WorldWideScience

Sample records for movable shading system

  1. Fatigue Design and Prevention in Movable Scaffolding Systems

    Directory of Open Access Journals (Sweden)

    Coelho Hugo

    2017-06-01

    Full Text Available The Movable Scaffolding System (MSS is a heavy construction equipment used for casting situ of concrete bridge decks. In the past decades, MSSs have become increasingly complex and industrialized, enlarging its span ranges, incorporating auxiliary elevation machinery and increasing productivity. The tendency nowadays is for strong reutilization and the notion of MSS as a disposable or temporary structure is somehow reductive. The main structure of MSSs may be potentially exposed to fatigue, usually characterized by low number of cycles with significant stress amplitude. Fatigue may be prevented through adequate design; judicious selection of materials; demanding quality control and implementation of robust inspection and maintenance plans.

  2. Fatigue Design and Prevention in Movable Scaffolding Systems

    Science.gov (United States)

    Coelho, Hugo; Torres, Alberto; Pacheco, Pedro; Moreira, Cristiano; Silva, Rute; Soares, José M.; Pinto, Dânia

    2017-06-01

    The Movable Scaffolding System (MSS) is a heavy construction equipment used for casting situ of concrete bridge decks. In the past decades, MSSs have become increasingly complex and industrialized, enlarging its span ranges, incorporating auxiliary elevation machinery and increasing productivity. The tendency nowadays is for strong reutilization and the notion of MSS as a disposable or temporary structure is somehow reductive. The main structure of MSSs may be potentially exposed to fatigue, usually characterized by low number of cycles with significant stress amplitude. Fatigue may be prevented through adequate design; judicious selection of materials; demanding quality control and implementation of robust inspection and maintenance plans.

  3. Multilevel power distribution synthesis for a movable flux mapping system

    International Nuclear Information System (INIS)

    Bollacasa, D.; Terney, W.B.; Vincent, G.F.; Dziadosz, D.; Schleicher, T.

    1992-01-01

    A Computer Software package has been developed to support the synthesis of the 3-dimensional power distribution from detector signals from a movable flux mapping system. The power distribution synthesis is based on methodology developed for fixed incore detectors. The full core solution effectively couples all assemblies in the core whether they are instrumented or not. The solution is not subject to approximations for the treatment of assemblies where a measurement cannot be made and provides an accurate representation of axial variations which may be induced by axial blankets, burnable absorber cut back regions and axially zoned flux suppression rods

  4. Entangling movable mirrors in a double cavity system

    DEFF Research Database (Denmark)

    Pinard, Michel; Dantan, Aurelien Romain; Vitali, David

    2005-01-01

    We propose a double-cavity set-up capable of generating a stationary entangled state of two movable mirrors at cryogenic temperatures. The scheme is based on the optimal transfer of squeezing of input optical fields to mechanical vibrational modes of the mirrors, realized by the radiation pressure...... of the intracavity light. We show that the presence of macroscopic entanglement can be demonstrated by an appropriate readout of the output light of the two cavities....

  5. Design and Research of the Movable Hybrid Photovoltaic-Thermal (PVT System

    Directory of Open Access Journals (Sweden)

    Lian Zhang

    2017-04-01

    Full Text Available In recent years, with the development of photovoltaic system and photo-thermal system technology, hybrid photovoltaic-thermal (PVT technology has been a breakthrough in many aspects. This paper describes the movable hybrid PVT system from the aspects of appearance structure, energy flow, and control circuit. The system is equipped with rolling wheels and the simulated light sources also can be removed so that the system can be used in the outdoor conditions. The movable system is also suitable for the PVT system and its related applications without any external power supply. This system combines two technologies: photovoltaic power generation and photo-thermal utilization. The first part of the power supply is for the systems own output power supply, and the second part is for generating thermal energy. The two separate parts can be controlled and monitored respectively through the control circuits and the touch screens. The experimental results show that the system can generate 691 kWh electric energy and 3047.8 kWh thermal energy each year under normal working conditions. The efficiency of the proposed movable hybrid PVT system is calculated to be approximately 42.82% using the revised equations that are proposed in this paper. Therefore, the movable hybrid PVT system can meet the daily demands of hot water and electricity power in remote areas or islands and other non-grid areas. It also can be used to conduct experiment tests for the PVT system.

  6. Development of a three-dimensionally movable phantom system for dosimetric verifications

    International Nuclear Information System (INIS)

    Nakayama, Hiroshi; Mizowaki, Takashi; Narita, Yuichiro; Kawada, Noriyuki; Takahashi, Kunio; Mihara, Kazumasa; Hiraoka, Masahiro

    2008-01-01

    The authors developed a three-dimensionally movable phantom system (3D movable phantom system) which can reproduce three-dimensional movements to experimentally verify the impact of radiotherapy treatment-related movements on dose distribution. The phantom system consists of three integrated components: a three-dimensional driving mechanism (3D driving mechanism), computer control system, and phantoms for film dosimetry. The 3D driving mechanism is a quintessential part of this system. It is composed of three linear-motion tables (single-axis robots) which are joined orthogonally to each other. This mechanism has a motion range of 100 mm, with a maximum velocity of 200 mm/s in each dimension, and 3D motion ability of arbitrary patterns. These attributes are sufficient to reproduce almost all organ movements. The positional accuracy of this 3D movable phantom system in a state of geostationary is less than 0.1 mm. The maximum error in terms of the absolute position on movement was 0.56 mm. The positional reappearance error on movement was up to 0.23 mm. The observed fluctuation of time was 0.012 s in the cycle of 4.5 s of oscillation. These results suggested that the 3D movable phantom system exhibited a sufficient level of accuracy in terms of geometry and timing to reproduce interfractional organ movement or setup errors in order to assess the influence of these errors on high-precision radiotherapy such as stereotactic irradiation and intensity-modulated radiotherapy. In addition, the authors 3D movable phantom system will also be useful in evaluating the adequacy and efficacy of new treatment techniques such as gating or tracking radiotherapy

  7. Conceptual design report for a Fusion Engineering Device sector-handling machine and movable manipulator system

    International Nuclear Information System (INIS)

    Watts, K.D.; Masson, L.S.; McPherson, R.S.

    1982-10-01

    Design requirements, trade studies, design descriptions, conceptual designs, and cost estimates have been completed for the Fusion Engineering Device sector handling machine, movable manipulator system, subcomponent handling machine, and limiter blade handling machine. This information will be used by the Fusion Engineering Design Center to begin to determine the cost and magnitude of the effort required to perform remote maintenance on the Fusion Engineering Device. The designs presented are by no means optimum, and the costs estimates are rough-order-of-magnitude

  8. Development of movable mask system to cope with high beam current

    International Nuclear Information System (INIS)

    Suetsugu, Y.; Shibata, K.; Sanami, T.; Kageyama, T.; Takeuchi, Y.

    2003-01-01

    The KEK B factory (KEKB), a high current electron-positron collider, has a movable mask (or collimator) system to reduce the background noise in the BELLE detector coming from spent particles. The early movable masks, however, had severe problems of heating, arcing, and vacuum leaks over the stored beam current of several hundred mA. The cause is intense trapped higher order modes (HOMs) excited at the mask head, where the cross section of the beam chamber changed drastically. The mask head, made of copper-tungsten alloy or pure copper, was frequently damaged by hitting of the high energy beam at the same time. Since the problems of the mask were revealed, several kinds of improved masks have been designed employing rf technologies in dealing with the HOM and installed to the ring step by step. Much progress has come from adopting a trapped-mode free structure, where the mask was a bent chamber itself. Recently the further improved mask with a reduced HOM design or HOM dampers was developed to suppress the heating of vacuum components near the mask due to the HOM traveling from the mask. To avoid damage to the mask head, on the other hand, a titanium mask head was tried. The latest masks are working as expected now at the stored beam current of 1.5 A. Presented are the problems and experiences on the movable mask system for the KEKB, which are characteristic of and common in a high intensity accelerator

  9. An hourly based performance comparison of an integrated micro-structural perforated shading screen with standard shading systems

    DEFF Research Database (Denmark)

    Appelfeld, David; McNeil, Andrew; Svendsen, Svend

    2012-01-01

    This article evaluates the performance of an integrated micro structural perforated shading screen (MSPSS). Such a system maintains a visual connection with the outdoors while imitating the shading functionality of a venetian blind. Building energy consumption is strongly influenced by the solar...... gains and heat transfer through the transparent parts of the fenestration systems. MSPSS is angular-dependent shading device that provides an effective strategy in the control of daylight, solar gains and overheating through windows. The study focuses on using direct experimental methods to determine bi......-directional transmittance properties of shading systems that are not included as standard shading options in readily available building performance simulation tools. The impact on the indoor environment, particularly temperature and daylight were investigated and compared to three other static complex fenestration systems...

  10. Method and system having ultrasonic sensor movable by translation device for ultrasonic profiling of weld samples

    Science.gov (United States)

    Panyard, James; Potter, Timothy; Charron, William; Hopkins, Deborah; Reverdy, Frederic

    2010-04-06

    A system for ultrasonic profiling of a weld sample includes a carriage movable in opposite first and second directions. An ultrasonic sensor is coupled to the carriage to move over the sample as the carriage moves. An encoder determines the position of the carriage to determine the position of the sensor. A spring is connected at one end of the carriage. Upon the carriage being moved in the first direction toward the spring such that the carriage and the sensor are at a beginning position and the spring is compressed the spring decompresses to push the carriage back along the second direction to move the carriage and the sensor from the beginning position to an ending position. The encoder triggers the sensor to take the ultrasonic measurements of the sample when the sensor is at predetermined positions while the sensor moves over the sample between the beginning and positions.

  11. Building Applications, Opportunities and Challenges of Active Shading Systems: A State-of-the-Art Review

    Directory of Open Access Journals (Sweden)

    Joud Al Dakheel

    2017-10-01

    Full Text Available Active shading systems in buildings have emerged as a high performing shading solution that selectively and optimally controls daylight and heat gains. Active shading systems are increasingly used in buildings, due to their ability to mainly improve the building environment, reduce energy consumption and in some cases generate energy. They may be categorized into three classes: smart glazing, kinetic shading and integrated renewable energy shading. This paper reviews the current status of the different types in terms of design principle and working mechanism of the systems, performance, control strategies and building applications. Challenges, limitations and future opportunities of the systems are then discussed. The review highlights that despite its high initial cost, the electrochromic (EC glazing is the most applied smart glazing due to the extensive use of glass in buildings under all climatic conditions. In terms of external shadings, the rotating shading type is the predominantly used one in buildings due to its low initial cost. Algae façades and folding shading systems are still emerging types, with high initial and maintenance costs and requiring specialist installers. The algae façade systems and PV integrated shading systems are a promising solution due to their dual benefits of providing shading and generating electricity. Active shading systems were found to save 12 to 50% of the building cooling electricity consumption.

  12. Movable Thomson scattering system based on optical fiber (TS-probe)

    International Nuclear Information System (INIS)

    Narihara, K.; Hayashi, H.

    2009-01-01

    This paper proposes a movable compact Thomson scattering (TS) system based on optical fibers (TS-probe). A TS-probe consists of a probe head, optical fiber, a laser-diode, polychromators and lock-in amplifiers. A laser beam optics and light collection optics are mounted rigidly on a probe head with a fixed scattering position. Laser light and scattered light are transmitted by flexible optical fibers, enabling us to move the TS-prove head freely during plasma discharge. The light signal scattered from an amplitude-modulated laser is detected against the plasma light based on the principle of the lock-in amplifier. With a modulated laser power of 300W, the scattered signal from a sheet plasma of 15 mm depth and n e -10 19 m -3 will be measured with 10% accuracy by setting the integrating time to 0.1 s. The TS-probe head is like a 1/20 model of the currently operating LHD-TS. (author)

  13. Partial Shade Evaluation of Distributed Power Electronics for Photovoltaic Systems: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Deline, C.; Meydbrav, J.; Donovan, M.

    2012-06-01

    Site survey data for several residential installations are provided, showing the extent and frequency of shade throughout the year. This background information is used to design a representative shading test that is conducted on two side-by-side 8-kW photovoltaic (PV) installations. One system is equipped with a standard string inverter, while the other is equipped with microinverters on each solar panel. Partial shade is applied to both systems in a comprehensive range of shading conditions, simulating one of three shade extents. Under light shading conditions, the microinverter system produced the equivalent of 4% annual performance improvement, relative to the string inverter system. Under moderate shading conditions, the microinverter system outperformed the string inverter system by 8%, and under heavy shading the microinverter increased relative performance by 12%. In all three cases, the percentage of performance loss that is recovered by the use of distributed power electronics is 40%-50%. Additionally, it was found that certain shading conditions can lead to additional losses in string inverters due to peak-power tracking errors and voltage limitations.

  14. Performance of a daylight-redirecting glass-shading system

    DEFF Research Database (Denmark)

    Appelfeld, David; Svendsen, Svend

    2013-01-01

    to the original system. The visual comfort was evaluated by glare analysis and the redirected daylight did not cause an additional discomfort glare. The higher utilization of daylight can save 20% of the lighting energy. The thermal insulation of the fenestration was maintained, with slightly increased solar......This paper evaluates the daylighting performance of a prototype external dynamic shading and daylight-redirecting system, and the main focus is on the performance simulation. The demonstration project was carried out on a building with an open-plan office. Part of the original façade was replaced...... with the prototype façade. This layout allowed the use of the same orientation and surroundings for both façades. The working plane illuminance was measured over several months and the measurements were accompanied with annual daylight simulations. The prototype system improved the daylighting conditions compared...

  15. Solar Shading System Based on Daylight Directing Glass Lamellas

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Santos, Inês; Svendsen, Svend

    2008-01-01

    The overheating problems in office buildings must be solved with efficient solar shadings in order to reduce the energy demand for cooling and ventilation. At the same time the solar shading should not reduce the daylight level in the building on overcast days because it would result in a lower...

  16. Vegetative and productive aspects of organically grown coffee cultivars under shaded and unshaded systems

    Directory of Open Access Journals (Sweden)

    Marta dos Santos Freire Ricci

    2011-08-01

    Full Text Available Although Coffea arabica species has its origin in the African understories, there is great resistance on the part of the Brazilian producers for growing this species under agroforestry systems as they fear that shading reduces production. This study aimed at evaluating some vegetative traits and the productivity of organically grown coffee (Coffea arabica L. cultivars under shaded and unshaded systems. Twelve treatments consisting of two cultivation systems (shaded and unshaded and six coffee cultivars were arranged in randomized blocks with four replicates, in a split-plot scheme. Shading was provided by banana (Musa sp. and coral bean plants (Erythrinaverna. Shading delayed fruit maturation. Late maturation cultivars, such as the Icatu and the Obatã, matured early in both cultivation systems, while medium and early maturation cultivars presented late maturation. Cultivation in the shaded system increased the leaf area and the number of lower branches, decreased the number of productive nodes per branch, and increased the distance between the nodes and the number of leaves present in the branches. Cultivation in the unshaded system presented greater number of plants with branch blight in relation to plants grown in the shade. The productivity of the cultivars was not different, at 30.0 processed bags per hectare in the shaded system, and 25.8 processed bags per hectare in the unshaded system. The most productive cultivars in the shaded system were the Tupi, the Obatã, and the Catuaí, while no differences between cultivars were obtained in the unshaded system.

  17. Specification for movable manipulator system for use in radiochemical engineering cells

    International Nuclear Information System (INIS)

    Dixson, G.E.

    1998-01-01

    This specification was prepared to identify requirements for a movable manipulator for use in B-Ccl 1 and the REC Airlock at 324 Building. This manipulator could also be used in other hot cells at the 324 Building. This work involves retrieval, inspection, reduction and decontamination of material on the Airlock and Cell floors, in the pipe trench and on the walls. B and W Hanford Company (BWHC) recognizes that not all of the requirements are compatible and some may need to be changed, subject to agreement between the parties involved. BWHC also recognizes that in order to perform the tasks described two or more different machines with significantly different layout may be necessary. These requirements are the starting point for any proposal

  18. Comparison of accuracies of an intraoral spectrophotometer and conventional visual method for shade matching using two shade guide systems.

    Science.gov (United States)

    Parameswaran, Vidhya; Anilkumar, S; Lylajam, S; Rajesh, C; Narayan, Vivek

    2016-01-01

    This in vitro study compared the shade matching abilities of an intraoral spectrophotometer and the conventional visual method using two shade guides. The results of previous investigations between color perceived by human observers and color assessed by instruments have been inconclusive. The objectives were to determine accuracies and interrater agreement of both methods and effectiveness of two shade guides with either method. In the visual method, 10 examiners with normal color vision matched target control shade tabs taken from the two shade guides (VITAPAN Classical™ and VITAPAN 3D Master™) with other full sets of the respective shade guides. Each tab was matched 3 times to determine repeatability of visual examiners. The spectrophotometric shade matching was performed by two independent examiners using an intraoral spectrophotometer (VITA Easyshade™) with five repetitions for each tab. Results revealed that visual method had greater accuracy than the spectrophotometer. The spectrophotometer; however, exhibited significantly better interrater agreement as compared to the visual method. While VITAPAN Classical shade guide was more accurate with the spectrophotometer, VITAPAN 3D Master shade guide proved better with visual method. This in vitro study clearly delineates the advantages and limitations of both methods. There were significant differences between the methods with the visual method producing more accurate results than the spectrophotometric method. The spectrophotometer showed far better interrater agreement scores irrespective of the shade guide used. Even though visual shade matching is subjective, it is not inferior and should not be underrated. Judicious combination of both techniques is imperative to attain a successful and esthetic outcome.

  19. Impact of Manually Controlled Solar Shades on Indoor Visual Comfort

    Directory of Open Access Journals (Sweden)

    Jian Yao

    2016-07-01

    Full Text Available Daylight plays a significant role in sustainable building design. The purpose of this paper was to investigate the impact of manual solar shades on indoor visual comfort. A developed stochastic model for manual solar shades was modeled in Building Controls Virtual Test Bed, which was coupled with EnergyPlus for co-simulation. Movable solar shades were compared with two unshaded windows. Results show that movable solar shades have more than half of the working hours with a comfortable illuminance level, which is about twice higher than low-e windows, with a less significant daylight illuminance fluctuation. For glare protection, movable solar shades increase comfortable visual conditions by about 20% compared to low-e windows. Moreover, the intolerable glare perception could be reduced by more than 20% for movable solar shades.

  20. Heat loads of transparent construction elements and sun shading systems; Waermelasten transparenter Bauteile und Sonnenschutzsysteme

    Energy Technology Data Exchange (ETDEWEB)

    Simmler, H; Binder, B; Vonbank, R

    2000-07-01

    This report for the Swiss Federal Office of Energy (SFOE) describes a test system installed at the Swiss Federal Laboratories for Materials Testing and Research (EMPA) in Duebendorf, Switzerland, for the investigation of heat gain by glazing elements often used in modern architecture and the efficiency of shading elements. The two climatically controlled test cells for the measurement of the thermal characteristics of facade elements and shading systems are described and the results of measurements made using various types of glazing and shading systems - including external and internal lamellas, blinds and extendible fabric sunshades - are presented. The results are analysed and interpreted in a comprehensive appendix.

  1. Colour parameters and shade correspondence of CAD-CAM ceramic systems.

    Science.gov (United States)

    Della Bona, Alvaro; Pecho, Oscar E; Ghinea, Razvan; Cardona, Juan C; Pérez, María M

    2015-06-01

    To evaluate colour differences between (1) CAD-CAM ceramic systems considering shades A1, A2 and A3 and the corresponding nominal shade of VC (Vita Classical shade guide) and (2) shades A1-A2, A2-A3 and A1, A2 and A3 within the same ceramic system. Samples of shades A1, A2 and A3 were fabricated (n=5) from CAD-CAM ceramic blocks (IPS e.max(®) CAD LT and HT, IPS Empress(®) CAD LT and HT, Paradigm™ C, and VITABLOCS(®) Mark II) and polished to 1.0±0.01mm in thickness. Spectral reflectance and colour coordinates were measured using a spectroradiometer inside a viewing booth using the CIE D65 illuminant and the d/0° geometry. Spectral reflectance curves were compared using VAF coefficient and were statistically analyzed using Kruskal-Wallis and the Mann-Whitney U test (α=0.05). Colour coordinates were statistically analyzed using one-way ANOVA, Tukey's test with Bonferroni correction (α=0.001). All colour differences (ΔEab(*) and ΔE00) were analyzed through comparisons with the PT - perceptibility and AT - acceptability thresholds for dental ceramics. ΔE between ceramic systems and its corresponding shade ranged from 6.32 to 13.42 (ΔEab(*)) and 4.48 to 9.30 (ΔE00). ΔE between shades A1-A2, A2-A3 and A1, A2 and A3 ranged, respectively, 1.93-4.82, 1.22-5.59 and 3.63-8.84 (ΔEab(*)); 1.54-3.87, 1.03-3.90 and 2.95-6.51 (ΔE00). Considering the corresponding nominal shade from VC, none of the ceramic systems showed colour differences below the AT. In addition, some ceramic systems showed colour differences below AT (shades A1-A2 and A2-A3) and below PT (shades A2-A3). Careful adjustments should be made to the final shade of CAD-CAM ceramic restorations to reach a clinically acceptable shade match. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Partial Shading Detection in Solar System Using Single Short Pulse of Load

    Directory of Open Access Journals (Sweden)

    Bartczak Mateusz

    2017-03-01

    Full Text Available A single photovoltaic panel under uniform illumination has only one global maximum power point, but the same panel in irregularly illuminated conditions can have more maxima on its power-voltage curve. The irregularly illuminated conditions in most cases are results of partial shading. In the work a single short pulse of load is used to extract information about partial shading. This information can be useful and can help to make some improvements in existing MPPT algorithms. In the paper the intrinsic capacitance of a photovoltaic system is used to retrieve occurrence of partial shading.

  3. A Low Cost Shading Analyzer and Site Evaluator Design to Determine Solar Power System Installation Area

    Directory of Open Access Journals (Sweden)

    Selami Kesler

    2015-01-01

    Full Text Available Shading analyzer systems are necessary for selecting the most suitable installation site to sustain enough solar power. Afterwards, changes in solar data throughout the year must be evaluated along with the identification of obstructions surrounding the installation site in order to analyze shading effects on productivity of the solar power system. In this study, the shading analysis tools are introduced briefly, and a new and different device is developed and explained to analyze shading effect of the environmental obstruction on the site on which the solar power system will be established. Thus, exposure duration of the PV panels to the sunlight can be measured effectively. The device is explained with an application on the installation area selected as a pilot site, Denizli, in Turkey.

  4. Publicity in secured transactions law: Towards a European public notice filing system for non-possessory security rights in movable assets?

    NARCIS (Netherlands)

    Hamwijk, D.J.Y.

    2014-01-01

    There is a growing call to introduce a European public notice filing system for security rights in movable goods comparable to the notice filing system of Art. 9 UCC. A proposal to this effect has been adopted in Book IX DCFR, which represents a comprehensive framework of rules for proprietary

  5. Effect of ceramic thickness and cement shade on the final shade after bonding using the 3D master system: a laboratory study.

    Science.gov (United States)

    Montero, Javier; Gómez-Polo, Cristina

    2016-06-01

    The final color of a ceramic restoration is influenced by both the ceramic thickness and the cement shade. This study aims to evaluate the color stability according to the 3D Master System of e.max ceramic discs after bonding with different shades of luting agents. A total of 120 e.max.Press 2M1 HT ceramic discs (60 discs of 1-mm thick and 60 discs of 0.5 mm thick) and three different values of Variolink Veneer cement were used (-3, 0, +3) for the cementation process. An Easyshade compact device was used to measure color shade tabs, according to the 3D Master System, on the discs both before and after the cementation protocols. Bivariate and multivariate analyses were carried out with the spss v.21. After bonding with the different luting agents, only 30% remained as 2M1: specifically, 22% of the thinner discs and 37.3% of the thicker discs. In general, the effect of bonding increased the value and the chroma of the shade to a significant extent. Regression analyses revealed that the most significant predictor for all color parameters was cement shade, the thinner disc group bonded with -3 cement being the most unstable subgroup. According to the 3D Master System, the shade of the luting agent was the main predictor of the final color. However, the final color seems to be somewhat unpredictable, at least according to the modulating factors evaluated in the present study.

  6. Potential Nitrification and Nitrogen Mineral of Soil in Coffee Agroforestry System with Various Shading Trees

    Directory of Open Access Journals (Sweden)

    Purwanto .

    2007-05-01

    Full Text Available The role of shading trees in coffee farms has been well understood to establish suitable condition for the growth of coffee trees, on the other hand their role in nitrogen cycle in coffee farming is not yet well understood. The objectives of this study are to investigate the influence of various legume shading trees on the concentration of soil mineral N (N-NH4 + and N-NO3-, potential nitrification and to study the controlling factors of nitrification under field conditions. This field explorative research was carried out in Sumberjaya, West Lampung. Twelve observation plots covered four land use systems (LUS, i.e. 1 Coffee agroforestry with Gliricidiasepium as shade trees; 2 Coffee agroforestry with Gliricidiaas shade trees and Arachis pintoias cover crops; 3Coffee agroforestry with Paraserianthes falcataria as shade trees; and 4 Mixed/multistrata coffee agroforestry with Gliricidiaand other fruit crops as shade trees. Measurements of soil mineral-N concentration were carried out every three weeks for three months. Results showed that shade tree species in coffee agroforestry significantly affected concentrations of soil NH4 +, NO3- and potential nitrification. Mixed coffee agroforestry had the highest NH4+/N-mineral ratio (7.16% and the lowest potential nitrification (0.13 mg NO2-kg-1 hour -1 compared to other coffee agroforestry systems using single species of leguminous shade trees. Ratio of NH4 + /N-mineral increased 0.8—21% while potential nitrification decreased 55—79% in mixed coffee agroforestry compared to coffee agroforestry with Gliricidia or P. falcatariaas shade trees. Coffee agroforestry with P. falcatariaas shade trees had potential nitrification 53% lower and ratio of NH4 + /N-mineral concentration 20% higher than that with Gliricidia. Coffee agroforestry with P. falcataria as shade trees also had organic C content 17% higher, total N 40% higher, available P 112% higher than that with Gliricidia. The presence of A. pintoiin

  7. Comparative Analysis of Maximum Power Point Tracking Controllers under Partial Shaded Conditions in a Photovoltaic System

    Directory of Open Access Journals (Sweden)

    R. Ramaprabha

    2015-06-01

    Full Text Available Mismatching effects due to partial shaded conditions are the major drawbacks existing in today’s photovoltaic (PV systems. These mismatch effects are greatly reduced in distributed PV system architecture where each panel is effectively decoupled from its neighboring panel. To obtain the optimal operation of the PV panels, maximum power point tracking (MPPT techniques are used. In partial shaded conditions, detecting the maximum operating point is difficult as the characteristic curves are complex with multiple peaks. In this paper, a neural network control technique is employed for MPPT. Detailed analyses were carried out on MPPT controllers in centralized and distributed architecture under partial shaded environments. The efficiency of the MPPT controllers and the effectiveness of the proposed control technique under partial shaded environments was examined using MATLAB software. The results were validated through experimentation.

  8. Performance of integrated systems of automated roller shade systems and daylight responsive dimming systems

    Energy Technology Data Exchange (ETDEWEB)

    Park, Byoung-Chul; Choi, An-Seop; Jeong, Jae-Weon [Department of Architectural Engineering, Sejong University, Kunja-Dong, Kwangjin-Gu, Seoul (Korea, Republic of); Lee, Eleanor S. [Building Technologies Department, Lawrence Berkeley National Laboratory, Berkeley, CA (United States)

    2011-03-15

    Daylight responsive dimming systems have been used in few buildings to date because they require improvements to improve reliability. The key underlying factor contributing to poor performance is the variability of the ratio of the photosensor signal to daylight workplane illuminance in accordance with sun position, sky condition, and fenestration condition. Therefore, this paper describes the integrated systems between automated roller shade systems and daylight responsive dimming systems with an improved closed-loop proportional control algorithm, and the relative performance of the integrated systems and single systems. The concept of the improved closed-loop proportional control algorithm for the integrated systems is to predict the varying correlation of photosensor signal to daylight workplane illuminance according to roller shade height and sky conditions for improvement of the system accuracy. In this study, the performance of the integrated systems with two improved closed-loop proportional control algorithms was compared with that of the current (modified) closed-loop proportional control algorithm. In the results, the average maintenance percentage and the average discrepancies of the target illuminance, as well as the average time under 90% of target illuminance for the integrated systems significantly improved in comparison with the current closed-loop proportional control algorithm for daylight responsive dimming systems as a single system. (author)

  9. Increased light-use efficiency sustains net primary productivity of shaded coffee plants in agroforestry system.

    Science.gov (United States)

    Charbonnier, Fabien; Roupsard, Olivier; le Maire, Guerric; Guillemot, Joannès; Casanoves, Fernando; Lacointe, André; Vaast, Philippe; Allinne, Clémentine; Audebert, Louise; Cambou, Aurélie; Clément-Vidal, Anne; Defrenet, Elsa; Duursma, Remko A; Jarri, Laura; Jourdan, Christophe; Khac, Emmanuelle; Leandro, Patricia; Medlyn, Belinda E; Saint-André, Laurent; Thaler, Philippe; Van Den Meersche, Karel; Barquero Aguilar, Alejandra; Lehner, Peter; Dreyer, Erwin

    2017-08-01

    In agroforestry systems, shade trees strongly affect the physiology of the undergrown crop. However, a major paradigm is that the reduction in absorbed photosynthetically active radiation is, to a certain extent, compensated by an increase in light-use efficiency, thereby reducing the difference in net primary productivity between shaded and non-shaded plants. Due to the large spatial heterogeneity in agroforestry systems and the lack of appropriate tools, the combined effects of such variables have seldom been analysed, even though they may help understand physiological processes underlying yield dynamics. In this study, we monitored net primary productivity, during two years, on scales ranging from individual coffee plants to the entire plot. Absorbed radiation was mapped with a 3D model (MAESPA). Light-use efficiency and net assimilation rate were derived for each coffee plant individually. We found that although irradiance was reduced by 60% below crowns of shade trees, coffee light-use efficiency increased by 50%, leaving net primary productivity fairly stable across all shade levels. Variability of aboveground net primary productivity of coffee plants was caused primarily by the age of the plants and by intraspecific competition among them (drivers usually overlooked in the agroforestry literature) rather than by the presence of shade trees. © 2017 John Wiley & Sons Ltd.

  10. Experiences and future plans of movable mask system for the high current collider KEK B-factory

    International Nuclear Information System (INIS)

    Suetsugu, Yusuke; Kageyama, Tatsuya; Takeuchi, Yasunao; Kanazawa, Ken-ichi; Satoh, Kotarou; Sanami, Toshiya; Hirayama, Hideo

    2002-01-01

    The movable mask is a special device for an accelerator that cuts off spent particles near the beam orbit and reduces background of the detector. For the KEKB, an electron/positron collider with two rings, sixteen movable masks had been installed for each ring. The originally designed masks, however, revealed severe troubles of heating, arcing and vacuum leaks at the stored beam currents of several hundreds mA. Several kinds of improved masks had been designed employing RF technologies and were installed to the ring step by step. The latest masks are working well except for the grooves on the mask head. Here the problems of movable masks so far are summarized and the structures of the latest movable masks and their status are presented. (author)

  11. Performance of a daylight redirecting glass shading system demonstration in an office building

    DEFF Research Database (Denmark)

    Appelfeld, David; Svendsen, Svend; Traberg-Borup, Steen

    2011-01-01

    This paper evaluates the daylighting performance of a prototype external dynamic integrated shading and light redirecting system. The demonstration project was carried out on a building with an open-plan office. The prototype and original façades were placed on the same floor with the same...... orientation and similar surroundings. The existing façade was used as the reference for measurements and simulations. The focus of this research project was to employ available simulation tools for the system performance evaluation. This was accompanied by measurements of the daylight conditions...... in the investigated space. The prototype system improved daylighting conditions compared to the existing shading system....

  12. Evaluation of accuracy of shade selection using two spectrophotometer systems: Vita Easyshade and Degudent Shadepilot.

    Science.gov (United States)

    Kalantari, Mohammad Hassan; Ghoraishian, Seyed Ahmad; Mohaghegh, Mina

    2017-01-01

    The aim of this in vitro study was to evaluate the accuracy of shade matching using two spectrophotometric devices. Thirteen patients who require a full coverage restoration for one of their maxillary central incisors were selected while the adjacent central incisor was intact. 3 same frameworks were constructed for each tooth using computer-aided design and computer-aided manufacturing technology. Shade matching was performed using Vita Easyshade spectrophotometer, Shadepilot spectrophotometer, and Vitapan classical shade guide for the first, second, and third crown subsequently. After application, firing, and glazing of the porcelain, the color was evaluated and scored by five inspectors. Both spectrophotometric systems showed significantly better results than visual method ( P spectrophotometers ( P Spectrophotometers are a good substitute for visual color selection methods.

  13. Automatic control of movable detectors

    International Nuclear Information System (INIS)

    Wassel, W.W.; Remley, G.W.

    1980-01-01

    An invention is described, relating to a microprocessor based control system for a plurality of movable detectors, e.g. a nuclear reactor flux mapping system, with new system architecture which increases system availability by preventing faults on any of the detection channels from disabling the remaining channels. The system has, say, four drive trains for a number of detectors. Functional separation is realized by having two channels control their associated two drive trains. Redundancy is provided by having dual channels for operator interface. Communications between the functionally separate channels is accomplished by employing two-ported memories in conjunction with multiple microprocessors. (author)

  14. A simulation-powered approach to ventilation, lighting and shading systems control

    Energy Technology Data Exchange (ETDEWEB)

    Schuss, Matthias; Proeglhoef, Claus; Orehounig, Kristina; Mahdavi, Ardeshir [Department of Building Physics and Building Ecology, Vienna University of Technology (Austria)

    2010-12-15

    This paper reports on ongoing work toward implementing a predictive control approach for buildings systems for ventilation, lighting, and shading. The main objective of this method is the optimized control of multiple devices toward usage of passive cooling and natural lighting. In this way, control options (various opening positions of windows, shades, etc.) are generated and computationally assessed using a combination of option space navigation via genetic algorithms and numeric simulation. (Copyright copyright 2010 Ernst and Sohn Verlag fuer Architektur und technische Wissenschaften GmbH and Co. KG, Berlin)

  15. Theoretical and experimental analysis of daylight performance for various shading systems

    Energy Technology Data Exchange (ETDEWEB)

    Tsangrassoulis, A [Group Building Enviromental Studies, Lab. of Meteorology, Dept. of Applied Physics, Univ. of Athens (Greece); Santamouris, M [Group Building Enviromental Studies, Lab. of Meteorology, Dept. of Applied Physics, Univ. of Athens (Greece); Asimakopoulos, D [Group Building Enviromental Studies, Lab. of Meteorology, Dept. of Applied Physics, Univ. of Athens (Greece)

    1997-12-31

    The daylight coefficient approach is used for the theoretical analysis of various shading systems. Once a set of these coefficients has been calculated, it is very easy to calculate illuminance in the interior of a room under various sky luminance distributions. The present paper examines a method based on daylight coefficients to evaluate daylight in the interior of a room. The method is compared with existing radiosity and ray-tracing methods. The examined method is experimentaly validated using measurements obtained in a PASSYS test-cell equipped with shading devices. (orig.)

  16. Safety Analysis of the Movable Absorber TCDQ in the LHC Beam Dumping System

    CERN Document Server

    Filippini, R

    2009-01-01

    The LHC Beam Dumping System nominally dumps the beam synchronously with the passage of the particle free beam abort gap at the beam dump extraction kickers. In the case of an asynchronous beam dump the TCDQ absorber protects the machine aperture. It is a single sided collimator, positioned close to the beam and it has to follow the beam position and beam size during the energy ramp. This report assesses the different failure scenarios of TCDQ positioning and their likelihood. The failure probability for the two TCDQ systems together is estimated to be 3.6 E-05 (mean value) for one year of LHC operation. This corresponds to a SIL4 safety level, which is considered sufficient. The three dominant failure modes are highlighted. The calculated failure probability refers to scenarios that are generated and developed inside the TCDQ system. Potential failure sources not included are the interaction with external systems: the transmission of the start signal to the PLC from a dedicated timing card and the manual opti...

  17. Application of a movable active vibration control system on a floating raft

    Science.gov (United States)

    Wang, Zhen; Mak, Cheuk Ming

    2018-02-01

    This paper presents a theoretical study of an inertial actuator connected to an accelerometer by a local feedback loop for active vibration control on a floating raft. On the criterion of the minimum power transmission from the vibratory machines to the flexible foundation in the floating raft, the best mounting positions for the inertial actuator on the intermediate mass of the floating raft are investigated. Simulation results indicate that the best mounting positions for the inertial actuator vary with frequency. To control time-varying excitations of vibratory machines on a floating raft effectively, an automatic control system based on real-time measurement of a cost function and automatically searching the best mounting position of the inertial actuator is proposed. To the best of our knowledge, it is the first time that an automatic control system is proposed to move an actuator automatically for controlling a time-varying excitation.

  18. Adaptive Fuzzy Logic based MPPT Control for PV System Under Partial Shading Condition

    OpenAIRE

    Choudhury, Subhashree; Rout, Pravat Kumar

    2016-01-01

    Partial shading causes power loss, hotspots and threatens the reliability of the Photovoltaic generation system. Moreover characteristic curves exhibit multiple peaks. Conventional MPPT techniques under this condition often fail to give optimum MPP. Focusing on the afore mentioned problem an attempt has been made to design an Adaptive Takagi-Sugeno Fuzzy Inference System based Fuzzy Logic Control MPPT.The mathematical model of PV array is simulated using in MATLAB/Simulink environment.Various...

  19. Solar shading how to integrate solar shading in sustainable buildings

    CERN Document Server

    Dolmans, Dick; Dutoo, Gonzague; Hall, Anders; Seppänen, Olli

    2010-01-01

    Solar Shading Guidebook gives a solid background on the physics of solar radiation and its behaviour in window with solar shading systems. Major focus of the Guidebook is on the effect of solar shading in the use of energy for cooling, heating and lighting. The book gives also practical guidance for selection, installation and operation of solar shading as well as future trends in integration of HVAC-systems with solar control.

  20. Autonomous shading and light deflection systems; Autarke Sonnenschutz- und Lichtlenksysteme

    Energy Technology Data Exchange (ETDEWEB)

    Klotz, F.H. [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung Baden-Wuerttemberg (ZSW), Stuttgart (Germany)

    1998-02-01

    The motivations for solar control and daylighting systems at buildings are the reduced use of conventional energy and the improved comfort, for living as well as for working. Light guiding devices can be used in order to obtain daylight still in the deep interior of a building or in order to illuminate special targets. Due to the daily and seasonal changes in the Sun`s position, these devices must be constantly adapted. Using simple and reliable passive thermohydraulic drive technology, many applications for daylighting systems become feasible which were of merely theoretical interest in the past. ZSW has started an initiative for the development of such building-integrated solar systems. This report shows the latest results. (orig.) [Deutsch] Energie- und Umweltaspekte sowie neuere Erkenntnisse der Chronobiologie fordern eine intelligentere und effizientere Architektur und Gebaeudetechnik. Eine zentrale Rolle spielen dabei die transparenten Bauteile (Fenster, Glasfassaden, Atrien, Oberlichter, etc.), da dort der hauptsaechliche Energieaustausch (Waerme, Luft) stattfindet. Eine wirksame Kontrolle dieses Energieflusses - im Kontext der saisonalen und diurnalen Schwankungn der Sonneneinstrahlung - ist der Schluessel zur Reduktion des Gebaeudeenergiebedarfs (Heizung, Kuehlung, Beleuchtung, Lueftung) und der Steigerung des visuellen und thermischen Komforts. Es wurde eine Entwicklungsinitiative fuer passive thermohydraulisch gefuehrte Sonnenschutz- und Lichtlenksysteme gestartet, die durch die Sonne selbst mit Energie versorgt und reguliert werden und damit vollkommen autark sind. Hieraus ergibt sich ein hohes Kostenreduktionspotential fuer den Betrieb solcher Anlagen. Ein Meilenstein dieser Entwicklungen ist der von ZSW fuer die Sonnenlichtlenkung entwickelte erste passive zweiachsig nachgefuehrte Heliostat, welcher bereits seit 16 Monaten stoerungsfrei in Betrieb ist. (orig.)

  1. Improving maximum power point tracking of partially shaded photovoltaic system by using IPSO-BELBIC

    International Nuclear Information System (INIS)

    El-Garhy, M. Abd Al-Alim; Mubarak, R.I.; El-Bably, M.

    2017-01-01

    Solar photovoltaic (PV) arrays in remote applications are often related to the rapid changes in the partial shading pattern. Rapid changes of the partial shading pattern make the tracking of maximum power point (MPP) of the global peak through the local ones too difficult. An essential need to make a fast and efficient algorithm to detect the peaks values which always vary as the sun irradiance changes. This paper presents two algorithms based on the improved particle swarm optimization technique one of them with PID controller (IPSO-PID), and the other one with Brain Emotional Learning Based Intelligent Controller (IPSO-BELBIC). These techniques improve the maximum power point (MPP) tracking capabilities for photovoltaic (PV) system under partial shading circumstances. The main aim of these improved algorithms is to accelerate the velocity of IPSO to reach to (MPP) and increase its efficiency. These algorithms also improve the tracking time under complex irradiance conditions. Based on these conditions, the tracking time of these presented techniques improves to 2 msec, with an efficiency of 100%.

  2. Maximum power point tracking for PV systems under partial shading conditions using current sweeping

    International Nuclear Information System (INIS)

    Tsang, K.M.; Chan, W.L.

    2015-01-01

    Highlights: • A novel approach for tracking the maximum power point of photovoltaic systems. • Able to handle both the uniform insolation and partial shading conditions. • Maximum power point tracking based on current sweeping. - Abstract: Partial shading on photovoltaic (PV) arrays causes multiple peaks on the output power–voltage characteristic curve and local searching technique such as perturb and observe (P&O) method could easily fail in searching for the global maximum. Moreover, existing global searching techniques are still not very satisfactory in terms of speed and implementation complexity. In this paper, a fast global maximum power point (MPPT) tracking method which is using current sweeping for photovoltaic arrays under partial shading conditions is proposed. Unlike conventional approach, the proposed method is current based rather than voltage based. The initial maximum power point will be derived based on a current sweeping test and the maximum power point can be enhanced by a finer local search. The speed of the global search is mainly governed by the apparent time constant of the PV array and the generation of a fast current sweeping test. The fast current sweeping test can easily be realized by a DC/DC boost converter with a very fast current control loop. Experimental results are included to demonstrate the effectiveness of the proposed global searching scheme

  3. Comparative study on growth performance of two shade trees in tea agroforestry system.

    Science.gov (United States)

    Kalita, Rinku Moni; Das, Ashesh Kumar; Nath, Arun Jyoti

    2014-07-01

    An attempt was made to study the stem growth of two native dominant shade tree species in terms of annual girth increment in three dominant girth size categories for two years in tea agroforestry system of Barak Valley, Assam. Fifty two sampling plots of 0.1 ha size were established and all trees exceeding 10 cm girth over bark at breast height (1.37 m) were uniquely identified, tagged, and annually measured for girth increment, using metal tape during December 2010-12. Albizia lebbeck and A. odoratissima were dominant shade tree species registering 82% of appearance of the individuals studied. The girth class was categorized into six different categories where 30-50 cm, 50-70 cm and 70-90 cm were dominating girth classes and selected for increment study. Mean annual girth increment ranged from 1.41 cm in Albizia odoratissima (50-70 cm girth class) to 2.97 cm in Albizia lebbeck (70-90 cm girth class) for the first year and 1.70 cm in Albizia odoratissima (50-70 cm girth class) to 3.09 cm in Albizia lebbeck (70-90 cm girth class) for the second year. Albizia lebbeck exhibited better growth in all prominent girth classes as compared to Albizia odoratissima during the observation period. The two shade tree species showed similar trend of growth in both the years of observation and significant difference in girth increment.

  4. Improving maximum power point tracking of partially shaded photovoltaic system by using IPSO-BELBIC

    Science.gov (United States)

    Al-Alim El-Garhy, M. Abd; Mubarak, R. I.; El-Bably, M.

    2017-08-01

    Solar photovoltaic (PV) arrays in remote applications are often related to the rapid changes in the partial shading pattern. Rapid changes of the partial shading pattern make the tracking of maximum power point (MPP) of the global peak through the local ones too difficult. An essential need to make a fast and efficient algorithm to detect the peaks values which always vary as the sun irradiance changes. This paper presents two algorithms based on the improved particle swarm optimization technique one of them with PID controller (IPSO-PID), and the other one with Brain Emotional Learning Based Intelligent Controller (IPSO-BELBIC). These techniques improve the maximum power point (MPP) tracking capabilities for photovoltaic (PV) system under partial shading circumstances. The main aim of these improved algorithms is to accelerate the velocity of IPSO to reach to (MPP) and increase its efficiency. These algorithms also improve the tracking time under complex irradiance conditions. Based on these conditions, the tracking time of these presented techniques improves to 2 msec, with an efficiency of 100%.

  5. Evaluating Maximum Photovoltaic Integration in District Distribution Systems Considering Optimal Inverter Dispatch and Cloud Shading Conditions

    DEFF Research Database (Denmark)

    Ding, Tao; Kou, Yu; Yang, Yongheng

    2017-01-01

    . However, the intermittency of solar PV energy (e.g., due to passing clouds) may affect the PV generation in the district distribution network. To address this issue, the voltage magnitude constraints under the cloud shading conditions should be taken into account in the optimization model, which can......As photovoltaic (PV) integration increases in distribution systems, to investigate the maximum allowable PV integration capacity for a district distribution system becomes necessary in the planning phase, an optimization model is thus proposed to evaluate the maximum PV integration capacity while...

  6. Effect of shade on Arabica coffee berry disease development: Toward an agroforestry system to reduce disease impact.

    Science.gov (United States)

    Mouen Bedimo, J A; Njiayouom, I; Bieysse, D; Ndoumbè Nkeng, M; Cilas, C; Nottéghem, J L

    2008-12-01

    Coffee berry disease (CBD), caused by Colletotrichum kahawae, is a major constraint for Arabica coffee cultivation in Africa. The disease is specific to green berries and can lead to 60% harvest losses. In Cameroon, mixed cropping systems of coffee with other crops, such as fruit trees, are very widespread agricultural practices. Fruit trees are commonly planted at random on coffee farms, providing a heterogeneous shading pattern for coffee trees growing underneath. Based on a recent study of CBD, it is known that those plants can reduce disease incidence. To assess the specific effect of shade, in situ and in vitro disease development was compared between coffee trees shaded artificially by a net and trees located in full sunlight. In the field, assessments confirmed a reduction in CBD on trees grown under shade compared with those grown in full sunlight. Artificial inoculations in the laboratory showed that shade did not have any effect on the intrinsic susceptibility of coffee berries to CBD. Coffee shading mainly acts on environmental parameters in limiting disease incidence. In addition to reducing yield losses, agroforestry system may also be helpful in reducing chemical control of the disease and in diversifying coffee growers' incomes.

  7. MPPT Schemes for PV System under Normal and Partial Shading Condition: A Review

    Directory of Open Access Journals (Sweden)

    Malik Sameeullah

    2016-08-01

    Full Text Available The photovoltaic system is one of the renewable energy device, which directly converts solar radiation into electricity. The I-V characteristics of PV system are nonlinear in nature and under variable Irradiance and temperature, PV system has a single operating point where the power output is maximum, known as Maximum Power Point (MPP and the point varies on changes in atmospheric conditions and electrical load. Maximum Power Point Tracker (MPPT is used to track MPP of solar PV system for maximum efficiency operation. The various MPPT techniques together with implementation are reported in literature. In order to choose the best technique based upon the requirements, comprehensive and comparative study should be available. The aim of this paper is to present a comprehensive review of various MPPT techniques for uniform insolation and partial shading conditions. Furthermore, the comparison of practically accepted and widely used techniques has been made based on features, such as control strategy, type of circuitry, number of control variables and cost. This review work provides a quick analysis and design help for PV systems. Article History: Received March 14, 2016; Received in revised form June 26th 2016; Accepted July 1st 2016; Available online How to Cite This Article: Sameeullah, M. and Swarup, A. (2016. MPPT Schemes for PV System under Normal and Partial Shading Condition: A Review. Int. Journal of Renewable Energy Development, 5(2, 79-94. http://dx.doi.org/10.14710/ijred.5.2.79-94 

  8. Post-planting treatments and shading effects in a Fraxinus angustifolia Vahl. silvopastoral system

    Directory of Open Access Journals (Sweden)

    Giorgos Klossas

    2013-07-01

    Full Text Available Silvopastoral systems present difficulties in their management due to their complexity. When trees are planted into grasslands, they need protection from livestock to prevent damage from trampling or browsing, especially during early years of establishment. One of the common post-planting protective treatments is the protection of individual trees with shelters. Trees also need protection from competition from herbaceous vegetation. The aim of present study was to evaluate the effects of using different types of tree shelters and of controlling competing herbaceous vegetation on the growth of planted young trees and, to assess the effects of heavy shading on the herbage production and composition. The study was conducted in a Fraxinus angustifolia silvopastoral system of a 2 x 2.5 m spacing plantation in northern Greece. The effects of solid-walled (tubex and handmade by greenhouse nylon and wire mesh tree shelters as well as of herbicide application and mechanical removal of the competing herbaceous vegetation on tree height, height increment and the crown surface area of the trees were tested. The effects of artificial shading (80% on the production of the natural herbaceous vegetation were also investigated. All measurements were recorded three years after plantation. The use of solid wall tubex shelters resulted in higher tree height and higher crown surface area in comparison to the other tested shelters. The solid wall Nylon shelters were more beneficial to the above growth parameters than the wire mesh ones. Both vegetation control treatments proved beneficial to all the growth parameters of Fraxinus angustifolia. The artificially applied heavy shading reduced herbage production by 54% compared to the control. The results indicated that post planting treatments in the Mediterranean droughty conditions are essential for the success of this tree species establishment. Furthermore, the later thinning of the dense spacing is important to

  9. System of diagnosis of generators computer aided integrated into a movable laboratory; Sistema de diagnostico de generadores asistido por computadora integrado a un laboratorio movil

    Energy Technology Data Exchange (ETDEWEB)

    De la Torre Vega, H. Octavio; Escorsa Morales, Oscar; Castaneda Parra, Adelina; Garcia- Colon H, Rodolfo [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Lopez Azamar, Ernesto [Comision Federal de Electricidad (Mexico)

    1999-07-01

    The development of the Movable Laboratory is presented, which will allow to combine and document the knowledge acquired by more than ten years of experience in diagnosis of electrical generators. The development of the project is divided into three main parts: laboratory design, data acquisition system (Datec) and system of diagnosis of generators computer aided (Cadis). [Spanish] Se presenta el desarrollo del Laboratorio Movil, el cual permitira conjuntar y documentar el conocimiento adquirido por mas de diez anos de experiencia en diagnostico de generadores electricos. El desarrollo del proyecto se divide en tres grandes partes: diseno de laboratorio, sistema de adquisicion de datos (Datec) y sistema de diagnostico de generadores asistido por computadora (Cadis).

  10. Experimental Analysis of Cool Traditional Solar Shading Systems for Residential Buildings

    Directory of Open Access Journals (Sweden)

    Anna Laura Pisello

    2015-03-01

    Full Text Available In recent years there has been a growing interest in the development and thermal-energy analysis of passive solutions for reducing building cooling needs and thus improving indoor thermal comfort conditions. In this view, several studies were carried out about cool roofs and cool coatings, producing acknowledged mitigation effects on urban heat island phenomenon. The purpose of this work is to investigate the thermal-energy performance of cool louvers of shutters, usually installed in residential buildings, compared to dark color traditional shading systems. To this aim, two full-scale prototype buildings were continuously monitored under summer conditions and the role of the cool shutter in reducing the overheating of the shading system and the energy requirements for cooling was analyzed. After an in-lab optical analysis of the cool coating, showing a huge solar reflectance increase with respect to the traditional configuration, i.e., by about 75%, field monitoring results showed that the cool shutter is able to decrease the indoor air temperature up to 2 °C under free floating conditions. The corresponding energy saving was about 25%, with even much higher peaks during very hot summer conditions.

  11. Power producing sun shades; Elproducerende solafskaermninger

    Energy Technology Data Exchange (ETDEWEB)

    Johnsen, K.; Soerensen, Henrik; Katic, I.; Schmidt-Petersen, H.; AAroe, D.

    2012-01-15

    Integrating photovoltaics into sun shades takes advantage of the best opportunities to capture and utilize solar energy when the shades are most needed to shield users from solar radiation. The report describes results of a development project for solar shading in the form of broad, horizontal and rotating lamellae with solar cells and an integrated control function that simultaneously is optimized based on energy consumption and thermal and visual indoor climate. The project idea was to meet the needs for effective sun protection in the present office, commercial and public buildings, where glass facades are dominant. The conclusion of the development project is that it rarely would be optimal to integrate solar cells into movable shades. This will normally only be relevant in cases where it is justified by architectural considerations. (LN)

  12. Automatic shading effects on the energetic performance of building systems; Efeito do sombreamento automatico no desempenho de sistemas prediais

    Energy Technology Data Exchange (ETDEWEB)

    Prado, Racine Tadeu Araujo

    1997-12-31

    This thesis develops a theoretic-experimental study dealing with the effects of an automatic shading device on the energetic performance of a dimmable lighting system and a cooling equipment. Some equations related to fenestration optical and thermal properties are rebuilt, while some others are created, under a theoretical approach. In order to collect field data, the energy demand-and other variables - was measured in two distinct stories, with the same fenestration features, of the Test Tower. New data was gathered after adding an automatic shading device to the window of one story. The comparison of the collected data allows the energetic performance evaluation of the shading device. (author) 136 refs., 55 figs., 6 tabs.

  13. Automatic shading effects on the energetic performance of building systems; Efeito do sombreamento automatico no desempenho de sistemas prediais

    Energy Technology Data Exchange (ETDEWEB)

    Prado, Racine Tadeu Araujo

    1996-12-31

    This thesis develops a theoretic-experimental study dealing with the effects of an automatic shading device on the energetic performance of a dimmable lighting system and a cooling equipment. Some equations related to fenestration optical and thermal properties are rebuilt, while some others are created, under a theoretical approach. In order to collect field data, the energy demand-and other variables - was measured in two distinct stories, with the same fenestration features, of the Test Tower. New data was gathered after adding an automatic shading device to the window of one story. The comparison of the collected data allows the energetic performance evaluation of the shading device. (author) 136 refs., 55 figs., 6 tabs.

  14. A new estimation method of irradiance on a partially shaded PV generator in grid-connected photovoltaic systems

    Energy Technology Data Exchange (ETDEWEB)

    Drif, M. [Grupo de Investigacion IDEA, Departamento de Electronica, Escuela Politecnica Superior, Universidad de Jaen, Campus Las Lagunillas, 23071 Jaen (Spain); Centre de Developpement des Energies Renouvelables, BP 62, Route de l' Observatoire, 16340 Bouzareah, Algiers (Algeria); Perez, P.J.; Aguilera, J.; Aguilar, J.D. [Grupo de Investigacion IDEA, Departamento de Electronica, Escuela Politecnica Superior, Universidad de Jaen, Campus Las Lagunillas, 23071 Jaen (Spain)

    2008-09-15

    A new method for estimating the irradiance on a partially shaded photovoltaic generator system is proposed. The basic principle of this method consists of two parts: firstly, an approximation of the obstacles' outline or the local horizon by a set of linear functions. Here, a survey of the surroundings is based on the reading of the topographic coordinates of the only significant points of all the objects surrounding the photovoltaic generator. Secondly, the irradiance on the photovoltaic plane is estimated using an accurate model such as the Perez et al. model and assuming that the shading affects both the direct radiation and a part of the diffuse component (circumsolar component). The aim of this paper is to present the principles of the proposed method and the algorithm used for calculating the irradiance on shaded planes. In addition, the results of the comparison between the simulated and measured values of this method are presented. (author)

  15. Partial improvements in the flavor quality of soybean seeds using intercropping systems with appropriate shading.

    Science.gov (United States)

    Liu, Jiang; Yang, Cai-qiong; Zhang, Qing; Lou, Ying; Wu, Hai-jun; Deng, Jun-cai; Yang, Feng; Yang, Wen-yu

    2016-09-15

    The profiles of isoflavone and fatty acids constitute important quality traits in soybean seeds, for making soy-based functional food products, due to their important contributions to the flavor and nutritional value of these products. In general, the composition of these constituents in raw soybeans is affected by cultivation factors, such as sunlight; however, the relationship of the isoflavone and fatty acid profiles with cultivation factors is not well understood. This study evaluated the isoflavone and fatty acid profiles in soybeans grown under a maize-soybean relay strip intercropping system with different row spacings, and with changes in the photosynthetic active radiation (PAR) transmittance. The effects of PAR on the isoflavone and fatty acid contents were found to be quadratic. Appropriate intercropping shading may reduce the bitterness of soybeans caused by soy aglycone and could improve their fatty acid composition. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Post-planting treatments and shading effects in a Fraxinus angustifolia Vahl. silvopastoral system

    Directory of Open Access Journals (Sweden)

    Giorgos Klossas

    2013-05-01

    Full Text Available Silvopastoral systems present difficulties in their management dueto their complexity. When trees are planted into grasslands, they need protection from livestock to prevent damage from trampling or browsing, especially during early years of establishment. One of the common post-planting protective treatments is the protection of individual trees with shelters. Trees also need protection from competition from herbaceous vegetation. The aim of present study was to evaluate the effects of using different types of tree shelters and of controlling competing herbaceous vegetation on the growth of planted young trees and, to assess the effects of heavy shadingon the herbage production and composition. The study was conducted in a Fraxinus angustifolia silvopastoral system of a 2 x 2.5 m spacing plantation in northern Greece. The effects of solid-walled (tubex and handmade by greenhouse nylon and wire mesh tree shelters as well as of herbicide application and mechanical removal of the competing herbaceous vegetation on tree height, height increment and the crown surface area of the trees were tested. The effects of artificial shading (80% on the production of the natural herbaceous vegetation were also investigated. All measurements were recorded three years after plantation. The use of solid wall tubex shelters resultedin higher tree height and higher crown surface area in comparison tothe other tested shelters. The solid wall Nylon shelters were more beneficial to the above growth parameters than the wire mesh ones. Both vegetation control treatments proved beneficial to all the growth parameters of Fraxinus angustifolia. The artificially applied heavy shading reduced herbage production by 54% compared to the control. The results indicated that post planting treatments in the Mediterranean droughty conditions are essential for the success of this tree species establishment. Furthermore, the later thinning of the dense spacing is important to maintain

  17. Research on the Effects of the Movable Die and its Counter Force on Sheet Hydroforming

    International Nuclear Information System (INIS)

    Zhou, Li X.; Zhang, Shi H.; Wang, Ben X.

    2007-01-01

    An improved Sheet Hydro-forming process was proposed, which was investigated in Institute of Metal Research, Chinese Academy of Sciences. ASAME system and FEM are used to analyze the forming process to explain some results that were found in the experiment. In the simulation, the effect of the movable die on the maximum principal stress is investigated in detail by using the FEM code LS-DYNA. For this case, the movable die changes the distribution of the maximum principal stress. For the sheet hydroforming without the movable die, the principal stress near the shoulder of the movable die arrives to the maximum value when t=0.0033s suddenly. But for the sheet hydroforming with the movable die, the maximum principal stress still lies in the die radius. The principal stress near the shoulder of the movable die is smaller. At the last stage contacting with the die, for the case without the movable die, the maximum principal stress near the shoulder of movable die is larger than that of the sheet hydroforming with the movable die. Moreover, the stress distribution near the shoulder of movable die for the case without the movable die is complicated. It is instable and very easy to occur wrinkling. The movable die delays the maximum thickness strain to the contacting die stage. So the formability of sheet metal can be remarkably improved by adopting the movable die. On a certain extent, the uniform distribution of thickness can be realized by increasing the counterforce of movable die. The minimum thickness reduction moves outside which is very helpful for the uniform thickness distribution. In this paper, two kinds of materials, soft steel and stainless steel, were investigated

  18. Shade tree diversity enhances coffee production and quality in agroforestry systems in the Western Ghats

    NARCIS (Netherlands)

    Nesper, Maike; Kueffer, Christoph; Krishnan, Smitha; Kushalappa, Cheppudira G.; Ghazoul, Jaboury

    2017-01-01

    Intensification of multispecies coffee agroforests reduces shade tree diversity with implications for tropical biodiversity. We investigated how tree biodiversity and its effects on coffee production and quality changes along a gradient of intensification (from diverse multispecies to Grevillea

  19. Surface inspection system for industrial components based on shape from shading minimization approach

    Science.gov (United States)

    Kotan, Muhammed; Öz, Cemil

    2017-12-01

    An inspection system using estimated three-dimensional (3-D) surface characteristics information to detect and classify the faults to increase the quality control on the frequently used industrial components is proposed. Shape from shading (SFS) is one of the basic and classic 3-D shape recovery problems in computer vision. In our application, we developed a system using Frankot and Chellappa SFS method based on the minimization of the selected basis function. First, the specialized image acquisition system captured the images of the component. To eliminate noise, wavelet transform is applied to the taken images. Then, estimated gradients were used to obtain depth and surface profiles. Depth information was used to determine and classify the surface defects. Also, a comparison made with some linearization-based SFS algorithms was discussed. The developed system was applied to real products and the results indicated that using SFS approaches is useful and various types of defects can easily be detected in a short period of time.

  20. Effect of Dental Restorative Material Type and Shade on Characteristics of Two-Layer Dental Composite Systems

    Directory of Open Access Journals (Sweden)

    Atefeh Karimzadeh

    Full Text Available Abstract The purpose of this study was to investigate the effects of shade and material type and shape in dental polymer composites on the hardness and shrinkage stress of bulk and two-layered restoration systems. For this purpose, some bulk and layered specimens from three different shades of dental materials were prepared and light-cured. The experiments were carried out on three types of materials: conventional restorative composite, nanohybrid composite and nanocomposite. Micro-indentation experiment was performed on the bulk and also on each layer of layered restoration specimens using a Vicker's indenter. The interface between the two layers was studied by scanning electron microscopy (SEM. The results revealed significant differences between the values of hardness for different shades in the conventional composite and also in the nanohybrid composite. However, no statistically significant difference was observed between the hardness values for different shades in the nanocomposite samples. The layered restoration specimens of different restorative materials exhibited lower hardness values with respect to their bulk specimens. The reduction in the hardness value of the layered conventional composite samples was higher than those of the nanocomposite and nanohybrid composite specimens indicating more shrinkage stresses generated in the conventional composite restorations. According to the SEM images, a gap was observed between the two layers in the layered restorations.

  1. Solar photovoltaic system design optimization by shading analysis to maximize energy generation from limited urban area

    International Nuclear Information System (INIS)

    Rachchh, Ravi; Kumar, Manoj; Tripathi, Brijesh

    2016-01-01

    Highlights: • Scheme to maximize total number of solar panels in a given area. • Enhanced energy output from a fixed area without compromising the efficiency. • Capacity and generated energy are enhanced by more than 25%. - Abstract: In the urban areas the demand of solar power is increasing due to better awareness about the emission of green house gases from conventional thermal power plants and significant decrease in the installation cost of residential solar power plants. But the land cost and the under utilization of available space is hindering its further growth. Under these circumstances, solar photovoltaic system installation needs to accommodate the maximum number of solar panels in either roof-top or land-mounted category. In this article a new approach is suggested to maximize the total number of solar panels in a given area with enhanced energy output without compromising the overall efficiency of the system. The number of solar panels can be maximized in a solar photovoltaic energy generation system by optimizing installation parameters such as tilt angle, pitch, gain factor, altitude angle and shading to improve the energy yield. In this paper mathematical analysis is done to show that the capacity and generated energy can be enhanced by more than 25% for a given land area by optimization various parameters.

  2. Quality and yield of seven forages grown under partial shading of a simulated silvopastoral system in east Texas

    Science.gov (United States)

    J. Hill; K. Farrish; B. Oswald; L. Young; A. Shadow

    2016-01-01

    The goal of this project is to evaluate the growth and nutritional characteristics of seven forages, including various warm season native grasses, grown under simulated partial shading (50 percent typical of a loblolly pine silvopastoral system in east Texas. The results are from year two of a three year study. In order to meet the overall objective, individual,...

  3. Accurate Maximum Power Tracking in Photovoltaic Systems Affected by Partial Shading

    Directory of Open Access Journals (Sweden)

    Pierluigi Guerriero

    2015-01-01

    Full Text Available A maximum power tracking algorithm exploiting operating point information gained on individual solar panels is presented. The proposed algorithm recognizes the presence of multiple local maxima in the power voltage curve of a shaded solar field and evaluates the coordinated of the absolute maximum. The effectiveness of the proposed approach is evidenced by means of circuit level simulation and experimental results. Experiments evidenced that, in comparison with a standard perturb and observe algorithm, we achieve faster convergence in normal operating conditions (when the solar field is uniformly illuminated and we accurately locate the absolute maximum power point in partial shading conditions, thus avoiding the convergence on local maxima.

  4. Multicore PSO Operation for Maximum Power Point Tracking of a Distributed Photovoltaic System under Partially Shading Condition

    Directory of Open Access Journals (Sweden)

    Ru-Min Chao

    2016-01-01

    Full Text Available This paper identifies the partial shading problem of a PV module using the one-diode model and simulating the characteristics exhibiting multiple-peak power output condition that is similar to a PV array. A modified particle swarm optimization (PSO algorithm based on the suggested search-agent deployment, retracking condition, and multicore operation is proposed in order to continuously locate the global maximum power point for the PV system. Partial shading simulation results for up to 16 modules in series/parallel formats are presented. A distributed PV system consisting of up to 8 a-silicon thin film PV panels and also having a dedicated DC/DC buck converter on each of the modules is tested. The converter reaches its steady state voltage output in 10 ms. However for MPPT operation, voltage, and current measurement interval is set to 20 ms to avoid unnecessary noise from the entire electric circuit. Based on the simulation and experiment results, each core of the proposed PSO operation should control no more than 4 PV modules in order to have the maximum tracking accuracy and minimum overall tracking time. Tracking for the global maximum power point of a distributed PV system under various partial shading conditions can be done within 1.3 seconds.

  5. Design of the movable limiters for JT-60

    International Nuclear Information System (INIS)

    Takashima, Tetsuo; Yamamoto, Masahiro; Nakamura, Hiroo; Ohkubo, Minoru; Ohta, Mitsuru

    1976-07-01

    Two fast-acting movable rail limiters will be used in JT-60 to suppress skin effect of the plasma current with a large radius. They travel safely through a stroke of about 1 m for 0.1 sec in the build-up phase of plasma current. The movable limiter system consists of a driving mechanism, a vacuum seal, a bearing used at high temperatures in a vacuum, a molybdenum rail limiter weighing 200 kg and its auxiliary members. Many problems are involved in construction of the system because the design specifications exceed the present technology. Described are design of the movable limiter system for JT-60 and problems in the mechanical, electrical and vacuum aspects. (auth.)

  6. Evaluating Maximum Photovoltaic Integration in District Distribution Systems Considering Optimal Inverter Dispatch and Cloud Shading Conditions

    DEFF Research Database (Denmark)

    Ding, Tao; Kou, Yu; Yang, Yongheng

    2017-01-01

    . However, the intermittency of solar PV energy (e.g., due to passing clouds) may affect the PV generation in the district distribution network. To address this issue, the voltage magnitude constraints under the cloud shading conditions should be taken into account in the optimization model, which can...

  7. Comparison of the color of natural teeth measured by a colorimeter and Shade Vision System.

    Science.gov (United States)

    Cho, Byeong-Hoon; Lim, Yong-Kyu; Lee, Yong-Keun

    2007-10-01

    The objectives were to measure the difference in the color and color parameters of natural teeth measured by a tristimulus colorimeter (CM, used as a reference) and Shade Vision System (SV), and to determine the influence of color parameters on the color difference between the values measured by two instruments. Color of 12 maxillary and mandibular anterior teeth was measured by CM and SV for 47 volunteers (number of teeth=564). Color parameters such as CIE L*, a* and b* values, chroma and hue angle measured by two instruments were compared. Chroma was calculated as C*ab=(a*2 = b*2)1/2, and hue angle was calculated as h degrees =arctan(b*/a*). The influence of color parameters measured by CM on the color difference (DeltaE*(ab)) between the values measured by two instruments was analyzed with multiple regression analysis (alpha=0.01). Mean DeltaE*(ab) value between the values measured by two instruments was 21.7 (+/-3.7), and the mean difference in lightness (CIE L*) and chroma was 16.2 (+/-3.9) and 13.2 (+/-3.0), respectively. Difference in hue angle was high as 132.7 (+/-53.3) degrees . Except for the hue angle, all the color parameters showed significant correlations and the coefficient of determination (r(2)) was in the range of 0.089-0.478. Based on multiple regression analysis, the standardized partial correlation coefficient (beta) of the included predictors for the color difference was -0.710 for CIE L* and -0.300 for C*(ab) (p<0.01). All the color parameters showed significant but weak correlations except for hue angle. When lightness and chroma of teeth were high, color difference between the values measured by two instruments was small. Clinical accuracy of two instruments should be investigated further.

  8. Application of thermography for monitoring stomatal conductance of Coffea arabica under different shading systems.

    Science.gov (United States)

    Craparo, A C W; Steppe, K; Van Asten, P J A; Läderach, P; Jassogne, L T P; Grab, S W

    2017-12-31

    Stomatal regulation is a key process in the physiology of Coffea arabica (C. arabica). Intrinsically linked to photosynthesis and water relations, it provides insights into the plant's adaptive capacity, survival and growth. The ability to rapidly quantify this parameter for C. arabica under different agroecological systems would be an indispensable tool. Using a Flir E6 MIR Camera, an index that is equivalent to stomatal conductance (I g ) was compared with stomatal conductance measurements (g s ) in a mature coffee plantation. In order to account for varying meteorological conditions between days, the methods were also compared under stable meteorological conditions in a laboratory and I g was also converted to absolute stomatal conductance values (g 1 ). In contrast to typical plant-thermography methods which measure indices once per day over an extended time period, we used high resolution hourly measurements over daily time series with 9 sun and 9 shade replicates. Eight daily time series showed a strong correlation between methods, while the remaining 10 were not significant. Including several other meteorological parameters in the calculation of g 1 did not contribute to any stronger correlation between methods. Total pooled data (combined daily series) resulted in a correlation of ρ=0.66 (P≤2.2e-16), indicating that our approach is particularly useful for situations where absolute values of stomatal conductance are not required, such as for comparative purposes, screening or trend analysis. We use the findings to advance the protocol for a more accurate methodology which may assist in quantifying advantageous microenvironment designs for coffee, considering the current and future climates of coffee growing regions. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  9. Lighting and shading of PV systems in buildings: Visualisation, calculation of shading losses, optimisation; Licht und Schatten auf ``PV in Gebaeuden``: Visualisierung, Ertragsprognose, Optimierung

    Energy Technology Data Exchange (ETDEWEB)

    Reise, C. [Fraunhofer-Inst. fuer Solare Energiesysteme, Freiburg (Germany). Abt. fuer Photovoltaische Systeme und Messtechnik

    1998-02-01

    Integrating photovoltaic generators in buildings often requires a specific assessment of the local solar resource. In built-up areas, partial shading of the generator area sometimes cannot be avoided. A combination of the simulation tools RADIANCE and INSEL provides both a perfect visualization and an accurate estimation of shading losses, on the basis of the same numerical model of the building. Thus, simulation techniques help to meet both the aesthetical and the technical requirements of a building construction. (orig.) [Deutsch] Die Integration von photovoltaischen Generatoren in Gebaeude erfordert oft eine besondere Bewertung der lokalen Einstrahlungsverhaeltnisse. In einer dicht bebauten Umgebung kann eine zeitweise Teilverschattung der Generatorflaechen oft nicht vermieden werden. Eine Kombination der Simulationsprogramme RADIANCE und INSEL ermoeglicht die architektonisch vollwertige Visualisierung und Durchfuehrung einer praezisen (Minder-)Ertragsprognose fuer gebaeudeintegrierte Photovoltaik auf der Basis desselben numerischen Gebaeudemodells. Die detaillierte Simulation traegt dazu bei, aesthetische und technische Anforderungen an die Gebaeudekonstruktion in Einklang zu bringen. (orig.)

  10. CHARACTERIZATION OF VANILLA PRODUCTION SYSTEMS (Vanilla planifolia A. ON ORANGE TREE AND MESH SHADE IN THE TOTONACAPAN REGION

    Directory of Open Access Journals (Sweden)

    Ariadna Isabel Barrera Rodríguez

    2009-02-01

    Full Text Available A characterization of production systems of Vanilla planifolia Andrews was carried out, one under orange trees and the other under mesh shade (50% brightness, was conducted through the identification of technical and climatic variables that may affect the yield of vanilla plantations in the Totonacapan region, in the Mexican states of Puebla and Veracruz. The characterization was conducted based on the theoretical approach of agrosystems, and by applying the nonparametric technique, chi square. The information was obtained through the application of a structured questionnaire to 99 producers in the region. The results indicate that on vanilla crop yield, the feature with the highest incidence is the number of pollinated flowers per pot, so that in vainillales with proper management must pollinate from five to seven flowers per pot and vainillales where the plants are not vigorous should pollinate three to four flowers per pot. So far  the system under orange trees represents the best alternative in terms of yield for producers. The vanilla production system under orange trees showed a maximum yield of 1.2 ton ha-1 which exceeded the yield of the mesh shade production system of 435 kg. Based on the traditional knowledge of producers, the most important factors that determine the proper development of the vanilla pods in the production system under orange three are: nutrition (21%, moisture (19% and pollination (16%. While for the production system mesh shade are: nutrition (20%, temperature (15% and moisture (14%.

  11. The design and application of the movable limiter in EAST

    Energy Technology Data Exchange (ETDEWEB)

    Lei Cao, E-mail: caolei@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Science, Shushanhu road 350, Hefei 230031 (China); Song Yuntao [Institute of Plasma Physics, Chinese Academy of Science, Shushanhu road 350, Hefei 230031 (China)

    2011-10-15

    There are two movable limiters that have been installed on EAST. The movable limiter consists of three parts that are blade, support components and drive components. The blade which consists of heat sink and graphite tiles has to face plasma during plasma discharge. The support components consist of a long shaft and a movable plate. The drive components consists of a screw shaft, a step motor, four guide shafts and two support plates. There is an extra support which has fit in Tokamak and a frame on the outside of the flange. The specific shape of the blade has been optimized so that the graphite tiles on the blade can withstand max 5 MW/m{sup 2} heat load with two long cooling channels. The long shaft of the transfer components connect with blade to make it can move along the axis of the limiter. The movable blade could adjust a wide variety of plasma major and minor diameters. The drive components provide motion from step motor which can be remote controlled in the control room far away from the scene. The rotation is translated to slide motion by a screw shaft. The screw shaft can push the slide which connected with the long shaft to at last move the blade. To introduce the motion from outside to the vacuum vessel, the limiter has a long bellow and special structure as dynamical seal. This seal structure proved very reliable. The remote control system has been also equipped the distance sensor to provide the information of the position of the limiter. The control system is based on PC so it can be easily operated. The two movable limiters have been installed on the EAST. During past twice discharges, the movable limiter proved to be a useful tool for EAST to control the plasma boundary.

  12. The design and application of the movable limiter in EAST

    International Nuclear Information System (INIS)

    Lei Cao; Song Yuntao

    2011-01-01

    There are two movable limiters that have been installed on EAST. The movable limiter consists of three parts that are blade, support components and drive components. The blade which consists of heat sink and graphite tiles has to face plasma during plasma discharge. The support components consist of a long shaft and a movable plate. The drive components consists of a screw shaft, a step motor, four guide shafts and two support plates. There is an extra support which has fit in Tokamak and a frame on the outside of the flange. The specific shape of the blade has been optimized so that the graphite tiles on the blade can withstand max 5 MW/m 2 heat load with two long cooling channels. The long shaft of the transfer components connect with blade to make it can move along the axis of the limiter. The movable blade could adjust a wide variety of plasma major and minor diameters. The drive components provide motion from step motor which can be remote controlled in the control room far away from the scene. The rotation is translated to slide motion by a screw shaft. The screw shaft can push the slide which connected with the long shaft to at last move the blade. To introduce the motion from outside to the vacuum vessel, the limiter has a long bellow and special structure as dynamical seal. This seal structure proved very reliable. The remote control system has been also equipped the distance sensor to provide the information of the position of the limiter. The control system is based on PC so it can be easily operated. The two movable limiters have been installed on the EAST. During past twice discharges, the movable limiter proved to be a useful tool for EAST to control the plasma boundary.

  13. 49 CFR 236.312 - Movable bridge, interlocking of signal appliances with bridge devices.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Movable bridge, interlocking of signal appliances with bridge devices. 236.312 Section 236.312 Transportation Other Regulations Relating to... SYSTEMS, DEVICES, AND APPLIANCES Interlocking Standards § 236.312 Movable bridge, interlocking of signal...

  14. Modeling Hydrological Services in Shade Grown Coffee Systems: Case Study of the Pico Duarte Region of the Dominican Republic

    Science.gov (United States)

    Erickson, J. D.; Gross, L.; Agosto Filion, N.; Bagstad, K.; Voigt, B. G.; Johnson, G.

    2010-12-01

    The modification of hydrologic systems in coffee-dominated landscapes varies widely according to the degree of shade trees incorporated in coffee farms. Compared to mono-cropping systems, shade coffee can produce both on- and off-farm benefits in the form of soil retention, moderation of sediment transport, and lower hydropower generating costs. The Pico Duarte Coffee Region and surrounding Madres de Las Aguas (Mother of Waters) Conservation Area in the Dominican Republic is emblematic of the challenges and opportunities of ecosystem service management in coffee landscapes. Shade coffee poly-cultures in the region play an essential role in ensuring ecosystem function to conserve water resources, as well as provide habitat for birds, sequester carbon, and provide consumptive resources to households. To model the provision, use, and flow of ecosystem services from coffee farms in the region, an application of the Artificial Intelligence for Ecosystem Services (ARIES) model was developed with particular focus on sediment regulation. ARIES incorporates an array of techniques from data mining, image analysis, neural networks, Bayesian statistics, information theory, and expert systems to model the production, delivery, and demand for ecosystem services. Geospatial data on slope, soils, and vegetation cover is combined with on-farm data collection of coffee production, tree diversity, and intercropping of household food. Given hydropower production and river recreation in the region, the management of sedimentation through on-farm practices has substantial, currently uncompensated value that has received recent attention as the foundation for a payment for ecosystem services system. Scenario analysis of the implications of agro-forestry management choices on farmer livelihoods and the multiple beneficiaries of farm-provided hydrological services provide a foundation for ongoing discussions in the region between local, national, and international interests.

  15. FeedbackBetweenHumanActivitiesAndTerrestrialCarbonCyclesInSystemsOfShadeCoffeePro ductionInMexico

    Science.gov (United States)

    Pena Del Valle, A. E.; Perez-Samayoa, I. A.

    2007-12-01

    Coffee production in Mexico is carried out within a strong natural context. Coffee is grown under a canopy of several native and introduced tree species. This fact ensures a greater diversity of natural resources and environmental services available for local inhabitants to sustain their livelihoods. However, the lack of opportunities for coffee farmers is increasing the demand over the remaining forest areas by exacerbating non- sustainable timber extraction practices and promoting conversion of forests to pasture lands. This situation hampers the landscapes equilibrium and threatens the wellbeing of rural livelihoods. To understand the interactions between human activities and ecological functions associated with shaded coffee systems, this research has explored the extent to which socio-economic and cultural factors have influenced the use and management of natural resources sustaining coffee livelihoods. At the same time, it examines how customary patterns of resource use have induced changes in the terrestrial carbon cycle at the local level. The empirical study was carried out in a coffee-growing region in Mexico. It involved substantial fieldwork, use of satellite imagery, and participatory research methods in order to gauge a variety of biophysical and socio- economic factors, including forest cover, land use, and carbon balances, as well as, farming practices and off- farming strategies. In addition, a livelihood perspective was applied to approach the linkages between the management of natural resources, the environmental goods and services, and the socio-economic conditions in the coffee-growing region. The empirical evidence from the research marks out shade coffee systems as important supporters for broader natural systems as suppliers of environmental services. However, it also suggests that non-climatic factors might have significant impacts on the local environment and therefore on the terrestrial carbon cycle. According to the research estimations

  16. Shading Ratio Impact on Photovoltaic Modules and Correlation with Shading Patterns

    Directory of Open Access Journals (Sweden)

    Alonso Gutiérrez Galeano

    2018-04-01

    Full Text Available This paper presents the study of a simplified approach to model and analyze the performance of partially shaded photovoltaic modules using the shading ratio. This approach integrates the characteristics of shaded area and shadow opacity into the photovoltaic cell model. The studied methodology is intended to improve the description of shaded photovoltaic systems by specifying an experimental procedure to quantify the shadow impact. Furthermore, with the help of image processing, the analysis of the shading ratio provides a set of rules useful for predicting the current–voltage behavior and the maximum power points of shaded photovoltaic modules. This correlation of the shading ratio and shading patterns can contribute to the supervision of actual photovoltaic installations. The experimental results validate the proposed approach in monocrystalline and polycrystalline technologies of solar panels.

  17. Movability or Autonomy for Humans

    KAUST Repository

    Schnapp, Jeffrey

    2018-01-18

    A human-centered approach to the design of smart robotic vehicles Contrary to the feverish promises of early 20th century futurists, the romance of the road has driven humanity down a dead end. The civilization of speed, acceleration, and motorized mobility has transformed the world into a perpetual traffic jam. Entire cities are being sacrificed on the altar of automobility. The landscape is being reduced to a flyover and drive-through zone, fissured by asphalt ribbons, fracked to extract fuels whose combustion is cooking the globe. Nearly 80% of urban areas are wrapped in dense blankets of smog. People arenメt moving more: they are moving less and with greater difficulty. And they are facing the health consequences of the sedentary life-styles they have been encouraged to adopt. If this is era of mobility, then I believe itメs time to shift gears: from mobility to movability. In this lecture, Jeffrey Schnapp will discuss how Movability unfolds on the far more intimate, intelligent, human-scale of the emerging 21st century cityscape. Itメs the scale of autonomous land drones threading their way down busy sidewalks; the scale of smart cargo carts invisibly coupled to workers making last mile deliveries in pedestrian-only zones; the scale of electric microcars platooning like trains while stopping off at individual destinations for pickups and dropoffs; and the scale of civic spaces animated by new kinds of vehicles that help the aging or the mobility-impaired to improve the quality of their lives and extend the range of their activities.

  18. Analysis and Modeling of Parallel Photovoltaic Systems under Partial Shading Conditions

    Science.gov (United States)

    Buddala, Santhoshi Snigdha

    Since the industrial revolution, fossil fuels like petroleum, coal, oil, natural gas and other non-renewable energy sources have been used as the primary energy source. The consumption of fossil fuels releases various harmful gases into the atmosphere as byproducts which are hazardous in nature and they tend to deplete the protective layers and affect the overall environmental balance. Also the fossil fuels are bounded resources of energy and rapid depletion of these sources of energy, have prompted the need to investigate alternate sources of energy called renewable energy. One such promising source of renewable energy is the solar/photovoltaic energy. This work focuses on investigating a new solar array architecture with solar cells connected in parallel configuration. By retaining the structural simplicity of the parallel architecture, a theoretical small signal model of the solar cell is proposed and modeled to analyze the variations in the module parameters when subjected to partial shading conditions. Simulations were run in SPICE to validate the model implemented in Matlab. The voltage limitations of the proposed architecture are addressed by adopting a simple dc-dc boost converter and evaluating the performance of the architecture in terms of efficiencies by comparing it with the traditional architectures. SPICE simulations are used to compare the architectures and identify the best one in terms of power conversion efficiency under partial shading conditions.

  19. Shading effect on microclimate and thermal comfort indexes in integrated crop-livestock-forest systems in the Brazilian Midwest.

    Science.gov (United States)

    Karvatte, Nivaldo; Klosowski, Elcio Silvério; de Almeida, Roberto Giolo; Mesquita, Eduardo Eustáquio; de Oliveira, Caroline Carvalho; Alves, Fabiana Villa

    2016-12-01

    The objective of this paper was to perform a microclimate evaluation and determine the indexes of thermal comfort indexes, in sun and shade, in integrated crop-livestock-forest systems with different arrangements of eucalyptus and native trees, in the Brazilian Midwest. The experiment was conducted at Embrapa Beef Cattle in Campo Grande, state of Mato Grosso do Sul, Brazil, from July to September 2013. The evaluations were conducted on four consecutive days, from 8:00 a.m. to 5:00 p.m., local time (GMT -4:00), with 1 hour intervals, recording the microclimate parameters: air temperature (°C), black globe temperature (°C), wet bulb temperature (°C), relative humidity (%), and wind speed (m.s -1 ), for the subsequent calculation of the Temperature and Humidity Index, the Black Globe Temperature and Humidity Index, and the Radiant Thermal Load. The largest changes in microclimate parameters were found in the full sun, between 12:00 p.m. and 1:00 p.m., in less dense eucalyptus system, followed by the scattered native trees system, resulting in a maximum Temperature and Humidity Index of 81, Black Globe Temperature and Humidity Index of 88 and Radiant Thermal Load of 794 W m -2 . Therefore, it is observed that with the presence of trees in pastures were possible reductions of up to 3.7 % in Temperature and Humidity Index, 10.2 % in the Black Globe Temperature and Humidity Index, and 28.3 % of the Radiant Thermal Load in the shade. Thus, one can conclude that the presence of trees and their arrangement in the systems provide better microclimate conditions and animal thermal comfort in pastures.

  20. Matlab-Based Modeling and Simulations to Study the Performance of Different MPPT Techniques Used for Photovoltaic Systems under Partially Shaded Conditions

    Directory of Open Access Journals (Sweden)

    Jehun Hahm

    2015-01-01

    Full Text Available A pulse-width-modulator- (PWM- based sliding mode controller is developed to study the effects of partial shade, temperature, and insolation on the performance of maximum power point tracking (MPPT used in photovoltaic (PV systems. Under partially shaded conditions and temperature, PV array characteristics become more complex, with multiple power-voltage maxima. MPPT is an automatic control technique to adjust power interfaces and deliver power for a diverse range of insolation values, temperatures, and partially shaded modules. The PV system is tested using two conventional algorithms: the Perturb and Observe (P&O algorithm and the Incremental Conductance (IncCond algorithm, which are simple to implement for a PV array. The proposed method applied a model to simulate the performance of the PV system for solar energy usage, which is compared to the conventional methods under nonuniform insolation improving the PV system utilization efficiency and allowing optimization of the system performance. The PWM-based sliding mode controller successfully overcomes the issues presented by nonuniform conditions and tracks the global MPP. In this paper, the PV system consists of a solar module under shade connected to a boost converter that is controlled by three different algorithms and is generated using Matlab/Simulink.

  1. A Simple Checking Algorithm with Perturb and Observe Maximum Power Point Tracking for Partially Shaded Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Rozana Alik

    2016-03-01

    Full Text Available This paper presents a simple checking algorithm for maximum power point tracking (MPPT technique for Photovoltaic (PV system using Perturb and Observe (P&O algorithm. The main benefit of this checking algorithm is the simplicity and efficiency of the system whose duty cycle produced by the MPPT is smoother and changes faster according to maximum power point (MPP. This checking algorithm can determine the maximum power first before the P&O algorithm takes place to identify the voltage at MPP (VMPP, which is needed to calculate the duty cycle for the boost converter. To test the effectiveness of the algorithm, a simulation model of PV system has been carried out using MATLAB/Simulink under different level of irradiation; or in other words partially shaded condition of PV array. The results from the system using the proposed approach prove to have faster response and low ripple. Besides, the results are close to the desired outputs and exhibit an approximately 98.25% of the system efficiency. On the other hand, the system with conventional P&O MPPT seems to be unstable and has higher percentage of error. In summary, the proposed method is useful under varying level of irradiation with higher efficiency of the system.

  2. Quantification of Shading Tolerability for Photovoltaic Modules

    NARCIS (Netherlands)

    Ziar, H.; Asaei, Behzad; Farhangi, Shahrokh; Isabella, O.; Korevaar, M.A.N.; Zeman, M.

    2017-01-01

    Despite several decades of research in the field of photovoltaic (PV) systems, shading tolerance has still not been properly addressed. PV modules are influenced by shading concerning many factors, such as number and configuration of cells in the module, electrical and thermal characteristics of

  3. TFTR movable limiter instrumentation and controls

    International Nuclear Information System (INIS)

    Frankenberg, J.; Collins, D.; Kaufmann, D.; Mamoun, A.

    1983-01-01

    The TFTR movable limiter is a single poloidal limiter located within one 18 /SUP o/ segment of the vacuum vessel. It consists of three (3) interconnected inconel backing plates covered with titanium carbide coated graphite tiles. The backing plates are positioned by three independent screw drive actuators. Cooling water is fed through the horizontal port cover to tubes brazed onto the backs of the backing plates. Thermocouples monitor the limiter temperature. (1) and more fully described in refs. (1) and (2). The positioning actuators are driven by independently controlled DC servo motors, controlled either locally or from CICADA. Drive motor shaft position is monitored by chain driven encoders and potentiometers. Limiter blade position can be varied to suit any plasma within the operating range. CICADA is programmed to keep the limiter stroke within safe operating limits. A microprocessor duplicates the CICADA protective function allowing limiter operation without CICADA. The potentiometer signal is sent to an analog computer, which safeguards the limiter against failure of the encoders or the micro-processor. Cooling water flows through the limiter in 3 separate paths, one for each blade. The flow rate and temperature rise through each loop are measured accurately to allow CICADA to calculate the heat into each blade. The water system is also interlocked and alarmed to prevent dumping of water into the vacuum vessel

  4. Shaded Spacecraft Radiators to Be Used on the Daytime Surface of the Mercury Planet, the Moon, and Asteroids of the Solar System Inner Part

    Directory of Open Access Journals (Sweden)

    V. A. Igrickii

    2016-01-01

    Full Text Available During the daytime a surface of the Moon, Mercury planet, and asteroids of the Solar system inner part, significantly heats up, and infrared radiation of the local soil becomes essential. At the same time direct solar radiation and reflected from the surface solar radiation reach the maximum too. These radiation fluxes can significantly decrease the efficiency of spacecraft radiators in the daytime. This effect is especially strong on the Mercury surface where direct solar radiation is 10 times stronger than solar radiation near the Earth. As a result, on the daytime surface of the Mercury the conventional low-temperature radiators become completely disabled.The article describes the development of the special shaded spacecraft radiators to be used in daytime on the Mercury and other atmosphereless bodies of the Solar system inner part. To solve this task are used mirror shades. The shape of these shades is developed to improve operation conditions of the spacecraft radiator through the appropriate scheme of radiation reflection. The task is discussed in 2D and 3D cases. A new design of shaded spacecraft radiators is proposed, and reasonable proportions of radiators are determined. The performance capability of proposed radiators for environments of the Mercury and the Moon is estimated using the zonal method in view of partial mirror reflection. The calculations showed that the developed shaded spacecraft radiators are capable to work on the Mercury surface as the low-temperature radiators even during the daytime. New radiators provide minimum accepted operating temperature of 241К (-32°С, meanwhile radiators of common design have minimum operating temperature of 479К (206°С. Using such radiators on the Moon enables us to increase effectiveness of spacecraft radiators and to decrease their minimum operating temperature from 270К (-3°С to 137К (-136°С.

  5. Positron annihilation imaging device having movable collimator

    International Nuclear Information System (INIS)

    Thompson, C.J.

    1981-01-01

    This patent application relates to a positron annihilation imaging device comprising two circular arrays of detectors disposed in spaced apart parallel planes and circumferentially offset by half the detector spacing, axially movable annular outer collimator rings, generally disposed in a pair of opposite planes outside the associated planes of the detectors, each collimator being movable toward the opposite collimator. An inner collimator of annular configuration is disposed between the two rows of detectors and is formed in two rings which may be separated axially. The outer and inner collimators serve to enhance data readout and imaging. (author)

  6. Movable collimator for positron annihilation imaging device

    International Nuclear Information System (INIS)

    Thompson, C.J.

    1981-01-01

    A positron annihilation imaging device having two circular arrays of detectors disposed in spaced apart parallel planes wherein axially movable annular collimator rings are generally disposed in a pair of opposite planes outside the associated planes of the collimators to each collimator being movable toward the opposite collimator and a central collimator of annular configuration generally disposed between the two rows of detectors but being split into two rings which may be separated, the outer and inner collimators serving to enhance data readout and imaging

  7. Movable geometry and eigenvalue search capability in the MC21 Monte Carlo code

    International Nuclear Information System (INIS)

    Gill, D. F.; Nease, B. R.; Griesheimer, D. P.

    2013-01-01

    A description of a robust and flexible movable geometry implementation in the Monte Carlo code MC21 is described along with a search algorithm that can be used in conjunction with the movable geometry capability to perform eigenvalue searches based on the position of some geometric component. The natural use of the combined movement and search capability is searching to critical through variation of control rod (or control drum) position. The movable geometry discussion provides the mathematical framework for moving surfaces in the MC21 combinatorial solid geometry description. A discussion of the interface between the movable geometry system and the user is also described, particularly the ability to create a hierarchy of movable groups. Combined with the hierarchical geometry description in MC21 the movable group framework provides a very powerful system for inline geometry modification. The eigenvalue search algorithm implemented in MC21 is also described. The foundations of this algorithm are a regula falsi search though several considerations are made in an effort to increase the efficiency of the algorithm for use with Monte Carlo. Specifically, criteria are developed to determine after each batch whether the Monte Carlo calculation should be continued, the search iteration can be rejected, or the search iteration has converged. These criteria seek to minimize the amount of time spent per iteration. Results for the regula falsi method are shown, illustrating that the method as implemented is indeed convergent and that the optimizations made ultimately reduce the total computational expense. (authors)

  8. Movable geometry and eigenvalue search capability in the MC21 Monte Carlo code

    Energy Technology Data Exchange (ETDEWEB)

    Gill, D. F.; Nease, B. R.; Griesheimer, D. P. [Bettis Atomic Power Laboratory, PO Box 79, West Mifflin, PA 15122 (United States)

    2013-07-01

    A description of a robust and flexible movable geometry implementation in the Monte Carlo code MC21 is described along with a search algorithm that can be used in conjunction with the movable geometry capability to perform eigenvalue searches based on the position of some geometric component. The natural use of the combined movement and search capability is searching to critical through variation of control rod (or control drum) position. The movable geometry discussion provides the mathematical framework for moving surfaces in the MC21 combinatorial solid geometry description. A discussion of the interface between the movable geometry system and the user is also described, particularly the ability to create a hierarchy of movable groups. Combined with the hierarchical geometry description in MC21 the movable group framework provides a very powerful system for inline geometry modification. The eigenvalue search algorithm implemented in MC21 is also described. The foundations of this algorithm are a regula falsi search though several considerations are made in an effort to increase the efficiency of the algorithm for use with Monte Carlo. Specifically, criteria are developed to determine after each batch whether the Monte Carlo calculation should be continued, the search iteration can be rejected, or the search iteration has converged. These criteria seek to minimize the amount of time spent per iteration. Results for the regula falsi method are shown, illustrating that the method as implemented is indeed convergent and that the optimizations made ultimately reduce the total computational expense. (authors)

  9. “GEOHeritage” - GIS Based Application for Movable Heritage

    Directory of Open Access Journals (Sweden)

    Albina Moscicka

    2011-12-01

    Full Text Available The paper will present the results of a research project „A methodology for mapping movable heritage”.  This project, financed by the Polish Ministry of Science and Higher Education in 2008-2010, was realized by the Institute of Geodesy and Cartography in cooperation with the Research and Academic Computer Network (portal Polska.pl, the Central Archives of Historical Records and Department of Art History of the Wroclaw University. The idea of the project was to simplify access to digital movable cultural heritage by the use of spatial information. The main aspect of the project was to use a Geographic Information System (GIS - as a technology and as a tool - to integrate different digital collections, present their content in one space and provide online access to them from one common level – from an online map. The essence of the research was to present on the online map movable monument as multi-spatial object. The base of this assumption is that most of monuments, especially movable ones, can have several places in the geographical space that are connected with them (several various space relations. As a rule archival documents were created in one place, describe the other, today can be kept in places far away from the place they were prepared, and what more the parts of the same collection can be kept in different archives. Moreover, one single document can be connected or have relations (typological, thematically, temporal, spatial with other relations to the same or the other one. The reason for it is that documents concerning various places are housed in the same archive, various documents can present the same place or the place of creating particular document can be the place of housing another. In the project the basic source material was digital collections of original records. Their metadata defined in the international standards of monuments’ description were used for connecting digital monuments with the geographic space

  10. Shade variance in ceramic restoration and shade tab: An in vitro study

    Directory of Open Access Journals (Sweden)

    Pannaikadu Somasundaram Prabu

    2012-01-01

    Full Text Available Background: In clinical practice aesthetics for any restoration needs to consider the parameters of surface form, translucency and colour.To achieve ideal aesthetics the colour replication process for dental porcelain is the most important step which comprises of a shade selection phase followed by shade duplication. Materials and Methods: The ceramic brands Vita VMK95 (classic and Ivoclar classic V were used for comparison with Vita classic shade tab guide shades A2 and B2. The samples were made of specific shape, size, and were of the recommended dimensions from investing self-cure acrylic strips to casted NiCr specimens Objective. The objective of this study was to quantify the results in CIE AE units system for the colour differences between the Vita shade guide colours and two commercial porcelains for metal ceramic crowns. Results: The results indicated that the porcelains do not match the shade guides to which they are compared and shade variations exist between different lots of porcelain from the same and different manufacturer. Conclusion: Problems identified that porcelains do not match the shade guides to which they are compared and shade variations exist between different lots of porcelain from the same and different manufacturer

  11. PowerFilm PowerShade Fixed Site Solar System Cost Reduction Plan

    Science.gov (United States)

    2014-07-31

    system was designed which adds capability of grid tie connection to the standalone function. This battery operating system has built-in intelligence...goal concerning alternative conductive grid inks was to reduce the cost of the silver ink layer without a reduction in PV power with experimentation... system . To overcome this loss, a new BOS unit with higher power transfer efficiency has been developed. This system also has grid tie

  12. Evaluation of the Efficacy and Color Stability of Two Different At-Home Bleaching Systems on Teeth of Different Shades: A Randomized Controlled Clinical Trial.

    Science.gov (United States)

    Aka, Betül; Celik, Esra Uzer

    2017-09-01

    This randomized controlled clinical trial compared the bleaching efficacy of two different at-home bleaching systems on teeth of different shades and their color stability after a 6-month follow-up. Ninety-two patients (777 teeth) were randomly divided into three groups: (a) negative control, (b) patients treated with a custom-made tray containing 10% carbamide peroxide (10% CP/PF) (Opalescence PF), and (c) patients treated with a pre-loaded tray containing 6% hydrogen peroxide (6% HP/Go) (Opalescence Go). Teeth in all groups were divided into three sub-groups according to the VITA Classic Shade Guide: light (A1-C1), medium dark (C2-B3), and dark (A3.5-C4). Bleaching systems were performed in accordance with manufacturers' instructions for 14 days. The color values were measured at the baseline, 10 days and 14 days of bleaching, 2 weeks, and 6 months after bleaching. Three-way ANOVA and Mann-Whitney U tests were used for statistical analysis (α = 0.05). Irrespective of original shade, both bleaching groups showed significantly higher ΔE* values than the control groups, and the ΔE* values were significantly higher in the 10% CP/PF groups than those in the 6% HP/Go groups (p bleaching systems, the dark teeth showed higher ΔE* values than the light teeth (p bleaching agents produced a bleaching effect, but 10% CP/PF was more effective. A pre-loaded tray system may be used for dental bleaching, but it is still less effective than conventional a 10% carbamide peroxide system, irrespective of the initial shade. (J Esthet Restor Dent 29:325-338, 2017). © 2017 Wiley Periodicals, Inc.

  13. 49 CFR 236.766 - Locking, movable bridge.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Locking, movable bridge. 236.766 Section 236.766... Locking, movable bridge. The rail locks, bridge locks, bolt locks, circuit controllers, and electric locks used in providing interlocking protection at a movable bridge. ...

  14. Effects of shade and input management on economic performance of small-scale Peruvian coffee systems

    NARCIS (Netherlands)

    Jezeer, Rosalien E.|info:eu-repo/dai/nl/374336865; Ferreira Dos Santos, Maria Joao|info:eu-repo/dai/nl/371571979; Boot, René G.A.|info:eu-repo/dai/nl/069412928; Junginger, Martin|info:eu-repo/dai/nl/202130703; Verweij, Pita A.|info:eu-repo/dai/nl/145431843

    2018-01-01

    Tropical agroforestry systems provide a number of ecosystem services that might help sustain the production of multiple crops, improve farmers’ livelihoods and conserve biodiversity. A major drawback of agroforestry coffee systems is the perceived lower economic performance compared to high-input

  15. Dinitrogen fixation by legume shade trees and direct transfer of fixed N to associated cacao in a tropical agroforestry system.

    Science.gov (United States)

    Nygren, Pekka; Leblanc, Humberto A

    2015-02-01

    Natural abundance of (15)N (δ (15)N) was determined in bulk soil, rhizospheric soil and vegetation in an organically managed cacao (Theobroma cacao L.) plantation with Inga edulis Mart. legume trees (inga) as the principal shade for studying the nitrogen (N) cycle in the system. Cacao without contact with legumes in an adjacent plantation was used as the reference for N2 fixation and direct N transfer calculations. Bulk and rhizospheric soils contained 72 and 20%, respectively, of whole- system N. No vegetation effect on δ (15)N in rhizospheric soil was detected, probably due to the high native soil N pool. Fine roots of the cacaos associated with inga contained ∼35% of N fixed from the atmosphere (Nf) out of the total N. Leaves of all species had significantly higher δ (15)N than fine roots. Twenty percent of system Nf was found in cacao suggesting direct N transfer from inga via a common mycelial network of mycorrhizal fungi or recycling of N-rich root exudates of inga. Inga had accumulated 98 kg [Nf] ha(-1) during the 14-year history of the plantation. The conservative estimate of current N2 fixation rate was 41 kg [Nf] ha(-1) year(-1) based on inga biomass only and 50 kg [Nf] ha(-1) year(-1) based on inga and associated trees. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  16. The Use of Sound Absorbing Shading Systems for the Attenuation of Noise on Building Façades. An Experimental Investigation

    Directory of Open Access Journals (Sweden)

    Nicolò Zuccherini Martello

    2015-12-01

    Full Text Available The problem of solar irradiation in building façades with large windows is often solved with the use of external shading devices, such as brise-soleil systems, but their potential acoustic effects on building façades are usually neglected. The purpose of this work is a preliminary consideration of the acoustic behaviour of brise-soleil systems and, furthermore, the evaluation of the possibility to improve their performances, in terms of Sound Pressure Level (SPL abatement over glass surfaces. The paper reports the results of a study on two portions of the same office building, with shading devices installed in front of large windows. Both airborne sound insulation measurements and SPL measurements over the glass surfaces of the windows were carried out to compare different situations, with or without louvers, and with sound absorbing experimental louvers as well. Results show that the louvers' presence can produce an increase in the SPL over the glass surface as a consequence of the reflection of the sound. Results further show that sound absorbing louvers improve the noise protection of the system, in terms of the SPL reduction, over glass surfaces, cancelling out the negative effect of the standard shading devices.

  17. Protective shade, tree diversity and soil properties in coffee agroforestry systems in the Atlantic Rainforest biome.

    NARCIS (Netherlands)

    Souza, de H.N.; Goede, de R.G.M.; Brussaard, L.; Cardoso, I.M.; Duarte, E.M.G.; Fernandes, R.B.A.; Gomes, L.C.; Pulleman, M.M.

    2012-01-01

    Sustainable production and biodiversity conservation can be mutually supportive in providing multiple ecosystem services to farmers and society. This study aimed to determine the contribution of agroforestry systems, as tested by family farmers in the Brazilian Rainforest region since 1993, to tree

  18. Comparative analysis of distributed MPPT controllers for partially shaded stand alone photovoltaic systems

    International Nuclear Information System (INIS)

    Muthuramalingam, M.; Manoharan, P.S.

    2014-01-01

    Highlights: • Analyzes the performance of ANN and ANFIS MPPT algorithms by stand alone PV system. • ISSBC with ANFIS can provide the overall efficiency higher than ANN. • CHBMLI integrate with SHE ANN modulation technique improve output voltage quality. • Simulation and hardware results show the ANFIS algorithm efficient than ANN algorithm. - Abstract: This paper presents a unique combination of an interleaved soft switched boost converter (ISSBC) run by a set of two photovoltaic panel (PV) with a distributed MPPT, suitable to guarantee MPPT even under partial shadowed conditions, managed by an adaptive neuro fuzzy inference system trained by the training data derived from a particle swarm optimization (PSO–ANFIS) unit. The ISSBC is followed by a, single phase cascaded H bridge five-level inverter (CHI) driven by the individual DC outputs of the ISSBC, with selective harmonic elimination scheme to eliminate typically the seventh order harmonics. A comparison of different intelligent distributed maximum power point tracking (MPPT) algorithms for photovoltaic (PV) system under partial shadow conditions is carried out. The use of the ISSBC guarantees mitigation of ripple and it is meant to handle higher currents with minimal switching losses. Simulation was carried out in the Matlab Simulink environment and an experimental verification with a scaled down model validated the proposed scheme. It has been thus established, by both simulation and experimental verification, that the PSO–ANFIS model of distributed MPPT scheme of control outperforms other schemes of control for MPPT

  19. a Movable Charging Unit for Green Mobility

    Science.gov (United States)

    ElBanhawy, E. Y.; Nassar, K.

    2013-05-01

    Battery swapping of electric vehicles (EVs) matter appears to be the swiftest and most convenient to users. The existence of swapping stations increases the feasibility of distributed energy storage via the electric grid. However, it is a cost-prohibitive way of charging. Early adaptors' preferences of /perceptions about EV system in general, has its inflectional effects on potential users hence the market penetration level. Yet, the charging matter of electric batteries worries the users and puts more pressure on them with the more rigorous planning-ahead they have to make prior to any trip. This paper presents a distinctive way of charging. It aims at making the overall charging process at ease. From a closer look into the literature, most of EVs' populations depend on domestic charge. Domestic charging gives them more confidence and increases the usability factor of the EV system. Nevertheless, they still need to count on the publically available charging points to reach their destination(s). And when it comes to multifamily residences, it becomes a thorny problem as these apartments do not have a room for charging outlets. Having said the irritating charging time needed to fatten the batteries over the day and the minimal average mileage drove daily, hypothetically, home delivery charging (Movable Charging Unit-MCU) would be a stupendous solution. The paper discusses the integration of shortest path algorithm problem with the information about EV users within a metropolitan area, developing an optimal route for a charging unit. This MCU delivers charging till homes whether by swapping batteries or by fast charging facility. Information about users is to be provided by the service provider of the neighbourhood, which includes charging patterns (timing, power capacity). This problem lies under the shortest path algorithms problem. It provides optimal route of charging that in return shall add more reliability and usability values and alleviate the charging

  20. Simplified Method for Modeling the Impact of Arbitrary Partial Shading Conditions on PV Array Performance: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    MacAlpine, Sara; Deline, Chris

    2015-09-15

    It is often difficult to model the effects of partial shading conditions on PV array performance, as shade losses are nonlinear and depend heavily on a system's particular configuration. This work describes and implements a simple method for modeling shade loss: a database of shade impact results (loss percentages), generated using a validated, detailed simulation tool and encompassing a wide variety of shading scenarios. The database is intended to predict shading losses in crystalline silicon PV arrays and is accessed using basic inputs generally available in any PV simulation tool. Performance predictions using the database are within 1-2% of measured data for several partially shaded PV systems, and within 1% of those predicted by the full, detailed simulation tool on an annual basis. The shade loss database shows potential to considerably improve performance prediction for partially shaded PV systems.

  1. Tints, Shades and Frost

    Science.gov (United States)

    Sterling, Joan

    2009-01-01

    This article describes a classroom art project inspired by the work of Robert Frost, one of the most acclaimed and beloved American poets of all time. Using tints and shades in a composition, this project demonstrates how quality literature may be incorporated into elementary art lessons in a very useful way, making art an important complement to…

  2. Analysis of MPPT Failure and Development of an Augmented Nonlinear Controller for MPPT of Photovoltaic Systems under Partial Shading Conditions

    Directory of Open Access Journals (Sweden)

    Mingxuan Chen

    2017-01-01

    Full Text Available The output–voltage–power curves of photovoltaic (PV arrays exhibit complex multi-peak shapes when local shading occurs. The existing maximum power point tracking (MPPT algorithms to solve this multi-peak problem do not consider the possibility of tracking failures due to the time of the irradiance change. In this study, first, the reason for the failure of the global MPPT (GMPPT algorithm is analyzed based on the PV array mathematical model and its output characteristics under partial shading conditions; then, in order to estimate the MPP voltage, an artificial neural network (ANN is trained using environmental information such as irradiance. A hybrid MPPT method using an augmented state feedback precise linearization (AFL controller combined with an ANN is proposed to solve problems such as the shift of the static operating point of the DC/DC boost converter. Finally, numerical simulations are conducted to validate the proposed method and eliminate the possibility of MPPT failure. The proposed hybrid MPPT method is compared with the conventional perturb and observe (P & O method and the improved P & O method through simulations. Using the proposed neural network and nonlinear control strategy, the MPP can be tracked rapidly, accurately, and statically, proving that the method is feasible and effective.

  3. Management of excessive movable tissue: a modified impression technique.

    Science.gov (United States)

    Shum, Michael H C; Pow, Edmond H N

    2014-08-01

    Excessive movable tissue is a challenge in complete denture prosthetics. A modified impression technique is presented with polyvinyl siloxane impression material and a custom tray with relief areas and perforations in the area of the excessive movable tissue. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  4. 23 CFR 650.809 - Movable span bridges.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Movable span bridges. 650.809 Section 650.809 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Navigational Clearances for Bridges § 650.809 Movable span bridges. A fixed bridge...

  5. Movable MEMS Devices on Flexible Silicon

    KAUST Repository

    Ahmed, Sally

    2013-05-05

    Flexible electronics have gained great attention recently. Applications such as flexible displays, artificial skin and health monitoring devices are a few examples of this technology. Looking closely at the components of these devices, although MEMS actuators and sensors can play critical role to extend the application areas of flexible electronics, fabricating movable MEMS devices on flexible substrates is highly challenging. Therefore, this thesis reports a process for fabricating free standing and movable MEMS devices on flexible silicon substrates; MEMS flexure thermal actuators have been fabricated to illustrate the viability of the process. Flexure thermal actuators consist of two arms: a thin hot arm and a wide cold arm separated by a small air gap; the arms are anchored to the substrate from one end and connected to each other from the other end. The actuator design has been modified by adding etch holes in the anchors to suit the process of releasing a thin layer of silicon from the bulk silicon substrate. Selecting materials that are compatible with the release process was challenging. Moreover, difficulties were faced in the fabrication process development; for example, the structural layer of the devices was partially etched during silicon release although it was protected by aluminum oxide which is not attacked by the releasing gas . Furthermore, the thin arm of the thermal actuator was thinned during the fabrication process but optimizing the patterning and etching steps of the structural layer successfully solved this problem. Simulation was carried out to compare the performance of the original and the modified designs for the thermal actuators and to study stress and temperature distribution across a device. A fabricated thermal actuator with a 250 μm long hot arm and a 225 μm long cold arm separated by a 3 μm gap produced a deflection of 3 μm before silicon release, however, the fabrication process must be optimized to obtain fully functioning

  6. Microclimate without shade and silvopastoral system during summer and winter - doi: 10.4025/actascianimsci.v35i1.15155 Microclimate without shade and silvopastoral system during summer and winter - doi: 10.4025/actascianimsci.v35i1.15155

    Directory of Open Access Journals (Sweden)

    Alexandre Krutzman

    2013-01-01

    Full Text Available This study evaluated the microclimate in a system without shade (WS and in a silvopastoral system (SP with eucalyptus during summer and winter, by measuring the air temperature (Ta, black globe temperature (Tg, relative humidity (RH, wind speed (Ws, every 2 hours for 24 hours between rows, shade (SP and no shade effect (WS. It was employed the randomized blocks design (months, in the plots (systems, subplots (hours and sub-subplots (seasons. Except for Ta and RH, the Tg (24.73, 26.41ºC, Ws (3.16, 4.57 m s-1, Black globe-humidity index (BGHI (71.83, 73.84, Thermal load index (TLI (74.53, 76.11 and Radiant thermal load (RTL (526.46, 595.80 W m-2, respectively for SP and WS, were higher in WS. Ta, RH and Ws had a quadratic effect of hour. There was an effect of season, respectively in summer and winter, on the Ta (27.55, 14.93°C, RH (72.11, 60.68%, Tg (29.80, 21.33°C, BGHI (80.04, 65.63, TLI (81.64, 69.00 and RTL (575.65, 546.61 W m-2. Tg, RH and RTL showed an interaction of season x hour, and a quadratic effect, and the RTL had an interaction of system x season. The Tg was correlated with BGHI (0.962, TLI (0.956 and RTL (0.809. The silvopastoral system decreased the Tg and Ws, and made the environment more harmonious by decreasing the climatic differences between seasons.  This study evaluated the microclimate in a system without shade (WS and in a silvopastoral system (SP with eucalyptus during summer and winter, by measuring the air temperature (Ta, black globe temperature (Tg, relative humidity (RH, wind speed (Ws, every 2 hours for 24 hours between rows, shade (SP and no shade effect (WS. It was employed the randomized blocks design (months, in the plots (systems, subplots (hours and sub-subplots (seasons. Except for Ta and RH, the Tg (24.73, 26.41ºC, Ws (3.16, 4.57 m s-1, Black globe-humidity index (BGHI (71.83, 73.84, Thermal load index (TLI (74.53, 76.11 and Radiant thermal load (RTL (526.46, 595.80 W m-2, respectively for SP and WS

  7. Influence of shading on container-grown flowering dogwoods

    Science.gov (United States)

    Bare root dogwoods can be successfully grown when transplanted into a container production system. Shade treatments regardless of color or density did have an effect on the plant growth of Cherokee Brave™ and Cherokee Princess dogwood. Plants grown under 50% black and 50% white shade had more heigh...

  8. Movable air solar collector and its efficiency

    International Nuclear Information System (INIS)

    Lauva, A.; Aboltinš, A.; Palabinskis, J.; Karpova Sadigova, N.

    2008-01-01

    Implementing the guidelines of the Latvian National Programme for Energy in the field of alternative energy, intensive research shall be carried on regarding the use of solar energy, as it can be successfully used not only for the purposes of water heating and production of electrical energy, but also for air warming. The amount of heat necessary for the drying of rough forage and grain drying by active aeration in June, July and August can be obtained using solar radiation. The Latvian Guidelines for the Energy Development 2006-2016 state that the solar radiance in Latvia is of quite low intensity. The total amount of solar energy is 1109 kWh m -2 per year. The period of usage of the solar thermal energy is beginning from the last decade of April, when the intensity of radiation is 120 kWh m -2 , until the first decade of September. Within this period (approximately 1800 hours), it is possible to use the solar thermal energy by placing solar collectors. The usage of solar collectors for in drying of agricultural production is topical from the viewpoint of decreasing the consumption of energy used for the drying, as electrical energy and fossil energy resources become more expensive and tend to run out. In the processes that concern drying of agricultural production, efficiently enough solar radiation energy can be used. Due to this reason researching continues and expands in the field of usage of solar energy for the processes of drying and heating. The efficiency factor of the existing solar collectors is not high, but they are of simple design and cheep for production and exploitation. By improving the design of the solar collectors and choosing modern materials that absorb the solar radiation energy, it is possible the decrease the efficiency factor of solar collectors and decrease the production costs. In the scientific laboratory of grain drying and storage of Latvia University of Agriculture, a pilot device movable folding solar collector pilot device

  9. Analysis of movable bus stop boarding and alighting areas.

    Science.gov (United States)

    2013-05-01

    This study explored the feasibility of using movable and reusable boarding and alighting (B&A) pads at bus stops. : Potential design alternatives in terms of materials and structural support for these pads were evaluated. The review : focused on the ...

  10. Shade tree diversity and aboveground carbon stocks in Theobroma cacao agroforestry systems: implications for REDD+ implementation in a West African cacao landscape.

    Science.gov (United States)

    Dawoe, Evans; Asante, Winston; Acheampong, Emmanuel; Bosu, Paul

    2016-12-01

    The promotion of cacao agroforestry is one of the ways of diversifying farmer income and creating incentives through their inclusion in REDD+ interventions. We estimated the aboveground carbon stocks in cacao and shade trees, determined the floristic diversity of shade trees and explored the possibility of implementing REDD+ interventions in cacao landscapes. Using replicated multi-site transect approach, data were collected from nine 1-ha plots established on 5 km long transects in ten cacao growing districts in Ghana West Africa. Biomass of cacao and shade trees was determined using allometric equations. One thousand four hundred and one (1401) shade trees comprising 109 species from 33 families were recorded. Total number of species ranged from 34 to 49. Newbouldia laevis (Bignoniacea) was the most frequently occurring specie and constituted 43.2 % of all shade trees. The most predominant families were Sterculiaceae and Moraceae (10 species each), followed by Meliaceae and Mimosaceae (8 species each) and Caesalpiniacaea (6 species). Shannon diversity indices (H', H max and J') and species richness were low compared to other similar studies. Shade tree densities ranged from 16.2 ± 3.0 to 22.8 ± 1.7 stems ha -1 and differed significantly between sites. Carbon stocks of shade trees differed between sites but were similar in cacao trees. The average C stock in cacao trees was 7.45 ± 0.41 Mg C ha -1 compared with 8.32 ± 1.15 Mg C ha -1 in the shade trees. Cacao landscapes in Ghana have the potential of contributing to forest carbon stocks enhancement by increasing the stocking density of shade trees to recommended levels.

  11. Improved grazing activity of dairy heifers in shaded tropical grasslands

    Directory of Open Access Journals (Sweden)

    Andréia Cristina Tavares de Mello

    Full Text Available ABSTRACT: Trees in the production systems can effectively reduce hot weather-induced stress in the Brazilian Midwest. High temperatures cause changes in animals daily routine, and trees into pastures can promote benefits. The aim of this research was to evaluate the behavior of dairy heifers in silvopastoral systems in the state of Mato Grosso, Brazil. A herd of 24 crossbreed heifers (3/4 and 7/8 Holstein/Zebu, 350kg average weight, was evaluated over three seasons. Piatã grass was managed under three shade levels: full-sun, moderate-shade, and intensive-shade provided by 10 to 12m high Eucalyptus trees. Behavior data were collected every 15 minutes from 8:30h to 16h. Shade availability significantly impacted heifer behavior, mainly affecting grazing frequency and time during the hottest hours. Grazing behavior was affected by shade levels during the different seasons. Heifers showed preferred grazing times. Heifers in the intensive-shade system visited shady areas during the hottest hours throughout the seasons. Heifers in the full sun-system avoided grazing during the warmer times, ceasing feeding activities. Our results from the Brazilian Midwest showed that shade availability causes breed heifers to change their daily routine.

  12. Influence of Shading on Cooling Energy Demand

    Science.gov (United States)

    Rabczak, Sławomir; Bukowska, Maria; Proszak-Miąsik, Danuta; Nowak, Krzysztof

    2017-10-01

    The article presents an analysis of the building cooling load taking into account the variability of the factors affecting the size of the heat gains. In order to minimize the demand for cooling, the effect of shading elements installed on the outside on the windows and its effect on size of the cooling capacity of air conditioning system for the building has been estimated. Multivariate building cooling load calculations to determine the size of the reduction in cooling demand has derived. Determination of heat gain from the sun is laborious, but gives a result which reflects the influence of the surface transparent partitions, devices used as sunscreen and its location on the building envelope in relation to the world, as well as to the internal heat gains has great attention in obtained calculation. In this study, included in the balance sheet of solar heat gains are defined in three different shading of windows. Calculating the total demand cooling is made for variants assuming 0% shading baffles transparent, 50% shading baffles transparent external shutters at an angle of 45 °, 100% shading baffles transparent hours 12 from the N and E and from 12 from the S and W of the outer slat blinds. The calculation of the average hourly cooling load was taken into account the option assuming the hypothetical possibility of default by up to 10% of the time assumed the cooling season temperatures in the rooms. To reduce the consumption of electricity energy in the cooling system of the smallest variant identified the need for the power supply for the operation of the cooling system. Also assessed the financial benefits of the temporary default of comfort.

  13. PowerShades. Transparent photovoltaics and solar shading. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bezzel, E. (PhotoSolar ApS, Taastrup (Denmark)); Univ. of Neuchatel, Institute of Microtechnology, Neuchatel (CH)); Savcor Denmark A/S, Ballerup (Denmark)); Chem-Tec Plating A/S, Uldum (Denmark)); Danish Technological Institute (DTI), Taastrup (Denmark))

    2008-06-15

    This report marks the end of the PSO funded R and D project PowerShades. The objective of the project has been to establish knowledge about the manufacturing of PowerShade transparent photovoltaics and to demonstrate the viability of PowerShade, both as a product and when considered a building element. It has not been the objective to demonstrate a full-scale manufacturing of PowerShade, but to establish the knowledge that enables industrial manufacturing. The overall objective of the project has been achieved, and the large majority of the milestones defined have been met to full extent. It has been shown that PowerShade photovoltaic cells with an electrical efficiency of 5% can be reached, and it is expected that future work will lead to even better efficiency. Also, it has been demonstrated by full size side by side comparison that PowerShade transparent photovoltaics may replace exterior solar shading devices without compromise to the thermal properties of the building. The project has identified a number of work areas that must be addressed before an industrial manufacturing can be established. The efficiency of the photovoltaic generator must be increased and the stability of the entire product documented. Also, some of the identified processing steps must be scaled in capacity before manufacturing can be considered. (author)

  14. Evaluation of an optimized shade guide made from porcelain powder mixtures.

    Science.gov (United States)

    Wang, Peng; Wei, Jiaqiang; Li, Qing; Wang, Yining

    2014-12-01

    Color errors associated with current shade guides and problems with color selection and duplication are still challenging for restorative dentists. The purpose of this study was to evaluate an optimized shade guide for visual shade duplication. Color distributions (L*, a*, and b*) of the maxillary left central incisors of 236 participants, whose ages ranged from 20 to 60, were measured with a spectrophotometer. Based on this color map, an optimized shade guide was designed with 14 shade tabs evenly distributed within the given color range of the natural incisors. The shade tabs were fabricated with porcelain powder mixtures and conventional laboratory procedures. A comparison of shade duplication by using the optimized and Vitapan Classical shade guides was conducted. Thirty Chinese participants were involved, and the colors of the left maxillary incisors were selected by using 2 shade guides. Metal ceramic crowns were fabricated according to the results of the shade selection. The colors of the shade tabs, natural teeth, and the ceramic crowns were measured with a spectrophotometer. The color differences among the natural teeth, the shade tabs, and the corresponding metal ceramic crowns were calculated and analyzed (α=.017). Significant differences were found in both phases of shade determination and shade duplication (P<.017). The total number of color errors with the optimized shade guide was 3.5, which was significantly less than that of Vitapan, 5.1 (P<.001). The optimized shade guide system improved performance not only in the color selection phase but also in the color of the fabricated crowns. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  15. Photovoltaic Shading Testbed for Module-Level Power Electronics

    Energy Technology Data Exchange (ETDEWEB)

    Deline, C.; Meydbray, J.; Donovan, M.; Forrest, J.

    2012-05-01

    This document describes a repeatable test procedure that attempts to simulate shading situations, as would be experienced by typical residential rooftop photovoltaic (PV) systems. This type of shading test is particularly useful to evaluate the impact of different power conversion setups, including microinverters, DC power optimizers and string inverters, on overall system performance. The performance results are weighted based on annual estimates of shade to predict annual performance improvement. A trial run of the test procedure was conducted with a side by side comparison of a string inverter with a microinverter, both operating on identical 8kW solar arrays. Considering three different shade weighting conditions, the microinverter was found to increase production by 3.7% under light shading, 7.8% under moderate shading, and 12.3% under heavy shading, relative to the reference string inverter case. Detail is provided in this document to allow duplication of the test method at different test installations and for different power electronics devices.

  16. A Hybrid Maximum Power Point Tracking Approach for Photovoltaic Systems under Partial Shading Conditions Using a Modified Genetic Algorithm and the Firefly Algorithm

    Directory of Open Access Journals (Sweden)

    Yu-Pei Huang

    2018-01-01

    Full Text Available This paper proposes a modified maximum power point tracking (MPPT algorithm for photovoltaic systems under rapidly changing partial shading conditions (PSCs. The proposed algorithm integrates a genetic algorithm (GA and the firefly algorithm (FA and further improves its calculation process via a differential evolution (DE algorithm. The conventional GA is not advisable for MPPT because of its complicated calculations and low accuracy under PSCs. In this study, we simplified the GA calculations with the integration of the DE mutation process and FA attractive process. Results from both the simulation and evaluation verify that the proposed algorithm provides rapid response time and high accuracy due to the simplified processing. For instance, evaluation results demonstrate that when compared to the conventional GA, the execution time and tracking accuracy of the proposed algorithm can be, respectively, improved around 69.4% and 4.16%. In addition, in comparison to FA, the tracking speed and tracking accuracy of the proposed algorithm can be improved around 42.9% and 1.85%, respectively. Consequently, the major improvement of the proposed method when evaluated against the conventional GA and FA is tracking speed. Moreover, this research provides a framework to integrate multiple nature-inspired algorithms for MPPT. Furthermore, the proposed method is adaptable to different types of solar panels and different system formats with specifically designed equations, the advantages of which are rapid tracking speed with high accuracy under PSCs.

  17. NMOS-Based Integrated Modular Bypass for Use in Solar Systems (NIMBUS: Intelligent Bypass for Reducing Partial Shading Power Loss in Solar Panel Applications

    Directory of Open Access Journals (Sweden)

    Pieter Bauwens

    2016-06-01

    Full Text Available NMOS-based Integrated Modular Bypass for Use in Solar systems (NIMBUS is designed as a replacement for the traditional bypass diode, used in common solar panels. Because of the series connection between the individual solar cells, the power output of a photovoltaic (PV panel will drop disproportionally under partial shading. Currently, this is solved by dividing the PV panel into substrings, each with a diode bypass placed in parallel. This allows an alternative current path. However, the diodes still have a significant voltage drop (about 350 mV, and due to the fairly large currents in a panel, the diodes are dissipating power that we would rather see at the output of the panel. The NIMBUS chip, being a low-voltage-drop switch, aims to replace these diodes and, thus, reduce that power loss. NIMBUS is a smart bypass: a completely stand-alone system that detects the failing of one or more cells and activates when necessary. It is designed for a 100-mV voltage drop under a 5-A load current. When two or more NIMBUS chips are placed in parallel, an internal synchronization circuit ensures proper operation to provide for larger load currents. This paper will elaborate on the operation, design and implementation of the NIMBUS chip, as well as on the first measurements.

  18. Typology of building shading elements on Jalan Sudirman corridor in Pekanbaru

    Science.gov (United States)

    Faisal, G.; Aldy, P.

    2016-04-01

    In 2013, temperature in Pekanbaru was between 22.60°C and 34.6°C with humidity 79.14 percent. This condition has increase the concern of energy utilization to building comfort. Buildings have the biggest energy consuming due to the use of air conditioner in Pekanbaru. One effort to reduced energy is shading devices application. Application of air conditioner need huge energy, replaced natural circulation with architecture elements to reduced building thermal. This research study about system and building shading devices types that influence building thermal in Pekanbaru so that knowing characteristics and elements form. This study aims to determine and identify of systems and building elements types in Pekanbaru, which the element forms to conquer in climate condition. Qualitative method with rationalistic-paradigm has used to identify typology of building shading devices on Jalan Sudirman corridor. The research orientation on typology theory, thermal theory, and building shading device to identification of building shading device types on Jalan Sudirman corridor. Based on the survey result, there are 2 type of building shading devices on Jalan Sudirman Pekanbaru which is based on forms and quantity of shading. The types are building shading devices based on shading quantity and building shading devices based on shading forms.

  19. Selecting Landscape Plants: Shade Trees

    OpenAIRE

    Relf, Diane; Appleton, Bonnie Lee, 1948-2012; Close, David

    2015-01-01

    Because of the permanency of trees and their importance in the landscape, care must be taken to select the best species for each situation. This publication goes over how to choose landscape trees that are shade tolerant.

  20. Concept Design of Movable Beam of Hydraulic Press

    Directory of Open Access Journals (Sweden)

    Li Yancong

    2017-01-01

    Full Text Available The hydraulic press movable beam is one of the key components of the hydraulic press; its design quality impacts the accuracy of the workpiece that the press suppressed. In this paper, first, with maximum deflection and material strength as constraints, mechanical model of the movable beam is established; next, the concept design model of the moveable beam structure is established; the relationship among the force of the side cylinder, the thickness of the inclined plate, outer plate is established also. Taking movable beam of the 100MN type THP10-10000 isothermal forging hydraulic press as an example, the conceptual design result is given. This concept design method mentoned in the paper has general meaning and can apply to other similar product design.

  1. Composite shade guides and color matching.

    Science.gov (United States)

    Paolone, Gaetano; Orsini, Giovanna; Manauta, Jordi; Devoto, Walter; Putignano, Angelo

    2014-01-01

    Finding reliable systems that can help the clinician match the color of direct composite restorations is often an issue. After reviewing several composite shade guides available on the market and outlining their main characteristics and limits (unrealistic specimen thickness, not made with the same material the clinician will use, only a few allow to overlap enamel tabs on dentin ones), the authors evaluated the reliability of a system designed to produce self-made standardized "tooth-shaped" shade guide specimens. Small changes in composite enamel thickness may determine huge differences in esthetic outcomes. In conclusion, the results showed that all the specimens demonstrated comparable enamel thickness in all the examined areas (cervical, middle, incisal).

  2. On the Impact of Partial Shading on PV Output Power

    DEFF Research Database (Denmark)

    Sera, Dezso; Baghzouz, Yahia

    2008-01-01

    clarifies the mechanism of partial PV shading on a number of PV cells connected in series and/or parallel with and without bypass diodes. The analysis is presented in simple terms and can be useful to someone who wishes to determine the impact of some shading geometry on a PV system. The analysis...... is illustrated by measurements on a commercial 70 W panel, and a 14.4 kW PV array....

  3. The link between Movability Number and Incipient Motion in river ...

    African Journals Online (AJOL)

    This allowed for a firmer definition of Incipient Motion as well as a new bedload transportation equation. Additional laboratory experimentation for Particle Reynolds number over the range 0.12-486 facilitated the improved prediction of Incipient Motion from a plot of the critical Movability Number vs. Particle Reynolds number ...

  4. Enhancement of a stand-alone photovoltaic system's performance: Reduction of soft and hard shading

    Energy Technology Data Exchange (ETDEWEB)

    Lamont, Lisa A.; El Chaar, Lana [Petroleum Institute, Electrical Engineering Department, P.O. Box 2533, Abu Dhabi (United Arab Emirates)

    2011-04-15

    A stand-alone photovoltaic (PV) system is the most promising solution to supply electric power to meet energy demand in isolated locations. This technology can offer an interesting alternative to other currently existing sources of energy. Due to space constraint in the remote offshore oil and gas industry, a stand-alone system is used for cathodic protection, telemetry and valve control. However in such an environment, dust accumulation and bird droppings have been critical issues to the operation of off-grid solar devices. These factors do not only reduce the available power of the modules but also makes the cost of solar devices ineffective since cleaning, especially on well-head towers, is very expensive due to the location. Hence this paper presents two technical solutions that have shown promising results in reducing the impact of these factors. (author)

  5. A Study of a Two Stage Maximum Power Point Tracking Control of a Photovoltaic System under Partially Shaded Insolation Conditions

    Science.gov (United States)

    Kobayashi, Kenji; Takano, Ichiro; Sawada, Yoshio

    A photovoltaic array shows relatively low output power density, and has a greatly drooping Current-Voltage (I-V) characteristic. Therefore, Maximum Power Point Tracking (MPPT) control is used to maximize the output power of the array. Many papers have been reported in relation to MPPT. However, the Current-Power (I-P) curve sometimes shows multi-local maximum points mode under non-uniform insolation conditions. The operating point of the PV system tends to converge to a local maximum output point which is not the real maximal output point on the I-P curve. Some papers have been also reported, trying to avoid this difficulty. However most of those control systems become rather complicated. Then, the two stage MPPT control method is proposed in this paper to realize a relatively simple control system which can track the real maximum power point even under non-uniform insolation conditions. The feasibility of this control concept is confirmed for steady insolation as well as for rapidly changing insolation by simulation study using software PSIM and LabVIEW. In addition, simulated experiment confirms fundament al operation of the two stage MPPT control.

  6. A study of a two stage maximum power point tracking control of a photovoltaic system under partially shaded insolation conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Kenji; Takano, Ichiro; Sawada, Yoshio [Kogakuin University, Tokyo 163-8677 (Japan)

    2006-11-23

    A photovoltaic (PV) array shows relatively low output power density, and has a greatly drooping current-voltage (I-V) characteristic. Therefore, maximum power point tracking (MPPT) control is used to maximize the output power of the PV array. Many papers have been reported in relation to MPPT. However, the current-power (I-P) curve sometimes shows multi-local maximum point mode under non-uniform insolation conditions. The operating point of the PV system tends to converge to a local maximum output point which is not the real maximal output point on the I-P curve. Some papers have been also reported, trying to avoid this difficulty. However, most of those control systems become rather complicated. Then, the two stage MPPT control method is proposed in this paper to realize a relatively simple control system which can track the real maximum power point even under non-uniform insolation conditions. The feasibility of this control concept is confirmed for steady insolation as well as for rapidly changing insolation by simulation study using software PSIM and LabVIEW. (author)

  7. Effect of shade on photosynthetic pigments in the tropical root crops: yam, taro, tannia, cassava and sweet potato

    International Nuclear Information System (INIS)

    Johnston, M.; Onwueme, I.C.

    1998-01-01

    Plants of yam, taro, tannia, cassava and sweet potato were raised under shade or in full sunlight and the effect of shade on leaf chlorophyll and carotenoids was examined to determine and compare the relative shade tolerance and adaptability of the var ious species. All five species of root crops adapted to shade. The chlorophyll concentration was higher, while the chlorophyll a:b ratio, carotenoids per unit chlorophyll and the weight per unit area of leaf were lower in the shade than in the sun in yam, tannia, taro, cassava and sweet potato. All species had larger leaves and more chlorophyll per leaf in the shade. The extent of the changes, however, differed between species. The aroids (taro and tannia) appeared to be shade-tolerant species as their chlorophyll a:b ratios changed less than those of the other species in the shade, suggesting that their light-harvesting systems may be normally adapted to shade conditions. Taro and tannia also adapted to shade by a greater proportional increase in leaf size, a smaller reduction in leaf weight per unit area and a greater proportional increase in chlorophyll and carotenoids per leaf than the other species. Yam compensated for shade by having a large proportional increase in leaf size and appeared to be moderately tolerant of shade. Sweet potato and cassava appeared to be the least tolerant of shade of the major tropical root crops. (author)

  8. The impact of translucent fabric shades and control strategies on energy savings and visual quality

    Science.gov (United States)

    Wankanapon, Pimonmart

    Translucent fabric shades provide opportunities for building occupants to control sunlight penetration for heat reduction, thermal comfort, and visual quality. Regulating shades affects building energy and can potentially reduce the size of mechanical cooling systems. Shades are not normally included in energy model studies during the design process, even though shades potential impact energy use. This is because the occupants normally leave shades closed a large fraction of the time, but models are generally performed with no shades. Automatic shade control is now available, so it is necessary to understand the impact of shades on visual quality and their energy saving potential in order to optimize their overall performance. There are very limited studies that have address shades and their integrated performance on energy consumption and visual quality. Most of these do not reflected modern shade types and their application. The goals of this study are: First, to determine the impact of shades on total, heating, cooling and lighting energy savings with different design and operation parameters. Second, to study and develop different automatic shade control strategies to promote and optimize energy savings and visual quality. A simulation-based approach using EnergyPlus in a parametric study provide better understanding energy savings under different shade conditions. The parametric runs addressed various building parameters such as geometry, orientation, site climate, glazing/shade properties, and shade control strategies with integrated lighting control. The impact of shades was determined for total building and space heating, cooling and lighting energy savings. The effect of shades on visual quality was studied using EnergyPlus, AGI32 and DAYSIM for several indices such as daylight glare index (DGI), work plane illuminance, luminance ratios and view. Different shade control strategies and integrated lighting control were considered with two translucent fabric

  9. Design and characteristics of the drive mechanism for movable limiters of JT-60, (1)

    International Nuclear Information System (INIS)

    Takashima, Tetsuo; Morishita, Osamu; Yamamoto, Masahiro; Shimizu, Masatsugu; Ohta, Mitsuru

    1976-10-01

    Two fast-acting movable rail limiters will be installed in a large Tokamak JT-60 being designed in JAERI. The movable limiter consists of a drive mechanism, a vacuum seal, a bearing, and a molybdenum rail limiter. Design of the drive mechanism for the movable limiter and experimental results on the driving characteristics in full scale are described. (auth.)

  10. Efficient Methods for Fast Shading

    Directory of Open Access Journals (Sweden)

    ROMANYUK, A.

    2008-06-01

    Full Text Available On devices without battery consuming and specialized hardware for rendering, it is important to improve the speed and quality so that these methods are suitable for real-time rendering. Furthermore such algorithms are needed on the coming multicore architectures. We show how the methods by Gouraud and Phong, the commonly most used methods for shading, can be improved and made faster for both software rendering as well as simple low energy consuming hardware implementations. Moreover, this paper summarizes the authors' achievements in increasing shading speed and performance and a Bidirectional Reflectance Distribution Function is simplified for faster computing and hardware implementation.

  11. Movable chain jacks and winches: case study of PETROBRAS' P58/)62and ENI's Goliat

    Energy Technology Data Exchange (ETDEWEB)

    Grindheim, Reidar [Aker Pusnes AS, Arendal (Norway)

    2012-07-01

    Recently, Aker Solutions delivered a movable chain jack system to PETROBRAS's P58/P62 FPSOs and a movable windlass system to ENI's Goliat FPSO. This paper highlights the main differences between the two systems and when it is beneficial to employ movable systems. There are many parameters to consider in determining which system to use - also a traditional system involving a single winch or chain jack per mooring line may in many cases be preferred. The movable chain jack concept is designed to operate multiple mooring lines within the same cluster. A single chain jack is lifted by a skidding gantry and moved to the next mooring line and so forth. Installation and messenger chains are moved using a large sliding chain locker allowing for later offloading of the surplus chain. The movable windlass system is also designed to operate multiple mooring lines within the same cluster. However, in this case the winch is rotary and can operate via electric or hydraulic power. One of the main considerations is to move the windlass and keep the mooring lines intact without cutting them. (author)

  12. Evaluation of different shades to improve dairy cattle well-being in Argentina

    Science.gov (United States)

    Valtorta, S. E.; Leva, Perla E.; Gallardo, Miriam R.

    Two tree shades (TS1 and TS2) and an artificial shade structure (AS) were evaluated using black globe temperatures (BGTs) to assess their effectiveness in reducing heat load. The artificial structure consisted of a black woven polypropylene cloth providing 80% shade, mounted on 2.5-m-high eucalyptus posts. The work was carried out at Rafaela Experimental Station, Argentina, during the summer (January and February) 1994. BGTs and floor temperatures were measured in concrete floor holding pens with and without artifical shade. The results showed no difference between TS1, TS2 and AS, their average BGTs being 30.2 (SD 0.58), 29.0 (SD 0.70) and 30.2 (SD 0.74)°C, respectively. BGTs under all three shades were significantly lower (Pcows were recorded twice a week. Rectal temperatures were significantly higher for non-shaded cows (Ptree and artificial shades produced similar effects, (2) shading the holding pen with an 80% shading cloth was effective in reducing heat load and floor temperatures, and (3) access to shade in our pasture-based system improved animal well-being.

  13. Root biomass, turnover and net primary productivity of a coffee agroforestry system in Costa Rica: effects of soil depth, shade trees, distance to row and coffee age.

    Science.gov (United States)

    Defrenet, Elsa; Roupsard, Olivier; Van den Meersche, Karel; Charbonnier, Fabien; Pastor Pérez-Molina, Junior; Khac, Emmanuelle; Prieto, Iván; Stokes, Alexia; Roumet, Catherine; Rapidel, Bruno; de Melo Virginio Filho, Elias; Vargas, Victor J; Robelo, Diego; Barquero, Alejandra; Jourdan, Christophe

    2016-08-21

    In Costa Rica, coffee (Coffea arabica) plants are often grown in agroforests. However, it is not known if shade-inducing trees reduce coffee plant biomass through root competition, and hence alter overall net primary productivity (NPP). We estimated biomass and NPP at the stand level, taking into account deep roots and the position of plants with regard to trees. Stem growth and root biomass, turnover and decomposition were measured in mixed coffee/tree (Erythrina poeppigiana) plantations. Growth ring width and number at the stem base were estimated along with stem basal area on a range of plant sizes. Root biomass and fine root density were measured in trenches to a depth of 4 m. To take into account the below-ground heterogeneity of the agroforestry system, fine root turnover was measured by sequential soil coring (to a depth of 30 cm) over 1 year and at different locations (in full sun or under trees and in rows/inter-rows). Allometric relationships were used to calculate NPP of perennial components, which was then scaled up to the stand level. Annual ring width at the stem base increased up to 2·5 mm yr -1 with plant age (over a 44-year period). Nearly all (92 %) coffee root biomass was located in the top 1·5 m, and only 8 % from 1·5 m to a depth of 4 m. Perennial woody root biomass was 16 t ha -1 and NPP of perennial roots was 1·3 t ha -1 yr -1 Fine root biomass (0-30 cm) was two-fold higher in the row compared with between rows. Fine root biomass was 2·29 t ha -1 (12 % of total root biomass) and NPP of fine roots was 2·96 t ha -1 yr -1 (69 % of total root NPP). Fine root turnover was 1·3 yr -1 and lifespan was 0·8 years. Coffee root systems comprised 49 % of the total plant biomass; such a high ratio is possibly a consequence of shoot pruning. There was no significant effect of trees on coffee fine root biomass, suggesting that coffee root systems are very competitive in the topsoil. © The Author 2016. Published by Oxford University Press on

  14. Assessment of microclimate conditions under artificial shades in a ginseng field.

    Science.gov (United States)

    Lee, Kyu Jong; Lee, Byun-Woo; Kang, Je Yong; Lee, Dong Yun; Jang, Soo Won; Kim, Kwang Soo

    2016-01-01

    Knowledge on microclimate conditions under artificial shades in a ginseng field would facilitate climate-aware management of ginseng production. Weather data were measured under the shade and outside the shade at two fields located in Gochang-gun and Jeongeup-si, Korea, in 2011 and 2012 seasons to assess temperature and humidity conditions under the shade. An empirical approach was developed and validated for the estimation of leaf wetness duration (LWD) using weather measurements outside the shade as inputs to the model. Air temperature and relative humidity were similar between under the shade and outside the shade. For example, temperature conditions favorable for ginseng growth, e.g., between 8°C and 27°C, occurred slightly less frequently in hours during night times under the shade (91%) than outside (92%). Humidity conditions favorable for development of a foliar disease, e.g., relative humidity > 70%, occurred slightly more frequently under the shade (84%) than outside (82%). Effectiveness of correction schemes to an empirical LWD model differed by rainfall conditions for the estimation of LWD under the shade using weather measurements outside the shade as inputs to the model. During dew eligible days, a correction scheme to an empirical LWD model was slightly effective (10%) in reducing estimation errors under the shade. However, another correction approach during rainfall eligible days reduced errors of LWD estimation by 17%. Weather measurements outside the shade and LWD estimates derived from these measurements would be useful as inputs for decision support systems to predict ginseng growth and disease development.

  15. The Registration of Special Notarial Bonds under the Security by Means of Movable Property Act and the Publicity Principle: Lessons from Developments in Belgium

    Directory of Open Access Journals (Sweden)

    Lefa

    2018-01-01

    Full Text Available Many people do not own immovable property to offer as security but do have movable property which can be offered as security for the repayment of a debt. In today's world, where the costs of a motor car can exceed that of a house, the increasing value of movable things makes them popular and appropriate security objects. Under the common law pledge, delivery of the movable property from the pledgor (the debtor to the pledgee (the creditor has to take place in order for the pledgee to acquire a real security right in the property. Delivery of the property is aimed at ensuring compliance with the publicity principle. The principle of publicity entails that the existence of a real security must be known to the public. With the aim of promoting commerce, certain countries have taken the initiative in reforming their laws on pledge to allow the debtor to retain possession of the movable property that serves as security. Furthermore, technology has advanced to a level where national registration systems which can be accessed easily and at minimal cost can be established. The South African legislature enacted the Security by Means of Movable Property Act 57 of 1993 which makes provision for a pledge without possession. This Act deemed a duly registered notarial bond over specified movable property to have been delivered as if delivery had in fact taken place, thereby substituting the common law delivery requirement with registration in the Deeds Office. On 30 May 2013 the Belgian House of Representatives adopted a Belgian Pledge Act which allows for a non-possessory pledge on movable property subject to registration in a newly created public register called the Electronic Pledge Register. This article therefore examines the efficacy of the registration system of special notarial bonds in South African law and whether this form of registration complies with the publicity principle looking at the developments of a computerised registration system taking

  16. Cacao Cultivation under Diverse Shade Tree Cover Allows High Carbon Storage and Sequestration without Yield Losses.

    Science.gov (United States)

    Abou Rajab, Yasmin; Leuschner, Christoph; Barus, Henry; Tjoa, Aiyen; Hertel, Dietrich

    2016-01-01

    One of the main drivers of tropical forest loss is their conversion to oil palm, soy or cacao plantations with low biodiversity and greatly reduced carbon storage. Southeast Asian cacao plantations are often established under shade tree cover, but are later converted to non-shaded monocultures to avoid resource competition. We compared three co-occurring cacao cultivation systems (3 replicate stands each) with different shade intensity (non-shaded monoculture, cacao with the legume Gliricidia sepium shade trees, and cacao with several shade tree species) in Sulawesi (Indonesia) with respect to above- and belowground biomass and productivity, and cacao bean yield. Total biomass C stocks (above- and belowground) increased fivefold from the monoculture to the multi-shade tree system (from 11 to 57 Mg ha-1), total net primary production rose twofold (from 9 to 18 Mg C ha-1 yr-1). This increase was associated with a 6fold increase in aboveground biomass, but only a 3.5fold increase in root biomass, indicating a clear shift in C allocation to aboveground tree organs with increasing shade for both cacao and shade trees. Despite a canopy cover increase from 50 to 93%, cacao bean yield remained invariant across the systems (variation: 1.1-1.2 Mg C ha-1 yr-1). The monocultures had a twice as rapid leaf turnover suggesting that shading reduces the exposure of cacao to atmospheric drought, probably resulting in greater leaf longevity. Thus, contrary to general belief, cacao bean yield does not necessarily decrease under shading which seems to reduce physical stress. If planned properly, cacao plantations under a shade tree cover allow combining high yield with benefits for carbon sequestration and storage, production system stability under stress, and higher levels of animal and plant diversity.

  17. LOCAL COMMUNITY’S ECOLOGICAL KNOWLEDGE IN THE SELECTION OF SHADING TREESFOR TRADITIONAL AGROFORESTRY SYSTEM (NUTMEG “DUSUNG” IN AMBON

    Directory of Open Access Journals (Sweden)

    Messalina Lovenia Salampessy

    2017-04-01

    Full Text Available Local ecological knowledge is closely linked to decision-making process for planting tree. The aims of this study are to describe and explain local community’s decision-making process in the selection of shading trees on their lands according to their understanding and knowledge. This study used case study approach. Data was collected through in-depth interviews and observations. The results of the study showed that to manage traditional agroforestry, the community planted nutmeg (Myristica fragrans as the main crop species and selected the covering trees, such as walnuts (Canarium sp. and durian (Durio sp.. The reasons in selecting shading trees were as follows: the suitability of biophysical condition; supporting nutmeg growth; ease of maintenance and harvesting activities; parental inheritance; yield diversity; and ease of marketing activities. Learning from the study, the government and relevant stakeholders are expected touse local ecological knowledge to support the development of community forestry.

  18. Arbuscular mycorrhizal fungi associated with shade trees and Coffea arabica L. in a coffee-based agroforestry system in Bonga, Southwestern Ethiopia

    OpenAIRE

    Sewnet ,Tadesse Chanie; Tuju, Fassil Assefa

    2013-01-01

    In a first step to understand the interactions between Coffea arabica L. trees and mycorrhizae in Ethio¬pia, an investigation of the current mycorrhizal colonization status of roots was undertaken. We sampled 14 shade tree species occurring in coffee populations in Bonga forest, Ethiopia. Milletia fer¬ruginea, Schefflera abyssinica, Croton macrostachyus, Ficus vasta, F. sur, Albizia gummifera, Olea capensis, Cordia africana, Ehretia abyssinica, Pouteria adolfi-friederici, Pavetta oliveriana, ...

  19. Rotor for processing liquids using movable capillary tubes

    Science.gov (United States)

    Johnson, W.F.; Burtis, C.A.; Walker, W.A.

    1987-07-17

    A rotor assembly for processing liquids, especially whole blood samples, is disclosed. The assembly includes apparatus for separating non-liquid components of whole blood samples from liquid components, apparatus for diluting the separated liquid component with a diluent and apparatus for transferring the diluted sample to an external apparatus for analysis. The rotor assembly employs several movable capillary tubes to handle the sample and diluents. A method for using the rotor assembly to process liquids is also described. 5 figs.

  20. A Movable Phantom Design for Quantitative Evaluation of Motion Correction Studies on High Resolution PET Scanners

    DEFF Research Database (Denmark)

    Olesen, Oline Vinter; Svarer, C.; Sibomana, M.

    2010-01-01

    maximization algorithm with modeling of the point spread function (3DOSEM-PSF), and they were corrected for motions based on external tracking information using the Polaris Vicra real-time stereo motion-tracking system. The new automatic, movable phantom has a robust design and is a potential quality......Head movements during brain imaging using high resolution positron emission tomography (PET) impair the image quality which, along with the improvement of the spatial resolution of PET scanners, in general, raises the importance of motion correction. Here, we present a new design for an automatic...

  1. Fiber optics welder having movable aligning mirror

    Science.gov (United States)

    Higgins, Robert W.; Robichaud, Roger E.

    1981-01-01

    A system for welding fiber optic waveguides together. The ends of the two fibers to be joined together are accurately, collinearly aligned in a vertical orientation and subjected to a controlled, diffuse arc to effect welding and thermal conditioning. A front-surfaced mirror mounted at a 45.degree. angle to the optical axis of a stereomicroscope mounted for viewing the junction of the ends provides two orthogonal views of the interface during the alignment operation.

  2. OpenGL 4 shading language cookbook

    CERN Document Server

    Wolff, David

    2013-01-01

    OpenGL Shading Language 4 Cookbook is a hands-on guide that gets straight to the point - actually creating graphics, instead of just theoretical learning. Each recipe is specifically tailored to satisfy your appetite for producing real-time 3-D graphics using the latest GLSL specification.This book is for OpenGL programmers looking to use the modern features of GLSL 4 to create real-time, three-dimensional graphics. Familiarity with OpenGL programming, along with the typical 3D coordinate systems, projections, and transformations is assumed. It can also be useful for experienced GLSL programme

  3. Esthetics and shade communication: a practical approach.

    Science.gov (United States)

    Hegenbarth, Ernst A

    2006-01-01

    Accurate shade analysis and communication represent one of the biggest challenges in restorative and esthetic dentistry today, especially in light of the rapidly increasing array of ceramic materials available. Traditional methods of shade analysis have relied upon the use of conventional shade guides or, more recently, digital shade measurement. In this article, the author examines the advantages and disadvantages of traditional shade analysis; reviews principles for optimizing the evaluation process, including information regarding the scientific basis of general color science, optics, and aspects of material science; and proposes a six-step approach to shade analysis in which less emphasis is placed on shade guide samples in favor of natural internal structures and surface properties and their replication in different dentin, enamel, transparent, and colored translucent, as well as fluorescent and opalescent, ceramics.

  4. Optimising building net energy demand with dynamic BIPV shading

    International Nuclear Information System (INIS)

    Jayathissa, P.; Luzzatto, M.; Schmidli, J.; Hofer, J.; Nagy, Z.; Schlueter, A.

    2017-01-01

    Highlights: •Coupled analysis of PV generation and building energy using adaptive BIPV shading. •20–80% net energy saving compared to an equivalent static system. •The system can in some cases compensate for the entire heating/cooling/lighting load. •High resolution radiation simulation including impacts of module self shading. -- Abstract: The utilisation of a dynamic photovoltaic system for adaptive shading can improve building energy performance by controlling solar heat gains and natural lighting, while simultaneously generating electricity on site. This paper firstly presents an integrated simulation framework to couple photovoltaic electricity generation to building energy savings through adaptive shading. A high-resolution radiance and photovoltaic model calculates the photovoltaic electricity yield while taking into account partial shading between modules. The remaining solar irradiation that penetrates the window is used in a resistance-capacitance building thermal model. A simulation of all possible dynamic configurations is conducted for each hourly time step, of which the most energy efficient configuration is chosen. We then utilise this framework to determine the optimal orientation of the photovoltaic panels to maximise the electricity generation while minimising the building’s heating, lighting and cooling demand. An existing adaptive photovoltaic facade was used as a case study for evaluation. Our results report a 20–80% net energy saving compared to an equivalent static photovoltaic shading system depending on the efficiency of the heating and cooling system. In some cases the Adaptive Solar Facade can almost compensate for the entire energy demand of the office space behind it. The control of photovoltaic production on the facade, simultaneously with the building energy demand, opens up new methods of building management as the facade can control both the production and consumption of electricity.

  5. The effect of various disinfectants on dental shade guides.

    Science.gov (United States)

    Huang, Peterson Y; Masri, Radi; Romberg, Elaine; Driscoll, Carl F

    2014-09-01

    Dental shade guides are used to evaluate tooth color before prosthodontic procedures and are subjected to disinfection after use. The effect of disinfection on shade guides has not been thoroughly investigated. The purpose of this study was to evaluate the effect of disinfectants on the color of shade tabs. Changes in the color (ΔE) of VITA Classical Shade Guide tabs were measured with a VITA Easyshade spectrophotometer in the CIELAB system and calculated after being subjected to Cavicide, Asepticare TB, Sporicidin, and distilled water (control) over a simulated period of 2 years. Statistical analysis was accomplished by a 2-way analysis of variance followed by the Tukey honestly significant difference (HSD) test (α=.05). A significant difference was noted in the degree of shade tab color change, depending on the type of disinfectant used (F=153.2, PCavicide (ΔE=1.198). The average total CIELAB color difference for 50% human perceptibility is approximately 1 unit (under standardized laboratory conditions). In the oral cavity, however, an average change of 3.7 ΔE units could still allow teeth to be perceived as having the same color. Therefore, although the results are statistically significant, they may not be clinically important. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  6. Color Parameters of the Chromascop Shade Guide

    Directory of Open Access Journals (Sweden)

    William J. O'Brien

    2012-12-01

    Full Text Available The purposes of this study are: (1 determine the color of the twenty shades in the Ivoclar’s Chromascop shade guide, (2 determine the color representation of the shade guide described as coverage error (CE, and (3 compare this shade guide with the Vita Classical and Bioform shade guides. The spectral data was collected using Beckman model DU reflectance spectrophotometer equipped with an integrating sphere. Commission International de l’Eclairage (CIE chromaticity coordinates were calculated using CIE illuminant C and 1931 observer data, then converted to CIE L*a*b* and Munsell notation. Each shade was spectrophotometrically compared to the published colors of 335 human teeth. The minimum CIE L*a*b* color difference was calculated for each tooth and the average of these color differences was defined as the CE. The measured colors of the Chromascop guide had a CIE L* range of 79.67 to 65.61, an a* range of -0.71 to 3.85, and a b* range of 14.58 to 27.69. The average CE of the Chromascop shade guide was 3.38. The Chromascop shade guide has similar colors and a CE compared with the Bioform and Vita Classical shade guides, but with some shades of higher red and yellow components.

  7. Shade determination using camouflaged visual shade guides and an electronic spectrophotometer.

    Science.gov (United States)

    Kvalheim, S F; Øilo, M

    2014-03-01

    The aim of the present study was to compare a camouflaged visual shade guide to a spectrophotometer designed for restorative dentistry. Two operators performed analyses of 66 subjects. One central upper incisor was measured four times by each operator; twice with a camouflaged visual shade guide and twice with a spectrophotometer Both methods had acceptable repeatability rates, but the electronic shade determination showed higher repeatability. In general, the electronically determined shades were darker than the visually determined shades. The use of a camouflaged visual shade guide seems to be an adequate method to reduce operator bias.

  8. Design of movable fixed area γ dose rate monitor

    International Nuclear Information System (INIS)

    Li Dongyu; Cheng Wen; Li Jikai; Huang Hong; Shen Qiming; Zhang Qiang; Liu Zhengshan

    2005-10-01

    Movable fixed area γ dose rate monitor has not only the characteristics of fixed area γ dose rate monitor, but that of portable meter as well. Its main function is to monitor the areas where dose rate would change without orderliness to prevent unplanned radiation exposure accidents from happening. The design way of the monitor, the main indicators description, the working principle and the comprising of software and hardware are briefly introduced. The monitor has the characteristics of simple installation, easy maintenance, little power consumption, wide range, notability of visual and audible alarm and so on. Its design and technique have novelty and advancement. (authors)

  9. External shading devices for energy efficient building

    Science.gov (United States)

    Shahdan, M. S.; Ahmad, S. S.; Hussin, M. A.

    2018-02-01

    External shading devices on a building façade is an important passive design strategy as they reduce solar radiation. Although studies have proven the benefits of external shading devices, many are designed solely for aesthetic purposes without fully considering its high potential to reduce solar radiation and glare. Furthermore, explorations into shading devices by the design team are mostly left too late in the design development phases. Hence, the paper looks into the effectiveness of external shading devices on a building towards more energy efficient building. The study aims to analyse the effects of various configurations of external shading devices towards the energy consumption of a case study building based on computer simulations. This study uses Building Information Modelling (BIM) through Autodesk Revit software as simulation tool. The constant variables for the simulation are the orientation of the building, types of glazing used by the building and the internal loads of the building. Whereas, the manipulated variable is the types of shading device used. The data were sorted according to the categories and translated into a chart. Analysis of the findings indicate that shading devices with different configurations show significant results in the energy consumption and the best configuration is the egg-crate shading devices. The study recommends that the consideration for shading device as a passive design strategy needs to be developed at the early stage of the building design.

  10. Adaptive heating, ventilation and solar shading for dwellings

    NARCIS (Netherlands)

    Alders, E.E.

    2017-01-01

    Calculation of various strategies for the heating of, and the prevention of overheating in, a Dutch standard dwelling that includes (automated) adaptive ventilation systems and solar shading to maintain indoor temperatures at acceptably comfortable temperatures informs this analysis of the costs,

  11. Evaluating Accuracy of the Sunnova Pro Platform Shade Measurement

    Energy Technology Data Exchange (ETDEWEB)

    2018-01-11

    Sunnova's new solar energy design platform, Sunnova Pro, automatically generates a 3D model of a building and surrounding shading objects. The product is designed to automate the process of engineering a system, sizing batteries and preparing sales proposals.

  12. Discrete Line Congruences for Shading and Lighting

    KAUST Repository

    Wang, Jun

    2013-07-01

    Two-parameter families of straight lines (line congruences) are implicitly present in graphics and geometry processing in several important ways including lighting and shape analysis. In this paper we make them accessible to optimization and geometric computing, by introducing a general discrete version of congruences based on piecewise-linear correspondences between triangle meshes. Our applications of congruences are based on the extraction of a so-called torsion-free support structure, which is a procedure analogous to remeshing a surface along its principal curvature lines. A particular application of such structures are freeform shading and lighting systems for architecture. We combine interactive design of such systems with global optimization in order to satisfy geometric constraints. In this way we explore a new area where architecture can greatly benefit from graphics.

  13. Growth characteristics and nutrient content of some herbaceous species under shade and fertilization

    Energy Technology Data Exchange (ETDEWEB)

    Koukoura, Z.; Kyriazopoulos, A. P.; Parissi, Z. M.

    2009-07-01

    Herbage production and nutrient content are affected by light interception and soil fertility. The objective of this study was to assess the effects of artificial shade and fertilization on herbage production, growth characteristics, and nutrient content of the grass species Dactylis glomerata and Festuca ovina, and the legume species Trifolium subterraneum and Medicago lupulina. Each plant species was placed under three shading treatments of 90% (heavy shade), 50% (moderate shade) and 0% (control). Fertilization (225 kg ha{sup -}1 N, 450 kg ha{sup -}1 P, and 225 kg ha{sup -}1 K) was applied to half of the pots of every species and shading treatment. Reduced light intensity (90% shading) significantly lowered herbage production from 18% for F. ovina to 48% for D. glomerata and decreased the root:shoot (R/S) ratio of all species but the moderate reduction of light intensity (50%) did not affect R/S ratio and herbage production of the grasses and M. lupulina, while it resulted in an increase of the production of T. subterraneum by 10.5%. Reduced light intensity increased by 25% on average, the crude protein concentration of the grass species while moderate shading did not affect the crude protein concentration of T. subterraneum. Fertilization increased herbage production from 16% for F. ovina to 59% for D. glomerata and ameliorated its nutrient content. Among the tested species, D. glomerata and T. subterraneum demonstrated the highest shade tolerance and could be incorporated into silvopastoral systems of the Mediterranean region. (Author)

  14. Characterization of cocoa production, income diversification and shade tree management along a climate gradient in Ghana

    Science.gov (United States)

    Jassogne, Laurence; Graefe, Sophie; Asare, Richard; Van Asten, Piet; Läderach, Peter; Vaast, Philippe

    2018-01-01

    Reduced climatic suitability due to climate change in cocoa growing regions of Ghana is expected in the coming decades. This threatens farmers’ livelihood and the cocoa sector. Climate change adaptation requires an improved understanding of existing cocoa production systems and farmers’ coping strategies. This study characterized current cocoa production, income diversification and shade tree management along a climate gradient within the cocoa belt of Ghana. The objectives were to 1) compare existing production and income diversification between dry, mid and wet climatic regions, and 2) identify shade trees in cocoa agroforestry systems and their distribution along the climatic gradient. Our results showed that current mean cocoa yield level of 288kg ha-1yr-1 in the dry region was significantly lower than in the mid and wet regions with mean yields of 712 and 849 kg ha-1 yr-1, respectively. In the dry region, farmers diversified their income sources with non-cocoa crops and off-farm activities while farmers at the mid and wet regions mainly depended on cocoa (over 80% of annual income). Two shade systems classified as medium and low shade cocoa agroforestry systems were identified across the studied regions. The medium shade system was more abundant in the dry region and associated to adaptation to marginal climatic conditions. The low shade system showed significantly higher yield in the wet region but no difference was observed between the mid and dry regions. This study highlights the need for optimum shade level recommendation to be climatic region specific. PMID:29659629

  15. Properties of bio-oil generated by a pyrolysis of forest cedar residuals with the movable Auger-type reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, Shun; Ebitani, Kohki, E-mail: ebitani@jaist.ac.jp [School of Materials Science, Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292 (Japan); Miyazato, Akio [Nanotechnology Center, Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292 (Japan)

    2016-02-01

    Our research project has developed the new movable reactor for bio-oil production in 2013 on the basis of Auger-type system. This package would be a great impact due to the concept of local production for local consumption in the hilly and mountainous area in not only Japan but also in the world. Herein, we would like to report the properties of the bio-oil generated by the developing Auger-type movable reactor. The synthesized bio-oil possessed C: 46.2 wt%, H: 6.5 wt%, N: wt%, S: <0.1 wt%, O: 46.8 wt% and H{sub 2}O: 18.4 wt%, and served a good calorific value of 18.1 MJ/kg. The spectroscopic and mass analyses such as FT-IR, GC-MS, {sup 13}C-NMR and FT-ICR MS supported that the bio-oil was composed by the fine mixtures of methoxy phenols and variety of alcohol or carboxylic acid functional groups. Thus, it is suggested that the bio-oil generated by the new movable Auger-type reactor has a significant potential as well as the existing bio-oil reported previously.

  16. Properties of bio-oil generated by a pyrolysis of forest cedar residuals with the movable Auger-type reactor

    International Nuclear Information System (INIS)

    Nishimura, Shun; Ebitani, Kohki; Miyazato, Akio

    2016-01-01

    Our research project has developed the new movable reactor for bio-oil production in 2013 on the basis of Auger-type system. This package would be a great impact due to the concept of local production for local consumption in the hilly and mountainous area in not only Japan but also in the world. Herein, we would like to report the properties of the bio-oil generated by the developing Auger-type movable reactor. The synthesized bio-oil possessed C: 46.2 wt%, H: 6.5 wt%, N: wt%, S: <0.1 wt%, O: 46.8 wt% and H 2 O: 18.4 wt%, and served a good calorific value of 18.1 MJ/kg. The spectroscopic and mass analyses such as FT-IR, GC-MS, 13 C-NMR and FT-ICR MS supported that the bio-oil was composed by the fine mixtures of methoxy phenols and variety of alcohol or carboxylic acid functional groups. Thus, it is suggested that the bio-oil generated by the new movable Auger-type reactor has a significant potential as well as the existing bio-oil reported previously

  17. Shading decreases the abundance of the herbivorous California horn snail, Cerithidea californica

    Science.gov (United States)

    Lorda, Julio; Lafferty, Kevin D.

    2012-01-01

    Most of the intertidal zone in estuaries of California, USA and Baja California, Mexico is covered with vascular vegetation. Shading by these vascular plants influences abiotic and biotic processes that shape benthic community assemblages. We present data on the effects of shading on the California horn snail, Cerithidea californica. This species is important because it is the most common benthic macrofaunal species in these systems and acts as an obligate intermediate host of several species of rematode parasites that infect several other species. Using observational and experimental studies, we found a negative effect of shade on the distribution and abundance of the California horn snail. We hypothesized that shading reduces the abundance of the epipelic diatoms that the snails feeds on, causing snails to leave haded areas. We observed a negative relationship between vascular plant cover, sub-canopy light levels, and snail density in Mugu Lagoon. Then we experimentally manipulated light regimes, by clipping vegetation and adding shade structures, and found higher snail densities at higher light levels. In Goleta Slough, we isolated the effect of shade from vegetation by documenting a negative relationship between the shade created by two bridges and diatom and snail densities. We also found that snails moved the greatest distances over shaded channel banks compared to unshaded channel banks. Further, we documented the effect of water depth and channel bank orientation on shading in this system. An additional effect of shading is the reduction of temperature, providing an alternative explanation for some of our results. These results broaden our knowledge of how variation in the light environment influences the ecology of estuarine ecosystems.

  18. Dynamic posturography using a new movable multidirectional platform driven by gravity.

    NARCIS (Netherlands)

    Commissaris, D.A.C.M.; Nieuwenhuijzen, P.H.J.A.; Overeem, S.; Vos, A. de; Duysens, J.E.J.; Bloem, B.R.

    2002-01-01

    Human upright balance control can be quantified using movable platforms driven by servo-controlled torque motors (dynamic posturography). We introduce a new movable platform driven by the force of gravity acting upon the platform and the subject standing on it. The platform consists of a 1 m2 metal

  19. Dynamic posturography using a new movable multidirectional platform driven by gravity

    NARCIS (Netherlands)

    Commissaris, D.A.C.M.; Nieuwenhuijzen, P.H.J.A.; Overeem, S.; Vos, A. de; Duysens, J.E.J.; Bloem, B.R.

    2002-01-01

    Human upright balance control can be quantified using movable platforms driven by servo-controlled torque motors (dynamic posturography). We introduce a new movable platform driven by the force of gravity acting upon the platform and the subject standing on it. The platform consists of a 1 m(2)

  20. The Power of Collateral : How Problems in Securing Transections Limit Private Credit from Movable Property

    OpenAIRE

    Fleisig, Heywood

    1995-01-01

    In many developing countries, faulty laws and regulations make it hard to use livestock, machines, equipment, standing crops, and other movable property as collateral. The resulting constraints on access to credit hurt economies. In Bolivia, for example, a faulty legal and regulatory framework for the use of movable property as collateral has led to a loss in GDP estimated at between 5 and...

  1. Effects of a shade-matching light and background color on reliability in tooth shade selection.

    Science.gov (United States)

    Najafi-Abrandabadi, Siamak; Vahidi, Farhad; Janal, Malvin N

    2018-01-01

    The purpose of this study was to evaluate the effects of a shade-matching light (Rite-Lite-2, AdDent) and different viewing backgrounds on reliability in a test of shade tab matching. Four members of the Prosthodontic faculty matched 10 shade tabs selected for a range of shades against the shade guide. All raters were tested for color blindness and were calibrated prior to the study. Matching took place under four combinations of conditions: with operatory light or the shade-matching light, and using either a pink or a blue background. Reliability was quantified with the kappa statistic, separately for agreement of value, hue, and chroma for each shade tab. In general, raters showed fair to moderate levels of agreement when judging the value of the shade tabs, but could not agree on the hue and chroma of the stimuli. The pink background led to higher levels of agreement than the blue background, and the shade-matching light improved agreement when used in conjunction with the pink but not the blue background. Moderate levels of agreement were found in matching shade tab value. Agreement was generally better when using the pink rather than the blue background, regardless of light source. The use of the shade-matching light tended to amplify the advantage of the pink background.

  2. Reliability and accuracy of four dental shade-matching devices.

    Science.gov (United States)

    Kim-Pusateri, Seungyee; Brewer, Jane D; Davis, Elaine L; Wee, Alvin G

    2009-03-01

    There are several electronic shade-matching instruments available for clinical use, but the reliability and accuracy of these instruments have not been thoroughly investigated. The purpose of this in vitro study was to evaluate the reliability and accuracy of 4 dental shade-matching instruments in a standardized environment. Four shade-matching devices were tested: SpectroShade, ShadeVision, VITA Easyshade, and ShadeScan. Color measurements were made of 3 commercial shade guides (Vitapan Classical, Vitapan 3D-Master, and Chromascop). Shade tabs were placed in the middle of a gingival matrix (Shofu GUMY) with shade tabs of the same nominal shade from additional shade guides placed on both sides. Measurements were made of the central region of the shade tab positioned inside a black box. For the reliability assessment, each shade tab from each of the 3 shade guide types was measured 10 times. For the accuracy assessment, each shade tab from 10 guides of each of the 3 types evaluated was measured once. Differences in reliability and accuracy were evaluated using the Standard Normal z test (2 sided) (alpha=.05) with Bonferroni correction. Reliability of devices was as follows: ShadeVision, 99.0%; SpectroShade, 96.9%; VITA Easyshade, 96.4%; and ShadeScan, 87.4%. A significant difference in reliability was found between ShadeVision and ShadeScan (P=.008). All other comparisons showed similar reliability. Accuracy of devices was as follows: VITA Easyshade, 92.6%; ShadeVision, 84.8%; SpectroShade, 80.2%; and ShadeScan, 66.8%. Significant differences in accuracy were found between all device pairs (Preliability (over 96%), indicating predictable shade values from repeated measurements. However, there was more variability in accuracy among devices (67-93%), and differences in accuracy were seen with most device comparisons.

  3. Safety Performance Evaluations for the Vehicle Based Movable Barriers Using Full Scale Crash Tests

    Directory of Open Access Journals (Sweden)

    Jin Minsoo

    2017-01-01

    Full Text Available The present study aims to develop a prototype of large-size movable barriers to protect roadside workers from incoming vehicles to the road work area with the following functions: maximization of work space in the right and left directions, convenient mobility, and minimization of impact without modification of the inside of movable barriers into traffic lanes and perform safety performance assessment on passengers through full scale crash tests. The large movable barrier was divided into folder type and telescope type and the development stage was now at the prototype phase. A full scale crash test was conducted prior to certification test at a level of 90%. The full scale crash test result showed that both types of folder type movable barrier and telescope type movable barrier satisfied the standard of the passenger safety performance evaluation at a level of 90%.

  4. Topological design of compliant smart structures with embedded movable actuators

    International Nuclear Information System (INIS)

    Wang, Yiqiang; Zhang, Xiaopeng; Kang, Zhan; Luo, Zhen

    2014-01-01

    In the optimal configuration design of piezoelectric smart structures, it is favorable to use actuation elements with certain predefined geometries from the viewpoint of manufacturability of fragile piezoelectric ceramics in practical applications. However, preserving the exact shape of these embedded actuators and tracking their dynamic motions presents a more challenging research task than merely allowing them to take arbitrary shapes. This paper proposes an integrated topology optimization method for the systematic design of compliant smart structures with embedded movable PZT (lead zirconate titanate) actuators. Compared with most existing studies, which either optimize positions/sizes of the actuators in a given host structure or design the host structure with pre-determined actuator locations, the proposed method simultaneously optimizes the positions of the movable PZT actuators and the topology of the host structure, typically a compliant mechanism for amplifying the small strain stroke. A combined topological description model is employed in the optimization, where the level set model is used to track the movements of the PZT actuators and the independent point-wise density interpolation (iPDI) approach is utilized to search for the optimal topology of the host structure. Furthermore, we define an integral-type constraint function to prevent overlaps between the PZT actuators and between the actuators and the external boundaries of the design domain. Such a constraint provides a unified and explicit mathematical statement of the non-overlap condition for any number of arbitrarily shaped embedded actuators. Several numerical examples are used to demonstrate the effectiveness of the proposed optimization method. (paper)

  5. Optimization of partially shaded PV array using a modified P&O MPPT algorithm

    Directory of Open Access Journals (Sweden)

    Abdelaziz YOUCEF

    2016-07-01

    Full Text Available A photovoltaic (PV array generated power is directly affected by temperature, solar irradiation, shading, and array configuration. In practice, PV arrays could be partially shaded by could, buildings, trees and other utilities. In this case, multiple maximums appear in the P-V curve, a global maximum and one or several local maximums. The “perturb and observe“ (P&O maximum power point tracking (MPPT algorithm cannot differentiate between a global and a local maximum and it is therefore ineffective when partial shading occurs. First, this paper presents an original mathematical model of the P-V curve of a partially shaded PV array, that was used to perform a simulation study in order to show the P&O algorithm inability to track the global MPP of a PV array solar system under partial shading for low shading irradiation levels, then an adaptation sub algorithm is proposed to be added to the P&O algorithm in order to give it the ability to track the global MPP. This sub algorithm moves the operating point imposed by the partial shading configuration to a point in the vicinity of the global MPP in order to be easily tracked by the P&O algorithm. In the simulation, a PV array with a hundred modules has been considered by using a light, a medium then a severe shading configuration. The results obtained indicate that the proposed modified P&O algorithm is able to track the global MPP for the considered shading configurations and for any shading irradiation level.

  6. Assessment of color parameters of composite resin shade guides using digital imaging versus colorimeter.

    Science.gov (United States)

    Yamanel, Kivanc; Caglar, Alper; Özcan, Mutlu; Gulsah, Kamran; Bagis, Bora

    2010-12-01

    This study evaluated the color parameters of resin composite shade guides determined using a colorimeter and digital imaging method. Four composite shade guides, namely: two nanohybrid (Grandio [Voco GmbH, Cuxhaven, Germany]; Premise [KerrHawe SA, Bioggio, Switzerland]) and two hybrid (Charisma [Heraeus Kulzer, GmbH & Co. KG, Hanau, Germany]; Filtek Z250 [3M ESPE, Seefeld, Germany]) were evaluated. Ten shade tabs were selected (A1, A2, A3, A3,5, A4, B1, B2, B3, C2, C3) from each shade guide. CIE Lab values were obtained using digital imaging and a colorimeter (ShadeEye NCC Dental Chroma Meter, Shofu Inc., Kyoto, Japan). The data were analyzed using two-way analysis of variance and Bonferroni post hoc test. Overall, the mean ΔE values from different composite pairs demonstrated statistically significant differences when evaluated with the colorimeter (p 6.8). For all shade pairs evaluated, the most significant shade mismatches were obtained between Grandio-Filtek Z250 (p = 0.021) and Filtek Z250-Premise (p = 0.01) regarding ΔE mean values, whereas the best shade match was between Grandio-Charisma (p = 0.255) regardless of the measurement method. The best color match (mean ΔE values) was recorded for A1, A2, and A3 shade pairs in both methods. When proper object-camera distance, digital camera settings, and suitable illumination conditions are provided, digital imaging method could be used in the assessment of color parameters. Interchanging use of shade guides from different composite systems should be avoided during color selection. © 2010, COPYRIGHT THE AUTHORS. JOURNAL COMPILATION © 2010, WILEY PERIODICALS, INC.

  7. Bird communities in sun and shade coffee farms in Kenya

    Directory of Open Access Journals (Sweden)

    C. Smith

    2015-07-01

    Full Text Available Agricultural expansion to meet rising crop demand is one of the greatest threats to terrestrial biodiversity. Coffee, one of the most valuable trade items in tropical countries, can provide both economic livelihood and wildlife habitat. Previous work, conducted primarily on Neotropical coffee farms, indicates that birds are generally more abundant and diverse in farms with a canopy of shade trees, though regional variation exists. To date, few studies have examined birds on coffee farms in Africa, which contains 20% of the world’s coffee acreage. We studied differences in the bird communities between sun and shade monoculture coffee in central Kenya, and we examined effects of vegetation on bird abundance and diversity. Sun coffee had higher species richness and abundances of all major guilds (omnivores, insectivores, and granivores, and showed low community similarity to shade. Unlike findings from the Neotropics, canopy cover appeared to have a negative influence on all guilds, while understory volume of weeds increased bird abundance and species richness with a similar magnitude as canopy cover. These differences highlight the need for further studies in the general East Africa region with a wider variety of shade coffee systems.

  8. Delay time in a single barrier for a movable quantum shutter

    International Nuclear Information System (INIS)

    Hernandez, Alberto

    2010-01-01

    The transient solution and delay time for a δ potential scatterer with a movable quantum shutter is calculated by solving analytically the time-dependent Schroedinger equation. The delay time is analyzed as a function of the distance between the shutter and the potential barrier and also as a function of the distance between the potential barrier and the detector. In both cases, it is found that the delay time exhibits a dynamical behavior and that it tends to a saturation value Δt sat in the limit of very short distances, which represents the maximum delay produced by the potential barrier near the interaction region. The phase time τ θ , on the other hand, is not an appropriate time scale for measuring the time delay near the interaction region, except if the shutter is moved far away from the potential. The role played by the antibound state of the system on the behavior of the delay time is also discussed.

  9. Olduvai Gorge, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    Three striking and important areas of Tanzania in eastern Africa are shown in this color-coded shaded relief image from the Shuttle Radar Topography Mission. The largest circular feature in the center right is the caldera, or central crater, of the extinct volcano Ngorongoro. It is surrounded by a number of smaller volcanoes, all associated with the Great Rift Valley, a geologic fault system that extends for about 4,830 kilometers (2,995 miles) from Syria to central Mozambique. Ngorongoro's caldera is 22.5 kilometers (14 miles) across at its widest point and is 610 meters (2,000 feet) deep. Its floor is very level, holding a lake fed by streams running down the caldera wall. It is part of the Ngorongoro Conservation Area and is home to over 75,000 animals. The lakes south of the crater are Lake Eyasi and Lake Manyara, also part of the conservation area. The relatively smooth region in the upper left of the image is the Serengeti National Park, the largest in Tanzania. The park encompasses the main part of the Serengeti ecosystem, supporting the greatest remaining concentration of plains game in Africa including more than 3,000,000 large mammals. The animals roam the park freely and in the spectacular migrations, huge herds of wild animals move to other areas of the park in search of greener grazing grounds (requiring over 4,000 tons of grass each day) and water. The faint, nearly horizontal line near the center of the image is Olduvai Gorge, made famous by the discovery of remains of the earliest humans to exist. Between 1.9 and 1.2 million years ago a salt lake occupied this area, followed by the appearance of fresh water streams and small ponds. Exposed deposits show rich fossil fauna, many hominid remains and items belonging to one of the oldest stone tool technologies, called Olduwan. The time span of the objects recovered dates from 2,100,000 to 15,000 years ago. Two visualization methods were combined to produce the image: shading and color coding of

  10. Assessment of microclimate conditions under artificial shades in a ginseng field

    Directory of Open Access Journals (Sweden)

    Kyu Jong Lee

    2016-01-01

    Conclusion: Weather measurements outside the shade and LWD estimates derived from these measurements would be useful as inputs for decision support systems to predict ginseng growth and disease development.

  11. Multiple Solutions for Reconfiguration to Address Partial Shading Losses in Solar Photovoltaic Arrays

    Science.gov (United States)

    Sharma, Nikesh; Pareek, Smita; Chaturvedi, Nitin; Dahiya, Ratna

    2018-03-01

    Solar photovoltaic (SPV) systems are steadily rising and considered as the best alternatives to meet the rising demand of energy. In developing countries like India, SPV’s contribution being a clean energy is the most favourable. However, experiences have shown that produced power of these systems is usually affected due to day, night, seasonal variations, insolation, partial shading conditions etc. Among these parameters, partial shading causes a huge reduction in output power of PV systems. This results in lack of confidence for this technology among users. Thus, it is important and a major challenge in PV systems to minimize the effect of partial shading on their energy production. The work in this paper aims to propose solutions for reconfiguration of solar photovoltaic arrays in order to reduce partial shading losses and thus to enhance power generation.

  12. Occupants’ satisfaction with the visual environment in a single office with individual lighting and solar shading control

    DEFF Research Database (Denmark)

    Iversen, Anne; Nielsen, Toke Rammer; Svendsen, Svend

    2008-01-01

    A study was conducted in a test room equipped with an external reflecting solar shading system, energy efficient luminaires and a work station. The shading system reduces the illuminance level in the front of the room on days with clear sky and increases the illuminance in the back of the room...

  13. Modeling shade tree use by beef cattle as a function of black globe temperature and time of day

    Science.gov (United States)

    Foust, Amanda M.; Headlee, William L.

    2017-12-01

    Increasing temperatures associated with global climate change threaten to disrupt agricultural systems such as beef production, yet relatively little is known about the use of natural tree shade to mitigate the negative effects of heat stress on beef cattle. In this study, we evaluated how temperature and time of day influenced the utilization of tree shade in relation to coloration, orientation, and behavior of beef cattle in a pasture system. Temperatures in shade and direct sunlight were measured using black globe temperature (BGT) data loggers. Time-lapse images from game cameras were used to obtain counts of shade usage, coloration, orientation, and behavior of cattle throughout the daytime hours. In general, we found that shade utilization and most of the predominating orientations and behaviors differed significantly ( P effects (Hour × BGTsun) were often nonsignificant. The mean percentage of the herd using shade was highest in mid-morning (87-96%) and early afternoon (97%), but also increased with BGTsun regardless of the time of day; these trends were similar for both dark- and light-colored cattle. Lying down was the dominant behavior exhibited in the shade, while foraging was the most prevalent behavior in the sun. When herd shade usage was lowest in mid- to late-afternoon (<1%) we also observed an increase in the use of heat-mitigating orientations in the sun (37-47%). We discuss some practical implications of these results, including the potential use of temperature thresholds to interpret cattle behaviors and shade usage.

  14. Color stability of shade guides after autoclave sterilization.

    Science.gov (United States)

    Schmeling, Max; Sartori, Neimar; Monteiro, Sylvio; Baratieri, Luiz

    2014-01-01

    This study evaluated the influence of 120 autoclave sterilization cycles on the color stability of two commercial shade guides (Vita Classical and Vita System 3D-Master). The specimens were evaluated by spectrophotometer before and after the sterilization cycles. The color was described using the three-dimensional CIELab system. The statistical analysis was performed in three chromaticity coordinates, before and after sterilization cycles, using the paired samples t test. All specimens became darker after autoclave sterilization cycles. However, specimens of Vita Classical became redder, while those of the Vita System 3D-Master became more yellow. Repeated cycles of autoclave sterilization caused statistically significant changes in the color coordinates of the two shade guides. However, these differences are considered clinically acceptable.

  15. Net herbage accumulation rate and crude protein content of Urochloa brizantha cultivars under shade intensities

    OpenAIRE

    Paulo Roberto de Lima Meirelles; Erikelly Aline Ribeiro de Santana; Guilherme Mendes Machado Franco de Arruda; Ciniro Costa; Marina Gabriela Berchiol da Silva

    2013-01-01

    The use of silvopastoral systems is a sustainable alternative for animal production in various regions of the Brazil. However to obtain satisfactory results in these systems, the selection of forage species that grows well in the shade should be done. The tolerance of plants to light restriction and the correctly choice of species, considering good nutritional values for these conditions has great importance. The study of artificial shading for forage production helps the clarification of iss...

  16. Interior shadings for office indoor visual comfort in humid climate region

    Science.gov (United States)

    Dinapradipta, Asri; Sudarma, Erwin; Defiana, Ima; Erwindi, Collinthia

    2018-03-01

    As part of the fenestration system, the interior shadings have also a role to control the indoor environment to maintain indoor visual comfort. As the occupants have personal access to control these, their control behavior then, might enhance or even worsen indoor comfort performance. The controlling behavior might not only influence indoor comfort performance but can also indicate the success or failure of interior shading as a control device element. This paper is intended to report control behavior patterns, as represented by the variety of the slats’ openings of two types of interior shading i.e. Venetian and Vertical blinds and to analyze these on the concurrent impacts to indoor office building’s indoor illuminance and luminance distribution. The purpose of this research is to figure out the shading control patterns as well as to examine the effectiveness of these two types of interior shadings to control indoor visual environment. This study is a quantitative research using experimentation on the slats’ opening of two types of shadings at two identical office rooms. The research results suggested that both types of blinds seem unsuitable for gaining proper illumination values at work planes in humid tropics area. However, these shadings demonstrate good performance for luminance distribution except for that of the closed Venetian blinds.

  17. Effects of shading and covering material application for delaying ...

    African Journals Online (AJOL)

    To delay the harvest of Sultani Cekirdeksiz grape variety and to reduce pre and post-harvest botrytis bunch rot severity, shading and covering material application were tested in 2009 to 2010 growing periods. In this study, grape vines were shaded with shading materials which had three different shading densities (35, 55, ...

  18. Shaded Relief of Minnesota Elevation - Color

    Data.gov (United States)

    Minnesota Department of Natural Resources — This file is a product of a shaded relief process on the 30 meter resolution Digital Elevation Model data (dem30im3). This image was created using a custom AML...

  19. Shaded Relief of Minnesota Elevation - Black & White

    Data.gov (United States)

    Minnesota Department of Natural Resources — This file is a product of a shaded relief process on the 30 meter resolution Digital Elevation Model data (dem30im3). This image was created using a custom AML...

  20. Lake Bathymetric DEM Shaded Relief Image

    Data.gov (United States)

    Minnesota Department of Natural Resources — Geo-referenced, shaded relief image of lake bathymetry classified at 5-foot depth intervals. This dataset has a cell resolution of 5 meters (occasionally 10m) as...

  1. Influence of resin cement shade on the color and translucency of ceramic veneers

    Science.gov (United States)

    HERNANDES, Daiana Kelly Lopes; ARRAIS, Cesar Augusto Galvão; de LIMA, Erick; CESAR, Paulo Francisco; RODRIGUES, José Augusto

    2016-01-01

    ABSTRACT Objective This in vitro study evaluated the effect of two different shades of resin cement (RC- A1 and A3) layer on color change, translucency parameter (TP), and chroma of low (LT) and high (HT) translucent reinforced lithium disilicate ceramic laminates. Material and Methods One dual-cured RC (Variolink II, A1- and A3-shade, Ivoclar Vivadent) was applied to 1-mm thick ceramic discs to create thin RC films (100 µm thick) under the ceramics. The RC was exposed to light from a LED curing unit. Color change (ΔE) of ceramic discs was measured according to CIEL*a*b* system with a standard illuminant D65 in reflectance mode in a spectrophotometer, operating in the light range of 360-740 nm, equipped with an integrating sphere. The color difference between black (B) and white (W) background readings was used for TP analysis, while chroma was calculated by the formula C* ab=(a*2+b*2)½. ΔE of 3.3 was set as the threshold of clinically unacceptable. The results were evaluated by two-way ANOVA followed by Tukey's post hoc test. Results HT ceramics showed higher ΔE and higher TP than LT ceramics. A3-shade RC promoted higher ΔE than A1-shade cement, regardless of the ceramic translucency. No significant difference in TP was noted between ceramic discs with A1- and those with A3-shade cement. Ceramic with underlying RC showed lower TP than discs without RC. HT ceramics showed lower chroma than LT ceramics, regardless of the resin cement shade. The presence of A3-shade RC resulted in higher chroma than the presence of A1-shade RC. Conclusions Darker underlying RC layer promoted more pronounced changes in ceramic translucency, chroma, and shade of high translucent ceramic veneers. These differences may not be clinically differentiable. PMID:27556211

  2. Influence of resin cement shade on the color and translucency of ceramic veneers

    Directory of Open Access Journals (Sweden)

    Daiana Kelly Lopes HERNANDES

    Full Text Available ABSTRACT Objective This in vitro study evaluated the effect of two different shades of resin cement (RC- A1 and A3 layer on color change, translucency parameter (TP, and chroma of low (LT and high (HT translucent reinforced lithium disilicate ceramic laminates. Material and Methods One dual-cured RC (Variolink II, A1- and A3-shade, Ivoclar Vivadent was applied to 1-mm thick ceramic discs to create thin RC films (100 µm thick under the ceramics. The RC was exposed to light from a LED curing unit. Color change (ΔE of ceramic discs was measured according to CIEL*a*b* system with a standard illuminant D65 in reflectance mode in a spectrophotometer, operating in the light range of 360-740 nm, equipped with an integrating sphere. The color difference between black (B and white (W background readings was used for TP analysis, while chroma was calculated by the formula C*ab=(a*2+b*2½. ΔE of 3.3 was set as the threshold of clinically unacceptable. The results were evaluated by two-way ANOVA followed by Tukey's post hoc test. Results HT ceramics showed higher ΔE and higher TP than LT ceramics. A3-shade RC promoted higher ΔE than A1-shade cement, regardless of the ceramic translucency. No significant difference in TP was noted between ceramic discs with A1- and those with A3-shade cement. Ceramic with underlying RC showed lower TP than discs without RC. HT ceramics showed lower chroma than LT ceramics, regardless of the resin cement shade. The presence of A3-shade RC resulted in higher chroma than the presence of A1-shade RC. Conclusions Darker underlying RC layer promoted more pronounced changes in ceramic translucency, chroma, and shade of high translucent ceramic veneers. These differences may not be clinically differentiable.

  3. Influence of resin cement shade on the color and translucency of ceramic veneers.

    Science.gov (United States)

    Hernandes, Daiana Kelly Lopes; Arrais, Cesar Augusto Galvão; Lima, Erick de; Cesar, Paulo Francisco; Rodrigues, José Augusto

    2016-01-01

    This in vitro study evaluated the effect of two different shades of resin cement (RC- A1 and A3) layer on color change, translucency parameter (TP), and chroma of low (LT) and high (HT) translucent reinforced lithium disilicate ceramic laminates. One dual-cured RC (Variolink II, A1- and A3-shade, Ivoclar Vivadent) was applied to 1-mm thick ceramic discs to create thin RC films (100 µm thick) under the ceramics. The RC was exposed to light from a LED curing unit. Color change (ΔE) of ceramic discs was measured according to CIEL*a*b* system with a standard illuminant D65 in reflectance mode in a spectrophotometer, operating in the light range of 360-740 nm, equipped with an integrating sphere. The color difference between black (B) and white (W) background readings was used for TP analysis, while chroma was calculated by the formula C*ab=(a*2+b*2)½. ΔE of 3.3 was set as the threshold of clinically unacceptable. The results were evaluated by two-way ANOVA followed by Tukey's post hoc test. HT ceramics showed higher ΔE and higher TP than LT ceramics. A3-shade RC promoted higher ΔE than A1-shade cement, regardless of the ceramic translucency. No significant difference in TP was noted between ceramic discs with A1- and those with A3-shade cement. Ceramic with underlying RC showed lower TP than discs without RC. HT ceramics showed lower chroma than LT ceramics, regardless of the resin cement shade. The presence of A3-shade RC resulted in higher chroma than the presence of A1-shade RC. Darker underlying RC layer promoted more pronounced changes in ceramic translucency, chroma, and shade of high translucent ceramic veneers. These differences may not be clinically differentiable.

  4. Ethnicity and perception of dental shade esthetics.

    Science.gov (United States)

    Niaz, Muhammad Omar; Naseem, Mustafa; Elcock, Claire

    2015-01-01

    To determine whether or not people from different ethnic backgrounds have different attitudes towards dental esthetics and chose different dental appearances in terms of tooth shade, and to determine whether the dental professional's choice and the individual's own choice have any relationship with what the individual ideally perceives as esthetically pleasing. For this cross-sectional analytical study, 120 volunteer students from the University of Sheffield (excepting dental students) from various ethnic backgrounds, of different ages, of both genders, and with varying degree/educational levels were recruited from the campus. The volunteers were asked to complete a questionnaire containing 9 adapted attitudinal statements regarding positive or negative dental esthetic perceptions in terms of tooth shade, with responses on a 5-point Likert scale from "Entirely agree" to "Entirely disagree". Scores for all attitudinal statements were summed up to give an attitudinal score. The participants' ideal, perceived, and actual (self-assessed and investigatorassessed) tooth shade was also determined using a shade guide and a facial mirror. No association between ethnicity and attitudinal score was found. However, statistically significant associations were found between the participants' degree/educational level (P=0.004, 95% Confidence Interval (CI)=-4.18 to -0.82) and their ideal tooth shade value (P=0.038, 95% CI=-3.53 to -0.11). There were strong correlations between self-assessed and professionally assessed tooth shade value in all ethnic groups, with Spearman's rank correlation coefficient (rho) being ρ>0.6. Regarding ideally desired and perceived tooth shade value, weak correlations were found in all ethnic groups (Spearman's rho being ρethnicity and attitude towards dental esthetics with regard to tooth shade, both ethnicity and dental esthetics are very diverse terms with multiple dimensions, each of which needs further investigation with regard to their mutual

  5. 3D Traffic Scene Understanding From Movable Platforms.

    Science.gov (United States)

    Geiger, Andreas; Lauer, Martin; Wojek, Christian; Stiller, Christoph; Urtasun, Raquel

    2014-05-01

    In this paper, we present a novel probabilistic generative model for multi-object traffic scene understanding from movable platforms which reasons jointly about the 3D scene layout as well as the location and orientation of objects in the scene. In particular, the scene topology, geometry, and traffic activities are inferred from short video sequences. Inspired by the impressive driving capabilities of humans, our model does not rely on GPS, lidar, or map knowledge. Instead, it takes advantage of a diverse set of visual cues in the form of vehicle tracklets, vanishing points, semantic scene labels, scene flow, and occupancy grids. For each of these cues, we propose likelihood functions that are integrated into a probabilistic generative model. We learn all model parameters from training data using contrastive divergence. Experiments conducted on videos of 113 representative intersections show that our approach successfully infers the correct layout in a variety of very challenging scenarios. To evaluate the importance of each feature cue, experiments using different feature combinations are conducted. Furthermore, we show how by employing context derived from the proposed method we are able to improve over the state-of-the-art in terms of object detection and object orientation estimation in challenging and cluttered urban environments.

  6. Multiscale modeling of porous ceramics using movable cellular automaton method

    Science.gov (United States)

    Smolin, Alexey Yu.; Smolin, Igor Yu.; Smolina, Irina Yu.

    2017-10-01

    The paper presents a multiscale model for porous ceramics based on movable cellular automaton method, which is a particle method in novel computational mechanics of solid. The initial scale of the proposed approach corresponds to the characteristic size of the smallest pores in the ceramics. At this scale, we model uniaxial compression of several representative samples with an explicit account of pores of the same size but with the unique position in space. As a result, we get the average values of Young's modulus and strength, as well as the parameters of the Weibull distribution of these properties at the current scale level. These data allow us to describe the material behavior at the next scale level were only the larger pores are considered explicitly, while the influence of small pores is included via effective properties determined earliar. If the pore size distribution function of the material has N maxima we need to perform computations for N-1 levels in order to get the properties step by step from the lowest scale up to the macroscale. The proposed approach was applied to modeling zirconia ceramics with bimodal pore size distribution. The obtained results show correct behavior of the model sample at the macroscale.

  7. Superconducting polarizing magnet for a movable polarized target

    International Nuclear Information System (INIS)

    Anishchenko, N.G.; Bartenev, V.D.; Blinov, N.A.

    1998-01-01

    The superconducting polarizing magnet was constructed for the JINR (Dubna) movable polarized target (MPT) with working volume 200 mm long and 30 mm in diameter. The magnet provides a polarizing magnetic field up to 6 T in the centre with the uniformity of 4.5 x 10 -4 in the working volume of the target. The magnet contains a main solenoidal winding 558 mm long and 206/144 mm in diameters, and compensating and correcting winding placed at its ends. The windings are made of a NbTi wire, impregnated with the epoxy resin and placed in the horizontal cryostat. The diameter of the 'warm' aperture of the magnet cryostat is 96 mm. The design and technology of the magnet winding are described. Results of the magnetic field map measurements, using a NMR-magnetometer are given. A similar magnet constructed at DAPNIA, CEA/Saclay (France), represented a model for the present development. The MPT array is installed in the beam line of polarized neutrons produced by break-up of polarized deuterons extracted from the synchrophasotron of the Laboratory of High Energies (LHE), JINR (Dubna)

  8. Coronary angioscopy: a monorail angioscope with movable guide wire.

    Science.gov (United States)

    Nanto, S; Ohara, T; Mishima, M; Hirayama, A; Komamura, K; Matsumura, Y; Kodama, K

    1991-03-01

    A new angioscope was devised for easier visualization of the coronary artery. In its tip, the angioscope (Olympus) with an outer diameter of 0.8 mm had a metal lumen, through which a 0.014-in steerable guide wire passed. Using a 8F guiding catheter and a guide wire, it was introduced into the distal coronary artery. With injection of warmed saline through the guiding catheter, the coronary segments were visualized. In the attempted 70 vessels (32 left anterior descending [LAD], 10 right coronary [RCA], 28 left circumflex [LCX]) from 48 patients, 60 vessels (86%) were successfully examined. Twenty-two patients who underwent attempted examination of both LAD and LCX; both coronary arteries were visualized in 19 patients (86%). In the proximal site of the lesion, 40 patients have the diagonal branch or the obtuse marginal branch. In 34 patients (85%) the angioscope was inserted beyond these branches. In 12 very tortuous vessels, eight vessels (67%) were examined. In conclusion, the new monorail coronary angioscope with movable guide wire is useful to examine the stenotic lesions of the coronary artery.

  9. Pasture shade and farm management effects on cow productivity in the tropics

    OpenAIRE

    Ainsworth, Justin A.W.; Moe, Stein R.; Skarpe, Christina

    2012-01-01

    This is the postprint version of the article. The published article can be located at the publisher's webpage Shade, provided by trees within pastures, can affect cattle productivity through mitigating heat stress and by altering understorey pasture growth and cattle behaviour. Models for daily milk yield and body condition were used to evaluate the effect of pasture shade on dual purpose cow productivity within a silvopastoral system in a dry tropical province of Nicaragua. Daily milk yie...

  10. Movable limiter experiment on TPE-1RM15 reversed field pinch machine

    International Nuclear Information System (INIS)

    Yagi, Yasuyuki; Shimada, Toshio; Hirota, Isao; Maejima, Yoshiki; Hirano, Yoichi; Ogawa, Kiyoshi

    1989-01-01

    Two movable limiters with a graphite head (35 mm Φ x 40 mm high) were installed in TPE-1RM15 reversed field pinch (RFP) machine. Measurement of the heat flux input to the movable limiters and the effect of the insertion of the limiter on plasma properties, as well as surface analyses of the graphite head after the exposure, were conducted. The heat flux input into the electron drift side of the limiter exceeded that from the ion drift side by factor of 4-6 at the maximum insertion of the limiters (10 mm inward from the shadow of the fixed limiters). This factor increased as the movable limiter protruded into the plasma, and this profile is attributed to the change of the pitch profile of the magnetic field line at the plasma periphery. At the maximum insertion of the two movable limiters, the energy input into a graphite head was about 10% of the joule input energy during the current sustainment phase. The one turn loop voltage and plasma resistance increased when the movable limiters were inserted beyond the shadow of the fixed limiters, and the increment of the joule input power roughly correlates with the increment of the loss power into the protruded movable limiters. Unbalanced position scanning showed that the relative distance of a movable limiter from the plasma column was not affected by another movable limiter installed 180 0 toroidally away from the former limiter. Fundamental surface analyses of the graphite head showed that deposition of metal impurities (Fe and Cr) was higher at the corner of the ion drift side than that of the electron shift side, and that the corner of the electron drift side was more roughened than the ion drift side. (orig.)

  11. Australia, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    Australia is the world's smallest, flattest, and (after Antarctica) driest continent, but at 7.7 million square kilometers (3.0 million square miles) it is also the sixth largest country. Its low average elevation (300 meters, or less than 1000 feet) is caused by its position near the center of a tectonic plate, where there are no volcanic or other geologic forces of the type that raise the topography of other continents. In fact Australia is the only continent without any current volcanic activity at all - the last eruption took place 1400 years ago at Mt. Gambier. The Australian continent is also one of the oldest land masses, with some of its erosion-exposed bedrock age dated at more than 3 billion years. More than one-fifth of the land area is desert, with more than two-thirds being classified as arid or semi-arid and unsuitable for settlement. The coldest regions are in the highlands and tablelands of Tasmania and the Australian Alps at the southeastern corner of the continent, location of Australia's highest point, Mt. Kosciusko (2228 meters, or 7310 feet.) Prominent features of Australia include the Lake Eyre basin, the darker green region visible in the center-right. At 16 meters (52 feet) below sea level this depression is one of the largest inland drainage systems in the world, covering more than 1.3 million square kilometers (500,000 square miles). The mountain range near the east coast is called the Great Dividing Range, forming a watershed between east and west flowing rivers. Erosion has created deep valleys, gorges and waterfalls in this range where rivers tumble over escarpments on their way to the sea. The crescent shaped uniform green region in the south, just left of center, is the Nullarbor Plain, a low-lying limestone plateau which is so flat that the Trans-Australian Railway runs through it in a straight line for more than 483 kilometers (300 miles). Two visualization methods were combined to produce this image: shading and color coding of

  12. Shade Trees Spatial Distribution and Its Effect on Grains and Beverage Quality of Shaded Coffee Trees

    Directory of Open Access Journals (Sweden)

    Francisco José da Silva Neto

    2018-01-01

    Full Text Available Shading coffee trees has gained importance, especially among smallholders, as an option to improve the products’ quality, therefore acquiring place at the specialty coffee market, where consumers are willing to give bonus for quality. This work aims to evaluate the influence of shade trees’ spatial distribution among coffee trees’ agronomic characteristics, yield, and beans and cup quality of shaded coffee trees. The experimental design consisted of completely randomized blocks with six repetitions and four treatments: coffee trees on shade trees planting rows, distant one meter from the trunk; coffee trees on shade trees planting row, distant six meters from the trunk; and coffee plants between the rows of shade trees, parallel to the previous treatments. The parameters analyzed were plant height, canopy diameter, plagiotropic branches’ length, yield, coffee fruits’ phenological stage, ripe cherries’ Brix degree, percentage of black, unripe, and insect damaged beans, bean size, and beverage quality. Shade trees quickened coffee fruits’ phenological stage of coffee trees nearest to them. This point also showed the best beverage quality, except for overripe fruits. The remaining parameters evaluated were not affected by shade trees’ spatial distribution.

  13. Analisi sperimentale dell’efficacia di sistemi frangisole per ridurre la pressione sonora in facciata - Experimental analysis on the sound protection given by the external shading systems attached to the building façade

    Directory of Open Access Journals (Sweden)

    Nicolò Zuccherini Martello

    2016-10-01

    Full Text Available L’utilizzo di sistemi frangisole è largamente diffuso nei nuovi edifici, ma le verifiche sul loro effetto sul campo sonoro in facciata sono ancora piuttosto limitate. Questo lavoro illustra i risultati di uno studio condotto in una camera semi-anecoica su un modello in scala reale di una porzione di facciata dotata di sistemi frangisole. Lo scopo era quello di verificare l’influenza sul livello sonoro in facciata di sistemi frangisole in differenti configurazioni (lamelle diversamente inclinate, con o senza rivestimento fonoassorbente. Le misure evidenziano che i frangisole con lamelle fonoassorbenti possono ridurre significativamente il livello sonoro sul piano della facciata. ------ The use of shading systems is quite widespread in new buildings, but their acoustic effect on the sound pressure level on building façades has generally not been considered. This work presents the results of an investigation on a 1:1 scale model of a louvers system, carried out in a semi-anechoic chamber. The aim was to analyze the changes in SPL on the façade given by the presence of the louvers in different configurations (three tilt angles of the louvers, with or without sound absorptive material. The measurements highlighted a slight increase in SPL on the façade when the standard louvers were installed, while the sound absorptive material gave an evident SPL reduction on the façade.

  14. Photovoltaic Shading Testbed for Module-Level Power Electronics: 2016 Performance Data Update

    Energy Technology Data Exchange (ETDEWEB)

    Deline, Chris [National Renewable Energy Lab. (NREL), Golden, CO (United States); Meydbray, Jenya [PV Evolution Labs (PVEL), Davis, CA (United States); Donovan, Matt [PV Evolution Labs (PVEL), Davis, CA (United States)

    2016-09-01

    The 2012 NREL report 'Photovoltaic Shading Testbed for Module-Level Power Electronics' provides a standard methodology for estimating the performance benefit of distributed power electronics under partial shading conditions. Since the release of the report, experiments have been conducted for a number of products and for different system configurations. Drawing from these experiences, updates to the test and analysis methods are recommended. Proposed changes in data processing have the benefit of reducing the sensitivity to measurement errors and weather variability, as well as bringing the updated performance score in line with measured and simulated values of the shade recovery benefit of distributed PV power electronics. Also, due to the emergence of new technologies including sub-module embedded power electronics, the shading method has been extended to include power electronics that operate at a finer granularity than the module level. An update to the method is proposed to account for these emerging technologies that respond to shading differently than module-level devices. The partial shading test remains a repeatable test procedure that attempts to simulate shading situations as would be experienced by typical residential or commercial rooftop photovoltaic (PV) systems. Performance data for multiple products tested using this method are discussed, based on equipment from Enphase, Solar Edge, Maxim Integrated and SMA. In general, the annual recovery of shading losses from the module-level electronics evaluated is 25-35%, with the major difference between different trials being related to the number of parallel strings in the test installation rather than differences between the equipment tested. Appendix D data has been added in this update.

  15. Effect of late planting and shading on cellulose synthesis during cotton fiber secondary wall development.

    Directory of Open Access Journals (Sweden)

    Ji Chen

    Full Text Available Cotton-rapeseed or cotton-wheat double cropping systems are popular in the Yangtze River Valley and Yellow River Valley of China. Due to the competition of temperature and light resources during the growing season of double cropping system, cotton is generally late-germinating and late-maturing and has to suffer from the coupling of declining temperature and low light especially in the late growth stage. In this study, late planting (LP and shading were used to fit the coupling stress, and the coupling effect on fiber cellulose synthesis was investigated. Two cotton (Gossypium hirsutum L. cultivars were grown in the field in 2010 and 2011 at three planting dates (25 April, 25 May and 10 June each with three shading levels (normal light, declined 20% and 40% PAR. Mean daily minimum temperature was the primary environmental factor affected by LP. The coupling of LP and shading (decreased cellulose content by 7.8%-25.5% produced more severe impacts on cellulose synthesis than either stress alone, and the effect of LP (decreased cellulose content by 6.7%-20.9% was greater than shading (decreased cellulose content by 0.7%-5.6%. The coupling of LP and shading hindered the flux from sucrose to cellulose by affecting the activities of related cellulose synthesis enzymes. Fiber cellulose synthase genes expression were delayed under not only LP but shading, and the coupling of LP and shading markedly postponed and even restrained its expression. The decline of sucrose-phosphate synthase activity and its peak delay may cause cellulose synthesis being more sensitive to the coupling stress during the later stage of fiber secondary wall development (38-45 days post-anthesis. The sensitive difference of cellulose synthesis between two cultivars in response to the coupling of LP and shading may be mainly determined by the sensitiveness of invertase, sucrose-phosphate synthase and cellulose synthase.

  16. Seasonal contrasts in the response of coffee ants to agroforestry shade-tree management.

    Science.gov (United States)

    Teodoro, A V; Sousa-Souto, L; Klein, A-M; Tscharntke, T

    2010-12-01

    In many tropical landscapes, agroforestry systems are the last forested ecosystems, providing shade, having higher humidity, mitigating potential droughts, and possessing more species than any other crop system. Here, we tested the hypothesis that higher levels of shade and associated humidity in agroforestry enhance coffee ant richness more during the dry than rainy season, comparing ant richness in 22 plots of three coffee agroforestry types in coastal Ecuador: simple-shade agroforests (intensively managed with low tree species diversity), complex-shade agroforests (extensively managed with intermediate tree species diversity) and abandoned coffee agroforests (abandoned for 10-15 yr and resembling secondary forests). Seasonality affected responses of ant richness but not composition to agroforestry management, in that most species were observed in abandoned coffee agroforests in the dry season. In the rainy season, however, most species were found in simple-shade agroforests, and complex agroforestry being intermediate. Foraging coffee ants species composition did not change differently according to agroforestry type and season. Results show that shade appears to be most important in the dry seasons, while a mosaic of different land-use types may provide adequate environmental conditions to ant species, maximizing landscape-wide richness throughout the year. © 2010 Entomological Society of America

  17. Solar Shading in Low Energy Office Buildings - Design Strategy and User Perception

    Directory of Open Access Journals (Sweden)

    Steinar Grynning

    2017-06-01

    Full Text Available The objective of this paper is to investigate the visual comfort and quality of daylight in modern office buildings in the Nordic climate. A study of various daylight-related aspects and qualities was carried out for three different office buildings, using a combination of quantitative and qualitative methods. The focus was on a combination of user perception of daylight quality and assessment of the daylight amount and quality, by using the daylight factor (DF and useful daylight illuminance parameters. Previous studies and experiences from construction examples indicate that users, in general, complain about lack of manual control of systems and too low daylight levels, even if the requirements in the building codes are satisfied. Furthermore, they complain about control algorithms of the shading devices, which cause undesired automatic opening and closure of such devices. Thus, causing disturbances and irritation amongst the users. Hence, interviews with key personnel in a modern and architecturally acclaimed office building were carried out in addition to an in-depth analysis of previous surveys of a zero-energy office building. It was found that automatic moveable shading can be regarded as a source of discomfort. This is due to the lack of manual-control override possibilities, which causes disturbances due to the system moving up and down. In one of the offices, the users disabled the exterior shading system. However, the external fixed shading and the internal manually operated roller blinds were found to be satisfactory. The results from a previous study showed that the users in the Marche building are in general satisfied with the daylight. One of the main reasons for this, according to the users, is that they have manual control of the shading system. Manual control of the shading systems is preferred by users in the office buildings studied. Daylight simulations showed that the external fixed shading system combined with internal

  18. Shade guide optimization--a novel shade arrangement principle for both ceramic and composite shade guides when identifying composite test objects.

    Science.gov (United States)

    Østervemb, Niels; Jørgensen, Jette Nedergaard; Hørsted-Bindslev, Preben

    2011-02-01

    The most widely used shade guide for composite materials is made of ceramic and arranged according to a non-proven method. There is a need for a composite shade guide using a scientifically based arrangement principle. To compare the shade tab arrangement of the Vitapan Classical shade guide and an individually made composite shade guide using both the originally proposed arrangement principle and arranged according to ΔE2000 values with hue group division. An individual composite shade guide made from Filtek Supreme XT body colors was compared to the Vitapan Classical shade guide. Twenty-five students matched color samples made from Filtek Supreme XT body colors using the two shade guides arranged after the two proposed principles--four shade guides in total. Age, sequence, gender, time, and number of correct matches were recorded. The proposed visually optimal composite shade guide was both fastest and had the highest number of correct matches. Gender was significantly associated with time used for color sampling but not regarding the number of correct shade matches. A composite shade guide is superior compared to the ceramic Vitapan Classical guide when using composite test objects. A rearrangement of the shade guide according to hue, subdivided according to ΔE2000, significantly reduces the time needed to take a color sample and increases the number of correct shade matches. Total color difference in relation to the lightest tab with hue group division is recommended as a possible and universally applicable mode of tab arrangement in dental color standards. Moreover, a shade guide made of the composite materials itself is to be preferred as both a faster and more accurate method of determining color. © 2011, COPYRIGHT THE AUTHORS. JOURNAL COMPILATION © 2011, WILEY PERIODICALS, INC.

  19. Commissioning of the SPARC Movable Emittance Meter and Its First Operation at PITZ

    CERN Document Server

    Catani, L; Cianchi, A

    2005-01-01

    For the SPARC Project a novel diagnostic device, called "Emittance-meter", has been conceived and constructed to perform a detailed study of the emittance compensation process in the SPARC photo-injector and to optimize the RF-gun and the accelerator working point. It consists of a movable emittance measurement system, based on the 1D pepper-pot method, installed between two long bellows with the possibility to scan a region 1.5 m long downstream the RF-gun. The construction of the device was completed in the first part of this year and a series of laboratory tests, to evaluate its performances, were carried out in Spring 2005. At the beginning of the summer the complete system was moved to DESY at Zeuthen to be installed on the Photo Injector Test Facility PITZ. After the commissioning it will used for measurements of the PITZ electron beam in the framework of a collaboration between the SPARC and PITZ Projects aiming on studies and operations with photo injectors.

  20. Design, simulation and fabrication of a novel contact-enhanced MEMS inertial switch with a movable contact point

    International Nuclear Information System (INIS)

    Cai Haogang; Ding Guifu; Yang Zhuoqing; Su Zhijuan; Zhou Jiansheng; Wang Hong

    2008-01-01

    A novel inertial switch based on a micro-electro-mechanical system (MEMS) was designed, which consists of three main parts: a proof mass as the movable electrode, a cross beam as the stationary electrode and a movable contact point to prolong the contact time. A MATLAB/Simulink model, which had been verified by comparison with ANSYS transient simulation, was built to simulate the dynamic response, based on which the contact-enhancing mechanism was confirmed and the dependence of threshold acceleration on the proof mass thickness was studied. The simulated dynamic responses under various accelerations exhibit satisfactory device behaviors: the switch-on time is prolonged under transient acceleration; the switch-on state is more continuous than the conventional design under long lasting acceleration. The inertial micro-switch was fabricated by multilayer electroplating technology and then tested by a drop hammer experiment. The test results indicate that the contact effect was improved significantly and a steady switch-on time of over 50 µs was observed under half-sine wave acceleration with 1 ms duration, in agreement with the dynamic simulation

  1. Minimisation of Power loss from partially shaded solar cell arrays

    Energy Technology Data Exchange (ETDEWEB)

    Maine, Tony; Bell, John [Queensland University of Technology, Brisbane (Australia). Built Environment Engineering; Martin, Stewart [University of South Australia, Mawson Lakes Campus, SA (Australia). School of Electrical and Information Engineering

    2008-07-01

    In conventional wiring schemes the output from a partially shaded solar cell array drops rapidly to that of the fully shaded array even when only a small fraction is shaded. In this paper circuit simulation has been used to show that by dynamically reconfiguring the array, the power losses due to shading can be significantly reduced. Reconfiguration is achieved by using switching microcircuits with on-chip photo detectors to determine which parts of the array are in shade. The currents from the shaded and unshaded sections of the array are separated and then connected in parallel to a maximum power point tracker. It is shown that by using this reconfiguration that the power output from a partially shaded array can be increased by at least 100% compared with that from a conventional series connected array over a range of shading conditions. (orig.)

  2. USGS Hill Shade Base Map Service from The National Map

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — USGS Hill Shade (or Shaded Relief) is a tile cache base map created from the National Elevation Dataset (NED), a seamless dataset of best available raster elevation...

  3. Experimental and Numerical Analysis of Modelling of Solar Shading

    DEFF Research Database (Denmark)

    Winther, Frederik Vildbrad; Liu, Mingzhe; Heiselberg, Per

    2017-01-01

    The use of solar shading in future low energy office buildings is essential for minimizing energy consumption for building services, while maintaining thermal conditions. Implementing solar shading technologies in energy calculations and thermal building simulation programs is essential in order...... to demonstrate the effect of adaptive solar shading. In order to document the benefits of the shading technology, the description of the shading device in the thermal building simulation software must be described at a reasonably accurate level, related to the specific solar shading device. This research...... presents different approaches for modeling solar shading devices, demonstrating the level of accuracy in relation to measurement conducted in a full-scale façade test facility at Aalborg University. The research bridges the gap between increased complexity of solar shading technologies and the use...

  4. Solar shading control strategy for office buildings in cold climate

    DEFF Research Database (Denmark)

    Røseth Karlsen, Line; Heiselberg, Per Kvols; Bryn, Ida

    2016-01-01

    Highlights •Solar shading control strategy for office buildings in cold climate is developed. •Satisfying energy and indoor environmental performance is confirmed. •Importance of integrated evaluations when selecting shading strategy is illustrated.......Highlights •Solar shading control strategy for office buildings in cold climate is developed. •Satisfying energy and indoor environmental performance is confirmed. •Importance of integrated evaluations when selecting shading strategy is illustrated....

  5. Plants' responses to drought and shade environments

    African Journals Online (AJOL)

    전병기

    Among them, drought is widely known as the main factor that limits plants' growth, productivity and development (Reddy et al., 2004; Shao et al., 2008; Li et al., 2009). Recently, drought occured frequently all over the globe due to climate changes (Khaine and Woo, 2015). Light and shade are very important environements ...

  6. Effects of street tree shade on asphalt concrete pavement performance

    Science.gov (United States)

    E.G. McPherson; J. Muchnick

    2005-01-01

    Forty-eight street segments were paired into 24 high-and low-shade pairs in Modesto, California, U.S. Field data were collected to calculate a Pavement Condition Index (PCI) and Tree Shade Index (TSI) for each segment. Statistical analyses found that greater PCI was associated with greater TSI, indicating that tree shade was partially responsible for reduced pavement...

  7. THE 3 - IN - 1 SKYLIGHT SHADING DEVICE FOR SURABAYA INDONESIA: AN ENERGY SAVING AND CONSIDERATIONS

    Directory of Open Access Journals (Sweden)

    Danny Santoso Mintorogo

    2004-01-01

    Full Text Available In terms of energy saving strategies and proper use of skylight modules in architectural buildings in the tropical climate, this paper will give evidence of how appropriate use of skylight modules installed on buildings in the tropical zone compared to the ones in the subtropical climate. In the tropical humid climate, Indonesia has received huge amount of global direct and diffuse radiations on horizontal roofs throughout the year, approximately 575 watts per square meter of radiation will impact on flat roofs or skylights on a sunny day in Surabaya city. Moreover, the hot season is longer, from mid May to mid December, than the wet season. Most of the commercial and institution buildings are equipped with Western skylight styles in Surabaya without any modifications. The three-in-one skylight device is the system that will control daylight, shade direct solar heat radiation, and collect solar hot water at the same time. The concept of the three-in-one shading device has three goals: first of all, it is to shade horizontal or tiled skylight on roof providing shading devices. Secondly, the series of circular cube as shading device will bounce and scatter the direct sunlight into the space below enhancing daylight patterns. Finally, while shading and bouncing direct sunlight, those series of circular shading water pipes would also collect the solar heat radiation getting hot water. Each system works nicely to block, to scatter, and to obtain the solar heat radiation for energy saving in green architecture and clean environmental living zones.

  8. Investigating the Impact of Shading Effect on the Characteristics of a Large-Scale Grid-Connected PV Power Plant in Northwest China

    Directory of Open Access Journals (Sweden)

    Yunlin Sun

    2014-01-01

    Full Text Available Northwest China is an ideal region for large-scale grid-connected PV system installation due to its abundant solar radiation and vast areas. For grid-connected PV systems in this region, one of the key issues is how to reduce the shading effect as much as possible to maximize their power generation. In this paper, a shading simulation model for PV modules is established and its reliability is verified under the standard testing condition (STC in laboratory. Based on the investigation result of a 20 MWp grid-connected PV plant in northwest China, the typical shading phenomena are classified and analyzed individually, such as power distribution buildings shading and wire poles shading, plants and birds droppings shading, and front-row PV arrays shading. A series of experiments is also conducted on-site to evaluate and compare the impacts of different typical shading forms. Finally, some feasible solutions are proposed to avoid or reduce the shading effect of PV system during operation in such region.

  9. Fast shading correction for cone beam CT in radiation therapy via sparse sampling on planning CT.

    Science.gov (United States)

    Shi, Linxi; Tsui, Tiffany; Wei, Jikun; Zhu, Lei

    2017-05-01

    The image quality of cone beam computed tomography (CBCT) is limited by severe shading artifacts, hindering its quantitative applications in radiation therapy. In this work, we propose an image-domain shading correction method using planning CT (pCT) as prior information which is highly adaptive to clinical environment. We propose to perform shading correction via sparse sampling on pCT. The method starts with a coarse mapping between the first-pass CBCT images obtained from the Varian TrueBeam system and the pCT. The scatter correction method embedded in the Varian commercial software removes some image errors but the CBCT images still contain severe shading artifacts. The difference images between the mapped pCT and the CBCT are considered as shading errors, but only sparse shading samples are selected for correction using empirical constraints to avoid carrying over false information from pCT. A Fourier-Transform-based technique, referred to as local filtration, is proposed to efficiently process the sparse data for effective shading correction. The performance of the proposed method is evaluated on one anthropomorphic pelvis phantom and 17 patients, who were scheduled for radiation therapy. (The codes of the proposed method and sample data can be downloaded from https://sites.google.com/view/linxicbct) RESULTS: The proposed shading correction substantially improves the CBCT image quality on both the phantom and the patients to a level close to that of the pCT images. On the phantom, the spatial nonuniformity (SNU) difference between CBCT and pCT is reduced from 74 to 1 HU. The root of mean square difference of SNU between CBCT and pCT is reduced from 83 to 10 HU on the pelvis patients, and from 101 to 12 HU on the thorax patients. The robustness of the proposed shading correction is fully investigated with simulated registration errors between CBCT and pCT on the phantom and mis-registration on patients. The sparse sampling scheme of our method successfully

  10. A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building

    Energy Technology Data Exchange (ETDEWEB)

    Lee, E. S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fernandes, L. L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Coffey, B. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McNeil, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Clear, R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Webster, T. [Univ. of California, Berkeley, CA (United States); Bauman, F. [Univ. of California, Berkeley, CA (United States); Dickerhoff, D. [Univ. of California, Berkeley, CA (United States); Heinzerling, D. [Univ. of California, Berkeley, CA (United States); Hoyt, T. [Univ. of California, Berkeley, CA (United States)

    2013-01-01

    With aggressive goals to reduce national energy use and carbon emissions, the U.S. Department of Energy (DOE) will be looking to exemplary buildings that have already invested in new approaches to achieving the energy performance goals now needed at a national level. The New York Times Building, in New York, New York, incorporates a number of innovative technologies, systems and processes and could become model for widespread replication in new and existing buildings. A year-long monitored study was conducted to verify energy performance, assess occupant comfort and satisfaction with the indoor environment, and evaluate impact on maintenance and operations. Lessons learned were derived from the analysis; these lessons could help identify and shape policy, financial, or supporting strategies to accelerate diffusion in the commercial building market.

  11. A post-occupancy monitored evaluation of the dimmable lighting, automated shading, and underfloor air distribution system in The New York Times Building

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eleanor S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fernandes, Luis L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Coffey, Brian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McNeil, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Clear, Robert [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Webster, Tom [Univ. of California, Berkeley, CA (United States); Bauman, Fred [Univ. of California, Berkeley, CA (United States); Dickerhoff, Darryl [Univ. of California, Berkeley, CA (United States); Heinzerling, David [Univ. of California, Berkeley, CA (United States); Hoyt, Tyler [Univ. of California, Berkeley, CA (United States)

    2013-01-01

    With aggressive goals to reduce national energy use and carbon emissions, the US Department of Energy will be looking to exemplary buildings that have already invested in new approaches to achieving the energy performance goals now needed at a national level. The New York Times Building, in New York, New York, incorporates a number of innovative technologies, systems and processes and could become a model for widespread replication in new and existing buildings. Post-occupancy data are invaluable in establishing confidence in innovation. A year-long monitored study was conducted to verify energy performance, assess occupant comfort and satisfaction with the indoor environment, and evaluate impacts on maintenance and operations. Lessons learned were derived from the analysis; these lessons could help identify and shape policy, financial, or supporting strategies to accelerate diffusion in the commercial building market.

  12. Initial Development of Four Forest Species in Different Shading Conditions

    Directory of Open Access Journals (Sweden)

    C. C. Silva

    2013-07-01

    Full Text Available Abstract: Evaluated the initial development through destructive and non-destructive sampling, forest species Adenanthera pavonina, Cassia fistula, Parkia pendula and Hymenolobium petraeum, propagated by seeds at different levels of shading screens black poliefinas (0, 50 and 65% , in the region of Sinop, MT. There were no significant interactions between time and level of shading to any variable. Changes in fresh and dry weight at all levels of shading occurred from 30 DAT. The highest rates of growth were observed in 50% shading to A. pavonina, P. pendula and H. petraeum and 65% shading for C. fistula.Keywords: seedling, growth, physiology, climatic conditions.

  13. Tracking the global maximum power point of PV arrays under partial shading conditions

    Science.gov (United States)

    Fennich, Meryem

    This thesis presents the theoretical and simulation studies of the global maximum power point tracking (MPPT) for photovoltaic systems under partial shading. The main goal is to track the maximum power point of the photovoltaic module so that the maximum possible power can be extracted from the photovoltaic panels. When several panels are connected in series with some of them shaded partially either due to clouds or shadows from neighboring buildings, several local maxima appear in the power vs. voltage curve. A power increment based MPPT algorithm is effective in identifying the global maximum from the several local maxima. Several existing MPPT algorithms are explored and the state-of-the-art power increment method is simulated and tested for various partial shading conditions. The current-voltage and power-voltage characteristics of the PV model are studied under different partial shading conditions, along with five different cases demonstrating how the MPPT algorithm performs when shading switches from one state to another. Each case is supplemented with simulation results. The method of tracking the Global MPP is based on controlling the DC-DC converter connected to the output of the PV array. A complete system simulation including the PV array, the direct current to direct current (DC-DC) converter and the MPPT is presented and tested using MATLAB software. The simulation results show that the MPPT algorithm works very well with the buck converter, while the boost converter needs further changes and implementation.

  14. Consistency in color parameters of a commonly used shade guide.

    Science.gov (United States)

    Tashkandi, Esam

    2010-01-01

    The use of shade guides to assess the color of natural teeth subjectively remains one of the most common means for dental shade assessment. Any variation in the color parameters of the different shade guides may lead to significant clinical implications. Particularly, since the communication between the clinic and the dental laboratory is based on using the shade guide designation. The purpose of this study was to investigate the consistency of the L∗a∗b∗ color parameters of a sample of a commonly used shade guide. The color parameters of a total of 100 VITAPAN Classical Vacuum shade guide (VITA Zahnfabrik, Bad Säckingen, Germany(were measured using a X-Rite ColorEye 7000A Spectrophotometer (Grand Rapids, Michigan, USA). Each shade guide consists of 16 tabs with different designations. Each shade tab was measured five times and the average values were calculated. The ΔE between the average L∗a∗b∗ value for each shade tab and the average of the 100 shade tabs of the same designation was calculated. Using the Student t-test analysis, no significant differences were found among the measured sample. There is a high consistency level in terms of color parameters of the measured VITAPAN Classical Vacuum shade guide sample tested.

  15. PASTURE SHADING STRATEGIES: CASE STUDY

    Directory of Open Access Journals (Sweden)

    Nomaiací de Andrade

    2011-12-01

    Full Text Available Climate changes affect animals’ metabolism in a general way, resulting in an increase of heat stress and productivity decrease. Among viable alternatives to ameliote this situation, the most indicated is reforestation of pasture areas due to the great ecological benefit given to animals and the environment as a whole. The intercropping between trees and animals is called silvopastoral system, and represents a promising alternative to current means of production. For a correct deployment of this system it is necessary to consider some characteristics of the land and the environment concerned, to avoid loss and competition between members of the system, in other words, between tree and fodder species.

  16. Uniform versus asymmetric shading mediates crown recession in conifers.

    Directory of Open Access Journals (Sweden)

    Amanda L Schoonmaker

    Full Text Available In this study we explore the impact of asymmetrical vs. uniform crown shading on the mortality and growth of upper and lower branches within tree crowns, for two conifer species: shade intolerant lodgepole pine (Pinus contorta and shade tolerant white spruce (Picea glauca. We also explore xylem hydraulics, foliar nutrition, and carbohydrate status as drivers for growth and expansion of the lower and upper branches in various types of shading. This study was conducted over a two-year period across 10 regenerating forest sites dominated by lodgepole pine and white spruce, in the lower foothills of Alberta, Canada. Trees were assigned to one of four shading treatments: (1, complete uniform shading of the entire tree, (2 light asymmetric shading where the lower 1/4-1/3 of the tree crown was shaded, (3 heavy asymmetric shading as in (2 except with greater light reduction and (4 control in which no artificial shading occurred and most of the entire crown was exposed to full light. Asymmetrical shading of only the lower crown had a larger negative impact on the bud expansion and growth than did uniform shading, and the effect was stronger in pine relative to spruce. In addition, lower branches in pine also had lower carbon reserves, and reduced xylem-area specific conductivity compared to spruce. For both species, but particularly the pine, the needles of lower branches tended to store less C than upper branches in the asymmetric shade, which could suggest a movement of reserves away from the lower branches. The implications of these findings correspond with the inherent shade tolerance and self-pruning behavior of these conifers and supports a carbon based mechanism for branch mortality--mediated by an asymmetry in light exposure of the crown.

  17. Digital Shaded-Relief Image of Alaska

    Science.gov (United States)

    Riehle, J.R.; Fleming, Michael D.; Molnia, B.F.; Dover, J.H.; Kelley, J.S.; Miller, M.L.; Nokleberg, W.J.; Plafker, George; Till, A.B.

    1997-01-01

    Introduction One of the most spectacular physiographic images of the conterminous United States, and the first to have been produced digitally, is that by Thelin and Pike (USGS I-2206, 1991). The image is remarkable for its crispness of detail and for the natural appearance of the artificial land surface. Our goal has been to produce a shaded-relief image of Alaska that has the same look and feel as the Thelin and Pike image. The Alaskan image could have been produced at the same scale as its lower 48 counterpart (1:3,500,000). But by insetting the Aleutian Islands into the Gulf of Alaska, we were able to print the Alaska map at a larger scale (1:2,500,000) and about the same physical size as the Thelin and Pike image. Benefits of the 1:2,500,000 scale are (1) greater resolution of topographic features and (2) ease of reference to the U.S. Geological Survey (USGS) (1987) Alaska Map E and the statewide geologic map (Beikman, 1980), which are both 1:2,500,000 scale. Manually drawn, shaded-relief images of Alaska's land surface have long been available (for example, Department of the Interior, 1909; Raisz, 1948). The topography depicted on these early maps is mainly schematic. Maps showing topographic contours were first available for the entire State in 1953 (USGS, 1:250,000) (J.H. Wittmann, USGS, written commun., 1996). The Alaska Map E was initially released in 1954 in both planimetric (revised in 1973 and 1987) and shaded-relief versions (revised in 1973, 1987, and 1996); topography depicted on the shaded-relief version is based on the 1:250,000-scale USGS topographic maps. Alaska Map E was later modified to include hypsometric tinting by Raven Maps and Images (1989, revised 1993) as copyrighted versions. Other shaded-relief images were produced for The National Geographic Magazine (LaGorce, 1956; 1:3,000,000) or drawn by Harrison (1970; 1:7,500,000) for The National Atlas of the United States. Recently, the State of Alaska digitally produced a shaded-relief image

  18. ATOMLLL: atoms with shading and highlights

    International Nuclear Information System (INIS)

    Max, N.L.; y.

    1979-01-01

    The ATOMS program, written at Bell Telephone Laboratory, is capable of determining the visible portions of a scene consisting of interpenetrating spheres and cylinders, put together to represent space-filling or ball-and-stick molecular models. The Lawrence Livermore Laboratory version contains enhancements to add shading and highlights, and to render the spheres on film as ellipses, so they will appear round when projected in various wide-screen formats. The visible parts of each sphere or cylinder are shaded by a minicomputer controlling the film recorder, thus releasing the main computer from transferring the millions of intensity values for each frame. The minicomputer is microprogrammed with an efficient algorithm for the intensities, which uses the color look-up tables in the film recorder to store the reflectance as a function of angle of incidence. 8 references

  19. Combined surface and volumetric occlusion shading

    KAUST Repository

    Schott, Matthias O.; Martin, Tobias; Grosset, A. V Pascal; Brownlee, Carson; Hollt, Thomas; Brown, Benjamin P.; Smith, Sean T.; Hansen, Charles D.

    2012-01-01

    In this paper, a method for interactive direct volume rendering is proposed that computes ambient occlusion effects for visualizations that combine both volumetric and geometric primitives, specifically tube shaped geometric objects representing streamlines, magnetic field lines or DTI fiber tracts. The proposed algorithm extends the recently proposed Directional Occlusion Shading model to allow the rendering of those geometric shapes in combination with a context providing 3D volume, considering mutual occlusion between structures represented by a volume or geometry. © 2012 IEEE.

  20. Combined surface and volumetric occlusion shading

    KAUST Repository

    Schott, Matthias O.

    2012-02-01

    In this paper, a method for interactive direct volume rendering is proposed that computes ambient occlusion effects for visualizations that combine both volumetric and geometric primitives, specifically tube shaped geometric objects representing streamlines, magnetic field lines or DTI fiber tracts. The proposed algorithm extends the recently proposed Directional Occlusion Shading model to allow the rendering of those geometric shapes in combination with a context providing 3D volume, considering mutual occlusion between structures represented by a volume or geometry. © 2012 IEEE.

  1. Analysis of Heat Stress and the Indoor Climate Control Requirements for Movable Refuge Chambers.

    Science.gov (United States)

    Hao, Xiaoli; Guo, Chenxin; Lin, Yaolin; Wang, Haiqiao; Liu, Heqing

    2016-05-20

    Movable refuge chambers are a new kind of rescue device for underground mining, which is believed to have a potential positive impact on reducing the rate of fatalities. It is likely to be hot and humid inside a movable refuge chamber due to the metabolism of trapped miners, heat generated by equipment and heat transferred from outside. To investigate the heat stress experienced by miners trapped in a movable refuge chamber, the predicted heat strain (PHS) model was used to simulate the heat transfer process between the person and the thermal environment. The variations of heat stress with the temperature and humidity inside the refuge chamber were analyzed. The effects of air temperature outside the refuge chamber and the overall heat transfer coefficient of the refuge chamber shell on the heat stress inside the refuge chamber was also investigated. The relationship between the limit of exposure duration and the air temperature and humidity was numerically analyzed to determine the upper limits of temperature and humidity inside a refuge chamber. Air temperature of 32 °C and relative humidity of 70% are recommended as the design standard for internal thermal environment control of movable refuge chambers.

  2. Quantum theory of shuttling instability in a movable quantum dot array

    DEFF Research Database (Denmark)

    Donarini, Andrea; Novotny, Tomas; Jauho, Antti-Pekka

    2004-01-01

    We study the shuttling instability in an array of three quantum dots the central one of which is movable. We extend the results by Armour and MacKinnon on this problem to a broader parameter regime. The results obtained by an efficient numerical method are interpreted directly using the Wigner...

  3. Spatial variability of the wave bottom boundary layer over movable rippled beds

    NARCIS (Netherlands)

    Rodriguez-Abudo, S.; Foster, D.L.; Henriquez, M.

    2013-01-01

    Observations of the spatially dependent velocity field over movable bed forms subjected to slightly skewed and asymmetric regular wave forcing were collected. The dynamics between the ripple elements is dominated by coherent vortices, characterized by the swirling strength, and evidenced in the

  4. Analysis of Heat Stress and the Indoor Climate Control Requirements for Movable Refuge Chambers

    Directory of Open Access Journals (Sweden)

    Xiaoli Hao

    2016-05-01

    Full Text Available Movable refuge chambers are a new kind of rescue device for underground mining, which is believed to have a potential positive impact on reducing the rate of fatalities. It is likely to be hot and humid inside a movable refuge chamber due to the metabolism of trapped miners, heat generated by equipment and heat transferred from outside. To investigate the heat stress experienced by miners trapped in a movable refuge chamber, the predicted heat strain (PHS model was used to simulate the heat transfer process between the person and the thermal environment. The variations of heat stress with the temperature and humidity inside the refuge chamber were analyzed. The effects of air temperature outside the refuge chamber and the overall heat transfer coefficient of the refuge chamber shell on the heat stress inside the refuge chamber was also investigated. The relationship between the limit of exposure duration and the air temperature and humidity was numerically analyzed to determine the upper limits of temperature and humidity inside a refuge chamber. Air temperature of 32 °C and relative humidity of 70% are recommended as the design standard for internal thermal environment control of movable refuge chambers.

  5. 78 FR 13747 - Safety Advisory 2013-01; Passing Stop Signals Protecting Movable Bridges

    Science.gov (United States)

    2013-02-28

    ... Association Manual for Railway Engineering. 2. Evaluate operating rules and procedures that permit the...: (1) Evaluate the design and construction of existing movable bridges to determine if effective span... perform these duties. FOR FURTHER INFORMATION CONTACT: Carlo M. Patrick, Staff Director, Rail and...

  6. Mechanical design control and implementation of a new movable intensity profile beamline monitor for the TRIUMF parity experiment 497

    Science.gov (United States)

    Ries, Thomas C.

    1995-05-01

    Two new movable beam intensity profile monitors have been installed into the TRIUMF Parity Experiment 497 Beamlines. Each unit serves two functions. Firstly, the beam median position, in a plane normal to the beam, is detected by split plate Secondary Emission Monitors. This information is used to lock the beam into the position of the movable monitor to within a few μm's via high band width ferrite core steering magnets operating in tandem in a closed loop servo feedback control system. Secondly, the beam profile and intensity is detected via a multi-wire secondary emission non-movable monitor, where the data provides high precision values regarding centroidal positions and profiles. The centroid position of the beam is statistically determined to an accuracy of ±10 μm from a data record length of 1 second. The design of each device adheres to strict standards of mechanically rigid construction. The split plate SEM accuracy and repeatability is better than 15 μm with an absolute resolution limit of 0.4 μm. Maximum travel is 2 inches in the vertical plane. Since the device is mechanically modular and both degrees of freedom are combined into a single mechanical unit, fast and easy handling is possible for maintenance in radioactive areas. The actuators are dc servo motors with tachometers driven by linear servo power amplifiers. These amplifiers are used in lieu of pulse width modulated amps to eliminate noise produced by the switching circuits. Position sensing is done by variable reluctance type absolute rotary encoders providing 16 bit resolution over the full range of travel. Positioning is done manually using a self centring potentiometer on the control panel that provides a ± velocity command signal to the power amplifiers. This configuration ensures good controllability over a very large range of positioning speeds hence making 0.4 μm incremental positioning possible, as well as, fast relocations over large relative distances. The precision movement

  7. Maximum power point tracking of partially shaded solar photovoltaic arrays

    Energy Technology Data Exchange (ETDEWEB)

    Roy Chowdhury, Shubhajit; Saha, Hiranmay [IC Design and Fabrication Centre, Department of Electronics and Telecommunication Engineering, Jadavpur University (India)

    2010-09-15

    The paper presents the simulation and hardware implementation of maximum power point (MPP) tracking of a partially shaded solar photovoltaic (PV) array using a variant of Particle Swarm Optimization known as Adaptive Perceptive Particle Swarm Optimization (APPSO). Under partially shaded conditions, the photovoltaic (PV) array characteristics get more complex with multiple maxima in the power-voltage characteristic. The paper presents an algorithmic technique to accurately track the maximum power point (MPP) of a PV array using an APPSO. The APPSO algorithm has also been validated in the current work. The proposed technique uses only one pair of sensors to control multiple PV arrays. This result in lower cost and higher accuracy of 97.7% compared to earlier obtained accuracy of 96.41% using Particle Swarm Optimization. The proposed tracking technique has been mapped onto a MSP430FG4618 microcontroller for tracking and control purposes. The whole system based on the proposed has been realized on a standard two stage power electronic system configuration. (author)

  8. Ceramic materials for porcelain veneers: part II. Effect of material, shade, and thickness on translucency.

    Science.gov (United States)

    Barizon, Karine T L; Bergeron, Cathia; Vargas, Marcos A; Qian, Fang; Cobb, Deborah S; Gratton, David G; Geraldeli, Saulo

    2014-10-01

    Information regarding the differences in translucency among new ceramic systems is lacking. The purpose of this study was to compare the relative translucency of the different types of ceramic systems indicated for porcelain veneers and to evaluate the effect of shade and thickness on translucency. Disk specimens 13 mm in diameter and 0.7-mm thick were fabricated for the following 9 materials (n=5): VITA VM9, IPS Empress Esthetic, VITA PM9, Vitablocks Mark II, Kavo Everest G-Blank, IPS Empress CAD, IPS e.max CAD, IPS e.maxPress, and Lava Zirconia. VITA VM9 served as the positive control and Lava as the negative control. The disks were fabricated with the shade that corresponds to A1. For IPS e.maxPress, additional disks were made with different shades (BL2, BL4, A1, B1, O1, O2, V1, V2, V3), thickness (0.3 mm), and translucencies (high translucency, low translucency). Color coordinates (CIE L∗ a∗ b∗) were measured with a tristimulus colorimeter. The translucency parameter was calculated from the color difference of the material on a black versus a white background. One-way ANOVA, the post hoc Tukey honestly significant difference, and the Ryan-Einot-Gabriel-Welsch multiple range tests were used to analyze the data (α=.05). Statistically significant differences in the translucency parameter were found among porcelains (PPM9, Empress Esthetic>Empress CAD>Mark II, Everest, e.max CAD>e.max Press>Lava. Significant differences also were noted when different shades and thickness were compared (Pceramic systems designed for porcelain veneers present varying degrees of translucency. The thickness and shade of lithium disilicate ceramic affect its translucency. Shade affects translucency parameter less than thickness. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  9. The Relationship between On-Farm Shade Trees and Cocoa Yields in Ghana

    DEFF Research Database (Denmark)

    Asare, Richard

    Cocoa (Theobroma cacao L.) is a crop that is widely cultivated across West Africa with Côte d’Ivoire, Cameroon, Ghana and Nigeria contributing about 70% of the global production. In Ghana cocoa contributes significantly to the national economy as over 20% of the world’s cocoa production comes from...... the country, making it the world’s second largest producer with an annual production level of over 700,000 metric tons, and an estimated cultivation area of ca. 1.6 million ha. Cocoa is mostly cultivated by smallholder farmers either as a monocrop or in association with other food crops, tree crops and under...... the cover of shade trees – cocoa agroforestry. This thesis hypothesizes that canopy cover of shade trees in low input (low-to-no fertilizer application) cocoa growing systems can contribute to cocoa yield improvements. The main theme deals with shade trees diversity and its effects on cocoa production...

  10. Two-axis movable concentrating solar energy collector

    Science.gov (United States)

    Perkins, G. S.

    1977-01-01

    Proposed solar-tracker collector assembly with boiler in fixed position, allows use of hard line connections, capable of withstanding optimum high temperature fluid flow. System thereby eliminates need for flexible or slip connection previously used with solar collector systems.

  11. A new topology to mitigate the effect of shading for small photovoltaic installations in rural sub-Saharan Africa

    International Nuclear Information System (INIS)

    Ubisse, A.; Sebitosi, A.

    2009-01-01

    Many field researchers have in the past grappled with the problems of energy loss and panel damage as a result of shading and staining of PV panels after installation. A number of solutions have been proposed to try and minimize the effects of this problem in the field. The problem with all these solutions is that they address inter-panel connection topologies for very large installations. No particular attention has been paid to the topologies of individual panels. In sub-Saharan Africa most installations are single panel solar home systems and therefore small shading can result in an entire installation being disabled. This paper aims to study the effect of shading and staining on photovoltaic modules and propose a new topology that will reduce the effect of shading on the performance of individual photovoltaic modules.

  12. Relationship between natural tooth shade and skin colour.

    Science.gov (United States)

    Nourbakhsh, M; Mousavinejad, N; Adli, A R; Harati, M

    2013-06-01

    The purpose of this study was to assess the correlation of skin colour and tooth shade. One hundred and twenty six individuals aging between 18 to 25 years participated in this study. Colour of the maxillary central incisors was examined by VITA easy shade. Tooth shades were assigned to four ordinal values. Nivea Beauty Protect Foundation shade sample was used as a guide to assess facial skin colour Shin colours were also assigned to four ordinal values. Spearman test revealed that there was a significant relationship between tooth shade and skin colour Total co-relation factor was 51.6% (p men (p <0 .01). The highest tooth shade prevalence belonged to the second group and the highest skin colour prevalence was also in the second skin colour group.

  13. Shade selection performed by novice dental professionals and colorimeter.

    Science.gov (United States)

    Klemetti, E; Matela, A-M; Haag, P; Kononen, M

    2006-01-01

    The objective of this study was to test inter-observer variability in shade selection for porcelain restorations, using three different shade guides: Vita Lumin Vacuum, Vita 3D-Master and Procera. Nineteen young dental professionals acted as observers. The results were also compared with those of a digital colorimeter (Shade Eye Ex; Shofu, Japan). Regarding repeatability, no significant differences were found between the three shade guides, although repeatability was relatively low (33-43%). Agreement with the colorimetric results was also low (8-34%). In conclusion, shade selection shows moderate to great inter-observer variation. In teaching and standardizing the shade selection procedure, a digital colorimeter may be a useful educational tool.

  14. NPC Based Design Optimization for a Net Zero Office Building in Hot Climates with PV Panels as Shading Device

    Directory of Open Access Journals (Sweden)

    Muhammad Zubair

    2018-05-01

    Full Text Available Hot areas of the world receive a high amount of solar radiation. As a result, buildings in those areas consume more energy to maintain a comfortable climate for their inhabitants. In an effort to design net-zero energy building in hot climates, PV possesses the unique advantage of generating electrical energy while protecting the building from solar irradiance. In this work, to form a net-zero energy building (NZEB, renewable resources such as solar and wind available onsite for an existing building have been analyzed in a hot climate location. PV and wind turbines in various configurations are studied to form a NZEB, where PV-only systems offer better performance than Hybrid PV Wind systems, based on net present cost (NPC. The self-shading losses in PV placed on rooftop areas are analyzed by placing parallel arrays of PV modules at various distances in between them. The effect on building cooling load by rooftop PV panels as shading devices is investigated. Furthermore, self-shading losses of PV are compared by the savings in cooling loads using PV as shading. In the case study, 12.3% saving in the cooling load of the building is observed when the building rooftop is completed shaded by PV panels; annual cooling load decreased from 3.417 GWh to 2.996 GWh, while only 1.04% shaded losses are observed for fully shaded (FS buildings compared to those with no shading (NS, as PV generation decreases from 594.39 kWh/m2 to 588.21 kWh/m2. The net present cost of the project has been decreased from US$4.77 million to US$4.41 million by simply covering the rooftop completely with PV panels, for a net-zero energy building.

  15. Net herbage accumulation rate and crude protein content of Urochloa brizantha cultivars under shade intensities

    Directory of Open Access Journals (Sweden)

    Paulo Roberto de Lima Meirelles

    2013-12-01

    Full Text Available The use of silvopastoral systems is a sustainable alternative for animal production in various regions of the Brazil. However to obtain satisfactory results in these systems, the selection of forage species that grows well in the shade should be done. The tolerance of plants to light restriction and the correctly choice of species, considering good nutritional values for these conditions has great importance. The study of artificial shading for forage production helps the clarification of issues related to the behavior of plants under reduced light prior to use in integrations with forests. The aim of the study was to evaluate the net herbage accumulation rate of forage (HAR and crude protein (CP of Urochloa brizantha cultivars (Marandu and Piatã under natural light and shading of 30 and 60%. The experiment was conducted at FMVZ - UNESP, Botucatu. The experimental design was a randomized block in factorial arrangement 3 x 2 (three shading levels: 0, 30 and 60%, two cultivars: Marandu and Piatã with three replications and repeated measures (3 cuts. Sample collection occurred when the cultivars reached 35 cm in height. The treatments with shading showed lower cutting intervals as compared to those subjected to full sunlight, because they have reached in a shorter time to time as determined cut-off criterion (mean of 37, 45 and 61 days for reduction of 60%, reduction of 30% and full sun. Significant effects (P<0.05 interaction cultivar x shade x cut on the net herbage accumulation rate (HAR. Most HAR (P<0.05 was observed for cv. Marandu 60% reduction in lightness (127 kg/ha/day due to increased production of stem during the first growing cycle. The lower HAR also occurred to Marandu, but under natural light in the third cut (34 kg/ha/day due to adverse weather conditions during the growth interval. The shadow effect and the cutting (P<0.05 affected CP. The percentage of CP on cultivars showed the highest values (average value of 9.27% in 60

  16. Comparison of Shade of Ceramic with Three Different Zirconia Substructures using Spectrophotometer.

    Science.gov (United States)

    Habib, Syed Rashid; Shiddi, Ibraheem F Al

    2015-02-01

    This study assessed how changing the Zirconia (Zr) substructure affected the color samples after they have been overlaid by the same shade of veneering ceramic. Three commercial Zr materials were tested in this study: Prettau(®) Zirconia (ZirKonZahn, Italy), Cercon (Dentsply, Germany) and InCoris ZI (Sirona, Germany). For each system, 15 disk-shaped specimens (10 × 1 mm) were fabricated. Three shades of A1, A2 and A3.5 of porcelain (IPS e.MaxCeram, IvoclarVivadent, USA) were used for layering the specimens. Five specimens from each type of Zr were layered with same shade of ceramic. Color measurements were recorderd by a spectrophotometer Color-Eye(®) 7000A (X-Rite, Grand Rapids, MI). Mean values of L, a, b color coordinates and ΔE were recorded and comparisons were made. Differences in the ΔE were recorded for the same porcelain shade with different Zr substructures and affected the color of the specimens (p < 0.01, ANOVA). The maximum difference between the ΔE values for the A1, A2 and A3.5 shades with three types of Zr substructures was found to be 1.59, 1.69 and 1.45 respectively. Multiple comparisons of the ΔE with PostHoc Tukey test revealed a statistically significant difference (p < 0.05) between the three types of Zr, except between Type 2 Zr and Type 3 Zr for the Shade A1. The mean values of L, a, b and ΔE for the Prettau(®) Zirconia substructure were found to be the least among the three types. The brand of Zr used influences the final color of the all ceramic Zr based restorations and this has clinical significance.

  17. Performance of Nellore males under different artificial shading levels in the feedlot

    Directory of Open Access Journals (Sweden)

    Diogo Alves da Costa Ferro

    2016-09-01

    Full Text Available The objective of this study was to evaluate the influence of artificial shading on weight gain and meat quality of male Nellore cattle in an intensive production system. The experiment was conducted in the experimental feedlot of the Course of Animal Science at Universidade Estadual de Goiás, from July to October 2014. Forty-eight male Nellore cattle with an average initial weight of 310 kg were kept in double 24-m2 stalls, in a total of 24 stalls. Of these, six were in the open air; six were covered with black shade netting of 30% light interception; six with black shade netting 50%; and six with black shade netting 80%, providing 6 m2 of shade per stall. The ration supplied to the animals and the orts left in the trough were weighed daily to determine intake, and the temperature-humidity index (THI was measured twice weekly. Animals were weighed for the first time at the start of the experiment, and then another three times until the end, which was followed by the slaughter and assessments of performance and meat quality. A difference (p 0.05 was observed for feed intake, initial weight, final weight, total weight gain, average daily weight gain, carcass yield, marbling, texture, fatness, backfat thickness, loin-eye area, color, thigh length and circumference, leg length and circumference, or carcass length between the animals on the different treatments. The use of artificial shading does not have a significant effect on performance or meat quality of feedlot Nellore cattle when the ambient temperature is within the thermal comfort zone.

  18. STUDIES OF SHADING LEVELS AND NUTRITION SOURCES ON GROWTH, YIELD

    Directory of Open Access Journals (Sweden)

    Edi Purwanto

    2011-10-01

    Full Text Available Growth and biochemical content of medicinal crops are influenced by agroecosystems characteristics . The objective of this research was to determine the optimum shading level and type of fertilizer as sources of nutrition on the growth, yield, and andrographolide content of sambiloto. The experiment used Split Plot Design with basic design of Randomized Complete Block Design arranged with two treatment factors, with three replications. The first factor as the main plot was shading levels, namely without shading, 25% shading, 50% shading, and 75% shading. The second factor as the sub plot was sources of nutrition reprented by type of fertilizer, namely NPK fertilizer, cow stable fertilizer, and compost fertilizer. The result of research indicated that shading level and the kind of nutrition influenced some growth and yield variables such as number of leaves, number of branches, plant height, plant dry weight and simplisia weight, and andrographolide content. Interaction of shading level at 25% and straw compost fertilizer performed best in growth characteristics, while the highest andrographolide content resulted from the treatment combination of 50% shading level and straw compost fertilizer.

  19. Effects of shading on Vallisneria natans (Lour. H. Hara growth

    Directory of Open Access Journals (Sweden)

    Fox A.D.

    2013-08-01

    Full Text Available Effects of surface shading were measured on above- and below-ground biomass and fruit production of Vallisneria natans (Lour. H. Hara plants grown from seed in replicated microcosm experiments, based on a control (no shading and four treatments (25%, 50%, 75% and 90% shading. Above- and below-ground biomass was significantly reduced at treatments above 50% shading and first pistillate and staminate florescence dates were significantly delayed above 75% and 50% shading, respectively. Ratios of mature to unripe fruits produced (both in number or dry weight did not differ between shading treatments, but dry weight fruit production was significantly reduced at 90% shading. We conclude that above 50% surface shading, V. natans plants suffer reductions in accumulated biomass and investment in sexual reproduction. We contend that recent expansions in the extent of the native floating water chestnut Trapa spp. at seasonally inundated wetlands in the Yangtze River floodplain could, by shading, have contributed to the reduction in annual biomass and seed production of V. natans, contributing to declines in distribution and abundance.

  20. Photovoltaics in the shade : One bypass diode per solar cell revisited

    NARCIS (Netherlands)

    Pannebakker, Boudewijn B.; de Waal, Arjen C.; van Sark, Wilfried G.J.H.M.

    2017-01-01

    Deployment of residential photovoltaic solar energy systems is strongly increasing, which gives rise to problems such as partial shading and pollution, omnipresent in the built environment. Conventional modules are sensitive to the current mismatches introduced by shadows because of their series

  1. Interactions between carbon sequestration and shade tree diversity in a smallholder coffee cooperative in El Salvador.

    Science.gov (United States)

    Richards, Meryl Breton; Méndez, V Ernesto

    2014-04-01

    Agroforestry systems have substantial potential to conserve native biodiversity and provide ecosystem services. In particular, agroforestry systems have the potential to conserve native tree diversity and sequester carbon for climate change mitigation. However, little research has been conducted on the temporal stability of species diversity and aboveground carbon stocks in these systems or the relation between species diversity and aboveground carbon sequestration. We measured changes in shade-tree diversity and shade-tree carbon stocks in 14 plots of a 35-ha coffee cooperative over 9 years and analyzed relations between species diversity and carbon sequestration. Carbon sequestration was positively correlated with initial species richness of shade trees. Species diversity of shade trees did not change significantly over the study period, but carbon stocks increased due to tree growth. Our results show a potential for carbon sequestration and long-term biodiversity conservation in smallholder coffee agroforestry systems and illustrate the opportunity for synergies between biodiversity conservation and climate change mitigation. © 2013 Society for Conservation Biology.

  2. Bali, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    The volcanic nature of the island of Bali is evident in this shaded relief image generated with data from the Shuttle Radar Topography Mission (SRTM).Bali, along with several smaller islands, make up one of the 27 Provinces of Indonesia. It lies over a major subduction zone where the Indo-Australian tectonic plate collides with the Sunda plate, creating one of the most volcanically active regions on the planet.The most significant feature on Bali is Gunung Agung, the symmetric, conical mountain at the right-center of the image. This 'stratovolcano,' 3,148 meters (10,308 feet) high, is held sacred in Balinese culture, and last erupted in 1963 after being dormant and thought inactive for 120 years. This violent event resulted in over 1,000 deaths, and coincided with a purification ceremony called Eka Dasa Rudra, meant to restore the balance between nature and man. This most important Balinese rite is held only once per century, and the almost exact correspondence between the beginning of the ceremony and the eruption is though to have great religious significance.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot

  3. Colored Height and Shaded Relief, Kamchatka Peninsula

    Science.gov (United States)

    2002-01-01

    Russia's Kamchatka Peninsula, lying between the Sea of Okhotsk to the west and the Bering Sea and Pacific Ocean to the east, is one of the most active volcanic regions along the Pacific Ring of Fire. It covers an area about the size of Colorado but contains more than 100 volcanoes stretching across the 1000-kilometer-long (620-mile-long) land mass. A dozen or more of these have active vents, with the youngest located along the eastern half of the peninsula. This color-coded shaded relief image, generated with data from the Shuttle Radar Topography Mission (SRTM), shows Kamchatka's volcanic nature to dramatic effect.Kliuchevskoi, one of the most active and renowned volcanoes in the world, dominates the main cluster of volcanoes called the Kliuchi group, visible as a circular feature in the center-right of the image. The two other main volcanic ranges lie along northeast-southwest lines, with the older, less active range occupying the center and western half of Kamchatka. The younger, more active belt begins at the southernmost point of the peninsula and continues upward along the Pacific coastline.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction, so northern slopes appear bright and southern slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and brown to white at the highest elevations.The Shuttle Radar Topography Mission flew aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (200

  4. Sinai Peninsula, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    The Sinai Peninsula, located between Africa and Asia, is a result of those two continents pulling apart from each other. Earth's crust is cracking, stretching, and lowering along the two northern branches of the Red Sea, namely the Gulf of Suez, seen here on the west (left), and the Gulf of Aqaba, seen to the east (right). This color-coded shaded relief image shows the triangular nature of the peninsula, with the coast of the Mediterranean Sea forming the northern side of the triangle. The Suez Canal can be seen as the narrow vertical blue line in the upper left connecting the Red Sea to the Mediterranean. The peninsula is divided into three distinct parts; the northern region consisting chiefly of sandstone, plains and hills, the central area dominated by the Tih Plateau, and the mountainous southern region where towering peaks abound. Much of the Sinai is deeply dissected by river valleys, or wadis, that eroded during an earlier geologic period and break the surface of the plateau into a series of detached massifs with a few scattered oases. Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed

  5. Influência de ventilação e aspersão em sistemas de sombreamento artificial para vacas em lactação em condições de calor Influence of the ventilation and sprinkling in artificial shading system for dairy cows in hot climate

    Directory of Open Access Journals (Sweden)

    Irenilza de A. Nääs

    2001-04-01

    Full Text Available O presente trabalho foi desenvolvido na Estação Central do Instituto de Zootecnia, localizada em Nova Odessa, SP, e teve por objetivo avaliar três diferentes métodos físicos destinados a promover a redução do estresse térmico em vacas em lactação. Os tratamentos testados foram: sombras artificiais produzidas por tela de propileno 80%; sombras idênticas às anteriores, acrescidas de ventilação, e sombras combinando ventilação e aspersão. Utilizaram-se 18 fêmeas bovinas distribuídas ao acaso dentro dos tratamentos. O experimento teve a duração de 180 dias, sendo realizado durante o período de outono. Os parâmetros avaliados foram: produção e composição do leite, temperatura retal, freqüência respiratória, freqüência cardíaca e parâmetros meteorológicos do ambiente. Os valores da produção de leite apresentaram diferenças significativas, sendo que o tratamento sombra + ventilação + aspersão, apresentou a melhor média (20,53 kg, seguido dos sombra + ventilação (19,19 kg e sombra (18,20 kg. Pela avaliação dos dados ficaram evidentes os benefícios do uso de sombras artificiais e dos sistemas de ventilação e aspersão.The present research was carried out at Animal Science Institute, in São Paulo and had the objective of evaluating three different types of cooling systems (physical to reduce thermal stress for milking cows. The tested treatments used artificial shade using a propylene screen 80% direct solar radiation reduction; the same shade using a 0.5 HP fan; and the same shade structure using a 0.5 HP fan with fogging system. Eighteen milking cows were used in the treatments - 12 Holstein cows and 6 brown swiss - equally distributed in the treatments according to their age and milk production level. The parameters analyzed were: milk production and fat content, body temperature, respiratory frequency, and cardiac frequency. Environmental parameters measured were: dry bulb, black globe temperature and

  6. Fifty shades of exploitation: Fan labor and Fifty Shades of Grey

    Directory of Open Access Journals (Sweden)

    Bethan Jones

    2014-03-01

    Full Text Available This exploration of the debates that have taken place in fandom over the ethics of pulling fan fiction and publishing it as original work draws on the notion of the fannish gift economy, which postulates that gifts such as fan fiction and fan art have value in the fannish community because they are designed to create and cement its social structure. Tension exists between fans who subscribe to the notion of a fannish gift economy and those who exploit fandom by using it to sell their pulled-to-publish works. An examination of E. L. James's 2012 Fifty Shades trilogy (comprising the books Fifty Shades of Grey, Fifty Shades Darker, and Fifty Shades Freed, which began as Twilight fan fiction, in addition to Twilight fan art sold through sites such as Redbubble and Etsy, demonstrates a tension between the two modes of fan expression: sale of artworks appears to be an acceptable practice in fandom, but the commercial sale of fan fic, even when marketed as original fiction, is widely contested.

  7. Electrodeposition of nickel onto steel, using a thermostatic cell and movable anode by a variable current

    International Nuclear Information System (INIS)

    Vega G, J.D.

    1994-01-01

    In this work, metallic coatings of nickel was made over carbon steel using two different electrolytic solutions: The Watts's bath and the nickel sulfamate bath, using a pulse variable current. The method use was the traditional method, its means a thermostatic cell and one movable anode, which is a few know technique nowadays, it allow realize depositions away from any laboratory or special workshop, it has the advantage to be a portable dispositive. At last of all the electro depositions the coatings quality was valuable by them physical properties like: adhesion, hardness, wrinkled and thickness. The best results was obtain by the Nickel sulfamate bath and movable anode, less in the thickness, which has higher on the thermostatic cell. The variable current was obtain by a Pulse Generator and a Cathodic galvanometer. (Author)

  8. Quantum theory of shuttling instability in a movable quantum dot array

    Science.gov (United States)

    Donarini, Andrea; Novotný, Tomás; Jauho, Antti-Pekka

    2004-04-01

    We study the shuttling instability in an array of three quantum dots the central one of which is movable. We extend the results by Armour and MacKinnon on this problem to a broader parameter regime. The results obtained by an efficient numerical method are interpreted directly using the Wigner distributions. We emphasize that the instability should be viewed as a crossover phenomenon rather than a clear-cut transition.

  9. Smoothed Particle Hydrodynamics Simulations of Dam-Break Flows Around Movable Structures

    OpenAIRE

    Jian, Wei; Liang, Dongfang; Shao, Songdong; Chen, Ridong; Yang, Kejun

    2015-01-01

    In this paper, 3D weakly compressible and incompressible Smoothed Particle Hydrodynamics (WCSPH & ISPH) models are used to study dam-break flows impacting on either a fixed or a movable structure. First, the two models’ performances are compared in terms of CPU time efficiency and numerical accuracy, as well as the water surface shapes and pressure fields. Then, they are applied to investigate dam-break flow interactions with structures placed in the path of the flood. The study found that th...

  10. Preoperative diagnosis and radiographic findings of a freely movable mucocele of the vermiform appendix

    Energy Technology Data Exchange (ETDEWEB)

    Shukunami, K.-I.; Kaneshima, M.; Kotsuji, F. [Fukui Medical Univ., Dept. of Obstetrics and Gynecology, Matsuoka-Cho, Yoshida-Gun, Fukui (Japan)

    2000-10-01

    Mucocele of the vermiform appendix is rarely diagnosed before surgery, although radiologic and ultrasonographic (US) findings have been reported. To our knowledge, there have been no previous reports of 2 different radiologic images of the cyst in the same patient during the preoperative period. We present 2 different shapes and locations of a freely movable mucocele of the appendix as it appeared before surgery. (author)

  11. The effect of different shades of specific luting agents and IPS empress ceramic thickness on overall color.

    Science.gov (United States)

    Terzioğlu, Hakan; Yilmaz, Burak; Yurdukoru, Bengul

    2009-10-01

    The color stability of both porcelain and luting materials is very important for the esthetics of laminate veneers and all-ceramic crowns. The purpose of this study was to determine the effect of different shades of resin-based luting cement and the thickness of IPS Empress ceramics on the final color of the restorations. Resin-based dual-polymerized composite cement in two different shades (RelyX ARC) and ceramic disks of different thicknesses were selected for the study. Forty specimens (ten each of four different thicknesses: 0.5 mm, 1 mm, 2 mm, and 3 mm) were used for the evaluation. Initial specimen color parameters were determined in a Commission Internationale de l'Eclairage L*a*b* color order system with a colorimeter. Two different shades of the cement were prepared as polymerized layers and applied to one face of the specimens in order. Color changes were calculated between baseline color measurements and measurements after cementation. Color difference data were analyzed statistically. All specimens showed a significant color shift (DE > 3.7) after cementation regardless of the cement shade. However, the differences in the cement shade did not significantly affect the final color of the ceramic specimens for any thickness, and color shifts were not perceivable between the different shades of cement. (Int J Periodontics Restorative Dent 2009;29:499-505.).

  12. New movable plate for efficient millimeter wave vertical on-chip antenna

    KAUST Repository

    Marnat, Loic; Carreno, Armando Arpys Arevalo; Conchouso Gonzalez, David; Galicia Martinez, Miguel Angel; Foulds, Ian G.; Shamim, Atif

    2013-01-01

    A new movable plate concept is presented in this paper to realize mm-wave vertical on-chip antennas through MEMS based post-processing steps in a CMOS compatible process. By virtue of its vertical position, the antenna is isolated from the lossy Si substrate and hence performs with a better efficiency as compared to the horizontal position. In addition, the movable plate concept enables polarization diversity by providing both horizontal and vertical polarizations on the same chip. Through a first iteration fractal bowtie antenna design, dual band (60 and 77 GHz) operation is demonstrated in both horizontal and vertical positions without any change in dimensions or use of switches for two different mediums (Si and air). To support the movable plate concept, the transmission line and antenna are designed on a flexible polyamide, where the former has been optimized to operate in the bent position. The design is highly suitable for compact, low cost and efficient SoC solutions. © 1963-2012 IEEE.

  13. New movable plate for efficient millimeter wave vertical on-chip antenna

    KAUST Repository

    Marnat, Loic

    2013-04-01

    A new movable plate concept is presented in this paper to realize mm-wave vertical on-chip antennas through MEMS based post-processing steps in a CMOS compatible process. By virtue of its vertical position, the antenna is isolated from the lossy Si substrate and hence performs with a better efficiency as compared to the horizontal position. In addition, the movable plate concept enables polarization diversity by providing both horizontal and vertical polarizations on the same chip. Through a first iteration fractal bowtie antenna design, dual band (60 and 77 GHz) operation is demonstrated in both horizontal and vertical positions without any change in dimensions or use of switches for two different mediums (Si and air). To support the movable plate concept, the transmission line and antenna are designed on a flexible polyamide, where the former has been optimized to operate in the bent position. The design is highly suitable for compact, low cost and efficient SoC solutions. © 1963-2012 IEEE.

  14. Movable shark scales act as a passive dynamic micro-roughness to control flow separation

    International Nuclear Information System (INIS)

    Lang, Amy W; Bradshaw, Michael T; Smith, Jonathon A; Wheelus, Jennifer N; Motta, Philip J; Habegger, Maria L; Hueter, Robert E

    2014-01-01

    Shark scales on fast-swimming sharks have been shown to be movable to angles in excess of 50°, and we hypothesize that this characteristic gives this shark skin a preferred flow direction. During the onset of separation, flow reversal is initiated close to the surface. However, the movable scales would be actuated by the reversed flow thereby causing a greater resistance to any further flow reversal and this mechanism would disrupt the process leading to eventual flow separation. Here we report for the first time experimental evidence of the separation control capability of real shark skin through water tunnel testing. Using skin samples from a shortfin mako Isurus oxyrinchus, we tested a pectoral fin and flank skin attached to a NACA 4412 hydrofoil and separation control was observed in the presence of movable shark scales under certain conditions in both cases. We hypothesize that the scales provide a passive, flow-actuated mechanism acting as a dynamic micro-roughness to control flow separation. (paper)

  15. Forage yield and nitrogen nutrition dynamics of warm-season native forage genotypes under two shading levels and in full sunlight

    Directory of Open Access Journals (Sweden)

    Raquel Santiago Barro

    2012-07-01

    Full Text Available The successful achievement of a highly productive understorey pasture in silvopastoral systems depends on the use of well-adapted forage genotypes, showing good agronomic performance and persistence under shading and grazing. In this study, the herbage dry matter yield (DMY and nitrogen nutrition dynamics were determined in three native warm-season grasses (Paspalum regnellii, Paspalum dilatatum and Paspalum notatum and a forage legume (Arachis pintoi under two shading levels compared with full sun. The experiment was conducted in the Campanha region, Bagé, state of Rio Grande do Sul, Brazil, during two evaluation cycles (2008/2009 and 2009/2010. Three shade cloth levels (0%, 50% and 80% of light restriction were applied to the forage genotypes in a split plot design, in which shading levels were the main plot and forage genotypes were the subplots, with three replications. P. regnellii showed the highest accumulated DMY (1500 and 1700 g m-2, respectively, for the first and second evaluation cycles at all shading levels and showed no DMY decreased under the heavy shade (80%. Average DMY over the four genotypes under the 50% shade level was higher or equal compared with full sun. Influence of rainfall was observed on the DMY performance of all genotypes: the positive effect of moderate shading (50% on P. dilatatum and P. notatum DMY was associated to a low soil water availability status. Increased shading level resulted in high nitrogen nutrition index values on grasses, in comparison with full sun. All genotypes performed well under the moderate shading level, but the DMY of both P. regnellii and P. dilatatum and the herbage N content in P. notatum and A. pintoi of all genotypes stood out, showing that those main genotypes are promising to grow in silvopastoral systems at the Campanha region in southern Brazil.

  16. Shade tree selection and management practices by farmers in ...

    African Journals Online (AJOL)

    There is a traditional practice of forest management in coffee producing communities in Ethiopian moist Afromontane forests to increase coffee production. The practice involves removal of big canopy trees with excessive shade and selectively retaining specific tree species as preferred shade trees. This study was initiated ...

  17. Buckminsterfullerene's movability on the Fe(001) surface

    Energy Technology Data Exchange (ETDEWEB)

    Kuzubov, Alexander A. [Siberian Federal University, 79 Svobodny pr., Krasnoyarsk 660041 (Russian Federation); L.V. Kirensky Institute of Physics, 50 Akademgorodok, Krasnoyarsk 660036 (Russian Federation); Kovaleva, Evgenia A., E-mail: kovaleva.evgeniya1991@mail.ru [Siberian Federal University, 79 Svobodny pr., Krasnoyarsk 660041 (Russian Federation); Avramov, Pavel V. [Kyungpook National University, 80 Daehakro, Bukgu, Daegu 41566 (Korea, Republic of); Kholtobina, Anastasia S.; Mikhaleva, Natalya S. [Siberian Federal University, 79 Svobodny pr., Krasnoyarsk 660041 (Russian Federation); Kuklin, Artem V. [Siberian Federal University, 79 Svobodny pr., Krasnoyarsk 660041 (Russian Federation); Kyungpook National University, 80 Daehakro, Bukgu, Daegu 41566 (Korea, Republic of)

    2016-07-15

    Organic-based spintronics is one of the most fast-developing fields in nanoelectronics. Buckminsterfullerene-based composites are widely investigated due to its unique properties and there is a number of studies concerned with its interfaces with various types of substrates. Ferromagnetic surfaces are of a particular interest for potential spintronics applications. Based on the data reported in literature, we suppose that there are more than one stable structure in C{sub 60}/Fe(001) composite system. Here we investigate different possible adsorption sites of C{sub 60} molecule and reveal the possibility of their coexistence and its influence on the composite properties. - Highlights: • Atomic and electronic structure of C{sub 60}/Fe(001) composites was studied by means of DFT. • Potential barriers of C{sub 60} displacement were estimated. • Influence of C{sub 60} relocation on composite properties was discussed.

  18. Slovakia: Proposal of movable reflector for fast reactor design

    International Nuclear Information System (INIS)

    Vrban, B.

    2015-01-01

    In fast reactors a larger migration area leading to a significant leak of neutrons can be observed because especially the transport cross-sections are in general smaller as compared to light water reactors. The utilization of a moveable reflector system in conjunction with dedicated safety control rods can increase the ability of accident managing due to enhanced escaping neutrons which otherwise would be reflected back into the fuel zone. The paper demonstrates the possibility of better controlling the transient reactor by additionally moving selected reflector subassemblies equipped with the neutron trap. The main purpose of the analysis of the Gas-cooled Fast Reactor (GFR) presented in the full paper is investigation of the kinetic parameters and of the control and reflector rod worth, as well as optimization of the parts used for partial reflector withdrawal. The results found in this study may serve for future design improvements of other designs such as the liquid metal cooled fast reactors

  19. Shaded Relief of Rio Sao Francisco, Brazil

    Science.gov (United States)

    2000-01-01

    This topographic image acquired by SRTM shows an area south of the Sao Francisco River in Brazil. The scrub forest terrain shows relief of about 400 meters (1300 feet). Areas such as these are difficult to map by traditional methods because of frequent cloud cover and local inaccessibility. This region has little topographic relief, but even subtle changes in topography have far-reaching effects on regional ecosystems. The image covers an area of 57 km x 79 km and represents one quarter of the 225 km SRTM swath. Colors range from dark blue at water level to white and brown at hill tops. The terrain features that are clearly visible in this image include tributaries of the Sao Francisco, the dark-blue branch-like features visible from top right to bottom left, and on the left edge of the image, and hills rising up from the valley floor. The San Francisco River is a major source of water for irrigation and hydroelectric power. Mapping such regions will allow scientists to better understand the relationships between flooding cycles, forestation and human influences on ecosystems.This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Shaded relief maps are commonly used in applications such as geologic mapping and land use planning.The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200

  20. Shaded relief of Bahia State, Brazil

    Science.gov (United States)

    2000-01-01

    This topographic image is the first to show the full 240-kilometer-wide (150 mile)swath collected by the Shuttle Radar Topography Mission (SRTM). The area shown is in the state of Bahia in Brazil. The semi-circular mountains along the left side of the image are the Serra Da Jacobin, which rise to 1100 meters (3600 feet) above sea level. The total relief shown is approximately 800 meters (2600 feet). The top part of the image is the Sertao, a semi-arid region, that is subject to severe droughts during El Nino events. A small portion of the San Francisco River, the longest river (1609 kilometers or 1000 miles) entirely within Brazil, cuts across the upper right corner of the image. This river is a major source of water for irrigation and hydroelectric power. Mapping such regions will allow scientists to better understand the relationships between flooding cycles, drought and human influences on ecosystems.This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Colors show the elevation as measured by SRTM. Colors range from green at the lowest elevations to reddish at the highest elevations. Shaded relief maps are commonly used in applications such as geologic mapping and land use planning.The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging

  1. Colored Height and Shaded Relief, Central America

    Science.gov (United States)

    2002-01-01

    Panama, Costa Rica, Nicaragua, El Salvador, Honduras, Guatemala, Belize, southern Mexico and parts of Cuba and Jamaica are all seen in this image from NASA's Shuttle Radar Topography Mission. The dominant feature of the northern part of Central America is the Sierra Madre Range, spreading east from Mexico between the narrow Pacific coastal plain and the limestone lowland of the Yucatan Peninsula. Parallel hill ranges sweep across Honduras and extend south, past the Caribbean Mosquito Coast to lakes Managua and Nicaragua. The Cordillera Central rises to the south, gradually descending to Lake Gatun and the Isthmus of Panama. A highly active volcanic belt runs along the Pacific seaboard from Mexico to Costa Rica.High-quality satellite imagery of Central America has, until now, been difficult to obtain due to persistent cloud cover in this region of the world. The ability of SRTM to penetrate clouds and make three-dimensional measurements has allowed the generation of the first complete high-resolution topographic map of the entire region. This map was used to generate the image.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to white at the highest elevations.For an annotated version of this image, please select Figure 1, below: [figure removed for brevity, see original site] (Large image: 9 mB jpeg)Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect

  2. World Globes, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    These images of the world were generated with data from the Shuttle Radar Topography Mission (SRTM). The SRTM Project has recently released a new global data set called SRTM30, where the original one arcsecond of latitude and longitude resolution (about 30 meters, or 98 feet, at the equator) was reduced to 30 arcseconds (about 928 meters, or 1496 feet.) These images were created from that data set and show the Earth as it would be viewed from a point in space centered over the Americas, Africa and the western Pacific.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise,Washington, D.C.Orientation: North toward the top Image Data: shaded and colored SRTM elevation model Original Data Resolution: SRTM 1 arcsecond (about 30 meters or 98 feet

  3. Ireland, Shaded Relief and Colored Height

    Science.gov (United States)

    2005-01-01

    The island of Ireland comprises a large central lowland of limestone with a relief of hills surrounded by a discontinuous border of coastal mountains which vary greatly in geological structure. The mountain ridges of the south are composed of old red sandstone separated by limestone river valleys. Granite predominates in the mountains of Galway, Mayo and Donegal in the west and north-west and in Counties Down and Wicklow on the east coast, while a basalt plateau covers much of the north-east of the country. The central plain, which is broken in places by low hills, is extensively covered with glacial deposits of clay and sand. It has considerable areas of bog and numerous lakes. The island has seen at least two general glaciations and everywhere ice-smoothed rock, mountain lakes, glacial valleys and deposits of glacial sand, gravel and clay mark the passage of the ice. Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Geospatial-Intelligence Agency

  4. Alpine Fault, New Zealand, SRTM Shaded Relief and Colored Height

    Science.gov (United States)

    2005-01-01

    The Alpine fault runs parallel to, and just inland of, much of the west coast of New Zealand's South Island. This view was created from the near-global digital elevation model produced by the Shuttle Radar Topography Mission (SRTM) and is almost 500 kilometers (just over 300 miles) wide. Northwest is toward the top. The fault is extremely distinct in the topographic pattern, nearly slicing this scene in half lengthwise. In a regional context, the Alpine fault is part of a system of faults that connects a west dipping subduction zone to the northeast with an east dipping subduction zone to the southwest, both of which occur along the juncture of the Indo-Australian and Pacific tectonic plates. Thus, the fault itself constitutes the major surface manifestation of the plate boundary here. Offsets of streams and ridges evident in the field, and in this view of SRTM data, indicate right-lateral fault motion. But convergence also occurs across the fault, and this causes the continued uplift of the Southern Alps, New Zealand's largest mountain range, along the southeast side of the fault. Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast (image top to bottom) direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data

  5. Reliability of conventional shade guides in teeth color determination.

    Science.gov (United States)

    Todorović, Ana; Todorović, Aleksandar; Gostović, Aleksandra Spadijer; Lazić, Vojkan; Milicić, Biljana; Djurisić, Slobodan

    2013-10-01

    Color matching in prosthodontic therapy is a very important task because it influences the esthetic value of dental restorations. Visual shade matching represents the most frequently applied method in clinical practice. Instrumental measurements provide objective and quantified data in color assessment of natural teeth and restorations. In instrumental shade analysis, the goal is to achieve the smallest deltaE value possible, indicating the most accurate shade match. The aim of this study was to evaluate the reliability of commercially available ceramic shade guides. VITA Easyshade spectrophotometer (VITA, Germany) was used for instrumental color determination. Utilizing this device, color samples of ten VITA Classical and ten VITA 3D - Master shade guides were analyzed. Each color sample from all shade guides was measured three times and the basic parameters of color quality were examined: deltaL, deltaC, deltaH, deltaE, deltaElc. Based on these parameters spectrophotometer marks the shade matching as good, fair or adjust. After performing 1,248 measurements of ceramic color samples, frequency of evaluations adjust, fair and good were statistically significantly different between VITA Classical and VITA 3D Master shade guides (p = 0.002). There were 27.1% cases scored as adjust, 66.3% as fair and 6.7% as good. In VITA 3D - Master shade guides 30.9% cases were evaluated as adjust, 66.4% as fair and 2.7% cases as good. Color samples from different shade guides, produced by the same manufacturer, show variability in basic color parameters, which once again proves the lack of precision and nonuniformity of the conventional method.

  6. Electrochemical decontamination of metallic surfaces by means of a movable electrode

    International Nuclear Information System (INIS)

    Mihai, F.; Nicu, M.; Cazan, L.; Turcanu, C.

    1998-01-01

    Electrochemical decontamination can be considered to be a decontamination assisted by an electrochemical field. The method is applied to the metallic surface decontamination for contaminants of any physico-chemical nature. The physico-chemical phenomenon that is the basis for the electrochemical methods is the anodic layer dissolution. By dissolution of the superficial layer any radioactive contaminant on the surface or entrapped within the surface oxide is eliminated. Electrochemical decontamination, also known as electropolishing, involves the use of the object to be cleaned as an anode in an electrochemical cell. The passage of current results in anodic dissolution of the surface material. Generally, there are many methods of application for electropolishing. The most common method is immersing the object to be decontaminated in a tank filled with a suitable electrolyte. The electrochemical method with movable electrode involves the use of 'in situ' mobile devices that are able to electropolish punctual surfaces in places difficult to access. The advantages are the simplicity of the setup, short times of application and reduced waste volumes. Phosphoric and sulphuric acid mixture is used as the electrolyte in electropolishing because of its stability, safety and applicability to a variety of alloy systems. The method was applied to decontaminate carbon steel, aluminium and copper. Used contaminants are mixtures of 60 Co and 134 Cs; 60 Co and 65 Zn; 60 Co, 65 Zn and 134 Cs. After preparation, the samples were kept in laboratory conditions about one month, to simulate real conditions and to let the chemical reactions between contaminant and sample material constitution to complete. To calculate decontamination factor characteristic for each studied decontamination method the following radiometric measurements are necessary: - activity measurement after radioisotope solution contamination representing initial activity Λ in ; - activity measurement after

  7. The Influence of Dental Shade Guides and Experience on the Accuracy of Shade Matching.

    Science.gov (United States)

    Nakhaei, Mohammadreza; Ghanbarzadeh, Jalil; Amirinejad, Sahar; Alavi, Samin; Rajatihaghi, Hamidreza

    2016-01-01

    There is limited and inconsistent information on some factors affecting visual shade selection. The aim of this study was to evaluate the influence of shade guide type and professional experience on shade-matching results. Thirty Dental students (DS), 30 General dentists (GDs) and 30 Dental specialists (S) participated in this study. The participants were asked to match six target tabs using two dental shade guides: Vitapan Classical (VC) and Vitapan 3D-Master (3D). An intraoral spectrophotometer was used for color measurement of target tabs and selected tabs. The color difference (ΔE) values between the target tab and selected tab were calculated. Data were analyzed using analysis of variance (ANOVA) and paired f-test (α = 0.05). Results of the first five best matches for each target tab were expressed as ΔE1 to ΔE5. Differences in the mean values of ΔE1 to ΔE5 between VC and 3D were compared using descriptive statistics. There were no significant differences among the three participating groups in ΔE values when the 3D was used (p = 0.389). However, significant differences were found with VC (p Contemp Dent Pract 2016;17(1):22-26. Source of support: This study was supported by a grant (No. 920903) from the Vice Chancellor for Research of Mashhad University of Medical Sciences. The results presented here are based on undergraduate thesis (No. 2686) submitted to Mashhad School of Dentistry and Dental Research Center. None.

  8. Making biodiversity-friendly cocoa pay: combining yield, certification, and REDD for shade management.

    Science.gov (United States)

    Waldron, A; Justicia, R; Smith, L E

    2015-03-01

    The twin United Nations' Millennium Development Goals of biodiversity preservation and poverty reduction both strongly depend on actions in the tropics. In particular, traditional agroforestry could be critical to both biological conservation and human livelihoods in human-altered rainforest areas. However, traditional agroforestry is rapidly disappearing, because the system itself is economically precarious, and because the forest trees that shade traditional crops are now perceived to be overly detrimental to agricultural yield. Here, we show a case where the commonly used agroforestry shade metric, canopy cover, would indeed suggest complete removal of shade trees to maximize yield, with strongly negative biodiversity and climate implications. However, a yield over 50% higher was achievable if approximately 100 shade trees per hectare were planted in a spatially organized fashion, a win-win for biodiversity and the smallholder. The higher yield option was detected by optimizing simultaneously for canopy cover, and a second shade metric, neighboring tree density, which was designed to better capture the yield value of ecological services flowing from forest trees. Nevertheless, even a 50% yield increase may prove insufficient to stop farmers converting away from traditional agroforestry. To further increase agroforestry rents, we apply our results to the design of a sustainable certification (eco-labelling) scheme for cocoa-based products in a biodiversity hotspot, and consider their implications for the use of the United Nations REDD (reducing emissions from deforestation and forest degradation) program in agroforestry systems. Combining yield boost, certification, and REDD has the potential to incentivize eco-friendly agroforestry and lift smallholders out of poverty, simultaneously.

  9. An in vitro study to evaluate the difference in shade between commercially available shade guides and glazed porcelain

    Directory of Open Access Journals (Sweden)

    P Manimaran

    2016-01-01

    Full Text Available Introduction: Smile is one of the most important interactive communication skills of a person. A smile is the key factor for an aesthetic appearance. Hence aesthetics is one of the motivating factor for the patients to seek dental care. Correction of unaesthetic appearance gives a positive effect to the self esteem of the patient. Aim: The aim of this study was to compare the difference in the shade between the commercially available shade guides namely Vita Classical And Ivoclar Chromascop and the fired porcelain samples fabricated using Vita Zahnfabrik VMK 95 and Ivoclar Classic Materials respectively. Objectives: The objective of this study was to obtain a matching brand of material that has a particular shade tab among the brands used. Conclusion: To conclude, Ivoclar material matched the chromascop shade guide better than the vita material matched the vita classic shade guide.

  10. An in vitro study to evaluate the difference in shade between commercially available shade guides and glazed porcelain.

    Science.gov (United States)

    Manimaran, P; Sadan, D Sai

    2016-10-01

    Smile is one of the most important interactive communication skills of a person. A smile is the key factor for an aesthetic appearance. Hence aesthetics is one of the motivating factor for the patients to seek dental care. Correction of unaesthetic appearance gives a positive effect to the self esteem of the patient. The aim of this study was to compare the difference in the shade between the commercially available shade guides namely Vita Classical And Ivoclar Chromascop and the fired porcelain samples fabricated using Vita Zahnfabrik VMK 95 and Ivoclar Classic Materials respectively. The objective of this study was to obtain a matching brand of material that has a particular shade tab among the brands used. To conclude, Ivoclar material matched the chromascop shade guide better than the vita material matched the vita classic shade guide.

  11. Mt. Elgon, Africa, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    The striking contrast of geologic structures in Africa is shown in this shaded relief image of Mt. Elgon on the left and a section of the Great Rift Valley on the right. Mt. Elgon is a solitary extinct volcano straddling the border between Uganda and Kenya, and at 4,321 meters (14,178 feet) tall is the eighth highest mountain in Africa. It is positioned on the Pre-Cambriam bedrock of the Trans Nzoia Plateau, and is similar to other such volcanoes in East Africa in that it is associated with the formation of the Rift Valley. However one thing that sets Mt. Elgon apart is its age. Although there is no verifiable evidence of its earliest volcanic activity, Mt. Elgon is estimated to be at least 24 million years old, making it the oldest extinct volcano in East Africa. This presents a striking comparison to Mt. Kilimanjaro, the highest mountain in Africa at 5,895 meters (19,341 feet), which is just over one million years old. Judging by the diameter of its base, it is a common belief among geological experts that Mt. Elgon was once the highest mountains in Africa, however erosion has played a significant role in reducing the height to its present value. Juxtaposed with this impressive mountain is a section of the Great Rift Valley, a geological fault system that extends for about 4,830 kilometers (2,995 miles) from Syria to central Mozambique. Erosion has concealed some sections, but in some sections like that shown here, there are sheer cliffs several thousand feet high. The present configuration of the valley, which dates from the mid-Pleistocene epoch, results from a rifting process associated with thermal currents in the Earth's mantle. Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height

  12. Light-scattering properties of a woven shade-screen material used for daylighting and solar heat-gain control

    Energy Technology Data Exchange (ETDEWEB)

    Jonsson, Jacob; Jonsson, Jacob C.; Lee, Eleanor S.; Rubin, Mike

    2008-08-01

    Shade-screens are widely used in commercial buildings as a way to limit the amount of direct sunlight that can disturb people in the building. The shade screens also reduce the solar heat-gain through glazing the system. Modern energy and daylighting analysis software such as EnergyPlus and Radiance require complete scattering properties of the scattering materials in the system. In this paper a shade screen used in the LBNL daylighting testbed is characterized using a photogoniometer and a normal angle of incidence integrating sphere. The data is used to create a complete bi-directional scattering distribution function (BSDF) that can be used in simulation programs. The resulting BSDF is compared to a model BADFs, both directly and by calculating the solar heat-gain coefficient for a dual pane system using Window 6.

  13. Shaded Coffee: A way to Increase Sustainability in Brazilian Organic Coffee plantations

    OpenAIRE

    Moreira, Cassio Franco; De Nadai Fernandes, Elisabete A.; Tagliaferro, Fábio Sileno

    2008-01-01

    Consumption of specialty coffee, mainly organic coffee, increases worldwide following the tendency of consuming social and ecological sustainable products. Brazil is the world largest coffee producer, with an average of 2,300,000 tons of green coffee in the last 5 years. Cultivation of organic coffee and shaded coffee are common in Central America, while in Brazil both conventional and organic coffee are cultivated in the full sun system. The full sun system is criticized due to the lack of b...

  14. Experimental study on the scram of electromagnetic movable coil control rod drive mechanism

    International Nuclear Information System (INIS)

    Sun Changlong; Bo Hanliang; Jiang Shengyao; Zhang Hongchao; Ma Cang; Wang Jinhua; Qin Benke

    2006-01-01

    Electromagnetic movable coil control rod drive mechanism is a new type drive mechanism. The drive mechanism is experimentally studied to gain the characteristic of scram time. Further more, the reason of the different scram phenomena is analyzed and the disciplinarian of scram is also summarized. On the base of series experiments it can be concluded that scram time of AC break is longer than that of DC break and the residual current of coil's can distinctly influence the scram time. The scram time of AC break is 300-700 ms longer than that of DC break. (authors)

  15. Development of a movable table for a bending magnet with removable guides

    International Nuclear Information System (INIS)

    Shibuya, T.; Ito, I.; Kudoh, H.

    2004-01-01

    We develop the movable table for a bending magnet with removable guides. This table has two parallel rails in order to move the bending magnet smoothly and set it precisely. Especially this table has two removable expanded rail guides. Removing this expanded rail guides allow us to make more enough spaces, for example, to install another insertion devices. We measure the reliability of setting this table by moving this table along the rails. And we found this reliability is less than ±3 μm. We also measure the long-term stability of this table setting. (author)

  16. Guiana Highlands, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    Doyle's 1912 best-seller 'The Lost World.'Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise,Washington, D.C.Location: 0.2 South to 8.7 degrees North latitude, 60 to 67.9 degrees West longitude Orientation: North toward the top Image Data: shaded and colored SRTM30 and GTOPO30 elevation models Data Resolution: SRTM 30 arcsecond (about 928 meters or 1496 feet) Date Acquired: February 2000 for SRTM

  17. France, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    This image of France was generated with data from the Shuttle Radar Topography Mission (SRTM). For this broad view the resolution of the data was reduced to 6 arcseconds (about 185 meters north-south and 127 meters east-west), resampled to a Mercator projection, and the French border outlined. Even at this decreased resolution the variety of landforms comprising the country is readily apparent.The upper central part of this scene is dominated by the Paris Basin, which consists of a layered sequence of sedimentary rocks. Fertile soils over much of the area make good agricultural land. The Normandie coast to the upper left is characterized by high, chalk cliffs, while the Brittany coast (the peninsula to the left) is highly indented where deep valleys were drowned by the sea, and the Biscay coast to the southwest is marked by flat, sandy beaches.To the south, the Pyrenees form a natural border between France and Spain, and the south-central part of the country is dominated by the ancient Massif Central. Subject to volcanism that has only subsided in the last 10,000 years, these central mountains are separated from the Alps by the north-south trending Rhone River Basin.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D

  18. A simple method to achieve full-field and real-scale reconstruction using a movable stereo rig

    Science.gov (United States)

    Gu, Feifei; Zhao, Hong; Song, Zhan; Tang, Suming

    2018-06-01

    This paper introduces a simple method to achieve full-field and real-scale reconstruction using a movable binocular vision system (MBVS). The MBVS is composed of two cameras, one is called the tracking camera, and the other is called the working camera. The tracking camera is used for tracking the positions of the MBVS and the working camera is used for the 3D reconstruction task. The MBVS has several advantages compared with a single moving camera or multi-camera networks. Firstly, the MBVS could recover the real-scale-depth-information from the captured image sequences without using auxiliary objects whose geometry or motion should be precisely known. Secondly, the removability of the system could guarantee appropriate baselines to supply more robust point correspondences. Additionally, using one camera could avoid the drawback which exists in multi-camera networks, that the variability of a cameras’ parameters and performance could significantly affect the accuracy and robustness of the feature extraction and stereo matching methods. The proposed framework consists of local reconstruction and initial pose estimation of the MBVS based on transferable features, followed by overall optimization and accurate integration of multi-view 3D reconstruction data. The whole process requires no information other than the input images. The framework has been verified with real data, and very good results have been obtained.

  19. Properly placed shade trees reduce summertime electricity bills in Sacramento, California

    Science.gov (United States)

    Geoffery H. Donovan; David R. Butry

    2009-01-01

    The discovery that shade trees can reduce home cooling costs is hardly surprising. Anybody who has sat under a tree on a warm summer day understands the shade benefit of trees. However, quantifying the effect a shade tree has on home energy use and carbon footprint, and identifying the optimal location for a shade tree, is less straightforward. Past studies that have...

  20. Influences of shading and fertilization on on-farm yields of cocoa in Ghana

    DEFF Research Database (Denmark)

    Richard, Asare; Asare, Rebecca Ashley; Asante, Winston Adams

    2017-01-01

    Most cocoa farms in Ghana are cultivated in complex agroforest systems, with plant growth and cocoa productivity being affected. The objective of this study was to investigate how shade trees affect cocoa yield, temperature and soil nutrients in low-input cocoa systems. Establishing plots on 24...... farms in four locations (districts) in Ghana, we assessed the influence of varying canopy cover and fertilization on cocoa yields. Results showed no relationship between canopy cover and cocoa yields in the light crop season (February to August). For the main crop season (September to January...... recorded in the cocoa canopies were above the recommended range for this species. Although shade trees had a slight modifying effect on peak temperatures, the magnitude appeared too small to have any practical effects....

  1. Shade response of a full size TESSERA module

    Science.gov (United States)

    Slooff, Lenneke H.; Carr, Anna J.; de Groot, Koen; Jansen, Mark J.; Okel, Lars; Jonkman, Rudi; Bakker, Jan; de Gier, Bart; Harthoorn, Adriaan

    2017-08-01

    A full size TESSERA shade tolerant module has been made and was tested under various shadow conditions. The results show that the dedicated electrical interconnection of cells result in an almost linear response under shading. Furthermore, the voltage at maximum power point is almost independent of the shadow. This decreases the demand on the voltage range of the inverter. The increased shadow linearity results in a calculated increase in annual yield of about 4% for a typical Dutch house.

  2. Analysis of the internal shading in a photovoltaic greenhouse tunnel

    Directory of Open Access Journals (Sweden)

    Alvaro Marucci

    2017-09-01

    Full Text Available In recent years, the increasing interest in energy production from renewable energy sources has led to photovoltaic elements being placed on greenhouse coverings. The shading of crops by these elements can, however, cause problems regarding the normal course of agricultural activity. All studies thus far on the application of photovoltaic (PV panels as a greenhouse covering material have focused on flat roof structures. Tunnel greenhouses, due to their curved shape, do not lend themselves easily to accommodating PV panels on even part of the cover. In this study, we analysed the shading variation inside a tunnel greenhouse that was produced by applying flexible and transparent PV panels in a checkerboard arrangement. The transparent flexible PV panels are manufactured using monocrystalline silicon cells, with an efficiency of 18%, incorporated into polymers with high resistance. The PV panel dimensions are 1.116×0.165 m. The simulation software Autodesk® Autocad2010® was used for this study. The variation and distribution of the shading percentage of PV panels were analysed in relation to the surface area affected by the photovoltaic roof, the total area of the greenhouse and the section of the greenhouse. In particular, we studied the variations in the percentage of shading and the size of the shaded area on the twenty-first day of each month of the year. The results show some regularity in the shading percentage, mainly due to the curvilinear shape of the section of the greenhouse. From mid-March to mid- September, the shading in the middle of the day is almost always inside the greenhouse. In the other months of the year, it is partly inside and partly outside the tunnel greenhouse. With the photovoltaic arrangement adopted, the percentage of shading during the year never exceeds 40%.

  3. Effects of the partially movable control fin with end plate of underwater vehicle

    Directory of Open Access Journals (Sweden)

    Chul-Min Jung

    2017-01-01

    Full Text Available Underwater torpedo has control fin with very low aspect ratio due to launching from limited size of cylindrical torpedo tube. If the aspect ratio of control fin of underwater vehicle is very low three-dimensional flow around control fin largely reduces control forces. In this study, the end plate was applied to reduce the three-dimensional flow effects of partially movable control fin of underwater vehicle. Through numerical simulations the flow field around control fin was examined with and without end plate for different flap angles. The pressure, vorticity, lift and torque on the control fin were analyzed and compared to experiments. The comparison have shown a reasonable agreement between numerical and experimental results and the effect of end plate on a low aspect ratio control fin. When the end plate was attached to the movable control fin, the lift increased and the actuator shaft torque did not significantly change. As this means less consumption of the actuator shaft torque compared to the control fin that has the same control force, the inner actuator capacity can be reduced and energy consumption can be saved. Considering this, it is expected to be effectively applied to the control fin design of underwater vehicles such as torpedoes.

  4. Theoretical and experimental analysis of a linear accelerator endowed with single feed coupler with movable short-circuit

    International Nuclear Information System (INIS)

    Forno, Massimo Dal; Craievich, Paolo; Penco, Giuseppe; Vescovo, Roberto

    2013-01-01

    The front-end injection systems of the FERMI@Elettra linac produce high brightness electron beams that define the performance of the Free Electron Laser. The photoinjector mainly consists of the radiofrequency (rf) gun and of two S-band rf structures which accelerate the beam. Accelerating structures endowed with a single feed coupler cause deflection and degradation of the electron beam properties, due to the asymmetry of the electromagnetic field. In this paper, a new type of single feed structure with movable short-circuit is proposed. It has the advantage of having only one waveguide input, but we propose a novel design where the dipolar component is reduced. Moreover, the racetrack geometry allows to reduce the quadrupolar component. This paper presents the microwave design and the analysis of the particle motion inside the linac. A prototype has been machined at the Elettra facility to verify the new coupler design and the rf field has been measured by adopting the bead-pull method. The results are here presented, showing good agreement with the expectations

  5. Theoretical and experimental analysis of a linear accelerator endowed with single feed coupler with movable short-circuit.

    Science.gov (United States)

    Dal Forno, Massimo; Craievich, Paolo; Penco, Giuseppe; Vescovo, Roberto

    2013-11-01

    The front-end injection systems of the FERMI@Elettra linac produce high brightness electron beams that define the performance of the Free Electron Laser. The photoinjector mainly consists of the radiofrequency (rf) gun and of two S-band rf structures which accelerate the beam. Accelerating structures endowed with a single feed coupler cause deflection and degradation of the electron beam properties, due to the asymmetry of the electromagnetic field. In this paper, a new type of single feed structure with movable short-circuit is proposed. It has the advantage of having only one waveguide input, but we propose a novel design where the dipolar component is reduced. Moreover, the racetrack geometry allows to reduce the quadrupolar component. This paper presents the microwave design and the analysis of the particle motion inside the linac. A prototype has been machined at the Elettra facility to verify the new coupler design and the rf field has been measured by adopting the bead-pull method. The results are here presented, showing good agreement with the expectations.

  6. New Zealand, SRTM Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    New Zealand straddles the juncture of the Indo-Australian and Pacific tectonic plates, two of Earth's major crustal plates. The two plates generally converge in subduction zones, but in a scissor-like pattern, with the Indo-Austalian plate overriding the Pacific plate to the north and the Pacific plate overriding the Indo-Australian plate to the south. New Zealand is 'what happens' in between at and near the cross point of this scissor pattern. Here the convergence has built two major islands that together exhibit very active volcanoes and fault systems, and these geologic features are very evident in the topographic pattern. The North Island lies at the southern end of the west-over-east (Indo-Australian over Pacific) plate convergence. The Pacific plate dives under the North Island and this subduction process leads to melting of rocks at depth, the rise of magma to the surface, and the formation of volcanoes and other geothermal features. Most notable are Mount Taranaki on the west coast, and Mounts Ruapehu, Ngauruhoe, and Tongariro just south of the island's centerpoint, all of which are shown with white peaks in this display. The Rotorua geothermal field occurs further northeast and is evident here as a scattering of comparatively small bumps created by smaller volcanic eruptions. The South Island straddles the cross point of the subduction scissor pattern and prominently features a fault system that connects the two subduction zones. (The east-over-west (Pacific over Indo-Australian) plate convergence generally occurs south of the South Island.) The Alpine fault is the major strand of this fault system along most of the length of the island, near and generally paralleling the west coast. Its impact upon the topography is unmistakable, forming an extremely sharp and straight northwest boundary to New Zealand's tallest mountains, the Southern Alps. Although offsets on the Alpine fault are generally right-lateral (35-40 millimeters per year) and thus consistent

  7. Evaluation of Tomato Yield and Quality under Deficit Irrigation conditions and Simultaneous Application of Superabsorbent Polymer, Shading and Mulches

    Directory of Open Access Journals (Sweden)

    Maryam Bostani

    2017-12-01

    Full Text Available Introduction Drought is one of the most important environmental factors that influences yield and quality of tomato (Solanum lycopersicum Peralta & Spoonerin arid and semi-arid regions. Drought stress causes different physiological effects on plant growth. Vegetable crops are more sensitive to water shortage and any deficit in providing water requirement of plant leads to considerable reduction of yield. For future global food security, water use in agriculture must become sustainable. Agricultural water-use efficiency and water productivity can be improved by many approaches and strategies. Super absorbent polymers (SAP as a soil improvement substance, covering soil by different types of mulches and blocking a part of sun light by shading have been used effectively to increase the water use efficiency sustainability of production in agricultural systems. But, still there is a limited knowledge on interactions of SAPs, plastic mulches and shading under deficit irrigation on yield and quality of tomato. Material and Methods In order to evaluate the effects of SAP, black plastic mulches and decreasing light intensity under deficit irrigation on yield and quality of tomato ‘Early Urbana VF 132- 7171’ fruits, the current research carried out in a field experiment at department of Horticulture, Ilam University during 2014 using a 3 × 8 × 3 split plot assay based on a randomized complete block design (RCBD with two factor. The main factor was including three irrigation intervals (once after 3, 6 or 9 days equivalent to soils field capacity and sub-factor was including eight treatments viz., mulch, superabsorbent, shading, mulch + superabsorbent, mulch + shading, superabsorbent¬ + shading, mulch + shading + superabsorbent and control. Light intensity was measured by a digital exposure meter ‘Mastech MS6610’. Data were subjected to ANOVA using SAS software version 9.3. Verification of significant differences was done using Duncan's Test at 5

  8. A Technique Using Calibrated Photography and Photoshop for Accurate Shade Analysis and Communication.

    Science.gov (United States)

    McLaren, Edward A; Figueira, Johan; Goldstein, Ronald E

    2017-02-01

    This article reviews the critical aspects of controlling the shade-taking environment and discusses various modalities introduced throughout the years to acquire and communicate shade information. Demonstrating a highly calibrated digital photographic technique for capturing shade information, this article shows how to use Photoshop® to standardize images and extract color information from the tooth and shade tab for use by a ceramist for an accurate shade-matching restoration.

  9. Forage yield and nitrogen nutrition dynamics of warm-season native forage genotypes under two shading levels and in full sunlight

    OpenAIRE

    Barro,Raquel Santiago; Varella,Alexandre Costa; Lemaire,Gilles; Medeiros,Renato Borges de; Saibro,João Carlos de; Nabinger,Carlos; Bangel,Felipe Villamil; Carassai,Igor Justin

    2012-01-01

    The successful achievement of a highly productive understorey pasture in silvopastoral systems depends on the use of well-adapted forage genotypes, showing good agronomic performance and persistence under shading and grazing. In this study, the herbage dry matter yield (DMY) and nitrogen nutrition dynamics were determined in three native warm-season grasses (Paspalum regnellii, Paspalum dilatatum and Paspalum notatum) and a forage legume (Arachis pintoi) under two shading levels compared with...

  10. Ecosystem Service of Shade Trees on Nutrient Cycling and Productivity of Coffee Agro-ecosystems

    Directory of Open Access Journals (Sweden)

    Rusdi Evizal

    2009-05-01

    Full Text Available Shade trees are significant in certification scheme of sustainable coffee production. They play an importance role on ecosystem functioning. This research is aimed to study ecosystem service of shade trees in some coffee agro-ecosystems particularly on nutrient cycling and land productivity. Four agro-ecosys tems of Robusta coffee (Coffea canephora, namely sun coffee (without shade trees, coffee shaded by Michelia champaca, coffee shaded by Gliricidia sepium, and coffee shaded by Erythrina indica are evaluated during 2007—2008. Smallholder coffee plantation in Sumberjaya Subdistrict, West Lampung, which managed under local standard were employed using Randomized Complete Block Design with 3 replications. The result showed that litter fall dynamic from shade trees and from coffee trees was influenced by rainfall. Shade trees decreased weed biomass while increased litter fall production. In dry season, shade trees decreased litter fall from coffee shaded by M. champaca. G. sepium and E. indica shaded coffee showed higher yield than sun coffee and M. champaca shaded coffee. Except for M. champaca shaded coffee, yield had positive correlation (r = 0.99 with litter fall production and had negative correlation (r = —0.82 with weed biomass production. Biomass production (litter fall + weed of sun coffee and shaded coffee was not significantly different. Litter fall of shade trees had significance on nutrient cycle mainly to balance the lost of nitrogen in coffee bean harvesting.Key Words: Coffea canephora, Michelia champaca, Gliricidia sepium, Erythrina indica, litter production, nutrient cycle, coffee yield.

  11. Shaded relief, color as height, Fiji

    Science.gov (United States)

    2000-01-01

    The Sovereign Democratic Republic of the Fiji Islands, commonly known as Fiji, is an independent nation consisting of some 332 islands surrounding the Koro Sea in the South Pacific Ocean. This topographic image shows Viti Levu, the largest island in the group. With an area of 10,429 square kilometers (about 4000 square miles), it comprises more than half the area of the Fiji Islands. Suva, the capital city, lies on the southeast shore. The Nakauvadra, the rugged mountain range running from north to south, has several peaks rising above 900 meters (about 3000 feet). Mount Tomanivi, in the upper center, is the highest peak at 1324 meters (4341 feet). The distinct circular feature on the north shore is the Tavua Caldera, the remnant of a large shield volcano that was active about 4 million years ago. Gold has been mined on the margin of the caldera since the 1930's. The Nadrau plateau is the low relief highland in the center of the mountain range. The coastal plains in the west, northwest and southeast account for only 15 percent of Viti Levu's area but are the main centers of agriculture and settlement.This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Colors show the elevation as measured by SRTM. Colors range from green at the lowest elevations top ink at the highest elevations. This image contains about 1300 meters(4300 feet) of total relief.The Shuttle Radar Topography Mission (SRTM), launched on February 11,2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect

  12. Las notas al pie en la traducción de Fifty Shades (Footnotes in the Translation of Fifty Shades

    Directory of Open Access Journals (Sweden)

    Xinia Valverde Jara

    2017-11-01

    Full Text Available Se analiza el recurso de las notas a pie de página insertas en la traducción independiente de literatura comercial en versión digital, de la trilogía Fifty Shades of Grey, Fifty Shades Darker y Fifty Shades Freed, de E. L. James. Se examina el grado de influencia de esos elementos extratextuales, y se concluye que todos ellos, organizados en un complejo proceso de traducción, en especial los del contexto de llegada, condicionan la estrategia traductológica. Abstract This study examines the use of footnotes as a translation strategy in the independent translation of commercial literature in digital format, based on the trilogy written by E. L. James, Fifty Shades of Grey, Fifty Shades Darker and Fifty Shades Freed. The analysis measures the influence of these extratextual elements within the complex translation process, specifically those of the target language context, and it is concluded that they condition the translation strategies used.

  13. South America, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    occurrence of simple erosional processes acting upon fairly uniform bedrock. Very smooth plateaus here are remnants of landforms most likely developed under geologic and environmental conditions much different than those present today. Fractures paralleling the coast are likely related to the opening of the Atlantic Ocean as South America drifted away from Africa, starting about 130 million years ago.To the southwest, broad lowlands host the Gran Chaco and Pampas regions. The depositional Gran Chaco drainages run almost exclusively from west to east from the Andes Mountains to the western edge of the Brazilian Highlands as a result of the much greater sediment supply from the Andes. Geologic processes on the Pampas are much more diverse, with stream erosion, stream deposition, subsidence, and wind processes all evident, even at the one-kilometer resolution shown here.Further south, Patagonia also displays these geologic processes plus more prominent volcanic features, including bumpy mesas, which are lava plateaus with small (and some large) volcanic cones. At its southern tip South America breaks into islands that include Tierra del Fuego and the Straits of Magellan.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of

  14. Shades of grey; Assessing the contribution of the magno- and parvocellular systems to neural processing of the retinal input in the human visual system from the influence of neural population size and its discharge activity on the VEP.

    Science.gov (United States)

    Marcar, Valentine L; Baselgia, Silvana; Lüthi-Eisenegger, Barbara; Jäncke, Lutz

    2018-03-01

    Retinal input processing in the human visual system involves a phasic and tonic neural response. We investigated the role of the magno- and parvocellular systems by comparing the influence of the active neural population size and its discharge activity on the amplitude and latency of four VEP components. We recorded the scalp electric potential of 20 human volunteers viewing a series of dartboard images presented as a pattern reversing and pattern on-/offset stimulus. These patterns were designed to vary both neural population size coding the temporal- and spatial luminance contrast property and the discharge activity of the population involved in a systematic manner. When the VEP amplitude reflected the size of the neural population coding the temporal luminance contrast property of the image, the influence of luminance contrast followed the contrast response function of the parvocellular system. When the VEP amplitude reflected the size of the neural population responding to the spatial luminance contrast property the image, the influence of luminance contrast followed the contrast response function of the magnocellular system. The latencies of the VEP components examined exhibited the same behavior across our stimulus series. This investigation demonstrates the complex interplay of the magno- and parvocellular systems on the neural response as captured by the VEP. It also demonstrates a linear relationship between stimulus property, neural response, and the VEP and reveals the importance of feedback projections in modulating the ongoing neural response. In doing so, it corroborates the conclusions of our previous study.

  15. Flectofold—a biomimetic compliant shading device for complex free form facades

    Science.gov (United States)

    Körner, A.; Born, L.; Mader, A.; Sachse, R.; Saffarian, S.; Westermeier, A. S.; Poppinga, S.; Bischoff, M.; Gresser, G. T.; Milwich, M.; Speck, T.; Knippers, J.

    2018-01-01

    Smart and adaptive outer façade shading systems are of high interest in modern architecture. For long lasting and reliable systems, the abandonment of hinges which often fail due to mechanical wear during repetitive use is of particular importance. Drawing inspiration from the hinge-less motion of the underwater snap-trap of the carnivorous waterwheel plant (Aldrovanda vesiculosa), the compliant façade shading device Flectofold was developed. Based on computational simulations of the biological role-model’s elastic and reversible motion, the actuation principle of the plant can be identified. The enclosed geometric motion principle is abstracted into a simplified curved-line folding geometry with distinct flexible hinge-zones. The kinematic behaviour is translated into a quantitative kinetic model, using finite element simulation which allows the detailed analyses of the influence of geometric parameters such as curved-fold line radius and various pneumatically driven actuation principles on the motion behaviour, stress concentrations within the hinge-zones, and actuation forces. The information regarding geometric relations and material gradients gained from those computational models are then used to develop novel material combinations for glass fibre reinforced plastics which enabled the fabrication of physical prototypes of the compliant façade shading device Flectofold.

  16. Effects of shading on morphology, physiology and grain yield of winter wheat

    DEFF Research Database (Denmark)

    Li, Huawei; Jiang, Dong; Wollenweber, Bernd

    2010-01-01

    In a field experiment, winter wheat (Triticum aestivum L.) cultivars Yangmai 158 (YM 158, shading tolerant) and Yangmai 11 (YM 11, shading-sensitive) were subjected to shading between jointing and maturity. Three shading treatments were applied, i.e. 92% (S1), 85% (S2) and 77% (S3) of full...... the shading treatments applied, leaf area index, length of the peduncle internode, area of the upper leaves and content of pigments increased, which favoured efficient light capture. Shading modified light quality in the canopy as indicated by increases of diffuse- and blue light fractions and a reduction...... the flag leaf, as in most cases Pn of the third and the penultimate leaves were found to increase under shading treatments. Shading increased the redistribution of dry matter from vegetative organs into grains. The responses of the morphological and physiological traits to shading are discussed in relation...

  17. High magnetic field uniformity superconducting magnet for a movable polarized target

    International Nuclear Information System (INIS)

    Anishchenko, N.G.; Bartenev, V.D.; Blinov, N.A.

    1998-01-01

    The superconducting polarizing magnet was constructed for movable polarized target (MPT) with working volume 200 mm long and 30 mm in diameter. The magnet provides a polarizing magnetic field up to 6 T with the uniformity of 4.5 x 10 -4 in the working volume of the target. The magnet windings are made of a NbTi wire, impregnated with the epoxy resin and placed in the horizontal cryostat with 'warm' aperture diameter of 96 mm. The design and technology of the magnet winding are described. Results of the magnetic field map measurements using a NMR-magnetometer are given. The MPT set-up is installed in the beam line of polarized neutrons produced by break-up of polarized deuterons extracted from the Synchrophasotron of the Laboratory of High Energies (LHE), JINR, Dubna

  18. Quantum limits of photothermal and radiation pressure cooling of a movable mirror

    International Nuclear Information System (INIS)

    Pinard, M; Dantan, A

    2008-01-01

    We present a general quantum-mechanical theory for the cooling of a movable mirror in an optical cavity when both radiation pressure self-cooling and photothermal cooling effects are present, and show that these two mechanisms may bring the oscillator close to its quantum ground state, although in quite different regimes. Self-cooling caused by coherent exchange of excitations between the cavity mode and the mirror vibrational mode is shown to dominate in the good-cavity regime-when the mechanical resonance frequency is larger than the cavity decay rate, whereas photothermal-induced cooling can be made predominant in the bad-cavity limit. Both situations are compared, and the relevant physical quantities to be optimized in order to reach the lowest final excitation number states are extracted.

  19. 3D simulation of friction stir welding based on movable cellular automaton method

    Science.gov (United States)

    Eremina, Galina M.

    2017-12-01

    The paper is devoted to a 3D computer simulation of the peculiarities of material flow taking place in friction stir welding (FSW). The simulation was performed by the movable cellular automaton (MCA) method, which is a representative of particle methods in mechanics. Commonly, the flow of material in FSW is simulated based on computational fluid mechanics, assuming the material as continuum and ignoring its structure. The MCA method considers a material as an ensemble of bonded particles. The rupture of interparticle bonds and the formation of new bonds enable simulations of crack nucleation and healing as well as mas mixing and microwelding. The simulation results showed that using pins of simple shape (cylinder, cone, and pyramid) without a shoulder results in small displacements of plasticized material in workpiece thickness directions. Nevertheless, the optimal ratio of longitudinal velocity to rotational speed makes it possible to transport the welded material around the pin several times and to produce a joint of good quality.

  20. APPROACHES FOR STABILIZING OF BIPED ROBOTS IN A STANDING POSITION ON MOVABLE SUPPORT

    Directory of Open Access Journals (Sweden)

    D. N. Bazylev

    2015-05-01

    Full Text Available Subject of research. The problem of stabilization for biped walking robots on the surface is considered. The angle and angular velocity of the movable surface varies randomly in a limited range. Methods. Two approaches of stabilization of biped robots are proposed. The first approach requires the construction of kinematic and dynamic models of the robot. Dynamic equations were obtained using the Euler-Lagrange method. The control algorithm is based on the method of inverse dynamics, in which the original nonlinear dynamic model is linearized by a feedback. The second stabilization algorithm uses only the kinematic model of the robot. A hybrid controller is developed for this approach. In the case of low angular velocities of the movable support the robot stabilization is performed by PD controller on the basis of the angle error of deflection of the servo shaft. In the case of relatively high angular velocities of the support the controller also uses the gyroscope readings mounted in the robot torso. Maintenance of the robot’s gravity center over the center of bearing area for providing a stable position was chosen as a goal of control in both approaches. Main results. Efficiency and effectiveness of the proposed approaches for stabilization of biped robots on the moving surface are demonstrated by the numerical simulation. Both methods provide stability of the balancing robots on changing the angle of inclination and angular velocity of the moving surface in the ranges (50; 50 and (40 / sec; 40 / sec , respectively. Comparative analysis of these approaches under identical requirements for quality indicators of transients is also provided: transient time 0.2 sec п t  and overshoot   0%. The conditions under which each of the control methods will be more effective in practice are identified.

  1. Effects of shading on the photosynthetic characteristics and mesophyll cell ultrastructure of summer maize.

    Science.gov (United States)

    Ren, Baizhao; Cui, Haiyan; Camberato, James J; Dong, Shuting; Liu, Peng; Zhao, Bin; Zhang, Jiwang

    2016-08-01

    A field experiment was conducted to study the effects of shading on the photosynthetic characteristics and mesophyll cell ultrastructure of two summer maize hybrids Denghai605 (DH605) and Zhengdan958 (ZD958). The ambient sunlight treatment was used as control (CK) and shading treatments (40 % of ambient sunlight) were applied at different growth stages from silking (R1) to physiological maturity (R6) (S1), from the sixth leaf stage (V6) to R1 (S2), and from seeding to R6 (S3), respectively. The net photosynthetic rate (P n) was significantly decreased after shading. The greatest reduction of P n was found at S3 treatment, followed by S1 and S2 treatments. P n of S3 was decreased by 59 and 48 % for DH605, and 39 and 43 % for ZD958 at tasseling and milk-ripe stages, respectively, compared to that of CK. Additionally, leaf area index (LAI) and chlorophyll content decreased after shading. In terms of mesophyll cell ultrastructure, chloroplast configuration of mesophyll cells dispersed, and part of chloroplast swelled and became circular. Meanwhile, the major characteristics of chloroplasts showed poorly developed thylakoid structure at the early growth stage, blurry lamellar structure, loose grana, and a large gap between slices and warping granum. Then, plasmolysis occurred in mesophyll cells and the endomembrane system was destroyed, which resulted in the dissolution of cell membrane, karyotheca, mitochondria, and some membrane structures. The damaged mesophyll cell ultrastructure led to the decrease of photosynthetic capacity, and thus resulted in significant yield reduction by 45, 11, and 84 % in S1, S2, and S3 treatments, respectively, compared to that of CK.

  2. Shaded seafloor relief, backscatter strength, and surficial geology; German Bank, Scotian Shelf, offshore Nova Scotia

    Science.gov (United States)

    Todd, B.J.; Valentine, Page C.

    2010-01-01

    This map is part of a three-map series of German Bank, located on the Scotian Shelf off southern Nova Scotia.  This map is the product of a number of surveys (1997-2003) that used a multibeam sonar system to map 5321 km2 of the seafloor.  Other surveys collected geological data for scientific interpretation.  This map sheet shows the seafloor topography of German Bank in shaded-relief view and seafloor depth (coded by colour) at a scale of 1:1000,000.  Topographic contours generated from the multibeam data are shown (in white) on the colour-coded multibeam topography at a depth interval of 20 m.  Bathymetic contours (in blue) outside the multibeam survey area, presented at a depth interval of 10 m, are from the Natural Resource Map series (Canadian Hydrographic Service, 1967, 1971a, 1971b, 1972). Sheet 2 shows coloured backscatter strength in shaded-relief view.  Sheet 3 shows seafloor topography in shaded-relief view with colour-coded surficial geological units.

  3. Heterotrophic respiration in drained tropical peat temperatures influenced by shading gradient

    Science.gov (United States)

    Jauhiainen, Jyrki; Kerojoki, Otto; Silvennoinen, Hanna; Limin, Suwido; Vasander, Harri

    2015-04-01

    Lowland peatlands in Southeast Asia constitute a highly concentrated carbon (C) pool of global significance. These peatlands have formed over periods of several millennia by forest vegetation tolerant to flooding and poor substrates. Uncontrollable drainage and reoccurring wild fires in lack of management after removal of forest cover has impaired the C-storing functions in large reclaimed areas. Intergovernmental Panel on Climate Change (IPCC) reporting sees drained tropical organic soils as one of the largest greenhouse gas emissions releasing terrestrial systems. Vast areas of deforested tropical peatlands do not receive noteworthy shading by vegetation, which increases the amount of solar radiation reaching the peat surface. We studied heterotrophic carbon dioxide (CO2), nitrous oxide (N2O) and methane (CH4) fluxes in tropical peat in conditions, where; (i) peat temperatures were modified by artificial shading (no shade, 28%, 51% and 90% from the full sun exposure), (ii) root respiration was minimized, (iii) nutrient availability for peat decomposer community was changed (NPK fertilization of 0 and 313 kg ha-1). The experiment was repeated at two over 20 years ago drained fallow agricultural- and degraded sites in Central Kalimantan, Indonesia. Enhanced shading created a lasting decrease in peat temperatures, and decreased diurnal temperature fluctuations, in comparison to less shaded plots. The largest peat temperature difference was between the unshaded and 90% shaded peat surface, where the average temperatures within the topmost 50-cm peat profile differed 3 °C, and diurnal temperatures at 5 cm depth varied up to 4.2 °C in the unshaded and 0.4 °C in the 90% shaded conditions. Highest impacts on the heterotrophic CO2 fluxes caused by the treatments were on agricultural land, where 90% shading from the full exposure resulted in a 33% lower CO2 emission average on the unfertilised plots and a 66% lower emission average on the fertilised plots. Correlation

  4. Re-Defining Traditional Bazaar Areas and Shade Structures Via Parametric Design Methods

    Directory of Open Access Journals (Sweden)

    Ahmet Emre Dinçer

    2017-12-01

    Full Text Available For the continuation of life, people created various equipment and goods. To create mutual benefits, they’ve exchanged the overpruduced items with different products. This has begun the shopping act. By the increased amount of transactions, a need of defined area for shopping have arisen.  For a temporary time, trading areas have been developed at different locations at a certain period. In the course of time, beside trading, these areas served as socio-cultural spaces where the human relations were established. Moreover, demand of being able to immediately access to needed goods have emerged. This situation made having a permanent trading area essential. Therefore, enclosed and permanent trade areas from bazaar, inn, bedesten, arasta to shopping malls have emerged. Next to all these trading areas, traditional bazaar areas keep being established. Nowadays, there is a need of providing some determined comfort conditions to the users for these street alley bazaars. Decreasing the effect of unfavorable weather conditions and providing supportive certain services and units (like WCs, security, cleanliness, etc. are some of them. As a fundamental solution, without disengaging the user relations with the outside, shade structures are generally provided. Shade structures can support cleaning and similar jobs by gathering and using rainwater besides its purpose of protecting the user from bad weather conditions. Application examples of these systems are gradually increasing. However, it is necessary to develop new approaches, in order to stop these proposed shade structures, become prototypes and to adapt the proposal to its environment and to increase diversity. In this study, a convenient shade structure and its alternatives, which are adapted to environmental conditions, were designed to create a sample model for other bazaar areas. In models, basically, folding design approaches were pursued. For production of these shade structure models

  5. INITIAL DEVELOPMENT OF AÇAÍ PLANTS UNDER SHADE GRADATION

    Directory of Open Access Journals (Sweden)

    ELEANDRO CANDIDO DAPONT

    2016-01-01

    Full Text Available ABSTRACT In order to evaluate the effect of different levels of shading on açai (Euterpe oleracea Mart. plants development, an experiment was conducted at the nursery of Floresta, Rio Branco, AC. The experiment was arranged in a completely randomized design with six treatments and four replications of 25 plants, set as full sunlight and 18%, 35%, 50%, 70%, and 80% shading. The evaluation occurred 125 days after transplantation and the variables were stem diameter, root length, length of the aerial part, total length, dry matter of root, dry matter of aerial part, and total dry matter. With exception of root length, there was significant difference between treatments for all variables. The production of açai plants should be performed using 40% shading.

  6. Why Shade Coffee Does Not Guarantee Biodiversity Conservation.

    Directory of Open Access Journals (Sweden)

    César Tejeda-Cruz

    2010-03-01

    Full Text Available Over the past decade, various strategies have emerged to address critical habitat losses through agricultural expansion. The promotion of shade-grown, premium-priced coffee has been highlighted as one alternative. Our research, based on interviews with farmers in Chiapas, disputes some of the assumptions made by shade coffee campaigners. Results revealed a predisposition to converting forest to shade coffee production due to the socioeconomic challenges farmers face and the potential for increasing incomes. To ensure that their well-being is improved at the same time as reducing environmental impacts, there is clearly a need to provide more detailed information on who is responsible for enforcing certification criteria and how this should take place.

  7. Shading Performance on Terraced House Facades in Putrajaya, Malaysia

    Directory of Open Access Journals (Sweden)

    Hassan Ahmad Sanusi

    2015-01-01

    Full Text Available This study evaluates shading performance on house facades of selected three terraced houses in Putrajaya, Malaysia as the case studies. Terraced house type is selected for the case study because it is the most popular house type built in this country to house an increase of the urban population. Its total number built in urban area increases from 27% of the total dwellings in 1980 to 40% in 1990, and to slightly more than 60 per cent in 2000. The Case Study A, B, and C are atypical style of terraced house facade designs built in Putrajaya. These postmodern designs exhibit a range of complex geometric elements blending of colonial and traditional elements with colorful styles on the house facade. In this study, the time at which the sun path perpendicular to the house facade will be used to gain the results of shading performances when the house facades have their maximum exposure to the direct sunlight. The house facade was divided into two main parts which are opaque and glazing surface elements. The amount of shading area on the opaque and glazing surface was simulated using the SunTool program. In conclusion, the Case Study C had the highest average percentage of the shading area, which is 64.43%, followed by the Case Study A 60.41% and Case Study B 56.29%. These results showed that the facade designs had excellent horizontal shading elements with roof overhangs for high angle sunlight but they had weak vertical shading elements due to a lack of considerations of louvered elements to block low angle sunlight.

  8. Becoming less tolerant with age: sugar maple, shade, and ontogeny.

    Science.gov (United States)

    Sendall, Kerrie M; Lusk, Christopher H; Reich, Peter B

    2015-12-01

    Although shade tolerance is often assumed to be a fixed trait, recent work suggests ontogenetic changes in the light requirements of tree species. We determined the influence of gas exchange, biomass distribution, and self-shading on ontogenetic variation in the instantaneous aboveground carbon balance of Acer saccharum. We quantified the aboveground biomass distributions of 18 juveniles varying in height and growing in low light in a temperate forest understory in Minnesota, USA. Gas exchange rates of leaf and stem tissues were measured, and the crown architecture of each individual was quantified. The YPLANT program was used to estimate the self-shaded fraction of each crown and to model net leaf-level carbon gain. Leaf respiration and photosynthesis per gram of leaf tissue increased with plant size. In contrast, stem respiration rates per gram of stem tissue declined, reflecting a shift in the distribution of stem diameter sizes from smaller (with higher respiration) to larger diameter classes. However, these trends were outweighed by ontogenetic increases in self-shading (which reduces the net photosynthesis realized) and stem mass fraction (which increases the proportion of purely respiratory tissue) in terms of influence on net carbon exchange. As a result, net carbon gain per gram of aboveground plant tissue declined with increasing plant size, and the instantaneous aboveground light compensation point increased. When estimates of root respiration were included to model whole-plant carbon gain and light compensation points, relationships with plant size were even more pronounced. Our findings show how an interplay of gas exchange, self-shading, and biomass distribution shapes ontogenetic changes in shade tolerance.

  9. Combined solar collector and energy storage system

    Science.gov (United States)

    Jensen, R. N. (Inventor)

    1980-01-01

    A combined solar energy collector, fluid chiller and energy storage system is disclosed. A movable interior insulated panel in a storage tank is positionable flush against the storage tank wall to insulate the tank for energy storage. The movable interior insulated panel is alternately positionable to form a solar collector or fluid chiller through which the fluid flows by natural circulation.

  10. Iterative CT shading correction with no prior information

    Science.gov (United States)

    Wu, Pengwei; Sun, Xiaonan; Hu, Hongjie; Mao, Tingyu; Zhao, Wei; Sheng, Ke; Cheung, Alice A.; Niu, Tianye

    2015-11-01

    Shading artifacts in CT images are caused by scatter contamination, beam-hardening effect and other non-ideal imaging conditions. The purpose of this study is to propose a novel and general correction framework to eliminate low-frequency shading artifacts in CT images (e.g. cone-beam CT, low-kVp CT) without relying on prior information. The method is based on the general knowledge of the relatively uniform CT number distribution in one tissue component. The CT image is first segmented to construct a template image where each structure is filled with the same CT number of a specific tissue type. Then, by subtracting the ideal template from the CT image, the residual image from various error sources are generated. Since forward projection is an integration process, non-continuous shading artifacts in the image become continuous signals in a line integral. Thus, the residual image is forward projected and its line integral is low-pass filtered in order to estimate the error that causes shading artifacts. A compensation map is reconstructed from the filtered line integral error using a standard FDK algorithm and added back to the original image for shading correction. As the segmented image does not accurately depict a shaded CT image, the proposed scheme is iterated until the variation of the residual image is minimized. The proposed method is evaluated using cone-beam CT images of a Catphan©600 phantom and a pelvis patient, and low-kVp CT angiography images for carotid artery assessment. Compared with the CT image without correction, the proposed method reduces the overall CT number error from over 200 HU to be less than 30 HU and increases the spatial uniformity by a factor of 1.5. Low-contrast object is faithfully retained after the proposed correction. An effective iterative algorithm for shading correction in CT imaging is proposed that is only assisted by general anatomical information without relying on prior knowledge. The proposed method is thus practical

  11. Evaluation of a standard shade guide for color change after disinfection.

    Science.gov (United States)

    Pohjola, Randall M; Hackman, Steven T; Browning, William D

    2007-09-01

    To determine if surface disinfectants cause a change in the shade perception of a standard Classic Vitapan shade guide. Consistency in shade selection for dental restorations involves many factors, and one of the most important is the shade tabs used in the selection process. Ten shade tabs each of shades B2, D2, C1, and A3.5 were selected from the Classic Vitapan shade guide (Vident). All tabs were measured with the EasyShade shade device (Vident) at baseline. Three tabs of each shade were set aside as controls. The other 7 tabs of each shade were treated with the surface disinfectant Cavicide (Metrex Research) for 480 cycles to simulate a year's usage. After each 480 cycles, all the tabs were again measured with the EasyShade. This process was repeated to simulate 2 and 3 years of use. The data were analyzed to calculate the delta E 2000 for any change. A statistically significant increase was observed in the value (L*) and chroma (C*) after 2 and 3 years of simulated treatments. These changes were not perceptible to the clinician. The authors suggest that 1 standard shade guide be set aside to compare against those in clinical use to determine when they should be replaced.

  12. Heat stress in cows at pasture and benefit of shade in a temperate climate region

    Science.gov (United States)

    Veissier, Isabelle; Van laer, Eva; Palme, Rupert; Moons, Christel P. H.; Ampe, Bart; Sonck, Bart; Andanson, Stéphane; Tuyttens, Frank A. M.

    2017-11-01

    Under temperate climates, cattle are often at pasture in summer and are not necessarily provided with shade. We aimed at evaluating in a temperate region (Belgium) to what extent cattle may suffer from heat stress (measured through body temperature, respiration rate and panting score, cortisol or its metabolites in milk, and feces on hot days) and at assessing the potential benefits of shade. During the summer of 2012, 20 cows were kept on pasture without access to shade. During the summer of 2011, ten cows had access to shade (young trees with shade cloth hung between them), whereas ten cows had no access. Climatic conditions were quantified by the Heat Load Index (HLI). In animals without access to shade respiration rates, panting scores, rectal temperatures, and milk cortisol concentrations increased as HLI increased in both 2011 and 2012. Fecal cortisol metabolites varied with HLI in 2011 only. When cattle had access to shade, their use of shade increased as the HLI increased. This effect was more pronounced during the last part of the summer, possibly due to better acquaintance with the shade construction. In this case, shade use increased to 65% at the highest HLI (79). Shade tempered the effects on respiration, rectal temperature, and fecal cortisol metabolites. Milk cortisol was not influenced by HLI for cows using shade for > 10% of the day. Therefore, even in temperate areas, cattle may suffer from heat when they are at pasture in summer and providing shade can reduce such stress.

  13. Clinical Effect of Acute Complete Acromioclavicular Joint Dislocation Treated with Micro-Movable and Anatomical Acromioclavicular Plate

    Science.gov (United States)

    Liu, Qingjun; Miao, Jianyun; Lin, Bin; Guo, Zhimin

    2012-01-01

    Objectives: We evaluated the long-term clinical results of acute complete acromioclavicular dislocations treated with micro-movable and anatomical acromioclavicular plate. Methods: Open reduction and internal fixation was performed using the MAAP in 16 patients (10 males, 6 females; mean age 36 years; range16 to 63 years) with acute complete acromioclavicular joint dislocation. Radiographic evaluations were routinely conducted every 3 weeks until 3 months postoperatively. The MAAP were removed under local anesthesia after 3 months postoperatively. We evaluated the functional results by using the constant scoring system and radiological results in the last follow-up time. The mean follow up was 26 months (range 16 to 38 months). Results: The mean Constant score was 94 (range, 78 to 100). The results were excellent in 12 patients (75.0%), good in 3 patients (18.8%) and satisfactory in 1patient (6.2%). Three patients with scores of 80 to 90 had mild pain during activity, but have not affected the shoulder range of motion. One patient has both some pain and limited range of motion of shoulder joint. All patients but one have returned to their preoperative work without any limitations. Compared to the contralateral side, radiography showed anatomical reposition in the vertical plane in 14 cases, slight loss of reduction in 2 older patients. Conclusion: We recommend the MAAP fixation for surgical treatment of acute complete acromioclavicular joint dislocation as it could provide satisfactory shoulder functions and clinical results, with lower complication rate. However, it is necessary to continue to observe the clinical effects of this fixation technique. PMID:23091410

  14. Half-Space Temperature Field with a Movable Thermally Thin-Coated Boundary Under External Heat Flux

    Directory of Open Access Journals (Sweden)

    P. A. Vlasov

    2014-01-01

    Full Text Available In engineering practice analytical methods of the mathematical theory of heat conduction hold a special place. This is due to many reasons, in particular, because of the fact that the solutions of the relevant problems represented in analytically closed form, can be used not only for a parametric analysis of the studied temperature field and to explore the specific features of its formation, but also to test the developed computational algorithms, which are aimed at solving real-world application heat and mass transfer problems. Difficulties arising when using the analytical mathematical theory methods of heat conduction in practice are well known. Also they are significantly exacerbated if the boundaries of the system under study are movable, even in the simplest case, when the law of motion is known.The main goal of the conducted research is to have an analytically closed-form problem solution for finding the orthotropic half-space temperature field, a boundary of which has thermally thin coating exposed to extremely concentrated stationary external heat flux and uniformly moves parallel to itself.The assumption that the covering of the boundary is thermally thin, allowed to realize the idea of \\concentrated capacity", that is to accept the hypothesis that the mean-thickness coating temperature is equal to the temperature of its boundaries. This assumption allowed us to reduce the problem under consideration to a mixed problem for a parabolic equation with a specific boundary condition.The Hankel integral transform of zero order with respect to the radial variable and the Laplace transform with respect to the temporal variable were used to solve the reduced problem. These techniques have allowed us to submit the required solution as an iterated integral.

  15. Physiological reactions in goat breeds maintained under shade, sun and partially shaded areas

    Directory of Open Access Journals (Sweden)

    Luís Fernando Dias Medeiros

    2015-12-01

    Full Text Available ABSTRACT. Medeiros L.F.D., Rodrigues V.C., Vieira D.H., Souza S.L.G. de, Neto O.C., Figueiredo N. de, Pinto C.F.D., Miranda A.L. & Violento C.B. [Physiological reactions in goat breeds maintained under shade, sun and partially shaded areas.] Reações fisiológicas de cabras em diferentes ambientes e coeficiente de tolerância ao calor em cabritos. Revista Brasileira de Medicina Veterinária, 37(4:286-296, 2015. Departamento de Reprodução e Avaliação Animal, Instituto de Zootecnia, Universidade Federal Rural do Rio de Janeiro, BR 465 Km 7, Seropédica, RJ 23851-970, Brasil. E-mail: diasmedeiros@yahoo.com.br The experiment was carried out to measure the effects of thermal stress on the rectal temperature (RT and respiratory frequency (RF, in animals of Boer and Saanen breeds, under the conditions of hot and humid climate of city of Rio de Janeiro, Baixada Fluminense, South East Region of Brazil; also the heat tolerance coefficient (HTC of Amakiri e Funcho was applied on pure and crossbreeds kids. The goats were divided into three groups, each group consisting of four females from each breed group. Each group was subjected to different surroundings, constituted by three experimental treatment: treatment A, with a sun protected enclosed area; treatment B, a sun exposed area without covering; and treatment C, area with a 50% covered section and a 50% sun exposed area, which permitted free circulation of the goats. A Balanced Latin Square was used. The RT and RF of the goats, in the afternoon periods (l5h00, were higher, than in the morning periods (09h00. The animals kept in the sun presented much higher results, especially in the afternoon periods, than the animals in the other two confinement areas. There were no differences in the RT and RF of the groups maintained in the shade or in partially covered area. There were differences in the RT and RF measurements between the two breeds, in the morning periods and in the afternoon periods

  16. Plasticity in seedling morphology, biomass allocation and physiology among ten temperate tree species in response to shade is related to shade tolerance and not leaf habit.

    Science.gov (United States)

    Chmura, D J; Modrzyński, J; Chmielarz, P; Tjoelker, M G

    2017-03-01

    Mechanisms of shade tolerance in tree seedlings, and thus growth in shade, may differ by leaf habit and vary with ontogeny following seed germination. To examine early responses of seedlings to shade in relation to morphological, physiological and biomass allocation traits, we compared seedlings of 10 temperate species, varying in their leaf habit (broadleaved versus needle-leaved) and observed tolerance to shade, when growing in two contrasting light treatments - open (about 20% of full sunlight) and shade (about 5% of full sunlight). We analyzed biomass allocation and its response to shade using allometric relationships. We also measured leaf gas exchange rates and leaf N in the two light treatments. Compared to the open treatment, shading significantly increased traits typically associated with high relative growth rate (RGR) - leaf area ratio (LAR), specific leaf area (SLA), and allocation of biomass into leaves, and reduced seedling mass and allocation to roots, and net assimilation rate (NAR). Interestingly, RGR was not affected by light treatment, likely because of morphological and physiological adjustments in shaded plants that offset reductions of in situ net assimilation of carbon in shade. Leaf area-based rates of light-saturated leaf gas exchange differed among species groups, but not between light treatments, as leaf N concentration increased in concert with increased SLA in shade. We found little evidence to support the hypothesis of a increased plasticity of broadleaved species compared to needle-leaved conifers in response to shade. However, an expectation of higher plasticity in shade-intolerant species than in shade-tolerant ones, and in leaf and plant morphology than in biomass allocation was supported across species of contrasting leaf habit. © 2016 German Botanical Society and The Royal Botanical Society of the Netherlands.

  17. Effects of shading on Vallisneria natans (Lour.) H. Hara growth

    DEFF Research Database (Denmark)

    Fox, Anthony David; Meng, F; Shen, X

    2013-01-01

    Effects of surface shading were measured on above- and below-ground biomass and fruit production of Vallisneria natans (Lour.) H. Hara plants grown from seed in replicated microcosm experiments, based on a control (no shading) and four treatments (25%, 50%, 75% and 90% shading). Above- and below-...... spp. at seasonally inundated wetlands in the Yangtze River floodplain could, by shading, have contributed to the reduction in annual biomass and seed production of V. natans, contributing to declines in distribution and abundance....

  18. Flower abscission in Vitis vinifera L. triggered by gibberellic acid and shade discloses differences in the underlying metabolic pathways

    Directory of Open Access Journals (Sweden)

    Sara eDomingos

    2015-06-01

    Full Text Available Understanding abscission is both a biological and an agronomic challenge. Flower abscission induced independently by shade and gibberellic acid (GAc sprays was monitored in grapevine (Vitis vinifera L. growing under a soilless greenhouse system during two seasonal growing conditions, in an early and late production cycle. Physiological and metabolic changes triggered by each of the two distinct stimuli were determined. Environmental conditions exerted a significant effect on fruit set as showed by the higher natural drop rate recorded in the late production cycle with respect to the early cycle. Shade and GAc treatments increased the percentage of flower drop compared to the control, and at a similar degree, during the late production cycle. The reduction of leaf gas exchanges under shade conditions was not observed in GAc treated vines. The metabolic profile assessed in samples collected during the late cycle differently affected primary and secondary metabolisms and showed that most of the treatment-resulting variations occurred in opposite trends in inflorescences unbalanced in either hormonal or energy deficit abscission-inducing signals. Particularly concerning carbohydrates metabolism, sucrose, glucose, tricarboxylic acid (TCA metabolites and intermediates of the raffinose family oligosaccharides pathway were lower in shaded and higher in GAc samples. Altered oxidative stress remediation mechanisms and indolacetic acid (IAA concentration were identified as abscission signatures common to both stimuli. According to the global analysis performed, we report that grape flower abscission mechanisms triggered by GAc application and C-starvation are not based on the same metabolic pathways.

  19. Reliability of shade selection using an intraoral spectrophotometer.

    Science.gov (United States)

    Witkowski, Siegbert; Yajima, Nao-Daniel; Wolkewitz, Martin; Strub, Jorge R

    2012-06-01

    In this study, we evaluate the accuracy and reproducibility of human tooth shade selection using a digital spectrophotometer. Variability among examiners and illumination conditions were tested for possible influence on measurement reproducibility. Fifteen intact anterior teeth of 15 subjects were evaluated for their shade using a digital spectrophotometer (Crystaleye, Olympus, Tokyo, Japan) by two examiners under the same light conditions representing a dental laboratory situation. Each examiner performed the measurement ten times on the labial surface of each tooth containing three evaluation sides (cervical, body, incisal). Commission International on Illumination color space values for L* (lightness), a* (red/green), and b* (yellow/blue) were obtained from each evaluated side. Examiner 2 repeated the measurements of the same subjects under different light conditions (i.e., a dental unit with a chairside lamp). To describe measurement precision, the mean color difference from the mean metric was used. The computed confidence interval (CI) value 5.228 (4.6598-5.8615) reflected (represented) the validity of the measurements. Least square mean analysis of the values obtained by examiners 1 and 2 or under different illumination conditions revealed no statistically significant differences (CI = 95%). Within the limits of the present study, the accuracy and reproducibility of dental shade selection using the tested spectrophotometer with respect to examiner and illumination conditions reflected the reliability of this device. This study suggests that the tested spectrophotometer can be recommended for the clinical application of shade selection.

  20. Shades of African values and interests in Nigeria's international ...

    African Journals Online (AJOL)

    Shades of African values and interests in Nigeria's international relations: investigating the gains and the costs, 1960 – 2014. ... of policies that ensure that the country recovers all she lost in her years of naivety in I.R. The study adopted the historical methodology which emphasizes critical analyses and interpretation of facts.

  1. The use of shaded fuelbreaks in landscape fire management

    Science.gov (United States)

    James K. Agee; Bernie Bahro; Mark A. Finney; Philip N. Omi; David B. Sapsis; Carl N. Skinner; Jan W. van Wagtendonk; C. Phillip Weatherspoon

    2000-01-01

    Shaded fuelbreaks and larger landscape fuel treatments, such as prescribed fire, are receiving renewed interest as forest protection strategies in the western United States. The effectiveness of fuelbreaks remains a subject of debate because of differing fuelbreak objectives, prescriptions for creation and maintenance, and their placement in landscapes with differing...

  2. Improvement of Shade Resilience in Photovoltaic Modules Using Buck Converters in a Smart Module Architecture

    NARCIS (Netherlands)

    Golroodbari, S. Mirbagheri; Waal, Arjen. de; Sark, Wilfried van

    2018-01-01

    Partial shading has a nonlinear effect on the performance of photovoltaic (PV) modules. Different methods of optimizing energy harvesting under partial shading conditions have been suggested to mitigate this issue. In this paper, a smart PV module architecture is proposed for improvement of shade

  3. Leaf traits show different relationships with shade tolerance in moist versus dry tropical forests

    NARCIS (Netherlands)

    Poorter, L.

    2009-01-01

    ¿ Shade tolerance is the central paradigm for understanding forest succession and dynamics, but there is considerable debate as to what the salient features of shade tolerance are, whether adult leaves show similar shade adaptations to seedling leaves, and whether the same leaf adaptations are found

  4. Convergent evolution towards high net carbon gain efficiency contributes to the shade tolerance of palms (Arecaceae)

    NARCIS (Netherlands)

    Ma, Ren Yi; Zhang, Jiao Lin; Cavaleri, Molly A.; Sterck, Frank; Strijk, J.S.; Cao, Kun Fang

    2015-01-01

    Most palm species occur in the shaded lower strata of tropical rain forests, but how their traits relate to shade adaptation is poorly understood. We hypothesized that palms are adapted to the shade of their native habitats by convergent evolution towards high net carbon gain efficiency (CGEn),

  5. When growing tall is not an option : contrasting shade avoidance responses in two wild Geranium species

    NARCIS (Netherlands)

    Gommers, C.M.M.

    2016-01-01

    Plants can deal with shade in different ways. Sun-adapted species express a set of growth traits to reach for light; the so-called shade avoidance syndrome (SAS). However, shade-tolerant species from the forest understory are not able to outgrow surrounding trees and adopt a tolerance strategy

  6. A novel two-step method for screening shade tolerant mutant plants via dwarfism

    Science.gov (United States)

    When subjected to shade, plants undergo rapid shoot elongation, which often makes them more prone to disease and mechanical damage. It has been reported that, in turfgrass, induced dwarfism can enhance shade tolerance. Here, we describe a two-step procedure for isolating shade tolerant mutants of ...

  7. Multiscale Simulation of Porous Ceramics Based on Movable Cellular Automaton Method

    Science.gov (United States)

    Smolin, A.; Smolin, I.; Eremina, G.; Smolina, I.

    2017-10-01

    The paper presents a model for simulating mechanical behaviour of multiscale porous ceramics based on movable cellular automaton method, which is a novel particle method in computational mechanics of solid. The initial scale of the proposed approach corresponds to the characteristic size of the smallest pores in the ceramics. At this scale, we model uniaxial compression of several representative samples with an explicit account of pores of the same size but with the random unique position in space. As a result, we get the average values of Young’s modulus and strength, as well as the parameters of the Weibull distribution of these properties at the current scale level. These data allow us to describe the material behaviour at the next scale level were only the larger pores are considered explicitly, while the influence of small pores is included via the effective properties determined at the previous scale level. If the pore size distribution function of the material has N maxima we need to perform computations for N - 1 levels in order to get the properties from the lowest scale up to the macroscale step by step. The proposed approach was applied to modelling zirconia ceramics with bimodal pore size distribution. The obtained results show correct behaviour of the model sample at the macroscale.

  8. The Multipoint Global Shape Optimization of Flying Configuration with Movable Leading Edges Flaps

    Directory of Open Access Journals (Sweden)

    Adriana NASTASE

    2012-12-01

    Full Text Available The aerodynamical global optimized (GO shape of flying configuration (FC, at two cruising Mach numbers, can be realized by morphing. Movable leading edge flaps are used for this purpose. The equations of the surfaces of the wing, of the fuselage and of the flaps in stretched position are approximated in form of superpositions of homogeneous polynomes in two variables with free coefficients. These coefficients together with the similarity parameters of the planform of the FC are the free parameters of the global optimization. Two enlarged variational problems with free boundaries occur. The first one consists in the determination of the GO shape of the wing-fuselageFC, with the flaps in retracted position, which must be of minimum drag, at higher cruising Mach number. The second enlarged variational problem consists in the determination of the GO shape of the flaps in stretched position in such a manner that the entire FC shall be of minimum drag at the second lower Mach number. The iterative optimum-optimorum (OO theory of the author is used for the solving of these both enlarged variational problems. The inviscid GO shape of the FC is used only in the first step of iteration and the own developed hybrid solutions for the compressible Navier-Stokes partial-differential equations (PDEs are used for the determination of the friction drag coefficient and up the second step of iteration of OO theory.

  9. Characterization of a vertically movable gate field effect transistor using a silicon-on-insulator wafer

    Science.gov (United States)

    Song, In-Hyouk; Forfang, William B. D.; Cole, Bryan; You, Byoung Hee

    2014-10-01

    The vertically movable gate field effect transistor (VMGFET) is a FET-based sensing element, whose gate moves in a vertical direction over the channel. A VMGFET gate covers the region between source and drain. A 1 μm thick air layer separates the gate and the substrate of the VMGFET. A novel fabrication process to form a VMGFET using a silicon-on-insulator (SOI) wafer provides minimal internal stress of the gate structure. The enhancement-type n-channel VMGFET is fabricated with the threshold voltage of 2.32 V in steady state. A non-inverting amplifier is designed and integrated on a printable circuit board (PCB) to characterize device sensitivity and mechanical properties. The VMGFET is mechanically coupled to a speaker membrane to apply mechanical vibration. The oscillated drain current of FET are monitored and sampled with NI LabVIEW. The frequency of the output signal correlates with that of the input stimulus. The resonance frequency of the fabricated VMGFET is measured to be 1.11 kHz. The device sensitivity linearly increases by 0.106 mV/g Hz in the range of 150 Hz and 1 kHz.

  10. Characterization of a vertically movable gate field effect transistor using a silicon-on-insulator wafer

    International Nuclear Information System (INIS)

    Song, In-Hyouk; Forfang, William B D; Cole, Bryan; Hee You, Byoung

    2014-01-01

    The vertically movable gate field effect transistor (VMGFET) is a FET-based sensing element, whose gate moves in a vertical direction over the channel. A VMGFET gate covers the region between source and drain. A 1 μm thick air layer separates the gate and the substrate of the VMGFET. A novel fabrication process to form a VMGFET using a silicon-on-insulator (SOI) wafer provides minimal internal stress of the gate structure. The enhancement-type n-channel VMGFET is fabricated with the threshold voltage of 2.32 V in steady state. A non-inverting amplifier is designed and integrated on a printable circuit board (PCB) to characterize device sensitivity and mechanical properties. The VMGFET is mechanically coupled to a speaker membrane to apply mechanical vibration. The oscillated drain current of FET are monitored and sampled with NI LabVIEW. The frequency of the output signal correlates with that of the input stimulus. The resonance frequency of the fabricated VMGFET is measured to be 1.11 kHz. The device sensitivity linearly increases by 0.106 mV/g Hz in the range of 150 Hz and 1 kHz. (paper)

  11. Active and passive kink mode studies in a tokamak with a movable ferromagnetic wall

    Energy Technology Data Exchange (ETDEWEB)

    Levesque, J. P.; Hughes, P. E.; Bialek, J.; Byrne, P. J.; Mauel, M. E.; Navratil, G. A.; Peng, Q.; Rhodes, D. J.; Stoafer, C. C. [Department of Applied Physics and Applied Mathematics, Columbia University, 500 W. 120th Street, New York, New York 10027 (United States)

    2015-05-15

    High-resolution active and passive kink mode studies are conducted in a tokamak with an adjustable ferromagnetic wall near the plasma surface. Ferritic tiles made from 5.6 mm thick Hiperco{sup ®} 50 alloy have been mounted on the plasma-facing side of half of the in-vessel movable wall segments in the High Beta Tokamak-Extended Pulse device [D. A. Maurer et al., Plasma Phys. Controlled Fusion 53, 074016 (2011)] in order to explore ferritic resistive wall mode stability. Low-activation ferritic steels are a candidate for structural components of a fusion reactor, and these experiments examine MHD stability of plasmas with nearby ferromagnetic material. Plasma-wall separation for alternating ferritic and non-ferritic wall segments is adjusted between discharges without opening the vacuum vessel. Amplification of applied resonant magnetic perturbations and plasma disruptivity are observed to increase when the ferromagnetic wall is close to plasma surface instead of the standard stainless steel wall. Rapidly rotating m/n=3/1 external kink modes have higher growth rates with the nearby ferritic wall. Feedback suppression of kinks is still as effective as before the installation of ferritic material in vessel, in spite of increased mode growth rates.

  12. Research on the electromagnetic structure of movable coil electromagnet drive mechanism for reactor control rod

    International Nuclear Information System (INIS)

    Zhang Jige; Yian Huijie; Wu Yuanqiang; Wu Xinxin; Yu Suyuan; He Shuyan

    2007-01-01

    The movable coil electromagnet drive mechanism (MCEDM) is a new drive scheme for the reactor control rod, and it has a simple structure, good security and reliability property, etc. MCEDM with an air cooled structure has been used in the land research reactor. In order to apply MCEDM to the mobile reactor, experimental and theoretical study on the electromagnet with an oil-water cooled structure and a single magnetic flux circuit (called the type A electro-magnet) has been completed. It is proven by the experiment and theory that the oil-water cooled structure is an excellent measure to increase the coil current of MCEDM. Moreover, a type B electromagnet with an oil-water cooled structure and double magnetic flux circuits is designed to further increase the magnetic force of MCEDM. The analysis of finite element method shows that the type B electromagnet could double the saturation current of type A electro-magnet and the magnetic force of type B electromagnet is greater than that of the type A electromagnet. Moreover, it is proven that the dynamic property of type B electromagnet is better than type A electromagnet. (author)

  13. Electromechanical model to predict the movability of liquids in an electrowetting-on-dielectric microfluidic device

    Science.gov (United States)

    Torabinia, Matin; Farzbod, Ali; Moon, Hyejin

    2018-04-01

    In electrowetting-on-dielectric (EWOD) microfluidics, a motion of a fluid is created by a voltage applied to the fluid/surface interface. Water and aqueous solutions are the most frequently used fluids in EWOD devices. In order for EWOD microfluidics to be a versatile platform for various applications, however, movability of different types of fluids other than aqueous solutions should be understood. An electromechanical model using a simple RC circuit has been used to predict the mechanical force exerted on a liquid droplet upon voltage application. In this present study, two important features missed in previous works are addressed. Energy dissipation by contact line friction is considered in the new model as the form of resistor. The phase angle is taken into account in the analysis of the AC circuit. The new electromechanical model and computation results are validated with experimental measurements of forces on two different liquids. The model is then used to explain influences of contact angle hysteresis, surface tension, conductivity, and dielectric constant of fluids to the mechanical force on a liquid droplet.

  14. A Labeling Model Based on the Region of Movability for Point-Feature Label Placement

    Directory of Open Access Journals (Sweden)

    Lin Li

    2016-09-01

    Full Text Available Automatic point-feature label placement (PFLP is a fundamental task for map visualization. As the dominant solutions to the PFLP problem, fixed-position and slider models have been widely studied in previous research. However, the candidate labels generated with these models are set to certain fixed positions or a specified track line for sliding. Thus, the whole surrounding space of a point feature is not sufficiently used for labeling. Hence, this paper proposes a novel label model based on the region of movability, which comes from plane collision detection theory. The model defines a complete conflict-free search space for label placement. On the premise of no conflict with the point, line, and area features, the proposed model utilizes the surrounding zone of the point feature to generate candidate label positions. By combining with heuristic search method, the model achieves high-quality label placement. In addition, the flexibility of the proposed model enables placing arbitrarily shaped labels.

  15. Large-region acoustic source mapping using a movable array and sparse covariance fitting.

    Science.gov (United States)

    Zhao, Shengkui; Tuna, Cagdas; Nguyen, Thi Ngoc Tho; Jones, Douglas L

    2017-01-01

    Large-region acoustic source mapping is important for city-scale noise monitoring. Approaches using a single-position measurement scheme to scan large regions using small arrays cannot provide clean acoustic source maps, while deploying large arrays spanning the entire region of interest is prohibitively expensive. A multiple-position measurement scheme is applied to scan large regions at multiple spatial positions using a movable array of small size. Based on the multiple-position measurement scheme, a sparse-constrained multiple-position vectorized covariance matrix fitting approach is presented. In the proposed approach, the overall sample covariance matrix of the incoherent virtual array is first estimated using the multiple-position array data and then vectorized using the Khatri-Rao (KR) product. A linear model is then constructed for fitting the vectorized covariance matrix and a sparse-constrained reconstruction algorithm is proposed for recovering source powers from the model. The user parameter settings are discussed. The proposed approach is tested on a 30 m × 40 m region and a 60 m × 40 m region using simulated and measured data. Much cleaner acoustic source maps and lower sound pressure level errors are obtained compared to the beamforming approaches and the previous sparse approach [Zhao, Tuna, Nguyen, and Jones, Proc. IEEE Intl. Conf. on Acoustics, Speech and Signal Processing (ICASSP) (2016)].

  16. Controller Design and Experiment for Tracking Mount of Movable SLR, ARGO-M

    Directory of Open Access Journals (Sweden)

    Cheol Hoon Park

    2012-04-01

    Full Text Available Controller design procedure for prototype tracking mount of Movable SLR (Satellite Laser Ranging, ARGO-M is presented. Tracking mount of ARGO-M is altitude-azimuth type and it has two axes of elevation and azimuth to control its position. Controller consists of velocity and acceleration feed-forward controller, position controller at outer loop, velocity controller at inner loop. There are two kinds of position control modes. One is the pointing mode to move from one position to the other position as fast as possible and the other one is tracking mode to follow SLR trajectory as precise as possible. Because the requirement of tracking accuracy is less than 5 arcsec and it is very tight error budget, a sophisticated controller needs to be prepared to meet the accuracy. Especially, ARGO-M is using the cross-roller bearing at each axis to increase the mechanical accuracy, which requires add-on controller DOB (Disturbance observer to suppress friction load and low frequency disturbances. The pointing and tracking performance of the designed controller is simulated and visualized using MATLAB/ Simulink and SimMechanics and the experimental results using test are presented as well.

  17. Simulation of beta radiator handling procedures in nuclear medicine by means of a movable hand phantom.

    Science.gov (United States)

    Blunck, Ch; Becker, F; Urban, M

    2011-03-01

    In nuclear medicine therapies, people working with beta radiators such as (90)Y may be exposed to non-negligible partial body doses. For radiation protection, it is important to know the characteristics of the radiation field and possible dose exposures at relevant positions in the working area. Besides extensive measurements, simulations can provide these data. For this purpose, a movable hand phantom for Monte Carlo simulations was developed. Specific beta radiator handling scenarios can be modelled interactively with forward kinematics or automatically with an inverse kinematics procedure. As a first investigation, the dose distribution on a medical doctor's hand injecting a (90)Y solution was measured and simulated with the phantom. Modelling was done with the interactive method based on five consecutive frames from a video recorded during the injection. Owing to the use of only one camera, not each detail of the radiation scenario is visible in the video. In spite of systematic uncertainties, the measured and simulated dose values are in good agreement.

  18. Design of TFTR movable limiter blades for ohmic and neutral-beam-heated plasmas

    International Nuclear Information System (INIS)

    Doll, D.W.; Ulrickson, M.A.; Cecchi, J.L.; Citrolo, J.C.; Weissenburger, D.; Bialek, J.

    1981-10-01

    A new set of movable limiter blades has been designed for TFTR that will meet both the requirements of the 4 MW ohmic heated and the 33 MW neutral beam heated plasmas. This is accomplished with three limiter blades each having and elliptical shape along the toroidal direction. Heat flux levels are acceptable for both ohmic heated and pre-strong compression plasmas. The construction consists of graphite tiles attached to cooled backing plates. The tiles have an average thickness of approx. 4.7 cm and are drawn against the backing plate with spring loaded fasteners that are keyed into the graphite. The cooled backing plate provides the structure for resisting disruption and fault induced loads. A set of rollers attached to the top and bottom blades allow them to be expanded and closed in order to vary the plasma surface for scaling experiments. Water cooling lines penetrate only the mid-plane port cover/support plate in such a way as to avoid bolted water connections inside the vacuum boundary and at the same time allow blade movement. Both the upper and lower blades are attached to the mid-plane limiter blade through pivots. Pivot connections are protected against arcing with an alumina coating and a shunt bar strap. Remote handling is considered throughout the design

  19. [FEATURES OF THE CONTENT OF MOVABLE FORMS OF HEAVY METALS AND SELENIUM IN SOILS OF THE YAROSLAVL REGION].

    Science.gov (United States)

    Bakaeva, E A; Eremeyshvili, A V

    2016-01-01

    With the use of the method of inversion voltammetry there was analyzed the content of movableforms of trace elements: (selenium, zinc, copper lead, cadmium) in soils in the Yaroslavl district of the Yaroslavl region, and also content of zinc, copper lead, cadmium in soils and snow cover in the city of Yaroslavl. According to values of concentrations of movable compounds in soils determined trace elements can be ranked into the following row: zinc > lead > copper > selenium > cadmium. There was revealed insufficient if compared with literature data concentrations, content of movable compounds of selenium, copper and zinc in examined explored soils. The maximal concentrations of lead are revealed in the close proximity to both the city of Yaroslavl and large highways of the city. It indicates to the anthropogenic pollution of soils by this element.

  20. The linear shade guide design of Vita 3D-master performs as well as the original design of the Vita 3D-master.

    Science.gov (United States)

    Corcodel, N; Rammelsberg, P; Jakstat, H; Moldovan, O; Schwarz, S; Hassel, A J

    2010-11-01

    Visual tooth colour assessment by use of the Vita 3D-Master(®) (3D; Vita Zahnfabrik, Bad Säckingen, Germany) is well documented. To improve handling, a new linear arrangement of the shade tabs has been introduced (LG; Linearguide 3D-Master(®) ). The purpose of this study was to investigate whether the linear design has an effect on shade matching. Fifty-six students underwent identical, theoretical and practical training, by use of an Internet learning module [Toothguide Training Software(®) (TT)] and a standardised training programme [Toothguide Training Box(®) (TTB)]. Each student then matched 30 randomly chosen shade tabs presented in an intra-oral setting by a standardised device [Toothguide Check Box(®) (TCB)]; 15 matches were made using the 3D and 15 using the LG shade guide system, under a daylight lamp (840 matches for each guide). It was recorded to what extent the presented and selected shade tabs, or the lightness group of the tabs, matched, also the needed time for colour matching. The results showed that 35% of perfect matches were observed for the 3D and 32% for the LG. The lightness group was correct in 59% of cases for 3D and 56% for LG. Mean time needed for matching of tabs and lightness group was no different between groups (no significant difference for any assessment). Within the limitations of the study design, the colour assessment with regard to performance and time needed in shade matching was not different with the LG or the 3D. Therefore, the user should choose which shade tab arrangement is more applicable. © 2010 Blackwell Publishing Ltd.

  1. Shaded Relief with Height as Color, North America

    Science.gov (United States)

    2003-01-01

    This image of North America was generated with data from the Shuttle Radar Topography Mission (SRTM). For this broad view the resolution of the data was first reduced to 30 arcseconds (about 928 meters north-south and 736 meters east-west in central North America), matching the best previously existing global digital topographic data set called GTOPO30. The data were then resampled to a Mercator projection with approximately square pixels (about one kilometer, or 0.6 miles, on each side). Even at this decreased resolution the variety of landforms comprising the North American continent is readily apparent.Active tectonics (structural deformation of the Earth's crust) along and near the Pacific -- North American plate boundary creates the great topographic relief seen along the Pacific coast. Earth's crustal plates converge in southern Mexico and in the northwest United States, melting the crust and producing volcanic cones. Along the California coast, the plates are sliding laterally past each other, producing a pattern of slices within the San Andreas fault system. And, where the plates are diverging, the crust appears torn apart as one huge tear along the Gulf of California (northwest Mexico), and as the several fractures comprising the Basin and Range province (in and around Nevada).Across the Great Plains, erosional patterns dominate, with streams channels surrounding and penetrating the remnants of older smooth slopes east of the Rocky Mountains. This same erosion process is exposing the bedrock structural patterns of the Black Hills in South Dakota and the Ozark Mountains in Arkansas. Lateral erosion and sediment deposition by the Mississippi River has produced the flatlands of the lower Mississippi Valley and the Mississippi Delta.To the north, evidence of the glaciers of the last ice age is widely found, particularly east of the Canadian Rocky Mountains and around the Great Lakes. From northeastern British Columbia, across Alberta, Saskatchewan, and

  2. Evaluation of Dental Shade Guide Variability Using Cross-Polarized Photography.

    Science.gov (United States)

    Gurrea, Jon; Gurrea, Marta; Bruguera, August; Sampaio, Camila S; Janal, Malvin; Bonfante, Estevam; Coelho, Paulo G; Hirata, Ronaldo

    2016-01-01

    This study evaluated color variability in the A hue between the VITA Classical (VITA Zahnfabrik) shade guide and four other VITA-coded ceramic shade guides using a Canon EOS 60D camera and software (Photoshop CC, Adobe). A total of 125 photographs were taken, 5 per shade tab for each of 5 shades (A1 to A4) from the following shade guides: VITA Classical (control), IPS e.max Ceram (Ivoclar Vivadent), IPS d.SIGN (Ivoclar Vivadent), Initial ZI (GC), and Creation CC (Creation Willi Geller). Photos were processed with Adobe Photoshop CC to allow standardized evaluation of hue, chroma, and value between shade tabs. None of the VITA-coded shade tabs fully matched the VITA Classical shade tab for hue, chroma, or value. The VITA-coded shade guides evaluated herein showed an overall unmatched shade in all tabs when compared with the control, suggesting that shade selection should be made using the guide produced by the manufacturer of the ceramic intended for the final restoration.

  3. A novel two-step method for screening shade tolerant mutant plants via dwarfism

    Directory of Open Access Journals (Sweden)

    Wei Li

    2016-10-01

    Full Text Available When subjected to shade, plants undergo rapid shoot elongation, which often makes them more prone to disease and mechanical damage. Shade-tolerant plants can be difficult to breed; however, they offer a substantial benefit over other varieties in low-light areas. Although perennial ryegrass (Lolium perenne L. is a popular species of turf grasses because of their good appearance and fast establishment, the plant normally does not perform well under shade conditions. It has been reported that, in turfgrass, induced dwarfism can enhance shade tolerance. Here we describe a two-step procedure for isolating shade tolerant mutants of perennial ryegrass by first screening for dominant dwarf mutants, and then screening dwarf plants for shade tolerance. The two-step screening process to isolate shade tolerant mutants can be done efficiently with limited space at early seedling stages, which enables quick and efficient isolation of shade tolerant mutants, and thus facilitates development of shade tolerant new cultivars of turfgrasses. Using the method, we isolated 136 dwarf mutants from 300,000 mutagenized seeds, with 65 being shade tolerant (0.022%. When screened directly for shade tolerance, we recovered only four mutants from a population of 150,000 (0.003% mutagenized seeds. One shade tolerant mutant, shadow-1, was characterized in detail. In addition to dwarfism, shadow-1 and its sexual progeny displayed high degrees of tolerance to both natural and artificial shade. We showed that endogenous gibberellin (GA content in shadow-1 was higher than wild-type controls, and shadow-1 was also partially GA insensitive. Our novel, simple and effective two-step screening method should be applicable to breeding shade tolerant cultivars of turfgrasses, ground covers, and other economically important crop plants that can be used under canopies of existing vegetation to increase productivity per unit area of land.

  4. Real and virtual explorations of the environment and interactive tracking of movable objects for the blind on the basis of tactile-acoustical maps and 3D environment models.

    Science.gov (United States)

    Hub, Andreas; Hartter, Tim; Kombrink, Stefan; Ertl, Thomas

    2008-01-01

    PURPOSE.: This study describes the development of a multi-functional assistant system for the blind which combines localisation, real and virtual navigation within modelled environments and the identification and tracking of fixed and movable objects. The approximate position of buildings is determined with a global positioning sensor (GPS), then the user establishes exact position at a specific landmark, like a door. This location initialises indoor navigation, based on an inertial sensor, a step recognition algorithm and map. Tracking of movable objects is provided by another inertial sensor and a head-mounted stereo camera, combined with 3D environmental models. This study developed an algorithm based on shape and colour to identify objects and used a common face detection algorithm to inform the user of the presence and position of others. The system allows blind people to determine their position with approximately 1 metre accuracy. Virtual exploration of the environment can be accomplished by moving one's finger on a touch screen of a small portable tablet PC. The name of rooms, building features and hazards, modelled objects and their positions are presented acoustically or in Braille. Given adequate environmental models, this system offers blind people the opportunity to navigate independently and safely, even within unknown environments. Additionally, the system facilitates education and rehabilitation by providing, in several languages, object names, features and relative positions.

  5. The movable digital planetary from the Cruzeiro do Sul University as a distributing agent of astronomy

    Science.gov (United States)

    Voelzke, Marcos Rincon

    2012-10-01

    The Movable Digital Planetary from the Cruzeiro do Sul University has been working in order to publicize and to popularize Astronomy, in particular among students and teachers of Primary (EF) and Medium (EM) Education in municipal and state schools of the City of São Paulo, but also for the general public at large. The aim of this paper is to show and publicize the activities already undertaken by this planetary. In 2010, several presentations were recorded, such as: for the School Cruzeiro do Sul, in São Miguel Paulista, serving 161 children in the EF; Eighth Symposium on Education, Cruzeiro do Sul University, 75 students; NGO Educational Project Capuano, Anália Franco, 30 adults: Fair Student Guide in Shopping Center Norte, 455 people; NGO Association for Charitable Paulista, Burgo Paulista, 70 children; Workshop of Advanced Computing and Informatics, Cruzeiro do Sul University, 37 students; Day of Social Responsibility, Social Work in Don Bosco, Itaquera, 133 people! . In 2011 the presentations took place during the XIII Regional Meeting of Astronomy Education at Cruzeiro do Sul University, serving 112 teachers; College Cruzeiro do Sul, São Miguel Paulista, 356 children of the EF; College Brasilia from São Paulo, Anália Franco, 102 children in the EF and for the Scout Group Caramuru, São Paulo, 104 children. The applied methodology in all presentations consisted of the exhibition of two videos about Astronomy with a subsequent discussion about the presented issues. Previous surveys have shown a great interest in the majority of participants in wanting to learn more about the subject, which clearly explains the importance of education in non-formal places for the teaching of Astronomy

  6. Movable detector to search for neutrino oscillations in the BNL neutrino beam

    International Nuclear Information System (INIS)

    Bozoki, G.; Fainberg, A.; Weygand, D.; Fagg, L.; Uberall, H.; Goldberg, M.; Meadows, B.; Saenz, A.W.; Seeman, N.

    1980-01-01

    A simple, straightforward, and economic experiment utilizing a set of water Cherenkov counters is proposed to search for neutrino oscillations in the AGS neutrino beam. The detector will be movable and will be able to provide reasonable counting rates up to 2 km downstream of the pion decay tunnel. Whereas previous accelerator experiments have sought to increase the ratio l/p (with l the neutrino path length and p its momentum) by decreasing p, increasing l is suggested instead. Further, by making measurements at several different values of l with the same apparatus, many sources of systematic error are eliminated. The experiment will measure beam-associated muon- and electron-type events at each position. A change in the ratio of muon- to electron-type events as a function of position would be evidence for ν/sub μ/ + ν/sub e/ oscillations. Sensitivity in terms of (Δm) 2 (the square of the mass difference in the mass eigenstates) can be as low as 0.1 eV 2 , for full mixing, which is below the most probable value found by Reines et al for Δm 2 in their electron neutrino reactor experiment. This experiment would be parasitic, running behind the usual neutrino beam experiments, assuming the nominal beam energy (peaked at 1 GeV), and would thus make a minimal demand on AGS support. It is suggested that the first two measurements be made inside the Isabelle tunnel at the points of intersection with the AGS neutrino beam. No further excavations would be required, and the data could be taken before ISA equipment is installed

  7. Mechanical design control and implementation of a new movable diagnostic probe for the TRIUMF cyclotron

    International Nuclear Information System (INIS)

    Ries, T.C.

    1993-11-01

    A new movable probe has been installed into the TRIUMF H - cyclotron. It is intended to measure the distribution of betatron amplitudes, in the vertical plane, of the circulating beam and to scrape halo. The probe, however, may also be scanned in the radial direction. The head may be positioned vertically and horizontally to an accuracy of .002 in. The device is mechanically modular to facilitate fast and easy handling for maintenance in a radioactive area. The beam sensor on the probe head is a 1.25 in. x 3 in. x 0.003 in. tantalum foil and its overall coverage is 3.00 in. X 7.25 in. in a vertical plane orthogonal to, and crossing through the beam orbit plane. Presently its radial centre line location corresponds to a proton beam energy of about 430 MeV at radius 296 in., however, the probe device may be easily relocated to operate from any 4 in. port, and, with an adaptor port flange, may be installed into any port in the cyclotron vacuum tank. A stationary catcher below the probe path collects those electrons stripped from the H - beam and scattered out from the probe head. The probe axis is vertical and the tank aperture is narrow so a worm gear arrangement combined with a modified 'Evans' - parallel linkage mechanism is used to transform vertical rotary motion into horizontal linear motion. The actuators are dc servo motors with tachometers driven by pulse width modulated servo amplifiers. Position sensing is done by variable reluctance type absolute rotary encoders and the higher level positioning is performed by TRIMAC based control software. The precision of movement and jitter was measured in the laboratory. Examples will be given of the probe use with beam. (author). 5 refs., 3 figs

  8. Topographical Hill Shading Map Production Based Tianditu (map World)

    Science.gov (United States)

    Wang, C.; Zha, Z.; Tang, D.; Yang, J.

    2018-04-01

    TIANDITU (Map World) is the public version of National Platform for Common Geospatial Information Service, and the terrain service is an important channel for users on the platform. With the development of TIANDITU, topographical hill shading map production for providing and updating global terrain map on line becomes necessary for the characters of strong intuition, three-dimensional sense and aesthetic effect. As such, the terrain service of TIANDITU focuses on displaying the different scales of topographical data globally. And this paper mainly aims to research the method of topographical hill shading map production globally using DEM (Digital Elevation Model) data between the displaying scales about 1 : 140,000,000 to 1 : 4,000,000, corresponded the display level from 2 to 7 on TIANDITU website.

  9. Quality and Quantity Evaluations of Shade Grown Forages

    Science.gov (United States)

    K. P. Ladyman; M. S. Kerley; R. L. Kallenbach; H. E. Garrett; J. W. Van Sambeek; N. E. Navarrete-Tindall

    2003-01-01

    Seven legumes were grown during the summer-fall of 2000, at the Horticulture and Agroforestry Research Center (39? 01 ' N, 92? 46' W) near New Franklin, MO. The forages were grown in 7.5L white pots placed on light-colored gravel either under full sunlight, 45% sunlight, or 20% sunlight created by a shade cloth over a rectangular frame. Drip irrigation was...

  10. Sun and Shade leaves, SIF, and Photosynthetic Capacity

    Science.gov (United States)

    Berry, J. A.; Badgley, G.

    2016-12-01

    Recent advances in retrieval of solar induced chlorophyll fluorescence (SIF) have opened up new possibilities for remote sensing of canopy physiology and structure. To date most of the emphasis has been placed on SIF as an indicator of stress and photosynthetic capacity. However, it is clear that canopy structure can also have an influence. To this point, simulations of SIF in land surface models tend to under predict observed variation in SIF. Also, large, systematic differences in SIF from different canopy types seem to correlate well with the photosynthetic capacity of these canopies. SIF emissions from pampered crops can be several-fold that from evergreen, needle-leaf forests. Yet, these may have similar vegetation indices and absorb a similar fraction of incident PAR. SIF photons produced in a conifer canopy do have a lower probability of escaping its dense, clumped foliage. However, this does not explain the correlated differences in photosynthetic rate and SIF. It is useful, in this regard, to consider the separate contributions of sun and shade leaves to the SIF emitted by a canopy. Sun leaves tend to be displayed to intercept the direct solar beam, and these highly illuminated leaves are often visible from above the canopy. Sun leaves produce more SIF and a large fraction of it escapes. Therefore, the intensity of SIF may be a sensitive indicator of the partitioning of absorbed PAR to sun and shade leaves. Many models account tor the different photosynthetic capacity of sun and shade leaves in calculating canopy responses. However, the fraction of leaves in each category is usually parameterized by an assumed leaf angle distribution (e.g. spherical). In reality, the sun/shade fraction can vary over a wide range, and it has been difficult to measure. SIF and possibly near-IR reflectance of canopies can be used to specify this key parameter with obvious importance to understanding photosynthetic rate.

  11. Production of tropical forage grasses under different shading levels

    Directory of Open Access Journals (Sweden)

    Francisco Eduardo Torres

    2017-12-01

    Full Text Available This study aimed to evaluate the forage production of three tropical forage grasses under different shading levels. The experiment was conducted in a greenhouse at Universidade Estadual de Mato Grosso do Sul, University Unit of Aquidauana (UEMS/UUA, in a soil classified as Ultisol sandy loam texture. The treatments consisted of three grasses species combinations (B. brizantha cv. Marandu, B. decumbens cv. Basilisck and Panicum maximum cv. Tanzania, submitted to four shading levels (0, 30, 50 and 75%, arranged in a completely randomized blocks design in a factorial 3 x 4, with eight replications. After harvest, the plants were separated into shoot and roots for determination of shoot fresh mass (SFM, shoot dry mass (SDM and roots dry mass production. After analysis of variance, the qualitative factor was subjected to comparison of averages by Tukey’s test, and the quantitative factor to analysis of polynomial regression, being interactions appropriately unfolded. It was verified that B. decumbens, by its linearly increasing production of forage and less decrease of root formation, is the most recommended for shading conditions compared to grasses Tanzania and Marandu.

  12. A comprehensive study on partial shading response of c-Si modules and yield modeling of string inverter and module level power electronics

    NARCIS (Netherlands)

    Sinapis, K.; Tzikas, C.; Litjens, G.; van den Donker, M.; Folkerts, W.; van Sark, W.G.J.H.M.; Smets, A.

    2016-01-01

    Building Integrated and Building Attached Photovoltaic (BIPV, BAPV) systems may suffer from lower performance than predicted as a result of not considered partial shading. New system architectures have been proposed to optimize performance. The common approach of these new architectures is to track

  13. Effect of abutment shade, ceramic thickness, and coping type on the final shade of zirconia all-ceramic restorations: in vitro study of color masking ability.

    Science.gov (United States)

    Oh, Seon-Hee; Kim, Seok-Gyu

    2015-10-01

    The aim of the study was to evaluate the effect of abutment shade, ceramic thickness, and coping type on the final shade of zirconia all-ceramic restorations. Three different types of disk-shaped zirconia coping specimens (Lava, Cercon, Zirkonzahn: ø10 mm × 0.4 mm) were fabricated and veneered with IPS e.max Press Ceram (shade A2), for total thicknesses of 1 and 1.5 mm. A total of sixty zirconia restoration specimens were divided into six groups based on their coping types and thicknesses. The abutment specimens (ø10 mm × 7 mm) were prepared with gold alloy, base metal (nickel-chromium) alloy, and four different shades (A1, A2, A3, A4) of composite resins. The average L*, a*, b* values of the zirconia specimens on the six abutment specimens were measured with a dental colorimeter, and the statistical significance in the effects of three variables was analyzed by using repeated measures analysis of variance (α=.05).The average shade difference (ΔE) values of the zirconia specimens between the A2 composite resin abutment and other abutments were also evaluated. The effects of zirconia specimen thickness (Pabutment shade (Pabutments was higher (close to the acceptability threshold of 5.5 ΔE) than th ose between the A2 composite resin and other abutments. This in-vitro study demonstrated that abutment shade, ceramic thickness, and coping type affected the resulting shade of zirconia restorations.

  14. Determination of the Annual Shading Potential of Salix Purpurea Coppice using Hemispherical Photographs

    Science.gov (United States)

    Holzapfel, G.; Weihs, P.; Stockreiter, L.; Hoffmann, E.

    2012-04-01

    The European Water Framework Directive (WFD) aims to achieve a good ecological potential and good surface water chemical status for all surface waters. Widely constant shading with riparian vegetation is the potential natural plant cover condition and plays a key role by the implementation of the WFD. The shading effect of vegetation is considered to be particularly relevant for small and medium sized rivers with slow flow velocity. Soil Bioengineering measures effect technical (e.g. soil protection), ecological and socio-economical issues on river systems. Positive ecological effects are based on the development of the used plants and result among others in shading of the water body. Natural bank vegetation provides very important niches for terrestrial and aquatic stages and reduces the incident solar radiation up to 95%. Consequently large riparian wooded areas form a microclimate that leads to a decrease of water temperature or prevent an increase. They even reduce evaporation and increase the relative air humidity which contributes to reducing water temperature and enlarges the oxygen uptake capacity. Accordingly the daily variations of temperature and those of oxygen content are definitely lower in vegetated areas. This issue is especially important considering climate change scenarios with increasing water temperatures. From an ecological point of view it is essential to quantify the processes. There are different ways to characterize densities of vegetation. Most of them - such as the method by Braun-Blanquet and Londo - rely on estimations of the dominance of species. Applying this kind of procedures on riparian vegetation result in uncertainties due to the strong variations in height and densities. Hemispherical photographs are a standardized method in forest ecology under more or less uniform forest stand conditions. However it is now hardly used for riparian vegetation stands. Questions that will be addressed are the determination of annual stand

  15. Behavioral ecology of Heteragrion consors Hagen (Odonata, Megapodagrionidae: a shade-seek Atlantic forest damselfly

    Directory of Open Access Journals (Sweden)

    Geovanni Ribeiro Loiola

    2011-09-01

    Full Text Available Behavioral ecology of Heteragrion consors Hagen (Odonata: Megapodagrionidae: a shade-seek Atlantic forest damselfly. The intensity of the inter and intra-sexual selection can affect male behavioral traits as territorial fidelity and aggressiveness allowing the existence of different strategies. However, its differential success could be affected by environmental - as the diel variation in temperature - and physiological constrains - as the variation in thermoregulatory abilities. In this context, we present a behavioral analysis of Heteragrion consors (Zygoptera, Megapodagrionidae trying to characterize its mating system, diel activity pattern, temporal budget, territoriality and reproductive biology. These data were obtained based on field observations using the focal individual method and mark-recapture techniques in 120 m of a shaded Atlantic Forest stream in Brazil. The males of this species were territorial, varying in its local fidelity, while the females appear sporadically. Males were perched in the majority of the time, but were also observed in cleaning movements, longitudinal abdominal flexion, wing flexion and sperm transfer during perch. The males presented a perched thermoregulatory behavior related to an exothermic regulation. Foraging and agonistic interactions were rare, but dominate the other behavioral activities. Abdominal movements associated to long lasting copula pointed to the existence of sperm competition in this species. Males performed contact post-copulatory guarding of the females. These observations pointed to a non-resource mating system for this species.

  16. Shaded Relief Images for Cartographic Applications.

    Science.gov (United States)

    1981-04-01

    TR~ADITIONAL ALGEBRAIC COORDINATE SYSTEM. SINCE C ULt< X-i CUFUINAIL Si5 lEM HAS bEEN ROTATED, C SA A1i.U Sf MUSI bE kUlAIL) dACK bE~dJHE PETUHNINUo... MUSI 13L HUTAILD BACK( BEfO)RE RET’URNING C TU THE MAIN ROUTINE. C SECTUR I CASE 0013 IF’(C.GTf.(C1). OR .S.LTs(SI))G0 TU 10 0U14 SX=-C*CUSE[! 0015

  17. Role of riparian shade on the fish assemblage of a reservoir littoral

    Science.gov (United States)

    Raines, C. D.; Miranda, Leandro E.

    2016-01-01

    Research into the effects of shade on reservoir fish assemblages is lacking, with most investigations focused on streams. Unlike many streams, the canopy in a reservoir shades only a narrow fringe of water adjacent to the shoreline, and may not have the influential effect on the aquatic environment reported in streams. We compared fish assemblages between shaded and unshaded sites in a shallow reservoir. Overall species richness (gamma diversity) was higher in shaded sites, and fish assemblage composition differed between shaded and unshaded sites. Average light intensity was 66 % lower in shaded sites, and differences in average temperature and dissolved oxygen were small. Unlike streams where shade can have large effects on water physicochemistry, in reservoirs shade-related differences in fish assemblages seemed to be linked principally to differences in light intensity. Diversity in light intensity in shaded and unshaded sites in reservoirs can create various mosaics of light-based habitats that enable diversity of species assemblages. Managing to promote the habitat diversity provided by shade may require coping with the artificial nature of reservoir riparian zones and water level fluctuations.

  18. Using Google Earth to Assess Shade for Sun Protection in Urban Recreation Spaces: Methods and Results.

    Science.gov (United States)

    Gage, R; Wilson, N; Signal, L; Barr, M; Mackay, C; Reeder, A; Thomson, G

    2018-05-16

    Shade in public spaces can lower the risk of and sun burning and skin cancer. However, existing methods of auditing shade require travel between sites, and sunny weather conditions. This study aimed to evaluate the feasibility of free computer software-Google Earth-for assessing shade in urban open spaces. A shade projection method was developed that uses Google Earth street view and aerial images to estimate shade at solar noon on the summer solstice, irrespective of the date of image capture. Three researchers used the method to separately estimate shade cover over pre-defined activity areas in a sample of 45 New Zealand urban open spaces, including 24 playgrounds, 12 beaches and 9 outdoor pools. Outcome measures included method accuracy (assessed by comparison with a subsample of field observations of 10 of the settings) and inter-rater reliability. Of the 164 activity areas identified in the 45 settings, most (83%) had no shade cover. The method identified most activity areas in playgrounds (85%) and beaches (93%) and was accurate for assessing shade over these areas (predictive values of 100%). Only 8% of activity areas at outdoor pools were identified, due to a lack of street view images. Reliability for shade cover estimates was excellent (intraclass correlation coefficient of 0.97, 95% CI 0.97-0.98). Google Earth appears to be a reasonably accurate and reliable and shade audit tool for playgrounds and beaches. The findings are relevant for programmes focused on supporting the development of healthy urban open spaces.

  19. Modeling of solar transmission through multilayer glazing facade using shading blinds with arbitrary geometrical and surface optical properties

    International Nuclear Information System (INIS)

    Luo, Yongqiang; Zhang, Ling; Wu, Jing; Wang, Xiliang; Liu, Zhongbing; Wu, Zhenghong

    2017-01-01

    A system model that can accurately simulate the instantaneous solar transmittance through multilayer glazing façade (MGF) and shading device can provide a solid foundation for the thermal and daylighting performance calculation of MGF as well as indoor visual comfort evaluation. Traditional optical models for venetian blind and glazing façade meet with their limitations to analyze new prototype of shading blind like photovoltaic (PV) blind which has quite different surface optical properties compared with conventional venetian blind. The present study proposed a new system model for MGF using shading blind with arbitrary geometrical and optical features which is suitable for a wide range of applications. Three major calculation types for modeling of shading blinds cover all the possible situations in application. Guess Integer-Valued Function is adopted for delivering a general description on direct radiation transport. The direct-direct, direct-diffuse and diffuse-diffuse radiation transports are separately considered. A series of experiments were carried out to validate the model under various parameter settings and different weather conditions. Parametric study revealed some new findings in the evaluations of influence of ambient radiation situations, geometrical and optical features of blind space on both solar transmittance and solar absorption by blind layer. - Highlights: • Solar transport through glazing façades with PV blind with arbitrary geometry is simulated. • Ray-tracing and radiosity method are coupled in calculation. • Guess Integer-Valued Function is used in calculation of direct radiation transport. • Experiment and simulated data are compared for model validation. • Parametric study is conducted for evaluating the impact of different factors on the system.

  20. Adjustable movable capacitors bank at 20 or 30 MVAr in 115 kV; Banco movil de capacitores ajustable a 20 o 30 MVAr en 115 kV

    Energy Technology Data Exchange (ETDEWEB)

    Ponce Velez, Marco A; Lopez Velazquez, Juan Jose [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Lopez Tagle, Alfredo; Aragon Garcia, Hector [Comision Federal de Electricidad (Mexico)

    1999-07-01

    The use of fixed capacitors banks in distribution and transmission systems is a useful tool to compensate the demand of reactive power and the drop of voltage of the power lines. Nevertheless, unforeseen happenings can be originated that could cause decompensation in the system reliability. Due to the previous fact, the Transmission and Transformation Coordinator (CTT) of the Comision Federal de Electricidad (CFE) asked for the design and the construction of a movable bank of capacitors for an emergent compensation of reactive power. In this article it is presented the most relevant of the design, the construction and the operation of the movable bank of capacitors developed in the Instituto de Investigaciones Electricas (IIE). [Spanish] El empleo de bancos capacitadores fijos en los sistemas de distribucion y transmision es una herramienta util para compensar la demanda de reactivos y la caida de tension de las lineas. Sin embargo, se pueden originar imprevistos que descompensan la confiabilidad del sistema. Debido a lo anterior, la Coordinadora de Transmision y Transformacion (CTT) de la Comision Federal de Electricidad (CFE) solicito el diseno y la construccion de un banco movil de capacitores para una compensacion emergente de potencia reactiva. En este articulo se presenta lo mas relevante del diseno, la construccion y la operacion del banco movil de capacitores desarrollado en el Instituto de Investigaciones Electricas (IIE).

  1. Crash energy management on the base of Movable cellular automata method

    Science.gov (United States)

    Psakhie, Serguei; Dmitriev, Andrei; Shilko, Evgueni; Tatarintsev, Evgueni; Korostelev, Serguei

    2001-06-01

    One of the main problems of materials science is increasing of structure's viability under dynamic loading. In general, a solution is the management of transformation of the energy of loading to the energy of destroying of the least important parts and details of the structure. It has to be noted that similar problem also exists in materials science, since a majority of modern materials are heterogeneous and have a complex internal structure. To optimize this structure for working under dynamic loading it is necessary to take into account the redistribution of elastic energy including phase transformation, generation and accumulation of micro-damages, etc. As far as real experiments on destroying the complex objects are sufficiently expensive and getting of detailed information is often associates with essential difficulties, the methods of computer modeling are used in solving the similar problems. As a rule, these are the methods of continuum mechanics. Although essential achievements have been obtained on the basis of these methods the continuum approach has several limitations, connected first of all with the possibility of description of generation of damages, formation and development of cracks and mass mixing effects. These problems may be solved on the basis of the Movable Cellular Automata (MCA) method, which has been successfully used for modeling fracture of the different material and structures In the paper behavior and peculiarities of failure of complex structures and materials under dynamic loading are studied on the basis of computer modeling. The results shown that sometimes even small changes of the internal structure leads to the significant increasing of the viability of the complex structures and materials. It is due to the elastic energy flux change over during the dynamical loading. This effect may be explained by the fact that elastic energy fluxes define the current stress concentration. Namely, because the area of inclusions are subjected

  2. Analysis of Selected Photovoltaic Panels Operating Parameters as a Function of Partial Shading and Intensity of Reflected Radiation

    Directory of Open Access Journals (Sweden)

    Bilčík Matúš

    2018-03-01

    Full Text Available Due to expansion of utilisation of photovoltaics in ordinary households, the question arises how this phenomenon affects the electric power of photovoltaic modules. The article deals with the electric power analysis of photovoltaic modules as a function of two very important factors. The first examined factor was partial shading, and the second factor was the intensity of reflected radiation. In order to determine the dependence of module power on the aforementioned parameters, a measurement system under laboratory conditions has been prepared. For identification of the reflected radiation effect on the power of the photovoltaic module, a series of measurements was performed on 7 different surfaces with the same radiation source. It is evident from obtained experimental result that the ratio of reflected irradiation on the solar module power is 1.29%. By simulation of partial shading of photovoltaic module, the decrease of 86.15% in its output power was identified.

  3. Study of technical and economical feasibility for implementation of a movable unit for treatment of industrial effluents with electron beam

    International Nuclear Information System (INIS)

    Rela, Carolina Sciamarelli

    2006-01-01

    The treatment of industrial effluents is a practice that is disseminating in accelerated rhythm, of contributing to reinforce the public image, through the combat of the pollution, it brings economical advantages allowing the companies the reuse of the treated water in their own processes. The liquid effluent treatment technique studied in the present work is the one that uses the chemical oxidation/reduction standing out the use of the electron beam (e.b.) radiation. This technique uses an advanced oxidation process, generating radicals highly reagents that provoke the oxidation, reduction, dissociation and degradation in composed organic and exercising lethal effect in general in the microorganisms and parasites. In this work a conceptual and basic project of a movable unit of effluents treatment using electron beam radiation process was developed, in order that the unit moves until the treatment point, where the effluent is produced, facilitating the logistics. A technical and economical feasibility study was also elaborated allowing data on the capacity and cost of effluents processing to consolidate the values of the necessary investments to be presented to foundations organs for the construction of a movable unit. The results of the studies demonstrated that it is technically viable attending the pertinent legislation of Brazil, in the aspects of Radiation Protection and transport limit capacity. The unitary cost of the e.b. radiation processing in the movable unit was shown more expensive than in the fixed unit, the reason is the decrease of the efficiency of the interaction of the incident electrons in the effluent, due to the reduction of electron energy operation time of the unit. (author)

  4. Performance of free-range chickens reared in production modules enriched with shade net and perches

    Directory of Open Access Journals (Sweden)

    MJB Santos

    2014-03-01

    Full Text Available An experiment was carried out to evaluate the effect of environmental enrichment in a free-range chicken production system on live performance as a function of microclimate, physiological parameters, and performance parameters. Four production modules were divided into four pens with 10 birds each, totaling 60 birds. The following treatments were applied: access to a paddock (TEST, access to a paddock with perches (PER, access to a paddock with artificial shade (SHA, and access to the paddock with perches and artificial shade (PESH. The PESH production module presented the best globe temperature (Tbg,ºC and enthalpy (h, kJ/kg, and thereby, the best thermal environmental conditions, which ensured the longest permanence time of the birds in the paddock. The SHA and PESH modules promoted the lowest respiratory rate and shank and comb temperatures. Live performance was influenced by the presence of environmental enrichment (modules SHA and PESH, with the highest live weight (LW and weight gain (WG and the lowest feed conversion ratio (FCR and metabolizable energy intake (MEI. Parts yield, such as giblets, were not influenced by production modules, except for PESH, which promoted higher offal weight. In general, chickens reared in enriched production modules presented greatest performance and comfort results and were considered close to optimal rearing conditions.

  5. A Differential Evolution Based MPPT Method for Photovoltaic Modules under Partial Shading Conditions

    Directory of Open Access Journals (Sweden)

    Kok Soon Tey

    2014-01-01

    Full Text Available Partially shaded photovoltaic (PV modules have multiple peaks in the power-voltage (P-V characteristic curve and conventional maximum power point tracking (MPPT algorithm, such as perturbation and observation (P&O, which is unable to track the global maximum power point (GMPP accurately due to its localized search space. Therefore, this paper proposes a differential evolution (DE based optimization algorithm to provide the globalized search space to track the GMPP. The direction of mutation in the DE algorithm is modified to ensure that the mutation always converges to the best solution among all the particles in the generation. This helps to provide the rapid convergence of the algorithm. Simulation of the proposed PV system is carried out in PSIM and the results are compared to P&O algorithm. In the hardware implementation, a high step-up DC-DC converter is employed to verify the proposed algorithm experimentally on partial shading conditions, load variation, and solar intensity variation. The experimental results show that the proposed algorithm is able to converge to the GMPP within 1.2 seconds with higher efficiency than P&O.

  6. SUNLIT AND SHADED MAIZE CANOPY WATER LOSS UNDER VARIED WATER STRESS

    Directory of Open Access Journals (Sweden)

    Antonio Odair Santos

    1999-12-01

    Full Text Available ABSTRACT The precise estimation of transpiration from plant canopies is important for the monitoring of crop water use and management of many agricultural operations related to water use planning. The aim of this study was to estimate transpiration from sunlit and shaded fractions of a maize ( Zea mays L. canopy, using the Penman-Monteith energy balance equation with modifications introduced by Fuchs et al. (1987 and Fuchs & Cohen (1989. Estimated values were validated by a heat pulse system, which was used to measure stem sap flow and by a weighing lysimeter. A relationship between incident radiation and leaf stomatal conductance for critical levels of leaf water potential was used to estimate transpiration. Results showed that computed transpiration of the shaded canopy ranged from 27 to 45% of the total transpiration when fluctuations in atmospheric demand and the level of water stress were taken in account. Hourly and daily estimates of transpiration showed agreement with lysimeter and heat pulse measurements on the well-watered plots. For the water-limited plots the precision of the estimate decreased due to difficulties in simulating the canopy stomatal conductance.

  7. Which offers more scope to suppress river phytoplankton blooms: reducing nutrient pollution or riparian shading?

    Science.gov (United States)

    Hutchins, M G; Johnson, A C; Deflandre-Vlandas, A; Comber, S; Posen, P; Boorman, D

    2010-10-01

    River flow and quality data, including chlorophyll-a as a surrogate for river phytoplankton biomass, were collated for the River Ouse catchment in NE England, which according to established criteria is a largely unpolluted network. Against these data, a daily river quality model (QUESTOR) was setup and successfully tested. Following a review, a river quality classification scheme based on phytoplankton biomass was proposed. Based on climate change predictions the model indicated that a shift from present day oligotrophic/mesotrophic conditions to a mesotrophic/eutrophic system could occur by 2080. Management options were evaluated to mitigate against this predicted decline in quality. Reducing nutrient pollution was found to be less effective at suppressing phytoplankton growth than the less costly option of establishing riparian shading. In the Swale tributary, ongoing efforts to reduce phosphorus loads in sewage treatment works will only reduce peak (95th percentile) phytoplankton by 11%, whereas a reduction of 44% is possible if riparian tree cover is also implemented. Likewise, in the Ure, whilst reducing nitrate loads by curtailing agriculture in the headwaters may bring about a 10% reduction, riparian shading would instead reduce levels by 47%. Such modelling studies are somewhat limited by insufficient field data but offer a potentially very valuable tool to assess the most cost-effective methods of tackling effects of eutrophication. Copyright 2010 Elsevier B.V. All rights reserved.

  8. Solar Heat Gain Reduction of Ventilated Double Skin Windows without a Shading Device

    Directory of Open Access Journals (Sweden)

    Bokyoung Koo

    2017-12-01

    Full Text Available With global efforts to strengthen various energy-saving policies for buildings to reduce greenhouse gas emissions, in South Korea, new laws and regulations have been in force since May 2015 to install shading devices in public buildings and to include the solar heat gain coefficient (SHGC reduction performance of shading devices in the evaluation of building performance. By making a ventilated air layer outer glass and inner glass to lower the temperatures of the air layer and glass surface, it is possible to reduce the amount of heat flowing into the building while maintaining the same level of light transmission as plain window systems. This study proposes a double-skin façade window with a 20 mm ventilated air cavity, and assumes that insolation inflow indoors would be reduced through ventilation in the air cavity. The artificial solar lab test results show that the SHGC can be lowered through ventilation by 28% to 52.9%. Additionally, in an outdoor test cell experiment, the results show that the mean temperature was 0.6 K and the peak temperature was 0.9 K lower with ventilation in the air cavity than that without ventilation in the air cavity.

  9. The research and development of inclination angle magnetic fluid detector with a movable sensing element based on permanent magnets

    Energy Technology Data Exchange (ETDEWEB)

    Lagutkina, D.Yu., E-mail: Lagutkina_D@mail.ru; Saikin, M.S., E-mail: saikinms@mail.ru

    2017-06-01

    The article presents an account on some new designs, which have been developed for the magnetic fluid sensor with a movable sensor based on permanent magnets with the support of Ivanovo State Power Engineering University. The research carried out is aimed at elucidating the influence of the detector sensing element on its operating performance. - Highlights: • In order to conduct a careful research of IAMFD designs operating performance the algorithm was applied to look into the SE suspension force dependencies on its spatial position. • According to this algorithm, the value of the sensitive element suspension force is obtained with use of the MF attraction force of the to the permanent magnet.

  10. Effects of shading on dry matter partitioning and yield of field-grown sunflower

    International Nuclear Information System (INIS)

    Villalobos, F.J.; Soriano, A.; Fereres, E.

    1992-01-01

    Crop simulation models require quantitative descriptions of the effects of irradiance on dry matter partition and yield. The objective of this work was to quantify the effects of reduced radiation intensity during different phenological stages on the growth, dry matter partitioning and grain numbers of sunflower (Helianthus annuus, L.). A field experiment was carried out in 1990 with 50 per cent shading treatments. The earliest treatment began at crop emergence while the latest ended at first anthesis. Shading had little effect on plant leaf area growth but reduced biomass and yield. The dry matter: radiation quotient and specific leaf area increased with shading. Grain number per head was decreased by shading, with the greatest effect occurring when shading was applied prior to anthesis. All shading treatments increased dry matter partitioning to stems, decreased assimilate partitioning to the heads and had no effect on the partitioning to leaves. (author)

  11. Effects of shading time on quality of matcha and matcha cake

    Directory of Open Access Journals (Sweden)

    LI Hui

    2014-12-01

    Full Text Available Effects of shading time on the quality of Matcha and the Matcha cake.It showed that shading could help the systhesis of nitrogen compounds such as amino acids,caffeine chlorophyll and protein,but couldn′t favor accumulation of tea polyphenol and polysaccharides.The more shading time was,the more chlorophyll content would be,and the more green of Matcha color would be.After Matcha cake was baked,the green color reduced.The colors of Macha cake are greener with longer shading time.Thus,the length of Shading time has obvious effect on the green tea and the tea cake quality,We can adjust the Matcha cake taste,flavor and color by adding Matcha from different shading time.

  12. Experimental and Simulation for the Effect of Partial Shading on Solar Panel Performance

    Directory of Open Access Journals (Sweden)

    Emad Talib Hahsim

    2016-06-01

    Full Text Available Partial shading is one of the problems that affects the power production and the efficiency of photovoltaic module. A series of experimental work have been done of partial shading of monocrystalline PV module; 50W, Isc: 3.1A, Voc: 22V with 36 cells in series is achieved. Non-linear power output responses of the module are observed by applying various cases of partial shading (vertical and horizontal shading of solar cells in the module. Shading a single cell (corner cell has the greatest impact on output energy. Horizontal shading or vertical shading reduced the power from 41W to 18W at constant solar radiation 1000W/m2 and steady state condition. Vertical blocking a column of cells (9 cells in a module reduces the power from 41W to 18W (53% power reduction; while, blocking one or two cell in the row reduces the power from 41 W to 18W (53% power reduction. Shading three or four cells in the same row reduces the power from 41W to 1W or 0.006W (94% power reduction. A complete Matlab / Simulink model are achieved to simulate the effect of partial shading on power output of module. It is found that shading a single cell reduces the power from 50 W to 25 W (50% using Matlab/Simulink model. Comparisons have been made between the I-V and P-V characteristic curves from the simulation with the practical (experimental curves. The results showed that the percentage of error between the Simulink results and the corresponding experimental measurement are 22% without shading effect and, 32% with partial shading.

  13. Satisfaction of Dental Students, Faculty, and Patients with Tooth Shade-Matching Using a Spectrophotometer.

    Science.gov (United States)

    Ballard, Erin; Metz, Michael J; Harris, Bryan T; Metz, Cynthia J; Chou, Jang-Ching; Morton, Dean; Lin, Wei-Shao

    2017-05-01

    The aims of this study were to evaluate dental students' clinical shade-matching outcomes (from subjective use of shade guide) with an objective electronic shade-matching tool (spectrophotometer); to assess patients', students', and supervising faculty members' satisfaction with the clinical shade-matching outcomes; and to assess clinicians' support for use of the spectrophotometer to improve esthetic outcomes. A total of 103 volunteer groups, each consisting of patient, dental student, and supervising faculty member at the University of Louisville, were recruited to participate in the study in 2015. Using the spectrophotometer, clinical shade-matching outcome (ΔE clinical ) and laboratory shade-matching outcome (ΔE laboratory ) were calculated. Two five-point survey items were used to assess the groups' satisfaction with the clinical shade-matching outcome and support for an objective electronic shade-matching tool in the student clinic. The results showed that both ΔE clinical (6.5±2.4) and ΔE laboratory (4.3±2.0) were outside the clinical acceptability threshold ΔE values of 2.7, when visual shade-matching method (subjective usage of shade guide) was used to fabricate definitive restorations. Characteristics of the patients, dental students, supervising faculty members, and restorations had minimal to no effect on the ΔE clinical The patients, dental students, and supervising faculty members generally had positive opinions about the clinical shade-matching outcome, despite the increased ΔE clinical observed. Overall, clinical shade-matching outcomes in this school need further improvement, but the patients' positive opinions may indicate the need to revisit the acceptability threshold ΔE value of 2.7 in the academic setting.

  14. Effects of shade on growth, production and quality of coffee (Coffea arabica) in Ethiopia

    OpenAIRE

    Bote, A.D.; Struik, P.C.

    2011-01-01

    The research work was conducted to evaluate the effect of shade on growth and production of coffee plants. To achieve this, growth and productivity of coffee plants growing under shade trees were compared with those of coffee plants growing under direct sun light. Different physiological, environmental and quality parameters were assessed for both treatments. Shade trees protected coffee plants against adverse environmental stresses such as high soil temperatures and low relative humidity. Sh...

  15. Experimental study of the effect of fully shading on the Solar PV module performance

    Science.gov (United States)

    Al-chaderchi, Monadhil; Sopain, K.; Alghoul, M. A.; Salameh, T.

    2017-11-01

    Experimental tests were performed to study the effects of shading for different string inside the photovoltaic (PV) panels, power equipped with different number of diodes from the same manufacturer as of solar panel. The IV curve for all cases were recorded to see how the bypass diodes will reduce the effects of shading .The case for 3 by pass diode show the best performance of solar PV module under shading phenomena.

  16. VALIDATING the Accuracy of Sighten's Automated Shading Tool

    Energy Technology Data Exchange (ETDEWEB)

    2018-05-04

    Solar companies - including installers, financiers, and distributors - leverage Sighten software to deliver accurate shading calculations and solar proposals. Sighten recently partnered with Google Project Sunroof to provide automated remote shading analysis directly within the Sighten platform. The National Renewable Energy Laboratory (NREL), in partnership with Sighten, independently verified the accuracy of Sighten's remote-shading solar access values (SAVs) on an annual basis for locations in Los Angeles, California, and Denver, Colorado.

  17. Woody plant diversity and structure of shade-grown-coffee plantations in Northern Chiapas, Mexico

    Directory of Open Access Journals (Sweden)

    Lorena Soto-Pinto

    2001-12-01

    Full Text Available Shade-grown coffee is an agricultural system that contains some forest-like characteristics. However, structure and diversity are poorly known in shade coffee systems. In 61 coffee-growers’ plots of Chiapas, Mexico, structural variables of shade vegetation and coffee yields were measured, recording species and their use. Coffee stands had five vegetation strata. Seventy seven woody species mostly used as wood were found (mean density 371.4 trees per hectare. Ninety percent were native species (40% of the local flora, the remaining were introduced species, mainly fruit trees/shrubs. Diametric distribution resembles that of a secondary forest. Principal Coordinates Analysis grouped plots in four classes by the presence of Inga, however the majority of plots are diverse. There was no difference in equitability among groups or coffee yields. Coffee yield was 835 g clean coffee per shrub, or ca. 1668 kg ha-1. There is a significant role of shade-grown coffee as diversity refuge for woody plants and presumably associated fauna, as well as an opportunity for shade-coffee growers to participate in the new biodiversity-friendly-coffee marketEl café bajo sombra es un sistema agrícola que contiene algunas características de los bosques. Sin embargo, las características estructurales y de diversidad de la sombra del café son poco conocidas. En 61 parcelas de productores del norte de Chiapas, Mexico, se midieron variables estructurales de la vegetación de sombra y los rendimientos de café, registrando las especies y sus usos. Los cafetales presentaron cinco estratos de vegetación. Se encontraron 77 especies leñosas, la mayoría de uso maderable (densidad promedio de 371.4 árboles por hectárea. Noventa por ciento fueron especies nativas (40% de la flora local, el porcentaje restante fueron especies introducidas, principalmente árboles o arbustos frutales. La distribución diamétrica se asemeja a la distribución típica de bosques secundarios

  18. Dental Shade Guide Variability for Hues B, C, and D Using Cross-Polarized Photography.

    Science.gov (United States)

    Sampaio, Camila S; Gurrea, Jon; Gurrea, Marta; Bruguera, August; Atria, Pablo J; Janal, Malvin; Bonfante, Estevam A; Coelho, Paulo G; Hirata, Ronaldo

    2018-04-20

    This study evaluated the color variability of hues B, C, and D between the VITA Classical shade guide (Vita Zahnfabrik) and four other VITA-coded ceramic shade guides using a digital camera (Canon EOS 60D) and computer software (Adobe Photoshop CC). A cross-polarizing filter was used to standardize external light sources influencing color match. A total of 275 pictures were taken, 5 per shade tab, for 11 shades (B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, and D4), from the following shade guides: VITA Classical (control); IPS e.max Ceram (Ivoclar Vivadent); IPS d.SIGN (Ivoclar Vivadent); Initial ZI (GC); and Creation CC (Creation Willi Geller). Pictures were evaluated using Adobe Photoshop CC for standardization of hue, chroma, and value between shade tabs. The VITA-coded shade guides evaluated here showed an overall unmatched shade in all their tabs when compared to the control, suggesting that shade selection should be made with the corresponding manufacturer guide of the ceramic intended for the final restoration.

  19. Shading effect on generative characters of upland red rice of Southeast Sulawesi, Indonesia

    Science.gov (United States)

    Muhidin; Syam’un, E.; Kaimuddin; Musa, Y.; Sadimantara, G. R.; Usman; Leomo, S.; Rakian, T. C.

    2018-05-01

    Upland red rice (Oryza sativa) contains anthocyanin, a phenolic compounds that can act as antioxidants and functional food for human dietary. The content of functional food on upland red rice is influenced by shading condition, but the production is also influenced by environmental condition, especially the availability of light. The study aims is to assess and analyze the effect of shade on the growth and production of upland red rice. The research was conducted using the quantitative method to obtain the optimal shading condition that can increase the rice anthocyanin content and relatively high production. The research was arranged in split plot design, with shade as main plot and the different of cultivar as sub plot with three replications. The shading treatment consist of 4 levels as follows: n1=shade level 75%. The cultivar tested were (v1) = Labandiri, (v2) = Jangkobembe, (v3) = Ranggohitam, and (v4) = Paedara. The rice planted in between teak wood trees with different age and level of canopy. The research reveals that shades had an effect in decreasing plant production (the higher level of shade, the higher the decrease level of production), but the shades can improve the quality of red rice through the increase of anthocyanin content.

  20. Daylighting performance evaluation of a bottom-up motorized roller shade

    Energy Technology Data Exchange (ETDEWEB)

    Kapsis, K.; Athienitis, A.K.; Zmeureanu, R.G. [Department of Building, Civil and Environmental Engineering, Concordia University, Montreal, QC (Canada); Tzempelikos, A. [School of Civil Engineering, Purdue University, West Lafayette, IN (United States)

    2010-12-15

    This paper presents an experimental and simulation study for quantifying the daylighting performance of bottom-up roller shades installed in office spaces. The bottom-up shade is a motorized roller shade that opens from top to bottom operating in the opposite direction of a conventional roller shade, so as to cover the bottom part of the window, while allowing daylight to enter from the top part of the window, reaching deeper into the room. A daylighting simulation model, validated with full-scale experiments, was developed in order to establish correlations between the shade position, outdoor illuminance and work plane illuminance for different outdoor conditions. Then, a shading control algorithm was developed for application in any location and orientation. The validated model was employed for a sensitivity analysis of the impact of shade optical properties and control on the potential energy savings due to the use of daylighting. The results showed that Daylight Autonomy for the bottom-up shade is 8-58% higher compared to a conventional roller shade, with a difference of 46% further away from the facade, where the use of electric lighting is needed most of the time. The potential reduction in energy consumption for lighting is 21-41%. (author)

  1. IUSThrust Vector Control (TVC) servo system

    Science.gov (United States)

    Conner, G. E.

    1979-01-01

    The IUS TVC SERVO SYSTEM which consists of four electrically redundant electromechanical actuators, four potentiometer assemblies, and two controllers to provide movable nozzle control on both IUS solid rocket motors is developed. An overview of the more severe IUS TVC servo system design requirements, the system and component designs, and test data acquired on a preliminary development unit is presented. Attention is focused on the unique methods of sensing movable nozzle position and providing for redundant position locks.

  2. Movable scour protection. CFD calculation of flow and scour around foundation

    Energy Technology Data Exchange (ETDEWEB)

    Miller, R.

    2002-07-01

    In the design of scour protections a basic parameter is the variation of the bed shear stress around the structure and the potential of the flow for using the stones of the scour protection. This report investigates whether it is: 1. Possible to calculate the correct bed shear stress for various wave and current situations at the base of the foundations, 2. Possible to calculate the scour depths with and without scour protection or in the case of movable scour protection. A number of test runs were made with the Elypsos computer code with the added morphological module (=sediment transport module). It turned out that it is possible to make such calculations but they are extremely time consuming on even a large computer for a simple structure like the circular foundation. It turns out that the computations overpredict the scour depth somewhat. Therefore a more practical approach was made. The morphological model was taken out. Instead the distribution of bottom shear stress distribution around the base of the structure was calculated. This is the important parameter for designing the armour layer of the scour protection. The Shields criterion was used for predicting stable stones and a suitable high value of the shear stress is used. The high bottom shear stress appears for a horizontal bottom. If the sea bottom is allowed to deepen in the areas with maximum shear stress amplification the horseshoe eddy is weakened. This again reduces the shear stress amplification. The computer program was used to perform such calculations and it turned out to be a powerful tool for this. The shear stress amplification can be reduced with a factor 2. Interactively, it is thus possible to calculate the form of a scour hole by trial and error. The scour protection surface shape with the smallest amplification of the shear stress and with the shear stress below the critical Shields Parameter is the optimum scour protection. The program can be used interactively to calculate the extent

  3. Evaluation of Cellular Shades in the PNNL Lab Homes

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, Joseph M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sullivan, Greg [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cort, Katherine A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Metzger, Cheryn E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Merzouk, Massine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-11-01

    This report examines the energy performance of cellular shade window coverings in a matched pair of all-electric, factory-built “Lab Homes” located on the Pacific Northwest National Laboratory (PNNL) campus in Richland, Washington. The 1500-square-foot homes were identical in construction and baseline performance, which allowed any difference in energy and thermal performance between the baseline home and the experimental home to be attributed to the retrofit technology installed in the experimental home. To assess the performance of high efficiency window attachments in a residential retrofit application, the building shell air leakage, energy use, and interior temperatures of each home were compared during the 2015 -2016 winter heating and summer cooling seasons. Hunter Douglas Duette® Architella® Trielle™ opaque honeycomb “cellular” shades were installed over double-pane clear-glass, aluminum-frame primary windows in the experimental home and were compared to identical primary windows with no window coverings and with standard typical white vinyl horizontal blind window coverings in the baseline home.

  4. Effects of shading on relative competitive advantage of three species of Sphagnum

    Directory of Open Access Journals (Sweden)

    J.Z. Ma

    2015-06-01

    Full Text Available (1 Sphagnum is an important genus of bryophytes holding 10–15 % of the terrestrial carbon stock. With climate change a drier surface may increase the abundance of vascular plants on peatlands, so shading of Sphagnum may increase. Here we describe growth cabinet experiments to reveal the effects of shading on interactions among mixtures of three species: S. capillifolium, S. palustre (hummock species, and S. fallax (a hollow species. We measured the six traits: growth in length, growth as increase in dry mass, side-shoot production, nitrogen and carbon proportion of the capitulum dry mass, and C:N ratio in the capitulum. (2 Shading had no effect on biomass production or side-shoot production but increased height increment in all three species. It also increased the C and N proportions of total dry mass but decreased C:N ratio in the capitula. (3 Neighbours of a different species reduced biomass and side-shoot production in the two hummock species but had no effect on the hollow species. (4 All three species showed interaction between shading and neighbour in two or more plant traits. S. fallax showed competitive advantage over S. palustre in no-shading treatments and over S. capillifolium in moderate shading treatments. In addition, under deep shading, S. fallax showed a competitive advantage over both hummock species. A clear competitive hierarchy S. fallax>S. capillifolium>S. palustre emerged which was consistent with the hierarchy of side-shoot production. (5 The results suggest that all the species appear to tolerate deep shade (for a few months at least. In a shaded environment, especially under deeply shaded conditions, S. fallax retains its dominance in hollow habitats (if water availability is guaranteed by virtue of its advantage in side-shoot production. (6 If shading increases then the abundance of different Sphagnum species is likely to change.

  5. Effect of shade on various parameters of Friesian cows in a ...

    African Journals Online (AJOL)

    levels and solar radiation on the production of lactating dairy cows, is well .... period. Cortisol concentration (nmol /l ). No shade. SEa. Significance. Shade. 1984/85. 1985/86. 26.91 -+ .... Florida differ from local conditions, being subtropical with higher maximum .... A gradual rise in rectal temperature was, however, evident at.

  6. Segmentation-based retrospective shading correction in fluorescence microscopy E. coli images for quantitative analysis

    Science.gov (United States)

    Mai, Fei; Chang, Chunqi; Liu, Wenqing; Xu, Weichao; Hung, Yeung S.

    2009-10-01

    Due to the inherent imperfections in the imaging process, fluorescence microscopy images often suffer from spurious intensity variations, which is usually referred to as intensity inhomogeneity, intensity non uniformity, shading or bias field. In this paper, a retrospective shading correction method for fluorescence microscopy Escherichia coli (E. Coli) images is proposed based on segmentation result. Segmentation and shading correction are coupled together, so we iteratively correct the shading effects based on segmentation result and refine the segmentation by segmenting the image after shading correction. A fluorescence microscopy E. Coli image can be segmented (based on its intensity value) into two classes: the background and the cells, where the intensity variation within each class is close to zero if there is no shading. Therefore, we make use of this characteristics to correct the shading in each iteration. Shading is mathematically modeled as a multiplicative component and an additive noise component. The additive component is removed by a denoising process, and the multiplicative component is estimated using a fast algorithm to minimize the intra-class intensity variation. We tested our method on synthetic images and real fluorescence E.coli images. It works well not only for visual inspection, but also for numerical evaluation. Our proposed method should be useful for further quantitative analysis especially for protein expression value comparison.

  7. Effects of shading on starch pasting characteristics of indica hybrid rice (Oryza sativa L..

    Directory of Open Access Journals (Sweden)

    Li Wang

    Full Text Available Rice is an important staple crop throughout the world, but environmental stress like low-light conditions can negatively impact crop yield and quality. Using pot experiments and field experiments, we studied the effects of shading on starch pasting viscosity and starch content with six rice varieties for three years, using the Rapid Visco Analyser to measure starch pasting viscosity. Shading at different growth stages and in different rice varieties all affected the starch pasting characteristics of rice. The effects of shading on starch pasting viscosity at middle and later growth stages were greater than those at earlier stages. Shading enhanced breakdown but reduced hold viscosity and setback at tillering-elongation stage. Most pasting parameters changed significantly with shading after elongation stage. Furthermore, the responses of different varieties to shading differed markedly. The change scope of starch pasting viscosity in Dexiang 4103 was rather small after heading, while that in IIyou 498 and Gangyou 906 was small before heading. We observed clear tendencies in peak viscosity, breakdown, and pasting temperature of the five rice varieties with shading in 2010 and 2011. Correlation analysis indicated that the rice amylose content was negatively correlated with breakdown, but was positively correlated with setback. Based on our results, IIyou 498, Gangyou 906, and Dexiang 4103 had higher shade endurance, making these varieties most suitable for high-quality rice cultivation in low-light regions.

  8. Effects of shading on starch pasting characteristics of indica hybrid rice (Oryza sativa L.).

    Science.gov (United States)

    Wang, Li; Deng, Fei; Ren, Wan-Jun; Yang, Wen-Yu

    2013-01-01

    Rice is an important staple crop throughout the world, but environmental stress like low-light conditions can negatively impact crop yield and quality. Using pot experiments and field experiments, we studied the effects of shading on starch pasting viscosity and starch content with six rice varieties for three years, using the Rapid Visco Analyser to measure starch pasting viscosity. Shading at different growth stages and in different rice varieties all affected the starch pasting characteristics of rice. The effects of shading on starch pasting viscosity at middle and later growth stages were greater than those at earlier stages. Shading enhanced breakdown but reduced hold viscosity and setback at tillering-elongation stage. Most pasting parameters changed significantly with shading after elongation stage. Furthermore, the responses of different varieties to shading differed markedly. The change scope of starch pasting viscosity in Dexiang 4103 was rather small after heading, while that in IIyou 498 and Gangyou 906 was small before heading. We observed clear tendencies in peak viscosity, breakdown, and pasting temperature of the five rice varieties with shading in 2010 and 2011. Correlation analysis indicated that the rice amylose content was negatively correlated with breakdown, but was positively correlated with setback. Based on our results, IIyou 498, Gangyou 906, and Dexiang 4103 had higher shade endurance, making these varieties most suitable for high-quality rice cultivation in low-light regions.

  9. Shade factors for 149 taxa of in-leaf urban trees in the USA

    Science.gov (United States)

    E. Gregory McPherson; Qingfu Xiao; Natalie S. van Doorn; Nels Johnson; Shannon Albers; Paula J. Peper

    2018-01-01

    Shade factors, defined as the percentage of sky covered by foliage and branches within the perimeter of individual tree crowns, have been used to model the effects of trees on air pollutant uptake, building energy use and rainfall interception. For the past 30 years the primary source of shade factors was a database containing values from 47 species. In most...

  10. Non-linear effects of drought under shade: reconciling physiological and ecological models in plant communities

    NARCIS (Netherlands)

    Holmgren, M.; Gomez-Aparicio, L.; Quero, J.L.; Valladares, F.

    2012-01-01

    The combined effects of shade and drought on plant performance and the implications for species interactions are highly debated in plant ecology. Empirical evidence for positive and negative effects of shade on the performance of plants under dry conditions supports two contrasting theoretical

  11. Effects of shade on growth, production and quality of coffee (Coffea arabica) in Ethiopia

    NARCIS (Netherlands)

    Bote, A.D.; Struik, P.C.

    2011-01-01

    The research work was conducted to evaluate the effect of shade on growth and production of coffee plants. To achieve this, growth and productivity of coffee plants growing under shade trees were compared with those of coffee plants growing under direct sun light. Different physiological,

  12. [Research on the designing method of a special shade guide for tooth whitening].

    Science.gov (United States)

    Xu, Yingxin

    2015-10-01

    To investigate a method of designing an accurate and scientific shade guide, especially used for judging the effect of tooth whitening, by analyzing the colorimetric values of discolored teeth statistically. One hundred thirty-six pictures of patients who had been receiving the Beyond cold light whitening treatment from February 2009 to July 2014 were analyzed, including 25 tetracycline teeth, 61 mottled-enamel teeth, and 50 yellow teeth. The colorimetric values of discolored teeth were measured. The L* values of shade tabs were calculated by hierarchical clustering of those of discolored teeth. The a* and b* values of shade tabs were the mean of those observed for discolored teeth. Accordingly, different shade guides were designed for each type of discolored teeth, and the effects were evaluated. A statistically significant difference in colorimetric values was found among the three types of discolored teeth. Compared with the Vitapan Classical shade guide, the shade guides designed through the present method were more scientific and accurate in judging the effect of tooth whitening. Moreover, the arrangement of shade tabs was more logical, and the color difference between shade tabs and discolored teeth was smaller. The proposed designing method is theoretically feasible, although its clinical effect has yet to be proven.

  13. Growth and production of new superior rice varieties in the shade intensity

    Science.gov (United States)

    Alridiwirsah; Harahap, E. M.; Akoeb, E. N.; Hanum, H.

    2018-02-01

    Shade intensity is one of the most important requirements for plant growth, affecting growth, development, survival, and crop productivity. This study aims to evaluate the growth and productiom of New Superior Rice Varieties In The shade Intensity. This study was conducted in Balai Pengkajian Teknologi Pertanian, Pagar Merbau, Deli Serdang, North Sumatra. The research used completely randomized design with twofactors. The shade intensity (N) were 25%, 50% and no shade intensity as a control. Whereas new superior rice varieties were V1: Inpara 2, V2: Suluttan Unsrat 2, V3: Inpari Mugibat, V4: Inpari Sidenuk, V5: Mekongga, V6: Ciherang, V7:Inpari 10, V8: Inpari 3, V9: Inpari 4, V10: Inpari 30, dan V11: Cibogo. The result indicated that new superior rice varietiesshowedsignificant effectonthe growth and productionvariablesuch as leaf area, where Inpari Sidenuk variety was the highest among the varieties. Total chorophyll, the highest was found on Inpari variety. Number of tillers and plant height where the highest was found on Ciherang variety. The shade intensity showed significant effect on leaf area, where 25% shade intensity was the highest. Total chlorophyll, the highest was found on 50% shade intensity, number of tillers, the highest was found on no shade intensity.

  14. Development and Performance Evaluation of a Rain Shade for a low ...

    African Journals Online (AJOL)

    Aderoju Tomiwa

    for a low scale agricultural produce, The rain shade consists of a geared D. C motor, 12V battery, ... rain shade was embarked on in this research work. ... (9) Face width, b. +. 5mm (10). Determination of weight acting on the Extension. Arm: The measured weight of the polyester fabric equals 14.7N, while the combined ...

  15. 29 CFR 780.506 - Dependence of exemption on shade-grown tobacco operations.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Dependence of exemption on shade-grown tobacco operations. 780.506 Section 780.506 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION....506 Dependence of exemption on shade-grown tobacco operations. The exemption provided by section 13(a...

  16. The effect of shade on chlorophyll and anthocyanin content of upland red rice

    Science.gov (United States)

    Muhidin; Syam'un, E.; Kaimuddin; Musa, Y.; Sadimantara, G. R.; Usman; Leomo, S.; Rakian, T. C.

    2018-02-01

    Upland red rice (Oryza sativa) is a staple food and contains anthocyanin, which can act as antioxidants, plays an important role both for the plant itself and for human health. Levels of antioxidants in rice can be affected by the availability of light. The results showed that the difference of shade, cultivar, and interaction both significantly affect the content of chlorophyll a, chlorophyll b and total chlorophyll. The results also showed that shade could increase chlorophyll in all cultivars tested. The highest levels of chlorophyll a were present in the moderate shade level (n2), then decreased at the shelter level (n3) and increased again at high levels (n4). While on chlorophyll content b, it appears that shade increased chlorophyll b in all cultivars tested and this increase was linear to the increase of shade. The shade treatment may increase the anthocyanin content and the increase depending on the type of cultivar. Increased levels of anthocyanin highest due to shade occurred on Jangkobembe cultivar. The original level of anthocyanin on Jangkobembe cultivar averaged 0.096 mg g-1 increased to 2.487 mg g-1 or increased 26 fold. It is concluded that the shade had a significant effect on the chlorophyll and anthocyanin content.

  17. Effects of shading on Vallisneria natans (Lour.) H. Hara growth

    DEFF Research Database (Denmark)

    Fox, Anthony David; Meng, F; Shen, X

    2013-01-01

    , but dry weight fruit production was significantly reduced at 90% shading. We conclude that above 50% surface shading, V. natans plants suffer reductions in accumulated biomass and investment in sexual reproduction. We contend that recent expansions in the extent of the native floating water chestnut Trapa...

  18. 29 CFR 780.505 - Definition of “shade-grown tobacco.”

    Science.gov (United States)

    2010-07-01

    ... Employment or Agricultural Employees in Processing Shade-Grown Tobacco; Exemption From Minimum Wage and... 29 Labor 3 2010-07-01 2010-07-01 false Definition of âshade-grown tobacco.â 780.505 Section 780.505 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR...

  19. The production of Physalis spp. seedlings grown under different-colored shade nets

    Directory of Open Access Journals (Sweden)

    Daniel Fernandes da Silva

    2016-04-01

    Full Text Available The objective of this study was to evaluate the production of seedlings of Physalis L. species under different-colored shade nets. Four shade nets individually stained white, blue, red and black, all with 50% shading, were used in this study, and an additional  treatment (control was used in which seedlings were grown in full sun. The study examined four species of Physalis, namely, P. peruviana, P. pubescens, P. minima and P. ixocarpa. The experiment followed a randomized block design with three blocks and 25 seeds per plot. The species were sown in styrofoam trays. Germination was monitored daily to calculate the Emergency Velocity Index (EVI and stabilize the overall percentage of emergence. Height, stem diameter, number of leaves, leaf area index and dry mass of seedlings were assessed at 50 days after sowing. The study found that these species react differently to changes in the light spectrum. Seedlings of P. peruviana should be grown under a white or red shade net; of P. pubescens under a white or black shade net; of P. minima under a white, red or black shade net; and of P. ixocarpa under a white shade net. For all species, 50% shade should be used.

  20. The effects of providing portable shade at pasture on dairy cow behavior and physiology.

    Science.gov (United States)

    Palacio, S; Bergeron, R; Lachance, S; Vasseur, E

    2015-09-01

    Access to pasture has advantages for cows such as reduced lameness and improved udder health, but also may expose cows to stressors such as extreme heat. The objective of this study was to understand how portable shade affected physiological and behavioral responses of pastured dairy cows in a Canadian summer. Over 8wk, a total of 24 lactating Holstein cows were separated into 2 treatments, one with access to shade and a control without access to shade. The cows were pastured in groups of 4, with 3 field sections per treatment. Instantaneous scan sampling of behaviors (drinking, lying, grazing, other) performed in the shade or not were recorded every 5min for 3h/d during the hottest part of the day (peak hours: 1130-1530h) 3d/wk. Ambient temperature, humidity, and vaginal temperature were recorded at 10-min intervals. Daily milk production was also recorded. Differences between treatments by week were analyzed using the generalized linear mixed model with group as random effect and treatment as fixed effect. Cows with shade access were observed at the water trough up to 6.42 times less and lying down up to 1.75 times more. Cows with shade access grazed up to 1.5 times more but only when the temperature-humidity index was above their comfort threshold (≥72) during the hottest part of the day (wk 2). Cows sought shade when it was made available, but spent less than half of their time observed (%) in the shade (40.8±4.67) with the exception of wk 2 when most of the time was spent under the shade (74.3±4.77). Daily lying time was highest during peak hours for cows with shade access. However, no overall difference in total lying time between the 2 treatments was observed. No differences were found in vaginal temperature or milk production between treatments with the exception of wk 1 for daily milk production, which was higher for cows in the control treatment. In conclusion, cows sought shade when it was provided at pasture, whereas cows without access to shade

  1. World in Mercator Projection, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    This image of the world was generated with data from the Shuttle Radar Topography Mission (SRTM). The SRTM Project has recently released a new global data set called SRTM30, where the original one arcsecond of latitude and longitude resolution (about 30 meters, or 98 feet, at the equator) was reduced to 30 arcseconds (about 928 meters, or 1496 feet.) This image was created from that data set and shows the world between 60 degrees south and 60 degrees north latitude, covering 80% of the Earth's land mass. The image is in the Mercator Projection commonly used for maps of the world.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise,Washington, D.C.Orientation: North toward the top, Mercator projection Image Data: shaded and colored SRTM

  2. Shaded Relief with Color as Height, California Mosaic

    Science.gov (United States)

    2002-01-01

    The diversity of landforms that make up the state of California is evident in this new rendition of the 3-D topography of the state. The Central Valley, flanked on the east by the Sierra Nevada, dominates the scene with San Francisco and Monterey Bays clearly visible at left center. Other features of interest include Lake Tahoe at the edge to the right of San Francisco, Mono Lake below Lake Tahoe, and the Salton Sea at the lower right. The prominent sideways 'V' in the southern part of the state is the intersection of the Garlock and San Andreas Faults - to the east is the Mojave Desert. Offshore are the Channel Islands and to the right of them lies the city of Los Angeles.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction. North-facing slopes appear bright and south-facing slopes appear dark. Color coding is directly related to topographic height, with blue and green at the lower elevations, rising through yellow and brown to white at the highest elevations.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar(SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense, and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science

  3. Shaded Relief with Color as Height, St. Louis, Missouri

    Science.gov (United States)

    2002-01-01

    The confluence of the Mississippi, Missouri and Illinois rivers are shown in this view of the St. Louis area from the Shuttle Radar Topography Mission. The Mississippi flows from the upper left of the image and first meets the Illinois, flowing southward from the top right. It then joins the Missouri, flowing from the west across the center of the picture. The rivers themselves appear black here, and one can clearly see the green-colored floodplains in which they are contained. These floodplains are at particular risk during times of flooding. The Mississippi forms the state boundary between Illinois (to the right) and Missouri (to the left), with the city of St. Louis located on the Mississippi just below the point where it meets the Missouri. This location at the hub of the major American waterways helped establish St. Louis' reputation as the 'Gateway to the West.'Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction. North-facing slopes appear bright and south-facing slopes appear dark. Color coding is directly related to topographic height, with blue and green at the lower elevations, rising through yellow and brown to white at the highest elevations.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar(SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping

  4. Shenandoah National Park, Virginia, Shaded Relief with Height as Color

    Science.gov (United States)

    2003-01-01

    Shenandoah National Park lies astride part of the Blue Ridge Mountains, which form the southeastern range of the greater Appalachian Mountains in Virginia. The park is well framed by this one-degree of latitude (38-39 north) by one-degree of longitude (78-79 west) cell of Shuttle Radar Topography Mission data, and it appears here as the most prominent ridge trending diagonally across the scene. Skyline Drive, a 169-kilometer (105-mile) road that winds along the crest of the mountains through the length the park, provides vistas of the surrounding landscape. The Shenandoah River flows through the valley to the west, with Massanutten Mountain standing between the river's north and south forks. Unusually pronounced meanders of both river forks are very evident near the top center of this scene. Massanutten Mountain itself is an unusually distinctive landform also, consisting of highly elongated looping folds of sedimentary rock. The rolling Piedmont country lies to the southeast of the park, with Charlottesville located at the bottom center of the scene.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to bluish-white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60

  5. SRTM Colored Height and Shaded Relief: Lava plateaus in Argentina

    Science.gov (United States)

    2001-01-01

    All of the major landforms relate to volcanism and/or erosion in this Shuttle Radar Topography Mission scene of Patagonia, near La Esperanza, Argentina. The two prominent plateaus once formed a continuous surface that extended over much of this region. Younger volcanoes have grown through and atop the plateau, and one just south of this scene has sent a long, narrow flow down a stream channel (lower left). The topographic pattern shows that streams dominate the erosion processes in this arid environment even though wind is known to move substantial amounts of sediment here.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark, as would be the case at noon at this latitude in the southern hemisphere. Color-coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to white at the highest elevations.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense, and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC.Size: 62.4 by 88.8 kilometers

  6. Mts. Agung and Batur, Bali, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    This perspective view shows the major volcanic group of Bali, one 13,000 islands comprising the nation of Indonesia. The conical mountain to the left is Gunung Agung, at 3,148 meters (10,308 feet) the highest point on Bali and an object of great significance in Balinese religion and culture. Agung underwent a major eruption in 1963 after more than 100 years of dormancy, resulting in the loss of over 1,000 lives.In the center is the complex structure of Batur volcano, showing a caldera (volcanic crater) left over from a massive catastrophic eruption about 30,000 years ago. Judging from the total volume of the outer crater and the volcano, that once lay above it, approximately 140 cubic kilometers(33.4 cubic miles) of material must have been produced by this eruption, making it one of the largest known volcanic events on Earth. Batur is still active and has erupted at least 22 times since the 1800's.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National

  7. SRTM Colored Height and Shaded Relief: Near Zapala, Argentina

    Science.gov (United States)

    2001-01-01

    Topographic data provided by the Shuttle Radar Topography Mission can provide many clues to geologic history and processes. This view of an area southwest of Zapala, Argentina, shows a wide diversity of geologic features. The highest peaks (left) appear to be massive (un-layered)crystalline rocks, perhaps granites. To their right (eastward) are tilted and eroded layered rocks, perhaps old lava flows, forming prominent ridges. Farther east and south, more subtle and curvilinear ridges show that the rock layers have not only been tilted but also folded. At the upper right, plateaus that cap the underlying geologic complexities are more recent lava flows - younger than the folding, but older than the current erosional pattern. Landforms in the southeast (lower right) and south-central areas appear partially wind sculpted.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark, as would be the case at noon at this latitude in the southern hemisphere. Color-coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard Space Shuttle Endeavour, launched on February 11,2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on Space Shuttle Endeavour in 1994. Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National

  8. SRTM Colored Height and Shaded Relief: Las Bayas, Argentina

    Science.gov (United States)

    2001-01-01

    The interplay of volcanism, stream erosion and landslides is evident in this Shuttle Radar Topography Mission view of the eastern flank of the Andes Mountains, southeast of San Carlos de Bariloche, Argentina. Older lava flows emanating from the Andes once covered much of this area. Younger, local volcanoes (seen here as small peaks) then covered parts of the area with fresh, erosion resistant flows (seen here as very smooth surfaces). Subsequent erosion has created fine patterns on the older surfaces (bottom of the image) and bolder, irregular patterns through and around the younger surfaces (upper center and right center). Meanwhile, where a large stream immediately borders the resistant plateau (center of the image), lateral erosion has undercut the resistant plateau causing slivers of it to fall into the stream channel. This scene well illustrate show topographic data alone can reveal some aspects of recent geologic history.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark, as would be the case at noon at this latitude in the southern hemisphere. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and

  9. Instream cover and shade mediate avian predation on trout in semi-natural streams

    Science.gov (United States)

    Penaluna, Brooke E.; Dunham, Jason B.; Noakes, David L. G.

    2015-01-01

    Piscivory by birds can be significant, particularly on fish in small streams and during seasonal low flow when available cover from predators can be limited. Yet, how varying amounts of cover may change the extent of predation mortality from avian predators on fish is not clear. We evaluated size-selective survival of coastal cutthroat trout (Oncorhynchus clarkii clarkii) in replicated semi-natural stream sections. These sections provided high (0.01 m2 of cover per m2 of stream) or low (0.002 m2 of cover per m2 of stream) levels of instream cover available to trout and were closed to emigration. Each fish was individually tagged, allowing us to track retention of individuals during the course of the 36-day experiment, which we attributed to survival from predators, because fish had no other way to leave the streams. Although other avian predators may have been active in our system and not detected, the only predator observed was the belted kingfisher Megaceryle alcyon, which is known to prey heavily on fish. In both treatments, trout >20.4 cm were not preyed upon indicating an increased ability to prey upon on smaller individuals. Increased availability of cover improved survival of trout by 12% in high relative to low cover stream sections. Trout also survived better in stream sections with greater shade, a factor we could not control in our system. Collectively, these findings indicate that instream cover and shade from avian predators can play an important role in driving survival of fish in small streams or during periods of low flow.

  10. Photosynthetic responses to understory shade and elevated carbon dioxide concentration in 4 northern hardwood tree species

    International Nuclear Information System (INIS)

    Sefcik, L.T.; Zak, D.R.; Ellsworth, D.S.

    2006-01-01

    Stimulation of photosynthesis in response to elevated carbon dioxide (CO 2 ) varies among tree species and species groups. In this study, seedling responses to elevated atmospheric carbon dioxide (CO 2 ) concentrations and solar irradiance over 2 growing seasons were investigated for shade tolerant Acer saccharum Marsh.; Fagus grandifolia J.F. Ehrh; and shade-intolerant Prunus serotina. Seedlings were exposed to a combination of elevated and ambient concentrations of CO 2 and understory shade in open-top chambers placed in a forest understory. It was observed that the elevated CO 2 treatment increased mean light-saturated net photosynthetic rates by 63 per cent in the shade-tolerant species and 67 per cent in the shade-intolerant species. When measured at the elevated CO 2 , long-term enhancement of photosynthesis was 10 per cent lower than the instantaneous enhancement observed in ambient-CO 2 -grown plants. As the growth irradiance increased, proportional enhancement due to elevated CO 2 decreased from 97 per cent for plants grown in deep shade to 47 per cent for plants grown in moderate shade. Results indicated that in nitrogen (N) limited northern temperate forests, trees grown in deep shade may display greater photosynthetic gains from a CO 2 enriched atmosphere than trees growing in more moderate shade, due to greater down-regulation. It was concluded that if elevated CO 2 levels promote the survival of shade-intolerant species in dim understory light, the future composition and dynamics of successional forest communities may be altered. 70 refs., 2 tabs., 3 figs

  11. Shaded Relief with Height as Color, Yucatan Peninsula, Mexico

    Science.gov (United States)

    2003-01-01

    This shaded relief image of Mexico's Yucatan Peninsula show a subtle, but unmistakable, indication of the Chicxulub impact crater. Most scientists now agree that this impact was the cause of the Cretatious-Tertiary Extinction, the event 65 million years ago that marked the sudden extinction of the dinosaurs as well as the majority of life then on Earth.Most of the peninsula is visible here, along with the island of Cozumel off the east coast. The Yucatan is a plateau composed mostly of limestone and is an area of very low relief with elevations varying by less than a few hundred meters (about 500 feet.) In this computer-enhanced image the topography has been greatly exaggerated to highlight a semicircular trough, the darker green arcing line at the upper left corner of the peninsula. This trough is only about 3 to 5 meters (10 to 15 feet) deep and is about 5 km. wide (3 miles), so subtle that if you walked across it you probably would not notice it, and is a surface expression of the crater's outer boundary. Scientists believe the impact, which was centered just off the coast in the Caribbean, altered the subsurface rocks such that the overlying limestone sediments, which formed later and erode very easily, would preferentially erode on the vicinity of the crater rim. This formed the trough as well as numerous sinkholes (called cenotes) which are visible as small circular depressions.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwestern slopes appear bright and southeastern slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.For a smaller, annotated version of this image, please select Figure 1, below: [figure removed for brevity, see original site] (Large image: 1.5 m

  12. Age determination of the world’s oldest movable metal types through measuring the “meog” using AMS

    International Nuclear Information System (INIS)

    Hong, W.; Lee, S.C.; Park, J.H.; Park, G.; Sung, K.H.; Lee, J.G.; Nam, K.H.

    2015-01-01

    The fabrication year of a set of movable metal types that were thought to be used for printing “Jeungdoga” was investigated. Since the types were made from bronze and did not contain carbon, an organic black ink called “meog” was collected from the type surfaces to quantify their ages. The meog samples were collected from 34 metal types, and 27 ages were obtained. The youngest age was 798 ± 44 yrBP, and the oldest reasonable age was 1166 ± 43 yrBP. The weighted average after eliminating ages with poor statistics was 950 ± 28 yrBP. This age is 300 years older than that of the Jikji (AD 1377), which is a Buddhist document recognized as the world’s oldest document printed using metal types, and also older than that of the Gutenberg bible (AD 1450).

  13. Age determination of the world’s oldest movable metal types through measuring the “meog” using AMS

    Energy Technology Data Exchange (ETDEWEB)

    Hong, W., E-mail: whong@kigam.re.kr [Geochemical Analysis Center, Korea Institute of Geoscience and Mineral Resources (KIGAM), 124 Gwahang-no, Yuseong-gu, Daejeon 305-350 (Korea, Republic of); Department of Accelerator and Beam Nano Engineering, University of Science and Technology (UST), 217 Gajeong-ro, Yuseong-gu, Daejeon 305-333 (Korea, Republic of); Lee, S.C. [Cheongju Early Printing Museum, 866 Uncheon-dong, Hongdeok-gu, Cheongju, Chungbuk (Korea, Republic of); Park, J.H.; Park, G. [Geochemical Analysis Center, Korea Institute of Geoscience and Mineral Resources (KIGAM), 124 Gwahang-no, Yuseong-gu, Daejeon 305-350 (Korea, Republic of); Sung, K.H. [Geochemical Analysis Center, Korea Institute of Geoscience and Mineral Resources (KIGAM), 124 Gwahang-no, Yuseong-gu, Daejeon 305-350 (Korea, Republic of); Department of Accelerator and Beam Nano Engineering, University of Science and Technology (UST), 217 Gajeong-ro, Yuseong-gu, Daejeon 305-333 (Korea, Republic of); Lee, J.G. [Geochemical Analysis Center, Korea Institute of Geoscience and Mineral Resources (KIGAM), 124 Gwahang-no, Yuseong-gu, Daejeon 305-350 (Korea, Republic of); Nam, K.H. [Department of Library and Information Science, Kyungpook National University, 67 Kyungdaejungmun-no, Buk-gu, Daegu 702-701 (Korea, Republic of)

    2015-10-15

    The fabrication year of a set of movable metal types that were thought to be used for printing “Jeungdoga” was investigated. Since the types were made from bronze and did not contain carbon, an organic black ink called “meog” was collected from the type surfaces to quantify their ages. The meog samples were collected from 34 metal types, and 27 ages were obtained. The youngest age was 798 ± 44 yrBP, and the oldest reasonable age was 1166 ± 43 yrBP. The weighted average after eliminating ages with poor statistics was 950 ± 28 yrBP. This age is 300 years older than that of the Jikji (AD 1377), which is a Buddhist document recognized as the world’s oldest document printed using metal types, and also older than that of the Gutenberg bible (AD 1450).

  14. Design and construction of the movable limiters for holding the plasma in position in the nuclear fusion experiment TEXTOR

    International Nuclear Information System (INIS)

    Butzek, D.A.; Derichs, K.

    1983-11-01

    The nuclear fusion experiment TEXTOR (Tokamak Experiment for Technology Oriented Research) has been constructed for investigation of plasma-wall-interaction. The plasma is generated inside a torus-shaped vacuum vessel. In addition to the magnetic fields mechanical limiters are provided to hold the plasma in position. The limiter scheme of textor consists of main limiters and reference limiters (measuring limiters). Main and reference limiters are mounted in different cross sections of the torus. The main limiters are movable during the plasma discharge while the reference limiters are kept fixed. They are adjustable. Thus, by moving the main limiters, the reference limiters can be exposed to different thermal loads during the discharge. Exposing the reference limiters to the plasma, first results have been obtained concerning the scrape off layer: thickness, fluxes of hydrogen and chromium through this layer. The limiter scheme, the final design and construction of the limiters and the first phase of operation are described in this report. (orig.) [de

  15. Novel method for the preparation of core-shell nanoparticles with movable Ag core and polystyrene loop shell

    International Nuclear Information System (INIS)

    Liu Weijun; Zhang Zhicheng; He Weidong; Zheng Cheng; Ge Xuewu; Li, Jian; Liu Huarong; Jiang Hao

    2006-01-01

    Core/shell nanoparticles with movable silver (Ag) core and polystyrene (PSt) shell (Ag at PSt nanoparticle) were successfully synthesized at room temperature and under ambient pressure via two steps: γ-irradiation and interfacial-initiated polymerization. Firstly, mono-dispersed Ag nanoparticles with diameters 20 nm were synthesized in inversed microemulsion by reducing silver nitrate under γ-irradiation. Then, Ag nanoparticles were coated with PSt via interfacial-initiated polymerization with cumene hydroperoxide/ferrous sulfate/disodium ethylenediaminetetraacetate/sodium formaldehyde sulfoxylate (CHPO-Fe 2+ -EDTA-SFS) as the redox initiation pair. The resulted Ag at PSt nanoparticles were identified by transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS)

  16. An analytical model of stand dynamics as a function of tree growth, mortality and recruitment: the shade tolerance-stand structure hypothesis revisited.

    Science.gov (United States)

    Zavala, Miguel A; Angulo, Oscar; Bravo de la Parra, Rafael; López-Marcos, Juan C

    2007-02-07

    Light competition and interspecific differences in shade tolerance are considered key determinants of forest stand structure and dynamics. Specifically two main stand diameter distribution types as a function of shade tolerance have been proposed based on empirical observations. All-aged stands of shade tolerant species tend to have steeply descending, monotonic diameter distributions (inverse J-shaped curves). Shade intolerant species in contrast typically exhibit normal (unimodal) tree diameter distributions due to high mortality rates of smaller suppressed trees. In this study we explore the generality of this hypothesis which implies a causal relationship between light competition or shade tolerance and stand structure. For this purpose we formulate a partial differential equation system of stand dynamics as a function of individual tree growth, recruitment and mortality which allows us to explore possible individual-based mechanisms--e.g. light competition-underlying observed patterns of stand structure--e.g. unimodal or inverse J-shaped equilibrium diameter curves. We find that contrary to expectations interspecific differences in growth patterns can result alone in any of the two diameter distributions types observed in the field. In particular, slow growing species can present unimodal equilibrium curves even in the absence of light competition. Moreover, light competition and shade intolerance evaluated both at the tree growth and mortality stages did not have a significant impact on stand structure that tended to converge systematically towards an inverse J-shaped curves for most tree growth scenarios. Realistic transient stand dynamics for even aged stands of shade intolerant species (unimodal curves) were only obtained when recruitment was completely suppressed, providing further evidence on the critical role played by juvenile stages of tree development (e.g. the sampling stage) on final forest structure and composition. The results also point out the

  17. Assessment of the influence of gender and skin color on the preference of tooth shade in Saudi population

    Directory of Open Access Journals (Sweden)

    Nawaf Labban

    2017-07-01

    Conclusion: Gender and skin color influences the perception of teeth shades among general population. Therefore, lighter tooth shades (BL1, BL2 for lighter skin color and comparatively darker tooth shades (BL4, B1, A1 for darker skin individuals should be prescribed as these are perceived as natural among Saudi population.

  18. ALTERNATIVE APIARIES SHADING ALTERNATIVAS DE SOMBREAMENTO PARA APIÁRIOS

    Directory of Open Access Journals (Sweden)

    Ricardo Costa Rodrigues de Camargo

    2011-07-01

    Full Text Available

    Beehives shading can be a strategy to minimize the heat stress suffered by bees in tropical regions such as the Northeastern Brazil. So, the objective of this study was to evaluate the influence of different beehives shading conditions on the development and quality of honey produced in Apis mellifera colonies. The experiment was carried out in an apiary owned by the Embrapa Meio-Norte, in Castelo do Piauí, Piauí State, Brazil. Bee colonies were placed under the shade provided by straw, polypropylene screen (80% shading, and trees, and under direct solar radiation, in a completely randomized design, with six replications. Data concerning beehives weight and breeding and feeding areas were analyzed by using the Kruskal-Wallis test. Honey samples collected from beehives were submitted to chemical analyses, in order to determine hydroxymethylfurfural (HMF, acidity, and diastase activities. It was observed that the artificial covers did not provide significant beneficial effects on the colonies development. Thermoregulation was impaired

  19. Eco toxicological assessment of the usage of chemical meliorants and fertilizers on the content of movable fluorine in humus shallow solonetz of the Northern Kazakhstan

    International Nuclear Information System (INIS)

    Sarsenova, A.A.; Ermokhin, Yu.I.; Kazantsev, N.Ya.

    2008-01-01

    The aim of present research is the assessment of the ecological rate setting of chemical meliorants and fertilizers using for melioration of solonetz. The scientific problem of work is the study of influence of chemical meliorants, phosphogypsum doses and nitrogen fertilizer on the content of movable fluorine in soil.

  20. The movable polarized target as a basic equipment for high energy spin physics experiments at the JINR-Dubna accelerator complex

    Energy Technology Data Exchange (ETDEWEB)

    Lehar, F.; Adiasevich, B.; Androsov, V.P.; Angelov, N.; Anischenko, N.; Antonenko, V.; Ball, J.; Baryshevsky, V.G.; Bazhanov, N.A.; Belyaev, A.A.; Benda, B.; Bodyagin, V.; Borisov, N.; Borzunov, Yu.; Bradamante, F.; Bunyatova, E.; Burinov, V.; Chernykh, E.; Combet, M.; Datskov, A.; Durand, G.; Dzyubak, A.P.; Fontaine, J.M.; Get`man, V.A.; Giorgi, M.; Golovanov, L.; Grebenyuk, V.; Grosnick, D.; Gurevich, G.; Hasegawa, T.; Hill, D.; Horikawa, N.; Igo, G.; Janout, Z.; Kalinnikov, V.A.; Karnaukhov, I.M.; Kasprzyk, T.; Khachaturov, B.A.; Kirillov, A.; Kisselev, Yu.; Kousmine, E.S.; Kovalenko, A.; Kovaljov, A.I.; Ladygin, V.P.; Lazarev, A.; Leconte, P.; Lesquen, A. de; Lukhanin, A.A.; Mango, S.; Martin, A.; Matafonov, V.N.; Matyushevsky, E.; Mironov, S.; Neganov, A.B.; Neganov, B.S.; Nomofilov, A.; Perelygin, V.; Plis, Yu.; Pilipenko, Yu.; Pisarev, I.L.; Piskunov, N.; Polunin, Yu.; Popkov, Yu.P.; Propov, A.A.; Prokofiev, A.N.; Rekalo, M.P.; Rukoyatkin, P.; Sans, J.L.; Sapozhnikov, M.G.; Sharov, V.; Shilov, S.; Shishov, Yu.; Sitnik, I.M.; Sorokin, P.V.; Spinka, H.; Sporov, E.A.; Strunov, L.N.; Svetov, A.; De Swart, J.J.; Telegin, Yu.P.; Tolmashov, I.; Trentalange, S.; Tsvinev, A.; Usov, Yu.A.; Vikhrov, V.V.; Whitten, C.A.; Zaporozhets, S.; Zarubin, A.; Zhdanov, A.A.; Zolin, L. [CEA Centre d`Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France). Dept. d`Astrophysique, de Physique des Particules, de Physique Nucleaire et de l`Instrumentation Associee]|[I.V. Kurchatov Inst. of Atomic Energy, Moscow (Russian Federation)]|[Kharkov Inst. of Physics and Technology (Russian Federation)]|[Lab. of Nuclear Problems, JINR, Dubna (Russian Federation)]|[Lab. of High Energy Physics, JINR, Dubna (Russian Federation)]|[Lab. National SATURNE, CNRS, 91 - Gif-sur-Yvette (France)]|[Inst. of Physics, Belarus Academy of Sciences, Minsk (Belarus)]|[Dept. of Physics, Petersburg Nuclear Physics Inst., Gatchina (Russian Federation)

    1995-03-01

    A movable polarized proton target is planned to be installed in polarized beams of the Synchrophasotron-Nuclotron complex in order to carry out a spin physics experimental program at Dubna. The project is described and the first proposed experiments are discussed. ((orig.))

  1. The movable polarized target as a basic equipment for high energy spin physics experiments at the JINR-Dubna accelerator complex

    International Nuclear Information System (INIS)

    Lehar, F.; Adiasevich, B.; Androsov, V.P.; Angelov, N.; Anischenko, N.; Antonenko, V.; Ball, J.; Baryshevsky, V.G.; Bazhanov, N.A.; Belyaev, A.A.; Benda, B.; Bodyagin, V.; Borisov, N.; Borzunov, Yu.; Bradamante, F.; Bunyatova, E.; Burinov, V.; Chernykh, E.; Combet, M.; Datskov, A.; Durand, G.; Dzyubak, A.P.; Fontaine, J.M.; Get'man, V.A.; Giorgi, M.; Golovanov, L.; Grebenyuk, V.; Grosnick, D.; Gurevich, G.; Hasegawa, T.; Hill, D.; Horikawa, N.; Igo, G.; Janout, Z.; Kalinnikov, V.A.; Karnaukhov, I.M.; Kasprzyk, T.; Khachaturov, B.A.; Kirillov, A.; Kisselev, Yu.; Kousmine, E.S.; Kovalenko, A.; Kovaljov, A.I.; Ladygin, V.P.; Lazarev, A.; Leconte, P.; Lesquen, A. de; Lukhanin, A.A.; Mango, S.; Martin, A.; Matafonov, V.N.; Matyushevsky, E.; Mironov, S.; Neganov, A.B.; Neganov, B.S.; Nomofilov, A.; Perelygin, V.; Plis, Yu.; Pilipenko, Yu.; Pisarev, I.L.; Piskunov, N.; Polunin, Yu.; Popkov, Yu.P.; Propov, A.A.; Prokofiev, A.N.; Rekalo, M.P.; Rukoyatkin, P.; Sans, J.L.; Sapozhnikov, M.G.; Sharov, V.; Shilov, S.; Shishov, Yu.; Sitnik, I.M.; Sorokin, P.V.; Spinka, H.; Sporov, E.A.; Strunov, L.N.; Svetov, A.; De Swart, J.J.; Telegin, Yu.P.; Tolmashov, I.; Trentalange, S.; Tsvinev, A.; Usov, Yu.A.; Vikhrov, V.V.; Whitten, C.A.; Zaporozhets, S.; Zarubin, A.; Zhdanov, A.A.; Zolin, L.

    1995-01-01

    A movable polarized proton target is planned to be installed in polarized beams of the Synchrophasotron-Nuclotron complex in order to carry out a spin physics experimental program at Dubna. The project is described and the first proposed experiments are discussed. ((orig.))

  2. Leaf traits show different relationships with shade tolerance in moist versus dry tropical forests.

    Science.gov (United States)

    Poorter, Lourens

    2009-03-01

    Shade tolerance is the central paradigm for understanding forest succession and dynamics, but there is considerable debate as to what the salient features of shade tolerance are, whether adult leaves show similar shade adaptations to seedling leaves, and whether the same leaf adaptations are found in forests under different climatic control. Here, adult leaf and metamer traits were measured for 39 tree species from a tropical moist semi-evergreen forest (1580 mm rain yr(-1)) and 41 species from a dry deciduous forest (1160 mm yr(-1)) in Bolivia. Twenty-six functional traits were measured and related to species regeneration light requirements.Adult leaf traits were clearly associated with shade tolerance. Different, rather than stronger, shade adaptations were found for moist compared with dry forest species. Shade adaptations exclusively found in the evergreen moist forest were related to tough and persistent leaves, and shade adaptations in the dry deciduous forest were related to high light interception and water use.These results suggest that, for forests differing in rainfall seasonality, there is a shift in the relative importance of functional leaf traits and performance trade-offs that control light partitioning. In the moist evergreen forest leaf traits underlying the growth-survival trade-off are important, whereas in the seasonally deciduous forest leaf traits underlying the growth trade-off between low and high light might become important.

  3. Improvement of Shade Resilience in Photovoltaic Modules Using Buck Converters in a Smart Module Architecture

    Directory of Open Access Journals (Sweden)

    S. Zahra Mirbagheri Golroodbari

    2018-01-01

    Full Text Available Partial shading has a nonlinear effect on the performance of photovoltaic (PV modules. Different methods of optimizing energy harvesting under partial shading conditions have been suggested to mitigate this issue. In this paper, a smart PV module architecture is proposed for improvement of shade resilience in a PV module consisting of 60 silicon solar cells, which compensates the current drops caused by partial shading. The architecture consists of groups of series-connected solar cells in parallel to a DC-DC buck converter. The number of cell groups is optimized with respect to cell and converter specifications using a least-squares support vector machine method. A generic model is developed to simulate the behavior of the smart architecture under different shading patterns, using high time resolution irradiance data. In this research the shading patterns are a combination of random and pole shadows. To investigate the shade resilience, results for the smart architecture are compared with an ideal module, and also ordinary series and parallel connected architectures. Although the annual yield for the smart architecture is 79.5% of the yield of an ideal module, we show that the smart architecture outperforms a standard series connected module by 47%, and a parallel architecture by 13.4%.

  4. Morphophysiological Behavior and Cambial Activity in Seedlings of Two Amazonian Tree Species under Shade

    Directory of Open Access Journals (Sweden)

    Monyck Jeane dos Santos Lopes

    2015-01-01

    Full Text Available Variations in light intensity can lead to important anatomical and morphophysiological changes in plants. Aiming to increase knowledge about the Amazonian tree species, this study examines the influence of shade on the cambial activity and development of Parkia gigantocarpa Ducke and Schizolobium parahyba var. amazonicum (Huber ex Ducke Barneby seedlings. Seedlings of the two species were grown in a nursery under four shade intensities (treatments: full sun, low, moderate, and high shade (resp., 0%, 23%, 67%, and 73% of shade, or 2000, 1540, 660, and 540 µmol·m−2·s−1 obtained with polyethylene screens. We measured plant height, stem diameter, biomass production, stomatal conductance (gs, transpiration (E, photosynthesis (A, and cambial activity (CA (xylem, cambium, and phloem. Also, we calculated the Dickson Quality Index (DQI. The highest values of biomass production, gs,  E, A, and DQI, were found under full sun, in P. gigantocarpa, and under low shade intensity in S. parahyba. In both species high shade intensity reduced CA. We concluded that the CA and the physiological and morphological attributes work together, explaining the radial growth and increasing seedlings quality, which optimized efficient seedling production under full sun, in P. gigantocarpa, and under low shade intensity in S. parahyba.

  5. An appraisal of the classic forest succession paradigm with the shade tolerance index.

    Science.gov (United States)

    Lienard, Jean; Florescu, Ionut; Strigul, Nikolay

    2015-01-01

    In this paper we revisit the classic theory of forest succession that relates shade tolerance and species replacement and assess its validity to understand patch-mosaic patterns of forested ecosystems of the USA. We introduce a macroscopic parameter called the "shade tolerance index" and compare it to the classic continuum index in southern Wisconsin forests. We exemplify shade tolerance driven succession in White Pine-Eastern Hemlock forests using computer simulations and analyzing approximated chronosequence data from the USDA FIA forest inventory. We describe this parameter across the last 50 years in the ecoregions of mainland USA, and demonstrate that it does not correlate with the usual macroscopic characteristics of stand age, biomass, basal area, and biodiversity measures. We characterize the dynamics of shade tolerance index using transition matrices and delimit geographical areas based on the relevance of shade tolerance to explain forest succession. We conclude that shade tolerance driven succession is linked to climatic variables and can be considered as a primary driving factor of forest dynamics mostly in central-north and northeastern areas in the USA. Overall, the shade tolerance index constitutes a new quantitative approach that can be used to understand and predict succession of forested ecosystems and biogeographic patterns.

  6. An appraisal of the classic forest succession paradigm with the shade tolerance index.

    Directory of Open Access Journals (Sweden)

    Jean Lienard

    Full Text Available In this paper we revisit the classic theory of forest succession that relates shade tolerance and species replacement and assess its validity to understand patch-mosaic patterns of forested ecosystems of the USA. We introduce a macroscopic parameter called the "shade tolerance index" and compare it to the classic continuum index in southern Wisconsin forests. We exemplify shade tolerance driven succession in White Pine-Eastern Hemlock forests using computer simulations and analyzing approximated chronosequence data from the USDA FIA forest inventory. We describe this parameter across the last 50 years in the ecoregions of mainland USA, and demonstrate that it does not correlate with the usual macroscopic characteristics of stand age, biomass, basal area, and biodiversity measures. We characterize the dynamics of shade tolerance index using transition matrices and delimit geographical areas based on the relevance of shade tolerance to explain forest succession. We conclude that shade tolerance driven succession is linked to climatic variables and can be considered as a primary driving factor of forest dynamics mostly in central-north and northeastern areas in the USA. Overall, the shade tolerance index constitutes a new quantitative approach that can be used to understand and predict succession of forested ecosystems and biogeographic patterns.

  7. Initial growth of Bauhinia variegata trees under different colored shade nets and light conditions

    Directory of Open Access Journals (Sweden)

    Renata Bachin Mazzini-Guedes

    2014-12-01

    Full Text Available Bauhinia variegata and B. variegata var. candida, commonly known as orchid trees, are small sized trees widely used for urban forestry and landscaping. Adult plants grow under full sun; in Brazil, however, seedlings are generally cultivated in commercial nurseries under natural half-shading. The objective of this study was to evaluate the influence of different colored shade nets and light conditions on the initial growth of B. variegata and B. variegata var. candida. The influence of six light conditions (red net with 50% shading; blue net with 50% shading; black net with 70% shading; black net with 50% shading; black net with 30% shading; and full sun on the initial growth of B. variegata and B. variegata var. candida were evaluated along 160 days, and growth relationships were calculated. Seedlings showed more efficiency on the use of photoassimilated compounds when grown under full sun. Such condition is the most appropriate for seedling production of B. variegata and B. variegata var. candida, contradicting what has been performed in practice.

  8. Response of Artemisia annua L. to shade and manure fertilizer application in lowland altitude

    Science.gov (United States)

    Permana, H. H.; Widyastuti, Y.; Samanhudi; Yunus, A.

    2018-03-01

    Artemisia is a plant producing artemisinin substance which is the main compound in the treatment of malaria. Artemisia comes from China, usually grows wild in native habitats in the plains with an altitude of 1,000-1,500 meters above the sea level. Artemisia development efforts in Indonesia hampered by limited land with the required altitude due to their competition with vegetable crops. Based on this reason, this research is conducted to observe the growth of artemisia planted in lowland with the help of shade and manure. This study aims to determine the level of shade and best manure on the growth of Artemisia. Research conducted at the Laboratory of the Faculty of Agriculture UNS Jumantono using nested design with two factors, shade as main factor and manure fertilizer as sub factor. The data analysis used F test with confidence level of 5%, if significant, then continued with DMRT (Duncan Multiple Range Test). The results showed the treatment of shade gave no difference in growth within 50% shade, 75% shade as well as without shade treatment. Goat manure fertilizer gave the highest result and able to increase plant height, number of branches, flower weight and root volume.

  9. Growth and bromatological characteristics of Brachiaria decumbens and Brachiaria ruziziensis under shading and nitrogen

    Directory of Open Access Journals (Sweden)

    Bruna Moscat Faria

    Full Text Available ABSTRACT This study aimed to evaluate the productive and qualitative characteristics of Brachiaria decumbens and Brachiaria ruziziensis subjected to three levels of artificial shading (0, 36 and 54% and four nitrogen (N doses (0; 50; 100 and 150 mg dm-3 soil, using completely randomized design with a factorial scheme 2 x 3 x 4, with three replications. The dry matter production (DMP, the number of tillers per pot, root weight and crude protein (CP and neutral detergent fiber (NDF contents were evaluated. Both grasses responded quadractly to N, but B. ruziziensis presented greater production under the two highest N doses. The tillers density increased with N dose and was reduced under shading. The root weight increased with N dose, linearly in the full sun and quadractly in the shade. The shading and N showed a positive influence on CP contents. For NDF content, was observed reduction with increase of N dose. The NDF content of B. decumbens increased with shading levels; for B. ruziziensis, the greatest value was observed under intermediate shading level. The N fertilization is an important strategy to improve DMP, tillers density and CP content, for both grasses. However, intense shading should be avoided, as it reduces tillering and root weight, which may threat pasture persistence.

  10. Application of a digital technique in evaluating the reliability of shade guides.

    Science.gov (United States)

    Cal, E; Sonugelen, M; Guneri, P; Kesercioglu, A; Kose, T

    2004-05-01

    There appears to be a need for a reliable method for quantification of tooth colour and analysis of shade. Therefore, the primary objective of this study was to show the applicability of graphic software in colour analysis and secondly to investigate the reliability of commercial shade guides produced by the same manufacturer, using this digital technique. After confirming the reliability and reproducibility of the digital method by using self-assessed coloured images, three shade guides of the same manufacturer were photographed in daylight and in studio environments with a digital camera and saved in tagged image file format (TIFF) format. Colour analysis of each photograph was performed using the Adobe Photoshop 4.0 graphic program. Luminosity, and red, green, blue (L and RGB) values of each shade tab of each shade guide were measured and the data were subjected to statistical analysis using the repeated measure Anova test. The L and RGB values of the images taken in daylight differed significantly from those of the images taken in studio environment (P < 0.05). In both environments, the luminosity and red values of the shade tabs were significantly different from each other (P < 0.05). It was concluded that, when the environmental conditions were kept constant, the Adobe Photoshop 4.0 colour analysis program could be used to analyse the colour of images. On the other hand, the results revealed that the accuracy of shade tabs widely being used in colour matching should be readdressed.

  11. Determining the energy performance of manually controlled solar shades: A stochastic model based co-simulation analysis

    International Nuclear Information System (INIS)

    Yao, Jian

    2014-01-01

    Highlights: • Driving factor for adjustment of manually controlled solar shades was determined. • A stochastic model for manual solar shades was constructed using Markov method. • Co-simulation with Energyplus was carried out in BCVTB. • External shading even manually controlled should be used prior to LOW-E windows. • Previous studies on manual solar shades may overestimate energy savings. - Abstract: Solar shading devices play a significant role in reducing building energy consumption and maintaining a comfortable indoor condition. In this paper, a typical office building with internal roller shades in hot summer and cold winter zone was selected to determine the driving factor of control behavior of manual solar shades. Solar radiation was determined as the major factor in driving solar shading adjustment based on field measurements and logit analysis and then a stochastic model for manually adjusted solar shades was constructed by using Markov method. This model was used in BCVTB for further co-simulation with Energyplus to determine the impact of the control behavior of solar shades on energy performance. The results show that manually adjusted solar shades, whatever located inside or outside, have a relatively high energy saving performance than clear-pane windows while only external shades perform better than regularly used LOW-E windows. Simulation also indicates that using an ideal assumption of solar shade adjustment as most studies do in building simulation may lead to an overestimation of energy saving by about 16–30%. There is a need to improve occupants’ actions on shades to more effectively respond to outdoor conditions in order to lower energy consumption, and this improvement can be easily achieved by using simple strategies as a guide to control manual solar shades

  12. Effect of Shading on Physiological, Biochemical and Behaviour Changes in Crossbred Calves Under Hot Climatic Conditions

    International Nuclear Information System (INIS)

    Teama, F.E.I.; Gad, A.E.; El-Tarabany, A.A.

    2012-01-01

    The purpose of this study was to investigate the importance and the effect of shading and non-shading house on physiological changes, body weight (BW), average daily gain (ADG), total antioxidant and thyroid hormones in crossbred calves under hot conditions. Thirty six growing crossbred calves (Friesian x Baladi) aged 8-10 months were divided into two groups (each 18 calves); the first group was maintained in shaded house and the second in house without shade (climatic house). The period of study was 79 days during hot conditions. Performance variables (BW, ADG) were measured and the blood samples were collected to assess some biochemical parameters including antioxidants such as total antioxidant (TA), catalase (CAT), total protein, thyroid hormones (T3, T4) and immunoglobulin factor (IgG). Respiration rates and behaviour parameters (feeding, drinking, standing, lying and agonistic) were also measured during the study. The data indicated that the shaded calves had higher ADG (P<0.05) and final BW than non-shaded ones. Also, a significant improvement in total protein levels and globulins were recorded in shaded house calves as compared to non-shaded ones. The same result was obtained for T3 level whereas non-significant changes were observed for T4 level as well as the level of IgG at different times. The present data indicated that using shaded house will decrease the effect of heat stress on calves which will increase the animal performance through improving BW and ADG as well as some biochemical parameters in addition to T3 hormonal level.

  13. Integrated control of sun shades, daylight and artificial light; Integreret regulering af solafskaermning, dagslys og kunstlys

    Energy Technology Data Exchange (ETDEWEB)

    Johnsen, K.; Christoffersen, J.; Soerensen, Henrik; Jessen, G.

    2011-07-01

    The project established a basis of calculation and a practical basis for optimum choice of solar shading and integrated control strategies for both new buildings and for office, commercial and institutional buildings to be renovated with new calculation models for controlling solar shading integrated in the BSim program. A complete and applicable model for optimum, integrated solar shading control was established, focusing on thermal and visual comfort criteria towards energy consumption for heating, cooling and lighting. A prototype was tested in the daylight laboratory at Danish Building Research Institute-Aalborg University and at University of Southern Denmark. (LN)

  14. SRTM Colored Height and Shaded Relief: Corral de Piedra, Argentina

    Science.gov (United States)

    2001-01-01

    Volcanism and erosion are prominently seen in this view of the eastern flank of the Andes Mountains taken by Shuttle Radar Topography Mission (SRTM). The area is southeast of San Martin de Los Andes, Argentina. Eroded peaks up to 2,210-meter-high (7,260-foot) are seen on the west (left), but much of the scene consists of lava plateaus that slope gently eastward. These lava flows were most likely derived from volcanic sources in the high mountains. However, younger and more localized volcanic activity is evident in the topographic data as a cone surrounding oval-shaped flow near the center of the scene.The plateaus are extensively eroded by the Rio Limay (bottom of the image) and the Rio Collon Cura and its tributaries (upper half). The larger stream channels have reached a stable level and are now cutting broad valleys. Few terraces between the levels of the high plateaus and lower valleys (bottom center and upper right of the volcanic cone) indicate that stream erosion had once temporarily reached a higher stable level before eroding down to its current level. In general, depositional surfaces like lava flows are progressively younger with increasing elevation, while erosional surfaces are progressively younger with decreasing elevation.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark, as would be the case at noon at this latitude in the southern hemisphere. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red and magenta to white at the highest elevations.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging

  15. SRTM Colored Height and Shaded Relief: Pinon Canyon region, Colorado

    Science.gov (United States)

    2001-01-01

    Erosional features are prominent in this view of southern Colorado taken by the Shuttle Radar Topography Mission (SRTM). The area covers about 20,000 square kilometers and is located about 50 kilometers south of Pueblo, Colorado. The prominent mountains near the left edge of the image are the Spanish Peaks, remnants of a 20 million year old volcano. Rising 2,100 meters (7,000 ft) above the plains to the east, these igneous rock formations with intrusions of eroded sedimentary rock historically served as guiding landmarks for travelers on the Mountain Branch of the Santa Fe Trail.Near the center of the image is the Pinon Canyon Maneuver Site, a training area for soldiers of the U.S. Army from nearby Fort Carson. The site supports a diverse ecosystem with large numbers of big and small game, fisheries, non-game wildlife, forest, range land and mineral resources. It is bounded on the east by the dramatic topography of the Purgatoire River Canyon, a 100 meter (328 foot) deep scenic red canyon with flowing streams, sandstone formations, and exposed geologic processes.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction. Southern slopes appear bright and northern slopes appear dark. Color coding is directly related to topographic height, with blue and green at the lower elevations, rising through yellow and brown to white at the highest elevations.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR)that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter

  16. Shaded Relief with Height as Color, Iturralde Structure, Bolivia

    Science.gov (United States)

    2002-01-01

    An 8-kilometer (5-mile) wide crater of possible impact origin is shown in this view of an isolated part of the Bolivian Amazon from the Shuttle Radar Topography Mission. The circular feature at the center-left of the image, known as the Iturralde Structure, is possibly the Earth's most recent 'big' impact event recording collision with a meteor or comet that might have occurred between 11,000 and 30,000 years ago.Although the structure was identified on satellite photographs in the mid-1980s, its location is so remote that it has only been visited by scientific investigators twice, most recently by a team from NASA's Goddard Space Flight Center in September 2002. Lying in an area of very low relief, the landform is a quasi-circular closed depression only about 20 meters (66 feet) in depth, with sharply defined sub-angular 'rim' materials. It resembles a 'cookie cutter' in that its appearance 'cuts' the heavily vegetated soft-sediments and pampas of this part of Bolivia. The SRTM data have provided investigators with the first topographic map of the site and will allow studies of its three-dimensional structure crucial to determining whether it actually is of impact origin.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction. North-facing slopes appear bright and south-facing slopes appear dark. Color coding is directly related to topographic height, with brown and green at the lower elevations, rising through yellow and brown to white at the highest elevations.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission aboard Space Shuttle Endeavour, launched on Feb. 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on Endeavour in 1994. The Shuttle Radar Topography Mission was

  17. Pando Province, Northern Bolivia, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    Pando Province, Bolivia, and adjacent parts of Brazil and Peru are seen in this visualization of Shuttle Radar Topography Mission (SRTM) elevation data covering part of the Amazon Basin. Most of this region is covered by tropical rainforest and is still largely unaltered by development, though new roads are providing increased access to the area, leading to changes in the landscape. SRTM data provide the first detailed three-dimensional look at the landforms of this region, and the Amazon Basin in its entirety, and will be particularly helpful in understanding the hydrologic patterns as environmental management becomes increasingly important.River drainage across this area flows generally east-northeast away from the nearby Andes Mountains. The most prominent river channels seen here are the Purus River in the northwest (upper left) and the Madre de Dios River, which crosses the south central (lower central) part of this view. The Beni and Mamore Rivers combine with the Madre de Dios in the eastern (right central) area to form the Madeira River, which flows northeast to eventually meet the Amazon River near Manaus.The Trans-Amazon Highway crosses the northern half of the scene, and subtle evidence of rainforest clear cutting, facilitated by this easy access, is apparent just north of the scene center, even at the low resolution of this display (740 m or 2428 feet). As seen here, clear cutting patterns in the rainforest typically show a pattern of parallel lines. SRTM mapped the shape of the Earths solid surface (not exclusively the ground surface), which includes to some degree land covers such as forests. Thus, SRTM data are capable of revealing deforestation patterns.For a smaller, annotated version of this image, please select Figure 1, below: [figure removed for brevity, see original site] (image size: 184k JPEG)A combination of visualization methods was used to produce this image, based on shading and color coding. A shade image was derived by computing

  18. Cuttlefish see shape from shading, fine-tuning coloration in response to pictorial depth cues and directional illumination.

    Science.gov (United States)

    Zylinski, Sarah; Osorio, D; Johnsen, Sonke

    2016-03-16

    Humans use shading as a cue to three-dimensional form by combining low-level information about light intensity with high-level knowledge about objects and the environment. Here, we examine how cuttlefish Sepia officinalis respond to light and shadow to shade the white square (WS) feature in their body pattern. Cuttlefish display the WS in the presence of pebble-like objects, and they can shade it to render the appearance of surface curvature to a human observer, which might benefit camouflage. Here we test how they colour the WS on visual backgrounds containing two-dimensional circular stimuli, some of which were shaded to suggest surface curvature, whereas others were uniformly coloured or divided into dark and light semicircles. WS shading, measured by lateral asymmetry, was greatest when the animal rested on a background of shaded circles and three-dimensional hemispheres, and less on plain white circles or black/white semicircles. In addition, shading was enhanced when light fell from the lighter side of the shaded stimulus, as expected for real convex surfaces. Thus, the cuttlefish acts as if it perceives surface curvature from shading, and takes account of the direction of illumination. However, the direction of WS shading is insensitive to the directions of background shading and illumination; instead the cuttlefish tend to turn to face the light source. © 2016 The Author(s).

  19. San Gabriel Mountains, California, Shaded relief, color as height

    Science.gov (United States)

    2000-01-01

    This topographic image shows the relationship of the urban area of Pasadena, California to the natural contours of the land. The image includes the alluvial plain on which Pasadena and the Jet Propulsion Laboratory sit, and the steep range of the San Gabriel Mountains. The mountain front and the arcuate valley running from upper left to the lower right are active fault zones, along which the mountains are rising. The chaparral-covered slopes above Pasadena are also a prime area for wildfires and mudslides. Hazards from earthquakes, floods and fires are intimately related to the topography in this area. Topographic data and other remote sensing images provide valuable information for assessing and mitigating the natural hazards for cities along the front of active mountain ranges.This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Colors show the elevation as measured by SRTM. Colors range from blue at the lowest elevations to white at the highest elevations. This image contains about 2300 meters (7500 feet) of total relief. White speckles on the face of some of the mountains are holes in the data caused by steep terrain. These will be filled using coverage from an intersecting pass.The Shuttle Radar Topography Mission (SRTM), launched on February 11,2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna

  20. Shaded Relief with Height as Color, Mount Meru, Tanzania

    Science.gov (United States)

    2002-01-01

    Mount Meru is an active volcano located just 70 kilometers (44 miles) west of Mount Kilimanjaro. It reaches 4,566 meters (14,978 feet) in height but has lost much of its bulk due to an eastward volcanic blast sometime in its distant past, perhaps similar to the eruption of Mount Saint Helens in Washington State in 1980. Mount Meru most recently had a minor eruption about a century ago. The several small cones and craters seen in the vicinity probably reflect numerous episodes of volcanic activity. Mount Meru is the topographic centerpiece of Arusha National Park. Its fertile slopes rise above the surrounding savanna and support a forest that hosts diverse wildlife, including nearly 400 species of birds, and also monkeys and leopards.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark, as would be the case at noon at this latitude in June. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to blue and white at the highest elevations.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space

  1. Influence of artificial accelerated aging on the color stability and opacity of composites of different shades.

    Science.gov (United States)

    Mundim, F M; Da Fonseca Roberti Garcia, L; Silva Sousa, A B; Cruvinel, D R; De Carvalho Panzeri Pires-De-Souza, F

    2010-10-01

    The aim of this study was to evaluate the influence of artificial accelerated aging on the color stability and opacity of composites of different shades. Four composites for direct use (Heliomolar, 4 Seasons, Tetric EvoCeram; QuiXfil) and one for indirect use (SR Adoro) in two shades were used: light (A2) and dark (C3 for direct, and D4 for indirect composite). QuiXfil was obtained in Universal shade. A Teflon matrix (12 X 2 mm) was used to obtain 54 specimens (N=6), which were submitted to color and opacity analysis (Spectrophotometer PCB 6807, Byk Gardner) before and after artificial accelerated aging for 384 hours. After the statistical analysis (2-way ANOVA - Bonferroni - PArtificial accelerated aging interfered in the optical properties assessed; however, the alterations seemed to be more related to the composites composition than to their shade.

  2. Differences between the human eye and the spectrophotometer in the shade matching of tooth colour.

    Science.gov (United States)

    Gómez-Polo, Cristina; Gómez-Polo, Miguel; Celemin-Viñuela, Alicia; Martínez Vázquez De Parga, Juan Antonio

    2014-06-01

    The aim of this work was to assess the agreement between instrumental and visual colour matching. Shade selection with the 3DMaster Toothguide (Vita-Zahnfabrik) was performed for 1361 maxillary central incisors and compared with the shade obtained with the EasyShade Compact (Vita-Zahnfabrik) spectrophotometer. We observed a greater correlation between the objective method and the subjective one in the colour dimension of lightness (Kappa 0.6587), followed by hue (Kappa 0.4337) and finally chroma (Kappa 0.3578). The colour dimension in which the greatest agreement is seen between the operator and the spectrophotometer is value or lightness. This study reveals differences between the measurement of colour via spectrophotometry and the visual shade selection method. According to our results, there is better agreement in the value or lightness colour dimension, which is the most important one in the choice of tooth colour. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Effect of shade on various parameters of Friesian cows in a ...

    African Journals Online (AJOL)

    Keywords: Behavioural pattern , dairy cows, heat stress, shade. * Author to whom ... The negative effect of high temperatures, solar radiation, relative humidity and ..... Cattle do nct exhibit true sleep as in humans, except for very short periods.

  4. Duration and intensity of shade differentially affects mycorrhizal growth- and phosphorus uptake responses of Medicago truncatula

    Czech Academy of Sciences Publication Activity Database

    Konvalinková, T.; Püschel, David; Janoušková, Martina; Gryndler, M.; Jansa, J.

    2015-01-01

    Roč. 6, FEB 13 (2015), s. 1-11 ISSN 1664-462X Institutional support: RVO:67985939 Keywords : arbuscular mycorrhizal symbiosis * light intensity * shading duration Subject RIV: EE - Microbiology, Virology Impact factor: 4.495, year: 2015

  5. Comparison of shade matching by visual observation and an intraoral dental colorimeter.

    Science.gov (United States)

    Li, Q; Wang, Y N

    2007-11-01

    The purpose of this study was to compare the applicability of two shade-matching approaches: Vintage Halo shade guide (visual method) and Shofu ShadeEye NCC colorimeter (instrumental method). Twenty participants' maxillary left central incisors were evaluated. Corresponding metal ceramic crowns were fabricated with each shade-matching approach. The colour distributions (L*, a* and b*) of the middle third region of each tooth and corresponding metal ceramic crowns were spectrophotometrically assessed. The colour difference (DeltaE) and colour distributions (DeltaL*, Deltaa* and Deltab*) between the tooth and the corresponding crowns were calculated. We found that the colour differences of both groups fell within the clinical unacceptable range (DeltaE > 2.75). Regarding DeltaE and the three colour distributions, no significant difference was found, expect for a* (P colorimeter nor the visual approach. However, the colorimeter can achieve better results within easy matching cases.

  6. [Effects of shading on two Sphagnum species growth and their interactions].

    Science.gov (United States)

    Ma, Jin-Ze; Bu, Zhao-Jun; Zheng, Xing-Xing; Li, Shan-Lin; Zeng, Jing; Zhao, Gao-Lin

    2012-02-01

    Taking Sphagnum palustre and S. fallax as test materials, this paper studied their growth and interactions under shading. In monoculture, shading promoted the height growth of S. palustre markedly, but had no effect on the growth of S. fallax and the biomass and branching of S. palustre. In mixed culture, S. fallax suppressed the increase of biomass and branching of S. palustre, while S. palustre had no effects on S. fallax. With the increase of shading stress, the competition of neighbour on S. fallax intensified. When the stress increased further, neighbor effect on S. fallax tended to be positive. However, the effect of neighbour on S. palustre was always competitive and did not change with the increase of shading stress.

  7. Daylight Adaptive Shading Using Parametric Camshaft Mechanism for SOHO in Jakarta

    Directory of Open Access Journals (Sweden)

    Sjarifudin Firza Utama

    2014-03-01

    Full Text Available This research analyzes SOHO (Small Office Home Office which can adjust to the need of visual comfort for the users through natural daylighting and also can be adapted to standard requirements of 14 creative industry workspace in Jakartas. The method of the research is by simulating the SOHO unit with variation of shading opening angles in order to adapt to each unit. Analysis done to every shading opening angle to get the appropriate daylight intensity level which support the work activities in every unit for the whole day. In order for the shading to be able to adapt to the changing daylight condition, previously developed parametric camshaft mechanism was used. The study found that the visual comfort for SOHO with creative industries workers in Jakarta can be achieve by varying the shading opening angles between 15-75°.

  8. Is shade for horses a comfort resource or a minimum requirement?

    Science.gov (United States)

    Holcomb, K E

    2017-09-01

    Shade or shelter as protection from extremes of weather is required for horses at agricultural research and teaching facilities and is recommended or required by many states, professional organizations, and industry groups. The focus of this paper is the recent research on the responses of horses to hot, sunny weather, which has begun to provide scientific evidence that characterizes how and when shade is used and any benefits shade confers on horses. These behavioral and physiological findings support provision of shade as a resource for thermal comfort and the expression of normal behavior that should be included as a standard of best care practices for healthy adult horses living in the environmental conditions reviewed, rather than an absolute minimum care requirement. Additional research is required for horses living under other environmental conditions, for very young or old horses, horses in very poor body condition, or those with compromised health to determine if their responses to hot, sunny weather differ from those presented here.

  9. Photosynthetic light response of the C4 grasses Brachiaria brizantha and B. humidicola under shade

    Directory of Open Access Journals (Sweden)

    Dias-Filho Moacyr Bernardino

    2002-01-01

    Full Text Available Forage grasses in tropical pastures can be subjected to considerable diurnal and seasonal reductions in available light. To evaluate the physiological behavior of the tropical forage grasses Brachiaria brizantha cv. Marandu and B. humidicola to low light, the photosynthetic light response and chlorophyll contents of these species were compared for plants grown outdoors, on natural soil, in pots, in full sunlight and those shaded to 30 % of full sunlight, over a 30-day period. Both species showed the ability to adjust their photosynthetic behavior in response to shade. Photosynthetic capacity and light compensation point were lower for shade plants of both species, while apparent quantum yield was unaffected by the light regime. Dark respiration and chlorophyll a:b ratio were significantly reduced by shading only in B. humidicola. B. humidicola could be relatively more adapted to succeed, at least temporarily, in light-limited environments.

  10. Effect of shade on various parameters of Friesian cows in a ...

    African Journals Online (AJOL)

    The effect of a shade structure on the feed intake, water intake, milk production and milk composition of Dutch-type ... balance of an animal but does not affect air temperature or .... temperature above this temperature limits reproductive.

  11. Effects of shade and drought stress on soybean hormones and yield ...

    African Journals Online (AJOL)

    Jane

    2011-10-24

    Oct 24, 2011 ... hormone concentrations, main-stem and branch yield response to the combination of shade and drought were studied ... yield primarily by reducing branch growth and branch seed yield per ..... deficit soybean. Yield decrease ...

  12. Black howler monkey (Alouatta pigra) activity, foraging and seed dispersal patterns in shaded cocoa plantations versus rainforest in southern Mexico.

    Science.gov (United States)

    Zárate, Diego A; Andresen, Ellen; Estrada, Alejandro; Serio-Silva, Juan Carlos

    2014-09-01

    Recent evidence has shown that primates worldwide use agroecosystems as temporary or permanent habitats. Detailed information on how these primates are using these systems is scant, and yet their role as seed dispersers is often implied. The main objective of this study was to compare the activity, foraging patterns and seed dispersal role of black howler monkeys (Alouatta pigra) inhabiting shaded cocoa plantations and rainforest in southern Chiapas, Mexico. We gathered data on three monkey groups living in shaded cocoa plantations and three groups living in rainforest, using focal sampling, and collecting fecal samples. General activity and foraging patterns were similar in both habitats, with the exception that monkeys in the cocoa habitat spent more time feeding on petioles. Monkeys in shaded cocoa plantations dispersed 51,369 seeds (4% were seeds ≥3 mm width) of 16 plant species. Monkeys in the rainforest dispersed 6,536 seeds (78% were seeds ≥3 mm width) of 13 plant species. Our data suggest that the difference between habitats in the proportion of large versus small seeds dispersed reflects differences in fruit species abundance and availability in cocoa versus forest. Mean seed dispersal distances were statistically similar in both habitats (cocoa = 149 m, forest = 86 m). We conclude that the studied cocoa plantations provide all elements necessary to constitute a long-term permanent habitat for black howler monkeys. In turn, howler monkeys living in these plantations are able to maintain their functional role as seed dispersers for those native tree and liana species present within their areas of activities. © 2014 Wiley Periodicals, Inc.

  13. Impact of shading on daylight quality. Simulations with radiance

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, M.C.

    2001-07-01

    The impact of six exterior shading devices on daylight quality and on the potential for daylight utilisation in a standard, south-oriented office room was investigated through computer simulations with Radiance. The daylight quality was evaluated by considering four performance indicators: the absolute work plane illuminance, the illuminance uniformity on the work plane, the absolute luminance in the visual field and the luminance ratios between the work plane, VDT screen and surrounding surfaces. The results indicate that the overhang, white awning and horizontal venetian blind generated work plane illuminance levels that are more suitable for offices where traditional tasks are carried out. However, these devices did not prevent high luminance values at the window. On the other hand, the grey specular screen produced unacceptably low work plane illuminance, poor illuminance uniformity and unacceptably low luminance levels which resulted in unsuitable luminance ratios between the VDT screen, work plane and surroundings. The 45 deg venetian blind, white screen and blue awning provided work plane illuminance levels suitable for offices where a combination of paper and computer work is carried out. They also provided acceptable illuminance uniformity on the work plane, suitable luminance ratios between the work plane, VDT screen and surroundings and they significantly reduced the luminance of the window. However, the blue awning had a poorer performance in December than in June and the white screen resulted in high luminance values at the window, which indicates that the best device among the ones studied was the 45 deg venetian blind.

  14. Response of lentil (Lens culinaris Medik.) to artificial shading during the reproductive stage

    International Nuclear Information System (INIS)

    Peñaloza H, Enrique; Díaz S, Jorge

    1997-01-01

    Lentil production in southern Chile is subject to significant seasonal fluctuations in solar radiation received during the reproductive stage, with an average variation ranging from 300 to 650 g cal cm -2 day -1 . to quantify the effect of reducing incident light on crop performance, artifical shading experiments were conducted with 80% light reduction during different periods spanning the reprodcutive stage, as well as various degrees of shading (0, 20, 35, 50 and 80%) throughout. shading was achieved by using a black polypropylene net placed at 0.8 m above soil surface. The experiments were carried out during the 1991/92, 1992/93 and 1993/94 cropping seasons at the Centro Regional de Investigación Carillanca, INIA (38°41' S, 72°25' W). The effect of 80% shading on seed yield was dependent upon the period at which the treatment was imposed. Seed yield reduction was higher when shading occurred during the growth stages R--R5, accounting 35, 48 and 59% yield losses for the 1991/92, 1992/93 and 1993/94 seasons, respectively. No significant diffreences were detected between R1-R3 and R5-R8 periods, with seed yield losses averaging 39 (1991/92), 10 (1992/93) and 25% (1993/94). Variations in seed yield due to shading were explained mainly by a reduction of total pods m -2 and an increase in empty (flat) pods (R3-R5), and a reduction on the average seed weight (R5-R8). As expected, the higher losses occurred on treatments exposed to two (R1-R5, R3-R8) or three (R1-R8) periods of shading. Grain yield under different degrees of shading was significantly reduced, with responses fitted to the functions Y = 2.020-32.5s + 0.18s 2 (1992/93) and Y = 2.172-25.6s-0.04s 2 (1993/94). Reduction on seed yield was associated to a decrease in total pods m -2 and average seed weight, whereas empty pods increased significantly only at near 80% shading. These results point at R3-R5 as the most sensible growth stage under 80% shading and demonstrate the sensitiveness of lentil

  15. Performance assessment of Vita Easy Shade spectrophotometer on colour measurement of aesthetic dental materials.

    Science.gov (United States)

    AlGhazali, N; Burnside, G; Smith, R W; Preston, A J; Jarad, F D

    2011-12-01

    Four different shades were used to produce 20 samples of resin-based composite and 20 samples of porcelain to evaluate the performance ability of an intra oral test spectrophotometer compared to a reference spectrophotometer. The absolute colour coordinates CIELAB values measured with both spectrophotometers were significantly different (p spectrophotometers (p < 0.05). Therefore, the Easy Shade can be used in dental practice and dental research with some limitations.

  16. Photosynthesis and chlorophyll fluorescence reaction to different shade stresses of weak light sensitive maize

    International Nuclear Information System (INIS)

    Wang, J.; Li, F.; Shi, Z.; Huang, H.; Jia, S.

    2017-01-01

    A split-plot experimental study was conducted to evaluate the effect of different shade stresses on photosynthesis and chlorophyll fluorescence of maize leaves.The experiment was designed on the south farm of Special Corn Institute, Shenyang Agricultural University, China.Data was collected from the day maize tasseled (Jul. 21) to the beginning of grouting (Aug.12 ) under 18%, 28%, 38%, 60%, and 75% shade stress to determine indexes such as photosynthesis and chlorophyll fluorescence after 15 days of shade treatment. Pairs of near-isogenic lines (NILs) of Shennong 98A (a barren stalk inbred line) and Shennong 98B (an un-barren stalk inbred line) were used as experimental materials to further reveal photosynthetic mechanisms of weak light sensitive maize when exposed to weak light conditions. Thus, a foundation was established for high density-resistant (shade resistant) corn breeding,while identifying weak light sensitive varieties. After shading treatment, chlorophyll a and total chlorophyll content of both varieties increased, chlorophyll b content first increased, followed by a decrease, while the net photosynthetic rate and stomatal conductance showed a gradually decreasing trend. The changing trends of photochemical quenching coefficient(qp) and effective quantum yield of PSII photochemistry (FPSII)were similar, FPSII and qP increased significantly as shading stress increased from 18% to 38%;however, FPSII and qP declined significantly under 60% and 75% shading stresses. The changing trend of NPQ was opposite to FPSII and qP. A comparison of both inbred lines showed that photosynthesis and chlorophyll fluorescence characteristics of Shennong 98B were superior to Shennong 98A. This study revealed the relationships between weak light sensitive lines and shade intensities by comparing differences in photosynthesis and chlorophyll fluorescence parameters. (author)

  17. Is shade beneficial for mediterranean shrubs experiencing periods of extreme drought and late-winter frosts?

    Science.gov (United States)

    Valladares, Fernando; Zaragoza-Castells, Joana; Sánchez-Gómez, David; Matesanz, Silvia; Alonso, Beatriz; Portsmuth, Angelika; Delgado, Antonio; Atkin, Owen K

    2008-12-01

    Plants are naturally exposed to multiple, frequently interactive stress factors, most of which are becoming more severe due to global change. Established plants have been reported to facilitate the establishment of juvenile plants, but net effects of plant-plant interactions are difficult to assess due to complex interactions among environmental factors. An investigation was carried out in order to determine how two dominant evergreen shrubs (Quercus ilex and Arctostaphylos uva-ursi) co-occurring in continental, Mediterranean habitats respond to multiple abiotic stresses and whether the shaded understorey conditions ameliorate the negative effects of drought and winter frosts on the physiology of leaves. Microclimate and ecophysiology of sun and shade plants were studied at a continental plateau in central Spain during 2004-2005, with 2005 being one of the driest and hottest years on record; several late-winter frosts also occurred in 2005. Daytime air temperature and vapour pressure deficit were lower in the shade than in the sun, but soil moisture was also lower in the shade during the spring and summer of 2005, and night-time temperatures were higher in the shade. Water potential, photochemical efficiency, light-saturated photosynthesis, stomatal conductance and leaf 13C composition differed between sun and shade individuals throughout the seasons, but differences were species specific. Shade was beneficial for leaf-level physiology in Q. ilex during winter, detrimental during spring for both species, and of little consequence in summer. The results suggest that beneficial effects of shade can be eclipsed by reduced soil moisture during dry years, which are expected to be more frequent in the most likely climate change scenarios for the Mediterranean region.

  18. Representasi Perempuan Dalam Film (Analisis Semiotika Representasi Perempuan Dalam Film “Fifty Shades of Grey”)

    OpenAIRE

    Aviomeita, Friska

    2016-01-01

    This study entitled "Representation of Women In Film ( Roland Barthes Semiotics Analysis In the film Fifty Shades of Grey ) " . The purpose of this study to find out how women are represented in the film " Fifty Shades of Grey " by denotation , connotation and myths . Film has always influenced and shaped the public based on the contents of the message behind it. Messages or values contained in the film may affect the audience. In this study, researchers used several theorie...

  19. In vitro and in vivo evaluations of three computer-aided shade matching instruments.

    Science.gov (United States)

    Yuan, Kun; Sun, Xiang; Wang, Fu; Wang, Hui; Chen, Ji-hua

    2012-01-01

    This study evaluated the accuracy and reliability of three computer-aided shade matching instruments (Shadepilot, VITA Easyshade, and ShadeEye NCC) using both in vitro and in vivo models. The in vitro model included the measurement of five VITA Classical shade guides. The in vivo model utilized three instruments to measure the central region of the labial surface of maxillary right central incisors of 85 people. The accuracy and reliability of the three instruments in these two evaluating models were calculated. Significant differences were observed in the accuracy of instruments both in vitro and in vivo. No significant differences were found in the reliability of instruments between and within the in vitro and the in vivo groups. VITA Easyshade was significantly different in accuracy between in vitro and in vivo models, while no significant difference was found for the other two instruments. Shadepilot was the only instrument tested in the present study that showed high accuracy and reliability both in vitro and in vivo. Significant differences were observed in the L*a*b* values of the 85 natural teeth measured using three instruments in the in vivo assessment. The pair-agreement rates of shade matching among the three instruments ranged from 37.7% to 48.2%, and the incidence of identical shade results shared by all three instruments was 25.9%. As different L*a*b* values and shade matching results were reported for the same tooth, a combination of the evaluated shade matching instruments and visual shade confirmation is recommended for clinical use.

  20. Power Enhancement of Partial Shaded PV Array by Optimizing the Electrical Connection of Module

    Directory of Open Access Journals (Sweden)

    Wang Mengyao

    2015-01-01

    Full Text Available The maximum output power (Pmax generated from photovoltaic (PV array will be apparently reduced if the array is partially shaded. In order to enhance Pmax generated from partial shaded PV array, several interconnection schemes of array are proposed. Among these schemes, the totally cross tied (TCT scheme and the recently proposed static scheme are widely discussed. It was reported that Pmax produced with static scheme is equal to the TCT scheme even under worst conditions. However, in these simulations the illumination of every single module is assumed to be uniform, but in urban environments the illumination of modules on the edge of shadow is more likely to be non-uniform. In this paper, first, a comprehensive circuit-level simulation, which is implemented in PSpice, has been done to investigate performance of PV array with both TCT scheme and static scheme under different partial shading conditions. And the results show that Pmax generated from static scheme is higher than that form TCT scheme if the illumination of every single module is uniform, however if some modules are partially shaded, the Pmax with static scheme is more likely less than that with TCT scheme. Then, the electrical connection of a module is improved for the purpose of enhancing Pmax under partial shading conditions in which some modules in the array are partially shaded. And the simulation results show that Pmax is apparently increased by employing the improved modules.

  1. SHADING AND SUBSTRATE ON THE PRODUCTION OF SEEDLINGS OF Erythrina velutina Willd.

    Directory of Open Access Journals (Sweden)

    Laércio Wanderley dos Santos

    2013-12-01

    Full Text Available http://dx.doi.org/10.5902/1980509812341Erythrina velutina Willd. (Fabaceae is used in traditional medicine in northeastern Brazil for its sudorificproperties, soothing, emollient, pectoral and local anesthetic. The aim of this study was to evaluate theeffect of substrate and shading on seedlings of Erythrina velutina. The experimental design was completelyrandomized in factorial scheme 5 x 2 (five substrates and two shades, with four replications and 10 plantsin each plot. The substrates were arisco, arisco + cattle manure 2:1 v/v, arisco + cattle manure 3:1 v/v, sand+ cattle manure 2:1 v/v, sand + cattle manure 3:1 v/v. The shadings were 0% shading (full sunlight and50% shading. The characteristics evaluated were stem diameter, height, leaf area, green and dry biomass ofroots and shoots, height/diameter and Dickson quality index.There was no significant difference in diameterbetween the different substrates. The environment in full sun favored the diameter and the root biomasswhereas the height was favored by shade. The substrates with cattle manure in its composition favorsthe development of plants of Erythrina velutina and higher seedling quality are produced in full sun andsubstrate arisco + cattle manure in the ratio 2:1

  2. A Pareto-based multi-objective optimization algorithm to design energy-efficient shading devices

    International Nuclear Information System (INIS)

    Khoroshiltseva, Marina; Slanzi, Debora; Poli, Irene

    2016-01-01

    Highlights: • We present a multi-objective optimization algorithm for shading design. • We combine Harmony search and Pareto-based procedures. • Thermal and daylighting performances of external shading were considered. • We applied the optimization process to a residential social housing in Madrid. - Abstract: In this paper we address the problem of designing new energy-efficient static daylight devices that will surround the external windows of a residential building in Madrid. Shading devices can in fact largely influence solar gains in a building and improve thermal and lighting comforts by selectively intercepting the solar radiation and by reducing the undesirable glare. A proper shading device can therefore significantly increase the thermal performance of a building by reducing its energy demand in different climate conditions. In order to identify the set of optimal shading devices that allow a low energy consumption of the dwelling while maintaining high levels of thermal and lighting comfort for the inhabitants we derive a multi-objective optimization methodology based on Harmony Search and Pareto front approaches. The results show that the multi-objective approach here proposed is an effective procedure in designing energy efficient shading devices when a large set of conflicting objectives characterizes the performance of the proposed solutions.

  3. The effect of partial shading on dye-sensitized solar cell module characteristics

    International Nuclear Information System (INIS)

    Pan, Bin; Weng, Jian; Chen, Shuanghong; Huang, Yang; Dai, Songyuan

    2014-01-01

    The dye-sensitized solar cell (DSC) is a kind of novel solar cell with prospects for building integrated photovoltaic applications. In some situations, a DSC module may work under partial shading conditions, and subsequently the module temperature and I–V characteristics change. In this work, the effect of partial shading on DSC module characteristics is experimentally studied and the temperature and electric output of the partially shaded DSC module are measured. The variations of module temperature and output performance are analyzed under short circuit conditions and a normal operating mode of charging battery. Furthermore, the stability of the partially shaded DSC module is also evaluated. It is found that the temperature rise of the DSC module caused by partial shading is slower and much smaller than the silicon solar cell, and the characteristics of the single DSC that suffered from short-term shading remain stable. For a DSC module operating in charging mode, the maximum power point and working point change when a shadow appears. (paper)

  4. Tracing of shading effect on underachieving SPV cell of an SPV grid using wireless sensor network

    Directory of Open Access Journals (Sweden)

    Vivek Kaundal

    2015-09-01

    Full Text Available The environmental and economic merits of converting solar energy into electricity via photovoltaic cells have led to its enormous growth in this sector. Besides material and design parameters, there are many other factors which locally affect Photovoltaic cell like partial shading, humidity, dust, bird droppings, air velocity etc. However, the effect due to a single solar photo voltaic cell being connected to a serial or parallel network (to form a grid has never been deliberated extensively. In this paper a system design that will detect the underperforming panel in the entire grid is proposed and validated. All the Photo voltaic panels in a grid are connected with current sensors, which are connected to microcontrollers and these microcontrollers are locally connected with the wireless sensor network. With the help of wireless sensor network, grid monitoring for individual panel has been achieved for the first time with proposed system. The grid and control room is also connected wirelessly which enables the engineer monitoring the grid to meticulously locate the individual solar photovoltaic cell which is underachieving and solve the issue pertaining the same. The proposed system design has been validated with the help of data obtained with Centre for Wind Energy Technology (CWET, Govt. of India.”.

  5. Effect of shading nets on the production and quality of blueberry fruit (Vaccinium corymbosum L. cv. Brigitta

    Directory of Open Access Journals (Sweden)

    Mario Marcelo Rodríguez Beraud

    2015-03-01

    Full Text Available Growth, development and fruit quality blueberry (Vaccinium corymbosum L. variety Brigitta under different shade nets were evaluated. Assays were performed in plants 7 years in a commercial orchard Collipulli, Araucanía Region, Chile. Treatments were a control without shading and four types of screens: a red 40% and 18% shade; aluminized mesh with 40% shade and a black mesh 35% shade. In fruits shade of red mesh 40% greater equatorial and polar diameter were observed and three weeks later harvested the fruits of treatment without mesh. In growing shade 40% aluminized mesh phenological stages extension lag and the maximum weekly production two weeks over control was observed. The highest yields were observed in plants of treatment and control shade of red mesh 40%, with 11008 kg ha-1 and 10461 kg ha-1, respectively, while the lowest was in red mesh 18% with 9668 kg ha-1. The fruits grown under shade of red mesh 18% showed the highest number of fruits per plant with 1806 berries per plant, fruit weight less than 1.69 g with the strongest with 3.76 N mm-1 module deformability. Therefore, the largest weight berry fruits observed in non-mesh screen and 40% red shading, together with the increased size and performance.

  6. Development of a formalism of movable cellular automaton method for numerical modeling of fracture of heterogeneous elastic-plastic materials

    Directory of Open Access Journals (Sweden)

    S. Psakhie

    2013-04-01

    Full Text Available A general approach to realization of models of elasticity, plasticity and fracture of heterogeneous materials within the framework of particle-based numerical methods is proposed in the paper. It is based on building many-body forces of particle interaction, which provide response of particle ensemble correctly conforming to the response (including elastic-plastic behavior and fracture of simulated solids. Implementation of proposed approach within particle-based methods is demonstrated by the example of the movable cellular automaton (MCA method, which integrates the possibilities of particle-based discrete element method (DEM and cellular automaton methods. Emergent advantages of the developed approach to formulation of many-body interaction are discussed. Main of them are its applicability to various realizations of the concept of discrete elements and a possibility to realize various rheological models (including elastic-plastic or visco-elastic-plastic and models of fracture to study deformation and fracture of solid-phase materials and media. Capabilities of particle-based modeling of heterogeneous solids are demonstrated by the problem of simulation of deformation and fracture of particle-reinforced metal-ceramic composites.

  7. Successive Transfers Relating to Movable Tangible Assets and Acquisition of Property under Article 937, Paragraph (1 of the Civil Code

    Directory of Open Access Journals (Sweden)

    Mara Ioan

    2015-12-01

    Full Text Available Apparently article 1275, paragraph (1 of the Civil Code covers all situations that may arise in practice, without making a distinction for the constituent or transferring contracts if they are of the same or of different nature. However, we appreciate that article 1275 of the Civil Code does not apply in all situations of successive transfers relating to movable tangible property granted by the same legal subject. Corroborating this text with the norms in article 937 paragraph (1 of the Civil Code and article1273 paragraph (1 of the Civil Code it leads to the solution according to which article 1275 of the Civil Code regards only the cases where the transfer of successive property are of the same nature, the onerous primary act has not resulted in immediate transmission of real previous right of the document with the free subsidiary title and when the primal act is free, and the alternative is onerous. It is excluded, thus from the application of the rule in question when the primary onerous act had as effect the immediate transmission of the real right and then, but without having occurred the delivery of the asset by the acquirer, it was concluded a document with a free title, subsidiary.

  8. Extending the magnetoelectric efficiency of an MFC/brass/NdFeB energy harvester by coupling a pair of movable magnets

    Science.gov (United States)

    Leung, Chung Ming; Wang, Ya

    2017-10-01

    In this letter, an MFC/brass/NdFeB tip magnet three-phase cantilever beam was coupled with a pair of movable magnets to harness energy from alternating magnetic fields. By coupling with a pair of moveable magnets, both bandwidth and magnetoelectric (ME) voltage coefficient (α\\text{V}) were largely increased by 25% and 87.5%, respectively, in comparison with the same harvester coupled with stationary magnets. Such improvements were attributed to magnetic energy introduced by the moving magnets. Experiments also revealed the boundary positions of external magnets (movable and stationary) where the repulsive magnetic forces jumped to the attractive ones, and the stiffness hardening switched to the softening process. These results provided a wide-band nonlinear approach to efficiently harvest/detect the low-frequency alternating magnetic field energies.

  9. PowerShades II. Optimisation and validation of highly transparent photovoltaic. Final report

    Energy Technology Data Exchange (ETDEWEB)

    2010-07-15

    The objective of the project is continued development and validation of a novel Danish photovoltaic product with the work title ''PowerShade''. The PowerShade insulating glazing unit (IGU) is a combination of a strong solar shading device and a power producing photovoltaic coating. The core technology in the PowerShade IGU is a thin film silicon photovoltaic generator applied to a micro structured substrate. The geometry of the substrate provides the unique combination of properties that characterizes the PowerShade module - strong progressive shading, high transparency, and higher electrical output than other semitransparent photovoltaic products with similar transparencies. The project activities fall in two categories, namely development of the processing/product and validation of the product properties. The development part of the project is focussed on increasing the efficiency of the photovoltaic generator by changing from a single-stack type cell to a tandem-stack type cell. The inclusion of PowerShade cells in insulating glazing (IG) units is also addressed in this project. The validation part of the project aims at validation of stability, thermal and optical properties as well as validation of the electrical yield of the product. The validation of thermal and optical properties has been done using full size modules installed in a test facility built during the 2006-08 ''PowerShades'' project. The achieved results will be vital in the coming realisation of a commercial product. Initial processing steps have been automated, and more efficient tandem-type solar cells have been developed. A damp heat test of an IGU has been carried out without any degradation of the solar cell. The PowerShade module assembly concept has been further developed and discussed with different automation equipment vendors and a pick-and-place tool developed. PowerShade's influence on the indoor climate has been modelled and verified by

  10. Climate-change refugia: shading reef corals by turbidity.

    Science.gov (United States)

    Cacciapaglia, Chris; van Woesik, Robert

    2016-03-01

    Coral reefs have recently experienced an unprecedented decline as the world's oceans continue to warm. Yet global climate models reveal a heterogeneously warming ocean, which has initiated a search for refuges, where corals may survive in the near future. We hypothesized that some turbid nearshore environments may act as climate-change refuges, shading corals from the harmful interaction between high sea-surface temperatures and high irradiance. We took a hierarchical Bayesian approach to determine the expected distribution of 12 coral species in the Indian and Pacific Oceans, between the latitudes 37°N and 37°S, under representative concentration pathway 8.5 (W m(-2) ) by 2100. The turbid nearshore refuges identified in this study were located between latitudes 20-30°N and 15-25°S, where there was a strong coupling between turbidity and tidal fluctuations. Our model predicts that turbidity will mitigate high temperature bleaching for 9% of shallow reef habitat (to 30 m depth) - habitat that was previously considered inhospitable under ocean warming. Our model also predicted that turbidity will protect some coral species more than others from climate-change-associated thermal stress. We also identified locations where consistently high turbidity will likely reduce irradiance to turbid nearshore refuges identified in this study, particularly in the northwestern Hawaiian Islands, the northern Philippines, the Ryukyu Islands (Japan), eastern Vietnam, western and eastern Australia, New Caledonia, the northern Red Sea, and the Arabian Gulf, should become part of a judicious global strategy for reef-coral persistence under climate change. © 2015 John Wiley & Sons Ltd.

  11. Shades of irony in the anti-language of Amos

    Directory of Open Access Journals (Sweden)

    William Domeris

    2016-08-01

    Full Text Available The rhetoric of Amos includes a wonderful mixture of humour and threat, sarcasm and irony, hyperbole and prediction. Holding the fabric of this conversation together is Amos’s place within the prophetic minority – the Yahweh-only party (his anti-society. Making use of sociolinguistics, and particularly the idea of anti-language, I take a closer look at Amos, including his use of overlexicalisation, insider-humour and all the shades of irony one might expect. Typically of a member of an anti-society, Amos exaggerates the differences between insider and outsider, in this case, speaking of ‘ivory houses’, ‘the cattle of Bashan’ while appealing to his successful attempts to save the rich from the wrath of God. The offenses of the outsiders are sometimes crystal clear and at other times shrouded in metaphor, and so too is the fate of these people. In reading Amos, we are constantly in danger of falling victim to the persuasive power of his rhetoric. We are drawn into the world of Amos, quickly accepting his boundaries and the ideology of his anti-society, his depiction of reality and his stark caricature of the rich. The rhetoric is persuasive and the irony is divisive forcing a choice of black and white, believer and unbeliever, rich and poor, oppressors and oppressed. We struggle to swim against the current and instead long to respond to Amos’s invitation to live (Am 5:5 – perhaps even to discover that elusive hope at which the book hints: Most of history has been the forging of structures of security and appropriate loyalty symbols, to announce and defend one’s personal identity, one’s group, and one’s gender issues and identity. (Rohr 2011:4

  12. Correlation between grain orientation and the shade of color etching

    International Nuclear Information System (INIS)

    Szabo, Peter J.; Kardos, I.

    2010-01-01

    Color etching is an extremely effective metallographic technique not only for making grains well visible, but also for making them distinguishable for automated image analyzers. During color etching, a thin film is formed on the surface of the specimen. The thickness of this layer is in the order of magnitude of the visible light and since both the metal-film boundary and the film surface reflect light, an interference occurs. A wavelength-component of the white line is eliminated and its complementary color will be seen on the surface. As the thickness changes, the colors also change grain by grain. The thickness of the film is dependent on several factors, mostly on the type of the phase. However, different color shades can be observed on the surfaces of single phase materials, which phenomenon is caused by the different crystallographic orientations of the grains. This paper shows a combined color etching electron backscatter diffraction (EBSD) investigation of cast iron. An area of the surface of a gray cast iron specimen was etched. Colors were characterized by their luminescence and their red, green and blue intensity. An EBSD orientation map was taken from the same area and the orientations of the individual grains were determined. Results showed that a strong correlation was found between the luminescence and the R, G, B intensity of the color and the angle between the specimen normal and the direction, while such correlation was not observed between the color parameters and the and directions, respectively. This indicates that film thickness is sensitive to the direction of the crystal.

  13. Utilising shade to optimize UV exposure for vitamin D

    Science.gov (United States)

    Turnbull, D. J.; Parisi, A. V.

    2008-06-01

    Numerous studies have stated that humans need to utilise full sun radiation, at certain times of the day, to assist the body in synthesising the required levels of vitamin D3. The time needed to be spent in the full sun depends on a number of factors, for example, age, skin type, latitude, solar zenith angle. Current Australian guidelines suggest exposure to approximately 1/6 to 1/3 of a minimum erythemal dose (MED), depending on age, would be appropriate to provide adequate vitamin D3 levels. The aim of the study was to determine the exposure times to diffuse solar UV to receive exposures of 1/6 and 1/3 MED for a changing solar zenith angle in order to assess the possible role that diffuse UV (scattered radiation) may play in vitamin D3 effective UV exposures (UVD3). Diffuse and global erythemal UV measurements were conducted at five minute intervals over a twelve month period for a solar zenith angle range of 4° to 80° at a latitude of 27.6° S. For a diffuse UV exposure of 1/3 MED, solar zenith angles smaller than approximately 50° can be utilised for exposure times of less than 10 min. Spectral measurements showed that, for a solar zenith angle of 40°, the UVA (315-400 nm) in the diffuse component of the solar UV is reduced by approximately 62% compared to the UVA in the global UV, whereas UVD3 wavelengths are only reduced by approximately 43%. At certain latitudes, diffuse UV under shade may play an important role in providing the human body with adequate levels of UVD3 (290-315 nm) radiation without experiencing the high levels of UVA observed in full sun.

  14. Edge coating apparatus with movable roller applicator for solar cell substrates

    Science.gov (United States)

    Pavani, Luca; Abas, Emmanuel

    2012-12-04

    A non-contact edge coating apparatus includes an applicator for applying a coating material on an edge of a solar cell substrate and a control system configured to drive the applicator. The control system may drive the applicator along an axis to maintain a distance with an edge of the substrate as the substrate is rotated to have the edge coated with a coating material. The applicator may include a recessed portion into which the edge of the substrate is received for edge coating. For example, the applicator may be a roller with a groove. Coating material may be introduced into the groove for application onto the edge of the substrate. A variety of coating materials may be employed with the apparatus including hot melt ink and UV curable plating resist.

  15. Modeling and simulation of the shading effect on the performance of a photovoltaic module in the presence of the bypass diode.

    Directory of Open Access Journals (Sweden)

    Zebiri Mohamed

    2018-01-01

    Full Text Available In photovoltaic renewable energy production systems where production is dependent on weather conditions, maintaining production at a suitable level is more than essential. The shading effect in photovoltaic panels affects the production of electrical energy by reducing it or even causing the destruction of some or all of the panels. To circumvent this problem, among the solutions proposed in the literature we find the use of by-pass diode and anti-return diode to minimize these consequences.In this paper we present a simulation under Matlab-Simulink of the shading effect and we compare the current voltages characteristics (I-V and power voltage (P-V of a photovoltaic system for different irradiations in the presence and absence of diode by -pass. For modeling, we will use the diode model and the Lambert W-function to solve the implicit equation of the output current. This method allows you to analyze the performance of a panel at different shading levels.

  16. Modeling and simulation of the shading effect on the performance of a photovoltaic module in the presence of the bypass diode.

    Science.gov (United States)

    Zebiri, Mohamed; Mediouni, Mohamed; Idadoub, Hicham

    2018-05-01

    In photovoltaic renewable energy production systems where production is dependent on weather conditions, maintaining production at a suitable level is more than essential. The shading effect in photovoltaic panels affects the production of electrical energy by reducing it or even causing the destruction of some or all of the panels. To circumvent this problem, among the solutions proposed in the literature we find the use of by-pass diode and anti-return diode to minimize these consequences.In this paper we present a simulation under Matlab-Simulink of the shading effect and we compare the current voltages characteristics (I-V) and power voltage (P-V) of a photovoltaic system for different irradiations in the presence and absence of diode by -pass. For modeling, we will use the diode model and the Lambert W-function to solve the implicit equation of the output current. This method allows you to analyze the performance of a panel at different shading levels.

  17. Influence of shading on ornamental and physiological characteristics during flower development of groundcover rose (Rosa hybrida L.)

    Science.gov (United States)

    Hou, Wei; Luo, Ya; Wang, Xiaorong; Chen, Qing; Sun, Bo; Wang, Yan; Liu, Zejing; Tang, Haoru; Zhang, Yong

    2018-04-01

    The objective of the present investigation was to study the effect of shading on flower quality during flower development and photosynthetic capacity of groundcover rose (Rosa hybrida L.). The results showed that shade significantly increased flower diameter, levels of soluble protein and soluble sugar, total carotenoids content and superoxide dismutase (SOD) activity, while contents of malondialdehyde (MDA) and total anthocyanins in shaded flowers were significantly decreased as compared to sun-exposed flowers. However, no significant changes were observed in petal color parameters L*, a*, b* and C* between sun exposure and shade treatment plants at each flower developmental stage. Therefore, groundcover rose seemed to have the capacity to shade condition through auto-regulation. These results could provide us with a theoretical basis for further application of groundcover rose in the greening of urban spaces and an understanding of the mechanisms behind the changes induced by shade.

  18. Shade tree diversity, cocoa pest damage, yield compensating inputs and farmers' net returns in West Africa.

    Directory of Open Access Journals (Sweden)

    Hervé Bertin Bisseleua Daghela

    Full Text Available Cocoa agroforests can significantly support biodiversity, yet intensification of farming practices is degrading agroforestry habitats and compromising ecosystem services such as biological pest control. Effective conservation strategies depend on the type of relationship between agricultural matrix, biodiversity and ecosystem services, but to date the shape of this relationship is unknown. We linked shade index calculated from eight vegetation variables, with insect pests and beneficial insects (ants, wasps and spiders in 20 cocoa agroforests differing in woody and herbaceous vegetation diversity. We measured herbivory and predatory rates, and quantified resulting increases in cocoa yield and net returns. We found that number of spider webs and wasp nests significantly decreased with increasing density of exotic shade tree species. Greater species richness of native shade tree species was associated with a higher number of wasp nests and spider webs while species richness of understory plants did not have a strong impact on these beneficial species. Species richness of ants, wasp nests and spider webs peaked at higher levels of plant species richness. The number of herbivore species (mirid bugs and cocoa pod borers and the rate of herbivory on cocoa pods decreased with increasing shade index. Shade index was negatively related to yield, with yield significantly higher at shade and herb covers<50%. However, higher inputs in the cocoa farms do not necessarily result in a higher net return. In conclusion, our study shows the importance of a diverse shade canopy in reducing damage caused by cocoa pests. It also highlights the importance of conservation initiatives in tropical agroforestry landscapes.

  19. Effect Of Shade Organic Materials And Varieties On Growth And Production Of Upland Rice

    Directory of Open Access Journals (Sweden)

    Jonatan Ginting

    2015-01-01

    Full Text Available Abstract There is a shade factor and low organic matter content of the soil is a problem that needs to be addressed in the development of upland rice cultivation as intercrops in the plantation area. Based on these considerations then one study that needs to be done is to conduct experiments on the effect of shade factor combined with the the provision of the organic material to the some varieties of upland rice that has been recommended nationally. The objective of experiment is to study the influence of shade organic materials and varieties on the growth and production of upland rice. This research using experimental design of Split - Split Plot Design with 3 treatment factors and 3 replications or blocks. The first factor is the treatment of shade with 3 levels shade percentage 0 20 and 40. The second factor is the dosage of organic material consists of 3 levels 0 g polybag 25 g polybag 50 g polybag and 75 g polybag. The third factor is the treatment of varieties consists of 4 types of upland rice varieties Si Kembiri Situ Patengggang Situ Bagendit and Tuwoti. The research results showed that the effect of shade on upland rice varieties decrease number of tillers number of panicles number of productive grains grain production per hill of uplnd rice plants and total sugar content of upland rice plants. Effect of organic matter increases number of panicles number of productive grains grain production per hill of upland rice plants and total sugar content of upland rice plants. It is known that the the variety of Situ Patenggang provides better growth and production compared with three other varieties Si Kembiri Situ Bagendit and Tuwoti in shaded conditions.

  20. Do shade-grown coffee plantations pose a disease risk for wild birds?

    Science.gov (United States)

    Hernandez, Sonia M; Peters, Valerie E; Weygandt, P Logan; Jimenez, Carlos; Villegas, Pedro; O'Connor, Barry; Yabsley, Michael J; Garcia, Maricarmen; Riblet, Sylva M; Carroll, C Ron

    2013-06-01

    Shade-grown coffee plantations are often promoted as a conservation strategy for wild birds. However, these agro-ecosystems are actively managed for food production, which may alter bird behaviors or interactions that could change bird health, compared to natural forest. To examine whether there is a difference between the health parameters of wild birds inhabiting shade-grown coffee plantations and natural forest, we evaluated birds in Costa Rica for (1) their general body condition, (2) antibodies to pathogens, (paramyxovirus and Mycoplasma spp.), and (3) the prevalence and diversity of endo-, ecto-, and hemoparasites. We measured exposure to Mycoplasma spp. and paramyxovirus because these are pathogens that could have been introduced with domestic poultry, one mechanism by which these landscapes could be detrimental to wild birds. We captured 1,561 birds representing 75 species. Although seasonal factors influenced body condition, we did not find bird general body condition to be different. A total of 556 birds of 31 species were tested for antibodies against paramyxovirus-1. Of these, five birds tested positive, four of which were from shade coffee. Out of 461 other tests for pathogens (for antibodies and nucleotide detection), none were positive. Pterolichus obtusus, the feather mite of chickens, was found on 15 birds representing two species and all were from shade-coffee plantations. Larvated eggs of Syngamus trachea, a nematode typically associated with chickens, were found in four birds captured in shade coffee and one captured in forest. For hemoparasites, a total of 1,121 blood smears from 68 bird species were examined, and only one species showed a higher prevalence of infection in shade coffee. Our results indicate that shade-coffee plantations do not pose a significant health risk to forest birds, but at least two groups of pathogens may deserve further attention: Haemoproteus spp. and the diversity and identity of endoparasites.

  1. VIDEO ANIMASI 3D PENGENALAN RUMAH ADAT DAN ALAT MUSIK KEPRI DENGAN MENGUNAKAN TEKNIK RENDER CEL-SHADING

    OpenAIRE

    Jianfranco Irfian Asnawi; Afdhol Dzikri

    2016-01-01

    Animasi ini berjudul "video animasi 3D rumah adat dan alat musik Kepulauan Riau dengan menggunakan teknik render cel-shading" merupakan video yang bertujuan memperkenalkan alat-alat musik yang berasal dari kepulauan riau, Animasi ini akan diterapkan dengan menggunakan teknik render cel-shading. Cel-shading adalah teknik render yang menampilkan grafik 3D yang menyerupai gambar tangan, seperti gambar komik dan kartun. Teknik ini juga sudah di terapkan dalam game 3D yang ternyata menarik banyak ...

  2. Analysis of fourth-grade flat machines with movable close-cycle formed by the rods and two complex links

    Directory of Open Access Journals (Sweden)

    S.О. Koshel

    2016-09-01

    Full Text Available Complex multielement mechanisms are increasingly used in the technical equipment of consumer industry. The lack of a universal method of kinematic research of these mechanisms asserts the relevance of work on the kinematic analysis of multielement mechanisms. Aim: The aim of this research is to develop an algorithm kinetic research of velocities of the points that coincide with geometric centers kinematic pairs of structure group of the 4th class and 3rd order with movable close-cycle formed by connecting rod and two complex links. Materials and Methods: The graphic-analytical method of a kinematic research will be used to achieve the goals of research. Development of an algorithm is based on provisions of the theory of mechanisms and engines about property of high classes mechanisms to change its class depending on another possible initial mechanism chosen conditionally which comes to structure of the conducted structural groups of the mechanism links and provisions of theoretical mechanics relatively to instantaneous center of speeds. Results: Velocity vectors of points of Assur group links of the 4th class and 3rd order of the composite flat mechanism are determined by a graphic-analytical method, where the initial mechanism speeds that led to decrease of a class of the mechanism and allowed to investigate it. Unlike the known erroneous statements method which is applied to research the structural groups of the 3rd class, the offered algorithm of the kinematic analysis allows to investigate mechanisms of the 4th class without need to rebuild the plan which was constructed in a uncertain scale, with the subsequent calculation of the real scale parameter of provided plotting of a graph.

  3. Instantaneous axial force of a high-order Bessel vortex beam of acoustic waves incident upon a rigid movable sphere.

    Science.gov (United States)

    Mitri, F G; Fellah, Z E A

    2011-08-01

    The present investigation examines the instantaneous force resulting from the interaction of an acoustical high-order Bessel vortex beam (HOBVB) with a rigid sphere. The rigid sphere case is important in fluid dynamics applications because it perfectly simulates the interaction of instantaneous sound waves in a reduced gravity environment with a levitated spherical liquid soft drop in air. Here, a closed-form solution for the instantaneous force involving the total pressure field as well as the Bessel beam parameters is obtained for the case of progressive, stationary and quasi-stationary waves. Instantaneous force examples for progressive waves are computed for both a fixed and a movable rigid sphere. The results show how the instantaneous force per unit cross-sectional surface and unit pressure varies versus the dimensionless frequency ka (k is the wave number in the fluid medium and a is the sphere's radius), the half-cone angle β and the order m of the HOBVB. It is demonstrated here that the instantaneous force is determined only for (m,n) = (0,1) (where n is the partial-wave number), and vanishes for m>0 because of symmetry. In addition, the instantaneous force and normalized amplitude velocity results are computed and compared with those of a rigid immovable (fixed) sphere. It is shown that they differ significantly for ka values below 5. The proposed analysis may be of interest in the analysis of instantaneous forces on spherical particles for particle manipulation, filtering, trapping and drug delivery. The presented solutions may also serve as a method for comparison to other solutions obtained by strictly numerical or asymptotic approaches. Copyright © 2011 Elsevier B.V. All rights reserved.

  4. Color Shade Nets Improve Vegetables Quality at Harvest and Maintain Quality During Storage

    Directory of Open Access Journals (Sweden)

    Ilić Zoran S.

    2018-03-01

    Full Text Available The photoselective, light-dispersive shade nets can be used as an alternative to protect crops from adverse environmental conditions such as; excessive solar radiation, heat and drought stress, wind and hail, birds, flying pests, thus improving crop’s production, yield and quality. The physiological parameters discussed in the review include: vegetable growth parameters (leaf area, leaf chlorophyll, tissue structure, fruit ripening, physiological disorders, pest and disease incidence, fruit quality parameters (soluble solids content and titratable acidity, bioactive compounds (antioxidant activity, ascorbic acid, carotenoid and flavonoid contents and aroma volatile compounds at harvest. Also, it is evident in the reviewed literature that light quality influences the biosynthesis, accumulation and retention of vegetable phytochemicals, as well as the decay development during storage. These new strategies to modulate light quality should be conveyed to vegetable producing farmers, thus allowing them to preserve the freshness and post-harvest quality of vegetables for an extended period of time, and to meet the consumers demand for vegetables with high nutritional value all year round. Research on light manipulation in horticultural systems is necessary for a sustainable and market-oriented open field and greenhouse vegetable production in the future.

  5. Photovoltaic greenhouses: evaluation of shading effect and its influence on agricultural performances

    Directory of Open Access Journals (Sweden)

    Sergio Castellano

    2014-12-01

    Full Text Available During the last years, European government remuneration polices promoted the realisation of photovoltaic systems integrated with the structures instead of on ground photovoltaic (PV plants. In this context, in rural areas, greenhouses covered with PV modules have been developed. In order to interdict the building of greenhouses with an amount of opaque panels on covering not coherent with the plant production, local laws assigned a threshold value, usually between 25% and 50%, of the projection on the soil of the roof. These ranges seem not to be based on scientific evaluation about the agricultural performances required to the building but only on empirical assessments. Purpose of this paper is to contribute to better understand the effect of different configurations of PV panels on the covering of a monospan duo-pitched roof greenhouse in terms of shading effect and energy efficiency during different periods of the year. At this aim, daylighting and insolation analysis were performed by means of the software Autodesk® Ecotect® Analysis (Autodesk, Inc., San Rafael, CA, USA on greenhouse model with different covering ratio of polycrystalline photovoltaic panels on the roof.

  6. Shaded Relief and Radar Image with Color as Height, Bosporus Strait and Istanbul, Turkey

    Science.gov (United States)

    2002-01-01

    The Bosporus (also spelled Bosphorus) is a strait that connects the Black Sea with the Sea of Marmara in the center of this view of northwest Turkey, taken during the Shuttle Radar Topography Mission. The water of the Black Sea at the top of the image and Sea of Marmara below the center are colored blue in this image, along with several large lakes. The largest lake, to the lower right of the Sea of Marmara, is Iznik Lake. The Bosporus (Turkish Bogazici) Strait is considered to be the boundary between Europe and Asia, and the large city of Istanbul, Turkey is located on both sides of the southern end of the strait, visible as a brighter (light green to white) area on the image due to its stronger reflection of radar. Istanbul is the modern name for a city with along history, previously called Constantinople and Byzantium. It was rebuilt as the capital of the Roman Empire in 330 A.D. by Constantine on the site of an earlier Greek city, and it was later the capital of the Byzantine and Ottoman empires until 1922.The Gulf of Izmit is the narrow gulf extending to the east (right) from the Sea of Marmara. The city of Izmit at the end of the gulf was heavily damaged by a large magnitude 7.4 earthquake on August 17,1999, often called the Izmit earthquake (also known as the Kocaeli, Turkey, earthquake), that killed at least 17,000 people. A previous earthquake under the Gulf of Izmit in 1754 killed at least 2,000people. The Izmit earthquake ruptured a long section of the North Anatolian Fault system from off the right side of this image continuing under the Gulf of Izmit. Another strand of the North Anatolian Fault system is visible as a sharp linear feature in the topography south of Iznik Lake. Bathymetric surveys show that the north Anatolian Fault system extends beneath and has formed the Sea of Marmara, in addition to the Gulf of Izmit and Iznik Lake. Scientists are studying the North Anatolian Fault system to determine the risk of a large earthquake on the faults

  7. A surface-micromachining-based inertial micro-switch with compliant cantilever beam as movable electrode for enduring high shock and prolonging contact time

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Qiu [National Key Laboratory of Science and Technology on Micro/Nano Fabrication, School of Electronics Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai, 200240 (China); Yang, Zhuoqing, E-mail: yzhuoqing@sjtu.edu.cn [National Key Laboratory of Science and Technology on Micro/Nano Fabrication, School of Electronics Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai, 200240 (China); Fu, Bo; Li, Jianhua; Wu, Hao [Huaihai Industrial Group Co., Ltd., Changzhi, Shanxi Province, 046012 (China); Zhang, Qihuan; Sun, Yunna; Ding, Guifu; Zhao, Xiaolin [National Key Laboratory of Science and Technology on Micro/Nano Fabrication, School of Electronics Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai, 200240 (China)

    2016-11-30

    Highlights: • The designed cantilever beam attached to the proof mass can endure a larger shock acceleration (∼1000 g order of magnitude) compared to those traditional designs (∼100 g order of magnitude). • Effect of the pulse width on the threshold acceleration, the response time and the contact time is investigated. • A constraint sleeve structure is introduced to lower the off-axis sensitivity. - Abstract: A novel laterally-driven inertial micro-switch with two L-shaped elastic cantilever beams as the movable electrode, which is attached to the proof mass, is proposed in this paper. The advantage of this design is that the contact time of the inertial micro-switch can be prolonged. Meanwhile, the micro-switch can withstand a higher shock than the traditional designs whose cantilever beams are attached to the fixed electrode. The designed inertial micro-switch was simulated and optimized with ANSYS software and fabricated on a quartz substrate by surface micromachining technology. The simulated result demonstrates that the threshold acceleration (a{sub ths}) under stable switch-on state is about 288 g and the contact time is about 198 μs when the pulse width of acceleration loads is 1 ms. At the same time, it indicates that the threshold acceleration, the response time and the contact time of designed micro-switch all increase with the pulse width of acceleration loads. The simulation of impact process in non-sensitive direction shows that the introduced constraint sleeve structure in the novel inertial micro-switch can lower the off-axis sensitivity. The fabricated micro-switch prototype has been tested by a standard dropping hammer system under shock accelerations with various amplitudes and pulse widths. The experimental measurements show that the contact time is about 150 μs when the threshold acceleration is about 288 g. It also indicates that the response time and the contact time both increase with the pulse width, which is consistent with the

  8. Different levels of shade on population of grasshoppers and its oviposition preference on heliconias

    Directory of Open Access Journals (Sweden)

    Ana Cristina Bittar

    2018-02-01

    Full Text Available ABSTRACT: Grasshoppers of the families Acrididae and Romaleidae (Orthoptera are among the insects that defoliate heliconias and have been gaining status as pests of commercial crops of these plants in Brazil. The objectives of the present study were to identify the grasshopper defoliating heliconias in the municipality of Santo Antônio de Pádua, RJ (Brazil, to evaluate the effect of different levels of shade on the population of this grasshopper and the production parameters of heliconias, and to determine if this grasshopper has an oviposition preference among the heliconias evaluated. The experiment was in a completely randomized block design, in subdivided plots (four levels of shade in the plot, 0%, 30%, 50% and 80%, and four species of Heliconia: H. psittacorum, H. stricta, H. wagneriana and H. psittacorum x H. spathocircinata ‘Golden Torch’ in the subplot, with four replications. The grasshopper was identified as Cornops frenatum frenatum (Acrididae. An increase in shade resulted in a decrease in the number of oviposition holes from the grasshopper and the number of lateral buds. Shade did not influence the number of C. f. frenatum nymphs and adults and the number of flower stems. H. wagneriana was the most preferred species for oviposition by C. f. frenatum. Results suggested using screens to shade heliconia plants can help control C. f. frenatum populations, however, the light requirements of the heliconias should be considered to guarantee productivity.

  9. Estimation of Areal Mean Rainfall in Remote Areas Using B-SHADE Model

    Directory of Open Access Journals (Sweden)

    Tao Zhang

    2016-01-01

    Full Text Available This study presented a method to estimate areal mean rainfall (AMR using a Biased Sentinel Hospital Based Area Disease Estimation (B-SHADE model, together with biased rain gauge observations and Tropical Rainfall Measuring Mission (TRMM data, for remote areas with a sparse and uneven distribution of rain gauges. Based on the B-SHADE model, the best linear unbiased estimation of AMR could be obtained. A case study was conducted for the Three-River Headwaters region in the Tibetan Plateau of China, and its performance was compared with traditional methods. The results indicated that B-SHADE obtained the least estimation biases, with a mean error and root mean square error of −0.63 and 3.48 mm, respectively. For the traditional methods including arithmetic average, Thiessen polygon, and ordinary kriging, the mean errors were 7.11, −1.43, and 2.89 mm, which were up to 1027.1%, 127.0%, and 358.3%, respectively, greater than for the B-SHADE model. The root mean square errors were 10.31, 4.02, and 6.27 mm, which were up to 196.1%, 15.5%, and 80.0%, respectively, higher than for the B-SHADE model. The proposed technique can be used to extend the AMR record to the presatellite observation period, when only the gauge data are available.

  10. Cooling and energy saving potentials of shade trees and urban lawns in a desert city

    International Nuclear Information System (INIS)

    Wang, Zhi-Hua; Zhao, Xiaoxi; Yang, Jiachuan; Song, Jiyun

    2016-01-01

    Highlights: • We developed a numerical framework incorporating trees in an urban canopy model. • Shade trees have more prominent energy saving potential than urban lawns. • The trade-off between water-energy is a key for urban landscape management. • Urban vegetation can significantly alleviate outdoor thermal stress. - Abstract: The use of urban vegetation in cities is a common landscape planning strategy to alleviate the heat island effect as well as to enhance building energy efficiency. The presence of trees in street canyons can effectively reduce environmental temperature via radiative shading. However, resolving shade trees in urban land surface models presents a major challenge in numerical models, especially in predicting the radiative heat exchange in canyons. In this paper, we develop a new numerical framework by incorporating shade trees into an advanced single-layer urban canopy model. This novel numerical framework is applied to Phoenix metropolitan area to investigate the cooling effect of different urban vegetation types and their potentials in saving building energy. It is found that the cooling effect by shading from trees is more significant than that by evapotranspiration from lawns, leading to a considerable saving of cooling load. In addition, analysis of human thermal comfort shows that urban vegetation plays a crucial role in creating a comfortable living environment, especially for cities located in arid or semi-arid region.

  11. Personal exposure distribution of solar erythemal ultraviolet radiation in tree shade over summer

    International Nuclear Information System (INIS)

    Parisi, A.V.; Wong, J.C.F.

    2000-01-01

    The personal radiant exposure distribution of solar erythemal UV in tree shade for an upright posture was measured, with measurements over the whole summer for a total of 17 trees. For each tree, the personal radiant exposure distribution was measured for both the morning and afternoon periods. The exposure ratios averaged over all the trees and over the morning and afternoon periods ranged from 0.16 to 0.49 for the different anatomical sites. A numerical model was employed to estimate the UV radiant exposure to humans in tree shade over the entire summer. The body sites with the higher exposure ratios in the tree shade were the vertex of the head, shoulders and forearms with radiant exposures over the summer of 1300 MED to the vertex of the head and 1100 MED to the shoulders and forearms. These radiant exposures in the shade are substantially higher than the ambient erythemal UV measured in full sun on a horizontal plane over a full summer at a more temperate northern hemisphere latitude. The average radiant exposures per day to each anatomical site for a complete day in the tree shade ranged from 4.6 to 14.6 MED. This research has provided new data that is essential to quantify human UV exposure during outdoor activities. (author)

  12. Analysis and Comparison of Shading Strategies to Increase Human Thermal Comfort in Urban Areas

    Directory of Open Access Journals (Sweden)

    Ivan Lee

    2018-03-01

    Full Text Available With the expected increase in warmer conditions caused by climate change, heat-related illnesses are becoming a more pressing issue. One way that humans can protect themselves from this is to seek shade. The design of urban spaces can provide individuals with a variety of ways to obtain this shade. The objective of this study was to perform a detailed evaluation and comparison of three shading strategies that could be used in an urban environment: shade from a building, from a tree, and from an umbrella. This was done through using field measurements to calculate the impact of each strategy on a thermal comfort index (Comfort Formula (COMFA in two urban settings during sunny days of the summer of 2013 and 2014 in London, Canada. Building shade was found to be the most effective cooling strategy, followed by the tree strategy and the umbrella strategy. As expected, the main determinant of this ranking was a strategy’s ability to block incoming shortwave radiation. Further analysis indicated that changes in the convective loss of energy and in longwave radiation absorption had a smaller impact that caused variations in the strategy effectiveness between settings. This suggests that under non-sunny days, these rankings could change.

  13. Development of digital shade guides for color assessment using a digital camera with ring flashes.

    Science.gov (United States)

    Tung, Oi-Hong; Lai, Yu-Lin; Ho, Yi-Ching; Chou, I-Chiang; Lee, Shyh-Yuan

    2011-02-01

    Digital photographs taken with cameras and ring flashes are commonly used for dental documentation. We hypothesized that different illuminants and camera's white balance setups shall influence color rendering of digital images and affect the effectiveness of color matching using digital images. Fifteen ceramic disks of different shades were fabricated and photographed with a digital camera in both automatic white balance (AWB) and custom white balance (CWB) under either light-emitting diode (LED) or electronic ring flash. The Commission Internationale d'Éclairage L*a*b* parameters of the captured images were derived from Photoshop software and served as digital shade guides. We found significantly high correlation coefficients (r² > 0.96) between the respective spectrophotometer standards and those shade guides generated in CWB setups. Moreover, the accuracy of color matching of another set of ceramic disks using digital shade guides, which was verified by ten operators, improved from 67% in AWB to 93% in CWB under LED illuminants. Probably, because of the inconsistent performance of the flashlight and specular reflection, the digital images captured under electronic ring flash in both white balance setups revealed less reliable and relative low-matching ability. In conclusion, the reliability of color matching with digital images is much influenced by the illuminants and camera's white balance setups, while digital shade guides derived under LED illuminants with CWB demonstrate applicable potential in the fields of color assessments.

  14. Retrofits for Energy Efficient Office Buildings: Integration of Optimized Photovoltaics in the Form of Responsive Shading Devices

    Directory of Open Access Journals (Sweden)

    Hardi K. Abdullah

    2017-11-01

    Full Text Available This study presents a retrofit strategy: integrating optimized photovoltaics (PV in the form of responsive shading devices using a dual-axis solar tracking system. A prototype-based model was fabricated to compare the efficiency of PV in this implementation with the conventional fixed installation. The office building, T1 Empire World in Erbil, was selected as a retrofit case study and for the application of the proposed integration system. In order to assess the effectiveness of the proposed retrofit method, the energy performance of the base case is simulated to be compared later with the energy performance simulations after the integration technique. The amount of generated electricity from the PV surfaces of the integrated shading elements is calculated. The energy simulations were performed using OpenStudio® (NREL, Washington, DC, USA, EnergyPlusTM (NREL, Washington, DC, USA, and Grasshopper/ Ladybug tools in which the essential results were recorded for the baseline reference, as well as the energy performance of the retrofitted building. The results emphasize that the PV-integrated responsive shading devices can maximize the efficiency of PV cells by 36.8% in comparison to the fixed installation. The integrated system can provide approximately 15.39% of the electr