WorldWideScience

Sample records for monomer chloride adduct

  1. 46 CFR 151.50-34 - Vinyl chloride (vinyl chloride monomer).

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vinyl chloride (vinyl chloride monomer). 151.50-34... chloride (vinyl chloride monomer). (a) Copper, aluminum, magnesium, mercury, silver, and their alloys shall... equipment that may come in contact with vinyl chloride liquid or vapor. (b) Valves, flanges, and...

  2. A new approach to the synthesis of monomers and polymers incorporating furan/maleimide Diels-Alder adducts

    Science.gov (United States)

    Banella, Maria Barbara; Gioia, Claudio; Vannini, Micaela; Colonna, Martino; Celli, Annamaria; Gandini, Alessandro

    2016-05-01

    The Diels-Alder reaction between furan and maleimide moieties is a well-known and widely used strategy to build bio-based macromolecular structures with peculiar properties. The furan-maleimide adducts are thermally reversible because they can be broken above about 120°C and recombined at lower temperatures. At the moment only the monomers exhibiting the furan or the maleimide moieties on their extremity are used in order to get linear or cross-linked polymeric structures. The innovative idea described here consists in using a monomer bearing two carboxylic acidic groups on its extremities and a furan-maleimide Diels-Alder adduct within its structure. This monomer can give rise to classical polycondensation reactions leading to polymers. These polymers (which are polyesters in the present case) can be broken at high temperatures in correspondence of the furane-maleimide Diels-Alder adduct leading to segments exhibiting furan or maleimide moieties at their extremities, which at lower temperature recombine leading to random or block copolymers.

  3. [Evaluation of professional exposure to chloride vinyl monomer and vinyl idene chloride for a pharmaceutical packaging worker].

    Science.gov (United States)

    Dorsi, F; De Grandis, D; Laurelli, R; Narda, R; Pietrantonio, E; Scarlini, E; Soldati, P S

    2007-01-01

    The study was conducted by Judicial Policy investigations of Prosecution's Office. The event was connected by a professional founded suspicion disease of a pharmaceutical worker. First information coming from the Authority indicated a chloride vinyl monomer (CVM) exposure. We applied a chemical risk assessment method to estimate real professional exposure. The method was based on the productive cycle, physical and chemical and toxicological properties. The method combined to environmental data permitted to formulate etiological hypothesis. The worker during drugs packaging was exposed to CVM and vinylidene chloride (CVDM) caused by blister warming and by glue deposition. We explain the evaluations by which we could consider the pollutant different distribution in workplaces.

  4. A cleaner two-step synthesis of high purity diallyldimethylammonium chloride monomers for flocculant preparation

    Institute of Scientific and Technical Information of China (English)

    TIAN Bing-hui; FAN Bin; PENG Xian-jia; LUAN Zhao-kun

    2005-01-01

    In order to improve the flocculation efficiency of polydiallyldimethylammonium chloride (PDADMAC), high molecular weight PDADMAC should be prepared from high purity diallyldimethylammonium chloride(DADMAC) monomers. In this paper, a cleaner method with microwave irradiation and alkali solidification was proposed for preparing high pure DADMAC by selective heating under low temperature, and the prepared high purity DADMAC is characterized using FTIR and atomic absorption spectrometry. The new method provides a solution to the key technical problem of PDADMAC synthesis. Comparing with the conventional methods, the results showed that the advantages of the novel synthesis include: (a) high purity DADMAC is improved from 57% to 71%; (b) reaction time of tertiary amine preparation is shortened from 6 h to 7 min; (c) water instead of acetone was used as reaction medium; (d) toxic by-products,wastewater and waste gas are eliminated. Flocculant made from the synthesized high purity DADMAC monomers was proved more efficient in flocculation tests.

  5. Unexpected synthesis of cinnamaldehyde-dimedone adduct using samarium (III) chloride

    Science.gov (United States)

    Cahyana, A. H.; Nadila, A.; Ardiansah, B.

    2017-07-01

    In the present work, 1,8-dioxooctahydroxanthene cannot be obtained from the reaction between cinnamaldehyde and dimedone (ratio 1:2) using samarium(III) chloride as a Lewis acid catalyst. The unexpected product formed is 5,5-dimethyl-2-(3-phenylallylidene)cyclohexane-1,3-dione as a result of 1:1 adduct. The product is obtained in a low to good yield and the optimum protocol can be achieved by running the reaction using 10% mol SmCl3 in water at room temperature for 2 h. This product is preliminary screened for its radical scavenging test with moderate activity.

  6. A comprehensive analysis of plausible genotoxic covariates among workers of a polyvinyl chloride plant exposed to vinyl chloride monomer.

    Science.gov (United States)

    Kumar, Alagamuthu Karthick; Balachandar, Vellingiri; Arun, Meyyazhagan; Ahamed, Shafi Ahammed Khan Mustaq; Kumar, Shanmugam Suresh; Balamuralikrishnan, Balasubramanium; Sankar, Kathannan; Sasikala, Keshavarao

    2013-05-01

    The aim of this study was to assess the frequency of chromosomal aberrations-including chromatid type aberrations (CTAs), chromosomal type aberrations, micronucleus (MN) comet assay, and XRCC1 399 Arg/Gln polymorphism-in peripheral blood lymphocytes of workers occupationally exposed to vinyl chloride monomer (VCM). A total of 52 workers and an equal number of controls were recruited into the study to explore the potential cytogenetic risk of occupational exposure to VCM. Questionnaires were administered to obtain details of habitual cigarette-smoking, alcohol-consumption pattern, and occupation, etc. The exposed subjects and controls were classified into two groups based on age (group I 8 and ≥8 years). CTA, MN, and comet assay frequency were significantly greater in polyvinyl chloride (PVC) factory workers (p < 0.05) with long-duration work. CTA, MN, and comet assay values were found to be increased with age in exposed subjects as well as in controls, with exposed subjects showing a statistically greater degree. An extensively greater MN frequency was observed in smokers exposed to VCM than in the control group (P < 0.05). The mean tail length of exposed subjects was greater compared with controls. The study on XRCC1 399 Arg/gln polymorphism in PVC factory workers showed less significant difference in allele frequency compared with controls. In conclusion, this results of work provides evidence for an apparent genotoxic effect associated with VCM exposure. Our results reinforce the greater sensitivity of cytogenetic assays for biomonitoring of occupationally exposed populations. Statistics indicate that workers exposed to VCM are at carcinogenic risk and should be monitored for long-term adverse effects from their exposure.

  7. Quantitative Analysis of Volatile Impurities in Diallyldimethylammonium Chloride Monomer Solution by Gas Chromatography Coupled with Liquid-Liquid Extraction

    Directory of Open Access Journals (Sweden)

    Cheng Liu

    2017-01-01

    Full Text Available The quantitative analysis method for volatile impurities in diallyldimethylammonium chloride (DADMAC monomer solution was established in this paper. The volatile impurities were quantitatively analyzed with trichloromethane as extraction solvent and n-hexane as internal standard by using gas chromatography (GC coupled with solvent extraction, and the chromatographic conditions, quantitative methods, and extraction conditions were systematically investigated in detail. The results showed that excellent linear relationships of 5 volatile impurities (dimethylamine, allyldimethylamine, allyl chloride, allyl alcohol, and allyl aldehyde were obtained in the range of 1–100 mg·L−1. The method also showed good specificity, recovery (95.0%–107.5%, and relative standard deviation (RSD, 1.40%–7.67%. This method could accurately detect the whole volatile impurities in DADMAC monomer solution quantitatively in one time with a low detection limit. Furthermore, this method is conducive to the preparation of highly pure DADMAC monomer and the development of national and international standards of the DADMAC monomer product quality, and the results could provide a strong foundation for the regulation and mechanism research of impurities on monomer reactivity in polymerization.

  8. Exploring a new method for the biological monitoring of plastic workers exposed to the vinyl chloride monomer.

    Science.gov (United States)

    Azari, Mansour Rezazadeh; Tayefeh-Rahimian, Raana; Jafari, Mohamad Javad; Souri, Hamid; Shokoohi, Yasser; Tavakol, Alaheh; Yazdanbakhsh, Zahra

    2016-12-01

    Vinyl chloride monomer (VCM) is widely used in the production of polyvinyl chloride (PVC) plastics. VCM is recognized as a confirmed human and animal carcinogenic compound. Recent studies have reported poor health of plastic workers, even having exposure at concentrations below the permissible limit to VCM. There has not been any study regarding exposed workers to VCM in Iran. Similarly, no information exists as to the biological monitoring of such workers. The main purpose of this study was to conduct a thorough occupational and biological monitoring of Iranian plastic workers exposed to VCM.A total of 100 workers from two plastic manufacturing plants (A and B) in Tehran along with 25 unexposed workers as controls were studied. The personal monitoring of all nonsmoking workers exposed to VCM at two plastic manufacturing plants (A and B) was performed in the morning shift (8 a.m. to 4 p.m.) according to the National Institute For Occupational Safety And Health method no. 1007.Biological monitoring of workers was carried out through collection of exhaled breath of all exposed and control workers in Tedlar bags and with a subsequent analysis using gas chromatography-flame ionization detector.Not only the mean occupational exposure of workers to VCM at plant A was higher than the respective threshold limit value but also the statistical significance was higher than workers at plant B. Similarly, VCM concentration in exhaled breath of workers at plant A was also statistically significantly higher than at plant B. Correlation of occupational exposure of all workers to vinyl chloride with its concentration in exhaled breath was statistically significant.This is the first study on biological monitoring for exposed plastic workers to VCM using exhaled breath. On the basis of the results in this study, a novel method of biological monitoring of plastic workers was proposed.

  9. Research progress on deep application of vinyl chloride monomer%氯乙烯单体深加工应用的研究现状

    Institute of Scientific and Technical Information of China (English)

    李红海; 李婧; 吴天祥

    2011-01-01

    概述了国内外氯乙烯单体深加工的研究现状,简述了工业上氯乙烯单体生产聚氯乙烯、共聚物、聚偏二氯乙烯、氯化聚氯乙烯、1,1,1,3,3-五氟丙烷和氯乙醛等深加工途径以及产品的应用前景。%Research progress in the deep proccssing of vinyl chloridc monomer at homc and abroad was summarized. The dcrivativcs of vinyl chloride monomer and their application prospccts wcrc also introduced, such as potyvinyl chloride(PVC), copolymcr, polyvinylidcnc chloride, chlorinated polyvinyl chloride, 1,1,1,3,3- pcntafluoropropanc and chloroacetaldchydc.

  10. Evaluation in vinyl chloride monomer-exposed workers and the relationship between liver lesions and gene polymorphisms of metabolic enzymes

    Institute of Scientific and Technical Information of China (English)

    Shou-Min Zhu; Xue-Feng Pen; Jun-Xiang Wan; Zhao-Lin Xia

    2005-01-01

    AIM: To analyze occupational health hazards exposure to doses lower than the Chinese occupational health standard in a selected VC polymerization plant in China,and also to elucidate the relationship between genetic polymorphisms and genetic susceptibility on liver lesions of workers exposed to vinyl chloride monomer (VCM).METHODS: In order to explore the mechanism of VCM-related health effects, we used a case-control design to investigate the association between the genetic polymorphisms of metabolic enzymes and liver lesions in workers occupationally exposed to VCM. Genotypes of CYP2E1, GSTT1, GSTM1, ALDH2 and ADH2 were identified using PCR and PCR-RFLP.RESULTS: Even when the concentration of VCM was lower than the current Chinese occupational health standard,neurasthenia, pharyngeal irritation, liver ultrasonography abnormalities and hemoglobin disorders were significantly higher in exposure subjects compared to non-exposure subjects, and the relative risks (RR and 95% CI) were 1.74 (1.06-2.85), 1.97 (1.56-2.48), 10.69 (4.38-26.12),and 2.07 (1.20-3.57). CYP2E1 c1c2/c2c2 genotype was significantly associated with liver damages (OR 3.29, 95% CI 1.51-7.20, P<0.01).CONCLUSION: The incidences of neurasthenia and liver ultrasonography abnormalities significantly increase when the cumulative exposure dose increases. The genotypes of metabolic enzymes (CYP2E1 c1c2/c2c2, null GSTT1 and ADH2 1-1) play important roles in VCM metabolism.Polymorphisms of CYP 2E1, GSTT1 and ADH2 may be a major reason of genetic susceptibility in VCM-induced hepatic damage.

  11. The cytotoxicity of methacryloxylethyl cetyl ammonium chloride, a cationic antibacterial monomer, is related to oxidative stress and the intrinsic mitochondrial apoptotic pathway.

    Science.gov (United States)

    Ma, Sai; Shan, Le-qun; Xiao, Yu-hong; Li, Fang; Huang, Li; Shen, Lijuan; Chen, Ji-hua

    2011-11-01

    Antibacterial monomers incorporated in dentin bonding systems may have toxic effects on the pulp. Thus, the cytotoxicity of antibacterial monomers and its underlying mechanisms must be elucidated to improve the safety of antibacterial monomer application. The influence of an antibacterial monomer, methacryloxylethyl cetyl ammonium chloride (DMAE-CB), on the vitality of L929 mouse fibroblasts was tested using MTT assay. Cell cycle progression was studied using flow cytometry. Production of intracellular reactive oxygen species (ROS) after DMAE-CB treatment was measured using 2,7-dichlorodihydrofluorescein diacetate staining and flow cytometry analysis. Loss of mitochondrial membrane potential, disturbance of Bcl-2 and Bax expression, as well as release of cytochrome C were also measured using flow cytometry analysis or Western blot to explore the possible involvement of the mitochondrial-related apoptotic pathway. DMAE-CB elicited cell death in a dose-dependent manner and more than 50% of cells were killed after treatment with 30 µM of the monomer. Both necrosis and apoptosis were observed. DMAE-CB also induced G1- and G2-phase arrest. Increased levels of intracellular ROS were observed after 1 h and this overproduction was further enhanced by 6-h treatment with the monomer. DMAE-CB may cause apoptosis by disturbing the expression of Bcl-2 and Bax, reducing the mitochondrial potential and inducing release of cytochrome C. Taken together, these findings suggest that the toxicity of the antibacterial monomer DMAE-CB is associated with ROS production, mitochondrial dysfunction, cell cycle disturbance, and cell apoptosis/necrosis.

  12. SYNTHESIS AND INFRARED STUDY OF SOME NEW MOLYBDATO AND HYDROGENOMOLYBDATO ADDUCTS AND COMPLEXES OF COBALT, ZINC, ANTIMONY AND CADMIUM CHLORIDES

    Directory of Open Access Journals (Sweden)

    SERIGNE FALLOU POUYE

    2014-01-01

    Full Text Available Five new molybdato (four and hydrogenomolybdato (one adducts and complexes have been synthesized and studied by infrared spectroscopy. The suggested structures are all discrete, the molybdate anion behaving as a trichelating, a monochelating, a bridging, a tetrachelating and a bichelating ligand. The environment around Zn, Co, Cd is tetrahedral or trigonal bipyramidal also for Zn - while being octahedral for Sb. The Cd pentanuclear adduct has a two metallic components structure, a tetranuclear anionic one with a tetrachelating molybdate, the second being a neutral dehydrated adduct component. The suggested structure for the hydrogenomolybdato adduct is discrete, the hydrogenomolybdate being present as a hydrogen bonded dimer behaves as a bridging bidentate ligand. The water molecules can be considered as a coordinating ligand or lattice. When secondary interactions through hydrogen bonds involving the water molecules are considered supramolecular architectures are obtained.

  13. Determination of residual vinyl chloride monomer in artificial leather by GC-MS method%GC-MS法测定人造革残留氯乙烯单体

    Institute of Scientific and Technical Information of China (English)

    刘芳; 魏孟媛; 刘敏华; 周婵

    2012-01-01

    建立了测定聚氯乙烯人造革中的残留氯乙烯的顶空气相色谱-质谱法(GC-MS).采用N,N-二甲基乙酰胺(DMA)溶解聚氯乙烯人造革样品,在70℃下平衡30 min,顶空进样进行气相色谱-质谱分析.结果显示,在0.2~20 μg范围内,该方法线性关系良好,相关系数r=0.999.对样品进行3组不同浓度水平的加标测定(n=6),平均回收率为88%~92%,相对标准偏差(RSD)小于5.5%,检出限为0.2 mg/kg.该方法简便、快速,准确,可用于测定聚氯乙烯人造革中氯乙烯单体含量.%The method for determination of residual vinyl chloride monomer in polyvinyl chloride artificial leather by headspace-gas chromatography-mass spectrometry is established. The polyvinyl chloride artificial leather is dissolved by N, N-dimethylacet-amide( DMA). The sample is injected into the gas chromatography-mass spectrometry(GC-MS) with headspace sampler after equilibrating at 70T for 30 min. The calibration curve of vinyl chloride is linear in the range of 0.2 ~ 20 μg, and the correlation coefficient r is 0.999. The average recoveries of vinyl chloride are in the range of 88% -92% with relative standard deviations (n=6) less than 5.5% in three levels respectively. The detection limit of the method is 0.2 mg/kg. The method is simple, convenient and accurate which is suitable for determining the residual vinyl chloride monomer in polyvinyl chloride artificial leather.

  14. Ternary choline chloride/caffeic acid/ethylene glycol deep eutectic solvent as both a monomer and template in a molecularly imprinted polymer.

    Science.gov (United States)

    Fu, Najing; Liu, Xiao; Li, Liteng; Tang, Baokun; Row, Kyung Ho

    2017-05-01

    A molecularly imprinted polymer based on a ternary deep eutectic solvent comprised of choline chloride/caffeic acid/ethylene glycol was prepared. The caffeic acid in the ternary deep eutectic solvent was used as both a monomer and template. The molecularly imprinted polymer based on the ternary deep eutectic solvent was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, field-emission scanning electron microscopy, Brunauer-Emmett-Teller surface area analysis, atomic force microscopy, and elemental analysis. A series of molecularly imprinted polymers based on choline chloride/caffeic acid/ethylene glycol with different molar ratios was prepared and applied to the molecular recognition of polyphenols. A comparison of the recognition ability of molecularly imprinted polymers to polyphenols revealed that the choline chloride/caffeic acid/ethylene glycol (1:0.4:1, molar ratio) molecularly imprinted polymer had the best molecular recognition effect with 132 μg/g of protocatechuic acid, 104 μg/g of catechins, 80 μg/g of epicatechin, and 123 μg/g of caffeic acid in 6 h, as well as good molecular recognition ability for polyphenols from a Radix Asteris sample. These results show that the ternary deep eutectic solvent based molecularly imprinted polymer is a potential medium that can be applied to drug purification, drug delivery, and drug analysis. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Evaluation of the effect of the concentration of plasticizer di(2-ethylhexyl) phthalate on the quantity of residual monomer vinyl chloride in PVC chest drainage tubes.

    Science.gov (United States)

    Kicheva, Y I; Richter, H; Popova, E

    2004-08-01

    The effect of amount of plasticizer di(2-ethylhexyl) phthalate (DEHP) amount on the amount of residual monomer vinyl chloride (VC) was determined in samples of plasticised polyvinyl chloride (PVC) with different concentration of plasticiser (22.32-33.05%), before and after sterilisation by a titrimetric method. The titrimetric method was used to determine the VC concentration in a KMnO4 solution where the samples were kept immersed under the same conditions for 2 h. The influence of PVC film extracts with different amounts of DEHP on mouse fibroblast cells L-929 in a culture medium was evaluated by using quantitative tests: the amount of cells (protein determination), viability (MTT test) and proliferation (incorporation of bromodeoxyuridine (BrDU). The amount of vinyl chloride before and after heat sterilisation at 120 degrees C for 30 min was found to be almost the same for all samples and without any dependence on the concentration of DEHP. The extracts of the PVC films which were tested have no toxic effect on cells in a culture medium.

  16. Polymerization of 10,16-dihydroxyhexadecanoic acid, main monomer of tomato cuticle, using the Lewis acidic ionic liquid choline chloride.2ZnCl2

    Directory of Open Access Journals (Sweden)

    Mayra Beatriz eGómez-Patiño

    2015-11-01

    Full Text Available 10,16-dihydroxyhexadecanoic acid, main monomer of the tomato cuticle obtained from agro-residual wastes, was polymerized using (choline chloride.2ZnCl2 ionic liquid as catalyst at three different temperatures (80, 90 and 100 °C. The resulting polyesters obtained under these conditions were insoluble in most of the organic solvents and showed different physicochemical properties. While at 80 °C polymers were obtained as powder, at higher temperature they were found in viscous consistency. According with the CP MAS 13C NMR and FTIR-ATR analysis, polymers showed a linear structure with an increasing degree of esterification in position C-10. Polyesters were analyzed by means of differential scanning calorimetry (DSC, atomic force microscopy (AFM and X ray diffraction (small- and wide-angle scattering, SWAXS techniques.

  17. Characterization of emissions of dioxins and furans from ethylene dichloride, vinyl chloride monomer and polyvinyl chloride facilities in the United States. Consolidated report.

    Science.gov (United States)

    Carroll, W F; Berger, T C; Borrelli, F E; Garrity, P J; Jacobs, R A; Ledvina, J; Lewis, J W; McCreedy, R L; Smith, T P; Tuhovak, D R; Weston, A F

    2001-01-01

    This is the consolidated report of emissions of PCDD/F from facilities in the organic chemical manufacturing chain leading to polyvinyl chloride. Data have been gathered from facilities in the US and Canada from a number of manufacturers and at various steps in the manufacturing process. Estimates of US emissions or transfers of PCDD/F were generated on an "Upper Bound" and "Most Likely" basis. The Most Likely estimate of US emissions of PCDD/F to the open environment, that is, air, water and land surface by facilities in this chain, based on evaluation of non-detects at one-half the detection limit is about 12 g I-TEQ per year. On this same basis, an estimated 19 g is disposed of in secure landfills.

  18. Correlation of chromosome damage and promoter methylation status of the DNA repair genes MGMT and hMLH1 in Chinese vinyl chloride monomer (VCM-exposed workers

    Directory of Open Access Journals (Sweden)

    Fen Wu

    2013-02-01

    Full Text Available Objective: To explore the association of the methylation status of MGMT and hMLH1 with chromosome damage induced by vinyl chloride monomer (VCM. Materials and Methods: Methylation of MGMT and hMLH1 was measured in 101 VCM-exposed workers by methylation-specifi c PCR. Chromosome damage in peripheral blood lymphocytes was measured by the cytokinesis-block micronucleus assay. The subjects were divided into chromosome damaged and non-damaged groups based on the normal reference value of micronuclei frequencies determined for two control groups. Results: MGMT promoter methylation was detectable in 5 out of 49 chromosome damaged subjects, but not in the chromosome non-damaged subjects; there was a signifi cant difference in MGMT methylation between the two groups (p < 0.05. Conclusions: We detected aberrant promoter methylation of MGMT in a small number of chromosome damaged VCM-exposed workers, but not in the chromosome non-damaged subjects. This preliminary observation warrants further investigation in a larger study.

  19. Preparation of chlorocholine chloride/urea deep eutectic solvent-modified silica and an examination of the ion exchange properties of modified silica as a Lewis adduct.

    Science.gov (United States)

    Tang, Baokun; Park, Ha Eun; Row, Kyung Ho

    2014-07-01

    Chlorocholine chloride/urea (ClChCl-urea), a deep eutectic solvent (DES), was applied successfully to the modification of silica. The resulting modified silica was characterized by Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller analysis, and elemental analysis. Based on the ClChCl-urea modification of silica, the ClChCl-urea-modified silica is a Lewis adduct with ion exchange properties, and ferulic acid was adsorbed on the ClChCl-urea-modified silica via an ion exchange process. The adsorbed percentage of ferulic acid increased with the increasing amount of modified silica, and a high adsorbed percentage of 89% could be obtained by the ion exchange process. The Freundlich isotherm used to describe the adsorption of ferulic acid on the modified silica by ion exchange showed a good correlation (R(2) = 0.93). Based on the characterization of the structure and the analysis of the ion exchange property of the ClChCl-urea-modified silica, the modified silica as a potential medium can be applied in some analytical technologies such as solid phase extraction, chromatography, and so on.

  20. Kinetics and mechanism for reversible chloride transfer between mercury(II) and square-planar platinum(II) chloro ammine, aqua, and sulfoxide complexes. Stabilities, spectra, and reactivities of transient metal-metal bonded platinum-mercury adducts.

    Science.gov (United States)

    Gröning, O; Sargeson, A M; Deeth, R J; Elding, L I

    2000-09-18

    The Hg2+aq- and HgCl+aq-assisted aquations of [PtCl4]2- (1), [PtCl3(H2O)]- (2), cis-[PtCl2(H2O)2] (3), trans-[PtCl2(H2O)2] (4), [PtCl(H2O)3]+ (5), [PtCl3Me2SO]- (6), trans-[PtCl2(H2O)Me2SO] (7), cis-[PtCl(H2O)2Me2SO]+ (8), trans-[PtCl(H2O)2M32SO]+ (9), trans-[PtCl2(NH3)2] (10), and cis-[PtCl2(NH3)2] (11) have been studied at 25.0 degrees C in a 1.00 M HClO4 medium buffered with chloride, using stopped-flow and conventional spectrophotometry. Saturation kinetics and instantaneous, large UV/vis spectral changes on mixing solutions of platinum complex and mercury are ascribed to formation of transient adducts between Hg2+ and several of the platinum complexes. Depending on the limiting rate constants, these adducts are observed for a few milliseconds to a few minutes. Thermodynamic and kinetics data together with the UV/vis spectral changes and DFT calculations indicate that their structures are characterized by axial coordination of Hg to Pt with remarkably short metal-metal bonds. Stability constants for the Hg2+ adducts with complexes 1-6, 10, and 11 are (2.1 +/- 0.4) x 10(4), (8 +/- 1) x 10(2), 94 +/- 6, 13 +/- 2, 5 +/- 2, 60 +/- 6, 387 +/- 2, and 190 +/- 3 M-1, respectively, whereas adduct formation with the sulfoxide complexes 7-9 is too weak to be observed. For analogous platinum(II) complexes, the stabilities of the Pt-Hg adducts increase in the order sulfoxide < aqua < ammine complex, reflecting a sensitivity to the pi-acid strength of the Pt ligands. Rate constants for chloride transfer from HgCl+ and HgCl2 to complexes 1-11 have been determined. Second-order rate constants for activation by Hg2+ are practically the same as those for activation by HgCl+ for each of the platinum complexes studied, yet resolved contributions for Hg2+ and HgCl+ reveal that the latter does not form dinuclear adducts of any significant stability. The overall experimental evidence is consistent with a mechanism in which the accumulated Pt(II)-Hg2+ adducts are not reactive

  1. Development and application of an LC-MS/MS method for the detection of the vinyl chloride-induced DNA adduct N2,3-ethenoguanine in tissues of adult and weanling rats following the exposure to [13C2]-VC

    Science.gov (United States)

    In the 1970s exposure to vinyl chloride (VC) was shown to cause liver angiosarcoma in VC workers. We have developed a new LC-MS/MS method for analyzing the promutagenic DNA adduct N2,3-ethenoguanine and have applied this to DNA from tissues of both adult and weanling rats expose...

  2. Biophysical aspects of lysozyme adduct with monocrotophos.

    Science.gov (United States)

    Amaraneni, Sreenivasa Rao; Kumar, Sudhir; Gourinath, Samudrala

    2014-09-01

    The present study on in vitro formation and characterization of lysozyme adduct with monocrotophos (MP) evaluates the potential of lysozyme to be used as a sensitive biomarker to monitor exposure levels to the commonly used organophosphorus pesticide monocrotophos. Crystallization of lysozyme protein adduct with monocrotophos was also undertaken to understand the adduct formation mechanism at a molecular level. The binding of organophosphorus pesticides to lysozyme is one of the key steps in their mutagenicity. The formation and structural characterization of lysozyme adduct with monocrotophos was done using MALDI-TOFMS, fluorescence, UV/Vis spectroscopy, circular dichroism, and X-ray diffraction studies. We report the crystal structure of lysozyme adduct with monocrotophos at 1.9 Å. It crystallized in the P43 space group with two monomers in one asymmetric unit having one molecule of monocrotophos bound to each protein chain. The results proved that the fluorescence quenching of lysozyme by monocrotophos is due to binding of monocrotophos with a tryptophan residue of lysozyme. Monocrotophos interacts most strongly with the Trp-108 and Asp-52 of lysozyme. The interactions of the monocrotophos molecule with the lysozyme suggest the formation of a stable adduct. In addition, the alteration of lysozyme secondary structure in the presence of monocrotophos was confirmed by circular dichroism and fluorescence inhibition of lysozyme by increasing monocrotophos and UV/Vis spectrophotometry. The formation of lysozyme adduct with monocrotophos was confirmed by MALDI-TOFMS.

  3. Guidelines To Select the N-Heterocyclic Carbene for the Organopolymerization of Monomers with a Polar Group

    KAUST Repository

    Falivene, Laura

    2017-02-13

    We report on the DFT stability of zwitterion and spirocycle adducts of five polar monomers with nine N-heterocyclic carbenes (NHC), covering the most typical classes of monomers and NHCs used in organopolymerization. Results indicate that the relative stability of the two adducts is dominated by the singlet-triplet energy gap of the free NHC, with low energy gaps favoring the spirocycle adduct, while high energy gaps favor the zwitterionic adduct. This basic structure/property relationship can be tuned by the hindrance of the NHC and the nature of the monomer. In addition to rationalize existing systems, the 45 NHC/monomer combinations we examined can be used as a guideline to predict the behavior of a new NHC/monomer combination.

  4. Recovery of olefin monomers

    Science.gov (United States)

    Golden, Timothy Christoph; Weist, Jr., Edward Landis; Johnson, Charles Henry

    2004-03-16

    In a process for the production of a polyolefin, an olefin monomer is polymerised said polyolefin and residual monomer is recovered. A gas stream comprising the monomer and nitrogen is subjected to a PSA process in which said monomer is adsorbed on a periodically regenerated silica gel or alumina adsorbent to recover a purified gas stream containing said olefin and a nitrogen rich stream containing no less than 99% nitrogen and containing no less than 50% of the nitrogen content of the gas feed to the PSA process.

  5. Synthesis and characterization of manganese-glycine and copper-glycine adducts

    Directory of Open Access Journals (Sweden)

    Robson Fernandes de Farias

    2002-09-01

    Full Text Available This work reports the synthesis and characterization of adducts of general formula MCl2.ngly, where M= Mn and Cu; n= 2 and 4, and gly= glycine. The manganese adducts were synthesized by dissolution of both, manganese chloride and glycine in water, whereas the copper adducts were obtained by using an alternative solid state synthesis approach. For all adducts, the obtained infrared data shows that the coordination involves the amine nitrogen atom, as well as an oxygen atom of the COO- group. The TG curves for the synthesized adducts exhibit only one mass loss step associated with the release of glycine molecules.

  6. Triphosgene mediated chlorination of Baylis-Hillman adducts

    Indian Academy of Sciences (India)

    Narender Reddy Thatikonda; Naga Sesha Sai Pavan Kumar Chebolu; Mahendar Budde; Jayathirtha Rao Vaidya

    2012-03-01

    An efficient method for the preparation of allyl chlorides from Baylis-Hillman adducts has been developed using triphosgene/pyridine system. This method is best illustrated by its advantages like operational simplicity, excellent yields, short reaction time, simple procedure and stereoselectivity.

  7. Reactivity of monofunctional cis-platinum adducts as a function of DNA sequence.

    Science.gov (United States)

    Malinge, J M; Leng, M

    1988-08-11

    The purpose of this work was to study the chemical reactivity of monofunctional cis-platinum-nucleic acid adducts as a function of nucleic acid sequence. The first part of the paper deals with the formation of these adducts. It is shown that the ternary nucleic acid-cis-platinum-ethidium bromide complexes in which ethidium bromide and nucleotide residues are cross-linked by cis-platinum, are relatively unstable at 37 degrees C. In the presence of acridine, ethidium bromide (but not cis-platinum) is slowly released which leads to the formation of monofunctional cis-platinum-nucleic acid adducts. After removal of acridine, the monofunctional adducts react further to become bifunctional. The second part of the paper deals with the kinetics of disappearance of the monofunctional adducts in several polynucleotides but not in poly(dG).poly(dC). When the adducts possess a chloride ligand, the limiting step in the cross-linking is the rate of aquation reaction of the chloride ligand. The rate constants are an order of magnitude larger when the monofunctional adducts do not possess a chloride ligand. In both the cases, the rate constants are apparently independent of the nucleic acid sequence.

  8. Feed Additives of Choline Chloride and Vitamin K3 :Dioxin Compound Concentrations and the Distribution Characteristics of Monomers%氯化胆碱和维生素K3饲料添加剂中二(噁)英类化合物浓度及其单体分布特征

    Institute of Scientific and Technical Information of China (English)

    刘志斌; 张建清; 蒋友胜; 周健; 李胜浓

    2012-01-01

    This study was conducted to investigate dioxin compound concentrations and the distribution characteristics of monomers in two kinds of common feed additives (choline chloride and vitamin K3). Seventeen samples of choline chloride and 29 samples of vitamin K3 were detected. Dioxin compounds were extracted by accelerated solvent extraction system (ASE) , purified by fluid management system ( FMS) , and quantitative analyzed by isotope dilution high resolution gas chromatography/high resolution mass spectrometry ( HRGC/ HRMS). The results showed as follows: the concentrations of dioxin compounds in choline chloride and vitamin K3 were 4. 370 and 13. 871 pg/g, respectively. The average concentration of toxic equivalent was 0.184 and 0. 379 pg WHO-TEQ/g, respectively. The toxic equivalent concentration in 1 choline chloride sample and 5 vitamin K3 samples exceeded the executive standard of European Union (0. 75 pg WHO-TEQ/g). OCDF was the dominant contributory congener both in the samples of choline chloride and vitamin K3, and the main contributors of toxic equivalent were 2 ,3 ,4,7,8-PeCDF and 1,2 ,3 ,4,7,8-HxCDF. Furthermore, PCDFs accounted for 88% and 97% of total toxic equivalent in choline chloride and vitamin K3, respectively, and was the main pollutant in the distribution characteristic of pollutional congeners. [ Chinese Journal of Animal Nutrition, 2012, 24(10) :2006-2012]%本试验旨在调查2种常用饲料添加剂氯化胆碱和维生素K3中二(噁)英类化合物浓度及其单体分布特征.共检测17个氯化胆碱和29个维生素K3样品,二(噁)英化合物分别采用加速溶剂萃取仪和自动纯化系统进行提取和净化,并采用同位素稀释-高分辨气相色谱/高分辨双聚焦磁式质谱联用技术(HRGC/HRMS)进行准确定量分析检测.结果表明:氯化胆碱与维生素K3中二(噁)英类化合物浓度分别为4.370和13.871 pg/g,它们的毒性当量平均浓度分别是0.184和0.379 pg WHO-TEQ/g,其中有1

  9. Synthesis of acrylic and allylic bifunctional cross-linking monomers derived from PET waste

    Science.gov (United States)

    Cruz-Aguilar, A.; Herrera-González, A. M.; Vázquez-García, R. A.; Navarro-Rodríguez, D.; Coreño, J.

    2013-06-01

    An acrylic and two novel allylic monomers synthesized from bis (hydroxyethyl) terephthalate, BHET, are reported. This was obtained by glycolysis of post-consumer PET with boiling ethylene glycol. The bifunctional monomer bis(2-(acryloyloxy)ethyl) terephthalate was obtained from acryloyl chloride, while the allylic monomers 2-(((allyloxi)carbonyl)oxy) ethyl (2-hydroxyethyl) terephthalate and bis(2-(((allyloxi)carbonyl)oxy)ethyl) terephthalate, from allyl chloroformate. Cross-linking was studied in bulk polymerization using two different thermal initiators. Monomers were analyzed by means of 1H NMR and the cross-linked polymers by infrared spectroscopy. Gel content higher than 90% was obtained for the acrylic monomer. In the case of the mixture of the allylic monomers, the cross-linked polymer was 80 % using BPO initiator, being this mixture 24 times less reactive than the acrylic monomer.

  10. Alcohol, Aldehydes, Adducts and Airways.

    Science.gov (United States)

    Sapkota, Muna; Wyatt, Todd A

    2015-11-05

    Drinking alcohol and smoking cigarettes results in the formation of reactive aldehydes in the lung, which are capable of forming adducts with several proteins and DNA. Acetaldehyde and malondialdehyde are the major aldehydes generated in high levels in the lung of subjects with alcohol use disorder who smoke cigarettes. In addition to the above aldehydes, several other aldehydes like 4-hydroxynonenal, formaldehyde and acrolein are also detected in the lung due to exposure to toxic gases, vapors and chemicals. These aldehydes react with nucleophilic targets in cells such as DNA, lipids and proteins to form both stable and unstable adducts. This adduction may disturb cellular functions as well as damage proteins, nucleic acids and lipids. Among several adducts formed in the lung, malondialdehyde DNA (MDA-DNA) adduct and hybrid malondialdehyde-acetaldehyde (MAA) protein adducts have been shown to initiate several pathological conditions in the lung. MDA-DNA adducts are pre-mutagenic in mammalian cells and induce frame shift and base-pair substitution mutations, whereas MAA protein adducts have been shown to induce inflammation and inhibit wound healing. This review provides an insight into different reactive aldehyde adducts and their role in the pathogenesis of lung disease.

  11. Ionic Liquid Epoxy Resin Monomers

    Science.gov (United States)

    Paley, Mark S. (Inventor)

    2013-01-01

    Ionic liquid epoxide monomers capable of reacting with cross-linking agents to form polymers with high tensile and adhesive strengths. Ionic liquid epoxide monomers comprising at least one bis(glycidyl) N-substituted nitrogen heterocyclic cation are made from nitrogen heterocycles corresponding to the bis(glycidyl) N-substituted nitrogen heterocyclic cations by a method involving a non-nucleophilic anion, an alkali metal cation, epichlorohydrin, and a strong base.

  12. Binding interactions between suberin monomer components and pesticides

    Energy Technology Data Exchange (ETDEWEB)

    Olivella, M.À., E-mail: angels.olivella@udg.edu [Department of Chemical Engineering, Escola Politècnica Superior, Universitat de Girona, Maria Aurèlia Capmany, 61, 17071 Girona (Spain); Bazzicalupi, C.; Bianchi, A. [Department of Chemistry “Ugo Schiff”, University of Florence, Via della Lastruccia, 3, 50019 Sesto Fiorentino (Italy); Río, J.C. del [Instituto de Recursos Naturales y Agrobiología de Sevilla, Consejo Superior de Investigaciones Científicas, P.O. Box 1052, 41080 Seville (Spain); Fiol, N.; Villaescusa, I. [Department of Chemical Engineering, Escola Politècnica Superior, Universitat de Girona, Maria Aurèlia Capmany, 61, 17071 Girona (Spain)

    2015-09-15

    Understanding the role of biomacromolecules and their interactions with pollutants is a key for elucidating the sorption mechanisms and making an accurate assessment of the environmental fate of pollutants. The knowledge of the sorption properties of the different constituents of these biomacromolecules may furnish a significant contribution to this purpose. Suberin is a very abundant biopolymer in higher plants. In this study, suberin monomers isolated from cork were analyzed by thermally-assisted methylation with tetramethylammonium hydroxide (TMAH) in a pyrolysis unit coupled to gas chromatography–mass spectrometry (GC/MS). The isolated monomer mixture was used to study the sorption of three pesticides (isoproturon, methomyl and oxamyl). The modes of pesticide–sorbent interactions were analyzed by means of two modeling calculations, the first one representing only the mixture of suberin monomers used in the sorption study, and the second one including glycerol to the mixture of suberin monomers, as a building block of the suberin molecule. The results indicated that the highest sorption capacity exhibited by the sorbent was for isoproturon (33%) being methomyl and oxamyl sorbed by the main suberin components to a lesser extent (3% and < 1%, respectively). In addition to van der Waals interactions with the apolar region of sorbent and isoproturon, modeling calculations evidenced the formation of a hydrogen bond between the isoproturon NH group and a carboxylic oxygen atom of a suberin monomer. In the case of methomyl and oxamyl only weak van der Waals interactions stabilize the pesticide–sorbent adducts. The presence of glycerol in the model provoked significant changes in the interactions with isoproturon and methomyl. - Highlights: • Suberin has low affinity to retain pesticides of aliphatic character. • Suberin has a moderate affinity to adsorb isoproturon. • Modeling calculations show that apolar portion of suberin interacts with isoproturon.

  13. Monomer Migration and Annihilation Processes

    Institute of Scientific and Technical Information of China (English)

    KE Jian-Hong; LIN Zhen-Quan; ZHUANG You-Yi

    2005-01-01

    We propose a two-species monomer migration-annihilation model, in which monomer migration reactions occur between any two aggregates of the same species and monomer annihilation reactions occur between two different species. Based on the mean-field rate equations, we investigate the evolution behaviors of the processes. For the case with an annihilation rate kernel proportional to the sizes of the reactants, the aggregation size distribution of either species approaches the modified scaling form in the symmetrical initial case, while for the asymmetrical initial case the heavy species with a large initial data scales according to the conventional form and the light one does not scale. Moreover,at most one species can survive finally. For the case with aconstant annihilation rate kernel, both species may scale according to the conventional scaling law in the symmetrical case and survive together at the end.

  14. INFLUENCES OF WATER-SOLUBLE CATIONIC MONOMERS ON THE POLYMERIZATION RATE IN THE INVERSE EMULSION

    Institute of Scientific and Technical Information of China (English)

    HOU Sijian; HA Runhua

    1996-01-01

    This investigation deals with the free radical polymerization both of (2-methacryloyloxyethyl) trimethyl ammonium chloride (QACEMA) and of diallyldimethyl ammonium chloride (DADMAC) in inverse emulsion. The influences of some factors, such as the concentration of monomers, initiator and emulsifier are discussed. The polymerization rate equations of above two monomers can be written as follows:Rp = k[M]1.21[I]0.82[E]0.57 (for QACEMA)Rp = k′[M]1.34[I]0.90[E]0.62 (for DADMAC)

  15. The analysis of high explosives by liquid chromatography/electrospray ionization mass spectrometry: multiplexed detection of negative ion adducts.

    Science.gov (United States)

    Mathis, John A; McCord, Bruce R

    2005-01-01

    The negative ion electrospray ionization mass spectrometric (ESI-MS) detection of adducts of high explosives with chloride, formate, acetate, and nitrate was used to demonstrate the gas-phase interaction of neutral explosives with these anions. The relative intensities of the adduct species were determined to compare the competitive formation of the selected high explosives and anions. The relative stability of the adduct species varies, yielding preferential formation of certain anionic adducts with different high explosives. To exploit this effect, an isocratic high-performance liquid chromatography (HPLC)/ESI-MS method was developed and used for the simultaneous analysis of high explosives using two different techniques for the addition of the anionic additives; pre- and post-column. The results show that the pre-column approach provides similar results with improved selectivity for specific explosives. By detecting characteristic adduct species for each explosive, this method provides a qualitative and quantitative approach for the analysis and identification of high explosives.

  16. Effects of vinyl chloride monomer on cell cycle and expression of mir-21 and mir-192 in liver of rat%氯乙烯亚慢性染毒对大鼠肝细胞周期及mir-21和mir-192表达的影响

    Institute of Scientific and Technical Information of China (English)

    梁洁; 胡君阳; 高怡; 田凤洁; 吕懿; 仇玉兰

    2016-01-01

    Objective To explore the sub-chronic toxicity effects of vinyl chloride monomer (VCM) on cell cycle and the expression of cell cycle related microRNA 21 (mir-21)and microRNA 192 (mir-192) of rat liver.Methods Thirty-two healthy sprague dawley (SD) rats were randomly divided into three VCM exposure groups (5 mg/kg,25 mg/kg and 125 mg/kg) and a control group (25 mg/kg clean air).The rats were exposed by intraperitoneal injection three times a week (every other day) for three months.The flow cytometry was used to measure the percent of each phase(G0/G1,S,and G2/M).The mir-21 and mir-192 was extracted and then quantified using real-time fluorescent quantitative PCR.Results The percentage of each phase of cell cycle was not significantly different among four groups (all P > 0.05).The proportion of S-phase cells in 125 mg/kg group was higher than the control group(t =-4.363,P =0.024).Besides,the expressions of mir-21 varied significantly among four groups (H =16.064,P =0.001) and,furthermore,decreased significantly in both 25 mg/kg and 125 mg/kg group when they were compared with control and 5 mg/kg group (all P <0.05).Meanwhile,the expressions of mir-192 also varied significantly (H =15.939, P =0.001),and decreased significantly in both 25 mg/kg and 125 mg/kg group,compared with control and 5 mg/kg group (all P < 0.05).Conclusions VCM subchronic exposure induced the increase of S-phase cells and decrease of the expression of mir-21 and mir-192.%目的 探讨氯乙烯(vinyl chloride monomer,VCM)亚慢性染毒对大鼠肝细胞周期以及microRNA21(mir-21)和microRNA192 (mir-192)表达量的影响.方法 将32只健康斯普拉-道来(sprague dawley,SD)大鼠随机分为三个实验组(5 mg/kg组,25 mg/kg组和125 mg/kg组)与一个对照组(25 mg/kg清洁空气组),每组8只.采用腹腔注射进行VCM染毒,每周3次(隔日染毒).染毒12周,处死大鼠并摘取肝组织.制备肝单细胞悬液,使用流式细胞技术检测G0/G1期、S期和G2/M期肝细

  17. Formation of fractals by the self-assembly of interpolymer adducts of polymethacrylic acid with complementary polymers in aqueous solution

    Indian Academy of Sciences (India)

    Kandhasamy Durai Murugan; Arlin Jose Amali; Paramasivam Natarajan

    2012-03-01

    Interpolymer adducts of poly(methacrylic acid), (PMAA), with poly(vinylpyrrolidone) in presence of sodium chloride or potassium chloride form highly ordered fractal patterns in films on glass surface on drying at ambient temperature. The structure, morphology and the conditions under which the formation of fractal patterns occurs were investigated by SEM, EDX and confocal microscopic techniques. Self-organization of PMAA with complementary polymers such as poly(vinylpyrrolidone) is well-known and in the presence of sodium chloride formation of the fractals in films of the adducts is a novel observation. Fractal formation occurs due to the aggregation of interpolymer adducts. The composition of the fractals in the film is studied by EDX and confocal microscopic images of the fluorophores covalently bound to PMAA. In presence of salts, sodium chloride or potassium chloride, micellar like entities of 80 nm size were formed which further aggregate to form fractal patterns. It is suggested that the fractals result from the interpolymer adduct by Diffusion Limited Aggregation mechanism.

  18. GENERAL: Cluster Growth Through Monomer Adsorption Processes

    Science.gov (United States)

    Ke, Jian-Hong; Lin, Zhen-Quan; Chen, Xiao-Shuang

    2010-02-01

    We propose a monomer adsorption model, in which only the monomers are allowed to diffuse and adsorb onto other clusters. By means of the generalized rate equation we investigate the kinetic behavior of the system with a special rate kernel. For the system without monomer input, the concentration aj(t) of the Aj clusters (j > 1) asymptotically retains a nonzero quantity, while for the system with monomer input, it decays with time and vanishes finally. We also investigate the kinetics of an interesting model with fixed-rate monomer adsorption. For the case without monomer source, the evolution of the system will halt at a finite time; while the system evolves infinitely in time in the case with monomer source. Finally, we also suggest a connection between the fixed-rate monomer adsorption systems and growing networks.

  19. Halothane potentiates the alcohol-adduct induced TNF-alpha release in heart endothelial cells

    Directory of Open Access Journals (Sweden)

    Freeman Thomas L

    2005-04-01

    Full Text Available Abstract Background The possibility exists for major complications to occur when individuals are intoxicated with alcohol prior to anesthetization. Halothane is an anesthetic that can be metabolized by the liver into a highly reactive product, trifluoroacetyl chloride, which reacts with endogenous proteins to form a trifluoroacetyl-adduct (TFA-adduct. The MAA-adduct which is formed by acetaldehyde (AA and malondialdehyde reacting with endogenous proteins, has been found in both patients and animals chronically consuming alcohol. These TFA and MAA-adducts have been shown to cause the release of inflammatory products by various cell types. If both adducts share a similar mechanism of cell activation, receiving halothane anesthesia while intoxicated with alcohol could exacerbate the inflammatory response and lead to cardiovascular injury. Methods We have recently demonstrated that the MAA-adduct induces tumor necrosis factor-α (TNF-α release by heart endothelial cells (HECs. In this study, pair and alcohol-fed rats were randomized to receive halothane pretreatments intra peritoneal. Following the pretreatments, the intact heart was removed, HECs were isolated and stimulated with unmodified bovine serum albumin (Alb, MAA-modified Alb (MAA-Alb, Hexyl-MAA, or lipopolysaccharide (LPS, and supernatant concentrations of TNF-α were measured by ELISA. Results Halothane pre-treated rat HECs released significantly greater TNF-α concentration following MAA-adduct and LPS stimulation than the non-halothane pre-treated in both pair and alcohol-fed rats, but was significantly greater in the alcohol-fed rats. Conclusion These results demonstrate that halothane and MAA-adduct pre-treatment increases the inflammatory response (TNF-α release. Also, these results suggest that halothane exposure may increase the risk of alcohol-induced heart injury, since halothane pre-treatment potentiates the HEC TNF-α release measured following both MAA-Alb and LPS

  20. DNA adducts-chemical addons

    Directory of Open Access Journals (Sweden)

    T R Rajalakshmi

    2015-01-01

    Full Text Available DNA adduct is a piece of DNA covalently bond to a chemical (safrole, benzopyrenediol epoxide, acetaldehyde. This process could be the start of a cancerous cell. When a chemical binds to DNA, it gets damaged resulting in abnormal replication. This could be the start of a mutation and without proper DNA repair, this can lead to cancer. It is this chemical that binds with the DNA is our prime area of concern. Instead of performing the whole body analysis for diagnosing cancer, this test could be carried out for early detection of cancer. When scanning tunneling microscope is used, the DNA results can be obtained earlier. DNA adducts in scientific experiments are used as biomarkers.

  1. DNA adducts-chemical addons

    Science.gov (United States)

    Rajalakshmi, T. R.; AravindhaBabu, N.; Shanmugam, K. T.; Masthan, K. M. K.

    2015-01-01

    DNA adduct is a piece of DNA covalently bond to a chemical (safrole, benzopyrenediol epoxide, acetaldehyde). This process could be the start of a cancerous cell. When a chemical binds to DNA, it gets damaged resulting in abnormal replication. This could be the start of a mutation and without proper DNA repair, this can lead to cancer. It is this chemical that binds with the DNA is our prime area of concern. Instead of performing the whole body analysis for diagnosing cancer, this test could be carried out for early detection of cancer. When scanning tunneling microscope is used, the DNA results can be obtained earlier. DNA adducts in scientific experiments are used as biomarkers. PMID:26015708

  2. Facile synthesis of allyl resinate monomer in an aqueous solution under microwave irradiation

    Indian Academy of Sciences (India)

    Yanju Lu; Mixia Wang; Zhendong Zhao; Yuxiang Chen; Shichao Xu; Jing Wang; Liangwu Bi

    2015-07-01

    We have developed a facile method for production of allyl resinate monomer (allyl rosin ester) via a phase transfer reaction under microwave irradiation. The synthesis of allyl resinate was conducted using allyl chloride and sodium resinate as starting materials in aqueous solution at 50°C for 30 min with a yield of 94.7%, which is 20% higher than conventional heating method. The products precipitated spontaneously from the aqueous phase after reaction, which significantly facilitated the subsequent separation of monomer products. The synthesized monomer product appeared as a viscous liquid, with a viscosity of 460 mPa·s at 25°C and a density of 1.0469 g/cm3. The physical and chemical properties suggested that the synthesized monomer has great potential for free radical polymerization.

  3. Spectral characterization of environment-sensitive adducts of interleukin-1 beta.

    Science.gov (United States)

    Epps, D E; Yem, A W; Fisher, J F; McGee, J E; Paslay, J W; Deibel, M R

    1992-02-15

    We have determined the fluorescence properties of two covalently attached acrylodan derivatives of recombinant human interleukin-1 beta, namely the Cys-8 and Lys-103 adducts. The emission and excitation maxima indicated the presence of two operationally distinct conformers for each probe. The iodide quenching and the kinetics of fluorescence changes associated with guanidinium chloride-induced denaturation show that each covalent adduct exists both in hydrated and dehydrated environments. Furthermore, fluorescence changes associated with the binding of the adducts to a recombinant soluble murine receptor indicated that only the conformers with the label in the hydrophobic environment are competent toward the soluble murine interleukin receptor and that the hydrated and dehydrated conformers are in a dynamic equilibrium on the time scale of the binding experiments.

  4. Sodium adduct formation efficiency in ESI source.

    Science.gov (United States)

    Kruve, Anneli; Kaupmees, Karl; Liigand, Jaanus; Oss, Merit; Leito, Ivo

    2013-06-01

    Formation of sodium adducts in electrospray (ESI) has been known for long time, but has not been used extensively in practice, and several important aspects of Na(+) adduct formation in ESI source have been almost unexplored: the ionization efficiency of different molecules via Na(+) adduct formation, its dependence on molecular structure and Na(+) ion concentration in solution, fragmentation behaviour of the adducts as well as the ruggedness (a prerequisite for wider practical use) of ionization via Na(+) adduct formation. In this work, we have developed a parameter describing sodium adducts formation efficiency (SAFE) of neutral molecules and have built a SAFE scale that ranges for over four orders of magnitude and contains 19 compounds. In general, oxygen bases have higher efficiency of Na(+) adducts formation than nitrogen bases because of the higher partial negative charge on oxygen atoms and competition from protonation in the case of nitrogen bases. Chelating ability strongly increases the Na(+) adduct formation efficiency. We show that not only protonation but also Na(+) adduct formation is a quantitative and reproducible process if relative measurements are performed.

  5. A convenient and stereoselective synthesis of (Z)-allyl selenides via Sm/TMSCI system-promoted coupling of Baylis-Hillman adducts with diselenides

    Institute of Scientific and Technical Information of China (English)

    LIU Yun-kui; XU Dan-qian; XU Zhen-yuan; ZHANG Yong-min

    2006-01-01

    A simple and convenient procedure for stereoselective synthesis of (Z)-allyl selenides has been developed by a one-pot reaction of diselenides with Baylis-Hillman adducts in the presence of samarium metal-trimethylsilyl chloride under mild conditions. Presumably, the diselenides are cleaved by Sm/TMSCl system to form selenide anions, which then undergo SN2' substitution of Baylis-Hillman adducts to produce the (Z)-allyl selenides.

  6. Surface active monomers synthesis, properties, and application

    CERN Document Server

    Borzenkov, Mykola

    2014-01-01

    This brief includes information on the background?of and development of synthesis of various types of surface active monomers. The authors explain the importance of utilization of surface active monomers for creation of surface active polymers? and the various biomedical applications of such compounds . This brief introduces techniques for the synthesis of novel types of surface active monomers, their colloidal and polymerizable properties and application for needs of medicine and biology.

  7. Cutin and suberin monomers are membrane perturbants.

    Science.gov (United States)

    Douliez, Jean-Paul

    2004-03-15

    The interaction between cutin and suberin monomers, i.e., omega -hydroxylpalmitic acid, alpha, omega -hexadecanedioic acid, alpha, omega --hexadecanediol, 12-hydroxylstearic acid, and phospholipid vesicles biomimicking the lipid structure of plant cell membranes has been studied by optical and transmission electron microscopy, quasielastic light scattering, differential scanning calorimetry, and (31)P solid-state NMR. Monomers were shown to penetrate model membranes until a molar ratio of 30%, modulating their gel to fluid-phase transition, after which monomer crystals also formed in solution. These monomers induced a decrease of the phospholipid vesicle size from several micrometers to about 300 nm. The biological implications of these findings are discussed.

  8. Polyelectrolyte properties of proteoglycan monomers

    Science.gov (United States)

    Li, Xiao; Reed, Wayne F.

    1991-03-01

    Light scattering measurements were made on proteoglycan monomers (PGM) over a wide range of ionic strengths Cs, and proteoglycan concentrations [PG]. At low Cs there were clear peaks in the angular scattering intensity curve I(q), which moved towards higher scattering wave numbers q, as [PG]1/3. This differs from the square root dependence of scattering peaks found by neutron scattering from more concentrated polyelectrolyte solutions. The peaks remained roughly fixed as Cs increased, but diminished in height, and superposed I(q) curves yielded a sort of isosbestic point. Under certain assumptions the static structure factor S(q) could be extracted from the measured I(q), and was found to retain a peak. A simple hypothesis concerning coexisting disordered and liquidlike correlated states is presented, which qualitatively accounts for the most salient features of the peaks. There was evidence of a double component scattering autocorrelation decay at low Cs, which, when resolved into two apparent diffusion coefficients, gave the appearance of simultaneous ``ordinary'' and ``extraordinary'' phases. The extraordinary phase was ``removable,'' however, by filtering. At higher Cs the proteoglycans appear to behave as random nonfree draining polyelectrolyte coils, with a near constant ratio of 0.67 between hydrodynamic radius and radius of gyration. The apparent persistence length varied as roughly the -0.50 power of ionic strength, similar to various linear synthetic and biological polyelectrolytes. Electrostatic excluded volume theory accounted well for the dependence of A2 on Cs.

  9. Controlling monomer-sequence using supramolecular templates

    OpenAIRE

    ten Brummelhuis, Niels

    2014-01-01

    The transcription and translation of information contained in nucleic acids that has been perfected by nature serves as inspiration for chemists to devise strategies for the creation of polymers with welldefined monomer sequences. In this review the various approaches in which templates (either biopolymers or synthetic ones) are used to influence the monomer-sequence are discussed.

  10. Chloride transference during electrochemical chloride extraction process

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Chemical titration method and lab-made chloride probes were jointly adopted to investigate the effects of water-to-cement (W/C) ratio and the impressed current density on chloride transport for cement-based materials during electrochemical chloride extraction (ECE) process.The dissolution of bound chlorides and the effect of current density on dissolution were analyzed.The variations of chloride concentration at different depths and the chloride transference process were monitored.Test results show that W/C ratios adopted have slight influence on chloride extraction,while chloride extraction efficiency is mainly determined by the impressed current density.During ECE process a portion of bound chloride ions dissolved and the amount of bound chlorides released is directly proportional to current density.

  11. Redshift or adduct stabilization -- a computational study of hydrogen bonding in adducts of protonated carboxylic acids

    DEFF Research Database (Denmark)

    Olesen, Solveig Gaarn; Hammerum, Steen

    2009-01-01

    changes and the redshift favor the Z OH group, matching the results of NBO and AIM calculations. This reflects that the thermochemistry of adduct formation is not a good measure of the hydrogen bond strength in charged adducts, and that the ionic interactions in the E and Z adducts of protonated......It is generally expected that the hydrogen bond strength in a D-H-A adduct is predicted by the difference between the proton affinities of D and A, measured by the adduct stabilization, and demonstrated by the IR redshift of the D-H bond stretching vibrational frequency. These criteria do...... not always yield consistent predictions, as illustrated by the hydrogen bonds formed by the E and Z OH groups of protonated carboxylic acids. The delta-PA and the stabilization of a series of hydrogen bonded adducts indicate that the E OH group forms the stronger hydrogen bonds, whereas the bond length...

  12. Cyclic Polymer with Alternating Monomer Sequence.

    Science.gov (United States)

    Zhu, Wen; Li, Zi; Zhao, Youliang; Zhang, Ke

    2015-11-01

    Cyclic polymers with alternating monomer sequence are synthesized for the first time based on the ring-closure strategy. Well-defined telechelic alternating polymers are synthesized by reversible addition-fragmentation chain transfer polymerization by copolymerizing the electron acceptor monomer of N-benzylmaleimide and donor monomer of styrene with a feed ratio of 1 between them. The corresponding cyclic alternating polymers are then produced by the UV-induced Diels-Alder click reaction to ring-close the linear alternating polymer precursors under highly diluted reaction solution.

  13. Tribenzylammonium chloride

    Directory of Open Access Journals (Sweden)

    Waly Diallo

    2014-05-01

    Full Text Available Single crystals of the title salt, C21H21NH+·Cl−, were isolated as a side product from the reaction involving [(C6H5CH23NH]2[HPO4] and Sn(CH33Cl in ethanol. Both the cation and the anion are situated on a threefold rotation axis. The central N atom in the cation has a slightly distorted tetrahedral environment, with angles ranging from 107.7 to 111.16 (10°. In the crystal, the tribenzylammonium cations and chloride anions are linked through N—H...Cl and C—H...Cl hydrogen bonds, leading to the formation of infinite chains along [001]. The crystal studied was a merohedral twin.

  14. Non Covalent Interactions and Internal Dynamics in Adducts of Freons

    Science.gov (United States)

    Caminati, Walther; Gou, Qian; Evangelisti, Luca; Feng, Gang; Spada, Lorenzo; Vallejo-López, Montserrat; Lesarri, Alberto; Cocinero, Emilio J.

    2014-06-01

    The complexation of chlorofluorocarbons (CFCs) with atmospheric water and pollutants of the atmosphere affects their reactivity and it seems to accelerate, for example, the decomposition rate of freons in the atmosphere [1]. For this reason we characterized shapes, stabilities, nature of the non-covalent interactions, structures and internal dynamics of a number of complexes of CFCs with water and of their dimers or oligomers by rotational spectroscopy. It has been found that hydrogenated CFCs form adducts with other molecules through weak hydrogen bonds (WHBs). Their C-H groups can act as proton donors, enhanced by the electron withdrawing of the halogen atoms, interacting with the electron rich regions of the partner molecules [2]. Also in adducts or oligomers of hydrogenated CFCs the monomer units are held together by nets of WHBs [3]. When CFCs are perhalogenated, the positive electrostatic region ("σ-hole") can interact electrostatically with negative sites of another, or of the same molecular entity, giving rise, according to IUPAC, to the so called halogen bond (HaB). However, it has been observed that when the perhalogenated CFCs has a Π electron system, a lone pair•••Π interaction (Bürgi-Dunitz) is favoured [4]. We describe here the HaBs that CF4 and CF3Cl form with a variety of partner molecules such as water, ammonia, dimethyl ether, etc. Important spectroscopic features outline strong dynamics effects taking place in this kind of complex. References [1] V. Vaida, H. G. Kjaergaard, K. J. Feierabend, Int. Rev. Phys. Chem. 22 (2003) 203. [2] See, for example: W. Caminati, S. Melandri, A. Maris, P. Ottaviani, Angew. Chem. Int. Ed. 45 (2006) 2438. [3] G. Feng, L. Evangelisti, I. Cacelli, L. Carbonaro, G. Prampolini, W. Caminati, Chem. Commun. 50 (2014) 171. [4] Q. Gou, G. Feng, L. Evangelisti, W. Caminati, Angew. Chem. Int. Ed. 52 (2013) 52 11888.

  15. Quantum Chemical Studies on Detail Mechanism of Nitrosylation of NAMI-A-HSA Adduct.

    Science.gov (United States)

    Das, Dharitri; Mondal, Paritosh

    2015-08-20

    Hydrolysis of NAMI-A in NAMI-A-HSA (HSA = human serum albumin) and nitrosylation of hydrolyzed NAMI-A-HSA adduct have been studied in detail using density functional theory method. It has been observed that the chloride exchange reaction with water in the NAMI-A-HSA adduct follows an interchange dissociative mechanism passing through an unstable heptacoordinated activated complex. The computed free energy of activation (ΔG) and rate constant (k) for the hydrolysis process in aqueous medium are observed to be 24.85 kcal mol(-1) and 3.81 × 10(-6) s(-1), respectively. Nitrosylation of hydrolyzed NAMI-A-HSA adduct with nitric oxide is found to be thermodynamically more favorable with the incorporation of solvent effect and provides a detailed understanding related to the antimetastatic activity of the NAMI-A drug. This investigation shows that nitric oxide coordinates linearly to NAMI-A-HSA adduct leading to the reduction of ruthenium(III) to more active ruthenium(II), with the reduction potential of -2.32 V. Negative relative solvation and relative binding free energies suggest that the hydrolysis and nitrosylation reactions are found to be thermodynamically favorable and faster. Our computed results provide a detailed thermodynamics and kinetics which may be highly beneficial for understanding antimetastatic activity as well as the nitric oxide scavenging ability of NAMI-A.

  16. Lysine adducts between methyltetrahydrophthalic anhydride and collagen in guinea pig lung.

    Science.gov (United States)

    Jönsson, B A; Wishnok, J S; Skipper, P L; Stillwell, W G; Tannenbaum, S R

    1995-11-01

    The formation of adducts between methyltetrahydrophthalic anhydride (MTHPA), an important industrial chemical and potent allergen, and collagen from guinea pig lung tissue was investigated. Collagen peptides were obtained from the lung tissue by homogenization, defatting, washing, and digestion with collagenase. In experiments in vitro, lung tissue was exposed to 8.4 mumol (50 microCi) of 14C MTHPA. The amount of adducts was 97 nmol MTHPA/g of wet tissue as determined from the bound radioactivity. In a study in vivo, four guinea pigs were injected intratracheally with 8.4 mumol of 14C MTHPA each. The amount of adducts was 0-1.2 nmol MTHPA/g of wet tissue (determined by bound radioactivity). N epsilon-methyltetrahydrophthaloyl-L-lysine (MTHPL) was synthesized and characterized by NMR, UV, and mass spectrometry (MS). A method to analyze MTHPL, after derivatization with methanol and pentafluorobenzoyl chloride, using gas chromatography-MS was developed. Analysis of Pronase-digested MTHPA-exposed lung tissue showed a concentration of 19 nmol MTHPL/g wet lung in vitro and between 0 and 0.15 nmol MTHPL/g wet lung in vivo. Thus, 20% in vitro and 12-15% in vivo of the bound radioactivity was found as adducts with lysine. These results are a first step toward studies of allergenic epitopes in proteins and methods for biological monitoring of exposure to acid anhydrides.

  17. Detection of DNA adducts by bioluminescence

    Science.gov (United States)

    Xu, Shunqing; Tan, Xianglin; Yao, Qunfeng; He, Min; Zhou, Yikai; Chen, Jian

    2001-09-01

    Luminescent assay for detection ATP is very sensitive with limitation of 10-17 moles. ATP using styrene oxide as a model carcinogen we currently apply a luminescence technique to detect the very low levels of carcinogen-DNA adducts in vitro and in vivo. The bioluminescent assay of DNA adducts entails three consecutive steps: digestion of modified DNA to adducted dinucleoside monophosphate and normal nucleotide are hydrolyzed to nucleosides (N) by nuclease P1 and prostatic acid phosphomonesterase (PAP); incorporation of (gamma) -P of ATP into normal nucleoside(N); detection of consumption of ATP by luminescence. This assay does not require separate manipulation because of the selective property of nuclease P1. One fmol of carcinogen- DNA adducts was detected by luminescent assay. A good correlation between results of luminescent assay and 32P-postlabeling procedures has been observed. We detect 1 adduct in 108 nucleotides for 10(mu) g DNA sample. The procedures of luminescent method is very simple and low- cost. IT appears applicable to the ultra sensitive detection of low levels of DNA adducts without radioactive isotope.

  18. Local and systemic effects of unpolymerised monomers

    Directory of Open Access Journals (Sweden)

    Sulekha Siddharth Gosavi

    2010-01-01

    Full Text Available Methyl methacrylate (MMA, a widely used monomer in dentistry and medicine has been reported to cause abnormalities or lesions in several organs. Experimental and clinical studies have documented that monomers may cause a wide range of adverse health effects such as irritation to skin, eyes, and mucous membranes, allergic dermatitis, stomatitis, asthma, neuropathy, disturbances of the central nervous system, liver toxicity, and fertility disturbances.

  19. Synthesis of the diazonium (perfluoroalkyl) benzenesulfonimide monomer from Nafion monomer for proton exchange membrane fuel cells

    Science.gov (United States)

    Mei, Hua; D'Andrea, Dan; Nguyen, Tuyet-Trinh; Nworie, Chima

    2014-02-01

    One diazonium (perfluoroalkyl) benzenesulfonimide monomer, perfluoro-3, 6-dioxa-4-methyl-7-octene benzenesulfonyl imide, has been synthesized from Nafion monomer for the first time. With trifluorovinyl ether and diazonium precursors, the partially-fluorinated diazonium PFSI monomer can be polymerized and will provide chemically bonding with carbon electrode in proton exchange membrane fuel cells. A systematic study of the synthesis and characterization of this diazonium PFSI monomer has been conducted by varying reaction conditions. The optimized synthesis method has been established in the lab.

  20. New DNA adducts of crotonaldehyde and acetaldehyde.

    Science.gov (United States)

    Hecht, S S; McIntee, E J; Wang, M

    2001-09-14

    This paper summarizes our recent studies on adducts produced in the reactions of the carcinogens crotonaldehyde (2-butenal) and acetaldehyde with deoxyguanosine (dG) and DNA. Human exposure to these carcinogens can be considerable, from both exogenous and endogenous sources. Crotonaldehyde reacts with DNA to form Michael addition products, a pathway that has been well described. We describe a second major pathway, in which 3-hydroxybutanal, formed by addition of H(2)O to crotonaldehyde, reacts with DNA to produce the Schiff base N(2)-(3-hydroxybut-1-ylidene)dG as well as several diastereomers of N(2)-paraldol-dG. Acetaldehyde reacts with DNA and dG giving a major Schiff base adduct, N(2)-ethylidene-dG. A cross-linked adduct of acetaldehyde has been characterized for the first time, and other adducts resulting from the reaction of two and three molecules of acetaldehyde with dG have been observed. The results of these studies demonstrate that some structurally unique adducts are formed from these carcinogenic aldehydes and suggest some new directions for research on the potential role of aldehydes in human cancer.

  1. Cationically polymerizable monomers derived from renewable sources

    Energy Technology Data Exchange (ETDEWEB)

    Crivello, J.V.

    1992-10-01

    The objectives of this project are to design and synthesize novel monomers which orginate from renewable biological sources and to carry out their rapid, efficient, pollution-free and energy efficient cationic polymerization to useful products under the influence of ultraviolet light or heat. A summary of the results of the past year's research on cationically polymerizable monomers derived from renewable sources is presented. Three major areas of investigation corresponding to the different classes of naturally occurring starting materials were investigated; epoxidized terpenes and natural rubber and vinyl ethers from alcohols and carbohydrates.

  2. Cationically polymerizable monomers derived from renewable sources

    Energy Technology Data Exchange (ETDEWEB)

    Crivello, J.V.

    1992-10-01

    The objectives of this project are to design and synthesize novel monomers which orginate from renewable biological sources and to carry out their rapid, efficient, pollution-free and energy efficient cationic polymerization to useful products under the influence of ultraviolet light or heat. A summary of the results of the past year's research on cationically polymerizable monomers derived from renewable sources is presented. Three major areas of investigation corresponding to the different classes of naturally occurring starting materials were investigated; epoxidized terpenes and natural rubber and vinyl ethers from alcohols and carbohydrates.

  3. Sperm DNA oxidative damage and DNA adducts

    Science.gov (United States)

    Jeng, Hueiwang Anna; Pan, Chih-Hong; Chao, Mu-Rong; Lin, Wen-Yi

    2015-01-01

    The objective of this study was to investigate DNA damage and adducts in sperm from coke oven workers who have been exposed to polycyclic aromatic hydrocarbons. A longitudinal study was conducted with repeated measurements during spermatogenesis. Coke-oven workers (n=112) from a coke-oven plant served the PAH-exposed group, while administrators and security personnel (n=67) served the control. Routine semen parameters (concentration, motility, vitality, and morphology) were analyzed simultaneously; the assessment of sperm DNA integrity endpoints included DNA fragmentation, bulky DNA adducts, and 8-oxo-7,8-dihydro-2′-deoxyguanosine (8-oxo-dGuo). The degree of sperm DNA fragmentation was measured using the terminal deoxynucleotidyl transferase-mediated dUTP nick end-labeling (TUNEL) assay and sperm chromatin structure assay (SCSA). The PAH-exposed group had a significant increase in bulky DNA adducts and 8-oxo-dGuo compared to the control subjects (Ps = 0.002 and 0.045, respectively). Coke oven workers' percentages of DNA fragmentation and denaturation from the PAH-exposed group were not significantly different from those of the control subjects (Ps = 0.232 and 0.245, respectively). Routine semen parameters and DNA integrity endpoints were not correlated. Concentrations of 8-oxo-dGuo were positively correlated with percentages of DNA fragmentation measured by both TUNEL and SCSA (Ps = 0.045 and 0.034, respectively). However, the concentrations of 8-oxo-dGuo and percentages of DNA fragmentation did not correlate with concentrations of bulky DNA adducts. In summary, coke oven workers with chronic exposure to PAHs experienced decreased sperm DNA integrity. Oxidative stress could contribute to the degree of DNA fragmentation. Bulky DNA adducts may be independent of the formation of DNA fragmentation and oxidative adducts in sperm. Monitoring sperm DNA integrity is recommended as a part of the process of assessing the impact of occupational and environmental toxins on

  4. Formation of monomer residues in PS, PC, PA-6 and PVC upon {gamma}-irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Young Park, Gun [Graduate School of Biotechnology, Korea University, 1.5-Ka, Anam-Dong, Seongbuk-Ku, Seoul 136-701 (Korea, Republic of); Yong Cho, Seung [Functional Food Research Center, College of Life Sciences, Korea University, 1.5-Ka, Anam-Dong, Seongbuk-Ku, Seoul 136-701 (Korea, Republic of); Hoon Jeon, Dae [Graduate School of Biotechnology, Korea University, 1.5-Ka, Anam-Dong, Seongbuk-Ku, Seoul 136-701 (Korea, Republic of); Food Packaging Division, Korea Food and Drug Administration (KFDA), 5 Nokbun-Dong, Eunpyung-Ku, Seoul 122-704 (Korea, Republic of); Shin Kwak, In [Food Packaging Division, Korea Food and Drug Administration (KFDA), 5 Nokbun-Dong, Eunpyung-Ku, Seoul 122-704 (Korea, Republic of); Ho Lee, Kwang [Food Packaging Division, Korea Food and Drug Administration (KFDA), 5 Nokbun-Dong, Eunpyung-Ku, Seoul 122-704 (Korea, Republic of); Park, H.J. [Graduate School of Biotechnology, Korea University, 1.5-Ka, Anam-Dong, Seongbuk-Ku, Seoul 136-701 (Korea, Republic of) and Department of Packaging Science, Clemson University, Clemson, South Carolina 29634-0370 (United States)]. E-mail: hjpark@korea.ac.kr

    2006-09-15

    Food packaging polymers, polystyrene (PS), polycarbonate (PC), polyamide-6 (PA-6), and polyvinylchloride (PVC), were irradiated with dose in the range 5-200 kGy. The quantities of corresponding monomer residues (styrene monomer, bisphenol-A, {epsilon}-caprolactam, vinyl chloride) released from target materials were analyzed using a SIM mode of GC/MSD. Styrene monomer in PS showed a slight increase from 740 to 777 ppm at 5-30 kGy and then decreased as the dose increased from 30 to 200 kGy. Bisphenol-A in PC was dose independent at the low doses, 5, 10 and 30 kGy, but its level increased from 173 to 473 ppm at 30 kGy and thereafter remained unchanged through 200 kGy. {epsilon}-Caprolactam in PA-6 was also dose independent, in the range of 5-200 kGy, but its level (122-164 ppm) was found to be higher than those (71 ppm) of non-irradiated sample. As for PVC, the quantity of vinyl chloride tended to increase from 8 to 18 ppm at 5-200 kGy.

  5. ENVIRONMENTAL EXPOSURE TO VINYL CHLORIDE

    Directory of Open Access Journals (Sweden)

    Henryka Langauer-Lewowicka

    2010-09-01

    Full Text Available Vinyl chloride (VC monomer is a wellknown carcinogenic and mutagenic substance causes liver damages, angiosarcoma of the liver, acro – osteolysis, sclerodermalike changes in workers chronically exposed to this gas. There are following VC emitors to the environment: VC production plants, polymerization facilities and planes where polyvinyl products are fabricated. Because of that, the general population is coming into VC contact through polluted air, food and water. VC concentration in all mentioned sites is very low, often not detectable. There was found any health risk for the general population. The VC air concentration in the vicinity to antropogenic emitors is always higher. Such a situation may causes undesirable health effect for residents living in the neighbourhood. Epidemiological studies are performed to detect the adverse VC effect in selected cohorts. Non of the study did not confirmed cases of angiosarcoma among residents living near a vinyl chloride sites. VC production is growing permanently, so VC emission will be higher. Because of that health monitoring of general population and especially of selected groups seems to be necessary in the future.

  6. Hip adduction and abduction strength profiles in elite soccer players

    DEFF Research Database (Denmark)

    Serner, Andreas; Petersen, Jesper; Madsen, Thomas Moller

    2011-01-01

    An ipsilateral hip adduction/abduction strength ratio of more than 90%, and hip adduction strength equal to that of the contralateral side have been suggested to clinically represent adequate strength recovery of hip adduction strength in athletes after groin injury. However, to what extent side-......-to-side symmetry in isometric hip adduction and abduction strength can be assumed in soccer players remains uncertain....

  7. Hip adduction and abduction strength profiles in elite soccer players

    DEFF Research Database (Denmark)

    Thorborg, Kristian; Serner, Andreas; Petersen, Jesper

    2011-01-01

    An ipsilateral hip adduction/abduction strength ratio of more than 90%, and hip adduction strength equal to that of the contralateral side have been suggested to clinically represent adequate strength recovery of hip adduction strength in athletes after groin injury. However, to what extent side-......-to-side symmetry in isometric hip adduction and abduction strength can be assumed in soccer players remains uncertain....

  8. Softening and elution of monomers in ethanol

    DEFF Research Database (Denmark)

    Benetti, Ana Raquel; Asmussen, Erik; Munksgaard, E Christian;

    2009-01-01

    The purpose of this study was to investigate the effect of light-curing protocol on softening and elution of monomers in ethanol as measured on a model polymer. It was a further aim to correlate the measured values with previously reported data on degree of conversion and glass transition tempera...

  9. Producing monomers and polymers from plant oils

    Science.gov (United States)

    The integration of biobased industrial products into existing markets, where petrochemically-derived materials currently dominate, is a worthy objective. This chapter reviews some technologies that have been developed including olefins of various chain lengths, photo-curable polymers, vinyl monomers...

  10. 40 CFR 721.4590 - Mannich-based adduct.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Mannich-based adduct. 721.4590 Section... Substances § 721.4590 Mannich-based adduct. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance generically identified as a Mannich-based adduct (PMN P-93-66)...

  11. Release of monomers from composite dust.

    Science.gov (United States)

    Cokic, S M; Duca, R C; Godderis, L; Hoet, P H; Seo, J W; Van Meerbeek, B; Van Landuyt, K L

    2017-05-01

    Dental personnel are more at risk to develop asthmatic disease, but the exact reason is so far unknown. During abrasive procedures, dental personnel are exposed to nano-sized dust particles released from dental composite. The aim of this study was to investigate whether respirable composite dust may also release monomers. Respirable (composite dust was collected and the release of methacrylate monomers and Bisphenol A (BPA) in water and ethanol was evaluated by liquid chromatography/mass spectroscopy (LC-MS/MS). The dust was ultra-morphologically and chemically analyzed by transmission electron microscopy and energy-dispersive X-ray spectroscopy (TEM-EDS). LC-MS/MS analysis revealed that, irrespective of the type of composite, the respirable fraction of composite dust may release relatively high concentrations of unpolymerized methacrylate monomers, both in water and ethanol. Higher release was observed in ethanol. The endocrine disruptor BPA also emanated from the composite dust particles. TEM showed that most particles were nano-sized, although particle size ranged between 6nm and 5μm with a mode value between 12 and 39nm. Most particles consisted of several filler particles in resin matrix, although single nano-filler particles could also be observed. Elemental analysis by TEM-EDS proved that the particles collected on the filters originated from the dental composites. Theoretically, composite dust may function as a vehicle to transport monomers deeply into the respiratory system. The results of this study may shed another light on the increasing incidence of respiratory disease among dental personnel, and more care should be taken to prevent inhalation of composite dust. Special care should be taken to prevent inhalation of composite dust, as the dust particles may release methacrylate monomers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. New adducts of Lapachol with primary amines

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Mirelly D.F.; Litivack-Junior, Jose T.; Antunes, Roberto V.; Silva, Tania M.S.; Camara, Celso A., E-mail: ccelso@dq.ufrpe.b [Universidade Federal Rural de Pernambuco (UFRPE), Recife, PE (Brazil). Dept. de Quimica

    2011-07-01

    New adducts of lapachol with neat primary aliphatic amines were obtained in a solvent-free reaction in good to reasonable yields (52 to 88%), at room temperature. The new compounds containing a phenazine moiety were obtained from suitable functionalized aminoalkyl compounds, including ethanolamine, 3-propanolamine, 2-methoxy-ethylamine, 3-methoxy-propylamine, n-butylamine and 2-phenetylamine. (author)

  13. STUDY ON GMA-DNA ADDUCTS

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Objective. DNA modification fixed as mutations in the cells may be an essential factor in the initiation step of chemical carcinogenesis. In order to explore the mechanism of gene mutation and cell transformation induced by glycidyl methacrylate (GMA), the current test studied the characteristics of GMA-DNA adducts formation in vitro.Methods. In vitro test, dAMP, dCMP, dGMP, dTMP and calf thymus DNA were allowed to react with GMA (Glycidyl Methacrylate). After the reaction, the mixtures were detected by UV and subjected to reversed-phase HPLC on ultrasphere ODS reversed-phase column, the reaction products were eluted with a linear gradients of methanol (solvent A) and 10mmol/L ammonium formate, pH5.0 (solvent B). The synthesized adducts were then characterized by UV spectroscopy in acid (pH1.0), neutral (pH7.2), alkaline (pH11.0) and by mass spectroscopy.Results. The results showed that GMA could bind with dAMP, dCMP, dGMP and calf thymus DNA by covalent bond, and the binding sites were specific (N6 of adenine, N3 of cytosine). Meanwhile, a main GMA-DNA adduct in the reaction of GMA with calf thymus DNA was confirmed as N3-methacrylate-2-hydroxypropy1-dCMP.Conclusions. GMA can react with DNA and /or deoxynucleotide monophosphate and generate some adducts such as N6-methacrylate-2-hydroxypropyl-dAMP and N3-methacrylate-2-hydroxypropyl-dCMP, ets. Formation of GMA-DNA adducts is an important molecular event in gene mutation and cell transformation induced by GMA.

  14. Formation of Metal-Adducted Analyte Ions by Flame-Induced Atmospheric Pressure Chemical Ionization Mass Spectrometry.

    Science.gov (United States)

    Cheng, Sy-Chyi; Wang, Chin-Hsiung; Shiea, Jentaie

    2016-05-17

    A flame-induced atmospheric pressure chemical ionization (FAPCI) source, consisting of a miniflame, nebulizer, and heated tube, was developed to ionize analytes. The ionization was performed by reacting analytes with a charged species generated in a flame. A stainless steel needle deposited with saturated alkali chloride solution was introduced into the mini oxyacetylene flame to generate alkali ions, which were reacted with analytes (M) generated in a heated nebulizer. The alkali-adducted 18-crown-6 ether ions, including (M + Li)(+), (M + Na)(+), (M + K)(+), (M + Rb)(+), and (M + Cs)(+), were successfully detected on the FAPCI mass spectra when the corresponding alkali chloride solutions were separately introduced to the flame. When an alkali chloride mixture was introduced, all alkali-adducted analyte ions were simultaneously detected. Their intensity order was as follows: (M + Cs)(+) > (M + Rb)(+) > (M + K)(+) > (M + Na)(+) > (M + Li)(+), and this trend agreed with the lattice energies of alkali chlorides. Besides alkali ions, other transition metal ions such as Ni(+), Cu(+), and Ag(+) were generated in a flame for analyte ionization. Other than metal ions, the reactive species generated in the fossil fuel flame could also be used to ionize analytes, which formed protonated analyte ions (M + H)(+) in positive ion mode and deprotonated analyte ions (M - H)(-) in negative ion mode.

  15. Photokopolimerisasi monomer akrilat degan kulit kras sapi

    Directory of Open Access Journals (Sweden)

    Dwi Wahini Nurhajati

    1997-06-01

    Full Text Available The research on photocopolymerization of acrylate monomer with cow crust hide had object to observe the resulted copolymer onto cow crust hide. Crust hides, saturated with aqueous emulsions containing 25 wt % of n-butyl acrylate (n-BA or tripropylene glycol diacrylate (TPGDA were irradiated by cobalt – 60 gamma rays with doses ranges from 5 to 25 kGy. The irradiated hides were washed with water, dried in air and extracted in soxhlet apparatus for 48 hours to remove homopolymer. The highest yield of photocopolymerization of n – butyl acrylate monomer with crust hides was found 17,7878% at dose 25 kGy, and for photocopolymerization of tripropylene glycol diacrylate with crust hides was found 39,4245% at dose 20 kGy.

  16. Functionalization of nanodiamond with epoxy monomer

    Institute of Scientific and Technical Information of China (English)

    Huan Huan Zhang; Ya Ting Liu; Rong Wang; Xiao Yan Yu; Xiong Wei Qu; Qing Xin Zhang

    2011-01-01

    A novel nanodiamond-epoxy derivative (ND-EP) was synthesized by grafting epoxy monomers onto the surface of nanodiamond (ND), and characterized by FTIR and TGA. The ratio of grafted epoxy groups was determined to be 32.5 wt% by TGA. The developed methodology provides an efficient method for the functionalization of nanodiamond material, which enables a variety of advanced engineering and biomedical applications of ND.

  17. RADICAL POLYMERIZATION OF N, N-DI(2-2 '-METHYL-ACRYLOYLOXY-PROPYL) -PARA-TOLUIDINE FUNCTIONAL MONOMER

    Institute of Scientific and Technical Information of China (English)

    QIU Kunyuan; FU Jie

    1989-01-01

    Functional monomer ( MP )2PT having tertiary aromatic amino group was systhesized from the reaction of N, N-di ( 2 -hydroxypropyl )-p-toluidine with 2-methyl acryloyl chloride. In the presence of organic peroxide, the radical polymerization of ( MP )2PT in toluene took place. The kinetics of ( MP )2PT polymerization and the ESR spectra ofLPO-( MP )2PT-MNP systems were determined respectively.

  18. Acetaldehyde Adducts in Alcoholic Liver Disease

    Directory of Open Access Journals (Sweden)

    Mashiko Setshedi

    2010-01-01

    Full Text Available Chronic alcohol abuse causes liver disease that progresses from simple steatosis through stages of steatohepatitis, fibrosis, cirrhosis, and eventually hepatic failure. In addition, chronic alcoholic liver disease (ALD, with or without cirrhosis, increases risk for hepatocellular carcinoma (HCC. Acetaldehyde, a major toxic metabolite, is one of the principal culprits mediating fibrogenic and mutagenic effects of alcohol in the liver. Mechanistically, acetaldehyde promotes adduct formation, leading to functional impairments of key proteins, including enzymes, as well as DNA damage, which promotes mutagenesis. Why certain individuals who heavily abuse alcohol, develop HCC (7.2–15% versus cirrhosis (15–20% is not known, but genetics and co-existing viral infection are considered pathogenic factors. Moreover, adverse effects of acetaldehyde on the cardiovascular and hematologic systems leading to ischemia, heart failure, and coagulation disorders, can exacerbate hepatic injury and increase risk for liver failure. Herein, we review the role of acetaldehyde adducts in the pathogenesis of chronic ALD and HCC.

  19. Electrochemical synthesis and characterization of chloride doped polyaniline

    Indian Academy of Sciences (India)

    A M Pharhad Hussain; A Kumar

    2003-04-01

    Chloride doped polyaniline conducting polymer films have been prepared in a protic acid medium (HCl) by potentiodynamic method in an electrochemical cell and studied by cyclic voltammetry and FTIR techniques. The FTIR spectra confirmed Cl– ion doping in the polymers. The polymerization rate was found to increase with increasing concentration of aniline monomer. But the films obtained at high monomer concentration were rough having a nonuniform flaky polyaniline distribution. Results showed that the polymerization rate did not increase beyond a critical HCl concentration. Cyclic voltammetry suggested that, the oxidation-reduction current increased with an increase in scan rate and that the undoped polyaniline films were not hygroscopic whereas chloride doped polyaniline films were found to be highly hygroscopic.

  20. 21 CFR 888.4220 - Cement monomer vapor evacuator.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cement monomer vapor evacuator. 888.4220 Section... (CONTINUED) MEDICAL DEVICES ORTHOPEDIC DEVICES Surgical Devices § 888.4220 Cement monomer vapor evacuator. (a) Identification. A cement monomer vapor evacuator is a device intended for use during surgery to contain or...

  1. Kinetics of monomer biodegradation in soil.

    Science.gov (United States)

    Siotto, Michela; Sezenna, Elena; Saponaro, Sabrina; Innocenti, Francesco Degli; Tosin, Maurizio; Bonomo, Luca; Mezzanotte, Valeria

    2012-01-01

    In modern intensive agriculture, plastics are used in several applications (i.e. mulch films, drip irrigation tubes, string, clips, pots, etc.). Interest towards applying biodegradable plastics to replace the conventional plastics is promising. Ten monomers, which can be applied in the synthesis of potentially biodegradable polyesters, were tested according to ASTM 5988-96 (standard respirometric test to evaluate aerobic biodegradation in soil by measuring the carbon dioxide evolution): adipic acid, azelaic acid, 1,4-butanediol, 1,2-ethanediol, 1,6-hexanediol, lactic acid, glucose, sebacic acid, succinic acid and terephthalic acid. Eight replicates were carried out for each monomer for 27-45 days. The numerical code AQUASIM was applied to process the CO₂ experimental data in order to estimate values for the parameters describing the different mechanisms occurring to the monomers in soil: i) the first order solubilization kinetic constant, K(sol) (d⁻¹); ii) the first order biodegradation kinetic constant, K(b) (d⁻¹); iii) the lag time in biodegradation, t(lag) (d); and iv) the carbon fraction biodegraded but not transformed into CO₂, Y (-). The following range of values were obtained: [0.006 d⁻¹, 6.9 d⁻¹] for K(sol), [0.1 d⁻¹, 1.2 d⁻¹] for K(b), and [0.32-0.58] for Y; t(lag) was observed for azelaic acid, 1,2-ethanediol, and terephthalic acid, with estimated values between 3.0 e 4.9 d. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Studies on Ion-molecule Reaction of Disubstituted Benzene with IonSystem of Acetyl Chloride in Gas Phase

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The ion-molecule reactions of disubstituted benzenes with the ion system of acetyl chloride under the chemical ionization condition were examined and the fragmentation reactions of the adduct ions formed by the ion-molecule reactions were studied by using collision-induced dissocia tion technique. It was found that the electron-releasing groups favored the adduct reactions and the electron-withdrawing groups did not. The position and properties of substituting groups had an effect on the relative abundance of the adduct ions. The fragmentation reaction of the adduct ions formed by ortho-benzene diamine with the acetyl ion was similar to the reductive alkylation reaction of amine in condensed phase.

  3. Static and dynamical critical behavior of the monomer-monomer reaction model with desorption

    Science.gov (United States)

    da Costa, E. C.; Rusch, Flávio Roberto

    2016-06-01

    We studied in this work the monomer-monomer reaction model on a linear chain. The model is described by the following reaction: A + B → AB, where A and B are two monomers that arrive at the surface with probabilities yA and yB, respectively, and we have considered desorption of the monomer B with probability α. The model is studied in the adsorption controlled limit where the reaction rate is infinitely larger than the adsorption rate. We employ site and pair mean-field approximations as well as static and dynamical Monte Carlo simulations. We show that the model exhibits a continuous phase transition between an active steady state and an A-absorbing state, when the parameter yA is varied through a critical value, which depends on the value of α. Monte Carlo simulations and finite-size scaling analysis near the critical point are used to determine the static critical exponents β and ν⊥ and the dynamical critical exponents ν∥ and z. The results found for the monomer-monomer reaction model with B desorption, in the linear chain, are different from those found by E. V. Albano (Albano, 1992) and are in accordance with the values obtained by Jun Zhuo and Sidney Redner (Zhuo and Redner, 1993), and endorse the conjecture of Grassberger, which states that any system undergoing a continuous phase transition from an active steady state to a single absorbing state, exhibits the same critical behavior of the directed percolation universality class.

  4. Formation of 7-(2-oxoethyl) guanine from lipid peroxidation and vinyl chloride exposure in male sprague dawley rats.

    Science.gov (United States)

    With a development of a new sensitive LC-MS/MS method to analyze 7-(2-oxoethylguanine) (7OEG), we confirmed and differentiated 7-0EG DNA adduct formation endogenously from lipid peroxidation and exogenously from Vinyl Chloride (VC) exposure. VC is an industrial chemical that is ...

  5. Prolonged Acetaminophen-Protein Adduct Elimination During Renal Failure, Lack of Adduct Removal by Hemodiafiltration, and Urinary Adduct Concentrations After Acetaminophen Overdose.

    Science.gov (United States)

    Curry, Steven C; Padilla-Jones, Angela; O'Connor, Ayrn D; Ruha, Anne-Michelle; Bikin, Dale S; Wilkins, Diana G; Rollins, Douglas E; Slawson, Matthew H; Gerkin, Richard D

    2015-06-01

    Elevated concentrations of serum acetaminophen-protein adducts, measured as protein-derived acetaminophen-cysteine (APAP-CYS), have been used to support a diagnosis of APAP-induced liver injury when histories and APAP levels are unhelpful. Adducts have been reported to undergo first-order elimination, with a terminal half-life of about 1.6 days. We wondered whether renal failure would affect APAP-CYS elimination half-life and whether continuous venovenous hemodiafiltration (CVVHDF), commonly used in liver failure patients, would remove adducts to lower their serum concentrations. Terminal elimination half-lives of serum APAP-CYS were compared between subjects with and without renal failure in a prospective cohort study of 168 adults who had ingested excessive doses of APAP. APAP-CYS concentrations were measured in plasma ultrafiltrate during CVVHDF at times of elevated serum adduct concentrations. Paired samples of urine and serum APAP-CYS concentrations were examined to help understand the potential importance of urinary elimination of serum adducts. APAP-CYS elimination half-life was longer in 15 renal failure subjects than in 28 subjects with normal renal function (41.3 ± 2.2 h versus 26.8 ± 1.1 h [mean ± SEM], respectively, p adduct elimination, and consideration of prolonged elimination needs to be considered if attempting back-extrapolation of adduct concentrations. CVVHDF did not remove detectable APAP-CYS, suggesting approximate APAP-protein adduct molecular weights ≥ 50,000 Da. The presence of urinary APAP-CYS in the minority of instances was most compatible with renal adduct production and protein shedding into urine rather than elimination of serum adducts.

  6. Organocatalytic Removal of Formaldehyde Adducts from RNA and DNA Bases

    OpenAIRE

    2015-01-01

    Formaldehyde is universally employed to fix tissue specimens, where it forms hemiaminal and aminal adducts with biomolecules, hindering the ability to retrieve molecular information. Common methods for removing these adducts involve extended heating, which can cause extensive degradation of nucleic acids, particularly RNA. Here we show that water-soluble bifunctional catalysts (anthranilates and phosphanilates) speed the reversal of formaldehyde adducts of mononucleotides over standard buffer...

  7. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    Prediction of chloride ingress into concrete is an important part of durability design of reinforced concrete structures exposed to chloride containing environment. This paper presents experimentally based design parameters for Portland cement concretes with and without silica fume and fly ash...... in marine atmospheric and submersed South Scandinavian environment. The design parameters are based on sequential measurements of 86 chloride profiles taken over ten years from 13 different types of concrete. The design parameters provide the input for an analytical model for chloride profiles as function...

  8. A monomer is the minimum functional unit required for channel and ATPase activity of the cystic fibrosis transmembrane conductance regulator.

    Science.gov (United States)

    Ramjeesingh, M; Li, C; Kogan, I; Wang, Y; Huan, L J; Bear, C E

    2001-09-04

    The cystic fibrosis transmembrane conductance regulator (CFTR) normally functions as a phosphorylation-regulated chloride channel on the apical surface of epithelial cells, and lack of this function is the primary cause for the fatal disease cystic fibrosis (CF). Previous studies showed that purified, reconstituted CFTR can function as a chloride channel and, further, that its intrinsic ATPase activity is required to regulate opening and closing of the channel gate. However, these previous studies did not identify the quaternary structure required to mediate conduction and catalysis. Our present studies show that CFTR molecules may self-associate in CHO and Sf9 membranes, as complexes close to the predicted size of CFTR dimers can be captured by chemical cross-linking reagents and detected using nondissociative PAGE. However, CFTR function does not require a multimeric complex for function as we determined that purified, reconstituted CFTR monomers are sufficient to mediate regulated chloride conduction and ATPase activity.

  9. Synthesis and characterization of the 1.1 adducts of copper(I) halides with bidentate N,N′-bis(benzophenone)-1,2-diiminoethane Schiff base: Crystal structures of [Cu(bz2en)2][CuX2] (X = Br, I) complexes

    NARCIS (Netherlands)

    Kia, Reza; Mirkhani, Valiollah; Harkema, Sybolt; Hummel, van Gerrit J.

    2007-01-01

    1:1 adducts of N,N′-bis(benzophenone)-1,2-diiminoethane (bz2en) with copper(I) chloride, bromide and iodide, [Cu(bz2en)2][CuX2] (X = Cl, Br, and I), have been synthesized and the structures of the solid bromide and iodide adducts were determined by X-ray crystallography from single-crystal data. The

  10. Copolymerization of Carbon–carbon Double-bond Monomer (Styrene with Cyclic Monomer (Tetrahydrofuran

    Directory of Open Access Journals (Sweden)

    Sari Fouad

    2012-12-01

    Full Text Available We reported in this work that the cationic copolymerization in one step takes place between carbon–carbon double-bond monomer styrene with cyclic monomer tetrahydrofuran. The comonomers studied belong to different families: vinylic and cyclic ether. The reaction is initiated with maghnite-H+ an acid exchanged montmorillonite as acid solid ecocatalyst. Maghnite-H+ is already used as catalyst for polymerization of many vinylic and heterocyclic monomers. The oxonium ion of tetrahydrofuran and carbonium ion of styrene propagated the reaction of copolymerization. The acetic anhydride is essential for the maintenance of the ring opening of tetrahydrofuran and the entry in copolymerization. The temperature was kept constant at 40°C in oil bath heating for 6 hours. A typical reaction product was analyzed by 1H-NMR, 13C-NMR and IR and the formation of the copolymer was confirmed. The reaction was proved by matched with analysis. The maghnite-H+ allowed us to obtain extremely pure copolymer in good yield by following a simples operational conditions. Copyright © 2012 by BCREC UNDIP. All rights reservedReceived: 29th October 2012; Revised: 29th November 2012; Accepted: 29th November 2012[How to Cite: S. Fouad, M.I. Ferrahi, M. Belbachir. (2012. Copolymerization of Carbon–carbon Double-bond Monomer (Styrene with Cyclic Monomer (Tetrahydrofuran. Bulletin of Chemical Reaction Engineering & Catalysis, 7(2: 165-171. (doi:10.9767/bcrec.7.2.4074.165-171][How to Link / DOI: http://dx.doi.org/10.9767/bcrec.7.2.4074.165-171 ] | View in 

  11. Conversion of chlorinated waste streams from the production of polyvinyl chloride over La-based catalysts

    NARCIS (Netherlands)

    van der Heijden, A.W.A.M.

    2008-01-01

    Annually, more than one third of all chlorine consumption is used for the production of C2H3Cl. This is the monomer for the production of polyvinyl chloride (PVC). Even though the production process of C2H3Cl is rather selective, by-products are formed in large amounts due to the large scale of the

  12. New insight into the formation of structural defects in poly(vinyl chloride)

    NARCIS (Netherlands)

    Purmova, J; Pauwels, KFD; van Zoelen, W; Vorenkamp, EJ; Schouten, AJ; Coote, ML; Pauwels, Kim F.D.; Coote, Michelle L.

    2005-01-01

    The monomer conversion dependence of the formation of the various types of defect structures in radical suspension polymerization of vinyl chloride was examined via both H-1 and C-13 NMR spectrometry. The rate coefficients for model propagation and intra- and intermolecular hydrogen abstraction reac

  13. A liquid-crystalline hexa-adduct of [60]fullerene

    OpenAIRE

    Chuard, Thierry; Deschenaux, Robert; Hirsch, Andreas; Schönberger, Hubert

    2006-01-01

    A hexa-adduct of [60]fullerene was synthesized by addition of a mesomorphic twin cyanobiphenyl malonate derivative to C60; whereas the malonate derivative gave a monotropic nematic phase, the fullerene hexa-adduct showed an enantiotropic smectic A phase.

  14. Synthesis and Photophysical Properties of C60-carbazole Adducts

    Institute of Scientific and Technical Information of China (English)

    YIN ,Gui(尹桂); YIN,Gui; MAO,Xin-Ping(毛新平); MAO,Xin-Ping; SUO,Zhi-Yong(锁志勇); SUO,Zhi-Yong; XU,Zheng(徐正); XU,Zheng

    2001-01-01

    Three C60-cartazole adducts have been synthesized by 1,3-dipolar cycloaddition reaction.Intramolecular energy/electron transfer from carbazole to C60 was observed by steady-state absorption and fluorescence spectra.The fluorescence spectra of these adducts were similau to each other and dependent on the excitation wavelength and solvent.

  15. 18. Adduct detection in human monitoring for carcinogen exposure

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@Determination of the covalently bound products (adducts) of carcinogens with DNA or proteins may be used for the monitoring of exposure to these compounds. Protein adducts are generally stable and are not enzymatically repaired, and the use of these for cxposure monitoring is normally carried out with globin or albumin, because

  16. The antimicrobial activities of the cinnamaldehyde adducts with amino acids.

    Science.gov (United States)

    Wei, Qing-Yi; Xiong, Jia-Jun; Jiang, Hong; Zhang, Chao; Wen Ye

    2011-11-01

    Cinnamaldehyde is a well-established natural antimicrobial compound. It is probable for cinnamaldehyde to react with amino acid forming Schiff base adduct in real food system. In this paper, 9 such kind of adducts were prepared by the direct reaction of amino acids with cinnamaldehyde at room temperature. Their antimicrobial activities against Bacillus subtilis, Escherichia coli and Saccharomyces cerevisiae were evaluated with benzoic acid as a reference. The adducts showed a dose-dependent activities against the three microbial strains. Both cinnamaldehyde and their adducts were more active against B. subtilis than on E. coli, and their antimicrobial activities were higher at lower pH. Both cinnamaldehyde and its adducts were more active than benzoic acid at the same conditions. The adduct compound A was non-toxic by primary oral acute toxicity study in mice. However, in situ effect of the adduct compound A against E. coli was a little lower than cinnamaldehyde in fish meat. This paper for the first time showed that the cinnamaldehyde adducts with amino acids had similar strong antimicrobial activities as cinnamaldehyde, which may provide alternatives to cinnamaldehyde in food to avoid the strong unacceptable odor of cinnamaldehyde.

  17. Fluorescence of Phytochrome Adducts with Synthetic Locked Chromophores*

    Science.gov (United States)

    Zienicke, Benjamin; Chen, Li-Yi; Khawn, Htoi; Hammam, Mostafa A. S.; Kinoshita, Hideki; Reichert, Johannes; Ulrich, Anne S.; Inomata, Katsuhiko; Lamparter, Tilman

    2011-01-01

    We performed steady state fluorescence measurements with phytochromes Agp1 and Agp2 of Agrobacterium tumefaciens and three mutants in which photoconversion is inhibited. These proteins were assembled with the natural chromophore biliverdin (BV), with phycoerythrobilin (PEB), which lacks a double bond in the ring C-D-connecting methine bridge, and with synthetic bilin derivatives in which the ring C-D-connecting methine bridge is locked. All PEB and locked chromophore adducts are photoinactive. According to fluorescence quantum yields, the adducts may be divided into four different groups: wild type BV adducts exhibiting a weak fluorescence, mutant BV adducts with about 10-fold enhanced fluorescence, adducts with locked chromophores in which the fluorescence quantum yields are around 0.02, and PEB adducts with a high quantum yield of around 0.5. Thus, the strong fluorescence of the PEB adducts is not reached by the locked chromophore adducts, although the photoconversion energy dissipation pathway is blocked. We therefore suggest that ring D of the bilin chromophore, which contributes to the extended π-electron system of the locked chromophores, provides an energy dissipation pathway that is independent on photoconversion. PMID:21071442

  18. Fluorescence of phytochrome adducts with synthetic locked chromophores.

    Science.gov (United States)

    Zienicke, Benjamin; Chen, Li-Yi; Khawn, Htoi; Hammam, Mostafa A S; Kinoshita, Hideki; Reichert, Johannes; Ulrich, Anne S; Inomata, Katsuhiko; Lamparter, Tilman

    2011-01-14

    We performed steady state fluorescence measurements with phytochromes Agp1 and Agp2 of Agrobacterium tumefaciens and three mutants in which photoconversion is inhibited. These proteins were assembled with the natural chromophore biliverdin (BV), with phycoerythrobilin (PEB), which lacks a double bond in the ring C-D-connecting methine bridge, and with synthetic bilin derivatives in which the ring C-D-connecting methine bridge is locked. All PEB and locked chromophore adducts are photoinactive. According to fluorescence quantum yields, the adducts may be divided into four different groups: wild type BV adducts exhibiting a weak fluorescence, mutant BV adducts with about 10-fold enhanced fluorescence, adducts with locked chromophores in which the fluorescence quantum yields are around 0.02, and PEB adducts with a high quantum yield of around 0.5. Thus, the strong fluorescence of the PEB adducts is not reached by the locked chromophore adducts, although the photoconversion energy dissipation pathway is blocked. We therefore suggest that ring D of the bilin chromophore, which contributes to the extended π-electron system of the locked chromophores, provides an energy dissipation pathway that is independent on photoconversion.

  19. Synthesis and photoactivity of phenylazonaphthalene peptide nucleic acid monomers

    Institute of Scientific and Technical Information of China (English)

    Jin Du Li; Miao Chen; Sheng Liu; Hao Bo Zhang; Zhi Lu Liu

    2008-01-01

    Phenylazonaphthalene peptide nucleic acid (PNA) monomers were successfully synthesized,and their photoisomerization was examined.The new PNA monomers showed reversible trans-cis isomerization with UV and visible light irradiation,which might be the foundation of photo-regulating the hybridization between PNA containing phenylazonaphthalene unit and DNA.Simultaneously,the fluorescence of the new PNA monomers might make them especially useful as structural probes.

  20. The practice of using Phenol inhibitors in obtaining monomers

    Energy Technology Data Exchange (ETDEWEB)

    Kurbatov, V.A.; Kirpichnikov, P.A.; Likumovich, A.G.

    1983-01-01

    Phenol antioxidants are promising stabilizers for the industrial production of monomers. Their potential may be considerably improved by searching for optimum compositions and conditions of application.

  1. Can the hydrophilicity of functional monomers affect chemical interaction?

    Science.gov (United States)

    Feitosa, V P; Ogliari, F A; Van Meerbeek, B; Watson, T F; Yoshihara, K; Ogliari, A O; Sinhoreti, M A; Correr, A B; Cama, G; Sauro, S

    2014-02-01

    The number of carbon atoms and/or ester/polyether groups in spacer chains may influence the interaction of functional monomers with calcium and dentin. The present study assessed the chemical interaction and bond strength of 5 standard-synthesized phosphoric-acid ester functional monomers with different spacer chain characteristics, by atomic absorption spectroscopy (AAS), ATR-FTIR, thin-film x-ray diffraction (TF-XRD), scanning electron microscopy (SEM), and microtensile bond strength (μTBS). The tested functional monomers were 2-MEP (two-carbon spacer chain), 10-MDP (10-carbon), 12-MDDP (12-carbon), MTEP (more hydrophilic polyether spacer chain), and CAP-P (intermediate hydrophilicity ester spacer). The intensity of monomer-calcium salt formation measured by AAS differed in the order of 12-MDDP=10-MDP>CAP-P>MTEP>2-MEP. FTIR and SEM analyses of monomer-treated dentin surfaces showed resistance to rinsing for all monomer-dentin bonds, except with 2-MEP. TF-XRD confirmed the weaker interaction of 2-MEP. Highest µTBS was observed for 12-MDDP and 10-MDP. A shorter spacer chain (2-MEP) of phosphate functional monomers induced formation of unstable monomer-calcium salts, and lower chemical interaction and dentin bond strength. The presence of ester or ether groups within longer spacer carbon chains (CAP-P and MTEP) may affect the hydrophilicity, μTBS, and also the formation of monomer-calcium salts.

  2. Interference of functional monomers with polymerization efficiency of adhesives.

    Science.gov (United States)

    Hanabusa, Masao; Yoshihara, Kumiko; Yoshida, Yasuhiro; Okihara, Takumi; Yamamoto, Takatsugu; Momoi, Yasuko; Van Meerbeek, Bart

    2016-04-01

    The degree of conversion (DC) of camphorquinone/amine-based adhesives is affected by acidic functional monomers as a result of inactivation of the amine co-initiator through an acid-base reaction. During bonding, functional monomers of self-etch adhesives chemically interact with hydroxyapatite (HAp). Here, we tested in how far the latter interaction of functional monomers with HAp counteracts the expected reduction in DC of camphorquinone/amine-based adhesives. The DC of three experimental adhesive formulations, containing either of the two functional monomers [10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) or 4-methacryloxyethyl trimellitic acid anhydride (4-META)] or no functional monomer (no-FM; control), was measured with and without HAp powder added to the adhesive formulations. Both the variables 'functional monomer' and 'HAp' were found to be significant, with the functional monomer reducing the DC and HAp counteracting this effect. It is concluded that the functional monomers 10-MDP and 4-META interfere with the polymerization efficiency of adhesives. This interference is less prominent in the presence of HAp, which would clinically correspond to when these two functional monomers of the adhesive simultaneously interact with HAp in tooth tissue.

  3. Diet-related DNA adduct formation in relation to carcinogenesis.

    Science.gov (United States)

    Hemeryck, Lieselot Y; Vanhaecke, Lynn

    2016-08-01

    The human diet contributes significantly to the initiation and promotion of carcinogenesis. It has become clear that the human diet contains several groups of natural foodborne chemicals that are at least in part responsible for the genotoxic, mutagenic, and carcinogenic potential of certain foodstuffs. Electrophilic chemicals are prone to attack nucleophilic sites in DNA, resulting in the formation of altered nucleobases, also known as DNA adducts. Since DNA adduct formation is believed to signal the onset of chemically induced carcinogenesis, the DNA adduct-inducing potential of certain foodstuffs has been investigated to gain more insight into diet-related pathways of carcinogenesis. Many studies have investigated diet-related DNA adduct formation. This review summarizes work on known or suspected dietary carcinogens and the role of DNA adduct formation in hypothesized carcinogenesis pathways.

  4. Understanding the Role of Dispersion in Frustrated Lewis Pairs and Classical Lewis Adducts: A Domain-Based Local Pair Natural Orbital Coupled Cluster Study.

    Science.gov (United States)

    Bistoni, Giovanni; Auer, Alexander A; Neese, Frank

    2017-01-18

    The interaction of Lewis acids and bases in both classical Lewis adducts and frustrated Lewis pairs (FLPs) is investigated to elucidate the role that London dispersion plays in different situations. The analysis comprises 14 different adducts between tris(pentafluorophenyl)borane and a series of phosphines, carbenes, and amines with various substituents, differing in both steric and electronic properties. The domain-based local pair natural orbital coupled-cluster (DLPNO-CCSD(T)) method is used in conjunction with the recently introduced local energy decomposition (LED) analysis to obtain state-of-the-art dissociation energies and, at the same time, a clear-cut definition of the London dispersion component of the interaction, with the ultimate goal of aiding in the development of designing principles for acid/base pairs with well-defined bonding features and reactivity. In agreement with previous DFT investigations, it is found that the London dispersion dominates the interaction energy in FLPs, and is also remarkably strong in Lewis adducts. In these latter systems, its magnitude can be easily modulated by modifying the polarizability of the substituents on the basic center, which is consistent with the recently introduced concept of dispersion energy donors. By counteracting the destabilizing energy contribution associated with the deformation of the monomers, the London dispersion drives the stability of many Lewis adducts. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Specific adducts formed through a radical reaction between peptides and contact allergenic hydroperoxides.

    Science.gov (United States)

    Redeby, Theres; Nilsson, Ulrika; Altamore, Timothy M; Ilag, Leopold; Ambrosi, Annalisa; Broo, Kerstin; Börje, Anna; Karlberg, Ann-Therese

    2010-01-01

    The first step in the development of contact allergy (allergic contact dermatitis) includes the penetration of an allergy-causing chemical (hapten) into the skin, where it binds to macromolecules such as proteins. The protein-hapten adduct is then recognized by the immune system as foreign to the body. For hydroperoxides, no relevant hapten target proteins or protein-hapten adducts have so far been identified. In this work, bovine insulin and human angiotensin I were used as model peptides to investigate the haptenation mechanism of three hydroperoxide haptens: (5R)-5-isopropenyl-2-methyl-2-cyclohexene-1-hydroperoxide (Lim-2-OOH), cumene hydroperoxide (CumOOH), and 1-(1-hydroperoxy-1-methylethyl) cyclohexene (CycHexOOH). These hydroperoxides are expected to react via a radical mechanism, for which 5,10,15,20-tetraphenyl-21H,23H-porphine iron(III) chloride (Fe(III)TPPCl) was used as a radical initiator. The reactions were carried out in 1:1 ethanol/10 mM ammonium acetate buffer pH 7.4, for 3 h at 37 degrees C, and the reaction products were either enzymatically digested or analyzed directly by MALDI/TOF-MS, HPLC/MS/MS, and 2D gel electrophoresis. Both hydroperoxide-specific and unspecific reaction products were detected, but only in the presence of the iron catalyst. In the absence of catalyst, the hydroperoxides remained unreacted. This suggests that the hydroperoxides can enter into the skin and remain inert until activated. Through the detection of a Lim-2-OOH adduct bound at the first histidine (of two) of angiotensin I, it was confirmed that hydroperoxides have the potential to form specific antigens in contact allergy.

  6. Synthesis, spectroscopic and thermal studies of the copper(II) aspartame chloride complex

    Science.gov (United States)

    Çakır, S.; Coşkun, E.; Naumov, P.; Biçer, E.; Bulut, İ.; İçbudak, H.; Çakır, O.

    2002-08-01

    Aspartame adduct of copper(II) chloride Cu(Asp) 2Cl 2·2H 2O (Asp=aspartame) is synthesized and characterized by elemental analysis, FT IR, UV/vis, ESR spectroscopies, TG, DTG, DTA measurements and molecular mechanics calculations. Aqueous solution of the green solid absorbs strongly at 774 and 367 nm. According to the FT IR spectra, the aspartame moiety coordinates to the copper(II) ion via its carboxylate ends, whereas the ammonium terminal groups give rise to hydrogen bonding network with the water, the chloride ions or neighboring carboxylate groups. The results suggest tetragonally distorted octahedral environment of the copper ions.

  7. A review of the developments of multi-purpose primers and adhesives comprising novel dithiooctanoate monomers and phosphonic acid monomers.

    Science.gov (United States)

    Ikemura, Kunio; Endo, Takeshi; Kadoma, Yoshinori

    2012-02-03

    This paper reviews the developments of dithiooctanoate monomers and acidic adhesive monomers, and their roles in multi-purpose primers and adhesives in promoting adhesion to multiple substrate materials. Novel dithiooctanoate monomers exhibited excellent bonding to precious metals and alloys when compared against conventional sulfur-containing monomers. Newly developed phosphonic acid monomers, endowed with a water-soluble nature, enabled sufficient demineralization of dental hard tissues and thus improved bonding to both ground enamel and dentin. The optimal combination for bonding to dental hard tissues and precious and non-precious metals and alloys was 5.0 wt% 10-methacryloyloxydecyl 6,8-dithiooctanoate (10-MDDT) and 1.0 wt% 6-methacryloyloxyhexyl phosphonoacetate (6-MHPA). For bonding to dental porcelain, alumina, zirconia, and gold (Au) alloy, a ternary combination of silane coupling agent, acidic adhesive monomers, and dithiooctanoate monomers seemed promising. The latest development was a single-bottle, multi-purpose, self-etching adhesive which contained only acidic adhesive monomers and dithiooctanoate monomers but which produced strong adhesion to ground enamel and dentin, sandblasted zirconia, and Au alloy.

  8. The knee adduction moment during gait is associated with the adduction angle measured during computer-assisted total knee arthroplasty.

    Science.gov (United States)

    Roda, Richard D; Wilson, Janie L Astephen; Wilson, David A J; Richardson, Glen; Dunbar, Michael J

    2012-06-01

    Computer-assisted surgery can be used to measure 3-dimensional knee function during arthroplasty surgery; however, it is unknown if the movement of the knee measured during surgery is related to the in vitro, dynamic state of the knee joint, specifically the knee adduction moment during gait, which has been related to implant migration. The purpose of this study was to determine if the preoperative adduction moment is correlated with the knee abduction/adduction angle measured intraoperatively. A statistically significant correlation was found between the mean (r(2) = 0.59; P = .001) and peak (r(2) = 0.53; P = .003) preoperative knee adduction moment and the mean abduction/adduction angle measured intraoperatively. The association found in this study suggests the potential for incorporating functional information that relates to surgical outcome into surgical decision making using computer-assisted surgery.

  9. Lithium Sulfuryl Chloride Battery.

    Science.gov (United States)

    Primary batteries , Electrochemistry, Ionic current, Electrolytes, Cathodes(Electrolytic cell), Anodes(Electrolytic cell), Thionyl chloride ...Phosphorus compounds, Electrical conductivity, Calibration, Solutions(Mixtures), Electrical resistance, Performance tests, Solvents, Lithium compounds

  10. Synthesis and thermal behavior of polyacrylonitrile/vinylidene chloride copolymer

    Directory of Open Access Journals (Sweden)

    Robson Fleming

    2014-06-01

    Full Text Available Polyacrylonitrile fiber encompasses a broad range of products based on acrylonitrile (AN which is readily copolymerized with a wide range of ethylenic unsaturated monomers giving rise to polymers with different characteristics and applications. Such products can be designed for cost-effective, flame and heat resistant solutions for the textile industry, aircraft and automotive markets. In the present work acrylonitrile was copolymerized with vinylidene chloride (VDC by conventional suspension polymerization process via redox system, with an initial content of 10%/mass of the VDC monomer. The copolymer average molecular weight was obtained by Gel Permeation Chromatography (GPC and by intrinsic viscosity analysis. To control the polymerization process continuously, qualitative and quantitative analysis of the chloride content in the PAN AN/VDC copolymer structure was accomplished by using X-ray fluorescence and potentiometric titration techniques. A good correlation was found between these two techniques, leading to a straightforward verification of VDC in the polymer structure. The thermal behavior of PAN AN/VDC copolymer was performed by Differential Scanning Calorimetry (DSC and Thermogravimetric Analysis (TGA. The results showed that VDC monomers exhibited a nearly stoichiometric reaction with acrylonitrile, copolymerizing about 90% of its initial mass. VDC changed significantly the polyacrylonitrile thermal behavior, decreasing the polymer degradation temperature by about 40-50°C.

  11. Glottal Adduction and Subglottal Pressure in Singing.

    Science.gov (United States)

    Herbst, Christian T; Hess, Markus; Müller, Frank; Švec, Jan G; Sundberg, Johan

    2015-07-01

    Previous research suggests that independent variation of vocal loudness and glottal configuration (type and degree of vocal fold adduction) does not occur in untrained speech production. This study investigated whether these factors can be varied independently in trained singing and how subglottal pressure is related to average glottal airflow, voice source properties, and sound level under these conditions. A classically trained baritone produced sustained phonations on the endoscopic vowel [i:] at pitch D4 (approximately 294 Hz), exclusively varying either (a) vocal register; (b) phonation type (from "breathy" to "pressed" via cartilaginous adduction); or (c) vocal loudness, while keeping the others constant. Phonation was documented by simultaneous recording of videokymographic, electroglottographic, airflow and voice source data, and by percutaneous measurement of relative subglottal pressure. Register shifts were clearly marked in the electroglottographic wavegram display. Compared with chest register, falsetto was produced with greater pulse amplitude of the glottal flow, H1-H2, mean airflow, and with lower maximum flow declination rate (MFDR), subglottal pressure, and sound pressure. Shifts of phonation type (breathy/flow/neutral/pressed) induced comparable systematic changes. Increase of vocal loudness resulted in increased subglottal pressure, average flow, sound pressure, MFDR, glottal flow pulse amplitude, and H1-H2. When changing either vocal register or phonation type, subglottal pressure and mean airflow showed an inverse relationship, that is, variation of glottal flow resistance. The direct relation between subglottal pressure and airflow when varying only vocal loudness demonstrated independent control of vocal loudness and glottal configuration. Achieving such independent control of phonatory control parameters would be an important target in vocal pedagogy and in voice therapy. Copyright © 2015 The Voice Foundation. Published by Elsevier Inc

  12. Plasma-Enhanced Copolymerization of Amino Acid and Synthetic Monomers

    Science.gov (United States)

    2011-12-16

    end cap containing a second inlet for the liquid monomer delivery (Scheme 1). The solid L-tyrosine monomer was placed in a resistively heated tantalum ...microroughness, which is indicative of uniform cross-linking and wetting of the deposits of all components. These films are free of pinhole defects as well

  13. Oligonucleotides with 1,4-dioxane-based nucleotide monomers

    DEFF Research Database (Denmark)

    Madsen, Andreas S; Wengel, Jesper

    2012-01-01

    An epimeric mixture of H-phosphonates 5R and 5S has been synthesized in three steps from known secouridine 1. Separation of the epimers has been accomplished by RP-HPLC, allowing full characterization and incorporation of monomers X and Y into 9-mer oligonucleotides using H-phosphonates building...... blocks 5R and 5S, respectively. A single incorporation of either monomer X or monomer Y in the central position of a DNA 9-mer results in decreased thermal affinity toward both DNA and RNA complements (ΔT(m) = -3.5 °C/-3.5 °C for monomer X and ΔT(m) = -11.0 °C/-6.5 °C for monomer Y). CD measurements do...

  14. Monomer-dimer tatami tilings of square regions

    CERN Document Server

    Erickson, Alejandro

    2011-01-01

    We prove that the number of monomer-dimer tilings of an $n\\times n$ square grid, with $mmonomers in which no four tiles meet at any point is $m2^m+(m+1)2^{m+1}$, when $m$ and $n$ have the same parity. In addition, we present a new proof of the result that there are $n2^{n-1}$ such tilings with $n$ monomers, which divides the tilings into $n$ classes of size $2^{n-1}$. The sum of these tilings over all monomer counts has the closed form $2^{n-1}(3n-4)+2$ and, curiously, this is equal to the sum of the squares of all parts in all compositions of $n$. We also describe two algorithms and a Gray code ordering for generating the $n2^{n-1}$ tilings with $n$ monomers, which are both based on our new proof.

  15. Novel Fluorinated Phosphorus–Sulfur Heteroatom Compounds: Synthesis and Characterization of Ferrocenyl- and Aryl-Phosphonofluorodithioic Salts, Adducts, and Esters

    Directory of Open Access Journals (Sweden)

    Guoxiong Hua

    2015-07-01

    Full Text Available A series of novel ferrocenyl- and aryl-phosphonofluorodithioic salts, adducts, and esters has been prepared. The reaction of 2,4-diferrocenyl-1,3,2,4-diathiadiphosphetane 2,4-disulfide {[FcP(μ-SS]2, FcLR} with dry KF or tetrabutylammonium fluoride (TBAF led to the corresponding potassium and tetrabutylammonium salts of ferrocenyldithiofluorophosphinic acids. Treating potassium ferrocenyldithiofluorophosphinic acid with an equimolar amount of tetraphenylphosphonium chloride readily yielded the corresponding organic adducts, and with mono- and di-halogenated alkanes generated a series of the corresponding esters of ferrocenylphosphonofluoridodithioates. Similarly, using 1,3-epithionaphtho[1,8-cd][1,2,6] oxadiphosphinine 1,3-disulfide or Belleau’s Reagent in place of FcLR resulted in the corresponding novel salts, adducts, and ester derivatives. All new compounds have been characterized by means of multi-NMR (1H, 13C, 31P, 19F spectroscopy and accurate mass measurement in conjunction with single crystal X-ray crystallography of four structures.

  16. Theoretical Study of Nonclassical Platinum Complexes Bonding to Purine Bases: How the Long-lived Monofunctional Adducts Can Be in Existence?

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The B3LYP/6-31G* level of theory was used for the optimization of nonclassical platinum drugs with planar aromatic heterocycle ligands in addition to their monoaqua species, diaqua species and monofunctional adducts. Single point calculations were performed on optimized geometries using the MP2/6-31G** method, and the Lanl2dz pseudo potential for the Pt atom remained constant in all calculations. It can be easily seen that the trans effect can influence both geometrical structures and bond dissociating energies (BDEs). On the basis of our calculation, we get that the long-lived monofunctional adducts with chloride ligand may be in existence, because they possessed higher stability energies, easily dissociated chloride compared with the monoaqua species dissociating chloride and that replacement of the first chloride by bases became exothermic in solution. Our calculated results also demonstrate that the strongest H-bonds appear in the complexes of q-wG and t-wG using different methods. In comparison with adenine complexes, the corresponding guanine complexes possess larger interaction energies as well as higher stability energies either corrected by basis set superposition error (bsse) of Boys-Bernardi counterpoise method or uncorrected both in gas phase and in solution with one exception that the stability energy of q-ClA complex in solution is larger than that of q-ClG complex. Finally, the nature of bond was analyzed in terms of partial charges distribution based on NBO population.

  17. Novel Fragmentation Pathways of Anionic Adducts of Steroids Formed by Electrospray Anion Attachment Involving Regioselective Attachment, Regiospecific Decompositions, Charge-Induced Pathways, and Ion-Dipole Complex Intermediates

    Science.gov (United States)

    Rannulu, Nalaka S.; Cole, Richard B.

    2012-09-01

    The analysis of several bifunctional neutral steroids, 5-α-pregnane diol (5-α-pregnane-3α-20βdiol), estradiol (3,17α-dihydroxy-1,3,5(10)-estratriene), progesterone (4-pregnene-3,20-dione), lupeol (3β-hydroxy-20(29)-lupene), pregnenolone (5-pregnen-3β-ol-20-one), and pregnenolone acetate (5-pregnen-3β-ol-20-one acetate) was accomplished by negative ion electrospray mass spectrometry (ESI-MS) employing adduct formation with various anions: fluoride, bicarbonate, acetate, and chloride. Fluoride yielded higher abundances of anionic adducts and more substantial abundances of deprotonated molecules compared with other investigated anions. Collision-induced dissociation (CID) of precursor [M + anion]- adducts of these steroids revealed that fluoride adduct [M + F]- precursors first lose HF to produce [M - H]- and then undergo consecutive decompositions to yield higher abundances of structurally-informative product ions than the other tested anions. In addition to charge-remote fragmentations, the majority of CID pathways of estradiol are deduced to occur via charge-induced fragmentation. Most interestingly, certain anions exhibit preferential attachment to a specific site on these bifunctional steroid molecules, which we are calling "regioselective anion attachment." Regioselective anion attachment is evidenced by subsequent regiospecific decomposition. Regioselective attachment of fluoride (and acetate) anions to low (and moderate) acidity functional groups of pregnenolone, respectively, is demonstrated using deuterated compounds. Moreover, the formation of unique intermediate ion-dipole complexes leading to novel fragmentation pathways of fluoride adducts of pregnenolone acetate, and bicarbonate adducts of d4-pregnenolone, are also discussed.

  18. Infrared spectroscopy of fullerene C60/anthracene adducts

    CERN Document Server

    Garcia-Hernandez, D A; Manchado, A

    2013-01-01

    Recent Spitzer Space Telescope observations of several astrophysical environments such as Planetary Nebulae, Reflection Nebulae, and R Coronae Borealis stars show the simultaneous presence of mid-infrared features attributed to neutral fullerene molecules (i.e., C60) and polycyclic aromatic hydrocarbons (PAHs). If C60 fullerenes and PAHs coexist in fullerene-rich space environments, then C60 may easily form adducts with a number of different PAH molecules; at least with catacondensed PAHs. Here we present the laboratory infrared spectra (~2-25 um) of C60 fullerene and anthracene Dies-Alder mono- and bis-adducts as produced by sonochemical synthesis. We find that C60/anthracene Diels-Alder adducts display spectral features strikingly similar to those from C60 (and C70) fullerenes and other unidentified infrared emission features. Thus, fullerene-adducts - if formed under astrophysical conditions and stable/abundant enough - may contribute to the infrared emission features observed in fullerene-containing circu...

  19. Study on the preirradiation polymerization of vinyl monomers

    Science.gov (United States)

    Yu-Ming, Liu; Yue-Qi, Yang; Zue-Teh, Ma

    This paper presents mainly the polymerization, copolymerization and crosslinking of monomers off-source induced by peroxides which are formed by high energy irradiation of vinyl monomers such as styrene (St), acrylonitrile (AN), methylmethacrylate (MMA), vinyl acetate (VAc) and 2-hydroxyethyl methacrylate (HEMA). The peroxides produced by irradiation of the above-mentioned monomers can not only induce the monomers themselves, but also another non-irradiated monomer to carry out copolymerization efficiently. The activation energy of peroxide formation, the apparent activation energy of polymerization and the activation energy of peroxide initiation by irradiation of vinyl monomers are: Ef(MMA) = 11, Ef(St) = 9.6, Ef(AN) = 8.5, EMMA = EVA = 11.4, Ei(MMA) = Ei(VA) = 13 kcal/mol. The rate of decomposition of monomer peroxides is smoother than that of BPO during the polymerization and so a smooth kinetic progress is obtained. The initiating ability of forming peroxides by irradiation of the vinyl monomers depends mainly on the chemical structure of the monomers. For instance, the main structure of peroxides formed during preirradiation MMA are: alternating peroxy-copolymer ? and random peroxy-copolymer ? Owing to the peroxy-bond which is unstable and in which homolytic breakage easily occurs to yield a pair of radicals, RO . is formed within the above-mentioned structural compounds, so that they possess stronger initiating reactivity. It is quite evident that the initiating reactivity of AN peroxide will be greatly reduced because of the conjugate double bond. In other words, the initiating ability of AN peroxide is lower than MMA peroxide and St peroxide.

  20. Highly Efficient Synthesis of Allopurinol Locked Nucleic Acid Monomer by C6 Deamination of 8-Aza-7-bromo-7-deazaadenine Locked Nucleic Acid Monomer

    DEFF Research Database (Denmark)

    Kosbar, Tamer Reda El-Saeed; Sofan, M.; Abou-Zeid, L.;

    2013-01-01

    An allopurinol locked nucleic acid (LNA) monomer was prepared by a novel strategy through C6 deamination of the corresponding 8-aza-7-bromo-7-deazaadenine LNA monomer with aqueous sodium hydroxide. An 8-aza-7-deazaadenine LNA monomer was also synthesized by a modification of the new synthetic pat...... the required LNA monomers. © Georg Thieme Verlag....

  1. Structural Characterization of Monomers and Oligomers of D-Amino Acid-Containing Peptides Using T-Wave Ion Mobility Mass Spectrometry

    Science.gov (United States)

    Pang, Xueqin; Jia, Chenxi; Chen, Zhengwei; Li, Lingjun

    2016-11-01

    The D-residues are crucial to biological function of D-amino acid containing peptides (DAACPs). Previous ion mobility mass spectrometry (IM-MS) studies revealing oligomerization patterns of amyloid cascade demonstrated conversion from native soluble unstructured assembly to fibril ß-sheet oligomers, which has been implicated in amyloid diseases, such as Alzheimer's disease and type 2 diabetes. Although neuropeptides are typically present at very low concentrations in circulation, their local concentrations could be much higher in large dense core vesicles, forming dimers or oligomers. We studied the oligomerization of protonated and metal-adducted achatin I and dermorphin peptide isomers with IM-MS. Our results suggested that dimerization, oligomerization, and metal adduction augment the structural differences between D/L peptide isomers compared to protonated monomers. Dimers and oligomers enhanced the structural differences between D/L peptide isomers in both aqueous and organic solvent system. Furthermore, some oligomer forms were only observed for either D- or L-isomers, indicating the importance of chiral center in oligomerization process. The oligomerization patterns of D/L isomers appear to be similar. Potassium adducts were detected to enlarge the structural differences between D/L isomers.

  2. Structural Characterization of Monomers and Oligomers of D-Amino Acid-Containing Peptides Using T-Wave Ion Mobility Mass Spectrometry

    Science.gov (United States)

    Pang, Xueqin; Jia, Chenxi; Chen, Zhengwei; Li, Lingjun

    2017-01-01

    The D-residues are crucial to biological function of D-amino acid containing peptides (DAACPs). Previous ion mobility mass spectrometry (IM-MS) studies revealing oligomerization patterns of amyloid cascade demonstrated conversion from native soluble unstructured assembly to fibril ß-sheet oligomers, which has been implicated in amyloid diseases, such as Alzheimer's disease and type 2 diabetes. Although neuropeptides are typically present at very low concentrations in circulation, their local concentrations could be much higher in large dense core vesicles, forming dimers or oligomers. We studied the oligomerization of protonated and metal-adducted achatin I and dermorphin peptide isomers with IM-MS. Our results suggested that dimerization, oligomerization, and metal adduction augment the structural differences between D/L peptide isomers compared to protonated monomers. Dimers and oligomers enhanced the structural differences between D/L peptide isomers in both aqueous and organic solvent system. Furthermore, some oligomer forms were only observed for either D- or L-isomers, indicating the importance of chiral center in oligomerization process. The oligomerization patterns of D/L isomers appear to be similar. Potassium adducts were detected to enlarge the structural differences between D/L isomers.

  3. Detection of adriamycin-DNA adducts by accelerator mass spectrometry.

    Science.gov (United States)

    Coldwell, Kate; Cutts, Suzanne M; Ognibene, Ted J; Henderson, Paul T; Phillips, Don R

    2010-01-01

    There have been many attempts in the past to determine whether significant levels of Adriamycin-DNA adducts form in cells and contribute to the anticancer activity of this agent. Supraclincal drug levels have been required to study drug-DNA adducts because of the lack of sensitivity associated with many of the techniques employed, including liquid scintillation counting of radiolabeled drug. The use of accelerator mass spectrometry (AMS) has provided the first direct evidence of Adriamycin-DNA adduct formation in cells at clinically relevant Adriamycin concentrations. The exceedingly sensitive nature of AMS has enabled over three orders of magnitude increased sensitivity of Adriamycin-DNA adduct detection (compared to liquid scintillation counting) and has revealed adduct formation within an hour of drug treatment. The rigorous protocol required for this approach, together with many notes on the precautions and procedures required in order to ensure that absolute levels of Adriamycin-DNA adducts can be determined with good reproducibility, is outlined in this chapter.

  4. Adduction of untested derived stimulus relations depends on environmental complexity.

    Science.gov (United States)

    Rippy, Sterling M; Doughty, Adam H

    2017-10-01

    The present research assessed adduction involving derived stimulus relations as a function of environmental complexity. In Group CA, four college students were trained with arbitrary-matching-to-sample discriminations that could have established four, 3-member stimulus classes. In Group EA, four other students were trained with discriminations that could have established four, 5-member classes. Neither group received derived-relations testing; instead, adduction was assessed immediately after the baseline discriminations were learned. The adduction assessment required participants to derive the untested CA (Group CA) or EA (Group EA) equivalence relations and combine them with their already learned math skills. All participants in Group CA showed above 90% accuracy during the adduction assessment, whereas only one of four Group EA participants responded in that manner. These results extend adduction to untested equivalence relations and clarify the environmental conditions under which such adduction is less likely to occur (i.e., with larger relational networks). Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Stable acetaldehyde--protein adducts as biomarkers of alcohol exposure.

    Science.gov (United States)

    Conduah Birt, J E; Shuker, D E; Farmer, P B

    1998-02-01

    The consumption of alcoholic beverages has been associated with increased risks of a number of chronic disorders including cancers. It is still not clear whether ethyl alcohol or other components such as metabolites are directly involved in the carcinogenic process or whether the effects are due to the modulation of metabolism of other carcinogens. At present, there is no good biomarker of alcohol intake, particularly at low or moderate levels of consumption. A number of studies have shown the ability of the major metabolite acetaldehyde to react with proteins in vitro to give stable and unstable adducts. The interaction of acetaldehyde with model peptides, which correspond to N-terminal globin sequences, was studied. The major stable adduct was identified by mass spectrometry and NMR as a diastereoisomeric mixture of imidazolidinones. This is believed to be formed by reaction and cyclization of the initial Schiff base adduct with the N-terminal valine. Incubation of human globin with acetaldehyde (0-2 mM) yielded products which were identified as the N-terminal adducts by electrospray ionization mass spectrometry (ESI-MS) of proteolytic digests. The specificity and sensitivity of the analysis was improved by the use of on-line HPLC-ESI-MS. Tryptic digests of the modified globin which contained both the N-terminal acetaldehyde adducts of alpha-globin (heptapeptide) and beta-globin (octapeptide) were resolved. These results suggest that analysis of stable imidazolidinone adducts is a promising approach to estimation of alcohol exposure.

  6. 21 CFR 864.7300 - Fibrin monomer paracoagulation test.

    Science.gov (United States)

    2010-04-01

    ... to detect fibrin monomer in the diagnosis of disseminated intravascular coagulation (nonlocalized clotting within a blood vessel) or in the differential diagnosis between disseminated intravascular coagulation and primary fibrinolysis (dissolution of the fibrin in a blood clot). (b) Classification. Class...

  7. PHOTOINDUCED GRAFTING OF ACRYLIC AND ALLYL MONOMERS ON POLYETHYLENE SURFACE

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhenfeng; HU Xingzhou; YAN Qing

    1995-01-01

    Photoinduced grafting of acrylic and allyl monomers on polyethylene surface was generally studied by using benzophenone (BP) as a photoinitiator. The grafting process was carried out either in vapor-phase or in solution of the monomers. In the vapor-phase reaction with a filter used to cut off the short wavelength UV light, allyl amine is the most reactive of the four monomers used and acrylic amide is comparatively more reactive than acrylic acid and allyl alcohol. Acetone, as a solvent and carrier for initiator and monomers, however, shows its reactivity to participate the reaction. The solution grafting with a filter is much faster than the corresponding vapor-phase reaction, and a fully covered surface by the grafted polymer can be achieved in this way.

  8. PREPARATION AND SURFACE PROPERTIES OF ACRYLIC COPOLYMERS CONTAINING FLUORINATED MONOMERS

    Institute of Scientific and Technical Information of China (English)

    Tai-jiang Gui; Hao Wei; Ying Zhao; Xiu-lin Wang; Du-jin Wang; Duan-fu Xu

    2006-01-01

    A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The surface property of the copolymer films was subsequently characterized. The contact angle measurements and energy dispersive analysis of X-ray (EDAX) show that the length and content ofperfluoroalkyl side chains in the copolymers are crucial for the preparation of the film with low surface energy. At a given content of fluorinated monomers in the copolymers, the longer the perfluoroalkyl side chain, the larger the water contact angle of the copolymer films will be. On the other hand, the higher the content of fluorinated monomers, the lower the surface energy is. The water contact angle increases with the increase of the fluorinated monomer content and reaches a plateau at 3 wt% of fluorinated monomer content.

  9. Composition of amino acids, fatty acids and dietary fibre monomers ...

    African Journals Online (AJOL)

    Composition of amino acids, fatty acids and dietary fibre monomers in kernels of ... Nuts are rich in protein and essential amino acids, and have a high energy value ... of protein, especially when combined with foods with high lysine content.

  10. chloride mass balance

    African Journals Online (AJOL)

    Agadaga

    1Geology Department, Faculty of Sciences and Techniques, University ... characterization of groundwater, rainfall and the unsaturated zone were also carried out using a .... 2008 in collaboration with the Senegal National Meteorological .... [Cl]sm is estimated as average chloride concentration in ..... sands of Australia.

  11. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    and time, and where both the surface chloride concentration and the diffusion coefficient are allowed to vary in time; the Mejlbro-Poulsen model is the general solution to Fick’s 2nd law. The paper also presents conversion formulas for the four decisive but rather abstract parameters to parameters, which...

  12. Synthesis of Functional Polyethylene Copolymers via Reactive Monomer

    Institute of Scientific and Technical Information of China (English)

    Hua-yi Li; Shu-qing Zhang; Ling-zhi Wang; You-liang Hu

    2005-01-01

    @@ 1Introduction Polyolefins are used widely due to their good performance and low price, but the poor compatibility and adhesion with other materials limits their applications in broader areas. Reactive monomer approach is effective to synthesize functional polyolefins[1]. In this case, olefin is copolymerized with a reactive comonomer to produce reactive intermediary which is then converted to functional group or initiator to initiate graft-from polymerization of polar monomer.

  13. A mitomycin-N6-deoxyadenosine adduct isolated from DNA.

    Science.gov (United States)

    Palom, Y; Lipman, R; Musser, S M; Tomasz, M

    1998-03-01

    A minor N6-deoxyadenosine adduct of mitomycin C (MC) was isolated from synthetic oligonucleotides and calf thymus DNA, representing the first adduct of MC and a DNA base other than guanine. The structure of the adduct (8) was elucidated using submilligram quantities of total available material. UV difference spectroscopy, circular dichroism, and electrospray mass spectroscopy as well as chemical transformations were utilized in deriving the structure of 8. A series of synthetic oligonucleotides was designed to probe the specificities of the alkylation of adenine by MC. The nature and frequency of the oligonucleotide-MC adducts formed under conditions of reductive activation of MC were determined by their enzymatic digestion to the nucleoside level followed by quantitative analysis of the products by HPLC. The analyses indicated the following: (i) (A)n sequence is favored over (AT)n for adduct formation; (ii) the alkylation favors the duplex structure; (iii) at adenine sites only monofunctional alkylation occurs; (iv) the adenine-to-alkylation frequency in the model oligonucleotides was 0.3-0.6 relative to guanine alkylation at the 5'-ApG sequence but only 0.02-0.1 relative to guanine alkylation at 5'-CpG. The 5'-phosphodiester linkage of the MC-adenine adduct is resistant to snake venom diesterase. The overall ratio of adenine to guanine alkylation in calf thymus DNA was 0.03, indicating that 8 is a minor MC-DNA adduct relative to MC-DNA adducts at guanine residues in the present experimental residues in the present experimental system. However, the HPLC elution time of 8 coincides with that of a major, unknown MC adduct detected previously in mouse mammary tumor cells treated with radiolabeled MC [Bizanek, R., Chowdary, D., Arai, H., Kasai, M., Hughes, C. S., Sartorelli, A. C., Rockwell, S., and Tomasz, M. (1993) Cancer Res. 53, 5127-5134]. Thus, 8 may be identical or closely related to this major adduct formed in vivo. This possibility can now be tested by

  14. Perturbation of the Monomer-Monomer Interfaces of the Benzoylformate Decarboxylase Tetramer

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, Forest H.; Rogers, Megan P.; Paul, Lake N.; McLeish, Michael J. [IUPUI; (Purdue)

    2014-08-14

    The X-ray structure of benzoylformate decarboxylase (BFDC) from Pseudomonas putida ATCC 12633 shows it to be a tetramer. This was believed to be typical of all thiamin diphosphate-dependent decarboxylases until recently when the structure of KdcA, a branched-chain 2-keto acid decarboxylase from Lactococcus lactis, showed it to be a homodimer. This lent credence to earlier unfolding experiments on pyruvate decarboxylase from Saccharomyces cerevisiae that indicated that it might be active as a dimer. To investigate this possibility in BFDC, we sought to shift the equilibrium toward dimer formation. Point mutations were made in the noncatalytic monomer–monomer interfaces, but these had a minimal effect on both tetramer formation and catalytic activity. Subsequently, the R141E/Y288A/A306F variant was shown by analytical ultracentrifugation to be partially dimeric. It was also found to be catalytically inactive. Further experiments revealed that just two mutations, R141E and A306F, were sufficient to markedly alter the dimer–tetramer equilibrium and to provide an ~450-fold decrease in kcat. Equilibrium denaturation studies suggested that the residual activity was possibly due to the presence of residual tetramer. The structures of the R141E and A306F variants, determined to <1.5 Å resolution, hinted that disruption of the monomer interfaces will be accompanied by movement of a loop containing Leu109 and Leu110. As these residues contribute to the hydrophobicity of the active site and the correct positioning of the substrate, it seems that tetramer formation may well be critical to the catalytic activity of BFDC.

  15. Trends in water monomer adsorption and dissociation on flat insulating surfaces.

    Science.gov (United States)

    Hu, Xiao Liang; Carrasco, Javier; Klimeš, Jiří; Michaelides, Angelos

    2011-07-21

    The interaction of water with solid surfaces is key to a wide variety of industrial and natural processes. However, the basic principles that dictate how stable and in which state (intact or dissociated) water will be on a given surface are not fully understood. Towards this end, we have used density functional theory to examine water monomer adsorption on the (001) surfaces of a broad range of alkaline earth oxides, alkaline earth sulfides, alkali fluorides, and alkali chlorides. Some interesting general conclusions are arrived at: (i) on all the surfaces considered only a few specific adsorption structures are favoured; (ii) water becomes more stable upon descending the oxide and fluoride series but does not vary much upon going down the chloride and sulfide series; (iii) water is stabilised both by an increase in the lattice constant, which facilitates hydrogen bonding to the substrate, and by the flexibility of the substrate. These are also factors that favour water dissociation. We hope that this study is of some value in better understanding the surface science of water in general, and in assisting in the interpretation and design of future experiments.

  16. Tissue distribution of DNA adducts and their persistence in blood of mice exposed to benzene

    Energy Technology Data Exchange (ETDEWEB)

    Guilan Li; Wang Chunguang; Songnian Yin [Institute of Occupational Medicine Chinese Academy of Preventive Medicine, Beijing (China); Weidong Xin [Medical College of Qingdao, Shandong Province (China)

    1996-12-01

    Chemicals combine with DNA, resulting in DNA damage, which could initiate carcinogenesis. To study whether benzene or benzene metabolites bind to DNA, DNA adducts in various tissues and their persistence in leukocytes were examined using the {sup 32}P-postlabeling assay. LACA mice were dosed in with benzene at 500 mg/kg bw twice daily for 5 days. Two additional spots of DNA adducts are formed in bone marrow cells, liver cells, and peripheral blood compared with control mice. The relative adduct labeling values are 10.39, 11.32, and 13.77 adducts; x 10{sup -8} nucleotides in these tissues, respectively. DNA adducts in blood leukocytes were observed at 1, 4, 7, 14, and 21 days after exposure to benzene, but adduct levels decreased as a function of time. Relative adduct labeling of {open_quotes}adduct B{close_quotes} declined linearly but mildly, while {open_quotes}adduct C{close_quotes} displayed a stepwise decrease. The relative adduct labeling values of both these adducts at day 14 were 50% of those at day 1 after the last treatment. Both adducts were still detectable at day 21 after benzene exposure. These studies demonstrate that benzene could induce DNA adducts; in bone marrow, liver, and white blood cells of mice dosed with benzene and that measurement of adducts in white blood cells may be useful as a biomarker to predict carcinogenic risk of benzene to workers exposed to benzene. 9 refs., 3 figs.

  17. Partitioning of knee joint internal forces in gait is dictated by the knee adduction angle and not by the knee adduction moment.

    Science.gov (United States)

    Adouni, M; Shirazi-Adl, A

    2014-05-01

    Medial knee osteoarthritis is a debilitating disease. Surgical and conservative interventions are performed to manage its progression via reduction of load on the medial compartment or equivalently its surrogate measure, the external adduction moment. However, some studies have questioned a correlation between the medial load and adduction moment. Using a musculoskeletal model of the lower extremity driven by kinematics-kinetics of asymptomatic subjects at gait midstance, we aim here to quantify the relative effects of changes in the knee adduction angle versus changes in the adduction moment on the joint response and medial/lateral load partitioning. The reference adduction rotation of 1.6° is altered by ±1.5° to 3.1° and 0.1° or the knee reference adduction moment of 17Nm is varied by ±50% to 25.5Nm and 8.5Nm. Quadriceps, hamstrings and tibiofemoral contact forces substantially increased as adduction angle dropped and diminished as it increased. The medial/lateral ratio of contact forces slightly altered by changes in the adduction moment but a larger adduction rotation hugely increased this ratio from 8.8 to a 90 while in contrast a smaller adduction rotation yielded a more uniform distribution. If the aim in an intervention is to diminish the medial contact force and medial/lateral load ratio, a drop of 1.5° in adduction angle is much more effective (causing respectively 12% and 80% decreases) than a reduction of 50% in the adduction moment (causing respectively 4% and 13% decreases). Substantial role of changes in adduction angle is due to the associated alterations in joint nonlinear passive resistance. These findings explain the poor correlation between knee adduction moment and tibiofemoral compartment loading during gait suggesting that the internal load partitioning is dictated by the joint adduction angle.

  18. Preparation and characterization of poly-(methacrylatoethyl trimethylammonium chloride-co-vinylbenzyl chloride-co-ethylene dimethacrylate monolith

    Directory of Open Access Journals (Sweden)

    Eko Malis

    2015-05-01

    Full Text Available A polymer monolithic column, poly-(methacrylatoethyltrimethylammonium chloride-co-vinylbenzyl chloride-co-ethylene dimethacrylate or poly-(MATE-co-VBC-co-EDMA was successfully prepared in the current study by one-step thermally initiated in situ polymerization, confined in a steel tubing of 0.5 mm i.d. and 1/16” o.d. The monoliths were prepared from methacrylatoethyltrimethylammonium chloride (MATE and vinylbenzyl chloride (VBC as monomer and ethylene dimethacrylate (EDMA as crosslinker using a binary porogen system of 1-propanol and 1,4-butanediol. The inner wall of steel tubing was pretreated with 3-methacryloxypropyl-trimethoxysilane (MAPS. In order to obtain monolith with adequate column efficiency and low flow resistance, some parameters such as total monomer concentration (%T and crosslinker concentration (%C were optimized. The morphology of this monolith was assessed by scanning electron microscopy (SEM. The properties of the monolithic column, such as permeability, binding capacity, and pore size distribution were also characterized in detail. From the results of the characterization of all monolith variation, monolith with %T 30 %C 50 and %T 35 %C 50 give the best characteristic. These monoliths have high permeability, adequate molecular recognition sites (represented with binding capacity value of over 20 mg/mL, and have over 80% flow through pores in their pore structure contribute to low flow resistance. The resulted monolithic columns have promising potential for dual mode liquid chromatography. MATE may contribute for anion-exchange while VBC may responsible for reversed-phase liquid chromatography.

  19. Spectral and Mechanistic Studies of the Reactions of Substituted 1,5-Benzothiazepine with Dichloroacetyl Chloride and Triethylamine

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A [2+2] cycloaddition adduct 2 and a novel ring-opening product 3 were obtained from the reactions of 2,3-benzothiazepines 1 with dichloroacetyl chloride and triethylamine. The relative ratios of 2 and 3 were affected by the addition order of reactants and reaction temperature. The structures were determined by spectral data and the reaction mechanisms for the formation of 2 and 3 were elucidated.

  20. Synthesis of biodegradable chiral poly(ester-imide)s derived from valine-, leucine- and tyrosine-containing monomers.

    Science.gov (United States)

    Mallakpour, Shadpour; Asadi, Parvin; Sabzalian, Mohammad R

    2011-11-01

    The present demand for a drastic reduction in environmental pollution is extended to qualitative change in the approach to development of biodegradable polymers. The aim of this article is to focus on the synthesis of biodegradable optically active poly(ester-imide)s (PEI)s, which compose of different amino acids in the main chain as well as in the side chain. These polymers were synthesized by polycondensation of diacid monomers such as 5-(2-phthalimidyl-3-methyl butanoylamino) isophthalic acid (1), 5-(4-methyl-2-phthalimidyl pentanoylamino)isophthalic acid (2) with N,N'-(pyromellitoyl)-bis-L: -tyrosine dimethyl ester (3) as a phenolic diol. The direct polycondensation reaction was carried out in a system of tosyl chloride, pyridine and N,N-dimethylformamide as a condensing agent under conventional heating conditions. The optically active PEIs were obtained in good yield and moderate inherent viscosity. The synthesized polymers were characterized by means of FT-IR, (1)H-NMR, elemental and thermo gravimetric analysis techniques. In addition, in vitro toxicity and soil burial test were employed for assessing the sensitivity of these compounds to microbial degradation. To this purpose, biodegradability behavior of the monomers and polymers were investigated in culture media and soil condition. The results of this study revealed that synthesized monomers and their derived polymers are biologically active and probably microbiologically biodegradable.

  1. Effect of Michael adduction on peptide preservation in natural waters.

    Science.gov (United States)

    McKee, G A; Kobiela, M E; Hatcher, P G

    2014-09-20

    The reaction of peptides with chemicals already present in natural waters (such as polycyclic aromatic hydrocarbons) is one method that has been suggested to preserve peptides for the longer term. In this study we test whether the reaction of tetrapeptides with a model quinone can help stabilise the peptide in one polluted riverine system, Elizabeth River in Virginia, USA. We found that there is almost no difference in rate constants between the peptide and its quinone adduct (e.g. 6.62 versus 6.86 per day for AVFA and its respective adduct). However, when monitoring the removal of the adduct from natural water, we identified two new compounds that are formed as a result of its decomposition. Using tandem mass spectrometry we identified potential structures and mechanisms for the formation of these new compounds. These new compounds are more recalcitrant than their parent peptide-quinone adduct, since they remain in solution for 3-10 times longer. Based on our findings we postulate that the reaction of peptides with quinones can help preserve sections of the original peptide following an initial rearrangement of the original adduct, potentially explaining why seemingly labile peptides are observed in most natural waters.

  2. Glutathione Adduct Patterns of Michael-Acceptor Carbonyls.

    Science.gov (United States)

    Slawik, Christian; Rickmeyer, Christiane; Brehm, Martin; Böhme, Alexander; Schüürmann, Gerrit

    2017-02-22

    Glutathione (GSH) has so far been considered to facilitate detoxification of soft organic electrophiles through covalent binding at its cysteine (Cys) thiol group, followed by stepwise catalyzed degradation and eventual elimination along the mercapturic acid pathway. Here we show that in contrast to expectation from HSAB theory, Michael-acceptor ketones, aldehydes and esters may form also single, double and triple adducts with GSH involving β-carbon attack at the much harder N-terminus of the γ-glutamyl (Glu) unit of GSH. In particular, formation of the GSH-N single adduct contradicts the traditional view that S alkylation always forms the initial reaction of GSH with Michael-acceptor carbonyls. To this end, chemoassay analyses of the adduct formation of GSH with nine α,β-unsaturated carbonyls employing high performance liquid chromatography and tandem mass spectrometry have been performed. Besides enriching the GSH adductome and potential biomarker applications, electrophilic N-terminus functio-nalization is likely to impair GSH homeostasis substantially through blocking the γ-glutamyl transferase catalysis of the first breakdown step of modified GSH, and thus its timely reconstitution. The discussion includes a comparison with cyclic adducts of GSH and furan metabolites as reported in literature, and quantum chemically calculated thermodynamics of hard-hard, hard-soft and soft-soft adducts.

  3. Organocatalytic removal of formaldehyde adducts from RNA and DNA bases

    Science.gov (United States)

    Karmakar, Saswata; Harcourt, Emily M.; Hewings, David S.; Lovejoy, Alexander F.; Kurtz, David M.; Ehrenschwender, Thomas; Barandun, Luzi J.; Roost, Caroline; Alizadeh, Ash A.; Kool, Eric T.

    2015-09-01

    Formaldehyde is universally used to fix tissue specimens, where it forms hemiaminal and aminal adducts with biomolecules, hindering the ability to retrieve molecular information. Common methods for removing these adducts involve extended heating, which can cause extensive degradation of nucleic acids, particularly RNA. Here, we show that water-soluble bifunctional catalysts (anthranilates and phosphanilates) speed the reversal of formaldehyde adducts of mononucleotides over standard buffers. Studies with formaldehyde-treated RNA oligonucleotides show that the catalysts enhance adduct removal, restoring unmodified RNA at 37 °C even when extensively modified, while avoiding the high temperatures that promote RNA degradation. Experiments with formalin-fixed, paraffin-embedded cell samples show that the catalysis is compatible with common RNA extraction protocols, with detectable RNA yields increased by 1.5-2.4-fold using a catalyst under optimized conditions and by 7-25-fold compared with a commercial kit. Such catalytic strategies show promise for general use in reversing formaldehyde adducts in clinical specimens.

  4. Benzalkonium Chloride and Glaucoma

    OpenAIRE

    Rasmussen, Carol A.; Kaufman, Paul L.; Kiland, Julie A.

    2014-01-01

    Glaucoma patients routinely take multiple medications, with multiple daily doses, for years or even decades. Benzalkonium chloride (BAK) is the most common preservative in glaucoma medications. BAK has been detected in the trabecular meshwork (TM), corneal endothelium, lens, and retina after topical drop installation and may accumulate in those tissues. There is evidence that BAK causes corneal and conjunctival toxicity, including cell loss, disruption of tight junctions, apoptosis and preapo...

  5. Monomers of cutin biopolymer: sorption and esterification on montmorillonite surfaces

    Science.gov (United States)

    Olshansky, Yaniv; Polubesova, Tamara; Chefetz, Benny

    2013-04-01

    One of the important precursors for soil organic matter is plant cuticle, a thin layer of predominantly lipids that cover all primary aerial surfaces of vascular plants. In most plant species cutin biopolymer is the major component of the cuticle (30-85% weight). Therefore cutin is the third most abundant plant biopolymer (after lignin and cellulose). Cutin is an insoluble, high molecular weight bio-polyester, which is constructed of inter-esterified cross linked hydroxy-fatty acids and hydroxyepoxy-fatty acids. The most common building blocks of the cutin are derivatives of palmitic acid, among them 9(10),16 dihydroxy palmitic acid (diHPA) is the main component. These fatty acids and their esters are commonly found in major organo-mineral soil fraction-humin. Hence, the complexes of cutin monomers with minerals may serve as model of humin. Both cutin and humin act as adsorption efficient domains for organic contaminants. However, only scarce information is available about the interactions of cutin with soil mineral surfaces, in particular with common soil mineral montmorillonite. The main hypothesize of the study is that adsorbed cutin monomers will be reconstituted on montmorillonite surface due to esterification and oligomerization, and that interactions of cutin monomers with montmorillonite will be affected by the type of exchangeable cation. Cutin monomers were obtained from the fruits of tomato (Lycopersicon esculentum). Adsorption of monomers was measured for crude Wyoming montmorillonites and montmorillonites saturated with Fe3+ and Ca2+. To understand the mechanism of monomer-clay interactions and to evaluate esterification on the clay surface, XRD and FTIR analyses of the montmorillonite-monomers complexes were performed. Our results demonstrated that the interactions of cutin monomers with montmorillonite are affected by the type of exchangeable cation. Isotherms of adsorption of cutin monomers on montmorillonites were fitted by a dual mode model of

  6. Comparative study on adhesive performance of functional monomers.

    Science.gov (United States)

    Yoshida, Y; Nagakane, K; Fukuda, R; Nakayama, Y; Okazaki, M; Shintani, H; Inoue, S; Tagawa, Y; Suzuki, K; De Munck, J; Van Meerbeek, B

    2004-06-01

    Mild self-etch adhesives demineralize dentin only partially, leaving hydroxyapatite around collagen within a submicron hybrid layer. We hypothesized that this residual hydroxyapatite may serve as a receptor for chemical interaction with the functional monomer and, subsequently, contribute to adhesive performance in addition to micro-mechanical hybridization. We therefore chemically characterized the adhesive interaction of 3 functional monomers with synthetic hydroxyapatite, using x-ray photoelectron spectroscopy and atomic absorption spectrophotometry. We further characterized their interaction with dentin ultra-morphologically, using transmission electron microscopy. The monomer 10-methacryloxydecyl dihydrogen phosphate (10-MDP) readily adhered to hydroxyapatite. This bond appeared very stable, as confirmed by the low dissolution rate of its calcium salt in water. The bonding potential of 4-methacryloxyethyl trimellitic acid (4-MET) was substantially lower. The monomer 2-methacryloxyethyl phenyl hydrogen phosphate (phenyl-P) and its bond to hydroxyapatite did not appear to be hydrolytically stable. Besides self-etching dentin, specific functional monomers have additional chemical bonding efficacy that is expected to contribute to their adhesive potential to tooth tissue.

  7. Study on antibacterial dental resin using tri-n-butyl(4-vinylbenzyl)phosphonium chloride.

    Science.gov (United States)

    Kurata, Shigeaki; Hamada, Nobushiro; Kanazawa, Akihiko; Endo, Takeshi

    2011-01-01

    The antibacterial properties of a polymeric phosphonium salt were studied to determine its suitability as an additive to develop an antibacterial dental resin. The phosphonium salt monomer studied was tri-n-butyl(4-vinylbenzyl)phosphonium chloride (VP), and acrylic acid (AC) and methacryloyloxyethyl trimethyl ammonium chloride (MA) were used as controls. The antibacterial activity of these monomers and their corresponding polymers (PVP, PAC, and PMA) against Streptococcus mutans (S. mutans) was examined. When incubating S. mutans in a medium containing 10 μmol/mL for 24 hours, the antibacterial activity of PVP against S. mutans was high, while the antibacterial activity of PMA and VP was lower. AC, PAC and PMA exhibited the lowest antibacterial activity. The mechanical properties of the copolymers of methyl methacrylate, 2-hydroxyethyl methacrylate, and VP decreased as VP content increased, and were lower than those of poly(methyl methacrylate).

  8. Chemistry and Biology of Aflatoxin-DNA Adducts

    Energy Technology Data Exchange (ETDEWEB)

    Stone, Michael P.; Banerjee, Surajit; Brown, Kyle L.; Egli, Martin (Vanderbilt)

    2012-03-27

    Aspergillus flavus is a fungal contaminant of stored rice, wheat, corn, and other grainstuffs, and peanuts. This is of concern to human health because it produces the mycotoxin aflatoxin B{sub 1} (AFB{sub 1}), which is genotoxic and is implicated in the etiology of liver cancer. AFB{sub 1} is oxidized in vivo by cytochrome P450 to form aflatoxin B{sub 1} epoxide, which forms an N7-dG adduct (AFB{sub 1}-N7-dG) in DNA. The latter rearranges to a formamidopyrimidine (AFB{sub 1}-FAPY) derivative that equilibrates between {alpha} and {beta} anomers of the deoxyribose. In DNA, both the AFB{sub 1}-N7-dG and AFB{sub 1}-{beta}-FAPY adducts intercalate above the 5'-face of the damaged guanine. Each produces G {yields} T transversions in Escherichia coli, but the AFB{sub 1}-{beta}-FAPY adduct is more mutagenic. The Sulfolobus solfataricus P2 DNA polymerase IV (Dpo4) provides a model for understanding error-prone bypass of the AFB{sub 1}-N7-dG and AFB{sub 1}-{beta}-FAPY adducts. It bypasses the AFB{sub 1}-N7-dG adduct, but it conducts error-prone replication past the AFB{sub 1}-FAPY adduct, including mis-insertion of dATP, consistent with the G {yields} T mutations characteristic of AFB{sub 1} mutagenesis in E. coli. Crystallographic analyses of a series of binary and ternary complexes with the Dpo4 polymerase revealed differing orientations of the N7-C8 bond of the AFB{sub 1}-N7-dG adduct as compared to the N{sup 5}-C8 bond in the AFB{sub 1}-{beta}-FAPY adduct, and differential accommodation of the intercalated AFB{sub 1} moieties within the active site. These may modulate AFB{sub 1} lesion bypass by this polymerase.

  9. EMG evaluation of hip adduction exercises for soccer players

    DEFF Research Database (Denmark)

    Serner, Andreas; Jakobsen, Markus Due; Andersen, Lars Louis

    2014-01-01

    INTRODUCTION: Exercise programmes are used in the prevention and treatment of adductor-related groin injuries in soccer; however, there is a lack of knowledge concerning the intensity of frequently used exercises. OBJECTIVE: Primarily to investigate muscle activity of adductor longus during six...... and the abdominals showed relatively low values (5-48% nEMG, pprevention and treatment of groin injuries....... The Copenhagen Adduction and the hip adduction with an elastic band are dynamic high-intensity exercises, which can easily be performed at any training facility and could therefore be relevant to include in future prevention and treatment programmes....

  10. Quantitation of DNA Adducts Induced by 1,3-Butadiene

    Science.gov (United States)

    Sangaraju, Dewakar; Villalta, Peter W.; Wickramaratne, Susith; Swenberg, James; Tretyakova, Natalia

    2014-07-01

    Human exposure to 1,3-butadiene (BD) present in automobile exhaust, cigarette smoke, and forest fires is of great concern because of its potent carcinogenicity. The adverse health effects of BD are mediated by its epoxide metabolites such as 3,4-epoxy-1-butene (EB), which covalently modify genomic DNA to form promutagenic nucleobase adducts. Because of their direct role in cancer, BD-DNA adducts can be used as mechanism-based biomarkers of BD exposure. In the present work, a mass spectrometry-based methodology was developed for accurate, sensitive, and precise quantification of EB-induced N-7-(1-hydroxy-3-buten-2-yl) guanine (EB-GII) DNA adducts in vivo. In our approach, EB-GII adducts are selectively released from DNA backbone by neutral thermal hydrolysis, followed by ultrafiltration, offline HPLC purification, and isotope dilution nanoLC/ESI+-HRMS3 analysis on an Orbitrap Velos mass spectrometer. Following method validation, EB-GII lesions were quantified in human fibrosarcoma (HT1080) cells treated with micromolar concentrations of EB and in liver tissues of rats exposed to sub-ppm concentrations of BD (0.5-1.5 ppm). EB-GII concentrations increased linearly from 1.15 ± 0.23 to 10.11 ± 0.45 adducts per 106 nucleotides in HT1080 cells treated with 0.5-10 μM DEB. EB-GII concentrations in DNA of laboratory rats exposed to 0.5, 1.0, and 1.5 ppm BD were 0.17 ± 0.05, 0.33 ± 0.08, and 0.50 ± 0.04 adducts per 106 nucleotides, respectively. We also used the new method to determine the in vivo half-life of EB-GII adducts in rat liver DNA (2.20 ± 0.12 d) and to detect EB-GII in human blood DNA. To our knowledge, this is the first application of nanoLC/ESI+-HRMS3 Orbitrap methodology to quantitative analysis of DNA adducts in vivo.

  11. A stabilised tris(hydroxymethyl)aminomethane adduct in reduced collagen.

    Science.gov (United States)

    Cannon, D J; Davison, P F

    1976-01-01

    The reduction of collagen with sodium [3H] borohydride in the presence of Tris buffer results in the stabilization of a Schiff base adduct which is formed between allysine residues and tris(hydroxymethyl)aminomethane. The reduced, radioactive derivative of this adduct has been identified in hydrolyzates or reduced collagen. It elutes before hydroxylysine on an amino acid analyzer column close to the position of dihydroxylysinonorleucine. Similar artifacts may occur when aldehydes present in or added to proteins react with Tris or other amines prior to reduction.

  12. The limits of precision monomer placement in chain growth polymerization

    Science.gov (United States)

    Gody, Guillaume; Zetterlund, Per B.; Perrier, Sébastien; Harrisson, Simon

    2016-02-01

    Precise control over the location of monomers in a polymer chain has been described as the `Holy Grail' of polymer synthesis. Controlled chain growth polymerization techniques have brought this goal closer, allowing the preparation of multiblock copolymers with ordered sequences of functional monomers. Such structures have promising applications ranging from medicine to materials engineering. Here we show, however, that the statistical nature of chain growth polymerization places strong limits on the control that can be obtained. We demonstrate that monomer locations are distributed according to surprisingly simple laws related to the Poisson or beta distributions. The degree of control is quantified in terms of the yield of the desired structure and the standard deviation of the appropriate distribution, allowing comparison between different synthetic techniques. This analysis establishes experimental requirements for the design of polymeric chains with controlled sequence of functionalities, which balance precise control of structure with simplicity of synthesis.

  13. Biosynthesis of Polyhydroxyalkanoates Consisting of Short-chain-length Monomers and Medium-chain-length Monomers by Pseudomonas YS1

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    A strain capable of producing polyhydroxyalkanoates (PHAs) consisting of short- and medium-chain-length monomers was identified as Pseudomonas sp.coded as YS1.The strain synthesized PHAs containing monomers of hydroxybutyrate(HB or C4) and/or hydroxyoctanoate (HO or C8) and/or hydroxydecanoate (HD or C10) when grown in various substrates including glucose, raw sugar, molasses and various fatty acids.It was found that growth temperature affected the HB and HO monomer contents in the PHA.HB content in PHA increased from mole fraction 69% at 26℃ to mole fraction 85% at 37℃ while HO content decreased from mole fraction 29% at 26℃ to mole fraction 12% at 37℃.The temperature effect provides a simple and effective way to control the PHA composition and hence control the PHA mechanical and other physical properties.Also, the fermentor experiment indicated that PHB formation was growth associated and HO monomer production was in fact promoted by N-limitation.This conclusion was further supported by the fact that the formation of PHB only polyester was observed only when C/N molar ratio was smaller than 20.Higher C/N ratio led to the formation of HO monomers in the polyesters.

  14. Monomer release from nanofilled and microhybrid dental composites after bleaching.

    Directory of Open Access Journals (Sweden)

    Masumeh Hasani Tabatabaee

    2014-02-01

    Full Text Available The aim of this study was to assess the effect of bleaching on elution of monomers from nanofilled and microhybrid composites.80 samples (5mm diameter and 3mm thickness of each composite were prepared. After curing, half of them were randomly polished. Each group was divided into 8 subgroups and immersed in water or 10%, 20% and 30% H2O2 for 3 or 8 hours. Eluted Bis-GMA (Bis-phenol A Glycidyl Dimethacrylate, TEGDMA (Triethyleneglycol Dimethacrylate, UDMA (Urethane Dimethacrylate and BisEMA (Bis-phenol A ethoxylate Dimethacrylate were quantified by high performance liquid chromatography and the results were analyzed by univariate ANOVA and t-test (P<0.05.Bleach significantly increased the overall release of monomers (P<0.001; TEGDMA was released more than Bis-GMA (P<0.001. Supreme released more TEGDMA compared to Z250 (P<0.001. Bleaching increased the release of this monomer (P<0.001. Increasing both the concentration of H2O2, and the immersion time, increased the release of TEGDMA (P<0.001. Polishing had no effect on release of this monomer (P=0.952. Supreme released more Bis-GMA than Z250 (P=0.000. The more concentrated H2O2 caused more elution of Bis-GMA (P= 0.003; while the effect of immersion time was not significant (P=0.824. Polishing increased the release of Bis-GMA (P=0.001. Neither the type of composite nor Bleaching had any effect on release of UDMA (P=0.972 and (P=0.811 respectively. Immersion duration increased the release of UDMA (P=0.002, as well as polishing (P=0.024.Bleaching increased the release of monomers. Nanofilled composites released more monomer than the microfilled.

  15. The study on mechanism of holographic recording in photopolymer with dual monomer

    Science.gov (United States)

    Zhai, Qianli; Tao, Shiquan; Wang, Dayong

    2010-06-01

    In this paper we study the dynamics of refractive index modulation in a dual-monomer photopolymer through grating growth under different experiment stages. By using different sets of parameters for vinyl monomers (NVC) and acrylate monomers (POEA) respectively, a composite dual-monomer model, extended from the uniform post-exposure (UPE) model for single monomer photopolymer, is proposed and fitted with the experiment data very well. Further discussions indicate that the dominant contribution to the total index modulation is made by NVC monomers, and a brief explanation of the function of POEA monomers is given.

  16. PMR polyimide composites for aerospace applications. [Polymerization of Monomer Reactants

    Science.gov (United States)

    Serafini, T. T.

    1984-01-01

    A novel class of addition-type polyimides has been developed in response to the need for high temperature polymers with improved processability. The new plastic materials are known as PMR (for in situ polymerization of monomer reactants) polyimides. The highly processable PMR polyimides have made it possible to realize much of the potential of high temperature resistant polymers. Monomer reactant combinations for several PMR polyimides have been identified. The present investigation is concerned with a review of the current status of PMR polyimides. Attention is given to details of PMR polyimide chemistry, the processing of composites and their properties, and aerospace applications of PMR-15 polyimide composites.

  17. Cationically polymerizable monomers derived from renewable sources. Annual performance report

    Energy Technology Data Exchange (ETDEWEB)

    Crivello, J.V.

    1992-10-01

    The objectives of this project are to design and synthesize novel monomers which orginate from renewable biological sources and to carry out their rapid, efficient, pollution-free and energy efficient cationic polymerization to useful products under the influence of ultraviolet light or heat. A summary of the results of the past year`s research on cationically polymerizable monomers derived from renewable sources is presented. Three major areas of investigation corresponding to the different classes of naturally occurring starting materials were investigated; epoxidized terpenes and natural rubber and vinyl ethers from alcohols and carbohydrates.

  18. [Influence Factors on Monomer Conversion of Dental Composite Resin].

    Science.gov (United States)

    Wang, Shuang; Gao, Yan; Wang, Jing; Zhang, Yan; Zhang, Yuntao; Wang, Fanghui; Wang, Qingshan

    2015-04-01

    Dental composite resin is a kind of material which has been widely used in dental restoration. Research has found that the influence of residual monomer on the material mechanical, chemical and biological properties cannot be ignored. This paper elaborates these harms of residual monomers. The effects of resin matrix, inorganic filler and initiating system, illumination, secondarily treatment on the degree of conversion were also analyzed. The paper also discusses the effective measures to increase the conversion, and offers theoretical basis for the clinical application and development of composite resin.

  19. Breathing zone concentrations of methylmethacrylate monomer during joint replacement operations

    DEFF Research Database (Denmark)

    Darre, E; Jørgensen, L G; Vedel, P;

    1992-01-01

    By use of a methylmethacrylate (MMA) Dräger tube and bellow bump, the breathing zone concentrations of MMA monomer were measured for the operating surgeon during cementation of the components of hip and knee joint prostheses. The highest recordings (50-100 p.p.m.) were encountered during cementat......By use of a methylmethacrylate (MMA) Dräger tube and bellow bump, the breathing zone concentrations of MMA monomer were measured for the operating surgeon during cementation of the components of hip and knee joint prostheses. The highest recordings (50-100 p.p.m.) were encountered during...

  20. Strategy for identifying unknown hemoglobin adducts using adductome LC-MS/MS data: Identification of adducts corresponding to acrylic acid, glyoxal, methylglyoxal, and 1-octen-3-one.

    Science.gov (United States)

    Carlsson, Henrik; Törnqvist, Margareta

    2016-06-01

    Electrophilic compounds have the ability to form adducts with nucleophilic sites in proteins and DNA in tissues, and thereby constitute risks for toxic effects. Adductomic approaches are developed for systematic screening of adducts to DNA and blood proteins, with the aim to detect unknown internal exposures to electrophiles. In a previous adductomic screening of adducts to N-terminals in hemoglobin, using LC-MS/MS, 19 unknown adducts were detected in addition to seven previously identified adducts. The present paper describes the identification of four of these unknown adducts, as well as the strategy used to identify them. Using LC-MS data from the screening, hypotheses about adduct identities were formulated: probable precursor electrophiles with matching molecular weights were suggested based on the molecular weights of the modifications and the retention times of the analytes, in combination with comparisons of theoretical Log P calculations and databases. Reference adducts were generated by incubation of blood samples with the hypothesized precursor electrophiles. The four identified precursor electrophiles, corresponding to the observed unknown adducts, were glyoxal, methylglyoxal, acrylic acid and 1-octen-3-one. Possible origins/exposure sources and toxicological information concerning the electrophilic precursors are discussed. The identified adducts could be explored as possible biomarkers for exposure.

  1. DNA and protein adducts in human tissues resulting from exposure to tobacco smoke

    OpenAIRE

    Phillips, David H.; Venitt, Stan

    2012-01-01

    Tobacco smoke contains a variety of genotoxic carcinogens that form adducts with DNA and protein in the tissues of smokers. Not only are these biochemical events relevant to the carcinogenic process, but the detection of adducts provides a means of monitoring exposure to tobacco smoke. Characterization of smoking-related adducts has shed light on the mechanisms of smoking-related diseases and many different types of smoking-derived DNA and protein adducts have been identified. Such approaches...

  2. UNUSUALLY STABLE ADDUCT BETWEEN METHANOLYZED AMOXICILLIN OR AMPICILLIN AND THEIR DIKETOPIPERAZINE DERIVATIVES.

    Science.gov (United States)

    Kosińska, Katarzyna; Frański, Rafał; Frańska, Magdalena

    2016-01-01

    Amoxicillin and ampicillin were subjected to methanolysis. As expected, the methanolysis products were observed by HPLC-ESI-MS. Besides these products, diketopiperazine derivatives were also detected. Additionally, unusually stable adduct formed between the products of methanolysis and diketopiperazine derivatives was also identified. Analogical adducts were detected when ethanolysis was performed instead of methanolysis. HPLC-ESI-MS analysis of the separated adducts confirmed that the adducts were composed of methanolysis products and diketopiperazine derivatives.

  3. Oxomemazine hydro-chloride.

    Science.gov (United States)

    Siddegowda, M S; Butcher, Ray J; Akkurt, Mehmet; Yathirajan, H S; Ramesh, A R

    2011-08-01

    IN THE TITLE COMPOUND [SYSTEMATIC NAME: 3-(5,5-dioxo-phen-othia-zin-10-yl)-N,N,2-trimethyl-propanaminium chloride], C(18)H(23)N(2)O(2)S(+)·Cl(-), the dihedral angle between the two outer aromatic rings of the phenothia-zine unit is 30.5 (2)°. In the crystal, the components are linked by N-H⋯Cl and C-H⋯Cl hydrogen bonds and C-H⋯π inter-actions.

  4. 78 FR 46260 - Sorbitan Monooleate Ethylene Oxide Adduct; Exemption From the Requirement of a Tolerance

    Science.gov (United States)

    2013-07-31

    ... AGENCY 40 CFR Part 180 Sorbitan Monooleate Ethylene Oxide Adduct; Exemption From the Requirement of a... ethylene oxide adduct'' and as ``polysorbate 80'') when used as an inert ingredient in antimicrobial... residues of sorbitan monooleate ethylene oxide adduct. DATES: This regulation is effective July 31, 2013...

  5. 40 CFR 721.465 - Alkoxylated alkylpolyol acrylates, adduct with alkylamine (generic).

    Science.gov (United States)

    2010-07-01

    ..., adduct with alkylamine (generic). 721.465 Section 721.465 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.465 Alkoxylated alkylpolyol acrylates, adduct with... substances identified generically as alkoxylated alkylpolyol acrylates, adduct with alkylamine (PMNs...

  6. 40 CFR 721.1850 - Toluene sulfonamide bis-phe-nol A epoxy adduct.

    Science.gov (United States)

    2010-07-01

    ... epoxy adduct. 721.1850 Section 721.1850 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.1850 Toluene sulfonamide bis-phe-nol A epoxy adduct. (a) Chemical... as toluene sulfonamide bisphenol A epoxy adduct (PMN P-90-113) is subject to reporting under...

  7. Environmental, Dietary, Maternal, and Fetal Predictors of Bulky DNA Adducts in Cord Blood

    DEFF Research Database (Denmark)

    Pedersen, Marie; Mendez, Michelle A; Schoket, Bernadette

    2015-01-01

    BACKGROUND: Bulky DNA adducts reflect genotoxic exposures, have been associated with lower birth weight, and may predict cancer risk. OBJECTIVE: We selected factors known or hypothesized to affect in utero adduct formation and repair and examined their associations with adduct levels in neonates....

  8. Environmental, Dietary, Maternal, and Fetal Predictors of Bulky DNA Adducts in Cord Blood

    DEFF Research Database (Denmark)

    Pedersen, Marie; Mendez, Michelle A; Schoket, Bernadette

    2015-01-01

    BACKGROUND: Bulky DNA adducts reflect genotoxic exposures, have been associated with lower birth weight, and may predict cancer risk. OBJECTIVE: We selected factors known or hypothesized to affect in utero adduct formation and repair and examined their associations with adduct levels in neonates....

  9. Aldehyde and Ketone Adducts of the Gaseous Trifluoromethyl Cation

    NARCIS (Netherlands)

    Oomens, J.; Morton, T. H.

    2011-01-01

    IR spectra of CF3+ adduct ions are reported for the first time using infrared multiple photon dissociation (IRMPD). Carbonyl stretches of ketone conjugate acids shift less than do those of ions containing C=OCF3+ groups. Carbonyl absorptions shift in proportion to the empirical softness of the

  10. Aldehyde and ketone adducts of the gaseous trifluoromethyl cation

    NARCIS (Netherlands)

    Oomens, J.; Morton, T.H.

    2011-01-01

    IR spectra of CF3+ adduct ions are reported for the first time using infrared multiple photon dissociation (IRMPD). Carbonyl stretches of ketone conjugate acids shift less than do those of ions containing C═OCF3+ groups. Carbonyl absorptions shift in proportion to the empirical softness of the

  11. SOME SULFATO ADDUCTS AND DERIVATIVE: SYNTHESIS AND SPECTROSCOPIC STUDY

    Directory of Open Access Journals (Sweden)

    MOUHAMADOU BIRAME DIOP

    2014-11-01

    Full Text Available Three new adducts and derivative have been synthesized and studied by infrared and NMR spectroscopies. The suggested structures are discrete with a sulfate behaving as a monochelating, bichelating or monodentate ligand, the environments around the tin centre being octahedral or pentagonal bipyramidal. In all the studied compounds, proposed supramolecular architectures may be obtained when intermolecular hydrogen bonds are considered.

  12. Theoretical investigations on the formation of nitrobenzanthrone-DNA adducts.

    Science.gov (United States)

    Arlt, Volker M; Phillips, David H; Reynisson, Jóhannes

    2011-09-07

    3-Nitrobenzanthrone (3-NBA) is a potent mutagen and suspected human carcinogen identified in diesel exhaust. The thermochemical formation cascades were calculated for six 3-NBA-derived DNA adducts employing its arylnitrenium ion as precursor using density functional theory (DFT). Clear exothermic pathways were found for four adducts, i.e., 2-(2'-deoxyadenosin-N(6)-yl)-3-aminobenzanthrone, 2-(2'-deoxyguanosin-N(2)-yl)-3-aminobenzanthrone, N-(2'-deoxyguanosin-8-yl)-3-aminobenzanthrone and 2-(2'-deoxyguanosin-8-yl)-3-aminobenzanthrone. All four have been observed to be formed in cell-free experimental systems. The formation of N-(2'-deoxyadenosin-8-yl)-3-aminobenzanthrone is predicted to be not thermochemically viable explaining its absence in either in vitro or in vivo model systems. However, 2-(2'-deoxyadenosin-8-yl)-3-aminobenzanthrone, can be formed, albeit not as a major product, and is a viable candidate for an unknown adenine adduct observed experimentally. 2-nitrobenzanthrone (2-NBA), an isomer of 3-NBA, was also included in the calculations; it has a higher abundance in ambient air than 3-NBA, but a much lower genotoxic potency. Similar thermochemical profiles were obtained for the calculated 2-NBA-derived DNA adducts. This leads to the conclusion that enzymatic activation as well as the stability of its arylnitrenium ion are important determinants of 2-NBA genotoxicity.

  13. Spin traps: in vitro toxicity and stability of radical adducts.

    Science.gov (United States)

    Khan, Nadeem; Wilmot, Carmen M; Rosen, Gerald M; Demidenko, Eugene; Sun, Jie; Joseph, Joy; O'Hara, Julia; Kalyanaraman, B; Swartz, Harold M

    2003-06-01

    We have evaluated the effects of DMPO, CMPO, EMPO, BMPO, and DEPMPO on functioning CHO cells and the stability of the radical adducts in the presence of cells. The potential toxic effects of the spin traps were measured by two estimates of cell viability (trypan blue exclusion and colony formation) and one of cell function (rate of oxygen consumption). We also studied the effects of the spin traps on colony formation in a second cell line, 9L tumor cells. Toxicity varied with the type of cell line and the parameter that was measured. In aqueous solutions the order of stability for all spin adducts was SO(3) > OH > CH(3), while in cell suspensions it was SO(3) > OH approximately CH(3). The radical adducts of the new spin traps have significantly increased stability as compared to DMPO. These results indicate that the new spin traps potentially offer increased stability of spin adducts in functioning cells. It also is clear that it is necessary to carry out appropriate studies of the stability and toxicity in the system that is to be studied for any particular use of these spin traps. It then should be feasible to select the spin trap(s) best suited for the proposed study.

  14. Photolysis and thermolysis of platinum(IV) 2,2'-bipyridine complexes lead to identical platinum(II)-DNA adducts.

    Science.gov (United States)

    Loup, Christophe; Tesouro Vallina, Ana; Coppel, Yannick; Létinois, Ulla; Nakabayashi, Yasuo; Meunier, Bernard; Lippert, Bernhard; Pratviel, Geneviève

    2010-10-04

    Two Pt(IV) and two Pt(II) complexes containing a 2,2'-bipyridine ligand were treated with a short DNA oligonucleotide under light irradiation at 37°C or in the dark at 37 and 50°C. Photolysis and thermolysis of the Pt(IV) complexes led to spontaneous reduction of the Pt(IV) to the corresponding Pt(II) complexes and to binding of Pt(II) 2,2'-bipyridine complexes to N7 of guanine. When the reduction product was [Pt(bpy)Cl(2)], formation of bis-oligonucleotide adducts was observed, whereas [Pt(bpy)(MeNH(2))Cl](+) gave monoadducts, with chloride ligands substituted in both cases. Neither in the dark nor under light irradiation was the reductive elimination process of these Pt(IV) complexes accompanied by oxidative DNA damage. This work raises the question of the stability of photoactivatable Pt(IV) complexes toward moderate heating conditions.

  15. WH2 domain: a small, versatile adapter for actin monomers.

    Science.gov (United States)

    Paunola, Eija; Mattila, Pieta K; Lappalainen, Pekka

    2002-02-20

    The actin cytoskeleton plays a central role in many cell biological processes. The structure and dynamics of the actin cytoskeleton are regulated by numerous actin-binding proteins that usually contain one of the few known actin-binding motifs. WH2 domain (WASP homology domain-2) is a approximately 35 residue actin monomer-binding motif, that is found in many different regulators of the actin cytoskeleton, including the beta-thymosins, ciboulot, WASP (Wiskott Aldrich syndrome protein), verprolin/WIP (WASP-interacting protein), Srv2/CAP (adenylyl cyclase-associated protein) and several uncharacterized proteins. The most highly conserved residues in the WH2 domain are important in beta-thymosin's interactions with actin monomers, suggesting that all WH2 domains may interact with actin monomers through similar interfaces. Our sequence database searches did not reveal any WH2 domain-containing proteins in plants. However, we found three classes of these proteins: WASP, Srv2/CAP and verprolin/WIP in yeast and animals. This suggests that the WH2 domain is an ancient actin monomer-binding motif that existed before the divergence of fungal and animal lineages.

  16. Microstructure Control in the emulsion polymerization of fluorinated monomers

    Energy Technology Data Exchange (ETDEWEB)

    Apostolo, Marco [Ausimont R and D, Bollate (Italy); Morbidelli, Massimo [ETH Zentrum, Zuerich (Switzerland)

    1997-03-01

    In this paper a mathematical model able to evaluate the microstructure of fluorinated polymers is presented. The model uses the pseudo-homo polymerization approach to describe the kinetic evolution of polymerization reactions involving any number of monomer species. The molecular weight distribution is evaluated combining the classical leading moments method with a recently proposed model based on the numerical fractionation technique.

  17. Synthesis of a benzoxazine monomer containing maleimide and allyloxy groups

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A novel benzoxazine monomer 3-(4-allyloxy)phenyl-3,4-dihydro-2H-6-(N-maleimido)-1,3-benzoxazine (AMB) was synthesized and structure was confirmed by FT-IR, 1H NMR. Thermal analysis (DSC) of AMB showed the introduction of allyloxy group decreased melting point and exhibited a narrow and symmetric curing exothermic window.

  18. Influence of the Diene Monomer on Devulcanization of EPDM Rubber

    NARCIS (Netherlands)

    Verbruggen, M.A.L.; van der Does, L.; Noordermeer, Jacobus W.M.; van Duin, M.

    2008-01-01

    Ethylene–propylene–diene rubbers (EPDM) with 2-ethylidene-5-norbornene (ENB), dicyclopentadiene (DCPD), and 1,4-hexadiene (HD) as third monomers have been vulcanized with peroxide and with a conventional sulfur vulcanization recipe, and their devulcanization was subsequently investigated for

  19. Epoxy resin monomers with reduced skin sensitizing potency.

    Science.gov (United States)

    O'Boyle, Niamh M; Niklasson, Ida B; Tehrani-Bagha, Ali R; Delaine, Tamara; Holmberg, Krister; Luthman, Kristina; Karlberg, Ann-Therese

    2014-06-16

    Epoxy resin monomers (ERMs), especially diglycidyl ethers of bisphenol A and F (DGEBA and DGEBF), are extensively used as building blocks for thermosetting polymers. However, they are known to commonly cause skin allergy. This research describes a number of alternative ERMs, designed with the aim of reducing the skin sensitizing potency while maintaining the ability to form thermosetting polymers. The compounds were designed, synthesized, and assessed for sensitizing potency using the in vivo murine local lymph node assay (LLNA). All six epoxy resin monomers had decreased sensitizing potencies compared to those of DGEBA and DGEBF. With respect to the LLNA EC3 value, the best of the alternative monomers had a value approximately 2.5 times higher than those of DGEBA and DGEBF. The diepoxides were reacted with triethylenetetramine, and the polymers formed were tested for technical applicability using thermogravimetric analysis and differential scanning calorimetry. Four out of the six alternative ERMs gave polymers with a thermal stability comparable to that obtained with DGEBA and DGEBF. The use of improved epoxy resin monomers with less skin sensitizing effects is a direct way to tackle the problem of contact allergy to epoxy resin systems, particularly in occupational settings, resulting in a reduction in the incidence of allergic contact dermatitis.

  20. Aggregation processes with catalysis-driven monomer birth/death

    Institute of Scientific and Technical Information of China (English)

    Chen Yu; Han An-Jia; Ke Jian-Hong; Lin Zhen-Quan

    2006-01-01

    We propose two solvable cluster growth models, in which an irreversible aggregation spontaneously occurs between any two clusters of the same species; meanwhile, monomer birth or death of species A occurs with the help of species B. The system with the size-dependent monomer birth/death rate kernel K(i,j) = Jijv is then investigated by means of the mean-field rate equation. The results show that the kinetic scaling behaviour of species A depends crucially on the value of the index v. For the model with catalysis-driven monomer birth, the cluster-mass distribution of species A obeys the conventional scaling law in the v ≤ 0 case, while it satisfies a generalized scaling form in the v>0 case; moreover, the total mass of species A is a nonzero value in the v< 0 case while it grows continuously with time in the v>0 case. For the model with catalysis-driven monomer death, the cluster-mass distribution also approaches the conventional scaling form in the v < 0 case, while the conventional scaling description of the system breaks down in the v ≥ 0 case. Additionally, the total mass of species A retains a nonzero quantity in the v <0 case, but it decreases to zero with time in the v ≥ 0 case.

  1. Base-catalyzed depolymerization of lignin : separation of monomers

    Energy Technology Data Exchange (ETDEWEB)

    Vigneault, A. [Sherbrooke Univ., PQ (Canada). Dept. of Chemical Engineering; Johnson, D.K. [National Renewable Energy Laboratory, Golden, CO (United States); Chornet, E. [Sherbrooke Univ., PQ (Canada). Dept. of Chemical Engineering; National Renewable Energy Laboratory, Golden, CO (United States)

    2007-12-15

    Biofuels produced from residual lignocellulosic biomass range from ethanol to biodiesel. The use of lignin for the production of alternate biofuels and green chemicals has been studied with particular emphasis on the structure of lignin and its oxyaromatic nature. In an effort to fractionate lignocellulosic biomass and valorize specific constitutive fractions, the authors developed a strategy for the separation of 12 added value monomers produced during the hydrolytic base catalyzed depolymerization (BCD) of a Steam Exploded Aspen Lignin. The separation strategy was similar to vanillin purification to obtain pure monomers, but combining more steps after the lignin depolymerization such as acidification, batch liquid-liquid-extraction (LLE), followed by vacuum distillation, liquid chromatography (LC) and crystallization. The purpose was to develop basic data for an industrial size process flow diagram, and to evaluate both the monomer losses during the separation and the energy requirements. Experimentally testing of LLE, vacuum distillation and flash LC in the laboratory showed that batch vacuum distillation produced up to 4 fractions. Process simulation revealed that a series of 4 vacuum distillation columns could produce 5 distinct monomer streams, of which 3 require further chromatography and crystallization operations for purification. 22 refs., 4 tabs., 8 figs.

  2. Influence of the diene monomer on devulcanization of EPDM rubber

    NARCIS (Netherlands)

    Verbruggen, M.; Does, van der L.; Noordermeer, J.W.M.; Duin, van M.

    2008-01-01

    Ethylene–propylene–diene rubbers (EPDM) with 2-ethylidene-5-norbornene (ENB), dicyclopentadiene (DCPD), and 1,4-hexadiene (HD) as third monomers have been vulcanized with peroxide and with a conventional sulfur vulcanization recipe, and their devulcanization was subsequently investigated for recycli

  3. Therapy-induced carboplatin-DNA adduct levels in human ovarian tumours in relation to assessment of adduct measurement in mouse tissues.

    Science.gov (United States)

    Jarvis, Ian W H; Meczes, Emma L; Thomas, Huw D; Edmondson, Richard J; Veal, Gareth J; Boddy, Alan V; Ottley, Christopher J; Pearson, D Graham; Tilby, Michael J

    2012-01-01

    Despite an increasing understanding of the molecular mechanisms by which platinum drug DNA adducts interact with cellular processes, the relationship between adduct formation in tumours and clinical response remains unclear. We have determined carboplatin-DNA adduct levels in biopsies removed from ovarian cancer patients following treatment. Reliability of DNA adduct measurements in tissues samples were assessed using experimental animals. Platinum-DNA adduct levels were measured using inductively coupled plasma mass spectrometry (ICP-MS) and plasma drug concentrations determined by atomic absorption spectrometry (AAS). Adduct levels in tissues and plasma pharmacokinetics were determined in Balb/c mice exposed to platinum drugs. Comparisons of adduct levels in tumour and normal tissue were made in nu/nu mice carrying human neuroblastoma xenografts. At 30 min post-cisplatin administration, adduct levels in DNA from kidney and liver were approximately 10- and 6-fold higher than spleen or tumour. By 60 min, levels in liver and kidney, but not spleen or tumour, had fallen considerably. Carboplatin showed high adduct levels only in kidney. Adduct levels in tumour xenografts were comparable to those induced in vitro with similar drug exposures. In clinical samples removed 6h after drug administration, adduct levels ranged from 1.9 to 4.3 and 0.2 to 3.6 nmol Pt/g DNA for tumour biopsies and peripheral blood mononuclear cells, respectively. No correlation was apparent between these two data sets. The present results demonstrate that reliable measurements of adducts in clinical tumours are feasible. Future results should provide insight into drug resistance.

  4. Photochemistry of psoralen-DNA adducts, biological effects of psoralen-DNA adducts, applications of psoralen-DNA photochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Yun-bo

    1988-03-01

    This thesis consists of three main parts and totally eight chapters. In Part I, The author will present studies on the photochemistry of psoralen-DNA adducts, specifically, the wavelength dependencies for the photoreversals of thymidine-HMT (4'-hydroxymethyl-4, 5', 8-trimenthylpsoralen) monoadducts and diadduct and the same adducts incorporated in DNA helices and the wavelength dependecies for the photocrossslinking of thymidine-HMT monoadducts in double-stranded helices. In Part II, The author will report some biological effects of psoralen-DNA adducts, i.e., the effects on double-stranded DNA stability, DNA structure, and transcription by E. coli and T7 RNA polymerases. Finally, The author will focus on the applications of psoralen-DNA photochemistry to investigation of protein-DNA interaction during transcription, which includes the interaction of E. coli and T7 RNA polymerases with DNA in elongation complexes arrested at specific psoralen-DNA adduct sites as revealed by DNase I footprinting experiments. 123 refs., 52 figs., 12 tabs.

  5. Immunochemical detection of sulfur mustard-adducts with DNA and proteins: Exploratory research on adducts with proteins

    NARCIS (Netherlands)

    Schans, G.P. van der; Noort, D.; Mars-Groenendijk, R.H.; Dijk-Knijnenburg, H.C.M. van; Fidder, A.; Jong, L.P.A. de; Benschop, H.P.

    2000-01-01

    We have developed two modes of a standard operating procedure (SOP) for immunochemical detection of sulfur mustard adducts to DNA in human blood and skin. In the shortened mode data could be generated within 9 h after in vitro exposure of human blood to > 1 μM sulfur mustard. The sensitive mode allo

  6. Chloroethyinitrosourea-derived ethano cytosine and adenine adducts are substrates for escherichia coli glycosylases excising analogous etheno adducts

    Energy Technology Data Exchange (ETDEWEB)

    Guliaev, Anton B.; Singer, B.; Hang, Bo

    2004-05-05

    Exocyclic ethano DNA adducts are saturated etheno ring derivatives formed mainly by therapeutic chloroethylnitrosoureas (CNUs), which are also mutagenic and carcinogenic. In this work, we report that two of the ethano adducts, 3,N{sup 4}-ethanocytosine (EC) and 1,N{sup 6}-ethanoadenine (EA), are novel substrates for the Escherichia coli mismatch-specific uracil-DNA glycosylase (Mug) and 3-methyladenine DNA glycosylase II (AlkA), respectively. It has been shown previously that Mug excises 3,N{sup 4}-ethenocytosine ({var_epsilon}C) and AlkA releases 1,N{sup 6}-ethenoadenine ({var_epsilon}A). Using synthetic oligonucleotides containing a single ethano or etheno adduct, we found that both glycosylases had a {approx}20-fold lower excision activity toward EC or EA than that toward their structurally analogous {var_epsilon}C or {var_epsilon}A adduct. Both enzymes were capable of excising the ethano base paired with any of the four natural bases, but with varying efficiencies. The Mug activity toward EC could be stimulated by E. coli endonuclease IV and, more efficiently, by exonuclease III. Molecular dynamics (MD) simulations showed similar structural features of the etheno and ethano derivatives when present in DNA duplexes. However, also as shown by MD, the stacking interaction between the EC base and Phe 30 in the Mug active site is reduced as compared to the {var_epsilon}C base, which could account for the lower EC activity observed in this study.

  7. Synthesis, structure, and reactivity of diazene adducts: isolation of iso-diazene stabilized as a borane adduct.

    Science.gov (United States)

    Reiß, Fabian; Schulz, Axel; Villinger, Alexander

    2014-09-08

    This work describes the synthesis and full characterization of a series of GaCl3 and B(C6 F5 )3 adducts of diazenes R(1) NNR(2) (R(1) =R(2) =Me3 Si, Ph; R(1) =Me3 Si, R(2) =Ph). Trans-PhNNPh forms a stable adduct with GaCl3 , whereas no adduct, but instead a frustrated Lewis acid-base pair is formed with B(C6 F5 )3 . The cis-PhNNPh⋅B(C6 F5 )3 adduct could only be isolated when UV light was used, which triggers the isomerization from trans- to cis-PhNNPh, which provides more space for the bulky borane. Treatment of trans-PhNNSiMe3 with GaCl3 led to the expected trans-PhNNSiMe3 ⋅GaCl3 adduct but the reaction with B(C6 F5 )3 triggered a 1,2-Me3 Si shift, which resulted in the formation of a highly labile iso-diazene, Me3 Si(Ph)NN; stabilized as a B(C6 F5 )3 adduct. Trans-Me3 SiNNSiMe3 forms a labile cis-Me3 SiNNSiMe3 ⋅B(C6 F5 )3 adduct, which isomerizes to give the transient iso-diazene species (Me3 Si)2 NN⋅B(C6 F5 )3 upon heating. Both iso-diazene species insert easily into one BC bond of B(C6 F5 )3 to afford hydrazinoboranes. All new compounds were fully characterized by means of X-ray crystallography, vibrational spectroscopy, CHN analysis, and NMR spectroscopy. All compounds were further investigated by DFT and the bonding situation was assessed by natural bond orbital (NBO) analysis.

  8. Detection of Adriamycin-DNA adducts by accelerator mass spectrometry at clinically relevant Adriamycin concentrations.

    Science.gov (United States)

    Coldwell, Kate E; Cutts, Suzanne M; Ognibene, Ted J; Henderson, Paul T; Phillips, Don R

    2008-09-01

    Limited sensitivity of existing assays has prevented investigation of whether Adriamycin-DNA adducts are involved in the anti-tumour potential of Adriamycin. Previous detection has achieved a sensitivity of a few Adriamycin-DNA adducts/10(4) bp DNA, but has required the use of supra-clinical drug concentrations. This work sought to measure Adriamycin-DNA adducts at sub-micromolar doses using accelerator mass spectrometry (AMS), a technique with origins in geochemistry for radiocarbon dating. We have used conditions previously validated (by less sensitive decay counting) to extract [(14)C]Adriamycin-DNA adducts from cells and adapted the methodology to AMS detection. Here we show the first direct evidence of Adriamycin-DNA adducts at clinically-relevant Adriamycin concentrations. [(14)C]Adriamycin treatment (25 nM) resulted in 4.4 +/- 1.0 adducts/10(7) bp ( approximately 1300 adducts/cell) in MCF-7 breast cancer cells, representing the best sensitivity and precision reported to date for the covalent binding of Adriamycin to DNA. The exceedingly sensitive nature of AMS has enabled over three orders of magnitude increased sensitivity of Adriamycin-DNA adduct detection and revealed adduct formation within an hour of drug treatment. This method has been shown to be highly reproducible for the measurement of Adriamycin-DNA adducts in tumour cells in culture and can now be applied to the detection of these adducts in human tissues.

  9. Chloride on the Move

    KAUST Repository

    Li, Bo

    2017-01-09

    Chloride (Cl−) is an essential plant nutrient but under saline conditions it can accumulate to toxic levels in leaves; limiting this accumulation improves the salt tolerance of some crops. The rate-limiting step for this process – the transfer of Cl− from root symplast to xylem apoplast, which can antagonize delivery of the macronutrient nitrate (NO3−) to shoots – is regulated by abscisic acid (ABA) and is multigenic. Until recently the molecular mechanisms underpinning this salt-tolerance trait were poorly defined. We discuss here how recent advances highlight the role of newly identified transport proteins, some that directly transfer Cl− into the xylem, and others that act on endomembranes in ‘gatekeeper’ cell types in the root stele to control root-to-shoot delivery of Cl−.

  10. Benzalkonium chloride and glaucoma.

    Science.gov (United States)

    Rasmussen, Carol A; Kaufman, Paul L; Kiland, Julie A

    2014-01-01

    Glaucoma patients routinely take multiple medications, with multiple daily doses, for years or even decades. Benzalkonium chloride (BAK) is the most common preservative in glaucoma medications. BAK has been detected in the trabecular meshwork (TM), corneal endothelium, lens, and retina after topical drop installation and may accumulate in those tissues. There is evidence that BAK causes corneal and conjunctival toxicity, including cell loss, disruption of tight junctions, apoptosis and preapoptosis, cytoskeleton changes, and immunoinflammatory reactions. These same effects have been reported in cultured human TM cells exposed to concentrations of BAK found in common glaucoma drugs and in the TM of primary open-angle glaucoma donor eyes. It is possible that a relationship exists between chronic exposure to BAK and glaucoma. The hypothesis that BAK causes/worsens glaucoma is being tested experimentally in an animal model that closely reflects human physiology.

  11. Polymer as a function of monomer: Analytical quantum modeling

    CERN Document Server

    Nakhaee, Mohammad

    2016-01-01

    To identify an analytical relation between the properties of polymers and their's monomer a Metal-Molecule-Metal (MMM) junction has been presented as an interesting and widely used object of research in which the molecule is a polymer which is able to conduct charge. The method used in this study is based on the Green's function approach in the tight-binding approximation using basic properties of matrices. For a polymer base MMM system, transmission, density of states (DOS) and local density of states (LDOS) have been calculated as a function of the hamiltonian of the monomer. After that, we have obtained a frequency for LDOS variations in pass from a subunit to the next one which is a function of energy.

  12. Formaldehyde stabilization facilitates lignin monomer production during biomass depolymerization.

    Science.gov (United States)

    Shuai, Li; Amiri, Masoud Talebi; Questell-Santiago, Ydna M; Héroguel, Florent; Li, Yanding; Kim, Hoon; Meilan, Richard; Chapple, Clint; Ralph, John; Luterbacher, Jeremy S

    2016-10-21

    Practical, high-yield lignin depolymerization methods could greatly increase biorefinery productivity and profitability. However, development of these methods is limited by the presence of interunit carbon-carbon bonds within native lignin, and further by formation of such linkages during lignin extraction. We report that adding formaldehyde during biomass pretreatment produces a soluble lignin fraction that can be converted to guaiacyl and syringyl monomers at near theoretical yields during subsequent hydrogenolysis (47 mole % of Klason lignin for beech and 78 mole % for a high-syringyl transgenic poplar). These yields were three to seven times those obtained without formaldehyde, which prevented lignin condensation by forming 1,3-dioxane structures with lignin side-chain hydroxyl groups. By depolymerizing cellulose, hemicelluloses, and lignin separately, monomer yields were between 76 and 90 mole % for these three major biomass fractions. Copyright © 2016, American Association for the Advancement of Science.

  13. Dynamics of Aggregate Growth Through Monomer Birth and Death

    Institute of Scientific and Technical Information of China (English)

    KE Jian-Hong; LIN Zhen-Quan

    2004-01-01

    @@ We investigate the kinetic behaviour of the growth of aggregates through monomer birth and death and propose a simple model with the rate kernels K(k) ∝ ku and K′(k) ∝ kv at which the aggregate Ak of size k respectively yields and loses a monomer. For the symmetrical system with K(k) = K′(k), the aggregate size distribution approaches the conventional scaling form in the case of u < 2, while the system may undergo a gelation-like transition in the u > 2 case. Moreover, the typical aggregate size S(t) grows as t1/(2-u) in the u < 2 case and increases exponentially with time in the u = 2 case. We also investigate several solvable systems with asymmetrical rate kernels and find that the scaling of the aggregate size distribution may break down in most cases.

  14. A convenient and highly efficient synthesis of one kind of peptide nucleic acid monomer

    Directory of Open Access Journals (Sweden)

    Xuemei Tang

    2012-12-01

    Full Text Available S-Thyminyl-L-cysteine methyl ester hydrochloride (compound 1, a non-classical peptide nucleic acid monomer, was synthesized through the key intermediate, N-tert- butoxycarbonyl-S-thyminyl-L-cysteine (compound 3, which afforded from the reaction of S-thyminyl-L-cysteine hydrochloride (compound 2 with di-tert-butyl dicarbonate (Boc2O. This was followed by the esterification and deprotection of compound 3 at an overall yield of 82%. The mixture of thionyl chloride and methanol was found as an efficient reagent for simultaneous deprotection of tert-butoxycarbonyl (Boc group and esterification of carboxy group of compound 3. This high-yield two-step method was also applied to other analogues of compound 1 successfully. The chemical structures of four new compounds (5a-5d were confirmed by 1H NMR and 13C NMR.DOI: http://dx.doi.org/10.4314/bcse.v26i3.10

  15. 1 : 2 Adducts of copper(I) halides with 1,2-bis(di-2-pyridylphosphino)ethane: solid state and solution structural studies and antitumour activity.

    Science.gov (United States)

    Bowen, Richard J; Navarro, Maribel; Shearwood, Anne-Marie J; Healy, Peter C; Skelton, Brian W; Filipovska, Aleksandra; Berners-Price, Susan J

    2009-12-28

    The 1 : 2 adducts of copper(I) halides with 1,2-bis(2-pyridylphosphino)ethane (d2pype) have been synthesized and solution properties characterized by variable temperature (1)H, (31)P and (65)Cu NMR spectroscopy. Single-crystal structure determinations for the chloride, bromide and iodide complexes show these to crystallize from acetonitrile in the triclinic space group P1 as isostructural centrosymmetric dimers [(d2pype)Cu(mu-d2pype)(2)Cu(d2pype)]X(2).(solvent) with a approximately 12.6, b approximately 12.7, c approximately 15.3 A, alpha approximately 84, beta approximately 67, gamma approximately 84 degrees. In contrast to the analogous AuCl:2(d2pype) and AgNO(3):2(d2pype) adducts, in solution these CuX:2(d2pype) adducts (where X = Cl, Br and I) exist almost exclusively as bis-chelated monomeric [Cu(d2pype)(2)]X; evidence for an equilibrium between monomeric and dimeric forms is detected only for the CuCl adduct in methanol. Cytotoxicity studies in two human breast cancer lines and two matched liver progenitor cell lines indicate that [Cu(d2pype)(2)]Cl is non selectively toxic to both non-tumourigenic and tumourigenic cells. However, the analogous Au(I) compound [Au(d2pype)(2)]Cl, is toxic to highly tumourigenic cells and more selective in its toxicity to tumourigenic cells compared to non-tumourigenic cells. The significance of these results to the further development of selective, mitochondria-targeted, Au(I) antitumour complexes is discussed.

  16. Novel fluoro-carbon functional monomer for dental bonding.

    Science.gov (United States)

    Yoshihara, K; Yoshida, Y; Hayakawa, S; Nagaoka, N; Kamenoue, S; Okihara, T; Ogawa, T; Nakamura, M; Osaka, A; Van Meerbeek, B

    2014-02-01

    Among several functional monomers, 10-methacryloxydecyl dihydrogen phosphate (10-MDP) bonded most effectively to hydroxyapatite (HAp). However, more hydrolysis-resistant functional monomers are needed to improve bond durability. Here, we investigated the adhesive potential of the novel fluoro-carbon functional monomer 6-methacryloxy-2,2,3,3,4,4,5,5-octafluorohexyl dihydrogen phosphate (MF8P; Kuraray Noritake Dental Inc., Tokyo, Japan) by studying its molecular interaction with powder HAp using solid-state nuclear magnetic resonance ((1)H MAS NMR) and with dentin using x-ray diffraction (XRD) and by characterizing its interface ultrastructure at dentin using transmission electron microscopy (TEM). We further determined the dissolution rate of the MF8P_Ca salt, the hydrophobicity of MF8P, and the bond strength of an experimental MF8P-based adhesive to dentin. NMR confirmed chemical adsorption of MF8P onto HAp. XRD and TEM revealed MF8P_Ca salt formation and nano-layering at dentin. The MF8P_Ca salt was as stable as that of 10-MDP; MF8P was as hydrophobic as 10-MDP; a significantly higher bond strength was recorded for MF8P than for 10-MDP. In conclusion, MF8P chemically bonded to HAp. Despite its shorter size, MF8P possesses characteristics similar to those of 10-MDP, most likely to be associated with the strong chemical bond between fluorine and carbon. Since favorable bond strength to dentin was recorded, MF8P can be considered a good candidate functional monomer for bonding.

  17. Syntheses of New Functionalized Monomers for π-Conjugated Polymers

    Institute of Scientific and Technical Information of China (English)

    D.VYPRACHTICKY; V.CIMRO; P.PAVLKOVA; I.KMNEK

    2007-01-01

    1 Results Tailored monomers based on the activated esters of 2,5-dibromobenzoic (sulfonic) acid derivatives, the 3-substituted 2,5-dibromothiophenes, the 9-substituted 2,7-dibromocarbazoles, and on the brominated 1,10-phenanthrolines suitable for Suzuki, Yamamoto or Grignard metathesis (GRIM) coupling reactions were synthesized and characterized by melting point, elemental analysis, 1H NMR, FTIR and TLC. The Horner-Wadsworth-Emmons reaction mechanism was utilized for the preparation of the 3-[2-(pyren-1...

  18. Development of high performance vinyl acetate monomer (VAM) catalysts

    OpenAIRE

    2009-01-01

    The focus of this study was to develop high performance catalysts for the synthesis of vinyl acetate monomer (VAM). By systematic variation of different preparation parameters a multitude of shell catalysts consisting of PdAu nanoparticles supported on a bentonite carrier was explored. In order to investigate the influence of these alterations on catalytic performance, a catalyst classification was accomplished in a high-throughput Temkin test unit by comparison with a highly efficient commer...

  19. Synthesis of a new aromatic dianhydride monomer and related polyimide

    Institute of Scientific and Technical Information of China (English)

    Yun Xia Wei; Ming Guang Ma; Guo Hu Zhao; Sheng Ying Li; Ming Kai Chen

    2009-01-01

    A novel aromatic dianhydride monomer,3,3'-oxybis[(3,4-dicarboxyphenoxy)phenol]dianhydride,was successfully synthe-sized in three steps using 3,3'-oxybis(phenol)as starting material,which was reacted with 4,4'-oxydianiline(ODA)via a conventional thermal or chemical imidization method to produce a new polyimide.The resulting polyimide exhibited excellent solubility,and film-forming capability.

  20. Enhancement in dose sensitivity of polymer gel dosimeters composed of radiation-crosslinked gel matrix and less toxic monomers

    Science.gov (United States)

    Hiroki, A.; Yamashita, S.; Taguchi, M.

    2015-01-01

    Polymer gel dosimeters based on radiation-crosslinked hydroxypropyl cellulose gel were prepared, which comprised 2-hydroxyethyl methacrylate (HEMA) and polyethylene glycol #400 dimethacrylate (9G) as less toxic monomers and tetrakis (hydroxymethyl) phosphonium chloride (THPC) as an antioxidant. The dosimeters exposed to 60Co γ-rays became cloudy at only 1 Gy. The irradiated dosimeters were optically analyzed by using a UV- vis spectrophotometer to evaluate dose response. Absorbance of the dosimeters linearly increased in the dose range from 0 to 10 Gy, in which dose sensitivity increased with increasing 9G concentration. The dose sensitivity of the dosimeters with 2 wt% HEMA and 3 wt% 9G was also enhanced by increment in THPC.

  1. Studies on the preparation of multi-monomer grafted PP by one-step extrusion and the blends with PVC

    Directory of Open Access Journals (Sweden)

    2008-01-01

    Full Text Available Firstly, a novel grafted polypropylene (PP was prepared by one step free-radical melt grafting way in a single-screw extruder. The results were shown that the addition of St to the melt-grafting system as a comonomer could significantly enhance MMA grafting degree onto PP and reduce the degradation of PP matrix by means of FTIR and MFR test, respectively. Then, the extruded multi-monomer grafted PP, as a component, directly blend with poly (vinyl chloride (PVC, named as gPP/PVC. The corresponding improved compatibility was examined. Comparison with pure PP/PVC blends, due to the addition of gPP, the tensile strengths of gPP/PVC blends increased significantly and the impact strengths were unchanged as those of pure PP/PVC blends. The DSC results also suggested that the compatibility of PP/PVC blends were improved largely.

  2. Exposure of bus and taxi drivers to urban air pollutants as measured by DNA and protein adducts

    DEFF Research Database (Denmark)

    Hemminki, K.; Zhang, L.F.; Krüger, J.;

    1994-01-01

    Urinary 1-hydroxypyrene, lymphocyte DNA adducts, serum protein-bound PAH and hemoglobin-bound alkene adducts were analysed from 4 groups of non-smoking men: urban and suburban bus drivers, taxi drivers and suburban controls. The only differences between the groups were in DNA adducts between...... suburban bus drivers and controls, and in DNA adduct and plasma protein PAH-adducts between taxi drivers and controls....

  3. Crystal Structure of Ethanolamine 5-Nitrosalicylic Acid Organic Adduct

    Institute of Scientific and Technical Information of China (English)

    金轶; 车云霞; 魏荣敏; 郑吉民

    2004-01-01

    The title adduct (C18H24N4O12, Mr = 488.41) crystallizes in monoclinic, space group P21/c with a = 4.0514(19), b = 25.193(11), c = 10.751(5)(A), β = 95.070(8)o, V = 1093.0(9)(A)3, Z = 4, Dc = 1.484 g/cm3, F(000) = 512, μ(MoKα) = 1.26 cm-1, T = 293 K, the final R = 0.0593 and wR = 0.0862 for 956 observed reflections with I > 2(I). The compound is a 1:1 adduct of ethanolamine and 5-nitrosalicylic acid. The nitrogen atom of ethanolamine is protonated. In this crystal there exist a number of hydrogen bonds which link the ethanolamine and 5-nitrosalicylic acid molecules to form a three-dimensional infinite network structure.

  4. Investigation of surface modifications in ethylene propylene diene monomer (EPDM) rubber due to tracking under a.c. and d.c. voltages

    Indian Academy of Sciences (India)

    R Sarathi; Uma Maheswar Rao

    2001-12-01

    In the present work, tracking phenomena has been studied with the ethylene propylene diene monomer (EPDM) material under the a.c. and d.c. voltages, with ammonium chloride/acid rain solution as the contaminant. It is noticed that the tracking time depends on the conductivity and flow rate of the contaminant. The physico-chemical analyses viz. wide angle X-ray diffraction (WAXD), thermo-gravimetric differential thermal analysis (TG-DTA) and the differential scanning calorimetry (DSC) studies, were carried out and it was concluded that the tracking process is a surface degradation process. The tracking time is different for a.c. and d.c. voltages.

  5. NEW HYDROGENOXALATO ADDUCTS AND MALONATO COMPLEX: SYNTHESIS AND SPECTROSCOPIC STUDIES

    OpenAIRE

    2014-01-01

    Two new hydrogenoxalato and one malonato adduct and complex have been synthesized and studied by infrared and NMR spectroscopies. The suggested structures are discrete, the hydrogenoxalate behaving as a monodentate ligand or only involved in hydrogen bonding, the environment around the tin (IV) centre being tetrahedral or trigonal bipyramidal. The malonate anion is a monodentate ligand. In all the suggested structures, when extra hydrogen bonds are considered, supramolecular architectures are...

  6. NEW HYDROGENOXALATO ADDUCTS AND MALONATO COMPLEX: SYNTHESIS AND SPECTROSCOPIC STUDIES

    Directory of Open Access Journals (Sweden)

    MOUHAMADOU BIRAME DIOP

    2014-08-01

    Full Text Available Two new hydrogenoxalato and one malonato adduct and complex have been synthesized and studied by infrared and NMR spectroscopies. The suggested structures are discrete, the hydrogenoxalate behaving as a monodentate ligand or only involved in hydrogen bonding, the environment around the tin (IV centre being tetrahedral or trigonal bipyramidal. The malonate anion is a monodentate ligand. In all the suggested structures, when extra hydrogen bonds are considered, supramolecular architectures are obtained.

  7. SOME NEW SULFONATO ADDUCT: SYNTHESIS AND SPECTROSCOPIC STUDIES

    Directory of Open Access Journals (Sweden)

    MOUHAMADOU BIRAME DIOP

    2015-02-01

    Full Text Available Three new adducts have been synthesized and studied by infrared and NMR spectroscopies. The suggested structures are discrete with a pyridine -3- sulfonate acting as a tri O-chelating and N-donor or as a non σ coordinating ligand, a 4-aminobenzenesulfonate behaving as a monodentate O-donor, the environments around the tin centre being tetrahedral, octahedral or seven coordinated. In all the studied compounds, supramolecular architectures are obtained when hydrogen bonds are considered.

  8. NEW HALO- AND ORGANOTIN (IV PHENYLARSENIATO ADDUCTS AND DERIVATIVES

    Directory of Open Access Journals (Sweden)

    BOCAR TRAORE

    2013-12-01

    Full Text Available Four new phenylarseniato adducts and organotin derivatives have been synthesized and studied by infrared. The suggested structures are polymeric, (SnX4; X = Cl, Br and SnPh3Cl while being discrete for SnPh2Cl(PhAsO3H2isoBu2NH2. When OH- - - Cl, NH - - - O or NH- - -Cl hydrogen bonds are involved, supramolecular architectures are obtained.

  9. PHOSPHATO AND PHOSPHONATO ADDUCTS: SYNTHESIS AND SPECTROSCOPIC STUDY

    Directory of Open Access Journals (Sweden)

    Mouhamadou Birame Diop

    2014-05-01

    Full Text Available Two new adducts have been synthesized and studied by infrared and NMR spectroscopy. The suggested structures are discrete or of infinite chain type with a phosphate behaving as a bidentate ligand, a phosphonate acting as a monodentate ligand, the environments around the tin centre being tetrahedral or trigonal bipyramidal. In all the studied compounds, supramolecular architectures are obtained when hydrogen bonds are considered.

  10. Protein tyrosine adduct in humans self-poisoned by chlorpyrifos

    Energy Technology Data Exchange (ETDEWEB)

    Li, Bin, E-mail: binli@unmc.edu [Eppley Institute, University of Nebraska Medical Center, Omaha, NE 68198-5950 (United States); Eyer, Peter, E-mail: peter.eyer@lrz.uni-muenchen.de [Walther-Straub-Institut Für Pharmakologie und Toxikologie, Ludwig-Maximilians-Universität München, 80336 München (Germany); Eddleston, Michael, E-mail: M.Eddleston@ed.ac.uk [Clinical Pharmacology Unit, University of Edinburgh, Edinburgh (United Kingdom); Jiang, Wei, E-mail: wjiang@unmc.edu [Eppley Institute, University of Nebraska Medical Center, Omaha, NE 68198-5950 (United States); Schopfer, Lawrence M., E-mail: lmschopf@unmc.edu [Eppley Institute, University of Nebraska Medical Center, Omaha, NE 68198-5950 (United States); Lockridge, Oksana, E-mail: olockrid@unmc.edu [Eppley Institute, University of Nebraska Medical Center, Omaha, NE 68198-5950 (United States)

    2013-06-15

    Studies of human cases of self-inflicted poisoning suggest that chlorpyrifos oxon reacts not only with acetylcholinesterase and butyrylcholinesterase but also with other blood proteins. A favored candidate is albumin because in vitro and animal studies have identified tyrosine 411 of albumin as a site covalently modified by organophosphorus poisons. Our goal was to test this proposal in humans by determining whether plasma from humans poisoned by chlorpyrifos has adducts on tyrosine. Plasma samples from 5 self-poisoned humans were drawn at various time intervals after ingestion of chlorpyrifos for a total of 34 samples. All 34 samples were analyzed for plasma levels of chlorpyrifos and chlorpyrifos oxon (CPO) as a function of time post-ingestion. Eleven samples were analyzed for the presence of diethoxyphosphorylated tyrosine by mass spectrometry. Six samples yielded diethoxyphosphorylated tyrosine in pronase digests. Blood collected as late as 5 days after chlorpyrifos ingestion was positive for CPO-tyrosine, consistent with the 20-day half-life of albumin. High plasma CPO levels did not predict detectable levels of CPO-tyrosine. CPO-tyrosine was identified in pralidoxime treated patients as well as in patients not treated with pralidoxime, indicating that pralidoxime does not reverse CPO binding to tyrosine in humans. Plasma butyrylcholinesterase was a more sensitive biomarker of exposure than adducts on tyrosine. In conclusion, chlorpyrifos oxon makes a stable covalent adduct on the tyrosine residue of blood proteins in humans who ingested chlorpyrifos. - Highlights: • Chlorpyrifos-poisoned patients have adducts on protein tyrosine. • Diethoxyphosphate-tyrosine does not lose an alkyl group. • Proteins in addition to AChE and BChE are modified by organophosphates.

  11. Ion Pairs or Neutral Molecule Adducts? Cooperativity in Hydrogen Bonding

    Science.gov (United States)

    DeKock, Roger L.; Schipper, Laura A.; Dykhouse, Stephanie C.; Heeringa, Lee P.; Brandsen, Benjamin M.

    2009-01-01

    We performed theoretical studies on the systems NH[subscript 3] times HF times mH[subscript 2]O, NH[subscript 3] times HCl times mH[subscript 2]O, with m = 0, 1, 2, and 6. The molecules with m = 0 form hydrogen-bonded adducts with little tendency to form an ion-pair structure. The molecule NH[subscript 3] times HCl times H[subscript 2]O cannot be…

  12. Fluorescence of Phytochrome Adducts with Synthetic Locked Chromophores*

    OpenAIRE

    Zienicke, Benjamin; Chen, Li-Yi; Khawn, Htoi; Hammam, Mostafa A. S.; Kinoshita, Hideki; Reichert, Johannes; Ulrich, Anne S.; Inomata, Katsuhiko; Lamparter, Tilman

    2010-01-01

    We performed steady state fluorescence measurements with phytochromes Agp1 and Agp2 of Agrobacterium tumefaciens and three mutants in which photoconversion is inhibited. These proteins were assembled with the natural chromophore biliverdin (BV), with phycoerythrobilin (PEB), which lacks a double bond in the ring C-D-connecting methine bridge, and with synthetic bilin derivatives in which the ring C-D-connecting methine bridge is locked. All PEB and locked chromophore adducts are photoinactive...

  13. Synthesis and selenation of tandem multicomponent condensation adducts

    OpenAIRE

    Hua, Guoxiong; Du, Junyi; Fuller, Amy; Athukorala Arachchige, Kasun Sankalpa; Cordes, David Bradford; Slawin, Alexandra Martha Zoya; Woollins, J. Derek

    2015-01-01

    A number of four-component condensation adducts, which were readily obtained from one-pot reaction of aryl carboxylic acids, arylaldehydes, arylamines and c-hexylisocyanide, were treated with two equivalents of Woollins’ reagent leading to the formation of a series of novel selenoamides with one or two C=Se groups, or heterocyclic compounds such as 1,3-selenazole and 1,3-selenazolidin-5-one Postprint Peer reviewed

  14. Diagnosis and dosimetry of exposure to sulfur mustard: Development of a standard operating procedure for mass spectrometric analysis of haemoglobin adducts - Exploratory research on albumin and keratin adducts

    NARCIS (Netherlands)

    Noort, D.; Fidder, A.; Hulst, A.G.; Jong, L.P.A. de; Benschop, H.P.

    2000-01-01

    Experiments were carried out to develop a standard operating procedure for analysis of sulfur mustard adducts to the N-terminal valine in haemoglobin and to explore adduct formation with albumin and keratin. In the first approach, gas chromatography-negative chemical ionization/mass spectrometry (GC

  15. Diagnosis and dosimetry of exposure to sulfur mustard: Development of a standard operating procedure for hemoglobin adducts: Exploratory research on albumin and keratin adducts

    NARCIS (Netherlands)

    Noort, D.; Fidder, A.; Jong, L.P.A. de; Schans, G.P. van der; Benschop, H.P.

    2000-01-01

    A standard operating procedure (SOP) for determination of the sulfur mustard adduct to the N-terminal valine in hemoglobin was developed. By using this SOP, it was found that the Nterminal valine adduct in globin of hairless guinea pigs and marmosets which had been exposed to sulfur mustard (0.5 LD5

  16. Ortho-substituted triptycene-based diamines, monomers, and polymers, methods of making and uses thereof

    KAUST Repository

    Ghanem, Bader Saleh

    2017-04-13

    Described herein are ortho-dimethyl-substituted and tetramethyi-substituted triptycene-containing diamine monomers and microporous triptycene-based poiyimides and poiyamides, and methods of making the monomers and polymers.

  17. Thermally stable drilling fluid additive comprised of a copolymer of catechol-based monomer

    Energy Technology Data Exchange (ETDEWEB)

    Patel, A.D.

    1986-06-17

    A water soluble polymer is described having thermal stability and exhibiting utility as an aqueous drilling fluid additive comprising: (a) a major portion of a catechol based monomer; (b) a minor portion of a dicarboxylic acid monomer.

  18. Structural Characterization of Hydroxyl Radical Adducts in Aqueous Media

    Science.gov (United States)

    Janik, Ireneusz; Tripathi, G. N. R.

    2015-06-01

    The oxidation by the hydroxyl (OH) radical is one of the most widely studied reactions because of its central role in chemistry, biology, organic synthesis, and photocatalysis in aqueous environments, wastewater treatment, and numerous other chemical processes. Although the redox potential of OH is very high, direct electron transfer (ET) is rarely observed. If it happens, it mostly proceeds through the formation of elusive OH adduct intermediate which facilitates ET and formation of hydroxide anion. Using time resolved resonance Raman technique we structurally characterized variety of OH adducts to sulfur containing organic compounds, halide ions as well as some metal cations. The bond between oxygen of OH radical and the atom of oxidized molecule differs depending on the nature of solute that OH radical reacts with. For most of sulfur containing organics, as well as halide and pseudo-halide ions, our observation suggested that this bond has two-center three-electron character. For several metal aqua ions studied, the nature of the bond depends on type of the cation being oxidized. Discussion on spectral parameters of all studied hydroxyl radical adducts as well as the role solvent plays in their stabilization will be presented.

  19. Isolation of Cyclopropenylidene Lithium Adducts: The Weiss-Yoshida Reagent**

    Science.gov (United States)

    Lavallo, Vincent; Ishida, Yutaka; Donnadieu, Bruno; Bertrand, Guy

    2008-01-01

    A lithium-halogen exchange reaction occurs when the chloro[bis(diisopropylamino)]cyclopropenium tetrafluoroborate salt 1 (X = BF4) is treated with n-butyllithium. The resulting cyclopropenylidene-lithium adduct 3 has been isolated in 45% yield. In the solid state, this compound exists as a polymeric chain with an overall stoichiometry of two LiBF4 per carbene ligand. Addition of 12-crown-4-ether does not liberate the carbene from the lithium cation, but affords a monomeric tertiary complex (60% yield) that includes the crown ether. Moreover, complex 3 can also be synthesized by depro tonation of the bis(diisopropylamino)cyclopropenium tetrafluoroborate salt 2 (X = BF4) with n-butyllithium, whereas using potassium bis(trimethylsilyl)amide the free cyclopropenylidene was isolated in 53% yield. These results as whole seem to demonstrate that only certain counteranions allow for the isolation of cyclopropenylidene-lithium adducts, and only bases not containing lithium allow for the isolation of the free cyclopropenylidene. The former and the latter presumably prevented Weiss and Yoshida from isolating what would have been the first example of a stable carbene-lithium adduct and a free carbene, respectively. PMID:16986195

  20. Characterization of a Hemoglobin Adduct from Ethyl Vinyl Ketone Detected in Human Blood Samples.

    Science.gov (United States)

    Carlsson, Henrik; Motwani, Hitesh V; Osterman Golkar, Siv; Törnqvist, Margareta

    2015-11-16

    Electrophiles have the ability to form adducts to nucleophilic sites in proteins and DNA. Internal exposure to such compounds thus constitutes a risk for toxic effects. Screening of adducts using mass spectrometric methods by adductomic approaches offers possibilities to detect unknown electrophiles present in tissues. Previously, we employed untargeted adductomics to detect 19 unknown adducts to N-terminal valine in hemoglobin (Hb) in human blood. This article describes the characterization of one of these adducts, which was identified as the adduct from ethyl vinyl ketone (EVK). The mean adduct level was 40 ± 12 pmol/g Hb in 12 human blood samples; adduct levels from acrylamide (AA) and methyl vinyl ketone (MVK) were quantified for comparison. Using l-valine p-nitroanilide (Val-pNA), introduced as a model of the N-terminal valine, the rate of formation of the EVK adduct was studied, and the rate constant determined to 200 M(-1)h(-1) at 37 °C. In blood, the reaction rate was too fast to be feasibly measured, EVK showing a half-life adduct was found to be unstable, with a half-life of 7.6 h. From the mean adduct level measured in human blood, a daily dose (area under the concentration-time-curve, AUC) of 7 nMh EVK was estimated. The AUC of AA from intake via food is about 20 times higher. EVK is naturally present in a wide range of foods and is also used as a food additive. Most probably, naturally formed EVK is a major source to observed adducts. Evaluation of available toxicological data and information on occurrence of EVK indicate that further studies of EVK are motivated. This study illustrates a quantitative strategy in the initial evaluation of the significance of an adduct detected through adduct screening.

  1. SYNTHESIS AND CHARACTERIZATION OF A NOVEL STYRYLTHIOPHENE MONOMER AND CORRESPONDING POLYURETHANE FOR NLO MATERIALS

    Institute of Scientific and Technical Information of China (English)

    Jiang-hong Wang; Jian-feng Zhai; Jia-yun Zhou; Yu-xia Zhao; Yu-quan Shen

    1999-01-01

    A novel monomer,(trans)-7-[4-N,N-(di-β-hydroxyethyl) amino-benzene]-ethenyl-3,5-dinitro-thiophene (HBDT), was synthesized and characterized. The details of synthesizing the monomer and prepolymer, polyurethane with the monomer covalently incorporated are presented. The prepolymer and polyurethane exhibited good solubility in common organic solvents. Molecular nonlinear optical properties of the monomer (HBDT) substituted thiophene based stilbenes is presented.

  2. Including the Copenhagen Adduction Exercise in the FIFA 11+ Provides Missing Eccentric Hip Adduction Strength Effect in Male Soccer Players: A Randomized Controlled Trial.

    Science.gov (United States)

    Harøy, Joar; Thorborg, Kristian; Serner, Andreas; Bjørkheim, André; Rolstad, Linn E; Hölmich, Per; Bahr, Roald; Andersen, Thor Einar

    2017-08-01

    The FIFA 11+ was developed as a complete warm-up program to prevent injuries in soccer players. Although reduced hip adduction strength is associated with groin injuries, none of the exercises included in the FIFA 11+ seem to specifically target hip adduction strength. To investigate the effect on eccentric hip adduction strength of the FIFA 11+ warm-up program with or without the Copenhagen adduction exercise. Randomized controlled trial; Level of evidence, 1. We recruited 45 eligible players from 2 U19 elite male soccer teams. Players were randomized into 2 groups; 1 group carried out the standard FIFA 11+ program, while the other carried out the FIFA 11+ but replaced the Nordic hamstring exercise with the Copenhagen adduction exercise. Both groups performed the intervention 3 times weekly for 8 weeks. Players completed eccentric strength and sprint testing before and after the intervention. Per-protocol analyses were performed, and 12 players were excluded due to low compliance (<67% of sessions completed). The main outcome was eccentric hip adduction strength (N·m/kg). Between-group analyses revealed a significantly greater increase in eccentric hip adduction strength of 0.29 Nm/kg (8.9%; P = .01) in favor of the group performing the Copenhagen adduction exercise, whereas no within-group change was noted in the group that used the standard FIFA 11+ program (-0.02 N·m/kg [-0.7%]; P = .69). Including the Copenhagen adduction exercise in the FIFA 11+ program increases eccentric hip adduction strength, while the standard FIFA 11+ program does not. Registration: Registration: ISRCTN13731446 (International Standard Randomised Controlled Trial Number registry).

  3. Studies Update Vinyl Chloride Hazards.

    Science.gov (United States)

    Rawls, Rebecca

    1980-01-01

    Extensive study affirms that vinyl chloride is a potent animal carcinogen. Epidemiological studies show elevated rates of human cancers in association with extended contact with the compound. (Author/RE)

  4. Reactivity Ratios of Diethyldiallylammonium Chloride with Acrylamide or Acrylic Acid

    Institute of Scientific and Technical Information of China (English)

    Li Hua LIU; Zhi Qiang LIU; Zhu Qing GONG

    2006-01-01

    The compositions of copolymers of diethyldiallylammonium chloride (DEDAAC) with acrylamide (AM), acrylic acid (AA) or sodium acrylic acid (NaAA) at low conversion were determined by elemental analysis, and the reactivity ratios of monomers in copolymerization were obtained by Kelen-Tudos method. The results showed that the reactivity ratios rDE and rAM are 0.31 and 5.27 for DEDAAC with AM, rDE and rAA are 0.28 and 5.15 for DEDAAC with AA, and rDE and rNaAA are 0.40 and 3.97 for DEDAAC with NaAA, respectively. The copolymerizations for DEDAAC with AM, AA or NaAA are non-ideal copolymerization and the products are random copolymers.

  5. Parameters Affecting Hydrogen Chloride Measurements

    Science.gov (United States)

    1993-06-01

    contain sea salt, which is hygroscopic because of the magnesium chloride present, or ammonium bisulfate , which mostly comes from sulfur pollution and is...boosters release hydrogen chloride as a combustion product, and hydrazines or nitric acid can be spilled from liquid fuel motors. Monitoring the...solubility constant, and the second is the acid ionization constant. From experimental work, the product of the two constants is well established (Reference

  6. Chloride channels in stroke

    Institute of Scientific and Technical Information of China (English)

    Ya-ping ZHANG; Hao ZHANG; Dayue Darrel DUAN

    2013-01-01

    Vascular remodeling of cerebral arterioles,including proliferation,migration,and apoptosis of vascular smooth muscle cells (VSMCs),is the major cause of changes in the cross-sectional area and diameter of the arteries and sudden interruption of blood flow or hemorrhage in the brain,ie,stroke.Accumulating evidence strongly supports an important role for chloride (Clˉ) channels in vascular remodeling and stroke.At least three Clˉ channel genes are expressed in VSMCs:1) the TMEM16A (or Ano1),which may encode the calcium-activated Clˉ channels (CACCs); 2) the CLC-3 Clˉ channel and Clˉ/H+ antiporter,which is closely related to the volume-regulated Clˉ channels (VRCCs); and 3) the cystic fibrosis transmembrane conductance regulator (CFTR),which encodes the PKA-and PKC-activated Clˉ channels.Activation of the CACCs by agonist-induced increase in intracellular Ca2+ causes membrane depolarization,vasoconstriction,and inhibition of VSMC proliferation.Activation of VRCCs by cell volume increase or membrane stretch promotes the production of reactive oxygen species,induces proliferation and inhibits apoptosis of VSMCs.Activation of CFTR inhibits oxidative stress and may prevent the development of hypertension.In addition,Clˉ current mediated by gammaaminobutyric acid (GABA) receptor has also been implicated a role in ischemic neuron death.This review focuses on the functional roles of Clˉ channels in the development of stroke and provides a perspective on the future directions for research and the potential to develop Clˉ channels as new targets for the prevention and treatment of stroke.

  7. Charge transfer adducts of metal complexes of π-donor ligands with I 2 and TCNQ

    Science.gov (United States)

    Bera, T. R.; Sen, D.; Ghosh, R.

    1989-01-01

    Copper(II) and nickel(II) biguanides and O-alkyl-1-amidinourea can act as donors for the formation of charge transfer (CT) adducts with I 2 and tetracyanoquinodimethane (TNCQ) as acceptors. Iodine adducts are characterized both in solid and solution states whereas TCNQ adducts obtain only in solution. Appearance of a broad band at 355 nm for iodine adducts and at 335 nm for TNCQ adducts and shifting of i.r. frequencies support the formation of donor acceptor associates. Elemental analysis establishes 1:1 stoichiometry of the solid adducts. The K and ɛ values determined by modified Benesi—Hildebrand, Scott and Rose—Drago equations are found to be of the order of 10 4 and 10 3 respectively at 298 K in methanol. The solvent effect on the K values is discussed in terms of coupled solute-solute and solute-solvent equilibria.

  8. Zinc acetylacetonate hydrate adducted with nitrogen donor ligands: Synthesis, spectroscopic characterization, and thermal analysis

    Science.gov (United States)

    Brahma, Sanjaya; Shivashankar, S. A.

    2015-12-01

    We report synthesis, spectroscopic characterization, and thermal analysis of zinc acetylacetonate complex adducted by nitrogen donor ligands, such as pyridine, bipyridine, and phenanthroline. The pyridine adducted complex crystallizes to monoclinic crystal structure, whereas other two adducted complexes have orthorhombic structure. Addition of nitrogen donor ligands enhances the thermal property of these complexes as that with parent metal-organic complex. Zinc acetylacetonate adducted with pyridine shows much higher volatility (106 °C), decomposition temperature (202 °C) as that with zinc acetylacetonate (136 °C, 220 °C), and other adducted complexes. All the adducted complexes are thermally stable, highly volatile and are considered to be suitable precursors for metal organic chemical vapor deposition. The formation of these complexes is confirmed by powder X-ray diffraction, Fourier transform infrared spectroscopy, mass spectroscopy, and elemental analysis. The complexes are widely used as starting precursor materials for the synthesis of ZnO nanostructures by microwave irradiation assisted coating process.

  9. 21 CFR 184.1138 - Ammonium chloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium chloride. 184.1138 Section 184.1138 Food... Specific Substances Affirmed as GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS Reg. No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution....

  10. Hydrolytic Cleavage Products of Globin Adducts in Urine as Possible Biomarkers of Cumulative Dose: Proof of Concept Using Styrene Oxide as a Model Adduct-Forming Compound.

    Science.gov (United States)

    Mráz, Jaroslav; Hanzlíková, Iveta; Moulisová, Alena; Dušková, Šárka; Hejl, Kamil; Bednářová, Aneta; Dabrowská, Ludmila; Linhart, Igor

    2016-04-18

    A new experimental model was designed to study the fate of globin adducts with styrene 7,8-oxide (SO), a metabolic intermediate of styrene and a model electrophilic compound. Rat erythrocytes were incubated with SO at 7 or 22 °C. Levels of specific amino acid adducts in globin were determined by LC/MS analysis of the globin hydrolysate, and erythrocytes with known adduct content were administered intravenously to recipient rats. The course of adduct elimination from the rat blood was measured over the following 50 days. In the erythrocytes incubated at 22 °C, a rapid decline in the adduct levels on the first day post-transfusion followed by a slow phase of elimination was observed. In contrast, the adduct elimination in erythrocytes incubated at 7 °C was nearly linear, copying elimination of intact erythrocytes. In the urine of recipient rats, regioisomeric SO adducts at cysteine, valine, lysine, and histidine in the form of amino acid adducts and/or their acetylated metabolites as well as SO-dipeptide adducts were identified by LC/MS supported by synthesized reference standards. S-(2-Hydroxy-1-phenylethyl)cysteine and S-(2-hydroxy-2-phenylethyl)cysteine, the most abundant globin adducts, were excreted predominantly in the form of the corresponding urinary mercapturic acids (HPEMAs). Massive elimination of HPEMAs via urine occurred within the first day from the erythrocytes incubated at both 7 and 22 °C. However, erythrocytes incubated at 7 °C also showed a slow second phase of elimination such that HPEMAs were detected in urine up to 50 days post-transfusion. These results indicate for the first time that globin adducts can be cleaved in vivo to modified amino acids and dipeptides. The cleavage products and/or their predictable metabolites are excreted in urine over the whole life span of erythrocytes. Some of the urinary adducts may represent a new type of noninvasive biomarker for exposure to adduct-forming chemicals.

  11. Detection and quantification of 4-ABP adducts in DNA from bladder cancer patients.

    Science.gov (United States)

    Zayas, Beatriz; Stillwell, Sara W; Wishnok, John S; Trudel, Laura J; Skipper, Paul; Yu, Mimi C; Tannenbaum, Steven R; Wogan, Gerald N

    2007-02-01

    We analyzed bladder DNA from 27 cancer patients for dG-C8-4-aminobiphenyl (dG-C8-ABP) adducts using the liquid chromatography tandem mass spectrometry method with a 700 attomol (1 adduct in 10(9) bases) detection limit. Hemoglobin (Hb) 4-aminobiphenyl (4-ABP) adduct levels were measured by gas chromatography-mass spectrometry. After isolation of dG-C8-ABP by immunoaffinity chromatography and further purification, deuterated (d9) dG-C8-ABP (MW=443 Da) was added to each sample. Structural evidence and adduct quantification were determined by selected reaction monitoring, based on the expected adduct ion [M+H+]+1, at m/z 435 with fragmentation to the product ion at m/z 319, and monitoring of the transition for the internal standard, m/z 444-->328. The method was validated by analysis of DNA (100 microg each) from calf thymus; livers from ABP-treated and untreated rats; human placentas; and TK6 lymphoblastoid cells. Adduct was detected at femtomol levels in DNA from livers of ABP-treated rats and calf thymus, but not in other controls. The method was applied to 41 DNA samples (200 microg each) from 27 human bladders; 28 from tumor and 14 from surrounding non-tumor tissue. Of 27 tissues analyzed, 44% (12) contained 5-80 dG-C8-ABP adducts per 10(9) bases; only 1 out of 27 (4%) contained adduct in both tumor and surrounding tissues. The Hb adduct was detected in samples from all patients, at levels of 12-1960 pg per gram Hb. There was no correlation between levels of DNA and Hb adducts. The presence of DNA adducts in 44% of the subjects and high levels of Hb adducts in these non-smokers indicate environmental sources of exposure to 4-ABP.

  12. Tissue distribution of DNA adducts and their persistence in blood of mice exposed to benzene.

    OpenAIRE

    Li, G.; Wang, C.; Xin, W. (Weidong); Yin, S

    1996-01-01

    Chemicals combine with DNA, resulting in DNA damage, which could initiate carcinogenesis. To study whether benzene or benzene metabolites bind to DNA, DNA adducts in various tissues and their persistence in leukocytes were examined using the 32P-postlabeling assay. LACA mice were dosed ip with benzene at 500 mg/kg bw twice for 5 days. Two additional spots of DNA adducts are formed in bone marrow cells, liver cells, and peripheral blood compared with control mice. The relative adduct labeling ...

  13. [Migration of monomers and primary aromatic amines from nylon products].

    Science.gov (United States)

    Mutsuga, Motoh; Yamaguchi, Miku; Ohno, Hiroyuki; Kawamura, Yoko

    2010-01-01

    Migration of 2 kinds of monomer and 21 kinds of primary aromatic amines (PAAs) from 21 kinds of nylon products such as turners, ladles and wrap film were determined. Samples were classified as regards materials by mean of pyrolysis-GC/MS. One sample was classified as nylon 6, 15 samples as nylon 66 and three samples as nylon 6/66 copolymers, while two samples were laminate of nylon 6 with polyethylene or polypropylene. All of the nylon 66 samples contained a small amount of ε-caprolactam (CPL), which is the nylon 6 monomer. Migration levels of monomers and PAAs at 60°C for 30 min into 20% ethanol were measured by LC/MS/MS. CPL was detected at the level of 0.015-38 µg/mL from all samples, excluding one wrap film sample, and 1,6-hexamethylenediamine was detected at the level of 0.002-0.013 µg/mL from all nylon 66 samples and one nylon 6/66 sample. In addition, 0.006-4.3 µg/mL of 4,4'-diaminodiphenylmethane from three samples, 0.032-0.23 µg/mL of aniline from four samples, 0.001 µg/mL of 4-chloroaniline from two samples, and 0.002 µg/mL of 2-toluidine and 0.066 mg/mL of 1-naphthylamine from one sample each were detected. The migration levels at 95 or 121°C were about 3 and 10 times the 60°C levels, respectively.

  14. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Science.gov (United States)

    2010-07-01

    ... dichloride, vinyl chloride and polyvinyl chloride plants. 61.65 Section 61.65 Protection of Environment... AIR POLLUTANTS National Emission Standard for Vinyl Chloride § 61.65 Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants. An owner or operator of an ethylene...

  15. Recovery of Monomer from Nylon waste powder for its Recycling

    Directory of Open Access Journals (Sweden)

    Dilip B.Patil

    2014-03-01

    Full Text Available Recovery of monomer hexamethylene diamine(HMD in the form of dibenzoyl derivative of hexamethylene diamine (DBHMD from Nylon waste rope powder was carried out by degradation of Nylon waste powder of nylon rope waste.The molecular weight of nylon waste powder was found to be 26582.The minimum amount of nylon waste powder and hydrochloric acid required for maximum recovery of HMD and DBHMD was found to be 5g and 5N,50ml hydrochloric acid respectively. Further it was observed that the maximum time and temperature required for getting maximum yield of DBHMD was 120 minutes and 800C respectively.

  16. Synthesis and Characterization of the Adducts of Bis(O-ethyldithiocarbonatocopper(II with Substituted Pyridines

    Directory of Open Access Journals (Sweden)

    Gurpreet Kour

    2013-01-01

    Full Text Available Monomeric five coordinated adducts of bis(O-ethyldithiocarbonatocopper(II of general formula [Cu(C2H5OCS22(L], [L = 2-, 3-, 4-methylpyridines and 2-, 3-, 4-ethylpyridines] have been synthesized and characterized by elemental analysis, i.r. and electronic spectroscopy, magnetic and conductivity measurements. Analytical results show that the adducts have 1 : 1 stoichiometry. The adducts were found to be paramagnetic and their magnetic moments at room temperature lie within the 1.81–1.94 B.M. range and this indicates the presence of one unpaired electron. All the adducts have distorted square pyramidal geometry.

  17. Chlorambucil-adducts in DNA analyzed at the oligonucleotide level using HPLC-ESI MS.

    Science.gov (United States)

    Mohamed, Dalia; Mowaka, Shereen; Thomale, Jürgen; Linscheid, Michael W

    2009-08-01

    Chlorambucil (N,N-bis(2-chloroethyl)-p-aminophenylbutyric acid) is a bifunctional alkylating drug belonging to the nitrogen mustard group and is widely used as an anticancer agent. As the antitumor activity of the nitrogen mustards is based on the formation of adducts with genomic DNA, calf thymus DNA-Chlorambucil adducts were the major target in this study. Calf thymus DNA was incubated with Chlorambucil to induce the formation of a wide variety of adducts. Subsequently, enzymatic digestion of the DNA was performed using Benzonase and Nuclease S1 aiming at the production of oligonucleotides. Separation and structure elucidation of the individual DNA-Chlorambucil adducts was achieved using HPLC interfaced to electrospray ionization ion trap mass spectrometry. Both trinucleotide and tetranucleotide Chlorambucil adducts were detected. The majority of the detected trinucleotide adducts involved monofunctional alkylation with guanine being the hotspot for alkylation. Only a few bifunctional trinucleotide adducts both intra- and interstrand cross-links were found. On the contrary, cross-linked adducts were the major detected tetranucleotides in which the intrastrand cross-links predominated over the interstrand cross-links. To a lesser extent, monofunctional guanine alkylated tetranucleotides were detected as well. With MS(n) experiments, the detailed structures of Chlorambucil adducts of the tri- and tetranucleotides were determined.

  18. Temporal and spatial features of the formation of DNA adducts in sulfur mustard-exposed skin

    Energy Technology Data Exchange (ETDEWEB)

    Batal, Mohamed [Laboratoire «Lésions des Acides Nucléiques», Université Joseph Fourier – Grenoble 1, CEA/Institut Nanoscience et Cryogénie/SCIB, UMR-E3, Grenoble (France); Département de Toxicologie et Risques Chimiques, Unité de Brûlure Chimique, Institut de Recherche Biomédicale des Armées, Antenne de La Tronche (France); Boudry, Isabelle; Mouret, Stéphane; Wartelle, Julien; Emorine, Sandy; Bertoni, Marine [Département de Toxicologie et Risques Chimiques, Unité de Brûlure Chimique, Institut de Recherche Biomédicale des Armées, Antenne de La Tronche (France); Bérard, Izabel [Laboratoire «Lésions des Acides Nucléiques», Université Joseph Fourier – Grenoble 1, CEA/Institut Nanoscience et Cryogénie/SCIB, UMR-E3, Grenoble (France); Cléry-Barraud, Cécile [Département de Toxicologie et Risques Chimiques, Unité de Brûlure Chimique, Institut de Recherche Biomédicale des Armées, Antenne de La Tronche (France); and others

    2013-12-15

    Sulfur mustard (SM) is a chemical warfare agent that targets skin where it induces large blisters. DNA alkylation is a critical step to explain SM-induced cutaneous symptoms. We determined the kinetics of formation of main SM–DNA adducts and compare it with the development of the SM-induced pathogenesis in skin. SKH-1 mice were exposed to 2, 6 and 60 mg/kg of SM and treated skin was biopsied between 6 h and 21 days. Formation of SM DNA adducts was dose-dependent with a maximum immediately after exposure. However, adducts were persistent and still detectable 21 days post-exposure. The time-dependent formation of DNA adducts was also found to be correlated with the appearance of apoptotic cells. This temporal correlation suggests that these two early events are responsible for the severity of the damage to the skin. Besides, SM–DNA adducts were also detected in areas located next to contaminated zone, thus suggesting that SM diffuses in skin. Altogether, this work provides for the first time a clear picture of SM-induced genotoxicity using DNA adducts as a marker. - Highlights: • Sulfur mustard adducts are formed in DNA after skin exposure. • DNA damage formation is an early event in the pathological process of skin burn. • The amount of SM–DNA adducts is maximal at the earliest time point investigated. • Adducts are still detected 3 weeks after exposure. • Sulfur mustard diffuses in skin especially when large doses are applied.

  19. N7-guanine adducts of the epoxy metabolites of 1,3-butadiene in mice lung.

    Science.gov (United States)

    Koivisto, P; Peltonen, K

    2001-06-01

    Epoxy metabolites of 1,3-butadiene are electrophilic and can bind to nucleophilic sites in DNA forming DNA adducts. In this study, guanine N7 adducts of epoxy butene and guanine N7 adducts of epoxy butanediol were measured in lung tissues of mice inhalation exposed to various concentrations of 1,3-butadiene. 32P-postlabeling of DNA adducts were used to demonstrate that the DNA adducts derived from epoxybutene and epoxybutanediol were formed in a dose dependent manner. More than 98% of all adducts detected were formed from epoxybutanediol. Enantiomeric distribution of the adducts formed in vivo differs from that of in vitro experiments demonstrated before. In the case of epoxybutene most of the adducts were formed to the terminal carbon of the S-epoxybutene enantiomer. Most of the adducts derived from epoxybutanediol were formed from the 2S-3R enantiomer. The data demonstrates that enzymatic processes involved with activation and/or detoxification of the metabolites are enantiospecific and/or DNA repair machinery repairs the damage with stereochemical considerations. These are the crucial factors if interspecies differences in tumor sensitiveness is concerned.

  20. Lifetimes and stabilities of familiar explosives molecular adduct complexes during ion mobility measurements

    Science.gov (United States)

    McKenzie, Alan; DeBord, John Daniel; Ridgeway, Mark; Park, Melvin; Eiceman, Gary; Fernandez-Lima, Francisco

    2015-01-01

    Trapped ion mobility spectrometry coupled to mass spectrometry (TIMS-MS) was utilized for the separation and identification of familiar explosives in complex mixtures. For the first time, molecular adduct complex lifetimes, relative stability, binding energies and candidate structures are reported for familiar explosives. Experimental and theoretical results showed that the adduct size and reactivity, complex binding energy and the explosive structure tailors the stability of the molecular adduct complex. TIMS flexibility to adapt the mobility separation as a function of the molecular adduct complex stability (i.e., short or long IMS experiments / low or high IMS resolution) permits targeted measurements of explosives in complex mixtures with higher confidence levels. PMID:26153567

  1. Correlation between Quadriceps Endurance and Adduction Moment in Medial Knee Osteoarthritis.

    Directory of Open Access Journals (Sweden)

    Soon-Hyuck Lee

    Full Text Available It is not clear whether the strength or endurance of thigh muscles (quadriceps and hamstring is positively or negatively correlated with the adduction moment of osteoarthritic knees. This study therefore assessed the relationships between the strength and endurance of the quadriceps and hamstring muscles and adduction moment in osteoarthritic knees and evaluated predictors of the adduction moment. The study cohort comprised 35 patients with unilateral medial osteoarthritis and varus deformity who were candidates for open wedge osteotomy. The maximal torque (60°/sec and total work (180°/sec of the quadriceps and hamstring muscles and knee adduction moment were evaluated using an isokinetic testing device and gait analysis system. The total work of the quadriceps (r = 0.429, P = 0.037 and hamstring (r = 0.426, P = 0.045 muscles at 180°/sec each correlated with knee adduction moment. Preoperative varus deformity was positively correlated with adduction moment (r = 0.421, P = 0.041. Multiple linear regression analysis showed that quadriceps endurance at 180°/sec was the only factor independently associated with adduction moment (β = 0.790, P = 0.032. The adduction moment of osteoarthritic knees correlated with the endurance, but not the strength, of the quadriceps muscle. However, knee adduction moment did not correlate with the strength or endurance of the hamstring muscle.

  2. Comparison of monofunctional and multifunctional monomers in phosphate binding molecularly imprinted polymers.

    Science.gov (United States)

    Wu, Xiangyang; Goswami, Kisholoy; Shimizu, Ken D

    2008-01-01

    In this study, molecularly imprinted polymers (MIPs) prepared using a multifunctional and a monofunctional monomer were compared with respect to their affinities, selectivities, and imprinting efficiencies for organophosphates. This is of interest because multifunctional monomers have higher affinities than traditional monofunctional monomers for their target analytes and thus should yield MIPs with higher affinities and selectivities. However, polymers containing multifunctional monomer may also have a higher number of unselective, non-templated binding sites. This increase in background binding sites could lead to a decrease in the magnitude of the imprinting effect and in the selectivity of the MIP. Therefore, phosphate selective imprinted and non-imprinted polymers (NIPs) were prepared using a novel multifunctional triurea monomer. The binding properties of these polymers were compared with polymers prepared using a monofunctional monourea monomer. The binding affinities and selectivities of the monomers, imprinted polymers, and NIPs were characterized by NMR titration, binding uptake studies, and binding isotherms. MIPs prepared with the triurea monomer showed higher binding affinity and selectivity for the diphenylphosphate anion in organic solvents than the MIPs prepared with the monofunctional monomer. Surprisingly, the binding properties of the NIPs revealed that the polymers prepared using the multifunctional and monofunctional monomers were very similar in affinity and selectivity. Thus, the multifunctional monomers increase not only the affinity of the MIP but also enhance the imprinting effect.

  3. CHLORIDE WASHER PERFORMACE TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, J; David Best, D; Robert Pierce, R

    2007-11-30

    Testing was performed to determine the chloride (Cl-) removal capabilities of the Savannah River National Laboratory (SRNL) designed and built Cl- washing equipment intended for HB-Line installation. The equipment to be deployed was tested using a cerium oxide (CeO2) based simulant in place of the 3013 plutonium oxide (PuO2) material. Two different simulant mixtures were included in this testing -- one having higher Cl- content than the other. The higher Cl- simulant was based on K-Area Interim Surveillance Inspection Program (KIS) material with Cl- content approximately equal to 70,000 ppm. The lower Cl- level simulant was comparable to KIS material containing approximately 8,000-ppm Cl- content. The performance testing results indicate that the washer is capable of reducing the Cl- content of both surrogates to below 200 ppm with three 1/2-liter washes of 0.1M sodium hydroxide (NaOH) solution. Larger wash volumes were used with similar results - all of the prescribed test parameters consistently reduced the Cl- content of the surrogate to a value below 200 ppm Cl- in the final washed surrogate material. The washer uses a 20-micron filter to retain the surrogate solids. Tests showed that 0.16-0.41% of the insoluble fraction of the starting mass passed through the 20-micron filter. The solids retention performance indicates that the fissile masses passing through the 20-micron filter should not exceed the waste acceptance criteria for discard in grout to TRU waste. It is recommended that additional testing be pursued for further verification and optimization purposes. It is likely that wash volumes smaller than those tested could still reduce the Cl- values to acceptable levels. Along with reduced wash volumes, reuse of the third wash volume (in the next run processed) should be tested as a wash solution minimization plan. A 67% reduction in the number of grouted paint pails could be realized if wash solution minimization testing returned acceptable results.

  4. In vitro screening of 50 highly prescribed drugs for thiol adduct formation--comparison of potential for drug-induced toxicity and extent of adduct formation.

    Science.gov (United States)

    Gan, Jinping; Ruan, Qian; He, Bing; Zhu, Mingshe; Shyu, Wen C; Humphreys, W Griffith

    2009-04-01

    Reactive metabolite formation has been associated with drug-induced liver, skin, and hematopoietic toxicity of many drugs that has resulted in serious clinical toxicity, leading to clinical development failure, black box warnings, or, in some cases, withdrawal from the market. In vitro and in vivo screening for reactive metabolite formation has been proposed and widely adopted in the pharmaceutical industry with the aim of minimizing the property and thus the risk of drug-induced toxicity (DIT). One of the most common screening methods is in vitro thiol trapping of reactive metabolites. Although it is well-documented that many hepatotoxins form thiol adducts, there is no literature describing the adduct formation potential of safer drugs that are widely used. The objective of this study was to quantitatively assess the thiol adduct formation potential of 50 drugs (10 associated with DIT and 40 not associated) and document apparent differences in adduct formation between toxic and safer drugs. Dansyl glutathione was used as a trapping agent to aid the quantitation of adducts following in vitro incubation of drugs with human liver microsomes in the presence and absence of NADPH. Metabolic turnover of these drugs was also monitored by LC/UV. Overall, 15 out of the 50 drugs screened formed detectable levels of thiol adducts. There were general trends toward more positive findings in the DIT group vs the non-DIT group. These trends became more marked when the relative amount of thiol adducts was taken into account and improved further when dose and total daily reactive metabolite burdens were considered. In conclusion, there appears to be a general trend between the extent of thiol adduct formation and the potential for DIT, which would support the preclinical measurement and minimization of the property through screening of thiol adduct formation as part of an overall discovery optimization paradigm.

  5. Environmental air pollution and DNA adducts in Copenhagen bus drivers - effect of GSTM1 and NAT2 genotypes on adduct level

    DEFF Research Database (Denmark)

    Nielsen, Per Sabro; de Pater, Nettie; Okkels, Henrik

    1996-01-01

    The lymphocyte bulky PAH-DNA adduct levels have been studied in persons occupationally exposed to ambient air pollution. The exposure group consisted of 90 healthy, nonsmoking bus drivers from the Copenhagen area, divided into three exposure groups according to driving area, and 60 rural controls...... to levels of exposure to urban air pollution and indicated that these adducts might be helpful as a means of classifying better different exposure groups for epidemiological studies. Furthermore, it demonstrated the ability of 32P-postlabelling to discern small differences in low exposure to ambient air...... pollution and suggested a possible effect of GSTM1*0/0 on DNA adduct levels....

  6. Effects of acrylic resin monomers on porcine coronary artery reactivity.

    Science.gov (United States)

    Abebe, Worku; West, Daniel; Rueggeberg, Frederick A; Pashley, David; Mozaffari, Mahmood S

    2016-07-01

    The purpose of the present investigation was to assess the reactivity of porcine coronary arteries under in vitro conditions following their exposure to methyl methacrylate (MMA) and hydroxyethyl methacrylate (HEMA) monomers. Confirming previous studies using rat aortas, both MMA and HEMA induced acute/direct relaxation of coronary ring preparations, which was partly dependent on the endothelium. With prolonged tissue exposure, both monomers caused time- and concentration-dependent inhibition of receptor-mediated contraction of the vascular smooth muscle caused by prostaglandin F2∝ (PGF2∝), with HEMA causing more inhibition than MMA. Hydroxyethyl methacrylate, but not MMA, also produced impairment of non-receptor-mediated contraction of the coronary smooth muscle induced by KCl. On the other hand, neither HEMA nor MMA altered relaxation of the smooth muscle produced by the direct-acting pharmacological agent, sodium nitroprusside (SNP). While exposure to HEMA impaired endothelium-dependent vasorelaxation caused by bradykinin (BK), MMA markedly enhanced this endothelial-mediated response of the arteries. The enhanced endothelial response produced by MMA was linked to nitric oxide (NO) release. In conclusion, with prolonged tissue exposure, MMA causes less pronounced effects/adverse consequences on coronary smooth muscle function relative to the effect of HEMA, while enhancing vasorelaxation associated with release of NO from the endothelium. Accordingly, MMA-containing resin materials appear to be safer for human applications than materials containing HEMA.

  7. Wet air oxidation of epoxy acrylate monomer industrial wastewater.

    Science.gov (United States)

    Yang, Shaoxia; Liu, Zhengqian; Huang, Xiaohui; Zhang, Beiping

    2010-06-15

    Epoxy acrylate monomer industrial wastewater contained highly concentrated and toxic organic compounds. The wet air oxidation (WAO) and catalytic wet air oxidation (CWAO) were used to eliminate pollutants in order to examine the feasibility of the WAO/CWAO as a pre-treatment method for the industrial wastewater. The results showed that in the WAO 63% chemical oxygen demand (COD) and 41% total organic carbon (TOC) removals were achieved and biological oxygen demand (BOD(5))/COD ratio increased from 0.13 to 0.72 after 3h reaction at 250 degrees C, 3.5MPa and the initial concentration of 100g(COD)/L. Among homogenous catalysts (Cu(2+), Fe(2+), Fe(3+) and Mn(2+) salts), Cu(2+) salt exhibited better performance. CuO catalyst was used in the CWAO of the wastewater, COD and TOC conversion were 77 and 54%, and good biodegradability was achieved. The results proved that the CWAO was an effective pre-treatment method for the epoxy acrylate monomer industrial wastewater.

  8. Shelf Life of PMR Polyimide Monomer Solutions and Prepregs Extended

    Science.gov (United States)

    Alston, William B.; Scheiman, Daniel A.

    2000-01-01

    PMR (Polymerization of Monomeric Reactants) technology was developed in the mid-1970's at the NASA Glenn Research Center at Lewis Field for fabricating high-temperature stable polyimide composites. This technology allowed a solution of polyimide monomers or prepreg (a fiber, such as glass or graphite, impregnated with PMR polyimide monomers) to be thermally cured without the release of volatiles that cause the formation of voids unlike the non-PMR technology used for polyimide condensation type resins. The initial PMR resin introduced as PMR 15 is still commercially available and is used worldwide by aerospace industries as the state-of-the-art resin for high-temperature polyimide composite applications. PMR 15 offers easy composite processing, excellent composite mechanical property retention, a long lifetime at use temperatures of 500 to 550 F, and relatively low cost. Later, second-generation PMR resin versions, such as PMR II 50 and VCAP 75, offer improvements in the upper-use temperature (to 700 F) and in the useful life at temperature without major compromises in processing and property retention but with significant increases in resin cost. Newer versions of nontoxic (non-methylene dianiline) PMR resins, such as BAX PMR 15, offer similar advantages as originally found for PMR 15 but also with significant increases in resin cost. Thus, the current scope of the entire PMR technology available meets a wide range of aeronautical requirements for polymer composite applications.

  9. Effect of cationic monomer on properties of fluorinated acrylate latex

    Institute of Scientific and Technical Information of China (English)

    Li Jun Chen

    2012-01-01

    Cationic fluorinated acrylate latex was prepared via semi-continuous emulsion copolymerization of cationic monomer and other monomers.The resultant latex and its film were characterized with dynamic light scattering detector and contact angle meter.Influences of amount of DMDAAC on the properties of resultant latex and its film were investigated in detail.Results show that the particle size of the latex has the minimum value and the zeta potential of the latex is increased when the amount of DMDAAC is increased.In addition,the particle size of the latex is unimodal distribution when the amount of DMDAAC is not more than 2.5%.However,the particle size of the latex is bimodal distribution when the amount of DMDAAC is more than 2.5%.The contact angle is varied slightly with the increase of amount of DMDAAC when it is not more than 2.5%.Nevertheless,the contact angle is decreased with the increase of the amount of DMDAAC when it is more than 25%.

  10. Induced DNA damage by dental resin monomers in somatic cells.

    Science.gov (United States)

    Arossi, Guilherme Anziliero; Lehmann, Mauricio; Dihl, Rafael Rodrigues; Reguly, Maria Luiza; de Andrade, Heloisa Helena Rodrigues

    2010-02-01

    The present in vivo study investigated the genotoxicity of four dental resin monomers: triethyleneglycoldimethacrylate (TEGDMA), hydroxyethylmethacrylate (HEMA), urethanedimethacrylate (UDMA) and bisphenol A-glycidylmethacrylate (BisGMA). The Somatic Mutation and Recombination Test (SMART) in Drosophila melanogaster was applied to analyse their genotoxicity expressed as homologous mitotic recombination, point and chromosomal mutation. SMART detects the loss of heterozygosity of marker genes expressed phenotypically on the fly's wings. This fruit fly has an extensive genetic homology to mammalians, which makes it a suitable model organism for genotoxic investigations. The present findings provide evidence that the mechanistic basis underlying the genotoxicity of UDMA and TEGDMA is related to homologous recombination and gene/chromosomal mutation. A genotoxic pattern can correspondingly be discerned for both UDMA and TEGDMA: their genotoxicity is attributed respectively to 49% and 44% of mitotic recombination, as well as 51% and 56% of mutational events, including point and chromosomal alterations. The monomer UDMA is 1.6 times more active than TEGDMA to induce mutant clones per treatment unit. BisGMA and HEMA had no statistically significant effect on total spot frequencies - suggesting no genotoxic action in the SMART assay. The clinical significance of these observations has to be interpreted for data obtained in other bioassays.

  11. The Kinetics of Cellulose Grafting with Vinyl Acetate Monomer

    Directory of Open Access Journals (Sweden)

    Éva Borbély

    2005-11-01

    Full Text Available Cellulose is a natural raw material recurring in a great quantity. The demand touse it more and more widely is increasing. The production of cellulose derivates started asearly as the 19th century, however the modification of these materials meant the breakingup the fibrous structure, which made their use more difficult in paper industry. Themodified cellulose made by graft copolymerization, however, keeps its fibrous character,which provides a great advantage regarding its use. Grafting of industrial cellulose pulpwith vinyl-acetate allows for the production of grafted wood cellulose fibres that have athermoplastic layer on their surface. The binder fibre (fibrid produced in this way can beexcellently used for producing synthetic papers.In the first part of my experiments I dealt with choosing the parameters of graftcopolymerization which are best suited to various uses and after that I studied thedependence of graft reaction on the composition and properties of industrial celluloseapplied. The selection of the suitable reaction parameters was followed by the study ofreaction speed and activation energy. I have stated that the gross reaction of graftingindustrial cellulose with vinyl-acetate monomer is a second order reaction, which is provenby the fact that the invert of the momentary monomer concentration of the system plottedagainst time is a linear function. The rise of the curves, that is, the reaction speed increaseswhen the temperature in the range of 293–323 K is increasing, while the average activationenergy decreases.

  12. Stability, accumulation and cytotoxicity of an albumin-cisplatin adduct

    DEFF Research Database (Denmark)

    Møller, Charlotte; Tastesen, Hanne Sørup; Gammelgaard, Bente

    2010-01-01

    The accumulation and cytotoxicity of a 10 µmol L¿¹ equimolar human serum albumin-cisplatin adduct (HSA-Pt) was investigated in suspension Ehrlich Ascites Tumor Cells (EATC) and adherent Ehrlich Lettré Ascites Cells (Lettré). HSA-Pt did not induce apoptosis nor was it taken up by the cells to any...... significant amount within 24 h incubation. The accumulation and cytotoxicity of HSA-Pt was compared to 10 µmol L¿¹ cisplatin for which a larger accumulation and cytotoxicity were observed in EATC compared to Lettré. The experiment was performed with cell medium exchange every fourth hour as HSA...

  13. Aromatic DNA adducts in human white blood cells and skin after dermal application of coal tar

    Energy Technology Data Exchange (ETDEWEB)

    Godschalk, R.W.L.; Ostertag, J.U.; Moonen, E.J.C.; Neumann, H.A.M.; Kleinjans, J.C.S.; Schooten, F.J. van [University of Maastricht, Maastricht (Netherlands). Dept. of Health Risk Analysis and Toxicology

    1998-09-01

    A group of eczema patients topically treated with coal tar (CT) ointments was used as a model population to examine the applicability of DNA adducts in white blood cell (WBC) subpopulations as a measure of dermal exposure to polycyclic aromatic hydrocarbons (PAHs). Aromatic DNA adducts were examined by {sup 32}P-postlabeling in exposed skin and WBC subsets, and urinary excretion of PAH metabolites was determined to assess the whole-body burden. The median urinary excretion of 1-hydroxypyrene and 3-hydroxybenzo(a)pyrene was 0.39 and 0.01 {mu}mol/mol creatinine respectively, before the dermal application of CT ointments. After treatment for 1 week, these levels increased to 139.7 and 1.18 {mu}mol/mol creatinine respectively, indicating that considerable amounts of PAHs were absorbed. Median aromatic DNA adduct levels were significantly increased in skin from 2.9 adduct/10{sup 8} nucleotides before treatment to 63.3 adducts/10{sup 8} nt after treatment with CT, in monocytes from 0.28 to 0.86 adducts/10{sup 8} nt, in lymphocytes from 0.33 to 0.89 adducts/10{sup 8} nt and in granulocytes from 0.28 to 0.54 adducts/10{sup 8} nt. A week after stopping the CT treatment, the DNA adduct levels in monocytes and granulocytes were reduced to 0.38 and 0.38 adducts/10{sup 8} nt respectively, whereas the adduct levels in lymphocytes remained enhanced. Total DNA adduct levels in skin correlated with the adduct levels in monocytes and lymphocytes. Excretion of urinary metabolites during the first week of treatment was correlated with the percentage of the skin surface treated with CT ointment and decreased within a week after the cessation of treatment. 3-Hydroxybenzo(a)pyrene excretion, correlated with the levels of DNA adducts in skin that comigrated with benzo(a)pyrene-diol-epoxide-DNA. This study indicates that the DNA adduct levels in mononuclear WBCs can possibly be used as a surrogate for skin DNA after dermal exposure to PAHs. 34 refs., 4 figs., 1 tab.

  14. Detection of Riddelliine-Derived DNA Adducts in Blood of Rats Fed Riddelliine

    Directory of Open Access Journals (Sweden)

    Ming W. Chou

    2002-09-01

    Full Text Available Abstract: We have previously shown that riddelliine, a naturally occurring genotoxic pyrrolizidine alkaloid, induces liver tumors in rats and mice through a genotoxic mechanism mediated by the formation of a set of eight 6,7-dihydro-7-hydroxy-1-hydroxymethyl-5Hpyrrolizine ( DHP-derived DNA adducts. In this study we report the formation of these DHP-derived DNA adducts in blood DNA of rats fed riddelliine. In an adduct formation and removal experiment, male and female F344 rats (8 weeks of age were administered riddelliine by gavage at a single dose of 10.0 mg/kg body weight in 0.1 M phosphate buffer. At 8, 24, 48, and 168 hrs after dosing, the levels of DHP-derived DNA adduct in blood and liver were determined by 32P-postlabeling/HPLC. Maximum DNA adduct formation occurred at 48 hr after treatment. From 48 to 168 hours, the adduct levels in female rat blood were 4-fold greater than those in male rats. In a dose response experiment, female rats were gavaged 0.1 and 1.0 mg/kg doses of riddelliine for three consecutive days and the DHPderived DNA adducts in blood DNA were assayed. The levels of the DHP-derived DNA adducts in blood of rats receiving 0.1 and 1.0 mg/kg doses were 12.9 and 51.8 adducts/107 nucleotides. These results suggest that: (i leucocyte DNA can bind with DHP to form a set of DHP-derived DNA adducts generated in liver; (ii DHP-derived DNA adducts in blood can serve as a potential non-invasive biomarkers for assessing the exposure to riddelliine.

  15. Differences in lysine adduction by acrolein and methyl vinyl ketone: implications for cytotoxicity in cultured hepatocytes.

    Science.gov (United States)

    Kaminskas, Lisa M; Pyke, Simon M; Burcham, Philip C

    2005-11-01

    Acrolein is a highly toxic environmental pollutant that readily alkylates the epsilon-amino group of lysine residues in proteins. In model systems, such chemistry involves sequential addition of two acrolein molecules to a given nitrogen, forming bis-Michael-adducted species that undergo aldol condensation and dehydration to form Nepsilon-(3-formyl-3,4-dehydropiperidino)lysine. Whether this ability to form cyclic adducts participates in the toxicity of acrolein is unknown. To address this issue, we compared the chemistry of protein adduction by acrolein to that of its close structural analogue methyl vinyl ketone, expecting that the alpha-methyl group would hinder the intramolecular cyclization of any bis-adducted species formed by methyl vinyl ketone. Both acrolein and methyl vinyl ketone displayed comparable protein carbonylating activity during in vitro studies with the model protein bovine serum albumin, confirming the alpha,beta,-unsaturated bond of both compounds is an efficient Michael acceptor for protein nucleophiles. However, differences in adduction chemistry became apparent during the use of electrospray ionization-MS to monitor reaction products in a lysine-containing peptide after modification by each compound. For example, although a Schiff base adduct was detected following reaction of the peptide with acrolein, an analogous species was not formed by methyl vinyl ketone. Furthermore, while ions corresponding to mono- and bis-Michael adducts were detected at the N-terminus and lysine residues following peptide modification by both carbonyls, only acrolein modification generated ions attributable to cyclic adducts. Despite these differences in adduction chemistry, in mouse hepatocytes, the two compounds exhibited very comparable abilities to induce rapid, concentration-dependent cell death as well as protein carbonylation. These findings suggest that the acute toxicity of short-chain alpha,beta-unsaturated carbonyl compounds involves their ability to

  16. Electrochemical Chloride extraction using external electrodes?

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Pedersen, Anne Juul

    2006-01-01

    Electrochemical methods for the removal of chloride from concrete have been developed and the methods are primarily designed for situations where corrosion has started due to an increased chloride concentration in the vicinity of the reinforcement. In these methods the reinforcement is used...... as the cathode. However, some unwanted side effects can occur, including alkali-silica reaction and in some cases hydrogen embrittlement. It is also suggested also to use electrochemical chloride extraction in a preventive way in constructions where chloride induced corrosion is likely to be a problem after...... a period of time, i.e. remove the chlorides before the chloride front reaches the reinforcement. If the chlorides are removed from outer few centimetres from the surface, the chloride will not reach the reinforcement and cause damage. By using the electrochemical chloride removal in this preventive way...

  17. Lubiprostone: a chloride channel activator.

    Science.gov (United States)

    Lacy, Brian E; Levy, L Campbell

    2007-04-01

    In January 2006 the Food and Drug Administration approved lubiprostone for the treatment of chronic constipation in men and women aged 18 and over. Lubiprostone is categorized as a prostone, a bicyclic fatty acid metabolite of prostaglandin E1. Lubiprostone activates a specific chloride channel (ClC-2) in the gastrointestinal (GI) tract to enhance intestinal fluid secretion, which increases GI transit and improves symptoms of constipation. This article reviews the role of chloride channels in the GI tract, describes the structure, function, and pharmacokinetics of lubiprostone, and discusses clinically important data on this new medication.

  18. Fullerene–Carbene Lewis Acid–Base Adducts

    KAUST Repository

    Li, Huaping

    2011-08-17

    The reaction between a bulky N-heterocylic carbene (NHC) and C60 leads to the formation of a thermally stable zwitterionic Lewis acid-base adduct that is connected via a C-C single bond. Low-energy absorption bands with weak oscillator strengths similar to those of n-doped fullerenes were observed for the product, consistent with a net transfer of electron density to the C60 core. Corroborating information was obtained using UV photoelectron spectroscopy, which revealed that the adduct has an ionization potential ∼1.5 eV lower than that of C60. Density functional theory calculations showed that the C-C bond is polarized, with a total charge of +0.84e located on the NHC framework and -0.84e delocalized on the C 60 cage. The combination of reactivity, characterization, and theoretical studies demonstrates that fullerenes can behave as Lewis acids that react with C-based Lewis bases and that the overall process describes n-doping via C-C bond formation. © 2011 American Chemical Society.

  19. Polymerization of Polar Monomers from a Theoretical Perspective

    KAUST Repository

    Alghamdi, Miasser

    2016-10-11

    Density functional theory calculations have been used to investigate catalytic mechanism of polymer formation containing polar groups, from the synthesis of the monomer to the synthesis of the macromolecule. In the spirit of a sustainable and green chemistry, we initially focused attention on the coupling of CO2 as economically convenient and recyclable C1 source with C2H4 to form acrylate and/or butirro-lactone, two important polar monomers. In this process formation of a mettallolactone via oxidative coupling of CO2 and C2H4 is an important intermediate. Given this background, we explored in detail (chapter-3) several Ni based catalysts for CO2 coupling with C2H4 to form acrylate. In this thesis we report on the competitive reaction mechanisms (inner vs outer sphere) for the oxidative coupling of CO2 and ethylene for a set of 11 Ni-based complexes containing bisphosphine ligands. In another effort, considering incorporation of a C=C bond into a metal-oxygen-Functional-Group moiety is a challenging step in several polymerization reactions, we explored the details of this reaction (chapter4) using two different catalysts that are capable to perform this reaction in the synthesis of heterocycles. Specifically, the [Rh]-catalyzed intramolecular alkoxyacylation ([Rh] = [RhI(dppp)+] (dppp, 1,3-Bis-diphenylphosphino-propane), and the [Pd]/BPh3 intramolecular alkoxyfunctionalizations. Rest of the thesis we worked on understanding the details of the polymerization of polar monomers using organocatalysts based on N-heterocyclic carbenes (NHC) or N-heterocyclic olefins (NHO). In particular (chapter-5) we studied the polymerization of N-methyl N-carboxy- anhydrides, towards cyclic poly(N-substituted glycine)s, promoted by NHC catalysts. In good agreement with the experimental findings, we demonstrated that NHC promoted ring opening polymerization of N-Me N-Carboxyanhydrides may proceed via two different catalytic pathways. In a similar effort we studied polymerization of

  20. 40 CFR 721.3680 - Ethylene oxide adduct of fatty acid ester with pentaerythritol.

    Science.gov (United States)

    2010-07-01

    ... ester with pentaerythritol. 721.3680 Section 721.3680 Protection of Environment ENVIRONMENTAL PROTECTION... New Uses for Specific Chemical Substances § 721.3680 Ethylene oxide adduct of fatty acid ester with... identified generically as ethylene oxide adduct of fatty acid ester with pentaerythritol (PMN P-91-442)...

  1. Exposure-route-dependent DNA adduct formation by polycyclic aromatic hydrocarbons

    NARCIS (Netherlands)

    Godschalk, R.W.L.; Moonen, E.J.C.; Schilderman, A.E.L.; Broekmans, W.M.R.; Kleinjans, J.C.S.; Schooten, F.J. van

    2000-01-01

    Understanding the kinetics of aromatic-DNA adducts in target tissues and white blood cells (WBC) would enhance the applicability of DNA adducts in WBC as surrogate source of DNA in biomonitoring studies. In the present study, rats were acutely exposed to benzo[a]pyrene (B[a]P; 10 mg/kg body wt) via

  2. Specific plant DNA adducts as molecular biomarkers of genotoxic atmospheric environments.

    Science.gov (United States)

    Weber-Lotfi, F; Obrecht-Pflumio, S; Guillemaut, P; Kleinpeter, J; Dietrich, A

    2005-03-01

    The general purpose of this study was to determine whether the formation of DNA addition products ('adducts') in plants could be a valuable biomarker of genotoxic air pollution. Plants from several species were exposed to ambient atmosphere at urban and suburban sites representative of different environmental conditions. The levels of NO2 and of the quantitatively major genotoxic air pollutants benzene, toluene, and xylene were monitored in parallel with plant exposure. DNA adducts were measured in bean (Phaseolus vulgaris), rye-grass (Lolium perenne), and tobacco (Nicotiana tabacum) seedlings by means of the [32P]-postlabeling method. Whereas, no correlation was found between the levels of the major genotoxic air pollutants and the total amounts of DNA adducts, individual analyses revealed site-specific and plant species-specific adduct responses, both at the qualitative and quantitative level. Among these, the amount of a specific rye-grass DNA adduct (rgs1) correlated with benzene/toluene/xylene levels above a threshold. For further characterization, rye-grass seedlings were treated in controlled conditions with benzene, toluene, xylene or their derivatives. On the other hand, in vitro DNA adduct formation assays were developed involving benzene, toluene, xylene, or their derivatives, and plant microsomes or purified peroxidase. Although in some cases, these approaches produced specific adduct responses, they failed to generate the rgs1 DNA adduct, which appeared to be characteristic for on-site test-plant exposure. Our studies have thus identified an interesting candidate for further analysis of environmental biomarkers of genotoxicity.

  3. Immunochemical detection of sulfur mustard adducts with keratins in the stratum corneum of human skin

    NARCIS (Netherlands)

    Schans, G.P. van der; Noort, D.; Mars-Groenendijk, R.H.; Fidder, A.; Chau, L.F.; Jong, L.P.A. de; Benschop, H.P.

    2002-01-01

    As part of a program to develop methods for diagnosis of exposure to chemical warfare agents, we developed immunochemical methods for detection of adducts of sulfur mustard to keratin in human skin. Three partial sequences of keratins containing glutamine or asparagine adducted with a

  4. On adduct formation and reactivity in the OCS plus OH reaction

    DEFF Research Database (Denmark)

    Schmidt, Johan Albrecht; Kyte, Mildrid; Østerstrøm, Freja From

    2017-01-01

    The OCS + OH reaction occurs either via adduct formation or direct S-abstraction. We investigate OH-oxidation of OCS using quantum chemical methods and find that the OC(OH)S adduct reacts rapidly with O2forming SOOH + CO2. SOOH rapidly dissociates under atmospheric conditions regenerating OH. We...

  5. Lewis pair polymerization by classical and frustrated Lewis pairs: acid, base and monomer scope and polymerization mechanism.

    Science.gov (United States)

    Zhang, Yuetao; Miyake, Garret M; John, Mallory G; Falivene, Laura; Caporaso, Lucia; Cavallo, Luigi; Chen, Eugene Y-X

    2012-08-14

    Classical and frustrated Lewis pairs (LPs) of the strong Lewis acid (LA) Al(C(6)F(5))(3) with several Lewis base (LB) classes have been found to exhibit exceptional activity in the Lewis pair polymerization (LPP) of conjugated polar alkenes such as methyl methacrylate (MMA) as well as renewable α-methylene-γ-butyrolactone (MBL) and γ-methyl-α-methylene-γ-butyrolactone (γ-MMBL), leading to high molecular weight polymers, often with narrow molecular weight distributions. This study has investigated a large number of LPs, consisting of 11 LAs as well as 10 achiral and 4 chiral LBs, for LPP of 12 monomers of several different types. Although some more common LAs can also be utilized for LPP, Al(C(6)F(5))(3)-based LPs are far more active and effective than other LA-based LPs. On the other hand, several classes of LBs, when paired with Al(C(6)F(5))(3), can render highly active and effective LPP of MMA and γ-MMBL; such LBs include phosphines (e.g., P(t)Bu(3)), chiral chelating diphosphines, N-heterocyclic carbenes (NHCs), and phosphazene superbases (e.g., P(4)-(t)Bu). The P(4)-(t)Bu/Al(C(6)F(5))(3) pair exhibits the highest activity of the LP series, with a remarkably high turn-over frequency of 9.6 × 10(4) h(-1) (0.125 mol% catalyst, 100% MMA conversion in 30 s, M(n) = 2.12 × 10(5) g mol(-1), PDI = 1.34). The polymers produced by LPs at RT are typically atactic (P(γ)MMBL with ∼47% mr) or syndio-rich (PMMA with ∼70-75% rr), but highly syndiotactic PMMA with rr ∼91% can be produced by chiral or achiral LPs at -78 °C. Mechanistic studies have identified and structurally characterized zwitterionic phosphonium and imidazolium enolaluminates as the active species of the current LPP system, which are formed by the reaction of the monomer·Al(C(6)F(5))(3) adduct with P(t)Bu(3) and NHC bases, respectively. Kinetic studies have revealed that the MMA polymerization by the (t)Bu(3)P/Al(C(6)F(5))(3) pair is zero-order in monomer concentration after an initial

  6. Lewis pair polymerization by classical and frustrated Lewis pairs: Acid, base and monomer scope and polymerization mechanism

    KAUST Repository

    Zhang, Yuetao

    2012-01-01

    Classical and frustrated Lewis pairs (LPs) of the strong Lewis acid (LA) Al(C 6F 5) 3 with several Lewis base (LB) classes have been found to exhibit exceptional activity in the Lewis pair polymerization (LPP) of conjugated polar alkenes such as methyl methacrylate (MMA) as well as renewable α-methylene-γ-butyrolactone (MBL) and γ-methyl- α-methylene-γ-butyrolactone (γ-MMBL), leading to high molecular weight polymers, often with narrow molecular weight distributions. This study has investigated a large number of LPs, consisting of 11 LAs as well as 10 achiral and 4 chiral LBs, for LPP of 12 monomers of several different types. Although some more common LAs can also be utilized for LPP, Al(C 6F 5) 3-based LPs are far more active and effective than other LA-based LPs. On the other hand, several classes of LBs, when paired with Al(C 6F 5) 3, can render highly active and effective LPP of MMA and γ-MMBL; such LBs include phosphines (e.g., P tBu 3), chiral chelating diphosphines, N-heterocyclic carbenes (NHCs), and phosphazene superbases (e.g., P 4- tBu). The P 4- tBu/Al(C 6F 5) 3 pair exhibits the highest activity of the LP series, with a remarkably high turn-over frequency of 9.6 × 10 4 h -1 (0.125 mol% catalyst, 100% MMA conversion in 30 s, M n = 2.12 × 10 5 g mol -1, PDI = 1.34). The polymers produced by LPs at RT are typically atactic (P γMMBL with ∼47% mr) or syndio-rich (PMMA with ∼70-75% rr), but highly syndiotactic PMMA with rr ∼91% can be produced by chiral or achiral LPs at -78 °C. Mechanistic studies have identified and structurally characterized zwitterionic phosphonium and imidazolium enolaluminates as the active species of the current LPP system, which are formed by the reaction of the monomer·Al(C 6F 5) 3 adduct with P tBu 3 and NHC bases, respectively. Kinetic studies have revealed that the MMA polymerization by the tBu 3P/ Al(C 6F 5) 3 pair is zero-order in monomer concentration after an initial induction period, and the polymerization

  7. Comparison of EMG activity on abdominal muscles during plank exercise with unilateral and bilateral additional isometric hip adduction.

    Science.gov (United States)

    Kim, Soo-Yong; Kang, Min-Hyeok; Kim, Eui-Ryong; Jung, In-Gui; Seo, Eun-Young; Oh, Jae-Seop

    2016-10-01

    The aim of this study was to investigate the effects of additional isometric hip adduction during the plank exercise on the abdominal muscles. Twenty healthy young men participated in this study. Surface electromyography (EMG) was used to monitor the activity of the bilateral rectus abdominis (RA), the internal oblique (IO), and the external oblique (EO) muscles. The participants performed three types of plank exercise; the standard plank exercise, the plank exercise with bilateral isometric hip adduction, and the plank exercise with unilateral isometric hip adduction. All abdominal muscle activity was significantly increased during the plank exercise combined with the bilateral and unilateral isometric hip adduction compared with the standard plank exercise (pmuscle activity was significantly increased during the unilateral isometric hip adduction compared with the bilateral isometric hip adduction (pabdominal muscle activity. In particular, the unilateral isometric hip adduction is a more beneficial exercise than the bilateral isometric hip adduction.

  8. Quantitation of 4,4′-methylene diphenyl diisocyanate human serum albumin adducts

    Directory of Open Access Journals (Sweden)

    Leah G. Luna

    2014-01-01

    Full Text Available 4,4′-Methylene diphenyl diisocyanate (herein 4,4′-MDI is used in the production of polyurethane foams, elastomers, coatings, adhesives and the like for a wide range of commercial products. Occupational exposure to MDI levels above current airborne exposure limits can elicit immune mediated hypersensitivity reactions such as occupational asthma in sensitive individuals. To accurately determine exposure, there has been increasing interest in developing analytical methods to measure internal biomarkers of exposure to MDI. Previous investigators have reported methodologies for measuring MDI diamine metabolites and MDI-Lysine (4,4′-MDI-Lys adducts. The purpose of this study was to develop and validate an ultra performance liquid chromatography isotope dilution tandem mass spectrometry (UPLC-ID/MS/MS quantitation method via a signature peptide approach to enable biomonitoring of 4,4′-MDI adducted to human serum albumin (HSA in plasma. A murine, anti-4,4′-MDI monoclonal IgM antibody was bound to magnetic beads and utilized for enrichment of the MDI adducted HSA. Following enrichment, trypsin digestion was performed to generate the expected 414 site (primary site of adduction 4,4′-MDI-adducted HSA signature peptide that was quantified by UPLC-ID/MS/MS. An Agilent 6530 UPLC/quadrupole time of flight MS (QTOF system was utilized for intact adducted protein analysis and an Agilent 6490 UPLC/MS/MS system operated in multiple reaction monitoring (MRM mode was utilized for quantification of the adducted signature peptide biomarker both for in chemico and worker serum samples. Worker serum samples were initially screened utilizing the previously developed 4,4′-MDI-Lys amino acid method and results showed that 12 samples were identified as quantifiable for 4,4′-MDI-Lys adducts. The signature peptide adduct approach was applied to the 12 worker samples identified as quantifiable for 4,4′-MDI-Lys adducts. Results indicated no positive results

  9. Polymerization of nonfood biomass-derived monomers to sustainable polymers.

    Science.gov (United States)

    Zhang, Yuetao; Chen, Eugene Y-X

    2014-01-01

    The development of sustainable routes to fine chemicals, liquid fuels, and polymeric materials from natural resources has attracted significant attention from academia, industry, the general public, and governments owing to dwindling fossil resources, surging energy demand, global warming concerns, and other environmental problems. Cellulosic material, such as grasses, trees, corn stover, or wheat straw, is the most abundant nonfood renewable biomass resources on earth. Such annually renewable material can potentially meet our future needs with a low carbon footprint if it can be efficiently converted into fuels, value added chemicals, or polymeric materials. This chapter focuses on various renewable monomers derived directly from cellulose or cellulose platforms and corresponding sustainable polymers or copolymers produced therefrom. Recent advances related to the polymerization processes and the properties of novel biomass-derived polymers are also reviewed and discussed.

  10. Biosynthesis of monomers for plastics from renewable oils.

    Science.gov (United States)

    Lu, Wenhua; Ness, Jon E; Xie, Wenchun; Zhang, Xiaoyan; Minshull, Jeremy; Gross, Richard A

    2010-11-03

    Omega-hydroxyfatty acids are excellent monomers for synthesizing a unique family of polyethylene-like biobased plastics. However, ω-hydroxyfatty acids are difficult and expensive to prepare by traditional organic synthesis, precluding their use in commodity materials. Here we report the engineering of a strain of the diploid yeast Candida tropicalis to produce commercially viable yields of ω-hydroxyfatty acids. To develop the strain we identified and eliminated 16 genes encoding 6 cytochrome P450s, 4 fatty alcohol oxidases, and 6 alcohol dehydrogenases from the C. tropicalis genome. We also show that fatty acids with different chain lengths and degrees of unsaturation can be more efficiently oxidized by expressing different P450s within this strain background. Biocatalysis using engineered C. tropicalis is thus a potentially attractive biocatalytic platform for producing commodity chemicals from renewable resources.

  11. Production and monomer composition of exopolysaccharides by yogurt starter cultures.

    Science.gov (United States)

    Frengova, G I; Simova, E D; Beshkova, D M; Simov, Z I

    2000-12-01

    As components of starter cultures for Bulgarian yogurt, Streptococcus salivarius subsp. thermophilus and Lactobacillus delbrueckii subsp. bulgaricus revealed extensive exopolysaccharide (EPS) production activity when cultivated in whole cow's milk. The polymer-forming activity of thermophilic streptococci was lower (230-270 mg EPS/L) than that of the lactobacilli (400-540 mg EPS/L). Mixed cultures stimulated EPS production in yogurt manufacture, and a maximum concentration of 720-860 mg EPS/L was recorded after full coagulation of milk. The monomer structure of the exopolysaccharides formed by the yogurt starter cultures principally consists of galactose and glucose (1:1), with small amounts of xylose, arabinose, and/or mannose.

  12. Biobased Epoxy Nanocomposites Derived from Lignin-Based Monomers.

    Science.gov (United States)

    Zhao, Shou; Abu-Omar, Mahdi M

    2015-07-13

    Biobased epoxy nanocomposites were synthesized based on 2-methoxy-4-propylphenol (dihydroeugenol, DHE), a molecule that has been obtained from the lignin component of biomass. To increase the content of hydroxyl groups, DHE was o-demethylated using aqueous HBr to yield propylcatechol (DHEO), which was subsequently glycidylated to epoxy monomer. Optimal conditions in terms of yield and epoxy equivalent weight were found to be 60 °C with equal NaOH/phenolic hydroxyl molar ratio. The structural evolution from DHE to cured epoxy was followed by (1)H NMR and Fourier transform infrared spectroscopy. The nano-montmorillonite modified DHEO epoxy exhibited improved storage modulus and thermal stability as determined from dynamic mechanical analysis and thermogravimetric analysis. This study widens the synthesis routes of biobased epoxy thermosets from lignin-based molecules.

  13. Liquid chromatography-thermospray mass spectrometry of DNA adducts formed with mitomycin C, porfiromycin and thiotepa.

    Science.gov (United States)

    Musser, S M; Pan, S S; Callery, P S

    1989-07-14

    High-performance liquid chromatography (HPLC) and thermospray mass spectrometry were combined for the analysis of DNA adducts formed from the interaction of the anticancer drugs mitomycin C, porfiromycin and thiotepa with calf thymus DNA. The adducts formed from reaction of mitomycin C and porfiromycin with DNA were separated from unmodified nucleosides by HPLC on a C18 column and identified by thermospray mass spectrometry. Thiotepa DNA adducts readily depurinated from DNA and were chromatographed and identified by thermospray liquid chromatography-mass spectrometry as the modified bases without the ribose moiety attached. The utility of thermospray mass spectrometry for the identification of microgram quantities of nucleoside adducts and depurinated base adducts of these anticancer drugs was demonstrated.

  14. Exposing Differences in Monomer Exchange Rates of Multicomponent Supramolecular Polymers in Water.

    Science.gov (United States)

    Baker, Matthew B; Gosens, Ronald P J; Albertazzi, Lorenzo; Matsumoto, Nicholas M; Palmans, Anja R A; Meijer, E W

    2016-02-02

    The formation of multicomponent and bioactive supramolecular polymers is a promising strategy for the formation of biomaterials that match the dynamic and responsive nature of biological systems. In order to fully realize the potential of this strategy, knowledge of the location and behavior of bioactive components within the system is crucial. By employing synthetic strategies to create multifunctional monomers, coupled with FRET and STORM techniques, we have investigated the formation and behavior of a bioactive and multicomponent supramolecular polymer. By creating a peptide-dye-monomer conjugate, we were able to measure high degrees of monomer incorporation and to visualize the equal distribution of monomers within the supramolecular polymer. Furthermore, by tracking the movement of monomers, we uncovered small differences in the dynamics of the bioactive monomers.

  15. Chloride : The queen of electrolytes?

    NARCIS (Netherlands)

    Berend, Kenrick; van Hulsteijn, Leonard Hendrik; Gans, Rijk O. B.

    2012-01-01

    Background: Channelopathies, defined as diseases that are caused by mutations in genes encoding ion channels, are associated with a wide variety of symptoms and have been documented extensively over the past decade. In contrast, despite the important role of chloride in serum, textbooks in general d

  16. 1,5-Diaminotetrazolium chloride

    Directory of Open Access Journals (Sweden)

    Ling-Qiao Meng

    2010-04-01

    Full Text Available The title compound, CH5N6+·Cl−, crystallized with two indepedent 1,5-diaminotetrazolium cations and two independent chloride anions in the asymmetric unit. In the crystal, there are a number of N—H...Cl hydrogen-bonding interactions, which generate a three-dimensional network.

  17. [Headspace GC/MS analysis of residual vinyl chloride and vinylidene chloride in polyvinyl chloride and polyvinylidene chloride products].

    Science.gov (United States)

    Ohno, Hiroyuki; Mutsuga, Motoh; Kawamura, Yoko; Suzuki, Masako; Aoyama, Taiki

    2005-02-01

    A headspace GC/MS analysis method for the simultaneous determination of residual vinyl chloride (VC) and vinylidene chloride (VDC) in polyvinyl chloride (PVC) and polyvinylidene chloride (PVDC) products was developed. A test sample was swelled overnight with N,N-dimethylacetamide in a sealed vial. The vial was incubated for 1 hour at 90 degrees C, then the headspace gas was analyzed by GC/MS using a PLOT capillary column. The recoveries from spiked PVC and PVDC samples were 90.0-112.3% for VC and 85.2-108.3% for VDC. The determination limits were 0.01 microg/g for VC and 0.06/microg/g for VDC, respectively. By this method, VC was detected in two PVC water supply pipes at the levels of 0.61 and 0.01 microg/g. On the other hand, VC and VDC were not detected in any of the food container-packages or toys tested.

  18. Line narrowing spectroscopic studies of DNA-carcinogen adducts and DNA-dye complexes

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Myungkoo

    1995-12-06

    Laser-induced fluorescence line narrowing and non-line narrowing spectroscopic methods were applied to conformational studies of stable DNA adducts of the 7{beta}, 8{alpha}-dihydoxy-9{alpha}, l0{alpha}-epoxy-7,8,9, 10-tetrahydrobenzo[{alpha}]pyrene (anti-BPDE). Stereochemically distinct (+)-trans-, ({minus})-trans-, (+)-cis- and ({minus})-cis adducts of anti-BPDE bound to exocyclic amino group of the central guanine in an 11-mer oligonucleotide, exist in a mixture of conformations in frozen aqueous buffer matrices. The (+)-trans adduct adopts primarily an external conformation with a smaller fraction ( {approximately} 25 %) exists in a partially base-stacked conformation. Both cis adducts were found to be intercalated with significant {pi}-{pi} stacking interactions between the pyrenyl residues and the bases. Conformations of the trans-adduct of (+)-anti -BPDE in 11-mer oligonucleotides were studied as a function of flanking bases. In single stranded form the adduct at G{sub 2} or G{sub 3} (5 ft-flanking, base guanine) adopts a conformation with strong, interaction with the bases. In contrast, the adduct with a 5ft-flanking, thymine exists in a primarily helixexternal conformation. Similar differences were observed in the double stranded oligonucleotides. The nature of the 3ft-flanking base has little influence on the conformational equilibrium of the (+)-trans-anti BPDE-dG adduct. The formation and repair of BPDE-N{sup 2}-dG in DNA isolated from the skin of mice treated topically with benzo[{alpha}]pyrene (BP) was studied. Low-temperature fluorescence spectroscopy of the intact DNA identified the major adduct as (+)-trans-anti-BPDE-N-dG, and the minor adduct fraction consisted mainly of (+)-cis-anti-BPDE-N{sup 2}-dG.

  19. Line narrowing spectroscopic studies of DNA-carcinogen adducts and DNA-dye complexes

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Myungkoo [Iowa State Univ., Ames, IA (United States)

    1995-12-06

    Laser-induced fluorescence line narrowing and non-line narrowing spectroscopic methods were applied to conformational studies of stable DNA adducts of the 7β, 8α-dihydoxy-9α, l0α-epoxy-7,8,9, 10-tetrahydrobenzo[α]pyrene (anti-BPDE). Stereochemically distinct (+)-trans-, (-)-trans-, (+)-cis- and (-)-cis adducts of anti-BPDE bound to exocyclic amino group of the central guanine in an 11-mer oligonucleotide, exist in a mixture of conformations in frozen aqueous buffer matrices. The (+)-trans adduct adopts primarily an external conformation with a smaller fraction ( ~25 %) exists in a partially base-stacked conformation. Both cis adducts were found to be intercalated with significant π-π stacking interactions between the pyrenyl residues and the bases. Conformations of the trans-adduct of (+)-anti -BPDE in 11-mer oligonucleotides were studied as a function of flanking bases. In single stranded form the adduct at G2 or G3 (5 ft-flanking, base guanine) adopts a conformation with strong, interaction with the bases. In contrast, the adduct with a 5ft-flanking, thymine exists in a primarily helixexternal conformation. Similar differences were observed in the double stranded oligonucleotides. The nature of the 3ft-flanking base has little influence on the conformational equilibrium of the (+)-trans-anti BPDE-dG adduct. The formation and repair of BPDE-N2-dG in DNA isolated from the skin of mice treated topically with benzo[α]pyrene (BP) was studied. Low-temperature fluorescence spectroscopy of the intact DNA identified the major adduct as (+)-trans-anti-BPDE-N-dG, and the minor adduct fraction consisted mainly of (+)-cis-anti-BPDE-N2-dG.

  20. Use of Monomer Fraction Data in the Parametrization of Association Theories

    DEFF Research Database (Denmark)

    Kontogeorgis, Georgios; Tsivintzelis, Ioannis; von Solms, Nicolas;

    2010-01-01

    “improved” model parameters can be obtained if monomer fraction data are included in the parameter estimation together with vapor pressures and liquid densities. The expression “improved” implies parameters which can represent several pure compound properties as well as monomer fraction data for pure......, liquid densities and monomer fractions of water and alcohols. The 4C scheme is the best choice for water, while for methanol there is small difference between the 2B and 3B association schemes....

  1. Enzymatic Specific Production and Chemical Functionalization of Phenylpropanone Platform Monomers from Lignin

    OpenAIRE

    Ohta, Yukari; Hasegawa, Ryoichi; Kurosawa, Kanako; Maeda, Allyn H.; Koizumi, Toshio; Nishimura,Hiroshi; Okada, Hitomi; Qu, Chen; Saito, Kaori; Watanabe, Takashi; Hatada, Yuji

    2016-01-01

    Abstract Enzymatic catalysis is an ecofriendly strategy for the production of high‐value low‐molecular‐weight aromatic compounds from lignin. Although well‐definable aromatic monomers have been obtained from synthetic lignin‐model dimers, enzymatic‐selective synthesis of platform monomers from natural lignin has not been accomplished. In this study, we successfully achieved highly specific synthesis of aromatic monomers with a phenylpropane structure directly from natural lignin using a casca...

  2. 21 CFR 173.375 - Cetylpyridinium chloride.

    Science.gov (United States)

    2010-04-01

    ... CONSUMPTION Specific Usage Additives § 173.375 Cetylpyridinium chloride. Cetylpyridinium chloride (CAS Reg. No... Nutrition's Library, Food and Drug Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, or...

  3. Organocatalytic conjugate-addition polymerization of linear and cyclic acrylic monomers by N-heterocyclic carbenes: Mechanisms of chain initiation, propagation, and termination

    KAUST Repository

    Zhang, Yuetao

    2013-11-27

    This contribution presents a full account of experimental and theoretical/computational investigations into the mechanisms of chain initiation, propagation, and termination of the recently discovered N-heterocyclic carbene (NHC)-mediated organocatalytic conjugate-addition polymerization of acrylic monomers. The current study specifically focuses on three commonly used NHCs of vastly different nucleophilicity, 1,3-di-tert-butylimidazolin-2-ylidene (ItBu), 1,3- dimesitylimidazolin-2-ylidene (IMes), and 1,3,4-triphenyl-4,5-dihydro-1H-1,2,4- triazol-5-ylidene (TPT), and two representative acrylic monomers, the linear methyl methacrylate (MMA) and its cyclic analog, biomass-derived renewable γ-methyl-α-methylene-γ-butyrolactone (MMBL). For MMA, there exhibits an exquisite selectivity of the NHC structure for the three types of reactions it promotes: enamine formation (single-monomer addition) by IMes, dimerization (tail-to-tail) by TPT, and polymerization by ItBu. For MMBL, all three NHCs promote no dimerization but polymerization, with the polymerization activity being highly sensitive to the NHC structure and the solvent polarity. Thus, ItBu is the most active catalyst of the series and converts quantitatively 1000-3000 equiv of MMBL in 1 min or 10 000 equiv in 5 min at room temperature to MMBL-based bioplastics with a narrow range of molecular weights of Mn = 70-85 kg/mol, regardless of the [MMBL]/[ItBu] ratio employed. The ItBu-catalyzed MMBL polymerization reaches an exceptionally high turnover frequency up to 122 s -1 and a high initiator efficiency value up to 1600%. Unique chain-termination mechanisms have been revealed, accounting for the production of relative high-molecular-weight linear polymers and the catalytic nature of this NHC-mediated conjugate-addition polymerization. Computational studies have provided mechanistic insights into reactivity and selectivity between two competing pathways for each NHC-monomer zwitterionic adduct, namely enamine

  4. Progress of Carbonation in Chloride Contaminated Concretes

    OpenAIRE

    Wang, Yaocheng; Basheer, P. A.M.; Nanukuttan, S; Bai, Y.

    2016-01-01

    Concretes used in marine environment are generally under the cyclic effect of CO2 and chloride ions (Cl-). To date, the influence of carbonation on ingress of chloride ions in concretes has been widely studied; in comparison, study on the influence of Cl- on the progress of carbonation is limited. During the study, concretes were exposed to independent and combined mechanisms of carbonation and chloride ingress regimes. Profiles of apparent pH and chloride concentration were used to indicate ...

  5. Microbial reductive dehalogenation of vinyl chloride

    Energy Technology Data Exchange (ETDEWEB)

    Spormann, Alfred M [Stanford, CA; Muller, Jochen A [Baltimore, MD; Rosner, Bettina M [Berlin, DE; Von Abendroth, Gregory [Mannheim, DE; Meshulam-Simon, Galit [Los Angeles, CA; McCarty, Perry L [Stanford, CA

    2014-02-11

    Compositions and methods are provided that relate to the bioremediation of chlorinated ethenes, particularly the bioremediation of vinyl chloride by Dehalococcoides-like organisms. An isolated strain of bacteria, Dehalococcoides sp. strain VS, that metabolizes vinyl chloride is provided; the genetic sequence of the enzyme responsible for vinyl chloride dehalogenation; methods of assessing the capability of endogenous organisms at an environmental site to metabolize vinyl chloride; and a method of using the strains of the invention for bioremediation.

  6. Glassy dynamics of model colloidal polymers: The effect of "monomer" size

    Science.gov (United States)

    Li, Jian; Zhang, Bo-kai; Li, Hui-shu; Chen, Kang; Tian, Wen-de; Tong, Pei-qing

    2016-05-01

    In recent years, attempts have been made to assemble colloidal particles into chains, which are termed "colloidal polymers." An apparent difference between molecular and colloidal polymers is the "monomer" size. Here, we propose a model to represent the variation from molecular polymer to colloidal polymer and study the quantitative differences in their glassy dynamics. For chains, two incompatible local length scales, i.e., monomer size and bond length, are manifested in the radial distribution function and intramolecular correlation function. The mean square displacement of monomers exhibits Rouse-like sub-diffusion at intermediate time/length scale and the corresponding exponent depends on the volume fraction and the monomer size. We find that the threshold volume fraction at which the caging regime emerges can be used as a rescaling unit so that the data of localization length versus volume fraction for different monomer sizes can gather close to an exponential curve. The increase of monomer size effectively increases the hardness of monomers and thus makes the colloidal polymers vitrify at lower volume fraction. Static and dynamic equivalences between colloidal polymers of different monomer sizes have been discussed. In the case of having the same peak time of the non-Gaussian parameter, the motion of monomers of larger size is much less non-Gaussian. The mode-coupling critical exponents for colloidal polymers are in agreement with that of flexible bead-spring chains.

  7. Studies on the Influence of Monomers on the Performance Properties of Epoxy Acrylate Resin

    Directory of Open Access Journals (Sweden)

    Amrita Sharma

    2008-01-01

    Full Text Available Twelve blend samples were prepared by physical mixing of epoxy acrylate resins with various monomers viz. ethoxylated phenol monoacrylate (EOPA, tripropylene glycol diacrylate (TPGDA and trimethylol propane tri acrylate(TMPTA, having weight ratio of epoxy acrylate resin and monomers are 50:50, 60:40, 70:30, 80:20. These samples were cured under UV radiation using 5% photo initiator by weight. These blends were evaluated for mechanical, chemical & thermal properties. It was found that the sample having mono & tri functional monomers shows better properties than the samples having di functional monomer.

  8. Cystic Fibrosis (CF): Chloride Sweat Test

    Science.gov (United States)

    ... Old Feeding Your 1- to 2-Year-Old Cystic Fibrosis (CF) Chloride Sweat Test KidsHealth > For Parents > Cystic Fibrosis (CF) Chloride Sweat Test Print A A A ... It Is A chloride sweat test helps diagnose cystic fibrosis (CF) , an inherited disorder that makes kids sick ...

  9. 21 CFR 184.1426 - Magnesium chloride.

    Science.gov (United States)

    2010-04-01

    ... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in aqueous... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O,...

  10. 75 FR 33824 - Barium Chloride From China

    Science.gov (United States)

    2010-06-15

    ... COMMISSION Barium Chloride From China Determination On the basis of the record\\1\\ developed in the subject... order on barium chloride from China would be likely to lead to continuation or recurrence of material... Barium Chloride from China: Investigation No. 731-TA-149 (Third Review). By order of the...

  11. 75 FR 19657 - Barium Chloride From China

    Science.gov (United States)

    2010-04-15

    ... COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Notice of... chloride from China. SUMMARY: The Commission hereby gives notice that it will proceed with a full review... revocation of the antidumping duty order on barium chloride from China would be likely to lead...

  12. 21 CFR 172.180 - Stannous chloride.

    Science.gov (United States)

    2010-04-01

    ... Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely used for color... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR...

  13. 21 CFR 582.5446 - Manganese chloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5446 Manganese chloride. (a) Product. Manganese chloride. (b) Conditions of use....

  14. 连锁聚合机理与单体结构和活性种匹配关系的讨论%Discussing About Matching of Mechanism of Chain Polymerization with Monomer Structure and Reactive Species

    Institute of Scientific and Technical Information of China (English)

    童彬; 徐玲

    2012-01-01

    The mechanism of chain polymerization may be understood easily by monomer structure and reactive species, which is cleanly the criteria of the choosing monomers. For vinyl monomer, induction effect of electron withdrawing substituent, electron supplying substituent and conjugation effect have the correlation of anionic polymerization, cationic polymerization and radical polymerization. Radical polymerization of vinyl chloride can be in contrast to cationic polymerization of isobutylene, while the anionic polymerization of monomer with electron withdrawing substituent can be in contrast to cationic polymerization of monomer with electron supplying substituent. Monomer with conjugation effect substituent might be easily polymerized by the above three kinds of method. Monomer reactive can be semi-quantitatively characterized by Q value, a value, pKa and polymerization heat, which is summarized, therefore monomers are easily chosen by solving the crossing influence of factors. During chain polymerization monomer has to match initiator.%在连锁聚合中,聚合机理与单体结构和活性种有关,明确选择单体的标准。分析乙烯基单体取代基吸电子、供电子诱导效应和共轭效应与单体阴离子聚合、阳离子聚合和自由基聚合相关性:氯乙烯只能自由基聚合,而异丁烯仅能阳离子聚合;单体具有吸电子效应的基团,容易进行阴离子聚合;单体具有供电子效应的基团易阳离子聚合;单体具有共轭效应的基团,可以进行三种聚合。归纳用Q值、σ值、pKa和聚合热半定量考察单体活性的知识体系,剖析影响选择单体各因素的交叉作用这一难点;理解单体与引发剂的匹配进行连锁聚合。

  15. Muonium adducts of benzaldehyde: Structural correlation with nitroxides

    Energy Technology Data Exchange (ETDEWEB)

    Rhodes, C.J. [John Moores University, School of Pharmacy and Chemistry (United Kingdom); Reid, I.D. [Paul Scherrer Institute (Switzerland); Jackson, R.A. [University of Sussex, School of Chemistry and Molecular Sciences (United Kingdom)

    1997-04-15

    We have formed adduct radicals (ArCHOMu{center_dot}) by muonium addition to the carbonyl group of benzaldehyde and its derivatives. The muon coupling is found to be highly sensitive to the nature of substituents in the benzene ring, being increased by electron releasing groups. Similarly, the {sup 14}N coupling in a series of nitroxides [ArN(O{center_dot})OSiEt{sub 3}], measured using ESR spectroscopy, is increased by electron releasing substituents and a linear correlation is found between the two; their connected nature is discussed.For the radical derived from benzaldehyde itself, a strong dependence is also found on the solvent in which it is solved. We suggest that this may be used in the study of solvent effects, particularly H-bonding, pertinent to organic and bioorganic media.

  16. Influence of template/functional monomer/cross‐linking monomer ratio on particle size and binding properties of molecularly imprinted nanoparticles

    DEFF Research Database (Denmark)

    Yoshimatsu, Keiichi; Yamazaki, Tomohiko; Chronakis, Ioannis S.

    2012-01-01

    A series of molecularly imprinted polymer nanoparticles have been synthesized employing various template/functional monomer/crosslinking monomer ratio and characterized in detail to elucidate the correlation between the synthetic conditions used and the properties (e.g., particle size and template...... tuning of particle size and binding properties are required to fit practical applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012...

  17. Hemoglobin adducts of N-substituted aryl compounds in exposure control and risk assessment.

    Science.gov (United States)

    Neumann, H G; Birner, G; Kowallik, P; Schütze, D; Zwirner-Baier, I

    1993-03-01

    Arylamines, nitroarenes, and azo dyes yield a common type of metabolite, the nitroarene, which produces a hydrolyzable adduct with protein and is closely related to the critical, ultimate toxic and genotoxic metabolite. The target dose as measured by hemoglobin adducts in erythrocytes reflects not only the actual uptake from the environment but also an individual's capacity for metabolic activation and is therefore an improved dosimeter for human exposure. The usefulness of hemoglobin adducts in molecular epidemiology is now widely recognized. With regard to risk assessment, many questions need to be answered. The described experiments in rats address some of these questions. The relationship between binding to hemoglobin in erythrocytes and to proteins in plasma has been found to vary considerably for a number of diamines. The fraction of hydrolyzable adducts out of the total protein adducts formed also varies in both compartments. This indicates that the kind of circulating metabolites and their availability in different compartments is compound specific. This has to do with the complex pattern of competing metabolic pathways, and the role of N-acetylation and deacetylation is emphasized. An example of nonlinear dose dependence adds to the complexity. Analysis of hemoglobin adducts reveals interesting insights into prevailing pathways, which not only apply to the chemical, but may also be useful to assess an individual's metabolic properties. In addition, it is demonstrated that the greater part of erythrocytes and benzidine-hemoglobin adducts are eliminated randomly in rats, i.e., following first-order kinetics.

  18. Aminoguanidine pyridoxal adduct is superior to aminoguanidine for preventing diabetic nephropathy in mice.

    Science.gov (United States)

    Miyoshi, H; Taguchi, T; Sugiura, M; Takeuchi, M; Yanagisawa, K; Watanabe, Y; Miwa, I; Makita, Z; Koike, T

    2002-07-01

    Aminoguanidine inhibits the formation of advanced glycation end-products, and has been extensively examined in animals. However, administration of aminoguanidine decreases the hepatic content of pyridoxal phosphate. In order to avoid this problem, we developed an aminoguanidine pyridoxal Schiff base adduct and examined its efficacy in vitro as well as in a model of diabetic nephropathy. Mice with streptozotocin-induced diabetes were treated with aminoguanidine or aminoguanidine pyridoxal adduct for 9 weeks. An in vitro study was also performed to assess the antioxidant activity of aminoguanidine and its pyridoxal adduct. Neither drug altered glycemic control. Aminoguanidine pyridoxal adduct significantly improved urinary albumin excretion by 78.1 % compared with the diabetic control, and also had a better preventive effect on the progression of renal pathology than aminoguanidine did. Inhibition of glycation by both drugs was similar, but the antioxidant activity of the pyridoxal adduct was far superior. These findings suggest that aminoguanidine pyridoxal adduct may be superior to aminoguanidine, as it not only prevents vitamin B6 deficiency but is also better at controlling diabetic nephropathy, as this adduct inhibits oxidation as well as glycation.

  19. Polycyclic Aromatic Hydrocarbon (PAH Exposure and DNA Adduct Semi-Quantitation in Archived Human Tissues

    Directory of Open Access Journals (Sweden)

    M. Margaret Pratt

    2011-06-01

    Full Text Available Polycyclic aromatic hydrocarbons (PAHs are combustion products of organic materials, mixtures of which contain multiple known and probable human carcinogens. PAHs occur in indoor and outdoor air, as well as in char-broiled meats and fish. Human exposure to PAHs occurs by inhalation, ingestion and topical absorption, and subsequently formed metabolites are either rendered hydrophilic and excreted, or bioactivated and bound to cellular macromolecules. The formation of PAH-DNA adducts (DNA binding products, considered a necessary step in PAH-initiated carcinogenesis, has been widely studied in experimental models and has been documented in human tissues. This review describes immunohistochemistry (IHC studies, which reveal localization of PAH-DNA adducts in human tissues, and semi-quantify PAH-DNA adduct levels using the Automated Cellular Imaging System (ACIS. These studies have shown that PAH-DNA adducts concentrate in: basal and supra-basal epithelium of the esophagus, cervix and vulva; glandular epithelium of the prostate; and cytotrophoblast cells and syncitiotrophoblast knots of the placenta. The IHC photomicrographs reveal the ubiquitous nature of PAH-DNA adduct formation in human tissues as well as PAH-DNA adduct accumulation in specific, vulnerable, cell types. This semi-quantative method for PAH-DNA adduct measurement could potentially see widespread use in molecular epidemiology studies.

  20. Preparation of semisynthetic (+)-tubocurarine chloride.

    Science.gov (United States)

    Naghaway, J; Soine, T O

    1979-05-01

    Semisynthetic (+)-tubocurarine chloride (II) was prepared by monoquaternization of (+)-tubocurine. The method involved treating (+)-tubocurine with a 0.5 M equivalent of hydrochloric acid prior to quaternization with methyl iodide, followed by neutralization and iodide-chloride ion-exchange. Column chromatography and crystallization procedures were utilized for pure semisynthetic II preparation. The neuromuscular junction blocking activities of the semisynthetic and commercial II were determined by the in vivo cat hypoglossal nerve-tongue muscle preparation. No delectable differences among physical constants, spectral data, and neuromuscular junction blocking activities were noted between the commercial product and the semisynthetic II. This result substantiates the chemical and biological data for the well-accepted new formula for II. The unexplained M + n14 mass spectral peaks shown by the curare-type bases are characteristic of the molecular species rather than a result of contaminants.

  1. Complex conformational heterogeneity of the highly flexible O6-benzyl-guanine DNA adduct.

    Science.gov (United States)

    Wilson, Katie A; Wetmore, Stacey D

    2014-07-21

    The conformational preference of the O6-benzyl-guanine (BzG) adduct was computationally examined using nucleoside, nucleotide, and DNA models, which provided critical information about the potential mutagenic consequences and toxicity of the BzG adduct in our cells. Substantial conformational flexibility of the BzG moiety, including rotation of the bulky group with respect to the base and the internal conformation of the bulk moiety, is seen in the nucleoside and nucleotide models. This large conformational flexibility suggests the conformation adopted by BzG is dependent on the local environment of the BzG adduct. Upon incorporation of the adduct into the DNA helix, the BzG conformational flexibility is maintained. The range of BzG conformations adopted in DNA likely arises due to a combination of the long and flexible (-CH2-) linker, the small adduct size, and the lack of discrete interactions between the bulky moiety and G. Because of the conformational flexibility of the adduct, many DNA conformations are observed for BzG adducted DNA, including those not previously reported in the literature, and thus, a modified nomenclature for adducted DNA conformations is presented. Furthermore, the preferred conformation of BzG adducted DNA is greatly dependent on a number of factors, including the pairing nucleotide, the discrete interactions in the helix, and the solvation of the benzyl moiety. These factors in turn lead to a complicated mutagenic and toxic profile that may invoke pairing with natural C, mispairs, or deletion mutations, which is supported by previously reported experimental biochemical studies. Despite this complex mutagenic profile, pairing with C leads to the most stable helical structure, which is the first combined structural and energetic explanation for experimental studies reporting a higher rate of C incorporation than any other nucleobase upon BzG replication.

  2. Oxomemazine hydro­chloride

    OpenAIRE

    Siddegowda, M. S.; Butcher, Ray J.; Mehmet Akkurt; Yathirajan, H.S.; Ramesh, A. R.

    2011-01-01

    In the title compound [systematic name: 3-(5,5-dioxophenothiazin-10-yl)-N,N,2-trimethylpropanaminium chloride], C18H23N2O2S+·Cl−, the dihedral angle between the two outer aromatic rings of the phenothiazine unit is 30.5 (2)°. In the crystal, the components are linked by N—H...Cl and C—H...Cl hydrogen bonds and C—H...π interactions.

  3. Shock compression of polyvinyl chloride

    Science.gov (United States)

    Neogi, Anupam; Mitra, Nilanjan

    2016-04-01

    This study presents shock compression simulation of atactic polyvinyl chloride (PVC) using ab-initio and classical molecular dynamics. The manuscript also identifies the limits of applicability of classical molecular dynamics based shock compression simulation for PVC. The mechanism of bond dissociation under shock loading and its progression is demonstrated in this manuscript using the density functional theory based molecular dynamics simulations. The rate of dissociation of different bonds at different shock velocities is also presented in this manuscript.

  4. Salt, chloride, bleach, and innate host defense.

    Science.gov (United States)

    Wang, Guoshun; Nauseef, William M

    2015-08-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense.

  5. Salt, chloride, bleach, and innate host defense

    Science.gov (United States)

    Wang, Guoshun; Nauseef, William M.

    2015-01-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense. PMID:26048979

  6. Developing chloride resisting concrete using PFA

    Energy Technology Data Exchange (ETDEWEB)

    Dhir, R.K.; El-Mohr, M.A.K.; Dyer, T.D. [Univ. of Dundee (United Kingdom). Dept. of Civil Engineering

    1997-11-01

    PFA concrete mixes were designed to optimize resistance to chloride ingress. Chloride binding capacity, intrinsic permeability and their concomitant influence on the coefficient of chloride diffusion have been investigated. PFA replacements up to 67% and exposure concentrations of 0.1, 0.5, 1.0 and 5.0 mole/liter were used. Chloride binding capacity was found to increase with increasing PFA replacement up to 50% and to then decline. It increased with chloride exposure concentration as well as water/binder ratio. The coefficient of chloride diffusion of concrete samples was found to be dependent on both the intrinsic permeability of the concrete and the ability of its cement matrix to bind chlorides.

  7. Preferential Formation of Benzo[a]pyrene Adducts at Lung Cancer Mutational Hotspots in P53

    Science.gov (United States)

    Denissenko, Mikhail F.; Pao, Annie; Tang, Moon-Shong; Pfeifer, Gerd P.

    1996-10-01

    Cigarette smoke carcinogens such as benzo[a]pyrene are implicated in the development of lung cancer. The distribution of benzo[a]pyrene diol epoxide (BPDE) adducts along exons of the P53 gene in BPDE-treated HeLa cells and bronchial epithelial cells was mapped at nucleotide resolution. Strong and selective adduct formation occurred at guanine positions in codons 157, 248, and 273. These same positions are the major mutational hotspots in human lung cancers. Thus, targeted adduct formation rather than phenotypic selection appears to shape the P53 mutational spectrum in lung cancer. These results provide a direct etiological link between a defined chemical carcinogen and human cancer.

  8. Base-Displaced Intercalated Structure of the N-(2'-Deoxyguanosin-8-yl)-3-aminobenzanthrone DNA Adduct.

    Science.gov (United States)

    Politica, Dustin A; Malik, Chanchal K; Basu, Ashis K; Stone, Michael P

    2015-12-21

    3-Nitrobenzanthrone (3-NBA), an environmental mutagen found in diesel exhaust and a suspected carcinogen, undergoes metabolic reduction followed by reaction with DNA to form aminobenzanthrone (ABA) adducts, with the major alkylation product being N-(2'-deoxyguanosin-8-yl)-3-aminobenzanthrone (C8-dG-ABA). Site-specific synthesis of the C8-dG-ABA adduct in the oligodeoxynucleotide 5'-d(GTGCXTGTTTGT)-3':5'-d(ACAAACACGCAC)-3'; X = C8-dG-ABA adduct, including codons 272-275 of the p53 gene, has allowed for investigation into the structural and thermodynamic properties of this adduct. The conformation of the C8-dG-ABA adduct was determined using NMR spectroscopy and was refined using molecular dynamics (MD) calculations restrained by experimentally determined interproton distance restraints obtained from NOE experiments. The refined structure revealed that the C8-dG-ABA adduct formed a base-displaced intercalated conformation. The adducted guanine was shifted into the syn conformation about the glycosidic bond. The 5'- and 3'-neighboring base pairs remained intact. While this facilitated π-stacking interactions between the ABA moiety and neighboring bases, the thermal melting temperature (Tm) of the adduct-containing duplex showed a decrease of 11 °C as compared to the corresponding unmodified oligodeoxynucleotide duplex. Overall, in this sequence, the base-displaced intercalated conformation of the C8-dG-ABA lesion bears similarity to structures of other arylamine C8-dG adducts. However, in this sequence, the base-displaced intercalated conformation for the C8-dG-ABA adduct differs from the conformation of the N(2)-dG-ABA adduct reported by de los Santos and co-workers, in which it is oriented in the minor groove toward the 5' end of the duplex, with the modified guanine remaining in the anti conformation about the glyosidic torsion angle, and the complementary base remaining within the duplex. The results are discussed in relationship to differences between the C8-d

  9. Therapeutic Application of Natural Medicine Monomers in Cancer Treatment.

    Science.gov (United States)

    Zhong, Chen; Wall, Nathan R; Zu, Yuangang; Sui, Guangchao

    2017-07-14

    Natural medicine monomers (NMMs) isolated from plants have been recognized for their roles in treating different human diseases including cancers. Many NMMs exhibit effective anti-cancer activities and can be used as drugs or adjuvant agents to enhance the efficacy of chemotherapy and radiotherapy with low or tolerable side effects. Some NMMs, such as Paclitaxel and Camptothecin, have been extensively studied for decades and are now used as anti-cancer medicines due to their remarkable curative effects, such as inhibiting cancer cell proliferation and metastasis, and inducing cell death and differentiation. Although therapeutic effects for most NMMs have been appreciated, the underlying mechanisms of their anti-cancer activities remain largely unexplored. In this review, we have grouped NMMs into six categories based on their chemical structures, and summarized current knowledge of molecular mechanisms of anti-cancer activities to provide a theoretical basis for clinical application and new drug development of NMMs. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  10. Computational screening of oxetane monomers for novel hydroxy terminated polyethers.

    Science.gov (United States)

    Sarangapani, Radhakrishnan; Ghule, Vikas D; Sikder, Arun K

    2014-06-01

    Energetic hydroxy terminated polyether prepolymers find paramount importance in search of energetic binders for propellant applications. In the present study, density functional theory (DFT) has been employed to screen the various novel energetic oxetane derivatives, which usually construct the backbone for these energetic polymers. Molecular structures were investigated at the B3LYP/6-31G* level, and isodesmic reactions were designed for calculating the gas phase heats of formation. The condensed phase heats of formation for designed compounds were calculated by the Politzer approach using heats of sublimation. Among the designed oxetane derivatives, T4 and T5 possess condensed phase heat of formation above 210 kJ mol(-1). The crystal packing density of the designed oxetane derivatives varied from 1.2 to 1.6 g/cm(3). The detonation velocities and pressures were evaluated using the Kamlet-Jacobs equations, utilizing the predicted densities and HOFCond. It was found that most of the designed oxetane derivatives have detonation performance comparable to the monomers of benchmark energetic polymers viz., NIMMO, AMMO, and BAMO. The strain energy (SE) for the oxetane derivatives were calculated using homodesmotic reactions, while intramolecular group interactions were predicted through the disproportionation energies. The concept of chemical hardness is used to analyze the susceptibility of designed compounds to reactivity and chemical transformations. The heats of formation, density, and predicted performance imply that the designed molecules are expected to be candidates for polymer synthesis and potential molecules for energetic binders.

  11. Conformational study of neutral histamine monomer and their vibrational spectra

    Science.gov (United States)

    Mukherjee, V.; Yadav, T.

    2016-08-01

    Molecular modeling and potential energy scanning of histamine molecule, which is an important neurotransmitter, with respect to the dihedral angle of methylamine side chain have done which prefer three different conformers of histamine monomer. We have calculated molecular structures and vibrational spectra with IR and Raman intensities of these conformers using Density Functional Theory (DFT) with the exchange functional B3LYP incorporated with the basis set 6-31 ++G(d,p) and Hartree-Fock (HF) with the same basis set. We have also employed normal coordinate analysis (NCA) to scale the theoretical frequencies and to calculate potential energy distributions (PEDs) for the conspicuous assignments. Normal modes assignments of some of the vibrational frequencies of all the three conformers are in good agreement with the earlier reported experimental frequencies of histamine whereas others have modified. The standard deviations between the theoretical and experimental frequencies fall in the region 13-20 cm- 1 for the three conformers. NBO analyses of histamine conformers were also performed. The net charge transfers from ethylamine side chain to the imidazole ring. The intensive interactions between bonding and anti-bonding orbitals are found in imidazole ring. The HOMO-LUMO energy gap is nearly 5.50 eV.

  12. Ligustrazine monomer against cerebral ischemia-reperfusion injury

    Directory of Open Access Journals (Sweden)

    Hai-jun Gao

    2015-01-01

    Full Text Available Ligustrazine (2,3,5,6-tetramethylpyrazine is a major active ingredient of the Szechwan lovage rhizome and is extensively used in treatment of ischemic cerebrovascular disease. The mechanism of action of ligustrazine use against ischemic cerebrovascular diseases remains unclear at present. This study summarizes its protective effect, the optimum time window of administration, and the most effective mode of administration for clinical treatment of cerebral ischemia/reperfusion injury. We examine the effects of ligustrazine on suppressing excitatory amino acid release, promoting migration, differentiation and proliferation of endogenous neural stem cells. We also looked at its effects on angiogenesis and how it inhibits thrombosis, the inflammatory response, and apoptosis after cerebral ischemia. We consider that ligustrazine gives noticeable protection from cerebral ischemia/reperfusion injury. The time window of ligustrazine administration is limited. The protective effect and time window of a series of derivative monomers of ligustrazine such as 2-[(1,1-dimethylethyloxidoimino]methyl]-3,5,6-trimethylpyrazine, CXC137 and CXC195 after cerebral ischemia were better than ligustrazine.

  13. Rheological study of polypropylene irradiated with polyfunctional monomers

    Science.gov (United States)

    Otaguro, H.; Rogero, S. O.; Yoshiga, A.; Lima, L. F. C. P.; Parra, D. F.; Artel, B. W. H.; Lugão, A. B.

    2007-12-01

    The aim of this paper is to investigate the rheological properties of polypropylene (PP) modified by ionization radiation (gamma rays) in the presence of two different monomers. The samples were mixed in a twin-screw extruder with ethylene glycol dimethacrylate (EGDMA) or trimethylolpropane trimethacrylate (TMPTMA) with concentration in the range of 0.5-5.0 mmol. After that, they were irradiated with 20 kGy dose of gamma radiation. The structural modification of polypropylene was analyzed in the melt state by measuring melt flow rate (MFR), η* (complex viscosity) and G' (storage modulus) in the angular frequency range of 10 -1 to 3 × 10 2 rad s -1. From the oscillatory rheology data, one could obtain the values of η0 (zero shear viscosity) that would be related to the molar mass. All results were discussed with respect to the crosslinking and degradation process that occur in the post-reactor treatment to produce controlled rheology polypropylene. The resulting polymeric materials were submitted the cytotoxicity in vitro test by neutral red uptake methodology with NCTC L 929 cell line from American Type Culture Collection bank. All modified PP samples presented no cytotoxicity.

  14. Blood compatibility of polyurethane surface grafted copolymerization with sulfobetaine monomer.

    Science.gov (United States)

    Jiang, Yuan; Rongbing, Bian; Ling, Tong; Jian, Shen; Sicong, Lin

    2004-07-01

    Surface modification is an effective way to improve the hemocompatibility and remain bulk properties of biomaterials. Recently, polymer tailed with zwitterions was found having good blood compatibility. In this study, the grafting copolymerization of sulfobetaine onto polyurethane surface was obtained through two steps. In the first step, polyurethane film coupled with vinyl groups was obtained through the reaction between the carboxyl group of acrylic acid (AA) and the NH-urethane group of polyurethane by dicyclohexylcarbodiimide (DCC). In the second step, sulfobetaine was grafted copolymerization on the surface using AIBN as an initiator. The reaction process was monitored with ATR-IR spectra and X-ray photoelectron spectroscopy (XPS) spectra. The wettability of films was investigated by water contact angle measurement. The blood compatibility of the grafted films was evaluated by platelet adhesion in platelet rich plasma (PRP) and protein absorption in bovine fibrinogen (BFG). Low platelet adhesion was observed on the grafted films incubated in PRP for 1 and 3 h, respectively. The protein absorption was reduced on the grafted films after incubated in bovine fibrinogen for 2 h. All of these results revealed that the improved blood compatibility was obtained by grafting copolymerization with zwitterionic monomer of sulfobetaine onto polyurethane film. In addition, introducing vinyl groups onto surface through DCC and AA is a novel method to functionalize polyurethane for further modification.

  15. The Theaflavin Monomers Inhibit the Cancer Cells Growth in Vitro

    Institute of Scientific and Technical Information of China (English)

    You-Ying TU; An-Bin TANG; Naoharu WATANABE

    2004-01-01

    The inhibition effects of tea theaflavins complex (TFs), theaflavin-3-3 '-digallate (TFDG),theaflavin-3'-gallate (TF2B), and an unidentified compound (UC) on the growth of human liver cancer BEL-7402 cells, gastric cancer MKN-28 cells and acute promyelocytic leukemia LH-60 cells were investigated.TFs was obtained through the catalysis of catechins with immobilized polyphenols oxidase. TFDG, TF2B and UC were isolated from TFs with high speed countercurrent chromatography (HSCCC). The results showed that TF2B significantly inhibited the growth of all three kinds of cancer cells, TFs, TFDG and UC had some effect on BEL-7402 and MKN-28, but little activity on LH-60. The inhibition effects of TF2B, TFDG, and UC on BEL-7402 and MKN-28 were stronger than TFs. The relationship coefficients between monomer concentration and its inhibition rate against MKN-28 and BEL-7402 were 0.87 and 0.98 for TF2B, 0.96 and 0.98 for UC, respectively. The IC50 values ofTFs, TF2B, and TFDG were 0.18, 0.11, and 0.16 mM on BEL-7402 cells, and 1.11, 0.22, and 0.25 mM on MKN-28 cells respectively.

  16. Analysis of hemoglobin adducts from acrylamide, glycidamide, and ethylene oxide in paired mother/cord blood samples from Denmark

    DEFF Research Database (Denmark)

    von Stedingk, Hans; Vikström, Anna C; Rydberg, Per

    2011-01-01

    for analysis of Hb adducts by liquid chromatography-mass spectrometry, the adduct FIRE procedure, was applied to measurements of adducts from these compounds in maternal blood samples (n = 87) and umbilical cord blood samples (n = 219). The adduct levels from the three compounds, acrylamide, glycidamide......, and ethylene oxide, were increased in tobacco smokers. Highly significant correlations were found between cord and maternal blood with regard to measured adduct levels of the three compounds. The mean cord/maternal hemoglobin adduct level ratios were 0.48 (range 0.27-0.86) for acrylamide, 0.38 (range 0.......20-0.73) for glycidamide, and 0.43 (range 0.17-1.34) for ethylene oxide. In vitro studies with acrylamide and glycidamide showed a lower (0.38-0.48) rate of adduct formation with Hb in cord blood than with Hb in maternal blood, which is compatible with the structural differences in fetal and adult Hb. Together...

  17. A comment on water’s structure using monomer fraction data and theories

    DEFF Research Database (Denmark)

    Liang, Xiaodong; Maribo-Mogensen, Bjørn; Tsivintzelis, Ioannis;

    2016-01-01

    Monomer fraction data for water (and other compounds) can provide useful information about their structure and can be used in “advanced” equations of state, which account explicitly for association phenomena. Recent findings about the performance of association theories in representing the monome...

  18. Synthesis and ATRP of novel fluorinated aromatic monomer with pendant sulfonate group

    DEFF Research Database (Denmark)

    Dimitrov, Ivaylo; Jankova Atanasova, Katja; Hvilsted, Søren

    2013-01-01

    Novel, fluorinated monomer with pendant sulfonate group was synthesized utilizing a two-step derivatization of 2,3,4,5,6-pentafluorostyrene (FS). The first step was a nucleophilic substitution of the fluorine atom in para position by hydroxyl group followed by sulfopropylation. The monomer was po...

  19. Monomers, polymers and articles containing the same from sugar derived compounds

    Science.gov (United States)

    Gallagher, James; Reineke, Theresa; Hillmyer, Marc A.

    2016-11-29

    Disclosed herein are monomers formed by reacting a sugar derived compound(s) comprising a lactone and two hydroxyls with a compound(s) comprising an isocyanate and an acrylate or methacrylate. Polymers formed from such monomers, and articles formed from the polymers are also disclosed.

  20. Random sampling for the monomer-dimer model on a lattice

    NARCIS (Netherlands)

    J. van den Berg (Rob); R.M. Brouwer (Rachel)

    1999-01-01

    textabstractIn the monomer-dimer model on a graph, each matching (collection of non-overlapping edges) ${M$ has a probability proportional to $lambda^{|M|$, where $lambda > 0$ is the model parameter, and $|M|$ denotes the number of edges in $M$. An approximate random sample from the monomer-dimer

  1. Monomers, polymers and articles containing the same from sugar derived compounds

    Energy Technology Data Exchange (ETDEWEB)

    Gallagher, James; Reineke, Theresa; Hillmyer, Marc A.

    2016-11-29

    Disclosed herein are monomers formed by reacting a sugar derived compound(s) comprising a lactone and two hydroxyls with a compound(s) comprising an isocyanate and an acrylate or methacrylate. Polymers formed from such monomers, and articles formed from the polymers are also disclosed.

  2. A diethyl phosphonate containing oxazoline: Synthesis and characterization of monomer and homopolymer

    Energy Technology Data Exchange (ETDEWEB)

    Hermes, R.E.; Thompson, R.D.; Valdez, L.S.

    1995-05-01

    A diethyl phosphonate oxazoline monomer and its polymer have been synthesized. The monomer appears to polymerize via a ring-opening mechanism giving the expected polyethyleneimine backbone with pendant carbonyl groups. Two distinct molecular weights were produced during polymerization suggesting two mechanisms of chain growth. Studies are underway to elucidate the reasons for this. This polymer has potential as a metal-chelating agent.

  3. Identification and characterization of the major DNA adduct formed chemically and in vitro from the environmental genotoxin 3-nitrofluoranthene.

    Science.gov (United States)

    Dietrich, A M; Guenat, C R; Tomer, K B; Ball, L M

    1988-11-01

    The genotoxic environmental pollutant 3-nitrofluoranthene (3-NFA) was reduced chemically and allowed to react with calf thymus DNA, yielding one major adduct which was determined to be N-(deoxyguanosin-8-yl)-3-amino-fluoranthene based on Fast Atom Bombardment Mass Spectrometry (FAB-MS), proton nuclear magnetic resonance, ultraviolet-visible wavelength light spectroscopy (UV-VIS), and fluorescence data. Extensive characterization of the isolated adduct by tandem mass spectrometry (MS/MS) was necessary to demonstrate definitively that the adduct isolated was the dG:C8 adduct, and not the isomeric dG:N2 adduct. The extent of modification of the initial calf thymus DNA by chemically reduced 3-NFA was 0.12% (1.2 adducts/10(3) nucleosides), which was sufficient to allow several hundred micrograms of the adduct to be isolated and purified. The chemically synthesized adduct was utilized as a reference standard for comparison to the major adduct isolated from xanthine-oxidase-catalyzed reduction of 3-NFA in vitro. The yield from the in vitro biological system was 2.4 adducts/10(5) nucleosides; the adduct isolated possessed the same mass spectrometric, UV-VIS, and fluorescence characteristics as the purified standard, and co-eluted with the standard on HPLC. No evidence for other adducts was found, either in vitro or in the chemical synthesis, based on FAB-MS examination of whole extracts of the reaction mixture for the presence of ions related to other possible adducts. Therefore, if minor adducts were present they were formed in substantially lesser amounts than N-(deoxyguanosin-8-yl)-3-aminofluoranthene.

  4. Preparation of hydrophilic vinyl chloride copolymer hollow fiber membranes with antifouling properties

    Science.gov (United States)

    Rajabzadeh, Saeid; Sano, Rie; Ishigami, Toru; Kakihana, Yuriko; Ohmukai, Yoshikage; Matsuyama, Hideto

    2015-01-01

    Hydrophilic vinyl chloride copolymer hollow fiber membranes with antifouling properties were prepared from brominated vinyl chloride-hydroxyethyl methacrylate copolymer (poly(VC-co-HEMA-Br)). The base membrane was grafted with two different zwitterionic monomers, (2-methacryloyloxyethylphosphorylcholine) (MPC) and [2-(methacryloyloxy) ethyl] dimethyl (3-sulfopropyl) ammonium hydroxide) (MEDSAH), and poly(ethylene glycol) methyl ether methacrylate (PEGMA). The effect of the grafting on the base membrane hydrophilicity and antifouling properties was investigated. For comparison of the results, the pure water permeabilities and pore sizes at the outer surfaces of the grafted hollow fiber membranes were controlled to be similar. A poly(VC-co-HEMA-Br) hollow fiber membrane with similar pure water permeability and pore size was also prepared as a control membrane. A BSA solution was used as a model fouling solution for evaluation of the antifouling properties. Grafting with zwitterionic monomers and PEGMA improved the antifouling properties compared with the control membrane. The PEGMA grafted membrane showed the best antifouling properties among the grafted membranes

  5. Preparation and antibacterial activity of quaternary ammonium salt monomers%牙科季铵盐类单体的制备及其抗菌作用的研究

    Institute of Scientific and Technical Information of China (English)

    肖玉鸿; 陈吉华; 方明; 邢晓东; 李芳; 柴治国

    2008-01-01

    目的 制备3种季铵盐类单体,比较其对口腔常见细菌的作用,为牙科抗菌材料的研制提供基础依据.方法 制备3种季铵盐类单体[甲基丙烯酰氧乙基-苄基-二甲基氯化铵(methacryloxylethyl benzyl dimethyl ammonium chloride,DMAE-BC)、甲基丙烯酰氧乙基-间氯苄基-二甲基氯化铵(methacryloxylethyl m-chloro benzyl dimethyl ammonium chloride,DMAE-m-CBC)、甲基丙烯酰氧乙基-正十六烷基-二甲基氯化铵(methacryloxylethyl cetyl dimethyl ammonium chloride,DMAE-CB)],采用液体稀释法比较其对变形链球菌、血链球菌、牙龈卟啉单胞菌、产黑普氏菌的抗菌作用.结果 3种季铵盐类单体中DMAE-CB的抗菌效果最强,对4种口腔细菌的最低抑菌浓度值为1.2至4.8 mg/L,而另外两种单体对4种细菌的最低抑菌浓度值为1562.5至3125.0 ms/L.结论 3种季铵盐类单体对变形链球菌、血链球菌、牙龈卟啉单胞菌、产黑普氏菌均有不同程度的抗菌作用,其中DMAE-CB的抗菌活性最强.%Objective To prepare three quaternary ammonium salt (QAS) monomers, and to compare their antibacterial activities against four oral bacterial strains. Methods Three antibacterial monomers [ methacryloxylethyl benzyl dimethyl ammonium chloride(DMAE-BC) , methacryloxylethyl m-chloro benzyl dimethyl ammonium chloride( DMAE-m-CBC ), methacryloxylethyl cetyl dimethyl ammonium chloride (DMAE-CB) ] were synthesized according to the general structure of target monomers. Their antibacterial effects were investigated using the broth dilution test on Gram-positive and Gram-negative bacterial strains ( Streptococcus mutans ,Streptococcus sanguis, Porphyromonas gingivalis, Prevotella melaninogenica). Results Three different monomers were successfully obtained. All the tested bacterial strains were susceptible to the three monomers, among which DMAE-CB exhibited the lowest minimal inhibitory concentrations (MIC) ranging from 1.2 to 4. 8 mg/L Conclusions All these three

  6. Mechanism of alternating copolymerization of methyl methacrylate with styrene in the presence of diethylaluminum chloride

    Energy Technology Data Exchange (ETDEWEB)

    Zubov, V.P.; Lachinov, M.B.; Ignatova, E.V.; Georgiev, G.S.; Golubev, V.B.; Kabanov, V.A.

    1982-03-01

    A kinetic study of the propagation mechanism of the alternating copolymerization of styrene (St) with methyl methacrylate (MMA) in the presence of a complexing agent (diethylaluminum chloride, DEAC) in bulk and in tetrachloroethylene solutions at a molar ratio DEAC/MMA = 0.5 has been carried out. It has been shown that the copolymerization is a chain radical process characterized by a short active-center lifetime, bimolecular termination, and high rate of chain transfer to the complexed MMA. A kinetic scheme has been proposed for the propagation mechanism of alternating copolymerization in the presence of a complexing agent not requiring independent measurements of the equilibrium constant of complexation. It has been found that spontaneous and uv-initiated copolymerizations in the system have different mechanisms of initiation and a common mechanism of propagation. The propagation proceeds by addition of single monomers as well as donor-acceptor complexes of the comonomers to the propagation radicals, with the first mechanism being predominant. Inclusion of the monomers in the complex leads to an increase of the St reactivity and to a decrease of the MMA reactivity in propagation to the corresponding macroradicals in comparison with the reactivity of the free monomers. A number of kinetic and statistical parameters of the propagation reaction have been calculated.

  7. Isolation and Characterization of 1,3-Bis(vinylbenzylthymine: Copolymerization with Vinylbenzyl Thymine Ammonium Chloride

    Directory of Open Access Journals (Sweden)

    Ngoc Chau H. Vy

    2017-01-01

    Full Text Available A novel bioinspired molecule, 1,3-bis(vinylbenzylthymine (bisVBT, was isolated as a by-product during the synthesis of 1-(4-vinylbenzylthymine (VBT and analyzed with various techniques: NMR, IR, and Single-Crystal X-ray Diffraction. In addition to embodying all the desired characteristics of VBT (i.e., having the ability to undergo a 2π+2π photodimerization reaction upon UV irradiation, a derivatization site, hydrogen bonding sites, and aromatic stacking ability the bisVBT monomer has the added benefit of having two vinyl groups for cross-polymerization. Copolymerizing the bisVBT monomer with the charged monomer vinylbenzyl triethylammonium (VBA chloride, different copolymers/terpolymers/cross-linked network were obtained, as it was shown by the absence of the vinyl resonance in the NMR spectra. Thermal Gravimetric Analysis (TGA and Differential Scanning Calorimetry (DSC showed an indication of materials with low degree of cross-linking. A Gel Permeation Chromatography (GPC method was improved to better characterize the molecular weight distributions of the cationic structures. Preliminary qualitative cross-linking studies were performed on bisVBT-VBA copolymers, and a comparison with VBT-VBA copolymers is presented.

  8. Hydrolysis of cupric chloride in aqueous ammoniacal ammonium chloride solutions

    Directory of Open Access Journals (Sweden)

    Limpo, J. L.

    1995-06-01

    Full Text Available Cupric solubility in the CuCl2-NH4Cl-NH3-H2O system for chloride concentrations lower than 4 molal in the temperature range 25-60 °C was studied. The experimental results show that for chloride concentration between 3.0 and 1.0 molal the cupric solubility is determined by the solubility of the cupric hydroxychloride Cu(OH1.5Cl0.5. For a chloride concentration value of 4.0 molal, there are two cupric compounds, the hydroxychloride Cu(OH1.5Cl0.5 or the diammine chloride Cu(NH32Cl2, on which the solubility of Cu(II depends, according to the temperature and the value of the ratio [NH3]Total/[Cu]Total.

    Se estudia la solubilidad del Cu(II en el sistema CuCl2-NH4Cl-NH3-H2O para concentraciones de cloruro inferiores a 4 molal en el intervalo de temperaturas 25-60 °C. Los resultados experimentales muestran que, para concentraciones de cloruros comprendidas entre 3,0 y 1,0 molal, la solubilidad cúprica viene determinada por la solubilidad del hidroxicloruro cúprico, Cu(OH1.5Cl0.5. Para concentraciones de cloruro 4,0 molal, existen dos compuestos cúpricos, el hidroxicloruro, Cu(OH1.5Cl0.5 o el cloruro de diamina, Cu(NH32Cl2, de los que, de acuerdo con la temperatura y con el valor de la relación [NH3]Total/[Cu]Total depende la solubilidad del Cu(II.

  9. EFFECT OF SEQUENCE STRUCTURE ON THE THERMOTROPIC LIQUID CRYSTALLINE PROPERTIES OF POLYESTERAMIDES BASED ON DIMETHYLBENZIDINE, BISPHENOL-A AND p-TEREPHTHALYL CHLORIDE

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    A series of thermotropic liquid crystalline polyesteramides with different sequence structure based on dimethylbenzidine (DMBD), bisphenol-A(BPA) and pterephthalyl chloride (TPC) was synthesized by changing the feeding order of monomers in low temperature solution polycondensation system. By means of NMR and a computer program the sequence structure parameters were measured. The effect of sequence structure on liquid crystalline phase transition temperature of PEAs obtained was investigated.

  10. Organic-Inorganic Thermoelectrics from Single Monomers to Polymer Devices

    Science.gov (United States)

    Chang, William Bee

    Waste heat recovery from the human body provides opportunities to power electronics with a source that is cheap and readily available. Thermoelectrics utilize the Seebeck effect to recover useable electrical energy from this waste heat, but are limited due to material parameters being inversely coupled in the bulk. We investigate the role of novel physics at interfaces in order to develop new fundamental understanding of thermoelectrics. The goal is to discover systems where the Seebeck coefficient and the electrical conductivity are not inversely correlated. We investigate thermoelectric transport in organic-organic systems such as scanning tunneling microscope molecular break junctions on the nanoscale, gold nanocrystal arrays on the mesoscale and polymeric ion and mixed conductors at the macroscale. The STM molecular junctions studied in this work can provide design rules to positively couple the Seebeck coefficient and the electrical conductance. Since STM molecular junctions are one-dimensional systems, by minimizing the gap between the molecular orbital energy level and the electrode Fermi energy, the power factor S2? can be optimized. I built a toolbox of chemical structures by first understanding the role of the interface coupling to alkylthiol binding groups of thiophene-based molecules. With this understanding, I designed small molecules based on the monomer unit of donor-acceptor polymers and other conductive polymers. Molecules with very high HOMO levels or low LUMO levels were studied, and the corresponding energy levels were examined using spectroscopic techniques. I then present our work on scaling these molecular junctions to the macroscale using ligand-exchanged gold nanocrystal arrays. Beginning with a model system of alkanethiols and alkanedithiols, I show that the electrical conductivity scales with ligand length exactly as observed in single molecule junctions, and the Seebeck coefficient follows a similar trend. By showing that gold

  11. Investigation of protein-styrene oxide adducts as a molecularbiomarker of human exposed to styrene

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Hemoglobin-styrene oxide adducts in blood has been studied as a molecular biomarker of worker exposed to styrene.Determination of protein-styrene oxide adducts in different biological samples with modified Raney-Ni procedure is described in this paper. The following biological samples have been investigated: fresh rat blood reacted with styrene oxide in vitro; rat blood reacted with styrene or styrene oxide in vivo; vein blood from workers exposed to styrene in two factories. The data showed that there was a good linear dose-response relationship between reacting dose of styrene oxide or styrene and amount of protein-styrene oxide adducts in both in vitro and in vivo experiments. For human samples, a dose-response relationship between protein adducts and styrene exposure can be found in glass fiber factory, but not in piano manufacture plant.

  12. Recent progress in quantitative analysis of DNA adducts of nephrotoxin aristolochic acid

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Aristolochic acid (AA), a mixture of structure-related nitrophenanthrene carboxylic acid derivatives derived from Aristolochia spp, is associated with nephrotoxin and carcinogen. AA-DNA adducts induced by reductive metabolic activation of AA were detected in tissues of animals and in patients exposed to AA. The DNA adducts were generally used as biomarkers in toxicological study of AA. In this short review, quantitative analysis of AA-DNA adducts in various in vitro and in vivo systems by using 32P-postlabelling assay, HPLC-UV, HPLC-radiation monitor, HPLC-FLD, HPLC-ESI/MS and UPLC-MS/MS methods is discussed. The distribution of AA-DNA adducts in various tissues is also summarized.

  13. Glottal configuration, acoustic, and aerodynamic changes induced by variation in suture direction in arytenoid adduction procedures.

    Science.gov (United States)

    Inagi, Katsuhide; Connor, Nadine P; Suzuki, Tatsutoshi; Ford, Charles N; Bless, Diane M; Nakajima, Masami

    2002-10-01

    Arytenoid adduction is a phonosurgical procedure in which the arytenoid cartilages are approximated to reduce posterior glottal gap size and improve voice. Voice outcomes following arytenoid adduction are not always optimal. The goal of this study was to systematically vary suture direction and force of pull on the arytenoid cartilages in a human excised laryngeal model to determine the optimal combination of factors for reducing glottal gap and improving voice. Several factors demonstrated significant effects. Changes in suture direction and force of pull affected glottal configuration in both the horizontal and vertical planes. Increased force of pull on the muscular process resulted in increased adduction of the vocal process for all suture directions. Changes in suture direction and force of pull also affected acoustic and aerodynamic measures of induced voice. Therefore, voice outcomes can be optimized with arytenoid adduction if the vocal fold plane is accurately adjusted.

  14. DNA adducts and cancer risk in prospective studies: a pooled analysis and a meta-analysis

    DEFF Research Database (Denmark)

    Veglia, Fabrizio; Loft, Steffen; Matullo, Giuseppe;

    2008-01-01

    Bulky DNA adducts are biomarkers of exposure to aromatic compounds and of the ability of the individual to metabolically activate carcinogens and to repair DNA damage. Their ability to predict cancer onset is uncertain. We have performed a pooled analysis of three prospective studies on cancer risk...... in which bulky DNA adducts have been measured in blood samples collected from healthy subjects (N = 1947; average follow-up 51-137 months). In addition, we have performed a meta-analysis by identifying all articles on the same subject published up to the end of 2006, including case-control studies....... In the pooled analysis, a weakly statistically significant increase in the risk of lung cancer was apparent (14% per unit standard deviation change in adduct levels, 95% confidence interval 1-28%; using the weighted mean difference method, 0.15 SD, units higher adducts in cases than in controls...

  15. Bulky DNA adducts in white blood cells: a pooled analysis of 3,600 subjects

    DEFF Research Database (Denmark)

    Ricceri, Fulvio; Godschalk, Roger W; Peluso, Marco;

    2010-01-01

    Bulky DNA adducts are markers of exposure to genotoxic aromatic compounds, which reflect the ability of an individual to metabolically activate carcinogens and to repair DNA damage. Polycyclic aromatic hydrocarbons (PAHs) represent a major class of carcinogens that are capable of forming such add......Bulky DNA adducts are markers of exposure to genotoxic aromatic compounds, which reflect the ability of an individual to metabolically activate carcinogens and to repair DNA damage. Polycyclic aromatic hydrocarbons (PAHs) represent a major class of carcinogens that are capable of forming...... such adducts. Factors that have been reported to be related to DNA adduct levels include smoking, diet, body mass index (BMI), genetic polymorphisms, the season of collection of biologic material, and air pollutants....

  16. Lifetimes and stabilities of familiar explosive molecular adduct complexes during ion mobility measurements.

    Science.gov (United States)

    McKenzie-Coe, Alan; DeBord, John Daniel; Ridgeway, Mark; Park, Melvin; Eiceman, Gary; Fernandez-Lima, Francisco

    2015-08-21

    Trapped ion mobility spectrometry coupled to mass spectrometry (TIMS-MS) was utilized for the separation and identification of familiar explosives in complex mixtures. For the first time, molecular adduct complex lifetimes, relative stability, binding energies and candidate structures are reported for familiar explosives. Experimental and theoretical results showed that the adduct size and reactivity, complex binding energy and the explosive structure tailor the stability of the molecular adduct complex. The flexibility of TIMS to adapt the mobility separation as a function of the molecular adduct complex stability (i.e., short or long IMS experiments/low or high IMS resolution) permits targeted measurements of explosives in complex mixtures with high confidence levels.

  17. NEW THIO S2- ADDUCTS WITH ANTIMONY (III AND V HALIDE: SYNTHESIS AND INFRARED STUDY

    Directory of Open Access Journals (Sweden)

    HASSAN ALLOUCH

    2013-12-01

    Full Text Available Five new S2- adducts with SbIII and SbV halides have been synthesized and studied by infrared. Discrete structures have been suggested, the environment around the antimony being tetrahedral, trigonal bipyramidal or octahedral.

  18. Nanolayering of phosphoric acid ester monomer on enamel and dentin.

    Science.gov (United States)

    Yoshihara, Kumiko; Yoshida, Yasuhiro; Hayakawa, Satoshi; Nagaoka, Noriyuki; Irie, Masao; Ogawa, Tatsuyuki; Van Landuyt, Kirsten L; Osaka, Akiyoshi; Suzuki, Kazuomi; Minagi, Shogo; Van Meerbeek, Bart

    2011-08-01

    Following the "adhesion-decalcification" concept, specific functional monomers possess the capacity to primary chemically interact with hydroxyapatite (HAp). Such ionic bonding with synthetic HAp has been demonstrated for 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP), manifest as self-assembled "nanolayering". In continuation of that basic research this study aimed to explore whether nanolayering also occurs on enamel and dentin when a 10-MDP primer is applied following a common clinical application protocol. Therefore, the interaction of an experimental 10-MDP primer and a control, commercially available, 10-MDP-based primer (Clearfil SE Bond primer (C-SE), Kuraray) with enamel and dentin was characterized by X-ray diffraction (XRD), complemented with transmission electron microscopy interfacial ultrastructural data upon their reaction with enamel and dentin. In addition, XRD was used to study the effect of the concentration of 10-MDP on nanolayering on dentin. Finally, the stability of the nanolayers was determined by measuring the bond strength to enamel and dentin when a photoinitiator was added to the experimental primer or when interfacial polymerization depended solely on the photoinitiator supplied with the subsequently applied adhesive resin. XRD confirmed nanolayering on enamel and dentin, which was significantly greater on dentin than on enamel, and also when the surface was actively rubbed with the primer. Nanolayering was also proportional to the concentration of 10-MDP in the primer. Finally, the experimental primer needed the photoinitiator to obtain a tensile bond strength to dentin comparable with that of the control C-SE primer (which also contains a photoinitiator), but not when bonded to enamel. It is concluded that self-assembled nanolayering occurs on enamel and dentin, even when following a clinically used application protocol. The lower bonding effectiveness of mild self-etch adhesives to enamel should be ascribed in part to a lower

  19. Vinyl acetate monomer (VAM) genotoxicity profile: relevance for carcinogenicity.

    Science.gov (United States)

    Albertini, Richard J

    2013-09-01

    Vinyl acetate monomer (VAM) is a site-of-contact carcinogen in rodents. It is also DNA reactive and mutagenic, but only after its carboxylesterase mediated conversion to acetaldehyde (AA), a metabolic reaction that also produces acetic acid and protons. As VAM's mutagenic metabolite, AA is normally produced endogenously; detoxification by aldehyde dehydrogenase (ALDH) is required to maintain intra-cellular AA homeostasis. This review examines VAM's overall genotoxicity, which is due to and limited by AA, and the processes leading to mutation induction. VAM and AA have both been universally negative in mutation studies in bacteria but both have tested positive in several in vitro studies in higher organisms that usually employed high concentrations of test agents. Recently however, in vitro studies evaluating submillimolar concentrations of VAM or AA have shown threshold dose-responses for mutagenicity in human cultured cells. Neither VAM nor AA induced systemic mutagenicity in in vivo studies in metabolically competent mice when tested at non-lethal doses while treatments of animals deficient in aldehyde dehydrogenase (Aldh in animals) did induce both gene and chromosome level mutations. The results of several studies have reinforced the critical role for aldehyde dehydrogenase 2 (ALDH2 in humans) in limiting AA's (and therefore VAM's) mutagenicity. The overall aim of this review of VAM's mutagenic potential through its AA metabolite is to propose a mode of action (MOA) for VAM's site-of-contact carcinogenesis that incorporates the overall process of mutation induction that includes both background mutations due to endogenous AA and those resulting from exogenous exposures.

  20. DNA adducts in human tissues:biomarkers of exposure to carcinogens in tobacco smoke

    OpenAIRE

    Phillips, D.H.

    1996-01-01

    Tobacco smoking causes millions of cancer deaths annually. Tobacco smoke is a complex mixture of thousands of chemicals including many known animal carcinogens. Because many carcinogens from DNA adducts in target animal or human tissues, the detection of the formation of adducts using such methods as postlabeling, immunoassay, fluorescence spectroscopy, and mass spectrometry is a means of monitoring human exposure to tobacco carcinogens. Smokers are at increased risk of cancer in many organs,...

  1. Effect of Laterally Wedged Insoles on the External Knee Adduction Moment across Different Reference Frames.

    Directory of Open Access Journals (Sweden)

    Satoshi Yamaguchi

    Full Text Available Biomechanical effects of laterally wedged insoles are assessed by reduction in the knee adduction moment. However, the degree of reduction may vary depending on the reference frame with which it is calculated. The purpose of this study was to clarify the effect of reference frame on the reduction in the knee adduction moment by laterally wedged insoles.Twenty-nine healthy participants performed gait trials with a laterally wedged insole and with a flat insole as a control. The knee adduction moment, including the first and second peaks and the angular impulse, were calculated using four different reference frames: the femoral frame, tibial frame, laboratory frame and the Joint Coordinate System.There were significant effects of reference frame on the knee adduction moment first and second peaks (P < 0.001 for both variables, while the effect was not significant for the angular impulse (P = 0.84. No significant interaction between the gait condition and reference frame was found in either of the knee adduction moment variables (P = 0.99 for all variables, indicating that the effects of laterally wedged insole on the knee adduction moments were similar across the four reference frames. On the other hand, the average percent changes ranged from 9% to 16% for the first peak, from 16% to 18% for the second peak and from 17% to 21% for the angular impulse when using the different reference frames.The effects of laterally wedged insole on the reduction in the knee adduction moment were similar across the reference frames. On the other hand, Researchers need to recognize that when the percent change was used as the parameter of the efficacy of laterally wedged insole, the choice of reference frame may influence the interpretation of how laterally wedged insoles affect the knee adduction moment.

  2. Tamoxifen-DNA adduct formation in monkey and human reproductive organs.

    Science.gov (United States)

    Hernandez-Ramon, Elena E; Sandoval, Nicole A; John, Kaarthik; Cline, J Mark; Wood, Charles E; Woodward, Ruth A; Poirier, Miriam C

    2014-05-01

    The estrogen analog tamoxifen (TAM), used for adjuvant therapy of breast cancer, induces endometrial and uterine tumors in breast cancer patients. Proliferation stimulus of the uterine endometrium is likely involved in tumor induction, but genotoxicity may also play a role. Formation of TAM-DNA adducts in human tissues has been reported but remains controversial. To address this issue, we examined TAM-DNA adducts in uteri from two species of monkeys, Erythrocebus patas (patas) and Macaca fascicularis (macaque), and in human endometrium and myometrium. Monkeys were given 3-4 months of chronic TAM dosing scaled to be equivalent to the daily human dose. In the uteri, livers and brains from the patas (n = 3), and endometrium from the macaques (n = 4), TAM-DNA adducts were measurable by TAM-DNA chemiluminescence immunoassay. Average TAM-DNA adduct values for the patas uteri (23 adducts/10(8) nucleotides) were similar to those found in endometrium of the macaques (19 adducts/10(8) nucleotides). Endometrium of macaques exposed to both TAM and low-dose estradiol (n = 5) averaged 34 adducts/10(8) nucleotides. To examine TAM-DNA persistence in the patas, females (n = 3) were exposed to TAM for 3 months and to no drug for an additional month, resulting in low or non-detectable TAM-DNA in livers and uteri. Human endometrial and myometrial samples from women receiving (n = 8) and not receiving (n = 8) TAM therapy were also evaluated. Women receiving TAM therapy averaged 10.3 TAM-DNA adducts/10(8) nucleotides, whereas unexposed women showed no detectable TAM-DNA. The data indicate that genotoxicity, in addition to estrogen agonist effects, may contribute to TAM-induced human endometrial cancer.

  3. Translesion synthesis past acrolein-derived DNA adducts by human mitochondrial DNA polymerase γ.

    Science.gov (United States)

    Kasiviswanathan, Rajesh; Minko, Irina G; Lloyd, R Stephen; Copeland, William C

    2013-05-17

    Acrolein, a mutagenic aldehyde, is produced endogenously by lipid peroxidation and exogenously by combustion of organic materials, including tobacco products. Acrolein reacts with DNA bases forming exocyclic DNA adducts, such as γ-hydroxy-1,N(2)-propano-2'-deoxyguanosine (γ-HOPdG) and γ-hydroxy-1,N(6)-propano-2'-deoxyadenosine (γ-HOPdA). The bulky γ-HOPdG adduct blocks DNA synthesis by replicative polymerases but can be bypassed by translesion synthesis polymerases in the nucleus. Although acrolein-induced adducts are likely to be formed and persist in mitochondrial DNA, animal cell mitochondria lack specialized translesion DNA synthesis polymerases to tolerate these lesions. Thus, it is important to understand how pol γ, the sole mitochondrial DNA polymerase in human cells, acts on acrolein-adducted DNA. To address this question, we investigated the ability of pol γ to bypass the minor groove γ-HOPdG and major groove γ-HOPdA adducts using single nucleotide incorporation and primer extension analyses. The efficiency of pol γ-catalyzed bypass of γ-HOPdG was low, and surprisingly, pol γ preferred to incorporate purine nucleotides opposite the adduct. Pol γ also exhibited ∼2-fold lower rates of excision of the misincorporated purine nucleotides opposite γ-HOPdG compared with the corresponding nucleotides opposite dG. Extension of primers from the termini opposite γ-HOPdG was accomplished only following error-prone purine nucleotide incorporation. However, pol γ preferentially incorporated dT opposite the γ-HOPdA adduct and efficiently extended primers from the correctly paired terminus, indicating that γ-HOPdA is probably nonmutagenic. In summary, our data suggest that acrolein-induced exocyclic DNA lesions can be bypassed by mitochondrial DNA polymerase but, in the case of the minor groove γ-HOPdG adduct, at the cost of unprecedented high mutation rates.

  4. Structural Elucidation of a Carnosine-Acrolein Adduct and its Quantification in Human Urine Samples.

    Science.gov (United States)

    Bispo, Vanderson S; de Arruda Campos, Ivan P; Di Mascio, Paolo; Medeiros, Marisa H G

    2016-01-19

    Aldehydes accumulate in inflammation, during myocardial infarction and have been associated with pain symptoms. One pathway of aldehyde detoxification is the conjugation with carnosine. A 3-methylpyridinium carnosine adduct from the reaction of carnosine and acrolein was characterized using extensive spectroscopic measurements. The adduct with urinary concentrations of 1.82 ± 0.68 nmol/mg of creatinine is one of the most abundant acrolein metabolites in urine and opens promising therapeutic strategies for carnosine.

  5. Oxomemazine hydro­chloride

    Science.gov (United States)

    Siddegowda, M. S.; Butcher, Ray J.; Akkurt, Mehmet; Yathirajan, H. S.; Ramesh, A. R.

    2011-01-01

    In the title compound [systematic name: 3-(5,5-dioxo­phen­othia­zin-10-yl)-N,N,2-trimethyl­propanaminium chloride], C18H23N2O2S+·Cl−, the dihedral angle between the two outer aromatic rings of the phenothia­zine unit is 30.5 (2)°. In the crystal, the components are linked by N—H⋯Cl and C—H⋯Cl hydrogen bonds and C—H⋯π inter­actions. PMID:22090928

  6. Abacavir forms novel cross-linking abacavir protein adducts in patients.

    Science.gov (United States)

    Meng, Xiaoli; Lawrenson, Alexandre S; Berry, Neil G; Maggs, James L; French, Neil S; Back, David J; Khoo, Saye H; Naisbitt, Dean J; Park, B Kevin

    2014-04-21

    Abacavir (ABC), a nucleoside-analogue reverse transcriptase inhibitor, is associated with severe hypersensitivity reactions that are thought to involve the activation of CD8+ T cells in a HLA-B*57:01-restricted manner. Recent studies have claimed that noncovalent interactions of ABC with HLA-B*57:01 are responsible for the immunological reactions associated with ABC. However, the formation of hemoglobin-ABC aldehyde (ABCA) adducts in patients exposed to ABC suggests that protein conjugation might represent a pathway for antigen formation. To further characterize protein conjugation reactions, we used mass spectrometric methods to define ABCA modifications in patients receiving ABC therapy. ABCA formed a novel intramolecular cross-linking adduct on human serum albumin (HSA) in patients and in vitro via Michael addition, followed by nucleophilic adduction of the aldehyde with a neighboring protein nucleophile. Adducts were detected on Lys159, Lys190, His146, and Cys34 residues in the subdomain IB of HSA. Only a cysteine adduct and a putative cross-linking adduct were detected on glutathione S-transferase Pi (GSTP). These findings reveal that ABC forms novel types of antigens in all patients taking the drug. It is therefore vital that the immunological consequences of such pathways of haptenation are explored in the in vitro models that have been used by various groups to define new mechanisms of drug hypersensitivity exemplified by ABC.

  7. N-acetylcysteine prevents the geldanamycin cytotoxicity by forming geldanamycin-N-acetylcysteine adduct.

    Science.gov (United States)

    Mlejnek, Petr; Dolezel, Petr

    2014-09-05

    Geldanamycin (GDN) is a benzoquinone ansamycin antibiotic with anti-proliferative activity on tumor cells. GDN cytotoxicity has been attributed to the disruption of heat shock protein 90 (Hsp90) binding and stabilizing client proteins, and by the induction of oxidative stress with concomitant glutathione (GSH) depletion. The later mechanism of cytotoxicity can be abrogated by N-acetylcysteine (NAC). It was suggested that NAC prevents GDN cytotoxicity mainly by the restoring of glutathione (GSH) level (Clark et al., 2009). Here we argue that NAC does not protect cells from the GDN cytotoxicity by restoring the level of GSH. A detailed LC/MS/MS analysis of cell extracts indicated formation of GDN adducts with GSH. The amount of the GDN-GSH adduct is proportional to the GDN concentration and increases with incubation time. While nanomolar and low micromolar GDN concentrations induce cell death without an apparent GSH decrease, only much higher micromolar GDN concentrations cause a significant GSH decrease. Therefore, only high micromolar GDN concentrations can cause cell death which might be related to GSH depletion. Addition of NAC leads to the formation of adducts with GDN which diminish formation of GDN adducts with GSH. NAC also forms stable adducts with GDN extracellularly. Although NAC induces an increase in the GSH pool, this effect is not crucial for abrogation of GDN cytotoxicity. Indeed, the presence of NAC in the growth medium causes a rapid conversion of GDN into the GDN-NAC adduct, which is the real cause of the abrogated GDN cytotoxicity.

  8. Specific incorporation of an artificial nucleotide opposite a mutagenic DNA adduct by a DNA polymerase.

    Science.gov (United States)

    Wyss, Laura A; Nilforoushan, Arman; Eichenseher, Fritz; Suter, Ursina; Blatter, Nina; Marx, Andreas; Sturla, Shana J

    2015-01-14

    The ability to detect DNA modification sites at single base resolution could significantly advance studies regarding DNA adduct levels, which are extremely difficult to determine. Artificial nucleotides that are specifically incorporated opposite a modified DNA site offer a potential strategy for detection of such sites by DNA polymerase-based systems. Here we investigate the action of newly synthesized base-modified benzimidazole-derived 2'-deoxynucleoside-5'-O-triphosphates on DNA polymerases when performing translesion DNA synthesis past the pro-mutagenic DNA adduct O(6)-benzylguanine (O(6)-BnG). We found that a mutated form of KlenTaq DNA polymerase, i.e., KTqM747K, catalyzed O(6)-BnG adduct-specific processing of the artificial BenziTP in favor of the natural dNTPs. Steady-state kinetic parameters revealed that KTqM747K catalysis of BenziTP is 25-fold more efficient for template O(6)-BnG than G, and 5-fold more efficient than natural dTMP misincorporation in adduct bypass. Furthermore, the nucleotide analogue BenziTP is required for full-length product formation in O(6)-BnG bypass, as without BenziTP the polymerase stalls at the adduct site. By combining the KTqM747K polymerase and BenziTP, a first round of DNA synthesis enabled subsequent amplification of Benzi-containing DNA. These results advance the development of technologies for detecting DNA adducts.

  9. Sperm DNA adducts impair fertilization during ICSI but not during IVF.

    Directory of Open Access Journals (Sweden)

    Piotr Widłak

    2008-04-01

    Full Text Available Many studies emphasize the influence of the status of spermatozoal nucleus on fertilization, mainly with regard to DNA fragmentation. This study was undertaken to analyze the influence of DNA adducts content in spermatozoa on fertilization during assisted reproduction. Ovarian hyperstimulation, oocyte retrieval and laboratory work-up in 61 IVF (in vitro fertilization and 118 ICSI (intracytoplasmic sperm injection first cycles were performed according to the same protocol. Semen analysis was made according to WHO Manual (1999. DNA adducts assay in spermatozoa was performed by 32Ppostlabeling method. In total 331 fertilizable oocytes were obtained during IVF and 659 during ICSI. Both groups differed significantly by sperm count, motility and morphology but not by the concentration of DNA adducts in spermatozoa (0.0306 +/- 0.0217 in IVF versus 0.0373 +/- 0.0321 in ICSI. The fertilization rate during IVF was significantly influenced by sperm count (p=0.0002 and motility (p=0.0037 but not by DNA adducts concentration (p=0.30528, whereas during ICSI was positively influenced by sperm motility (p=0.04669 and negatively by DNA adducts concentration (p=0.00796. DNA adducts concentration in spermatozoa significantly negatively influences fertilization rate during ICSI, but not during IVF.

  10. Detection and characterization of DNA adducts formed from metabolites of the fungicide ortho-phenylphenol.

    Science.gov (United States)

    Zhao, Shouxun; Narang, Amarjit; Gierthy, John; Eadon, George

    2002-05-22

    The significance of DNA adduction in ortho-phenylphenol-induced carcinogenesis remains unclear. Establishing adduct structures may contribute to resolving this issue. The chemical structures of the DNA adduction products resulting from the in vitro reaction of phenylbenzoquinone, the putative ultimate carcinogenic metabolite of the fungicide/disinfectant ortho-phenylphenol, are reported here. Three isomeric adducts that resulted from reaction of deoxyguanosine were characterized by UV, LC-ESI-MS, and MS/MS, and 1D and 2D COSY-NMR spectroscopy. The proposed mechanism of product formation is nucleophilic attack by the deoxyguanosine exocyclic amine nitrogen on an electrophilic quinone carbon, followed by stabilization through enolization. Another nucleophilic attack forms a five-membered ring, which aromatizes by dehydration to form the final product. Adducts were also characterized from deoxyadenosine and deoxycytidine, although conversions were at least 10 times lower. Structures are also proposed for these products. Cell culture studies confirmed that HepG2 cells incubated with phenylbenzoquinone at concentrations associated with cytotoxicity form the same DNA adducts.

  11. Biomonitoring Human Albumin Adducts: The Past, the Present, and the Future

    Science.gov (United States)

    2016-01-01

    Serum albumin (Alb) is the most abundant protein in blood plasma. Alb reacts with many carcinogens and/or their electrophilic metabolites. Studies conducted over 20 years ago showed that Alb forms adducts with the human carcinogens aflatoxin B1 and benzene, which were successfully used as biomarkers in molecular epidemiology studies designed to address the role of these chemicals in cancer risk. Alb forms adducts with many therapeutic drugs or their reactive metabolites such as β-lactam antibiotics, acetylsalicylic acid, acetaminophen, nonsteroidal anti-inflammatory drugs, chemotherapeutic agents, and antiretroviral therapy drugs. The identification and characterization of the adduct structures formed with Alb have served to understand the generation of reactive metabolites and to predict idiosyncratic drug reactions and toxicities. The reaction of candidate drugs with Alb is now exploited as part of the battery of screening tools to assess the potential toxicities of drugs. The use of gas chromatography-mass spectrometry, liquid chromatography, or liquid chromatography-mass spectrometry (LC-MS) enabled the identification and quantification of multiple types of Alb xenobiotic adducts in animals and humans during the past three decades. In this perspective, we highlight the history of Alb as a target protein for adduction to environmental and dietary genotoxicants, pesticides, and herbicides, common classes of medicinal drugs, and endogenous electrophiles, and the emerging analytical mass spectrometry technologies to identify Alb-toxicant adducts in humans. PMID:27989119

  12. Scavenging of Toxic Acrolein by Resveratrol and Hesperetin and Identification of Adducts.

    Science.gov (United States)

    Wang, Weixin; Qi, Yajing; Rocca, James R; Sarnoski, Paul J; Jia, Aiqun; Gu, Liwei

    2015-11-04

    The objective of this study was to investigate the ability of resveratrol and hesperetin to scavenge acrolein at pH 7.4 and 37 °C. About 6.4 or 5.2% of acrolein remained after reaction with resveratrol or hesperetin for 12 h at equimolar concentrations. An acrolein-resveratrol adduct and two acrolein-hesperetin adducts were isolated. Their structures were elucidated using mass and NMR spectroscopy. Acrolein reacted with resveratrol at the C-2 and C-3 positions through nucleophilic addition and formed an additional heterocyclic ring. Two similar monoacrolein-conjugated adducts were identified for hesperetin. Spectroscopic data suggested each acrolein-hesperetin adduct was a mixture of four stereoisomers due to the existence of two chiral carbon atoms. Yield of adducts was low at pH 5.4 but increased at pH 7.4 and 8.4. Higher pH also promoted the formation of diacrolein adducts. Results suggest that resveratrol and hesperetin exert health benefits in part through neutralizing toxic acrolein in vivo.

  13. Assay of protein and peptide adducts of cholesterol ozonolysis products by hydrophobic and click enrichment methods.

    Science.gov (United States)

    Windsor, Katherine; Genaro-Mattos, Thiago C; Miyamoto, Sayuri; Stec, Donald F; Kim, Hye-Young H; Tallman, Keri A; Porter, Ned A

    2014-10-20

    Cholesterol undergoes ozonolysis to afford a variety of oxysterol products, including cholesterol-5,6-epoxide (CholEp) and the isomeric aldehydes secosterol A (seco A) and secosterol B (seco B). These oxysterols display numerous important biological activities, including protein adduction; however, much remains to be learned about the identity of the reactive species and the range of proteins modified by these oxysterols. Here, we synthesized alkynyl derivatives of cholesterol-derived oxysterols and employed a straightforward detection method to establish secosterols A and B as the most protein-reactive of the oxysterols tested. Model adduction studies with an amino acid, peptides, and proteins provide evidence for the potential role of secosterol dehydration products in protein adduction. Hydrophobic separation methods-Folch extraction and solid phase extraction (SPE)-were successfully applied to enrich oxysterol-adducted peptide species, and LC-MS/MS analysis of a model peptide-seco adduct revealed a unique fragmentation pattern (neutral loss of 390 Da) for that species. Coupling a hydrophobic enrichment method with proteomic analysis utilizing characteristic fragmentation patterns facilitates the identification of secosterol-modified peptides and proteins in an adducted protein. More broadly, these improved enrichment methods may give insight into the role of oxysterols and ozone exposure in the pathogenesis of a variety of diseases, including atherosclerosis, Alzheimer's disease, Parkinson's disease, and asthma.

  14. Effects of metal ion adduction on the gas-phase conformations of protein ions.

    Science.gov (United States)

    Flick, Tawnya G; Merenbloom, Samuel I; Williams, Evan R

    2013-11-01

    Changes in protein ion conformation as a result of nonspecific adduction of metal ions to the protein during electrospray ionization (ESI) from aqueous solutions were investigated using traveling wave ion mobility spectrometry (TWIMS). For all proteins examined, protein cations (and in most cases anions) with nonspecific metal ion adducts are more compact than the fully protonated (or deprotonated) ions with the same charge state. Compaction of protein cations upon nonspecific metal ion binding is most significant for intermediate charge state ions, and there is a greater reduction in collisional cross section with increasing number of metal ion adducts and increasing ion valency, consistent with an electrostatic interaction between the ions and the protein. Protein cations with the greatest number of adducted metal ions are no more compact than the lowest protonated ions formed from aqueous solutions. These results show that smaller collisional cross sections for metal-attached protein ions are not a good indicator of a specific metal-protein interaction in solution because nonspecific metal ion adduction also results in smaller gaseous protein cation cross sections. In contrast, the collisional cross section of α-lactalbumin, which specifically binds one Ca(2+), is larger for the holo-form compared with the apo-form, in agreement with solution-phase measurements. Because compaction of protein cations occurs when metal ion adduction is nonspecific, elongation of a protein cation may be a more reliable indicator that a specific metal ion-protein interaction occurs in solution.

  15. Simple chloride sensors for continuous groundwater monitoring

    DEFF Research Database (Denmark)

    Thorn, Paul; Mortensen, John

    2012-01-01

    The development of chloride sensors which can be used for continuous, on-line monitoring of groundwater could be very valuable in the management of our coastal water resources. However, sensor stability, drift, and durability all need to be addressed in order for the sensors to be used...... in continuous application. This study looks at the development of a simple, inexpensive chloride electrode, and evaluates its performance under continuous use, both in the laboratory and in a field test in a monitoring well. The results from the study showed a consistent response to changing chloride...... sensor remained responsive even at low chloride concentrations, where the conductivity electrode was no longer responding to changing chloride levels. With the results, it is believed that the simple chloride sensor could be used for continuous monitoring of groundwater quality....

  16. Influence of the chemical structure of functional monomers on their adhesive performance.

    Science.gov (United States)

    Van Landuyt, K L; Yoshida, Y; Hirata, I; Snauwaert, J; De Munck, J; Okazaki, M; Suzuki, K; Lambrechts, P; Van Meerbeek, B

    2008-08-01

    Functional monomers in adhesive systems can improve bonding by enhancing wetting and demineralization, and by chemical bonding to calcium. This study tested the hypothesis that small changes in the chemical structure of functional monomers may improve their bonding effectiveness. Three experimental phosphonate monomers (HAEPA, EAEPA, and MAEPA), with slightly different chemical structures, and 10-MDP (control) were evaluated. Adhesive performance was determined in terms of microtensile bond strength of 4 cements that differed only for the functional monomer. Based on the Adhesion-Decalcification concept, the chemical bonding potential was assessed by atomic absorption spectrophotometry of the dissolution rate of the calcium salt of the functional monomers. High bond strength of the adhesive cement corresponded to low dissolution rate of the calcium salt of the respective functional monomer. The latter is according to the Adhesion-Decalcification concept, suggestive of a high chemical bonding capacity. We conclude that the adhesive performance of an adhesive material depends on the chemical structure of the functional monomer.

  17. Monomer-dimer model on a scale-free small-world network

    Science.gov (United States)

    Zhang, Zhongzhi; Sheng, Yibin; Jiang, Qiang

    2012-02-01

    The explicit determination of the number of monomer-dimer arrangements on a network is a theoretical challenge, and exact solutions to monomer-dimer problem are available only for few limiting graphs with a single monomer on the boundary, e.g., rectangular lattice and quartic lattice; however, analytical research (even numerical result) for monomer-dimer problem on scale-free small-world networks is still missing despite the fact that a vast variety of real systems display simultaneously scale-free and small-world structures. In this paper, we address the monomer-dimer problem defined on a scale-free small-world network and obtain the exact formula for the number of all possible monomer-dimer arrangements on the network, based on which we also determine the asymptotic growth constant of the number of monomer-dimer arrangements in the network. We show that the obtained asymptotic growth constant is much less than its counterparts corresponding to two-dimensional lattice and Sierpinski fractal having the same average degree as the studied network, which indicates from another aspect that scale-free networks have a fundamentally distinct architecture as opposed to regular lattices and fractals without power-law behavior.

  18. Cellulose based hybrid hydroxylated adducts for polyurethane foams

    Science.gov (United States)

    De Pisapia, Laura; Verdolotti, Letizia; Di Mauro, Eduardo; Di Maio, Ernesto; Lavorgna, Marino; Iannace, Salvatore

    2012-07-01

    Hybrid flexible polyurethane foams (HPU) were synthesized by using a hybrid hydroxilated adduct (HHA) based on renewable resources. In particular the HHA was obtained by dispersing cellulose wastes in colloidal silica at room temperature, pressure and humidity. The colloidal silica was selected for its ability of modifying the cellulose structure, by inducing a certain "destructurization" of the crystalline phase, in order to allow cellulose to react with di-isocyanate for the final synthesis of the polyurethane foam. In fact, cellulose-polysilicate complexes are engaged in the reaction with the isocyanate groups. This study provides evidence of the effects of the colloidal silica on the cellulose structure, namely, a reduction of the microfiber cellulose diameter and the formation of hydrogen bonds between the polysilicate functional groups and the hydroxyl groups of the cellulose, as assessed by IR spectroscopy and solid state NMR. The HHA was added to a conventional polyol in different percentages (between 5 and 20%) to synthesize HPU in presence of catalysts, silicone surfactant and diphenylmethane diisocyanate (MDI). The mixture was expanded in a mold and cured for two hours at room temperature. Thermal analysis, optical microscopy and mechanical tests were performed on the foams. The results highlighted an improvement of thermal stability and a decrease of the cell size with respect neat polyurethane foam. Mechanical tests showed an improvement of the elastic modulus and of the damping properties with increasing HHA amount.

  19. Serum Acetaminophen Protein Adduct Concentrations in Pediatric Emergency Department Patients.

    Science.gov (United States)

    Heard, Kennon; Anderson, Victoria; Dart, Richard C; Kile, Deidre; Lavonas, Eric J; Green, Jody L

    2017-04-01

    Acetaminophen toxicity is a common cause of pediatric liver failure. The diagnosis may be limited by the short window of detection of acetaminophen in serum. Recently acetaminophen protein adducts (APAP-CYS) have been used as a biomarker with a longer duration of detection. The objective of this study was to describe the serum concentrations of APAP-CYS in pediatric patients with and without reported therapeutic acetaminophen exposure. A cross-sectional study of children age 1 to acetaminophen use and had serum APAP-CYS measured using LC/MS. One hundred patients were enrolled. All of the patients whose caregivers denied acetaminophen exposure had nondetectable APAP-CYS. Fifty-two percent of subjects who were reported to have taken acetaminophen in the preceding 2 weeks had detectable serum APAP-CYS. The APAP-CYS concentrations were positively correlated with higher overall dose and more recent ingestion. APAP-CYS is detectable in the majority of children taking acetaminophen and not detected in the majority of children who are not exposed to acetaminophen.

  20. 4-hydroxynonenal protein adducts: Key mediator in Rett syndrome oxinflammation.

    Science.gov (United States)

    Valacchi, Giuseppe; Pecorelli, Alessandra; Cervellati, Carlo; Hayek, Joussef

    2017-01-05

    In the last 15 years a strong correlation between oxidative stress (OxS) and Rett syndrome (RTT), a rare neurodevelopmental disorder known to be caused in 95% of the cases, by a mutation in the methyl-CpG-binding protein 2 (MECP2) gene, has been well documented. Here, we revised, summarized and discussed the current knowledge on the role of lipid peroxidation byproducts, with special emphasis on 4-hydroxynonenal (4HNE), in RTT pathophysiology. The posttranslational modifications of proteins via 4HNE, known as 4HNE protein adducts (4NHE-PAs), causing detrimental effects on protein functions, appear to contribute to the clinical severity of the syndrome, since their levels increase significantly during the subsequent 4 clinical stages, reaching the maximum degree at stage 4, represented by a late motor deterioration. In addition, 4HNE-PA are only partially removed due to the compromised functionality of the proteasome activity, contributing therefore to the cellular damage in RTT. All this will lead to a characteristic subclinical inflammation, defined "OxInflammation", derived by a positive feedback loop between OxS byproducts and inflammatory mediators that in a long run further aggravates the clinical features of RTT patients. Therefore, in a pathology completely orphan of any therapy, aiming 4HNE as a therapeutic target could represent a coadjuvant treatment with some beneficial impact in these patients.‬‬‬.

  1. Chloride Ion Critical Content in Reinforced Concrete

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Chloride ion critical content was studied under soaking and cycle of dry and wet conditions,with three electrochemical nondestructive measuring techniques, i e, half-cell potential, A C impedance, and time potential. The experimental results show that chloride ion critical content is primarily determined by the water cement ratio, while for the same concrete mixture the chloride ion critical content in soaking conditions is larger than that in a cycle of dry and wet conditions.

  2. Molecular weight recognition in the multiple-stranded helix of a synthetic polymer without specific monomer-monomer interaction.

    Science.gov (United States)

    Kumaki, Jiro; Kawauchi, Takehiro; Ute, Koichi; Kitayama, Tatsuki; Yashima, Eiji

    2008-05-21

    Stereoregular isotactic and syndiotactic poly(methyl methacrylate)s (it- and st-PMMAs) are known to form a multiple-stranded complementary helix, so-called stereocomplex (SC) through van der Waals interactions, which is a rare example of helical supramolecular structures formed by a commodity polymer. In this study, we prepared SCs by using uniform it- and st-PMMAs and those with a narrow molecular weight distribution having different molecular weights and investigated their structures in detail using high-resolution atomic force microscopy as a function of the molecular weight and molecular weight distribution of the component PMMAs. We found that complementary it- and st-PMMAs with the longer molecular length determine the total length of the SC, and molecules of the shorter component associate until they fill up or cover the longer component. These observations support a supramolecular triple-stranded helical structure of the SCs composed of a double-stranded helix of two intertwined it-PMMA chains included in a single helix of st-PMMA, and this triple-stranded helix model of the SCs appears to be applicable to the it- and st-PMMAs having a wide range of molecular weights we employed in this study. In homogeneous double-stranded helices of it-PMMA, it has been found that, in mixtures of two it-PMMAs with different molecular weights, chains of the same molecular weight selectively form a double-stranded it-PMMA helix, or recognize the molecular weights of each other ("molecular sorting"). We thus demonstrate that molecular weight recognition is possible, without any specific interaction between monomer units, through the formation of a topological multiple-stranded helical structure based upon van der Waals interaction.

  3. Chloride ingress in cement paste and mortar

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, O.M.; Hansen, P.F.; Coats, A.M.; Glasser, F.P.

    1999-09-01

    In this paper chloride ingress in cement paste and mortar is followed by electron probe microanalysis. The influence of several paste and exposure parameters on chloride ingress are examined (e.g., water-cement ratio, silica fume addition, exposure time, and temperature). The measurements are modelled on Fick's law modified by a term for chloride binding. Inclusion of chloride binding significantly improves the profile shape of the modelled ingress profiles. The presence of fine aggregate and formation of interfacial transition zones at paste-aggregate boundaries does not significantly affect diffusion rates.

  4. Investigation of hydrogen atom addition to vinyl monomers by time resolved ESR spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Beckert, D.; Mehler, K.

    1983-07-01

    By means of time resolved ESR spectroscopy in the microsecond time scale the H atom addition to different vinyl monomers was investigated. The H atoms produced by pulse radiolysis of aqueous solutions show a strong recombination CIDEP effect which also allows the recombination rate constant of H atoms to be determined. By analysis of ESR time profiles with the modified Bloch equations the relaxation times T/sub 1/, T/sub 2/, the polarization factors and the chemical rate constants with scavengers were obtained. Besides the H atom addition rate constants to different vinyl monomers the structure of the monomer radical was determined for acrylic acid.

  5. Influence of Monomer Types on the Designability of a Protein-Model Chain

    Institute of Scientific and Technical Information of China (English)

    梁好均; 王元元

    2002-01-01

    In a three-dimensional off-lattice model, the method of Shakhnovich and Gutin for minimizing the Hamiltonian is applied to the design of a protein-model chain. The effect of the number of hydrophobic and hydrophilic monomer types on the designability ora protein-model chain is investigated. The simulation results reveal that the number of hydrophobic monomer types is a much more important factor than that of the polar monomer types in the design of a protein-model chain.

  6. A review of adaptive mechanisms in cell responses towards oxidative stress caused by dental resin monomers.

    Science.gov (United States)

    Krifka, Stephanie; Spagnuolo, Gianrico; Schmalz, Gottfried; Schweikl, Helmut

    2013-06-01

    Dental composite resins are biomaterials commonly used to aesthetically restore the structure and function of teeth impaired by caries, erosion, or fracture. Residual monomers released from resin restorations as a result of incomplete polymerization processes interact with living oral tissues. Monomers like triethylene glycol dimethacrylate (TEGDMA) or 2-hydroxylethyl methacrylate (HEMA) are cytotoxic via apoptosis, induce genotoxic effects, and delay the cell cycle. Monomers also influence the response of cells of the innate immune system, inhibit specific odontoblast cell functions, or delay the odontogenic differentiation and mineralization processes in pulp-derived cells including stem cells. These observations indicate that resin monomers act as environmental stressors which inevitably disturb regulatory cellular networks through interference with signal transduction pathways. We hypothesize that an understanding of the cellular mechanisms underlying these phenomena will provide a better estimation of the consequences associated with dental therapy using composite materials, and lead to innovative therapeutic strategies and improved materials being used at tissue interfaces within the oral cavity. Current findings strongly suggest that monomers enhance the formation of reactive oxygen species (ROS), which is most likely the cause of biological reactions activated by dental composites and resin monomers. The aim of the present review manuscript is to discuss adaptive cell responses to oxidative stress caused by monomers. The particular significance of a tightly controlled network of non-enzymatic as well as enzymatic antioxidants for the regulation of cellular redox homeostasis and antioxidant defense in monomer-exposed cells will be addressed. The expression of ROS-metabolizing antioxidant enzymes like superoxide dismutase (SOD1), glutathione peroxidase (GPx1/2), and catalase in cells exposed to monomers will be discussed with particular emphasis on the role

  7. Green process to recover magnesium chloride from residue solution of potassium chloride production plant

    Institute of Scientific and Technical Information of China (English)

    Lin WANG; Yunliang HE; Yanfei WANG; Ying BAO; Jingkang WANG

    2008-01-01

    The green process to recover magnesium chlor-ide from the residue solution of a potassium chloride pro-duction plant, which comes from the leach solution of a potash mine in Laos, is designed and optimized. The res-idue solution contains magnesium chloride above 25 wt-%, potassium chloride and sodium chloride together below 5 wt-% and a few other ions such as Br-, SO2-4and Ca2+. The recovery process contains two steps: the previous impurity removal operation and the two-stage evapora-tion-cooling crystallization procedure to produce magnes-ium chloride. The crystallized impurity carnallite obtained from the first step is recycled to the potassium chloride plant to recover the potassium salt. The developed process is a zero discharge one and thus fulfills the requirements for green chemical industrial production. The produced magnesium chloride is up to industrial criteria.

  8. Dynamic conformations of nucleophosmin (NPM1 at a key monomer-monomer interface affect oligomer stability and interactions with granzyme B.

    Directory of Open Access Journals (Sweden)

    Wei D Duan-Porter

    Full Text Available Nucleophosmin (NPM1 is an abundant, nucleolar tumor antigen with important roles in cell proliferation and putative contributions to oncogenesis. Wild-type NPM1 forms pentameric oligomers through interactions at the amino-terminal core domain. A truncated form of NPM1 found in some hepatocellular carcinoma tissue formed an unusually stable oligomer and showed increased susceptibility to cleavage by granzyme B. Initiation of translation at the seventh methionine generated a protein (M7-NPM that shared all these properties. We used deuterium exchange mass spectrometry (DXMS to perform a detailed structural analysis of wild-type NPM1 and M7-NPM, and found dynamic conformational shifts or local "unfolding" at a specific monomer-monomer interface which included the β-hairpin "latch." We tested the importance of interactions at the β-hairpin "latch" by replacing a conserved tyrosine in the middle of the β-hairpin loop with glutamic acid, generating Y67E-NPM. Y67E-NPM did not form stable oligomers and further, prevented wild-type NPM1 oligomerization in a dominant-negative fashion, supporting the critical role of the β-hairpin "latch" in monomer-monomer interactions. Also, we show preferential cleavage by granzyme B at one of two available aspartates (either D161 or D122 in M7-NPM and Y67E-NPM, whereas wild-type NPM1 was cleaved at both sites. Thus, we observed a correlation between the propensity to form oligomers and granzyme B cleavage site selection in nucleophosmin proteins, suggesting that a small change at an important monomer-monomer interface can affect conformational shifts and impact protein-protein interactions.

  9. Compact bis-adduct fullerenes and additive-assisted morphological optimization for efficient organic photovoltaics.

    Science.gov (United States)

    Lai, Yun-Yu; Liao, Ming-Hung; Chen, Yen-Ting; Cao, Fong-Yi; Hsu, Chain-Shu; Cheng, Yen-Ju

    2014-11-26

    Bis-adduct fullerenes surrounded by two insulating addends sterically attenuate intermolecular interaction and cause inferior electron transportation. In this research, we have designed and synthesized a new class of bis-adduct fullerene materials, methylphenylmethano-C60 bis-adduct (MPC60BA), methylthienylmethano-C60 bis-adduct (MTC60BA), methylphenylmethano-C70 bis-adduct (MPC70BA), and methylthienylmethano-C70 bis-adduct (MTC70BA), functionalized with two compact phenylmethylmethano and thienylmethylmethano addends via cyclopropyl linkages. These materials with much higher-lying lowest unoccupied molecular orbital (LUMO) energy levels successfully enhanced the Voc values of the P3HT-based solar cell devices. The compact phenylmethylmethano and thienylmethylmethano addends to promote fullerene intermolecular interactions result in aggregation-induced phase separation as observed by the atomic force microscopy (AFM) and transmission electron microscopy (TEM) images of the poly(3-hexylthiophene-2,5-diyl) (P3HT)/bis-adduct fullerene thin films. The device based on the P3HT/MTC60BA blend yielded a Voc of 0.72 V, a Jsc of 5.87 mA/cm(2), and a fill factor (FF) of 65.3%, resulting in a power conversion efficiency (PCE) of 2.76%. The unfavorable morphologies can be optimized by introducing a solvent additive to fine-tune the intermolecular interactions. 1-Chloronaphthalene (CN) having better ability to dissolve the bis-adduct fullerenes can homogeneously disperse the fullerene materials into the P3HT matrix. Consequently, the aggregated fullerene domains can be alleviated to reach a favorable morphology. With the assistance of CN additive, the P3HT/MTC60BA-based device exhibited enhanced characteristics (a Voc of 0.78 V, a Jsc of 9.04 mA/cm(2), and an FF of 69.8%), yielding a much higher PCE of 4.92%. More importantly, the additive-assisted morphological optimization is consistently effective to all four compact bis-adduct fullerenes regardless of the methylphenylmethano

  10. Comparing polyaluminum chloride and ferric chloride for antimony removal.

    Science.gov (United States)

    Kang, Meea; Kamei, Tasuku; Magara, Yasumoto

    2003-10-01

    Antimony has been one of the contaminants required to be regulated, however, only limited information has been collected to date regarding antimony removal by polyaluminium chloride (PACl) and ferric chloride (FC). Accordingly, the possible use of coagulation by PACl or FC for antimony removal was investigated. Jar tests were used to determine the effects of solution pH, coagulant dosage, and pre-chlorination on the removal of various antimony species. Although high-efficiency antimony removal by aluminum coagulation has been expected because antimony is similar to arsenic in that both antimony and arsenic are a kind of metalloid in group V of the periodic chart, this study indicated: (1) removal density (arsenic or antimony removed per mg coagulant) for antimony by PACl was about one forty-fifth as low as observed for As(V); (2) although the removal of both Sb(III) and Sb(V) by coagulation with FC was much higher than that of PACl, a high coagulant dose of 10.5mg of FeL(-1) at optimal pH of 5.0 was still not sufficient to meet the standard antimony level of 2 microg as SbL(-1) for drinking water when around 6 microg as SbL(-1) were initially present. Consequently, investigation of a more appropriate treatment process is necessary to develop economical Sb reduction; (3) although previous studies concluded that As(V) is more effectively removed than As(III), this study showed that the removal of Sb(III) by coagulation with FC was much more pronounced than that of Sb(V); (4) oxidation of Sb(III) with chlorine decreased the ability of FC to remove antimony. Accordingly, natural water containing Sb(III) under anoxic condition should be coagulated without pre-oxidation.

  11. Revisiting the stability of endo/exo Diels-Alder adducts between cyclopentadiene and 1,4-benzoquinone

    Energy Technology Data Exchange (ETDEWEB)

    Tormena, Claudio F. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Inst. de Quimica. Dept. de Quimica Organica; Lacerda Junior, Valdemar [Universidade Federal do Espirito Santo (UFES), Vitoria, ES (Brazil). Centro de Ciencias Exatas. Dept. de Quimica; Oliveira, Kleber T. de [Universidade Federal do ABC (UFABC), Santo Andre, SP (Brazil). Centro de Ciencias Naturais e Humanas

    2010-07-01

    In this work it is presented a detailed theoretical analysis of the relative stability of endo/exo Diels-Alder adducts formed by the reaction between cyclopentadiene (1) and 1,4-benzoquinone (2). The intrinsic reaction coordinate (IRC) showed the existence of only one transition state for the reaction studied, for both endo 3 and exo 4 adducts. The energies of both adducts were obtained at high level of theory (CBS-Q) confirming that the endo adduct is more stable than exo, which is in the opposite way to the observed in reactions that usually follow Alder's rule. An electronic structure analysis was performed through NBO methodology, indicating that the attractive delocalization interaction predominates over the steric repulsive interaction in the endo adducts. In summary, for the studied cycloaddition reaction the endo adduct is the thermodynamic and kinetic product, which can be also confirmed by experimental data mentioned in this work. (author)

  12. Electrochemical Behavior of Copper in Thionyl Chloride Solutions.

    Science.gov (United States)

    1980-12-01

    lithium - thionyl chloride batteries . Thionyl chloride is known *3 to react...electrolyte for lithium - thionyl chloride batteries . 8R. K. McAlpine and B. A. Soule, Prescott and Johnson’s Qualitative Chemical Analysis, D. Van...black carbon electrodes, cupric chloride appears to be a useful cathode additive for lithium - thionyl chloride batteries . Preliminary results2l

  13. Preserving the Sequence of a Biopolymer's Monomers as They Enter an Electrospray Mass Spectrometer

    Science.gov (United States)

    Maulbetsch, William; Wiener, Benjamin; Poole, William; Bush, Joseph; Stein, Derek

    2016-11-01

    This paper investigates how faithfully an electrospray mass spectrometer reports the order of monomers of a single biopolymer in the context of two sequencing strategies. We develop a simplified one-dimensional theoretical model of the dynamics of Brownian particles in the Taylor cone of an electropray source, where free monomers drift towards the apex in an elongational force gradient. The likelihood that neighboring particles will invert their order decreases near the apex because the strength of the force gradient increases. Neighboring monomers on a stretched biopolymer should be cleaved by photofragmentation within about 3 nm of the apex if they are to enter the mass spectrometer in sequence with 95% probability under typical experimental conditions. Alternatively, if the monomers are cleaved processively at milliseconds-long intervals by an enzyme, their sequence will be faithfully reported with 95% confidence if the enzyme is within about 117 nm of the apex.

  14. Critical behavior in the cubic dimer model at nonzero monomer density

    Science.gov (United States)

    Sreejith, G. J.; Powell, Stephen

    2014-01-01

    We study critical behavior in the classical cubic dimer model (CDM) in the presence of a finite density of monomers. With attractive interactions between parallel dimers, the monomer-free CDM exhibits an unconventional transition from a Coulomb phase to a dimer crystal. Monomers act as charges (or monopoles) in the Coulomb phase and, at nonzero density, lead to a standard Landau-type transition. We use large-scale Monte Carlo simulations to study the system in the neighborhood of the critical point, and find results in agreement with detailed predictions of scaling theory. Going beyond previous studies of the transition in the absence of monomers, we explicitly confirm the distinction between conventional and unconventional criticality, and quantitatively demonstrate the crossover between the two. Our results also provide additional evidence for the theoretical claim that the transition in the CDM belongs in the same universality class as the deconfined quantum critical point in the SU (2) JQ model.

  15. Radiation-induced graft copolymerization of binary monomer mixture containing acrylonitrile onto polyethylene films

    Science.gov (United States)

    Choi, Seong-Ho; Nho, Young Chang

    2000-04-01

    Graft copolymerization of acrylonitrile (AN)/acrylic acid (AA), acrylonitrile (AN)/methacrylic acid (MA), and acrylonitrile (AN)/glycidyl methacrylate (GMA) onto pre-irradiated polyethylene (PE) films were studied. The effect of reaction conditions such as solvents, additives, and monomer composition on the grafting yields was investigated. The extent of grafting was found to increase with increasing sulfuric acid concentration when sulfuric acid as an additive was added to the grafting solution. In AN/AA mixture, the proportion of acrylonitrile in the copolymer increased with an increasing AN component in feed monomers. On the other hand, in AN/MA mixture, acrylonitrile component in copolymer was very slight in spite of the increase AN component in feed monomers. In the AN/GMA mixture, the proportion of acrylonitrile in the copolymer increased with increasing acrylonitrile component in AN/GMA feed monomer.

  16. Computational studies of the structural properties of the monomer and dimer of Aβ(1-28)

    Science.gov (United States)

    Dong, Xiao; Chen, Wei; Mousseau, Normand; Derreumaux, Philippe

    2007-03-01

    Neurodegenerative diseases are linked with the self-assembly of normally soluble proteins into amyloid fibrils. In this work, in silico characterization of the structures of the monomer and dimer of Aβ(1-28) are studied with the coarse-grained OPEP model using the activation-relaxation technique (ART nouveau). We find a dominant anti-parallel β-sheet structure present for both the monomer and dimer. While the monomer does not adopt a stable conformation, it fluctuates around a well-defined structure: starting from the end point, the monomer wraps a first time around, producing a β-hairpin and returns on the other side of the N-terminal, forming a three-strand β-sheet. The dimer assembles in a similar fashion, but with the two strands interlocking. The thermodynamics of the molecular assemblies and various folding path-ways are further studied using molecular dynamics.

  17. A novel quinoxaline bearing electroactive monomer: Pyrrole as the donor moiety

    Energy Technology Data Exchange (ETDEWEB)

    Taskin, Asli Tuba; Balan, Abidin; Epik, Bugra; Yildiz, Ersin [Middle East Technical University, Department of Chemistry, 06531, Ankara (Turkey); Udum, Yasemin Arslan [Gazi University, Institute of Science and Technology, Department of Advanced Technologies, 06570, Ankara (Turkey); Toppare, Levent [Middle East Technical University, Department of Chemistry, 06531, Ankara (Turkey)], E-mail: toppare@metu.edu.tr

    2009-09-30

    A novel electroactive monomer 5,8-di(1H-pyrrol-2-yl)-2,3-di(thiophen-2-yl)quinoxaline (PTQ) was successfully synthesized and its electrochromic properties were reported. Nuclear magnetic resonance ({sup 1}H NMR-{sup 13}C NMR) and mass spectroscopy were used to characterize the monomer. The monomer was electrochemically polymerized in the presence of tetrabutylammonium perchlorate (TBAP) as supporting electrolyte in dichloromethane. Monomer reveals relatively low oxidation potential at +0.70 V. Spectroelectrochemical behaviors and switching ability of homopolymer were investigated by UV-vis spectroscopy and cyclic voltammetry. Two {pi}-{pi}* transitions were observed at 400 and 815 nm with a low band gap, 1.0 eV. Polymer possesses 66% optical contrast in the Near IR region, which may be promising in NIR electrochromic device applications.

  18. Structures of benzo(a)pyrene-nucleic acid adducts formed in human and bovine bronchial explants

    DEFF Research Database (Denmark)

    1977-01-01

    obtained evidence that the same derivative is involved in the binding of BP to the DNA of human bronchial explants, although details of the specific isomer involved and of the structure of the adduct were not reported. We describe here studies on RNA and DNA adducts formed by human bronchial explants...... and provide evidence that the structures of the major adducts are similar to those formed in the analogous bovine system....

  19. 7-glutathione pyrrole adduct: a potential DNA reactive metabolite of pyrrolizidine alkaloids.

    Science.gov (United States)

    Xia, Qingsu; Ma, Liang; He, Xiaobo; Cai, Lining; Fu, Peter P

    2015-04-20

    Pyrrolizidine alkaloid (PA)-containing plants are the most common poisonous plants affecting livestock, wildlife, and humans. PAs require metabolic activation to form pyrrolic metabolites to exert cytotoxicity and tumorigenicity. We previously determined that metabolism of tumorigenic PAs produced four DNA adducts, designated as DHP-dG-3, DHP-dG-4, DHP-dA-3, and DHP-dA-4, that are responsible for liver tumor initiation. 7-Glutathione-(±)-6,7-dihydro-1-hydroxymethyl-5H-pyrrolizine (7-GS-DHP), formed in vivo and in vitro, and 7,9-di-GS-DHP, formed in vitro, are both considered detoxified metabolites. However, in this study we determined that incubation of 7-GS-DHP with 2'-deoxyguanosine (dG) and 2'-deoxyadenosine (dA) yields DHP-dG-3, DHP-dG-4, DHP-dA-3, and DHP-dA-4 adducts as well as the reactive metabolite DHP. Furthermore, reaction of 7-GS-DHP with calf thymus DNA in aqueous solution at 37 °C for 4, 8, 16, 24, 48, or 72 h, followed by enzymatic hydrolysis yielded DHP-dG-3, DHP-dG-4, DHP-dA-3, and DHP-dA-4 adducts. Under our current experimental conditions, DHP-dA-3 and DHP-dA-4 adducts were formed in a trace amount from the reaction of 7,9-di-GS-DHP with dA. No DHP-dG-3 or DHP-dG-4 adducts were detected from the reaction of 7,9-di-GS-DHP with dG. This study represents the first report that the 7-GS-DHP adduct can be a potential reactive metabolite of PAs leading to DNA adduct formation.

  20. Synthesis of an oligodeoxyribonucleotide adduct of mitomycin C by the postoligomerization method via a triamino mitosene.

    Science.gov (United States)

    Champeil, Elise; Paz, Manuel M; Ladwa, Sweta; Clement, Cristina C; Zatorski, Andrzej; Tomasz, Maria

    2008-07-23

    The cancer chemotherapeutic agent mitomycin C (MC) alkylates and cross-links DNA monofunctionally and bifunctionally in vivo and in vitro, forming six major MC-deoxyguanosine adducts of known structures. The synthesis of one of the monoadducts (8) by the postoligomerization method was accomplished both on the nucleoside and oligonucleotide levels, the latter resulting in the site-specific placement of 8 in a 12-mer oligodeoxyribonucleotide 26. This is the first application of this method to the synthesis of a DNA adduct of a complex natural product. Preparation of the requisite selectively protected triaminomitosenes 14 and 24 commenced with removal of the 10-carbamoyl group from MC, followed by reductive conversion to 10-decarbamoyl-2,7-diaminomitosene 10. This substance was transformed to 14 or 24 in several steps. Both were successfully coupled to the 2-fluoro-O(6)-(2-trimethylsilylethyl)deoxyinosine residue of the 12-mer oligonucleotide. The N(2)-phenylacetyl protecting group of 14 after its coupling to the 12-mer oligonucleotide could not be removed by penicillinamidase as expected. Nevertheless, the Teoc protecting group of 24 after coupling to the 12-mer oligonucleotide was removed by treatment with ZnBr2 to give the adducted oligonucleotide 26. However, phenylacetyl group removal was successful on the nucleoside-level synthesis of adduct 8. Proof of the structure of the synthetic nucleoside adduct included HPLC coelution and identical spectral properties with a natural sample, and (1)H NMR. Structure proof of the adducted oligonucleotide 26 was provided by enzymatic digestion to nucleosides and authentic adduct 8, as well as MS and MS/MS analysis.

  1. Thermodynamically stable amyloid-β monomers have much lower membrane affinity than the small oligomers.

    Science.gov (United States)

    Sarkar, Bidyut; Das, Anand K; Maiti, Sudipta

    2013-01-01

    Amyloid beta (Aβ) is an extracellular 39-43 residue long peptide present in the mammalian cerebrospinal fluid, whose aggregation is associated with Alzheimer's disease (AD). Small oligomers of Aβ are currently thought to be the key to toxicity. However, it is not clear why the monomers of Aβ are non-toxic, and at what stage of aggregation toxicity emerges. Interactions of Aβ with cell membranes is thought to be the initiator of toxicity, but membrane binding studies with different preparations of monomers and oligomers have not settled this issue. We have earlier found that thermodynamically stable Aβ monomers emerge spontaneously from oligomeric mixtures upon long term incubation in physiological solutions (Nag et al., 2011). Here we show that the membrane-affinity of these stable Aβ monomers is much lower than that of a mixture of monomers and small oligomers (containing dimers to decamers), providing a clue to the emergence of toxicity. Fluorescently labeled Aβ40 monomers show negligible binding to cell membranes of a neuronal cell line (RN46A) at physiological concentrations (250 nM), while oligomers at the same concentrations show strong binding within 30 min of incubation. The increased affinity most likely does not require any specific neuronal receptor, since this difference in membrane-affinity was also observed in a somatic cell-line (HEK 293T). Similar results are also obtained for Aβ42 monomers and oligomers. Minimal amount of cell death is observed at these concentrations even after 36 h of incubation. It is likely that membrane binding precedes subsequent slower toxic events induced by Aβ. Our results (a) provide an explanation for the non-toxic nature of Aβ monomers, (b) suggest that Aβ toxicity emerges at the initial oligomeric phase, and (c) provide a quick assay for monitoring the benign-to-toxic transformation of Aβ.

  2. Effect of food simulating liquids on release of monomers from two dental resin composites

    Directory of Open Access Journals (Sweden)

    Ghavam M

    2010-06-01

    Full Text Available "nBackground and Aims: The elution of residual monomers from cured dental composites to oral cavity has a harmful effect on human health and can affect their clinical durability. The purpose of this study was to evaluate the amount of eluted monomers (Bis-GMA, TEGDMA, UDMA from two types of composites (Gradia and P60 after exposure to food simulating liquids such as ethanol (25, 50, 75 % and heptane 50 % for 24 hours and 7 days. "nMaterials and Methods: Forty specimens of each composite were prepared. Equal numbers of each composite were immersed in tubes containing 2cc volumes of 25, 50, 75 % ethanole and 50 % heptane. The amount of eluted monomers in standard condition such as Bis-GMA, TEGDMA and UDMA was measured by GC/MS (Gas Chromatography/Mass Spectroscopy and results were statistically analysed by three way and one way ANOVA. P<0.05 was considered as the level of significancy. "nResults: The results showed that Gradia released more TEGDMA than P60. In assessing the effect of environment, the result showed that ethanol caused releasing monomers more than heptane and the concentration rate of 75 % ethanole resulted in most releasing of monomers. In assessing the effect of time, the observation showed that more monomers were released 7 days compared to 24 hours. Bis-GMA and UDMA were not detected in any solutions in these conditions. "nConclusion: Ethanole caused more release of monomers than heptane and 75 % ethanole released the most amount of monomers. Gradia released more amount of TEGDMA than P60.

  3. Triptycene-based ladder monomers and polymers, methods of making each, and methods of use

    KAUST Repository

    Pinnau, Ingo

    2015-02-05

    Embodiments of the present disclosure provide for a triptycene-based A-B monomer, a method of making a triptycene-based A-B monomer, a triptycene-based ladder polymer, a method of making a triptycene-based ladder polymers, a method of using triptycene-based ladder polymers, a structure incorporating triptycene-based ladder polymers, a method of gas separation, and the like.

  4. Qualitative and quantitative analysis of monomers in polyesters for food contact materials.

    Science.gov (United States)

    Brenz, Fabrian; Linke, Susanne; Simat, Thomas

    2017-02-01

    Polyesters (PESs) are gaining more importance on the food contact material (FCM) market and the variety of properties and applications is expected to be wide. In order to acquire the desired properties manufacturers can combine several FCM-approved polyvalent carboxylic acids (PCAs) and polyols as monomers. However, information about the qualitative and quantitative composition of FCM articles is often limited. The method presented here describes the analysis of PESs with the identification and quantification of 25 PES monomers (10 PCA, 15 polyols) by HPLC with diode array detection (HPLC-DAD) and GC-MS after alkaline hydrolysis. Accurate identification and quantification were demonstrated by the analysis of seven different FCM articles made of PESs. The results explained between 97.2% and 103.4% w/w of the polymer composition whilst showing equal molar amounts of PCA and polyols. Quantification proved to be precise and sensitive with coefficients of variation (CVs) below 6.0% for PES samples with monomer concentrations typically ranging from 0.02% to 75% w/w. The analysis of 15 PES samples for the FCM market revealed the presence of five different PCAs and 11 different polyols (main monomers, co-monomers, non-intentionally added substances (NIAS)) showing the wide variety of monomers in modern PESs. The presented method provides a useful tool for commercial, state and research laboratories as well as for producers and distributors facing the task of FCM risk assessment. It can be applied for the identification and quantification of migrating monomers and the prediction of oligomer compositions from the identified monomers, respectively.

  5. Shrinkage strain – Rates study of dental composites based on (BisGMA/TEGDMA monomers

    Directory of Open Access Journals (Sweden)

    A. Amirouche-Korichi

    2017-02-01

    The results revealed that the fraction of opaque filler had no significant effect on the shrinkage strain-rate and on the time at maximum shrinkage strain-rate but these two parameters are closely related to the monomer ratios and viscosity of the organic matrix. The results have confirmed the proportionality of the shrinkage strain and DC and showed that the filler contents and monomer ratios would not affect this proportionality.

  6. Radiation Induced Crosslinking of Polyethylene in the Presence of Bifunctional Vinyl Monomers

    DEFF Research Database (Denmark)

    Joshi, M. S.; Singer, Klaus Albert Julius; Silverman, J.

    1977-01-01

    Several reports have been published showing that the radiation induced grafting of bifunctional vinyl monomers to low density polyethylene results in a product with an unusually high density of crosslinks. The same grafting reactions are shown to reduce the incipient gel dose by more than a factor...... of fifty. This paper is concerned with the apparent crosslinking produced by the radiation grafting of two monomers to polyethylene: acrylic acid and acrylonitrile....

  7. Concomitant sensitization to glutaraldehyde and methacrylic monomers among dentists and their patients

    OpenAIRE

    Maya Grigorievna Lyapina; Maria Dencheva; Assya Krasteva-Panova; Mariana Tzekova-Yaneva; Mariela Deliverska; Angelina Kisselova-Yaneva

    2016-01-01

    Background: A multitude of methacrylic monomers is used in dentistry. Glutaraldehyde (G) is used in dental practice and consumer products as a broad-spectrum antimicrobial agent. The purpose of our study is to evaluate the frequency and the risk of concomitant sensitization to some methacrylic monomers (methyl methacrylate (MMA), triethyleneglycol dimethacrylate (TEGDMA), ethyleneglycol dimethacrylate (EGDMA), 2,2-bis-[4-(2-hydroxy-3-methacrylo-xypropoxy)phenyl]-propane (Bis-GMA), 2-hydroxy-e...

  8. Reliability-Based Planning of Chloride Measurements

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Engelund, S.

    1996-01-01

    on measurements of the chloride content obtained from the given structure. In the present paper optimal planning of measurements of the chloride content in reinforced concrete structures is considered. It is shown how optimal experimental plans can be obtained using FORM-analysis. Bayesian statistics are used...

  9. Chronopotentiometric chloride sensing using transition time measurement

    NARCIS (Netherlands)

    Abbas, Y.; Graaf, de D.B.; Olthuis, W.; Berg, van den A.

    2013-01-01

    Detection of chloride ions is crucial to accurately access the concrete structure durability[1]. The existing electrochemical method of chloride ions detection in concrete, potentiometry[1], is not suitable for in-situ measurement due to the long term stability issue of conventional reference electr

  10. Chloride binding site of neurotransmitter sodium symporters

    DEFF Research Database (Denmark)

    Kantcheva, Adriana Krassimirova; Quick, Matthias; Shi, Lei

    2013-01-01

    Neurotransmitter:sodium symporters (NSSs) play a critical role in signaling by reuptake of neurotransmitters. Eukaryotic NSSs are chloride-dependent, whereas prokaryotic NSS homologs like LeuT are chloride-independent but contain an acidic residue (Glu290 in LeuT) at a site where eukaryotic NSSs...

  11. Chloride ingress in cement paste and mortar

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Hansen, Per Freiesleben; Coats, Alison M.

    1999-01-01

    In this paper chloride ingress in cement paste and mortar is followed by electron probe microanalysis. The influence of several paste and exposure parameters on chloride ingress are examined (e.g., water-cement ratio, silica fume addition, exposure time, and temperature), The measurements...

  12. 29 CFR 1915.1017 - Vinyl chloride.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  13. 29 CFR 1926.1117 - Vinyl chloride.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Toxic and Hazardous Substances § 1926.1117 Vinyl chloride. Note: The requirements applicable to construction work under this section are identical to...

  14. Chemische contaminanten in diervoeder additief Choline Chloride

    NARCIS (Netherlands)

    Traag, W.A.; Hoogenboom, L.A.P.; Jong, de J.; Egmond, van H.J.; Dam, ten G.

    2010-01-01

    Dit briefrapport beschrijft de resultaten van een onderzoek naar chemische contaminanten in Choline Chloride. De doelstellingen waren: 1) Inzicht te verkrijgen in het voorkomen van (gebromeerde) vlamvertragers en broomdioxines in het diervoederadditief Choline Chloride en het, op basis van de result

  15. Ageing effect of chloride diffusion coefficient

    NARCIS (Netherlands)

    Polder, R.B.

    2006-01-01

    Most of the currently used models to predict chloride ingress a constant diffusion coefficient over time. However, a reduction of the diffusion coefficient over time, is ob-served at specimens that are exposed to chlorides. This reduction of the diffusion coefficient is expressed with the ageing coe

  16. A facile synthesis of 2,4,6-trichloroborazine from boron trichloride-dimethylsulfide complex and ammonium chloride

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    2,4,6-Trichloroborazine has been recognized as a desirable monomer for the preparation of high-performance boron nitride fibers through polymer derived ceramics route.So a high yield and facile synthesis of 2,4,6-trichloroborazine is essential in practice. Using boron trichloride-dimethylsulfide complex((CH_3)_2S·BCl_3) and ammonium chloride(NH_4Cl) as starting materials and toluene(C_6H_5CH_3) as solvent,the synthesis of 2,4,6-trichloroborazine to give high yield is reported.

  17. Fabrication and electrochemical properties of insoluble fullerene-diamine adduct thin-films as buffer layer by alternate immersion process

    Science.gov (United States)

    Saito, Jo; Akiyama, Tsuyoshi; Suzuki, Atsushi; Oku, Takeo

    2017-01-01

    Insoluble fullerene-diamine adduct thin-films consisting of C60 and 1,2-diaminoethane were easily fabricated on an electrode by an alternate immersion process. Formation of the C60-diamine adduct films were confirmed using transmission absorption spectroscopy and atomic force microscopy. An inverted-type organic solar cells were fabricated by using the C60-diamine adduct film as the electron transport layer. The resultant photoelectric conversation performance of the solar cells suggested that photocurrent is generated via the photoexcitation of polythiophene. The result suggests that the present insoluble fullerene-diamine adduct films worked as buffer layer for organic thin-film solar cells.

  18. Quantitation of cis-diamminedichloroplatinum II (cisplatin)-DNA-intrastrand adducts in testicular and ovarian cancer patients receiving cisplatin chemotherapy.

    Science.gov (United States)

    Reed, E; Yuspa, S H; Zwelling, L A; Ozols, R F; Poirier, M C

    1986-02-01

    The antitumor activity of cis-diamminedichloroplatinum II (cisplatin) is believed to be related to its covalent interaction with DNA where a major DNA binding product is an intrastrand N7-bidentate adduct on adjacent deoxyguanosines. A novel immunoassay was used to quantitate this adduct in buffy coat DNA from testicular and ovarian cancer patients undergoing cisplatin therapy. 44 out of 120 samples taken from 45 cisplatin patients had detectable cisplatin-DNA adducts. No adducts were detected in 18 samples of DNA taken from normal controls, patients on other chemotherapy, or patients before treatment. The quantity of measurable adducts increased as a function of cumulative dose of cisplatin. This was observed both during repeated daily infusion of the drug and over long-term, repeated 21-28 d cycles of administration. These results suggested that adduct removal is slow even though the tissue has a relatively rapid turnover. Patients receiving cisplatin for the first time on 56-d cycles, and those given high doses of cisplatin as a "salvage" regimen, did not accumulate adducts as rapidly as patients on first time chemotherapy on 21- or 28-d cycles. Disease response data, evaluated for 33 cisplatin-treated patients, showed a positive correlation between the formation of DNA adducts and response to drug therapy. However, more data will be required to confirm this relationship. These data show that specific immunological probes can readily be applied to quantitate DNA adducts in patients undergoing cancer chemotherapy.

  19. Residual monomer content determination in some acrylic denture base materials and possibilities of its reduction

    Directory of Open Access Journals (Sweden)

    Kostić Milena

    2009-01-01

    Full Text Available Background/Aim. Polymethyl methacrylate is used for producing a denture basis. It is a material made by the polymerization process of methyl methacrylate. Despite of the polymerization type, there is a certain amount of free methyl methacrylate (residual monomer incorporated in the denture, which can cause irritation of the oral mucosa. The aim of this study was to determine the amount of residual monomer in four different denture base acrylic resins by liquid chromatography and the possibility of its reduction. Methods. After the polymerization, a postpolymerization treatment was performed in three different ways: in boiling water for thirty minutes, with 500 W microwaves for three minutes and in steam bath at 22º C for one to thirty days. Results. The obtained results showed that the amount of residual monomer is significantly higher in cold polymerizing acrylates (9.1-11%. The amount of residual monomer after hot polymerization was in the tolerance range (0.59- 0.86%. Conclusion. The obtained results denote a low content of residual monomer in the samples which have undergone postpolymerization treatment. A lower percent of residual monomer is established in samples undergone a hot polymerization.

  20. Impregnation of mortars with monomers and their radiolytic polymerization. [Gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Gadalla, A.M.; El-Derini, M.E.

    1984-10-01

    Mortars were cured for a sufficient period to give sufficient strength and were then dried to remove the free water without dehydrating the compounds formed. Dried specimens were evacuated and impregnated with a mixture of styrene and acrylonitrile monomers which gives high mechanical properties after polymerization. Positive pressure was then applied, and polymerization was done radiolytically. The effect of degree and period of evacuation, the positive pressure and the irradiation dose on monomer loading, tensile and compressive strength were studied, and the optimum operating conditions were established. The achieved strength was correlated with the fraction of open pores impregnated. The composites investigated have the same volume fraction of mortar, and the polymer is added at the expense of the open porosity causing nearly an exponential increase in strength. Only 80% of the open pores were filled with polymers due to the difference in density between the polymer and the monomer, loss of monomer, and the presence of entrapped gas consisting of residual air and residual water vapor and monomer vapor, as well as due to the inability to fill all the micropores with monomer. A compressive strengh four times that of plain mortar and a tensile strength eight times that of plain mortar were achieved. 18 references, 12 figures.

  1. Tandem ring-opening/ring-closing metathesis polymerization: relationship between monomer structure and reactivity.

    Science.gov (United States)

    Park, Hyeon; Lee, Ho-Keun; Choi, Tae-Lim

    2013-07-24

    Monomers containing either cycloalkenes with low ring strain or 1-alkynes are poor monomers for olefin metathesis polymerization. Ironically, keeping two inactive functional groups in proximity within one molecule can make it an excellent monomer for metathesis polymerization. Recently, we demonstrated that monomer 1 having cyclohexene and propargyl moieties underwent rapid tandem ring-opening/ring-closing metathesis (RO/RCM) polymerization via relay-type mechanism. Furthermore, living polymerization was achieved when a third-generation Grubbs catalyst was used. Here, we present a full account on this tandem polymerization by investigating how various structural modifications of the monomers affected the reactivity of the tandem polymerization. We observed that changing the ring size of the cycloalkene moieties, the length of the alkynes, and linker units influenced not only the polymerization rates but also the reactivities of Diels-Alder reaction, which is a post-modification reaction of the resulting polymers. Also, the mechanism of tandem polymerization was studied by conducting end-group analysis using (1)H NMR analysis, thereby concluding that the polymerization occurred by the alkyne-first pathway. With this mechanistic conclusion, factors responsible for the dramatic structure-reactivity relationship were proposed. Lastly, tandem RO/RCM polymerization of monomers containing sterically challenging trisubstituted cycloalkenes was successfully carried out to give polymer repeat units having tetrasubstituted cycloalkenes.

  2. Enzymatic Specific Production and Chemical Functionalization of Phenylpropanone Platform Monomers from Lignin.

    Science.gov (United States)

    Ohta, Yukari; Hasegawa, Ryoichi; Kurosawa, Kanako; Maeda, Allyn H; Koizumi, Toshio; Nishimura, Hiroshi; Okada, Hitomi; Qu, Chen; Saito, Kaori; Watanabe, Takashi; Hatada, Yuji

    2017-01-20

    Enzymatic catalysis is an ecofriendly strategy for the production of high-value low-molecular-weight aromatic compounds from lignin. Although well-definable aromatic monomers have been obtained from synthetic lignin-model dimers, enzymatic-selective synthesis of platform monomers from natural lignin has not been accomplished. In this study, we successfully achieved highly specific synthesis of aromatic monomers with a phenylpropane structure directly from natural lignin using a cascade reaction of β-O-4-cleaving bacterial enzymes in one pot. Guaiacylhydroxylpropanone (GHP) and the GHP/syringylhydroxylpropanone (SHP) mixture are exclusive monomers from lignin isolated from softwood (Cryptomeria japonica) and hardwood (Eucalyptus globulus). The intermediate products in the enzymatic reactions show the capacity to accommodate highly heterologous substrates at the substrate-binding sites of the enzymes. To demonstrate the applicability of GHP as a platform chemical for bio-based industries, we chemically generate value-added GHP derivatives for bio-based polymers. Together with these chemical conversions for the valorization of lignin-derived phenylpropanone monomers, the specific and enzymatic production of the monomers directly from natural lignin is expected to provide a new stream in "white biotechnology" for sustainable biorefineries.

  3. DNA isolation and sample preparation for quantification of adduct levels by accelerator mass spectrometry.

    Science.gov (United States)

    Dingley, Karen H; Ubick, Esther A; Vogel, John S; Ognibene, Ted J; Malfatti, Michael A; Kulp, Kristen; Haack, Kurt W

    2014-01-01

    Accelerator mass spectrometry (AMS) is a highly sensitive technique used for the quantification of adducts following exposure to carbon-14- or tritium-labeled chemicals, with detection limits in the range of one adduct per 10(11)-10(12) nucleotides. The protocol described in this chapter provides an optimal method for isolating and preparing DNA samples to measure isotope-labeled DNA adducts by AMS. When preparing samples, special precautions must be taken to avoid cross-contamination of isotope among samples and produce a sample that is compatible with AMS. The DNA isolation method described is based upon digestion of tissue with proteinase K, followed by extraction of DNA using Qiagen isolation columns. The extracted DNA is precipitated with isopropanol, washed repeatedly with 70 % ethanol to remove salt, and then dissolved in water. DNA samples are then converted to graphite or titanium hydride and the isotope content measured by AMS to quantify adduct levels. This method has been used to reliably generate good yields of uncontaminated, pure DNA from animal and human tissues for analysis of adduct levels.

  4. Metabolic stability of superoxide adducts derived from newly developed cyclic nitrone spin traps.

    Science.gov (United States)

    Bézière, Nicolas; Hardy, Micael; Poulhès, Florent; Karoui, Hakim; Tordo, Paul; Ouari, Olivier; Frapart, Yves-Michel; Rockenbauer, Antal; Boucher, Jean-Luc; Mansuy, Daniel; Peyrot, Fabienne

    2014-02-01

    Reactive oxygen species are by-products of aerobic metabolism involved in the onset and evolution of various pathological conditions. Among them, the superoxide radical is of special interest as the origin of several damaging species such as H2O2, hydroxyl radical, or peroxynitrite (ONOO(-)). Spin trapping coupled with ESR is a method of choice to characterize these species in chemical and biological systems and the metabolic stability of the spin adducts derived from reaction of superoxide and hydroxyl radicals with nitrones is the main limit to the in vivo application of the method. Recently, new cyclic nitrones bearing a triphenylphosphonium or permethylated β-cyclodextrin moiety have been synthesized and their spin adducts demonstrated increased stability in buffer. In this article, we studied the stability of the superoxide adducts of four new cyclic nitrones in the presence of liver subcellular fractions and biologically relevant reductants using an original setup combining a stopped-flow device and an ESR spectrometer. The kinetics of disappearance of the spin adducts were analyzed using an appropriate simulation program. Our results highlight the interest of the new spin trapping agents CD-DEPMPO and CD-DIPPMPO for specific detection of superoxide with high stability of the superoxide adducts in the presence of liver microsomes.

  5. Serine Protease Catalysis: A Computational Study of Tetrahedral Intermediates and Inhibitory Adducts.

    Science.gov (United States)

    Ngo, Phong D; Mansoorabadi, Steven O; Frey, Perry A

    2016-08-04

    Peptide boronic acids and peptidyl trifluoromethyl ketones (TFKs) inhibit serine proteases by forming monoanionic, tetrahedral adducts to serine in the active sites. Investigators regard these adducts as analogs of monoanionic, tetrahedral intermediates. Density functional theory (DFT) calculations and fractional charge analysis show that tetrahedral adducts of model peptidyl TFKs are structurally and electrostatically very similar to corresponding tetrahedral intermediates. In contrast, the DFT calculations show the structures and electrostatic properties of analogous peptide boronate adducts to be significantly different. The peptide boronates display highly electrostatically positive boron, with correspondingly negative ligands in the tetrahedra. In addition, the computed boron-oxygen and boron-carbon bond lengths in peptide boronates (which are identical or very similar to the corresponding bonds in a peptide boronate adduct of α-lytic protease determined by X-ray crystallography at subangstrom resolution) are significantly longer than the corresponding bond lengths in model tetrahedral intermediates. Since protease-peptidyl TFKs incorporate low-barrier hydrogen bonds (LBHBs) between an active site histidine and aspartate, while the protease-peptide boronates do not, these data complement the spectroscopic and chemical evidence for the participation of LBHBs in catalysis by serine proteases. Moreover, while the potency of these classes of inhibitors can be correlated to the structures of the peptide moieties, the present results indicate that the strength of their bonds to serine contribute significantly to their inhibitory properties.

  6. DNA adduct formation by o-phenylphenol metabolite in vivo and in vitro.

    Science.gov (United States)

    Ushiyama, K; Nagai, F; Nakagawa, A; Kano, I

    1992-08-01

    [U-14C]o-Phenylphenol (OPP) was found to bind covalently to calf thymus DNA during a 60 min incubation in the presence of microsomes, but not in their absence, indicating that metabolic conversion of the parent compound, OPP, to an activated form is essential. Postlabeling analysis with bladder DNA of rats fed a diet containing 2% OPP for 13 weeks revealed one major adduct on TLC. In an in vitro postlabeling experiment with calf thymus DNA, both of the major metabolites of OPP, phenylhydroquinone (PHQ) and phenylbenzoquinone (PBQ), formed adducts, but no adducts were observed with OPP. The chemical structure responsible for adduct formation is thought to be the PHQ semiquinone radical intermediate formed during interconversion between PHQ and PBQ. When the oligonucleotides, pd(A)12-18, pd(C)12-18, pd(G)12-18 and pd(T)12-18, were used in vitro, only pd(G)12-18 gave TLC-detectable adducts on treatment with PHQ and PBQ. The covalent binding appears to be rather specific to guanine residues. These results suggest that covalent binding of the OPP metabolite is one of the underlying events in OPP-induced carcinogenesis in rats.

  7. Structural definition of early lysine and histidine adduction chemistry of 4-hydroxynonenal.

    Science.gov (United States)

    Nadkarni, D V; Sayre, L M

    1995-03-01

    The lipid peroxidation product trans-4-hydroxy-2-nonenal (HNE) has been implicated in the covalent modification of low-density lipoproteins (LDL) thought to contribute to the over-accumulation of LDL in the arterial wall in the initial stages of atherosclerosis. Proposals for the exact structures of "early" protein side-chain modifications until now have been based on indirect evidence. In this paper, the structures of first-formed His- and Lys-based adducts were elucidated by correlating NMR spectral properties with those obtained on models with reduced chiral center content, in some cases following hydride reduction. In this manner, we could confirm unambiguously the structure of a HNE-His imidazole(N tau) Michael adduct, stabilized as a cyclic hemiacetal and isolated from a neutral aqueous 1:1 stoichiometry reaction mixture. In the case of Lys/amine reactivity, where an excess of amine is needed to avert HNE aldol condensation, the predominance of a 1:1 Michael adduct in homogeneous aqueous solution and a 1:2 Michael-Schiff base adduct under two-phase aqueous-organic conditions could be verified by isolation of the respective borohydride-reduced forms. The 1:2 adduct, shown to exist as the cyclic hemiaminal, could represent a stable lysine-based cross-link in certain protein microenvironments.

  8. Purine DNA adducts of 4,5-dioxovaleric acid and 2,4-decadienal.

    Science.gov (United States)

    Cadet, J; Carvalho, V M; Onuki, J; Douki, T; Medeiros, M H; Di Mascio, P D

    1999-01-01

    The present overview describes recent findings on the formation of cyclic adducts of purine DNA bases after reaction with two aldehyde compounds, 4,5-dioxovaleric acid (DOVA) and 2,4-decadlenal (DDE), which are involved in 5-aminolaevulinic acid (ALA) accumulation and lipid peroxidation, respectively. ALA accumulates under pathological conditions and is associated with an increased incidence of liver cancer. The final oxidation product of ALA, DOVA, is an efficient alkylating agent of the guanine moieties in both nucleoside and isolated DNA. Adducts were produced through the formation of a Schiff base involving the N2-amino group of 2'-deoxyguanosine and the ketone function of DOVA, respectively. DDE is an important breakdown product of lipid peroxidation. It is cytotoxic to mammalian cells and is known to be implicated in DNA damage. It can bind to 2'-deoxyadenosine, yielding highly fluorescent products, including 1,N6-etheno-2'-deoxyadenosine and two other, related adducts. The reaction mechanism for the formation of DDE-2'-deoxyadenosine adducts involves epoxidation of DDE and subsequent addition of the resulting reactive intermediates to the N6 amino group of 2'-deoxyadenosine, followed by cyclization at the N1 site. Formation of endogenous DNA adducts may contribute to the genotoxic potential of ALA and DDE.

  9. Comparison of Bile Acids and Acetaminophen Protein Adducts in Children and Adolescents with Acetaminophen Toxicity.

    Science.gov (United States)

    James, Laura; Yan, Ke; Pence, Lisa; Simpson, Pippa; Bhattacharyya, Sudeepa; Gill, Pritmohinder; Letzig, Lynda; Kearns, Gregory; Beger, Richard

    2015-01-01

    Metabolomics approaches have enabled the study of new mechanisms of liver injury in experimental models of drug toxicity. Disruption of bile acid homeostasis is a known mechanism of drug induced liver injury. The relationship of individual bile acids to indicators of oxidative drug metabolism (acetaminophen protein adducts) and liver injury was examined in children with acetaminophen overdose, hospitalized children with low dose exposure to acetaminophen, and children with no recent exposure to acetaminophen. Nine bile acids were quantified through targeted metabolomic analysis in the serum samples of the three groups. Bile acids were compared to serum levels of acetaminophen protein adducts and alanine aminotransferase. Glycodeoxycholic acid, taurodeoxycholic acid, and glycochenodeoxycholic acid were significantly increased in children with acetaminophen overdose compared to healthy controls. Among patients with acetaminophen overdose, bile acids were higher in subjects with acetaminophen protein adduct values > 1.0 nmol/mL and modest correlations were noted for three bile acids and acetaminophen protein adducts as follows: taurodeoxycholic acid (R=0.604; pacetaminophen than in healthy children with no recent acetaminophen exposure. Compared to bile acids, acetaminophen protein adducts more accurately discriminated among children with acetaminophen overdose, children with low dose exposure to acetaminophen, and healthy control subjects. In children with acetaminophen overdose, elevations of conjugated bile acids were associated with specific indicators of acetaminophen metabolism and non-specific indicators of liver injury.

  10. Inhibition of nicotine-DNA adduct formation by polyphenolic compounds in vitro

    Institute of Scientific and Technical Information of China (English)

    CHENG Yan; WANG Hai-Fang; SUN Hong-Fang; LI Hong-Li

    2004-01-01

    Nicotine [3-(1-methyl-2-pyrrolidinyl)-pyridine], a major alkaloid in tobacco products, has proven to be a potential genotoxic compound. Some polyphenolic compounds can suppress the DNA adduction, and hence act as the potential inhibitors of carcinogenesis. In this study, the inhibitory effects of three polyphenolic compounds, curcumin (diferuloylmethane), resveratrol (trans-3, 5, 4-trihydroxystilbene) and tea polyphenols, on the nicotine-DNA adduction have been investigated in vitro using radiolabelled nicotine and liquid scintillation counting (LSC) technique. Also, the inhibition mechanism of these chemopreventive agents in regard to the activity of the biotransformation enzymes, including cytochrome P450 (CYP450), cytochrome b5 (CYb5) and glutathione S-transferase (GST), has been studied. The results demonstrated that these three polyphenols induced marked dose-dependent decrease in nicotine-DNA adducts as compared with the controls. The elimination rate of adducts reached above 46% at the highest dose for all the three agents with 51.6% for resveratrol. Correspondingly, three polyphenols all suppressed CYP450 and CYb5, whereas curcumin and resveratrol induced GST. We may arrive at a point that the three polyphenols are beneficial to prevent the nicotine adduct formation, and thus may be used to block the potential carcinogenesis induced by nicotine.

  11. Pyrrolizidine alkaloid-derived DNA adducts are common toxicological biomarkers of pyrrolizidine alkaloid N-oxides.

    Science.gov (United States)

    He, Xiaobo; Xia, Qingsu; Woodling, Kellie; Lin, Ge; Fu, Peter P

    2017-10-01

    There are 660 pyrrolizidine alkaloids (PAs) and PA N-oxides present in the plants, with approximately half being possible carcinogens. We previously reported that a set of four PA-derived DNA adducts is formed in the liver of rats administered a series of hepatocarcinogenic PAs and a PA N-oxide. Based on our findings, we hypothesized that this set of DNA adducts is a common biological biomarker of PA-induced liver tumor formation. In this study, we determined that rat liver microsomal metabolism of five hepatocarcinogenic PAs (lasiocarpine, retrorsine, riddelliine, monocrotaline, and heliotrine) and their corresponding PA N-oxides produced the same set of DNA adducts. Among these compounds, lasiocarpine N-oxide, retrorsine N-oxide, monocrotaline N-oxide, and heliotrine N-oxide are for first time shown to be able to produce these DNA adducts. These results further support the role of these DNA adducts as potential common biomarkers of PA-induced liver tumor initiation. Copyright © 2017. Published by Elsevier B.V.

  12. Formation of DNA Adducts by Ellipticine and Its Micellar Form in Rats — A Comparative Study

    Directory of Open Access Journals (Sweden)

    Marie Stiborova

    2014-12-01

    Full Text Available The requirements for early diagnostics as well as effective treatment of cancer diseases have increased the pressure on development of efficient methods for targeted drug delivery as well as imaging of the treatment success. One of the most recent approaches covering the drug delivery aspects is benefitting from the unique properties of nanomaterials. Ellipticine and its derivatives are efficient anticancer compounds that function through multiple mechanisms. Formation of covalent DNA adducts after ellipticine enzymatic activation is one of the most important mechanisms of its pharmacological action. In this study, we investigated whether ellipticine might be released from its micellar (encapsulated form to generate covalent adducts analogous to those formed by free ellipticine. The 32P-postlabeling technique was used as a useful imaging method to detect and quantify covalent ellipticine-derived DNA adducts. We compared the efficiencies of free ellipticine and its micellar form (the poly(ethylene oxide-block-poly(allyl glycidyl ether (PAGE-PEO block copolymer, P 119 nanoparticles to form ellipticine-DNA adducts in rats in vivo. Here, we demonstrate for the first time that treatment of rats with ellipticine in micelles resulted in formation of ellipticine-derived DNA adducts in vivo and suggest that a gradual release of ellipticine from its micellar form might produce the enhanced permeation and retention effect of this ellipticine-micellar delivery system.

  13. Foot rotation--a potential target to modify the knee adduction moment.

    Science.gov (United States)

    Teichtahl, A J; Morris, M E; Wluka, A E; Baker, R; Wolfe, R; Davis, S R; Cicuttini, F M

    2006-05-01

    Isolating the particular joints/limb segments associated with knee adductor moment variability may provide clinically important data that could help to identify strategies to reduce medial tibiofemoral joint load. The aim of this study was to examine whether or not foot and thigh rotation during human locomotion are significant determinants of knee adductor moment variability. Three-dimensional gait analyses were performed on 32 healthy adult women (mean age 54+/-12 years, mean BMI 25+/-4 kg m(-2)) with radiologically normal knees. The relationships between foot rotation, thigh rotation and the external knee adduction moment were examined during early and late-stance phases of the gait cycle. The degree of foot rotation correlated significantly with the magnitude of the peak knee adduction moment during late stance (r=0.40, p=0.024). No significant associations were apparent between thigh rotation and the peak knee adduction moment. The association between foot rotation and the knee adduction moment in this study suggests that women who walk with external rotation at the foot reduce their knee adduction moment during late stance. This result implies that changes in foot kinematics can modify the medial tibiofemoral load during gait, which may be important in the prevention and management of knee osteoarthritis.

  14. Kinetic measurement of esterase-mediated hydrolysis for methacrylate monomers used in dental composite biomaterials

    Science.gov (United States)

    Russo, Karen Ann

    Methacrylate-based monomers are routinely used in medical biomaterials. Monomers undergo polymerization reactions to form the solid resin. These polymerization reactions can be incomplete thus making unpolymerized monomer available for possible biodistribution. Understanding the fate of these monomers is essential not only for their toxicological profile but also for development of future biomaterials. Aromatic methacrylate-based monomers included in this study were bisphenol A dimethacrylate and bisphenol A diglycidyl dimethathacrylate; aliphatic methacrylate monomers were 2-hydroxyethyl methacrylate and triethyleneglycol dimethacrylate. These compounds contain ester moieties thought to be susceptible to esterase-mediated hydrolysis. The hypothesis was that the ester bond of the methacrylate monomers can be hydrolyzed by esterases and these reactions would occur in a measurable, time-dependent manner confirmed by specific Michaelis-Menten kinetic relationships. Including aliphatic and aromatic methacrylate monomers in this work allowed for structure-based comparisons. In vitro enzymolysis of the test compounds by acetylcholinesterase and cholesterol esterase was performed in buffered solutions. The hydrolysis reactions were monitored by high performance liquid chromatography with ultraviolet detection. The disappearance of parent compound and appearance of hydrolysis products were quantitated. The aromatic methacrylate monomers, bisphenol A dimethacrylate and bisphenol A diglycidyl dimethacrylate, were resistant to acetylcholine esterase hydrolysis but were converted by cholesterol esterase. The putative xenoestrogen, bisphenol A, was identified as a hydrolysis product from bisphenol A dimethacrylate conversion. Cholesterol esterase induced hydrolysis of bisphenol A diglycidyl dimethacrylate yielded a Km value of 1584 muM and Vmax of 14 muM min-1. Triethyleneglycol was converted by both esterases with calculated Km values of 394 and 1311 muM for acetylcholine

  15. Immunochemical quantitation of 3-(cystein-S-yl)acetaminophen adducts in serum and liver proteins of acetaminophen-treated mice.

    Science.gov (United States)

    Pumford, N R; Hinson, J A; Potter, D W; Rowland, K L; Benson, R W; Roberts, D W

    1989-01-01

    Using a recently developed enzyme-linked immunosorbent assay specific for 3-(cystein-S-yl)acetaminophen adducts we have quantitated the formation of these specific adducts in liver and serum protein of B6C3F1 male mice dosed with acetaminophen. Administration of acetaminophen at doses of 50, 100, 200, 300, 400 and 500 mg/kg to mice resulted in evidence of hepatotoxicity (increase in serum levels of alanine aminotransferase and aspartate aminotransferase) at 4 hr in the 300, 400 and 500 mg/kg treatment groups only. The formation of 3-(cystein-S-yl)acetaminophen adducts in liver protein was not observed in the groups receiving 50, 100 and 200 mg/kg doses, but was observed in the groups receiving doses above 300 mg/kg of acetaminophen. Greater levels of adduct formation were observed at the higher doses. 3-(Cystein-S-yl)acetaminophen protein adducts were also observed in serum of mice receiving hepatotoxic doses of acetaminophen. After a 400 mg/kg dose of acetaminophen, 3-(cystein-S-yl)acetaminophen adducts in the liver protein reached peak levels 2 hr after dosing. By 12 hr the levels decreased to approximately 10% of the peak level. In contrast, 3-(cystein-S-yl)acetaminophen adducts in serum protein were delayed, reaching a sustained peak 6 to 12 hr after dosing. The dose-response correlation between the appearance of serum aminotransferases and 3-(cystein-S-yl)acetaminophen adducts in serum protein and the temporal correlation between the decrease in 3-(cystein-S-yl)acetaminophen adducts in liver protein and the appearance of adducts in serum protein are consistent with a hepatic origin of the adducts detected in serum protein.(ABSTRACT TRUNCATED AT 250 WORDS)

  16. 32P-postlabelling analysis of dibenz[a,j]acridine-DNA adducts in mice: identification of proximate metabolites.

    Science.gov (United States)

    Talaska, G; Roh, J; Schamer, M; Reilman, R; Xue, W; Warshawsky, D

    1995-03-30

    N-Heterocyclic polynuclear aromatics are widely-occurring environmental pollutants formed during the pyrolysis of nitrogen-containing organic chemicals. Dibenz[a,j]acridine (DBA), a member of this class, has been shown to be a skin carcinogen in mice. We undertook studies to determine the organ distribution of DBA-DNA adducts and to identify the DBA metabolites which lead to the formation of carcinogen-DNA adducts in vivo. DBA and its metabolites, trans-DBA-1,2-dihydrodiol (DBA-1,2-DHD) trans-DBA-3,4-dihydrodiol (DBA-3,4-DHD) and trans-DBA-5,6-dihydrodiol (DBA-5,6-DHD), were topically applied on mice. DNA was isolated using enzyme-solvent extraction methods, and analyzed for carcinogen-DNA adducts using 32P-postlabelling. In skin, DBA produced two distinct adducts (Adducts 1 and 2). The same two adducts were seen when DBA-3,4-DHD was applied. In addition, the total adduct level elicited by DBA-3,4-DHD was twice that of the parent compound. Two adducts (Adducts 3 and 4) were also seen in mouse skin when DBA-5,6-DHD was applied, but these differed chromatographically from adducts seen with DBA. However, when DBA-3,4-DHD was applied and analyzed using sensitive nuclease P1 32P-postlabelling, all four adducts could be detected. These results suggest that the major route of DBA activation to DNA-binding species in skin is through formation of DBA-3,4-DHD and subsequent metabolism of this compound to a bay-region diol-epoxide. However, we postulate that another activation pathway may proceed through a bis-dihydrodiol-epoxide.

  17. Acetaminophen-cysteine adducts during therapeutic dosing and following overdose

    Directory of Open Access Journals (Sweden)

    Judge Bryan S

    2011-03-01

    Full Text Available Abstract Background Acetaminophen-cysteine adducts (APAP-CYS are a specific biomarker of acetaminophen exposure. APAP-CYS concentrations have been described in the setting of acute overdose, and a concentration >1.1 nmol/ml has been suggested as a marker of hepatic injury from acetaminophen overdose in patients with an ALT >1000 IU/L. However, the concentrations of APAP-CYS during therapeutic dosing, in cases of acetaminophen toxicity from repeated dosing and in cases of hepatic injury from non-acetaminophen hepatotoxins have not been well characterized. The objective of this study is to describe APAP-CYS concentrations in these clinical settings as well as to further characterize the concentrations observed following acetaminophen overdose. Methods Samples were collected during three clinical trials in which subjects received 4 g/day of acetaminophen and during an observational study of acetaminophen overdose patients. Trial 1 consisted of non-drinkers who received APAP for 10 days, Trial 2 consisted of moderate drinkers dosed for 10 days and Trial 3 included subjects who chronically abuse alcohol dosed for 5 days. Patients in the observational study were categorized by type of acetaminophen exposure (single or repeated. Serum APAP-CYS was measured using high pressure liquid chromatography with electrochemical detection. Results Trial 1 included 144 samples from 24 subjects; Trial 2 included 182 samples from 91 subjects and Trial 3 included 200 samples from 40 subjects. In addition, we collected samples from 19 subjects with acute acetaminophen ingestion, 7 subjects with repeated acetaminophen exposure and 4 subjects who ingested another hepatotoxin. The mean (SD peak APAP-CYS concentrations for the Trials were: Trial 1- 0.4 (0.20 nmol/ml, Trial 2- 0.1 (0.09 nmol/ml and Trial 3- 0.3 (0.12 nmol/ml. APAP-CYS concentrations varied substantially among the patients with acetaminophen toxicity (0.10 to 27.3 nmol/ml. No subject had detectable APAP

  18. Chloride Transport in Undersea Concrete Tunnel

    Directory of Open Access Journals (Sweden)

    Yuanzhu Zhang

    2016-01-01

    Full Text Available Based on water penetration in unsaturated concrete of underwater tunnel, a diffusion-advection theoretical model of chloride in undersea concrete tunnel was proposed. The basic parameters including porosity, saturated hydraulic conductivity, chloride diffusion coefficient, initial water saturation, and moisture retention function of concrete specimens with two water-binder ratios were determined through lab-scale experiments. The variation of chloride concentration with pressuring time, location, solution concentration, initial saturation, hydraulic pressure, and water-binder ratio was investigated through chloride transport tests under external water pressure. In addition, the change and distribution of chloride concentration of isothermal horizontal flow were numerically analyzed using TOUGH2 software. The results show that chloride transport in unsaturated concrete under external water pressure is a combined effect of diffusion and advection instead of diffusion. Chloride concentration increased with increasing solution concentration for diffusion and increased with an increase in water pressure and a decrease in initial saturation for advection. The dominant driving force converted with time and saturation. When predicting the service life of undersea concrete tunnel, it is suggested that advection is taken into consideration; otherwise the durability tends to be unsafe.

  19. Anisotropy of the monomer random walk in a polymer melt: local-order and connectivity effects

    Science.gov (United States)

    Bernini, S.; Leporini, D.

    2016-05-01

    The random walk of a bonded monomer in a polymer melt is anisotropic due to local order and bond connectivity. We investigate both effects by molecular-dynamics simulations on melts of fully-flexible linear chains ranging from dimers (M  =  2) up to entangled polymers (M  =  200). The corresponding atomic liquid is also considered a reference system. To disentangle the influence of the local geometry and the bond arrangements, and to reveal their interplay, we define suitable measures of the anisotropy emphasising either the former or the latter aspect. Connectivity anisotropy, as measured by the correlation between the initial bond orientation and the direction of the subsequent monomer displacement, shows a slight enhancement due to the local order at times shorter than the structural relaxation time. At intermediate times—when the monomer displacement is comparable to the bond length—a pronounced peak and then decays slowly as t -1/2, becoming negligible when the displacement is as large as about five bond lengths, i.e. about four monomer diameters or three Kuhn lengths. Local-geometry anisotropy, as measured by the correlation between the initial orientation of a characteristic axis of the Voronoi cell and the subsequent monomer dynamics, is affected at shorter times than the structural relaxation time by the cage shape with antagonistic disturbance by the connectivity. Differently, at longer times, the connectivity favours the persistence of the local-geometry anisotropy, which vanishes when the monomer displacement exceeds the bond length. Our results strongly suggest that the sole consideration of the local order is not enough to understand the microscopic origin of the rattling amplitude of the trapped monomer in the cage of the neighbours.

  20. Synthesis and evaluation of novel siloxane-methacrylate monomers used as dentin adhesives

    Science.gov (United States)

    Ge, Xueping; Ye, Qiang; Song, Linyong; Misra, Anil; Spencer, Paulette

    2014-01-01

    Objectives The objectives of this study were to synthesize two new siloxane-methacrylate (SM) monomers for application in dentin adhesives and to investigate the influence of different functionality of the siloxane-containing monomers on the adhesive photopolymerization, water sorption, and mechanical properties. Materials and method Two siloxane-methacrylate monomers (SM1 and SM2) with four and eight methacrylate groups were synthesized. Dentin adhesives containing BisGMA, HEMA and the siloxane-methacrylate monomers were photo-polymerized. The experimental adhesives were compared with the control adhesive (HEMA/BisGMA 45/55 w/w) and characterized with regard to degree of conversion (DC), water miscibility of the liquid resin, water sorption and dynamic mechanical analysis (DMA). Results The experimental adhesives exhibited improved water miscibility as compared to the control. When cured in the presence of 12 wt % water to simulate the wet environment of the mouth, the SM-containing adhesives showed DC comparable to the control. The experimental adhesives showed higher rubbery modulus than the control under dry conditions. Under wet conditions, the mechanical properties of the formulations containing SM monomer with increased functionality were comparable with the control, even with more water sorption. Significance The concentration and functionality of the newly synthesized siloxane-methacrylate monomers affected the water miscibility, water sorption and mechanical properties of the adhesives. The experimental adhesives show improved water compatibility compared with the control. The mechanical properties were enhanced with an increase of the functionality of the siloxane-containing monomers. The results provide critical structure/property relationships and important information for future development of durable, versatile siloxane-containing dentin adhesives. PMID:24993811

  1. Thermodynamically stable amyloid-β monomers have much lower membrane affinity than the small oligomers

    Directory of Open Access Journals (Sweden)

    Bidyut eSarkar

    2013-04-01

    Full Text Available Amyloid beta (Aβ is an extracellular 39-43 residue long peptide present in the mammalian cerebrospinal fluid, whose aggregation is associated with Alzheimer’s disease. Small oligomers of Aβ are currently thought to be the key to toxicity. However, it is not clear why the monomers of Aβ are non-toxic, and at what stage of aggregation toxicity emerges. Interactions of Aβ with cell membranes is thought to be the initiator of toxicity, but membrane-binding studies with different preparations of monomers and oligomers have not settled this issue. We have earlier found that thermodynamically stable Aβ monomers emerge spontaneously from oligomeric mixtures upon long term incubation in physiological solutions (Nag et al, JBC, 2011. Here we show that the membrane-affinity of these stable Aβ monomers is much lower than that of a mixture of small oligomers (containing dimers to decamers, providing a clue to the emergence of toxicity. Fluorescently labeled Aβ40 monomers show negligible binding to cell membranes of a neuronal cell line (RN46A at physiological concentrations (250 nM, while oligomers at the same concentrations show strong binding within 30 minutes of incubation. The increased affinity most likely does not require any specific neuronal receptor, since this difference in membrane-affinity was also observed in a somatic cell-line (HEK 293T. Similar results are also obtained for Aβ42 monomers and oligomers. Minimal amount of cell death is observed at these concentrations even after 36 hours of incubation. It is likely that membrane binding precedes subsequent slower toxic events induced by Aβ. Our results a provide an explanation for the non-toxic nature of Aβ monomers, b suggest that Aβ toxicity emerges at the initial oligomeric phase, and c provide a quick assay for monitoring the benign-to-toxic transformation of Aβ.

  2. Rotational Investigation of the Adducts of Formic Acid with Alcohols, Ethers and Esters

    Science.gov (United States)

    Evangelisti, Luca; Spada, Lorenzo; Li, Weixing; Caminati, Walther

    2016-06-01

    Mixtures of formic acid with methyl alcohol, with isopropyl alcohol, with tert-butyl alcohol, with dimethylether and with isopropylformiate have been supersonically expanded as pulsed jets. The obtained cool plumes have been analyzed by Fourier transform microwave spectroscopy. It has been possible to assign the rotational spectra of the 1:1 adducts of formic acid with tert-butyl alcohol, with dimethyl ether and with isopropylformiate. The conformational shapes and geometries of these adducts, as well as the topologies of their itermolecular hydrogen bonds will be presented. An explanation is given of the failure of the assignments of the rotational spectra of the adducts of formic acid with methyl alcohol and isopropyl alcohol.

  3. Kinetic studies of the decom position reaction of adducts of dinuclear Fe( Ⅱ )/O2

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Kinetic studies of the decomposition reaction of dinuclear Fe( Ⅱ ) adducts [Fe2(N-Et-HPTB){O2P(OPh)2}](CIO4)2 (1)and [Fe2(N-Et-HPTB) {O2P(Ph)2}] (CIO4)2 (2) with O2 have been carried out at low temperature using UV-vis spectra. The decomposition reaction of Fe( Ⅱ)/O2 adducts was first-order in the experimental conditions, and the activation parameters were obtained. △H¢ = 85.62 kJ @ mol-1, △S≠= 19.43 J @ mol-1 @ K-1 for compound (1) and △H¢ = 97.97 kJ @ mol-1,△S≠ = 55.68 J @ mol-1 @ K-1 for compound (2). These results are similar to those of dioxygen adducts of other metals complexes and natural enzymes such as methane monooxygenase (MMOH).

  4. Safrole-DNA adduct in hepatocellular carcinoma associated with betel quid chewing.

    Science.gov (United States)

    Chung, Yu-Ting; Chen, Chiu-Lan; Wu, Cheng-Chung; Chan, Shan-An; Chi, Chin-Wen; Liu, Tsung-Yun

    2008-12-15

    Betel quid chewing, which contributes high concentration of safrole in saliva, is a popular oral habit in Taiwan. Safrole is a documented rodent hepatocarcinogen, yet its hepatocarcinogenic potential in human is not known. Here, we used LC/ESI-ITMS(n) and LC/QTOF-MS confirmed safrole-dGMP as reference standard to detect the safrole-DNA adduct in hepatic tissues from HBsAg-/HCV-seronegative hepatocellular carcinoma patients by (32)P-postlabeling. We first synthesized and confirmed safrole-dGMP by LC/MS. Two isomeric safrole-dGMPs were characterized as N(2)-(trans-isosafrol-3'-yl) deoxyguanosine and N(2)-(safrol-1'-yl) deoxyguanosine. This technique was able to detect hepatic safrole-DNA adduct in mice that were treated with safrole but not sensitive enough to detect safrole-DNA adduct in human samples. Using the nuclease P1 version of the (32)P-postlabeling technique, we detected the presence of safrole-DNA adduct in two out of 28 hepatic tissues from hepatocellular carcinoma patients, and only these two patients had a history of betel quid chewing lasting more than 10 years. From co-chromatography with the mass confirmed safrole-dGMPs, this safrole-DNA adduct was identified as N(2)-(trans-isosafrol-3'-yl) deoxyguanosine. These results suggest that betel quid-containing safrole might be involved in the pathogenesis of hepatocellular carcinoma in human beings and LC/MS has the potential to identify DNA adducts in clinical samples.

  5. "Danger" conditions increase sulfamethoxazole-protein adduct formation in human antigen-presenting cells.

    Science.gov (United States)

    Lavergne, S N; Wang, H; Callan, H E; Park, B K; Naisbitt, D J

    2009-11-01

    Antigen-presenting cells (APC) are thought to play an important role in the pathogenesis of drug-induced immune reactions. Various pathological factors can activate APC and therefore influence the immune equilibrium. It is interesting that several diseases have been associated with an increased rate of drug allergy. The aim of this project was to evaluate the impact of such "danger signals" on sulfamethoxazole (SMX) metabolism in human APC (peripheral blood mononuclear cells, Epstein-Barr virus-modified B lymphocytes, monocyte-derived dendritic cells, and two cell lines). APC were incubated with SMX (100 microM-2 mM; 5 min-24 h), in the presence of pathological factors: bacterial endotoxins (lipopolysaccharide and staphylococcal enterotoxin B), flu viral proteins, cytokines [interleukin (IL)-1beta, IL-6, IL-10; tumor necrosis factor-alpha; interferon-gamma; and transforming growth factor-beta], inflammatory molecules (prostaglandin E2, human serum complement, and activated protein C), oxidants (buthionine sulfoximine and H(2)O(2)), and hyperthermia (37.5-39.5 degrees C). Adduct formation was evaluated by enzyme-linked immunosorbent assay and confocal microscopy. SMX-protein adduct formation was time- and concentration-dependent for each cell type tested, in both physiological and danger conditions. A danger environment significantly increased the formation of SMX-protein adducts and significantly shortened the delay for their detection. An additive effect was observed with a combination of danger signals. Dimedone (chemical selectively binding cysteine sulfenic acid) and antioxidants decreased both baseline and danger-enhanced SMX-adduct formation. Various enzyme inhibitors were associated with a significant decrease in SMX-adduct levels, with a pattern varying depending on the cell type and the culture conditions. These results illustrate that danger signals enhance the formation of intracellular SMX-protein adducts in human APC. These findings might be relevant

  6. Simultaneous analysis of hemoglobin adducts of acrylamide and glycidamide by gas chromatography-mass spectrometry.

    Science.gov (United States)

    Pérez, H L; Cheong, H K; Yang, J S; Osterman-Golkar, S

    1999-10-01

    Acrylamide (AA) is a carcinogen in experimental animals. Glycidamide (GA), formed by metabolic epoxidation of AA, is believed to be responsible for the carcinogenicity of AA. Occupational exposure to AA has been assessed earlier by measurement of its adducts with N-terminal valine in hemoglobin. A background of AA adducts [N-(2-carbamoylethyl)valine (AAVal), about 30 pmol/g globin] was found in individuals without known exposure to the compound. The method previously available for adducts of GA only allowed analysis of samples from highly exposed individuals and showed similar levels of AAVal and adducts of GA [N-(2-hydroxy-2-carbamoylethyl)valine (GAVal)]. We have developed a sensitive method for simultaneous quantification of adducts of GA and AA, which is suitable down to low exposure levels. The method is based on the so-called modified Edman method, where globin is reacted with pentafluorophenyl isothiocyanate under neutral conditions. The valine adducts are then extracted in the form of pentafluorophenylthiohydantoin (PFPTH) derivatives. The analytical procedure included reaction of the PFPTH derivatives with acetic anhydride in order to protect the hydroxyl group of GAVal. The PFPTH derivatives of AAVal and GAVal were analyzed by gas chromatography/tandem mass spectrometry. ((2)H(3))AAVal-PFPTH was used as the internal standard. The method was applied to samples from 11 workers at an AA production plant, 1 nonexposed nonsmoker, and a few participants of a smoking cessation program. AAVal levels were in the range 27-1854 pmol/g globin. Recorded levels of GAVal were 3-12% of those of AAVal, suggesting that previous measurements of GAVal overestimate GAVal at low levels of exposure to AA.

  7. Insights into the conformation of aminofluorene-deoxyguanine adduct in a DNA polymerase active site.

    Science.gov (United States)

    Vaidyanathan, Vaidyanathan G; Liang, Fengting; Beard, William A; Shock, David D; Wilson, Samuel H; Cho, Bongsup P

    2013-08-09

    The active site conformation of the mutagenic fluoroaminofluorene-deoxyguanine adduct (dG-FAF, N-(2'-deoxyguanosin-8-yl)-7-fluoro-2-aminofluorene) has been investigated in the presence of Klenow fragment of Escherichia coli DNA polymerase I (Kfexo(-)) and DNA polymerase β (pol β) using (19)F NMR, insertion assay, and surface plasmon resonance. In a single nucleotide gap, the dG-FAF adduct adopts both a major-groove- oriented and base-displaced stacked conformation, and this heterogeneity is retained upon binding pol β. The addition of a non-hydrolysable 2'-deoxycytosine-5'-[(α,β)-methyleno]triphosphate (dCMPcPP) nucleotide analog to the binary complex results in an increase of the major groove conformation of the adduct at the expense of the stacked conformation. Similar results were obtained with the addition of an incorrect dAMPcPP analog but with formation of the minor groove binding conformer. In contrast, dG-FAF adduct at the replication fork for the Kfexo(-) complex adopts a mix of the major and minor groove conformers with minimal effect upon the addition of non-hydrolysable nucleotides. For pol β, the insertion of dCTP was preferred opposite the dG-FAF adduct in a single nucleotide gap assay consistent with (19)F NMR data. Surface plasmon resonance binding kinetics revealed that pol β binds tightly with DNA in the presence of correct dCTP, but the adduct weakens binding with no nucleotide specificity. These results provide molecular insights into the DNA binding characteristics of FAF in the active site of DNA polymerases and the role of DNA structure and sequence on its coding potential.

  8. GSTM1 and XRCC3 Polymorphisms: Effects on Levels of Aflatoxin B1-DNA Adducts

    Institute of Scientific and Technical Information of China (English)

    Xi-dai Long; Yun Ma; Zhou-lin Deng

    2009-01-01

    Objective: Aflatoxin B1 (AFB1), which can cause the formation of AFB1-DNA adducts, is a known human carcinogen. AFB1-exposure individuals with inherited susceptible carcinogen-metabolizing or repairing genotypes may experience an increased risk of genotoxicity. This study was designed to investigate whether the polymorphisms of two genes, the metabolic gene Glutathione S-transferase M1 (GSTM1) and DNA repair gene x-ray repair cross-complementing group 3 (XRCC3), can affect the levels of AFB1-DNA adducts in Guangxi Population (n= 966) from an AFB1-exposure area.Methods: AFB1-DNA adducts were measured by ELISA, and GSTM1 and XRCC3 codon 241 genotypes were identified by PCR-RFLP.Results: The GSTM1-null genotype [adjusted odds ratio (OR) = 2.09; 95% confidence interval (CI) = 1.61(2.71] and XRCC3 genotypes with 241 Met alleles [i.e., XRCC3-TM and -MM, adjusted ORs (95% CI) were 1.43 (1.08(1.89) and 2.42 (1.13(5.22), respectively] were significantly associated with higher levels of AFB1-DNA adducts. Compared with those individuals who did not express any putative risk genotypes as reference (OR = 1), individuals featuring all of the putative risk genotypes did experience a significantly higher DNA-adduct levels (adjusted ORs were 2.87 for GSTM1-null and XRCC3-TM; 5.83 for GSTM1-null and XRCC3-MM). Additionally, there was a positive joint effect between XRCC3 genotypes and long-term AFB1 exposure in the formation of AFB1-DNA adducts.Conclusion: These results suggest that individuals with susceptible genotypes GSTM1-null, XRCC3-TM, or XRCC3-MM may experience an increased risk of DNA damage elicited by AFB1 exposure.

  9. Synthesis of Mitomycin C and Decarbamoylmitomycin C N(2) deoxyguanosine-adducts.

    Science.gov (United States)

    Champeil, Elise; Cheng, Shu-Yuan; Huang, Bik Tzu; Conchero-Guisan, Marta; Martinez, Thibaut; Paz, Manuel M; Sapse, Anne-Marie

    2016-04-01

    Mitomycin C (MC) and Decarbamoylmitomycin C (DMC) - a derivative of MC lacking the carbamate on C10 - are DNA alkylating agents. Their cytotoxicity is attributed to their ability to generate DNA monoadducts as well as intrastrand and interstrand cross-links (ICLs). The major monoadducts generated by MC and DMC in tumor cells have opposite stereochemistry at carbon one of the guanine-mitosene bond: trans (or alpha) for MC and cis (or beta) for DMC. We hypothesize that local disruptions of DNA structure from trans or cis adducts are responsible for the different biochemical responses produced by MC and DMC. Access to DNA substrates bearing cis and trans MC/DMC lesions is essential to verify this hypothesis. Synthetic oligonucleotides bearing trans lesions can be obtained by bio-mimetic methods. However, this approach does not yield cis adducts. This report presents the first chemical synthesis of a cis mitosene DNA adduct. We also examined the stereopreference exhibited by the two drugs at the mononucleotide level by analyzing the formation of cis and trans adducts in the reaction of deoxyguanosine with MC or DMC using a variety of activation conditions. In addition, we performed Density Functional Theory calculations to evaluate the energies of these reactions. Direct alkylation under autocatalytic or bifunctional conditions yielded preferentially alpha adducts with both MC and DMC. DFT calculations showed that under bifunctional activation, the thermodynamically favored adducts are alpha, trans, for MC and beta, cis, for DMC. This suggests that the duplex DNA structure may stabilize/oriente the activated pro-drugs so that, with DMC, formation of the thermodynamically favored beta products are possible in a cellular environment.

  10. Reliability-Based Planning of Chloride Measurements

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Engelund, S.

    1996-01-01

    on measurements of the chloride content obtained from the given structure. In the present paper optimal planning of measurements of the chloride content in reinforced concrete structures is considered. It is shown how optimal experimental plans can be obtained using FORM-analysis. Bayesian statistics are used......In reinforced concrete structures corrosion is initiated when the chloride concentration around the reinforcement exceeds a threshold value. If corrosion starts then expensive repairs can be necessary. The estimation of the probability that corrosion has been initiated in a given structure is based...

  11. Chloride Ingress into Concrete under Water Pressure

    OpenAIRE

    Lund, Mia Schou; Sander, Lotte Braad; Grelk, Bent; Hansen, Kurt Kielsgaard

    2011-01-01

    The chloride ingress into concrete under water pressures of 100 kPa and 800 kPa have been investigated by experiments. The specimens were exposed to a 10% NaCl solution and water mixture. For the concrete having w/c = 0.35 the experimental results show the chloride diffusion coefficient at 800 kPa (~8 atm.) is 12 times greater than at 100 kPa (~1 atm.). For w/c = 0.45 and w/c = 0.55 the chloride diffusion coefficients are 7 and 3 times greater. This means that a change in pressure highly infl...

  12. Synthesis and structural studies of flavin and alloxazine adducts with O-nucleophiles

    Science.gov (United States)

    Ménová, Petra; Eigner, Václav; Čejka, Jan; Dvořáková, Hana; Šanda, Miloslav; Cibulka, Radek

    2011-10-01

    Five flavin (isoalloxazine) and alloxazine adducts with O-nucleophiles, 5-ethyl-4a-hydroxy-3,7,8,10-tetramethyl-4a,5-dihydroisoalloxazine ( 1a-OH), 5-ethyl-4a-hydroxy-3,10-dimethyl-4a,5-dihydroisoalloxazine ( 1b-OH), 5-ethyl-4a-methoxy-3,10-dimethyl-4a,5-dihydroisoalloxazine ( 1b-OMe), 5-ethyl-4a-hydroxy-1,3-dimethyl-4a,5-dihydroalloxazine ( 2a-OH) and 5-ethyl-4a-methoxy-1,3-dimethyl-4a,5-dihydroalloxazine ( 2a-OMe) were prepared from the corresponding salts, 5-ethyl-3,7,8,10-tetramethylisoalloxazinium ( 1a), 5-ethyl-3,10-dimethylisoalloxazinium ( 1b) and 5-ethyl-1,3-dimethylalloxazinium ( 2a) perchlorates by the addition of a nucleophile (water or methanol) and triethylamine as a base. The prepared adducts represent artificial analogs of flavin cofactor derivatives which are essential for the functioning of flavoenzymes. They were characterized by 1H and 13C NMR, HR-MS and UV-VIS spectra. In the cases of 1a-OH, 1b-OH, and 2a-OMe, the crystal structures were determined by X-ray diffraction. Flavinium and alloxazinium salts are in rapid equilibria with their adducts in water or methanolic solutions without the presence of a base. It was found that the equilibrium constants for flavin adduct formation is higher by six orders of magnitude than those for alloxazine derivatives. The presence of the sp 3 hybridized C4a atom in the molecule of the adducts causes deviation from planarity. The interplanar angles between benzene and the pyrimidine ring were found to be 31.5°, 23.64° and 15.62° for 1a-OH, 1b-OH and 2a-OMe, respectively, which are much higher than those of previously published adducts of C-nucleophiles. In isoalloxazine adducts, delocalization of π electrons between the N10-C10a and C10a-N1 bonds was detected while the length of the N10-C10a and C10a-N1 bonds in the alloxazine adducts corresponds to a double and single bond, respectively.

  13. Sodiated Sugar Structures: Cryogenic Ion Vibrational Spectroscopy of Na^+(GLUCOSE) Adducts

    Science.gov (United States)

    Voss, Jonathan; Kregel, Steven J.; Fischer, Kaitlyn C.; Garand, Etienne

    2017-06-01

    The recent discovery that ionic liquids help facilitate the dissolution of cellulose has renewed interest in understanding how ionic species interact with carbohydrates. Here we present infrared spectra in the 2800 - 3800 \\wn range of gas-phase mass-selected Na^+(Glucose) adducts. These adducts are further probed with IR-dip spectroscopy to yield conformer specific spectra of at least seven unique species. The relative abundances of conformers show that gas-phase interconversion barriers are sufficiently high to preserve the solution-phase populations. Additionally, our results demonstrate that mM concentrations of NaCl do not strongly perturb the anomeric ratio of glucose in solution.

  14. Active Oxygen Radical Scavenging Ability of Water-Soluble β-Alanine C60 Adducts

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Water-soluble β-alanine C60 adducts were synthesized, and the scavenging ability to superoxygen anion radical O2-and hydroxyl radicalOH were studied by autoxidation ofpyrogallol and chemiluminescence, respectively. It was found that β-alanine C60 adducts showed an excellent efficiency in eliminating superoxygen anion radical and hydroxyl radical. The 50% inhibition concentration (IC50) for superoxygen anion radical and hydroxyl radical were 0.15 mg/mL and 0.048 mg/mL, respectively. The difference should be mainly attributed to the different scavenging mechanisms.

  15. Olefin Hydroborations with Diamidocarbene–BH3 Adducts at Room Temperature

    Directory of Open Access Journals (Sweden)

    Dominika N. Lastovickova

    2016-09-01

    Full Text Available An isolable N,N’-diamidocarbene (DAC was previously shown to promote the B–H bond activation of various BH3 complexes. The resultant DAC–BH3 adducts facilitated olefin hydroborations under mild conditions and in the absence of exogenous initiators. The substrate scope for such transformations was further explored and is described herein. While organoboranes were obtained in quantitative yields from various terminal and internal olefins, use of the latter substrates resulted in intramolecular ring-expansion of the newly formed DAC–borane adducts.

  16. Effect of external electric field on Cyclodextrin-Alcohol adducts: A DFT study

    Indian Academy of Sciences (India)

    Kundan Baruah; Pradip Kr Bhattacharyya

    2015-06-01

    Effect of external electric fields on the interaction energy between cyclodextrin and alcohol was analyzed in the light of density functional theory (DFT) and density functional reactivity theory (DFRT). Stability of the cyclodextrin-alcohol adducts was measured in terms of DFT based reactivity descriptor, global hardness, electrophilicity, and energy of the HOMO. Stability of adducts was observed to be sensitive towards the strength as well as direction of the applied external electric field. In addition, reactivity pattern follows the maximum hardness and minimum electrophilicity principles.

  17. Reactivity of monofunctional cis-platinum adducts as a function of DNA sequence.

    OpenAIRE

    Malinge, J M; Leng, M

    1988-01-01

    The purpose of this work was to study the chemical reactivity of monofunctional cis-platinum-nucleic acid adducts as a function of nucleic acid sequence. The first part of the paper deals with the formation of these adducts. It is shown that the ternary nucleic acid-cis-platinum-ethidium bromide complexes in which ethidium bromide and nucleotide residues are cross-linked by cis-platinum, are relatively unstable at 37 degrees C. In the presence of acridine, ethidium bromide (but not cis-platin...

  18. Thermostability of photosystem I trimers and monomers from the cyanobacterium Thermosynechococcus elongatus

    Science.gov (United States)

    Shubin, Vladimir V.; Terekhova, Irina V.; Bolychevtseva, Yulia V.; El-Mohsnawy, Eithar; Rögner, Matthias; Mäntele, Werner; Kopczak, Marta J.; Džafić, Enela

    2017-05-01

    The performance of solar energy conversion into alternative energy sources in artificial systems highly depends on the thermostability of photosystem I (PSI) complexes Terasaki et al. (2007), Iwuchukwu et al. (2010), Kothe et al. (2013) . To assess the thermostability of PSI complexes from the thermophilic cyanobacterium Thermosynechococcus elongatus heating induced perturbations on the level of secondary structure of the proteins were studied. Changes were monitored by Fourier transform infrared (FT-IR) spectra in the mid-IR region upon slow heating (1 °C per minute) of samples in D2O phosphate buffer (pD 7.4) from 20 °C to 100 °C. These spectra showed distinct changes in the Amide I region of PSI complexes as a function of the rising temperature. Absorbance at the Amide I maximum of PSI monomers (centered around 1653 cm- 1), gradually dropped in two temperature intervals, i.e. 60-75 and 80-90 °C. In contrast, absorbance at the Amide I maximum of PSI trimers (around 1656 cm- 1) dropped only in one temperature interval 80-95 °C. The thermal profile of the spectral shift of α-helices bands in the region 1656-1642 cm- 1 confirms the same two temperature intervals for PSI monomers and only one interval for trimers. Apparently, the observed absorbance changes at the Amide I maximum during heating of PSI monomers and trimers are caused by deformation and unfolding of α-helices. The absence of absorbance changes in the interval of 20-65 °C in PSI trimers is probably caused by a greater stability of protein secondary structure as compared to that in monomers. Upon heating above 80 °C a large part of α-helices both in trimers and monomers converts to unordered and aggregated structures. Spectral changes of PSI trimers and monomers heated up to 100 °C are irreversible due to protein denaturation and non-specific aggregation of complexes leading to new absorption bands at 1618-1620 cm- 1. We propose that monomers shield the denaturation sensitive sides at the

  19. Photopolymerizable phosphate acrylates as comonomers in dental adhesives with or without triclosan monomer units

    Energy Technology Data Exchange (ETDEWEB)

    Melinte, Violeta [Petru Poni Institute of Macromolecular Chemistry, 41 A Gr. Ghica Voda Alley, 700487 Iasi (Romania); Buruiana, Tinca, E-mail: tbur@icmpp.ro [Petru Poni Institute of Macromolecular Chemistry, 41 A Gr. Ghica Voda Alley, 700487 Iasi (Romania); Aldea, Horia [Gr. T. Popa University of Medicine and Pharmacy, Faculty of Dentistry, Iasi (Romania); Matiut, Simona [Praxis Medical Investigations, 33 Independence, 700102 Iasi (Romania); Silion, Mihaela; Buruiana, Emil C. [Petru Poni Institute of Macromolecular Chemistry, 41 A Gr. Ghica Voda Alley, 700487 Iasi (Romania)

    2014-01-01

    Phosphate diacrylates (CO-DAP, TMP-DAP) based on castor oil or trimethylolpropane were synthesized and evaluated in dental adhesive formulations in comparison with 3-acryloyloxy-2-hydroxypropyl methacrylate phosphate (AMP-P). In an attempt to promote antibacterial activity, another photopolymerizable monomer (TCS-UMA) containing 5-chloro-2-(2,4-dichlorophenoxy)phenol moiety (triclosan) was prepared and incorporated in adhesive resins. Each of these monomers had a molecular structure confirmed by spectral methods. The photopolymerization rates for monomers (0.063–0.088 s{sup −1}) were lower than those determined in the monomer combinations (0.116–0.158 s{sup −1}) incorporating phosphate diacrylate (11 wt.%), BisGMA (33 wt.%), TEGDMA (10 wt.%), UDMA (10 wt.%) and HEMA (15 wt.%), the degree of conversion varying between 63.4 and 74.5%. The formed copolymers showed high values for water sorption (18.65–57.02 μg/mm{sup 3}) and water solubility (3.51–13.38 μg/mm{sup 3}), and the contact angle was dependent on the presence of CO-DAP (θ{sub F1}: 66.67°), TMP-DAP (θ{sub F2}: 55.05°) or AMP-P (θ{sub F3}: 52.90°) in the photocrosslinked specimens compared to the sample without phosphate monomer (θ{sub F4}: 82.14°). The scanning electron microscopy image of the dentin–resin composite interface after applying our F1 formulation (pH: 4.1) and its light-curing for 20 s supports the evidence of the formation of the hybrid layer with the tooth structure created by self-etching approach, with no gaps or cracks in the adhesive. A comparative analysis of the adhesion achieved with commercial adhesive systems (Single Bond Universal, C-Bond) rather indicates similarities than differences between them. The addition of triclosan methacrylate (1 wt.%) into the formulation inhibited the bacterial growth of the Streptococcus mutans and Escherichia coli in the direct contact area due to the covalently linked antibacterial monomer. - Highlights: • Synthesis of

  20. Comparison of immunoaffinity chromatography enrichment and nuclease P1 procedures for 32P-postlabelling analysis of PAH- DNA adducts

    NARCIS (Netherlands)

    Randerath, K.; Sriram, P.; Moorthy, B.; Aston, J.P.; Baan, R.A.; Berg, P.T.M. van den; Booth, E.D.; Watson, W.P.

    1998-01-01

    32P-postlabelling analysis for detecting DNA adducts formed by polycyclic aromatic compounds is one of the most widely used techniques for assessing genotoxicity associated with these compounds. In cases where the formation of adducts is extremely low, a crucial step in the analysis is an enrichment

  1. Immunohistochemical localization and quantification of the 3-(cystein-S-yl)-acetaminophen protein adduct in acetaminophen hepatotoxicity.

    Science.gov (United States)

    Roberts, D W; Bucci, T J; Benson, R W; Warbritton, A R; McRae, T A; Pumford, N R; Hinson, J A

    1991-02-01

    Acetaminophen overdose causes severe hepatotoxicity in humans and laboratory animals, presumably by metabolism to N-acetyl-p-benzoquinone imine: and binding to cysteine groups as 3-(cystein-S-yl)acetaminophen-protein adduct. Antiserum specific for the adduct was used immunohistochemically to demonstrate the formation, distribution, and concentration of this specific adduct in livers of treated mice and was correlated with cell injury as a function of dose and time. Within the liver lobule, immunohistochemically demonstrable adduct occurred in a temporally progressive, central-to-peripheral pattern. There was concordance between immunohistochemical staining and quantification of the adduct in hepatic 10,000g supernate, using a quantitative particle concentration fluorescence immunoassay. Findings include: 1) immunochemically detectable adduct before the appearance of centrilobular necrosis, 2) distinctive lobular zones of adduct localization with subsequent depletion during the progression of toxicity, 3) drug-protein binding in hepatocytes at subhepatotoxic doses and before depletion of total hepatic glutathione, 4) immunohistochemical evidence of drug binding in the nucleus, and 5) adduct in metabolically active and dividing hepatocytes and in macrophagelike cells in the regenerating liver.

  2. Validation of a food frequency questionnaire measurement of dietary acrylamide intake using hemoglobin adducts of acrylamide and glycidamide

    Science.gov (United States)

    Wilson, Kathryn M.; Vesper, Hubert W.; Tocco, Paula; Sampson, Laura; Rosén, Johan; Hellenäs, Karl-Erik; Törnqvist, Margareta; Willett, Walter C.

    2011-01-01

    Objective Acrylamide, a probable human carcinogen, is formed during high-heat cooking of many common foods. The validity of food frequency questionnaire (FFQ) measures of acrylamide intake has not been established. We assessed the validity of acrylamide intake calculated from an FFQ using a biomarker of acrylamide exposure. Methods We calculated acrylamide intake from an FFQ in the Nurses' Health Study II. We measured hemoglobin adducts of acrylamide and its metabolite, glycidamide, in a random sample of 296 women. Correlation and regression analyses were used to assess the relationship between acrylamide intake and adducts. Results The correlation between acrylamide intake and the sum of acrylamide and glycidamide adducts was 0.31 (95% CI: 0.20 – 0.41), adjusted for laboratory batch, energy intake, and age. Further adjustment for BMI, alcohol intake, and correction for random within-person measurement error in adducts gave a correlation of 0.34 (CI: 0.23 – 0.45). The intraclass correlation coefficient for the sum of adducts was 0.77 in blood samples collected 1 to 3 years apart in a subset of 45 women. Intake of several foods significantly predicted adducts in multiple regression. Conclusions Acrylamide intake and hemoglobin adducts of acrylamide and glycidamide were moderately correlated. Within-person consistency in adducts was high over time. PMID:18855107

  3. On the complexity and dynamics of in vivo Cisplatin-DNA adduct formation using HPLC/ICP-MS.

    Science.gov (United States)

    Ziehe, Matthias; Esteban-Fernández, Diego; Hochkirch, Ulrike; Thomale, Jürgen; Linscheid, Michael W

    2012-10-01

    In this work we present a methodology to measure the complex adduct spectrum caused by the interaction of Cisplatin with DNA. By using an optimized DNA digestion procedure we were able to show that the adduct spectrum in in vivo duplex DNA is much more complex than described so far. For the first time a high abundance of interstrand adducts has been detected by using HPLC/ESI-MS. These adducts could play a key role in the DNA repair mechanisms and the development of cellular resistance to Cisplatin. By species-unspecific isotope dilution analysis HPLC/ICP-MS measurements, we were able to study the kinetics of adduct formation. With these experiments we proved that after the initial formation of adducts a rearrangement occurs on the DNA-strands leading to significant changes in adduct patterns over time. Furthermore, the parameters of the species-unspecific isotope dilution analysis were optimized to allow measurements of specific adducts in the DNA of Cisplatin exposed cells.

  4. Measurement of HNE-protein adducts in human plasma and serum by ELISA—Comparison of two primary antibodies

    Directory of Open Access Journals (Sweden)

    Daniela Weber

    2013-01-01

    After modification and validation of the protocol for both antibodies, samples of two groups were analyzed: apparently healthy obese (n=62 and non-obese controls (n=15. Although the detected absolute values of HNE–protein adducts were different, depending on the antibody used, both ELISA methods showed significantly higher values of HNE–protein adducts in the obese group.

  5. Elevated levels of 4-hydroxynonenal-histidine Michael adduct in the hippocampi of patients with Alzheimer's disease.

    Science.gov (United States)

    Fukuda, Mitsugu; Kanou, Fumihisa; Shimada, Nobuko; Sawabe, Motoji; Saito, Yuko; Murayama, Shigeo; Hashimoto, Masakatsu; Maruyama, Naoki; Ishigami, Akihito

    2009-08-01

    Alzheimer's disease (AD) is among the most common causes of progressive cognitive impairment in humans and is characterized by neurodegeneration in the brain. Lipid peroxidation is thought to play a role in the pathogenesis of AD. 4-hydroxynonenal (HNE) results from peroxidation of polyunsaturated fatty acids and it in turn gives evidence of lipid peroxidation in vivo. HNE reacts with protein histidine residue to form a stable HNE-histidine Michael adduct. To clarify the influence of lipid peroxidation on the pathogenesis of AD, we measured HNE-histidine Michael adduct in hippocampi from four AD patients and four age-matched controls by means of semiquantitative immunohistochemistry using a specific antibody to cyclic hemiacetal type of HNE-histidine Michael adduct. This antibody does not react with the ring-opened form of HNE-histidine Michael adduct and the pyrrole form of HNE-lysine Michael adduct. The HNE adduct was detected in the hippocampi of both AD and control donors, especially in the CA2, CA3 and CA4 sectors. Immunoreactive intensity of HNE adduct in these sectors were significantly higher in AD patients than in the controls. The HNE adduct was found in the perikarya of pyramidal cells in the hippocampus. These results show that the hippocampi of patients with AD undergo lipid peroxidation and imply that this activity underlies the production of cytotoxic products such as HNE that are responsible for the pathogenesis of AD.

  6. Lifestyle, Environmental, and Genetic Predictors of Bulky DNA Adducts in a Study Population Nested within a Prospective Danish Cohort

    DEFF Research Database (Denmark)

    Eriksen, K. T.; Sørensen, M.; Autrup, H.

    2010-01-01

    Bulky DNA adducts are considered a potential biomarker of cancer risk. In this study, the association between various lifestyle, environmental, and genetic factors and the levels of bulky DNA adducts in peripheral leukocytes was examined in a study group nested within a population-based prospecti...

  7. Cigarette Smoking, BPDE-DNA Adducts, and Aberrant Promoter Methylations of Tumor Suppressor Genes (TSGs) in NSCLC from Chinese Population.

    Science.gov (United States)

    Jin, Yongtang; Xu, Peiwei; Liu, Xinneng; Zhang, Chunye; Tan, Cong; Chen, Chunmei; Sun, Xiaoyu; Xu, Yingchun

    2016-01-01

    Non-small cell lung cancer (NSCLC) is related to the genetic and epigenetic factors. The goal of this study was to determine association of cigarette smoking and BPDE-DNA adducts with promoter methylations of several genes in NSCLC. Methylation of the promoters of p16, RARβ, DAPK, MGMT, and TIMP-3 genes of tumor tissues from 199 lung cancer patients was analyzed with methylation-specific PCR (MSP), and BPDE-DNA adduct level in lung cancer tissue was obtained by ELISA. Level of BPDE-DNA adduct increased significantly in males, aged people (over 60 years), and smokers; however, no significant difference was found while comparing the BPDE-DNA adduct levels among different tumor types, locations, and stages. Cigarette smoking was also associated with increased BPDE-DNA adducts level (OR = 2.43, p > .05) and increased methylation level in at least 1 gene (OR = 5.22, p smoking also significantly increase the risk of p16 or DAPK methylation (OR = 3.02, p smoking for more than 40 pack-years (OR = 4.21, p smoking is significantly associated with the increase of BPDE-DNA adduct level, promoter hypermethylation of p16 and DAPK genes, while BPDE-DNA adduct was not significantly related to abnormal promoter hypermethylation in TSGs, suggesting that BPDE-DNA adducts and TSGs methylations play independent roles in NSCLC.

  8. Iridium-catalysed dehydrocoupling of aryl phosphine-borane adducts: synthesis and characterisation of high molecular weight poly(phosphinoboranes).

    Science.gov (United States)

    Paul, Ursula S D; Braunschweig, Holger; Radius, Udo

    2016-06-30

    The thermal dehydrogenative coupling of aryl phosphine-borane adducts with iridium complexes bearing a bis(phosphinite) pincer ligand is reported. This catalysis produces high molecular weight poly(phosphinoboranes) [ArPH-BH2]n (Ar = Ph, (p)Tol, Mes). Furthermore, we investigated the reactivity of these pincer complexes towards primary phosphines and their respective borane adducts on a stoichiometric scale.

  9. Diagnostic ions for the analysis of phenylalanine adducts of acrylamide and styrene by ESI-QTOF mass spectrometry.

    Science.gov (United States)

    Chu, Fong Lam; Sleno, Lekha; Yaylayan, Varoujan Antranik

    2013-10-30

    To facilitate the detection of acrylamide or styrene adduct of amino acids by mass spectrometry based techniques, phenylalanine was used as a representative amino acid and pyrolysis was employed in conjunction with isotope labeling technique as a microscale sample preparation tool to generate the reaction products. The residues remaining after the pyrolysis of phenylalanine/styrene, phenylalanine/acrylamide, and phenylalanine/glucose mixtures at 250 °C were analyzed by electrospray quadrupole time-of-flight (ESI-QqTOF) mass spectrometry to identify the adducts. The phenylalanine/acrylamide adduct was independently synthesized for confirmation. Characteristic product ions in the tandem mass spectra were found at m/z 191 for the acrylamide adduct and at m/z 262 and 190 for its double-addition product. On the other hand, an ion at m/z 224 was shown to be diagnostic of the styrene adduct. The ability of the m/z 224 ion to predict the presence of styrene adduct in a heated phenylalanine/glucose model system was tested and verified. Detailed isotope labeling analysis of the phenylalanine/glucose model further indicated the formation of a novel adduct that was consistent with the reaction of the Amadori product with styrene. Such diagnostic ions that are needed to develop MS/MS-based screening methodologies may accelerate in the future the detection of Michael-type adducts in food.

  10. Limit theorems in the imitative monomer-dimer mean-field model via Stein's method

    Science.gov (United States)

    Chen, Wei-Kuo

    2016-08-01

    We consider the imitative monomer-dimer model on the complete graph introduced in the work of Alberici et al. [J. Math. Phys. 55, 063301-1-063301-27 (2014)]. It was shown that this model is described by the monomer density and has a phase transition along certain coexistence curve, where the monomer and dimer phases coexist. More recently, it was understood [D. Alberici et al., Commun. Math. Phys. (published online, 2016)] that the monomer density exhibits the central limit theorem away from the coexistence curve and enjoys a non-normal limit theorem at criticality with normalized exponent 3/4. By reverting the model to a weighted Curie-Weiss model with hard core interaction, we establish the complete description of the fluctuation properties of the monomer density on the full parameter space via Stein's method of exchangeable pairs. Our approach recovers what were established in the work of Alberici et al. [Commun. Math. Phys. (published online, 2016)] and furthermore allows to obtain the conditional central limit theorems along the coexistence curve. In all these results, the Berry-Esseen inequalities for the Kolmogorov-Smirnov distance are given.

  11. Do CAD/CAM dentures really release less monomer than conventional dentures?

    Science.gov (United States)

    Steinmassl, Patricia-Anca; Wiedemair, Verena; Huck, Christian; Klaunzer, Florian; Steinmassl, Otto; Grunert, Ingrid; Dumfahrt, Herbert

    2017-06-01

    Computer-aided design (CAD)/computer-aided manufacturing (CAM) dentures are assumed to have more favourable material properties than conventionally fabricated dentures, among them a lower methacrylate monomer release. The aim of this study was to test this hypothesis. CAD/CAM dentures were generated from ten different master casts by using four different CAD/CAM systems. Conventional, heat-polymerised dentures served as control group. Denture weight and volume were measured; the density was calculated, and the denture surface area was assessed digitally. The monomer release after 7 days of water storage was measured by high-performance liquid chromatography. Whole You Nexteeth and Wieland Digital Dentures had significantly lower mean volume and weight than conventional dentures. Baltic Denture System and Whole You Nexteeth had a significantly increased density. Baltic Denture System had a significantly smaller surface area. None of the CAD/CAM dentures released significantly less monomer than the control group. All tested dentures released very low amounts of methacrylate monomer, but not significantly less than conventional dentures. A statistically significant difference might nevertheless exist in comparison to other, less recommendable denture base materials, such as the frequently used autopolymerising resins. CAD/CAM denture fabrication has numerous advantages. It enables the fabrication of dentures with lower resin volume and lower denture weight. Both could increase the patient comfort. Dentures with higher density might exhibit more favourable mechanical properties. The hypothesis that CAD/CAM dentures release less monomer than conventional dentures could, however, not be verified.

  12. Simulations of polymer brushes with charged end monomers under external electric fields

    Science.gov (United States)

    Ding, Huanda; Duan, Chao; Tong, Chaohui

    2017-01-01

    Using Langevin dynamics simulations, the response of neutral polymer brushes with charged terminal monomers to external electric fields has been investigated. The external electric field is equivalent to the field generated by the opposite surface charges on two parallel electrodes. The effects of charge valence of terminal monomers on the structure of double layers and overall charge balance near the two electrodes were examined. Using the charge density distributions obtained from simulations, the total electric field normal to the electrodes was calculated by numerically solving the Poisson equation. Under external electric fields, the total electric field across the two electrodes is highly non-uniform and in certain regions within the brush, the total electric field nearly vanishes. The probability distribution of electric force acting on one charged terminal monomer was obtained from simulations and how it affects the probability density distribution of terminal monomers was analyzed. The response of polymer brushes with charged terminal monomers to a strongly stretching external electric field was compared with that of uniformly charged polymer brushes.

  13. Epigallocatechin-3-Gallate Reduces Cytotoxic Effects Caused by Dental Monomers: A Hypothesis

    Science.gov (United States)

    Jiao, Yang; Ma, Sai; Wang, Yirong; Li, Jing; Shan, Lequn; Chen, Jihua

    2015-01-01

    Resin monomers from dental composite materials leached due to incomplete polymerization or biodegradation may cause contact allergies and damage dental pulp. The cytotoxicity of dental resin monomers is due to a disturbance of intracellular redox equilibrium, characterized by an overproduction of reactive oxygen species (ROS) and depletion of reduced glutathione (GSH). Oxidative stress caused by dental resin monomers leads to the disturbance of vital cell functions and induction of cell apoptosis in affected cells. The nuclear factor-erythroid 2-related factor 2 (Nrf2) pathway plays a key role in the cellular defense system against oxidative and electrophilic stress. Epigallocatechin-3-gallate (EGCG) can activate the Nrf2 pathway and induce expression of a multitude of antioxidants and phase II enzymes that can restore redox homeostasis. Therefore, here, we tested the hypothesis that EGCG-mediated protection against resin monomer cytotoxicity is mediated by activation of the Nrf2 pathway. This study will help to elucidate the mechanism of resin monomer cytotoxicity and provide information that will be helpful in improving the biocompatibility of dental resin materials. PMID:26489899

  14. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment.

    Science.gov (United States)

    Ortengren, U; Wellendorf, H; Karlsson, S; Ruyter, I E

    2001-12-01

    Water sorption and solubility of six proprietary composite resin materials were assessed, and monomers eluted from the organic matrix during water storage identified. Water sorption and solubility tests were carried out with the following storage times: 4 h, 24 h and 7, 60 and 180 days. After storage, water sorption and solubility were determined. Eluted monomers were analysed by high performance liquid chromatography (HPLC). Correlation between the retention time of the registered peak and the reference peak was observed, and UV-spectra confirmed the identity. The results showed an increase in water sorption until equilibrium for all materials with one exception. The solubility behaviour of the composite resin materials tested revealed variations, with both mass decrease and increase. The resin composition influences the water sorption and solubility behaviour of composite resin materials. The HPLC analysis of eluted components revealed that triethyleneglycol dimethacrylate (TEGDMA) was the main monomer released. Maximal monomer concentration in the eluate was observed after 7 days. During the test period, quantifiable quantities of urethanedimethacrylate (UEDMA) monomer were observed, whereas 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy)-phenyl]propane (Bis-GMA) was only found in detectable quantities. No detectable quantities of bisphenol-A were observed during the test period.

  15. Aβ1-42 monomers or oligomers have different effects on autophagy and apoptosis.

    Science.gov (United States)

    Guglielmotto, Michela; Monteleone, Debora; Piras, Antonio; Valsecchi, Valeria; Tropiano, Marta; Ariano, Stefania; Fornaro, Michele; Vercelli, Alessandro; Puyal, Julien; Arancio, Ottavio; Tabaton, Massimo; Tamagno, Elena

    2014-10-01

    The role of autophagy and its relationship with apoptosis in Alzheimer disease (AD) pathogenesis is poorly understood. Disruption of autophagy leads to buildup of incompletely digested substrates, amyloid-β (Aβ) peptide accumulation in vacuoles and cell death. Aβ, in turn, has been found to affect autophagy. Thus, Aβ might be part of a loop in which it is both the substrate of altered autophagy and its cause. Given the relevance of different soluble forms of Aβ1-42 in AD, we have investigated whether monomers and oligomers of the peptide have a differential role in causing altered autophagy and cell death. Using differentiated SK-N-BE neuroblastoma cells, we found that monomers hamper the formation of the autophagic BCL2-BECN1/Beclin 1 complex and activate the MAPK8/JNK1-MAPK9/JNK2 pathway phosphorylating BCL2. Monomers also inhibit apoptosis and allow autophagy with intracellular accumulation of autophagosomes and elevation of levels of BECN1 and LC3-II, resulting in an inhibition of substrate degradation due to an inhibitory action on lysosomal activity. Oligomers, in turn, favor the formation of the BCL2-BECN1 complex favoring apoptosis. In addition, they cause a less profound increase in BECN1 and LC3-II levels than monomers without affecting the autophagic flux. Thus, data presented in this work show a link for autophagy and apoptosis with monomers and oligomers, respectively. These studies are likely to help the design of novel disease modifying therapies.

  16. Interactions of univalent counterions with headgroups of monomers and dimers of an anionic surfactant.

    Science.gov (United States)

    Jakubowska, Anna

    2015-03-24

    Specific ion effects in solution are related to the hydrated ion size and ion hydration, electrostatic interactions, dispersion forces, ion effects on water structure, and ion modification of surface tension. In this study, we tried to identify which factor determines the ion specificity observed. The preference and energy of metal cations binding with the headgroups of dodecylsulfate (DS) monomers and dimers were determined by mass spectrometry. In the gas phase, cation binding to DS dimer headgroups depends strongly on the cation radius. On the other hand, the interactions between DS monomer headgroups and chaotropic ions depend on the cation polarizability, and the binding of kosmotropic cations to DS monomer headgroups strongly depends on the Gibbs free energies of ion hydration. DS dimers are related to surfactants having doubly charged headgroups, and DS monomers are related to surfactants with singly charged headgroups. Our spectrometric study of the strength of counterion binding to free monomers of a surfactant provides insight into surfactant-counterion interactions at micellar interfaces in bulk solution.

  17. Synthesis of a resin monomer-soluble polyrotaxane crosslinker containing cleavable end groups.

    Science.gov (United States)

    Seo, Ji-Hun; Nakagawa, Shino; Hirata, Koichiro; Yui, Nobuhiko

    2014-01-01

    A resin monomer-soluble polyrotaxane (PRX) crosslinker with cleavable end groups was synthesized to develop degradable photosetting composite resins. The PRX containing 50 α-cyclodextrins (α-CDs) with disulfide end groups was initially modified with n-butylamine to obtain a resin monomer-soluble PRX. The PRX containing 13 n-butyl groups per α-CD molecule was completely soluble in conventional resin monomers such as 2-hydroxyethyl methacrylate (HEMA) and urethane dimethacrylate (UDMA). The synthesized n-butyl-containing PRX was further modified with 2-aminoethyl methacrylate to provide crosslinkable acrylic groups onto PRX. The prepared resin monomer-soluble PRX crosslinker was successfully polymerized with a mixture of HEMA and UDMA to provide photosetting plastic. It was confirmed that the Vickers hardness of the prepared plastic was greatly decreased after treatment with dithiothreitol. This indicates that the resin monomer-soluble PRX crosslinker can be applied to design degradable photosetting plastics potentially used in the industrial or biomedical field.

  18. Synthesis of a resin monomer-soluble polyrotaxane crosslinker containing cleavable end groups

    Directory of Open Access Journals (Sweden)

    Ji-Hun Seo

    2014-11-01

    Full Text Available A resin monomer-soluble polyrotaxane (PRX crosslinker with cleavable end groups was synthesized to develop degradable photosetting composite resins. The PRX containing 50 α-cyclodextrins (α-CDs with disulfide end groups was initially modified with n-butylamine to obtain a resin monomer-soluble PRX. The PRX containing 13 n-butyl groups per α-CD molecule was completely soluble in conventional resin monomers such as 2-hydroxyethyl methacrylate (HEMA and urethane dimethacrylate (UDMA. The synthesized n-butyl-containing PRX was further modified with 2-aminoethyl methacrylate to provide crosslinkable acrylic groups onto PRX. The prepared resin monomer-soluble PRX crosslinker was successfully polymerized with a mixture of HEMA and UDMA to provide photosetting plastic. It was confirmed that the Vickers hardness of the prepared plastic was greatly decreased after treatment with dithiothreitol. This indicates that the resin monomer-soluble PRX crosslinker can be applied to design degradable photosetting plastics potentially used in the industrial or biomedical field.

  19. Design and Applications of Biodegradable Polyester Tissue Scaffolds Based on Endogenous Monomers Found in Human Metabolism

    Directory of Open Access Journals (Sweden)

    Devin G. Barrett

    2009-10-01

    Full Text Available Synthetic polyesters have deeply impacted various biomedical and engineering fields, such as tissue scaffolding and therapeutic delivery. Currently, many applications involving polyesters are being explored with polymers derived from monomers that are endogenous to the human metabolism. Examples of these monomers include glycerol, xylitol, sorbitol, and lactic, sebacic, citric, succinic, α-ketoglutaric, and fumaric acids. In terms of mechanical versatility, crystallinity, hydrophobicity, and biocompatibility, polyesters synthesized partially or completely from these monomers can display a wide range of properties. The flexibility in these macromolecular properties allows for materials to be tailored according to the needs of a particular application. Along with the presence of natural monomers that allows for a high probability of biocompatibility, there is also an added benefit that this class of polyesters is more environmentally friendly than many other materials used in biomedical engineering. While the selection of monomers may be limited by nature, these polymers have produced or have the potential to produce an enormous number of successes in vitro and in vivo.

  20. Quantitative comparison between in vivo DNA adduct formation from exposure to selected DNA-reactive carcinogens, natural background levels of DNA adduct formation and tumour incidence in rodent bioassays.

    Science.gov (United States)

    Paini, Alicia; Scholz, Gabriele; Marin-Kuan, Maricel; Schilter, Benoît; O'Brien, John; van Bladeren, Peter J; Rietjens, Ivonne M C M

    2011-09-01

    This study aimed at quantitatively comparing the occurrence/formation of DNA adducts with the carcinogenicity induced by a selection of DNA-reactive genotoxic carcinogens. Contrary to previous efforts, we used a very uniform set of data, limited to in vivo rat liver studies in order to investigate whether a correlation can be obtained, using a benchmark dose (BMD) approach. Dose-response data on both carcinogenicity and in vivo DNA adduct formation were available for six compounds, i.e. 2-acetylaminofluorene, aflatoxin B1, methyleugenol, safrole, 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline and tamoxifen. BMD(10) values for liver carcinogenicity were calculated using the US Environmental Protection Agency BMD software. DNA adduct levels at this dose were extrapolated assuming linearity of the DNA adduct dose response. In addition, the levels of DNA adducts at the BMD(10) were compared to available data on endogenous background DNA damage in the target organ. Although for an individual carcinogen the tumour response increases when adduct levels increase, our results demonstrate that when comparing different carcinogens, no quantitative correlation exists between the level of DNA adduct formation and carcinogenicity. These data confirm that the quantity of DNA adducts formed by a DNA-reactive compound is not a carcinogenicity predictor but that other factors such as type of adduct and mutagenic potential may be equally relevant. Moreover, comparison to background DNA damage supports the notion that the mere occurrence of DNA adducts above or below the level of endogenous DNA damage is neither correlated to development of cancer. These data strongly emphasise the need to apply the mode of action framework to understand the contribution of other biological effect markers playing a role in carcinogenicity.

  1. Reversible addition of the OH radical to p-cymene in the gas phase: multiple adduct formation. Part 2.

    Science.gov (United States)

    Alarcón, Paulo; Bohn, Birger; Zetzsch, Cornelius; Rayez, Marie-Thérèse; Rayez, Jean-Claude

    2014-08-28

    A flash photolysis-resonance fluorescence (FP-RF) system was used to study the p-cymene (PC) + OH reaction at temperatures between 299 and 349 K in helium. Triexponential functions were fitted to groups of observed OH decay curves according to a model considering a reversible addition to form two adducts as thermolabile reservoirs of OH. Compared to Part 1 of this paper, consideration of a second adduct strongly improved the fits to our measurements, and the rate constants for the major pathways were optimized between 299 and 349 K. The Arrhenius expression for the rate constant of the sum of OH addition and H-atom abstraction pathways was found to be kOH = 1.9 × 10(-12) exp[(610 ± 210) K/T] cm(3) s(-1). Rate constants of unimolecular decomposition reactions of the adducts were similar to other aromatic compounds with the following Arrhenius expressions: 1 × 10(12) exp[(-7600 ± 800) K/T] s(-1) for adduct 1 and 4 × 10(11) exp[(-8000 ± 300) K/T] s(-1) for adduct 2. Adduct yields increased and decreased with temperature for adduct 1 and 2, respectively, but were similar (∼0.4) around room temperature. Equilibrium constants yielded values for reaction enthalpies and entropies of adduct formations. While for one adduct reasonable agreement was obtained with theoretical predictions, there were significant deviations for the other adduct. This indicates the presence of more than two adduct isomers that were not accounted for in the reaction model. Quantum chemical calculations (DFT M06-2X/6-31G(d,p)) and RRKM kinetics were employed with the aim of clarifying the mechanism of the OH addition to PC. These calculations show that formation of adducts with OH in ortho positions to the isopropyl and methyl substituents is predominant (55% and 24%) to those with OH in ipso positions (21% and 3%). A large fraction (>90%) of the ipso-C3H7 adduct is predicted to react by dealkylation forming p-cresol (in the absence of oxygen) and isopropyl radicals. These theoretical

  2. Phosphorous bonding in PCl3:H2O adducts: A matrix isolation infrared and ab initio computational studies

    Science.gov (United States)

    Joshi, Prasad Ramesh; Ramanathan, N.; Sundararajan, K.; Sankaran, K.

    2017-01-01

    Non-covalent interaction between PCl3 and H2O was studied using matrix isolation infrared spectroscopy and ab initio computations. Computations indicated that the adducts are stabilized through novel P⋯O type phosphorus bonding and conventional Psbnd Cl⋯H type hydrogen bonding interactions, where the former adduct is the global minimum. Experimentally, the P⋯O phosphorus bonded adduct was identified in N2 matrix, which was evidenced from the shifts in the vibrational wavenumbers of the modes involving PCl3 and H2O sub-molecules. Atoms in Molecules and Natural Bond Orbital analyses have been performed to understand the nature of interactions in the phosphorus and hydrogen bonded adducts. Interestingly, experimental evidence for the formation of higher PCl3sbnd H2O adduct was also observed in N2 matrix.

  3. Bulky carcinogen-DNA adducts and exposure to environmental and occupational sources of polycyclic aromatic hydrocarbons. Influence of susceptibility genotypes on adduct level

    Energy Technology Data Exchange (ETDEWEB)

    Sabro Nielsen, P.

    1996-12-31

    PAH exposure, whether it is of occupational or environmental origin, is thought to result in an elevated risk of cancer especially in the lungs. DNA damage is considered an important step in the carcinogenic effect of PAH. Hence, methods that elucidate the steps in the carcinogenic process are important to understand the action of PAH. It may prove useful in the exposure assessment and in combination with classical epidemiological methods give better basis for risk estimation. The objective in this thesis was to evaluate the feasibility of the {sup 32}P-postlabeling method to detect carcinogen-DNA adducts for assessing exposure to DNA damaging compounds in different occupationally and environmentally exposed groups. The studies included groups, that have an elevated cancer risk due to occupational exposure to PAH. Exposure levels were supposed to be relatively low according to reports on occupational and environmental air quality programs. Another aim was to evaluate the influence of polymorphisms in metabolizing enzyme genes on DNA adduct levels. A third objective was to establish some kind of baseline DNA adduct level for individuals with supposed low exposure, and compare it to the more exposed groups. A fourth aim in these studies was to examine if biomarkers of genotoxic exposure could be useful in epidemiological studies to identify groups at risk and thereby contribute with better exposure estimates in the study of PAH related cancer risk. (EG).

  4. Catastrophic event modeling. [lithium thionyl chloride batteries

    Science.gov (United States)

    Frank, H. A.

    1981-01-01

    A mathematical model for the catastrophic failures (venting or explosion of the cell) in lithium thionyl chloride batteries is presented. The phenomenology of the various processes leading to cell failure is reviewed.

  5. Chloride Ingress into Concrete under Water Pressure

    DEFF Research Database (Denmark)

    Lund, Mia Schou; Sander, Lotte Braad; Grelk, Bent

    2011-01-01

    Pa (~8 atm.) is 12 times greater than at 100 kPa (~1 atm.). For w/c = 0.45 and w/c = 0.55 the chloride diffusion coefficients are 7 and 3 times greater. This means that a change in pressure highly influences the chloride ingress into the concrete and thereby the life length models for concrete structures.......The chloride ingress into concrete under water pressures of 100 kPa and 800 kPa have been investigated by experiments. The specimens were exposed to a 10% NaCl solution and water mixture. For the concrete having w/c = 0.35 the experimental results show the chloride diffusion coefficient at 800 k...

  6. Corneal Neurotoxicity Due to Topical Benzalkonium Chloride

    OpenAIRE

    Sarkar, Joy; Chaudhary, Shweta; Namavari, Abed; Ozturk, Okan; Chang, Jin-Hong; Yco, Lisette; Sonawane, Snehal; Khanolkar, Vishakha; Hallak, Joelle; Jain, Sandeep

    2012-01-01

    Topical application of benzalkonium chloride (BAK) to the eye causes dose-related corneal neurotoxicity. Corneal inflammation and reduction in aqueous tear production accompany neurotoxicity. Cessation of BAK treatment leads to recovery of corneal nerve density.

  7. Surface adsorption in strontium chloride ammines

    DEFF Research Database (Denmark)

    Ammitzbøll, Andreas L.; Lysgaard, Steen; Klukowska, Agata

    2013-01-01

    An adsorbed state and its implications on the ab- and desorption kinetics of ammonia in strontium chloride ammine is identified using a combination of ammonia absorption measurements, thermogravimetric analysis, and density functional theory calculations. During thermogravimetric analysis, ammoni...

  8. 75 FR 20625 - Barium Chloride From China

    Science.gov (United States)

    2010-04-20

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Revised schedule for the subject review. DATES: Effective Date: April 9, 2010. FOR FURTHER INFORMATION CONTACT:...

  9. Qualitative Determination of Nitrate with Triphenylbenzylphosphonium Chloride.

    Science.gov (United States)

    Berry, Donna A.; Cole, Jerry J.

    1984-01-01

    Discusses two procedures for the identification of nitrate, the standard test ("Brown Ring" test) and a new procedure using triphenylbenzylphosphonium chloride (TPBPC). Effectiveness of both procedures is compared, with the TPBPC test proving to be more sensitive and accurate. (JM)

  10. Analysis of the polycyclic aromatic hydrocarbon content of petrol and diesel engine lubricating oils and determination of DNA adducts in topically treated mice by 32P-postlabelling.

    Science.gov (United States)

    Carmichael, P L; Jacob, J; Grimmer, G; Phillips, D H

    1990-11-01

    Engine lubricating oils are known to accumulate carcinogenic polycyclic aromatic hydrocarbons (PAHs) during engine running. Oils from nine petrol-powered and 11 diesel-powered vehicles, in addition to samples of unused oil, were analysed for PAH content and ability to form DNA adducts when applied topically to mouse skin. The levels of 19 PAHs, determined by GC, were in total, approximately 22 times higher in used oils from petrol engines than in oils from diesel engines. Male Parkes mice were treated with 50 microliters of oil daily for 4 days before they were killed and DNA isolated from skin and lung tissue. DNA samples were analysed by nuclease P1-enhanced 32P-postlabelling. Used oils from both diesel and petrol engines showed several adduct spots on PEI-cellulose plates at total adduct levels of up to 0.57 fmol/microgram DNA [approximately 60 times greater than in experiments with samples of unused oil in which adduct levels (0.01-0.02 fmol adducts/microgram DNA) were close to the limit of detection]. Higher adduct levels were generally formed by petrol engine oils than by diesel engine oils. Lung DNA contained similar total adduct levels to those in skin although the adduct maps were less complex. Total adduct levels correlated with extent of oil use in the engine, the total PAH concentration in oils and with the concentrations of certain individual PAHs present in the oils. An adduct spot that co-eluted with that of the major benzo[a]pyrene-DNA adduct accounted for 9-26% of the total adducts in skin DNA, and approximately 8% of the adducts in lung DNA, of mice treated with petrol engine oils. A major, and as yet unidentified, adduct spot comprised up to 30% of the total adducts in skin DNA, and up to 89% of the total adducts in lung DNA, of these animals.

  11. Telomerization of Vinyl Chloride with Chloroform Initiated by Ferrous Chloride-Dimethylacetamide under Ultrasonic Conditions

    Directory of Open Access Journals (Sweden)

    Hua Qian

    2015-01-01

    Full Text Available Telomerization of vinyl chloride with chloroform was investigated using ferrous chloride-dimethylacetamide system, and 42.1% yield, more than four times the one reported before, was achieved. The addition of ultrasound further improved the reaction and yield was raised to 51.9% with trace byproducts at highly reduced reaction time and temperature. Ferrous chloride-dimethylacetamide under ultrasonic irradiation acts as a very efficient catalyst system for the 1 : 1 telomerization.

  12. The kinetics of the hydrogen chloride oxidation

    Directory of Open Access Journals (Sweden)

    Gonzalez Martinez Isai

    2013-01-01

    Full Text Available Hydrogen chloride (HCl oxidation has been investigated on technical membrane electrode assemblies in a cyclone flow cell. Influence of Nafion loading, temperature and hydrogen chloride mole fraction in the gas phase has been studied. The apparent kinetic parameters like reaction order with respect to HCl, Tafel slope and activation energy have been determined from polarization data. The apparent kinetic parameters suggest that the recombination of adsorbed Cl intermediate is the rate determining step.

  13. Cesium chloride-induced torsades de pointes

    OpenAIRE

    Wiens, Matthew; Gordon, Wendy; Baulcomb, Daisy; Mattman, Andre; Mock, Tom; Brown, Robert

    2009-01-01

    The chloride salt of cesium, a group 1A element, is gaining popularity as an alternative treatment of advanced cancers. Cesium chloride has primarily been used in cardiovascular research for arrhythmogenesis in animals because of its potassium-blocking effects. The present report describes a 45-year-old woman with metastatic breast cancer who experienced repeated episodes of torsades de pointes polymorphic ventricular tachycardia after several months of oral cesium therapy. There was a clear ...

  14. Photoionization of cold gas phase coronene and its clusters: Autoionization resonances in monomer, dimer, and trimer and electronic structure of monomer cation

    Energy Technology Data Exchange (ETDEWEB)

    Bréchignac, Philippe, E-mail: philippe.brechignac@u-psud.fr; Falvo, Cyril; Parneix, Pascal; Pino, Thomas; Pirali, Olivier [Institut des Sciences Moléculaires d’Orsay, CNRS UMR8214, Univ Paris-Sud, F-91405 Orsay (France); Garcia, Gustavo A.; Nahon, Laurent [Synchrotron SOLEIL, L’Orme des Merisiers, Saint-Aubin, B.P. 48, F-91192 Gif-sur-Yvette (France); Joblin, Christine; Kokkin, Damian; Bonnamy, Anthony [IRAP, Université de Toulouse 3 - CNRS, 9 Av. Colonel Roche, B.P. 44346, F-31028 Toulouse Cedex 4 (France); Mulas, Giacomo [INAF - Osservatorio Astronomico di Cagliari, via della scienza 5, I-09047 Selargius (Italy)

    2014-10-28

    Polycyclic aromatic hydrocarbons (PAHs) are key species encountered in a large variety of environments such as the Interstellar Medium (ISM) and in combustion media. Their UV spectroscopy and photodynamics in neutral and cationic forms are important to investigate in order to learn about their structure, formation mechanisms, and reactivity. Here, we report an experimental photoelectron-photoion coincidence study of a prototypical PAH molecule, coronene, and its small clusters, in a molecular beam using the vacuum ultraviolet (VUV) photons provided by the SOLEIL synchrotron facility. Mass-selected high resolution threshold photoelectron (TPES) and total ion yield spectra were obtained and analyzed in detail. Intense series of autoionizing resonances have been characterized as originating from the monomer, dimer, and trimer neutral species, which may be used as spectral fingerprints for their detection in the ISM by VUV absorption spectroscopy. Finally, a full description of the electronic structure of the monomer cation was made and discussed in detail in relation to previous spectroscopic optical absorption data. Tentative vibrational assignments in the near-threshold TPES spectrum of the monomer have been made with the support of a theoretical approach based on density functional theory.

  15. Effect of the XRCC1 codon 399 polymorphism on the repair of vinyl chloride metabolite-induced DNA damage

    Directory of Open Access Journals (Sweden)

    Li Yongliang

    2009-01-01

    Full Text Available Background: Recent epidemiologic evidence suggests that the common polymorphism at amino acid residue 399 of the x-ray cross complementing-1 (XRCC1 protein, a key component of the base excision repair (BER pathway for DNA damage, plays a significant role in the genetic variability of individuals in terms of the mutagenic damage they experience following exposure to the carcinogen vinyl chloride (VC. The aim of this study was to provide support for the biological plausibility of these epidemiologic observations with experimental data derived from cell lines in culture from individuals who were either homozygous wild-type or homozygous variant for this XRCC1 polymorphism following exposure to chloroethylene oxide (CEO, the active metabolite of VC, with measurement of the induced etheno-DNA adducts before and after repair. Materials and Methods: Immortalized lymphoblast cell lines from seven VC workers (four homozygous wild-type and three homozygous variant for the 399 XRCC1 polymorphism were exposed to CEO, and etheno-adenosine (εA adduct levels were determined by enzyme-linked immunosorbent assay (ELISA pre-exposure and at 0, 4, 8 and 24 h following exposure. Results: The average εA adduct levels were statistically significantly higher in the variant cells compared to the wild-type cells at 8 and 24 h following exposure (P< 0.05 with an overall average repair efficiency of 32% in the variant cells compared to 82% in the wild-type cells. Conclusion: These results are consistent with the epidemiologic findings of the types of VC-induced biomarkers observed in exposed individuals and the mutational spectra found in the resultant tumors as well as the key role that BER, especially XRCC1, plays in this carcinogenic pathway.

  16. Gene-diet interactions in exposure to heterocyclic aromatic amines and bulky DNA adduct levels in blood leukocytes.

    Science.gov (United States)

    Ho, Vikki; Peacock, Sarah; Massey, Thomas E; Godschalk, Roger W L; van Schooten, Frederik J; Chen, Jian; King, Will D

    2015-08-01

    Heterocyclic aromatic amines (HAAs), carcinogens produced in meat when cooked at high temperatures, are an emerging biologic explanation for the meat-colorectal cancer relationship. HAAs form DNA adducts; left unrepaired, adducts can induce mutations, which may initiate/promote carcinogenesis. The purpose of this research was to investigate the relationship between dietary HAAs, genetic susceptibility and bulky DNA adduct levels. Least squares regression was used to examine the relationship between dietary HAA exposure and bulky DNA adduct levels in blood measured using (32)P-postlabeling among 99 healthy volunteers. Gene-diet interactions between dietary HAAs and genetic factors relevant to the biotransformation of HAAs and DNA repair were also examined. No main effects of dietary HAAs on bulky DNA adduct levels was found. However, those with the putative NAT1 rapid acetylator phenotype had lower adduct levels than those with the slow acetylator phenotype (P = 0.02). Furthermore, having five or more 'at-risk' genotypes was associated with higher bulky DNA adduct levels (P = 0.03). Gene-diet interactions were observed between NAT1 polymorphisms and dietary HAAs (P adduct levels compared to lower intakes. This study provides evidence of a biologic relationship between dietary HAAs, genetic susceptibility and bulky DNA adduct formation. However, the lack of a strong main effect of HAAs suggests that dietary HAAs are not a large contributor to bulky DNA adducts in this population; future studies should consider relevant gene-diet interactions to clarify the role of HAAs in carcinogenesis.

  17. Structural water cluster as a possible proton acceptor in the adduct decay reaction of oat phototropin 1 LOV2 domain.

    Science.gov (United States)

    Chan, Ruby H; Bogomolni, Roberto A

    2012-09-06

    LOV domains (Light, Oxygen, Voltage) are the light-sensory modules of phototropins, the blue-light photoreceptor kinases in plants, and of a wide variety of flavoproteins found in all three domains of life. These 12 kDa modules bind a flavin chromophore (FMN or FAD) noncovalently and undergo a photochemical activation in which the sulfur atom of a conserved cysteine forms an adduct to the C(4a) carbon of the flavin. The adduct breaks spontaneously in a base-catalyzed reaction involving a rate-limiting proton-transfer step, regenerating the dark state in seconds. This photocycle involves chromophore and protein structural changes that activate the C-terminal serine/threonine kinase. Previous studies (Biochemistry 2007, 46, 7016-7021) showed that decreased hydration obtained at high glycerol concentrations stabilizes the adduct state in a manner similar to that attained at low temperatures, resulting in much longer adduct decay times. This kinetic effect was attributed to an increased protein rigidity that hindered structural fluctuations necessary for the decay reaction. In this work, we studied the adduct decay kinetics of oat phototropin 1 (phot1) LOV2 at varying hydration using a specially designed chamber that allowed for measurement of UV-visible and FTIR spectra of the same samples. Therefore, we obtained LOV protein concentrations, adduct decay kinetics, and the different populations of bound water by deconvolution of the broad water absorption peak around 3500 cm(-1). A linear dependence of the adduct decay rate constant on the concentration of double and triple hydrogen-bonded waters strongly suggests that the adduct decay is a pseudo-first-order reaction in which both the adduct and the strongly bound waters are reactants. We suggest that a cluster of strongly bound water functions as the proton acceptor in the rate-limiting step of adduct decay.

  18. Effect of Chloride Type on Penetration of Chloride Ions in Concrete

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The influence of chloride type on the diffusivity of chloride ions in concrete was studied by experiment. The result shows that the glectric resistance of concrete and the chloride diffusion coefficient are influenced by chloride type. For the same water/cement ratio (W/C), the diffusion coefficient D in KCl solution is larger than that in NaCl solution; however, the concrete resistance in KCl solution is smaller than that in NaCl solution. The experimental result is analyzed with theory of diffusion.

  19. Influence of Chloride-Ion Adsorption Agent on Chloride Ions in Concrete and Mortar

    Directory of Open Access Journals (Sweden)

    Gai-Fei Peng

    2014-04-01

    Full Text Available The influence of a chloride-ion adsorption agent (Cl agent in short, composed of zeolite, calcium aluminate hydrate and calcium nitrite, on the ingress of chloride ions into concrete and mortar has been experimentally studied. The permeability of concrete was measured, and the chloride ion content in mortar was tested. The experimental results reveal that the Cl agent could adsorb chloride ions effectively, which had penetrated into concrete and mortar. When the Cl agent was used at a dosage of 6% by mass of cementitious materials in mortar, the resistance to the penetration of chloride ions could be improved greatly, which was more pronounced when a combination of the Cl agent and fly ash or slag was employed. Such an effect is not the result of the low permeability of the mortar, but might be a result of the interaction between the Cl agent and the chloride ions penetrated into the mortar. There are two possible mechanisms for the interaction between the Cl agent and chloride ion ingress. One is the reaction between calcium aluminate hydrate in the Cl agent and chloride ions to form Friedel’s salt, and the other one is that calcium aluminate hydrate reacts with calcium nitrite to form AFm during the early-age hydration of mortar and later the NO2− in AFm is replaced by chloride ions, which then penetrate into the mortar, also forming Friedel’s salt. More research is needed to confirm the mechanisms.

  20. Anchoring Strength of Thin Aligned-Polymer Films Formed by Liquid Crystalline Monomer

    Science.gov (United States)

    Murashige, Takeshi; Fujikake, Hideo; Ikehata, Seiichiro; Sato, Fumio

    2003-04-01

    We have evaluated the polar anchoring strength of a thin molecule-aligned polymer film formed by a liquid crystalline monomer. The polymer film was obtained by photopolymerization of the monomer oriented by a rubbed polyimide alignment layer in a chamber filled with N2 gas. We fabricated a nematic liquid crystal cell using the thin aligned-polymer films as alignment layers, and then evaluated the anchoring strength of the polymer by measuring the optical retardation curve of the cell driven by voltages. The experimental result showed that the anchoring strength was one order of magnitude lower than that of a conventional rubbed polyimide alignment layer, and decreased with increasing the cure temperature of the monomer film.

  1. Theoretical Researches on the Recognizing Characteristics of Atrazine Imprinted Polymers with Different Functional Monomers

    Institute of Scientific and Technical Information of China (English)

    LIU Jun-Bo; SUN Jia-Ni; TANG Shan-Shan; CHEN Kai-Yin; JIN Rui-Fa

    2012-01-01

    As a widely used herbicide, the threat of atrazine to both environment and health of people has become the focus. Therefore, the research and analysis of atrazine are getting more important. In this work, the MIT was used to detect atrazine theoretically. Atrazine was taken as a template molecule. MAA, MMA and TFMAA were taken as the functional monomers, respectively. The geometry optimization, the nature of hydrogen bonds, the NBO charge, and the binding energies of the imprinted molecule with the functional monomers were investigated at the B3LYP/6-31g(d,p) level. Results indicated that atrazine had the strongest interaction with TFMAA. When the ratio of atrazine and TFMAA was 1:6, the amount of H-bond formed from atrazine and TFMAA was the largest. Moreover, TFMAA owned the largest binding energy with atrazine while MMA owned the smallest. The study is helpful to interpret experiment phenomena of molecular imprinting and select better functional monomers.

  2. Protein imprinted polymer using acryloyl-β-cyclodextrin and acrylamide as monomers

    Science.gov (United States)

    Zhang, Wei; Qin, Lei; Chen, Run-Run; He, Xi-Wen; Li, Wen-You; Zhang, Yu-Kui

    2010-02-01

    A novel protein imprinted polymer was prepared using acryloyl-β-cyclodextrin (β-CD) and acrylamide as monomers on the surface of silica gel. The bovine hemoglobin was used as template and β-CD was allowed to self-assemble with the template protein through hydrogen bonding and hydrophobic interaction. Polymerization was carried out in the presence of acrylamide as an assistant monomer, which resulted in a novel protein imprinted polymer. After removing the template, imprinted cavities with the shape and spatial distribution of functional groups were formed. Bovine serum albumin (BSA) cytochrome c (Cyt) and lysozyme (Lyz) were employed as non-template proteins to test the imprinting effect and the specific binding of bovine hemoglobin to the polymer. The results of the adsorption experiments indicated that such protein imprinted polymer, which was synthesized with β-CD and acrylamide as monomers, could selectively recognize the template protein.

  3. A new label dosimetry system based on pentacosa-diynoic acid monomer for low dose applications

    Science.gov (United States)

    Abdel-Fattah, A. A.; Abdel-Rehim, F.; Soliman, Y. S.

    2012-01-01

    The dosimetric characteristics of γ-radiation sensitive labels based on polyvinyl butyral (PVB) and a conjugated diacetylene monomer, 10,12-pentacosa-diynoic acid (PCDA) have been investigated using reflectance colorimeter. Two types of labels (colourless and yellow) based on PCDA monomer were prepared using an Automatic Film Applicator System. Upon γ-ray exposure, the colourless label turns progressively blue, while the yellow colour label turns to green then to dark blue. The colour intensity of the labels is proportional to the radiation absorbed dose. The useful dose range was 15 Gy-2 kGy depending on PCDA monomer concentration. The expanded uncertainty of dose measurement of the colourless label was 6.06 (2 σ).

  4. Close-packed polymer crystals from two-monomer-connected precursors

    Science.gov (United States)

    Lee, Hong-Joon; Jo, Yong-Ryun; Kumar, Santosh; Yoo, Seung Jo; Kim, Jin-Gyu; Kim, Youn-Joong; Kim, Bong-Joong; Lee, Jae-Suk

    2016-09-01

    The design of crystalline polymers is intellectually stimulating and synthetically challenging, especially when the polymerization of any monomer occurs in a linear dimension. Such linear growth often leads to entropically driven chain entanglements and thus is detrimental to attempts to realize the full potential of conjugated molecular structures. Here we report the polymerization of two-monomer-connected precursors (TMCPs) in which two pyrrole units are linked through a connector, yielding highly crystalline polymers. The simultaneous growth of the TMCP results in a close-packed crystal in polypyrrole (PPy) at the molecular scale with either a hexagonal close-packed or face-centred cubic structure, as confirmed by high-voltage electron microscopy, and the structure that formed could be controlled by simply changing the connector. The electrical conductivity of the TMCP-based PPy is almost 35 times that of single-monomer-based PPy, demonstrating its promise for application in diverse fields.

  5. Effect of trifunctional monomers and antioxidants on crosslinking reaction of polyethylene. [Electron beams

    Energy Technology Data Exchange (ETDEWEB)

    Pyun, H.C.; Lee, Y.C.; Kim, K.J.; Yoon, B.M. (Korea Advanced Energy Research Inst., Seoul (Republic of Korea))

    1982-06-01

    The crosslinking reaction and oxidative stability of low-density polyethylene were studied in the presence of trifunctional monomers and antioxidants with electron beams. The trifunctional monomers used in this study are Trimethylolpropane triacrylate (TMPTA), Trimethylolpropane trimethacrylate (TMPTM) and Triallyl cyanurate (TAC). And the antioxidants are Irganox 1010 (Pentaerythritoltetrakis(3-(3,5-di-t-butyl-4-hydroxyphenly)-propionate)), Santonox R(4,4'-Thio-bis(3-methyl-6-t-butylphenol)), Nocrac D(N-phenyl-..beta..-naphthylamine) and Bisphenol A(4,4'-Isopropylidene bisphenol). Among the monomers, TMPTA is the best crosslinking agent and provides polyethylene with oxidative stability. Among the antioxidants, Nocrac D is the best antioxidant for polyethylene.

  6. Testing of residual monomer content reduction possibility on acrilic resins quality

    Directory of Open Access Journals (Sweden)

    Kostić Milena

    2011-01-01

    Full Text Available Poly (methyl methacrylate (PMMA is material widely used in dentistry. Despite the various methods used to initiate the polymerization of acrylic resins, the conversion of monomer to polymer is not complete thus leaving some unreacted methyl methacrylate (MMA, known as residual monomer (RM, in denture structure. RM in dental acrylic resins has deleterious effects on their mechanical properties and their biocompatibility. The objective of the work was to test the residual monomer reduction possibility by applying the appropriate postpolymerization treatment as well as to determine the effects of this reduction on pressure yields stress and surface structure characteristics of the acrylic resins. Postpolymerization treatments and water storage induced reduction of RM amount in cold-polymerized acrylic resins improved their mechanical properties and the homogenized surface structure. After the polymerization of heat-polymerized acrylic resins the post-polymerization treatments for improving the quality of this material type are not necessary.

  7. Evaluation of the level of residual monomer in acrylic denture base materials having different polymerization properties.

    Science.gov (United States)

    Kalipçilar, B; Karaağaçlioğlu, L; Hasanreisoğlu, U

    1991-09-01

    The aim of this study was to evaluate the level of residual monomer in acrylic denture base materials having different polymerization properties. The investigation included a conventional-type acrylic cured under heat and pressure, as well as a pour-type resin polymerized by an injection-moulding technique at room temperature and under pressure. It was found that the residual monomer content ranged from 0.22-0.54% in pour-type resin, and from 0.23-0.52% in routinely used resins when the specimens were analysed by high performance liquid chromatography. These findings revealed that there were no significant differences between the two types of acrylic in terms of their residual monomer content.

  8. The potential of platinum-DNA adduct determination in ex vivo treated tumor fragments for the prediction of sensitivity to cisplatin chemotherapy

    NARCIS (Netherlands)

    Welters, M.J.P.; Braakhuis, B.J.M.; Jacobs-Bergmans, A.J.; Kegel, A.; Baan, R.A.; Vijgh, W.J.F. van der; Fichtinger-Schepman, A.M.J.

    1999-01-01

    Background: Response to cisplatin-therapy is assumed to be related to the formation of platinum (Pt)-DNA adducts. Measurement of these adducts prior to therapy could be of value to improve cisplatin based cancer therapy. Materials and methods: We determined Pt-GG and Pt-AG adduct levels by use of 32

  9. Metabolism of benzo(a)pyrene and identification of the major benzo(a)pyrene-DNA adducts in cultured human colon

    DEFF Research Database (Denmark)

    1978-01-01

    ]benzo(a)pyrene for another 24 hr and the binding to cellular DMA and protein was measured. Two adducts, formed between benzo(a)pyrene and DMA, have been isolated. The major adduct (72 to 100%) was formed between the 10-position of benzo(a)pyrene diol-epoxide I and the 2-amino group of guanine, and the minor adduct...

  10. Preparation of molecularly imprinted polymers using anacardic acid monomers derived from cashew nut shell liquid.

    Science.gov (United States)

    Philip, Joseph Y N; Buchweishaija, Joseph; Mkayula, Lupituko L; Ye, Lei

    2007-10-31

    The objective of this work was to use monomers from cashew ( Anacardium occidentale L.) nut shells to develop molecularly imprinted polymers. Cashew nut shell liquid (CNSL) is a cheap and renewable agro byproduct consisting of versatile monomers. Solvent-extracted CNSL contains over 80% anacardic acid (AnAc) with more than 90% degree of unsaturation in its C 15 side chain. From AnAc monomer, anacardanyl acrylate (AnAcr) and anacardanyl methacrylate (AnMcr) monomers were synthesized and their chemical structures were characterized by Fourier transform IR and NMR. Different imprinted bulk polymers based on AnAc, AnAcr, and AnMcr functional monomers have been prepared. In the present study, each functional monomer was separately copolymerized in toluene with ethylene glycol dimethacrylate and divinylbenzene as cross-linkers, using racemic propranolol as a model template. While the AnAc based polymer revealed a meager rebinding ability, the imprinted polymers made from AnAcr and AnMcr displayed highly specific propranolol binding. At a polymer concentration of 2 mg/mL, AnAcr and AnMcr based imprinted polymers were able to bind over 50% of trace propranolol (initial concentration 1.2 nM). Under the same condition propranolol uptake by the two nonimprinted control polymers was less than 20%. Chiral recognition properties of these polymers were further confirmed using tritium-labeled (S)-propranolol as a tracer in displacement experiments, suggesting that the apparent affinity of the imprinted chiral sites for the correct enantiomer is at least 10 times that of the mismatched (R)-propranolol. Moreover, cross reactivity studies of these polymers showed that the (S)-imprinted sites have higher cross-reactivity toward (R, S)-metoprolol than (R)-propranolol and (R)-timolol.

  11. Sustainable Poly(Ionic Liquids) for CO2 Capture Based on Deep Eutectic Monomers

    KAUST Repository

    Isik, Mehmet

    2016-10-05

    The design of high performance solid sorbent materials for CO2 capture is a technology which has been employed to mitigate global warming. However, the covalent incorporation of functionalities into polymeric supports usually involves multistep energy-intensive chemical processes. This fact makes the net CO2 balance of the materials negative even though they possess good properties as CO2 sorbents. Here we show a new family of polymers which are based on amines, amidoximes, and natural carboxylic acids and can be obtained using sustainable low energy processes. Thus, deep eutectic monomers based on natural carboxylic acids, amidoximes, and amines have been prepared by just mixing with cholinium type methacrylic ammonium monomer. The formation of deep eutectic monomers was confirmed by differential scanning calorimetry measurements. In all cases, the monomers displayed glass transition temperatures well below room temperature. Computational studies revealed that the formation of eutectic complexes lengthens the distance between the cation and the anion causing charge delocalization. The liquid nature of the resulting deep eutectic monomers (DEMs) made it possible to conduct a fast photopolymerization process to obtain the corresponding poly(ionic liquids). Materials were characterized by means of nuclear magnetic resonance, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction to evaluate the properties of the polymers. The polymers were then used as solid sorbents for CO2 capture. It has been shown that the polymers prepared with citric acid displayed better performance both experimentally and computationally. The current endeavor showed that sustainable poly(ionic liquids) based on deep eutectic monomers can be easily prepared to produce low-energy-cost alternatives to the materials currently being researched for CO2 capture. © 2016 American Chemical Society.

  12. Intra- And Inter-Monomer Interactions are Required to Synergistically Facilitate ATP Hydrolysis in HSP90

    Energy Technology Data Exchange (ETDEWEB)

    Cunningham, C.N.; Krukenberg, K.A.; Agard, D.A.

    2009-05-12

    Nucleotide-dependent conformational changes of the constitutively dimeric molecular chaperone Hsp90 are integral to its molecular mechanism. Recent full-length crystal structures (Protein Data Bank codes 2IOQ, 2CG9, AND 2IOP) of Hsp90 homologs reveal large scale quaternary domain rearrangements upon the addition of nucleotides. Although previous work has shown the importance of C-terminal domain dimerization for efficient ATP hydrolysis, which should imply cooperativity, other studies suggest that the two ATPases function independently. Using the crystal structures as a guide, we examined the role of intra- and intermonomer interactions in stabilizing the ATPase activity of a single active site within an intact dimer. This was accomplished by creating heterodimers that allow us to differentially mutate each monomer, probing the context in which particular residues are important for ATP hydrolysis. Although the ATPase activity of each monomer can function independently, we found that the activity of one monomer could be inhibited by the mutation of hydrophobic residues on the trans N-terminal domain (opposite monomer). Furthermore, these trans interactions are synergistically mediated by a loop on the cis middle domain. This loop contains hydrophobic residues as well as a critical arginine that provides a direct linkage to the {gamma}-phosphate of bound ATP. Small angle x-ray scattering demonstrates that deleterious mutations block domain closure in the presence of AMPPNP (5{prime}-adenylyl-{beta},{gamma}-imidodiphosphate), providing a direct linkage between structural changes and functional consequences. Together, these data indicate that both the cis monomer and the trans monomer and the intradomain and interdomain interactions cooperatively stabilize the active conformation of each active site and help explain the importance of dimer formation.

  13. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  14. Visible Light Curable Restorative Composites for Dental Applications Based on Epoxy Monomer

    Directory of Open Access Journals (Sweden)

    Alessandra Vitale

    2014-01-01

    Full Text Available A cationic photo-curable cycloaliphatic epoxy resin has been investigated as reactive monomer in blue light crosslinking process. We have demonstrated that camphorquinone is able to abstract labile hydrogen from the epoxy monomer, giving rise to the formation of carbon-centered radicals that are oxidized by the onium salt; a complete epoxy group conversion was reached after 50 s of irradiation. The presence of water up to 1 wt% was tolerated without any important detrimental effect on the kinetics of light-curing. The presence of the inorganic filler up to 65 wt% did not significantly influence the curing process.

  15. Theoretical investigation on functional monomer and solvent selection for molecular imprinting of tramadol

    Science.gov (United States)

    Fonseca, Matheus C.; Nascimento, Clebio S.; Borges, Keyller B.

    2016-02-01

    The purpose of this Letter was to study for the first time the interaction process of tramadol (TRM) with distinct functional monomers (FM) in the formation of molecular imprinted polymer (MIP), using density functional theory (DFT) calculations at B3LYP/6-31G(d,p). As result we were able to establish that the best MIP synthesis conditions are obtained with acrylic acid as FM in 1:3 molar ratio and with chloroform as solvent. This condition presented the lowest stabilization energy for the pre-polymerization complexes. Besides, the intermolecular hydrogen bonds found between the template molecule and functional monomers play a primary role to the complex stability.

  16. Sulfonated copolyimide membranes derived from a novel diamine monomer with pendant benzimidazole groups for fuel cells

    DEFF Research Database (Denmark)

    Li, Wei; Guo, Xiaoxia; Aili, David;

    2015-01-01

    . A series of sulfonated copolyimides (SPI) are prepared via random copolymerizatio of 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA) with a new diamine monomer with pendant benzimidazole groups, 2,2'-bis(4-(1H-benzo[d]imidazol-2-yl)phenoxy)benzidine (BIPOB), and a sulfonated diamine monomer 4,4'-bis...... pendant groups significantly improves the hydrolytic stability as well as the radical oxidative stability of the membranes. In addition, the SPI membranes exhibit high proton conductivities of 0.1 S cm(-1) in the fully hydrated state at 60 degrees C and high elastic modulus and tensile strength...

  17. Gamma radiation-induced grafting of acrylamide and dimethyl diallyl ammonium chloride onto starch.

    Science.gov (United States)

    Lv, Xiaohua; Song, Weiqiang; Ti, Yongzhou; Qu, Lingbo; Zhao, Zhiwei; Zheng, Hongjuan

    2013-01-30

    Corn starch graft copolymers were prepared from acrylamide/dimethyl diallyl ammonium chloride binary monomers (AM/DMDAAC) by a simultaneous radiation grafting method, and were characterized by FTIR and (1)H NMR techniques, weight measurement and titration method. The copolymers with high grafting ratio and high grafting efficiency of binary monomers were achieved at absorbed doses of 2 kGy and 3 kGy using a 6:9.8:4.2 (w/w/w) ratio of starch/AM/DMDAAC, but their cationic degrees were low. Grafting ratio, grafting efficiency and cationic degree of the copolymers increased with increasing AM content in comonomer mixtures and then decreased at 3kGy using a 6:14 ratio of starch:total comonomers, but their cationic degrees generally decreased with increasing AM content. The grafting ratio, the grafting efficiency and the cationic degree of the copolymers increased, but the grafting efficiency of DMDAAC decreased with varying starch/(AM+DMDAAC) ratio from 6:3 to 6:18 at 3 kGy by using a fixed 7:3 ratio of AM:DMDAAC.

  18. N-Acetyl Cysteine (NAC)-Directed Detoxification of Methacryloxylethyl Cetyl Ammonium Chloride (DMAE-CB).

    Science.gov (United States)

    Jiao, Yang; Ma, Sai; Li, Jing; Shan, Lequn; Wang, Yingjie; Tian, Min; Yang, Yanwei; Sun, Jinlong; Ban, Jinghao; Chen, Jihua

    2015-01-01

    Methacryloxylethyl cetyl ammonium chloride (DMAE-CB) is a polymerizable antibacterial monomer and has been proved as an effective strategy to achieve bioactive bonding with reliable bacterial inhibitory effects. However, the toxicity of DMAE-CB may hamper its wide application in clinical situations. Thus, this study was designed to investigate the toxicity of DMAE-CB and explore the possible protective effects of N-acetyl cysteine (NAC). High performance liquid chromatography (HPLC) and liquid chromatography-mass spectrometry (LC-MS) analysis showed that chemical binding of NAC and DMAE-CB occurred in a time dependent manner. Pre-incubation of fourty-eight hours is required for adequate reaction between DMAE-CB and NAC. DMAE-CB reduced human dental pulp cells (hDPCs) viability in a dose-dependent manner. The toxic effects of DMAE-CB were accompanied by increased reactive oxygen species (ROS) level and reduced glutathione (GSH) content. NAC alleviated DMAE-CB-induced oxidative stress. Annexin V/ Propidium Iodide (PI) staining and Hoechst 33342 staining indicated that DMAE-CB induced apoptosis. Collapsed mitochondrial membrane potential (MMP) and activation of caspase-3 were also observed after DMAE-CB treatment. NAC rescued hDPCs from DMAE-CB-induced apoptosis, accompanied by lower level of MMP loss and caspase-3 activity. This study assists to elucidate the mechanism underlying the cytotoxic effects of DMAE-CB and provides theoretical supports for the searching of effective strategies to reduce toxicity of quaternary ammonium dental monomers.

  19. One-pot synthesis of cyclic triamides with a triangular cavity from trans-stilbene and diphenylacetylene monomers.

    Science.gov (United States)

    Yokoyama, Akihiro; Maruyama, Takurou; Tagami, Kei; Masu, Hyuma; Katagiri, Kosuke; Azumaya, Isao; Yokozawa, Tsutomu

    2008-08-01

    Base-promoted self-condensation reactions of trans-stilbene and diphenylacetylene monomers bearing 4-alkylamino and 4'-methoxycarbonyl groups were investigated. Reactions of N-propyl monomers under pseudohigh-dilution conditions (a THF solution of monomer was added dropwise to a THF solution of LiHMDS) afforded the corresponding cyclic triamides in good yields. X-ray crystallographic analysis showed that these cyclic triamides possessed an almost equilateral triangle structure with a cavity surrounded by tilted benzene rings.

  20. Heating of food and haemoglobin adducts from carcinogens: possible precursor role of glycidol.

    Science.gov (United States)

    Hindsø Landin, H; Tareke, E; Rydberg, P; Olsson, U; Törnqvist, M

    2000-11-01

    Studies of adducts from reactive compounds to haemoglobin (Hb) by gas chromatography-tandem mass spectrometry according to the N-alkyl Edman method reveals the occurrence of N-(2,3-dihydroxypropyl)valine (diHOPrVal) at levels of 1-2 pmol/g Hb, in persons without known exposure. The hypothesis that this background originates from glycidol or related compounds during heating of food was tested in experiments with rats. Animals fed fried animal feed for 30 or 72 days showed an increase of the diHOPrVal level by about 50% compared with controls. Several arguments, such as the formation of reactive oxiranes by heat-induced dehydration of glycol configurations in glycerol and sugars, support the idea that glycidol (or e.g. glycidyl esters) are precursors of the adduct. In Hb samples, reduced for stabilisation of aldehyde adducts, relatively high levels of adducts determined as diHOPrVal were found, although without significant relation to frying of the feed. There is thus no indication that reduction in vivo of, for example, the Schiff base from glyceraldehyde, is a pathway for formation of the diHOPrVal. The background level of diHOPrVal in humans Hb is low, and the cancer risk associated with exposure to the specific alkylator-probably glycidol-formed in cooking, is therefore presumably low. The result implies, however, that low-molecular mass mutagenic oxiranes formed during the heating of food should be studied further.