WorldWideScience

Sample records for monomethoxy polyethylene glycol-block-polytrimethylene

  1. Thermo-sensitive transition of monomethoxy poly(ethylene glycol)-block-poly(trimethylene carbonate) films to micellar-like nanoparticles

    NARCIS (Netherlands)

    Zhang, Zheng; Grijpma, Dirk W.; Feijen, Jan

    2006-01-01

    Monomethoxy poly(ethylene glycol)-block-poly(trimethylene carbonate) (mPEG3–PTMC11, Mn of mPEG = 3.1 × 103 and Mn of PTMC = 10.8 × 103 g/mol) was synthesized by ring-opening polymerization of TMC using mPEG3 as an initiator and stannous octoate as a catalyst. The block copolymer has a broad melting

  2. Preparation and characterization of monomethoxy poly(ethylene glycol-poly(ε-caprolactone micelles for the solubilization and in vivo delivery of luteolin

    Directory of Open Access Journals (Sweden)

    Qiu JF

    2013-08-01

    Full Text Available Jin-Feng Qiu,1 Xiang Gao,1,2 Bi-Lan Wang,1 Xia-Wei Wei,1 Ma-Ling Gou,1 Ke Men,1 Xing-Yu Liu,1 Gang Guo,1 Zhi-Yong Qian,1 Mei-Juan Huang1 1Department of Thoracic Oncology, State Key Laboratory of Biotherapy and Cancer Center, West China Hospital and Medical School, Sichuan University, Chengdu, People’s Republic of China; 2Medical School and Department of Pathophysiology, College of Preclinical and Forensic Medical Sciences, Sichuan University, Chengdu, People’s Republic of China Abstract: Luteolin (Lu is one of the flavonoids with anticancer activity, but its poor water solubility limits its use clinically. In this work, we used monomethoxy poly(ethylene glycol-poly(ε-caprolactone (MPEG-PCL micelles to encapsulate Lu by a self-assembly method, creating a water-soluble Lu/MPEG-PCL micelle. These micelles had a mean particle size of 38.6 ± 0.6 nm (polydispersity index = 0.16 ± 0.02, encapsulation efficiency of 98.32% ± 1.12%, and drug loading of 3.93% ± 0.25%. Lu/MPEG-PCL micelles could slowly release Lu in vitro. Encapsulation of Lu in MPEG-PCL micelles improved the half-life (t½; 152.25 ± 49.92 versus [vs] 7.16 ± 1.23 minutes, P = 0.007, area under the curve (0–t (2914.05 ± 445.17 vs 502.65 ± 140.12 mg/L/minute, P = 0.001, area under the curve (0–∞ (2989.03 ± 433.22 vs 503.81 ± 141.41 mg/L/minute, P = 0.001, and peak concentration (92.70 ± 11.61 vs 38.98 ± 7.73 mg/L, P = 0.003 of Lu when the drug was intravenously administered at a dose of 30 mg/kg in rats. Also, Lu/MPEG-PCL micelles maintained the cytotoxicity of Lu on 4T1 breast cancer cells (IC50 = 6.4 ± 2.30 µg/mL and C-26 colon carcinoma cells (IC50 = 12.62 ± 2.17 µg/mL in vitro. These data suggested that encapsulation of Lu into MPEG-PCL micelles created an aqueous formulation of Lu with potential anticancer effect. Keywords: luteolin, micelle, MPEG-PCL, cancer therapy

  3. Synthesis, structural and in vitro studies of well-dispersed monomethoxy-poly(ethylene glycol)-honokiol conjugate micelles

    Energy Technology Data Exchange (ETDEWEB)

    Qiu Neng; Cai Lulu; Xie Dachun; Wang Guangcheng; Wu Wenshuang; Chen Lijuan [State Key Laboratory of Biotherapy and Cancer Center, West China Hospital, West China Medical School, Sichuan University, Chengdu 610041 (China); Zhang Yongkui; Song Hang [Department of Bio-pharmaceutical Engineering, School of Chemical Engineering, Sichuan University, Chengdu 610065 (China); Yin Huabin, E-mail: lijuan17@hotmail.co [Department of Electronics and Electrical Engineering, University of Glasgow, Glasgow G12 8QQ (United Kingdom)

    2010-12-15

    Honokiol, an active principle extracted from Magnolia officinalis, has great potential as a cancer treatment. However, its poor water solubility greatly hampers its delivery to the tumor sites at an effective concentration. In this study, an amphiphilic polymer-drug conjugate was successfully prepared by condensation of low molecular weight monomethoxy-poly(ethylene glycol) (MPEG)-2000 with honokiol (HK) through an ester linkage to increase the hydrophilicity of honokiol. The MPEG-honokiol (MPEG-HK) conjugate prepared formed nano-sized micelles, with a mean particle size of less than 20 nm (MPEG-HK, 360 {mu}g ml{sup -1}) in water, which could be well dispersed in water. The nanoparticles obtained were characterized by particle size distribution, morphology and zeta potential. The stability and hydrolysis profile of the polymeric pro-drug in phosphate-buffered saline (PBS) and plasma were also studied and the results showed that only 20% of the conjugated honokiol was released in 2.0 h in beagle dog plasma, while in PBS the time required to reach 20% of honokiol release was >200 h. Meanwhile, the inhibitory activity of the honokiol conjugate was found to be retained in vitro against LL/2 cell lines with an IC50 value of 10.7 {mu}g ml{sup -1}. These results suggest that the polymer-drug conjugate provides a potential new approach to hydrophobic drugs, such as honokiol, in formulation design.

  4. Plasma proteins adsorption mechanism on polyethylene-grafted poly(ethylene glycol) surface by quartz crystal microbalance with dissipation.

    Science.gov (United States)

    Jin, Jing; Jiang, Wei; Yin, Jinghua; Ji, Xiangling; Stagnaro, Paola

    2013-06-04

    Protein adsorption has a vital role in biomaterial surface science because it is directly related to the hemocompatibility of blood-contacting materials. In this study, monomethoxy poly(ethylene glycol) (mPEG) with two different molecular weights was grafted on polyethylene as a model to elucidate the adsorption mechanisms of plasma protein through quartz crystal microbalance with dissipation (QCM-D). Combined with data from platelet adhesion, whole blood clotting time, and hemolysis rate, the blood compatibility of PE-g-mPEG film was found to have significantly improved. Two adsorption schemes were developed for real-time monitoring of protein adsorption. Results showed that the preadsorbed bovine serum albumin (BSA) on the surfaces of PE-g-mPEG films could effectively inhibit subsequent adsorption of fibrinogen (Fib). Nonspecific protein adsorption of BSA was determined by surface coverage, not by the chain length of PEG. Dense PEG brush could release more trapped water molecules to resist BSA adsorption. Moreover, the preadsorbed Fib could be gradually displaced by high-concentration BSA. However, the adsorption and displacement of Fib was determined by surface hydrophilicity.

  5. Synthesis, characterization and drug loading property of Monomethoxy-Poly(ethylene glycol)-Poly(ε-caprolactone)-Poly(D,L-lactide) (MPEG-PCLA) copolymers

    Science.gov (United States)

    Chu, BingYang; Zhang, Lan; Qu, Ying; Chen, XiaoXin; Peng, JinRong; Huang, YiXing; Qian, ZhiYong

    2016-01-01

    Amphiphilic block copolymers have attracted a great deal of attention in drug delivery systems. In this work, a series of monomethoxy-poly (ethylene glycol)-poly (ε-caprolactone-co-D,L-lactide) (MPEG-PCLA) copolymers with variable composition of poly (ε-caprolactone) (PCL) and poly (D,L-lactide) (PDLLA) were prepared via ring-opening copolymerization of ε-CL and D,L-LA in the presence of MPEG and stannous octoate. The structure and molecular weight were characterized by nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The crystallinity, hydrophilicity, thermal stability and hydrolytic degradation behavior were investigated in detail, respectively. The results showed that the prepared amphiphilic MPEG-PCLA copolymers have adjustable properties by altering the composition of PCLA, which make it convenient for clinical applications. Besides, the drug loading properties were also studied. Docetaxel (DTX) could be entrapped in MPEG-PCLA micelles with high loading capacity and encapsulation efficiency. And all lyophilized DTX-loaded MPEG-PCLA micelles except MPEG-PCL micelles were readily re-dissolved in normal saline at 25 °C. In addition, DTX-loaded MPEG-PCLA micelles showed a slightly enhanced antitumor activity compared with free DTX. Furthermore, DTX micelles exhibited a slower and sustained release behavior in vitro, and higher DTX concentration and longer retention time in vivo. The results suggested that the MPEG-PCLA copolymer with the adjustable ratio of PCL to PDLLA may be a promising drug delivery carrier for DTX. PMID:27677842

  6. Polyethylene Glycol 3350

    Science.gov (United States)

    Polyethylene glycol 3350 is used to treat occasional constipation. Polyethylene glycol 3350 is in a class of medications called ... Polyethylene glycol 3350 comes as a powder to be mixed with a liquid and taken by mouth. It ...

  7. Preparation of amino-terminated poly(ethylene glycol)by periodate oxidation%高碘酸氧化法制备端氨基聚乙二醇的研究

    Institute of Scientific and Technical Information of China (English)

    陈阳建; 许丽丽; 张新波; 彭富君; 宋潇达

    2015-01-01

    Monomethoxy poly( ethylene glycol)tosylate( mPEG5000-OTs)was synthesized by sulfonic esterification from monomethoxy poly(ethylene glycol)5000(mPEG5000)and p-toluenesulfonyl chloride (p-TsCl),and then reacted with ethanolamine as nucleophile to produce a new poly(ethylene glycol)in-termediate with the β-amino alcohol structure at the end. Amino-terminated poly( ethylene glycol ) (mPEG5000-NH2 )with the relative molecular mass of 5 000 was 75. 1% . The structures of products were characterized and identified by IR and 1 H NMR.%单甲氧基聚乙二醇5000(mPEG5000)和对甲苯磺酰氯(p-TsCl)磺酸酯化,得到单甲氧基聚乙二醇对甲苯磺酸酯(mPEG5000-OTs),与乙醇胺亲核取代反应,获得末端具有β-氨基醇结构的聚乙二醇中间体,用高碘酸盐氧化,得相对分子质量5000的端氨基聚乙二醇(mPEG5000-NH2),总收率75.1%,产物结构通过 IR 和1 H NMR 进行表征。

  8. [Biodegradation of polyethylene].

    Science.gov (United States)

    Yang, Jun; Song, Yi-ling; Qin, Xiao-yan

    2007-05-01

    Plastic material is one of the most serious solid wastes pollution. More than 40 million tons of plastics produced each year are discarded into environment. Plastics accumulated in the environment is highly resistant to biodegradation and not be able to take part in substance recycle. To increase the biodegradation efficiency of plastics by different means is the main research direction. This article reviewed the recent research works of polyethylene biodegradation that included the modification and pretreatment of polyethylene, biodegradation pathway, the relevant microbes and enzymes and the changes of physical, chemical and biological properties after biodegradation. The study directions of exploiting the kinds of life-forms of biodegradation polyethylene except the microorganisms, isolating and cloning the key enzymes and gene that could produce active groups, and enhancing the study on polyethylene biodegradation without additive were proposed.

  9. Steric Stabilization of “Charge-Free” Cellulose Nanowhiskers by Grafting of Poly(ethylene glycol

    Directory of Open Access Journals (Sweden)

    Jun Araki

    2014-12-01

    Full Text Available A sterically stabilized aqueous suspension of “charge-free” cellulose nanowhiskers was prepared by hydrochloric acid hydrolysis of cotton powders and subsequent surface grafting of monomethoxy poly(ethylene glycol (mPEG. The preparation scheme included carboxylation of the terminal hydroxyl groups in mPEG via oxidation with silica gel particles carrying 2,2,6,6-tetramethyl-1-pyperidinyloxyl (TEMPO moieties and subsequent esterification between terminal carboxyls in mPEG and surface hydroxyl groups of cellulose nanowhiskers, mediated by 1,1'-carbonyldiimidazole (CDI in dimethyl sulfoxide or dimethylacetamide. Some of the prepared PEG-grafted samples showed remarkable flow birefringence and enhanced stability after 24 h, even in 0.1 M NaCl, suggesting successful steric stabilization by efficient mPEG grafting. Actual PEG grafting via ester linkages was confirmed by attenuated total reflectance-Fourier transform infrared spectrometry. In a typical example, the amount of grafted mPEG was estimated as ca. 0.3 g/g cellulose by two measurements, i.e., weight increase after grafting and weight loss after alkali cleavage of ester linkages. Transmission electron microscopy indicated unchanged nanowhisker morphology after mPEG grafting.

  10. Self-assembly of silanated poly(ethylene glycol) on silicon and glass surfaces for improved haemocompatibility

    Science.gov (United States)

    Guo, Zhang; Meng, Sheng; Zhong, Wei; Du, Qiangguo; Chou, Laisheng L.

    2009-05-01

    Surface immobilization of poly(ethylene glycol) (PEG) is an effective method to produce a material surface with protein repulsive property. This property could be made permanent by using covalent grafting of the PEG molecules onto material surfaces. In this study, self-assembled monolayers (SAMs) of PEG on silicon-containing materials (silicon chip and glassplate) were obtained through a one-step coating procedure of one kind of silanated PEG molecules made through the reaction between monomethoxy PEG and 3-isocyanatopropyltriethoxysilane. Atomic force microscopy (AFM) and water static contact angle measurement were employed to investigate the surface topography and wettability of the PEGylated material surfaces. The changes in the topography and the water contact angle of the surfaces with time of incubation in PBS solution were also measured. The results revealed that stable and uniform self-assembled monolayers of PEG could be formed on silicon or glass surfaces by simply soaking the substrates in the solution of silanated PEGs. The covalent coupling of PEGs to the substrates was also confirmed. In order to evaluate the stability of the SAMs, blood compatibility of the modified glassplate surface was evaluated by measuring full blood activated partial thromboplastin time (APTT), prothrombin time (PT), and thrombin time (TT), as well as by scanning electron microscopy (SEM) analysis of the appearance of adherence and denaturation of blood platelets onto the glassplate. The silanated PEGs were shown to have good effect on the protein-repulsion as well as haemocompatibility of the substrates.

  11. Polyethylene Glycol Propionaldehydes

    Science.gov (United States)

    Harris, Joe M.; Sedaghat-Herati, Mohammad R.; Karr, Laurel J.

    1992-01-01

    New class of compounds derived from polyethylene glycol (PEG's) namely, PEG-propionaldehydes, offers two important advantages over other classes of PEG aldehyde derivatives: compounds exhibit selective chemical reactivity toward amino groups and are stable in aqueous environment. PEG's and derivatives used to couple variety of other molecules, such as, to tether protein molecules to surfaces. Biotechnical and biomedical applications include partitioning of two phases in aqueous media; immobilization of such proteins as enzymes, antibodies, and antigens; modification of drugs; and preparation of protein-rejecting surfaces. In addition, surfaces coated with PEG's and derivatives used to control wetting and electroosmosis. Another potential application, coupling to aminated surfaces.

  12. Radiation processing of polyethylene

    Science.gov (United States)

    Barlow, A.; Biggs, J. W.; Meeks, L. A.

    This paper covers two areas (a) the use of high energy radiation for the synthesis and improvement of polymer properties and (b) the formulation of radiation curable compounds for automotive/appliance wire applications and high voltage insulation. The first part discusses the use of gamma radiation for the bulk polymerization of ethylene and the properties of the polymer produced. The use of low dose radiation to increase polymer molecular weight and modify polydispersity is also described together with its projected operational cost. An update is provided of the cost savings that can be realized when using radiation crosslinked heavy duty film, which expands its applications, compared with noncrosslinked materials. The second section of the paper considers the advantages and disadvantages of radiation vs. peroxide curing of wire and cable compounds. The formulation of a radiation curable, automotive/appliance wire compound is discussed together with the interactions between the various ingredients; i.e., base resin, antioxidants, flame retardant filler, coupling agents, processing aids and radiation to achieve the desired product. In addition, the general property requirements of a radiation curable polyethylene for high voltage insulation are discussed; these include crosslinking efficiency, thermal stability, wet tree resistance and satisfactory dielectric properties. Preliminary data generated in the development of a 230KV radiation crosslinked polyethylene insulation are included.

  13. Polyethylene-Based Tadpole Copolymers

    KAUST Repository

    Alkayal, Nazeeha

    2017-02-15

    Novel well-defined polyethylene-based tadpole copolymers ((c-PE)-b-PS, PE: polyethylene, PS: polystyrene) with ring PE head and linear PS tail are synthesized by combining polyhomologation, atom transfer radical polymerization (ATRP), and Glaser coupling reaction. The -OH groups of the 3-miktoarm star copolymers (PE-OH)-b-PS, synthesized by polyhomologation and ATRP, are transformed to alkyne groups by esterification with propiolic acid, followed by Glaser cyclization and removal of the unreacted linear with Merrifield\\'s resin-azide. The characterization results of intermediates and final products by high-temperature size exclusion chromatography, H NMR spectroscopy, and differential scanning calorimetry confirm the tadpole topology.

  14. Hexanoic acid and polyethylene glycol double grafted amphiphilic chitosan for enhanced gene delivery: influence of hydrophobic and hydrophilic substitution degree.

    Science.gov (United States)

    Layek, Buddhadev; Haldar, Manas K; Sharma, Gitanjali; Lipp, Lindsey; Mallik, Sanku; Singh, Jagdish

    2014-03-03

    Gene therapy holds immense potential as a future therapeutic strategy for the treatment of numerous genetic diseases which are incurable to date. Nevertheless, safe and efficient gene delivery remains the most challenging aspects of gene therapy. To overcome this difficulty a series of hexanoic acid (HA) and monomethoxy poly(ethylene glycol) (mPEG) double grafted chitosan-based (HPC) nanomicelles were developed as nonviral gene carrier. HPC polymers with various HA and mPEG substitution degrees were synthesized, and their chemical structures were confirmed by (1)H NMR spectroscopy. HPC nanomicelles exhibited excellent blood compatibility and cell viability, as demonstrated by in vitro hemolysis and MTT assay, respectively. The cationic HPC nanomicelles retained the plasmid DNA (pDNA) binding capacity of chitosan and formed stable HPC/pDNA polyplexes with diameters below 200 nm. Both hydrophobic and hydrophilic substitution resulted in suppressed nonspecific protein adsorption on HPC/pDNA polyplexes and increased pDNA dissociation. However, resistance against DNase I degradation was enhanced by HA conjugation while being inhibited by mPEG substitution. Amphiphilic modification resulted in 3-4.5-fold higher cellular uptake in human embryonic kidney 293 cells (HEK 293) mainly through clathrin-mediated pathway. The optimal HPC/pDNA polyplexes displayed 50-fold and 1.2-fold higher gene transfection compared to unmodified chitosan and Fugene, respectively, in HEK 293 cells. Moreover, both the cellular uptake and in vitro transfection study suggested a clear dependence of gene expression on the extent of HA and mPEG substitution. These findings demonstrate that amphiphilic HPC nanomicelles with the proper combination of HA and mPEG substitution could be used as a promising gene carrier for efficient gene therapy.

  15. AN APPROACH TO SYNTHESIZE POLY(ETHYLENE GLYCOL)-b-POLY(ε-CAPROLACTONE) WITH TERMINAL AMINO GROUP via SCHIFF'S BASE AS AN INITIATOR

    Institute of Scientific and Technical Information of China (English)

    Li Chen; Xiu-li Zhuang; Guo-en Sun; Xue-si Chen; Xia-bin Jing

    2008-01-01

    A new method to synthesize a degradable terminal amino group-containing copolymer, poly(ethylene glycol)-b-poly(ε-caprolactone) (MPEG-PCL-NH2), was developed in the following three steps: (1) the ring-opening polymerization (ROP) of ε-caprolactone from the Schiff base prepared from benzaldehyde and ethanolamine (Ph-CH=NCH2CH2OH) used as an initiator to obtain heterobifunctional poly(ε-caprolactone) with one terminal Schiff base group and one hydroxyl group (HO-PCL-CH2CH2N = CH-Ph); (2) the coupling reaction of two reactive precursors, a hydroxy-terminated HO-PCL-CH2CH2N=CH-Ph and α-monocarboxy-ωmonomethoxy poly(ethylene glycol) (CMPEG) to synthesize MPEG-PCL-CH2CH2N=CH-Ph; (3) the conversion of the -N=CH-Ph end-group into NH2 end-group by acidification of acetic acid to obtain MPEG-PCL-NH2. The structures from the precursors to the terminal amino group-containing copolymer were confirmed by 1H-NMR and their molecular weights were measured by gel permeation chromatography. The amphiphilic terminal amino group-containing copolymer could self-assemble into micelles in an aqueous system with PCL block as the core and PEG block as the shell. The micelle formation of the terminal amino group-containing block copolymer was studied by fluorescent probe technique and the existence of critical micellar concentration (cmc) confirmed the amphiphilic nature of the resulting copolymer. ESEM and DLS analysis of the micelles revealed a homogeneous spherical morphology and a unimodal size distribution.

  16. 76 FR 70896 - Polyethylene Glycol; Tolerance Exemption

    Science.gov (United States)

    2011-11-16

    ... AGENCY 40 CFR Part 180 Polyethylene Glycol; Tolerance Exemption AGENCY: Environmental Protection Agency... amu), 17,000; also known as polyethylene glycol, when used as an inert ingredient in a pesticide...(oxyethylene, minimum number average molecular weight (in amu), 17,000; also known as polyethylene...

  17. Mechanical properties of polyethylene foils

    Directory of Open Access Journals (Sweden)

    Ľubomír KUBÍK

    2014-03-01

    Full Text Available The paper deals with the evaluation of the mechanical properties of the polyethylene foils such as the stress, strain, modulus of elasticity and stress and strain in the moment of breaking. The thin foils (50 mm which contained 91 % of polyethylene Bralen RA 2–63 and 9 % colored concentrate Maxithen were studied. Four sorts of foils were examined: Maxithen HP 1510 – white, Maxithen HP 231111 – yellow, Maxithen HP 533031 – blue and Maxithen HP 533 041 – violet. Longitudinal and transversal tensile properties were studied. The tensile behavior was monitored on the motorized test stand ANDILOG STENTOR 1000. The moduli of elasticity of longitudinal samples of polyethylene Bralen RA 2—63 foils achieved the values in the range from 222.73 MPa to 298.24 MPa and the transversal samples in the range 179.61 MPa to 270.41 MPa. The stress of longitudinal samples of polyethylene Bralen RA 2–63 foils in the moment of the rupture achieved the values in the range from 9.46 MPa to 13.33 MPa at the strain from 1.51 mm*mm–1 to 1.54 mm*mm–1 and the transversal samples in the range from 12.38 MPa to 15.54 MPa at the strain from 1.48 mm*mm–1 to 1.58 mm*mm–1.

  18. Drying poly(ethylene glycol)

    OpenAIRE

    sprotocols

    2015-01-01

    Authors: Lucas Kinard, Kurtis Kasper & Antonios Mikos ### Abstract This protocol describes the drying of poly(ethylene glycol) (PEG) by a simple 6 step procedure. One can implement this protocol using common lab glass and lab equipment. Water is removed from PEG by azeotropic distillation in toluene. The two components are mixed and toluene and water are distilled off by heating the solution to 170°C. This procedure can be implemented in ~2 h. ### Introduction In many ...

  19. Positronium diffusion in crystalline polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Serna, J. (Dept. de Fisica de Materiales, Univ. Complutense, Madrid (Spain))

    1990-12-16

    The analysis in four components of the positron lifetime spectra of nine different and structurally well characterised lamellar polyethylene samples has allowed to associate the two longest-lived components to positronium annihilation in the crystalline and amorphous phases. Further assumption on positronium tunneling through the interface between both phases, and a simple geometrical model, led to a value for the positronium diffusion coefficient in the crystalline phase of the order of 10{sup -4} cm{sup 2}/s. Interfaces have thicknesses around 1.5 nm and are shallow traps for positronium. (orig.).

  20. Poly(ethylene oxide) functionalization

    Energy Technology Data Exchange (ETDEWEB)

    Pratt, Russell Clayton

    2014-04-08

    A simple procedure is provided by which the hydroxyl termini of poly(ethylene oxide) can be appended with functional groups to a useful extent by reaction and precipitation. The polymer is dissolved in warmed toluene, treated with an excess of organic base and somewhat less of an excess of a reactive acylating reagent, reacted for several hours, then precipitated in isopropanol so that the product can be isolated as a solid, and salt byproducts are washed away. This procedure enables functionalization of the polymer while not requiring laborious purification steps such as solvent-solvent extraction or dialysis to remove undesirable side products.

  1. Diffusion of limonene in polyethylene.

    Science.gov (United States)

    Limm, W; Begley, T H; Lickly, T; Hentges, S G

    2006-07-01

    Diffusion coefficients of limonene in various linear low-density polyethylene (LLDPE) and low-density polyethylene (LDPE) resins have been determined from sorption data using a thermogravimetric methodology. From these data, one can determine whether polymer synthesis parameters such as the choice of catalytic process or co-monomer result in substantial differences in how much food packaging additives might migrate to food. For example, LLDPE is currently manufactured using either one of two distinct catalytic processes: Ziegler-Natta (ZN) and metallocene, a single-site catalyst. ZN catalysis is a heterogeneous process that has dominated polyolefin synthesis over the last half-century. It involves a transition metal compound containing a metal-carbon bond that can handle repeated insertion of olefin units. In contrast, metallocene catalysis has fewer than 20 years of history, but has generated much interest due to its ability to produce highly stereospecific polymers at a very high yield. In addition to high stereospecificity, metallocene-catalysed polymers are significantly lower in polydispersity than traditional ZN counterparts. Absorption and desorption testing of heat-pressed films made from LLDPE and LDPE resins of varying processing parameters indicates that diffusion coefficients of limonene in these resins do not change substantially.

  2. Polyethylene crystallization in compatibilized polyethylene/polyamide 6 blends

    Science.gov (United States)

    Ceccia, Simona; Hynstova, Katerina; Fabre, Alexandra; Trouillet-Fonti, Lise; Long, Didier; Sotta, Paul

    2011-03-01

    Blends of semicrystalline polymers can exhibit much better properties than each of the pure polymers regarding e.g. impact/modulus compromise. Controlling the crystallization mechanisms (nucleation, kinetics) is a key factor to obtain the desired morphologies which lead to these unique properties. We have studied the crystallization of polyethylene (PE) in blends of PE and polyamide 6 (PA) compatibilized by PE functionalized with maleic anhydride (PE-g-MA, 1 wt% MA) obtained by reactive blending. Samples with different amounts of PA6 (0-60 %vol) have been investigated by polarized optical microscopy and Differential Scanning Calorimetry. The samples were heated at a temperature above the melting temperature of PE and below the melting temperature of PA, and then cooled at the selected crystallization temperature. We describe how the crystallization kinetics is modified by the presence of PA and MA.

  3. Properties of Polyethylene Naphthalate Track Membranes

    CERN Document Server

    Akimenko, S N; Orelovich, O L; Maekawa, J; Ioshida, M; Apel, P Yu

    2002-01-01

    Basic characteristics of track membranes made of polyethylene naphthalate (which is a polyester synthesized from dimethyl naphthalate and ethylene glycol) are studied and presented. Polyethylene naphthalate possesses some properties (mechanical strength, thermal and chemical stability), which make this polymer a promising material for the production of track membranes. Water flow rate and air flow rate characteristics, burst strength, wettability, and amount of extractables are determined. Surface structure and pore structure are examined using scanning electron microscopy. It is found that the pores in the membranes are cylindrical in shape. The measured water and air flow rates follow known theoretical relations for the transport in narrow capillaries. The burst strength of polyethylene naphthalate membranes is found to be similar to that of polyethylene terephthalate track membranes. Polyethylene naphthalate track membranes can be categorized as moderately hydrophilic. Being treated with boiling water, pol...

  4. High performance polyethylene nanocomposite fibers

    Directory of Open Access Journals (Sweden)

    A. Dorigato

    2012-12-01

    Full Text Available A high density polyethylene (HDPE matrix was melt compounded with 2 vol% of dimethyldichlorosilane treated fumed silica nanoparticles. Nanocomposite fibers were prepared by melt spinning through a co-rotating twin screw extruder and drawing at 125°C in air. Thermo-mechanical and morphological properties of the resulting fibers were then investigated. The introduction of nanosilica improved the drawability of the fibers, allowing the achievement of higher draw ratios with respect to the neat matrix. The elastic modulus and creep stability of the fibers were remarkably improved upon nanofiller addition, with a retention of the pristine tensile properties at break. Transmission electronic microscope (TEM images evidenced that the original morphology of the silica aggregates was disrupted by the applied drawing.

  5. Molecular deformation mechanisms in polyethylene

    CERN Document Server

    Coutry, S

    2001-01-01

    adjacent labelled stems is significantly larger when the DPE guest is a copolymer molecule. Our comparative studies on various types of polyethylene lead to the conclusion that their deformation behaviour under drawing has the same basis, with additional effects imputed to the presence of tie-molecules and branches. Three major points were identified in this thesis. The changes produced by drawing imply (1) the crystallisation of some of the amorphous polymer and the subsequent orientation of the newly formed crystals, (2) the re-orientation of the crystalline ribbons and (3) the beginning of crystallite break-up. However, additional effects were observed for the high molecular weight linear sample and the copolymer sample and were attributed, respectively, to the presence of tie-molecules and of branches. It was concluded that both the tie-molecules and the branches are restricting the molecular movement during deformation, and that the branches may be acting as 'anchors'. This work is concerned with details...

  6. Crystallization studies of polyethylene -poly(ethylene glycol) graft copolymers

    Science.gov (United States)

    Mark, P. R.; Hovey, G. E.; Murthy, N. S.; Breitenkamp, K.; Kade, M.; Emerick, T.

    2006-03-01

    Structure and crystallization behavior of three copolymers obtained by grafting poly (ethylene glycol) (PEG) chains to polyethylene (PE) main chain was investigated by variable temperature x-ray diffraction and thermal analysis. The results show that PEG side chains and PE main chains crystallize into separate domains. This is especially true when grafted chains are long (50 and 100 repeat units), in which the PEG domains are same as in PEG homopolymer both in structure and in melting behavior. In the copolymer with shorter chains (25 repeat units), the PEG crystals are not distinct and melting is broad. The PEG domains can be dissolved in water or ethanol without altering the mechanical integrity of the film. PE crystallites in both samples are similar to that in PE homopolymer. For instance, the thermal expansion of the basal cell plane (a- and b-axes) of the PE domains agrees well with that of PE homopolymer over the entire temperature range from ambient to melt. However, the chain-axis dimension PE-lattice in the copolymer is shorter by ˜ 0.05 å and the basal dimensions are larger by ˜ 0.05 å. The changes in these dimensions due to the changes in the length of the grafted PEG chains were investigated.

  7. Reuse of polyethylene waste in road construction.

    Science.gov (United States)

    Raju, S S S V Gopala; Murali, M; Rengaraju, V R

    2007-01-01

    The cost of construction of flexible pavements depends on thickness of the pavement layers. The thickness of pavement mainly depends on the strength of the subgrade. By suitable improvement to the strength of the subgrade, considerable saving in the scarce resources and economy can be achieved. Because of their lightweight, easy handling, non-breakable and corrosion free nature, polyethylene have surpassed all other materials in utility. But polyethylene waste has been a matter of concern to environmentalists as it is non-biodegradable. In this investigation, an attempt has been made to study the improvement of California Bearing Ratio (CBR) value of soils stabilized with waste polyethylene bags. This alternative material is mixed in different proportions to the gravel and clay to determine the improvement ofCBR value. Use of the waste polyethylene bags observed to have a significant impact on the strength and economy in pavement construction, when these are available locally in large quantities.

  8. Radiation resistivity of polyacenaphthylene-grafted polyethylene

    Science.gov (United States)

    Hayakawa, Kiyoshi; Kawase, Kaoru; Yamakita, Hiromi

    Thin poly (ethylene-g-acenaphthylene) films prepared by the vapor-phase grafting method were subjected to the γ-irradiation in air, and various changes in tensile and structural properties of the film were investigated by comparing with those of the untreated or crosslinked polyethylene film. Polyethylene got to lose its inherent necking property by oxidative degradation and to be brittle-fractured by the irradiation dose less than 100 Mrad in air. The polyacenaphthylene-grafted polyethylenes (extent of grafting, ˜ 54 by {100( P-P°) }/{P°}), however, kept their ductility up to 200 Mrad or more, and the rate of increase in elastic modulus as well as yield strength with the increasing irradiation dose was considerably lower than that of untreated or crosslinked polyethylene. The effect of the grafting extent, and that of the irradiation dose-rate on the fracture energy were also examined. The weight increase of polyethylene due to the oxygen consumption and the resulting formation of carbonyl group which proceeded proportionally with the irradiation dose were remarkably suppressed by the grafting, whereas the double bond formation seemed to be unaffected by it. The grafted film held the original content of gel fraction unchanged during the irradiation in air, but the average molecular weight of the sol fraction decreased gradually. Meanwhile, the gel fraction of the crosslinked polyethylene was degenerated by a small dose of irradiation. The analysis of gaseous products revealed the formation of water, methanol, acetaldehyde and so forth from the irradiated grafted film. The grafting procedure and the subsequent irradiation of the grafted film did not affect the degree of crystallinity of the backbone polyethylene. The role played by the grafted polyacenaphthylene for endowing the radiation resistivity to polyethylene and its inherent limitation in effect were discussed from the structural point of view of the grafted film.

  9. Maxillofacial prostheses of chlorinated polyethylene.

    Science.gov (United States)

    May, P D

    1978-05-01

    There is clearly a need for maxillofacial prosthetic materials with improved properties. The chlorinated polyethylenes are thermoplastic elastomers which have particularly promising properties, and were used by us to prepare improved maxillofacial prostheses. Suitable CPE resins were compounded with other polymers and with pigments on a heated rubber mill to form thin sheets in a variety of shades. These were heated at 190 degrees C for 10 min and placed between heated linotype mold halves. The prosthesis was formed in a hand press. Sometimes heating and pressing were repeated. After cooling in water, the prosthesis was removed and hand-shaded with oil-soluble dyes. Physical properties were evaluated using standard techniques; skin irritation studies were conducted by 14-day insult patch tests on rabbits. Clinical evaluations were conducted on human volunteers. Parallel evaluations were conducted on commerically available materials for comparison. The CPE was superior to all of the three commerical materials in most properties, and comparable to the better of the three in the remaining properties. On balance, CPE was significantly superior. Early results indicate that the materials and techniques required are easily handled in the dental lab and that the final prosthesis has excellent aesthetic and patient acceptability.

  10. Morphology of polyethylene ski base materials.

    Science.gov (United States)

    Fischer, Jörg; Wallner, Gernot M; Pieber, Alois

    2010-03-01

    We used high-resolution Raman spectroscopy and differential scanning calorimetry for a comprehensive analysis of carbon black-filled polyethylene ski base grades at processing stages from the raw material to the structured ski base. Based on Raman mapping, we assessed the applicability of an advanced evaluation procedure for amorphous, disordered, and crystalline phase fractions of polyethylene for polyethylene extrusion and sinter grades. For sinter grades, a sufficient segregation between carbon black and polyethylene was confirmed, allowing for a comprehensive Raman spectroscopic morphological analysis. Significant morphological changes in polyethylene due to processing from the raw material to the semi-finished film and to the structured ski base were identified. Throughout the processing chain, we observed a decrease in crystallinity and an increase in the amorphous phase fraction. Although the raw material and the sintered semi-finished film exhibited a different but uniform polyethylene morphology, the morphological changes due to structuring of the ski base are limited to the top surface layer. The highest amorphous phase fractions were detected in the surface of the structured ski bases.

  11. A Coarse-Grained Model for Polyethylene Oxide and Polyethylene Glycol : Conformation and Hydrodynamics

    NARCIS (Netherlands)

    Lee, Hwankyu; de Vries, Alex H.; Marrink, Siewert-Jan; Pastor, Richard W.

    2009-01-01

    A coarse-grained (CG) model for polyethylene oxide (PEO) and polyethylene glycol (PEG) developed within the framework of the MARTINI CG force field (FF) using the distributions of bonds, angles, and dihedrals from the CHARMM all-atom FF is presented. Densities of neat low molecular weight PEO agree

  12. A Coarse-Grained Model for Polyethylene Oxide and Polyethylene Glycol : Conformation and Hydrodynamics

    NARCIS (Netherlands)

    Lee, Hwankyu; de Vries, Alex H.; Marrink, Siewert-Jan; Pastor, Richard W.

    2009-01-01

    A coarse-grained (CG) model for polyethylene oxide (PEO) and polyethylene glycol (PEG) developed within the framework of the MARTINI CG force field (FF) using the distributions of bonds, angles, and dihedrals from the CHARMM all-atom FF is presented. Densities of neat low molecular weight PEO agree

  13. Polyethylene Glycol Camouflaged Earthworm Hemoglobin

    Science.gov (United States)

    Moges, Selamawit; Nacharaju, Parimala; Roche, Camille; Dantsker, David; Palmer, Andre; Friedman, Joel M.

    2017-01-01

    Nearly 21 million components of blood and whole blood and transfused annually in the United States, while on average only 13.6 million units of blood are donated. As the demand for Red Blood Cells (RBCs) continues to increase due to the aging population, this deficit will be more significant. Despite decades of research to develop hemoglobin (Hb) based oxygen (O2) carriers (HBOCs) as RBC substitutes, there are no products approved for clinical use. Lumbricus terrestris erythrocruorin (LtEc) is the large acellular O2 carrying protein complex found in the earthworm Lumbricus terrestris. LtEc is an extremely stable protein complex, resistant to autoxidation, and capable of transporting O2 to tissue when transfused into mammals. These characteristics render LtEc a promising candidate for the development of the next generation HBOCs. LtEc has a short half-life in circulation, limiting its application as a bridge over days, until blood became available. Conjugation with polyethylene glycol (PEG-LtEc) can extend LtEc circulation time. This study explores PEG-LtEc pharmacokinetics and pharmacodynamics. To study PEG-LtEc pharmacokinetics, hamsters instrumented with the dorsal window chamber were subjected to a 40% exchange transfusion with 10 g/dL PEG-LtEc or LtEc and followed for 48 hours. To study the vascular response of PEG-LtEc, hamsters instrumented with the dorsal window chamber received multiple infusions of 10 g/dL PEG-LtEc or LtEc solution to increase plasma LtEc concentration to 0.5, then 1.0, and 1.5 g/dL, while monitoring the animals’ systemic and microcirculatory parameters. Results confirm that PEGylation of LtEc increases its circulation time, extending the half-life to 70 hours, 4 times longer than that of unPEGylated LtEc. However, PEGylation increased the rate of LtEc oxidation in vivo. Vascular analysis verified that PEG-LtEc showed the absence of microvascular vasoconstriction or systemic hypertension. The molecular size of PEG-LtEc did not change the

  14. Radiative Cooling With Pigmented Polyethylene Foils

    Science.gov (United States)

    Niklasson, Gunnar A.; Eriksson, Tord S.

    1989-03-01

    Polyethylene foils containing a nonabsorbing pigment can be suitable for radiative cooling because of their high reflectance of solar radiation combined with a high transmittance in the atmospheric window region in the thermal infrared. We have studied the optical properties in the wavelength range 0.3-50 μm of extruded polyethylene foils containing various amounts of 0.23 μm diameter Ti02 particles. It appears that the foils can prevent heating of an underlying material, even when directly illuminated by the sun. The total transmittance and reflectance of the Ti02-polyethylene foils were compared with multiple scattering calculations. Lorenz-Mie theory was used to model the scattering and absorption of a single TiO2 sphere. The single scattering parameters were then introduced into the four flux theory, by which the transmittance and reflectance were calculated. We find a satisfactory agreement between theory and experiments in most cases.

  15. CONFORMATIONAL PROPERTIES OF STRETCHED POLYETHYLENE CHAIN

    Institute of Scientific and Technical Information of China (English)

    Lin-xi Zhang; De-lu Zhao

    2000-01-01

    When polyethylene chains are stretched, the chains are regarded as being confined in an infinite cylinder with decreasing diameter. The conformational properties of polyethylene chains confined in an infinite cylinder are investigated by using rotational isomeric state model. Using the average conformational energy and entropy and the average length, we can determine the elastic force f, or the fraction of the energy term to the total force fe/f, where fe=(б)/(б)/(б). Comparisons with experimental data are also made. The results of these microscopic calculations are discussed in terms of the macroscopic phenomena of rubber elasticity.

  16. Exact Topological Twistons in Crystalline Polyethylene

    CERN Document Server

    Ventura, E; Bazeia, D

    2000-01-01

    We investigate the presence of topological twistons in crystalline polyethylene. We describe crystalline polyethylene with a model that couples the torsional and longitudinal degrees of freedom of the polymeric chain by means of a system of two real scalar fields. This model supports topological twistons, which are described by exact and stable topological solutions that appear when the interaction between torsional and longitudinal fields is polynomial, containing up to the sixth power in the fields. We calculate the energy of the topological twiston, and the result is in very good agreement with the value obtained via molecular simulation.

  17. Polyethylene glycol-electrolyte solution (PEG-ES)

    Science.gov (United States)

    Polyethylene glycol-electrolyte solution (PEG-ES) is used to empty the colon (large intestine, bowel) before a colonoscopy ( ... Polyethylene glycol-electrolyte solution (PEG-ES) comes as a powder to mix with water and take by mouth. ...

  18. Radiation-crosslinked polyethylene for wire and cable applications

    Science.gov (United States)

    Ueno, Keiji; Uda, Ikujiro; Tada, Shotaro

    Polyethylene is used as an insulation material for wires and cables because of its excellent electrical properties. Polyethylene is also a typical irradiated crosslinked polymer. The characteristics of irradiated polyethylene, the effects of density, molecular weight and so on, were studied.

  19. Hydrophilic poly(ethylene oxide)-aramide segmented block copolymers

    NARCIS (Netherlands)

    Araichimani, A.; ten Hoopen, Hermina W.M.; Gaymans, R.J.

    2009-01-01

    The present paper discusses block copolymers with segments of either poly(ethylene oxide), poly(propylene oxide), or mixtures of poly(ethylene oxide)/poly(propylene oxide) and monodisperse aramide segments. The length of the polyether segments as well as the concentration of polyethylene oxide was

  20. 21 CFR 178.3760 - Polyethylene glycol (400) monolaurate.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Polyethylene glycol (400) monolaurate. 178.3760... SANITIZERS Certain Adjuvants and Production Aids § 178.3760 Polyethylene glycol (400) monolaurate. Polyethylene glycol (400) monolaurate containing not more than 0.1 percent by weight of ethylene...

  1. Comparison of Polyethylene Glycol-Electrolyte Solution vs Polyethylene Glycol-3350 for the Treatment of Fecal Impaction in Pediatric Patients

    OpenAIRE

    Boles, Erin E.; Gaines, Cameryn L.; Tillman, Emma M.

    2015-01-01

    OBJECTIVES: The objective of this study was to evaluate the safety and efficacy of polyethylene glycol-electrolyte solution vs polyethylene glycol-3350 for the treatment of fecal impaction in pediatric patients.

  2. Neutron Compton scattering studies of stretched polyethylene

    CERN Document Server

    Gabrys, B J; Mayers, J; Kalhoro, M S

    2002-01-01

    The mean kinetic energy of hydrogen and carbon atoms in unstretched and stretched polyethylene samples has been measured by neutron Compton scattering. The vibrational frequencies of the ground state and torsional energies have been calculated and compared with the existing data and calculations. The results obtained on deuterated and non-deuterated samples are compared. (orig.)

  3. Polyethylene glycol-grafted polystyrene particles

    NARCIS (Netherlands)

    Meng, Fenghua; Engbers, Gerard H.M.; Feijen, Jan

    2004-01-01

    Densely pegylated particles that can serve as a model system for artificial cells were prepared by covalently grafting amino polyethylene glycol (PEG, molecular weight 3400 or 5000) onto carboxyl polystyrene particles (PS-COOH) using carbodiimide chemistry. PEG-modified particles (PS-PEG) were chara

  4. Evaluation of Paulownia elongata wood polyethylene composites

    Science.gov (United States)

    Paulownia wood flour (PWF), a byproduct of milling lumber, was employed as a bio-filler and blended with high density polyethylene (HDPE) via extrusion. Paulownia wood (PW) shavings were milled through a 1-mm screen then separated via shaking into various particle fractions using sieves (#30 - < #2...

  5. Dynamic compressive behavior of foamed polyethylene film

    Directory of Open Access Journals (Sweden)

    Tateyama Kohei

    2015-01-01

    Full Text Available The foamed film as the shock absorption material has attracted much attention because it is thin (100 μm ∼ 400 μm and has a closed cell structure. However, the dynamic mechanical properties have not been reported in the foamed film. The purpose of this study is to elucidate the compressive behavior of the foamed polyethylene film at the wide strain rate range. First, the new compressive test apparatus for the dynamic strain rate, the drop-weight testing machine with opposed load cell, was developed, which can be also evaluated the dynamic stress equilibrium of the specimen. It is confirmed that the compressive flow stress increased with increasing the strain rate, regardless of the film thickness. The foamed polyethylene film has the high strain rate sensitivity in the quasi-static deformation. On the other hand, there is almost no change of the strain rate sensitivity in the dynamic and the impact deformation. In order to investigate the mechanism of strain rate dependence, the foamed polyethylene film was observed by X-ray computed tomography scanner before and after compressive test. The fracture of the closed cell only occurred in the quasi-static deformation. It was clarified that the strain rate sensitivity of the foamed film depends strongly on that of the construction material, polyethylene.

  6. Polyethylene sterilization and production affects wear in total hip arthroplasties.

    Science.gov (United States)

    Faris, Philip M; Ritter, Merrill A; Pierce, Andrew L; Davis, Kenneth E; Faris, Gregory W

    2006-12-01

    Production and package sterilization techniques for the polyethylene used in acetabular components for total hip arthroplasties are known to affect wear. We considered three combinations of techniques: sterilization by radiation in inert gas with isostatically molded polyethylene, in inert gas and ram-extruded polyethylene, and in air with extruded polyethylene. The intent of this study was to confirm that molded polyethylene and polyethylene radiated in inert environments reduce wear rates in vivo, to determine the combination of methods with the least wear, and to determine how much variance in wear is attributable to these methods. We reviewed 150 consecutive total hip arthroplasties done in 133 patients using 28-mm cobalt-chrome femoral heads and polyethylene-lined, titanium, ring-locked acetabular components. The least wear occurred in gamma inert-molded polyethylene components. The mean volumetric wear rates were 52.12 mm3/year for gamma inert-molded, 62.32 mm3/year for gamma inert-extruded, and 66.09 mm3/year for gamma air-extruded polyethylene components. Relative risk assessment found gamma air-extruded and gamma inert-extruded polyethylene components to wear 16% and 11% more than gamma inert-molded polyethylene components, respectively. Gender, body mass index, and age accounted for the greatest amount of the explained variance in volumetric wear (57.5%, 21.6%, and 14.4, respectively), followed by angle of wear (3.4%), and sterilization and production technique (3.2%).

  7. Enzymatic hydrolysis of poly(ethylene furanoate).

    Science.gov (United States)

    Pellis, Alessandro; Haernvall, Karolina; Pichler, Christian M; Ghazaryan, Gagik; Breinbauer, Rolf; Guebitz, Georg M

    2016-10-10

    The urgency of producing new environmentally-friendly polyesters strongly enhanced the development of bio-based poly(ethylene furanoate) (PEF) as an alternative to plastics like poly(ethylene terephthalate) (PET) for applications that include food packaging, personal and home care containers and thermoforming equipment. In this study, PEF powders of various molecular weights (6, 10 and 40kDa) were synthetized and their susceptibility to enzymatic hydrolysis was investigated for the first time. According to LC/TOF-MS analysis, cutinase 1 from Thermobifida cellulosilytica liberated both 2,5-furandicarboxylic acid and oligomers of up to DP4. The enzyme preferentially hydrolyzed PEF with higher molecular weights but was active on all tested substrates. Mild enzymatic hydrolysis of PEF has a potential both for surface functionalization and monomers recycling. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Polyethylene imine-metal salt solid electrolyte

    Science.gov (United States)

    Davis, G. T.; Chiang, C. K.; Takahashi, T.

    1985-02-01

    This research pertains to the development of new solid battery electrolytes. An object of this invention is to provide polymeric electrolytes using a wider variety of metal salts. These and other objects of this invention are accomplished by providing: (1) a solid polymer electrolyte comprising: a matrix of linear poly(ethylene amine) having the formula (-CH2CH2NH-)n; and (2) a metal salt which is LiI, LiClO4, NaI, NaBr, KI, CsSCN, AgNO3, CuCl1, CoCl2, or Mg(ClO4)2, wherein the salt is dissolved in and distributed throughout the poly(ethylene amine) matrix and from more than zero to 0.10 moles of salt are used per mole of monomer repeat unit, (-CH2CH2NH-).

  9. Hydration of polyethylene glycol-grafted liposomes.

    OpenAIRE

    Tirosh, O; Barenholz, Y.; Katzhendler, J; Priev, A

    1998-01-01

    This study aimed to characterize the effect of polyethylene glycol of 2000 molecular weight (PEG2000) attached to a dialkylphosphatidic acid (dihexadecylphosphatidyl (DHP)-PEG2000) on the hydration and thermodynamic stability of lipid assemblies. Differential scanning calorimetry, densitometry, and ultrasound velocity and absorption measurements were used for thermodynamic and hydrational characterization. Using a differential scanning calorimetry technique we showed that each molecule of PEG...

  10. CHEMICAL MORPHOLOGY IN GRAFTING ACRYLAMIDE TO POLYETHYLENE

    Institute of Scientific and Technical Information of China (English)

    S. Termnak; K. Sintasanai; T. Amomsakchai; T. Nipithakul; D. Triampo

    2008-01-01

    The scanning force microscopy (SFM)/chemical force microscopy (CFM) were used to study the growth of grafted polyacrylamide (PAM) chains onto polyethylene (PE)-film with varying grafting time. Results from the CFM reveal reduced interaction between the probe and areas with grafted-PAM on the surface. The topography and the friction trace-minus-retrace (TMR) images are complementary to one another resulting from the reduced interaction of the probe that has specificity to chemical domains.

  11. Thermal Analyse sof Cross-Linked Polyethylene

    Directory of Open Access Journals (Sweden)

    Radek Polansky

    2007-01-01

    Full Text Available The paper summarizes results obtained during the structural analyses measurements (Differential Scanning Calorimetry DSC, Thermogravimetry TG, Thermomechanical analysis TMA and Fourier transform infrared spectroscopy FT-IR. The samples of cross-linked polyethylene cable insulation were tested via these analyses. The DSC and TG were carried out using simultaneous thermal analyzer TA Instruments SDT Q600 with connection of Fourier transform infrared spectrometer Nicolet 380. Thermomechanical analysis was carried out by TMA Q400EM TA Instruments apparatus.

  12. Phase behaviour of polyethylene knotted ring chains

    Institute of Scientific and Technical Information of China (English)

    Wen Xiao-Hui; Zhang Lin-Xi; Xia A-Gen; Chen Hong-Ping

    2011-01-01

    The phase behaviour of polyethylene knotted ring chains is investigated by using molecular dynamics simulations.In this paper, we focus on the collapse of the polyethylene knotted ring chain, and also present the results of linear and ring chains for comparison. At high temperatures, a fully extensive knot structure is observed. The mean-square radius of gyration per bond〈S2〉/(Nb2)and the shape factor(δ*)depend on not only the chain length but also the knot type.With temperature decreasing, chain collapse is observed, and the collapse temperature decreases with the chain length increasing. The actual collapse transition can be determined by the specific heat capacity Cv, and the knotted ring chain undergoes gas-liquid-solid-like transition directly. The phase transition of a knotted ring chain is only one-stage collapse, which is different from the polyethylene linear and ring chains. This investigation can provide some insights into the statistical properties of knotted polymer chains.

  13. Antibacterial performance of alginic acid coating on polyethylene film

    National Research Council Canada - National Science Library

    Karbassi, Elika; Asadinezhad, Ahmad; Lehocký, Marian; Humpolíček, Petr; Vesel, Alenka; Novák, Igor; Sáha, Petr

    2014-01-01

    Alginic acid coated polyethylene films were examined in terms of surface properties and bacteriostatic performance against two most representative bacterial strains, that is, Escherichia coli and Staphylococcus aureus...

  14. Patterned functional carbon fibers from polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, Marcus A [ORNL; Saito, Tomonori [ORNL; Brown, Rebecca H [ORNL; Kumbhar, Amar S [University of North Carolina, Chapel Hill; Naskar, Amit K [ORNL

    2012-01-01

    Patterned, continuous carbon fibers with controlled surface geometry were produced from a novel melt-processible carbon precursor. This portends the use of a unique technique to produce such technologically innovative fibers in large volume for important applications. The novelties of this technique include ease of designing and fabricating fibers with customized surface contour, the ability to manipulate filament diameter from submicron scale to a couple of orders of magnitude larger scale, and the amenable porosity gradient across the carbon wall by diffusion controlled functionalization of precursor. The geometry of fiber cross-section was tailored by using bicomponent melt-spinning with shaped dies and controlling the melt-processing of the precursor polymer. Circular, trilobal, gear-shaped hollow fibers, and solid star-shaped carbon fibers of 0.5 - 20 um diameters, either in self-assembled bundle form, or non-bonded loose filament form, were produced by carbonizing functionalized-polyethylene fibers. Prior to carbonization, melt-spun fibers were converted to a char-forming mass by optimizing the sulfonation on polyethylene macromolecules. The fibers exhibited distinctly ordered carbon morphologies at the outside skin compared to the inner surface or fiber core. Such order in carbon microstructure can be further tuned by altering processing parameters. Partially sulfonated polyethylene-derived hollow carbon fibers exhibit 2-10 fold surface area (50-500 m2/g) compared to the solid fibers (10-25 m2/g) with pore sizes closer to the inside diameter of the filaments larger than the sizes on the outer layer. These specially functionalized carbon fibers hold promise for extraordinary performance improvements when used, for example, as composite reinforcements, catalyst support media, membranes for gas separation, CO2 sorbents, and active electrodes and current collectors for energy storage applications.

  15. Polyethylene glycols (PEG) and related structures

    DEFF Research Database (Denmark)

    Wenande, Emily; Kroigaard, Mogens; Mosbech, Holger

    2015-01-01

    We describe hypersensitivity to polyethylene glycols (PEGs), with cross-reactivity to a structural analog, polysorbate 80, in a 69-year-old patient with perioperative anaphylaxis and subsequent, severe anaphylactic reactions to unrelated medical products. PEGs and PEG analogs are prevalent...... in the perioperative setting, contained in a wide range of products seldom suspected of causing hypersensitivity reactions and thus rarely documented in surgical/anesthetic records. We suggest routine testing for PEGs after perioperative anaphylaxis because exposure to these polymers often is significant....... Comprehensive brand name documentation on the anesthetic chart of all product exposures is central to identifying the responsible allergen....

  16. Thermoviscoelastic models for polyethylene thin films

    DEFF Research Database (Denmark)

    Li, Jun; Kwok, Kawai; Pellegrino, Sergio

    2016-01-01

    This paper presents a constitutive thermoviscoelastic model for thin films of linear low-density polyethylene subject to strains up to yielding. The model is based on the free volume theory of nonlinear thermoviscoelasticity, extended to orthotropic membranes. An ingredient of the present approach...... is that the experimentally inaccessible out-of-plane material properties are determined by fitting the model predictions to the measured nonlinear behavior of the film. Creep tests, uniaxial tension tests, and biaxial bubble tests are used to determine the material parameters. The model has been validated experimentally...

  17. Polyethylene terephthalate thin films; a luminescence study

    Science.gov (United States)

    Carmona-Téllez, S.; Alarcón-Flores, G.; Meza-Rocha, A.; Zaleta-Alejandre, E.; Aguilar-Futis, M.; Murrieta S, H.; Falcony, C.

    2015-04-01

    Polyethylene Terephthalate (PET) films doped with Rare Earths (RE3+) have been deposited on glass by spray pyrolysis technique at 240 °C, using recycled PET and (RE3+) chlorides as precursors. Cerium, terbium, dysprosium and europium were used as dopants materials, these dopants normally produce luminescent emissions at 450, 545, 573 and 612 nm respectively; the doped films also have light emissions at blue, green, yellow and red respectively. All RE3+ characteristic emissions were observed at naked eyes. Every deposited films show a high transmission in the visible range (close 80% T), films surfaces are pretty soft and homogeneous. Films thickness is around 3 μm.

  18. Sintering of ultra high molecular weight polyethylene

    Indian Academy of Sciences (India)

    Sangeeta Hambir; J P Jog

    2000-06-01

    Ultra high molecular weight polyethylene (UHMWPE) is a high performance polymer having low coefficient of friction, good abrasion resistance, good chemical resistance etc. It is used in shipbuilding, textile industries and also in biomedical applications. UHMWPE is processed by powder processing technique because of its high melt viscosity at the processing temperature. Powder processing technique involves compaction of polymeric powder under pressure and sintering of the preforms at temperature above its melting point. In this study, we report our results on compaction and sintering behaviour of two grades of UHMWPE with reference to the powder morphology, sintering temperatures and strength development.

  19. Greener routes for recycling of polyethylene terephthalate

    Directory of Open Access Journals (Sweden)

    A.M. Al-Sabagh

    2016-03-01

    Full Text Available The article reviews the different routes for recycling of polyethylene terephthalate. Chemical recycling processes are divided into six groups: methanolysis, glycolysis, hydrolysis, ammonolysis, aminolysis, and other methods. In a large collection of researches for the chemical recycling of PET, the primary objective is to increase the monomer yield while reducing the reaction time and/or carrying out the reaction under mild conditions. This article also presents the impact of the new recyclable catalysts such as ionic liquids on the future developments in the chemical recycling of PET.

  20. IMPORTANT DEGRADATIONS IN POLYETHYLENE TERAPHTALATE EXTRUSION PROCESS

    Directory of Open Access Journals (Sweden)

    Şule ALTUN

    2003-01-01

    Full Text Available Polyethylene terephthalate (PET is one of the most used thermo-plastic polymers. The total consumption of PET has been about 30 million tons in the year 2000. Polyester fibers constitute about 60 % of total synthetic fibers consumption. During extrusion, PET polymer is faced to thermal, thermo-oxidative and hydrolytic degradation, which result in severe reduction in its molecular weight, thereby adversely affecting its subsequent melt processability. Therefore, it is essential to understand degradation processes of PET during melt extrusion.

  1. Degradation of Green Polyethylene by Pleurotus ostreatus.

    Directory of Open Access Journals (Sweden)

    José Maria Rodrigues da Luz

    Full Text Available We studied the biodegradation of green polyethylene (GP by Pleurotus ostreatus. The GP was developed from renewable raw materials to help to reduce the emissions of greenhouse gases. However, little information regarding the biodegradation of GP discarded in the environment is available. P. ostreatus is a lignocellulolytic fungus that has been used in bioremediation processes for agroindustrial residues, pollutants, and recalcitrant compounds. Recently, we showed the potential of this fungus to degrade oxo-biodegradable polyethylene. GP plastic bags were exposed to sunlight for up to 120 days to induce the initial photodegradation of the polymers. After this period, no cracks, pits, or new functional groups in the structure of GP were observed. Fragments of these bags were used as the substrate for the growth of P. ostreatus. After 30 d of incubation, physical and chemical alterations in the structure of GP were observed. We conclude that the exposure of GP to sunlight and its subsequent incubation in the presence of P. ostreatus can decrease the half-life of GP and facilitate the mineralization of these polymers.

  2. Degradation of Green Polyethylene by Pleurotus ostreatus.

    Science.gov (United States)

    da Luz, José Maria Rodrigues; Paes, Sirlaine Albino; Ribeiro, Karla Veloso Gonçalves; Mendes, Igor Rodrigues; Kasuya, Maria Catarina Megumi

    2015-01-01

    We studied the biodegradation of green polyethylene (GP) by Pleurotus ostreatus. The GP was developed from renewable raw materials to help to reduce the emissions of greenhouse gases. However, little information regarding the biodegradation of GP discarded in the environment is available. P. ostreatus is a lignocellulolytic fungus that has been used in bioremediation processes for agroindustrial residues, pollutants, and recalcitrant compounds. Recently, we showed the potential of this fungus to degrade oxo-biodegradable polyethylene. GP plastic bags were exposed to sunlight for up to 120 days to induce the initial photodegradation of the polymers. After this period, no cracks, pits, or new functional groups in the structure of GP were observed. Fragments of these bags were used as the substrate for the growth of P. ostreatus. After 30 d of incubation, physical and chemical alterations in the structure of GP were observed. We conclude that the exposure of GP to sunlight and its subsequent incubation in the presence of P. ostreatus can decrease the half-life of GP and facilitate the mineralization of these polymers.

  3. Recycling of irradiated high-density polyethylene

    Science.gov (United States)

    Navratil, J.; Manas, M.; Mizera, A.; Bednarik, M.; Stanek, M.; Danek, M.

    2015-01-01

    Radiation crosslinking of high-density polyethylene (HDPE) is a well-recognized modification of improving basic material characteristics. This research paper deals with the utilization of electron beam irradiated HDPE (HDPEx) after the end of its lifetime. Powder of recycled HDPEx (irradiation dose 165 kGy) was used as a filler into powder of virgin low-density polyethylene (LDPE) in concentrations ranging from 10% to 60%. The effect of the filler on processability and mechanical behavior of the resulting mixtures was investigated. The results indicate that the processability, as well as mechanical behavior, highly depends on the amount of the filler. Melt flow index dropped from 13.7 to 0.8 g/10 min comparing the lowest and the highest concentration; however, the higher shear rate the lower difference between each concentration. Toughness and hardness, on the other hand, grew with increasing addition of the recycled HDPEx. Elastic modulus increased from 254 to 450 MPa and material hardness increased from 53 to 59 ShD. These results indicate resolving the problem of further recycling of irradiated polymer materials while taking advantage of the improved mechanical properties.

  4. Nanostructurization and thermal properties of polyethylenes' welds

    Science.gov (United States)

    Galchun, Anatoliy; Korab, Nikolay; Kondratenko, Volodymyr; Demchenko, Valeriy; Shadrin, Andriy; Anistratenko, Vitaliy; Iurzhenko, Maksym

    2015-03-01

    As it is known, polyethylene (PE) is one of the common materials in the modern world, and PE products take the major share on industrial and trade markets. For example, various types of technical PE like PE-63, PE-80, and PE-100 have wide industrial applications, i.e., in construction, for pipeline systems etc. A rapid development of plastics industry outstrips detailed investigation of welding processes and welds' formation mechanism, so they remain unexplored. There is still no final answer to the question how weld's microstructure forms. Such conditions limit our way to the understanding of the problem and, respectively, prevent scientific approaches to the welding of more complicated (from chemical point of view) types of polymers than PE. Taking into account state-of-the-art, the article presents results of complex studies of PE weld, its structure, thermophysical and operational characteristics, analysis of these results, and basing on that some hypotheses of welded joint and weld structure formation. It is shown that welding of dissimilar types of polyethylene, like PE-80 and PE-100, leads to the formation of better-ordered crystallites, restructuring the crystalline phase, and amorphous areas with internal stresses in the welding zone.

  5. Degradation of Green Polyethylene by Pleurotus ostreatus

    Science.gov (United States)

    da Luz, José Maria Rodrigues; Paes, Sirlaine Albino; Ribeiro, Karla Veloso Gonçalves; Mendes, Igor Rodrigues; Kasuya, Maria Catarina Megumi

    2015-01-01

    We studied the biodegradation of green polyethylene (GP) by Pleurotus ostreatus. The GP was developed from renewable raw materials to help to reduce the emissions of greenhouse gases. However, little information regarding the biodegradation of GP discarded in the environment is available. P. ostreatus is a lignocellulolytic fungus that has been used in bioremediation processes for agroindustrial residues, pollutants, and recalcitrant compounds. Recently, we showed the potential of this fungus to degrade oxo-biodegradable polyethylene. GP plastic bags were exposed to sunlight for up to 120 days to induce the initial photodegradation of the polymers. After this period, no cracks, pits, or new functional groups in the structure of GP were observed. Fragments of these bags were used as the substrate for the growth of P. ostreatus. After 30 d of incubation, physical and chemical alterations in the structure of GP were observed. We conclude that the exposure of GP to sunlight and its subsequent incubation in the presence of P. ostreatus can decrease the half-life of GP and facilitate the mineralization of these polymers. PMID:26076188

  6. Polyethylene magnetic nanoparticle: a new magnetic material for biomedical applications

    Science.gov (United States)

    Chatterjee, Jhunu; Haik, Yousef; Chen, Ching-Jen

    2002-05-01

    Polyethylene magnetic nanoparticles were synthesized by nonsolvent and temperature induced crystallization along with ultrasonication. Low molecular weight polyethylene wax and maghemite were used for forming the composite particles. These particles were further coated with avidin. The nanoparticles are characterized using STEM, AFM and SQUID. Nanomagnetic particles were found to have two distinct morphologies and have superparamagnetic properties.

  7. 21 CFR 177.1630 - Polyethylene phthalate polymers.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Polyethylene phthalate polymers. 177.1630 Section... (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as... polymers. Polyethylene phthalate polymers identified in this section may be safely used as, or...

  8. 40 CFR 721.6493 - Amidoamine modified polyethylene glycol (generic).

    Science.gov (United States)

    2010-07-01

    ... Specific Chemical Substances § 721.6493 Amidoamine modified polyethylene glycol (generic). (a) Chemical... as an amidoamine modified polyethylene glycol (PMN P-99-0645) is subject to reporting under this... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Amidoamine modified...

  9. Porous polyethylene implants in facial reconstruction: outcome and complications

    NARCIS (Netherlands)

    Ridwan-Pramana, A.; Wolff, J.; Raziei, A.; Ashton-James, C.E.; Forouzanfar, T.

    2015-01-01

    The aim of the present study was to assess the indications, results and complications of patients treated with porous polyethylene (Medpor®) implants in the Department of Oral and Maxillofacial Surgery of VU Medical Centre, Amsterdam over 17 years. A total of 69 high-density porous polyethylene

  10. Polyethylene glycol: a game-changer laxative for children.

    Science.gov (United States)

    Alper, Arik; Pashankar, Dinesh S

    2013-08-01

    Constipation is a common problem in children worldwide. It can also be a chronic problem persisting for many months to years. Successful treatment of constipation requires long-term use of laxatives. Commonly used laxatives in children include milk of magnesia, lactulose, mineral oil, and polyethylene glycol. Compared with other laxatives, polyethylene glycol (with and without electrolytes) is a relatively new laxative used during the last decade. Recent studies report excellent efficacy and safety of polyethylene glycol for the long-term treatment of constipation in children. Because of excellent patient acceptance, polyethylene glycol has become a preferred choice of laxative for many practitioners. This article reviews the recently published pediatric literature on biochemistry, efficacy, safety, patient acceptance, and pharmacoeconomics of polyethylene glycol.

  11. Preparation and Electrical Property of Polypyrrole-Polyethylene Composite

    Science.gov (United States)

    Yoshino, Katsumi; Yin, Xiao Hong; Morita, Shigenori; Nakanishi, Yutaka; Nakagawa, Shinichi; Yamamoto, Hideo; Watanuki, Toshiro; Isa, Isao

    1993-02-01

    Polypyrrole-polyethylene composites have been prepared by pressing the mixture of polypyrrole coated and non-coated polyethylene spheres. Electrical conductivity is enhanced by more than 16 orders of magnitude and its activation energy decreases remarkably at concentration of polypyrrole coated polyethylene above around 10-20%, which corresponds to effective polypyrrole concentration of 0.1-0.2%. These characteristics can be explained by a percolation model. That is, at this concentration electrodes are bridged by conducting channel of doped polypyrrole. Thermoelectric power increases in proportion to absolute temperature and is independent on concentration of polypyrrole coated polyethylene sphere above 30%, which support the percolation model. The electrical property of this polypyrrole-polyethylene composite is found to be stable up to 160°C. The application of this composite to the semiconducting layer of a cable has been proposed.

  12. Separation of polyethylene glycols and maleimide-terminated polyethylene glycols by reversed-phase liquid chromatography under critical conditions.

    Science.gov (United States)

    Wei, Yanzhen; Zhuo, Renxi; Jiang, Xulin

    2016-11-01

    The separation of polyethylene glycols and maleimide-substituted polyethylene glycol derivatives based on the number of maleimide end-groups under critical liquid chromatography conditions has been investigated on a reversed-phase column. The critical solvent compositions for nonfunctional polyethylene glycols and bifunctional maleimide-substituted polyethylene glycols were determined to be identical at about 40% acetonitrile in water on a reversed-phase octadecyl carbon chain-bonded silica column using mixtures of acetonitrile and water of varying composition as the mobile phase at 25°C. The maleimide-functionalized polyethylene glycols were successfully separated according to maleimide functionality (with zero, one, two, or three maleimide end-groups, respectively) under the critical isocratic elution conditions without obvious effect of molar mass. The separation was mainly due to the hydrophobic interaction between the maleimide end-groups and the column packing. Off-line matrix-assisted laser desorption/ionization time of flight mass spectrometry was used to identify the repeating units and, especially, the end-groups of the maleimide-substituted polyethylene glycols. Liquid chromatography analysis at critical conditions could provide useful information to optimize the synthesis of functional polyethylene glycols. To our knowledge, this is the first report of the baseline separation of maleimide-functionalized polyethylene glycols based on the functionality independent of the molar mass without derivatization by isocratic elution.

  13. A thermoelectric voltage effect in polyethylene oxide

    CERN Document Server

    Martin, B; Kliem, H

    2003-01-01

    The conductivity of polyethylene oxide (PEO) is described with a three-dimensional hopping model considering electrostatic interactions between the ions. Ions fluctuate over energy-barriers in a multi-well potential. To decide whether positive or negative charges are responsible for this conductivity, the thermoelectric voltage is measured. The samples are embedded between two aluminium-electrodes. The oxide on the interface between the electrodes and the PEO serves as a blocking layer. The temperature of each electrode is controlled by a Peltier element. A temperature step is applied to one electrode by changing the temperature of one of the Peltier elements. Due to this temperature gradient, the mobile charges fluctuate thermally activated from the warmer side to the colder side of the sample. The direction of the measured thermoelectric voltage indicates the type of mobile charges. It is found that positive charges are mobile. Further, it is shown that the absolute value of the thermoelectric voltage depen...

  14. Immediate-type hypersensitivity to polyethylene glycols

    DEFF Research Database (Denmark)

    Wenande, E; Garvey, L H

    2016-01-01

    Polyethylene glycols (PEGs) or macrogols are polyether compounds widely used in medical and household products. Although generally considered biologically inert, cases of mild to life-threatening immediate-type PEG hypersensitivity are reported with increasing frequency. Nevertheless, awareness...... of PEG's allergenic potential remains low, due to a general lack of suspicion towards excipients and insufficient product labelling. Information on immediate-type reactions to PEG is limited to anecdotal reports, and the potential for PEG sensitization and cross-sensitization to PEGylated drugs...... to a range of unrelated products in hospital and at home. Increased awareness of PEG prevalence, PEG hypersensitivity, and improved access to PEG allergy testing, should facilitate earlier diagnosis and reduce the risk of inadvertent re-exposure. This first comprehensive review provides practical information...

  15. Depolymerization of polyethylene terephthalate in supercritical methanol

    Science.gov (United States)

    Goto, Motonobu; Koyamoto, Hiroshi; Kodama, Akio; Hirose, Tsutomu; Nagaoka, Shoji

    2002-11-01

    The degradation of polyethylene terephthalate (PET) in supercritical methanol was investigated with the aim of developing a process for chemical recycling of waste plastics. A batch reactor was used at temperatures of 573-623 K under an estimated pressure of 20 MPa for a reaction time of 2-120 min. PET was decomposed to its monomers, dimethyl terephthalate and ethylene glycol, by methanolysis in supercritical methanol. The reaction products were analysed using size-exclusion chromatography, gas chromatography-mass spectrometry, and reversed-phase liquid chromatography. The molecular weight distribution of the products was obtained as a function of reaction time. The yields of monomer components of the decomposition products including by-products were measured. Continuous kinetics analysis was performed on the experimental data.

  16. Polyethylene oxide hydration in grafted layers

    Science.gov (United States)

    Dormidontova, Elena; Wang, Zilu

    Hydration of water soluble polymers is one of the key-factors defining their conformation and properties, similar to biopolymers. Polyethylene oxide (PEO) is one of the most important biomedical-applications polymers and is known for its reverse temperature solubility due to hydrogen bonding with water. As in many practical applications PEO chains are grafted to surfaces, e.g. of nanoparticles or planar surfaces, it is important to understand PEO hydration in such grafted layers. Using atomistic molecular dynamic simulations we investigate the details of molecular conformation and hydration of PEO end-grafted to gold surfaces. We analyze polymer and water density distribution as a function of distance from the surface for different grafting densities. Based on a detailed analysis of hydrogen bonding between polymer and water in grafted PEO layers, we will discuss the extent of PEO hydration and its implication for polymer conformation, mobility and layer properties. This research is supported by NSF (DMR-1410928).

  17. Polyethylene glycol-grafted polystyrene particles.

    Science.gov (United States)

    Meng, Fenghua; Engbers, Gerard H M; Feijen, Jan

    2004-07-01

    Densely pegylated particles that can serve as a model system for artificial cells were prepared by covalently grafting amino polyethylene glycol (PEG, molecular weight 3400 or 5000) onto carboxyl polystyrene particles (PS-COOH) using carbodiimide chemistry. PEG-modified particles (PS-PEG) were characterized by determination of the PEG surface concentration, zeta-potential, size, and morphology. Under optimized grafting conditions, a dense "brush-like" PEG layer was formed. A PEG surface concentration of approximately 60 pmol/cm2, corresponding with an average distance between grafted PEG chains of approximately 17 A can be realized. It was shown that grafting of PEG onto PS-COOH reduced the adsorption of proteins from human plasma (85 vol %) in phosphate-buffered saline up to 90%.

  18. Role of polyethylene glycol in childhood constipation.

    Science.gov (United States)

    Phatak, Uma Padhye; Pashankar, Dinesh S

    2014-09-01

    Constipation is a common and chronic problem in children worldwide. Long-term use of laxatives is necessary for successful treatment of chronic constipation. Commonly used laxatives in children include milk of magnesia, lactulose, mineral oil, and polyethylene glycol (PEG). Recent studies report the efficacy and safety of PEG for the long-term treatment of constipation in children. Because of its excellent patient acceptance, PEG is being used widely in children for constipation. In this commentary, we review the recently published pediatric literature on the efficacy, safety, and patient acceptance of PEG. We also assess the role of PEG in childhood constipation by comparing it with other laxatives in terms of efficacy, safety, patient acceptance, and cost.

  19. Renewable polyethylene mimics derived from castor oil.

    Science.gov (United States)

    Türünç, Oĝuz; Montero de Espinosa, Lucas; Meier, Michael A R

    2011-09-01

    An increasing number of reports on the syntheses of carbohydrate- and plant oil-based polymers has been published in ongoing efforts to produce plastic materials from renewable resources. Although many of these polymers are biodegradable and this is a desirable property for certain applications, in some cases non-degradable polymers are needed for long-term use purposes. Polyolefins are one of the most important classes of materials that have already taken their places in our daily life. On the other hand, their production relies on fossil resources. Therefore, within this contribution, we discuss synthetic routes toward a number of polyethylene mimics derived from fatty acids via thiol-ene and ADMET polymerization reactions in order to establish more sustainable routes toward this important class of polymers. Two different diene monomers were thus prepared from castor oil derived platform chemicals, their polymerization via the two mentioned routes was optimized and compared to each other, and their thermal properties were investigated.

  20. Luminescence in crosslinked polyethylene at elevated temperatures

    Science.gov (United States)

    Bamji, S. S.; Bulinski, A. T.; Suzuki, H.; Matsuki, M.; Iwata, Z.

    1993-10-01

    Electrical treeing is often responsible for the breakdown of insulating materials used in power apparatus such as high-voltage transformers, cables, and capacitors. Insulation, such as crosslinked polyethylene (XLPE), used in underground high-voltage cables usually operates at temperatures above ambient. This paper describes the characteristics of luminescence, emitted prior to electrical tree inception, at a crosslinked polyethylene-semiconducting material (XLPE-semicon) interface held above room temperature. Use of a sensitive light detection system showed that XLPE subjected to elevated temperatures emits luminescence even without voltage application. This light was attributed to thermoluminescence which decreased with the decrease in the concentration of the crosslinking by-products present in the polymer. The spectra of thermoluminescence were only in the visible range. On the other hand, electroluminescence occurred when the XLPE-semicon interface was held above room temperature and subjected to high electric stress. This light did not depend on the concentration of the crosslinking by-products and the spectra of electroluminescence were in the visible and the ultraviolet ranges. It is proposed that XLPE-semicon interface held at elevated temperature and subjected to long-term voltage application initially emits both thermoluminescence and electroluminescence. As the crosslinking by-products exude out of the polymer, thermoluminescence decreases with time and ultimately ceases, but electroluminescence occurs as long as the voltage is applied to the polymer. Although the intensity of electroluminescence emitted at high temperature was lower than that emitted at ambient, sufficient ultraviolet radiation was emitted. The ultraviolet radiation could photodegrade the polymer and lead to electrical tree inception.

  1. Quantification of branching in model three-arm star polyethylene

    KAUST Repository

    Ramachandran, Ramnath

    2012-01-24

    The versatility of a novel scaling approach in quantifying the structure of model well-defined 3-arm star polyethylene molecules is presented. Many commercial polyethylenes have long side branches, and the nature and quantity of these branches varies widely among the various forms. For instance, low-density polyethylene (LDPE) is typically a highly branched structure with broad distributions in branch content, branch lengths and branch generation (in hyperbranched structures). This makes it difficult to accurately quantify the structure and the inherent structure-property relationships. To overcome this drawback, model well-defined hydrogenated polybutadiene (HPB) structures have been synthesized via anionic polymerization and hydrogenation to serve as model analogues to long-chain branched polyethylene. In this article, model 3-arm star polyethylene molecules are quantified using the scaling approach. Along with the long-chain branch content in polyethylene, the approach also provides unique measurements of long-chain branch length and hyperbranch content. Such detailed description facilitates better understanding of the effect of branching on the physical properties of polyethylene. © 2012 American Chemical Society.

  2. The Application of Lights-Conversed Polyethylene Film for Agriculture

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Lanthanum-rhodamine (6G and B) complexes were synthesized by Rheological Phase Reaction Method. Lanthanum-rhodamine (6G and B) complexes doped polyethylene films which have a function of lights-conversion were prepared. The emission and excitation spectra were measured. The experiments of growing seedling and culture were carried out in the shed built with doped and undoped polyethylene films. Lanthanum-rhodamine doped polyethylene films which have a function of lights-conversion can efficiently convert the green light in the sunlight to the red light for photosynthesis of crops, to promote the maturing of crops and raise the yield of crops.

  3. Monoblock versus modular polyethylene insert in uncemented total knee arthroplasty

    DEFF Research Database (Denmark)

    Andersen, Mikkel Rathsach; Winther, Nikolaj; Lind, Thomas;

    2016-01-01

    Background and purpose - Backside wear of the polyethylene insert in total knee arthroplasty (TKA) can produce clinically significant levels of polyethylene debris, which can lead to loosening of the tibial component. Loosening due to polyethylene debris could theoretically be reduced in tibial...... as maximum total point motion (MTPM)) of the 2 different implant designs. Results - We did not find any statistically significant difference in MTPM between the groups at 3 months (p = 0.2) or at 6 months (p = 0.1), but at 12 and 24 months of follow-up there was a significant difference in MTPM of 0.36 mm (p...

  4. 40 CFR 721.7255 - Polyethyleneamine crosslinked with substituted polyethylene glycol (generic).

    Science.gov (United States)

    2010-07-01

    ... substituted polyethylene glycol (generic). 721.7255 Section 721.7255 Protection of Environment ENVIRONMENTAL... substituted polyethylene glycol (generic). (a) Chemical substance and significant new uses subject to... substituted polyethylene glycol with substituted polyethylene glycol (PMN P-01-833) is subject to...

  5. Processable conductive graphene/polyethylene nanocomposites: Effects of graphene dispersion and polyethylene blending with oxidized polyethylene on rheology and microstructure

    Energy Technology Data Exchange (ETDEWEB)

    Iqbal, Muhammad Z.; Abdala, Ahmed A.; Mittal, Vikas; Seifert, Sӧnke; Herring, Andrew M.; Liberatore, Matthew W.

    2016-08-01

    Poor dispersion of graphene in non-polar polymer matrices creates composites with limited applications. A method to improve the dispersion of graphene in polyethylene (PE) via blending PE with oxidized PE (OPE) is examined. Graphene was produced by simultaneous thermal exfoliation and reduction of graphite oxide. Nanocomposites of graphene with PE as well as graphene with PE/OPE-blends were prepared by solvent blending. Improved dispersion of graphene in PE/OPE blends substantially decreases percolation from both rheological (0.3 vol%) and electrical (0.13 vol%) measurements compared to neat PE nanocomposites (1 and 0.29 vol%), respectively. A universal Brownian dispersion of graphene in polymers was concluded similar to that of nanotubes, following the Doi-Edwards theory. Micromechanical models, such as Mori-Tanaka and Halpin-Tsai models, modeled the mechanical properties of the nanocomposites. The nanocomposites microstructure, studied by small angle x-ray scattering, confirmed better dispersion of graphene at lower loadings and the formation of surface fractals in the blend/graphene nanocomposites; whereas only mass fractals were observed in neat PE/graphene nanocomposites.

  6. Effect of polyethylene glycol on electrochemically deposited trivalent chromium layers

    Institute of Scientific and Technical Information of China (English)

    Joo-Yul LEE; Man KIM; Sik-Chol KWON

    2009-01-01

    The structural characteristics of the trivalent chromium deposits and their interfacial behavior in the plating solution with and without polyethylene glycol molecules were observed by using various electrochemical methods such as cyclic voltammetry, open circuit potential transition, electrochemical impedance spectroscopy, scanning electron microscopy and X-ray photoelectron spectrometry. It is shown that the polyethylene glycol molecules make the reductive current density lower in the trivalent chromium plating system and promote a hydrogen evolution reaction through their adsorption on the electrode surface. And the trivalent chromium layer formed from the polyethylene glycol-containing solution has somewhat higher density of cracks on its surface and results in a lower film resistance, lower polarization resistance, and higher capacitance in a corrosive atmosphere. It is also revealed that the formation of chromium carbide layer is facilitated in the presence of polyethylene glycol, which means easier electrochemical codeposition of chromium and carbon, not single chromium deposition.

  7. The Interlayer Stress Analysis of Polyethylene-steel Composite Pipes

    Institute of Scientific and Technical Information of China (English)

    WEI Xu-guang

    2016-01-01

    Polyethylene-steel Composite Pipes is widely used in conveying corrosive media occasions, but the pipe may lose effectiveness in the process of transporting hot and cold media, so the research of stress distribution and variation in polyethylene-steel composite pipes is very necessary.This article first assume that a thin adhesive layer is in between the polyethylene and steel, the adhesive layer along the axial shear stress is the major cause of the polyethylene layer and the steel pipe off sticky.Secondly, we use a method of finite element to computer simulation by ANSYS, and verify initial assumptions. Finally, based on simulation data, we analyse the adhesive layer stress distribution and the variation with different parameters to change.Through the above research, preliminarily summarize the variation and distribution of interlaminar stress, and provide technical support for future design and process improvement of polyethylenesteel pipe.

  8. Histopathology of biocompatible hydroxylapatite-polyethylene composite in ossiculoplasty

    NARCIS (Netherlands)

    Meijer, AGW; Segenhout, HM; Albers, FWJ; van de Want, HJL

    2002-01-01

    The biocompatibility of hydroxylapatite-polyethylene composite implants (HAPEX, Smith and Nephew) was investigated in this study. Eleven middle ear prostheses, removed during revision surgery, have been examined by light microscopy, transmission electron microscopy and scanning electron microscopy.

  9. Mechanical Performance of Rotomoulded Wollastonite-Reinforced Polyethylene Composites

    Science.gov (United States)

    Yuan, Xiaowen; Easteal, Allan J.; Bhattacharyya, Debes

    This paper describes the development of a new processing technology for rotational moulding of wollastonite microfibre (WE) reinforced polyethylene (PE). Manufacturing wollastonite-polyethylene composites involved blending, compounding by extrusion, and granulating prior to rotational moulding. The properties of the resulting composites were characterised by tensile and impact strength measurements. The results show that tensile strength increases monotonically with the addition of wollastonite fibres, but impact strength is decreased. In addition, the processability is also decreased after adding more than 12 vol% WE because of increased viscosity. The effects of a coupling agent, maleated polyethylene (MAPE), on the mechanical performance and processability were also investigated. SEM analysis reveals good adhesion between the fibre reinforcements and polyethylene matrix at the fracture surface with the addition of MAPE. It is proposed that fillers with small particles with high aspect ratio (such as wollastonite) provide a large interfacial area between the filler and the polymer matrix, and may influence the mobility of the molecular chains.

  10. Effect of drought stress induced by polyethylene glycol (PEG) on ...

    African Journals Online (AJOL)

    Effect of drought stress induced by polyethylene glycol (PEG) on germination indices in corn ( Zea mays L.) hybrids. ... African Journal of Biotechnology ... and success in this stage is dependent on moisture content of soil at time of planting.

  11. Tensile mechanical response of polyethylene – clay nanocomposites.

    Directory of Open Access Journals (Sweden)

    2007-03-01

    Full Text Available In this work we report on the microstructural and the mechanical characteristics of high density polyethylene (HDPE-clay nanocomposites, with particular attention to the creep behaviour. The samples were prepared through melt compounding, using two high-density polyethylenes with different melt flow rate (MFR, two different organo-modified clays, and changing the relative amount of a polyethylene grafted with maleic anhydride (PEgMA compatibilizer. The intercalation process is more effective as the matrix melt viscosity decreases (higher MFR, while the clay interlamellar spacing increases as the compatibilizer amount increases. The relative stiffness of the nanocomposites increases with the addition of clay, with a limited enhancement of the relative yield stress. The better intercalation obtained by the addition of the compatibilizer is not accompanied by a concurrent improvement of the tensile mechanical properties. The creep resistance is enhanced by the introduction of clay, with an appreciable dependence on both the polyethylene and the clay type.

  12. Primary radiation defect production in polyethylene and cellulose.

    Science.gov (United States)

    Polvi, Jussi; Luukkonen, Petri; Nordlund, Kai; Järvi, Tommi T; Kemper, Travis W; Sinnott, Susan B

    2012-11-29

    Irradiation effects in polyethylene and cellulose were examined using molecular dynamics simulations. The governing reactions in both materials were chain scissioning and generation of small hydrocarbon and peroxy radicals. Recombination of chain fragments and cross-linking between polymer chains were found to occur less frequently. Crystalline cellulose was found to be more resistant to radiation damage than crystalline polyethylene. Statistics on radical formation are presented and the dynamics of the formation of radiation damage discussed.

  13. Polymerization of Pyrrole and Thiophene on Polyethylene Adipate Electrodes

    OpenAIRE

    Erturan, Seyfettin; TORAMAN, Burcu YALVAÇ and Sena

    1998-01-01

    Polymerizations of pyrrole and thiophene on a platinum foil coated by polyethylene adipate (PEA) were carried out in acetonitrile by electrochemical methods. Different compositions of semi-conducting composite films of PEA/Polypyrrole(PPy), PEA/Polythiophene(PT) were prepared by the electrochemical polymerization of pyrrole and thiophene on PEA electrode. The polymerization was possible only for a certain thickness of the polyethylene adipate(PEA) on the platinum. Conductivities of PEA/PPy, P...

  14. The mechanical properties of density graded hemp/polyethylene composites

    Science.gov (United States)

    Dauvegis, Raphaël; Rodrigue, Denis

    2015-05-01

    In this work, the production and mechanical characterization of density graded biocomposites based on high density polyethylene and hemp fibres was performed. The effect of coupling agent addition (maleated polyethylene) and hemp content (0-30%) was studied to determine the effect of hemp distribution (graded content) inside the composite (uniform, linear, V and Λ). Tensile and flexural properties are reported to compare the structures, especially in terms of their stress-strain behaviors under tensile loading.

  15. Diamagnetism and Strucure of Nitric Acid-Treated Bulk Polyethylene

    OpenAIRE

    Ania, F.; Baltá Calleja, F. J.; Cagiao, M.E.

    1982-01-01

    An alternative procedure to examine the nature of the end product of nitric-acid-treated bulk polyethylene involving the measurement of the diamagnetic susceptibility is reported. This simple non-destructive method complements previous results obtained by means of IR spectroscopy. Thus after selectively removing the surface layer of the polyethylene lamellae with nitric acid (t > 50h) the diamagnetic susceptibility substantially decreases to values wich are consistent with tilted paraff...

  16. Polyethylene terephthalate degradation under reactor neutron irradiation

    Science.gov (United States)

    Chikaoui, K.; Izerrouken, M.; Djebara, M.; Abdesselam, M.

    2017-01-01

    This paper is devoted to study the defects generated by reactor neutron in polyethylene terephthalate (PET) films. The explored fast neutron fluence ranges from 2.02×1016 to 2.07×1018 n cm-2. The induced damages were investigated using ultraviolet-visible spectrophotometry (UV-vis), Fourier Transform Infrared spectrometry (FTIR) and X-ray diffraction (XRD). The UV-vis spectra show important changes indicating the degradation of the chemical structure and the creation of new chromophores. FTIR spectra reveal that the intensities of the different absorption bands decrease linearly under fast neutron irradiation. The internal reference band at 1410 cm-1 is used to follow the overall damage during irradiation. The 1342 cm-1 band corresponding to CH2 wagging of trans conformation of crystalline phase show a sharpe linear decrease as the fast neutrons fluence goes up. The creation of the monosubstituted benzene, investigated using the 1610 cm-1 band. It shows a linear increase with fast neutron fluence. It is found from XRD analysis that the diffraction peak (100) intensity is drastically reduced after irradiation at 2.02×1016 n cm-2.

  17. On Crystallization in Polypropylene-Polyethylene Blends

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Blends of polypropylene(PP) and low-density polyethylene (LDPE) have beencrystallized to form open structures(“cluster spherulites”) where the droplets of the minorityPP are bridged by PP lamellae which have grown in the LDPE-rich matrix. These are studiedby permanganic etching followed by electron and optical microscopies. Two similar PP typesare compared, one synthesized with Ziegler-Natta catalyst and one with metallocenecatalyst. The metallocene-catalysed material crystallized much more slowly due to thepresence of regio defects in the chains, even though the overall concentration of tacticitydefects in the Ziegler-Natta material is much higher. A mechanism involving reversal ofhelical direction at the regio defect interfering with the regular chain packing in the crystal issuggested. Growth of “cluster spherulites” is faster in regions where low molecular weightmaterial is concentrated. It is slower where droplets are larger, and this is attributed tocompetition between PP lamellar growth in the matrix and diffusion of PP to alreadycrystallized droplets.

  18. Polarimetric studies of polyethylene terephtalate flexible substrates

    Science.gov (United States)

    Stchakovsky, M.; Garcia-Caurel, E.; Warenghem, M.

    2008-12-01

    Polymer sheets are currently used worldwide in a wide range of applications. The manufacturing process of these sheets involves extruding machines that stretch the material in both lateral and longitudinal directions with respect to the machine direction, thus inducing birefringence. In most cases, the film obtained is optically biaxial. Polarimetric spectroscopy (Ellipsometry and Mueller Matrix) combined with conoscopic observation are the methods of choice to study these properties. In this work we report an analysis of commercially available polyethylene terephtalate (PET) films used as substrate for food packaging as well as for embedded electronic devices such as solar cells or flexible displays. Initial observation of these films through polarizing microscope in conoscopic mode reveals first the trace of optical axis plane with respect to the film surface and second, whether the optical axis is acute or not. This preliminary study allows optimal sample positioning for further polarimetric studies. The measurements and modelling are done in both reflection and transmission mode on several spectroscopic polarimetric setups from UV to NIR. The models give as a main result, the dielectric tensor of the film as well as its orientation with respect to the laboratory reference frame.

  19. Final report on the safety assessment of polyethylene.

    Science.gov (United States)

    2007-01-01

    Polyethylene is an ethylene polymer used for a variety of purposes in cosmetics as an abrasive, adhesive, binder or bulking agent, an emulsion stabilizer, a film former, an oral care agent, and as a nonaqueous viscosity-increasing agent. Polyethylene is also used in food packaging materials and medical products, including prosthetics. The molecular weight of Polyethylene as used in cosmetics varies over a wide range. The lowest reported molecular weight is 198 Daltons and the highest is 150,000. In any given polymer preparation, there can be a broad range of molecular weights. Cellular and tissue responses to Polyethylene, determined as part of implant biocompatibility testing, include fibrous connective tissue build-up around the implant material that varies as a function of the physical form of the implant material. Specific assays for osteoblast proliferation and collagen synthesis demonstrated a reduction as a function of exposure to Polyethylene particles that is inversely related to particle size. The effect of Polyurethane particles on monocyte-derived macrophages, however, had a stimulatory effect, prolonging the survival of these cells in culture. The LD50 for Polyethylene, with an average molecular weight of 450, in rats was > 2000 mg/kg. For Polyethylene with an average molecular weight of 655, the LD50 was > 5.0 g/kg. Toxicity testing in rats shows no adverse effects at Polyethylene (molecular weight not given) doses of 7.95 g/kg or at 1.25%, 2.50%, or 5.00% in feed for 90 days. Dermal irritation studies on rabbits in which 0.5 g of Polyethylene (average molecular weight of 450) was administered in 0.5 ml of water caused no irritation or corrosive effects; Polyethylene with an average molecular weight of 655 was a mild irritant. Polyethylene (average molecular weight of 450) did not cause dermal sensitization in guinea pigs tested with 50% Polyethylene (w/w) in arachis oil BP. Polyethylene, with a molecular weight of 450 and a molecular weight of 655

  20. Surface modification of poly(ethylene terephthalate) by plasma polymerization of poly(ethylene glycol).

    Science.gov (United States)

    Sakthi Kumar, D; Fujioka, Masayori; Asano, Kentaro; Shoji, Atsumu; Jayakrishnan, Athipettah; Yoshida, Yasuhiko

    2007-09-01

    Poly(ethylene glycol) (PEG) was 'polymerized' onto poly(ethylene terephthalate) (PET) surface by radio frequency (RF) plasma polymerization of PEG (average molecular weight 200 Da) at a monomer vapour partial pressure of 10 Pa. Thin films strongly adherent onto PET could be produced by this method. The modified surface was characterized by infra red (IR) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), cross-cut test, contact angle measurements and static platelet adhesion studies. The modified surface, believed to be extensively cross-linked, however showed all the chemical characteristics of PEG. The surface was found to be highly hydrophilic as evidenced by an interfacial free energy of about 0.7 dynes/cm. AFM studies showed that the surface of the modified PET became smooth by the plasma polymerized deposition. Static platelet adhesion studies using platelet rich plasma (PRP) showed considerably reduced adhesion of platelets onto the modified surface by SEM. Plasma 'polymerization' of a polymer such as PEG onto substrates may be a novel and interesting strategy to prepare PEG-like surfaces on a variety of substrates since the technique allows the formation of thin, pin-hole free, strongly adherent films on a variety of substrates.

  1. Structure-property relationship in polyethylene reinforced by polyethylene-grafted multi-walled carbon nanotubes.

    Science.gov (United States)

    Causin, Valerio; Yang, Bing-Xing; Marega, Carla; Goh, Suat Hong; Marigo, Antonio

    2008-04-01

    Polyethylene-grafted multiwalled carbon nanotubes (PE-g-MWNT) were used to reinforce polyethylene (PE). The nanocomposites possessed not only improved stiffness and strength, but also increased ductility and toughness. The effects on the structure and morphology of composites due to pristine multiwalled carbon nanotubes (MWNT) and PE-g-MWNT were studied and compared using small angle X-ray scattering (SAXS), wide angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC). The SAXS long period, crystalline layer thickness and crystallinity of polymer lamellar stacks were found to decrease significantly in MWNT composites, while the decreases were much smaller in PE-g-MWNT composites. PE-g-MWNT allowed a more efficient and unhindered crystallization at a lamellar level, while MWNT disrupted the order of lamellar stacks, probably because of their tendency to aggregate. The SAXS crystallinity and the mechanical properties of the composites showed similar trends as a function of MWNT content. This suggested that the improvement of the interfacial strength between polymer and carbon nanotubes was a result of synergistic effects of better dispersion of the filler, better stress transfer, due to the grafting of polymer and MWNT, and the nucleation of a crystalline phase around MWNT. The latter effect was confirmed by measurements of kinetics of non-isothermal crystallization.

  2. The effect of polyethylene glycol on the characteristics of kenaf cellulose/low-density polyethylene biocomposites.

    Science.gov (United States)

    Tajeddin, Behjat; Rahman, Russly Abdul; Abdulah, Luqman Chuah

    2010-08-01

    Toward the development of biocomposites for packaging applications, the possibility of using kenaf cellulose (KC) was investigated in the production of low-density polyethylene (LDPE)/KC/polyethylene glycol (PEG) biocomposites. First, cellulose was extracted from the cell walls of kenaf-bast fibers. Then, different weights of LDPE, KC, and PEG were blended, and the effects of varying the concentrations of KC and PEG on the synthesis process were evaluated, and the resulting composites were characterized with respect to their mechanical, thermal, biodegradability and water-absorption properties. A scanning electron microscope (SEM) was also used to observe the surface morphology of the samples before and after biodegradation tests. The results showed that the mechanical properties of the biocomposites decreased slightly as the KC content was increased from 0 to 50wt% in the biocomposite formulation; however, there was a good homogeneity between samples with added PEG. The addition of KC improved the thermal resistance of these biocomposites; PEG also had positive role in the thermal behavior of the composites. Based on a soil-burial test, the biodegradability of the composites showed a clear trend of increase degradation with increasing KC content in the formulation. While water-absorption values for the composites were higher than that of pure LDPE polymer, the addition of PEG to the formulation reduced the water absorption of the composites.

  3. Effect of amine functionalized polyethylene on clay-silver dispersion for polyethylene nanocomposites

    Science.gov (United States)

    Sánchez-Valdes, S.; Ibarra-A, M. C.; Ramírez-V, E.; Ramos-V, L. F.; Martinez-C, J. G.; Romero-G, J.; Ledezma-P, A. S.; Rodriguez-F, O. S.

    2014-08-01

    The compatibilization provided by maleic anhydride (MA) and 2-[2-(dimethylamino)-ethoxy] ethanol (DMAE) functionalized polyethylene for forming polyethylene-based nanocomposites was studied and compared. MA was grafted into PE by melt mixing to obtain PEgMA (compatibilizer 1), thereafter, PEgMA was reacted with DMAE and an antioxidant also by melt mixing to obtain PAgDMAE (compatibilizer 2). These compatibilizers were reacted using ultrasound with a solution of AgNO3 0.04 M and Ethylene glycol. Ammonium hydroxide was added in a ratio of 2:1 molar with respect to silver nitrate. These silver coated compatibilizers were mixed with PE and nano-clay (Cloisite I28E), thus forming the different hybrid PE-clay-silver nanocomposites. FTIR confirmed the formation of these two compatibilizers. All the compatibilized nanocomposites had better filler (clay and silver) dispersion and exfoliation compared to the uncompatibilized PE nanocomposites. X-ray diffraction, mechanical and antimicrobial properties attained showed that the PEgDMAE produced the better dispersed PE, clay and silver nanocomposites. The obtained nanocomposites showed outstanding antimicrobial properties against bacteria, Escherichia coli and fungus, Aspergillus niger. It is concluded that the PEgDMAE offers an outstanding capability for preparing nanocomposites with highly exfoliated and dispersed filler into the PE matrix.

  4. ANALYSIS OF BRANCHING DISTRIBUTION IN POLYETHYLENES BY DIFFERENTIAL SCANNING CALORIMETRY

    Institute of Scientific and Technical Information of China (English)

    Robert Shanks; Fei Chen; Gandara Amarasinghe

    2003-01-01

    Short chain branching has been characterized using thermal fractionation, a stepwise isothermal crystallization technique, followed by a melting analysis scan using differential scanning calorimetry. Short chain branching distribution was also characterized by a continuous slow cooling crystallization, followed by a melting analysis scan. Four different polyethylenes were studied: Ziegler-Natta gas phase, Ziegler-Natta solution, metallocene, constrained-geometry single site catalyzed polyethylenes. The branching distribution was calculated from a calibration of branch content with melting temperature. The lamellar thickness was calculated based on the thermodynamic melting temperature of each polyethylene and the surface free energy of the crystal face. The branching distribution and lamellar thickness distribution were used to calculate weight average branch content, mean lamellar thickness, and a branch dispersity index. The results for the branch content were in good agreement with the known comonomer content of the polyethylenes. A limitation was that high branch content polyethylenes did not reach their potential crystallization at ambient temperatures. Cooling to sub-ambient was necessary to equilibrate the crystallization, but melting temperature versus branch content was not applicable after cooling to below ambient because the calibration data were not performed in this way.

  5. ANALYSIS OF BRANCHING DISTRIBUTION IN POLYETHYLENES BY DIFFERENTIAL SCANNING CALORIMETRY

    Institute of Scientific and Technical Information of China (English)

    RobertShanks; FeiChan; GandaraAmarasinghe; RobertShanks

    2003-01-01

    Short chain branching has been characterized using thermal fractionation,a stepwise isothermal crystallization technique,followed by a melting analysis scan using differential scanning calorimetry.Short chain branching distribution was also characterized by a continuous slow cooling crystallization,followed by a melting analysis scan.Four different polyethylenes were studied:Ziegler-Natta gas phase,Ziegler-Natta solution,metallocene,constrained-geometry single site catalyzed polyethylenes.The branching distribution was calculated from a calibration of branch content with melting temperature.The lamellar thickness was calculated based on the thermodynamic melting temperature of each polyethylene and the surface free energy of the crystal face.The branching distribution and lamellar thickness distribution were used to calculate weight average branch content,mean lamellar thickness,and a branch dispersity index.The results for the branch content were in good agreement with the known comonomer content of the polyethylenes.A limitation was that high branch content polyethylenes did not reach their potential crystallization at ambient temperatures.Cooling to sub-ambient was necessary to equilibrate the crystallization,but melting temperature versus branch content was not applicable after cooling to below ambient because the calibration data were not performed in this way.

  6. Versatile ferrofluids based on polyethylene glycol coated iron oxide nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Brullot, W., E-mail: ward.brullot@fys.kuleuven.be [Department of Chemistry, Katholieke Universiteit Leuven, Celestijnenlaan 200D, 3001 Heverlee, Leuven (Belgium); Reddy, N.K. [Department of Chemical Engineering, Katholieke Universiteit Leuven, Willem de Croylaan 46, 3001 Heverlee, Leuven (Belgium); Wouters, J.; Valev, V.K.; Goderis, B. [Department of Chemistry, Katholieke Universiteit Leuven, Celestijnenlaan 200D, 3001 Heverlee, Leuven (Belgium); Vermant, J. [Department of Chemical Engineering, Katholieke Universiteit Leuven, Willem de Croylaan 46, 3001 Heverlee, Leuven (Belgium); Verbiest, T. [Department of Chemistry, Katholieke Universiteit Leuven, Celestijnenlaan 200D, 3001 Heverlee, Leuven (Belgium)

    2012-06-15

    Versatile ferrofluids based on polyethylene glycol coated iron oxide nanoparticles were obtained by a facile protocol and thoroughly characterized. Superparamagnetic iron oxide nanoparticles synthesized using a modified forced hydrolysis method were functionalized with polyethylene glycol silane (PEG silane), precipitated and dried. These functionalized particles are dispersable in a range of solvents and concentrations depending on the desired properties. Examples of tunable properties are magnetic behavior, optical and magneto-optical response, thermal features and rheological behavior. As such, PEG silane functionalized particles represent a platform for the development of new materials that have broad applicability in e.g. biomedical, industrial or photonic environments. Magnetic, optical, magneto-optical, thermal and rheological properties of several ferrofluids based on PEG coated particles with different concentrations of particles dispersed in low molecular mass polyethylene glycol were investigated, establishing the applicability of such materials. - Highlights: Black-Right-Pointing-Pointer Ferrofluids based on polyethylene glycol coated iron oxide nanoparticles. Black-Right-Pointing-Pointer Magnetic, optical, magneto-optical, thermal and rheological characterization of ferrofluids. Black-Right-Pointing-Pointer Tunable properties of versatile polyethylene glycol stabilized ferrofluids.

  7. Polyethylene-waste tire dust composites via in situ polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Reyes A, Y. K.; Narro C, R. I.; Ramos A, M. E. [Universidad Autonoma de Coahuila, Facultad de Ciencias Quimicas, Blvd. Venustiano Carranza s/n, 25280 Saltillo, Coahuila (Mexico); Neira V, M. G.; Diaz E, J.; Enriquez M, F.; Valencia L, L. A.; Saade C, H.; Diaz de L, R., E-mail: ramon.diazdeleon@ciqa.edu.mx [Centro de Investigacion en Quimica Aplicada, Blvd. Enrique Reyna Hermosillo No. 40, Col. San Jose de los Cerritos, 25293 Saltillo, Coahuila (Mexico)

    2014-10-01

    Polyethylene/waste tire dust (WTD) composites were obtained by an in situ polymerization technique. The surface of the WTD was modified with deposition of polyethylene by using plasma polymerization. Ethylene polymerization was carried out using bis(cyclopentadienyl) titanium dichloride (Cp{sub 2}TiCl{sub 2}) as homogeneous metallocenes catalyst, while diethylaluminum chloride (DEAC), ethyl aluminum sesquichloride (EASC) and methyl alumino xane (Mao) were used as co-catalysts at two different [Al]/[Ti] molar ratio. The main characteristics of the obtained polyethylenes were determined by size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry and wide-angle X-ray diffraction. The results showed that by using EASC and Mao the highest catalytic activities were presented at a [Al]/[Ti] molar ratio of 9.17 and 18.33 respectively. Even though it was possible to obtain polyethylene using WTD (modified or unmodified) the catalytic activity was lower than in the case in which no WTD was added in ethylene polymerization. Scanning transmission electronic microscopy images evidenced that the original morphology of the polyethylenes was not modified by the presence of WTD. (Author)

  8. Pulmonary surfactant adsorption is increased by hyaluronan or polyethylene glycol.

    Science.gov (United States)

    Taeusch, H William; Dybbro, Eric; Lu, Karen W

    2008-04-01

    In acute lung injuries, inactivating agents may interfere with transfer (adsorption) of pulmonary surfactants to the interface between air and the aqueous layer that coats the interior of alveoli. Some ionic and nonionic polymers reduce surfactant inactivation in vitro and in vivo. In this study, we tested directly whether an ionic polymer, hyaluronan, or a nonionic polymer, polyethylene glycol, enhanced adsorption of a surfactant used clinically. We used three different methods of measuring adsorption in vitro: a modified pulsating bubble surfactometer; a King/Clements device; and a spreading trough. In addition we measured the effects of both polymers on surfactant turbidity, using this assay as a nonspecific index of aggregation. We found that both hyaluronan and polyethylene glycol significantly increased the rate and degree of surfactant material adsorbed to the surface in all three assays. Hyaluronan was effective in lower concentrations (20-fold) than polyethylene glycol and, unlike polyethylene glycol, hyaluronan did not increase apparent aggregation of surfactant. Surfactant adsorption in the presence of serum was also enhanced by both polymers regardless of whether hyaluronan or polyethylene glycol was included with serum in the subphase or added to the surfactant applied to the surface. Therefore, endogenous polymers in the alveolar subphase, or exogenous polymers added to surfactant used as therapy, may both be important for reducing inactivation of surfactant that occurs with various lung injuries.

  9. Radiation resistivity of polyacenaphthylene-grafted polyethylene. [Gamma irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Hayakawa, K.; Kawase, K.; Yamakita, H. (Government Industrial Research Inst., Nagoya (Japan))

    1983-01-01

    Thin poly(ethylene-g-acenaphthylene) films prepared by the vapor-phase grafting method were subjected to the ..gamma..-irradiation in air, and various changes in tensile and structural properties of the film were investigated by comparing with those of the untreated or crosslinked polyethylene film. Polyethylene got to lose its inherent necking property by oxidative degradation and to be brittle-fractured by the irradiation dose less than 100 Mrad in air. The polyacenaphthylene-grafted polyethylenes, however, kept their ductility up to 200 Mrad or more, and the rate of increase in elastic modulus as well as yield strength with the increasing irradiation dose was considerably lower than that of untreated or crosslinked polyethylene. The effect of the grafting extent, and that of the irradiation dose-rate on the fracture energy were also examined. The weight increase of polyethylene due to the oxygen consumption and the resulting formation of carbonyl group which proceeded proportionally with the irradiation dose were remarkably suppressed by the grafting, whereas the double bond formation seemed to be unaffected by it. The grafted film held the original content of gel fraction unchanged during the irradiation in air, but the average molecular weight of the sol fraction decreased gradually.

  10. Modeling uptake of hydrophobic organic contaminants into polyethylene passive samplers.

    Science.gov (United States)

    Thompson, Jay M; Hsieh, Ching-Hong; Luthy, Richard G

    2015-02-17

    Single-phase passive samplers are gaining acceptance as a method to measure hydrophobic organic contaminant (HOC) concentration in water. Although the relationship between the HOC concentration in water and passive sampler is linear at equilibrium, mass transfer models are needed for nonequilibrium conditions. We report measurements of organochlorine pesticide diffusion and partition coefficients with respect to polyethylene (PE), and present a Fickian approach to modeling HOC uptake by PE in aqueous systems. The model is an analytic solution to Fick's second law applied through an aqueous diffusive boundary layer and a polyethylene layer. Comparisons of the model with existing methods indicate agreement at appropriate boundary conditions. Laboratory release experiments on the organochlorine pesticides DDT, DDE, DDD, and chlordane in well-mixed slurries support the model's applicability to aqueous systems. In general, the advantage of the model is its application in the cases of well-agitated systems, low values of polyethylene-water partioning coefficients, thick polyethylene relative to the boundary layer thickness, and/or short exposure times. Another significant advantage is the ability to estimate, or at least bound, the needed exposure time to reach a desired CPE without empirical model inputs. A further finding of this work is that polyethylene diffusivity does not vary by transport direction through the sampler thickness.

  11. Residual voltage of. gamma. -irradiated polyethylene containing antioxidant

    Energy Technology Data Exchange (ETDEWEB)

    Yamanaka, Sanshiro; Fukuda, Tadashi; Sawa, Goro; Ieda, Masayuki

    1987-03-01

    Various cables used for nuclear power plants, especially those used for safety protection system must keep their functions even if a LOCA occurred at the end of 40 year plant life. When cross-linked polyethylene is exposed to radiation in the atmosphere, the tensile strength and elongation begin to decrease by the irradiation above 1.5 x 10/sup 8/ rad. In order to improve the reliability of cross-linked polyethylene, the method of increasing the radiation resistance by mixing additives has been examined. Moreover, it is necessary to diagnose the deterioration of cables by nondestructive method, but such field test is difficult now. For the purpose of detecting the radiation deterioration of polyethylene power cables nondestructively using residual voltage, the authors examined the effect of gamma ray irradiation exerted on the residual voltage of low density polyethylene to which phenol compound (Irganox 1010) or amine compound (Antage F) was added, subsequently to the study on the polyethylene without additives. The specimens, experimental method and results are reported. In the specimens without irradiation, the addition of Antage F increased the residual voltage and current. The residual voltage of the specimens with a large amount of addition showed the same value after irradiation as that in the case without irradiation. (Kako, I.).

  12. Injectable silk-polyethylene glycol hydrogels.

    Science.gov (United States)

    Wang, Xiaoqin; Partlow, Benjamin; Liu, Jian; Zheng, Zhaozhu; Su, Bo; Wang, Yansong; Kaplan, David L

    2015-01-01

    Silk hydrogels for tissue repair are usually pre-formed via chemical or physical treatments from silk solutions. For many medical applications, it is desirable to utilize injectable silk hydrogels at high concentrations (>8%) to avoid surgical implantation and to achieve slow in vivo degradation of the gel. In the present study, injectable silk solutions that formed hydrogels in situ were generated by mixing silk with low-molecular-weight polyethylene glycol (PEG), especially PEG300 and 400 (molecular weight 300 and 400g mol(-1)). Gelation time was dependent on the concentration and molecular weight of PEG. When the concentration of PEG in the gel reached 40-45%, gelation time was less than 30min, as revealed by measurements of optical density and rheological studies, with kinetics of PEG400 faster than PEG300. Gelation was accompanied by structural changes in silk, leading to the conversion from random coil in solution to crystalline β-sheets in the gels, based on circular dichroism, attenuated total reflection Fourier transform infrared spectroscopy and X-ray diffraction. The modulus (127.5kPa) and yield strength (11.5kPa) determined were comparable to those of sonication-induced hydrogels at the same concentrations of silk. The time-dependent injectability of 15% PEG-silk hydrogel through 27G needles showed a gradual increase of compression forces from ∼10 to 50N within 60min. The growth of human mesenchymal stem cells on the PEG-silk hydrogels was hindered, likely due to the presence of PEG, which grew after a 5 day delay, presumably while the PEG solubilized away from the gel. When 5% PEG-silk hydrogel was subcutaneously injected in rats, significant degradation and tissue in-growth took place after 20 days, as revealed by ultrasound imaging and histological analysis. No significant inflammation around the gel was observed. The features of injectability, slow degradation and low initial cell attachment suggests that these PEG-silk hydrogels are of interest

  13. The radiation improvement of polyethylene prostheses. A preliminary study.

    Science.gov (United States)

    Grobbelaar, C J; du Plessis, T A; Marais, F

    1978-08-01

    The radiation crosslinking of high-density polyethylene prostheses was investigated over a wide range of doses in the presence and absence of gaseous crosslinking agents. It was found that in the bulk polymer the crosslinking pattern is completely different from the homogeneous crosslinking that occurs in polymer films. The presence of crosslinking agents causes highly crosslinked polymer to be formed on the surface while the bulk of the polymer is largely unaffected--which is explained in terms of diffusion phenomena. This surface crosslinking has a profound effect on the mechanical properties of the prostheses and restricts cold flow and deformation of the polymer without sacrificing the excellent abrasion-resistance properties of the polyethylene when subjected to high pressures. Based on this research a number of high-density polyethylene knee prostheses have been radiation-crosslinked and the results in vitro appear to be very promising.

  14. Thermal Effect of Ceramic Nanofiller Aluminium Nitride on Polyethylene Properties

    Directory of Open Access Journals (Sweden)

    Omer Bin Sohail

    2012-01-01

    Full Text Available Ethylene polymerization was done to form polyethylene nano-composite with nanoaluminum nitride using zirconocene catalysts. Results show that the catalytic activity is maximum at a filler loading of 15 mg nanoaluminum nitride. Differential scanning calorimeter (DSC and X-ray diffraction (XRD results show that percentage crystallinity was also marginally higher at this amount of filler. Thermal behavior of polyethylene nanocomposites (0, 15, 30, and 45 mg was studied by DSC and thermal gravimetric analyzer (TGA. Morphology of the component with 15 mg aluminium nitride is more fibrous as compared to 0 mg aluminium nitride and higher filler loading as shown by SEM images. In order to understand combustibility behavior, tests were performed on microcalorimeter. Its results showed decrease in combustibility in polyethylene nanocomposites as the filler loading increases.

  15. Conventional Versus Cross-Linked Polyethylene for Total Hip Arthroplasty.

    Science.gov (United States)

    Surace, Michele F; Monestier, Luca; Vulcano, Ettore; Harwin, Steven F; Cherubino, Paolo

    2015-09-01

    The clinical and radiographic outcomes of 88 patients who underwent primary total hip arthroplasty with either conventional polyethylene or cross-linked polyethylene (XLPE) from the same manufacturer were compared. There were no significant differences between the 2 subpopulations regarding average age, gender, side affected, or prosthetic stem and cup size. The average follow-up was 104 months (range, 55 to 131 months). To the authors' knowledge, this is the longest follow-up for this particular insert. Clinical and radiographic evaluations were performed at 1, 3, 6, and 12 months and then annually. Results showed that XLPE has a significantly greater wear reduction than that of standard polyethylene in primary total hip arthroplasty. At the longest available follow-up for these specific inserts, XLPE proved to be effective in reducing wear.

  16. Static and Dynamic Properties of Semi-Crystalline Polyethylene

    Directory of Open Access Journals (Sweden)

    Ming-ming Xu

    2016-03-01

    Full Text Available Properties of extruded polymers are strongly affected by molecular structure. For two different semi-crystalline polymers, low-density polyethylene (LDPE and ultra-high molecular weight polyethylene (UHMWPE, this investigation measures the elastic modulus, plastic flow stress and strain-rate dependence of yield stress. Also, it examines the effect of molecular structure on post-necking tensile fracture. The static and dynamic material tests reveal that extruded UHMWPE has a somewhat larger yield stress and much larger strain to failure than LDPE. For both types of polyethylene, the strain at tensile failure decreases with increasing strain-rate. For strain-rates 0.001–3400 s−1, the yield stress variation is accurately represented by the Cowper–Symonds equation. These results indicate that, at high strain rates, UHMWPE is more energy absorbent than LDPE as a result of its long chain molecular structure with few branches.

  17. Migration of polyethylene fixation screw after total knee arthroplasty.

    Science.gov (United States)

    Cho, Woo-Shin; Youm, Yoon-Seok

    2009-08-01

    Duracon (Howmedica, Rutherford, NJ) posterior stabilized total knee system has a snap fit locking mechanism of a tibial polyethylene, including an additional locking screw for further fixation of polyethylene. We report 13 cases of locking screw migration from tibial component after Duracon posterior stabilized primary total knee arthroplasty. Among 13 knees, screw migration in 10 asymptomatic cases was incidentally detected during regular follow-up, and they were just observed in the outpatient clinic. Only 3 knees had moderate pain, swelling, and instability, and revision was done on 2 of 3 knees.

  18. Curing characteristics of chlorosulphonated polyethylene and natural rubber blends

    OpenAIRE

    M. MARINOVIC-CINCOVIC; J. BUDINSKI SIMENDIC; Markovic, G.; Radovanovic, B.

    2005-01-01

    The dependence of the Mooney scorch time and cure index on the blend ratio of chlorosulphonated polyethylene/natural rubber (CSM/SMR 20 CV) and chlorosulphonated polyethylene/chlorinated natural rubber (CSM/Pergut S 40) blends were determined in the temperature range from 120 oC to 160 oC using a Monsanto Mooney viscometer. Semi-efficient vulcanization systems were used for the study. The morphology of the fracture surface of the crosslinked systems was determined by Scanning Electron Microsc...

  19. Radicals contributing to preirradiation graft polymerization onto porous polyethylene

    Science.gov (United States)

    Uezu, Kazuya; Saito, Kyoichi; Furusaki, Shintaro; Sugo, Takanobu; Ishigaki, Isao

    Porous polyethylene hollow fiber was irradiated by an electron beam at 160 kGy and 8 kGy/min. The concentrations of the radicals such as alkyl, allyl and peroxy were determined by analyzing an integral form of ESR spectra. The comparison of the decay of the radicals with and without contact with air demonstrated that the key radical contributing to the preirradiation graft polymerization is the alkyl radical. The decay of the alkyl radical was simulated by the diffusion-controlled model in the spherical crystallites of polyethylene.

  20. Direct Synthesis of Telechelic Polyethylene by Selective Insertion Polymerization

    KAUST Repository

    Jian, Zhongbao

    2016-10-14

    A single-step route to telechelic polyethylene (PE) is enabled by selective insertion polymerization. PdII-catalyzed copolymerization of ethylene and 2-vinylfuran (VF) generates α,ω-di-furan telechelic polyethylene. Orthogonally reactive exclusively in-chain anhydride groups are formed by terpolymerization with carbic anhydride. Combined experimental and theoretical DFT studies reveal the key for this direct approach to telechelics to be a match of the comonomers’ different electronics and bulk. Identified essential features of the comonomer are that it is an electron-rich olefin that forms an insertion product stabilized by an additional interaction, namely a π–η3 interaction for the case of VF.

  1. 78 FR 28192 - Polyethylene Retail Carrier Bags From Thailand: Preliminary Results of Antidumping Duty...

    Science.gov (United States)

    2013-05-14

    ... International Trade Administration Polyethylene Retail Carrier Bags From Thailand: Preliminary Results of Antidumping Duty Administrative Review; 2011-2012 AGENCY: Import Administration, International Trade... administrative review of the antidumping duty order on polyethylene retail carrier bags (PRCBs) from...

  2. 78 FR 78748 - 2,5-Furandione, polymer With ethenylbenzene, Reaction Products With polyethylene-polypropylene...

    Science.gov (United States)

    2013-12-27

    ... AGENCY 40 CFR Part 180 2,5-Furandione, polymer With ethenylbenzene, Reaction Products With polyethylene... for residues of 2,5-furandione, polymer with ethenylbenzene, reaction products with polyethylene... polyethylene-polypropylene glycol 2-aminopropyl Me ether on food or feed commodities. DATES: This regulation is...

  3. Determination of Crystallinity and Crystal Structure of Hylamer™ Polyethylene after in vivo Wear

    OpenAIRE

    Visentin, M; Stea, S.; De Clerico, M.; Reggiani, M.; Fagnano, C.; Squarzoni, S.; De Toni, A

    2006-01-01

    Abstract Hylamer? polyethylene is a crystalline form of polyethylene of 70% crystallinity whereas conventional polyethylene (PE) has 50% crystallinity. Crystallinity is the percentage by weight of the crystalline phase present in the whole polymer, which comprises both amorphous and crystalline phases. Clinical experience has shown that Hylamer? components used in joint prostheses, if sterilized ...

  4. 21 CFR 573.800 - Polyethylene glycol (400) mono- and dioleate.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Polyethylene glycol (400) mono- and dioleate. 573... DRINKING WATER OF ANIMALS Food Additive Listing § 573.800 Polyethylene glycol (400) mono- and dioleate. (a) The food additive polyethylene glycol (400) mono- and dioleate meets the following...

  5. 76 FR 69659 - Methacrylic Acid-Methyl Methacrylate-Polyethylene Glycol Monomethyl Ether Methacrylate Graft...

    Science.gov (United States)

    2011-11-09

    ... AGENCY 40 CFR Part 180 Methacrylic Acid-Methyl Methacrylate-Polyethylene Glycol Monomethyl Ether... residues of methacrylic acid-methyl methacrylate- polyethylene glycol monomethyl ether methacrylate graft... permissible level for residues of methacrylic acid-methyl methacrylate-polyethylene glycol monomethyl...

  6. 21 CFR 178.3750 - Polyethylene glycol (mean molecular weight 200-9,500).

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Polyethylene glycol (mean molecular weight 200-9..., PRODUCTION AIDS, AND SANITIZERS Certain Adjuvants and Production Aids § 178.3750 Polyethylene glycol (mean molecular weight 200-9,500). Polyethylene glycol identified in this section may be safely used as...

  7. 21 CFR 172.820 - Polyethylene glycol (mean molecular weight 200-9,500).

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Polyethylene glycol (mean molecular weight 200-9... ADDITION TO FOOD FOR HUMAN CONSUMPTION Multipurpose Additives § 172.820 Polyethylene glycol (mean molecular weight 200-9,500). Polyethylene glycol identified in this section may be safely used in food...

  8. 40 CFR 721.3900 - Alkyl polyethylene glycol phosphate, potassium salt.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl polyethylene glycol phosphate... Specific Chemical Substances § 721.3900 Alkyl polyethylene glycol phosphate, potassium salt. (a) Chemical... as alkyl polyethylene glycol phosphate, potassium salt (P-90-481), is subject to reporting under...

  9. Determination of Crystallinity and Crystal Structure of Hylamer™ Polyethylene after in vivo Wear

    OpenAIRE

    Visentin, M; Stea, S.; Clerico, M; Reggiani, M.; Fagnano, C.; Squarzoni, S.; Toni, A.

    2006-01-01

    Abstract Hylamer? polyethylene is a crystalline form of polyethylene of 70% crystallinity whereas conventional polyethylene (PE) has 50% crystallinity. Crystallinity is the percentage by weight of the crystalline phase present in the whole polymer, which comprises both amorphous and crystalline phases. Clinical experience has shown that Hylamer? components used in joint prostheses, if sterilized ...

  10. 76 FR 11203 - Polyethylene Retail Carrier Bags From the People's Republic of China: Rescission of Antidumping...

    Science.gov (United States)

    2011-03-01

    ... International Trade Administration Polyethylene Retail Carrier Bags From the People's Republic of China... polyethylene retail carrier bags (PRCBs) from the People's Republic of China (PRC) with respect to Dongguan... Order: Polyethylene Retail Carrier Bags From the People's Republic of China, 69 FR 48201 (August 9,...

  11. 78 FR 88 - Polyethylene Retail Carrier Bags From the People's Republic of China: Rescission of Antidumping...

    Science.gov (United States)

    2013-01-02

    ... International Trade Administration Polyethylene Retail Carrier Bags From the People's Republic of China... rescinding its administrative review of the antidumping duty order on polyethylene retail carrier bags (PRCBs..., through July 31, 2012.\\1\\ On August 31, 2012, the petitioners, the Polyethylene Retail Carrier...

  12. 77 FR 2959 - Polyethylene Retail Carrier Bags From the People's Republic of China: Rescission of Antidumping...

    Science.gov (United States)

    2012-01-20

    ... International Trade Administration Polyethylene Retail Carrier Bags From the People's Republic of China... polyethylene retail carrier bags (PRCBs) from the People's Republic of China (PRC) with respect to Dongguan... PRCBs from the PRC. See Antidumping Duty Order: Polyethylene Retail Carrier Bags From the...

  13. 75 FR 53711 - Polyethylene Terephthalate (PET) Film From Korea

    Science.gov (United States)

    2010-09-01

    ... Review)] Polyethylene Terephthalate (PET) Film From Korea AGENCY: United States International Trade...-Like Product constitutes a major proportion of the total domestic production of the product. In its... workers are employed/which are members of your association. (a) Production (quantity) and, if known, an...

  14. Highly Branched Polyethylenes as Lubricant Viscosity and Friction Modifiers

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, Joshua W.; Zhou, Yan; Qu, Jun; Bays, John T.; Cosimbescu, Lelia

    2016-10-08

    A series of highly branched polyethylenes (BPE) were prepared and used in a Group I base oil as potential viscosity and friction modifiers. The lubricating performance of these BPEs supports the expected dual functionality. Changes in polarity, topology, and molecular weight of the BPEs showed significant effects on the lubricants’ performance, which provide scientific insights for polymer design in future lubricant development.

  15. Weakening of a Polyethylene Chain by Methyl Side Groups

    NARCIS (Netherlands)

    Hageman, J.C.L.; Wijs, G.A. de; Groot, R.A. de; Meier, Robert J.

    2003-01-01

    The effect of methyl side groups on the strength of a single polyethylene chain is calculated with Density Functional Theory. Using transition state theory, the scission rate is calculated as function of stress for bonds next to a methyl side group. The increase in the scission rate due to the prese

  16. Radioimmunoprecipitation polyethylene glycol assay for circulating Entamoeba histolytica antigens

    Energy Technology Data Exchange (ETDEWEB)

    Pillai, S.; Mohimen, A.; Mehra, S. (Calcutta Medical Research Inst., Calcutta (India). Kothari Centre of Gastroenterology)

    1982-12-17

    An assay capable of detecting circulating Entamoeba histolytica antigens in amoebiasis is described. This assay utilised a radiolabelled affinity purified rabbit anti-E. histolytica antibody that had been depleted of antibodies that cross-react with human serum proteins, and a polyethylene glycol precipitation step.

  17. Laser-generated plasma by carbon nanoparticles embedded into polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Torrisi, L., E-mail: lorenzo.torrisi@unime.it [Dipartimento di Scienze Fisiche MIFT, Università di Messina, V.le F.S. D’Alcontres 31, 98166 S. Agata, Messina (Italy); Ceccio, G. [Dipartimento di Scienze Fisiche MIFT, Università di Messina, V.le F.S. D’Alcontres 31, 98166 S. Agata, Messina (Italy); Cutroneo, M. [Nuclear Physics Institute, AS CR, 25068 Rez (Czech Republic)

    2016-05-15

    Highlights: • Advanced targets are prepared using UHMWPE containing CNT at different concentrations. • The composite has different optical, mechanical, electrical and compositional properties with respect to polyethylene. • Higher ion accelerations with respect to the pure polyethylene are obtained from laser generated plasmas at 10{sup 10} W/cm{sup 2} intensity. • High carbon ion yields with respect to the pure polyethylene are obtained from laser generated plasmas at 10{sup 10} W/cm{sup 2} intensity. • Advanced targets were prepared to be irradiated in TNSA regime using laser at 10{sup 18} W/cm{sup 2} intensity. - Abstract: Carbon nanoparticles have been embedded into polyethylene at different concentrations by using chemical–physical processes. The synthesized material was characterized in terms of physical modifications concerning the mechanical, compositional and optical properties. Obtained flat targets have been irradiated by Nd:YAG laser at intensities of the order of 10{sup 10} W/cm{sup 2} in order to generate non-equilibrium plasma in vacuum. The laser–matter interaction produces charge separation effects with consequent acceleration of protons and carbon ions. Plasma was characterized using time-of-flight measurements of the accelerated ions. Applications of the produced targets in order to generate carbon ion beams from laser-generated plasma are presented and discussed.

  18. Weakening of a Polyethylene Chain by Methyl Side Groups

    NARCIS (Netherlands)

    Hageman, J.C.L.; Wijs, G.A. de; Groot, R.A. de; Meier, Robert J.

    2003-01-01

    The effect of methyl side groups on the strength of a single polyethylene chain is calculated with Density Functional Theory. Using transition state theory, the scission rate is calculated as function of stress for bonds next to a methyl side group. The increase in the scission rate due to the prese

  19. Effects of Biomass in Polyethylene or Polylactic Acid Composites

    Science.gov (United States)

    Previous studies have shown that compounding Polyethylene (PE) or Polylactic acid (PLA) with a dairy-based bioplastic resulted in composites with good mechanical properties. In this study, mass ratios of a dairy-protein-based material (DBP) ranging from 0, 5, 10 and 20 wt% replaced equivalent masse...

  20. 21 CFR 177.1600 - Polyethylene resins, carboxyl modified.

    Science.gov (United States)

    2010-04-01

    ... (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as... resins used in food-packaging adhesives complying with § 175.105 of this chapter. ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Polyethylene resins, carboxyl modified....

  1. Enhanced Ionic Conductivity of Poly(Ethylene Imine) Phosphate

    DEFF Research Database (Denmark)

    Senadeera, G.K.R.; Careem, M.A.; Skaarup, Steen;

    1996-01-01

    The conductivity of mixtures of phosphoric acid with poly(ethylene imine) has been studied, and it was found that the conductivity of such mixtures with high acid content can be enhanced by the addition of highly dispersed silica (fumed silica). At the same time, silica addition increases the sti...

  2. Simulation of polyethylene glycol and calcium-mediated membrane fusion

    NARCIS (Netherlands)

    Pannuzzo, Martina; De Jong, Djurre H.; Raudino, Antonio; Marrink, Siewert J.

    2014-01-01

    We report on the mechanism of membrane fusion mediated by polyethylene glycol (PEG) and Ca2+ by means of a coarse-grained molecular dynamics simulation approach. Our data provide a detailed view on the role of cations and polymer in modulating the interaction between negatively charged apposed membr

  3. Influence of polystyrene and polyethylene packaging materials on food quality.

    NARCIS (Netherlands)

    Linssen, J.P.H.

    1992-01-01

    Polystyrene (PS) and polyethylene (PE) used for packaging of food were studied on their effect on product quality. Different types of PS were tested: General purpose polystyrene (GPPS), high impact polystyrene (HIPS, which contains a dispersed rubber phase) and several blends of these types. PS

  4. Biocompatibility of modified ultra-high-molecular-weight polyethylene

    Science.gov (United States)

    Novotná, Z.; Lacmanová, V.; Rimpelová, S.; Juřik, P.; Polívková, M.; Å vorčik, V.

    2016-09-01

    Ultra-high-molecular-weight polyethylene (UHMWPE, PE) is a synthetic polymer used for biomedical applications because of its high impact resistance, ductility and stability in contact with physiological fluids. Therefore this material is being used in human orthopedic implants such as total joint replacements. Surface modification of this material relates to changes of its surface hydrophilicity, energy, microstructure, roughness, and morphology, all influencing its biological response. In our recent work, PE was treated by an Ar+ plasma discharge and then grafted with biologically active polyethylene glycol in order to enhance adhesion and proliferation of mouse fibroblast (L929). The surface properties of pristine PE and its grafted counterparts were studied by goniometry (surface wettability). Furthermore, Atomic Force Microscopy was used to determine the surface morphology and roughness. The biological response of the L929 cell lines seeded on untreated and plasma treated PE matrices was quantified in terms of the cell adhesion, density, and metabolic activity. Plasma treatment leads to the ablation of the polymer surface layers. Plasma treatment and subsequent poly(ethylene glycol) grafting lead to dramatic changes in the polymer surface morphology and roughness. Biological tests, performed in vitro, show increased adhesion and proliferation of cells on modified polymers. Grafting with poly(ethylene glycol) increases cell proliferation compared to plasma treatment.

  5. Studies on the biodegradation of natural and synthetic polyethylene ...

    African Journals Online (AJOL)

    Michael Horsfall

    ABSTRACT: The current article makes a comparative analysis between the biodegradation of natural and ... after incubation in the culture medium were compared and the percentage of degradation was calculated. ... The active enzymes produced by the bacteria caused .... mass adhering to the polyethylene surface was.

  6. Surface charges in blending short fibres with polyethylene powder

    NARCIS (Netherlands)

    Hofste, JM; Kersten, MJE; van Turnhout, J; Pennings, AJ

    1998-01-01

    Short fibres and ultra-high molecular weight polyethylene (UHMWPE) powder were mixed by swirling in a glass jar with compressed nitrogen. It was found that a kind of attraction between the fibres and UHMWPE particles is crucial for making a composite with a proper fibre distribution. If aramid and U

  7. Tensile behaviour of polyethylene and poly(p-xylylene) fibres

    NARCIS (Netherlands)

    van der Werff, Harm

    1991-01-01

    This thesis deals with the tensile behaviour of fibres prepared from high molecular weight polymers.The tensile strength of a polymeric fibre is in general much lower than the corresponding theoretical value. In case of ultra-high molecular weight polyethylene (UHMWPE), fibres can be prepared by gel

  8. Tough, semiconducting polyethylene-poly(3-hexylthiophene) diblock copolymers

    DEFF Research Database (Denmark)

    Müller, C.; Goffri, S.; Breiby, Dag Werner

    2007-01-01

    Semiconducting diblock copolymers of polyethylene (PE) and regioregular poly(3-hexylthiophene) (P3HT) are demonstrated to exhibit a rich phase behaviour, judicious use of which permitted us to fabricate field-effect transistors that show saturated charge carrier mobilities, mu(FET), as high as 2 ...

  9. Occurrence and recalcitrance of polyethylene bag waste in Nigerian ...

    African Journals Online (AJOL)

    GREGORY

    2010-09-13

    Sep 13, 2010 ... Department of Botany and Microbiology University of Lagos, Akoka, Lagos, Nigeria. Accepted 30 July ... packaging and containers for drugs. The film is used ... polyethylene waste materials has been adopted as a management ..... and the microbial quality of the preserved and unpreserved juice. Trop. Sci.

  10. The Use of Polyethylene in Hot Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Mohammad T. Awwad

    2007-01-01

    Full Text Available The increase in road traffic during the last two decades in combination with an insufficient degree of maintenance due to shortage in funds has caused an accelerated and continuous deterioration of the road network in Jordan. To alleviate this process, several types of measures may be effective, e.g., securing funds for maintenance, improved roadway design, use of better quality of materials and the use of more effective construction methods. The use of polymer in asphalt mixture as a modifier started in the 80s of the last century and has been tested in a number of countries around the World. In this research, polyethylene as one sort of polymers is used to investigate the potential prospects to enhance asphalt mixture properties. The objectives also include determining the best type of polyethylene to be used and its proportion. Two types of polyethylene were added to coat the aggregate [High Density Polyethylene (HDPE and Low Density Polyethylene (LDPE]. The polymers were introduced to the mixture in two states (Grinded and not Grinded. Marshall mix design was used, first to determine the optimum bitumen binder content and then further to test the modified mixture properties. In total, 105 samples were prepared (21 samples were used to determine the binder content and the remaining samples were used to investigate the effect of modifying the asphalt mixtures. The optimum asphalt content was 5.4%. Seven proportions of polyethylene of each type and state by weight of the optimum binder content were selected to be tested (6, 8, 10, 12, 14, 16 and 18%. The tests include the determination of bulk density, stability and flow. Marshall mix design requires the determination of the percentages of air voids and air voids of mineral aggregate. The results indicated that grinded HDPE polyethylene modifier provides better engineering properties. The recommended proportion of the modifier is 12% by the weight of bitumen content. It is found to increase the

  11. Laser transmission welding of poly(ethylene terephthalate) and biodegradable poly(ethylene terephthalate) - Based blends

    Science.gov (United States)

    Gisario, Annamaria; Veniali, Francesco; Barletta, Massimiliano; Tagliaferri, Vincenzo; Vesco, Silvia

    2017-03-01

    Joining of Poly(Ethylene Terephthalate) PET and its biodegradable derivatives is of high relevance to ensure good productive rate, low cost and operational safety for fabrication of medical and electronic devices, sport equipments as well as for manufacturing of food and drug packaging solutions. In the present investigation, granules of PET and PETs modified by organic additives, which promote biodegradation of the polymeric chains, were prepared by extrusion compounding. The achieved granules were subsequently re-extruded to shape thin (330 μm) flat sheets. Substrates cut from these sheets were joined by Laser Transmission Welding (LTW) with a continuous wave High Power Diode Laser (cw-HPDL). First, based on a qualitative evaluation of the welded joints, the most suitable operational windows for PETs laser joining were identified. Second, characterization of the mechanical properties of the welded joints was performed by tensile tests. Accordingly, Young's modulus of PET and biodegradable PET blends was studied by Takayanagi's model and, based on the experimental results, a novel predicting analytical model derived from the mixture rule was developed. Lastly, material degradation of the polymeric joints was evaluated by FT-IR analysis, thus allowing to identify the main routes to thermal degradation of PET and, especially, of biodegradable PET blends during laser processing.

  12. Nanoscale morphologies of polystyrene and polyethylene ionomers

    Science.gov (United States)

    Chan, Christopher D.

    on the size, shape, distribution, and number density of the ionic aggregates. We generalize our simulation method to projection of overlapping spheres. A procedure is developed to create and analyze large numbers of simulated projections through computer algorithms. To analyze the data set, it is plotted on axes chosen to reduce the number of variables that influenced the number of features counted in the simulated image (N2D) as a function of simulation thickness (t). The dependant axis is N2D normalized by the area of the simulation in units of 4 times the square of the sphere radius. The independent axis is simply the thickness in units of the sphere radius. With these axes, the important variable is the volume fraction of spheres (φ R). In addition, there is a critical thickness, t c, where if t t c, the normalized N2D is independent of thickness at a value of beta. By knowing the thickness of the sample, the normalized N2D, the volume fraction can be estimated and thus the number of spheres in the volume can be calculated. Finally, we study the morphology of linear P(E-AA) copolymers with precisely-sequenced and irregularly sequenced acid groups to establish the effect that the acid group sequence has on the crystal structure. The linear irregularly-sequenced P(E-AA) copolymers behave similarly to low density poly(ethylene-acrylic acid) forming an orthorhombic polyethylene crystal structure and excluding the acid groups to the amorphous regions. The linear precisely-sequenced P(E-AA) copolymers exhibit an unique structure with the acids forming large planar layers that are incorporated into the crystal structure. The precisely-sequence linear P(E-AA) ionomers exhibit both the new acid layer structures and the traditional ionic aggregates. With increasing neutralization, the crystallinity of the P(E-AA) and the new acid layer structure decrease as the acid groups necessary are co-opted to form the ionic aggregates in the amorphous regions.

  13. 75 FR 75454 - Polyethylene Retail Carrier Bags From Thailand: Extension of Time Limit for the Final Results of...

    Science.gov (United States)

    2010-12-03

    ... International Trade Administration Polyethylene Retail Carrier Bags From Thailand: Extension of Time Limit for... polyethylene retail carrier bags from Thailand. See Polyethylene Retail Carrier Bags From Thailand: Preliminary... antidumping duty order on polyethylene retail carrier bags from Thailand within the 120- day time limit due...

  14. Laser patterned carbon–polyethylene mesh electrodes for wound diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Phair, Jolene; Joshi, Mayank; Benson, John; McDonald, Damian; Davis, James, E-mail: james.davis@ulster.ac.uk

    2014-02-14

    Carbon loaded polyethylene films were selected as the base substrate for a mechanically flexible and conductive sensing material for use wound monitoring technologies. The films were processed using laser ablation of the surface to increase the effective surface area of the electrode and then subject to an oxidative electrochemical etch to improve the electron transfer kinetics. The surface morphology of the resulting films was analysed and the electrode performance in relation to monitoring uric acid, a key wound biomarker, was optimized. A prototype smart bandage was designed, based on interfacing the mesh to a portable potentiostat, and the response to urate and potential interferences assessed. - Highlights: • Innovative use of a carbon–polyethylene mesh for wound sensing applications. • Electroanalytical characterisation of a mechanically flexible conductive film. • Design and preliminary characterisation of an integrated smart bandage.

  15. High-density polyethylene dosimetry by transvinylene FTIR analysis

    DEFF Research Database (Denmark)

    McLaughlin, W.L.; Silverman, J.; Al-Sheikhly, M.

    1999-01-01

    . The transvinylene response in air to gamma radiation is linear with dose and has relatively low yield compared with the response to electrons, whereas the response in deaerated polyethylene samples is also linear, but is more sensitive, and has negligible dose-rate dependence in its response to gamma rays...... and electrons. The useful dose range of 0.053 cm thick high-density polyethylene film (rho = 0.961 g cm(-3); melt index = 0.8 dg min(-1)), for irradiations by (60)Co gamma radiation and 2.0 and 0.4 MeV electron beams in deaerated atmosphere (Na gas), is about 50-10(3) kGy for FTIR transvinylene...

  16. Influence of corona charging in cellular polyethylene film

    Energy Technology Data Exchange (ETDEWEB)

    Ortega Brana, Gustavo; Magraner, Francisco; Quijano, Alfredo [Instituto Tecnologico de la Energia (ITE), Av. Juan de la Cierva 24, Parque Tecnologico de Valencia, 46980 Paterna-Valencia (Spain); Llovera Segovia, Pedro, E-mail: gustavo.ortega@ite.es [Instituto de TecnologIa Electrica - Universitat Politecnica de Valencia, Camino de Vera s/n 46022-Valencia (Spain)

    2011-06-23

    Cellular polymers have recently attracted attention for their property of exhibiting a piezoelectric constant when they are electrically charged. The electrostatic charge generated in the voids by the internal discharges creates and internal macrodipole which is responsible for the piezoelectric effect. Charging by corona discharge is the most used method for cellular polymers. Many works has been published on polypropylene and polyethylene films mainly focused on the required expansion process or on the results obtained for raw cellular materials electrically activated. Our work is based on commercial polyethylene cellular films which have been physically characterized and electrically activated. The effect of thermal treatment, physical uniaxial or biaxial stretching and corona charging was investigated. The new method of corona charging improved the piezoelectric constant under other activation conditions.

  17. Polyethylene encapsulation full-scale technology demonstration. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kalb, P.D.; Lageraaen, P.R.

    1994-10-01

    A full-scale integrated technology demonstration of a polyethylene encapsulation process, sponsored by the US Department of Energy (DOE) Office of Technology Development (OTD), was conducted at the Environmental & Waste Technology Center at Brookhaven National Laboratory (BNL.) in September 1994. As part of the Polymer Solidification National Effort, polyethylene encapsulation has been developed and tested at BNL as an alternative solidification technology for improved, cost-effective treatment of low-level radioactive (LLW), hazardous and mixed wastes. A fully equipped production-scale system, capable of processing 900 kg/hr (2000 lb/hr), has been installed at BNL. The demonstration covered all facets of the integrated processing system including pre-treatment of aqueous wastes, precise feed metering, extrusion processing, on-line quality control monitoring, and process control.

  18. SHAPE MEMORY EFFECT OF SLIGHTLY-CROSSLINKED POLYETHYLENE

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    A series of slightly crosslinked polyethylenes (SXLPE) was prepared by a one-step method using dicumyl peroxide as crosslinking agent in a Haake Mixer. The gel contents G (Soxhlet extracted) of the samples are in the range from 5% to 20% by weight.Their shear viscosity, crystallization and melting behavior, dynamic mechanical properties and shape recovery effect were systematically investigated in terms of the content of the crosslinking agent. It shows that under certain experimental conditions the SXLPE's may exhibit good shape fixation ability and shape memory properties, which are similar to those of the commercially available shape memory polyethylenes prepared by gamma-irradiation technique. However the shape memory behavior of these samples is not very stable due to their low crosslinking degree, or gel content. Thus their application is limited in special cases with fast strain fixing procedures.

  19. SILICA-SUPPORTED NICKEL AND ZIRCONIUM CATALYSTS FOR BRANCHED POLYETHYLENE

    Institute of Scientific and Technical Information of China (English)

    Ning Zhu; Yong Cui; Zi-long Li; Yong Chen; Wen-Hua Sun

    2003-01-01

    8-Aminoquinoline nickel dichloride and bis(cyclopentadienyl)zirconium dichloride (Cp2ZrC12) were supported simultaneously on silica to produce branched polyethylene successfully by combined polymerization. The supported polymerization results showed that the molecular weight of polyethylene increased while the molecular weight distribution became wider and the molecular chains of oligomers remaining in the final solution became shorter as compared to the oligomers obtained in polymerization processes with pure 8-aminoquinoline nickel dichloride catalysis, as well as the Cp2ZrC12 and nickel combination system. With decreasing amount of Ni catalyst in the supported catalyst, the molecular chains of oligomers in the resulting solution became shorter, while a-olefin selectivity increased.

  20. Effect of pressure on the crystallization behaviour of polyethylene terephthalate

    CERN Document Server

    Li Li; Huang Rui

    2002-01-01

    Crystallized polyethylene terephthalate (PET) samples were obtained at high pressures of 200-400 MPa at a temperature of 603 K, and another group of the samples were made at pressures of 250-350 MPa and different temperatures with a fixed supercooling. The samples were investigated by means of differential scanning calorimetry and scanning electron microscopy. Characterization results suggested that high pressure could increase the crystallization rate and promote the thickening process of PET lamellar crystals.

  1. Metal-backed versus all-polyethylene unicompartmental knee arthroplasty

    Science.gov (United States)

    Eaton, M. J.; Nutton, R. W.; Wade, F. A.; Evans, S. L.; Pankaj, P.

    2017-01-01

    Objectives Up to 40% of unicompartmental knee arthroplasty (UKA) revisions are performed for unexplained pain which may be caused by elevated proximal tibial bone strain. This study investigates the effect of tibial component metal backing and polyethylene thickness on bone strain in a cemented fixed-bearing medial UKA using a finite element model (FEM) validated experimentally by digital image correlation (DIC) and acoustic emission (AE). Materials and Methods A total of ten composite tibias implanted with all-polyethylene (AP) and metal-backed (MB) tibial components were loaded to 2500 N. Cortical strain was measured using DIC and cancellous microdamage using AE. FEMs were created and validated and polyethylene thickness varied from 6 mm to 10 mm. The volume of cancellous bone exposed to 3000 µε and > 7000 µε maximum principal (tensile) microstrain was computed. Results Experimental AE data and the FEM volume of cancellous bone with compressive strain FEM data correlated: R = 0.838, R2 = 0.702, percentage error 4.5% (p FEM strain patterns included MB lateral edge concentrations; AP concentrations at keel, peg and at the region of load application. Cancellous strains were higher in AP implants at all loads: 2.2- (10 mm) to 3.2-times (6 mm) the volume of cancellous bone compressively strained < -7000 µε. Conclusion AP tibial components display greater volumes of pathologically overstrained cancellous bone than MB implants of the same geometry. Increasing AP thickness does not overcome these pathological forces and comes at the cost of greater bone resection. Cite this article: C. E. H. Scott, M. J. Eaton, R. W. Nutton, F. A. Wade, S. L. Evans, P. Pankaj. Metal-backed versus all-polyethylene unicompartmental knee arthroplasty: Proximal tibial strain in an experimentally validated finite element model. Bone Joint Res 2017;6:22–30. DOI:10.1302/2046-3758.61.BJR-2016-0142.R1 PMID:28077394

  2. Polypropylene-(high density polyethylene) precipitation from stirred solutions

    OpenAIRE

    Esperidião,Maria Cecília Azevedo; Galembeck,Fernando

    1993-01-01

    Texto completo: acesso restrito. p.993–997 The fast precipitation of mixtures of polypropylene (PP) with high density polyethylene (HDPE) from decalin solutions is affected by the stirring rate of the solutions. With fast stirring, two types of precipitates were obtained viz. globules dispersed in the liquid phase and fibres adhering to the stirrer. Studies by i.r., WAXD, DSC and optical microscopy indicated that the fibrous precipitate is more birefringent, richer in HDPE and richer in th...

  3. RDX/Polyethylene Wax Compositions as Pressed Explosive,

    Science.gov (United States)

    1978-09-01

    polymeric binder, which is poured or extruded into the round and allowed to cure in situ to obtain a solid charge. The second approach is to coat a...explosive component, and an emulsifiable polyethylene wax , which has been suggested as a possible phiegmatiser to replace or supplement beeswax in...rough irregular surfaces of these particles that the wax does not actually coat the explosive, at least at these small concentra tions , but rather the

  4. THERMAL BEHAVIOR OF THERMOTROPIC HYDROXYETHYL CELLULOSE ACETATE/POLYETHYLENE BLENDS

    Institute of Scientific and Technical Information of China (English)

    WANG Hailin; CHEN Jinming; HUANG Yong; SHEN Jiarui

    1997-01-01

    The thermal behavior of thermotropic hydroxyethyl cellulose acetate (HECA)/polyethylene (PE) blends has been studied by DSC. It is found that the blends of HECA and PE are immiscible but the crystallization of PE is affected by HECA chains in the blends with more than 50% HECA, which results in the subordinate crystallization of PE and the formation of imperfect structures in the PE crystals. The imperfection of PE crystals in the blends can be eliminated after annealing at 393K.

  5. Electrical Properties of n-Butyl Acrylate-Grafted Polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Lee, C.R.; Oh, W.J.; Suh, K.S. [Korea University (Korea, Republic of)

    1997-04-01

    The electrical properties of n-butyl acrylate-grafted polyethylene (PE-g-nBA) were investigated. In PE-g-nBA, hetero charge founded in LDPE slightly increased due to the nBA grafting. Conduction currents decreased with the increase of nBA graft ratio. AC breakdown strength increased and water treeing length decreased with the increase of graft ratio in PE-g-nBA. (author). 4 refs., 6 figs.

  6. Multimeric, Multifunctional Derivatives of Poly(ethylene glycol

    Directory of Open Access Journals (Sweden)

    Gian Maria Bonora

    2011-07-01

    Full Text Available This article reviews the use of multifunctional polymers founded on high-molecular weight poly(ethylene glycol (PEG. The design of new PEG derivatives assembled in a dendrimer-like multimeric fashion or bearing different functionalities on the same molecule is described. Their use as new drug delivery systems based on the conjugation of multiple copies or diversely active drugs on the same biocompatible support is illustrated.

  7. Use of Polyethylene Fiber (Ribbond in Pediatric Dentistry

    Directory of Open Access Journals (Sweden)

    Eda Arat Maden

    2012-04-01

    Full Text Available Polyethylene fiber (Ribbond is a bondable, biocompatible, esthetic, translucent material. By virtue of its wide spectrum of intended properties, it enjoys various applications in clinical dentistry. Different clinical applications of Ribbond include space maintainers, fixed partial dentures with a natural tooth pontic, endodontic posts and cores and splint materials in children. Ribbond can be used as an alternative to conventional treatment in pediatric dentistry. [Arch Clin Exp Surg 2012; 1(2.000: 110-115

  8. SURFACE TREATMENT OF POLY(ETHYLENE TEREPHTHALATE) FABRIC WITH POLYETHYLENEIMINE

    Institute of Scientific and Technical Information of China (English)

    O.J. ATEIZA; I. HOLME; J.E. McINTYRE

    1997-01-01

    A branched polyethyleneimine (BPEI) was applied to poly(ethylene terephthalate)(PET) fabric to improve its surface moisture absorption so that the fabric becomes less liable to retention of electrostatic charge. The durability of this treatment was assessed by washing and followed by measurement of charge development on the fabric. The treated samples showed improved surface wetting compared to the untreated. The results are consistent with attachment of the BPEI to the PET surface by a cross-linking mechanism.

  9. The structural dilemma of bulk polyethylene: an intermediary structure.

    Directory of Open Access Journals (Sweden)

    Morteza Laridjani

    Full Text Available BACKGROUND: The Fourier space (reciprocal space image of bulk polyethylene consists of lines superimposed on the coherent diffuse background. The mixed character of the image indicates the complex nature of these compounds. The inability in detecting full images of reciprocal space of polymeric substances without Compton radiation and the other undesirable diffuse scatterings has misled the structural analysis (structural characterisation of these materials. PRINCIPAL FINDINGS: We propose the use of anomalous diffractometry where, it is possible to obtain a real image of reciprocal space without Compton radiation and other undesirable scatterings. By using classical diffractometry techniques this procedure is not possible. This methodology permitted us to obtain the "Direct Delta function", in the case of polycrystalline substances that was not previously detected. A new procedure was proposed to interpret the image of reciprocal space of bulk polyethylene. The results show the predominance of the geometry of local order determination compared to the crystal unit cell. The analysis of x-ray diffraction images illustrates that the elementary structural unit is a tetrahedron. This structural unit illustrates the atoms in the network scatter in a coherent diffuse manner. Moreover, the interference function derived from the coherent diffuse scattering dampens out quickly and the degree of randomness is superior to a liquid state. The radial distribution function derived from this interference function shows bond shortening in the tetrahedron configuration. It is this particular effect, which stabilises polyethylene. CONCLUSION: Here we show by anomalous diffractometry that the traditional concept of the two-phase or the crystal-defect model is an oversimplification of the complex reality. The exploitation of anomalous diffractometry has illustrated that polyethylene has an intermediate ordered structure.

  10. Gas permeability measurement in polyethylene and its copolymer films

    Energy Technology Data Exchange (ETDEWEB)

    Gholizadeh, M. [Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of)]. E-mail: Musavi@che.sharif.edu; Razavi, J. [Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of); Mousavi, S.A. [Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of)

    2007-07-01

    In this research, low density polyethylene (LDPE) and poly(ethylene-co-vinyl acetate) (EVA) were used as polymeric materials. The methods used to produce LDPE and EVA was film blowing and thermal-dry phase inversion. The amount of permeability, diffusivity and solubility of O{sub 2} and CO{sub 2} through above polymers were obtained and also the effect of temperature, pressure and film thickness for LDPE was measured. To study film cross-section morphology in EVA, scanning electron microscopy (SEM) was applied. The results showed that the amount of permeability and solubility were decreased by increasing film thickness but diffusivity was increased. However, by increasing temperature, permeability, solubility, and diffusivity were increased. From the results for EVA, adding 28% of vinyl acetate groups to polyethylene chain increased permeability of O{sub 2} and CO{sub 2} through the film. Scanning electron microscopy (SEM) microphotograph for EVA film verified that the film cross-section structure was as dense as for polyethylene.

  11. Preparation, Characterization and Dielectric Properties of Epoxy and Polyethylene Nanocomposites

    Science.gov (United States)

    Zhang, Chao; Mason, Ralf; Stevens, Gary

    Two very different kinds of polymer nanocomposites have been prepared, characterized and investigated by dielectric spectroscopy to investigate the effects of polymer-nanofiller matrix difference on the dielectric response of nanodielectric composites. Linear low density polyethylene (LLDPE) is a non-polar thermoplastic which has a high viscosity even in the melt phase and bisphenol-A epoxy resin with an anhydride hardener is a polar low viscosity thermosetting resin. Nanometric sized aluminium oxide filler was chosen as the common inorganic phase for both nanodielectrics. Generally, nanoparticles aggregate easily and are difficult to separate due to strong surface interactions. In this study various mixing methods were employed from ultrasonic liquid processing to controlled shear flow mixing to investigate the dispersion of the nanofillers. The resultant epoxy and polyethylene nanocomposites were characterized with SEM, TEM, and DSC. The dielectric properties and frequency response of the nanocomposites were measured in the frequency domain from 10-2 Hz to 106 Hz at different temperatures. In polyethylene nanocomposites, significant interfacial polarization is clearly seen. However, in epoxy nanocomposites, no obvious interfacial polarization is found. The results are discussed in terms of the difference in the electrical characteristics of the interfacial region between the polymers and the nano-alumina.

  12. HEAT SHRINKING BEHAVIOUR OF γ-RADIATION CROSSLINKED POLYETHYLENE

    Institute of Scientific and Technical Information of China (English)

    QI Yuchen; JIA Lianda; SONG Yongxian; WU Suyun; LI Lixia; CHEN Donglin

    1988-01-01

    Heat shrinking material of γ-radiation crosslinked polyethylene is widely used for various application in industry. In this study, DSC, TMA, WAXD and density measurement techniques were used to investigate the influence of MI and thermal history of LDPE on the effectiveness of network formation. Based on the results of heat stretching and heat shrinkage tests, it is found that the formation of a network as perfect as possible is indispensable to the irradiated material if good heat shrinkage property is desired. To this end, quenching technique and polyethylene with appropriate MI must be used so that an effective radiation effect will be obtained with a minimum amount of radiation dose. In spite of that the mechanical property of the irradiated polyethylene in the rubbery state is basically in agreement with the classical expression of the theory of high elasticity, only about90% shrinkage can be reached. Besides, the heat shrinkage temperature Ts and the % shrinkage S are both related to the radiation dose.

  13. gamma. radiolysis of polyethylene grafted with sytrene. [Gamma rays

    Energy Technology Data Exchange (ETDEWEB)

    Mitsui, H.; Shimizu, Y.

    1981-06-01

    ..gamma.. radiolysis of polyethylene grafted with styrene of 0-76 wt % was carried out at 30-100/sup 0/C in vacuo with a dose rate of 6.35 x 10/sup 5/ rad/hr. The formation of hydrogen and trans-vinylene unsaturation decreased as the content of styrene unit in polymer increased and the rate of formulation was described by zero-order formation kinetics with respect to each concentration combined with first-order disappearance. The gel fraction changed with the content of styrene unit according to irradation time and temperature. The gel data were evaluated by using the Charlesby-Pinner equation. Kinetic analysis showed that in ..gamma.. radiolysis of polyethylene grafted with styrene the formation of hydrogen is somewhat retarded, the crosslinking and main chain scission are accelerated, and the disappearance of hydrogen and formation and disappearance of trans-vinylene unsaturation are almost entirely unaffected. On the basis of these results the reactions induced by ..gamma.. rays in graft polymer were discussed in connection with the reaction mechanisms of the ..gamma.. radiolyses of polyethylene and polystyrene.

  14. Characterization of ecofriendly polyethylene fiber from plastic bag waste

    Science.gov (United States)

    Soekoco, Asril S.; Noerati, Komalasari, Maya; Kurniawan, Hananto, Agus

    2017-08-01

    This paper presents the characterization of fiber morphology, fiber count and tenacity of polyethylene fiber which is made from plastic bag waste. Recycling plastic bag waste into textile fiber has not developed yet. Plastic bag waste was recycled into fiber by melt spinning using laboratory scale melt spinning equipment with single orifice nozzle and plunger system. The basic principle of melt spinning is by melting materials and then extruding it through small orifice of a spinning nozzle to form fibers. Diameter and cross section shape of Recycled polyethylene fiber were obtained by using scanning electron microscope (SEM) instrumentation. Linear density of the recycled fiber were analyzed by calculation using denier and dTex formulation and The mechanical strength of the fibers was measured in accordance with the ASTM D 3379-75 standard. The cross section of recycled fiber is circular taking the shape of orifice. Fiber count of 303.75 denier has 1.84 g/denier tenacity and fiber count of 32.52 has 3.44 g/denier tenacity. This conditions is affected by the growth of polymer chain alignment when take-up axial velocity become faster. Recycled polyethylene fiber has a great potential application in non-apparel textile.

  15. Reasons of Revision for First-Generation Highly Crosslinked Polyethylenes

    Science.gov (United States)

    Kurtz, Steven M.; Medel, Francisco; MacDonald, Daniel; Parvizi, Javad; Kraay, Matthew; Rimnac, Clare

    2010-01-01

    Over a ten-year period, we prospectively evaluated the reasons for revision for contemporary and highly crosslinked polyethylene formulations in a multicenter retrieval program. 212 consecutive retrievals were classified as conventional gamma-inert sterilized liners (n=37), annealed (Crossfire™, n=72), or remelted (Longevity™, XLPE, Durasul; n=93). The most frequent reasons for revision were loosening (35%), instability (28%) and infection (21%) and were not related to polyethylene formulation (p = 0.17). Annealed and remelted liners had comparable linear penetration rates (0.03 and 0.04 mm/y, respectively, on average) and were significantly lower than conventional retrievals (0.11 mm/y; p ≤ 0.0005). This retrieval study including first-generation highly crosslinked liners demonstrated lower wear than conventional polyethylene. While loosening remained the most prevalent reason for revision, we could not demonstrate a relationship between wear and loosening. The long-term clinical performance of first-generation highly crosslinked remains promising, based on the mid-term outcomes of the components documented in this study. PMID:20541895

  16. Screening of stabilized crosslinked polyethylene using a novel wear tester.

    Science.gov (United States)

    Hoffmann, M; Gonzalez-Mora, V; Chiesa, R; Cigada, A; Stroosnijder, M F

    2002-01-01

    A novel pin-on-disk type wear tester is described allowing a rapid screening of different types of polyethylene under both unidirectional and multidirectional sliding motion. The wear of four polyethylene materials sliding against a roughened CoCrMo alloy was evaluated: a non-irradiated UHMWPE, a UHMWPE irradiated with a dose of 25 kGy in air, and two types of crosslinked UHMWPE (100 kGy, air), which were subjected to a stabilization heat treatment in nitrogen at 155 degrees C for 72 hours (XLPE I) and in water at 130 degrees C for 72 hours (XLPE II), respectively.Under multidirectional sliding conditions both types of XLPE exhibited significantly less wear with respect to the 25 kGy irradiated UHMWPE and the non-irradiated UHMWPE, even under the rough counterface conditions applied. Under unidirectional sliding motion both types of XLPE exhibited the highest wear of all materials tested, because the orientation hardening effect acting under linear lubricated condition is less pronounced for crosslinked polyethylene.

  17. Influence of flavour absorption by food-packaging materials (low-density polyethylene, polycarbonate and polyethylene terephthalate) on taste perception of a model solution and orange juice

    NARCIS (Netherlands)

    Willige, van R.W.G.; Linssen, J.P.H.; Legger, A.; Voragen, A.G.J.

    2003-01-01

    The influence of flavour absorption by low-density polyethylene (LDPE), polycarbonate (PC) and polyethylene terephthalate (PET) on taste perception of a model solution containing seven flavour compounds and orange juice in glass bottles was studied with and without pieces of the respective plastic

  18. 40 CFR 721.1729 - Boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Boric acid (H3BO3), mixed esters with... identified as boric acid (H3BO3), mixed esters with polyethylene glycol mono-Bu ether and polyethylene glycol... NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.1729 Boric...

  19. Influence of flavour absorption by food-packaging materials (low-density polyethylene, polycarbonate and polyethylene terephthalate) on taste perception of a model solution and orange juice

    NARCIS (Netherlands)

    Willige, van R.W.G.; Linssen, J.P.H.; Legger, A.; Voragen, A.G.J.

    2003-01-01

    The influence of flavour absorption by low-density polyethylene (LDPE), polycarbonate (PC) and polyethylene terephthalate (PET) on taste perception of a model solution containing seven flavour compounds and orange juice in glass bottles was studied with and without pieces of the respective plastic f

  20. Influence of Polyethylene and Oxidized Polyethylene Wax Emulsions on Leaching Dynamics of Boric Acid from Impregnated Spruce Wood

    Directory of Open Access Journals (Sweden)

    Boštjan Lesar

    2010-12-01

    Full Text Available Boron biocides belong to the most frequently used ingredients of commercial wood preservatives. They are very effective fungicides and insecticides, but they do not react with wood and thus leach from it in wet applications. This fact signifi cantly limits use of boron compounds in the field of wood preservation. In order to reduce leaching of boric acid, the emulsion of polyethylene (WE1 and an emulsion of oxidized polyethylene (WE6 wax were combined with boric acid (cB = 0.1 % or 0.5 % of boron. Spruce wood specimens were vacuum impregnated and afterwards leached according to the prCEN/TS 15119-1, EN 1250-2 and EN 84 procedures. The results showed that the boron leaching is predominantly infl uenced by moisture content of wood during leaching, and furthermore by the concentration gradient (frequency of water replacement. The fact that the prCEN/TS 15119-1 leaching procedure is less severe than other two methods is also refl ected in the results. The results of the EN 84 and ENV 1250 test are comparable, while the results of the prCEN/TS 15119-1 testing are not in line with the other two methods. Considerable portions of boron are leached from wood in the first leaching cycles, already. WE6 wax emulsion (oxidized polyethylene wax emulsion in combination with heat treatment reduces boron leaching to a certain extent. On the other hand, impregnation of wood with WE1 (polyethylene wax emulsion does not reduce it and it even enhances it.

  1. Mechanical, rheological, and bioactivity properties of ultra high-molecular-weight polyethylene bioactive composites containing polyethylene glycol and hydroxyapatite.

    Science.gov (United States)

    Ahmad, Mazatusziha; Uzir Wahit, Mat; Abdul Kadir, Mohammed Rafiq; Mohd Dahlan, Khairul Zaman

    2012-01-01

    Ultrahigh-molecular-weight polyethylene/high-density polyethylene (UHMWPE/HDPE) blends prepared using polyethylene glycol PEG as the processing aid and hydroxyapatite (HA) as the reinforcing filler were found to be highly processable using conventional melt blending technique. It was demonstrated that PEG reduced the melt viscosity of UHMWPE/HDPE blend significantly, thus improving the extrudability. The mechanical and bioactive properties were improved with incorporation of HA. Inclusion of HA from 10 to 50 phr resulted in a progressive increase in flexural strength and modulus of the composites. The strength increment is due to the improvement on surface contact between the irregular shape of HA and polymer matrix by formation of mechanical interlock. The HA particles were homogenously distributed even at higher percentage showed improvement in wetting ability between the polymer matrix and HA. The inclusion of HA enhanced the bioactivity properties of the composite by the formation of calcium phosphate (Ca-P) precipitates on the composite surface as proven from SEM and XRD analysis.

  2. Mechanical, Rheological, and Bioactivity Properties of Ultra High-Molecular-Weight Polyethylene Bioactive Composites Containing Polyethylene Glycol and Hydroxyapatite

    Directory of Open Access Journals (Sweden)

    Mazatusziha Ahmad

    2012-01-01

    Full Text Available Ultrahigh-molecular-weight polyethylene/high-density polyethylene (UHMWPE/HDPE blends prepared using polyethylene glycol PEG as the processing aid and hydroxyapatite (HA as the reinforcing filler were found to be highly processable using conventional melt blending technique. It was demonstrated that PEG reduced the melt viscosity of UHMWPE/HDPE blend significantly, thus improving the extrudability. The mechanical and bioactive properties were improved with incorporation of HA. Inclusion of HA from 10 to 50 phr resulted in a progressive increase in flexural strength and modulus of the composites. The strength increment is due to the improvement on surface contact between the irregular shape of HA and polymer matrix by formation of mechanical interlock. The HA particles were homogenously distributed even at higher percentage showed improvement in wetting ability between the polymer matrix and HA. The inclusion of HA enhanced the bioactivity properties of the composite by the formation of calcium phosphate (Ca-P precipitates on the composite surface as proven from SEM and XRD analysis.

  3. Efficient and selective degradation of polyethylenes into liquid fuels and waxes under mild conditions

    OpenAIRE

    Jia, Xiangqing; Qin, Chuan; Friedberger, Tobias; Guan, Zhibin; Huang, Zheng

    2016-01-01

    Polyethylene (PE) is the largest-volume synthetic polymer, and its chemical inertness makes its degradation by low-energy processes a challenging problem. We report a tandem catalytic cross alkane metathesis method for highly efficient degradation of polyethylenes under mild conditions. With the use of widely available, low-value, short alkanes (for example, petroleum ethers) as cross metathesis partners, different types of polyethylenes with various molecular weights undergo complete convers...

  4. Simulation of Flash Separation in Polyethylene Industrial Processing: Comparison of SRK and SL Equations of State

    OpenAIRE

    Costa, Glória Meyberg Nunes; Guerrieri, Y.; Kislansky, S.; F.L.P. Pessoa; Melo, Silvio Alexandre Beisl Vieira de; Embiruçu, Marcelo

    2009-01-01

    Texto completo: Acesso restrito. p. 8613–8628. The Soave−Redlich−Kwong (SRK) and the Sanchez and Lacombe (SL) equations of state are applied to the flash simulation of polyethylene industrial separators, specifically low-density polyethylene (eight resins) and linear low-density polyethylene (25 resins). Three mixing rules are used in the SRK equation: van der Waals (VDW) one-fluid, Wong−Sandler, and LCVM (linear combination of the Vidal and Michelsen mixing rules). The latter two mixing r...

  5. A Nanotechnology Approach to Lightweight Multifunctional Polyethylene Composite Materials for Use Against the Space Environment Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Polyethylene-based composite materials are under consideration as multifunctional structural materials, with the expectation that they can provide radiation...

  6. Manufacturing, structure and properties of recycled polyethylene terephthalate /liquid crystal polymer/montmorillonite clay nanocomposites

    Science.gov (United States)

    Japins, Guntis; Berzina, Rita; Zicans, Janis; Merijs Meri, Remo; Ivanova, Tatjana; Kalkis, Valdis; Reinholds, Ingars

    2013-12-01

    Polyethylene terephthalate (PET)/liquid crystal polymer (LCP)/monthmorillonite clay (MMT) compositions were obtained by melt mixing. Their mechanical, structural, rheological and thermal properties were investigated.

  7. Polyethylene glycol plus ascorbic acid for bowel preparation in chronic kidney disease.

    Science.gov (United States)

    Lee, Jae Min; Keum, Bora; Yoo, In Kyung; Kim, Seung Han; Choi, Hyuk Soon; Kim, Eun Sun; Seo, Yeon Seok; Jeen, Yoon Tae; Chun, Hoon Jai; Lee, Hong Sik; Um, Soon Ho; Kim, Chang Duck; Kim, Myung Gyu; Jo, Sang Kyung

    2016-09-01

    The safety of polyethylene glycol plus ascorbic acid has not been fully investigated in patients with renal insufficiency. High-dose ascorbic acid could induce hyperoxaluria, thereby causing tubule-interstitial nephritis and renal failure. This study aims to evaluate the safety and efficacy of polyethylene glycol plus ascorbic acid in patients with chronic kidney disease.We retrospectively reviewed prospectively collected data on colonoscopy in patients with impaired renal function. Patients were divided into 2 groups: 2 L polyethylene glycol plus ascorbic acid (n = 61) and 4 L polyethylene glycol (n = 80). The safety of the 2 groups was compared by assessing the differences in laboratory findings before and after bowel cleansing.The laboratory findings were not significantly different before and after the administration of 2 L polyethylene glycol plus ascorbic acid or 4 L polyethylene glycol. In both groups, the estimated glomerular filtration rate was not influenced by the administration of the bowel-cleansing agent. Patients' reports on tolerance and acceptability were better in the 2 L polyethylene glycol plus ascorbic acid group than in the 4 L polyethylene glycol group.The 2 L polyethylene glycol plus ascorbic acid solution is a safe choice for bowel preparation before colonoscopy in patients with impaired renal function.

  8. Growth of ZnO nanowires on nonwoven polyethylene fibers

    Directory of Open Access Journals (Sweden)

    Sunandan Baruah et al

    2008-01-01

    Full Text Available We report the growth of ZnO nanowires on nonwoven polyethylene fibers using a simple hydrothermal method at a temperature below the boiling point of water. The ZnO nanowires were grown from seed ZnO nanoparticles affixed onto the fibers. The seed ZnO nanoparticles, with diameters of about 6–7 nm, were synthesized in isopropanol by reducing zinc acetate hydrate with sodium hydroxide. The growth process was carried out in a sealed chemical bath containing an equimolar solution of zinc nitrate hexahydrate and hexamethylene tetramine at a temperature of 95 °C over a period of up to 20 h. The thickness and length of the nanowires can be controlled by using different concentrations of the starting reactants and growth durations. A 0.5 mM chemical bath yielded nanowires with an average diameter of around 50 nm, while a 25 mM bath resulted in wires with a thickness of up to about 1 μm. The length of the wires depends both on the concentration of the precursor solution as well as the growth duration, and in 20 h, nanowires as long as 10 μm can be grown. The nonwoven mesh of polyethylene fibers covered with ZnO nanowires can be used for novel applications such as water treatment by degrading pollutants by photocatalysis. Photocatalysis tests carried out on standard test contaminants revealed that the polyethylene fibers with ZnO nanowires grown on them could accelerate the photocatalytic degradation process by a factor of 3.

  9. The wear of cross-linked polyethylene against itself.

    Science.gov (United States)

    Joyce, T J; Ash, H E; Unsworth, A

    1996-01-01

    Cross-linked polyethylene (XLPE) may have an application as a material for an all-plastic surface replacement finger joint. It is inexpensive, biocompatible and can be injection-moulded into the complex shapes that are found on the ends of the finger bones. Further, the cross-linking of polyethylene has significantly improved its mechanical properties. Therefore, the opportunity exists for an all-XLPE joint, and so the wear characteristics of XLPE sliding against itself have been investigated. Wear tests were carried out on both reciprocating pin-on-plate machines and a finger function simulator. The reciprocating pin-on-plate machines had pins loaded at 10 N and 40 N. All pin-on-plate tests show wear factors from the plates very much greater than those of the pins. After 349 km of sliding, a mean wear factor of 0.46 x 10(-6) mm3/N m was found for the plates compared with 0.021 x 10(-6) mm3/N m for the pins. A fatigue mechanism may be causing this phenomenon of greater plate wear. Tests using the finger function simulator give an average wear rate of 0.22 x 10(-6) mm3/N m after 368 km. This sliding distance is equivalent to 12.5 years of use in vivo. The wear factors found were comparable with those of ultra-high molecular weight polyethylene (UHMWPE) against a metallic counterface and, therefore, as the loads across the finger joint are much less than those across the knee or the hip, it is probable that an all-XLPE finger joint will be viable from a wear point of view.

  10. Toughening wood/polypropylene composites with polyethylene octene elastomer (POE)

    Institute of Scientific and Technical Information of China (English)

    JIANG Feng; QIN Te-fu

    2006-01-01

    Polyethylene octene elastomer (POE) as impact modifier was incorporated into wood/polypropylene composites (WPC) to enhance the impact strength of the composite. Two extruding routes, i.e. direct extruding route and two-stage extruding route, were adopted to produce Wood Powder/PP/POE ternary composites. The mechanical and dynamic mechanical analysis (DMA) properties of the composites were investigated. The results showed that the addition of POE can increase the impact strength of the composites, and the composites produced via two-stage extruding route showed superior mechanical properties. The results of the DMA confirmed the mechanical tests.

  11. Thermal Decomposition of Copper Ore Concentrate and Polyethylene Composites

    Science.gov (United States)

    Szyszka, Danuta; Wieckowska, Jadwiga

    2016-10-01

    Thermal analyses (TGA and DTA) of the composite, comprised of 10% polyethylene (PE) scrap and 90% copper ore concentrate, enabled determination of the temperature range and decomposition degree of the organic matters in argon atmosphere. Products of pyrolysis were qualitatively and quantitatively determined. The results were compared to those obtained for products of pyrolysis of the composite in air. Products of pyrolysis were identified by means of the gas chromatography (GC) method alone or supported with results of mass spectrometry analyses (GC-MS).

  12. Electrical Properties of n-Butylacrylate Grafted Polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang R. [CRIEPI Post-Doc. (Japan); Oh, Woo J.; Suh, Kwang S. [Korea University (Korea, Republic of); Kim, Ok [Taekwang Research Center (Korea, Republic of)

    1998-01-01

    Electrical properties such as space charge accumulation, conduction, dielectric breakdown and water treeing of n-butylacrylate-grafted polyethylene ( PE-g-nBA ) were investigated. Heterocharge accumulates in PE-g-nBA and their amount is larger than that in LDPE. Conduction currents and charge mobilities of PE-g-nBAs decreased with the increase of nBA graft ratio, while their conduction mechanisms remain unchanged. Dielectric breakdown strength increased and water treeing length decreased with the increase of graft ratio in PE-g-nBA. (author). 20 refs., 9 figs., 1 tab.

  13. Investigation of crosslinking behaviour of silane grafted polyethylene through rheology

    Science.gov (United States)

    Obr, Ales; Zatloukal, Martin

    2013-04-01

    In this work the crosslinking behaviour of two silane-grafted polyethylenes was investigated with respect to time and temperature by using dynamic rheological measurements. It has been found that inhomogeneous character of the crosslinking reaction takes place in both tested samples. By utilization of G'-G" crossover method, it has been found that the sample with initially distinct crosslinking state and short critical crosslinking reaction time has high tendency to create small gels during production of hot water pipes. It has also been revealed that the temperature dependence of the critical time, at which the crosslinking speed is the highest, shows an Arrhenius-type behaviour.

  14. TSC STUDIES ON SUB-Tg STORAGE OF POLYETHYLENE TEREPHTHALATE

    Institute of Scientific and Technical Information of China (English)

    LI Wei; TONG Gang; ZHOU Yiqin; QI Zongneng

    1987-01-01

    The Thermally Stimulated Current (TSC) spectra of a series of Sub-Tg annealed polyethylene terephthalate (PET) specimens have been measured. It is found that there is only one peak at 80℃ above room temperature, which related to the thermo-relaxation of frozen-in dipoles. The activation energy of such dipole motion has been calculated. The relation between the maximum current and the storage time can be explained by the free volume theory and agrees with the results from the excess thermodynamic properties. Compared with Differential Scanning Calorimeter (DSC) and tensile stress-strain method, TSC is a simpler and more sensitive method in studying Sub-Tg annealed polymers.

  15. A novel preparation of milk protein/polyethylene terephthalate fabric

    Science.gov (United States)

    Zhou, J. F.; Zheng, D. D.; Zhong, L.; Zhang, F. X.; Zhang, G. X.

    2016-07-01

    In this work, -NH2 groups were introduced to polyethylene terephthalate (PET) fibers by nitration and reduction method, and then milk protein was grafted on the nitrated and reduced PET (NR PET) fibers by sucrose glycidyl ether crosslinking agent. FTIR suggested the milk protein was successfully grafted on PET fiber surface. SEM images showed a layer of substance covered on the PET fiber surface. DSC demonstrated an excellent thermal stability of milk protein/PET fiber. The moisture regain was improved by milk protein/PET fiber. Moreover, the crease recovery angle and stiffness were retained by the milk protein/PET fabric.

  16. Buckling of carbon nanotubes wrapped by polyethylene molecules

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Q., E-mail: Q_Wang@Umanitoba.c [Department of Mechanical and Manufacturing Engineering, University of Manitoba, Winnipeg, Manitoba, R3T 5V6 (Canada)

    2011-01-17

    The discovery of a buckling instability of a single-walled carbon nanotube wrapped by a polyethylene molecule subjected to compression is reported through molecular mechanics simulations. A decrease up to 44% in the buckling strain of the nano-structure owing to the van der Waals interaction between the two molecules is uncovered. A continuum model is developed to calculate both the interaction between the tube and the polymer and the decreased buckling strain of the structure by fitting the molecular mechanics results.

  17. Atomic structure of solid and liquid polyethylene oxide

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, J.A.; Saboungi, M.; Price, D.L.; Ansell, S. [Argonne National Laboratory, Argonne, Illinois 60439 (United States); Russell, T.P. [Polymer Science and Engineering Department, University of Massachusetts, Amherst, Massachusetts 01003 (United States); Halley, J.W.; Nielsen, B. [Department of Physics, University of Minnesota, Minneapolis, Minnesota 55455 (United States)

    1998-10-01

    The structure of polyethylene oxide (PEO) was investigated by neutron scattering in both semicrystalline and liquid states. Deuterated samples were studied in addition to the protonated ones in order to avoid the large incoherent scattering of hydrogen and identify features in the pair correlation functions attributable to C{endash}H pairs. Analysis of the deuterated sample gave additional information on the C{endash}O and C{endash}C pairs. The results are compared with molecular-dynamics simulations of liquid PEO. {copyright} {ital 1998 American Institute of Physics.}

  18. Lithium ion transport in a model of amorphous polyethylene oxide.

    Energy Technology Data Exchange (ETDEWEB)

    Boinske, P. T.; Curtiss, L.; Halley, J. W.; Lin, B.; Sutjianto, A.; Chemical Engineering; Univ. of Minnesota

    1996-01-01

    We have made a molecular dynamics study of transport of a single lithium ion in a previously reported model of amorphous polyethylene oxide. New ab initio calculations of the interaction of the lithium ion with 1,2-dimethoxyethane and with dimethyl ether are reported which are used to determine force fields for the simulation. We report preliminary calculations of solvation energies and hopping barriers and a calculation of the ionic conductivity which is independent of any assumptions about the mechanism of ion transport. We also report some details of a study of transport of the trapped lithium ion on intermediate time and length scales.

  19. Buckling of carbon nanotubes wrapped by polyethylene molecules

    Science.gov (United States)

    Wang, Q.

    2011-01-01

    The discovery of a buckling instability of a single-walled carbon nanotube wrapped by a polyethylene molecule subjected to compression is reported through molecular mechanics simulations. A decrease up to 44% in the buckling strain of the nano-structure owing to the van der Waals interaction between the two molecules is uncovered. A continuum model is developed to calculate both the interaction between the tube and the polymer and the decreased buckling strain of the structure by fitting the molecular mechanics results.

  20. Effective UV radiation dose in polyethylene exposed to weather

    Science.gov (United States)

    González-Mota, R.; Soto-Bernal, J. J.; Rosales-Candelas, I.; Calero Marín, S. P.; Vega-Durán, J. T.; Moreno-Virgen, R.

    2009-09-01

    In this work we quantified the effective UV radiation dose in orange and colorless polyethylene samples exposed to weather in the city of Aguascalientes, Ags. Mexico. The spectral distribution of solar radiation was calculated using SMART 2.9.5.; the samples absorption properties were measured using UV-Vis spectroscopy and the quantum yield was calculated using samples reflectance properties. The determining factor in the effective UV dose is the spectral distribution of solar radiation, although the chemical structure of materials is also important.

  1. Deuterated polyethylene coatings for ultra-cold neutron applications

    Energy Technology Data Exchange (ETDEWEB)

    Brenner, Th.; Geltenbort, P. [Institut Laue-Langevin, 38042 Grenoble Cedex 9 (France); Fierlinger, P.; Gutsmiedl, E.; Hollering, A.; Petzoldt, G.; Ruhstorfer, D.; Stuiber, St.; Taubenheim, B.; Windmayer, D. [Physikdepartment, Technische Universität München, D-85748 Garching (Germany); Lauer, T.; Schroffenegger, J.; Zechlau, T. [Forschungsneutronenquelle Heinz Maier-Leibnitz, Technische Universität München, D-85748 Garching (Germany); Seemann, K. M. [Physik-Department E21 & Heinz Maier-Leibnitz Zentrum (MLZ), Technische Universität München, D-85747 Garching (Germany); Soltwedel, O. [Max-Planck-Institute for Solid State Research, Outstation at MLZ, Lichtenbergstr. 1, 85747 Garching (Germany)

    2015-09-21

    We report on the fabrication and use of deuterated polyethylene as a coating material for ultra-cold neutron (UCN) storage and transport. The Fermi potential has been determined to be 214 neV, and the wall loss coefficient η is 1.3 × 10{sup 4} per wall collision. The coating technique allows for a wide range of applications in this field of physics. In particular, flexible and quasi-massless UCN guides with slit-less shutters and seamless UCN storage volumes become possible. These properties enable the use in next-generation measurements of the electric dipole moment of the neutron.

  2. Investigation of effect of electron beam on various polyethylene blends

    CERN Document Server

    Morshedian, J

    2003-01-01

    With regards to the expanding usage of electron beams irradiation in polymer industries such as sterilization of polymeric disposable medical products; cable manufacturing; pipes, heat shrinkable materials, etc. In this project the effect of electron beam on polyethylene used in manufacturing of pipe and heat shrinkable products was studied. Results showed that by increasing the applied dose on samples; the crosslink density would increase and polymers with tertiary carbon atoms in their backbone structure tend to crosslink more readily. The melting temperature and crystallinity percent decreased and degradation temperature increased. Density in low doses decreased and in high doses increased.

  3. Combustion Characteristics of Polyethylene and Coal Powder at High Temperature

    Institute of Scientific and Technical Information of China (English)

    LONG Shi-gang; CAO Feng; WANG Si-wei; SUN Liu-heng; PANG Jian-ming; SUN Yu-ping

    2008-01-01

    To study the combustion characteristics of the polyethylene (PE) particle and coal powder at blast temperature of the blast furnace, the contents of CO and CO2 of off-gas during the combustion of PE particle and coal powder at the 1 200 ℃ and 1 250 ℃ were measured using carbon monoxide and carbon dioxide infrared analyzer, and then the corresponding combustion ratio was calculated. The results showed that when the temperature is high, the combustion speed of PE and coal powder is high and the corresponding combustion ratio is high. Whereas, the combustion speed and ratio of PE are much higher than those of coal powder.

  4. Electron beam irradiation effects on poly(ethylene terephthalate)

    Energy Technology Data Exchange (ETDEWEB)

    Burillo, G. [Departamento de Quimica de Radiaciones y Radioquimica, Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, Ciudad Universitaria, Mexico, DF 04510 (Mexico)], E-mail: burillo@nucleares.unam.mx; Tenorio, L.; Bucio, E. [Departamento de Quimica de Radiaciones y Radioquimica, Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, Ciudad Universitaria, Mexico, DF 04510 (Mexico); Adem, E. [Departamento de Fisica Experimental, Instituto de Fisica, Universidad Nacional Autonoma de Mexico, Ciudad Universitaria, Mexico, DF 04510 (Mexico); Lopez, G.P. [Department of Chemical and Nuclear Engineering, Center for Biomedical Engineering, University of New Mexico, Albuquerque, NM 87131 (United States)

    2007-11-15

    Changes in poly(ethylene terephthalate) subjected to electron beam irradiation at doses up to 15 MGy and dose rate of 1.65 MGy/h, were investigated by differential scanning calorimetry, molecular weight measurement, X-ray photoelectron spectroscopy, and scanning electron microscopy. Irradiated samples showed a decrease of molecular weight with a minimum at 5 MGy, which is attributed to chain scission of the macromolecules and then an increase at further doses due to branching and some degradation effect. Irradiation in air is not an important factor because the high dose rate of irradiation inhibits oxygen diffusion in the samples.

  5. Degradation of crosslinked polyethylene in water by gamma-irradiation

    Science.gov (United States)

    Matsui, Tatsuro; Takano, Tadao; Takayama, Shigeru; Ito, Masayuki; Narisawa, Ikuo

    2002-02-01

    The degradation of crosslinked polyethylene by gamma-irradiation in water was studied. Change in the physical properties and the growth of carbonyl group after irradiation showed a good correlation. The degradation observed at 80°C is the least, and that at 60°C is the severest. The distribution of the oxidized layer in the sample was measured and was also calculated from the diffusion model using the observed parameters. Comparison of both results suggest that some products caused by gamma-irradiation of water supress the degradation of XLPE at 80°C.

  6. Capture and utilization of carbon dioxide with polyethylene glycol

    CERN Document Server

    Yang, Zhen-Zhen; He, Liang-Nian

    2012-01-01

    In this volume, Professor He and his coworkers summarize polyethylene glycol (PEG)-promoted CO2 chemistry on the basis of understanding about phase behavior of PEG/CO2 system and reaction mechanism at molecular level. As PEG could be utilized as a green replacement for organic solvents, phase-transfer catalyst, surfactant, support in various reaction systems, significantly promoting catalytic activity and recovering expensive metal catalysts, particularly regarded as a CO2-philic material, the authors focus on special applications of PEG in CO2 capture and utilization, including PEG-functional

  7. Effect of polyethylene glycol on characteristics of chitosan membranes

    Directory of Open Access Journals (Sweden)

    Puthai, W.

    2005-07-01

    Full Text Available This work reports the influence of polyethylene glycol (PEG on characteristics of chitosan membranes. Parameters used for membrane characterization were hydraulic permeability (Lp, molecular weight cut off (MWCO, and membrane impedance (Z. The results obtained from LP and Z imply that larger a amount of PEG addition enhances membrane porosity and enlarges the pore size. The prepared membranes were ultrafiltration type, with MWCO slightly greater than 35 kDa. Membranes without PEG additioncould be nanofiltration type with Lp value of 0.4x10-11 m3 N-1 s-1, 10-20 times smaller than the other.

  8. Factors associated with the loss of thickness of polyethylene tibial bearings after knee arthroplasty.

    Science.gov (United States)

    Collier, Matthew B; Engh, C Anderson; McAuley, James P; Engh, Gerard A

    2007-06-01

    Wear of the polyethylene tibial bearing is a leading cause of failure of knee replacements done prior to the current decade. The objective of this study was to determine how patient-related factors, implant-related factors, and limb or tibial component alignment influenced the amount of thickness loss in polyethylene tibial bearings that were retrieved at the time of revision surgery or after the death of the patient. We retrieved polyethylene tibial bearings from eighty-one unicondylar and eighty-nine total knee replacements that had been performed because of osteoarthritis with varus deformity from 1984 to 1998. All of the polyethylene bearings had been sterilized with gamma radiation in air. Polyethylene loss was quantified as the change in the minimum bearing thickness per years in vivo (the mean time in vivo [and standard deviation] was 8 +/- 4 years). Multiple linear regression was used to assess whether polyethylene loss was associated with age, weight, gender, varus angle of the tibial component, postoperative hip-knee-ankle angle, initial thickness of the polyethylene, shelf age of the polyethylene, and either the type of polyethylene (for total knee replacements, which were of one posterior cruciate ligament-retaining design) or the manufacturer (for unicondylar knee replacements), and to determine the magnitude by which polyethylene loss would change if any of the significant risk factors were changed. The mean loss (and standard deviation) of polyethylene thickness in the medial compartment of total knee replacements (0.33 +/- 0.28 mm/yr) and that in medial unicompartmental knee replacements (0.49 +/- 0.40 mm/yr) were significantly (p return for follow-up care. Whether the study findings have relevance to bearings sterilized with other methods is unclear and will remain so for many years. Prognostic Level II.

  9. Well-Defined Bilayered Molecular Cobrushes with Internal Polyethylene Blocks and ω-Hydroxyl-Functionalized Polyethylene Homobrushes

    KAUST Repository

    Zhang, Hefeng

    2016-02-15

    Novel well-defined bilayered molecular cobrushes with internal polyethylene blocks, P(PEcore-b-PScorona) (PE: polyethylene; PS: polystyrene), and ω-hydroxyl-functionalized polyethylene homobrushes, P(PE-OH), were synthesized through the macromonomer strategy. Two main steps were involved in the synthesis of the P(PEcore-b-PScorona) bilayered cobrushes: (i) formation of norbornyl-terminated macromonomer (Nor-PE-b-PS) by esterification of PS-b-PE-OH (combination of anionic polymerization, hydroboration, and polyhomologation) with 5-norbornene-2-carboxylic acid and (ii) ring-opening metathesis polymerization (ROMP) of Nor-PE-b-PS. The synthesis of P(PE-OH) was achieved by (i) hydroboration of tert-butyldimethylsilyl-protected allyl alcohol, followed by polyhomologation of dimethylsulfoxoniun methylide with the formed tri[3-(tert-butyldimethylsilyloxyl)propyl]borane initiator, oxidation/hydrolysis, and esterification of the TBDMS-O-PE-OH with 5-norbornene-2-carboxylic acid to afford the macromonomer TBDMS-O-PE-Nor, and (ii) ROMP of TBDMS-O-PE-Nor, followed by deprotection. Nuclear magnetic resonance spectroscopy (1H and 13C NMR) and high temperature gel permeation chromatography (HT-GPC) were used to characterize all macromonomers/molecular brushes and differential scanning calorimetry (DSC) to study the thermal properties. The molecular brush P(PE-b-PS) showed lower melting point (Tm) and better solubility in toluene than the corresponding macromonomer PS-b-PE-Nor. In the case of homobrushes, the thermal properties were strongly affected by the presence of the PE end-groups. © 2016 American Chemical Society.

  10. REACTION MECHANISM OF BENZOPHENONE-PHOTOINITIATED CROSSLINKING OF POLYETHYLENE

    Institute of Scientific and Technical Information of China (English)

    Bao-jun Qu

    2002-01-01

    The radical intermediates, the crosslink microstructures, and the reaction mechanism of benzophenone (BP)-photoinitiated crosslinking of low-density polyethylene (LDPE) and model compounds (MD) have been reviewed in detail.The spin-trapping electron spin resonance (ESR) spectra obtained from the LDPE/BP systems with spin-trap agents showthat two kinds of polymer radical intermediates are mainly formed: tertiary carbon and secondary carbon radicals. The spin-trapping ESR studies of MD/BP systems give further evidence that photocrosslinking reactions of PE predominantly takeplace at sites of tertiary carbon, secondary carbon, and especially allylic carbon when available. The high resolution 13C-NMR spectra obtained from LDPE and MD systems show that the crosslink microstructures have H- and Y-type links andthat their concentrations are of the same order. The fluorescence, ESR, 13C and 1H-NMR spectra from the PE and MDsystems demonstrate that the main photoreduction product of BP (PPB) is benzpinacol formed by the recombination of twodiphenylhydroxymethyl (K*) radical intermediates. Two new PPB products: an isomer of benzpinacol with quinoid structure,1-phenylhydroxymethylene-4-diphenylhydroxymethyl-2,5-cyclohexadiene and three kinds of a-alkyl-benzhydrols have beendetected and identified. These results provide new experimental evidence for elucidating the reaction mechanism in the BP-photoinitiated crosslinking of polyethylene.

  11. Properties of Raphia Palm Interspersed Fibre Filled High Density Polyethylene

    Directory of Open Access Journals (Sweden)

    Henry C. Obasi

    2013-01-01

    Full Text Available Blends of nonbiodegradable and biodegradable polymers can promote a reduction in the volume of plastic waste when they undergo partial degradation. In this study, properties of raphia palm interspersed fibre (RPIF filled high density polyethylene (HDPE have been investigated at different levels of filler loadings, 0 to 60 wt.%. Maleic anhydride-graft polyethylene was used as a compatibilizer. Raphia palm interspersed fibre was prepared by grinding and sieved to a particle size of 150 µm. HDPE blends were prepared in a corotating twin screw extruder. Results showed that the tensile strength and elongation at break of the blends decreased with increase in RPI loadings and addition of MA-g-PE was found to improve these properties. However, the Young’s modulus increased with increase in the amount of RPI into HDPE and compatibilization further increased the Young’s modulus. The water absorption indices and weight loss for RPI/HDPE composites were found to increase with RPI loadings but were decreased on addition of MA-g-PE.

  12. Curing characteristics of chlorosulphonated polyethylene and natural rubber blends

    Directory of Open Access Journals (Sweden)

    M. MARINOVIC-CINCOVIC

    2005-05-01

    Full Text Available The dependence of the Mooney scorch time and cure index on the blend ratio of chlorosulphonated polyethylene/natural rubber (CSM/SMR 20 CV and chlorosulphonated polyethylene/chlorinated natural rubber (CSM/Pergut S 40 blends were determined in the temperature range from 120 oC to 160 oC using a Monsanto Mooney viscometer. Semi-efficient vulcanization systems were used for the study. The morphology of the fracture surface of the crosslinked systems was determined by Scanning Electron Microscopy (SEM. The results showed that the scorch time decreased with increasing SMR 20 CV and Pergut S 40 contents. This observation is attributed to the increasing solubility of sulfur, as the content of SMR 20 CV and Pergut S 40 in the composition increased. For temperatures greater than 140 oC, the dependence of the scorch time on blend ratios diminishes, as enough thermal energy is available to overcome the activation energy of vulcanization. The differing curing characteristics of the two blends is explained by the compatibility factor of the respective blend. Morphological analysis of the blends shows a very satisfactory agreement.

  13. Organically modified hydrotalcite for compounding and spinning of polyethylene nanocomposites

    Directory of Open Access Journals (Sweden)

    L. Fambri

    2013-11-01

    Full Text Available Organically modified hydrotalcite is a recent class of organoclay based on layered double hydroxides (LDH, which is anionically modified with environmental friendly ligands such as fatty acids. In this paper the influence of hydrotalcite compounded/dispersed by means of two different processes for production of plates and fibers of polyolefin nanocomposites will be compared. A polyethylene matrix, suitable for fiber production, was firstly compounded with various amounts of hydrotalcite in the range of 0.5–5% by weight, and then compression moulded in plates whose thermomechanical properties were evaluated. Similar compositions were processed by using a co-rotating twin screw extruder in order to directly produce melt-spun fibers. The incorporation of clay into both bulk and fiber nanocomposites enhanced the thermal stability and induced heterogeneous nucleation of polyethylene crystals. Hydrotalcite manifested a satisfactory dispersion into the polymer matrix, and hence positively affected the mechanical properties in term of an increase of both Young’s modulus and tensile strength. Tenacity of nanocomposite as spun fibers was increased up to 30% with respect to the neat polymer. Moreover, the addition of LDH filler induced an increase of the tensile modulus of drawn fibers from 5.0 GPa (neat HDPE up to 5.6–5.8 GPa.

  14. Micropatterning of poly(ethylene glycol) diacrylate hydrogels.

    Science.gov (United States)

    Ali, Saniya; Cuchiara, Maude L; West, Jennifer L

    2014-01-01

    This protocol describes the techniques to synthesize and fabricate micropatterned poly(ethylene glycol) diacrylate-based hydrogels that can be used as substrates in cellular studies and tissue engineering scaffolds. These materials provide an essentially bioinert background material due to the very low protein adsorption characteristics of poly(ethylene glycol), but the materials can be modified with covalently grafted peptides, proteins, or other biomolecules of interest to impart specific biofunctionality to the material. Further, it is possible to use micropatterning technologies to control the localization of such covalent grafting of biomolecules to the hydrogel materials, thus spatially controlling the cell-material interactions. This protocol presents a relatively simple approach for mask-based photolithographic patterning, generally best suited for patterning the surface of hydrogel materials for 2D cell studies. A more sophisticated technique, two-photon laser scanning lithography, is also presented. This technique allows free-form, 3D micropatterning in hydrogels. Copyright © 2014 Elsevier Inc. All rights reserved.

  15. CURING AND MECHANICAL PROPERTIES OF CHLOROSULPHONATED POLYETHYLENE RUBBER BLEND

    Directory of Open Access Journals (Sweden)

    Jaroslava Budinski-Simendić

    2011-09-01

    Full Text Available In this paper, the curing and mechanical properties of two series of prepared blends, i.e., chlorosulphonated polyethylene (CSM/isobutylene-co-isoprene (IIR rubber blends and chlorosulphonated polyethylene (CSM/chlorinated isobutylene-co-isoprene (CIIR rubber blends were carried out. Blends were prepared using a two-roll mill at a temperature of 40-50 °C. The curing was assessed using a Monsanto oscillating disc rheometer R-100. The process of vulcanization accelerated sulfur of pure rubbers and their blends was carried out in an electrically heated laboratory hydraulic press under a pressure of about 4 MPa and 160 °C. The stress-strain experiments were performed using a tensile tester machine (Zwick 1425. Results indicate that the scorch time, ts2, and optimum cure time, tc90, increase with increasing CSM content in both blends. The value of modulus at 100 and 300% elongation and tensile strength increases with increasing CSM content, whereas elongation at break shows a decreasing trend. The enhancement in mechanical properties was supported by data of crosslink density in these samples obtained from swelling measurement and scanning electron microscopy studies of the rubber blends fractured surfaces

  16. Extrusion foaming of protein-based thermoplastic and polyethylene blends

    Science.gov (United States)

    Gavin, Chanelle; Lay, Mark C.; Verbeek, Casparus J. R.

    2016-03-01

    Currently the extrusion foamability of Novatein® Thermoplastic Protein (NTP) is being investigated at the University of Waikato in collaboration with the Biopolymer Network Ltd (NZ). NTP has been developed from bloodmeal (>86 wt% protein), a co-product of the meat industry, by adding denaturants and plasticisers (tri-ethylene glycol and water) allowing it to be extruded and injection moulded. NTP alone does not readily foam when sodium bicarbonate is used as a chemical blowing agent as its extensional viscosity is too high. The thermoplastic properties of NTP were modified by blending it with different weight fractions of linear low density polyethylene (LLDPE) and polyethylene grafted maleic anhydride (PE-g-MAH) compatibiliser. Extrusion foaming was conducted in two ways, firstly using the existing water content in the material as the blowing agent and secondly by adding sodium bicarbonate. When processed in a twin screw extruder (L/D 25 and 10 mm die) the material readily expanded due to the internal moisture content alone, with a conditioned expansion ratio of up to ± 0.13. Cell structure was non-uniform exhibiting a broad range cell sizes at various stages of formation with some coalescence. The cell size reduced through the addition of sodium bicarbonate, overall more cells were observed and the structure was more uniform, however ruptured cells were also visible on the extrudate skin. Increasing die temperature and introducing water cooling reduced cell size, but the increased die temperature resulted in surface degradation.

  17. Cancellous bone homograft storage with aluminium-polyethylene bags.

    Science.gov (United States)

    Meana, A; Martinez, R; Cañal, P; Arriaga, M J; Román, F San; Llames, S; Orós, C; Moreno, A; Fernandez, C

    2006-01-01

    In order to transport and cryopreserve human tissues, it is essential to have an easy-to-use recipient where tissues can be kept in sterile conditions. Here we show the results obtained by using Macopharma's tissue freezing bags, an aluminium-polyethylene multilayer bag, in our tissue bank of the Centro Comunitario de Sangre y Tejidos de Asturias. Five hundred and twenty-seven cancellous bone homografts were obtained from hospitals located 120 km around our Bank. The homografts were submitted to bacteriological controls and sent to our bank in these bags. They were stored at -70 degrees C and sent in dry ice to about 50 hospitals, where the tissue was bacteriologically controlled and grafted. Furthermore, the behaviour of these bags at -140 degrees C (vapour nitrogen) or -196 degrees C (liquid nitrogen) was tested. Our results indicate that Macopharma aluminium-polyethylene bags are suitable for the transporting and cryopreserving of cancellous bone homografts. These bags could also be used for keeping tissues in nitrogen containers.

  18. High-speed spinning of ultra-high molecular weight polyethylene fibres

    NARCIS (Netherlands)

    Roukema, Mees

    1991-01-01

    This thesis deals with the spinning of ultra-high molecular weight polyethylene ( UHMWPE ) fibres at high speeds, and the effects of the spinning parameters on the fibre properties. Polyethylene fibres with strengths up to 7.2 GPa can be produced in a gel-spinning and hot-drawing procedure. In this

  19. 75 FR 6634 - Polyethylene Terephthalate Film, Sheet, and Strip from India: Final Results of Countervailing...

    Science.gov (United States)

    2010-02-10

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip from India: Final Results... terephthalate film, sheet, and strip (PET film) from India for the period January 1, 2007 through December 31, 2007. See Polyethylene Terephthalate Film, Sheet, and Strip from India: Preliminary Results...

  20. 76 FR 58248 - Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, In Part, of...

    Science.gov (United States)

    2011-09-20

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, In... (CVD) order on polyethylene terephthalate film, sheet and strip from India covering the period January... companies: Ester Industries Limited, Garware Polyester Ltd., Jindal Poly Films Limited of India,...

  1. 77 FR 46687 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of Antidumping...

    Science.gov (United States)

    2012-08-06

    ... Review, 73 FR 71601 (November 25, 2008); see also Certain Polyethylene Terephthalate Film, Sheet and... Republic of China: Final Results of Antidumping Duty Administrative Review and New Shipper Review, 73 FR...: Final Modification, 77 FR 8101 (February 14, 2012). \\52\\ See Polyethylene Terephthalate Film, Sheet,...

  2. 76 FR 9745 - Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Final Results of Antidumping Duty...

    Science.gov (United States)

    2011-02-22

    ... Film from the People's Republic of China (PRC), for which the scope is essentially identical to the... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Final Results... terephthalate film (PET Film) from Taiwan. See Polyethylene Terephthalate Film, Sheet, and Strip From...

  3. High-speed spinning of ultra-high molecular weight polyethylene fibres

    NARCIS (Netherlands)

    Roukema, Mees

    1991-01-01

    This thesis deals with the spinning of ultra-high molecular weight polyethylene ( UHMWPE ) fibres at high speeds, and the effects of the spinning parameters on the fibre properties. Polyethylene fibres with strengths up to 7.2 GPa can be produced in a gel-spinning and hot-drawing procedure. In this

  4. 78 FR 60311 - Polyethylene Terephthalate Film, Sheet, and Strip From Brazil, China, and the United Arab...

    Science.gov (United States)

    2013-10-01

    ... methods; development efforts; ability to increase production (including the shift of production facilities... COMMISSION Polyethylene Terephthalate Film, Sheet, and Strip From Brazil, China, and the United Arab Emirates... order on polyethylene terephthalate (``PET'') film, sheet, and strip from Brazil, China, and the United...

  5. Platelet deposition studies on copolyether urethanes modified with poly(ethylene oxide)

    NARCIS (Netherlands)

    Brinkman, E.; Foot, A.; van der Does, L.; Bantjes, A.

    1990-01-01

    Pellethane ® 2363 80A films and tubings were chemically modified and the effect of these modifications on platelet deposition was studied. Grafting of high molecular weight poly(ethylene oxide) and graft polymerization of methoxy poly(ethylene glycol) 400 methacrylate resulted in surfaces with a

  6. Properties of high density polyethylene – Paulownia wood flour composites via injection molding

    Science.gov (United States)

    Paulownia wood (PW) flour is evaluated as a bio-based fiber reinforcement. Composites of high density polyethylene (HDPE), 25% by weight of PW, and either 0% or 5% by weight of maleated polyethylene (MAPE) were produced by twin screw compounding followed by injection molding. Molded test composite...

  7. 76 FR 47546 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of Antidumping...

    Science.gov (United States)

    2011-08-05

    ... Strip from India, 67 FR 44175 (July 1, 2002) (PET Film India Order). On July 1, 2010, the Department... Duty Determination: Polyethylene Terephthalate Film, Sheet, and Strip (PET Film) From India, 67 FR... Determination: Polyethylene Terephthalate Film, Sheet, and Strip From India, 66 FR 65893 (December 21, 2001),...

  8. 75 FR 22842 - Polyethylene Retail Carrier Bags From Indonesia, Taiwan, and Vietnam

    Science.gov (United States)

    2010-04-30

    ... COMMISSION Polyethylene Retail Carrier Bags From Indonesia, Taiwan, and Vietnam Determinations On the basis... imports from Vietnam of polyethylene retail carrier bags (PRCBs), provided for in subheading 3923.21.00 of... Commerce (Commerce) to be subsidized by the Government of Vietnam.\\2\\ The Commission further...

  9. 76 FR 26241 - Polyethylene Retail Carrier Bags From Thailand: Extension of Time Limit for Preliminary Results...

    Science.gov (United States)

    2011-05-06

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF COMMERCE International Trade Administration Polyethylene Retail Carrier Bags From Thailand: Extension of Time Limit for... polyethylene retail carrier bags from Thailand for the period August 1, 2009, through July 31, 2010....

  10. 75 FR 25207 - Polyethylene Retail Carrier Bags From Malaysia: Extension of Time Limit for Preliminary Results...

    Science.gov (United States)

    2010-05-07

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF COMMERCE International Trade Administration A-557-813 Polyethylene Retail Carrier Bags From Malaysia: Extension of Time... administrative review of the antidumping duty order on polyethylene retail carrier bags from Malaysia for...

  11. Effects of metal-inlay thickness in polyethylene cups with metal-on-metal bearings.

    NARCIS (Netherlands)

    Verdonschot, N.J.J.; Vena, P.; Stolk, J.; Huiskes, R.

    2002-01-01

    A way to prevent polyethylene wear in total hip replacements is to use metal-on-metal bearings. The cup design of these bearings may be a metal inlay in a polyethylene cup. However, these metal inlays are relatively thin and may deform on loading. The purpose of the current study was to determine wh

  12. Polyethylene glycol-hirudin conjugates, process for preparing them and their use for the treatment of thromboses

    NARCIS (Netherlands)

    Bischoff, Rainer; Transgene, S.A.

    1994-01-01

    The present invention relates to a process for preparing a polyethylene glycol (or derivatives)-hirudin conjugate. It also relates to the polyethylene glycol (or derivatives)-hirudin conjugate obtained and its use as medicinal product for the..

  13. An Investigation on Rheology of Peroxide Cross-linking of Low Density Polyethylene

    DEFF Research Database (Denmark)

    Ghasemi, Ismaeil; Rasmussen, Henrik K.; Szabo, Peter

    2005-01-01

    One of the most important post-reactor modifications of polyethylene is cross-linking. It improves some properties of polyethylene such as environmental stress cracking resistance, chemical and abrasion resistance, and service temperature. In this study, the effect of peroxide cross-linking on th......One of the most important post-reactor modifications of polyethylene is cross-linking. It improves some properties of polyethylene such as environmental stress cracking resistance, chemical and abrasion resistance, and service temperature. In this study, the effect of peroxide cross......-linking on the rheological behaviour of low density polyethylene was investigated by using a combination of creep test and differential scanning calorimeter (DSC) in isotherm condition. The used peroxide was di-cumyl peroxide and its concentration was 2 wt%. The experiments were carried out at 150,160, and 170 degrees C...

  14. Thermo-Gelation of Surface-Modified Polyethylene Microgels from Fragmentation and Immiscible Blends

    Science.gov (United States)

    Ling, Gerald H.; Shaw, Montgomery T.

    2008-07-01

    Polyethylene microgels were created by swollen-state grinding and ultrasonic fragmentation of bulk crosslinked polyethylene (XLPE) suspended in squalane, and by the extraction of crosslinked-polyethylene micro-domains from an immiscible blend of polyethylene (PE) and polystyrene (PS). Crosslinking of the polyethylene micro-domains in the blend was achieved by exposure to an electron beam. Suspensions of both microgels in squalane exhibit thermal gelation upon cooling where both G' and G″ increase by up to five-orders in magnitude when probed using small-angle oscillatory shear. We propose that this phenomenon is attributed to weak short-range interactions among the particles whereby surface terminal chains on the microgels can co-crystallize forming inter-particle bonds. However, these interactions are mild enough that the systems may be reverted to its original state by applying higher shear stresses at elevated temperatures.

  15. Qualitative comparison of polyethylene terephthalate flakes from various collection systems in Germany.

    Science.gov (United States)

    Snell, H; Nassour, A; Nelles, M

    2017-02-01

    In 2003, a deposit system for one-way packaging was introduced in Germany. Since that time, polyethylene terephthalate beverage packaging is collected through various collection systems, a deposit system, a reusable packaging system and the 'Green Dot' (the dual system) with the yellow bag. The manner of collection had a decisive influence on the quality of the generated recycled materials. The research at hand shows for the first time how the quality of polyethylene terephthalate flakes depends on the type of collection system. The results are based on a 14-year time frame, during which the quality of the polyethylene terephthalate flakes was examined using the different collection systems. The criterion used was the amount of contamination of polyethylene terephthalate flakes with various polymers, metals and other substances. Grain size and bulk density were also compared. The outcome shows that material from the deposit systems resulted in a better quality of polyethylene terephthalate (PET) flakes.

  16. Use of Silicone Sizers in Implantation of Porous Polyethylene Nasal Dorsal Implants in Asians

    Directory of Open Access Journals (Sweden)

    Randal Pham

    2011-01-01

    Full Text Available Introduction. A new technique of implantation of high-density porous polyethylene nasal dorsal implants in Asians is described in this paper. Silicone sizers, which have smooth surfaces, were used to facilitate implantation of porous polyethylene implants in Asian patients. Materials and Methods. Twenty-three patients of Asian descent underwent dorsal augmentation rhinoplasty with open technique using high-density porous polyethylene implants. In all cases, silicone sizers were used to facilitate implantations of high-density porous polyethylene nasal dorsal implants. Patient selection criteria exclude patients with history of cocaine use, history of nasal or sinus disorders, previous nasal surgery, deviated septum, poor cartilage support, and thin skin. Results. No bleeding, infection, rejection, displacement, or extrusion was noted. One implant was removed because of a patient's dissatisfaction with the resulting tip height. Conclusion. The use of silicone sizers to facilitate implantations of high-density porous polyethylene nasal dorsal implants was safe and efficacious.

  17. Preparation of High Density Polyethylene/Waste Polyurethane Blends Compatibilized with Polyethylene-Graft-Maleic Anhydride by Radiation

    Directory of Open Access Journals (Sweden)

    Jong-Seok Park

    2015-04-01

    Full Text Available Polyurethane (PU is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, PU recycling has received significant attention due to environmental issues. In this study, we developed a recycling method for waste PU that utilizes the radiation grafting technique. Grafting of waste PU was carried out using a radiation technique with polyethylene-graft-maleic anhydride (PE-g-MA. The PE-g-MA-grafted PU/high density polyethylene (HDPE composite was prepared by melt-blending at various concentrations (0–10 phr of PE-g-MA-grafted PU. The composites were characterized using fourier transform infrared spectroscopy (FT-IR, and their surface morphology and thermal/mechanical properties are reported. For 1 phr PU, the PU could be easily introduced to the HDPE during the melt processing in the blender after the radiation-induced grafting of PU with PE-g-MA. PE-g-MA was easily reacted with PU according to the increasing radiation dose and was located at the interface between the PU and the HDPE during the melt processing in the blender, which improved the interfacial interactions and the mechanical properties of the resultant composites. However, the elongation at break for a PU content >2 phr was drastically decreased.

  18. Well-defined 4-arm stars with hydroxy-terminated polyethylene, polyethylene-b-polycaprolactone and polyethylene-b-(polymethyl methacrylate) 2 arms

    KAUST Repository

    Zhang, Zhen

    2016-07-20

    Bis-boron-thexyl-silaboracycle was prepared by hydroboration of 1,4-bis(methyldivinylsilyl)butane with thexylborane and used to initiate the polyhomologation of dimethylsulfoxonium methylide to afford well-defined hydroxy-terminated 4-arm polyethylene (PE) stars. The synthesized PE stars were transformed to (PE-b-PCL)4 starblock copolymers via the ring-opening polymerization of ϵ-caprolactone (CL) initiated by the hydroxyl end groups of (PE-OH)4 in the presence of P2-tBu phosphazene base. Esterification of the hydroxyl groups of the OH-terminated PE star with 2,2-dichloroacetyl chloride led to (PE-Cl2)4 which was used as initiator (eight initiating atom transfer radical polymerization, ATRP, sites) for the synthesis of (PE-b-PMMA2)4 dendrimer-like stars by the ATRP of methyl methacrylate (MMA). All intermediates and final products were characterized by high temperature gel permeation chromatography and proton nuclear magnetic resonance spectroscopy. © 2016 The Royal Society of Chemistry.

  19. Structure and biocompatibility of ion beam modified polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Svorcik, V.; Rybka, V. [Institute of Chemical Technology, Prague (Czech Republic). Dept. of Solid State Engineering; Hnatowicz, V. [Academy of Sciences of Czech Republic, Rez (Czech Republic). Inst. of Nuclear Physics; Smetana, K. [Charles University, Prague (Czech Republic). First Faculty of Medicine

    1997-07-01

    Structural changes of polyethylene (PE), induced by irradiation with 40 keV Ar{sup +} ions at a fluence of 1 x 10{sup 12}-1 x 10{sup 15} cm{sup -2}, are characterized by different experimental methods and physical parameters of the modified PE are related to its biocompatibility. Production of oxidized structures and conjugated double bonds in the PE surface layer modified by the ion irradiation was proved using IR, UV-VIS spectroscopies and a Rutherford backscattering technique. The fusion of macrophages onto implants made of as-irradiated and chemically doped PE was studied in vivo. It was found that the free surface energy is not a decisive factor affecting the non-self-recognition of the modified PE by macrophages. The fusion of macrophages, however, was found to be different on the as-irradiated specimens and the specimens additionally doped with acrylic acid. (author).

  20. Neutral polyethylene oxide with a cofactor recommended for particle flocculation

    Directory of Open Access Journals (Sweden)

    M. R Abdallah/Qasaimeh

    2011-09-01

    Full Text Available Conventional and neutral high molecular weight polyethylene oxide (PEO adsorbs on some colloids and fines, flocculating them into flocs. Addition of a cofactor (CF makes PEO adsorb on all types of colloids and fines, flocculating them into larger flocs. Homoflocculation of fines with PEO alone and with CF added prior to PEO were investigated in this work at low and high effective shear rates. CF role was investigated: it enhanced flocculation amplitude and rate by several magnitudes relative to PEO used alone, and was ascribed to the CF action to stiffen and extend PEO coils. Considering CF-PEO abilities in homoflocculation and in heteroflocculation as recorded in the literature, combination of homo - and heteroflocculation can now be applied to processes. Formed flocs and individual particles will simultaneously deposit onto fibers and, when filtered, particles will be retained in the fiber cake. This technique can be applied in industry processes and water treatment.

  1. Laser-generated plasma by carbon nanoparticles embedded into polyethylene

    Science.gov (United States)

    Torrisi, L.; Ceccio, G.; Cutroneo, M.

    2016-05-01

    Carbon nanoparticles have been embedded into polyethylene at different concentrations by using chemical-physical processes. The synthesized material was characterized in terms of physical modifications concerning the mechanical, compositional and optical properties. Obtained flat targets have been irradiated by Nd:YAG laser at intensities of the order of 1010 W/cm2 in order to generate non-equilibrium plasma in vacuum. The laser-matter interaction produces charge separation effects with consequent acceleration of protons and carbon ions. Plasma was characterized using time-of-flight measurements of the accelerated ions. Applications of the produced targets in order to generate carbon ion beams from laser-generated plasma are presented and discussed.

  2. TNSA and ponderomotive plasma production in enriched carbon polyethylene foils

    Science.gov (United States)

    Torrisi, L.; Cutroneo, M.; Ullschmied, J.

    2017-04-01

    Proton and carbon ion acceleration in a target-normal-sheath-acceleration regime produced by a laser intensity of 1016 W/cm2 was investigated using thin polyethylene foils. Measurements performed at the PALS facility in Prague demonstrate forward ion acceleration above 1 MeV per charge state. The ion acceleration is higher in thinner polymeric foils. In order to increase the emission yield of the proton and carbon ions, the target thickness should be enhanced, but this choice reduces drastically the ion acceleration. The use of highly absorbing stuff, such as carbon nanotubes embedded inside a polymer, enhances the ion acceleration but results in a broad ion energy distribution and a low amount of the highly accelerated ion species.

  3. THE MORPHOLOGY AND STRUCTURE OF POLYETHYLENE TEREPHTHALATE SPHERULITES

    Institute of Scientific and Technical Information of China (English)

    LI Lisheng

    1984-01-01

    The morphology and structure of three types of normal and abnormal spherulites of polyethylene terephthalate cast from solution in dimethylphthalate were studied by polarizing microscopy,transmission electron microscopy and electron diffraction techniques. In the normal negative spherulites the [(2)10] * direction is parallel to the radius direction. In the normal positive spherulites the radius direction is parallel to the [(3)26] *. In the abnormal PETspherulites the Maltese cross extinction pattern in the polarizing microscope under crossed polars is oriented at 45 ° to the polars and there are concentric extinction rings around the center of the spherulite. Electron diffraction pattern indicates that [(2)12] * is parallel to the radius of the spherulite and this explains the observed extinction pattern in the abnormal spherulite.

  4. PHOTOINDUCED GRAFTING OF ACRYLIC AND ALLYL MONOMERS ON POLYETHYLENE SURFACE

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhenfeng; HU Xingzhou; YAN Qing

    1995-01-01

    Photoinduced grafting of acrylic and allyl monomers on polyethylene surface was generally studied by using benzophenone (BP) as a photoinitiator. The grafting process was carried out either in vapor-phase or in solution of the monomers. In the vapor-phase reaction with a filter used to cut off the short wavelength UV light, allyl amine is the most reactive of the four monomers used and acrylic amide is comparatively more reactive than acrylic acid and allyl alcohol. Acetone, as a solvent and carrier for initiator and monomers, however, shows its reactivity to participate the reaction. The solution grafting with a filter is much faster than the corresponding vapor-phase reaction, and a fully covered surface by the grafted polymer can be achieved in this way.

  5. Synthesis and characterization of polyethylene oxide based nano composite electrolyte

    Indian Academy of Sciences (India)

    M Malathi; K Tamilarasan

    2014-08-01

    Polyethylene oxide (PEO) – montmorillonite (MMT) composite electrolytes were synthesised by solution casting technique. The salt used for the study is Lithium perchlorate (LiClO4). The morphology and percentage of crystallinity data were obtained through X-ray Diffraction and Differential Scanning Caloriemetry. The ionic conductivity of the polymer electrolytes was studied by impedance spectroscopy. The addition of MMT resulted in an increase in conductivity over the temperature range of 25–60°C. The ionic conductivity of a composite polymer electrolyte containing 1.2 wt% MMT was 1 × 10-5 S cm−1 at 25°C, which is at least one order of magnitude higher than that of the polymer electrolyte (4 × 10-7S cm−1). The increase in ionic conductivity is explained on the basis of crystallinity of the polymer electrolyte.

  6. MARTINI Coarse-Grained Models of Polyethylene and Polypropylene.

    Science.gov (United States)

    Panizon, Emanuele; Bochicchio, Davide; Monticelli, Luca; Rossi, Giulia

    2015-06-25

    The understanding of the interaction of nanoplastics with living organisms is crucial both to assess the health hazards of degraded plastics and to design functional polymer nanoparticles with biomedical applications. In this paper, we develop two coarse-grained models of everyday use polymers, polyethylene (PE) and polypropylene (PP), aimed at the study of the interaction of hydrophobic plastics with lipid membranes. The models are compatible with the popular MARTINI force field for lipids, and they are developed using both structural and thermodynamic properties as targets in the parametrization. The models are then validated by showing their reliability at reproducing structural properties of the polymers, both linear and branched, in dilute conditions, in the melt, and in a PE-PP blend. PE and PP radius of gyration is correctly reproduced in all conditions, while PE-PP interactions in the blend are slightly overestimated. Partitioning of PP and PE oligomers in phosphatidylcholine membranes as obtained at CG level reproduces well atomistic data.

  7. Immobilization of bacteria in microgel grafted onto macroporous polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Trelles, J.A.; Quiroga, F.; Britos, C. [Dpto. de Ciencia y Tecnologia, Universidad Nacional de Quilmes, Roque Saenz Pena 352, (B1876BXD) Bernal, Buenos Aires (Argentina); Smolko, Eduardo E. [Comision Nacional de Energia Atomica, Buenos Aires (Argentina); Grasselli, Mariano, E-mail: mgrasse@unq.edu.a [Dpto. de Ciencia y Tecnologia, Universidad Nacional de Quilmes, Roque Saenz Pena 352, (B1876BXD) Bernal, Buenos Aires (Argentina)

    2010-03-15

    The development of 'Green Chemistry' requires new materials to replace the conventional organic chemistry by biological catalysts, to produce fine chemicals in an environmentally friendly manner. Microbial whole cells can be directly used as biocatalysts, providing a simple and cheap methodology since enzyme isolation and purification are avoided. High-density polyethylene (HDPE) is a very stable polymer though it can be activated by gamma radiation to induce grafting. Glycidyl methacrylate was grafted onto macroporous HDPE and PP in the range of 1-6%, proportional to the initial monomer concentration. Grafted polymers were further chemically modified with ethylenediamine to generate a cationic hydrogel of micron-size thickness onto the internal polymer surfaces. Modified polymers were able to immobilize Gram-positive and Gram-negative bacteria that can catalyze a chemical reaction as efficient as free cells do.

  8. Modeling cutinase enzyme regulation in polyethylene terepthalate plastic biodegradation

    Science.gov (United States)

    Apri, M.; Silmi, M.; Heryanto, T. E.; Moeis, M. R.

    2016-04-01

    PET (Polyethylene terephthalate) is a plastic material that is commonly used in our daily life. The high production of PET and others plastics that can be up to three hundred million tons per year, is not matched by its degradation rate and hence leads to environmental pollution. To overcome this problem, we develop a biodegradation system. This system utilizes LC Cutinase enzyme produced by engineered escherichia coli bacteria to degrade PET. To make the system works efficaciously, it is important to understand the mechanism underlying its enzyme regulation. Therefore, we construct a mathematical model to describe the regulation of LC Cutinase production. The stability of the model is analyzed. We show that the designated biodegradation system can give an oscillatory behavior that is very important to control the amount of inclusion body (the miss-folded proteins that reduce the efficiency of the biodegradation system).

  9. Scoping study. High density polyethylene (HDPE) in salstone service

    Energy Technology Data Exchange (ETDEWEB)

    Phifer, Mark A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2005-02-18

    An evaluation of the use of high density polyethylene (HDPE) geomembranes in Saltstone service has been conducted due to the potential benefits that could be derived from such usage. HDPE is one of the simplest hydrocarbon polymers and one of the most common polymers utilized in the production of geomembranes, which means that its costs are relatively low. Additionally, HDPE geomembranes have an extremely low permeability and an extremely low water vapor diffusional flux, which means that it is a good barrier to contaminant transport. The primary consideration in association with HDPE geomembranes in Saltstone service is the potential impact of Saltstone on the degradation of the HDPE geomembranes. Therefore, the evaluation documented herein has primarily focused upon the potential HDPE degradation in Saltstone service.

  10. Molecular Dynamics Simulations for Resolving Scaling Laws of Polyethylene Melts

    Directory of Open Access Journals (Sweden)

    Kazuaki Z. Takahashi

    2017-01-01

    Full Text Available Long-timescale molecular dynamics simulations were performed to estimate the actual physical nature of a united-atom model of polyethylene (PE. Several scaling laws for representative polymer properties are compared to theoretical predictions. Internal structure results indicate a clear departure from theoretical predictions that assume ideal chain statics. Chain motion deviates from predictions that assume ideal motion of short chains. With regard to linear viscoelasticity, the presence or absence of entanglements strongly affects the duration of the theoretical behavior. Overall, the results indicate that Gaussian statics and dynamics are not necessarily established for real atomistic models of PE. Moreover, the actual physical nature should be carefully considered when using atomistic models for applications that expect typical polymer behaviors.

  11. The alterations in high density polyethylene properties with gamma irradiation

    Science.gov (United States)

    Zaki, M. F.; Elshaer, Y. H.; Taha, Doaa. H.

    2017-10-01

    In the present investigation, high density polyethylene (HDPE) polymer has been used to study the alterations in its properties under gamma-irradiation. Physico-chemical properties have been investigated with different spectroscopy techniques, Fourier Transform Infrared spectroscopy (FTIR), X-ray diffraction (XRD), biocompatibility properties, as well as, mechanical properties change. The FT-IR analysis shows the formation of new band at 1716 cm-1 that is attributed to the oxidation of irradiated polymer chains, which is due to the formation of carbonyl groups (C˭O). XRD patterns show that a decrease in the crystallite size and increase in the Full Width at Half Maximum (FWHM). This means that the crystallinity of irradiated samples is decreased with increase in gamma dose. The contact angle measurements show an increase in the surface free energy as the gamma irradiation increases. The measurements of mechanical properties of irradiated HDPE samples were discussed.

  12. Hydrophobic composition based on mixed-molecular weight polyethylene

    Science.gov (United States)

    Gorlenko, Nikolay; Debelova, Natalya; Sarkisov, Yuriy; Volokitin, Gennadiy; Zavyalova, Elena; Lapova, Tatyana

    2016-01-01

    The paper presents investigations of compositions based on low and high molecular weight polyethylene so as to synthesize a hydrophobic composition for moisture protection of timber. X-ray phase analysis and measurements of the tear-off force of hydrophobic coating needed to apply to the timber surface and the limiting wetting angle are carried out to detect the hydrophobic, adhesive, electrophysical, and physicochemical properties of compositions. Kinetic dependencies are given for moisture absorption of timber specimens. It is shown that the preliminary formation of the texture by the surface patterning or its treatment with low-temperature plasma with the following protective coating results in the improvement of hydrophobic properties of the suggested compositions. These compositions can be used in the capacity of water repellents to protect building materials from moisture including restoration works.

  13. Immobilization of bacteria in microgel grafted onto macroporous polyethylene

    Science.gov (United States)

    Trelles, J. A.; Quiroga, F.; Britos, C.; Smolko, Eduardo E.; Grasselli, Mariano

    2010-03-01

    The development of " Green Chemistry" requires new materials to replace the conventional organic chemistry by biological catalysts, to produce fine chemicals in an environmentally friendly manner. Microbial whole cells can be directly used as biocatalysts, providing a simple and cheap methodology since enzyme isolation and purification are avoided. High-density polyethylene (HDPE) is a very stable polymer though it can be activated by gamma radiation to induce grafting. Glycidyl methacrylate was grafted onto macroporous HDPE and PP in the range of 1-6%, proportional to the initial monomer concentration. Grafted polymers were further chemically modified with ethylenediamine to generate a cationic hydrogel of micron-size thickness onto the internal polymer surfaces. Modified polymers were able to immobilize Gram-positive and Gram-negative bacteria that can catalyze a chemical reaction as efficient as free cells do.

  14. Deformation mechanism in swollen radiation-grafted polyethylene

    Science.gov (United States)

    Ungar, G.; Dlugosz, J.; Ranogajec, F.

    Stress-strain behaviour of anisotropic polyethylene (PE) film radiation-grafted with styrene was studied with the samples immersed in xylene. The glassy polystyrene (PS) phase (1) is softened by swelling. Whereas the tensile modulus of dry graft increases somewhat with increasing PS content, for the swollen graft it decreases sharply. However the yield stress and the elongation at break remain fairly large. For highly grafted films (PS/PE > 1) deformation is almost fully reversible and proceeds without necking up to draw ratios as high as 5:1. With the aid of additional X-ray diffraction and transmission electron microscopy results the deformation mechanism is interpreted in terms of the known morphology of the copolymer.

  15. Invertase immobilization onto radiation-induced graft copolymerized polyethylene pellets

    Science.gov (United States)

    de Queiroz, Alvaro Antonio Alencar; Vitolo, Michele; de Oliveira, Rômulo Cesar; Higa, Olga Zazuco

    1996-06-01

    The graft copolymer poly(ethylene-g-acrylic acid) (LDPE-g-AA) was prepared by radiation-induced graft copolymerization of acrylic acid onto low density polyethylene (LDPE) pellets, and characterized by infrared photoacoustic spectroscopy and scanning electron microscopy (SEM). The presence of the grafted poly(acrylic acid) (PAA) was established. Invertase was immobilized onto the graft polymer and the thermodynamic parameters of the soluble and immobilized enzyme were determined. The Michaelis constant, Km, and the maximum reaction velocity, Vmax, were determined for the free and the immobilized invertase. The Michaelis constant, Km was larger for the immobilized invertase than for the free enzyme, whereas Vmax was smaller for the immobilized invertase. The thermal stability of the immobilized invertase was higher than that of the free enzyme.

  16. Deformation mechanism in swollen radiation-grafted polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Ungar, G.; Ranogajec, F. (Institut Rudjer Boskovic, Zagreb (Yugoslavia)); Dlugosz, J. (Bristol Univ. (UK). H.H. Wills Physics Lab.)

    1981-01-01

    Stress-strain behaviour of anisotropic polyethylene (PE) film radiation-grafted with styrene was studied with the samples immersed in xylene. The glassy polystyrene (PS) phase is softened by swelling. Whereas the tensile modulus of dry graft increases somewhat with increasing PS content, for the swollen graft it decreases sharply. However the yield stress and the elongation at break remain fairly large. For highly grafted films (PS/PE > 1) deformation is almost fully reversible and proceeds without necking up to draw ratios as high as 5:1. With the aid of additional X-ray diffraction and transmission electron microscopy results the deformation mechanism is interpreted in terms of the known morphology of the copolymer.

  17. Reliability-based assessment of polyethylene pipe creep lifetime

    Energy Technology Data Exchange (ETDEWEB)

    Khelif, Rabia [LaMI-UBP and IFMA, Campus de Clermont-Fd, Les Cezeaux, BP 265, 63175 Aubiere Cedex (France); LR3MI, Departement de Genie Mecanique, Universite Badji Mokhtar, BP 12, Annaba 23000 (Algeria)], E-mail: rabia.khelif@ifma.fr; Chateauneuf, Alaa [LGC-University Blaise Pascal, Campus des Cezeaux, BP 206, 63174 Aubiere Cedex (France)], E-mail: alaa.chateauneuf@polytech.univ-bpclermont.fr; Chaoui, Kamel [LR3MI, Departement de Genie Mecanique, Universite Badji Mokhtar, BP 12, Annaba 23000 (Algeria)], E-mail: chaoui@univ-annaba.org

    2007-12-15

    Lifetime management of underground pipelines is mandatory for safe hydrocarbon transmission and distribution systems. The use of high-density polyethylene tubes subjected to internal pressure, external loading and environmental variations requires a reliability study in order to define the service limits and the optimal operating conditions. In service, the time-dependent phenomena, especially creep, take place during the pipe lifetime, leading to significant strength reduction. In this work, the reliability-based assessment of pipe lifetime models is carried out, in order to propose a probabilistic methodology for lifetime model selection and to determine the pipe safety levels as well as the most important parameters for pipeline reliability. This study is enhanced by parametric analysis on pipe configuration, gas pressure and operating temperature.

  18. Prediction of Wear in Crosslinked Polyethylene Unicompartmental Knee Arthroplasty

    Directory of Open Access Journals (Sweden)

    Jonathan Netter

    2015-05-01

    Full Text Available Wear-related complications remain a major issue after unicompartmental arthroplasty. We used a computational model to predict knee wear generated in vitro under diverse conditions. Inverse finite element analysis of 2 different total knee arthroplasty designs was used to determine wear factors of standard and highly crosslinked polyethylene by matching predicted wear rates to measured wear rates. The computed wear factor was used to predict wear in unicompartmental components. The articular surface design and kinematic conditions of the unicompartmental and tricompartmental designs were different. Predicted wear rate (1.77 mg/million cycles was very close to experimental wear rate (1.84 mg/million cycles after testing in an AMTI knee wear simulator. Finite element analysis can predict experimental wear and may reduce the cost and time of preclinical testing.

  19. Hansen solubility parameters for polyethylene glycols by inverse gas chromatography.

    Science.gov (United States)

    Adamska, Katarzyna; Voelkel, Adam

    2006-11-03

    Inverse gas chromatography (IGC) has been applied to determine solubility parameter and its components for nonionic surfactants--polyethylene glycols (PEG) of different molecular weight. Flory-Huggins interaction parameter (chi) and solubility parameter (delta(2)) were calculated according to DiPaola-Baranyi and Guillet method from experimentally collected retention data for the series of carefully selected test solutes. The Hansen's three-dimensional solubility parameters concept was applied to determine components (delta(d), delta(p), delta(h)) of corrected solubility parameter (delta(T)). The molecular weight and temperature of measurement influence the solubility parameter data, estimated from the slope, intercept and total solubility parameter. The solubility parameters calculated from the intercept are lower than those calculated from the slope. Temperature and structural dependences of the entopic factor (chi(S)) are presented and discussed.

  20. Methanolysis of Poly(ethylene terephthalate) in Supercritical Phase

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The depolymerization of poly(ethylene terephthalate, PET) in supercritical methanol is studied using a stainless stirred autoclave at temperature of 255~260℃, pressure of 8.5~14.0 MPa, and methanol/PET weight ratio of 3~8. Under the optimal conditions, the PET is depolymerized completely to its monomers in 60 min. The main products of the reaction are dimethyl terephthalate and ethylene glycol. There are still some small amounts of byproducts, such as methyl-(2-hydroxyethyl) terephthalate, bis(hydroxyethyl) terephthalate, dimers and oligomers. Reversed-phase high performance liquid chrom- atography and gas chromatography are used to analyze solid products and liquid products respectively. The results of depolymerization show that the yield of dimethyl terephthalate and the degree of PET depolymerization are dependent on the reaction temperature, weight ratio of methanol to PET and reaction time. But the reaction pressure has little influence on the depolymerization as long as methanol is in supercritical state.

  1. Synthesis of Propargyl-Terminated Heterobifunctional Poly(ethylene glycol

    Directory of Open Access Journals (Sweden)

    Wen Zhong

    2010-10-01

    Full Text Available Novel propargyl-ended heterobifunctional poly(ethylene glycol (PEG derivatives with hydroxyl, carboxyl, mercapto or hydrazide end groups were synthesized with simplicity yet high efficiency. PEG (Mw = 3500 Da with an α-hydroxyl group and an ω-carboxyl was used as the starting polymer. The carboxyl group of the bifunctional PEG was modified into a propargyl, then carboxyl, mercapto or hydrazide groups were introduced to the other end of the bifunctional PEG by modifying the bifunctional PEG’s hydroxyl group with succinic anhydride, cysteamide or tert-butyl carbazate, respectively. This method can be useful to the development of PEG-based bioconjugates for a variety of biomedical applications.

  2. Progress in Bimodal Polyethylene Produced by Metallocene Catalyst

    Institute of Scientific and Technical Information of China (English)

    FENG; YuTao

    2001-01-01

    The external new ways, kinds and recant advances of bimodal Polyethylene produced by metallocene catalyst were reviewed. For example, U.S.Pat.No 4939217 discloses an olefin polymerization supported catalyst comprising at least two different metallocenes each having different olefin polymerization termination rate constants in the presence of hydrogen. U.S.Pat. No.5077255 discloses an olefin polymerization supported catalyst comprising at least one metallocene of a metal, a non-metallocene transition metal and an alumoxane. The supported product is highly useful for the polymerization of olefins especially ethylene and especially for the copolymerization of ethylene and other mono and diolefins. U.S.Pat.No.5986024 discloses a process is provided for preparing polymer compositions which are multimodal in nature. The process involves contacting, under polymerization conditions, a selected addition polymerizable monomer with a metallocene catalyst having two or more distinct and chemically different active sites, and a catalyst activator.  ……

  3. Diffusivities and Viscosities of Poly(ethylene oxide) Oligomers †

    KAUST Repository

    Hong, Bingbing

    2010-10-14

    Diffusivities and viscosities of poly(ethylene oxide) (PEO) oligomer melts with 1 to 12 repeat units have been obtained from equilibrium molecular dynamics simulations using the TraPPE-UA force field. The simulations generated diffusion coefficients with high accuracy for all of the molar masses studied, but the statistical uncertainties in the viscosity calculations were significantly larger for longer chains. There is good agreement of the calculated viscosities and densities with available experimental data, and thus, the simulations can be used to bridge gaps in the data and for extrapolations with respect to chain length, temperature, and pressure. We explored the convergence characteristics of the Green-Kubo formulas for different chain lengths and propose minimal production times required for convergence of the transport properties. The chain-length dependence of the transport properties suggests that neither Rouse nor reptation models are applicable in the short-chain regime investigated. © 2010 American Chemical Society.

  4. Modeling Low Density Polyethylene with Precisely Placed Butyl Branches

    Science.gov (United States)

    Rojas, Giovanni; Wagener, Kenneth B.

    Polyethylene (PE) is a commodity produced on a massive scale and also is one of the most studied macromolecules. Crystallinity can be controlled by copolymerizing ethylene with α-olefins, producing a wide range of material responses. Physical properties of PE, obtained via α olefin copolymerization, depend on the branch content that is directly related to the comonomer incorporation into the PE backbone. Materials with unknown primary structures are produced via chaingrowth chemistry, because unwanted side reactions generate defects in the main backbone that alter the morphological behavior and thermal response. Acyclic diene metathesis (ADMET) polymerization/hydrogenation methodology produce perfect sequenced copolymers of ethylene with α-olefins. Synthesis and thermal properties of PE with butyl branches precisely placed along the polymer backbone using ADMET chemistry is described within.

  5. Giant Thermal Rectification from Polyethylene Nanofiber Thermal Diodes

    CERN Document Server

    Zhang, Teng

    2015-01-01

    The realization of phononic computing is held hostage by the lack of high performance thermal devices. Here we show through theoretical analysis and molecular dynamics simulations that unprecedented thermal rectification factors (as large as 1.20) can be achieved utilizing the phase dependent thermal conductivity of polyethylene nanofibers. More importantly, such high thermal rectifications only need very small temperature differences (< 20 oC) across the device, which is a significant advantage over other thermal diodes which need temperature biases on the order of the operating temperature. Taking this into consideration, we show that the dimensionless temperature-scaled rectification factors of the polymer nanofiber diodes range from 12 to 25 - much larger than other thermal diodes (< 8). The polymer nanofiber thermal diode consists of a crystalline portion whose thermal conductivity is highly phase-sensitive and a cross-linked portion which has a stable phase. Nanoscale size effect can be utilized t...

  6. A new route for chitosan immobilization onto polyethylene surface.

    Science.gov (United States)

    Popelka, Anton; Novák, Igor; Lehocký, Marián; Junkar, Ita; Mozetič, Miran; Kleinová, Angela; Janigová, Ivica; Slouf, Miroslav; Bílek, František; Chodák, Ivan

    2012-11-06

    Low-density polyethylene (LDPE) belongs to commodity polymer materials applied in biomedical applications due to its favorable mechanical and chemical properties. The main disadvantage of LDPE in biomedical applications is low resistance to bacterial infections. An antibacterial modification of LDPE appears to be a solution to this problem. In this paper, the chitosan and chitosan/pectin multilayer was immobilized via polyacrylic acid (PAA) brushes grafted on the LDPE surface. The grafting was initiated by a low-temperature plasma treatment of the LDPE surface. Surface and adhesive properties of the samples prepared were investigated by surface analysis techniques. An antibacterial effect was confirmed by inhibition zone measurements of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The chitosan treatment of LDPE led to the highest and most clear inhibition zones (35 mm(2) for E. coli and 275 mm(2) for S. aureus). Copyright © 2012 Elsevier Ltd. All rights reserved.

  7. Progress in Bimodal Polyethylene Produced by Metallocene Catalyst

    Institute of Scientific and Technical Information of China (English)

    FENG YuTao

    2001-01-01

    @@ The external new ways, kinds and recant advances of bimodal Polyethylene produced by metallocene catalyst were reviewed. For example, U.S.Pat.No 4939217 discloses an olefin polymerization supported catalyst comprising at least two different metallocenes each having different olefin polymerization termination rate constants in the presence of hydrogen. U.S.Pat. No.5077255 discloses an olefin polymerization supported catalyst comprising at least one metallocene of a metal, a non-metallocene transition metal and an alumoxane. The supported product is highly useful for the polymerization of olefins especially ethylene and especially for the copolymerization of ethylene and other mono and diolefins. U.S.Pat.No.5986024 discloses a process is provided for preparing polymer compositions which are multimodal in nature. The process involves contacting, under polymerization conditions, a selected addition polymerizable monomer with a metallocene catalyst having two or more distinct and chemically different active sites, and a catalyst activator.

  8. Textural changes in metallurgical coke prepared with polyethylene

    Institute of Scientific and Technical Information of China (English)

    Stanislav S.Gornostayev; Jyrki J.Heino; Tommi M.T.Kokkonen; Hannu T.Makkonen; Satu M.M.Huttunen; Timo M.J.Fabritius

    2014-01-01

    The effect of high-density polyethylene (HDPE) on the textural features of experimental coke was investigated using polar-ized-light optical microscopy and wavelet-based image analysis. Metallurgical coke samples were prepared in a laboratory-scale furnace with 2.5%, 5.0%, 7.5%, 10.0%, and 12.5%HDPE by mass, and one sample was prepared by 100%coal. The amounts and distribution of textures (isotropic, mosaic and banded) and pores were obtained. The calculations reveal that the addition of HDPE results in a decrease of mosaic texture and an increase of isotropic texture. Ethylene formed from the decomposition of HDPE is considered as a probable reason for the texture modifications. The approach used in this study can be applied to indirect evaluation for the reactivity and strength of coke.

  9. Surface Modification of Polyethylene by Heparin for Improvement of Antithrombogenicity

    Institute of Scientific and Technical Information of China (English)

    ZHAO Guowei; CHEN Yashao; DONG Tao; WANG Xiaoli

    2007-01-01

    The purpose of this paper was to enhance blood compatibility of polyethylene (PE)film.PE film pretreated by argon plasma was subjected to ultraviolet (UV) -induced graft polymerization with Acrylic acid(AAc) (AAc-grafted PE films,PE-g-PAAc) without photo-initiator,then heparin was covalently immobilized on the PE surface (PE-g-HPAAc).The surface properties and microstructure of PE-g-PAAc and PE-g-HPAAc were studied by static contact angle measurement,atomic force microscope (AFM),X-ray photoelectron spectroscopy (XPS) and Attenuated total reflectance Fourier transfer infrared spectroscopy (ATR-FTIR).It was confirmed that AAc and heparin were successfully immobilized onto the surface of PE film.Results of platelet adhesion experiments indicated that the antithrombogenicity of the modified PE film was remarkably improved.

  10. Isothermal Crystallization Kinetics of Microencapsulated Polyethylene Glycol Particles

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The microencapsulated polyethylene glycol (PEG)with different molecular weight by a fluidized coating method has been prepared and the crystallization behaviors of PEG particles in three-dimensional confined volume were investigated by using differential scanning calorimetry(DSC) measurement.The results showed that the width of the crystallization peak of PEG increases and its height gradually diminishes in case that the PEG particles are microencapsulated. Compared with the non-microencapsulated PEG particles, the proportion of the first crystallization peak of microencapsulated PEG particle increases, and that of the second one decreases. The reason for the difference maybe is that the crystallization process of microencapsulated PEG particles is uniform and the crystallization ends when the spherulites touch the wall,thus the opportunity of producing the second crystallization peak was relatively reduced.

  11. Utilization of polyethylene terephthalate (PET) in asphalt pavement: A review

    Science.gov (United States)

    Ahmad, A. F.; Razali, A. R.; Razelan, I. S. M.

    2017-05-01

    The quantity of plastics used throughout the world is increasing every year. Municipal solid wastes (MSW), manufacturing processes and service industries produce a lot of waste plastic materials. The increasing awareness among consumers about the environment has contributed to the concerns over disposal of generated wastes. The growing number of plastic materials every year and limited landfill conditions causes many alternatives exist for the disposal of plastic waste. This paper provides a summary of the study on the utilization of polyethylene terephthalate (PET) in road construction. Data from researcher show that PET can improve some properties of modified asphalt mixture. Having considered the economic and environmental prudent angles, utilization of PET as an additive to asphalt mixture is suitable to be used for road pavement.

  12. The role of isolated polyethylene exchange in total knee arthroplasty

    Science.gov (United States)

    Pang, Hee-Nee; Bin Abd Razak, Hamid Rahmatullah; Petis, Stephen; Naudie, Douglas D. R.; MacDonald, Steven J.

    2017-01-01

    The use of modular total knee arthroplasty (TKA) implants allows surgeons to perform isolated tibial polyethylene insert exchange (IPE) while retaining well-fixed and stable components. The purported advantages of IPE include preservation of bone stock, shorter operating time, less blood loss, faster rehabilitation and lower cost. However, the indications for IPE are limited. IPE for wear and osteolysis has moderate success in the medium term but should be avoided in cases of accelerated wear. In selected cases, debridement and IPE for early infection can result in low morbidity with high success rates in the short term. IPE for arthrofibrosis has poor results. IPE should be undertaken with caution and an institutional algorithm should be followed. Cite this article: EFORT Open Rev 2017;2:66–71 DOI: 10.1302/2058-5241.2.160049 PMID:28507777

  13. Production and characterization of polyethylene/organoclay oriented fiber

    Science.gov (United States)

    Coppola, B.; Di Maio, L.; Scarfato, P.; Incarnato, L.

    2016-05-01

    The aim of this work was to study the influence of drawing process on the mechanical properties of polyethylene/clay fibers. To this extent, three different PE/clay blends (3, 5 and 10 wt.%) were prepared by melt compounding in a twin-screw extruder. The investigated clay was a commercial organically modified montmorillonite (Dellite 67G). After compounding fibers were produced by a single-screw extruder and drawn at different draw ratios. At increasing draw ratio an increase of elastic modulus and tensile strength was attained. The presence of clay layers increases fibers ductility hindering fibrils formation during the drawing process. Moreover, at increasing clay contents a decrease of tensile strength for high draw ratios was observed. These results demonstrated that the dispersed clay layers can be re-aggregated by the uniaxial flow induced by the drawing process resulting in a decay of mechanical properties at high draw ratios.

  14. Radiative human body cooling by nanoporous polyethylene textile

    Science.gov (United States)

    Hsu, Po-Chun; Song, Alex Y.; Catrysse, Peter B.; Liu, Chong; Peng, Yucan; Xie, Jin; Fan, Shanhui; Cui, Yi

    2016-09-01

    Thermal management through personal heating and cooling is a strategy by which to expand indoor temperature setpoint range for large energy saving. We show that nanoporous polyethylene (nanoPE) is transparent to mid-infrared human body radiation but opaque to visible light because of the pore size distribution (50 to 1000 nanometers). We processed the material to develop a textile that promotes effective radiative cooling while still having sufficient air permeability, water-wicking rate, and mechanical strength for wearability. We developed a device to simulate skin temperature that shows temperatures 2.7° and 2.0°C lower when covered with nanoPE cloth and with processed nanoPE cloth, respectively, than when covered with cotton. Our processed nanoPE is an effective and scalable textile for personal thermal management.

  15. Hybrid estimation technique for predicting butene concentration in polyethylene reactor

    Science.gov (United States)

    Mohd Ali, Jarinah; Hussain, M. A.

    2016-03-01

    A component of artificial intelligence (AI), which is fuzzy logic, is combined with the so-called conventional sliding mode observer (SMO) to establish a hybrid type estimator to predict the butene concentration in the polyethylene production reactor. Butene or co-monomer concentration is another significant parameter in the polymerization process since it will affect the molecular weight distribution of the polymer produced. The hybrid estimator offers straightforward formulation of SMO and its combination with the fuzzy logic rules. The error resulted from the SMO estimation will be manipulated using the fuzzy rules to enhance the performance, thus improved on the convergence rate. This hybrid estimation is able to estimate the butene concentration satisfactorily despite the present of noise in the process.

  16. Modeling cutinase enzyme regulation in polyethylene terepthalate plastic biodegradation

    Energy Technology Data Exchange (ETDEWEB)

    Apri, M., E-mail: m.apri@math.itb.ac.id; Silmi, M. [Department of Mathematics, Institut Teknologi Bandung, Jalan Ganeca 10 Bandung, 40132 (Indonesia); Heryanto, T. E.; Moeis, M. R. [School of Life Sciences and Technology, Institut Teknologi Bandung, Jalan Ganeca 10 Bandung, 40132 (Indonesia)

    2016-04-06

    PET (Polyethylene terephthalate) is a plastic material that is commonly used in our daily life. The high production of PET and others plastics that can be up to three hundred million tons per year, is not matched by its degradation rate and hence leads to environmental pollution. To overcome this problem, we develop a biodegradation system. This system utilizes LC Cutinase enzyme produced by engineered escherichia coli bacteria to degrade PET. To make the system works efficaciously, it is important to understand the mechanism underlying its enzyme regulation. Therefore, we construct a mathematical model to describe the regulation of LC Cutinase production. The stability of the model is analyzed. We show that the designated biodegradation system can give an oscillatory behavior that is very important to control the amount of inclusion body (the miss-folded proteins that reduce the efficiency of the biodegradation system).

  17. A bacterium that degrades and assimilates poly(ethylene terephthalate).

    Science.gov (United States)

    Yoshida, Shosuke; Hiraga, Kazumi; Takehana, Toshihiko; Taniguchi, Ikuo; Yamaji, Hironao; Maeda, Yasuhito; Toyohara, Kiyotsuna; Miyamoto, Kenji; Kimura, Yoshiharu; Oda, Kohei

    2016-03-11

    Poly(ethylene terephthalate) (PET) is used extensively worldwide in plastic products, and its accumulation in the environment has become a global concern. Because the ability to enzymatically degrade PET has been thought to be limited to a few fungal species, biodegradation is not yet a viable remediation or recycling strategy. By screening natural microbial communities exposed to PET in the environment, we isolated a novel bacterium, Ideonella sakaiensis 201-F6, that is able to use PET as its major energy and carbon source. When grown on PET, this strain produces two enzymes capable of hydrolyzing PET and the reaction intermediate, mono(2-hydroxyethyl) terephthalic acid. Both enzymes are required to enzymatically convert PET efficiently into its two environmentally benign monomers, terephthalic acid and ethylene glycol. Copyright © 2016, American Association for the Advancement of Science.

  18. Electron beam induced modification of poly(ethylene terephthalate) films

    Energy Technology Data Exchange (ETDEWEB)

    Vasiljeva, I.V. [Technology Center RADIANT, 10, Kurchatova Str., 194223 St. Petersburg (Russian Federation)]. E-mail: radiant@skylink.spb.ru; Mjakin, S.V. [Technology Center RADIANT, 10, Kurchatova Str., 194223 St. Petersburg (Russian Federation); Makarov, A.V. [St.-Petersburg State University of Cinema and Television, 13, ul. Pravdy, 191126 St. Petersburg (Russian Federation); Krasovsky, A.N. [St.-Petersburg State University of Cinema and Television, 13, ul. Pravdy, 191126 St. Petersburg (Russian Federation); Varlamov, A.V. [St.-Petersburg State University of Cinema and Television, 13, ul. Pravdy, 191126 St. Petersburg (Russian Federation)

    2006-10-15

    Electron beam processing of poly(ethylene terephthalate) (PET) films is found to promote significant changes in the melting heat, intrinsic viscosity and polymer film-liquid (water, isooctane and toluene) boundary surface tension. These properties are featured with several maximums depending on the absorbed dose and correlating with the modification of PET surface functionality. Studies using adsorption of acid-base indicators and IR-spectroscopy revealed that the increase of PET surface hydrophilicity is determined by the oxidation of methylene and methyne groups. Electron beam treatment of PET films on the surface of N-vinylpyrrolidone aqueous solution provided graft copolymerization with this comonomer at optimum process parameters (energy 700 keV, current 1 mA, absorbed dose 50 kGy)

  19. Photothermal characterization of low density polyethylene food packages

    Directory of Open Access Journals (Sweden)

    Poley Luiz H.

    2004-01-01

    Full Text Available The present work discuss the applicability of photothermal techniques for determining diffusion coefficients of oxygen and carbon dioxide of commercial low-density polyethylene (LDPE. The methodology involves the monitoring of diffused gas by a photoacoustic analyzer. Diffusion coefficients measured for CO2 and O2 were 2.77 x 10-8 cm²/s and 1.68 x 10-7 cm²/s, respectively. To support the gas diffusion results, thermal properties were studied using photoacoustic spectroscopy and crystallinity was determined using X-ray diffraction. Values obtained for thermal diffusivity and specific heat capacity were 1.65 x 10-3cm²/s and 2.33 J.cm-3K-1, which are in good agreement with values available in the literature for pure LDPE and thus assure reliability of diffusion coefficients values.

  20. Controlled Emissivity Coatings to Delay Ignition of Polyethylene.

    Science.gov (United States)

    Sonnier, Rodolphe; Ferry, Laurent; Gallard, Benjamin; Boudenne, Abderrahim; Lavaud, François

    2015-10-12

    Semi-opaque to opaque films containing small amounts of various aluminium particles to decrease emissivity were easily prepared and coated onto low-density polyethylene (LDPE) sheets. The thermal-radiative properties (reflectivity, transmissivity and absorptivity) of the films were measured and related to the aluminum particles' content, size and nature. Time-to-ignition of samples was assessed using a cone calorimeter at different heat flux values (35, 50 and 75 kW/m²). The coatings allowed significant ignition delay and, in some cases, changed the material behaviour from thermally thin to thick behaviour. These effects are related both to their emissivity and transmissivity. A lower emissivity, which decreases during the degradation, and a lower transmissivity are the key points to ensure an optimal reaction-to-fire.

  1. Controlled Emissivity Coatings to Delay Ignition of Polyethylene

    Directory of Open Access Journals (Sweden)

    Rodolphe Sonnier

    2015-10-01

    Full Text Available Semi-opaque to opaque films containing small amounts of various aluminium particles to decrease emissivity were easily prepared and coated onto low-density polyethylene (LDPE sheets. The thermal-radiative properties (reflectivity, transmissivity and absorptivity of the films were measured and related to the aluminum particles’ content, size and nature. Time-to-ignition of samples was assessed using a cone calorimeter at different heat flux values (35, 50 and 75 kW/m2. The coatings allowed significant ignition delay and, in some cases, changed the material behaviour from thermally thin to thick behaviour. These effects are related both to their emissivity and transmissivity. A lower emissivity, which decreases during the degradation, and a lower transmissivity are the key points to ensure an optimal reaction-to-fire.

  2. Thermolysis of High-Density Polyethylene to Petroleum Products

    Directory of Open Access Journals (Sweden)

    Sachin Kumar

    2013-01-01

    Full Text Available Thermal degradation of plastic polymers is becoming an increasingly important method for the conversion of plastic materials into valuable chemicals and oil products. In this work, virgin high-density polyethylene (HDPE was chosen as a material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse virgin HDPE with an objective to optimize the liquid product yield at a temperature range of 400°C to 550°C. The chemical analysis of the HDPE pyrolytic oil showed the presence of functional groups such as alkanes, alkenes, alcohols, ethers, carboxylic acids, esters, and phenyl ring substitution bands. The composition of the pyrolytic oil was analyzed using GC-MS, and it was found that the main constituents were n-Octadecane, n-Heptadecane, 1-Pentadecene, Octadecane, Pentadecane, and 1-Nonadecene. The physical properties of the obtained pyrolytic oil were close to those of mixture of petroleum products.

  3. Supercritical CO2 impregnation of polyethylene components for medical purposes

    Directory of Open Access Journals (Sweden)

    Gamse Thomas

    2007-01-01

    Full Text Available Modem hip and knee endoprosthesis are produced in titanium and to reduce the friction at the contact area polymer parts, mainly ultra-high molecular weight polyethylene (UHMW-PE, are installed. The polyethylene is impregnated with a-tocopherol (vitamin E before processing for remarkable decrease of oxidative degradation. Cross linked UHMW-PE offers much higher stability, but a-tocopherol cannot be added before processing, because a-tocopherol hinders the cross linking process accompanied by a heavy degradation of the vitamin. The impregnation of UHMW-PE with a-tocopherol has to be performed after the cross linking process and an accurate concentration has to be achieved over the cross section of the whole material. In the first tests UHMW-PE-cubes were stored in pure a-tocopherol under inert atmosphere at temperatures from 100 to 150 °C resulting in a high mass fraction of a-tocopherol in the edge zones and no constant concentration over the cross section. For better distribution and for regulating the mass fraction of a-tocopherol in the cross linked UHMW-PE material supercritical CO2 impregnation tests were investigated. Again UHMW-PE-cubes were impregnated in an autoclave with a-tocopherol dissolved in supercritical CO2 at different pressures and temperatures with variable impregnation times and vitamin E concentrations. Based on the excellent results of supercritical CO2 impregnation standard hip and knee cups were stabilized nearly homogeneously with varying mass fraction of a-tocopherol.

  4. Fabrication of poly(ethylene glycol) hydrogel microstructures using photolithography

    Science.gov (United States)

    Revzin, A.; Russell, R. J.; Yadavalli, V. K.; Koh, W. G.; Deister, C.; Hile, D. D.; Mellott, M. B.; Pishko, M. V.

    2001-01-01

    The fabrication of hydrogel microstructures based upon poly(ethylene glycol) diacrylates, dimethacrylates, and tetraacrylates patterned photolithographically on silicon or glass substrates is described. A silicon/silicon dioxide surface was treated with 3-(trichlorosilyl)propyl methacrylate to form a self-assembled monolayer (SAM) with pendant acrylate groups. The SAM presence on the surface was verified using ellipsometry and time-of-flight secondary ion mass spectrometry. A solution containing an acrylated or methacrylated poly(ethylene glycol) derivative and a photoinitiator (2,2-dimethoxy-2-phenylacetophenone) was spin-coated onto the treated substrate, exposed to 365 nm ultraviolet light through a photomask, and developed with either toluene, water, or supercritical CO2. As a result of this process, three-dimensional, cross-linked PEG hydrogel microstructures were immobilized on the surface. Diameters of cylindrical array members were varied from 600 to 7 micrometers by the use of different photomasks, while height varied from 3 to 12 micrometers, depending on the molecular weight of the PEG macromer. In the case of 7 micrometers diameter elements, as many as 400 elements were reproducibly generated in a 1 mm2 square pattern. The resultant hydrogel patterns were hydrated for as long as 3 weeks without delamination from the substrate. In addition, micropatterning of different molecular weights of PEG was demonstrated. Arrays of hydrogel disks containing an immobilized protein conjugated to a pH sensitive fluorophore were also prepared. The pH sensitivity of the gel-immobilized dye was similar to that in an aqueous buffer, and no leaching of the dye-labeled protein from the hydrogel microstructure was observed over a 1 week period. Changes in fluorescence were also observed for immobilized fluorophore labeled acetylcholine esterase upon the addition of acetyl acholine.

  5. Influence of polyethylene glycol-300 addition on nanostructured lead sulfide thin films properties

    Science.gov (United States)

    Kaci, S.; Keffous, A.; Trari, M.; Menari, H.; Manseri, A.; Mahmoudi, B.; Guerbous, L.

    2010-09-01

    The concentration of polyethylene glycol-300 was found to play a crucial role in the formation of nanoparticles in PbS-chemical bath deposition process. We report here an endeavor to set up a relation between the variation of lead sulfide (PbS) nanocrystalline thin film properties, grown by (CBD) process at room temperature on corning glass and Si(100) substrates, with amount fluctuations of polyethylene glycol-300 in the solution. The transmittance of the films, for a fixed reaction time, increased up to ˜ 80% with the increase of % polyethylene glycol-300 in the solution, indicating the formation of very thin films due to the decrease of reaction rate with the increase of the concentration of polyethylene glycol-300. The optical band gaps were found to strongly rely on the composition of the bath deposition and increase with the increase of the polyethylene glycol-300 amount in the solution. Particle sizes between 2.8 and 8.7 nm were obtained by varying the % of polyethylene glycol-300 from 0.2 to 1.5. The concentration of polyethylene glycol-300 not only affects the reaction rate but also the morphology of the obtained films. PbS nanoparticles were found to be oriented preferentially along the plane. The absorption shifts towards short wavelength indicating a blue-shifting as a consequence of quantum confinement.

  6. Preparation of polyethylene sacks for collection of precipitation samples for chemical analysis

    Science.gov (United States)

    Schroder, L.J.; Bricker, A.W.

    1985-01-01

    Polyethylene sacks are used to collect precipitation samples. Washing polyethylene with acetone, hexane, methanol, or nitric acid can change the adsorptive characteristics of the polyethylene. In this study, simulated precipitation at pH 4.5 was in contact with the polyethylene sacks for 21 days; subsamples were removed for chemical analysis at 7, 14, and 21 days after intitial contact. Sacks washed with acetone adsorbed iron and lithium; sacks washed with hexane adsorbed barium, iron , and lithium; sacks washed with methanol adsorbed calcium and iron; and sacks washed with 0.30 N nitric acid adsorbed iron. Leaching the plastic sacks with 0.15 N nitric acid did not result in 100-percent recovery of any of the adsorbed metals. Washing polyethylene sacks with dilute nitric acid caused the pH of the simulated precipitation to be decreased by 0.2 pH unit after 1 week of contact with the polyethylene. The specific conductance increased by 10 microsiemens per centimeter. Contamination of precipitation samples by lead was determined to be about 0.1 microgram per liter from contact with precleaned polyethylene sacks. No measurable contamination of precipitation samples by zinc occurred. (USGS)

  7. Colored polyethylene soil covers and grafting effects on cucumber flowering and yield

    Directory of Open Access Journals (Sweden)

    Fonseca Inês Cristina de Batista

    2003-01-01

    Full Text Available Cucumber (Cucumis sativus L. is one of the most cultivated vegetable crops in plastic greenhouses in Brazil because of the short cycle and its high economic value in off-season harvests. To better understand this management technique the effect of different colored polyethylene soil covers was evaluated in relation to flowering and yield of the hybrid cucumber 'Yoshinari' grafted or not on the hybrid squash 'Ikky'. The polyethylene cover colors were black, white on black and green plus a control without cover. Covered but not grafted crops had a more uniform flowering distribution. The number of flowers was greater for the white/black grafted treatment. All the polyethylene covers favored flowering for the non grafted plants. Grafting reduced flowering for the black or green polyethylene covers treatments. The fruit set increased with the use of polyethylene cover but was not influenced by grafting. The uniform distribution of flowering remained during fruiting only for grafted plants and soil covered with black or green polyethylene. Both polyethylene cover and grafting favored early harvesting. The 'Yoshinari'/'Ikky' graft caused taller plants but fruit were thicker and smaller and did not meet the commercial standard. The best quality fruit and highest yields were obtained in the black and white/black treatments, without grafting.

  8. Effects of gamma irradiation on polypropylene, polypropylene + high density polyethylene and polypropylene + high density polyethylene + wood flour

    Energy Technology Data Exchange (ETDEWEB)

    Reyes, J.; Albano, C.; Davidson, E.; Poleo, R. [Universidad Central de Venezuela, Caracas (Venezuela). Escuela de Quimica; Gonzalez, J.; Ichazo, M. [Universidad Simon Bolivar, Dept. de Mecanica, Caracas (Venezuela); Chipara, M. [Research Institute for Electrotechnics, Bucharest (Romania)

    2001-04-01

    The effect of the gamma-irradiation on the mechanical properties of the composites, Polypropylene (PP), PP+high density Polyethylene (HDPE), PP+ HDPE+wood flour, where HDPE is virgin and recycled, was studied. This paper discusses the behavior of the composites after exposure to various doses of gamma irradiation (1-7 MRads) in the presence of oxygen. The dependence of mechanical properties on the integral dose for a constant dose rate of 0.48 MRads/h confirms the influence of the irradiation. Strong effects on the elongation at break and break strength is noticed. The mathematical analysis suggests for the PP+r-HDPE a bimolecular process of the elongation at break. On the order hand, for the PP+HDPE a complex process is represented for a three exponential equation. (orig.)

  9. Effect of ultraviolet radiation in the photo-oxidation of High Density Polyethylene and Biodegradable Polyethylene films

    Science.gov (United States)

    Martínez-Romo, A.; González Mota, R.; Bernal, J. J. Soto; Frausto Reyes, C.; Rosales Candelas, I.

    2015-01-01

    One of the most widely used plastics in the world is the High density polyethylene (HDPE), it is a stable material due to its carbon-carbon bonds, causing their slow degradation; which is why we are looking for alternative ways to accelerate the degradation process of this polymer. An alternative is the addition of oxidized groups in its molecular structure, which results in the development of polymers susceptible to biodegradation (PE-BIO). In this paper, HDPE and PE-BIO films were exposed to UV-B radiation (320-280 nm) at different exposure times, 0-60 days. The effects of UV radiation in samples of HDPE and PE-BIO were characterized using infrared spectroscopy with attenuated total reflectance (ATR). The results show that the exposed materials undergo changes in their molecular structure, due to the infrared bands formed which corresponds to the photo-oxidation of HDPE and PE films when submitted to UV-B radiation.

  10. Photografting of perfluoroalkanes onto polyethylene surfaces via azide/nitrene chemistry

    Science.gov (United States)

    Siegmann, Konstantin; Inauen, Jan; Villamaina, Diego; Winkler, Martin

    2017-02-01

    The purpose of this study is to render polyethylene surfaces strongly and permanently hydrophobic. Polyethylene is a common plastic and, because of its inertness, difficult to graft. We chose polyethylene as example because of its ubiquity and model character. As graft chains linear perfluoroalkyl residues (-C4F9, -C6F13, -C8F17 and -C10F21) were chosen, and photografting was selected as grafting method. Photolytically generated nitrenes can insert into carbon-hydrogen bonds and are therefore suited for binding to polyethylene. Hydrophobic photo reactive surface modifiers based on azide/nitrene chemistry are designed, synthesized in high yield and characterized. Four new molecules are described. Water contact angles exceeding 110° were achieved on grafted polyethylene. One problem is to demonstrate that the photografted surface modifiers are bound covalently to the polyethylene. Abrasion tests show that all new molecules, when photografted to polyethylene, have a higher abrasion resistance than a polyethylene surface coated with a long-chain perfluoroalkane. Relative abrasion resitances of 1.4, 2.0, 2.1 and 2.5 compared to the fluoroalkane coating were obtained for the four compounds. An abrasion model using ice is developed. Although all four compounds have the same λmax of 266 nm in acetonitrile solution, their molar extincition coefficients increase from 1.6·104 to 2.2·104 with increasing length of the fluorotelomer chain. Exitonic coupling of the chromophores of the surface modifiers is observed for specific molecules in the neat state. A linear correlation of water contact angle with fluorine surface content, as measured by photoelectron spectroscopy, in grafted polyethylene surfaces is established.

  11. Graphite/Ultra-High Modulus Polyethylene Hybrid Fiber Composites with Epoxy and Polyethylene Matrices for Cosmic Radiation Shielding

    Science.gov (United States)

    2003-01-01

    One of the most significant technical challenges in long-duration space missions is that of protecting the crew from harmful radiation. Protection against such radiation on a manned Mars mission will be of vital importance both during transit and while on the surface of the planet. The development of multifunctional materials that serve as integral structural members of the space vehicle and provide the necessary radiation shielding for the crew would be both mission enabling and cost effective. Additionally, combining shielding and structure could reduce total vehicle mass. Hybrid laminated composite materials having both ultramodulus polyethylene (PE) and graphite fibers in epoxy and PE matrices could meet such mission requirements. PE fibers have excellent physical properties, including the highest specific strength of any known fiber. Moreover, the high hydrogen (H) content of polyethylene makes the material an excellent shielding material for cosmic radiation. When such materials are incorporated into an epoxy or PE matrix a very effective shielding material is expected. Boron (B) may be added to the matrix resin or used as a coating to further increase the shielding effectiveness due to B s ability to slow thermal neutrons. These materials may also serve as micrometeorites shields due to PE s high impact energy absorption properties. It should be noted that such materials can be fabricated by existing equipment and methods. It is the objective of this work therefore to: (a) perform preliminary analysis of the radiation transport within these materials; (b) fabricate panels for mechanical property testing before and after radiation exposure. Preliminary determination on the effectiveness of the combinations of material components on both shielding and structural efficiency will be made.

  12. Graphite/Ultra-High Modulus Polyethylene Hybrid Fiber Composites with Epoxy and Polyethylene Matrices for Cosmic Radiation Shielding

    Science.gov (United States)

    2003-01-01

    One of the most significant technical challenges in long-duration space missions is that of protecting the crew from harmful radiation. Protection against such radiation on a manned Mars mission will be of vital importance both during transit and while on the surface of the planet. The development of multifunctional materials that serve as integral structural members of the space vehicle and provide the necessary radiation shielding for the crew would be both mission enabling and cost effective. Additionally, combining shielding and structure could reduce total vehicle mass. Hybrid laminated composite materials having both ultramodulus polyethylene (PE) and graphite fibers in epoxy and PE matrices could meet such mission requirements. PE fibers have excellent physical properties, including the highest specific strength of any known fiber. Moreover, the high hydrogen (H) content of polyethylene makes the material an excellent shielding material for cosmic radiation. When such materials are incorporated into an epoxy or PE matrix a very effective shielding material is expected. Boron (B) may be added to the matrix resin or used as a coating to further increase the shielding effectiveness due to B s ability to slow thermal neutrons. These materials may also serve as micrometeorites shields due to PE s high impact energy absorption properties. It should be noted that such materials can be fabricated by existing equipment and methods. It is the objective of this work therefore to: (a) perform preliminary analysis of the radiation transport within these materials; (b) fabricate panels for mechanical property testing before and after radiation exposure. Preliminary determination on the effectiveness of the combinations of material components on both shielding and structural efficiency will be made.

  13. Degradation of fipronil (Termidor) in aqueous solution stored in polyethylene tanks exposed to sunlight or shade.

    Science.gov (United States)

    Husen, T J; Spomer, N A; Kamble, S T

    2009-05-01

    Pest Management Professionals commonly use polyethylene or fiberglass tanks for mixing and applying termiticides. We investigated the stability of fipronil (Termidor SC) (0.06%, 0.09% and 0.125% active ingredient) in aqueous solutions stored in polyethylene tanks under sun and shade for 2 week. Chemical analysis of tank-mixed solutions sampled at 0, 24, 48, 72, 168 and 336 h indicated that fipronil remained stable. Our data indicated that polyethylene tanks prevent fipronil from photodegradation and these tanks can be safely used for short term storage (up to 2 week) of liquid termiticides.

  14. Character of the distribution of radiation-grafted polyacrylic acid in polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Agamalyan, M.M.; Babkin, I.Yu.; Burukhin, S.B.; Evmenenko, G.A.

    1988-03-01

    The supramolecular structure of the radiation-grafted polyethylene-polyacrylic acid system has been studied by means of the small-angle scattering of thermal neutrons. It has been shown that the grafted polymer in polyethylene forms particles of a microphase, whose disperse composition includes fractions with significantly different dimensions. The distribution function of the particles with respect to their radius has been presented. The concentration of the tiny formations coincides in order of magnitude with the concentration of the polymerization centers calculated from the radiation-chemical yield of active centers for polyethylene. The quantitative composition of the scattering particles has been evaluated.

  15. Molecular Dynamics Simulation of Chain Folding for Polyethylene Subjected to Vibration Excitation

    Directory of Open Access Journals (Sweden)

    Junfeng Gu

    2014-01-01

    Full Text Available We propose a molecular dynamics method with vibration excitation, named as VEMD, to investigate the vibration effect on chain folding for polymer molecule. The VEMD method is based on the introduction of periodic force, the amplitude and frequency of which can be adjusted, and the method was applied to the folding simulation of a polyethylene chain. Simulation results show that the vibration excitation significantly affects the folding of the polyethylene, and frequency and amplitude of the vibration excitation play key roles in VEMD. Different frequencies and amplitudes will determine how and to what extent does the vibration excitation affect the folding process of the polyethylene structure.

  16. SOLUTION CRYSTALLIZATION OF METALLOCENE SHORT CHAIN BRANCHED POLYETHYLENE: MORPHOLOGY AND MECHANISM

    Institute of Scientific and Technical Information of China (English)

    Qiang Fu; Rong-ni Du; Fang-Chyou Chiu

    2000-01-01

    Solution crystallization of metallocene short chain branched polyethylene (SCBPE) was carried out and very nice single crystals were obtained. Compared with single crystals grown from linear polyethylene, SCBPE single crystals are dirty due to intermolecular heterogeneity The crystal morphology changes with crystallization temperatures. Lozenge, truncated lozenge, hexagonal, rounded and elongated crystal morphologies have been found at much lower crystallization temperature than in linear polyethylene. The electron diffraction shows there is a possibility that the single crystals may have hexagonal packing in a crystallization temperature range. The lateral habits of single crystal are discussed based on roughening theories.

  17. Zinc phthalocyanine labelled polyethylene glycol: preparation, characterization, interaction with bovine serum albumin and near infrared fluorescence imaging in vivo.

    Science.gov (United States)

    Lv, Feng; Cao, Bo; Cui, Yanli; Liu, Tianjun

    2012-05-25

    Zinc phthalocyanine labelled polyethylene glycol was prepared to track and monitor the in vivo fate of polyethylene glycol. The chemical structures were characterized by nuclear magnetic resonance and infrared spectroscopy. Their light stability and fluorescence quantum yield were evaluated by UV-Visible and fluorescence spectroscopy methods. The interaction of zinc phthalocyanine labelled polyethylene glycol with bovine serum albumin was evaluated by fluorescence titration and isothermal titration calorimetry methods. Optical imaging in vivo, organ aggregation as well as distribution of fluorescence experiments for tracking polyethylene glycol were performed with zinc phthalocyanine labelled polyethylene glycol as fluorescent agent. Results show that zinc phthalocyanine labelled polyethylene glycol has good optical stability and high emission ability in the near infrared region. Imaging results demonstrate that zinc phthalocyanine labelled polyethylene glycol can track and monitor the in vivo process by near infrared fluorescence imaging, which implies its potential in biomaterials evaluation in vivo by a real-time noninvasive method.

  18. STRUCTURAL CHARACTERIZATION OF POLYETHYLENES BY DSC ANALYSIS AFTER CRYSTALLIZATION SEGREGATION

    Institute of Scientific and Technical Information of China (English)

    Yu Ma; Mao Xu

    2000-01-01

    The molecular structure of polyethylene (PE) samples with various comonomers including propylene, 1-butene and 1-hexene was investigated by DSC and 13C-NMR techniques. The density of the samples varies from 0.948 g/cm3 to 0.917 g/cm3, and the molecular weight determined by the GPC method is in the range of 1~2 × 105. The branch point content of the samples was determined by 13C-NMR measurements and was found to be less than 20 per 1000 C atoms along the main chain. Crystallization segregation DSC technique (CSDSC) was used to characterize the branch point distribution or the segment length distribution of PEs. The crystallization segregation was performed in a successive annealing process at decreasing temperatures. The interval of two successive annealing temperatures was 6 K, and the time length of each annealing step was 2.5 h. The CSDSC results clearly indicate that all the PE samples used, including some metallocene PEs,more or less exhibit their non-uniformity in segment length distribution, and bimodal or multimodal CSDSC curves were usually observed. For quantitative characterization of the CSDSC curves and the segment length distribution two parameters,the average melting point, TmAV, and the root-mean-square deviation of melting temperature, (ATm2AV)1/2, were proposed.TmAV is corresponding to the average segment length due to branching and (ATm2AV)1/2 gives information about the width of the segment length distribution. Experimental results show that both the degree of average melting temperature depression and the width of the distribution seem to increase with increasing the branching content and are dependent on the type of comonomers. Very good reproducibility and additivity of the CSDSC method were evidenced experimentally. It was concluded that the CSDSC technique is a sensitive and convenient method for characterizing the segment length distribution of branched polyethylenes and will be of great interest in structure-property relationship

  19. Biofuels Barrier Properties of Polyamide 6 and High Density Polyethylene

    Directory of Open Access Journals (Sweden)

    Fillot L.-A.

    2015-02-01

    Full Text Available In this paper, a comparison of the biofuels barrier properties of PolyAmide 6 (PA6 and High Density PolyEthylene (HDPE is presented. Model fuels were prepared as mixtures of toluene, isooctane and ethanol, the ethanol volume fraction varying between 0% and 100%. Barrier properties were determined at 40°C by gravimetric techniques or gas chromatography measurements, and it was shown that polyamide 6 permeability is lower than that of polyethylene on a wide range of ethanol contents up to 85% of ethanol (E85 in the biofuel, permeability of PA6 being 100 times lower than that of HDPE for low ethanol content fuels (E5, E0. The time-lags were also compared, and on the whole range of ethanol contents, HDPE permeation kinetics appears to be much faster than that of PA6, the time lag for a 1 mm thick specimens in presence of E10 being 50 days for PA6 and 0.5 days for HDPE. The compositions of the solvent fluxes were analyzed by FID gas chromatography, and it turned out that the solvent flux was mainly made up of ethanol (minimum 95% in the case of PA6, whereas in the case of HDPE, solvent flux was mainly made up of hydrocarbons. The implication of this difference in the solvent flux composition is discussed in the present article, and a side effect called the “fuel exhaustion process” is presented. The influence of the sample thickness was then studied, and for the different biofuels compositions, the pervaporation kinetics of polyamide 6 appeared to evolve with the square of the thickness, a long transitory regime being highlighted in the case of PA6. This result implies that the time needed to characterize the steady state permeability of thick PA6 parts such as fuel tanks can be very long (one year or more, this duration being far superior to the Euros 5 or Euro 6 standard emission measurements time scale. The influence of temperature on the permeability was finally assessed, and the activation energy that is the signature of the temperature

  20. DWNT/Hydrogenated Fullerene Reinforced Polyethylene for Radiation Shielding Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Phase I has demonstrated the feasibility of the overall objective to develop strong and lightweight polyethylene composites with double-walled nanotubes for...

  1. 76 FR 39855 - Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in Part, of...

    Science.gov (United States)

    2011-07-07

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF COMMERCE International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in... India covering the period January 1, 2009, through December 31, 2009. See Antidumping or...

  2. Preparation of Fe3O4Spherical Nanoporous Particles Facilitated by Polyethylene Glycol 4000

    Directory of Open Access Journals (Sweden)

    Wang Li-Li

    2009-01-01

    Full Text Available Abstract Much interest has been attracted to the magnetic materials with porous structure because of their unique properties and potential applications. In this report, Fe3O4nanoporous particles assembled from small Fe3O4nanoparticles have been prepared by thermal decomposition of iron acetylacetonate in the presence of polyethylene glycol 4000. The size of the spherical nanoporous particles is 100–200 nm. Surface area measurement shows that these Fe3O4nanoporous particles have a high surface area of 87.5 m2/g. Magnetization measurement and Mössbauer spectrum indicate that these particles are nearly superparamagnetic at room temperature. It is found that the morphology of the products is greatly influenced by polyethylene glycol concentration and the polymerization degree of polyethylene glycol. Polyethylene glycol molecules are believed to facilitate the formation of the spherical assembly.

  3. Morphological and thermal evaluation of blends of polyethylene wax and paraffin

    Energy Technology Data Exchange (ETDEWEB)

    Akishino, J.K. [Graduate Program in Engineering and Materials Science, Federal University of Parana, Curitiba, PR (Brazil); Institute for the Development of Technology, LACTEC, PO Box 19067, 81531-990 Curitiba, PR (Brazil); Cerqueira, D.P. [Companhia de Eletricidade do Estado da Bahia—COELBA, Salvador, BA (Brazil); Silva, G.C. [Institute for the Development of Technology, LACTEC, PO Box 19067, 81531-990 Curitiba, PR (Brazil); Swinka-Filho, V. [Graduate Program in Engineering and Materials Science, Federal University of Parana, Curitiba, PR (Brazil); Institute for the Development of Technology, LACTEC, PO Box 19067, 81531-990 Curitiba, PR (Brazil); Munaro, M., E-mail: marilda@lactec.org.br [Graduate Program in Engineering and Materials Science, Federal University of Parana, Curitiba, PR (Brazil); Institute for the Development of Technology, LACTEC, PO Box 19067, 81531-990 Curitiba, PR (Brazil)

    2016-02-20

    Highlights: • Thermal properties of polyethylene wax and paraffin were investigated. • The blends were characterized by DSC, XRD and DMTA. • The melting temperatures were between those of the pure constituents. • The crystallinity decreased with addition of polyethylene wax. • The softening temperatures did not vary linearly with the composition. - Abstract: The thermal behavior and the morphology of blends of polyethylene wax and paraffin were investigated to evaluate the feasibility of using these materials to obtain a new temperature-indicating device to use in order to indicate failures in electrical connections due to overheating. The samples were evaluated with differential scanning calorimetry (DSC), X-ray diffraction (XRD) and dynamic mechanical thermal analysis (DMTA). The results showed that the crystallinity decreases as the concentration of polyethylene wax increases. In the compositions tested, the components were not miscible in the crystalline phase, and these compositions exhibited solid/liquid transitions at temperatures between those of the individual components.

  4. Computational investigation of the neutron shielding and activation characteristics of borated concrete with polyethylene aggregate

    Energy Technology Data Exchange (ETDEWEB)

    Park, S.J.; Jang, J.G.; Lee, H.K., E-mail: leeh@kaist.ac.kr

    2014-09-15

    This paper presents the result of a computational study to investigate the neutron shielding and activation characteristics of concretes containing boron carbide and polyethylene. Various mixes were considered with changes in the contents of boron carbide and polyethylene aggregate. The Monte Carlo simulation code MCNP-5 was utilized to determine the transmission of neutron through concrete at different energies from 0.1 eV to 1 MeV, and ORIGEN-S code was then used to predict activation characteristics of the concretes. It was shown that the replacement of polyethylene in borated concrete greatly enhanced the shielding efficiency of the concrete, and total activity levels of the concrete were considerably decreased with this replacement. Furthermore, double-layered structures having the first layer of polyethylene aggregate-replaced concrete and the second layer of 2 wt% borated concrete are shown to improve shielding efficiency more significantly than monolithic structures.

  5. PROSPECTS OF HIGH-CURRENT ELECTRON BEAMS APPLICATION TO RADIATION POLYETHYLENE CROSS-LINKING

    Directory of Open Access Journals (Sweden)

    A.G. Gurin

    2013-09-01

    Full Text Available A possibility of applying a pulse-periodic high-current induction electron accelerators to radiation polyethylene cross-linking is considered in the article. A comparative analysis with other devices used for irradiation is made.

  6. Effect of biobased fillers nature on biodeterioration of hybrid polyethylene composites by mold fungi

    Science.gov (United States)

    Mastalygina, E. E.; Popov, A. A.; Pantyukhov, P. V.

    2017-06-01

    The paper is devoted to investigation of deterioration of natural fillers and polyethylene composites on their basis (polyethylene/filler=70/30) due to the action of mold fungi. The fillers chemical composition, dimensional parameters and biodegradability have been analyzed as factors exert a considerable impact on composite materials biodeterioration. It has been found that the principal factor determining the biodeterioration of polyethylene/filler composites by mold fungi is chemical composition of a filler and, in turn, its biodegradability. The excess of holocellulose content over lignin content and high protein content in a filler are able to induce biofouling of the polymeric composite materials. The presence of soluble and easy hydrolysed fraction in a filler increases its availability in a polymeric matrix. According to the study results, most effective natural fillers as additives stimulating polyethylene composites biodegradability are milled straw of seed flax and hydrolyzed keratin of bird’s feather.

  7. Miscibility studies of Polyethylene Glycol with Polystyrene in Toluene by Various Physical and Advanced Techniques

    Science.gov (United States)

    Padmanaban, R.; Venkatramanan, K.

    2016-10-01

    Polyethylene glycol (PEG) is a chemical that has an extensive variety of applications in the world of medicine. It is used as a base to manufacture certain medicines, assist in drug delivery, and is also used as an agent in some medical procedures. It is an osmotic laxative. Polyethylene glycol works by retaining water in the stool, resulting in softer stools and more frequent bowel movements. Polyethylene glycol does not affect glucose and electrolytes in the body. PEG refers to a hydrocarbon molecule that can have a variable size, and different sizes can have different physical properties, giving this compound a great deal of flexibility in its application. In the present study, Polyethylene Glycol (PEG) (Molar mass: 1500) is blended with Polystyrene (PS) (Molar mass: 35000) in Toluene. The miscibility nature of the poly blend is analyzed by Ultrasonic velocity, viscosity, density and refractive index techniques at 303K. The compatibility nature of the blend is confirmed by Differential Scanning Calorimetry (DSC) studies.

  8. Efficient and selective degradation of polyethylenes into liquid fuels and waxes under mild conditions.

    Science.gov (United States)

    Jia, Xiangqing; Qin, Chuan; Friedberger, Tobias; Guan, Zhibin; Huang, Zheng

    2016-06-01

    Polyethylene (PE) is the largest-volume synthetic polymer, and its chemical inertness makes its degradation by low-energy processes a challenging problem. We report a tandem catalytic cross alkane metathesis method for highly efficient degradation of polyethylenes under mild conditions. With the use of widely available, low-value, short alkanes (for example, petroleum ethers) as cross metathesis partners, different types of polyethylenes with various molecular weights undergo complete conversion into useful liquid fuels and waxes. This method shows excellent selectivity for linear alkane formation, and the degradation product distribution (liquid fuels versus waxes) can be controlled by the catalyst structure and reaction time. In addition, the catalysts are compatible with various polyolefin additives; therefore, common plastic wastes, such as postconsumer polyethylene bottles, bags, and films could be converted into valuable chemical feedstocks without any pretreatment.

  9. Multifunctional Carbon Nanotube/Polyethylene Complex Composites for Space Radiation Shielding Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Polyethylene (PE), due to its high hydrogen content relative to its weight, has been identified by NASA as a promising radiation shielding material against galactic...

  10. 76 FR 39855 - Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in Part, of Antidumping...

    Science.gov (United States)

    2011-07-07

    ... Order, Finding, or Suspended Investigation; Opportunity to Request an Administrative Review, 75 FR 38074... Countervailing Duty Administrative Reviews and Deferral of Initiation of Administrative Review, 75 FR 53274... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission,...

  11. Morphology and thermal properties of recycled polyacrylonitrile fiber blends with poly(ethylene terephthalate): Microstructural characterization

    CSIR Research Space (South Africa)

    Adegbola, TA

    2016-04-01

    Full Text Available of Applied Polymer Science, vol. 133: DOI: 10.1002/app.43777 Morphology and thermal properties of recycled polyacrylonitrile fiber blends with polyethylene terephthalate: Microstructural characterization Adegbola TA Rotimi, SE Suprakas, SR ABSTRACT...

  12. Efficient and selective degradation of polyethylenes into liquid fuels and waxes under mild conditions

    Science.gov (United States)

    Jia, Xiangqing; Qin, Chuan; Friedberger, Tobias; Guan, Zhibin; Huang, Zheng

    2016-01-01

    Polyethylene (PE) is the largest-volume synthetic polymer, and its chemical inertness makes its degradation by low-energy processes a challenging problem. We report a tandem catalytic cross alkane metathesis method for highly efficient degradation of polyethylenes under mild conditions. With the use of widely available, low-value, short alkanes (for example, petroleum ethers) as cross metathesis partners, different types of polyethylenes with various molecular weights undergo complete conversion into useful liquid fuels and waxes. This method shows excellent selectivity for linear alkane formation, and the degradation product distribution (liquid fuels versus waxes) can be controlled by the catalyst structure and reaction time. In addition, the catalysts are compatible with various polyolefin additives; therefore, common plastic wastes, such as postconsumer polyethylene bottles, bags, and films could be converted into valuable chemical feedstocks without any pretreatment. PMID:27386559

  13. Highly conductive solid polymer electrolyte membranes based on polyethylene glycol-bis-carbamate dimethacrylate networks

    Science.gov (United States)

    Fu, Guopeng; Dempsey, Janel; Izaki, Kosuke; Adachi, Kaoru; Tsukahara, Yasuhisa; Kyu, Thein

    2017-08-01

    In an effort to fabricate highly conductive, stable solid-state polymer electrolyte membranes (PEM), polyethylene glycol bis-carbamate (PEGBC) was synthesized via condensation reaction between polyethylene glycol diamine and ethylene carbonate. Subsequently, dimethacrylate groups were chemically attached to both ends of PEGBC to afford polyethylene glycol-bis-carbamate dimethacrylate (PEGBCDMA) precursor having crosslinking capability. The melt-mixed ternary mixtures consisting of PEGBCDMA, succinonitrile plasticizer, and lithium trifluorosulphonyl imide salt were completely miscible in a wide compositional range. Upon photo-crosslinking, the neat PEGBCDMA network was completely amorphous exhibiting higher tensile strength, modulus, and extensibility relative to polyethylene glycol diacrylate (PEGDA) counterpart. Likewise, the succinonitrile-plasticized PEM network containing PEGBCDMA remained completely amorphous and transparent upon photo-crosslinking, showing superionic conductivity, improved thermal stability, and superior tensile properties with improved capacity retention during charge/discharge cycling as compared to the PEGDA-based PEM.

  14. PREPARATION OF NOVEL POLYETHYLENE-graft- POLY(4-VINYLPYRIDINE)-SUPPORTED METALLOCENE CATALYSTS FOR ETHYLENE POLYMERIZATION

    Institute of Scientific and Technical Information of China (English)

    Ning Zhu; Yong Chen; Zi-long Li; Yuan-xia Liu; Yu-cai Ke; Wen-Hua Sun

    2003-01-01

    Polyethylene (PE) grafting 4-vinylpyridine copolymers has been produced as powders of different rushes by the irradiation method. After treatment with methylaluminoxane (MAO), the copolymers were used as supports for Cp2ZrCl2 catalyst. Results of X-ray photoelectron spectroscopy, Fourier transforms infrared spectroscopy, ultraviolet spectroscopy and scanning electron microscope measurements show that the catalytic sites have been linked through MAO on the PE-graft-4-vinylpyridine (PEVP). The percentages of grafting 4-vinylpyridine and supported Cp2ZrCl2 depend on the size of polyethylene powder. The smaller the polyethylene powder, the more percent of 4-vinylpyridine groups and Cp2ZrCl2 exist on the polyethylene chains, and the PEVP-supported catalyst has a relatively high activity for ethylene polymerization.

  15. Mid term results of total hip arthroplasty using polyethylene-ceramic composite (Sandwich liner

    Directory of Open Access Journals (Sweden)

    Tao Wang

    2016-01-01

    Conclusions: Our experience with the ceramic-polyethylene sandwich liner acetabular component has been disappointing because of the high rate of fracture and osteolyis. We have discontinued the use of this device and recommend the same.

  16. Syntheses of Poly(ethylene oxide) Macromonomers Carrying Tertiary Amine and Quaternary Ammonium End Groups

    National Research Council Canada - National Science Library

    Senyo, Takamichi; Atago, Yuji; Liang, Huanan; Shen, Renhua; Ito, Koichi

    2003-01-01

    p-Vinylbenzyl alcohol, partially alkoxidated with potassium naphthalene, was used successfully to initiate living polymerization of ethylene oxide to afford α-p-vinylbenzyl-ω-hydroxy poly(ethylene oxide) (PEO) macromonomers. The ω...

  17. Production of an extracellular polyethylene-degrading enzyme(s) by Streptomyces species.

    Science.gov (United States)

    Pometto, A L; Lee, B T; Johnson, K E

    1992-01-01

    Extracellular culture concentrates were prepared from Streptomyces viridosporus T7A, Streptomyces badius 252, and Streptomyces setonii 75Vi2 shake flask cultures. Ten-day-heat-treated (70 degrees C) starch-polyethylene degradable plastic films were incubated with shaking with active or inactive enzyme for 3 weeks (37 degrees C). Active enzyme illustrated changes in the films' Fourier transform infrared spectra, mechanical properties, and polyethylene molecular weight distributions. PMID:1610196

  18. Experimental study on correlation between sound velocity and solute molecular weight in polyethylene glycol solution

    Institute of Scientific and Technical Information of China (English)

    YIN XiangYu; SONG Hao; ZHOU HuiJun

    2009-01-01

    In this study, ultrasound grating was used to measure the sound velocity in solutions of ethylene glycol and polyethylene glycol with molecular weights of 200, 600, 2000, and 10000. We found Parthasarathy empirical rule, that is, sound velocity is higher in the solution of larger molecules, is invalid in the case of polyethylene glycol solution. We tried to provide a tentative explanation using the Flory-Krigbaum's chained block cloud model.

  19. Polyethylene Glycol Drilling Fluid for Drilling in Marine Gas Hydrates-Bearing Sediments: An Experimental Study

    OpenAIRE

    Lixin Kuang; Yibing Yu; Yunzhong Tu; Ling Zhang; Fulong Ning; Guosheng Jiang; Tianle Liu

    2011-01-01

    Shale inhibition, low-temperature performance, the ability to prevent calcium and magnesium-ion pollution, and hydrate inhibition of polyethylene glycol drilling fluid were each tested with conventional drilling-fluid test equipment and an experimental gas-hydrate integrated simulation system developed by our laboratory. The results of these tests show that drilling fluid with a formulation of artificial seawater, 3% bentonite, 0.3% Na 2 CO 3 , 10% polyethylene glycol, 20% NaCl, 4% SMP-2, 1% ...

  20. Determination of the boron content in polyethylene samples using the reactor Orphée

    CERN Document Server

    Gunsing, F; Aberle, O

    2017-01-01

    The boron content of two unknown types of polyethylene has been determined relative to a known reference type. Samples of polyethylene, including a known boron-less one, were irradiated with thermal neutrons at the reactor Orphée at Saclay in France. Prompt gamma rays were measured with a CeBr$_3$ detector and the intensity of the 478~keV line from $^{10}${B}(n,$\\alpha_1\\gamma$)$^{7}{Li*} was extracted.

  1. RDX-Polyethylene Wax Formulations as Potential Replacements for Tetryl in Fuze Leads, Boosters and Magazines

    Science.gov (United States)

    1986-08-01

    prepared by the solvent cut method, PBX-9407, are listed for comparison with RDX and Tetryl in Table 2. The substantial decrease in impact sensitivity...earliest MRL studies dealt with RDX grade ~ 1 1 % polyethylene wax as a potential replacement for beeswax in Comp. B RD~/~~~/ beeswax 60:40:1 [6,71. Some... solvent or toxic vapours, and all major ingredients are of low toxicity. The polyethylene wax is readily available through local suppliers and the

  2. Superior accuracy of model-based radiostereometric analysis for measurement of polyethylene wear

    DEFF Research Database (Denmark)

    Stilling, M; Kold, S; de Raedt, S

    2012-01-01

    The accuracy and precision of two new methods of model-based radiostereometric analysis (RSA) were hypothesised to be superior to a plain radiograph method in the assessment of polyethylene (PE) wear.......The accuracy and precision of two new methods of model-based radiostereometric analysis (RSA) were hypothesised to be superior to a plain radiograph method in the assessment of polyethylene (PE) wear....

  3. Experimental study on correlation between sound velocity and solute molecular weight in polyethylene glycol solution

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    In this study,ultrasound grating was used to measure the sound velocity in solutions of ethylene glycol and polyethylene glycol with molecular weights of 200,600,2000,and 10000.We found Parthasarathy empirical rule,that is,sound velocity is higher in the solution of larger molecules,is invalid in the case of polyethylene glycol solution. We tried to provide a tentative explanation using the Flory-Krigbaum’s chained block cloud model.

  4. Behavior of Hylamer polyethylene in hip arthroplasty: comparison of two gamma sterilization techniques

    OpenAIRE

    Stea, S.; Antonietti, B.; Baruffaldi, F.; Visentin, M; Bordini, B.; Sudanese, A.; Toni, A.

    2005-01-01

    Hylamer polyethylene was introduced in the 1990s as an alternative to conventional polyethylene. Its chemical and physical properties, and especially its high crystallinity, were claimed to improve resistance to wear. Initially Hylamer devices were sterilized by gamma radiation in air, then the technique was changed and gamma radiation was performed in the absence of oxygen. Clinical experience has shown the early loosening of some devices made from Hylamer. The aim of this study was to ascer...

  5. Radiation Induced Crosslinking of Polyethylene in the Presence of Bifunctional Vinyl Monomers

    DEFF Research Database (Denmark)

    Joshi, M. S.; Singer, Klaus Albert Julius; Silverman, J.

    1977-01-01

    Several reports have been published showing that the radiation induced grafting of bifunctional vinyl monomers to low density polyethylene results in a product with an unusually high density of crosslinks. The same grafting reactions are shown to reduce the incipient gel dose by more than a factor...... of fifty. This paper is concerned with the apparent crosslinking produced by the radiation grafting of two monomers to polyethylene: acrylic acid and acrylonitrile....

  6. Synthesis of Degradable Poly[(Ethylene Glycol)-co-(Glycolic Acid)] via the Post-Polymerization Oxyfunctionalization of Poly(Ethylene Glycol).

    Science.gov (United States)

    Liu, Di; Bielawski, Christopher W

    2016-10-01

    To enhance the limited degradability of poly(ethylene glycol) (PEG), a straightforward method of synthesizing poly[(ethylene glycol)-co-(glycolic acid)] (P(EG-co-GA)) via a ruthenium-catalyzed, post-polymerization oxyfunctionalization of various PEGs is developed. Using this method, a set of copolymers with GA compositions of up to 8 mol% are prepared with minimal reduction in molecular weight (<10%) when compared to their commercially available starting materials. The P(EG-co-GA) copolymers are shown to undergo hydrolysis under mild conditions. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Rheological behavior of fumed silica suspension in polyethylene glycol

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The rheological behavior of fumed silica suspensions in polyethylene glycol(PEG) was studied at steady and oscillatory shear stress using AR 2000 stress controlled rheometer. The systems show reversible shear thickening behavior and the shear-thickening behavior can be explained by the clustering mechanism. The viscosity and the degree of shear-thickening of the systems strongly depend on the mass fraction of the silica, the molecular weigh of PEG and the frequency used in the rheological measurement. The silica volume fraction of the systems is 1.16 %-3.62%, corresponding to the mass fraction of 4%- 9 %. The shear-thickening taking place in the low volume fraction may contribute to the fractal nature of the silica. At oscillatory shear stress, when the shear stress is less than the critical stress, the storage modulus decreases significantly, meanwhile the loss modulus and the complex viscosity almost remain unchanged; when the shear stress is larger than the critical stress, the storage modulus, the loss modulus and the complex viscosity increase with the increase of shear stress. The loss modulus is larger than the storage modulus in the range of stress studied and both moduli depend on frequency.

  8. Chemical modification and functionalisation of poly(ethylene terephthalate) fiber

    Energy Technology Data Exchange (ETDEWEB)

    Kim, I.H.; Kim, S.H. [Sungkyunkwan University, Suwon (Korea)

    2002-05-01

    Poly(ethylene terephthalate ) (PET) fibers were modified by deep UV irradiation which was produced by a low pressure mercury lamp. FT-IR and XPS analyses were used to elucidate the surface chemical composition of PET fibers treated with UV. Relative O{sub 1s} intensity increased considerably and it was found that oxygen was incorporated in the form of COO on the fiber surface. FT-IR and XPS analyses proved the existence of carboxylic groups on the surfaces and the adsorption test of cationic compound further supported these results. The concentration of carboxylic acid group on the surface increased remarkably with increasing irradiation time. XPS analysis and adsorption experiments proved that the surface structure of the UV{sub i}rradiated PET fibers were stable for 12 months. Antibacterial property and the deodorization rate of UV-irradiated PET fibers adsorbed with the berberine compound were investigated. reduction rates of bacteria increased by about 21 to 99% compared to unradiated PET fiber. Deodorization rates of 23% for unradiated PET fiber increased to about 75% for 30 min irradiated samples. (author). 33 refs., 3 tabs., 11 figs.

  9. Calvarial reconstruction using high-density porous polyethylene cranial hemispheres

    Directory of Open Access Journals (Sweden)

    Nitin J Mokal

    2011-01-01

    Full Text Available Aims: Cranial vault reconstruction can be performed with a variety of autologous or alloplastic materials. We describe our experience using high-density porous polyethylene (HDPE cranial hemisphere for cosmetic and functional restoration of skull defects. The porous nature of the implant allows soft tissue ingrowth, which decreases the incidence of infection. Hence, it can be used in proximity to paranasal sinuses and where previous alloplastic cranioplasties have failed due to implant infection. Materials and Methods: We used the HDPE implant in seven patients over a three-year period for reconstruction of moderate to large cranial defects. Two patients had composite defects, which required additional soft tissue in the form of free flap and tissue expansion. Results: In our series, decompressive craniectomy following trauma was the commonest aetiology and all defects were located in the fronto-parieto-temporal region. The defect size was 10 cm on average in the largest diameter. All patients had good post-operative cranial contour and we encountered no infections, implant exposure or implant migration. Conclusions: Our results indicate that the biocompatibility and flexibility of the HDPE cranial hemisphere implant make it an excellent alternative to existing methods of calvarial reconstruction.

  10. Surface modification of polypropylene membrane by polyethylene glycol graft polymerization.

    Science.gov (United States)

    Abednejad, Atiye Sadat; Amoabediny, Ghasem; Ghaee, Azadeh

    2014-09-01

    Polypropylene hollow fiber microporous membranes have been used in a wide range of applications, including blood oxygenator. The hydrophobic feature of the polypropylene surface causes membrane fouling. To minimize fouling, a modification consisting of three steps: surface activation in H2 and O2 plasma, membrane immersion in polyethylene glycol (PEG) and plasma graft polymerization was performed. The membranes were characterized by contact angle measurement, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), tensile test, scanning electron microscopy (SEM) and atomic force microscopy (AFM). Oxygen transfer of modified membranes was also tested. The stability of grafted PEG was measured in water and in phosphate buffer saline (PBS) at 37°C. Blood compatibility of modified surfaces was evaluated by the platelet adhesion method. Water contact angel reduction from 110° to 72° demonstrates the enhanced hydrophilicity, and XPS results verify the presence of oxygenated functional groups due to the peak existence in 286 eV as a result of PEG grafting. The results clearly indicate that plasma graft-polymerization of PEG is an effective way for antifouling improvement of polypropylene membranes. Also, the results show that oxygen transfer changes in PEG grafted membranes are not significant.

  11. Oxidation of polyethylene implanted with low energy magnesium ions

    Energy Technology Data Exchange (ETDEWEB)

    Deslandes, Alec, E-mail: acd@ansto.gov.au [Australian Nuclear Science and Technology Organisation, Sydney (Australia); Ionescu, Mihail, E-mail: mio@ansto.gov.au [Australian Nuclear Science and Technology Organisation, Sydney (Australia); Karatchevtseva, Inna, E-mail: ikm@ansto.gov.au [Australian Nuclear Science and Technology Organisation, Sydney (Australia); Siegele, Rainer, E-mail: rns@ansto.gov.au [Australian Nuclear Science and Technology Organisation, Sydney (Australia); Cohen, David D., E-mail: dcz@ansto.gov.au [Australian Nuclear Science and Technology Organisation, Sydney (Australia)

    2013-07-15

    The oxidation of polyethylene implanted with low energy, i.e. 25–50 keV, Mg ions to fluences from 5 × 10{sup 12}–5 × 10{sup 16} ions/cm{sup 2} was studied. Rutherford back-scattering spectroscopy showed all implanted samples gained oxygen but the distribution did not match that of the implanted Mg. An increase in carbon content was also observed for the near-surface region. Depth profiles of hydrogen were obtained via elastic recoil detection analysis, showing that hydrogen was lost throughout and beyond the range of the Mg ions, producing unsaturated and chemically active sites available for oxidation. Fourier-transform infrared spectroscopy revealed the formation of carbon–oxygen bonding such as carbonyl groups, but showed no evidence of oxidised magnesium. Raman spectroscopy showed disordered and graphitic carbon bonding configurations were created by the irradiation, but no evidence of oxidised magnesium. The implantation of films to high fluence produced a carbonized surface-layer that made the irradiated polymer more resistant to oxidation.

  12. Giant Thermal Rectification from Polyethylene Nanofiber Thermal Diodes.

    Science.gov (United States)

    Zhang, Teng; Luo, Tengfei

    2015-09-01

    The realization of phononic computing is held hostage by the lack of high-performance thermal devices. Here, it is shown through theoretical analysis and molecular dynamics simulations that unprecedented thermal rectification factors (as large as 1.20) can be achieved utilizing the phase-dependent thermal conductivity of polyethylene nanofibers. More importantly, such high thermal rectifications only need very small temperature differences (rectification factors of the polymer nanofiber diodes range from 12 to 25-much larger than those of other thermal diodes (<8). The polymer nanofiber thermal diode consists of a crystalline portion whose thermal conductivity is highly phase-sensitive and a cross-linked portion which has a stable phase. Nanoscale size effect can be utilized to tune the phase transition temperature of the crystalline portion, enabling thermal diodes capable of operating at different temperatures. This work will be instrumental to the design of high performance, inexpensive, and easily processible thermal devices, based on which thermal circuits can be built to ultimately enable phononic computing.

  13. Antimony removal from the polyethylene terephthalate manufacture wastewater

    Directory of Open Access Journals (Sweden)

    Tomas Vengris

    2010-04-01

    Full Text Available In this study, antimony removal by coagulation from polyethylene terephthalate resin production wastewater of „Orion Global PET“ factory in Klaipėda city was investigated, with regard to the dependence of coagulant type and dosage, pH and presence of organics. FeCl3 ∙6H2O, FeSO4 ∙7H2O, AlCl3∙6H2O and TiCl4 salts were used as coagulants. Ti(IV and Fe(III revealed oneself to be the most effective coagulants. Antimony removal effectiveness is moderate and low using FeSO4 ∙7H2O and AlCl3∙6H2O coagulants, respectively. The addition of 10 mg dm-3 Ti(IV and 30 mg dm-3 Fe(III reduces by ~98% of the Sb, when the initial amount of Sb in wastewater is about 1200 mkg/l. The action of Fe(III is practically independent in the pH range 4-9, and that of Ti(IV slightly decreases in the same pH interval. The Sb amount in wastewater can be reduced to 13-20 mkg dm-3, while the initial Sb concentration is 1200 mkg dm-3. The presence of organic compounds in wastewater determines the reduction of Sb removal by coagulation.

  14. Molecular Dynamics Study of Polyethylene under Extreme Confinement

    Science.gov (United States)

    Kritikos, G.; Sgouros, A.; Vogiatzis, G. G.; Theodorou, D. N.

    2016-08-01

    We present results concerning the dynamics and the structure of adsorbed layers of molten polyethylene (PE) between two graphite surfaces. The molecular weight of the monodisperse PE chains reaches the entanglement regime. We study three cases of interwall distances, equal to two, three and four times the unperturbed radius of gyration (Rg ) of PE chains. The confined system is equilibrated by use of efficient Monte Carlo (MC) algorithms. Conducting molecular dynamics (MD) simulations, we reveal the distribution of relaxation times as a function of distance from the graphite walls at the temperature of 450 K. From the atomic-level stresses we calculate a realistic estimate of the adhesion tension, which is not affected significantly by the width of the pore. Although the distance between the two walls is comparable to the width of the adsorbed layer, we do not record the formation of ‘glassy bridges’ under the studied conditions. The diffusion of polymer chains in the middle layer is not inhibited by the existence of the two adsorbed layers. Extreme confinement conditions imposed by the long range wall potentials bring about an increase in both the adsorption and desorption rates of chains. The presented results seem to cohere with a reduction in the calorimetric (heat capacity step) glass transition temperature (Tg ).

  15. Protein diffusion in photopolymerized poly(ethylene glycol) hydrogel networks

    Energy Technology Data Exchange (ETDEWEB)

    Engberg, Kristin; Frank, Curtis W, E-mail: curt.frank@stanford.edu [Department of Chemical Engineering, Stanford University, 381 North-South Mall, Stauffer III, Stanford, CA 94305 (United States)

    2011-10-15

    In this study, protein diffusion through swollen hydrogel networks prepared from end-linked poly(ethylene glycol)-diacrylate (PEG-DA) was investigated. Hydrogels were prepared via photopolymerization from PEG-DA macromonomer solutions of two molecular weights, 4600 Da and 8000 Da, with three initial solid contents: 20, 33 and 50 wt/wt% PEG. Diffusion coefficients for myoglobin traveling across the hydrogel membrane were determined for all PEG network compositions. The diffusion coefficient depended on PEG molecular weight and initial solid content, with the slowest diffusion occurring through lower molecular weight, high-solid-content networks (D{sub gel} = 0.16 {+-} 0.02 x 10{sup -8} cm{sup 2} s{sup -1}) and the fastest diffusion occurring through higher molecular weight, low-solid-content networks (D{sub gel} = 11.05 {+-} 0.43 x 10{sup -8} cm{sup 2} s{sup -1}). Myoglobin diffusion coefficients increased linearly with the increase of water content within the hydrogels. The permeability of three larger model proteins (horseradish peroxidase, bovine serum albumin and immunoglobulin G) through PEG(8000) hydrogel membranes was also examined, with the observation that globular molecules as large as 10.7 nm in hydrodynamic diameter can diffuse through the PEG network. Protein diffusion coefficients within the PEG hydrogels ranged from one to two orders of magnitude lower than the diffusion coefficients in free water. Network defects were determined to be a significant contributing factor to the observed protein diffusion.

  16. Neutron radiation effect on carbon-loaded polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Ervedosa, Eduardo P.; Santos, Luiz A.P., E-mail: lasantos@cnen.gov.br, E-mail: eduardoervedosa@hotmail.com [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil); Genezini, Frederico A., E-mail: fredzini@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    This work aims to study the changes in the electrical conductivity of carbon-loaded polyethylene after neutron irradiation. The material is a polymer-based semiconductor and it was used to evaluate the neutron flux in a research nuclear reactor. The main advantage with this type of semiconductor concerns about that the composite itself is not a material that bring high neutron activation. Such a feature could allow for measuring the neutron flux in real time with the advantage that it is a low cost material. Samples in triplicate with identical geometries were prepared and irradiated at different time intervals in order to evaluate the material response to neutron radiation in function of its electrical property. The method of measurement is based on the voltage yielded when a high precision ultra-low constant current is passing through the material. The results show that if this polymer based semiconductor is submitted to a neutron flux from a nuclear reactor it presents a systematic variation in its electrical resistance and one can conclude that this material can be used as a neutron sensor. (author)

  17. Biodegradation of polyethylene microplastics by the marine fungus Zalerion maritimum.

    Science.gov (United States)

    Paço, Ana; Duarte, Kátia; da Costa, João P; Santos, Patrícia S M; Pereira, R; Pereira, M E; Freitas, Ana C; Duarte, Armando C; Rocha-Santos, Teresa A P

    2017-05-15

    Plastic yearly production has surpassed the 300milliontons mark and recycling has all but failed in constituting a viable solution for the disposal of plastic waste. As these materials continue to accumulate in the environment, namely, in rivers and oceans, in the form of macro-, meso-, micro- and nanoplastics, it becomes of the utmost urgency to find new ways to curtail this environmental threat. Multiple efforts have been made to identify and isolate microorganisms capable of utilizing synthetic polymers and recent results point towards the viability of a solution for this problem based on the biodegradation of plastics resorting to selected microbial strains. Herein, the response of the fungus Zalerion maritimum to different times of exposition to polyethylene (PE) pellets, in a minimum growth medium, was evaluated, based on the quantified mass differences in both the fungus and the microplastic pellets used. Additionally, molecular changes were assessed through attenuated total reflectance Fourier transform Infrared Spectroscopy (FTIR-ATR) and Nuclear Magnetic Resonance (NMR). Results showed that, under the tested conditions, Z. maritimum is capable of utilizing PE, resulting in the decrease, in both mass and size, of the pellets. These results indicate that this naturally occurring fungus may actively contribute to the biodegradation of microplastics, requiring minimum nutrients.

  18. Effect of substrates on crystallization of high density polyethylene

    Institute of Scientific and Technical Information of China (English)

    范毓润; 林渊; 阮绵照

    2008-01-01

    The experimental observations about remarkable influence of the substrates on the isothermal crystallization rate of a high density polyethylene(HDPE) were presented.Two methods were used to characterize the crystallization rate:the change of turbidity of the HDPE specimen and the changes of the complex viscosity and storage modulus measured by a rotational rheometer,which gave consistent results showing that the isothermal crystallization rate decreased in sequence as the specimen contacted with aluminum,brass and stainless steel plates,respectively.As to the dominant influence factor,the chemical composition of the substrates can be excluded via insulating the plate by an aluminum foil.Instead,we propose the plate’s ability of removing the latent heat of crystallization from the specimen.Rheological measurement is sensitive to the crystallization process.The colloid like model proposed by BOUTAHAR et al for the crystallization of HDPE gives reasonable predictions of the crystallized fraction from the measured storage modulus.

  19. Radiation crosslinking of ultra high molecular weigh polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Phil Hyun; Nho, Young Chang [KAERI, Taejon (Korea, Republic of)

    2000-05-01

    The effect of {gamma}-irradiation on the thermal and mechanical properties of ultra high molecular weight polyethylene (UHMWPE) used in orthopedic implants was investigated. UHMWPE was recrystallized with different cooling conditions for the purpose of enhancing the crosslinking extent of the polymer after {gamma}-irradiation. UHMWPE was irradiated with gamma ray to a dosage of 10 kGy to 500 kGy in air and nitrogen atmosphere. Differential scanning calorimetry, tensile characterization, creep deformity and wear were examined to determine the mechanical properties of the irradiated UHMWPE specimens. The crystallinity of the irradiated samples was increased with irradiation dose. The irradiated UHMWPE after recrystallization in a quenching condition had a higher crosslinking extent compared with the irradiated UHMWPE after slowly cooling. The irradiated UHMWPE after quenching had a lower wear rate than the irradiated UHMWPE after recrystallization in a slowly cooling condition, and the wear rate of UHMWPE decreased with irradiation dose up to 250kGy, which showed about 40% of the wear rate of nonirradiated UHMWPE.

  20. Protein Adsorption on Various Plasma-Treated Polyethylene Terephthalate Substrates

    Directory of Open Access Journals (Sweden)

    Karin Stana-Kleinschek

    2013-10-01

    Full Text Available Protein adhesion and cell response to plasma-treated polymer surfaces were studied. The polymer polyethylene terephthalate (PET was treated in either an oxygen plasma to make the surface hydrophilic, or a tetrafluoromethane CF4 plasma to make the surface hydrophobic. The plasma source was radiofrequency (RF discharge. The adsorption of albumin and other proteins from a cell-culture medium onto these surfaces was studied using a quartz crystal microbalance (QCM, X-ray photoelectron spectroscopy (XPS and atomic force microscopy (AFM. The cellular response to plasma-treated surfaces was studied as well using an MTT assay and scanning electron microscopy (SEM. The fastest adsorption rate was found on the hydrophilic oxygen plasma-treated sample, and the lowest was found on the pristine untreated sample. Additionally, the amount of adsorbed proteins was higher for the oxygen-plasma-treated surface, and the adsorbed layer was more viscoelastic. In addition, cell adhesion studies support this finding because the best cell adhesion was observed on oxygen-plasma-treated substrates.

  1. Cell adhesion and proliferation on polyethylene grafted with Au nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Kasalkova, N. Slepickova [Department of Solid State Engineering, Institute of Chemical Technology, 166 28 Prague (Czech Republic); Slepicka, P., E-mail: petr.slepicka@vscht.cz [Department of Solid State Engineering, Institute of Chemical Technology, 166 28 Prague (Czech Republic); Kolska, Z. [Department of Chemistry, J.E. Purkyne University, 400 96 Usti nad Labem (Czech Republic); Sajdl, P. [Department of Power Engineering, Institute of Chemical Technology, 166 28 Prague (Czech Republic); Bacakova, L. [Institute of Physiology, Academy of Sciences of the Czech Republic 142 20 Prague (Czech Republic); Rimpelova, S. [Department of Biochemistry and Microbiology, Institute of Chemical Technology Prague, Prague (Czech Republic); Svorcik, V. [Department of Solid State Engineering, Institute of Chemical Technology, 166 28 Prague (Czech Republic)

    2012-02-01

    Plasma treatment and subsequent Au nano-particles grafting of polyethylene (PE) lead to changes in surface morphology, roughness and wettability, significantly increasing the attractiveness of the material for cells. The PE samples were exposed to argon plasma. Plasma modified PE was chemically grafted by immersion to biphenyldithiol and consequently into solution of Au nano-particles. Changes in chemical structure of the modified PE were studied using X-ray Photoelectron Spectroscopy (XPS) and electrokinetic analysis ({zeta}-potential). The surface wettability of the modified PE samples was examined by measurement of the contact angle by standard goniometry. The surface morphology of the plasma modified PE and that grafted with Au nano-particles was studied by Atomic Force Microscopy (AFM). The modified PE samples were seeded with rat vascular smooth muscle cells (VSMCs) and their adhesion and proliferation were studied. Chemically bounded biphenyldithiol increases the number of the incorporated gold nano-particles and changes sample surface properties. The presence of the biphenyldithiol and the gold nano-particles on the PE surface influences dramatically adhesion and proliferation of VSMCs.

  2. Cell adhesion and proliferation on polyethylene grafted with Au nanoparticles

    Science.gov (United States)

    Kasálková, N. Slepičková; Slepička, P.; Kolská, Z.; Sajdl, P.; Bačáková, L.; Rimpelová, S.; Švorčík, V.

    2012-02-01

    Plasma treatment and subsequent Au nano-particles grafting of polyethylene (PE) lead to changes in surface morphology, roughness and wettability, significantly increasing the attractiveness of the material for cells. The PE samples were exposed to argon plasma. Plasma modified PE was chemically grafted by immersion to biphenyldithiol and consequently into solution of Au nano-particles. Changes in chemical structure of the modified PE were studied using X-ray Photoelectron Spectroscopy (XPS) and electrokinetic analysis ( ζ-potential). The surface wettability of the modified PE samples was examined by measurement of the contact angle by standard goniometry. The surface morphology of the plasma modified PE and that grafted with Au nano-particles was studied by Atomic Force Microscopy (AFM). The modified PE samples were seeded with rat vascular smooth muscle cells (VSMCs) and their adhesion and proliferation were studied. Chemically bounded biphenyldithiol increases the number of the incorporated gold nano-particles and changes sample surface properties. The presence of the biphenyldithiol and the gold nano-particles on the PE surface influences dramatically adhesion and proliferation of VSMCs.

  3. Stability of β-carotene in polyethylene oxide electrospun nanofibers

    Science.gov (United States)

    Peinado, I.; Mason, M.; Romano, A.; Biasioli, F.; Scampicchio, M.

    2016-05-01

    β-carotene (βc) was successfully incorporated into electrospun nanofibers of poly-(ethylene oxide) (PEO) with the aim of prolonging its shelf life and thermal stability. The physical and thermal properties of the βc-PEO-nanofibers were determined by scanning electron microscopy (SEM), color analysis, and differential scanning calorimetry (DSC). The nanofibers of PEO and βc-PEO exhibited average fiber diameters of 320 ± 46 and 230 ± 21 nm, with colorimetric coordinates L* = 95.7 ± 2.4 and 89.4 ± 4.6 and b* = -0.5 ± 0.1 and 6.2 ± 3.0 respectively. Thermogravimetric analysis coupled with Proton Transfer-Mass Spectroscopy (TGA/PTR-ms) demonstrated that coated βc inside PEO nanofibers increased thermal stability when compared to standard βc in powder form. In addition, β-carotene in the membranes showed higher stability during storage when compared with β-carotene in solution with a decrease in concentration of 57 ± 4% and 70 ± 2% respectively, thus should extend the shelf life of this compound. Also, TGA coupled with PTR-MS resulted in a promising technique to online-monitoring thermal degradation.

  4. Biological properties of adrenomedullin conjugated with polyethylene glycol.

    Science.gov (United States)

    Kubo, Keishi; Tokashiki, Mariko; Kuwasako, Kenji; Tamura, Masaji; Tsuda, Shugo; Kubo, Shigeru; Yoshizawa-Kumagaye, Kumiko; Kato, Johji; Kitamura, Kazuo

    2014-07-01

    Adrenomedullin (AM) is a vasodilator peptide with pleiotropic effects, including cardiovascular protection and anti-inflammation. Because of these beneficial effects, AM appears to be a promising therapeutic tool for human diseases, while intravenous injection of AM stimulates sympathetic nerve activity due to short-acting potent vasodilation, resulting in increased heart rate and renin secretion. To lessen these acute reactions, we conjugated the N-terminal of human AM peptide with polyethylene glycol (PEG), and examined the biological properties of PEGylated AM in the present study. PEGylated AM stimulated cAMP production, an intracellular second messenger of AM, in cultured human embryonic kidney cells expressing a specific AM receptor in a dose-dependent manner, as did native human AM. The pEC50 value of PEGylated AM was lower than human AM, but no difference was noted in maximum response (Emax) between the PEGylated and native peptides. Intravenous bolus injection of 10nmol/kg PEGylated AM lowered blood pressure in anesthetized rats, but the acute reduction became significantly smaller by PEGylation as compared with native AM. Plasma half-life of PEGylated AM was significantly longer than native AM both in the first and second phases in rats. In summary, N-terminal PEGylated AM stimulated cAMP production in vitro, showing lessened acute hypotensive action and a prolonged plasma half-life in comparison with native AM peptide in vivo.

  5. Surface Properties of Cell-treated Polyethylene Terephthalate

    Directory of Open Access Journals (Sweden)

    Bing Shi

    2006-01-01

    Full Text Available The materials used in artificial joints undergo degradation through fatigue and corrosive wear in human body. The lifetime for well-designed artificial joints like hip joints is at most 12 years and a patient will usually have two total joint replacements during his/her lifetime. Tissue engineering, an alternative to total joint implantation, is the replacement of damaged tissue with the tissue that is designed and constructed to meet the needs of the individual patient. In this study, polyethylene terephthalate (PET in the form of overhead transparency films were investigated on their cell interactions and the tribological properties as an alternative tissue-engineering matrix. The base material of the transparency films is PET. Cell culture methods as well as atomic force microscope (AFM, contact angle goniometer, confocal microscope and universal tribotester were used to study the properties of the substrate materials and the interactions between the surface and the substrate materials. Results showed that cells grew on the substrate of the base materials of the PET. The tribological properties of the slides have been changed after being cell-treated.

  6. Mechanisms of lithium transport in amorphous polyethylene oxide

    Science.gov (United States)

    Duan, Yuhua; Halley, J. W.; Curtiss, Larry; Redfern, Paul

    2005-02-01

    We report calculations using a previously reported model of lithium perchlorate in polyethylene oxide in order to understand the mechanism of lithium transport in these systems. Using an algorithm suggested by Voter, we find results for the diffusion rate which are quite close to experimental values. By analysis of the individual events in which large lithium motions occur during short times, we find that no single type of rearrangement of the lithium environment characterizes these events. We estimate the free energies of the lithium ion as a function of position during these events by calculation of potentials of mean force and thus derive an approximate map of the free energy as a function of lithium position during these events. The results are consistent with a Marcus-like picture in which the system slowly climbs a free energy barrier dominated by rearrangement of the polymer around the lithium ions, after which the lithium moves very quickly to a new position. Reducing the torsion forces in the model causes the diffusion rates to increase.

  7. Polyethylene laser welding based on optical absorption variations

    Science.gov (United States)

    Galtieri, G.; Visco, A.; Nocita, D.; Torrisi, L.; Ceccio, G.; Scolaro, C.

    2016-04-01

    Polymeric materials, both pure and containing nanostructures, can be prepared as thin sheets in order to produce joints with an interface between an optically transparent sheet and an optically absorbent substrate to be welded by infrared pulsed laser irradiation. The Laser Transmission Welding (LTW) technique has been successfully applied in order to join two or more thermoplastic polymeric sheets that must have a similar chemical composition. In this research work, polymeric joints of Ultra High Molecular Weight Polyethylene sheets were realized, characterized and welded. Some polymer sheets were doped, at different concentrations, with carbon nano-particles absorbent the laser radiation. A pulsed laser operating in the wavelength region 532 nm with intensity of the order of 109 Watt/cm2 was employed to be transmitted by the transparent polymer and to be absorbed by the carbon enriched surface. At the interface of the two polymers the released energy induces melting, that is assisted by pressure, producing a fast and resistant welding zone. Mechanical and optical characterizations and surface analyses are presented and discussed.

  8. Polymeric cracking of waste polyethylene terephthalate to chemicals and energy.

    Science.gov (United States)

    Brems, Anke; Baeyens, Jan; Vandecasteele, Carlo; Dewil, Raf

    2011-07-01

    Polyethylene terephthalate (PET) is a widely used thermoplastic. PET residues represent on average 7.6 wt% of the different polymer wastes in Europe. Pyrolysis of these wastes is attracting increasing interest, and PET is a potential candidate for this thermal process. The paper measures and discusses the kinetics of the pyrolysis reaction in terms of the reaction rate constants as determined by dynamic thermogravimetric analysis, with special emphasis on the required heating rate to obtain relevant results. The product yields and compositions are also determined. Gaseous products represent 16-18 wt%. The amounts of condensables and carbonaceous residue are a function of the operating mode, with slow pyrolysis producing up to 24 wt% of carbonaceous residue. Major condensable components are benzoic acid, monovinyl terephthalate, divinyl terephthalate, vinyl benzoate, and benzene. The present paper complements previous literature findings by (1) the study of the influence of the heating rate on the reaction kinetics in dynamic pyrolysis tests, (2) the isothermal investigation in a fluidized bed reactor to pyrolyze PET, and (3) the assessment of upgrading and recovery of the products. The paper concludes with a proposed reactor recommendation for PET pyrolysis, in either the bubbling or circulating fluidized bed operating mode.

  9. Mechanistic insights into acyclovir-polyethylene glycol 20000 binary dispersions

    Science.gov (United States)

    Venkateskumar, Krishnamoorthy; Parasuraman, Subramani; Gunasunderi, Raju; Sureshkumar, Krishnan; Nayak, M. Muralidhar; Shah, Syed Adnan Ali; Kassen, Khoo; Kai, Heng Wei

    2016-01-01

    Objective: The objective of this study is to provide a mechanistic insight into solubility enhancement and dissolution of acyclovir (ACY) by polyethylene glycol20000 (PEG20000). Materials and Methods: Solid dispersions with differing ratios of drug (ACY) and carrier (PEG20000) were prepared and evaluated by phase solubility, in vitro release studies, kinetic analysis, in situ perfusion, and in vitro permeation studies. Solid state characterization was also done by Powder X-Ray Diffraction (PXRD), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared spectroscopy (FT-IR) analysis and surface morphology was assessed by Polarizing Microscopic Image (PMI) analysis, Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and Nuclear Magnetic Resonance (NMR) analysis. Results: Thermodynamic parameters proved the solubilization effect of carrier. The aqueous solubility and dissolution of ACY were increased in all samples. Formation of solid solution, crystallinity reduction, and absence of interaction between drug and carrier was proved by XRD, DSC, and FTIR analysis. The particle size reduction and change in surface morphology were confirmed by SEM and AFM and analysis. The permeation coefficient and amount of drug diffused was higher in samples as compared to ACY. The stability was high in dispersions, and it was proved by NMR analysis. Conclusion: The mechanical insights into the enhancement of solubility and dissolution could be used as a platform to improve the aqueous solubility for other poor water soluble drugs. PMID:28123988

  10. Ultralow energy ion beam surface modification of low density polyethylene.

    Science.gov (United States)

    Shenton, Martyn J; Bradley, James W; van den Berg, Jaap A; Armour, David G; Stevens, Gary C

    2005-12-01

    Ultralow energy Ar+ and O+ ion beam irradiation of low density polyethylene has been carried out under controlled dose and monoenergetic conditions. XPS of Ar+-treated surfaces exposed to ambient atmosphere show that the bombardment of 50 eV Ar+ ions at a total dose of 10(16) cm(-2) gives rise to very reactive surfaces with oxygen incorporation at about 50% of the species present in the upper surface layer. Using pure O+ beam irradiation, comparatively low O incorporation is achieved without exposure to atmosphere (approximately 13% O in the upper surface). However, if the surface is activated by Ar+ pretreatment, then large oxygen contents can be achieved under subsequent O+ irradiation (up to 48% O). The results show that for very low energy (20 eV) oxygen ions there is a dose threshold of about 5 x 10(15) cm(-2) before surface oxygen incorporation is observed. It appears that, for both Ar+ and O+ ions in this regime, the degree of surface modification is only very weakly dependent on the ion energy. The results suggest that in the nonequilibrium plasma treatment of polymers, where the ion flux is typically 10(18) m(-2) s(-1), low energy ions (<50 eV) may be responsible for surface chemical modification.

  11. Unraveling the luminescence signatures of chemical defects in polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Lihua; Tran, Huan Doan; Wang, Chenchen; Ramprasad, Rampi, E-mail: rampi.ramprasad@uconn.edu [Department of Materials Science and Engineering, Institute of Materials Science, University of Connecticut, 97 North Eagleville Road, Storrs, Connecticut 06269 (United States)

    2015-09-28

    Chemical defects in polyethylene (PE) can deleteriously downgrade its electrical properties and performance. Although these defects usually leave spectroscopic signatures in terms of characteristic luminescence peaks, it is nontrivial to make unambiguous assignments of the peaks to specific defect types. In this work, we go beyond traditional density functional theory calculations to determine intra-defect state transition and charge recombination process derived emission and absorption energies in PE. By calculating the total energy differences of the neutral defect at excited and ground states, the emission energies from intra-defect state transition are obtained, reasonably explaining the photoluminescence peaks in PE. In order to study the luminescence emitted in charge recombination processes, we characterize PE defect levels in terms of thermodynamic and optical charge transition levels that involve total energy calculations of neutral and charged defects. Calculations are performed at several levels of theory including those involving (semi)local and hybrid electron exchange-correlation functionals, and many-body perturbation theory. With these critical elements, the emission energies are computed and further used to clarify and confirm the origins of the observed electroluminescence and thermoluminescence peaks.

  12. Sorption of pharmaceuticals and personal care products to polyethylene debris.

    Science.gov (United States)

    Wu, Chenxi; Zhang, Kai; Huang, Xiaolong; Liu, Jiantong

    2016-05-01

    Presence of plastic debris in marine and freshwater ecosystems is increasingly reported. Previous research suggested plastic debris had a strong affiliation for many pollutants, such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and heavy metals. In this study, the sorption behavior of pharmaceuticals and personal care products (PPCPs), including carbamazepine (CBZ), 4-methylbenzylidene camphor (4MBC), triclosan (TCS), and 17α-ethinyl estradiol (EE2), to polyethylene (PE) debris (250 to 280 μm) was investigated. The estimated linear sorption coefficients (K d) are 191.4, 311.5, 5140, and 53,225 L/kg for CBZ, EE2, TCS, and 4MBC, and are related to their hydrophobicities. Increase of salinity from 0.05 to 3.5 % did not affect the sorption of 4MBC, CBZ, and EE2 but enhanced the sorption of TCS, likely due to the salting-out effect. Increase of dissolved organic matter (DOM) content using Aldrich humic acid (HA) as a proxy reduced the sorption of 4MBC, EE2, and TCS, all of which show a relatively strong affiliation to HA. Results from this work suggest that microplastics may play an important role in the fate and transport of PPCPs, especially for those hydrophobic ones.

  13. Preliminary investigation of a polyethylene glycol hydrogel "nerve glue"

    Directory of Open Access Journals (Sweden)

    McDaniel Candice

    2009-09-01

    Full Text Available Abstract Background Polyethylene glycol (PEG hydrogel is a biocompatible semi-adherent gel like substance that can potentially augment nerve repair much like a fibrin sealant. Potential advantages of this substance include fast preparation and set up time, as well as adhesion inhibiting properties. The purpose of this study was to perform an initial evaluation of PEG hydrogel in this application. Methods The sciatic nerves of 29 rats were transected and repaired using two 10-0 nylon sutures and either PEG hydrogel or fibrin glue. After 10 weeks, contraction forces of the reinnervated muscles were evaluated and histological assessment of scar tissue performed. Results Muscle strength testing revealed the average ratio of experimental to control sides for the fibrin glue group was 0.75 and for the PEG hydrogel group was 0.72 (no significant difference. Longitudinal sections through the nerve repair site showed no significant difference in nerve diameter but did demonstrate a significant reduction in scar thickness in the PEG hydrogel group (p Conclusion Though further study is necessary to fully evaluate, PEG hydrogel results in less scar tissue formation and equivalent muscle recovery as fibrin sealant when applied as a nerve glue in a rodent sciatic nerve repair model.

  14. Mechanical behavior of recycled polyethylene/piassava fiber composites

    Energy Technology Data Exchange (ETDEWEB)

    Elzubair, Amal, E-mail: amal@metalmat.ufrj.br [Universidade Federal de Rio de Janeiro, Departamento de Engenharia Metalurgica e de Materiais, Ilha do Fundao, Bloco F, 21941-972 Rio de Janeiro, RJ (Brazil); Praca General Tiburcio, 80, Urca, 22290-270 Rio de Janeiro, RJ (Brazil); Miguez Suarez, Joao Carlos, E-mail: jmiguez@ime.eb.br [Instituto Militar de Engenharia, Secao de Engenharia Mecanica e de Materiais, Praca General Tiburcio, 80, Urca, 22290-270, Rio de Janeiro, RJ (Brazil); Praca General Tiburcio, 80, Urca, 22290-270 Rio de Janeiro, RJ (Brazil)

    2012-11-15

    The use of natural fibers for reinforcement of thermoplastics (which are found in domestic waste) is desirable since it is based on abundant and renewable resources and can be ecologically correct. Leopoldinia piassaba Wallace (commonly known as piassava), a palm tree native of Amazon-Brazil, is cheap, easily found in Brazilian markets and the main component of home appliances and decorative goods. The subject of the present work is a study of mechanical properties of composites of recycled high density polyethylene (HDPE-r) reinforced with untreated, and treated (silane and NaOH) piassava fibers, in proportions varying from 0% to 20% and injection molded under fixed processing conditions. The influence of increasing amounts of piassava fibers and of surface treatment on the mechanical behavior of the composites was investigated by thermogravimetric analysis (TGA), mechanical testing (tensile and flexure) and scanning electron microscopy (SEM). The topography of the fractured surfaces of tested tensile specimens of unfilled and filled recycled HDPE was also observed by SEM and correlated with the mechanical behavior. As the fiber content increases, the composites show a gradual change in the mechanical properties and in the fracture mechanisms. Composites with 15% and 20% of piassava fibers were found to exhibit the best mechanical performance.

  15. Properties of recycled high density polyethylene and coffee dregs composites

    Directory of Open Access Journals (Sweden)

    Sibele Piedade Cestari

    2013-01-01

    Full Text Available Composites of recycled high density polyethylene (HDPE-R and coffee dregs (COFD were elaborated. The blends were made at the proportions of 100-0, 90-10, 80-20, 70-30, 60-40, 50-50 and 40-60% polymer-filler ratio. The materials were evaluated through scanning electron microscopy (SEM, differential scanning calorimetry (DSC, thermogravimetry/derivative thermogravimetry (TGA, and compressive resistance test. The compounding was done using a two-stage co-kneader system extruder, and then cylindrical specimens were injection molded. All composites had a fine dispersion of the COFD into the polymeric matrix. The composites degraded in two steps. The first one was in a temperature lower than the neat HDPE, but higher than the average processing temperature of the polymer. The melting temperature and the degree of crystallinity of the composites resulted similar to the neat HDPE ones. The compressive moduli of the composites resulted similar to the neat polymer one. The results show that these composites have interesting properties as a building material.

  16. Delamination toughness of ultra high molecular weight polyethylene (UHMWPE composites

    Directory of Open Access Journals (Sweden)

    Casas-Rodriguez J.P.

    2012-08-01

    Full Text Available Ultra high molecular weight polyethylene (UHMWPE fibre reinforced composites are an important group of material for armours solutions, where their unique combination of properties could be utilized. A commonly observed failure mode in this kind of unidirectional laminated composites under impact ballistic is delamination between the composite layers. In the present study, an investigation on the delamination toughness behaviour exhibited by UHMWPE composites laminated was made. The interlaminar Mode II critical strain energy release rates of (UHMWPE fibre reinforced composites were characterized using the End Notch Flexural (ENF test. Critical strain energy release rate was obtained from the load – deflection test data using the beam theory expression. It was found that the energy release rate of the composite exhibited a very low value of around 60J/m2 using a moulding pressure of approximately 1200 psi. In order to analyse the delamination resistance of composite, the effects of changing the manufacture process variables and the use of a thermoplastic adhesive film in the composites were investigated. The composite laminates were produced by hot compressing moulding using a film-stacking procedure. It was found that the damage resistance of the UHMWPE composite was influenced by the manufacture method, which affects the Mode II interlaminar fracture toughness and the ballistic response of composites.

  17. OLEOPHOBIC AND HYDROPHOBIC FEATURE EXPERIMENTS OF FLUORINATED HIGH DENSITY POLYETHYLENE

    Institute of Scientific and Technical Information of China (English)

    杨宏伟; 魏贤勇; 费逸伟; 孙世安; 李晓越

    2013-01-01

    The surface performances of directly fluorinated high density polyethylene (HDPE) are studied with Fourier transform infrared (FT-IR) spectra ,scanning electron microscopy (SEM) and contact angle (CA) system . The SEM images show that there is a three-layer structure called the reaction ,virgin and boundary layer structure . The depth of fluorinated layer is 5.75 μm with 1 h fluorination time and 7.86 μm with 2 h . The depths are 5.46 μm and 5.07 μm when fluorine density is 2% and 1% ,respectively .CA indicates that the HDPE surface property becomes more hydrophobic with the increasing water contact angle from 78.5° to 104.5° .Oleophobic and hydrophobic features of HDPE are identified by comparison of mass change experiments .It is shown that the in-crement rate of fluorinated HDPE is much lower than that of un-fluorinated HDPE filled in neither distilled water nor jet fuel .

  18. Nanocomposites Based on Polyethylene and Nanocrystalline Silicon Films

    Directory of Open Access Journals (Sweden)

    Olkhov Anatoliy Aleksandrovich

    2014-12-01

    Full Text Available High-strength polyethylene films containing 0.5-1.0 wt. % of nanocrystalline silicon (nc-Si were synthesized. Samples of nc-Si with an average core diameter of 7-10 nm were produced by plasmochemical method and by laser-induced decomposition of monosilane. Spectral studies revealed almost complete (up to ~95 % absorption of UV radiation in 200- 400 nm spectral region by 85 micron thick film if the nc-Si content approaches to 1.0 wt. %. The density function of particle size in the starting powders and polymer films containing immobilized silicon nanocrystallites were obtained using the modeling a complete profile of X-ray diffraction patterns, assuming spherical grains and the lognormal distribution. The results of X-ray analysis shown that the crystallite size distribution function remains almost unchanged and the crystallinity of the original polymer increases to about 10 % with the implantation of the initial nc-Si samples in the polymer matrix.

  19. Fatigue crack propagation behavior of ultrahigh molecular weight polyethylene.

    Science.gov (United States)

    Connelly, G M; Rimnac, C M; Wright, T M; Hertzberg, R W; Manson, J A

    1984-01-01

    The relative fatigue crack propagation resistance of plain and carbon fiber-reinforced ultrahigh molecular weight polyethylene (UHMWPE) was determined from cyclic loading tests performed on compact tension specimens machined from the tibial components of total knee prostheses. Both materials were characterized by dynamic mechanical spectroscopy, X-ray diffraction, and differential scanning calorimetry. The cyclic tests used loading in laboratory air at 5 Hz using a sinusoidal wave form. Dynamic mechanical spectroscopy showed that the reinforced UHMWPE had a higher elastic storage modulus than the plain UHMWPE, whereas X-ray diffraction and differential scanning calorimetry showed that the percent crystallinity and degree of order in the crystalline regions were similar for the two materials. Fatigue crack propagation in both materials proved to be very sensitive to small changes in the applied cyclic stress intensity range. A 10% increase in stress intensity resulted in approximately an order of magnitude increase in fatigue crack growth rate. The fatigue crack propagation resistance of the reinforced UHMWPE was found to be significantly worse than that of the plain UHMWPE. This result was attributed to poor bonding between the carbon fibers and the UHMWPE matrix and the ductile nature of the matrix itself.

  20. Collagen immobilization on polyethylene terephthalate surface after helium plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Aflori, Magdalena, E-mail: maflori@icmpp.ro [Department of Polymers Physics and Polymeric Materials, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi (Romania); Drobota, Mioara [Department of Polymers Physics and Polymeric Materials, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi (Romania); Dimitriu, Dan Gh. [Faculty of Physics, “Alexandru Ioan Cuza” University, 20A Bulevardul Carol I, 700505 Iasi (Romania); Stoica, Iuliana [Department of Polymers Physics and Polymeric Materials, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi (Romania); Simionescu, Bogdana [Department of Polymers Physics and Polymeric Materials, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi (Romania); “Costin D. Nenitescu” Centre of Organic Chemistry, 202B Splaiul Independentei, 71141 Bucharest (Romania); Harabagiu, Valeria [Department of Polymers Physics and Polymeric Materials, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi (Romania)

    2013-11-20

    An attractive alternative to add new functionalities such as biocompatibility due to the micro- and nano-scaled modification of polymer surfaces is offered by plasma processing. Many vital processes of tissue repair and growth following injuries depend on the rate of adsorption and self-assembling of the collagen molecules at the interfaces. Consequently, besides the amount of protein, it is necessary to investigate the form in which the collagen molecules are organizing on the polymer surface. In this study, direct current (DC) helium plasma treatment was used in order to obtain poly(ethylene terephthalate) (PET) films with different amounts of collagen and different shapes of aggregates formed from the collagen molecules. The immobilization of collagen on PET surface was confirmed by XPS measurements, an increase of the nitrogen content by increasing the plasma exposure time being recorded. The SEM and AFM measurements revealed the presence of grains and dendrites of collagen formed on the polymer surface. At 15 min plasma treatment time, the polymer surface after collagen immobilization has a homogenous topography. Usually, one can find fibrils, coil or dendrimers of collagen formed in buffer solutions and immobilized on different polymer surfaces. On the other hand, in this particular configuration, the combination of DC plasma and helium gas as a PET functionalization tool is an original one. As the collagen is not covalently immobilized on the surfaces, it may interact with the cell culture medium proteins, part of the collagen might being replaced by other serum proteins.

  1. Degradation of polyethylene glycol by Fenton reaction: a comparative study.

    Science.gov (United States)

    Haseneder, R; Fdez-Navamuel, B; Härtel, G

    2007-01-01

    Photochemical advanced oxidation processes (AOPs) utilising different Fenton systems were investigated in laboratory-scale experiments for the degradation of polyethylene glycol (PEG). The results of the study showed that the degradation rate of PEG was strongly accelerated by the homogeneous system, and this proved to be advantageous in comparison to the heterogeneous system. Between Fenton and photo-Fenton heterogeneous systems, the photo-Fenton process reached the highest removal rate of the organic compound, due to the enhanced reduction efficiency of Fe(III) to Fe(II) under UV-irradiation. The oxidation rate in the heterogeneous system was investigated using varying different parameters, such as the pH value, the concentration of hydrogen peroxide and the amount of Fe(OH)3 as the catalyst. For the homogeneous Fenton system the rate of degradation is significantly higher. At the same time of operation the elimination rates can be found to be 30% over the rates of the heterogeneous system. Optimising the typical influence parameters mentioned before, a degradation of about 93% of PEG can be achieved by using the homogeneous Fenton system.

  2. Separation of polyethylene glycols and amino-terminated polyethylene glycols by high-performance liquid chromatography under near critical conditions.

    Science.gov (United States)

    Wei, Y-Z; Zhuo, R-X; Jiang, X-L

    2016-05-20

    The separation and characterization of polyethylene glycols (PEGs) and amino-substituted derivatives on common silica-based reversed-phase packing columns using isocratic elution is described. This separation is achieved by liquid chromatography under the near critical conditions (LCCC), based on the number of amino functional end groups without obvious effect of molar mass for PEGs. The mobile phase is acetonitrile in water with an optimal ammonium acetate buffer. The separation mechanism of PEG and amino-substituted PEG under the near LCCC on silica-based packing columns is confirmed to be ion-exchange interaction. Under the LCCC of PEG backbone, with fine tune of buffer concentration, the retention factor ratios for benzylamine and phenol in buffered mobile phases, α(benzylamine/phenol)-values, were used to assess the ion-exchange capacity on silica-based reversed-phase packing columns. To the best of our knowledge, this is the first report on separation of amino-functional PEGs independent of the molar mass by isocratic elution using common C18 or phenyl reversed-phase packing columns.

  3. THE ANALYSIS OF PARTIAL DISCHARGE (PD FROM ELECTRICAL TREEING IN LINEAR LOW DENSITY POLYETHYLENE (LLDPE AND HIGH DENSITY POLYETHYLENE (HDPE

    Directory of Open Access Journals (Sweden)

    Hermawan Hermawan

    2012-02-01

    Full Text Available Recently, the transmission of electric energy has been developed by insulated cable. The suitable materialas an insulated cable is LLDPE and HDPE. In order to understand the quality of insulation system, themeasuring of PD has done. PD could begin completely insulation failure (breakdown. Therefore, it is veryimportant to understand the characteristic of PD and the enclose event on it, because PD is a main factorwhich caused insulation failure.This paper presents the result of PD measurement in the laboratory that used needle-plane electrode. Itwas supported by equipments such as osiloskop Digital GDS 2104 GW Instek, HPF, and RC detector.Polymer sample that used in this research is LLDPE (Linier Low Density Polyethylene and HDPE with 20x 4 x 25 mm3 dimension in each. Needle was made by steel (length 50 mm and diameter 1.15 mm, it wasstick to the polymer material. The distance between needle to the plane is 5 mm. The applied voltage foreach sample was 16 kVrms, 18 kVrms, 20 kVrms and 22 kVrms. The Taking of PD data was done in thefirst minute, 10th minute, 20th and so on until 180th minute.The measurement result shows that the characteristic of PD number and maximum charge as a function oftime and as a function of applied voltage inclined increasing both on LLDPE and HDPE. But, PD intensityin HDPE is higher than LLDPE.

  4. The "New Polyethylene Glycol Dilemma": Polyethylene Glycol Impurities and Their Paradox Role in mAb Crystallization.

    Science.gov (United States)

    Hildebrandt, Christian; Joos, Lea; Saedler, Rainer; Winter, Gerhard

    2015-06-01

    Polyethylene glycols (PEG) represent the most successful and frequently applied class of excipients used for protein crystallization. PEG auto-oxidation and formation of impurities such as peroxides and formaldehydes that foster protein drug degradation is known. However, their effect on mAb crystallization has not been studied in detail before. During the present study, a model IgG1 antibody (mAb1) was crystallized in PEG solutions. Aggregate formation was observed during crystallization and storage that was ascribed to PEG degradation products. Reduction of peroxide and formaldehyde levels prior to crystallization by vacuum and freeze-drying was investigated for its effect on protein degradation. Vacuum drying was superior in removal of peroxides but inferior in reducing formaldehyde residues. Consequently, double purification allowed extensive removal of both impurities. Applying of purified PEG led to 50% lower aggregate fractions. Surprisingly, PEG double purification or addition of methionine prior to crystallization prevented crystal formation. With increased PEG concentration or spiking with peroxides and formaldehydes, crystal formation could be recovered again. With these results, we demonstrate that minimum amounts of oxidizing impurities and thus in consequence chemically altered proteins are vital to initiate mAb1 crystallization. The present study calls PEG as good precipitant for therapeutic biopharmaceuticals into question.

  5. Combined Low-Volume Polyethylene Glycol Solution Plus Stimulant Laxatives versus Standard-Volume Polyethylene Glycol Solution: A Prospective, Randomized Study of Colon Cleansing before Colonoscopy

    Directory of Open Access Journals (Sweden)

    Lawrence C Hookey

    2006-01-01

    Full Text Available INTRODUCTION: The effectiveness of polyethylene glycol solutions (PEG for colon cleansing is often limited by the inability of patients to drink adequate portions of the 4 L solution. The aim of the present study was to determine whether a reduced volume of PEG combined with stimulant laxatives would be better tolerated and as or more effective than the standard dose.

  6. SANS study of highly resilient poly(ethylene glycol) hydrogels.

    Science.gov (United States)

    Saffer, Erika M; Lackey, Melissa A; Griffin, David M; Kishore, Suhasini; Tew, Gregory N; Bhatia, Surita R

    2014-03-28

    Polymer networks are critically important for numerous applications including soft biomaterials, adhesives, coatings, elastomers, and gel-based materials for energy storage. One long-standing challenge these materials present lies in understanding the role of network defects, such as dangling ends and loops, developed during cross-linking. These defects can negatively impact the physical, mechanical, and transport properties of the gel. Here we report chemically cross-linked poly(ethylene glycol) (PEG) gels formed through a unique cross-linking scheme designed to minimize defects in the network. The highly resilient mechanical properties of these systems (discussed in a previous publication) [J. Cui, M. A. Lackey, A. E. Madkour, E. M. Saffer, D. M. Griffin, S. R. Bhatia, A. J. Crosby and G. N. Tew, Biomacromolecules, 2012, 13, 584-588], suggests that this cross-linking technique yields more homogeneous network structures. Four series of gels were formed based on chains of 35,000 g mol(-1), (35k), 12,000 g mol(-1) (12k) g mol(-1), 8000 g mol(-1) (8k) and 4000 g mol(-1) (4k) PEG. Gels were synthesized at five initial polymer concentrations ranging from 0.077 g mL(-1) to 0.50 g mL(-1). Small-angle neutron scattering (SANS) was utilized to investigate the network structures of gels in both D2O and d-DMF. SANS results show the resulting network structure is dependent on PEG length, transitioning from a more homogeneous network structure at high molecular weight PEG to a two phase structure at the lowest molecular weight PEG. Further investigation of the transport properties inherent to these systems, such as diffusion, will aid to further confirm the network structures.

  7. Improvement of aluminum/polyethylene adhesion through corona discharge

    Science.gov (United States)

    Popelka, Anton; Krupa, Igor; Novák, Igor; Al-Maadeed, Mariam Ali S. A.; Ouederni, Mabrouk

    2017-01-01

    Polyethylene (PE) is often used in several industrial applications including the building, packaging and transport industries. Aluminum (Al) is widely used in different applications in the automotive, railway, aeronautic, and naval industries because of its excellent mechanical and chemical properties. Laminates prepared from Al and PE lead to an enhancement in physical and mechanical properties. These materials play a main role in the packaging and building sectors, such as in TetraPak containers and aluminum composite panels. The main problem observed is associated with the adhesion between polymers and metals. This research focused on investigating the enhancement in the adhesion of the PE/Al laminate using the corona discharge. The corona treatment of the surfaces led to a significant increase in the adhesion of the PE/Al laminate as a result of improved surface properties confirmed by peel test measurements. Moreover, the positive effect of the corona treatment in combination with a primer on the improvement of adhesion characteristics was observed too. Different analytical techniques were employed to characterize the effect of the corona treatment on the improvement in adhesion of PE/Al. A significant increase in wettability was confirmed by the measurement of contact angles. Changes in the surface morphology of the PE and Al surface, after the corona treatments at different operating conditions, were observed using atomic force microscopy (AFM) and scanning electron microscopy (SEM). In addition, x-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) were used to analyze changes in chemical composition after the corona discharge effect on PE and Al surfaces.

  8. Surface modification of polypropylene membrane by polyethylene glycol graft polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Abednejad, Atiye Sadat, E-mail: atiyeabednejad@gmail.com [Department of Biomedical Engineering, Faculty of New Sciences and Technologies, University of Tehran, P.O. Box 14395-1561, Tehran (Iran, Islamic Republic of); Amoabediny, Ghasem [Department of Life Science Engineering, Faculty of New Sciences and Technologies, University of Tehran, P.O. Box 14395-1561, Tehran (Iran, Islamic Republic of); Research Center for New Technologies in Life Science Engineering, University of Tehran, P.O. Box 63894-14179, Tehran (Iran, Islamic Republic of); Ghaee, Azadeh [Department of Biomedical Engineering, Faculty of New Sciences and Technologies, University of Tehran, P.O. Box 14395-1561, Tehran (Iran, Islamic Republic of)

    2014-09-01

    Polypropylene hollow fiber microporous membranes have been used in a wide range of applications, including blood oxygenator. The hydrophobic feature of the polypropylene surface causes membrane fouling. To minimize fouling, a modification consisting of three steps: surface activation in H{sub 2} and O{sub 2} plasma, membrane immersion in polyethylene glycol (PEG) and plasma graft polymerization was performed. The membranes were characterized by contact angle measurement, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), tensile test, scanning electron microscopy (SEM) and atomic force microscopy (AFM). Oxygen transfer of modified membranes was also tested. The stability of grafted PEG was measured in water and in phosphate buffer saline (PBS) at 37 °C. Blood compatibility of modified surfaces was evaluated by the platelet adhesion method. Water contact angel reduction from 110° to 72° demonstrates the enhanced hydrophilicity, and XPS results verify the presence of oxygenated functional groups due to the peak existence in 286 eV as a result of PEG grafting. The results clearly indicate that plasma graft-polymerization of PEG is an effective way for antifouling improvement of polypropylene membranes. Also, the results show that oxygen transfer changes in PEG grafted membranes are not significant. - Highlights: • H{sub 2} and O{sub 2} plasma graft polymerization of PEG on polypropylene membrane was carried out. • Changes in surface properties were investigated by FTIR, XPS, SEM, and AFM. • Surface wettability enhanced as a result of poly ethylene glycol grafting. • PEG grafting degree increase causes reduction of fouling and adhesion.

  9. Structure and antibacterial properties of polyethylene/organo-vermiculite composites

    Science.gov (United States)

    Hundáková, Marianna; Tokarský, Jonáš; Valášková, Marta; Slobodian, Petr; Pazdziora, Erich; Kimmer, Dušan

    2015-10-01

    Vermiculite (VER) was modified by cation exchange with hexadecyltrimethylammonium (HDTMA+) bromide in three concentrations and used as organo-VER clay mineral nanofillers (denoted as HDTMA+1-VER, HDTMA+2-VER, and HDTMA+3-VER) in polyethylene (PE). PE/organo-VER composites were prepared via a melt compounding technique and pressed into thin plates. The organo-VER nanofillers and composite plates were characterized by X-ray diffraction analysis which in combination with molecular modeling confirmed the intercalation of HDTMA+ molecules. It was found that alkyl tails of HDTMA+ molecules create a non-polar, water-free area which may help the PE chains to enter the VER interlayer space. The nanocomposite structure was confirmed for PE/HDTMA+3-VER. PE/organo-VER composites were also studied by scanning electron microscopy and light microscopy and by creep testing. Antibacterial activity of powder organo-VER nanofillers was tested on Gram-positive (G+) (Staphylococcus aureus, Enterococcus faecalis) and Gram-negative (G-) (Escherichia coli) bacterial strains. The most sensitive G+ bacteria responded by stopping their bacterial growth after 24 h with a minimum inhibitory concentration (MIC) 0.014% (w/v) at all samples. Growth of G- bacteria was inhibited after 24 h with higher MIC value 0.041-10% (w/v) in relation to the content of HDTMA+ in samples. The surfaces of PE/organo-VER composites are very active against G+ bacterial strain E. faecalis. The number of bacterial colonies forming units (cfu) on surfaces of samples was reduced by approximately several orders. The number of bacterial colonies after 48 h was 0 cfu on the surface of PE/HDTMA+3-VER nanocomposite.

  10. Surface pre-treatment for barrier coatings on polyethylene terephthalate

    Science.gov (United States)

    Bahre, H.; Bahroun, K.; Behm, H.; Steves, S.; Awakowicz, P.; Böke, M.; Hopmann, Ch; Winter, J.

    2013-02-01

    Polymers have favourable properties such as light weight, flexibility and transparency. Consequently, this makes them suitable for food packaging, organic light-emitting diodes and flexible solar cells. Nonetheless, raw plastics do not possess sufficient barrier functionality against oxygen and water vapour, which is of paramount importance for most applications. A widespread solution is to deposit thin silicon oxide layers using plasma processes. However, silicon oxide layers do not always fulfil the requirements concerning adhesion and barrier performance when deposited on films. Thus, plasma pre-treatment is often necessary. To analyse the influence of a plasma-based pre-treatment on barrier performance, different plasma pre-treatments on three reactor setups were applied to a very smooth polyethylene terephthalate film before depositing a silicon oxide barrier layer. In this paper, the influence of oxygen and argon plasma pre-treatments towards the barrier performance is discussed examining the chemical and topological change of the film. It was observed that a short one-to-ten-second plasma treatment can reduce the oxygen transmission rate by a factor of five. The surface chemistry and the surface topography change significantly for these short treatment times, leading to an increased surface energy. The surface roughness rises slowly due to the development of small spots in the nanometre range. For very long treatment times, surface roughness of the order of the barrier layer's thickness results in a complete loss of barrier properties. During plasma pre-treatment, the trade-off between surface activation and roughening of the surface has to be carefully considered.

  11. Myocardial matrix-polyethylene glycol hybrid hydrogels for tissue engineering

    Science.gov (United States)

    Grover, Gregory N.; Rao, Nikhil; Christman, Karen L.

    2014-01-01

    Similar to other protein-based hydrogels, extracellular matrix (ECM) based hydrogels, derived from decellularized tissues, have a narrow range of mechanical properties and are rapidly degraded. These hydrogels contain natural cellular adhesion sites, form nanofibrous networks similar to native ECM, and are biodegradable. In this study, we expand the properties of these types of materials by incorporating poly(ethylene glycol) (PEG) into the ECM network. We use decellularized myocardial matrix as an example of a tissue specific ECM derived hydrogel. Myocardial matrix-PEG hybrids were synthesized by two different methods, cross-linking the proteins with an amine-reactive PEG-star and photo-induced radical polymerization of two different multi-armed PEG-acrylates. We show that both methods allow for conjugation of PEG to the myocardial matrix by gel electrophoresis and infrared spectroscopy. Scanning electron microscopy demonstrated that the hybrid materials still contain a nanofibrous network similar to unmodified myocardial matrix and that the fiber diameter is changed by the method of PEG incorporation and PEG molecular weight. PEG conjugation also decreased the rate of enzymatic degradation in vitro, and increased material stiffness. Hybrids synthesized with amine-reactive PEG had gelation rates of 30 min, similar to the unmodified myocardial matrix, and incorporation of PEG did not prevent cell adhesion and migration through the hydrogels, thus offering the possibility to have an injectable ECM hydrogel that degrades more slowly in vivo. The photo-polymerized radical systems gelled in 4 min upon irradiation, allowing 3D encapsulation and culture of cells, unlike the soft unmodified myocardial matrix. This work demonstrates that PEG incorporation into ECM-based hydrogels can expand material properties, thereby opening up new possibilities for in vitro and in vivo applications.

  12. Polyethylene glycol restores axonal conduction after corpus callosum transection.

    Science.gov (United States)

    Bamba, Ravinder; Riley, D Colton; Boyer, Richard B; Pollins, Alonda C; Shack, R Bruce; Thayer, Wesley P

    2017-05-01

    Polyethylene glycol (PEG) has been shown to restore axonal continuity after peripheral nerve transection in animal models. We hypothesized that PEG can also restore axonal continuity in the central nervous system. In this current experiment, coronal sectioning of the brains of Sprague-Dawley rats was performed after animal sacrifice. 3Brain high-resolution microelectrode arrays (MEA) were used to measure mean firing rate (MFR) and peak amplitude across the corpus callosum of the ex-vivo brain slices. The corpus callosum was subsequently transected and repeated measurements were performed. The cut ends of the corpus callosum were still apposite at this time. A PEG solution was applied to the injury site and repeated measurements were performed. MEA measurements showed that PEG was capable of restoring electrophysiology signaling after transection of central nerves. Before injury, the average MFRs at the ipsilateral, midline, and contralateral corpus callosum were 0.76, 0.66, and 0.65 spikes/second, respectively, and the average peak amplitudes were 69.79, 58.68, and 49.60 μV, respectively. After injury, the average MFRs were 0.71, 0.14, and 0.25 spikes/second, respectively and peak amplitudes were 52.11, 8.98, and 16.09 μV, respectively. After application of PEG, there were spikes in MFR and peak amplitude at the injury site and contralaterally. The average MFRs were 0.75, 0.55, and 0.47 spikes/second at the ipsilateral, midline, and contralateral corpus callosum, respectively and peak amplitudes were 59.44, 45.33, 40.02 μV, respectively. There were statistically differences in the average MFRs and peak amplitudes between the midline and non-midline corpus callosum groups (P < 0.01, P < 0.05). These findings suggest that PEG restores axonal conduction between severed central nerves, potentially representing axonal fusion.

  13. Polyethylene glycol restores axonal conduction after corpus callosum transection

    Directory of Open Access Journals (Sweden)

    Ravinder Bamba

    2017-01-01

    Full Text Available Polyethylene glycol (PEG has been shown to restore axonal continuity after peripheral nerve transection in animal models. We hypothesized that PEG can also restore axonal continuity in the central nervous system. In this current experiment, coronal sectioning of the brains of Sprague-Dawley rats was performed after animal sacrifice. 3Brain high-resolution microelectrode arrays (MEA were used to measure mean firing rate (MFR and peak amplitude across the corpus callosum of the ex-vivo brain slices. The corpus callosum was subsequently transected and repeated measurements were performed. The cut ends of the corpus callosum were still apposite at this time. A PEG solution was applied to the injury site and repeated measurements were performed. MEA measurements showed that PEG was capable of restoring electrophysiology signaling after transection of central nerves. Before injury, the average MFRs at the ipsilateral, midline, and contralateral corpus callosum were 0.76, 0.66, and 0.65 spikes/second, respectively, and the average peak amplitudes were 69.79, 58.68, and 49.60 μV, respectively. After injury, the average MFRs were 0.71, 0.14, and 0.25 spikes/second, respectively and peak amplitudes were 52.11, 8.98, and 16.09 μV, respectively. After application of PEG, there were spikes in MFR and peak amplitude at the injury site and contralaterally. The average MFRs were 0.75, 0.55, and 0.47 spikes/second at the ipsilateral, midline, and contralateral corpus callosum, respectively and peak amplitudes were 59.44, 45.33, 40.02 μV, respectively. There were statistically differences in the average MFRs and peak amplitudes between the midline and non-midline corpus callosum groups (P < 0.01, P < 0.05. These findings suggest that PEG restores axonal conduction between severed central nerves, potentially representing axonal fusion.

  14. Various-sourced pectin and polyethylene oxide electrospun fibers.

    Science.gov (United States)

    Rockwell, Pamela L; Kiechel, Marjorie A; Atchison, Jennifer S; Toth, Laura J; Schauer, Caroline L

    2014-07-17

    Pectin, a naturally occurring and biorenewable polysaccharide, is derived from plant cell wall tissue and used in applications ranging from food processing to biomedical engineering. Due to extraction methods and source variation, there is currently no consensus in literature as to the exact structure of pectin. Here, we have studied key material properties of electrospun pectin blends with polyethylene oxide (PEO) (1:1, v/v) in order to demonstrate the fabrication of a fibrous and less toxic material system, as well as to understand the effects of source variability on the resulting fibrous mats. The bulk pectin degree of esterification (DE) estimated using FTIR (bulk apple pomace (AP)=28%, bulk citrus peel (CP)=86% and bulk sugar beet pulp (SBP)=91%) was shown to inversely correlate with electrospun fiber crystallinity determined using XRD (PEO-AP=37%, PEO-CP=28% and PEO-SBP=23%). This in turn affected the trend observed for the mean fiber diameter (n=50) (PEO-AP=124 ± 26 nm, PEO-CP=493 ± 254 nm and PEO-SBP=581 ± 178 nm) and elastic tensile moduli (1.6 ± 0.2 MPa, 4.37 ± 0.64 MPa and 2.49 ± 1.46 MPa, respectively) of the fibrous mats. Electrospun fibers containing bulk AP had the lowest DE, highest crystallinity, smallest mean fiber diameter, and lowest tensile modulus compared to either the bulk CP or bulk SBP. Bound water in PEO-CP fiber and bulk pectin impurities in PEO-SPB were observed to influence fiber branching and mean diameter distributions, which in turn influenced the fiber tensile properties. These results indicate that pectin, when blended with PEO in water, produces submicron fibrous mats with pectin influencing the blend fiber properties. Moreover, the source of pectin is an important variable in creating electrospun blend fibrous mats with desired material properties.

  15. Robust identification of polyethylene terephthalate (PET) plastics through Bayesian decision.

    Science.gov (United States)

    Zulkifley, Mohd Asyraf; Mustafa, Mohd Marzuki; Hussain, Aini; Mustapha, Aouache; Ramli, Suzaimah

    2014-01-01

    Recycling is one of the most efficient methods for environmental friendly waste management. Among municipal wastes, plastics are the most common material that can be easily recycled and polyethylene terephthalate (PET) is one of its major types. PET material is used in consumer goods packaging such as drinking bottles, toiletry containers, food packaging and many more. Usually, a recycling process is tailored to a specific material for optimal purification and decontamination to obtain high grade recyclable material. The quantity and quality of the sorting process are limited by the capacity of human workers that suffer from fatigue and boredom. Several automated sorting systems have been proposed in the literature that include using chemical, proximity and vision sensors. The main advantages of vision based sensors are its environmentally friendly approach, non-intrusive detection and capability of high throughput. However, the existing methods rely heavily on deterministic approaches that make them less accurate as the variations in PET plastic waste appearance are too high. We proposed a probabilistic approach of modeling the PET material by analyzing the reflection region and its surrounding. Three parameters are modeled by Gaussian and exponential distributions: color, size and distance of the reflection region. The final classification is made through a supervised training method of likelihood ratio test. The main novelty of the proposed method is the probabilistic approach in integrating various PET material signatures that are contaminated by stains under constant lighting changes. The system is evaluated by using four performance metrics: precision, recall, accuracy and error. Our system performed the best in all evaluation metrics compared to the benchmark methods. The system can be further improved by fusing all neighborhood information in decision making and by implementing the system in a graphics processing unit for faster processing speed.

  16. Polyethylene recycling: Waste policy scenario analysis for the EU-27.

    Science.gov (United States)

    Andreoni, Valeria; Saveyn, Hans G M; Eder, Peter

    2015-08-01

    This paper quantifies the main impacts that the adoption of the best recycling practices together with a reduction in the consumption of single-use plastic bags and the adoption of a kerbside collection system could have on the 27 Member States of the EU. The main consequences in terms of employment, waste management costs, emissions and energy use have been quantified for two scenarios of polyethylene (PE) waste production and recycling. That is to say, a "business as usual scenario", where the 2012 performances of PE waste production and recycling are extrapolated to 2020, is compared to a "best practice scenario", where the best available recycling practices are modelled together with the possible adoption of the amended Packaging and Packaging Waste Directive related to the consumption of single-use plastic bags and the implementation of a kerbside collection system. The main results show that socio-economic and environmental benefits can be generated across the EU by the implementation of the best practice scenario. In particular, estimations show a possible reduction of 4.4 million tonnes of non-recycled PE waste, together with a reduction of around €90 million in waste management costs in 2020 for the best practice scenario versus the business as usual scenario. An additional 35,622 jobs are also expected to be created. In environmental terms, the quantity of CO2 equivalent emissions could be reduced by around 1.46 million tonnes and the net energy requirements are expected to increase by 16.5 million GJ as a consequence of the reduction in the energy produced from waste. The main analysis provided in this paper, together with the data and the model presented, can be useful to identify the possible costs and benefits that the implementation of PE waste policies and Directives could generate for the EU. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Stability of β-carotene in polyethylene oxide electrospun nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Peinado, I., E-mail: irpeipar@upvnet.upv.es [Free University of Bolzano, Piazza Università 5, 39100 Bolzano (Italy); Mason, M.; Romano, A. [Free University of Bolzano, Piazza Università 5, 39100 Bolzano (Italy); Biasioli, F. [Department of Food Quality and Nutrition, Research and Innovation Centre, Fondazione Edmund Mach (FEM), via E. Mach 1, 38010 San Michele all ‘Adige, TN (Italy); Scampicchio, M., E-mail: matteo.scampicchio@unibz.it [Free University of Bolzano, Piazza Università 5, 39100 Bolzano (Italy)

    2016-05-01

    Highlights: • β-carotene was incorporated into PEO-nanofibers by electrospinning. • Properties of the fibers were analyzed by SEM, color analysis, and DSC. • TGA coupled to PTR–ms resulted promising to online-monitoring thermal degradation. • Thermal stability of βc increased after encapsulation into the PEO-nanofibers. - Abstract: β-carotene (βc) was successfully incorporated into electrospun nanofibers of poly-(ethylene oxide) (PEO) with the aim of prolonging its shelf life and thermal stability. The physical and thermal properties of the βc-PEO-nanofibers were determined by scanning electron microscopy (SEM), color analysis, and differential scanning calorimetry (DSC). The nanofibers of PEO and βc-PEO exhibited average fiber diameters of 320 ± 46 and 230 ± 21 nm, with colorimetric coordinates L* = 95.7 ± 2.4 and 89.4 ± 4.6 and b* = −0.5 ± 0.1 and 6.2 ± 3.0 respectively. Thermogravimetric analysis coupled with Proton Transfer–Mass Spectroscopy (TGA/PTR–ms) demonstrated that coated βc inside PEO nanofibers increased thermal stability when compared to standard βc in powder form. In addition, β-carotene in the membranes showed higher stability during storage when compared with β-carotene in solution with a decrease in concentration of 57 ± 4% and 70 ± 2% respectively, thus should extend the shelf life of this compound. Also, TGA coupled with PTR–MS resulted in a promising technique to online-monitoring thermal degradation.

  18. Robust identification of polyethylene terephthalate (PET plastics through Bayesian decision.

    Directory of Open Access Journals (Sweden)

    Mohd Asyraf Zulkifley

    Full Text Available Recycling is one of the most efficient methods for environmental friendly waste management. Among municipal wastes, plastics are the most common material that can be easily recycled and polyethylene terephthalate (PET is one of its major types. PET material is used in consumer goods packaging such as drinking bottles, toiletry containers, food packaging and many more. Usually, a recycling process is tailored to a specific material for optimal purification and decontamination to obtain high grade recyclable material. The quantity and quality of the sorting process are limited by the capacity of human workers that suffer from fatigue and boredom. Several automated sorting systems have been proposed in the literature that include using chemical, proximity and vision sensors. The main advantages of vision based sensors are its environmentally friendly approach, non-intrusive detection and capability of high throughput. However, the existing methods rely heavily on deterministic approaches that make them less accurate as the variations in PET plastic waste appearance are too high. We proposed a probabilistic approach of modeling the PET material by analyzing the reflection region and its surrounding. Three parameters are modeled by Gaussian and exponential distributions: color, size and distance of the reflection region. The final classification is made through a supervised training method of likelihood ratio test. The main novelty of the proposed method is the probabilistic approach in integrating various PET material signatures that are contaminated by stains under constant lighting changes. The system is evaluated by using four performance metrics: precision, recall, accuracy and error. Our system performed the best in all evaluation metrics compared to the benchmark methods. The system can be further improved by fusing all neighborhood information in decision making and by implementing the system in a graphics processing unit for faster

  19. Analysis of polyethylene wear of reverse shoulder components: A validated technique and initial clinical results.

    Science.gov (United States)

    Lewicki, Kathleen A; Bell, John-Erik; Van Citters, Douglas W

    2016-06-27

    One of the most prevalent phenomena associated with reverse total shoulder arthroplasty (rTSA) is scapular notching. Current methods examine only the damage to the scapula and no methods are available for quantifying the total wear volume of the polyethylene humeral bearing. Quantifying the polyethylene material loss may provide insight into the mechanism for scapular notching and into the particle dose delivered to the patient. A coordinate measurement machine (CMM) and custom computer algorithms were employed to quantify the volumetric wear of polyethylene humeral bearings. This technique was validated using two never-implanted polyethylene humeral liners with a controlled amount of wear in clinically relevant locations. The technique was determined to be accurate to within 10% of the known value and within 5 mm(3) of the gravimetrically determined values. Following validation, ten retrieved polyethylene humeral liners were analyzed to determine a baseline for future clinical tests. Four of the ten polyethylene humeral liners showed visible and measureable wear volumes ranging from 40 mm(3) to 90 mm(3) total with a maximum wear rate as high as 470 mm(3) /year in one short duration and significantly damaged humeral liner. This validated technique has the potential to relate patient outcomes such as scapular notching grades to polyethylene release into the body. While the total wear volumes are less than reported in literature for cases of osteolysis in knee and hip patients, dosages are well within the osteolytic thresholds that have been suggested, indicating that osteolysis may be a clinical concern in the shoulder. This work provides the basis for future studies that relate volumetric wear to patient outcomes. This article is protected by copyright. All rights reserved.

  20. A comparison of the wear and physical properties of silane cross-linked polyethylene and ultra-high molecular weight polyethylene.

    Science.gov (United States)

    Sakoda, H; Voice, A M; McEwen, H M; Isaac, G H; Hardaker, C; Wroblewski, B M; Fisher, J

    2001-12-01

    Cross-linked polyethylenes are being introduced widely in acetabular cups in hip prostheses as a strategy to reduce the incidence of wear debris-induced osteolysis. It will be many years before substantial clinical data can be collected on the wear of these new materials. Silane cross-linked polyethylene (XLPE) was introduced into clinical practice in a limited series of acetabular cups in 1986 articulating against 22.225-mm alumina ceramic femoral heads and showed reduced wear rates compared with conventionally sterilized (gamma irradiation in air) ultra-high molecular weight polyethylene (UHMWPE). We compared the wear of XLPE manufactured in 1986 with the wear of UHMWPE manufactured in 1986 in nonirradiated and irradiated forms. In the nonirradiated forms, the wear of XLPE was 3 times less than UHWMPE when articulating against smooth counterfaces. The nonirradiated materials did not show signs of oxidation. In the irradiated forms, only UHMWPE showed high levels of oxidation, and this caused a substantial increase in wear. Antioxidants added to XLPE during processing gave resistance to oxidative degradation. When sliding against scratched counterfaces, the wear of UHMWPE increased by a factor of 2 to 3 times. Against the same scratched counterfaces, the wear of XLPE increased dramatically by 30 to 200 times. This difference may be attributed to the reduction in toughness of XLPE. Clinically, XLPE has been articulated against damage-resistant ceramic heads, and this probably has been an important factor in contributing to reduced wear. New cross-linked polyethylenes differ considerably from XLPE. This study indicates that it is prudent to examine the wear of new polyethylenes under a range of conditions that may occur in vivo.

  1. Isolation and Characterization of Wear Debris Generated in Patients Wearing Polyethylene Hylamer Inserts, Gamma Irradiated in Air

    OpenAIRE

    2005-01-01

    Abstract Hylamer polyethylene was used in the early 1990s to make hip-joint components. Clinical experience has shown that these components, if sterilized by gamma rays in the presence of oxygen, are easily affected by wear, which then leads to osteolysis. The authors analyzed polyethylene wear particles in seven patients who had received Hylamer polyethylene implants sterilized by gamma rays in air and had...

  2. Isolation and Characterization of Wear Debris Generated in Patients Wearing Polyethylene Hylamer Inserts, Gamma Irradiated in Air

    OpenAIRE

    Visentin, M; Stea, S.; Squarzoni, S.; Reggiani, M.; Fagnano, C.; Antonietti, B.; Toni, A.

    2005-01-01

    International audience; Hylamer polyethylene was used in the early 1990s to make hip-joint components. Clinical experience has shown that these components, if sterilized by gamma rays in the presence of oxygen, are easily affected by wear, which then leads to osteolysis. The authors analyzed polyethylene wear particles in seven patients who had received Hylamer polyethylene implants sterilized by gamma rays in air and had suffered prosthetic loosening. The results were compared to those of si...

  3. Colonoscopy Preparation: Polyethylene Glycol with Gatorade is as Safe and Efficacious as 4 Liters of Polyethylene Glycol with Balanced Electrolytes

    Science.gov (United States)

    McKenna, Thomas; Macgill, Alice; Porat, Gail; Friedenberg, Frank K.

    2013-01-01

    Background Four liters of polyethylene glycol 3350 with balanced electrolytes for colonoscopy preparation has had poor acceptance. Another approach is the use of electrolyte-free PEG combined with 1.9L of Gatorade. Despite its widespread use, there are no data on metabolic safety and minimal data on efficacy. Our aim was to assess the efficacy and electrolyte safety of these two PEG-based preparations. Methods This was a prospective, randomized, single-blind, non-inferiority trial. Patients were randomized to 238g PEG + 1.9L Gatorade or 4L of PEG-ELS containing 236g PEG. Split dosing was not performed. On procedure day blood was drawn for basic chemistries. The primary outcome was preparation quality from procedure photos using the Boston Bowel Preparation Scale. Results We randomized 136 patients (66 PEG + Gatorade, 70 PEG-ELS). There were no differences in preparation scores between the two agents in the ITT analysis (7.2 ± 1.9 for PEG-ELS and 7.0 ± 2.1 for PEG + Gatorade; p = 0.45). BBPS scores were identical for those who completed the preparation and dietary instructions as directed (7.4 ± 1.7 for PEG-ELS, and 7.4 ± 1.8 for PEG + Gatorade; p = 0.98). There were no statistical differences in serum electrolytes between the two preparations. Patients who received PEG + Gatorade gave higher overall satisfaction scores for the preparation experience (p = 0.001), and had fewer adverse effects. Conclusions Use of 238g PEG + 1.9L Gatorade appears to be safe, better tolerated, and non-inferior to 4L PEG-ELS. This preparation may be especially useful for patients who previously tolerated PEG-ELS poorly. PMID:22711499

  4. Colonoscopy preparation: polyethylene glycol with Gatorade is as safe and efficacious as four liters of polyethylene glycol with balanced electrolytes.

    Science.gov (United States)

    McKenna, Thomas; Macgill, Alice; Porat, Gail; Friedenberg, Frank K

    2012-12-01

    Four liters of polyethylene glycol 3350 (PEG) with balanced electrolytes for colonoscopy preparation has had poor acceptance. Another approach is the use of electrolyte-free PEG combined with 1.9 L of Gatorade. Despite its widespread use, there are no data on metabolic safety and minimal data on efficacy. Our aim was to assess the efficacy and electrolyte safety of these two PEG-based preparations. This was a prospective, randomized, single-blind, non-inferiority trial. Patients were randomized to 238 g PEG + 1.9 L Gatorade or 4 L of PEG-ELS containing 236 g PEG. Split dosing was not performed. On procedure day blood was drawn for basic chemistries. The primary outcome was preparation quality from procedure photos using the Boston Bowel Preparation Scale. We randomized 136 patients (66 PEG + Gatorade, 70 PEG-ELS). There were no differences in preparation scores between the two agents in the ITT analysis (7.2 ± 1.9 for PEG-ELS and 7.0 ± 2.1 for PEG + Gatorade; p = 0.45). BBPS scores were identical for those who completed the preparation and dietary instructions as directed (7.4 ± 1.7 for PEG-ELS, and 7.4 ± 1.8 for PEG + Gatorade; p = 0.98). There were no statistical differences in serum electrolytes between the two preparations. Patients who received PEG + Gatorade gave higher overall satisfaction scores for the preparation experience (p = 0.001), and had fewer adverse effects. Use of 238 g PEG + 1.9 L Gatorade appears to be safe, better tolerated, and non-inferior to 4 L PEG-ELS. This preparation may be especially useful for patients who previously tolerated PEG-ELS poorly.

  5. [Ear reconstruction using porous polyethylene implants. Effect of cortisone on edema reduction and healing process].

    Science.gov (United States)

    Naumann, A; Ehrmantraut, S; Willnecker, V; Menger, M D; Schick, B; Laschke, M W

    2011-03-01

    Porous polyethylene implants are increasingly used for ear reconstruction. Although the material used exhibits good biocompatibility, swelling and edema formation frequently occur after implantation, which may be treated by prophylactic cortisone therapy. The aim of the present study was to analyze the effects of cortisone therapy on the postoperative healing process. Between 2006 and 2010 porous polyethylene implants (Medpor®) were used for ear reconstruction of high-grade ear deformities in 23 patients (m:f=11:12; age: 17.2±12.4 years). For this purpose, 11 patients were treated systemically with cortisone (3 mg/kg body weight Solu-Decortin H) for the first 3 postoperative days, whereas 12 patients (controls) did not receive cortisone. Postoperatively, we analyzed the time course of edema formation, complications and the reconstructive result. Rejection or extrusion of the polyethylene implants was not observed in any of the patients (n=23) during a postoperative observation period of up to 3.5 years. Within 3-12 months after ear reconstruction all patients exhibited a completely shaped ear. Administration of cortisone had no significant effect on postoperative edema formation or the reconstructive end result. Porous polyethylene implants are well suited for the reconstruction of moderate to high-grade ear deformities. Since administration of cortisone does not significantly affect the postoperative healing process, prophylactic cortisone treatment following ear reconstruction with porous polyethylene implants should be omitted with regard to potential side effects.

  6. Tribology, UV degradation, and structure-property-processing relationships of detonation nanodiamond-polyethylene nanocomposites

    Science.gov (United States)

    Tipton, John

    Nanoscale reinforcements offer the possibility of coupling the already proven high strength to weight properties of polymer matrix composites with additional multifunctional properties such as electrical conductivity, thermal conductivity, unique optics, UV/IR radiation absorption, and enhanced wear resistance. This work presents materials based on detonation nanodiamonds dispersed in two types of polyethylene. The work begins with an understanding of nucleation phenomena. It was discovered through isothermal kinetics using differential scanning calorimetry that nanodiamonds act as nucleating agents during polyethylene crystallization. A processing technique to disperse nanodiamonds into very viscous ultra-high molecular weight polyethylene was developed and analyzed. These composites were further studied using dynamic mechanical analysis which showed increases in both stiffness and energy absorbing modes over unfilled UHMWPE. Exposure to UV degradation caused a failure of the polymer microstructure which was found to be caused by residual tensile stresses between the polymer particles formed during processing. These high stress regions were more prone to photo oxidation even though the nanodiamond particles were shown to decrease surface oxidation. Additionally, the tribological properties of UHMWPE/nanodiamond composites were investigated. Ultra-high molecular weight polyethylene is an already proven ultra tough and wear resistant polymer that is used in many high performance thermoplastic applications such as bearings, surfaces (skids/wheels), ropes/nets, and orthopedic implants. This work showed that UHMWPE loaded with 5.0wt% nanodiamonds might be a candidate to replace the currently used crosslinked polyethylene material used in orthopedic implants.

  7. Crystallization Kinetics of Indomethacin/Polyethylene Glycol Dispersions Containing High Drug Loadings.

    Science.gov (United States)

    Duong, Tu Van; Van Humbeeck, Jan; Van den Mooter, Guy

    2015-07-06

    The reproducibility and consistency of physicochemical properties and pharmaceutical performance are major concerns during preparation of solid dispersions. The crystallization kinetics of drug/polyethylene glycol solid dispersions, an important factor that is governed by the properties of both drug and polymer has not been adequately explored, especially in systems containing high drug loadings. In this paper, by using standard and modulated differential scanning calorimetry and X-ray powder diffraction, we describe the influence of drug loading on crystallization behavior of dispersions made up of indomethacin and polyethylene glycol 6000. Higher drug loading increases the amorphicity of the polymer and inhibits the crystallization of PEG. At 52% drug loading, polyethylene glycol was completely transformed to the amorphous state. To the best of our knowledge, this is the first detailed investigation of the solubilization effect of a low molecular weight drug on a semicrystalline polymer in their dispersions. In mixtures containing up to 55% indomethacin, the dispersions exhibited distinct glass transition events resulting from amorphous-amorphous phase separation which generates polymer-rich and drug-rich domains upon the solidification of supercooled polyethylene glycol, whereas samples containing at least 60% drug showed a single amorphous phase during the period in which crystallization normally occurs. The current study demonstrates a wide range in physicochemical properties of drug/polyethylene glycol solid dispersions as a result of the complex nature in crystallization of this system, which should be taken into account during preparation and storage.

  8. Diffraction filters based on polyimide and poly(ethylene naphthalate) track membranes

    Science.gov (United States)

    Mitrofanov, A. V.; Apel, P. Yu.; Blonskaya, I. V.; Orelovitch, O. L.

    2006-09-01

    The problem of optical filters for soft x rays and extreme ultraviolet that provide a high degree of blocking ultraviolet and visible background radiations is considered. The subject of discussion is the filter based on a track membrane, a polymer film with micrometer and submicrometer pores, rather than the standard thin-film system. It is proposed that the membranes be made of poly(ethylene naphthalate) or polyimide, the UV absorption edge of which lies near the boundary of the visible range. The properties of poly(ethylene naphthalate) and polyimide membranes are contrasted with those of conventional porous poly(ethylene terephthalate) films, which are obtained by ion track etching. The spectral characteristics of poly(ethylene naphthalate) and polyimide films, as well as the formation of “track” pores when the specimens are successively treated by fast ions and chemicals, are studied. The basic parameters of the resulting porous structures are examined, and treatment conditions under which desired optical properties of the membranes are achieved are found. Filters based on poly(ethylene naphthalate) and polyimide track membranes may be applied in x-ray astronomy as constituents of detectors incorporated into solar telescopes and in experiments with the laboratory plasma.

  9. Thermal Decomposition Behavior and Kinetics of Composites from Coal and Polyethylene

    Institute of Scientific and Technical Information of China (English)

    YANG Fu-sheng; QU Jian-lin; YANG Zhi-yuan; ZHOU An-ning

    2007-01-01

    A thermogravimetric analysis (TG) was conducted to study the thermal decomposition behavior and kinetics of composites from coal and high density polyethylene (HDPE), linear low density polyethylene (LLDPE) or low density polyethylene (LDPE). The results show that coal facilitates melting of the polyethylene before temperatures reach 700 K in nitrogen due to the exothermic effect of coal. Above 700 K, adding coal into the polyethylene will result in smaller maximum rates of mass loss and higher initial mass loss temperatures of the composites. Hence, some chemical interactions, occurring between liquid compounds released in the pyrolysis of the coal and polymer, depend on several factors, such as coal rank and the molecular structure of polymers. Synergetic effects in coal and polymers were also found. Both chemical interactions and synergetic effects control the entire thermal decomposition behavior of composites. The larger the amount of coal in the composites, the greater the decomposition temperature spans and the higher the maximum decomposition temperature, the smaller the devolatilization rates. The effect of coal on the thermal stability of composites lies in the hydrogen acceptor effect of the coals. Thermal decomposition of the coals, the polymers and related composites can be modelled via first order parallel reactions between 563 K and 763 K.

  10. Evaluation of Polyethylen - Vazeline guaze and melolin on healing of graft donor sites in rat

    Directory of Open Access Journals (Sweden)

    Mohammad Javad Fatemi

    2014-08-01

    Full Text Available Background: Different types of dressings are applied on wounds to accelerate the healing process and improve its long term outcomes. This study designed to compare the healing rate of skin graft donor site while dressed with polyethylene, Meloline and Vaseline in rats. Material and Methods: In an experimental study, polyethylen, vazeline gauze and melolin were used for skin grft donor site dressing. 30 rats, randomly assigned to 3 groups. An approximately 5x5 cm split thickness wound was made on the dorsum of each rat under general anesthesia. Then dressed by polyethylene, Vaseline gauze and Melolin in each group. The wound size was measured by Image J sotware after operation and on days 3, 6, 9 and 12 to evaluate the rate of healing, then the results compared between groups. Results: The mean area of the wound size on day 12 was 0.72±0.44 cm2 in Vaseline group, 0.68±0.75 cm2 in polyethylene group and 0.14±0.17 cm2 in Meloline group.In 3rd day Vaseline group had smaller size, but in days 6 and 9 the smaller size belonged to Meloline similar to day 12, which differed statistically with Vaseline.P<0.04 Conclusion: Polyethylene dressing according to its low price and acceptable rate of wound healing may be an appropriate choice for wounds’ dressing.

  11. Vitamin E diffused highly cross-linked polyethylene in total hip arthroplasty at five years

    DEFF Research Database (Denmark)

    Nebergall, Audrey K; Greene, M. E.; Laursen, M B

    2017-01-01

    AIMS: The objective of this five-year prospective, blinded, randomised controlled trial (RCT) was to compare femoral head penetration into a vitamin E diffused highly cross-linked polyethylene (HXLPE) liner with penetration into a medium cross-linked polyethylene control liner using radiostereome......AIMS: The objective of this five-year prospective, blinded, randomised controlled trial (RCT) was to compare femoral head penetration into a vitamin E diffused highly cross-linked polyethylene (HXLPE) liner with penetration into a medium cross-linked polyethylene control liner using...... radiostereometric analysis. PATIENTS AND METHODS: Patients scheduled for total hip arthroplasty (THA) were randomised to receive either the study E1 (32 patients) or the control ArComXL polyethylene (35 patients). The median age (range) of the overall cohort was 66 years (40 to 76). RESULTS: The five-year median...... (interquartile range) proximal femoral head penetration into the E1 was -0.05 mm (-0.13 to -0.02) and 0.07 mm (-0.03 to 0.16) for ArComXL. At three and five years, the penetration was significantly greater in the ArComXL group compared with the E1 group (p = 0.029 and p = 0.019, respectively). All patient...

  12. Fluence-to-dose equivalent conversion factors for polyethylene-moderated {sup 252}Cf

    Energy Technology Data Exchange (ETDEWEB)

    Tanner, J.E.; Soldat, K.L.; Stewart, R.D. [Pacific Northwest Lab., Richland, WA (United States); Casson, W.H. [Los Alamos National Lab., NM (United States)

    1994-04-01

    Neutron measurements and calculations were conducted to characterize the polyethylene-moderated {sup 252}Cf source at Oak Ridge National Laboratory`s Radiation Calibration Laboratory (RADCAL). The 12-inch-diameter polyethylene sphere produces a highly scattered neutron spectrum which is more representative of most radiation fields found in the workplace than the D{sub 2}O-moderated {sup 252}Cf neutron spectrum typically used for dosimeter calibration. However, the energy-dependent fluence and dose equivalent must be well known before using such a source for radiation protection purposes. The measurements and calculations were performed as independent checks of the desired quantities which were the flux, the absorbed dose rate, the dose equivalent rate, and the average energy. These quantities were determined for the polyethylene sphere with and without an outer cadmium shell and compared with a D{sub 2}O-moderated {sup 252}Cf source.

  13. Hearing Gain with Tailor-made Polyethylene Strut in Total Stapedectomy

    Directory of Open Access Journals (Sweden)

    Kanthong Thongyai

    2017-01-01

    Full Text Available Objective: To study audiometric changes after total stapedectomy with tailor-made polyethylene strut. Methods: A retrospective analysis of preoperative and postoperative hearing results. One hundred and ninety- eight patients underwent total stapedectomy during 2009-2014. Stapedectomy was performed with tailor-made polyethylene strut prosthesis on vein or perichondrium graft over oval window. Changes of preoperative and postoperative pure tone average (PTA were calculated from 4 frequencies after stapedectomy. Results: Ninety percent success rate in the air-bone gap closure within 10 dB after stapedectomy. Conclusion: Tailor-made polyethylene strut prosthesis is a cheap and cost-effective prosthesis, which is an alternative option for surgeons instead of the commercial prosthesis.

  14. Molecular dynamics simulation for mechanical properties of CNT/Polyethylene composites

    Energy Technology Data Exchange (ETDEWEB)

    Liu Jia; Yang Qingsheng [Department of Engineering Mechanics, Beijing University of Technology, Beijing 100124 (China)], E-mail: jiajia2007@emails.bjut.edu.cn, E-mail: qsyang@bjut.edu.cn

    2009-09-01

    The pull-out process of the carbon nanotube from polyethylene was simulated by molecular dynamics method. A model of a carbon nanotube in polyethylene was established. In the simulation, Adaptive Intermolecular Reactive Empirical Bond Order(ARIEBO) potential was adopted to describe the interaction of C-C and C-H in the carbon nanotube and polymer, and Lennard-Jones pair potential was used to describe the interaction between the carbon nanotube and polymer; NVT ensemble was adopted in the whole simulation and Nose-Hoover method was used to control the temperature at absolute zero, which avoided the influence induced by thermal activation; Verlet algorithm was used to solve molecular dynamics equations in the procedure of simulation. The deformation and forces on interfaces between the carbon nanotube and polymer was analyzed by simulating the process of pulling-out of the carbon nanotube from polyethylene.

  15. Effect of Polyethylene Crosslinking and Bearing Design on Wear of Unicompartmental Arthroplasty.

    Science.gov (United States)

    Netter, Jonathan; Hermida, Juan C; D'Alessio, Jerry; Kester, Mark; D'Lima, Darryl D

    2015-08-01

    Wear and polyethylene damage continue to be important factors affecting outcomes of unicompartmental knee arthroplasty. We compared two design rationales for unicompartmental arthroplasty: fully congruent mobile bearings; or moderately conforming fixed bearings using experimental and computational wear simulation. Experimental wear rates were 3.89 (±0.12) mg/million cycles for the highly crosslinked Triathlon PKR fixed bearing compared to 18.35 (±0.19) mg/million cycles for the low crosslinked Oxford mobile bearing. Finite element analysis was used to calculate the effect of crosslinking and backside wear. Increase in polyethylene crosslinking reduced wear by 68% while backside wear comprised 46% of the total wear in the mobile bearing. Increasing conformity may not be the sole predictor of wear performance and highly crosslinked fixed-bearing polyethylene insert can also provide high wear performance.

  16. Predicting Glass Transition Temperature of Polyethylene/Graphene Nanocomposites by Molecular Dynamic Simulation

    Institute of Scientific and Technical Information of China (English)

    SHENG Yan-zhen; YANG Hua; LI Jun-yin; SUN Miao

    2013-01-01

    The glass transition temperature of polyethylene/graphene nanocomposites was investigated by molecular dynamic simulation.The specific volumes of three systems(polyethylene,polyethylene with a small graphene sheet and two small graphene sheets) were examined as a function of temperature.We found that the glass transition temperature decreases with increasing graphene.Then the van der Waals energy changes obviously with increasing graphene and the torsion energy also plays an important role in the glass transition of polymer.The radial distribution functions of the inter-molecular carbon atoms suggest the interaction between PE and graphene weakens with increasing graphene.These indicate that graphene can prompt the motion of chain segments of polymer and decrease the glass transition temperature (Tg) of polymer.

  17. AL-SX (H1616) Container Support: Out-gassing of Polyethylene and Polycarbonate Resins

    Energy Technology Data Exchange (ETDEWEB)

    G.Cook Story; Leon Seibel and Linda Domeier

    1999-04-01

    Out-gassing tests were carried out on samples of polyethylene and polycarbonate packaging components used within the AL-SX (H1616) shipping container and compared to known samples of high and low density polyethylene and polycarbonate. Polyethylene is used to fabricate the shipping container overpack for the MC3007A/MC4059 and 1X-Acorn; LEXAN{reg_sign} polycarbonate (General Electric) is used to fabricate the lid of the Protective Container utilized to package the MC4213/MC4240 and MC4524 for shipment in the AL-SX (H1616). Pressure was monitored up to about 650 F and all the samples showed similar increases in pressure which were only slightly above those measured for control runs using no resin sample. None of the polymer samples showed out-gassing behavior that would lead to excessive pressure increases in the H1616 within that temperature range.

  18. Effect of trifunctional monomers and antioxidants on crosslinking reaction of polyethylene. [Electron beams

    Energy Technology Data Exchange (ETDEWEB)

    Pyun, H.C.; Lee, Y.C.; Kim, K.J.; Yoon, B.M. (Korea Advanced Energy Research Inst., Seoul (Republic of Korea))

    1982-06-01

    The crosslinking reaction and oxidative stability of low-density polyethylene were studied in the presence of trifunctional monomers and antioxidants with electron beams. The trifunctional monomers used in this study are Trimethylolpropane triacrylate (TMPTA), Trimethylolpropane trimethacrylate (TMPTM) and Triallyl cyanurate (TAC). And the antioxidants are Irganox 1010 (Pentaerythritoltetrakis(3-(3,5-di-t-butyl-4-hydroxyphenly)-propionate)), Santonox R(4,4'-Thio-bis(3-methyl-6-t-butylphenol)), Nocrac D(N-phenyl-..beta..-naphthylamine) and Bisphenol A(4,4'-Isopropylidene bisphenol). Among the monomers, TMPTA is the best crosslinking agent and provides polyethylene with oxidative stability. Among the antioxidants, Nocrac D is the best antioxidant for polyethylene.

  19. Poly(Ethylene Glycol-Based Backbones with High Peptide Loading Capacities

    Directory of Open Access Journals (Sweden)

    Aoife O'Connor

    2014-10-01

    Full Text Available Polymer-peptide conjugates are a promising class of compounds, where polymers can be used to overcome some of the limitations associated with peptides intended for therapeutic and/or diagnostic applications. Linear polymers such as poly(ethylene glycol can be conjugated through terminal moieties and have therefore limited loading capacities. In this research, functionalised linear poly(ethylene glycols are utilised for peptide conjugation, to increase their potential loading capacities. These poly(ethylene glycol derivatives are conjugated to peptide sequences containing representative side-chain functionalised amino acids, using different conjugation chemistries, including copper-catalysed azide-alkyne cycloaddition, amide coupling and thiol-ene reactions. Conjugation of a sequence containing the RGD motif to poly(allyl glycidyl ether by the thiol-ene reaction, provided a conjugate which could be used in platelet adhesion studies.

  20. Long-term outcome of a metal-on-polyethylene cementless hip resurfacing.

    Science.gov (United States)

    Tan, Timothy L; Ebramzadeh, Edward; Campbell, Patricia A; Al-Hamad, Mariam; Amstutz, Harlan C

    2014-04-01

    Due to the well-documented problems surrounding metal-on-metal bearings, the use of hip resurfacing has declined. Since the potential benefits of hip resurfacing remain desirable, it may be beneficial to investigate the long-term outcome of hip resurfacings using metal-on-polyethylene in the 1980's. We report the long-term survivorship and modes of failure of a cementless metal-on-polyethylene resurfacing (n = 178) with different porous ingrowth surfaces. While acetabular loosening was absent, a high incidence of femoral failures (femoral loosening = 18.1%, osteolytic neck fracture = 21%) occurred despite using the same ingrowth surface for both components. Ongoing developments using the lessons learned from these previous generation components and utilizing modern low wear materials, e.g., cross-linked polyethylene, may lead to improved implants for future hip resurfacings.

  1. Equal channel angular extrusion of ultra-high molecular weight polyethylene.

    Science.gov (United States)

    Reinitz, Steven D; Engler, Alexander J; Carlson, Evan M; Van Citters, Douglas W

    2016-10-01

    Ultra-high molecular weight polyethylene (UHMWPE), a common bearing surface in total joint arthroplasty, is subject to material property tradeoffs associated with conventional processing techniques. For orthopaedic applications, radiation-induced cross-linking is used to enhance the wear resistance of the material, but cross-linking also restricts relative chain movement in the amorphous regions and hence decreases toughness. Equal Channel Angular Extrusion (ECAE) is proposed as a novel mechanism by which entanglements can be introduced to the polymer bulk during consolidation, with the aim of imparting the same tribological benefits of conventional processing without complete inhibition of chain motion. ECAE processing at temperatures near the crystalline melt for UHMWPE produces (1) increased entanglements compared to control materials; (2) increasing entanglements with increasing temperature; and (3) mechanical properties between values for untreated polyethylene and for cross-linked polyethylene. These results support additional research in ECAE-processed UHMWPE for joint arthroplasty applications.

  2. EFFECT OF DISPERSION OF MICA IN MATRIX ON YOUNG'S MODULUS OF MICA FILLED POLYETHYLENE

    Institute of Scientific and Technical Information of China (English)

    XU Xi; GONG Xiaoyi

    1991-01-01

    The correlation between Young's modulus of mica-filled high density polyethylene (HDPE), low density polyethylene(LDPE) and the state of dispersion of plasma-treated mica in the polymer matrices was studied. The modulus and the number average diameter of mica aggregates in matrix were determined with tensile testing and image analysis respectively. The interface structure of the filler/matrix and the bulk structure of matrix were examined through the dielectric spectrometry,differential scanning calorimetry (DSC) and dynamic viscoelastic spectrometry. The results show that the Young's modulus of the filled polyethylene depends to a great extent upon the state of dispersion of filler in matrix, but it is independent of the interface structure and bulk structure. The better the dispersion, the higher the Young's modulus.

  3. Highly conductive polymer electrolyte membranes modified with polyethylene glycol-bis-carbamate

    Science.gov (United States)

    Fu, Guopeng; Dempsey, Janel; Kyu, Thein

    By virtue of its non-flammability and chemical stability, polyethylene glycol (PEG) networks have shown potential application in all solid-state polymer electrolyte membranes (PEM). However, room temperature ionic conductivity of these PEG based PEMs is inherently low. Plasticization of these PEMs is needed to improve the ionic conductivity. It was demonstrated by this group that small-molecule plasticizers such as succinonitrile, ethylene carbonate, or urea-carbamate can boost ionic conductivity of solid-state polymer electrolyte membranes. Polyethylene glycol bis-carbamate (PEGBC) was synthesized via condensation reaction of polyethylene glycol diamine and ethylene carbonate. The PEGBC modified PEM has shown higher ionic conductivity relative to the unmodified PEM. Moreover, PEGBC modified PEM has a better thermal stability relative to ethylene carbonate based liquid electrolyte with enhanced ionic conductivity. Supported by NSF-DMR 1161070, 1502543 and REU 1359321.

  4. EFFECTS OF COMPATIBILIZERS ON THE MECHANICAL PROPERTIES OF LOW DENSITY POLYETHYLENE/LIGNIN BLENDS

    Institute of Scientific and Technical Information of China (English)

    Feng Luo; Nan-ying Ning; Long Chen; Run Su; Jing Cao; Qin Zhang; Qiang Fu; Shu-gao Zhao

    2009-01-01

    Low density polyethylene (LDPE)/lignin blends were prepared using melt blending. Two kinds of compatibilizers, ethylene-vinylacetate (EVA) which is softer than LDPE and polyethylene grafted with maleic anhydride (PE-g-MA) which is harder than LDPE were used to improve the interfacial adhesion. Scanning electron microscope (SEM) was used to investigate the dispersion of lignin in LDPE matrix. The results showed that both of the compatibilizers could improve the interaction between the low density polyethylene and lignin. However, the effects of the two compatibilizers on the mechanical properties of LDPE/lignin blends were different. The elongation at break of the blends was obviously increased by adding EVA, while significant improvement of tensile strength was observed by adding PE-g-MA. Several theoretical models have been used to further analyze the experimental data, combined with the morphological observation of tensile fractured surfaces by SEM.

  5. Plasma treated polyethylene grafted with adhesive molecules for enhanced adhesion and growth of fibroblasts

    Energy Technology Data Exchange (ETDEWEB)

    Rimpelová, Silvie [Department of Biochemistry and Microbiology, Institute of Chemical Technology, Prague, Technická 5, Prague 6, 166 28 (Czech Republic); Kasálková, Nikola Slepičková; Slepička, Petr [Department of Solid State Engineering, Institute of Chemical Technology, Prague, Technická 5, Prague 6, 166 28 (Czech Republic); Lemerová, Helena [Department of Biochemistry and Microbiology, Institute of Chemical Technology, Prague, Technická 5, Prague 6, 166 28 (Czech Republic); Švorčík, Václav [Department of Solid State Engineering, Institute of Chemical Technology, Prague, Technická 5, Prague 6, 166 28 (Czech Republic); Ruml, Tomáš, E-mail: tomas.ruml@vscht.cz [Department of Biochemistry and Microbiology, Institute of Chemical Technology, Prague, Technická 5, Prague 6, 166 28 (Czech Republic)

    2013-04-01

    The cell–material interface plays a crucial role in the interaction of cells with synthetic materials for biomedical use. The application of plasma for tailoring polymer surfaces is of abiding interest and holds a great promise in biomedicine. In this paper, we describe polyethylene (PE) surface tuning by Ar plasma irradiating and subsequent grafting of the chemically active PE surface with adhesive proteins or motives to support cell attachment. These simple modifications resulted in changed polymer surface hydrophilicity, roughness and morphology, which we thoroughly characterized. The effect of our modifications on adhesion and growth was tested in vitro using mouse embryonic fibroblasts (NIH 3T3 cell line). We demonstrate that the plasma treatment of PE had a positive effect on the adhesion, spreading, homogeneity of distribution and moderately on proliferation activity of NIH 3T3 cells. This effect was even more pronounced on PE coated with biomolecules. - Graphical abstract: High density polyethylene scaffolds (PE) were modified by deposition to Ar plasma. These surface reactive PE were further grafted with biomolecules to enhance cell attachment and proliferation. The changes in surface physico-chemical properties (hydrophilicity, morphology, roughness) of PE were measured. The effects of used substrates on the adhesion and growth of mouse embryonic fibroblasts were determined by a five-day cell culture study. The method for significant biocompatibility improvement was presented. Highlights: ► Argon plasma treatment altered polyethylene surface morphology and roughness ► Plasma treatment reduced contact angle of polyethylene ► Grafting of polyethylene with biomolecules further reduced contact angle ► Plasma treatment and peptide grafting increased polyethylene biocompatibility.

  6. Temperature-Dependent Deicing Properties of Electrostatically Anchored Branched Brush Layers of Poly(ethylene oxide).

    Science.gov (United States)

    Heydari, Golrokh; Tyrode, Eric; Visnevskij, Ceslav; Makuska, Ricardas; Claesson, Per M

    2016-05-03

    The hydration water of hydrophilic polymers freezes at subzero temperatures. The adsorption of such polymers will result in a hydrophilic surface layer that strongly binds water. Provided this interfacial hydration water remains liquidlike at subzero temperatures, its presence could possibly reduce ice adhesion, in particular, if the liquidlike layer is thicker than or comparable to the surface roughness. To explore this idea, a diblock copolymer, having one branched bottle-brush block of poly(ethylene oxide) and one linear cationic block, was electrostatically anchored on flat silica surfaces. The shear ice adhesion strength on such polymer-coated surfaces was investigated down to -25 °C using a homebuilt device. In addition, the temperature dependence of the ice adhesion on surfaces coated with only the cationic block, only the branched bottle-brush block, and with linear poly(ethylene oxide) was investigated. Significant ice adhesion reduction, in particular, at temperatures above -15 °C, was observed on silica surfaces coated with the electrostatically anchored diblock copolymer. Differential scanning calorimetry measurements on bulk polymer solutions demonstrate different thermal transitions of water interacting with branched and linear poly(ethylene oxide) (with hydration water melting points of about -18 and -10 °C, respectively). This difference is consistent with the low shear ice adhesion strength measured on surfaces carrying branched bottle-brush structured poly(ethylene oxide) at -10 °C, whereas no significant adhesion reduction was obtained with linear poly(ethylene oxide) at this temperature. We propose a lubrication effect of the hydration water bound to the branched bottle-brush structured poly(ethylene oxide), which, in the bulk, does not freeze until -18 °C.

  7. Temperature and heat effects on polyethylene behaviour in the presence of imperfections

    Directory of Open Access Journals (Sweden)

    Murariu Alin Constantin

    2016-01-01

    Full Text Available This paper highlights the changes of polyethylene behaviour during various loading rate as well as the influence of test temperature on the material characteristics. Passive infrared thermography (IRT method and a high speed infrared camera were used to observe the temperature changes of the sample surface during the tests. The experimental program was carried out on samples taken from PE80 polyethylene gas pipes with simulated imperfections with bilateral V-notch, U-notch and central hole. Samples have been tensile tested (TT and the results are correlated with the temperature distribution of the samples surface.

  8. Esthetic rehabilitation of anterior primary teeth using polyethylene fiber with two different approaches

    Directory of Open Access Journals (Sweden)

    M Jain

    2011-01-01

    Full Text Available An acceptable treatment approach for early childhood caries in the past may not necessarily be the best treatment option for our young patients today. Technological advances in dental materials and the approach to their use need to be considered, and the introduction of new adhesive systems, restorative materials, and the approach toward treating these teeth has yielded convincing results. Two such clinical case reports where polyethylene fibers were used as intra-canal posts and to splint the pontic fabricated with polyethylene fibers reinforced composite are reported.

  9. Modeling of the release of organic compounds from polyethylene pipes to water

    DEFF Research Database (Denmark)

    Denberg, Martin; Arvin, Erik; Hassager, Ole

    2007-01-01

    The use of polyethylene pipes in the distribution network causes contamination of the drinking water. The contaminants are a mixture of phenols, quinones, antioxidants and short polyethylene chains that in general have a functional polar oxygen group. With the use of the film-layer theory...... concentration of cofttaminants is predictable, and is equal to the product of the migrants' concentration in the polymer and its partition coefficient at the polymer and water interface. E.g. the maximum obtainable concentration of a stabilizer, as Irganox® 1010, in drinking water exposed to PE pipes used...

  10. Radiation-induced graft polymerization of acrylamide and acrylic acid onto polyethylene

    Science.gov (United States)

    Grushevskaya, L. N.; Aliev, R. E.; Kabanov, V. Ya.

    The radiation-induced grafting of acrylamide onto low-density polyethylene by the different methods and under different conditions was investigated: by the direct liquid phase method from this monomer solution in water (in neutral and acid media) and acetone, and by the pre-irradiation method from aqueous solutions as well as from its sublimated vapour. The molecular masses of polyacrylamide homopolymers were determined. The discussion and comparison of different methods of acrylamide grafting are performed. The relationship between rates of graft polymerization onto polyethylene and homopolymerization of acrylic acid in the presence of metal ions is considered.

  11. Camomile autofermentation in polyethylene glycol/dextran two-phase system

    Directory of Open Access Journals (Sweden)

    Đaković Sanja D.

    2008-01-01

    Full Text Available The objective of this study was the investigation of the extractive bioconversion of apigenin-7-O-β-glucoside in camomile ligulate flowers into apigenin by autofermentation in polyethylene glycol 6000/dextran 200000 two-phase system. In 22.5% polyethylene glycol/14% dextran aqueous two-phase system the obtained yield of apigenin in the top phase was 96.5%. In the presence of plant material that partiotioned to the interphase, the yield of apigenin in the top phase was 3.5 times higher in comparison to the model system.

  12. Capillary Break Beneath a Slab: Polyethylene Sheeting over Aggregate; Southwestern Pennsylvania (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-07-01

    This document provides content for three areas of the Building America Solution Center. First, "Insulating Closed Crawlspace Walls and Band Joist Area" describes how to install rigid foam insulation on the interior perimeter walls and band joist area in closed crawlspace foundations of homes. Second, "Removing Construction Debris from Flexible Ducts" describes how to clean flexible ducts after construction or major renovation of a home to remove debris resulting from building materials, particularly airborne dust and particulates. Third, images, CAD drawings, and a case study illustrate right and wrong ways to apply polyethylene sheeting over aggregate. Similarly, a CAD drawing is included that illustrates the use of a concrete slab over polyethylene.

  13. Ion Transport in the Polymer Electrolytes Formed between Poly(ethylene succinate) and Lithium Tetrafluoroborate.

    Science.gov (United States)

    1983-05-09

    of poly(ethylene succinate), PESc, and LIBF4 were prepared by heating the salt with the molten polymer. The com- plexes were completely amorphous over...complexes were manipulated in a nitrogen-filled glove box or in air-free apparatus. Poly(ethylene succinate)* LiBF4 complexes were prepared by heating...sample contained in an evacuable cell and PESc- LiBF4 complexes as heat pressed films between KBr plates. The pure polymer and the respective complexes

  14. Preparation of Iminodiacetic Acid-Polyethylene Glycol for Immobilized Metal Ion Affinity Partitioning

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The synthesis route was investigated and optimized for the preparation of iminodiacetic acid polyethylene glycol (IDA-PEG) for immobilized metal ion affinity partitioning in aqueous two-phaze systems. IDA PEG was synthesized from PEG in two steps by the reaction of iminodiacetic acid with a monosubetituted derivative of epichlorohydrin-activated PEG. The Cu2+ content combined with IDA-PEG was determined by atomic absorp tion spectrometry as 0.5 mol.mol-1 (PEG). Furthermore, the affinity partitioning behavior of lactate dehydrogenase in polyethylene glycol/hydroxypropyl starch aqueous two-phaze systems was studied to clarify the affinity effect of the Cu(Ⅱ)-IDA-PEG.

  15. RECENT DEVELOPMENTS IN PHOTOINITIATED CROSSLINKING OF POLYETHYLENE AND ITS INDUSTRIAL APPLICATIONS

    Institute of Scientific and Technical Information of China (English)

    Baojun Qu

    2001-01-01

    The recent developments in the photoinitiated cross-linking of polyethylene and the significant breakthrough of its industrial application are reviewed. The enhanced photo-initiation system, the dynamics of photoinitiated crosslinking, the optimum conditions, the crystal morphological structures and related properties, and the photo- and thermo-oxidation stability of photocrosslinked polyethylene (XLPE) materials have been elucidated systematically. A new technique for producing photocrosslinked XLPE-insulated wire and cable is described in detail. It can be expected that the future applications ofphotocrosslinking technique of polyolefins will be very promising.

  16. Enhancing the Dyeability of Polypropylene Fibers by Melt Blending with Polyethylene Terephthalate

    Directory of Open Access Journals (Sweden)

    Fereshteh Mirjalili

    2013-01-01

    Full Text Available Attempts were made to modify polypropylene fibers by melt blending with polyethylene terephthalate in order to enhance the dyeability of the resultant fiber. Five blends of polypropylene/polyethylene terephthalate/compatibilizer were prepared and subsequently spun into fibers. Three disperse dyes were used to dye such modified fibers at boiling and 130°C. The dyeing performance of the blend fibers, as well as the morphological, chemical, thermal, and mechanical properties, of the corresponding blends was characterized by means of spectrophotometry, polarized optical microscopy, scanning electron microscopy (SEM, FT-IR spectroscopy, differential scanning calorimetry (DSC, and tensile testing.

  17. Extrusion of polysaccharide nanocrystal reinforced polymer nanocomposites through compatibilization with poly(ethylene oxide).

    Science.gov (United States)

    Pereda, Mariana; El Kissi, Nadia; Dufresne, Alain

    2014-06-25

    Polysaccharide nanocrystals with a rodlike shape but with different dimensions and specific surface area were prepared from cotton and capim dourado cellulose, and with a plateletlike morphology from waxy maize starch granules. The rheological behavior of aqueous solutions of poly(ethylene oxide) (PEO) with different molecular weights when adding these nanoparticles was investigated evidencing specific interactions between PEO chains and nanocrystals. Because PEO also bears hydrophobic moieties, it was employed as a compatibilizing agent for the melt processing of polymer nanocomposites. The freeze-dried mixtures were used to prepare nanocomposite materials with a low density polyethylene matrix by extrusion. The thermal and mechanical behavior of ensuing nanocomposites was studied.

  18. Multiaxial deformation of polyethylene and polyethylene/clay nanocomposites: In situ synchrotron small angle and wide angle X-ray scattering study

    Energy Technology Data Exchange (ETDEWEB)

    Gurun, Bilge; Bucknall, David G.; Thio, Yonathan S.; Teoh, Chin Ching; Harkin-Jones, Eileen (GIT); (Queens)

    2013-01-10

    A unique in situ multiaxial deformation device has been designed and built specifically for simultaneous synchrotron small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) measurements. SAXS and WAXS patterns of high-density polyethylene (HDPE) and HDPE/clay nanocomposites were measured in real time during in situ multiaxial deformation at room temperature and at 55 C. It was observed that the morphological evolution of polyethylene is affected by the existence of clay platelets as well as the deformation temperature and strain rate. Martensitic transformation of orthorhombic into monoclinic crystal phases was observed under strain in HDPE, which is delayed and hindered in the presence of clay nanoplatelets. From the SAXS measurements, it was observed that the thickness of the interlamellar amorphous region increased with increasing strain, which is due to elongation of the amorphous chains. The increase in amorphous layer thickness is slightly higher for the nanocomposites compared to the neat polymer.

  19. Oxidation in ultrahigh molecular weight polyethylene and cross-linked polyethylene acetabular cups tested against roughened femoral heads in a hip joint simulator.

    Science.gov (United States)

    Taddei, Paola; Affatato, Saverio; Fagnano, Concezio; Toni, Aldo

    2006-06-01

    This study was aimed at comparing the oxidative degradation of commercial acetabular cups made of cross-linked polyethylene (XLPE) and conventional ultrahigh molecular weight polyethylene (UHMWPE). After testing against deliberately scratched CoCrMo femoral heads in a hip joint simulator, the cups, microtomed parallel to the articulating surface, were analyzed by IR spectroscopy. Due to the potential for artifacts caused by absorbed contaminants, the IR spectra were compared only after hexane extraction; actually, XLPE was found to absorb more serum than UHMWPE. The two sets of unworn acetabular cups showed different oxidation patterns with consequently different distributions of carbonyl species; unworn XLPE was characterized by lower contents of carbonyl species and hydrogen-bonded alcohols and higher contents of trans-vinylene species than unworn UHMWPE. Upon simulator testing, UHMWPE showed more significant changes in oxidation indexes and distribution of carbonyl compounds than XLPE, confirming a better wear behavior for XLPE under the adopted testing conditions.

  20. The Determination of Polyethylene Glycol in Untreated Urine Samples by High Performance Liquid Chromatography for Intestinal Permeability Studies

    DEFF Research Database (Denmark)

    Larsen, Elfinn; Pedersen, Walther Batsberg; Philipsen, E.

    1985-01-01

    Polyethylene glycol in urine samples has been investigated by high performance liquid chromatography. The molecular weights ranged from 634 to 1338. The urine samples were applied to the chromatographic system without any pre-treatment. For samples with a concentration of 0.2% polyethylene glycol...

  1. Platelet responses to dynamic biomaterial surfaces with different poly(ethylene glycol) and polyrotaxane molecular architectures constructed on gold substrates.

    Science.gov (United States)

    Kakinoki, Sachiro; Yui, Nobuhiko; Yamaoka, Tetsuji

    2013-11-01

    Four different dynamic biomaterial surfaces with different molecular architectures were prepared using two hydrophilic polymers: poly(ethylene glycol) and polyrotaxanes containing α-cyclodextrin. Either one or both terminals of the poly(ethylene glycol) or polyrotaxanes were immobilized onto a gold substrate via Au-S bonds, resulting in poly(ethylene glycol)-graft, polyrotaxanes-graft, poly(ethylene glycol)-loop, and polyrotaxanes-loop structures. Human platelet adhesion was suppressed more effectively on the graft surfaces than on the loop surfaces for both poly(ethylene glycol) and polyrotaxanes due to the high mobility of graft polymer chains with a free terminal. Moreover, the platelets adhered to the polyrotaxane surfaces much less than the poly(ethylene glycol) surfaces, possibly because of the mobile nature of the α-cyclodextrin molecules that were threaded on the poly(ethylene glycol) chain. Actin filament assembly in adherent platelets was also greatly prevented on the poly(ethylene glycol)/polyrotaxanes-graft surfaces in comparison with the corresponding loop surfaces. A clear correlation between the numbers and areas of adherent platelets on these surfaces suggests that platelet adhesion and activation were dominated by the platelet GPIIb/IIIa-adsorbed fibrinogen interaction. These results indicate that both of the different modes of dynamic features, sliding/rotation of α-cyclodextrin and polymer chain mobility, effectively suppressed platelet adhesion in spite of the similar hydrophilicity. This research affords a novel chemical strategy for designing hemocompatible biomaterial surfaces.

  2. Preparation and space charge accumulation characteristics of acrylate-grafted polyethylenes using reaction extrusion; Hanno oshidashi ni yoru acrylate polyethylene no seizo to kukan denka chikuseki tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Lee, C.; Okamoto, T. [Central Research Institute of Electric Power Industry, Tokyo (Japan); Suh, K. [Korea University, Seoul (Korea, Republic of)

    1998-10-01

    Space charge accumulation characteristics of chemically modified polyethylenes which were grafted with acrylates like acrylic acid and n-butylacrylate using reactive extrusion were investigated. In LDPE-g-Acrylic Acid (LDPE-g-AA), it was showed that the heterocharge found in low-density polyethylenes (LDPE) decreased with the increase of acrylic acid graft ratio and changed to the homocharge formation above 0.1 wt% due to the introduction of carbonyls. Conduction currents and charge mobilities of LDPE-g-AA decreased with the increase of AA graft ratio, while the conduction mechanism remains unchanged. However, in the LDPE-g-n-Buthylacrylate (LDPE-g-nBA), the change of space charge accumulation characteristics were not observed and charge mobilities of them not affected by the graft ratio. The differences of space charge formation between two grafted polyethylenes were closely related to the ability of trap site in monomer grafted to LDPE and the chemical structure of it. 18 refs., 11 figs.

  3. Attachment of human primary osteoblast cells to modified polyethylene surfaces.

    Science.gov (United States)

    Poulsson, Alexandra H C; Mitchell, Stephen A; Davidson, Marcus R; Johnstone, Alan J; Emmison, Neil; Bradley, Robert H

    2009-04-09

    Ultra-high-molecular-weight polyethylene (UHMWPE) has a long history of use in medical devices, primarily for articulating surfaces due to its inherent low surface energy which limits tissue integration. To widen the applications of UHMWPE, the surface energy can be increased. The increase in surface energy would improve the adsorption of proteins and attachment of cells to allow tissue integration, thereby allowing UHMWPE to potentially be used for a wider range of implants. The attachment and function of human primary osteoblast-like (HOB) cells to surfaces of UHMWPE with various levels of incorporated surface oxygen have been investigated. The surface modification of the UHMWPE was produced by exposure to a UV/ozone treatment. The resulting surface chemistry was studied using X-ray photoelectron spectroscopy (XPS), and the topography and surface structure were probed by atomic force microscopy (AFM) and scanning electron microscopy (SEM), which showed an increase in surface oxygen from 11 to 26 atom % with no significant change to the surface topography. The absolute root mean square roughness of both untreated and UV/ozone-treated surfaces was within 350-450 nm, and the water contact angles decreased with increasing oxygen incorporation, i.e., showing an increase in surface hydrophilicity. Cell attachment and functionality were assessed over a 21 day period for each cell-surface combination studied; these were performed using SEM and the alamarBlue assay to study cell attachment and proliferation and energy-dispersive X-ray (EDX) analysis to confirm extracellular mineral deposits, and total protein assay to examine the intra- and extracellular protein expressed by the cells. HOB cells cultured for 21 days on the modified UHMWPE surfaces with 19 and 26 atom % oxygen incorporated showed significantly higher cell densities compared to cells cultured on tissue culture polystyrene (TCPS) from day 3 onward. This indicated that the cells attached and proliferated more

  4. The increase in cobalt release in metal-on-polyethylene hip bearings in tests with third body abrasives.

    Science.gov (United States)

    de Villiers, Danielle; Traynor, Alison; Collins, Simon N; Shelton, Julia C

    2015-09-01

    Hypersensitivity reactions in patients receiving metal-on-metal hip replacements have been attributed to corrosion products as observed by elevated cobalt and chromium ions in the blood. Although the majority of cases are reported in metal-on-metal, incidences of these reactions have been reported in the metal-on-polyethylene patient population. To date, no in vitro study has considered cobalt release for this bearing combination. This study considered four 28 mm and seven 52 mm diameter metal-on-polyethylene bearings tested following ISO standard hip simulator conditions as well as under established abrasive conditions. These tests showed measurable cobalt in all bearings under standard conditions. Cobalt release, as well as polyethylene wear, increased with diameter, increasing from 52 to 255 ppb. The introduction of bone cement particles into the articulation doubled polyethylene wear and cobalt release while alumina particles produced significant damage on the heads demonstrated by cobalt levels of 70,700 ppb and an increased polyethylene wear from a mean value of 9-160 mm(3)/mc. Cobalt release was indicative of head damage and correlated with polyethylene wear at the next gravimetric interval. The removal of third body particles resulted in continued elevated cobalt levels in the 52 mm diameter bearings tested with alumina compared to standard conditions but the bearings tested with bone cement particles returned to standard levels. The polyethylene wear in the bone cement tested bearings also recovered to standard levels, although the alumina tested bearings continued to wear at a higher rate of 475 mm(3)/mc. Cobalt release was shown to occur in metal-on-polyethylene bearings indicating damage to the metal head resulting in increased polyethylene wear. While large diameter metal-on-polyethylene bearings may provide an increased range of motion and a reduced dislocation risk, increased levels of cobalt are likely to be released and this needs to be fully

  5. Polyhomologation based on in situ generated Boron-thexyl-silaboracyclic initiating sites: a novel strategy towards the synthesis of polyethylene-based complex architectures

    KAUST Repository

    Zhang, Zhen

    2015-04-10

    A novel strategy, based on the in situ generated Boron-thexyl-silaboracyclic initiating sites for the polyhomologation of dimethylsulfoxonium methylide, has been developed for the synthesis of complex polyethylene-based architectures. As examples, the synthesis of a 4-arm polyethylene star, three (polystyrene)(polyethylene)2 3-miktoarm stars and a PE-branched double graft copolymers are given.

  6. Neutron attenuation characteristics of polyethylene, polyvinyl chloride, and heavy aggregate concrete and mortars.

    Science.gov (United States)

    Abdul-Majid, S; Othman, F

    1994-03-01

    Polyethylene and polyvinyl chloride pellets were introduced into concrete to improve its neutron attenuation characteristics while several types of heavy coarse aggregates were used to improve its gamma ray attenuation properties. Neutron and gamma ray attenuation were studied in concrete samples containing coarse aggregates of barite, pyrite, basalt, hematite, and marble as well as polyethylene and polyvinyl chloride pellets in narrow-beam geometry. The highest neutron attenuation was shown by polyethylene mortar, followed by polyvinyl chloride mortar; barite and pyrite concrete showed higher gamma ray attenuation than ordinary concrete. Broad-beam and continuous (infinite) medium geometries were used to study the neutron attenuation of samples containing polymers at different concentrations with and without heavy aggregates, the fitting equations were established, and from these the neutron removal coefficients were deduced. In a radiation field of neutrons and gamma rays, the appropriate concentration of polymer and heavy aggregate can be selected to give the optimum total dose attenuation depending on the relative intensities of each type of radiation. This would give much better design flexibility over ordinary concrete. The compressive strength tests performed on mortar and concrete samples showed that their value, in general, decreases as polymer concentration increases and that the polyvinyl chloride mortar showed higher values than the polyethylene mortar. For general construction purposes, the compression strength was considered acceptable in these samples.

  7. Track structure in polyethylene terephthalate irradiated by heavy ions: Let dependence of track diameter

    CERN Document Server

    Apel, P; Trautmann, C; Vutsadakis, V

    1999-01-01

    The structure of latent tracks in polyethylene terephthalate is studied using chemical etching combined with a conductometric technique. Geometrical parameters of the latent tracks for the range of the electronic energy loss (dE/dx) between 3 to 24 keV/nm are estimated. The dependence of the track core and track halo size on the energy loss is analyzed.

  8. 75 FR 81574 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of...

    Science.gov (United States)

    2010-12-28

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary... strip (PET film) from India in response to a request from SRF Limited (SRF). The period of review (POR... benefitted from countervailable subsidies provided on the production and export of PET film from India....

  9. 78 FR 48147 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of...

    Science.gov (United States)

    2013-08-07

    ...] Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of Countervailing Duty...) from India for the period of review (POR) January 1, 2011, through December 31, 2011. We preliminarily... Strip from India (Preliminary Decision Memorandum), dated concurrently with these results and...

  10. 76 FR 76943 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Final Results of Antidumping Duty...

    Science.gov (United States)

    2011-12-09

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From India: Final Results... terephthalate film (PET Film) from India.\\1\\ This review covers one producer/exporter of subject merchandise... Terephthalate Film, Sheet, and Strip From India: Preliminary Results of Antidumping Duty Administrative...

  11. 78 FR 79400 - Polyethylene Terephthalate Film, Sheet, and Strip From the People's Republic of China: Initiation...

    Science.gov (United States)

    2013-12-30

    ..., sheet, and strip (``PET film'') from the People's Republic of China (``PRC'') meets the statutory and... Terephthalate Film, Sheet, and Strip from the People's Republic of China; A-570-924; Request for New Shipper... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From the People's...

  12. 77 FR 73428 - Polyethylene Terephthalate Film, Sheet, and Strip From the People's Republic of China...

    Science.gov (United States)

    2012-12-10

    ... Film, Sheet, and Strip from the People's Republic of China: Final Determination of Sales at Less Than... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From the People's Republic of China: Preliminary Results of Administrative Review; 2010-2011 AGENCY: Import...

  13. Poly(ethylene glycol)-containing hydrogel surfaces for antifouling applications in marine and freshwater environments

    NARCIS (Netherlands)

    Ekblad, T.; Bergström, G.; Ederth, T.; Conlan, S.L.; Mutton, R.; Clare, A.S.; Wang, S.; Liu, Y.; Zhao, Q.; D'Souza, F.; Donnelly, G.T.; Willemsen, P.R.; Pettitt, M.E.; Callow, M.E.; Callow, J.A.; Liedberg, B.

    2008-01-01

    This work describes the fabrication, characterization, and biological evaluation of a thin protein-resistant poly(ethylene glycol) (PEG)-based hydrogel coating for antifouling applications. The coating was fabricated by free-radical polymerization on silanized glass and silicon and on polystyrene-co

  14. The Aging Study on Polyethylene Terephthalate with Surface Modification by Water Vapor Plasma

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The aging effects of the contact angle and surface energy on polyethylene tereph thalate (PET) have been investigated with surface modification by water vapor plasma. The experimental results show that the contact angle of water and PET decreases obviously and sur face energy increases. However, with the increase of the aging time, the contact angle and surface energy change back gradually to original state.

  15. in vivo degradation of polyurethane foam with 55 wt % polyethylene glycol

    NARCIS (Netherlands)

    Broekema, Ferdinand I.; van Leeuwen, M. Barbara M.; Van Minnen, Baucke; Bos, Rudolf R. M.

    2015-01-01

    Most topical hemostatic agents are based on animal-derived products like collagen and gelatin. They carry the potential risk of pathogen transmission while adjustments in the production process of these materials are limited. A synthetic hemostatic agent based on polyurethane (PU) and polyethylene g

  16. Viscoelastic behavior and durability of steel wire - reinforced polyethylene pipes under a high internal pressure

    NARCIS (Netherlands)

    Ivanov, S.; Anoshkin, A.N.; Zuyko, V.Yu

    2011-01-01

    The strength tests of steel-wire-reinforced polyethylene pipe specimens showed that, under a constant internal pressure exceeding 80% of their short-term ultimate pressure, the fracture of the specimens occurred in less than 24 hours. At pressures slightly lower than this level, some specimens did n

  17. Biodegradable mulch performed comparably to polyethylene in high tunnel tomato (Solanum lycopersicum L.) production.

    Science.gov (United States)

    Cowan, Jeremy S; Miles, Carol A; Andrews, Preston K; Inglis, Debra A

    2014-07-01

    High tunnels in the cool climate of north western Washington state improve the growing environment for crops otherwise suited to warmer climates. Biodegradable mulch may improve the sustainability of high tunnel vegetable production if it performs comparably to polyethylene. Four biodegradable mulch treatments (BioAgri, BioTelo, WeedGuardPlus and SB-PLA-10/11/12) were compared to black polyethylene and bare ground in high tunnels and open field settings to assess the impact of production system and mulch treatment on weed control, tomato yield, and fruit quality. Fewer weeds grew in high tunnels than in the open field. High tunnels increased total and marketable fruit yields and increased individual fruit weight. High tunnel production increased juice content and pH of tomato fruit, but decreased total soluble solids, titratable acidity, and total phenolics compared to the open field. All mulch treatments except SB-PLA-10 controlled weeds. BioAgri, BioTelo and polyethylene increased total yields by 20%, though marketability was reduced 14% compared to bare ground and WeedGuardPlus treatments. High tunnels can improve tomato yield and affect fruit quality in north western Washington. Biodegradable plastic mulches performed comparably to polyethylene in weed control, tomato yield, and fruit quality and may, therefore, improve the sustainability of high tunnel vegetable production. © 2013 Society of Chemical Industry.

  18. Utilization of Polyethylene Waste and Polypropylene Wastes for Formation of Fine Copper Ore Concentrates

    Science.gov (United States)

    Szyszka, Danuta; Więckowska, Jadwiga

    2016-10-01

    The possibilities for utilization of polyethylene waste and polypropylene waste as a binding material for formation of fine grain of copper ore concentrate in Hake Rheomix were examined. The optimum parameters of the formation processes were established. Strength, thermal and microscopic properties the products obtained were determined.

  19. 75 FR 49900 - Polyethylene Terephthalate Film, Sheet, and Strip From Brazil: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-08-16

    ... Sales at Less than Fair Value: Certain Frozen and Canned Warmwater Shrimp From Brazil, 69 FR 76910..., and Strip from Brazil, 73 FR 55035, 55036 (September 24, 2008) (Final Determination). The Department... Than Fair Value: Polyethylene Terephthalate Film, Sheet, and Strip from Brazil, 73 FR 24560 (May...

  20. Well-Defined Polyethylene-Based Random, Block, and Bilayered Molecular Cobrushes

    KAUST Repository

    Zhang, Hefeng

    2015-06-09

    Novel well-defined polyethylene-based random, block, and bilayered molecular cobrushes were synthesized through the macromonomer strategy. Two steps were involved in this approach: (i) synthesis of norbornyl-terminated macromonomers of polyethylene (PE), polycaprolactone (PCL), poly(ethylene oxide) (PEO), and polystyrene (PS), as well as polyethylene-b-polycaprolactone (PE-b-PCL), by esterification of the hydroxyl-terminated precursors (PE, PCL, PEO, PS, and PE-b-PCL) with 5-norbornene-2-carboxylic acid and (ii) ring-opening metathesis (co)polymerization of the resulting macromonomers to afford the PE-based molecular cobrushes. The PE-macromonomers were synthesized by polyhomologation of dimethylsulfoxonium methylide, while the others by anionic polymerization. Proton nuclear magnetic resonance spectroscopy (1H NMR) and high-temperature gel permeation chromatography (HT-GPC) were used to imprint the molecular characteristics of all macromonomers and molecular brushes and differential scanning calorimetry (DSC) for the thermal properties. The bilayered molecular cobrushes of P(PE-b-PCL) adopt a wormlike morphology on silica wafer as visualized by atomic force microscopy (AFM). © 2015 American Chemical Society.

  1. Polystyrene-b-polyethylene oxide block copolymer membranes, methods of making, and methods of use

    KAUST Repository

    Peinemann, Klaus-Viktor

    2015-04-16

    Embodiments of the present disclosure provide for polystyrene-b-polyethylene oxide (PS-b-PEO) block copolymer nanoporous membranes, methods of making a PS-b-PEO block copolymer nanoporous membrane, methods of using PS-b-PEO block copolymer nanoporous membranes, and the like.

  2. Physical ageing studies of poly(ethylene terephthalate) using SANS and DSC

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, Andrew [Department of Metallurgy and Materials, University of Birmingham, Birmingham B15 2TT (United Kingdom); Gordon, Duncan [Department of Metallurgy and Materials, University of Birmingham, Birmingham B15 2TT (United Kingdom); King, Stephen [ISIS Spallation Neutron Source, Rutherford-Appleton Laboratory, Didcot, Oxfordshire OX11 0QX (United Kingdom); Jenkins, Mike [Department of Metallurgy and Materials, University of Birmingham, Birmingham B15 2TT (United Kingdom)]. E-mail: M.J.Jenkins@bham.ac.uk

    2006-11-15

    The process of physical ageing in a blend of deuterated and hydrogenated poly(ethylene terephalate) has been investigated using a combination of differential scanning calorimetry (DSC) and small-angle neutron scattering (SANS). The development of an endothermic peak on the glass transition has been shown using DSC. Furthermore, the radius of gyration was found to decrease during physical ageing.

  3. Stress relaxation and reversed flow of low-density polyethylene melts following uniaxial extension

    DEFF Research Database (Denmark)

    Huang, Qian; Rasmussen, Henrik K.; Skov, Anne Ladegaard

    2012-01-01

    The extensional dynamics of two low-density polyethylene melts Lupolen 3020D and Lupolen 1840D, both showing a stress overshoot in start-up of uniaxial extension [Rasmussen, H. K., J. K. Nielsen, A. Bach, and O.Hassager, 'Viscosity overshoot in the start-up of uniaxial elongation of low density p...

  4. Unique Crystal Orientation of Poly(ethylene oxide) Thin Films by Crystallization Using a Thermal Gradient

    DEFF Research Database (Denmark)

    Gbabode, Gabin; Delvaux, Maxime; Schweicher, Guillaume

    2017-01-01

    Poly(ethylene oxide), (PEO), thin films of different thicknesses (220, 450, and 1500 nm) and molecular masses (4000, 8000, and 20000 g/mol) have been fabricated by spin-coating of methanol solutions onto glass substrates. All these samples have been recrystallized from the melt using a directional...

  5. 75 FR 36679 - Polyethylene Retail Carrier Bags From China, Malaysia, and Thailand; Determinations

    Science.gov (United States)

    2010-06-28

    ... instituted these reviews on July 1, 2009 (74 FR 31750, July 2, 2009) and determined on October 5, 2009 that it would conduct full reviews (74 FR 54069, October 21, 2009). Notice of the scheduling of the... COMMISSION Polyethylene Retail Carrier Bags From China, Malaysia, and Thailand; Determinations On the...

  6. 76 FR 47558 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of...

    Science.gov (United States)

    2011-08-05

    ... countervailable subsidies provided on the production and export of PET Film from India. See the ``Preliminary... performance. See PET Film Final Determination at ``Pre-Shipment and Post-Shipment Export Financing.'' There is... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary...

  7. Rheological behaviour of polyethylene with peroxide crosslinking agent. Ismaeil Ghasemi, Peter Szabo and Henrik Koblitz Rasmussen

    DEFF Research Database (Denmark)

    Rasmussen, Henrik K.; Ghasemi, Ismaeil; Szabo, Peter

    2003-01-01

    due to a peroxide cross-linking reaction of low-density polyethylene (LDPE) was tracked by a combination of creep tests and differential scanning calorimetry (DSC) tests in isothermal conditions. The peroxide was di-cumyl peroxide and its concentration was 2 wt%. The experiments were carried out...

  8. THE GRAFTING OF MALEIC-ANHYDRIDE ON HIGH-DENSITY POLYETHYLENE IN AN EXTRUDER

    NARCIS (Netherlands)

    GANZEVELD, KJ; JANSSEN, LPBM

    The grafting of maleic anhydride (MAH) on high density polyethylene in a counter-rotating twin screw extruder has been studied. As the reaction kinetics appear to be affected by mass transfer, good micro mixing in the extruder is important. Due to the competing mechanisms of increasing mixing and

  9. The influence of titanium dioxide additive on the short-term DC breakdown strength of polyethylene

    DEFF Research Database (Denmark)

    Khalil, M. S; Henk, Peter O; Henriksen, Mogens

    1990-01-01

    The effect of the addition of 1% by weight of titanium dioxide fine particles to low-density polyethylene (LDPE) on the short-term DC breakdown strength of the LDPE was investigated using direct and reverse polarity voltages. The samples used were cylinders of both plain and doped materials...

  10. THE GRAFTING OF MALEIC-ANHYDRIDE ON HIGH-DENSITY POLYETHYLENE IN AN EXTRUDER

    NARCIS (Netherlands)

    GANZEVELD, KJ; JANSSEN, LPBM

    1992-01-01

    The grafting of maleic anhydride (MAH) on high density polyethylene in a counter-rotating twin screw extruder has been studied. As the reaction kinetics appear to be affected by mass transfer, good micro mixing in the extruder is important. Due to the competing mechanisms of increasing mixing and de

  11. in vivo degradation of polyurethane foam with 55 wt % polyethylene glycol

    NARCIS (Netherlands)

    Broekema, Ferdinand I.; van Leeuwen, M. Barbara M.; Van Minnen, Baucke; Bos, Rudolf R. M.

    2015-01-01

    Most topical hemostatic agents are based on animal-derived products like collagen and gelatin. They carry the potential risk of pathogen transmission while adjustments in the production process of these materials are limited. A synthetic hemostatic agent based on polyurethane (PU) and polyethylene g

  12. Outcome in design-specific comparisons between highly crosslinked and conventional polyethylene in total hip arthroplasty

    DEFF Research Database (Denmark)

    Johanson, Per-Erik; Furnes, Ove; Ivar Havelin, Leif

    2017-01-01

    loosening (p Marathon cup and the Trilogy cup did not show such differences. Interpretation - Whether XLPE has any advantage over CPE regarding revision risk may depend on the properties of the polyethylene materials being compared, as well as the respective cup designs...

  13. Selective etching of semicrystalline polymers CF4 gas plasma treatment of poly(ethylene)

    NARCIS (Netherlands)

    Olde riekerink, M.B.; Terlingen, J.G.A.; Terlingen, J.G.A.; Engbers, G.H.M.; Feijen, Jan

    1999-01-01

    A series of poly(ethylene) (PE) films with different degrees of crystallinity was treated with a radio-frequency tetrafluoromethane (CF4) gas plasma (48-49 W, 0.06-0.07 mbar, and continuous vs pulsed treatment). The etching behavior and surface chemical and structural changes of the PE films were

  14. Protein adsorption on gradient surfaces on polyethylene prepared in a shielded gas plasma

    NARCIS (Netherlands)

    Spijker, Hendrikje; Bos, Roelof; van Oeveren, Willem; de Vries, Jacob; Busscher, Hendrik

    1999-01-01

    In this study, a new and simple method is described to prepare wettability gradients on polymers by means of glow discharge in a partly shielded argon plasma. The surface characteristics of thus prepared gradients on low density polyethylene were determined by contact angle measurements and electron

  15. Selective Etching of Semicrystalline Polymers: CF4 Gas Plasma Treatment of Poly(ethylene)

    NARCIS (Netherlands)

    Olde Riekerink, M.B.; Terlingen, J.G.A.; Engbers, G.H.M.; Feijen, J.

    1999-01-01

    A series of poly(ethylene) (PE) films with different degrees of crystallinity was treated with a radio-frequency tetrafluoromethane (CF4) gas plasma (48-49 W, 0.06-0.07 mbar, and continuous vs pulsed treatment). The etching behavior and surface chemical and structural changes of the PE films were st

  16. Dynamic mechanical properties of methacrylic-acid-grafted polyethylene films. [Gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Nakano, Y.; Omichi, H.; MacKnight, W.J.

    1984-04-01

    A dynamical mechanical relaxation study has been made of low density polyethylene films to which methacrylic acid has been grafted by ..gamma.. irradiation. The grafted films retain the original degree of crystallinity and show only slight changes in melting points and melt viscosities, indicating that the grafted methacrylic acid side chains are long, few in number, and completely phase separated from the polyethylene matrix. Three dispersion regions are observed in plots of the loss modulus, E'' vs. temperature at constant frequency and these are labeled ..gamma.., ..beta.., ..cap alpha..', in order of increasing temperature. The ..cap alpha..' peak, above 215/sup 0/C, was assigned to microbrownian segmental motions accompanying the T/sub g/ of polymethacrylic acid. The ..beta.. peak, at -20/sup 0/C, was assigned to motions accompanying the T/sub g/ of branched polyethylene, and the ..gamma.. peak, at -120/sup 0/C, was assigned to local motions of a few CH/sub 2/ sequences in polyethylene.

  17. Predictive functional control(PFC) and its application in Chlorinated polyethylene process

    Institute of Scientific and Technical Information of China (English)

    李鸿亮; 苏宏业; 刘军; 褚健

    2003-01-01

    The main principle and the characteristic of Predictive Functional Control (PFC) strategy are presented in this paper and the corresponding control system aid design software APC-PFC is also introduced. For a chlorinated polyethylene (CPE) process, a design scheme of cascade predictive functional control system is described and the control performance is improved obviously.

  18. Iridescent cellulose nanocrystal/polyethylene oxide composite films with low coefficient of thermal expansion

    Science.gov (United States)

    Jairo A. Diaz; Julia L. Braun; Robert J. Moon; Jeffrey P. Youngblood

    2015-01-01

    Simultaneous control over optical and thermal properties is particularly challenging and highly desired in fields like organic electronics. Here we incorporated cellulose nanocrystals (CNCs) into polyethylene oxide (PEO) in an attempt to preserve the iridescent CNC optical reflection given by their chiral nematic organisation, while reducing the composite thermal...

  19. Gas-permeation properties of poly(ethylene oxide) poly(butylene terephthalate block copolymers

    NARCIS (Netherlands)

    Metz, S.J.; Mulder, M.H.V.; Wessling, M.

    2004-01-01

    This paper reports the gas-permeation properties of poly(ethylene oxide) (PEO) poly(butylene terephthalate) (PBT) segmented multiblock copolymers. These block copolymers allow a precise structural modification by the amount of PBT and the PEO segment length, enabling a systematic study of the relati

  20. Phase separation of aqueous mixtures of poly(ethylene oxide) and dextran

    NARCIS (Netherlands)

    Edelman, M.W.; Linden, van der E.; Tromp, R.H.

    2003-01-01

    Abstract: The phase behavior of aqueous mixtures of poly(ethylene oxide) (PEO) and dextran is studied as a function of the polymer concentration, the PEO molar mass, and temperature. The molar mass distributions of the two polymers in the coexisting phases are measured. From the temperature dependen

  1. MICROWAVE-ACCELERATED SUZUKI CROSS-COUPLING REACTION IN POLYETHYLENE GLYCOL (PEG)

    Science.gov (United States)

    Polyethylene glycol (PEG) is found to be an inexpensive and nontoxic reaction medium for the microwave-assisted Suzuki cross-coupling of arylboronic acids with aryl halides. This environmentally friendly microwave protocol offers the ease of operation and enables the recyclabilit...

  2. Accumulation of magnetic iron oxide nanoparticles coated with variably sized polyethylene glycol in murine tumors

    DEFF Research Database (Denmark)

    Larsen, Esben Kjær Unmack; Nielsen, Thomas; Wittenborn, Thomas;

    2012-01-01

    polyethylene glycol (PEG). Despite its frequent use, the influence of PEG coatings on the physicochemical and biological properties of iron nanoparticles has hitherto not been studied in detail. To address this, we studied the effect of 333–20 000 Da PEG coatings that resulted in larger hydrodynamic size...

  3. The permeability of polyethylene glycol oligomers in the isolated perfused rat liver

    NARCIS (Netherlands)

    Mengelers, M.J.B.

    1995-01-01

    Processes occuring in the liver are very important for the description of the kinetic behaviour of drugs and compounds present in food. Therefore this research was focussed on dispersion and distribution processes occuring in the rat liver. Polyethylene glycols were used as test compounds because th

  4. Molar Mass and Second Virial Coefficient of Polyethylene Glycol by Vapor Pressure Osmometry

    Science.gov (United States)

    Schwinefus, Jeffrey J.; Checkal, Caleb; Saksa, Brian; Baka, Nadia; Modi, Kalpit; Rivera, Carlos

    2015-01-01

    In this laboratory experiment, students determine the number-average molar masses and second virial coefficients of polyethylene glycol (PEG) polymers ranging in molar mass from 200 to 1500 g mol[superscript -1] using vapor pressure osmometry (VPO). Students assess VPO in relation to accurate molar mass calculations of PEG polymers. Additionally,…

  5. Microbial adhesion to poly(ethylene oxide) brushes: Influence of polymer chain length and temperature

    NARCIS (Netherlands)

    Roosjen, A.; Mei, van der H.C.; Busscher, H.J.; Norde, W.

    2004-01-01

    Glass surfaces were modified by end-grafting poly(ethylene oxide) (PEO) chains having molecular weights of 526, 2000, or 9800 Da. Characterization using water contact angles, ellipsometry, and X-ray photoelectron spectroscopy confirmed the presence of the PEO brushes on the surface with estimated le

  6. Microbial adhesion to poly(ethylene oxide) brushes : Influence of polymer chain length and temperature

    NARCIS (Netherlands)

    Roosjen, A; van der Mei, HC; Busscher, HJ; Norde, W

    2004-01-01

    Glass surfaces were modified by end-grafting poly(ethylene oxide) (PEO) chains having molecular weights of 526,2000, or 9800 Da. Characterization using water contact angles, ellipsometry, and X-ray photoelectron spectroscopy confirmed the presence of the PEO brushes on the surface with estimated len

  7. Importance of poly(ethylene glycol) conformation for the synthesis of silver nanoparticles in aqueous solution

    Science.gov (United States)

    In the formation of silver nanoparticles (NPs) using silver nitrate in a poly(ethylene glycol) (PEG) aqueous solution, which acts as both a reducing and stabilizing agent, the PEG chain structure was found to play a significant role. Even though PEG 100 (100 kg/mol) has limited reducing sites of hyd...

  8. Pelvic mass secondary to polyethylene and titanium alloy wear debris resulting in recurrent deep vein thrombosis.

    Science.gov (United States)

    Shilt, J S; Rozencwaig, R; Wilson, M R

    1997-12-01

    External venous compression can be a cause of deep vein thrombosis (DVT). This is an unusual case of acetabular component failure and resultant polyethylene and titanium alloy wear debris that presented as a pelvic mass and resulted in iliac vein compression and subsequent DVT.

  9. Finite Element Analysis of the Polyethylene Pipe Heating during Welding with a Heating Plate

    Directory of Open Access Journals (Sweden)

    Adelin Tută

    2008-10-01

    Full Text Available In this paper we present the results of a study based on the finite element method applied to end-to-end polyethylene pipe welding. In the experiment we used the ANSYS 6.1 finite element program that succeeds to accurately capture many common physical phenomena.

  10. In situ synthesis of nano clay filled polyethylene using polymer support metallocenes catalyst system

    Energy Technology Data Exchange (ETDEWEB)

    Murthy, Z.V.P.; Parikh, Parimal A., E-mail: zvpm@ched.svnit.ac.in [Sardar Vallabhbhai National Institute of Technology, Gujarat (India). Chemical Engineering Department; Rajesh, Smitha [Sardar Vallabhbhai National Institute of Technology, Gujarat (India). Sardar Vallabhbhai National Institute of Technology. Chemical Engineering Department

    2011-07-01

    In situ ethylene polymerizations were performed using bis(cyclopentadiene)titanium dichloride supported on poly ethersulfone as catalyst. The bis(cyclopentadiene)titanium dichloride supported on poly ethersulfone catalyst activity estimated by ethylene polymerization was 360 kg PE/mol Ti/h. During polymerization the fillers used were montmorillonite nano clays having surface modifications with 35-45 wt % dimethyl dialkyl(14-18)amine (FA) and 25-30 wt % trimethyl stearyl ammonium (FB). These fillers were pretreated with methylaluminoxine (MAO; co catalyst) for better dispersion onto the polymer matrix. The formation of polyethylene within the whole matrix was confirmed by FTIR studies. It was found that the nature of nano filler did not have any remarkable effect on the melting characteristics of the polymer. TGA study indicates that nano clay FB filled polyethylene has higher thermal stability than nano clay FA filled polyethylene. The melting temperature of the obtained polyethylenes was 142 degree C, which corresponds to that synthesized by the polyether sulfone supported catalyst. (author)

  11. Diethylamine functionalized polyethylene glycol as a novel and efficient catalyst for Knoevenagel condensation

    Indian Academy of Sciences (India)

    Wen Ye; Hong Jiang; Xian-Cao Yang

    2011-05-01

    The Knoevenagel condensation of aromatic aldehydes with active methylene is an efficient reaction for carbon-carbon double bond formation. A rapid, efficient, and ecofriendly protocol for the Knoevenagel condensation of active methylene compounds with aldehydes has been developed with diethylamine functionalized polyethylene glycol-600 (PEG-600) as catalyst with good to excellent yields at room temperature without solvent.

  12. Direct subcutaneous injection of polyethylene particles over the murine calvaria results in dramatic osteolysis.

    Science.gov (United States)

    Rao, Allison J; Zwingenberger, Stefan; Valladares, Roberto; Li, Chenguang; Lane Smith, Robert; Goodman, Stuart B; Nich, Christophe

    2013-07-01

    The murine calvarial model has been widely employed for the in vivo study of particle-induced osteolysis, the most frequent cause of aseptic loosening of total joint replacements. Classically, this model uses an open surgical technique in which polyethylene (PE) particles are directly spread over the calvarium for the induction of osteolysis. We evaluated a minimally invasive modification of the calvarial model by using a direct subcutaneous injection of PE particles. Polyethylene (PE) particles were injected subcutaneously over the calvaria of C57BL6J ten-week-old mice ("injection" group) or were implanted after surgical exposure of the calvaria ("open" group) (n = 5/group). For each group, five additional mice received no particles and served as controls. Particle-induced osteolysis was evaluated two weeks after the procedure using high-definition microCT imaging. Polyethylene particle injection over the calvaria resulted in a 40% ± 1.8% decrease in the bone volume fraction (BVF), compared to controls. Using the "open surgical technique", the BVF decreased by 16% ± 3.8% as compared to controls (p subcutaneous injection of PE particles over the murine calvaria produced more profound resorption of bone. Polyethylene particle implantation by injection is less invasive and reliably induces osteolysis to a greater degree than the open technique. This subcutaneous injection method will prove useful for repetitive injections of particles, and the assessment of potential local or systemic therapies.

  13. Polyethylene as a source of artifacts in the paper chromatography of chlorinated hydrocarbon insecticides

    Science.gov (United States)

    Van Valin, C.C.; Kallman, B.J.; O'Donnell, J.J

    1963-01-01

    The introduction of artifacts from vessels, materials, and chemicals is a serious problem in the study of pesticide residues. It is therefore of interest to record findings that polyethylene wash bottles contain substances soluble in organic solvents and reactive with the silver nitrate chromogenic spray commonly employed in the paper chromatographic analysis of chlorinated organic insecticides.

  14. The effect of temperature cycling on the DC conductivity of polyethylene

    DEFF Research Database (Denmark)

    Khalil, M.S.; Henriksen, Mogens; Henk, Peter O

    1992-01-01

    The effect of temperature cycling between 40°C and 80°C during combined temperature and electric field conditioning on the DC conductivity of LDPE (low-density polyethylene) has been studied and compared with DC conductivity results using a constant temperature of 80°C and an identical sample under...

  15. Polyethylene encapsulatin of nitrate salt wastes: Waste form stability, process scale-up, and economics

    Energy Technology Data Exchange (ETDEWEB)

    Kalb, P.D.; Heiser, J.H. III; Colombo, P.

    1991-07-01

    A polyethylene encapsulation system for treatment of low-level radioactive, hazardous, and mixed wastes has been developed at Brookhaven National Laboratory. Polyethylene has several advantages compared with conventional solidification/stabilization materials such as hydraulic cements. Waste can be encapsulated with greater efficiency and with better waste form performance than is possible with hydraulic cement. The properties of polyethylene relevant to its long-term durability in storage and disposal environments are reviewed. Response to specific potential failure mechanisms including biodegradation, radiation, chemical attack, flammability, environmental stress cracking, and photodegradation are examined. These data are supported by results from extensive waste form performance testing including compressive yield strength, water immersion, thermal cycling, leachability of radioactive and hazardous species, irradiation, biodegradation, and flammability. The bench-scale process has been successfully tested for application with a number of specific problem'' waste streams. Quality assurance and performance testing of the resulting waste form confirmed scale-up feasibility. Use of this system at Rocky Flats Plant can result in over 70% fewer drums processed and shipped for disposal, compared with optimal cement formulations. Based on the current Rocky Flats production of nitrate salt per year, polyethylene encapsulation can yield an estimated annual savings between $1.5 million and $2.7 million, compared with conventional hydraulic cement systems. 72 refs., 23 figs., 16 tabs.

  16. MORPHOLOGY AND PROPERTIES OF LINEAR LOW-DENSITY POLYETHYLENE HIGHLY LOADED WITH ALUMINUM HYDROXIDE

    Institute of Scientific and Technical Information of China (English)

    Gen-lin Wang; Ping-kai Jiang; Zi-kang Zhu; Jie Yin

    2002-01-01

    An experimental study was carried out to investigate the effects of isopropoxy tri(dioctyl pyrophosphoryl) titanate coupling agent on the mechanical performance, rheological property and microstructures of polyethylene highly loaded with aluminum hydroxide (Al(OH)a) composite. It was found that the addition of coupling agent results in reduced tensile strength and increased percentage elongation of the filled systems. Silane crosslinkable polyethylene substituting for polyethylene as matrix improves the tensile strength of the composite, while the percentage elongation of the composite still remains at a desired level. Melt viscosity of the composite will be improved by addition of titanate coupling agent. Microstructures of the composites were also studied by means of the scanning electron microscopy (SEM) technique. SEM micrographs reveal that finer dispersion of Al(OH)3 will be obtained upon treatment of titanate and a transition from brittle to tough fracture takes place before and after silane crosslinking structure is introduced into polyethylene highly filled with Al(OH)3 composite.

  17. The Depolymerization of Poly(Ethylene Terephthalate) (PET) Using N-Heterocyclic Carbenes from Ionic Liquids

    Science.gov (United States)

    Kamber, Nahrain E.; Tsujii, Yasuhito; Keets, Kate; Waymouth, Robert M.; Pratt, Russell C.; Nyce, Gregory W.; Hedrick, James L.

    2010-01-01

    The depolymerization of the plastic polyethylene terephthalate (PET or PETE) is described in this laboratory procedure. The transesterification reaction used to depolymerize PET employs a highly efficient N-heterocyclic carbene catalyst derived from a commercially available imidazolium ionic liquid. N-heterocyclic carbenes are potent nucleophilic…

  18. Radiation induced functionalism of polyethylene and ground tire rubber for their reactive compatibility in thermoplastic elastomers

    Energy Technology Data Exchange (ETDEWEB)

    Fainleib, A.; Grigoryeva, O. [Institute of Macromolecular Chemistry, National Academy of Sciences of Ukraine, Kiev 02160 (Ukraine); Martinez B, G. [Laboratorio de Investigacion y Desarrollo de Materiales Avanzados, Facultad de Quimica, Universidad Autonoma del Estado de Mexico, Km. 12 Carretera Toluca-Atlacomulco, San Cayetano 50200, Estado de Mexico (Mexico)], e-mail: fainleib@i.kiev.ua

    2009-07-01

    Reactive compatibility of recycled low-or high-density polyethylenes (LDPE and HDPE, respectively) and ground tire rubber (GTR) via chemical interactions of pre-functionalized components in their blend interface has been carried out. Polyethylene component was functionalized with maleic anhydride (MAH) as well as the rubber component was modified via functionalism with MAH or acrylamide using chemically or irradiation ({gamma} rays) induced grafting techniques. Additional coupling agents such as-p-phenylene diamine (PDA) and polyamide fiber (PAF, from fiber wastes) were used for some thermoplastic elastomer (TPE) producing. The grafting degree and molecular mass distribution of the chromatography analyses, respectively. TPE materials based on synthesized reactive polyethylenes and GTR as well as ethylene-propylene-diene monomer rubber were prepared by dynamic vulcanization of the rubber phase inside thermoplastic (polyethylene) matrix and their phase structure, and main properties have been studied using DSC, TGA, DMTA and mechanical testing. As a final result, the high performance TPE with improved mechanical properties has been developed. (Author)

  19. Formation and Distribution of Space-Charge in Cross-Linked Polyethylene

    Science.gov (United States)

    Zhang, Ye-Wen; Li, Ji-Xiao; Zheng, Fei-Hu; Peng, Zong-Ren; Wu, Chang-Shun; Xia, Zhong-Fu

    2002-08-01

    The formation and distribution of space-charge in a cross-linked polyethylene (XLPE) sample are investigated by means of pressure wave propagation, infrared spectroscopy and electrostatic force microscopy (EFM). The related mechanism of space-charge distribution and the structure of XLPE are discussed. The EFM images show that quite large quantitative space-charges locate at the surface of spherulites.

  20. Rheological behaviour of polyethylene with peroxide crosslinking agent. Ismaeil Ghasemi, Peter Szabo and Henrik Koblitz Rasmussen

    DEFF Research Database (Denmark)

    Rasmussen, Henrik K.; Ghasemi, Ismaeil; Szabo, Peter

    2003-01-01

    due to a peroxide cross-linking reaction of low-density polyethylene (LDPE) was tracked by a combination of creep tests and differential scanning calorimetry (DSC) tests in isothermal conditions. The peroxide was di-cumyl peroxide and its concentration was 2 wt%. The experiments were carried out...

  1. Mechanical properties of high density polyethylene--pennycress press cake composites

    Science.gov (United States)

    Pennycress press cake (PPC) is evaluated as a bio-based fiber reinforcement. PPC is a by-product of crop seed oil extraction. Composites with a high density polyethylene (HDPE) matrix are created by twin screw compounding of 25% by weight of PPC and either 0% or 5% by weight of maleated polyethyle...

  2. Modeling of branching density and branching distribution in low-density polyethylene polymerization

    NARCIS (Netherlands)

    Kim, D.M.; Iedema, P.D.

    2008-01-01

    Low-density polyethylene (ldPE) is a general purpose polymer with various applications. By this reason, many publications can be found on the ldPE polymerization modeling. However, scission reaction and branching distribution are only recently considered in the modeling studies due to difficulties i

  3. High-speed gel-spinning of ultra-high molecular weight polyethylene

    NARCIS (Netherlands)

    Pennings, A.J.; Hooft, R.J. van der; Postema, A.R.; Hoogsteen, W.; Brinke, G. ten

    1986-01-01

    This communication is concerned with the gel-spinning of ultrahigh molecular weight polyethylene (UHMWPE) at speeds up to 1500 m/min. It was found that 5 wt% solutions of UHMWPE in paraffin oil could be extruded through a conical die at a rate of 100 m/min. without the appearance of filament irregul

  4. Wear behaviour of discontinuous aramid fibre reinforced ultra-high molecular weight polyethylene

    NARCIS (Netherlands)

    Hofste, JM; Smit, HHG; Pennings, AJ

    1996-01-01

    The wear of Ultra-High Molecular Weight Polyethylene has generated new concern regarding the long-term clinical performance of total joint replacements. To extend the lifetime of artificial joints, it is necessary to decrease tt-le wear rate of UHMWPE. One possible solution is the incorporation of a

  5. Short aramid-fiber reinforced ultra-high molecular weight polyethylene

    NARCIS (Netherlands)

    Hofste, JM; Bergmans, KJR; deBoer, J; Wevers, R; Pennings, AJ

    1996-01-01

    Ultra-High Molecular Weight Polyethylene (UHMWPE) is frequently used in artificial joints because of its high wear resistance. To extend the lifetime of these joints even further, it is necessary to decrease the wear rate. The wear rate may be decreased by blending UHMWPE with short aramid fibers. O

  6. Surface properties of poly(ethylene oxide)-based segmented block copolymers with monodisperse hard segments

    NARCIS (Netherlands)

    Husken, D.; Feijen, Jan; Gaymans, R.J.

    2009-01-01

    The surface properties of segmented block copolymers based on poly(ethylene oxide) (PEO) segments and monodisperse crystallizable tetra-amide segments were studied. The monodisperse crystallizable segments (T6T6T) were based on terephthalate (T) and hexamethylenediamine (6). Due to the crystallinity

  7. Comment on "A bacterium that degrades and assimilates poly(ethylene terephthalate)".

    Science.gov (United States)

    Yang, Yu; Yang, Jun; Jiang, Lei

    2016-08-19

    Yoshida et al (Report, 11 March 2016, p. 1196) reported that the bacterium Ideonella sakaiensis 201-F6 can degrade and assimilate poly(ethylene terephthalate) (PET). However, the authors exaggerated degradation efficiency using a low-crystallinity PET and presented no straightforward experiments to verify depolymerization and assimilation of PET. Thus, the authors' conclusions are rather misleading.

  8. Introduction of functional groups of polyethylene surfaces by a carbon dioxide plasma treatment

    NARCIS (Netherlands)

    Terlingen, J.G.A.; Terlingen, Johannes G.A.; Gerritsen, Hermina F.C.; Gerritsen, H.F.C.; Hoffman, Allan S.; Feijen, Jan

    1995-01-01

    Poly(ethylene) (PE) films were treated with a carbon dioxide (CO2) plasma to study the formation of oxygen-containing functional groups at the surface. Modified and nonmodified films were characterized by X-ray photoelectron spectroscopy (XPS) and water contact angle measurements. During the CO2

  9. 77 FR 25684 - Polyethylene Retail Carrier Bags From Thailand: Rescission of Antidumping Duty Administrative Review

    Science.gov (United States)

    2012-05-01

    ... International Trade Administration Polyethylene Retail Carrier Bags From Thailand: Rescission of Antidumping... retail carrier bags from Thailand. The period of review is August 1, 2010, through July 31, 2011. As a... retail carrier bags from Thailand. See Initiation of Antidumping and Countervailing Duty...

  10. The microenvironment within and pollen transmission through paper and polyethylene sorghum pollination bags

    Science.gov (United States)

    Bird damage is a problem in sorghum breeding and germplasm maintenance operations. Paper pollination bags are damaged by rain and provide minimal deterrent to birds. Earlier we reported upon bird resistance of spun polyethylene pollination bags. Herein, we report the potential for pollen transmissio...

  11. Anionic polymerization and polyhomologation: An ideal combination to synthesize polyethylene-based block copolymers

    KAUST Repository

    Zhang, H.

    2013-08-07

    A novel one-pot methodology combining anionic polymerization and polyhomologation, through a "bridge" molecule (BF3OEt 2), was developed for the synthesis of polyethylene (PE)-based block copolymers. The anionically synthesized macroanion reacts with the "bridge" molecule to afford a 3-arm star (trimacromolecular borane) which serves as an initiator for the polyhomologation. 2013 The Royal Society of Chemistry.

  12. Thermal Analysis, Mechanical and Rheological Behaviour of Melt Manufactured Polyethylene/Liquid Crystal Polymer Blends

    Directory of Open Access Journals (Sweden)

    Ilze ELKSNITE

    2011-07-01

    Full Text Available Modification of properties of conventional thermoplastics with thermotropic liquid crystal polymers, from one hand, allows decrease their viscosities, substantially facilitating processing conditions, and, from another hand, allows increase their exploitation properties. Orientation of the labile structure of liquid crystal polymer in extrusion or injection moulding causes specific reinforcement (so-called self-reinforcement to occur in the blends containing liquid crystal polymer. Up to now the effect of self-reinforcement is mostly investigated in the blends, containing considerable amount of liquid crystal polymer. In this research the effect of minor amounts of liquid crystalline co-polyester modifier on the properties of polyethylene is investigated. Various compositions of laboratory synthesized hydroxybenzoic acid /polyethylene terephtalate copolymer containing polyethylene composites have been manufactured by thermoplastic blending. It has been observed that 1 modulus of elasticity, yield strength and ultimate strength increase with raising the content of liquid crystalline modifier; 2 void content in the investigated polyethylene/liquid crystal copolymer composites is not greater that 1 %; 3 addition of liquid crystalline co-polyester modifier improves arrangement of PE crystalline phase.http://dx.doi.org/10.5755/j01.ms.17.2.483

  13. Laxative Treatment With Polyethylene Glycol Does Not Affect Lipid Absorption in Rats

    NARCIS (Netherlands)

    van der Wulp, Mariette Y. M.; Cuperus, Frans J. C.; Stellaard, Frans; van Dijk, Theo H.; Dekker, Jan; Rings, Edmond H. H. M.; Groen, Albert K.; Verkade, Henkjan J.

    2012-01-01

    Objectives: Polyethylene glycol (PEG) is a frequently used laxative agent. It is unknown, however, whether PEG affects the absorptive capacity of the intestine. Reduced lipid (dietary fat and cholesterol) absorption induced by long-term PEG treatment could negatively affect growth in children. We te

  14. CT dose equilibration and energy absorption in polyethylene cylinders with diameters from 6 to 55 cm

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xinhua; Zhang, Da; Liu, Bob, E-mail: bliu7@mgh.harvard.edu [Division of Diagnostic Imaging Physics and Webster Center for Advanced Research and Education in Radiation, Department of Radiology, Massachusetts General Hospital, Boston, Massachusetts 02114 (United States)

    2015-06-15

    Purpose: ICRU Report No. 87 Committee and AAPM Task Group 200 designed a three-sectional polyethylene phantom of 30 cm in diameter and 60 cm in length for evaluating the midpoint dose D{sub L}(0) and its rise-to-the-equilibrium curve H(L) = D{sub L}(0)/D{sub eq} from computed tomography (CT) scanning, where D{sub eq} is the equilibrium dose. To aid the use of the phantom in radiation dose assessment and to gain an understanding of dose equilibration and energy absorption in polyethylene, the authors evaluated the short (20 cm) to long (60 cm) phantom dose ratio with a polyethylene diameter of 30 cm, assessed H(L) in polyethylene cylinders of 6–55 cm in diameters, and examined energy absorption in these cylinders. Methods: A GEANT4-based Monte Carlo program was used to simulate the single axial scans of polyethylene cylinders (diameters 6–55 cm and length 90 cm, as well as diameter 30 cm and lengths 20 and 60 cm) on a clinical CT scanner (Somatom Definition dual source CT, Siemens Healthcare). Axial dose distributions were computed on the phantom central and peripheral axes. An average dose over the central 23 or 100 mm region was evaluated for modeling dose measurement using a 0.6 cm{sup 3} thimble chamber or a 10 cm long pencil ion chamber, respectively. The short (20 cm) to long (90 cm) phantom dose ratios were calculated for the 30 cm diameter polyethylene phantoms scanned at four tube voltages (80–140 kV) and a range of beam apertures (1–25 cm). H(L) was evaluated using the dose integrals computed with the 90 cm long phantoms. The resultant H(L) data were subsequently used to compute the fraction of the total energy absorbed inside or outside the scan range (E{sub in}/E or E{sub out}/E) on the phantom central and peripheral axes, where E = LD{sub eq} was the total energy absorbed along the z axis. Results: The midpoint dose in the 60 cm long polyethylene phantom was equal to that in the 90 cm long polyethylene phantom. The short-to-long phantom dose

  15. Characteristics of highly cross-linked polyethylene wear debris in vivo.

    Science.gov (United States)

    Baxter, Ryan M; MacDonald, Daniel W; Kurtz, Steven M; Steinbeck, Marla J

    2013-04-01

    Despite the widespread implementation of highly cross-linked polyethylene (HXLPE) liners to reduce the clinical incidence of osteolysis, it is not known if the improved wear resistance will outweigh the inflammatory potential of HXLPE wear debris generated in vivo. Thus, we asked: What are the differences in size, shape, number, and biological activity of polyethylene wear particles obtained from primary total hip arthroplasty revision surgery of conventional polyethylene (CPE) versus remelted or annealed HXLPE liners? Pseudocapsular tissue samples were collected from revision surgery of CPE and HXLPE (annealed and remelted) liners, and digested using nitric acid. The isolated polyethylene wear particles were evaluated using scanning electron microscopy. Tissues from both HXLPE cohorts contained an increased percentage of submicron particles compared to the CPE cohort. However, the total number of particles was lower for both HXLPE cohorts, as a result there was no significant difference in the volume fraction distribution and specific biological activity (SBA; the relative biological activity per unit volume) between cohorts. In contrast, based on the decreased size and number of HXLPE wear debris there was a significant decrease in total particle volume (mm(3)/g of tissue). Accordingly, when the SBA was normalized by total particle volume (mm(3)/gm tissue) or by component wear volume rate (mm(3)/year), functional biological activity of the HXLPE wear debris was significantly decreased compared to the CPE cohort. Indications for this study are that the osteolytic potential of wear debris generated by HXLPE liners in vivo is significantly reduced by improvements in polyethylene wear resistance. Copyright © 2013 Wiley Periodicals, Inc.

  16. Characteristics of highly cross-linked polyethylene wear debris in vivo

    Science.gov (United States)

    Baxter, Ryan M.; MacDonald, Daniel W.; Kurtz, Steven M.; Steinbeck, Marla J.

    2014-01-01

    Despite the widespread implementation of highly cross-linked polyethylene (HXLPE) liners to reduce the clinical incidence of osteolysis, it is not known if the improved wear resistance will outweigh the inflammatory potential of HXLPE wear debris generated in vivo. Thus, we asked: What are the differences in size, shape, number, and biological activity of polyethylene wear particles obtained from primary total hip arthroplasty revision surgery of conventional polyethylene (CPE) versus remelted or annealed HXLPE liners? Pseudocapsular tissue samples were collected from revision surgery of CPE and HXLPE (annealed and remelted) liners, and digested using nitric acid. The isolated polyethylene wear particles were evaluated using scanning electron microscopy. Tissues from both HXLPE cohorts contained an increased percentage of submicron particles compared to the CPE cohort. However, the total number of particles was lower for both HXLPE cohorts, as a result there was no significant difference in the volume fraction distribution and specific biological activity (SBA; the relative biological activity per unit volume) between cohorts. In contrast, based on the decreased size and number of HXLPE wear debris there was a significant decrease in total particle volume (mm3/g of tissue). Accordingly, when the SBA was normalized by total particle volume (mm3/gm tissue) or by component wear volume rate (mm3/year), functional biological activity of the HXLPE wear debris was significantly decreased compared to the CPE cohort. Indications for this study are that the osteolytic potential of wear debris generated by HXLPE liners in vivo is significantly reduced by improvements in polyethylene wear resistance. PMID:23436587

  17. Adhesion and biocides inactivation of Salmonella on stainless steel and polyethylene

    Directory of Open Access Journals (Sweden)

    Eduardo Cesar Tondo

    2010-12-01

    Full Text Available The adhesion of Salmonella (S. strains to stainless steel and polyethylene and their inactivation by biocides used in food industry was investigated. Coupons of stainless steel and polyethylene were immersed in bacterial suspensions of S. Enteritidis, S. Typhimurium, and S. Bredeney during 15, 30, and 60 minutes, and submitted to different concentrations of peracetic acid (PAA, sodium hypochlorite (NaOCl, and quaternary ammonium (Quat sanitizers. Hydrophobicity of the surfaces was evaluated by contact angle measurements using the sessile drop method and bacterial adhesion was accompanied through bacterial counts and scanning electron microscopy (SEM. Results indicated that the three serovars of Salmonella presented similar adhesion to both materials (5.0 to 6.5 log cfu cm-2. The time of exposure did not influence the counts of adhered cells on both surfaces, however SEM revealed larger clusters of S. Enteritidis on both materials, not found for the other serovars. S. Enteritidis presented lower sessile drop angle on polyethylene, indicating hydrophilic properties of this material. The biocides were not able to inactivate all the microorganisms adhered on both surfaces. At least 1 log cfu cm-2 of all serovars tested remained viable after the exposure to different biocide concentrations. In general, higher counts of survivors were observed on polyethylene disinfected with different concentrations of biocides. S. Bredeney e S. Typhimurium were more resistant than S. Enteritidis to PAA, whilst S. Enteritidis presented smaller reduction rates to NaOCl. This last biocide was able to reduce Salmonella counts in approximately 3.0 to 4.0 log cm-2. When adhered to polyethylene, the serovars S. Typhimurium and S. Enteritidis were more resistant to Quat than S. Bredeney in all concentrations tested, and the numbers of S. Enteritidis remained almost unaltered. On stainless steel disinfected by Quat, S. Bredeney presented higher numbers of survivors.

  18. Does cyclic stress and accelerated ageing influence the wear behavior of highly crosslinked polyethylene?

    Science.gov (United States)

    Affatato, Saverio; De Mattia, Jonathan Salvatore; Bracco, Pierangiola; Pavoni, Eleonora; Taddei, Paola

    2016-06-01

    First-generation (irradiated and remelted or annealed) and second-generation (irradiated and vitamin E blended or doped) highly crosslinked polyethylenes were introduced in the last decade to solve the problems of wear and osteolysis. In this study, the influence of the Vitamin-E addition on crosslinked polyethylene (XLPE_VE) was evaluated by comparing the in vitro wear behavior of crosslinked polyethylene (XLPE) versus Vitamin-E blended polyethylene XLPE and conventional ultra-high molecular weight polyethylene (STD_PE) acetabular cups, after accelerated ageing according to ASTM F2003-02 (70.0±0.1°C, pure oxygen at 5bar for 14 days). The test was performed using a hip joint simulator run for two millions cycles, under bovine calf serum as lubricant. Mass loss was found to decrease along the series XLPE_VE>STD_PE>XLPE, although no statistically significant differences were found between the mass losses of the three sets of cups. Micro-Raman spectroscopy was used to investigate at a molecular level the morphology changes induced by wear. The spectroscopic analyses showed that the accelerated ageing determined different wear mechanisms and molecular rearrangements during testing with regards to the changes in both the chain orientation and the distribution of the all-trans sequences within the orthorhombic, amorphous and third phases. The results of the present study showed that the addition of vitamin E was not effective to improve the gravimetric wear of PE after accelerated ageing. However, from a molecular point of view, the XLPE_VE acetabular cups tested after accelerated ageing appeared definitely less damaged than the STD_PE ones and comparable to XLPE samples.

  19. Enhanced adherence of mouse fibroblast and vascular cells to plasma modified polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Reznickova, Alena, E-mail: alena.reznickova@vscht.cz [Department of Solid State Engineering, Institute of Chemical Technology Prague, 166 28 Prague 6 (Czech Republic); Novotna, Zdenka, E-mail: zdenka1.novotna@vscht.cz [Department of Solid State Engineering, Institute of Chemical Technology Prague, 166 28 Prague 6 (Czech Republic); Kolska, Zdenka [Faculty of Science, J.E. Purkyně University, 400 96 Usti nad Labem (Czech Republic); Kasalkova, Nikola Slepickova [Department of Solid State Engineering, Institute of Chemical Technology Prague, 166 28 Prague 6 (Czech Republic); Rimpelova, Silvie [Department of Biochemistry and Microbiology, Institute of Chemical Technology Prague, 166 28 Prague 6 (Czech Republic); Svorcik, Vaclav [Department of Solid State Engineering, Institute of Chemical Technology Prague, 166 28 Prague 6 (Czech Republic)

    2015-07-01

    Since the last decade, tissue engineering has shown a sensational promise in providing more viable alternatives to surgical procedures for harvested tissues, implants and prostheses. Biomedical polymers, such as low-density polyethylene (LDPE), high-density polyethylene (HDPE) and ultra-high molecular weight polyethylene (UHMWPE), were activated by Ar plasma discharge. Degradation of polymer chains was examined by determination of the thickness of ablated layer. The amount of an ablated polymer layer was measured by gravimetry. Contact angle, measured by goniometry, was studied as a function of plasma exposure and post-exposure aging times. Chemical structure of modified polymers was characterized by angle resolved X-ray photoelectron spectroscopy. Surface chemistry and polarity of the samples were investigated by electrokinetic analysis. Changes in surface morphology were followed using atomic force microscopy. Cytocompatibility of plasma activated polyethylene foils was studied using two distinct model cell lines; VSMCs (vascular smooth muscle cells) as a model for vascular graft testing and connective tissue cells L929 (mouse fibroblasts) approved for standardized material cytotoxicity testing. Specifically, the cell number, morphology, and metabolic activity of the adhered and proliferated cells on the polyethylene matrices were studied in vitro. It was found that the plasma treatment caused ablation of the polymers, resulting in dramatic changes in their surface morphology and roughness. ARXPS and electrokinetic measurements revealed oxidation of the polymer surface. It was found that plasma activation has a positive effect on the adhesion and proliferation of VSMCs and L929 cells. - Highlights: • Plasma activation of LDPE, HDPE and UHMWPE • Study of surface properties by several techniques: ARXPS, AFM, zeta-potential, and goniometry • Investigation of adhesion and spreading of vascular smooth muscle cells (VSMCs) and mouse fibroblasts (L929)

  20. Purification of papain by metal affinity partitioning in aqueous two-phase polyethylene glycol/sodium sulfate systems.

    Science.gov (United States)

    Jiang, Zhi-Guo; Zhang, Hai-De; Wang, Wei-Tao

    2015-05-01

    A simple and inexpensive aqueous two-phase affinity partitioning system using metal ligands was introduced to improve the selectivity of commercial papain extraction. Polyethylene glycol 4000 was first activated using epichlorohydrin, then it was covalently linked to iminodiacetic acid. Finally, the specific metal ligand Cu(2+) was attached to the polyethylene glycol-iminodiacetic acid. The chelated Cu(2+) content was measured by atomic absorption spectrometry as 0.88 mol/mol (polyethylene glycol). The effects on the purification at different conditions, including polyethylene glycol molecular weight (2000, 4000, and 6000), concentration of phase-forming components (polyethylene glycol 12-20% w/w and sodium sulfate 12-20%, w/w), metal ligand type, and concentration, system pH and the commercial papain loading on papain extraction, were systematically studied. Under optimum conditions of the system, i.e. 18% w/w sodium sulfate, 18% w/w polyethylene glycol 4000, 1% w/w polyethylene glycol-iminodiacetic acid-Cu(2+) and pH 7, a maximum yield of 90.3% and a degree of purification of 3.6-fold were obtained. Compared to aqueous two phase extraction without ligands, affinity partitioning was found to be an effective technique for the purification of commercial papain with higher extraction efficiency and degree of purification.