a relatively minor item compared with the amounts of water that were required to compensate for leakage through the bed and banks of the canal. Leakage amounted to about 8 inches of depth per day. The total

Multi-Dielectric Brownian Dynamics and Design-Space-Exploration Studies of Permeation in Ion Channels.

Science.gov (United States)

Siksik, May; Krishnamurthy, Vikram

2017-09-01

This paper proposes a multi-dielectric Brownian dynamics simulation framework for design-space-exploration (DSE) studies of ion-channel permeation. The goal of such DSE studies is to estimate the channel modeling-parameters that minimize the mean-squared error between the simulated and expected "permeation characteristics." To address this computational challenge, we use a methodology based on statistical inference that utilizes the knowledge of channel structure to prune the design space. We demonstrate the proposed framework and DSE methodology using a case study based on the KcsA ion channel, in which the design space is successfully reduced from a 6-D space to a 2-D space. Our results show that the channel dielectric map computed using the framework matches with that computed directly using molecular dynamics with an error of 7%. Finally, the scalability and resolution of the model used are explored, and it is shown that the memory requirements needed for DSE remain constant as the number of parameters (degree of heterogeneity) increases.

Hydrostatic fluid pressure in the vestibular organ of the guinea pig.

Science.gov (United States)

Park, Jonas J-H; Boeven, Jahn J; Vogel, Stefan; Leonhardt, Steffen; Wit, Hero P; Westhofen, Martin

2012-07-01

Since inner ear hair cells are mechano-electric transducers the control of hydrostatic pressure in the inner ear is crucial. Most studies analyzing dynamics and regulation of inner ear hydrostatic pressure performed pressure measurements in the cochlea. The present study is the first one reporting about absolute hydrostatic pressure values in the labyrinth. Hydrostatic pressure of the endolymphatic system was recorded in all three semicircular canals. Mean pressure values were 4.06 cmH(2)O ± 0.61 in the posterior, 3.36 cmH(2)O ± 0.94 in the anterior and 3.85 cmH(2)O ± 1.38 in the lateral semicircular canal. Overall hydrostatic pressure in the vestibular organ was 3.76 cmH(2)O ± 0.36. Endolymphatic hydrostatic pressure in all three semicircular canals is the same (p = 0.310). With regard to known endolymphatic pressure values in the cochlea from past studies vestibular pressure values are comparable to cochlear values. Until now it is not known whether the reuniens duct and the Bast's valve which are the narrowest passages in the endolymphatic system are open or closed. Present data show that most likely the endolymphatic system is a functionally open entity.

Transparent model of temporal bone and vestibulocochlear organ made by 3D printing.

Science.gov (United States)

Suzuki, Ryoji; Taniguchi, Naoto; Uchida, Fujio; Ishizawa, Akimitsu; Kanatsu, Yoshinori; Zhou, Ming; Funakoshi, Kodai; Akashi, Hideo; Abe, Hiroshi

2018-01-01

The vestibulocochlear organ is composed of tiny complex structures embedded in the petrous part of the temporal bone. Landmarks on the temporal bone surface provide the only orientation guide for dissection, but these need to be removed during the course of dissection, making it difficult to grasp the underlying three-dimensional structures, especially for beginners during gross anatomy classes. We report herein an attempt to produce a transparent three-dimensional-printed model of the human ear. En bloc samples of the temporal bone from donated cadavers were subjected to computed tomography (CT) scanning, and on the basis of the data, the surface temporal bone was reconstructed with transparent resin and the vestibulocochlear organ with white resin to create a 1:1.5 scale model. The carotid canal was stuffed with red cotton, and the sigmoid sinus and internal jugular vein were filled with blue clay. In the inner ear, the internal acoustic meatus, cochlea, and semicircular canals were well reconstructed in detail with white resin. The three-dimensional relationships of the semicircular canals, spiral turns of the cochlea, and internal acoustic meatus were well recognizable from every direction through the transparent surface resin. The anterior semicircular canal was obvious immediately beneath the arcuate eminence, and the topographical relationships of the vestibulocochlear organ and adjacent great vessels were easily discernible. We consider that this transparent temporal bone model will be a very useful aid for better understanding of the gross anatomy of the vestibulocochlear organ.

A customizable multi-channel loudness compensation method based on WDRC for digital hearing aids

Science.gov (United States)

Hu, Jiebin; Wang, Mingjiang; Ma, Min

2017-08-01

Loudness compensation is the most significant signal processing algorithm in digital hearing aids at present. An algorithm of multi-channel loudness compensation for embedded system has been put forward in this paper. The number of channels is customizable in this algorithm. The algorithm can set different number and different width of channels for each patient based on frequency domain wide dynamic range compression. First, according to the requirement of patient to divide the frequency domain into multiple unequal frequency bands. And then calculate the gain of each channel according to the input-output curve of sound pressure level. Finally, the time-domain impulse response of gain is computed from Mel filter banks. It is used in conjunction with speech enhancement processing in hearing aids. Simulation results show that the algorithm can effectively enhance the loudness for different frequencies.

Canal de Mensagens de Trânsito

OpenAIRE

Egon Cervieri Guterres

2010-01-01

Informe Setorial: O Canal de Mensagens de Trânsito (Traffic Message Channel - TMC) é uma padronização internacional para a distribuição de informações (conteúdo) sobre a situação do trânsito urbano local e inter-regional, em tempo real, de forma eletrônica e diretamente aos motoristas. Traz para os cidadãos, em mensagens eletrônicas simples e acessíveis, informações sobre congestionamentos, acidentes, obras na pista, problemas climáticos (alagamentos, asfalto escorregadio, nevoeiro...) e desv...

Advanced Modular, Multi-Channel, High Speed Fiber Optic Sensing System for Acoustic Emissions Monitoring, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Intelligent Fiber Optic Systems Corporation (IFOS) proposes to prove the feasibility of innovations based on ultra-light-weight, ultra-high-speed, multi-channel,...

The dynamic time-over-threshold method for multi-channel APD based gamma-ray detectors

Energy Technology Data Exchange (ETDEWEB)

Orita, T., E-mail: orita.tadashi@jaea.go.jp [Japan Atomic Energy Agency, Fukushima (Japan); Shimazoe, K.; Takahashi, H. [Department of Nuclear Management and Engineering, The University of Tokyo, Bunkyō (Japan)

2015-03-01

t– Recent advances in manufacturing technology have enabled the use of multi-channel pixelated detectors in gamma-ray imaging applications. When obtaining gamma-ray measurements, it is important to obtain pulse height information in order to avoid unnecessary events such as scattering. However, as the number of channels increases, more electronics are needed to process each channel's signal, and the corresponding increases in circuit size and power consumption can result in practical problems. The time-over-threshold (ToT) method, which has recently become popular in the medical field, is a signal processing technique that can effectively avoid such problems. However, ToT suffers from poor linearity and its dynamic range is limited. We therefore propose a new ToT technique called the dynamic time-over-threshold (dToT) method [4]. A new signal processing system using dToT and CR-RC shaping demonstrated much better linearity than that of a conventional ToT. Using a test circuit with a new Gd{sub 3}Al{sub 2}Ga{sub 3}O{sub 12} (GAGG) scintillator and an avalanche photodiode, the pulse height spectra of {sup 137}Cs and {sup 22}Na sources were measured with high linearity. Based on these results, we designed a new application-specific integrated circuit (ASIC) for this multi-channel dToT system, measured the spectra of a {sup 22}Na source, and investigated the linearity of the system.

[Root canal treatment of mandibular first premolar with 4 root canals: a case report].

Science.gov (United States)

Liu, Xin-yang; Zhan, Fu-Liang

2015-10-01

The mandibular first premolar can be considered one of the most challenging teeth to treat, due to the complexity of its root canal morphology and increased incidence of multiple canals. A case of endodontic treatment of a mandibular first premolar exhibiting a total of 4 distinct root canals and 4 apical foramina was described. Anatomic variation of root canal morphology should be considered in endodontic treatment to ensure a favorable healing outcome, and its identification could be enhanced by careful examination using a dental operating microscope. Obturation of root canals using a warm vertical compaction technique with a highly-radiopaque root canal sealer, such as AH Plus, after careful ultrasonic activated irrigation might allow the flow of sealer into the narrowed but unprepared part of the canal, thereby facilitating optimum chemo-mechanical debridement of the root canal system.

An integrated analog O/E/O link for multi-channel laser neurons

Energy Technology Data Exchange (ETDEWEB)

Nahmias, Mitchell A., E-mail: mnahmias@princeton.edu; Tait, Alexander N.; Tolias, Leonidas; Chang, Matthew P.; Ferreira de Lima, Thomas; Shastri, Bhavin J.; Prucnal, Paul R. [Electrical Engineering Department, Princeton University, 41 Olden St, Princeton, New Jersey 08540 (United States)

2016-04-11

We demonstrate an analog O/E/O electronic link to allow integrated laser neurons to accept many distinguishable, high bandwidth input signals simultaneously. This device utilizes wavelength division multiplexing to achieve multi-channel fan-in, a photodetector to sum signals together, and a laser cavity to perform a nonlinear operation. Its speed outpaces accelerated-time neuromorphic electronics, and it represents a viable direction towards scalable networking approaches.

The development of a digital multi-channel pulse height analysis

International Nuclear Information System (INIS)

Huang Shanshan; Sang Ziru; Liang Futian; Chen Lian; Liang Hao; Jin Ge

2012-01-01

A kind of digital multi-channel analyzer which was developed for Nuclear and Particle Experiment of Undergraduate Student in university was introduced. The input signal is digitalized with a high speed ADC, and feed to a FPGA for seeking peak, recording, spectrometer processing and displaying automatically. The principle of digital searching peck was given in the paper. In order to improve the capability of anti-noise, a dual digital thresholds and dual buffer memories was designed. Aiming at the influence of nonlinear of ADC to the system, a revised algorithm was designed to ensure the channel width uniformity. Since the huge sampling and storaging data of MCA, a method of parallel work of double memory was used, just separated empty transmit data and stored count, reduced the dead time and data overflowing. The host computer can set up and monitor MCA real-time, read and write data from MCA by an USB interface. Contrasts commercial MCA, the MCA has a good result in function and price. (authors)

Vestibular evoked myogenic potentials and video head impulse test in patients with vertigo, dizziness and imbalance.

Science.gov (United States)

Skorić, Magdalena Krbot; Adamec, Ivan; Pavičić, Tin; Pavlović, Ivan; Ruška, Berislav; Crnošija, Luka; Habek, Mario

2017-05-01

The aim of this study was to compare vestibular evoked myogenic potentials (VEMP) and video head impulse test (vHIT) results in patients presenting with vertigo and dizziness. We retrospectively analyzed data of all patients with the chief complaint of vertigo, dizziness, or imbalance that underwent VEMP and vHIT from January 2015 to January 2016. A total of 117 patients (73 females, mean age 53.92±16.76) fulfilled inclusion criteria: group 1 included patients with the final diagnosis of vestibular neuritis (VN) (N=31 (16 right and 15 left VN)), group 2 included patients with the final diagnosis of vertigo of central origin (N=23) and group 3 included patients with the final diagnosis of unspecified dizziness (N=63). There was significant correlation between oVEMP asymmetry and asymmetry of the lateral canals 60ms gains on vHIT (r=0.225, p=0.026). Significant correlation between oVEMP and vHIT asymmetry was present in VN patients (r=0.749, p<0.001), while no correlation was found in the groups 2 and 3. oVEMP and vHIT lateral canals asymmetries were significantly greater in patients with vestibular neuritis. Furthermore, positive correlations of oVEMP amplitudes with 60ms gain of the lateral semicircular canal and slope of the anterior semicircular canal on vHIT, and cVEMP with slope of the posterior semicircular canal on the vHIT were found. These changes were significantly more pronounced in patients with vestibular neuritis. In conclusion, VEMPs and vHIT data should be used complementarily; asymmetry on both tests strongly supports peripheral vestibular system involvement. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of free-surface on design charts for open channels

African Journals Online (AJOL)

2011-12-14

Dec 14, 2011 ... Normal depth is an important parameter for the design of channels and canals. For rectangular, trapezoidal, and circular channel sections it is possible to express normal depth by a trial-and-error procedure or analytically. However, the effects of free-surface on the design charts for determination of the ...

Dynamic analysis of multiple nuclear-coupled boiling channels based on a multi-point reactor model

International Nuclear Information System (INIS)

Lee, J.D.; Pan Chin

2005-01-01

This work investigates the non-linear dynamics and stabilities of a multiple nuclear-coupled boiling channel system based on a multi-point reactor model using the Galerkin nodal approximation method. The nodal approximation method for the multiple boiling channels developed by Lee and Pan [Lee, J.D., Pan, C., 1999. Dynamics of multiple parallel boiling channel systems with forced flows. Nucl. Eng. Des. 192, 31-44] is extended to address the two-phase flow dynamics in the present study. The multi-point reactor model, modified from Uehiro et al. [Uehiro, M., Rao, Y.F., Fukuda, K., 1996. Linear stability analysis on instabilities of in-phase and out-of-phase modes in boiling water reactors. J. Nucl. Sci. Technol. 33, 628-635], is employed to study a multiple-channel system with unequal steady-state neutron density distribution. Stability maps, non-linear dynamics and effects of major parameters on the multiple nuclear-coupled boiling channel system subject to a constant total flow rate are examined. This study finds that the void-reactivity feedback and neutron interactions among subcores are coupled and their competing effects may influence the system stability under different operating conditions. For those cases with strong neutron interaction conditions, by strengthening the void-reactivity feedback, the nuclear-coupled effect on the non-linear dynamics may induce two unstable oscillation modes, the supercritical Hopf bifurcation and the subcritical Hopf bifurcation. Moreover, for those cases with weak neutron interactions, by quadrupling the void-reactivity feedback coefficient, period-doubling and complex chaotic oscillations may appear in a three-channel system under some specific operating conditions. A unique type of complex chaotic attractor may evolve from the Rossler attractor because of the coupled channel-to-channel thermal-hydraulic and subcore-to-subcore neutron interactions. Such a complex chaotic attractor has the imbedding dimension of 5 and the

MULTIPLE SPINAL CANAL MENINGIOMAS

Directory of Open Access Journals (Sweden)

Nandigama Pratap Kumar

2016-10-01

Full Text Available BACKGROUND Meningiomas of the spinal canal are common tumours with the incidence of 25 percent of all spinal cord tumours. But multiple spinal canal meningiomas are rare in compare to solitary lesions and account for 2 to 3.5% of all spinal meningiomas. Most of the reported cases are both intra cranial and spinal. Exclusive involvement of the spinal canal by multiple meningiomas are very rare. We could find only sixteen cases in the literature to the best of our knowledge. Exclusive multiple spinal canal meningiomas occurring in the first two decades of life are seldom reported in the literature. We are presenting a case of multiple spinal canal meningiomas in a young patient of 17 years, who was earlier operated for single lesion. We analysed the literature, with illustration of our case. MATERIALS AND METHODS In September 2016, we performed a literature search for multiple spinal canal meningiomas involving exclusively the spinal canal with no limitation for language and publication date. The search was conducted through http://pubmed.com, a wellknown worldwide internet medical address. To the best of our knowledge, we could find only sixteen cases of multiple meningiomas exclusively confined to the spinal canal. Exclusive multiple spinal canal meningiomas occurring in the first two decades of life are seldom reported in the literature. We are presenting a case of multiple spinal canal meningiomas in a young patient of 17 years, who was earlier operated for solitary intradural extra medullary spinal canal meningioma at D4-D6 level, again presented with spastic quadriparesis of two years duration and MRI whole spine demonstrated multiple intradural extra medullary lesions, which were excised completely and the histopathological diagnosis was transitional meningioma. RESULTS Patient recovered from his weakness and sensory symptoms gradually and bladder and bowel symptoms improved gradually over a period of two to three weeks. CONCLUSION Multiple

Characteristics of crosstalk in the reproduced output of a newly developed multi-channel MR head

International Nuclear Information System (INIS)

Machida, K.; Hayashi, N.; Yoneda, Y.; Numazawa, J.; Kohro, M.; Tanabe, T.

2001-01-01

We prepared the multi-channel magnetoresistive head with a simple structural design and it has the advantages of high-density recording and ultra-high transfer rate. Characteristics of crosstalk in the reproduced output of our head have been estimated by a micromagnetic calculation using the Landau-Lifshitz-Gilbert (LLG) equation, while the specimen head was fabricated and evaluated. As a result, by applying a magnetic field of 40 Oe only between adjacent channels, the crosstalk was much decreased without reducing the reproduced output

Multi-scale viscosity model of turbulence for fully-developed channel flows

International Nuclear Information System (INIS)

Kriventsev, V.; Yamaguchi, A.; Ninokata, H.

2001-01-01

The full text follows. Multi-Scale Viscosity (MSV) model is proposed for estimation of the Reynolds stresses in turbulent fully-developed flow in a straight channel of an arbitrary shape. We assume that flow in an ''ideal'' channel is always stable, i.e. laminar, but turbulence is developing process of external perturbations cased by wall roughness and other factors. We also assume that real flows are always affected by perturbations of every scale lower than the size of the channel. And the turbulence is generated in form of internal, or ''turbulent'' viscosity increase to preserve stability of ''disturbed'' flow. The main idea of MSV can be expressed in the following phenomenological rule: A local deformation of axial velocity can generate the turbulence with the intensity that keeps the value of local turbulent Reynolds number below some critical value. Here, the local turbulent Reynolds number is defined as a product of value of axial velocity deformation for a given scale and generic length of this scale divided by accumulated value of laminar and turbulent viscosity of lower scales. In MSV, the only empirical parameter is the critical Reynolds number that is estimated to be around 100. It corresponds for the largest scale which is hydraulic diameter of the channel and, therefore represents the regular Reynolds number. Thus, the value Re=100 corresponds to conditions when turbulent flow can appear in case of ''significant'' (comparable with size of channel) velocity disturbance in boundary and/or initial conditions for velocity. Of course, most of real flows in channels with relatively smooth walls remain laminar for this small Reynolds number because of absence of such ''significant'' perturbations. MSV model has been applied to the fully-developed turbulent flows in straight channels such as a circular tube and annular channel. Friction factor and velocity profiles predicted with MSV are in a very good agreement with numerous experimental data. Position of

Autonomous miniaturised device with USB interface for pulse height analysis and multi-channel scaling (TUKAN-8K-USB)

International Nuclear Information System (INIS)

Guzik, Z.; Borsuk, S.; Plominski, M.; Traczyk, K.

2005-01-01

We present autonomous a 8K-channel miniature device designed for spectroscopy or intensity vs. time measurements. The device (TUKAN-8K-USB) is based on the USB interface, and is contained in a screened separate box - it can be proved either directly from the USB port or from an external DC source (wall adapter of battery). The device may work in two independent operational modes: Multi-Channel Analysis (MCA) and Multi-Channel Scaling (MCS). The crucial MCA component - Peak detect and Hold circuitry - is featuring a novel architecture based on a diamond transistor. Its analog stage can accept analog pulses with front edges down to 100 ns and has a differential linearity below 0.5% (full scale sliding scale averaging). Automatic stops on count in Region-Of-Interest (ROI) and on preset live or real time are implemented. The MCS works at medium speed counting rates (up to 8 MHz), with preset dwell time, number of channels and multi-sweep mode. Each these parameters can also be controlled externally. Digital interfacing is based on four used configurable logical I/O lines. A single CYCLONE EP1C3 Altera FPGA provides all control functions. The USB communication is based on FYDI FIFO controller. The analyzer is equipped with advanced, user-friendly software, which is subjected of another publication. )author)

Microbiological indicators of water quality in the Xochimilco canals, Mexico City.

Science.gov (United States)

Juárez-Figueroa, Luis Alfredo; Silva-Sánchez, Jesús; Uribe-Salas, Felipe Javier; Cifuentes-García, Enrique

2003-01-01

To quantify microbiology indicators of fecal contamination in the effluents of two waste water treatment plants and in samples collected in several canals in Xochimilco. A cross sectional study was performed. Ten sites, 5 from plant effluents and 5 from canals, were selected for sampling during November and December 2001. Fecal coliforms and enterococci were quantified by membrane filtration, male specific (F+) and somatic coliphages by double agar layer technique, and Cryptosporidium oocysts and Giardia cysts by concentration with Envirocheck filter followed by immunofluorescence microscopy quantification. The average of organisms counts from effluents and canal water were compared with t Student test. Treated water discharge in canals showed a low count of Fecal Coliforms (average 40.4/100 ml), enterococci (average 58.8/100 ml) and Cryptosporidium oocysts (average 13.2/100 l), while coliphages and Giardia cyst rendered higher counts (average 1467.5/100 ml and 1199.8/100 l, respectively) suggesting the water treatment methods could fail to remove these agents. A significant lower count of Giardia cysts (average 45/100 l) and no Cryptosporidium oocysts were found in irrigation canals, which suggests a natural clearance of these pathogens. Strains of Escherichia coli isolated in one of the canals contaminated with sewage had antimicrobial multi-resistance that was transferred by conjugation suggesting that resistance is encoded in a plasmid potentially transferable to other pathogenic bacteria. Cost effective and culturally acceptable waste treatment methods will require careful planning and consultation if they are to be adopted and mantained by local populations.

Multi-Channel Electroencephalogram (EEG) Signal Acquisition and its Effective Channel selection with De-noising Using AWICA for Biometric System

OpenAIRE

B.Sabarigiri; D.Suganyadevi

2014-01-01

the embedding of low cost electroencephalogram (EEG) sensors in wireless headsets gives improved authentication based on their brain wave signals has become a practical opportunity. In this paper signal acquisition along with effective multi-channel selection from a specific area of the brain and denoising using AWICA methods are proposed for EEG based personal identification. At this point, to develop identification system the steps are as follows. (i) the high-quality device with the least ...

THEORETICAL RESEARCH ON THE MULTI-CHANNEL REACTION MECHANISM AND KINETICS OF HNCS WITH OH-

Directory of Open Access Journals (Sweden)

Li-Jie Hou

Full Text Available We presented a theoretical study on the detailed reaction mechanism and kinetics of the HNCS molecule with the OH-. The barrierless minimum energy path and the most favorable entrance channel have been determined by study the thermodynamic and kinetic characters of the channel with low energy barrier. The B3LYP/6-311++G** method was employed for all the geometrical optimizations and a multi-level extrapolation method based on the G3 energies was employed for further energy refinements. In addition, the analysis of the combining interaction between hydroxide ion and HNCS was performed by natural bond orbitals (NBO analysis. The calculation results indicated that the reaction of OH- with HNCS had four channels, and the channel of H-atom in HNCS direct extraction to OH- (OH-+HNCS→IM1→TS3→IM4→P2(SCN- +H2O in singlet state was the main channel with the low potential energy and high equilibrium constant and reaction rate constant. SCN- and H2O were main products.

Nerve canals at the fundus of the internal auditory canal on high-resolution temporal bone CT

International Nuclear Information System (INIS)

Ji, Yoon Ha; Youn, Eun Kyung; Kim, Seung Chul

2001-01-01

To identify and evaluate the normal anatomy of nerve canals in the fundus of the internal auditory canal which can be visualized on high-resolution temporal bone CT. We retrospectively reviewed high-resolution (1 mm thickness and interval contiguous scan) temporal bone CT images of 253 ears in 150 patients who had not suffered trauma or undergone surgery. Those with a history of uncomplicated inflammatory disease were included, but those with symptoms of vertigo, sensorineural hearing loss, or facial nerve palsy were excluded. Three radiologists determined the detectability and location of canals for the labyrinthine segment of the facial, superior vestibular and cochlear nerve, and the saccular branch and posterior ampullary nerve of the inferior vestibular nerve. Five bony canals in the fundus of the internal auditory canal were identified as nerve canals. Four canals were identified on axial CT images in 100% of cases; the so-called singular canal was identified in only 68%. On coronal CT images, canals for the labyrinthine segment of the facial and superior vestibular nerve were seen in 100% of cases, but those for the cochlear nerve, the saccular branch of the inferior vestibular nerve, and the singular canal were seen in 90.1%, 87.4% and 78% of cases, respectiveIy. In all detectable cases, the canal for the labyrinthine segment of the facial nerve was revealed as one which traversed anterolateralIy, from the anterosuperior portion of the fundus of the internal auditory canal. The canal for the cochlear nerve was located just below that for the labyrinthine segment of the facial nerve, while that canal for the superior vestibular nerve was seen at the posterior aspect of these two canals. The canal for the saccular branch of the inferior vestibular nerve was located just below the canal for the superior vestibular nerve, and that for the posterior ampullary nerve, the so-called singular canal, ran laterally or posteolateralIy from the posteroinferior aspect of

Nerve canals at the fundus of the internal auditory canal on high-resolution temporal bone CT

Energy Technology Data Exchange (ETDEWEB)

Ji, Yoon Ha; Youn, Eun Kyung; Kim, Seung Chul [Sungkyunkwan Univ., School of Medicine, Seoul (Korea, Republic of)

2001-12-01

To identify and evaluate the normal anatomy of nerve canals in the fundus of the internal auditory canal which can be visualized on high-resolution temporal bone CT. We retrospectively reviewed high-resolution (1 mm thickness and interval contiguous scan) temporal bone CT images of 253 ears in 150 patients who had not suffered trauma or undergone surgery. Those with a history of uncomplicated inflammatory disease were included, but those with symptoms of vertigo, sensorineural hearing loss, or facial nerve palsy were excluded. Three radiologists determined the detectability and location of canals for the labyrinthine segment of the facial, superior vestibular and cochlear nerve, and the saccular branch and posterior ampullary nerve of the inferior vestibular nerve. Five bony canals in the fundus of the internal auditory canal were identified as nerve canals. Four canals were identified on axial CT images in 100% of cases; the so-called singular canal was identified in only 68%. On coronal CT images, canals for the labyrinthine segment of the facial and superior vestibular nerve were seen in 100% of cases, but those for the cochlear nerve, the saccular branch of the inferior vestibular nerve, and the singular canal were seen in 90.1%, 87.4% and 78% of cases, respectiveIy. In all detectable cases, the canal for the labyrinthine segment of the facial nerve was revealed as one which traversed anterolateralIy, from the anterosuperior portion of the fundus of the internal auditory canal. The canal for the cochlear nerve was located just below that for the labyrinthine segment of the facial nerve, while that canal for the superior vestibular nerve was seen at the posterior aspect of these two canals. The canal for the saccular branch of the inferior vestibular nerve was located just below the canal for the superior vestibular nerve, and that for the posterior ampullary nerve, the so-called singular canal, ran laterally or posteolateralIy from the posteroinferior aspect of

Maximum likelihood based multi-channel isotropic reverberation reduction for hearing aids

DEFF Research Database (Denmark)

Kuklasiński, Adam; Doclo, Simon; Jensen, Søren Holdt

2014-01-01

We propose a multi-channel Wiener filter for speech dereverberation in hearing aids. The proposed algorithm uses joint maximum likelihood estimation of the speech and late reverberation spectral variances, under the assumption that the late reverberant sound field is cylindrically isotropic....... The dereverberation performance of the algorithm is evaluated using computer simulations with realistic hearing aid microphone signals including head-related effects. The algorithm is shown to work well with signals reverberated both by synthetic and by measured room impulse responses, achieving improvements...

Membrane properties of chick semicircular canal hair cells in situ during embryonic development.

Science.gov (United States)

Masetto, S; Perin, P; Malusà, A; Zucca, G; Valli, P

2000-05-01

The electrophysiological properties of developing vestibular hair cells have been investigated in a chick crista slice preparation, from embryonic day 10 (E10) to E21 (when hatching would occur). Patch-clamp whole-cell experiments showed that different types of ion channels are sequentially expressed during development. An inward Ca(2+) current and a slow outward rectifying K(+) current (I(K(V))) are acquired first, at or before E10, followed by a rapid transient K(+) current (I(K(A))) at E12, and by a small Ca-dependent K(+) current (I(KCa)) at E14. Hair cell maturation then proceeds with the expression of hyperpolarization-activated currents: a slow I(h) appears first, around E16, followed by the fast inward rectifier I(K1) around E19. From the time of its first appearance, I(K(A)) is preferentially expressed in peripheral (zone 1) hair cells, whereas inward rectifying currents are preferentially expressed in intermediate (zone 2) and central (zone 3) hair cells. Each conductance conferred distinctive properties on hair cell voltage response. Starting from E15, some hair cells, preferentially located at the intermediate region, showed the amphora shape typical of type I hair cells. From E17 (a time when the afferent calyx is completed) these cells expressed I(K, L), the signature current of mature type I hair cells. Close to hatching, hair cell complements and regional organization of ion currents appeared similar to those reported for the mature avian crista. By the progressive acquisition of different types of inward and outward rectifying currents, hair cell repolarization after both positive- and negative-current injections is greatly strengthened and speeded up.

Scanning electron microscopy investigation of canal cleaning after canal preparation with nickel titanium files

Directory of Open Access Journals (Sweden)

Živković Slavoljub

2010-01-01

Full Text Available Introduction. Root canal preparation is the most important phase of endodontic procedure and it consists of adequate canal space cleaning and shaping. In recent years, rotary instruments and techniques have gained importance because of the great efficacy, speed and safety of the preparation procedure. Objective. The aim of this research was to investigate the influence of different NiTi files on the canal wall cleaning quality, residual dentine debris and smear layer. Methods. The research was conducted on extracted human teeth in vitro conditions. Teeth were divided in 7 main groups depending on the kind of instruments used for root canal preparation: ProTaper, GT, ProFile, K-3, FlexMaster, hand ProTaper and hand GT. Root canal preparation was accomplished by crown-down technique. Prepared samples were assessed on scanning electron microscopy JEOL, JSM-6460 LV. The evaluation of dentine debris was done with 500x magnification, and the evaluation of smear layer with 1,000 times magnification. Quantitive assessment of dentine debris and smear layer was done according to the criteria of Hulsmann. Results. The least amount of debris and smear layer has been found in canals shaped with ProFile instruments, and the largest amount in canals shaped with FlexMaster instruments. Canal cleaning efficacy of hand GT and ProTaper files has been similar to cleaning efficacy of rotary NiTi files. Statistic analysis has shown a significant difference in amount of dentine debris and smear layer on the canal walls between sample groups shaped with different instruments. Conclusion. Completely clean canals have not been found in any tested group of instruments. The largest amount of debris and smear layer has been found in the apical third of all canals. The design and the type of endodontic instruments influence the efficacy of the canal cleaning.

Investigation of ultra wideband multi-channel dichroic beamsplitters from 0.3 to 52 microns

Science.gov (United States)

Zhang, K. Q.; Hunneman, R.; Seeley, J. S.; Hawkins, G. J.

1990-01-01

The development of a set of multi-channel dichroics which includes a 6 channel dichroic operating over the wavelength region from 0.3 to 52 microns is described. In order to achieve the optimum performance, the optical constraints of PbTe, Ge, and CdTe coatings in the strongly absorptive region have been determined by use of a new iterative method using normal incidence reflectance measurement of the multilayer together with initial values of energy gap and infinite refractive index for the semiconductor model. The design and manufacture of the dichroics is discussed and the final results are presented.

Curved canals: Ancestral files revisited

Directory of Open Access Journals (Sweden)

Jain Nidhi

2008-01-01

Full Text Available The aim of this article is to provide an insight into different techniques of cleaning and shaping of curved root canals with hand instruments. Although a plethora of root canal instruments like ProFile, ProTaper, LightSpeed ® etc dominate the current scenario, the inexpensive conventional root canal hand files such as K-files and flexible files can be used to get optimum results when handled meticulously. Special emphasis has been put on the modifications in biomechanical canal preparation in a variety of curved canal cases. This article compiles a series of clinical cases of root canals with curvatures in the middle and apical third and with S-shaped curvatures that were successfully completed by employing only conventional root canal hand instruments.

Bank erosion of navigation canals in the western and central Gulf of Mexico

Science.gov (United States)

Thatcher, Cindy A.; Hartley, Stephen B.; Wilson, Scott A.

2011-01-01

Erosion of navigation canal banks is a direct cause of land loss, but there has been little quantitative analysis to determine why certain major canals exhibit faster widening rates (indicative of erosion) than others in the coastal zones of Texas, Louisiana, Mississippi, and Alabama. We hypothesize that navigation canals exhibit varying rates of erosion based on soil properties of the embankment substrate, vegetation type, geologic region (derived from digital versions of state geologic maps), and the presence or absence of canal bank armaments (that is, rock rip-rap, concrete bulkheads, or other shoreline protection structures). The first objective of this project was to map the shoreline position and substrate along both banks of the navigation canals, which were digitized from 3 different time periods of aerial photography spanning the years of 1978/79 to 2005/06. The second objective was to quantify the erosion rates of the navigation canals in the study area and to determine whether differences in erosion rates are related to embankment substrate, vegetation type, geologic region, or soil type. To measure changes in shoreline position over time, transects spaced at 50-m (164-ft) intervals were intersected with shorelines from all three time periods, and an annual rate of change was calculated for each transect. Mean annual rates of shoreline change ranged from 1.75 m/year (5.74 ft/year) on the west side of the Atchafalaya River, La., where there was shoreline advancement or canal narrowing, to -3.29 m/year (-10.79 ft/year) on the south side of the Theodore Ship Channel, Ala., where there was shoreline retreat or erosion. Statistical analysis indicated that there were significant differences in shoreline retreat rates according to geologic region and marsh vegetation type, and a weak relationship with soil organic content. This information can be used to better estimate future land loss rates associated with navigation canals and to prioritize the location of

Improved Interference-Free Channel Allocation in Coordinated Multiuser Multi-Antenna Open-Access Small Cells

KAUST Repository

Radaydeh, Redha; Zafar, Ammar; Al-Qahtani, Fawaz; Alouini, Mohamed-Slim

2016-01-01

This paper investigates low-complexity joint interference avoidance and desired link improvement for single channel allocation in multiuser multi-antenna access points (APs) for open-access small cells. It is considered that an active user is equipped with an atenna array that can be used to suppress interference sources but not to provide spatial diversity. On the other hand, the operation of APs can be coordinated to meet design requirements, and each of which can unconditionally utilize assigned physical channels. Moreover, each AP is equipped with uncorrelated antennas that can be reused simultaneously to serve many active users. The analysis provides new approaches to exploit physical channels, transmit antennas, and APs to mitigate interference, while providing the best possible link gain to an active user through the most suitable interference-free channel. The event of concurrent service requests placed by active users on a specific interference-free channel is discussed for either interference avoidance through identifying unshared channels or desired link improvement via multiuser scheduling. The applicability of the approaches to balance downlink loads is explained, and practical scenarios due to imperfect identification of interference-free channels and/or scheduled user are thoroughly investigated. The developed results are applicable for any statistical and geometric models of the allocated channel to an active user as well as channel conditions of interference users. They can be used to study various performance measures. Numerical and simulation results are presented to explain some outcomes of this work.

Improved Interference-Free Channel Allocation in Coordinated Multiuser Multi-Antenna Open-Access Small Cells

KAUST Repository

Radaydeh, Redha

2016-02-16

This paper investigates low-complexity joint interference avoidance and desired link improvement for single channel allocation in multiuser multi-antenna access points (APs) for open-access small cells. It is considered that an active user is equipped with an atenna array that can be used to suppress interference sources but not to provide spatial diversity. On the other hand, the operation of APs can be coordinated to meet design requirements, and each of which can unconditionally utilize assigned physical channels. Moreover, each AP is equipped with uncorrelated antennas that can be reused simultaneously to serve many active users. The analysis provides new approaches to exploit physical channels, transmit antennas, and APs to mitigate interference, while providing the best possible link gain to an active user through the most suitable interference-free channel. The event of concurrent service requests placed by active users on a specific interference-free channel is discussed for either interference avoidance through identifying unshared channels or desired link improvement via multiuser scheduling. The applicability of the approaches to balance downlink loads is explained, and practical scenarios due to imperfect identification of interference-free channels and/or scheduled user are thoroughly investigated. The developed results are applicable for any statistical and geometric models of the allocated channel to an active user as well as channel conditions of interference users. They can be used to study various performance measures. Numerical and simulation results are presented to explain some outcomes of this work.

Selective otolith dysfunctions objectively verified.

Science.gov (United States)

Manzari, Leonardo; MacDougall, Hamish G; Burgess, Ann M; Curthoys, Ian S

2014-01-01

Vertigo and vigorous horizontal spontaneous nystagmus in a presenting patient is usually taken to indicate unilaterally reduced horizontal canal function. However here we report results which question that presumption. In three such patients with an acute vestibular syndrome, complete testing of all peripheral vestibular sense organs using new tests of canal and otolith function (vHIT and VEMPs) showed that semicircular canal function was normal, but that there were unilateral otolithic deficits which probably caused their acute syndrome.

Can rice field channels contribute to biodiversity conservation in Southern Brazilian wetlands?

Directory of Open Access Journals (Sweden)

Leonardo Maltchik

2011-12-01

Full Text Available La conservación de especies en los agroecosistemas ha llamado la atención. Los canales de riego pueden mejorar los hábitats y ofrecer condiciones para la conservación de especies de agua dulce. Desde el punto de vista de conservación de la biodiversidad surgen dos preguntas: 1 ¿Pueden los canales de riego mantener una rica diversidad de vegetación acuática, invertebrados y anfibios en el ciclo de cultivo del arroz? 2 ¿Puede la riqueza, abundancia y composición de especies acuáticas cambiar durante el ciclo de cultivo del arroz? Para ello, en el Condado Mostardas, Brazil un grupo de cuatro canales de los campos de arroz fue seleccionado al azar. En cada canal, se llevaron a cabo seis muestreos durante el ciclo de cultivo del arroz (junio 2005 hasta junio 2006. Un total de 160 táxones fueron identificados en los canales de riego, que incluyen 59 especies de macrófitos, 91 táxones de macroinvertebrados y 10 especies de anfibios. La riqueza y la abundancia de vegetación acuática, invertebrados y anfibios no cambió significativamente durante el ciclo de cultivo del arroz. Sin embargo, la composición de las especies de estos grupos en los canales de riego varía entre períodos no cultivados y cultivados. Nuestros resultados muestran que la diversidad de especies en los canales de riego, junto con la permanencia del agua permite que estas redes acuáticas provocadas por el ser humano puedan funcionar como sistemas importantes que contribuyan con la conservación de la biodiversidad en las regiones donde los humedales se han convertido en campos de arroz. La conservación de las especies en la agricultura, tales como los campos de los canales de arroz, que pueden ser una alternativa importante para la conservación de la biodiversidad en el sur de Brasil, donde más del 90% de los sistemas de humedales ya se han perdido y los restantes aún se encuentran en alto riesgo debido a la expansión de la producción de arroz.Conservation of

Effects of runoff harvesting through semi-circular bund on some soil characteristics

Directory of Open Access Journals (Sweden)

M. Heshmati

2018-04-01

Full Text Available In this study, to investigate the effects of runoff harvesting on soil properties in the semiarid forest, runoff harvesting through semi-circular bund was considered as a method to conserve soil and thereby combat tree mortality. In order to evaluate this hypothesis, runoff was harvested through the semi-circular bund affecting soil quality and moisture storage. The selected forest site is located in Kalehzard, Kermanshah, in Zagros region of western Iran. The experiment was a randomized complete block design with four treatment plots: bund with protection, protection treatment, bund without protection and control treatment. The results showed that the mean values of soil organic carbon in the bund with protection, protection treatment, bund without protection and  control treatment were 2.35, 2.40, 1.90, and 1.80%, respectively, indicating no significant difference among them in the first year, while there were significant (p> 0.05 increases in the bund with protection and protection treatment after three years. Furthermore, coarse and very coarse soil aggregates increased significantly in the bund with protection treatment. This treatment also attributed to significant reduction in soil bulk density from 1.46 (in the first year to 1.32 (in the third year, which enhanced soil moisture content. Finally it was found that bunds with protection significantly curtail dieback and adverse re-growing of stands due to the coupled effects of bund building and protection to curtail forest mortality in the semi-arid regions.

Theoretical study of the influence on surface temperature of a geometrical perturbation of wall of an electrically heated channel (1960); Etude theorique de l'influence, sur la temperature de surface, d'une perturbation geometrique de la paroi d'un canal chauffe electriquement (1960)

Energy Technology Data Exchange (ETDEWEB)

Gerber, R [Commissariat a l' Energie Atomique, Section des Transferts Thermiques, Grenoble (France).Centre d' Etudes Nucleaires; Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

In experiments on forced convection heat transfer in an electrically heated channel, the temperature of the channel face in contact with the fluid is generally calculated from the measured temperature of the isolated face. A process for measuring this temperature leads to the study of the theoretical influence of a local perturbation of the wall thickness on the temperature distribution in this wall. Various problems at the limits, posed by this question of measurement, are dealt with. (author) [French] Dans les experiences de transfert thermique en convection forcee, dans un canal chauffe electriquement, la temperature de la face du canal en contact avec le fluide, est generalement calculee a partir de la temperature mesuree de la face isolee. Un procede de mesure de cette temperature conduit a etudier l'influence theorique d'une perturbation locale de l'epaisseur de la paroi sur la repartition de la temperature dans cette paroi. Divers problemes aux limites, posees par cette question de mesure, sont traites. (auteur)

A Search for universal extra dimensions in the multi-lepton channel from proton anti-proton collisions at √s = 1.8 TeV

Energy Technology Data Exchange (ETDEWEB)

Lin, Chun [Yale Univ., New Haven, CT (United States)

2005-12-01

In this thesis we present the results of a search for Universal Extra Dimensions (UED) with compactification radius near the TeV scale in the multi-lepton channel from proton-antiproton collisions at center-of-mass energy of 1.8 TeV at the Fermi National Accelerator Laboratory. This is the first UED search in the multi-lepton channel performed at the Tevatron.

Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing

OpenAIRE

Hooman Abdolvand; Ghader Faraji; Javad Shahbazi Karami

2017-01-01

Parallel Tubular Channel Angular Pressing (PTCAP) process is a novel recently developed severe plastic deformation (SPD) method for producing ultrafine grained (UFG) and nanograined (NG) tubular specimens with excellent mechanical and physical properties. This process has several advantageous compared to its TCAP counterparts. In this paper, a fine grained AZ91 tube was fabricated via multi pass parallel tubular channel angular pressing (PTCAP) process. Tubes were processed up to three passes...

Study and realization of a multi channel analyzer for a per operator probe

International Nuclear Information System (INIS)

Yahyaoui, Sarra; Brini, Borhen

2006-01-01

The goal of this project is to study and produce a Multi Channel Analyzer (MCA) prototype based on a microcontroller PIC 16F877. This prototype comprises an amplification and a peak detection parts. The microcontroller provide the analog to numeric conversion and ensures the communication with PC. This MCA will be connected to a per operator probe containing a semiconductor detector CdTe. (author). 7 refs

A high-throughput, multi-channel photon-counting detector with picosecond timing

CERN Document Server

Lapington, J S; Miller, G M; Ashton, T J R; Jarron, P; Despeisse, M; Powolny, F; Howorth, J; Milnes, J

2009-01-01

High-throughput photon counting with high time resolution is a niche application area where vacuum tubes can still outperform solid-state devices. Applications in the life sciences utilizing time-resolved spectroscopies, particularly in the growing field of proteomics, will benefit greatly from performance enhancements in event timing and detector throughput. The HiContent project is a collaboration between the University of Leicester Space Research Centre, the Microelectronics Group at CERN, Photek Ltd., and end-users at the Gray Cancer Institute and the University of Manchester. The goal is to develop a detector system specifically designed for optical proteomics, capable of high content (multi-parametric) analysis at high throughput. The HiContent detector system is being developed to exploit this niche market. It combines multi-channel, high time resolution photon counting in a single miniaturized detector system with integrated electronics. The combination of enabling technologies; small pore microchanne...

Satellite rainfall monitoring over Africa for food security, using multi-channel MSG data

Science.gov (United States)

Chadwick, R.; Grimes, D.; Saunders, R.; Blackmore, T.; Francis, P.

2009-04-01

Near real-time rainfall estimates are crucial in sub-Saharan Africa for a variety of humanitarian and agricultural purposes. However, for economic and infrastructural reasons, regularly reporting rain-gauges are sparse and precipitation radar networks extremely rare. Satellite rainfall estimates, particularly from geostationary satellites such as Meteosat Second Generation (MSG), present one method of filling this information gap, as they produce data at high temporal and spatial resolution. An algorithm has been developed to produce rainfall estimates for Africa from multi-channel MSG data. The algorithm is calibrated using precipitation radar data collected in Niamey, Niger as part of the African Monsoon Multidisciplinary Analyses (AMMA) project in 2006, and is based on an algorithm used operationally over Europe by the UK Met Office. Contingency tables are used to establish a statistical relationship between multi-channel MSG data and probability of rainfall at several different rain-rate magnitudes as sensed by the radar. Rain-rate estimates can then be produced at a variety of spatial and temporal scales, with MSG scan length (15 minutes) and pixel size (3-4km) as the lower limit. Results will be presented of a validation of this algorithm over the Sahel region of Africa. Rainfall estimates from this algorithm, processed for 2004, will be validated against gridded rain-gauge data at a 0.5 degree and 10 day timescale suitable for drought monitoring purposes. A comparison will also be made against rainfall estimates from the TAMSAT algorithm, which uses single channel IR data from MSG, and has been shown to perform well in the Sahel region.

Refractory Positional Vertigo With Apogeotropic Horizontal Nystagmus After Labyrinthitis: Surgical Treatment and Identification of Dysmorphic Ampullae.

Science.gov (United States)

Ahmed, Sameer; Heidenreich, Katherine D; McHugh, Jonathan B; Altschuler, Richard A; Carender, Wendy J; Telian, Steven A

2015-09-01

To describe the rationale, intraoperative details, and histopathologic findings discovered when treating an unusual case of apogeotropic horizontal canal positional vertigo with a transmastoid labyrinthectomy. A single case report. Therapeutic. Resolution of apogeotropic nystagmus and improvement of positional vertigo. The apogeotropic variant of horizontal canal positional vertigo can be a difficult entity to treat. This report describes a patient who developed profound sensorineural hearing loss and vertigo after an acute left labyrinthitis. Ten months later, she developed vertigo with apogeotropic positional nystagmus involving the left horizontal semicircular canal. Particle repositioning maneuvers and vestibular physical therapy were unsuccessful. In addition, she developed intermittent positional vertigo affecting the ipsilateral vertical semicircular canals. Given the persistence of her vertigo, multiple canal involvement, and patient preference for definitive treatment, a transmastoid labyrinthectomy was performed. Intraoperatively, the ampulla of the horizontal canal as well as that of the other canals was grossly abnormal as later confirmed on histology. After surgery, her apogeotropic nystagmus and vertigo resolved, and her balance ability gradually improved to a highly functional level. This case illustrates a unique form of positional vertigo that developed and persisted after acute labyrinthitis. Conservative measures were unsuccessful and a transmastoid labyrinthectomy documented dense inflammatory tissue involving all three ampullae. We postulate that the post-labyrinthitic inflammatory changes resulted in mass loading of the membranous ampullae, causing abnormal nystagmus patterns and positional vertigo, which resolved after the labyrinthectomy.

Development of a USB-based multi-channel time division scaler for HL-2A

International Nuclear Information System (INIS)

Liang Ping

2008-01-01

HL-2A is China's first Tokamak device with divertor configuration. Mastering the process and plasma parameter changes with time are of great significance to achieve controlled nuclear fusion. In the recent upgrading of HL-2A, for which a higher and faster electronic equipment was required, we developed a new type USB multi-channel time division scaler for HL-2A including functions: USB interface, PC graphical user interface, simultaneously calibrating more than five channel signals, optional time division spacing 2-50 ms, count rate up to over 2 MHz, accessing all the information 20 s after a activated signal, and processing data and displaying off-line. (authors)

Multi-channel, passive, short-range anti-aircraft defence system

Science.gov (United States)

Gapiński, Daniel; Krzysztofik, Izabela; Koruba, Zbigniew

2018-01-01

The paper presents a novel method for tracking several air targets simultaneously. The developed concept concerns a multi-channel, passive, short-range anti-aircraft defence system based on the programmed selection of air targets and an algorithm of simultaneous synchronisation of several modified optical scanning seekers. The above system is supposed to facilitate simultaneous firing of several self-guided infrared rocket missiles at many different air targets. From the available information, it appears that, currently, there are no passive self-guided seekers that fulfil such tasks. This paper contains theoretical discussions and simulations of simultaneous detection and tracking of many air targets by mutually integrated seekers of several rocket missiles. The results of computer simulation research have been presented in a graphical form.

Multi-channel and porous SiO@N-doped C rods as anodes for high-performance lithium-ion batteries

Science.gov (United States)

Huang, Xiao; Li, Mingqi

2018-05-01

To improve the cycling stability and rate capability of SiO electrodes, multi-channel and porous SiO@N-doped C (mp-SiO@N-doped C) rods are fabricated by the combination of electrospinning and heat treatment with the assistance of poly(methyl methacrylate) (PMMA). During annealing, in-situ PMMA degradation and gasification lead to the formation of multi-channel structure and more pores. As anodes for lithium ion batteries, the mp-SiO@N-doped C rods exhibit excellent cycling stability. At a current density of 400 mA g-1, a discharge capacity of 806 mAh g-1 can be kept after 250 cycles, the retention of which is over than 100% versus the initial reversible capacity. Compared with the SiO@N-doped C rods synthesized without the help of PMMA, the mp-SiO@N-doped C rods exhibit more excellent rate capability. The excellent electrochemical performance is attributed to the special structure of the mp-SiO@N-doped C rods. In addition to the conductivity improved by carbon fibers, the multi-channel and porous structures not only make ions/electrons transfer and electrolyte diffusion easier, but also contribute to the structural stability of the electrodes.

Decreased levels of matrix metalloproteinase-2 in root-canal exudates during root canal treatment.

Science.gov (United States)

Pattamapun, Kassara; Handagoon, Sira; Sastraruji, Thanapat; Gutmann, James L; Pavasant, Prasit; Krisanaprakornkit, Suttichai

2017-10-01

To determine the matrix metalloproteinase-2 (MMP-2) levels in root-canal exudates from teeth undergoing root-canal treatment. The root-canal exudates from six teeth with normal pulp and periradicular tissues that required intentional root canal treatment for prosthodontic reasons and from twelve teeth with pulp necrosis and asymptomatic apical periodontitis (AAP) were sampled with paper points for bacterial culture and aspirated for the detection of proMMP-2 and active MMP-2 by gelatin zymography and the quantification of MMP-2 levels by ELISA. By gelatin zymography, both proMMP-2 and active MMP-2 were detected in the first collection of root-canal exudates from teeth with pulp necrosis and AAP, but not from teeth with normal pulp, and their levels gradually decreased and disappeared at the last collection. Consistently, ELISA demonstrated a significant decrease in MMP-2 levels in the root-canal exudates of teeth with pulp necrosis and AAP following root canal procedures (papical lesions, similar to the clinical application of MMP-8 as a biomarker. Copyright © 2017 Elsevier Ltd. All rights reserved.

Caracterización del canal epitelial de sodio en sinciciotrofoblasto de placenta humana preeclamptica Characterization of the epithelial sodium channel in human pre-eclampsia syncytiotrophoblast

Directory of Open Access Journals (Sweden)

Silvana del Mónaco

2006-02-01

Full Text Available El sinciciotrofoblasto (SCT de placenta humana regula la transferencia de solutos y agua entre la sangre fetal y materna. En el presente trabajo observamos que el canal de sodio ENaC (asociado a cuadros como el síndrome de Liddle y pseudohipoaldosteronismo está presente en la membrana apical del SCT y que la subunidad a del canal tiene una expresión reducida en placentas con hipertensión gestacional (preeclampsia. Realizamos estudios a nivel de expresión de ARN (RT-PCR y a nivel proteico (western blot e inmunohistoquímica. En la línea celular BeWo (modelo de SCT humano el canal se encuentra presente y la expresión del mismo es regulada por las hormonas aldosterona, vasopresina, estradiol y progesterona. Analizamos la actividad del ENaC por electrofisiología y observamos corrientes sensibles a amiloride (10 µM cuando las células BeWo se cultivaron 12 horas con aldosterona (100 nM. Esta corriente presentó una magnitud 20 veces mayor que las corrientes basales, un potencial de reversión cercano a 3 mV y una conductancia de 127 ± 26 pS/pF entre los pulsos de -60 y -140 mV aplicados. Las características de esta corriente son similares a las producidas por ENaC en otros tejidos y evidencian la presencia de un canal funcional. El papel del ENaC en el SCT es poco comprendido, aunque la diferencia de expresión en la preeclampsia podría tener consecuencias para el transporte placentario de agua y iones. Nuestros datos son un aporte para futuros estudios de los mecanismos involucrados en la patofisiología de la preeclampsia.The syncytiotrophoblast (SCT, a multinucleated epithelium forming the outer layer of chorionic villi, acts in human placenta as a transporting barrier regulating the transference of nutrients, solutes and water between maternal and fetal blood. Electrolyte homeostasis and extracellular fluid volume are maintained primarily by regulated Na+ transport. The present study was conducted to analyze the presence of the

Joint image reconstruction method with correlative multi-channel prior for x-ray spectral computed tomography

Science.gov (United States)

Kazantsev, Daniil; Jørgensen, Jakob S.; Andersen, Martin S.; Lionheart, William R. B.; Lee, Peter D.; Withers, Philip J.

2018-06-01

Rapid developments in photon-counting and energy-discriminating detectors have the potential to provide an additional spectral dimension to conventional x-ray grayscale imaging. Reconstructed spectroscopic tomographic data can be used to distinguish individual materials by characteristic absorption peaks. The acquired energy-binned data, however, suffer from low signal-to-noise ratio, acquisition artifacts, and frequently angular undersampled conditions. New regularized iterative reconstruction methods have the potential to produce higher quality images and since energy channels are mutually correlated it can be advantageous to exploit this additional knowledge. In this paper, we propose a novel method which jointly reconstructs all energy channels while imposing a strong structural correlation. The core of the proposed algorithm is to employ a variational framework of parallel level sets to encourage joint smoothing directions. In particular, the method selects reference channels from which to propagate structure in an adaptive and stochastic way while preferring channels with a high data signal-to-noise ratio. The method is compared with current state-of-the-art multi-channel reconstruction techniques including channel-wise total variation and correlative total nuclear variation regularization. Realistic simulation experiments demonstrate the performance improvements achievable by using correlative regularization methods.

Development of slew-rate-limited time-over-threshold (ToT) ASIC for a multi-channel silicon-based ion detector

Science.gov (United States)

Uenomachi, M.; Orita, T.; Shimazoe, K.; Takahashi, H.; Ikeda, H.; Tsujita, K.; Sekiba, D.

2018-01-01

High-resolution Elastic Recoil Detection Analysis (HERDA), which consists of a 90o sector magnetic spectrometer and a position-sensitive detector (PSD), is a method of quantitative hydrogen analysis. In order to increase sensitivity, a HERDA system using a multi-channel silicon-based ion detector has been developed. Here, as a parallel and fast readout circuit from a multi-channel silicon-based ion detector, a slew-rate-limited time-over-threshold (ToT) application-specific integrated circuit (ASIC) was designed, and a new slew-rate-limited ToT method is proposed. The designed ASIC has 48 channels and each channel consists of a preamplifier, a slew-rate-limited shaping amplifier, which makes ToT response linear, and a comparator. The measured equivalent noise charges (ENCs) of the preamplifier, the shaper, and the ToT on no detector capacitance were 253±21, 343±46, and 560±56 electrons RMS, respectively. The spectra from a 241Am source measured using a slew-rate-limited ToT ASIC are also reported.

The interaction between room and musical instruments studied by multi-channel auralization

DEFF Research Database (Denmark)

Rindel, Jens Holger; Otondo, Felipe

2005-01-01

in the anechoic recording. With this technique the variations in sound radiation from the musical instrument during the performance e.g. due to changes in level or movements can be reproduced with the influence of the surrounding room surfaces. Examples include a grand piano and a clarinet.......The directivity of musical instruments is very complicated and typically changes from one tone to the next. So, instead of measuring the average directivity, a multi-channel auralization method has been developed, which allows a highly accurate and realistic sounding auralization of musical...... instruments in rooms. Anechoic recordings have been made with 5 and 13 evenly distributed microphones around the musical instrument. The reproduction is made with a room acoustics simulation software using a compound source, which is in fact a number of highly directive sources, one for each of the channels...

The effects of aging on clinical vestibular evaluations

Directory of Open Access Journals (Sweden)

Maxime eMaheu

2015-09-01

Full Text Available Balance disorders are common issues for aging populations due to the effects of normal aging on peripheral vestibular structures. These changes affect the results of vestibular function evaluations and make the interpretation of these results more difficult. The objective of this article is to review the current state of knowledge of clinically relevant vestibular measures. We will first focus on otolith function assessment methods cVEMP and oVEMP, then the caloric and vHIT methods for semi-circular canals assessment. cVEMP and oVEMP are useful methods, though research on the effects of age for some parameters are still inconclusive. vHIT results are largely independent of age as compared to caloric stimulation and should therefore be preferred for the evaluation of the semi-circular canals function.

Multi-channel Analysis of Passive Surface Waves (MAPS)

Science.gov (United States)

Xia, J.; Cheng, F. Mr; Xu, Z.; Wang, L.; Shen, C.; Liu, R.; Pan, Y.; Mi, B.; Hu, Y.

2017-12-01

Urbanization is an inevitable trend in modernization of human society. In the end of 2013 the Chinese Central Government launched a national urbanization plan—"Three 100 Million People", which aggressively and steadily pushes forward urbanization. Based on the plan, by 2020, approximately 100 million people from rural areas will permanently settle in towns, dwelling conditions of about 100 million people in towns and villages will be improved, and about 100 million people in the central and western China will permanently settle in towns. China's urbanization process will run at the highest speed in the urbanization history of China. Environmentally friendly, non-destructive and non-invasive geophysical assessment method has played an important role in the urbanization process in China. Because human noise and electromagnetic field due to industrial life, geophysical methods already used in urban environments (gravity, magnetics, electricity, seismic) face great challenges. But humanity activity provides an effective source of passive seismic methods. Claerbout pointed out that wavefileds that are received at one point with excitation at the other point can be reconstructed by calculating the cross-correlation of noise records at two surface points. Based on this idea (cross-correlation of two noise records) and the virtual source method, we proposed Multi-channel Analysis of Passive Surface Waves (MAPS). MAPS mainly uses traffic noise recorded with a linear receiver array. Because Multi-channel Analysis of Surface Waves can produces a shear (S) wave velocity model with high resolution in shallow part of the model, MPAS combines acquisition and processing of active source and passive source data in a same flow, which does not require to distinguish them. MAPS is also of ability of real-time quality control of noise recording that is important for near-surface applications in urban environment. The numerical and real-world examples demonstrated that MAPS can be

Integrated Watershed Pollution Control at Wujingang Canal, China

Science.gov (United States)

Zheng, Z.; Yang, X.; Luo, X.

2012-04-01

With a drainage area of 400 square kilometers, Wujingang Canal is located at the economically developed Yangtz Delta of eastern China. As a major tributary, the canal contributes a significant amount of pollutant load to the Lake Tai. Over the past many years, water quality of the canal and its tributaries could not meet the lowest Category V of Chinese surface water quality standard, indicating that its water is not suitable for the purposes of irrigation or scenic views. Major pollution sources in the watershed include industries, residential households, agriculture, fishery, and animal feedlot operations. A comprehensive plan with a budget of 2 billion RMB for the Wujingang watershed pollution control was developed in 2008 and has been implemented progressively ever since. Major components of the plan include: (1) advanced treatment of wastewater from industries and municipal sewage plants for further removal of nitrogen and phosphorous; (2) industrial wastewater reuse; (3) contiguous treatment of sewage from rural residential households with cost-effective technologies such as tower ecofilter system; (4) recycling of rural wastes to generate high-value added products using technologies such as multi-phase anaerobic co-digestion; and (5) making full use of the local landscape and configuring physical, chemical, and biological pollutant treatment structures to build the "clean river network" for treatment of mildly polluted agricultural discharge and surface runoff. Through the implementation of the above measures, water quality of the Wujingang Canal and its tributaries is expected to improve to meet Category IV of Chinese surface water quality standard by 2012, and Category III standard by 2020. Keywords watershed pollution control, non-point source pollution, rural sewage, rural waste, Lake Tai

Development of multi-channel optical-fiber feed through for ITER

International Nuclear Information System (INIS)

Sugie, Tatsuo; Kasai, Satoshi; Toriya, Tomoaki

1998-08-01

A multi-channel fiber feed through has been developed for visible and IR transmission lines through secondary vacuum boundary (cryostat boundary) of ITER. In the first phase, a scale down test-module which has ten fiber feed through in the vacuum flange was manufactured and tested. The vacuum seal was realized by soldering gold plated fibers to a vacuum flange with high temperature solder. The capacity to resist inner pressure rise of 5 atm, the acceleration resistant of 15g and the temperature resistant from 20degC-200degC were achieved by the test module. The connecting loss and the uniformity of transmission losses among each channels of the feed through were not well. Concerning the connecting loss, the best value was 2.2 dB and the worst one was 13.5 dB. In the second phase, the full performance test-module which has 57 fiber feed through was manufactured and tested. The feed through was improved in order to achieve a good transmission and the uniformity among each channels by using a optical fiber implanted in a center of a quartz rod very accurately. The capacity to resist inner pressure rise of 5 atm, the acceleration resistant of 15g and the temperature resistant from 40degC-200degC (Temperature ramp rate: >20degC/hr) were achieved by the full performance test-module. The connecting losses of the feed through were less than 3 dB, and the uniformity of transmission losses among each channels of the feed through was larger than 60%. The requirements for an optical-fiber feed through were almost satisfied with the full performance test-module. Further developments will be necessary for the remote handling method. (author)

Research on optimization design of conformal cooling channels in hot stamping tool based on response surface methodology and multi-objective optimization

Directory of Open Access Journals (Sweden)

He Bin

2016-01-01

Full Text Available In order to optimize the layout of the conformal cooling channels in hot stamping tools, a response surface methodology and multi-objective optimization technique are proposed. By means of an Optimal Latin Hypercube experimental design method, a design matrix with 17 factors and 50 levels is generated. Three kinds of design variables, the radius Rad of the cooling channel, the distance H from the channel center to tool work surface and the ratio rat of each channel center, are optimized to determine the layout of cooling channels. The average temperature and temperature deviation of work surface are used to evaluate the cooling performance of hot stamping tools. On the basis of the experimental design results, quadratic response surface models are established to describe the relationship between the design variables and the evaluation objectives. The error analysis is performed to ensure the accuracy of response surface models. Then the layout of the conformal cooling channels is optimized in accordance with a multi-objective optimization method to find the Pareto optimal frontier which consists of some optimal combinations of design variables that can lead to an acceptable cooling performance.

A multi-channel time-to-digital converter chip for drift chamber readout

International Nuclear Information System (INIS)

Santos, D.M.; Chau, A.; DeBusshere, D.; Dow, S.; Flasck, J.; Levi, M.; Kirsten, F.; Su, E.

1995-12-01

A complete, multi-channel, timing and amplitude measurement IC for use in drift chamber applications is described. By targeting specific resolutions, i.e. 6-bits of resolution for both time and amplitude, area and power can be minimized while achieving the proper level of measurement accuracy. Time is digitized using one eight channel TDC comprised of a delay locked loop and eight sets of latches and encoders. Amplitude (for dE/dx) is digitized using a dual-range FADC for each channel. Eight bits of dynamic range with six bits of accuracy are achieved with the dual-range. The timing and amplitude information is multiplexed into one DRAM (Dynamic Random Access Memory) trigger latency buffer. Interesting events are then transferred into an SRAM (Static Random Access Memory) readout buffer before the latency time has expired. The design has been optimized to achieve the requisite resolution using the smallest area and lowest power. The circuit has been implemented in a 0.8μ triple metal CMOS process. The TDC sub-element has been measured to have better than 135 ps time resolution and 35 ps jitter. The DRAM has a measured cycle time of 80 MHz

Experimental investigation on a semi-circular trough-absorber solar still with baffles for fresh water production

International Nuclear Information System (INIS)

Sathyamurthy, Ravishankar; Nagarajan, P.K.; El-Agouz, S.A.; Jaiganesh, V.; Sathish Khanna, P.

2015-01-01

Highlights: • Experiments are carried out to analyze the performance. • Baffles are placed in the absorber to increase the residence time of water with solar intensity. • Yield of fresh water from present solar still is 16.66% more than a conventional solar still. • Payback period of the present model is quicker. - Abstract: The main objective of this research is to increase the contact time of water in the basin to enhance yield of fresh water by using a semicircular absorber solar still with baffles. An experimental as well as theoretical investigation is carried out. The productivity and efficiency of present still are analyzed with the influence of the number baffles and the water flow rate. A good agreement between the experimental and theoretical results is observed. The results indicate that, the daily yield of present solar still is higher than that for conventional still approximately by 16.66%. The outlet water temperature present solar still is high subsequently, it can be coupled with multi-state of solar stills to increase productivity. Therefore, the present solar still can be sufficiently extended for other continuous solar desalination systems. Economic analysis concluded that, the payback period of the present model solar still is quicker while comparing it with other solar still

Design of canals

CERN Document Server

Swamee, P K

2015-01-01

The book presents firsthand material from the authors on design of hydraulic canals. The book discusses elements of design based on principles of hydraulic flow through canals. It covers optimization of design based on usage requirements and economic constraints. The book includes explicit design equations and design procedures along with design examples for varied cases. With its comprehensive coverage of the principles of hydraulic canal design, this book will prove useful to students, researchers, and practicing engineers. End-of-chapter pedagogical elements make it ideal for use in graduate courses on hydraulic structures offered by most civil engineering departments across the world.

HAI: A novel airborne multi-channel hygrometer for fast multi-phase H2O quantification: Performance of the HAI instrument during the first flights on the German HALO aircraft

Science.gov (United States)

Buchholz, B.; Ebert, V.; Kraemer, M.; Afchine, A.

2014-12-01

Common gas phase H2O measurements on fast airborne platforms e.g. using backward facing or "Rosemount"-inlets can lead to a high risk of ice and droplets contamination. In addition, currently no single hygrometer exists that allows a simultaneous, high-speed measurement of all phases (gas, liquid, ice) with the same detection principle. In the rare occasions multi-phase measurements are realized, gas-and condensed-phase observations rely on different methods, instruments and calibration strategies so that precision and accuracy levels are quite difficult to quantify. This is effectively avoided by the novel TDLAS instrument, HAI, Hygrometer for Atmospheric Investigation, which allows a simultaneous, high speed, multi-phase detection without any sensor calibration in a unique "2+2" channel concept. Hai combines two independent wavelength channels, at 1.4 µm and at 2.6 µm, for a wide dynamic range from 1 to 30 000 ppmv, with a simultaneous closed path (extractive) and open path detection. Thus, "Total", i.e. gas-phase plus condensed-phase water is measured by sampling via a forward facing inlet into "closed-path" extractive cells. A selective, sampling-free, high speed gas phase detection is realized via a dual-wavelength "open-path" cell placed outside of the aircraft fuselage. All channels can be sampled with 120 Hz (measurement cycle time Dt=1.6 ms) allowing an unprecedented spatial resolution of 30 cm at 900 km/h. The evaluation of the individual multi-channel raw-data is done post flight, without any channel interdependencies, in calibration-free mode, thus allowing fast, accurate and precise multi-phase water detection in flight. The performance could be shown in more than 200 net flights hours in three scientific flight campaigns (TACTS, ESMVal, ML-CIRRUS) on the new German HALO aircraft. In addition the level of the accuracy of the calibration free evaluation was evaluated at the German national primary water vapor standard.

Biphasic DC measurement approach for enhanced measurement stability and multi-channel sampling of self-sensing multi-functional structural materials doped with carbon-based additives

Science.gov (United States)

Downey, Austin; D'Alessandro, Antonella; Ubertini, Filippo; Laflamme, Simon; Geiger, Randall

2017-06-01

Investigation of multi-functional carbon-based self-sensing structural materials for structural health monitoring applications is a topic of growing interest. These materials are self-sensing in the sense that they can provide measurable electrical outputs corresponding to physical changes such as strain or induced damage. Nevertheless, the development of an appropriate measurement technique for such materials is yet to be achieved, as many results in the literature suggest that these materials exhibit a drift in their output when measured with direct current (DC) methods. In most of the cases, the electrical output is a resistance and the reported drift is an increase in resistance from the time the measurement starts due to material polarization. Alternating current methods seem more appropriate at eliminating the time drift. However, published results show they are not immune to drift. Moreover, the use of multiple impedance measurement devices (LCR meters) does not allow for the simultaneous multi-channel sampling of multi-sectioned self-sensing materials due to signal crosstalk. The capability to simultaneously monitor multiple sections of self-sensing structural materials is needed to deploy these multi-functional materials for structural health monitoring. Here, a biphasic DC measurement approach with a periodic measure/discharge cycle in the form of a square wave sensing current is used to provide consistent, stable resistance measurements for self-sensing structural materials. DC measurements are made during the measurement region of the square wave while material depolarization is obtained during the discharge region of the periodic signal. The proposed technique is experimentally shown to remove the signal drift in a carbon-based self-sensing cementitious material while providing simultaneous multi-channel measurements of a multi-sectioned self-sensing material. The application of the proposed electrical measurement technique appears promising for real

A Portable Multi-Channel γ Spectrometer Based on Bluetooth and PDA

International Nuclear Information System (INIS)

Yu Xinhua; Lai Wanchang; Zhang Zhen; Chen Xiaoqiang; Wang Guangxi; Yang Qiang

2009-01-01

Introduces an embedded GPS portable multi-channel γ spectrometer based on PDA and blue-tooth. PDA use HP iPAQ rx5700, it has GPS and bluetooth, the position accuracy of GPS isn't more than 5 m and the transmission rate of bluetooth can reach 1 MB/s, its communication distance is up to 10 m. The instrument detection limits of U, Th and K are 1.0 ppm. 1.8 ppm. 0.17%, respectively. The result of experiment proves γ spectrometer based on bluetooth and PDA has low-power, strong anti-interference capability and good portable capability. (authors)

[Treatment of gynecomastia by a combined method of liposuction and semicircular periareolar incision glandular organ partial resection].

Science.gov (United States)

Liu, Su; Kuang, Ruixia; Chen, Zhenyu; Li, Huichao; Zhang, Weina; Wang, Zhiguo; Miao, Yuanxin; Chen, Lu

2008-12-01

To evaluate the effect of the combined method of liposuction and semicircular periareolar incision glandular organ partial resection in the treatment of gynecomastia. From June 2004 to June 2006, 40 patients, aged 11-41 years old, were treated, with no-nodule (n = 10), nodule (n = 22) and female-breast-like with nodules (n = 8). Three patients were unilateral and 37 ones were bilateral. The levels of serum prolactin, luteinizing hormone, follicle stimulating hormone, estradiol, testosterone and cortisol were normal in 38 patients, while in the other 2 patients, the levels of serum prolactin, luteinizing hormone, follicle stimulating hormone and estradiol were higher than normal, and the testosterone level was lower. Liposuction alone was performed in 10 no-nodule patients (lipo-type), and combined liposuction and semicircular periareolar incision glandular organ partial resection were conducted in the other 30 patients (lipo-glandular type). RESULTS; Except for 2 cases in which hematoma and a small amount of effusion were found on the first and second day postoperatively and then obtained healing by first intention right after hematoma removal in time, all the other patients incisions obtained healing by first intention. Nipple numbness occurred in 3 cases on the first day postoperatively and no special treatment was conducted. There was still nipple hypesthesia in these 3 cases after 6-month follow-up. There were no complications such as hematoma, effusion, nipple and mammary areola necrosis, and nipple hypesthesia in other patients. All the 40 patients were followed up for 6-24 months (13 months on average). They were satisfied with their chest figures and no recurrence was observed. The combined method of liposuction and semicircular periareolar incision glandular organ partial resection in the treatment of gynecomastia has many advantages, such as safe, micro-scars, natural and beautiflhl male breast figures as well as high patients' satisfaction.

An evaluation of canal curvature at the apical one third in type II mesial canals of mandibular molars

Directory of Open Access Journals (Sweden)

Hye-Rim Yun

2012-05-01

Full Text Available Objectives The purpose of this study was to evaluate the buccolingual curvature at the apical one third in type II mesial canals of mandibular molars using the radius and angle of curvature. Materials and Methods Total 100 mandibular molars were selected. Following an endodontic access in the teeth, their distal roots were removed. #15 H- or K-files (Dentsply Maillefer were inserted into the mesiobuccal and mesiolingual canals of the teeth. Radiographs of the teeth were taken for the proximal view. Among them, type II canals were selected and divided into two subgroups, IIa and IIb. In type IIa, two separate canals merged into one canal before reaching the apex and in type IIb, two separate canals merged into one canal within the apical foramen. The radius and angle of curvature of specimens were examined. Results In type II, mean radius of curvature in mesiolingual and mesiobuccal canals were 2.82 mm and 3.58 mm, respectively. The radius of the curvature of mesiolingual canals were significantly smaller than that of mesiobuccal canals in type II, and especially in type IIa. However, there were no statistically significant differences in radius of curvature between mesiobuccal and mesiolingual canals in type IIb and there were no significant differences in angle of curvature between type IIa and IIb. Conclusion In this study, type II mesial canals of mandibular molars showed severe curvature in the proximal view. Especially, mesiolingual canals of type IIa had more abrupt curvature than mesiobuccal canals at the apical one third.

Dispositivo de posicionamiento de muestras biológicas para su irradiación en un canal radial de un reactor nuclear // Biological samples positioning device for irradiations on a radial channel at the nuclear research reactor

Directory of Open Access Journals (Sweden)

Maritza Rodríguez - Gual

2010-05-01

Full Text Available ResumenPor la demanda de un dispositivo experimental para el posicionamiento de las muestras biológicaspara su irradiación en un canal radial de un reactor nuclear de investigaciones en funcionamiento, seconstruyó y se puso en marcha un dispositivo para la colocación y retirada de las muestras en laposición de irradiación de dicho canal. Se efectuaron las valoraciones económicas comparando conotro tipo de dispositivo con las mismas funciones. Este trabajo formó parte de un proyectointernacional entre Cuba y Brasil que abarcó el estudio de los daños inducidos por diferentes tipos deradiación ionizante en moléculas de ADN. La solución propuesta es comprobada experimentalmente,lo que demuestra la validez práctica del dispositivo. Como resultado del trabajo, el dispositivoexperimental para la irradiación de las muestras biológicas se encuentra instalado y funcionando yapor 5 años en el canal radial # 3(BH#3 Palabras claves: reactor nuclear de investigaciones, dispositivo para posicionamiento de muestras,___________________________________________________________________________AbstractFor the demand of an experimental device for biological samples positioning system for irradiationson a radial channel at the nuclear research reactor in operation was constructed and started up adevice for the place and remove of the biological samples from the irradiation channels withoutinterrupting the operation of the reactor. The economical valuations are effected comparing withanother type of device with the same functions. This work formed part of an international projectbetween Cuba and Brazil that undertook the study of the induced damages by various types ofionizing radiation in DNA molecules. Was experimentally tested the proposed solution, whichdemonstrates the practical validity of the device. As a result of the work, the experimental device forbiological samples irradiations are installed and operating in the radial beam hole #3(BH#3

Reprocessing of multi-channel seismic-reflection data collected in the Chukchi Sea

Science.gov (United States)

Agena, W.F.; Lee, M.W.; Hart, P.E.

2001-01-01

Contained on this set of two CD-ROMs are stacked and migrated multi-channel seismic-reflection data for 44 lines recorded in the Chukchi Sea, northern Alaska, by the United States Geological Survey in 1977, 1978, and 1980. All data were reprocessed by the USGS in 2000 using updated methods. The resulting final data have both increased temporal and spatial resolution thus providing improved interpretability. An added benefit of these CD-ROMs is that they are a more stable, long-term archival medium for the data.

Osmolarity and root canal antiseptics.

Science.gov (United States)

Rossi-Fedele, G; Guastalli, A R

2014-04-01

Antiseptics used in endodontics for disinfection purposes include root canal dressings and irrigants. Osmotic shock is known to cause the alteration of microbial cell viability and might have a role in the mechanism of action of root canal antiseptics. The aim of this review was to determine the role of osmolarity on the performance of antiseptics in root canal treatment. A literature search using the Medline electronic database was conducted up to 30 May 2013 using the following search terms and combinations: 'osmolarity AND root canal or endodontic or antiseptic or irrigation or irrigant or medication or dressing or biofilm; osmolality AND root canal or endodontic or antiseptic or irrigation or irrigant or medication or dressing or biofilm; osmotic AND root canal or endodontic or antiseptic or irrigation or irrigant or medication or dressing or biofilm; osmosis AND root canal or endodontic or antiseptic or irrigation or irrigant or medication or dressing or biofilm; sodium chloride AND root canal or endodontic or antiseptic or irrigation or irrigant or medication or dressing or biofilm'. Publications were included if the effects of osmolarity on the clinical performance of antiseptics in root canal treatment were stated, if preparations with different osmolarities values were compared and if they were published in English. A hand search of articles published online, 'in press' and 'early view', and in the reference list of the included papers was carried out following the same criteria. A total of 3274 publications were identified using the database, and three were included in the review. The evidence available in endodontics suggests a possible role for hyperosmotic root canal medicaments as disinfectants, and that there is no influence of osmolarity on the tissue dissolution capacity of sodium hypochlorite. There are insufficient data to obtain a sound conclusion regarding the role of hypo-osmosis in root canal disinfection, or osmosis in any further desirable

Vehicular Networking Enhancement And Multi-Channel Routing Optimization, Based on Multi-Objective Metric and Minimum Spanning Tree

Directory of Open Access Journals (Sweden)

Peppino Fazio

2013-01-01

Full Text Available Vehicular Ad hoc NETworks (VANETs represent a particular mobile technology that permits the communication among vehicles, offering security and comfort. Nowadays, distributed mobile wireless computing is becoming a very important communications paradigm, due to its flexibility to adapt to different mobile applications. VANETs are a practical example of data exchanging among real mobile nodes. To enable communications within an ad-hoc network, characterized by continuous node movements, routing protocols are needed to react to frequent changes in network topology. In this paper, the attention is focused mainly on the network layer of VANETs, proposing a novel approach to reduce the interference level during mobile transmission, based on the multi-channel nature of IEEE 802.11p (1609.4 standard. In this work a new routing protocol based on Distance Vector algorithm is presented to reduce the delay end to end and to increase packet delivery ratio (PDR and throughput in VANETs. A new metric is also proposed, based on the maximization of the average Signal-to-Interference Ratio (SIR level and the link duration probability between two VANET nodes. In order to relieve the effects of the co-channel interference perceived by mobile nodes, transmission channels are switched on a basis of a periodical SIR evaluation. A Network Simulator has been used for implementing and testing the proposed idea.

Research on Intelligent Control System of DC SQUID Magnetometer Parameters for Multi-channel System

Science.gov (United States)

Chen, Hua; Yang, Kang; Lu, Li; Kong, Xiangyan; Wang, Hai; Wu, Jun; Wang, Yongliang

2018-03-01

In a multi-channel SQUID measurement system, adjusting device parameters to optimal condition for all channels is time-consuming. In this paper, an intelligent control system is presented to determine the optimal working point of devices which is automatic and more efficient comparing to the manual one. An optimal working point searching algorithm is introduced as the core component of the control system. In this algorithm, the bias voltage V_bias is step scanned to obtain the maximal value of the peak-to-peak current value I_pp of the SQUID magnetometer modulation curve. We choose this point as the optimal one. Using the above control system, more than 30 weakly damped SQUID magnetometers with area of 5 × 5 mm^2 or 10 × 10 mm^2 are adjusted and a 36-channel magnetocardiography system perfectly worked in a magnetically shielded room. The average white flux noise is 15 μΦ_0/Hz^{1/2}.

Path lumping: An efficient algorithm to identify metastable path channels for conformational dynamics of multi-body systems

Science.gov (United States)

Meng, Luming; Sheong, Fu Kit; Zeng, Xiangze; Zhu, Lizhe; Huang, Xuhui

2017-07-01

Constructing Markov state models from large-scale molecular dynamics simulation trajectories is a promising approach to dissect the kinetic mechanisms of complex chemical and biological processes. Combined with transition path theory, Markov state models can be applied to identify all pathways connecting any conformational states of interest. However, the identified pathways can be too complex to comprehend, especially for multi-body processes where numerous parallel pathways with comparable flux probability often coexist. Here, we have developed a path lumping method to group these parallel pathways into metastable path channels for analysis. We define the similarity between two pathways as the intercrossing flux between them and then apply the spectral clustering algorithm to lump these pathways into groups. We demonstrate the power of our method by applying it to two systems: a 2D-potential consisting of four metastable energy channels and the hydrophobic collapse process of two hydrophobic molecules. In both cases, our algorithm successfully reveals the metastable path channels. We expect this path lumping algorithm to be a promising tool for revealing unprecedented insights into the kinetic mechanisms of complex multi-body processes.

[Continuous observation of canal aberrations in S-shaped simulated root canal prepared by hand-used ProTaper files].

Science.gov (United States)

Xia, Ling-yun; Leng, Wei-dong; Mao, Min; Yang, Guo-biao; Xiang, Yong-gang; Chen, Xin-mei

2009-08-01

To observe the formation of canal aberrations in S-shaped root canals prepared by every file of hand-used ProTaper. Fifteen S-shaped simulated resin root canals were selected. Each root canal was prepared by every file of hand-used ProTaper following the manufacturer instruction. The images of canals prepared by S1, S2, F1, F2 and F3 were taken and stored, which were divided into group S1, S2, F1, F2 and F3. One image of canal unprepared was superposed with the images of the same root canal in these five groups respectively to observe the types and number of canal aberrations, which included unprepared area, danger zone, ledge, elbow, zip and perforation. SPSS12.0 software pakage was used for Fisher's exact probabilities in 2x2 table. Unprepared area decreased following preparation by every file of ProTaper, but it still existed when the canal preparation was finished. The incidence of danger zone, elbow and zip in group F1 was 15/15, 11/15, 4/15, respectively, which was significantly higher than that in group S2(2/15,0,0) (PProTaper.The presence of unprepared area suggests that it is essential to rinse canal abundantly during complicated canal preparation and canal antisepsis after preparation.

Multi-Channel Data Recording of Marx switch closures

International Nuclear Information System (INIS)

Lockwood, G.J.; Ruggles, L.E.; Ziska, G.R.

1984-01-01

The authors have measured the optical signals associated with switch closure on the Demon marx at Sandia National Laboratories. Using the High Speed Multi-Channel Data Recorder(HSMCDR), they have recorded the time histories of the optical signals from the thirty switches in the marx generator. All thirty switches were fiber connected to the HSMCDR. The HSMCDR consists of a high speed streak camera, and a microcomputer-based video digitizing system. Since the thirty signals are recorded on a single streak, the time sequence can be determined with great accuracy. The appearance of a given signal can be determined to within two samples of the 256 samples that make up the time streak. The authors have found that the light intensity and time history of any given switch varied over a large range from shot to shot. Thus, the ability to record the entire optical signal as a function of time for each switch on every shot is necessary if accurate timing results are required

Anatomic study on mental canal and incisive nerve canal in interforaminal region in Chinese population.

Science.gov (United States)

Xu, Yun; Suo, Ning; Tian, Xiufen; Li, Fei; Zhong, Guangxin; Liu, Xiaoran; Bao, Yongxing; Song, Tao; Tian, Hua

2015-08-01

This study was aimed to detect the positions of mental canal and incisive nerve canal as well as the prolongation of mandibular canal in interforaminal region in Chinese population to supply the reference data of the surgical safe zone in chin for clinicians. A total of 80 formalin-fixed semi-mandibles of Chinese adult cadavers were dissected, the positions and courses of mental canal and incisive nerve canal as well as the prolongation of mandibular canal in interforaminal region were measured. The mental foramina were present in all cases (100 %), and most of them were located below 2nd premolar (58.75 %). Accessory mental foramina were observed in 5 %. The anterior end of mandibular canal, extending along the course of 7.37 ± 1.10 mm above the lower border of mandible to interforaminal region about 3.54 ± 0.70 mm medial to the mental foramen, most often ended below between the two premolars (73.75 %), where it continued as the incisive nerve canal (100 %) and the mental canal (96.25 %). Mental canal, with the wall formed by compact bone, being 2.60 ± 0.60 mm in diameter and 4.01 ± 1.20 mm in length, opened into mental foramen. Incisive nerve canal, with the wall formed by thin compact bone and/or partly or completely by spongy bone, being 1.76 ± 0.27 mm in diameter and 24.87 ± 2.23 mm in length, extended to the incisor region along the course of 9.53 ± 1.43 mm above the lower border of mandible, and most often ended below the lateral incisor (70.00 %). This research recommended for chin operations in Chinese population: the surgical safe zone could be set in the region about over 4 mm anterior to the mental foramen, and over 12 mm above inferior border of mandible for anterior alveolar surgery, or within 9 mm above inferior border of mandible for genioplasty.

TUKAN—An 8K Pulse Height Analyzer and Multi-Channel Scaler With a PCI or a USB Interface

Science.gov (United States)

Guzik, Z.; Borsuk, S.; Traczyk, K.; Plominski, M.

2006-02-01

In this paper we present two types of 8K-channel analyzers designed for spectroscopy and intensity versus time measurements. The first type (Tukan-8K-PCI) incorporates a PCI interface and is designed to be plugged into a PCI slot of a normal PC. The second type (Tukan-8K-USB) incorporates a USB interface. It is mounted in a separate screened box and can be powered either directly from the USB port or from an external dc source (wall adapter or battery). Each type of device may operate in either of two independent operational modes: Multi Channel Analysis (MCA) and Multi-Channel Scaling (MCS). The most crucial component for the MCA mode-the Peak Detect and Hold circuit-is featuring a novel architecture based on a diamond transistor. Its analog stage can accept analog pulses with rise times as short as 100 ns and has a differential linearity below 1% with sliding scale averaging over the full scale. The functionality includes automatic stop on a programmable count in the Region-Of-Interest (ROI) and on preset live- or real time. The MCS mode works at medium counting rates of up to 8 MHz. The dwell time, the number of channels and single or multi-sweep mode may be preset. Each of these parameters can also be controlled externally via four user configurable logical I/O lines. A single Altera FLEX 10KE30 FPGA provides all control functions and incorporates PCI interface. The USB interface is based on FTDI FIFO controller. Advanced and user-friendly software has been developed for the analyzer

Periapical repair after root canal filling with different root canal sealers.

Science.gov (United States)

Tanomaru-Filho, Mário; Tanomaru, Juliane Maria Guerreiro; Leonardo, Mario Roberto; da Silva, Lea Assed Bezerra

2009-01-01

The aim of this study was to evaluate periapical repair after root canal filling with different endodontic sealers. Sixty-four root canals from dog s teeth were filled, divided into 4 groups (n=16). Root canals were instrumented with K-type files and irrigated with 1% sodium hypochlorite solution. Root canals were filled in the same session by active lateral condensation of the cones and sealers: Intrafill, AH Plus, Roeko Seal and Resilon/Epiphany System. After 90 days, the animals were euthanized and the tissues to be evaluated were processed and stained with hematoxylin and eosin. For histopathological analysis, the following parameters were evaluated: inflammatory process, mineralized tissue resorption, and apical mineralized tissue deposition. Histopathological analysis demonstrated that Intrafill had less favorable results in terms of apical and periapical repair, compared to the other sealers (p0.05). In conclusion, AH Plus and the materials Roeko Seal and Epiphany are good options for clinical use in Endodontics.

A comparative evaluation of the increase in root canal surface area and canal transportation in curved root canals by three rotary systems: A cone-beam computed tomographic study

Science.gov (United States)

Prasanthi, Nalam NVD; Rambabu, Tanikonda; Sajjan, Girija S; Varma, K Madhu; Satish, R Kalyan; Padmaja, M

2016-01-01

Aim: The aim of this study was to measure the increase in root canal surface area and canal transportation after biomechanical preparation at 1, 3, and 5 mm short of the apex with three different rotary systems in both continuous rotary and reciprocating rotary motions. Materials and Methods: Sixty freshly extracted human mandibular molars with mesial root canal curvatures between 20° and 30° were included in the study. Teeth were randomly distributed into three groups (n = 20). Biomechanical preparations were done in all the mesial canals. In Group 1, instrumentation was done with ProTaper universal rotary files, Group 2, with K3XF rotary files, and Group 3, with LSX rotary files. Each group was further subdivided into subgroups A and B (n = 10) where instrumentation was done by continuous rotary and reciprocating rotary techniques, respectively. Increase in root canal surface area and canal transportation was measured using the preoperative and postoperative cone-beam computed tomography scans. Statistical Analysis: The data were analyzed by one-way ANOVA followed by Tukey pairwise multiple comparison tests. Results: Increase in root canal surface area was significantly more (P 0.05) in increase of root canal surface area and canal transportation between continuous rotary and reciprocating rotary techniques for ProTaper Universal, K3XF and LSX groups. Conclusion: LSX rotary system showed minimal increase of root canal surface area and minimal canal transportation when compared to ProTaper and K3XF rotary systems. PMID:27656062

Formation mechanism of channel segregation in carbon steels by inclusion flotation: X-ray microtomography characterization and multi-phase flow modeling

International Nuclear Information System (INIS)

Cao, Yan Fei; Chen, Yun; Li, Dian Zhong

2016-01-01

Recent experimental dissections of steel ingots and multi-scale simulations have led to the discovery of a potential driving force for channel segregation: the flotation of oxide-based inclusion (D. Li et al., Nat. Commun. 5:5572 (2014)). Further experimental analysis and numerical modeling are necessary to clarify this mechanism in detail. In this work, the inclusions in a carbon steel ingot that exhibits severe channel segregations were characterized by the 3D X-ray microtomography, which revealed a significant enrichment and growth of inclusions in the channels. Based on above microtomography characterization, a 2D macrosegregation model encompassing the inclusion flotation was established. In the model, the motions of solid inclusions and liquid were described using the multi-phase flow scheme within the Euler-Lagrange framework. The benchmark simulations showed that sufficient inclusion populations with appropriate sizes are capable of altering the local flow patterns and destabilize the mushy zone, initiating the subsequent channel segregation. The continuous interplay between melt convection, inclusion flotation and solidification eventually causes the formation of macroscale channel. The predicted sizes and volume fraction of inclusions that are able to trigger the channel segregation effectively are consistent with the data obtained via microtomography characterization. The macrosegregation model was then applied to predict the channel segregations in an industrial carbon steel ingot. A rather good agreement of A-segregates was achieved between the simulation and the dissected ingot.

Centralized Routing and Scheduling Using Multi-Channel System Single Transceiver in 802.16d

Science.gov (United States)

Al-Hemyari, A.; Noordin, N. K.; Ng, Chee Kyun; Ismail, A.; Khatun, S.

This paper proposes a cross-layer optimized strategy that reduces the effect of interferences from neighboring nodes within a mesh networks. This cross-layer design relies on the routing information in network layer and the scheduling table in medium access control (MAC) layer. A proposed routing algorithm in network layer is exploited to find the best route for all subscriber stations (SS). Also, a proposed centralized scheduling algorithm in MAC layer is exploited to assign a time slot for each possible node transmission. The cross-layer optimized strategy is using multi-channel single transceiver and single channel single transceiver systems for WiMAX mesh networks (WMNs). Each node in WMN has a transceiver that can be tuned to any available channel for eliminating the secondary interference. Among the considered parameters in the performance analysis are interference from the neighboring nodes, hop count to the base station (BS), number of children per node, slot reuse, load balancing, quality of services (QoS), and node identifier (ID). Results show that the proposed algorithms significantly improve the system performance in terms of length of scheduling, channel utilization ratio (CUR), system throughput, and average end to end transmission delay.

Closed-Loop Neuroprosthesis for Reach-to-Grasp Assistance: Combining Adaptive Multi-channel Neuromuscular Stimulation with a Multi-joint Arm Exoskeleton.

Science.gov (United States)

Grimm, Florian; Gharabaghi, Alireza

2016-01-01

Stroke patients with severe motor deficits cannot execute task-oriented rehabilitation exercises with their affected upper extremity. Advanced rehabilitation technology may support them in performing such reach-to-grasp movements. The challenge is, however, to provide assistance as needed, while maintaining the participants' commitment during the exercises. In this feasibility study, we introduced a closed-loop neuroprosthesis for reach-to-grasp assistance which combines adaptive multi-channel neuromuscular stimulation with a multi-joint arm exoskeleton. Eighteen severely affected chronic stroke patients were assisted by a gravity-compensating, seven-degree-of-freedom exoskeleton which was attached to the paretic arm for performing reach-to-grasp exercises resembling activities of daily living in a virtual environment. During the exercises, adaptive electrical stimulation was applied to seven different muscles of the upper extremity in a performance-dependent way to enhance the task-oriented movement trajectory. The stimulation intensity was individualized for each targeted muscle and remained subthreshold, i.e., induced no overt support. Closed-loop neuromuscular stimulation could be well integrated into the exoskeleton-based training, and increased the task-related range of motion (p = 0.0004) and movement velocity (p = 0.015), while preserving accuracy. The highest relative stimulation intensity was required to facilitate the grasping function. The facilitated range of motion correlated with the upper extremity Fugl-Meyer Assessment score of the patients (p = 0.028). Combining adaptive multi-channel neuromuscular stimulation with antigravity assistance amplifies the residual motor capabilities of severely affected stroke patients during rehabilitation exercises and may thus provide a customized training environment for patient-tailored support while preserving the participants' engagement.

Closed-Loop Neuroprosthesis for Reach-to-Grasp Assistance: Combining Adaptive Multi-channel Neuromuscular Stimulation with a Multi-joint Arm Exoskeleton

Science.gov (United States)

Grimm, Florian; Gharabaghi, Alireza

2016-01-01

Stroke patients with severe motor deficits cannot execute task-oriented rehabilitation exercises with their affected upper extremity. Advanced rehabilitation technology may support them in performing such reach-to-grasp movements. The challenge is, however, to provide assistance as needed, while maintaining the participants' commitment during the exercises. In this feasibility study, we introduced a closed-loop neuroprosthesis for reach-to-grasp assistance which combines adaptive multi-channel neuromuscular stimulation with a multi-joint arm exoskeleton. Eighteen severely affected chronic stroke patients were assisted by a gravity-compensating, seven-degree-of-freedom exoskeleton which was attached to the paretic arm for performing reach-to-grasp exercises resembling activities of daily living in a virtual environment. During the exercises, adaptive electrical stimulation was applied to seven different muscles of the upper extremity in a performance-dependent way to enhance the task-oriented movement trajectory. The stimulation intensity was individualized for each targeted muscle and remained subthreshold, i.e., induced no overt support. Closed-loop neuromuscular stimulation could be well integrated into the exoskeleton-based training, and increased the task-related range of motion (p = 0.0004) and movement velocity (p = 0.015), while preserving accuracy. The highest relative stimulation intensity was required to facilitate the grasping function. The facilitated range of motion correlated with the upper extremity Fugl-Meyer Assessment score of the patients (p = 0.028). Combining adaptive multi-channel neuromuscular stimulation with antigravity assistance amplifies the residual motor capabilities of severely affected stroke patients during rehabilitation exercises and may thus provide a customized training environment for patient-tailored support while preserving the participants' engagement. PMID:27445658

Unpredictable Root Canal Morphology: Expect the Unexpected

Directory of Open Access Journals (Sweden)

Sohez J Makani

2015-01-01

Full Text Available Background: A maxillary first molar with more than four canals is an interesting example of anatomic variations, especially when two of these canals are detected, with separate apical foramen in the distal root. The inability to locate the unexpected canals of various anatomical configuration and subsequently treat them , may lead to therapeutic failures. Endodontic retreatment is usually the modality of choice in such cases. This report describes a case of a maxillary first molar with five canals (two mesial canals in mesial root, two distal canals in two distal roots and a palatal canal in palatal root. Additionally it shows a rare anatomic configuration and emphasizes the importance of identifying additional canals.

Multi-channel logical circuit module used for high-speed, low amplitude signals processing and QDC gate signals generation

International Nuclear Information System (INIS)

Su Hong; Li Xiaogang; Zhu Haidong; Ma Xiaoli; Yin Weiwei; Li Zhuyu; Jin Genming; Wu Heyu

2001-01-01

A new kind of logical circuit will be introduced in brief. There are 16 independent channels in the module. The module receives low amplitude signals(≥40 mV), and processes them to amplify, shape, delay, sum and etc. After the processing each channel produces 2 pairs of ECL logical signal to feed the gate of QDC as the gate signal of QDC. The module consists of high-speed preamplifier unit, high-speed discriminate unit, delaying and shaping unit, summing unit and trigger display unit. The module is developed for 64 CH. 12 BIT Multi-event QDC. The impedance of QDC is 110 Ω. Each gate signal of QDC requires a pair of differential ECL level, Min. Gate width 30 ns and Max. Gate width 1 μs. It has showed that the outputs of logical circuit module satisfy the QDC requirements in experiment. The module can be used on data acquisition system to acquire thousands of data at high-speed ,high-density and multi-parameter, in heavy particle nuclear physics experiment. It also can be used to discriminate multi-coincidence events

Spectrum analysis with indoor multi-channels gamma-rays spectrometer (NaI(Tl))

International Nuclear Information System (INIS)

Hou Shengli; Fan Weihua

2005-01-01

Two calculational methods for analyzing the spectrum which measured by indoor low background multi-channels gamma-rays spectrometer (Na(Tl)) to get the specific activity of 226 Ra, 232 Th and 40 K of the sample are discussed, they are the spectrum analysis method and the characteristic energy peak method (inverse matrix method) respectively. The sample spectrum are analyzed with the program designed according to the two methods, and compared with the results by HPGe gamma-rays spectrometer, showing that the relative deviation is ≤10% with the two methods. (authors)

A novel pathogenic variant c.975G>A (p.Trp325*) in the POU3F4 gene in Yakut family (Eastern Siberia, Russia) with the X-linked deafness-2 (DFNX2).

Science.gov (United States)

Barashkov, Nikolay A; Klarov, Leonid A; Teryutin, Fedor M; Solovyev, Aisen V; Pshennikova, Vera G; Konnikova, Edilia E; Romanov, Georgii P; Tobokhov, Alexander V; Morozov, Igor V; Bondar, Alexander A; Posukh, Olga L; Dzhemileva, Lilya U; Tomsky, Mikhail I; Khusnutdinova, Elza K; Fedorova, Sardana A

2018-01-01

Here, we report a novel hemizygous transition c.975G>A (p.Trp325*) in POU3F4 gene (Xq21) found in two deaf half-brothers from one Yakut family (Eastern Siberia, Russia) with identical inner ear abnormalities ("corkscrew" cochlea with an absence of modiolus) specific to X-linked deafness-2 (DFNX2). Comprehensive clinical evaluation (CT and MR-imaging, audiological and stabilometric examinations) of available members of this family revealed both already known (mixed progressive hearing loss) and additional (enlargement of semicircular canals and postural disorders) clinical DFNX2 features in affected males with c.975G>A (p.Trp325*). Moreover, mild enlargement of semicircular canals, postural abnormalities and different types of hearing thresholds were found in female carrier of this POU3F4-variant. Copyright © 2017 Elsevier B.V. All rights reserved.

Clinical study on unilateral hearing loss in children

International Nuclear Information System (INIS)

Masuda, Sawako; Usui, Satoko

2007-01-01

A series of 60 children was studied (aged 0 to 10 years, 32 boys, 28 girls) with severe unilateral sensorineural hearing loss of unknown etiology. There were two peaks, at 0 and 6 years. In 19 children, hearing loss was identified during a conservative general health checkup for school or preschool children. In 21 children aged 0 years, 16 were suspected of hearing loss by newborn hearing screening. Temporal bone computed tomography scans were examined in 51 patients. Sixteen ears (31.4%) with hearing loss had inner ear and/or internal auditory canal abnormalities. In one patient, the anomaly was the presence of a bony wall dividing the internal auditory canal into two separate compartments associated with severe inner ear hypoplasia. Two patients had a common cavity. In one of these patients, the anomaly was revealed because of severe bacterial meningitis, and another was detected by newborn hearing screening. Six patients had a narrow internal auditory canal, 4 had a narrow internal auditory canal and hypoplastic cochlea, and 1 had a narrow internal auditory canal and cystic vestibule, and lateral semicircular canal dysplasia. Two patients had a cystic vestibule and lateral semicircular canal dysplasia. One case showed fluctuation of the hearing level in the contralateral ear with normal hearing during the observation period at an average of 20 months. The number of children whose unilateral hearing loss is detected early by newborn hearing screening has enormously increased. Strategies for follow-up, early intervention, and support for families are necessary for young children with unilateral hearing impairment. (author)

Applying tracer techniques to NPP liquid effluents for estimating the maximum concentration of soluble pollutants in a man-made canal

International Nuclear Information System (INIS)

Varlam, Carmen; Stefanescu, Ioan; Varlam, Mihai; Raceanu, Mircea; Enache, Adrian; Faurescu, Ionut; Patrascu, Vasile; Bucur, Cristina

2006-01-01

Full text: The possibility of a contamination agent being accidentally or intentionally spilled upstream from a water supply is a constant concern to those diverting and using water from a channel. A method of rapidly estimating the travel-time or dispersion is needed for pollution control or warning system on channels where data are scarce. Travel-time and mixing of water within a stream are basic streamflow characteristics needed in order to predict the rate of movement and dilution of pollutants that could be introduced in the stream. In this study we propose using tritiated liquid effluents from CANDU type nuclear power plant as a tracer, to study hydrodynamics on Danube-Black Sea Canal. This canal is ideal for this kind of study, because wastewater evacuations occur occasionally due to technical operations of nuclear power plant. Tritiated water can be used to simulate the transport and dispersion of solutes in Danube-Black Sea Canal because they have the same physical characteristics as the water. Measured tracer-response curves produced from injection of a known amount of soluble tracer provide an efficient method of obtaining the necessary data. This method can estimate: (1) the rate of movement of a solute through the canal reach: (2) the rate of peak attenuation concentration of a conservative solute in time; and (3) the length of time required for the solute plume to pass a point in the canal. This paper presents the mixing length calculation for particular conditions (lateral branch of the canal, and lateral injection of wastewater from the nuclear power plant). A study of published experimentally-obtained formulas was used to determine proper mixing length. Simultaneous measurements in different locations of the canal confirm the beginning of the experiment. Another result used in a further experiment concerns the tritium level along the Danube-Black Sea Canal. We measured tritium activity concentration in water sampled along the Canal between July

Spectrum-efficient multi-channel design for coexisting IEEE 802.15.4 networks: A stochastic geometry approach

KAUST Repository

Elsawy, Hesham

2014-07-01

For networks with random topologies (e.g., wireless ad-hoc and sensor networks) and dynamically varying channel gains, choosing the long term operating parameters that optimize the network performance metrics is very challenging. In this paper, we use stochastic geometry analysis to develop a novel framework to design spectrum-efficient multi-channel random wireless networks based on the IEEE 802.15.4 standard. The proposed framework maximizes both spatial and time domain frequency utilization under channel gain uncertainties to minimize the number of frequency channels required to accommodate a certain population of coexisting IEEE 802.15.4 networks. The performance metrics are the outage probability and the self admission failure probability. We relax the single channel assumption that has been used traditionally in the stochastic geometry analysis. We show that the intensity of the admitted networks does not increase linearly with the number of channels and the rate of increase of the intensity of the admitted networks decreases with the number of channels. By using graph theory, we obtain the minimum required number of channels to accommodate a certain intensity of coexisting networks under a self admission failure probability constraint. To this end, we design a superframe structure for the coexisting IEEE 802.15.4 networks and a method for time-domain interference alignment. © 2002-2012 IEEE.

The Research of China's Civil Aviation Passenger Multi-Channel Service Technology Platform

Science.gov (United States)

Zhibing, Xue; Xinming, Wang

IATA is promoting Simplifying the Business. The traditional passenger services and business process, such as ticketing, airport counters, had a great influence. The airlines have the passenger service and convenience as the next product development requirements. With civil aviation industry and their company's products construction, the authors propose a solution of passenger multi-channel service product platform. The solution is to streamline the business as the breakthrough point, around the convenience of passengers travel services to travelers as the center, using the current mainstream and the latest IT technology to establish passenger service product platform. The solution will promote DCS e-ticketing business development and service channel diversity. In this paper, the research results have been applied in the product platform construction of the authors' company. The practice shows that through traditional business with the latest IT technologies, traditional passenger services into the emerging service model, passenger service product platform has strong advantages and characteristics. Based on the platform, various types of service products is growing rapidly.

Multi-channel bolometer system on JFT-2M tokamak

International Nuclear Information System (INIS)

Tamai, Hiroshi; Maeno, Masaki; Matsuda, Toshiaki; Matoba, Tohru

1988-07-01

Multi-channel bolometer system is designed and installed to observe the radiation profile on JFT-2M tokamak. Sensor head is made of Thinistor, which is a kind of semiconductor, because it has the advantage of higher sensitivity of about one order of magnitude than the conventional metal foil bolometer and is suitable for the profile measurement in which the signal from the plasma is relatively small. The response and cooling characteristics of the bolometer sensor are suitable for the condition of JFT-2M tokamak plasma. Low noise circuit of bridge and differentiator is developed to optimize the signal to noise ratio in the JFT-2M operating condition. With use of the bolometer system, the radiation profile in joule heating plasma as well as additional heating plasma especially in H-mode plasma is successfully observed. (author)

Imaging of congenital anomalies of the temporal bone.

Science.gov (United States)

Benton, C; Bellet, P S

2000-02-01

This article briefly presents the embryology of the ear and discusses the external auditory canal and middle ear, including first branchial cleft anomalies, external auditory canal atresia and stenoses, congenital cholesteatoma, and congenital teratoma. Topics related to the labyrinths include aplasia, the common-chamber anomaly, the pseudo-Mondini and Mondini malformations, semicircular canal dysplasia, and the large vestibular aqueduct. Vascular malformations and variations also are presented, including the absent and aberrant internal carotid artery, the persistent stapedial artery, and high jugular bulb; cerebrospinal fluid and perilymph fistulas are the subjects of the final section.

Multiple-animal MR imaging using a 3T clinical scanner and multi-channel coil for volumetric analysis in a mouse tumor model

International Nuclear Information System (INIS)

Mitsuda, Minoru; Yamaguchi, Masayuki; Furuta, Toshihiro; Fujii, Hirofumi; Nabetani, Akira; Hirayama, Akira; Nozaki, Atsushi; Niitsu, Mamoru

2011-01-01

Multiple small-animal magnetic resonance (MR) imaging to measure tumor volume may increase the throughput of preclinical cancer research assessing tumor response to novel therapies. We used a clinical scanner and multi-channel coil to evaluate the usefulness of this imaging to assess experimental tumor volume in mice. We performed a phantom study to assess 2-dimensional (2D) geometric distortion using 9-cm spherical and 32-cell (8 x 4 one-cm 2 grids) phantoms using a 3-tesla clinical MR scanner and dedicated multi-channel coil composed of 16 5-cm circular coils. Employing the multi-channel coil, we simultaneously scanned 6 or 8 mice bearing sarcoma 180 tumors. We estimated tumor volume from the sum of the product of tumor area and slice thickness on 2D spin-echo images (repetition time/echo time, 3500/16 ms; in-plane resolution, 0.195 x 0.195 x 1 mm 3 ). After MR acquisition, we excised and weighed tumors, calculated reference tumor volumes from actual tumor weight assuming a density of 1.05 g/cm 3 , and assessed the correlation between the estimated and reference volumes using Pearson's test. Two-dimensional geometric distortion was acceptable below 5% in the 9-cm spherical phantom and in every cell in the 32-cell phantom. We scanned up to 8 mice simultaneously using the multi-channel coil and found 11 tumors larger than 0.1 g in 12 mice. Tumor volumes were 1.04±0.73 estimated by MR imaging and 1.04±0.80 cm 3 by reference volume (average±standard deviation) and highly correlated (correlation coefficient, 0.995; P<0.01, Pearson's test). Use of multiple small-animal MR imaging employing a clinical scanner and multi-channel coil enabled accurate assessment of experimental tumor volume in a large number of mice and may facilitate high throughput monitoring of tumor response to therapy in preclinical research. (author)

A multi-channel time-to-digital converter chip for drift chamber readout

International Nuclear Information System (INIS)

Chau, A.; DeBusschere, D.; Dow, S.F.; Flasck, J.; Levi, M.E.; Kirsten, F.; Su, E.; Santos, D.M.

1996-01-01

A complete, multi-channel, timing and amplitude measurement IC for use in drift chamber applications is described. By targeting specific resolutions, i.e., 6-bits of resolution for both time and amplitude, area and power can be minimized while achieving the proper level of measurement accuracy. Time is digitized using an TDC comprised of a delay locked loop, latch and encoder. Amplitude (for dE/dx) is digitized using a dual-range FADC for each channel. Eight bits of dynamic range with six bits of accuracy are achieved with the dual-range. Eight complete channels of timing and amplitude information are multiplexed into one DRAM (Dynamic Random Access Memory) trigger latency buffer. Interesting events are subsequently transferred into an SRAM (Static Random Access Memory) readout buffer before the latency time has expired. The design has been optimized to achieve the requisite resolution using the smallest area and lowest power. The circuit has been implemented in an 0.8 microm triple metal CMOS process. The measured results indicate that the differential non-linearities of the TDC and the FADC are 200 ps and 10 mV, respectively. The integral nonlinearities of the TDC and the FADC are 230 ps and 9 mV, respectively

SVM-Based Spectral Analysis for Heart Rate from Multi-Channel WPPG Sensor Signals.

Science.gov (United States)

Xiong, Jiping; Cai, Lisang; Wang, Fei; He, Xiaowei

2017-03-03

Although wrist-type photoplethysmographic (hereafter referred to as WPPG) sensor signals can measure heart rate quite conveniently, the subjects' hand movements can cause strong motion artifacts, and then the motion artifacts will heavily contaminate WPPG signals. Hence, it is challenging for us to accurately estimate heart rate from WPPG signals during intense physical activities. The WWPG method has attracted more attention thanks to the popularity of wrist-worn wearable devices. In this paper, a mixed approach called Mix-SVM is proposed, it can use multi-channel WPPG sensor signals and simultaneous acceleration signals to measurement heart rate. Firstly, we combine the principle component analysis and adaptive filter to remove a part of the motion artifacts. Due to the strong relativity between motion artifacts and acceleration signals, the further denoising problem is regarded as a sparse signals reconstruction problem. Then, we use a spectrum subtraction method to eliminate motion artifacts effectively. Finally, the spectral peak corresponding to heart rate is sought by an SVM-based spectral analysis method. Through the public PPG database in the 2015 IEEE Signal Processing Cup, we acquire the experimental results, i.e., the average absolute error was 1.01 beat per minute, and the Pearson correlation was 0.9972. These results also confirm that the proposed Mix-SVM approach has potential for multi-channel WPPG-based heart rate estimation in the presence of intense physical exercise.

Surface Clutter Suppression Techniques Applied to P-band Multi-Channel SAR Ice Sounder Data from East Antarctica

DEFF Research Database (Denmark)

Lin, Chung-Chi; Bekaert, David; Gebert, Nicolas

., Lausanne, developed and built the radiator-elements of the enhanced POLARIS. Several datasets were acquired in the multi-channel configuration during the Feb. 2011 campaign over East Antarctica. The POLARIS instrument will be briefly introduced, followed by an overview of the sounding campaign. Finally...

A Read-out and Data Acquisition System for the Outputs of Multi-channel Spectroscopy Amplifiers

International Nuclear Information System (INIS)

Kong Jie; Qian Yi; Su Hong; Dong Chengfu

2009-01-01

A read-out and data acquisition system for the outputs of multi-channel spectroscopy amplifiers is introduced briefly in this paper. The 16-channel gating integrator/multiplexer developed by us and PXI-DAQ card are used to construct this system. A virtual instrument system for displaying, indicating,measuring and recording of output waveform is accomplished by integrating the PC, hardware, software together flexibly based on the Lab Windows/CVI platform in our read-out and data acquisition system. In this system, an ADC can face the 16 outputs of 16-channel spectroscopy amplifiers, which can improve the system integration and reduce the cost of data acquisition system. The design provided a new way for building the read-out and data acquisition system using the normal modules and spectroscopy amplifiers. This system has been tested and demonstrated that it is intelligent, reliable, real-time and low cost. (authors)

Selecting participants for listening tests of multi-channel reproduced sound

DEFF Research Database (Denmark)

Wickelmaier, Florian; Choisel, Sylvain

2005-01-01

A selection procedure was devised in order to select listeners for experiments in which their main task will be to judge multi-channel reproduced sound. 91 participants filled in a web-based questionnaire. 78 of them took part in an assessment of their hearing thresholds, their spatial hearing......, and their verbal production abilities. The listeners displayed large individual differences in their performance. 40 subjects were selected based on the test results. The self-assessed listening habits and experience in the web questionnaire could not predict the results of the selection procedure. Further......, the hearing thresholds did not correlate with the spatial-hearing test. This leads to the conclusion that task-specific performance tests might be the preferable means of selecting a listening panel....

Parallel post-space preparation in different tooth types ex vivo : deviation from the canal centre and remaining dentine thickness

NARCIS (Netherlands)

Huysmans, M. C. D. N. J. M.; Klein, M. H. J.; Kok, G. F.; Whitworth, J. M.

2007-01-01

Aim To determine the deviation of parallel-sided twist-drills during post-channel preparation and relate this to tooth type and position. Methodology Human teeth with single root canals were selected: maxillary second premolars (group i); maxillary lateral incisors (group ii); mandibular canines

Effects of magnetic field strength in the discharge channel on the performance of a multi-cusped field thruster

Directory of Open Access Journals (Sweden)

Peng Hu

2016-09-01

Full Text Available The performance characteristics of a Multi-cusped Field Thruster depending on the magnetic field strength in the discharge channel were investigated. Four thrusters with different outer diameters of the magnet rings were designed to change the magnetic field strength in the discharge channel. It is found that increasing the magnetic field strength could restrain the radial cross-field electron current and decrease the radial width of main ionization region, which gives rise to the reduction of propellant utilization and thruster performance. The test results in different anode voltage conditions indicate that both the thrust and anode efficiency are higher for the weaker magnetic field in the discharge channel.

Mandibular second premolar with three canals: Re-treatment of a case with unusual root canal anatomy

Directory of Open Access Journals (Sweden)

Niranjan Desai

2011-01-01

Full Text Available A thorough knowledge of root canal anatomy along with the anatomical variations that may be present is essential for success of endodontic therapy. Unusual presentations in the number of the roots or the canals should be expected in every tooth. Mandibular second premolars are thought of as having a single root and canal. Studies have stated that the prevalence of three canals with three orifices in this tooth is 0.4%. The mandibular second premolar is particularly difficult to treat owing to the fact that a wide variation in the number, location and curvature of the roots and canals exist. Added to this is the fact that the access opening is restricted and location of the lingually placed orifices is difficult. This case report details the re-treatment of a mandibular second premolar with three canals and three separate orifices using the surgical microscope.

Salt Plug Formation Caused by Decreased River Discharge in a Multi-channel Estuary

Science.gov (United States)

Shaha, Dinesh Chandra; Cho, Yang-Ki

2016-01-01

Freshwater input to estuaries may be greatly altered by the river barrages required to meet human needs for drinking water and irrigation and prevent salt water intrusion. Prior studies have examined the salt plugs associated with evaporation and salt outwelling from tidal salt flats in single-channel estuaries. In this work, we discovered a new type of salt plug formation in the multi-channel Pasur River Estuary (PRE) caused by decreasing river discharges resulting from an upstream barrage. The formation of a salt plug in response to changes in river discharge was investigated using a conductivity-temperature-depth (CTD) recorder during spring and neap tides in the dry and wet seasons in 2014. An exportation of saline water from the Shibsa River Estuary (SRE) to the PRE through the Chunkhuri Channel occurred during the dry season, and a salt plug was created and persisted from December to June near Chalna in the PRE. A discharge-induced, relatively high water level in the PRE during the wet season exerted hydrostatic pressure towards the SRE from the PRE and thereby prevented the intrusion of salt water from the SRE to the PRE. PMID:27255892

Interrelationships in the Variability of Root Canal Anatomy among the Permanent Teeth: A Full-Mouth Approach by Cone-Beam CT.

Science.gov (United States)

Monsarrat, Paul; Arcaute, Bertrand; Peters, Ove A; Maury, Elisabeth; Telmon, Norbert; Georgelin-Gurgel, Marie; Maret, Delphine

2016-01-01

In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The aim of this study was to assess using CBCT acquisitions regarding whether one root canal anatomy of a tooth is associated with a specific anatomy of another tooth. A total of 106 CBCT acquisitions were obtained using a CBCT scanner with 200μm voxel size. Numbers of roots and canals of the entire dentition were described. Bivariate analyses and logistic regressions were conducted to explore root canal anatomy on one tooth according to age, gender, jaw, side and the others teeth. Multiple correspondence analysis (MCA) was performed to correlate the different numbers of canals profiles. A total of 2424 teeth were analyzed. Independently from the other variables, the presence of an additional root canal on a mandibular incisor increases the risk of having an additional root canal on a mandibular premolar (OR [95%] 3.7 [1.0;13.2]). The mandibular molar variability increases in women compared to men (OR [95%] 0.4 [0.1; 0.9]). MCA showed correspondence between 2-canals maxillary incisor and canines and 5-canals maxillary molars, and some correlation between additional canal on maxillary and mandibular premolars. Although CBCT examinations are conducted in the first intention of making a diagnosis or prognostic evaluation, medium FOV acquisitions could be used as an initial database thus furnishing preliminary evaluations and information. In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The visualization of all canals is considered essential in endodontic therapy. The use of multi-correspondence analysis for statistics in endodontic research is a new approach as a prognostic tool.

Interrelationships in the Variability of Root Canal Anatomy among the Permanent Teeth: A Full-Mouth Approach by Cone-Beam CT.

Directory of Open Access Journals (Sweden)

Paul Monsarrat

Full Text Available In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The aim of this study was to assess using CBCT acquisitions regarding whether one root canal anatomy of a tooth is associated with a specific anatomy of another tooth.A total of 106 CBCT acquisitions were obtained using a CBCT scanner with 200μm voxel size. Numbers of roots and canals of the entire dentition were described. Bivariate analyses and logistic regressions were conducted to explore root canal anatomy on one tooth according to age, gender, jaw, side and the others teeth. Multiple correspondence analysis (MCA was performed to correlate the different numbers of canals profiles.A total of 2424 teeth were analyzed. Independently from the other variables, the presence of an additional root canal on a mandibular incisor increases the risk of having an additional root canal on a mandibular premolar (OR [95%] 3.7 [1.0;13.2]. The mandibular molar variability increases in women compared to men (OR [95%] 0.4 [0.1; 0.9]. MCA showed correspondence between 2-canals maxillary incisor and canines and 5-canals maxillary molars, and some correlation between additional canal on maxillary and mandibular premolars.Although CBCT examinations are conducted in the first intention of making a diagnosis or prognostic evaluation, medium FOV acquisitions could be used as an initial database thus furnishing preliminary evaluations and information. In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The visualization of all canals is considered essential in endodontic therapy. The use of multi-correspondence analysis for statistics in endodontic research is a new approach as a prognostic tool.

The study of thermal tunable coupling between a Superconducting photonic crystal waveguide and semi-circular photonic crystal

Energy Technology Data Exchange (ETDEWEB)

Oskooi, Somayeh; Barvestani, Jamal, E-mail: barvestani@tabrizu.ac.ir

2016-08-15

Highlights: • The light coupling between superconducting photonic crystal waveguide and a semi-circular photonic crystal has been studied. • We utilized the finite difference time domain and plane wave expansion methods in the calculations. • The effect of the size of the nearest neighbor rods of waveguide on the coupling efficiency has been investigated. • The coupling efficiencies are reported versus the temperature of the superconducting waveguide. - Abstract: Through the present study, we investigated the light coupling between superconducting photonic crystal waveguide and a semi-circular photonic crystal. By using the finite difference time domain method, we evaluated the coupling efficiency between the mentioned structures at the various temperatures for different waveguide sizes. Calculation demonstrated that the coupling efficiency strongly depended on the temperature of the superconductor. The peak value of the coupling efficiency was influenced by the size of the nearest neighbor rods of waveguide. The results have shown that it is possible to obtain high efficiency at the desired temperature with proper selection of physical parameters in far-infrared frequency region. This structure has great potential in the optical integration and other areas.

Visualizing multi-channel networks

DEFF Research Database (Denmark)

Antemijczuk, Paweł; Magiera, Marta; Jørgensen, Sune Lehmann

2014-01-01

In this paper, we propose a visualization to illustrate social interactions, built from multiple distinct channels of communication. The visualization displays a summary of dense personal information in a compact graphical notation. The starting point is an abstract drawing of a spider’s web. Below...